An object memory bias induced by communicative reference.

Science.gov (United States)

Marno, Hanna; Davelaar, Eddy J; Csibra, Gergely

2016-01-01

In humans, a good proportion of knowledge, including knowledge about objects and object kinds, is acquired via social learning by direct communication from others. If communicative signals raise the expectation of social learning about objects, intrinsic (permanent) features that support object recognition are relevant to store into memory, while extrinsic (accidental) object properties can be ignored. We investigated this hypothesis by instructing participants to memorise shape-colour associations that constituted either an extrinsic object property (the colour of the box that contained the object, Experiment 1) or an intrinsic one (the colour of the object, Experiment 2). Compared to a non-communicative context, communicative presentation of the objects impaired participants' performance when they recalled extrinsic object properties, while their incidental memory of the intrinsic shape-colour associations was not affected. Communicative signals had no effect on performance when the task required the memorisation of intrinsic object properties. The negative effect of communicative reference on the memory of extrinsic properties was also confirmed in Experiment 3, where this property was object location. Such a memory bias suggests that referent objects in communication tend to be seen as representatives of their kind rather than as individuals. Copyright © 2015 Elsevier B.V. All rights reserved.

Object properties and cognitive load in the formation of associative memory during precision lifting.

Science.gov (United States)

Li, Yong; Randerath, Jennifer; Bauer, Hans; Marquardt, Christian; Goldenberg, Georg; Hermsdörfer, Joachim

2009-01-03

When we manipulate familiar objects in our daily life, our grip force anticipates the physical demands right from the moment of contact with the object, indicating the existence of a memory for relevant object properties. This study explores the formation and consolidation of the memory processes that associate either familiar (size) or arbitrary object features (color) with object weight. In the general task, participants repetitively lifted two differently weighted objects (580 and 280 g) in a pseudo-random order. Forty young healthy adults participated in this study and were randomly distributed into four groups: Color Cue Single task (CCS, blue and red, 9.8(3)cm(3)), Color Cue Dual task (CCD), No Cue (NC) and Size Cue (SC, 9.8(3) and 6(3)cm(3)) group. All groups performed a repetitive precision grasp-lift task and were retested with the same protocol after a 5-min pause. The CCD group was also required to simultaneously perform a memory task during each lift of differently weighted objects coded by color. The results show that groups lifting objects with arbitrary or familiar features successfully formed the association between object weight and manipulated object features and incorporated this into grip force programming, as observed in the different scaling of grip force and grip force rate for different object weights. An arbitrary feature, i.e., color, can be sufficiently associated with object weight, however with less strength than the familiar feature of size. The simultaneous memory task impaired anticipatory force scaling during repetitive object lifting but did not jeopardize the learning process and the consolidation of the associative memory.

An object memory bias induced by communicative reference

OpenAIRE

Marno, Hanna; Davelaar, Eddy J.; Csibra, Gergely

2015-01-01

In humans, a good proportion of knowledge, including knowledge about objects and object kinds, is acquired via social learning by direct communication from others. If communicative signals raise the expectation of social learning about objects, intrinsic (permanent) features that support object recognition are relevant to store into memory, while extrinsic (accidental) object properties can be ignored. We investigated this hypothesis by instructing participants to memorise shape-colour associ...

Preventing, detecting & revising flaws in object property expressions

CSIR Research Space (South Africa)

Keet, CM

2013-09-01

Full Text Available The OWL 2 DL ontology language is very expressive and has many features for declaring complex object property expressions. Standard reasoning services for OWL ontologies take these expressions as correct and according to the ontologist's intention...

Mathematical Properties Relevant to Geomagnetic Field Modeling

DEFF Research Database (Denmark)

Sabaka, Terence J.; Hulot, Gauthier; Olsen, Nils

2010-01-01

be directly measured. In this chapter, the mathematical foundation of global (as opposed to regional) geomagnetic field modeling is reviewed, and the spatial modeling of the field in spherical coordinates is focussed. Time can be dealt with as an independent variable and is not explicitly considered......Geomagnetic field modeling consists in converting large numbers of magnetic observations into a linear combination of elementary mathematical functions that best describes those observations.The set of numerical coefficients defining this linear combination is then what one refers.......The relevant elementary mathematical functions are introduced, their properties are reviewed, and how they can be used to describe the magnetic field in a source-free (such as the Earth’s neutral atmosphere) or source-dense (such as the ionosphere) environment is explained. Completeness and uniqueness...

Mathematical Properties Relevant to Geomagnetic Field Modeling

DEFF Research Database (Denmark)

Sabaka, Terence J.; Hulot, Gauthier; Olsen, Nils

2014-01-01

be directly measured. In this chapter, the mathematical foundation of global (as opposed to regional) geomagnetic field modeling is reviewed, and the spatial modeling of the field in spherical coordinates is focused. Time can be dealt with as an independent variable and is not explicitly considered......Geomagnetic field modeling consists in converting large numbers of magnetic observations into a linear combination of elementary mathematical functions that best describes those observations. The set of numerical coefficients defining this linear combination is then what one refers....... The relevant elementary mathematical functions are introduced, their properties are reviewed, and how they can be used to describe the magnetic field in a source-free (such as the Earth’s neutral atmosphere) or source-dense (such as the ionosphere) environment is explained. Completeness and uniqueness...

Equivocal Objects: The Problem of Women's Property in Daniel Deronda

Directory of Open Access Journals (Sweden)

Deborah Wynne

2008-04-01

Full Text Available Written between the passing of the first Married Women's Property Act in 1870 and the second Act of 1882, Eliot's final novel, 'Daniel Deronda' (1876, offers a powerful depiction of the social and legal disabilities faced by women. Her representations of objects and objectification centre on the concept of property, not only portable property such as jewellery and clothing, but also the idea of women themselves as property to be exchanged within the Victorian social system. This essay suggests that Eliot's awareness of the anomalies of the law and the equivocal positions held by women in terms of property ownership informs her depictions of the things women possess, and the sorts of meanings generated by objects. The essay argues that in 'Daniel Deronda' Eliot offers a powerful critique of women's exclusion from the patriarchal processes of primogeniture, and that her ironic use of terms such as 'own' and 'self-possession' in relation to her female characters helps to emphasise her need to move beyond the heroine who renounces the things of this world.

Balancing relevance criteria through multi-objective optimization

NARCIS (Netherlands)

van Doorn, J.; Odijk, D.; Roijers, D.M.; de Rijke, M.

2016-01-01

Offline evaluation of information retrieval systems typically focuses on a single effectiveness measure that models the utility for a typical user. Such a measure usually combines a behavior-based rank discount with a notion of document utility that captures the single relevance criterion of

Metaphor and the 'Emergent Property' Problem: A Relevance-Theoretic Approach

Directory of Open Access Journals (Sweden)

Robyn Carston

2008-08-01

Full Text Available The interpretation of metaphorical utterances often results in the attribution of emergent properties; these are properties which are neither standardly associated with the individual constituents of the utterance in isolation nor derivable by standard rules of semantic composition. For example, an utterance of ‘Robert is a bulldozer’ may be understood as attributing to Robert such properties as single-mindedness, insistence on having things done in his way, and insensitivity to the opinions/feelings of others, although none of these is included in the encyclopaedic information associated with bulldozers (earth-clearing machines. An adequate pragmatic account of metaphor interpretation must provide an explanation of the processes through which emergent properties are derived. In this paper, we attempt to develop an explicit account of the derivation process couched within the framework of relevance theory. The key features of our account are: (a metaphorical language use is taken to lie on a continuum with other cases of loose use, including hyperbole; (b metaphor interpretation is a wholly inferential process, which does not require associative mappings from one domain (e.g. machines to another (e.g. human beings; (c the derivation of emergent properties involves no special interpretive mechanisms not required for the interpretation of ordinary, literal utterances.

The development of infants' use of property-poor sounds to individuate objects.

Science.gov (United States)

Wilcox, Teresa; Smith, Tracy R

2010-12-01

There is evidence that infants as young as 4.5 months use property-rich but not property-poor sounds as the basis for individuating objects (Wilcox, Woods, Tuggy, & Napoli, 2006). The current research sought to identify the age at which infants demonstrate the capacity to use property-poor sounds. Using the task of Wilcox et al., infants aged 7 and 9 months were tested. The results revealed that 9- but not 7-month-olds demonstrated sensitivity to property-poor sounds (electronic tones) in an object individuation task. Additional results confirmed that the younger infants were sensitive to property-rich sounds (rattle sounds). These are the first positive results obtained with property-poor sounds in infants and lay the foundation for future research to identify the underlying basis for the developmental hierarchy favoring property-rich over property-poor sounds and possible mechanisms for change. Copyright © 2010 Elsevier Inc. All rights reserved.

Clustering Trajectories by Relevant Parts for Air Traffic Analysis.

Science.gov (United States)

Andrienko, Gennady; Andrienko, Natalia; Fuchs, Georg; Garcia, Jose Manuel Cordero

2018-01-01

Clustering of trajectories of moving objects by similarity is an important technique in movement analysis. Existing distance functions assess the similarity between trajectories based on properties of the trajectory points or segments. The properties may include the spatial positions, times, and thematic attributes. There may be a need to focus the analysis on certain parts of trajectories, i.e., points and segments that have particular properties. According to the analysis focus, the analyst may need to cluster trajectories by similarity of their relevant parts only. Throughout the analysis process, the focus may change, and different parts of trajectories may become relevant. We propose an analytical workflow in which interactive filtering tools are used to attach relevance flags to elements of trajectories, clustering is done using a distance function that ignores irrelevant elements, and the resulting clusters are summarized for further analysis. We demonstrate how this workflow can be useful for different analysis tasks in three case studies with real data from the domain of air traffic. We propose a suite of generic techniques and visualization guidelines to support movement data analysis by means of relevance-aware trajectory clustering.

Meeting Objectives and Relevant NDS Databases

International Nuclear Information System (INIS)

Simakov, S.P.

2012-01-01

The purpose of the meeting was to find ways to overcome the drawbacks of the NRT standard and benefit from the recent developments in primary radiation damage simulations, the Technical Meeting had the objectives to discuss: - revisiting the NRT standard with the purpose of improving it by the evaluation of uncertainties connected with recoil spectra and the energy partitioning model; - proposal of a new upgraded standard that will capture the annealing of defects in the recoil cascade on the basis of MD, BCA and other models. As an outcome of discussions, the definition of objectives and participating organisations for a new Coordinated Research Project (CRP) on this topic are expected

VLBA Observations of Low Luminosity Flat Spectrum Radio Galaxies and BL Lac Objects: Polarisation Properties

Science.gov (United States)

Bondi, M.; Dallacasa, D.; Stanghellini, C.; Marchã, M. J. M.

We obtained two-epoch VLBA observations at 5 GHz of a list of radio galaxies drawn from the 200 mJy sample (Marcha et al. 1996). The objects selected for milli-arcsecond scale observations are classified, on the basis of their optical spectroscopic and polarimetric properties, as BL Lac objects, normal weak line radio galaxies, broad line radio galaxies, and transition objects (those with intermediate properties). We present preliminary results on the radio polarization properties, on the milli-arcsecond scale, of objects with different optical properties and discuss structural variations detected from the two epochs.

Relevant optical properties for direct restorative materials.

Science.gov (United States)

Pecho, Oscar E; Ghinea, Razvan; do Amaral, Erika A Navarro; Cardona, Juan C; Della Bona, Alvaro; Pérez, María M

2016-05-01

To evaluate relevant optical properties of esthetic direct restorative materials focusing on whitened and translucent shades. Enamel (E), body (B), dentin (D), translucent (T) and whitened (Wh) shades for E (WhE) and B (WhB) from a restorative system (Filtek Supreme XTE, 3M ESPE) were evaluated. Samples (1 mm thick) were prepared. Spectral reflectance (R%) and color coordinates (L*, a*, b*, C* and h°) were measured against black and white backgrounds, using a spectroradiometer, in a viewing booth, with CIE D65 illuminant and d/0° geometry. Scattering (S) and absorption (K) coefficients and transmittance (T%) were calculated using Kubelka-Munk's equations. Translucency (TP) and opalescence (OP) parameters and whiteness index (W*) were obtained from differences of CIELAB color coordinates. R%, S, K and T% curves from all shades were compared using VAF (Variance Accounting For) coefficient with Cauchy-Schwarz inequality. Color coordinates and optical parameters were statistically analyzed using one-way ANOVA, Tukey's test with Bonferroni correction (α=0.0007). Spectral behavior of R% and S were different for T shades. In addition, T shades showed the lowest R%, S and K values, as well as the highest T%, TP an OP values. In most cases, WhB shades showed different color and optical properties (including TP and W*) than their corresponding B shades. WhE shades showed similar mean W* values and higher mean T% and TP values than E shades. When using whitened or translucent composites, the final color is influenced not only by the intraoral background but also by the color and optical properties of multilayers used in the esthetic restoration. Copyright © 2016 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Properties of amorphous rare earth-transition metal thin films relevant to thermomagnetic recording

International Nuclear Information System (INIS)

Biesterbos, J.W.M.

1979-01-01

Properties of amorphous RE-(Fe, Co) thin films relevant to thermomagnetic recording are reviewed. Attention is paid to the writing-, reading- and erasure process. The advantages and disadvantages of the amorphous materials are considered. Experimental data on the writing process are given

On the form factors of relevant operators and their cluster property

International Nuclear Information System (INIS)

Acerbi, C.; Valleriani, A.; Mussardo, G.

1996-09-01

We compute the Form Factors of the relevant scaling operators in a class of integrable models without internal symmetries by exploiting their cluster properties. Their identification is established by computing the corresponding anomalous dimensions by means of Delfino-Simonetti-Cardy sum-rule and further confirmed by comparing some universal ratios of the nearby non-integrable quantum field theories with their independent numerical determination. (author). 21 refs, 5 figs, 16 tabs

Is [Rural] Property Tax Relevant?

OpenAIRE

Villaveces-Niño, Marta-Juanita

2015-01-01

The present document presents the general notions and the definition of property taxation and, as part of it, the working definition of rural property taxation emphasizing that property taxation is a matter of “property” and rural property taxation is linked with rural property, specifically with land ownership. In addition, the document presents some facts about the performance of property taxation based on a secondary source of cross-country analysis. In order to giv...

Spectroscopic and thermal properties of uranium relevant to atomic schemes for laser isotope separation

International Nuclear Information System (INIS)

Ahmad, S.A.; Pandey, P.L.

1980-01-01

Spectroscopic data on uranium atom and thermal properties of uranium relevant to atomic schemes for laser isotope separation have been presented in this report. All the relevant spectroscopic data reported in literature so far, as well as some other parameters like photo-absorption cross sections, branching ratios, effects of magnetic and electric fields, evaluated using the existing data, have been presented here. Among the thermal properties, parameters like vapour pressure and number densities for U/Liquid U, U/URe 2 and U/UP systems, partition function, percentage population distribution in energy levels, thermal ionisation and velocities of uranium atom have been presented at different temperatures. Different possible collision processes are mentioned and cross-sections of U-U + charge-exchange and U + + e radiative recombination processes have been also evaluated. (author)

Connecting Organic Aerosol Climate-Relevant Properties to Chemical Mechanisms of Sources and Processing

Energy Technology Data Exchange (ETDEWEB)

Thornton, Joel [Univ. of Washington, Seattle, WA (United States)

2015-01-26

The research conducted on this project aimed to improve our understanding of secondary organic aerosol (SOA) formation in the atmosphere, and how the properties of the SOA impact climate through its size, phase state, and optical properties. The goal of this project was to demonstrate that the use of molecular composition information to mechanistically connect source apportionment and climate properties can improve the physical basis for simulation of SOA formation and properties in climate models. The research involved developing and improving methods to provide online measurements of the molecular composition of SOA under atmospherically relevant conditions and to apply this technology to controlled simulation chamber experiments and field measurements. The science we have completed with the methodology will impact the simulation of aerosol particles in climate models.

Active Prior Tactile Knowledge Transfer for Learning Tactual Properties of New Objects

Directory of Open Access Journals (Sweden)

Di Feng

2018-02-01

Full Text Available Reusing the tactile knowledge of some previously-explored objects (prior objects helps us to easily recognize the tactual properties of new objects. In this paper, we enable a robotic arm equipped with multi-modal artificial skin, like humans, to actively transfer the prior tactile exploratory action experiences when it learns the detailed physical properties of new objects. These experiences, or prior tactile knowledge, are built by the feature observations that the robot perceives from multiple sensory modalities, when it applies the pressing, sliding, and static contact movements on objects with different action parameters. We call our method Active Prior Tactile Knowledge Transfer (APTKT, and systematically evaluated its performance by several experiments. Results show that the robot improved the discrimination accuracy by around 10 % when it used only one training sample with the feature observations of prior objects. By further incorporating the predictions from the observation models of prior objects as auxiliary features, our method improved the discrimination accuracy by over 20 % . The results also show that the proposed method is robust against transferring irrelevant prior tactile knowledge (negative knowledge transfer.

Detecting and revising flaws in OWL object property expressions

CSIR Research Space (South Africa)

Keet, CM

2012-10-01

Full Text Available to the ontologist's intention. However, the more one can do, the higher the chance modelling flaws are introduced; hence, an unexpected or undesired classification or inconsistency may actually be due to a mistake in the object property box, not the class axioms. We...

Methylxanthines: properties and determination in various objects

Science.gov (United States)

Andreeva, Elena Yu; Dmitrienko, Stanislava G.; Zolotov, Yurii A.

2012-05-01

Published data on the properties and determination of caffeine, theophylline, theobromine and some other methylxanthines in various objects are surveyed and described systematically. Different sample preparation procedures such as liquid extraction from solid matrices and liquid-liquid, supercritical fluid and solid-phase extraction are compared. The key methods of analysis including chromatography, electrophoresis, spectrometry and electrochemical methods are discussed. Examples of methylxanthine determination in plants, food products, energy beverages, pharmaceuticals, biological fluids and natural and waste waters are given. The bibliography includes 393 references.

Methylxanthines: properties and determination in various objects

International Nuclear Information System (INIS)

Andreeva, Elena Yu; Dmitrienko, Stanislava G; Zolotov, Yurii A

2012-01-01

Published data on the properties and determination of caffeine, theophylline, theobromine and some other methylxanthines in various objects are surveyed and described systematically. Different sample preparation procedures such as liquid extraction from solid matrices and liquid–liquid, supercritical fluid and solid-phase extraction are compared. The key methods of analysis including chromatography, electrophoresis, spectrometry and electrochemical methods are discussed. Examples of methylxanthine determination in plants, food products, energy beverages, pharmaceuticals, biological fluids and natural and waste waters are given. The bibliography includes 393 references.

Why relevance theory is relevant for lexicography

DEFF Research Database (Denmark)

Bothma, Theo; Tarp, Sven

2014-01-01

This article starts by providing a brief summary of relevance theory in information science in relation to the function theory of lexicography, explaining the different types of relevance, viz. objective system relevance and the subjective types of relevance, i.e. topical, cognitive, situational...... that is very important for lexicography as well as for information science, viz. functional relevance. Since all lexicographic work is ultimately aimed at satisfying users’ information needs, the article then discusses why the lexicographer should take note of all these types of relevance when planning a new...... dictionary project, identifying new tasks and responsibilities of the modern lexicographer. The article furthermore discusses how relevance theory impacts on teaching dictionary culture and reference skills. By integrating insights from lexicography and information science, the article contributes to new...

The Netherlands XTC Toxicity (NeXT) study: objectives and methods of a study investigating causality, course, and clinical relevance

NARCIS (Netherlands)

de Win, Maartje M. L.; Jager, Gerry; Vervaeke, Hylke K. E.; Schilt, Thelma; Reneman, Liesbeth; Booij, Jan; Verhulst, Frank C.; den Heeten, Gerard J.; Ramsey, Nick F.; Korf, Dirk J.; van den Brink, Wim

2005-01-01

This paper describes the objectives and methods of The Netherlands XTC Toxicity (NeXT) study focussing on the causality, course, and clinical relevance of ecstasy neurotoxicity. Previous studies suggest that ecstasy (3,4 methylene-dioxymethamphetamine, MDMA, XTC) is toxic toward brain serotonin

Social Pre-treatment Modulates Attention Allocation to Transient and Stable Object Properties

Directory of Open Access Journals (Sweden)

Katalin Oláh

2016-10-01

Full Text Available Increasing evidence suggests that ostensive-communicative signals in social learning situations enable observers to focus their attention on the intrinsic features of an object (e.g. color at the expense of ignoring transient object properties (e.g. location. Here we investigated whether off-line social cues, presented as social primes, have the same power to modulate attention allocation to stable and transient object properties as on-line ostensive-communicative cues. The first part of the experiment consisted of a pre-treatment phase, where adult male participants either received intensive social stimulation or were asked to perform non-social actions. Then, they participated in a change detection test, where they watched pairs of pictures depicting an array of five objects. On the second picture, a change occurred compared to the first picture. One object changed either its location (moving forward or backward or was replaced by another object, and participants were required to indicate where the change had happened. We found that participants detected the change more successfully if it had happened in the location of the object; however, this difference was reduced following a socially intense pre-treatment phase. The results are discussed in relation to the claims of the natural pedagogy theory.

Domestic horses (Equus ferus caballus) fail to intuitively reason about object properties like solidity and weight.

Science.gov (United States)

Haemmerli, Sarah; Thill, Corinne; Amici, Federica; Cacchione, Trix

2018-05-01

From early infancy, humans reason about the external world in terms of identifiable, solid, cohesive objects persisting in space and time. This is one of the most fundamental human skills, which may be part of our innate conception of object properties. Although object permanence has been extensively studied across a variety of taxa, little is known about how non-human animals reason about other object properties. In this study, we therefore tested how domestic horses (Equus ferus caballus) intuitively reason about object properties like solidity and height, to locate hidden food. Horses were allowed to look for a food reward behind two opaque screens, only one of which had either the proper height or inclination to hide food rewards. Our results suggest that horses could not intuitively reason about physical object properties, but rather learned to select the screen with the proper height or inclination from the second set of 5 trials.

Electrical in situ and post-irradiation properties of ceramics relevant to fusion irradiation conditions

International Nuclear Information System (INIS)

Shikama, Tatsuo; Zinkle, S.J.

2002-01-01

Electrical properties of ceramic candidate materials for the next-generation nuclear fusion devices under relevant irradiation conditions are reviewed. A main focal point is placed on the degradation behavior of the electrical insulating ability during and after irradiation. Several important radiation induced effects play important roles: radiation induced conductivity, thermally stimulated electrical conductivity, radiation induced electrical charge separation, and radiation induced electromotive force. These phenomena will interact with each other under fusion relevant irradiation conditions. The design of electrical components for the next-generation fusion devices should take into account these complicated interactions among the radiation induced phenomena

Dopamine D4 receptor stimulation contributes to novel object recognition: Relevance to cognitive impairment in schizophrenia.

Science.gov (United States)

Miyauchi, Masanori; Neugebauer, Nichole M; Meltzer, Herbert Y

2017-04-01

Several atypical antipsychotic drugs (APDs) have high affinity for the dopamine (DA) D 4 receptor, but the relevance to the efficacy for the treatment of cognitive impairment associated with schizophrenia (CIAS) is poorly understood. The aim of this study was to investigate the effects of D 4 receptor stimulation or blockade on novel object recognition (NOR) in normal rats and on the sub-chronic phencyclidine (PCP)-induced novel object recognition deficit. The effect of the D 4 agonist, PD168077, and the D 4 antagonist, L-745,870, were studied alone, and in combination with clozapine and lurasidone. In normal rats, L-745,870 impaired novel object recognition, whereas PD168077 had no effect. PD168077 acutely reversed the sub-chronic phencyclidine-induced novel object recognition deficit. Co-administration of a sub-effective dose (SED) of PD168077 with a sub-effective dose of lurasidone also reversed this deficit, but a sub-effective dose of PD168077 with a sub-effective dose of clozapine, a more potent D 4 antagonist than lurasidone, did not reverse the sub-chronic phencyclidine-induced novel object recognition deficit. At a dose that did not induce a novel object recognition deficit, L-745,870 blocked the ability of clozapine, but not lurasidone, to reverse the novel object recognition deficit. D 4 receptor agonism has a beneficial effect on novel object recognition in sub-chronic PCP-treated rats and augments the cognitive enhancing efficacy of an atypical antipsychotic drug that lacks affinity for the D 4 receptor, lurasidone.

Design-relevant mechanical properties of 316-type stainless steels for superconducting magnets

Energy Technology Data Exchange (ETDEWEB)

Tobler, R.L.; Nishimura, A.; Yamamoto, J.

1996-08-01

Worldwide interest in austenitic alloys for structural applications in superconducting magnets has led to an expanded database for the 316-type stainless steels. We review the cryogenic mechanical properties of wrought, cast, and welded steels at liquid helium temperature (4 K), focussing on aspects of material behavior relevant to magnet design. Fracture mechanics parameters essential to structural reliability assessments are presented, including strength, toughness, and fatigue parameters that are critical for some component designs. (author). 105 refs.

Design-relevant mechanical properties of 316-type stainless steels for superconducting magnets

International Nuclear Information System (INIS)

Tobler, R.L.; Nishimura, A.; Yamamoto, J.

1996-08-01

Worldwide interest in austenitic alloys for structural applications in superconducting magnets has led to an expanded database for the 316-type stainless steels. We review the cryogenic mechanical properties of wrought, cast, and welded steels at liquid helium temperature (4 K), focussing on aspects of material behavior relevant to magnet design. Fracture mechanics parameters essential to structural reliability assessments are presented, including strength, toughness, and fatigue parameters that are critical for some component designs. (author). 105 refs

Study on Transient Properties of Levitated Object in Near-Field Acoustic Levitation

International Nuclear Information System (INIS)

Jia Bing; Chen Chao; Zhao Chunsheng

2011-01-01

A new approach to the study on the transient properties of the levitated object in near-field acoustic levitation (NFAL) is presented. In this article, the transient response characteristics, including the levitated height of an object with radius of 24 mm and thickness of 5 mm, the radial velocity and pressure difference of gas at the boundary of clearance between the levitated object and radiating surface (squeeze film), is calculated according to several velocity amplitudes of radiating surface. First, the basic equations in fluid areas on Arbitrary Lagrange-Euler (ALE) form are numerically solved by using streamline upwind petrov galerkin (SUPG) finite elements method. Second, the formed algebraic equations and solid control equations are solved by using synchronous alternating method to gain the transient messages of the levitated object and gas in the squeeze film. Through theoretical and numerical analyses, it is found that there is a oscillation time in the transient process and that the response time does not simply increase with the increasing of velocity amplitudes of radiating surface. More investigations in this paper are helpful for the understanding of the transient properties of levitated object in NFAL, which are in favor of enhancing stabilities and responsiveness of levitated object. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

Study on Transient Properties of Levitated Object in Near-Field Acoustic Levitation

Science.gov (United States)

Jia, Bing; Chen, Chao; Zhao, Chun-Sheng

2011-12-01

A new approach to the study on the transient properties of the levitated object in near-field acoustic levitation (NFAL) is presented. In this article, the transient response characteristics, including the levitated height of an object with radius of 24 mm and thickness of 5 mm, the radial velocity and pressure difference of gas at the boundary of clearance between the levitated object and radiating surface (squeeze film), is calculated according to several velocity amplitudes of radiating surface. First, the basic equations in fluid areas on Arbitrary Lagrange—Euler (ALE) form are numerically solved by using streamline upwind petrov galerkin (SUPG) finite elements method. Second, the formed algebraic equations and solid control equations are solved by using synchronous alternating method to gain the transient messages of the levitated object and gas in the squeeze film. Through theoretical and numerical analyses, it is found that there is a oscillation time in the transient process and that the response time does not simply increase with the increasing of velocity amplitudes of radiating surface. More investigations in this paper are helpful for the understanding of the transient properties of levitated object in NFAL, which are in favor of enhancing stabilities and responsiveness of levitated object.

BROA: An agent-based model to recommend relevant Learning Objects from Repository Federations adapted to learner profile

Directory of Open Access Journals (Sweden)

Paula A. Rodríguez

2013-03-01

Full Text Available Learning Objects (LOs are distinguished from traditional educational resources for their easy and quickly availability through Web-based repositories, from which they are accessed through their metadata. In addition, having a user profile allows an educational recommender system to help the learner to find the most relevant LOs based on their needs and preferences. The aim of this paper is to propose an agent-based model so-called BROA to recommend relevant LOs recovered from Repository Federations as well as LOs adapted to learner profile. The model proposed uses both role and service models of GAIA methodology, and the analysis models of the MAS-CommonKADS methodology. A prototype was built based on this model and validated to obtain some assessing results that are finally presented.

Scattering properties of electromagnetic waves from metal object in the lower terahertz region

Science.gov (United States)

Chen, Gang; Dang, H. X.; Hu, T. Y.; Su, Xiang; Lv, R. C.; Li, Hao; Tan, X. M.; Cui, T. J.

2018-01-01

An efficient hybrid algorithm is proposed to analyze the electromagnetic scattering properties of metal objects in the lower terahertz (THz) frequency. The metal object can be viewed as perfectly electrical conducting object with a slightly rough surface in the lower THz region. Hence the THz scattered field from metal object can be divided into coherent and incoherent parts. The physical optics and truncated-wedge incremental-length diffraction coefficients methods are combined to compute the coherent part; while the small perturbation method is used for the incoherent part. With the MonteCarlo method, the radar cross section of the rough metal surface is computed by the multilevel fast multipole algorithm and the proposed hybrid algorithm, respectively. The numerical results show that the proposed algorithm has good accuracy to simulate the scattering properties rapidly in the lower THz region.

Marble wastes and pig slurry improve the environmental and plant-relevant properties of mine tailings.

Science.gov (United States)

Kabas, S; Faz, A; Acosta, J A; Arocena, J M; Zornoza, R; Martínez-Martínez, S; Carmona, D M

2014-02-01

Poor soil fertility is often the biggest challenge to the establishment of vegetation in mine wastes deposits. We conducted field trials in the El Gorguel and El Lirio sites in SE Spain, two representative tailing ponds of similar properties except for pH, to understand the environmental and plant-relevant benefits of marble waste (MW) and pig slurry (PS) applications to mine tailings. Low pH (5.4) tailings (El Lirio) exhibit reduction of up to fourfold in bio-availability of metals as shown by the DTPA-Zn, Pb, water-soluble Zn, Pb and up to 3× for water-soluble Cd. Tailings in El Gorguel have high pH (7.4) and did not exhibit significant trends in the reductions of water-extractable Zn, Pb, Cd and Cu. Improvements to the edaphic (plant-relevant) properties of tailings after the amendments are not as sensitive to pH compared to the environmental characteristics. The two sites had increases in aggregate stability, organic matter (total N and organic C) although total N is higher in the El Gorguel (up to 212 μg N kg(-1)) than the El Lirio (up to 26 μg N kg(-1)). However, cation exchange capacities are similar in both sites at 15.2 cmol(+) kg(-1). We conclude that the characteristics, especially pH, of tailing materials significantly influence the fate of metals but not improvements to plant-relevant properties such as cation exchange capacity and aggregate stability 1 year after the application of MW and PS amendments.

Appropriate Objective Functions for Quantifying Iris Mechanical Properties Using Inverse Finite Element Modeling.

Science.gov (United States)

Pant, Anup D; Dorairaj, Syril K; Amini, Rouzbeh

2018-07-01

Quantifying the mechanical properties of the iris is important, as it provides insight into the pathophysiology of glaucoma. Recent ex vivo studies have shown that the mechanical properties of the iris are different in glaucomatous eyes as compared to normal ones. Notwithstanding the importance of the ex vivo studies, such measurements are severely limited for diagnosis and preclude development of treatment strategies. With the advent of detailed imaging modalities, it is possible to determine the in vivo mechanical properties using inverse finite element (FE) modeling. An inverse modeling approach requires an appropriate objective function for reliable estimation of parameters. In the case of the iris, numerous measurements such as iris chord length (CL) and iris concavity (CV) are made routinely in clinical practice. In this study, we have evaluated five different objective functions chosen based on the iris biometrics (in the presence and absence of clinical measurement errors) to determine the appropriate criterion for inverse modeling. Our results showed that in the absence of experimental measurement error, a combination of iris CL and CV can be used as the objective function. However, with the addition of measurement errors, the objective functions that employ a large number of local displacement values provide more reliable outcomes.

Effect of the social influence on topological properties of user-object bipartite networks

Science.gov (United States)

Liu, Jian-Guo; Hu, Zhaolong; Guo, Qiang

2013-11-01

Social influence plays an important role in analyzing online users' collective behaviors [Salganik et al., Science 311, 854 (2006)]. However, the effect of the social influence from the viewpoint of theoretical model is missing. In this paper, by taking into account the social influence and users' preferences, we develop a theoretical model to analyze the topological properties of user-object bipartite networks, including the degree distribution, average nearest neighbor degree and the bipartite clustering coefficient, as well as topological properties of the original user-object networks and their unipartite projections. According to the users' preferences and the global ranking effect, we analyze the theoretical results for two benchmark data sets, Amazon and Bookcrossing, which are approximately consistent with the empirical results. This work suggests that this model is feasible to analyze topological properties of bipartite networks in terms of the social influence and the users' preferences.

Characterization of Jatropha curcas L. Protein Cast Films with respect to Packaging Relevant Properties

OpenAIRE

Gofferje, Gabriele; Schmid, Markus; Stäbler, Andreas

2015-01-01

There is increasing research ongoing towards the substitution of petrochemical based plastics by more sustainable raw materials, especially in the field of bioplastics. Proteins of different types such as whey, casein, gelatine, or zein show potential beyond the food and feed industry as, for instance, the application in packaging. Protein based coatings provide different packaging relevant properties such as barrier against permanent gases, certain water vapour barrier, and mechanical resist...

Physical, chemical, and biological properties of radiocerium relevant to radiation protection guidelines

International Nuclear Information System (INIS)

Anon.

1978-01-01

Present knowledge of the relevant physical, chemical, and biological properties of radiocerium as a basis for establishing radiation protection guidelines is summarized. The first section of the report reviews the chemical and physical properties of radiocerium relative to the biological behavior of internally-deposited cerium and other lanthanides. The second section of the report gives the sources of radiocerium in the environment and the pathways to man. The third section of the report describes the metabolic fate of cerium in several mammalian species as a basis for predicting its metabolic fate in man. The fourth section of the report considers the biomedical effects of radiocerium in light of extensive animal experimentation. The last two sections of the report describe the history of radiation protection guidelines for radiocerium and summarize data required for evaluating the adequacy of current radiation protection guidelines. Each section begins with a summary of the most important findings that follow

Evolutionary relevance facilitates visual information processing.

Science.gov (United States)

Jackson, Russell E; Calvillo, Dusti P

2013-11-03

Visual search of the environment is a fundamental human behavior that perceptual load affects powerfully. Previously investigated means for overcoming the inhibitions of high perceptual load, however, generalize poorly to real-world human behavior. We hypothesized that humans would process evolutionarily relevant stimuli more efficiently than evolutionarily novel stimuli, and evolutionary relevance would mitigate the repercussions of high perceptual load during visual search. Animacy is a significant component to evolutionary relevance of visual stimuli because perceiving animate entities is time-sensitive in ways that pose significant evolutionary consequences. Participants completing a visual search task located evolutionarily relevant and animate objects fastest and with the least impact of high perceptual load. Evolutionarily novel and inanimate objects were located slowest and with the highest impact of perceptual load. Evolutionary relevance may importantly affect everyday visual information processing.

Objective image quality parameters of relevance in practice, measured for film-screen combinations - a contribution to quality assurance activities

International Nuclear Information System (INIS)

Angerstein, W.; Wolf, M.

1986-01-01

Objective measurement of the physico-technical parameters determining the image quality is the fastest and most accurate method of quality testing of the systems. The parameters in case of X-ray intensifying screens are imaging quality, servicable life, and mechanical properties. (orig./DG) [de

Evolutionary Relevance Facilitates Visual Information Processing

Directory of Open Access Journals (Sweden)

Russell E. Jackson

2013-07-01

Full Text Available Visual search of the environment is a fundamental human behavior that perceptual load affects powerfully. Previously investigated means for overcoming the inhibitions of high perceptual load, however, generalize poorly to real-world human behavior. We hypothesized that humans would process evolutionarily relevant stimuli more efficiently than evolutionarily novel stimuli, and evolutionary relevance would mitigate the repercussions of high perceptual load during visual search. Animacy is a significant component to evolutionary relevance of visual stimuli because perceiving animate entities is time-sensitive in ways that pose significant evolutionary consequences. Participants completing a visual search task located evolutionarily relevant and animate objects fastest and with the least impact of high perceptual load. Evolutionarily novel and inanimate objects were located slowest and with the highest impact of perceptual load. Evolutionary relevance may importantly affect everyday visual information processing.

A Numerical Method for Analyzing Electromagnetic Scattering Properties of a Moving Conducting Object

Directory of Open Access Journals (Sweden)

Lei Kuang

2014-01-01

Full Text Available A novel numerical approach is developed to analyze electromagnetic scattering properties of a moving conducting object based on the finite-difference time-domain (FDTD algorithm. Relativistic boundary conditions are implemented into the FDTD algorithm to calculate the electromagnetic field on the moving boundary. An improved technique is proposed to solve the scattered field in order to improve the computational efficiency and stability of solutions. The time-harmonic scattered field from a one-dimensional moving conducting surface is first simulated by the proposed approach. Numerical results show that the amplitude and frequency of the scattered field suffer a modulation shift. Then the transient scattered field is calculated, and broadband electromagnetic scattering properties of the moving conducting surface are obtained by the fast Fourier transform (FFT. Finally, the scattered field from a two-dimensional moving square cylinder is analyzed. The numerical results demonstrate the Doppler effect of a moving conducting object. The simulated results agree well with analytical results.

BIOPHYSICAL PROPERTIES OF NUCLEIC ACIDS AT SURFACES RELEVANT TO MICROARRAY PERFORMANCE.

Science.gov (United States)

Rao, Archana N; Grainger, David W

2014-04-01

Both clinical and analytical metrics produced by microarray-based assay technology have recognized problems in reproducibility, reliability and analytical sensitivity. These issues are often attributed to poor understanding and control of nucleic acid behaviors and properties at solid-liquid interfaces. Nucleic acid hybridization, central to DNA and RNA microarray formats, depends on the properties and behaviors of single strand (ss) nucleic acids (e.g., probe oligomeric DNA) bound to surfaces. ssDNA's persistence length, radius of gyration, electrostatics, conformations on different surfaces and under various assay conditions, its chain flexibility and curvature, charging effects in ionic solutions, and fluorescent labeling all influence its physical chemistry and hybridization under assay conditions. Nucleic acid (e.g., both RNA and DNA) target interactions with immobilized ssDNA strands are highly impacted by these biophysical states. Furthermore, the kinetics, thermodynamics, and enthalpic and entropic contributions to DNA hybridization reflect global probe/target structures and interaction dynamics. Here we review several biophysical issues relevant to oligomeric nucleic acid molecular behaviors at surfaces and their influences on duplex formation that influence microarray assay performance. Correlation of biophysical aspects of single and double-stranded nucleic acids with their complexes in bulk solution is common. Such analysis at surfaces is not commonly reported, despite its importance to microarray assays. We seek to provide further insight into nucleic acid-surface challenges facing microarray diagnostic formats that have hindered their clinical adoption and compromise their research quality and value as genomics tools.

BIOPHYSICAL PROPERTIES OF NUCLEIC ACIDS AT SURFACES RELEVANT TO MICROARRAY PERFORMANCE

Science.gov (United States)

Rao, Archana N.; Grainger, David W.

2014-01-01

Both clinical and analytical metrics produced by microarray-based assay technology have recognized problems in reproducibility, reliability and analytical sensitivity. These issues are often attributed to poor understanding and control of nucleic acid behaviors and properties at solid-liquid interfaces. Nucleic acid hybridization, central to DNA and RNA microarray formats, depends on the properties and behaviors of single strand (ss) nucleic acids (e.g., probe oligomeric DNA) bound to surfaces. ssDNA’s persistence length, radius of gyration, electrostatics, conformations on different surfaces and under various assay conditions, its chain flexibility and curvature, charging effects in ionic solutions, and fluorescent labeling all influence its physical chemistry and hybridization under assay conditions. Nucleic acid (e.g., both RNA and DNA) target interactions with immobilized ssDNA strands are highly impacted by these biophysical states. Furthermore, the kinetics, thermodynamics, and enthalpic and entropic contributions to DNA hybridization reflect global probe/target structures and interaction dynamics. Here we review several biophysical issues relevant to oligomeric nucleic acid molecular behaviors at surfaces and their influences on duplex formation that influence microarray assay performance. Correlation of biophysical aspects of single and double-stranded nucleic acids with their complexes in bulk solution is common. Such analysis at surfaces is not commonly reported, despite its importance to microarray assays. We seek to provide further insight into nucleic acid-surface challenges facing microarray diagnostic formats that have hindered their clinical adoption and compromise their research quality and value as genomics tools. PMID:24765522

Task-relevant perceptual features can define categories in visual memory too.

Science.gov (United States)

Antonelli, Karla B; Williams, Carrick C

2017-11-01

Although Konkle, Brady, Alvarez, and Oliva (2010, Journal of Experimental Psychology: General, 139(3), 558) claim that visual long-term memory (VLTM) is organized on underlying conceptual, not perceptual, information, visual memory results from visual search tasks are not well explained by this theory. We hypothesized that when viewing an object, any task-relevant visual information is critical to the organizational structure of VLTM. In two experiments, we examined the organization of VLTM by measuring the amount of retroactive interference created by objects possessing different combinations of task-relevant features. Based on task instructions, only the conceptual category was task relevant or both the conceptual category and a perceptual object feature were task relevant. Findings indicated that when made task relevant, perceptual object feature information, along with conceptual category information, could affect memory organization for objects in VLTM. However, when perceptual object feature information was task irrelevant, it did not contribute to memory organization; instead, memory defaulted to being organized around conceptual category information. These findings support the theory that a task-defined organizational structure is created in VLTM based on the relevance of particular object features and information.

Relevant Scatterers Characterization in SAR Images

Science.gov (United States)

Chaabouni, Houda; Datcu, Mihai

2006-11-01

Recognizing scenes in a single look meter resolution Synthetic Aperture Radar (SAR) images, requires the capability to identify relevant signal signatures in condition of variable image acquisition geometry, arbitrary objects poses and configurations. Among the methods to detect relevant scatterers in SAR images, we can mention the internal coherence. The SAR spectrum splitted in azimuth generates a series of images which preserve high coherence only for particular object scattering. The detection of relevant scatterers can be done by correlation study or Independent Component Analysis (ICA) methods. The present article deals with the state of the art for SAR internal correlation analysis and proposes further extensions using elements of inference based on information theory applied to complex valued signals. The set of azimuth looks images is analyzed using mutual information measures and an equivalent channel capacity is derived. The localization of the "target" requires analysis in a small image window, thus resulting in imprecise estimation of the second order statistics of the signal. For a better precision, a Hausdorff measure is introduced. The method is applied to detect and characterize relevant objects in urban areas.

Fixations on objects in natural scenes: dissociating importance from salience

Directory of Open Access Journals (Sweden)

Bernard Marius e’t Hart

2013-07-01

Full Text Available The relation of selective attention to understanding of natural scenes has been subject to intense behavioral research and computational modeling, and gaze is often used as a proxy for such attention. The probability of an image region to be fixated typically correlates with its contrast. However, this relation does not imply a causal role of contrast. Rather, contrast may relate to an object’s importance for a scene, which in turn drives attention. Here we operationalize importance by the probability that an observer names the object as characteristic for a scene. We modify luminance contrast of either a frequently named (common/important or a rarely named (rare/unimportant object, track the observers’ eye movements during scene viewing and ask them to provide keywords describing the scene immediately after.When no object is modified relative to the background, important objects draw more fixations than unimportant ones. Increases of contrast make an object more likely to be fixated, irrespective of whether it was important for the original scene, while decreases in contrast have little effect on fixations. Any contrast modification makes originally unimportant objects more important for the scene. Finally, important objects are fixated more centrally than unimportant objects, irrespective of contrast.Our data suggest a dissociation between object importance (relevance for the scene and salience (relevance for attention. If an object obeys natural scene statistics, important objects are also salient. However, when natural scene statistics are violated, importance and salience are differentially affected. Object salience is modulated by the expectation about object properties (e.g., formed by context or gist, and importance by the violation of such expectations. In addition, the dependence of fixated locations within an object on the object’s importance suggests an analogy to the effects of word frequency on landing positions in reading.

Using Bayesian Population Viability Analysis to Define Relevant Conservation Objectives.

Directory of Open Access Journals (Sweden)

Adam W Green

Full Text Available Adaptive management provides a useful framework for managing natural resources in the face of uncertainty. An important component of adaptive management is identifying clear, measurable conservation objectives that reflect the desired outcomes of stakeholders. A common objective is to have a sustainable population, or metapopulation, but it can be difficult to quantify a threshold above which such a population is likely to persist. We performed a Bayesian metapopulation viability analysis (BMPVA using a dynamic occupancy model to quantify the characteristics of two wood frog (Lithobates sylvatica metapopulations resulting in sustainable populations, and we demonstrate how the results could be used to define meaningful objectives that serve as the basis of adaptive management. We explored scenarios involving metapopulations with different numbers of patches (pools using estimates of breeding occurrence and successful metamorphosis from two study areas to estimate the probability of quasi-extinction and calculate the proportion of vernal pools producing metamorphs. Our results suggest that ≥50 pools are required to ensure long-term persistence with approximately 16% of pools producing metamorphs in stable metapopulations. We demonstrate one way to incorporate the BMPVA results into a utility function that balances the trade-offs between ecological and financial objectives, which can be used in an adaptive management framework to make optimal, transparent decisions. Our approach provides a framework for using a standard method (i.e., PVA and available information to inform a formal decision process to determine optimal and timely management policies.

BL Lacertae objects

International Nuclear Information System (INIS)

Miller, J.S.

1978-01-01

An overview is given of the principal characteristics and problems associated with the prototype BL Lacertae. The most important characteristics of this group and its relevance, the consideration of a few particular objects in moderate detail, the relation between these objects QSOs, and normal galaxies, and finally the possible physical nature of BL Lac objects and the important questions they raise are treated. 15 references

Spectral properties of blazars. I. Objects observed in the far-ultraviolet. II. An X-ray observed sample

International Nuclear Information System (INIS)

Ghisellini, G.; Maraschi, L.; Treves, A.; Tanzi, E. G.; Milano Universita, Italy; CNR, Istituto di Fisica Cosmica, Milan, Italy)

1986-01-01

All blazars observed with the IUE are studied and shown to form a well-defined subgroup according to their spectral properties. These properties are discussed with respect to theoretical models and are compared with those of quasars. Radio, ultraviolet, and X-ray fluxes are used to construct composite spectral indices, and systematic differences between X-ray selected and otherwise selected objects are discussed. It is confirmed that X-ray selected objects have flatter overall spectra, and are therefore weaker radio emitters relative to their X-ray emission than objects selected otherwise. It is found that X-ray selected blazars have the same average X-ray luminosity as blazars selected otherwise and are underluminous at UV and radio frequencies. This finding is used to argue that the radio-weak, X-ray selected BL Lac objects are, in terms of space density, the dominant members of the blazar population. The results are interpreted in the framework of synchrotron emission models involving relativistic plasma jets. 134 references

Spectral properties of blazars. I. Objects observed in the far-ultraviolet. II. An X-ray observed sample

Energy Technology Data Exchange (ETDEWEB)

Ghisellini, G.; Maraschi, L.; Treves, A.; Tanzi, E. G.

1986-11-01

All blazars observed with the IUE are studied and shown to form a well-defined subgroup according to their spectral properties. These properties are discussed with respect to theoretical models and are compared with those of quasars. Radio, ultraviolet, and X-ray fluxes are used to construct composite spectral indices, and systematic differences between X-ray selected and otherwise selected objects are discussed. It is confirmed that X-ray selected objects have flatter overall spectra, and are therefore weaker radio emitters relative to their X-ray emission than objects selected otherwise. It is found that X-ray selected blazars have the same average X-ray luminosity as blazars selected otherwise and are underluminous at UV and radio frequencies. This finding is used to argue that the radio-weak, X-ray selected BL Lac objects are, in terms of space density, the dominant members of the blazar population. The results are interpreted in the framework of synchrotron emission models involving relativistic plasma jets. 134 references.

Objects of consciousness

Directory of Open Access Journals (Sweden)

Donald David Hoffman

2014-06-01

Full Text Available Current models of visual perception typically assume that human vision estimates true properties of physical objects, properties that exist even if unperceived. However, recent studies of perceptual evolution, using evolutionary games and genetic algorithms, reveal that natural selection often drives true perceptions to extinction when they compete with perceptions tuned to fitness rather than truth: Perception guides adaptive behavior; it does not estimate a preexisting physical truth. Moreover, shifting from evolutionary biology to quantum physics, there is reason to disbelieve in preexist-ing physical truths: Certain interpretations of quantum theory deny that dynamical properties of physical objects have defi-nite values when unobserved. In some of these interpretations the observer is fundamental, and wave functions are com-pendia of subjective probabilities, not preexisting elements of physical reality. These two considerations, from evolutionary biology and quantum physics, suggest that current models of object perception require fundamental reformulation. Here we begin such a reformulation, starting with a formal model of consciousness that we call a conscious agent. We develop the dynamics of interacting conscious agents, and study how the perception of objects and space-time can emerge from such dynamics. We show that one particular object, the quantum free particle, has a wave function that is identical in form to the harmonic functions that characterize the asymptotic dynamics of conscious agents; particles are vibrations not of strings but of interacting conscious agents. This allows us to reinterpret physical properties such as position, momentum, and energy as properties of interacting conscious agents, rather than as preexisting physical truths. We sketch how this approach might extend to the perception of relativistic quantum objects, and to classical objects of macroscopic scale.

Deposit growth and property development in coal-fired furnaces

Energy Technology Data Exchange (ETDEWEB)

Baxter, L. [Sandia National Lab., Livermore, CA (United States)

1995-11-01

The objectives of this research project are: (1) to provide a self-consistent database of simultaneously measured, time-resolved ash deposit properties in well-controlled and well-defined environments and (2) to provide analytical expressions that relate deposit composition and structure to deposit properties of immediate relevance to PETC`s Combustion 2000 program. This project is distinguished from related work being done elsewhere by: (1) the development and deployment of in-situ diagnostics to monitor deposit properties, including heat transfer coefficients, porosity, emissivity, tenacity, strength, density, and viscosity; (2) the time resolution of such properties during deposit growth; (3) simultaneous measurement of structural and composition properties; (4) development of algorithms from a self-consistent, simultaneously measured database that includes the interdependence of properties; and (5) application of the results to technologically relevant environments such as those being planned under Combustion 2000 program. Work completed during FY94 emphasized diagnostic development. During FY95, this development work will be completed and we will emphasize application of the diagnostics to meet the other project objectives. Included in this work are the development and application of two in-situ, real-time diagnostic systems for monitoring the properties of inorganic materials on Heat transfer surfaces and in the gas-phase during controlled combustion of selected coal samples in Sandia`s Multifuel Combustor (MFC). Also, several diagnostics are being incorporated into the MFC that will eventually be used to characterize ash deposit properties.

Identification of physical properties for the retrieval data quality objective process

International Nuclear Information System (INIS)

Gates, C.M.; Beckette, M.R.

1995-06-01

This activity supports the retrieval data quality objective (DQO) process by identifying the material properties that are important to the design, development, and operation of retrieval equipment; the activity also provides justification for characterizing those properties. These properties, which control tank waste behavior during retrieval operations, are also critical to the development of valid physical simulants for designing retrieval equipment. The waste is to be retrieved in a series of four steps. First, a selected retrieval technology breaks up or dislodges the waste into subsequently smaller pieces. Then, the dislodged waste is conveyed out of the tank through the conveyance line. Next, the waste flows into a separator unit that separates the gaseous phase from the liquid and solid phases. Finally, a unit may be present to condition the slurried waste before transporting it to the treatment facility. This document describes the characterization needs for the proposed processes to accomplish waste retrieval. Baseline mobilization technologies include mixer pump technology, sluicing, and high-pressure water-jet cutting. Other processes that are discussed in this document include slurry formation, pneumatic conveyance, and slurry transport. Section 2.0 gives a background of the DQO process and the different retrieval technologies. Section 3.0 provides the mechanistic descriptions and material properties critical to the different technologies and processes. Supplemental information on specific technologies and processes is provided in the appendices. Appendix A contains a preliminary sluicing model, and Appendices B and C cover pneumatic transport and slurry transport, respectively, as prepared for this document. Appendix D contains sample calculations for various equations

Molecular simulation of the thermophysical properties and phase behaviour of impure CO2 relevant to CCS.

Science.gov (United States)

Cresswell, Alexander J; Wheatley, Richard J; Wilkinson, Richard D; Graham, Richard S

2016-10-20

Impurities from the CCS chain can greatly influence the physical properties of CO 2 . This has important design, safety and cost implications for the compression, transport and storage of CO 2 . There is an urgent need to understand and predict the properties of impure CO 2 to assist with CCS implementation. However, CCS presents demanding modelling requirements. A suitable model must both accurately and robustly predict CO 2 phase behaviour over a wide range of temperatures and pressures, and maintain that predictive power for CO 2 mixtures with numerous, mutually interacting chemical species. A promising technique to address this task is molecular simulation. It offers a molecular approach, with foundations in firmly established physical principles, along with the potential to predict the wide range of physical properties required for CCS. The quality of predictions from molecular simulation depends on accurate force-fields to describe the interactions between CO 2 and other molecules. Unfortunately, there is currently no universally applicable method to obtain force-fields suitable for molecular simulation. In this paper we present two methods of obtaining force-fields: the first being semi-empirical and the second using ab initio quantum-chemical calculations. In the first approach we optimise the impurity force-field against measurements of the phase and pressure-volume behaviour of CO 2 binary mixtures with N 2 , O 2 , Ar and H 2 . A gradient-free optimiser allows us to use the simulation itself as the underlying model. This leads to accurate and robust predictions under conditions relevant to CCS. In the second approach we use quantum-chemical calculations to produce ab initio evaluations of the interactions between CO 2 and relevant impurities, taking N 2 as an exemplar. We use a modest number of these calculations to train a machine-learning algorithm, known as a Gaussian process, to describe these data. The resulting model is then able to accurately

Social Categories are Natural Kinds, not Objective Types (and Why it Matters Politically

Directory of Open Access Journals (Sweden)

Bach Theodore

2016-08-01

Full Text Available There is growing support for the view that social categories like men and women refer to “objective types.” An objective type is a similarity class for which the axis of similarity is an objective rather than nominal or fictional property. Such types are independently real and causally relevant, yet their unity does not derive from an essential property. Given this tandem of features, it is not surprising why empirically-minded researchers interested in fighting oppression and marginalization have found this ontological category so attractive: objective types have the ontological credentials to secure the reality (and thus political representation of social categories, and yet they do not impose exclusionary essences that also naturalize and legitimize social inequalities. This essay argues that, from the perspective of these political goals of fighting oppression and marginalization, the category of objective types is in fact a Trojan horse; it looks like a gift, but it ends up creating trouble. I argue that objective type classifications often lack empirical adequacy, and as a result they lack political adequacy. I also provide, and in reference to the normative goals described above, several arguments for preferring a social ontology of natural kinds with historical essences.

Time-dependent inhomogeneous jet models for BL Lac objects

Science.gov (United States)

Marlowe, A. T.; Urry, C. M.; George, I. M.

1992-05-01

Relativistic beaming can explain many of the observed properties of BL Lac objects (e.g., rapid variability, high polarization, etc.). In particular, the broadband radio through X-ray spectra are well modeled by synchrotron-self Compton emission from an inhomogeneous relativistic jet. We have done a uniform analysis on several BL Lac objects using a simple but plausible inhomogeneous jet model. For all objects, we found that the assumed power-law distribution of the magnetic field and the electron density can be adjusted to match the observed BL Lac spectrum. While such models are typically unconstrained, consideration of spectral variability strongly restricts the allowed parameters, although to date the sampling has generally been too sparse to constrain the current models effectively. We investigate the time evolution of the inhomogeneous jet model for a simple perturbation propagating along the jet. The implications of this time evolution model and its relevance to observed data are discussed.

Cortical processing of object affordances for self and others’ action

Directory of Open Access Journals (Sweden)

Monica eMaranesi

2014-06-01

Full Text Available The perception of objects does not rely only on visual brain areas, but also involves cortical motor regions. In particular, different parietal and premotor areas host neurons discharging during both object observation and grasping. Most of these cells often show similar visual and motor selectivity for a specific object (or set of objects, suggesting that they might play a crucial role in representing the potential motor act afforded by the object. The existence of such a mechanism for the visuomotor transformation of object physical properties in the most appropriate motor plan for interacting with them has been convincingly demonstrated in humans as well. Interestingly, human studies have shown that visually presented objects can automatically trigger the representation of an action provided that they are located within the observer’s reaching space (peripersonal space. The affordance effect also occurs when the presented object is outside the observer’s peripersonal space, but inside the peripersonal space of an observed agent. These findings recently received direct support by single neuron studies in monkey, indicating that space-constrained processing of objects in the ventral premotor cortex might be relevant to represent objects as potential targets for one’s own or others' action.

BL Lacertae objects

International Nuclear Information System (INIS)

Disney, M.J.; Veron, P.

1977-01-01

The properties of BL Lacertae objects are discussed including their spectra, variability, and brightness. The historical development of observation, and the conclusion that these objects are possibly quasar-related objects rather than variable stars as originally supposed are treated. The possible mechanisms for the unusual luminosity of these objects are considered

Introduction to Virtual Property: Lex Virtualis Ipsa Loquitur

Directory of Open Access Journals (Sweden)

Wian Erlank

2015-12-01

Full Text Available This article serves as an introduction to the concept of virtual property and also to very briefly note the relevance of virtual property in modern society. A universally accepted definition of virtual property is hard to come by, but the paper will aim to provide some clarity on the issue. Virtual property is still property, and it still exists even though it is intangible. It includes (amongst other things website addresses and email addresses as well as certain other accepted immaterial property objects such as bank accounts, stocks, options and derivatives. Indeed, one can go so far as to include digital goods, such as digital versions of books (e-books, computer or smartphone programmes or apps, television series and movies as well as digital music (albums and tracks as objects of virtual property. However, the focus in this paper is on the type of virtual property found inside virtual worlds. The discussion of virtual property will be facilitated by reference to some of the ancillary and more complicated areas of the field to serve as a point of reference leading to an understanding of the concept of virtual property in general.

Tactile object exploration using cursor navigation sensors

DEFF Research Database (Denmark)

Kraft, Dirk; Bierbaum, Alexander; Kjaergaard, Morten

2009-01-01

In robotic applications tactile sensor systems serve the purpose of localizing a contact point and measuring contact forces. We have investigated the applicability of a sensorial device commonly used in cursor navigation technology for tactile sensing in robotics. We show the potential of this se......In robotic applications tactile sensor systems serve the purpose of localizing a contact point and measuring contact forces. We have investigated the applicability of a sensorial device commonly used in cursor navigation technology for tactile sensing in robotics. We show the potential...... of this sensor for active haptic exploration. More specifically, we present experiments and results which demonstrate the extraction of relevant object properties such as local shape, weight and elasticity using this technology. Besides its low price due to mass production and its modularity, an interesting...... aspect of this sensor is that beside a localization of contact points and measurement of the contact normal force also shear forces can be measured. This is relevant for many applications such as surface normal estimation and weight measurements. Scalable tactile sensor arrays have been developed...

Objective measures of emotion related to brand attitude: a new way to quantify emotion-related aspects relevant to marketing.

Science.gov (United States)

Walla, Peter; Brenner, Gerhard; Koller, Monika

2011-01-01

With this study we wanted to test the hypothesis that individual like and dislike as occurring in relation to brand attitude can be objectively assessed. First, individuals rated common brands with respect to subjective preference. Then, they volunteered in an experiment during which their most liked and disliked brand names were visually presented while three different objective measures were taken. Participant's eye blinks as responses to acoustic startle probes were registered with electromyography (EMG) (i) and their skin conductance (ii) and their heart rate (iii) were recorded. We found significantly reduced eye blink amplitudes related to liked brand names compared to disliked brand names. This finding suggests that visual perception of liked brand names elicits higher degrees of pleasantness, more positive emotion and approach-oriented motivation than visual perception of disliked brand names. Also, skin conductance and heart rate were both reduced in case of liked versus disliked brand names. We conclude that all our physiological measures highlight emotion-related differences depending on the like and dislike toward individual brands. We suggest that objective measures should be used more frequently to quantify emotion-related aspects of brand attitude. In particular, there might be potential interest to introduce startle reflex modulation to measure emotion-related impact during product development, product design and various further fields relevant to marketing. Our findings are discussed in relation to the idea that self reported measures are most often cognitively polluted.

Objective Measures of Emotion Related to Brand Attitude: A New Way to Quantify Emotion-Related Aspects Relevant to Marketing

Science.gov (United States)

Walla, Peter; Brenner, Gerhard; Koller, Monika

2011-01-01

With this study we wanted to test the hypothesis that individual like and dislike as occurring in relation to brand attitude can be objectively assessed. First, individuals rated common brands with respect to subjective preference. Then, they volunteered in an experiment during which their most liked and disliked brand names were visually presented while three different objective measures were taken. Participant's eye blinks as responses to acoustic startle probes were registered with electromyography (EMG) (i) and their skin conductance (ii) and their heart rate (iii) were recorded. We found significantly reduced eye blink amplitudes related to liked brand names compared to disliked brand names. This finding suggests that visual perception of liked brand names elicits higher degrees of pleasantness, more positive emotion and approach-oriented motivation than visual perception of disliked brand names. Also, skin conductance and heart rate were both reduced in case of liked versus disliked brand names. We conclude that all our physiological measures highlight emotion-related differences depending on the like and dislike toward individual brands. We suggest that objective measures should be used more frequently to quantify emotion-related aspects of brand attitude. In particular, there might be potential interest to introduce startle reflex modulation to measure emotion-related impact during product development, product design and various further fields relevant to marketing. Our findings are discussed in relation to the idea that self reported measures are most often cognitively polluted. PMID:22073192

Objective measures of emotion related to brand attitude: a new way to quantify emotion-related aspects relevant to marketing.

Directory of Open Access Journals (Sweden)

Peter Walla

Full Text Available With this study we wanted to test the hypothesis that individual like and dislike as occurring in relation to brand attitude can be objectively assessed. First, individuals rated common brands with respect to subjective preference. Then, they volunteered in an experiment during which their most liked and disliked brand names were visually presented while three different objective measures were taken. Participant's eye blinks as responses to acoustic startle probes were registered with electromyography (EMG (i and their skin conductance (ii and their heart rate (iii were recorded. We found significantly reduced eye blink amplitudes related to liked brand names compared to disliked brand names. This finding suggests that visual perception of liked brand names elicits higher degrees of pleasantness, more positive emotion and approach-oriented motivation than visual perception of disliked brand names. Also, skin conductance and heart rate were both reduced in case of liked versus disliked brand names. We conclude that all our physiological measures highlight emotion-related differences depending on the like and dislike toward individual brands. We suggest that objective measures should be used more frequently to quantify emotion-related aspects of brand attitude. In particular, there might be potential interest to introduce startle reflex modulation to measure emotion-related impact during product development, product design and various further fields relevant to marketing. Our findings are discussed in relation to the idea that self reported measures are most often cognitively polluted.

Subjective relevance of objective measures for spatial impression (A)

DEFF Research Database (Denmark)

Wang, Lily M.; Gade, Anders Christian

2000-01-01

Several objective measures have been proposed to describe the feeling of spatial impression in concert halls, including Lateral Energy Fraction (LF) and Interaural Cross-Correlation Coefficient (IACC). However, previous studies have shown that LF and IACC values did not highly correlate with each...... other at individual seat positions in real halls [J. S. Bradley, J. Acoust. Soc. Am. 96, 3525–3535 (1994)]. To investigate the listener envelopment aspect of spatial impression further, subjective paired-comparison tests have been run using signals which have various values for LF, early IACC (from 5...

Characterization of Jatropha curcas L. Protein Cast Films with respect to Packaging Relevant Properties

Directory of Open Access Journals (Sweden)

Gabriele Gofferje

2015-01-01

Full Text Available There is increasing research ongoing towards the substitution of petrochemical based plastics by more sustainable raw materials, especially in the field of bioplastics. Proteins of different types such as whey, casein, gelatine, or zein show potential beyond the food and feed industry as, for instance, the application in packaging. Protein based coatings provide different packaging relevant properties such as barrier against permanent gases, certain water vapour barrier, and mechanical resistance. The aim of this study was to explore the potential for packaging applications of proteins from Jatropha curcas L. and to compare the performance with literature data on cast films from whey protein isolate. As a by-product from oil extraction, high amounts of Jatropha meal are obtained requiring a concept for its sustainable utilization. Jatropha seed cake includes up to 40% (w/w of protein which is currently not utilized. The present study provides new data on the potential of Jatropha protein for packaging applications. It was shown that Jatropha protein cast films show suitable barrier and mechanical properties depending on the extraction and purification method as well as on the plasticiser content. Based on these findings Jatropha proteins own potential to be utilized as coating material for food packaging applications.

Predicting biological system objectives de novo from internal state measurements

Directory of Open Access Journals (Sweden)

Maranas Costas D

2008-01-01

Full Text Available Abstract Background Optimization theory has been applied to complex biological systems to interrogate network properties and develop and refine metabolic engineering strategies. For example, methods are emerging to engineer cells to optimally produce byproducts of commercial value, such as bioethanol, as well as molecular compounds for disease therapy. Flux balance analysis (FBA is an optimization framework that aids in this interrogation by generating predictions of optimal flux distributions in cellular networks. Critical features of FBA are the definition of a biologically relevant objective function (e.g., maximizing the rate of synthesis of biomass, a unit of measurement of cellular growth and the subsequent application of linear programming (LP to identify fluxes through a reaction network. Despite the success of FBA, a central remaining challenge is the definition of a network objective with biological meaning. Results We present a novel method called Biological Objective Solution Search (BOSS for the inference of an objective function of a biological system from its underlying network stoichiometry as well as experimentally-measured state variables. Specifically, BOSS identifies a system objective by defining a putative stoichiometric "objective reaction," adding this reaction to the existing set of stoichiometric constraints arising from known interactions within a network, and maximizing the putative objective reaction via LP, all the while minimizing the difference between the resultant in silico flux distribution and available experimental (e.g., isotopomer flux data. This new approach allows for discovery of objectives with previously unknown stoichiometry, thus extending the biological relevance from earlier methods. We verify our approach on the well-characterized central metabolic network of Saccharomyces cerevisiae. Conclusion We illustrate how BOSS offers insight into the functional organization of biochemical networks

Non-destructive investigations of Swiss museums objects with neutron and x-ray imaging methods

International Nuclear Information System (INIS)

Lehmann, E.H.; Deschler, E.; Pernet, L.; Vontobel, P.

2004-01-01

Many objects of archaeological relevance found in Switzerland are from the Celtic and Roman era. Because of their uniqueness in most cases it is demanded to perform any investigation with such samples non-destructively. Depending on the structure and size of the objects a transmission experiment performed either with X-ray or neutron can alight inner structures, composition, defects or the principles of the manufacturing procedures. Furthermore, the treatment by conservators and restaurateurs becomes visible in many cases. This report describes some examples of such investigations. In the case of neutron investigations, beside the transmission imaging as a radiograph the three-dimensional structure was observed with a tomography technique. For X-ray radiography, the images were obtained in the same digital format because the similar experimental method (imaging plates) was applied. It becomes evident in the described examples that the combination and complementary use of both methods (neutrons and X-ray) brings insights in different aspects of the samples properties and treatment. This approach to study museums objects stored and exhibit in Switzerland can be extrapolated to other countries where these techniques are also simultaneously available in order to investigate other objects of relevance. The European network COST-G8 entitled 'Non-destructive analysis and testing of museum objects' can help to support initiatives in this direction. (author)

41 CFR 128-1.8003 - Objective.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Objective. 128-1.8003 Section 128-1.8003 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8003 Objective. The...

Effects of Objective and Subjective Competence on the Reliability of Crowdsourced Relevance Judgments

Science.gov (United States)

Samimi, Parnia; Ravana, Sri Devi; Webber, William; Koh, Yun Sing

2017-01-01

Introduction: Despite the popularity of crowdsourcing, the reliability of crowdsourced output has been questioned since crowdsourced workers display varied degrees of attention, ability and accuracy. It is important, therefore, to understand the factors that affect the reliability of crowdsourcing. In the context of producing relevance judgments,…

Statistical properties of randomly broken objects and of multivalley structures in disordered systems

International Nuclear Information System (INIS)

Derrida, B.; Flyvbjerg, H.

1987-02-01

The statistical properties of the multivalley structure of disordered systems and of randomly broken objects have lots of features in common. For all these problems, if W s denotes the weight of the s th piece, we show that the probability distributions P 1 (W 1 ) of the largest piece W 1 , P 2 (W 2 ) of the second largest piece, and Π(Y) of Y = Σ s W s 2 have always singularities at W 1 = 1/n, W 2 = 1/n and Y = 1/n, n = 1, 2, 3,... (orig.)

Binding Objects to Locations: The Relationship between Object Files and Visual Working Memory

Science.gov (United States)

Hollingworth, Andrew; Rasmussen, Ian P.

2010-01-01

The relationship between object files and visual working memory (VWM) was investigated in a new paradigm combining features of traditional VWM experiments (color change detection) and object-file experiments (memory for the properties of moving objects). Object-file theory was found to account for a key component of object-position binding in VWM:…

Temporal brain dynamics of multiple object processing: the flexibility of individuation.

Directory of Open Access Journals (Sweden)

Veronica Mazza

Full Text Available The ability to process concurrently multiple visual objects is fundamental for a coherent perception of the world. A core component of this ability is the simultaneous individuation of multiple objects. Many studies have addressed the mechanism of object individuation but it remains unknown whether the visual system mandatorily individuates all relevant elements in the visual field, or whether object indexing depends on task demands. We used a neural measure of visual selection, the N2pc component, to evaluate the flexibility of multiple object individuation. In three ERP experiments, participants saw a variable number of target elements among homogenous distracters and performed either an enumeration task (Experiment 1 or a detection task, reporting whether at least one (Experiment 2 or a specified number of target elements (Experiment 3 was present. While in the enumeration task the N2pc response increased as a function of the number of targets, no such modulation was found in Experiment 2, indicating that individuation of multiple targets is not mandatory. However, a modulation of the N2pc similar to the enumeration task was visible in Experiment 3, further highlighting that object individuation is a flexible mechanism that binds indexes to object properties and locations as needed for further object processing.

A review of virtual cutting methods and technology in deformable objects.

Science.gov (United States)

Wang, Monan; Ma, Yuzheng

2018-06-05

Virtual cutting of deformable objects has been a research topic for more than a decade and has been used in many areas, especially in surgery simulation. We refer to the relevant literature and briefly describe the related research. The virtual cutting method is introduced, and we discuss the benefits and limitations of these methods and explore possible research directions. Virtual cutting is a category of object deformation. It needs to represent the deformation of models in real time as accurately, robustly and efficiently as possible. To accurately represent models, the method must be able to: (1) model objects with different material properties; (2) handle collision detection and collision response; and (3) update the geometry and topology of the deformable model that is caused by cutting. Virtual cutting is widely used in surgery simulation, and research of the cutting method is important to the development of surgery simulation. Copyright © 2018 John Wiley & Sons, Ltd.

Probing polymer crystallization at processing-relevant cooling rates with synchrotron radiation

Energy Technology Data Exchange (ETDEWEB)

Cavallo, Dario, E-mail: Dario.cavallo@unige.it [University of Genoa, Dept. of Chemistry and Industrial Chemistry, Via Dodecaneso 31, 16146 Genoa (Italy); Portale, Giuseppe [ESRF, Dubble CRG, Netherlands Organization of Scientific Research (NWO), 38043 Grenoble (France); Androsch, René [Martin-Luther-University Halle-Wittenberg, Center of Engineering Sciences, D-06099 Halle/S. (Germany)

2015-12-17

Processing of polymeric materials to produce any kind of goods, from films to complex objects, involves application of flow fields on the polymer melt, accompanied or followed by its rapid cooling. Typically, polymers solidify at cooling rates which span over a wide range, from a few to hundreds of °C/s. A novel method to probe polymer crystallization at processing-relevant cooling rates is proposed. Using a custom-built quenching device, thin polymer films are ballistically cooled from the melt at rates between approximately 10 and 200 °C/s. Thanks to highly brilliant synchrotron radiation and to state-of-the-art X-ray detectors, the crystallization process is followed in real-time, recording about 20 wide angle X-ray diffraction patterns per second while monitoring the instantaneous sample temperature. The method is applied to a series of industrially relevant polymers, such as isotactic polypropylene, its copolymers and virgin and nucleated polyamide-6. Their crystallization behaviour during rapid cooling is discussed, with particular attention to the occurrence of polymorphism, which deeply impact material’s properties.

Inactivation of the antibacterial and cytotoxic properties of silver ions by biologically relevant compounds.

Directory of Open Access Journals (Sweden)

Geraldine Mulley

Full Text Available There has been a recent surge in the use of silver as an antimicrobial agent in a wide range of domestic and clinical products, intended to prevent or treat bacterial infections and reduce bacterial colonization of surfaces. It has been reported that the antibacterial and cytotoxic properties of silver are affected by the assay conditions, particularly the type of growth media used in vitro. The toxicity of Ag+ to bacterial cells is comparable to that of human cells. We demonstrate that biologically relevant compounds such as glutathione, cysteine and human blood components significantly reduce the toxicity of silver ions to clinically relevant pathogenic bacteria and primary human dermal fibroblasts (skin cells. Bacteria are able to grow normally in the presence of silver nitrate at >20-fold the minimum inhibitory concentration (MIC if Ag+ and thiols are added in a 1:1 ratio because the reaction of Ag+ with extracellular thiols prevents silver ions from interacting with cells. Extracellular thiols and human serum also significantly reduce the antimicrobial activity of silver wound dressings Aquacel-Ag (Convatec and Acticoat (Smith & Nephew to Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli in vitro. These results have important implications for the deployment of silver as an antimicrobial agent in environments exposed to biological tissue or secretions. Significant amounts of money and effort have been directed at the development of silver-coated medical devices (e.g. dressings, catheters, implants. We believe our findings are essential for the effective design and testing of antimicrobial silver coatings.

Semantic and functional relationships among objects increase the capacity of visual working memory.

Science.gov (United States)

O'Donnell, Ryan E; Clement, Andrew; Brockmole, James R

2018-04-12

Visual working memory (VWM) has a limited capacity of approximately 3-4 visual objects. Current theories of VWM propose that a limited pool of resources can be flexibly allocated to objects, allowing them to be represented at varying levels of precision. Factors that influence the allocation of these resources, such as the complexity and perceptual grouping of objects, can thus affect the capacity of VWM. We sought to identify whether semantic and functional relationships between objects could influence the grouping of objects, thereby increasing the functional capacity of VWM. Observers viewed arrays of 8 to-be-remembered objects arranged into 4 pairs. We manipulated both the semantic association and functional interaction between the objects, then probed participants' memory for the arrays. When objects were semantically related, participants' memory for the arrays improved. Participants' memory further improved when semantically related objects were positioned to interact with each other. However, when we increased the spacing between the objects in each pair, the benefits of functional but not semantic relatedness were eliminated. These findings suggest that action-relevant properties of objects can increase the functional capacity of VWM, but only when objects are positioned to directly interact with each other. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

A preclinical Talbot-Lau prototype for x-ray dark-field imaging of human-sized objects.

Science.gov (United States)

Hauke, C; Bartl, P; Leghissa, M; Ritschl, L; Sutter, S M; Weber, T; Zeidler, J; Freudenberger, J; Mertelmeier, T; Radicke, M; Michel, T; Anton, G; Meinel, F G; Baehr, A; Auweter, S; Bondesson, D; Gaass, T; Dinkel, J; Reiser, M; Hellbach, K

2018-03-26

Talbot-Lau x-ray interferometry provides information about the scattering and refractive properties of an object - in addition to the object's attenuation features. Until recently, this method was ineligible for imaging human-sized objects as it is challenging to adapt Talbot-Lau interferometers (TLIs) to the relevant x-ray energy ranges. In this work, we present a preclinical Talbot-Lau prototype capable of imaging human-sized objects with proper image quality at clinically acceptable dose levels. The TLI is designed to match a setup of clinical relevance as closely as possible. The system provides a scan range of 120 × 30 cm 2 by using a scanning beam geometry. Its ultimate load is 100 kg. High aspect ratios and fine grid periods of the gratings ensure a reasonable setup length and clinically relevant image quality. The system is installed in a university hospital and is, therefore, exposed to the external influences of a clinical environment. To demonstrate the system's capabilities, a full-body scan of a euthanized pig was performed. In addition, freshly excised porcine lungs with an extrinsically provoked pneumothorax were mounted into a human thorax phantom and examined with the prototype. Both examination sequences resulted in clinically relevant image quality - even in the case of a skin entrance air kerma of only 0.3 mGy which is in the range of human thoracic imaging. The presented case of a pneumothorax and a reader study showed that the prototype's dark-field images provide added value for pulmonary diagnosis. We demonstrated that a dedicated design of a Talbot-Lau interferometer can be applied to medical imaging by constructing a preclinical Talbot-Lau prototype. We experienced that the system is feasible for imaging human-sized objects and the phase-stepping approach is suitable for clinical practice. Hence, we conclude that Talbot-Lau x-ray imaging has potential for clinical use and enhances the diagnostic power of medical x-ray imaging. �

Ape metaphysics: object individuation without language.

Science.gov (United States)

Mendes, Natacha; Rakoczy, Hannes; Call, Josep

2008-02-01

Developmental research suggests that whereas very young infants individuate objects purely on spatiotemporal grounds, from (at latest) around 1 year of age children are capable of individuating objects according to the kind they belong to and the properties they instantiate. As the latter ability has been found to correlate with language, some have speculated whether it might be essentially language dependent and therefore uniquely human. Existing studies with non-human primates seem to speak against this hypothesis, but fail to present conclusive evidence due to methodological shortcomings. In the present experiments we set out to test non-linguistic object individuation in three great ape species with a refined manual search methodology. Experiment 1 tested for spatiotemporal object individuation: Subjects saw 1 or 2 objects simultaneously being placed inside a box in which they could reach, and then in both conditions only found 1 object. After retrieval of the 1 object, subjects reached again significantly more often when they had seen 2 than when they had seen 1 object. Experiment 2 tested for object individuation according to property/kind information only: Subjects saw 1 object being placed inside the box, and then either found that object (expected) or an object of a different kind (unexpected). Analogously to Experiment 1, after retrieval of the 1 object, subjects reached again significantly more often in the unexpected than in the expected condition. These results thus confirm previous findings suggesting that individuating objects according to their property/kind is neither uniquely human nor essentially language dependent. It remains to be seen, however, whether this kind of object individuation requires sortal concepts as human linguistic thinkers use them, or whether some simpler form of tracking properties is sufficient.

Decline in word-finding: The objective cognitive finding most relevant to patients after mesial temporal lobe epilepsy surgery.

Science.gov (United States)

Pauli, Carla; de Oliveira Thais, Maria Emilia Rodrigues; Guarnieri, Ricardo; Schwarzbold, Marcelo Liborio; Diaz, Alexandre Paim; Ben, Juliana; Linhares, Marcelo Neves; Markowitsch, Hans Joachim; Wolf, Peter; Wiebe, Samuel; Lin, Katia; Walz, Roger

2017-10-01

The purpose of this study was to investigate the following: i) the objective impairment in neuropsychological tests that were associated with the subjective perception of cognitive function decline in Brazilian patients who underwent mesial temporal lobe epilepsy (MTLE) surgery and ii) the predictive variables for those impaired objective neuropsychological tests. Forty-eight adults with MTLE (27 right HS and 23 male) were divided according to their perception of changes (Decline or No-decline) of cognitive function domain of the QOLIE-31 questionnaire applied before and 1year after the ATL. The mean (SD) of changes in the raw score difference of the neuropsychological tests before and after the ATL was compared between Decline and No-decline groups. Receiver Operating Characteristic curves, sensitivity, specificity, and predictive values were used to assess the optimum cutoff points of neuropsychological test score changes to predict patient-reported subjective cognitive decline. Six (12.5%) patients reported a perception of cognitive function decline after ATL. Among the 25 cognitive tests analyzed, only changes in the Boston Naming Test (BNT) were associated with subjective cognitive decline reported by patients. A reduction of ≥8 points in the raw score of BNT after surgery had 91% of sensitivity and 45% specificity for predicting subjective perception of cognitive function decline by the patient. Left side surgery and age older than 40years were more associated with an important BNT reduction with overall accuracy of 91.7%, 95% predictive ability for no impairment, and 75% for impairment of cognitive function. Impairment in word-finding seems to be the objective cognitive finding most relevant to Brazilian patients after mesial temporal lobe epilepsy surgery. Similar to American patients, the side of surgery and age are good predictors for no decline in the BNT, but shows a lower accuracy to predict its decline. If replicated in other populations, the

Breaking object correspondence across saccadic eye movements deteriorates object recognition

Directory of Open Access Journals (Sweden)

Christian H. Poth

2015-12-01

Full Text Available Visual perception is based on information processing during periods of eye fixations that are interrupted by fast saccadic eye movements. The ability to sample and relate information on task-relevant objects across fixations implies that correspondence between presaccadic and postsaccadic objects is established. Postsaccadic object information usually updates and overwrites information on the corresponding presaccadic object. The presaccadic object representation is then lost. In contrast, the presaccadic object is conserved when object correspondence is broken. This helps transsaccadic memory but it may impose attentional costs on object recognition. Therefore, we investigated how breaking object correspondence across the saccade affects postsaccadic object recognition. In Experiment 1, object correspondence was broken by a brief postsaccadic blank screen. Observers made a saccade to a peripheral object which was displaced during the saccade. This object reappeared either immediately after the saccade or after the blank screen. Within the postsaccadic object, a letter was briefly presented (terminated by a mask. Observers reported displacement direction and letter identity in different blocks. Breaking object correspondence by blanking improved displacement identification but deteriorated postsaccadic letter recognition. In Experiment 2, object correspondence was broken by changing the object’s contrast-polarity. There were no object displacements and observers only reported letter identity. Again, breaking object correspondence deteriorated postsaccadic letter recognition. These findings identify transsaccadic object correspondence as a key determinant of object recognition across the saccade. This is in line with the recent hypothesis that breaking object correspondence results in separate representations of presaccadic and postsaccadic objects which then compete for limited attentional processing resources (Schneider, 2013. Postsaccadic

Burst firing in a motion-sensitive neural pathway correlates with expansion properties of looming objects that evoke avoidance behaviours

Directory of Open Access Journals (Sweden)

Glyn Allan McMillan

2015-12-01

Full Text Available The locust visual system contains a well-defined motion-sensitive pathway that transfers visual input to motor centers involved in predator evasion and collision avoidance. One interneuron in this pathway, the descending contralateral movement detector (DCMD, is typically described as using rate coding; edge expansion of approaching objects causes an increased rate of neuronal firing that peaks after a certain retinal threshold angle is exceeded. However, evidence of intrinsic DCMD bursting properties combined with observable oscillations in mean firing rates and tight clustering of spikes in raw traces, suggest that bursting may be important for motion detection. Sensory neuron bursting provides important timing information about dynamic stimuli in many model systems, yet no studies have rigorously investigated if bursting occurs in the locust DCMD during object approach. We presented repetitions of 30 looming stimuli known to generate behavioural responses to each of 20 locusts in order to identify and quantify putative bursting activity in the DCMD. Overall, we found a bimodal distribution of inter-spike intervals (ISI with peaks of more frequent and shorter ISIs occurring from 1-8 ms and longer less frequent ISIs occurring from 40-50 ms. Subsequent analysis identified bursts and isolated single spikes from the responses. Bursting frequency increased in the latter phase of an approach and peaked at the time of collision, while isolated spiking was predominant during the beginning of stimulus approach. We also found that the majority of inter-burst intervals occurred at 40-50 ms (or 20-25 bursts/s. Bursting also occurred across varied stimulus parameters and suggests that burst timing may be a key component of looming detection. Our findings suggest that the DCMD uses two modes of coding to transmit information about looming stimuli and that these modes change dynamically with a changing stimulus at a behaviourally-relevant time.

Scientific relevance of Swiss property insurance data on flood risks and losses

Science.gov (United States)

Röthlisberger, Veronika; Bernet, Daniel; Keiler, Margreth

2015-04-01

The databases of Swiss flood insurance companies build a valuable but to date rarely used source of information for flood risk research. Detailed insights into the Swiss flood insurance system are crucial to evaluate the potential of the different databases for scientific analysis. Even though the flood insurance system modalities are mainly regulated on cantonal level there are some common principles that apply throughout Switzerland. First of all coverage against floods (and other particular natural hazards) is an integral part of every fire insurance policy for buildings or contents in Switzerland. This coupling of insurance as well as the statutory obligation to insure buildings in most of the cantons and movables in some of the cantons lead to a very high penetration. Second, in case of damage, the reinstatement costs (value as new) are compensated and third there are no (or little) deductible and co-pay. Thus the different datasets of the flood insurance companies would allow a very comprehensive data analysis. Moreover, insurance companies not only store electronically data about losses (typically date, amount of claims payment, cause of damage, identity of the insured object or policyholder) but also about insured objects. For insured objects the (insured) value and the details on the policy and its holder are the main feature to record. On buildings the insurance companies usually computerize additional information such as location, volume, year of construction or purpose of use. For the 19 (of total 26) cantons with a cantonal monopoly insurer the data of these insurance establishments have the additional value to represent (almost) the entire building stock of the respective canton. However, scientists face a wide range of the opportunities and challenges when using insurance data for flood research. The origin of flood insurance data implies that they are not generated for research but for business management. The presentation will highlighted pro and

Apparatus and method for the measurement of neutron moderating or absorbing properties of objects

International Nuclear Information System (INIS)

Untermyer, S.I.

1981-01-01

An apparatus and method for measuring the neutron moderating or absorbing properties of objects or materials is disclosed in which a fast neutron source cooperates with a neutron absorbing material which reduces the energy of the fast neutrons by inelastic scattering so that they can be readily thermalized by a moderator. A thermal neutron detector is disposed adjacent the material and serves to detect thermal neutrons emitted by a moderator placed to receive and thermalize the reduced energy neutrons. A material whose absorption is to be measured is placed between a moderator and the detector

Landscape architecture as an entity of property development in Wilayah Persekutuan, Putrajaya

Directory of Open Access Journals (Sweden)

Ahmad Nasyution bin Abdul Razak

2015-12-01

Full Text Available This study explores the relationship between landscape architecture and property development. Landscape architecture emphasizes the nature of conservation, development of public parks, city parks, local parks, artificial forests, lakes, recreational areas, outdoor recreation centers, open space systems and other components of landscape architecture in providing opportunities and benefits for real estate development. Backed by ample literature review, this study reveals the significant relationship between land, real estate and landscape architecture. Landscape architecture which provides an open park and green space can be expanded to benefit the social, environment and economy through optimal used of space in property development project. Hence, this study discusses the objectives which are to determine significant factors in the development of landscape architecture, to identify the importance of landscape architecture in real estate development, and to assess the relationship between landscape architecture and property development land. This study involved 50 respondents from renowned developers; Putrajaya Holdings Sdn Bhd (PJH, Selangor State Development Corporation (PKNS, the local authority; Putrajaya Corporation (PPJ, Kajang Municipal Council (MPKj, relevant agencies; Valuation and Property Services Department-JPPH (Ministry of Finance, Department of Town and Country Planning (Peninsular Malaysia, developers registered with ReHDA and residents / property owners in the study area. To conclude, this study offers adequate benefits to policy makers, also relevant agencies such as the local authorities, landowners, property developers, the relevant professionals and communities on the positive effects and significant relationships between landscape architecture and property development.

Elevator Sizing, Placement, and Control-Relevant Tradeoffs for Hypersonic Vehicles

Science.gov (United States)

Dickeson, Jeffrey J.; Rodriguez, Armando A.; Sridharan, Srikanth; Korad, Akshay

2010-01-01

Within this paper, control-relevant vehicle design concepts are examined using a widely used 3 DOF (plus flexibility) nonlinear model for the longitudinal dynamics of a generic carrot-shaped scramjet powered hypersonic vehicle. The impact of elevator size and placement on control-relevant static properties (e.g. level-flight trimmable region, trim controls, Angle of Attack (AOA), thrust margin) and dynamic properties (e.g. instability and right half plane zero associated with flight path angle) are examined. Elevator usage has been examine for a class of typical hypersonic trajectories.

Nuclear Energy General Objectives

International Nuclear Information System (INIS)

2011-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way it achieves this objective is to issue publications in various series. Two of these series are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III, paragraph A.6, of the IAEA Statute, the IAEA safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are primarily written in a regulatory style, and are binding on the IAEA for its own activities. The principal users are Member State regulatory bodies and other national authorities. The IAEA Nuclear Energy Series consists of reports designed to encourage and assist research on, and development and practical application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia and politicians, among others. The information is presented in guides, reports on the status of technology and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The series complements the IAEA's safety standards, and provides detailed guidance, experience, good practices and examples on the five areas covered in the IAEA Nuclear Energy Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be

Herbig-Haro objects

International Nuclear Information System (INIS)

Schwartz, R.D.

1983-01-01

Progress in the understanding of Herbig-Haro (HH) objects is reviewed. The results of optical studies of the proper motions and alignments, variability, and polarization of HH objects and the results of spectroscopic studies are discussed. Ground-based infrared studies and far-infrared observations are reviewed. Findings on the properties of molecular clouds associated with HH objects, on gas flows associated with HH IR stars, on maser emission, and on radio continuum observations are considered. A history of proposed excitation mechanisms for HH objects is briefly presented, and the salient shock-wave calculations aimed at synthesizing the spectra of HH objects are summarized along with hypotheses that have been advanced about the origin of the objects. 141 references

The Formation of Primordial Luminous Objects

International Nuclear Information System (INIS)

Ripamonti, Emanuele; Kapteyn Astron. Inst., Groningen; Abel, Tom; KIPAC, Menlo Park

2005-01-01

leave the discussion of feedback to lecture notes by Ferrara and Salvaterra and by Madau and Haardt in this same book and focus only on the aspects of the formation of the first objects. The advent of cosmological numerical hydrodynamics in particular allow a fresh new look at these questions. Hence, these notes will touch on aspects of theoretical cosmology to chemistry, computer science, hydrodynamics and atomic physics. For further reading and more references on the subject we refer the reader to other relevant reviews such as Barkana and Loeb 2001, and more recently Ciardi and Ferrara 2004, Glover 2004 and Bromm and Larson 2004. In these notes, we try to give a brief introduction to only the most relevant aspects. We will start with a brief overview of the relevant cosmological concepts in section 2, followed by a discussion of the properties of primordial material (with particular emphasis to its cooling and its chemistry) in section 3. We will then review the technique and the results of numerical simulations in sections 4 and 5: the former will deal with detailed 3D simulations of the formation of gaseous clouds which are likely to transform into luminous objects, while the latter will examine results (mostly from 1D codes) about the modalities of such transformation. Finally, in section 6 we will critically discuss the results of the previous sections, examining their consequences and comparing them to our present knowledge of the universe

The Application of Intentional Subjective Properties and Mediated Communication Tools to Software Agents in Online Disputes Resolution Environments

Directory of Open Access Journals (Sweden)

Renzo Gobbin

2004-11-01

Full Text Available This paper examines the use of subjective properties in modeling an architecture for cooperative agents using Agent Communication Language (ACL that is used as a mediating tool for cooperative communication activities between and within software agents. The role that subjective and objective properties have in explaining and modeling agent internalization and externalization of ACL messages is investigated and related to Vygotsky’s developmental learning theories such as Mediated Activity Theory. A novel agent architecture ALMA (Agent Language Mediated Activity based on the integration of agents’ subjective and objective properties within an agent communication activity framework will be presented. The relevance of software agents subjective properties in modeling applications such as e-Law Online Dispute Resolution for e-business contractual arrangements using natural language subject/object relation in their communication patterns will be discussed.

Property transmission: an explanatory account of the role of similarity information in causal inference.

Science.gov (United States)

White, Peter A

2009-09-01

Many kinds of common and easily observed causal relations exhibit property transmission, which is a tendency for the causal object to impose its own properties on the effect object. It is proposed that property transmission becomes a general and readily available hypothesis used to make interpretations and judgments about causal questions under conditions of uncertainty, in which property transmission functions as a heuristic. The property transmission hypothesis explains why and when similarity information is used in causal inference. It can account for magical contagion beliefs, some cases of illusory correlation, the correspondence bias, overestimation of cross-situational consistency in behavior, nonregressive tendencies in prediction, the belief that acts of will are causes of behavior, and a range of other phenomena. People learn that property transmission is often moderated by other factors, but under conditions of uncertainty in which the operation of relevant other factors is unknown, it tends to exhibit a pervasive influence on thinking about causality. (c) 2009 APA, all rights reserved.

What Makes an Object Memorable?

KAUST Repository

Dubey, Rachit

2016-02-19

Recent studies on image memorability have shed light on what distinguishes the memorability of different images and the intrinsic and extrinsic properties that make those images memorable. However, a clear understanding of the memorability of specific objects inside an image remains elusive. In this paper, we provide the first attempt to answer the question: what exactly is remembered about an image? We augment both the images and object segmentations from the PASCAL-S dataset with ground truth memorability scores and shed light on the various factors and properties that make an object memorable (or forgettable) to humans. We analyze various visual factors that may influence object memorability (e.g. color, visual saliency, and object categories). We also study the correlation between object and image memorability and find that image memorability is greatly affected by the memorability of its most memorable object. Lastly, we explore the effectiveness of deep learning and other computational approaches in predicting object memorability in images. Our efforts offer a deeper understanding of memorability in general thereby opening up avenues for a wide variety of applications. © 2015 IEEE.

What Makes an Object Memorable?

KAUST Repository

Dubey, Rachit; Peterson, Joshua; Khosla, Aditya; Yang, Ming-Hsuan; Ghanem, Bernard

2016-01-01

Recent studies on image memorability have shed light on what distinguishes the memorability of different images and the intrinsic and extrinsic properties that make those images memorable. However, a clear understanding of the memorability of specific objects inside an image remains elusive. In this paper, we provide the first attempt to answer the question: what exactly is remembered about an image? We augment both the images and object segmentations from the PASCAL-S dataset with ground truth memorability scores and shed light on the various factors and properties that make an object memorable (or forgettable) to humans. We analyze various visual factors that may influence object memorability (e.g. color, visual saliency, and object categories). We also study the correlation between object and image memorability and find that image memorability is greatly affected by the memorability of its most memorable object. Lastly, we explore the effectiveness of deep learning and other computational approaches in predicting object memorability in images. Our efforts offer a deeper understanding of memorability in general thereby opening up avenues for a wide variety of applications. © 2015 IEEE.

Identifying Relevant Studies in Software Engineering

DEFF Research Database (Denmark)

Zhang, He; Ali Babar, Muhammad; Tell, Paolo

2011-01-01

Context: Systematic literature review (SLR) has become an important research methodology in software engineering since the introduction of evidence-based software engineering (EBSE) in 2004. One critical step in applying this methodology is to design and execute appropriate and effective search....... Objective: The main objective of the research reported in this paper is to improve the search step of undertaking SLRs in software engineering (SE) by devising and evaluating systematic and practical approaches to identifying relevant studies in SE. Method: We have systematically selected and analytically...

National inventory of Global Change relevant research in Norway; Nasjonal kartlegging av global change-relevant forskning

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

The Norwegian Global Change Committee has made an inventory of global change research (GCR) projects funded by the Research Council of Norway (RCN) in 2001. In lack of a rigid definition, GCR was defined as research that can be considered relevant to the science agenda of the four major international global change programmes DIVERSITAS, IGBP, IHDP and WCRP. Relevance was judged based on the objectives stated for each of the international programmes and their core projects. It was not attempted to check whether the projects had any kind of link to the programmes they were considered relevant for. The grants provided by the RCN in 2001 to GCR as defined above amounts to about 77 mill. NOK. Based on a recent survey on climate change research it is reasonable to estimate that the RCN finances between 30 and 40 % of all GCR in Norway. Accordingly, the total value of Norwegian research relevant to the four international global change programmes in 2001 can be estimated to 192 - 254 mill. NOK.

[Requirements imposed on model objects in microevolutionary investigations].

Science.gov (United States)

Mina, M V

2015-01-01

Extrapolation of results of investigations of a model object is justified only within the limits of a set of objects that have essential properties in common with the modal object. Which properties are essential depends on the aim of a study. Similarity of objects emerged in the process of their independent evolution does not prove similarity of ways and mechanisms of their evolution. If the objects differ in their essential properties then extrapolation of results of investigation of an object on another one is risky because it may lead to wrong decisions and, moreover, to the loss of interest to alternative hypotheses. Positions formulated above are considered with the reference to species flocks of fishes, large African Barbus in particular.

Is ‘legal empowerment of the poor’ relevant to people with disabilities in developing countries? An empirical and normative review

Directory of Open Access Journals (Sweden)

Johan Borg

2013-11-01

Full Text Available Background: Legal empowerment of the poor is highly relevant to public health as it aims to relieve income poverty, a main determinant of health. The Commission on Legal Empowerment of the Poor (CLEP has proposed legal empowerment measures in the following four domains: access to justice and the rule of law, property, labor, and business rights. Despite being overrepresented among the poor, CLEP has not explicitly considered the situation of people with disabilities. Objectives: To examine the empirical evidence for the relevance of the CLEP legal empowerment measures to people with disabilities in low- and lower middle-income countries, and to evaluate the extent to which the Convention on the Rights of Persons with Disabilities (CRPD addresses those measures. Methods: Critical literature review of empirical studies and a checklist assessment of the CRPD. Results: Fourteen included articles confirm that people with disabilities experience problems in the domains of access to justice and the rule of law, labor rights, and business rights. No texts on property rights were found. Evidence for the effectiveness of the proposed measures is insufficient. Overall, the CRPD fully or partially supports two-thirds of the proposed measures (seven out of nine measures for access to justice and the rule of law, none of the five measures for property rights, all seven measures for labor rights, and six out of nine measures for business rights. Conclusions: Although most of the domains of the CLEP legal empowerment measures are relevant to people with disabilities from both empirical and normative perspectives, it is uncertain whether the devised measures are of immediate relevance to them. Further research is warranted in this regard.

Thoughts on Improvable Objects, Contradiction and Object/Tool Reciprocity in a Study of Zoo Educator Professional Development

Science.gov (United States)

Ash, Doris B.; Kelly, Lisa-Anne DeGregoria

2013-01-01

In this forum we discuss three aspects designed to clarify and extend Kelly and Kassing's paper. These are the roles of improvable objects, contradiction and object/tool reciprocity. In each case we cite relevant literature and pose questions to the field. Our goal is to seed ideas for future discussions concerning the role of activity theory…

Parallel object-oriented decision tree system

Science.gov (United States)

Kamath,; Chandrika, Cantu-Paz [Dublin, CA; Erick, [Oakland, CA

2006-02-28

A data mining decision tree system that uncovers patterns, associations, anomalies, and other statistically significant structures in data by reading and displaying data files, extracting relevant features for each of the objects, and using a method of recognizing patterns among the objects based upon object features through a decision tree that reads the data, sorts the data if necessary, determines the best manner to split the data into subsets according to some criterion, and splits the data.

Feature-selective Attention in Frontoparietal Cortex: Multivoxel Codes Adjust to Prioritize Task-relevant Information.

Science.gov (United States)

Jackson, Jade; Rich, Anina N; Williams, Mark A; Woolgar, Alexandra

2017-02-01

Human cognition is characterized by astounding flexibility, enabling us to select appropriate information according to the objectives of our current task. A circuit of frontal and parietal brain regions, often referred to as the frontoparietal attention network or multiple-demand (MD) regions, are believed to play a fundamental role in this flexibility. There is evidence that these regions dynamically adjust their responses to selectively process information that is currently relevant for behavior, as proposed by the "adaptive coding hypothesis" [Duncan, J. An adaptive coding model of neural function in prefrontal cortex. Nature Reviews Neuroscience, 2, 820-829, 2001]. Could this provide a neural mechanism for feature-selective attention, the process by which we preferentially process one feature of a stimulus over another? We used multivariate pattern analysis of fMRI data during a perceptually challenging categorization task to investigate whether the representation of visual object features in the MD regions flexibly adjusts according to task relevance. Participants were trained to categorize visually similar novel objects along two orthogonal stimulus dimensions (length/orientation) and performed short alternating blocks in which only one of these dimensions was relevant. We found that multivoxel patterns of activation in the MD regions encoded the task-relevant distinctions more strongly than the task-irrelevant distinctions: The MD regions discriminated between stimuli of different lengths when length was relevant and between the same objects according to orientation when orientation was relevant. The data suggest a flexible neural system that adjusts its representation of visual objects to preferentially encode stimulus features that are currently relevant for behavior, providing a neural mechanism for feature-selective attention.

Perceptual Plasticity for Auditory Object Recognition

Science.gov (United States)

Heald, Shannon L. M.; Van Hedger, Stephen C.; Nusbaum, Howard C.

2017-01-01

In our auditory environment, we rarely experience the exact acoustic waveform twice. This is especially true for communicative signals that have meaning for listeners. In speech and music, the acoustic signal changes as a function of the talker (or instrument), speaking (or playing) rate, and room acoustics, to name a few factors. Yet, despite this acoustic variability, we are able to recognize a sentence or melody as the same across various kinds of acoustic inputs and determine meaning based on listening goals, expectations, context, and experience. The recognition process relates acoustic signals to prior experience despite variability in signal-relevant and signal-irrelevant acoustic properties, some of which could be considered as “noise” in service of a recognition goal. However, some acoustic variability, if systematic, is lawful and can be exploited by listeners to aid in recognition. Perceivable changes in systematic variability can herald a need for listeners to reorganize perception and reorient their attention to more immediately signal-relevant cues. This view is not incorporated currently in many extant theories of auditory perception, which traditionally reduce psychological or neural representations of perceptual objects and the processes that act on them to static entities. While this reduction is likely done for the sake of empirical tractability, such a reduction may seriously distort the perceptual process to be modeled. We argue that perceptual representations, as well as the processes underlying perception, are dynamically determined by an interaction between the uncertainty of the auditory signal and constraints of context. This suggests that the process of auditory recognition is highly context-dependent in that the identity of a given auditory object may be intrinsically tied to its preceding context. To argue for the flexible neural and psychological updating of sound-to-meaning mappings across speech and music, we draw upon examples

Relevant test set using feature selection algorithm for early detection ...

African Journals Online (AJOL)

The objective of feature selection is to find the most relevant features for classification. Thus, the dimensionality of the information will be reduced and may improve classification's accuracy. This paper proposed a minimum set of relevant questions that can be used for early detection of dyslexia. In this research, we ...

Seeing without knowing: task relevance dissociates between visual awareness and recognition.

Science.gov (United States)

Eitam, Baruch; Shoval, Roy; Yeshurun, Yaffa

2015-03-01

We demonstrate that task relevance dissociates between visual awareness and knowledge activation to create a state of seeing without knowing-visual awareness of familiar stimuli without recognizing them. We rely on the fact that in order to experience a Kanizsa illusion, participants must be aware of its inducers. While people can indicate the orientation of the illusory rectangle with great ease (signifying that they have consciously experienced the illusion's inducers), almost 30% of them could not report the inducers' color. Thus, people can see, in the sense of phenomenally experiencing, but not know, in the sense of recognizing what the object is or activating appropriate knowledge about it. Experiment 2 tests whether relevance-based selection operates within objects and shows that, contrary to the pattern of results found with features of different objects in our previous studies and replicated in Experiment 1, selection does not occur when both relevant and irrelevant features belong to the same object. We discuss these findings in relation to the existing theories of consciousness and to attention and inattentional blindness, and the role of cognitive load, object-based attention, and the use of self-reports as measures of awareness. © 2015 New York Academy of Sciences.

Broad-Band Variability in Accreting Compact Objects

Directory of Open Access Journals (Sweden)

S. Scaringi

2015-02-01

Full Text Available Cataclysmic variable stars are in many ways similar to X-ray binaries. Both types of systems possess an accretion disk, which in most cases can reach the surface (or event horizon of the central compact object. The main difference is that the embedded gravitational potential well in X-ray binaries is much deeper than those found in cataclysmic variables. As a result, X-ray binaries emit most of their radiation at X-ray wavelengths, as opposed to cataclysmic variables which emit mostly at optical/ultraviolet wavelengths. Both types of systems display aperiodic broad-band variability which can be associated to the accretion disk. Here, the properties of the observed X-ray variability in XRBs are compared to those observed at optical wavelengths in CVs. In most cases the variability properties of both types of systems are qualitatively similar once the relevant timescales associated with the inner accretion disk regions have been taken into account. The similarities include the observed power spectral density shapes, the rms-flux relation as well as Fourier-dependant time lags. Here a brief overview on these similarities is given, placing them in the context of the fluctuating accretion disk model which seeks to reproduce the observed variability.

SWORS: a system for the efficient retrieval of relevant spatial web objects

DEFF Research Database (Denmark)

Cao, Xin; Cong, Gao; Jensen, Christian S.

2012-01-01

Spatial web objects that possess both a geographical location and a textual description are gaining in prevalence. This gives prominence to spatial keyword queries that exploit both location and textual arguments. Such queries are used in many web services such as yellow pages and maps services....

Subordinate-level object classification reexamined.

Science.gov (United States)

Biederman, I; Subramaniam, S; Bar, M; Kalocsai, P; Fiser, J

1999-01-01

The classification of a table as round rather than square, a car as a Mazda rather than a Ford, a drill bit as 3/8-inch rather than 1/4-inch, and a face as Tom have all been regarded as a single process termed "subordinate classification." Despite the common label, the considerable heterogeneity of the perceptual processing required to achieve such classifications requires, minimally, a more detailed taxonomy. Perceptual information relevant to subordinate-level shape classifications can be presumed to vary on continua of (a) the type of distinctive information that is present, nonaccidental or metric, (b) the size of the relevant contours or surfaces, and (c) the similarity of the to-be-discriminated features, such as whether a straight contour has to be distinguished from a contour of low curvature versus high curvature. We consider three, relatively pure cases. Case 1 subordinates may be distinguished by a representation, a geon structural description (GSD), specifying a nonaccidental characterization of an object's large parts and the relations among these parts, such as a round table versus a square table. Case 2 subordinates are also distinguished by GSDs, except that the distinctive GSDs are present at a small scale in a complex object so the location and mapping of the GSDs are contingent on an initial basic-level classification, such as when we use a logo to distinguish various makes of cars. Expertise for Cases 1 and 2 can be easily achieved through specification, often verbal, of the GSDs. Case 3 subordinates, which have furnished much of the grist for theorizing with "view-based" template models, require fine metric discriminations. Cases 1 and 2 account for the overwhelming majority of shape-based basic- and subordinate-level object classifications that people can and do make in their everyday lives. These classifications are typically made quickly, accurately, and with only modest costs of viewpoint changes. Whereas the activation of an array of

Object Knowledge Modulates Colour Appearance

Directory of Open Access Journals (Sweden)

Christoph Witzel

2011-01-01

Full Text Available We investigated the memory colour effect for colour diagnostic artificial objects. Since knowledge about these objects and their colours has been learned in everyday life, these stimuli allow the investigation of the influence of acquired object knowledge on colour appearance. These investigations are relevant for questions about how object and colour information in high-level vision interact as well as for research about the influence of learning and experience on perception in general. In order to identify suitable artificial objects, we developed a reaction time paradigm that measures (subjective colour diagnosticity. In the main experiment, participants adjusted sixteen such objects to their typical colour as well as to grey. If the achromatic object appears in its typical colour, then participants should adjust it to the opponent colour in order to subjectively perceive it as grey. We found that knowledge about the typical colour influences the colour appearance of artificial objects. This effect was particularly strong along the daylight axis.

Object knowledge modulates colour appearance

Science.gov (United States)

Witzel, Christoph; Valkova, Hanna; Hansen, Thorsten; Gegenfurtner, Karl R

2011-01-01

We investigated the memory colour effect for colour diagnostic artificial objects. Since knowledge about these objects and their colours has been learned in everyday life, these stimuli allow the investigation of the influence of acquired object knowledge on colour appearance. These investigations are relevant for questions about how object and colour information in high-level vision interact as well as for research about the influence of learning and experience on perception in general. In order to identify suitable artificial objects, we developed a reaction time paradigm that measures (subjective) colour diagnosticity. In the main experiment, participants adjusted sixteen such objects to their typical colour as well as to grey. If the achromatic object appears in its typical colour, then participants should adjust it to the opponent colour in order to subjectively perceive it as grey. We found that knowledge about the typical colour influences the colour appearance of artificial objects. This effect was particularly strong along the daylight axis. PMID:23145224

Why ritual plant use has ethnopharmacological relevance

NARCIS (Netherlands)

Quiroz, Diana; Sosef, Marc; Andel, Van Tinde

2016-01-01

Ethnopharmacological relevance Although ritual plant use is now recognised both for its socio-cultural importance and for its contribution to nature conservation, its potential pharmacological effects remain overlooked. Aim of the study Our objective was to see whether ritual plant use could have

Intelligent sensor in control systems for objects with changing thermophysical properties

Science.gov (United States)

Belousov, O. A.; Muromtsev, D. Yu; Belyaev, M. P.

2018-04-01

The control of heat devices in a wide temperature range given thermophysical properties of an object is a topical issue. Optimal control systems of electric furnaces have to meet strict requirements in terms of accuracy of production procedures and efficiency of energy consumption. The fulfillment of these requirements is possible only if the dynamics model describing adequately the processes occurring in the furnaces is used to calculate the optimal control actions. One of the types of electric furnaces is the electric chamber furnace intended for heat treatment of various materials at temperatures from thousands of degrees Celsius and above. To solve the above-mentioned problem and to determine its place in the system of energy-efficient control of dynamic modes in the electric furnace, we propose the concept of an intelligent sensor and a method of synthesizing variables on sets of functioning states. The use of synthesis algorithms for optimal control in real time ensures the required accuracy when operating under different conditions and operating modes of the electric chamber furnace.

Properties of molecular clouds containing Herbig-Haro objects

International Nuclear Information System (INIS)

Loren, R.B.; Evans, N.J. II; Knapp, G.R.

1979-01-01

We have studied the physical conditions in the molecular clouds associated with a large number of Herbig-Haro and related objects. Formaldehyde emission at 2 mm was detected in the direction of approx.15 out of 30 objects observed. Using the 2 mm H 2 CO emission and observations of 2 cm H 2 CO absorption, along the the 2.6 mm CO line, we calculate core densities of these molecular clouds. Dense cores are found near but not necessarily coincident with the HH objects. Known embedded infrared sources are more likely to be at the position of greatest density than are the HH objects themselves. The densities determined for the cloud cores are intermediate between the densities of cold, dark clouds such as L134 N and the hot clouds associated with H II regions. Thus, a continuous spectrum of densities is observed in molecular clouds. The temperature and density of the clouds in this study are not well correlated. The cores associated with HH 29 IR and T Tau are very dense (6 x 10 4 and 9 x 10 4 cm -3 ), yet have temperatures typical of cold dark clouds.The strong inverse correlation between X (H 2 CO) and density found by Wootten et al. is also found in the clouds associated with HH objects. This correlation also holds within a single cloud, indicating that the correlation is not due to differences in cloud age and evolution toward gas-phase chemical equilibrium. The decrease of X (H 2 CO) with density is more rapid than predicted by steady state ion-molecule chemistry and may be the result of increased depletion of molecules onto grain surfaces at higher density

Registration of Space Objects

Science.gov (United States)

Schmidt-Tedd, Bernhard

2017-07-01

Space objects are subject to registration in order to allocate "jurisdiction and control" over those objects in the sovereign-free environment of outer space. This approach is similar to the registration of ships in view of the high sea and for aircrafts with respect to the international airspace. Registration is one of the basic principles of space law, starting with UN General Assembly Resolution 1721 B (XVI) of December 20, 1961, followed by Resolution 1962 (XVIII) of December 13, 1963, then formulated in Article VIII of the Outer Space Treaty of 1967 and as specified in the Registration Convention of 1975. Registration of space objects can be seen today as a principle of customary international law, relevant for each spacefaring state. Registration is divided into a national and an international level. The State Party establishes a national registry for its space objects, and those registrations have to be communicated via diplomatic channel to the UN Register of space objects. This UN Register is handled by the UN Office for Outer Space Affairs (UNOOSA) and is an open source of information for space objects worldwide. Registration is linked to the so-called launching state of the relevant space object. There might be more than one launching state for the specific launch event, but only one state actor can register a specific space object. The state of registry gains "jurisdiction and control" over the space object and therefore no double registration is permissible. Based on the established UN Space Law, registration practice was subject to some adaptions due to technical developments and legal challenges. After the privatization of the major international satellite organizations, a number of non-registrations had to be faced. The state actors reacted with the UN Registration Practice Resolution of 2007 as elaborated in the Legal Subcommittee of UNCOPUOS, the Committee for the Peaceful Use of Outer Space. In this context an UNOOSA Registration Information

A Comparative Analysis of Structured and Object-Oriented ...

African Journals Online (AJOL)

The concepts of structured and object-oriented programming methods are not relatively new but these approaches are still very much useful and relevant in today's programming paradigm. In this paper, we distinguish the features of structured programs from that of object oriented programs. Structured programming is a ...

Extracting Spatiotemporal Objects from Raster Data to Represent Physical Features and Analyze Related Processes

Science.gov (United States)

Zollweg, J. A.

2017-10-01

Numerous ground-based, airborne, and orbiting platforms provide remotely-sensed data of remarkable spatial resolution at short time intervals. However, this spatiotemporal data is most valuable if it can be processed into information, thereby creating meaning. We live in a world of objects: cars, buildings, farms, etc. On a stormy day, we don't see millions of cubes of atmosphere; we see a thunderstorm `object'. Temporally, we don't see the properties of those individual cubes changing, we see the thunderstorm as a whole evolving and moving. There is a need to represent the bulky, raw spatiotemporal data from remote sensors as a small number of relevant spatiotemporal objects, thereby matching the human brain's perception of the world. This presentation reveals an efficient algorithm and system to extract the objects/features from raster-formatted remotely-sensed data. The system makes use of the Python object-oriented programming language, SciPy/NumPy for matrix manipulation and scientific computation, and export/import to the GeoJSON standard geographic object data format. The example presented will show how thunderstorms can be identified and characterized in a spatiotemporal continuum using a Python program to process raster data from NOAA's High-Resolution Rapid Refresh v2 (HRRRv2) data stream.

The Statistical Properties of Galaxies Containing Ultraluminous X-Ray Objects

Science.gov (United States)

Ptak, A.; Colbert, E.

2004-05-01

We present a statistical analysis of the properties of galaxies containing ultraluminous X-ray objects (ULXs). Our primary goal is to establish the fraction of galaxies containing a ULX as a function of ULX luminosity. Our sample is based on ROSAT HRI observations of galaxies. We find that ~12% of galaxies contain at least one ULX with LX>1039 ergs s-1, and ~1% of galaxies contain at least one ULX with LX>1040 ergs s-1. These ULX frequencies are lower limits, since ROSAT HRI observations would miss absorbed ULXs (i.e., with NH>~1021cm-2) and those within ~10" of the nucleus (due to the positional error circle of the ROSAT HRI). The Hubble type distribution of galaxies with a ULX differs significantly from the distribution of types for nearby Third Reference Catalog galaxies but does not differ significantly from the galaxy type distribution of galaxies observed by the HRI in general. We find no increase in the mean far-infrared (FIR) luminosity or FIR/K-band luminosity ratio for galaxies with a ULX relative to galaxies observed by the HRI in general; however, this result is also most likely biased by the soft bandpass of the HRI and the relatively low number of high star formation rate galaxies observed by the HRI with enough sensitivity to detect a ULX.

Variability of Extragalactic Objects in Relation to Redshift, Color ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

properties of the objects, viz., redshift, color indices, radio spectral index ... properties of different types of closely related objects are expected to throw light on the ...... z = 3.0, OVV objects are concentrated at the lower range of the scale, mostly at ..... from the practical point of view in the sense that redshifts can be predicted ...

The Tools Used by Science Teachers and Their Relevance to Objectives

Directory of Open Access Journals (Sweden)

Ulaş KUBAT

2018-01-01

Full Text Available The aim of this study is to reveal the views of science teachers on the use of tools in the learning-teaching process. Well-designed tools provide a rich learning environment. In this research qualitative research method was used. Semi-structured interview form was used as data collection tool. The working group consisted of 16 science teachers. According to the findings of the research, teachers use the most experimental materials as tools and teaching materials and 4 + 4 + 4 system creates problems for tools and materials. In addition, teachers have emphasized the problem of lack of material development. They indicated that well designed tools contribute to the achievement of objectives

Attention to Attributes and Objects in Working Memory

Science.gov (United States)

Cowan, Nelson; Blume, Christopher L.; Saults, J. Scott

2013-01-01

It has been debated on the basis of change-detection procedures whether visual working memory is limited by the number of objects, task-relevant attributes within those objects, or bindings between attributes. This debate, however, has been hampered by several limitations, including the use of conditions that vary between studies and the absence…

Creating Objects and Object Categories for Studying Perception and Perceptual Learning

Science.gov (United States)

Hauffen, Karin; Bart, Eugene; Brady, Mark; Kersten, Daniel; Hegdé, Jay

2012-01-01

In order to quantitatively study object perception, be it perception by biological systems or by machines, one needs to create objects and object categories with precisely definable, preferably naturalistic, properties1. Furthermore, for studies on perceptual learning, it is useful to create novel objects and object categories (or object classes) with such properties2. Many innovative and useful methods currently exist for creating novel objects and object categories3-6 (also see refs. 7,8). However, generally speaking, the existing methods have three broad types of shortcomings. First, shape variations are generally imposed by the experimenter5,9,10, and may therefore be different from the variability in natural categories, and optimized for a particular recognition algorithm. It would be desirable to have the variations arise independently of the externally imposed constraints. Second, the existing methods have difficulty capturing the shape complexity of natural objects11-13. If the goal is to study natural object perception, it is desirable for objects and object categories to be naturalistic, so as to avoid possible confounds and special cases. Third, it is generally hard to quantitatively measure the available information in the stimuli created by conventional methods. It would be desirable to create objects and object categories where the available information can be precisely measured and, where necessary, systematically manipulated (or 'tuned'). This allows one to formulate the underlying object recognition tasks in quantitative terms. Here we describe a set of algorithms, or methods, that meet all three of the above criteria. Virtual morphogenesis (VM) creates novel, naturalistic virtual 3-D objects called 'digital embryos' by simulating the biological process of embryogenesis14. Virtual phylogenesis (VP) creates novel, naturalistic object categories by simulating the evolutionary process of natural selection9,12,13. Objects and object categories created

Endogenous property rights

NARCIS (Netherlands)

Dari-Mattiacci, G.; Guerriero, C.

2014-01-01

Albeit the relevance of property rights is well known, their determinants are still poorly understood. When property is fully protected, some buyers with valuation higher than that of original owners are inefficiently excluded from trade due to transaction costs. When protection of property is weak,

Safety-relevant hydrogeological properties of the claystone barrier of a Swiss radioactive waste repository: An evaluation using multiple lines of evidence

Science.gov (United States)

Gautschi, Andreas

2017-09-01

In Switzerland, the Opalinus Clay - a Jurassic (Aalenian) claystone formation - has been proposed as the first-priority host rock for a deep geological repository for both low- and intermediate-level and high-level radioactive wastes. An extensive site and host rock investigation programme has been carried out during the past 30 years in Northern Switzerland, comprising extensive 2D and 3D seismic surveys, a series of deep boreholes within and around potential geological siting regions, experiments in the international Mont Terri Rock Laboratory, compilations of data from Opalinus Clay in railway and motorway tunnels and comparisons with similar rocks. The hydrogeological properties of the Opalinus Clay that are relevant from the viewpoint of long-term safety are described and illustrated. The main conclusions are supported by multiple lines of evidence, demonstrating consistency of conclusions based on hydraulic properties, porewater chemistry, distribution of natural tracers across the Opalinus Clay as well as small- and large-scale diffusion models and the derived conceptual understanding of solute transport.

Object attributes combine additively in visual search.

Science.gov (United States)

Pramod, R T; Arun, S P

2016-01-01

We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes.

Insider Trading B-side: relevance, timeliness and position influence

Directory of Open Access Journals (Sweden)

Luiz Felipe de A. Pontes Girão

2015-12-01

Full Text Available Objective – Our main objective is to analyze the impacto f insider trading on stock investments’ decision. Design/methodology/approach – We used an online survey, obtaining 271 valid answers. To analyze our data, we used some parametric (t and F Anova, and non-parametric techniques (Mann-Whitney and Kruskal-Wallis. Findings – We find that insider tradings are relevant to investment decisions, and the timeliness also exert an influence to this kind of decision, especially abnormal trades. Practical implications – In practical terms, our results suggests that the Brazilian Securities and Exchange Commission (CVM must update the Brazilian insider trading regulation to achieve the objective to protect investors. In the investors point of view, this possible update could improve investors’ ability to control insiders and follow his activities as well as to mimic his trades. Originality/value – The originality of our paper is an analysis of relevance, timeliness and influence of position in a firm as “determinants” of investment decisions. We use these three specific characteristics to criticize the Brazilian insider trading regulation.

MULTIPLE OBJECTS

Directory of Open Access Journals (Sweden)

A. A. Bosov

2015-04-01

Full Text Available Purpose. The development of complicated techniques of production and management processes, information systems, computer science, applied objects of systems theory and others requires improvement of mathematical methods, new approaches for researches of application systems. And the variety and diversity of subject systems makes necessary the development of a model that generalizes the classical sets and their development – sets of sets. Multiple objects unlike sets are constructed by multiple structures and represented by the structure and content. The aim of the work is the analysis of multiple structures, generating multiple objects, the further development of operations on these objects in application systems. Methodology. To achieve the objectives of the researches, the structure of multiple objects represents as constructive trio, consisting of media, signatures and axiomatic. Multiple object is determined by the structure and content, as well as represented by hybrid superposition, composed of sets, multi-sets, ordered sets (lists and heterogeneous sets (sequences, corteges. Findings. In this paper we study the properties and characteristics of the components of hybrid multiple objects of complex systems, proposed assessments of their complexity, shown the rules of internal and external operations on objects of implementation. We introduce the relation of arbitrary order over multiple objects, we define the description of functions and display on objects of multiple structures. Originality.In this paper we consider the development of multiple structures, generating multiple objects.Practical value. The transition from the abstract to the subject of multiple structures requires the transformation of the system and multiple objects. Transformation involves three successive stages: specification (binding to the domain, interpretation (multiple sites and particularization (goals. The proposed describe systems approach based on hybrid sets

EXTRACTING SPATIOTEMPORAL OBJECTS FROM RASTER DATA TO REPRESENT PHYSICAL FEATURES AND ANALYZE RELATED PROCESSES

Directory of Open Access Journals (Sweden)

J. A. Zollweg

2017-10-01

Full Text Available Numerous ground-based, airborne, and orbiting platforms provide remotely-sensed data of remarkable spatial resolution at short time intervals. However, this spatiotemporal data is most valuable if it can be processed into information, thereby creating meaning. We live in a world of objects: cars, buildings, farms, etc. On a stormy day, we don’t see millions of cubes of atmosphere; we see a thunderstorm ‘object’. Temporally, we don’t see the properties of those individual cubes changing, we see the thunderstorm as a whole evolving and moving. There is a need to represent the bulky, raw spatiotemporal data from remote sensors as a small number of relevant spatiotemporal objects, thereby matching the human brain’s perception of the world. This presentation reveals an efficient algorithm and system to extract the objects/features from raster-formatted remotely-sensed data. The system makes use of the Python object-oriented programming language, SciPy/NumPy for matrix manipulation and scientific computation, and export/import to the GeoJSON standard geographic object data format. The example presented will show how thunderstorms can be identified and characterized in a spatiotemporal continuum using a Python program to process raster data from NOAA’s High-Resolution Rapid Refresh v2 (HRRRv2 data stream.

The Mission Accessible Near-Earth Object Survey (MANOS): Project Overview

Science.gov (United States)

Moskovitz, Nicholas; Polishook, David; Thomas, Cristina; Willman, Mark; DeMeo, Francesca; Mommert, Michael; Endicott, Thomas; Trilling, David; Binzel, Richard; Hinkle, Mary; Siu, Hosea; Neugent, Kathryn; Christensen, Eric; Person, Michael; Burt, Brian; Grundy, Will; Roe, Henry; Abell, Paul; Busch, Michael

2014-11-01

The Mission Accessible Near-Earth Object Survey (MANOS) began in August 2013 as a multi-year physical characterization survey that was awarded survey status by NOAO. MANOS will target several hundred mission-accessible NEOs across visible and near-infrared wavelengths, ultimately providing a comprehensive catalog of physical properties (astrometry, light curves, spectra). Particular focus is paid to sub-km NEOs, for which little data currently exists. These small bodies are essential to understanding the link between meteorites and asteroids, pose the most immediate impact hazard to the Earth, and are highly relevant to a variety of planetary mission scenarios. Accessing these targets is enabled through a combination of classical, queue, and target-of-opportunity observations carried out at 1- to 8-meter class facilities in both the northern and southern hemispheres. The MANOS observing strategy is specifically designed to rapidly characterize newly discovered NEOs before they fade beyond observational limits. MANOS will provide major advances in our understanding of the NEO population as a whole and for specific objects of interest. Here we present an overview of the survey, progress to date, and early science highlights including: (1) an estimate of the taxonomic distribution of spectral types for NEOs smaller than ~100 meters, (2) the distribution of rotational properties for approximately 100 previously unstudied objects, (3) models for the dynamical evolution of the overall NEO population over the past 0.5 Myr, and (4) progress in developing a new set of online tools at asteroid.lowell.edu that will enable near realtime public dissemination of our data while providing a portal to facilitate coordination efforts within the small body observer community.MANOS is supported through telescope allocations from NOAO and Lowell Observatory. We acknowledge funding support from an NSF Astronomy and Astrophysics Postdoctoral Fellowship to N. Moskovitz and NASA NEOO grant

Relevance of the Mention of Antioxidant Properties in Yogurt Labels: In Vitro Evaluation and Chromatographic Analysis.

Science.gov (United States)

Pereira, Eliana; Barros, Lillian; Ferreira, Isabel C F R

2013-06-18

The purpose of the inclusion of fruit (natural additives) in yogurt aims to increase its antioxidant activity and functionality. Herein, a comparative study of the antioxidant potential of yogurts with pieces of various fruits was performed, including yogurts with mention of antioxidant properties in the label. Free radicals scavenging activity, reducing power and inhibition of lipid peroxidation were evaluated by in vitro assays, as were the contents in antioxidants such as phenolics, flavonoids, sugars and tocopherols. After analyzing thirteen yogurts containing fruit pieces and a natural one (control), the most interesting were yogurts with pieces of berries (for phenolics, flavonoids and 2,2-dipheny-1-picrylhydrazyl (DPPH) scavenging activity), pineapple (for reducing power), blackberry (for β-carotene bleaching inhibition), blackberry "antioxidant" (for tocopherols) and cherry (for sugars). The mention of "antioxidant" in the label was relevant for tocopherols, sugars, DPPH scavenging activity and reducing power. No synergisms were observed in yogurts prepared with pieces of different fruits. Nevertheless, the addition of fruit pieces to yogurt was favorable for antioxidant content, increasing the protection of the consumer against diseases related to oxidative stress.

Sexual Health Curricula in U.S. Medical Schools: Current Educational Objectives

Science.gov (United States)

Galletly, Carol; Lechuga, Julia; Layde, Joseph B.; Pinkerton, Steven

2010-01-01

Objective: The authors identify the explicit and implicit objectives that shape decisions about what medical schools teach regarding human sexuality. Methods: The authors reviewed relevant articles in journals, physician licensing examinations, and publications by professional organizations to identify learning objectives for human sexuality in…

Change detection in urban and rural driving scenes: Effects of target type and safety relevance on change blindness.

Science.gov (United States)

Beanland, Vanessa; Filtness, Ashleigh J; Jeans, Rhiannon

2017-03-01

The ability to detect changes is crucial for safe driving. Previous research has demonstrated that drivers often experience change blindness, which refers to failed or delayed change detection. The current study explored how susceptibility to change blindness varies as a function of the driving environment, type of object changed, and safety relevance of the change. Twenty-six fully-licenced drivers completed a driving-related change detection task. Changes occurred to seven target objects (road signs, cars, motorcycles, traffic lights, pedestrians, animals, or roadside trees) across two environments (urban or rural). The contextual safety relevance of the change was systematically manipulated within each object category, ranging from high safety relevance (i.e., requiring a response by the driver) to low safety relevance (i.e., requiring no response). When viewing rural scenes, compared with urban scenes, participants were significantly faster and more accurate at detecting changes, and were less susceptible to "looked-but-failed-to-see" errors. Interestingly, safety relevance of the change differentially affected performance in urban and rural environments. In urban scenes, participants were more efficient at detecting changes with higher safety relevance, whereas in rural scenes the effect of safety relevance has marginal to no effect on change detection. Finally, even after accounting for safety relevance, change blindness varied significantly between target types. Overall the results suggest that drivers are less susceptible to change blindness for objects that are likely to change or move (e.g., traffic lights vs. road signs), and for moving objects that pose greater danger (e.g., wild animals vs. pedestrians). Copyright © 2017 Elsevier Ltd. All rights reserved.

Some new mathematical methods for variational objective analysis

Science.gov (United States)

Wahba, Grace; Johnson, Donald R.

1994-01-01

Numerous results were obtained relevant to remote sensing, variational objective analysis, and data assimilation. A list of publications relevant in whole or in part is attached. The principal investigator gave many invited lectures, disseminating the results to the meteorological community as well as the statistical community. A list of invited lectures at meetings is attached, as well as a list of departmental colloquia at various universities and institutes.

Cognitive object recognition system (CORS)

Science.gov (United States)

Raju, Chaitanya; Varadarajan, Karthik Mahesh; Krishnamurthi, Niyant; Xu, Shuli; Biederman, Irving; Kelley, Troy

2010-04-01

We have developed a framework, Cognitive Object Recognition System (CORS), inspired by current neurocomputational models and psychophysical research in which multiple recognition algorithms (shape based geometric primitives, 'geons,' and non-geometric feature-based algorithms) are integrated to provide a comprehensive solution to object recognition and landmarking. Objects are defined as a combination of geons, corresponding to their simple parts, and the relations among the parts. However, those objects that are not easily decomposable into geons, such as bushes and trees, are recognized by CORS using "feature-based" algorithms. The unique interaction between these algorithms is a novel approach that combines the effectiveness of both algorithms and takes us closer to a generalized approach to object recognition. CORS allows recognition of objects through a larger range of poses using geometric primitives and performs well under heavy occlusion - about 35% of object surface is sufficient. Furthermore, geon composition of an object allows image understanding and reasoning even with novel objects. With reliable landmarking capability, the system improves vision-based robot navigation in GPS-denied environments. Feasibility of the CORS system was demonstrated with real stereo images captured from a Pioneer robot. The system can currently identify doors, door handles, staircases, trashcans and other relevant landmarks in the indoor environment.

Incremental Visualizer for Visible Objects

DEFF Research Database (Denmark)

Bukauskas, Linas; Bøhlen, Michael Hanspeter

This paper discusses the integration of database back-end and visualizer front-end into a one tightly coupled system. The main aim which we achieve is to reduce the data pipeline from database to visualization by using incremental data extraction of visible objects in a fly-through scenarios. We...... also argue that passing only relevant data from the database will substantially reduce the overall load of the visualization system. We propose the system Incremental Visualizer for Visible Objects (IVVO) which considers visible objects and enables incremental visualization along the observer movement...... path. IVVO is the novel solution which allows data to be visualized and loaded on the fly from the database and which regards visibilities of objects. We run a set of experiments to convince that IVVO is feasible in terms of I/O operations and CPU load. We consider the example of data which uses...

Abstract Object Creation in Dynamic Logic

NARCIS (Netherlands)

I. Grabe (Immo); F.S. de Boer (Frank); W. Ahrendt (Wolfgang); A. Cavalcanti; D.R. Dams

2009-01-01

textabstractIn this paper we give a representation of a weakest precondition calculus for abstract object creation in dynamic logic, the logic underlying the KeY theorem prover. This representation allows to both specify and verify properties of objects at the abstraction level of the

Quantum objects non-local correlation, causality and objective indefiniteness in the quantum world

CERN Document Server

Jaeger, Gregg

2013-01-01

This monograph identifies the essential characteristics of the objects described by current quantum theory and considers their relationship to space-time. In the process, it explicates the senses in which quantum objects may be consistently considered to have parts of which they may be composed or into which they may be decomposed. The book also demonstrates the degree to which reduction is possible in quantum mechanics, showing it to be related to the objective indefiniteness of quantum properties and the strong non-local correlations that can occur between the physical quantities of quantum

BIOPHYSICAL PROPERTIES OF NUCLEIC ACIDS AT SURFACES RELEVANT TO MICROARRAY PERFORMANCE

OpenAIRE

Rao, Archana N.; Grainger, David W.

2014-01-01

Both clinical and analytical metrics produced by microarray-based assay technology have recognized problems in reproducibility, reliability and analytical sensitivity. These issues are often attributed to poor understanding and control of nucleic acid behaviors and properties at solid-liquid interfaces. Nucleic acid hybridization, central to DNA and RNA microarray formats, depends on the properties and behaviors of single strand (ss) nucleic acids (e.g., probe oligomeric DNA) bound to surface...

Applying Fuzzy Possibilistic Methods on Critical Objects

DEFF Research Database (Denmark)

Yazdani, Hossein; Ortiz-Arroyo, Daniel; Choros, Kazimierz

2016-01-01

Providing a flexible environment to process data objects is a desirable goal of machine learning algorithms. In fuzzy and possibilistic methods, the relevance of data objects is evaluated and a membership degree is assigned. However, some critical objects objects have the potential ability to affect...... the performance of the clustering algorithms if they remain in a specific cluster or they are moved into another. In this paper we analyze and compare how critical objects affect the behaviour of fuzzy possibilistic methods in several data sets. The comparison is based on the accuracy and ability of learning...... methods to provide a proper searching space for data objects. The membership functions used by each method when dealing with critical objects is also evaluated. Our results show that relaxing the conditions of participation for data objects in as many partitions as they can, is beneficial....

Asteroid-comet continuum objects in the solar system.

Science.gov (United States)

Hsieh, Henry H

2017-07-13

In this review presented at the Royal Society meeting, 'Cometary science after Rosetta', I present an overview of studies of small solar system objects that exhibit properties of both asteroids and comets (with a focus on so-called active asteroids). Sometimes referred to as 'transition objects', these bodies are perhaps more appropriately described as 'continuum objects', to reflect the notion that rather than necessarily representing actual transitional evolutionary states between asteroids and comets, they simply belong to the general population of small solar system bodies that happen to exhibit a continuous range of observational, physical and dynamical properties. Continuum objects are intriguing because they possess many of the properties that make classical comets interesting to study (e.g. relatively primitive compositions, ejection of surface and subsurface material into space where it can be more easily studied, and orbital properties that allow us to sample material from distant parts of the solar system that would otherwise be inaccessible), while allowing us to study regions of the solar system that are not sampled by classical comets.This article is part of the themed issue 'Cometary science after Rosetta'. © 2017 The Author(s).

Assessing the scientific relevance of a single publication over time

Directory of Open Access Journals (Sweden)

Philipp A. Bloching

2013-09-01

Full Text Available Quantitatively assessing the scientific relevance of a research paper is challenging for two reasons. Firstly, scientific relevance may change over time, and secondly, it is unclear how to evaluate a recently published paper. The temporally averaged paper-specific impact factor is defined as the yearly average of citations to the paper until now including bonus citations equal to the journal impact factor in the publication year. This new measure subsequently allows relevance rankings and annual updates of all (i.e. both recent and older scientific papers of a department, or even a whole scientific field, on a more objective basis. It can also be used to assess both the average and overall time-dependent scientific relevance of researchers in a specific department or scientific field.

Parallel object-oriented data mining system

Science.gov (United States)

Kamath, Chandrika; Cantu-Paz, Erick

2004-01-06

A data mining system uncovers patterns, associations, anomalies and other statistically significant structures in data. Data files are read and displayed. Objects in the data files are identified. Relevant features for the objects are extracted. Patterns among the objects are recognized based upon the features. Data from the Faint Images of the Radio Sky at Twenty Centimeters (FIRST) sky survey was used to search for bent doubles. This test was conducted on data from the Very Large Array in New Mexico which seeks to locate a special type of quasar (radio-emitting stellar object) called bent doubles. The FIRST survey has generated more than 32,000 images of the sky to date. Each image is 7.1 megabytes, yielding more than 100 gigabytes of image data in the entire data set.

Object-based Landslide Mapping: Examples, Challenges and Opportunities

Science.gov (United States)

Hölbling, Daniel; Eisank, Clemens; Friedl, Barbara; Chang, Kang-Tsung; Tsai, Tsai-Tsung; Birkefeldt Møller Pedersen, Gro; Betts, Harley; Cigna, Francesca; Chiang, Shou-Hao; Aubrey Robson, Benjamin; Bianchini, Silvia; Füreder, Petra; Albrecht, Florian; Spiekermann, Raphael; Weinke, Elisabeth; Blaschke, Thomas; Phillips, Chris

2016-04-01

Over the last decade, object-based image analysis (OBIA) has been increasingly used for mapping landslides that occur after triggering events such as heavy rainfall. The increasing availability and quality of Earth Observation (EO) data in terms of temporal, spatial and spectral resolution allows for comprehensive mapping of landslides at multiple scales. Most often very high resolution (VHR) or high resolution (HR) optical satellite images are used in combination with a digital elevation model (DEM) and its products such as slope and curvature. Semi-automated object-based mapping makes use of various characteristics of image objects that are derived through segmentation. OBIA enables numerous spectral, spatial, contextual and textural image object properties to be applied during an analysis. This is especially useful when mapping complex natural features such as landslides and constitutes an advantage over pixel-based image analysis. However, several drawbacks in the process of object-based landslide mapping have not been overcome yet. The developed classification routines are often rather complex and limited regarding their transferability across areas and sensors. There is still more research needed to further improve present approaches and to fully exploit the capabilities of OBIA for landslide mapping. In this study several examples of object-based landslide mapping from various geographical regions with different characteristics are presented. Examples from the Austrian and Italian Alps are shown, whereby one challenge lies in the detection of small-scale landslides on steep slopes while preventing the classification of false positives with similar spectral properties (construction areas, utilized land, etc.). Further examples feature landslides mapped in Iceland, where the differentiation of landslides from other landscape-altering processes in a highly dynamic volcanic landscape poses a very distinct challenge, and in Norway, which is exposed to multiple

The Netherlands XTC Toxicity (NeXT) study: objectives and methods of a study investigating causality, course, and clinical relevance.

Science.gov (United States)

De Win, Maartje M L; Jager, Gerry; Vervaeke, Hylke K E; Schilt, Thelma; Reneman, Liesbeth; Booij, Jan; Verhulst, Frank C; Den Heeten, Gerard J; Ramsey, Nick F; Korf, Dirk J; Van den Brink, Wim

2005-01-01

This paper describes the objectives and methods of The Netherlands XTC Toxicity (NeXT) study focussing on the causality, course, and clinical relevance of ecstasy neurotoxicity. Previous studies suggest that ecstasy (3,4 methylene-dioxymethamphetamine, MDMA, XTC) is toxic toward brain serotonin axons, but most of these studies have serious methodological limitations. The current study is a combination of different approaches with three substudies: (1) a crosssectional substudy among heavy ecstasy users and controls with variation in drug use, which will provide information about potential neurotoxic consequences of ecstasy in relation to other drugs; (2) a prospective cohort substudy in ecstasy-naive subjects with high risk for future ecstasy use, which will provide information on the causality and short-term course of ecstasy use and potential neurotoxicity, and (3) a retrospective cohort substudy in lifetime ecstasy users and matched controls of an existing epidemiological sample that will provide information on long-term course and outcome of ecstasy use in the general population. Neurotoxicity is studied using (a) different imaging techniques (beta-CIT SPECT, 1H-MR spectroscopy, diffusion tensor imaging, perfusion weighted imaging and functional magnetic resonance imaging), and (b) neuropsychological and psychiatric assessments of memory, depression, and personality. The combined results will lead to conclusions that can be used in prevention messages, clinical decision making, and the development of an (inter)national ecstasy policy.

The Bible as Transformational Object: The Psychoanalytic Theories of Christopher Bollas and Their Relevance for Religious Educators

Science.gov (United States)

DeGear, Elizabeth Berne

2016-01-01

This article examines the psychoanalytic concepts of object-relations theorist Christopher Bollas, applying them to a view of the Bible as "transformational object." Emphasizing the connection between psychological process and religious experience, this article suggests that each person's innate ability to choose and use objects is a key…

Motivational Objects in Natural Scenes (MONS): A Database of >800 Objects.

Science.gov (United States)

Schomaker, Judith; Rau, Elias M; Einhäuser, Wolfgang; Wittmann, Bianca C

2017-01-01

In daily life, we are surrounded by objects with pre-existing motivational associations. However, these are rarely controlled for in experiments with natural stimuli. Research on natural stimuli would therefore benefit from stimuli with well-defined motivational properties; in turn, such stimuli also open new paths in research on motivation. Here we introduce a database of Motivational Objects in Natural Scenes (MONS). The database consists of 107 scenes. Each scene contains 2 to 7 objects placed at approximately equal distance from the scene center. Each scene was photographed creating 3 versions, with one object ("critical object") being replaced to vary the overall motivational value of the scene (appetitive, aversive, and neutral), while maintaining high visual similarity between the three versions. Ratings on motivation, valence, arousal and recognizability were obtained using internet-based questionnaires. Since the main objective was to provide stimuli of well-defined motivational value, three motivation scales were used: (1) Desire to own the object; (2) Approach/Avoid; (3) Desire to interact with the object. Three sets of ratings were obtained in independent sets of observers: for all 805 objects presented on a neutral background, for 321 critical objects presented in their scene context, and for the entire scenes. On the basis of the motivational ratings, objects were subdivided into aversive, neutral, and appetitive categories. The MONS database will provide a standardized basis for future studies on motivational value under realistic conditions.

Efficient Computation of Casimir Interactions between Arbitrary 3D Objects

International Nuclear Information System (INIS)

Reid, M. T. Homer; Rodriguez, Alejandro W.; White, Jacob; Johnson, Steven G.

2009-01-01

We introduce an efficient technique for computing Casimir energies and forces between objects of arbitrarily complex 3D geometries. In contrast to other recently developed methods, our technique easily handles nonspheroidal, nonaxisymmetric objects, and objects with sharp corners. Using our new technique, we obtain the first predictions of Casimir interactions in a number of experimentally relevant geometries, including crossed cylinders and tetrahedral nanoparticles.

Measurement properties of outcome measures for vitiligo. A systematic review.

Science.gov (United States)

Vrijman, Charlotte; Linthorst Homan, May W; Limpens, Jacqueline; van der Veen, Wietze; Wolkerstorfer, Albert; Terwee, Caroline B; Spuls, Phyllis I

2012-11-01

OBJECTIVE To summarize and critically appraise the evidence on the measurement properties of clinician-, patient-, and observer-reported outcomes, measuring any construct of interest in patients with all types of vitiligo. DATA SOURCES Electronic databases including PubMed (1948 to July 2011), OVID EMBASE (1980 to July 2011), and CINAHL (EBSCOhost) (1982 to July 2011) were searched. STUDY SELECTION Two authors independently screened all records for eligibility. For inclusion, the study population had to include patients with vitiligo, for which outcome measures were developed or evaluated on their measurement properties. The initial search retrieved 1249 records, of which 14 articles met the inclusion criteria. DATA EXTRACTION Characteristics of the included instruments, study population, and results of the measurement properties were extracted. The Consensus-Based Standards for the Selection of Health Status Measurement Instruments (COSMIN) 4-point checklist, combined with quality criteria for measurement properties, was used to calculate the overall level of evidence per measurement property of each instrument. Independent extraction and assessment was performed by 2 authors. DATA SYNTHESIS Eleven different measurement instruments were identified. Strong evidence was found for a positive internal consistency of the Dermatology Life Quality Index. For other instruments, the evidence of measurement properties was limited or unknown. CONCLUSIONS Recommendations on the use of specific outcome measures for vitiligo should be formulated with caution because current evidence is insufficient owing to a low number of studies with poor methodological quality and unclear clinical relevance. To recommend outcome measures for vitiligo, further research on measurement properties of clinical relevant outcome measures for vitiligo according to COSMIN quality criteria is needed.

On the Concepts of Usability and Reusability of Learning Objects

Directory of Open Access Journals (Sweden)

Miguel-Angel Sicilia

2003-10-01

Full Text Available “Reusable learning objects” oriented towards increasing their potential reusability are required to satisfy concerns about their granularity and their independence of concrete contexts of use. Such requirements also entail that the definition of learning object “usability,” and the techniques required to carry out their “usability evaluation” must be substantially different from those commonly used to characterize and evaluate the usability of conventional educational applications. In this article, a specific characterization of the concept of learning object usability is discussed, which places emphasis on “reusability,” the key property of learning objects residing in repositories. The concept of learning object reusability is described as the possibility and adequacy for the object to be usable in prospective educational settings, so that usability and reusability are considered two interrelated – and in many cases conflicting – properties of learning objects. Following the proposed characterization of two characteristics or properties of learning objects, a method to evaluate usability of specific learning objects will be presented.

Nanostructure symmetry: Relevance for physics and computing

International Nuclear Information System (INIS)

Dupertuis, Marc-André; Oberli, D. Y.; Karlsson, K. F.; Dalessi, S.; Gallinet, B.; Svendsen, G.

2014-01-01

We review the research done in recent years in our group on the effects of nanostructure symmetry, and outline its relevance both for nanostructure physics and for computations of their electronic and optical properties. The exemples of C3v and C2v quantum dots are used. A number of surprises and non-trivial aspects are outlined, and a few symmetry-based tools for computing and analysis are shortly presented

Nanostructure symmetry: Relevance for physics and computing

Energy Technology Data Exchange (ETDEWEB)

Dupertuis, Marc-André; Oberli, D. Y. [Laboratory for Physics of Nanostructure, EPF Lausanne (Switzerland); Karlsson, K. F. [Department of Physics, Chemistry, and Biology (IFM), Linköping University (Sweden); Dalessi, S. [Computational Biology Group, Department of Medical Genetics, University of Lausanne (Switzerland); Gallinet, B. [Nanophotonics and Metrology Laboratory, EPF Lausanne (Switzerland); Svendsen, G. [Dept. of Electronics and Telecom., Norwegian University of Science and Technology, Trondheim (Norway)

2014-03-31

We review the research done in recent years in our group on the effects of nanostructure symmetry, and outline its relevance both for nanostructure physics and for computations of their electronic and optical properties. The exemples of C3v and C2v quantum dots are used. A number of surprises and non-trivial aspects are outlined, and a few symmetry-based tools for computing and analysis are shortly presented.

Task-relevant information is prioritized in spatiotemporal contextual cueing.

Science.gov (United States)

Higuchi, Yoko; Ueda, Yoshiyuki; Ogawa, Hirokazu; Saiki, Jun

2016-11-01

Implicit learning of visual contexts facilitates search performance-a phenomenon known as contextual cueing; however, little is known about contextual cueing under situations in which multidimensional regularities exist simultaneously. In everyday vision, different information, such as object identity and location, appears simultaneously and interacts with each other. We tested the hypothesis that, in contextual cueing, when multiple regularities are present, the regularities that are most relevant to our behavioral goals would be prioritized. Previous studies of contextual cueing have commonly used the visual search paradigm. However, this paradigm is not suitable for directing participants' attention to a particular regularity. Therefore, we developed a new paradigm, the "spatiotemporal contextual cueing paradigm," and manipulated task-relevant and task-irrelevant regularities. In four experiments, we demonstrated that task-relevant regularities were more responsible for search facilitation than task-irrelevant regularities. This finding suggests our visual behavior is focused on regularities that are relevant to our current goal.

Relevance of the Mention of Antioxidant Properties in Yogurt Labels: In Vitro Evaluation and Chromatographic Analysis

Directory of Open Access Journals (Sweden)

Eliana Pereira

2013-06-01

Full Text Available The purpose of the inclusion of fruit (natural additives in yogurt aims to increase its antioxidant activity and functionality. Herein, a comparative study of the antioxidant potential of yogurts with pieces of various fruits was performed, including yogurts with mention of antioxidant properties in the label. Free radicals scavenging activity, reducing power and inhibition of lipid peroxidation were evaluated by in vitro assays, as were the contents in antioxidants such as phenolics, flavonoids, sugars and tocopherols. After analyzing thirteen yogurts containing fruit pieces and a natural one (control, the most interesting were yogurts with pieces of berries (for phenolics, flavonoids and 2,2-dipheny-1-picrylhydrazyl (DPPH scavenging activity, pineapple (for reducing power, blackberry (for β-carotene bleaching inhibition, blackberry “antioxidant” (for tocopherols and cherry (for sugars. The mention of “antioxidant” in the label was relevant for tocopherols, sugars, DPPH scavenging activity and reducing power. No synergisms were observed in yogurts prepared with pieces of different fruits. Nevertheless, the addition of fruit pieces to yogurt was favorable for antioxidant content, increasing the protection of the consumer against diseases related to oxidative stress.

Motivational Objects in Natural Scenes (MONS: A Database of >800 Objects

Directory of Open Access Journals (Sweden)

Judith Schomaker

2017-09-01

Full Text Available In daily life, we are surrounded by objects with pre-existing motivational associations. However, these are rarely controlled for in experiments with natural stimuli. Research on natural stimuli would therefore benefit from stimuli with well-defined motivational properties; in turn, such stimuli also open new paths in research on motivation. Here we introduce a database of Motivational Objects in Natural Scenes (MONS. The database consists of 107 scenes. Each scene contains 2 to 7 objects placed at approximately equal distance from the scene center. Each scene was photographed creating 3 versions, with one object (“critical object” being replaced to vary the overall motivational value of the scene (appetitive, aversive, and neutral, while maintaining high visual similarity between the three versions. Ratings on motivation, valence, arousal and recognizability were obtained using internet-based questionnaires. Since the main objective was to provide stimuli of well-defined motivational value, three motivation scales were used: (1 Desire to own the object; (2 Approach/Avoid; (3 Desire to interact with the object. Three sets of ratings were obtained in independent sets of observers: for all 805 objects presented on a neutral background, for 321 critical objects presented in their scene context, and for the entire scenes. On the basis of the motivational ratings, objects were subdivided into aversive, neutral, and appetitive categories. The MONS database will provide a standardized basis for future studies on motivational value under realistic conditions.

Some relevant properties of SO(n) representations for Grand unified theories

International Nuclear Information System (INIS)

Girardi, G.; Sorba, P.; Sciarrino, A.

1980-05-01

General properties of the SO(n) groups are examined, with emphasis on the usefulness of the Gel'fand-Zetlin basis for explicit calculations. The SO(n) representations containing a vector stabilized by subgroups of the type S[O(n-p) x O(p)], SU(k) x U(1) or SU(k) if n=2k, are characterized in view of selecting Higgs representations in SO(n) gauge models. Some useful properties of the SU(n) Gel'fand-Zetlin basis are given in the appendices

Why a Gunk World is Compatible with Nihilism about Objects

Directory of Open Access Journals (Sweden)

Baptiste Le Bihan

2015-07-01

Full Text Available Ted Sider argues that nihilism about objects is incompatible with the metaphysical possibility of gunk and takes this point to show that nihilism is flawed. I shall describe one kind of nihilism able to answer this objection. I believe that most of the things we usually encounter do not exist. That is, I take talk of macroscopic objects and macroscopic properties to refer to sets of fundamental properties, which are invoked as a matter of linguistic convention. This view is a kind of nihilism: it rules out the existence of objects; that is, from an ontological point of view, there are no objects. But unlike the moderate nihilism of Mark Heller, Peter van Inwagen and Trenton Merricks that claims that most objects do not exist, I endorse a radical nihilism according to which there are no objects in the world, but only properties instantiated in spacetime. As I will show, radical nihilism is perfectly compatible with the metaphysical possibility of gunk. It is also compatible with the epistemic possibility that we actually live in a gunk world. The objection raised by Ted Sider only applies to moderate nihilism that admits some objects in its ontology.

Improving Industry-Relevant Nuclear-Knowledge Development through Special Partnerships

International Nuclear Information System (INIS)

Cilliers, A.

2016-01-01

Full text: South African Network for Nuclear Education Science and Technology (SAN NEST) has the objective to develop the nuclear education system in South Africa to a point where suitably qualified and experienced nuclear personnel employed by nuclear science and technology programmes in South Africa are predominantly produced by the South African education system. This is done to strengthen the nuclear science and technology education programmes to better meet future demands in terms of quality, capacity and relevance. To ensure sustainable relevance, it is important to develop special partnerships with industry. This paper describes unique partnerships that were developed with nuclear industry partners. The success of these partnerships has ensured more industry partners to embrace the model which has proven to develop relevant knowledge, support research and provide innovative solutions for industry. (author

High throughtput comparisons and profiling of metagenomes for industrially relevant enzymes

KAUST Repository

Alam, Intikhab

2016-01-01

.g. temperature, environmental chemistry, etc… These metagenomes can be profiled to unearth enzymes relevant to several industries based on specific enzyme properties such as ability to work on extreme conditions, such as extreme temperatures, salinity

Multiple Level Crowding: Crowding at the Object Parts Level and at the Object Configural level.

Science.gov (United States)

Kimchi, Ruth; Pirkner, Yossef

2015-01-01

In crowding, identification of a peripheral target in the presence of nearby flankers is worse than when the target appears alone. Prevailing theories hold that crowding occurs because of integration or "pooling" of low-level features at a single, relatively early stage of visual processing. Recent studies suggest that crowding can occur also between high-level object representations. The most relevant findings come from studies with faces and may be specific to faces. We examined whether crowding can occur at the object configural level in addition to part-level crowding, using nonface objects. Target (a disconnected square or diamond made of four elements) identification was measured at varying eccentricities. The flankers were similar either to the target parts or to the target configuration. The results showed crowding in both cases: Flankers interfered with target identification such that identification accuracy decreased with an increase in eccentricity, and no interference was observed at the fovea. Crowding by object parts, however, was weaker and had smaller spatial extent than crowding by object configurations; we related this finding to the relationship between crowding and perceptual organization. These results provide strong evidence that crowding occurs not only between object parts but also between configural representations of objects. © The Author(s) 2015.

Age Differences in Selective Memory of Goal-Relevant Stimuli Under Threat.

Science.gov (United States)

Durbin, Kelly A; Clewett, David; Huang, Ringo; Mather, Mara

2018-02-01

When faced with threat, people often selectively focus on and remember the most pertinent information while simultaneously ignoring any irrelevant information. Filtering distractors under arousal requires inhibitory mechanisms, which take time to recruit and often decline in older age. Despite the adaptive nature of this ability, relatively little research has examined how both threat and time spent preparing these inhibitory mechanisms affect selective memory for goal-relevant information across the life span. In this study, 32 younger and 31 older adults were asked to encode task-relevant scenes, while ignoring transparent task-irrelevant objects superimposed onto them. Threat levels were increased on some trials by threatening participants with monetary deductions if they later forgot scenes that followed threat cues. We also varied the time between threat induction and a to-be-encoded scene (i.e., 2 s, 4 s, 6 s) to determine whether both threat and timing effects on memory selectivity differ by age. We found that age differences in memory selectivity only emerged after participants spent a long time (i.e., 6 s) preparing for selective encoding. Critically, this time-dependent age difference occurred under threatening, but not neutral, conditions. Under threat, longer preparation time led to enhanced memory for task-relevant scenes and greater memory suppression of task-irrelevant objects in younger adults. In contrast, increased preparation time after threat induction had no effect on older adults' scene memory and actually worsened memory suppression of task-irrelevant objects. These findings suggest that increased time to prepare top-down encoding processes benefits younger, but not older, adults' selective memory for goal-relevant information under threat. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

RESEARCH OF PROPERTIES KIESELGUHR AS OBJECT OF THERMAL REGENERATION

Directory of Open Access Journals (Sweden)

D. M. Vizir

2012-01-01

Full Text Available The physico-mechanical and thermophysical properties of diatomite аre investigated. The equations, allowing to define characteristics of diatomite in a wide range of temperature and humidity are received.

Luminance gradient at object borders communicates object location to the human oculomotor system.

Science.gov (United States)

Kilpeläinen, Markku; Georgeson, Mark A

2018-01-25

The locations of objects in our environment constitute arguably the most important piece of information our visual system must convey to facilitate successful visually guided behaviour. However, the relevant objects are usually not point-like and do not have one unique location attribute. Relatively little is known about how the visual system represents the location of such large objects as visual processing is, both on neural and perceptual level, highly edge dominated. In this study, human observers made saccades to the centres of luminance defined squares (width 4 deg), which appeared at random locations (8 deg eccentricity). The phase structure of the square was manipulated such that the points of maximum luminance gradient at the square's edges shifted from trial to trial. The average saccade endpoints of all subjects followed those shifts in remarkable quantitative agreement. Further experiments showed that the shifts were caused by the edge manipulations, not by changes in luminance structure near the centre of the square or outside the square. We conclude that the human visual system programs saccades to large luminance defined square objects based on edge locations derived from the points of maximum luminance gradients at the square's edges.

Rough multiple objective decision making

CERN Document Server

Xu, Jiuping

2011-01-01

Rough Set TheoryBasic concepts and properties of rough sets Rough Membership Rough Intervals Rough FunctionApplications of Rough SetsMultiple Objective Rough Decision Making Reverse Logistics Problem with Rough Interval Parameters MODM based Rough Approximation for Feasible RegionEVRMCCRMDCRM Reverse Logistics Network Design Problem of Suji Renewable Resource MarketBilevel Multiple Objective Rough Decision Making Hierarchical Supply Chain Planning Problem with Rough Interval Parameters Bilevel Decision Making ModelBL-EVRM BL-CCRMBL-DCRMApplication to Supply Chain Planning of Mianyang Co., LtdStochastic Multiple Objective Rough Decision Multi-Objective Resource-Constrained Project Scheduling UnderRough Random EnvironmentRandom Variable Stochastic EVRM Stochastic CCRM Stochastic DCRM Multi-Objective rc-PSP/mM/Ro-Ra for Longtan Hydropower StationFuzzy Multiple Objective Rough Decision Making Allocation Problem under Fuzzy Environment Fuzzy Variable Fu-EVRM Fu-CCRM Fu-DCRM Earth-Rock Work Allocation Problem.

Categorical data processing for real estate objects valuation using statistical analysis

Science.gov (United States)

Parygin, D. S.; Malikov, V. P.; Golubev, A. V.; Sadovnikova, N. P.; Petrova, T. M.; Finogeev, A. G.

2018-05-01

Theoretical and practical approaches to the use of statistical methods for studying various properties of infrastructure objects are analyzed in the paper. Methods of forecasting the value of objects are considered. A method for coding categorical variables describing properties of real estate objects is proposed. The analysis of the results of modeling the price of real estate objects using regression analysis and an algorithm based on a comparative approach is carried out.

Spontaneous Object Recognition Memory in Aged Rats: Complexity versus Similarity

Science.gov (United States)

Gamiz, Fernando; Gallo, Milagros

2012-01-01

Previous work on the effect of aging on spontaneous object recognition (SOR) memory tasks in rats has yielded controversial results. Although the results at long-retention intervals are consistent, conflicting results have been reported at shorter delays. We have assessed the potential relevance of the type of object used in the performance of…

Relevance of metric-free interactions in flocking phenomena.

Science.gov (United States)

Ginelli, Francesco; Chaté, Hugues

2010-10-15

We show that the collective properties of self-propelled particles aligning with their topological (Voronoi) neighbors are qualitatively different from those of usual models where metric interaction ranges are used. This relevance of metric-free interactions, shown in a minimal setting, indicate that realistic models for the cohesive motion of cells, bird flocks, and fish schools may have to incorporate them, as suggested by recent observations.

Predictive value of object relations for therapeutic alliance and outcome in psychotherapy for depression: an exploratory study

NARCIS (Netherlands)

Van, H.L.; Hendriksen, M.; Schoevers, R.A.; Peen, J.; Abraham, R.A.; Dekker, J.J.M.

2008-01-01

The concept of object relations has been shown to be relevant for the process and outcome of psychodynamic psychotherapies. However, little is known about its relevance for the psychotherapeutic treatment of depression. In this study, we explored the predictive value of object relational functioning

Credit assignment between body and object probed by an object transportation task.

Science.gov (United States)

Kong, Gaiqing; Zhou, Zhihao; Wang, Qining; Kording, Konrad; Wei, Kunlin

2017-10-17

It has been proposed that learning from movement errors involves a credit assignment problem: did I misestimate properties of the object or those of my body? For example, an overestimate of arm strength and an underestimate of the weight of a coffee cup can both lead to coffee spills. Though previous studies have found signs of simultaneous learning of the object and of the body during object manipulation, there is little behavioral evidence about their quantitative relation. Here we employed a novel weight-transportation task, in which participants lift the first cup filled with liquid while assessing their learning from errors. Specifically, we examined their transfer of learning when switching to a contralateral hand, the second identical cup, or switching both hands and cups. By comparing these transfer behaviors, we found that 25% of the learning was attributed to the object (simply because of the use of the same cup) and 58% of the learning was attributed to the body (simply because of the use of the same hand). The nervous system thus seems to partition the learning of object manipulation between the object and the body.

Deep learning relevance

DEFF Research Database (Denmark)

Lioma, Christina; Larsen, Birger; Petersen, Casper

2016-01-01

train a Recurrent Neural Network (RNN) on existing relevant information to that query. We then use the RNN to "deep learn" a single, synthetic, and we assume, relevant document for that query. We design a crowdsourcing experiment to assess how relevant the "deep learned" document is, compared...... to existing relevant documents. Users are shown a query and four wordclouds (of three existing relevant documents and our deep learned synthetic document). The synthetic document is ranked on average most relevant of all....

Bayesian object classification of gold nanoparticles

KAUST Repository

Konomi, Bledar A.

2013-06-01

The properties of materials synthesized with nanoparticles (NPs) are highly correlated to the sizes and shapes of the nanoparticles. The transmission electron microscopy (TEM) imaging technique can be used to measure the morphological characteristics of NPs, which can be simple circles or more complex irregular polygons with varying degrees of scales and sizes. A major difficulty in analyzing the TEM images is the overlapping of objects, having different morphological properties with no specific information about the number of objects present. Furthermore, the objects lying along the boundary render automated image analysis much more difficult. To overcome these challenges, we propose a Bayesian method based on the marked-point process representation of the objects. We derive models, both for the marks which parameterize the morphological aspects and the points which determine the location of the objects. The proposed model is an automatic image segmentation and classification procedure, which simultaneously detects the boundaries and classifies the NPs into one of the predetermined shape families. We execute the inference by sampling the posterior distribution using Markov chainMonte Carlo (MCMC) since the posterior is doubly intractable. We apply our novel method to several TEM imaging samples of gold NPs, producing the needed statistical characterization of their morphology. © Institute of Mathematical Statistics, 2013.

Bayesian object classification of gold nanoparticles

KAUST Repository

Konomi, Bledar A.; Dhavala, Soma S.; Huang, Jianhua Z.; Kundu, Subrata; Huitink, David; Liang, Hong; Ding, Yu; Mallick, Bani K.

2013-01-01

The properties of materials synthesized with nanoparticles (NPs) are highly correlated to the sizes and shapes of the nanoparticles. The transmission electron microscopy (TEM) imaging technique can be used to measure the morphological characteristics of NPs, which can be simple circles or more complex irregular polygons with varying degrees of scales and sizes. A major difficulty in analyzing the TEM images is the overlapping of objects, having different morphological properties with no specific information about the number of objects present. Furthermore, the objects lying along the boundary render automated image analysis much more difficult. To overcome these challenges, we propose a Bayesian method based on the marked-point process representation of the objects. We derive models, both for the marks which parameterize the morphological aspects and the points which determine the location of the objects. The proposed model is an automatic image segmentation and classification procedure, which simultaneously detects the boundaries and classifies the NPs into one of the predetermined shape families. We execute the inference by sampling the posterior distribution using Markov chainMonte Carlo (MCMC) since the posterior is doubly intractable. We apply our novel method to several TEM imaging samples of gold NPs, producing the needed statistical characterization of their morphology. © Institute of Mathematical Statistics, 2013.

Online decoding of object-based attention using real-time fMRI

NARCIS (Netherlands)

Niazi, A.M.; Broek, P.L.C. van den; Klanke, S.; Barth, M.; Poel, M.; Gerven, M.A.J. van

2014-01-01

Visual attention is used to selectively filter relevant information depending on current task demands and goals. Visual attention is called object-based attention when it is directed to coherent forms or objects in the visual field. This study used real-time functional magnetic resonance imaging for

Online decoding of object-based attention using real-time fMRI

NARCIS (Netherlands)

Niazi, Adnan M.; van den Broek, Philip L.C.; Klanke, Stefan; Barth, Markus; Poel, Mannes; Desain, Peter; van Gerven, Marcel A.J.

Visual attention is used to selectively filter relevant information depending on current task demands and goals. Visual attention is called object-based attention when it is directed to coherent forms or objects in the visual field. This study used real-time functional magnetic resonance imaging for

Reflections on rural people's knowledge and skill and relevance in ...

African Journals Online (AJOL)

UNLICENSED

objective is to assess the relevance of indigenous knowledge in agriculture. ... transmit the knowledge to the youths and researchers to document it and government to protect it. ... mechanisms to protect the earth's biological diversity. ... and other development agencies to embrace Agenda 21 as .... ecological characteristics.

Object representations in visual memory: evidence from visual illusions.

Science.gov (United States)

Ben-Shalom, Asaf; Ganel, Tzvi

2012-07-26

Human visual memory is considered to contain different levels of object representations. Representations in visual working memory (VWM) are thought to contain relatively elaborated information about object structure. Conversely, representations in iconic memory are thought to be more perceptual in nature. In four experiments, we tested the effects of two different categories of visual illusions on representations in VWM and in iconic memory. Unlike VWM that was affected by both types of illusions, iconic memory was immune to the effects of within-object contextual illusions and was affected only by illusions driven by between-objects contextual properties. These results show that iconic and visual working memory contain dissociable representations of object shape. These findings suggest that the global properties of the visual scene are processed prior to the processing of specific elements.

Herbig-Haro objects and T Tauri nebulae

International Nuclear Information System (INIS)

Boehm, K.H.

1975-01-01

The empirical information about Herbig-Haro objects and T Tauri nebulae is summarized. We emphasize especially the importance of the spectroscopic and spectrophotometric data. Relative and (preliminary) absolute emission line fluxes are presented and discussed. We consider the radial velocity data and the detection of a faint blue continuum in Herbig-Haro objects as important from a theoretical point of view. The direct interpretation of the emission line spectra is simple and leads to values of the electron temperature, electron density, density inhomogeneities, filling factors, degree of ionization and chemical abundances. The relevant procedures are discussed in some detail. The possible role of the Herbig-Haro objects in the early phases of stellar evolution is discussed. (orig./BJ) [de

TRAX - Real-World Tracking of Moving Objects

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard; Pakalnis, Stardas

2007-01-01

accuracy. This paper presents the TRAX tracking system that supports several techniques capable of tracking the current positions of moving objects with guaranteed accuracies at low update and communication costs in real-world settings. The techniques are readily relevant for practical applications......, but they also have implications for continued research. The tracking techniques offer a realistic setting for existing query processing techniques that assume that it is possible to always know the exact positions of moving objects. The techniques enable studies of trade-offs between querying and update...

Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Mohamed, Mohamed Ackiel [University Kuala Lumpur Malaysia France Institute, Bandar Baru Bangi (Malaysia); Manurung, Yupiter HP; Berhan, Mohamed Nor [Universiti Teknologi MARA, Shah Alam (Malaysia)

2015-06-15

This study presents the effect of the governing parameters in friction stir welding (FSW) on the mechanical properties and weld quality of a 6mm thick 6061 T651 Aluminum alloy butt joint. The main FSW parameters, the rotational and traverse speed were optimized based on multiple mechanical properties and quality features, which focus on the tensile strength, hardness and the weld quality class using the multi-objective Taguchi method (MTM). Multi signal to noise ratio (MSNR) was employed to determine the optimum welding parameters for MTM while further analysis concerning the significant level determination was accomplished via the well-established analysis of variance (ANOVA). Furthermore, the first order model for predicting the mechanical properties and weld quality class is derived by applying response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can effectively estimate the mechanical properties and weld quality class which can be used to enhance the welding performance in FSW or other applications.

Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology

International Nuclear Information System (INIS)

Mohamed, Mohamed Ackiel; Manurung, Yupiter HP; Berhan, Mohamed Nor

2015-01-01

This study presents the effect of the governing parameters in friction stir welding (FSW) on the mechanical properties and weld quality of a 6mm thick 6061 T651 Aluminum alloy butt joint. The main FSW parameters, the rotational and traverse speed were optimized based on multiple mechanical properties and quality features, which focus on the tensile strength, hardness and the weld quality class using the multi-objective Taguchi method (MTM). Multi signal to noise ratio (MSNR) was employed to determine the optimum welding parameters for MTM while further analysis concerning the significant level determination was accomplished via the well-established analysis of variance (ANOVA). Furthermore, the first order model for predicting the mechanical properties and weld quality class is derived by applying response surface methodology (RSM). Based on the experimental confirmation test, the proposed method can effectively estimate the mechanical properties and weld quality class which can be used to enhance the welding performance in FSW or other applications.

Exotic objects of atomic physics

Science.gov (United States)

Eletskii, A. V.

2017-11-01

There has been presented a short survey of physical properties, methods of production and exploration as well as directions of practical usage of the objects of atomic physics which are not yet described in detail in modern textbooks and manuals intended for students of technical universities. The family of these objects includes negative and multicharged ions, Rydberg atoms, excimer molecules, clusters. Besides of that, in recent decades this family was supplemented with new nanocarbon structures such as fullerenes, carbon nanotubes and graphene. The textbook “Exotic objects of atomic physics” [1] edited recently contains some information on the above-listed objects of the atomic physics. This textbook can be considered as a supplement to classic courses of atomic physics teaching in technical universities.

Morphology and Optical Properties of Black-Carbon Particles Relevant to Engine Emissions

Science.gov (United States)

Michelsen, H. A.; Bambha, R.; Dansson, M. A.; Schrader, P. E.

2013-12-01

Black-carbon particles are believed to have a large influence on climate through direct radiative forcing, reduction of surface albedo of snow and ice in the cryosphere, and interaction with clouds. The optical properties and morphology of atmospheric particles containing black carbon are uncertain, and characterization of black carbon resulting from engines emissions is needed. Refractory black-carbon particles found in the atmosphere are often coated with unburned fuel, sulfuric acid, water, ash, and other combustion by-products and atmospheric constituents. Coatings can alter the optical and physical properties of the particles and therefore change their optical properties and cloud interactions. Details of particle morphology and coating state can also have important effects on the interpretation of optical diagnostics. A more complete understanding of how coatings affect extinction, absorption, and incandescence measurements is needed before these techniques can be applied reliably to a wide range of particles. We have investigated the effects of coatings on the optical and physical properties of combustion-generated black-carbon particles using a range of standard particle diagnostics, extinction, and time-resolved laser-induced incandescence (LII) measurements. Particles were generated in a co-flow diffusion flame, extracted, cooled, and coated with oleic acid. The diffusion flame produces highly dendritic soot aggregates with similar properties to those produced in diesel engines, diffusion flames, and most natural combustion processes. A thermodenuder was used to remove the coating. A scanning mobility particle sizer (SMPS) was used to monitor aggregate sizes; a centrifugal particle mass analyzer (CPMA) was used to measure coating mass fractions, and transmission electron microscopy (TEM) was used to characterize particle morphologies. The results demonstrate important differences in optical measurements between coated and uncoated particles.

Characterization of load dependent creep behavior in medically relevant absorbable polymers.

Science.gov (United States)

Dreher, Maureen L; Nagaraja, Srinidhi; Bui, Hieu; Hong, Danny

2014-01-01

While synthetic absorbable polymers have a substantial history of use in medical devices, their use is expanding and becoming more prevalent for devices where long term loading and structural support is required. In addition, there is evidence that current absorbable medical devices may experience permanent deformations, warping (out of plane twisting), and geometric changes in vivo. For clinical indications with long term loading or structural support requirements, understanding the material's viscoelastic properties becomes increasingly important whereas these properties have not been used historically as preclinical indications of performance or design considerations. In this study we measured the static creep, creep recovery and cyclic creep responses of common medically relevant absorbable materials (i.e., poly(l-lactide, PLLA) and poly(l-co-glycolide, PLGA) over a range of physiologically relevant loading magnitudes. The results indicate that both PLLA and PLGA exhibit creep behavior and failure at loads significantly less than the yield or ultimate properties of the material and that significant material specific responses to loading exist. In addition, we identified a strong correlation between the extent of creep in the material and its crystallinity. Results of the study provide new information on the creep behavior of PLLA and PLGA and support the use of viscoelastic properties of absorbable polymers as part of the material selection process. © 2013 Published by Elsevier Ltd.

The Question of the Legal Nature and Status of Real Estate Objects for Religious Purposes

Directory of Open Access Journals (Sweden)

Roman V. Tupikin

2016-12-01

ABSTRACT: The article is devoted to research of the texts of foreign laws, regulations, and concordats on property relations between the state and religious institutions, on property rights of religious institutions and property relations in religious institutions (regarding property objects for religious purposes, on the status of some property objects for religious purposes. The author of the research analyzed the features of legal and contractual regulation of property relations of religious institutions and the status of property objects for religious purposes. The methodological foundation of the research presented has comparative and legal research method as the basis.

Object attributes combine additively in visual search

OpenAIRE

Pramod, R. T.; Arun, S. P.

2016-01-01

We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in in...

Object oriented distributed programming: studies and proposals

International Nuclear Information System (INIS)

Guerraoui, Rachid

1992-01-01

This thesis contributes to the investigation of the object concept in distributed programming. Henceforth, this programming style has become a reality in the computer science world, since it allows to increase of the availability of applications and to decrease their execution time. Nevertheless, designing a distributed application is a hard task: the various abstraction levels that must be considered hinder the software reusability and maintenance, while errors and concurrent accesses are often sources of executions incoherence. The object concept improves the software modularity, and raises the computing abstraction level. Integrating distribution related aspects into the object model brings up the issues of expressing the concurrency and maintaining the coherency. The investigation of these problems in this thesis has been guided by a major concern for the preservation of the intrinsic properties of object-orientation, and the orthogonality of the solutions given. The main contributions of the thesis are: (i) the classification, regarding modularity, of the different design alternatives for object-oriented concurrent languages; (ii) the evaluation of various transactional mechanisms in object-based concurrent languages, and the design of an atomic asynchronous communication protocol named ACS; (iii) the definition of a transaction-based object-oriented concurrent language called KAROS; (iv) the implementation of a modular framework which allows to combine in a same application, various concurrency control and error recovery mechanisms; (v) the identification of a formal property, named general atomicity, which constitutes a correctness criteria for atomic objects specifications. (author) [fr

Relevance of a subjective quality of life questionnaire for long-term homeless persons with schizophrenia.

Science.gov (United States)

Girard, V; Tinland, A; Bonin, J P; Olive, F; Poule, J; Lancon, C; Apostolidis, T; Rowe, M; Greacen, T; Simeoni, M C

2017-02-17

Increasing numbers of programs are addressing the specific needs of homeless people with schizophrenia in terms of access to housing, healthcare, basic human rights and other domains. Although quality of life scales are being used to evaluate such programs, few instruments have been validated for people with schizophrenia and none for people with schizophrenia who experience major social problems such as homelessness. The aim of the present study was to validate the French version of the S-QoL a self-administered, subjective quality of life questionnaire specific to schizophrenia for people with schizophrenia who are homeless. In a two-step process, the S-QoL was first administered to two independent convenience samples of long-term homeless people with schizophrenia in Marseille, France. The objective of the first step was to analyse the psychometric properties of the S-QoL. The objective of the second step was to examine, through qualitative interviews with members of the population in question, the relevance and acceptability of the principle quality of life indicators used in the S-QoL instrument. Although the psychometric characteristics of the S-QoL were found to be globally satisfactory, from the point of view of the people being interviewed, acceptability was poor. Respondents frequently interrupted participation complaining that questionnaire items did not take into account the specific context of life on the streets. Less intrusive questions, more readily understandable vocabulary and greater relevance to subjects' living conditions are needed to improve the S-QoL questionnaire for this population. A modular questionnaire with context specific sections or specific quality of life instruments for socially excluded populations may well be the way forward.

Southeast Atlantic Cloud Properties in a Multivariate Statistical Model - How Relevant is Air Mass History for Local Cloud Properties?

Science.gov (United States)

Fuchs, Julia; Cermak, Jan; Andersen, Hendrik

2017-04-01

This study aims at untangling the impacts of external dynamics and local conditions on cloud properties in the Southeast Atlantic (SEA) by combining satellite and reanalysis data using multivariate statistics. The understanding of clouds and their determinants at different scales is important for constraining the Earth's radiative budget, and thus prominent in climate-system research. In this study, SEA stratocumulus cloud properties are observed not only as the result of local environmental conditions but also as affected by external dynamics and spatial origins of air masses entering the study area. In order to assess to what extent cloud properties are impacted by aerosol concentration, air mass history, and meteorology, a multivariate approach is conducted using satellite observations of aerosol and cloud properties (MODIS, SEVIRI), information on aerosol species composition (MACC) and meteorological context (ERA-Interim reanalysis). To account for the often-neglected but important role of air mass origin, information on air mass history based on HYSPLIT modeling is included in the statistical model. This multivariate approach is intended to lead to a better understanding of the physical processes behind observed stratocumulus cloud properties in the SEA.

The Electrical and Optical Properties of Organometal Halide Perovskites Relevant to Optoelectronic Performance

KAUST Repository

Adinolfi, Valerio

2017-10-12

Organometal halide perovskites are under intense study for use in optoelectronics. Methylammonium and formamidinium lead iodide show impressive performance as photovoltaic materials; a premise that has spurred investigations into light-emitting devices and photodetectors. Herein, the optical and electrical material properties of organometal halide perovskites are reviewed. An overview is given on how the material composition and morphology are tied to these properties, and how these properties ultimately affect device performance. Material attributes and techniques used to estimate them are analyzed for different perovskite materials, with a particular focus on the bandgap, mobility, diffusion length, carrier lifetime, and trap-state density.

Abnormal dynamics of activation of object use information in apraxia: evidence from eyetracking

Science.gov (United States)

Lee, Chia-lin; Mirman, Daniel; Buxbaum, Laurel J.

2014-01-01

Action representations associated with object use may be incidentally activated during visual object processing, and the time course of such activations may be influenced by lexical-semantic context (e.g., Lee, Middleton, Mirman, Kalénine, & Buxbaum, 2012). In this study we used the “visual world” eye-tracking paradigm to examine whether a deficit in producing skilled object-use actions (apraxia) is associated with abnormalities in incidental activation of action information, and assessed the neuroanatomical substrates of any such deficits. Twenty left hemisphere stroke patients, ten of whom were apraxic, performed a task requiring identification of a named object in a visual display containing manipulation-related and unrelated distractor objects. Manipulation relationships among objects were not relevant to the identification task. Objects were cued with neutral (“S/he saw the….”), or action-relevant (“S/he used the….”) sentences. Non-apraxic participants looked at use-related non-target objects significantly more than at unrelated non-target objects when cued both by neutral and action-relevant sentences, indicating that action information is incidentally activated. In contrast, apraxic participants showed delayed activation of manipulation-based action information during object identification when cued by neutral sentences. The magnitude of delayed activation in the neutral sentence condition was reliably predicted by lower scores on a test of gesture production to viewed objects, as well as by lesion loci in the inferior parietal and posterior temporal lobes. However, when cued by a sentence containing an action verb, apraxic participants showed fixation patterns that were statistically indistinguishable from non-apraxic controls. In support of grounded theories of cognition, these results suggest that apraxia and temporal-parietal lesions may be associated with abnormalities in incidental activation of action information from objects. Further

Spatiotemporal dynamics in understanding hand—object interactions

Science.gov (United States)

Avanzini, Pietro; Fabbri-Destro, Maddalena; Campi, Cristina; Pascarella, Annalisa; Barchiesi, Guido; Cattaneo, Luigi; Rizzolatti, Giacomo

2013-01-01

It is generally accepted that visual perception results from the activation of a feed-forward hierarchy of areas, leading to increasingly complex representations. Here we present evidence for a fundamental role of backward projections to the occipito-temporal region for understanding conceptual object properties. The evidence is based on two studies. In the first study, using high-density EEG, we showed that during the observation of how objects are used there is an early activation of occipital and temporal areas, subsequently reaching the pole of the temporal lobe, and a late reactivation of the visual areas. In the second study, using transcranial magnetic stimulation over the occipital lobe, we showed a clear impairment in the accuracy of recognition of how objects are used during both early activation and, most importantly, late occipital reactivation. These findings represent strong neurophysiological evidence that a top-down mechanism is fundamental for understanding conceptual object properties, and suggest that a similar mechanism might be also present for other higher-order cognitive functions. PMID:24043805

COLOR INFLUENCES IDENTIFICATION OF THE MOVING OBJECTS MORE THAN SHAPE

Directory of Open Access Journals (Sweden)

Suncica Zdravkovic

2009-02-01

Full Text Available When people track moving objects, they concentrate on different characteristics.Recent results show that people more often concentrate on spatiotemporalthan featural properties of the objects. In other words, location and directionof motion seem to be more informative properties than the stable featuralcharacteristics. This finding contradicts some of our knowledge about cognitivesystem. Current research was done in attempt to specify the effect of featuralcharacteristics, especially color and shape. In Experiment 1, subjects were askedto track four mobile targets presented with another four moving objects. Afterthe motion has stopped, they had to mark the initial four targets. Our resultshave shown that participants pay more attention to the featural properties thanto spatiotemporal characteristics. Since our task was more difficult than thetasks typically reported in the literature, the results might be interpreted as if thesubjects relied mostly on attentional processes. The task in Experiment 2 wasmade even more difficult: the subjects were asked to direct attention on identityof every target. Consequently, the task demanded more complex cognitiveprocesses and emphasizing effects of featural properties. Results suggest thatcolor and shape does not have the same influences on multiple object tracking,but that color has more significant effect.

Evaluation of thermo-mechanical properties data of carbon-based plasma facing materials

International Nuclear Information System (INIS)

Ulrickson, M.; Barabash, V.R.; Matera, R.; Roedig, M.; Smith, J.J.; Janev, R.K.

1991-03-01

This Report contains the proceedings, results and conclusions of the work done and the analysis performed during the IAEA Consultants' Meeting on ''Evaluation of thermo-mechanical properties data of carbon-based plasma facing materials'', convened on December 17-21, 1990, at the IAEA Headquarters in Vienna. Although the prime objective of the meeting was to critically assess the available thermo-mechanical properties data for certain types of carbon-based fusion relevant materials, the work of the meeting went well beyond this task. The meeting participants discussed in depth the scope and structure of the IAEA material properties database, the format of data presentation, the most appropriate computerized system for data storage, retrieval, exchange and management. The existing IAEA ALADDIN system was adopted as a convenient tool for this purpose and specific ALADDIN labelling schemes and dictionaries were established for the material properties data. An ALADDIN formatted test-file for the thermo-physical and thermo-mechanical properties of pyrolytic graphite is appended to this Report for illustrative purposes. (author)

Extragalactic active objects in the radio and infrared bands

Energy Technology Data Exchange (ETDEWEB)

Sikora, M [Polska Akademia Nauk, Warsaw. Centrum Astronomiczne

1981-01-01

This paper is the second in a series of papers concerning extragalactic active objects. We discuss the properties of Seyfert's galaxies, radiogalaxies, quasars and BL Lacertae objects in the radio and infrared bands.

Objective Academic Achievement and Subjective Personal Well-Being

Science.gov (United States)

McDonald, Betty

2012-01-01

This paper examines the relationship between objective academic achievement (OAA) and subjective well-being (SWB). Using a sample of 515 adolescents from ten different high schools across a small country, semi-structured interviews, academic records and observations provided relevant data for the study. OAA was measured from examination results…

A principled and cosmopolitan neuroethics: considerations for international relevance

OpenAIRE

Shook, John R; Giordano, James

2014-01-01

Neuroethics applies cognitive neuroscience for prescribing alterations to conceptions of self and society, and for prescriptively judging the ethical applications of neurotechnologies. Plentiful normative premises are available to ground such prescriptivity, however prescriptive neuroethics may remain fragmented by social conventions, cultural ideologies, and ethical theories. Herein we offer that an objectively principled neuroethics for international relevance requires a new meta-ethics: un...

An Integrated Account of Generalization across Objects and Features

Science.gov (United States)

Kemp, Charles; Shafto, Patrick; Tenenbaum, Joshua B.

2012-01-01

Humans routinely make inductive generalizations about unobserved features of objects. Previous accounts of inductive reasoning often focus on inferences about a single object or feature: accounts of causal reasoning often focus on a single object with one or more unobserved features, and accounts of property induction often focus on a single…

Automatic processing of unattended object features by functional connectivity

Directory of Open Access Journals (Sweden)

Katja Martina Mayer

2013-05-01

Full Text Available Observers can selectively attend to object features that are relevant for a task. However, unattended task-irrelevant features may still be processed and possibly integrated with the attended features. This study investigated the neural mechanisms for processing both task-relevant (attended and task-irrelevant (unattended object features. The Garner paradigm was adapted for functional magnetic resonance imaging (fMRI to test whether specific brain areas process the conjunction of features or whether multiple interacting areas are involved in this form of feature integration. Observers attended to shape, colour, or non-rigid motion of novel objects while unattended features changed from trial to trial (change blocks or remained constant (no-change blocks during a given block. This block manipulation allowed us to measure the extent to which unattended features affected neural responses which would reflect the extent to which multiple object features are automatically processed. We did not find Garner interference at the behavioural level. However, we designed the experiment to equate performance across block types so that any fMRI results could not be due solely to differences in task difficulty between change and no-change blocks. Attention to specific features localised several areas known to be involved in object processing. No area showed larger responses on change blocks compared to no-change blocks. However, psychophysiological interaction analyses revealed that several functionally-localised areas showed significant positive interactions with areas in occipito-temporal and frontal areas that depended on block type. Overall, these findings suggest that both regional responses and functional connectivity are crucial for processing multi-featured objects.

Other relevant papers in physical oceanography

International Nuclear Information System (INIS)

Nyffeler, F.

1989-01-01

During the past few years, significant progress has occurred in the field of physical oceanography partly as a consequence of developing cooperation and international participation in well-coordinated ocean research programmes. Although these programs were not designed specifically to address CRESP problems, many have proved to be directly relevant to CRESP objectives. For example, MODE, POLYMODE, and Tourbillon were intensive site-specific experiments that included studies of dispersion processes throughout the water column. NOAMP and GME were also site specific, involved the entire water column, and even stressed near-bottom and suspended-sediment processes. Others, (e.g., WOCE) are larger in scope and include extensive observations of the general circulation of entire ocean basins. As a whole, they contribute immensely to improving the data base for exchange and transport processes and thereby for the verification and validation of both regional-scale and general-circulation ocean models. That, in turn, is directly relevant to radiological assessments. Selected papers deriving from experiments such as these are discussed and referenced below

The foundations of object permanence: does perceived cohesion determine infants' appreciation of the continuous existence of material objects?

Science.gov (United States)

Cacchione, Trix

2013-09-01

One of the most fundamental achievements in infants' cognitive development is their appreciation that material objects exist permanently in space and time. Recent findings suggest that infants fail to identify fragmented material objects as continuously existing items. Four experiments assessed 8-12-month-old infants' ability to further represent an object that was fragmented into two or more parts. Results suggest that infants successfully trace the spatiotemporal displacement of fragmented objects, but that their processing of size/quantity-related property information may be affected. This suggests that, contrary to recent claims, 8- to 12-month-old infants can and do appreciate the continuity of fragmented objects. Copyright © 2013 Elsevier B.V. All rights reserved.

Photogrammetric Measurements of Heritage Objects

Science.gov (United States)

Tumeliene, E.; Nareiko, V.; Suziedelyte Visockiene, J.

2017-12-01

Cultural heritage is an invaluable example of human culture and creativity. The majority of them can become unstable or can be destroyed due to a combination of human and natural disturbances. In order to restore, preserve, and systematize data about architectural heritage objects, it is necessary to have geodetic, photogrammetric measurements of such data and to constantly monitor condition of the objects. The data of immovable cultural objects for many years are stored in photogrammetric data archives. Such archives have Germany, Lithuania, England and other countries. The article gives a brief introduction of the history of data archives formation and presents a photogrammetric and modern methods of modelling the spatial geometric properties of objects currently used to reveal immovable cultural properties and to evaluate geometric sizes. The pilot work was done with the Concept Capture simulation program that was developed by the Bentley company with photos of the Blessed Virgin Mary painting in Pivašiūnai of Trakai district. A shot from the ground with 12.4 MP resolution Pentax K-x camera was done using lenses with different focal lengths. The painting of the Blessed Virgin Mary is coordinated by 4 reference geodesic points and therefore after the modelling work it was possible to evaluate the accuracy of the created model. Based on the results of the spatial (3D) model, photo shooting and modelling recommendations are presented, the advantages of the new technology are distinguished.

Relevance Evaluation of Engineering Master's Program in Peru

OpenAIRE

Miñán, Erick; Lavalle, Carlos; Díaz-Puente, José M.

2012-01-01

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Comp...

Effect of sterilization procedures on properties of plasma polymers relevant to biomedical applications

International Nuclear Information System (INIS)

Artemenko, A.; Kylián, O.; Choukourov, A.; Gordeev, I.; Petr, M.; Vandrovcová, M.; Polonskyi, O.; Bačáková, L.; Slavinska, D.; Biederman, H.

2012-01-01

This study is focused on the evaluation of resistance of plasma polymers toward common sterilization techniques, i.e. property important for possible use of such materials in biomedical applications. Three kinds of plasma polymers having different bioadhesive natures were studied: plasma polymerized poly(ethylene oxide), fluorocarbon plasma polymers, and nitrogen-rich plasma polymers. These plasma polymers were subjected to dry heat, autoclave and UV radiation treatment. Their physical, chemical and bioresponsive properties were determined by means of different techniques (ellipsometry, atomic force microscopy, wettability measurements, X-ray photoelectron spectroscopy and biological tests with osteoblast-like cells MG63). The results clearly show that properties of thin films of plasma polymers may be significantly altered by a sterilization process. Moreover, observed changes induced by selected sterilization methods were found to depend strongly on the sterilized plasma polymer. - Highlights: ► Effect of common sterilization methods on three kinds of plasma polymers is studied. ► Physical, chemical and bioresponsive properties of plasma polymers are analyzed. ► Changes induced by sterilization depend strongly on type of the plasma polymer.

TACTILE SENSING FOR OBJECT IDENTIFICATION

DEFF Research Database (Denmark)

Drimus, Alin; Marian, Nicolae; Bilberg, Arne

2009-01-01

The artificial sense of touch is a research area that can be considered still in demand, compared with the human dexterity of grasping a wide variety of shapes and sizes, perform complex tasks, and switch between grasps in response to changing task requirements. For handling unknown objects...... in unstructured environments, tactile sensing can provide more than valuable to complementary vision information about mechanical properties such as recognition and characterization, force, pressure, torque, compliance, friction, and mass as well as object shape, texture, position and pose. In this paper, we...

EOG feature relevance determination for microsleep detection

Directory of Open Access Journals (Sweden)

Golz Martin

2017-09-01

Full Text Available Automatic relevance determination (ARD was applied to two-channel EOG recordings for microsleep event (MSE recognition. 10 s immediately before MSE and also before counterexamples of fatigued, but attentive driving were analysed. Two type of signal features were extracted: the maximum cross correlation (MaxCC and logarithmic power spectral densities (PSD averaged in spectral bands of 0.5 Hz width ranging between 0 and 8 Hz. Generalised learn-ing vector quantisation (GRLVQ was used as ARD method to show the potential of feature reduction. This is compared to support-vector machines (SVM, in which the feature reduction plays a much smaller role. Cross validation yielded mean normalised relevancies of PSD features in the range of 1.6 – 4.9 % and 1.9 – 10.4 % for horizontal and vertical EOG, respectively. MaxCC relevancies were 0.002 – 0.006 % and 0.002 – 0.06 %, respectively. This shows that PSD features of vertical EOG are indispensable, whereas MaxCC can be neglected. Mean classification accuracies were estimated at 86.6±b 1.3 % and 92.3±b 0.2 % for GRLVQ and SVM, respectively. GRLVQ permits objective feature reduction by inclusion of all processing stages, but is not as accurate as SVM.

EOG feature relevance determination for microsleep detection

Directory of Open Access Journals (Sweden)

Golz Martin

2017-09-01

Full Text Available Automatic relevance determination (ARD was applied to two-channel EOG recordings for microsleep event (MSE recognition. 10 s immediately before MSE and also before counterexamples of fatigued, but attentive driving were analysed. Two type of signal features were extracted: the maximum cross correlation (MaxCC and logarithmic power spectral densities (PSD averaged in spectral bands of 0.5 Hz width ranging between 0 and 8 Hz. Generalised learn-ing vector quantisation (GRLVQ was used as ARD method to show the potential of feature reduction. This is compared to support-vector machines (SVM, in which the feature reduction plays a much smaller role. Cross validation yielded mean normalised relevancies of PSD features in the range of 1.6 - 4.9 % and 1.9 - 10.4 % for horizontal and vertical EOG, respectively. MaxCC relevancies were 0.002 - 0.006 % and 0.002 - 0.06 %, respectively. This shows that PSD features of vertical EOG are indispensable, whereas MaxCC can be neglected. Mean classification accuracies were estimated at 86.6±b 1.3 % and 92.3±b 0.2 % for GRLVQ and SVM, respec-tively. GRLVQ permits objective feature reduction by inclu-sion of all processing stages, but is not as accurate as SVM.

Detection of foreign objects using bobbin probe eddy current test

Energy Technology Data Exchange (ETDEWEB)

Jung, Hee Sung; Kweon, Young Ho; Lee, Dong Ha; Shin, Wook Jo; Yim, Chan Ki [ECT Group, Sae-An Engineering Corporation, Seoul (Korea, Republic of)

2016-08-15

Residual foreign objects at the secondary side (top of the tubesheet and tube support plates) of a steam generator are likely to cause a leak by causing wear in the tube. The extent of wear is significantly affected by the material, shape, and size of the foreign object, and the corrosion properties of the tube. The presence of foreign objects at the top of the tubesheet and tube support plates has been identified using remote visual inspection methods such as the foreign object search and retrieval and eddy current test (ECT). The detection of the residual foreign object at the secondary side of a steam generator has limitations that depend on the material properties and the condition of contact with the tube. In this study, which is vertical and horizontal from the upper tubesheet, the corresponding bobbin ECT signals were collected and analyzed to measure its ability to detect foreign objects.

PROPERTIES OF THE MOLECULAR CORES OF LOW LUMINOSITY OBJECTS

Energy Technology Data Exchange (ETDEWEB)

Hsieh, Tien-Hao; Lai, Shih-Ping [Institute of Astronomy, National Tsing Hua University (NTHU), Hsinchu 30013, Taiwan (China); Belloche, Arnaud; Wyrowski, Friedrich [Max-Planck-Institut für Radioastronomie (MPIfR), Bonn (Germany); Hung, Chao-Ling, E-mail: slai@phys.nthu.edu.tw, E-mail: shawinchone@gmail.com [Institute for Astronomy, University of Hawaii, Honolulu, HI 96822 (United States)

2015-04-01

We present a survey toward 16 low luminosity objects (LLOs with an internal luminosity, L{sub int}, lower than 0.2 L{sub ⊙}) with N{sub 2}H{sup +} (1–0), N{sub 2}H{sup +} (3–2), N{sub 2}D{sup +} (3–2), HCO{sup +} (3–2), and HCN (3–2) using the Arizona Radio Observatory Kitt Peak 12 m Telescope and Submillimeter Telescope. Our goal is to probe the nature of these faint protostars which are believed to be either very low mass or extremely young protostars. We find that the N{sub 2}D{sup +}/N{sub 2}H{sup +} column density ratios of LLOs are similar to those of typical starless cores and Class 0 objects. The N{sub 2}D{sup +}/N{sub 2}H{sup +} column density ratios are relatively high (>0.05) for LLOs with kinetic temperatures less than 10 K in our sample. The distribution of N{sub 2}H{sup +} (1–0) line widths spreads between that of starless cores and young Class 0 objects. If we use the line width as a dynamic evolutionary indicator, LLOs are likely young Class 0 protostellar sources. We further use the optically thick tracers, HCO{sup +} (3–2) and HCN (3–2), to probe the infall signatures of our targets. We derive the asymmetry parameters from both lines and estimate the infall velocities by fitting the HCO{sup +} (3–2) spectra with two-layer models. As a result, we identify eight infall candidates based on the infall velocities and seven candidates have infall signatures supported by asymmetry parameters from at least one of HCO{sup +} (3–2) and HCN (3–2)

Industrial relevance of thermophilic Archaea.

Science.gov (United States)

Egorova, Ksenia; Antranikian, Garabed

2005-12-01

The dramatic increase of newly isolated extremophilic microorganisms, analysis of their genomes and investigations of their enzymes by academic and industrial laboratories demonstrate the great potential of extremophiles in industrial (white) biotechnology. Enzymes derived from extremophiles (extremozymes) are superior to the traditional catalysts because they can perform industrial processes even under harsh conditions, under which conventional proteins are completely denatured. In particular, enzymes from thermophilic and hyperthermophilic Archaea have industrial relevance. Despite intensive investigations, our knowledge of the structure-function relationships of their enzymes is still limited. Information concerning the molecular properties of their enzymes and genes has to be obtained to be able to understand the mechanisms that are responsible for catalytic activity and stability at the boiling point of water.

The ultrastructure of bone and its relevance to mechanical properties

Science.gov (United States)

Schwarcz, Henry P.; Abueidda, Diab; Jasiuk, Iwona

2017-09-01

Bone is a biologically generated composite material comprised of two major structural components: crystals of apatite and collagen fibrils. Computational analysis of the mechanical properties of bone must make assumptions about the geometric and topological relationships between these components. Recent transmission electron microscope (TEM) studies of samples of bone prepared using ion milling methods have revealed important previously unrecognized features in the ultrastructure of bone. These studies show that most of the mineral in bone lies outside the fibrils and is organized into elongated plates 5 nanometers (nm) thick, 80 nm wide and hundreds of nm long. These so-called mineral lamellae (MLs) are mosaics of single 5 nm-thick, 20 - 50 nm wide crystals bonded at their edges. MLs occur either stacked around the 50 nm-diameter collagen fibrils, or in parallel stacks of 5 or more MLs situated between fibrils. About 20% of mineral is in gap zones within the fibrils. MLs are apparently glued together into mechanically coherent stacks which break across the stack rather than delaminating. ML stacks should behave as cohesive units during bone deformation. Finite element computations of mechanical properties of bone show that the model including such features generates greater stiffness and strength than are obtained using conventional models in which most of the mineral, in the form of isolated crystals, is situated inside collagen fibrils.

Effect of sterilization procedures on properties of plasma polymers relevant to biomedical applications

Energy Technology Data Exchange (ETDEWEB)

Artemenko, A. [Charles University in Prague, Faculty of Mathematics and Physics, Department of Macromolecular Physics, V Holesovickach 2, 180 00 Prague (Czech Republic); Kylian, O., E-mail: ondrej.kylian@gmail.com [Charles University in Prague, Faculty of Mathematics and Physics, Department of Macromolecular Physics, V Holesovickach 2, 180 00 Prague (Czech Republic); Choukourov, A.; Gordeev, I.; Petr, M. [Charles University in Prague, Faculty of Mathematics and Physics, Department of Macromolecular Physics, V Holesovickach 2, 180 00 Prague (Czech Republic); Vandrovcova, M. [Institute of Physiology, Academy of Sciences of the Czech Republic, Department of Growth and Differentiation of Cell Populations, Videnska 1083, 142 20, Prague 4 (Czech Republic); Polonskyi, O. [Charles University in Prague, Faculty of Mathematics and Physics, Department of Macromolecular Physics, V Holesovickach 2, 180 00 Prague (Czech Republic); Bacakova, L. [Institute of Physiology, Academy of Sciences of the Czech Republic, Department of Growth and Differentiation of Cell Populations, Videnska 1083, 142 20, Prague 4 (Czech Republic); Slavinska, D.; Biederman, H. [Charles University in Prague, Faculty of Mathematics and Physics, Department of Macromolecular Physics, V Holesovickach 2, 180 00 Prague (Czech Republic)

2012-10-01

This study is focused on the evaluation of resistance of plasma polymers toward common sterilization techniques, i.e. property important for possible use of such materials in biomedical applications. Three kinds of plasma polymers having different bioadhesive natures were studied: plasma polymerized poly(ethylene oxide), fluorocarbon plasma polymers, and nitrogen-rich plasma polymers. These plasma polymers were subjected to dry heat, autoclave and UV radiation treatment. Their physical, chemical and bioresponsive properties were determined by means of different techniques (ellipsometry, atomic force microscopy, wettability measurements, X-ray photoelectron spectroscopy and biological tests with osteoblast-like cells MG63). The results clearly show that properties of thin films of plasma polymers may be significantly altered by a sterilization process. Moreover, observed changes induced by selected sterilization methods were found to depend strongly on the sterilized plasma polymer. - Highlights: Black-Right-Pointing-Pointer Effect of common sterilization methods on three kinds of plasma polymers is studied. Black-Right-Pointing-Pointer Physical, chemical and bioresponsive properties of plasma polymers are analyzed. Black-Right-Pointing-Pointer Changes induced by sterilization depend strongly on type of the plasma polymer.

Popularity and user diversity of online objects

Science.gov (United States)

Wang, Jia-Hua; Guo, Qiang; Yang, Kai; Zhang, Yi-Lu; Han, Jingti; Liu, Jian-Guo

2016-11-01

The popularity has been widely used to describe the object property of online user-object bipartite networks regardless of the user characteristics. In this paper, we introduce a measurement namely user diversity to measure diversity of users who select or rate one type of objects by using the information entropy. We empirically calculate the user diversity of objects with specific degree for both MovieLens and Diggs data sets. The results indicate that more types of users select normal-degree objects than those who select large-degree and small-degree objects. Furthermore, small-degree objects are usually selected by large-degree users while large-degree objects are usually selected by small-degree users. Moreover, we define 15% objects of smallest degrees as unpopular objects and 10% ones of largest degrees as popular objects. The timestamp is introduced to help further analyze the evolution of user diversity of popular objects and unpopular objects. The dynamic analysis shows that as objects become popular gradually, they are more likely accepted by small-degree users but lose attention among the large-degree users.

Manifold-Based Visual Object Counting.

Science.gov (United States)

Wang, Yi; Zou, Yuexian; Wang, Wenwu

2018-07-01

Visual object counting (VOC) is an emerging area in computer vision which aims to estimate the number of objects of interest in a given image or video. Recently, object density based estimation method is shown to be promising for object counting as well as rough instance localization. However, the performance of this method tends to degrade when dealing with new objects and scenes. To address this limitation, we propose a manifold-based method for visual object counting (M-VOC), based on the manifold assumption that similar image patches share similar object densities. Firstly, the local geometry of a given image patch is represented linearly by its neighbors using a predefined patch training set, and the object density of this given image patch is reconstructed by preserving the local geometry using locally linear embedding. To improve the characterization of local geometry, additional constraints such as sparsity and non-negativity are also considered via regularization, nonlinear mapping, and kernel trick. Compared with the state-of-the-art VOC methods, our proposed M-VOC methods achieve competitive performance on seven benchmark datasets. Experiments verify that the proposed M-VOC methods have several favorable properties, such as robustness to the variation in the size of training dataset and image resolution, as often encountered in real-world VOC applications.

Equation of state experiments and theory relevant to planetary modelling

International Nuclear Information System (INIS)

Ross, M.; Graboske, H.C. Jr.; Nellis, W.J.

1981-01-01

In recent years there have been a number of static and shockwave experiments on the properties of planetary materials. The highest pressure measurements, and the ones most relevant to planetary modelling, have been obtained by shock compression. Of particular interest to the Jovian group are results for H 2 , H 2 O, CH 4 and NH 3 . Although the properties of metallic hydrogen have not been measured, they have been the subject of extensive calculations. In addition recent shock wave experiments on iron report to have detected melting under Earth core conditions. From this data theoretical models have been developed for computing the equations of state of materials used in planetary studies. A compelling feature that has followed from the use of improved material properties is a simplification in the planetary models. (author)

Home cage wheel running is an objective and clinically relevant method to assess inflammatory pain in male and female rats

Science.gov (United States)

Kandasamy, Ram; Calsbeek, Jonas J.; Morgan, Michael M.

2016-01-01

Background The assessment of nociception in preclinical studies is undergoing a transformation from pain-evoked to pain-depressed tests to more closely mimic the effects of clinical pain. Many inflammatory pain-depressed behaviors (reward seeking, locomotion) have been examined, but these tests are limited because of confounds such as stress and difficulties in quantifying behavior. New Method The present study evaluates home cage wheel running as an objective method to assess the magnitude and duration of inflammatory pain in male and female rats. Results Injection of Complete Freund’s Adjuvant (CFA) into the right hindpaw to induce inflammatory pain almost completely inhibited wheel running for 2 days in males and females. Wheel running gradually returned to baseline levels within 12 days despite persistent mechanical hypersensitivity (von Frey test). Comparison with Existing Methods Continuously monitoring home cage wheel running improves on previous studies examining inflammatory pain-depressed wheel running because it is more sensitive to noxious stimuli, avoids the stress of removing the rat from its cage for testing, and provides a complete analysis of the time course for changes in nociception. Conclusions The present data indicate that home cage wheel running is a clinically relevant method to assess inflammatory pain in the rat. The decrease in activity caused by inflammatory pain and subsequent gradual recovery mimics the changes in activity caused by pain in humans. The tendency for pain-depressed wheel running to be greater in female than male rats is consistent with the tendency for women to be at greater risk of chronic pain than men. PMID:26891874

DETERMINATION OF OBJECTIVES FOR URBAN FREIGHT POLICY

Directory of Open Access Journals (Sweden)

Daniel Kaszubowski

2014-12-01

Full Text Available Background: Decisions regarding strategic planning of urban freight transport very often are based on superficial assumptions inadequately reflecting the actual character of encountered challenges. The trend may be observed to adapt isolated solutions without supporting measures and verification of expected outcomes. Selected urban freight solutions have a significant potential to alleviate transport related problems, but they require unorthodox approach beyond standard traffic planning and road management. City's current planning experience must be taken into account to plan an optimized sequence of actions. Method: Due to complexity of the problem and specific decision making factors the analytic network process ANP was selected to determine relevant objective of the urban freight policy. Gdynia was selected as the subject for modeling with a review of the current freight planning practice as a first step. Then, classification of policy objective and their prerequisites were identified supported with descriptive feasibility assessment. This allowed for a development of the ANP decision-making model. Results: Considered objectives for urban freight policy were identified were optimization, reduction and transfer. After verifying relevant decision factors optimization was selected as the most feasible option for Gdynia. Other alternatives were rated around four times lower with a slight prevalence of reduction over transfer. Such ranking reflects current planning practice and availability of transferable experiences. Despite the indicative results, it must be stressed that urban freight planning should be based on the long term methodical approach not to exclude any emerging possibilities. 

Shreddability of pizza Mozzarella cheese predicted using physicochemical properties.

Science.gov (United States)

Banville, V; Morin, P; Pouliot, Y; Britten, M

2014-07-01

This study used rheological techniques such as uniaxial compression, wire cutting, and dynamic oscillatory shear to probe the physical properties of pizza Mozzarella cheeses. Predictive models were built using compositional and textural descriptors to predict cheese shreddability. Experimental cheeses were made using milk with (0.25% wt/wt) or without denatured whey protein and renneted at pH 6.5 or 6.4. The cheeses were aged for 8, 22, or 36 d and then tested at 4, 13, or 22°C for textural attributes using 11 descriptors. Adding denatured whey protein and reducing the milk renneting pH strongly affected cheese mechanical properties, but these effects were usually dependent on testing temperature. Cheeses were generally weaker as they aged. None of the compositional or rheological descriptors taken alone could predict the shredding behavior of the cheeses. Using the stepwise method, an objective selection of a few (<4) relevant descriptors made it possible to predict the production of fines (R(2)=0.82), the percentage of long shreds (R(2)=0.67), and to a lesser degree, the adhesion of cheese to the shredding blade (R(2)=0.45). The principal component analysis markedly contrasted the adhesion of cheese to the shredding blade with other shredding properties such as the production of fines or long shreds. The predictive models and principal component analysis can help manufacturers select relevant descriptors for the development of cheese with optimal mechanical behavior under shredding conditions. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Recurrent processing during object recognition

Directory of Open Access Journals (Sweden)

Randall C. O'Reilly

2013-04-01

Full Text Available How does the brain learn to recognize objects visually, and perform this difficult feat robustly in the face of many sources of ambiguity and variability? We present a computational model based on the biology of the relevant visual pathways that learns to reliably recognize 100 different object categories in the face of of naturally-occurring variability in location, rotation, size, and lighting. The model exhibits robustness to highly ambiguous, partially occluded inputs. Both the unified, biologically plausible learning mechanism and the robustness to occlusion derive from the role that recurrent connectivity and recurrent processing mechanisms play in the model. Furthermore, this interaction of recurrent connectivity and learning predicts that high-level visual representations should be shaped by error signals from nearby, associated brain areas over the course of visual learning. Consistent with this prediction, we show how semantic knowledge about object categories changes the nature of their learned visual representations, as well as how this representational shift supports the mapping between perceptual and conceptual knowledge. Altogether, these findings support the potential importance of ongoing recurrent processing throughout the brain's visual system and suggest ways in which object recognition can be understood in terms of interactions within and between processes over time.

C++, objected-oriented programming, and astronomical data models

Science.gov (United States)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

Summary report on safety objectives in nuclear power plants

International Nuclear Information System (INIS)

1989-01-01

The special Task Force on Safety Objectives of the Commission of the European Communities (CEC) Working Group on the Safety of Light Water Reactors reported in May 1983 on its review of existing overall safety objectives in nuclear power plants. Since then much relevant worlwide activity has taken place. This report reviews those activities that have taken place since 1983 in European Community Member States, including more recent Members, as well as in Sweden and Finland. The report confines itself to issues related to probabilistic safety objectives, and concludes that significant progress has been made in many areas. Mutual understanding of safety objectives is leading to a convergence of views and approaches, but it is noted that much work remains to be completed

Interviewing Objects: Including Educational Technologies as Qualitative Research Participants

Science.gov (United States)

Adams, Catherine A.; Thompson, Terrie Lynn

2011-01-01

This article argues the importance of including significant technologies-in-use as key qualitative research participants when studying today's digitally enhanced learning environments. We gather a set of eight heuristics to assist qualitative researchers in "interviewing" technologies-in-use (or other relevant objects), drawing on concrete…

Infrared polarimetry and photometry of BL Lac objects

International Nuclear Information System (INIS)

Impey, C.D.; Williams, P.M.

1984-01-01

Photometry and polarimetry in the JHK wavebands have now been obtained for 25 BL Lac objects. Several new objects have been monitored for periods of up to five days, and accumulated data is sufficient for a statistical analysis of polarization properties. The selection effects operating on this sample are examined first. A power-law spectrum is consistent with the spectra of all but three objects. A number of important new results are reported. (author)

Exploring emerging learning needs: a UK-wide consultation on environmental sustainability learning objectives for medical education.

Science.gov (United States)

Walpole, Sarah C; Mortimer, Frances; Inman, Alice; Braithwaite, Isobel; Thompson, Trevor

2015-12-24

This study aimed to engage wide-ranging stakeholders and develop consensus learning objectives for undergraduate and postgraduate medical education. A UK-wide consultation garnered opinions of healthcare students, healthcare educators and other key stakeholders about environmental sustainability in medical education. The policy Delphi approach informed this study. Draft learning objectives were revised iteratively during three rounds of consultation: online questionnaire or telephone interview, face-to-face seminar and email consultation. Twelve draft learning objectives were developed based on review of relevant literature. In round one, 64 participants' median ratings of the learning objectives were 3.5 for relevance and 3.0 for feasibility on a Likert scale of one to four. Revisions were proposed, e.g. to highlight relevance to public health and professionalism. Thirty three participants attended round two. Conflicting opinions were explored. Added content areas included health benefits of sustainable behaviours. To enhance usability, restructuring provided three overarching learning objectives, each with subsidiary points. All participants from rounds one and two were contacted in round three, and no further edits were required. This is the first attempt to define consensus learning objectives for medical students about environmental sustainability. Allowing a wide range of stakeholders to comment on multiple iterations of the document stimulated their engagement with the issues raised and ownership of the resulting learning objectives.

Current Empirical Premises to the Disclosure of the Secrets of Property in Law: A Foundation and a Guideline for Future Research

Directory of Open Access Journals (Sweden)

Geir Stenseth

2008-12-01

Full Text Available This article presents an empirical legal study in the field of property theory. I take as my point of departure the perspective of exclusion. Such a basic perspective falls short, however, when we conceptualize the exceptions from the exclusion rule. In this respect, a diversified set of considerations and concerns claims attention, including the nature of the relationship between the possessor and the object in question. This research digs into the new achievements in the fields of economics and life sciences, investigating the validity and relevance of arguments which may be derived from the possessor-object dimension. The findings suggest a differentiated view on how people comprehend various situations of possession, and the article proposes a gradual theoretical model for shaping and managing the legal concept of property in this respect. Finally, I indicate some practical legal topics which may take advantage of the model (e.g. the field of expropriation, the problem of whether a possession should be protected by a property rule or by a liability rule, and the problems related to property as a human right.

Synthesis of optical holograms of rotating objects

International Nuclear Information System (INIS)

Bogdanova, T.V.; Titar', V.P.; Tomchuk, E.Ya.

1998-01-01

A method of synthesis of rotating objects is analyzed and its advantages over the previously known methods and restrictions caused by the nonlinear character of motion of objects being studied are determined. Numerical simulation is used to study properties of synthesized holograms and the images reconstructed with their help. The resolving power of synthesized holograms is determined. The pulsed response of the system used for the synthesis of rotating objects is studied and its isoplanar sections are determined. It is shown that in the optical range, in contrast to the radio-frequency range, one can synthesize holograms and reconstruct visual images not only of rotating objects, but of vibrating objects as well. For small angles of object rotation (0.0025 rad), an image with a high resolution power (0.0004 m) can be obtained

Results of comparative evaluations concerning the psychic process of perceiving and assessing risk-objects by the general public

International Nuclear Information System (INIS)

Peters, H.P.; Renn, O.

1983-01-01

The perception of risk has become a mayor research field, after scientists and politicians recognized that scientific risk studies like the Rasmussen-Report on nuclear energy had no large impact on the public acceptance. With our surveys we aimed to combine two methodological approaches (object perception and attitude theory) and to develop a technique in which the psychic process of perceiving and assessing risk-objects by the general public was followed up and analyzed. Psychological experiments in the field of isolating relevant factors of qualitative risk properties as well as demographic surveys for the measurement of the belief structure were carried out. Our results indicate that in objection to the common conception by natural scientists people in general have a good estimative ability to judge the expected value of different risks. But beyond this estimation of fatalities people also use other criteria (like personal control) to order different objects in respect to their riskiness. The perceived risk is but one factor influencing attitude. A simplified model of the acceptance-building process is carried out showing that acceptance-building is not a purely individual process. Individuals are linked together by their social environment so that every individual decision is influenced by the decision of other people

Physical properties of neem (Azadirachta indica seeds and kernels relevant in the design of processing machineries

Directory of Open Access Journals (Sweden)

A. A. Balami

2014-08-01

Full Text Available This study was undertaken to determine some physical properties of neem seeds and kernels such as axial dimensions, true density, bulk density, surface area, sphericity, moisture content, coefficient of friction, angle of repose and porosity that are relevant in the design of processing machineries. Results shows that the seeds and kernels have major, intermediate and minor diameter values of 13.641.15 mm, 6.800.41 mm and 5.540.44 mm and 9.321.13 mm, 4.320.63 mm and 3.380.35 mm respectively. The true density, bulk density, surface areas and the sphericity determined were 379.0015.16 kg/m3, 39.2930.001 kg/m3, 169.9331.15 mm2, 0.640.043 for the seed while for the kernel were 930.038.53 kg/m3, 534.8910.99 kg/m3, 70.6313.98 mm2, 0.610.044 respectively at an average moisture content of 13.80 % for the seed and 11.9 % for the kernel on wet basis. The coefficient of friction determined on three different structural surfaces namely plywood, glass and mild steel for the seeds were 0.38, 0.42 and 0.33 respectively at an angle of repose of 34.52o while that of the kernels were 0.49, 0.56 and 0.43 respectively at an angle of repose of 42.47°. The mean porosity obtained for the seed and kernel were 89.62 % and 42.47 % respectively.

Uses of Computer and its Relevance to Teaching and Learning in ...

African Journals Online (AJOL)

This paper examined the uses of computer and its relevance to teaching and learning in Nigerian secondary schools. The need for computer education and its objectives in Nigerian educational system were identified and discussed. The roles the classroom teachers would play and the challenges they would have to face in ...

Thermodynamic properties of actinide aqueous species relevant to geochemical problems

International Nuclear Information System (INIS)

Fuger, J.

1992-01-01

The status of our knowledge of the basic thermodynamic properties of the aqueous complexes of the actinides in their different valency states with two environmentally important ligands, namely hydroxide and carbonate is overviewed. Even in the case of uranium which has been the most studied, gaps are found among the relative wealth of trustworthy formation constants, especially for the less stable valence states. The need for substantial improvement of our knowledge in the case of the other actinides, especially transuranium elements, is outlined. The relative scarcity of enthalpy of formation data is also stressed. (orig.)

Object similarity affects the perceptual strategy underlying invariant visual object recognition in rats

Directory of Open Access Journals (Sweden)

Federica Bianca Rosselli

2015-03-01

Full Text Available In recent years, a number of studies have explored the possible use of rats as models of high-level visual functions. One central question at the root of such an investigation is to understand whether rat object vision relies on the processing of visual shape features or, rather, on lower-order image properties (e.g., overall brightness. In a recent study, we have shown that rats are capable of extracting multiple features of an object that are diagnostic of its identity, at least when those features are, structure-wise, distinct enough to be parsed by the rat visual system. In the present study, we have assessed the impact of object structure on rat perceptual strategy. We trained rats to discriminate between two structurally similar objects, and compared their recognition strategies with those reported in our previous study. We found that, under conditions of lower stimulus discriminability, rat visual discrimination strategy becomes more view-dependent and subject-dependent. Rats were still able to recognize the target objects, in a way that was largely tolerant (i.e., invariant to object transformation; however, the larger structural and pixel-wise similarity affected the way objects were processed. Compared to the findings of our previous study, the patterns of diagnostic features were: i smaller and more scattered; ii only partially preserved across object views; and iii only partially reproducible across rats. On the other hand, rats were still found to adopt a multi-featural processing strategy and to make use of part of the optimal discriminatory information afforded by the two objects. Our findings suggest that, as in humans, rat invariant recognition can flexibly rely on either view-invariant representations of distinctive object features or view-specific object representations, acquired through learning.

Quantitative software-reliability analysis of computer codes relevant to nuclear safety

International Nuclear Information System (INIS)

Mueller, C.J.

1981-12-01

This report presents the results of the first year of an ongoing research program to determine the probability of failure characteristics of computer codes relevant to nuclear safety. An introduction to both qualitative and quantitative aspects of nuclear software is given. A mathematical framework is presented which will enable the a priori prediction of the probability of failure characteristics of a code given the proper specification of its properties. The framework consists of four parts: (1) a classification system for software errors and code failures; (2) probabilistic modeling for selected reliability characteristics; (3) multivariate regression analyses to establish predictive relationships among reliability characteristics and generic code property and development parameters; and (4) the associated information base. Preliminary data of the type needed to support the modeling and the predictions of this program are described. Illustrations of the use of the modeling are given but the results so obtained, as well as all results of code failure probabilities presented herein, are based on data which at this point are preliminary, incomplete, and possibly non-representative of codes relevant to nuclear safety

A multi-objective approach for developing national energy efficiency plans

International Nuclear Information System (INIS)

Haydt, Gustavo; Leal, Vítor; Dias, Luís

2014-01-01

This paper proposes a new approach to deal with the problem of building national energy efficiency (EE) plans, considering multiple objectives instead of only energy savings. The objectives considered are minimizing the influence of energy use on climate change, minimizing the financial risk from the investment, maximizing the security of energy supply, minimizing investment costs, minimizing the impacts of building new power plants and transmission infrastructures, and maximizing the local air quality. These were identified through literature review and interaction with real decision makers. A database of measures is established, from which millions of potential EE plans can be built by combining measures and their respective degree of implementation. Finally, a hybrid multi-objective and multi-criteria decision analysis (MCDA) model is proposed to search and select the EE plans that best match the decision makers’ preferences. An illustration of the working mode and the type of results obtained from this novel hybrid model is provided through an application to Portugal. For each of five decision perspectives a wide range of potential best plans were identified. These wide ranges show the relevance of introducing multi-objective analysis in a comprehensive search space as a tool to inform decisions about national EE plans. - Highlights: • A multiple objective approach to aid the choice of national energy efficiency plans. • A hybrid multi-objective MCDA model is proposed to search among the possible plans. • The model identified relevant plans according to five different idealized DMs. • The approach is tested with Portugal

The representational dynamics of task and object processing in humans

Science.gov (United States)

Bankson, Brett B; Harel, Assaf

2018-01-01

Despite the importance of an observer’s goals in determining how a visual object is categorized, surprisingly little is known about how humans process the task context in which objects occur and how it may interact with the processing of objects. Using magnetoencephalography (MEG), functional magnetic resonance imaging (fMRI) and multivariate techniques, we studied the spatial and temporal dynamics of task and object processing. Our results reveal a sequence of separate but overlapping task-related processes spread across frontoparietal and occipitotemporal cortex. Task exhibited late effects on object processing by selectively enhancing task-relevant object features, with limited impact on the overall pattern of object representations. Combining MEG and fMRI data, we reveal a parallel rise in task-related signals throughout the cerebral cortex, with an increasing dominance of task over object representations from early to higher visual areas. Collectively, our results reveal the complex dynamics underlying task and object representations throughout human cortex. PMID:29384473

Relevance of the international spinal cord injury basic data sets to youth

DEFF Research Database (Denmark)

Carroll, A; Vogel, L C; Zebracki, K

2017-01-01

STUDY DESIGN: Mixed methods, using the Modified Delphi Technique and Expert Panel Review. OBJECTIVE: To evaluate the utility and relevance of the International Spinal Cord Injury (SCI) Core and Basic Data Sets for children and youth with SCI. SETTING: International. METHODS: Via 20 electronic...

Relevance of human anatomy in daily clinical practice.

Science.gov (United States)

Arráez-Aybar, Luis-Alfonso; Sánchez-Montesinos, Indalecio; Mirapeix, Rosa-M; Mompeo-Corredera, Blanca; Sañudo-Tejero, Jose-Ramón

2010-12-20

the aim of this study has been to evaluate the relevance of gross human anatomy in daily clinical practice and to compare it to that of other basic sciences (biochemistry, bioethics, cytohistology, microbiology, pharmacology, physiology, psychology). a total of 1250 questionnaires were distributed among 38 different medical speciality professionals. Answers were analyzed taking into account speciality (medical, surgery and others), professional status (training physician or staff member) and professional experience. the response rate was 42.9% (n=536). Gross human anatomy was considered the most relevant basic discipline for surgical specialists, while pharmacology and physiology were most relevant for medical specialists. Knowledge of anatomy was also considered fundamental for understanding neurological or musculoskeletal disorders. In undergraduate programmes, the most important focuses in teaching anatomy were radiological, topographical and functional anatomy followed by systematic anatomy. In daily medical practice anatomy was considered basic for physical examination, symptom interpretation and interpretation of radiological images. When professional status or professional experience was considered, small variations were shown and there were no significant differences related to gender or community. our results underline the relevance of basic sciences (gross anatomy, physiology, and pharmacology) in daily professional activity. Evidence-based studies such as ours, lend greater credibility and objectivity to the role of gross anatomy in the undergraduate training of health professionals and should help to establish a more appropriate curriculum for future professionals. 2010 Elsevier GmbH. All rights reserved.

Degrading radiation effects on properties of bromobutyl rubber compounds

Energy Technology Data Exchange (ETDEWEB)

Scagliusi, Sandra R.; Cardoso, Elisabeth C.L.; Pozenato, Cristina A.; Lugao, Ademar B., E-mail: srscagliusi@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

The understanding of chemistry involved in degradation induced radiation is becoming more and more relevant in the re-use of polymeric materials, as well in beneficial radiation uses. Degrading radiation effects have been considered from viewpoint of controlled degradation for isoprene/isobutene in rubbers for recycling purposes. Bromobutyl rubber (BIIR) is an isobutylene/isoprene copolymer comprising 1.9 to 2.1% bromine and has a lot of applications including in tires air-chambers. In this work there were evaluated gamma-irradiation effects for re-use or recycling objectives in elastomeric bromobutyl compositions irradiated at 5, 15, 25, 50, 100,150 and 200 kGy. Mechanical properties, hardness and swelling were assessed in non-vulcanized and vulcanized rubber, non-irradiated and irradiated at different doses. The major gamma radiation effect in butyl rubber is the generation of free radicals along changes in mechanical properties. Irradiation effects in bromobutyl rubber compounds were comprehensively investigated, demonstrated and discussed. (author)

Degrading radiation effects on properties of bromobutyl rubber compounds

International Nuclear Information System (INIS)

Scagliusi, Sandra R.; Cardoso, Elisabeth C.L.; Pozenato, Cristina A.; Lugao, Ademar B.

2013-01-01

The understanding of chemistry involved in degradation induced radiation is becoming more and more relevant in the re-use of polymeric materials, as well in beneficial radiation uses. Degrading radiation effects have been considered from viewpoint of controlled degradation for isoprene/isobutene in rubbers for recycling purposes. Bromobutyl rubber (BIIR) is an isobutylene/isoprene copolymer comprising 1.9 to 2.1% bromine and has a lot of applications including in tires air-chambers. In this work there were evaluated gamma-irradiation effects for re-use or recycling objectives in elastomeric bromobutyl compositions irradiated at 5, 15, 25, 50, 100,150 and 200 kGy. Mechanical properties, hardness and swelling were assessed in non-vulcanized and vulcanized rubber, non-irradiated and irradiated at different doses. The major gamma radiation effect in butyl rubber is the generation of free radicals along changes in mechanical properties. Irradiation effects in bromobutyl rubber compounds were comprehensively investigated, demonstrated and discussed. (author)

Relevance vector machine technique for the inverse scattering problem

International Nuclear Information System (INIS)

Wang Fang-Fang; Zhang Ye-Rong

2012-01-01

A novel method based on the relevance vector machine (RVM) for the inverse scattering problem is presented in this paper. The nonlinearity and the ill-posedness inherent in this problem are simultaneously considered. The nonlinearity is embodied in the relation between the scattered field and the target property, which can be obtained through the RVM training process. Besides, rather than utilizing regularization, the ill-posed nature of the inversion is naturally accounted for because the RVM can produce a probabilistic output. Simulation results reveal that the proposed RVM-based approach can provide comparative performances in terms of accuracy, convergence, robustness, generalization, and improved performance in terms of sparse property in comparison with the support vector machine (SVM) based approach. (general)

Autonomia e relevância dos regimes The autonomy and relevance of regimes

Directory of Open Access Journals (Sweden)

Gustavo Seignemartin de Carvalho

2005-12-01

of norms and rules that create patterns of behavior and allow the convergence of the expectations of their participants in specific issue areas, in order to solve coordination problems that could lead to non-pareto-efficient outcomes. Considering that such definitions based merely on the "efficiency" of regimes do not seem to be sufficient to explain their effectiveness, the present article proposes a different definition for regimes: political arrangements that allow a redistribution of the gains of cooperation among the participants in certain issue areas, within an interdependence context. Regimes would thus be effective due to their autonomy and relevance - that is, due to their objective existence autonomously from their participants and their influence on the participants' behavior and expectations in ways that cannot be reduced to the individual action of any of them. This article begins with a brief discussion about terminological problems related to regime studies and with a definition of the concepts of autonomy and relevance. Then it classifies the authors that take part in this debate according to two distinct perspectives, one that denies (non-autonomists and the other that attributes (autonomists autonomy and relevance to regimes, briefly analyzing the authors and traditions that are more significant for this debate, focusing on autonomist authors and on arguments that back the hypothesis here presented. Finally, the article proposes an analytic decomposition of regimes into four main elements that give them autonomy and relevance: normativity, actors, specificity of the issue area and complex interdependence as context.

Five aspects of maximizing objectivity from perceptual evaluations of loudspeakers

DEFF Research Database (Denmark)

Volk, Christer Peter; Bech, Søren; Pedersen, Torben H.

2015-01-01

of data from the listening evaluations. This paper addresses the following subset of aspects for increasing the objectivity of data from listening tests: The choice of perceptual attributes, relevance of perceptual attributes, choice of loudness equalisation strategy, optimum listening room specifications......A literature study was conducted focusing on maximizing objectivity of results from listening evaluations aimed at establishing the relationship between physical and perceptual measurements of loudspeakers. The purpose of the study was to identify and examine factors influencing the objectivity......, as well as loudspeaker listening in-situ vs. listening to recordings of loudspeakers over headphones....

Seeking kinetic pathways relevant to the structural evolution of metal nanoparticles

International Nuclear Information System (INIS)

Haldar, Paramita; Chatterjee, Abhijit

2015-01-01

Understanding the kinetic pathways that cause metal nanoparticles to structurally evolve over time is essential for predicting their shape and size distributions and catalytic properties. Consequently, we need detailed kinetic models that can provide such information. Most kinetic Monte Carlo models used for metal systems contain a fixed catalogue of atomic moves; the catalogue is largely constructed based on our physical understanding of the material. In some situations, it is possible that an incorrect picture of the overall dynamics is obtained when kinetic pathways that are relevant to the dynamics are missing from the catalogue. Hence, a computational framework that can systematically determine the relevant pathways is required. This work intends to fulfil this requirement. Examples involving an Ag nanoparticle are studied to illustrate how molecular dynamics (MD) calculations can be employed to find the relevant pathways in a system. Since pathways that are unlikely to be selected at short timescales can become relevant at longer times, the accuracy of the catalogue is maintained by continually seeking these pathways using MD. We discuss various aspects of our approach, namely, defining the relevance of atomic moves to the dynamics and determining when additional MD is required to ensure the desired accuracy, as well as physical insights into the Ag nanoparticle. (paper)

Numerical study of properties of many-dimensional soliton-type objects

International Nuclear Information System (INIS)

Makhankov, V.G.; Shvachka, A.B.

1980-01-01

A brief review of the dynamical properties of many-dimensional quasi-solitons studied by means of the computer simulation in the framework of the nonlinear classical field theory models is presented. It is shown that the types of soliton interactions are model independent for studied models

A Benchmark for Evaluating Moving Object Indexes

DEFF Research Database (Denmark)

Chen, Su; Jensen, Christian Søndergaard; Lin, Dan

2008-01-01

that targets techniques for the indexing of the current and near-future positions of moving objects. This benchmark enables the comparison of existing and future indexing techniques. It covers important aspects of such indexes that have not previously been covered by any benchmark. Notable aspects covered......Progress in science and engineering relies on the ability to measure, reliably and in detail, pertinent properties of artifacts under design. Progress in the area of database-index design thus relies on empirical studies based on prototype implementations of indexes. This paper proposes a benchmark...... include update efficiency, query efficiency, concurrency control, and storage requirements. Next, the paper applies the benchmark to half a dozen notable moving-object indexes, thus demonstrating the viability of the benchmark and offering new insight into the performance properties of the indexes....

The emerging causal understanding of institutional objects.

Science.gov (United States)

Noyes, Alexander; Keil, Frank C; Dunham, Yarrow

2018-01-01

Institutional objects, such as money, drivers' licenses, and borders, have functions because of their social roles rather than their immediate physical properties. These objects are causally different than standard artifacts (e.g. hammers, chairs, and cars), sharing more commonality with other social roles. Thus, they inform psychological theories of human-made objects as well as children's emerging understanding of social reality. We examined whether children (N=180, ages 4-9) differentiate institutional objects from standard artifacts. Specifically, we examine whether children understand that mutual intentions (i.e., the intentions of a social collective) underlie the functional affordances of institutional objects in ways that they do not for standard artifacts. We find that young children assimilate institutional objects into their intuitive theories of standard artifacts; children begin to differentiate between the domains in the elementary school years. Published by Elsevier B.V.

Automatic object recognition and change detection of urban trees

NARCIS (Netherlands)

Van der Sande, C.J.

2010-01-01

Monitoring of tree objects is relevant in many current policy issues and relate to the quality of the public space, municipal urban green management, management fees for green areas or Kyoto protocol reporting and all have one thing in common: the need for an up to date tree database. This study,

Children's use of comparison and function in novel object categorization.

Science.gov (United States)

Kimura, Katherine; Hunley, Samuel B; Namy, Laura L

2018-06-01

Although young children often rely on salient perceptual cues, such as shape, when categorizing novel objects, children eventually shift towards deeper relational reasoning about category membership. This study investigates what information young children use to classify novel instances of familiar categories. Specifically, we investigated two sources of information that have the potential to facilitate the classification of novel exemplars: (1) comparison of familiar category instances, and (2) attention to function information that might direct children's attention to functionally relevant perceptual features. Across two experiments, we found that comparing two perceptually similar category members-particularly when function information was also highlighted-led children to discover non-obvious relational features that supported their categorization of novel category instances. Together, these findings demonstrate that comparison may aid in novel object categorization by heightening the salience of less obvious, yet functionally relevant, relational structures that support conceptual reasoning. Copyright © 2018. Published by Elsevier Inc.

Safe structural food bolus in elderly: the relevant parameters

OpenAIRE

Vandenberghe-Descamps, Mathilde; Septier, Chantal; Prot, Aurélie; Tournier, Carole; Hennequin, Martine; Vigneau, Evelyne; Feron, Gilles; Labouré, Hélène

2017-01-01

Mastication is essential to prepare food into a bolus ready to be swallowed safely, with no choking risk. Based on food bolus properties, a masticatory normative indicator was developed by Woda et al. (2010) to identify impaired masticatory function within good oral health population. The aim of the present study was to identify relevant parameters of bolus' structure to differentiate safe to unsafe bolus among elderly contrasting by their dental status.93 elderly, 58% with at least 7 posteri...

Useful and usable alarm systems : recommended properties

International Nuclear Information System (INIS)

Veland, Oeystein; Kaarstad, Magnhild; Seim, Lars Aage; Foerdestroemmen, Nils T.

2001-01-01

This document describes the result of a study on alarm systems conducted by IFE in Halden. The study was initiated by the Norwegian Petroleum Directorate. The objective was to identify and formulate a set of important properties for useful and usable alarm systems. The study is mainly based on review of the latest international recognised guidelines and standards on alarm systems available at the time of writing, with focus on realistic solutions from research and best practice from different industries. In addition, IFE experiences gathered through specification and design of alarm systems and experimental activities in HAMMLAB and bilateral projects, have been utilized where relevant. The document presents a total of 43 recommendations divided into a number of general recommendations and more detailed recommendations on alarm generation, structuring, prioritisation, presentation and handling. (Author)

Structural Fluctuations and Thermophysical Properties of Molten II-VI Compounds

Science.gov (United States)

Su, Ching-Hua; Zhu, Shen; Li, Chao; Scripa, R.; Lehoczky, Sandra L.; Kim, Y. W.; Baird, J. K.; Lin, B.; Ban, Heng; Benmore, Chris

2003-01-01

The objectives of the project are to conduct ground-based experimental and theoretical research on the structural fluctuations and thermophysical properties of molten II-VI compounds to enhance the basic understanding of the existing flight experiments in microgravity materials science programs as well as to study the fundamental heterophase fluctuation phenomena in these melts by: 1) conducting neutron scattering analysis and measuring quantitatively the relevant thermophysical properties of the II-VI melts (such as viscosity, electrical conductivity, thermal diffusivity and density) as well as the relaxation characteristics of these properties to advance the understanding of the structural properties and the relaxation phenomena in these melts and 2) performing theoretical analyses on the melt systems to interpret the experimental results. All the facilities required for the experimental measurements have been procured, installed and tested. It has long been recognized that liquid Te presents a unique case having properties between those of metals and semiconductors. The electrical conductivity for Te melt increases rapidly at melting point, indicating a semiconductor-metal transition. Te melts comprise two features, which are usually considered to be incompatible with each other: covalently bound atoms and metallic-like behavior. Why do Te liquids show metallic behavior? is one of the long-standing issues in liquid metal physics. Since thermophysical properties are very sensitive to the structural variations of a melt, we have conducted extensive thermophysical measurements on Te melt.

Consciousness: a neural capacity for objectivity, especially pronounced in humans

Science.gov (United States)

Dijker, Anton J. M.

2014-01-01

Consciousness tends to be viewed either as subjective experience of sensations and feelings, or as perception and internal representation of objects. This paper argues that neither view sufficiently acknowledges that consciousness may refer to the brain’s most adaptive property: its capacity to produce states of objectivity. It is proposed that this capacity relies on multiple sensorimotor networks for internally representing objects and their properties in terms of expectancies, as well as on motivational and motor mechanisms involved in exploration, play, and care for vulnerable living and non-living objects. States of objectivity are associated with a very special phenomenal aspect; the experience that subjective aspects are absent and one is “just looking” at the world as it really is and can be. However, these states are normally closely preceded and followed by (and tend to be combined or fused with) sensations and feelings which are caused by activation of sensory and motivational mechanisms. A capacity for objectivity may have evolved in different species and can be conceived as a common basis for other elusive psychological properties such as intelligence, conscience, and esthetic experience; all three linked to crucial behaviors in human evolution such as tool making, cooperation, and art. The brain’s pervasive tendency to objectify may be responsible for wrongly equating consciousness with feelings and wrongly opposing it to well-learned or habitual (“unconscious”) patterns of perception and behavior. PMID:24672506

Attentional capture within and between objects.

NARCIS (Netherlands)

Mortier, K.; Donk, M.; Theeuwes, J.

2003-01-01

The present study addressed the question whether attentional capture by abrupt onsets is affected by object-like properties of the stimulus field. Observers searched for a target circle at one of four ends of two solid rectangles. In the focused attention condition the location of the upcoming

Thermoluminescence dosimetry of electronic components from personal objects

International Nuclear Information System (INIS)

Beerten, Koen; Woda, Clemens; Vanhavere, Filip

2009-01-01

Owing to the existence of ceramic materials inside common personal objects such as cellular phones and USB flash drives, these objects may be very useful in emergency (accident) dosimetry. Here we will present initial results regarding the dosimetric properties as determined by thermoluminescence (TL) from two alumina-rich electronic components from a USB flash drive. The TL method was applied in order to investigate the potential of conventional TL equipment for such purposes. For comparison, the optically stimulated luminescence (OSL) of the components was investigated as well. The studied components are ceramic resonators and alumina-based substrates from electrical resistors. The results show that various TL-related properties such as fading, optical stability and zero-dose response are different for the two investigated components. On the basis of these properties, the ceramic resonator was selected for dose recovery tests using TL and OSL. The given dose could reliably be determined using both methods, assuming that prompt measurement and/or fading correction is possible.

Quasi-objects, Cult Objects and Fashion Objects

DEFF Research Database (Denmark)

Andersen, Bjørn Schiermer

2011-01-01

This article attempts to rehabilitate the concept of fetishism and to contribute to the debate on the social role of objects as well as to fashion theory. Extrapolating from Michel Serres’ theory of the quasi-objects, I distinguish two phenomenologies possessing almost opposite characteristics. T...... as a unique opportunity for studying the interchange between these two forms of fetishism and their respective phenomenologies. Finally, returning to Serres, I briefly consider the theoretical consequences of introducing the fashion object as a quasi-object.......This article attempts to rehabilitate the concept of fetishism and to contribute to the debate on the social role of objects as well as to fashion theory. Extrapolating from Michel Serres’ theory of the quasi-objects, I distinguish two phenomenologies possessing almost opposite characteristics....... These two phenomenologies are, so I argue, essential to quasi-object theory, yet largely ignored by Serres’ sociological interpreters. They correspond with the two different theories of fetishism found in Marx and Durkheim, respectively. In the second half of the article, I introduce the fashion object...

The peri-saccadic perception of objects and space.

Directory of Open Access Journals (Sweden)

Fred H Hamker

2008-02-01

Full Text Available Eye movements affect object localization and object recognition. Around saccade onset, briefly flashed stimuli appear compressed towards the saccade target, receptive fields dynamically change position, and the recognition of objects near the saccade target is improved. These effects have been attributed to different mechanisms. We provide a unifying account of peri-saccadic perception explaining all three phenomena by a quantitative computational approach simulating cortical cell responses on the population level. Contrary to the common view of spatial attention as a spotlight, our model suggests that oculomotor feedback alters the receptive field structure in multiple visual areas at an intermediate level of the cortical hierarchy to dynamically recruit cells for processing a relevant part of the visual field. The compression of visual space occurs at the expense of this locally enhanced processing capacity.

Study of the reactor relevance of the NET design concept

International Nuclear Information System (INIS)

Reynolds, P.; Worraker, W.J.

1987-08-01

The objective of the study was to explore the reactor relevance of NET, i.e. whether the technologies and design principles proposed for NET can be directly extrapolated to a demonstration power reactor (DEMO). The main areas of study were those near to the plasma, namely the divertor, first wall and tritium breeding blanket. Other aspects which were investigated were tritium permeation and recovery, reactor maintenance, afterheat and effects of disruptions. The principal results of the study are briefly presented; the details of the work are given in fourteen appendices. These appendices were selected for INIS and indexed separately. The overall conclusion of the study is that the NET design is only partly relevant to the design requirements of a DEMO reactor. (U.K.)

Polarimetry of Solar System Objects: Observations vs. Models

Science.gov (United States)

Yanamandra-Fisher, P. A.

2014-04-01

The overarching goals for the remote sensing and robotic exploration of planetary systems are: (1) understanding the formation of planetary systems and their diversity; and (2) search for habitability. Since all objects have unique polarimetric signatures inclusion of spectrophotopolarimetry as a complementary approach to standard techniques of imaging and spectroscopy, provides insight into the scattering properties of the planetary media. Specifically, linear and circular polarimetric signatures of the object arise from different physical processes and their study proves essential to the characterization of the object. Linear polarization of reflected light by various solar system objects provides insight into the scattering characteristics of atmospheric aerosols and hazes? and surficial properties of atmosphereless bodies. Many optically active materials are anisotropic and so their scattering properties differ with the object's principal axes (such as dichroic or birefringent materials) and are crystalline in structure instead of amorphous, (eg., the presence of olivines and silicates in cometary dust and circumstellar disks? Titan, etc.). Ices (water and other species) are abundant in the system indicated in their near - infrared spectra. Gas giants form outside the frost line (where ices condense), and their satellites and ring systems exhibit signature of water ice? clathrates, nonices (Si, C, Fe) in their NIR spectra and spectral dependence of linear polarization. Additionally, spectral dependence of polarization is important to separate the macroscopic (bulk) properties of the scattering medium from the microscopic (particulate) properties of the scattering medium. Circular polarization, on the other hand, is indicative of magnetic fields and biologically active molecules, necessary for habitability. These applications suffer from lack of detailed observations, instrumentation, dedicated missions and numericalretrieval methods. With recent discoveries and

41 CFR 102-80.90 - Is the Fire Administration Authorization Act of 1992 (Public Law 102-522) relevant to fire...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Is the Fire Administration Authorization Act of 1992 (Public Law 102-522) relevant to fire protection engineering? 102-80.90 Section 102-80.90 Public Contracts and Property Management Federal Property Management Regulations System...

Spectroscopic Properties of Tc(I) Tricarbonyl Species Relevant to the Hanford Tank Waste

Energy Technology Data Exchange (ETDEWEB)

Levitskaia, Tatiana G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Andersen, Amity [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chatterjee, Sayandev [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hall, Gabriel B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walter, Eric D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Washton, Nancy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-12-04

Technetium-99 (Tc) exists predominately in soluble forms in the liquid supernatant and salt cake fractions of the nuclear tank waste stored at the U.S. DOE Hanford Site. In the strongly alkaline environments prevalent in the tank waste, its dominant chemical form is pertechnetate (TcO4-, oxidation state +7). However, attempts to remove Tc from the Hanford tank waste using ion-exchange processes specific to TcO₄^- only met with limited success, particularly processing tank waste samples containing elevated concentrations of organic complexants. This suggests that a significant fraction of the soluble Tc can be present as non-pertechnetate low-valent Tc (oxidation state < +7) (non-pertechnetate). The chemical identities of these non-pertechnetate species are poorly understood. Previous analysis of the SY-101 and SY-103 tank waste samples provided strong evidence that non-pertechnetate can be comprised of [Tc(CO)₃]⁺ complexes containing Tc in oxidation state +1 (Lukens et al. 2004). During the last two years, our team has expanded this work and demonstrated that high-ionic-strength solutions typifying tank waste supernatants promote oxidative stability of the [Tc(CO)₃]⁺ species (Rapko et al. 2013; Levitskaia et al. 2014). It also was observed that high-ionic-strength alkaline matrices stabilize Tc(VI) and potentially Tc(IV) oxidation states, particularly in presence organic chelators, suggesting that the relevant Tc compounds can serve as important redox intermediates facilitating the reduction of Tc(VII) to Tc(I). Designing strategies for effective Tc processing, including separation and immobilization, necessitates understanding the molecular structure of these non-pertechnetate species and their identification in the actual tank waste samples. To-date, only limited information exists regarding the nature and characterization of the Tc(I), Tc(IV), and Tc(VI) species. One objective of this project is to

Determining root correspondence between previously and newly detected objects

Science.gov (United States)

Paglieroni, David W.; Beer, N Reginald

2014-06-17

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

Stored object knowledge and the production of referring expressions : The case of color typicality

NARCIS (Netherlands)

Westerbeek, Hans; Koolen, Ruud; Maes, A.A.

2015-01-01

When speakers describe objects with atypical properties, do they include these properties in their referring expressions, even when that is not strictly required for unique referent identification? Based on previous work, we predict that speakers mention the color of a target object more often when

The Initial Development of Object Knowledge by a Learning Robot.

Science.gov (United States)

Modayil, Joseph; Kuipers, Benjamin

2008-11-30

We describe how a robot can develop knowledge of the objects in its environment directly from unsupervised sensorimotor experience. The object knowledge consists of multiple integrated representations: trackers that form spatio-temporal clusters of sensory experience, percepts that represent properties for the tracked objects, classes that support efficient generalization from past experience, and actions that reliably change object percepts. We evaluate how well this intrinsically acquired object knowledge can be used to solve externally specified tasks including object recognition and achieving goals that require both planning and continuous control.

A plausible energy source and structure for quasi-stellar objects

Science.gov (United States)

Daltabuit, E.; Cox, D.

1972-01-01

If a collision of two large, massive, fast gas clouds occurs, their kinetic energy is converted to radiation in a pair of shock fronts at their interface. The resulting structure is described, and the relevance of this as a radiation source for quasi-stellar objects is considered.

User perspectives on relevance criteria

DEFF Research Database (Denmark)

Maglaughlin, Kelly L.; Sonnenwald, Diane H.

2002-01-01

, partially relevant, or not relevant to their information need; and explained their decisions in an interview. Analysis revealed 29 criteria, discussed positively and negatively, that were used by the participants when selecting passages that contributed or detracted from a document's relevance......This study investigates the use of criteria to assess relevant, partially relevant, and not-relevant documents. Study participants identified passages within 20 document representations that they used to make relevance judgments; judged each document representation as a whole to be relevant...... matter, thought catalyst), full text (e.g., audience, novelty, type, possible content, utility), journal/publisher (e.g., novelty, main focus, perceived quality), and personal (e.g., competition, time requirements). Results further indicate that multiple criteria are used when making relevant, partially...

Object Pragmatics and Language Development.

Science.gov (United States)

Béguin, Marie

2016-12-01

The purpose of this contribution is to investigate the advent of language in the light of the appropriation of the cultural uses of the material objects related to material culture and the constitution of their public and shared meanings linked to their uses. First, we suggest that the Object Pragmatics paradigm offers a framework which allows us to take into account the uses of objects in daily life as a site of social conventions, communication and public and shared meanings. Second, we would like to underline the key role of the adult's mediations in the child's ability to evolve towards linguistic development. This contribution will discuss the notion of scenario involving primarily the object, as a possible semiotic tool to support the child's transition to language. We will finally illustrate that it is possible to take into consideration the mastery of conventional uses of the object in the child's ability to engage in a scenario and then to move towards communication and speech development. These issues will be addressed in the context of a research project which focuses on the observation of children interacting with an adult at 16, 20 and 24 months. These longitudinal data were collected by video in a semi-experimental triadic interaction design. The triadic interaction is considered as a relevant unit for the observation and analysis of the role of material culture in speech development, suggesting the existence of new mechanisms to be taken into account in addition to the interactive conditions largely mentioned in literature.

Displaying lives: the narrative of objects in biographical exhibitions

Directory of Open Access Journals (Sweden)

Caterina Albano

2007-03-01

Full Text Available Biographical exhibitions are a museum practice that asks for critical consideration. Grounding the argument in critical theory, social studies and museum theory, the article explores the narrative function of objects in biographical exhibitions by addressing the social significance of objects in relation to biography and their relevance when presented into an exhibition display. Central is the concept of objects as ‘biographical relics’ that are culturally fetishized in biographical narratives. This raises questions about biographical reliability and the cultural role that such objects plays in exhibition narratives as bearers of reality and as metonymical icons of the biographical subject. The article considers examples of biographical exhibitions of diverse figures such as Gregor Mendel, Madame de Pompadour and Roland Barthes, and the role that personal items, but also portraits and photographs, play in them.

Infrared polarimetry and photometry of BL Lac objects. 2

Energy Technology Data Exchange (ETDEWEB)

Impey, C D [Hawaii Univ., Honolulu (USA). Inst. for Astronomy; Brand, P W.J.L. [Edinburgh Univ. (UK). Dept. of Astronomy; Wolstencroft, R D [Royal Observatory, Edinburgh (UK); Williams, P M [United Kingdom Infrared Telescope Unit, Hilo, Hawaii (USA)

1984-07-15

Photometry and polarimetry in the JHK wavebands have now been obtained for 25 BL Lac objects. Several new objects have been monitored for periods of up to five days, and accumulated data is sufficient for a statistical analysis of polarization properties. The selection effects operating on this sample are examined first. A power-law spectrum is consistent with the spectra of all but three objects. A number of important new results are reported.

Grasping Beer Mugs: On the Dynamics of Alignment Effects Induced by Handled Objects

Science.gov (United States)

Bub, Daniel N.; Masson, Michael E. J.

2010-01-01

We examined automatic spatial alignment effects evoked by handled objects. Using color as the relevant cue carried by an irrelevant handled object aligned or misaligned with the response hand, responses to color were faster when the handle aligned with the response hand. Alignment effects were observed only when the task was to make a reach and…

Commercialization of Intellectual Property Objects in Nanoindustry as a Factor of Increasing the Competitiveness of the Russian Economy

Directory of Open Access Journals (Sweden)

Maksim Alekseevich Manyakin

2016-10-01

Full Text Available Formation and development of the sixth technological mode in the global economy leads to the search for new ways to enhance the competitiveness of products both on the domestic and on the world market. Commercialization of intellectual property (IP objects, created in the field of nanotechnology, can be a significant factor in ensuring the competitiveness of the country. The article gives the notion of nanoindustry IP objects’ commercialization as an economic category. The specificity of this process, which takes into account research intensity, capital intensity and interdisciplinary essence of nanotechnology, is disclosed. The basic problems of the IP objects’ commercialization in Russian nanotechnology sphere, as well as the conditions that ensure the effectiveness of this process are characterized. On the basis of analysis of foreign experience in the IP objects’ commercialization in nanoindustry five models of mechanisms managing this process, depending on the role of the state, have been identified. The necessity of reorientation of Russian model of nanoindustry development from a predominant state to the private one in conditions of the budget financing deficit is substantiated. Main directions of improving the process of commercialization of the IP objects created in the field of nanotechnology in Russia are identified.

Automatic Recognition of Object Names in Literature

Science.gov (United States)

Bonnin, C.; Lesteven, S.; Derriere, S.; Oberto, A.

2008-08-01

SIMBAD is a database of astronomical objects that provides (among other things) their bibliographic references in a large number of journals. Currently, these references have to be entered manually by librarians who read each paper. To cope with the increasing number of papers, CDS develops a tool to assist the librarians in their work, taking advantage of the Dictionary of Nomenclature of Celestial Objects, which keeps track of object acronyms and of their origin. The program searches for object names directly in PDF documents by comparing the words with all the formats stored in the Dictionary of Nomenclature. It also searches for variable star names based on constellation names and for a large list of usual names such as Aldebaran or the Crab. Object names found in the documents often correspond to several astronomical objects. The system retrieves all possible matches, displays them with their object type given by SIMBAD, and lets the librarian make the final choice. The bibliographic reference can then be automatically added to the object identifiers in the database. Besides, the systematic usage of the Dictionary of Nomenclature, which is updated manually, permitted to automatically check it and to detect errors and inconsistencies. Last but not least, the program collects some additional information such as the position of the object names in the document (in the title, subtitle, abstract, table, figure caption...) and their number of occurrences. In the future, this will permit to calculate the 'weight' of an object in a reference and to provide SIMBAD users with an important new information, which will help them to find the most relevant papers in the object reference list.

Very low-excitation Herbig-Haro objects

International Nuclear Information System (INIS)

Boehm, K.H.; Brugel, E.W.; Mannery, E.

1980-01-01

Spectrophotometric observations show that H-H 7 and H-H 11 belong to a class of very low-excitation Herbig-Haro objects of which H-H 47 has been the only known example. Typical properties include line flux ratios [N I] (lambda5198+lambda5200)/Hβ and [S II] lambda/6717/Hα, which are both considerably larger than 1, very strong [O I] and [C I] lines, as well as relatively faint [O II] lines. So far no shock-wave models are available for these low-excitation objects. H-H 7 and H-H 11 have electron densities which are lower by about one order of magnitude, and electron temperatures which are slightly lower than those for high-excitation objects like H-H 1 and H-H 2. H-H 11 has a filling factor of about 1, much higher than other H-H objects

Special boundedness properties in numerical initial value problems

KAUST Repository

Hundsdorfer, W.; Mozartova, A.; Spijker, M. N.

2011-01-01

boundedness properties of a special type. These boundedness properties are optimal, and distinguish themselves also from earlier boundedness results by being relevant to sublinear functionals, discrete maximum principles and preservation of nonnegativity

Nonnegative Matrix Factorizations Performing Object Detection and Localization

Directory of Open Access Journals (Sweden)

G. Casalino

2012-01-01

Full Text Available We study the problem of detecting and localizing objects in still, gray-scale images making use of the part-based representation provided by nonnegative matrix factorizations. Nonnegative matrix factorization represents an emerging example of subspace methods, which is able to extract interpretable parts from a set of template image objects and then to additively use them for describing individual objects. In this paper, we present a prototype system based on some nonnegative factorization algorithms, which differ in the additional properties added to the nonnegative representation of data, in order to investigate if any additional constraint produces better results in general object detection via nonnegative matrix factorizations.

Relevance-based control over visual attention is fast and interdependent with stimulus-driven capture

DEFF Research Database (Denmark)

Nordfang, Maria; Bundesen, Claus

2012-01-01

or distractor) was a color singleton, but the probability that the singleton was a target was just the same as the probability that a nonsingleton was a target. Participants showed significant effects of both feature contrast and task relevance. The probability of correctly reporting a singleton target...... that high local feature contrast attracts attention independently of task-relevance. Yet, recent studies have provided evidence that effects of task-irrelevant feature contrast interact with the task-relevance of the object in question (Nordfang, 2011). In a new experiment, display size was kept constant...... was significantly higher than the probability of reporting a nonsingleton target. The probability of correctly reporting a given target also was significantly higher for the displays with 2 targets and 6 distractors than for the 8-target displays, revealing selectivity based on task-relevance. This effect...

Guidance of Attention to Objects and Locations by Long-Term Memory of Natural Scenes

Science.gov (United States)

Becker, Mark W.; Rasmussen, Ian P.

2008-01-01

Four flicker change-detection experiments demonstrate that scene-specific long-term memory guides attention to both behaviorally relevant locations and objects within a familiar scene. Participants performed an initial block of change-detection trials, detecting the addition of an object to a natural scene. After a 30-min delay, participants…

Avoidance test with Enchytraeus albidus (Enchytraeidae): Effects of different exposure time and soil properties

International Nuclear Information System (INIS)

Amorim, Monica J.B.; Novais, Sara; Roembke, Joerg; Soares, Amadeu M.V.M.

2008-01-01

Enchytraeids are ecologically relevant soil species and are commonly used in standardized toxicity tests. Their rapid reaction to a chemical exposure can be used as a toxicological measurement endpoint that assesses the avoidance behavior. The objectives of this investigation were to determine the effects of soil properties on the avoidance behavior of Enchytraeus albidus and to optimize the duration of avoidance test. The avoidance tests included (1) exposures in OECD artificial soil with standard or modified properties (pH, clay or peat content), and (2) exposures to copper chloride, cadmium chloride, and to the organic pesticides dimethoate and phenmedipham for different time periods. Results showed that alteration of OECD soil constituents significantly affected the avoidance behavior of enchytraeids, and that the 48-h exposure was the optimal duration of the test. Consideration of soil properties is important for selecting appropriate experimental design and interpreting the results of the enchytraeid avoidance test. - Optimal duration of the avoidance tests with potworm Enchytraeus albidus is 48 h; soil properties can affect performance of the test species

The Relevance of Hegel's Logic

Directory of Open Access Journals (Sweden)

John W Burbidge

2007-12-01

Full Text Available Hegel defines his Logic as the science that thinks about thinking.nbsp; But when we interpret that work as outlining what happens when we reason we are vulnerable to Fregersquo;s charge of psychologism.nbsp; I use Hegelrsquo;s tripartite distinction among understanding, dialectical and speculative reason as operations of pure thought to suggest how thinking can work with objective concepts.nbsp; In the last analysis, however, our ability to move from the subjective contingency of representations and ideas to the pure concepts we think develops from mechanical memory, which separates sign from sense so hat we can focus simply on the latter.nbsp; By becoming aware of the connections that underlie our thinking processes we may be able to both move beyond the abstractions of symbolic logic and clarify what informal logicians call relevance.

Development of breeding objectives for beef cattle breeding ...

African Journals Online (AJOL)

Mnr J F Kluyts

However, to solve the simultaneous equations the ... The aggregate breeding value represents a fundamental concept, the breeding objective, which is ..... Two properties characterise a linear programming problem. The first is additivity, ...

Perception of the Relevance of Organic Chemistry in a German Pharmacy Students’ Course

Science.gov (United States)

Wehle, Sarah

2016-01-01

Objective. To investigate German pharmacy students’ attitudes toward the relevance of organic chemistry training in Julius Maximilian University (JMU) of Würzburg with regard to subsequent courses in the curricula and in later prospective career options. Methods. Surveys were conducted in the second-year organic chemistry course (50 participants) as well as during the third-year and fourth-year lecture cycle on medicinal and pharmaceutical chemistry (66 participants) in 2014. Results. Students’ attitudes were surprisingly consistent throughout the progress of the degree course. Students considered organic chemistry very relevant to the pharmacy study program (95% junior and 97% senior students), and of importance for their future pharmacy program (88% junior and 94% senior students). With regard to prospective career options, the perceived relevance was considerably lower and attitudes were less homogenous. Conclusions. German pharmacy students at JMU Würzburg consider organic chemistry of high relevance for medicinal chemistry and other courses in JMU’s pharmacy program. PMID:27170811

Perception of the Relevance of Organic Chemistry in a German Pharmacy Students' Course.

Science.gov (United States)

Wehle, Sarah; Decker, Michael

2016-04-25

Objective. To investigate German pharmacy students' attitudes toward the relevance of organic chemistry training in Julius Maximilian University (JMU) of Würzburg with regard to subsequent courses in the curricula and in later prospective career options. Methods. Surveys were conducted in the second-year organic chemistry course (50 participants) as well as during the third-year and fourth-year lecture cycle on medicinal and pharmaceutical chemistry (66 participants) in 2014. Results. Students' attitudes were surprisingly consistent throughout the progress of the degree course. Students considered organic chemistry very relevant to the pharmacy study program (95% junior and 97% senior students), and of importance for their future pharmacy program (88% junior and 94% senior students). With regard to prospective career options, the perceived relevance was considerably lower and attitudes were less homogenous. Conclusions. German pharmacy students at JMU Würzburg consider organic chemistry of high relevance for medicinal chemistry and other courses in JMU's pharmacy program.

Melatonin and male reproductive health: relevance of darkness and antioxidant properties.

Science.gov (United States)

Rocha, C S; Rato, L; Martins, A D; Alves, M G; Oliveira, P F

2015-01-01

The pineal hormone melatonin controls several physiological functions that reach far beyond the regulation of the circadian rhythm. Moreover, it can be produced in extra-pineal organs such as reproductive organs. The role of melatonin in the mammalian seasonal and circadian rhythm is well known. Nevertheless, its overall effect in male reproductive physiology remains largely unknown. Melatonin is a very powerful endogenous antioxidant that can also be exogenously taken safely. Interestingly, its antioxidant properties have been consistently reported to improve the male reproductive dysfunctions associated with pathological conditions and also with the exposure to toxicants. Nevertheless, the exact molecular mechanisms by which melatonin exerts its action in the male reproductive system remain a matter of debate. Herein, we propose to present an up-to-date overview of the melatonin effects in the male reproductive health and debate future directions to disclose possible sites of melatonin action in male reproductive system. We will discuss not only the role of melatonin during darkness and sleep but also the importance of the antioxidant properties of this hormone to male fertility. Since melatonin readily crosses the physiological barriers, such as the blood-testis barrier, and has a very low toxicity, it appears as an excellent candidate in the prevention and/or treatment of the multiple male reproductive dysfunctions associated with various pathologies.

Financial Indicators of Performance Measurement: Reality, Relevance and Distortion

OpenAIRE

Flavius-Andrei Guinea

2016-01-01

The main criticism brought to managers and to managerial accounting systems was the lack of emphasis on the return of the use of invested capital and the excessive focus on the efficiency of production processes. This fact forced the transition to a new view on the way of establishing the strategic objectives measured by financial indicators. The aim of this paper is to demonstrate, through case studies, the relevance and possibilities of manipulation of a series of indicators used for assess...

Concurrent object-oriented programming: The MP-Eiffel approach

OpenAIRE

Silva, Miguel Augusto Mendes Oliveira e

2004-01-01

This article evaluates several possible approaches for integrating concurrency into object-oriented programming languages, presenting afterwards, a new language named MP-Eiffel. MP-Eiffel was designed attempting to include all the essential properties of both concurrent and object-oriented programming with simplicity and safety. A special care was taken to achieve the orthogonality of all the language mechanisms, allowing their joint use without unsafe side-effects (such as inh...

Atmospheric Aerosol Properties and Climate Impacts

Science.gov (United States)

Chin, Mian; Kahn, Ralph A.; Remer, Lorraine A.; Yu, Hongbin; Rind, David; Feingold, Graham; Quinn, Patricia K.; Schwartz, Stephen E.; Streets, David G.; DeCola, Phillip;

Critical seeding density improves properties and translatability of self-assembling anatomically shaped knee menisci

Science.gov (United States)

Hadidi, Pasha; Yeh, Timothy C.; Hu, Jerry C.; Athanasiou, Kyriacos A.

2014-01-01

A recent development in the field of tissue engineering is the rise of all-biologic, scaffold-free engineered tissues. Since these biomaterials rely primarily upon cells, investigation of initial seeding densities constitutes a particularly relevant aim for tissue engineers. In this study, a scaffold-free method was used to create fibrocartilage in the shape of the rabbit knee meniscus. The objectives of this study were: (i) to determine the minimum seeding density, normalized by an area of 44 mm2, necessary for the self-assembling process of fibrocartilage to occur, (ii) examine relevant biomechanical properties of engineered fibrocartilage, such as tensile and compressive stiffness and strength, and their relationship to seeding density, and (iii) identify a reduced, or optimal, number of cells needed to produce this biomaterial. It was found that a decreased initial seeding density, normalized by the area of the construct, produced superior mechanical and biochemical properties. Collagen per wet weight, glycosaminoglycans per wet weight, tensile properties, and compressive properties were all significantly greater in the 5 million cells per construct group as compared to the historical 20 million cells per construct group. Scanning electron microscopy demonstrated that a lower seeding density results in a denser tissue. Additionally, the translational potential of the self-assembling process for tissue engineering was improved though this investigation, as fewer cells may be used in the future. The results of this study underscore the potential for critical seeding densities to be investigated when researching scaffold-free engineered tissues. PMID:25234157

Communicative, Educational, Pedagogical Objectives and Planning in Russian Language Teaching

Science.gov (United States)

Evtyugina, Alla A.; Hasanova, Irina I.; Kotova, Svetlana S.; Sokolova, Anastasia N.; Svetkina, Irina A.

2016-01-01

The relevance of the problem stems from the necessity to distinctly plan educational process and set the goals for successful mastering of Russian language by foreign students in Russian higher educational institutions. The article is aimed at defining the foreign students' objectives for Russian language training, allowing them to get involved…

Dynamic Effects of Self-Relevance and Task on the Neural Processing of Emotional Words in Context.

Science.gov (United States)

Fields, Eric C; Kuperberg, Gina R

2015-01-01

We used event-related potentials (ERPs) to examine the interactions between task, emotion, and contextual self-relevance on processing words in social vignettes. Participants read scenarios that were in either third person (other-relevant) or second person (self-relevant) and we recorded ERPs to a neutral, pleasant, or unpleasant critical word. In a previously reported study (Fields and Kuperberg, 2012) with these stimuli, participants were tasked with producing a third sentence continuing the scenario. We observed a larger LPC to emotional words than neutral words in both the self-relevant and other-relevant scenarios, but this effect was smaller in the self-relevant scenarios because the LPC was larger on the neutral words (i.e., a larger LPC to self-relevant than other-relevant neutral words). In the present work, participants simply answered comprehension questions that did not refer to the emotional aspects of the scenario. Here we observed quite a different pattern of interaction between self-relevance and emotion: the LPC was larger to emotional vs. neutral words in the self-relevant scenarios only, and there was no effect of self-relevance on neutral words. Taken together, these findings suggest that the LPC reflects a dynamic interaction between specific task demands, the emotional properties of a stimulus, and contextual self-relevance. We conclude by discussing implications and future directions for a functional theory of the emotional LPC.

Dynamic effects of self-relevance and task on the neural processing of emotional words in context

Directory of Open Access Journals (Sweden)

Eric C. Fields

2016-01-01

Full Text Available We used event-related potentials (ERPs to examine the interactions between task, emotion, and contextual self-relevance on processing words in social vignettes. Participants read scenarios that were in either third person (other-relevant or second person (self-relevant and we recorded ERPs to a neutral, pleasant, or unpleasant critical word. In a previously reported study (Fields & Kuperberg, 2012 with these stimuli, participants were tasked with producing a third sentence continuing the scenario. We observed a larger LPC to emotional words than neutral words in both the self-relevant and other-relevant scenarios, but this effect was smaller in the self-relevant scenarios because the LPC was larger on the neutral words (i.e., a larger LPC to self-relevant than other-relevant neutral words. In the present work, participants simply answered comprehension questions that did not refer to the emotional aspects of the scenario. Here we observed quite a different pattern of interaction between self-relevance and emotion: the LPC was larger to emotional versus neutral words in the self-relevant scenarios only, and there was no effect of self-relevance on neutral words. Taken together, these findings suggest that the LPC reflects a dynamic interaction between specific task demands, the emotional properties of a stimulus, and contextual self-relevance. We conclude by discussing implications and future directions for a functional theory of the emotional LPC.

INFRARED AND KINEMATIC PROPERTIES OF THE SUBSTELLAR OBJECT G 196-3 B

International Nuclear Information System (INIS)

Zapatero Osorio, M. R.; Caballero, J. A.; Rebolo, R.; Bihain, G.; Bejar, V. J. S.; Alvarez, C.

2010-01-01

We report unusual near- and mid-infrared photometric properties of G 196-3 B, the young substellar companion at 16'' from the active M2.5-type star G 196-3 A, using data taken with the IRAC and MIPS instruments onboard Spitzer. G 196-3 B shows markedly redder colors at all wavelengths from 1.6 up to 24 μm than expected for its spectral type, which is determined at L3 from optical and near-infrared spectra. We discuss various physical scenarios to account for its reddish nature and conclude that a low-gravity atmosphere with enshrouded upper atmospheric layers and/or a warm dusty disk/envelope provides the most likely explanations, the two of them consistent with an age in the interval 20-300 Myr. We also present new and accurate separate proper motion measurements for G 196-3 A and B confirming that both objects are gravitationally linked and share the same motion within a few mas yr -1 . After integration of the combined spectrophotometric spectral energy distributions, we obtain the result that the difference in the bolometric magnitudes of G 196-3 A and B is 6.15 ± 0.10 mag. Kinematic consideration of the Galactic space motions of the system for distances in the interval 15-30 pc suggests that the pair is a likely member of the Local Association and that it lies near the past positions of young star clusters like α Persei less than 85 Myr ago, where the binary might have originated. At these young ages, the mass of G 196-3 B would be in the range 12-25 M Jup , close to the frontier between planets and brown dwarfs.

Discovering relevance knowledge in data: a growing cell structures approach.

Science.gov (United States)

Azuaje, F; Dubitzky, W; Black, N; Adamson, K

2000-01-01

Both information retrieval and case-based reasoning systems rely on effective and efficient selection of relevant data. Typically, relevance in such systems is approximated by similarity or indexing models. However, the definition of what makes data items similar or how they should be indexed is often nontrivial and time-consuming. Based on growing cell structure artificial neural networks, this paper presents a method that automatically constructs a case retrieval model from existing data. Within the case-based reasoning (CBR) framework, the method is evaluated for two medical prognosis tasks, namely, colorectal cancer survival and coronary heart disease risk prognosis. The results of the experiments suggest that the proposed method is effective and robust. To gain a deeper insight and understanding of the underlying mechanisms of the proposed model, a detailed empirical analysis of the models structural and behavioral properties is also provided.

Quantum objects. Non-local correlation, causality and objective indefiniteness in the quantum world

International Nuclear Information System (INIS)

Jaeger, Gregg

2014-01-01

Presents interpretation of quantum mechanics, advances in quantum foundations and philosophy of quantum mechanics. Explains non-locality and its relationship to causality and probability in quantum theory. Displays foundational characteristics of quantum physic to understand conceptual origins of the unusual nature of quantum phenomena. Describes relationship of subsystems and space-time. Gives a careful review of existing views. Confronts the old approaches with recent results and approaches from quantum information theory. Delivers a clear and thorough analysis of the quantum events in the context of relativistic space-time, which impacts the problem of creating a theory of quantum gravity. Supplies a detailed discussion of non-local correlation within and beyond the bounds set by standard quantum mechanics, which impacts the foundations of information theory. Gives a detailed discussion of probabilistic causation (central to contemporary accounts of causation) in quantum mechanics and relativity. Leads a thorough discussion of the nature of ''quantum potentiality,'' the novel form of existence arising for the first time in quantum mechanics. This monograph identifies the essential characteristics of the objects described by current quantum theory and considers their relationship to space-time. In the process, it explicates the senses in which quantum objects may be consistently considered to have parts of which they may be composed or into which they may be decomposed. The book also demonstrates the degree to which reduction is possible in quantum mechanics, showing it to be related to the objective indefiniteness of quantum properties and the strong non-local correlations that can occur between the physical quantities of quantum subsystems. Careful attention is paid to the relationships among such property correlations, physical causation, probability, and symmetry in quantum theory. In this way, the text identifies and clarifies the conceptual grounds

Quantum objects. Non-local correlation, causality and objective indefiniteness in the quantum world

Energy Technology Data Exchange (ETDEWEB)

Jaeger, Gregg [Boston Univ., MA (United States). Natural Sciences and Mathematics

2014-07-01

Presents interpretation of quantum mechanics, advances in quantum foundations and philosophy of quantum mechanics. Explains non-locality and its relationship to causality and probability in quantum theory. Displays foundational characteristics of quantum physic to understand conceptual origins of the unusual nature of quantum phenomena. Describes relationship of subsystems and space-time. Gives a careful review of existing views. Confronts the old approaches with recent results and approaches from quantum information theory. Delivers a clear and thorough analysis of the quantum events in the context of relativistic space-time, which impacts the problem of creating a theory of quantum gravity. Supplies a detailed discussion of non-local correlation within and beyond the bounds set by standard quantum mechanics, which impacts the foundations of information theory. Gives a detailed discussion of probabilistic causation (central to contemporary accounts of causation) in quantum mechanics and relativity. Leads a thorough discussion of the nature of ''quantum potentiality,'' the novel form of existence arising for the first time in quantum mechanics. This monograph identifies the essential characteristics of the objects described by current quantum theory and considers their relationship to space-time. In the process, it explicates the senses in which quantum objects may be consistently considered to have parts of which they may be composed or into which they may be decomposed. The book also demonstrates the degree to which reduction is possible in quantum mechanics, showing it to be related to the objective indefiniteness of quantum properties and the strong non-local correlations that can occur between the physical quantities of quantum subsystems. Careful attention is paid to the relationships among such property correlations, physical causation, probability, and symmetry in quantum theory. In this way, the text identifies and clarifies the

Interdisciplinary approach to concept of the property

International Nuclear Information System (INIS)

Massunov, S.L.

1996-01-01

A new system of treatment of safety property is suggested. In general, property of ecological safety is determined as property of technical system (object) not to influence or allow no influence on length of life of living natural objects (people, flora, fauna) on account of health aggravation or increase of mortality

A toolbox and sample object perception data for equalization of natural images

Directory of Open Access Journals (Sweden)

Wilma A. Bainbridge

2015-12-01

Full Text Available For psychologists and neuroscientists, careful selection of their stimuli is essential, so that low-level visual features such as color or spatial frequency do not serve as confounds between conditions of interest. Here, we detail the Natural Image Statistical Toolbox, which allows scientists to measure, visualize, and control stimulus sets along a set of low-level visual properties. Additionally, we provide a set of object images varying along several perceptual object properties, including physical size and interaction envelope size (i.e., the space around an object transversed during an interaction, serving as a test-bed for the Natural Image Statistical Toolbox. This stimulus set is also a highly characterized set useful to psychology and neuroscience studies on object perception.

The Web-based Module of Changes in Objects

Science.gov (United States)

Triayomi, R.

2017-09-01

To understand the changes of substances contained in such a kind of substance and substance characteristics then need a deep study of the concept. In this concept is expected to understand the changes of objects such as substance type and substance characteristics. Types of substances and characteristics of substances through physical changes and chemical changes and means of separation consisting of two or more substances. The principle of separation of the mixture is based on differences in physical properties of its constituents, such as substances, particle size, melting point, boiling point, magnetic properties, solubility, and so forth. This study aims to produce a web-based module of changes in objects that are valid, practical, and have effectiveness of student learning outcomes and activities on natural science learning. The experiment was conducted on 30 children in South Sumatera. The case of the development of the learning module of change of the object is influenced by the child’s understanding of the concept. Expected to be adapted by world teachers.

Parsimonious relevance models

NARCIS (Netherlands)

Meij, E.; Weerkamp, W.; Balog, K.; de Rijke, M.; Myang, S.-H.; Oard, D.W.; Sebastiani, F.; Chua, T.-S.; Leong, M.-K.

2008-01-01

We describe a method for applying parsimonious language models to re-estimate the term probabilities assigned by relevance models. We apply our method to six topic sets from test collections in five different genres. Our parsimonious relevance models (i) improve retrieval effectiveness in terms of

Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

Energy Technology Data Exchange (ETDEWEB)

Wasywich, K M

1993-05-01

Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs.

Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

International Nuclear Information System (INIS)

Wasywich, K.M.

1993-05-01

Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs

Design and evaluation of a software for the objective and easy-to-read presentation of new drug properties to physicians.

Science.gov (United States)

Iordatii, Maia; Venot, Alain; Duclos, Catherine

2015-05-30

When new pharmaceutical products appear on the market, physicians need to know whether they are likely to be useful in their practices. Physicians currently obtain most of their information about the market release and properties of new drugs from pharmaceutical industry representatives. However, the official information contained in the summary of product characteristics (SPCs) and evaluation reports from health agencies, provide a more complete view of the potential value of new drugs, although they can be long and difficult to read. The main objective of this work was to design a prototype computer program to facilitate the objective appraisal of the potential value of a new pharmaceutical product by physicians. This prototype is based on the modeling of pharmaceutical innovations described in a previous paper. The interface was designed to allow physicians to develop a rapid understanding of the value of a new drug for their practices. We selected five new pharmaceutical products, to illustrate the function of this prototype. We considered only the texts supplied by national or international drug agencies at the time of market release. The perceived usability of the prototype was evaluated qualitatively, except for the System Usability Scale (SUS) score evaluation, by 10 physicians differing in age and medical background. The display is based on the various axes of the conceptual model of pharmaceutical innovations. The user can select three levels of detail when consulting this information (highly synthetic, synthetic and detailed). Tables provide a comparison of the properties of the new pharmaceutical product with those of existing drugs, if available for the same indication, in terms of efficacy, safety and ease of use. The interface was highly appreciated by evaluators, who found it easy to understand and suggested no other additions of important, internationally valid information. The mean System Usability Scale score for the 10 physicians was 82

Cost-Efficient Methods and Processes for Safety Relevant Embedded Systems (CESAR) - An Objective Overview

Science.gov (United States)

Jolliffe, Graham

For developing embedded safety critical systems, industrial companies have to face increasing complexity and variety coupled with increasing regulatory constraints, while costs, performances and time to market are constantly challenged. This has led to a profusion of enablers (new processes, methods and tools), which are neither integrated nor interoperable because they have been developed more or less independently (addressing only a part of the complexity: e.g. Safety) in the absence of internationally recognized open standards. CESAR has been established under ARTEMIS, the European Union's Joint Technology Initiative for research in embedded systems, with the aim to improve this situation and this pa-per will explain what CESAR's objectives are, how they are expected to be achieved and, in particular, how current best practice can ensure that safety engineering requirements can be met.

A Semiotic Framework for the Semantics of Digital Multimedia Learning Objects

DEFF Research Database (Denmark)

May, Michael

2007-01-01

The relevance of semiotics for extending multimedia description schemes will be shown relative to existing strategies for indexing and retrieval. The semiotic framework presented is intended to support a compositional semantics of flexible digital multimedia objects. Besides semiotics insights fr...... Formal Concept Analysis is utilized....

Object-based classification of global undersea topography and geomorphological features from the SRTM30_PLUS data

Science.gov (United States)

Dekavalla, Maria; Argialas, Demetre

2017-07-01

The analysis of undersea topography and geomorphological features provides necessary information to related disciplines and many applications. The development of an automated knowledge-based classification approach of undersea topography and geomorphological features is challenging due to their multi-scale nature. The aim of the study is to develop and evaluate an automated knowledge-based OBIA approach to: i) decompose the global undersea topography to multi-scale regions of distinct morphometric properties, and ii) assign the derived regions to characteristic geomorphological features. First, the global undersea topography was decomposed through the SRTM30_PLUS bathymetry data to the so-called morphometric objects of discrete morphometric properties and spatial scales defined by data-driven methods (local variance graphs and nested means) and multi-scale analysis. The derived morphometric objects were combined with additional relative topographic position information computed with a self-adaptive pattern recognition method (geomorphons), and auxiliary data and were assigned to characteristic undersea geomorphological feature classes through a knowledge base, developed from standard definitions. The decomposition of the SRTM30_PLUS data to morphometric objects was considered successful for the requirements of maximizing intra-object and inter-object heterogeneity, based on the near zero values of the Moran's I and the low values of the weighted variance index. The knowledge-based classification approach was tested for its transferability in six case studies of various tectonic settings and achieved the efficient extraction of 11 undersea geomorphological feature classes. The classification results for the six case studies were compared with the digital global seafloor geomorphic features map (GSFM). The 11 undersea feature classes and their producer's accuracies in respect to the GSFM relevant areas were Basin (95%), Continental Shelf (94.9%), Trough (88

Study about the relevance and the disclosure of biological assets of listed companies in BM&FBOVESPA

Directory of Open Access Journals (Sweden)

Luciana Holtz

2013-08-01

Full Text Available The main objective this article is to verify that the information content of biological assets disclosed in the financial statements are relevant and, the secondary objective perform content analysis of the notes verifying the compliance of information supplied by entities with CPC 29. The study sample was composed of publicly traded stock companies listed on the BM & FBOVESPA with data for the year 2010 and 2011. The empirical tests were conducted applying relevance models, using observations of 347 active companies characterizing a study model pooled ordinary least squares – POLS, including companies that have reported biological assets into account specific .The companies that had values of biological assets posted have had analyzed explanatory notes referring to this account. The results provide empirical evidence that the information content of biological assets disclosed by companies is not relevant to the sample. In relation the content analysis of the notes was checked a partial compliance of the standard, there is a disparity in the information disclosure practices by the companies analyzed, as well as an omission of items required by the standard. Can be inferred that loss of the relevance has occurred, in part, by the poor quality of the notes, which may make it difficult for outside users in interpreting the information disclosed.

Virtual classes: a powerful mechanism in object-oriented programming

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger

1989-01-01

The notions of class, subclass and virtual procedure are fairly well understood and recognized as some of the key concepts in object-oriented programming. The possibility of modifying a virtual procedure in a subclass is a powerful technique for specializing the general properties of the superclass....... In most object-oriented languages, the attributes of an object may be references to objects and (virtual) procedures. In Simula and BETA it is also possible to have class attributes. The power of class attributes has not yet been widely recognized. In BETA a class may also have virtual class attributes...

IMAGE QUALITY FORECASTING FOR SPACE OBJECTS

Directory of Open Access Journals (Sweden)

A. I. Altukhov

2013-05-01

Full Text Available The article deals with an approach to quality predicting of the space objects images, which can be used to plan optoelectronic systems of remote sensing satellites work programs. The proposed approach is based on evaluation of the optoelectronic equipment transfer properties and calculation of indexes images quality considering the influence of the orbital shooting conditions.

On the development of standardization methods for measuring the degree of graphitization of industrial materials, correlation of scientific characterization with the industrially relevant secondary properties of graphitic material

International Nuclear Information System (INIS)

Fitzer, E.; Koechling, K.H.

1984-01-01

The completed research roject comprised the development of standardization methods for measuring the degree of graphitization of industrial materials, the testing of characterization methods with regard to significance, the correlation of scientific characterization with industrially relevant material properties and the resultant modification of industrial processes for the manufacture of coke raw materials and graphitic materials. Also targeted within the scope of this project were the grouping of comparable characterization methods and the drawing up of unequivocal terminology for scientific and industrial-commercial usage, with both aims based on intensified national and international teamwork. (orig./WL) [de

Ecological aspects od electromagnetic irradiation effects of biological objects

International Nuclear Information System (INIS)

Volobuev, A.P.; Donnik, I.M.; Alekseenko, N.N.

2005-01-01

General description of electromagnetic field effects on biological objects depending on its frequency properties is stated in the paper. Basic principles of low frequency field effect (10 -1 -0 2 Hz) are detailed. General and specific regularities of biological objects response to a low frequency field on subcell, cell, and system levels were considered taking into account their functional state. (author)

Task relevance modulates successful retrieval effects during explicit and implicit memory tests.

Science.gov (United States)

Elman, Jeremy A; Shimamura, Arthur P

2011-05-01

The successful retrieval effect refers to greater activation for items identified as old compared to those identified as new. This effect is particularly apparent in the ventral posterior parietal cortex (vPPC), though its functional properties remain unclear. In two experiments, we assessed the activation for old and new items during explicit and implicit tests of memory. In Experiment 1, significant effects were observed during explicit recognition performance and during an implicit lexical decision task. In both tasks, determining mnemonic status provides relevant information to task goals. Experiment 2 included a second implicit task in which determining mnemonic status was not relevant (color discrimination task). In this case, vPPC activation did not distinguish between old and new items. These findings suggest that automatic or implicit processes can drive retrieval-related activation in the vPPC, though such processes are gated by stimulus relevancy and task goals. Copyright © 2011 Elsevier Inc. All rights reserved.

Utilization of steel, pulp and paper industry solid residues in forest soil amendment: relevant physicochemical properties and heavy metal availability.

Science.gov (United States)

Mäkelä, Mikko; Watkins, Gary; Pöykiö, Risto; Nurmesniemi, Hannu; Dahl, Olli

2012-03-15

Industrial residue application to soil was investigated by integrating granulated blast furnace or converter steel slag with residues from the pulp and paper industry in various formulations. Specimen analysis included relevant physicochemical properties, total element concentrations (HCl+HNO3 digestion, USEPA 3051) and chemical speciation of chosen heavy metals (CH3COOH, NH2OH·HCl and H2O2+H2O2+CH3COONH4, the BCR method). Produced matrices showed liming effects comparable to commercial ground limestone and included significant quantities of soluble vital nutrients. The use of converter steel slag, however, led to significant increases in the total concentrations of Cr and V. Subsequently, total Cr was attested to occur as Cr(III) by Na2CO3+NaOH digestion followed by IC UV/VIS-PCR (USEPA 3060A). Additionally, 80.6% of the total concentration of Cr (370 mg kg(-1), d.w.) occurred in the residual fraction. However, 46.0% of the total concentration of V (2470 mg kg(-1), d.w.) occurred in the easily reduced fraction indicating potential bioavailability. Copyright © 2011 Elsevier B.V. All rights reserved.

[Relevance of Personality Factors for Successful Vocational Rehabilitation].

Science.gov (United States)

Arling, V; Slavchova, V; Knispel, J; Spijkers, W

2016-02-01

The Main purpose of vocational rehabilitation is occupational reintegration of clients into the job market who have lost their job or whose job is threatened because of a handicap or chronicl illness. With regard to existing evidence for the relevance of personality factors for work performance and job achievement, the present study investigated the influence of participants' personality factors on a successful reintegration after a retraining program in a vocational training center over 2 years. A central research objective was to identify prognostic personality factors for successful vocational integration. In this longitudinal study 15 vocational training centers participated at 3 time points of measurement (T1, T2 and T3). Data gathering was based on rehabilitants' self-reports (standardized questionnaires: SVF, BSW, SPR, CSES) about personality aspects. First data collection started at the beginning (T1) and a second survey was conducted at the end of the training 2 years later (T2). Based on the data at measurement points T1 and T2, 4 prognostic models were computed (binary logistic regression analysis) and evaluated, examining the differenzial influence of several scales and items on direct reintegration after completing the vocational retraining and reintegration status 6 months later (T3). As expected, different variables turned out to be relevant for occupational integration at the end of the training program and 6 months later. Correspondingly other variables appeared to be relevant for occupational reintegration at T1 and at T2. At the end of the vocational training program, approximately 24% of the participants had a job. With respect to direct reintegration, regression analysis revealed that vocational self-efficacy (R(2)=0,175) and self-evaluation were relevant (R(2)=0,383). Approximately 70% of the participants had gotten a job 6 months later. Several stress coping strategies (R(2)=0,170), estimation of the own reintegration prognosis and aspects

A community of scholars or scholars of the community? A note on the limits of relevance.

Science.gov (United States)

Cox, K R

1984-09-01

Universities are increasingly expected to be accountable for the large sums of public money they spend. Universities in Australia are currently under pressure to turn out graduates who are technically trained for immediate entry into the work force. Universities are expected to teach knowledge and skills which are relevant to what the community needs now. If the universities accept such obligations of accountability and relevance, what are the implications for the university enterprise? Over the past decade, medical schools have attempted to spell out their purposes, writing their overall goals and then specific objectives to guide teaching in all departments. These lists of goals and objectives usually incorporate a strong orientation to meeting current community needs. One expression of these community needs is the call for 'Health for all by the year 2000', supported by all governments through the World Health Organization. Turning out graduates to provide community health care would be a relevant goal which an accountable medical school could hardly deny. What evidence is available about university responses to such needs?

On marginally resolved objects in optical interferometry

Science.gov (United States)

Lachaume, R.

2003-03-01

With the present and soon-to-be breakthrough of optical interferometry, countless objects shall be within reach of interferometers; yet, most of them are expected to remain only marginally resolved with hectometric baselines. In this paper, we tackle the problem of deriving the properties of a marginally resolved object from its optical visibilities. We show that they depend on the moments of flux distribution of the object: centre, mean angular size, asymmetry, and curtosis. We also point out that the visibility amplitude is a second-order phenomenon, whereas the phase is a combination of a first-order term, giving the location of the photocentre, and a third-order term, more difficult to detect than the visibility amplitude, giving an asymmetry coefficient of the object. We then demonstrate that optical visibilities are not a good model constraint while the object stays marginally resolved, unless observations are carried out at different wavelengths. Finally, we show an application of this formalism to circumstellar discs.

Engineering the object-relation database model in O-Raid

Science.gov (United States)

Dewan, Prasun; Vikram, Ashish; Bhargava, Bharat

1989-01-01

Raid is a distributed database system based on the relational model. O-raid is an extension of the Raid system and will support complex data objects. The design of O-Raid is evolutionary and retains all features of relational data base systems and those of a general purpose object-oriented programming language. O-Raid has several novel properties. Objects, classes, and inheritance are supported together with a predicate-base relational query language. O-Raid objects are compatible with C++ objects and may be read and manipulated by a C++ program without any 'impedance mismatch'. Relations and columns within relations may themselves be treated as objects with associated variables and methods. Relations may contain heterogeneous objects, that is, objects of more than one class in a certain column, which can individually evolve by being reclassified. Special facilities are provided to reduce the data search in a relation containing complex objects.

Aviation Impacts on Property Values and Management: The Case of Suvarnabhumi International Airport

Directory of Open Access Journals (Sweden)

Patcharin Limlomwongse Suksmith

2015-07-01

Full Text Available Many countries have developed policies and measures to deal with the external impact of aviation on the wider community. There is, however, often controversy and lack of acceptance of some measures, such as compensation, in the communities affected by aviation. Such measures are often felt to be ineffective and perceived as unfair. A clear and objective model for determining compensation would be helpful to reduce controversy. The objective of this study is therefore to examine the relationship between aviation impacts and property values in the case of Thailand's Suvarnabhumi Airport for application to the possible improvement of compensation packages. Multiple regression analysis was used to determine the relationship between five common impacts of aviation (safety, noise, scenery, air pollution, and traffic and property value change, with data from a survey of sample communities around the airport. The results, both for the overall neighborhood and for separate land used types, show that only noise and air pollution demonstrate significant negative relations with property value. The effect of noise drives a higher impact on property price than the effect of air pollution. The main contribution of this research is to improve developing country compensation models by applied measurement from regression analysis to identify factors with significant impacts, using property value change as proxy to measure the impact of the airport. For example, in the case of Thailand, a compensation model should consider noise and air pollution as the main factors rather than consider only noise contour area. The higher weight on noise should be designed to reflect land use types. Furthermore the market value of property loss should be taken into account when designing a compensation package. The survey and regression method used in this study can be adapted for finding relevant factors and suggesting appropriate compensation for other environmental and

Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics

Institute of Scientific and Technical Information of China (English)

Chao CHEN; Matthew C.BEARD; Jiang TANG; David C.BOBELA; Ye YANG; Shuaicheng LU; Kai ZENG; Cong GE; Bo YANG; Liang GAO; Yang ZHAO

2017-01-01

Antimony selenide (Sb2Se3) is a promising absorber material for thin film photovoltaics because of its attractive material,optical and electrical properties.In recent years,the power conversion efficiency (PCE) of Sb2Se3 thin film solar cells has gradually enhanced to 5.6％.In this article,we systematically studied the basic physical properties of Sb2Se3 such as dielectric constant,anisotropic mobility,carrier lifetime,diffusion length,defect depth,defect density and optical band tail states.We believe such a comprehensive characterization of the basic physical properties of Sb2Se3 lays a solid foundation for further optimization of solar device performance.

Use of the analytic hierarchy process to prioritize patient-relevant endpoints of antidepressant treatment

NARCIS (Netherlands)

van Manen, Jeanette Gabrielle; Hummel, J. Marjan; IJzerman, Maarten Joost; Volz, F.; Gerber, A.; Danner, M.

2010-01-01

OBJECTIVES: In deciding about coverage of new medical technology, multiple clinical outcomes are used to support reimbursement claims. Neither the real world value nor the relevance of these outcome measures for patients is systematically assessed. Hence, there is growing interest in the use of

Relevance Evaluation of a Master's Degree in Engineering in Peru

OpenAIRE

Miñán Ubillús, Erick Alexander; Díaz Puente, José

2012-01-01

A good engineering education has a direct impact on competitiveness and the development of a country. In the context of the increase and diversification of higher education, it is necessary to ensure not only the quality, but also the relevance of master?s programs in engineering; that is, to say the appropriateness of objectives and results to the needs and interests (national and regional) of program beneficiaries. After a literature review and interviews with experts, one should propose a ...

GuidosToolbox: universal digital image object analysis

Science.gov (United States)

Peter Vogt; Kurt Riitters

2017-01-01

The increased availability of mapped environmental data calls for better tools to analyze the spatial characteristics and information contained in those maps. Publicly available, userfriendly and universal tools are needed to foster the interdisciplinary development and application of methodologies for the extraction of image object information properties contained in...

A Multi-Objective Learning to re-Rank Approach to Optimize Online Marketplaces for Multiple Stakeholders

OpenAIRE

Nguyen, Phong; Dines, John; Krasnodebski, Jan

2017-01-01

Multi-objective recommender systems address the difficult task of recommending items that are relevant to multiple, possibly conflicting, criteria. However these systems are most often designed to address the objective of one single stakeholder, typically, in online commerce, the consumers whose input and purchasing decisions ultimately determine the success of the recommendation systems. In this work, we address the multi-objective, multi-stakeholder, recommendation problem involving one or ...

Academic training of nursing professionals and its relevance to the workplace 1

Science.gov (United States)

Ortega, Maria del Carmen Barbera; Cecagno, Diana; Llor, Ana Myriam Seva; de Siqueira, Hedi Crecencia Heckler; Montesinos, Maria José López; Soler, Loreto Maciá

2015-01-01

OBJECTIVE: to identify the training nursing professionals receive and its relevance to the workplace, as well as professional demand for continuous education. METHODOLOGY: this was a descriptive observational study using a questionnaire entitled "Training and Adaptation of the Nursing Professional to the Workplace" available at: http://enfermeriadocente.es for nursing professionals. RESULTS: 53.8% of nurses do not consider the training received to be relevant to the needs of the workplace and 94.2% reported that linking academic education to the workplace impacts on the quality of care provided. CONCLUSIONS: Nursing professionals think that continuous education needs to be adjusted to their jobs and careers. Education should be viewed as a continuum, which begins with training. PMID:26312632

Objective assessment of chromatic and achromatic pattern adaptation reveals the temporal response properties of different visual pathways.

Science.gov (United States)

Robson, Anthony G; Kulikowski, Janus J

2012-11-01

The aim was to investigate the temporal response properties of magnocellular, parvocellular, and koniocellular visual pathways using increment/decrement changes in contrast to elicit visual evoked potentials (VEPs). Static achromatic and isoluminant chromatic gratings were generated on a monitor. Chromatic gratings were modulated along red/green (R/G) or subject-specific tritanopic confusion axes, established using a minimum distinct border criterion. Isoluminance was determined using minimum flicker photometry. Achromatic and chromatic VEPs were recorded to contrast increments and decrements of 0.1 or 0.2 superimposed on the static gratings (masking contrast 0-0.6). Achromatic increment/decrement changes in contrast evoked a percept of apparent motion when the spatial frequency was low; VEPs to such stimuli were positive in polarity and largely unaffected by high levels of static contrast, consistent with transient response mechanisms. VEPs to finer achromatic gratings showed marked attenuation as static contrast was increased. Chromatic VEPs to R/G or tritan chromatic contrast increments were of negative polarity and showed progressive attenuation as static contrast was increased, in keeping with increasing desensitization of the sustained responses of the color-opponent visual pathways. Chromatic contrast decrement VEPs were of positive polarity and less sensitive to pattern adaptation. The relative contribution of sustained/transient mechanisms to achromatic processing is spatial frequency dependent. Chromatic contrast increment VEPs reflect the sustained temporal response properties of parvocellular and koniocellular pathways. Cortical VEPs can provide an objective measure of pattern adaptation and can be used to probe the temporal response characteristics of different visual pathways.

Remote viewing of objects

International Nuclear Information System (INIS)

Motin, J.D.; Reformatsky, I.A.; Sinitsyn, P.R.; Ivanov, N.M.; Ivanov, B.I.; Malakhov, I.K.

1979-01-01

An object in a nuclear power plant is viewed through a radiation-proof shield by means of an entrance lens, optic fibre bundle and exit lens. The optic fibre bundle being heated to ensure thermostabilization of its light conducting properties in the presence of ionising radiation. Heating is by an electric heating coil. Alternatively, heating may be by argon itself heated by an electric heating element, a coating of resistive heating material, or absorption of neutrons in the material of the fibres or a coating therefor. Viewing may be on a CRT screen. (author)

Remarks on Causative Verbs and Object Deletion in English

OpenAIRE

Onozuka, Hiromi

2007-01-01

Rappaport Hovav and Levin (1998) contend that result verbs disallow object deletion becauseof their lexical semantic properties. Their point is that the distinction between result verbs andmanner verbs with their different event structure representation constitutes the important factorwhich dictates the possibility of the variation of argument realization, of which object deletionrepresents one instance. Responding to their claim, Goldberg (2001) presents the evidencewhich mainly concerns the...

Correlating non-linear properties with spectral states of RXTE data: possible observational evidences for four different accretion modes around compact objects

Science.gov (United States)

Adegoke, Oluwashina; Dhang, Prasun; Mukhopadhyay, Banibrata; Ramadevi, M. C.; Bhattacharya, Debbijoy

2018-05-01

By analysing the time series of RXTE/PCA data, the non-linear variabilities of compact sources have been repeatedly established. Depending on the variation in temporal classes, compact sources exhibit different non-linear features. Sometimes they show low correlation/fractal dimension, but in other classes or intervals of time they exhibit stochastic nature. This could be because the accretion flow around a compact object is a non-linear general relativistic system involving magnetohydrodynamics. However, the more conventional way of addressing a compact source is the analysis of its spectral state. Therefore, the question arises: What is the connection of non-linearity to the underlying spectral properties of the flow when the non-linear properties are related to the associated transport mechanisms describing the geometry of the flow? This work is aimed at addressing this question. Based on the connection between observed spectral and non-linear (time series) properties of two X-ray binaries: GRS 1915+105 and Sco X-1, we attempt to diagnose the underlying accretion modes of the sources in terms of known accretion classes, namely, Keplerian disc, slim disc, advection dominated accretion flow and general advective accretion flow. We explore the possible transition of the sources from one accretion mode to others with time. We further argue that the accretion rate must play an important role in transition between these modes.

Towards brain-activity-controlled information retrieval: Decoding image relevance from MEG signals.

Science.gov (United States)

Kauppi, Jukka-Pekka; Kandemir, Melih; Saarinen, Veli-Matti; Hirvenkari, Lotta; Parkkonen, Lauri; Klami, Arto; Hari, Riitta; Kaski, Samuel

2015-05-15

We hypothesize that brain activity can be used to control future information retrieval systems. To this end, we conducted a feasibility study on predicting the relevance of visual objects from brain activity. We analyze both magnetoencephalographic (MEG) and gaze signals from nine subjects who were viewing image collages, a subset of which was relevant to a predetermined task. We report three findings: i) the relevance of an image a subject looks at can be decoded from MEG signals with performance significantly better than chance, ii) fusion of gaze-based and MEG-based classifiers significantly improves the prediction performance compared to using either signal alone, and iii) non-linear classification of the MEG signals using Gaussian process classifiers outperforms linear classification. These findings break new ground for building brain-activity-based interactive image retrieval systems, as well as for systems utilizing feedback both from brain activity and eye movements. Copyright © 2015 Elsevier Inc. All rights reserved.

A short review of the formation, stability, and cementing properties of natural zeolites

International Nuclear Information System (INIS)

Jacobsson, A.

1977-10-01

The buffer mass for embedding nuclear waste canisters way down in tunnels or bore holes must fulfil a number of requirements. A 10-15 percent (by weight) sodium bentonite and 85-90 percent quartz mass has been suggested. In most respects this buffer mass has excellent properties but its ion exchange capacity is moderate or low. For this reason zeolites have been suggested as an active component in the mass. The question has been, however, whether zeolites are chemically stable together with other minerals such as montmorillonite which still has to be used to give the buffer mass suitable plastic and permeable properties. It is the main object of this report to illustrate any behaviour of zeolites relevant to the problem of finding a suitable buffer mass. Analcime or analcite, phillipsite, chabazite and clinoptilolite have been suggested as possible components in our buffer mass. (author)

The detection of temporally defined objects does not require focused attention.

NARCIS (Netherlands)

Pinto, Y.; Olivers, C.N.L.; Theeuwes, J.

2008-01-01

Perceptual grouping is crucial to distinguish objects from their background. Recent studies have shown that observers can detect an object that does not have any unique qualities other than unique temporal properties. A crucial question is whether focused attention is needed for this type of

Becoming Scientific: Objectivity, Identity, and Relevance as Experienced by Graduate Students in Psychology

Directory of Open Access Journals (Sweden)

Jeffery Yen

2011-05-01

Full Text Available The adoption of a rigorous experimentalism in the discipline of psychology has imposed tight constraints on what can be asked in psychological research and what sorts of answers given. Over the course of psychology's history the interpretive agent has receded into the background to make way for a more concrete observation language and a mechanistic, functionalist description of mind and behavior. In this context of disciplinary loss and gain, how do psychology's fledgling practitioners—its graduate students—understand the significance of their own research efforts? In this paper, we present thematic and discursive analyses of interviews with a sample of psychology graduate students at a large, public, research university in North America. We explore the manner in which the imperatives of "objectivity," as applied to psychological research, serve paradoxically to enhance the validity of what students feel their research permits them to claim while reducing its personal and social significance. We look at how, in this compromise, students struggle to define their identities as scientists so as to allay doubts about the significance of their work. Their comments provide insight into how psychological knowledge is critically evaluated inside and outside the discipline, and how these two perspectives are dialectically related. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1102260

Object-based landslide detection in different geographic regions

Science.gov (United States)

Friedl, Barbara; Hölbling, Daniel; Eisank, Clemens; Blaschke, Thomas

2015-04-01

Landslides occur in almost all mountainous regions of the world and rank among the most severe natural hazards. In the last decade - according to the world disaster report 2014 published by the International Federation of Red Cross and Red Crescent Societies (IRFC) - more than 9.000 people were killed by mass movements, more than 3.2 million people were affected and the total amount of disaster estimated damage accounts to more than 1.700 million US dollars. The application of remote sensing data for mapping landslides can contribute to post-disaster reconstruction or hazard mitigation, either by providing rapid information about the spatial distribution and location of landslides in the aftermath of triggering events or by creating and updating landslide inventories. This is especially valid for remote and inaccessible areas, where information on landslides is often lacking. However, reliable methods are needed for extracting timely and relevant information about landslides from remote sensing data. In recent years, novel methods such as object-based image analysis (OBIA) have been successfully employed for semi-automated landslide mapping. Several studies revealed that OBIA frequently outperforms pixel-based approaches, as a range of image object properties (spectral, spatial, morphometric, contextual) can be exploited during the analysis. However, object-based methods are often tailored to specific study areas, and thus, the transferability to regions with different geological settings, is often limited. The present case study evaluates the transferability and applicability of an OBIA approach for landslide detection in two distinct regions, i.e. the island of Taiwan and Austria. In Taiwan, sub-areas in the Baichi catchment in the North and in the Huaguoshan catchment in the southern-central part of the island are selected; in Austria, landslide-affected sites in the Upper Salzach catchment in the federal state of Salzburg are investigated. For both regions

Relevance of Linear Stability Results to Enhanced Oil Recovery

Science.gov (United States)

Ding, Xueru; Daripa, Prabir

2012-11-01

How relevant can the results based on linear stability theory for any problem for that matter be to full scale simulation results? Put it differently, is the optimal design of a system based on linear stability results is optimal or even near optimal for the complex nonlinear system with certain objectives of interest in mind? We will address these issues in the context of enhanced oil recovery by chemical flooding. This will be based on an ongoing work. Supported by Qatar National Research Fund (a member of the Qatar Foundation).

Hygroscopic properties of oxalic acid and atmospherically relevant oxalates

Science.gov (United States)

Ma, Qingxin; He, Hong; Liu, Chang

2013-04-01

Oxalic acid and oxalates represent an important fraction of atmospheric organic aerosols, however, little knowledge about the hygroscopic behavior of these particles is known. In this study, the hygroscopic behavior of oxalic acid and atmospherically relevant oxalates (H2C2O4, (NH4)2C2O4, CaC2O4, and FeC2O4) were studied by Raman spectrometry and vapor sorption analyzer. Under ambient relative humidity (RH) of 10-90%, oxalic acid and these oxalates hardly deliquesce and exhibit low hygroscopicity, however, transformation between anhydrous and hydrated particles was observed during the humidifying and dehumidifying processes. During the water adsorption process, conversion of anhydrous H2C2O4, (NH4)2C2O4, CaC2O4, and FeC2O4 to their hydrated particles (i.e., H2C2O4·2H2O, (NH4)2C2O4·H2O, CaC2O4·H2O, and FeC2O4·2H2O) occurred at about 20% RH, 55% RH, 10% RH, and 75% RH, respectively. Uptake of water on hydrated Ca-oxalate and Fe-oxalate particles can be described by a multilayer adsorption isotherm. During the dehumidifying process, dehydration of H2C2O4·2H2O and (NH4)2C2O4·H2O occurred at 5% RH while CaC2O4·H2O and FeC2O4·2H2O did not undergo dehydration. These results implied that hydrated particles represent the most stable state of oxalic acid and oxalates in the atmosphere. In addition, the assignments of Raman shift bands in the range of 1610-1650 cm-1 were discussed according to the hygroscopic behavior measurement results.

Insect brains use image interpolation mechanisms to recognise rotated objects.

Directory of Open Access Journals (Sweden)

Adrian G Dyer

Full Text Available Recognising complex three-dimensional objects presents significant challenges to visual systems when these objects are rotated in depth. The image processing requirements for reliable individual recognition under these circumstances are computationally intensive since local features and their spatial relationships may significantly change as an object is rotated in the horizontal plane. Visual experience is known to be important in primate brains learning to recognise rotated objects, but currently it is unknown how animals with comparatively simple brains deal with the problem of reliably recognising objects when seen from different viewpoints. We show that the miniature brain of honeybees initially demonstrate a low tolerance for novel views of complex shapes (e.g. human faces, but can learn to recognise novel views of stimuli by interpolating between or 'averaging' views they have experienced. The finding that visual experience is also important for bees has important implications for understanding how three dimensional biologically relevant objects like flowers are recognised in complex environments, and for how machine vision might be taught to solve related visual problems.

Using the Markov chain Monte Carlo method to study the physical properties of GeV-TeV BL Lac objects

Science.gov (United States)

Qin, Longhua; Wang, Jiancheng; Yang, Chuyuan; Yuan, Zunli; Mao, Jirong; Kang, Shiju

2018-01-01

We fit the spectral energy distributions (SEDs) of 46 GeV-TeV BL Lac objects in the frame of leptonic one-zone synchrotron self-Compton (SSC) model and investigate the physical properties of these objects. We use the Markov chain Monte Carlo (MCMC) method to obtain the basic parameters, such as magnetic field (B), the break energy of the relativistic electron distribution (γ ^' }b), and the electron energy spectral index. Based on the modeling results, we support the following scenarios for GeV-TeV BL Lac objects. (1) Some sources have large Doppler factors, implying other radiation mechanism should be considered. (2) Compared with flat spectrum quasars (FSRQs), GeV-TeV BL Lac objects have weaker magnetic fields and larger Doppler factors, which cause the ineffective cooling and shift the SEDs to higher bands. Their jet powers are around 4.0 × 1045 erg s-1, compared with radiation power, 5.0 × 1042 erg s-1, indicating that only a small fraction of jet power is transformed into the emission power. (3) For some BL Lacs with large Doppler factors, their jet components could have two substructures, e.g., the fast core and the slow sheath. For most GeV-TeV BL Lacs, Kelvin-Helmholtz instabilities are suppressed by their higher magnetic fields, leading to micro-variability or intro-day variability in the optical bands. (4) Combined with a sample of FSRQs, an anti-correlation between the peak luminosity, Lpk, and the peak frequency, νpk, is obtained, favoring the blazar sequence scenario. In addition, an anti-correlation between the jet power, Pjet, and the break Lorentz factor, γb, also supports the blazar sequence.

Mathematical programming and financial objectives for scheduling projects

CERN Document Server

Kimms, Alf

2001-01-01

Mathematical Programming and Financial Objectives for Scheduling Projects focuses on decision problems where the performance is measured in terms of money. As the title suggests, special attention is paid to financial objectives and the relationship of financial objectives to project schedules and scheduling. In addition, how schedules relate to other decisions is treated in detail. The book demonstrates that scheduling must be combined with project selection and financing, and that scheduling helps to give an answer to the planning issue of the amount of resources required for a project. The author makes clear the relevance of scheduling to cutting budget costs. The book is divided into six parts. The first part gives a brief introduction to project management. Part two examines scheduling projects in order to maximize their net present value. Part three considers capital rationing. Many decisions on selecting or rejecting a project cannot be made in isolation and multiple projects must be taken fully into a...

Objective Lens Optimized for Wavefront Delivery, Pupil Imaging, and Pupil Ghosting

Science.gov (United States)

Olzcak, Gene

2009-01-01

An interferometer objective lens (or diverger) may be used to transform a collimated beam into a diverging or converging beam. This innovation provides an objective lens that has diffraction-limited optical performance that is optimized at two sets of conjugates: imaging to the objective focus and imaging to the pupil. The lens thus provides for simultaneous delivery of a high-quality beam and excellent pupil resolution properties.

What is a Planet?-Categorizing Objects

Science.gov (United States)

Lebofsky, Larry A.

2009-05-01

Observing, communicating, comparing, organizing, relating, and inferring are fundamental to scientific thinking processes. Teaching this way, rather than just teaching "the facts,” is also important for developing the critical thinking skills of our future generations of a scientifically literate society. Since the IAU started its discussions on a definition of a planet in 2005, I have been presenting a hands-on activity called "What is a Planet?” at the annual meeting of the DPS. This activity has been designed for short (20 minute) to long (two hour) presentations depending on the venue and the audience. This has been presented to elementary-grade students, middle school students, K-12 teachers, and scientists and educators. Depending on the amount of time available, I show students how people, as well as scientists group or categorize things such as plants and animals, cats and dog, etc. The students are then broken up into groups. Science is usually done by teams of scientists working together, not as individuals working alone. I assess their prior knowledge (how many planets, their names, their properties, etc.). They also do a hands-on group activity where they group/categorize ten spheres by their properties (size, color, etc.). Finally we discuss the process by which the IAU came up with a definition of a planet. I then discuss with them why some scientists, including myself, do not agree with this definition: as with the spheres, there may be more than one "right” answer. There are many ways to look at the properties of objects in the Solar System and group them into planets and other designations. This is the way that science should be done, to look at all of the properties of an object and categorize them in a meaningful way. There may be more than one right answer.

Study of ignition possibility, development and properties of self-sustaining nuclear chain reaction in the fuel-containing masses of the object “Ukryttya”

Directory of Open Access Journals (Sweden)

V. A. Babenko

2017-12-01

Full Text Available Main characteristic properties of ignition and development of self-sustaining nuclear chain reaction (SCR in the fuel-containing masses (FCM of the object “Ukryttya”, and also the main properties of SCR for a number of its typical essentially possible modes were studied. System of differential equations for the main physical quantities describing FCM was formulated. Numerical analysis and calculations according to this system show that the main possible modes of SCR are exponential growth of the neutron flux, mode of the solitary neutron flux burst of differing strength, and also mode of the neutron flux oscillations. Mode of the flux oscillations is of great interest and exhibits various properties. According to calculations, the neutron flux burst of extremely high strength appears to be possible under some likely and reasonable physical conditions in presence of the sufficient accumulation of fissile materials. But the most realistic and close to the experiment mode of SCR appears to be the mode of slow growth of the neutron flux progressively, as the system is flooded by water, and further subsequent transition into the mode of the neutron flux oscillations in the neighbourhood of the critical state.

Context based Coding of Quantized Alpha Planes for Video Objects

DEFF Research Database (Denmark)

Aghito, Shankar Manuel; Forchhammer, Søren

2002-01-01

In object based video, each frame is a composition of objects that are coded separately. The composition is performed through the alpha plane that represents the transparency of the object. We present an alternative to MPEG-4 for coding of alpha planes that considers their specific properties....... Comparisons in terms of rate and distortion are provided, showing that the proposed coding scheme for still alpha planes is better than the algorithms for I-frames used in MPEG-4....

Multi-agent system for Knowledge-based recommendation of Learning Objects

Directory of Open Access Journals (Sweden)

Paula Andrea RODRÍGUEZ MARÍN

2015-12-01

Full Text Available Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.

Structural Fluctuation and Thermophysical Properties of Molten II-VI Compounds

Science.gov (United States)

2003-01-01

The objectives of the project is to conduct ground-based experimental and theoretical research on the structural fluctuations and thermophysical properties of molten II-VI compounds to enhance the basic understanding of the existing flight experiments in microgravity materials science programs and to study the fundamental heterophase fluctuations phenomena in these melts by: 1) Conducting neutron scattering analysis and measuring quantitatively the relevant thermophysical properties of the II-VI melts such as viscosity, electrical conductivity, thermal diffusivity and density as well as the relaxation characteristics of these properties to advance the understanding of the structural properties and the relaxation phenomena in these melts and 2) Performing theoretical analyses on the melt systems to interpret the experimental results. All the facilities required for the experimental measurements have been procured, installed and tested. A relaxation phenomenon, which shows a slow drift of the measured thermal conductivity toward the equilibrium value after cooling of the sample, was observed for the first time. An apparatus based on the transient torque induced by a rotating magnetic field has been developed to determine the viscosity and electrical conductivity of semiconducting liquids. Viscosity measurements on molten tellurium showed similar relaxation behavior as the measured diffusivity. Neutron scattering experiments were performed on the HgTe and HgZnTe melts and the results on pair distribution showed better resolution than previous reported.

Multi-Objective Optimization of Managed Aquifer Recharge.

Science.gov (United States)

Fatkhutdinov, Aybulat; Stefan, Catalin

2018-04-27

This study demonstrates the utilization of a multi-objective hybrid global/local optimization algorithm for solving managed aquifer recharge (MAR) design problems, in which the decision variables included spatial arrangement of water injection and abstraction wells and time-variant rates of pumping and injection. The objective of the optimization was to maximize the efficiency of the MAR scheme, which includes both quantitative and qualitative aspects. The case study used to demonstrate the capabilities of the proposed approach is based on a published report on designing a real MAR site with defined aquifer properties, chemical groundwater characteristics as well as quality and volumes of injected water. The demonstration problems include steady-state and transient scenarios. The steady-state scenario demonstrates optimization of spatial arrangement of multiple injection and recovery wells, whereas the transient scenario was developed with the purpose of finding optimal regimes of water injection and recovery at a single location. Both problems were defined as multi-objective problems. The scenarios were simulated by applying coupled numerical groundwater flow and solute transport models: MODFLOW-2005 and MT3D-USGS. The applied optimization method was a combination of global - the Non-Dominated Sorting Genetic Algorithm (NSGA-2), and local - the Nelder-Mead Downhill Simplex search algorithms. The analysis of the resulting Pareto optimal solutions led to the discovery of valuable patterns and dependencies between the decision variables, model properties and problem objectives. Additionally, the performance of the traditional global and the hybrid optimization schemes were compared. This article is protected by copyright. All rights reserved.

The efficacy of chiropractic manipulation for back pain : Blinded review of relevant randomized clinical trials

NARCIS (Netherlands)

Assendelft, W. J J; Koes, B. W.; Van der Heijden, G. J M G; Bouter, L. M.

1992-01-01

Objective: To assess the efficacy of chiropractic for patients with back pain. Data Sources: Randomized clinical trials (RCTs) on spinal manipulation were identified with a Medline search (1966-1990), by citation tracking, and by manual examination of the relevant chiropractic reference systems

Probabilistic resident space object detection using archival THEMIS fluxgate magnetometer data

Science.gov (United States)

Brew, Julian; Holzinger, Marcus J.

2018-05-01

Recent progress in the detection of small space objects, at geosynchronous altitudes, through ground-based optical and radar measurements is demonstrated as a viable method. However, in general, these methods are limited to detection of objects greater than 10 cm. This paper examines the use of magnetometers to detect plausible flyby encounters with charged space objects using a matched filter signal existence binary hypothesis test approach. Relevant data-set processing and reduction of archival fluxgate magnetometer data from the NASA THEMIS mission is discussed in detail. Using the proposed methodology and a false alarm rate of 10%, 285 plausible detections with probability of detection greater than 80% are claimed and several are reviewed in detail.

Classifications of objects on hyperspectral images

DEFF Research Database (Denmark)

Kucheryavskiy, Sergey

. In the present work a classification method that combines classic image classification approach and MIA is proposed. The basic idea is to group all pixels and calculate spectral properties of the pixel group to be used further as a vector of predictors for calibration and class prediction. The grouping can...... be done with mathematical morphology methods applied to a score image where objects are well separated. In the case of small overlapping a watershed transformation can be applied to disjoint the objects. The method has been tested on several simulated and real cases and showed good results and significant...... improvements in comparison with a standard MIA approach. The results as well as method details will be reported....

Video Cases in Teacher Education: A review study on intended and achieved learning objectives by video cases

NARCIS (Netherlands)

Geerts, Walter; Van der Werff, Anne; Hummel, Hans; Van Geert, Paul

2014-01-01

This literature review focuses on the use of video cases in the education of preservice teachers as a means of achieving higher order learning objectives that are necessary for gaining situated knowledge. An overview of both intended and achieved learning objectives in relevant studies involving

Properties of spatial Cox process models

DEFF Research Database (Denmark)

Møller, Jesper

Probabilistic properties of Cox processes of relevance for statistical modelling and inference are studied. Particularly, we study the most important classes of Cox processes, including log Gaussian Cox processes, shot noise Cox processes, and permanent Cox processes. We consider moment properties...... and point process operations such as thinning, displacements, and superpositioning. We also discuss how to simulate specific Cox processes....

Nuclear Fuel Cycle Objectives

International Nuclear Information System (INIS)

2013-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property'. The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in member States, implementing organizations, academia and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series, and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be considered and the specific goals to be achieved at different stages of implementation, all of which are consistent with the Basic Principles

See it with feeling: affective predictions during object perception

Science.gov (United States)

Barrett, L.F.; Bar, Moshe

2009-01-01

People see with feeling. We ‘gaze’, ‘behold’, ‘stare’, ‘gape’ and ‘glare’. In this paper, we develop the hypothesis that the brain's ability to see in the present incorporates a representation of the affective impact of those visual sensations in the past. This representation makes up part of the brain's prediction of what the visual sensations stand for in the present, including how to act on them in the near future. The affective prediction hypothesis implies that responses signalling an object's salience, relevance or value do not occur as a separate step after the object is identified. Instead, affective responses support vision from the very moment that visual stimulation begins. PMID:19528014

Threat Assessment of Small Near-Earth Objects

Science.gov (United States)

Ryan, E.; Ryan, W.

2010-09-01

Researchers at the Magdalena Ridge Observatory’s (MRO) 2.4-meter telescope facility are in their third year of a program to derive physical characterization information on some of the smallest (less than 200 meters in diameter) objects in the Near-Earth Object (NEO) population. Tiny comets and asteroids are being discovered by survey programs on a routine basis, so targets available for study have been abundant. Our primary objective is to derive rotation rates for these objects, and to place the results in context with previous data to enhance our understanding of asteroid impact physics and better address the threat from NEOs having Earth-crossing orbits. Rotation rate can be used to infer internal structure, which is a physical property important to assessing the energy needed for object disruption or other forms of hazard mitigation. Since the existing database of rotational data derived from lightcurves of objects in this small size regime is sparse, collection of additional observational data is beneficial. Acquiring more knowledge about the physical nature of NEOs not only contributes to general scientific pursuits, but is important to planetary defense.

Concept of object-oriented intelligent support for nuclear reactor designing

International Nuclear Information System (INIS)

Yoshikawa, H.; Gofuku, A.

1991-01-01

A concept of object-oriented intelligent CAD/CAE environment is proposed for the conceptual designing of advanced nuclear reactor system. It is composed of (i) object-oriented frame-structure database which represents the hierarchical relationship of the composite elements of reactor core and the physical properties, and (ii) object-oriented modularization of the elementary calculation processes, which are needed for reactor core design analysis. As an example practise, an object-oriented frame structure is constructed for representing a 3D configuration of a special fuel element of a space reactor design, by using a general-purpose expert system shell ESHELL/X. (author)

Electronic structures and relevant physical properties of Ni2MnGa alloy films

International Nuclear Information System (INIS)

Kim, K. W.; Kim, J. B.; Huang, M. D.; Lee, N. N.; Lee, Y. P.; Kudryavtsev, Y. V.; Rhee, J. Y.

2004-01-01

The electronic structures and physical properties of the ordered and disordered Ni 2 MnGa alloy films were investigated in this study. Ordered and disordered Ni 2 MnGa alloy films were prepared by flash evaporation onto substrates maintained at 720 K and 150 K, respectively. The results show that the ordered films behave in nearly the same way as the bulk Ni 2 MnGa ferromagnetic shape-memory alloy, including the martensitic transformation at 200 K. It was also revealed that the film deposition onto substrates cooled by liquid nitrogen leads to the formation of a substantially-disordered or an amorphous phase which is not ferromagnetically ordered at room temperature. An annealing of such an amorphous film restores its crystallinity and also recovers the ferromagnetic order. It was also clarified how the structural disordering in the films influences the physical properties, including the loss of ferromagnetism in the disordered films, by performing electronic-structure calculations and a photoemission study.

THE MISSION ACCESSIBLE NEAR-EARTH OBJECTS SURVEY (MANOS): FIRST PHOTOMETRIC RESULTS

Energy Technology Data Exchange (ETDEWEB)

Thirouin, A.; Moskovitz, N.; Burt, B. [Lowell Observatory, 1400 W Mars Hill Rd, Flagstaff, AZ 86001 (United States); Binzel, R. P.; DeMeo, F. E.; Person, M. J. [Massachusetts Institute of Technology (MIT), 77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Christensen, E. [University of Arizona, Tucson, AZ (United States); Polishook, D. [Department of Earth and Planetary Science, Weizmann Institute, Herzl St 234, Rehovot, 7610001 (Israel); Thomas, C. A. [Planetary Science Institute (PSI), 1700 E Fort Lowell Road 106, Tucson, AZ 85719 (United States); Trilling, D.; Hinkle, M.; Avner, D. [Department of Physics and Astronomy, P.O. Box 6010, Northern Arizona University, Flagstaff AZ 86001 (United States); Willman, M. [University of Hawaii, Pukalani, HI 96788 (United States); Aceituno, F. J., E-mail: thirouin@lowell.edu [Instituto de Astrofísica de Andalucía (IAA-CSIC), Glorieta de la Astronomía, S/N, Granada, E-18008 (Spain)

2016-12-01

The Mission Accessible Near-Earth Objects Survey aims to physically characterize sub-km near-Earth objects (NEOs). We report the first photometric results from the survey that began in 2013 August. Photometric observations were performed using 1–4 m class telescopes around the world. We present rotational periods and light curve amplitudes for 86 sub-km NEOs, though in some cases only lower limits are provided. Our main goal is to obtain light curves for small NEOs (typically, sub-km objects) and estimate their rotational periods, light curve amplitudes, and shapes. These properties are used for a statistical study to constrain overall properties of the NEO population. A weak correlation seems to indicate that smaller objects are more spherical than larger ones. We also report seven NEOs that are fully characterized (light curve and visible spectra) as the most suitable candidates for a future human or robotic mission. Viable mission targets are objects fully characterized, with Δ v {sup NHATS} ≤ 12 km s{sup −1}, and a rotational period P  > 1 hr. Assuming a similar rate of object characterization as reported in this paper, approximately 1230 NEOs need to be characterized in order to find 100 viable mission targets.

THE MISSION ACCESSIBLE NEAR-EARTH OBJECTS SURVEY (MANOS): FIRST PHOTOMETRIC RESULTS

International Nuclear Information System (INIS)

Thirouin, A.; Moskovitz, N.; Burt, B.; Binzel, R. P.; DeMeo, F. E.; Person, M. J.; Christensen, E.; Polishook, D.; Thomas, C. A.; Trilling, D.; Hinkle, M.; Avner, D.; Willman, M.; Aceituno, F. J.

2016-01-01

The Mission Accessible Near-Earth Objects Survey aims to physically characterize sub-km near-Earth objects (NEOs). We report the first photometric results from the survey that began in 2013 August. Photometric observations were performed using 1–4 m class telescopes around the world. We present rotational periods and light curve amplitudes for 86 sub-km NEOs, though in some cases only lower limits are provided. Our main goal is to obtain light curves for small NEOs (typically, sub-km objects) and estimate their rotational periods, light curve amplitudes, and shapes. These properties are used for a statistical study to constrain overall properties of the NEO population. A weak correlation seems to indicate that smaller objects are more spherical than larger ones. We also report seven NEOs that are fully characterized (light curve and visible spectra) as the most suitable candidates for a future human or robotic mission. Viable mission targets are objects fully characterized, with Δ v NHATS  ≤ 12 km s −1 , and a rotational period P  > 1 hr. Assuming a similar rate of object characterization as reported in this paper, approximately 1230 NEOs need to be characterized in order to find 100 viable mission targets.

An unforgettable apple: memory and attention for forbidden objects.

Science.gov (United States)

Truong, Grace; Turk, David J; Handy, Todd C

2013-12-01

Are we humans drawn to the forbidden? From jumbo-sized soft drinks to illicit substances, the influence of prohibited ownership on subsequent demand has made this question a pressing one. We know that objects that we ourselves own have a heightened psychological saliency, relative to comparable objects that are owned by others, but do these kinds of effects extend from self-owned to "forbidden" objects? To address this question, we developed a modified version of the Turk shopping paradigm in which "purchased" items were assigned to various recipients. Participants sorted everyday objects labeled as "self-owned", "other-owned," and either "forbidden to oneself" (Experiment 1) or "forbidden to everyone" (Experiment 2). Subsequent surprise recognition memory tests revealed that forbidden objects with high (Experiment 1) but not with low (Experiment 2) self-relevance were recognized as well as were self-owned objects, and better than other-owned objects. In a third and final experiment, we used event-related potentials (ERPs) to determine whether self-owned and self-forbidden objects, which showed a common memory advantage, are in fact treated the same at a neurocognitive-affective level. We found that both object types were associated with enhanced cognitive analysis, relative to other-owned objects, as measured by the P300 ERP component. However, we also found that self-forbidden objects uniquely triggered an enhanced response preceding the P300, in an ERP component (the N2) that is sensitive to more rapid, affect-related processing. Our findings thus suggest that, whereas self-forbidden objects share a common cognitive signature with self-owned objects, they are unique in being identified more quickly at a neurocognitive level.

A method of constructing geo-object ontology in disaster system for prevention and decrease

Science.gov (United States)

Li, Bin; Liu, Jiping; Shi, Lihong; Wang, Zhenfeng

2009-10-01

A kind of formal system, which can express clearly a certain entity or information, is needed to express geographical concept. Besides, some rules explaining the interrelationship and action between different components are also required. Therefore, the conception of geo-object ontology is introduced. It is a shared formalization and display specification of conceptual knowledge system in the field of concrete application of spatial information science. It can constitute hierarchy structure, which derives from the concept classification system in the geographical area. Its concepts can be described by the property. Property sets can form a vector space with multi-dimensional characteristics. Geographic space is composed of different types of geographic entities. And its concept is formed by a series of geographic entities with the same properties and actions. Moreover, each of the geographic entities can be mapped to an object, and each object has its spatial property, time information and topology, semantic relationships associated with other objects. The biggest difference between ecumenical information ontology and geo-ontology is that the latter has the spatial characteristics. During the construction process of geo-object ontology, some important components, such as geographic type, spatial relation, spatial entity type and coordinates, time, should be included to make further research. Here, taking disaster as an example, by using Protégé and OWL, combined methods used by constructing the geo-object ontology in the form of being manual made by domanial experts and semi-automatic are investigated oriented to disaster to serve ultimately geographic information retrieval service driven by ontology.

The functional relevance of polyploidization in the skin.

Science.gov (United States)

Trakala, Marianna; Malumbres, Marcos

2014-02-01

Cell proliferation and differentiation are tightly coupled through the regulation of the cell division cycle. To preserve specific functional properties in differentiated cells, distinct variants of the basic mitotic cell cycle are used in various mammalian tissues, leading to the formation of polyploid cells. In this issue of Experimental Dermatology, Gandarillas and Freije discuss the evidences for polyploidization in keratinocytes, a process whose physiological relevance is now becoming evident. A better evaluation of these unconventional cell cycles is required not only to improve our understanding of the development and structure of the epidermis but also for future therapies against skin diseases. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Attitude importance and the accumulation of attitude-relevant knowledge in memory.

Science.gov (United States)

Holbrook, Allyson L; Berent, Matthew K; Krosnick, Jon A; Visser, Penny S; Boninger, David S

2005-05-01

People who attach personal importance to an attitude are especially knowledgeable about the attitude object. This article tests an explanation for this relation: that importance causes the accumulation of knowledge by inspiring selective exposure to and selective elaboration of relevant information. Nine studies showed that (a) after watching televised debates between presidential candidates, viewers were better able to remember the statements made on policy issues on which they had more personally important attitudes; (b) importance motivated selective exposure and selective elaboration: Greater personal importance was associated with better memory for relevant information encountered under controlled laboratory conditions, and manipulations eliminating opportunities for selective exposure and selective elaboration eliminated the importance-memory accuracy relation; and (c) people do not use perceptions of their knowledge volume to infer how important an attitude is to them, but importance does cause knowledge accumulation.

Measurement properties of continuous text reading performance tests.

Science.gov (United States)

Brussee, Tamara; van Nispen, Ruth M A; van Rens, Ger H M B

2014-11-01

Measurement properties of tests to assess reading acuity or reading performance have not been extensively evaluated. This study aims to provide an overview of the literature on available continuous text reading tests and their measurement properties. A literature search was performed in PubMed, Embase and PsycInfo. Subsequently, information on design and content of reading tests, study design and measurement properties were extracted using consensus-based standards for selection of health measurement instruments. Quality of studies, reading tests and measurement properties were systematically assessed using pre-specified criteria. From 2334 identified articles, 20 relevant articles were found on measurement properties of three reading tests in various languages: IReST, MNread Reading Test and Radner Reading Charts. All three reading tests scored high on content validity. Reproducibility studies (repeated measurements between different testing sessions) of the IReST and MNread of commercially available reading tests in different languages were missing. The IReST scored best on inter-language comparison, the MNread scored well in repeatability studies (repeated measurements under the same conditions) and the Radner showed good reproducibility in studies. Although in daily practice there are other continuous text reading tests available meeting the criteria of this review, measurement properties were described in scientific studies for only three of them. Of the few available studies, the quality and content of study design and methodology used varied. For testing existing reading tests and the development of new ones, for example in other languages, we make several recommendations, including careful description of patient characteristics, use of objective and subjective lighting levels, good control of working distance, documentation of the number of raters and their training, careful documentation of scoring rules and the use of Bland-Altman analyses or similar for

Object detection from images obtained through underwater turbulence medium

Science.gov (United States)

Furhad, Md. Hasan; Tahtali, Murat; Lambert, Andrew

2017-09-01

Imaging through underwater experiences severe distortions due to random fluctuations of temperature and salinity in water, which produces underwater turbulence through diffraction limited blur. Lights reflecting from objects perturb and attenuate contrast, making the recognition of objects of interest difficult. Thus, the information available for detecting underwater objects of interest becomes a challenging task as they have inherent confusion among the background, foreground and other image properties. In this paper, a saliency-based approach is proposed to detect the objects acquired through an underwater turbulent medium. This approach has drawn attention among a wide range of computer vision applications, such as image retrieval, artificial intelligence, neuro-imaging and object detection. The image is first processed through a deblurring filter. Next, a saliency technique is used on the image for object detection. In this step, a saliency map that highlights the target regions is generated and then a graph-based model is proposed to extract these target regions for object detection.

Overview of 9Cr steels properties for structural application in sodium fast reactors

International Nuclear Information System (INIS)

Cabet, Celine; Courouau, Jean-Louis; Dalle, France; Desgranges, Clara; Forest, Laurent; Martinelli, Laure; Sauzay, Maxime

2015-01-01

A research and development programme has been launched by CEA, EDF and AREVA for the choice and qualification of material for sodium fast reactor (SFR) structural components. The requirements on steam generator (SG) are demanding, with operating temperatures ranging from 240 deg. C to 530 deg. C in water/steam and in sodium for an extended design life of several decades. The selection of the SG materials is based on many characteristics: fabrication, welding, thermal properties, mechanical strength at low and high temperature, environmental resistance. 9%Cr steels which are relevant candidate alloys for different designs of SGs have been extensively studied in the past decade. The objective of this paper is to review some advances made at CEA on determining properties of the X10CrMoVNb9-1 steel (hereafter named 'grade 91'): welding, modelling of cyclic softening, modelling of long-term creep, compatibility with liquid sodium, corrosion in steam. (authors)

Comparative analysis of imaging configurations and objectives for Fourier microscopy.

Science.gov (United States)

Kurvits, Jonathan A; Jiang, Mingming; Zia, Rashid

2015-11-01

Fourier microscopy is becoming an increasingly important tool for the analysis of optical nanostructures and quantum emitters. However, achieving quantitative Fourier space measurements requires a thorough understanding of the impact of aberrations introduced by optical microscopes that have been optimized for conventional real-space imaging. Here we present a detailed framework for analyzing the performance of microscope objectives for several common Fourier imaging configurations. To this end, we model objectives from Nikon, Olympus, and Zeiss using parameters that were inferred from patent literature and confirmed, where possible, by physical disassembly. We then examine the aberrations most relevant to Fourier microscopy, including the alignment tolerances of apodization factors for different objective classes, the effect of magnification on the modulation transfer function, and vignetting-induced reductions of the effective numerical aperture for wide-field measurements. Based on this analysis, we identify an optimal objective class and imaging configuration for Fourier microscopy. In addition, the Zemax files for the objectives and setups used in this analysis have been made publicly available as a resource for future studies.

Semiconductor materials and their properties

NARCIS (Netherlands)

Reinders, Angelina H.M.E.; Verlinden, Pierre; van Sark, Wilfried; Freundlich, Alexandre; Reinders, Angele; Verlinden, Pierre; van Sark, Wilfried; Freundlich, Alexandre

2017-01-01

Semiconductor materials are the basic materials which are used in photovoltaic (PV) devices. This chapter introduces solid-state physics and semiconductor properties that are relevant to photovoltaics without spending too much time on unnecessary information. Usually atoms in the group of

Compact Objects in Astrophysics White Dwarfs, Neutron Stars and Black Holes

CERN Document Server

Camenzind, Max

2007-01-01

Compact objects are an important class of astronomical objects in current research. Supermassive black holes play an important role in the understanding of the formation of galaxies in the early Universe. Old white dwarfs are nowadays used to calibrate the age of the Universe. Mergers of neutron stars and black holes are the sources of intense gravitational waves which will be measured in the next ten years by gravitational wave detectors. Camenzind's Compact Objects in Astrophysics gives a comprehensive introduction and up-to-date overview about the physical processes behind these objects, covering the field from the beginning to most recent results, including all relevant observations. After a presentation of the taxonomy of compact objects, the basic principles of general relativity are given. The author then discusses in detail the physics and observations of white dwarfs and neutron stars (including the most recent equations of state for neutron star matter), the gravitational field of rapidly rotating c...

Evolution of the Petrophysical and Mineralogical Properties of Two Reservoir Rocks Under Thermodynamic Conditions Relevant for CO2 Geological Storage at 3 km Depth

International Nuclear Information System (INIS)

Rimmel, G.; Barlet-Gouedard, V.; Renard, F.

2010-01-01

Injection of carbon dioxide (CO 2 ) underground, for long-term geological storage purposes, is considered as an economically viable option to reduce greenhouse gas emissions in the atmosphere. The chemical interactions between supercritical CO 2 and the potential reservoir rock need to be thoroughly investigated under thermodynamic conditions relevant for geological storage. In the present study, 40 samples of Lavoux limestone and Adamswiller sandstone, both collected from reservoir rocks in the Paris basin, were experimentally exposed to CO 2 in laboratory autoclaves specially built to simulate CO 2 -storage-reservoir conditions. The two types of rock were exposed to wet supercritical CO 2 and CO 2 -saturated water for one month, at 28 MPa and 90 C, corresponding to conditions for a burial depth approximating 3 km. The changes in mineralogy and micro-texture of the samples were measured using X-ray diffraction analyses, Raman spectroscopy, scanning-electron microscopy, and energy-dispersion spectroscopy microanalysis. The petrophysical properties were monitored by measuring the weight, density, mechanical properties, permeability, global porosity, and local porosity gradients through the samples. Both rocks maintained their mechanical and mineralogical properties after CO 2 exposure despite an increase of porosity and permeability. Microscopic zones of calcite dissolution observed in the limestone are more likely to be responsible for such increase. In the sandstone, an alteration of the petro-fabric is assumed to have occurred due to clay minerals reacting with CO 2 . All samples of Lavoux limestone and Adamswiller sandstone showed a measurable alteration when immersed either in wet supercritical CO 2 or in CO 2 -saturated water. These batch experiments were performed using distilled water and thus simulate more severe conditions than using formation water (brine). (authors)

THE RELEVANCE OF THE PERFORMANCE INDICATORS IN ECONOMIC AND FINANCIAL DIAGNOSIS

Directory of Open Access Journals (Sweden)

MIRELA MONEA

2011-01-01

Full Text Available Each company must achieve the objectives to reach performance in order to survive on the market. The paper aims to present the concept of performance as is seen in economic literature, to discuss the relevance of the main performances indicators on economic and financial diagnosis, to answer the question what are the main indicators which reflect economic or financial performances: profit, profitability ratios, economic added value, investments return, liquidity, cash-flows, resources efficiency, productivity, others.

A Pareto analysis approach to assess relevant marginal CO{sub 2} footprint for petroleum products

Energy Technology Data Exchange (ETDEWEB)

Tehrani, Nejad M. Alireza, E-mail: alireza.tehraninejad@gmail.com

2015-07-15

Recently, linear programing (LP) models have been extended to track the marginal CO{sub 2} intensity of automotive fuels at the refinery gate. The obtained CO{sub 2} data are recommended for policy making because they capture the economic and environmental tensions as well as the processing effects related to oil products. However, they are proven to be extremely sensitive to small perturbations and therefore useless in practice. In this paper, we first investigate the theoretical reasons of this drawback. Then, we develop a multiple objective LP framework to assess relevant marginal CO{sub 2} footprints that preserve both defensibility and stability at a satisfactory level of acceptance. A case study illustrates this new methodology. - Highlights: • Refining LP models have limitations to provide useful marginal CO{sub 2} footprints. • A multi objective optimization framework is developed to assess relevant CO{sub 2} data. • Within a European Refinig industry, diesel is more CO{sub 2} intensive than gasoline.

Radioactive Waste Management Objectives

International Nuclear Information System (INIS)

2011-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way it achieves this objective is to issue publications in various series. Two of these series are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III, paragraph A.6, of the IAEA Statute, the IAEA safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are primarily written in a regulatory style, and are binding on the IAEA for its own activities. The principal users are Member State regulatory bodies and other national authorities. The IAEA Nuclear Energy Series consists of reports designed to encourage and assist research on, and development and practical application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia and politicians, among others. The information is presented in guides, reports on the status of technology and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The series complements the IAEA's safety standards, and provides detailed guidance, experience, good practices and examples on the five areas covered in the IAEA Nuclear Energy Series. The Nuclear Energy Basic Principles is the highest level publication in the IAEA Nuclear Energy Series and describes the rationale and vision for the peaceful uses of nuclear energy. It presents eight Basic Principles on which nuclear energy systems should be based to fulfil nuclear energy's potential to help meet growing global energy needs. The Nuclear Energy Series Objectives are the second level publications. They describe what needs to be

Development and assessment of learning objects about intramuscular medication administration

Directory of Open Access Journals (Sweden)

Lilian Mayumi Chinen Tamashiro

2014-10-01

Full Text Available OBJECTIVES: to develop and assess a learning object about intramuscular medication administration for nursing undergraduates and nurses.METHOD: a random, intentional and non-probabilistic sample was selected of nurses from a Brazilian social network of nursing and students from the Undergraduate Program at the University of São Paulo School of Nursing to serve as research subjects and assess the object.RESULTS: the participants, 8 nurses and 8 students, studied the object and answered an assessment instrument that included the following criteria: educational aspects (relevance of the theme, objectives and texts/hypertexts, interface of the environment (navigation, accessibility and screen design and didactic resources (interactivity and presentation of resources. In total, 128 significant answers were obtained, 124 (97% of which were positive, assessed as excellent and satisfactory, considered as a flexible, dynamic, objective resources that is appropriate to the nursing learning process.CONCLUSION: the educational technology shows a clear and easily understandable language and the teaching method could be applied in other themes, contributing to the education and training of nursing professionals, positively affecting nursing teaching, stimulating the knowledge, autonomous and independent learning, aligned with the new professional education requirements.

Land Application of Wastes: An Educational Program. Soil as a Treatment Medium - Module 3, Objectives, Script and Booklet.

Science.gov (United States)

Clarkson, W. W.; And Others

This module examines the basic properties of soil which have an influence on the success of land treatment of wastes. These relevant properties include soil texture, soil structure, permeability, infiltration, available water capacity, and cation exchange capacity. Biological, chemical and physical mechanisms work to remove and renovate wastes…

Automatic segmentation of colon glands using object-graphs.

Science.gov (United States)

Gunduz-Demir, Cigdem; Kandemir, Melih; Tosun, Akif Burak; Sokmensuer, Cenk

2010-02-01

Gland segmentation is an important step to automate the analysis of biopsies that contain glandular structures. However, this remains a challenging problem as the variation in staining, fixation, and sectioning procedures lead to a considerable amount of artifacts and variances in tissue sections, which may result in huge variances in gland appearances. In this work, we report a new approach for gland segmentation. This approach decomposes the tissue image into a set of primitive objects and segments glands making use of the organizational properties of these objects, which are quantified with the definition of object-graphs. As opposed to the previous literature, the proposed approach employs the object-based information for the gland segmentation problem, instead of using the pixel-based information alone. Working with the images of colon tissues, our experiments demonstrate that the proposed object-graph approach yields high segmentation accuracies for the training and test sets and significantly improves the segmentation performance of its pixel-based counterparts. The experiments also show that the object-based structure of the proposed approach provides more tolerance to artifacts and variances in tissues.

Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion, IV: Affinisol™ HPMC HME Polymers.

Science.gov (United States)

Gupta, Simerdeep Singh; Solanki, Nayan; Serajuddin, Abu T M

2016-02-01

Most cellulosic polymers cannot be used as carriers for preparing solid dispersion of drugs by hot melt extrusion (HME) due to their high melt viscosity and thermal degradation at high processing temperatures. Three HME-grade hydroxypropyl methylcelluloses, namely Affinisol™ HPMC HME 15 cP, Affinisol™ HPMC HME 100 cP, and Affinisol™ HPMC HME 4 M, have recently been introduced by The Dow Chemical Co. to enable the preparation of solid dispersion at lower and more acceptable processing temperatures. In the present investigation, physicochemical properties of the new polymers relevant to HME were determined and compared with that of Kollidon(®) VA 64. Powder X-ray diffraction (PXRD), modulated differential scanning calorimetry (mDSC), thermogravimetric analysis (TGA), moisture sorption, rheology, and torque analysis by melt extrusion were applied. PXRD and mDSC showed that the Affinisol™ polymers were amorphous in nature. According to TGA, the onset of degradation for all polymers was >220°C. The Affinisol™ polymers exhibited less hygroscopicity than Kollidon(®) VA 64 and another HPMC polymer, Methocel™ K100LV. The complex viscosity profiles of the Affinisol™ polymers as a function of temperature were similar. The viscosity of the Affinisol™ polymers was highly sensitive to the shear rate applied, and unlike Kollidon(®) VA 64, the viscosity decreased drastically when the angular frequency was increased. Because of the very high shear rate encountered during melt extrusion, Affinisol™ polymers showed capability of being extruded at larger windows of processing temperatures as compared to that of Kollidon(®) VA 64.

Making Deferred Taxes Relevant

NARCIS (Netherlands)

Brouwer, Arjan; Naarding, Ewout

2018-01-01

We analyse the conceptual problems in current accounting for deferred taxes and provide solutions derived from the literature in order to make International Financial Reporting Standards (IFRS) deferred tax numbers value-relevant. In our view, the empirical results concerning the value relevance of

Ecological origins of object salience: reward, uncertainty, aversiveness and novelty

Directory of Open Access Journals (Sweden)

Ali Ghazizadeh

2016-08-01

Full Text Available Among many objects around us, some of them are more salient than others (i.e., attract our attention automatically. Some objects may be inherently salient (e.g., brighter, but others may become salient by virtue of their ecological relevance through experience. However, the importance of ecological experience in guiding attention has not been studied systematically. To address this question, we let subjects (macaque monkeys view a large number of complex objects (>300, each experienced repeatedly (>5 days with rewarding, aversive or no outcome association (mere-perceptual exposure. Test of salience was done on separate days using free viewing with no outcome. We found that gaze was biased among the objects from the outset, affecting saccades to objects or fixations within objects. When the outcome was rewarding, gaze preference was stronger (i.e. positive for objects with larger or equal but uncertain rewards. The effects of aversive outcomes were variable. Gaze preference was positive for some outcome associations (e.g. airpuff, but negative for others (e.g. time-out, possibly due to differences in threat levels. Finally, novel objects attracted gaze, but mere perceptual exposure of objects reduced their salience (learned negative salience. Our results show that, in primates, object salience is strongly influenced by previous ecological experience and is supported by a large memory capacity. Owing to such learned salience, the capacity to rapidly choose important objects can grow during the entire life to promote biological fitness.

The mind in the object-Psychological valuation of materialized human expression.

Science.gov (United States)

Kreuzbauer, Robert; King, Dan; Basu, Shankha

2015-08-01

[Correction Notice: An Erratum for this article was reported in Vol 144(4) of Journal of Experimental Psychology: General (see record 2015-33206-002). In the article the labels on the X-axis of Figure 1 "Remove Variance" and "Preserve Variance" should be switched.] Symbolic material objects such as art or certain artifacts (e.g., fine pottery, jewelry) share one common element: The combination of generating an expression, and the materialization of this expression in the object. This explains why people place a much greater value on handmade over machine-made objects, and originals over duplicates. We show that this mechanism occurs when a material object's symbolic property is salient and when the creator (artist or craftsman) is perceived to have agency control over the 1-to-1 materialized expression in the object. Coactivation of these 2 factors causes the object to be perceived as having high value because it is seen as the embodied representation of the creator's unique personal expression. In 6 experiments, subjects rated objects in various object categories, which varied on the type of object property (symbolic, functional, aesthetic), the production procedure (handmade, machine-made, analog, digital) and the origin of the symbolic information (person or software). The studies showed that the proposed mechanism applies to symbolic, but not to functional or aesthetic material objects. Furthermore, they show that this specific form of symbolic object valuation could not be explained by various other related psychological theories (e.g., uniqueness, scarcity, physical touching, creative performance). Our research provides a universal framework that identifies a core mechanism for explaining judgments of value for one of our most uniquely human symbolic object categories. (c) 2015 APA, all rights reserved).

Is the Appropriateness of Emotions Culture-Dependent? The Relevance of Social Meaning

Directory of Open Access Journals (Sweden)

Welpinghus Anna

2018-02-01

Full Text Available This paper contributes to the question to what extent the socio-cultural context is relevant for the appropriateness of emotions, while appropriateness of an emotion means that the emotion entails a correct, or adequate, evaluation of its object. In a first step, two adequacy conditions for theories of emotions are developed: the first condition ensures that the socio-cultural context is not neglected: theories must allow for the fact that appropriateness often depends on the social meaning of the emotion’s particular object. The second condition rules out implausible forms of cultural determinism. In a second step, an account that meets both conditions is presented: the Acceptance within Social Context account.

Status of MAPA (Modular Accelerator Physics Analysis) and the Tech-X Object-Oriented Accelerator Library

Science.gov (United States)

Cary, J. R.; Shasharina, S.; Bruhwiler, D. L.

1998-04-01

The MAPA code is a fully interactive accelerator modeling and design tool consisting of a GUI and two object-oriented C++ libraries: a general library suitable for treatment of any dynamical system, and an accelerator library including many element types plus an accelerator class. The accelerator library inherits directly from the system library, which uses hash tables to store any relevant parameters or strings. The GUI can access these hash tables in a general way, allowing the user to invoke a window displaying all relevant parameters for a particular element type or for the accelerator class, with the option to change those parameters. The system library can advance an arbitrary number of dynamical variables through an arbitrary mapping. The accelerator class inherits this capability and overloads the relevant functions to advance the phase space variables of a charged particle through a string of elements. Among other things, the GUI makes phase space plots and finds fixed points of the map. We discuss the object hierarchy of the two libraries and use of the code.

Analytical expressions for thermophysical properties of solid and liquid tungsten relevant for fusion applications

Directory of Open Access Journals (Sweden)

P. Tolias

2017-12-01

Full Text Available The status of the literature is reviewed for several thermophysical properties of pure solid and liquid tungsten which constitute input for the modelling of intense plasma-surface interaction phenomena that are important for fusion applications. Reliable experimental data are analyzed for the latent heat of fusion, the electrical resistivity, the specific isobaric heat capacity, the thermal conductivity and the mass density from the room temperature up to the boiling point of tungsten as well as for the surface tension and the dynamic viscosity across the liquid state. Analytical expressions of high accuracy are recommended for these thermophysical properties that involved a minimum degree of extrapolations. In particular, extrapolations were only required for the surface tension and viscosity.

Theory of the property valuation + valuation of specific property in Prague 6

OpenAIRE

Wurst, David

2011-01-01

The objective of Bachelor thesis is the definition of basic terms and methods used in the property valuation and the subsequent valuation of specific property. The thesis is divided into theoretical and practical part. The theoretical part is devoted to (description) describing the basic terms and bases needed for the valuation and characteristics of the most widely used methods of property valuation. In the practical part is going to be made the valuation of the specific property by the comp...

Reasoning about objects using process calculus techniques

DEFF Research Database (Denmark)

Kleist, Josva

This thesis investigates the applicability of techniques known from the world of process calculi to reason about properties of object-oriented programs. The investigation is performed upon a small object-oriented language - The Sigma-calculus of Abadi and Cardelli. The investigation is twofold: We......-calculus turns out to be insufficient. Based on our experiences, we present a translation of a typed imperative Sigma-calculus, which looks promising. We are able to provide simple proofs of the equivalence of different Sigma-calculus objects using this translation. We use a labelled transition system adapted...... to the Sigma-calculus to investigate the use of process calculi techniques directly on the Sigma-calculus. The results obtained are of a fairly theoretical nature. We investigate the connection between the operational and denotaional semantics for a typed functional Sigma-calculus. The result is that Abadi...

The relevance of VGKC positivity in the absence of LGI1 and Caspr2 antibodies

NARCIS (Netherlands)

Sonderen, A. van; Schreurs, M.W.; Bruijn, M.A.A.M. de; Boukhrissi, S.; Nagtzaam, M.M.; Hulsenboom, E.S.; Enting, R.H.; Thijs, R.D.; Wirtz, P.W.; Smitt, P.A. Sillevis; Titulaer, M.J.

2016-01-01

OBJECTIVE: To assess the clinical relevance of a positive voltage-gated potassium channel (VGKC) test in patients lacking antibodies to LGI1 and Caspr2. METHODS: VGKC-positive patients were tested for LGI1 and Caspr2 antibodies. Patients lacking both antibodies were matched (1:2) to VGKC-negative

The relevance of VGKC positivity in the absence of LGI1 and Caspr2 antibodies

NARCIS (Netherlands)

van Sonderen, Agnes; Schreurs, Marco W. J.; de Bruijn, Marienke A. A. M.; Boukhrissi, Sanae; Nagtzaam, Mariska M. P.; Hulsenboom, Esther S. P.; Enting, Roelien H.; Thijs, Roland D.; Wirtz, Paul W.; Smitt, Peter A. E. Sillevis; Titulaer, Maarten J.

2016-01-01

Objective: To assess the clinical relevance of a positive voltage-gated potassium channel (VGKC) test in patients lacking antibodies to LGI1 and Caspr2. Methods: VGKC-positive patients were tested for LGI1 and Caspr2 antibodies. Patients lacking both antibodies were matched (1: 2) to VGKC-negative

A knowledge discovery object model API for Java

Directory of Open Access Journals (Sweden)

Jones Steven JM

2003-10-01

Full Text Available Abstract Background Biological data resources have become heterogeneous and derive from multiple sources. This introduces challenges in the management and utilization of this data in software development. Although efforts are underway to create a standard format for the transmission and storage of biological data, this objective has yet to be fully realized. Results This work describes an application programming interface (API that provides a framework for developing an effective biological knowledge ontology for Java-based software projects. The API provides a robust framework for the data acquisition and management needs of an ontology implementation. In addition, the API contains classes to assist in creating GUIs to represent this data visually. Conclusions The Knowledge Discovery Object Model (KDOM API is particularly useful for medium to large applications, or for a number of smaller software projects with common characteristics or objectives. KDOM can be coupled effectively with other biologically relevant APIs and classes. Source code, libraries, documentation and examples are available at http://www.bcgsc.ca/bioinfo/software.

Development of a Wrapper Object, TRelap, for RELAP5 Code for Use in Object Oriented Programs

International Nuclear Information System (INIS)

Lee, Young Jin

2008-01-01

TRelap object class has been developed to enable object oriented programming techniques to be used where functionality of the RELAP5 thermal hydraulic system analysis code is needed. The TRelap is an object front for Dynamic Link Library (DLL) manifestation of the Relap5 code, Relap5.dll. In making the Relap5.dll, the top most structure of the RELAP5 was altered to enable the external calling procedures to control and the access the memory. The alteration was performed in such a way to allow the entire 'fa' and the f tb' memory spaces to be accessible to the calling procedure. Thus, any variable contained within the 'fa' array such as the parameters for the components, volumes, junctions, and heat structures can be accessed by the external calling procedure through TRelap. Various methods and properties to control the RELAP5 calculation and to access and manipulate the variables are built into the TRelap to enable easy manipulation. As a verification effort, a simple program was written to demonstrate the capability of the TRelap

Is nuclear structure relevant to non-mesonic hyper-nuclear weak decay?

International Nuclear Information System (INIS)

Wu, H.C.; Ponce, W.A.

2001-01-01

Full text: The focus of existing studies of the non-mesonic hypernuclear weak decay has been on the two-body process ΛN → NN, whereas the investigation on effects of nuclear structure is relatively rare. Some authors even assumed that the nuclear structure is irrelevant to the non mesonic hypernuclear weak decay. In this work we try to reveal the importance of nuclear structure in non mesonic weak decay of the Λ - hypernuclei through examining the relevance of many-body properties as well as the single particle properties of different nuclear models. For hypernucleus 12 Λ C, a comparison between the L-S coupling (realized by the symmetry model SU(4) x SU(3) and the j-j coupling (realized by the single particle shell model) gives an estimate of the range of nuclear structure effects. It has been found that while the total decay rate is almost independent of coupling schemes, the ratio Γn/Γp has a difference of around 30% between the two limits of many-body wave functions. There also exists a strong dependence of the total decay rate and the ratio Γn/Γp on the single particle properties of shell model, such as the binding energy of nucleon and the parameters of harmonic oscillator orbits, etc. Therefore, one may conclude that the nuclear structure is relevant to the non-mesonic hypernuclear weak decay. With the mechanism of ΛN → NN transition being restricted to one pion exchange (OPE) only, the consequences of possible contribution from the ΔI = 3/2 channel is investigated in a phenomenological manner. It has been shown that a mixing of ΔI = 3/2 channel will change the total decay rate as well as the ratio Γn/Γp considerably. (Author)

Challenges in Physical Characterization of Dim Space Objects: What Can We Learn from NEOs

Science.gov (United States)

Reddy, V.; Sanchez, J.; Thirouin, A.; Rivera-Valentin, E.; Ryan, W.; Ryan, E.; Mokovitz, N.; Tegler, S.

2016-09-01

Physical characterization of dim space objects in cis-lunar space can be a challenging task. Of particular interest to both natural and artificial space object behavior scientists are the properties beyond orbital parameters that can uniquely identify them. These properties include rotational state, size, shape, density and composition. A wide range of observational and non-observational factors affect our ability to characterize dim objects in cis-lunar space. For example, phase angle (angle between Sun-Target-Observer), temperature, rotational variations, temperature, and particle size (for natural dim objects). Over the last two decades, space object behavior scientists studying natural dim objects have attempted to quantify and correct for a majority of these factors to enhance our situational awareness. These efforts have been primarily focused on developing laboratory spectral calibrations in a space-like environment. Calibrations developed correcting spectral observations of natural dim objects could be applied to characterizing artificial objects, as the underlying physics is the same. The paper will summarize our current understanding of these observational and non-observational factors and present a case study showcasing the state of the art in characterization of natural dim objects.

A new object-oriented interface to MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; Fredian, T.; Stillerman, J.

2010-01-01

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

A new object-oriented interface to MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.i [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy); Fredian, T.; Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States)

2010-07-15

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

An object-based visual attention model for robotic applications.

Science.gov (United States)

Yu, Yuanlong; Mann, George K I; Gosine, Raymond G

2010-10-01

By extending integrated competition hypothesis, this paper presents an object-based visual attention model, which selects one object of interest using low-dimensional features, resulting that visual perception starts from a fast attentional selection procedure. The proposed attention model involves seven modules: learning of object representations stored in a long-term memory (LTM), preattentive processing, top-down biasing, bottom-up competition, mediation between top-down and bottom-up ways, generation of saliency maps, and perceptual completion processing. It works in two phases: learning phase and attending phase. In the learning phase, the corresponding object representation is trained statistically when one object is attended. A dual-coding object representation consisting of local and global codings is proposed. Intensity, color, and orientation features are used to build the local coding, and a contour feature is employed to constitute the global coding. In the attending phase, the model preattentively segments the visual field into discrete proto-objects using Gestalt rules at first. If a task-specific object is given, the model recalls the corresponding representation from LTM and deduces the task-relevant feature(s) to evaluate top-down biases. The mediation between automatic bottom-up competition and conscious top-down biasing is then performed to yield a location-based saliency map. By combination of location-based saliency within each proto-object, the proto-object-based saliency is evaluated. The most salient proto-object is selected for attention, and it is finally put into the perceptual completion processing module to yield a complete object region. This model has been applied into distinct tasks of robots: detection of task-specific stationary and moving objects. Experimental results under different conditions are shown to validate this model.

NEOSURVEY 1: INITIAL RESULTS FROM THE WARM SPITZER EXPLORATION SCIENCE SURVEY OF NEAR-EARTH OBJECT PROPERTIES

Energy Technology Data Exchange (ETDEWEB)

Trilling, David E.; Mommert, Michael [Department of Physics and Astronomy, PO Box 6010, Northern Arizona University, Flagstaff, AZ 86011 (United States); Hora, Joseph; Fazio, Giovanni; Smith, Howard [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, MS-65, Cambridge, MA 02138-1516 (United States); Chesley, Steve [Jet Propulsion Laboratory, California Institute of Technology, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Emery, Joshua [Department of Earth and Planetary Science, University of Tennessee, 306 EPS Building, 1412 Circle Drive, Knoxville, TN 37996 (United States); Harris, Alan [German Aerospace Center (DLR), Institute of Planetary Research, Rutherfordstrasse 2, 12489, Berlin (Germany); Mueller, Michael [SRON, Netherlands Institute for Space Research, PO Box 800, 9700AV Groningen (Netherlands)

2016-12-01

Near-Earth objects (NEOs) are small solar system bodies whose orbits bring them close to the Earth’s orbit. We are carrying out a Warm Spitzer Cycle 11 Exploration Science program entitled NEOSurvey—a fast and efficient flux-limited survey of 597 known NEOs in which we derive a diameter and albedo for each target. The vast majority of our targets are too faint to be observed by NEOWISE, though a small sample has been or will be observed by both observatories, which allows for a cross-check of our mutual results. Our primary goal is to create a large and uniform catalog of NEO properties. We present here the first results from this new program: fluxes and derived diameters and albedos for 80 NEOs, together with a description of the overall program and approach, including several updates to our thermal model. The largest source of error in our diameter and albedo solutions, which derive from our single-band thermal emission measurements, is uncertainty in η , the beaming parameter used in our thermal modeling; for albedos, improvements in solar system absolute magnitudes would also help significantly. All data and derived diameters and albedos from this entire program are being posted on a publicly accessible Web page at nearearthobjects.nau.edu.

NEOSURVEY 1: INITIAL RESULTS FROM THE WARM SPITZER EXPLORATION SCIENCE SURVEY OF NEAR-EARTH OBJECT PROPERTIES

International Nuclear Information System (INIS)

Trilling, David E.; Mommert, Michael; Hora, Joseph; Fazio, Giovanni; Smith, Howard; Chesley, Steve; Emery, Joshua; Harris, Alan; Mueller, Michael

2016-01-01

Near-Earth objects (NEOs) are small solar system bodies whose orbits bring them close to the Earth’s orbit. We are carrying out a Warm Spitzer Cycle 11 Exploration Science program entitled NEOSurvey—a fast and efficient flux-limited survey of 597 known NEOs in which we derive a diameter and albedo for each target. The vast majority of our targets are too faint to be observed by NEOWISE, though a small sample has been or will be observed by both observatories, which allows for a cross-check of our mutual results. Our primary goal is to create a large and uniform catalog of NEO properties. We present here the first results from this new program: fluxes and derived diameters and albedos for 80 NEOs, together with a description of the overall program and approach, including several updates to our thermal model. The largest source of error in our diameter and albedo solutions, which derive from our single-band thermal emission measurements, is uncertainty in η , the beaming parameter used in our thermal modeling; for albedos, improvements in solar system absolute magnitudes would also help significantly. All data and derived diameters and albedos from this entire program are being posted on a publicly accessible Web page at nearearthobjects.nau.edu.

Ranking Specific Sets of Objects.

Science.gov (United States)

Maly, Jan; Woltran, Stefan

2017-01-01

Ranking sets of objects based on an order between the single elements has been thoroughly studied in the literature. In particular, it has been shown that it is in general impossible to find a total ranking - jointly satisfying properties as dominance and independence - on the whole power set of objects. However, in many applications certain elements from the entire power set might not be required and can be neglected in the ranking process. For instance, certain sets might be ruled out due to hard constraints or are not satisfying some background theory. In this paper, we treat the computational problem whether an order on a given subset of the power set of elements satisfying different variants of dominance and independence can be found, given a ranking on the elements. We show that this problem is tractable for partial rankings and NP-complete for total rankings.

Object Toolkit Version 4.3 User’s Manual

Science.gov (United States)

2016-12-31

and with Nascap-2k. See the EPIC and Nascap-2k manuals for instructions. Most of the difficulties that users have encountered with Object Toolkit are...4/icond). 12.3 Importing Components From a NX I-DEAS TMG ASCII VUFF File Users of the NX I-DEAS TMG thermal analysis program can import the ASCII...2k user interface. The meaning of these properties is discussed in the Nascap-2k User’s Manual . Figure 36. Detector Properties Dialog Box. 15.5

A Nurse Communication Manager reduces the number of non‑relevant contacts

DEFF Research Database (Denmark)

Wright, Nana Keir; Seested Nielsen, Nina; Lauersen, Jannie

2015-01-01

Objective The aim of this study was to reduce interruptions in nursing practice by exploring the effects on the number of nonrelevant contacts received by the nursing staff after implementation of a Nurse Communication Manager. Design The study was designed as a pre/post interventional study. All...... in the surgical department. Interventions During the daytime a Nurse Communication Manager handled all incoming contacts irrespective of whether they were in person or by telephone. When the Nurse Communication Manager was not available and during the evening, night and weekends, telephone contacts were managed...... by an electronic Call Centre guiding the call to the care teams. Main outcome measure(s) The main outcome measures were the number of non-relevant contacts aimed at the nursing staff. Results Results showed a significant reduction in non-relevant contacts to the nursing staff from a mean of 80 contacts per day (SD...

Infrared polarimetry and photometry of BL Lac objects

Energy Technology Data Exchange (ETDEWEB)

Impey, C D; Brand, P W.J.L. [Edinburgh Univ. (UK); Wolstencroft, R D; Williams, P M [Royal Observatory, Edinburgh (UK)

1982-07-01

Infrared polarimetry and photometry have been obtained for a sample of 18 BL Lac objects. The data covers a period of one year and is part of a continuing monitoring programme; all observations were in the J,H and K wavebands. Large and variable degrees of polarization are a common property of the sample. Two BL Lac objects show wavelength-dependent polarization, with the polarization increasing towards shorter wavelengths, and two objects show evidence for position angle rotations over a five-day period. The relationship between changes in polarized and total flux is also discussed. The BL Lac objects cover an enormous range of infrared luminosity; the three most luminous having Lsub(IR) > 10/sup 46/ erg s/sup -1/ and the other end of the range having infrared luminosities similar to normal elliptical galaxies. These are the first published infrared polarimetric observations for eight of the sample.

Biophysical characterization of the Lactobacillus delbrueckii subsp. bulgaricus membrane during cold and osmotic stress and its relevance for cryopreservation.

Science.gov (United States)

Meneghel, Julie; Passot, Stéphanie; Dupont, Sébastien; Fonseca, Fernanda

2017-02-01

Freezing lactic acid bacteria often leads to cell death and loss of technological properties. Our objective was to provide an in-depth characterization of the biophysical properties of the Lactobacillus delbrueckii subsp. bulgaricus membrane in relation to its freeze resistance. Freezing was represented as a combination of cold and osmotic stress. This work investigated the relative incidence of increasing sucrose concentrations coupled or not with subzero temperatures without ice nucleation on the biological and biophysical responses of two strains with different membrane fatty acid compositions and freeze resistances. Following exposure of bacterial cells to the highest sucrose concentration, the sensitive strain exhibited a survival rate of less than 10 % and 5 h of acidifying activity loss. Similar biological activity losses were observed upon freeze-thawing and after osmotic treatment for each strain thus highlighting osmotic stress as the main source of cryoinjury. The direct measurement of membrane fluidity by fluorescence anisotropy was linked to membrane lipid organization characterized by FTIR spectroscopy. Both approaches made it possible to investigate the specific contributions of the membrane core and the bilayer external surface to cell degradation caused by cold and osmotic stress. Cold-induced membrane rigidification had no significant implication on bacterial freeze-thaw resistance. Interactions between extracellular sucrose and membrane phospholipid headgroups under osmotic stress were also observed. Such interactions were more evident in the sensitive strain and when increasing sucrose concentration, thus suggesting membrane permeabilization. The relevance of biophysical properties for elucidating mechanisms of cryoinjury and cryoprotection is discussed.

Is 'legal empowerment of the poor' relevant to people with disabilities in developing countries? An empirical and normative review.

Science.gov (United States)

Borg, Johan; Bergman, Anna-Karin; Östergren, Per-Olof

2013-11-15

Legal empowerment of the poor is highly relevant to public health as it aims to relieve income poverty, a main determinant of health. The Commission on Legal Empowerment of the Poor (CLEP) has proposed legal empowerment measures in the following four domains: access to justice and the rule of law, property, labor, and business rights. Despite being overrepresented among the poor, CLEP has not explicitly considered the situation of people with disabilities. To examine the empirical evidence for the relevance of the CLEP legal empowerment measures to people with disabilities in low- and lower middle-income countries, and to evaluate the extent to which the Convention on the Rights of Persons with Disabilities (CRPD) addresses those measures. Critical literature review of empirical studies and a checklist assessment of the CRPD. Fourteen included articles confirm that people with disabilities experience problems in the domains of access to justice and the rule of law, labor rights, and business rights. No texts on property rights were found. Evidence for the effectiveness of the proposed measures is insufficient. Overall, the CRPD fully or partially supports two-thirds of the proposed measures (seven out of nine measures for access to justice and the rule of law, none of the five measures for property rights, all seven measures for labor rights, and six out of nine measures for business rights). Although most of the domains of the CLEP legal empowerment measures are relevant to people with disabilities from both empirical and normative perspectives, it is uncertain whether the devised measures are of immediate relevance to them. Further research is warranted in this regard.

NATURE OF INTELLECTUAL PROPERTY RELATIONS AND ITS ROLE IN A PUBLIC REPRODUCTION

Directory of Open Access Journals (Sweden)

V. Virchenko

2013-08-01

Full Text Available Article is devoted to theoretical analysis of nature and structure of intellectual property relations. Types of intellectual property relations and its role in public reproduction are investigated. Peculiarities of intellectual property relations are considered. Two groups of approaches to classification of intellectual property objects are analysed: classification of objects depending on its characteristics which is based on the analysis of their most essential features, specificity of their protection, features of realisation of the property and non-property rights; classification on the basis of various minor criterions which do not reveal nature and character of objects but at the same time allow to divide them into groups according to concrete tasks of research. Necessity of defining of incorporeal objects of intellectual property which cannot be labelled as objects of copyright, industrial property or branding tools is proved. Criteria of classification of party’s to intellectual property relations are investigated. The subject structure of intellectual property relations according to the legislation of Ukraine is defined. New approaches to classification of party’s to intellectual property relations depending on their role in relations of intellectual property and their economic functions are offered, which allow to embrace as much as possible all participants of intellectual property relations, consider their role in the process of commercialisation, and draw attention to subjects which carry out regulating and mediatorial functions on the intellectual property market.

ExploreNEOs: The Warm Spitzer Near Earth Object Survey

NARCIS (Netherlands)

Trilling, D. E.; Hora, J. L.; Mueller, M.; Thomas, C. A.; Harris, A. W.; Hagen, A. R.; Mommert, M.; Benner, L.; Bhattacharya, B.; Bottke, W. F.; Chesley, S.; Delbo, M.; Emery, J. P.; Fazio, G.; Kistler, J. L.; Mainzer, A.; Morbidelli, A.; Penprase, B.; Smith, H. A.; Spahr, T. B.; Stansberry, J. A.

2012-01-01

We have observed some 600 near Earth objects (NEOs) at 3.6 and 4.5 microns with the Warm Spitzer Space Telescope. We derive the albedo and diameter for each NEO to characterize global properties of the NEO population, among other goals.

Discovering objects in a blood recipient information system.

Science.gov (United States)

Qiu, D; Junghans, G; Marquardt, K; Kroll, H; Mueller-Eckhardt, C; Dudeck, J

1995-01-01

Application of object-oriented (OO) methodologies has been generally considered as a solution to the problem of improving the software development process and managing the so-called software crisis. Among them, object-oriented analysis (OOA) is the most essential and is a vital prerequisite for the successful use of other OO methodologies. Though there are already a good deal of OOA methods published, the most important aspect common to all these methods: discovering objects classes truly relevant to the given problem domain, has remained a subject to be intensively researched. In this paper, using the successful development of a blood recipient information system as an example, we present our approach which is based on the conceptual framework of responsibility-driven OOA. In the discussion, we also suggest that it may be inadequate to simply attribute the software crisis to the waterfall model of the software development life-cycle. We are convinced that the real causes for the failure of some software and information systems should be sought in the methodologies used in some crucial phases of the software development process. Furthermore, a software system can also fail if object classes essential to the problem domain are not discovered, implemented and visualized, so that the real-world situation cannot be faithfully traced by it.

Non-invasive studies of objects from cultural heritage

International Nuclear Information System (INIS)

Lehmann, Eberhard H.; Vontobel, Peter; Deschler-Erb, Eckhard; Soares, Marie

2005-01-01

In order to preserve the objects from European cultural heritage in its structure and shape for our future generations, there is a need to perform all investigations on important samples non-destructively or with very limited amounts of material. Among the non-destructive testing (NDT) methods available for this purpose there are those that need large installations such as accelerators and reactors to provide different kinds of radiation (X-ray, protons, neutrons, gamma, etc.). Therefore, a link between the specialists working at such facilities with scientists from museums and archaeological institutes is necessary. This paper describes the status of a European network dedicated to the NDT of museum objects (COST-G8) as an overview. In more detail, the activities in Switzerland will be presented where PSI plays a role for the study with neutrons and X-rays. Most of the investigated samples of Swiss collections are from Celtic or Roman origin. The superposition of both applied methods gives the opportunity to decide about the structure of objects and artefacts from restoration work applied later to the virgin excavation status. The presented examples will give an overview about opportunities of the applied methods and their limitations in some cases. This should be motivating to adapt the demonstrated methods to other similar objects of historical relevance

Computational Modelling of the Neural Representation of Object Shape in the Primate Ventral Visual System

Directory of Open Access Journals (Sweden)

Akihiro eEguchi

2015-08-01

Full Text Available Neurons in successive stages of the primate ventral visual pathway encode the spatial structure of visual objects. In this paper, we investigate through computer simulation how these cell firing properties may develop through unsupervised visually-guided learning. Individual neurons in the model are shown to exploit statistical regularity and temporal continuity of the visual inputs during training to learn firing properties that are similar to neurons in V4 and TEO. Neurons in V4 encode the conformation of boundary contour elements at a particular position within an object regardless of the location of the object on the retina, while neurons in TEO integrate information from multiple boundary contour elements. This representation goes beyond mere object recognition, in which neurons simply respond to the presence of a whole object, but provides an essential foundation from which the brain is subsequently able to recognise the whole object.

Fluid Surface Deformation by Objects in the Cheerios Effect

Science.gov (United States)

Nguyen, Khoi; Miller, Michael; Mandre, Shreyas; Mandre Lab Team

2012-11-01

Small objects floating on a fluid/air interface deform of the surface depending on material surface properties, density, and geometry. These objects attract each other through capillary interactions, a phenomenon dubbed the ``cheerios effect.'' The attractive force and torque exerted on these objects by the interface can be estimated if the meniscus deformation is known. In addition, the floating objects can also rotate due to such an interaction. We present a series of experiments focused on visualizing the the motions of the floating objects and the deformation of the interface. The experiments involve thin laser-cut acrylic pieces attracting each other on water in a large glass petri dish and a camera set-up to capture the process. Furthermore, optical distortion of a grid pattern is used to visualize the water surface deformation near the edge of the objects. This study of the deformation of the water surface around a floating object, of the attractive/repulsive forces, and of post-contact rotational dynamics are potentially instrumental in the study of colloidal self-assembly.

Nonlinear waves in Bose–Einstein condensates: physical relevance and mathematical techniques

International Nuclear Information System (INIS)

Carretero-González, R; Frantzeskakis, D J; Kevrekidis, P G

2008-01-01

The aim of this review is to introduce the reader to some of the physical notions and the mathematical methods that are relevant to the study of nonlinear waves in Bose–Einstein condensates (BECs). Upon introducing the general framework, we discuss the prototypical models that are relevant to this setting for different dimensions and different potentials confining the atoms. We analyse some of the model properties and explore their typical wave solutions (plane wave solutions, bright, dark, gap solitons as well as vortices). We then offer a collection of mathematical methods that can be used to understand the existence, stability and dynamics of nonlinear waves in such BECs, either directly or starting from different types of limits (e.g. the linear or the nonlinear limit or the discrete limit of the corresponding equation). Finally, we consider some special topics involving more recent developments, and experimental setups in which there is still considerable need for developing mathematical as well as computational tools. (invited article)

The relevance of "non-relevant metabolites" from plant protection products (PPPs) for drinking water: the German view.

Science.gov (United States)

Dieter, Hermann H

2010-03-01

"Non-relevant metabolites" are those degradation products of plant protection products (PPPs), which are devoid of the targeted toxicities of the PPP and devoid of genotoxicity. Most often, "non-relevant metabolites" have a high affinity to the aquatic environment, are very mobile within this environment, and, usually, are also persistent. Therefore, from the point of drinking water hygiene, they must be characterized as "relevant for drinking water" like many other hydrophilic/polar environmental contaminants of different origins. "Non-relevant metabolites" may therefore penetrate to water sources used for abstraction of drinking water and may thus ultimately be present in drinking water. The presence of "non-relevant metabolites" and similar trace compounds in the water cycle may endanger drinking water quality on a long-term scale. During oxidative drinking water treatment, "non-relevant metabolites" may also serve as the starting material for toxicologically relevant transformation products similar to processes observed by drinking water disinfection with chlorine. This hypothesis was recently confirmed by the detection of the formation of N-nitroso-dimethylamine from ozone and dimethylsulfamide, a "non-relevant metabolite" of the fungicide tolylfluanide. In order to keep drinking water preferably free of "non-relevant metabolites", the German drinking water advisory board of the Federal Ministry of Health supports limiting their penetration into raw and drinking water to the functionally (agriculturally) unavoidable extent. On this background, the German Federal Environment Agency (UBA) recently has recommended two health related indication values (HRIV) to assess "non-relevant metabolites" from the view of drinking water hygiene. Considering the sometimes incomplete toxicological data base for some "non-relevant metabolites", HRIV also have the role of health related precautionary values. Depending on the completeness and quality of the toxicological

Development, relevance, and applications of 'atom-at-a-time' techniques

International Nuclear Information System (INIS)

Hoffman, D.C.

2012-01-01

A brief history of the development and some of the first uses of 'atom-at-a-time' techniques to investigate the chemical and nuclear properties of the actinide and transactinide elements are presented. The currently known transactinides (all elements with Z > 103) were discovered using physical (nuclear) techniques rather than chemical separation techniques because of their short half-lives and low production rates and the difficulty in accurately predicting chemical properties of the heaviest elements because of relativistic effects. Some of the constraints on systems suitable for such studies and whether these tracer-scale results can be extended to the macro-scale are discussed. The relevance and importance of the methods and their potential for application to some current problems such as nuclear forensics and proliferation and environmental concerns are considered. The value of graduate research utilizing such techniques in helping to attract and educate the next generation of nuclear scientists is highlighted. (author)

Birth of the Object: Detection of Objectness and Extraction of Object Shape through Object Action Complexes

DEFF Research Database (Denmark)

Kraft, Dirk; Pugeault, Nicolas; Baseski, Emre

2008-01-01

We describe a process in which the segmentation of objects as well as the extraction of the object shape becomes realized through active exploration of a robot vision system. In the exploration process, two behavioral modules that link robot actions to the visual and haptic perception of objects...... interact. First, by making use of an object independent grasping mechanism, physical control over potential objects can be gained. Having evaluated the initial grasping mechanism as being successful, a second behavior extracts the object shape by making use of prediction based on the motion induced...... system, knowledge about its own embodiment as well as knowledge about geometric relationships such as rigid body motion. This prior knowledge allows the extraction of representations that are semantically richer compared to many other approaches....

Location mortgage in accounting objects

Directory of Open Access Journals (Sweden)

I.M. Vygiska

2015-12-01

Full Text Available The article analyzes the mechanism of the implementation of all kinds of mortgage (mortgage, pledge, mortgage of securities, security of property rights, the mortgage of goods in circulation or processing, tax lien defined the specificity of receipt/return of the mortgage, particularly payments between mortgagor and the mortgagee. Determine the subject property entities that can act as mortgage; identified by their place in the system of objects of accounting mortgagor and the mortgagee. The peculiarities of the balance sheet and off-balance sheet assets as a reflection of your collateral. Identified two groups of mortgage transactions: transactions with mortgage for its receipt and transmission; business transactions related to the conditions of loan agreements (loan and mortgage. The results are shown in the research paper proposals allow for further research to develop mortgage organizational and methodological support the operations accounting for the effective management of financial resources and obligations, collateralised.

Pre-conceptual-schema-based patterns for deriving key performance indicators from strategic objectives

Directory of Open Access Journals (Sweden)

Carlos Mario Zapata Jaramillo

2017-05-01

Full Text Available Performance measurement is crucial for achieving business success. Moreover, such success is also related to the fulfillment of the organizational strategic objectives. Hence, an adequate determination of relevant performance indicators—or key performance indicators (KPIs—and their relationships to organizational objectives is needed. Even though several approaches for treating KPIs and objective-KPI relationships have been proposed, they exhibit some drawbacks associated with the lack of reusability and traceability. We attempt to fill this gap by proposing a set of patterns based on pre-conceptual schemas for supporting the systematic derivation of KPIs and their relationships to organizational objectives. In this way, the proposed patterns guarantee a reusable and traceable derivation process of a set of candidate KPIs from organizational strategic objectives. Lastly, we provide a lab study in order to illustrate the usefulness of this proposal.

Relevant Skills for Criminal Accounting Expertise: The Perception of Federal Police Experts and Delegates

Directory of Open Access Journals (Sweden)

Carlos Roberto dos Santos Filho

2017-03-01

Full Text Available This research aimed to identify which skills are considered most relevant to the practice of criminal accounting expertise in Brazil. As in international research, the skills perceived as most relevant were written communication, deductive analysis and critical thinking. Among the less relevant skills were the interview and the solution and negotiation of conflicts. In the second part, while experts and delegates jointly consider written communication to be the most present skills, delegates diverge from experts in terms of critical thinking and serenity. In addition, the respondents indicated skills that had not been investigated, and the most cited skills were proactivity, objectivity and updating. In the light of forensic accounting, the research method used was the survey, using a predefined questionnaire with open and closed questions, which 144 respondents answered. The study was divided into three parts: the first about the perceived relevance of the skills, the second about the perceived practical application of skills and the third part allowed the respondents to contribute with suggestions of skills that were considered relevant but did not figure among the skills investigated. The study contributes to the establishment of curricular guidelines for undergraduate and postgraduate courses related to the training of skills considered relevant for the training of future professionals and for the improvement of criminal accounting experts. Finally, we observe that the skills investigated and suggested can contribute to all areas of accounting expertise.

Online decoding of object-based attention using real-time fMRI.

Science.gov (United States)

Niazi, Adnan M; van den Broek, Philip L C; Klanke, Stefan; Barth, Markus; Poel, Mannes; Desain, Peter; van Gerven, Marcel A J

2014-01-01

Visual attention is used to selectively filter relevant information depending on current task demands and goals. Visual attention is called object-based attention when it is directed to coherent forms or objects in the visual field. This study used real-time functional magnetic resonance imaging for moment-to-moment decoding of attention to spatially overlapped objects belonging to two different object categories. First, a whole-brain classifier was trained on pictures of faces and places. Subjects then saw transparently overlapped pictures of a face and a place, and attended to only one of them while ignoring the other. The category of the attended object, face or place, was decoded on a scan-by-scan basis using the previously trained decoder. The decoder performed at 77.6% accuracy indicating that despite competing bottom-up sensory input, object-based visual attention biased neural patterns towards that of the attended object. Furthermore, a comparison between different classification approaches indicated that the representation of faces and places is distributed rather than focal. This implies that real-time decoding of object-based attention requires a multivariate decoding approach that can detect these distributed patterns of cortical activity. © 2013 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Synthesis and properties of bimetallic aluminium alkoxides

International Nuclear Information System (INIS)

Vyshinskaya, K.I.; Vasil'ev, G.A.; Vishnyakova, T.A.

1997-01-01

A single stage method of aluminium bimetallic alkoxide synthesis, which consists in activated aluminium reaction with metal salts in the relevant alcohols, has been developed. Properties of the compounds prepared are described

The Limits to Relevance

Science.gov (United States)

Averill, M.; Briggle, A.

2006-12-01

Science policy and knowledge production lately have taken a pragmatic turn. Funding agencies increasingly are requiring scientists to explain the relevance of their work to society. This stems in part from mounting critiques of the "linear model" of knowledge production in which scientists operating according to their own interests or disciplinary standards are presumed to automatically produce knowledge that is of relevance outside of their narrow communities. Many contend that funded scientific research should be linked more directly to societal goals, which implies a shift in the kind of research that will be funded. While both authors support the concept of useful science, we question the exact meaning of "relevance" and the wisdom of allowing it to control research agendas. We hope to contribute to the conversation by thinking more critically about the meaning and limits of the term "relevance" and the trade-offs implicit in a narrow utilitarian approach. The paper will consider which interests tend to be privileged by an emphasis on relevance and address issues such as whose goals ought to be pursued and why, and who gets to decide. We will consider how relevance, narrowly construed, may actually limit the ultimate utility of scientific research. The paper also will reflect on the worthiness of research goals themselves and their relationship to a broader view of what it means to be human and to live in society. Just as there is more to being human than the pragmatic demands of daily life, there is more at issue with knowledge production than finding the most efficient ways to satisfy consumer preferences or fix near-term policy problems. We will conclude by calling for a balanced approach to funding research that addresses society's most pressing needs but also supports innovative research with less immediately apparent application.

Structure, processing, and properties of potatoes

Science.gov (United States)

Lloyd, Isabel K.; Kolos, Kimberly R.; Menegaux, Edmond C.; Luo, Huy; McCuen, Richard H.; Regan, Thomas M.

1992-06-01

The objective of this experiment and lesson intended for high school students in an engineering or materials science course or college freshmen is to demonstrate the relation between processing, structure, and thermodynamic and physical properties. The specific objectives are to show the effect of structure and structural changes on thermodynamic properties (specific heat) and physical properties (compressive strength); to illustrate the first law of thermodynamics; to compare boiling a potato in water with cooking it in a microwave in terms of the rate of structural change and the energy consumed to 'process' the potato; and to demonstrate compression testing.

Structure, processing, and properties of potatoes

Science.gov (United States)

Lloyd, Isabel K.; Kolos, Kimberly R.; Menegaux, Edmond C.; Luo, Huy; Mccuen, Richard H.; Regan, Thomas M.

1992-01-01

The objective of this experiment and lesson intended for high school students in an engineering or materials science course or college freshmen is to demonstrate the relation between processing, structure, and thermodynamic and physical properties. The specific objectives are to show the effect of structure and structural changes on thermodynamic properties (specific heat) and physical properties (compressive strength); to illustrate the first law of thermodynamics; to compare boiling a potato in water with cooking it in a microwave in terms of the rate of structural change and the energy consumed to 'process' the potato; and to demonstrate compression testing.

A General Polygon-based Deformable Model for Object Recognition

DEFF Research Database (Denmark)

Jensen, Rune Fisker; Carstensen, Jens Michael

1999-01-01

We propose a general scheme for object localization and recognition based on a deformable model. The model combines shape and image properties by warping a arbitrary prototype intensity template according to the deformation in shape. The shape deformations are constrained by a probabilistic distr...

Objective and subjective quality assessment of geometry compression of reconstructed 3D Humans in a 3D virtual room

NARCIS (Netherlands)

R.N. Mekuria (Rufael); P.S. Cesar Garcia (Pablo Santiago); A. Frisiello (Antonella); I. Doumanis (Ioannis)

2015-01-01

htmlabstractCompression of 3D object based video is relevant for 3D Immersive applications. Nevertheless, the perceptual aspects of the degradation introduced by codecs for meshes and point clouds are not well understood. In this paper we evaluate the subjective and objective degradations introduced

Curriculum development for a national cardiotocography education program: a Delphi survey to obtain consensus on learning objectives.

Science.gov (United States)

Thellesen, Line; Hedegaard, Morten; Bergholt, Thomas; Colov, Nina P; Hoegh, Stinne; Sorensen, Jette L

2015-08-01

To define learning objectives for a national cardiotocography (CTG) education program based on expert consensus. A three-round Delphi survey. One midwife and one obstetrician from each maternity unit in Denmark were appointed based on CTG teaching experience and clinical obstetric experience. Following national and international guidelines, the research group determined six topics as important when using CTG: fetal physiology, equipment, indication, interpretation, clinical management, and communication/responsibility. In the first Delphi round, participants listed one to five learning objectives within the predefined topics. Responses were analyzed by a directed approach to content analysis. Phrasing was modified in accordance with Bloom's taxonomy. In the second and third Delphi rounds, participants rated each objective on a five-point relevance scale. Consensus was predefined as objectives with a mean rating value of ≥ 3. A prioritized list of CTG learning objectives. A total of 42 midwives and obstetricians from 21 maternity units were invited to participate, of whom 26 completed all three Delphi rounds, representing 18 maternity units. The final prioritized list included 40 objectives. The highest ranked objectives emphasized CTG interpretation and clinical management. The lowest ranked objectives emphasized fetal physiology. Mean ratings of relevance ranged from 3.15 to 5.00. National consensus on CTG learning objectives was achieved using the Delphi methodology. This was an initial step in developing a valid CTG education program. A prioritized list of objectives will clarify which topics to emphasize in a CTG education program. © 2015 Nordic Federation of Societies of Obstetrics and Gynecology.

Real-time object-oriented programming: studies and proposals

International Nuclear Information System (INIS)

Fouquier, Gilles

1996-01-01

This thesis contributes to the introduction of real-time features in object-oriented programming. Object-oriented programming favours modularity and reusability. Therefore, its application to real-time introduces many theoretical and conceptual problems. To deal with these problems, a new real-time object-oriented programming model is presented. This model is based on the active object model which allows concurrence and maintains the encapsulation property. The real-time aspect is treated by replacing the concept of task by the concept of method processing and by associating a real-time constraint to each message (priority or deadline). The set of all the running methods is scheduled. This model, called ATOME, contains several sub-models to deal with the usual concurrence control integrating their priority and deadline processing. The classical HPF and EDF scheduling avoid priority or deadline inversion. This model and its variants are new proposals to program real-time applications in the object-oriented way, therefore easing reusability and code writing. The feasibility of this approach is demonstrated by extending and existing active object-based language to real-time, in using the rules defined in the ATOME model. (author) [fr

Relevant problems in collaborative processes of non-hierarchical manufacturing networks

Directory of Open Access Journals (Sweden)

Beatriz Andrés

2013-07-01

Full Text Available Purpose: The purpose of this paper is to identify some of existing problems associated with collaboration among SMEs of the same network. Concretely, the problems are focused. The research objective is to identify the most relevant problems existing when SMEs have to deal with decentralized decisions (DDM. Design/methodology/approach: Through the literature review there have been collected collaborative problems caused by inter-organizational barriers. The approach taken is a qualitative study and analysis that classifies collaborative problems from less important to very important. In light of this, we are able to identify what are the most relevant problems to study in the NHN collaborative context. Findings and Originality/value: The developed methodology allows researchers to indentify amongst the collaborative problems those that are most relevant to solve in the NHN context, with the main aim of providing solutions in the future. The research aim is to provide the expert in the collaborative field a starting point to address the collaborative problems SMEs can find when belonging to collaborative networks. Research limitations/implications: Not all the problems that appear when an SME establish collaborative relationships, in a NHN, are considered. The identified problems have been arisen because there are discussed in the literature for addressing collaborative problems among networked partners. Identified problems are also considered because there are relevant to achieve collaboration among SMEs. Originality/value: The degree of coverage and the degree of significance is the taxonomy criteria used to identify the importance of solution degree of the encountered collaborative problems, in NHN context, in order to provide a future research of solutions to overcome them.

Object-Based Benefits without Object-Based Representations

OpenAIRE

Alvarez, George Angelo; Fougnie, Daryl; Cormiea, Sarah M

2012-01-01

The organization of visual information into objects strongly influences visual memory: Displays with objects defined by two features (e.g. color, orientation) are easier to remember than displays with twice as many objects defined by one feature (Olson & Jiang, 2002). Existing theories suggest that this ‘object-benefit’ is based on object-based limitations in working memory: because a limited number of objects can be stored, packaging features together so that fewer objects have to be remembe...

Classical methods for interpreting objective function minimization as intelligent inference

Energy Technology Data Exchange (ETDEWEB)

Golden, R.M. [Univ. of Texas, Dallas, TX (United States)

1996-12-31

Most recognition algorithms and neural networks can be formally viewed as seeking a minimum value of an appropriate objective function during either classification or learning phases. The goal of this paper is to argue that in order to show a recognition algorithm is making intelligent inferences, it is not sufficient to show that the recognition algorithm is computing (or trying to compute) the global minimum of some objective function. One must explicitly define a {open_quotes}relational system{close_quotes} for the recognition algorithm or neural network which identifies the: (i) sample space, (ii) the relevant sigmafield of events generated by the sample space, and (iii) the {open_quotes}relation{close_quotes} for that relational system. Only when such a {open_quotes}relational system{close_quotes} is properly defined, is it possible to formally establish the sense in which computing the global minimum of an objective function is an intelligent, inference.

New generation radioprotectors for personnel radiation protection in today 'Ukrytie' object conditions

International Nuclear Information System (INIS)

Senyuk, O.F.; Gorovoj, L.F.; Danilov, V.M.

2001-01-01

The peculiarities of radiation protection in conditions of modern 'Ukryttia' object depending on radiation situation are analyzed. It is underlined that the works inside the object are connected with high risk of radionuclide inhalation, especially of transuranium isotopes. It is shown the expedience of pharmacological protection of the persons working in extraordinary conditions of 'Ukryttia' object. The home-made biological preparation Mycoton is proposed as a remedy with simultaneous redistribution, antioxidant and adaptogenous properties

Nostalgia's place among self-relevant emotions.

Science.gov (United States)

van Tilburg, Wijnand A P; Wildschut, Tim; Sedikides, Constantine

2017-07-24

How is nostalgia positioned among self-relevant emotions? We tested, in six studies, which self-relevant emotions are perceived as most similar versus least similar to nostalgia, and what underlies these similarities/differences. We used multidimensional scaling to chart the perceived similarities/differences among self-relevant emotions, resulting in two-dimensional models. The results were revealing. Nostalgia is positioned among self-relevant emotions characterised by positive valence, an approach orientation, and low arousal. Nostalgia most resembles pride and self-compassion, and least resembles embarrassment and shame. Our research pioneered the integration of nostalgia among self-relevant emotions.

Retrospective Cues Based on Object Features Improve Visual Working Memory Performance in Older Adults

OpenAIRE

Gilchrist, Amanda L.; Duarte, Audrey; Verhaeghen, Paul

2015-01-01

Research with younger adults has shown that retrospective cues can be used to orient top-down attention toward relevant items in working memory. We examined whether older adults could take advantage of these cues to improve memory performance. Younger and older adults were presented with visual arrays of five colored shapes; during maintenance, participants were either presented with an informative cue based on an object feature (here, object shape or color) that would be probed, or with an u...

Inverse analyses of effective diffusion parameters relevant for a two-phase moisture model of cementitious materials

DEFF Research Database (Denmark)

Addassi, Mouadh; Johannesson, Björn; Wadsö, Lars

2018-01-01

Here we present an inverse analyses approach to determining the two-phase moisture transport properties relevant to concrete durability modeling. The purposed moisture transport model was based on a continuum approach with two truly separate equations for the liquid and gas phase being connected...... test, and, (iv) capillary suction test. Mass change over time, as obtained from the drying test, the two different cup test intervals and the capillary suction test, was used to obtain the effective diffusion parameters using the proposed inverse analyses approach. The moisture properties obtained...

Physicochemical properties and transport of steroids across Caco-2 cells

NARCIS (Netherlands)

Faassen, F.; Kelder, J.; Lenders, J.; Onderwater, R.; Vromans, H.

2003-01-01

Purpose. The purpose of this work was to study the relevant physicochemical properties for the absorption of steroids. Methods. Various physicochemical properties of steroids were calculated (molecular weight, ClogP, static polar surface area [PSA], etc.). Within this series of steroids, different

Object width modulates object-based attentional selection.

Science.gov (United States)

Nah, Joseph C; Neppi-Modona, Marco; Strother, Lars; Behrmann, Marlene; Shomstein, Sarah

2018-04-24

Visual input typically includes a myriad of objects, some of which are selected for further processing. While these objects vary in shape and size, most evidence supporting object-based guidance of attention is drawn from paradigms employing two identical objects. Importantly, object size is a readily perceived stimulus dimension, and whether it modulates the distribution of attention remains an open question. Across four experiments, the size of the objects in the display was manipulated in a modified version of the two-rectangle paradigm. In Experiment 1, two identical parallel rectangles of two sizes (thin or thick) were presented. Experiments 2-4 employed identical trapezoids (each having a thin and thick end), inverted in orientation. In the experiments, one end of an object was cued and participants performed either a T/L discrimination or a simple target-detection task. Combined results show that, in addition to the standard object-based attentional advantage, there was a further attentional benefit for processing information contained in the thick versus thin end of objects. Additionally, eye-tracking measures demonstrated increased saccade precision towards thick object ends, suggesting that Fitts's Law may play a role in object-based attentional shifts. Taken together, these results suggest that object-based attentional selection is modulated by object width.

Order-of-magnitude physics of neutron stars. Estimating their properties from first principles

Energy Technology Data Exchange (ETDEWEB)

Reisenegger, Andreas; Zepeda, Felipe S. [Pontificia Universidad Catolica de Chile, Instituto de Astrofisica, Facultad de Fisica, Macul (Chile)

2016-03-15

We use basic physics and simple mathematics accessible to advanced undergraduate students to estimate the main properties of neutron stars. We set the stage and introduce relevant concepts by discussing the properties of ''everyday'' matter on Earth, degenerate Fermi gases, white dwarfs, and scaling relations of stellar properties with polytropic equations of state. Then, we discuss various physical ingredients relevant for neutron stars and how they can be combined in order to obtain a couple of different simple estimates of their maximum mass, beyond which they would collapse, turning into black holes. Finally, we use the basic structural parameters of neutron stars to briefly discuss their rotational and electromagnetic properties. (orig.)

Francis Bacon's concept of objectivity and the idols of the mind.

Science.gov (United States)

Zagorin, P

2001-12-01

This paper examines the concept of objectivity traceable in Francis Bacon's natural philosophy. After some historical background on this concept, it considers the question of whether it is not an anachronism to attribute such a concept to Bacon, since the word 'objectivity' is a later coinage and does not appear anywhere in his writings. The essay gives reasons for answering this question in the negative, and then criticizes the accounts given of Bacon's understanding of objectivity by Lorraine Daston and Julie Robin Solomon. It argues that this understanding is most directly and fully expressed in his discussion of the idols of the mind. In this connection, the paper notes Bacon's critical attitude to sixteenth-century scepticism and its relevance to the idea of objectivity implicit in his comments on the idols. In conclusion, the paper argues that Bacon was not a pure empiricist and describes the place assigned to theories and hypotheses in his natural philosophy.

People's Judgments About Classic Property Law Cases.

Science.gov (United States)

DeScioli, Peter; Karpoff, Rachel

2015-06-01

People's judgments about property shape how they relate to other people with respect to resources. Property law cases can provide a valuable window into ownership judgments because disputants often use conflicting rules for ownership, offering opportunities to distinguish these basic rules. Here we report a series of ten studies investigating people's judgments about classic property law cases dealing with found objects. The cases address a range of issues, including the relativity of ownership, finder versus landowner rights, object location, objects below- versus above-ground, mislaid versus lost objects, contracts between landowners and finders, and the distinction between public and private space. The results show nuanced patterns in ownership judgments that are not well-explained by previous psychological theories. Also, people's judgments often conflict with court decisions and legal principles. These empirical patterns can be used to generate and test novel hypotheses about the intuitive logic of ownership.

Laboratory exercises to teach clinically relevant chemistry of antibiotics.

Science.gov (United States)

El Sayed, Khalid A; Chelette, Candace T

2014-03-12

To design, implement, and evaluate student performance on clinically relevant chemical and spectral laboratory exercises on antibiotics. In the first of 2 exercises, second-year pharmacy students enrolled in an integrated laboratory sequence course studied the aqueous stability of ß-lactam antibiotics using a spectral visual approach. In a second exercise, students studied the tendency of tetracycline, rifamycins, and fluoroquinolones to form insoluble chelate complexes (turbidity) with polyvalent metals. On a survey to assess achievement of class learning objectives, students agreed the laboratory activities helped them better retain important information concerning antibiotic stability and interactions. A significant improvement was observed in performance on examination questions related to the laboratory topics for 2012 and 2013 students compared to 2011 students who did not complete the laboratory. A 1-year follow-up examination question administered in a separate course showed >75% of the students were able to identify rifamycins-food interactions compared with laboratory exercises. The use of spectral visual approaches allowed students to investigate antibiotic stability and interactions, thus reinforcing the clinical relevance of medicinal chemistry. Students' performance on questions at the 1-year follow-up suggested increased retention of the concepts learned as a result of completing the exercises.

THE RELEVANCE OF MANAGEMENT ACCOUNTING FOR THE HOSPITALITY INDUSTRY

Directory of Open Access Journals (Sweden)

Briciu Sorin

2012-07-01

Full Text Available In the contemporary period the tourism and hospitality industry has experienced dynamic growth despite the challenges facing not only the global crisis, but also market changes, consumer behavior and technological trends. Accounting, the language of business is required to keep up with changes made to each particular area of activity so that they can provide timely relevant information to be managed by an efficient information system. Our article focuses on presenting the importance of management accounting and cost information system in the hospitality industry, then consider identifying features of this sector and their impact on accounting. The methodology of our research falls within the economic research, being theoretical, aiming primarily to knowledge objectives and the relevance of management accounting for economic entities, and then we have the characteristics of hospitality industry and possible organizational management accounting in this sector. In our perspective cost calculation for services, packages or travel benefits must take into account the development of the accounts from Class 9, so we propose a possible method to customize them according to the Direct Costing and CVP analysis. Our research will also be explanatory descriptive, trying to answer the questions How? and Why?

Coding the presence of visual objects in a recurrent neural network of visual cortex.

Science.gov (United States)