Value Relevance of Accounting Information in the United Arab Emirates

Directory of Open Access Journals (Sweden)

Jamal Barzegari Khanagha

2011-01-01

Full Text Available This paper examines the value relevance of accounting information in per and post-periods of International Financial Reporting Standards implementation using the regression and portfolio approaches for sample of the UAE companies. The results obtained from a combination of regression and portfolio approaches, show accounting information is value relevant in UAE stock market. A comparison of the results for the periods before and after adoption, based on both regression and portfolio approaches, shows a decline in value relevance of accounting information after the reform in accounting standards. It could be interpreted to mean that following to IFRS in UAE didn’t improve value relevancy of accounting information. However, results based on and portfolio approach shows that cash flows’ incremental information content increased for the post-IFRS period.

50 CFR 424.13 - Sources of information and relevant data.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Sources of information and relevant data... Sources of information and relevant data. When considering any revision of the lists, the Secretary shall..., administrative reports, maps or other graphic materials, information received from experts on the subject, and...

Alpha power gates relevant information during working memory updating.

Science.gov (United States)

Manza, Peter; Hau, Chui Luen Vera; Leung, Hoi-Chung

2014-04-23

Human working memory (WM) is inherently limited, so we must filter out irrelevant information in our environment or our mind while retaining limited important relevant contents. Previous work suggests that neural oscillations in the alpha band (8-14 Hz) play an important role in inhibiting incoming distracting information during attention and selective encoding tasks. However, whether alpha power is involved in inhibiting no-longer-relevant content or in representing relevant WM content is still debated. To clarify this issue, we manipulated the amount of relevant/irrelevant information using a task requiring spatial WM updating while measuring neural oscillatory activity via EEG and localized current sources across the scalp using a surface Laplacian transform. An initial memory set of two, four, or six spatial locations was to be memorized over a delay until an updating cue was presented indicating that only one or three locations remained relevant for a subsequent recognition test. Alpha amplitude varied with memory maintenance and updating demands among a cluster of left frontocentral electrodes. Greater postcue alpha power was associated with the high relevant load conditions (six and four dots cued to reduce to three relevant) relative to the lower load conditions (four and two dots reduced to one). Across subjects, this difference in alpha power was correlated with condition differences in performance accuracy. In contrast, no significant effects of irrelevant load were observed. These findings demonstrate that, during WM updating, alpha power reflects maintenance of relevant memory contents rather than suppression of no-longer-relevant memory traces.

76 FR 34075 - Request for Information (RFI) To Identify and Obtain Relevant Information From Public or Private...

Science.gov (United States)

2011-06-10

... Relevant Information From Public or Private Entities With an Interest in Biovigilance; Extension AGENCY... and obtain relevant information regarding the possible development of a public-private partnership... Identify and Obtain Relevant Information from Public or Private Entities with an Interest in Biovigilance...

Support Vector Machines: Relevance Feedback and Information Retrieval.

Science.gov (United States)

Drucker, Harris; Shahrary, Behzad; Gibbon, David C.

2002-01-01

Compares support vector machines (SVMs) to Rocchio, Ide regular and Ide dec-hi algorithms in information retrieval (IR) of text documents using relevancy feedback. If the preliminary search is so poor that one has to search through many documents to find at least one relevant document, then SVM is preferred. Includes nine tables. (Contains 24…

Intra-individual variability in information processing speed reflects white matter microstructure in multiple sclerosis.

Science.gov (United States)

Mazerolle, Erin L; Wojtowicz, Magdalena A; Omisade, Antonina; Fisk, John D

2013-01-01

Slowed information processing speed is commonly reported in persons with multiple sclerosis (MS), and is typically investigated using clinical neuropsychological tests, which provide sensitive indices of mean-level information processing speed. However, recent studies have demonstrated that within-person variability or intra-individual variability (IIV) in information processing speed may be a more sensitive indicator of neurologic status than mean-level performance on clinical tests. We evaluated the neural basis of increased IIV in mildly affected relapsing-remitting MS patients by characterizing the relation between IIV (controlling for mean-level performance) and white matter integrity using diffusion tensor imaging (DTI). Twenty women with relapsing-remitting MS and 20 matched control participants completed the Computerized Test of Information Processing (CTIP), from which both mean response time and IIV were calculated. Other clinical measures of information processing speed were also collected. Relations between IIV on the CTIP and DTI metrics of white matter microstructure were evaluated using tract-based spatial statistics. We observed slower and more variable responses on the CTIP in MS patients relative to controls. Significant relations between white matter microstructure and IIV were observed for MS patients. Increased IIV was associated with reduced integrity in more white matter tracts than was slowed information processing speed as measured by either mean CTIP response time or other neuropsychological test scores. Thus, despite the common use of mean-level performance as an index of cognitive dysfunction in MS, IIV may be more sensitive to the overall burden of white matter disease at the microstructural level. Furthermore, our study highlights the potential value of considering within-person fluctuations, in addition to mean-level performance, for uncovering brain-behavior relationships in neurologic disorders with widespread white matter pathology.

System for selecting relevant information for decision support.

Science.gov (United States)

Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

2013-01-01

We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

A User-Centered Approach to Adaptive Hypertext Based on an Information Relevance Model

Science.gov (United States)

Mathe, Nathalie; Chen, James

1994-01-01

Rapid and effective to information in large electronic documentation systems can be facilitated if information relevant in an individual user's content can be automatically supplied to this user. However most of this knowledge on contextual relevance is not found within the contents of documents, it is rather established incrementally by users during information access. We propose a new model for interactively learning contextual relevance during information retrieval, and incrementally adapting retrieved information to individual user profiles. The model, called a relevance network, records the relevance of references based on user feedback for specific queries and user profiles. It also generalizes such knowledge to later derive relevant references for similar queries and profiles. The relevance network lets users filter information by context of relevance. Compared to other approaches, it does not require any prior knowledge nor training. More importantly, our approach to adaptivity is user-centered. It facilitates acceptance and understanding by users by giving them shared control over the adaptation without disturbing their primary task. Users easily control when to adapt and when to use the adapted system. Lastly, the model is independent of the particular application used to access information, and supports sharing of adaptations among users.

A content relevance model for social media health information.

Science.gov (United States)

Prybutok, Gayle Linda; Koh, Chang; Prybutok, Victor R

2014-04-01

Consumer health informatics includes the development and implementation of Internet-based systems to deliver health risk management information and health intervention applications to the public. The application of consumer health informatics to educational and interventional efforts such as smoking reduction and cessation has garnered attention from both consumers and health researchers in recent years. Scientists believe that smoking avoidance or cessation before the age of 30 years can prevent more than 90% of smoking-related cancers and that individuals who stop smoking fare as well in preventing cancer as those who never start. The goal of this study was to determine factors that were most highly correlated with content relevance for health information provided on the Internet for a study group of 18- to 30-year-old college students. Data analysis showed that the opportunity for convenient entertainment, social interaction, health information-seeking behavior, time spent surfing on the Internet, the importance of available activities on the Internet (particularly e-mail), and perceived site relevance for Internet-based sources of health information were significantly correlated with content relevance for 18- to 30-year-old college students, an educated subset of this population segment.

Characterization of the microstructure of tin-silver lead free solder

Energy Technology Data Exchange (ETDEWEB)

Hurtony, Tamás, E-mail: hurtony@ett.bme.hu [Department of Electronics Technology, Budapest University of Technology and Economics, Egry József utca 18, Budapest, H-1111 (Hungary); Szakál, Alex; Almásy, László [Neutron Spectroscopy Department, Wigner Research Centre for Physics, Budapest (Hungary); Len, Adél [Neutron Spectroscopy Department, Wigner Research Centre for Physics, Budapest (Hungary); Faculty of Engineering and Information Technology, University of Pécs (Hungary); Kugler, Sándor [Department of Theoretical Physics, Budapest University of Technology and Economics (Hungary); Bonyár, Attila; Gordon, Péter [Department of Electronics Technology, Budapest University of Technology and Economics, Egry József utca 18, Budapest, H-1111 (Hungary)

2016-07-05

Reliability and lifetime are the two most relevant design considerations in the production of safety critical assemblies. For example in a modern automobile dozens of electronic assemblies are integrated in which thousands of solder joints are mounting the electronic components to the printed circuit boards. There exists no standardised and universal observation method for characterising the fine microstructure of such solder joints. Previously we have developed a new method for the quantitative characterization of lead-free solder alloys and in present study the validity of the proposed method is demonstrated. Microstructure of Sn-3.5Ag lead free solder alloy was investigated by electrochemical impedance spectroscopy. Solder samples were solidified with different cooling rates in order to induce differences in the microstructure. Microstructure of the ingots was revealed by selective electrochemical etching. Electrochemical impedance spectra (EIS) were measured before and after the selective etching process. The complex impedance spectra contain information about microstructure of the solder alloys. Comparison and modelling of two EIS spectra allowed obtaining a characteristic parameter of surface structure of the etched specimens. The EIS measurements were complemented with small angle neutron scattering measurements and scanning electron microscopy, in order to correlate the EIS parameter with the magnitude of the interface of the β-Sn and Ag{sub 3}Sn phases.

Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale

KAUST Repository

Rivnay, Jonathan

2012-10-10

A study was conducted to demonstrate quantitative determination of organic semiconductor microstructure from the molecular to device scale. The quantitative determination of organic semiconductor microstructure from the molecular to device scale was key to obtaining precise description of the molecular structure and microstructure of the materials of interest. This information combined with electrical characterization and modeling allowed for the establishment of general design rules to guide future rational design of materials and devices. Investigations revealed that a number and variety of defects were the largest contributors to the existence of disorder within a lattice, as organic semiconductor crystals were dominated by weak van der Waals bonding. Crystallite size, texture, and variations in structure due to spatial confinement and interfaces were also found to be relevant for transport of free charge carriers and bound excitonic species over distances that were important for device operation.

Cogito ergo video: Task-relevant information is involuntarily boosted into awareness.

Science.gov (United States)

Gayet, Surya; Brascamp, Jan W; Van der Stigchel, Stefan; Paffen, Chris L E

2015-01-01

Only part of the visual information that impinges on our retinae reaches visual awareness. In a series of three experiments, we investigated how the task relevance of incoming visual information affects its access to visual awareness. On each trial, participants were instructed to memorize one of two presented hues, drawn from different color categories (e.g., red and green), for later recall. During the retention interval, participants were presented with a differently colored grating in each eye such as to elicit binocular rivalry. A grating matched either the task-relevant (memorized) color category or the task-irrelevant (nonmemorized) color category. We found that the rivalrous stimulus that matched the task-relevant color category tended to dominate awareness over the rivalrous stimulus that matched the task-irrelevant color category. This effect of task relevance persisted when participants reported the orientation of the rivalrous stimuli, even though in this case color information was completely irrelevant for the task of reporting perceptual dominance during rivalry. When participants memorized the shape of a colored stimulus, however, its color category did not affect predominance of rivalrous stimuli during retention. Taken together, these results indicate that the selection of task-relevant information is under volitional control but that visual input that matches this information is boosted into awareness irrespective of whether this is useful for the observer.

Bootstrapping agency: How control-relevant information affects motivation.

Science.gov (United States)

Karsh, Noam; Eitam, Baruch; Mark, Ilya; Higgins, E Tory

2016-10-01

How does information about one's control over the environment (e.g., having an own-action effect) influence motivation? The control-based response selection framework was proposed to predict and explain such findings. Its key tenant is that control relevant information modulates both the frequency and speed of responses by determining whether a perceptual event is an outcome of one's actions or not. To test this framework empirically, the current study examines whether and how temporal and spatial contiguity/predictability-previously established as being important for one's sense of agency-modulate motivation from control. In 5 experiments, participants responded to a cue, potentially triggering a perceptual effect. Temporal (Experiments 1a-c) and spatial (Experiments 2a and b) contiguity/predictability between actions and their potential effects were experimentally manipulated. The influence of these control-relevant factors was measured, both indirectly (through their effect on explicit judgments of agency) and directly on response time and response frequency. The pattern of results was highly consistent with the control-based response selection framework in suggesting that control relevant information reliably modulates the impact of "having an effect" on different levels of action selection. We discuss the implications of this study for the notion of motivation from control and for the empirical work on the sense of agency. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Fuzzy Mutual Information Based min-Redundancy and Max-Relevance Heterogeneous Feature Selection

Directory of Open Access Journals (Sweden)

Daren Yu

2011-08-01

Full Text Available Feature selection is an important preprocessing step in pattern classification and machine learning, and mutual information is widely used to measure relevance between features and decision. However, it is difficult to directly calculate relevance between continuous or fuzzy features using mutual information. In this paper we introduce the fuzzy information entropy and fuzzy mutual information for computing relevance between numerical or fuzzy features and decision. The relationship between fuzzy information entropy and differential entropy is also discussed. Moreover, we combine fuzzy mutual information with qmin-Redundancy-Max-Relevanceq, qMax-Dependencyq and min-Redundancy-Max-Dependencyq algorithms. The performance and stability of the proposed algorithms are tested on benchmark data sets. Experimental results show the proposed algorithms are effective and stable.

Fuzzy Information Retrieval Using Genetic Algorithms and Relevance Feedback.

Science.gov (United States)

Petry, Frederick E.; And Others

1993-01-01

Describes an approach that combines concepts from information retrieval, fuzzy set theory, and genetic programing to improve weighted Boolean query formulation via relevance feedback. Highlights include background on information retrieval systems; genetic algorithms; subproblem formulation; and preliminary results based on a testbed. (Contains 12…

Disclosure of Non-Financial Information: Relevant to Financial Analysts?

OpenAIRE

ORENS, Raf; LYBAERT, Nadine

2013-01-01

The decline in the relevance of financial statement information to value firms leads to calls from organizational stakeholders to convey non-financial information in order to be able to judge firms' financial performance and value. This literature review aims to report extant literature findings on the use of corporate non-financial information by sell-side financial analysts, the information intermediaries between corporate management and investors. Prior studies highlight that financial ana...

Investigation of biomedical inner microstructures with hard X-ray phase-contrast imaging

Energy Technology Data Exchange (ETDEWEB)

Shu Hang [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Graduate University of the Chinese Academy of Sciences, 100864 Beijing (China); Zhu Peiping [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Chen Bo [Department of Physics, University of Science and Technology of China, Hefei 230026 (China); Liu Bo; Yin Hongxia [Capital University of Medical Sciences, 100054 Beijing (China); Li Enrong [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Graduate University of the Chinese Academy of Sciences, 100864 Beijing (China); Liu Yijin [Department of Physics, University of Science and Technology of China, Hefei 230026 (China); Wang Junyue [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Graduate University of the Chinese Academy of Sciences, 100864 Beijing (China); Yuan Qingxi; Huang Wanxia; Fang Shouxian [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); Wu Ziyu [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, CAS, 100049 Beijing (China); National Center for NanoScience and Technology, 100080 Beijing (China)], E-mail: wuzy@ihep.ac.cn

2007-09-21

Hard X-ray Phase-Contrast Imaging (HX-PCI) is a new and valuable method that may provide information of the inner parts of an opaque object. Previous reports demonstrated its applicability in soft and hard tissue imaging. Here we provide further evidence for improved image quality and the effective capability to distinguish inner microstructures in real biomedical systems such as cochlea. Experiments performed both at the 4W1A beamline of the Beijing Synchrotron Radiation Facility (BSRF) and at the Taiwan National Synchrotron Radiation Research Center (NSRRC) clearly show details of samples' inner microstructure with a resolution of a few microns. The improved spatial resolution is a relevant achievement for future improved understanding and clinical trials.

The Relevance of Grain Dissection for Grain Size Reduction in Polar Ice: Insights from Numerical Models and Ice Core Microstructure Analysis

Directory of Open Access Journals (Sweden)

Florian Steinbach

2017-09-01

Full Text Available The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modeling and analyzed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD have been used together with c-axis orientations using an optical technique (Fabric Analyser. Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighboring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modeling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be

The relevance of grain dissection for grain size reduction in polar ice: insights from numerical models and ice core microstructure analysis

Science.gov (United States)

Steinbach, Florian; Kuiper, Ernst-Jan N.; Eichler, Jan; Bons, Paul D.; Drury, Martyn R.; Griera, Albert; Pennock, Gill M.; Weikusat, Ilka

2017-09-01

The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modelling and analysed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM) project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD) have been used together with c-axis orientations using an optical technique (Fabric Analyser). Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighbouring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modelling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be used to

Information sharing during diagnostic assessments: what is relevant for parents?

Science.gov (United States)

Klein, Sheryl; Wynn, Kerry; Ray, Lynne; Demeriez, Lori; LaBerge, Patricia; Pei, Jacqueline; St Pierre, Cherie

2011-05-01

ABSTRACT This descriptive qualitative study facilitates the application of family-centered care within a tertiary care interdisciplinary neurodevelopmental diagnostic assessment clinic by furthering an understanding of parent perceptions of the relevance of diagnostic information provision. An interdisciplinary assessment team completed an open-ended questionnaire to describe parent information provision. Parents from 9 families completed in-depth parent interviews following clinic attendance to discuss perceptions of information received. Interviews were audiotaped, transcribed, and coded by related themes. Parents did not perceive the information in the way professionals expected. Parents acknowledged receipt of comprehensive information relevant to the diagnosis but indicated that not all their needs were met. During the interviews, parents described the assessment process, preassessment information, and "steps in their journey." They noted that a strength-based approach and a focus on parental competency would support their coping efforts. Results underscore the need for professionals to be attentive to parents' individualized needs.

Impact of Non Accounting Information on The Value Relevance of Accounting Information: The Case of Jordan

Directory of Open Access Journals (Sweden)

DHIAA SHAMKI

2013-07-01

Full Text Available The paper presents empirical evidence about the impact of firm’s shareholders number as non accounting information on the value relevance of its earnings and book value of equity as accounting information for Jordanian industrial firms for the period from 1993 to 2002. Employing the return regression analysis and using shareholders number in two proxies namely local and foreign shareholders number, the findings of the study are fourfold. First, Individual earnings are value relevant while book value is irrelevant. Second, combining earnings with book value leads both of them to be irrelevant. Third, extending local shareholders number has significant impact on the value relevance of individual and combined earnings. Forth, extending foreign shareholders number has significant impact on the value relevance of individual book value and combined earnings. Since studies on the value relevance of these variables have neglected Jordan (and the Middle Eastern region, the study is the first especially in Jordan that tries to fill this gap by examiningthe impact of shareholders numbers on the value relevance of earnings and book valueto indicate firm value.

Predicting EEG complexity from sleep macro and microstructure

International Nuclear Information System (INIS)

Chouvarda, I; Maglaveras, N; Mendez, M O; Rosso, V; Parrino, L; Grassi, A; Terzano, M; Bianchi, A M; Cerutti, S

2011-01-01

This work investigates the relation between the complexity of electroencephalography (EEG) signal, as measured by fractal dimension (FD), and normal sleep structure in terms of its macrostructure and microstructure. Sleep features are defined, encoding sleep stage and cyclic alternating pattern (CAP) related information, both in short and long term. The relevance of each sleep feature to the EEG FD is investigated, and the most informative ones are depicted. In order to quantitatively assess the relation between sleep characteristics and EEG dynamics, a modeling approach is proposed which employs subsets of the sleep macrostructure and microstructure features as input variables and predicts EEG FD based on these features of sleep micro/macrostructure. Different sleep feature sets are investigated along with linear and nonlinear models. Findings suggest that the EEG FD time series is best predicted by a nonlinear support vector machine (SVM) model, employing both sleep stage/transitions and CAP features at different time scales depending on the EEG activation subtype. This combination of features suggests that short-term and long-term history of macro and micro sleep events interact in a complex manner toward generating the dynamics of sleep

The Relevance of Information and Communication Technologies in ...

African Journals Online (AJOL)

The Relevance of Information and Communication Technologies in Libraries Services ... Technologies in Libraries Services and Librarianship Profession in the 21th Century ... This paper therefore, examines the importance of ICT in librarianship as a ... for Authors · for Policy Makers · about Open Access · Journal Quality.

The relevance of accounting information enclosed in performance indicators

Directory of Open Access Journals (Sweden)

Mihaela-Cristina Onica

2012-12-01

Full Text Available This research study is analyzing the relevance of accounting information reflected through the elaboration of firm performance variables and administration because of the necessity of performance to be administrated. The subject of the theme is enclosed in current development of accounting norms at national , european, (Directives and international levels (IAS/IFRS. The analyised topic is based upon the capabilty of accounting to generate information , throug synthesis calculus being settled the nature , the characteristics and the informational valences of financial performance of an organization. The accounting infromation is base for performing the decison process. The rol of accounting in insurring the relevance and comparability of information increased significantly, being already indispensable. A real solution for communication misunderstanig elimination emerged, as result of diputes in perception and interpretation of economic information, as results for the national speciffic norms.The economic communication is demanding for firm not only in its expression but in thinking and in the process of method conceptualization of organization and administration. A detailed financial situation analysis, which are employing annual financial analysis procedures, underling the performance and risks influencing factors, are considering one starting point for addressing the issue. The introduced variables are insuring a whole vision of firm activity and an appropriate strategy for results significance.

Electronic patient records in action: Transforming information into professionally relevant knowledge.

Science.gov (United States)

Winman, Thomas; Rystedt, Hans

2011-03-01

The implementation of generic models for organizing information in complex institutions like those in healthcare creates a gap between standardization and the need for locally relevant knowledge. The present study addresses how this gap can be bridged by focusing on the practical work of healthcare staff in transforming information in EPRs into knowledge that is useful for everyday work. Video recording of shift handovers on a rehabilitation ward serves as the empirical case. The results show how extensive selections and reorganizations of information in EPRs are carried out in order to transform information into professionally relevant accounts. We argue that knowledge about the institutional obligations and professional ways of construing information are fundamental for these transitions. The findings point to the need to consider the role of professional knowledge inherent in unpacking information in efforts to develop information systems intended to bridge between institutional and professional boundaries in healthcare. © The Author(s) 2011.

Microstructural evolution under high temperature irradiation: fundamental aspects

International Nuclear Information System (INIS)

Martin, G.; Valentin, P.

1984-01-01

In view of the impossibility to propose theoretically established scaling laws for extrapolating microstructural evolutions to unknown irradiation conditions, a full modelization of microstructural evolution at the atomistic level cannot be avoided. We briefly review the main models available for describing: defect balance under irradiation, the nucleation of clusters of various types, the development of each of the components of the microstructure, synergistic effects among the latter. Attention is called on the problems which remain to be solved at each step. In particular, the swelling incubation phenomenon is just being studied from the fundamental viewpoint. A table of available relevant observations thereof is given. The existence of dose-rate thresholds accross which microstructural evolution undergoes a qualitative change is stressed. Such thresholds call for a detailed modelization of microstructural evolution in order to propose safe extrapolation techniques [fr

Task-relevant information is prioritized in spatiotemporal contextual cueing.

Science.gov (United States)

Higuchi, Yoko; Ueda, Yoshiyuki; Ogawa, Hirokazu; Saiki, Jun

2016-11-01

Implicit learning of visual contexts facilitates search performance-a phenomenon known as contextual cueing; however, little is known about contextual cueing under situations in which multidimensional regularities exist simultaneously. In everyday vision, different information, such as object identity and location, appears simultaneously and interacts with each other. We tested the hypothesis that, in contextual cueing, when multiple regularities are present, the regularities that are most relevant to our behavioral goals would be prioritized. Previous studies of contextual cueing have commonly used the visual search paradigm. However, this paradigm is not suitable for directing participants' attention to a particular regularity. Therefore, we developed a new paradigm, the "spatiotemporal contextual cueing paradigm," and manipulated task-relevant and task-irrelevant regularities. In four experiments, we demonstrated that task-relevant regularities were more responsible for search facilitation than task-irrelevant regularities. This finding suggests our visual behavior is focused on regularities that are relevant to our current goal.

Iterative Filtering of Retrieved Information to Increase Relevance

Directory of Open Access Journals (Sweden)

Robert Zeidman

2007-12-01

Full Text Available Efforts have been underway for years to find more effective ways to retrieve information from large knowledge domains. This effort is now being driven particularly by the Internet and the vast amount of information that is available to unsophisticated users. In the early days of the Internet, some effort involved allowing users to enter Boolean equations of search terms into search engines, for example, rather than just a list of keywords. More recently, effort has focused on understanding a user's desires from past search histories in order to narrow searches. Also there has been much effort to improve the ranking of results based on some measure of relevancy. This paper discusses using iterative filtering of retrieved information to focus in on useful information. This work was done for finding source code correlation and the author extends his findings to Internet searching and e-commerce. The paper presents specific information about a particular filtering application and then generalizes it to other forms of information retrieval.

Online drug databases: a new method to assess and compare inclusion of clinically relevant information.

Science.gov (United States)

Silva, Cristina; Fresco, Paula; Monteiro, Joaquim; Rama, Ana Cristina Ribeiro

2013-08-01

Evidence-Based Practice requires health care decisions to be based on the best available evidence. The model "Information Mastery" proposes that clinicians should use sources of information that have previously evaluated relevance and validity, provided at the point of care. Drug databases (DB) allow easy and fast access to information and have the benefit of more frequent content updates. Relevant information, in the context of drug therapy, is that which supports safe and effective use of medicines. Accordingly, the European Guideline on the Summary of Product Characteristics (EG-SmPC) was used as a standard to evaluate the inclusion of relevant information contents in DB. To develop and test a method to evaluate relevancy of DB contents, by assessing the inclusion of information items deemed relevant for effective and safe drug use. Hierarchical organisation and selection of the principles defined in the EGSmPC; definition of criteria to assess inclusion of selected information items; creation of a categorisation and quantification system that allows score calculation; calculation of relative differences (RD) of scores for comparison with an "ideal" database, defined as the one that achieves the best quantification possible for each of the information items; pilot test on a sample of 9 drug databases, using 10 drugs frequently associated in literature with morbidity-mortality and also being widely consumed in Portugal. Main outcome measure Calculate individual and global scores for clinically relevant information items of drug monographs in databases, using the categorisation and quantification system created. A--Method development: selection of sections, subsections, relevant information items and corresponding requisites; system to categorise and quantify their inclusion; score and RD calculation procedure. B--Pilot test: calculated scores for the 9 databases; globally, all databases evaluated significantly differed from the "ideal" database; some DB performed

Communicating stereotype-relevant information: is factual information subject to the same communication biases as fictional information?

Science.gov (United States)

Goodman, Ruth L; Webb, Thomas L; Stewart, Andrew J

2009-07-01

Factual information is more frequently read and discussed than fictional information. However, research on the role of communication in shaping stereotypes has focused almost exclusively on fictional narratives. In Experiments 1 and 2 a newspaper article containing information about heroin users was communicated along chains of 4 people. No stereotype-consistency bias was observed. Instead, a greater proportion of stereotype-inconsistent information was communicated than was stereotype-consistent or -neutral information. Three further experiments investigated explanations for the difference between the communication of fictional and factual information. Experiment 3 ruled out the possibility that participants' beliefs about the validity of the information could influence the way that it is communicated. Experiments 4 and 5 divided information into concrete (a specific event or fact) or abstract (opinion). A stereotype-consistency bias emerged only for abstract information. In summary, linguistic abstraction moderates whether stereotype-consistency biases emerge in the communication of stereotype-relevant factual information.

Why relevance theory is relevant for lexicography

DEFF Research Database (Denmark)

Bothma, Theo; Tarp, Sven

2014-01-01

This article starts by providing a brief summary of relevance theory in information science in relation to the function theory of lexicography, explaining the different types of relevance, viz. objective system relevance and the subjective types of relevance, i.e. topical, cognitive, situational...... that is very important for lexicography as well as for information science, viz. functional relevance. Since all lexicographic work is ultimately aimed at satisfying users’ information needs, the article then discusses why the lexicographer should take note of all these types of relevance when planning a new...... dictionary project, identifying new tasks and responsibilities of the modern lexicographer. The article furthermore discusses how relevance theory impacts on teaching dictionary culture and reference skills. By integrating insights from lexicography and information science, the article contributes to new...

Age differences in attention toward decision-relevant information: education matters.

Science.gov (United States)

Xing, Cai; Isaacowitz, Derek

2011-01-01

Previous studies suggested that older adults are more likely to engage in heuristic decision-making than young adults. This study used eye tracking technique to examine young adults' and highly educated older adults' attention toward two types of decision-relevant information: heuristic cue vs. factual cues. Surprisingly, highly educated older adults showed the reversed age pattern-they looked more toward factual cues than did young adults. This age difference disappeared after controlling for educational level. Additionally, education correlated with attentional pattern to decision-relevant information. We interpret this finding as an indication of the power of education: education may modify what are thought to be "typical" age differences in decision-making, and education may influence young and older people's decision-making via different paths.

Zirconium microstructures: uncharted possibilities

International Nuclear Information System (INIS)

Samajdar, I.; Kumar, Gulshan; Singh, Jaiveer; Lodh, Arijit; Srivastava, D.; Tewari, R.; Dey, G.K.; Saibaba, N.

2015-01-01

The 'conventional' Zirconium microstructures can be significantly extended with information on: (i) microtexture, (ii) residual stresses and (iii) local mechanical properties. Though these involve different tools, but a consolidated microstructure can be crated. This is the theme of this presentation. Examples of this consolidated picture will be made from deformation twinning, recovery-recrystallization, burst ductility and orientation versus solid solution hardening. (author)

An investigation of the microstructures of heat-treated zircaloy-4

International Nuclear Information System (INIS)

Bangaru, N.V.

1985-01-01

A TEM/STEM investigation of the microstructure and microchemistry of commercial Zircaloy-4 samples subjected to three different final heat treatments in the laboratory has been conducted to understand the processing-microstructure-corrosion relationships in these alloys. Pronounced differences in the volume fraction, morphology, and chemistry of the intermetallic particles as well as in the α phase microstructure have been observed among the beta-quenched, as-received (stress-relieved) and alpha-annealed samples. The beta-quenched sample exhibits the most uniform microstructure consisting of acicular α phase with lath boundary Sn enrichment and fine intermetallic particle formation. The as-received sample has the most inhomogeneous microstructure made up of annealed and deformed α phase. The relevance of the observed microstructural features to the nodular corrosion susceptibility is discussed in the light of some existing models of modular corrosion. (orig.)

Phase synchronization of delta and theta oscillations increase during the detection of relevant lexical information

Directory of Open Access Journals (Sweden)

Enzo eBrunetti

2013-06-01

Full Text Available During monitoring of the discourse, the detection of the relevance of incoming lexical information could be critical for its incorporation to update mental representations in memory. Because, in these situations, the relevance for lexical information is defined by abstract rules that are maintained in memory, results critical to understand how an abstract level of knowledge maintained in mind mediates the detection of the lower-level semantic information. In the present study, we propose that neuronal oscillations participate in the detection of relevant lexical information, based on ‘kept in mind’ rules deriving from more abstract semantic information. We tested our hypothesis using an experimental paradigm that restricted the detection of relevance to inferences based on explicit information, thus controlling for ambiguities derived from implicit aspects. We used a categorization task, in which the semantic relevance was previously defined based on the congruency between a kept in mind category (abstract knowledge, and the lexical-semantic information presented. Our results show that during the detection of the relevant lexical information, phase synchronization of neuronal oscillations selectively increases in delta and theta frequency bands during the interval of semantic analysis. These increments were independent of the semantic category maintained in memory, had a temporal profile specific for each subject, and were mainly induced, as they had no effect on the evoked mean global field power. Also, recruitment of an increased number of pairs of electrodes was a robust observation during the detection of semantic contingent words. These results are consistent with the notion that the detection of relevant lexical information based on a particular semantic rule, could be mediated by increasing the global phase synchronization of neuronal oscillations, which may contribute to the recruitment of an extended number of cortical regions.

Phase synchronization of delta and theta oscillations increase during the detection of relevant lexical information.

Science.gov (United States)

Brunetti, Enzo; Maldonado, Pedro E; Aboitiz, Francisco

2013-01-01

During monitoring of the discourse, the detection of the relevance of incoming lexical information could be critical for its incorporation to update mental representations in memory. Because, in these situations, the relevance for lexical information is defined by abstract rules that are maintained in memory, a central aspect to elucidate is how an abstract level of knowledge maintained in mind mediates the detection of the lower-level semantic information. In the present study, we propose that neuronal oscillations participate in the detection of relevant lexical information, based on "kept in mind" rules deriving from more abstract semantic information. We tested our hypothesis using an experimental paradigm that restricted the detection of relevance to inferences based on explicit information, thus controlling for ambiguities derived from implicit aspects. We used a categorization task, in which the semantic relevance was previously defined based on the congruency between a kept in mind category (abstract knowledge), and the lexical semantic information presented. Our results show that during the detection of the relevant lexical information, phase synchronization of neuronal oscillations selectively increases in delta and theta frequency bands during the interval of semantic analysis. These increments occurred irrespective of the semantic category maintained in memory, had a temporal profile specific for each subject, and were mainly induced, as they had no effect on the evoked mean global field power. Also, recruitment of an increased number of pairs of electrodes was a robust observation during the detection of semantic contingent words. These results are consistent with the notion that the detection of relevant lexical information based on a particular semantic rule, could be mediated by increasing the global phase synchronization of neuronal oscillations, which may contribute to the recruitment of an extended number of cortical regions.

Detecting clinically relevant new information in clinical notes across specialties and settings.

Science.gov (United States)

Zhang, Rui; Pakhomov, Serguei V S; Arsoniadis, Elliot G; Lee, Janet T; Wang, Yan; Melton, Genevieve B

2017-07-05

Automated methods for identifying clinically relevant new versus redundant information in electronic health record (EHR) clinical notes is useful for clinicians and researchers involved in patient care and clinical research, respectively. We evaluated methods to automatically identify clinically relevant new information in clinical notes, and compared the quantity of redundant information across specialties and clinical settings. Statistical language models augmented with semantic similarity measures were evaluated as a means to detect and quantify clinically relevant new and redundant information over longitudinal clinical notes for a given patient. A corpus of 591 progress notes over 40 inpatient admissions was annotated for new information longitudinally by physicians to generate a reference standard. Note redundancy between various specialties was evaluated on 71,021 outpatient notes and 64,695 inpatient notes from 500 solid organ transplant patients (April 2015 through August 2015). Our best method achieved at best performance of 0.87 recall, 0.62 precision, and 0.72 F-measure. Addition of semantic similarity metrics compared to baseline improved recall but otherwise resulted in similar performance. While outpatient and inpatient notes had relatively similar levels of high redundancy (61% and 68%, respectively), redundancy differed by author specialty with mean redundancy of 75%, 66%, 57%, and 55% observed in pediatric, internal medicine, psychiatry and surgical notes, respectively. Automated techniques with statistical language models for detecting redundant versus clinically relevant new information in clinical notes do not improve with the addition of semantic similarity measures. While levels of redundancy seem relatively similar in the inpatient and ambulatory settings in the Fairview Health Services, clinical note redundancy appears to vary significantly with different medical specialties.

Incrustation de microstructures par écarts chromatiques

OpenAIRE

Rudaz, Nicolas; Hersch, Roger-David

2005-01-01

Electronic imaging devices produce the illusion of synthesizing continuous colors by applying halftones, which are repetitive structures of discrete micro-elements. By themselves, these microstructures do not carry any meaning: their only purpose is to fool the eye. We explore a new approach for creating color images with two layers of information, one layer of information being the global image and the second layer of information being represented by a meaningful microstructure embedded with...

Incrustation de microstructures par écarts chromatiques

OpenAIRE

Rudaz, Nicolas

2003-01-01

Electronic imaging devices produce the illusion of synthesizing continuous colors by applying halftones, which are repetitive structures of discrete micro-elements. By themselves, these microstructures do not carry any meaning: their only purpose is to fool the eye. We explore a new approach for creating color images with two layers of information, one layer of information being the global image and the second layer of information being represented by a meaningful microstructure embedded with...

Workshop Report: Linking Processing to Performance through Microstructure

National Research Council Canada - National Science Library

2004-01-01

..., and time-dependent property models. Other topics of interest included probabilistic aspects of property prediction, microstructurally informed constitutive modeling, microstructural evolution during processing, crystal plasticity...

Microstructural evaluation of a varistor block utilized in high voltage surge arresters

International Nuclear Information System (INIS)

Andrade, J.M. de; Dias, R.; Furtado, J.G. de M.; Assuncao, F.C.R.

2010-01-01

Varistor is a semiconductor ceramic device characterized to have a high non-linear electrical resistance, it is used as active element of surge arresters with purpose of protecting of electro-electronics systems. Its properties are directly dependents of chemical composition and microstructural characteristics, such as grain size, porosity, twins and phases distribution. This work has the objective to characterize microstructurally a commercial varistor block of ZnO used in high voltage surge arrest and from this characterization to infer aspects about of its electrical macroscopic performance. DRX and SEM-EDS were used for microstructural analysis. The microstructural evaluation allows pointing the critical points of microstructure and, suggest relevant aspects to the improvement of commercial varistor microstructure, optimizing the electrothermal behavior of the device. (author)

The relevance of music information representation metadata from the perspective of expert users

Directory of Open Access Journals (Sweden)

Camila Monteiro de Barros

Full Text Available The general goal of this research was to verify which metadata elements of music information representation are relevant for its retrieval from the perspective of expert music users. Based on a bibliographical research, a comprehensive metadata set of music information representation was developed and transformed into a questionnaire for data collection, which was applied to students and professors of the Graduate Program in Music at the Federal University of Rio Grande do Sul. The results show that the most relevant information for expert music users is related to identification and authorship responsibilities. The respondents from Composition and Interpretative Practice areas agree with these results, while the respondents from Musicology/Ethnomusicology and Music Education areas also consider the metadata related to the historical context of composition relevant.

Artificial Microstructures to Investigate Microstructure-Property Relationships in Metallic Glasses

Science.gov (United States)

Sarac, Baran

Technology has evolved rapidly within the last decade, and the demand for higher performance materials has risen exponentially. To meet this demand, novel materials with advanced microstructures have been developed and are currently in use. However, the already complex microstructure of technological relevant materials imposes a limit for currently used development strategies for materials with optimized properties. For this reason, a strategy to correlate microstructure features with properties is still lacking. Computer simulations are challenged due to the computing size required to analyze multi-scale characteristics of complex materials, which is orders of magnitude higher than today's state of the art. To address these challenges, we introduced a novel strategy to investigate microstructure-property relationships. We call this strategy "artificial microstructure approach", which allows us to individually and independently control microstructural features. By this approach, we defined a new way of analyzing complex microstructures, where microstructural second phase features were precisely varied over a wide range. The artificial microstructures were fabricated by the combination of lithography and thermoplastic forming (TPF), and subsequently characterized under different loading conditions. Because of the suitability and interesting properties of metallic glasses, we proposed to use this toolbox to investigate the different deformation modes in cellular structures and toughening mechanism in metallic glass (MG) composites. This study helped us understand how to combine the unique properties of metallic glasses such as high strength, elasticity, and thermoplastic processing ability with plasticity generated from heterostructures of metallic glasses. It has been widely accepted that metallic glass composites are very complex, and a broad range of contributions have been suggested to explain the toughening mechanism. This includes the shear modulus, morphology

the effect of current and relevant information sources on the use

African Journals Online (AJOL)

Admin

reported similar findings at Yaba College of. Technology, Lagos. However, in a ... values. In other words, current information sources resulted in the use of the library. Jam (1992) identified lack of relevant information sources to be one of the problems facing library users and has ... Bachelor's degree holders. That those with.

Microstructural characterization of stone wool fibre network

DEFF Research Database (Denmark)

Chapelle, Lucie; Brøndsted, Povl; Kusano, Yukihiro

2014-01-01

Understanding the mechanical properties of fibrous network as complex as stone wool materials requires a relevant description of their microstructure and architecture. In this study, different methods have been proposed to characterize the fibre orientation, diameter and length of fibres as well...

Task-Relevant Information Modulates Primary Motor Cortex Activity Before Movement Onset.

Science.gov (United States)

Calderon, Cristian B; Van Opstal, Filip; Peigneux, Philippe; Verguts, Tom; Gevers, Wim

2018-01-01

Monkey neurophysiology research supports the affordance competition hypothesis (ACH) proposing that cognitive information useful for action selection is integrated in sensorimotor areas. In this view, action selection would emerge from the simultaneous representation of competing action plans, in parallel biased by relevant task factors. This biased competition would take place up to primary motor cortex (M1). Although ACH is plausible in environments affording choices between actions, its relevance for human decision making is less clear. To address this issue, we designed an functional magnetic resonance imaging (fMRI) experiment modeled after monkey neurophysiology studies in which human participants processed cues conveying predictive information about upcoming button presses. Our results demonstrate that, as predicted by the ACH, predictive information (i.e., the relevant task factor) biases activity of primary motor regions. Specifically, first, activity before movement onset in contralateral M1 increases as the competition is biased in favor of a specific button press relative to activity in ipsilateral M1. Second, motor regions were more tightly coupled with fronto-parietal regions when competition between potential actions was high, again suggesting that motor regions are also part of the biased competition network. Our findings support the idea that action planning dynamics as proposed in the ACH are valid both in human and non-human primates.

Relevant Information and Informed Consent in Research: In Defense of the Subjective Standard of Disclosure.

Science.gov (United States)

Dranseika, Vilius; Piasecki, Jan; Waligora, Marcin

2017-02-01

In this article, we seek to contribute to the debate on the requirement of disclosure in the context of informed consent for research. We defend the subjective standard of disclosure and describe ways to implement this standard in research practice. We claim that the researcher should make an effort to find out what kinds of information are likely to be relevant for those consenting to research. This invites researchers to take empirical survey information seriously, attempt to understand the cultural context, talk to patients to be better able to understand what can be potentially different concerns and interests prevalent in the target population. The subjective standard of disclosure should be seen as a moral ideal that perhaps can never be perfectly implemented but still can and should be used as a normative ideal guiding research practice. In the light of these discussions, we call for more empirical research on what considerations are likely to be perceived as relevant by potential research participants recruited from different socio-economic and cultural groups.

77 FR 42339 - Improving Contracting Officers' Access to Relevant Integrity Information

Science.gov (United States)

2012-07-18

... contracting officers' access to relevant information about contractor business ethics in the Federal Awardee... ability to evaluate the business ethics of prospective contractors and protect the Government from...

The Common Body of Knowledge: A Framework to Promote Relevant Information Security Research

Directory of Open Access Journals (Sweden)

Kenneth J. Knapp

2007-03-01

Full Text Available This study proposes using an established common body of knowledge (CBK as one means of organizing information security literature.  Consistent with calls for more relevant information systems (IS research, this industry-developed framework can motivate future research towards topics that are important to the security practitioner.  In this review, forty-eight articles from ten IS journals from 1995 to 2004 are selected and cross-referenced to the ten domains of the information security CBK.  Further, we distinguish articles as empirical research, frameworks, or tutorials.  Generally, this study identified a need for additional empirical research in every CBK domain including topics related to legal aspects of information security.  Specifically, this study identified a need for additional IS security research relating to applications development, physical security, operations security, and business continuity.  The CBK framework is inherently practitioner oriented and using it will promote relevancy by steering IS research towards topics important to practitioners.  This is important considering the frequent calls by prominent information systems scholars for more relevant research.  Few research frameworks have emerged from the literature that specifically classify the diversity of security threats and range of problems that businesses today face.  With the recent surge of interest in security, the need for a comprehensive framework that also promotes relevant research can be of great value.

Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

Energy Technology Data Exchange (ETDEWEB)

Wasywich, K M

1993-05-01

Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs.

Characteristics of used CANDU fuel relevant to the Canadian nuclear fuel waste management program

International Nuclear Information System (INIS)

Wasywich, K.M.

1993-05-01

Literature data on the characteristics of used CANDU power reactor fuel that are relevant to its performance as a waste form have been compiled in a convenient handbook. Information about the quantities of used fuel generated, burnup, radionuclide inventories, fission gas release, void volume and surface area, fuel microstructure, fuel cladding properties, changes in fuel bundle properties due to immobilization processes, radiation fields, decay heat and future trends is presented for various CANDU fuel designs. (author). 199 refs., 39 tabs., 100 figs

THE RELEVANCE OF ECONOMIC INFORMATION IN ANALYZING THE ECONOMIC PERFORMANCE

Directory of Open Access Journals (Sweden)

PATRUTA MIRCEA IOAN

2017-12-01

Full Text Available The performance analysis is based on an informational system, which provides financial information in various formatsand with various applicabilities.We intend to formulate a set of important caracteristics of financial information along with identifying a set of relevant financial rates and indicatorsused to appreciate the performance level of a company. Economic performance can be interpreted in different ways at each level of analysis. Generally, it refers to economic growth, increased productivity and profitability. The growth of labor productivity or increased production per worker is a measure of efficient use of resources in value creation.

Pengaruh Participation Budgeting, Information Asimetry dan Job Relevant Information terhadap Budget Slack pada Institusi Pendidikan (Studi pada Institusi Pendidikan Universitas Kristen Maranatha)

OpenAIRE

K. S., Christine Dwi; Agustina, Lidya

2010-01-01

The purpose of this research is to analyze and examine the hyphothesis effect of participation budgeting on job relevant information and  information asimetry as a moderating variable , and effect of participation budgeting and information asimetry on budget slack and job relevant information as mediating varible. The respondent of this research are 30 structural staf of program and ministry in Maranatha Christian University who have participated to make  budgeting. This method that...

Age Differences in Attention toward Decision-Relevant Information: Education Matters

Science.gov (United States)

Xing, Cai; Isaacowitz, Derek

2011-01-01

Previous studies suggested that older adults are more likely to engage in heuristic decision-making than young adults. This study used eye tracking technique to examine young adults' and highly educated older adults' attention toward two types of decision-relevant information: heuristic cue vs. factual cues. Surprisingly, highly educated older…

The pricing relevance of insider information; Die Preiserheblichkeit von Insiderinformationen

Energy Technology Data Exchange (ETDEWEB)

Kruse, Dominik

2011-07-01

The publication attempts to describe the so far discussion concerning the feature of pricing relevance and to develop it further with the aid of new research approaches. First, a theoretical outline is presented of the elementary regulation problem of insider trading, its historical development, and the regulation goals of the WpHG. This is followed by an analysis of the concrete specifications of the law. In view of the exemplarity of US law, a country with long experience in regulation of the capital market, the materiality doctrine of US insider law is gone into in some detail. The goals and development of the doctrine are reviewed in the light of court rulings. The third part outlines the requirements of German law in order to forecast the pricing relevance of insider information, while the final part presents a critical review of the current regulations on pricing relevance. (orig./RHM)

Diffraction analysis of the microstructure of materials

CERN Document Server

Scardi, Paolo

2004-01-01

Diffraction Analysis of the Microstructure of Materials provides an overview of diffraction methods applied to the analysis of the microstructure of materials. Since crystallite size and the presence of lattice defects have a decisive influence on the properties of many engineering materials, information about this microstructure is of vital importance in developing and assessing materials for practical applications. The most powerful and usually non-destructive evaluation techniques available are X-ray and neutron diffraction. The book details, among other things, diffraction-line broadening methods for determining crystallite size and atomic-scale strain due, e.g. to dislocations, and methods for the analysis of residual (macroscale) stress. The book assumes only a basic knowledge of solid-state physics and supplies readers sufficient information to apply the methods themselves.

Spatially Compact Neural Clusters in the Dorsal Striatum Encode Locomotion Relevant Information.

Science.gov (United States)

Barbera, Giovanni; Liang, Bo; Zhang, Lifeng; Gerfen, Charles R; Culurciello, Eugenio; Chen, Rong; Li, Yun; Lin, Da-Ting

2016-10-05

An influential striatal model postulates that neural activities in the striatal direct and indirect pathways promote and inhibit movement, respectively. Normal behavior requires coordinated activity in the direct pathway to facilitate intended locomotion and indirect pathway to inhibit unwanted locomotion. In this striatal model, neuronal population activity is assumed to encode locomotion relevant information. Here, we propose a novel encoding mechanism for the dorsal striatum. We identified spatially compact neural clusters in both the direct and indirect pathways. Detailed characterization revealed similar cluster organization between the direct and indirect pathways, and cluster activities from both pathways were correlated with mouse locomotion velocities. Using machine-learning algorithms, cluster activities could be used to decode locomotion relevant behavioral states and locomotion velocity. We propose that neural clusters in the dorsal striatum encode locomotion relevant information and that coordinated activities of direct and indirect pathway neural clusters are required for normal striatal controlled behavior. VIDEO ABSTRACT. Published by Elsevier Inc.

Changing Zaire to Congo: the fate of no-longer relevant mnemonic information.

Science.gov (United States)

Eriksson, Johan; Stiernstedt, Mikael; Öhlund, Maria; Nyberg, Lars

2014-11-01

In an ever-changing world there is constant pressure on revising long-term memory, such when people or countries change name. What happens to the old, pre-existing information? One possibility is that old associations gradually are weakened and eventually lost. Alternatively, old and no longer relevant information may still be an integral part of memory traces. To test the hypothesis that old mnemonic information still becomes activated when people correctly retrieve new, currently relevant information, brain activity was measured with fMRI while participants performed a cued-retrieval task. Paired associates (symbol-sound and symbol-face pairs) were first learned during two days. Half of the associations were then updated during the next two days, followed by fMRI scanning on day 5 and also 18 months later. As expected, retrieval reactivated sensory cortex related to the most recently learned association (visual cortex for symbol-face pairs, auditory cortex for symbol-sound pairs). Critically, retrieval also reactivated sensory cortex related to the no-longer relevant associate. Eighteen months later, only non-updated symbol-face associations were intact. Intriguingly, a subset of the updated associations was now treated as though the original association had taken over, in that memory performance was significantly worse than chance and that activity in sensory cortex for the original but not the updated associate correlated (negatively) with performance. Moreover, the degree of "residual" reactivation during day 5 inversely predicted memory performance 18 months later. Thus, updating of long-term memory involves adding new information to already existing networks, in which old information can stay resilient for a long time. Copyright © 2014. Published by Elsevier Inc.

How Long Should Routine EEG Be Recorded to Get Relevant Information?

Science.gov (United States)

Doudoux, Hannah; Skaare, Kristina; Geay, Thomas; Kahane, Philippe; Bosson, Jean L; Sabourdy, Cécile; Vercueil, Laurent

2017-03-01

The optimal duration of routine EEG (rEEG) has not been determined on a clinical basis. This study aims to determine the time required to obtain relevant information during rEEG with respect to the clinical request. All rEEGs performed over 3 months in unselected patients older than 14 years in an academic hospital were analyzed retrospectively. The latency required to obtain relevant information was determined for each rEEG by 2 independent readers blinded to the clinical data. EEG final diagnoses and latencies were analyzed with respect to the main clinical requests: subacute cognitive impairment, spells, transient focal neurologic manifestation or patients referred by epileptologists. From 430 rEEGs performed in the targeted period, 364 were analyzed: 92% of the pathological rEEGs were provided within the first 10 minutes of recording. Slowing background activity was diagnosed from the beginning, whereas interictal epileptiform discharges were recorded over time. Moreover, the time elapsed to demonstrate a pattern differed significantly in the clinical groups: in patients with subacute cognitive impairment, EEG abnormalities appeared within the first 10 minutes, whereas in the other groups, data could be provided over time. Patients with subacute cognitive impairment differed from those in the other groups significantly in the elapsed time required to obtain relevant information during rEEG, suggesting that 10-minute EEG recordings could be sufficient, arguing in favor of individualized rEEG. However, this conclusion does not apply to intensive care unit patients.

Microstructure of cheese: Processing, technological and microbiological considerations

OpenAIRE

Pereira, Cláudia I.; Gomes, Ana M. P.; Malcata, F. Xavier

2009-01-01

Cheese is a classical dairy product, which is strongly judged by its appearance and texture; hence, a renewed interest in its microstructure has been on the rise, as sophisticated techniques of analysis become more and more informative and widely available. Processing parameters that affect microstructure play a dominant role upon the features exhibited by the final product as perceived by the consumer; rational relationships between microstructure (which includes biochem...

Development of microstructure to optimise mechanical performance of power generation equipment

International Nuclear Information System (INIS)

Marshall, P.

1986-11-01

The factors responsible for the development of microstructure in CEGB construction ceramics and steels is assessed as a function of composition, thermomechanical treatment, thermal ageing and environmental degradation. The relationships between microstructure and mechanical properties (tensile, toughness, creep and fatigue) of relevance to structures operating in power generation equipment is then developed in quantitative terms. The conclusions from the assessment are as follows: 1 The relationship between microstructure and mechanical properties of construction ceramics and steels used in the power generation industry has been assessed. 2 Factors which significantly influence microstructure and thus mechanical properties are chemical composition, thermomechanical treatment, ageing and environmental degradation. The influence of such microstructural changes in tensile, toughness, fatigue and creep properties of ceramics and steels is assessed. 3 The benefits arising from an understanding of materials behaviour are discussed in terms of improved materials and the assessment of plant performance. (author)

Earlier saccades to task-relevant targets irrespective of relative gain between peripheral and foveal information.

Science.gov (United States)

Wolf, Christian; Schütz, Alexander C

2017-06-01

Saccades bring objects of interest onto the fovea for high-acuity processing. Saccades to rewarded targets show shorter latencies that correlate negatively with expected motivational value. Shorter latencies are also observed when the saccade target is relevant for a perceptual discrimination task. Here we tested whether saccade preparation is equally influenced by informational value as it is by motivational value. We defined informational value as the probability that information is task-relevant times the ratio between postsaccadic foveal and presaccadic peripheral discriminability. Using a gaze-contingent display, we independently manipulated peripheral and foveal discriminability of the saccade target. Latencies of saccades with perceptual task were reduced by 36 ms in general, but they were not modulated by the information saccades provide (Experiments 1 and 2). However, latencies showed a clear negative linear correlation with the probability that the target is task-relevant (Experiment 3). We replicated that the facilitation by a perceptual task is spatially specific and not due to generally heightened arousal (Experiment 4). Finally, the facilitation only emerged when the perceptual task is in the visual but not in the auditory modality (Experiment 5). Taken together, these results suggest that saccade latencies are not equally modulated by informational value as by motivational value. The facilitation by a perceptual task only arises when task-relevant visual information is foveated, irrespective of whether the foveation is useful or not.

Proactive Support of Internet Browsing when Searching for Relevant Health Information.

Science.gov (United States)

Rurik, Clas; Zowalla, Richard; Wiesner, Martin; Pfeifer, Daniel

2015-01-01

Many people use the Internet as one of the primary sources of health information. This is due to the high volume and easy access of freely available information regarding diseases, diagnoses and treatments. However, users may find it difficult to retrieve information which is easily understandable and does not require a deep medical background. In this paper, we present a new kind of Web browser add-on, in order to proactively support users when searching for relevant health information. Our add-on not only visualizes the understandability of displayed medical text but also provides further recommendations of Web pages which hold similar content but are potentially easier to comprehend.

Prioritising the relevant information for learning and decision making within orbital and ventromedial prefrontal cortex.

Science.gov (United States)

Walton, Mark E; Chau, Bolton K H; Kennerley, Steven W

2015-02-01

Our environment and internal states are frequently complex, ambiguous and dynamic, meaning we need to have selection mechanisms to ensure we are basing our decisions on currently relevant information. Here, we review evidence that orbitofrontal (OFC) and ventromedial prefrontal cortex (VMPFC) play conserved, critical but distinct roles in this process. While OFC may use specific sensory associations to enhance task-relevant information, particularly in the context of learning, VMPFC plays a role in ensuring irrelevant information does not impinge on the decision in hand.

A Parallel Relational Database Management System Approach to Relevance Feedback in Information Retrieval.

Science.gov (United States)

Lundquist, Carol; Frieder, Ophir; Holmes, David O.; Grossman, David

1999-01-01

Describes a scalable, parallel, relational database-drive information retrieval engine. To support portability across a wide range of execution environments, all algorithms adhere to the SQL-92 standard. By incorporating relevance feedback algorithms, accuracy is enhanced over prior database-driven information retrieval efforts. Presents…

Video coding and decoding devices and methods preserving ppg relevant information

NARCIS (Netherlands)

2013-01-01

The present invention relates to a video encoding device (10) for encoding video data and a corresponding video decoding device, wherein during decoding PPG relevant information shall be preserved. For this purpose the video coding device (10) comprises a first encoder (20) for encoding input video

Acoustic fine structure may encode biologically relevant information for zebra finches.

Science.gov (United States)

Prior, Nora H; Smith, Edward; Lawson, Shelby; Ball, Gregory F; Dooling, Robert J

2018-04-18

The ability to discriminate changes in the fine structure of complex sounds is well developed in birds. However, the precise limit of this discrimination ability and how it is used in the context of natural communication remains unclear. Here we describe natural variability in acoustic fine structure of male and female zebra finch calls. Results from psychoacoustic experiments demonstrate that zebra finches are able to discriminate extremely small differences in fine structure, which are on the order of the variation in acoustic fine structure that is present in their vocal signals. Results from signal analysis methods also suggest that acoustic fine structure may carry information that distinguishes between biologically relevant categories including sex, call type and individual identity. Combined, our results are consistent with the hypothesis that zebra finches can encode biologically relevant information within the fine structure of their calls. This study provides a foundation for our understanding of how acoustic fine structure may be involved in animal communication.

A Planetary Defense Gateway for Smart Discovery of relevant Information for Decision Support

Science.gov (United States)

Bambacus, Myra; Yang, Chaowei Phil; Leung, Ronald Y.; Barbee, Brent; Nuth, Joseph A.; Seery, Bernard; Jiang, Yongyao; Qin, Han; Li, Yun; Yu, Manzhu;

Disseminating relevant health information to underserved audiences: implications of the Digital Divide Pilot Projects.

Science.gov (United States)

Kreps, Gary L

2005-10-01

This paper examines the influence of the digital divide on disparities in health outcomes for vulnerable populations, identifying implications for medical and public libraries. The paper describes the results of the Digital Divide Pilot Projects demonstration research programs funded by the National Cancer Institute to test new strategies for disseminating relevant health information to underserved and at-risk audiences. The Digital Divide Pilot Projects field-tested innovative systemic strategies for helping underserved populations access and utilize relevant health information to make informed health-related decisions about seeking appropriate health care and support, resisting avoidable and significant health risks, and promoting their own health. The paper builds on the Digital Divide Pilot Projects by identifying implications for developing health communication strategies that libraries can adopt to provide digital health information to vulnerable populations.

Video coding and decoding devices and methods preserving PPG relevant information

NARCIS (Netherlands)

2015-01-01

The present invention relates to a video encoding device (10, 10', 10") and method for encoding video data and to a corresponding video decoding device (60, 60') and method. To preserve PPG relevant information after encoding without requiring a large amount of additional data for the video encoder

Video coding and decoding devices and methods preserving ppg relevant information

NARCIS (Netherlands)

2013-01-01

The present invention relates to a video encoding device (10, 10', 10'') and method for encoding video data and to a corresponding video decoding device (60, 60') and method. To preserve PPG relevant information after encoding without requiring a large amount of additional data for the video encoder

Perceived relevance and information needs regarding food topics and preferred information sources among Dutch adults: results of a quantitative consumer study

NARCIS (Netherlands)

Dillen, van S.M.E.; Hiddink, G.J.; Koelen, M.A.; Graaf, de C.; Woerkum, van C.M.J.

2004-01-01

Objective: For more effective nutrition communication, it is crucial to identify sources from which consumers seek information. Our purpose was to assess perceived relevance and information needs regarding food topics, and preferred information sources by means of quantitative consumer research.

Refractive Index Measurement of Liquids Based on Microstructured Optical Fibers

Directory of Open Access Journals (Sweden)

Susana Silva

2014-12-01

Full Text Available This review is focused on microstructured optical fiber sensors developed in recent years for liquid RI sensing. The review is divided into three parts: the first section introduces a general view of the most relevant refractometric sensors that have been reported over the last thirty years. Section 2 discusses several microstructured optical fiber designs, namely, suspended-core fiber, photonic crystal fiber, large-core air-clad photonic crystal fiber, and others. This part is also divided into two main groups: the interferometric-based and resonance-based configurations. The sensing methods rely either on full/selective filling of the microstructured fiber air holes with a liquid analyte or by simply immersing the sensing fiber into the liquid analyte. The sensitivities and resolutions are tabled at the end of this section followed by a brief discussion of the obtained results. The last section concludes with some remarks about the microstructured fiber-based configurations developed for RI sensing and their potential for future applications.

High-Resolution Characterization of UMo Alloy Microstructure

Energy Technology Data Exchange (ETDEWEB)

Devaraj, Arun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kovarik, Libor [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jana, Saumyadeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Manandhar, Sandeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Arey, Bruce W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-11-30

This report highlights the capabilities and procedure for high-resolution characterization of UMo fuels in PNNL. Uranium-molybdenum (UMo) fuel processing steps, from casting to forming final fuel, directly affect the microstructure of the fuel, which in turn dictates the in-reactor performance of the fuel under irradiation. In order to understand the influence of processing on UMo microstructure, microstructure characterization techniques are necessary. Higher-resolution characterization techniques like transmission electron microscopy (TEM) and atom probe tomography (APT) are needed to interrogate the details of the microstructure. The findings from TEM and APT are also directly beneficial for developing predictive multiscale modeling tools that can predict the microstructure as a function of process parameters. This report provides background on focused-ion-beam–based TEM and APT sample preparation, TEM and APT analysis procedures, and the unique information achievable through such advanced characterization capabilities for UMo fuels, from a fuel fabrication capability viewpoint.

Mapping White Matter Microstructure in the One Month Human Brain.

Science.gov (United States)

Dean, D C; Planalp, E M; Wooten, W; Adluru, N; Kecskemeti, S R; Frye, C; Schmidt, C K; Schmidt, N L; Styner, M A; Goldsmith, H H; Davidson, R J; Alexander, A L

2017-08-29

White matter microstructure, essential for efficient and coordinated transmission of neural communications, undergoes pronounced development during the first years of life, while deviations to this neurodevelopmental trajectory likely result in alterations of brain connectivity relevant to behavior. Hence, systematic evaluation of white matter microstructure in the normative brain is critical for a neuroscientific approach to both typical and atypical early behavioral development. However, few studies have examined the infant brain in detail, particularly in infants under 3 months of age. Here, we utilize quantitative techniques of diffusion tensor imaging and neurite orientation dispersion and density imaging to investigate neonatal white matter microstructure in 104 infants. An optimized multiple b-value diffusion protocol was developed to allow for successful acquisition during non-sedated sleep. Associations between white matter microstructure measures and gestation corrected age, regional asymmetries, infant sex, as well as newborn growth measures were assessed. Results highlight changes of white matter microstructure during the earliest periods of development and demonstrate differential timing of developing regions and regional asymmetries. Our results contribute to a growing body of research investigating the neurobiological changes associated with neurodevelopment and suggest that characteristics of white matter microstructure are already underway in the weeks immediately following birth.

Stainless steel valves with enhanced performance through microstructure optimization

Science.gov (United States)

Barani, A. A.; Boukhattam, M.; Haggeney, M.; Güler, S.

2017-08-01

Compressor valves are made of hardened and tempered martensitic steels. The main design criterion for the material selection is the fatigue performance of the material under bending loads. In some cases impact loads and corrosive atmospheres additionally act on the part. For the first time, the microstructure of the most commonly used stainless steel and its influence on the properties relevant for flapper valves is presented and described in this paper. It is demonstrated how the tensile properties of a martensitic stainless steel can be enhanced by tailoring the microstructure. Electron back scatter diffraction method is carried out to explain the changes in monotonic mechanical properties. Through a modified heat treatment the martensite microstructure is refined resulting in an increase of yield and ultimate tensile strength and at the same time a significant increase of elongation.

Disseminating relevant health information to underserved audiences: implications of the Digital Divide Pilot Projects*

Science.gov (United States)

Kreps, Gary L.

2005-01-01

Objective: This paper examines the influence of the digital divide on disparities in health outcomes for vulnerable populations, identifying implications for medical and public libraries. Method: The paper describes the results of the Digital Divide Pilot Projects demonstration research programs funded by the National Cancer Institute to test new strategies for disseminating relevant health information to underserved and at-risk audiences. Results: The Digital Divide Pilot Projects field-tested innovative systemic strategies for helping underserved populations access and utilize relevant health information to make informed health-related decisions about seeking appropriate health care and support, resisting avoidable and significant health risks, and promoting their own health. Implications: The paper builds on the Digital Divide Pilot Projects by identifying implications for developing health communication strategies that libraries can adopt to provide digital health information to vulnerable populations. PMID:16239960

Proof, interpretation and evaluation of radiation-induced microstructural changes in WWER reactor pressure vessel steels

International Nuclear Information System (INIS)

Boehmert, J.; Gokhman, A.; Grosse, M.; Ulbricht, A.

2003-06-01

Neutron embrittlement is a special issue for the VVER-type reactors. One of the fundamentals for a reliable assessment of the current material state is knowledge of the causes and mechanisms of neutron embrittlement. The aim of the project is to understand and to quantify the microstructural appearances due to neutron radiation in VVER-type reactor pressure vessel steels. The material base is a broad variation of irradiation probes taken from the irradiation programme Rheinsberg, surveillance programmes of Russian, Ukrainian or Hungarian NPPs or irradiation experiments with mockup-alloys. The microstructure was investigated by different methods. The small angle neutron scattering (SANS) proved to be the most suitable method. A procedure was developed to determine mean diameter, size distribution and volume fraction of irradiation-induced microstructure from SANS experiments in a reliable and comparable manner. With this method microstructural parameters were systematically determined and the main factors of influence were identified. Apart from the neutron fluence the volume fraction of radiation defects mainly changes with the copper or nickel content whereas phosphorus is hardly relevant. Annealing remedies the radiation-induced microstructural appearances. The ratio between nuclear and magnetic neutron scattering provides information on the type of radiation defects. This leads to the conclusion that the material composition changes the radiation defects. The change occurs gradually rather than abruptly. The radiation defects detected by SANS correlate with the radiation hardening and embrittlement. Generally, the results suggest a bimodal mechanism due to radiation-enhanced and radiation-induced defect evolution. A kinetic model on base of the rate theory approach was established. (orig.)

Effect of the Adoption of IFRS on the Information Relevance of Accounting Profits in Brazil

Directory of Open Access Journals (Sweden)

Mateus Alexandre Costa dos Santos

2014-12-01

Full Text Available This study aimed to assess the effect of adopting the International Financial Reporting Standards (IFRS in Brazil on the information relevance of accounting profits of publicly traded companies. International studies have shown that the adoption of IFRS improves the quality of accounting information compared with domestic accounting standards. Concurrent evidence is sparse in Brazil. Information relevance is understood herein as a multidimensional attribute that is closely related to the quality and usefulness of the information conveyed by accounting profits. The associative capacity and information timeliness of accounting profits in relation to share prices were examined. Furthermore, the level of conditional conservatism present in accounting profits was also analyzed because according to Basu (1997, this aspect is related to timeliness. The study used pooled regressions and panel data models to analyze the quarterly accounting profits of 246 companies between the first quarter of 1999 and the first quarter of 2013, resulting in 9,558 quarter-company observations. The results indicated that the adoption of IFRS in Brazil (1 increased the associative capacity of accounting profits; (2 reduced information timeliness to non-significant levels; and (3 had no effect on conditional conservatism. The joint analysis of the empirical evidence from the present study conclusively precludes stating that the adoption of IFRS in Brazil contributed to an increase the information relevance of accounting profits of publicly traded companies.

Perceived Relevance of an Introductory Information Systems Course to Prospective Business Students

Directory of Open Access Journals (Sweden)

Irene Govender

2013-12-01

Full Text Available The study is designed to examine students’ perceptions of the introductory Information Systems (IS course. It was an exploratory study in which 67 students participated. A quantitative approach was followed making use of questionnaires for the collection of data. Using the theory of reasoned action as a framework, the study explores the factors that influence non-IS major students’ perceived relevance of the IS introductory course. The analysis of collected data included descriptive and inferential statistics. Using multiple regression analysis, the results suggest that overall, the independent variables, relevance of the content, previous IT knowledge, relevance for professional practice, IT preference in courses and peers’ influence may account for 72% of the explanatory power for the dependent variable, perceived relevance of the IS course. In addition, the results have shown some strong predictors (IT preference and peers’ influence that influence students’ perceived relevance of the IS course. Practical work was found to be a strong mediating variable toward positive perceptions of IS. The results of this study suggest that students do indeed perceive the introductory IS course to be relevant and match their professional needs, but more practical work would enhance their learning. Implications for theory and practice are discussed as a result of the behavioural intention to perceive the IS course to be relevant and eventually to recruit more IS students.

Behavioral and Event-Related-Potential Correlates of Processing Congruent and Incongruent Self-Relevant Information

Science.gov (United States)

Clark, Sheri L.

2013-01-01

People want to be viewed by others as they view themselves. Being confronted with self-relevant information that is either congruent or incongruent with one's self-view has been shown to differentially affect subsequent behavior, memory for the information, and evaluation of the source of the information. However, no research has examined…

Suppression of no-longer relevant information in Working Memory: An alpha-power related mechanism?

Science.gov (United States)

Poch, Claudia; Valdivia, María; Capilla, Almudena; Hinojosa, José Antonio; Campo, Pablo

2018-03-27

Selective attention can enhance Working Memory (WM) performance by selecting relevant information, while preventing distracting items from encoding or from further maintenance. Alpha oscillatory modulations are a correlate of visuospatial attention. Specifically, an enhancement of alpha power is observed in the ipsilateral posterior cortex to the locus of attention, along with a suppression in the contralateral hemisphere. An influential model proposes that the alpha enhancement is functionally related to the suppression of information. However, whether ipsilateral alpha power represents a mechanism through which no longer relevant WM representations are inhibited has yet not been explored. Here we examined whether the amount of distractors to be suppressed during WM maintenance is functionally related to alpha power lateralized activity. We measure EEG activity while participants (N = 36) performed a retro-cue task in which the WM load was varied across the relevant/irrelevant post-cue hemifield. We found that alpha activity was lateralized respect to the locus of attention, but did not track post-cue irrelevant load. Additionally, non-lateralized alpha activity increased with post-cue relevant load. We propose that alpha lateralization associated to retro-cuing might be related to a general orienting mechanism toward relevant representation. Copyright © 2018 Elsevier B.V. All rights reserved.

Evolution of microstructure in face centered cubic metals during irradiation: A review

International Nuclear Information System (INIS)

Garner, F.A.

1993-06-01

When fcc metals and alloys are irradiated at elevated temperatures, they tend to evolve toward saturation microstructures that are independent of the starting state of the metal and the early details of irradiation history. This leads to property changes and rates of dimensional change that also eventually become independent of the starting state. The evolution of microstructure in complex alloys, especially during the transient regime, is usually determined by the complex interaction of many microstructural and microchemical processes. The more complex the alloy, the more difficult it is to-identify and define the separate influence of each participating mechanism. The use of irradiation studies conducted on simple metals or model alloys assists in understanding the behavior of alloys of engineering relevance. A review of such studies shows that a number of prevailing perceptions of radiation-induced microstructural evolution are not universally correct

Task relevance of emotional information affects anxiety-linked attention bias in visual search.

Science.gov (United States)

Dodd, Helen F; Vogt, Julia; Turkileri, Nilgun; Notebaert, Lies

2017-01-01

Task relevance affects emotional attention in healthy individuals. Here, we investigate whether the association between anxiety and attention bias is affected by the task relevance of emotion during an attention task. Participants completed two visual search tasks. In the emotion-irrelevant task, participants were asked to indicate whether a discrepant face in a crowd of neutral, middle-aged faces was old or young. Irrelevant to the task, target faces displayed angry, happy, or neutral expressions. In the emotion-relevant task, participants were asked to indicate whether a discrepant face in a crowd of middle-aged neutral faces was happy or angry (target faces also varied in age). Trait anxiety was not associated with attention in the emotion-relevant task. However, in the emotion-irrelevant task, trait anxiety was associated with a bias for angry over happy faces. These findings demonstrate that the task relevance of emotional information affects conclusions about the presence of an anxiety-linked attention bias. Copyright © 2016 Elsevier B.V. All rights reserved.

Collecting Safeguards Relevant Trade Information: The IAEA Procurement Outreach Programme

International Nuclear Information System (INIS)

Schot, P.; El Gebaly, A.; Tarvainen, M.

2010-01-01

The increasing awareness of activities of transnational procurement networks to covertly acquire sensitive nuclear related dual use equipment prompted an evolution of safeguards methodologies. One of the responses to this challenge by the Department of Safeguards in the IAEA was to establish the Trade and Technology Unit (TTA) in November 2004 to analyse and report on these covert nuclear related trade activities. To obtain information relevant to this analysis, TTA is engaging States that might be willing to provide this information to the Secretariat on a voluntary basis. This paper will give an overview of current activities, sum up the results achieved and discuss suggestions to further improve this programme made by Member States. (author)

Microstructure of Tablet-Pharmaceutical Significance, Assessment, and Engineering.

Science.gov (United States)

Sun, Changquan Calvin

2017-05-01

To summarize the microstructure - property relationship of pharmaceutical tablets and approaches to improve tablet properties through tablet microstructure engineering. The main topics reviewed here include: 1) influence of material properties and manufacturing process parameters on the evolution of tablet microstructure; 2) impact of tablet structure on tablet properties; 3) assessment of tablet microstructure; 4) development and engineering of tablet microstructure. Microstructure plays a decisive role on important pharmaceutical properties of a tablet, such as disintegration, drug release, and mechanical strength. Useful information on mechanical properties of a powder can be obtained from analyzing tablet porosity-pressure data. When helium pycnometry fails to accurately measure true density of a water-containing powder, non-linear regression of tablet density-pressure data is a useful alternative method. A component that is more uniformly distributed in a tablet generally exerts more influence on the overall tablet properties. During formulation development, it is highly recommended to examine the relationship between any property of interest and tablet porosity when possible. Tablet microstructure can be engineered by judicious selection of formulation composition, including the use of the optimum solid form of the drug and appropriate type and amount of excipients, and controlling manufacturing process.

Microstructural degradation of Ni-YSZ anodes for solid oxide fuel cells

DEFF Research Database (Denmark)

Thydén, Karl Tor Sune

2008-01-01

-reforming catalysis. In the context of electrochemically tested and technologically relevant cells, the majority of the microstructural work is performed on a cell tested at 850°C under relatively severe conditions for 17,500 hours. It is demonstrated that the major Ni rearrangements take place at the interface...... are of technological relevance, it is difficult to identify the effect from isolated parameters such as temperature, fuel gas composition and polarization. Model studies of high temperature aged Ni-YSZ cermets are generally performed in atmospheres containing relatively low concentrations of H2O. In this work......, the microstructural degradation in both electrochemically longterm tested cells and high-temperature aged model materials are studied. Since Ni particle sintering / coarsening is attributed to be the major cause of anode degradation, this subject attains the primary focus. A large part of the work is focused...

The impact of intangibles on the value relevance of accounting information: Evidence from French companies

Directory of Open Access Journals (Sweden)

Bilal Kimouche

2016-03-01

Full Text Available Purpose: The paper aims to explore whether intangible items that recognised in financial statements are value-relevant to investors in the French context, and whether these items affect the value relevance of accounting information. Design/methodology/approach: Empirical data were collected from a sample of French listed companies, over the nine-year period of 2005 to 2013. Starting of Ohlson’s (1995 model, the correlation analysis and the linear multiple regressions have been applied. Findings: We find that intangibles and traditional accounting measures as a whole are value relevant. However, the amortization and impairment charges of intangibles and cash flows do not affect the market values of French companies, unlike other variables, which affect positively and substantially the market values. Also goodwill and book values are more associated with market values than intangible assets and earnings respectively. Finally, we find that intangibles have improved the value relevance of accounting information. Practical implications: French legislators must give more interest for intangibles, in order to enrich the financial statements content and increasing the pertinence of accounting information. Auditors must give more attention for intangibles’ examination process, in order to certify the amounts related to intangibles in financial statements, and hence enrich their reliability, what provides adequacy guarantees for investors to use them in decision making. Originality/value: The paper used recently available financial data, and proposed an improvement concerning the measure of incremental value relevance of intangibles items.

Soft X-ray spectromicroscopy and application to semiconductor microstructure characterization

International Nuclear Information System (INIS)

Gozzo, F.; Franck, K.; Howells, M.R.; Hussain, Z.; Warwick, A.; Padmore, H.A.; Triplett, B.B.

1997-01-01

The universal trend towards device miniaturization has driven the semiconductor industry to develop sophisticated and complex instrumentation for the characterization of microstructures. Many significant problems of relevance to the semiconductor industry cannot be solved by conventional analysis techniques, but can be addressed with soft x-ray spectromicroscopy. An active spectromicroscopy program is being developed at thr Advanced Light Source, attracting both the semiconductor industry and the materials science academic community. Examples of spectromicroscopy techniques are presented. An Advanced Light Source μ-XPS spectromicroscopy project is discussed, involving the first microscope completely dedicated and designed for microstructure analysis on patterned silicon wafers. (author)

In the Dark: Young Men's Stories of Sexual Initiation in the Absence of Relevant Sexual Health Information

Science.gov (United States)

Kubicek, Katrina; Beyer, William J.; Weiss, George; Iverson, Ellen; Kipke, Michele D.

2010-01-01

A growing body of research has investigated the effectiveness of abstinence-only sexual education. There remains a dearth of research on the relevant sexual health information available to young men who have sex with men (YMSM). Drawing on a mixed-methods study with 526 YMSM, this study explores how and where YMSM receive relevant information on…

Feature-selective Attention in Frontoparietal Cortex: Multivoxel Codes Adjust to Prioritize Task-relevant Information.

Science.gov (United States)

Jackson, Jade; Rich, Anina N; Williams, Mark A; Woolgar, Alexandra

2017-02-01

Human cognition is characterized by astounding flexibility, enabling us to select appropriate information according to the objectives of our current task. A circuit of frontal and parietal brain regions, often referred to as the frontoparietal attention network or multiple-demand (MD) regions, are believed to play a fundamental role in this flexibility. There is evidence that these regions dynamically adjust their responses to selectively process information that is currently relevant for behavior, as proposed by the "adaptive coding hypothesis" [Duncan, J. An adaptive coding model of neural function in prefrontal cortex. Nature Reviews Neuroscience, 2, 820-829, 2001]. Could this provide a neural mechanism for feature-selective attention, the process by which we preferentially process one feature of a stimulus over another? We used multivariate pattern analysis of fMRI data during a perceptually challenging categorization task to investigate whether the representation of visual object features in the MD regions flexibly adjusts according to task relevance. Participants were trained to categorize visually similar novel objects along two orthogonal stimulus dimensions (length/orientation) and performed short alternating blocks in which only one of these dimensions was relevant. We found that multivoxel patterns of activation in the MD regions encoded the task-relevant distinctions more strongly than the task-irrelevant distinctions: The MD regions discriminated between stimuli of different lengths when length was relevant and between the same objects according to orientation when orientation was relevant. The data suggest a flexible neural system that adjusts its representation of visual objects to preferentially encode stimulus features that are currently relevant for behavior, providing a neural mechanism for feature-selective attention.

Essays on Market Microstructure, Behavioral Finance, and Asset Management

Science.gov (United States)

Jochec, Marek

2009-01-01

This is a study on various aspects of market microstructure, behavioral finance and asset management. In the first chapter we put the PIN variable (Probability of Information-based trading) to test. The PIN variable has been used extensively in the microstructure literature despite the fact that its construction is based on rather strong…

Analysis of the Relevance of Information Content of the Value Added Statement in the Brazilian Capital Markets

Directory of Open Access Journals (Sweden)

Márcio André Veras Machado

2015-04-01

Full Text Available The usefulness of financial statements depends, fundamentally, on the degree of relevance of the information they disclose to users. Thus, studies that measure the relevance of accounting information to the users of financial statements are of some importance. One line of research within this subject is in ascertaining the relevance and importance of accounting information for the capital markets: if a particular item of accounting information is minimally reflected in the price of a share, it is because this information has relevance, at least at a certain level of significance, for investors and analysts of the capital markets. This present study aims to analyze the relevance, in the Brazilian capital markets, of the information content of the Value Added Statement (or VAS - referred to in Brazil as the Demonstração do Valor Adicionado, or DVA. It analyzed the ratio between stock price and Wealth created per share (WCPS, using linear regressions, for the period 2005-2011, for non-financial listed companies included in Melhores & Maiores ('Biggest & Best', an annual listing published by Exame Magazine in Brazil. As a secondary objective, this article seeks to establish whether WCPS represents a better indication of a company's result than Net profit per share (in this study, referred to as NPPS. The empirical evidence that was found supports the concept that the VAS has relevant information content, because it shows a capacity to explain a variation in the share price of the companies studied. Additionally, the relationship between WCPS and the stock price was shown to be significant, even after the inclusion of the control variables Stockholders' equity per share (which we abbreviate in this study to SEPS and NPPS. Finally, the evidence found indicates that the market reacts more to WCPS (Wealth created per share than to NPPS. Thus, the results obtained give some indication that, for the Brazilian capital markets, WCPS may be a better proxy

40 CFR 86.1862-04 - Maintenance of records and submittal of information relevant to compliance with fleet average NOX...

Science.gov (United States)

2010-07-01

... of information relevant to compliance with fleet average NOX standards. 86.1862-04 Section 86.1862-04...-Cycle Heavy-Duty Vehicles § 86.1862-04 Maintenance of records and submittal of information relevant to..., maintain, and retain the following information in adequately organized and indexed records for each model...

Imaging brain microstructure with diffusion MRI: practicality and applications.

Science.gov (United States)

Alexander, Daniel C; Dyrby, Tim B; Nilsson, Markus; Zhang, Hui

2017-11-29

This article gives an overview of microstructure imaging of the brain with diffusion MRI and reviews the state of the art. The microstructure-imaging paradigm aims to estimate and map microscopic properties of tissue using a model that links these properties to the voxel scale MR signal. Imaging techniques of this type are just starting to make the transition from the technical research domain to wide application in biomedical studies. We focus here on the practicalities of both implementing such techniques and using them in applications. Specifically, the article summarizes the relevant aspects of brain microanatomy and the range of diffusion-weighted MR measurements that provide sensitivity to them. It then reviews the evolution of mathematical and computational models that relate the diffusion MR signal to brain tissue microstructure, as well as the expanding areas of application. Next we focus on practicalities of designing a working microstructure imaging technique: model selection, experiment design, parameter estimation, validation, and the pipeline of development of this class of technique. The article concludes with some future perspectives on opportunities in this topic and expectations on how the field will evolve in the short-to-medium term. Copyright © 2017 John Wiley & Sons, Ltd.

What lies beneath? Diffusion EAP-based study of brain tissue microstructure.

Science.gov (United States)

Zucchelli, Mauro; Brusini, Lorenza; Andrés Méndez, C; Daducci, Alessandro; Granziera, Cristina; Menegaz, Gloria

2016-08-01

Diffusion weighted magnetic resonance signals convey information about tissue microstructure and cytoarchitecture. In the last years, many models have been proposed for recovering the diffusion signal and extracting information to constitute new families of numerical indices. Two main categories of reconstruction models can be identified in diffusion magnetic resonance imaging (DMRI): ensemble average propagator (EAP) models and compartmental models. From both, descriptors can be derived for elucidating the underlying microstructural architecture. While compartmental models indices directly quantify the fraction of different cell compartments in each voxel, EAP-derived indices are only a derivative measure and the effect of the different microstructural configurations on the indices is still unclear. In this paper, we analyze three EAP indices calculated using the 3D Simple Harmonic Oscillator based Reconstruction and Estimation (3D-SHORE) model and estimate their changes with respect to the principal microstructural configurations. We take advantage of the state of the art simulations to quantify the variations of the indices with the simulation parameters. Analysis of in-vivo data correlates the EAP indices with the microstructural parameters obtained from the Neurite Orientation Dispersion and Density Imaging (NODDI) model as a pseudo ground truth for brain data. Results show that the EAP derived indices convey information on the tissue microstructure and that their combined values directly reflect the configuration of the different compartments in each voxel. Copyright © 2016 Elsevier B.V. All rights reserved.

Strategic relevance and accountability expectations: new perspectives for health care information technology design.

Science.gov (United States)

Tan, J K; Modrow, R E

1999-05-01

In this article, we discuss the traditional systems analysis perspective on end-user information requirements analysis and extend it to merge with the new accountability expectations perspective to guide the future planning and design of health organization information systems. Underlying the strategic relevance of health care information technology (HCIT) are three critical questions: (1) What is the ideal HCIT model for the health organization in terms of achieving strategic expertise and competitive advantage? Specifically, how does this model link industry performance standards with organizational performance and accountability expectations? (2) How should the limitations of past HCIT models be reconciled to the benefits presented by the superior arrangement of the ideal model in the context of changing accountability expectations? (3) How should alternative HCIT solutions be evaluated in light of evidence-based accountability and organizational performance benchmarking? Insights into these questions will ensure that health care managers, HCIT practitioners and researchers can continue to focus on the most critical issues in harnessing today's fast-paced changing technologies for evolving strategically relevant, performance-based health organization systems.

Relevant cost information for order acceptance decisions

NARCIS (Netherlands)

Wouters, M.J.F.

1997-01-01

Some economic considerations for order acceptance decisions are discussed. The relevant economic considerations for order acceptance are widely discussed in the literature: only those costs are relevant which would be avoidable by not accepting the order incremental costs plus opportunity costs .

Divided attention selectively impairs memory for self-relevant information.

Science.gov (United States)

Turk, David J; Brady-van den Bos, Mirjam; Collard, Philip; Gillespie-Smith, Karri; Conway, Martin A; Cunningham, Sheila J

2013-05-01

Information that is relevant to oneself tends to be remembered more than information that relates to other people, but the role of attention in eliciting this "self-reference effect" is unclear. In the present study, we assessed the importance of attention in self-referential encoding using an ownership paradigm, which required participants to encode items under conditions of imagined ownership by themselves or by another person. Previous work has established that this paradigm elicits a robust self-reference effect, with more "self-owned" items being remembered than "other-owned" items. Access to attentional resources was manipulated using divided-attention tasks at encoding. A significant self-reference effect emerged under full-attention conditions and was related to an increase in episodic recollection for self-owned items, but dividing attention eliminated this memory advantage. These findings are discussed in relation to the nature of self-referential cognition and the importance of attentional resources at encoding in the manifestation of the self-reference effect in memory.

An analysis of contextual information relevant to medical care unexpectedly volunteered to researchers by asthma patients.

Science.gov (United States)

Black, Heather L; Priolo, Chantel; Gonzalez, Rodalyn; Geer, Sabrina; Adam, Bariituu; Apter, Andrea J

2012-09-01

To describe and categorize contextual information relevant to patients' medical care unexpectedly volunteered to research personnel as part of a patient advocate (PA) intervention to facilitate access health care, communication with medical personnel, and self-management of a chronic disease such as asthma. We adapted a patient navigator intervention, to overcome barriers to access and communication for adults with moderate or severe asthma. Informed by focus groups of patients and providers, our PAs facilitated preparation for a visit with an asthma provider, attended the visit, confirmed understanding, and assisted with post-visit activities. During meetings with researchers, either for PA activities or for data collection, participants frequently volunteered personal and medical information relevant for achieving successful self-management that was not routinely shared with medical personnel. For this project, researchers journaled information not captured by the structured questionnaires and protocol. Using a qualitative analysis, we describe (1) researchers' journals of these unique communications; (2) their relevance for accomplishing self-management; (3) PAs' formal activities including teach-back, advocacy, and facilitating appointment making; and (4) observations of patients' interactions with the clinical practices. In 83 journals, patients' social support (83%), health (68%), and deportment (69%) were described. PA assistance with navigating the medical system (59%), teach-back (46%), and observed interactions with patient and medical staff (76%) were also journaled. Implicit were ways patients and practices could overcome barriers to access and communication. These journals describe the importance of seeking contextual and medically relevant information from all patients and, especially, those with significant morbidities, prompting patients for barriers to access to health care, and confirming understanding of medical information.

Alterations of bone microstructure and strength in end-stage renal failure.

Science.gov (United States)

Trombetti, A; Stoermann, C; Chevalley, T; Van Rietbergen, B; Herrmann, F R; Martin, P-Y; Rizzoli, R

2013-05-01

End-stage renal disease (ESRD) patients have a high risk of fractures. We evaluated bone microstructure and finite-element analysis-estimated strength and stiffness in patients with ESRD by high-resolution peripheral computed tomography. We observed an alteration of cortical and trabecular bone microstructure and of bone strength and stiffness in ESRD patients. Fragility fractures are common in ESRD patients on dialysis. Alterations of bone microstructure contribute to skeletal fragility, independently of areal bone mineral density. We compared microstructure and finite-element analysis estimates of strength and stiffness by high-resolution peripheral quantitative computed tomography (HR-pQCT) in 33 ESRD patients on dialysis (17 females and 16 males; mean age, 47.0 ± 12.6 years) and 33 age-matched healthy controls. Dialyzed women had lower radius and tibia cortical density with higher radius cortical porosity and lower tibia cortical thickness, compared to controls. Radius trabecular number was lower with higher heterogeneity of the trabecular network. Male patients displayed only a lower radius cortical density. Radius and tibia cortical thickness correlated negatively with bone-specific alkaline phosphatase (BALP). Microstructure did not correlate with parathyroid hormone (PTH) levels. Cortical porosity correlated positively with "Kidney Disease: Improving Global Outcomes" working group PTH level categories (r = 0.36, p microstructure and calculated bone strength are altered in ESRD patients, predominantly in women. Bone microstructure and biomechanical assessment by HR-pQCT may be of major clinical relevance in the evaluation of bone fragility in ESRD patients.

Micro-computer system for quantitative image analysis of damage microstructure

International Nuclear Information System (INIS)

Kohyama, A.; Kohno, Y.; Satoh, K.; Igata, N.

1984-01-01

Quantitative image analysis of radiation induced damage microstructure is very important in evaluating material behaviors in radiation environment. But, quite a few improvement have been seen in quantitative analysis of damage microstructure in these decades. The objective of this work is to develop new system for quantitative image analysis of damage microstructure which could improve accuracy and efficiency of data sampling and processing and could enable to get new information about mutual relations among dislocations, precipitates, cavities, grain boundaries, etc. In this system, data sampling is done with X-Y digitizer. The cavity microstructure in dual-ion irradiated 316 SS is analyzed and the effectiveness of this system is discussed. (orig.)

Study of mechanism on microstructure refinement during compact strip production process

International Nuclear Information System (INIS)

Yu Hao; Kang Yonglin; Wang Kelu; Fu Jie; Wang Zhongbing; Liu Delu

2003-01-01

In this study, microstructures of 1.9 mm hot strip steel produced by compact strip production (CSP) are investigated by using optical metallograph observation and electron back-scattered diffraction (EBSD) data to deduce the status of hot rolled austenite before phase transformation, because the evolution of hot rolled austenite is important to provide information for the microstructure refinement. The experimental results show that the finishing hot rolled microstructure is a mixture of recrystallized and deformed austenite, and the percentage of recrystallized austenite is greater than that of the deformed austenite. At last, microstructure evolution of austenite is modeled based on chemical compositions and techniques of producing 1.9 mm hot strip. The simulation results agree well with experimental data. Analysis shows that microstructure refinement, recrystallization and supercooling rate are the primary causes to fine microstructure

Soft X-ray spectromicroscopy and its application to semiconductor microstructure characterization

International Nuclear Information System (INIS)

Gozzo, F.; Franck, K.; Howells, M.R.; Hussain, Z.

1996-01-01

The universal trend towards device miniaturization has driven the semiconductor industry to develop sophisticated and complex instrumentation for the characterization of microstructures. Many significant problems of relevance to the semiconductor industry cannot be solved with conventional analysis techniques, but can be addressed with soft x-ray spectromicroscopy. An active spectromicroscopy program is being developed at the Advanced Light Source, attracting both the semiconductor industry and the materials science academic community. Examples of spectromicroscopy techniques are presented. An ALS(mu)-XPS spectromicroscopy project is discussed, involving the first microscope completely dedicated and designed for microstructure analysis on patterned silicon wafers

Towards brain-activity-controlled information retrieval: Decoding image relevance from MEG signals.

Science.gov (United States)

Kauppi, Jukka-Pekka; Kandemir, Melih; Saarinen, Veli-Matti; Hirvenkari, Lotta; Parkkonen, Lauri; Klami, Arto; Hari, Riitta; Kaski, Samuel

2015-05-15

We hypothesize that brain activity can be used to control future information retrieval systems. To this end, we conducted a feasibility study on predicting the relevance of visual objects from brain activity. We analyze both magnetoencephalographic (MEG) and gaze signals from nine subjects who were viewing image collages, a subset of which was relevant to a predetermined task. We report three findings: i) the relevance of an image a subject looks at can be decoded from MEG signals with performance significantly better than chance, ii) fusion of gaze-based and MEG-based classifiers significantly improves the prediction performance compared to using either signal alone, and iii) non-linear classification of the MEG signals using Gaussian process classifiers outperforms linear classification. These findings break new ground for building brain-activity-based interactive image retrieval systems, as well as for systems utilizing feedback both from brain activity and eye movements. Copyright © 2015 Elsevier Inc. All rights reserved.

Accelerated Irradiations for High Dose Microstructures in Fast Reactor Alloys

Energy Technology Data Exchange (ETDEWEB)

Jiao, Zhijie [Univ. of Michigan, Ann Arbor, MI (United States)

2017-03-31

The objective of this project is to determine the extent to which high dose rate, self-ion irradiation can be used as an accelerated irradiation tool to understand microstructure evolution at high doses and temperatures relevant to advanced fast reactors. We will accomplish the goal by evaluating phase stability and swelling of F-M alloys relevant to SFR systems at very high dose by combining experiment and modeling in an effort to obtain a quantitative description of the processes at high and low damage rates.

Material microstructures analyzed by using gray level Co-occurrence matrices

International Nuclear Information System (INIS)

Hu Yansu; Wang Zhijun; Fan Xiaoguang; Li Junjie; Gao Ang

2017-01-01

The mechanical properties of materials greatly depend on the microstructure morphology. The quantitative characterization of material microstructures is essential for the performance prediction and hence the material design. At present, the quantitative characterization methods mainly rely on the microstructure characterization of shape, size, distribution, and volume fraction, which related to the mechanical properties. These traditional methods have been applied for several decades and the subjectivity of human factors induces unavoidable errors. In this paper, we try to bypass the traditional operations and identify the relationship between the microstructures and the material properties by the texture of image itself directly. The statistical approach is based on gray level Co-occurrence matrix (GLCM), allowing an objective and repeatable study on material microstructures. We first present how to identify GLCM with the optimal parameters, and then apply the method on three systems with different microstructures. The results show that GLCM can reveal the interface information and microstructures complexity with less human impact. Naturally, there is a good correlation between GLCM and the mechanical properties. (paper)

Mechanisms of microstructural changes of fuel under irradiation

International Nuclear Information System (INIS)

Garcia, P.; Carlot, G.; Dorado, B.; Maillard, S.; Sabathier, C.; Martin, G.; Oh, J.Y.; Welland, M.J.

2015-01-01

Nuclear fuels are subjected to high levels of radiation damage mainly due to the slowing of fission fragments, which results in substantial modifications of the initial fuel microstructure. Microstructure changes alter practically all engineering fuel properties such as atomic transport or thermomechanical properties so understanding these changes is essential to predicting the performance of fuel elements. Also, with increasing burn-up, the fuel drifts away from its initial composition as the fission process produces new chemical elements. Because nuclear fuels operate at high temperature and usually under high-temperature gradients, damage annealing, foreign atom or defect clustering and migration occur on multiple time and length scales, which make long-term predictions difficult. The end result is a fuel microstructure which may show extensive differences on the scale of a single fuel pellet. The main challenge we are faced with is, therefore, to identify the phenomena occurring on the atom scale that are liable to have macroscopic effects that will determine the microstructure changes and ultimately the life-span of a fuel element. One step towards meeting this challenge is to develop and apply experimental or modelling methods capable of connecting events that occur over very short length and timescales to changes in the fuel microstructure over engineering length and timescales. In the first part of this chapter, we provide an overview of some of the more important microstructure modifications observed in nuclear fuels. The emphasis is placed on oxide fuels because of the extensive amount of data available in relation to these materials under neutron or ion irradiation. When possible and relevant, the specifics of other types of fuels such as metallic or carbide fuels are alluded to. Throughout this chapter but more specifically in the latter part, we attempt to give examples of how modelling and experimentation at various scales can provide us with

Using language models to identify relevant new information in inpatient clinical notes.

Science.gov (United States)

Zhang, Rui; Pakhomov, Serguei V; Lee, Janet T; Melton, Genevieve B

2014-01-01

Redundant information in clinical notes within electronic health record (EHR) systems is ubiquitous and may negatively impact the use of these notes by clinicians, and, potentially, the efficiency of patient care delivery. Automated methods to identify redundant versus relevant new information may provide a valuable tool for clinicians to better synthesize patient information and navigate to clinically important details. In this study, we investigated the use of language models for identification of new information in inpatient notes, and evaluated our methods using expert-derived reference standards. The best method achieved precision of 0.743, recall of 0.832 and F1-measure of 0.784. The average proportion of redundant information was similar between inpatient and outpatient progress notes (76.6% (SD=17.3%) and 76.7% (SD=14.0%), respectively). Advanced practice providers tended to have higher rates of redundancy in their notes compared to physicians. Future investigation includes the addition of semantic components and visualization of new information.

Quantitative Microstructure Characterization of a NMC Electrode

Energy Technology Data Exchange (ETDEWEB)

Usseglio-Viretta, François Laurent Emilien; Smith, Kandler

2017-07-07

Performance of lithium-ion batteries (LIBs) is strongly influenced by the porous microstructure of their electrodes. In this work, 3D microstructures of calendared and un-calendared positive electrode LiNi1/3Mn1/3Co1/3O2 (NMC) have been investigated in order to extract relevant properties useful for battery modeling. Transport (volume fraction, connectivity, particle size and tortuosity) and electrochemical (specific surface area) properties have been calculated for the pore and the active material. Special attention has been paid to determine the size of the so-called representative volume element (RVE) required to be statistically representative of the heterogeneous medium. Several parameters have been calculated using a panel of different numerical methods in order to compare their results. Besides, the image level of detail has been evaluated (using original criteria based upon edge detection) to assess the overall data quality available for the study.

Quantitative Microstructure Characterization of a NMC Electrode

Energy Technology Data Exchange (ETDEWEB)

Usseglio Viretta, Francois L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Smith, Kandler A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-28

Performance of lithium-ion batteries (LIBs) is strongly influenced by the porous microstructure of their electrodes. In this work, 3D microstructures of calendared and un-calendared positive electrode LiNi1/3Mn1/3Co1/3O2 (NMC) have been investigated in order to extract relevant properties useful for battery modeling. Transport (volume fraction, connectivity, particle size and tortuosity) and electrochemical (specific surface area) properties have been calculated for the pore and the active material. Special attention has been paid to determine the size of the so-called representative volume element (RVE) required to be statistically representative of the heterogeneous medium. Several parameters have been calculated using a panel of different numerical methods in order to compare their results. Besides, the image level of detail has been evaluated (using original criteria based upon edge detection) to assess the overall data quality available for the study.

Linking attentional processes and conceptual problem solving: visual cues facilitate the automaticity of extracting relevant information from diagrams.

Science.gov (United States)

Rouinfar, Amy; Agra, Elise; Larson, Adam M; Rebello, N Sanjay; Loschky, Lester C

2014-01-01

This study investigated links between visual attention processes and conceptual problem solving. This was done by overlaying visual cues on conceptual physics problem diagrams to direct participants' attention to relevant areas to facilitate problem solving. Participants (N = 80) individually worked through four problem sets, each containing a diagram, while their eye movements were recorded. Each diagram contained regions that were relevant to solving the problem correctly and separate regions related to common incorrect responses. Problem sets contained an initial problem, six isomorphic training problems, and a transfer problem. The cued condition saw visual cues overlaid on the training problems. Participants' verbal responses were used to determine their accuracy. This study produced two major findings. First, short duration visual cues which draw attention to solution-relevant information and aid in the organizing and integrating of it, facilitate both immediate problem solving and generalization of that ability to new problems. Thus, visual cues can facilitate re-representing a problem and overcoming impasse, enabling a correct solution. Importantly, these cueing effects on problem solving did not involve the solvers' attention necessarily embodying the solution to the problem, but were instead caused by solvers attending to and integrating relevant information in the problems into a solution path. Second, this study demonstrates that when such cues are used across multiple problems, solvers can automatize the extraction of problem-relevant information extraction. These results suggest that low-level attentional selection processes provide a necessary gateway for relevant information to be used in problem solving, but are generally not sufficient for correct problem solving. Instead, factors that lead a solver to an impasse and to organize and integrate problem information also greatly facilitate arriving at correct solutions.

Microstructural changes in a cementitious membrane due to the application of a DC electric field.

Science.gov (United States)

Covelo, Alba; Diaz, Belen; Freire, Lorena; Novoa, X Ramon; Perez, M Consuelo

2008-07-01

The use of electromigration techniques to accelerate chloride ions motion is commonly employed to characterise the permeability of cementitious samples to chlorides, a relevant parameter in reinforced concrete corrosion. This paper is devoted to the study of microstructure's changes occurring in mortar samples when submitted to natural diffusion and migration experiments. The application of an electric field reduces testing time in about one order of magnitude with respect to natural diffusion experiments. Nevertheless, the final sample's microstructure differs in both tests. Impedance Spectroscopy is employed for real time monitoring of microstructural changes. During migration experiments the global impedance undergoes important increase in shorter period of time compared to natural diffusion tests. So, the forced motion of ions through the concrete membrane induces significant variations in the porous structure, as confirmed by Mercury Intrusion Porosimetry. After migration experiments, an important increase in the capillary pore size (10-100 nm) was detected. Conversely, no relevant variations are found after natural diffusion tests. Results presented in this work cast doubt on the significance of diffusion coefficient values obtained under accelerated conditions.

76 FR 44337 - Comments and Information Relevant to Mid Decade Review of NORA

Science.gov (United States)

2011-07-25

... NIOSH-244] Comments and Information Relevant to Mid Decade Review of NORA AGENCY: Department of Health...) is conducting a review of the processes of the National Occupational Research Agenda (NORA). In 2006, NORA entered its second decade with an industry sector-based structure. In 2011, as NORA reaches the...

Motivated memory: memory for attitude-relevant information as a function of self-esteem

NARCIS (Netherlands)

Wiersema, D.V.; van der Pligt, J.; van Harreveld, F.

2010-01-01

In this article we offer a new perspective on the contradictory findings in the literature on memory for attitude-relevant information. We propose that biases in memory are most likely to occur when the attitude involved is connected to personally important values and the self; i.e., if the attitude

Relevance between the degree of industrial competition and fair value information: Study on the listed companies in China

Directory of Open Access Journals (Sweden)

Xuemin Zhuang

2015-05-01

Full Text Available Purpose: The purpose of this article is to study whether there exists natural relationship between fair value and corporate external market. A series of special phenomenon in the application of fair value arouses our research interests, which present evidences on how competition affects the correlation of fair value information. Design/methodology/approach: this thesis chooses fair value changes gains and losses and calculate the ratio of DFVPSit as the alternative variable of the fair value. In order to effectively inspect the mutual influence between the degree of industry competition and the value relevance of fair value, and reduce the impact of multi-collinearity, we built a regression model on the hypothesis, which supposes that if other conditions are the same, the fair value information has greater value relevance if the degree of the industry competition is greater. To test the hypothesis, we use the comparison of the DFVPSit coefficient absolute value to judge the value relevance of fair value information, and the greater the absolute value is, the higher relevance between the changes in fair value per share profits and losses with the stock prices. Findings: The higher the degree of competition in the industry is, the more fair value information relevance is. Also, there are evidences representing that fair value information often presents negative correlation with the stock price. Originality/value: The main contribution of the article is to show that not only need we make the formulation and implementation of the high quality of fair value accounting standards to suit for both the national conditions and international practice, but also need we further to improve the company's external governance mechanism to promote fair value’s information correlation.

Microstructure and rheology of globular protein gels in the presence of gelatin

NARCIS (Netherlands)

Ersch, C.; Meinders, M/B.J.; Bouwman, W.G.; Nieuwland, M.; Linden, E. van der; Venema, P.; Martin, A.H.

2016-01-01

The microstructure and rheological response of globular protein gels (whey protein isolate (WPI) and soy protein isolate (SPI)) in the presence of gelatin (type A, type B and hydrolyzed type A) was investigated. Microstructural information was obtained using a combination of confocal laser scanning

IMPACT OF THE CONVERGENCE PROCESS TO INTERNATIONAL FINANCIAL REPORTING STANDARDS ON THE VALUE RELEVANCE OF FINANCIAL INFORMATION

Directory of Open Access Journals (Sweden)

Marcelo Alvaro da Silva Macedo

2012-11-01

Full Text Available Law 11.638/07 marked the start of a series of changes in the laws that regulate Brazilian accounting practices. The main reason for these changes is the convergence process of local with international accounting standards. As a result of Law 11.638/07, the legal precedent was established to achieve convergence. In that context, the aim of this study is to analyze the impact of the convergence process with international accounting standards on the relevance of financial information, based on data for 2007, without and with the alterations Law 11.638/07 introduced and according to the CPC Pronouncements, applicable as from 2008 onwards. Therefore, a value relevance study is used, applying regression analysis to annual stock price information (dependent variable and net profit per share (NPPS and net equity per share (NEPS as independent variables. The main results show that financial information on NPPS and NEPS for 2007, with and without the legal alterations, are relevant for the capital market. A comparison between both regressions used in the analysis, however, shows an information gain for financial information that includes the changes introduced in the first phase of the accounting convergence process with the international standards.

Creation of reliable relevance judgments in information retrieval systems evaluation experimentation through crowdsourcing: a review.

Science.gov (United States)

Samimi, Parnia; Ravana, Sri Devi

2014-01-01

Test collection is used to evaluate the information retrieval systems in laboratory-based evaluation experimentation. In a classic setting, generating relevance judgments involves human assessors and is a costly and time consuming task. Researchers and practitioners are still being challenged in performing reliable and low-cost evaluation of retrieval systems. Crowdsourcing as a novel method of data acquisition is broadly used in many research fields. It has been proven that crowdsourcing is an inexpensive and quick solution as well as a reliable alternative for creating relevance judgments. One of the crowdsourcing applications in IR is to judge relevancy of query document pair. In order to have a successful crowdsourcing experiment, the relevance judgment tasks should be designed precisely to emphasize quality control. This paper is intended to explore different factors that have an influence on the accuracy of relevance judgments accomplished by workers and how to intensify the reliability of judgments in crowdsourcing experiment.

Deep learning relevance

DEFF Research Database (Denmark)

Lioma, Christina; Larsen, Birger; Petersen, Casper

2016-01-01

train a Recurrent Neural Network (RNN) on existing relevant information to that query. We then use the RNN to "deep learn" a single, synthetic, and we assume, relevant document for that query. We design a crowdsourcing experiment to assess how relevant the "deep learned" document is, compared...... to existing relevant documents. Users are shown a query and four wordclouds (of three existing relevant documents and our deep learned synthetic document). The synthetic document is ranked on average most relevant of all....

Expert vs. novice differences in the detection of relevant information during a chess game: evidence from eye movements.

Science.gov (United States)

Sheridan, Heather; Reingold, Eyal M

2014-01-01

The present study explored the ability of expert and novice chess players to rapidly distinguish between regions of a chessboard that were relevant to the best move on the board, and regions of the board that were irrelevant. Accordingly, we monitored the eye movements of expert and novice chess players, while they selected white's best move for a variety of chess problems. To manipulate relevancy, we constructed two different versions of each chess problem in the experiment, and we counterbalanced these versions across participants. These two versions of each problem were identical except that a single piece was changed from a bishop to a knight. This subtle change reversed the relevancy map of the board, such that regions that were relevant in one version of the board were now irrelevant (and vice versa). Using this paradigm, we demonstrated that both the experts and novices spent more time fixating the relevant relative to the irrelevant regions of the board. However, the experts were faster at detecting relevant information than the novices, as shown by the finding that experts (but not novices) were able to distinguish between relevant and irrelevant information during the early part of the trial. These findings further demonstrate the domain-related perceptual processing advantage of chess experts, using an experimental paradigm that allowed us to manipulate relevancy under tightly controlled conditions.

Expert versus novice differences in the detection of relevant information during a chess game: Evidence from eye movements

Directory of Open Access Journals (Sweden)

Heather eSheridan

2014-08-01

Full Text Available The present study explored the ability of expert and novice chess players to rapidly distinguish between regions of a chessboard that were relevant to the best move on the board, and regions of the board that were irrelevant. Accordingly, we monitored the eye movements of expert and novice chess players, while they selected white’s best move for a variety of chess problems. To manipulate relevancy, we constructed two different versions of each chess problem in the experiment, and we counterbalanced these versions across participants. These two versions of each problem were identical except that a single piece was changed from a bishop to a knight. This subtle change reversed the relevancy map of the board, such that regions that were relevant in one version of the board were now irrelevant (and vice versa. Using this paradigm, we demonstrated that both the experts and novices spent more time fixating the relevant relative to the irrelevant regions of the board. However, the experts were faster at detecting relevant information than the novices, as shown by the finding that experts (but not novices were able to distinguish between relevant and irrelevant information during the early part of the trial. These findings further demonstrate the domain-related perceptual processing advantage of chess experts, using an experimental paradigm that allowed us to manipulate relevancy under tightly controlled conditions.

Ultrasound scatter in heterogeneous 3D microstructures: Parameters affecting multiple scattering

Science.gov (United States)

Engle, B. J.; Roberts, R. A.; Grandin, R. J.

2018-04-01

This paper reports on a computational study of ultrasound propagation in heterogeneous metal microstructures. Random spatial fluctuations in elastic properties over a range of length scales relative to ultrasound wavelength can give rise to scatter-induced attenuation, backscatter noise, and phase front aberration. It is of interest to quantify the dependence of these phenomena on the microstructure parameters, for the purpose of quantifying deleterious consequences on flaw detectability, and for the purpose of material characterization. Valuable tools for estimation of microstructure parameters (e.g. grain size) through analysis of ultrasound backscatter have been developed based on approximate weak-scattering models. While useful, it is understood that these tools display inherent inaccuracy when multiple scattering phenomena significantly contribute to the measurement. It is the goal of this work to supplement weak scattering model predictions with corrections derived through application of an exact computational scattering model to explicitly prescribed microstructures. The scattering problem is formulated as a volume integral equation (VIE) displaying a convolutional Green-function-derived kernel. The VIE is solved iteratively employing FFT-based con-volution. Realizations of random microstructures are specified on the micron scale using statistical property descriptions (e.g. grain size and orientation distributions), which are then spatially filtered to provide rigorously equivalent scattering media on a length scale relevant to ultrasound propagation. Scattering responses from ensembles of media representations are averaged to obtain mean and variance of quantities such as attenuation and backscatter noise levels, as a function of microstructure descriptors. The computational approach will be summarized, and examples of application will be presented.

LANGUAGE EXPERIENCE SHAPES PROCESSING OF PITCH RELEVANT INFORMATION IN THE HUMAN BRAINSTEM AND AUDITORY CORTEX: ELECTROPHYSIOLOGICAL EVIDENCE.

Science.gov (United States)

Krishnan, Ananthanarayan; Gandour, Jackson T

2014-12-01

Pitch is a robust perceptual attribute that plays an important role in speech, language, and music. As such, it provides an analytic window to evaluate how neural activity relevant to pitch undergo transformation from early sensory to later cognitive stages of processing in a well coordinated hierarchical network that is subject to experience-dependent plasticity. We review recent evidence of language experience-dependent effects in pitch processing based on comparisons of native vs. nonnative speakers of a tonal language from electrophysiological recordings in the auditory brainstem and auditory cortex. We present evidence that shows enhanced representation of linguistically-relevant pitch dimensions or features at both the brainstem and cortical levels with a stimulus-dependent preferential activation of the right hemisphere in native speakers of a tone language. We argue that neural representation of pitch-relevant information in the brainstem and early sensory level processing in the auditory cortex is shaped by the perceptual salience of domain-specific features. While both stages of processing are shaped by language experience, neural representations are transformed and fundamentally different at each biological level of abstraction. The representation of pitch relevant information in the brainstem is more fine-grained spectrotemporally as it reflects sustained neural phase-locking to pitch relevant periodicities contained in the stimulus. In contrast, the cortical pitch relevant neural activity reflects primarily a series of transient temporal neural events synchronized to certain temporal attributes of the pitch contour. We argue that experience-dependent enhancement of pitch representation for Chinese listeners most likely reflects an interaction between higher-level cognitive processes and early sensory-level processing to improve representations of behaviorally-relevant features that contribute optimally to perception. It is our view that long

Identifying relevant group of miRNAs in cancer using fuzzy mutual information.

Science.gov (United States)

Pal, Jayanta Kumar; Ray, Shubhra Sankar; Pal, Sankar K

2016-04-01

MicroRNAs (miRNAs) act as a major biomarker of cancer. All miRNAs in human body are not equally important for cancer identification. We propose a methodology, called FMIMS, which automatically selects the most relevant miRNAs for a particular type of cancer. In FMIMS, miRNAs are initially grouped by using a SVM-based algorithm; then the group with highest relevance is determined and the miRNAs in that group are finally ranked for selection according to their redundancy. Fuzzy mutual information is used in computing the relevance of a group and the redundancy of miRNAs within it. Superiority of the most relevant group to all others, in deciding normal or cancer, is demonstrated on breast, renal, colorectal, lung, melanoma and prostate data. The merit of FMIMS as compared to several existing methods is established. While 12 out of 15 selected miRNAs by FMIMS corroborate with those of biological investigations, three of them viz., "hsa-miR-519," "hsa-miR-431" and "hsa-miR-320c" are possible novel predictions for renal cancer, lung cancer and melanoma, respectively. The selected miRNAs are found to be involved in disease-specific pathways by targeting various genes. The method is also able to detect the responsible miRNAs even at the primary stage of cancer. The related code is available at http://www.jayanta.droppages.com/FMIMS.html .

Autism Spectrum Disorder Updates - Relevant Information for Early Interventionists to Consider.

Science.gov (United States)

Allen-Meares, Paula; MacDonald, Megan; McGee, Kristin

2016-01-01

Autism spectrum disorder (ASD) is a pervasive developmental disorder characterized by deficits in social communication skills as well as repetitive, restricted or stereotyped behaviors (1). Early interventionists are often found at the forefront of assessment, evaluation, and early intervention services for children with ASD. The role of an early intervention specialist may include assessing developmental history, providing group and individual counseling, working in partnership with families on home, school, and community environments, mobilizing school and community resources, and assisting in the development of positive early intervention strategies (2, 3). The commonality among these roles resides in the importance of providing up-to-date, relevant information to families and children. The purpose of this review is to provide pertinent up-to-date knowledge for early interventionists to help inform practice in working with individuals with ASD, including common behavioral models of intervention.

Characterization of the microstructure in Mg based alloy

KAUST Repository

Kutbee, Arwa T

2013-06-01

The cast products Mg–Sn based alloys are promising candidates for automobile industries, since they provide a cheap yet thermally stable alternative to existing alloys. One drawback of the Mg–Sn based alloys is their insufficient hardness. The hardenability can be improved by engineering the microstructure through additions of Zn to the base alloy and selective aging conditions. Therefore, detailed knowledge about the microstructural characteristics and the role of Zn to promote precipitation hardening is essential for age hardenable Mg-based alloys. In this work, microstructural investigation of the Mg–1.4Sn–1.3Zn–0.1Mn (at.%) precipitation system was performed using TEM. The chemical composition of the precipitates was analyzed using EDS. APT was employed to obtain precise chemical information on the distribution of Zn in the microstructure. It was found from microstructural studies that different precipitates with varying sizes and phases were present; lath-shaped precipitates of the Mg2Sn phase have an incoherent interface with the matrix, unlike the lath-shaped MgZn2 precipitates. Furthermore, nano-sized precipitates dispersed in the microstructure with short-lath morphology can either be enriched with Sn or Zn. On the other hand, APT analysis revealed the strong repulsion between Sn and Zn atoms in a portion of the analysis volume. However, larger reconstruction volume required to identify the role of Zn is still limited to the optimization of specimen preparation.

Subgenual Cingulum Microstructure Supports Control of Emotional Conflict

Science.gov (United States)

Keedwell, Paul A.; Doidge, Amie N.; Meyer, Marcel; Lawrence, Natalia; Lawrence, Andrew D.; Jones, Derek K.

2016-01-01

Major depressive disorder (MDD) is associated with specific difficulties in attentional disengagement from negatively valenced material. Diffusion MRI studies have demonstrated altered white matter microstructure in the subgenual cingulum bundle (CB) in individuals with MDD, though the functional significance of these alterations has not been examined formally. This study explored whether individual differences in selective attention to negatively valenced stimuli are related to interindividual differences in subgenual CB microstructure. Forty-six individuals (21 with remitted MDD, 25 never depressed) completed an emotional Stroop task, using happy and angry distractor faces overlaid by pleasant or unpleasant target words and a control gender-based Stroop task. CBs were reconstructed in 38 individuals using diffusion-weighted imaging and tractography, and mean fractional anisotropy (FA) computed for the subgenual, retrosplenial, and parahippocampal subdivisions. No significant correlations were found between FA and performance in the control gender-based Stroop task in any CB region. However, the degree of interference produced by angry face distractors on time to identify pleasant words (emotional conflict) correlated selectively with FA in the subgenual CB (r = −0.53; P = 0.01). Higher FA was associated with reduced interference, irrespective of a diagnosis of MDD, suggesting that subgenual CB microstructure is functionally relevant for regulating attentional bias toward negative interpersonal stimuli. PMID:27048427

Microstructural characterization of pipe bomb fragments

International Nuclear Information System (INIS)

Gregory, Otto; Oxley, Jimmie; Smith, James; Platek, Michael; Ghonem, Hamouda; Bernier, Evan; Downey, Markus; Cumminskey, Christopher

2010-01-01

Recovered pipe bomb fragments, exploded under controlled conditions, have been characterized using scanning electron microscopy, optical microscopy and microhardness. Specifically, this paper examines the microstructural changes in plain carbon-steel fragments collected after the controlled explosion of galvanized, schedule 40, continuously welded, steel pipes filled with various smokeless powders. A number of microstructural changes were observed in the recovered pipe fragments: deformation of the soft alpha-ferrite grains, deformation of pearlite colonies, twin formation, bands of distorted pearlite colonies, slip bands, and cross-slip bands. These microstructural changes were correlated with the relative energy of the smokeless powder fillers. The energy of the smokeless powder was reflected in a reduction in thickness of the pipe fragments (due to plastic strain prior to fracture) and an increase in microhardness. Moreover, within fragments from a single pipe, there was a radial variation in microhardness, with the microhardness at the outer wall being greater than that at the inner wall. These findings were consistent with the premise that, with the high energy fillers, extensive plastic deformation and wall thinning occurred prior to pipe fracture. Ultimately, the information collected from this investigation will be used to develop a database, where the fragment microstructure and microhardness will be correlated with type of explosive filler and bomb design. Some analyses, specifically wall thinning and microhardness, may aid in field characterization of explosive devices.

Microstructure evolution and microstructure/mechanical properties relationships in alpha+beta titanium alloys

Science.gov (United States)

Lee, Eunha

In this study, the microstructural evolution of Timetal 550 was investigated. Timetal 550 showed two types of phase transformations (martensitic and nucleation and growth) depending on the cooling rate from the beta region. The alpha phase initially precipitated at the prior beta grain boundaries, and it had a Burgers OR with one of the adjacent grains. It was found that colonies could grow, even in the fast-cooled Timetal 550 sample, from the grain boundary alpha into the prior beta grain with which it exhibited the Burgers OR. Three orientation relationships were also found between alpha laths in the basketweave microstructure. Microhardness testing demonstrated that fast-cooled Timetal 550 samples with basketweave microstructure were harder than slowly-cooled samples with colony microstructure. Orientation-dependent deformation was found in the colony microstructure. Specifically, when the surface normal is perpendicular to the [0001] of alpha, the material deforms easily in the direction perpendicular to the [0001] of alpha. Fuzzy logic and Bayesian neural network models were developed to predict the room temperature tensile properties of Timetal 550. This involved the development of a database relating microstructural features to mechanical properties. A Gleeble 3800 thermal-mechanical simulator was used to develop various microstructures. Microstructural features of tensile-tested samples were quantified using stereological procedures. The quantified microstructural features and the tensile properties were used as inputs and outputs, respectively, for modeling the relationships between them. The individual influence of five microstructural features on tensile properties was determined using the established models. The microstructural features having the greatest impact on UTS and YS were the thickness of alpha laths and the width of grain boundary alpha layer, and the microstructural features having the greatest impact on elongation were the thickness of

Human capital information in management reports: An analysis of compliance with the characteristic of the relevance of disclosure

Directory of Open Access Journals (Sweden)

Ainhoa Saitua

2015-06-01

Full Text Available Purpose: The aim of this paper is to assess the compliance with the characteristic of the relevance of disclosure in Management Reports, particularly dealing with Human Capital (HC information.Design/methodology/approach: We codify all instances where narratives of IBEX-35 stock index companies over a five year period in Spain comply with the recommendations for a “high quality” Management Commentary (MC in terms of the relevance characteristic of the information disclosed (IASB, 2005.Findings: The analysis results show that a greater quantity of information about HC in terms of the number of pages devoted is not always indicative of higher quality in terms of relevance if we look for the application of IASB recommendations.Research limitations/implications: Further research could assess compliance with other qualitative characteristics required by other standards or guidances that were internationaly generaly accepted.Practical implications: Among the areas that require improvement in HC disclosures we highlight forward-looking information.Social implications: We propose that an internationally accepted agreement must be struck to unite all the efforts that are being made to improve narrative information in the MC section, and specifically with reference to HC.Originality/value: This work compiles the HC disclosures identified as best practices that may serve as a reference to other companies.

Assessment of efficiency of functioning the infocommunication systems a special purpose in the conditions of violation quality of relevance information

Science.gov (United States)

Parinov, A. V.; Korotkikh, L. P.; Desyatov, D. B.; Stepanov, L. V.

2018-03-01

The uniqueness of information processing mechanisms in special-purpose infocommunication systems and the increased interest of intruders lead to an increase in the relevance of the problems associated with their protection. The paper considers the issues of building risk-models for the violation of the relevance and value of information in infocommunication systems for special purposes. Also, special attention is paid to the connection between the qualities of relevance and the value of information obtained as a result of the operation of infocommunication systems for special purposes. Analytical expressions for the risk and damage function in the time range in special-purpose infocommunication systems are obtained, which can serve as a mathematical basis for risk assessment. Further, an analytical expression is obtained to assess the chance of obtaining up-to-date information in the operation of infocommunication systems up to the time the information quality is violated. An analytical expression for estimating the chance can be used to calculate the effectiveness of a special-purpose infocommunication system.

Robust and fast nonlinear optimization of diffusion MRI microstructure models.

Science.gov (United States)

Harms, R L; Fritz, F J; Tobisch, A; Goebel, R; Roebroeck, A

2017-07-15

run time, fit, accuracy and precision. Parameter initialization approaches were found to be relevant especially for more complex models, such as those involving several fiber orientations per voxel. For these, a fitting cascade initializing or fixing parameter values in a later optimization step from simpler models in an earlier optimization step further improved run time, fit, accuracy and precision compared to a single step fit. This establishes and makes available standards by which robust fit and accuracy can be achieved in shorter run times. This is especially relevant for the use of diffusion microstructure modeling in large group or population studies and in combining microstructure parameter maps with tractography results. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Microstructural Changes within the Basal Ganglia Differ between Parkinson Disease Subtypes.

Science.gov (United States)

Nagae, Lidia M; Honce, Justin M; Tanabe, Jody; Shelton, Erika; Sillau, Stefan H; Berman, Brian D

2016-01-01

Diffusion tensor imaging (DTI) of the substantia nigra has shown promise in detecting and quantifying neurodegeneration in Parkinson disease (PD). It remains unknown, however, whether differences in microstructural changes within the basal ganglia underlie PD motor subtypes. We investigated microstructural changes within the basal ganglia of mild to moderately affected PD patients using DTI and sought to determine if microstructural changes differ between the tremor dominant (TD) and postural instability/gait difficulty (PIGD) subtypes. Fractional anisotropy, mean diffusivity, radial, and axial diffusivity were obtained from bilateral caudate, putamen, globus pallidus, and substantia nigra of 21 PD patients (12 TD and 9 PIGD) and 20 age-matched healthy controls. T-tests and ANOVA methods were used to compare PD patients, subtypes, and controls, and Spearman correlations tested for relationships between DTI and clinical measures. We found our cohort of PD patients had reduced fractional anisotropy within the substantia nigra and increased mean and radial diffusivity within the substantia nigra and globus pallidus compared to controls, and that changes within those structures were largely driven by the PIGD subtype. Across all PD patients fractional anisotropy within the substantia nigra correlated with disease stage, while in PIGD patients increased diffusivity within the globus pallidus correlated with disease stage and motor severity. We conclude that PIGD patients have more severely affected microstructural changes within the substantia nigra compared to TD, and that microstructural changes within the globus pallidus may be particularly relevant for the manifestation of the PIGD subtype.

MicroTrack: an algorithm for concurrent projectome and microstructure estimation.

Science.gov (United States)

Sherbondy, Anthony J; Rowe, Matthew C; Alexander, Daniel C

2010-01-01

This paper presents MicroTrack, an algorithm that combines global tractography and direct microstructure estimation using diffusion-weighted imaging data. Previous work recovers connectivity via tractography independently from estimating microstructure features, such as axon diameter distribution and density. However, the two estimates have great potential to inform one another given the common assumption that microstructural features remain consistent along fibers. Here we provide a preliminary examination of this hypothesis. We adapt a global tractography algorithm to associate axon diameter with each putative pathway and optimize both the set of pathways and their microstructural parameters to find the best fit of this holistic white-matter model to the MRI data. We demonstrate in simulation that, with a multi-shell HARDI acquisition, this approach not only improves estimates of microstructural parameters over voxel-by-voxel estimation, but provides a solution to long standing problems in tractography. In particular, a simple experiment demonstrates the resolution of the well known ambiguity between crossing and kissing fibers. The results strongly motivate further development of this kind of algorithm for brain connectivity mapping.

Effect of the Microstructure of the Functional Layers on the Efficiency of Perovskite Solar Cells.

Science.gov (United States)

Huang, Fuzhi; Pascoe, Alexander R; Wu, Wu-Qiang; Ku, Zhiliang; Peng, Yong; Zhong, Jie; Caruso, Rachel A; Cheng, Yi-Bing

2017-05-01

The efficiencies of the hybrid organic-inorganic perovskite solar cells have been rapidly approaching the benchmarks held by the leading thin-film photovoltaic technologies. Arguably, one of the most important factors leading to this rapid advancement is the ability to manipulate the microstructure of the perovskite layer and the adjacent functional layers within the device. Here, an analysis of the nucleation and growth models relevant to the formation of perovskite films is provided, along with the effect of the perovskite microstructure (grain sizes and voids) on device performance. In addition, the effect of a compact or mesoporous electron-transport-layer (ETL) microstructure on the perovskite film formation and the optical/photoelectric properties at the ETL/perovskite interface are overviewed. Insight into the formation of the functional layers within a perovskite solar cell is provided, and potential avenues for further development of the perovskite microstructure are identified. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microstructural evolution and thermophysical property evaluation of Th-U alloys

International Nuclear Information System (INIS)

Das, Santanu; Kaity, Santu; Bannerjee, Joydipto; Kumar, Raj; Roy, S.B.; Chaudhari, G.P.; Daniel, B.S.S.

2015-01-01

Thorium-uranium alloy fuel has not received much research attention mainly because of easy availability of uranium and military incentive offered by U-Pu cycle. Moreover, (i) lack of a consistent systematic effort to develop the alloys and define the limitations of these fuels, (ii) dearth of initiatives to define its microstructures that can result from composition and fabrication variables are prime reasons for this system not having witnessed much developmental research endeavour. Hence, it seems prudent to explore few compositions selected from thorium-uranium phase diagram keeping two primary objectives in view viz. (i) establishing its microstructural features and to study the variations in those, if any, brought about by processing variables etc. and (ii) to assess few thermal properties relevant to fuel applications. This experimental work aims at addressing gap in research on thorium-uranium alloys. Selected compositions of thorium-uranium alloy have been taken for microstructural study and evaluation of thermophysical properties. Based on the microstructural features and thermophysical property evaluation it is seen that high thorium Th-U alloys have appreciable thermal conductivity and low thermal expansion coefficient. It can reasonably be concluded that high thorium Th-U alloy can be used for possible nuclear fuel application in reactors provided other factors (e.g. reactor physics, post irradiation examinations etc.) are also seen to be favourable. (author)

Analysis of electrical and microstructural characteristics of a ZnO-based varistor doped with rare earth oxide

International Nuclear Information System (INIS)

Andrade, J.M. de; Dias, R.; Furtado, J.G. de M.; Assuncao, F.C.R.

2010-01-01

Varistor is a semiconductor device, used in the protection of electrical systems, characterized to have a high no-linear electric resistance. Its properties are directly dependents of its chemical composition and microstructural characteristics. In this work were analyzed microstructural and electrical characteristics of a ZnO-based varistor doped with rare earth oxide, with chemical composition (mol%) 98,5.ZnO - 0,3.Pr 6 O 11 - 0,2.Dy 2 O 3 - 0,9.Co 2 O 3 - 0,1.Cr 2 O 3 . X-ray diffraction for phase characterization, scanning electron microscopy and energy dispersive X-ray spectroscopy were used for microstructural analysis. Measurement of average grain size and electrical and dielectric characteristics complete the characterization. The results show the formation of biphasic microstructure and with high densification, presenting relevant varistors characteristics but that would need improvements.(author)

Stimulus-response correspondence effect as a function of temporal overlap between relevant and irrelevant information processing.

Science.gov (United States)

Wang, Dong-Yuan Debbie; Richard, F Dan; Ray, Brittany

2016-01-01

The stimulus-response correspondence (SRC) effect refers to advantages in performance when stimulus and response correspond in dimensions or features, even if the common features are irrelevant to the task. Previous research indicated that the SRC effect depends on the temporal course of stimulus information processing. The current study investigated how the temporal overlap between relevant and irrelevant stimulus processing influences the SRC effect. In this experiment, the irrelevant stimulus (a previously associated tone) preceded the relevant stimulus (a coloured rectangle). The irrelevant and relevant stimuli onset asynchrony was varied to manipulate the temporal overlap between the irrelevant and relevant stimuli processing. Results indicated that the SRC effect size varied as a quadratic function of the temporal overlap between the relevant stimulus and irrelevant stimulus. This finding extends previous experimental observations that the SRC effect size varies in an increasing or decreasing function with reaction time. The current study demonstrated a quadratic function between effect size and the temporal overlap.

Microstructured reactor for electroorganic synthesis

Energy Technology Data Exchange (ETDEWEB)

Bouzek, Karel, E-mail: bouzekk@vscht.c [Department of Inorganic Technology, Institute of Chemical Technology Prague, Technicka 5, 166 28 Prague 6 (Czech Republic); Jiricny, Vladimir [Institute of Chemical Process Fundamentals, v.v.i., Academy of Sciences of the Czech Republic, Rozvojova 2, 165 02 Prague 6 (Czech Republic); Kodym, Roman [Department of Inorganic Technology, Institute of Chemical Technology Prague, Technicka 5, 166 28 Prague 6 (Czech Republic); Kristal, Jiri [Institute of Chemical Process Fundamentals, v.v.i., Academy of Sciences of the Czech Republic, Rozvojova 2, 165 02 Prague 6 (Czech Republic); Bystron, Tomas [Department of Inorganic Technology, Institute of Chemical Technology Prague, Technicka 5, 166 28 Prague 6 (Czech Republic)

2010-11-30

In the present work a brief overview of microstructured devices, the advantages and disadvantages as well as the principles of a multiscale design approach are presented. The advantages mainly comprise uniform current density distribution, local control of the process parameters, high single-pass conversion of the reactant and reduced concentration of the supporting electrolyte needed to perform the reaction. The main challenge with this type of cell is gas evolution, a typical reaction taking place at the counter-electrode. The phenomena discussed are documented using the example of anodic methoxylation of 4-methylanisole. An analysis was made of the two-phase flow hydrodynamics inside the microstructured cell. The range of operational conditions suitable for the desired reaction was identified. The results were used together with the information on the electrode reaction kinetics in the form of the Butler-Volmer-type equation for the design of a suitable bipolar microstructured cell. A bipolar cell optimized to perform the desired reaction is reported. The results are compared with the published data. An analysis was performed that proved that the performance of the existing technology is more demanding in terms of energy consumption for the separation of the final product from the reaction mixture. The process intensification was evaluated on the basis of the available data.

Microstructure of depleted uranium under uniaxial strain conditions

International Nuclear Information System (INIS)

Zurek, A.K.; Embury, J.D.; Kelly, A.; Thissell, W.R.; Gustavsen, R.L.; Vorthman, J.E.; Hixson, R.H.

1997-01-01

Uranium samples of two different purities were used for spall strength measurements. Samples of depleted uranium were taken from very high purity material (38 ppM carbon) and from material containing 280 ppM C. Experimental conditions were chosen to effectively arrest the microstructural damage at two places in the development to full spall separation. Samples were soft recovered and characterized with respect to the microstructure and the form of damage. This allowed determination of the dependence of spall mechanisms on stress level, stress state, and sample purity. This information is used in developing a model to predict the mode of fracture

Connectivity Measures in EEG Microstructural Sleep Elements.

Science.gov (United States)

Sakellariou, Dimitris; Koupparis, Andreas M; Kokkinos, Vasileios; Koutroumanidis, Michalis; Kostopoulos, George K

2016-01-01

During Non-Rapid Eye Movement sleep (NREM) the brain is relatively disconnected from the environment, while connectedness between brain areas is also decreased. Evidence indicates, that these dynamic connectivity changes are delivered by microstructural elements of sleep: short periods of environmental stimuli evaluation followed by sleep promoting procedures. The connectivity patterns of the latter, among other aspects of sleep microstructure, are still to be fully elucidated. We suggest here a methodology for the assessment and investigation of the connectivity patterns of EEG microstructural elements, such as sleep spindles. The methodology combines techniques in the preprocessing, estimation, error assessing and visualization of results levels in order to allow the detailed examination of the connectivity aspects (levels and directionality of information flow) over frequency and time with notable resolution, while dealing with the volume conduction and EEG reference assessment. The high temporal and frequency resolution of the methodology will allow the association between the microelements and the dynamically forming networks that characterize them, and consequently possibly reveal aspects of the EEG microstructure. The proposed methodology is initially tested on artificially generated signals for proof of concept and subsequently applied to real EEG recordings via a custom built MATLAB-based tool developed for such studies. Preliminary results from 843 fast sleep spindles recorded in whole night sleep of 5 healthy volunteers indicate a prevailing pattern of interactions between centroparietal and frontal regions. We demonstrate hereby, an opening to our knowledge attempt to estimate the scalp EEG connectivity that characterizes fast sleep spindles via an "EEG-element connectivity" methodology we propose. The application of the latter, via a computational tool we developed suggests it is able to investigate the connectivity patterns related to the occurrence

Aircraft noise: effects on macro- and microstructure of sleep.

Science.gov (United States)

Basner, Mathias; Glatz, Christian; Griefahn, Barbara; Penzel, Thomas; Samel, Alexander

2008-05-01

The effects of aircraft noise on sleep macrostructure (Rechtschaffen and Kales) and microstructure (American Sleep Disorders Association [ASDA] arousal criteria) were investigated. For each of 10 subjects (mean age 35.3 years, 5 males), a baseline night without aircraft noise (control), and two nights with exposure to 64 noise events with a maximum sound pressure level (SPL) of either 45 or 65 dBA were chosen. Spontaneous and noise-induced alterations during sleep classified as arousals (ARS), changes to lighter sleep stages (CSS), awakenings including changes to sleep stage 1 (AS1), and awakenings (AWR) were analyzed. The number of events per night increased in the order AWR, AS1, CSS, and ARS under control conditions as well as under the two noise conditions. Furthermore, probabilities for sleep disruptions increased with increasing noise level. ARS were observed about fourfold compared to AWR, irrespective of control or noise condition. Under the conditions investigated, different sleep parameters show different sensitivities, but also different specificities for noise-induced sleep disturbances. We conclude that most information on sleep disturbances can be achieved by investigating robust classic parameters like AWR or AS1, although ASDA electroencephalographic (EEG) arousals might add relevant information in situations with low maximum SPLs, chronic sleep deprivation or chronic exposure.

Associations between presence of relevant information in referrals to radiology and prevalence rates in patients with suspected pulmonary embolism.

Science.gov (United States)

Hedner, Charlotta; Sundgren, Pia C; Kelly, Aine Marie

2013-09-01

The purpose of this study was to assess if the presence of information including the pretest probability (Wells score), other known risk factors, and symptoms given on referrals for computed tomography (CT) pulmonary angiography correlated with prevalence rates for pulmonary embolism (PE). Also, to evaluate for differences between a university and a regional hospital setting regarding patient characteristics, amount of relevant information provided on referrals, and prevalence rates for pulmonary embolism. Retrospective review of all consecutive referrals (emergency room, inpatient, and outpatient) for CT performed on children and adults for suspected PE from two sites: a tertiary (university) hospital (site 1) and a secondary (regional) hospital (site 2) over a 5-year period. The overall prevalence rate was 510/3641 or 14% of all referrals. Significantly higher number of males had a positive CT compared to women (18% versus 12%, P relevant information on the referral and the probability for positive finding existed, a slight trend was noted (P = .09). In two categories, "hypoxia" and "signs of deep vein thrombosis," the presence of this information conferred a higher probability for pulmonary embolism, P information conferred a higher probability for pulmonary embolism. The amount of relevant clinical information on the request did not correlate with prevalence rates, which may reflect a lack of documentation on the part of emergency physicians who may use a "gestalt" approach. Request forms likely did not capture all relevant patient risks and many factors may interact with each other, both positively and negatively. Pretest probability estimations were rarely performed, despite their inclusion in major society guidelines. Copyright © 2013 AUR. Published by Elsevier Inc. All rights reserved.

SEM Characterization of the High Burn-up Microstructure of U-7Mo Alloy

Energy Technology Data Exchange (ETDEWEB)

Dennis D. Keiser, Jr.; Jan-Fong Jue; Jian Gan; Brandon Miller; Adam Robinson; Pavel Medvedev; James Madden; Dan Wachs; M. Teague

2014-04-01

During irradiation, the microstructure of U-7Mo evolves until at a fission density near 5x1021 f/cm3 a high-burnup microstructure exists that is very different than what was observed at lower fission densities. This microstructure is dominated by randomly distributed, relatively large, homogeneous fission gas bubbles. The bubble superlattice has collapsed in many microstructural regions, and the fuel grain sizes, in many areas, become sub-micron in diameter with both amorphous fuel and crystalline fuel present. Solid fission product precipitates can be found inside the fission gas bubbles. To generate more information about the characteristics of the high-fission density microstructure, three samples irradiated in the RERTR-7 experiment have been characterized using a scanning electron microscope equipped with a focused ion beam. The FIB was used to generate samples for SEM imaging and to perform 3D reconstruction of the microstructure, which can be used to look for evidence of possible fission gas bubble interlinkage.

Microstructure of steel X 20 Cr 13 in the electron microscopical picture

International Nuclear Information System (INIS)

Gesatzke, W.

1982-01-01

The tempered microstructure of the steel X 20 Cr 13 is described by an electron microscopical overall picture and additional information is gained which would not be possible with the optical microscope. The large transmission area permits one to quantitatively evaluate a microstructure component which due to its small size can only be measured with electron microscope pictures. (orig.) [de

Microstructural evaluation of a varistor block utilized in high voltage surge arresters; Avaliacao microestrutural de um bloco varistor utilizado em para-raios de alta tensao

Energy Technology Data Exchange (ETDEWEB)

Andrade, J.M. de; Dias, R.; Furtado, J.G. de M., E-mail: jma_ime@yahoo.com.b [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Assuncao, F.C.R. [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil)

2010-07-01

Varistor is a semiconductor ceramic device characterized to have a high non-linear electrical resistance, it is used as active element of surge arresters with purpose of protecting of electro-electronics systems. Its properties are directly dependents of chemical composition and microstructural characteristics, such as grain size, porosity, twins and phases distribution. This work has the objective to characterize microstructurally a commercial varistor block of ZnO used in high voltage surge arrest and from this characterization to infer aspects about of its electrical macroscopic performance. DRX and SEM-EDS were used for microstructural analysis. The microstructural evaluation allows pointing the critical points of microstructure and, suggest relevant aspects to the improvement of commercial varistor microstructure, optimizing the electrothermal behavior of the device. (author)

Age and self-relevance effects on information search during decision making.

Science.gov (United States)

Hess, Thomas M; Queen, Tara L; Ennis, Gilda E

2013-09-01

We investigated how information search strategies used to support decision making were influenced by self-related implications of the task to the individual. Consistent with the notion of selective engagement, we hypothesized that increased self-relevance would result in more adaptive search behaviors and that this effect would be stronger in older adults than in younger adults. We examined search behaviors in 79 younger and 81 older adults using a process-tracing procedure with 2 different decision tasks. The impact of motivation (i.e., self-related task implications) was examined by manipulating social accountability and the age-related relevance of the task. Although age differences in search strategies were not great, older adults were more likely than younger adults to use simpler strategies in contexts with minimal self-implications. Contrary to expectations, young and old alike were more likely to use noncompensatory than compensatory strategies, even when engaged in systematic search, with education being the most important determinant of search behavior. The results support the notion that older adults are adaptive decision makers and that factors other than age may be more important determinants of performance in situations where knowledge can be used to support performance.

Subgenual Cingulum Microstructure Supports Control of Emotional Conflict.

Science.gov (United States)

Keedwell, Paul A; Doidge, Amie N; Meyer, Marcel; Lawrence, Natalia; Lawrence, Andrew D; Jones, Derek K

2016-06-01

Major depressive disorder (MDD) is associated with specific difficulties in attentional disengagement from negatively valenced material. Diffusion MRI studies have demonstrated altered white matter microstructure in the subgenual cingulum bundle (CB) in individuals with MDD, though the functional significance of these alterations has not been examined formally. This study explored whether individual differences in selective attention to negatively valenced stimuli are related to interindividual differences in subgenual CB microstructure. Forty-six individuals (21 with remitted MDD, 25 never depressed) completed an emotional Stroop task, using happy and angry distractor faces overlaid by pleasant or unpleasant target words and a control gender-based Stroop task. CBs were reconstructed in 38 individuals using diffusion-weighted imaging and tractography, and mean fractional anisotropy (FA) computed for the subgenual, retrosplenial, and parahippocampal subdivisions. No significant correlations were found between FA and performance in the control gender-based Stroop task in any CB region. However, the degree of interference produced by angry face distractors on time to identify pleasant words (emotional conflict) correlated selectively with FA in the subgenual CB (r = -0.53; P = 0.01). Higher FA was associated with reduced interference, irrespective of a diagnosis of MDD, suggesting that subgenual CB microstructure is functionally relevant for regulating attentional bias toward negative interpersonal stimuli. © The Author 2016. Published by Oxford University Press.

The Microstructure of Isichazamazwi SesiNdebele

Directory of Open Access Journals (Sweden)

Mandlenkosi Maphosa

2011-10-01

Full Text Available Abstract: This article analyses the microstructure of Isichazamazwi SesiNdebele. The analysis takes place on two levels: the level of availability of information and the level of accessibility of the available information to dictionary users. Data derived from two outreach exercises carried out to ascertain users' perspectives on the dictionary and their competence in using the dictionary is also scrutinised while the notion of user-friendliness and the general principles of dictionary-making form the framework within which the analysis is done.

Investigation of porous asphalt microstructure using optical and electron microscopy.

Science.gov (United States)

Poulikakos, L D; Partl, M N

2010-11-01

Direct observations of porous asphalt concrete samples in their natural state using optical and electron microscopy techniques led to useful information regarding the microstructure of two mixes and indicated a relationship between microstructure and in situ performance. This paper presents evidence that suboptimal microstructure can lead to premature failure thus making a first step in defining well or suboptimal performing pavements with a bottom-up approach (microstructure). Laboratory and field compaction produce different samples in terms of the microstructure. Laboratory compaction using the gyratory method has produced more microcracks in mineral aggregates after the binder had cooled. Well-performing mixes used polymer-modified binders, had a more homogeneous void structure with fewer elongated voids and better interlocking of the aggregates. Furthermore, well-performing mixes showed better distribution of the mastic and better coverage of the aggregates with bitumen. Low vacuum scanning electron microscopy showed that styrene butadiene styrene polymer modification in binder exists in the form of discontinuous globules and not continuous networks. A reduction in the polymer phase was observed as a result of aging and in-service use. © 2010 The Authors Journal compilation © 2010 The Royal Microscopical Society.

Microstructural aspects of fatigue failure of two-phase titanium alloys

International Nuclear Information System (INIS)

Filip, R.; Sieniawski, J.

1995-01-01

Investigations conducted in this work were aimed at obtaining information on the influence of the microstructure of the two-phase titanium alloys on fatigue strength. A course of fatigue failure depends on both dispersion and a number of secondary α-phase particles. The lamellar structure is formed during controlled cooling from the temperature range of β-phase stability. The cooling rate influences the geometrical parameters of the microstructure and finally the fatigue strength of the alloy. (author). 20 refs, 12 figs, 2 tabs

CellBase, a comprehensive collection of RESTful web services for retrieving relevant biological information from heterogeneous sources.

Science.gov (United States)

Bleda, Marta; Tarraga, Joaquin; de Maria, Alejandro; Salavert, Francisco; Garcia-Alonso, Luz; Celma, Matilde; Martin, Ainoha; Dopazo, Joaquin; Medina, Ignacio

2012-07-01

During the past years, the advances in high-throughput technologies have produced an unprecedented growth in the number and size of repositories and databases storing relevant biological data. Today, there is more biological information than ever but, unfortunately, the current status of many of these repositories is far from being optimal. Some of the most common problems are that the information is spread out in many small databases; frequently there are different standards among repositories and some databases are no longer supported or they contain too specific and unconnected information. In addition, data size is increasingly becoming an obstacle when accessing or storing biological data. All these issues make very difficult to extract and integrate information from different sources, to analyze experiments or to access and query this information in a programmatic way. CellBase provides a solution to the growing necessity of integration by easing the access to biological data. CellBase implements a set of RESTful web services that query a centralized database containing the most relevant biological data sources. The database is hosted in our servers and is regularly updated. CellBase documentation can be found at http://docs.bioinfo.cipf.es/projects/cellbase.

Effects of self-schema elaboration on affective and cognitive reactions to self-relevant information.

Science.gov (United States)

Petersen, L E; Stahlberg, D; Dauenheimer, D

2000-02-01

The basic assumption of the integrative self-schema model (ISSM; L.-E. Petersen, 1994; L.-E. Petersen, D. Stahlberg, & D. Dauenheimer, 1996; D. Stahlberg, L.-E. Petersen, & D. Dauenheimer, 1994, 1999) is that self-schema elaboration (schematic vs. aschematic) affects reactions to self-relevant information. This assumption is based on the idea that schematic dimensions occupy a more central position in the cognitive system than aschematic dimensions. In the first study, this basic prediction could be clearly confirmed: The results showed that schematic dimensions possessed stronger cognitive associations with other self-relevant cognitions as well as a higher resistance to change than aschematic dimensions did. In the second study, the main assumptions of the ISSM concerning the affective and cognitive reactions to self-relevant feedback were tested: The ISSM proposes that, on schematic dimensions, reactions to self-relevant feedback will most likely follow principles of self-consistency theory, whereas on aschematic dimensions positive feedback should elicit the most positive reactions that self-enhancement theory would predict. The experimental results clearly confirmed the hypotheses derived from the ISSM for affective reactions. Cognitive reactions, however, were in line with self-consistency principles and were not modified by the elaboration of the self-schema dimension involved.

Modeling Microstructural Evolution During Dynamic Recrystallization of Alloy D9 Using Artificial Neural Network

Science.gov (United States)

Mandal, Sumantra; Sivaprasad, P. V.; Dube, R. K.

2007-12-01

An artificial neural network (ANN) model was developed to predict the microstructural evolution of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel (Alloy D9) during dynamic recrystallization (DRX). The input parameters were strain, strain rate, and temperature whereas microstructural features namely, %DRX and average grain size were the output parameters. The ANN was trained with the database obtained from various industrial scale metal-forming operations like forge hammer, hydraulic press, and rolling carried out in the temperature range 1173-1473 K to various strain levels. The performance of the model was evaluated using a wide variety of statistical indices and the predictability of the model was found to be good. The combined influence of temperature and strain on microstructural features has been simulated employing the developed model. The results were found to be consistent with the relevant fundamental metallurgical phenomena.

INFO ANAV, a channel that is consolidated in the communication of information relevant to plant safety

International Nuclear Information System (INIS)

Lopera Broto, A. J.; Balbas Gomez, S.

2012-01-01

This weekly publication intended to make it to all the people who work at the sites of Asco and Vandellos relevant information for security since we are all responsible for the safe and reliable operation of our plants.

Microstructural control of thin-film diffusion-brazed titanium

International Nuclear Information System (INIS)

Wells, R.R.

1976-01-01

This study was designed to determine what parameters should be controlled to achieve quality joints of good toughness and high strength in titanium alloys. Emphasis was placed upon studying those parameters which provided tough joints compatible with the titanium base metal being joined. This paper is concerned with thin-film diffusion brazing based upon the eutectic system formed between copper and titanium. In order to control the joint microstructure, the copper diffusion rates and the beta-phase decomposition kinetics were studied. This information was used to produce various types of microstructures in test specimens. These were then evaluated to select the best microstructures for toughness and strength which were compatible with the titanium alloys. Results show that it is possible to accurately control properties of joints produced by thin-film diffusion brazing. This is done by controlling the initial copper content and the time-temperature parameters used in processing. Alloys studied were Ti--8Al--1Mo--1V and Ti--6Al--4V

Role of Microstructure on the Performance of UHTC's

Science.gov (United States)

Johnson, Sylvia M.; Gasch, Matthew J.; Stackpoole, Mairead; Gusman, Mike; Thornton, Jeremy

2009-01-01

UHTCs, because of their refractory nature and high thermal conductivity, are candidates for use on sharp leading edges of hypersonic vehicles. NASA Ames has been investigating the use of UHTCs in the HfB2/SiC family under NASA's Fundamental Aeronautics Program. The goal of this work has been to tailor the microstructure to improve mechanical properties and the performance in reentry conditions, as determined by arcjet testing. This talk discusses results of mechanical evaluation and arcjet testing of various materials with different microstructures, including the incorporation of high-temperature fibers in these materials to improve fracture toughness. Some preliminary information on UHTC composites will also be discussed.

Microstructural causes of negative creep in cast superalloys

International Nuclear Information System (INIS)

Frank, G.

1990-01-01

The dissertation examines by means of microstructural investigations and modelling calculations two types of superalloys: the nickel-base cast alloy IN 738 LC (γ'-hardened, containing MC and M 23 C 6 carbides), and the cobalt-base cast alloy FSX 414 (containing M 23 C 6 carbides, solid solution-hardened). The task was to determine the causes of microstructural volume contraction, in order to improve and facilitate explanation and extrapolation of the materials' long-term behaviour at high temperatures, and to derive if possible information on appropriate measures preventing negative creep, which may lead to critical damage of bolted joints, for instance. (orig./MM) [de

Autism Spectrum Disorder Updates – Relevant Information for Early Interventionists to Consider

Science.gov (United States)

Allen-Meares, Paula; MacDonald, Megan; McGee, Kristin

2016-01-01

Autism spectrum disorder (ASD) is a pervasive developmental disorder characterized by deficits in social communication skills as well as repetitive, restricted or stereotyped behaviors (1). Early interventionists are often found at the forefront of assessment, evaluation, and early intervention services for children with ASD. The role of an early intervention specialist may include assessing developmental history, providing group and individual counseling, working in partnership with families on home, school, and community environments, mobilizing school and community resources, and assisting in the development of positive early intervention strategies (2, 3). The commonality among these roles resides in the importance of providing up-to-date, relevant information to families and children. The purpose of this review is to provide pertinent up-to-date knowledge for early interventionists to help inform practice in working with individuals with ASD, including common behavioral models of intervention. PMID:27840812

Characterization of ductile fracture properties of quench-hardenable boron steel: Influence of microstructure and processing conditions

International Nuclear Information System (INIS)

Golling, Stefan; Östlund, Rickard; Oldenburg, Mats

2016-01-01

Developments of the hot stamping technology have enabled the production of components with differential microstructure composition and mechanical properties. These can increase the performance of certain crash-relevant automotive structures by combining high intrusion protection and energy absorption. This paper presents a comprehensive experimental investigation on the flow and ductile fracture properties of boron-alloyed steel with a wide range of different microstructure compositions. Three types of dual phase microstructures at three different volume fractions, and one triple phase grade, were generated by thermal treatment. Flow curves extending beyond necking and the equivalent plastic strain to fracture for each grade was determined by tensile testing using full-field measurements. The influence of phase composition and microstructural parameters were further investigated by means of a multi-scale modeling approach based on mean-field homogenization in combination with local fracture criteria. Inter-phase and intra-phase fracture mechanisms were considered by adopting two separate fracture criteria formulated in terms of the local average stress field. The micromechanical model captures with useful accuracy the strong influence of microstructure and processing conditions on the flow and fracture properties, implying promising prospects of mean-field homogenization for the constitutive modeling of hot stamped components.

Characterization of ductile fracture properties of quench-hardenable boron steel: Influence of microstructure and processing conditions

Energy Technology Data Exchange (ETDEWEB)

Golling, Stefan, E-mail: stefan.golling@ltu.se [Luleå University of Technology, SE 971 87 Luleå (Sweden); Östlund, Rickard [Gestamp HardTech, Ektjärnsvägen 5, SE 973 45 Luleå (Sweden); Oldenburg, Mats [Luleå University of Technology, SE 971 87 Luleå (Sweden)

2016-03-21

Developments of the hot stamping technology have enabled the production of components with differential microstructure composition and mechanical properties. These can increase the performance of certain crash-relevant automotive structures by combining high intrusion protection and energy absorption. This paper presents a comprehensive experimental investigation on the flow and ductile fracture properties of boron-alloyed steel with a wide range of different microstructure compositions. Three types of dual phase microstructures at three different volume fractions, and one triple phase grade, were generated by thermal treatment. Flow curves extending beyond necking and the equivalent plastic strain to fracture for each grade was determined by tensile testing using full-field measurements. The influence of phase composition and microstructural parameters were further investigated by means of a multi-scale modeling approach based on mean-field homogenization in combination with local fracture criteria. Inter-phase and intra-phase fracture mechanisms were considered by adopting two separate fracture criteria formulated in terms of the local average stress field. The micromechanical model captures with useful accuracy the strong influence of microstructure and processing conditions on the flow and fracture properties, implying promising prospects of mean-field homogenization for the constitutive modeling of hot stamped components.

Historical maintenance relevant information road-map for a self-learning maintenance prediction procedural approach

Science.gov (United States)

Morales, Francisco J.; Reyes, Antonio; Cáceres, Noelia; Romero, Luis M.; Benitez, Francisco G.; Morgado, Joao; Duarte, Emanuel; Martins, Teresa

2017-09-01

A large percentage of transport infrastructures are composed of linear assets, such as roads and rail tracks. The large social and economic relevance of these constructions force the stakeholders to ensure a prolonged health/durability. Even though, inevitable malfunctioning, breaking down, and out-of-service periods arise randomly during the life cycle of the infrastructure. Predictive maintenance techniques tend to diminish the appearance of unpredicted failures and the execution of needed corrective interventions, envisaging the adequate interventions to be conducted before failures show up. This communication presents: i) A procedural approach, to be conducted, in order to collect the relevant information regarding the evolving state condition of the assets involved in all maintenance interventions; this reported and stored information constitutes a rich historical data base to train Machine Learning algorithms in order to generate reliable predictions of the interventions to be carried out in further time scenarios. ii) A schematic flow chart of the automatic learning procedure. iii) Self-learning rules from automatic learning from false positive/negatives. The description, testing, automatic learning approach and the outcomes of a pilot case are presented; finally some conclusions are outlined regarding the methodology proposed for improving the self-learning predictive capability.

No differences in brain microstructure between young KIBRA-C carriers and non-carriers.

Science.gov (United States)

Hu, Li; Xu, Qunxing; Li, Jizhen; Wang, Feifei; Xu, Xinghua; Sun, Zhiyuan; Ma, Xiangxing; Liu, Yong; Wang, Qing; Wang, Dawei

2018-01-02

KIBRA rs17070145 polymorphism is associated with variations in memory function and the microstructure of related brain areas. Diffusion kurtosis imaging (DKI) as an extension of diffusion tensor imaging that can provide more information about changes in microstructure, based on the idea that water diffusion in biological tissues is heterogeneous due to structural hindrance and restriction. We used DKI to explore the relationship between KIBRA gene polymorphism and brain microstructure in young adults. We recruited 100 healthy young volunteers, including 53 TT carriers and 47 C allele carriers. No differences were detected between the TT homozygotes and C-allele carriers for any diffusion and kurtosis parameter. These results indicate KIBRA rs17070145 polymorphism likely has little or no effect on brain microstructure in young adults.

Microstructure Modeling of 3rd Generation Disk Alloys

Science.gov (United States)

Jou, Herng-Jeng

2010-01-01

The objective of this program is to model, validate, and predict the precipitation microstructure evolution, using PrecipiCalc (QuesTek Innovations LLC) software, for 3rd generation Ni-based gas turbine disc superalloys during processing and service, with a set of logical and consistent experiments and characterizations. Furthermore, within this program, the originally research-oriented microstructure simulation tool will be further improved and implemented to be a useful and user-friendly engineering tool. In this report, the key accomplishment achieved during the second year (2008) of the program is summarized. The activities of this year include final selection of multicomponent thermodynamics and mobility databases, precipitate surface energy determination from nucleation experiment, multiscale comparison of predicted versus measured intragrain precipitation microstructure in quench samples showing good agreement, isothermal coarsening experiment and interaction of grain boundary and intergrain precipitates, primary microstructure of subsolvus treatment, and finally the software implementation plan for the third year of the project. In the following year, the calibrated models and simulation tools will be validated against an independently developed experimental data set, with actual disc heat treatment process conditions. Furthermore, software integration and implementation will be developed to provide material engineers valuable information in order to optimize the processing of the 3rd generation gas turbine disc alloys.

microstructure change in 12 % Cr steel during creep

International Nuclear Information System (INIS)

Winatapura, D. S.; Panjaitan, E.; Arslan, A.; Sulistioso, G.S.

1998-01-01

The microstructure change in steel containing of 12% Cr or DIN X20CrMoV 12 1 during creep has been studied by means of optical microscopy and Transmission Electron Microscope (TEM). The creep testing at 650 o C was conducted under constant load of 650 Mpa. The heat treatment of the specimen before creep testing was austenization, followed by tempering for 2 hours. The obtained microstructure was tempered martensitic. This microstructure consisted of the martensite laths, and distributed randomly in the matrix. During tempering, chromium carbide particles of Cr 7 C 6 less than 0,2 μmin-size were precipitated on or and in the subgrain and lath martensite grain boundary. During creep testing those particles transformed and precipitated as chrome carbide precipitates of Cr 23 C 6 . At the secondary creep stage, the void formation occurred, and then it developed into the creep cracks. At tertiary creep stage for 3554 hours, the specimen was failure. The creep cracks were informs of transgranular and intergranular modes which propagated almost perpendicular to the stress axis. From this observation, it is suggested that tempering caused the ductility of martensitic microstructure, which increased the creep resistant or Cr 12% steel

A neural mechanism of dynamic gating of task-relevant information by top-down influence in primary visual cortex.

Science.gov (United States)

Kamiyama, Akikazu; Fujita, Kazuhisa; Kashimori, Yoshiki

2016-12-01

Visual recognition involves bidirectional information flow, which consists of bottom-up information coding from retina and top-down information coding from higher visual areas. Recent studies have demonstrated the involvement of early visual areas such as primary visual area (V1) in recognition and memory formation. V1 neurons are not passive transformers of sensory inputs but work as adaptive processor, changing their function according to behavioral context. Top-down signals affect tuning property of V1 neurons and contribute to the gating of sensory information relevant to behavior. However, little is known about the neuronal mechanism underlying the gating of task-relevant information in V1. To address this issue, we focus on task-dependent tuning modulations of V1 neurons in two tasks of perceptual learning. We develop a model of the V1, which receives feedforward input from lateral geniculate nucleus and top-down input from a higher visual area. We show here that the change in a balance between excitation and inhibition in V1 connectivity is necessary for gating task-relevant information in V1. The balance change well accounts for the modulations of tuning characteristic and temporal properties of V1 neuronal responses. We also show that the balance change of V1 connectivity is shaped by top-down signals with temporal correlations reflecting the perceptual strategies of the two tasks. We propose a learning mechanism by which synaptic balance is modulated. To conclude, top-down signal changes the synaptic balance between excitation and inhibition in V1 connectivity, enabling early visual area such as V1 to gate context-dependent information under multiple task performances. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

What's New in the Medicine Cabinet?: A Panoramic Review of Clinically Relevant Information for the Busy Dermatologist.

Science.gov (United States)

Del Rosso, James Q; Zeichner, Joshua

2014-01-01

This article is the first in a periodic series of therapeutic topics with short reviews gleaned from major dermatology meetings, especially Scientific Poster Sessions, and is designed to provide information that may assist the readers in adapting information from the literature to their clinical practice. The topics covered in this issue are discussions of the clinical relevance of newer information about acne pathophysiology, acne in adult women, and topical corticosteroid spray formulations for chronic plaque psoriasis.

Evaluation of relevant information for optimal reflector modeling through data assimilation procedures

International Nuclear Information System (INIS)

Argaud, J.P.; Bouriquet, B.; Clerc, T.; Lucet-Sanchez, F.; Poncot, A.

2015-01-01

The goal of this study is to look after the amount of information that is mandatory to get a relevant parameters optimisation by data assimilation for physical models in neutronic diffusion calculations, and to determine what is the best information to reach the optimum of accuracy at the cheapest cost. To evaluate the quality of the optimisation, we study the covariance matrix that represents the accuracy of the optimised parameter. This matrix is a classical output of the data assimilation procedure, and it is the main information about accuracy and sensitivity of the parameter optimal determination. We present some results collected in the field of neutronic simulation for PWR type reactor. We seek to optimise the reflector parameters that characterise the neutronic reflector surrounding the whole reactive core. On the basis of the configuration studies, it has been shown that with data assimilation we can determine a global strategy to optimise the quality of the result with respect to the amount of information provided. The consequence of this is a cost reduction in terms of measurement and/or computing time with respect to the basic approach. Another result is that using multi-campaign data rather data from a unique campaign significantly improves the efficiency of parameters optimisation

Age differences in default and reward networks during processing of personally relevant information.

Science.gov (United States)

Grady, Cheryl L; Grigg, Omer; Ng, Charisa

2012-06-01

We recently found activity in default mode and reward-related regions during self-relevant tasks in young adults. Here we examine the effect of aging on engagement of the default network (DN) and reward network (RN) during these tasks. Previous studies have shown reduced engagement of the DN and reward areas in older adults, but the influence of age on these circuits during self-relevant tasks has not been examined. The tasks involved judging personality traits about one's self or a well known other person. There were no age differences in reaction time on the tasks but older adults had more positive Self and Other judgments, whereas younger adults had more negative judgments. Both groups had increased DN and RN activity during the self-relevant tasks, relative to non-self tasks, but this increase was reduced in older compared to young adults. Functional connectivity of both networks during the tasks was weaker in the older relative to younger adults. Intrinsic functional connectivity, measured at rest, also was weaker in the older adults in the DN, but not in the RN. These results suggest that, in younger adults, the processing of personally relevant information involves robust activation of and functional connectivity within these two networks, in line with current models that emphasize strong links between the self and reward. The finding that older adults had more positive judgments, but weaker engagement and less consistent functional connectivity in these networks, suggests potential brain mechanisms for the "positivity bias" with aging. Copyright © 2012 Elsevier Ltd. All rights reserved.

Microstructure and degradation performance of biodegradable Mg-Si-Sr implant alloys.

Science.gov (United States)

Gil-Santos, Andrea; Marco, Iñigo; Moelans, Nele; Hort, Norbert; Van der Biest, Omer

2017-02-01

In this work the microstructure and degradation behavior of several as-cast alloy compositions belonging to the Mg rich corner of the Mg-Si-Sr system are presented and related. The intermetallic phases are identified and analyzed describing the microstructure evolution during solidification. It is intended in this work to obtain insight in the behavior of the ternary alloys in in vitro tests and to analyze the degradation behavior of the alloys under physiologically relevant conditions. The as-cast specimens have been exposed to immersion tests, both mass loss (ML) and potentiodynamic polarization (PDP). The degradation rate (DR) have been assessed and correlated to microstructure features, impurity levels and alloy composition. The initial reactions resulted to be more severe while the degradation stabilizes with time. A higher DR is related with a high content of the Mg 17 Sr 2 phase and with the presence of coarse particles of the intermetallics Mg 2 Si, MgSiSr and MgSi 2 Sr. Specimens with a higher DR typically have higher levels of impurities and alloy contents. Copyright © 2016 Elsevier B.V. All rights reserved.

Microstructural imaging of human neocortex in vivo.

Science.gov (United States)

Edwards, Luke J; Kirilina, Evgeniya; Mohammadi, Siawoosh; Weiskopf, Nikolaus

2018-03-24

The neocortex of the human brain is the seat of higher brain function. Modern imaging techniques, chief among them magnetic resonance imaging (MRI), allow non-invasive imaging of this important structure. Knowledge of the microstructure of the neocortex has classically come from post-mortem histological studies of human tissue, and extrapolations from invasive animal studies. From these studies, we know that the scale of important neocortical structure spans six orders of magnitude, ranging from the size of axonal diameters (microns), to the size of cortical areas responsible for integrating sensory information (centimetres). MRI presents an opportunity to move beyond classical methods, because MRI is non-invasive and MRI contrast is sensitive to neocortical microstructure over all these length scales. MRI thus allows inferences to be made about neocortical microstructure in vivo, i.e. MRI-based in vivo histology. We review recent literature that has applied and developed MRI-based in vivo histology to probe the microstructure of the human neocortex, focusing specifically on myelin, iron, and neuronal fibre mapping. We find that applications such as cortical parcellation (using R 1 maps as proxies for myelin content) and investigation of cortical iron deposition with age (using R 2 * maps) are already contributing to the frontiers of knowledge in neuroscience. Neuronal fibre mapping in the cortex remains challenging in vivo, but recent improvements in diffusion MRI hold promise for exciting applications in the near future. The literature also suggests that utilising multiple complementary quantitative MRI maps could increase the specificity of inferences about neocortical microstructure relative to contemporary techniques, but that further investment in modelling is required to appropriately combine the maps. In vivo histology of human neocortical microstructure is undergoing rapid development. Future developments will improve its specificity, sensitivity, and

Autism spectrum disorder updates – relevant information for early interventionists to consider

Directory of Open Access Journals (Sweden)

Paula Allen-Meares

2016-10-01

Full Text Available Autism spectrum disorder (ASD is a pervasive developmental disorder characterized by deficits in social communication skills as well as repetitive, restricted or stereotyped behaviors (1. Early interventionists are often found at the forefront of assessment, evaluation and early intervention services for children with ASD. The role of an early intervention specialist may include, assessing developmental history, providing group and individual counseling, working in partnership with families on home, school, and community environments, mobilizing school and community resources and assisting in the development of positive early intervention strategies (2, 3. The commonality amongst these roles resides in the importance of providing up-to-date, relevant information to families and children. The purpose of this review is to provide pertinent up-to-date knowledge for early interventionists to help inform practice in working with individuals with ASD, including common behavioral models of intervention.

Correlation between microstructure and the creep behaviour at high temperature of Alloy 800 H

International Nuclear Information System (INIS)

Spiradek, K.; Degischer, H.P.; Lahodny, H.

1989-01-01

A systematic metallographic study was performed to identify the nature of the microstructural changes occurring during high temperature creep deformation of Alloy 800 H. Creep tests were carried out at 800 deg. C under constant load conditions corresponding to the initial stresses between 25 and 80 MPa. Some tests were interrupted after certain elongations to provide the samples for electron microscopy. Emphasis was put on the creep periods relevant to design where only a few per cent of deformation are tolerable. The influence of the initial material conditions on the creep behaviour was examined. Variations of the initial microstructures were achieved by different solution treatments (980/1250) deg. C, preageing at 800 deg. C (0/6400) h and cold deformation up to 10% followed by ageing at 800 deg. C. The results of the microstructural examinations were correlated with the creep curves that provide a basis for identification of the creep mechanisms operating at the test conditions. (author). 14 refs, 17 figs

Microstructural strength of tidal soils – a rheometric approach to develop pedotransfer functions

Directory of Open Access Journals (Sweden)

Stoppe Nina

2018-03-01

Full Text Available Differences in soil stability, especially in visually comparable soils can occur due to microstructural processes and interactions. By investigating these microstructural processes with rheological investigations, it is possible to achieve a better understanding of soil behaviour from the mesoscale (soil aggregates to macroscale (bulk soil. In this paper, a rheological investigation of the factors influencing microstructural stability of riparian soils was conducted. Homogenized samples of Marshland soils from the riparian zone of the Elbe River (North Germany were analyzed with amplitude sweeps (AS under controlled shear deformation in a modular compact rheometer MCR 300 (Anton Paar, Germany at different matric potentials. A range physicochemical parameters were determined (texture, pH, organic matter, CaCO3 etc. and these factors were used to parameterize pedotransfer functions. The results indicate a clear dependence of microstructural elasticity on texture and water content. Although the influence of individual physicochemical factors varies depending on texture, the relevant features were identified taking combined effects into account. Thus, stabilizing factors are: organic matter, calcium ions, CaCO3 and pedogenic iron oxides; whereas sodium ions and water content represent structurally unfavorable factors. Based on the determined statistical relationships between rheological and physicochemical parameters, pedotransfer functions (PTF have been developed.

Japanese Quality Assurance System Regarding the Provision of Material Accounting Reports and the Safeguards Relevant Information to the IAEA

International Nuclear Information System (INIS)

Goto, Y.; Namekawa, M.; Kumekawa, H.; Usui, A.; Sano, K.

2015-01-01

The provision of the safeguards relevant reports and information in accordance with the comprehensive safeguards agreement (CSA) and the additional protocol (AP) is the basis for the IAEA safeguards. The government of Japan (Japan Safeguards Office, JSGO) has believed that the correct reports contribute to effective and efficient safeguards therefore the domestic quality assurance system for the reporting to the IAEA was already established at the time of the accession of the CSA in 1977. It consists of Code 10 interpretation (including the seminars for operators in Japan), SSAC's checks for syntax error, code and internal consistency (computer based consistency check between facilities) and the discussion with the IAEA on the facilities' measurement system for bulk-handling facilities, which contributes to the more accurate reports from operators. This spirit has been maintained for the entry into force of the AP. For example, questions and amplification from the IAEA will be taken into account the review of the AP declaration before sending to the IAEA and the open source information such as news article and scientific literature in Japanese is collected and translated into English, and the translated information is provided to the IAEA as the supplementary information, which may contribute to broadening the IAEA information source and to their comprehensive evaluation. The other safeguards relevant information, such as the mail-box information for SNRI at LEU fuel fabrication plants, is also checked by the JSGO's QC software before posting. The software was developed by JSGO and it checks data format, batch IDs, birth/death date, shipper/receiver information and material description code. This paper explains the history of the development of the Japanese quality assurance system regarding the reports and the safeguards relevant information to the IAEA. (author)

ERP investigation of attentional disengagement from suicide-relevant information in patients with major depressive disorder.

Science.gov (United States)

Baik, Seung Yeon; Jeong, Minkyung; Kim, Hyang Sook; Lee, Seung-Hwan

2018-01-01

Previous studies suggest the presence of attentional bias towards suicide-relevant information in suicidal individuals. However, the findings are limited by their reliance on behavioral measures. This study investigates the role of difficulty in disengaging attention from suicide-relevant stimuli using the P300 component of event-related potentials (ERPs). Forty-four adults with Major Depressive Disorder (MDD) were administered the spatial cueing task using suicide-relevant and negatively-valenced words as cue stimuli. Disengagement difficulty was measured using reaction time and P300 during invalid trials. P300 amplitudes at Pz were higher in suicide-relevant compared to negatively-valenced word condition on invalid trials for participants with low rates of suicidal behavior. However, no such difference was found among participants with high rates of suicidal behavior. P300 amplitudes for suicide-relevant word condition were negatively correlated with "lifetime suicide ideation and attempt" at Pz. No significant results were found for the reaction time data, indicating that the ERP may be more sensitive in capturing the attentional disengagement effect. The groups were divided according to Suicidal Behaviors Questionnaire-Revised (SBQ-R) total score. Neutral stimulus was not included as cue stimuli. Most participants were under medication during the experiment. Our results indicate that patients with MDD and low rates of suicidal behavior show difficulty in disengaging attention from suicide-relevant stimuli. We suggest that suicide-specific disengagement difficulties may be related to recentness of suicide attempt and that acquired capability for suicide may contribute to reduced disengagement difficulties. Copyright © 2017 Elsevier B.V. All rights reserved.

Microstructure/Oxidation/Microhardness Correlations in Gamma-Based and Tau-Based Al-Ti-Cr Alloys

Science.gov (United States)

Brady, Michael P.; Smialek, J. L.; Humphrey, D. L.

1994-01-01

The relationships between alloy microstructure and air oxidation kinetics and alloy microstructure and microhardness in the Al-Ti-Cr system for exposures at 800 C and 1000 C were investigated. The relevant phases were identified as tau (Ll2), gamma (LIO), r-Al2Ti, TiCrAl (laves), and Cr2AI. Protective alumina formation was associated with tau, Al-rich TiCrAl, and gamma/TiCrAl mixtures. Brittleness was associated with the TiCrAl phase and tau decomposition to A12Ti + Cr2AI. It was concluded that two-phase gamma + TiCrAl alloys offer the greatest potential for oxidation resistance and room temperature ductility in the Al-Ti-Cr system.

Hot deformation behavior and microstructure evolution of TA15 titanium alloy with nonuniform microstructure

Energy Technology Data Exchange (ETDEWEB)

Gao, Pengfei; Zhan, Mei, E-mail: zhanmei@nwpu.edu.cn; Fan, Xiaoguang; Lei, Zhenni; Cai, Yang

2017-03-24

The flow behavior and microstructure evolution of a near α titanium alloy with nonuniform microstructure during hot deformation were studied by isothermal compression test and electron backscatter diffraction technique. It is found that the nonuniform microstructure prior to deformation consists of equiaxed α, lamellar α in the colony form and β phase, and the α colony keeps the Burgers orientation relationship with β phase. The flow stress of nonuniform microstructure exhibits significant flow softening after reaching the peak stress at a low strain, which is similar to the lamellar microstructure. Nevertheless, the existence of equiaxed α in nonuniform microstructure makes its flow stress and softening rate be lower than the lamellar microstructure. During deformation, the lamellar α undertakes most of the deformation and turns to be rotated, bended and globularized. Moreover, these phenomena exhibit significant heterogeneity due to the orientation dependence of the deformation of lamellar α. The continuous dynamic recrystallization and bending of lamellar α lead to the “fragmentation” during globularization of lamellar α. The bending of lamellar α is speculated as a form of plastic buckling, because the bending of lamellar α almost proceed in the manner of “rigid rotation” and presents opposite bending directions for the adjacent colonies.

Stochastic Effects in Microstructure

Directory of Open Access Journals (Sweden)

Glicksman M.E.

2002-01-01

Full Text Available We are currently studying microstructural responses to diffusion-limited coarsening in two-phase materials. A mathematical solution to late-stage multiparticle diffusion in finite systems is formulated with account taken of particle-particle interactions and their microstructural correlations, or "locales". The transition from finite system behavior to that for an infinite microstructure is established analytically. Large-scale simulations of late-stage phase coarsening dynamics show increased fluctuations with increasing volume fraction, Vv, of the mean flux entering or leaving particles of a given size class. Fluctuations about the mean flux were found to depend on the scaled particle size, R/, where R is the radius of a particle and is the radius of the dispersoid averaged over the population within the microstructure. Specifically, small (shrinking particles tend to display weak fluctuations about their mean flux, whereas particles of average, or above average size, exhibit strong fluctuations. Remarkably, even in cases of microstructures with a relatively small volume fraction (Vv ~ 10-4, the particle size distribution is broader than that for the well-known Lifshitz-Slyozov limit predicted at zero volume fraction. The simulation results reported here provide some additional surprising insights into the effect of diffusion interactions and stochastic effects during evolution of a microstructure, as it approaches its thermodynamic end-state.

Differential impact of relevant and irrelevant dimension primes on rule-based and information-integration category learning.

Science.gov (United States)

Grimm, Lisa R; Maddox, W Todd

2013-11-01

Research has identified multiple category-learning systems with each being "tuned" for learning categories with different task demands and each governed by different neurobiological systems. Rule-based (RB) classification involves testing verbalizable rules for category membership while information-integration (II) classification requires the implicit learning of stimulus-response mappings. In the first study to directly test rule priming with RB and II category learning, we investigated the influence of the availability of information presented at the beginning of the task. Participants viewed lines that varied in length, orientation, and position on the screen, and were primed to focus on stimulus dimensions that were relevant or irrelevant to the correct classification rule. In Experiment 1, we used an RB category structure, and in Experiment 2, we used an II category structure. Accuracy and model-based analyses suggested that a focus on relevant dimensions improves RB task performance later in learning while a focus on an irrelevant dimension improves II task performance early in learning. © 2013.

Geospatial Information Relevant to the Flood Protection Available on The Mainstream Web

Directory of Open Access Journals (Sweden)

Kliment Tomáš

2014-03-01

Full Text Available Flood protection is one of several disciplines where geospatial data is very important and is a crucial component. Its management, processing and sharing form the foundation for their efficient use; therefore, special attention is required in the development of effective, precise, standardized, and interoperable models for the discovery and publishing of data on the Web. This paper describes the design of a methodology to discover Open Geospatial Consortium (OGC services on the Web and collect descriptive information, i.e., metadata in a geocatalogue. A pilot implementation of the proposed methodology - Geocatalogue of geospatial information provided by OGC services discovered on Google (hereinafter “Geocatalogue” - was used to search for available resources relevant to the area of flood protection. The result is an analysis of the availability of resources discovered through their metadata collected from the OGC services (WMS, WFS, etc. and the resources they provide (WMS layers, WFS objects, etc. within the domain of flood protection.

MR-based trabecular bone microstructure is not altered in subjects with indolent systemic mastocytosis.

Science.gov (United States)

Baum, Thomas; Karampinos, Dimitrios C; Brockow, Knut; Seifert-Klauss, Vanadin; Jungmann, Pia M; Biedermann, Tilo; Rummeny, Ernst J; Bauer, Jan S; Müller, Dirk

2015-01-01

Subjects with indolent systemic mastocytosis (ISM) have an increased risk for osteoporosis. It has been demonstrated that trabecular bone microstructure analysis improves the prediction of bone strength beyond dual-energy X-ray absorptiometry-based bone mineral density. The purpose of this study was to obtain Magnetic Resonance (MR)-based trabecular bone microstructure parameters as advanced imaging biomarkers in subjects with ISM (n=18) and compare them with those of normal controls (n=18). Trabecular bone microstructure parameters were not significantly (P>.05) different between subjects with ISM and controls. These findings revealed important pathophysiological information about ISM-associated osteoporosis and may limit the use of trabecular bone microstructure analysis in this clinical setting. Copyright © 2015 Elsevier Inc. All rights reserved.

Microstructure imaging of human rectal mucosa using multiphoton microscopy

Science.gov (United States)

Liu, N. R.; Chen, G.; Chen, J. X.; Yan, J.; Zhuo, S. M.; Zheng, L. Q.; Jiang, X. S.

2011-01-01

Multiphoton microscopy (MPM) has high resolution and sensitivity. In this study, MPM was used to image microstructure of human rectal mucosa. The morphology and distribution of the main components in mucosa layer, absorptive cells and goblet cells in the epithelium, abundant intestinal glands in the lamina propria and smooth muscle fibers in the muscularis mucosa were clearly monitored. The variations of these components were tightly relevant to the pathology in gastrointestine system, especially early rectal cancer. The obtained images will be helpful for the diagnosis of early colorectal cancer.

Post-encoding control of working memory enhances processing of relevant information in rhesus monkeys (Macaca mulatta).

Science.gov (United States)

Brady, Ryan J; Hampton, Robert R

2018-06-01

Working memory is a system by which a limited amount of information can be kept available for processing after the cessation of sensory input. Because working memory resources are limited, it is adaptive to focus processing on the most relevant information. We used a retro-cue paradigm to determine the extent to which monkey working memory possesses control mechanisms that focus processing on the most relevant representations. Monkeys saw a sample array of images, and shortly after the array disappeared, they were visually cued to a location that had been occupied by one of the sample images. The cue indicated which image should be remembered for the upcoming recognition test. By determining whether the monkeys were more accurate and quicker to respond to cued images compared to un-cued images, we tested the hypothesis that monkey working memory focuses processing on relevant information. We found a memory benefit for the cued image in terms of accuracy and retrieval speed with a memory load of two images. With a memory load of three images, we found a benefit in retrieval speed but only after shortening the onset latency of the retro-cue. Our results demonstrate previously unknown flexibility in the cognitive control of memory in monkeys, suggesting that control mechanisms in working memory likely evolved in a common ancestor of humans and monkeys more than 32 million years ago. Future work should be aimed at understanding the interaction between memory load and the ability to control memory resources, and the role of working memory control in generating differences in cognitive capacity among primates. Copyright © 2018 Elsevier B.V. All rights reserved.

Exploring the information and communication technology competence and confidence of nursing students and their perception of its relevance to clinical practice.

Science.gov (United States)

Levett-Jones, Tracy; Kenny, Raelene; Van der Riet, Pamela; Hazelton, Michael; Kable, Ashley; Bourgeois, Sharon; Luxford, Yoni

2009-08-01

This paper profiles a study that explored nursing students' information and communication technology competence and confidence. It presents selected findings that focus on students' attitudes towards information and communication technology as an educational methodology and their perceptions of its relevance to clinical practice. Information and communication technology is integral to contemporary nursing practice. Development of these skills is important to ensure that graduates are 'work ready' and adequately prepared to practice in increasingly technological healthcare environments. This was a mixed methods study. Students (n=971) from three Australian universities were surveyed using an instrument designed specifically for the study, and 24 students participated in focus groups. The focus group data revealed that a number of students were resistant to the use of information and communication technology as an educational methodology and lacked the requisite skills and confidence to engage successfully with this educational approach. Survey results indicated that 26 per cent of students were unsure about the relevance of information and communication technology to clinical practice and only 50 per cent felt 'very confident' using a computer. While the importance of information and communication technology to student's learning and to their preparedness for practice has been established, it is evident that students' motivation is influenced by their level of confidence and competence, and their understanding of the relevance of information and communication technology to their future careers.

Studies of fracture processes in Cr-Mo-V ferritic steel with various types of microstructures

Energy Technology Data Exchange (ETDEWEB)

Dzioba, I., E-mail: pkmid@tu.kielce.p [Fundamentals of Machine Design Chair, Kielce University of Technology, Al.1000-lecia PP 7, 25-314 Kielce (Poland); Gajewski, M., E-mail: gajem@tu.kielce.p [Fundamentals of Machine Design Chair, Kielce University of Technology, Al.1000-lecia PP 7, 25-314 Kielce (Poland); Neimitz, A., E-mail: neimitz@tu.kielce.p [Fundamentals of Machine Design Chair, Kielce University of Technology, Al.1000-lecia PP 7, 25-314 Kielce (Poland)

2010-10-15

In this paper, the authors report on analysis of the influence of microstructure on ductile and cleavage fracture mechanisms. The question investigated was whether microstructure observations alone can provide sufficient information to predict the possible fracture mechanism or change in fracture mechanism. Four different microstructures of ferritic steel were tested after four different heat treatments. The microstructures examined were ferritic, ferritic-pearlitic, ferritic-bainitic, and tempered martensitic types. It was concluded that the ratio (S{sub C}/S{sub 0}) of the area covered by carbides to the total area of a ferritic grain (measured by taking into account large carbides) is the only possible quantitative measure that can be used to predict cleavage fracture.

Imaging brain tumour microstructure.

Science.gov (United States)

Nilsson, Markus; Englund, Elisabet; Szczepankiewicz, Filip; van Westen, Danielle; Sundgren, Pia C

2018-05-08

Imaging is an indispensable tool for brain tumour diagnosis, surgical planning, and follow-up. Definite diagnosis, however, often demands histopathological analysis of microscopic features of tissue samples, which have to be obtained by invasive means. A non-invasive alternative may be to probe corresponding microscopic tissue characteristics by MRI, or so called 'microstructure imaging'. The promise of microstructure imaging is one of 'virtual biopsy' with the goal to offset the need for invasive procedures in favour of imaging that can guide pre-surgical planning and can be repeated longitudinally to monitor and predict treatment response. The exploration of such methods is motivated by the striking link between parameters from MRI and tumour histology, for example the correlation between the apparent diffusion coefficient and cellularity. Recent microstructure imaging techniques probe even more subtle and specific features, providing parameters associated to cell shape, size, permeability, and volume distributions. However, the range of scenarios in which these techniques provide reliable imaging biomarkers that can be used to test medical hypotheses or support clinical decisions is yet unknown. Accurate microstructure imaging may moreover require acquisitions that go beyond conventional data acquisition strategies. This review covers a wide range of candidate microstructure imaging methods based on diffusion MRI and relaxometry, and explores advantages, challenges, and potential pitfalls in brain tumour microstructure imaging. Copyright © 2018. Published by Elsevier Inc.

TEM Characterization of High Burn-up Microstructure of U-7Mo Alloy

Energy Technology Data Exchange (ETDEWEB)

Jian Gan; Brandon Miller; Dennis Keiser; Adam Robinson; James Madden; Pavel Medvedev; Daniel Wachs

2014-04-01

As an essential part of global nuclear non-proliferation effort, the RERTR program is developing low enriched U-Mo fuels (< 20% U-235) for use in research and test reactors that currently employ highly enriched uranium fuels. One type of fuel being developed is a dispersion fuel plate comprised of U-7Mo particles dispersed in Al alloy matrix. Recent TEM characterizations of the ATR irradiated U-7Mo dispersion fuel plates include the samples with a local fission densities of 4.5, 5.2, 5.6 and 6.3 E+21 fissions/cm3 and irradiation temperatures of 101-136?C. The development of the irradiated microstructure of the U-7Mo fuel particles consists of fission gas bubble superlattice, large gas bubbles, solid fission product precipitates and their association to the large gas bubbles, grain subdivision to tens or hundreds of nanometer size, collapse of bubble superlattice, and amorphisation. This presentation will describe the observed microstructures specifically focusing on the U-7Mo fuel particles. The impact of the observed microstructure on the fuel performance and the comparison of the relevant features with that of the high burn-up UO2 fuels will be discussed.

The foundation of the concept of relevance

DEFF Research Database (Denmark)

Hjørland, Birger

2010-01-01

that what was regarded as the most fundamental view by Saracevic in 1975 has not since been considered (with very few exceptions). Other views, which are based on less fruitful assumptions, have dominated the discourse on relevance in information retrieval and information science. Many authors have...... reexamined the concept of relevance in information science, but have neglected the subject knowledge view, hence basic theoretical assumptions seem not to have been properly addressed. It is as urgent now as it was in 1975 seriously to consider “the subject knowledge view” of relevance (which may also...... be termed “the epistemological view”). The concept of relevance, like other basic concepts, is influenced by overall approaches to information science, such as the cognitive view and the domain-analytic view. There is today a trend toward a social paradigm for information science. This paper offers...

Computational discovery of extremal microstructure families

Science.gov (United States)

Chen, Desai; Skouras, Mélina; Zhu, Bo; Matusik, Wojciech

2018-01-01

Modern fabrication techniques, such as additive manufacturing, can be used to create materials with complex custom internal structures. These engineered materials exhibit a much broader range of bulk properties than their base materials and are typically referred to as metamaterials or microstructures. Although metamaterials with extraordinary properties have many applications, designing them is very difficult and is generally done by hand. We propose a computational approach to discover families of microstructures with extremal macroscale properties automatically. Using efficient simulation and sampling techniques, we compute the space of mechanical properties covered by physically realizable microstructures. Our system then clusters microstructures with common topologies into families. Parameterized templates are eventually extracted from families to generate new microstructure designs. We demonstrate these capabilities on the computational design of mechanical metamaterials and present five auxetic microstructure families with extremal elastic material properties. Our study opens the way for the completely automated discovery of extremal microstructures across multiple domains of physics, including applications reliant on thermal, electrical, and magnetic properties. PMID:29376124

Development of non-dendritic microstructures in AA6061 cast billets

Energy Technology Data Exchange (ETDEWEB)

Zhang, X.-D.; Chadwick, T.A.; Bryant, J.D. [Reynolds Metals Co., Chester, VA (United States)

2000-07-01

Non-dendritic structures have been shown to have many advantages over conventional, dendritic structures in castable aluminum alloys. Examples include high structural integrity, reduced porosity, excellent formability and enhanced near net-shape forming capability. Non-dendritic materials are characterized by an equiaxed, globularized grain structure. Previous work has focused on the application of these structures in traditional casting alloys such as A356 and A357, and on the processing of these alloys during semi-solid forming and squeeze casting. There is considerably less information on the impact of non-dendritic microstructures upon solid state deformation, and the use of such microstructures in the processing of traditional wrought aluminum alloys. In this paper, we will present our recent work in casting non-dendritic AA6061 alloy using different techniques, and discuss the effects of cast structure on deformation behavior during solid state processing at elevated temperatures. Cast microstructures were modified during direct chill casting using three different methods: magneto-hydrodynamic (MHD) agitation, mechanical stirring, and high loadings of grain refiner. A detailed microstructure characterization will be presented and discussed in terms of structural integrity, grain morphology, and their effects on deformation in the solid state. (orig.)

Relevant Factors in The Post-Merger Systems Integration and Information Technology in Brazilian Banks

Directory of Open Access Journals (Sweden)

Marcel Ginotti Pires

2017-01-01

Full Text Available This article discusses the factors present in post-merger integration of Systems and Information Technology (SIT that lead to positive and negative results in mergers and acquisitions (M & A. The research comprised three of the largest acquiring banks in Brazil. We adopted two methods of research, qualitative, to operationalize the theoretical concepts and quantitative, to test the hypotheses. We interviewed six executives of banks that held relevant experience in M & A processes. Subsequently, we applied questionnaires to IT professionals who were involved in the SIT integration processes. The results showed that the quality and expertise of the integration teams and managing the integration were the most relevant factors in the processes, with positive results for increased efficiency and the increased capacity of SIT. Negative results were due to failures in exploiting learning opportunities, the loss of employees and the inexpressive record of integration procedures.

Elaboration of a guide including relevant project and logistic information: a case study

Energy Technology Data Exchange (ETDEWEB)

Costa, Tchaikowisky M. [Faculdade de Tecnologia e Ciencias (FTC), Itabuna, BA (Brazil); Bresci, Claudio T.; Franca, Carlos M.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2009-07-01

For every mobilization of a new enterprise it is necessary to quickly obtain the greatest amount of relative information in regards to location and availability of infra-structure, logistics, and work site amenities. Among this information are reports elaborated for management of the enterprise, (organizational chart, work schedule, objectives, contacts, etc.) as well as geographic anomalies, social-economic and culture of the area to be developed such as territorial extension, land aspects, local population, roads and amenities (fuel stations ,restaurants and hotels), infra-structure of the cities (health, education, entertainment, housing, transport, etc.) and logistically the distance between cities the estimated travel time, ROW access maps and notable points, among other relevant information. With the idea of making this information available for everyone involved in the enterprise, it was elaborated for GASCAC Spread 2A a rapid guide containing all the information mentioned above and made it available for all the vehicles used to transport employees and visitors to the spread. With this, everyone quickly received the majority of information necessary in one place, in a practical, quick, and precise manner, since the information is always used and controlled by the same person. This study includes the model used in the gas pipeline GASCAC Spread 2A project and the methodology used to draft and update the information. Besides the above, a file in the GIS format was prepared containing all necessary planning, execution and tracking information for enterprise activities, from social communication to the execution of the works previously mentioned. Part of the GIS file information was uploaded to Google Earth so as to disclose the information to a greater group of people, bearing in mind that this program is free of charge and easy to use. (author)

Study of Cold Coiling Spring Steel on Microstructure and Cold Forming Performance

Science.gov (United States)

Jiang, Y.; Liang, Y. L.; Ming, Y.; Zhao, F.

2017-09-01

Medium-carbon cold-coiling locomotive spring steels were treated by a novel Q-P-T (quenching-partitioning-tempering) process. Scanning electron microscopy (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD) were used to characterize the relevant parameters of the steel. Results show that the microstructure of tested steel treated by Q-P-T process is a complex microstructures composed of martensite, bainite and retained austenite. The volume fraction of retained austenite (wt.%) is up to 31%. After pre-deforming and tempering again at 310°C, the plasticity of samples treated by Q-P-T process is still well. Fracture images show that the Q-P-T samples are ductile fracture. It is attributed to the higher volume fraction of the retained austenite and the interactions between the multi-phases in Q-P-T processed sample.

Deformation microstructures

DEFF Research Database (Denmark)

Hansen, N.; Huang, X.; Hughes, D.A.

2004-01-01

Microstructural characterization and modeling has shown that a variety of metals deformed by different thermomechanical processes follows a general path of grain subdivision, by dislocation boundaries and high angle boundaries. This subdivision has been observed to very small structural scales...... of the order of 10 nm, produced by deformation under large sliding loads. Limits to the evolution of microstructural parameters during monotonic loading have been investigated based on a characterization by transmission electron microscopy. Such limits have been observed at an equivalent strain of about 10...

Self-referential and anxiety-relevant information processing in subclinical social anxiety: an fMRI study.

Science.gov (United States)

Abraham, Anna; Kaufmann, Carolin; Redlich, Ronny; Hermann, Andrea; Stark, Rudolf; Stevens, Stephan; Hermann, Christiane

2013-03-01

The fear of negative evaluation is one of the hallmark features of social anxiety. Behavioral evidence thus far largely supports cognitive models which postulate that information processing biases in the face of socially relevant information are a key factor underlying this widespread phobia. So far only one neuroimaging study has explicitly focused on the fear of negative evaluation in social anxiety where the brain responses of social phobics were compared to healthy participants during the processing of self-referential relative to other-referential criticism, praise or neutral information. Only self-referential criticism led to stronger activations in emotion-relevant regions of the brain, such as the amygdala and medial prefrontal cortices (mPFC), in the social phobics. The objective of the current study was to determine whether these findings could be extended to subclinical social anxiety. In doing so, the specificity of this self-referential bias was also examined by including both social and non-social (physical illness-related) threat information as well as a highly health anxious control group in the experimental paradigm. The fMRI findings indicated that the processing of emotional stimuli was accompanied by activations in the amygdala and the ventral mPFC, while self-referential processing was associated with activity in regions such as the mPFC, posterior cingulate and temporal poles. Despite the validation of the paradigm, the results revealed that the previously reported behavioral and brain biases associated with social phobia could not be unequivocally extended to subclinical social anxiety. The divergence between the findings is explored in detail with reference to paradigm differences and conceptual issues.

The Impact of International Financial Reporting Standards on Market Microstructure in Europe

OpenAIRE

M. Lambert; G. Hübner; P.-A. Michel; H. Olivier

2006-01-01

By focusing on the investors, IFRS disclosure is intended to support economic guidance. The scope of this study is, therefore, to highlight key indicators for value relevance of the IFRS framework. Through a pan-European event study, we first consider the problem of confidence in investments and convergence in opinions. We deepen our analysis through a close examination of the conjoint evolution of three microstructure indicators: market volatility, liquidity, and bid-ask spread. Then, Cusum ...

Key Factors Influencing the Energy Absorption of Dual-Phase Steels: Multiscale Material Model Approach and Microstructural Optimization

Science.gov (United States)

Belgasam, Tarek M.; Zbib, Hussein M.

2018-06-01

The increase in use of dual-phase (DP) steel grades by vehicle manufacturers to enhance crash resistance and reduce body car weight requires the development of a clear understanding of the effect of various microstructural parameters on the energy absorption in these materials. Accordingly, DP steelmakers are interested in predicting the effect of various microscopic factors as well as optimizing microstructural properties for application in crash-relevant components of vehicle bodies. This study presents a microstructure-based approach using a multiscale material and structure model. In this approach, Digimat and LS-DYNA software were coupled and employed to provide a full micro-macro multiscale material model, which is then used to simulate tensile tests. Microstructures with varied ferrite grain sizes, martensite volume fractions, and carbon content in DP steels were studied. The impact of these microstructural features at different strain rates on energy absorption characteristics of DP steels is investigated numerically using an elasto-viscoplastic constitutive model. The model is implemented in a multiscale finite-element framework. A comprehensive statistical parametric study using response surface methodology is performed to determine the optimum microstructural features for a required tensile toughness at different strain rates. The simulation results are validated using experimental data found in the literature. The developed methodology proved to be effective for investigating the influence and interaction of key microscopic properties on the energy absorption characteristics of DP steels. Furthermore, it is shown that this method can be used to identify optimum microstructural conditions at different strain-rate conditions.

Self-relevant beauty evaluation: Evidence from an event-related potentials study.

Science.gov (United States)

Kong, Fanchang; Zhang, Yan; Tian, Yuan; Fan, Cuiying; Zhou, Zongkui

2015-03-01

This study examines the electrophysiological correlates of beauty evaluation when participants performed the self-reference task. About 13 (7 men, 6 women) undergraduates participated in the experiment using event-related potentials. Results showed that the response to self-relevant information was faster compared to other-relevant information and no significant differences for self-relevant relative to mother-relevant information were observed. Both physical and interior beauty words for self-relevant information showed an enhanced late positive component as compared to other-relevant information. Physical beauty for self-relevant information yielded a larger late positive component in contrast to mother-relevant information but not for interior beauty. This study indicates that beauty is specific to the person who judges it though an individual and one's mother may hold similar views of interior beauty.

Optics of dielectric microstructures

DEFF Research Database (Denmark)

Søndergaard, Thomas

2002-01-01

From the work carried out within the ph.d. project two topics have been selected for this thesis, namely emission of radiation by sources in dielectric microstructures, and planar photonic crystal waveguides. The work done within the first topic, emission of radiation by sources in dielectric...... microstructures, will be presented in the part I of this thesis consisting of the chapters 2-5. An introductions is given in chapter 2. In part I three methods are presented for calculating spontaneous and classical emission from sources in dielectric microstructures. The first method presented in chapter 3...... is based on the Fermi Golden Rule, and spontaneous emission from emitters in a passive dielectric microstructure is calculated by summing over the emission into each electromagnetic mode of the radiation field. This method is applied to investigate spontaneous emission in a two-dimensional photonic crystal...

Microstructuring of glasses

CERN Document Server

Hülsenberg, Dagmar; Bismarck, Alexander

2008-01-01

As microstructured glass becomes increasingly important for microsystems technology, the main application fields include micro-fluidic systems, micro-analysis systems, sensors, micro-actuators and implants. And, because glass has quite distinct properties from silicon, PMMA and metals, applications exist where only glass devices meet the requirements. The main advantages of glass derive from its amorphous nature, the precondition for its - theoretically - direction-independent geometric structurability. Microstructuring of Glasses deals with the amorphous state, various glass compositions and their properties, the interactions between glasses and the electromagnetic waves used to modify it. Also treated in detail are methods for influencing the geometrical microstructure of glasses by mechanical, chemical, thermal, optical, and electrical treatment, and the methods and equipment required to produce actual microdevices.

An analysis of contingent factors for the detection of strategic relevance in business information technologies

Directory of Open Access Journals (Sweden)

Antonio Paños Álvarez

2005-01-01

Full Text Available Information Technologies are resources able to create competitive advantages for companies. In this analysis, the Resource-based perspective have taken special relevance, because it is argued that this advantages should be identified, reached and maintained. This work is positioned in the analysis of several contingent factors in the process of pointing the possible assesment of these advantages. It is aproaching a portfolio for helping to select what Information Technologies are valuable for what companies and in what activity areas and the study of in what way the sector, the technological innovation profile, the size and the financial capacity of the companies affects this process

Microstructural Quantification, Property Prediction, and Stochastic Reconstruction of Heterogeneous Materials Using Limited X-Ray Tomography Data

Science.gov (United States)

Li, Hechao

An accurate knowledge of the complex microstructure of a heterogeneous material is crucial for quantitative structure-property relations establishment and its performance prediction and optimization. X-ray tomography has provided a non-destructive means for microstructure characterization in both 3D and 4D (i.e., structural evolution over time). Traditional reconstruction algorithms like filtered-back-projection (FBP) method or algebraic reconstruction techniques (ART) require huge number of tomographic projections and segmentation process before conducting microstructural quantification. This can be quite time consuming and computationally intensive. In this thesis, a novel procedure is first presented that allows one to directly extract key structural information in forms of spatial correlation functions from limited x-ray tomography data. The key component of the procedure is the computation of a "probability map", which provides the probability of an arbitrary point in the material system belonging to specific phase. The correlation functions of interest are then readily computed from the probability map. Using effective medium theory, accurate predictions of physical properties (e.g., elastic moduli) can be obtained. Secondly, a stochastic optimization procedure that enables one to accurately reconstruct material microstructure from a small number of x-ray tomographic projections (e.g., 20 - 40) is presented. Moreover, a stochastic procedure for multi-modal data fusion is proposed, where both X-ray projections and correlation functions computed from limited 2D optical images are fused to accurately reconstruct complex heterogeneous materials in 3D. This multi-modal reconstruction algorithm is proved to be able to integrate the complementary data to perform an excellent optimization procedure, which indicates its high efficiency in using limited structural information. Finally, the accuracy of the stochastic reconstruction procedure using limited X

Micromagnetism and the microstructure of ferromagnetic solids

CERN Document Server

Kronmüller, Helmut

2003-01-01

Here is a fundamental introduction to microstructure magnetic property relations where microstructures on atomic, nano- and micrometer scales are considered. The authors demonstrate that outstanding magnetic properties require an optimization of microstructural properties where the microstructures in crystalline materials are point defects and dislocations as well as grain and phase boundaries. In amorphous alloys the type of microstructures on atomic scales are defined and used to describe intrinsic and extrinsic properties.

Concurrent multiscale modeling of microstructural effects on localization behavior in finite deformation solid mechanics

Science.gov (United States)

Alleman, Coleman N.; Foulk, James W.; Mota, Alejandro; Lim, Hojun; Littlewood, David J.

2018-02-01

The heterogeneity in mechanical fields introduced by microstructure plays a critical role in the localization of deformation. To resolve this incipient stage of failure, it is therefore necessary to incorporate microstructure with sufficient resolution. On the other hand, computational limitations make it infeasible to represent the microstructure in the entire domain at the component scale. In this study, the authors demonstrate the use of concurrent multiscale modeling to incorporate explicit, finely resolved microstructure in a critical region while resolving the smoother mechanical fields outside this region with a coarser discretization to limit computational cost. The microstructural physics is modeled with a high-fidelity model that incorporates anisotropic crystal elasticity and rate-dependent crystal plasticity to simulate the behavior of a stainless steel alloy. The component-scale material behavior is treated with a lower fidelity model incorporating isotropic linear elasticity and rate-independent J2 plasticity. The microstructural and component scale subdomains are modeled concurrently, with coupling via the Schwarz alternating method, which solves boundary-value problems in each subdomain separately and transfers solution information between subdomains via Dirichlet boundary conditions. In this study, the framework is applied to model incipient localization in tensile specimens during necking.

User perspectives on relevance criteria

DEFF Research Database (Denmark)

Maglaughlin, Kelly L.; Sonnenwald, Diane H.

2002-01-01

, partially relevant, or not relevant to their information need; and explained their decisions in an interview. Analysis revealed 29 criteria, discussed positively and negatively, that were used by the participants when selecting passages that contributed or detracted from a document's relevance......This study investigates the use of criteria to assess relevant, partially relevant, and not-relevant documents. Study participants identified passages within 20 document representations that they used to make relevance judgments; judged each document representation as a whole to be relevant...... matter, thought catalyst), full text (e.g., audience, novelty, type, possible content, utility), journal/publisher (e.g., novelty, main focus, perceived quality), and personal (e.g., competition, time requirements). Results further indicate that multiple criteria are used when making relevant, partially...

Numerical generation and study of synthetic bainitic microstructures

International Nuclear Information System (INIS)

Osipov, N.; Gourgues-Lorenzon, A.F.; Cailletaud, G.; Diard, O.; Marini, B.

2006-01-01

Models classically used to describe the probability of brittle fracture in nuclear power plants are written on the macroscopic scale. Its is not easy to surely capture the physical phenomena in such a type of approach, so that the application of the models far from their identification domain (temperature history, loading path) may become questionable. To improve the quality of the prediction of resistance and life time, microstructural information, describing the heterogeneous character of the material and its deformation mechanisms has to be taken into consideration. This paper is devoted to 16MND5 bainitic steel. Bainitic packets grow in former austenitic grains, and are not randomly oriented. Knowing the macroscopic stress is thus not sufficient to describe the stress-strain state in ferrite. An accurate model must take into account the actual microstructure, in order to provide realistic local stress and strain fields, to be used as inputs of a new class of cleavage models based on the local behavior. The paper shows the approach used to generate a synthetic microstructure and demonstrates that the resulting morphologies present a quantitative agreement with the experimental images. (authors)

Age-related changes in trabecular and cortical bone microstructure.

Science.gov (United States)

Chen, Huayue; Zhou, Xiangrong; Fujita, Hiroshi; Onozuka, Minoru; Kubo, Kin-Ya

2013-01-01

The elderly population has substantially increased worldwide. Aging is a complex process, and the effects of aging are myriad and insidious, leading to progressive deterioration of various organs, including the skeleton. Age-related bone loss and resultant osteoporosis in the elderly population increase the risk for fractures and morbidity. Osteoporosis is one of the most common conditions associated with aging, and age is an independent risk factor for osteoporotic fractures. With the development of noninvasive imaging techniques such as computed tomography (CT), micro-CT, and high resolution peripheral quantitative CT (HR-pQCT), imaging of the bone architecture provides important information about age-related changes in bone microstructure and estimates of bone strength. In the past two decades, studies of human specimens using imaging techniques have revealed decreased bone strength in older adults compared with younger adults. The present paper addresses recently studied age-related changes in trabecular and cortical bone microstructure based primarily on HR-pQCT and micro-CT. We specifically focus on the three-dimensional microstructure of the vertebrae, femoral neck, and distal radius, which are common osteoporotic fracture sites.

Does Guiding Toward Task-Relevant Information Help Improve Graph Processing and Graph Comprehension of Individuals with Low or High Numeracy? An Eye-Tracker Experiment.

Science.gov (United States)

Keller, Carmen; Junghans, Alex

2017-11-01

Individuals with low numeracy have difficulties with understanding complex graphs. Combining the information-processing approach to numeracy with graph comprehension and information-reduction theories, we examined whether high numerates' better comprehension might be explained by their closer attention to task-relevant graphical elements, from which they would expect numerical information to understand the graph. Furthermore, we investigated whether participants could be trained in improving their attention to task-relevant information and graph comprehension. In an eye-tracker experiment ( N = 110) involving a sample from the general population, we presented participants with 2 hypothetical scenarios (stomach cancer, leukemia) showing survival curves for 2 treatments. In the training condition, participants received written instructions on how to read the graph. In the control condition, participants received another text. We tracked participants' eye movements while they answered 9 knowledge questions. The sum constituted graph comprehension. We analyzed visual attention to task-relevant graphical elements by using relative fixation durations and relative fixation counts. The mediation analysis revealed a significant ( P attention to task-relevant information, which did not differ between the 2 conditions. Training had a significant main effect on visual attention ( P attention to task-relevant graphical elements than individuals with low numeracy. With appropriate instructions, both groups can be trained to improve their graph-processing efficiency. Future research should examine (e.g., motivational) mediators between visual attention and graph comprehension to develop appropriate instructions that also result in higher graph comprehension.

Quantitatively differentiating microstructural variations of skeletal muscle tissues by multispectral Mueller matrix imaging

Science.gov (United States)

Dong, Yang; He, Honghui; He, Chao; Ma, Hui

2016-10-01

Polarized light is sensitive to the microstructures of biological tissues and can be used to detect physiological changes. Meanwhile, spectral features of the scattered light can also provide abundant microstructural information of tissues. In this paper, we take the backscattering polarization Mueller matrix images of bovine skeletal muscle tissues during the 24-hour experimental time, and analyze their multispectral behavior using quantitative Mueller matrix parameters. In the processes of rigor mortis and proteolysis of muscle samples, multispectral frequency distribution histograms (FDHs) of the Mueller matrix elements can reveal rich qualitative structural information. In addition, we analyze the temporal variations of the sample using the multispectral Mueller matrix transformation (MMT) parameters. The experimental results indicate that the different stages of rigor mortis and proteolysis for bovine skeletal muscle samples can be judged by these MMT parameters. The results presented in this work show that combining with the multispectral technique, the FDHs and MMT parameters can characterize the microstructural variation features of skeletal muscle tissues. The techniques have the potential to be used as tools for quantitative assessment of meat qualities in food industry.

Automated selection of relevant information for notification of incident cancer cases within a multisource cancer registry.

Science.gov (United States)

Jouhet, V; Defossez, G; Ingrand, P

2013-01-01

The aim of this study was to develop and evaluate a selection algorithm of relevant records for the notification of incident cases of cancer on the basis of the individual data available in a multi-source information system. This work was conducted on data for the year 2008 in the general cancer registry of Poitou-Charentes region (France). The selection algorithm hierarchizes information according to its level of relevance for tumoral topography and tumoral morphology independently. The selected data are combined to form composite records. These records are then grouped in respect with the notification rules of the International Agency for Research on Cancer for multiple primary cancers. The evaluation, based on recall, precision and F-measure confronted cases validated manually by the registry's physicians with tumours notified with and without records selection. The analysis involved 12,346 tumours validated among 11,971 individuals. The data used were hospital discharge data (104,474 records), pathology data (21,851 records), healthcare insurance data (7508 records) and cancer care centre's data (686 records). The selection algorithm permitted performances improvement for notification of tumour topography (F-measure 0.926 with vs. 0.857 without selection) and tumour morphology (F-measure 0.805 with vs. 0.750 without selection). These results show that selection of information according to its origin is efficient in reducing noise generated by imprecise coding. Further research is needed for solving the semantic problems relating to the integration of heterogeneous data and the use of non-structured information.

Modelling microstructural evolution under irradiation

International Nuclear Information System (INIS)

Tikare, V.

2015-01-01

Microstructural evolution of materials under irradiation is characterised by some unique features that are not typically present in other application environments. While much understanding has been achieved by experimental studies, the ability to model this microstructural evolution for complex materials states and environmental conditions not only enhances understanding, it also enables prediction of materials behaviour under conditions that are difficult to duplicate experimentally. Furthermore, reliable models enable designing materials for improved engineering performance for their respective applications. Thus, development and application of mesoscale microstructural model are important for advancing nuclear materials technologies. In this chapter, the application of the Potts model to nuclear materials will be reviewed and demonstrated, as an example of microstructural evolution processes. (author)

The layered-resolved microstructure and spectroscopy of mouse oral mucosa using multiphoton microscopy

Energy Technology Data Exchange (ETDEWEB)

Zhuo Shuangmu [Key Laboratory of Optoelectronic Science and Technology for Medicine, Fujian Normal University, Ministry of Education, Fuzhou 350007 (China); Chen Jianxin [Key Laboratory of Optoelectronic Science and Technology for Medicine, Fujian Normal University, Ministry of Education, Fuzhou 350007 (China); Jiang Xingshan [Key Laboratory of Optoelectronic Science and Technology for Medicine, Fujian Normal University, Ministry of Education, Fuzhou 350007 (China); Xie Shusen [Key Laboratory of Optoelectronic Science and Technology for Medicine, Fujian Normal University, Ministry of Education, Fuzhou 350007 (China); Chen Rong [Key Laboratory of Optoelectronic Science and Technology for Medicine, Fujian Normal University, Ministry of Education, Fuzhou 350007 (China); Cao Ning [Fujian Medical University, Fuzhou 350004 (China); Zou Qilian [Fujian Medical University, Fuzhou 350004 (China); Xiong Shuyuan [Fujian Medical University, Fuzhou 350004 (China)

2007-08-21

The layered-resolved microstructure and spectroscopy of mouse oral mucosa are obtained using a combination of multiphoton imaging and spectral analysis with different excitation wavelengths. In the keratinizing layer, the keratinocytes microstructure can be characterized and the keratinizing thickness can be measured. The keratin fluorescence signal can be further characterized by emission maxima at 510 nm. In the epithelium, the cellular microstructure can be quantitatively visualized with depth and the epithelium thickness can be determined by multiphoton imaging excited at 730 nm. The study also shows that the epithelial spectra excited at 810 nm, showing a combination of NADH and FAD fluorescence, can be used for the estimation of the metabolic state in epithelium. Interestingly, a second-harmonic generation (SHG) signal from DNA was observed for the first time within the epithelial layer in backscattering geometry and provides the possibility of analyzing the chromatin structure. In the stroma, the combination of multiphoton imaging and spectral analysis excited at 850 nm in tandem can obtain quantitative information regarding the biomorphology and biochemistry of stroma. Specifically, the microstructure of collagen, minor salivary glands and elastic fibers, and the optical property of the stroma can be quantitatively displayed. Overall, these results suggest that the combination of multiphoton imaging and spectral analysis with different excitation wavelengths has the potential to provide important and comprehensive information for early diagnosis of oral cancer.

Characterisation of weldment hardness, impact energy and microstructure in API X65 steel

International Nuclear Information System (INIS)

Hashemi, S.H.; Mohammadyani, D.

2012-01-01

The variation of microstructure and mechanical properties in various sub-zones of double submerged arc welded line pipe steel of grade API X65 was investigated. Instrumented Charpy V-notch tests and Vickers hardness experiments were conducted on the fusion zone, base metal and heat affected zone of the weld joint in 14.3 mm thick, 1219 mm outside diameter spiral pipeline. The lowest impact energy and the highest hardness level (160J and 218 HV, respectively) were recorded in the fusion zone. The low energy and high hardness characteristics of the seam weld can be attributed to its cast microstructure and the presence of grain boundary phases (such as proeutectoid ferrite), confirmed by standard metallographic observation. Despite this, service requirements set by the API 5L industry code (minimum impact energy of 73J, maximum hard spots of 350 HV) were fulfilled by the tested steel. Highlights: ► Experimental study of API X65 steel microstructure. ► Analysis of the relationship between X65 steel microstructure and hardness. ► Analysis of the relationship between X65 steel microstructure and impact energy. ► Presentation of detailed technical information on DSA welding in spiral pipes.

Microstructural descriptors and cellular automata simulation of the effects of non-random nuclei location on recrystallization in two dimensions

Directory of Open Access Journals (Sweden)

Paulo Rangel Rios

2006-06-01

Full Text Available The effect of non-random nuclei location and the efficiency of microstructural descriptors in assessing such a situation are studied. Cellular automata simulation of recrystallization in two dimensions is carried out to simulate microstrutural evolution for nuclei distribution ranging from a periodic arrangement to clusters of nuclei. The simulation results are compared in detail with microstrutural descriptors normally used to follow transformation evolution. It is shown that the contiguity is particularly relevant to detect microstructural deviations from randomness. This work focuses on recrystallization but its results are applicable to any nucleation and growth transformation.

The Criteria People Use in Relevance Decisions on Health Information: An Analysis of User Eye Movements When Browsing a Health Discussion Forum.

Science.gov (United States)

Pian, Wenjing; Khoo, Christopher Sg; Chang, Yun-Ke

2016-06-20

People are increasingly accessing health-related social media sites, such as health discussion forums, to post and read user-generated health information. It is important to know what criteria people use when deciding the relevance of information found on health social media websites, in different situations. The study attempted to identify the relevance criteria that people use when browsing a health discussion forum, in 3 types of use contexts: when seeking information for their own health issue, when seeking for other people's health issue, and when browsing without a particular health issue in mind. A total of 58 study participants were self-assigned to 1 of the 3 use contexts or information needs and were asked to browse a health discussion forum, HealthBoards.com. In the analysis, browsing a discussion forum was divided into 2 stages: scanning a set of post surrogates (mainly post titles) in the summary result screen and reading a detailed post content (including comments by other users). An eye tracker system was used to capture participants' eye movement behavior and the text they skim over and focus (ie, fixate) on during browsing. By analyzing the text that people's eyes fixated on, the types of health information used in the relevance judgment were determined. Post-experiment interviews elicited participants' comments on the relevance of the information and criteria used. It was found that participants seeking health information for their own health issue focused significantly more on the poster's symptoms, personal history of the disease, and description of the disease (P=.01, .001, and .02). Participants seeking for other people's health issue focused significantly more on cause of disease, disease terminology, and description of treatments and procedures (P=.01, .01, and .02). In contrast, participants browsing with no particular issue in mind focused significantly more on general health topics, hot topics, and rare health issues (P=.01, .01, and .01

The Criteria People Use in Relevance Decisions on Health Information: An Analysis of User Eye Movements When Browsing a Health Discussion Forum

Science.gov (United States)

Khoo, Christopher SG; Chang, Yun-Ke

2016-01-01

Background People are increasingly accessing health-related social media sites, such as health discussion forums, to post and read user-generated health information. It is important to know what criteria people use when deciding the relevance of information found on health social media websites, in different situations. Objective The study attempted to identify the relevance criteria that people use when browsing a health discussion forum, in 3 types of use contexts: when seeking information for their own health issue, when seeking for other people’s health issue, and when browsing without a particular health issue in mind. Methods A total of 58 study participants were self-assigned to 1 of the 3 use contexts or information needs and were asked to browse a health discussion forum, HealthBoards.com. In the analysis, browsing a discussion forum was divided into 2 stages: scanning a set of post surrogates (mainly post titles) in the summary result screen and reading a detailed post content (including comments by other users). An eye tracker system was used to capture participants’ eye movement behavior and the text they skim over and focus (ie, fixate) on during browsing. By analyzing the text that people’s eyes fixated on, the types of health information used in the relevance judgment were determined. Post-experiment interviews elicited participants’ comments on the relevance of the information and criteria used. Results It was found that participants seeking health information for their own health issue focused significantly more on the poster’s symptoms, personal history of the disease, and description of the disease (P=.01, .001, and .02). Participants seeking for other people’s health issue focused significantly more on cause of disease, disease terminology, and description of treatments and procedures (P=.01, .01, and .02). In contrast, participants browsing with no particular issue in mind focused significantly more on general health topics, hot

Correlation between microstructural features and mechanical properties of irradiated LONGLIFE RPV steels

International Nuclear Information System (INIS)

Serrano, M.; Hermandez-Mayoral, E.; Bergner, F.; Viehrig, H.W.; Altstadt, E.; Radiguet, B.; Lim, J.H.; Grovenor, C.R.M.; Meslin, E.; Van Renterghem, W.; Chaouadi, R.; Ortner, S.; Hein, H.; Gillemot, F.; Todeschini, P.; Planman, T.; Wilford, K.; Kocik, J.; Brumovsky, M.; Ruoden, J.

2015-01-01

The possibility of extending the operational life of reactor pressure vessels (RPV) up to 80 years presents the problem of the availability of materials irradiated at high neutron fluence and low neutron flux. The ability of the existing trend curves to predict high fluence embrittlement is a question of debate, and a critical analysis of these curves should be based on a consistent microstructural examination of irradiated materials. Within the LONGLIFE 7FWP, neutron irradiated RPV materials, relevant for long term operation, some of them coming from surveillance programs, have been characterized by means of a combination of microstructural techniques (APT, SANS, TEM) and mechanical tests (hardness, tensile, impact and fracture toughness). In this paper the analysis of the links between microstructural features (solute nano-clusters, dislocation loops and voids) and hardening and embrittlement measurements by mechanical testing, is presented. Current hardening models, based on the contribution of precipitates, or nano-clusters, seem to underestimate irradiation hardening for very high fluences, mainly when matrix damage (dislocation loops) is observed. Regarding chemical composition effects, the predominant role of Ni and the synergism between Ni-Mn and Si are also identified. Low-Cu alloys show a threshold value of radiation induced features to produce an effect on mechanical properties which calls for further in-depth analyses. (authors)

The concept of a 'microstructural fingerprint' for the characterization of samples in nuclear forensic science

International Nuclear Information System (INIS)

Ray, I.L.F.; Schubert, A.; Wallenius, M.

2002-01-01

In the examination of unknown specimens of nuclear materials the primary parameter of importance is the 'Isotopic Fingerprint' of the sample, mainly the ratios of the different isotopes of U and Pu which are present. In some cases, however, where no clear isotopic signature is found, or where there is a mixture of materials present, the isotopic fingerprint alone is not sufficient for a unique identification to be made. In this paper the concept of a 'Microstructural Fingerprint' of a sample is proposed and developed, which is complementary to the 'Isotopic Fingerprint' for the characterisation of materials which are under investigation in the field of nuclear forensic science. The proposal combines the techniques of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Analysis (EDX), to define the microstructure of a suspect sample, a combination of techniques which has not been used before in nuclear forensic science. The microstructural information is particularly important in the case of powder samples, for the following reasons: 1) An essential prerequisite to an isotopic analysis, for example by Thermal Ionisation Mass Spectrometry (TIMS), is the information whether a powder sample consists of a single component, or is a mixture of several distinct components. If the material is multicomponent it must be separated and the individual components analysed separately. 2) Powder samples mainly represent precursor stages in the nuclear fuel cycle, and the microstructural analysis gives information on the production process and conditions (for example, the grain size in PuO 2 platelets produced by the calcination of oxalate precipitate, and the size and thickness distributions of the platelets themselves). 3) Powder samples can be mixed with other compounds with the deliberate intention of confusing the chemical or isotopic analysis of suspect materials. However the microstructural fingerprint of a component cannot

Image analysis: a tool characterising and modelling the microstructure of the MOX fuel

International Nuclear Information System (INIS)

Charollais, F.

1997-01-01

The MOX nuclear fuel, made up of about 3 to 10 % of plutonium oxide mixed with uranium oxide, is elaborated by an original manufacturing method (MIMAS process). The MOX pellets feature a singular and complex microstructure, including enriched plutonium zones dispersed in a low plutonium content matrix. Their properties as well as their performances levels are strongly linked with this microstructure. Tools, found in the literature, allowing to quantify with relevant parameters the microstructural images from different analytical equipment (optical microscopy, electron probe micro-analyser and autoradiography) have been adapted and used in order to characterize these nuclear fuels. Taking into account the heterogeneity of the MOX microstructure, we turn our's attention, at the beginning of this study, to the analysis conditions: choice of the magnification, sampling and statistical analysis of the measurements. An improvement of the ceramographic preparation of the samples, required for an automatic image analysis (of the granular structure), has been realised by thermal etching under oxidizing gas. This method enables the strong content plutonium zones to be revealed distinctly. The first part of the study concerns the characterization of the three-dimensional structure of uranium oxide and MOX fuels by average variables using the principles of mathematical morphology and stereology. The second part introduces probabilistic models, in particular the Boolean scheme, in order to improve and complete the three-dimensional characterization of the MOX fuel and more specifically the enriched plutonium islands dispersion in the pellet. [fr

FOREWORD: Heterogenous nucleation and microstructure formation—a scale- and system-bridging approach Heterogenous nucleation and microstructure formation—a scale- and system-bridging approach

Science.gov (United States)

Emmerich, H.

2009-11-01

Scope and aim of this volume. Nucleation and initial microstructure formation play an important role in almost all aspects of materials science [1-5]. The relevance of the prediction and control of nucleation and the subsequent microstructure formation is fully accepted across many areas of modern surface and materials science and technology. One reason is that a large range of material properties, from mechanical ones such as ductility and hardness to electrical and magnetic ones such as electric conductivity and magnetic hardness, depend largely on the specific crystalline structure that forms in nucleation and the subsequent initial microstructure growth. A very demonstrative example for the latter is the so called bamboo structure of an integrated circuit, for which resistance against electromigration [6] , a parallel alignment of grain boundaries vertical to the direction of electricity, is most favorable. Despite the large relevance of predicting and controlling nucleation and the subsequent microstructure formation, and despite significant progress in the experimental analysis of the later stages of crystal growth in line with new theoretical computer simulation concepts [7], details about the initial stages of solidification are still far from being satisfactorily understood. This is in particular true when the nucleation event occurs as heterogenous nucleation. The Priority Program SPP 1296 'Heterogenous Nucleation and Microstructure Formation—a Scale- and System-Bridging Approach' [8] sponsored by the German Research Foundation, DFG, intends to contribute to this open issue via a six year research program that enables approximately twenty research groups in Germany to work interdisciplinarily together following this goal. Moreover, it enables the participants to embed themselves in the international community which focuses on this issue via internationally open joint workshops, conferences and summer schools. An outline of such activities can be found

Microstructured metal molds fabricated via investment casting

International Nuclear Information System (INIS)

Cannon, Andrew H; King, William P

2010-01-01

This paper describes an investment casting process to produce aluminum molds having integrated microstructures. Unlike conventional micromolding tools, the aluminum mold was large and had complex curved surfaces. The aluminum was cast from curved microstructured ceramic molds which were themselves cast from curved microstructured rubber. The aluminum microstructures had an aspect ratio of 1:1 and sizes ranging from 25 to 50 µm. Many structures were successfully cast into the aluminum with excellent replication fidelity, including circular, square and triangular holes. We demonstrate molding of large, curved surfaces having surface microstructures using the aluminum mold.

Microstructure characterization of ceramic nuclear fuel

International Nuclear Information System (INIS)

Boehmert, J.; Gaessner, W.

1984-08-01

A system of characterizing methods is described based on quantitative ceramographic methods. This system is applicable in quality assurance of UO 2 nuclear fuel in small-scale production and for determining microstructural parameters in scientific investigations. The system is based essentially on the measuring of microstructural parameters by the methods of linear analysis by the VEB Carl Zeiss Jena EPIQUANT mechanical optical microstructural analyzer. It is completed by measuring the pore size using automatic the television analyzer QTM. Before the quantitative microstructural characterization, in each case the morphology of the structure is estimated qualitatively. (author)

Microstructural effects on constitutive and fatigue fracture behavior of TinSilverCopper solder

Science.gov (United States)

Tucker, Jonathon P.

As microelectronic package construction becomes more diverse and complex, the need for accurate, geometry-independent material constitutive and failure models increases. Evaluations of packages based on accelerated environmental tests (such as accelerated thermal cycling or power cycling) only provide package-dependent reliability information. In addition, extrapolations of such test data to life predictions under field conditions are often empirical. Besides geometry, accelerated environmental test data must account for microstructural factors such as alloy composition or isothermal aging condition, resulting in expensive experimental variation. In this work, displacement-controlled, creep, and fatigue lap shear tests are conducted on specially designed SnAgCu test specimens with microstructures representative to those found in commercial microelectronic packages. The data are used to develop constitutive and fatigue fracture material models capable of describing deformation and fracture behavior for the relevant temperature and strain rate ranges. Furthermore, insight is provided into the microstructural variation of solder joints and the subsequent effect on material behavior. These models are appropriate for application to packages of any geometrical construction. The first focus of the thesis is on Pb-mixed SnAgCu solder alloys. During the transition from Pb-containing solders to Pb-free solders, joints composed of a mixture of SnPb and SnAgCu often result from either mixed assemblies or rework. Three alloys of 1, 5 and 20 weight percent Pb were selected so as to represent reasonable ranges of Pb contamination expected from different 63Sn37Pb components mixed with Sn3.0Ag0.5Cu. Displacement-controlled (constant strain rate) and creep tests were performed at temperatures of 25°C, 75°C, and 125°C using a double lap shear test setup that ensures a nearly homogeneous state of plastic strain at the joint interface. Rate-dependent constitutive models for Pb

Types of Lexicographical Information Needs and their Relevance for Information Science

OpenAIRE

Bergenholtz, Henning; Agerbo, Heidi

2017-01-01

In some situations, you need information in order to solve a problem that has occurred. In information science, user needs are often described through very specific examples rather than through a classification of situation types in which information needs occur. Furthermore, information science often describes general human needs, typically with a reference to Maslow's classification of needs (1954), instead of actual information needs. Lexicography has also focused on information needs, but...

The roles of texture and microstructure for seismic properties and anisotropy of the continental crust

Science.gov (United States)

Almqvist, B. S. G.; Mainprice, D.

2017-12-01

New seismic methods provide images of the continental crust with improved resolution, carrying unique information on the structure and mass transfer regimes within the crust. At the intrinsic scale components contributing to these images are grains and the microfabric, which includes information on grain characteristics. At the extrinsic scale the presence of micro-cracks, fractures and layering are important in controlling seismic velocities. Although the wavelength of a seismic wave is orders of magnitude larger than the intrinsic scale the minerals and microstructures, the interpretations of seismic images are critically dependent on our understanding and quantification of these microscopic constituents. This contribution explores the role of texture and microstructure in governing seismic properties of rocks. We focus on prediction of seismic velocities based on calculations that take into account mineral composition and microfabric of rocks. Emphasis is placed on recent developments in modeling efforts and analytical techniques, which can consider microfabric parameters such as crystallographic preferred orientation (CPO), grain shape, layering and elastic interaction among grains. Static schemes that use Christoffel's equation, and active/dynamic wave propagation methods provide the general techniques to predict seismic velocities. Single crystal elastic constants are essential in predicting seismic properties. However, the database is incomplete considering the variation of crustal mineralogy and lack of data at elevated pressure and temperature conditions occurring in the middle and lower crust. Finally, the method used to measure CPO and microstructure data has an influence on model predictions. Neutron and X-ray goniometry techniques enable investigation of CPO for large sample volumes, but lack other microstructural information. In contrast, electron backscatter diffraction provides data on both CPO and microstructure, but for a relatively small sample

Thermal and microstructural modelling in weld heat-affected zones: microstructural development

International Nuclear Information System (INIS)

Ribera, J.M.; Prado, J.M.

1996-01-01

After having analysed in Part 2 of this work the thermal effects caused by a welding process, a metallurgical model which uses those results is proposed to predict the hardness and the microstructure resulting in weld heat affected zones. This model simulates the decomposition of austenite to its various products: martensite, bainite, pearlite and ferrite. Thus, it allows one to optimize welding process parameters to achieve the best microstructure possible. (Author) 5 refs

Microstructure Modeling of 3rd Generation Disk Alloy

Science.gov (United States)

Jou, Herng-Jeng

2008-01-01

The objective of this initiative, funded by NASA's Aviation Safety Program, is to model, validate, and predict, with high fidelity, the microstructural evolution of third-generation high-refractory Ni-based disc superalloys during heat treating and service conditions. This initiative is a natural extension of the DARPA-AIM (Accelerated Insertion of Materials) initiative with GE/Pratt-Whitney and with other process simulation tools. Strong collaboration with the NASA Glenn Research Center (GRC) is a key component of this initiative and the focus of this program is on industrially relevant disk alloys and heat treatment processes identified by GRC. Employing QuesTek s Computational Materials Dynamics technology and PrecipiCalc precipitation simulator, physics-based models are being used to achieve high predictive accuracy and precision. Combining these models with experimental data and probabilistic analysis, "virtual alloy design" can be performed. The predicted microstructures can be optimized to promote desirable features and concurrently eliminate nondesirable phases that can limit the reliability and durability of the alloys. The well-calibrated and well-integrated software tools that are being applied under the proposed program will help gas turbine disk alloy manufacturers, processing facilities, and NASA, to efficiently and effectively improve the performance of current and future disk materials.

Semiconductors and semimetals epitaxial microstructures

CERN Document Server

Willardson, Robert K; Beer, Albert C; Gossard, Arthur C

1994-01-01

Newly developed semiconductor microstructures can now guide light and electrons resulting in important consequences for state-of-the-art electronic and photonic devices. This volume introduces a new generation of epitaxial microstructures. Special emphasis has been given to atomic control during growth and the interrelationship between the atomic arrangements and the properties of the structures.Key Features* Atomic-level control of semiconductor microstructures* Molecular beam epitaxy, metal-organic chemical vapor deposition* Quantum wells and quantum wires* Lasers, photon(IR)detectors, heterostructure transistors

Experimental microstructures MOX fuels elaboration

International Nuclear Information System (INIS)

Gotta, M.J.; Dubois, S.; Lechelle, J.; Sornay, P.

2000-01-01

In order to propose a new MOX fuel, owning higher combustion rate, studies are realized at the CEA in collaboration with Cogema, EDF and Framatome. New microstructures of MOX are looked for around two approaches: the grains size and the plutonium distribution. These approaches are presented and discussed in this paper. The first one develops big grains microstructures obtained, either with anionic (sulfur), or cationic (Cr 2 O 3 ) additives. The second one concerns the CER-CER type composite microstructures. (A.L.B.)

Microstructure and critical current of superconducting YBa/sub 2/Cu/sub 3/Osub(7-x)

Energy Technology Data Exchange (ETDEWEB)

Camps, R A; Evetts, J E; Glowacki, B A; Newcomb, S B; Somekh, R E; Stobbs, W M

1987-09-17

The authors present the main results of a detailed electron microscopical study of sintered YBa/sub 2/Cu/sub 3/0sub(7-x), and discuss their relevance to observed critical current and its modification by increased silicon impurity levels. In the light of these results, the prospects are assessed for controlling microstructure development so as to optimize the critical current for technological application.

Inhomogeneous microstructural growth by irradiation

DEFF Research Database (Denmark)

Krishan, K.; Singh, Bachu Narain; Leffers, Torben

1985-01-01

In the present paper we discuss the development of heterogeneous microstructure for uniform irradiation conditions. It is shown that microstructural inhomogeneities on a scale of 0.1 μm can develop purely from kinematic considerations because of the basic structure of the rate equations used...... to describe such evolution. Two aspects of the growth of such inhomogeneities are discussed. Firstly, it is shown that a local variation in the sink densities of the various microstructural defects will tend to enhance the inhomogeneity rather than remove it. Secondly, such inhomogeneities will lead to point...... defect fluxes that result in a spatial growth of the inhomogeneous region, which will be stopped only when the microstructural density around this region becomes large. The results have important implications in the formation of denuded zones and void formation in metals....

Relationships between acoustic emissions and microstructures

International Nuclear Information System (INIS)

Rao, G.V.; Gopal, R.

1979-01-01

Results of a systematic study of 'microstructure-deformation-acoustic emission' relationships on two widely used pressure retaining component materials, namely A533-B nuclear pressure vessel steel and a 7075 aluminum alloy, are presented. The study consists of conducting acoustic monitored tensile tests on a variety of quenched and aged microstructures in the two alloy systems and extensive microstructural characterization of test specimens by light optic and electron microscopy techniques. The results suggest a consistent relationship between acoustic emissions and microdeformation mechanisms. The role of specific microstructural constituents in generating acoustic emissions in the two alloys is discussed. (author)

Protection of safety-relevant information in distributed energy information systems; Schutz sicherheitsrelevanter Informationen in verteilten Energieinformationssystemen

Energy Technology Data Exchange (ETDEWEB)

Beenken, Petra

2010-07-01

Within the last years there has been an ongoing change in the energy domain. The German renewable energies law EnWG requires a liberalization that leads to a strict separation of domains such as transportation, supply and conversion of energy. Furthermore, climate and environmental protection as well as cost transparency and energy saving in combination with efficiency of resources leads to new challenges for the energy industry. The so called smart grid vision and the concluding design of an ICT-based information structure for the energy domain will help to reach these goals by integrating renewable energy resources, saving fuels and getting a higher energy efficiency. In order to reach these goals, information about current energy generation, energy storage and energy demand is required. Through an efficient network and fast information exchange by means of an energy information network an efficient energy use can be gained. The federated networking of an energy information network like this can tend to a weakness for cyber security within the energy domain. The growing number of people involved and data exchanges will create more potential points of attacks than before. Therefore, a suitable protection of an energy information network is necessary. Through paragraph 9 EnWG the protection goal confidentiality is particularly important. But the implementation of confidentiality must not lead to a violation of availability requirements, which are very important at some point of the energy domain. Additionally to the identification of such crucial side effects, the implementation of confidentiality for distributed, decentral systems is a challenge for the domain. The ENERTRUST security model includes a knowledge base construction, which allows the identification of such side effects or conflicts in the energy domain by applying reasoning techniques. Moreover, it allows the realization of confidentiality from distributed locations through a use and combination of

Autonomous patterning of cells on microstructured fine particles

International Nuclear Information System (INIS)

Takeda, Iwori; Kawanabe, Masato; Kaneko, Arata

2015-01-01

Regularly patterned cells can clarify cellular function and are required in some biochip applications. This study examines cell patterning along microstructures and the effect of microstructural geometry on selective cellular adhesion. Particles can be autonomously assembled on a soda-lime glass substrate that is chemically patterned by immersion in a suspension of fine particles. By adopting various sizes of fine particles, we can control the geometry of the microstructure. Cells adhere more readily to microstructured fine particles than to flat glass substrate. Silica particles hexagonally packed in 5–40 μm line and space microstructures provide an effective cell scaffold on the glass substrate. Cultured cells tend to attach and proliferate along the microstructured region while avoiding the flat region. The difference in cell adhesion is attributed to their geometries, as both of the silica particles and soda-lime glass are hydrophilic related with cell adhesiveness. After cell seeding, cells adhered to the flat region migrated toward the microstructured region. For most of the cells to assemble on the scaffold, the scaffolding microstructures must be spaced by at most 65 μm. - Highlights: • PS and SiO 2 particles provide effective scaffolds for cells. • Cells that adhere to microstructured particles successfully proliferate and differentiate. • Selective adhesion and growth along the scaffold can be achieved by patterning the fine particle microstructure. • Cells adhered to flat regions migrate toward microstructured regions. • Selective adhesion by cells depends on the microstructural geometry; specifically, on the inter-line spacing

Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation

International Nuclear Information System (INIS)

Gebhard, S.; Pyczak, F.; Goeken, M.

2009-01-01

Different microstructures were generated in the Ti-45Al-4.6Nb-0.2B-0.2C and Ti-45Al-1Cr alloys (at.%) by heat treatment. The microstructures were investigated using nanoindentation and atomic force microscopy which was compared with transmission electron microscopy. Topographic contrast is usually used for phase identification in the atomic force microscope. However, it was found that the topographic order of the phases changes with different microstructures and specimen preparations. Nanoindentation measurements provided local hardness values not obtainable by other methods and enabled clear distinction of the phases. The hardness values can give information on surrounding microstructure and solid solution hardening. The mean lamellar spacing of the colonies was measured using both atomic force microscopy and transmission electron microscopy. Atomic force microscopy was found to be suitable to determine the spacing between α 2 /γ-interfaces offering the advantages of easier sample preparation and fewer specimens compared to evaluation by TEM analysis.

Age-Related Changes in Trabecular and Cortical Bone Microstructure

Directory of Open Access Journals (Sweden)

Huayue Chen

2013-01-01

Full Text Available The elderly population has substantially increased worldwide. Aging is a complex process, and the effects of aging are myriad and insidious, leading to progressive deterioration of various organs, including the skeleton. Age-related bone loss and resultant osteoporosis in the elderly population increase the risk for fractures and morbidity. Osteoporosis is one of the most common conditions associated with aging, and age is an independent risk factor for osteoporotic fractures. With the development of noninvasive imaging techniques such as computed tomography (CT, micro-CT, and high resolution peripheral quantitative CT (HR-pQCT, imaging of the bone architecture provides important information about age-related changes in bone microstructure and estimates of bone strength. In the past two decades, studies of human specimens using imaging techniques have revealed decreased bone strength in older adults compared with younger adults. The present paper addresses recently studied age-related changes in trabecular and cortical bone microstructure based primarily on HR-pQCT and micro-CT. We specifically focus on the three-dimensional microstructure of the vertebrae, femoral neck, and distal radius, which are common osteoporotic fracture sites.

Microstructure Reconstruction of Sheet Molding Composite Using a Random Chips Packing Algorithm

Energy Technology Data Exchange (ETDEWEB)

Huang, Tianyu; Xu, Hongyi; Chen, Wei

2017-04-06

Fiber-reinforced polymer composites are strong candidates for structural materials to replace steel and light alloys in lightweight vehicle design because of their low density and relatively high strength. In the integrated computational materials engineering (ICME) development of carbon fiber composites, microstructure reconstruction algorithms are needed to generate material microstructure representative volume element (RVE) based on the material processing information. The microstructure RVE reconstruction enables the material property prediction by finite element analysis (FEA)This paper presents an algorithm to reconstruct the microstructure of a chopped carbon fiber/epoxy laminate material system produced by compression molding, normally known as sheet molding compounds (SMC). The algorithm takes the result from material’s manufacturing process as inputs, such as the orientation tensor of fibers, the chopped fiber sheet geometry, and the fiber volume fraction. The chopped fiber sheets are treated as deformable rectangle chips and a random packing algorithm is developed to pack these chips into a square plate. The RVE is built in a layer-by-layer fashion until the desired number of lamina is reached, then a fine tuning process is applied to finalize the reconstruction. Compared to the previous methods, this new approach has the ability to model bended fibers by allowing limited amount of overlaps of rectangle chips. Furthermore, the method does not need SMC microstructure images, for which the image-based characterization techniques have not been mature enough, as inputs. Case studies are performed and the results show that the statistics of the reconstructed microstructures generated by the algorithm matches well with the target input parameters from processing.

Fracture mechanics and microstructures

International Nuclear Information System (INIS)

Gee, M.G.; Morrell, R.

1986-01-01

The influence of microstructure on defects in ceramics, and the consequences of their presence for the application of fracture mechanics theories are reviewed. The complexities of microstructures, especially the multiphase nature, the crystallographic anisotropy and the resultant anisotropic physical properties, and the variation of microstructure and surface finish from point to point in real components, all lead to considerable uncertainties in the actual performance of any particular component. It is concluded that although the concepts of fracture mechanics have been and will continue to be most useful for the qualitative explanation of fracture phenomena, the usefulness as a predictive tool with respect to most existing types of material is limited by the interrelation between material microstructure and mechanical properties. At present, the only method of eliminating components with unsatisfactory mechanical properties is to proof-test them, despite the fact that proof-testing itself is limited in ability to cope with changes to the component in service. The aim of the manufacturer must be to improve quality and consistency within individual components, from component to component, and from batch to batch. The aim of the fracture specialist must be to study longer-term properties to improve the accuracy of behaviour predictions with a stronger data base. Materials development needs to concentrate on obtaining defect-free materials that can be translated into more-reliable products, using our present understanding of the influence of microstructure on strength and toughness

Use and perceptions of information among family physicians: sources considered accessible, relevant, and reliable.

Science.gov (United States)

Kosteniuk, Julie G; Morgan, Debra G; D'Arcy, Carl K

2013-01-01

The research determined (1) the information sources that family physicians (FPs) most commonly use to update their general medical knowledge and to make specific clinical decisions, and (2) the information sources FPs found to be most physically accessible, intellectually accessible (easy to understand), reliable (trustworthy), and relevant to their needs. A cross-sectional postal survey of 792 FPs and locum tenens, in full-time or part-time medical practice, currently practicing or on leave of absence in the Canadian province of Saskatchewan was conducted during the period of January to April 2008. Of 666 eligible physicians, 331 completed and returned surveys, resulting in a response rate of 49.7% (331/666). Medical textbooks and colleagues in the main patient care setting were the top 2 sources for the purpose of making specific clinical decisions. Medical textbooks were most frequently considered by FPs to be reliable (trustworthy), and colleagues in the main patient care setting were most physically accessible (easy to access). When making specific clinical decisions, FPs were most likely to use information from sources that they considered to be reliable and generally physically accessible, suggesting that FPs can best be supported by facilitating easy and convenient access to high-quality information.

Modeling Financial Time Series Based on a Market Microstructure Model with Leverage Effect

Directory of Open Access Journals (Sweden)

Yanhui Xi

2016-01-01

Full Text Available The basic market microstructure model specifies that the price/return innovation and the volatility innovation are independent Gaussian white noise processes. However, the financial leverage effect has been found to be statistically significant in many financial time series. In this paper, a novel market microstructure model with leverage effects is proposed. The model specification assumed a negative correlation in the errors between the price/return innovation and the volatility innovation. With the new representations, a theoretical explanation of leverage effect is provided. Simulated data and daily stock market indices (Shanghai composite index, Shenzhen component index, and Standard and Poor’s 500 Composite index via Bayesian Markov Chain Monte Carlo (MCMC method are used to estimate the leverage market microstructure model. The results verify the effectiveness of the model and its estimation approach proposed in the paper and also indicate that the stock markets have strong leverage effects. Compared with the classical leverage stochastic volatility (SV model in terms of DIC (Deviance Information Criterion, the leverage market microstructure model fits the data better.

75 FR 20843 - Notice of Workshop To Discuss Policy-Relevant Science to Inform EPA's Integrated Plan for the...

Science.gov (United States)

2010-04-21

... Policy-Relevant Science to Inform EPA's Integrated Plan for the Review of the Lead National Ambient Air.... Environmental Protection Agency (EPA) is announcing that a workshop entitled, ``Workshop to Discuss Policy... workshop will be open to attendance by interested public observers on a first-come, first-served basis up...

The Influence of Post-Build Microstructure on the Electrochemical Behavior of Additively Manufactured 17-4 PH Stainless Steel.

Science.gov (United States)

Stoudt, M R; Ricker, R E; Lass, E A; Levine, L E

2017-03-01

The additive manufacturing (AM) build process produces a segregated microstructure with significant variations in composition and phases that are uncommon in traditional wrought materials. As such, the relationship between the post-build microstructure and the corrosion resistance is not well understood. Stainless steel alloy 17-4PH is an industrially-relevant alloy for applications requiring high-strength and good corrosion resistance. A series of potentiodynamic scans conducted in a deaerated 0.5 mol/L NaCl solution evaluated the influence of these microstructural differences on the pitting behavior of SS17-4. The pitting potentials were found to be higher in the samples of additively-processed material than in samples of the alloy in wrought form. This indicates that the additively-processed material is more resistant to localized corrosion and pitting in this environment than the wrought alloy. The results also suggest that after homogenization, the additively-produced SS17-4 could be more resistant to pitting than wrought SS17-4 in an actual service environment.

Comparing the Influence of Title and URL in Information Retrieval Relevance in Search Engines Results between Human Science and Agriculture Science

Directory of Open Access Journals (Sweden)

Parisa Allami

2012-12-01

Full Text Available When the World Wide Web provides suitable methods for producing and publishing information to scientists, the Web has become a mediator to publishing information. This environment has been formed billions of web pages that each of them has a special title, special content, special address and special purpose. Search engines provide a variety of facilities limit search results to raise the possibility of relevance in the retrieval results. One of these facilities is the limitation of the keywords and search terms to the title or URL. It can increase the possibility of results relevance significantly. Search engines claim what are limited to title and URL is most relevant. This research tried to compare the results relevant between results limited in title and URL in agricultural and Humanities areas from their users sights also it notice to Comparison of the presence of keywords in the title and URL between two areas and the relationship between search query numbers and matching keywords in title and their URLs. For this purpose, the number of 30 students in each area whom were in MA process and in doing their thesis was chosen. There was a significant relevant of the results that they limited their information needs to title and URL. There was significantly relevance in URL results in agricultural area, but there was not any significant difference between title and URL results in the humanities. For comparing the number of keywords in title and URL in two areas, 30 keywords in each area were chosen. There was not any significantly difference between the number of keywords in the title and URL of websites in two areas. To show relationship between number of search keyword and the matching of title and URL 45 keywords in each area were chosen. They were divided to three parts (one keyword, two keywords and three keywords. It was determined that if search keyword was less, the amount of matching between title and URL was more and if the matching

Microstructures and mechanical properties of aging materials

International Nuclear Information System (INIS)

Liaw, P.K.; Viswanathan, R.; Murty, K.L.; Simonen, E.P.; Frear, D.

1993-01-01

This book contains a collection of papers presented at the symposium on ''Microstructures and Mechanical Properties of Aging Materials,'' that was held in Chicago, IL. November 2-5, 1992 in conjunction with the Fall Meeting of The Minerals, Metals and Materials Society (TMS). The subjects of interest in the symposium included: (1) mechanisms of microstructural degradation, (2) effects of microstructural degradation on mechanical behavior, (3) development of life prediction methodology for in-service structural and electronic components, (4) experimental techniques to monitor degradation of microstructures and mechanical properties, and (5) effects of environment on microstructural degradation and mechanical properties. Individual papers have been processed separately for inclusion in the appropriate data bases

Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling

International Nuclear Information System (INIS)

Stolyarov, V.V.; Zhu, Y.T.; Raab, G.I.; Zharikov, A.I.; Valiev, R.Z.

2004-01-01

Ultrafine-grained (UFG) Ti rods were produced via cold rolling UFG and coarse-grained (CG) Ti stocks. The initial UFG stock was produced via equal channel angular pressing. It was found that the initial UFG structure had beneficial influence on the mechanical properties of the cold-rolled Ti rods. Compared with Ti rods with initial CG microstructure, the Ti rods with the initial UFG microstructure have both higher strength and higher ductility after being cold rolled to varying strains. Transmission electron microscopy revealed that the Ti rods with the initial UFG microstructure had finer, more homogeneous microstructures after cold rolling. This study demonstrates the merit of UFG Ti processed by ECAP for further shaping and forming into structural components with superior mechanical properties

Microstructured hollow fibers for ultrafiltration

NARCIS (Netherlands)

Culfaz, Pmar Zeynep; Culfaz, P.Z.; Rolevink, Hendrikus H.M.; van Rijn, C.J.M.; Lammertink, Rob G.H.; Wessling, Matthias

2010-01-01

Hollow fiber ultrafiltration membranes with a corrugated outer microstructure were prepared from a PES/PVP blend. The effect of spinning parameters such as air gap, take-up speed, polymer dope viscosity and coagulation value on the microstructure and membrane characteristics was investigated. Fibers

Understanding to Hierarchical Microstructures of Crab (Chinese hairy) Shell as a Natural Architecture

Energy Technology Data Exchange (ETDEWEB)

Chuanqiang, Zhou [Testing Center, Yangzhou University, No. 48 Wenhui East Road, Yangzhou (China); Xiangxiang, Gong [Testing Center, Yangzhou University, No. 48 Wenhui East Road, Yangzhou (China); School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou (China); Jie, Han [School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou (China)

2016-03-07

This work was done to better understand the microstructures, composition and mechanical properties of Chinese hairy crab shell. For fully revealing its hierarchical microstructure, the crab shell was observed with electron microscope under different magnifications from different facets. XRD, EDS, FTIR and TGA techniques have been used to characterize the untreated and chemically-treated crab shells, which provided enough information to determine the species and relative content of components in this biomaterial. Combined the microstructures with constituents analysis, the structural principles of crab shell was detailedly realized from different structural levels beyond former reports. To explore the relationship between structure and function, the mechanical properties of shell have been measured through performing tensile tests. The contributions of organics and minerals in shell to the mechanical properties were also discussed by measuring the tensile strength of de-calcification samples treated with HCl solution.

Understanding to Hierarchical Microstructures of Crab (Chinese hairy) Shell as a Natural Architecture

International Nuclear Information System (INIS)

Chuanqiang, Zhou; Xiangxiang, Gong; Jie, Han

2016-01-01

This work was done to better understand the microstructures, composition and mechanical properties of Chinese hairy crab shell. For fully revealing its hierarchical microstructure, the crab shell was observed with electron microscope under different magnifications from different facets. XRD, EDS, FTIR and TGA techniques have been used to characterize the untreated and chemically-treated crab shells, which provided enough information to determine the species and relative content of components in this biomaterial. Combined the microstructures with constituents analysis, the structural principles of crab shell was detailedly realized from different structural levels beyond former reports. To explore the relationship between structure and function, the mechanical properties of shell have been measured through performing tensile tests. The contributions of organics and minerals in shell to the mechanical properties were also discussed by measuring the tensile strength of de-calcification samples treated with HCl solution

[Test Reviews in Child Psychology: Test Users Wish to Obtain Practical Information Relevant to their Respective Field of Work].

Science.gov (United States)

Renner, Gerolf; Irblich, Dieter

2016-11-01

Test Reviews in Child Psychology: Test Users Wish to Obtain Practical Information Relevant to their Respective Field of Work This study investigated to what extent diagnosticians use reviews of psychometric tests for children and adolescents, how they evaluate their quality, and what they expect concerning content. Test users (n = 323) from different areas of work (notably social pediatrics, early intervention, special education, speech and language therapy) rated test reviews as one of the most important sources of information. Readers of test reviews value practically oriented descriptions and evaluations of tests that are relevant to their respective field of work. They expect independent reviews that critically discuss opportunities and limits of the tests under scrutiny. The results show that authors of test reviews should not only have a background in test theory but should also be familiar with the practical application of tests in various settings.

Higher glucose levels associated with lower memory and reduced hippocampal microstructure.

Science.gov (United States)

Kerti, Lucia; Witte, A Veronica; Winkler, Angela; Grittner, Ulrike; Rujescu, Dan; Flöel, Agnes

2013-11-12

For this cross-sectional study, we aimed to elucidate whether higher glycosylated hemoglobin (HbA1c) and glucose levels exert a negative impact on memory performance and hippocampal volume and microstructure in a cohort of healthy, older, nondiabetic individuals without dementia. In 141 individuals (72 women, mean age 63.1 years ± 6.9 SD), memory was tested using the Rey Auditory Verbal Learning Test. Peripheral levels of fasting HbA1c, glucose, and insulin and 3-tesla MRI scans were acquired to assess hippocampal volume and microstructure, as indicated by gray matter barrier density. Linear regression and simple mediation models were calculated to examine associations among memory, glucose metabolism, and hippocampal parameters. Lower HbA1c and glucose levels were significantly associated with better scores in delayed recall, learning ability, and memory consolidation. In multiple regression models, HbA1c remained strongly associated with memory performance. Moreover, mediation analyses indicated that beneficial effects of lower HbA1c on memory are in part mediated by hippocampal volume and microstructure. Our results indicate that even in the absence of manifest type 2 diabetes mellitus or impaired glucose tolerance, chronically higher blood glucose levels exert a negative influence on cognition, possibly mediated by structural changes in learning-relevant brain areas. Therefore, strategies aimed at lowering glucose levels even in the normal range may beneficially influence cognition in the older population, a hypothesis to be examined in future interventional trials.

Culturally-Relevant Online Cancer Education Modules Empower Alaska's Community Health Aides/Practitioners to Disseminate Cancer Information and Reduce Cancer Risk.

Science.gov (United States)

Cueva, Katie; Revels, Laura; Cueva, Melany; Lanier, Anne P; Dignan, Mark; Viswanath, K; Fung, Teresa T; Geller, Alan C

2017-04-12

To address a desire for timely, medically accurate cancer education in rural Alaska, ten culturally relevant online learning modules were developed with, and for, Alaska's Community Health Aides/Practitioners (CHA/Ps). The project was guided by the framework of Community-Based Participatory Action Research, honored Indigenous Ways of Knowing, and was informed by Empowerment Theory. A total of 428 end-of-module evaluation surveys were completed by 89 unique Alaska CHA/Ps between January and December 2016. CHA/Ps shared that as a result of completing the modules, they were empowered to share cancer information with their patients, families, friends, and communities, as well as engage in cancer risk reduction behaviors such as eating healthier, getting cancer screenings, exercising more, and quitting tobacco. CHA/Ps also reported the modules were informative and respectful of their diverse cultures. These results from end-of-module evaluation surveys suggest that the collaboratively developed, culturally relevant, online cancer education modules have empowered CHA/Ps to reduce cancer risk and disseminate cancer information. "brought me to tears couple of times, and I think it will help in destroying the silence that surrounds cancer".

Effect of initial as-cast microstructure on semisolid microstructure of AZ91D alloy during the strain-induced melt activation process

International Nuclear Information System (INIS)

Wang, J.G.; Lin, H.Q.; Li, Y.Q.; Jiang, Q.C.

2008-01-01

The effects of different as-cast microstructures which were initially cast in graphite, metal, sand and firebrick moulds, respectively on the semisolid microstructure of AZ91D alloy, have been investigated during the strain-induced melt activation (SIMA) process. The experimental results showed that the moulds with high cooling capacity could produce the fine-grained as-cast microstructure in which the fine α-Mg dendrites were surrounded by a narrow layer of eutectic mixtures. After compressive deformation, in the fine-grained as-cast microstructure, the more systemic strain energy would be gradually accumulated and abundantly stored due to uniform inner crystal lattice distortion, so the recrystallization was easily induced by the stored strain energy at the elevated temperature. As a channel for the diffusion of atoms, the subgrain boundary along which Al element was enriched, foremost melted above the eutectic temperature and resulted in the separation of neighboring subgrains from primary dendrites. Therefore, the refining role of recrystallization on the microstructural evolution from dendrite to globular particles in morphology was easier to play in the fine-grained as-cast microstructure, which was advantageous for the production of fine-grained semisolid microstructure. Additionally, in the fine-grained as-cast microstructure, the melting fracture of narrow secondary dendritic arms was easy to occur in their roots, which also attributed to the production of fine globular grains in semisolid microstructure from primary dendrites. The finer dendrites in the initial as-cast alloy could evolve into the finer globular grains with relatively small grain size distribution range in the semisolid microstructure during partial remelting; therefore, the finer the dendrites in the initial as-cast microstructure, the better were the tensile properties of the evolved semisolid microstructure

Discriminating Yogurt Microstructure Using Diffuse Reflectance Images

DEFF Research Database (Denmark)

Skytte, Jacob Lercke; Møller, Flemming; Abildgaard, Otto Højager Attermann

2015-01-01

The protein microstructure of many dairy products is of great importance for the consumers’ experience when eating the product. However, studies concerning discrimination between protein microstructures are limited. This paper presents preliminary results for discriminating different yogurt...... microstructures using hyperspectral (500-900nm) diffuse reflectance images (DRIs) – a technique potentially well suited for inline process control. Comparisons are made to quantified measures of the yogurt microstructure observed through confocal scanning laser microscopy (CSLM). The output signal from both...... modalities is evaluated on a 24 factorial design covering four common production parameters, which significantly change the chemistry and the microstructure of the yogurt. It is found that the DRIs can be as discriminative as the CSLM images in certain cases, however the performance is highly governed...

Types of lexicographical information needs and their relevance for information science

DEFF Research Database (Denmark)

Bergenholtz, Henning; Pedersen, Heidi Agerbo

2017-01-01

often describes general human needs, typically with a reference to Maslow’s classification of needs (1954), instead of actual information needs. Lexicography has also focused on information needs, but has developed a more abstract classification of types of information needs, though (until more recent...

Effects of Niobium Microalloying on Microstructure and Properties of Hot-Dip Galvanized Sheet

Energy Technology Data Exchange (ETDEWEB)

Mohrbacher, Hardy [NiobelCon bvba, Brussels (Belgium)

2010-04-15

Niobium microalloying is effective in hot-rolled and cold-rolled steels by providing a fine-grained microstructure resulting in increased strength. To optimize the strengthening effect, alloy design and hot-rolling conditions have to be adapted. As a key issue the dissolution and precipitation characteristics of Nb are discussed in particular with regard to the run-out table conditions. It is then considered how the hot-rolled microstructure and the solute state of Nb interact with the hot-dip galvanizing cycle. The adjusted conditions allow controlling the morphology and distribution of phases in the cold-rolled annealed material. Additional precipitation hardening can be achieved as well. The derived options can be readily applied to produce conventional HSLA and IF high strength steels as well as to modem multiphase steels. It will be explained how important application properties such as strength, elongation, bendability, weldability and delayed cracking resistance can be influenced in a controlled and favorable way. Examples of practical relevance and experience are given.

The role of second phases for controlling microstructural evolution in polymineralic rocks: A review

DEFF Research Database (Denmark)

Herwegh, Marco; Linckens, Jolien; Ebert, Andreas

2011-01-01

We present a state-of-the-art review of the microstructural evolution in rocks under static and deformational conditions. First, the general concepts and processes are introduced using monomineralic aggregates. Then, they are expanded into the more complex context of polymineralic rocks...... with a dominant matrix phase. The first part of this contribution delivers information on sample strategies to quantify polymineralic microfabrics. Based on comparisons between microfabrics of monomineralic and polymineralic rocks, we use the common knowledge collected over the past decades for monomineralic......, and deformation mechanisms. We speculate on the effect of mineral reactions during the evolution of microstructures and rheology in polymineralic aggregates at different metamorphic conditions. At the end of the article, we demonstrate the great potential of grain-size evolution maps as microstructural tool...

A TEM Study on the Microstructure of Fine Flaky Graphite

DEFF Research Database (Denmark)

Moumeni, Elham; Tiedje, Niels Skat; Horsewell, Andy

In this investigation the microstructure of the graphite flakes in titanium alloyed cast iron is studied using electron microscopy techniques. Based on this information, growth models for the platelets in the fine graphite flakes in cast iron are considered. Detailed crystallographic analysis...... of the defects observed such as multiple twin boundaries and possible spiral growth configurations are required...

Distribution of unresolvable anisotropic microstructures revealed in visibility-contrast images using x-ray Talbot interferometry

International Nuclear Information System (INIS)

Yashiro, Wataru; Harasse, Sebastien; Kawabata, Katsuyuki; Kuwabara, Hiroaki; Yamazaki, Takashi; Momose, Atsushi

2011-01-01

X-ray Talbot interferometry has been widely used as a technique for x-ray phase imaging and tomography. We propose a method using this interferometry for mapping distribution of parameters characterizing anisotropic microstructures, which are typically of the order of μm in size and cannot be resolved by the imaging system, in a sample. The method uses reduction in fringe visibility, which is caused by such unresolvable microstructures, in moire images obtained using an interferometer. We applied the method to a chloroprene rubber sponge sample, which exhibited uniaxial anisotropy of reduced visibility. We measured the dependencies of reduced visibility on both the Talbot order and the orientation of the sample and obtained maps of three parameters and their anisotropies that characterize the unresolvable anisotropic microstructures in the sample. The maps indicated that the anisotropy of the sample's visibility contrast mainly originated from the anisotropy of the microstructure elements' average size. Our method directly provides structural information on unresolvable microstructures in real space, which is only accessible through the ultra-small-angle x-ray scattering measurements in reciprocal space, and is expected to be broadly applied to material, biological, and medical sciences.

Observation of asphalt binder microstructure with ESEM.

Science.gov (United States)

Mikhailenko, P; Kadhim, H; Baaj, H; Tighe, S

2017-09-01

The observation of asphalt binder with the environmental scanning electron microscope (ESEM) has shown the potential to observe asphalt binder microstructure and its evolution with binder aging. A procedure for the induction and identification of the microstructure in asphalt binder was established in this study and included sample preparation and observation parameters. A suitable heat-sampling asphalt binder sample preparation method was determined for the test and several stainless steel and Teflon sample moulds developed, finding that stainless steel was the preferable material. The magnification and ESEM settings conducive to observing the 3D microstructure were determined through a number of observations to be 1000×, although other magnifications could be considered. Both straight run binder (PG 58-28) and an air blown oxidised binder were analysed; their structures being compared for their relative size, abundance and other characteristics, showing a clear evolution in the fibril microstructure. The microstructure took longer to appear for the oxidised binder. It was confirmed that the fibril microstructure corresponded to actual characteristics in the asphalt binder. Additionally, a 'bee' micelle structure was found as a transitional structure in ESEM observation. The test methods in this study will be used for more comprehensive analysis of asphalt binder microstructure. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

Modeling of microstructural evolution under irradiation

International Nuclear Information System (INIS)

Odette, G.R.

1979-01-01

Microstructural evolution under irradiation is an extremely complex phenomenon involving numerous interacting mechanisms which alter both the microstructure and microchemistry of structural alloys. Predictive procedures which correlate primary irradiation and material variables to microstructural response are needed to extrapolate from the imperfect data base, which will be available, to fusion reactor conditions. Clearly, a marriage between models and experiments is needed. Specific steps to achieving such a marriage in the form of composite correlation model analysis are outlined and some preliminary results presented. The strongly correlated nature of microstructural evolution is emphasized and it is suggested that rate theory models, resting on the principle of material balances and focusing on coupled point defect-microchemical segregation processes, may be a practical approach to correlation model development. (orig.)

Literature study on the microstructure of bentonite and its effect on diffusion

International Nuclear Information System (INIS)

Muurinen, A.; Lehikoinen, J.; Pusch, R.

1994-12-01

In the study the available information from the literature on the microstructural properties of bentonite and its main component montmorillonite have been compiled, together with different phenomena which have been found to participate in the diffusion process in bentonite. (167 refs., 36 figs., 6 tabs.)

Microstructure characteristics and effect of aging process on the mechanical properties of squeeze-cast AZ91 alloy

International Nuclear Information System (INIS)

Han, G.M.; Han, Z.Q.; Luo, A.A.; Liu, B.C.

2015-01-01

Highlights: • Characterization of three-dimensional morphologies of precipitates using AFM. • Quantitative microstructure of aged squeeze-cast AZ91 alloy. • The non-uniform continuous precipitation during aging of squeeze-cast AZ91 alloy. • The relationship between microstructure and property of aged squeeze-cast AZ91 alloy. - Abstract: Quantitative microstructure information is critical to modeling and prediction of mechanical properties of structural components. In this study, the microstructure characteristics of aged squeeze-cast AZ91 alloy were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) analyses. Particularly, a study of the three-dimensional morphology of continuous precipitation during heat treatment was carried out using a combination of TEM and AFM. The results showed that a typical precipitate consisted of three kinds of faces, namely, broad, side, and end faces. The precipitate also presented a lath-shaped morphology with lozenge ends. Combined SEM and TEM analyses revealed quantitative information on the sizes and area number densities of precipitates after aging at different temperatures with different times. In general, the length and width of precipitates increased more rapidly than thickness during aging. The area number density initially increased and then slowly decreased because of coarsening. Furthermore, a special microstructure characteristic of the non-uniform continuous precipitation during aging was investigated using electron probe microanalysis (EPMA). The relationship between hardness response and yield strength was established

Microstructure of Matrix in UHTC Composites

Science.gov (United States)

Johnson, Sylvia; Stackpoole, Margaret; Gusman, Michael I.; Chavez-Garia Jose; Doxtad, Evan

2011-01-01

Approaches to controlling the microstructure of Ultra High Temperature Ceramics (UHTCs) are described.. One matrix material has been infiltrated into carbon weaves to make composite materials. The microstructure of these composites is described.

Superlattice Microstructured Optical Fiber

Science.gov (United States)

Tse, Ming-Leung Vincent; Liu, Zhengyong; Cho, Lok-Hin; Lu, Chao; Wai, Ping-Kong Alex; Tam, Hwa-Yaw

2014-01-01

A generic three-stage stack-and-draw method is demonstrated for the fabrication of complex-microstructured optical fibers. We report the fabrication and characterization of a silica superlattice microstructured fiber with more than 800 rhomboidally arranged air-holes. A polarization-maintaining fiber with a birefringence of 8.5 × 10−4 is demonstrated. The birefringent property of the fiber is found to be highly insensitive to external environmental effects, such as pressure. PMID:28788693

Three-dimensional interconnected nickel phosphide networks with hollow microstructures and desulfurization performance

International Nuclear Information System (INIS)

Zhang, Shuna; Zhang, Shujuan; Song, Limin; Wu, Xiaoqing; Fang, Sheng

2014-01-01

Graphical abstract: Three-dimensional interconnected nickel phosphide networks with hollow microstructures and desulfurization performance. - Highlights: • Three-dimensional Ni 2 P has been prepared using foam nickel as a template. • The microstructures interconnected and formed sponge-like porous networks. • Three-dimensional Ni 2 P shows superior hydrodesulfurization activity. - Abstract: Three-dimensional microstructured nickel phosphide (Ni 2 P) was fabricated by the reaction between foam nickel (Ni) and phosphorus red. The as-prepared Ni 2 P samples, as interconnected networks, maintained the original mesh structure of foamed nickel. The crystal structure and morphology of the as-synthesized Ni 2 P were characterized by X-ray diffraction, scanning electron microscopy, automatic mercury porosimetry and X-ray photoelectron spectroscopy. The SEM study showed adjacent hollow branches were mutually interconnected to form sponge-like networks. The investigation on pore structure provided detailed information for the hollow microstructures. The growth mechanism for the three-dimensionally structured Ni 2 P was postulated and discussed in detail. To investigate its catalytic properties, SiO 2 supported three-dimensional Ni 2 P was prepared successfully and evaluated for the hydrodesulfurization (HDS) of dibenzothiophene (DBT). DBT molecules were mostly hydrogenated and then desulfurized by Ni 2 P/SiO 2

Surface microstructure replication in injection molding

DEFF Research Database (Denmark)

Theilade, Uffe Arlø; Hansen, Hans Nørgaard

2006-01-01

topography is transcribed onto the plastic part through complex mechanisms. This replication, however, is not perfect, and the replication quality depends on the plastic material properties, the topography itself, and the process conditions. This paper describes and discusses an investigation of injection...... molding of surface microstructures. The fundamental problem of surface microstructure replication has been studied. The research is based on specific microstructures as found in lab-on-a-chip products and on rough surfaces generated from EDM (electro discharge machining) mold cavities. Emphasis is put...... on the ability to replicate surface microstructures under normal injection-molding conditions, i.e., with commodity materials within typical process windows. It was found that within typical process windows the replication quality depends significantly on several process parameters, and especially the mold...

Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: Microstructure and wear performance

Science.gov (United States)

Hu, Yingbin; Ning, Fuda; Wang, Hui; Cong, Weilong; Zhao, Bo

2018-02-01

Titanium (Ti) and its alloys have been successfully applied to the aeronautical and biomedical industries. However, their poor tribological properties restrict their fields of applications under severe wear conditions. Facing to these challenges, this study investigated TiB reinforced Ti matrix composites (TiB-TMCs), fabricated by in-situ laser engineered net shaping (LENS) process, through analyzing parts quality, microstructure formation mechanisms, microstructure characterizations, and workpiece wear performance. At high B content areas (original B particle locations), reaction between Ti and B particles took place, generating flower-like microstructure. At low B content areas, eutectic TiB nanofibers contacted with each other with the formation of crosslinking microstructure. The crosslinking microstructural TiB aggregated and connected at the boundaries of Ti grains, forming a three-dimensional quasi-continuous network microstructure. The results show that compared with commercially pure Ti bulk parts, the TiB-TMCs exhibited superior wear performance (i.e. indentation wear resistance and friction wear resistance) due to the present of TiB reinforcement and the innovative microstructures formed inside TiB-TMCs. In addition, the qualities of the fabricated parts were improved with fewer interior defects by optimizing laser power, thus rendering better wear performance.

Microstructural and mechanical responses to various rolling speeds determined in multi-pass break-down rolling of AZ31B alloy

Science.gov (United States)

Jia, Weitao; Tang, Yan; Ning, Fangkun; Le, Qichi; Cui, Jianzhong

2018-04-01

Different rolling operations of as-cast AZ31B alloy were performed under different rolling speed (18 ∼ 72 m min‑1) and rolling pass conditions at 400 °C. Microstructural studies, tensile testing and formability evaluation relevant to each rolling operation were investigated. For 1-pass rolling, coarse average grain size (CAGS) region gradually approached the center layer as the rolling speed increased. Moreover, twins, shear bands and coarse-grain structures were the dominant components in the microstructure of plates rolled at 18, 48 and 72 m min‑1, respectively, indicating the severe deformation inhomogeneity under the high reduction per pass condition. For 2-pass rolling and 4-pass rolling, dynamic recrystallization was observed to be well and CAGS region has substantially disappeared, indicating the significant improvement in deformation uniformity and further the grain homogenization under the conditions. Microstructure uniformity degree of 2-pass rolled plates did not vary much as the rolling speed varied. On this basis, shear band distribution dominated the deformation behavior during the uniaxial tension of the 2-pass rolled plates. However, microstructure uniformity accompanied by twin distribution played a leading role in stretching the 4-pass rolled plates.

Stochastic microstructure characterization and reconstruction via supervised learning

International Nuclear Information System (INIS)

Bostanabad, Ramin; Bui, Anh Tuan; Xie, Wei; Apley, Daniel W.; Chen, Wei

2016-01-01

Microstructure characterization and reconstruction have become indispensable parts of computational materials science. The main contribution of this paper is to introduce a general methodology for practical and efficient characterization and reconstruction of stochastic microstructures based on supervised learning. The methodology is general in that it can be applied to a broad range of microstructures (clustered, porous, and anisotropic). By treating the digitized microstructure image as a set of training data, we generically learn the stochastic nature of the microstructure via fitting a supervised learning model to it (we focus on classification trees). The fitted supervised learning model provides an implicit characterization of the joint distribution of the collection of pixel phases in the image. Based on this characterization, we propose two different approaches to efficiently reconstruct any number of statistically equivalent microstructure samples. We test the approach on five examples and show that the spatial dependencies within the microstructures are well preserved, as evaluated via correlation and lineal-path functions. The main advantages of our approach stem from having a compact empirically-learned model that characterizes the stochastic nature of the microstructure, which not only makes reconstruction more computationally efficient than existing methods, but also provides insight into morphological complexity.

Task-relevant perceptual features can define categories in visual memory too.

Science.gov (United States)

Antonelli, Karla B; Williams, Carrick C

2017-11-01

Although Konkle, Brady, Alvarez, and Oliva (2010, Journal of Experimental Psychology: General, 139(3), 558) claim that visual long-term memory (VLTM) is organized on underlying conceptual, not perceptual, information, visual memory results from visual search tasks are not well explained by this theory. We hypothesized that when viewing an object, any task-relevant visual information is critical to the organizational structure of VLTM. In two experiments, we examined the organization of VLTM by measuring the amount of retroactive interference created by objects possessing different combinations of task-relevant features. Based on task instructions, only the conceptual category was task relevant or both the conceptual category and a perceptual object feature were task relevant. Findings indicated that when made task relevant, perceptual object feature information, along with conceptual category information, could affect memory organization for objects in VLTM. However, when perceptual object feature information was task irrelevant, it did not contribute to memory organization; instead, memory defaulted to being organized around conceptual category information. These findings support the theory that a task-defined organizational structure is created in VLTM based on the relevance of particular object features and information.

Influence of microstructure on the room temperature flow behaviour of Mod. 9Cr-1Mo steel

International Nuclear Information System (INIS)

Kishore, R.; Singh, R.N.; Kashyap, B.P.

2005-01-01

The normalizing heat treatment conditions of T-91 grade steel were altered in order to get different austenite/martensite packet grain sizes. Tempering of the steel was carried out at (1) peak hardening temperature and (2) at temperature closer to commercial treatment. Tempering of these specimens, austenitized at a chosen temperature, at the two tempering temperatures resulted in the modification of the fine scale structure by the formation of different carbide types and their distribution. Tensile testing of these specimens (under all the three conditions) was conducted at ambient temperature in order to study the influence of the microstructures on the deformation behaviour. The flow stress, hardness and room temperature impact toughness showed an inverse relation with the martensite packet/austenite grain size. The deformation behavior of the specimens under the three heat treatment conditions was analyzed according to Ashby's model was made assuming. The slip length, λ g , was estimated from the σ-ε 1/2 plot and compared with the relevant microstructure parameters. The as-received material was seen to undergo aligatoring damage during cold rolling and a modification in their microstructure could render a defect free product. (author)

Coulomb disintegration as an information source for relevant processes in nuclear astrophysics

International Nuclear Information System (INIS)

Bertulani, C.A.

1989-01-01

The possibility of obtaining the photodisintegration cross section using the equivalent-photon number method first deduced and employed for the Coulomb disintegration processes has been suggested. This is very interesting because there exist radioactive capture processes, related to the photodisintegration through time reversal, that are relevant in astrophysics. In this paper, the recent results of the Karlsruhe and the Texas A and M groups on the Coulomb disintegration of 6 Li and 7 Li and the problems of the method are discussed. The ideas developed in a previous paper (Nucl. Phys. A458 (1986) 188) are confirmed qualitatively. To understand the process quantitatively it is necessary to use a quantum treatment that would imply the introduction of Coulomb excitation effects of higher orders. The Coulomb disintegration of exotic secondary beams is also studied. It is particularly interesting the question about what kind of nuclear structure information, as binding energies of momentum distributions, may be obtained. (Author) [es

Microstructural study of multiaxial low cycle fatigue

Directory of Open Access Journals (Sweden)

Masao Sakane

2015-07-01

Full Text Available This paper discusses the relationship between the stress response and the microstructure under tension-torsion multiaxial proportional and nonproportional loadings. Firstly, this paper discusses the material dependency of additional hardening of FCC materials in relation with the stacking fault energy of the materials. The FCC materials studied were Type 304 stainless steel, pure copper, pure nickel, pure aluminum and 6061 aluminum alloy. The material with lower stacking fault energy showed stronger additional hardening, which was discussed in relation with slip morphology and dislocation structures. This paper, next, discusses dislocation structures of Type 304 stainless steel under proportional and nonproportional loadings at high temperature. The relationship between the microstructure and the hardening behavior whether isotropic or anisotropic was discussed. The re-arrangeability of dislocation structure was discussed in loading mode change tests. Microstructures of the steel was discussed in more extensively programmed multiaxial low cycle fatigue tests at room temperature, where three microstructures, dislocation bundle, stacking fault and cells, which were discussed in relation with the stress response. Finally, temperature dependence of the microstructure was discussed under proportional and nonproportional loadings, by comparing the microstructures observed at room and high temperatures.

Information relevant to ensuring that occupational radiation exposures at nuclear power stations will be as low as in reasonably achievable

International Nuclear Information System (INIS)

Anon.

1979-01-01

Regulations require that all reasonable efforts must be made to maintain exposure to radiation as far below the limits specified in 10 CFR Part 20 as is reasonably achievable. Information is provided relevant to attaining goals and objectives for planning, designing, constructing, operating and decommissioning a light-water-cooled nuclear power station to meet that criterion. Much of the information presented is also applicable to other than light-water-cooled nuclear power stations

Microstructure and Property Evolution in Advanced Cladding and Duct Materials Under Long-Term and Elevated Temperature Irradiation: Modeling and Experimental Investigation

Energy Technology Data Exchange (ETDEWEB)

Wirth, Brian; Morgan, Dane; Kaoumi, Djamel; Motta, Arthur

2013-12-01

The in-service degradation of reactor core materials is related to underlying changes in the irradiated microstructure. During reactor operation, structural components and cladding experience displacement of atoms by collisions with neutrons at temperatures at which the radiation-induced defects are mobile, leading to microstructure evolution under irradiation that can degrade material properties. At the doses and temperatures relevant to fast reactor operation, the microstructure evolves by dislocation loop formation and growth, microchemistry changes due to radiation-induced segregation, radiation-induced precipitation, destabilization of the existing precipitate structure, and in some cases, void formation and growth. These processes do not occur independently; rather, their evolution is highly interlinked. Radiationinduced segregation of Cr and existing chromium carbide coverage in irradiated alloy T91 track each other closely. The radiation-induced precipitation of Ni-Si precipitates and RIS of Ni and Si in alloys T91 and HCM12A are likely related. Neither the evolution of these processes nor their coupling is understood under the conditions required for materials performance in fast reactors (temperature range 300-600°C and doses beyond 200 dpa). Further, predictive modeling is not yet possible as models for microstructure evolution must be developed along with experiments to characterize these key processes and provide tools for extrapolation. To extend the range of operation of nuclear fuel cladding and structural materials in advanced nuclear energy and transmutation systems to that required for the fast reactor, the irradiation-induced evolution of the microstructure, microchemistry, and the associated mechanical properties at relevant temperatures and doses must be understood. Predictive modeling relies on an understanding of the physical processes and also on the development of microstructure and microchemical models to describe their evolution under

Locating relevant patient information in electronic health record data using representations of clinical concepts and database structures.

Science.gov (United States)

Pan, Xuequn; Cimino, James J

2014-01-01

Clinicians and clinical researchers often seek information in electronic health records (EHRs) that are relevant to some concept of interest, such as a disease or finding. The heterogeneous nature of EHRs can complicate retrieval, risking incomplete results. We frame this problem as the presence of two gaps: 1) a gap between clinical concepts and their representations in EHR data and 2) a gap between data representations and their locations within EHR data structures. We bridge these gaps with a knowledge structure that comprises relationships among clinical concepts (including concepts of interest and concepts that may be instantiated in EHR data) and relationships between clinical concepts and the database structures. We make use of available knowledge resources to develop a reproducible, scalable process for creating a knowledge base that can support automated query expansion from a clinical concept to all relevant EHR data.

Wetting on micro-structured surfaces: modelling and optimization

DEFF Research Database (Denmark)

Cavalli, Andrea

-patterns, and suggests that there is a balance between optimal wetting properties and mechanical robustness of the microposts. We subsequently analyse liquid spreading on surfaces patterned with slanted microposts. Such a geometry induces unidirectional liquid spreading, as observed in several recent experiments. Our...... liquid spreading and spontaneous drop removal on superhydrophobic surfaces. We do this by applying different numerical techniques, suited for the specific topic. We first consider superhydrophobicity, a condition of extreme water repellency associated with very large static contact angles and low roll......The present thesis deals with the wetting of micro-structured surfaces by various fluids, and its goal is to elucidate different aspects of this complex interaction. In this work we address some of the most relevant topics in this field such as superhydrophobicity, oleophobicity, unidirectional...

Microstructure Modeling of Third Generation Disk Alloys

Science.gov (United States)

Jou, Herng-Jeng

2010-01-01

The objective of this program was to model, validate, and predict the precipitation microstructure evolution, using PrecipiCalc (QuesTek Innovations LLC) software, for 3rd generation Ni-based gas turbine disc superalloys during processing and service, with a set of logical and consistent experiments and characterizations. Furthermore, within this program, the originally research-oriented microstructure simulation tool was to be further improved and implemented to be a useful and user-friendly engineering tool. In this report, the key accomplishments achieved during the third year (2009) of the program are summarized. The activities of this year included: Further development of multistep precipitation simulation framework for gamma prime microstructure evolution during heat treatment; Calibration and validation of gamma prime microstructure modeling with supersolvus heat treated LSHR; Modeling of the microstructure evolution of the minor phases, particularly carbides, during isothermal aging, representing the long term microstructure stability during thermal exposure; and the implementation of software tools. During the research and development efforts to extend the precipitation microstructure modeling and prediction capability in this 3-year program, we identified a hurdle, related to slow gamma prime coarsening rate, with no satisfactory scientific explanation currently available. It is desirable to raise this issue to the Ni-based superalloys research community, with hope that in future there will be a mechanistic understanding and physics-based treatment to overcome the hurdle. In the mean time, an empirical correction factor was developed in this modeling effort to capture the experimental observations.

Effects of hot rolled microstructure after twin-roll casting on microstructure, texture and magnetic properties of low silicon non-oriented electrical steel

International Nuclear Information System (INIS)

Liu, Hai-Tao; Wang, Yin-Ping; An, Ling-Zi; Wang, Zhao-Jie; Hou, Dao-Yuan; Chen, Jun-Mou; Wang, Guo-Dong

2016-01-01

In this work, a 0.71 wt%Si+0.44 wt%Al as-cast strip was produced by novel twin-roll casting. Some as-cast samples were respectively reheated and hot rolled at different temperatures in order to obtain different microstructure prior to cold rolling and annealing. The effects of the hot rolled microstructure on microstructure, texture evolution and magnetic properties were investigated in detail. A coarse deformed microstructure with λ-fiber texture was formed after hot rolling at 850–1050 °C, finally leading to an inhomogeneous recrystallization microstructure with strong λ-fiber, Goss and extremely weak γ-fiber texture. By contrast, a fine transformed microstructure was formed after hot rolling at 1150–1250 °C, finally leading to a fine and homogeneous recrystallization microstructure with stronger α-fiber, γ-fiber and much weaker λ-fiber texture. It should be noted that both the magnetic induction and core loss non-monotonically decreased or increased according to the hot rolling temperature. The unfavorable α-fiber and γ-fiber textures in the annealed sheets were much weaker than those of the conventional products regardless of the hot rolling temperature, thus contributing to a much higher magnetic induction. However, the average grain size in the annealed sheets was much lower than those of the conventional products regardless of the hot rolling temperature, thus leading to a higher core loss except the case of 1050 °C. Hence, it is underscored that better integrated magnetic properties than those of the conventional products can be obtained by optimizing the hot rolled microstructure to produce final desirable recrystallization microstructure and texture. - Highlights: • Non-oriented silicon steel was fabricated using twin-roll casting route. • Microstructure and texture evolution were clarified. • Effects of the hot rolled microstructure were investigated in detail. • Formation mechanism of the recrystallization texture was explored. �

Effects of hot rolled microstructure after twin-roll casting on microstructure, texture and magnetic properties of low silicon non-oriented electrical steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn; Wang, Yin-Ping; An, Ling-Zi; Wang, Zhao-Jie; Hou, Dao-Yuan; Chen, Jun-Mou; Wang, Guo-Dong

2016-12-15

In this work, a 0.71 wt%Si+0.44 wt%Al as-cast strip was produced by novel twin-roll casting. Some as-cast samples were respectively reheated and hot rolled at different temperatures in order to obtain different microstructure prior to cold rolling and annealing. The effects of the hot rolled microstructure on microstructure, texture evolution and magnetic properties were investigated in detail. A coarse deformed microstructure with λ-fiber texture was formed after hot rolling at 850–1050 °C, finally leading to an inhomogeneous recrystallization microstructure with strong λ-fiber, Goss and extremely weak γ-fiber texture. By contrast, a fine transformed microstructure was formed after hot rolling at 1150–1250 °C, finally leading to a fine and homogeneous recrystallization microstructure with stronger α-fiber, γ-fiber and much weaker λ-fiber texture. It should be noted that both the magnetic induction and core loss non-monotonically decreased or increased according to the hot rolling temperature. The unfavorable α-fiber and γ-fiber textures in the annealed sheets were much weaker than those of the conventional products regardless of the hot rolling temperature, thus contributing to a much higher magnetic induction. However, the average grain size in the annealed sheets was much lower than those of the conventional products regardless of the hot rolling temperature, thus leading to a higher core loss except the case of 1050 °C. Hence, it is underscored that better integrated magnetic properties than those of the conventional products can be obtained by optimizing the hot rolled microstructure to produce final desirable recrystallization microstructure and texture. - Highlights: • Non-oriented silicon steel was fabricated using twin-roll casting route. • Microstructure and texture evolution were clarified. • Effects of the hot rolled microstructure were investigated in detail. • Formation mechanism of the recrystallization texture was explored. �

Development of microstructure in thermomechanical processing of zirconium alloys

International Nuclear Information System (INIS)

Jha, S.K.; Saibaba, N.; Jayaraj, R.N.

2009-01-01

Zirconium based alloys are used for the manufacture of fuel tubes pressure tubes calandria tubes and other components of Pressurized Heavy Water Reactors (PHWRS). In single or two phase zirconium alloy system a variety of microstructure can be generated by suitable heat treatments by the process of equilibrium and non equilibrium phase transformations Microstructure can also be modified by alloying with α and β stabilizers. The microstructure in Zr alloys could be single hexagonal phase (α alloys) two phase bcc and hexagonal (α + β alloys) phase, single metastable martensitic microstructure and β with ω phase. The microstructural and micro textural evolution during thermo mechanical treatments depends strongly on such initial microstructure. Hot extrusion is a significant bulk deformation step which decides the initial microstructure of the alloy. It is carried out at elevated temperature i e above the recrystallization temperature, which enable imposition of large strains in single step. This deformation causes a significant change in the microstructure of the material and depends on extrusion process parameters such as temperature, strain rate (Ram speed), reduction ratio etc. In the present paper development of microstructures, microtexture and texture have been examined. An attempt is also made to optimise the hot working parameters for different Zirconium alloys with help of these studies. (author)

Multiscale crystal defect dynamics: A coarse-grained lattice defect model based on crystal microstructure

Science.gov (United States)

Lyu, Dandan; Li, Shaofan

2017-10-01

Crystal defects have microstructure, and this microstructure should be related to the microstructure of the original crystal. Hence each type of crystals may have similar defects due to the same failure mechanism originated from the same microstructure, if they are under the same loading conditions. In this work, we propose a multiscale crystal defect dynamics (MCDD) model that models defects by considering its intrinsic microstructure derived from the microstructure or material genome of the original perfect crystal. The main novelties of present work are: (1) the discrete exterior calculus and algebraic topology theory are used to construct a scale-up (coarse-grained) dual lattice model for crystal defects, which may represent all possible defect modes inside a crystal; (2) a higher order Cauchy-Born rule (up to the fourth order) is adopted to construct atomistic-informed constitutive relations for various defect process zones, and (3) an hierarchical strain gradient theory based finite element formulation is developed to support an hierarchical multiscale cohesive (process) zone model for various defects in a unified formulation. The efficiency of MCDD computational algorithm allows us to simulate dynamic defect evolution at large scale while taking into account atomistic interaction. The MCDD model has been validated by comparing of the results of MCDD simulations with that of molecular dynamics (MD) in the cases of nanoindentation and uniaxial tension. Numerical simulations have shown that MCDD model can predict dislocation nucleation induced instability and inelastic deformation, and thus it may provide an alternative solution to study crystal plasticity.

Facile synthesis of B-type carbonated nanoapatite with tailored microstructure

Energy Technology Data Exchange (ETDEWEB)

Gualtieri, Magdalena Lassinantti, E-mail: magdalena.gualtieri@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Romagnoli, Marcello, E-mail: marcello.romagnoli@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Hanuskova, Miriam, E-mail: Miriam.hanuskova@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Fabbri, Elena, E-mail: Elena.fabbri@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Gualtieri, Alessandro F., E-mail: Alessandro.gualtieri@unimore.it [Dipartimento di Scienze Chimiche e Geologiche, Università degli studi di Modena e Reggio Emilia, I-41121 Modena (Italy)

2014-12-15

Nanolime and a phosphate-based chelating agent were used to synthesize B-type carbonated apatite. Developed Rietveld refinement strategies allowed one to determine process yield, product crystallinity as well as structural (unit cell) and microstructural (size, strain) parameters. The effect of synthesis temperature (20–60 °C) as well as Ca/P ratio (1.5–2.5) and solid content (10–30 wt%) of the starting batch on these properties were investigated. FTIR, TEM and gas adsorption data provided supporting evidence. The process yield was 42–60 wt% and found to be governed by the Ca/P ratio. The purified products had high specific surface area (107–186 m{sup 2}/g) and crystallinity (76–97%). The unit cell parameters, correlated to the degree of structural carbonate, were sensitive to the Ca/P ratio. Instead, temperature governed the microstructural parameters. Less strained and larger crystals were obtained at higher temperatures. Long-term aging up to 6 months at 20 °C compensated for higher crystal growth kinetics at higher temperature. - Graphical abstract: Controlled synthesis of carbonated apatite at moderate temperatures using nanolime and sodiumhexametaphosphate as starting reagent. - Highlights: • Chemical synthesis of nano-sized apatite with tailored microstructure was performed. • Colloidal Ca(OH){sub 2} and a phosphorus-based chelating agents were used as reagents. • The method is simple and reproducible which facilitate industrial process scale-up. • Rietveld refinement strategies for product characterization were developed. • Rietveld analyses provided yield, microstructural and structure information.

Facile synthesis of B-type carbonated nanoapatite with tailored microstructure

International Nuclear Information System (INIS)

Gualtieri, Magdalena Lassinantti; Romagnoli, Marcello; Hanuskova, Miriam; Fabbri, Elena; Gualtieri, Alessandro F.

2014-01-01

Nanolime and a phosphate-based chelating agent were used to synthesize B-type carbonated apatite. Developed Rietveld refinement strategies allowed one to determine process yield, product crystallinity as well as structural (unit cell) and microstructural (size, strain) parameters. The effect of synthesis temperature (20–60 °C) as well as Ca/P ratio (1.5–2.5) and solid content (10–30 wt%) of the starting batch on these properties were investigated. FTIR, TEM and gas adsorption data provided supporting evidence. The process yield was 42–60 wt% and found to be governed by the Ca/P ratio. The purified products had high specific surface area (107–186 m 2 /g) and crystallinity (76–97%). The unit cell parameters, correlated to the degree of structural carbonate, were sensitive to the Ca/P ratio. Instead, temperature governed the microstructural parameters. Less strained and larger crystals were obtained at higher temperatures. Long-term aging up to 6 months at 20 °C compensated for higher crystal growth kinetics at higher temperature. - Graphical abstract: Controlled synthesis of carbonated apatite at moderate temperatures using nanolime and sodiumhexametaphosphate as starting reagent. - Highlights: • Chemical synthesis of nano-sized apatite with tailored microstructure was performed. • Colloidal Ca(OH) 2 and a phosphorus-based chelating agents were used as reagents. • The method is simple and reproducible which facilitate industrial process scale-up. • Rietveld refinement strategies for product characterization were developed. • Rietveld analyses provided yield, microstructural and structure information

Microstructural stability of a NiAl-Mo eutectic alloy

International Nuclear Information System (INIS)

Kush, M.T.; Holmes, J.W.; Gibala, R.

1999-01-01

The microstructural stability of a directionally-solidified NiAl-9 at.% Mo quasi-binary alloy was investigated under conditions of thermal cycling between the temperatures 973K and 1,473K utilizing time-temperature heating and cooling profiles which approximate potential engine applications. Two different microstructures were examined: a cellular microstructure in which the faceted second-phase Mo rods in the NiAl matrix formed misaligned cell boundaries which separated aligned cells approximately 0.4 mm in width and 5--25 mm in length, and a nearly fault-free fully columnar microstructure well aligned along the [001] direction. Both microstructures resisted coarsening under thermal cycling, but plastic deformation induced by thermal stresses introduced significant specimen shape changes. Surprisingly, the cellular microstructure, for which the cell boundary region apparently acts as a deformation buffer, exhibited better resistance to thermal fatigue than the more fault-free and better aligned columnar microstructure

Microstructural characterization of second phase regions in cast stainless steels

International Nuclear Information System (INIS)

Hoelzer, D.; Kenik, E.A.; Rowcliffe, A.F.; Busby, J.; Vitek, J.M.

2007-01-01

Full text of publication follows: Cast austenitic stainless steels offer the possibility of directly producing large and/or relatively complex structures, such as the first wall shield modules or the divertor cassette for the International Tokamak Experimental Reactor (ITER). Unfortunately, one of the inherent problems associated with casting stainless steel, especially large castings, is the formation of coarse dendrites with possibly inhomogeneously distributed second phases separated by up to several hundred microns in the microstructure. These microstructural features result from temperature and composition gradients that develop during solidification and subsequent cooling. However, detailed characterization of the second phase regions in the cast microstructures can be quite challenging to techniques such as transmission electron microscopy (TEM), which is useful for phase identification. furthermore, the information about the phases that may be present in the cast microstructures, both equilibrium and nonequilibrium, is important as input as well as for confirming predictions made by computational thermodynamics and solidification modeling. In this study, the investigation of second phase regions that formed in a large cast of a 316 stainless steel (equivalent to CF3M) will be presented and compared to simulations of the phases predicted by computational thermodynamic modeling of the solidification process. The preliminary TEM investigation of the cast microstructure was performed with specimens that were prepared by jet-polishing of 3 mm diameter discs. Although this approach allowed for the identification of the sigma and chi phases, which was consistent with the simulations, it was not suitable for detailed analysis of the second phase regions since these specimens often contained only grains of the gamma austenite phase. A better approach for preparing TEM specimens consisted of strategically lifting small sections of material from second phase regions

Salmonella Typhimurium and Staphylococcus aureus dynamics in/on variable (micro)structures of fish-based model systems at suboptimal temperatures.

Science.gov (United States)

Baka, Maria; Verheyen, Davy; Cornette, Nicolas; Vercruyssen, Stijn; Van Impe, Jan F

2017-01-02

The limited knowledge concerning the influence of food (micro)structure on microbial dynamics decreases the accuracy of the developed predictive models, as most studies have mainly been based on experimental data obtained in liquid microbiological media or in/on real foods. The use of model systems has a great potential when studying this complex factor. Apart from the variability in (micro)structural properties, model systems vary in compositional aspects, as a consequence of their (micro)structural variation. In this study, different experimental food model systems, with compositional and physicochemical properties similar to fish patés, are developed to study the influence of food (micro)structure on microbial dynamics. The microbiological safety of fish products is of major importance given the numerous cases of salmonellosis and infections attributed to staphylococcus toxins. The model systems understudy represent food (micro)structures of liquids, aqueous gels, emulsions and gelled emulsions. The growth/inactivation dynamics and a modelling approach of combined growth and inactivation of Salmonella Typhimurium and Staphylococcus aureus, related to fish products, are investigated in/on these model systems at temperatures relevant to fish products' common storage (4°C) and to abuse storage temperatures (8 and 12°C). ComBase (http://www.combase.cc/) predictions compared with the maximum specific growth rate (μ max ) values estimated by the Baranyi and Roberts model in the current study indicated that the (micro)structure influences the microbial dynamics. Overall, ComBase overestimated microbial growth at the same pH, a w and storage temperature. Finally, the storage temperature had also an influence on how much each model system affected the microbial dynamics. Copyright © 2016. Published by Elsevier B.V.

Hollow fiber ultrafiltration membranes with microstructured inner skin

NARCIS (Netherlands)

Culfaz, P.Z.; Wessling, Matthias; Lammertink, Rob G.H.

2011-01-01

Hollow fiber membranes with microstructured inner surfaces were fabricated from a PES/PVP blend using a spinneret with a microstructured needle. The effect of spinning parameters such as polymer dope flow rate, bore liquid flowrate, air gap and take-up speed on the microstructure and shape of the

Effects of loading frequency on fatigue crack growth mechanisms in α/β Ti microstructure with large colony size

International Nuclear Information System (INIS)

Sansoz, F.; Ghonem, H.

2003-01-01

This paper deals with crack tip/microstructure interactions at 520 deg. C in lamellar Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Ti6242) alloy under different fatigue loading frequencies. A series of heat treatments were performed in order to produce large colony microstructures that vary in their lamellar and colony size. Fatigue crack growth (FCG) experiments were conducted on these microstructures at loading frequencies of 10 and 0.05 Hz. The lower frequency was explored with and without imposing a 5 min hold-time at the peak stress level during each loading cycle. Results show that the crack growth behavior is sensitive to the loading frequency. For the same microstructure, the crack growth rate is found to be lower at 10 than at 0.05 Hz. The addition of a hold-time, however, did not alter the FCG rate indicating that creep strain during one loading cycle does not contribute significantly in the crack growth process. It is also shown that variations in lamella and colony size have no effects on the FCG rate except for the early stage of crack propagation. Scanning Electron Microscope examinations are performed on the fracture surface in order to identify the relevant crack growth mechanisms with respect to the loading frequency and the microstructure details. Quasi-cleavage of the α/β colonies along strong planar shear bands is shown to be a major mode of failure under all test condition. At a loading frequency of 10 Hz, the crack path proceeds arbitrary along planes either perpendicular or parallel to the long axis of α lamellae, while at 0.05 Hz, parallel-to-lamellae crack paths become favored. Corresponding differences of crack growth behavior are examined in terms of slip emission at the crack tip and interactions with the microstructure details

Control of microstructure during hot working of zirconium alloys

International Nuclear Information System (INIS)

Chakravartty, J.K.; Banerjee, S.

2005-01-01

Hot working is considered to be the most important step involved in the fabrication of zirconium alloys for nuclear reactor applications for two reasons: i) the scale of the microstructure and texture of the final product is decided at this stage and ii) the hot deformed microstructure provides a suitable starting microstructure for the subsequent fabrication steps. The resultant microstructure in turn controls the properties of the final product. In order to obtain final product with a suitable microstructure and with specified mechanical properties on a repeatable basis the control of microstructure during hot working is of paramount importance. This is usually done by studying the constitutive behaviour of the material under hot working conditions and by constructing processing maps. In the latter method, strain rate sensitivity is mapped as a function of temperature and strain rate to delineate domains within the bounds of which a specific deformation mechanism dominates. Detail microstructural analysis is then carried out on the samples deformed within the domains. Using this methodology, processing maps have been constructed for various zirconium alloys. These maps have been found to be very useful for optimizing the hot workability and control of microstructure of zirconium alloys. (author)

Relationships between microstructure and microfissuring in alloy 718

Science.gov (United States)

Thompson, R. G.

1985-01-01

Microfissures which occur in the weld heat affected zone of alloy 718 can be a limiting factor in the material's weldability. Several studies have attempted to relate microfissuring susceptibility to processing conditions, microstructure, and/or heat-to-heat chemistry differences. The present investigation studies the relationships between microstructure and microfissuring by isolating a particular microstructural feature and measuring microfissuring as a function of that feature. Results to date include the identification of a microstructure-microfissure sequence, microfissuring susceptibility as a function of grain size, and microfissuring susceptibility as a function of solution annealing time.

Modeling the microstructure of surface by applying BRDF function

Science.gov (United States)

Plachta, Kamil

2017-06-01

The paper presents the modeling of surface microstructure using a bidirectional reflectance distribution function. This function contains full information about the reflectance properties of the flat surfaces - it is possible to determine the share of the specular, directional and diffuse components in the reflected luminous stream. The software is based on the authorial algorithm that uses selected elements of this function models, which allows to determine the share of each component. Basing on obtained data, the surface microstructure of each material can be modeled, which allows to determine the properties of this materials. The concentrator directs the reflected solar radiation onto the photovoltaic surface, increasing, at the same time, the value of the incident luminous stream. The paper presents an analysis of selected materials that can be used to construct the solar concentrator system. The use of concentrator increases the power output of the photovoltaic system by up to 17% as compared to the standard solution.

CALPHAD simulation of the Mg–(Mn, Zr)–Fe system and experimental comparison with as-cast alloy microstructures as relevant to impurity driven corrosion of Mg-alloys

Energy Technology Data Exchange (ETDEWEB)

Gandel, D.S., E-mail: darren.gandel@monash.edu [CAST Cooperative Research Centre (Australia); Department of Materials Engineering, Monash University, Clayton, VIC 3800 (Australia); Easton, M.A. [CAST Cooperative Research Centre (Australia); Department of Materials Engineering, Monash University, Clayton, VIC 3800 (Australia); Gibson, M.A. [CAST Cooperative Research Centre (Australia); CSIRO Process Science and Engineering, Clayton, VIC 3168 (Australia); Birbilis, N. [CAST Cooperative Research Centre (Australia); Department of Materials Engineering, Monash University, Clayton, VIC 3800 (Australia)

2014-02-14

Four Mg alloys with variations in the ratio of Mn, Zr and Fe additions were cast and their microstructures analysed via electron microscopy. Thermodynamic calculations of the expected phases using PANDAT were evaluated with actual as-cast microstructures. Some of the as-cast alloys did appear to form phases similar to those anticipated from the PANDAT calculations. Furthermore, there was a new Mn–Fe particle interaction observed that was not predicted, but which is posited to be responsible for the increase in corrosion resistance among Mn containing Mg alloys with Fe impurities. The experimental work herein has been shown to be invaluable in the understanding of this practically important system with sparingly soluble Fe and its potential influence on the corrosion of Mg alloys. - Highlights: • Alloy microstructure of the Mg-(Mn,Zr, Fe) system was analysed and reported. • CALPHAD analysis was used in conjunction with traditional SEM analysis techniques in this study. • A proposed Mn–Fe interaction within Mg has been observed for the first time. • Experimental validation of calculated phases is required to understand the effect of Mn and Zr on Mg.

Microstructures (clumps) in turbulent plasmas

International Nuclear Information System (INIS)

Balescu, R.; Misguich, J.H.

1977-01-01

A general analysis of binary correlations in a turbulent plasma leads to a functional relation relating correlations to the one-particle distribution function. Such a relation allows to understand the mechanism of generation of the microstructures or clumps introduced by Dupree. The expressions introduced by this author appear as a lowest approximation of the general equation. The features and interpretation of these microstructures are briefly discussed [fr

[Evidence-based medicine. 2. Research of clinically relevant biomedical information. Gruppo Italiano per la Medicina Basata sulle Evidenze--GIMBE].

Science.gov (United States)

Cartabellotta, A

1998-05-01

Evidence-based Medicine is a product of the electronic information age and there are several databases useful for practice it--MEDLINE, EMBASE, specialized compendiums of evidence (Cochrane Library, Best Evidence), practice guidelines--most of them free available through Internet, that offers a growing number of health resources. Because searching best evidence is a basic step to practice Evidence-based Medicine, this second review (the first one has been published in the issue of March 1998) has the aim to provide physicians tools and skills for retrieving relevant biomedical information. Therefore, we discuss about strategies for managing information overload, analyze characteristics, usefulness and limits of medical databases and explain how to use MEDLINE in day-to-day clinical practice.

Advanced Steel Microstructural Classification by Deep Learning Methods.

Science.gov (United States)

Azimi, Seyed Majid; Britz, Dominik; Engstler, Michael; Fritz, Mario; Mücklich, Frank

2018-02-01

The inner structure of a material is called microstructure. It stores the genesis of a material and determines all its physical and chemical properties. While microstructural characterization is widely spread and well known, the microstructural classification is mostly done manually by human experts, which gives rise to uncertainties due to subjectivity. Since the microstructure could be a combination of different phases or constituents with complex substructures its automatic classification is very challenging and only a few prior studies exist. Prior works focused on designed and engineered features by experts and classified microstructures separately from the feature extraction step. Recently, Deep Learning methods have shown strong performance in vision applications by learning the features from data together with the classification step. In this work, we propose a Deep Learning method for microstructural classification in the examples of certain microstructural constituents of low carbon steel. This novel method employs pixel-wise segmentation via Fully Convolutional Neural Network (FCNN) accompanied by a max-voting scheme. Our system achieves 93.94% classification accuracy, drastically outperforming the state-of-the-art method of 48.89% accuracy. Beyond the strong performance of our method, this line of research offers a more robust and first of all objective way for the difficult task of steel quality appreciation.

Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy

Science.gov (United States)

Regev, Michael; Rashkovsky, Tal; Cabibbo, Marcello; Spigarelli, Stefano

2018-01-01

The poor weldability of the AA2024 aluminum alloy limits its use in industrial applications. Because friction stir welding (FSW) is a non-fusion welding process, it seems to be a promising solution for welding this alloy. In the current study, FSW was applied to butt weld AA2024-T3 aluminum alloy plates. Creep tests were conducted at 250 and at 315 °C on both the parent material and the friction stir welded specimens. The microstructures of the welded and non-welded AA2024-T3 specimens before and after the creep tests were studied and compared. A comprehensive transmission electron microscopy study together with a high-resolution scanning electron microscopy study and energy-dispersive x-ray spectroscopy analysis was conducted to investigate the microstructure stability. The parent material seems to contain two kinds of Cu-rich precipitates—coarse precipitates of a few microns each and uniformly dispersed fine nanosized precipitates. Unlike the parent material, the crept specimens were found to contain the two kinds of precipitates mentioned above together with platelet-like precipitates. In addition, extensive decoration of the grain boundaries with precipitates was clearly observed in the crept specimens. Controlled aging experiments for up to 280 h at the relevant temperatures were conducted on both the parent material and the welded specimens in order to isolate the contribution of exposure to high temperatures to the microstructure changes. TEM study showed the development of dislocation networks into a cellular dislocation structure in the case of the parent metal. Changes in the dislocation structure as a function of the creep strain and the FSW process were recorded. A detailed creep data analysis was conducted, taking into account the instability of the microstructure.

Relevance as process: judgements in the context of scholarly research

Directory of Open Access Journals (Sweden)

Theresa D. Anderson

2005-01-01

Full Text Available Introduction. This paper discusses how exploring the research process in-depth and over time contributes to a fuller understanding of interactions with various representations of information. Method. A longitudinal ethnographic study explored decisions made by two informants involved in scholarly research. Relevance assessment and information seeking were observed as part of informants' own ongoing research projects. Fieldwork used methods of discovery that allowed informants to shape the exploration of the practices surrounding the evolving understandings of their topics. Analysis. Inductive analysis was carried out on the qualitative data collected over a two-year period of judgements observed on a document-by-document basis. The paper introduces broad categories that point to the variability and richness of the ways that informants used representations of information resources to make relevance judgements. Results. Relevance judgements appear to be drivers of the search and research processes informants moved through during the observations. Focusing on research goals rather than on retrieval tasks brings us to a fuller understanding of the relationship between ultimate research goals and the articulation of those goals in interactions with information systems. Conclusion. Relevance assessment is a process that unfolds in the doing of a search, the making of judgements and the using of texts and representations of information.

Which Type of Risk Information to Use for Whom? Moderating Role of Outcome-Relevant Involvement in the Effects of Statistical and Exemplified Risk Information on Risk Perceptions.

Science.gov (United States)

So, Jiyeon; Jeong, Se-Hoon; Hwang, Yoori

2017-04-01

The extant empirical research examining the effectiveness of statistical and exemplar-based health information is largely inconsistent. Under the premise that the inconsistency may be due to an unacknowledged moderator (O'Keefe, 2002), this study examined a moderating role of outcome-relevant involvement (Johnson & Eagly, 1989) in the effects of statistical and exemplified risk information on risk perception. Consistent with predictions based on elaboration likelihood model (Petty & Cacioppo, 1984), findings from an experiment (N = 237) concerning alcohol consumption risks showed that statistical risk information predicted risk perceptions of individuals with high, rather than low, involvement, while exemplified risk information predicted risk perceptions of those with low, rather than high, involvement. Moreover, statistical risk information contributed to negative attitude toward drinking via increased risk perception only for highly involved individuals, while exemplified risk information influenced the attitude through the same mechanism only for individuals with low involvement. Theoretical and practical implications for health risk communication are discussed.

Microstructure and creep properties of 9-12 % Cr-steels. The influence of Co

Energy Technology Data Exchange (ETDEWEB)

Kauffmann, F.; Zies, G.; Maile, K. [Stuttgart Univ. (Germany). MPA; Straub, S. [ALSTOM Power Systems, Mannheim (Germany); Mayer, K.H. [ALSTOM Power System, Nuernberg (Germany)

2008-07-01

The martensitic 9-12 wt. % Cr steels currently developed for the application in steam power plants are aimed for service temperatures above 600 C and steam pressures above 250 bar. The creep strength of these steels strongly depends on the microstructure and thereby on the chemical composition. In the present work, a combination of various microscopy techniques is used to study the microstructural changes of creep relevant features like subgrain-size, dislocation density, the chemical composition and crystallographic structure of the occurring precipitates as well as their density and size distribution in dependence of the addition of Co for several steels developed in the frame of the COST programs. These features are then correlated with the creep strength of the materials. The behavior of the alloy CB6 with a high Co content is compared to the low Co containing CB2 and the Co free B0 at 650 C. Similar comparisons are made for the alloy FN2, FN3 and FN 4 at 600 C. (orig.)

Explaining citizens’ perceptions of international climate-policy relevance

International Nuclear Information System (INIS)

Schleich, Joachim; Faure, Corinne

2017-01-01

This paper empirically analyses the antecedents of citizens’ perceptions of the relevance of international climate policy. Its use of representative surveys in the USA, China and Germany controls for different environmental attitudes and socio-economic factors between countries. The findings of the micro-econometric analysis suggest that the perceived relevance of international climate policy is positively affected by its perceived effectiveness, approval of the key topics discussed at international climate conferences, and environmental attitudes, but is not affected by perceived procedural justice. A higher level of perceived trust in international climate policy was positively related to perceived relevance in the USA and in China, but not in Germany. Citizens who felt that they were well informed and that their position was represented at climate summits were more likely to perceive international climate policy as relevant in China in particular. Generally, the results show only weak evidence of socio-demographic effects. - Highlights: • Perceptions of climate-policy relevance increase with perceptions of effectiveness. • In China and the USA, trust increases perceptions of climate-policy relevance. • Environmental attitudes are related to perceptions of climate-policy relevance. • In China, well-informed citizens perceive climate policy as more relevant. • Socio-demographics only weakly affect perceptions of climate-policy relevance.

Differences in the microstructure and rheological properties of low-fat yoghurts from goat, sheep and cow milk.

Science.gov (United States)

Nguyen, Hanh T H; Afsar, Saeedeh; Day, Li

2018-06-01

Goat and sheep milks have long been used to produce a range of dairy products due to their nutritional value and health benefits. Information about the microstructure and rheology of goat and sheep yoghurts, however, is scarce. In this study, the microstructure, texture and rheological properties of cow, goat and sheep yoghurts were investigated and compared. The results show that a longer fermentation and gelation time was required for goat yoghurt with a lower storage modulus compared to cow and sheep yoghurts. Cooling resulted in an increase in the storage modulus at different magnitudes for cow, goat and sheep yoghurts. Goat yoghurt had a smaller particle size and a softer gel, which is linked with a more porous microstructure. The results obtained here demonstrate the effect of different milk types on the properties of yoghurts and provide a better understanding into the link between the microstructure and physical properties of the product. Copyright © 2018 Elsevier Ltd. All rights reserved.

Processing, microstructure, and properties of {beta}-CEZ

Energy Technology Data Exchange (ETDEWEB)

Peters, J.O. [Technische Univ. Hamburg-Harburg, Hamburg (Germany); Luetjering, G. [Technische Univ. Hamburg-Harburg, Hamburg (Germany); Koren, M. [Boehler Schmiedetechnik GmbH, Kapfenberg (Austria); Puschnik, H. [Boehler Schmiedetechnik GmbH, Kapfenberg (Austria); Boyer, R.R. [Boeing Mater. Technol., Seattle, WA (United States)

1996-08-15

For the {beta}-CEZ material, some of the important processing parameters to establish a necklace type of microstructure by through-transus deformation were evaluated with respect to optimizing fracture toughness and yield stress level. In addition, bi-modal microstructures which can be produced by conventional {alpha}+{beta} processing were evaluated. For the necklace microstructure a high fracture toughness value of 68 MPam{sup 1/2} at a yield stress level of 1200 MPa was reached in forgings, but the fracture toughness was anisotropic dropping to 37 MPam{sup 1/2} in the short transverse direction. For the bi-modal microstructure an isotropic fracture toughness value of 37 MPam{sup 1/2} at the same yield stress level of 1200 MPa was reached without major difficulties. (orig.)

Perceived Relevance of Educative Information on Public (Skin Health: Results of a Representative, Population-Based Telephone Survey

Directory of Open Access Journals (Sweden)

Daniela Haluza

2015-11-01

Full Text Available Individual skin health attitudes are influenced by various factors, including public education campaigns, mass media, family, and friends. Evidence-based, educative information materials assist communication and decision-making in doctor-patient interactions. The present study aims at assessing the prevailing use of skin health information material and sources and their impact on skin health knowledge, motives to tan, and sun protection. We conducted a questionnaire survey among a representative sample of Austrian residents. Print media and television were perceived as the two most relevant sources for skin health information, whereas the source physician was ranked third. Picking the information source physician increased participants’ skin health knowledge (p = 0.025 and sun-protective behavior (p < 0.001. The study results highlight the demand for targeted health messages to attain lifestyle changes towards photo-protective habits. Providing resources that encourage pro-active counseling in every-day doctor-patient communication could increase skin health knowledge and sun-protective behavior, and thus, curb the rise in skin cancer incidence rates.

Microstructure of irradiated materials

International Nuclear Information System (INIS)

Robertson, I.M.

1995-01-01

The focus of the symposium was on the changes produced in the microstructure of metals, ceramics, and semiconductors by irradiation with energetic particles. the symposium brought together those working in the different material systems, which revealed that there are a remarkable number of similarities in the irradiation-produced microstructures in the different classes of materials. Experimental, computational and theoretical contributions were intermixed in all of the sessions. This provided an opportunity for these groups, which should interact, to do so. Separate abstracts were prepared for 58 papers in this book

Role of Microstructure on the Performance of UHTCs

Science.gov (United States)

Johnson, Sylvia M.; Gasch, Matthew J.; Lawson, John W.; Gusman, Michael I.; Stackpoole, Mairead

2010-01-01

We have investigated a number of methods to control microstructure. We have routes to form: a) in situ "composites" b) Very fine microstructures. Arcjet testing and other characterization of monolithic materials. Control oxidation through microstructure and composition. Beginning to incorporate these materials as matrices for composites. Modeling effort to facilitate material design and characterization.

Fabrication of metallic microstructures by micromolding nanoparticles

Science.gov (United States)

Morales, Alfredo M.; Winter, Michael R.; Domeier, Linda A.; Allan, Shawn M.; Skala, Dawn M.

2002-01-01

A method is provided for fabricating metallic microstructures, i.e., microcomponents of micron or submicron dimensions. A molding composition is prepared containing an optional binder and nanometer size (1 to 1000 nm in diameter) metallic particles. A mold, such as a lithographically patterned mold, preferably a LIGA or a negative photoresist mold, is filled with the molding composition and compressed. The resulting microstructures are then removed from the mold and the resulting metallic microstructures so provided are then sintered.

Readability, relevance and quality of the information in Spanish on the Web for patients with rheumatoid arthritis.

Science.gov (United States)

Castillo-Ortiz, Jose Dionisio; Valdivia-Nuno, Jose de Jesus; Ramirez-Gomez, Andrea; Garagarza-Mariscal, Heber; Gallegos-Rios, Carlos; Flores-Hernandez, Gabriel; Hernandez-Sanchez, Luis; Brambila-Barba, Victor; Castaneda-Sanchez, Jose Juan; Barajas-Ochoa, Zalathiel; Suarez-Rico, Angel; Sanchez-Gonzalez, Jorge Manuel; Ramos-Remus, Cesar

Education is a major health determinant and one of the main independent outcome predictors in rheumatoid arthritis (RA). The use of the Internet by patients has grown exponentially in the last decade. To assess the characteristics, legibility and quality of the information available in Spanish in the Internet regarding to rheumatoid arthritis. The search was performed in Google using the phrase rheumatoid arthritis. Information from the first 30 pages was evaluated according to a pre-established format (relevance, scope, authorship, type of publication and financial objective). The quality and legibility of the pages were assessed using two validated tools, DISCERN and INFLESZ respectively. Data extraction was performed by senior medical students and evaluation was achieved by consensus. The Google search returned 323 hits but only 63% were considered relevant; 80% of them were information sites (71% discussed exclusively RA, 44% conventional treatment and 12% alternative therapies) and 12.5% had a primary financial interest. 60% of the sites were created by nonprofit organizations and 15% by medical associations. Web sites posted by medical institutions from the United States of America were better positioned in Spanish (Arthritis Foundation 4th position and American College of Rheumatology 10th position) than web sites posted by Spanish speaking countries. There is a risk of disinformation for patients with RA that use the Internet. We identified a window of opportunity for rheumatology medical institutions from Spanish-speaking countries to have a more prominent societal involvement in the education of their patients with RA. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.

Imaging brain microstructure with diffusion MRI

DEFF Research Database (Denmark)

Alexander, Daniel C; Dyrby, Tim B; Nilsson, Markus

2018-01-01

This article gives an overview of microstructure imaging of the brain with diffusion MRI and reviews the state of the art. The microstructure-imaging paradigm aims to estimate and map microscopic properties of tissue using a model that links these properties to the voxel scale MR signal. Imaging ...

Initial microstructural study of a Ce-La alloy using electron backscattered diffraction

International Nuclear Information System (INIS)

Scott, Thomas B.; Younes, Charles M.; Ling, Michael; Jones, Christopher P.; Nicholson, John A.; Heard, Peter J.; Jenkins, Roderick

2011-01-01

Research highlights: → First ever successful EBSD microstructural analysis of Ce-La alloy. → Successful preparation using electro-polishing in the open laboratory. → Equiaxed grains 20-40 μm in size dominate the microstructure, with random orientations, relatively straight grain boundary contacts and no evidence for crystal twinning. → All grains matched to a fcc γ-phase. → Problematic presence of entrapped oxide particles. - Abstract: To better understand and exploit the unique electronic and structural properties of f-block metals and their alloys it is perceived that an improved knowledge of the microstructural characteristics and phase changes as a function of temperature and pressure, is necessary. For other different types of metallic systems, the use of electron back-scattered diffraction (EBSD) is becoming a common practice in order to obtain detailed microstructural information, but this has, as yet, been very limited in case of f-block metals. Because of their extreme affinity to oxygen and rapid surface reaction, EBSD studies of this metal-category are very sparse with only one work published on cerium metal providing an example of technical hurdles for a prerequisite oxide-free metal surface. Specifically the need to remove the oxide by ion etching was considered essential to enable a successful EBSD analysis. The current work presents the results of a first attempt to characterise the microstructure of a Ce-La alloy using EBSD. It demonstrates that high quality diffraction patterns and crystal orientation maps can be successfully obtained following a carefully controlled preparation of the alloy surface in the open laboratory by applying a simple and reproducible electro-polishing procedure without a further need for ion etching in vaccuo.

Design and fabrication of substrates with microstructures for bio-applications through the modified optical disc process

Science.gov (United States)

Chiu, Kuo-Chi; Chang, Sheng-Li; Huang, Chu-Yu; Guan, Hann-Wen

2011-05-01

The modified optical disc process has been investigated and demonstrated to enable fast prototyping in fabricating molds and replicating substrates with various microstructures including micro-chambers and micro-channels. A disc-like microfluidic device was created and the testing results showed good performance in bonding and packaging. The switching of the nozzle-like micro-valve was also validated to work well. Furthermore, the relevant procedures of liquid samples loading, separating and mixing were also accomplished through food experiments.

Evaluation of Yogurt Microstructure Using Confocal Laser Scanning Microscopy and Image Analysis

DEFF Research Database (Denmark)

Skytte, Jacob Lercke; Ghita, Ovidiu; Whelan, Paul F.

2015-01-01

The microstructure of protein networks in yogurts defines important physical properties of the yogurt and hereby partly its quality. Imaging this protein network using confocal scanning laser microscopy (CSLM) has shown good results, and CSLM has become a standard measuring technique for fermented...... to image texture description. Here, CSLM images from a yogurt fermentation study are investigated, where production factors including fat content, protein content, heat treatment, and incubation temperature are varied. The descriptors are evaluated through nearest neighbor classification, variance analysis...... scanning microscopy images can be used to provide information on the protein microstructure in yogurt products. For large numbers of microscopy images, subjective evaluation becomes a difficult or even impossible approach, if the images should be incorporated in any form of statistical analysis alongside...

Longitudinal development of thalamic and internal capsule microstructure in autism spectrum disorder.

Science.gov (United States)

McLaughlin, Kristine; Travers, Brittany G; Dadalko, Olga I; Dean, Douglas C; Tromp, Do; Adluru, Nagesh; Destiche, Daniel; Freeman, Abigail; Prigge, Molly D; Froehlich, Alyson; Duffield, Tyler C; Zielinski, Brandon A; Bigler, Erin D; Lange, Nicholas; Anderson, Jeff S; Alexander, Andrew L; Lainhart, Janet E

2018-03-01

The thalamus is a key sensorimotor relay area that is implicated in autism spectrum disorder (ASD). However, it is unknown how the thalamus and white-matter structures that contain thalamo-cortical fiber connections (e.g., the internal capsule) develop from childhood into adulthood and whether this microstructure relates to basic motor challenges in ASD. We used diffusion weighted imaging in a cohort-sequential design to assess longitudinal development of the thalamus, and posterior- and anterior-limbs of the internal capsule (PLIC and ALIC, respectively) in 89 males with ASD and 56 males with typical development (3-41 years; all verbal). Our results showed that the group with ASD exhibited different developmental trajectories of microstructure in all regions, demonstrating childhood group differences that appeared to approach and, in some cases, surpass the typically developing group in adolescence and adulthood. The PLIC (but not ALIC nor thalamus) mediated the relation between age and finger-tapping speed in both groups. Yet, the gap in finger-tapping speed appeared to widen at the same time that the between-group gap in the PLIC appeared to narrow. Overall, these results suggest that childhood group differences in microstructure of the thalamus and PLIC become less robust in adolescence and adulthood. Further, finger-tapping speed appears to be mediated by the PLIC in both groups, but group differences in motor speed that widen during adolescence and adulthood suggest that factors beyond the microstructure of the thalamus and internal capsule may contribute to atypical motor profiles in ASD. Autism Res 2018, 11: 450-462. © 2017 International Society for Autism Research, Wiley Periodicals, Inc. Microstructure of the thalamus, a key sensory and motor brain area, appears to develop differently in individuals with autism spectrum disorder (ASD). Microstructure is important because it informs us of the density and organization of different brain tissues. During

Using small XML elements to support relevance

NARCIS (Netherlands)

G. Ramirez Camps (Georgina); T.H.W. Westerveld (Thijs); A.P. de Vries (Arjen)

2006-01-01

htmlabstractSmall XML elements are often estimated relevant by the retrieval model but they are not desirable retrieval units. This paper presents a generic model that exploits the information obtained from small elements. We identify relationships between small and relevant elements and use this

A study on the relevance and influence of the existing regulation and risk informed/performance based regulation

Energy Technology Data Exchange (ETDEWEB)

Cheong, B. J.; Koh, Y. J.; Kim, H. S.; Koh, S. H.; Kang, D. H.; Kang, T. W. [Cheju National Univ., Jeju (Korea, Republic of)

2004-02-15

The goal of this study is to estimate the Relevance and Influence of the Existing Regulation and the RI-PBR to the institutionalization of the regulatory system. This study reviews the current regulatory system and the status of the RI-PBR implementation of the US NRC and Korea based upon SECY Papers, Risk Informed Regulation Implementation Plan (RIRIP) of the US NRC and other domestic studies. Also the recent trends of the individual technologies regarding the RI-PBR and RIA are summarized.

Evolution of phase microstructure during irradiation

International Nuclear Information System (INIS)

Wiedersich, H.

1985-11-01

The phase microstructure of alloys is frequently severely altered during irradiation. Sluggish precipitation reactions including precipitation coarsening are accelerated by irradiation-enhanced diffusion. Radiation-induced segregation redistributes existing precipitate phases within the microstructure, induces precipitation of nonequilibrium phases and affects the composition of phases in multicomponent alloys. The displacement process causes disordering of ordered alloys and frequently amorphization, especially in intermetallic compounds, at low temperature. Although a good qualitative understanding of the basic process involved, i.e., displacement mixing, radiation-enhanced diffusion and radiation-induced segregation exists, methods for detailed quantitative modeling of the evolution of the microstructure of alloys remain to be developed

Contrast and stability of the axon diameter index from microstructure imaging with diffusion MRI

DEFF Research Database (Denmark)

Dyrby, Tim B; Søgaard, Lise V; Hall, Matt G

2013-01-01

(max) ) on a scanner influence the sensitivity to a range of axon diameters. Multishell high-angular-diffusion-imaging (HARDI) protocols for G(max) of 60, 140, 200, and 300 mT/m were optimized for the pulsed-gradient-spin-echo (PGSE) sequence. Data were acquired on a fixed monkey brain and Monte-Carlo simulations......(max) for enhancing contrast between axon diameter distributions and are, therefore, relevant in general for microstructure imaging methods and highlight the need for increased G(max) on future commercial systems. Magn Reson Med, 2012. © 2012 Wiley Periodicals, Inc....

Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds

Science.gov (United States)

Bechetti, Daniel H.; DuPont, John N.; Siefert, John A.; Shingledecker, John P.

2016-09-01

Characterization of the microstructural evolution of fusion welds in alloys slated for use in advanced ultrasupercritical (A-USC) boilers during creep has been performed. Creep-rupture specimens involving INCONEL® 740, NIMONIC® 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and Haynes® 282® (Haynes and 282 are registered trademarks of Haynes International) have been analyzed via light optical microscopy, scanning electron microscopy, X-ray diffraction, and thermodynamic and kinetic modeling. Focus has been given to the microstructures that develop along the grain boundaries in these alloys during creep at temperatures relevant to the A-USC process cycle, and particular attention has been paid to any evidence of the formation of local γ'-denuded or γ'-free zones. This work has been performed in an effort to understand the microstructural changes that lead to a weld strength reduction factor (WSRF) in these alloys as compared to solution annealed and aged alloy 740 base metal. γ' precipitate-free zones have been identified in alloy 740 base metal, solution annealed alloy 740 weld metal, and alloy 263 weld metal after creep. Their development during long-term thermal exposure is correlated with the stabilization of phases that are rich in γ'-forming elements ( e.g., η and G) and is suppressed by precipitation of phases that do not contain the γ' formers ( e.g., M23C6 and μ). The location of failure and creep performance in terms of rupture life and WSRF for each welded joint is presented and discussed.

Influence of electropulsing globularization on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with lamellar microstructure

Energy Technology Data Exchange (ETDEWEB)

Ye, Xiaoxin, E-mail: xiaoxinye905@gmail.com [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Tse, Zion T.H. [College of Engineering, The University of Georgia, Athens, GA 30602 (United States); Tang, Guoyi, E-mail: tanggy@mails.tsinghua.edu.cn [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Geng, Yubo [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Song, Guolin [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China)

2015-01-12

The effect of high-energy electropulsing treatment (EPT) on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with initial lamellar microstructure was investigated. The results indicated that EPT accelerated the phase change process tremendously inducing equiaxed microstructure in titanium alloy. The EPT-induced microstructural change resulted in remarkably increasing elongation-to-failure while the tensile strength remained unchanged. A mechanism for rapid phase change in low temperature during EPT was proposed based on the reduction of nucleation thermodynamic barrier and enhancement of atomic diffusion. A medium migration model was utilized for discussing the globularization process.

Influence of electropulsing globularization on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with lamellar microstructure

International Nuclear Information System (INIS)

Ye, Xiaoxin; Tse, Zion T.H.; Tang, Guoyi; Geng, Yubo; Song, Guolin

2015-01-01

The effect of high-energy electropulsing treatment (EPT) on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with initial lamellar microstructure was investigated. The results indicated that EPT accelerated the phase change process tremendously inducing equiaxed microstructure in titanium alloy. The EPT-induced microstructural change resulted in remarkably increasing elongation-to-failure while the tensile strength remained unchanged. A mechanism for rapid phase change in low temperature during EPT was proposed based on the reduction of nucleation thermodynamic barrier and enhancement of atomic diffusion. A medium migration model was utilized for discussing the globularization process

Microstructure of rapidly solidified materials

Science.gov (United States)

Jones, H.

1984-07-01

The basic features of rapidly solidified microstructures are described and differences arising from alternative processing strategies are discussed. The possibility of achieving substantial undercooling prior to solidification in processes such as quench atomization and chill block melt spinning can give rise to striking microstructural transitions even when external heat extraction is nominally Newtonian. The increased opportunity in laser and electron beam surface melting for epitaxial growth on the parent solid at an accelerating rate, however, does not exclude the formation of nonequilibrium phases since the required undercooling can be locally attained at the solidification front which is itself advancing at a sufficiently high velocity. The effects of fluid flow indicated particularly in melt spinning and surface melting are additional to the transformational and heat flow considerations that form the present basis for interpretation of such microstructural effects.

Microstructural Analyses of Topopah Spring Tuff from the Large Block Test at Fran Ridge, Nevada

International Nuclear Information System (INIS)

Roberts, J.J.

2000-01-01

Microstructural information (e.g., porosity, pore size distribution, and surface area) of porous media is critical to understanding water transport mechanisms and physical properties and their bearing on geophysical measurements. We report microstructural data obtained by mercury injection porosimetry (MIP) on 33 samples of densely welded Topopah Spring tuff from Fran Ridge, Yucca Mountain, Nevada Test Site (NTS), Nevada. The characterization of these samples is also important for the interpretation and analysis of the Large Block Test (LBT) performed in support of the Yucca Mountain Project (YMP). This report includes previously published data on samples from the same location (Roberts and Lin, 1996). We also present information from the Yucca Mountain Site Characterization Project/Lawrence Livermore National Laboratory (YMSCP/LLNL) Large Block Test Engineering Plan (Wilder, 1995) to allow correlation of our data directly to various planes within the Large Block

Value Relevance of Investment Properties: Evidence from the Brazilian Capital Market

Directory of Open Access Journals (Sweden)

Ketlyn Alves Gonçalves

2017-04-01

Full Text Available This study investigates the relevance to the capital market of the assets recognized as investment properties of companies listed on the BM&F BOVESPA, in the period from 2011 to 2014. The research conducted was based on the Ohlson model (1995 and panel analysis was carried out using linear regression with POLS and Fixed and Random Effects estimators. Two hypothesis were made: (i that Earning and Equity generate accounting information relevant to investors; and (2 that Earning, Equity and Investment Property generate accounting information relevant to investors, assuming that investment properties have incremental effect on the relevance of this information relative only to earning and to equity. Both hypotheses were rejected, so it is concluded that Investment Property assets are not of value relevance in the determination of share price and do not influence the decision making of users of accounting information. The study adds to the limited literature on the value relevance of Investment Property, permitting a better understanding of the impact of accounting disclosures used by companies on their market value.

Developing decision-relevant data and information systems for California water through listening and collaboration

Science.gov (United States)

Bales, R. C.; Bernacchi, L.; Conklin, M. H.; Viers, J. H.; Fogg, G. E.; Fisher, A. T.; Kiparsky, M.

2017-12-01

California's historic drought of 2011-2015 provided excellent conditions for researchers to listen to water-management challenges from decision makers, particularly with regard to data and information needs for improved decision making. Through the UC Water Security and Sustainability Research Initiative (http://ucwater.org/) we began a multi-year dialog with water-resources decision makers and state agencies that provide data and technical support for water management. Near-term products of that collaboration will be both a vision for a 21st-century water data and information system, and near-term steps to meet immediate legislative deadlines in a way that is consistent with the longer-term vision. While many university-based water researchers engage with state and local agencies on both science and policy challenges, UC Water's focus was on: i) integrated system management, from headwaters through groundwater and agriculture, and on ii) improved decision making through better water information systems. This focus aligned with the recognition by water leaders that fundamental changes in the way the state manages water were overdue. UC Water is focused on three "I"s: improved water information, empowering Institutions to use and to create new information, and enabling decision makers to make smart investments in both green and grey Infrastructure. Effective communication with water decision makers has led to engagement on high-priority programs where large knowledge gaps remain, including more-widespread groundwater recharge of storm flows, restoration of mountain forests in important source-water areas, governance structures for groundwater sustainability, and filling information gaps by bringing new technology to bear on measurement and data programs. Continuing engagement of UC Water researchers in public dialog around water resources, through opinion pieces, feature articles, blogs, white papers, social media, video clips and a feature documentary film have

Fusion-relevant basic radiation effects: theory and experiment

International Nuclear Information System (INIS)

Mansur, L.K.; Coghlan, W.A.; Farrell, K.; Horton, L.L.; Lee, E.H.; Lewis, M.B.; Packan, N.H.

1983-01-01

A summary is given of results of the basic radiation effects program at Oak Ridge National Laboratory, which are relevant to fusion reactor materials applications. The basic radiation effects program at ORNL is a large effort with the dual objectives of understanding the atomic and microstructural defect mechanisms underlying radiation effects and of determining principles for the design of radiation resistant materials. A strength of this effort is the parallel and integrated experimental and theoretical approaches in each major research area. The experimental effort is active in electron microscopy, ion irradiations and ion-beam techniques, neutron irradiations, surface analysis and in other areas. The theoretical effort is active in developing the theory of radiation effects for a broad range of phenomena and in applying it to the design and interpretation of experiments and to alloy design

Quantification of microstructural features in α/β titanium alloys

International Nuclear Information System (INIS)

Tiley, J.; Searles, T.; Lee, E.; Kar, S.; Banerjee, R.; Russ, J.C.; Fraser, H.L.

2004-01-01

Mechanical properties of α/β Ti alloys are closely related to their microstructure. The complexity of the microstructural features involved makes it rather difficult to develop models for predicting properties of these alloys. Developing predictive rules-based models for α/β Ti alloys requires a huge database consisting of quantified microstructural data. This in turn requires the development of rigorous stereological procedures capable of quantifying the various microstructural features of interest imaged using optical and scanning electron microscopy (SEM) micrographs. In the present paper, rigorous stereological procedures have been developed for quantifying four important microstructural features in these alloys: thickness of Widmanstaetten α laths, colony scale factor, prior β grain size, and volume fraction of Widmanstaetten α laths

Optical fabrication of large area photonic microstructures by spliced lens

Science.gov (United States)

Jin, Wentao; Song, Meng; Zhang, Xuehua; Yin, Li; Li, Hong; Li, Lin

2018-05-01

We experimentally demonstrate a convenient approach to fabricate large area photorefractive photonic microstructures by a spliced lens device. Large area two-dimensional photonic microstructures are optically induced inside an iron-doped lithium niobate crystal. The experimental setups of our method are relatively compact and stable without complex alignment devices. It can be operated in almost any optical laboratories. We analyze the induced triangular lattice microstructures by plane wave guiding, far-field diffraction pattern imaging and Brillouin-zone spectroscopy. By designing the spliced lens appropriately, the method can be easily extended to fabricate other complex large area photonic microstructures, such as quasicrystal microstructures. Induced photonic microstructures can be fixed or erased and re-recorded in the photorefractive crystal.

Innovative microstructures in ThO2-UO2 system

International Nuclear Information System (INIS)

Kutty, T.R.G.; Sengupta, A.K.; Majumdar, S.; Sah, D.N.; Kamath, H.S.

2005-01-01

The basic properties that really matter to the nuclear scientists are those that have greatest influence on microstructure: crystal structure, defects concentration and phase stability. The role of microstructure and crystal defects in determining the engineering properties are always acknowledged. Microstructure of nuclear fuels controls the in-pile fuel behavior like fission gas release, plasticity, in-pile creep and swelling. Conventional nuclear ceramic fabrication process consists of a number of stages, including calcination, milling, incorporating additives, pressing, drying and densification. Since each of these steps affects the microstructure of fuel pellets they must all be understood and a more holistic approach is required when processing nuclear ceramics compared to metals and polymers. It is possible to obtain a wide range of microstructures for ThO 2 -UO 2 system if a proper fabrication route is chosen. It is possible to tailor microstructure as per our requirement so that an improved behaviour during irradiation is expected. The improvement in plasticity and fission gas release can be attained by modifying the microstructure during fabrication. This paper deals with fabrication of ThO 2 -UO 2 pellets of varying U content and its characterization with the help of optical microscopy, XRD, SEM and EPMA. The microstructures are characterized in terms grain size, pore size and its distribution and homogeneity of uranium. (author)

Microstructures and properties of aluminum die casting alloys

Energy Technology Data Exchange (ETDEWEB)

M. M. Makhlouf; D. Apelian; L. Wang

1998-10-01

This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

Advancing the Relevance Criteria for Video Search and Visual Summarization

NARCIS (Netherlands)

Rudinac, S.

2013-01-01

To facilitate finding of relevant information in ever-growing multimedia collections, a number of multimedia information retrieval solutions have been proposed over the past years. The essential element of any such solution is the relevance criterion deployed to select or rank the items from a

Microstructural and analytical analysis of plasma dissociated zircon

International Nuclear Information System (INIS)

Minnaar, E G; Neethling, J H; Lee, M E; Snyders, E

2012-01-01

The investigation of the microstructure and distribution of impurities was carried out on plasma dissociated zircon (PDZ). The morphology of the PDZ and crystalline nature of the zirconia was determined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) while energy dispersive X-ray spectrometry (EDS) provided compositional information. The SEM and TEM results indicate that the morphology and crystalline nature of the zirconia varies as a result of the existence of a thermal gradient. The EDS results show that the majority of the impurities segregates to the silica phase of the PDZ.

Morphology and microstructure of composite materials

Science.gov (United States)

Tiwari, S. N.; Srinivansan, K.

1991-01-01

Lightweight continuous carbon fiber based polymeric composites are currently enjoying increasing acceptance as structural materials capable of replacing metals and alloys in load bearing applications. As with most new materials, these composites are undergoing trials with several competing processing techniques aimed at cost effectively producing void free consolidations with good mechanical properties. As metallic materials have been in use for several centuries, a considerable database exists on their morphology - microstructure; and the interrelationships between structure and properties have been well documented. Numerous studies on composites have established the crucial relationship between microstructure - morphology and properties. The various microstructural and morphological features of composite materials, particularly those accompanying different processing routes, are documented.

Microstructure and properties of pipeline steel with a ferrite/martensite dual-phase microstructure

International Nuclear Information System (INIS)

Li Rutao; Zuo Xiurong; Hu Yueyue; Wang Zhenwei; Hu, Dingxu

2011-01-01

In order to satisfy the transportation of the crude oil and gas in severe environmental conditions, a ferrite/martensite dual-phase pipeline steel has been developed. After a forming process and double submerged arc welding, the microstructure of the base metal, heat affected zone and weld metal was characterized using scanning electron microscopy and transmission electron microscopy. The pipe showed good deformability and an excellent combination of high strength and toughness, which is suitable for a pipeline subjected to the progressive and abrupt ground movement. The base metal having a ferrite/martensite dual-phase microstructure exhibited excellent mechanical properties in terms of uniform elongation of 7.5%, yield ratio of 0.78, strain hardening exponent of 0.145, an impact energy of 286 J at - 10 deg. C and a shear area of 98% at 0 deg. C in the drop weight tear test. The tensile strength and impact energy of the weld metal didn't significantly reduce, because of the intragranularly nucleated acicular ferrites microstructure, leading to high strength and toughness in weld metal. The heat affected zone contained complete quenching zone and incomplete quenching zone, which exhibited excellent low temperature toughness of 239 J at - 10 deg. C. - Research Highlights: →The pipe with ferrite/martensite microstructure shows high deformability. →The base metal of the pipe consists of ferrite and martensite. →Heat affected zone shows excellent low temperature toughness. →Weld metal mainly consists of intragranularly nucleated acicular ferrites. →Weld metal shows excellent low temperature toughness and high strength.

Relevant Scatterers Characterization in SAR Images

Science.gov (United States)

Chaabouni, Houda; Datcu, Mihai

2006-11-01

Recognizing scenes in a single look meter resolution Synthetic Aperture Radar (SAR) images, requires the capability to identify relevant signal signatures in condition of variable image acquisition geometry, arbitrary objects poses and configurations. Among the methods to detect relevant scatterers in SAR images, we can mention the internal coherence. The SAR spectrum splitted in azimuth generates a series of images which preserve high coherence only for particular object scattering. The detection of relevant scatterers can be done by correlation study or Independent Component Analysis (ICA) methods. The present article deals with the state of the art for SAR internal correlation analysis and proposes further extensions using elements of inference based on information theory applied to complex valued signals. The set of azimuth looks images is analyzed using mutual information measures and an equivalent channel capacity is derived. The localization of the "target" requires analysis in a small image window, thus resulting in imprecise estimation of the second order statistics of the signal. For a better precision, a Hausdorff measure is introduced. The method is applied to detect and characterize relevant objects in urban areas.

X-ray diffraction imaging of material microstructures

KAUST Repository

Varga, Laszlo

2016-10-20

Various examples are provided for x-ray imaging of the microstructure of materials. In one example, a system for non-destructive material testing includes an x-ray source configured to generate a beam spot on a test item; a grid detector configured to receive x- rays diffracted from the test object; and a computing device configured to determine a microstructure image based at least in part upon a diffraction pattern of the x-rays diffracted from the test object. In another example, a method for determining a microstructure of a material includes illuminating a beam spot on the material with a beam of incident x-rays; detecting, with a grid detector, x-rays diffracted from the material; and determining, by a computing device, a microstructure image based at least in part upon a diffraction pattern of the x-rays diffracted from the material.

Microstructure study of AUC and UO2

International Nuclear Information System (INIS)

Pan Ying; Gao Dihua; Lu Huaichang

1992-01-01

The microstructures of AUC, UO 2 powder and pellets were investigated with metallo-scope, SEM, TEM, XRD, and image analyzer. The influence of the reduction conditions of AUC on the microstructures of UO 2 powder and pellet were studied

Inventory of alloy composition, microstructures and mechanical ...

African Journals Online (AJOL)

Inventory of alloy composition, microstructures and mechanical properties of automobile engine parts. ... Journal of Applied Science, Engineering and Technology ... This research work investigated the chemical compositions, microstructures and mechanical properties of the ferrous and non-ferrous auto engine parts such ...

Utilization of FEM model for steel microstructure determination

Science.gov (United States)

Kešner, A.; Chotěborský, R.; Linda, M.; Hromasová, M.

2018-02-01

Agricultural tools which are used in soil processing, they are worn by abrasive wear mechanism cases by hard minerals particles in the soil. The wear rate is influenced by mechanical characterization of tools material and wear rate is influenced also by soil mineral particle contents. Mechanical properties of steel can be affected by a technology of heat treatment that it leads to a different microstructures. Experimental work how to do it is very expensive and thanks to numerical methods like FEM we can assumed microstructure at low cost but each of numerical model is necessary to be verified. The aim of this work has shown a procedure of prediction microstructure of steel for agricultural tools. The material characterizations of 51CrV4 grade steel were used for numerical simulation like TTT diagram, heat capacity, heat conduction and other physical properties of material. A relationship between predicted microstructure by FEM and real microstructure after heat treatment shows a good correlation.

A Markov random field approach for microstructure synthesis

International Nuclear Information System (INIS)

Kumar, A; Nguyen, L; DeGraef, M; Sundararaghavan, V

2016-01-01

We test the notion that many microstructures have an underlying stationary probability distribution. The stationary probability distribution is ubiquitous: we know that different windows taken from a polycrystalline microstructure are generally ‘statistically similar’. To enable computation of such a probability distribution, microstructures are represented in the form of undirected probabilistic graphs called Markov Random Fields (MRFs). In the model, pixels take up integer or vector states and interact with multiple neighbors over a window. Using this lattice structure, algorithms are developed to sample the conditional probability density for the state of each pixel given the known states of its neighboring pixels. The sampling is performed using reference experimental images. 2D microstructures are artificially synthesized using the sampled probabilities. Statistical features such as grain size distribution and autocorrelation functions closely match with those of the experimental images. The mechanical properties of the synthesized microstructures were computed using the finite element method and were also found to match the experimental values. (paper)

Towards Quantification of Relations Between Electrode Polarisation and Microstructure

DEFF Research Database (Denmark)

Ramos, Tania; Hjelm, Johan; Mogensen, Mogens Bjerg

2011-01-01

The total cell resistances of three Riso DTU solid oxide fuel cells (SOFCs) were broken down into individual contributions, by the combined use of electrochemical impedance spectroscopy (EIS), and complex non-linear least squares fitting (CNLS). Information on the number of contributing processes....... The proposed electrochemical analysis correlated well with the exhibited microstructural features of the cells, which were produced with different compositions and/or production parameters. (C) 2011 The Electrochemical Society. [DOI: 10.1149/1.3587113] All rights reserved....

Microstructural degradation of Ni-YSZ anodes for solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Thyden, K.

2008-03-15

Ni-YSZ cermets have been used as anode materials in SOFCs for more than 20 years. Despite this fact, the major cause of degradation within the Ni-YSZ anode, namely Ni sintering / coarsening, is still not fully understood. Even if microstructural studies of anodes in tested cells are of technological relevance, it is difficult to identify the effect from isolated parameters such as temperature, fuel gas composition and polarization. Model studies of high temperature aged Ni-YSZ cermets are generally performed in atmospheres containing relatively low concentrations of H2O. In this work, the microstructural degradation in both electrochemically longterm tested cells and high-temperature aged model materials are studied. Since Ni particle sintering / coarsening is attributed to be the major cause of anode degradation, this subject attains the primary focus. A large part of the work is focused on improving microstructural techniques and shows that the application of low acceleration voltages (<= 1 kV) in a FE-SEM makes it possible to obtain two useful types of contrast between the phases in Ni-YSZ composites. By changing between the ordinary lateral SE detector and the inlens detector, using similar microscope settings, two very different sample characteristics are probed: 1) The difference in secondary emission coefficient, delta, between the percolating and non-percolating Ni is maximized in the low-voltage range due to a high delta for the former and the suppression of delta by a positive charge for the latter. This difference yields a contrast between the two phases which is picked up by an inlens secondary electron detector. 2) The difference in backscatter coefficient, eta, between Ni and YSZ is shown to increase with decreasing voltage. The contrast is illustrated in images collected by the normal secondary detector since parts of the secondary signals are generated by backscattered electrons. High temperature aging experiments of model Ni-YSZ anode cermets show

A comparison of the value relevance of interim and annual financial statements

Directory of Open Access Journals (Sweden)

Mbalenhle Zulu

2017-03-01

Aim: It explores whether the value relevance of interim financial statements is higher than the value relevance of annual financial statements. Finally, it investigates whether accounting information published in interim and annual financial statements has incremental value relevance. Setting: Data for the period from 1999 to 2012 were collected from a sample of non-financial companies listed on the Johannesburg Stock Exchange. Method: The Ohlson model to investigate the value relevance of accounting information was used for the study. Results: The results show that interim book value of equity is value relevant while interim earnings are not. Interim financial statements appear to have higher value relevance than annual financial statements. The value relevance of interim and annual accounting information has remained fairly constant over the sample period. Incremental comparisons provide evidence that additional book value of equity and earnings that accrue to a company between interim and annual reporting dates are value relevant. Conclusion: The study was conducted over a long sample period (1999–2012, in an era when a technology-driven economy and more timely reporting media could have had an effect on the value relevance of published accounting information. To the best of our knowledge, this is the first study to evaluate and compare the value relevance of published interim and annual financial statements.

Microstructures of poly(N-methylpyrrole) and their interaction with morphine

Energy Technology Data Exchange (ETDEWEB)

Teixeira-Dias, Bruno [Departament d' Enginyeria Quimica, ETSEIB, Universitat Politecnica de Catalunya, Av. Diagonal 647, 08028, Barcelona (Spain); Center for Research in Nanoengineering, Universitat Politecnica de Catalunya, Campus Sud, Edifici C' , C/Pasqual i Vila s/n, 08028, Barcelona (Spain); Aleman, Carlos, E-mail: carlos.aleman@upc.edu [Departament d' Enginyeria Quimica, ETSEIB, Universitat Politecnica de Catalunya, Av. Diagonal 647, 08028, Barcelona (Spain); Center for Research in Nanoengineering, Universitat Politecnica de Catalunya, Campus Sud, Edifici C' , C/Pasqual i Vila s/n, 08028, Barcelona (Spain); Estrany, Francesc [Center for Research in Nanoengineering, Universitat Politecnica de Catalunya, Campus Sud, Edifici C' , C/Pasqual i Vila s/n, 08028, Barcelona (Spain); Unitat de Quimica Industrial, EUETIB, Universitat Politecnica de Catalunya, Comte d' Urgell 187, 08036, Barcelona (Spain); Azambuja, Denise S. [Institute of Chemistry, Universidade Federal do Rio Grande do Sul, Av. Bento Goncalves 9500 - CEP 91501-970, Porto Alegre, RS (Brazil); Armelin, Elaine, E-mail: elaine.armelin@upc.edu [Departament d' Enginyeria Quimica, ETSEIB, Universitat Politecnica de Catalunya, Av. Diagonal 647, 08028, Barcelona (Spain); Center for Research in Nanoengineering, Universitat Politecnica de Catalunya, Campus Sud, Edifici C' , C/Pasqual i Vila s/n, 08028, Barcelona (Spain)

2011-06-30

Graphical abstract: . Display Omitted Highlights: > Poly(N-methylpyrrole)/poly(styrenesulfonic acid) hollow microstructures has been prepared using gas templates. > The dimensions, abundance and texture of the microstructures have been electrochemically controlled. > Poly(N-methylpyrrole)/poly(styrenesulfonic acid) microstructures act as efficient morphine sensors. - Abstract: Microstructures of poly(N-methylpyrrole) have been generated by direct electrochemical oxidation of N-methylpyrrole with poly(styrenesulfonic acid) in aqueous solution, using a micelle formation mechanism with gas bubble templates. These microstructures present a 'doughnut'-like morphology with diameters ranging from 20 to 100 {mu}m. Other anionic surfactants, such as camphorsulfonic acid and {beta}-naphthalenesulfonic acid, have been also employed, results evidencing that the morphology of the microstructures depends on the nature of the surfactant electrolytes. The dimensions, abundance and texture of the microstructures have been modulated by varying the surfactant molecules, the electrochemical technique, and the distance between the working and counter-electrode. The generated microstructures have been characterized using electrochemical techniques, Raman and infrared spectroscopies, scanning electron microscopy and atomic force microscopy. Hollow microstructures-containing films made of poly(N-methylpyrrole)/poly(styrenesulfonic acid), which present remarkable electroactivity and electrostability, has been proved to interact with morphine molecules. Thus, systems based on this prominent material show a high ability to capture the drug molecules and to retain them for a long period of time.

Tissue microstructure estimation using a deep network inspired by a dictionary-based framework.

Science.gov (United States)

Ye, Chuyang

2017-12-01

Diffusion magnetic resonance imaging (dMRI) captures the anisotropic pattern of water displacement in the neuronal tissue and allows noninvasive investigation of the complex tissue microstructure. A number of biophysical models have been proposed to relate the tissue organization with the observed diffusion signals, so that the tissue microstructure can be inferred. The Neurite Orientation Dispersion and Density Imaging (NODDI) model has been a popular choice and has been widely used for many neuroscientific studies. It models the diffusion signal with three compartments that are characterized by distinct diffusion properties, and the parameters in the model describe tissue microstructure. In NODDI, these parameters are estimated in a maximum likelihood framework, where the nonlinear model fitting is computationally intensive. Therefore, efforts have been made to develop efficient and accurate algorithms for NODDI microstructure estimation, which is still an open problem. In this work, we propose a deep network based approach that performs end-to-end estimation of NODDI microstructure, which is named Microstructure Estimation using a Deep Network (MEDN). MEDN comprises two cascaded stages and is motivated by the AMICO algorithm, where the NODDI microstructure estimation is formulated in a dictionary-based framework. The first stage computes the coefficients of the dictionary. It resembles the solution to a sparse reconstruction problem, where the iterative process in conventional estimation approaches is unfolded and truncated, and the weights are learned instead of predetermined by the dictionary. In the second stage, microstructure properties are computed from the output of the first stage, which resembles the weighted sum of normalized dictionary coefficients in AMICO, and the weights are also learned. Because spatial consistency of diffusion signals can be used to reduce the effect of noise, we also propose MEDN+, which is an extended version of MEDN. MEDN

Unique microstructure and excellent mechanical properties of ADI

Directory of Open Access Journals (Sweden)

Jincheng Liu

2006-11-01

Full Text Available Amongst the cast iron family, ADI has a unique microstructure and an excellent, optimised combination of mechanical properties. The main microstructure of ADI is ausferrite, which is a mixture ofextremely fine acicular ferrite and stable, high carbon austenite. There are two types of austenite in ADI:(1 the coarser and more equiaxed blocks of austenite between non-parallel acicular structures, which exist mainly in the last solidified area, and (2 the thin films of ustenite between the individual ferriteplatelets in the acicular structure. It is this unique microstructure, which gives ADI its excellent static and dynamic properties, and good low temperature impact toughness. The effect of microstructure on the mechanical properties is explained in more detail by examining the microstructure at the atomic scale. Considering the nanometer grain sizes, the unique microstructure, the excellent mechanical properties,good castability, (which enables near net shape components to be produced economically and in large volumes, and the fact that it can be 100% recycled, it is not overemphasized to call ADI a high-tech,nanometer and “green” material. ADI still has the potential to be further improved and its production and the number of applications for ADI will continue to grow, driven by the resultant cost savings over alternative materials.

Microstructures and superplasticity in near-gamma titanium aluminide alloys

International Nuclear Information System (INIS)

Bampton, C.C.; Martin, P.L.

1993-01-01

Microstructure control by thermomechanical processing in near-gamma titanium aluminide alloys has recently progressed to a point where the authors are able to reliably produce a wide range of microstructures in a single alloy. The authors are now studying the basic superplastic deformation microstructures. Correlations are made between microstructural details and flow stress, strain hardening, strain-rate hardening, necking, cavitation and failure. Special emphasis is given to the cavitation behavior since this phenomenon may constitute a major limitation to the useful application of superplastic forming for gamma TiAl structures

A microstructured Polymer Optical Fiber Biosensor

DEFF Research Database (Denmark)

Emiliyanov, Grigoriy Andreev; Jensen, Jesper Bo; Hoiby, Poul E.

2006-01-01

We demonstrate selective detection of fluorophore labeled antibodies from minute samples probed by a sensor layer of the complementary biomolecules immobilized inside the air holes of microstructured Polymer Optical Fibers.......We demonstrate selective detection of fluorophore labeled antibodies from minute samples probed by a sensor layer of the complementary biomolecules immobilized inside the air holes of microstructured Polymer Optical Fibers....

Surface Microstructure Replication in Injection Moulding

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Arlø, Uffe Rolf

2005-01-01

topography is transcribed onto the plastic part through complex mechanisms. This replication however, is not perfect, and the replication quality depends on the plastic material properties, the topography itself, and the process conditions. This paper describes and discusses an investigation of injection...... moulding of surface microstructures. Emphasis is put on the ability to replicate surface microstructures under normal injection moulding conditions, notably with low cost materials at low mould temperatures. The replication of surface microstructures in injection moulding has been explored...... for Polypropylene at low mould temperatures. The process conditions were varied over the recommended process window for the material. The geometry of the obtained structures was analyzed. Evidence suggests that step height replication quality depends linearly on structure width in a certain range. Further...

Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review

Science.gov (United States)

Wanare, S. P.; Kalyankar, V. D.

2018-04-01

Friction stir welding is emerging as a promising technique for joining of lighter metal alloys due to its several advantages over conventional fusion welding processes such as low thermal distortion, good mechanical properties, fine weld joint microstructure, etc. This review article mainly focuses on analysis of microstructure and mechanical properties of friction stir welded joints. Various microstructure characterization techniques used by previous researchers such as optical microscopes, x-ray diffraction, electron probe microscope, transmission electron microscope, scanning electron microscopes with electron back scattered diffraction, electron dispersive microscopy, etc. are thoroughly overviewed and their results are discussed. The effects of friction stir welding process parameters such as tool rotational speed, welding speed, tool plunge depth, axial force, tool shoulder diameter to tool pin diameter ratio, tool geometry etc. on microstructure and mechanical properties of welded joints are studied and critical observations are noted down. The microstructure examination carried out by previous researchers on various zones of welded joints such as weld zone, heat affected zone and base metal are studied and critical remarks have been presented. Mechanical performances of friction stir welded joints based on tensile test, micro-hardness test, etc. are discussed. This article includes exhaustive literature review of standard research articles which may become ready information for subsequent researchers to establish their line of action.

Modeling the microstructural evolution during constrained sintering

DEFF Research Database (Denmark)

Bjørk, Rasmus; Frandsen, Henrik Lund; Tikare, V.

A numerical model able to simulate solid state constrained sintering of a powder compact is presented. The model couples an existing kinetic Monte Carlo (kMC) model for free sintering with a finite element (FE) method for calculating stresses on a microstructural level. The microstructural response...... to the stress field as well as the FE calculation of the stress field from the microstructural evolution is discussed. The sintering behavior of two powder compacts constrained by a rigid substrate is simulated and compared to free sintering of the same samples. Constrained sintering result in a larger number...

Hardmetals - microstructural design, testing and property maps

Energy Technology Data Exchange (ETDEWEB)

Roebuck, B; Gee, M G; Morrell, R [NPL Materials Centre, National Physical Laboratory, Teddington, Middlesex (United Kingdom)

2001-07-01

The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

Hardmetals - microstructural design, testing and property maps

International Nuclear Information System (INIS)

Roebuck, B.; Gee, M.G.; Morrell, R.

2001-01-01

The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

Developing strong concurrent multiphysics multiscale coupling to understand the impact of microstructural mechanisms on the structural scale

Energy Technology Data Exchange (ETDEWEB)

Foulk, James W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Alleman, Coleman N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mota, Alejandro [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lim, Hojun [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Littlewood, David John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bergel, Guy Leshem [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Popova, Evdokia [Georgia Inst. of Technology, Atlanta, GA (United States). Woodruff School of Mechanical Engineering; Montes de Oca Zapiain, David [Georgia Inst. of Technology, Atlanta, GA (United States). Woodruff School of Mechanical Engineering; Kalidindi, Suryanarayana Raju [Georgia Inst. of Technology, Atlanta, GA (United States). Woodruff School of Mechanical Engineering; Ernst, Corey [Elemental Technologies, Provo, UT (United States)

2017-09-01

The heterogeneity in mechanical fields introduced by microstructure plays a critical role in the localization of deformation. To resolve this incipient stage of failure, it is therefore necessary to incorporate microstructure with sufficient resolution. On the other hand, computational limitations make it infeasible to represent the microstructure in the entire domain at the component scale. In this study, the authors demonstrate the use of concurrent multi- scale modeling to incorporate explicit, finely resolved microstructure in a critical region while resolving the smoother mechanical fields outside this region with a coarser discretization to limit computational cost. The microstructural physics is modeled with a high-fidelity model that incorporates anisotropic crystal elasticity and rate-dependent crystal plasticity to simulate the behavior of a stainless steel alloy. The component-scale material behavior is treated with a lower fidelity model incorporating isotropic linear elasticity and rate-independent J 2 plas- ticity. The microstructural and component scale subdomains are modeled concurrently, with coupling via the Schwarz alternating method, which solves boundary-value problems in each subdomain separately and transfers solution information between subdomains via Dirichlet boundary conditions. Beyond cases studies in concurrent multiscale, we explore progress in crystal plastic- ity through modular designs, solution methodologies, model verification, and extensions to Sierra/SM and manycore applications. Advances in conformal microstructures having both hexahedral and tetrahedral workflows in Sculpt and Cubit are highlighted. A structure-property case study in two-phase metallic composites applies the Materials Knowledge System to local metrics for void evolution. Discussion includes lessons learned, future work, and a summary of funded efforts and proposed work. Finally, an appendix illustrates the need for two-way coupling through a single degree of

Non-destructive microstructural analysis with depth resolution

Energy Technology Data Exchange (ETDEWEB)

Zolotoyabko, E. E-mail: zloto@tx.technion.ac.il; Quintana, J.P

2003-01-01

A depth-sensitive X-ray diffraction technique has been developed with the aim of studying microstructural modifications in inhomogeneous polycrystalline materials. In that method, diffraction profiles are measured at different X-ray energies varied by small steps. X-rays at higher energies probe deeper layers of material. Depth-resolved structural information is retrieved by comparing energy-dependent diffraction profiles. The method provides non-destructive depth profiling of the preferred orientation, grain size, microstrain fluctuations and residual strains. This technique is applied to the characterization of seashells. Similarly, energy-variable X-ray diffraction can be used for the non-destructive characterization of different laminated structures and composite materials.

Structural and microstructural design in brittle materials

International Nuclear Information System (INIS)

Evans, A.G.

1979-12-01

Structural design with brittle materials requires that the stress level in the component correspond to a material survival probability that exceeds the minimum survival probability permitted in that application. This can be achieved by developing failure models that fully account for the probability of fracture from defects within the material (including considerations of fracture statistics, fracture mechanics and stress analysis) coupled with non-destructive techniques that determine the size of the large extreme of critical defects. Approaches for obtaining the requisite information are described. The results provide implications for the microstructural design of failure resistant brittle materials by reducing the size of deleterious defects and enhancing the fracture toughness

The Relevant Physical Trace in Criminal Investigation

Directory of Open Access Journals (Sweden)

Durdica Hazard

2016-01-01

Full Text Available A criminal investigation requires the forensic scientist to search and to interpret vestiges of a criminal act that happened in the past. The forensic scientist is one of the many stakeholders who take part in the information quest within the criminal justice system. She reads the investigation scene in search of physical traces that should enable her to tell the story of the offense/crime that allegedly occurred. The challenge for any investigator is to detect and recognize relevant physical traces in order to provide clues for investigation and intelligence purposes, and that will constitute sound and relevant evidence for the court. This article shows how important it is to consider the relevancy of physical traces from the beginning of the investigation and what might influence the evaluation process. The exchange and management of information between the investigation stakeholders are important. Relevancy is a dimension that needs to be understood from the standpoints of law enforcement personnel and forensic scientists with the aim of strengthening investigation and ultimately the overall judicial process.

Improving Nigerian health policymakers' capacity to access and utilize policy relevant evidence: outcome of information and communication technology training workshop.

Science.gov (United States)

Uneke, Chigozie Jesse; Ezeoha, Abel Ebeh; Uro-Chukwu, Henry; Ezeonu, Chinonyelum Thecla; Ogbu, Ogbonnaya; Onwe, Friday; Edoga, Chima

2015-01-01

Information and communication technology (ICT) tools are known to facilitate communication and processing of information and sharing of knowledge by electronic means. In Nigeria, the lack of adequate capacity on the use of ICT by health sector policymakers constitutes a major impediment to the uptake of research evidence into the policymaking process. The objective of this study was to improve the knowledge and capacity of policymakers to access and utilize policy relevant evidence. A modified "before and after" intervention study design was used in which outcomes were measured on the target participants both before the intervention is implemented and after. A 4-point likert scale according to the degree of adequacy; 1 = grossly inadequate, 4 = very adequate was employed. This study was conducted in Ebonyi State, south-eastern Nigeria and the participants were career health policy makers. A two-day intensive ICT training workshop was organized for policymakers who had 52 participants in attendance. Topics covered included: (i). intersectoral partnership/collaboration; (ii). Engaging ICT in evidence-informed policy making; use of ICT for evidence synthesis; (iv) capacity development on the use of computer, internet and other ICT. The pre-workshop mean of knowledge and capacity for use of ICT ranged from 2.19-3.05, while the post-workshop mean ranged from 2.67-3.67 on 4-point scale. The percentage increase in mean of knowledge and capacity at the end of the workshop ranged from 8.3%-39.1%. Findings of this study suggest that policymakers' ICT competence relevant to evidence-informed policymaking can be enhanced through training workshop.

Performance degradation and microstructure changes in freeze-thaw cycling for PEMFC MEAs with various initial microstructures

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang-Yeop; Kim, Hyoung-Juhn; Cho, EunAe; Lee, Kug-Seung; Lim, Tae-Hoon; Jang, Jong Hyun [Fuel Cell Center, Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Hwang, In Chul [Corporate Research and Development Division, Hyundai-Kia Motors, Gyeonggi-do 446-912 (Korea, Republic of)

2010-12-15

When the temperature of a fuel cell vehicle is repeatedly reduced to subzero temperatures, volume changes by water/ice transformations and frost heave mechanism can cause microstructural changes in membrane-electrode assemblies (MEA), and a resultant permanent decrease in the performance of fuel cell stacks. In this study, five MEAs manufactured by different methods, were tested under repeated freeze-thaw (F-T) cycles between -20 C and 10 C, and the variations in their electrochemical and microstructural characteristics were analyzed according to the initial microstructures. When the MEAs were prepared by spraying catalyst inks on polymer membranes, no significant microstructural changes were observed. In the case of two supplied MEAs, void formations at the electrolyte/electrode interface or vertical cracks within the catalyst layers were observed after 120 F-T cycles. Void formation seems to be responsible for performance degradation as a result of ohmic loss, but the effect of cracks in the catalyst layers was not confirmed. In 120 F-T cycles, activation overpotentials and concentration overpotentials did not increase significantly for any of the MEAs, even although gradual decreases in the electrochemically active surface area of the platinum catalysts and changes in the porous structure were observed. (author)

Contrasting light spectra constrain the macro and microstructures of scleractinian corals.

Directory of Open Access Journals (Sweden)

Rui J M Rocha

Full Text Available The morphological plasticity of scleractinian corals can be influenced by numerous factors in their natural environment. However, it is difficult to identify in situ the relative influence of a single biotic or abiotic factor, due to potential interactions between them. Light is considered as a major factor affecting coral skeleton morphology, due to their symbiotic relation with photosynthetic zooxanthellae. Nonetheless, most studies addressing the importance of light on coral morphological plasticity have focused on photosynthetically active radiation (PAR intensity, with the effect of light spectra remaining largely unknown. The present study evaluated how different light spectra affect the skeleton macro- and microstructures in two coral species (Acropora formosa sensu Veron (2000 and Stylophora pistillata maintained under controlled laboratory conditions. We tested the effect of three light treatments with the same PAR but with a distinct spectral emission: 1 T5 fluorescent lamps with blue emission; 2 Light Emitting Diodes (LED with predominantly blue emission; and 3 Light Emitting Plasma (LEP with full spectra emission. To exclude potential bias generated by genetic variability, the experiment was performed with clonal fragments for both species. After 6 months of experiment, it was possible to detect in coral fragments of both species exposed to different light spectra significant differences in morphometry (e.g., distance among corallites, corallite diameter, and theca thickness, as well as in the organization of their skeleton microstructure. The variability found in the skeleton macro- and microstructures of clonal organisms points to the potential pitfalls associated with the exclusive use of morphometry on coral taxonomy. Moreover, the identification of a single factor influencing the morphology of coral skeletons is relevant for coral aquaculture and can allow the optimization of reef restoration efforts.

Contrasting light spectra constrain the macro and microstructures of scleractinian corals.

Science.gov (United States)

Rocha, Rui J M; Silva, Ana M B; Fernandes, M Helena Vaz; Cruz, Igor C S; Rosa, Rui; Calado, Ricardo

2014-01-01

The morphological plasticity of scleractinian corals can be influenced by numerous factors in their natural environment. However, it is difficult to identify in situ the relative influence of a single biotic or abiotic factor, due to potential interactions between them. Light is considered as a major factor affecting coral skeleton morphology, due to their symbiotic relation with photosynthetic zooxanthellae. Nonetheless, most studies addressing the importance of light on coral morphological plasticity have focused on photosynthetically active radiation (PAR) intensity, with the effect of light spectra remaining largely unknown. The present study evaluated how different light spectra affect the skeleton macro- and microstructures in two coral species (Acropora formosa sensu Veron (2000) and Stylophora pistillata) maintained under controlled laboratory conditions. We tested the effect of three light treatments with the same PAR but with a distinct spectral emission: 1) T5 fluorescent lamps with blue emission; 2) Light Emitting Diodes (LED) with predominantly blue emission; and 3) Light Emitting Plasma (LEP) with full spectra emission. To exclude potential bias generated by genetic variability, the experiment was performed with clonal fragments for both species. After 6 months of experiment, it was possible to detect in coral fragments of both species exposed to different light spectra significant differences in morphometry (e.g., distance among corallites, corallite diameter, and theca thickness), as well as in the organization of their skeleton microstructure. The variability found in the skeleton macro- and microstructures of clonal organisms points to the potential pitfalls associated with the exclusive use of morphometry on coral taxonomy. Moreover, the identification of a single factor influencing the morphology of coral skeletons is relevant for coral aquaculture and can allow the optimization of reef restoration efforts.

Effects of white matter microstructure on phase and susceptibility maps.

Science.gov (United States)

Wharton, Samuel; Bowtell, Richard

2015-03-01

To investigate the effects on quantitative susceptibility mapping (QSM) and susceptibility tensor imaging (STI) of the frequency variation produced by the microstructure of white matter (WM). The frequency offsets in a WM tissue sample that are not explained by the effect of bulk isotropic or anisotropic magnetic susceptibility, but rather result from the local microstructure, were characterized for the first time. QSM and STI were then applied to simulated frequency maps that were calculated using a digitized whole-brain, WM model formed from anatomical and diffusion tensor imaging data acquired from a volunteer. In this model, the magnitudes of the frequency contributions due to anisotropy and microstructure were derived from the results of the tissue experiments. The simulations suggest that the frequency contribution of microstructure is much larger than that due to bulk effects of anisotropic magnetic susceptibility. In QSM, the microstructure contribution introduced artificial WM heterogeneity. For the STI processing, the microstructure contribution caused the susceptibility anisotropy to be significantly overestimated. Microstructure-related phase offsets in WM yield artifacts in the calculated susceptibility maps. If susceptibility mapping is to become a robust MRI technique, further research should be carried out to reduce the confounding effects of microstructure-related frequency contributions. © 2014 Wiley Periodicals, Inc.

In-Situ Roughening of Polymeric Microstructures

Science.gov (United States)

Shadpour, Hamed; Allbritton, Nancy L.

2010-01-01

A method to perform in-situ roughening of arrays of microstructures weakly adherent to an underlying substrate was presented. SU8, 1002F, and polydimethylsiloxane (PDMS) microstructures were roughened by polishing with a particle slurry. The roughness and the percentage of dislodged or damaged microstructures was evaluated as a function of the roughening time for both SU8 and 1002F structures. A maximal RMS roughness of 7-18 nm for the surfaces was obtained within 15 to 30 s of polishing with the slurry. This represented a 4-9 fold increase in surface roughness relative to that of the native surface. Less than 0.8% of the microstructures on the array were removed or damage after 5 min of polishing. Native and roughened arrays were assessed for their ability to support fibronectin adhesion and cell attachment and growth. The quantity of adherent fibronectin was increased on roughened arrays by two-fold over that on native arrays. Cell adhesion to the roughened surfaces was also increased compared to native surfaces. Surface roughening with the particle slurry also improved the ability to stamp molecules onto the substrate during microcontact printing. Roughening both the PDMS stamp and substrate resulted in up to a 20-fold improvement in the transfer of BSA-Alexa Fluor 647 from the stamp to the substrate. Thus roughening of micron-scale surfaces with a particle slurry increased the adhesion of biomolecules as well as cells to microstructures with little to no damage to large scale arrays of the structures. PMID:20423129

Benchmarking and Its Relevance to the Library and Information Sector. Interim Findings of "Best Practice Benchmarking in the Library and Information Sector," a British Library Research and Development Department Project.

Science.gov (United States)

Kinnell, Margaret; Garrod, Penny

This British Library Research and Development Department study assesses current activities and attitudes toward quality management in library and information services (LIS) in the academic sector as well as the commercial/industrial sector. Definitions and types of benchmarking are described, and the relevance of benchmarking to LIS is evaluated.…

Evaluation of the Performance and Microstructure of Ecofriendly Construction Bricks Made with Fly Ash and Residual Rice Husk Ash

Directory of Open Access Journals (Sweden)

Chao-Lung Hwang

2015-01-01

Full Text Available This research presents the engineering performance and the microstructural characterization of ecofriendly construction bricks that were produced using a binder material made from a mixture of class-F fly ash (FA and residual rice husk ash (RHA. Unground rice husk ash (URHA was used as a partial fine aggregate substitute (0–40%. The solid bricks of 220 × 105 × 60 mm in size were prepared by mixing FA and RHA with an alkaline solution and fine aggregates, formed by compressing the mixture in a steel mold under 35 MPa of forming pressure, and then cured at 35°C and 50% relative humidity until the required testing ages. The tests of compressive strength, water absorption, and bulk density were conducted in accordance with relevant Vietnamese standards in order to estimate the effect of the URHA content on the engineering performance of the hardened bricks. Scanning electron microscopy (SEM, X-ray diffraction (XRD, and Fourier transform infrared spectroscopy (FTIR were performed to determine the microstructure and the phase composition of the brick samples. The results show that properties of these bricks conformed to relevant Vietnamese standards. Therefore, FA and RHA are potential candidate materials for producing ecofriendly construction bricks using geopolymerization technology.

Three-dimensional selective growth of nanoparticles on a polymer microstructure

International Nuclear Information System (INIS)

Wu Shaomin; Han, L-H; Chen Shaochen

2009-01-01

We demonstrate a new technique for selectively growing gold nanoparticles on a patterned three-dimensional (3D) polymer microstructure. The technique integrates 3D direct writing of heterogeneous microstructures with nanoparticle synthesis. A digital micromirror device is employed as a dynamic mask in the digital projection photopolymerization process to build the heterogeneous microstructure layer by layer. An amine-bearing polyelectrolyte, branched poly(ethylenimine), is selectively attached to the microstructure and acts as both a reducing and a protective agent in the nanoparticle synthesis. Scanning electron microscopy, energy dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy are utilized to analyze the microstructure and the 3D selectivity of the nanoparticle growth.

Unconventional barometry and rheometry: new quantification approaches for mechanically-controlled microstructures

Science.gov (United States)

Tajcmanova, L.; Moulas, E.; Vrijmoed, J.; Podladchikov, Y.

2016-12-01

Estimation of pressure-temperature (P-T) from petrographic observations in metamorphic rocks has become a common practice in petrology studies during the last 50 years. This data often serves as a key input in geodynamic reconstructions and thus directly influences our understanding of lithospheric processes. Such an approach might have led the metamorphic geology field to a certain level of quiescence. In the classical view of metamorphic quantification approaches, fast viscous relaxation (and therefore constant pressure across the rock microstructure) is assumed, with chemical diffusion being the limiting factor in equilibration. Recently, we have focused on the other possible scenario - fast chemical diffusion and slow viscous relaxation - and brings an alternative interpretation of chemical zoning found in high-grade rocks. The aim has been to provide insight into the role of mechanically maintained pressure variations on multi-component chemical zoning in minerals. Furthermore, we used the pressure information from the mechanically-controlled microstructure for rheological constrains. We show an unconventional way of relating the direct microstructural observations in rocks to the nonlinearity of rheology at time scales unattainable by laboratory measurements. Our analysis documents that mechanically controlled microstructures that have been preserved over geological times can be used to deduce flow-law parameters and in turn estimate stress levels of minerals in their natural environment. The development of the new quantification approaches has opened new horizons in understanding the phase transformations in the Earth's lithosphere. Furthermore, the new data generated can serve as a food for thought for the next generation of fully coupled numerical codes that involve reacting materials while respecting conservation of mass, momentum and energy.

Microstructure Of A SIC/(Ti/V/Cr/Sn/Al) Composite

Science.gov (United States)

Lerch, Bradley A.; Hull, David R.; Leonhardt, Todd A.

1990-01-01

NASA technical memorandum reports on analysis of composite material made of SiC fibers in matrix of 0.76 Ti/0.15 V/0.03 Cr/0.03 Sn/0.03 Al (parts by weight) alloy. Purposes of study to investigate suitability of some metallographic techniques for use on composite materials in general and to obtain information about macrostructure and microstructure of this specific composite to provide guidance for experimental and theoretical studies of more advanced composites.

Android Smartphone Relevance to Military Weather Applications

Science.gov (United States)

2011-10-01

lithium -ion battery that may be replaced by the user (unlike Apple iPod Touch devices), thus spare batteries can be carried. If there is only sporadic...Android Smartphone Relevance to Military Weather Applications by David Sauter ARL-TR-5793 October 2011...Android Smartphone Relevance to Military Weather Applications David Sauter Computational and Information Sciences Directorate, ARL

Investigations on the microstructure and mechanical properties

Indian Academy of Sciences (India)

This paper addresses the weldability, microstructure and mechanical properties of the multi-pass welding of super-duplex stainless steel (SDSS). Pulsed current gas tungsten arc welding (PCGTAW) was carried out employing ER2553 and ERNiCrMo-4 fillers. Microstructure examination showed the presence of austenite in ...

Microstructural evolution of castable during firing

International Nuclear Information System (INIS)

Santos, E.M.B.; Ribeiro, S.

2011-01-01

Castable are materials used for high temperature industrial applications, containing one or more binding agents, aggregates and additives. Calcium aluminate cement (CAC) is one of the most used binding agents, mainly due to his abundance, low cost, refractoriness and high mechanical and chemical resistance. During high temperature processes, these materials exhibit microstructural evolution that changes their properties and affect the performance. The purpose of this work was to study the microstructural changes presented by a castable, containing CAC and alumina aggregates, during heat treatment. For that, was used X-ray diffraction, thermal analyses, electron microscopy and energy dispersive spectroscopy to characterize concretes after heat treatment up to 1000 deg C. The results allowed to understand the microstructural changes at high temperature and its influence in mechanical properties of the castable. (author)

Improving information access by relevance and topical feedback

NARCIS (Netherlands)

Kaptein, R.; Kamps, J.; Hopfgartner, F.

2008-01-01

One of the main bottle-necks in providing more effective information access is the poverty of the query end. With an average query length of about two terms, users provide only a highly ambiguous statement of the, often complex, underlying information need. Implicit and explicit feedback can provide

A Hybrid Approach to Finding Relevant Social Media Content for Complex Domain Specific Information Needs.

Science.gov (United States)

Cameron, Delroy; Sheth, Amit P; Jaykumar, Nishita; Thirunarayan, Krishnaprasad; Anand, Gaurish; Smith, Gary A

2014-12-01

While contemporary semantic search systems offer to improve classical keyword-based search, they are not always adequate for complex domain specific information needs. The domain of prescription drug abuse, for example, requires knowledge of both ontological concepts and "intelligible constructs" not typically modeled in ontologies. These intelligible constructs convey essential information that include notions of intensity, frequency, interval, dosage and sentiments, which could be important to the holistic needs of the information seeker. In this paper, we present a hybrid approach to domain specific information retrieval that integrates ontology-driven query interpretation with synonym-based query expansion and domain specific rules, to facilitate search in social media on prescription drug abuse. Our framework is based on a context-free grammar (CFG) that defines the query language of constructs interpretable by the search system. The grammar provides two levels of semantic interpretation: 1) a top-level CFG that facilitates retrieval of diverse textual patterns, which belong to broad templates and 2) a low-level CFG that enables interpretation of specific expressions belonging to such textual patterns. These low-level expressions occur as concepts from four different categories of data: 1) ontological concepts, 2) concepts in lexicons (such as emotions and sentiments), 3) concepts in lexicons with only partial ontology representation, called lexico-ontology concepts (such as side effects and routes of administration (ROA)), and 4) domain specific expressions (such as date, time, interval, frequency and dosage) derived solely through rules. Our approach is embodied in a novel Semantic Web platform called PREDOSE, which provides search support for complex domain specific information needs in prescription drug abuse epidemiology. When applied to a corpus of over 1 million drug abuse-related web forum posts, our search framework proved effective in retrieving

Creep of Two-Phase Microstructures for Microelectronic Applications

Energy Technology Data Exchange (ETDEWEB)

Reynolds, Heidi Linch [Univ. of California, Berkeley, CA (United States)

1998-12-01

The mechanical properties of low-melting temperature alloys are highly influenced by their creep behavior. This study investigates the dominant mechanisms that control creep behavior of two-phase, low-melting temperature alloys as a function of microstructure. The alloy systems selected for study were In-Ag and Sn-Bi because their eutectic compositions represent distinctly different microstructure.” The In-Ag eutectic contains a discontinuous phase while the Sn-Bi eutectic consists of two continuous phases. In addition, this work generates useful engineering data on Pb-free alloys with a joint specimen geometry that simulates microstructure found in microelectronic applications. The use of joint test specimens allows for observations regarding the practical attainability of superplastic microstructure in real solder joints by varying the cooling rate. Steady-state creep properties of In-Ag eutectic, Sn-Bi eutectic, Sn-xBi solid-solution and pure Bi joints have been measured using constant load tests at temperatures ranging from O°C to 90°C. Constitutive equations are derived to describe the steady-state creep behavior for In-Ageutectic solder joints and Sn-xBi solid-solution joints. The data are well represented by an equation of the form proposed by Dom: a power-law equation applies to each independent creep mechanism. Rate-controlling creep mechanisms, as a function of applied shear stress, test temperature, and joint microstructure, are discussed. Literature data on the steady-state creep properties of Sn-Bi eutectic are reviewed and compared with the Sn-xBi solid-solution and pure Bi joint data measured in the current study. The role of constituent phases in controlling eutectic creep behavior is discussed for both alloy systems. In general, for continuous, two-phase microstructure, where each phase exhibits significantly different creep behavior, the harder or more creep resistant phase will dominate the creep behavior in a lamellar microstructure. If a

Modelling of deformation and recrystallisation microstructures in rocks and ice

Science.gov (United States)

Bons, Paul D.; Evans, Lynn A.; Gomez-Rivas, Enrique; Griera, Albert; Jessell, Mark W.; Lebensohn, Ricardo; Llorens, Maria-Gema; Peternell, Mark; Piazolo, Sandra; Weikusat, Ilka; Wilson, Chris J. L.

2015-04-01

Microstructures both record the deformation history of a rock and strongly control its mechanical properties. As microstructures in natural rocks only show the final "post-mortem" state, geologists have attempted to simulate the development of microstructures with experiments and later numerical models. Especially in-situ experiments have given enormous insight, as time-lapse movies could reveal the full history of a microstructure. Numerical modelling is an alternative approach to simulate and follow the change in microstructure with time, unconstrained by experimental limitations. Numerical models have been applied to a range of microstructural processes, such as grain growth, dynamic recrystallisation, porphyroblast rotation, vein growth, formation of mylonitic fabrics, etc. The numerical platform "Elle" (www.elle.ws) in particular has brought progress in the simulation of microstructural development as it is specifically designed to include the competition between simultaneously operating processes. Three developments significantly improve our capability to simulate microstructural evolution: (1) model input from the mapping of crystallographic orientation with EBSD or the automatic fabric analyser, (2) measurement of grain size and crystallographic preferred orientation evolution using neutron diffraction experiments and (3) the implementation of the full-field Fast Fourier Transform (FFT) solver for modelling anisotropic crystal-plastic deformation. The latter enables the detailed modelling of stress and strain as a function of local crystallographic orientation, which has a strong effect on strain localisation such as, for example, the formation of shear bands. These models can now be compared with the temporal evolution of crystallographic orientation distributions in in-situ experiments. In the last decade, the possibility to combine experiments with numerical simulations has allowed not only verification and refinement of the numerical simulation

Local microstructure and flow stress in deformed metals

DEFF Research Database (Denmark)

Zhang, Xiaodan; Hansen, Niels; Nielsen, Chris Valentin

2017-01-01

The microstructure and flow stress of metals are related through many well-known strength-structure relationships based on structural parameters, where grain size and dislocation density are examples. In heterogeneous structures, the local stress and strain are important as they will affect...... the bulk properties. A microstructural method is presented which allows the local stress in a deformed metal to be estimated based on microstructural parameters determined by an EBSD analysis. These parameters are the average spacing of deformation introduced boundaries and the fraction of high angle...... boundaries. The method is demonstrated for two heterogeneous structures: (i) a gradient (sub)surface structure in steel deformed by shot peening; (ii) a heterogeneous structure introduced by friction between a tool and a workpiece of aluminum. Flow stress data are calculated based on the microstructural...

Monitoring temporal microstructural variations of skeletal muscle tissues by multispectral Mueller matrix polarimetry

Science.gov (United States)

Dong, Yang; He, Honghui; He, Chao; Ma, Hui

2017-02-01

Mueller matrix polarimetry is a powerful tool for detecting microscopic structures, therefore can be used to monitor physiological changes of tissue samples. Meanwhile, spectral features of scattered light can also provide abundant microstructural information of tissues. In this paper, we take the 2D multispectral backscattering Mueller matrix images of bovine skeletal muscle tissues, and analyze their temporal variation behavior using multispectral Mueller matrix parameters. The 2D images of the Mueller matrix elements are reduced to the multispectral frequency distribution histograms (mFDHs) to reveal the dominant structural features of the muscle samples more clearly. For quantitative analysis, the multispectral Mueller matrix transformation (MMT) parameters are calculated to characterize the microstructural variations during the rigor mortis and proteolysis processes of the skeletal muscle tissue samples. The experimental results indicate that the multispectral MMT parameters can be used to judge different physiological stages for bovine skeletal muscle tissues in 24 hours, and combining with the multispectral technique, the Mueller matrix polarimetry and FDH analysis can monitor the microstructural variation features of skeletal muscle samples. The techniques may be used for quick assessment and quantitative monitoring of meat qualities in food industry.

Microstructure characterization of Cu processed by compression with oscillatory torsion

International Nuclear Information System (INIS)

Rodak, K.; Pawlicki, J.

2014-01-01

High purity Cu (99.9%) was subjected to severe plastic deformation up to a total effective strain ε ft = 130 through compression with the oscillatory torsion method at room temperature. This method produces an ultrafine grain microstructure. The microstructure evolution was investigated with respect to the value of the total effective strain using a scanning electron microscope with an electron-backscattered diffraction technique and a scanning transmission electron microscope. The results of the structural analyses show that increasing ε ft from 2 to 50 causes progress in the grain refinement. A quantitative study of the microstructure parameters, such as fraction of high angle boundaries, grain and subgrain diameter, and the area fraction of grains up to 1 μm, shows that deformation at ε ft = 45 guaranteed the best conditions for refining the microstructure of Cu. Using high values of ε ft in the range 60 to 130 restricts grain refinement because intensive recovery begins to dominate in the microstructure. - Highlights: • Cu was processed by SPD metodto an effective strain 130. • The microstructure evolution has been investigated. • The method allows to produce an ultrafine grain microstructure

Microstructure characterization of Cu processed by compression with oscillatory torsion

Energy Technology Data Exchange (ETDEWEB)

Rodak, K., E-mail: kinga.rodak@polsl.pl [Institute of Materials Science, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice (Poland); Pawlicki, J., E-mail: jacek.pawlicki@polsl.pl [Department of Automotive Vehicle Construction, Silesian University of Technology, Krasińskiego 8, 40–019 Katowice (Poland)

2014-08-15

High purity Cu (99.9%) was subjected to severe plastic deformation up to a total effective strain ε{sub ft} = 130 through compression with the oscillatory torsion method at room temperature. This method produces an ultrafine grain microstructure. The microstructure evolution was investigated with respect to the value of the total effective strain using a scanning electron microscope with an electron-backscattered diffraction technique and a scanning transmission electron microscope. The results of the structural analyses show that increasing ε{sub ft} from 2 to 50 causes progress in the grain refinement. A quantitative study of the microstructure parameters, such as fraction of high angle boundaries, grain and subgrain diameter, and the area fraction of grains up to 1 μm, shows that deformation at ε{sub ft} = 45 guaranteed the best conditions for refining the microstructure of Cu. Using high values of ε{sub ft} in the range 60 to 130 restricts grain refinement because intensive recovery begins to dominate in the microstructure. - Highlights: • Cu was processed by SPD metodto an effective strain 130. • The microstructure evolution has been investigated. • The method allows to produce an ultrafine grain microstructure.

The temporal-relevance temporal-uncertainty model of prospective duration judgment.

Science.gov (United States)

Zakay, Dan

2015-12-15

A model aimed at explaining prospective duration judgments in real life settings (as well as in the laboratory) is presented. The model is based on the assumption that situational meaning is continuously being extracted by humans' perceptual and cognitive information processing systems. Time is one of the important dimensions of situational meaning. Based on the situational meaning, a value for Temporal Relevance is set. Temporal Relevance reflects the importance of temporal aspects for enabling adaptive behavior in a specific moment in time. When Temporal Relevance is above a certain threshold a prospective duration judgment process is evoked automatically. In addition, a search for relevant temporal information is taking place and its outcomes determine the level of Temporal Uncertainty which reflects the degree of knowledge one has regarding temporal aspects of the task to be performed. The levels of Temporal Relevance and Temporal Uncertainty determine the amount of attentional resources allocated for timing by the executive system. The merit of the model is in connecting timing processes with the ongoing general information processing stream. The model rests on findings in various domains which indicate that cognitive-relevance and self-relevance are powerful determinants of resource allocation policy. The feasibility of the model is demonstrated by analyzing various temporal phenomena. Suggestions for further empirical validation of the model are presented. Copyright © 2015 Elsevier Inc. All rights reserved.

Dramatic lives and relevant becomings

DEFF Research Database (Denmark)

Henriksen, Ann-Karina; Miller, Jody

2012-01-01

of marginality into positions of relevance. The analysis builds on empirical data from Copenhagen, Denmark, gained through ethnographic fieldwork with the participation of 20 female informants aged 13–22. The theoretical contribution proposes viewing conflicts as multi-linear, multi-causal and non...

The effects of lossy compression on diagnostically relevant seizure information in EEG signals.

Science.gov (United States)

Higgins, G; McGinley, B; Faul, S; McEvoy, R P; Glavin, M; Marnane, W P; Jones, E

2013-01-01

This paper examines the effects of compression on EEG signals, in the context of automated detection of epileptic seizures. Specifically, it examines the use of lossy compression on EEG signals in order to reduce the amount of data which has to be transmitted or stored, while having as little impact as possible on the information in the signal relevant to diagnosing epileptic seizures. Two popular compression methods, JPEG2000 and SPIHT, were used. A range of compression levels was selected for both algorithms in order to compress the signals with varying degrees of loss. This compression was applied to the database of epileptiform data provided by the University of Freiburg, Germany. The real-time EEG analysis for event detection automated seizure detection system was used in place of a trained clinician for scoring the reconstructed data. Results demonstrate that compression by a factor of up to 120:1 can be achieved, with minimal loss in seizure detection performance as measured by the area under the receiver operating characteristic curve of the seizure detection system.

Nanomechanical Characterization of Temperature-Dependent Mechanical Properties of Ion-Irradiated Zirconium with Consideration of Microstructure and Surface Damage

Science.gov (United States)

Marsh, Jonathan; Zhang, Yang; Verma, Devendra; Biswas, Sudipta; Haque, Aman; Tomar, Vikas

2015-12-01

Zirconium alloys for nuclear applications with different microstructures were produced by manufacturing processes such as chipping, rolling and annealing. The two Zr samples, rolled and rolled-annealed were subjected to different levels of irradiation, 1 keV and 100 eV, to study the effect of irradiation dosages. The effect of microstructure and irradiation on the mechanical properties (reduced modulus, hardness, indentation yield strength) was analyzed with nanoindentation experiments, which were carried out in the temperature range of 25°C to 450°C to investigate temperature dependence. An indentation size effect analysis was performed and the mechanical properties were also corrected for the oxidation effects at high temperatures. The irradiation-induced hardness was observed, with rolled samples exhibiting higher increase compared to rolled and annealed samples. The relevant material parameters of the Anand viscoplastic model were determined for Zr samples containing different level of irradiation to account for viscoplasticity at high temperatures. The effect of the microstructure and irradiation on the stress-strain curve along with the influence of temperature on the mechanisms of irradiation creep such as formation of vacancies and interstitials is presented. The yield strength of irradiated samples was found to be higher than the unirradiated samples which also showed a decreasing trend with the temperature.

Microstructural evolution in inhomogeneous elastic media

International Nuclear Information System (INIS)

Jou, H.J.; Leo, P.H.; Lowengrub, J.S.

1997-01-01

We simulate the diffusional evolution of microstructures produced by solid state diffusional transformations in elastically stressed binary alloys in two dimensions. The microstructure consists of arbitrarily shaped precipitates embedded coherently in an infinite matrix. The precipitate and matrix are taken to be elastically isotropic, although they may have different elastic constants (elastically inhomogeneous). Both far-field applied strains and mismatch strains between the phases are considered. The diffusion and elastic fields are calculated using the boundary integral method, together with a small scale preconditioner to remove ill-conditioning. The precipitate-matrix interfaces are tracked using a nonstiff time updating method. The numerical method is spectrally accurate and efficient. Simulations of a single precipitate indicate that precipitate shapes depend strongly on the mass flux into the system as well as on the elastic fields. Growing shapes (positive mass flux) are dendritic while equilibrium shapes (zero mass flux) are squarish. Simulations of multiparticle systems show complicated interactions between precipitate morphology and the overall development of microstructure (i.e., precipitate alignment, translation, merging, and coarsening). In both single and multiple particle simulations, the details of the microstructural evolution depend strongly o the elastic inhomogeneity, misfit strain, and applied fields. 57 refs., 24 figs

Large-scale simulation of ductile fracture process of microstructured materials

International Nuclear Information System (INIS)

Tian Rong; Wang Chaowei

2011-01-01

The promise of computational science in the extreme-scale computing era is to reduce and decompose macroscopic complexities into microscopic simplicities with the expense of high spatial and temporal resolution of computing. In materials science and engineering, the direct combination of 3D microstructure data sets and 3D large-scale simulations provides unique opportunity for the development of a comprehensive understanding of nano/microstructure-property relationships in order to systematically design materials with specific desired properties. In the paper, we present a framework simulating the ductile fracture process zone in microstructural detail. The experimentally reconstructed microstructural data set is directly embedded into a FE mesh model to improve the simulation fidelity of microstructure effects on fracture toughness. To the best of our knowledge, it is for the first time that the linking of fracture toughness to multiscale microstructures in a realistic 3D numerical model in a direct manner is accomplished. (author)

The effect of inhomogeneity of microstructure on ducility in superplasticity

International Nuclear Information System (INIS)

Manonukul, A.; Dunne, F.P.E.

1996-01-01

Finite element cell models have been developed to represent inhomogeneous grain size fields that occur in commercial Ti-6Al-4V. The models are used to investigate the influence of microstructure on superplastic stress-strain behaviour, inhomogeneity of deformation, and on ductility in superplastic deformation. It is shown that increasing the level of initial microstructural inhomogeneity leads to increasing flow stress for given strain, and that the microstructural inhomogeneity leads to inhomogeneous deformation. As superplasticity proceeds, the level of microstructural inhomogeneity diminishes, but the inhomogeneity itself is preserved during the deformation. It is shown that the inhomogeneity of microstructure leads to strain localisation which increases in severity with deformation until material necking and failure occur. Increasing the initial microstructural inhomogeneity is shown to lead to a decrease in ductility, but the effect diminishes for grain size ranges in excess of 30 μm. An empirical relationship is presented that relates the ductility to the initial grain size range through a power law. (orig.)

Realized Variance and Market Microstructure Noise

DEFF Research Database (Denmark)

Hansen, Peter R.; Lunde, Asger

2006-01-01

We study market microstructure noise in high-frequency data and analyze its implications for the realized variance (RV) under a general specification for the noise. We show that kernel-based estimators can unearth important characteristics of market microstructure noise and that a simple kernel......-based estimator dominates the RV for the estimation of integrated variance (IV). An empirical analysis of the Dow Jones Industrial Average stocks reveals that market microstructure noise its time-dependent and correlated with increments in the efficient price. This has important implications for volatility...... estimation based on high-frequency data. Finally, we apply cointegration techniques to decompose transaction prices and bid-ask quotes into an estimate of the efficient price and noise. This framework enables us to study the dynamic effects on transaction prices and quotes caused by changes in the efficient...

New developments in irradiation-induced microstructural evolution of austenitic alloys and their consequences on mechanical properties

International Nuclear Information System (INIS)

Garner, F.A.; Brager, H.R.; Hamilton, M.L.; Dodd, R.A.; Porter, D.L.

1985-01-01

A survey is presented of recent development in the study of radiation-induced changes in the microstructure of austenitic structural alloys that occur in fission reactors. The associated macroscopic consequences of these changes on both mechanical properties and dimensional stability are also reviewed. It is anticipated that some changes will occur in these phenomena as a result of the differences inherent in fission and fusion neutron spectra, but relevant data obtained to date do not indicate that the effects of helium and several other transmutation-related changes will be large. 78 refs., 12 figs

Effect of microstructure on the impact toughness of high strength steels

Energy Technology Data Exchange (ETDEWEB)

Gutierrez, I.

2014-07-01

One of the major challenges in the development of new steel grades is to get increasingly high strength combined with a low ductile brittle transition temperature and a high upper shelf energy. This requires the appropriate microstructural design. Toughness in steels is controlled by different microstructural constituents. Some of them, like inclusions, are intrinsic while others happening at different microstructural scales relate to processing conditions. A series of empirical equations express the transition temperature as a sum of contributions from substitutional solutes, free nitrogen, carbides, pearlite, grain size and eventually precipitation strengthening. Aimed at developing a methodology that could be applied to high strength steels, microstructures with a selected degree of complexity were produced at laboratory in a Nb-microalloyed steel. As a result a model has been developed that consistently predicts the Charpy curves for ferrite-pearlite, bainitic and quenched and tempered microstructures using as input data microstructural parameters. This model becomes a good tool for microstructural design. (Author)

The CONNECT project: Combining macro- and micro-structure.

Science.gov (United States)

Assaf, Yaniv; Alexander, Daniel C; Jones, Derek K; Bizzi, Albero; Behrens, Tim E J; Clark, Chris A; Cohen, Yoram; Dyrby, Tim B; Huppi, Petra S; Knoesche, Thomas R; Lebihan, Denis; Parker, Geoff J M; Poupon, Cyril; Anaby, Debbie; Anwander, Alfred; Bar, Leah; Barazany, Daniel; Blumenfeld-Katzir, Tamar; De-Santis, Silvia; Duclap, Delphine; Figini, Matteo; Fischi, Elda; Guevara, Pamela; Hubbard, Penny; Hofstetter, Shir; Jbabdi, Saad; Kunz, Nicolas; Lazeyras, Francois; Lebois, Alice; Liptrot, Matthew G; Lundell, Henrik; Mangin, Jean-François; Dominguez, David Moreno; Morozov, Darya; Schreiber, Jan; Seunarine, Kiran; Nava, Simone; Poupon, Cyril; Riffert, Till; Sasson, Efrat; Schmitt, Benoit; Shemesh, Noam; Sotiropoulos, Stam N; Tavor, Ido; Zhang, Hui Gary; Zhou, Feng-Lei

2013-10-15

In recent years, diffusion MRI has become an extremely important tool for studying the morphology of living brain tissue, as it provides unique insights into both its macrostructure and microstructure. Recent applications of diffusion MRI aimed to characterize the structural connectome using tractography to infer connectivity between brain regions. In parallel to the development of tractography, additional diffusion MRI based frameworks (CHARMED, AxCaliber, ActiveAx) were developed enabling the extraction of a multitude of micro-structural parameters (axon diameter distribution, mean axonal diameter and axonal density). This unique insight into both tissue microstructure and connectivity has enormous potential value in understanding the structure and organization of the brain as well as providing unique insights to abnormalities that underpin disease states. The CONNECT (Consortium Of Neuroimagers for the Non-invasive Exploration of brain Connectivity and Tracts) project aimed to combine tractography and micro-structural measures of the living human brain in order to obtain a better estimate of the connectome, while also striving to extend validation of these measurements. This paper summarizes the project and describes the perspective of using micro-structural measures to study the connectome. Copyright © 2013 Elsevier Inc. All rights reserved.

Recrystallization - Fundamental aspects and relations to deformation microstructure

International Nuclear Information System (INIS)

Hansen, N.; Huang, X.; Juul Jensen, D.; Lauridsen, E.M.; Leffers, T.; Pantleon, W.; Sabin, T.J.; Wert, J.A.

2000-01-01

This Symposium, and hence this proceedings volume, is concerned with the mechanisms that control recrystallization of deformed metals and alloys. Central themes are the fundamental microstructural, orientational, and kinetic aspects of the recrystallization process; especially as they relate to the nature of the deformed state, to nucleation and growth of recrystallizing grains, and to models based on experimental observations. In recent years, significant progress has been made using a plethora of advanced techniques to characterize the morphology and local orientations in deformed metals and alloys. Thus, a key topic of the Symposium is enhanced insight into the characteristics of the deformation substructure, and into modification of the substructure by recovery, which is essential for understanding fundamental recrystallization mechanisms. Microstructures in highly strained materials will be a topic of special interest. Elucidation of the deformation substructure, and thus the local distribution of stored energy, sets the stage for progress in understanding nucleation of recrystallizing grains. It also provides a basis for new insights into the growth of nuclei, in particular concerning the means by which the deformation substructure is absorbed by and becomes incorporated into the recrystallization interface. Aspects of recrystallization of relevance to this symposium span the range from experimental and model exploration of fundamental mechanisms to methods that link scientific understanding to industrial practice. Models developed by considering the physical mechanisms elucidated by experimental studies will be addressed, as will models that enable industrial exploitation of the fundamental knowledge. Altogether, one of the significant aims of the symposium is to enhance the exploitation of the expanding knowledge of fundamental recrystallization mechanisms in industrial practice (au)

Experimental study on microstructure characters of foamed lightweight soil

Science.gov (United States)

Qiu, Youqiang; Li, Yongliang; Li, Meixia; Liu, Yaofu; Zhang, Liujun

2018-01-01

In order to verify the microstructure of foamed lightweight soil and its characters of compressive strength, four foamed lightweight soil samples with different water-soild ratio were selected and the microstructure characters of these samples were scanned by electron microscope. At the same time, the characters of compressive strength of foamed lightweight soil were analyzed from the microstructure. The study results show that the water-soild ratio has a prominent effect on the microstructure and compressive strength of foamed lightweight soil, with the decrease of water-solid ratio, the amount and the perforation of pores would be reduced significantly, thus eventually forming a denser and fuller interior structure. Besides, the denser microstructure and solider pore-pore wall is benefit to greatly increase mechanical intensity of foamed lightweight soil. In addition, there are very few acicular ettringite crystals in the interior of foamed lightweight soil, its number is also reduced with the decrease in water-soild ratio.

Extraction of Pluvial Flood Relevant Volunteered Geographic Information (VGI by Deep Learning from User Generated Texts and Photos

Directory of Open Access Journals (Sweden)

Yu Feng

2018-01-01

Full Text Available In recent years, pluvial floods caused by extreme rainfall events have occurred frequently. Especially in urban areas, they lead to serious damages and endanger the citizens’ safety. Therefore, real-time information about such events is desirable. With the increasing popularity of social media platforms, such as Twitter or Instagram, information provided by voluntary users becomes a valuable source for emergency response. Many applications have been built for disaster detection and flood mapping using crowdsourcing. Most of the applications so far have merely used keyword filtering or classical language processing methods to identify disaster relevant documents based on user generated texts. As the reliability of social media information is often under criticism, the precision of information retrieval plays a significant role for further analyses. Thus, in this paper, high quality eyewitnesses of rainfall and flooding events are retrieved from social media by applying deep learning approaches on user generated texts and photos. Subsequently, events are detected through spatiotemporal clustering and visualized together with these high quality eyewitnesses in a web map application. Analyses and case studies are conducted during flooding events in Paris, London and Berlin.

Microstructure history effect during sequential thermomechanical processing

International Nuclear Information System (INIS)

Yassar, Reza S.; Murphy, John; Burton, Christina; Horstemeyer, Mark F.; El kadiri, Haitham; Shokuhfar, Tolou

2008-01-01

The key to modeling the material processing behavior is the linking of the microstructure evolution to its processing history. This paper quantifies various microstructural features of an aluminum automotive alloy that undergoes sequential thermomechanical processing which is comprised hot rolling of a 150-mm billet to a 75-mm billet, rolling to 3 mm, annealing, and then cold rolling to a 0.8-mm thickness sheet. The microstructural content was characterized by means of electron backscatter diffraction, scanning electron microscopy, and transmission electron microscopy. The results clearly demonstrate the evolution of precipitate morphologies, dislocation structures, and grain orientation distributions. These data can be used to improve material models that claim to capture the history effects of the processing materials

Innovative microstructures in nuclear fuels

International Nuclear Information System (INIS)

Kutty, T.R.G.; Kumar, Arun; Kamath, H.S.

2009-01-01

For cleaner and safe nuclear power, new processes are required to design better nuclear fuels and make more efficient reactors to generate nuclear power. Therefore, one must understand how the microstructure changes during reactor operation. Accordingly, the materials scientists and engineers can then design and fabricate fuels with higher reliability and performance. Microstructure and its evolution are big unknowns in nuclear fuel. The basic requirements for the high performance of a fuel are: a) Soft pellets - To reduce Pellet clad mechanical interaction (PCMI) b) Large grain size - To reduce fission gas release (FGR). The strength of the pellet at room temperature is related to grain size by the Hall-Petch relation. Accordingly, the lower grain sized pellets will have high strength. But at high temperature (above equicohesive temperature) the grain boundaries becomes weaker than grain matrix. Since the small grain sized pellets have more grain boundary areas, these pellet become softer than pellet that have large grain sizes. Also as grain size decreases, creep rate of the fuel increases. Therefore, pellets with small grain size have higher creep rate and better plasticity. Therefore, these pellets will be useful to reduce the PCMI. On the other hand, pellet with large grain size is beneficial to reduce the fission gas release. In developing thermal reactor fuels for high burn-up, this factor should be taken into consideration. The question being asked is whether the microstructure can be tailored for irradiation hardening, fracture resistance, fission-gas release. This paper deals with the role played by microstructure for better irradiation performance. (author)

Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir-Welded Aluminum and Magnesium Dissimilar Alloys

Science.gov (United States)

Verma, Jagesvar; Taiwade, Ravindra V.; Sapate, Sanjay G.; Patil, Awanikumar P.; Dhoble, Ashwinkumar S.

2017-10-01

Microstructure, mechanical properties and corrosion resistance of dissimilar friction stir-welded aluminum and magnesium alloys were investigated by applying three different rotational speeds at two different travel speeds. Sound joints were obtained in all the conditions. The microstructure was examined by an optical and scanning electron microscope, whereas localized chemical information was studied by energy-dispersive spectroscopy. Stir zone microstructure showed mixed bands of Al and Mg with coarse and fine equiaxed grains. Grain size of stir zone reduced compared to base metals, indicated by dynamic recrystallization. More Al patches were observed in the stir zone as rotational speed increased. X-ray diffraction showed the presence of intermetallics in the stir zone. Higher tensile strength and hardness were obtained at a high rotational speed corresponding to low travel speed. Tensile fractured surface indicated brittle nature of joints. Dissimilar friction stir weld joints showed different behaviors in different corrosive environments, and better corrosion resistance was observed at a high rotational speed corresponding to low travel speed (FW3) in a sulfuric and chloride environments. Increasing travel speed did not significantly affect on microstructure, mechanical properties and corrosion resistance as much as the rotational speed.

Abnormal white matter microstructure among early adulthood smokers: a tract-based spatial statistics study.

Science.gov (United States)

Wang, Shuangkun; Zuo, Long; Jiang, Tao; Peng, Peng; Chu, Shuilian; Xiao, Dan

2017-12-01

Objectives Cigarette smoking is an important risk factor of central nervous system diseases. However, the white matter (WM) integrity of early adulthood chronic smokers has not been attached enough importance to as it deserves, and the relationship between the chronic smoking effect and the WM is still unclear. The purpose of this study was to investigate whole - brain WM microstructure of early adulthood smokers and explore the structural correlates of behaviorally relevant features of the disorder. Methods We compared multiple DTI-derived indices, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD) and radial diffusivity (RD), between early adulthood smokers (n = 19) and age-, education- and gender-matched controls (n = 23) using a whole-brain tract-based spatial statistics approach. We also explored the correlations of the mean DTI index values with pack-years and Fagerström Test for Nicotine Dependence. Results The smokers showed increased FA in left superior longitudinal fasciculus (SLF), left anterior corona radiate, left superior corona radiate, left posterior corona radiate, left external capsule (EC), left inferior fronto-occipital fasciculus and sagittal stratum (SS), and decreased RD in left SLF. There were significant negative correlations among the average FA in the left external capsule and pack-years in smokers. In addition, significant positive correlation was found between RD values in the left SLF and pack-years. Discussion These findings indicate that smokers show microstructural changes in several white-matter regions. The correlation between the cumulative effect and microstructural WM alternations suggests that WM properties may become the new biomarkers in practice.

SOFTWARE FOR IMAGE PROCESSING OF IRON-CARBONACEOUS ALLOY MICROSTRUCTURES

Directory of Open Access Journals (Sweden)

A. N. Chichko

2011-01-01

Full Text Available The paper proposes a mathematical apparatus for image processing of a cast-iron microstructure of a pearlite class that has casually distributed graphite inclusions in the structure the software has been developed and it allows to determine statistical functions concerning distribution of graphite inclusion characteristics according to areas, perimeters and distances between inclusions. The paper shows that computer processing of gray pig-iron microstructure image makes it possible to classify microstructures on the basis of statistical distribution of a graphite phase which are considered as indiscernible while applying conventional metallographic methods and it has practical significance for investigation of the interrelations – «workability – cast iron microstructure».

On the principles of microstructure scale development for titanium alloys

International Nuclear Information System (INIS)

Kolachev, B.A.; Mal'kov, A.V.; Gus'kova, L.N.

1982-01-01

Analysis of an existing standard scale of microstructures for two-phase (α+#betta#)-titanium alloy semiproducts is given. The basic principles of development of control microstructure scales for titanium alloys are presented on the base of investigations and generalization of literature data on connection of microstructure of titanium intermediate products from (α+#betta#)-alloys with their mechanical properties and service life characteristics. A possibilities of changing mechanical and operating properties at the expense of obtaining qualitatively and quantitatively regulated microstructure in the alloy are disclosed on the example of the (α+#betta#)-titanium alloy

A three-dimensional microstructuring technique exploiting the positive photoresist property

International Nuclear Information System (INIS)

Hirai, Yoshikazu; Sugano, Koji; Tsuchiya, Toshiyuki; Tabata, Osamu

2010-01-01

The present paper describes a three-dimensional (3D) thick-photoresist microstructuring technique that exploits the effect of exposure wavelength on dissolution rate distributions in a thick-film diazonaphthoquinone (DNQ) photoresist. In fabricating 3D microstructure with specific applications, it is important to control the spatial dissolution rate distribution in the photoresist layer, since the lithographic performance for 3D microstructuring is largely determined by the details of the dissolution property. To achieve this goal, the effect of exposure wavelength on dissolution rate distributions was applied for 3D microstructuring. The parametric experimental results demonstrated (1) the advantages of the fabrication technique for 3D microstructuring and (2) the necessity of a dedicated simulation approach based on the measured thick-photoresist property for further verification. Thus, a simple and practical photolithography simulation model that makes use of the Fresnel diffraction theory and an empirically characterized DNQ photoresist property was adopted. Simulations revealed good quantitative agreement between the photoresist development profiles of the standard photolithography and the moving-mask UV lithography process. The simulation and experimental results conclude that the g-line (λ = 436 nm) process can reduce the dimensional limitation or complexity of the photolithography process for the 3D microstructuring which leads to nanoscale microstructuring.

Assessing Hospital Physicians' Acceptance of Clinical Information Systems: A Review of the Relevant Literature

Directory of Open Access Journals (Sweden)

Bram Pynoo

2013-06-01

Full Text Available In view of the tremendous potential benefits of clinical information systems (CIS for the quality of patient care; it is hard to understand why not every CIS is embraced by its targeted users, the physicians. The aim of this study is to propose a framework for assessing hospital physicians' CIS-acceptance that can serve as a guidance for future research into this area. Hereto, a review of the relevant literature was performed in the ISI Web-of-Science database. Eleven studies were withheld from an initial dataset of 797 articles. Results show that just as in business settings, there are four core groups of variables that influence physicians' acceptance of a CIS: its usefulness and ease of use, social norms, and factors in the working environment that facilitate use of the CIS (such as providing computers/workstations, compatibility between the new and existing system.... We also identified some additional variables as predictors of CIS-acceptance.

On the relevance of the micromechanics approach for predicting the linear viscoelastic behavior of semi-crystalline poly(ethylene)terephtalates (PET)

International Nuclear Information System (INIS)

Diani, J.; Bedoui, F.; Regnier, G.

2008-01-01

The relevance of micromechanics modeling to the linear viscoelastic behavior of semi-crystalline polymers is studied. For this purpose, the linear viscoelastic behaviors of amorphous and semi-crystalline PETs are characterized. Then, two micromechanics modeling methods, which have been proven in a previous work to apply to the PET elastic behavior, are used to predict the viscoelastic behavior of three semi-crystalline PETs. The microstructures of the crystalline PETs are clearly defined using WAXS techniques. Since microstructures and mechanical properties of both constitutive phases (the crystalline and the amorphous) are defined, the simulations are run without adjustable parameters. Results show that the models are unable to reproduce the substantial decrease of viscosity induced by the increase of crystallinity. Unlike the real materials, for moderate crystallinity, both models show materials of viscosity nearly identical to the amorphous material

Microstructural Modeling of Brittle Materials for Enhanced Performance and Reliability.

Energy Technology Data Exchange (ETDEWEB)

Teague, Melissa Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Teague, Melissa Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodgers, Theron [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodgers, Theron [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Grutzik, Scott Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Grutzik, Scott Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Meserole, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Meserole, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-08-01

Brittle failure is often influenced by difficult to measure and variable microstructure-scale stresses. Recent advances in photoluminescence spectroscopy (PLS), including improved confocal laser measurement and rapid spectroscopic data collection have established the potential to map stresses with microscale spatial resolution (%3C2 microns). Advanced PLS was successfully used to investigate both residual and externally applied stresses in polycrystalline alumina at the microstructure scale. The measured average stresses matched those estimated from beam theory to within one standard deviation, validating the technique. Modeling the residual stresses within the microstructure produced general agreement in comparison with the experimentally measured results. Microstructure scale modeling is primed to take advantage of advanced PLS to enable its refinement and validation, eventually enabling microstructure modeling to become a predictive tool for brittle materials.

A model for simulation of coupled microstructural and compositional evolution

International Nuclear Information System (INIS)

Tikare, Veena; Homer, Eric R.; Holm, Elizabeth A.

2011-01-01

The formation, transport and segregation of components in nuclear fuels fundamentally control their behavior, performance, longevity and safety. Most nuclear fuels enter service with a uniform composition consisting of a single phase with two or three components. Fission products form, introducing more components. The segregation and transport of the components is complicated by the underlying microstructure consisting of grains, pores, bubbles and more, which is evolving under temperature gradients during service. As they evolve, components and microstructural features interact such that composition affects microstructure and vice versa. The ability to predict the interdependent compositional and microstructural evolution in 3D as a function of burn-up would greatly improve the ability to design safe, high burn-up nuclear fuels. We present a model that combines elements of Potts Monte Carlo, MC, and the phase-field model to treat coupled microstructural-compositional evolution. This hybrid model uses an equation of state, EOS, based on the microstructural state and the composition. The microstructural portion uses the traditional MC EOS and the compositional portion uses the phase-field EOS: E hyb = N Σ i=1 (E v (q i ,C)+1/2 n Σ j=1 J(q i ,q j )) + ∫κ c (∇C) 2 dV. E v is the bulk free energy of each site i and J is the bond energy between neighboring sites i and j; thus, this term defines the microstructural interfacial energy. The last term is the compositional interfacial energy as defined in the traditional phase-field model. Evolution of coupled microstructure-composition is simulated by minimizing free energy in a path dependent manner. This model will be presented and will be demonstrated by applying it to evolution of nuclear fuels during service. (author)

Feasibility of a data-constrained prediction of hydrocarbon reservoir sandstone microstructures

International Nuclear Information System (INIS)

Yang, Y S; Gureyev, T E; Tulloh, A; Clennell, M B; Pervukhina, M

2010-01-01

Microstructures are critical for defining material characteristics such as permeability, mechanical, electrical and other physical properties. However, the available techniques for determining compositional microstructures through segmentation of x-ray computed tomography (CT) images are inadequate when there are finer structures than the CT spatial resolution, i.e. when there is more than one material in each voxel. This is the case for CT imaging of geomaterials characterized with submicron porosity and clay coating that control petrophysical properties of rock. This note outlines our data-constrained modelling (DCM) approach for prediction of compositional microstructures, and our investigation of the feasibility of determining sandstone microstructures using multiple CT data sets with different x-ray beam energies. In the DCM approach, each voxel is assumed to contain a mixture of multiple materials, optionally including voids. Our preliminary comparisons using model samples indicate that the DCM-predicted compositional microstructure is consistent with the known original microstructure under low noise conditions. The approach is quite generic and is applicable to predictions of microstructure of various materials. (technical design note)

The Characteristics of Informed Trading

DEFF Research Database (Denmark)

Aslan, Hadiye; Easley, David; Hvidkjær, Søren

2011-01-01

This paper investigates the linkage of microstructure, accounting, and asset pricing. We determine the relationship between firm characteristics as captured by accounting and market data and a firm's probability of private information-based trade (PIN) as estimated from trade data. This allows us...

Surveying managers to inform a regionally relevant invasive Phragmites australis control research program.

Science.gov (United States)

Rohal, C B; Kettenring, K M; Sims, K; Hazelton, E L G; Ma, Z

2018-01-15

more pertinent to manager needs and trusted by managers. Such an approach that integrates manager surveys to inform management experiments could be adapted to any developing research program seeking to be relevant to management audiences. Copyright © 2017 Elsevier Ltd. All rights reserved.

Continuous media with microstructure

CERN Document Server

2010-01-01

This book discusses the extension of classical continuum models. To the first class addressed belong various thermodynamic models of multicomponent systems, and to the second class belong primarily microstructures created by phase transformations.

High-flux He+ irradiation effects on surface damages of tungsten under ITER relevant conditions

International Nuclear Information System (INIS)

Liu, Lu; Liu, Dongping; Hong, Yi; Fan, Hongyu; Ni, Weiyuan; Yang, Qi; Bi, Zhenhua; Benstetter, Günther; Li, Shouzhe

2016-01-01

A large-power inductively coupled plasma source was designed to perform the continuous helium ions (He + ) irradiations of polycrystalline tungsten (W) under International Thermonuclear Experimental Reactor (ITER) relevant conditions. He + irradiations were performed at He + fluxes of 2.3 × 10 21 –1.6 × 10 22 /m 2  s and He + energies of 12–220 eV. Surface damages and microstructures of irradiated W were observed by scanning electron microscopy. This study showed the growth of nano-fuzzes with their lengths of 1.3–2.0 μm at He + energies of >70 eV or He + fluxes of >1.3 × 10 22 /m 2  s. Nanometer-sized defects or columnar microstructures were formed in W surface layer due to low-energy He + irradiations at an elevated temperature (>1300 K). The diffusion and coalescence of He atoms in W surface layers led to the growth and structures of nano-fuzzes. This study indicated that a reduction of He + energy below 12–30 eV may greatly decrease the surface damage of tungsten diverter in the fusion reactor.

Microstructural characterization of materials by neural network technique

Energy Technology Data Exchange (ETDEWEB)

Barat, P. [Variable Energy Cyclotron Centre, 1/AF Bidhan Nagar, Kolkata 700064 (India); Chatterjee, A., E-mail: arnomitra@veccal.ernet.i [Variable Energy Cyclotron Centre, 1/AF Bidhan Nagar, Kolkata 700064 (India); Mukherjee, P.; Gayathri, N. [Variable Energy Cyclotron Centre, 1/AF Bidhan Nagar, Kolkata 700064 (India); Jayakumar, T.; Raj, Baldev [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)

2010-11-15

Ultrasonic signals received by pulse echo technique from plane parallel Zircaloy 2 samples of fixed thickness and of three different microstructures, were subjected to signal analysis, as conventional parameters like velocity and attenuation could not reliably discriminate them. The signals, obtained from these samples, were first sampled and digitized. Modified Karhunen Loeve Transform was used to reduce their dimensionality. A multilayered feed forward Artificial Neural Network was trained using a few signals in their reduced domain from the three different microstructures. The rest of the signals from the three samples with different microstructures were classified satisfactorily using this network.

Pilot information needs survey regarding climate relevant technologies

International Nuclear Information System (INIS)

Van Berkel, R.; Van Roekel, A.

1997-02-01

The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs

Pilot information needs survey regarding climate relevant technologies

Energy Technology Data Exchange (ETDEWEB)

Van Berkel, R.; Van Roekel, A.

1997-02-01

The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs.

A review of numerical techniques approaching microstructures of crystalline rocks

Science.gov (United States)

Zhang, Yahui; Wong, Louis Ngai Yuen

2018-06-01

The macro-mechanical behavior of crystalline rocks including strength, deformability and failure pattern are dominantly influenced by their grain-scale structures. Numerical technique is commonly used to assist understanding the complicated mechanisms from a microscopic perspective. Each numerical method has its respective strengths and limitations. This review paper elucidates how numerical techniques take geometrical aspects of the grain into consideration. Four categories of numerical methods are examined: particle-based methods, block-based methods, grain-based methods, and node-based methods. Focusing on the grain-scale characters, specific relevant issues including increasing complexity of micro-structure, deformation and breakage of model elements, fracturing and fragmentation process are described in more detail. Therefore, the intrinsic capabilities and limitations of different numerical approaches in terms of accounting for the micro-mechanics of crystalline rocks and their phenomenal mechanical behavior are explicitly presented.

Microstructural analysis of the 2195 aluminum-lithium alloy welds

Science.gov (United States)

Talia, George E.

1993-01-01

The principal objective of this research was to explain a tendency of 2195 Al-Li alloy to crack at elevated temperature during welding. Therefore, a study was made on the effect of welding and thermal treatment on the microstructure of Al-Li Alloy 2195. The critical roles of precipitates, boundaries, phases, and other features of the microstructure were inferred from the crack propagation paths and the morphology of fracture surface of the alloy with different microstructures. Particular emphasis was placed on the microstructures generated by the welding process and the mechanisms of crack propagation in such structures. Variation of the welding parameters and thermal treatments were used to alter the micro/macro structures, and they were characterized by optical and scanning electron microscopy. A theoretical model is proposed to explain changes in the microstructure of welded material. This model proposes a chemical reaction in which gases from the air (i.e., nitrogen) release hydrogen inside the alloy. Such a reaction could generate large internal stresses capable to induce porosity and crack-like delamination in the material.

The value relevance of environmental emissions

Directory of Open Access Journals (Sweden)

Melinda Lydia Nelwan

2016-07-01

Full Text Available This study examines whether environmental performance has value relevance by investigating the relations between environmental emissions and stock prices for the U.S. public companies. The previous studies argued that the conjectured relations between accounting performance measures and environmental performance do not have a strong theoretical basis, and the modeling of relations between market per-formance measures and environmental performance do not adequately consider the relevance of accounting performance to market value. Therefore, this study examines whether publicly reported environmental emissions provide incremental information to accounting earnings in pricing companies stocks. It is done among the complete set of industries covered by Toxics Release Inventory (TRI reporting for the period 2007 to 2010. Using Ohlson model but modified to include different types of emis-sions, it is found that ground emissions (underground injection and land emissions are value relevant but other emission types (air and water and transferred-out emis-sions appear to not provide incremental information in the valuation model. The result in this study raise concerns that different types of emissions are assessed differently by the market, confirming that studies should not aggregate such measures.

Microstructures prepared via inkjet printing and embossing techniques

NARCIS (Netherlands)

Perelaer, J.

2009-01-01

The goal of the work presented in this thesis is the combined use of inkjet printing and embossing techniques to fabricate microstructures. The thesis is divided into two sections. The first part (Chapters 1 to 4) describes a bottom-up procedure using inkjet printing to fabricate microstructures

Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

Science.gov (United States)

Tremsin, Anton S.; Gao, Yan; Dial, Laura C.; Grazzi, Francesco; Shinohara, Takenao

2016-01-01

Non-destructive testing techniques based on neutron imaging and diffraction can provide information on the internal structure of relatively thick metal samples (up to several cm), which are opaque to other conventional non-destructive methods. Spatially resolved neutron transmission spectroscopy is an extension of traditional neutron radiography, where multiple images are acquired simultaneously, each corresponding to a narrow range of energy. The analysis of transmission spectra enables studies of bulk microstructures at the spatial resolution comparable to the detector pixel. In this study we demonstrate the possibility of imaging (with 100 μm resolution) distribution of some microstructure properties, such as residual strain, texture, voids and impurities in Inconel 625 samples manufactured with an additive manufacturing method called direct metal laser melting (DMLM). Although this imaging technique can be implemented only in a few large-scale facilities, it can be a valuable tool for optimization of additive manufacturing techniques and materials and for correlating bulk microstructure properties to manufacturing process parameters. In addition, the experimental strain distribution can help validate finite element models which many industries use to predict the residual stress distributions in additive manufactured components.

Overview of microstructural evolution in neutron-irradiated austenitic stainless steels

International Nuclear Information System (INIS)

Maziasz, P.J.

1993-01-01

Austenitic stainless steels are important structural materials common to several different reactor systems, including light water and fast breeder fission, and magnetic fusion reactors (LWR, FBR, and MFR, respectively). The microstructures that develop in 300 series austenitic stainless steels during neutron irradiation at 60-700 C include combinations of dislocation loops and networks, bubbles and voids, and various kinds of precipitate phases (radiation-induced, or -enhanced or -modified thermal phases). Many property changes in these steels during neutron irradiation are directly or indirectly related to radiation-induced microstructural evolution. Even more important is the fact that radiation-resistance of such steels during either FBR or MFR irradiation is directly related to control of the evolving microstructure during such irradiation. The purpose of this paper is to provide an overview of the large and complex body of data accumulated from various fission reactor irradiation experiments conducted over the many years of research on microstructural evolution in this family of steels. The data can be organized into several different temperature regimes which then define the nature of the dominant microstructural components and their sensitivities to irradiation parameters (dose, helium/dpa ratio, dose rate) or metallurgical variables (alloy composition, pretreatment). The emphasis in this paper will be on the underlying mechanisms driving the microstructure to evolve during irradiation or those enabling microstructural stability related to radiation resistance. (orig.)

Microstructure evaluation and mechanical behavior of high-niobium containing titanium aluminides

Science.gov (United States)

Bean, Glenn Estep, Jr.

Ti-Al-Nb-based alloys with gamma(TiAl)+sigma(Nb2Al) microstructure have shown promise for potential high temperature applications due to their high specific strength. Recent research has been aimed towards increasing strength and operating temperatures through microstructural refinement and control. Alloys with 10 - 30% sigma-phase have been investigated, exploring relationships between chemistry, microstructure development, and flow behavior. Alloys with composition Ti-45Al-xNb-5Cr-1Mo (where x = 15, 20, 25 at%) have been produced, characterized, and tested at high temperature under compression. Processing, microstructure and mechanical property relationships are thoroughly investigated to reveal a significant connection between phase stability, morphology and their resultant effects on mechanical properties. Phase transformation temperatures and stability ranges were predicted using the ThermoCalc software program and a titanium aluminide database, investigated through thermal analysis, and alloys were heat treated to develop an ultrafine gamma+sigma microstructure. It has been demonstrated that microstructural development in these alloys is sensitive to composition and processing parameters, and heating and cooling rates are vital to the modification of gamma+sigma microstructure in these alloys. Towards the goal of designing a high-Nb titanium aluminide with ultrafine, disconnected gamma+sigma morphology, it has been established that microstructural control can be accomplished in alloys containing 15-25at% Nb through targeted chemistry and processing controls. The strength and flow softening characteristics show strain rate sensitivity that is also affected by temperature. From the standpoint of microstructure development and mechanical behavior at elevated temperature, the most favorable results are obtained with the 20 at% Nb alloy, which produces a combination of high strength and fine disconnected gamma+sigma microstructure. Microstructural analysis reveals

Microchemical and microstructural evolution of AISI 304 stainless steel irradiated in EBR-II at PWR-relevant dpa rates

Energy Technology Data Exchange (ETDEWEB)

Dong, Y. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Sencer, B.H. [Idaho National Laboratory, Idaho Falls, ID 83402 (United States); Garner, F.A. [Radiation Effects Consulting, Richland, WA 99354 (United States); Marquis, E.A., E-mail: emarq@umich.edu [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States)

2015-12-15

AISI 304 stainless steel was irradiated at 416 °C and 450 °C at a 4.4 × 10{sup −9} and 3.05 × 10{sup −7} dpa/s to ∼0.4 and ∼28 dpa, respectively, in the reflector of the EBR-II fast reactor. Both unirradiated and irradiated conditions were examined using standard and scanning transmission electron microscopy, energy dispersive spectroscopy, and atom probe tomography on very small specimens produced by focused ion beam milling. These results are compared with previous electron microscopy examination of 3 mm disks from essentially the same material. By comparing a very low dose specimen with a much higher dose specimen, both derived from a single reactor assembly, it has been demonstrated that the coupled microstructural and microchemical evolution of dislocation loops and other sinks begins very early, with elemental segregation producing at these sinks what appears to be measurable precursors to fully formed precipitates found at higher doses. The nature of these sinks and their possible precursors are examined in detail.

Microchemical and microstructural evolution of AISI 304 stainless steel irradiated in EBR-II at PWR-relevant dpa rates

Science.gov (United States)

Dong, Y.; Sencer, B. H.; Garner, F. A.; Marquis, E. A.

2015-12-01

AISI 304 stainless steel was irradiated at 416 °C and 450 °C at a 4.4 × 10-9 and 3.05 × 10-7 dpa/s to ∼0.4 and ∼28 dpa, respectively, in the reflector of the EBR-II fast reactor. Both unirradiated and irradiated conditions were examined using standard and scanning transmission electron microscopy, energy dispersive spectroscopy, and atom probe tomography on very small specimens produced by focused ion beam milling. These results are compared with previous electron microscopy examination of 3 mm disks from essentially the same material. By comparing a very low dose specimen with a much higher dose specimen, both derived from a single reactor assembly, it has been demonstrated that the coupled microstructural and microchemical evolution of dislocation loops and other sinks begins very early, with elemental segregation producing at these sinks what appears to be measurable precursors to fully formed precipitates found at higher doses. The nature of these sinks and their possible precursors are examined in detail.

Modeling Percolation in Polymer Nanocomposites by Stochastic Microstructuring

Directory of Open Access Journals (Sweden)

Matias Soto

2015-09-01

Full Text Available A methodology was developed for the prediction of the electrical properties of carbon nanotube-polymer nanocomposites via Monte Carlo computational simulations. A two-dimensional microstructure that takes into account waviness, fiber length and diameter distributions is used as a representative volume element. Fiber interactions in the microstructure are identified and then modeled as an equivalent electrical circuit, assuming one-third metallic and two-thirds semiconductor nanotubes. Tunneling paths in the microstructure are also modeled as electrical resistors, and crossing fibers are accounted for by assuming a contact resistance associated with them. The equivalent resistor network is then converted into a set of linear equations using nodal voltage analysis, which is then solved by means of the Gauss–Jordan elimination method. Nodal voltages are obtained for the microstructure, from which the percolation probability, equivalent resistance and conductivity are calculated. Percolation probability curves and electrical conductivity values are compared to those found in the literature.

Voronoi diagram and microstructure of weldment

Energy Technology Data Exchange (ETDEWEB)

Cho, Jung Ho [Chungbuk National University, Cheongju (Korea, Republic of)

2015-01-15

Voronoi diagram, one of the well-known space decomposition algorithms has been applied to express the microstructure of a weldment for the first time due to the superficial analogy between a Voronoi cell and a metal's grain. The area of the Voronoi cells can be controlled by location and the number of the seed points. This can be correlated to the grain size in the microstructure and the number of nuclei formed. The feasibility of representing coarse and fine grain structures were tested through Voronoi diagrams and it is applied to expression of cross-sectional bead shape of a typical laser welding. As result, it successfully described coarsened grain size of heat affected zone and columnar crystals in fusion zone. Although Voronoi diagram showed potential as a microstructure prediction tool through this feasible trial but direct correlation control variable of Voronoi diagram to solidification process parameter is still remained as further works.

Book value, earnings, dividends, and audit quality on the value relevance of accounting information among Nigerian listed firms

Directory of Open Access Journals (Sweden)

Muhammad Yusuf Alkali

2018-04-01

Full Text Available The objective of this paper is to determine the effect of International Financial Reporting Standards (IFRS as a new accounting reporting among Nigerian listed firms. This study uses book value, earnings and dividends to fill in the gap using a sample of 126 Nigerian listed firms in the stock market from 2009 to 2013 (pre and Post-IFRS adoption. Data was collected from Thompson Reuters, Bank scope DataStreams and annual reports. The study adopted Ohlson (1995 [Ohlson, J. (1995. Earnings, book-value, and dividends in equity valuation. Contemporary Accounting Research, 11(2, 661–687.] price model that has been frequently used in determining the quality of accounting information studies. The study finds that combined book value, earnings and dividends do not provide statistical significance effects on IFRS after adoption on the quality of accounting information. This could be possible, as dividends do not provide a significant effect in the presence of earnings. Furthermore, the audit big 4 quality provided an effect on the quality of accounting information because of IFRS adoption. Therefore, findings of this study provide additional literature on the decreasing quality of accounting information in an emerging market setting like Nigeria. The study implication is to the policy makers, regulators, and government that accounting information do not provide value relevance among Nigerian listed firms after IFRS adoption.

Microstructural influence on the local behaviour of 16MND5 steel

International Nuclear Information System (INIS)

Sekfali, S.

2004-06-01

16MND5 Steel or A508 Cl3 is used for manufacture by forging of nuclear reactor vessels. This material presents a good compromise in term of tenacity and yield stress, its microstructure is mainly bainitic tempered. Because of the chemical composition local variation and process of development, this material presents microstructural heterogeneities which can locally modify the properties of damage. In particular, some zones present a martensitic microstructure. The goal of this thesis is to bring some explanations on the influence of the microstructure; more particularly, size of the crystallographic entities and their spatial distribution on the local behaviour of 16MND5 steel. Two microstructures were elaborated for this purpose, a tempered bainitic microstructure and a tempered martensitic microstructure. An experimental characterization was carried out on the two microstructures in order to determine morphology, spatial distribution of the crystallographic orientations and tensile behaviour. A deposit of micro grid was carried out on tensile specimens to determine the experimental deformation field on a beforehand EBSD analyzed zone. The determination of the tensile behaviour allowed the identification of a multi crystalline behaviour law by a reverse method using the density of dislocation on each system of slip. This behaviour law was used in simulations with a finite element method to simulate the local mechanical field of the two microstructures and to compare with the obtained experimental deformation fields. It results, a good adequacy between simulations and experiments and the description of the influence of the neighbor grain's orientation on the local behaviour. (author)

Effet des additions sur la microstructure et le comportement ...

African Journals Online (AJOL)

the microstructure, thermal fatigue and tribological tests of the NiAl coating, obtained by atmospheric plasma ...... Mechanisms of oxidation and its role in microstructural evolution of ... protective coatings, Surface and Coatings Technology, Vol.

Effects of polytetrafluoroethylene treatment and compression on gas diffusion layer microstructure using high-resolution X-ray computed tomography

Science.gov (United States)

Khajeh-Hosseini-Dalasm, Navvab; Sasabe, Takashi; Tokumasu, Takashi; Pasaogullari, Ugur

2014-11-01

The microstructure of a TGP-H-120 Toray paper gas diffusion layer (GDL) was investigated using high resolution X-ray computed tomography (CT) technique, with a resolution of 1.8 μm and a field of view (FOV) of ∼1.8 × 1.8 mm. The images obtained from the tomography scans were further post processed, and image thresholding and binarization methodologies are presented. The validity of Otsu's thresholding method was examined. Detailed information on bulk porosity and porosity distribution of the GDL at various Polytetrafluoroethylene (PTFE) treatments and uniform/non-uniform compression pressures was provided. A sample holder was designed to investigate the effects of non-uniform compression pressure, which enabled regulating compression pressure between 0, and 3 MPa at a gas channel/current collector rib configuration. The results show the heterogeneous and anisotropic microstructure of the GDL, non-uniform distribution of PTFE, and significant microstructural change under uniform/non-uniform compression. These findings provide useful inputs for numerical models to include the effects of microstructural changes in the study of transport phenomena within the GDL and to increase the accuracy and predictability of cell performance.

Microstructured optical fibers - Fundamentals and applications

DEFF Research Database (Denmark)

Lægsgaard, Jesper; Bjarklev, Anders Overgaard

2006-01-01

In recent years optical fibers having a complex microstructure in the transverse plane have attracted much attention from both researchers and industry. Such fibers can either guide light through total internal reflection or the photonic bandgap effect. Among the many unique applications offered...... by these fibers are mode guidance in air, highly flexible dispersion engineering, and the use of very heterogeneous material combinations. In this paper, we review the different types and applications of microstructured optical fibers, with particular emphasis on recent advances in the field....

Laser-induced microstructural development and phase evolution in magnesium alloy