Satisfying the Einstein-Podolsky-Rosen criterion with massive particles.

Science.gov (United States)

Peise, J; Kruse, I; Lange, K; Lücke, B; Pezzè, L; Arlt, J; Ertmer, W; Hammerer, K; Santos, L; Smerzi, A; Klempt, C

2015-11-27

In 1935, Einstein, Podolsky and Rosen (EPR) questioned the completeness of quantum mechanics by devising a quantum state of two massive particles with maximally correlated space and momentum coordinates. The EPR criterion qualifies such continuous-variable entangled states, where a measurement of one subsystem seemingly allows for a prediction of the second subsystem beyond the Heisenberg uncertainty relation. Up to now, continuous-variable EPR correlations have only been created with photons, while the demonstration of such strongly correlated states with massive particles is still outstanding. Here we report on the creation of an EPR-correlated two-mode squeezed state in an ultracold atomic ensemble. The state shows an EPR entanglement parameter of 0.18(3), which is 2.4 s.d. below the threshold 1/4 of the EPR criterion. We also present a full tomographic reconstruction of the underlying many-particle quantum state. The state presents a resource for tests of quantum nonlocality and a wide variety of applications in the field of continuous-variable quantum information and metrology.

Satisfying the Einstein-Podolsky-Rosen criterion with massive particles

DEFF Research Database (Denmark)

Peise, Jan; Kruse, I.; Lange, K.

2016-01-01

In 1935, Einstein, Podolsky and Rosen (EPR) questioned the completeness of quantum mechanics by devising a quantum state of two massive particles with maximally correlated space and momentum coordinates. The EPR criterion qualifies such continuous-variable entangled states, as shown successfully...

On the Jeans criterion

International Nuclear Information System (INIS)

Whitworth, A.P.

1980-01-01

The Jeans criterion is first stated and distinguished from the Virial Theorem. Then it is discussed how the Jeans criterion can be derived from the Virial Theorem and the inherent shortcomings in this derivation. Finally, it is indicated how these shortcomings might be overcome. The Jeans criterion is a fragmentation - or condensation -criterion. An expression is given, connecting the fragmentation of an unstable extended medium into masses Msub(J). Rather than picturing the background medium fragmenting, it is probably more appropriate to envisage these masses Msub(J) 'condensing' out of the background medium. On the condensation picture some fraction of the background material separates out into coherent bound nodules under the pull of its self-gravity. For this reason the Jeans criterion is discussed as a condensation condition, reserving the term fragmentation for a different process. The Virial Theorem provides a contraction criterion. This is described with reference to a spherical cloud and is developed to derive the Jeans criterion. (U.K.)

Fulfillment of the kinetic Bohm criterion in a quasineutral particle-in-cell model

International Nuclear Information System (INIS)

Ahedo, Eduardo; Santos, Robert; Parra, Felix I.

2010-01-01

Quasineutral particle-in-cell models of ions must fulfill the kinetic Bohm criterion, in its inequality form, at the domain boundary in order to match correctly with solutions of the Debye sheaths tied to the walls. The simple, fluid form of the Bohm criterion is shown to be a bad approximation of the exact, kinetic form when the ion velocity distribution function has a significant dispersion and involves different charge numbers. The fulfillment of the Bohm criterion is measured by a weighting algorithm at the boundary, but linear weighting algorithms have difficulties to reproduce the nonlinear behavior around the sheath edge. A surface weighting algorithm with an extended temporal weighting is proposed and shown to behave better than the standard volumetric weighting. Still, this must be supplemented by a forcing algorithm of the kinetic Bohm criterion. This postulates a small potential fall in a supplementary, thin, transition layer. The electron-wall interaction is shown to be of little relevance in the fulfillment of the Bohm criterion.

Stimulus variability and the phonetic relevance hypothesis: effects of variability in speaking style, fundamental frequency, and speaking rate on spoken word identification.

Science.gov (United States)

Sommers, Mitchell S; Barcroft, Joe

2006-04-01

Three experiments were conducted to examine the effects of trial-to-trial variations in speaking style, fundamental frequency, and speaking rate on identification of spoken words. In addition, the experiments investigated whether any effects of stimulus variability would be modulated by phonetic confusability (i.e., lexical difficulty). In Experiment 1, trial-to-trial variations in speaking style reduced the overall identification performance compared with conditions containing no speaking-style variability. In addition, the effects of variability were greater for phonetically confusable words than for phonetically distinct words. In Experiment 2, variations in fundamental frequency were found to have no significant effects on spoken word identification and did not interact with lexical difficulty. In Experiment 3, two different methods for varying speaking rate were found to have equivalent negative effects on spoken word recognition and similar interactions with lexical difficulty. Overall, the findings are consistent with a phonetic-relevance hypothesis, in which accommodating sources of acoustic-phonetic variability that affect phonetically relevant properties of speech signals can impair spoken word identification. In contrast, variability in parameters of the speech signal that do not affect phonetically relevant properties are not expected to affect overall identification performance. Implications of these findings for the nature and development of lexical representations are discussed.

E-tourism, as display of dominant criterion of modern tourism-operating: relevant provisions, tools, use

Directory of Open Access Journals (Sweden)

Tatyana Tkachenko

2017-11-01

Full Text Available Modern world tourism has become an information-dependent industry. At the moment, there is a rapid trend in the transformation of the society into developed information society. Therefore, the logical goal of the work is to research innovative trends in the development of intelligent web services to create and formulate recommendations for the further development of the tourism industry. The methodological part of the article is based on the use of modern information technologies in the field of tourism, focused on the basis of eРlatforms of the tourism industry. As a result, in many tourist enterprises of the 21st century, significant adaptations must be made to remain solvent and profitable. The effectiveness of the research can be traced to the bright trend of transformation in the world, and in particular in Ukraine, the traditional tourism industry, the e-tourism industry. Scientific novelty consists of conceptual improvement of the manifestation of the dominant criterion of modern tourism operating and its derivatives: e-tourism can be defined as the analysis, development, formation, implementation and application of IT solutions and e-commerce in the world and national tourism industry. Practical significance of the research results is relevant: the need for perfect managers able to manage the tourism business, integrate information and communication technologies (ICT within the company, to anticipate and promote ICT developments to better meet the needs of the tourism business. The article is written in the form of an analytical review of innovative IT in the field of tourism. The authors present a number of important characteristics of research.

Ethical leadership: meta-analytic evidence of criterion-related and incremental validity.

Science.gov (United States)

Ng, Thomas W H; Feldman, Daniel C

2015-05-01

This study examines the criterion-related and incremental validity of ethical leadership (EL) with meta-analytic data. Across 101 samples published over the last 15 years (N = 29,620), we observed that EL demonstrated acceptable criterion-related validity with variables that tap followers' job attitudes, job performance, and evaluations of their leaders. Further, followers' trust in the leader mediated the relationships of EL with job attitudes and performance. In terms of incremental validity, we found that EL significantly, albeit weakly in some cases, predicted task performance, citizenship behavior, and counterproductive work behavior-even after controlling for the effects of such variables as transformational leadership, use of contingent rewards, management by exception, interactional fairness, and destructive leadership. The article concludes with a discussion of ways to strengthen the incremental validity of EL. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Simpler criterion on W state for perfect quantumstate splitting and quantum teleportation

Institute of Scientific and Technical Information of China (English)

无

2009-01-01

A simpler criterion is presented to judge whether a W state can be taken as quantum channel forperfectly splitting or teleporting an arbitrary single-qubit state. If the W state is usable,the detailed manipulations in the two quantum information processes are amply shown. Moreover,some relevant discussions are made.

Criterion learning in rule-based categorization: simulation of neural mechanism and new data.

Science.gov (United States)

Helie, Sebastien; Ell, Shawn W; Filoteo, J Vincent; Maddox, W Todd

2015-04-01

In perceptual categorization, rule selection consists of selecting one or several stimulus-dimensions to be used to categorize the stimuli (e.g., categorize lines according to their length). Once a rule has been selected, criterion learning consists of defining how stimuli will be grouped using the selected dimension(s) (e.g., if the selected rule is line length, define 'long' and 'short'). Very little is known about the neuroscience of criterion learning, and most existing computational models do not provide a biological mechanism for this process. In this article, we introduce a new model of rule learning called Heterosynaptic Inhibitory Criterion Learning (HICL). HICL includes a biologically-based explanation of criterion learning, and we use new category-learning data to test key aspects of the model. In HICL, rule selective cells in prefrontal cortex modulate stimulus-response associations using pre-synaptic inhibition. Criterion learning is implemented by a new type of heterosynaptic error-driven Hebbian learning at inhibitory synapses that uses feedback to drive cell activation above/below thresholds representing ionic gating mechanisms. The model is used to account for new human categorization data from two experiments showing that: (1) changing rule criterion on a given dimension is easier if irrelevant dimensions are also changing (Experiment 1), and (2) showing that changing the relevant rule dimension and learning a new criterion is more difficult, but also facilitated by a change in the irrelevant dimension (Experiment 2). We conclude with a discussion of some of HICL's implications for future research on rule learning. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparing hierarchical models via the marginalized deviance information criterion.

Science.gov (United States)

Quintero, Adrian; Lesaffre, Emmanuel

2018-07-20

Hierarchical models are extensively used in pharmacokinetics and longitudinal studies. When the estimation is performed from a Bayesian approach, model comparison is often based on the deviance information criterion (DIC). In hierarchical models with latent variables, there are several versions of this statistic: the conditional DIC (cDIC) that incorporates the latent variables in the focus of the analysis and the marginalized DIC (mDIC) that integrates them out. Regardless of the asymptotic and coherency difficulties of cDIC, this alternative is usually used in Markov chain Monte Carlo (MCMC) methods for hierarchical models because of practical convenience. The mDIC criterion is more appropriate in most cases but requires integration of the likelihood, which is computationally demanding and not implemented in Bayesian software. Therefore, we consider a method to compute mDIC by generating replicate samples of the latent variables that need to be integrated out. This alternative can be easily conducted from the MCMC output of Bayesian packages and is widely applicable to hierarchical models in general. Additionally, we propose some approximations in order to reduce the computational complexity for large-sample situations. The method is illustrated with simulated data sets and 2 medical studies, evidencing that cDIC may be misleading whilst mDIC appears pertinent. Copyright © 2018 John Wiley & Sons, Ltd.

Time to Criterion: An Experimental Study.

Science.gov (United States)

Anderson, Lorin W.

The purpose of the study was to investigate the magnitude of individual differences in time-to-criterion and the stability of these differences. Time-to-criterion was defined in two ways: the amount of elapsed time required to attain the criterion level and the amount of on-task time required to attain the criterion level. Ninety students were…

Ginsburg criterion for an equilibrium superradiant model in the dynamic approach

International Nuclear Information System (INIS)

Trache, M.

1991-10-01

Some critical properties of an equilibrium superradiant model are discussed, taking into account the quantum fluctuations of the field variables. The critical region is calculated using the Ginsburg criterion, underlining the role of the atomic concentration as a control parameter of the phase transition. (author). 16 refs, 1 fig

Calculation of the residual bearing capacity of reinforced concrete beams by the rigidity (deflection) criterion

OpenAIRE

V.S. Utkin; S.A. Solovyov

2015-01-01

The article proposes the method of calculating the bearing capacity of reinforced concrete beams at the operational stage by the rigidity (deflection) criterion. The methods, which were used in the article, are integral test and probabilistic methods for describing random variables. The author offers a new technique of calculating a deflection limit by a criterion of residual deformations. The article exemplifies the usage of the evidence theory for statistical information processing in the f...

Advancing the Relevance Criteria for Video Search and Visual Summarization

NARCIS (Netherlands)

Rudinac, S.

2013-01-01

To facilitate finding of relevant information in ever-growing multimedia collections, a number of multimedia information retrieval solutions have been proposed over the past years. The essential element of any such solution is the relevance criterion deployed to select or rank the items from a

Fuel-pin cladding transient failure strain criterion

International Nuclear Information System (INIS)

Bard, F.E.; Duncan, D.R.; Hunter, C.W.

1983-01-01

A criterion for cladding failure based on accumulated strain was developed for mixed uranium-plutonium oxide fuel pins and used to interpret the calculated strain results from failed transient fuel pin experiments conducted in the Transient Reactor Test (TREAT) facility. The new STRAIN criterion replaced a stress-based criterion that depends on the DORN parameter and that incorrectly predicted fuel pin failure for transient tested fuel pins. This paper describes the STRAIN criterion and compares its prediction with those of the stress-based criterion

A protocol for classifying ecologically relevant marine zones, a statistical approach

Science.gov (United States)

Verfaillie, Els; Degraer, Steven; Schelfaut, Kristien; Willems, Wouter; Van Lancker, Vera

2009-06-01

Mapping ecologically relevant zones in the marine environment has become increasingly important. Biological data are however often scarce and alternatives are being sought in optimal classifications of abiotic variables. The concept of 'marine landscapes' is based on a hierarchical classification of geological, hydrographic and other physical data. This approach is however subject to many assumptions and subjective decisions. An objective protocol for zonation is being proposed here where abiotic variables are subjected to a statistical approach, using principal components analysis (PCA) and a cluster analysis. The optimal number of clusters (or zones) is being defined using the Calinski-Harabasz criterion. The methodology has been applied on datasets of the Belgian part of the North Sea (BPNS), a shallow sandy shelf environment with a sandbank-swale topography. The BPNS was classified into 8 zones that represent well the natural variability of the seafloor. The internal cluster consistency was validated with a split-run procedure, with more than 99% correspondence between the validation and the original dataset. The ecological relevance of 6 out of the 8 zones was demonstrated, using indicator species analysis. The proposed protocol, as exemplified for the BPNS, can easily be applied to other areas and provides a strong knowledge basis for environmental protection and management of the marine environment. A SWOT-analysis, showing the strengths, weaknesses, opportunities and threats of the protocol was performed.

Renormalization group in the theory of fully developed turbulence. Problem of the infrared relevant corrections to the Navier-Stokes equation

International Nuclear Information System (INIS)

Antonov, N.V.; Borisenok, S.V.; Girina, V.I.

1996-01-01

Within the framework of the renormalization group approach to the theory of fully developed turbulence we consider the problem of possible IR relevant corrections to the Navier-Stokes equation. We formulate an exact criterion of the actual IR relevance of the corrections. In accordance with this criterion we verify the IR relevance for certain classes of composite operators. 17 refs., 2 tabs

Functionally relevant climate variables for arid lands: Aclimatic water deficit approach for modelling desert shrub distributions

Science.gov (United States)

Thomas E. Dilts; Peter J. Weisberg; Camie M. Dencker; Jeanne C. Chambers

2015-01-01

We have three goals. (1) To develop a suite of functionally relevant climate variables for modelling vegetation distribution on arid and semi-arid landscapes of the Great Basin, USA. (2) To compare the predictive power of vegetation distribution models based on mechanistically proximate factors (water deficit variables) and factors that are more mechanistically removed...

Organisationally relevant variables and Keyes's Mental Health Continuum Scale: An exploratory study

Directory of Open Access Journals (Sweden)

Deo J.W. Strümpfer

2009-09-01

Full Text Available In an exploratory study on a sample of convenience (n = 165, 11 self-report variables with presumed organisational  relevance were  related,  as  predictors,  to  the  three  subscores  and  summed  score of  the Keyes  (2005a, 2005b; 2007 Mental Health Continuum  scale  (long  form. Keyes's  scale was administered five to seven days after the first set of scales. The predictor scores were reduced to three factorial scores, labelled positive orientation, negative orientation and positive striving. When classified thus, the predictor variables showed significant and meaningful relationships with some or all of the Keyes subscores and the total score, although few reached medium effect sizes.

The Bohm criterion for rf discharges

International Nuclear Information System (INIS)

Meijer, P.M.; Goedheer, W.J.

1991-01-01

The well-known dc Bohm criterion is extended to rf discharges. Both low- (ω rf much-lt ω pi ) and high-(ω pi much-lt ω rf ) frequency regimes are considered. For low frequencies, the dc Bohm criterion holds. This criterion states that the initial energy of the ions entering the sheath must exceed a limit in order to obtain a stable sheath. For high frequencies, a modified limit is derived, which is somewhat lower than that of the dc Bohm criterion. The resulting ion current density in a high-frequency sheath is only a few percent lower than that for the dc case

Balancing relevance criteria through multi-objective optimization

NARCIS (Netherlands)

van Doorn, J.; Odijk, D.; Roijers, D.M.; de Rijke, M.

2016-01-01

Offline evaluation of information retrieval systems typically focuses on a single effectiveness measure that models the utility for a typical user. Such a measure usually combines a behavior-based rank discount with a notion of document utility that captures the single relevance criterion of

On Feller's criterion for the law of the iterated logarithm

Directory of Open Access Journals (Sweden)

Deli Li

1994-01-01

Full Text Available Combining Feller's criterion with a non-uniform estimate result in the context of the Central Limit Theorem for partial sums of independent random variables, we obtain several results on the Law of the Iterated Logarithm. Two of these results refine corresponding results of Wittmann (1985 and Egorov (1971. In addition, these results are compared with the corresponding results of Teicher (1974, Tomkins (1983 and Tomkins (1990

Towards chaos criterion in quantum field theory

OpenAIRE

Kuvshinov, V. I.; Kuzmin, A. V.

2002-01-01

Chaos criterion for quantum field theory is proposed. Its correspondence with classical chaos criterion in semi-classical regime is shown. It is demonstrated for real scalar field that proposed chaos criterion can be used to investigate stability of classical solutions of field equations.

Suboptimal Criterion Learning in Static and Dynamic Environments.

Directory of Open Access Journals (Sweden)

Elyse H Norton

2017-01-01

Full Text Available Humans often make decisions based on uncertain sensory information. Signal detection theory (SDT describes detection and discrimination decisions as a comparison of stimulus "strength" to a fixed decision criterion. However, recent research suggests that current responses depend on the recent history of stimuli and previous responses, suggesting that the decision criterion is updated trial-by-trial. The mechanisms underpinning criterion setting remain unknown. Here, we examine how observers learn to set a decision criterion in an orientation-discrimination task under both static and dynamic conditions. To investigate mechanisms underlying trial-by-trial criterion placement, we introduce a novel task in which participants explicitly set the criterion, and compare it to a more traditional discrimination task, allowing us to model this explicit indication of criterion dynamics. In each task, stimuli were ellipses with principal orientations drawn from two categories: Gaussian distributions with different means and equal variance. In the covert-criterion task, observers categorized a displayed ellipse. In the overt-criterion task, observers adjusted the orientation of a line that served as the discrimination criterion for a subsequently presented ellipse. We compared performance to the ideal Bayesian learner and several suboptimal models that varied in both computational and memory demands. Under static and dynamic conditions, we found that, in both tasks, observers used suboptimal learning rules. In most conditions, a model in which the recent history of past samples determines a belief about category means fit the data best for most observers and on average. Our results reveal dynamic adjustment of discrimination criterion, even after prolonged training, and indicate how decision criteria are updated over time.

A dimensionless criterion for characterising internal transport barriers in tokamaks

International Nuclear Information System (INIS)

Tresset, G.; Litaudon, X.; Moreau, D.

2000-07-01

A simple criterion, based on a dimensionless parameter (ρ T * =ρ s /L T ) related to drift wave turbulence stabilisation and anomalous transport theory, is proposed in order to characterise the emergence and the space-time evolution of internal transport barriers (ITB's) during a tokamak discharge. The underlying physics which led us to consider the possible relevance of this parameter as a local indicator of a bifurcated plasma state is the breaking of the gyro-Bohm turbulence scaling by the diamagnetic velocity shear, which has been observed in various numerical simulations [e.g. X. Garbet and R.E. Waltz, Phys. Plasmas 3(1996) 1898]. The presence of an ITB is inferred when ρ T * exceeds a threshold value. The main features like the emergence time, location and even dynamics of ITB's can then be summarized on a single graphical representation consistent with measurement uncertainties. The validity of such a criterion is demonstrated on the Optimized Shear (OS) database of JET in several experimental configurations. Large database analysis and realtime control of OS discharges are envisaged as the most attractive applications. (author)

Discrete-time BAM neural networks with variable delays

Science.gov (United States)

Liu, Xin-Ge; Tang, Mei-Lan; Martin, Ralph; Liu, Xin-Bi

2007-07-01

This Letter deals with the global exponential stability of discrete-time bidirectional associative memory (BAM) neural networks with variable delays. Using a Lyapunov functional, and linear matrix inequality techniques (LMI), we derive a new delay-dependent exponential stability criterion for BAM neural networks with variable delays. As this criterion has no extra constraints on the variable delay functions, it can be applied to quite general BAM neural networks with a broad range of time delay functions. It is also easy to use in practice. An example is provided to illustrate the theoretical development.

Discrete-time BAM neural networks with variable delays

International Nuclear Information System (INIS)

Liu Xinge; Tang Meilan; Martin, Ralph; Liu Xinbi

2007-01-01

This Letter deals with the global exponential stability of discrete-time bidirectional associative memory (BAM) neural networks with variable delays. Using a Lyapunov functional, and linear matrix inequality techniques (LMI), we derive a new delay-dependent exponential stability criterion for BAM neural networks with variable delays. As this criterion has no extra constraints on the variable delay functions, it can be applied to quite general BAM neural networks with a broad range of time delay functions. It is also easy to use in practice. An example is provided to illustrate the theoretical development

Unitary Evolution as a Uniqueness Criterion

Science.gov (United States)

Cortez, J.; Mena Marugán, G. A.; Olmedo, J.; Velhinho, J. M.

2015-01-01

It is well known that the process of quantizing field theories is plagued with ambiguities. First, there is ambiguity in the choice of basic variables describing the system. Second, once a choice of field variables has been made, there is ambiguity concerning the selection of a quantum representation of the corresponding canonical commutation relations. The natural strategy to remove these ambiguities is to demand positivity of energy and to invoke symmetries, namely by requiring that classical symmetries become unitarily implemented in the quantum realm. The success of this strategy depends, however, on the existence of a sufficiently large group of symmetries, usually including time-translation invariance. These criteria are therefore generally insufficient in non-stationary situations, as is typical for free fields in curved spacetimes. Recently, the criterion of unitary implementation of the dynamics has been proposed in order to select a unique quantization in the context of manifestly non-stationary systems. Specifically, the unitarity criterion, together with the requirement of invariance under spatial symmetries, has been successfully employed to remove the ambiguities in the quantization of linearly polarized Gowdy models as well as in the quantization of a scalar field with time varying mass, propagating in a static background whose spatial topology is either of a d-sphere (with d = 1, 2, 3) or a three torus. Following Ref. 3, we will see here that the symmetry and unitarity criteria allows for a complete removal of the ambiguities in the quantization of scalar fields propagating in static spacetimes with compact spatial sections, obeying field equations with an explicitly time-dependent mass, of the form ddot φ - Δ φ + s(t)φ = 0 . These results apply in particular to free fields in spacetimes which, like e.g. in the closed FRW models, are conformal to a static spacetime, by means of an exclusively time-dependent conformal factor. In fact, in such

Relevance of Student and Contextual School Variables in Explaining a Student's Severity of Violence Experienced

Science.gov (United States)

Mooij, Ton

2015-01-01

Teachers conceptualise and interpret violent behaviour of secondary students in different ways. They also differ in their estimates of the relevance of student and contextual school variables when explaining the severity of violence experienced by students. Research can assist here by explicating the role of different types of contextual school…

A work criterion for plastic collapse

International Nuclear Information System (INIS)

Muscat, Martin; Mackenzie, Donald; Hamilton, Robert

2003-01-01

A new criterion for evaluating limit and plastic loads in pressure vessel design by analysis is presented. The proposed criterion is based on the plastic work dissipated in the structure as loading progresses and may be used for structures subject to a single load or a combination of multiple loads. Example analyses show that limit and plastic loads given by the plastic work criterion are robust and consistent. The limit and plastic loads are determined purely by the inelastic response of the structure and are not influenced by the initial elastic response: a problem with some established plastic criteria

Some properties of the computable cross-norm criterion for separability

International Nuclear Information System (INIS)

Rudolph, Oliver

2003-01-01

The computable cross-norm (CCN) criterion is a powerful analytical and computable separability criterion for bipartite quantum states, which is also known to systematically detect bound entanglement. In certain aspects this criterion complements the well-known Peres positive partial transpose (PPT) criterion. In the present paper we study important analytical properties of the CCN criterion. We show that in contrast to the PPT criterion it is not sufficient in dimension 2x2. In higher dimensions, theorems connecting the fidelity of a quantum state with the CCN criterion are proved. We also analyze the behavior of the CCN criterion under local operations and identify the operations that leave it invariant. It turns out that the CCN criterion is in general not invariant under local operations

Relevance of student and contextual school variables in explaining a student’s severity of violence experienced

NARCIS (Netherlands)

Mooij, Ton

2015-01-01

Teachers conceptualise and interpret violent behaviour of secondary students in different ways. They also differ in their estimates of the relevance of student and contextual school variables when explaining the severity of violence experienced by students. Research can assist here by explicating

On the ""early-time"" evolution of variables relevant to turbulence models for the Rayleigh-Taylor instability

Energy Technology Data Exchange (ETDEWEB)

Rollin, Bertrand [Los Alamos National Laboratory; Andrews, Malcolm J [Los Alamos National Laboratory

2010-01-01

We present our progress toward setting initial conditions in variable density turbulence models. In particular, we concentrate our efforts on the BHR turbulence model for turbulent Rayleigh-Taylor instability. Our approach is to predict profiles of relevant variables before fully turbulent regime and use them as initial conditions for the turbulence model. We use an idealized model of mixing between two interpenetrating fluids to define the initial profiles for the turbulence model variables. Velocities and volume fractions used in the idealized mixing model are obtained respectively from a set of ordinary differential equations modeling the growth of the Rayleigh-Taylor instability and from an idealization of the density profile in the mixing layer. A comparison between predicted profiles for the turbulence model variables and profiles of the variables obtained from low Atwood number three dimensional simulations show reasonable agreement.

Habitat or matrix: which is more relevant to predict road-kill of vertebrates?

Science.gov (United States)

Bueno, C; Sousa, C O M; Freitas, S R

2015-11-01

We believe that in tropics we need a community approach to evaluate road impacts on wildlife, and thus, suggest mitigation measures for groups of species instead a focal-species approach. Understanding which landscape characteristics indicate road-kill events may also provide models that can be applied in other regions. We intend to evaluate if habitat or matrix is more relevant to predict road-kill events for a group of species. Our hypothesis is: more permeable matrix is the most relevant factor to explain road-kill events. To test this hypothesis, we chose vertebrates as the studied assemblage and a highway crossing in an Atlantic Forest region in southeastern Brazil as the study site. Logistic regression models were designed using presence/absence of road-kill events as dependent variables and landscape characteristics as independent variables, which were selected by Akaike's Information Criterion. We considered a set of candidate models containing four types of simple regression models: Habitat effect model; Matrix types effect models; Highway effect model; and, Reference models (intercept and buffer distance). Almost three hundred road-kills and 70 species were recorded. River proximity and herbaceous vegetation cover, both matrix effect models, were associated to most road-killed vertebrate groups. Matrix was more relevant than habitat to predict road-kill of vertebrates. The association between river proximity and road-kill indicates that rivers may be a preferential route for most species. We discuss multi-species mitigation measures and implications to movement ecology and conservation strategies.

The test-retest reliability and criterion validity of a high-intensity, netball-specific circuit test: The Net-Test.

Science.gov (United States)

Mungovan, Sean F; Peralta, Paula J; Gass, Gregory C; Scanlan, Aaron T

2018-04-12

To examine the test-retest reliability and criterion validity of a high-intensity, netball-specific fitness test. Repeated measures, within-subject design. Eighteen female netball players competing in an international competition completed a trial of the Net-Test, which consists of 14 timed netball-specific movements. Players also completed a series of netball-relevant criterion fitness tests. Ten players completed an additional Net-Test trial one week later to assess test-retest reliability using intraclass correlation coefficient (ICC), typical error of measurement (TEM), and coefficient of variation (CV). The typical error of estimate expressed as CV and Pearson correlations were calculated between each criterion test and Net-Test performance to assess criterion validity. Five movements during the Net-Test displayed moderate ICC (0.84-0.90) and two movements displayed high ICC (0.91-0.93). Seven movements and heart rate taken during the Net-Test held low CV (Test possessed low CV and significant (pTest possesses acceptable reliability for the assessment of netball fitness. Further, the high criterion validity for the Net-Test suggests a range of important netball-specific fitness elements are assessed in combination. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Maximum relevance, minimum redundancy band selection based on neighborhood rough set for hyperspectral data classification

International Nuclear Information System (INIS)

Liu, Yao; Chen, Yuehua; Tan, Kezhu; Xie, Hong; Wang, Liguo; Xie, Wu; Yan, Xiaozhen; Xu, Zhen

2016-01-01

Band selection is considered to be an important processing step in handling hyperspectral data. In this work, we selected informative bands according to the maximal relevance minimal redundancy (MRMR) criterion based on neighborhood mutual information. Two measures MRMR difference and MRMR quotient were defined and a forward greedy search for band selection was constructed. The performance of the proposed algorithm, along with a comparison with other methods (neighborhood dependency measure based algorithm, genetic algorithm and uninformative variable elimination algorithm), was studied using the classification accuracy of extreme learning machine (ELM) and random forests (RF) classifiers on soybeans’ hyperspectral datasets. The results show that the proposed MRMR algorithm leads to promising improvement in band selection and classification accuracy. (paper)

The qualitative criterion of transient angle stability

DEFF Research Database (Denmark)

Lyu, R.; Xue, Y.; Xue, F.

2015-01-01

In almost all the literatures, the qualitative assessment of transient angle stability extracts the angle information of generators based on the swing curve. As the angle (or angle difference) of concern and the threshold value rely strongly on the engineering experience, the validity and robust...... of these criterions are weak. Based on the stability mechanism from the extended equal area criterion (EEAC) theory and combining with abundant simulations of real system, this paper analyzes the criterions in most literatures and finds that the results could be too conservative or too optimistic. It is concluded...

Failure Criterion for Brick Masonry: A Micro-Mechanics Approach

Directory of Open Access Journals (Sweden)

Kawa Marek

2015-02-01

Full Text Available The paper deals with the formulation of failure criterion for an in-plane loaded masonry. Using micro-mechanics approach the strength estimation for masonry microstructure with constituents obeying the Drucker-Prager criterion is determined numerically. The procedure invokes lower bound analysis: for assumed stress fields constructed within masonry periodic cell critical load is obtained as a solution of constrained optimization problem. The analysis is carried out for many different loading conditions at different orientations of bed joints. The performance of the approach is verified against solutions obtained for corresponding layered and block microstructures, which provides the upper and lower strength bounds for masonry microstructure, respectively. Subsequently, a phenomenological anisotropic strength criterion for masonry microstructure is proposed. The criterion has a form of conjunction of Jaeger critical plane condition and Tsai-Wu criterion. The model proposed is identified based on the fitting of numerical results obtained from the microstructural analysis. Identified criterion is then verified against results obtained for different loading orientations. It appears that strength of masonry microstructure can be satisfactorily described by the criterion proposed.

A Failure Criterion for Concrete

DEFF Research Database (Denmark)

Ottosen, N. S.

1977-01-01

A four-parameter failure criterion containing all the three stress invariants explicitly is proposed for short-time loading of concrete. It corresponds to a smooth convex failure surface with curved meridians, which open in the negative direction of the hydrostatic axis, and the trace in the devi......A four-parameter failure criterion containing all the three stress invariants explicitly is proposed for short-time loading of concrete. It corresponds to a smooth convex failure surface with curved meridians, which open in the negative direction of the hydrostatic axis, and the trace...

A new approach to formulating and appraising drug policy: A multi-criterion decision analysis applied to alcohol and cannabis regulation.

Science.gov (United States)

Rogeberg, Ole; Bergsvik, Daniel; Phillips, Lawrence D; van Amsterdam, Jan; Eastwood, Niamh; Henderson, Graeme; Lynskey, Micheal; Measham, Fiona; Ponton, Rhys; Rolles, Steve; Schlag, Anne Katrin; Taylor, Polly; Nutt, David

2018-02-16

Drug policy, whether for legal or illegal substances, is a controversial field that encompasses many complex issues. Policies can have effects on a myriad of outcomes and stakeholders differ in the outcomes they consider and value, while relevant knowledge on policy effects is dispersed across multiple research disciplines making integrated judgements difficult. Experts on drug harms, addiction, criminology and drug policy were invited to a decision conference to develop a multi-criterion decision analysis (MCDA) model for appraising alternative regulatory regimes. Participants collectively defined regulatory regimes and identified outcome criteria reflecting ethical and normative concerns. For cannabis and alcohol separately, participants evaluated each regulatory regime on each criterion and weighted the criteria to provide summary scores for comparing different regimes. Four generic regulatory regimes were defined: absolute prohibition, decriminalisation, state control and free market. Participants also identified 27 relevant criteria which were organised into seven thematically related clusters. State control was the preferred regime for both alcohol and cannabis. The ranking of the regimes was robust to variations in the criterion-specific weights. The MCDA process allowed the participants to deconstruct complex drug policy issues into a set of simpler judgements that led to consensus about the results. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Habitat or matrix: which is more relevant to predict road-kill of vertebrates?

Directory of Open Access Journals (Sweden)

C. Bueno

Full Text Available Abstract We believe that in tropics we need a community approach to evaluate road impacts on wildlife, and thus, suggest mitigation measures for groups of species instead a focal-species approach. Understanding which landscape characteristics indicate road-kill events may also provide models that can be applied in other regions. We intend to evaluate if habitat or matrix is more relevant to predict road-kill events for a group of species. Our hypothesis is: more permeable matrix is the most relevant factor to explain road-kill events. To test this hypothesis, we chose vertebrates as the studied assemblage and a highway crossing in an Atlantic Forest region in southeastern Brazil as the study site. Logistic regression models were designed using presence/absence of road-kill events as dependent variables and landscape characteristics as independent variables, which were selected by Akaike’s Information Criterion. We considered a set of candidate models containing four types of simple regression models: Habitat effect model; Matrix types effect models; Highway effect model; and, Reference models (intercept and buffer distance. Almost three hundred road-kills and 70 species were recorded. River proximity and herbaceous vegetation cover, both matrix effect models, were associated to most road-killed vertebrate groups. Matrix was more relevant than habitat to predict road-kill of vertebrates. The association between river proximity and road-kill indicates that rivers may be a preferential route for most species. We discuss multi-species mitigation measures and implications to movement ecology and conservation strategies.

Plasma sheath criterion in thermal electronegative plasmas

International Nuclear Information System (INIS)

Ghomi, Hamid; Khoramabadi, Mansour; Ghorannevis, Mahmod; Shukla, Padma Kant

2010-01-01

The sheath formation criterion in electronegative plasma is examined. By using a multifluid model, it is shown that in a collisional sheath there will be upper as well as lower limits for the sheath velocity criterion. However, the parameters of the negative ions only affect the lower limit.

A termination criterion for parameter estimation in stochastic models in systems biology.

Science.gov (United States)

Zimmer, Christoph; Sahle, Sven

2015-11-01

Parameter estimation procedures are a central aspect of modeling approaches in systems biology. They are often computationally expensive, especially when the models take stochasticity into account. Typically parameter estimation involves the iterative optimization of an objective function that describes how well the model fits some measured data with a certain set of parameter values. In order to limit the computational expenses it is therefore important to apply an adequate stopping criterion for the optimization process, so that the optimization continues at least until a reasonable fit is obtained, but not much longer. In the case of stochastic modeling, at least some parameter estimation schemes involve an objective function that is itself a random variable. This means that plain convergence tests are not a priori suitable as stopping criteria. This article suggests a termination criterion suited to optimization problems in parameter estimation arising from stochastic models in systems biology. The termination criterion is developed for optimization algorithms that involve populations of parameter sets, such as particle swarm or evolutionary algorithms. It is based on comparing the variance of the objective function over the whole population of parameter sets with the variance of repeated evaluations of the objective function at the best parameter set. The performance is demonstrated for several different algorithms. To test the termination criterion we choose polynomial test functions as well as systems biology models such as an Immigration-Death model and a bistable genetic toggle switch. The genetic toggle switch is an especially challenging test case as it shows a stochastic switching between two steady states which is qualitatively different from the model behavior in a deterministic model. Copyright © 2015. Published by Elsevier Ireland Ltd.

A pellet-clad interaction failure criterion

International Nuclear Information System (INIS)

Howl, D.A.; Coucill, D.N.; Marechal, A.J.C.

1983-01-01

A Pellet-Clad Interaction (PCI) failure criterion, enabling the number of fuel rod failures in a reactor core to be determined for a variety of normal and fault conditions, is required for safety analysis. The criterion currently being used for the safety analysis of the Pressurized Water Reactor planned for Sizewell in the UK is defined and justified in this paper. The criterion is based upon a threshold clad stress which diminishes with increasing fast neutron dose. This concept is consistent with the mechanism of clad failure being stress corrosion cracking (SCC); providing excess corrodant is always present, the dominant parameter determining the propagation of SCC defects is stress. In applying the criterion, the SLEUTH-SEER 77 fuel performance computer code is used to calculate the peak clad stress, allowing for concentrations due to pellet hourglassing and the effect of radial cracks in the fuel. The method has been validated by analysis of PCI failures in various in-reactor experiments, particularly in the well-characterised power ramp tests in the Steam Generating Heavy Water Reactor (SGHWR) at Winfrith. It is also in accord with out-of-reactor tests with iodine and irradiated Zircaloy clad, such as those carried out at Kjeller in Norway. (author)

A multipole acceptability criterion for electronic structure theory

International Nuclear Information System (INIS)

Schwegler, E.; Challacombe, M.; Head-Gordon, M.

1998-01-01

Accurate and computationally inexpensive estimates of multipole expansion errors are crucial to the success of several fast electronic structure methods. In this paper, a new nonempirical multipole acceptability criterion is described that is directly applicable to expansions of high order moments. Several model calculations typical of electronic structure theory are presented to demonstrate its performance. For cases involving small translation distances, accuracies are increased by up to five orders of magnitude over an empirical criterion. The new multipole acceptance criterion is on average within an order of magnitude of the exact expansion error. Use of the multipole acceptance criterion in hierarchical multipole based methods as well as in traditional electronic structure methods is discussed. copyright 1998 American Institute of Physics

Nonparametric adaptive age replacement with a one-cycle criterion

International Nuclear Information System (INIS)

Coolen-Schrijner, P.; Coolen, F.P.A.

2007-01-01

Age replacement of technical units has received much attention in the reliability literature over the last four decades. Mostly, the failure time distribution for the units is assumed to be known, and minimal costs per unit of time is used as optimality criterion, where renewal reward theory simplifies the mathematics involved but requires the assumption that the same process and replacement strategy continues over a very large ('infinite') period of time. Recently, there has been increasing attention to adaptive strategies for age replacement, taking into account the information from the process. Although renewal reward theory can still be used to provide an intuitively and mathematically attractive optimality criterion, it is more logical to use minimal costs per unit of time over a single cycle as optimality criterion for adaptive age replacement. In this paper, we first show that in the classical age replacement setting, with known failure time distribution with increasing hazard rate, the one-cycle criterion leads to earlier replacement than the renewal reward criterion. Thereafter, we present adaptive age replacement with a one-cycle criterion within the nonparametric predictive inferential framework. We study the performance of this approach via simulations, which are also used for comparisons with the use of the renewal reward criterion within the same statistical framework

Unified Bohm criterion

Energy Technology Data Exchange (ETDEWEB)

Kos, L. [LECAD Laboratory, Faculty of Mechanical Engineering, University of Ljubljana, SI-1000 Ljubljana (Slovenia); Tskhakaya, D. D.; Jelić, N. [Institute for Theoretical Physics, Fusion@ÖAW, University of Innsbruck, A-6020 Innsbruck (Austria)

2015-09-15

Recent decades have seen research into the conditions necessary for the formation of the monotonic potential shape in the sheath, appearing at the plasma boundaries like walls, in fluid, and kinetic approximations separately. Although either of these approaches yields a formulation commonly known as the much-acclaimed Bohm criterion (BC), the respective results involve essentially different physical quantities that describe the ion gas behavior. In the fluid approach, such a quantity is clearly identified as the ion directional velocity. In the kinetic approach, the ion behavior is formulated via a quantity (the squared inverse velocity averaged by the ion distribution function) without any clear physical significance, which is, moreover, impractical. In the present paper, we try to explain this difference by deriving a condition called here the Unified Bohm Criterion, which combines an advanced fluid model with an upgraded explicit kinetic formula in a new form of the BC. By introducing a generalized polytropic coefficient function, the unified BC can be interpreted in a form that holds, irrespective of whether the ions are described kinetically or in the fluid approximation.

Reactor instrumentation. Definition of the single failure criterion

International Nuclear Information System (INIS)

1980-12-01

The standard defines the single failure criterion which is used in other IEC publications on reactor safety systems. The purpose of the single failure criterion is the assurance of minimum redundancy. (orig./HP) [de

Modified Schur-Cohn Criterion for Stability of Delayed Systems

Directory of Open Access Journals (Sweden)

Juan Ignacio Mulero-Martínez

2015-01-01

Full Text Available A modified Schur-Cohn criterion for time-delay linear time-invariant systems is derived. The classical Schur-Cohn criterion has two main drawbacks; namely, (i the dimension of the Schur-Cohn matrix generates some round-off errors eventually resulting in a polynomial of s with erroneous coefficients and (ii imaginary roots are very hard to detect when numerical errors creep in. In contrast to the classical Schur-Cohn criterion an alternative approach is proposed in this paper which is based on the application of triangular matrices over a polynomial ring in a similar way as in the Jury test of stability for discrete systems. The advantages of the proposed approach are that it halves the dimension of the polynomial and it only requires seeking real roots, making this modified criterion comparable to the Rekasius substitution criterion.

FFTBM and primary pressure acceptance criterion

International Nuclear Information System (INIS)

Prosek, A.

2004-01-01

When thermalhydraulic computer codes are used for simulation in the area of nuclear engineering the question is how to conduct an objective comparison between the code calculation and measured data. To answer this the fast Fourier transform based method (FFTBM) was developed. When the FFTBM method was developed the acceptance criteria for primary pressure and total accuracy were set. In the recent study the FFTBM method was used for accuracy quantification of RD-14M large LOCA test B9401 calculations. The blind accuracy analysis indicated good total accuracy while the primary pressure criterion was not fulfilled. The objective of the study was therefore to investigate the reasons for not fulfilling the primary pressure acceptance criterion and the applicability of the criterion to experimental facilities simulating heavy water reactor. The results of the open quantitative analysis showed that sensitivity analysis for influence parameters provide sufficient information to judge in which calculation the accuracy of primary pressure is acceptable. (author)

Does the Lowest Bid Price Evaluation Criterion Make for a More Efficient Public Procurement Selection Criterion? (Case of the Czech Republic

Directory of Open Access Journals (Sweden)

Ochrana František

2015-06-01

Full Text Available Through the institute of public procurement a considerable volume of financial resources is allocated. It is therefore in the interest of contracting entities to seek ways of how to achieve an efficient allocation of resources. Some public contract-awarding entities, along with some public-administration authorities in the Czech Republic, believe that the use of a single evaluation criterion (the lowest bid price results in a more efficient tender for a public contract. It was found that contracting entities in the Czech Republic strongly prefer to use the lowest bid price criterion. Within the examined sample, 86.5 % of public procurements were evaluated this way. The analysis of the examined sample of public contracts proved that the choice of an evaluation criterion, even the preference of the lowest bid price criterion, does not have any obvious impact on the final cost of a public contract. The study concludes that it is inappropriate to prefer the criterion of the lowest bid price within the evaluation of public contracts that are characterised by their complexity (including public contracts for construction works and public service contracts. The findings of the Supreme Audit Office related to the inspection of public contracts indicate that when using the lowest bid price as an evaluation criterion, a public contract may indeed be tendered with the lowest bid price, but not necessarily the best offer in terms of supplied quality. It is therefore not appropriate to use the lowest bid price evaluation criterion to such an extent for the purpose of evaluating work and services. Any improvement to this situation requires a corresponding amendment to the Law on Public Contracts and mainly a radical change in the attitude of the Office for the Protection of Competition towards proposed changes, as indicated within the conclusions and recommendations proposed by this study.

The Role of Relevance in Education Research, as Viewed by Former Presidents

Science.gov (United States)

Snow, Catherine E.

2016-01-01

American Educational Research Association presidents' presidential addresses have only intermittently considered relevance as a criterion of quality for education research. A few, though, argued that education research could only distinguish itself from research in the disciplines through attention to improving educational outcomes. David…

Ginzburg criterion for ionic fluids: the effect of Coulomb interactions.

Science.gov (United States)

Patsahan, O

2013-08-01

The effect of the Coulomb interactions on the crossover between mean-field and Ising critical behavior in ionic fluids is studied using the Ginzburg criterion. We consider the charge-asymmetric primitive model supplemented by short-range attractive interactions in the vicinity of the gas-liquid critical point. The model without Coulomb interactions exhibiting typical Ising critical behavior is used to calibrate the Ginzburg temperature of the systems comprising electrostatic interactions. Using the collective variables method, we derive a microscopic-based effective Hamiltonian for the full model. We obtain explicit expressions for all the relevant Hamiltonian coefficients within the framework of the same approximation, i.e., the one-loop approximation. Then we consistently calculate the reduced Ginzburg temperature t(G) for both the purely Coulombic model (a restricted primitive model) and the purely nonionic model (a hard-sphere square-well model) as well as for the model parameters ranging between these two limiting cases. Contrary to the previous theoretical estimates, we obtain the reduced Ginzburg temperature for the purely Coulombic model to be about 20 times smaller than for the nonionic model. For the full model including both short-range and long-range interactions, we show that t(G) approaches the value found for the purely Coulombic model when the strength of the Coulomb interactions becomes sufficiently large. Our results suggest a key role of Coulomb interactions in the crossover behavior observed experimentally in ionic fluids as well as confirm the Ising-like criticality in the Coulomb-dominated ionic systems.

Angular criterion for distinguishing between Fraunhofer and Fresnel diffraction

International Nuclear Information System (INIS)

Medina, Francisco F.; Garcia-Sucerquia, Jorge; Castaneda, Roman; Matteucci, Giorgio

2003-03-01

The distinction between Fresnel and Fraunhofer diffraction is a crucial condition for the accurate analysis of diffracting structures. In this paper we propose a criterion based on the angle subtended by the first zero of the diffraction pattern from the center of the diffracting aperture. The determination of the zero of the diffraction pattern is the crucial point for assuring the precision of the criterion. It mainly depends on the dynamical range of the detector. Therefore, the applicability of adequate thresholds for different detector types is discussed. The criterion is also generalized by expressing it in terms of the number of Fresnel zones delimited by the aperture. Simulations are reported for illustrating the feasibility of the criterion. (author)

Application of the single failure criterion

International Nuclear Information System (INIS)

1990-01-01

In order to present further details on the application and interpretation and on the limitations of individual concepts in the NUSS Codes and Safety Guides, a series of Safety Practice publications have been initiated. It is hoped that many Member States will be able to benefit from the experience presented in these books. The present publication will be useful not only to regulators but also to designers and could be particularly helpful in the interpretation of cases which fall on the borderline between the two areas. It should assist in clarifying, by way of examples, many of the concepts and implementation methods. It also describes some of the limitations involved. The book addresses a specialized topic and it is recommended that it be used together with the other books in the Safety Series. During the development of this publication the actual practices of all countries with major reactor programmes has been taken into account. An interpretation of the relevant text of the Design Code is given in the light of these national practices. The criterion is put into perspective with the general reliability requirements in which it is also embedded in the Design Code. Its relation to common cause and other multiple failure cases and also to the temporary disengagement of components in systems important to safety is clarified. Its use and its limitations are thus explained in the context of reliability targets for systems performance. The guidance provided applies to all reactor systems and would be applicable even to systems not in nuclear power plants. But since this publication was developed to give an interpretation of a specific requirement of the Design Code, the broader applicability is not explicitly claimed. The Design Code lists three cases for which compliance with the criterion may not be justified. The present publication assists in the more precise and practical identification of those cases. 9 figs, 1 tab

ClustOfVar: An R Package for the Clustering of Variables

Directory of Open Access Journals (Sweden)

Marie Chavent

2012-09-01

Full Text Available Clustering of variables is as a way to arrange variables into homogeneous clusters, i.e., groups of variables which are strongly related to each other and thus bring the same information. These approaches can then be useful for dimension reduction and variable selection. Several specific methods have been developed for the clustering of numerical variables. However concerning qualitative variables or mixtures of quantitative and qualitative variables, far fewer methods have been proposed. The R package ClustOfVar was specifically developed for this purpose. The homogeneity criterion of a cluster is defined as the sum of correlation ratios (for qualitative variables and squared correlations (for quantitative variables to a synthetic quantitative variable, summarizing ``as good as possible'' the variables in the cluster. This synthetic variable is the first principal component obtained with the PCAMIX method. Two clustering algorithms are proposed to optimize the homogeneity criterion: iterative relocation algorithm and ascendant hierarchical clustering. We also propose a bootstrap approach in order to determine suitable numbers of clusters. We illustrate the methodologies and the associated package on small datasets.

Criterion for testing multiparticle negative-partial-transpose entanglement

International Nuclear Information System (INIS)

Zeng, B.; Zhou, D.L.; Zhang, P.; Xu, Z.; You, L.

2003-01-01

We revisit the criterion of multiparticle entanglement based on the overlaps of a given quantum state ρ with maximally entangled states. For a system of m particles, each with N distinct states, we prove that ρ is m-particle negative partial transpose entangled, if there exists a maximally entangled state vertical bar MES>, such that >1/N. While this sufficiency condition is weaker than the Peres-Horodecki criterion in all cases, it applies to multi-particle systems, and becomes especially useful when the number of particles (m) is large. We also consider the converse of this criterion and illustrate its invalidity with counter examples

Evaluation of Validity and Reliability for Hierarchical Scales Using Latent Variable Modeling

Science.gov (United States)

Raykov, Tenko; Marcoulides, George A.

2012-01-01

A latent variable modeling method is outlined, which accomplishes estimation of criterion validity and reliability for a multicomponent measuring instrument with hierarchical structure. The approach provides point and interval estimates for the scale criterion validity and reliability coefficients, and can also be used for testing composite or…

A new frequency-domain criterion for elimination of limit cycles in fixed-point state-space digital filters using saturation arithmetic

International Nuclear Information System (INIS)

Singh, Vimal

2007-01-01

In [Singh V. Elimination of overflow oscillations in fixed-point state-space digital filters using saturation arithmetic. IEEE Trans Circ Syst 1990;37(6):814-8], a frequency-domain criterion for the suppression of limit cycles in fixed-point state-space digital filters using saturation overflow arithmetic was presented. The passivity property owing to the presence of multiple saturation nonlinearities was exploited therein. In the present paper, a new notion of passivity, namely, that involving the state variables is considered, thereby arriving at an entirely new frequency-domain criterion for the suppression of limit cycles in such filters

Towards identification of relevant variables in the observed aerosol optical depth bias between MODIS and AERONET observations

Science.gov (United States)

Malakar, N. K.; Lary, D. J.; Gencaga, D.; Albayrak, A.; Wei, J.

2013-08-01

Measurements made by satellite remote sensing, Moderate Resolution Imaging Spectroradiometer (MODIS), and globally distributed Aerosol Robotic Network (AERONET) are compared. Comparison of the two datasets measurements for aerosol optical depth values show that there are biases between the two data products. In this paper, we present a general framework towards identifying relevant set of variables responsible for the observed bias. We present a general framework to identify the possible factors influencing the bias, which might be associated with the measurement conditions such as the solar and sensor zenith angles, the solar and sensor azimuth, scattering angles, and surface reflectivity at the various measured wavelengths, etc. Specifically, we performed analysis for remote sensing Aqua-Land data set, and used machine learning technique, neural network in this case, to perform multivariate regression between the ground-truth and the training data sets. Finally, we used mutual information between the observed and the predicted values as the measure of similarity to identify the most relevant set of variables. The search is brute force method as we have to consider all possible combinations. The computations involves a huge number crunching exercise, and we implemented it by writing a job-parallel program.

SOCIO-PSYCHOLOGICAL CRITERIONS OF FAMILY LIFESTYLE TYPOLOGY

Directory of Open Access Journals (Sweden)

Yekaterina Anatolievna Yumkina

2015-02-01

Full Text Available The purpose of this article is to present socio-psychological criterions of family lifestyle typology, which were found during theoretical modelling and empirical research work. It is important in fundamental and practical aspects. St-Petersburg students (n = 116, from 19 to 21 years old were examined by special questionnaire «Family relationship and home» (Kunitsi-na V.N., Yumkina Ye.A., 2012 which measures different aspects of family lifestyle. We also used complex of methods that gave us information about personal values, self-rating and parent-child relationships. Dates were divided into six groups according to three main criterions of family lifestyle typology: social environment of family life, family activity, and family interpersonal relationships. There were found statistically significant differences between pairs of group from every criterions. The results can be useful in spheres dealing with family crisis, family development, family traditions etc.

Industry Software Trustworthiness Criterion Research Based on Business Trustworthiness

Science.gov (United States)

Zhang, Jin; Liu, Jun-fei; Jiao, Hai-xing; Shen, Yi; Liu, Shu-yuan

To industry software Trustworthiness problem, an idea aiming to business to construct industry software trustworthiness criterion is proposed. Based on the triangle model of "trustworthy grade definition-trustworthy evidence model-trustworthy evaluating", the idea of business trustworthiness is incarnated from different aspects of trustworthy triangle model for special industry software, power producing management system (PPMS). Business trustworthiness is the center in the constructed industry trustworthy software criterion. Fusing the international standard and industry rules, the constructed trustworthy criterion strengthens the maneuverability and reliability. Quantitive evaluating method makes the evaluating results be intuitionistic and comparable.

Two novel synchronization criterions for a unified chaotic system

International Nuclear Information System (INIS)

Tao Chaohai; Xiong Hongxia; Hu Feng

2006-01-01

Two novel synchronization criterions are proposed in this paper. It includes drive-response synchronization and adaptive synchronization schemes. Moreover, these synchronization criterions can be applied to a large class of chaotic systems and are very useful for secure communication

Convergence criterion for branched contіnued fractions of the special form with positive elements

Directory of Open Access Journals (Sweden)

D. I. Bodnar

2017-07-01

Full Text Available In this paper the problem of convergence of the important type of a multidimensional generalization of continued fractions, the branched continued fractions with independent variables, is considered. This fractions are an efficient apparatus for the approximation of multivariable functions, which are represented by multiple power series. When variables are fixed these fractions are called the branched continued fractions of the special form. Their structure is much simpler then the structure of general branched continued fractions. It has given a possibility to establish the necessary and sufficient conditions of convergence of branched continued fractions of the special form with the positive elements. The received result is the multidimensional analog of Seidel's criterion for the continued fractions. The condition of convergence of investigated fractions is the divergence of series, whose elements are continued fractions. Therefore, the sufficient condition of the convergence of this fraction which has been formulated by the divergence of series composed of partial denominators of this fraction, is established. Using the established criterion and Stieltjes-Vitali Theorem the parabolic theorems of branched continued fractions of the special form with complex elements convergence, is investigated. The sufficient conditions gave a possibility to make the condition of convergence of the branched continued fractions of the special form, whose elements lie in parabolic domains.

A scale invariance criterion for LES parametrizations

Directory of Open Access Journals (Sweden)

Urs Schaefer-Rolffs

2015-01-01

Full Text Available Turbulent kinetic energy cascades in fluid dynamical systems are usually characterized by scale invariance. However, representations of subgrid scales in large eddy simulations do not necessarily fulfill this constraint. So far, scale invariance has been considered in the context of isotropic, incompressible, and three-dimensional turbulence. In the present paper, the theory is extended to compressible flows that obey the hydrostatic approximation, as well as to corresponding subgrid-scale parametrizations. A criterion is presented to check if the symmetries of the governing equations are correctly translated into the equations used in numerical models. By applying scaling transformations to the model equations, relations between the scaling factors are obtained by demanding that the mathematical structure of the equations does not change.The criterion is validated by recovering the breakdown of scale invariance in the classical Smagorinsky model and confirming scale invariance for the Dynamic Smagorinsky Model. The criterion also shows that the compressible continuity equation is intrinsically scale-invariant. The criterion also proves that a scale-invariant turbulent kinetic energy equation or a scale-invariant equation of motion for a passive tracer is obtained only with a dynamic mixing length. For large-scale atmospheric flows governed by the hydrostatic balance the energy cascade is due to horizontal advection and the vertical length scale exhibits a scaling behaviour that is different from that derived for horizontal length scales.

Decision criterion dynamics in animals performing an auditory detection task.

Directory of Open Access Journals (Sweden)

Robert W Mill

Full Text Available Classical signal detection theory attributes bias in perceptual decisions to a threshold criterion, against which sensory excitation is compared. The optimal criterion setting depends on the signal level, which may vary over time, and about which the subject is naïve. Consequently, the subject must optimise its threshold by responding appropriately to feedback. Here a series of experiments was conducted, and a computational model applied, to determine how the decision bias of the ferret in an auditory signal detection task tracks changes in the stimulus level. The time scales of criterion dynamics were investigated by means of a yes-no signal-in-noise detection task, in which trials were grouped into blocks that alternately contained easy- and hard-to-detect signals. The responses of the ferrets implied both long- and short-term criterion dynamics. The animals exhibited a bias in favour of responding "yes" during blocks of harder trials, and vice versa. Moreover, the outcome of each single trial had a strong influence on the decision at the next trial. We demonstrate that the single-trial and block-level changes in bias are a manifestation of the same criterion update policy by fitting a model, in which the criterion is shifted by fixed amounts according to the outcome of the previous trial and decays strongly towards a resting value. The apparent block-level stabilisation of bias arises as the probabilities of outcomes and shifts on single trials mutually interact to establish equilibrium. To gain an intuition into how stable criterion distributions arise from specific parameter sets we develop a Markov model which accounts for the dynamic effects of criterion shifts. Our approach provides a framework for investigating the dynamics of decisions at different timescales in other species (e.g., humans and in other psychological domains (e.g., vision, memory.

Blind equalization with criterion with memory nonlinearity

Science.gov (United States)

Chen, Yuanjie; Nikias, Chrysostomos L.; Proakis, John G.

1992-06-01

Blind equalization methods usually combat the linear distortion caused by a nonideal channel via a transversal filter, without resorting to the a priori known training sequences. We introduce a new criterion with memory nonlinearity (CRIMNO) for the blind equalization problem. The basic idea of this criterion is to augment the Godard [or constant modulus algorithm (CMA)] cost function with additional terms that penalize the autocorrelations of the equalizer outputs. Several variations of the CRIMNO algorithms are derived, with the variations dependent on (1) whether the empirical averages or the single point estimates are used to approximate the expectations, (2) whether the recent or the delayed equalizer coefficients are used, and (3) whether the weights applied to the autocorrelation terms are fixed or are allowed to adapt. Simulation experiments show that the CRIMNO algorithm, and especially its adaptive weight version, exhibits faster convergence speed than the Godard (or CMA) algorithm. Extensions of the CRIMNO criterion to accommodate the case of correlated inputs to the channel are also presented.

Importance biasing quality criterion based on contribution response theory

International Nuclear Information System (INIS)

Borisov, N.M.; Panin, M.P.

2001-01-01

The report proposes a visual criterion of importance biasing both of forward and adjoint simulation. The similarity of contribution Monte Carlo and importance biasing random collision event distribution is proved. The conservation of total number of random trajectory crossings of surfaces, which separate the source and the detector is proposed as importance biasing quality criterion. The use of this criterion is demonstrated on the example of forward vs. adjoint importance biasing in gamma ray deep penetration problem. The larger amount of published data on forward field characteristics than on adjoint leads to the more accurate approximation of adjoint importance function in comparison to forward, for it adjoint importance simulation is more effective than forward. The proposed criterion indicates it visually, showing the most uniform distribution of random trajectory crossing events for the most effective importance biasing parameters and pointing to the direction of tuning importance biasing parameters. (orig.)

General stability criterion for inviscid parallel flow

International Nuclear Information System (INIS)

Sun Liang

2007-01-01

Arnol'd's second stability theorem is approached from an elementary point of view. First, a sufficient criterion for stability is found analytically as either -μ 1 s ) s ) in the flow, where U s is the velocity at the inflection point, and μ 1 is the eigenvalue of Poincare's problem. Second, this criterion is generalized to barotropic geophysical flows in the β plane. And the connections between present criteria and Arnol'd's nonlinear criteria are also discussed. The proofs are completely elementary and so could be used to teach undergraduate students

The Concept of Performance Levels in Criterion-Referenced Assessment.

Science.gov (United States)

Hewitson, Mal

The concept of performance levels in criterion-referenced assessment is explored by applying the idea to different types of tests commonly used in schools, mastery tests (including diagnostic tests) and achievement tests. In mastery tests, a threshold performance standard must be established for each criterion. Attainment of this threshold…

Heterogeneity of Prognostic Profiles in Non-small Cell Lung Cancer: Too Many Variables but a Few Relevant

International Nuclear Information System (INIS)

Camara, Agustin Gomez de la; Lopez-Encuentra, Angel; Ferrando, Paloma

2005-01-01

Objective: Many prognostic factors, exceeding 150, for non-small cell lung cancer (NSCLC) are mentioned in the literature. The different statistical weight of the some variables at issue, their heterogeneity and their clinical uselessness is reviewed. Study design and setting: Survival analysis of a cohort of NSCLC operated (n = 1730, 1993-1997) was carried out utilizing different statistical approaches: Cox proportional hazard analysis (CPHA), logistic regression (LRA), and recursive partitioning (CART). Results: CPHA identified 13 prognostic variables and 11 LRA. Of the 17 possible variables, 10 are coincident. CART provided five different diagnostic groups but only three differentiated survival levels. Parsimonious models were constructed including only T and N cancer staging variables. Areas under the ROC curve of 0.68 and 0.68 were found for CPHA and LGA parsimonious models respectively, and 0.72 and 0.71 for complete models. Conclusion: Variables with a minimal impact on the respective models and thus with little or scarce predictive clinical repercussion were identified. Differences in the prognostic profile of survival can be caused by the different methodological approaches used. No relevant differences were found between the parsimonious and complete models. Although the amount of information managed is considerable, there continues to be a large predictive gap yet to be explained

Using Akaike's information theoretic criterion in mixed-effects modeling of pharmacokinetic data: a simulation study [version 3; referees: 2 approved, 1 approved with reservations

Directory of Open Access Journals (Sweden)

Erik Olofsen

2015-07-01

Full Text Available Akaike's information theoretic criterion for model discrimination (AIC is often stated to "overfit", i.e., it selects models with a higher dimension than the dimension of the model that generated the data. However, with experimental pharmacokinetic data it may not be possible to identify the correct model, because of the complexity of the processes governing drug disposition. Instead of trying to find the correct model, a more useful objective might be to minimize the prediction error of drug concentrations in subjects with unknown disposition characteristics. In that case, the AIC might be the selection criterion of choice. We performed Monte Carlo simulations using a model of pharmacokinetic data (a power function of time with the property that fits with common multi-exponential models can never be perfect - thus resembling the situation with real data. Prespecified models were fitted to simulated data sets, and AIC and AICc (the criterion with a correction for small sample sizes values were calculated and averaged. The average predictive performances of the models, quantified using simulated validation sets, were compared to the means of the AICs. The data for fits and validation consisted of 11 concentration measurements each obtained in 5 individuals, with three degrees of interindividual variability in the pharmacokinetic volume of distribution. Mean AICc corresponded very well, and better than mean AIC, with mean predictive performance. With increasing interindividual variability, there was a trend towards larger optimal models, but with respect to both lowest AICc and best predictive performance. Furthermore, it was observed that the mean square prediction error itself became less suitable as a validation criterion, and that a predictive performance measure should incorporate interindividual variability. This simulation study showed that, at least in a relatively simple mixed-effects modelling context with a set of prespecified models

A criterion for heated pipe design by linear electric resistances

International Nuclear Information System (INIS)

Bloch, M.; Cruz, J.R.B.

1984-01-01

A criterion for linear eletrical elements instalation on horizontal tubes is obtainned in this work. This criterion is based upon the calculation of the thermal stresses caused by the non uniform temperature distribution in the tube cross section. The finite difference method and the SAP IV computer code are both used in the calculations. The criterion is applied to the thermal circuits of the IEN which has tube diameter varying from φ 1/2 in till φ 8 in. (author) [pt

Determination of the relevant market as a criterion of assessment of concentration effects in the practice of antitrust authorities

Directory of Open Access Journals (Sweden)

Daria Kostecka-Jurczyk

2012-12-01

Full Text Available Determining the relevant market is the first and the most important step in antimonopoly proceedings due to the fact that the market position of an enterprise is always determined from the relevant market perspective. In respect of mergers, establishing the relevant market is essential in analysing whether the aim of the concentration is to distort and limit competition on the market. The author of the article focuses on describing methods for determining the relevant market applied by antimonopoly authorities.

Novel global robust stability criterion for neural networks with delay

International Nuclear Information System (INIS)

Singh, Vimal

2009-01-01

A novel criterion for the global robust stability of Hopfield-type interval neural networks with delay is presented. An example illustrating the improvement of the present criterion over several recently reported criteria is given.

Numerical and Experimental Validation of a New Damage Initiation Criterion

Science.gov (United States)

Sadhinoch, M.; Atzema, E. H.; Perdahcioglu, E. S.; van den Boogaard, A. H.

2017-09-01

Most commercial finite element software packages, like Abaqus, have a built-in coupled damage model where a damage evolution needs to be defined in terms of a single fracture energy value for all stress states. The Johnson-Cook criterion has been modified to be Lode parameter dependent and this Modified Johnson-Cook (MJC) criterion is used as a Damage Initiation Surface (DIS) in combination with the built-in Abaqus ductile damage model. An exponential damage evolution law has been used with a single fracture energy value. Ultimately, the simulated force-displacement curves are compared with experiments to validate the MJC criterion. 7 out of 9 fracture experiments were predicted accurately. The limitations and accuracy of the failure predictions of the newly developed damage initiation criterion will be discussed shortly.

Prediction of Hot Tearing Using a Dimensionless Niyama Criterion

Science.gov (United States)

Monroe, Charles; Beckermann, Christoph

2014-08-01

The dimensionless form of the well-known Niyama criterion is extended to include the effect of applied strain. Under applied tensile strain, the pressure drop in the mushy zone is enhanced and pores grow beyond typical shrinkage porosity without deformation. This porosity growth can be expected to align perpendicular to the applied strain and to contribute to hot tearing. A model to capture this coupled effect of solidification shrinkage and applied strain on the mushy zone is derived. The dimensionless Niyama criterion can be used to determine the critical liquid fraction value below which porosity forms. This critical value is a function of alloy properties, solidification conditions, and strain rate. Once a dimensionless Niyama criterion value is obtained from thermal and mechanical simulation results, the corresponding shrinkage and deformation pore volume fractions can be calculated. The novelty of the proposed method lies in using the critical liquid fraction at the critical pressure drop within the mushy zone to determine the onset of hot tearing. The magnitude of pore growth due to shrinkage and deformation is plotted as a function of the dimensionless Niyama criterion for an Al-Cu alloy as an example. Furthermore, a typical hot tear "lambda"-shaped curve showing deformation pore volume as a function of alloy content is produced for two Niyama criterion values.

Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue

Directory of Open Access Journals (Sweden)

Andrea Carpinteri

2017-07-01

Full Text Available In the present paper, the multiaxial fatigue life assessment of notched structural components is performed by employing a strain-based multiaxial fatigue criterion. Such a criterion, depending on the critical plane concept, is extended by implementing the control volume concept reated to the Strain Energy Density (SED approach: a material point located at a certain distance from the notch tip is assumed to be the verification point where to perform the above assessment. Such a distance, measured along the notch bisector, is a function of both the biaxiality ratio (defined as the ratio between the applied shear stress amplitude and the normal stress amplitude and the control volume radii under Mode I and Mode III. Once the position of the verification point is determined, the fatigue lifetime is assessed through an equivalent strain amplitude, acting on the critical plane, together with a unique material reference curve (i.e. the Manson-Coffin curve. Some uniaxial and multiaxial fatigue data related to V-notched round bars made of titanium grade 5 alloy (Ti-6Al-4V are examined to validate the present criterion.

Distance criterion for hydrogen bond

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Distance criterion for hydrogen bond. In a D-H ...A contact, the D...A distance must be less than the sum of van der Waals Radii of the D and A atoms, for it to be a hydrogen bond.

P2-17: Individual Differences in Dynamic Criterion Shifts during Perceptual Decision Making

Directory of Open Access Journals (Sweden)

Issac Rhim

2012-10-01

Full Text Available Perceptual decision-making involves placing an optimal criterion on the axis of encoded sensory evidence to maximize outcomes for choices. Optimal criterion setting becomes critical particularly when neural representations of sensory inputs are noisy and feedbacks for perceptual choices vary over time in an unpredictable manner. Here we monitored time courses of decision criteria that are adopted by human subjects while abruptly shifting the criterion of stochastic feedback to perceptual choices with certain amounts in an unpredictable direction and at an unpredictable point of time. Subjects viewed a brief (0.3 s, thin (.07 deg annulus around the fixation and were forced to judge whether the annulus was smaller or larger than an unknown boundary. We estimated moment-to-moment criteria by fitting a cumulative Gaussian function to the data within a sliding window of trials that are locked to a shift in feedback criterion. Unpredictable shifts in feedback criterion successfully induced shifts in actual decision criterion towards an optimal criterion for many of subjects, but with time delay and amount of shifts varying across individual subjects. There were disproportionately more numbers of overshooters (reaching and then surpassing the optimal criterion required than undershooters (subpar reach, with a significant anti-correlation with sensory sensitivity. To find a mechanism that generates these individual differences, we developed a dynamic criterion learning model by modifying a reinforcement learning model, which assumes that a criterion is adjusted every trial by a weighted discrepancy between actual and expected rewards.

Criterion for the onset of quench for low-flow reflood

International Nuclear Information System (INIS)

Hsu, Y.Y.; Young, M.W.

1982-07-01

This study provides a criterion for the onset of quench for low flow reflood. The criterion is a combination of two conditions: T/sub clad/ < T/sub limiting quench/ where T = Temperature, and α < 0.95 where α = void fraction. This criterion was obtained by examining temperature data from tests simulating PWR reflood, such as FLECHT, THTF, PBF, CCTF, and FEBA tests, with void fraction data from CCTF, FEBA, and FLECHT low flood tests. The data show that quenching initiated at α = 0.95 and that the majority of quench occurred at void fractions near 0.85. The results show that rods can be completely quenched by entrained droplets even if the collapsed liquid level does not advance. A thorough discussion of the analysis which supports this quench criterion is given in the text of this report

Self-Adjointness Criterion for Operators in Fock Spaces

International Nuclear Information System (INIS)

Falconi, Marco

2015-01-01

In this paper we provide a criterion of essential self-adjointness for operators in the tensor product of a separable Hilbert space and a Fock space. The class of operators we consider may contain a self-adjoint part, a part that preserves the number of Fock space particles and a non-diagonal part that is at most quadratic with respect to the creation and annihilation operators. The hypotheses of the criterion are satisfied in several interesting applications

Criterion-based laparoscopic training reduces total training time

OpenAIRE

Brinkman, Willem M.; Buzink, Sonja N.; Alevizos, Leonidas; de Hingh, Ignace H. J. T.; Jakimowicz, Jack J.

2011-01-01

Introduction The benefits of criterion-based laparoscopic training over time-oriented training are unclear. The purpose of this study is to compare these types of training based on training outcome and time efficiency. Methods During four training sessions within 1 week (one session per day) 34 medical interns (no laparoscopic experience) practiced on two basic tasks on the Simbionix LAP Mentor virtual-reality (VR) simulator: ‘clipping and grasping’ and ‘cutting’. Group C (criterion-based) (N...

The precautionary principle as a rational decision criterion

International Nuclear Information System (INIS)

Hovi, Jon

2001-12-01

The paper asks if the precautionary principle may be seen as a rational decision criterion. Six main questions are discussed. 1. Does the principle basically represent a particular set of political options or is it a genuine decision criterion? 2. If it is the latter, can it be reduced to any of the existing criteria for decision making under uncertainty? 3. In what kinds of situation is the principle applicable? 4. What is the relation between the precautionary principle and other principles for environmental regulation? 5. How plausible is the principle's claim that the burden of proof should be reversed? 6. Do the proponents of environmental regulation carry no burden of proof at all? A main conclusion is that, for now at least, the principle contains too many unclear elements to satisfy the requirements of precision and consistency that should reasonably be satisfied by a rational decision criterion. (author)

Probabilistic interpretation of the reduction criterion for entanglement

International Nuclear Information System (INIS)

Zhang, Zhengmin; Luo, Shunlong

2007-01-01

Inspired by the idea of conditional probabilities, we introduce a variant of conditional density operators. But unlike the conditional probabilities which are bounded by 1, the conditional density operators may have eigenvalues exceeding 1 for entangled states. This has the consequence that although any bivariate classical probability distribution has a natural separable decomposition in terms of conditional probabilities, we do not have a quantum analogue of this separable decomposition in general. The 'nonclassical' eigenvalues of conditional density operators are indications of entanglement. The resulting separability criterion turns out to be equivalent to the reduction criterion introduced by Horodecki [Phys. Rev. A 59, 4206 (1999)] and Cerf et al. [Phys. Rev. A 60, 898 (1999)]. This supplies an intuitive probabilistic interpretation for the reduction criterion. The conditional density operators are also used to define a form of quantum conditional entropy which provides an alternative mechanism to reveal quantum discord

Slope Safety Factor Calculations With Non-Linear Yield Criterion Using Finite Elements

DEFF Research Database (Denmark)

Clausen, Johan; Damkilde, Lars

2006-01-01

The factor of safety for a slope is calculated with the finite element method using a non-linear yield criterion of the Hoek-Brown type. The parameters of the Hoek-Brown criterion are found from triaxial test data. Parameters of the linear Mohr-Coulomb criterion are calibrated to the same triaxial...... are carried out at much higher stress levels than present in a slope failure, this leads to the conclusion that the use of the non-linear criterion leads to a safer slope design...

Psychometric properties of the Social Interaction Anxiety Scale and separation criterion between Spanish youths with and without subtypes of social anxiety.

Science.gov (United States)

Zubeidat, Ihab; Salinas, José María; Sierra, Juan Carlos; Fernández-Parra, Antonio

2007-01-01

In this study, we analyzed the reliability and validity of the Social Interaction Anxiety Scale (SIAS) and propose a separation criterion between youths with specific and generalized social anxiety and youths without social anxiety. A sample of 1012 Spanish youths attending school completed the SIAS, the Liebowitz Social Anxiety Scale, the Social Avoidance and Distress Scale, the Fear of Negative Evaluation Scale, the Youth Self-Report for Ages 11-18 and the Minnesota Multiphasic Personality Inventory-Adolescent. The factor analysis suggests the existence of three factors in the SIAS, the first two of which explain most of the variance of the construct assessed. Internal consistency is adequate in the first two factors. The SIAS features an adequate theoretical validity with the scores of different variables related to social interaction. Analysis of the criterion scores yields three groups pertaining to three clearly differentiated clusters. In the third cluster, two of social anxiety groups - specific and generalized - have been identified by means of a quantitative separation criterion.

Variability in proactive and reactive cognitive control processes across the adult lifespan

Directory of Open Access Journals (Sweden)

Frini eKarayanidis

2011-11-01

Full Text Available Task-switching paradigms produce a highly consistent age-related increase in mixing cost (longer RT on repeat trials in mixed-task than single task blocks but a less consistent age effect on switch cost (longer RT on switch than repeat trials in mixed-task blocks. We use two approaches to examine the adult lifespan trajectory of control processes contributing to mixing cost and switch cost: latent variables derived from an evidence accumulation model of choice, and event-related potentials (ERP that temporally differentiate proactive (cue-driven and reactive (target-driven control processes. Under highly practiced and prepared task conditions, ageing was associated with increasing RT mixing cost but reducing RT switch cost. Both effects were largely due to the same cause: an age effect for mixed-repeat trials. In terms of latent variables, increasing age was associated with slower non-decision processes, slower rate of evidence accumulation about the target, and higher response criterion. Age effects on mixing costs were evident only on response criterion, the amount of evidence required to trigger a decision, whereas age effects on switch cost were present for all three latent variables. ERPs showed age-related increases in preparation for mixed-repeat trials, anticipatory attention, and post-target interference. Cue-locked ERPs that are linked to proactive control were associated with early emergence of age differences in response criterion. These results are consistent with age effects on strategic processes controlling decision caution. Consistent with an age-related decline in cognitive flexibility, younger adults flexibly adjusted response criterion from trial-to-trial on mixed-task blocks, whereas older adults maintained a high criterion for all trials.

A Criterion to Identify Maximally Entangled Four-Qubit State

International Nuclear Information System (INIS)

Zha Xinwei; Song Haiyang; Feng Feng

2011-01-01

Paolo Facchi, et al. [Phys. Rev. A 77 (2008) 060304(R)] presented a maximally multipartite entangled state (MMES). Here, we give a criterion for the identification of maximally entangled four-qubit states. Using this criterion, we not only identify some existing maximally entangled four-qubit states in the literature, but also find several new maximally entangled four-qubit states as well. (general)

A Joint Optimization Criterion for Blind DS-CDMA Detection

Directory of Open Access Journals (Sweden)

Sergio A. Cruces-Alvarez

2007-01-01

Full Text Available This paper addresses the problem of the blind detection of a desired user in an asynchronous DS-CDMA communications system with multipath propagation channels. Starting from the inverse filter criterion introduced by Tugnait and Li in 2001, we propose to tackle the problem in the context of the blind signal extraction methods for ICA. In order to improve the performance of the detector, we present a criterion based on the joint optimization of several higher-order statistics of the outputs. An algorithm that optimizes the proposed criterion is described, and its improved performance and robustness with respect to the near-far problem are corroborated through simulations. Additionally, a simulation using measurements on a real software-radio platform at 5 GHz has also been performed.

A Joint Optimization Criterion for Blind DS-CDMA Detection

Science.gov (United States)

Durán-Díaz, Iván; Cruces-Alvarez, Sergio A.

2006-12-01

This paper addresses the problem of the blind detection of a desired user in an asynchronous DS-CDMA communications system with multipath propagation channels. Starting from the inverse filter criterion introduced by Tugnait and Li in 2001, we propose to tackle the problem in the context of the blind signal extraction methods for ICA. In order to improve the performance of the detector, we present a criterion based on the joint optimization of several higher-order statistics of the outputs. An algorithm that optimizes the proposed criterion is described, and its improved performance and robustness with respect to the near-far problem are corroborated through simulations. Additionally, a simulation using measurements on a real software-radio platform at 5 GHz has also been performed.

Three-Dimensional Dynamic Rupture in Brittle Solids and the Volumetric Strain Criterion

Science.gov (United States)

Uenishi, K.; Yamachi, H.

2017-12-01

As pointed out by Uenishi (2016 AGU Fall Meeting), source dynamics of ordinary earthquakes is often studied in the framework of 3D rupture in brittle solids but our knowledge of mechanics of actual 3D rupture is limited. Typically, criteria derived from 1D frictional observations of sliding materials or post-failure behavior of solids are applied in seismic simulations, and although mode-I cracks are frequently encountered in earthquake-induced ground failures, rupture in tension is in most cases ignored. Even when it is included in analyses, the classical maximum principal tensile stress rupture criterion is repeatedly used. Our recent basic experiments of dynamic rupture of spherical or cylindrical monolithic brittle solids by applying high-voltage electric discharge impulses or impact loads have indicated generation of surprisingly simple and often flat rupture surfaces in 3D specimens even without the initial existence of planes of weakness. However, at the same time, the snapshots taken by a high-speed digital video camera have shown rather complicated histories of rupture development in these 3D solid materials, which seem to be difficult to be explained by, for example, the maximum principal stress criterion. Instead, a (tensile) volumetric strain criterion where the volumetric strain (dilatation or the first invariant of the strain tensor) is a decisive parameter for rupture seems more effective in computationally reproducing the multi-directionally propagating waves and rupture. In this study, we try to show the connection between this volumetric strain criterion and other classical rupture criteria or physical parameters employed in continuum mechanics, and indicate that the criterion has, to some degree, physical meanings. First, we mathematically illustrate that the criterion is equivalent to a criterion based on the mean normal stress, a crucial parameter in plasticity. Then, we mention the relation between the volumetric strain criterion and the

An Elasto-Plastic Damage Model for Rocks Based on a New Nonlinear Strength Criterion

Science.gov (United States)

Huang, Jingqi; Zhao, Mi; Du, Xiuli; Dai, Feng; Ma, Chao; Liu, Jingbo

2018-05-01

The strength and deformation characteristics of rocks are the most important mechanical properties for rock engineering constructions. A new nonlinear strength criterion is developed for rocks by combining the Hoek-Brown (HB) criterion and the nonlinear unified strength criterion (NUSC). The proposed criterion takes account of the intermediate principal stress effect against HB criterion, as well as being nonlinear in the meridian plane against NUSC. Only three parameters are required to be determined by experiments, including the two HB parameters σ c and m i . The failure surface of the proposed criterion is continuous, smooth and convex. The proposed criterion fits the true triaxial test data well and performs better than the other three existing criteria. Then, by introducing the Geological Strength Index, the proposed criterion is extended to rock masses and predicts the test data well. Finally, based on the proposed criterion, a triaxial elasto-plastic damage model for intact rock is developed. The plastic part is based on the effective stress, whose yield function is developed by the proposed criterion. For the damage part, the evolution function is assumed to have an exponential form. The performance of the constitutive model shows good agreement with the results of experimental tests.

Sampling Criterion for EMC Near Field Measurements

DEFF Research Database (Denmark)

Franek, Ondrej; Sørensen, Morten; Ebert, Hans

2012-01-01

An alternative, quasi-empirical sampling criterion for EMC near field measurements intended for close coupling investigations is proposed. The criterion is based on maximum error caused by sub-optimal sampling of near fields in the vicinity of an elementary dipole, which is suggested as a worst......-case representative of a signal trace on a typical printed circuit board. It has been found that the sampling density derived in this way is in fact very similar to that given by the antenna near field sampling theorem, if an error less than 1 dB is required. The principal advantage of the proposed formulation is its...

A new objective criterion for IRIS localization

International Nuclear Information System (INIS)

Basit, A.

2010-01-01

Iris localization is the most important step in iris recognition systems. For commonly used databases, exact data is not given which describe the true results of localization. To cope with this problem a new objective criterion for iris localization is proposed in this paper based on our visual system. A specific number of points are selected on pupil boundary, iris boundary, upper eyelid and lower eyelid using the original image and then distance from these points to the result of complete iris localization has been calculated. If the determined distance is below a certain threshold then iris localization is considered correct. Experimental results show that proposed criterion is very effective. (author)

[The early expressive vocabulary size in simultaneous bilingual growing-up infants - a diagnostic relevant criterion?].

Science.gov (United States)

Kiese-Himmel, C; Sellner, L; Bockmann, A-K

2013-08-01

Bilingual young children's early expressive vocabulary size and its composition (as one domain of the language development) should be examined to find out whether children with a risk for delayed language development may be identified in this way. 30 bilingual kindergarten infants from Berlin (with simultaneous language acquisition; second language German) and 30 monolingual German infants from the greater areas of Stuttgart and Heidelberg were pair matched (mean chronological age 22.5 [SD 3.1] months; min 16; max 26). The German expressive vocabulary checklist Elternfragebogen zur Wort-schatzentwicklung im frühen Kindesalter (ELAN; Bockmann & Kiese-Himmel, 2006) was filled out by all parents. In addition, parents of bilingual infants completed the adaption of the German vocabulary checklist Sprachbeurteilung durch Eltern (SBE-2-KT; v. Suchodoletz & Sachse, 2008) for the second mother tongue. The monolinguals' word sum in the ELAN (145.7; SD 75.8) differed significantly (p=0.001) from the bilinguals' word sum (78.3; SD 78.9 words). In contrast, bilinguals did not significantly differ in their overall expressive vocabulary size (ELAN+SBE-2-KT: 101.2; SD 77.0 words) from their monolingual counterparts (ELAN). Because bilinguals had a similar sized overall early vocabulary (both languages) like monolingual German-learning infants, the diagnostic criterion to identify late talkers with 24 months of age (less than 50 German words and no word combinations) should not be applied to bilingually infants with simultaneously double language acquisition. © Georg Thieme Verlag KG Stuttgart · New York.

Retrieving relevant factors with exploratory SEM and principal-covariate regression: A comparison.

Science.gov (United States)

Vervloet, Marlies; Van den Noortgate, Wim; Ceulemans, Eva

2018-02-12

Behavioral researchers often linearly regress a criterion on multiple predictors, aiming to gain insight into the relations between the criterion and predictors. Obtaining this insight from the ordinary least squares (OLS) regression solution may be troublesome, because OLS regression weights show only the effect of a predictor on top of the effects of other predictors. Moreover, when the number of predictors grows larger, it becomes likely that the predictors will be highly collinear, which makes the regression weights' estimates unstable (i.e., the "bouncing beta" problem). Among other procedures, dimension-reduction-based methods have been proposed for dealing with these problems. These methods yield insight into the data by reducing the predictors to a smaller number of summarizing variables and regressing the criterion on these summarizing variables. Two promising methods are principal-covariate regression (PCovR) and exploratory structural equation modeling (ESEM). Both simultaneously optimize reduction and prediction, but they are based on different frameworks. The resulting solutions have not yet been compared; it is thus unclear what the strengths and weaknesses are of both methods. In this article, we focus on the extents to which PCovR and ESEM are able to extract the factors that truly underlie the predictor scores and can predict a single criterion. The results of two simulation studies showed that for a typical behavioral dataset, ESEM (using the BIC for model selection) in this regard is successful more often than PCovR. Yet, in 93% of the datasets PCovR performed equally well, and in the case of 48 predictors, 100 observations, and large differences in the strengths of the factors, PCovR even outperformed ESEM.

Predicting sun protection behaviors using protection motivation variables.

Science.gov (United States)

Ch'ng, Joanne W M; Glendon, A Ian

2014-04-01

Protection motivation theory components were used to predict sun protection behaviors (SPBs) using four outcome measures: typical reported behaviors, previous reported behaviors, current sunscreen use as determined by interview, and current observed behaviors (clothing worn) to control for common method bias. Sampled from two SE Queensland public beaches during summer, 199 participants aged 18-29 years completed a questionnaire measuring perceived severity, perceived vulnerability, response efficacy, response costs, and protection motivation (PM). Personal perceived risk (similar to threat appraisal) and response likelihood (similar to coping appraisal) were derived from their respective PM components. Protection motivation predicted all four SPB criterion variables. Personal perceived risk and response likelihood predicted protection motivation. Protection motivation completely mediated the effect of response likelihood on all four criterion variables. Alternative models are considered. Strengths and limitations of the study are outlined and suggestions made for future research.

Extending Structural Analyses of the Rosenberg Self-Esteem Scale to Consider Criterion-Related Validity: Can Composite Self-Esteem Scores Be Good Enough?

Science.gov (United States)

Donnellan, M Brent; Ackerman, Robert A; Brecheen, Courtney

2016-01-01

Although the Rosenberg Self-Esteem Scale (RSES) is the most widely used measure of global self-esteem in the literature, there are ongoing disagreements about its factor structure. This methodological debate informs how the measure should be used in substantive research. Using a sample of 1,127 college students, we test the overall fit of previously specified models for the RSES, including a newly proposed bifactor solution (McKay, Boduszek, & Harvey, 2014 ). We extend previous work by evaluating how various latent factors from these structural models are related to a set of criterion variables frequently studied in the self-esteem literature. A strict unidimensional model poorly fit the data, whereas models that accounted for correlations between negatively and positively keyed items tended to fit better. However, global factors from viable structural models had similar levels of association with criterion variables and with the pattern of results obtained with a composite global self-esteem variable calculated from observed scores. Thus, we did not find compelling evidence that different structural models had substantive implications, thereby reducing (but not eliminating) concerns about the integrity of the self-esteem literature based on overall composite scores for the RSES.

Development of failure criterion for Kevlar-epoxy fabric laminates

Science.gov (United States)

Tennyson, R. C.; Elliott, W. G.

1984-01-01

The development of the tensor polynomial failure criterion for composite laminate analysis is discussed. In particular, emphasis is given to the fabrication and testing of Kevlar-49 fabric (Style 285)/Narmco 5208 Epoxy. The quadratic-failure criterion with F(12)=0 provides accurate estimates of failure stresses for the Kevlar/Epoxy investigated. The cubic failure criterion was re-cast into an operationally easier form, providing the engineer with design curves that can be applied to laminates fabricated from unidirectional prepregs. In the form presented no interaction strength tests are required, although recourse to the quadratic model and the principal strength parameters is necessary. However, insufficient test data exists at present to generalize this approach for all undirectional prepregs and its use must be restricted to the generic materials investigated to-date.

Assessing stress-related treatment needs among girls at risk for poor functional outcomes: The impact of cumulative adversity, criterion traumas, and non-criterion events.

Science.gov (United States)

Lansing, Amy E; Plante, Wendy Y; Beck, Audrey N

2017-05-01

Despite growing recognition that cumulative adversity (total stressor exposure, including complex trauma), increases the risk for psychopathology and impacts development, assessment strategies lag behind: Adversity-related mental health needs (symptoms, functional impairment, maladaptive coping) are typically assessed in response to only one qualifying Criterion-A traumatic event. This is especially problematic for youth at-risk for health and academic disparities who experience cumulative adversity, including non-qualifying events (separation from caregivers) which may produce more impairing symptomatology. Data from 118 delinquent girls demonstrate: (1) an average of 14 adverse Criterion-A and non-Criterion event exposures; (2) serious maladaptive coping strategies (self-injury) directly in response to cumulative adversity; (3) more cumulative adversity-related than worst-event related symptomatology and functional impairment; and (4) comparable symptomatology, but greater functional impairment, in response to non-Criterion events. These data support the evaluation of mental health needs in response to cumulative adversity for optimal identification and tailoring of services in high-risk populations to reduce disparities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Criterion for the engineering performance of carbon materials under neutron irradiation

International Nuclear Information System (INIS)

Virgil'ev, Yu.S.

2002-01-01

The criterion for the engineering performance and substation of its applicability to the reactor graphite are proposed. The complex indicator, representing the ratio of strength limits by compression and bending is proposed as the above criterion, characterizing the graphite quality. The growth of this criterion indicates the accumulation of large heterogeneities microcracks of technological or radiation character. The decrease in this indicator testifies to the growth of small heterogeneities, and consequently to the increase in the graphite engineering performance [ru

Mercier criterion for high-β tokamaks

International Nuclear Information System (INIS)

Galvao, R.M.O.

1984-01-01

An expression, for the application of the Mercier criterion to numerical studies of diffuse high-β tokamaks (β approximatelly Σ,q approximatelly 1), which contains only leading order contributions in the high-β tokamak approximation is derived. (L.C.) [pt

Criterion-related validity of the foot health status questionnaire regarding strength and plantar pressure measurements in elderly people.

Science.gov (United States)

Cuesta-Vargas, Antonio I; Galan-Mercant, Alejandro; Martín-Borras, Maria Carmen; González-Sánchez, Manuel

2012-12-01

Criterion-related validity of a self-administered questionnaire listed as gold standard requires objective testing. The aim of this study was to analyze the Foot Health Status Questionnaire (FHSQ) using functional variable measures (dynamic plantar pressure and foot strength). A total of 22 elderly healthy participants (13 women and 9 men) were screened by interview and physical examination for foot or gait abnormalities. Foot strength, footprint pressure, and foot health status were measured. All the items of the FHSQ show significant correlation with functional variables, but general foot health shows the highest correlation with the 4 physical variables related to plantar pressure (R2 = 0.741), followed by foot pain (R2 = 0.652). A set of different, directly measured physical variables related to foot strength and plantar pressure significantly correlate with the FHSQ dimensions. Cross-sectional trial.

Study on the quantitative rod internal pressure design criterion

International Nuclear Information System (INIS)

Kim, Kyu Tae; Kim, Oh Hwan; Han, Hee Tak

1991-01-01

The current rod internal pressure criterion permits fuel rods to operate with internal pressures in excess of system pressure only if internal overpressure does not cause the diametral gap enlargement. In this study, the generic allowable internal gas pressure not violating this criterion is estimated as a function of rod power. The results show that the generic allowable internal gas pressure decreases linearly with the increase of rod power. Application of the generic allowable internal gas pressure for the rod internal pressure design criterion will result in the simplication of the current design procedure for checking the diametral gap enlargement caused by internal overpressure because according to the current design procedure the cladding creepout rate should be compared with the fuel swelling rate at each axial node at each time step whenever internal pressure exceeds the system pressure. (Author)

Generalized Majority Logic Criterion to Analyze the Statistical Strength of S-Boxes

Science.gov (United States)

Hussain, Iqtadar; Shah, Tariq; Gondal, Muhammad Asif; Mahmood, Hasan

2012-05-01

The majority logic criterion is applicable in the evaluation process of substitution boxes used in the advanced encryption standard (AES). The performance of modified or advanced substitution boxes is predicted by processing the results of statistical analysis by the majority logic criteria. In this paper, we use the majority logic criteria to analyze some popular and prevailing substitution boxes used in encryption processes. In particular, the majority logic criterion is applied to AES, affine power affine (APA), Gray, Lui J, residue prime, S8 AES, Skipjack, and Xyi substitution boxes. The majority logic criterion is further extended into a generalized majority logic criterion which has a broader spectrum of analyzing the effectiveness of substitution boxes in image encryption applications. The integral components of the statistical analyses used for the generalized majority logic criterion are derived from results of entropy analysis, contrast analysis, correlation analysis, homogeneity analysis, energy analysis, and mean of absolute deviation (MAD) analysis.

Conflicting views on a neutrality criterion for radioactive-waste management

International Nuclear Information System (INIS)

Cochran, T.B.; Bodde, D.L.

1983-01-01

Two essays are presented by authors who agree that risks imposed on future generations through the management of radioactive waste are acceptable if they meet a criterion of neutrality, but who disagree on the interpretation of the neutrality criterion. The first viewpoint argues that acceptable isolation of high-level radioactive waste is yet to be accomplished and that a fundamental criterion for radioactive waste disposal must include consideration of the intergenerational radiation effects. The second essay promotes balanced resource allocation, technological progress, and adequate problem-solving institutions as the solution to the problem. The debate illustrates the complexities involved in applying philosophical principles to public policy, even when the principles have been agreed upon. 23 references, 1 figure

Elitism, Sharing and Ranking Choices in Evolutionary Multi-Criterion Optimisation

OpenAIRE

Pursehouse, R.C.; Fleming, P.J.

2002-01-01

Elitism and sharing are two mechanisms that are believed to improve the performance of an evolutionary multi-criterion optimiser. The relative performance of of the two most popular ranking strategies is largely unknown. Using a new empirical inquiry framework, this report studies the effect of elitism, sharing and ranking design choices using a benchmark suite of two-criterion problems.........

Validation of a Criterion for Cam Mechanisms Optimization Using Constraints upon Cam’s Curvature

Directory of Open Access Journals (Sweden)

Stelian Alaci

2016-06-01

Full Text Available For the mechanism with rotating cam and knife-edge follower, an optimization criterion by means of imposed constraints upon cam’s curvature is expressed in a special coordinate system. Thus, stating the optimization criterion in the coordinate system defined by the mechanisms constructive parameters -eccentricity and minimum follower’s stroke, a contour is obtained for any position of the mechanism. The optimization criterion assumes establishing the position of the characteristic point of the mechanism with respect to this contour. Fulfillment of optimization criterion assumes that the characteristic point is positioned in the same manner with respect to all contours. The optimization criterion is simplified when considering the envelope of the contours. The method is exemplified using two mechanisms, with the cams priori satisfying the criterion.

Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

OpenAIRE

Chang-Gi Min; Mun-Kyeom Kim

2017-01-01

This study proposes an evaluation method for variable generation (VG) acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE) is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion). VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was ap...

Criterion and Divergent Validity of the Sexual Minority Adolescent Stress Inventory

Directory of Open Access Journals (Sweden)

Jeremy T. Goldbach

2017-11-01

Full Text Available Sexual minority adolescents (SMA consistently report health disparities compared to their heterosexual counterparts, yet the underlying mechanisms of these negative health outcomes remain unclear. The predominant explanatory model is the minority stress theory; however, this model was developed largely with adults, and no valid and comprehensive measure of minority stress has been developed for adolescents. The present study validated a newly developed instrument to measure minority stress among racially and ethnically diverse SMA. A sample of 346 SMA aged 14–17 was recruited and surveyed between February 2015 and July 2016. The focal measure of interest was the 64-item, 11-factor Sexual Minority Adolescent Stress Inventory (SMASI developed in the initial phase of this study. Criterion validation measures included measures of depressive symptoms, suicidality and self-harm, youth problem behaviors, and substance use; the general Adolescent Stress Questionnaire (ASQ was included as a measure of divergent validity. Analyses included Pearson and tetrachoric correlations to establish criterion and divergent validity and structural equation modeling to assess the explanatory utility of the SMASI relative to the ASQ. SMASI scores were significantly associated with all outcomes but only moderately associated with the ASQ (r = −0.13 to 0.51. Analyses revealed significant associations of a latent minority stress variable with both proximal and distal health outcomes beyond the variation explained by general stress. Results show that the SMASI is the first instrument to validly measure minority stress among SMA.

Shrinkage Porosity Criterion and Its Application to A 5.5 Ton Steel Ingot

Directory of Open Access Journals (Sweden)

Zhang C.

2016-06-01

Full Text Available In order to predict the distribution of shrinkage porosity in steel ingot efficiently and accurately, a criterion R√L and a method to obtain its threshold value were proposed. The criterion R√L was derived based on the solidification characteristics of steel ingot and pressure gradient in the mushy zone, in which the physical properties, the thermal parameters, the structure of the mushy zone and the secondary dendrite arm spacing were all taken into consideration. The threshold value of the criterion R√L was obtained with combination of numerical simulation of ingot solidification and total solidification shrinkage rate. Prediction of the shrinkage porosity in a 5.5 ton ingot of 2Cr13 steel with criterion R√L>0.21 m · °C1/2 · s−3/2 agreed well with the results of experimental sectioning. Based on this criterion, optimization of the ingot was carried out by decreasing the height-to-diameter ratio and increasing the taper, which successfully eliminated the centreline porosity and further proved the applicability of this criterion.

Judging Criterion of Controlled Structures with Closely Spaced Natural Frequencies

International Nuclear Information System (INIS)

Xie Faxiang; Sun Limin

2010-01-01

The structures with closely spaced natural frequencies widely exist in civil engineering; however, the judging criterion of the density of closely spaced frequencies is in dispute. This paper suggests a judging criterion for structures with closely spaced natural frequencies based on the analysis on a controlled 2-DOF structure. The analysis results indicate that the optimal control gain of the structure with velocity feedback is dependent on the frequency density parameter of structure and the maximum attainable additional modal damping ratio is 1.72 times of the frequency density parameter when state feedback is applied. Based on a brief review on the previous researches, a judging criterion related the minimum frequency density parameter and the required mode damping ratio was proposed.

A New Criterion for Prediction of Hot Tearing Susceptibility of Cast Alloys

Science.gov (United States)

Nasresfahani, Mohamad Reza; Niroumand, Behzad

2014-08-01

A new criterion for prediction of hot tearing susceptibility of cast alloys is suggested which takes into account the effects of both important mechanical and metallurgical factors and is believed to be less sensitive to the presence of volume defects such as bifilms and inclusions. The criterion was validated by studying the hot tearing tendency of Al-Cu alloy. In conformity with the experimental results, the new criterion predicted reduction of hot tearing tendency with increasing the copper content.

Experimentally Manipulating Items Informs on the (Limited Construct and Criterion Validity of the Humor Styles Questionnaire

Directory of Open Access Journals (Sweden)

Willibald Ruch

2017-04-01

Full Text Available How strongly does humor (i.e., the construct-relevant content in the Humor Styles Questionnaire (HSQ; Martin et al., 2003 determine the responses to this measure (i.e., construct validity? Also, how much does humor influence the relationships of the four HSQ scales, namely affiliative, self-enhancing, aggressive, and self-defeating, with personality traits and subjective well-being (i.e., criterion validity? The present paper answers these two questions by experimentally manipulating the 32 items of the HSQ to only (or mostly contain humor (i.e., construct-relevant content or to substitute the humor content with non-humorous alternatives (i.e., only assessing construct-irrelevant context. Study 1 (N = 187 showed that the HSQ affiliative scale was mainly determined by humor, self-enhancing and aggressive were determined by both humor and non-humorous context, and self-defeating was primarily determined by the context. This suggests that humor is not the primary source of the variance in three of the HQS scales, thereby limiting their construct validity. Study 2 (N = 261 showed that the relationships of the HSQ scales to the Big Five personality traits and subjective well-being (positive affect, negative affect, and life satisfaction were consistently reduced (personality or vanished (subjective well-being when the non-humorous contexts in the HSQ items were controlled for. For the HSQ self-defeating scale, the pattern of relationships to personality was also altered, supporting an positive rather than a negative view of the humor in this humor style. The present findings thus call for a reevaluation of the role that humor plays in the HSQ (construct validity and in the relationships to personality and well-being (criterion validity.

Experimentally Manipulating Items Informs on the (Limited) Construct and Criterion Validity of the Humor Styles Questionnaire.

Science.gov (United States)

Ruch, Willibald; Heintz, Sonja

2017-01-01

How strongly does humor (i.e., the construct-relevant content) in the Humor Styles Questionnaire (HSQ; Martin et al., 2003) determine the responses to this measure (i.e., construct validity)? Also, how much does humor influence the relationships of the four HSQ scales, namely affiliative, self-enhancing, aggressive, and self-defeating, with personality traits and subjective well-being (i.e., criterion validity)? The present paper answers these two questions by experimentally manipulating the 32 items of the HSQ to only (or mostly) contain humor (i.e., construct-relevant content) or to substitute the humor content with non-humorous alternatives (i.e., only assessing construct-irrelevant context). Study 1 ( N = 187) showed that the HSQ affiliative scale was mainly determined by humor, self-enhancing and aggressive were determined by both humor and non-humorous context, and self-defeating was primarily determined by the context. This suggests that humor is not the primary source of the variance in three of the HQS scales, thereby limiting their construct validity. Study 2 ( N = 261) showed that the relationships of the HSQ scales to the Big Five personality traits and subjective well-being (positive affect, negative affect, and life satisfaction) were consistently reduced (personality) or vanished (subjective well-being) when the non-humorous contexts in the HSQ items were controlled for. For the HSQ self-defeating scale, the pattern of relationships to personality was also altered, supporting an positive rather than a negative view of the humor in this humor style. The present findings thus call for a reevaluation of the role that humor plays in the HSQ (construct validity) and in the relationships to personality and well-being (criterion validity).

General Criterion for Harmonicity

Science.gov (United States)

Proesmans, Karel; Vandebroek, Hans; Van den Broeck, Christian

2017-10-01

Inspired by Kubo-Anderson Markov processes, we introduce a new class of transfer matrices whose largest eigenvalue is determined by a simple explicit algebraic equation. Applications include the free energy calculation for various equilibrium systems and a general criterion for perfect harmonicity, i.e., a free energy that is exactly quadratic in the external field. As an illustration, we construct a "perfect spring," namely, a polymer with non-Gaussian, exponentially distributed subunits which, nevertheless, remains harmonic until it is fully stretched. This surprising discovery is confirmed by Monte Carlo and Langevin simulations.

Stochastic Learning and the Intuitive Criterion in Simple Signaling Games

DEFF Research Database (Denmark)

Sloth, Birgitte; Whitta-Jacobsen, Hans Jørgen

A stochastic learning process for signaling games with two types, two signals, and two responses gives rise to equilibrium selection which is in remarkable accordance with the selection obtained by the intuitive criterion......A stochastic learning process for signaling games with two types, two signals, and two responses gives rise to equilibrium selection which is in remarkable accordance with the selection obtained by the intuitive criterion...

Selecting Items for Criterion-Referenced Tests.

Science.gov (United States)

Mellenbergh, Gideon J.; van der Linden, Wim J.

1982-01-01

Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

Multiaxial fatigue criterion based on parameters from torsion and axial S-N curve

Directory of Open Access Journals (Sweden)

M. Margetin

2016-07-01

Full Text Available Multiaxial high cycle fatigue is a topic that concerns nearly all industrial domains. In recent years, a great deal of recommendations how to address problems with multiaxial fatigue life time estimation have been made and a huge progress in the field has been achieved. Until now, however, no universal criterion for multiaxial fatigue has been proposed. Addressing this situation, this paper offers a design of a new multiaxial criterion for high cycle fatigue. This criterion is based on critical plane search. Damage parameter consists of a combination of normal and shear stresses on a critical plane (which is a plane with maximal shear stress amplitude. Material parameters used in proposed criterion are obtained from torsion and axial S-N curves. Proposed criterion correctly calculates life time for boundary loading condition (pure torsion and pure axial loading. Application of proposed model is demonstrated on biaxial loading and the results are verified with testing program using specimens made from S355 steel. Fatigue material parameters for proposed criterion and multiple sets of data for different combination of axial and torsional loading have been obtained during the experiment.

Creativity-Relevant Personal Characteristics among Indonesia Creative Workers

Directory of Open Access Journals (Sweden)

Nugroho J. Setiadi

2014-09-01

Full Text Available The study aims to identify Creativity-relevant Personal Characteristics among creative workers in Indonesia’s creative industry. Identification of the constituent elements of the nature of the changes needs to be measured. Researchers have advocated replacing creativity-relevant personal characteristics based on the five-factor model to investigate how individual differences stimulate creativity. This study presents data supporting reliability (internal consistency and validity (criterion and construct of the instrument. Validity of the instrument is based on the content validity involving art and design experts. The 220 creative workers from several creative industry firms in Indonesia participated as samples in this research. Results of a factor analysis indicated a five factor solution of creative characteristics and behavior. Discussion of findings and the most important ways in which individuals differ in their enduring emotional, interpersonal, experiential, attitudinal, and motivational styles for stimulating creativity are presented.

The role of word choice and criterion on intentional memory.

Science.gov (United States)

Toyota, Hiroshi

2015-02-01

The relationship between the criterion for choosing and the self-choice effects (greater recall in a self-choice compared to a forced-choice condition) on intentional memory was examined. Thirty-three female nursing school volunteers were administered 24 word pairs in a 2 × 2 design to assess the influence of motivation upon free recall. When word pairs were presented to participants, they were asked to choose a word to-be-remembered, either in a self-choice condition or a forced-choice condition. Words chosen by the participants were recalled more often than those chosen by the experimenter (forced choice). Thus, the self-choice effect was greater for words chosen with a self-reference criterion compared to a metamemory criterion, supporting the integration hypothesis as the origin of the self-choice effect.

Generalized anxiety disorder and the proposed associated symptoms criterion change for DSM-5 in a treatment-seeking sample of anxious youth.

Science.gov (United States)

Comer, Jonathan S; Pincus, Donna B; Hofmann, Stefan G

2012-12-01

A current proposal for the DSM-5 general anxiety disorder (GAD) definition is to remove fatigue, difficulty concentrating, irritability, and sleep disturbance from the list of associated symptoms, and to require the presence of one of two retained symptoms (restlessness or muscle tension) for diagnosis. Relevant evaluations in youth to support such a change are sparse. The present study evaluated patterns and correlates of the DSM-IV GAD associated symptoms in a large outpatient sample of anxious youth (N = 650) to empirically consider how the proposed diagnostic change might impact the prevalence and sample composition of GAD in children. Logistic regression found irritability to be the most associated, and restlessness to be the least associated, with GAD diagnosis. Fatigue, difficulty concentrating, and sleep disturbances-which have each been suggested to be nonspecific to GAD due to their prevalence in depression-showed sizable associations with GAD even after accounting for depression and attention problems. Among GAD youth, 10.9% would not meet the proposed DSM-5 associated symptoms criterion. These children were comparable to GAD youth who would meet the proposed criteria with regard to clinical severity, symptomatology, and functioning. A substantial proportion of youth with excessive, clinically impairing worry may be left unclassified by the DSM-5 if the proposed GAD associated symptoms criterion is adopted. Despite support for the proposed criterion change in adult samples, the present findings suggest that in children it may increase the false negative rate. This calls into question whether the proposed associated symptoms criterion is optimal for defining childhood GAD. © 2012 Wiley Periodicals, Inc.

A NEW CLINICAL PREDICTION CRITERION ACCURATELY DETERMINES A SUBSET OF PATIENTS WITH BILATERAL PRIMARY ALDOSTERONISM BEFORE ADRENAL VENOUS SAMPLING.

Science.gov (United States)

Kocjan, Tomaz; Janez, Andrej; Stankovic, Milenko; Vidmar, Gaj; Jensterle, Mojca

2016-05-01

Adrenal venous sampling (AVS) is the only available method to distinguish bilateral from unilateral primary aldosteronism (PA). AVS has several drawbacks, so it is reasonable to avoid this procedure when the results would not affect clinical management. Our objective was to identify a clinical criterion that can reliably predict nonlateralized AVS as a surrogate for bilateral PA that is not treated surgically. A retrospective diagnostic cross-sectional study conducted at Slovenian national endocrine referral center included 69 consecutive patients (mean age 56 ± 8 years, 21 females) with PA who underwent AVS. PA was confirmed with the saline infusion test (SIT). AVS was performed sequentially during continuous adrenocorticotrophic hormone (ACTH) infusion. The main outcome measures were variables associated with nonlateralized AVS to derive a clinical prediction rule. Sixty-seven (97%) patients had a successful AVS and were included in the statistical analysis. A total of 39 (58%) patients had nonlateralized AVS. The combined criterion of serum potassium ≥3.5 mmol/L, post-SIT aldosterone AVS. The best overall classification accuracy (50/67 = 75%) was achieved using the post-SIT aldosterone level AVS. Our clinical prediction criterion appears to accurately determine a subset of patients with bilateral PA who could avoid unnecessary AVS and immediately commence with medical treatment.

Development of Predictor and Criterion Measures for the NCO21 Research Program

National Research Council Canada - National Science Library

Knapp, Deidre

2002-01-01

... incorporated into an NCO performance management system geared to 21st century job demands. This report documents the design and development of predictor and criterion measures that will be used in a criterion-related validation data collection...

A Controlled Evaluation of the Distress Criterion for Binge Eating Disorder

Science.gov (United States)

Grilo, Carlos M.; White, Marney A.

2011-01-01

Objective: Research has examined various aspects of the validity of the research criteria for binge eating disorder (BED) but has yet to evaluate the utility of Criterion C, "marked distress about binge eating." This study examined the significance of the marked distress criterion for BED using 2 complementary comparison groups. Method:…

Effects of Mastery Criterion on the Emergence of Derived Equivalence Relations

Science.gov (United States)

Fienup, Daniel M.; Brodsky, Julia

2017-01-01

In this study, we manipulated mastery criterion form (rolling or block) and stringency (across 6 or 12 trials) and measured the emergence of derived relations. College students learned neuroanatomy equivalence classes and experienced one of two rolling mastery criteria (6 or 12 consecutive correct responses) or a block mastery criterion (12 trials…

Policy relevance of various proposals for greening GDP

International Nuclear Information System (INIS)

De Wit, G.

1996-02-01

From the study on the title subject it appears that the use of a number of separate physical indicators is valuable for policy making but that it would be helpful for policy to develop (alongside the conventional Gross Domestic Product (GDP) and these environmental indicators) an extra 'green' GDP. The analysis of the various surveyed proposals of greening GDP results into the conclusion that adjustments should be made as follows: (1) adjustment for the net depletion of natural resources according to the net price method, (2) adjustment for the degradation of nature by polluting emissions with the aid of shadow prices derived from politics, and (3) adjustment for certain categories of environmental defensive expenditures. The major reasons for this recommendation are: (1) such a GDP can facilitate government in decisions where trade-offs between production and a clean environment are at stake, (2) the recommended way of valuation minimizes the inherent subjectiveness of valuing nature, (3) the way of valuation of nature is not likely to lead to an overestimation, and (4) at least for the Netherlands the proposal is operational in the near future. In Chapter 2 a set of evaluation criteria is designed. One evaluation criterion is the potential policy relevance of a proposed indicator, i.e. its relevance when the indicator measures exactly what it is intended to measure. In Chapter 3 the potential policy relevance of an adjusted GDP is elaborated. Another evaluation criterion is the scientific validity of a proposed indicator: is the indicator really measuring what it is intended to measure? To judge whether this is the case for the various proposals for adjusting GDP, a theoretical framework that facilitates such a judgement is discussed in Chapter 4. In Chapters 5, 6 and 7 actual evaluation of the various proposals for environmental indicators is carried out. In Chapter 5 proposals regarding the depletion of natural resources are evaluated. (Abstract Truncated)

Fluency: an aim in teaching and a criterion in assessment

Directory of Open Access Journals (Sweden)

Aud Marit Simensen

2010-05-01

Full Text Available This article investigates the concept ‘fluency’ from different perspectives. When fluency is an aim in teaching, a thorough comprehension of the concept among teachers is a prerequisite for appropriate planning of instruction, including the choice of appropriate classroom activities. When fluency is an assessment criterion, it is even more important that examiners have a shared perception of the concept. The present article starts by presenting common perceptions of the concept and goes on to explore some of the current research. Next, it provides a historical overview of the place of fluency in teaching theory and explains some of the preconditions for the inclusion of this concept among teaching objectives and assessment criteria. It will also, as an illustration, give an outline of the position of the concept over time in the Norwegian school system on the basis of an analysis of the relevant syllabuses. Finally, the article explicates the notion of language use as a complex cognitive skill and explores current method¬ological ideas about teaching towards fluency.

Slope stability analysis using limit equilibrium method in nonlinear criterion.

Science.gov (United States)

Lin, Hang; Zhong, Wenwen; Xiong, Wei; Tang, Wenyu

2014-01-01

In slope stability analysis, the limit equilibrium method is usually used to calculate the safety factor of slope based on Mohr-Coulomb criterion. However, Mohr-Coulomb criterion is restricted to the description of rock mass. To overcome its shortcomings, this paper combined Hoek-Brown criterion and limit equilibrium method and proposed an equation for calculating the safety factor of slope with limit equilibrium method in Hoek-Brown criterion through equivalent cohesive strength and the friction angle. Moreover, this paper investigates the impact of Hoek-Brown parameters on the safety factor of slope, which reveals that there is linear relation between equivalent cohesive strength and weakening factor D. However, there are nonlinear relations between equivalent cohesive strength and Geological Strength Index (GSI), the uniaxial compressive strength of intact rock σ ci , and the parameter of intact rock m i . There is nonlinear relation between the friction angle and all Hoek-Brown parameters. With the increase of D, the safety factor of slope F decreases linearly; with the increase of GSI, F increases nonlinearly; when σ ci is relatively small, the relation between F and σ ci is nonlinear, but when σ ci is relatively large, the relation is linear; with the increase of m i , F decreases first and then increases.

Finite Difference Solution of Elastic-Plastic Thin Rotating Annular Disk with Exponentially Variable Thickness and Exponentially Variable Density

Directory of Open Access Journals (Sweden)

Sanjeev Sharma

2013-01-01

Full Text Available Elastic-plastic stresses, strains, and displacements have been obtained for a thin rotating annular disk with exponentially variable thickness and exponentially variable density with nonlinear strain hardening material by finite difference method using Von-Mises' yield criterion. Results have been computed numerically and depicted graphically. From the numerical results, it can be concluded that disk whose thickness decreases radially and density increases radially is on the safer side of design as compared to the disk with exponentially varying thickness and exponentially varying density as well as to flat disk.

The Leadership Criterion in Technological Institute

International Nuclear Information System (INIS)

Carvalho, Marcelo Souza de; Cussa, Adriana Lourenco d'Avila; Suita, Julio Cezar

2005-01-01

This paper introduces the Direction's 'Decision Making Practice'. It has recently been reviewed with the merging of the beddings of the Leadership Criterion (CE-PNQ). These changes improved the control of institutional plans of action which are the result of the global performance critical analysis and other information associated with the Decision Making Practice. (author)

Spatial frequency discrimination: visual long-term memory or criterion setting?

Science.gov (United States)

Lages, M; Treisman, M

1998-02-01

A long-term sensory memory is believed to account for spatial frequency discrimination when reference and test stimuli are separated by long intervals. We test an alternative proposal: that discrimination is determined by the range of test stimuli, through their entrainment of criterion-setting processes. Experiments 1 and 2 show that the 50% point of the psychometric function is largely determined by the midpoint of the stimulus range, not by the reference stimulus. Experiment 3 shows that discrimination of spatial frequencies is similarly affected by orthogonal contextual stimuli and parallel contextual stimuli and that these effects can be explained by criterion-setting processes. These findings support the hypothesis that discrimination over long intervals is explained by the operation of criterion-setting processes rather than by long-term sensory retention of a neural representation of the stimulus.

LSSVM-Based Rock Failure Criterion and Its Application in Numerical Simulation

Directory of Open Access Journals (Sweden)

Changxing Zhu

2015-01-01

Full Text Available A rock failure criterion is very important for the prediction of the failure of rocks or rock masses in rock mechanics and engineering. Least squares support vector machines (LSSVM are a powerful tool for addressing complex nonlinear problems. This paper describes a LSSVM-based rock failure criterion for analyzing the deformation of a circular tunnel under different in situ stresses without assuming a function form. First, LSSVM was used to represent the nonlinear relationship between the mechanical properties of rock and the failure behavior of the rock in order to construct a rock failure criterion based on experimental data. Then, this was used in a hypothetical numerical analysis of a circular tunnel to analyze the mechanical behavior of the rock mass surrounding the tunnel. The Mohr-Coulomb and Hoek-Brown failure criteria were also used to analyze the same case, and the results were compared; these clearly indicate that LSSVM can be used to establish a rock failure criterion and to predict the failure of a rock mass during excavation of a circular tunnel.

What do we know about variability?

Directory of Open Access Journals (Sweden)

Sergey G Inge-Vechtomov

2010-12-01

Full Text Available Contemporary phenomenological classification of variability types meets lots of contradictions. There is a single group of “mutations”: gene, chromosomal, genomic ones, which originate through different mechanisms. Ontogenetic variability puts even more questions because it embraces: modifications (regulation of gene expression, genetic variations (mutations and recombination and epigenetic variations (and inheritance in addition, with no clear criterions of the latter ones definition so far. Modifications and heritable variations are appeared to be closer to each other then we suspected before. An alternative classification of variability may be proposed basing upon template principle in biology. There is no direct correspondence between mechanisms and phenomenology of variation. It is a witness of a newparadigm coming in biological variability understanding.

On the upper bound in the Bohm sheath criterion

Energy Technology Data Exchange (ETDEWEB)

Kotelnikov, I. A., E-mail: I.A.Kotelnikov@inp.nsk.su; Skovorodin, D. I., E-mail: D.I.Skovorodin@inp.nsk.su [Russian Academy of Sciences, Budker Institute of Nuclear Physics, Siberian Branch (Russian Federation)

2016-02-15

The question is discussed about the existence of an upper bound in the Bohm sheath criterion, according to which the Debye sheath at the interface between plasma and a negatively charged electrode is stable only if the ion flow velocity in plasma exceeds the ion sound velocity. It is stated that, with an exception of some artificial ionization models, the Bohm sheath criterion is satisfied as an equality at the lower bound and the ion flow velocity is equal to the speed of sound. In the one-dimensional theory, a supersonic flow appears in an unrealistic model of a localized ion source the size of which is less than the Debye length; however, supersonic flows seem to be possible in the two- and three-dimensional cases. In the available numerical codes used to simulate charged particle sources with a plasma emitter, the presence of the upper bound in the Bohm sheath criterion is not supposed; however, the correspondence with experimental data is usually achieved if the ion flow velocity in plasma is close to the ion sound velocity.

Improved Variable Selection Algorithm Using a LASSO-Type Penalty, with an Application to Assessing Hepatitis B Infection Relevant Factors in Community Residents

Science.gov (United States)

Guo, Pi; Zeng, Fangfang; Hu, Xiaomin; Zhang, Dingmei; Zhu, Shuming; Deng, Yu; Hao, Yuantao

2015-01-01

Objectives In epidemiological studies, it is important to identify independent associations between collective exposures and a health outcome. The current stepwise selection technique ignores stochastic errors and suffers from a lack of stability. The alternative LASSO-penalized regression model can be applied to detect significant predictors from a pool of candidate variables. However, this technique is prone to false positives and tends to create excessive biases. It remains challenging to develop robust variable selection methods and enhance predictability. Material and methods Two improved algorithms denoted the two-stage hybrid and bootstrap ranking procedures, both using a LASSO-type penalty, were developed for epidemiological association analysis. The performance of the proposed procedures and other methods including conventional LASSO, Bolasso, stepwise and stability selection models were evaluated using intensive simulation. In addition, methods were compared by using an empirical analysis based on large-scale survey data of hepatitis B infection-relevant factors among Guangdong residents. Results The proposed procedures produced comparable or less biased selection results when compared to conventional variable selection models. In total, the two newly proposed procedures were stable with respect to various scenarios of simulation, demonstrating a higher power and a lower false positive rate during variable selection than the compared methods. In empirical analysis, the proposed procedures yielding a sparse set of hepatitis B infection-relevant factors gave the best predictive performance and showed that the procedures were able to select a more stringent set of factors. The individual history of hepatitis B vaccination, family and individual history of hepatitis B infection were associated with hepatitis B infection in the studied residents according to the proposed procedures. Conclusions The newly proposed procedures improve the identification of

On the ""early-time"" evolution of variables relevant to turbulence models for Rayleigh-Taylor instability

Energy Technology Data Exchange (ETDEWEB)

Rollin, Bertrand [Los Alamos National Laboratory; Andrews, Malcolm J [Los Alamos National Laboratory

2010-01-01

We present our progress toward setting initial conditions in variable density turbulence models. In particular, we concentrate our efforts on the BHR turbulence model for turbulent Rayleigh-Taylor instability. Our approach is to predict profiles of relevant parameters before the fully turbulent regime and use them as initial conditions for the turbulence model. We use an idealized model of the mixing between two interpenetrating fluids to define the initial profiles for the turbulence model parameters. Velocities and volume fractions used in the idealized mixing model are obtained respectively from a set of ordinary differential equations modeling the growth of the Rayleigh-Taylor instability and from an idealization of the density profile in the mixing layer. A comparison between predicted initial profiles for the turbulence model parameters and initial profiles of the parameters obtained from low Atwood number three dimensional simulations show reasonable agreement.

The stressor criterion for posttraumatic stress disorder: Does it matter?

Science.gov (United States)

Roberts, Andrea L.; Dohrenwend, Bruce P.; Aiello, Allison; Wright, Rosalind J.; Maercker, Andreas; Galea, Sandro; Koenen, Karestan C.

2013-01-01

Objective The definition of the stressor criterion for posttraumatic stress disorder (“Criterion A1”) is hotly debated with major revisions being considered for DSM-V. We examine whether symptoms, course, and consequences of PTSD vary predictably with the type of stressful event that precipitates symptoms. Method We used data from the 2009 PTSD diagnostic subsample (N=3,013) of the Nurses Health Study II. We asked respondents about exposure to stressful events qualifying under 1) DSM-III, 2) DSM-IV, or 3) not qualifying under DSM Criterion A1. Respondents selected the event they considered worst and reported subsequent PTSD symptoms. Among participants who met all other DSM-IV PTSD criteria, we compared distress, symptom severity, duration, impairment, receipt of professional help, and nine physical, behavioral, and psychiatric sequelae (e.g. physical functioning, unemployment, depression) by precipitating event group. Various assessment tools were used to determine fulfillment of PTSD Criteria B through F and to assess these 14 outcomes. Results Participants with PTSD from DSM-III events reported on average 1 more symptom (DSM-III mean=11.8 symptoms, DSM-IV=10.7, non-DSM=10.9) and more often reported symptoms lasted one year or longer compared to participants with PTSD from other groups. However, sequelae of PTSD did not vary systematically with precipitating event type. Conclusions Results indicate the stressor criterion as defined by the DSM may not be informative in characterizing PTSD symptoms and sequelae. In the context of ongoing DSM-V revision, these results suggest that Criterion A1 could be expanded in DSM-V without much consequence for our understanding of PTSD phenomenology. Events not considered qualifying stressors under the DSM produced PTSD as consequential as PTSD following DSM-III events, suggesting PTSD may be an aberrantly severe but nonspecific stress response syndrome. PMID:22401487

VALIDITY OF EXCESS ENTROPY PRODUCTION CRITERION OF THERMODYNAMIC STABILITY FOR NONEQUILIBRIUM STEADY STATES

Institute of Scientific and Technical Information of China (English)

吴金平

1991-01-01

The relation between the excess entropy production criterion of thermodynamic stabilityfor nonequilibrium states and kinetic linear stability principle is discussed. It is shown thatthe condition required by the excess entropy production criterion generally is sufficient, butnot necessary to judge the system stability. The condition required by the excess entropyproduction criterion is stronger than that of the linear stability principle. Only when theproduct matrix between the linearized matrix of kinetic equations and matrix of quadraticform of second-order excess entropy is symmetric, is the condition required by the excessentropy production criterion that the steady steate is asymptotically stable (δ_xP>0) necessaryand sufficient. The counterexample given by Fox to prove that the excess entropy, (δ~2S)ss,is not a Liapunov function is incorrect. Contradictory to his conclusion, the counterexampleis just a positive one that proves that the excess entropy is a Liapunov function. Moreover,the excess entropy production criterion is not limited by symmetric conditions of the linear-ized matrix of kinetic equations. The excess entropy around nonequilibrium steady states,(δ~2S)ss, is a Liapunov function of thermodynamic system.

The Mercier Criterion in Reversed Shear Tokamak Plasmas

International Nuclear Information System (INIS)

Kessel, C.; Chance, M.S.; Jardin, S.C.

1999-01-01

A recent numerical study has found that, contrary to conventional theoretical and experimental expectations, reversed shear plasmas are unstable primarily because the term proportional to the shear in the Mercier criterion is destabilizing. In the present study, the role of the magnetic shear, both local and global, is examined for various tokamak configurations with monotonic and non-monotonic safety factor profiles. The enhancement of the local shear due to the outward shift of the magnetic axis suggests that the latter are less susceptible to interchanges. Furthermore, by regrouping the terms in the criterion, the V'' term when differentiated instead with respect to the toroidal flux, is shown to absorb the dominant shear term. No Mercier instability is found for similar profiles as in the previous study

Drinking Water Quality Criterion - Based site Selection of Aquifer Storage and Recovery Scheme in Chou-Shui River Alluvial Fan

Science.gov (United States)

Huang, H. E.; Liang, C. P.; Jang, C. S.; Chen, J. S.

2015-12-01

Land subsidence due to groundwater exploitation is an urgent environmental problem in Choushui river alluvial fan in Taiwan. Aquifer storage and recovery (ASR), where excess surface water is injected into subsurface aquifers for later recovery, is one promising strategy for managing surplus water and may overcome water shortages. The performance of an ASR scheme is generally evaluated in terms of recovery efficiency, which is defined as percentage of water injected in to a system in an ASR site that fulfills the targeted water quality criterion. Site selection of an ASR scheme typically faces great challenges, due to the spatial variability of groundwater quality and hydrogeological condition. This study proposes a novel method for the ASR site selection based on drinking quality criterion. Simplified groundwater flow and contaminant transport model spatial distributions of the recovery efficiency with the help of the groundwater quality, hydrological condition, ASR operation. The results of this study may provide government administrator for establishing reliable ASR scheme.

The Criterion A problem revisited: controversies and challenges in defining and measuring psychological trauma.

Science.gov (United States)

Weathers, Frank W; Keane, Terence M

2007-04-01

The Criterion A problem in the field of traumatic stress refers to the stressor criterion for posttraumatic stress disorder (PTSD) and involves a number of fundamental issues regarding the definition and measurement of psychological trauma. These issues first emerged with the introduction of PTSD as a diagnostic category in the Diagnostic and Statistical Manual of Mental Disorders, Third Edition (DSM-III; American Psychiatric Association, 1980) and continue to generate considerable controversy. In this article, the authors provide an update on the Criterion A problem, with particular emphasis on the evolution of the DSM definition of the stressor criterion and the ongoing debate regarding broad versus narrow conceptualizations of traumatic events.

Human and bovine viruses in the Milwaukee River watershed: Hydrologically relevant representation and relations with environmental variables

Energy Technology Data Exchange (ETDEWEB)

Corsi, S.R., E-mail: srcorsi@usgs.gov [U.S. Geological Survey, Wisconsin Water Science Center, Middleton, WI 53562 (United States); Borchardt, M.A.; Spencer, S.K. [U.S. Department of Agriculture, Agricultural Research Service, 2615 Yellowstone Dr., Marshfield, WI 54449 (United States); Hughes, P.E.; Baldwin, A.K. [U.S. Geological Survey, Wisconsin Water Science Center, Middleton, WI 53562 (United States)

2014-08-15

human exposure and disease transmission. - Highlights: • Hydrologic conditions, precipitation, and season explained variability of viruses. • Human and bovine viruses were more prevalent during runoff periods than during low-flow periods. • An automated sampling system provided hydrologically relevant samples over long durations.

Human and bovine viruses in the Milwaukee River watershed: Hydrologically relevant representation and relations with environmental variables

International Nuclear Information System (INIS)

Corsi, S.R.; Borchardt, M.A.; Spencer, S.K.; Hughes, P.E.; Baldwin, A.K.

2014-01-01

human exposure and disease transmission. - Highlights: • Hydrologic conditions, precipitation, and season explained variability of viruses. • Human and bovine viruses were more prevalent during runoff periods than during low-flow periods. • An automated sampling system provided hydrologically relevant samples over long durations

The role of decision criterion in the Deese-Roediger-McDermott (DRM) false recognition memory: False memory falls and rises as a function of restriction on criterion setting.

Science.gov (United States)

Jou, Jerwen; Escamilla, Eric E; Arredondo, Mario L; Pena, Liann; Zuniga, Richard; Perez, Martin; Garcia, Clarissa

2018-02-01

How much of the Deese-Roediger-McDermott (DRM) false memory is attributable to decision criterion is so far a controversial issue. Previous studies typically used explicit warnings against accepting the critical lure to investigate this issue. The assumption is that if the false memory results from using a liberally biased criterion, it should be greatly reduced or eliminated by an explicit warning against accepting the critical lure. Results showed that warning was generally ineffective. We asked the question of whether subjects can substantially reduce false recognition without being warned when the test forces them to make a distinction between true and false memories. Using a two-alternative forced choice in which criterion plays a relatively smaller role, we showed that subjects could indeed greatly reduce the rate of false recognition. However, when the forced-choice restriction was removed from the two-item choice test, the rate of false recognition rebounded to that of the hit for studied list words, indicating the role of criterion in false recognition.

A criterion for selecting renewable energy processes

International Nuclear Information System (INIS)

Searcy, Erin; Flynn, Peter C.

2010-01-01

We propose that minimum incremental cost per unit of greenhouse gas (GHG) reduction, in essence the carbon credit required to economically sustain a renewable energy plant, is the most appropriate social criterion for choosing from a myriad of alternatives. The application of this criterion is illustrated for four processing alternatives for straw/corn stover: production of power by direct combustion and biomass integrated gasification and combined cycle (BIGCC), and production of transportation fuel via lignocellulosic ethanol and Fischer Tropsch (FT) syndiesel. Ethanol requires a lower carbon credit than FT, and direct combustion a lower credit than BIGCC. For comparing processes that make a different form of end use energy, in this study ethanol vs. electrical power via direct combustion, the lowest carbon credit depends on the relative values of the two energy forms. When power is 70$ MW h -1 , ethanol production has a lower required carbon credit at oil prices greater than 600$ t -1 (80$ bbl -1 ). (author)

Analytical Solution of Tunnel Surrounding Rock for Stress and Displacement Based on Lade–Duncan Criterion

Directory of Open Access Journals (Sweden)

MingZheng Zhu

2018-01-01

Full Text Available The deformation and failure of tunnel surrounding rock is the result of tunnel excavation disturbance and rock stress release. When the local stress of surrounding rock exceeds the elastic limit of rock mass, the plastic analysis of surrounding rock must be carried out to judge the stability of tunnel. In this study, the Lade–Duncan yield criterion is used to calculate the analytic solutions for the surrounding rock in a tunnel, and the radius and displacement of the plastic zone are deduced using an equilibrium equation. The plastic zone radius and displacement based on Lade–Duncan criterion and Mohr–Coulomb criterion were compared by using single-factor analysis method under the different internal friction angles, in situ stresses, and support resistances. The results show that the solutions of the radius and displacement of plastic zone calculated by the Lade–Duncan criterion are close to those of Mohr–Coulomb criterion under the high internal friction angle and support resistance or low in situ rock stress; however, the radius and displacement of the plastic zone calculated by the Lade–Duncan criterion are larger under normal circumstances, and the Lade–Duncan criterion is more applicable to the stability analysis of the surrounding rock in a tunnel.

Criterion for the nuclearity of spaces of functions of infinite number of variables

International Nuclear Information System (INIS)

Gali, I.M.

1977-08-01

The paper formulates a new necessary and sufficient condition for the nuclearity of spaces of infinite number of variables, and defines new nuclear spaces which play an important role in the field of functional analysis and quantum field theory. Also the condition for nuclearity of the infinite weighted tensor product of nuclear spaces is given

Revealing Relationships among Relevant Climate Variables with Information Theory

Science.gov (United States)

Knuth, Kevin H.; Golera, Anthony; Curry, Charles T.; Huyser, Karen A.; Kevin R. Wheeler; Rossow, William B.

2005-01-01

The primary objective of the NASA Earth-Sun Exploration Technology Office is to understand the observed Earth climate variability, thus enabling the determination and prediction of the climate's response to both natural and human-induced forcing. We are currently developing a suite of computational tools that will allow researchers to calculate, from data, a variety of information-theoretic quantities such as mutual information, which can be used to identify relationships among climate variables, and transfer entropy, which indicates the possibility of causal interactions. Our tools estimate these quantities along with their associated error bars, the latter of which is critical for describing the degree of uncertainty in the estimates. This work is based upon optimal binning techniques that we have developed for piecewise-constant, histogram-style models of the underlying density functions. Two useful side benefits have already been discovered. The first allows a researcher to determine whether there exist sufficient data to estimate the underlying probability density. The second permits one to determine an acceptable degree of round-off when compressing data for efficient transfer and storage. We also demonstrate how mutual information and transfer entropy can be applied so as to allow researchers not only to identify relations among climate variables, but also to characterize and quantify their possible causal interactions.

A critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction

Directory of Open Access Journals (Sweden)

Adam Niesłony

2016-10-01

Full Text Available Multiaxial fatigue failure criteria are formulated in time and frequency domain. The number of frequency domain criteria is rather small and the most popular one is the equivalent von Mises stress criterion. This criterion was elaborated by Preumont and Piefort on the basis of well-known von Mises stress concept, first proposed by Huber in 1907, and well accepted by the scientific community and engineers. It is important to know, that the criterion was developed to determine the yield stress and material effort under static load. Therefore the direct use of equivalent von Mises stress criterion for fatigue life prediction can lead to some incorrectness of theoretical and practical nature. In the present study four aspects were discussed: influence of the value of fatigue strength of tension and torsion, lack of parallelism of the SN curves, abnormal behaviour of the criterion under biaxial tensioncompression and influence of phase shift between particular stress state components. Information contained in this article will help to prevent improper use of this criterion and contributes to its better understanding

Inferring phylogenetic networks by the maximum parsimony criterion: a case study.

Science.gov (United States)

Jin, Guohua; Nakhleh, Luay; Snir, Sagi; Tuller, Tamir

2007-01-01

Horizontal gene transfer (HGT) may result in genes whose evolutionary histories disagree with each other, as well as with the species tree. In this case, reconciling the species and gene trees results in a network of relationships, known as the "phylogenetic network" of the set of species. A phylogenetic network that incorporates HGT consists of an underlying species tree that captures vertical inheritance and a set of edges which model the "horizontal" transfer of genetic material. In a series of papers, Nakhleh and colleagues have recently formulated a maximum parsimony (MP) criterion for phylogenetic networks, provided an array of computationally efficient algorithms and heuristics for computing it, and demonstrated its plausibility on simulated data. In this article, we study the performance and robustness of this criterion on biological data. Our findings indicate that MP is very promising when its application is extended to the domain of phylogenetic network reconstruction and HGT detection. In all cases we investigated, the MP criterion detected the correct number of HGT events required to map the evolutionary history of a gene data set onto the species phylogeny. Furthermore, our results indicate that the criterion is robust with respect to both incomplete taxon sampling and the use of different site substitution matrices. Finally, our results show that the MP criterion is very promising in detecting HGT in chimeric genes, whose evolutionary histories are a mix of vertical and horizontal evolution. Besides the performance analysis of MP, our findings offer new insights into the evolution of 4 biological data sets and new possible explanations of HGT scenarios in their evolutionary history.

Information criterion for the categorization quality evaluation

Directory of Open Access Journals (Sweden)

Michail V. Svirkin

2011-05-01

Full Text Available The paper considers the possibility of using the variation of information function as a quality criterion for categorizing a collection of documents. The performance of the variation of information function is being examined subject to the number of categories and the sample volume of the test document collection.

Bell's theorem based on a generalized EPR criterion of reality

International Nuclear Information System (INIS)

Eberhard, P.H.; Rosselet, P.

1995-01-01

First, the demonstration of Bell's theorem, i.e., of the nonlocal character of quantum theory, is spelled out using the EPR criterion of reality as premises and a gedanken experiment involving two particles. Then, the EPR criterion is extended to include quantities predicted almost with certainty, and Bell's theorem is demonstrated on these new premises. The same experiment is used but in conditions that become possible in real life, without the requirements of ideal efficiencies and zero background. Very high efficiencies and low background are needed, but these requirements may be met in the future

Optimization of Thermal Object Nonlinear Control Systems by Energy Efficiency Criterion.

Science.gov (United States)

Velichkin, Vladimir A.; Zavyalov, Vladimir A.

2018-03-01

This article presents the results of thermal object functioning control analysis (heat exchanger, dryer, heat treatment chamber, etc.). The results were used to determine a mathematical model of the generalized thermal control object. The appropriate optimality criterion was chosen to make the control more energy-efficient. The mathematical programming task was formulated based on the chosen optimality criterion, control object mathematical model and technological constraints. The “maximum energy efficiency” criterion helped avoid solving a system of nonlinear differential equations and solve the formulated problem of mathematical programming in an analytical way. It should be noted that in the case under review the search for optimal control and optimal trajectory reduces to solving an algebraic system of equations. In addition, it is shown that the optimal trajectory does not depend on the dynamic characteristics of the control object.

Optimal Conformal Polynomial Projections for Croatia According to the Airy/Jordan Criterion

Directory of Open Access Journals (Sweden)

Dražen Tutić

2009-05-01

Full Text Available The paper describes optimal conformal polynomial projections for Croatia according to the Airy/Jordan criterion. A brief introduction of history and theory of conformal mapping is followed by descriptions of conformal polynomial projections and their current application. The paper considers polynomials of degrees 1 to 10. Since there are conditions in which the 1st degree polynomial becomes the famous Mercator projection, it was not considered specifically for Croatian territory. The area of Croatia was defined as a union of national territory and the continental shelf. Area definition data were taken from the Euro Global Map 1:1 000 000 for Croatia, as well as from two maritime delimitation treaties. Such an irregular area was approximated with a regular grid consisting of 11 934 ellipsoidal trapezoids 2' large. The Airy/Jordan criterion for the optimal projection is defined as minimum of weighted mean of Airy/Jordan measure of distortion in points. The value of the Airy/Jordan criterion is calculated from all 11 934 centres of ellipsoidal trapezoids, while the weights are equal to areas of corresponding ellipsoidal trapezoids. The minimum is obtained by Nelder and Mead’s method, as implemented in the fminsearch function of the MATLAB package. Maps of Croatia representing the distribution of distortions are given for polynomial degrees 2 to 6 and 10. Increasing the polynomial degree results in better projections considering the criterion, and the 6th degree polynomial provides a good ratio of formula complexity and criterion value.

Role of optimization criterion in static asymmetric analysis of lumbar spine load.

Science.gov (United States)

Daniel, Matej

2011-10-01

A common method for load estimation in biomechanics is the inverse dynamics optimization, where the muscle activation pattern is found by minimizing or maximizing the optimization criterion. It has been shown that various optimization criteria predict remarkably similar muscle activation pattern and intra-articular contact forces during leg motion. The aim of this paper is to study the effect of the choice of optimization criterion on L4/L5 loading during static asymmetric loading. Upright standing with weight in one stretched arm was taken as a representative position. Musculoskeletal model of lumbar spine model was created from CT images of Visible Human Project. Several criteria were tested based on the minimization of muscle forces, muscle stresses, and spinal load. All criteria provide the same level of lumbar spine loading (difference is below 25%), except the criterion of minimum lumbar shear force which predicts unrealistically high spinal load and should not be considered further. Estimated spinal load and predicted muscle force activation pattern are in accordance with the intradiscal pressure measurements and EMG measurements. The L4/L5 spine loads 1312 N, 1674 N, and 1993 N were predicted for mass of weight in hand 2, 5, and 8 kg, respectively using criterion of mininum muscle stress cubed. As the optimization criteria do not considerably affect the spinal load, their choice is not critical in further clinical or ergonomic studies and computationally simpler criterion can be used.

Electronics. Criterion-Referenced Test (CRT) Item Bank.

Science.gov (United States)

Davis, Diane, Ed.

This document contains 519 criterion-referenced multiple choice and true or false test items for a course in electronics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and the Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 15 units covering the…

Mei Symmetry and New Conserved Quantities of Tzénoff Equations for the Variable Mass Higher-Order Nonholonomic System

Institute of Scientific and Technical Information of China (English)

ZHENG Shi-Wang; WANG Jian-Bo; CHEN Xiang-Wei; XIE Jia-Fang

2012-01-01

Operational systems of spacecraft are general variable mass mechanics systems,and their symmetries and conserved quantities imply profound physical rules of the space system.We study the Mei symmetry of Tzénoff equations for a variable mass nonholonomic system and the new conserved quantities derived.The function expression of the new conserved quantities and the criterion equation which deduces these conserved quantities are presented.This result has some theoretical values in further research of conservation laws obeyed by the variable mass system.%Operational systems of spacecraft are general variable mass mechanics systems, and their symmetries and conserved quantities imply profound physical rules of the space system. We study the Mei symmetry of Tzenoff equations for a variable mass nonholonomic system and the new conserved quantities derived. The function expression of the new conserved quantities and the criterion equation which deduces these conserved quantities are presented. This result has some theoretical values in further research of conservation laws obeyed by the variable mass system.

The Bohm Criterion for Radiofrequency Discharges - a Numerical Verification Based on Poisson Equation

NARCIS (Netherlands)

Meijer, P. M.; W. J. Goedheer,

1993-01-01

Recently it was shown that, by using the analysis of electrostatic waves entering the plasma-sheath edge, the direct-current (dc) Bohm criterion also holds for discharges under radio-frequency (rf) conditions. In this paper, the influence of Bohm's criterion on the sheath characteristics for

An Integrated Pruning Criterion for Ensemble Learning Based on Classification Accuracy and Diversity

DEFF Research Database (Denmark)

Fu, Bin; Wang, Zhihai; Pan, Rong

2013-01-01

be further considered while designing a pruning criterion is presented, and then an effective definition of diversity is proposed. The experimental results have validated that the given pruning criterion could single out the subset of classifiers that show better performance in the process of hill...

PLS-based and regularization-based methods for the selection of relevant variables in non-targeted metabolomics data

Directory of Open Access Journals (Sweden)

Renata Bujak

2016-07-01

Full Text Available Non-targeted metabolomics constitutes a part of systems biology and aims to determine many metabolites in complex biological samples. Datasets obtained in non-targeted metabolomics studies are multivariate and high-dimensional due to the sensitivity of mass spectrometry-based detection methods as well as complexity of biological matrices. Proper selection of variables which contribute into group classification is a crucial step, especially in metabolomics studies which are focused on searching for disease biomarker candidates. In the present study, three different statistical approaches were tested using two metabolomics datasets (RH and PH study. Orthogonal projections to latent structures-discriminant analysis (OPLS-DA without and with multiple testing correction as well as least absolute shrinkage and selection operator (LASSO were tested and compared. For the RH study, OPLS-DA model built without multiple testing correction, selected 46 and 218 variables based on VIP criteria using Pareto and UV scaling, respectively. In the case of the PH study, 217 and 320 variables were selected based on VIP criteria using Pareto and UV scaling, respectively. In the RH study, OPLS-DA model built with multiple testing correction, selected 4 and 19 variables as statistically significant in terms of Pareto and UV scaling, respectively. For PH study, 14 and 18 variables were selected based on VIP criteria in terms of Pareto and UV scaling, respectively. Additionally, the concept and fundaments of the least absolute shrinkage and selection operator (LASSO with bootstrap procedure evaluating reproducibility of results, was demonstrated. In the RH and PH study, the LASSO selected 14 and 4 variables with reproducibility between 99.3% and 100%. However, apart from the popularity of PLS-DA and OPLS-DA methods in metabolomics, it should be highlighted that they do not control type I or type II error, but only arbitrarily establish a cut-off value for PLS-DA loadings

Zero mass field quantization and Kibble's long-range force criterion for the Goldstone theorem

International Nuclear Information System (INIS)

Wright, S.H.

1981-01-01

The central theme of the dissertation is an investigation of the long-range force criterion used by Kibble in his discussion of the Goldstone Theorem. This investigation is broken up into the following sections: I. Introduction. Spontaneous symmetry breaking, the Goldstone Theorem and the conditions under which it holds are discussed. II. Massless Wave Expansions. In order to make explicit calculations of the operator commutators used in applying Kibble's criterion, it is necessary to work out the operator expansions for a massless field. Unusual results are obtained which include operators corresponding to classical macroscopic field modes. III. The Kibble Criterion for Simple Models Exhibiting Spontaneously Broken Symmetries. The results of the previous section are applied to simple models with spontaneously broken symmetries, namely, the real scalar massless field and the Goldstone model without gauge coupling. IV. The Higgs Mechanism in Classical Field Theory. It is shown that the Higgs Mechanism has a simple interpretation in terms of classical field theory, namely, that it arises from a derivative coupling term between the Goldstone fields and the gauge fields. V. The Higgs Mechanism and Kibble's Criterion. This section draws together the material discussed in sections II to IV. Explicit calculations are made to evaluate Kibble's criterion on a Goldstone-Higgs type of model in the Coulomb gauge. It is found, as expected, that the criterion is not met, but not for reasons relating to the range of the mediating force. By referring to the findings of sections III and IV, it is concluded that the common denominator underlying both the Higgs Mechanism and the failure of Kibble's criterion is a structural aspect of the field equations: derivative coupling between fields

A characterization of optimal portfolios under the tail mean-variance criterion

OpenAIRE

Owadally, I.; Landsman, Z.

2013-01-01

The tail mean–variance model was recently introduced for use in risk management and portfolio choice; it involves a criterion that focuses on the risk of rare but large losses, which is particularly important when losses have heavy-tailed distributions. If returns or losses follow a multivariate elliptical distribution, the use of risk measures that satisfy certain well-known properties is equivalent to risk management in the classical mean–variance framework. The tail mean–variance criterion...

Evidence for the Criterion Validity and Clinical Utility of the Pathological Narcissism Inventory

Science.gov (United States)

Thomas, Katherine M.; Wright, Aidan G. C.; Lukowitsky, Mark R.; Donnellan, M. Brent; Hopwood, Christopher J.

2012-01-01

In this study, the authors evaluated aspects of criterion validity and clinical utility of the grandiosity and vulnerability components of the Pathological Narcissism Inventory (PNI) using two undergraduate samples (N = 299 and 500). Criterion validity was assessed by evaluating the correlations of narcissistic grandiosity and narcissistic…

Botanical Criterions of Quchan Baharkish pastureland in Khorasan ...

African Journals Online (AJOL)

ADOWIE PERE

Botanical Criterions of Quchan Baharkish pastureland in Khorasan Razavi Province,. Iran. *1SAEED, JAHEDI POUR 2ALIREZA, KOOCHEKI 3MEHDI, NASSIRI. MAHALLATI 4PARVIZ REZVANI MOGHADDAM. 1Department of Agroecology and Plant Breeding, Ferdowsi. University of Mashhad International Campus, ...

Bell's theorem based on a generalized EPR criterion of reality

International Nuclear Information System (INIS)

Eberhard, P.H.; Rosselet, P.

1993-04-01

First, the demonstration of Bell's theorem, i.e. of the non-local character of quantum theory, is spelled out using the EPR criterion of reality as premises and a gedanken experiment involving two particles. Then, the EPR criterion is extended to include quantities predicted almost with certainty, and Bell's theorem is demonstrated on these new premises. The same experiment is used but in conditions that become possible in real life, without the requirements of ideal efficiencies and zero background. Very high efficiencies and low background are needed, but these requirements may be met in the future. (author) 1 fig., 11 refs

Characteristics of Criterion-Referenced Instruments: Implications for Materials Selection for the Learning Disabled.

Science.gov (United States)

Blasi, Joyce F.

Discussed are characteristics of criterion referenced reading tests for use with learning disabled (LD) children, and analyzed are the Basic Educational Skills Inventory (BESI), the Prescriptive Reading Inventory (PRI), and the Cooper-McGuire Diagnostic Work-Analysis Test (CooperMcGuire). Criterion referenced tests are defined; and problems in…

Changing the criterion for memory conformity in free recall and recognition.

Science.gov (United States)

Wright, Daniel B; Gabbert, Fiona; Memon, Amina; London, Kamala

2008-02-01

People's responses during memory studies are affected by what other people say. This memory conformity effect has been shown in both free recall and recognition. Here we examine whether accurate, inaccurate, and suggested answers are affected similarly when the response criterion is varied. In the first study, participants saw four pictures of detailed scenes and then discussed the content of these scenes with another participant who saw the same scenes, but with a couple of details changed. Participants were either told to recall everything they could and not to worry about making mistakes (lenient), or only to recall items if they were sure that they were accurate (strict). The strict instructions reduced the amount of inaccurate information reported that the other person suggested, but also reduced the number of accurate details recalled. In the second study, participants were shown a large set of faces and then their memory recognition was tested with a confederate on these and fillers. Here also, the criterion manipulation shifted both accurate and inaccurate responses, and those suggested by the confederate. The results are largely consistent with a shift in response criterion affecting accurate, inaccurate, and suggested information. In addition we varied the level of secrecy in the participants' responses. The effects of secrecy were complex and depended on the level of response criterion. Implications for interviewing eyewitnesses and line-ups are discussed.

Criterion of Semi-Markov Dependent Risk Model

Institute of Scientific and Technical Information of China (English)

Xiao Yun MO; Xiang Qun YANG

2014-01-01

A rigorous definition of semi-Markov dependent risk model is given. This model is a generalization of the Markov dependent risk model. A criterion and necessary conditions of semi-Markov dependent risk model are obtained. The results clarify relations between elements among semi-Markov dependent risk model more clear and are applicable for Markov dependent risk model.

Change in the alpha criterion policy: variable based on the maximum individual dose function

International Nuclear Information System (INIS)

Freitas Acosta Perez, C. de; Sordi, G.M.A.A.

2006-01-01

The Alpha value is an extremely important criterion because it determines the time that a country takes to achieve its proposals in order to decrease the workers doses involved with ionizing radiation sources. Currently the countries adopt a single value for alpha based on the annual gross national product, GNP, per capita. The aim of this paper is to show that the selection of a curve for the alpha in place of a single value would be more efficient. This curve would provide alpha values that would will be constraints to the biggest individual doses presented in each optimization process as applied both to designs and to operations. These maximum individual doses would represent the dose distribution among the workers team. To build the curve, the alpha values suggested are not based on the GNP per capita but on a distribution function of the maximum individual doses and on the time necessary to reach the proposal of 1/10 of the annual dose limit foreseen in the sequential optimization processes, that is to reach the region where the individual doses are considered acceptable. So, the differential equations will be - d X/dS =α(H m ax). To clarify our sight about the alpha value we started using the uranium mine example presented in ICRP publication 55, adopting the decision-aiding technique known as extended cost-benefit. for right. Then we used the same example in a hypothetical curve with portions: constant, linear, quadratic and exponential. Eventually we discussed briefly the different shapes of the curves that the alpha value can assume in function of the individual doses. Each of these shapes can correspond to the so called 'risk neutral attitude', 'risk adverse attitude' or 'risk prone attitude' suggested in the appendix B of the ICRP publication 55

A simple stability criterion for CANDU figure-of-eight flow oscillations

International Nuclear Information System (INIS)

Gulshani, P.; Spinks, N.J.

1983-01-01

Potential flow oscillations in CANDU reactor primary heat transport system are analyzed in terms of a simple, linearized model. A simple, algebraic stability criterion is obtained. The model predictions are found to be in good agreement with those of thermohydraulic codes for high pressure natural circulation conditions. For normal operating conditions the criterion predicts the correct trend but overlooks important stabilizing effects. The model clarifies the instability mechanism; namely the response of enthalpy and, hence, pressure in the boiling region to flow change

Carbon emissions and an equitable emission reduction criterion

International Nuclear Information System (INIS)

Golomb, Dan

1999-01-01

In 1995 the world-wide carbon emissions reached 5.8 billion metric tonnes per year (GTC/y). The Kyoto protocol calls for a reduction of carbon emissions from the developed countries (Annex I countries) of 6-8% below 1990 levels on the average, and unspecified commitments for the less developed (non-Annex I) countries. It is doubtful that the Kyoto agreement will be ratified by some parliaments, especially the USA Congress. Furthermore, it is shown that if the non-Annex I countries will not curtail their carbon emissions drastically, the global emissions will soar to huge levels by the middle of the next century. An equitable emission criterion is proposed which may lead to a sustainable rate of growth of carbon emissions, and be acceptable to all countries of the world. The criterion links the rate of growth of carbon emissions to the rate of growth of the Gross Domestic Product (GDP). A target criterion is proposed R = 0.15 KgC/SGDP, which is the current average for western European countries and Japan. This allows for both the growth of the GDP and carbon emissions. However, to reach the target in a reasonable time, the countries for which R≤ 0.3 would be allowed a carbon emission growth rate of 1%./y, and countries for which R≥ 0.3, 0.75%/y. It is shown that by 2050 the world-wide carbon emissions would reach about 10 GTC/y, which is about 3 times less than the Kyoto agreement would allow. (Author)

PTSD's risky behavior criterion: Relation with DSM-5 PTSD symptom clusters and psychopathology.

Science.gov (United States)

Contractor, Ateka A; Weiss, Nicole H; Dranger, Paula; Ruggero, Camilo; Armour, Cherie

2017-06-01

A new symptom criterion of reckless and self-destructive behaviors (E2) was recently added to posttraumatic stress disorder's (PTSD) diagnostic criteria in DSM-5, which is unsurprising given the well-established relation between PTSD and risky behaviors. Researchers have questioned the significance and incremental validity of this symptom criterion within PTSD's symptomatology. Unprecedented to our knowledge, we aim to compare trauma-exposed groups differing on their endorsement status of the risky behavior symptom on several psychopathology constructs (PTSD, depression, distress tolerance, rumination, anger). The sample included 123 trauma-exposed participants seeking mental health treatment (M age=35.70; 68.30% female) who completed self-report questionnaires assessing PTSD symptoms, depression, rumination, distress tolerance, and anger. Results of independent samples t-tests indicated that participants who endorsed the E2 criterion at a clinically significant level reported significantly greater PTSD subscale severity; depression severity; rumination facets of repetitive thoughts, counterfactual thinking, and problem-focused thinking; and anger reactions; and significantly less absorption and regulation (distress tolerance facets) compared to participants who did not endorse the E2 criterion at a clinically significant level. Results indicate the utility of the E2 criterion in identifying trauma-exposed individual with greater posttraumatic distress, and emphasize the importance of targeting such behaviors in treatment. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Variable-Reluctance Motor For Electric Vehicles

Science.gov (United States)

Lang, Jeffrey H.

1987-01-01

Report describes research on variable-reluctance electric-motor drive for eventual use in electric-vehicle propulsion. Primary design and performance criteria were torque and power output per unit mass of motor, cost, and drive efficiency. For each criterion, optimized drive design developed, and designs unified to yield single electric-vehicle drive. Scaled-down motor performed as expected. Prototype of paraplegic lift operated by toggle switch and joystick. Lift plugs into household electrical outlet for recharging when not in use.

On the Modified Barkhausen Criterion

DEFF Research Database (Denmark)

Lindberg, Erik; Murali, K.

2016-01-01

Oscillators are normally designed according to the Modified Barkhausen Criterion i.e. the complex pole pair is moved out in RHP so that the linear circuit becomes unstable. By means of the Mancini Phaseshift Oscillator it is demonstrated that the distortion of the oscillator may be minimized by i...... by introducing a nonlinear ”Hewlett Resistor” so that the complex pole-pair is in the RHP for small signals and in the LHP for large signals i.e. the complex pole pair of the instant linearized small signal model is moving around the imaginary axis in the complex frequency plane....

Use of the Niyama criterion to predict porosity of the mushy zone with deformation

Directory of Open Access Journals (Sweden)

S. Polyakov

2011-10-01

Full Text Available The article presents new results on the use of the Niyama criterion to estimate porosity appearance in castings under hindered shrinkage. The effect of deformation of the mushy zone on filtration is shown. A new form of the Niyama criterion accounting for the hindered shrinkage and the range of deformation localization has been obtained. The results of this study are illustrated by the examp le of the Niyama criterion calculated for Al-Cu alloys under different diffusion conditions of solidification and rate of deformation in the mushy zone. Derived equations can be used in a mathematical model of the casting solidification as well as for interpretation of the simulation results of casting solidification under hindered shrinkage. The presented study resulted in a new procedure of using the Niyama criterion under mushy zone deformation.

Prioritising transport infrastructure projects: towards a multi-criterion ...

African Journals Online (AJOL)

Kirstam

multi-criterion analysis (MCA), partial equilibrium analysis, project appraisal ... In the case of transport infrastructure projects, though, this is no mean ... vehicle ownership and mileage-based depreciation (an improved road network and/ .... urban, rural or regional development initiatives – they typically include one or more.

Decision models for use with criterion-referenced tests

NARCIS (Netherlands)

van der Linden, Willem J.

1980-01-01

The problem of mastery decisions and optimizing cutoff scores on criterion-referenced tests is considered. This problem can be formalized as an (empirical) Bayes problem with decisions rules of a monotone shape. Next, the derivation of optimal cutoff scores for threshold, linear, and normal ogive

Utilization of Durability Criterion to Develop Automotive Components

DEFF Research Database (Denmark)

Ricardo, Luiz Carlos Hernandes

2010-01-01

Today the automotive companies must reduce the time to development of new products with improvement in performance, durability and low cost reductions where possible. To achieve this goal the carmakers need to improve the design criterion of car systems like body, chassis and suspension component...

Error Variability in Apraxia of Speech: A Matter of Controversy

Science.gov (United States)

Staiger, Anja; Finger-Berg, Wolf; Aichert, Ingrid; Ziegler, Wolfram

2012-01-01

Purpose: Error variability has traditionally been considered a hallmark of apraxia of speech (AOS). However, in some of the current AOS literature, relatively invariable error patterns are claimed as a mandatory criterion for a diagnosis of AOS. This paradigm shift has far-reaching consequences for our understanding of the disorder and for its…

On the gap-opening criterion of migrating planets in protoplanetary disks

OpenAIRE

Malik, Matej; Meru, Farzana; Mayer, Lucio; Meyer, Michael R.

2015-01-01

We perform two-dimensional hydrodynamical simulations to quantitatively explore the torque balance criterion for gap-opening (as formulated by Crida et al.) in a variety of disks when considering a migrating planet. We find that even when the criterion is satisfied, there are instances when planets still do not open gaps. We stress that gap-opening is not only dependent on whether a planet has the ability to open a gap, but whether it can do so quickly enough. This can be expressed as an addi...

A second perspective on the Amann–Schmiedl–Seifert criterion for non-equilibrium in a three-state system

International Nuclear Information System (INIS)

Jia, Chen; Chen, Yong

2015-01-01

In the work of Amann, Schmiedl and Seifert (2010 J. Chem. Phys. 132 041102), the authors derived a sufficient criterion to identify a non-equilibrium steady state (NESS) in a three-state Markov system based on the coarse-grained information of two-state trajectories. In this paper, we present a mathematical derivation and provide a probabilistic interpretation of the Amann–Schmiedl–Seifert (ASS) criterion. Moreover, the ASS criterion is compared with some other criterions for a NESS. (paper)

On global stability criterion for neural networks with discrete and distributed delays

International Nuclear Information System (INIS)

Park, Ju H.

2006-01-01

Based on the Lyapunov functional stability analysis for differential equations and the linear matrix inequality (LMI) optimization approach, a new delay-dependent criterion for neural networks with discrete and distributed delays is derived to guarantee global asymptotic stability. The criterion is expressed in terms of LMIs, which can be solved easily by various convex optimization algorithms. Some numerical examples are given to show the effectiveness of proposed method

A Criterion for Stability of Synchronization and Application to Coupled Chua's Systems

International Nuclear Information System (INIS)

Wang Haixia; Lu Qishao; Wang Qingyun

2009-01-01

We investigate synchronization in an array network of nearest-neighbor coupled chaotic oscillators. By using of the Lyapunov stability theory and matrix theory, a criterion for stability of complete synchronization is deduced. Meanwhile, an estimate of the critical coupling strength is obtained to ensure achieving chaos synchronization. As an example application, a model of coupled Chua's circuits with linearly bidirectional coupling is studied to verify the validity of the criterion. (general)

A novel delay-dependent criterion for delayed neural networks of neutral type

International Nuclear Information System (INIS)

Lee, S.M.; Kwon, O.M.; Park, Ju H.

2010-01-01

This Letter considers a robust stability analysis method for delayed neural networks of neutral type. By constructing a new Lyapunov functional, a novel delay-dependent criterion for the stability is derived in terms of LMIs (linear matrix inequalities). A less conservative stability criterion is derived by using nonlinear properties of the activation function of the neural networks. Two numerical examples are illustrated to show the effectiveness of the proposed method.

Sensitivity analysis of respiratory parameter uncertainties: impact of criterion function form and constraints.

Science.gov (United States)

Lutchen, K R

1990-08-01

A sensitivity analysis based on weighted least-squares regression is presented to evaluate alternative methods for fitting lumped-parameter models to respiratory impedance data. The goal is to maintain parameter accuracy simultaneously with practical experiment design. The analysis focuses on predicting parameter uncertainties using a linearized approximation for joint confidence regions. Applications are with four-element parallel and viscoelastic models for 0.125- to 4-Hz data and a six-element model with separate tissue and airway properties for input and transfer impedance data from 2-64 Hz. The criterion function form was evaluated by comparing parameter uncertainties when data are fit as magnitude and phase, dynamic resistance and compliance, or real and imaginary parts of input impedance. The proper choice of weighting can make all three criterion variables comparable. For the six-element model, parameter uncertainties were predicted when both input impedance and transfer impedance are acquired and fit simultaneously. A fit to both data sets from 4 to 64 Hz could reduce parameter estimate uncertainties considerably from those achievable by fitting either alone. For the four-element models, use of an independent, but noisy, measure of static compliance was assessed as a constraint on model parameters. This may allow acceptable parameter uncertainties for a minimum frequency of 0.275-0.375 Hz rather than 0.125 Hz. This reduces data acquisition requirements from a 16- to a 5.33- to 8-s breath holding period. These results are approximations, and the impact of using the linearized approximation for the confidence regions is discussed.

Gender differences in variability patterns of forward bending

DEFF Research Database (Denmark)

Villumsen, Morten; Madeleine, Pascal; Jørgensen, Marie Birk

2016-01-01

The variability pattern is highly relevant in the analysis of occupational physical exposures. It is hypothesized that gender differences exist in the variability pattern of forward bending between work and leisure.......The variability pattern is highly relevant in the analysis of occupational physical exposures. It is hypothesized that gender differences exist in the variability pattern of forward bending between work and leisure....

Criterion-based laparoscopic training reduces total training time

NARCIS (Netherlands)

Brinkman, W.M.; Buzink, S.N.; Alevizos, L.; De Hingh, I.H.J.T.; Jakimowicz, J.J.

2011-01-01

The benefits of criterion-based laparoscopic training over time-oriented training are unclear. The purpose of this study is to compare these types of training based on training outcome and time efficiency. Methods During four training sessions within 1 week (one session per day) 34 medical interns

Scientific Issues Relevant to Setting Regulatory Criteria to Identify Endocrine-Disrupting Substances in the European Union.

Science.gov (United States)

Slama, Rémy; Bourguignon, Jean-Pierre; Demeneix, Barbara; Ivell, Richard; Panzica, Giancarlo; Kortenkamp, Andreas; Zoeller, R Thomas

2016-10-01

Endocrine disruptors (EDs) are defined by the World Health Organization (WHO) as exogenous compounds or mixtures that alter function(s) of the endocrine system and consequently cause adverse effects in an intact organism, or its progeny, or (sub)populations. European regulations on pesticides, biocides, cosmetics, and industrial chemicals require the European Commission to establish scientific criteria to define EDs. We address the scientific relevance of four options for the identification of EDs proposed by the European Commission. Option 1, which does not define EDs and leads to using interim criteria unrelated to the WHO definition of EDs, is not relevant. Options 2 and 3 rely on the WHO definition of EDs, which is widely accepted by the scientific community, with option 3 introducing additional categories based on the strength of evidence (suspected EDs and endocrine-active substances). Option 4 adds potency to the WHO definition, as a decision criterion. We argue that potency is dependent on the adverse effect considered and is scientifically ambiguous, and note that potency is not used as a criterion to define other particularly hazardous substances such as carcinogens and reproductive toxicants. The use of potency requires a context that goes beyond hazard identification and corresponds to risk characterization, in which potency (or, more relevantly, the dose-response function) is combined with exposure levels. There is scientific agreement regarding the adequacy of the WHO definition of EDs. The potency concept is not relevant to the identification of particularly serious hazards such as EDs. As is common practice for carcinogens, mutagens, and reproductive toxicants, a multi-level classification of ED based on the WHO definition, and not considering potency, would be relevant (corresponding to option 3 proposed by the European Commission). Slama R, Bourguignon JP, Demeneix B, Ivell R, Panzica G, Kortenkamp A, Zoeller RT. 2016. Scientific issues relevant

Corner-point criterion for assessing nonlinear image processing imagers

Science.gov (United States)

Landeau, Stéphane; Pigois, Laurent; Foing, Jean-Paul; Deshors, Gilles; Swiathy, Greggory

2017-10-01

Range performance modeling of optronics imagers attempts to characterize the ability to resolve details in the image. Today, digital image processing is systematically used in conjunction with the optoelectronic system to correct its defects or to exploit tiny detection signals to increase performance. In order to characterize these processing having adaptive and non-linear properties, it becomes necessary to stimulate the imagers with test patterns whose properties are similar to the actual scene image ones, in terms of dynamic range, contours, texture and singular points. This paper presents an approach based on a Corner-Point (CP) resolution criterion, derived from the Probability of Correct Resolution (PCR) of binary fractal patterns. The fundamental principle lies in the respectful perception of the CP direction of one pixel minority value among the majority value of a 2×2 pixels block. The evaluation procedure considers the actual image as its multi-resolution CP transformation, taking the role of Ground Truth (GT). After a spatial registration between the degraded image and the original one, the degradation is statistically measured by comparing the GT with the degraded image CP transformation, in terms of localized PCR at the region of interest. The paper defines this CP criterion and presents the developed evaluation techniques, such as the measurement of the number of CP resolved on the target, the transformation CP and its inverse transform that make it possible to reconstruct an image of the perceived CPs. Then, this criterion is compared with the standard Johnson criterion, in the case of a linear blur and noise degradation. The evaluation of an imaging system integrating an image display and a visual perception is considered, by proposing an analysis scheme combining two methods: a CP measurement for the highly non-linear part (imaging) with real signature test target and conventional methods for the more linear part (displaying). The application to

Refocusing criterion via sparsity measurements in digital holography.

Science.gov (United States)

Memmolo, Pasquale; Paturzo, Melania; Javidi, Bahram; Netti, Paolo A; Ferraro, Pietro

2014-08-15

Several automatic approaches have been proposed in the past to compute the refocus distance in digital holography (DH). However most of them are based on a maximization or minimization of a suitable amplitude image contrast measure, regarded as a function of the reconstruction distance parameter. Here we show that, by using the sparsity measure coefficient regarded as a refocusing criterion in the holographic reconstruction, it is possible to recover the focus plane and, at the same time, establish the degree of sparsity of digital holograms, when samples of the diffraction Fresnel propagation integral are used as a sparse signal representation. We employ a sparsity measurement coefficient known as Gini's index thus showing for the first time, to the best of our knowledge, its application in DH, as an effective refocusing criterion. Demonstration is provided for different holographic configurations (i.e., lens and lensless apparatus) and for completely different objects (i.e., a thin pure phase microscopic object as an in vitro cell, and macroscopic puppets) preparation.

A criterion of orthogonality on the assumption and restrictions in subgrid-scale modelling of turbulence

Energy Technology Data Exchange (ETDEWEB)

Fang, L. [LMP, Ecole Centrale de Pékin, Beihang University, Beijing 100191 (China); Co-Innovation Center for Advanced Aero-Engine, Beihang University, Beijing 100191 (China); Sun, X.Y. [LMP, Ecole Centrale de Pékin, Beihang University, Beijing 100191 (China); Liu, Y.W., E-mail: liuyangwei@126.com [National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, School of Energy and Power Engineering, Beihang University, Beijing 100191 (China); Co-Innovation Center for Advanced Aero-Engine, Beihang University, Beijing 100191 (China)

2016-12-09

In order to shed light on understanding the subgrid-scale (SGS) modelling methodology, we analyze and define the concepts of assumption and restriction in the modelling procedure, then show by a generalized derivation that if there are multiple stationary restrictions in a modelling, the corresponding assumption function must satisfy a criterion of orthogonality. Numerical tests using one-dimensional nonlinear advection equation are performed to validate this criterion. This study is expected to inspire future research on generally guiding the SGS modelling methodology. - Highlights: • The concepts of assumption and restriction in the SGS modelling procedure are defined. • A criterion of orthogonality on the assumption and restrictions is derived. • Numerical tests using one-dimensional nonlinear advection equation are performed to validate this criterion.

Development of a brittle fracture acceptance criterion for the International Atomic Energy Agency (IAEA)

International Nuclear Information System (INIS)

Sorenson, K.B.; Salzbrenner, R.; Nickell, R.E.

1992-01-01

An effort has been undertaken to develop a brittle fracture acceptance criterion for structural components of nuclear material transportation casks. The need for such a criterion was twofold. First, new generation cask designs have proposed the use of ferritic steels and other materials to replace the austenitic stainless steel commonly used for structural components in transport casks. Unlike austenitic stainless steel which fails in a high-energy absorbing, ductile tearing mode, it is possible for these candidate materials to fail via brittle fracture when subjected to certain combinations of elevated loading rates and low temperatures. Second, there is no established brittle fracture criterion accepted by the regulatory community that covers a broad range of structural materials. Although the existing IAEA Safety Series number-sign 37 addressed brittle fracture, its the guidance was dated and pertained only to ferritic steels. Consultant's Services Meetings held under the auspices of the IAEA have resulted in a recommended brittle fracture criterion. The brittle fracture criterion is based on linear elastic fracture mechanics, and is the result of a consensus of experts from six participating IAEA-member countries. The brittle fracture criterion allows three approaches to determine the fracture toughness of the structural material. The three approaches present the opportunity to balance material testing requirements and the conservatism of the material's fracture toughness which must be used to demonstrate resistance to brittle fracture. This work has resulted in a revised Appendix IX to Safety Series number-sign 37 which will be released as an IAEA Technical Document within the coming year

Systems interaction and single failure criterion

International Nuclear Information System (INIS)

1981-01-01

This report documents the results of a six-month study to evaluate the ongoing research programs of the U.S. Nuclear Regulatory Commission (NRC) and U.S. commercial nuclear station owners which address the safety significance of systems interaction and the regulatory adequacy of the single failure criterion. The evaluation of system interactions provided is the initial phase of a more detailed study leading to the development and application of methodology for quantifying the relative safety of operating nuclear plants. (Auth.)

Generalized melting criterion for beam-induced amorphization

International Nuclear Information System (INIS)

Lam, N. Q.; Okamoto, Paul R.

1993-09-01

Recent studies have shown that the mean-square static atomic displacements provide a generic measure of the enthalpy stored in the lattice in the form of chemical and topological disorder, and that the effect of the displacements on the softening of shear elastic constants is identical to that of heating. This finding lends support to a generalized form of the Lindemann phenomenological melting criterion and leads to a natural interpretion of crystalline-to-amorphous transformations as defect-induced melting of metastable crystals driven beyond a critical state of disorder where the melting temperature falls below the glass-transition temperature. Application of the generalized Lindemann criterion to both the crystalline and amorphous phases indicates that the enthalpies of the two phases become identical when their shear moduli become equal. This thermo-elastic rule provides a basis for predicting the relative susceptibility of compounds to amorphization in terms of their elastic properties as measured by Debye temperatures. The present approach can explain many of the basic findings on beam-induced amorphization of intermetallic compounds as well as amorphous phase formation associated with ion implantation, ion-beam mixing and other solid-state processes

Short-Cut Estimators of Criterion-Referenced Test Consistency.

Science.gov (United States)

Brown, James Dean

1990-01-01

Presents simplified methods for deriving estimates of the consistency of criterion-referenced, English-as-a-Second-Language tests, including (1) the threshold loss agreement approach using agreement or kappa coefficients, (2) the squared-error loss agreement approach using the phi(lambda) dependability approach, and (3) the domain score…

A new criterion of photostimulated luminescence (PSL) method to detect irradiated traditional Chinese medicinal herbs

International Nuclear Information System (INIS)

Zhang, Liwen; Lin, Tong; Jiang, Yingqiao; Bi, Fujun

2013-01-01

This work used a new criterion to analyze 162 varieties (222 batches) of traditional Chinese medicinal herbs based on the European Standard EN 13751 (2009. Foodstuffs—Detection of Irradiated Food Using Photostimulated Luminescence. European Committee for Standardization, Brussels, Belgium). The characteristics of PSL signals are described, and a new criterion is established. Compared to EN 13751, the new criterion uses clearer definition to evaluate instead of the ambiguous descriptions in EN Standard, such as “much greater than” and “within the same order of magnitude”. Moreover, the accuracy of the new criterion is as good as or better than EN Standard in regard to classifying irradiated and non-irradiated traditional Chinese medicinal herbs. It can help to avoid false positive result when a non-irradiated herb got a screening PSL measurement above 5000 counts/60 s. This new criterion of photostimulated luminescence method can be applied to identify the irradiation status of traditional Chinese medicinal herbs, even if the medicinal herbs were irradiated at a low dose (0.3 kGy) or stored in the dark at room temperature for 24 months after the irradiation treatment. - Highlights: • Clearer evaluation criterion instead of the ambiguous descriptions in EN 13751. • Accuracy satisfied. • Large sample size provides outstanding representativeness. • Systematical evaluation on PSL method

Experiments and modeling of ballistic penetration using an energy failure criterion

Directory of Open Access Journals (Sweden)

Dolinski M.

2015-01-01

Full Text Available One of the most intricate problems in terminal ballistics is the physics underlying penetration and perforation. Several penetration modes are well identified, such as petalling, plugging, spall failure and fragmentation (Sedgwick, 1968. In most cases, the final target failure will combine those modes. Some of the failure modes can be due to brittle material behavior, but penetration of ductile targets by blunt projectiles, involving plugging in particular, is caused by excessive localized plasticity, with emphasis on adiabatic shear banding (ASB. Among the theories regarding the onset of ASB, new evidence was recently brought by Rittel et al. (2006, according to whom shear bands initiate as a result of dynamic recrystallization (DRX, a local softening mechanism driven by the stored energy of cold work. As such, ASB formation results from microstructural transformations, rather than from thermal softening. In our previous work (Dolinski et al., 2010, a failure criterion based on plastic strain energy density was presented and applied to model four different classical examples of dynamic failure involving ASB formation. According to this criterion, a material point starts to fail when the total plastic strain energy density reaches a critical value. Thereafter, the strength of the element decreases gradually to zero to mimic the actual material mechanical behavior. The goal of this paper is to present a new combined experimental-numerical study of ballistic penetration and perforation, using the above-mentioned failure criterion. Careful experiments are carried out using a single combination of AISI 4340 FSP projectiles and 25[mm] thick RHA steel plates, while the impact velocity, and hence the imparted damage, are systematically varied. We show that our failure model, which includes only one adjustable parameter in this present work, can faithfully reproduce each of the experiments without any further adjustment. Moreover, it is shown that the

Statistical criterion for Bubbly-slug flow transition

Energy Technology Data Exchange (ETDEWEB)

Zigler, J; Elias, E [Technion-Israel Inst. of Tech., Haifa (Israel). Dept. of Mechanical Engineering

1996-12-01

The investigation of flow pattern transitions is still an interesting problem in the research of multiphase Row. It has been studied theoretically, and experimental confirmation of the models has been found by many investigators. The present paper deals with a statistical approach to bubbly-slug transitions in a vertical upward two phase flow and a new transition criterion is deduced from experimental data (authors).

A new risk-based screening criterion for treatment-demanding retinopathy of prematurity in Denmark

DEFF Research Database (Denmark)

Slidsborg, Carina; Forman, Julie Lyng; Rasmussen, Steen Christian

2011-01-01

The aim of this study was to uncover the most effective and safe criterion to implement for retinopathy of prematurity screening in Denmark.......The aim of this study was to uncover the most effective and safe criterion to implement for retinopathy of prematurity screening in Denmark....

Energy-efficient induction motors designing with application of a modified criterion of reduced costs

Directory of Open Access Journals (Sweden)

V.S. Petrushin

2014-03-01

Full Text Available The paper introduces a modified criterion of reduced costs that employs coefficients of operation significance and priority of ohmic loss accounting to allow matching maximum efficiency with minimum reduced costs. Impact of the inflation factor on the criterion of reduced costs is analyzed.

Seismic stability analysis of rock slopes by yield design theory using the generalized Hoek-Brown criterion

Directory of Open Access Journals (Sweden)

Belghali Mounir

2018-01-01

Full Text Available The stability of rock slope is studied using the kinematic approach of yield design theory, under the condition of plane strain and by considering the last version of the Hoek-Brown failure criterion. This criterion, which is suitable to intact rock or rock mass highly fractured regarded as isotropic and homogeneous, is widely accepted by the rock mechanics community and has been applied in numerous projects around the world. The failure mechanism used to implement the kinematic approach is a log-spiral rotational mechanism. The stability analysis is carried out under the effects of gravity forces and a surcharge applied along the upper plateau of the slope. To take account of the effects of forces developed in the rock mass during the passage of a seismic wave, the conventional pseudo-static method is adopted. This method is often used in slope stability study for its simplicity and efficiency to simulate the seismic forces. The results found are compared with published numerical solutions obtained from other approaches. The comparison showed that the results are almost equal. The maximum error found is less than 1%, indicating that this approach is effective for analyzing the stability of rock slopes. The relevance of the approach demonstrated, investigations are undertaken to study the influence of some parameters on the stability of the slope. These parameters relate to the mechanical strength of the rock, slope geometry and loading.

Elaboration of generalized criterion for zonality determination of the Chernobyl' NPP working spaces

International Nuclear Information System (INIS)

Simakov, A.V.; Bad'in, V.I.; Nosovskij, A.V.

1992-01-01

Analysis of the features of radioactive dose rating, regularities of their formation and dosimetry allows suggesting generalized criterion for assess zonality of compartments and territories, combining all factors and their action on operators. This criterion may be used during design of the new objects, development of programs and pursuance of work on removal of atomic power plants from operation. 6 refs.; 1 fig

Synchronization criterion for Lur'e type complex dynamical networks with time-varying delay

International Nuclear Information System (INIS)

Ji, D.H.; Park, Ju H.; Yoo, W.J.; Won, S.C.; Lee, S.M.

2010-01-01

In this Letter, the synchronization problem for a class of complex dynamical networks in which every identical node is a Lur'e system with time-varying delay is considered. A delay-dependent synchronization criterion is derived for the synchronization of complex dynamical network that represented by Lur'e system with sector restricted nonlinearities. The derived criterion is a sufficient condition for absolute stability of error dynamics between the each nodes and the isolated node. Using a convex representation of the nonlinearity for error dynamics, the stability condition based on the discretized Lyapunov-Krasovskii functional is obtained via LMI formulation. The proposed delay-dependent synchronization criterion is less conservative than the existing ones. The effectiveness of our work is verified through numerical examples.

Contextuality in canonical systems of random variables

Science.gov (United States)

Dzhafarov, Ehtibar N.; Cervantes, Víctor H.; Kujala, Janne V.

2017-10-01

Random variables representing measurements, broadly understood to include any responses to any inputs, form a system in which each of them is uniquely identified by its content (that which it measures) and its context (the conditions under which it is recorded). Two random variables are jointly distributed if and only if they share a context. In a canonical representation of a system, all random variables are binary, and every content-sharing pair of random variables has a unique maximal coupling (the joint distribution imposed on them so that they coincide with maximal possible probability). The system is contextual if these maximal couplings are incompatible with the joint distributions of the context-sharing random variables. We propose to represent any system of measurements in a canonical form and to consider the system contextual if and only if its canonical representation is contextual. As an illustration, we establish a criterion for contextuality of the canonical system consisting of all dichotomizations of a single pair of content-sharing categorical random variables. This article is part of the themed issue `Second quantum revolution: foundational questions'.

Jeans' criterion and nonextensive velocity distribution function in kinetic theory

International Nuclear Information System (INIS)

Du Jiulin

2004-01-01

The effect of nonextensivity of self-gravitating systems on the Jeans' criterion for gravitational instability is studied in the framework of Tsallis statistics. The nonextensivity is introduced in the Jeans problem by a generalized q-nonextensive velocity distribution function through the equation of state of ideal gas in nonextensive kinetic theory. A new Jeans' criterion is deduced with a factor √(2/(5-3q)) that, however, differs from that one in [Astron. Astrophys. 396 (2002) 309] and new results of gravitational instability are analyzed for the nonextensive parameter q. An understanding of physical meaning of q and a possible seismic observation to find astronomical evidence for a value of q different from unity are also discussed

Establishment of an equivalence acceptance criterion for accelerated stability studies.

Science.gov (United States)

Burdick, Richard K; Sidor, Leslie

2013-01-01

In this article, the use of statistical equivalence testing for providing evidence of process comparability in an accelerated stability study is advocated over the use of a test of differences. The objective of such a study is to demonstrate comparability by showing that the stability profiles under nonrecommended storage conditions of two processes are equivalent. Because it is difficult at accelerated conditions to find a direct link to product specifications, and hence product safety and efficacy, an equivalence acceptance criterion is proposed that is based on the statistical concept of effect size. As with all statistical tests of equivalence, it is important to collect input from appropriate subject-matter experts when defining the acceptance criterion.

Earing Prediction in Cup Drawing using the BBC2008 Yield Criterion

Science.gov (United States)

Vrh, Marko; Halilovič, Miroslav; Starman, Bojan; Štok, Boris; Comsa, Dan-Sorin; Banabic, Dorel

2011-08-01

The paper deals with constitutive modelling of highly anisotropic sheet metals. It presents FEM based earing predictions in cup drawing simulation of highly anisotropic aluminium alloys where more than four ears occur. For that purpose the BBC2008 yield criterion, which is a plane-stress yield criterion formulated in the form of a finite series, is used. Thus defined criterion can be expanded to retain more or less terms, depending on the amount of given experimental data. In order to use the model in sheet metal forming simulations we have implemented it in a general purpose finite element code ABAQUS/Explicit via VUMAT subroutine, considering alternatively eight or sixteen parameters (8p and 16p version). For the integration of the constitutive model the explicit NICE (Next Increment Corrects Error) integration scheme has been used. Due to the scheme effectiveness the CPU time consumption for a simulation is comparable to the time consumption of built-in constitutive models. Two aluminium alloys, namely AA5042-H2 and AA2090-T3, have been used for a validation of the model. For both alloys the parameters of the BBC2008 model have been identified with a developed numerical procedure, based on a minimization of the developed cost function. For both materials, the predictions of the BBC2008 model prove to be in very good agreement with the experimental results. The flexibility and the accuracy of the model together with the identification and integration procedure guarantee the applicability of the BBC2008 yield criterion in industrial applications.

A simple criterion to predict the glass forming ability of metallic alloys

International Nuclear Information System (INIS)

Falcao de Oliveira, Marcelo

2012-01-01

A new and simple criterion with which to quantitatively predict the glass forming ability (GFA) of metallic alloys is proposed. It was found that the critical cooling rate for glass formation (R C ) correlates well with a proper combination of two factors, the minimum topological instability (λ min ) and the Δh parameter, which depends on the average work function difference (Δφ) and the average electron density difference (Δn ws 1/3 ) among the constituent elements of the alloy. A correlation coefficient (R 2 ) of 0.76 was found between R c and the new criterion for 68 alloys in 30 different metallic systems. The new criterion and the Uhlmann's approach were used to estimate the critical amorphous thickness (Z C ) of alloys in the Cu-Zr system. The new criterion underestimated R C in the Cu-Zr system, producing predicted Z C values larger than those observed experimentally. However, when considering a scale factor, a remarkable similarity was observed between the predicted and the experimental behavior of the GFA in the binary Cu-Zr. When using the same scale factor and performing the calculation for the ternary Zr-Cu-Al, good agreement was found between the predicted and the actual best GFA region, as well as between the expected and the observed critical amorphous thickness.

Specific strain work as a failure criterion in plane stress state

International Nuclear Information System (INIS)

Zuchowski, R.; Zietkowski, L.

1985-01-01

An experimental verification of failure criterion based on specific strain work was performed. Thin-walled cylindrical specimens were examined by loading with constant force and constant torque moment, assuming different values for particular tests, at the same time keeping stress intensity constant, and by subjecting to thermal cycling. It was found that the critical value of failure did not depend on axial-to-shearing stresses ratio, i.e., on the type of state of stress. Thereby, the validity of the analysed failure criterion in plane stress was confirmed. Besides, a simple description of damage development in plane stress was suggested. (orig./RF)

An analytic expression for the sheath criterion in magnetized plasmas with multi-charged ion species

International Nuclear Information System (INIS)

Hatami, M. M.

2015-01-01

The generalized Bohm criterion in magnetized multi-component plasmas consisting of multi-charged positive and negative ion species and electrons is analytically investigated by using the hydrodynamic model. It is assumed that the electrons and negative ion density distributions are the Boltzmann distribution with different temperatures and the positive ions enter into the sheath region obliquely. Our results show that the positive and negative ion temperatures, the orientation of the applied magnetic field and the charge number of positive and negative ions strongly affect the Bohm criterion in these multi-component plasmas. To determine the validity of our derived generalized Bohm criterion, it reduced to some familiar physical condition and it is shown that monotonically reduction of the positive ion density distribution leading to the sheath formation occurs only when entrance velocity of ion into the sheath satisfies the obtained Bohm criterion. Also, as a practical application of the obtained Bohm criterion, effects of the ionic temperature and concentration as well as magnetic field on the behavior of the charged particle density distributions and so the sheath thickness of a magnetized plasma consisting of electrons and singly charged positive and negative ion species are studied numerically

Integral criterion for selecting nonlinear crystals for frequency conversion

International Nuclear Information System (INIS)

Grechin, Sergei G

2009-01-01

An integral criterion, which takes into account all parameters determining the conversion efficiency, is offered for selecting nonlinear crystals for frequency conversion. The angular phase-matching width is shown to be related to the beam walk-off angle. (nonlinear optical phenomena)

Strain energy density-distance criterion for the initiation of stress corrosion cracking of alloy X-750

Energy Technology Data Exchange (ETDEWEB)

Hall, M.M. Jr.; Symons, D.M.

1996-05-01

A strain energy density-distance criterion was previously developed and used to correlate rising-load K{sub c} initiation data for notched and fatigue precracked specimens of hydrogen precharged Alloy X-750. This criterion, which was developed for hydrogen embrittlement (HE) cracking, is used here to correlate static-load stress corrosion cracking (SCC) initiation times obtained for smooth geometry, notched and fatigue precracked specimens. The onset of SCC crack growth is hypothesized to occur when a critical strain, which is due to environment-enhanced creep, is attained within the specimen interior. For notched and precracked specimens, initiation is shown by analysis to occur at a variable distance from notch and crack tips. The initiation site varies from very near the crack tip, for highly loaded sharp cracks, to a site that is one grain diameter from the notch, for lower loaded, blunt notches. The existence of hydrogen gradients, which are due to strain-induced hydrogen trapping in the strain fields of notch and crack tips, is argued to be controlling the site for initiation of cracking. By considering the sources of the hydrogen, these observations are shown to be consistent with those from the previous HE study, in which the characteristic distance for crack initiation was found to be one grain diameter from the notch tip, independent of notch radius, applied stress intensity factor and hydrogen level.

A New Multiaxial High-Cycle Fatigue Criterion Based on the Critical Plane for Ductile and Brittle Materials

Science.gov (United States)

Wang, Cong; Shang, De-Guang; Wang, Xiao-Wei

2015-02-01

An improved high-cycle multiaxial fatigue criterion based on the critical plane was proposed in this paper. The critical plane was defined as the plane of maximum shear stress (MSS) in the proposed multiaxial fatigue criterion, which is different from the traditional critical plane based on the MSS amplitude. The proposed criterion was extended as a fatigue life prediction model that can be applicable for ductile and brittle materials. The fatigue life prediction model based on the proposed high-cycle multiaxial fatigue criterion was validated with experimental results obtained from the test of 7075-T651 aluminum alloy and some references.

Optimal order and time-step criterion for Aarseth-type N-body integrators

International Nuclear Information System (INIS)

Makino, Junichiro

1991-01-01

How the selection of the time-step criterion and the order of the integrator change the efficiency of Aarseth-type N-body integrators is discussed. An alternative to Aarseth's scheme based on the direct calculation of the time derivative of the force using the Hermite interpolation is compared to Aarseth's scheme, which uses the Newton interpolation to construct the predictor and corrector. How the number of particles in the system changes the behavior of integrators is examined. The Hermite scheme allows a time step twice as large as that for the standard Aarseth scheme for the same accuracy. The calculation cost of the Hermite scheme per time step is roughly twice as much as that of the standard Aarseth scheme. The optimal order of the integrators depends on both the particle number and the accuracy required. The time-step criterion of the standard Aarseth scheme is found to be inapplicable to higher-order integrators, and a more uniformly reliable criterion is proposed. 18 refs

Is the Mercier criterion relevant to stellarator stability?

International Nuclear Information System (INIS)

Carreras, B.A.; Lynch, V.E.; Ichiguchi, K.; Wakatani, M.; Tatsuno, T.

2001-01-01

Local flattening of the pressure profile at the resonant surfaces may significantly change the stellarator stability properties. This flattening may be an intrinsic consequence of the three-dimensional nature of the equilibrium and may invalidate the local stability criteria often used in stellarator design. (author)

Job shop scheduling problem with late work criterion

Science.gov (United States)

Piroozfard, Hamed; Wong, Kuan Yew

2015-05-01

Scheduling is considered as a key task in many industries, such as project based scheduling, crew scheduling, flight scheduling, machine scheduling, etc. In the machine scheduling area, the job shop scheduling problems are considered to be important and highly complex, in which they are characterized as NP-hard. The job shop scheduling problems with late work criterion and non-preemptive jobs are addressed in this paper. Late work criterion is a fairly new objective function. It is a qualitative measure and concerns with late parts of the jobs, unlike classical objective functions that are quantitative measures. In this work, simulated annealing was presented to solve the scheduling problem. In addition, operation based representation was used to encode the solution, and a neighbourhood search structure was employed to search for the new solutions. The case studies are Lawrence instances that were taken from the Operations Research Library. Computational results of this probabilistic meta-heuristic algorithm were compared with a conventional genetic algorithm, and a conclusion was made based on the algorithm and problem.

Logical and Decisive Combining Criterion for Binary Group Decision Making

Directory of Open Access Journals (Sweden)

Ivan Vrana

2010-04-01

Full Text Available A new combining criterion, the Multiplicative Proportional Deviative Influence (MPDI is presented for combining or aggregating multi-expert numerical judgments in Yes-or-No type ill-structured group decision making situations. This newly proposed criterion performs well in comparison with the widely used aggregation means: the Arithmetic Mean (AM, and Geometric Mean (GM, especially in better reflecting the degree of agreement between criteria levels or numerical experts’ judgments. The MPDI can be considered as another class of combining criteria that make effect of the degree of agreement among multiple numerical judgments. The MPDI is applicable in integrating several collaborative or synergistic decision making systems through combining final numerical decision outputs. A discussion and generalization of the proposed MPDI is discussed withnumerical example.

Mass spectrometric confirmation criterion for product-ion spectra generated in flow-injection analysis. Environmental application

NARCIS (Netherlands)

Geerdink, R.B.; Niessen, W.M.A.; Brinkman, U.A.T.

2001-01-01

The suitability of a confirmation criterion recently recommended in the Netherlands for gas chromatography with mass spectrometric detection (GC-MS), was evaluated for flow-injection analysis (FIA) with atmospheric pressure chemical ionisation MS-MS detection. The main feature of the criterion is

Multi-Criterion Two-Sided Matching of Public–Private Partnership Infrastructure Projects: Criteria and Methods

Directory of Open Access Journals (Sweden)

Ru Liang

2018-04-01

Full Text Available Two kinds of evaluative criteria are associated with Public–Private Partnership (PPP infrastructure projects, i.e., private evaluative criteria and public evaluative criteria. These evaluative criteria are inversely related, that is, the higher the public benefits; the lower the private surplus. To balance evaluative criteria in the Two-Sided Matching (TSM decision, this paper develops a quantitative matching decision model to select an optimal matching scheme for PPP infrastructure projects based on the Hesitant Fuzzy Set (HFS under unknown evaluative criterion weights. In the model, HFS is introduced to describe values of the evaluative criteria and multi-criterion information is fully considered given by groups. The optimal model is built and solved by maximizing the whole deviation of each criterion so that the evaluative criterion weights are determined objectively. Then, the match-degree of the two sides is calculated and a multi-objective optimization model is introduced to select an optimal matching scheme via a min-max approach. The results provide new insights and implications of the influence on evaluative criteria in the TSM decision.

Entanglement in SU(2)-invariant quantum systems: The positive partial transpose criterion and others

International Nuclear Information System (INIS)

Schliemann, John

2005-01-01

We study entanglement in mixed bipartite quantum states which are invariant under simultaneous SU(2) transformations in both subsystems. Previous results on the behavior of such states under partial transposition are substantially extended. The spectrum of the partial transpose of a given SU(2)-invariant density matrix ρ is entirely determined by the diagonal elements of ρ in a basis of tensor-product states of both spins with respect to a common quantization axis. We construct a set of operators which act as entanglement witnesses on SU(2)-invariant states. A sufficient criterion for ρ having a negative partial transpose is derived in terms of a simple spin correlator. The same condition is a necessary criterion for the partial transpose to have the maximum number of negative eigenvalues. Moreover, we derive a series of sum rules which uniquely determine the eigenvalues of the partial transpose in terms of a system of linear equations. Finally we compare our findings with other entanglement criteria including the reduction criterion, the majorization criterion, and the recently proposed local uncertainty relations

Statistical surrogate model based sampling criterion for stochastic global optimization of problems with constraints

Energy Technology Data Exchange (ETDEWEB)

Cho, Su Gil; Jang, Jun Yong; Kim, Ji Hoon; Lee, Tae Hee [Hanyang University, Seoul (Korea, Republic of); Lee, Min Uk [Romax Technology Ltd., Seoul (Korea, Republic of); Choi, Jong Su; Hong, Sup [Korea Research Institute of Ships and Ocean Engineering, Daejeon (Korea, Republic of)

2015-04-15

Sequential surrogate model-based global optimization algorithms, such as super-EGO, have been developed to increase the efficiency of commonly used global optimization technique as well as to ensure the accuracy of optimization. However, earlier studies have drawbacks because there are three phases in the optimization loop and empirical parameters. We propose a united sampling criterion to simplify the algorithm and to achieve the global optimum of problems with constraints without any empirical parameters. It is able to select the points located in a feasible region with high model uncertainty as well as the points along the boundary of constraint at the lowest objective value. The mean squared error determines which criterion is more dominant among the infill sampling criterion and boundary sampling criterion. Also, the method guarantees the accuracy of the surrogate model because the sample points are not located within extremely small regions like super-EGO. The performance of the proposed method, such as the solvability of a problem, convergence properties, and efficiency, are validated through nonlinear numerical examples with disconnected feasible regions.

Soft Sensing of Key State Variables in Fermentation Process Based on Relevance Vector Machine with Hybrid Kernel Function

Directory of Open Access Journals (Sweden)

Xianglin ZHU

2014-06-01

Full Text Available To resolve the online detection difficulty of some important state variables in fermentation process with traditional instruments, a soft sensing modeling method based on relevance vector machine (RVM with a hybrid kernel function is presented. Based on the characteristic analysis of two commonly-used kernel functions, that is, local Gaussian kernel function and global polynomial kernel function, a hybrid kernel function combing merits of Gaussian kernel function and polynomial kernel function is constructed. To design optimal parameters of this kernel function, the particle swarm optimization (PSO algorithm is applied. The proposed modeling method is used to predict the value of cell concentration in the Lysine fermentation process. Simulation results show that the presented hybrid-kernel RVM model has a better accuracy and performance than the single kernel RVM model.

Generalized statistical criterion for distinguishing random optical groupings from physical multiple systems

International Nuclear Information System (INIS)

Anosova, Z.P.

1988-01-01

A statistical criterion is proposed for distinguishing between random and physical groupings of stars and galaxies. The criterion is applied to nearby wide multiple stars, triplets of galaxies in the list of Karachentsev, Karachentseva, and Shcherbanovskii, and double galaxies in the list of Dahari, in which the principal components are Seyfert galaxies. Systems that are almost certainly physical, probably physical, probably optical, and almost certainly optical are identified. The limiting difference between the radial velocities of the components of physical multiple galaxies is estimated

Differentiation between Superficial and Deep Lobe Parotid Tumors by Magnetic Resonance Imaging: Usefulness of the Parotid Duct Criterion

Energy Technology Data Exchange (ETDEWEB)

Imaizumi, A.; Kuribayashi, A.; Okochi, K.; Yoshino, N.; Kurabayashi, T. (Oral and Maxillofacial Radiology, Graduate School, Tokyo Medical and Dental Univ., Tokyo (Japan)); Ishii, J. (Maxillofacial Surgery, Graduate School, Tokyo Medical and Dental Univ., Tokyo (Japan)); Sumi, Y. (Division of Oral and Dental Surgery, Dept. of Advanced Medicine, National Center for Geriatrics and Gerontology, Aichi (Japan))

2009-08-15

Background: The location of a parotid tumor affects the choice of surgery, and there is a risk of damaging the facial nerve during surgery. Thus, differentiation between superficial and deep lobe parotid tumors is important for appropriate surgical planning. Purpose: To evaluate the usefulness of using the parotid duct, in addition to the retromandibular vein, for differentiating between superficial and deep lobe parotid tumors on MR images. Material and Methods: Magnetic resonance images of 42 parotid tumors in 40 patients were reviewed to determine whether the tumor was located in the superficial or deep lobe. In each case, the retromandibular vein and the parotid duct were used to locate the tumor. The parotid duct was only used in cases where the tumor and the duct were visualized on the same image. Results: Using the retromandibular vein criterion, 71% of deep lobe and 86% of superficial lobe tumors were correctly diagnosed, providing an accuracy of 81%. However, the accuracy achieved when using the parotid duct criterion was 100%, although it could be applied to only 28 of the 42 cases. Based on these results, we defined the following diagnostic method: the parotid duct criterion is first applied, and for cases in which it cannot be applied, the retromandibular vein criterion is used. The accuracy of this method was 88%, which was better than that achieved using the retromandibular vein criterion alone. Conclusion: The parotid duct criterion is useful for determining the location of parotid tumors. Combining the parotid duct criterion with the retromandibular vein criterion might improve the diagnostic accuracy of parotid tumor location compared to using the latter criterion alone

Differentiation between Superficial and Deep Lobe Parotid Tumors by Magnetic Resonance Imaging: Usefulness of the Parotid Duct Criterion

International Nuclear Information System (INIS)

Imaizumi, A.; Kuribayashi, A.; Okochi, K.; Yoshino, N.; Kurabayashi, T.; Ishii, J.; Sumi, Y.

2009-01-01

Background: The location of a parotid tumor affects the choice of surgery, and there is a risk of damaging the facial nerve during surgery. Thus, differentiation between superficial and deep lobe parotid tumors is important for appropriate surgical planning. Purpose: To evaluate the usefulness of using the parotid duct, in addition to the retromandibular vein, for differentiating between superficial and deep lobe parotid tumors on MR images. Material and Methods: Magnetic resonance images of 42 parotid tumors in 40 patients were reviewed to determine whether the tumor was located in the superficial or deep lobe. In each case, the retromandibular vein and the parotid duct were used to locate the tumor. The parotid duct was only used in cases where the tumor and the duct were visualized on the same image. Results: Using the retromandibular vein criterion, 71% of deep lobe and 86% of superficial lobe tumors were correctly diagnosed, providing an accuracy of 81%. However, the accuracy achieved when using the parotid duct criterion was 100%, although it could be applied to only 28 of the 42 cases. Based on these results, we defined the following diagnostic method: the parotid duct criterion is first applied, and for cases in which it cannot be applied, the retromandibular vein criterion is used. The accuracy of this method was 88%, which was better than that achieved using the retromandibular vein criterion alone. Conclusion: The parotid duct criterion is useful for determining the location of parotid tumors. Combining the parotid duct criterion with the retromandibular vein criterion might improve the diagnostic accuracy of parotid tumor location compared to using the latter criterion alone

Functional Quality Criterion of Rock Handling Mechanization at Open-pit Mines

Directory of Open Access Journals (Sweden)

Voronov Yuri

2017-01-01

Full Text Available Overburden and mining operations at open-pit mines are performed mainly by powerful shovel-truck systems (STSs. One of the main problems of the STSs is a rather low level of their operating quality, mainly due to unjustified over-trucking. In this article, a functional criterion for assessing the qualify of the STS operation at open-pit mines is formulated, derived and analyzed. We introduce the rationale and general principles for the functional criterion formation, its general form, as well as variations for various STS structures: a mixed truck fleet and a homogeneous shovel fleet, a mixed shove! fleet and a homogeneous truck fleet, mixed truck and shovel fleets. The possibility of assessing the quality of the STS operation is of great importance for identifying the main directions for improving their operational performance and operating quality, optimizing the main performance indicators by the qualify criterion, and. as a result, for possible saving of material and technical resources for open-pit mining. Improvement of the quality of the STS operation also allows increasing the mining safety and decreasing the atmosphere pollution - by means of possible reducing of the number of the operating trucks.

Functional Quality Criterion of Rock Handling Mechanization at Open-pit Mines

Science.gov (United States)

Voronov, Yuri; Voronov, Artyoni

2017-11-01

Overburden and mining operations at open-pit mines are performed mainly by powerful shovel-truck systems (STSs). One of the main problems of the STSs is a rather low level of their operating quality, mainly due to unjustified over-trucking. In this article, a functional criterion for assessing the qualify of the STS operation at open-pit mines is formulated, derived and analyzed. We introduce the rationale and general principles for the functional criterion formation, its general form, as well as variations for various STS structures: a mixed truck fleet and a homogeneous shovel fleet, a mixed shove! fleet and a homogeneous truck fleet, mixed truck and shovel fleets. The possibility of assessing the quality of the STS operation is of great importance for identifying the main directions for improving their operational performance and operating quality, optimizing the main performance indicators by the qualify criterion, and. as a result, for possible saving of material and technical resources for open-pit mining. Improvement of the quality of the STS operation also allows increasing the mining safety and decreasing the atmosphere pollution - by means of possible reducing of the number of the operating trucks.

A complete graphical criterion for the adjustment formula in mediation analysis.

Science.gov (United States)

Shpitser, Ilya; VanderWeele, Tyler J

2011-03-04

Various assumptions have been used in the literature to identify natural direct and indirect effects in mediation analysis. These effects are of interest because they allow for effect decomposition of a total effect into a direct and indirect effect even in the presence of interactions or non-linear models. In this paper, we consider the relation and interpretation of various identification assumptions in terms of causal diagrams interpreted as a set of non-parametric structural equations. We show that for such causal diagrams, two sets of assumptions for identification that have been described in the literature are in fact equivalent in the sense that if either set of assumptions holds for all models inducing a particular causal diagram, then the other set of assumptions will also hold for all models inducing that diagram. We moreover build on prior work concerning a complete graphical identification criterion for covariate adjustment for total effects to provide a complete graphical criterion for using covariate adjustment to identify natural direct and indirect effects. Finally, we show that this criterion is equivalent to the two sets of independence assumptions used previously for mediation analysis.

The New DSM-5 Impairment Criterion: A Challenge to Early Autism Spectrum Disorder Diagnosis?

Science.gov (United States)

Zander, Eric; Bölte, Sven

2015-01-01

The possible effect of the DSM-5 impairment criterion on diagnosing autism spectrum disorder (ASD) in young children was examined in 127 children aged 20-47 months with a DSM-IV-TR clinical consensus diagnosis of ASD. The composite score of the Vineland Adaptive Behavior Scales (VABS) served as a proxy for the DSM-5 impairment criterion. When…

Local Thermodynamic Equilibrium in Laser-Induced Breakdown Spectroscopy: Beyond the McWhirter criterion

International Nuclear Information System (INIS)

Cristoforetti, G.; De Giacomo, A.; Dell'Aglio, M.; Legnaioli, S.; Tognoni, E.; Palleschi, V.; Omenetto, N.

2010-01-01

In the Laser-Induced Breakdown Spectroscopy (LIBS) technique, the existence of Local Thermodynamic Equilibrium (LTE) is the essential requisite for meaningful application of theoretical Boltzmann-Maxwell and Saha-Eggert expressions that relate fundamental plasma parameters and concentration of analyte species. The most popular criterion reported in the literature dealing with plasma diagnostics, and usually invoked as a proof of the existence of LTE in the plasma, is the McWhirter criterion [R.W.P. McWhirter, in: Eds. R.H. Huddlestone, S.L. Leonard, Plasma Diagnostic Techniques, Academic Press, New York, 1965, pp. 201-264]. However, as pointed out in several papers, this criterion is known to be a necessary but not a sufficient condition to insure LTE. The considerations reported here are meant to briefly review the theoretical analysis underlying the concept of thermodynamic equilibrium and the derivation of the McWhirter criterion, and to critically discuss its application to a transient and non-homogeneous plasma, like that created by a laser pulse on solid targets. Specific examples are given of theoretical expressions involving relaxation times and diffusion coefficients, as well as a discussion of different experimental approaches involving space and time-resolved measurements that could be used to complement a positive result of the calculation of the minimum electron number density required for LTE using the McWhirter formula. It is argued that these approaches will allow a more complete assessment of the existence of LTE and therefore permit a better quantitative result. It is suggested that the mere use of the McWhirter criterion to assess the existence of LTE in laser-induced plasmas should be discontinued.

Multidimensional adaptive testing with a minimum error-variance criterion

NARCIS (Netherlands)

van der Linden, Willem J.

1997-01-01

The case of adaptive testing under a multidimensional logistic response model is addressed. An adaptive algorithm is proposed that minimizes the (asymptotic) variance of the maximum-likelihood (ML) estimator of a linear combination of abilities of interest. The item selection criterion is a simple

A Criterion-Referenced Approach to Student Ratings of Instruction

Science.gov (United States)

Meyer, J. Patrick; Doromal, Justin B.; Wei, Xiaoxin; Zhu, Shi

2017-01-01

We developed a criterion-referenced student rating of instruction (SRI) to facilitate formative assessment of teaching. It involves four dimensions of teaching quality that are grounded in current instructional design principles: Organization and structure, Assessment and feedback, Personal interactions, and Academic rigor. Using item response…

Bayesian Information Criterion as an Alternative way of Statistical Inference

Directory of Open Access Journals (Sweden)

Nadejda Yu. Gubanova

2012-05-01

Full Text Available The article treats Bayesian information criterion as an alternative to traditional methods of statistical inference, based on NHST. The comparison of ANOVA and BIC results for psychological experiment is discussed.

Using ERA-Interim reanalysis for creating datasets of energy-relevant climate variables

Science.gov (United States)

Jones, Philip D.; Harpham, Colin; Troccoli, Alberto; Gschwind, Benoit; Ranchin, Thierry; Wald, Lucien; Goodess, Clare M.; Dorling, Stephen

2017-07-01

The construction of a bias-adjusted dataset of climate variables at the near surface using ERA-Interim reanalysis is presented. A number of different, variable-dependent, bias-adjustment approaches have been proposed. Here we modify the parameters of different distributions (depending on the variable), adjusting ERA-Interim based on gridded station or direct station observations. The variables are air temperature, dewpoint temperature, precipitation (daily only), solar radiation, wind speed, and relative humidity. These are available on either 3 or 6 h timescales over the period 1979-2016. The resulting bias-adjusted dataset is available through the Climate Data Store (CDS) of the Copernicus Climate Change Data Store (C3S) and can be accessed at present from climate.copernicus.eu" target="_blank">ftp://ecem.climate.copernicus.eu. The benefit of performing bias adjustment is demonstrated by comparing initial and bias-adjusted ERA-Interim data against gridded observational fields.

An Elementary Proof of a Criterion for Linear Disjointness

Science.gov (United States)

Dobbs, David E.

2013-01-01

An elementary proof using matrix theory is given for the following criterion: if "F"/"K" and "L"/"K" are field extensions, with "F" and "L" both contained in a common extension field, then "F" and "L" are linearly disjoint over "K" if (and only if) some…

AUTOMATIC RECOGNITION OF FALLS IN GAIT-SLIP: A HARNESS LOAD CELL BASED CRITERION

OpenAIRE

Yang, Feng; Pai, Yi-Chung

2011-01-01

Over-head-harness systems, equipped with load cell sensors, are essential to the participants’ safety and to the outcome assessment in perturbation training. The purpose of this study was to first develop an automatic outcome recognition criterion among young adults for gait-slip training and then verify such criterion among older adults. Each of 39 young and 71 older subjects, all protected by safety harness, experienced 8 unannounced, repeated slips, while walking on a 7-m walkway. Each tri...

A new repair criterion for steam generator tubes with axial cracks based on probabilistic integrity assessment

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun-Su; Oh, Chang-Kyun [KEPCO Engineering and Construction Company, Inc., 269, Hyeoksin-ro, Gimcheon, Gyeongsangbuk-do 39660 (Korea, Republic of); Chang, Yoon-Suk, E-mail: yschang@khu.ac.kr [Department of Nuclear Engineering, College of Engineering, Kyung Hee University, 1732 Deokyoungdaero, Giheung, Yongin, Gyeonggi 446-701 (Korea, Republic of)

2017-03-15

Highlights: • Probabilistic assessment was performed for axially cracked steam generator tubes. • The threshold crack sizes were determined based on burst pressures of the tubes. • A new repair criterion was suggested as a function of operation time. - Abstract: Steam generator is one of the major components in a nuclear power plant, and it consists of thousands of thin-walled tubes. The operating record of the steam generators has indicated that a number of axial cracks due to stress corrosion have been frequently detected in the tubes. Since the tubes are closely related to the safety and also the efficiency of a nuclear power plant, an establishment of the appropriate repair criterion for the defected tubes and its applications are necessary. The objective of this paper is to develop an accurate repair criterion for the tubes with axial cracks. To do this, a thorough review is performed on the key parameters affecting the tube integrity, and then the probabilistic integrity assessment is carried out by considering the various uncertainties. In addition, the sizes of critical crack are determined by comparing the burst pressure of the cracked tube with the required performance criterion. Based on this result, the new repair criterion for the axially cracked tubes is defined from the reasonably conservative value such that the required performance criterion in terms of the burst pressure is able to be met during the next operating period.

Ductile Crack Initiation Criterion with Mismatched Weld Joints Under Dynamic Loading Conditions.

Science.gov (United States)

An, Gyubaek; Jeong, Se-Min; Park, Jeongung

2018-03-01

Brittle failure of high toughness steel structures tends to occur after ductile crack initiation/propagation. Damages to steel structures were reported in the Hanshin Great Earthquake. Several brittle failures were observed in beam-to-column connection zones with geometrical discontinuity. It is widely known that triaxial stresses accelerate the ductile fracture of steels. The study examined the effects of geometrical heterogeneity and strength mismatches (both of which elevate plastic constraints due to heterogeneous plastic straining) and loading rate on critical conditions initiating ductile fracture. This involved applying the two-parameter criterion (involving equivalent plastic strain and stress triaxiality) to estimate ductile cracking for strength mismatched specimens under static and dynamic tensile loading conditions. Ductile crack initiation testing was conducted under static and dynamic loading conditions using circumferentially notched specimens (Charpy type) with/without strength mismatches. The results indicated that the condition for ductile crack initiation using the two parameter criterion was a transferable criterion to evaluate ductile crack initiation independent of the existence of strength mismatches and loading rates.

Direct numerical simulations of non-premixed ethylene-air flames: Local flame extinction criterion

KAUST Repository

Lecoustre, Vivien R.

2014-11-01

Direct Numerical Simulations (DNS) of ethylene/air diffusion flame extinctions in decaying two-dimensional turbulence were performed. A Damköhler-number-based flame extinction criterion as provided by classical large activation energy asymptotic (AEA) theory is assessed for its validity in predicting flame extinction and compared to one based on Chemical Explosive Mode Analysis (CEMA) of the detailed chemistry. The DNS code solves compressible flow conservation equations using high order finite difference and explicit time integration schemes. The ethylene/air chemistry is simulated with a reduced mechanism that is generated based on the directed relation graph (DRG) based methods along with stiffness removal. The numerical configuration is an ethylene fuel strip embedded in ambient air and exposed to a prescribed decaying turbulent flow field. The emphasis of this study is on the several flame extinction events observed in contrived parametric simulations. A modified viscosity and changing pressure (MVCP) scheme was adopted in order to artificially manipulate the probability of flame extinction. Using MVCP, pressure was changed from the baseline case of 1 atm to 0.1 and 10 atm. In the high pressure MVCP case, the simulated flame is extinction-free, whereas in the low pressure MVCP case, the simulated flame features frequent extinction events and is close to global extinction. Results show that, despite its relative simplicity and provided that the global flame activation temperature is correctly calibrated, the AEA-based flame extinction criterion can accurately predict the simulated flame extinction events. It is also found that the AEA-based criterion provides predictions of flame extinction that are consistent with those provided by a CEMA-based criterion. This study supports the validity of a simple Damköhler-number-based criterion to predict flame extinction in engineering-level CFD models. © 2014 The Combustion Institute.

Genetic Variability of Show Jumping Attributes in Young Horses Commencing Competing

Directory of Open Access Journals (Sweden)

Tomasz Próchniak

2015-08-01

Full Text Available The aim of the study was to select traits that may constitute a prospective criterion for breeding value prediction of young horses. The results of 1,232 starts of 894 four-, five-, six-, and seven-year-old horses, obtained during jumping championships for young horses which had not been evaluated in, alternative to championships, training centres were analyed. Nine traits were chosen of those recorded: ranking in the championship, elimination (y/n, conformation, rating of style on day one, two, and three, and penalty points on day one, two, and three of a championship. (Covariance components were estimated via the Gibbs sampling procedure and adequate (covariance component ratios were calculated. Statistical classifications were trait dependent but all fitted random additive genetic and permanent environment effects. It was found that such characteristics as penalty points and jumping style are potential indicators of jumping ability, and the genetic variability of the traits was within the range of 14% to 27%. Given the low genetic correlations between the conformation and other results achieved on the parkour, the relevance of assessment of conformation in four-years-old horses has been questioned.

Criterion III: Maintenance of rangeland productive capacity [Chapter 4

Science.gov (United States)

G. R. Evans; R. A. Washmgton-Allen; R. D. Child; J. E. Mitchell; B. R. Bobowskl; R. V. Loper; B. H. Allen-Diaz; D. W. Thompson; G. R. Welling; T. B. Reuwsaat

2010-01-01

Maintenance of rangeland productive capacity is one of five criteria established by the Sustainable Rangelands Roundtable (SRR) to monitor and assess rangeland sustainable management. Within this criterion, six indicators were developed through the Delphi Process and the expert opinions of academicians, rangeland scientists, rangeland management agency personnel, non-...

A comparative calculation of the wind turbines capacities on the basis of the L-{sigma} criterion

Energy Technology Data Exchange (ETDEWEB)

Menet, Jean-Luc; Valdes, Laurent-Charles; Menart, Bruno [Universite de Valenciennes et du Hainaut-Cambresis, Groupe de Recherche Energies et Environnement, Valenciennes, 59 (France)

2001-04-01

Usually, wind sites are equipped with fast-running Horizontal Axis Wind Turbines of the airscrew type, which has a high efficiency. In this article, the argument is put forward that the choice of a wind turbine must not be based only on high efficiency. We propose a comparative criterion adapted to the comparison of a horizontal axis wind turbine with a vertical axis wind turbine: the L-{sigma} criterion. This criterion consists in comparing wind turbines which intercept the same front width of wind, by allocating them a same reference value of the maximal mechanical stress on the blades or the paddles. On the basis of this criterion, a quantitative comparison points to a clear advantage of the Savonius rotors, because of their lower angular velocity, and provides some elements for the improvement of their rotor. (Author)

Perceived Relevance of an Introductory Information Systems Course to Prospective Business Students

Directory of Open Access Journals (Sweden)

Irene Govender

2013-12-01

Full Text Available The study is designed to examine students’ perceptions of the introductory Information Systems (IS course. It was an exploratory study in which 67 students participated. A quantitative approach was followed making use of questionnaires for the collection of data. Using the theory of reasoned action as a framework, the study explores the factors that influence non-IS major students’ perceived relevance of the IS introductory course. The analysis of collected data included descriptive and inferential statistics. Using multiple regression analysis, the results suggest that overall, the independent variables, relevance of the content, previous IT knowledge, relevance for professional practice, IT preference in courses and peers’ influence may account for 72% of the explanatory power for the dependent variable, perceived relevance of the IS course. In addition, the results have shown some strong predictors (IT preference and peers’ influence that influence students’ perceived relevance of the IS course. Practical work was found to be a strong mediating variable toward positive perceptions of IS. The results of this study suggest that students do indeed perceive the introductory IS course to be relevant and match their professional needs, but more practical work would enhance their learning. Implications for theory and practice are discussed as a result of the behavioural intention to perceive the IS course to be relevant and eventually to recruit more IS students.

Stability Criterion for a Finned Spinning Projectile

OpenAIRE

S. D. Naik

2000-01-01

The state-of-the-art in gun projectile technology has been used for the aerodynamic stabilisation.This approach is acceptable for guided and controlled rockets but the free-flight rockets suffer fromunacceptable dispersion. Sabot projectiles with both spin and fms developed during the last decadeneed careful analysis. In this study, the second method of Liapunov has been used to develop stability criterion for a projectile to be designed with small fins and is made to spin in the flight. This...

The Goiania accident: release from hospital criterion

International Nuclear Information System (INIS)

Falcao, R.C.; Hunt, J.

1990-01-01

On the thirteenth of September 1987, a 1357 Ci Cesium source was removed from the 'Instituto de Radiologia de Goiania' - probably two or three days later the source was opened, causing the internal and external contamination of 247 people, and part of the city of Goiania. This paper describes the release from hospital criterion of the contaminated patients, based on radiation protection principles which were developed for this case. The estimate of the biological half-life for cesium is also described. (author) [pt

Combining epidemiologic and biostatistical tools to enhance variable selection in HIV cohort analyses.

Directory of Open Access Journals (Sweden)

Christopher Rentsch

Full Text Available BACKGROUND: Variable selection is an important step in building a multivariate regression model for which several methods and statistical packages are available. A comprehensive approach for variable selection in complex multivariate regression analyses within HIV cohorts is explored by utilizing both epidemiological and biostatistical procedures. METHODS: Three different methods for variable selection were illustrated in a study comparing survival time between subjects in the Department of Defense's National History Study and the Atlanta Veterans Affairs Medical Center's HIV Atlanta VA Cohort Study. The first two methods were stepwise selection procedures, based either on significance tests (Score test, or on information theory (Akaike Information Criterion, while the third method employed a Bayesian argument (Bayesian Model Averaging. RESULTS: All three methods resulted in a similar parsimonious survival model. Three of the covariates previously used in the multivariate model were not included in the final model suggested by the three approaches. When comparing the parsimonious model to the previously published model, there was evidence of less variance in the main survival estimates. CONCLUSIONS: The variable selection approaches considered in this study allowed building a model based on significance tests, on an information criterion, and on averaging models using their posterior probabilities. A parsimonious model that balanced these three approaches was found to provide a better fit than the previously reported model.

Signal Detection with Criterion Noise: Applications to Recognition Memory

Science.gov (United States)

Benjamin, Aaron S.; Diaz, Michael; Wee, Serena

2009-01-01

A tacit but fundamental assumption of the theory of signal detection is that criterion placement is a noise-free process. This article challenges that assumption on theoretical and empirical grounds and presents the noisy decision theory of signal detection (ND-TSD). Generalized equations for the isosensitivity function and for measures of…

Valence electron structure of cast iron and graphltization behaviour criterion of elements

Institute of Scientific and Technical Information of China (English)

刘志林; 李志林; 孙振国; 杨晓平; 陈敏

1995-01-01

The valence electron structure of common alloy elements in phases of cast iron is calculated- The relationship between the electron structure of alloy elements and equilibrium, non-equilibrium solidification and graphitization is revealed by defining the bond energy of the strongest bond in a phase as structure formation factor S. A criterion of graphitization behaviour of elements is advanced with the critical value of the structure formation factor of graphite and the n of the strongest covalent bond in cementite. It is found that this theory conforms to practice very well when the criterion is applied to the common alloy elements.

Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion

Science.gov (United States)

Park, N.; Huh, H.; Yoon, J. W.

2017-09-01

This paper deals with the prediction of fracture initiation in square cup drawing of DP980 steel sheet with the thickness of 1.2 mm. In an attempt to consider the influence of material anisotropy on the fracture initiation, an uncoupled anisotropic ductile fracture criterion is developed based on the Lou—Huh ductile fracture criterion. Tensile tests are carried out at different loading directions of 0°, 45°, and 90° to the rolling direction of the sheet using various specimen geometries including pure shear, dog-bone, and flat grooved specimens so as to calibrate the parameters of the proposed fracture criterion. Equivalent plastic strain distribution on the specimen surface is computed using Digital Image Correlation (DIC) method until surface crack initiates. The proposed fracture criterion is implemented into the commercial finite element code ABAQUS/Explicit by developing the Vectorized User-defined MATerial (VUMAT) subroutine which features the non-associated flow rule. Simulation results of the square cup drawing test clearly show that the proposed fracture criterion is capable of predicting the fracture initiation with sufficient accuracy considering the material anisotropy.

Functional ability of community dwelling elderly. Criterion-related validity of a new measure of functional ability

DEFF Research Database (Denmark)

Schultz-Larsen, K; Avlund, K; Kreiner, S

1992-01-01

Criterion-related validity of a new measure of functional ability was conducted according to a causal model based on conceptual models employed in the area of rehabilitative and geriatric medicine. The criteria variables included concurrent diagnosed diseases, global self-rated health, drug...... consumption and general practitioner (GP) consultations. The measure of functional ability was developed with the intention of achieving a high degree of discrimination among a group of community dwelling elderly. Data were derived from a sample survey of 70-year-old men and women conducted in 1984...... different unidimensional index scales of functional ability divided into two types, with reduced speed and tiredness as subdimensions. The two scale types were mobility function and lower limb function. Early losses of ability together with global self-rated health were treated as outcome measures...

Definition of the generalized criterion of estimation of ecological purity of textile products

International Nuclear Information System (INIS)

Gintibidze, N.; Valishvili, T.

2009-01-01

One of actual problems is the estimation of hygienic and ecological properties of fabrics on the basis of the data on the properties of initial fiber. In the present article, the definition of generalized criterion of the estimation of ecological purity of textile products is discussed. The estimation is based on the International Standard EKO-TEX-100, regulating the contents of inorganic and organic compounds in textile production. The determination of all listed substances is made according to appropriate techniques for each parameter. The quantity of substances is determined and compared with norms. The judgement about ecological purity is made by separate parameters. There is no uniform parameter which could estimate the degree of ecological purity of textile products. For calculating the generalized criterion of estimation of ecological purity of textile products, it is offered to estimate each criterion by the points corresponding to each factor. The textile product is recognized as ecologically pure (environment friendly) if the total estimate is more than 1. (author)

A graphical criterion for working fluid selection and thermodynamic system comparison in waste heat recovery

International Nuclear Information System (INIS)

Xi, Huan; Li, Ming-Jia; He, Ya-Ling; Tao, Wen-Quan

2015-01-01

In the present study, we proposed a graphical criterion called CE diagram by achieving the Pareto optimal solutions of the annual cash flow and exergy efficiency. This new graphical criterion enables both working fluid selection and thermodynamic system comparison for waste heat recovery. It's better than the existing criterion based on single objective optimization because it is graphical and intuitionistic in the form of diagram. The features of CE diagram were illustrated by studying 5 examples with different heat-source temperatures (ranging between 100 °C to 260 °C), 26 chlorine-free working fluids and two typical ORC systems including basic organic Rankine cycle(BORC) and recuperative organic Rankine cycle (RORC). It is found that the proposed graphical criterion is feasible and can be applied to any closed loop waste heat recovery thermodynamic systems and working fluids. - Highlights: • A graphical method for ORC system comparison/working fluid selection was proposed. • Multi-objectives genetic algorithm (MOGA) was applied for optimizing ORC systems. • Application cases were performed to demonstrate the usage of the proposed method.

Creating a placental inflammatory composite index that has a high prognostic relevance to child morbidity.

Science.gov (United States)

Chen, Yan; Zou, Lile; Zhao, Yanjun; Wu, Ting; Ye, Jiangfeng; Zhang, Huijuan; Zhang, Jun

2017-07-01

Selecting pathologic measures of placental inflammation that affect pregnancy and childhood health is largely empirical. We aimed to systematically select several core inflammation-related placental measures to construct a novel placental inflammatory evaluation criterion with a high prognostic relevance to child morbidity. We used data from the US Collaborative Perinatal Project (1959-1976), a longitudinal birth cohort study that recruited women during pregnancy and followed the children until 7 years of age. Bootstrap resampling, least absolute shrinkage and selection operator, and receiver-operator curve were used to select placental pathologic measures that were closely related to child morbidity to form a placental inflammatory composite index. Twenty-six candidate placental inflammation-related measures were ranked based on their close association with adverse neonatal outcomes. The top five placental measures were: (i) neutrophilic infiltration in umbilical artery; (ii) placental weight-birthweight ratio; (iii) necrosis in decidua capsularis; (iv) bacterial colony in epithelium of amnion; and (v) opacity of membranes and fetal surface. Several composite indexes were constructed. A five-measure composite index that had the highest prognostic relevance was chosen. Compared with subjects without any of the five abnormal measures, those with any lesion ranging from 1 to 5 had a 1.2- to 4.6-fold risk of adverse child outcomes, respectively. Our composite index is simple, evidence-based, and has predictive value for child morbidity. It may be used as a novel placental inflammatory evaluation criterion. © 2017 Japan Society of Obstetrics and Gynecology.

Accuracy of a selection criterion for glass forming ability in the Ni–Nb–Zr system

International Nuclear Information System (INIS)

Déo, L.P.; Oliveira, M.F. de

2014-01-01

Highlights: • We applied a selection in the Ni–Nb–Zr system to find alloys with high GFA. • We used the thermal parameter γ m to evaluate the GFA of alloys. • The correlation between the γ m parameter and R c in the studied system is poor. • The effect of oxygen impurity reduced dramatically the GFA of alloys. • Unknown intermetallic compounds reduced the accuracy of the criterion. - Abstract: Several theories have been developed and applied in metallic systems in order to find the best stoichiometries with high glass forming ability; however there is no universal theory to predict the glass forming ability in metallic systems. Recently a selection criterion was applied in the Zr–Ni–Cu system and it was found some correlation between experimental and theoretical data. This criterion correlates critical cooling rate for glass formation with topological instability of stable crystalline structures; average work function difference and average electron density difference among the constituent elements of the alloy. In the present work, this criterion was applied in the Ni–Nb–Zr system. It was investigated the influence of factors not considered in the calculation and on the accuracy of the criterion, such as unknown intermetallic compounds and oxygen contamination. Bulk amorphous specimens were produced by injection casting. The amorphous nature was analyzed by X-ray diffraction and differential scanning calorimetry; oxygen contamination was quantified by the inert gas fusion method

A risk-based microbiological criterion that uses the relative risk as the critical limit

DEFF Research Database (Denmark)

Andersen, Jens Kirk; Nørrung, Birgit; da Costa Alves Machado, Simone

2015-01-01

A risk-based microbiological criterion is described, that is based on the relative risk associated to the analytical result of a number of samples taken from a food lot. The acceptable limit is a specific level of risk and not a specific number of microorganisms, as in other microbiological...... criteria. The approach requires the availability of a quantitative microbiological risk assessment model to get risk estimates for food products from sampled food lots. By relating these food lot risk estimates to the mean risk estimate associated to a representative baseline data set, a relative risk...... estimate can be obtained. This relative risk estimate then can be compared with a critical value, defined by the criterion. This microbiological criterion based on a relative risk limit is particularly useful when quantitative enumeration data are available and when the prevalence of the microorganism...

Experimental investigation of criteria for continuous variable entanglement.

Science.gov (United States)

Bowen, W P; Schnabel, R; Lam, P K; Ralph, T C

2003-01-31

We generate a pair of entangled beams from the interference of two amplitude squeezed beams. The entanglement is quantified in terms of EPR paradox and inseparability criteria, with both results clearly beating the standard quantum limit. We experimentally analyze the effect of decoherence on each criterion and demonstrate qualitative differences. We also characterize the number of required and excess photons present in the entangled beams and provide contour plots of the efficacy of quantum information protocols in terms of these variables.

Improving data analysis in herpetology: Using Akaike's information criterion (AIC) to assess the strength of biological hypotheses

Science.gov (United States)

Mazerolle, M.J.

2006-01-01

In ecology, researchers frequently use observational studies to explain a given pattern, such as the number of individuals in a habitat patch, with a large number of explanatory (i.e., independent) variables. To elucidate such relationships, ecologists have long relied on hypothesis testing to include or exclude variables in regression models, although the conclusions often depend on the approach used (e.g., forward, backward, stepwise selection). Though better tools have surfaced in the mid 1970's, they are still underutilized in certain fields, particularly in herpetology. This is the case of the Akaike information criterion (AIC) which is remarkably superior in model selection (i.e., variable selection) than hypothesis-based approaches. It is simple to compute and easy to understand, but more importantly, for a given data set, it provides a measure of the strength of evidence for each model that represents a plausible biological hypothesis relative to the entire set of models considered. Using this approach, one can then compute a weighted average of the estimate and standard error for any given variable of interest across all the models considered. This procedure, termed model-averaging or multimodel inference, yields precise and robust estimates. In this paper, I illustrate the use of the AIC in model selection and inference, as well as the interpretation of results analysed in this framework with two real herpetological data sets. The AIC and measures derived from it is should be routinely adopted by herpetologists. ?? Koninklijke Brill NV 2006.

Criterion-Referenced Values of Grip Strength and Usual Gait Speed Using Instrumental Activities of Daily Living Disability as the Criterion.

Science.gov (United States)

Lee, Meng-Chih; Hsu, Chih-Cheng; Tsai, Yi-Fen; Chen, Ching-Yu; Lin, Cheng-Chieh; Wang, Ching-Yi

Current evidence suggests that grip strength and usual gait speed (UGS) are important predictors of instrumental activities of daily living (IADL) disability. Knowing the optimum cut points of these tests for discriminating people with and without IADL disability could help clinicians or researchers to better interpret the test results and make medical decisions. The purpose of this study was to determine the cutoff values of grip strength and UGS for best discriminating community-dwelling older adults with and without IADL disability, separately for men and women, and to investigate their association with IADL disability. We conducted secondary data analysis on a national dataset collected in the Sarcopenia and Translational Aging Research in Taiwan (START). The data used in this study consisted of health data of 2420 community-dwelling older adults 65 years and older with no history of stroke and with complete data. IADL disability was defined as at least 1 IADL item scored as "need help" or "unable to perform." Receiver operating characteristics analysis was used to estimate the optimum grip strength and UGS cut points for best discriminating older adults with/without IADL disability. The association between each physical performance (grip strength and UGS) and IADL disability was assessed with odds ratios (ORs). With IADL disability as the criterion, the optimal cutoff values of grip strength were 28.7 kg for men and 16.0 kg for women, and those for UGS were 0.76 m/s for men and 0.66 m/s for women. The grip strength test showed satisfactory discriminant validity (area under the curve > 0.7) in men and a strong association with IADL disability (OR > 4). Our cut points using IADL disability as the criterion were close to those indicating frailty or sarcopenia. Our reported cutoffs can serve as criterion-referenced values, along with those previously determined using different indicators, and provide important landmarks on the performance continua of older adults

Extensions and applications of the Bohm criterion

Science.gov (United States)

Baalrud, Scott D.; Scheiner, Brett; Yee, Benjamin; Hopkins, Matthew; Barnat, Edward

2015-04-01

The generalized Bohm criterion is revisited in the context of incorporating kinetic effects of the electron and ion distribution functions into the theory. The underlying assumptions and results of two different approaches are compared: the conventional ‘kinetic Bohm criterion’ and a fluid-moment hierarchy approach. The former is based on the asymptotic limit of an infinitely thin sheath (λD/l = 0), whereas the latter is based on a perturbative expansion of a sheath that is thin compared to the plasma (λD/l ≪ 1). Here λD is the Debye length, which characterizes the sheath length scale, and l is a measure of the plasma or presheath length scale. The consequences of these assumptions are discussed in terms of how they restrict the class of distribution functions to which the resulting criteria can be applied. Two examples are considered to provide concrete comparisons between the two approaches. The first is a Tonks-Langmuir model including a warm ion source (Robertson 2009 Phys. Plasmas 16 103503). This highlights a substantial difference between the conventional kinetic theory, which predicts slow ions dominate at the sheath edge, and the fluid moment approach, which predicts slow ions have little influence. The second example considers planar electrostatic probes biased near the plasma potential using model equations and particle-in-cell simulations. This demonstrates a situation where electron kinetic effects alter the Bohm criterion, leading to a subsonic ion flow at the sheath edge.

Rayleigh Number Criterion for Formation of A-Segregates in Steel Castings and Ingots

DEFF Research Database (Denmark)

Rad, M. Torabi; Kotas, Petr; Beckermann, C.

2013-01-01

A Rayleigh number-based criterion is developed for predicting the formation of A-segregates in steel castings and ingots. The criterion is calibrated using available experimental data for ingots involving 27 different steel compositions. The critical Rayleigh number above which A-segregates can b......, the primary reason for this over-prediction is persumed to be the presence of a central zone of equiaxed grains in the casting sections. A-segregates do not form when the grain structure is equiaxed. © The Minerals, Metals & Materials Society and ASM International 2013...

Exploring DSM-5 criterion A in Acute Stress Disorder symptoms following natural disaster.

Science.gov (United States)

Lavenda, Osnat; Grossman, Ephraim S; Ben-Ezra, Menachem; Hoffman, Yaakov

2017-10-01

The present study examines the DSM-5 Acute Stress Disorder (ASD) diagnostic criteria of exposure, in the context of a natural disaster. The study is based on the reports of 1001 Filipinos following the aftermath of super typhoon Haiyan in 2013. Participants reported exposure to injury, psychological distress and ASD symptoms. Findings indicated the association of criterion A with the prevalence of meeting all other ASD diagnostic criteria and high psychological distress. The diagnostic properties of Criterion A are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Early Stop Criterion from the Bootstrap Ensemble

DEFF Research Database (Denmark)

Hansen, Lars Kai; Larsen, Jan; Fog, Torben L.

1997-01-01

This paper addresses the problem of generalization error estimation in neural networks. A new early stop criterion based on a Bootstrap estimate of the generalization error is suggested. The estimate does not require the network to be trained to the minimum of the cost function, as required...... by other methods based on asymptotic theory. Moreover, in contrast to methods based on cross-validation which require data left out for testing, and thus biasing the estimate, the Bootstrap technique does not have this disadvantage. The potential of the suggested technique is demonstrated on various time...

Criterion of cleavage crack propagation and arrest in a nuclear PWR vessel steel

International Nuclear Information System (INIS)

Bousquet, Amaury

2013-01-01

The purpose of this PhD thesis is to understand physical mechanisms of cleavage crack propagation and arrest in the 16MND5 PWR vessel steel and to propose a robust predicting model based on a brittle fracture experimental campaign of finely instrumented laboratory specimens associated with numerical computations. First, experiments were carried out on thin CT25 specimens at five temperatures (-150 C, -125 C, -100 C, -7 C, -50 C). Two kinds of crack path, straight or branching path, have been observed. To characterize crack propagation and to measure crack speed, a high-speed framing camera system was used, combined with the development of an experimental protocol which allowed to observe CT surface without icing inside the thermal chamber and on the specimen. The framing camera (520 000 fps) has allowed to have a very accurate estimation of crack speed on the complete ligament of CT (∼ 25 mm). Besides, to analyse experiments and to study the impact of viscosity on the mechanical response around the crack tip, the elastic-viscoplastic behavior of the ferritic steel has been studied up to a strain rate of 104 s -1 for the tested temperatures.The extended Finite Element Method (X-FEM) was used in CAST3M FE software to model crack propagation. Numerical computations combine a local non linear dynamic approach with a RKR type fracture stress criterion to a characteristic distance. The work carried out has confirmed the form of the criterion proposed by Prabel at -125 C, and has identified the dependencies of the criterion on temperature and strain rate. From numerical analyzes in 2D and 3D, a multi-temperature fracture stress criterion, increasing function of the strain rate, was proposed. Predictive modeling were used to confirm the identified criterion on two specimen geometries (CT and compressive ring) in mode I at different temperatures. SEM observations and 3D analyzes made with optical microscope showed that the fracture mechanism was the cleavage associated

Basis note in behalf of the development of a test criterion for the storage of radioactive waste

International Nuclear Information System (INIS)

1987-09-01

Aspects are described which may play a role in the development of a criterion for a final storage of radioactive waste. Such a criterion consists of a set of requirements concerning the quality of environment and public health, with which a proposal for the final storage of the waste has to be compared. The criterion should be able to give decisive answers regarding the acceptibility of a storage but should also be useful for the judgment of risk-analyses which are therefore necessary. 10 refs.; 9 figs.; 3 tabs

Restoring Natural Streamflow Variability by Modifying Multi-purpose Reservoir Operation

Science.gov (United States)

Shiau, J.

2010-12-01

Multi-purpose reservoirs typically provide benefits of water supply, hydroelectric power, and flood mitigation. Hydroelectric power generations generally do not consume water. However, temporal distribution of downstream flows is highly changed due to hydro-peaking effects. Associated with offstream diversion of water supplies for municipal, industrial, and agricultural requirements, natural streamflow characteristics of magnitude, duration, frequency, timing, and rate of change is significantly altered by multi-purpose reservoir operation. Natural flow regime has long been recognized a master factor for ecosystem health and biodiversity. Restoration of altered flow regime caused by multi-purpose reservoir operation is the main objective of this study. This study presents an optimization framework that modifying reservoir operation to seeking balance between human and environmental needs. The methodology presented in this study is applied to the Feitsui Reservoir, located in northern Taiwan, with main purpose of providing stable water-supply and auxiliary purpose of electricity generation and flood-peak attenuation. Reservoir releases are dominated by two decision variables, i.e., duration of water releases for each day and percentage of daily required releases within the duration. The current releasing policy of the Feitsui Reservoir releases water for water-supply and hydropower purposes during 8:00 am to 16:00 pm each day and no environmental flows releases. Although greater power generation is obtained by 100% releases distributed within 8-hour period, severe temporal alteration of streamflow is observed downstream of the reservoir. Modifying reservoir operation by relaxing these two variables and reserve certain ratio of streamflow as environmental flow to maintain downstream natural variability. The optimal reservoir releasing policy is searched by the multi-criterion decision making technique for considering reservoir performance in terms of shortage ratio

Automatic Relevance Determination for multi-way models

DEFF Research Database (Denmark)

Mørup, Morten; Hansen, Lars Kai

2009-01-01

of components of data within the Tucker and CP structure. For the Tucker and CP model the approach performs better than heuristics such as the Bayesian Information Criterion, Akaikes Information Criterion, DIFFIT and the numerical convex hull (NumConvHull) while operating only at the cost of estimating...... is available for download at www.erpwavelab.org....

The precautionary principle as a rational decision criterion; Foere var-prinsippet som rasjonelt beslutningsgrunnlag

Energy Technology Data Exchange (ETDEWEB)

Hovi, Jon

2001-12-01

The paper asks if the precautionary principle may be seen as a rational decision criterion. Six main questions are discussed. 1. Does the principle basically represent a particular set of political options or is it a genuine decision criterion? 2. If it is the latter, can it be reduced to any of the existing criteria for decision making under uncertainty? 3. In what kinds of situation is the principle applicable? 4. What is the relation between the precautionary principle and other principles for environmental regulation? 5. How plausible is the principle's claim that the burden of proof should be reversed? 6. Do the proponents of environmental regulation carry no burden of proof at all? A main conclusion is that, for now at least, the principle contains too many unclear elements to satisfy the requirements of precision and consistency that should reasonably be satisfied by a rational decision criterion. (author)

Variable Step Size Maximum Correntropy Criteria Based Adaptive Filtering Algorithm

Directory of Open Access Journals (Sweden)

S. Radhika

2016-04-01

Full Text Available Maximum correntropy criterion (MCC based adaptive filters are found to be robust against impulsive interference. This paper proposes a novel MCC based adaptive filter with variable step size in order to obtain improved performance in terms of both convergence rate and steady state error with robustness against impulsive interference. The optimal variable step size is obtained by minimizing the Mean Square Deviation (MSD error from one iteration to the other. Simulation results in the context of a highly impulsive system identification scenario show that the proposed algorithm has faster convergence and lesser steady state error than the conventional MCC based adaptive filters.

Articulatory variability in cluttering.

Science.gov (United States)

Hartinger, Mariam; Mooshammer, Christine

2008-01-01

In order to investigate the articulatory processes of the hasty and mumbled speech in cluttering, the kinematic variability was analysed by means of electromagnetic midsagittal articulography. In contrast to persons with stuttering, those with cluttering improve their intelligibility by concentrating on their speech task. Variability has always been an important criterion in comparable studies of stuttering and is discussed in terms of the stability of the speech motor system. The aim of the current study was to analyse the spatial and temporal variability in the speech of three persons with cluttering (PWC) and three control speakers. All participants were native speakers of German. The speech material consisted of repetitive CV syllables and loan words such as 'emotionalisieren', because PWC have the severest problems with long words with a complex syllable structure. The results showed a significantly higher coefficient of variation for PWC in loan word production, both in the temporal and in the spatial domain, whereas the means of displacements and durations did not differ between groups. These findings were discussed in terms of the effects of the linguistic complexity, since for the syllable repetition task, no significant differences between PWC and controls were found. Copyright 2008 S. Karger AG, Basel.

Criterion for vortex breakdown on shock wave and streamwise vortex interactions.

Science.gov (United States)

Hiejima, Toshihiko

2014-05-01

The interactions between supersonic streamwise vortices and oblique shock waves are theoretically and numerically investigated by three-dimensional (3D) Navier-Stokes equations. Based on the two inequalities, a criterion for shock-induced breakdown of the streamwise vortex is proposed. The simple breakdown condition depends on the Mach number, the swirl number, the velocity deficit, and the shock angle. According to the proposed criterion, the breakdown region expands as the Mach number increases. In numerical simulations, vortex breakdown appeared under conditions of multiple pressure increases and the helicity disappeared behind the oblique shock wave along the line of the vortex center. The numerical results are consistent with the predicted breakdown condition at Mach numbers 2.0 and 3.0. This study also found that the axial velocity deficit is important for classifying the breakdown configuration.

Climatological variability in regional air pollution

International Nuclear Information System (INIS)

Shannon, J.D.; Trexler, E.C. Jr.

1995-01-01

Although some air pollution modeling studies examine events that have already occurred (e.g., the Chernobyl plume) with relevant meteorological conditions largely known, most pollution modeling studies address expected or potential scenarios for the future. Future meteorological conditions, the major pollutant forcing function other than emissions, are inherently uncertain although much relevant information is contained in past observational data. For convenience in our discussions of regional pollutant variability unrelated to emission changes, we define meteorological variability as short-term (within-season) pollutant variability and climatological variability as year-to-year changes in seasonal averages and accumulations of pollutant variables. In observations and in some of our simulations the effects are confounded because for seasons of two different years both the mean and the within-season character of a pollutant variable may change. Effects of climatological and meteorological variability on means and distributions of air pollution parameters, particularly those related to regional visibility, are illustrated. Over periods of up to a decade climatological variability may mask or overstate improvements resulting from emission controls. The importance of including climatological uncertainties in assessing potential policies, particularly when based partly on calculated source-receptor relationships, is highlighted

A practical criterion of irreducibility of multi-loop Feynman integrals

International Nuclear Information System (INIS)

Baikov, P.A.

2006-01-01

A practical criterion for the irreducibility (with respect to integration by part identities) of a particular Feynman integral to a given set of integrals is presented. The irreducibility is shown to be related to the existence of stable (with zero gradient) points of a specially constructed polynomial

Novel criterion for formation of metastable phase from undercooled melt

International Nuclear Information System (INIS)

Kuribayashi, Kazuhiko; Nagashio, Kosuke; Niwata, Kenji; Kumar, M.S. Vijaya; Hibiya, Taketoshi

2007-01-01

Undercooling a melt facilitates the preferential nucleation of a metastable phase. In the present study, the formation of metastable phases from undercooled melts was considered from the viewpoint of the competitive nucleation criterion. The classical nucleation theory shows us that the most critical factor for forming a critical nucleus is the interface free energy σ. Furthermore, Spaepen's negentropic model on σ generated the role of the scaling factor α that depends on the polyhedral order in the liquid and solid phases prominent in simple liquids such as the melt of monoatomic metals. In ionic materials such as oxides, however, in which oxygen polyhedrons including a cation at their center are the structural units both in the solid and liquid phases, the entropy of fusion, rather than α, can be expected to become dominant in the determination of σ. In accordance with this idea, using REFeO 3 as the model material (where RE denotes rare-earth elements) the entropy-undercooling regime criterion was proposed and verified

A new diagnostic accuracy measure and cut-point selection criterion.

Science.gov (United States)

Dong, Tuochuan; Attwood, Kristopher; Hutson, Alan; Liu, Song; Tian, Lili

2017-12-01

Most diagnostic accuracy measures and criteria for selecting optimal cut-points are only applicable to diseases with binary or three stages. Currently, there exist two diagnostic measures for diseases with general k stages: the hypervolume under the manifold and the generalized Youden index. While hypervolume under the manifold cannot be used for cut-points selection, generalized Youden index is only defined upon correct classification rates. This paper proposes a new measure named maximum absolute determinant for diseases with k stages ([Formula: see text]). This comprehensive new measure utilizes all the available classification information and serves as a cut-points selection criterion as well. Both the geometric and probabilistic interpretations for the new measure are examined. Power and simulation studies are carried out to investigate its performance as a measure of diagnostic accuracy as well as cut-points selection criterion. A real data set from Alzheimer's Disease Neuroimaging Initiative is analyzed using the proposed maximum absolute determinant.

Distinct anatomical correlates of discriminability and criterion setting in verbal recognition memory revealed by lesion-symptom mapping

NARCIS (Netherlands)

Biesbroek, J Matthijs; van Zandvoort, Martine J E; Kappelle, L Jaap; Schoo, Linda; Kuijf, Hugo J; Velthuis, Birgitta K; Biessels, Geert Jan; Postma, Albert

2014-01-01

Recognition memory, that is, the ability to judge whether an item has been previously encountered in a particular context, depends on two factors: discriminability and criterion setting. Discriminability draws on memory processes while criterion setting (i.e., the application of a threshold

Distinct anatomical correlates of discriminability and criterion setting in verbal recognition memory revealed by lesion-symptom mapping

NARCIS (Netherlands)

Biesbroek, J. Matthijs; van Zandvoort, Martine J E; Kappelle, L. Jaap; Schoo, Linda; Kuijf, Hugo J.; Velthuis, BK; Biessels, Geert Jan; Postma, Albert

2015-01-01

Recognition memory, that is, the ability to judge whether an item has been previously encountered in a particular context, depends on two factors: discriminability and criterion setting. Discriminability draws on memory processes while criterion setting (i.e., the application of a threshold

[GSH fermentation process modeling using entropy-criterion based RBF neural network model].

Science.gov (United States)

Tan, Zuoping; Wang, Shitong; Deng, Zhaohong; Du, Guocheng

2008-05-01

The prediction accuracy and generalization of GSH fermentation process modeling are often deteriorated by noise existing in the corresponding experimental data. In order to avoid this problem, we present a novel RBF neural network modeling approach based on entropy criterion. It considers the whole distribution structure of the training data set in the parameter learning process compared with the traditional MSE-criterion based parameter learning, and thus effectively avoids the weak generalization and over-learning. Then the proposed approach is applied to the GSH fermentation process modeling. Our results demonstrate that this proposed method has better prediction accuracy, generalization and robustness such that it offers a potential application merit for the GSH fermentation process modeling.

Wavelength selection in injection-driven Hele-Shaw flows: A maximum amplitude criterion

Science.gov (United States)

Dias, Eduardo; Miranda, Jose

2013-11-01

As in most interfacial flow problems, the standard theoretical procedure to establish wavelength selection in the viscous fingering instability is to maximize the linear growth rate. However, there are important discrepancies between previous theoretical predictions and existing experimental data. In this work we perform a linear stability analysis of the radial Hele-Shaw flow system that takes into account the combined action of viscous normal stresses and wetting effects. Most importantly, we introduce an alternative selection criterion for which the selected wavelength is determined by the maximum of the interfacial perturbation amplitude. The effectiveness of such a criterion is substantiated by the significantly improved agreement between theory and experiments. We thank CNPq (Brazilian Sponsor) for financial support.

Nucleation of recrystallization in fine-grained materials: an extension of the Bailey-Hirsch criterion

Science.gov (United States)

Favre, Julien; Fabrègue, Damien; Chiba, Akihiko; Bréchet, Yves

2013-11-01

A new criterion for nucleation in the case of dynamic recrystallization is proposed in order to include the contribution of the grain boundary energy stored in the microstructure in the energy balance. Due to the nucleation events, the total surface area of pre-existing grain boundaries decreases, leading to a nucleus size smaller than expected by conventional nucleation criteria. The new model provides a better prediction of the nucleus size during recrystallization of pure copper compared with the conventional nucleation criterion.

The economic lot size and relevant costs

NARCIS (Netherlands)

Corbeij, M.H.; Jansen, R.A.; Grübström, R.W.; Hinterhuber, H.H.; Lundquist, J.

1993-01-01

In many accounting textbooks it is strongly argued that decisions should always be evaluated on relevant costs; that is variable costs and opportunity costs. Surprisingly, when it comes to Economic Order Quantities or Lot Sizes, some textbooks appear to be less straightforward. The question whether

Collective variables and dissipation

International Nuclear Information System (INIS)

Balian, R.

1984-09-01

This is an introduction to some basic concepts of non-equilibrium statistical mechanics. We emphasize in particular the relevant entropy relative to a given set of collective variables, the meaning of the projection method in the Liouville space, its use to establish the generalized transport equations for these variables, and the interpretation of dissipation in the framework of information theory

An adaptive pruning algorithm for the discrete L-curve criterion

DEFF Research Database (Denmark)

Hansen, Per Christian; Jensen, Toke Koldborg; Rodriguez, Giuseppe

2007-01-01

We describe a robust and adaptive implementation of the L-curve criterion, i.e., for locating the corner of a discrete L-curve consisting of a log-log plot of corresponding residual and solution norms of regularized solutions from a method with a discrete regularization parameter (such as truncated...

Numerical and Experimental Validation of a New Damage Initiation Criterion

NARCIS (Netherlands)

Sadhinoch, M.; Atzema, E.H.; Perdahcioglu, E.S.; Van Den Boogaard, A.H.

2017-01-01

Most commercial finite element software packages, like Abaqus, have a built-in coupled damage model where a damage evolution needs to be defined in terms of a single fracture energy value for all stress states. The Johnson-Cook criterion has been modified to be Lode parameter dependent and this

Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

Directory of Open Access Journals (Sweden)

Chang-Gi Min

2017-06-01

Full Text Available This study proposes an evaluation method for variable generation (VG acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion. VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was applied to the generation expansion plan in Korea for 2029 in order to examine the validity of the existing plan for VG penetration. Sensitivity analysis was also performed to analyze the effects of changes in system uncertainty on VG acceptability. The results show that the planned VG penetration level for 2029 can improve by approximately 12% while securing flexibility.

Failure criterion effect on solid production prediction and selection of completion solution

Directory of Open Access Journals (Sweden)

Dariush Javani

2017-12-01

Full Text Available Production of fines together with reservoir fluid is called solid production. It varies from a few grams or less per ton of reservoir fluid posing only minor problems, to catastrophic amount possibly leading to erosion and complete filling of the borehole. This paper assesses solid production potential in a carbonate gas reservoir located in the south of Iran. Petrophysical logs obtained from the vertical well were employed to construct mechanical earth model. Then, two failure criteria, i.e. Mohr–Coulomb and Mogi–Coulomb, were used to investigate the potential of solid production of the well in the initial and depleted conditions of the reservoir. Using these two criteria, we estimated critical collapse pressure and compared them to the reservoir pressure. Solid production occurs if collapse pressure is greater than pore pressure. Results indicate that the two failure criteria show different estimations of solid production potential of the studied reservoir. Mohr–Coulomb failure criterion estimated solid production in both initial and depleted conditions, where Mogi–Coulomb criterion predicted no solid production in the initial condition of reservoir. Based on Mogi–Coulomb criterion, the well may not require completion solutions like perforated liner, until at least 60% of reservoir pressure was depleted which leads to decrease in operation cost and time.

New Quality Assessment Criterion of AlSi5Cu1 Alloy

Directory of Open Access Journals (Sweden)

M. Wierzbińska

2007-07-01

Full Text Available The paper presents the discussion of the results of mechanical testing for aluminium foundry alloy AlSi5Cu1Mg for high-loaded machine elements. Values of yield strength (Rp0.2, tensile strength (Rm, elongation(A5 and hardness (HB are usually considered as the primary quality assessment criterion for a manufacturing process. It was concluded, that this criterion, A5 index particularly, is unsatisfactory to estimate the plasticity of the alloy and its crack resistance in the presence of sharp-pointed stress concentrators or microcracks. More adequate parameter is plane strain fracture toughness KIc. However, size of the samples appeared to be twice as large as would be needed to fulfill requirements of test conditions, and the test itself is laborious and time-consuming that it becomes impractical as a acceptance test. Therefore, substitute test for quality assessment – determination of tensile strength in the presence of a sharp notch kmR was applied. The comparative analysis of kmR/Rp0.2 ratio, as a more enhanced fatigue resistance criterion than kmR and plane strain fracture toughness KIc of the alloy was performed. It was assumed that kmR/Rp0.2 parameter has good correlation with the critical stress intensity factor KIc Thus, under manufacturing process conditions, being unable to carry out KIc test, it may be successfully replaced by kmR test.

The limits of the Bohm criterion in collisional plasmas

International Nuclear Information System (INIS)

Valentini, H.-B.; Kaiser, D.

2015-01-01

The sheath formation within a low-pressure collisional plasma is analysed by means of a two-fluid model. The Bohm criterion takes into account the effects of the electric field and the inertia of the ions. Numerical results yield that these effects contribute to the space charge formation, only, if the collisionality is lower than a relatively small threshold. It follows that a lower and an upper limit of the drift speed of the ions exist where the effects treated by Bohm can form a sheath. This interval becomes narrower as the collisionality increases and vanishes at the mentioned threshold. Above the threshold, the sheath is mainly created by collisions and the ionisation. Under these conditions, the sheath formation cannot be described by means of Bohm like criteria. In a few references, a so-called upper limit of the Bohm criterion is stated for collisional plasmas where the momentum equation of the ions is taken into account, only. However, the present paper shows that this limit results in an unrealistically steep increase of the space charge density towards the wall, and, therefore, it yields no useful limit of the Bohm velocity

Geometric steering criterion for two-qubit states

Science.gov (United States)

Yu, Bai-Chu; Jia, Zhih-Ahn; Wu, Yu-Chun; Guo, Guang-Can

2018-01-01

According to the geometric characterization of measurement assemblages and local hidden state (LHS) models, we propose a steering criterion which is both necessary and sufficient for two-qubit states under arbitrary measurement sets. A quantity is introduced to describe the required local resources to reconstruct a measurement assemblage for two-qubit states. We show that the quantity can be regarded as a quantification of steerability and be used to find out optimal LHS models. Finally we propose a method to generate unsteerable states, and construct some two-qubit states which are entangled but unsteerable under all projective measurements.

Ductile failure analysis of API X65 pipes with notch-type defects using a local fracture criterion

International Nuclear Information System (INIS)

Oh, Chang-Kyun; Kim, Yun-Jae; Baek, Jong-Hyun; Kim, Young-Pyo; Kim, Woo-Sik

2007-01-01

A local failure criterion for API X65 steel is applied to predict ductile failure of full-scale API X65 pipes with simulated corrosion and gouge defects under internal pressure. The local failure criterion is the stress-modified fracture strain as a function of the stress triaxiality (defined by the ratio of the hydrostatic stress to the effective stress). Based on detailed finite element (FE) analyses with the proposed local failure criterion, burst pressures of defective pipes are estimated and compared with experimental data. For pipes with simulated corrosion defects, FE analysis with the proposed local fracture criterion indicates that predicted failure takes place after the defective pipes attain maximum loads for all cases, possibly due to the fact that the material has sufficient ductility. For pipes with simulated gouge defects, on the other hand, it is found that predicted failure takes place before global instability, and the predicted burst pressures are in good agreement with experimental data, providing confidence in the present approach

Cue quality and criterion setting in recognition memory.

Science.gov (United States)

Kent, Christopher; Lamberts, Koen; Patton, Richard

2018-02-02

Previous studies on how people set and modify decision criteria in old-new recognition tasks (in which they have to decide whether or not a stimulus was seen in a study phase) have almost exclusively focused on properties of the study items, such as presentation frequency or study list length. In contrast, in the three studies reported here, we manipulated the quality of the test cues in a scene-recognition task, either by degrading through Gaussian blurring (Experiment 1) or by limiting presentation duration (Experiment 2 and 3). In Experiments 1 and 2, degradation of the test cue led to worse old-new discrimination. Most importantly, however, participants were more liberal in their responses to degraded cues (i.e., more likely to call the cue "old"), demonstrating strong within-list, item-by-item, criterion shifts. This liberal response bias toward degraded stimuli came at the cost of increasing the false alarm rate while maintaining a constant hit rate. Experiment 3 replicated Experiment 2 with additional stimulus types (words and faces) but did not provide accuracy feedback to participants. The criterion shifts in Experiment 3 were smaller in magnitude than Experiments 1 and 2 and varied in consistency across stimulus type, suggesting, in line with previous studies, that feedback is important for participants to shift their criteria.

Information relevant to ensuring that occupational radiation exposures at nuclear power stations will be as low as in reasonably achievable

International Nuclear Information System (INIS)

Anon.

1979-01-01

Regulations require that all reasonable efforts must be made to maintain exposure to radiation as far below the limits specified in 10 CFR Part 20 as is reasonably achievable. Information is provided relevant to attaining goals and objectives for planning, designing, constructing, operating and decommissioning a light-water-cooled nuclear power station to meet that criterion. Much of the information presented is also applicable to other than light-water-cooled nuclear power stations

Developing a brittle fracture acceptance criterion for transport casks for adoption by the International Atomic Energy Agency(IAEA)

International Nuclear Information System (INIS)

Sorenson, K.B.; Falci, F.P.

1991-01-01

With increasing nuclear material transportation demands, new generation casks have included designs which propose the use of structural materials other than austenitic stainless steel. Motivation for using alternate materials include potentials for lower cost, easier fabrication, no welding and less weight (higher payload). Examples of candidate materials for structural components include ferritic steels and ductile cast iron for the containment boundary and borated stainless steel for the basket. The primary technical issue which separates these candidate materials from austenitic stainless steel is that they may, under certain combinations of mechanical and environmental loadings, fail in a brittle fracture mode. There is a clear need to develop a consensus criterion that will encompass a broad range of materials and provide a consistent method for evaluating candidate materials with respect to brittle fracture. Adopting such a criterion through the auspices of the IAEA has distinct advantages. An international consensus would provide assurance to regulators and the public that the most appropriate method is used, and countries developing packages using candidate materials could work with a single criterion without concern that another country is setting precedent using a different criterion. The development of such a criterion has been in progress for two and one-half years. There are two major efforts which are being pursued in parallel. There is the technical effort to write a draft document and the formal effort to facilitate adoption of a criterion by the IAEA. 7 refs., 1 fig

Should she be granted asylum? Examining the justifiability of the persecution criterion and nexus clause in asylum law

Directory of Open Access Journals (Sweden)

Noa Wirth Nogradi

2016-10-01

Full Text Available The current international asylum regime recognizes only persecuted persons as rightful asylum applicants. The Geneva Convention and Protocol enumerate specific grounds upon which persecution is recognized. Claimants who cannot demonstrate a real risk of persecution based on one of the recognized grounds are unlikely to be granted asylum. This paper aims to relate real-world practices to normative theories, asking whether the Convention’s restricted preference towards persecuted persons is normatively justified. I intend to show that the justifications of the persecution criterion also apply to grounds currently lacking recognition. My main concern will be persecution on the grounds of gender.The first section introduces the dominant standpoints in theories of asylum, which give different answers to the question of who should be granted asylum, based on different normative considerations. Humanitarian theories base their claims on the factual neediness of asylum-seekers, holding that whoever is in grave danger of harm or deprivation should be granted asylum. Political theories base their justifications on conceptions of legitimacy and membership, holding that whoever has been denied membership in their original state should be granted asylum. Under political theories, Matthew Price’s theory will be discussed, which provides a normative justification of the currently recognized persecution criterion. The second section provides a descriptive definition of persecution based on Kuosmanen (2014, and evaluates the normative relevance of the different elements of this definition based on the theories presented previously. The third section is devoted to the examination of the normative justifiability of the nexus clause’s exclusive list of the bases (grounds upon which persons might be persecuted. The section argues that while the clause does not recognize that persecution might be based on gender, in fact many women experience harms based on

Non-Noether Conserved Quantity for Relativistic Nonholonomic System with Variable Mass

International Nuclear Information System (INIS)

Qiao Yongfen; Li Renjie; Ma Yongsheng

2005-01-01

Using form invariance under special infinitesimal transformations in which time is not variable, the non-Noether conserved quantity of the relativistic nonholonomic system with variable mass is studied. The differential equations of motion of the system are established. The definition and criterion of the form invariance of the system under infinitesimal transformations are studied. The necessary and sufficient condition under which the form invariance is a Lie symmetry is given. The condition under which the form invariance can be led to a non-Noether conserved quantity and the form of the conserved quantity are obtained. Finally, an example is given to illustrate the application of the result.

An Empirical Model Building Criterion Based on Prediction with Applications in Parametric Cost Estimation.

Science.gov (United States)

1980-08-01

varia- ble is denoted by 7, the total sum of squares of deviations from that mean is defined by n - SSTO - (-Y) (2.6) iul and the regression sum of...squares by SSR - SSTO - SSE (2.7) II 14 A selection criterion is a rule according to which a certain model out of the 2p possible models is labeled "best...dis- cussed next. 1. The R2 Criterion The coefficient of determination is defined by R2 . 1 - SSE/ SSTO . (2.8) It is clear that R is the proportion of

Star Products with Separation of Variables Admitting a Smooth Extension

Science.gov (United States)

Karabegov, Alexander

2012-08-01

Given a complex manifold M with an open dense subset Ω endowed with a pseudo-Kähler form ω which cannot be smoothly extended to a larger open subset, we consider various examples where the corresponding Kähler-Poisson structure and a star product with separation of variables on (Ω, ω) admit smooth extensions to M. We give a simple criterion of the existence of a smooth extension of a star product and apply it to these examples.

Star products with separation of variables admitting a smooth extension

OpenAIRE

Karabegov, Alexander

2010-01-01

Given a complex manifold $M$ with an open dense subset $\\Omega$ endowed with a pseudo-Kaehler form $\\omega$ which cannot be smoothly extended to a larger open subset, we consider various examples where the corresponding Kaehler-Poisson structure and a star product with separation of variables on $(\\Omega, \\omega)$ admit smooth extensions to $M$. We suggest a simple criterion of the existence of a smooth extension of a star product and apply it to these examples.

Delay-Dependent Stability Criterion for Bidirectional Associative Memory Neural Networks with Interval Time-Varying Delays

Science.gov (United States)

Park, Ju H.; Kwon, O. M.

In the letter, the global asymptotic stability of bidirectional associative memory (BAM) neural networks with delays is investigated. The delay is assumed to be time-varying and belongs to a given interval. A novel stability criterion for the stability is presented based on the Lyapunov method. The criterion is represented in terms of linear matrix inequality (LMI), which can be solved easily by various optimization algorithms. Two numerical examples are illustrated to show the effectiveness of our new result.

Some comments about the use of J1 integral criterion

International Nuclear Information System (INIS)

Roche, Roland.

1977-01-01

Use of J 1 integral criterion in Post Yield Fracture Mechanics is considered. If J 1 is path independent, it can be considered as a crack tip singularity characterization and then, as a good criterion for crack initiation. But it is not proved that J 1 is path independent in general case. The current practice is to consider a material with a mechanical potential energy, it is to say to suppose that strain energy W is only function of the state of strain, but not of the loading history. It is possible to introduce the defect vector concept (or driving force). The resultants of defect vectors included inside a volume are the surface integrals J vector and L vector. So the general condition for J 1 path indepedence can be written. It seems that J 1 is path independent for radial loading but the question is still open for more complex ways of loading. What is the effect of material memory on the J 1 path dependence [fr

Procedure, algorithm and criterions of determination of a burnup of a irradiated nuclear fuel in process of overloading

International Nuclear Information System (INIS)

Bilej, D.V.; Fridman, N.A.; Maslov, O.V.; Maksimov, M.V.

2001-01-01

The procedure, algorithm and criterions of determination of a burnup of the irradiated nuclear fuel in process of overloading are described. The feature of the procedure, algorithm and criterions consists in the account of initial enrichment and cooling time nuclear fuel after irradiation

The criterion for time symmetry of probabilistic theories and the reversibility of quantum mechanics

International Nuclear Information System (INIS)

Holster, A T

2003-01-01

Physicists routinely claim that the fundamental laws of physics are 'time symmetric' or 'time reversal invariant' or 'reversible'. In particular, it is claimed that the theory of quantum mechanics is time symmetric. But it is shown in this paper that the orthodox analysis suffers from a fatal conceptual error, because the logical criterion for judging the time symmetry of probabilistic theories has been incorrectly formulated. The correct criterion requires symmetry between future-directed laws and past-directed laws. This criterion is formulated and proved in detail. The orthodox claim that quantum mechanics is reversible is re-evaluated. The property demonstrated in the orthodox analysis is shown to be quite distinct from time reversal invariance. The view of Satosi Watanabe that quantum mechanics is time asymmetric is verified, as well as his view that this feature does not merely show a de facto or 'contingent' asymmetry, as commonly supposed, but implies a genuine failure of time reversal invariance of the laws of quantum mechanics. The laws of quantum mechanics would be incompatible with a time-reversed version of our universe

Maintenance and enhancement of long-term multiple socioeconomic benefits to meet the needs of societies. Criterion 6.

Science.gov (United States)

Ken Skog; James Howard; Susan Alexander; Ken Cordell; Marla Emery; Evan Mercer; Shela Mou; Kristen Magis; Maureen. McDonough

2011-01-01

This report provides a comprehensive picture of current conditions and trends in our Nation's forests, its forest industries, and its forest communities. Although the first five criteria are centered in the environmental sphere of sustainability (with the exception of Criterion 2, which clearly overlaps the economic sphere), Criterion 6 is centered firmly in the...

TEMPERATURE-DEFORMATION CRITERION OF OPTIMIZATION OF FINE DRAWING HIGH CARBON WIRE ROUTE

Directory of Open Access Journals (Sweden)

Y. L. Bobarikin

2012-01-01

Full Text Available The temperature-deformation criterion of assessment and optimization of routes of the thin high-carbon wire drawing enabling to increase plastic properties of wire at retaining of its durability is offered.

Ten Issues in Criterion-Referenced Testing: A Response to Commonly Heard Criticisms.

Science.gov (United States)

Curlette, William L.; Stallings, William M.

1979-01-01

The 10 criticisms of criterion-referenced tests addressed in this paper are: the domains tested; pedagogical influence; difficulty of items; cumbersome reports; reliability; arbitrary criteria; local objectives; labeling; predictive validity; and repeated testing. (SJL)

Generation of three-mode continuous-variable entanglement by cascaded nonlinear interactions in a quasiperiodic superlattice

International Nuclear Information System (INIS)

Yu, Y. B.; Xie, Z. D.; Yu, X. Q.; Li, H. X.; Xu, P.; Yao, H. M.; Zhu, S. N.

2006-01-01

The generation of three-mode continuous-variable entanglement in a quasiperiodically optical superlattice is studied theoretically in this paper. This work is based on the previous experiment result in which three-color light generated from a quasiperiodically optical superlattice through a stimulated parametric down-conversion cascaded with a sum-frequency process. The degree of quadrature phase amplitude correlations, a nonclassical characteristic, among the three mode was discussed by a sufficient inseparability criterion for continuous-variable entanglement, which was proposed by van Loock and Furusawa

Evaluations of the criterion for lateral expansion of steels for nuclear components

International Nuclear Information System (INIS)

Susukida, H.; Satoh, M.; Fukuhara, A.

1980-01-01

The Charpy V notch impact tests were performed on Japanese made ferritic steels for nuclear components and their lateral expansions were investigated. The correlations of lateral expansion and absorbed energy with yield strength, and the correlation between lateral expansion and fracture toughness were also studied. The correlation at each lateral expansion level between absorbed energy and yield strength almost agreed with that published by the US PVRC. It was confirmed that lateral expansion could be used as a criterion for the toughness of the steels corresponding to changes in their yield strength, and that the lateral expansion criterion adopted in the ASME Code Section III was appropriate. Further, the correlation between fracture toughness and lateral expansion and that between fracture toughness and absorbed energy, were evaluated, and respective equations of correlation were proposed. (author)

Relative criterion for validity of a semiclassical approach to the dynamics near quantum critical points.

Science.gov (United States)

Wang, Qian; Qin, Pinquan; Wang, Wen-ge

2015-10-01

Based on an analysis of Feynman's path integral formulation of the propagator, a relative criterion is proposed for validity of a semiclassical approach to the dynamics near critical points in a class of systems undergoing quantum phase transitions. It is given by an effective Planck constant, in the relative sense that a smaller effective Planck constant implies better performance of the semiclassical approach. Numerical tests of this relative criterion are given in the XY model and in the Dicke model.

Physical and Constructive (Limiting) Criterions of Gear Wheels Wear

Science.gov (United States)

Fedorov, S. V.

2018-01-01

We suggest using a generalized model of friction - the model of elastic-plastic deformation of the body element, which is located on the surface of the friction pairs. This model is based on our new engineering approach to the problem of friction-triboergodynamics. Friction is examined as transformative and dissipative process. Structural-energetic interpretation of friction as a process of elasto-plastic deformation and fracture contact volumes is proposed. The model of Hertzian (heavy-loaded) friction contact evolution is considered. The least wear particle principle is formulated. It is mechanical (nano) quantum. Mechanical quantum represents the least structural form of solid material body in conditions of friction. It is dynamic oscillator of dissipative friction structure and it can be examined as the elementary nanostructure of metal’s solid body. At friction in state of most complete evolution of elementary tribosystem (tribocontact) all mechanical quanta (subtribosystems) with the exception of one, elasticity and reversibly transform energy of outer impact (mechanic movement). In these terms only one mechanical quantum is the lost - standard of wear. From this position we can consider the physical criterion of wear and the constructive (limiting) criterion of gear teeth and other practical examples of tribosystems efficiency with new tribology notion - mechanical (nano) quantum.

ACTION AS A CRITERION OF THE CAR OPERATING EFFECTIVENES

Directory of Open Access Journals (Sweden)

Stefan POSTRZEDNIK

2016-06-01

Full Text Available Currently used criteria for determining car operating efficiency in road traffic are, among others, emission of harmful substances, consumption of engine driving fuels, technical service and reliability of operation, safety of use. The operational characteristics of the car in terms of engine driving fuel consumption data is usually recognised as so-called road specific fuel consumption. An important deficiency of this approach is the failure to take into account the influence of the time on the journey’s effectiveness and the final result of the entire project. To obtain a new solution in this range in the analysis, a quantity called "action", which at last will be treated as the criterion of the car operating effectiveness, was used. The quantity of action is the product of the performed work and its realisation time. Many phenomena and processes in nature take place according to the principle of "minimum of action"  this criterion can be applied in the analysis of the car’s operating efficiency taking place in road traffic. An approach of this issue is presented in this article, wherein the basic data for analysis were obtained in the framework of the car tests performed at the real traffic conditions.

Net Income, Book Value and Cash Flows: The Value Relevance in Jordanian Economic Sectors

Directory of Open Access Journals (Sweden)

DHIAA SHAMKI

2013-07-01

Full Text Available This paper examines the value relevance of financial statements variables namely net income, book value and cash flows simultaneously relative to Jordanian services and industrial firms for the period from 2000 to 2009. The main findings of this paper are three- dimensional. First, net income is value relevant, while book value and cash flows are irrelevant. Second, net income is more value relevant than book value and cash flows in both sectors. Third, this value relevance is greater in services sector than in industrial sector. The study shows that net income assist more in explaining market values in Jordanian services and industrial firms. Since research on the value relevance of these variables has neglected Jordan (and the Middle Eastern region, the study tries to fill this practical gap. The study is the first in Jordan that examines the value relevance of net income, book value and cash flows simultaneously and compares this value relevance according to Amman Stock Exchange sectors in one study in Jordan.

Criterion for adoption of urgent decision on population protection measures in case of NPP accident

International Nuclear Information System (INIS)

Konstantinov, Yu.O.

1985-01-01

The main table of a criterion for making decision about population protection measures in case of NPP accident is reconsidered. In comparison with the previous data the table doesn't contain contact irradiation and food-stuff contamination with 90 Sr and 137 Cs because of their insignificance relatively to external irradiation as a result of inert radioactive gaseous and halogen release and internal irradiation by iodine radioisotopes. Defining more exactly the criterion one should pay more attention to the discussion of numerical values of internal irradiation dose of thyroid gland. The choice of hazard-levels giving the foundation for making decision concerning protection measures should be determined both by biological radiation risk and scale of hazard relative protection urgebcy the degree of accuracy of potential irradiation or contamination evaluation by possibilities of measures carried out in time, difficulties, unfavourable psychologic effect and risk for population health. The criterion should permit flexibility in decision making according to concrete conditions

Mei Symmetry and New Conserved Quantities of Tzénoff Equations for the Variable Mass Higher-Order Nonholonomic System

International Nuclear Information System (INIS)

Zheng Shi-Wang; Wang Jian-Bo; Chen Xiang-Wei; Xie Jia-Fang

2012-01-01

Operational systems of spacecraft are general variable mass mechanics systems, and their symmetries and conserved quantities imply profound physical rules of the space system. We study the Mei symmetry of Tzénoff equations for a variable mass nonholonomic system and the new conserved quantities derived. The function expression of the new conserved quantities and the criterion equation which deduces these conserved quantities are presented. This result has some theoretical values in further research of conservation laws obeyed by the variable mass system. (general)

Focused information criterion and model averaging based on weighted composite quantile regression

KAUST Repository

Xu, Ganggang; Wang, Suojin; Huang, Jianhua Z.

2013-01-01

We study the focused information criterion and frequentist model averaging and their application to post-model-selection inference for weighted composite quantile regression (WCQR) in the context of the additive partial linear models. With the non

Maps of mesoscale wind variability over the North Sea region

DEFF Research Database (Denmark)

Vincent, Claire Louise; Hahmann, Andrea N.; Badger, Jake

Mesoscale wind fluctuations affect the operation of wind farms, particularly as the number of geographically concentrated wind farms in the North Sea increases (Akhmatov et al. 2007). The frequency and intensity of wind fluctuations could be considered as a new siting criterion, together with exi...... for a 1 year period. The model was run with a horizontal grid spacing of 2 km. The variability maps are created by integrating the average 24 hour spectra at every grid point over different time-scales....

Relevant Scatterers Characterization in SAR Images

Science.gov (United States)

Chaabouni, Houda; Datcu, Mihai

2006-11-01

Recognizing scenes in a single look meter resolution Synthetic Aperture Radar (SAR) images, requires the capability to identify relevant signal signatures in condition of variable image acquisition geometry, arbitrary objects poses and configurations. Among the methods to detect relevant scatterers in SAR images, we can mention the internal coherence. The SAR spectrum splitted in azimuth generates a series of images which preserve high coherence only for particular object scattering. The detection of relevant scatterers can be done by correlation study or Independent Component Analysis (ICA) methods. The present article deals with the state of the art for SAR internal correlation analysis and proposes further extensions using elements of inference based on information theory applied to complex valued signals. The set of azimuth looks images is analyzed using mutual information measures and an equivalent channel capacity is derived. The localization of the "target" requires analysis in a small image window, thus resulting in imprecise estimation of the second order statistics of the signal. For a better precision, a Hausdorff measure is introduced. The method is applied to detect and characterize relevant objects in urban areas.

Reliability and criterion validity of an observation protocol for working technique assessments in cash register work.

Science.gov (United States)

Palm, Peter; Josephson, Malin; Mathiassen, Svend Erik; Kjellberg, Katarina

2016-06-01

We evaluated the intra- and inter-observer reliability and criterion validity of an observation protocol, developed in an iterative process involving practicing ergonomists, for assessment of working technique during cash register work for the purpose of preventing upper extremity symptoms. Two ergonomists independently assessed 17 15-min videos of cash register work on two occasions each, as a basis for examining reliability. Criterion validity was assessed by comparing these assessments with meticulous video-based analyses by researchers. Intra-observer reliability was acceptable (i.e. proportional agreement >0.7 and kappa >0.4) for 10/10 questions. Inter-observer reliability was acceptable for only 3/10 questions. An acceptable inter-observer reliability combined with an acceptable criterion validity was obtained only for one working technique aspect, 'Quality of movements'. Thus, major elements of the cashiers' working technique could not be assessed with an acceptable accuracy from short periods of observations by one observer, such as often desired by practitioners. Practitioner Summary: We examined an observation protocol for assessing working technique in cash register work. It was feasible in use, but inter-observer reliability and criterion validity were generally not acceptable when working technique aspects were assessed from short periods of work. We recommend the protocol to be used for educational purposes only.

Soil variability in mountain areas

OpenAIRE

Zanini, E.; Freppaz, M.; Stanchi, S.; Bonifacio, E.; Egli, M.

2015-01-01

The high spatial variability of soils is a relevant issue at local and global scales, and determines the complexity of soil ecosystem functions and services. This variability derives from strong dependencies of soil ecosystems on parent materials, climate, relief and biosphere, including human impact. Although present in all environments, the interactions of soils with these forming factors are particularly striking in mountain areas.

Compliance of the Vaalputs national radioactive waste disposal facility to a frequency-magnitude release criterion as required for licensing

International Nuclear Information System (INIS)

Adrian, H.W.W.; Gerber, H.H.; Kruger, J.; Weygand, J.

1986-01-01

Accidental releases of radioactivity from the Vaalputs nuclear waste repository have been quantified and release frequencies have been attached to a number of accident scenarios of human or natural origin. These have then been compared to a frequency-magnitude release criterion according to South African licensing requirements. It was shown that the criterion was applicable in three release bands. In two of these the criterion was met by some orders of magnitude. In the third band the permitted release frequency was a factor 55 below the limit in spite of pessimistic release assumptions

A psychometric evaluation of the DSM-IV borderline personality disorder criteria: age and sex moderation of criterion functioning

Science.gov (United States)

Aggen, S. H.; Neale, M. C.; Røysamb, E.; Reichborn-Kjennerud, T.; Kendler, K. S.

2009-01-01

Background Despite its importance as a paradigmatic personality disorder, little is known about the measurement invariance of the DSM-IV borderline personality disorder (BPD) criteria ; that is, whether the criteria assess the disorder equivalently across different groups. Method BPD criteria were evaluated at interview in 2794 young adult Norwegian twins. Analyses, based on item-response modeling, were conducted to test for differential age and sex moderation of the individual BPD criteria characteristics given factor-level covariate effects. Results Confirmatory factor analytic results supported a unidimensional structure for the nine BPD criteria. Compared to males, females had a higher BPD factor mean, larger factor variance and there was a significant age by sex interaction on the factor mean. Strong differential sex and age by sex interaction effects were found for the ‘ impulsivity ’ criterion factor loading and threshold. Impulsivity related to the BPD factor poorly in young females but improved significantly in older females. Males reported more impulsivity compared to females and this difference increased with age. The ‘ affective instability ’ threshold was also moderated, with males reporting less than expected. Conclusions The results suggest the DSM-IV BPD ‘ impulsivity ’ and ‘ affective instability ’ criteria function differentially with respect to age and sex, with impulsivity being especially problematic. If verified, these findings have important implications for the interpretation of prior research with these criteria. These non-invariant age and sex effects may be identifying criteria-level expression features relevant to BPD nosology and etiology. Criterion functioning assessed using modern psychometric methods should be considered in the development of DSM-V. PMID:19400977

An extended geometric criterion for chaos in the Dicke model

International Nuclear Information System (INIS)

Li Jiangdan; Zhang Suying

2010-01-01

We extend HBLSL's (Horwitz, Ben Zion, Lewkowicz, Schiffer and Levitan) new Riemannian geometric criterion for chaotic motion to Hamiltonian systems of weak coupling of potential and momenta by defining the 'mean unstable ratio'. We discuss the Dicke model of an unstable Hamiltonian system in detail and show that our results are in good agreement with that of the computation of Lyapunov characteristic exponents.

A study on the instability criterion for the stratified flow in horizontal pipe at cocurrent flow conditions

Energy Technology Data Exchange (ETDEWEB)

Sung, Chang Kyung [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1998-12-31

This paper presents a theoretical approach of the instability criterion from stratified to nonstratified flow in horizontal pipe at cocurrent flow conditions. The new theoretical instability criterion for the stratified and nonstratified flow transition in horizontal pipe has been developed by hyperbolic equations in two-phase flow. Critical flow condition criterion and onset of slugging at cocurrent flow condition correspond to zero and imaginary characteristics which occur when the hyperbolicity of a stratified two-phase flow is broken, respectively. Through comparison between results predicted by the present flow is broken, respectively. Through comparison between results predicted by the present theory and the Kukita et al. [1] experimental data of pipes, it is shown that they are in good agreement with data. 4 refs., 2 figs. (Author)

A study on the instability criterion for the stratified flow in horizontal pipe at cocurrent flow conditions

Energy Technology Data Exchange (ETDEWEB)

Sung, Chang Kyung [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1997-12-31

This paper presents a theoretical approach of the instability criterion from stratified to nonstratified flow in horizontal pipe at cocurrent flow conditions. The new theoretical instability criterion for the stratified and nonstratified flow transition in horizontal pipe has been developed by hyperbolic equations in two-phase flow. Critical flow condition criterion and onset of slugging at cocurrent flow condition correspond to zero and imaginary characteristics which occur when the hyperbolicity of a stratified two-phase flow is broken, respectively. Through comparison between results predicted by the present flow is broken, respectively. Through comparison between results predicted by the present theory and the Kukita et al. [1] experimental data of pipes, it is shown that they are in good agreement with data. 4 refs., 2 figs. (Author)

Corrections for criterion reliability in validity generalization: The consistency of Hermes, the utility of Midas

Directory of Open Access Journals (Sweden)

Jesús F. Salgado

2016-04-01

Full Text Available There is criticism in the literature about the use of interrater coefficients to correct for criterion reliability in validity generalization (VG studies and disputing whether .52 is an accurate and non-dubious estimate of interrater reliability of overall job performance (OJP ratings. We present a second-order meta-analysis of three independent meta-analytic studies of the interrater reliability of job performance ratings and make a number of comments and reflections on LeBreton et al.s paper. The results of our meta-analysis indicate that the interrater reliability for a single rater is .52 (k = 66, N = 18,582, SD = .105. Our main conclusions are: (a the value of .52 is an accurate estimate of the interrater reliability of overall job performance for a single rater; (b it is not reasonable to conclude that past VG studies that used .52 as the criterion reliability value have a less than secure statistical foundation; (c based on interrater reliability, test-retest reliability, and coefficient alpha, supervisor ratings are a useful and appropriate measure of job performance and can be confidently used as a criterion; (d validity correction for criterion unreliability has been unanimously recommended by "classical" psychometricians and I/O psychologists as the proper way to estimate predictor validity, and is still recommended at present; (e the substantive contribution of VG procedures to inform HRM practices in organizations should not be lost in these technical points of debate.

A convenient accuracy criterion for time domain FE-calculations

DEFF Research Database (Denmark)

Jensen, Morten Skaarup

1997-01-01

An accuracy criterion that is well suited to tome domain finite element (FE) calculations is presented. It is then used to develop a method for selecting time steps and element meshes that produce accurate results without significantly overburderning the computer. Use of this method is illustrated...... with a simple example, where comparison with an analytical solution shows that results are sufficiently accurate, which is not always the case with more primitive mthods for determining the discretisation....

Validation of a Criterion Referenced Test for Young Handicapped Children: PIPER.

Science.gov (United States)

Strum, Irene; Shapiro, Madelaine

The purpose of this study was to validate the Prescriptive Instructional Program for Educational Readiness (PIPER) for utilization as a criterion referenced test (CRT) among learning disabled children. The program consisted of behavioral objectives and diagnostic and/or mastery tasks and activities for each objective in the area of gross motor…

Evaluation of Self-Perceptions of Creativity: Is It a Useful Criterion?

Science.gov (United States)

Reiter-Palmon, Roni; Robinson-Morral, Erika J.; Kaufman, James C.; Santo, Jonathan B.

2012-01-01

Self-evaluations or self-perceptions of creativity have been used in the past both as predictors of creative performance and as criteria. Four measures utilizing self-perceptions of creativity were assessed for their usefulness as criterion measures of creativity. Analyses provided evidence of domain specificity of self-perceptions. The scales…

Discussion on verification criterion and method of human factors engineering for nuclear power plant controller

International Nuclear Information System (INIS)

Yang Hualong; Liu Yanzi; Jia Ming; Huang Weijun

2014-01-01

In order to prevent or reduce human error and ensure the safe operation of nuclear power plants, control device should be verified from the perspective of human factors engineering (HFE). The domestic and international human factors engineering guidelines about nuclear power plant controller were considered, the verification criterion and method of human factors engineering for nuclear power plant controller were discussed and the application examples were provided for reference in this paper. The results show that the appropriate verification criterion and method should be selected to ensure the objectivity and accuracy of the conclusion. (authors)

Application of Discriminant Analysis on Romanian Insurance Market

Directory of Open Access Journals (Sweden)

Constantin Anghelache

2008-11-01

Full Text Available Discriminant analysis is a supervised learning technique that can be used in order to determine which variables are the best predictors of the classification of objects belonging to a population into predetermined classes. At the same time, discriminant analysis provides a powerful tool that enables researchers to make predictions regarding the classification of new objects into predefined classes. The main goal of discriminant analysis is to determine which of the N descriptive variables have the most discriminatory power, that is, which of them are the most relevant for the classification of objects into classes. In order to classify objects, we need a mathematical model that provides the rules for optimal allocation. This is the classifier. In this paper we will discuss three of the most important models of classification: the Bayesian criterion, the Mahalanobis criterion and the Fisher criterion. In this paper, we will use discriminant analysis to classify the insurance companies that operated on the Romanian market in 2006. We have selected a number of eigth (8 relevant variables: gross written premium (GR_WRI_PRE, net mathematical reserves (NET_M_PES, gross claims paid (GR_CL_PAID, net premium reserves (NET_PRE_RES, net claim reserves (NET_CL_RES, net income (NE—_INCOME, share capital (SHARE_CAP and gross written premium ceded in Reinsurance (GR_WRI_PRE_CED. Before proceeding to discriminant analysis, we performed cluster analysis on the initial data in order to identify classes (clusters that emerge from the data.

Optimization of equivalent uniform dose using the L-curve criterion

International Nuclear Information System (INIS)

Chvetsov, Alexei V; Dempsey, James F; Palta, Jatinder R

2007-01-01

Optimization of equivalent uniform dose (EUD) in inverse planning for intensity-modulated radiation therapy (IMRT) prevents variation in radiobiological effect between different radiotherapy treatment plans, which is due to variation in the pattern of dose nonuniformity. For instance, the survival fraction of clonogens would be consistent with the prescription when the optimized EUD is equal to the prescribed EUD. One of the problems in the practical implementation of this approach is that the spatial dose distribution in EUD-based inverse planning would be underdetermined because an unlimited number of nonuniform dose distributions can be computed for a prescribed value of EUD. Together with ill-posedness of the underlying integral equation, this may significantly increase the dose nonuniformity. To optimize EUD and keep dose nonuniformity within reasonable limits, we implemented into an EUD-based objective function an additional criterion which ensures the smoothness of beam intensity functions. This approach is similar to the variational regularization technique which was previously studied for the dose-based least-squares optimization. We show that the variational regularization together with the L-curve criterion for the regularization parameter can significantly reduce dose nonuniformity in EUD-based inverse planning

Optimization of equivalent uniform dose using the L-curve criterion

Energy Technology Data Exchange (ETDEWEB)

Chvetsov, Alexei V; Dempsey, James F; Palta, Jatinder R [Department of Radiation Oncology, University of Florida, Gainesville, FL 32610-0385 (United States)

2007-09-21

Optimization of equivalent uniform dose (EUD) in inverse planning for intensity-modulated radiation therapy (IMRT) prevents variation in radiobiological effect between different radiotherapy treatment plans, which is due to variation in the pattern of dose nonuniformity. For instance, the survival fraction of clonogens would be consistent with the prescription when the optimized EUD is equal to the prescribed EUD. One of the problems in the practical implementation of this approach is that the spatial dose distribution in EUD-based inverse planning would be underdetermined because an unlimited number of nonuniform dose distributions can be computed for a prescribed value of EUD. Together with ill-posedness of the underlying integral equation, this may significantly increase the dose nonuniformity. To optimize EUD and keep dose nonuniformity within reasonable limits, we implemented into an EUD-based objective function an additional criterion which ensures the smoothness of beam intensity functions. This approach is similar to the variational regularization technique which was previously studied for the dose-based least-squares optimization. We show that the variational regularization together with the L-curve criterion for the regularization parameter can significantly reduce dose nonuniformity in EUD-based inverse planning.

Optimization of equivalent uniform dose using the L-curve criterion.

Science.gov (United States)

Chvetsov, Alexei V; Dempsey, James F; Palta, Jatinder R

2007-10-07

Optimization of equivalent uniform dose (EUD) in inverse planning for intensity-modulated radiation therapy (IMRT) prevents variation in radiobiological effect between different radiotherapy treatment plans, which is due to variation in the pattern of dose nonuniformity. For instance, the survival fraction of clonogens would be consistent with the prescription when the optimized EUD is equal to the prescribed EUD. One of the problems in the practical implementation of this approach is that the spatial dose distribution in EUD-based inverse planning would be underdetermined because an unlimited number of nonuniform dose distributions can be computed for a prescribed value of EUD. Together with ill-posedness of the underlying integral equation, this may significantly increase the dose nonuniformity. To optimize EUD and keep dose nonuniformity within reasonable limits, we implemented into an EUD-based objective function an additional criterion which ensures the smoothness of beam intensity functions. This approach is similar to the variational regularization technique which was previously studied for the dose-based least-squares optimization. We show that the variational regularization together with the L-curve criterion for the regularization parameter can significantly reduce dose nonuniformity in EUD-based inverse planning.

A proposed risk acceptance criterion for nuclear fuel waste disposal

International Nuclear Information System (INIS)

Mehta, K.

1985-06-01

The need to establish a radiological protection criterion that applies specifically to disposal of high level nuclear fuel wastes arises from the difficulty of applying the present ICRP recommendations. These recommendations apply to situations in which radiological detriment can be actively controlled, while a permanent waste disposal facility is meant to operate without the need for corrective actions. Also, the risks associated with waste disposal depend on events and processes that have various probabilities of occurrence. In these circumstances, it is not suitable to apply standards that are based on a single dose limit as in the present ICRP recommendations, because it will generally be possible to envisage events, perhaps rare, that would lead to doses above any selected limit. To overcome these difficulties, it is proposed to base a criterion for acceptability on a set of dose values and corresponding limiting values of probabilities; this set of values constitutes a risk-limit line. A risk-limit line suitable for waste disposal is proposed that has characteristics consistent with the basic philosophy of the ICRP and UNSCEAR recommendations, and is based on levels on natural background radiation

Job Search and Social Cognitive Theory: The Role of Career-Relevant Activities

Science.gov (United States)

Zikic, Jelena; Saks, Alan M.

2009-01-01

Social cognitive theory was used to explain the relationships between career-relevant activities (environmental and self career exploration, career resources, and training), self-regulatory variables (job search self-efficacy and job search clarity), variables from the Theory of Planned Behavior (job search attitude, subjective norm, job search…

Unit rupture work as a criterion for quantitative estimation of hardenability in steel

International Nuclear Information System (INIS)

Kramarov, M.A.; Orlov, E.D.; Rybakov, A.B.

1980-01-01

Shown is possible utilization of high sensitivity of resistance to fracture of structural steel to the hardenability degree in the course of hardening to find the quantitative estimation of the latter one. Proposed is a criterion kappa, the ratio of the unit rupture work in the case of incomplete hardenability (asub(Tsub(ih))) under investigation, and the analoguc value obtained in the case of complete hardenability Asub(Tsub(Ch)) at the testing temperature corresponding to the critical temperature Tsub(100(M). Confirmed is high criterion sensitivity of the hardened steel structure on the basis of experimental investigation of the 40Kh, 38KhNM and 38KhNMFA steels after isothermal hold-up at different temperatures, corresponding to production of various products of austenite decomposition

A relaxed criterion for contraction theory: application to an underwater vehicle observer

DEFF Research Database (Denmark)

Jouffroy, Jerome

the Jacobian is not uniformly negative definite but fulfils some weaker conditions. Intended as an illustrative example, a nonlinear underwater vehicle observer, which Jacobian is not uniformly negative definite, is presented and proven to be exponentially convergent using the new criterion....

Criterion of magnetic saturation and simulation of nonlinear magnetization for a linear multi-core pulse transformer

International Nuclear Information System (INIS)

Zeng Zhengzhong; Kuai Bin; Sun Fengju; Cong Peitian; Qiu Aici

2002-01-01

The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasm owing to its compact, relatively low-cost and easy-to-handle characteristics. The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design, because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation. This work proposes analytical formulas of the criterion of magnetic saturation for the cores when the transformer drives practical loads. Furthermore, an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores. The numerical simulation with the model is used to evaluate the validity of the criterion. Both the criterion and the model are found to be in agreement with the experimental data

PET image reconstruction: mean, variance, and optimal minimax criterion

International Nuclear Information System (INIS)

Liu, Huafeng; Guo, Min; Gao, Fei; Shi, Pengcheng; Xue, Liying; Nie, Jing

2015-01-01

Given the noise nature of positron emission tomography (PET) measurements, it is critical to know the image quality and reliability as well as expected radioactivity map (mean image) for both qualitative interpretation and quantitative analysis. While existing efforts have often been devoted to providing only the reconstructed mean image, we present a unified framework for joint estimation of the mean and corresponding variance of the radioactivity map based on an efficient optimal min–max criterion. The proposed framework formulates the PET image reconstruction problem to be a transformation from system uncertainties to estimation errors, where the minimax criterion is adopted to minimize the estimation errors with possibly maximized system uncertainties. The estimation errors, in the form of a covariance matrix, express the measurement uncertainties in a complete way. The framework is then optimized by ∞-norm optimization and solved with the corresponding H ∞ filter. Unlike conventional statistical reconstruction algorithms, that rely on the statistical modeling methods of the measurement data or noise, the proposed joint estimation stands from the point of view of signal energies and can handle from imperfect statistical assumptions to even no a priori statistical assumptions. The performance and accuracy of reconstructed mean and variance images are validated using Monte Carlo simulations. Experiments on phantom scans with a small animal PET scanner and real patient scans are also conducted for assessment of clinical potential. (paper)

The alternative DSM-5 personality disorder traits criterion

DEFF Research Database (Denmark)

Bach, Bo; Maples-Keller, Jessica L; Bo, Sune

2016-01-01

The fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5; American Psychiatric Association, 2013a) offers an alternative model for Personality Disorders (PDs) in Section III, which consists in part of a pathological personality traits criterion measured...... with the Personality Inventory for DSM-5 (PID-5). The PID-5 selfreport instrument currently exists in the original 220-item form, a short 100-item form, and a brief 25-item form. For clinicians and researchers, the choice of a particular PID- 5 form depends on feasibility, but also reliability and validity. The goal...

Fretting-wear damage of heat exchanger tubes: a proposed damage criterion based on tube vibration response

International Nuclear Information System (INIS)

Yetisir, M.; McKerrow, E.; Pettigrew, M.J.

1997-01-01

A simple criterion is proposed to estimate fretting-wear damage in heat exchanger tubes with clearance supports. The criterion is based on parameters such as vibration frequency, mid-span vibration amplitude, span length, tube mass and an empirical wear coefficient. It is generally accepted that fretting-wear damage is proportional to a parameter called work-rate. Work-rate is a measure of the dynamic interaction between a vibrating tube and its supports. Due to the complexity of the impact-sliding behavior at the clearance-supports, work-rate calculations for heat exchanger tubes require specialized non-linear finite element codes. These codes include contact models for various clearance-support geometries. Such non-linear finite element analyses are complex, expensive and time consuming. The proposed criterion uses the results of linear vibration analysis (i.e., vibration frequency and mid-span vibration amplitude due to turbulence) and does not require a non-linear analysis. It can be used by non-specialists for a quick evaluation of the expected work-rate, and hence, the fretting-wear damage of heat exchanger tubes. The proposed criterion was obtained from an extensive parametric study that was conducted using a non-linear finite element program. It is shown that, by using the proposed work-rate criteria, work-rate can be estimated within a factor of two. This result, however, requires further testing with more complicated flow patterns. (author)

A PANEL REGRESSION ANALYSIS OF HUMAN CAPITAL RELEVANCE IN SELECTED SCANDINAVIAN AND SE EUROPEAN COUNTRIES

Directory of Open Access Journals (Sweden)

Filip Kokotovic

2016-06-01

Full Text Available The study of human capital relevance to economic growth is becoming increasingly important taking into account its relevance in many of the Sustainable Development Goals proposed by the UN. This paper conducted a panel regression analysis of selected SE European countries and Scandinavian countries using the Granger causality test and pooled panel regression. In order to test the relevance of human capital on economic growth, several human capital proxy variables were identified. Aside from the human capital proxy variables, other explanatory variables were selected using stepwise regression while the dependant variable was GDP. This paper concludes that there are significant structural differences in the economies of the two observed panels. Of the human capital proxy variables observed, for the panel of SE European countries only life expectancy was statistically significant and it had a negative impact on economic growth, while in the panel of Scandinavian countries total public expenditure on education had a statistically significant positive effect on economic growth. Based upon these results and existing studies, this paper concludes that human capital has a far more significant impact on economic growth in more developed economies.

Playing up and playing down cultural identity: Introducing cultural influence and cultural variability.

Science.gov (United States)

Ferguson, Gail M; Nguyen, Jacqueline; Iturbide, Maria I

2017-01-01

Cultural variability (CV) is introduced as an overlooked dimension of cultural identity development pertaining to emphasizing and de-emphasizing the influence of a single cultural identity (i.e., cultural influence [CI]) on daily interactions and behaviors. The Cultural IDentity Influence Measure (CIDIM) is introduced as a novel measure of CI and CV, and hypothesis-driven validation is conducted in two samples along with exploration of associations between CV and well-being. A multicultural sample of 242 emerging adults participated in a daily diary study (Mage = 19.95 years, SDage = 1.40) by completing up to eight daily online surveys containing the CIDIM, criterion measures (ethnic identity, other group orientation, ethnic identity salience and daily variability in salience, social desirability), and measures of personal and interpersonal well-being. A second validation sample (n = 245) completed a 1-time survey with the CIDIM and a subset of criterion measures. Results using both samples show evidence of CI and CV and demonstrate the validity, reliability, and domain-sensitivity of the CIDIM. Further, CV made unique and positive contributions to predicting interaction quality after accounting for ethnic salience and variability in ethnic salience. An analytic approach utilizing standard deviations produced near-identical results to multilevel modeling and is recommended for parsimony. Ethnic minority and majority individuals make daily adjustments to play up and play down the influence of cultural identity on their social interactions and behaviors, and these adjustments predict interpersonal well-being. Cultural influence and cultural variability contribute to our emerging understanding of cultural identity as dynamic and agentic. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

A ductile fracture criterion with Zener-Hollomon parameter of pure molybdenum sheet in thermal forming

Directory of Open Access Journals (Sweden)

Wang Chu

2015-01-01

Full Text Available Formability of pure molybdenum in thermal forming process has been greatly improved, but it is still hard to avoid the generation of rupture and other quality defects. In this paper, a ductile fracture criterion of pure molybdenum sheet in thermal forming was established by considering the plastic deformation capacity of material and stress states, which can be used to describe fracture behaviour and critical rupture prediction of pure molybdenum sheet during hot forming process. Based on the isothermal uniaxial tensile tests which performed at 993 to 1143 K with strain rate range from 0.0005 to 0.2 s−1, the material parameters are calculated by the combination method of experiment with FEsimulation. Based on the observation, new fracture criteria can be expressed as a function of Zener-Hollomon parameter. The critical fracture value that calculated by Oyane-Sato criterion increases with increasing temperature and decreasing strain rate. The ductile fracture criterion with Zener-Hollomon parameter of pure molybdenum in thermal forming is proposed.

A new self-report inventory of dyslexia for students: criterion and construct validity.

Science.gov (United States)

Tamboer, Peter; Vorst, Harrie C M

2015-02-01

The validity of a Dutch self-report inventory of dyslexia was ascertained in two samples of students. Six biographical questions, 20 general language statements and 56 specific language statements were based on dyslexia as a multi-dimensional deficit. Dyslexia and non-dyslexia were assessed with two criteria: identification with test results (Sample 1) and classification using biographical information (both samples). Using discriminant analyses, these criteria were predicted with various groups of statements. All together, 11 discriminant functions were used to estimate classification accuracy of the inventory. In Sample 1, 15 statements predicted the test criterion with classification accuracy of 98%, and 18 statements predicted the biographical criterion with classification accuracy of 97%. In Sample 2, 16 statements predicted the biographical criterion with classification accuracy of 94%. Estimations of positive and negative predictive value were 89% and 99%. Items of various discriminant functions were factor analysed to find characteristic difficulties of students with dyslexia, resulting in a five-factor structure in Sample 1 and a four-factor structure in Sample 2. Answer bias was investigated with measures of internal consistency reliability. Less than 20 self-report items are sufficient to accurately classify students with and without dyslexia. This supports the usefulness of self-assessment of dyslexia as a valid alternative to diagnostic test batteries. Copyright © 2015 John Wiley & Sons, Ltd.

Optimal design of constant-stress accelerated degradation tests using the M-optimality criterion

International Nuclear Information System (INIS)

Wang, Han; Zhao, Yu; Ma, Xiaobing; Wang, Hongyu

2017-01-01

In this paper, we propose the M-optimality criterion for designing constant-stress accelerated degradation tests (ADTs). The newly proposed criterion concentrates on the degradation mechanism equivalence rather than evaluation precision or prediction accuracy which is usually considered in traditional optimization criteria. Subject to the constraints of total sample number, test termination time as well as the stress region, an optimum constant-stress ADT plan is derived by determining the combination of stress levels and the number of samples allocated to each stress level, when the degradation path comes from inverse Gaussian (IG) process model with covariates and random effects. A numerical example is presented to verify the robustness of our proposed optimum plan and compare its efficiency with other test plans. Results show that, with a slightly relaxed requirement of evaluation precision and prediction accuracy, our proposed optimum plan reduces the dispersion of the estimated acceleration factor between the usage stress level and a higher accelerated stress level, which makes an important contribution to reliability demonstration and assessment tests. - Highlights: • We establish the necessary conditions for degradation mechanism equivalence of ADTs. • We propose the M-optimality criterion for designing constant-stress ADT plans. • The M-optimality plan reduces the dispersion of the estimated accelerated factors. • An electrical connector with its stress relaxation data is used for illustration.

A study of variable thrust, variable specific impulse trajectories for solar system exploration

Science.gov (United States)

Sakai, Tadashi

A study has been performed to determine the advantages and disadvantages of variable thrust and variable Isp (specific impulse) trajectories for solar system exploration. There have been several numerical research efforts for variable thrust, variable Isp, power-limited trajectory optimization problems. All of these results conclude that variable thrust, variable Isp (variable specific impulse, or VSI) engines are superior to constant thrust, constant Isp (constant specific impulse; or CSI) engines. However, most of these research efforts assume a mission from Earth to Mars, and some of them further assume that these planets are circular and coplanar. Hence they still lack the generality. This research has been conducted to answer the following questions: (1) Is a VSI engine always better than a CSI engine or a high thrust engine for any mission to any planet with any time of flight considering lower propellant mass as the sole criterion? (2) If a planetary swing-by is used for a VSI trajectory, is the fuel savings of a VSI swing-by trajectory better than that of a CSI swing-by or high thrust swing-by trajectory? To support this research, an unique, new computer-based interplanetary trajectory calculation program has been created. This program utilizes a calculus of variations algorithm to perform overall optimization of thrust, Isp, and thrust vector direction along a trajectory that minimizes fuel consumption for interplanetary travel. It is assumed that the propulsion system is power-limited, and thus the compromise between thrust and Isp is a variable to be optimized along the flight path. This program is capable of optimizing not only variable thrust trajectories but also constant thrust trajectories in 3-D space using a planetary ephemeris database. It is also capable of conducting planetary swing-bys. Using this program, various Earth-originating trajectories have been investigated and the optimized results have been compared to traditional CSI and high

A theoretical derivation of the Hoek–Brown failure criterion for rock materials

Directory of Open Access Journals (Sweden)

Jianping Zuo

2015-08-01

Full Text Available This study uses a three-dimensional crack model to theoretically derive the Hoek–Brown rock failure criterion based on the linear elastic fracture theory. Specifically, we argue that a failure characteristic factor needs to exceed a critical value when macro-failure occurs. This factor is a product of the micro-failure orientation angle (characterizing the density and orientation of damaged micro-cracks and the changing rate of the angle with respect to the major principal stress (characterizing the microscopic stability of damaged cracks. We further demonstrate that the factor mathematically leads to the empirical Hoek–Brown rock failure criterion. Thus, the proposed factor is able to successfully relate the evolution of microscopic damaged crack characteristics to macro-failure. Based on this theoretical development, we also propose a quantitative relationship between the brittle–ductile transition point and confining pressure, which is consistent with experimental observations.

High performance continuously variable transmission control through robust-control-relevant model validation

NARCIS (Netherlands)

Oomen, T.A.E.; Meulen, van der S.H.

2013-01-01

Optimal operation of continuously variable transmissions (CVTs) is essential to meet tightening emission and fuel consumption requirements. This is achieved by accurately tracking a prescribed transmission ratio reference and simultaneously optimizing the internal efficiency of the CVT. To reduce

The Obstruction criterion for non existence of Invariant Circles and Renormalization.

CERN Document Server

De la Llave, R

2003-01-01

We formulate a conjecture which supplements the standard renormalization scenario for the breakdown of golden circle in twist maps. We show rigorously that if the conjecture was true then: a) The stable manifold of the non-trivial fixed point would indeed be a boundary between the existence of smooth invariant tori and hyperbolic orbits with golden mean rotation number. In particular, the boundary of the set of twist maps with a torus with a golden mean rotation number would include a smooth submanifold in the space of analytic mappings. b) The obstruction criterion of [Olvera-Simo] would be sharp in the universality class of the renormalization group. c) The criterion of [Greene-79] for existence of invariant circles if and only if there the residues of approximating orbits are finite would be valid for maps in the universality class. d) If there is no invariant circle, there are hyperbolic sets with golden mean rotation number. We also provide numerical evidence which suggests that the conjecture is true an...

Concerning a criterion for stability in the neighbourhood of the magnetic axis of revolution symmetry with an anisotropic pressure

International Nuclear Information System (INIS)

Cairo, L.

1963-01-01

A stability criterion is developed which is given by local m.h.d. CGL [2] displacements in the neighbourhood of the magnetic axis of revolution symmetry. As opposed to the case of anisotropic pressure, the criterion is found to be always valid on the magnetic axis. (author) [fr

Translating hydrologically-relevant variables from the ice sheet model SICOPOLIS to the Greenland Analog Project hydrologic modeling domain

Science.gov (United States)

Vallot, Dorothée; Applegate, Patrick; Pettersson, Rickard

2013-04-01

Projecting future climate and ice sheet development requires sophisticated models and extensive field observations. Given the present state of our knowledge, it is very difficult to say what will happen with certainty. Despite the ongoing increase in atmospheric greenhouse gas concentrations, the possibility that a new ice sheet might form over Scandinavia in the far distant future cannot be excluded. The growth of a new Scandinavian Ice Sheet would have important consequences for buried nuclear waste repositories. The Greenland Analogue Project, initiated by the Swedish Nuclear Fuel and Waste Management Company (SKB), is working to assess the effects of a possible future ice sheet on groundwater flow by studying a constrained domain in Western Greenland by field measurements (including deep bedrock drilling in front of the ice sheet) combined with numerical modeling. To address the needs of the GAP project, we interpolated results from an ensemble of ice sheet model runs to the smaller and more finely resolved modeling domain used in the GAP project's hydrologic modeling. Three runs have been chosen with three fairly different positive degree-day factors among those that reproduced the modern ice margin at the borehole position. The interpolated results describe changes in hydrologically-relevant variables over two time periods, 115 ka to 80 ka, and 20 ka to 1 ka. In the first of these time periods, the ice margin advances over the model domain; in the second time period, the ice margin retreats over the model domain. The spatially-and temporally dependent variables that we treated include the ice thickness, basal melting rate, surface mass balance, basal temperature, basal thermal regime (frozen or thawed), surface temperature, and basal water pressure. The melt flux is also calculated.

LMFBR safety criteria: cost-benefit considerations under the constraint of an a priori risk criterion

International Nuclear Information System (INIS)

Hartung, J.

1979-01-01

The role of cost-benefit considerations and a priori risk criteria as determinants of Core Disruptive Accident (CDA)-related safety criteria for large LMFBR's is explored with the aid of quantitative risk and probabilistic analysis methods. A methodology is described which allows a large number of design and siting alternatives to be traded off against each other with the goal of minimizing energy generation costs subject to the constraint of both an a priori risk criterion and a cost-benefit criterion. Application of this methodology to a specific LMFBR design project is described and the results are discussed. 5 refs

Identifying afterloading PDR and HDR brachytherapy errors using real-time fiber-coupled Al2O3:C dosimetry and a novel statistical error decision criterion

International Nuclear Information System (INIS)

Kertzscher, Gustavo; Andersen, Claus E.; Siebert, Frank-Andre; Nielsen, Soren Kynde; Lindegaard, Jacob C.; Tanderup, Kari

2011-01-01

Background and purpose: The feasibility of a real-time in vivo dosimeter to detect errors has previously been demonstrated. The purpose of this study was to: (1) quantify the sensitivity of the dosimeter to detect imposed treatment errors under well controlled and clinically relevant experimental conditions, and (2) test a new statistical error decision concept based on full uncertainty analysis. Materials and methods: Phantom studies of two gynecological cancer PDR and one prostate cancer HDR patient treatment plans were performed using tandem ring applicators or interstitial needles. Imposed treatment errors, including interchanged pairs of afterloader guide tubes and 2-20 mm source displacements, were monitored using a real-time fiber-coupled carbon doped aluminum oxide (Al 2 O 3 :C) crystal dosimeter that was positioned in the reconstructed tumor region. The error detection capacity was evaluated at three dose levels: dwell position, source channel, and fraction. The error criterion incorporated the correlated source position uncertainties and other sources of uncertainty, and it was applied both for the specific phantom patient plans and for a general case (source-detector distance 5-90 mm and position uncertainty 1-4 mm). Results: Out of 20 interchanged guide tube errors, time-resolved analysis identified 17 while fraction level analysis identified two. Channel and fraction level comparisons could leave 10 mm dosimeter displacement errors unidentified. Dwell position dose rate comparisons correctly identified displacements ≥5 mm. Conclusion: This phantom study demonstrates that Al 2 O 3 :C real-time dosimetry can identify applicator displacements ≥5 mm and interchanged guide tube errors during PDR and HDR brachytherapy. The study demonstrates the shortcoming of a constant error criterion and the advantage of a statistical error criterion.

Improved Robust Stability Criterion of Networked Control Systems with Transmission Delays and Packet Loss

Directory of Open Access Journals (Sweden)

Shenping Xiao

2014-01-01

Full Text Available The problem of stability analysis for a class of networked control systems (NCSs with network-induced delay and packet dropout is investigated in this paper. Based on the working mechanism of zero-order holder, the closed-loop NCS is modeled as a continuous-time linear system with input delay. By introducing a novel Lyapunov-Krasovskii functional which splits both the lower and upper bounds of the delay into two subintervals, respectively, and utilizes reciprocally convex combination technique, a new stability criterion is derived in terms of linear matrix inequalities. Compared with previous results in the literature, the obtained stability criterion is less conservative. Numerical examples demonstrate the validity and feasibility of the proposed method.

The implication of using ''consequences'' as a criterion for reactor design

International Nuclear Information System (INIS)

Cave, L.; Holmes, P.

1978-01-01

The influences which may necessitate closer consideration of reactor accident consequences, rather than reactor risk, as a criterion for design are examined briefly. Possible methods for reducing consequences are described and the advantages of inherent features for this purpose are discussed. The cost effectiveness of two possible methods of reducing consequences and risks is estimated. (author)

Why relevance theory is relevant for lexicography

DEFF Research Database (Denmark)

Bothma, Theo; Tarp, Sven

2014-01-01

This article starts by providing a brief summary of relevance theory in information science in relation to the function theory of lexicography, explaining the different types of relevance, viz. objective system relevance and the subjective types of relevance, i.e. topical, cognitive, situational...... that is very important for lexicography as well as for information science, viz. functional relevance. Since all lexicographic work is ultimately aimed at satisfying users’ information needs, the article then discusses why the lexicographer should take note of all these types of relevance when planning a new...... dictionary project, identifying new tasks and responsibilities of the modern lexicographer. The article furthermore discusses how relevance theory impacts on teaching dictionary culture and reference skills. By integrating insights from lexicography and information science, the article contributes to new...

Anàlisi de classificació amb variable «criteri» a SPAD

Directory of Open Access Journals (Sweden)

Angelina Sánchez Martí

2018-01-01

Full Text Available This article presents the characteristics, procedure and utility of the technique of classification analysis with criterion variable in a large set of data, using mainly categorical variables. Classification analysis forms part of the techniques commonly known as data mining that analyse relationships or associations between variables. The paper describes step by step how to apply this statistical technique with the support of SPAD software, a statistical package for multivariate analysis, and provides an example of its application. The technique is drawn from the French school of statistics. Despite being little known, it is a very useful classification analysis for working with large amounts of data, a situation that is increasingly common in educational research, and more typical of the secondary analyses that are carried out in our field.

Observation of strong continuous-variable Einstein-Podolsky-Rosen entanglement using shaped local oscillators

Science.gov (United States)

Shinjo, Ami; Hashiyama, Naoyuki; Koshio, Akane; Eto, Yujiro; Hirano, Takuya

2016-10-01

The continuous-variable (CV) Einstein-Podolsky-Rosen (EPR) paradox and steering are demonstrated using a pulsed light source and waveguides. We shorten the duration of the local oscillator (LO) pulse by using parametric amplification to improve the temporal mode-matching between the entangled pulse and the LO pulse. After correcting for the amplifier noise, the product of the measured conditional variance of the quadrature-phase amplitudes is 0.74 EPR-Reid criterion.

Reviewing Employee Turnover: Focusing on Proximal Withdrawal States and an Expanded Criterion

Science.gov (United States)

Hom, Peter W.; Mitchell, Terence R.; Lee, Thomas W.; Griffeth, Rodger W.

2012-01-01

We reconceptualize employee turnover to promote researchers' understanding and prediction of why employees quit or stay in employing institutions. A literature review identifies shortcomings with prevailing turnover dimensions. In response, we expand the conceptual domain of the turnover criterion to include multiple types of turnover (notably,…

Criterion validity of the Physical Activity Scale (PAS2) in Danish adults

DEFF Research Database (Denmark)

Lunde Pedersen, Eva Sophie; Mortensen, L H; Brage, S

2017-01-01

BACKGROUND: The Physical Activity Scale (PAS2) was developed to measure physical activity (PA) during work, transportation and leisure time, in the Danish adult population. The objective of this study was to assess the criterion validity of PAS2 against a combined accelerometer and heart rate mon...

Focused information criterion and model averaging based on weighted composite quantile regression

KAUST Repository

Xu, Ganggang

2013-08-13

We study the focused information criterion and frequentist model averaging and their application to post-model-selection inference for weighted composite quantile regression (WCQR) in the context of the additive partial linear models. With the non-parametric functions approximated by polynomial splines, we show that, under certain conditions, the asymptotic distribution of the frequentist model averaging WCQR-estimator of a focused parameter is a non-linear mixture of normal distributions. This asymptotic distribution is used to construct confidence intervals that achieve the nominal coverage probability. With properly chosen weights, the focused information criterion based WCQR estimators are not only robust to outliers and non-normal residuals but also can achieve efficiency close to the maximum likelihood estimator, without assuming the true error distribution. Simulation studies and a real data analysis are used to illustrate the effectiveness of the proposed procedure. © 2013 Board of the Foundation of the Scandinavian Journal of Statistics..

Application of a new criterion for assessing the susceptibility to internal erosion

Energy Technology Data Exchange (ETDEWEB)

Li, M.; Garner, S.J. [BC Hydro, Burnaby, BC (Canada); Fannin, R.J. [British Columbia Univ., Vancouver, BC (Canada)

2009-07-01

Occasionally, internal erosion can occur in internally unstable soils that are subject to seepage flow. This paper presented a modification to the Kenney-Lau criterion for assessing susceptibility to internal erosion in widely-graded cohesionless soils. The original Kenney-Lau criterion and the newly-proposed Li-Fannin criteria were both used to evaluate the grading stability of filter and core materials from two zoned earthfill dams in British Columbia. Using a statistical approach, the criteria were applied to construction data to account for the many gradation curves available within the specification envelope for materials used in construction. The paper discussed the implications of the findings within the context of laboratory permeameter tests on the same soils, and also based on a sinkhole incident at one of the dams. It was concluded that the Kenney-Lau method appears to be less conservative for predicting the internal instability of widely graded materials. 16 refs., 5 figs.

Criterion Validity of the Child's Challenging Behavior Scale, Version 2 (CCBS-2).

Science.gov (United States)

Bourke-Taylor, Helen M; Cordier, Reinie; Pallant, Julie F

The Child's Challenging Behavior Scale, Version 2 (CCBS-2), measures maternal rating of a child's challenging behaviors that compromise maternal mental health. The CCBS-2, the Child Behavior Checklist (CBCL), and the Strengths and Difficulties Questionnaire (SDQ) were compared in a sample of typically developing young Australian children. Criterion validity was investigated by correlating the CCBS-2 with "gold standard" measures (CBCL and SDQ subscales). Data were collected in a cross-sectional survey of mothers (N = 336) of children ages 3-9 yr. Correlations with the CBCL externalizing subscales demonstrated moderate (ρ = .46) to strong (ρ = .66) correlations. Correlations with the SDQ externalizing behaviors subscales were moderate (ρ = .35) to strong (ρ = .60). The criterion validity established in this study strengthens the psychometric properties that support ongoing development of the CCBS-2 as an efficient tool that may identify children in need of further evaluation. Copyright © 2018 by the American Occupational Therapy Association, Inc.

Sensor Calibration Design Based on D-Optimality Criterion

Directory of Open Access Journals (Sweden)

Hajiyev Chingiz

2016-09-01

Full Text Available In this study, a procedure for optimal selection of measurement points using the D-optimality criterion to find the best calibration curves of measurement sensors is proposed. The coefficients of calibration curve are evaluated by applying the classical Least Squares Method (LSM. As an example, the problem of optimal selection for standard pressure setters when calibrating a differential pressure sensor is solved. The values obtained from the D-optimum measurement points for calibration of the differential pressure sensor are compared with those from actual experiments. Comparison of the calibration errors corresponding to the D-optimal, A-optimal and Equidistant calibration curves is done.

Relations Between Stressors and Job Performance: An Aggregate-Level Investigation Using Multiple Criterion Measures

National Research Council Canada - National Science Library

Thomas, Jeffrey

2002-01-01

.... Army Combat Brigades. Unlike previous studies that have focused exclusively on in-role performance, we examined relations between stressors and multiple performance criterion measures, which corresponded to in-role...

Efecto de la forma de la distribución y de la media en el índice po de Huynh. [Effect of the shape of distribution and mean in Huynh’s po index

Directory of Open Access Journals (Sweden)

Gonzalo Almerich

2006-03-01

Full Text Available In the field of Educational Evaluation, the Criterion-Referenced Evaluation is a very relevant, though incipient approach. In this paper, we present a simulation study oriented to the analysis of a reliability index: the index po calculated by means of the Huynh’s method for criterion-referenced tests. The simulation study has been carried out with the aid of computer software developed ad hoc. The aim of this paper is to describe the influence of two variables – the distribution shape and the mean- on that index. The conclusion is that both variables consistently affect the reliability index. Furthermore, the obtained evidence brings relevant information about desirable metrical characteristics for applied use of the index in the criterion-referenced tests. En el ámbito de la Evaluación Educativa, la Evaluación Criterial es una corriente muy importante, aunque incipiente. En este artículo, presentamos un estudio de simulación cuyo propósito es el análisis de un índice de fiabilidad: el índice po de Huynh para pruebas de referencia criterial, El estudio de simulación se ha realizado con la ayuda de un programa de ordenador creado para tal fin. El objetivo es describir la influencia de dos variables –la forma de la distribución y la media- en este índice. La conclusión es que ambas variables están afectando consistentemente el índice de fiabilidad. Además, las evidencias obtenidas aportan información relevante sobre características métricas deseables para la posterior utilización del índice en las pruebas criteriales.

An opening criterion for dust gaps in protoplanetary discs

OpenAIRE

Dipierro, Giovanni; Laibe, Guillaume

2017-01-01

We aim to understand under which conditions a low mass planet can open a gap in viscous dusty protoplanetary discs. For this purpose, we extend the theory of dust radial drift to include the contribution from the tides of an embedded planet and from the gas viscous forces. From this formalism, we derive i) a grain size-dependent criterion for dust gap opening in discs, ii) an estimate of the location of the outer edge of the dust gap and iii) an estimate of the minimum Stokes number above whi...

Localized stability criterion for kink modes in systems with small shear

International Nuclear Information System (INIS)

Hastie, R.J.; Johnson, J.L.

1986-02-01

A localized magnetohydrodynamic stability criterion for ideal kink instabilities is determined for systems where the safety factor has a local minimum on a rational surface with no pressure gradient. These modes are stable in the cylindrical limit, but toroidal effects can make them unstable. They could provide a partial explanation for the rapid current penetration observed in tokamaks. 7 refs

Application of controllable unit approach (CUA) to performance-criterion-based nuclear material control and accounting

International Nuclear Information System (INIS)

Foster, K.W.; Rogers, D.R.

1979-01-01

The Nuclear Regulatory Commission is considering the use of maximum-loss performance criteria as a means of controlling SNM in nuclear plants. The Controllable Unit Approach to material control and accounting (CUA) was developed by Mound to determine the feasibility of controlling a plant to a performance criterion. The concept was tested with the proposed Anderson, SC, mixed-oxide plant, and it was shown that CUA is indeed a feasible method for controlling a complex process to a performance criterion. The application of CUA to an actual low-enrichment plant to assist the NRC in establishing performance criteria for uranium processes is discussed. 5 refs

System for selecting relevant information for decision support.

Science.gov (United States)

Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

2013-01-01

We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

Dilution thermodynamics of the biologically relevant cation mixtures

International Nuclear Information System (INIS)

Kaczyński, Marek; Borowik, Tomasz; Przybyło, Magda; Langner, Marek

2014-01-01

Graphical abstract: - Highlights: • Dilution energetics of Ca 2+ can be altered by the aqueous phase ionic composition. • Dissipated heat upon Ca 2+ dilution is drastically reduced in the K + presence. • Reduction of the enthalpy change upon Ca 2+ dilution is K + concentration dependent. • The cooperativity of Ca 2+ hydration might be of great biological relevance providing a thermodynamic argument for the specific ionic composition of the intracellular environment. - Abstract: The ionic composition of intracellular space is rigorously controlled by a variety of processes consuming large quantities of energy. Since the energetic efficiency is an important evolutional criterion, therefore the ion fluxes within the cell should be optimized with respect to the accompanying energy consumption. In the paper we present the experimental evidence that the dilution enthalpies of the biologically relevant ions; i.e. calcium and magnesium depend on the presence of monovalent cations; i.e. sodium and potassium. The heat flow generated during the dilution of ionic mixtures was measured with the isothermal titration calorimetry. When calcium was diluted together with potassium the dilution enthalpy was drastically reduced as the function of the potassium concentration present in the solution. No such effect was observed when the potassium ions were substituted with sodium ones. When the dilution of magnesium was investigated the dependence of the dilution enthalpy on the accompanying monovalent cation was much weaker. In order to interpret experimental evidences the ionic cluster formation is postulated. The specific organization of such cluster should depend on ions charges, sizes and organization of the hydration layers

DATA ANALYSIS BY FORMAL METHODS OF ESTIMATION OF INDEXES OF RATING CRITERION IN PROCESS OF ACCUMULATION OF DATA ABOUT WORKING OF THE TEACHING STAFF

Directory of Open Access Journals (Sweden)

Alexey E. Fedoseev

2014-01-01

Full Text Available The article considers the development of formal methods of assessing the rating criterion exponents. The article deals with the mathematical model, which allows to connect together quantitative rating criterion characteristics, measured in various scales, with intuitive idea of them. The solution to the problem of rating criterion estimation is proposed.

On the regularity criterion of weak solutions for the 3D MHD equations

Science.gov (United States)

Gala, Sadek; Ragusa, Maria Alessandra

2017-12-01

The paper deals with the 3D incompressible MHD equations and aims at improving a regularity criterion in terms of the horizontal gradient of velocity and magnetic field. It is proved that the weak solution ( u, b) becomes regular provided that ( \

Exploratory Factor Analysis of SCL90-R Symptoms Relevant to Psychosis

Directory of Open Access Journals (Sweden)

Javad Amini

2011-10-01

Full Text Available "nObjective: Inconsistent results have been reported regarding the symptom dimensions relevant to psychosis in symptoms check list revised (SCL90-R, i.e., "psychoticism" and "paranoid ideation". Therefore, some studies have suggested different factor structures for questions of these two dimensions, and proposed two newly defined dimensions of "schizotypal signs" and "schizophrenia nuclear symptoms". We conducted an exploratory factor analysis on the items of these two dimensions in a general population sample in Iran. "nMethod: A total of 2158 subjects residing in Southern Tehran (capital of Iran were interviewed using the psychoticism and paranoid ideation questions in SCL90-R to assess severity of these symptom dimensions. Factor analysis was done through SAS 9.1.3 PROC FACTOR using Promax rotation (power=3 on the matrix of "polychoric correlations among variables" as the input data. "nResults: Two factors were retained by the proportion criterion. Considering loadings >= 0.5 as minimum criteria for factor loadings, 7 out of 10 questions  from psychoticism ,and 3 out of 6 questions from paranoid ideation were retained, and others were eliminated. The factor labels proposed by the questionnaire suited the extracted factors and were retained. Internal consistency for each of the dimensions was acceptable (Cronbach's alpha 0.7 and 0.74 for paranoid ideation and psychoticism respectively. Composite scores showed a half-normal distribution for both dimensions which is predictable for instruments that detect psychotic symptoms. "nConclusion: Results were in contrast with similar studies, and questioned them by suggesting a different factor structure obtained from a statistically large population. The population in a developing nation (Iran in this study and the socio-cultural differences in developed settings are the potential sources for discrepancies between this analysis and previous reports.

Oracle Efficient Variable Selection in Random and Fixed Effects Panel Data Models

DEFF Research Database (Denmark)

Kock, Anders Bredahl

This paper generalizes the results for the Bridge estimator of Huang et al. (2008) to linear random and fixed effects panel data models which are allowed to grow in both dimensions. In particular we show that the Bridge estimator is oracle efficient. It can correctly distinguish between relevant...... and irrelevant variables and the asymptotic distribution of the estimators of the coefficients of the relevant variables is the same as if only these had been included in the model, i.e. as if an oracle had revealed the true model prior to estimation. In the case of more explanatory variables than observations......, we prove that the Marginal Bridge estimator can asymptotically correctly distinguish between relevant and irrelevant explanatory variables. We do this without restricting the dependence between covariates and without assuming sub Gaussianity of the error terms thereby generalizing the results...

CONSTRUCTING ACCOUNTING UNCERTAINITY ESTIMATES VARIABLE

Directory of Open Access Journals (Sweden)

Nino Serdarevic

2012-10-01

Full Text Available This paper presents research results on the BIH firms’ financial reporting quality, utilizing empirical relation between accounting conservatism, generated in created critical accounting policy choices, and management abilities in estimates and prediction power of domicile private sector accounting. Primary research is conducted based on firms’ financial statements, constructing CAPCBIH (Critical Accounting Policy Choices relevant in B&H variable that presents particular internal control system and risk assessment; and that influences financial reporting positions in accordance with specific business environment. I argue that firms’ management possesses no relevant capacity to determine risks and true consumption of economic benefits, leading to creation of hidden reserves in inventories and accounts payable; and latent losses for bad debt and assets revaluations. I draw special attention to recent IFRS convergences to US GAAP, especially in harmonizing with FAS 130 Reporting comprehensive income (in revised IAS 1 and FAS 157 Fair value measurement. CAPCBIH variable, resulted in very poor performance, presents considerable lack of recognizing environment specifics. Furthermore, I underline the importance of revised ISAE and re-enforced role of auditors in assessing relevance of management estimates.

Variable identification in group method of data handling methodology

Energy Technology Data Exchange (ETDEWEB)

Pereira, Iraci Martinez, E-mail: martinez@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Bueno, Elaine Inacio [Instituto Federal de Educacao, Ciencia e Tecnologia, Guarulhos, SP (Brazil)

2011-07-01

The Group Method of Data Handling - GMDH is a combinatorial multi-layer algorithm in which a network of layers and nodes is generated using a number of inputs from the data stream being evaluated. The GMDH network topology has been traditionally determined using a layer by layer pruning process based on a preselected criterion of what constitutes the best nodes at each level. The traditional GMDH method is based on an underlying assumption that the data can be modeled by using an approximation of the Volterra Series or Kolmorgorov-Gabor polynomial. A Monitoring and Diagnosis System was developed based on GMDH and Artificial Neural Network - ANN methodologies, and applied to the IPEN research Reactor IEA-R1. The GMDH was used to study the best set of variables to be used to train an ANN, resulting in a best monitoring variable estimative. The system performs the monitoring by comparing these estimative calculated values with measured ones. The IPEN Reactor Data Acquisition System is composed of 58 variables (process and nuclear variables). As the GMDH is a self-organizing methodology, the input variables choice is made automatically, and the real input variables used in the Monitoring and Diagnosis System were not showed in the final result. This work presents a study of variable identification of GMDH methodology by means of an algorithm that works in parallel with the GMDH algorithm and traces the initial variables paths, resulting in an identification of the variables that composes the best Monitoring and Diagnosis Model. (author)

Variable identification in group method of data handling methodology

International Nuclear Information System (INIS)

Pereira, Iraci Martinez; Bueno, Elaine Inacio

2011-01-01

The Group Method of Data Handling - GMDH is a combinatorial multi-layer algorithm in which a network of layers and nodes is generated using a number of inputs from the data stream being evaluated. The GMDH network topology has been traditionally determined using a layer by layer pruning process based on a preselected criterion of what constitutes the best nodes at each level. The traditional GMDH method is based on an underlying assumption that the data can be modeled by using an approximation of the Volterra Series or Kolmorgorov-Gabor polynomial. A Monitoring and Diagnosis System was developed based on GMDH and Artificial Neural Network - ANN methodologies, and applied to the IPEN research Reactor IEA-R1. The GMDH was used to study the best set of variables to be used to train an ANN, resulting in a best monitoring variable estimative. The system performs the monitoring by comparing these estimative calculated values with measured ones. The IPEN Reactor Data Acquisition System is composed of 58 variables (process and nuclear variables). As the GMDH is a self-organizing methodology, the input variables choice is made automatically, and the real input variables used in the Monitoring and Diagnosis System were not showed in the final result. This work presents a study of variable identification of GMDH methodology by means of an algorithm that works in parallel with the GMDH algorithm and traces the initial variables paths, resulting in an identification of the variables that composes the best Monitoring and Diagnosis Model. (author)

Accounting for sex differences in PTSD: A multi-variable mediation model.

Science.gov (United States)

Christiansen, Dorte M; Hansen, Maj

2015-01-01

Approximately twice as many females as males are diagnosed with posttraumatic stress disorder (PTSD). However, little is known about why females report more PTSD symptoms than males. Prior studies have generally focused on few potential mediators at a time and have often used methods that were not ideally suited to test for mediation effects. Prior research has identified a number of individual risk factors that may contribute to sex differences in PTSD severity, although these cannot fully account for the increased symptom levels in females when examined individually. The present study is the first to systematically test the hypothesis that a combination of pre-, peri-, and posttraumatic risk factors more prevalent in females can account for sex differences in PTSD severity. The study was a quasi-prospective questionnaire survey assessing PTSD and related variables in 73.3% of all Danish bank employees exposed to bank robbery during the period from April 2010 to April 2011. Participants filled out questionnaires 1 week (T1, N=450) and 6 months after the robbery (T2, N=368; 61.1% females). Mediation was examined using an analysis designed specifically to test a multiple mediator model. Females reported more PTSD symptoms than males and higher levels of neuroticism, depression, physical anxiety sensitivity, peritraumatic fear, horror, and helplessness (the A2 criterion), tonic immobility, panic, dissociation, negative posttraumatic cognitions about self and the world, and feeling let down. These variables were included in the model as potential mediators. The combination of risk factors significantly mediated the association between sex and PTSD severity, accounting for 83% of the association. The findings suggest that females report more PTSD symptoms because they experience higher levels of associated risk factors. The results are relevant to other trauma populations and to other trauma-related psychiatric disorders more prevalent in females, such as depression

Building a maintenance policy through a multi-criterion decision-making model

Science.gov (United States)

Faghihinia, Elahe; Mollaverdi, Naser

2012-08-01

A major competitive advantage of production and service systems is establishing a proper maintenance policy. Therefore, maintenance managers should make maintenance decisions that best fit their systems. Multi-criterion decision-making methods can take into account a number of aspects associated with the competitiveness factors of a system. This paper presents a multi-criterion decision-aided maintenance model with three criteria that have more influence on decision making: reliability, maintenance cost, and maintenance downtime. The Bayesian approach has been applied to confront maintenance failure data shortage. Therefore, the model seeks to make the best compromise between these three criteria and establish replacement intervals using Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE II), integrating the Bayesian approach with regard to the preference of the decision maker to the problem. Finally, using a numerical application, the model has been illustrated, and for a visual realization and an illustrative sensitivity analysis, PROMETHEE GAIA (the visual interactive module) has been used. Use of PROMETHEE II and PROMETHEE GAIA has been made with Decision Lab software. A sensitivity analysis has been made to verify the robustness of certain parameters of the model.

Using ANFIS for selection of more relevant parameters to predict dew point temperature

International Nuclear Information System (INIS)

Mohammadi, Kasra; Shamshirband, Shahaboddin; Petković, Dalibor; Yee, Por Lip; Mansor, Zulkefli

2016-01-01

Highlights: • ANFIS is used to select the most relevant variables for dew point temperature prediction. • Two cities from the central and south central parts of Iran are selected as case studies. • Influence of 5 parameters on dew point temperature is evaluated. • Appropriate selection of input variables has a notable effect on prediction. • Considering the most relevant combination of 2 parameters would be more suitable. - Abstract: In this research work, for the first time, the adaptive neuro fuzzy inference system (ANFIS) is employed to propose an approach for identifying the most significant parameters for prediction of daily dew point temperature (T_d_e_w). The ANFIS process for variable selection is implemented, which includes a number of ways to recognize the parameters offering favorable predictions. According to the physical factors influencing the dew formation, 8 variables of daily minimum, maximum and average air temperatures (T_m_i_n, T_m_a_x and T_a_v_g), relative humidity (R_h), atmospheric pressure (P), water vapor pressure (V_P), sunshine hour (n) and horizontal global solar radiation (H) are considered to investigate their effects on T_d_e_w. The used data include 7 years daily measured data of two Iranian cities located in the central and south central parts of the country. The results indicate that despite climate difference between the considered case studies, for both stations, V_P is the most influential variable while R_h is the least relevant element. Furthermore, the combination of T_m_i_n and V_P is recognized as the most influential set to predict T_d_e_w. The conducted examinations show that there is a remarkable difference between the errors achieved for most and less relevant input parameters, which highlights the importance of appropriate selection of input parameters. The use of more than two inputs may not be advisable and appropriate; thus, considering the most relevant combination of 2 parameters would be more suitable

Spatial frequency discrimination : visual long-term memory or criterion setting?

OpenAIRE

1998-01-01

A long-term sensory memory is believed to account for spatial frequency discrimination when reference and test stimuli are separated by long intervals. We test an alternative proposal: that discrimination is determined by the range of test stimuli, through their entrainment of criterion-setting processes. Experiments 1 and 2 show that the 50% point of the psychometric function is largely determined by the midpoint of the stimulus range, not by the reference stimulus. Experiment 3 shows that d...

Description of a developmental criterion-referenced assessment for promoting competence in internal medicine residents.

Science.gov (United States)

Varney, Andrew; Todd, Christine; Hingle, Susan; Clark, Michael

2009-09-01

End-of- rotation global evaluations can be subjective, produce inflated grades, lack interrater reliability, and offer information that lacks value. This article outlines the generation of a unique developmental criterion-referenced assessment that applies adult learning theory and the learner, manager, teacher model, and represents an innovative application to the American Board of Internal Medicine (ABIM) 9-point scale. We describe the process used by Southern Illinois University School of Medicine to develop rotation-specific, criterion-based evaluation anchors that evolved into an effective faculty development exercise. The intervention gave faculty a clearer understanding of the 6 Accreditation Council for Graduate Medical Education competencies, each rotation's educational goals, and how rotation design affects meaningful work-based assessment. We also describe easily attainable successes in evaluation design and pitfalls that other institutions may be able to avoid. Shifting the evaluation emphasis on the residents' development of competence has made the expectations of rotation faculty more transparent, has facilitated conversations between program director and residents, and has improved the specificity of the tool for feedback. Our findings showed the new approach reduced grade inflation compared with the ABIM end-of-rotation global evaluation form. We offer the new developmental criterion-referenced assessment as a unique application of the competences to the ABIM 9-point scale as a transferable model for improving the validity and reliability of resident evaluations across graduate medical education programs.

Applying a new criterion to predict glass forming alloys in the Zr–Ni–Cu ternary system

Energy Technology Data Exchange (ETDEWEB)

Déo, L.P., E-mail: leonardopratavieira@gmail.com [Universidade de São Paulo, EESC, SMM - Av. Trabalhador São Carlense, 400 – São Carlos, SP 13566-590 (Brazil); Mendes, M.A.B., E-mail: marcio.andreato@gmail.com [Universidade Federal de São Carlos, DEMa - Rod. Washington Luiz, Km 235 – São Carlos, SP 13565-905 (Brazil); Costa, A.M.S., E-mail: alexmatos1980@gmail.com [Universidade de São Paulo, DEMAR, EEL – Polo Urbo-Industrial Gleba AI-6, s/n – Lorena, SP 12600-970 (Brazil); Campos Neto, N.D., E-mail: nelsonddcn@gmail.com [Universidade de São Paulo, EESC, SMM - Av. Trabalhador São Carlense, 400 – São Carlos, SP 13566-590 (Brazil); Oliveira, M.F. de, E-mail: falcao@sc.usp.br [Universidade de São Paulo, EESC, SMM - Av. Trabalhador São Carlense, 400 – São Carlos, SP 13566-590 (Brazil)

2013-03-15

Highlights: ► Calculation to predict and select the glass forming ability (GFA) of metallic alloys in Zr–Ni–Cu system. ► Good correlation between theoretical and experimental GFA samples. ► Combination of X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques mainly to characterize the samples. ► Oxygen impurity dramatically reduced the GFA. ► The selection criterion used opens the possibility to obtain new amorphous alloys, reducing the experimental procedures of trial and error. -- Abstract: A new criterion has been recently proposed to predict and select the glass forming ability (GFA) of metallic alloys. It was found that the critical cooling rate for glass formation (R{sub c}) correlates well with a proper combination of two factors, the minimum topological instability (λ{sub min}) and the thermodynamic parameter (Δh). The (λ{sub min}) criterion is based on the concept of topological instability of stable crystalline structures and (Δh) depends on the average work function difference (Δϕ) and the average electron density difference Δn{sub ws}{sup 1/3} among the constituent elements of the alloy. In the present work, the selection criterion was applied in the Zr–Ni–Cu system and its predictability was analyzed experimentally. Ribbon-shaped and splat-shaped samples were produced by melt-spinning and splat-cooling techniques respectively. The crystallization content and behavior were analyzed by X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The results showed a good correlation between the theoretical GFA values and the amorphous phase percentages found in different alloy compositions.

An Illustration of Determining Quantitatively the Rock Mass Quality Parameters of the Hoek-Brown Failure Criterion

Science.gov (United States)

Wu, Li; Adoko, Amoussou Coffi; Li, Bo

2018-04-01

In tunneling, determining quantitatively the rock mass strength parameters of the Hoek-Brown (HB) failure criterion is useful since it can improve the reliability of the design of tunnel support systems. In this study, a quantitative method is proposed to determine the rock mass quality parameters of the HB failure criterion, namely the Geological Strength Index (GSI) and the disturbance factor ( D) based on the structure of drilling core and weathering condition of rock mass combined with acoustic wave test to calculate the strength of rock mass. The Rock Mass Structure Index and the Rock Mass Weathering Index are used to quantify the GSI while the longitudinal wave velocity ( V p) is employed to derive the value of D. The DK383+338 tunnel face of Yaojia tunnel of Shanghai-Kunming passenger dedicated line served as illustration of how the methodology is implemented. The values of the GSI and D are obtained using the HB criterion and then using the proposed method. The measured in situ stress is used to evaluate their accuracy. To this end, the major and minor principal stresses are calculated based on the GSI and D given by HB criterion and the proposed method. The results indicated that both methods were close to the field observation which suggests that the proposed method can be used for determining quantitatively the rock quality parameters, as well. However, these results remain valid only for rock mass quality and rock type similar to those of the DK383+338 tunnel face of Yaojia tunnel.

[Relevance of Personality Factors for Successful Vocational Rehabilitation].

Science.gov (United States)

Arling, V; Slavchova, V; Knispel, J; Spijkers, W

2016-02-01

The Main purpose of vocational rehabilitation is occupational reintegration of clients into the job market who have lost their job or whose job is threatened because of a handicap or chronicl illness. With regard to existing evidence for the relevance of personality factors for work performance and job achievement, the present study investigated the influence of participants' personality factors on a successful reintegration after a retraining program in a vocational training center over 2 years. A central research objective was to identify prognostic personality factors for successful vocational integration. In this longitudinal study 15 vocational training centers participated at 3 time points of measurement (T1, T2 and T3). Data gathering was based on rehabilitants' self-reports (standardized questionnaires: SVF, BSW, SPR, CSES) about personality aspects. First data collection started at the beginning (T1) and a second survey was conducted at the end of the training 2 years later (T2). Based on the data at measurement points T1 and T2, 4 prognostic models were computed (binary logistic regression analysis) and evaluated, examining the differenzial influence of several scales and items on direct reintegration after completing the vocational retraining and reintegration status 6 months later (T3). As expected, different variables turned out to be relevant for occupational integration at the end of the training program and 6 months later. Correspondingly other variables appeared to be relevant for occupational reintegration at T1 and at T2. At the end of the vocational training program, approximately 24% of the participants had a job. With respect to direct reintegration, regression analysis revealed that vocational self-efficacy (R(2)=0,175) and self-evaluation were relevant (R(2)=0,383). Approximately 70% of the participants had gotten a job 6 months later. Several stress coping strategies (R(2)=0,170), estimation of the own reintegration prognosis and aspects

Development and Criterion Validity of Differentiated and Elevated Vocational Interests in Adolescence

Science.gov (United States)

Hirschi, Andreas

2009-01-01

Interest differentiation and elevation are supposed to provide important information about a person's state of interest development, yet little is known about their development and criterion validity. The present study explored these constructs among a group of Swiss adolescents. Study 1 applied a cross-sectional design with 210 students in 11th…

Relevant energy scale of color confinement from lattice QCD

International Nuclear Information System (INIS)

Yamamoto, Arata; Suganuma, Hideo

2009-01-01

We propose a new lattice framework to extract the relevant gluonic energy scale of QCD phenomena which is based on a 'cut' on link variables in momentum space. This framework is expected to be broadly applicable to all lattice QCD calculations. Using this framework, we quantitatively determine the relevant energy scale of color confinement, through the analyses of the quark-antiquark potential and meson masses. The relevant energy scale of color confinement is found to be below 1.5 GeV in the Landau gauge. In fact, the string tension is almost unchanged even after cutting off the high-momentum gluon component above 1.5 GeV. When the relevant low-energy region is cut, the quark-antiquark potential is approximately reduced to a Coulomb-like potential, and each meson becomes a quasifree quark pair. As an analytical model calculation, we also investigate the dependence of the Richardson potential on the cut, and find the consistent behavior with the lattice result.

Applicability of the Modified Ritchie-Knott-Rice Failure Criterion to Examine the Feasibility of Miniaturized Charpy Type SE(B Specimens

Directory of Open Access Journals (Sweden)

Toshiyuki Meshii

2016-01-01

Full Text Available This paper examined whether the modified Ritchie-Knott-Rice (RKR failure criterion can be applied to examine the feasibility of miniaturized Charpy type SE(B specimens of thickness-to-width ratio B/W=1. The modified RKR failure criterion considered in this paper is the (4δt,σ22c criterion which predicts the onset of cleavage fracture when the midplane crack-opening stress measured at a distance equal to four times the crack-tip opening displacement, denoted as σ22d, exceeds a critical stress σ22c. Specimens with B values of 25, 10, 3, and 2 mm (denoted as 25t, 10t, 3t, and 2t specimens, resp. manufactured with 0.55% carbon steel were tested at 20°C. The results showed that the modified RKR criterion could appropriately predict the occurrence of cleavage fracture accompanied by negligibly small stable crack extension (denoted as KJc fracture naturally for the 25t and 10t specimens. The modified RKR criterion could also predict that KJc fracture does not occur for the 2t specimen. The σ22c obtained from specimens for the 25t and 10t specimens exhibited only a small difference, indicating that the Jc obtained from the 10t specimens can be used to predict the Jc that will be obtained with the 25t specimens.

Goldberger-Treiman constraint criterion for hyperon coupling constants

International Nuclear Information System (INIS)

General, Ignacio J.; Cotanch, Stephen R.

2004-01-01

The generalized Goldberger-Treiman relation is combined with the Dashen-Weinstein sum rule to provide a constraint equation between the g KΣN and g KΛN coupling constants. A comprehensive examination of the published phenomenological and theoretical hyperon couplings has yielded a much smaller set of values, spanning the intervals 0.80≤g KΣN /√(4π)≤2.72 and -3.90≤g KΛN /√(4π)≤-1.84, consistent with this criterion. The broken SU F (3) and Goldberger-Treiman hyperon couplings satisfy the constraint along with predictions from a Taylor series extrapolation using the same momentum variation as exhibited by g πNN

The Properties of Model Selection when Retaining Theory Variables

DEFF Research Database (Denmark)

Hendry, David F.; Johansen, Søren

Economic theories are often fitted directly to data to avoid possible model selection biases. We show that embedding a theory model that specifies the correct set of m relevant exogenous variables, x{t}, within the larger set of m+k candidate variables, (x{t},w{t}), then selection over the second...... set by their statistical significance can be undertaken without affecting the estimator distribution of the theory parameters. This strategy returns the theory-parameter estimates when the theory is correct, yet protects against the theory being under-specified because some w{t} are relevant....

Variable Dimension Trellis-Coded Quantization of Sinusoidal Parameters

DEFF Research Database (Denmark)

Larsen, Morten Holm; Christensen, Mads G.; Jensen, Søren Holdt

2008-01-01

In this letter, we propose joint quantization of the parameters of a set of sinusoids based on the theory of trellis-coded quantization. A particular advantage of this approach is that it allows for joint quantization of a variable number of sinusoids, which is particularly relevant in variable...

Brief report: The Brief Alcohol Social Density Assessment (BASDA): convergent, criterion-related, and incremental validity.

Science.gov (United States)

MacKillop, James; Acker, John D; Bollinger, Jared; Clifton, Allan; Miller, Joshua D; Campbell, W Keith; Goodie, Adam S

2013-09-01

Alcohol misuse is substantially influenced by social factors, but systematic assessments of social network drinking are typically lengthy. The goal of the present study was to provide further validation of a brief measure of social network alcohol use, the Brief Alcohol Social Density Assessment (BASDA), in a sample of emerging adults. Specifically, the study sought to examine the BASDA's convergent, criterion, and incremental validity in relation to well-established measures of drinking motives and problematic drinking. Participants were 354 undergraduates who were assessed using the BASDA, the Alcohol Use Disorders Identification Test (AUDIT), and the Drinking Motives Questionnaire. Significant associations were observed between the BASDA index of alcohol-related social density and alcohol misuse, social motives, and conformity motives, supporting convergent validity. Criterion-related validity was supported by evidence that significantly greater alcohol involvement was present in the social networks of individuals scoring at or above an AUDIT score of 8, a validated criterion for hazardous drinking. Finally, the BASDA index was significantly associated with alcohol misuse above and beyond drinking motives in relation to AUDIT scores, supporting incremental validity. Taken together, these findings provide further support for the BASDA as an efficient measure of drinking in an individual's social network. Methodological considerations as well as recommendations for future investigations in this area are discussed.

Critical machine cluster identification using the equal area criterion

DEFF Research Database (Denmark)

Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Østergaard, Jacob

2015-01-01

The paper introduces a new method to early identify the critical machine cluster (CMC) after a transient disturbance. For transient stability assessment with methods based on the equal area criterion it is necessary to split the generators into a group of critical and non-critical machines....... The generators in the CMC are those likely to lose synchronism. The early and reliable identification of the CMC is crucial and one of the major challenges. The proposed new approach is based on the assessment of the rotor dynamics between two machines and the evaluation of their coupling strength. A novel...

Proposing a model for safety risk assessment in the construction industry using gray multi-criterion decision-making

Directory of Open Access Journals (Sweden)

S. M. Abootorabi

2014-09-01

Full Text Available Introduction: Statistical Report of the Social Security Organization indicate that among the various industries, the construction industry has the highest number of work-related accidents so that in addition to frequency, it has high intensity, as well. On the other hand, a large number of human resources are working in this whish shows they necessity for paying special attention to these workers. Therefore, risk assessment of the safety in the construction industry is an effective step in this regard. In this study, a method for ranking safety risks in conditions of low number of samples and uncertainty is presented, using gray multi-criterion decision-making. .Material and Method: In this study, we first identified the factors affecting the occurrence of hazards in the construction industry. Then, appropriate for ranking the risks were determined and the problem was defined as a multi-criterion decision-making. In order to weight the criteria and to evaluate alternatives based on each criterion, gray numbers were used. In the last stage, the problem was solved using the gray possibility degree. .Results: The results show that the method of gray multi-criterion decision-making is an effective method for ranking risks in situations of low samples compared with other methods of MCDM. .Conclusion: The proposed method is preferred to fuzzy methods and statistics in uncertain and low sample size, due to simple calculations and no need to define the membership function.

A Path-Independent Forming Limit Criterion for Stamping Simulations

International Nuclear Information System (INIS)

Zhu Xinhai; Chappuis, Laurent; Xia, Z. Cedric

2005-01-01

Forming Limit Diagram (FLD) has been proved to be a powerful tool for assessing necking failures in sheet metal forming analysis for majority of stamping operations over the last three decades. However, experimental evidence and theoretical analysis suggest that its applications are limited to linear or almost linear strain paths during its deformation history. Abrupt changes or even gradual deviations from linear strain-paths will shift forming limit curves from their original values, a situation that occurs in vast majority of sequential stamping operations such as where the drawing process is followed by flanging and re-strike processes. Various forming limit models have been put forward recently to provide remedies for the problem, noticeably stress-based and strain gradient-based forming limit criteria. This study presents an alternative path-independent forming limit criterion. Instead of traditional Forming Limit Diagrams (FLD) which are constructed in terms of major - minor principal strains throughout deformation history, the new criterion defines a critical effective strain ε-bar* as the limit strain for necking, and it is shown that ε-bar* can be expressed as a function of current strain rate state and material work hardening properties, without the need of explicitly considering strain-path effects. It is given by ε-bar* = f(β, k, n) where β = (dε 2 /dε 1 ) at current deformation state, and k and n are material strain hardening parameters if a power law is assumed. The analysis is built upon previous work by Storen and Rice [1975] and Zhu et al [2002] with the incorporation of anisotropic yield models such as Hill'48 for quadratic orthotropic yield and Hill'79 for non-quadratic orthotropic yield. Effects of anisotropic parameters such as R-values and exponent n-values on necking are investigated in detail for a variety of strain paths. Results predicted according to current analysis are compared against experimental data gathered from literature

An existential criterion of normal and abnormal personality in the works of Carl Jung and Carl Rogers

Directory of Open Access Journals (Sweden)

Kapustin, Sergey A.

2016-06-01

Full Text Available This article is the third in a series of four articles scheduled for publication in this journal. In the first article (Kapustin, 2015a I proposed a description of a new so-called existential criterion of normal and abnormal personality that is implicitly present in the works of Erich Fromm. According to this criterion, normal and abnormal personalities are determined, first, by special features of the content of their position regarding existential dichotomies that are natural to human beings and, second, by particular aspects of the formation of this position. Such dichotomies, entitatively existent in all human life, are inherent, two-alternative contradictions. The position of a normal personality in its content orients a person toward a contradictious predetermination of life in the form of existential dichotomies and necessitates a search for compromise in resolving these dichotomies. This position is created on a rational basis with the person’s active participation. The position of an abnormal personality in its content subjectively denies a contradictious predetermination of life in the form of existential dichotomies and orients a person toward a consistent, noncompetitive, and, as a consequence, onesided way of life that doesn’t include self-determination. This position is imposed by other people on an irrational basis. Abnormality of personality interpreted like that is one of the most important factors influencing the development of various kinds of psychological problems and mental disorders — primarily, neurosis. In the second article (Kapustin, 2015b I showed that this criterion is also implicitly present in the personality theories of Sigmund Freud and Alfred Adler, although in more specific cases. In the current work I prove that this criterion is also present in the personality theories of Carl Jung and Carl Rogers, where it is implicitly stated in a more specific way. In the final article I will show that this criterion

A unique criterion for the classification of the activity of radioactive effluents according to the activity

International Nuclear Information System (INIS)

Tasovac, T.; Bojovic, P.; Svabic, A.

1964-10-01

The present classification of radioactive effluents into categories, i.e. low, medium, high and very high activity, has not been given a definite criterion. Therefore, some categories include specific activities from 2-6 and more potentials. Therefore, it occurs that the category of medium active effluents in one nuclear center is indicated as low active in the second or as highly active in the third. Therefore, a proposal is given in this paper for a unique criterion for the classification of radioactive effluents according to their activities. This proposal is based on the decontamination factors obtained by various methods and the maximum permissible concentrations of radioactive isotopes in water (author)

Generalized Empirical Likelihood-Based Focused Information Criterion and Model Averaging

Directory of Open Access Journals (Sweden)

Naoya Sueishi

2013-07-01

Full Text Available This paper develops model selection and averaging methods for moment restriction models. We first propose a focused information criterion based on the generalized empirical likelihood estimator. We address the issue of selecting an optimal model, rather than a correct model, for estimating a specific parameter of interest. Then, this study investigates a generalized empirical likelihood-based model averaging estimator that minimizes the asymptotic mean squared error. A simulation study suggests that our averaging estimator can be a useful alternative to existing post-selection estimators.

A criterion for the onset of slugging in horizontal stratified air-water countercurrent flow

International Nuclear Information System (INIS)

Chun, Moon-Hyun; Lee, Byung-Ryung; Kim, Yang-Seok

1995-01-01

This paper presents an experimental and theoretical investigation of wave height and transition criterion from wavy to slug flow in horizontal air-water countercurrent stratified flow conditions. A theoretical formula for the wave height in a stratified wavy flow regime has been developed using the concept of total energy balance over a wave crest to consider the shear stress acting on the interface of two fluids. From the limiting condition of the formula for the wave height, a necessary criterion for transition from a stratified wavy flow to a slug flow has been derived. A series of experiments have been conducted changing the non-dimensional water depth and the flow rates of air in a horizontal pipe and a duct. Comparisons between the measured data and the predictions of the present theory show that the agreement is within ±8%

A criterion for the onset of slugging in horizontal stratified air-water countercurrent flow

Energy Technology Data Exchange (ETDEWEB)

Chun, Moon-Hyun; Lee, Byung-Ryung; Kim, Yang-Seok [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)] [and others

1995-09-01

This paper presents an experimental and theoretical investigation of wave height and transition criterion from wavy to slug flow in horizontal air-water countercurrent stratified flow conditions. A theoretical formula for the wave height in a stratified wavy flow regime has been developed using the concept of total energy balance over a wave crest to consider the shear stress acting on the interface of two fluids. From the limiting condition of the formula for the wave height, a necessary criterion for transition from a stratified wavy flow to a slug flow has been derived. A series of experiments have been conducted changing the non-dimensional water depth and the flow rates of air in a horizontal pipe and a duct. Comparisons between the measured data and the predictions of the present theory show that the agreement is within {plus_minus}8%.

The free growth criterion for grain initiation in TiB 2 inoculated γ-titanium aluminide based alloys

Science.gov (United States)

Gosslar, D.; Günther, R.

2014-02-01

γ-titanium aluminide (γ-TiAl) based alloys enable for the design of light-weight and high-temperature resistant engine components. This work centers on a numerical study of the condition for grain initiation during solidification of TiB2 inoculated γ-TiAl based alloys. Grain initiation is treated according to the so-called free growth criterion. This means that the free growth barrier for grain initiation is determined by the maximum interfacial mean curvature between a nucleus and the melt. The strategy presented in this paper relies on iteratively increasing the volume of a nucleus, which partially wets a hexagonal TiB2 crystal, minimizing the interfacial energy and calculating the corresponding interfacial curvature. The hereby obtained maximum curvature yields a scaling relation between the size of TiB2 crystals and the free growth barrier. Comparison to a prototypical TiB2 crystal in an as cast γ-TiAl based alloy allowed then to predict the free growth barrier prevailing under experimental conditions. The validity of the free growth criterion is discussed by an interfacial energy criterion.

Extended equal areas criterion: foundations and applications

Energy Technology Data Exchange (ETDEWEB)

Yusheng, Xue [Nanjim Automation Research Institute, Nanjim (China)

1994-12-31

The extended equal area criterion (EEAC) provides analytical expressions for ultra fast transient stability assessment, flexible sensitivity analysis, and means to preventive and emergency controls. Its outstanding performances have been demonstrated by thousands upon thousands simulations on more than 50 real power systems and by on-line operation records in an EMS environment of Northeast China Power System since September 1992. However, the researchers have mainly based on heuristics and simulations. This paper lays a theoretical foundation of EEAC and brings to light the mechanism of transient stability. It proves true that the dynamic EEAC furnishes a necessary and sufficient condition for stability of multi machine systems with any detailed models, in the sense of the integration accuracy. This establishes a new platform for further advancing EEAC and better understanding of problems. An overview of EEAC applications in China is also given in this paper. (author) 30 refs.

Predicting local dengue transmission in Guangzhou, China, through the influence of imported cases, mosquito density and climate variability.

Directory of Open Access Journals (Sweden)

Shaowei Sang

Full Text Available Each year there are approximately 390 million dengue infections worldwide. Weather variables have a significant impact on the transmission of Dengue Fever (DF, a mosquito borne viral disease. DF in mainland China is characterized as an imported disease. Hence it is necessary to explore the roles of imported cases, mosquito density and climate variability in dengue transmission in China. The study was to identify the relationship between dengue occurrence and possible risk factors and to develop a predicting model for dengue's control and prevention purpose.Three traditional suburbs and one district with an international airport in Guangzhou city were selected as the study areas. Autocorrelation and cross-correlation analysis were used to perform univariate analysis to identify possible risk factors, with relevant lagged effects, associated with local dengue cases. Principal component analysis (PCA was applied to extract principal components and PCA score was used to represent the original variables to reduce multi-collinearity. Combining the univariate analysis and prior knowledge, time-series Poisson regression analysis was conducted to quantify the relationship between weather variables, Breteau Index, imported DF cases and the local dengue transmission in Guangzhou, China. The goodness-of-fit of the constructed model was determined by pseudo-R2, Akaike information criterion (AIC and residual test. There were a total of 707 notified local DF cases from March 2006 to December 2012, with a seasonal distribution from August to November. There were a total of 65 notified imported DF cases from 20 countries, with forty-six cases (70.8% imported from Southeast Asia. The model showed that local DF cases were positively associated with mosquito density, imported cases, temperature, precipitation, vapour pressure and minimum relative humidity, whilst being negatively associated with air pressure, with different time lags.Imported DF cases and mosquito

Assessment of structural integrity of Monju steel liner against sodium leakage and combustion. Strain criterion of the liner material

Energy Technology Data Exchange (ETDEWEB)

Asayama, T.; Koi, M. [Japan Nuclear Cycle Development Institute, Ibaraki (Japan)

2001-07-01

In a postulated condition of sodium leakage and combustion in the secondary heat transfer system of the prototype Japanese fast breeder reactor Monju, thermal stresses raise in steel liners installed to prevent sodium from contacting to concrete. Excessive strain due to the thermal stresses leads to failure of the liner. This paper proposes a strain criterion below that the mechanical integrity of liner is assured. In-plane thermal expansion causes membrane strain and out-of-plane expansion causes bending strain. Therefore, failure modes to be taken into account are tensile fracture and bending fracture. The strain criterion can be determined based on tensile and bending tests. Tensile tests and three-point bending tests were performed at the temperature range from room temperature to 1000 C. Fracture elongation was measured in both tests. Uniform elongation was also measured in tensile tests. Various factors that can affect the above experimental results, multi-axiality, environmental effects, and creep were examined. Based on the above results, the strain criterion was determined. The criterion is 10% for membrane strain and 30% for membrane plus bending strain in the temperature range of 350 C to 1000 C. For the temperatures less than 350 C, the half of those values is used. (author)

Multiaxial fatigue criterion for 2-1/4 Cr-1 Mo steel for use in high-temperature structural design

International Nuclear Information System (INIS)

Blass, J.J.

1990-01-01

An improved multiaxial fatigue failure criterion is described that is based on a definition of equivalent inelastic strain range incorporating the shear and normal components of inelastic strain range on the planes of maximum inelastic shear strain range. Optimum values of certain parameters contained in the formulation were obtained by the method of least squares from the results of combined axial-torsional strain cycling test of 2--1/4 Cr-1 Mo steel conducted at 538 degrees C (1000 degrees F). The ability of this criterion to correlate the test results was compared with that of the Mises equivalent inelastic strain range criterion and was found to be superior. A procedure is described for calculating the required shear and normal components of strain range under general multiaxial strain cycling conditions. An improved definition of equivalent total strain range based on these considerations is directly applicable to the method of estimating fatigue damage in ASME Code Case N-47. 17 refs., 5 figs., 1 tab

The incorporation of displacement-controlled loadings within the net-section stress failure criterion

International Nuclear Information System (INIS)

Smith, E.

1985-01-01

A net-section stress failure criterion can be used to evaluate the critical flaw size for a material having a high fracture resistance. A simple analysis shows that the stress arising from displacement-controlled loadings should be taken into account fully if the applied tearing modulus exceeds a critical value. (author)

Adjustment Criterion and Algorithm in Adjustment Model with Uncertain

Directory of Open Access Journals (Sweden)

SONG Yingchun

2015-02-01

Full Text Available Uncertainty often exists in the process of obtaining measurement data, which affects the reliability of parameter estimation. This paper establishes a new adjustment model in which uncertainty is incorporated into the function model as a parameter. A new adjustment criterion and its iterative algorithm are given based on uncertainty propagation law in the residual error, in which the maximum possible uncertainty is minimized. This paper also analyzes, with examples, the different adjustment criteria and features of optimal solutions about the least-squares adjustment, the uncertainty adjustment and total least-squares adjustment. Existing error theory is extended with new observational data processing method about uncertainty.

Strength cues and blocking at test promote reliable within-list criterion shifts in recognition memory.

Science.gov (United States)

Hicks, Jason L; Starns, Jeffrey J

2014-07-01

In seven experiments, we explored the potential for strength-based, within-list criterion shifts in recognition memory. People studied a mix of target words, some presented four times (strong) and others studied once (weak). In Experiments 1, 2, 4A, and 4B, the test was organized into alternating blocks of 10, 20, or 40 trials. Each block contained lures intermixed with strong targets only or weak targets only. In strength-cued conditions, test probes appeared in a unique font color for strong and weak blocks. In the uncued conditions of Experiments 1 and 2, similar strength blocks were tested, but strength was not cued with font color. False alarms to lures were lower in blocks containing strong target words, as compared with lures in blocks containing weak targets, but only when strength was cued with font color. Providing test feedback in Experiment 2 did not alter these results. In Experiments 3A-3C, test items were presented in a random order (i.e., not blocked by strength). Of these three experiments, only one demonstrated a significant shift even though strength cues were provided. Overall, the criterion shift was larger and more reliable as block size increased, and the shift occurred only when strength was cued with font color. These results clarify the factors that affect participants' willingness to change their response criterion within a test list.

The AP diameter of the pelvis: a new criterion for continence in the exstrophy complex?

International Nuclear Information System (INIS)

Ait-Ameur, A.; Kalifa, G.; Adamsbaum, C.; Wakim, A.; Dubousset, J.

2001-01-01

Reconstructive surgery of bladder exstrophy remains a challenge. By using CT of the pelvis, we suggest a new pre- and post-operative investigative procedure to define the AP diameter (APD) as a predictive criterion for continence in this anomaly. Patients and methods: Three axial CT slices were selected in nine children with exstrophy who had undergone neonatal reconstructive surgery. The three levels selected were the first sacral plate, the mid acetabular plane and the superior pubic spine. We used combined slices to measure: circle APD = distance between the first sacral vertebra and the pubic symphysis. circle Pubic diastasis (PD) circle Three angles defined on the transverse plane of the first sacral vertebra - iliac wing angle, sacropubic angle and acetabular version. In exstrophy, the angles demonstrate opening of the iliac wings and the pubic ramus, and acetabular retroversion compared to controls. Comparisons between controls, continent and incontinent patients reveal that in continent patients, APD increases with growth and seems to be a predictive criterion for continence, independent of diastasis of the pubic symphysis. We believe that CT of the pelvis with measurements of the APD should be performed in all neonates with bladder exstrophy before reconstructive surgery and for better understanding of the malformation. The APD seems to be predictive and may be a major criterion for continence, independent of PD. (orig.)

Using the Predictability Criterion for Selecting Extended Verbs for Shona Dictionaries

Directory of Open Access Journals (Sweden)

Emmanuel Chabata

2012-09-01

Full Text Available

The paper examines the "predictability criterion", a classificatory tool which is used in selecting affixed word forms for dictionary entries. It focuses on the criterion as it has been used by the African Languages Lexical (ALLEX Project for selecting extended verbs to enter as headwords in the Project's first monolingual Shona dictionary Duramazwi ReChiShona. The article also examines the status of Shona verbal extensions in terms of their semantic input to the verb stems they are attached to. The paper was originally motivated by two observations: (a that predictability seems to be a matter of degree; and (b that the predictability criterion tended to be used inconsistently in the selection of extended verbs and senses for Duramazwi ReChiShona. An analysis of 412 productively extended verbs that were entered as headwords in Duramazwi ReChiShona shows that verbal extensions can bring both predictable and unpredictable senses to the verb stems they are attached to. The paper demonstrates that for an effective use of the predictability criterion for selecting extended verbs for Shona dictionaries, there is need for the lexicographer to have an in-depth understanding of the kinds of semantic movements that are caused when verb stems are extended. It shows the need to view verbal extensions in Shona as derivational morphemes, not inflectional morphemes as some earlier scholars have concluded.

Die gebruik van die voorspelbaarheidskriterium om uitgebreide werkwoorde te selekteer vir Shonawoordeboeke

Hierdie artikel ondersoek die "voorspelbaarheidskriterium", 'n klassifikasiehulpmiddel wat gebruik word om geaffigeerde woordvorme te selekteer as woordeboekinskrywings. Dit fokus op die kriterium soos dit gebruik is deur die African Language Lexical (ALLEX Project vir die selektering van uitgebreide werkwoorde as lemmas in die Projek se eerste eentalige Shonawoordeboek Duramazwi ReChiShona. In

Forecastability as a Design Criterion in Wind Resource Assessment: Preprint

Energy Technology Data Exchange (ETDEWEB)

Zhang, J.; Hodge, B. M.

2014-04-01

This paper proposes a methodology to include the wind power forecasting ability, or 'forecastability,' of a site as a design criterion in wind resource assessment and wind power plant design stages. The Unrestricted Wind Farm Layout Optimization (UWFLO) methodology is adopted to maximize the capacity factor of a wind power plant. The 1-hour-ahead persistence wind power forecasting method is used to characterize the forecastability of a potential wind power plant, thereby partially quantifying the integration cost. A trade-off between the maximum capacity factor and the forecastability is investigated.

76 FR 15961 - Funding Priorities and Selection Criterion; Disability and Rehabilitation Research Projects and...

Science.gov (United States)

2011-03-22

... priorities and a selection criterion for the Disability and Rehabilitation Research Projects and Centers... outcomes for underserved populations; (4) identify research gaps; (5) identify mechanisms of integrating research and practice; and (6) disseminate findings. This notice proposes two priorities and a selection...

A measurable Lawson criterion and hydro-equivalent curves for inertial confinement fusion

International Nuclear Information System (INIS)

Zhou, C. D.; Betti, R.

2008-01-01

It is shown that the ignition condition (Lawson criterion) for inertial confinement fusion (ICF) can be cast in a form dependent on the only two parameters of the compressed fuel assembly that can be measured with existing techniques: the hot spot ion temperature (T i h ) and the total areal density (ρR tot ), which includes the cold shell contribution. A marginal ignition curve is derived in the ρR tot , T i h plane and current implosion experiments are compared with the ignition curve. On this plane, hydrodynamic equivalent curves show how a given implosion would perform with respect to the ignition condition when scaled up in the laser-driver energy. For 3 i h > n i h > n 2.6 · tot > n >50 keV 2.6 · g/cm 2 , where tot > n and i h > n are the burn-averaged total areal density and hot spot ion temperature, respectively. Both quantities are calculated without accounting for the alpha-particle energy deposition. Such a criterion can be used to determine how surrogate D 2 and subignited DT target implosions perform with respect to the one-dimensional ignition threshold.

[On the problems of the evolutionary optimization of life history. II. To justification of optimization criterion for nonlinear Leslie model].

Science.gov (United States)

Pasekov, V P

2013-03-01

The paper considers the problems in the adaptive evolution of life-history traits for individuals in the nonlinear Leslie model of age-structured population. The possibility to predict adaptation results as the values of organism's traits (properties) that provide for the maximum of a certain function of traits (optimization criterion) is studied. An ideal criterion of this type is Darwinian fitness as a characteristic of success of an individual's life history. Criticism of the optimization approach is associated with the fact that it does not take into account the changes in the environmental conditions (in a broad sense) caused by evolution, thereby leading to losses in the adequacy of the criterion. In addition, the justification for this criterion under stationary conditions is not usually rigorous. It has been suggested to overcome these objections in terms of the adaptive dynamics theory using the concept of invasive fitness. The reasons are given that favor the application of the average number of offspring for an individual, R(L), as an optimization criterion in the nonlinear Leslie model. According to the theory of quantitative genetics, the selection for fertility (that is, for a set of correlated quantitative traits determined by both multiple loci and the environment) leads to an increase in R(L). In terms of adaptive dynamics, the maximum R(L) corresponds to the evolutionary stability and, in certain cases, convergent stability of the values for traits. The search for evolutionarily stable values on the background of limited resources for reproduction is a problem of linear programming.

Variation and design criterion of heat load ratio of generator for air cooled lithium bromide–water double effect absorption chiller

International Nuclear Information System (INIS)

Li, Zeyu; Liu, Liming; Liu, Jinping

2016-01-01

Highlights: • Design criterion of heat load ratio of generator is vital to system performance. • Heat load ratio of generator changes with working condition. • Change of heat load ratio of generator for four systems was obtained and compared. • Design criterion of heat load ratio of generator was presented. - Abstract: The heat load ratio of generator (HLRG) is a special system parameter because it is not fixed at the design value but changes with the working condition. For the air cooled chiller, the deviation from the design working condition occurs easily due to the variation of the surrounding temperature. The system is likely to suffer from crystallization when the working condition is different from the designed one if the HLRG is designed improperly. Consequently, the design criterion of HLRG based on a broad range of working condition is essential and urgent to the development of air cooled lithium bromide–water double effect absorption chiller. This paper mainly deals with the variation of HLRG with the working condition as well as corresponding design criterion. Four types of double effect chillers named series, pre-parallel, rear parallel and reverse parallel flow system were considered. The parametric model was developed by the introduction of a new thermodynamic relationship of generator. The change of HLRG for different types of chillers with the working condition was analyzed and compared. The corresponding design criterion of HLRG was presented. This paper is helpful for further improvement of the performance and reliability of air cooled lithium bromide–water double effect absorption chiller.

Variable interest consolidation (FASB,FIN 46/R) : valve relevance and empirical consequences on financial reporting

OpenAIRE

Valentinis, Edi

2008-01-01

2007/2008 FASB introduction of FIN 46/R variable interest consolidation model proved revolutionary as it ties up the accounting to the economic/financial frameworks and the judicial one. Legal structures and agreements among stakeholders of entities, creating net assets’ variability, have from now on to be compared with expected losses and expected returns distribution, prior to identify which stakeholder will need to consolidate pursuant this Interpretation. As a result, return variabilit...

STEPWISE SELECTION OF VARIABLES IN DEA USING CONTRIBUTION LOADS

Directory of Open Access Journals (Sweden)

Fernando Fernandez-Palacin

Full Text Available ABSTRACT In this paper, we propose a new methodology for variable selection in Data Envelopment Analysis (DEA. The methodology is based on an internal measure which evaluates the contribution of each variable in the calculation of the efficiency scores of DMUs. In order to apply the proposed method, an algorithm, known as “ADEA”, was developed and implemented in R. Step by step, the algorithm maximizes the load of the variable (input or output which contribute least to the calculation of the efficiency scores, redistributing the weights of the variables without altering the efficiency scores of the DMUs. Once the weights have been redistributed, if the lower contribution does not reach a previously given critical value, a variable with minimum contribution will be removed from the model and, as a result, the DEA will be solved again. The algorithm will stop when all variables reach a given contribution load to the DEA or until no more variables can be removed. In this way and contrary to what is usual, the algorithm provides a clear stop rule. In both cases, the efficiencies obtained from the DEA will be considered suitable and rightly interpreted in terms of the remaining variables, indicating the load themselves; moreover, the algorithm will provide a sequence of alternative nested models - potential solutions - that could be evaluated according to external criterion. To illustrate the procedure, we have applied the methodology proposed to obtain a research ranking of Spanish public universities. In this case, at each step of the algorithm, the critical value is obtained based on a simulation study.

AGGLOMERATIVE CLUSTERING OF SOUND RECORD SPEECH SEGMENTS BASED ON BAYESIAN INFORMATION CRITERION

Directory of Open Access Journals (Sweden)

O. Yu. Kydashev

2013-01-01

Full Text Available This paper presents the detailed description of agglomerative clustering system implementation for speech segments based on Bayesian information criterion. Numerical experiment results with different acoustic features, as well as the full and diagonal covariance matrices application are given. The error rate DER equal to 6.4% for audio records of radio «Svoboda» was achieved by means of designed system.

Features of Designing the Criterion-Based Rehabilitation Program for Patients after Arthroscopic Reconstruction of the Anterior Cruciate Ligament

Directory of Open Access Journals (Sweden)

I.V. Roy

2016-04-01

Full Text Available The article presents an innovative criterion-based rehabilitation program for patients, who underwent arthroscopic reconstruction of the anterior cruciate ligament. The features of the program are described, methodological foundations to perform permissible exercises are presented for each periods of the program, which correspond to a specific motor mode. The degree of preparedness of the patient is determined by the criterion of performance of the test exercises that will permit him to the loads of a new, higher level of trainings. The effectiveness of the developed program is confirmed clinically.

Background as a residual radioactivity criterion for decommissioning: Appendix A to the Generic Environmental Impact Statement in support of rulemaking on radiological criteria for decommissioning of NRC-licensed nuclear facilities. Draft report

International Nuclear Information System (INIS)

Huffert, A.M.; Meck, R.A.; Miller, K.M.

1994-08-01

This report was originally published as an appendix to the draft U.S. Nuclear Regulatory Commission (NRC) document entitled, open-quotes Generic Environmental Impact Statement in Support of Rulemaking on Radiological Criteria for Decommissioning of NRC-Licensed Nuclear Facilities.close quotes Because of the great interest in this report by members of the public, citizen and environmental organizations, academicians, licensees, and regulators, the NRC staff is publishing this report separately, so that it can be readily available to a diverse audience. This report was created to assist both the NRC staff and interested members of the public in evaluating background radiation (background) as a decommissioning criterion, by serving as a primer on background and providing information on the existing applications of background in regulatory criteria and standards. This report also discusses some of the methods available to measure and distinguish between the very low radiation levels associated with background and man-made sources of radiation. Two approaches are considered for applying background as a decommissioning criterion; these are the use of background dose rates and background radionuclide concentrations. This report concludes that the temporal and spatial variability of background produces a wide range of doses to United States residents, which prevents the application of background dose rates as a decommissioning criterion. Instead, this report recommends that local background radionuclide concentrations serve as a benchmark for decommissioning criteria, while taking into account the concept of reducing residual radioactivity to a level as low as is reasonably achievable

Some comment on the use of J criterion in elastic plastic fracture mechanics

International Nuclear Information System (INIS)

Roche, R.L.

1978-01-01

In Post Yield Fracture Mechanics, several criteria have been proposed for the onset of crack propagation, one of the most popular being the J 1 integral criterion. This is only well established for elastic materials, where it can be shown that J 1 is not path dependent, and that J 1 is equal to the variation of potential energy with crack length. Extension is easy for material exhibiting deformation type plasticity, but there is no proof of path independence for flow-type plastic material. Experimental results are often given as a proof of J 1 criterion validity, but a critical analysis shows that important assumptions are made in the use of the test results. The main assumption is that the received work, known as strain energy, is not dependent on the loading history and is only dependent on the mechanical state. The study of the J 1 path dependence is the main point of the J 1 criteria validation. A general method to assess path dependence can be founded on the 'defect vector' (or driving force) concept. The space-density of defect is given by j = grad W - σ grad (W = strain-energy, σ stress tensor, epsilon strain tensor). It is shown that the virtual translation delta a of the defect vectors inside a volume, lead to a virtual work variation given by J 1 delta a and that J 1 is the resultant of all the defect vectors included in the volume surrounded by the integration surface. Using these results the path independence conditions are examined. Some numerical results are given for incremental processes such as plasticity or creep, and where the loading path is radial (proportional) and monotonic, no appreciable path variations found. Finally the results of direct applications of J 1 criterion to real structures are examined. (author)

AUTOMATIC RECOGNITION OF FALLS IN GAIT-SLIP: A HARNESS LOAD CELL BASED CRITERION

Science.gov (United States)

Yang, Feng; Pai, Yi-Chung

2012-01-01

Over-head-harness systems, equipped with load cell sensors, are essential to the participants’ safety and to the outcome assessment in perturbation training. The purpose of this study was to first develop an automatic outcome recognition criterion among young adults for gait-slip training and then verify such criterion among older adults. Each of 39 young and 71 older subjects, all protected by safety harness, experienced 8 unannounced, repeated slips, while walking on a 7-m walkway. Each trial was monitored with a motion capture system, bilateral ground reaction force (GRF), harness force and video recording. The fall trials were first unambiguously indentified with careful visual inspection of all video records. The recoveries without balance loss (in which subjects’ trailing foot landed anteriorly to the slipping foot) were also first fully recognized from motion and GRF analyses. These analyses then set the gold standard for the outcome recognition with load cell measurements. Logistic regression analyses based on young subjects’ data revealed that peak load cell force was the best predictor of falls (with 100% accuracy) at the threshold of 30% body weight. On the other hand, the peak moving average force of load cell across 1-s period, was the best predictor (with 100% accuracy) separating recoveries with backward balance loss (in which the recovery step landed posterior to slipping foot) from harness assistance at the threshold of 4.5% body weight. These threshold values were fully verified using the data from older adults (100% accuracy in recognizing falls). Because of the increasing popularity in the perturbation training coupling with the protective over-head-harness system, this new criterion could have far reaching implications in automatic outcome recognition during the movement therapy. PMID:21696744

46 CFR 167.01-8 - Inspection of school ships using gross tonnage criterion.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection of school ships using gross tonnage criterion... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS General Provisions § 167.01-8 Inspection of school ships using gross... school ships by relative sizes in gross tonnages. When it is determined in accordance with § 70.05-20 of...

Higher order criterion for the nonexistence of formal first integral for nonlinear systems

Directory of Open Access Journals (Sweden)

Zhiguo Xu

2017-11-01

Full Text Available The main purpose of this article is to find a criterion for the nonexistence of formal first integrals for nonlinear systems under general resonance. An algorithm illustrates an application to a class of generalized Lokta-Volterra systems. Our result generalize the classical Poincare's nonintegrability theorem and the existing results in the literature.

easyCBM® Reading Criterion Related Validity Evidence: Grades K-1. Technical Report #1309

Science.gov (United States)

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade K-1 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Dynamic Indicators of Basic Early Literacy…

A latent class distance association model for cross-classified data with a categorical response variable.

Science.gov (United States)

Vera, José Fernando; de Rooij, Mark; Heiser, Willem J

2014-11-01

In this paper we propose a latent class distance association model for clustering in the predictor space of large contingency tables with a categorical response variable. The rows of such a table are characterized as profiles of a set of explanatory variables, while the columns represent a single outcome variable. In many cases such tables are sparse, with many zero entries, which makes traditional models problematic. By clustering the row profiles into a few specific classes and representing these together with the categories of the response variable in a low-dimensional Euclidean space using a distance association model, a parsimonious prediction model can be obtained. A generalized EM algorithm is proposed to estimate the model parameters and the adjusted Bayesian information criterion statistic is employed to test the number of mixture components and the dimensionality of the representation. An empirical example highlighting the advantages of the new approach and comparing it with traditional approaches is presented. © 2014 The British Psychological Society.

Electricity Consumption Forecasting Scheme via Improved LSSVM with Maximum Correntropy Criterion

Directory of Open Access Journals (Sweden)

Jiandong Duan

2018-02-01

Full Text Available In recent years, with the deepening of China’s electricity sales side reform and electricity market opening up gradually, the forecasting of electricity consumption (FoEC becomes an extremely important technique for the electricity market. At present, how to forecast the electricity accurately and make an evaluation of results scientifically are still key research topics. In this paper, we propose a novel prediction scheme based on the least-square support vector machine (LSSVM model with a maximum correntropy criterion (MCC to forecast the electricity consumption (EC. Firstly, the electricity characteristics of various industries are analyzed to determine the factors that mainly affect the changes in electricity, such as the gross domestic product (GDP, temperature, and so on. Secondly, according to the statistics of the status quo of the small sample data, the LSSVM model is employed as the prediction model. In order to optimize the parameters of the LSSVM model, we further use the local similarity function MCC as the evaluation criterion. Thirdly, we employ the K-fold cross-validation and grid searching methods to improve the learning ability. In the experiments, we have used the EC data of Shaanxi Province in China to evaluate the proposed prediction scheme, and the results show that the proposed prediction scheme outperforms the method based on the traditional LSSVM model.

Experimental Analysis and Discussion on the Damage Variable of Frozen Loess

Directory of Open Access Journals (Sweden)

Cong Cai

2017-01-01

Full Text Available The damage variable is very important to study damage evolution of material. Taking frozen loess as an example, a series of triaxial compression and triaxial loading-unloading tests are performed under five strain rates of 5.0 × 10−6–1.3 × 10−2/s at a temperature of −6°C. A damage criterion of frozen loess is defined and a damage factor Dc is introduced to satisfy the requirements of the engineering application. The damage variable of frozen loess is investigated using the following four methods: the stiffness degradation method, the deformation increase method, the dissipated energy increase method, and the constitutive model deducing method during deformation process. In addition, the advantages and disadvantages of the four methods are discussed when they are used for frozen loess material. According to the discussion, the plastic strain may be the most appropriate variable to characterize the damage evolution of frozen loess during the deformation process based on the material properties and the nature of the material service.

ADDED VALUE AS EFFICIENCY CRITERION FOR INDUSTRIAL PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

L. M. Korotkevich

2016-01-01

Full Text Available Literary analysis has shown that the majority of researchers are using classical efficiency criteria for construction of an optimization model for production process: profit maximization; cost minimization; maximization of commercial product output; minimization of back-log for product demand; minimization of total time consumption due to production change. The paper proposes to use an index of added value as an efficiency criterion because it combines economic and social interests of all main interested subjects of the business activity: national government, property owners, employees, investors. The following types of added value have been considered in the paper: joint-stock, market, monetary, economic, notional (gross, net, real. The paper makes suggestion to use an index of real value added as an efficiency criterion. Such approach permits to bring notional added value in comparable variant because added value can be increased not only due to efficiency improvement of enterprise activity but also due to environmental factors – excess in rate of export price increases over rate of import growth. An analysis of methods for calculation of real value added has been made on a country-by-country basis (extrapolation, simple and double deflation. A method of double deflation has been selected on the basis of the executed analysis and it is counted according to the Laspeyires, Paasche, Fischer indices. A conclusion has been made that the used expressions do not take into account fully economic peculiarities of the Republic of Belarus: they are considered as inappropriate in the case when product cost is differentiated according to marketing outlets; they do not take account of difference in rate of several currencies and such approach is reflected in export price of a released product and import price for raw material, supplies and component parts. Taking this into consideration expressions for calculation of real value added have been specified

easyCBM® Reading Criterion Related Validity Evidence: Grades 2-5. Technical Report #1310

Science.gov (United States)

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade 2-5 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Gates-MacGinitie Reading Tests and the Dynamic…

A criterion of contamination of the glass surface of photovoltaic batteries

International Nuclear Information System (INIS)

Tursunov, M.N.; Dyskin, V.G.; Yuldashev, I.A. et al.; Park Jeong Hwoan

2015-01-01

The relative change in the coefficient of efficiency is chosen as a criterion for contamination of the glass surface of a photovoltaic battery. Using the formula obtained, the results of measurements of the transmission coefficient of a contaminated glass plate after its exposure to open air in the center of Tashkent for 80 and 110 days are processed. It is shown that the contamination of the glass plate reduces the coefficient of efficiency of the PVB by 50.0%. (authors)

Unified criterion for security of secret sharing in terms of violation of Bell inequalities

International Nuclear Information System (INIS)

Sen, Aditi; Sen, Ujjwal; Zukowski, Marek

2003-01-01

In secret sharing protocols, a secret is to be distributed among several partners such that leaving out any number of them, the rest do not have the complete information. Strong multiqubit correlations in the state by which secret sharing is carried out had been proposed as a criterion for security of such protocols against individual attacks by an eavesdropper. However we show that states with weak multiqubit correlations can also be used for secure secret sharing. That our state has weak multiqubit correlations is shown from the perspective of violation of local realism, and also by showing that its higher-order correlations are described by lower ones. We then present a unified criterion for security of secret sharing in terms of violation of local realism, which works when the secret sharing state is the Greenberger-Horne-Zeilinger state (with strong multiqubit correlations), as well as states of a different class (with weak multiqubit correlations)

Development of a stress-induced martensitic transformation criterion for a Cu–Al–Be polycrystalline shape memory alloy undergoing uniaxial tension

International Nuclear Information System (INIS)

García-Castillo, F.N.; Cortés-Pérez, J.; Amigó, V.; Sánchez-Arévalo, F.M.; Lara-Rodríguez, G.A.

2015-01-01

This study presents a criterion for predicting the martensitic variants (MVs) that appear during the stress-induced martensitic transformation (SIMT) in a polycrystalline sample of Cu–11.5% wt. Al–0.5% wt. Be under simple tension. Our criterion is based on crystallographic parameters, such as the crystal orientation and Schmid factor (SF). The displacement vector fields (DVFs) were obtained in the observation system by a mathematical model and were used to distort the boundary of a set of grains. From the DVF, the strain tensor for each grain was obtained, and the strain ratio (SR) in the observation system was calculated. Electron backscattering diffraction (EBSD) measurements were performed to determine the crystal orientation of the grains. The inverse SF was used to determine the in-plane stress transformation diagrams (STDs) for each studied grain. The combination of a balance criterion (BC) and STD provided a criterion that allowed us to predict the possible order of stress-induced MVs formed as a function of the crystal orientation and thermomechanical parameters of the shape memory alloy (SMA) with higher accuracy than when using the criteria separately. To validate our criteria, we tested other researchers’ published results. Our results were in agreement and were capable of predicting the stress-induced MVs in a polycrystalline SMA

A criterion for testing hypotheses about the covariance function of a stationary Gaussian stochastic process

OpenAIRE

Kozachenko, Yuriy; Troshki, Viktor

2015-01-01

We consider a measurable stationary Gaussian stochastic process. A criterion for testing hypotheses about the covariance function of such a process using estimates for its norm in the space $L_p(\\mathbb {T}),\\,p\\geq1$, is constructed.

A study on the criterions of lean burn limit for an LPG EFI engine. Paper no. IGEC-1-140

International Nuclear Information System (INIS)

Li, L.; Wang, Z.; Xiao, Z.; Wang, H.; Deng, B.; Su, Y.

2005-01-01

Based on electronic low-pressure gaseous injection, the comparing analysis of several methods for the criterions of lean burn limit in an LPG engine is presented. Experiments are carried out in a single cylinder, four-stroke, water-cooled, 125cc engine with electronic LPG injection. According to the analysis of multi-parameters in and out cylinder, it shows that variation coefficient of indicated pressure which is the classical judgment of lean burn limit, the HC emission, HC emission rising gradient, the misfiring rate and the variation coefficient of the crank angle of the maximum combustion pressure can be as the criterions for lean burn limit. For the test engine, 15% as variation coefficient of indicative mean pressure, 500 x 10 -6 as HC emission, 2000 x 10 -6 as HC emission rising ratio, 1% as misfiring rate and 50% as variation coefficient of the crank angle of the maximum combustion pressure can be as the judgment criterions of LPG lean burn limits. (author)

Hierarchical Bayesian models to assess between- and within-batch variability of pathogen contamination in food.

Science.gov (United States)

Commeau, Natalie; Cornu, Marie; Albert, Isabelle; Denis, Jean-Baptiste; Parent, Eric

2012-03-01

Assessing within-batch and between-batch variability is of major interest for risk assessors and risk managers in the context of microbiological contamination of food. For example, the ratio between the within-batch variability and the between-batch variability has a large impact on the results of a sampling plan. Here, we designed hierarchical Bayesian models to represent such variability. Compatible priors were built mathematically to obtain sound model comparisons. A numeric criterion is proposed to assess the contamination structure comparing the ability of the models to replicate grouped data at the batch level using a posterior predictive loss approach. Models were applied to two case studies: contamination by Listeria monocytogenes of pork breast used to produce diced bacon and contamination by the same microorganism on cold smoked salmon at the end of the process. In the first case study, a contamination structure clearly exists and is located at the batch level, that is, between batches variability is relatively strong, whereas in the second a structure also exists but is less marked. © 2012 Society for Risk Analysis.

Forming limit prediction by an evolving non-quadratic yield criterion considering the anisotropic hardening and r-value evolution

Science.gov (United States)

Lian, Junhe; Shen, Fuhui; Liu, Wenqi; Münstermann, Sebastian

2018-05-01

The constitutive model development has been driven to a very accurate and fine-resolution description of the material behaviour responding to various environmental variable changes. The evolving features of the anisotropic behaviour during deformation, therefore, has drawn particular attention due to its possible impacts on the sheet metal forming industry. An evolving non-associated Hill48 (enHill48) model was recently proposed and applied to the forming limit prediction by coupling with the modified maximum force criterion. On the one hand, the study showed the significance to include the anisotropic evolution for accurate forming limit prediction. On the other hand, it also illustrated that the enHill48 model introduced an instability region that suddenly decreases the formability. Therefore, in this study, an alternative model that is based on the associated flow rule and provides similar anisotropic predictive capability is extended to chapter the evolving effects and further applied to the forming limit prediction. The final results are compared with experimental data as well as the results by enHill48 model.

Choice of the thermodynamic variables

International Nuclear Information System (INIS)

Balian, R.

1985-09-01

Some basic ideas of thermodynamics and statistical mechanics, both at equilibrium and off equilibrium, are recalled. In particular, the selection of relevant variables which underlies any macroscopic description is discussed, together with the meaning of the various thermodynamic quantities, in order to set the thermodynamic approaches used in nuclear physics in a general prospect [fr

Multi-criteria Ranking Under Pareto Inclusive Criterion of Preference: An Application in Ranking Some Fungi Species with Respect to Their Toxicity

Directory of Open Access Journals (Sweden)

Gniadek Agnieszka

2014-12-01

Full Text Available This study aims at demonstrating the usefulness of the Pareto in- clusive criterion methodology for comparative analyses of fungi toxicity. The toxicity of fungi is usually measured using a scale of several ranks. In practice, the ranks of toxicity are routinely grouped into only four conventional classes of toxicity: from a class of no toxicity, low toxicity, and moderate toxicity, to a class of high toxicity. The illustrative material included the N = 61 fungi samples obtained from three species: A. ochraceus, A. niger and A. flavus. In accordance with the Pareto approach, four partial criterions of the worst toxi- city were defined, a single criterion used for each conventional class of toxicity. Finally, the odds ratios (OR were calculated separately for each partial cri- terion, and the significance of the hypotheses OR = 1 was estimated. It was stated that A. ochraceus fungi are distinctly more toxic than the two remaining ones with respect to the all considered four partial criterions, with significance equal to p = 0.04, p = 0.04, p = 0.007 and p = 0.005, respectively. Thus, the suggested method illustrated its utility in the case under study.

Criterion for traffic phases in single vehicle data and empirical test of a microscopic three-phase traffic theory

International Nuclear Information System (INIS)

Kerner, Boris S; Klenov, Sergey L; Hiller, Andreas

2006-01-01

Based on empirical and numerical microscopic analyses, the physical nature of a qualitatively different behaviour of the wide moving jam phase in comparison with the synchronized flow phase-microscopic traffic flow interruption within the wide moving jam phase-is found. A microscopic criterion for distinguishing the synchronized flow and wide moving jam phases in single vehicle data measured at a single freeway location is presented. Based on this criterion, empirical microscopic classification of different local congested traffic states is performed. Simulations made show that the microscopic criterion and macroscopic spatiotemporal objective criteria lead to the same identification of the synchronized flow and wide moving jam phases in congested traffic. Microscopic models in the context of three-phase traffic theory have been tested based on the microscopic criterion for the phases in congested traffic. It is found that microscopic three-phase traffic models can explain both microscopic and macroscopic empirical congested pattern features. It is obtained that microscopic frequency distributions for vehicle speed difference as well as fundamental diagrams and speed correlation functions can depend on the spatial co-ordinate considerably. It turns out that microscopic optimal velocity (OV) functions and time headway distributions are not necessarily qualitatively different, even if local congested traffic states are qualitatively different. The reason for this is that important spatiotemporal features of congested traffic patterns are lost in these as well as in many other macroscopic and microscopic traffic characteristics, which are widely used as the empirical basis for a test of traffic flow models, specifically, cellular automata traffic flow models

Novel Variable Structure Measurement System with Intelligent Components for Flight Vehicles

Directory of Open Access Journals (Sweden)

Shen Kai

2017-06-01

Full Text Available The paper presents a method of developing a variable structure measurement system with intelligent components for flight vehicles. In order to find a distinguishing feature of a variable structure, a numerical criterion for selecting measuring sensors is proposed by quantifying the observability of different states of the system. Based on the Peter K. Anokhin’s theory of functional systems, a mechanism of “action acceptor” is built with intelligent components, e.g. self-organization algorithms. In this mechanism, firstly, prediction models of system states are constructed using self-organization algorithms; secondly, the predicted and measured values are compared; thirdly, an optimal structure of the measurement system is finally determined based on the results of comparison. According to the results of simulation with practical data and experiments obtained during field tests, the novel developed measurement system has the properties of high-accuracy, reliable operation and fault tolerance.

Sequential lineups: shift in criterion or decision strategy?

Science.gov (United States)

Gronlund, Scott D

2004-04-01

R. C. L. Lindsay and G. L. Wells (1985) argued that a sequential lineup enhanced discriminability because it elicited use of an absolute decision strategy. E. B. Ebbesen and H. D. Flowe (2002) argued that a sequential lineup led witnesses to adopt a more conservative response criterion, thereby affecting bias, not discriminability. Height was encoded as absolute (e.g., 6 ft [1.83 m] tall) or relative (e.g., taller than). If a sequential lineup elicited an absolute decision strategy, the principle of transfer-appropriate processing predicted that performance should be best when height was encoded absolutely. Conversely, if a simultaneous lineup elicited a relative decision strategy, performance should be best when height was encoded relatively. The predicted interaction was observed, providing direct evidence for the decision strategies explanation of what happens when witnesses view a sequential lineup.

ENSEMBLE VARIABILITY OF NEAR-INFRARED-SELECTED ACTIVE GALACTIC NUCLEI

International Nuclear Information System (INIS)

Kouzuma, S.; Yamaoka, H.

2012-01-01

We present the properties of the ensemble variability V for nearly 5000 near-infrared active galactic nuclei (AGNs) selected from the catalog of Quasars and Active Galactic Nuclei (13th Edition) and the SDSS-DR7 quasar catalog. From three near-infrared point source catalogs, namely, Two Micron All Sky Survey (2MASS), Deep Near Infrared Survey (DENIS), and UKIDSS/LAS catalogs, we extract 2MASS-DENIS and 2MASS-UKIDSS counterparts for cataloged AGNs by cross-identification between catalogs. We further select variable AGNs based on an optimal criterion for selecting the variable sources. The sample objects are divided into subsets according to whether near-infrared light originates by optical emission or by near-infrared emission in the rest frame; and we examine the correlations of the ensemble variability with the rest-frame wavelength, redshift, luminosity, and rest-frame time lag. In addition, we also examine the correlations of variability amplitude with optical variability, radio intensity, and radio-to-optical flux ratio. The rest-frame optical variability of our samples shows negative correlations with luminosity and positive correlations with rest-frame time lag (i.e., the structure function, SF), and this result is consistent with previous analyses. However, no well-known negative correlation exists between the rest-frame wavelength and optical variability. This inconsistency might be due to a biased sampling of high-redshift AGNs. Near-infrared variability in the rest frame is anticorrelated with the rest-frame wavelength, which is consistent with previous suggestions. However, correlations of near-infrared variability with luminosity and rest-frame time lag are the opposite of these correlations of the optical variability; that is, the near-infrared variability is positively correlated with luminosity but negatively correlated with the rest-frame time lag. Because these trends are qualitatively consistent with the properties of radio-loud quasars reported

An existential criterion for normal and abnormal personality in the works of Erich Fromm.

Directory of Open Access Journals (Sweden)

Kapustin S.A.

2015-06-01

Full Text Available This is the first of four articles scheduled for publication in this journal on the position people with normal and abnormal personalities take in regard to so-called existential dichotomies. The main objective of this article is to propose a new, existential criterion for normal and abnormal personality implicitly present in the works of Erich Fromm. According to this criterion, normal and abnormal personalities are determined, first, by special features of the content of their position regarding existential dichotomies, and, second, by particular aspects of the formation of this position. Such dichotomies, entitatively existent in all human life, are inherent, two-alternative contradictions. The position of a normal personality in its content orients one toward a contradictious predetermination of life in the form of existential dichotomies and the necessity of searching for compromise in resolving these dichotomies. This position is created on a rational basis with the person’s active participation. The position of an abnormal personality in its content subjectively denies a contradictious predetermination of life in the form of existential dichotomies and orients one toward a consistent, noncompetitive, and, as a consequence, one-sided way of life that doesn’t include self-determination. This position is imposed by other people on an irrational basis. Abnormal personality interpreted like this is one of the most important factors influencing the development of various kinds of psychological problems and mental disorders — primarily, neurosis. In the following three articles it will be shown that this criterion is also implicitly present in the theories of personality devised by Sigmund Freud, Alfred Adler, Carl Jung, Carl Rogers, and Viktor Frankl.

Pigment dispersion and Artisan phakic intraocular lenses: crystalline lens rise as a safety criterion.

Science.gov (United States)

Baïkoff, Georges; Bourgeon, Grégoire; Jodai, Horacio Jitsuo; Fontaine, Aline; Lellis, Fernando Viera; Trinquet, Laure

2005-04-01

To validate the theory that crystalline lens rise can be used as a safety criterion to prevent pigment dispersion in eyes with an Artisan phakic intraocular lens (IOL) (Ophtec BV). Monticelli Clinic, Marseilles, France. A comparative analysis of crystalline lens rise in 9 eyes with pigment dispersion and 78 eyes without dispersion was performed. All eyes had previous implantation of an Artisan IOL. Anterior segment imaging was done using an anterior chamber optical coherence tomography (AC OCT) prototype. Crystalline lens rise was defined by the distance between the anterior pole of the crystalline lens and the horizontal plane joining the opposite iridocorneal recesses. The study confirmed that crystalline lens rise can be considered a safety criterion for implantation of Artisan-type phakic IOLs. The higher the crystalline lens rise, the greater the risk for developing pigment dispersion in the area of the pupil. This complication occurred more frequently in hyperopic eyes than in myopic eyes. Results indicate there is little or no risk for pigment dispersion if the rise is less than 600 microm; 67% of eyes with a rise of 600 microm or more developed pupillary pigment dispersion. In some cases in which the IOL was loosely fixated, there was no traction on the iris root and dispersion was prevented or delayed. Crystalline lens rise should be considered a new safety criterion for Artisan phakic IOL implantation and should also be applied to other types of phakic IOLs. The distance remaining between the crystalline lens rise and a 600 microm theoretical safety level allows one to calculate how long the IOL can safely remain in the eye.

Determination of the initiation of ductile tearing in cracked branch pipes on the basis of a pre-determined criterion using small specimens

International Nuclear Information System (INIS)

Chapuliot, S.; Marie, S.

1999-01-01

This article describes an experimental and numerical study of the initiation conditions of ductile tearing in ferritic materials. An initial criterion J i is determined experimentally using a sufficiently thick CT specimen. The numerical and experimental aspects are then discussed for thinner CT specimen and a method is proposed for determining it in thin test samples. The local ductile tear initiation criterion, which was determined on the basis of 3D finite element calculations, was applied to a cracked branch pipe geometry subjected to out-of-plane bending to compare the load estimates at the start of propagation and the values measured during the test. The results of the comparison were highly satisfactory: the criterion is predictive. (orig.)

Generalized Bohm’s criterion and negative anode voltage fall in electric discharges

Energy Technology Data Exchange (ETDEWEB)

Londer, Ya. I.; Ul’yanov, K. N., E-mail: kulyanov@vei.ru [Lenin All-Russian Electrotechnical Institute (Russian Federation)

2013-10-15

The value of the voltage fall across the anode sheath is found as a function of the current density. Analytic solutions are obtained in a wide range of the ratio of the directed velocity of plasma electrons v{sub 0} to their thermal velocity v{sub T}. It is shown that the voltage fall in a one-dimensional collisionless anode sheath is always negative. At the small values of v{sub 0}/v{sub T}, the obtained expression asymptotically transforms into the Langmuir formula. Generalized Bohm’s criterion for an electric discharge with allowance for the space charge density ρ(0), electric field E(0), ion velocity v{sub i}(0), and ratio v{sub 0}/v{sub T} at the plasma-sheath interface is formulated. It is shown that the minimum value of the ion velocity v{sub i}{sup *}(0) corresponds to the vanishing of the electric field at one point inside the sheath. The dependence of v{sub i}{sup *} (0) on ρ(0), E(0), and v{sub 0}/v{sub T} determines the boundary of the existence domain of stationary solutions in the sheath. Using this criterion, the maximum possible degree of contraction of the electron current at the anode is determined for a short high-current vacuum arc discharge.

Generalized Bohm’s criterion and negative anode voltage fall in electric discharges

International Nuclear Information System (INIS)

Londer, Ya. I.; Ul’yanov, K. N.

2013-01-01

The value of the voltage fall across the anode sheath is found as a function of the current density. Analytic solutions are obtained in a wide range of the ratio of the directed velocity of plasma electrons v 0 to their thermal velocity v T . It is shown that the voltage fall in a one-dimensional collisionless anode sheath is always negative. At the small values of v 0 /v T , the obtained expression asymptotically transforms into the Langmuir formula. Generalized Bohm’s criterion for an electric discharge with allowance for the space charge density ρ(0), electric field E(0), ion velocity v i (0), and ratio v 0 /v T at the plasma-sheath interface is formulated. It is shown that the minimum value of the ion velocity v i * (0) corresponds to the vanishing of the electric field at one point inside the sheath. The dependence of v i * (0) on ρ(0), E(0), and v 0 /v T determines the boundary of the existence domain of stationary solutions in the sheath. Using this criterion, the maximum possible degree of contraction of the electron current at the anode is determined for a short high-current vacuum arc discharge

Predicting the required number of training samples. [for remotely sensed image data based on covariance matrix estimate quality criterion of normal distribution

Science.gov (United States)

Kalayeh, H. M.; Landgrebe, D. A.

1983-01-01

A criterion which measures the quality of the estimate of the covariance matrix of a multivariate normal distribution is developed. Based on this criterion, the necessary number of training samples is predicted. Experimental results which are used as a guide for determining the number of training samples are included. Previously announced in STAR as N82-28109

An existential criterion for normal and abnormal personality in the works of Sigmund Freud and Alfred Adler.

Directory of Open Access Journals (Sweden)

Kapustin S.A.

2015-07-01

Full Text Available This is the second in a series of four articles scheduled for publication in this journal. In the previous article I proposed a description of a new so-called existential criterion of normal and abnormal personality that is implicitly present in the works of Erich Fromm. According to this criterion, normal and abnormal personalities are determined, first, by special features of the content of their position regarding existential dichotomies that are natural to human beings and, second, by particular aspects of the formation of this position. Such dichotomies, entitatively existent in all human life, are inherent, two-alternative contradictions. The position of a normal personality in its content orients one toward a contradictious predetermination of life in the form of existential dichotomies and the necessity of searching for compromise in resolving these dichotomies. This position is created on a rational basis with the person’s active participation. The position of an abnormal personality in its content subjectively denies a contradictious predetermination of life in the form of existential dichotomies and orients one toward a consistent, noncompetitive, and, as a consequence, one-sided way of life that doesn’t include self-determination. This position is imposed by other people on an irrational basis. Abnormality of personality interpreted like that is one of the most important factors influencing the development of various kinds of psychological problems and mental disorders — primarily, neurosis. In this article I show that this criterion is implicitly present in the personality theories of Sigmund Freud and Alfred Adler, although in more special cases. In the following articles I will show that this criterion is also implicitly present in the personality theories of Carl Jung, Carl Rogers, and Viktor Frankl.

When to trust our learners? Clinical teachers' perceptions of decision variables in the entrustment process.

Science.gov (United States)

Duijn, Chantal C M A; Welink, Lisanne S; Bok, Harold G J; Ten Cate, Olle T J

2018-06-01

Clinical training programs increasingly use entrustable professional activities (EPAs) as focus of assessment. However, questions remain about which information should ground decisions to trust learners. This qualitative study aimed to identify decision variables in the workplace that clinical teachers find relevant in the elaboration of the entrustment decision processes. The findings can substantiate entrustment decision-making in the clinical workplace. Focus groups were conducted with medical and veterinary clinical teachers, using the structured consensus method of the Nominal Group Technique to generate decision variables. A ranking was made based on a relevance score assigned by the clinical teachers to the different decision variables. Field notes, audio recordings and flip chart lists were analyzed and subsequently translated and, as a form of axial coding, merged into one list, combining the decision variables that were similar in their meaning. A list of 11 and 17 decision variables were acknowledged as relevant by the medical and veterinary teacher groups, respectively. The focus groups yielded 21 unique decision variables that were considered relevant to inform readiness to perform a clinical task on a designated level of supervision. The decision variables consisted of skills, generic qualities, characteristics, previous performance or other information. We were able to group the decision variables into five categories: ability, humility, integrity, reliability and adequate exposure. To entrust a learner to perform a task at a specific level of supervision, a supervisor needs information to support such a judgement. This trust cannot be credited on a single case at a single moment of assessment, but requires different variables and multiple sources of information. This study provides an overview of decision variables giving evidence to justify the multifactorial process of making an entrustment decision.

Criterion of independence applied to personnel responsible for in-house verification

International Nuclear Information System (INIS)

Pavaux, F.

1982-01-01

Framatome's experience has shown that one of the most difficult criteria to interpret in applying quality assurance programmes is that of ''organization''. In particular, this requires that personnel responsible for in-house verification should have ''sufficient independence''. The author examines how Framatome interprets the criterion of sufficient independence. It may seem easy to deal with this problem on paper, by redistributing the boxes of the organizational chart, but to do so is both unrealistic and deceptive; the development of reference models runs into difficulties when it comes to practical application and these difficulties alone justify trying another approach to the problem. The method advocated here consists in analysing each situation as it arises, taking into account the criterion in question, and disregarding any pre-defined model or reference situation. The analysis should involve all quality assurance functions and not, as is too often the case, only the independence of the quality assurance service. The analysis should also examine organizational freedom and independence from direct pressures of cost and schedule considerations. To support this recommendation, three standard cases are described (manufacturing control, design verification, on-site inspection team) which demonstrate how these criteria can give rise to different difficulties in different cases. The author concludes that, in contrast to other criteria so often applied by successive approximations, organizational changes should only be decided upon when absolutely necessary and after a detailed analysis of the particular case in question has been performed. (author)

A PWR PCI failure criterion to burnups of 60 GW·d/t using the ENIGMA code

International Nuclear Information System (INIS)

Clarke, A.P.; Tempest, P.A.; Shea, J.H.

2000-01-01

A fuel performance modelling code (ENIGMA) has been used to analyse the empirical PCI failure criterion in terms of a clad failure stress as a function of burnup and fast neutron dose. The Studsvik database has been analysed. Results indicate a rising and then saturating failure stress with burnup and fast neutron dose. Using the PCI failure limits, equivalent to 95/95 confidence limits, an ENIGMA stress-based methodology is used to derive PWR PCI failure limits up to 60 GW·d/t U using a conservative assumption that the failure stress does not increase at high burnup and neutron dose. In addition experimental ramp data on gadolinia-doped fuel rods do not indicate any increased susceptibility to PCI failure implying that the UO 2 criterion can be used for gadolinia doped fuel. (author)

QV modal distance displacement - a criterion for contingency ranking

Energy Technology Data Exchange (ETDEWEB)

Rios, M.A.; Sanchez, J.L.; Zapata, C.J. [Universidad de Los Andes (Colombia). Dept. of Electrical Engineering], Emails: mrios@uniandes.edu.co, josesan@uniandes.edu.co, cjzapata@utp.edu.co

2009-07-01

This paper proposes a new methodology using concepts of fast decoupled load flow, modal analysis and ranking of contingencies, where the impact of each contingency is measured hourly taking into account the influence of each contingency over the mathematical model of the system, i.e. the Jacobian Matrix. This method computes the displacement of the reduced Jacobian Matrix eigenvalues used in voltage stability analysis, as a criterion of contingency ranking, considering the fact that the lowest eigenvalue in the normal operation condition is not the same lowest eigenvalue in N-1 contingency condition. It is made using all branches in the system and specific branches according to the IBPF index. The test system used is the IEEE 118 nodes. (author)

Testing of variables which affect stablity of cement solidified low-level waste

International Nuclear Information System (INIS)

Boris, G.F.

1989-01-01

This paper describes the test program undertaken to investigate variables which could affect the stability of cement solidified low-level waste and to evaluate the effect of these variables on certain tests prescribed in the Technical Position on Waste Form. The majority of the testing was performed on solidified undepleted bead resin, however, six additional waste types, suggested by the NRC, were tested. The tested variables included waste loading, immersion duration, depletion level, ambient cure duration, curing environment, immersion medium and waste type. Of these, lower waste loadings, longer ambient cures prior to testing and immersion in demineralized water versus simulated sea water and potable water resulted in higher compressive strengths for bead resin samples. Immersion times longer than 90 days did not affect the resin samples. Compressive strengths for other waste types varied depending upon the waste. The strengths of all waste types exceeded the minimum criterion by at least a factor of four, up to a factor of forty. The higher waste loadings exhibit strengths less than the lower waste loadings

Relationships between Classroom Schedule Types and Performance on the Algebra I Criterion-Referenced Test

Science.gov (United States)

Murray, Gregory V.; Moyer-Packenham, Patricia S.

2014-01-01

One option for length of individual mathematics class periods is the schedule type selected for Algebra I classes. This study examined the relationship between student achievement, as indicated by Algebra I Criterion-Referenced Test scores, and the schedule type for Algebra I classes. Data obtained from the Utah State Office of Education included…

For reflexivity as an epistemic criterion of ontological coherence and virtuous social theorizing.

Science.gov (United States)

Bouzanis, Christoforos

2017-12-01

This article offers an approach that combines, on the one hand, the philosophical notion of reflexivity, which is related to the ideas of self-reference and paradox, and, on the other hand, the sociological discussion of epistemic reflexivity as a problem of coherence, which was mainly initiated by certain branches of ethnomethodology and social constructionism. This combinatory approach argues for reflexivity as an epistemic criterion of ontological coherence , which suggests that social ontologies should account for the possibility of self-reflective subjectivity - for otherwise they result in a paradoxical conclusion according to which a social scientist reflects on her or his ontological commitments even though these commitments deny her or him the capacity for self-reflection . This analysis presupposes that all human sciences are categorically premised on social ontologies; and it argues for an analytical distinction between self-reflection, which refers to the agential capacity for reflecting on one's own commitments, and the epistemic criterion of reflexivity hereby proposed. These two analytically distinct though interdependent socio-theoretical concepts are frequently conflated in the literature; thus, this article also aims at a 'clearing of the ground' that can be of categorical use to the human sciences.

A Vietnamese man with selective mutism: the relevance of multiple interacting 'cultures' in clinical psychiatry.

Science.gov (United States)

Hollifield, Michael; Geppert, Cynthia; Johnson, Yuam; Fryer, Carol

2003-09-01

Multiple cultural variables have effects on the psychobiology and behavioral manifestations of illness, as do patient and physician perceptions of illness. The interaction among these variables is at the heart of clinical psychiatry. This case of a Vietnamese man with selective mutism underscores the relevance of the 'cultures' of medicine, psychiatry, and war and trauma on the manifestations of illness and illness perceptions by patient and physician. The discussion focuses on how these cultures interact and play a crucial role in formulating diagnosis and treatment planning. Suggestions are given for shifts in medical education that will encourage relevant cultural paradigms to make their way into educational and clinical systems, which in turn should improve cultural competence in clinical psychiatry.

Proposal of failure criterion applicable to finite element analysis results for wall-thinned pipes under bending load

Energy Technology Data Exchange (ETDEWEB)

Meshii, Toshiyuki, E-mail: meshii@u-fukui.ac.jp [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui (Japan); Ito, Yoshiaki [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui (Japan)

2012-01-15

Highlights: Black-Right-Pointing-Pointer Limit bending load (LBL) of wall-thinned pipe by large strain FEA was considered. Black-Right-Pointing-Pointer Net section yield load had sufficient margin to LBL. Black-Right-Pointing-Pointer LBL for collapse was the load when volume with nominal thickness yielded. Black-Right-Pointing-Pointer LBL for cracking was the load when flawed section stress exceeded tensile strength. Black-Right-Pointing-Pointer Failure criterion considering above was named Domain Collapse Criterion. - Abstract: In this work, a failure criterion applicable to large strain Finite Element Analysis (FEA) results was proposed in order to predict both the fracture mode (collapse or cracking) and the limit bending load of wall-thinned straight pipes. This work was motivated from the recent experimental results of ; that is, fracture mode is not always collapse, and the fracture mode affects the limit bending load. The key finding in comparing their test results and a detailed large strain FEA results was that the Mises stress distribution at the limit bending load of a flawed cylinder was similar to that of a flawless cylinder; specifically, in case of collapse, the Mises stress exceeded the true yield stress of a material for the whole 'volume' of a cylinder with a nominal wall thickness. Based on this finding, a failure criterion applicable to large strain FEA results of wall-thinned straight pipes under a bending load that can predict both fracture mode and limit bending load was proposed and was named the Domain Collapse Criterion (DCC). DCC predicts the limit bending load as the lower value of either the M{sub c}{sup FEA}, which is the load at which the Mises stress exceeds the true yield strength of a straight pipe for the whole 'volume' with a nominal wall thickness (fracture mode: collapse), or the M{sub c}{sup FEAb}, which is the load at which the Mises stress in a section of the flaw ligament exceeds the true tensile stress

Accounting for sex differences in PTSD: A multi-variable mediation model

Directory of Open Access Journals (Sweden)

Dorte M. Christiansen

2015-01-01

Full Text Available Background: Approximately twice as many females as males are diagnosed with posttraumatic stress disorder (PTSD. However, little is known about why females report more PTSD symptoms than males. Prior studies have generally focused on few potential mediators at a time and have often used methods that were not ideally suited to test for mediation effects. Prior research has identified a number of individual risk factors that may contribute to sex differences in PTSD severity, although these cannot fully account for the increased symptom levels in females when examined individually. Objective: The present study is the first to systematically test the hypothesis that a combination of pre-, peri-, and posttraumatic risk factors more prevalent in females can account for sex differences in PTSD severity. Method: The study was a quasi-prospective questionnaire survey assessing PTSD and related variables in 73.3% of all Danish bank employees exposed to bank robbery during the period from April 2010 to April 2011. Participants filled out questionnaires 1 week (T1, N=450 and 6 months after the robbery (T2, N=368; 61.1% females. Mediation was examined using an analysis designed specifically to test a multiple mediator model. Results: Females reported more PTSD symptoms than males and higher levels of neuroticism, depression, physical anxiety sensitivity, peritraumatic fear, horror, and helplessness (the A2 criterion, tonic immobility, panic, dissociation, negative posttraumatic cognitions about self and the world, and feeling let down. These variables were included in the model as potential mediators. The combination of risk factors significantly mediated the association between sex and PTSD severity, accounting for 83% of the association. Conclusions: The findings suggest that females report more PTSD symptoms because they experience higher levels of associated risk factors. The results are relevant to other trauma populations and to other trauma

Criterion for burn-up conditions in gas-cooled cryogenic current leads

International Nuclear Information System (INIS)

Bejan, A.; Cluss, E.M. Jr.

1976-01-01

Superconducting magnets are energized through helium vapour-cooled cryogenic current leads operating at high ratios of current to mass flow. The high current operation where lead temperature, runaway, and eventual burn-up are likely to occur is investigated. A simple criterion for estimating the burn-up operation conditions (current, mass flow) for a given lead geometry (cross-sectional area, length, heat exchanger area) is presented. This article stresses the role played by the available heat exchanger area in avoiding burn-up at high ratios of current to mass flow. (author)

Deep learning relevance

DEFF Research Database (Denmark)

Lioma, Christina; Larsen, Birger; Petersen, Casper

2016-01-01

train a Recurrent Neural Network (RNN) on existing relevant information to that query. We then use the RNN to "deep learn" a single, synthetic, and we assume, relevant document for that query. We design a crowdsourcing experiment to assess how relevant the "deep learned" document is, compared...... to existing relevant documents. Users are shown a query and four wordclouds (of three existing relevant documents and our deep learned synthetic document). The synthetic document is ranked on average most relevant of all....

Numerical counting ratemeter with variable time constant and integrated circuits

International Nuclear Information System (INIS)

Kaiser, J.; Fuan, J.

1967-01-01

We present here the prototype of a numerical counting ratemeter which is a special version of variable time-constant frequency meter (1). The originality of this work lies in the fact that the change in the time constant is carried out automatically. Since the criterion for this change is the accuracy in the annunciated result, the integration time is varied as a function of the frequency. For the prototype described in this report, the time constant varies from 1 sec to 1 millisec. for frequencies in the range 10 Hz to 10 MHz. This prototype is built entirely of MECL-type integrated circuits from Motorola and is thus contained in two relatively small boxes. (authors) [fr

Ignition criterion for heterogeneous energetic materials based on hotspot size-temperature threshold

Science.gov (United States)

Barua, A.; Kim, S.; Horie, Y.; Zhou, M.

2013-02-01

A criterion for the ignition of granular explosives (GXs) and polymer-bonded explosives (PBXs) under shock and non-shock loading is developed. The formulation is based on integration of a quantification of the distributions of the sizes and locations of hotspots in loading events using a cohesive finite element method (CFEM) developed recently and the characterization by Tarver et al. [C. M. Tarver et al., "Critical conditions for impact- and shock-induced hot spots in solid explosives," J. Phys. Chem. 100, 5794-5799 (1996)] of the critical size-temperature threshold of hotspots required for chemical ignition of solid explosives. The criterion, along with the CFEM capability to quantify the thermal-mechanical behavior of GXs and PBXs, allows the critical impact velocity for ignition, time to ignition, and critical input energy at ignition to be determined as functions of material composition, microstructure, and loading conditions. The applicability of the relation between the critical input energy (E) and impact velocity of James [H. R. James, "An extension to the critical energy criterion used to predict shock initiation thresholds," Propellants, Explos., Pyrotech. 21, 8-13 (1996)] for shock loading is examined, leading to a modified interpretation, which is sensitive to microstructure and loading condition. As an application, numerical studies are undertaken to evaluate the ignition threshold of granular high melting point eXplosive, octahydro-1,3,5,7-tetranitro-1,2,3,5-tetrazocine (HMX) and HMX/Estane PBX under loading with impact velocities up to 350 ms-1 and strain rates up to 105 s-1. Results show that, for the GX, the time to criticality (tc) is strongly influenced by initial porosity, but is insensitive to grain size. Analyses also lead to a quantification of the differences between the responses of the GXs and PBXs in terms of critical impact velocity for ignition, time to ignition, and critical input energy at ignition. Since the framework permits

DSM-IV "criterion A" schizophrenia symptoms across ethnically different populations: evidence for differing psychotic symptom content or structural organization?

Science.gov (United States)

McLean, Duncan; Thara, Rangaswamy; John, Sujit; Barrett, Robert; Loa, Peter; McGrath, John; Mowry, Bryan

2014-09-01

There is significant variation in the expression of schizophrenia across ethnically different populations, and the optimal structural and diagnostic representation of schizophrenia are contested. We contrasted both lifetime frequencies of DSM-IV criterion A (the core symptom criterion of the internationally recognized DSM classification system) symptoms and types/content of delusions and hallucinations in transethnic schizophrenia populations from Australia (n = 776), India (n = 504) and Sarawak, Malaysia (n = 259), to elucidate clinical heterogeneity. Differences in both criterion A symptom composition and symptom content were apparent. Indian individuals with schizophrenia reported negative symptoms more frequently than other sites, whereas individuals from Sarawak reported disorganized symptoms more frequently. Delusions of control and thought broadcast, insertion, or withdrawal were less frequent in Sarawak than Australia. Curiously, a subgroup of 20 Indian individuals with schizophrenia reported no lifetime delusions or hallucinations. These findings potentially challenge the long-held view in psychiatry that schizophrenia is fundamentally similar across cultural groups, with differences in only the content of psychotic symptoms, but equivalence in structural form.

Responder Status Criterion for Stepped Care Trauma-Focused Cognitive Behavioral Therapy for Young Children

Science.gov (United States)

Salloum, Alison; Scheeringa, Michael S.; Cohen, Judith A.; Storch, Eric A.

2015-01-01

Background: In order to develop Stepped Care trauma-focused cognitive behavioral therapy (TF-CBT), a definition of early response/non-response is needed to guide decisions about the need for subsequent treatment. Objective: The purpose of this article is to (1) establish criterion for defining an early indicator of response/non-response to the…

Value Relevance of Accounting and Other Variables in the Junior-Mining Sector

Directory of Open Access Journals (Sweden)

Casey Iddon

2015-03-01

Full Text Available Unique fundamentals and severe uncertainty in the junior-mining-sector (JMS make valuing JMS ventures problematic. However, potentially enormous returns draw many investors into the JMS. While financialinstrument- pricing theory suggests that accounting values/ratios should have little influence on JMS-firm outcomes, this study’s simple OLS and Panel-data findings show strong correlation between those variables and JMS-firm-share prices. After discounting market failure, it is conjectured that JMS nonfinancial factors, share prices and accounting values are co-determined in a simultaneous relationship that is obscurely linked to outcomes. The notions uncovered in this study should greatly interest academics and business sector participants.

Maximum Correntropy Criterion Kalman Filter for α-Jerk Tracking Model with Non-Gaussian Noise

Directory of Open Access Journals (Sweden)

Bowen Hou

2017-11-01

Full Text Available As one of the most critical issues for target track, α -jerk model is an effective maneuver target track model. Non-Gaussian noises always exist in the track process, which usually lead to inconsistency and divergence of the track filter. A novel Kalman filter is derived and applied on α -jerk tracking model to handle non-Gaussian noise. The weighted least square solution is presented and the standard Kalman filter is deduced firstly. A novel Kalman filter with the weighted least square based on the maximum correntropy criterion is deduced. The robustness of the maximum correntropy criterion is also analyzed with the influence function and compared with the Huber-based filter, and, moreover, the kernel size of Gaussian kernel plays an important role in the filter algorithm. A new adaptive kernel method is proposed in this paper to adjust the parameter in real time. Finally, simulation results indicate the validity and the efficiency of the proposed filter. The comparison study shows that the proposed filter can significantly reduce the noise influence for α -jerk model.

Application of all relevant feature selection for failure analysis of parameter-induced simulation crashes in climate models

Science.gov (United States)

Paja, W.; Wrzesień, M.; Niemiec, R.; Rudnicki, W. R.

2015-07-01

The climate models are extremely complex pieces of software. They reflect best knowledge on physical components of the climate, nevertheless, they contain several parameters, which are too weakly constrained by observations, and can potentially lead to a crash of simulation. Recently a study by Lucas et al. (2013) has shown that machine learning methods can be used for predicting which combinations of parameters can lead to crash of simulation, and hence which processes described by these parameters need refined analyses. In the current study we reanalyse the dataset used in this research using different methodology. We confirm the main conclusion of the original study concerning suitability of machine learning for prediction of crashes. We show, that only three of the eight parameters indicated in the original study as relevant for prediction of the crash are indeed strongly relevant, three other are relevant but redundant, and two are not relevant at all. We also show that the variance due to split of data between training and validation sets has large influence both on accuracy of predictions and relative importance of variables, hence only cross-validated approach can deliver robust prediction of performance and relevance of variables.

Study of input variables in group method of data handling methodology

International Nuclear Information System (INIS)

Pereira, Iraci Martinez; Bueno, Elaine Inacio

2013-01-01

The Group Method of Data Handling - GMDH is a combinatorial multi-layer algorithm in which a network of layers and nodes is generated using a number of inputs from the data stream being evaluated. The GMDH network topology has been traditionally determined using a layer by layer pruning process based on a pre-selected criterion of what constitutes the best nodes at each level. The traditional GMDH method is based on an underlying assumption that the data can be modeled by using an approximation of the Volterra Series or Kolmorgorov-Gabor polynomial. A Monitoring and Diagnosis System was developed based on GMDH and ANN methodologies, and applied to the IPEN research Reactor IEA-1. The system performs the monitoring by comparing the GMDH and ANN calculated values with measured ones. As the GMDH is a self-organizing methodology, the input variables choice is made automatically. On the other hand, the results of ANN methodology are strongly dependent on which variables are used as neural network input. (author)

Toward a Unified Representation of Atmospheric Convection in Variable-Resolution Climate Models

Energy Technology Data Exchange (ETDEWEB)

Walko, Robert [Univ. of Miami, Coral Gables, FL (United States)

2016-11-07

The purpose of this project was to improve the representation of convection in atmospheric weather and climate models that employ computational grids with spatially-variable resolution. Specifically, our work targeted models whose grids are fine enough over selected regions that convection is resolved explicitly, while over other regions the grid is coarser and convection is represented as a subgrid-scale process. The working criterion for a successful scheme for representing convection over this range of grid resolution was that identical convective environments must produce very similar convective responses (i.e., the same precipitation amount, rate, and timing, and the same modification of the atmospheric profile) regardless of grid scale. The need for such a convective scheme has increased in recent years as more global weather and climate models have adopted variable resolution meshes that are often extended into the range of resolving convection in selected locations.

Development of a New Gradient Based Strain-Criterion for Prediction of Bendability in Quality Assurance and FEA

Science.gov (United States)

Denninger, Ralf; Liewald, Mathias; Sindel, Manfred

2011-08-01

Numerical simulation systems are more and more used in process development of car bodies. Nowadays, also the hemming process is optimised in FEA. Thus, the analysing of process robustness calls for a failure criterion for the specific bending and hemming load condition. For that purpose the experimental determination of bendability under various pre-load conditions that occur in real production, e.g. during deep drawing in press shop, is content of this contribution. Using these experimental results, a new approach for a strain-gradient based failure criterion for bending operations is presented to optimise bendability prediction. The bending-strain-gradient approach can be used both in production related departments of quality assurance as well as for simulative process design or process validation for vehicle manufacturing planning.

Multiscale analysis of potential fields by a ridge consistency criterion: the reconstruction of the Bishop basement

Science.gov (United States)

Fedi, M.; Florio, G.; Cascone, L.

2012-01-01

We use a multiscale approach as a semi-automated interpreting tool of potential fields. The depth to the source and the structural index are estimated in two steps: first the depth to the source, as the intersection of the field ridges (lines built joining the extrema of the field at various altitudes) and secondly, the structural index by the scale function. We introduce a new criterion, called 'ridge consistency' in this strategy. The criterion is based on the principle that the structural index estimations on all the ridges converging towards the same source should be consistent. If these estimates are significantly different, field differentiation is used to lessen the interference effects from nearby sources or regional fields, to obtain a consistent set of estimates. In our multiscale framework, vertical differentiation is naturally joint to the low-pass filtering properties of the upward continuation, so is a stable process. Before applying our criterion, we studied carefully the errors on upward continuation caused by the finite size of the survey area. To this end, we analysed the complex magnetic synthetic case, known as Bishop model, and evaluated the best extrapolation algorithm and the optimal width of the area extension, needed to obtain accurate upward continuation. Afterwards, we applied the method to the depth estimation of the whole Bishop basement bathymetry. The result is a good reconstruction of the complex basement and of the shape properties of the source at the estimated points.

Criterion of transverse coherence of self-amplified spontaneous emission in high gain free electron laser amplifiers

International Nuclear Information System (INIS)

Xie, M.; Kim, K.J.

1995-01-01

In a high gain free electron laser amplifier based on Self-Amplified Spontaneous Emission (SASE) the spontaneous radiation generated by an electron beam near the undulator entrance is amplified many orders of magnitude along the undulator. The transverse coherence properties of the amplified radiation depends on both the amplification process and the coherence of the seed radiation (the undulator radiation generated in the first gain length or so). The evolution of the transverse coherence in the amplification process is studied based on the solution of the coupled Maxwell-Vlasov equations including higher order transverse modes. The coherence of the seed radiation is determined by the number of coherent modes in the phase space area of the undulator radiation. We discuss the criterion of transverse coherence and identify governing parameters over a broad range of parameters. In particular we re-examine the well known emittance criterion for the undulator radiation, which states that full transverse coherence is guaranteed if the rms emittance is smaller than the wavelength divided by 4π. It is found that this criterion is modified for SASE because of the different optimization conditions required for the electron beam. Our analysis is a generalization of the previous study by Yu and Krinsky for the case of vanishing emittance with parallel electron beam. Understanding the transverse coherence of SASE is important for the X-ray free electron laser projects now under consideration at SLAC and DESY

The relevance of accounting information enclosed in performance indicators

Directory of Open Access Journals (Sweden)

Mihaela-Cristina Onica

2012-12-01

Full Text Available This research study is analyzing the relevance of accounting information reflected through the elaboration of firm performance variables and administration because of the necessity of performance to be administrated. The subject of the theme is enclosed in current development of accounting norms at national , european, (Directives and international levels (IAS/IFRS. The analyised topic is based upon the capabilty of accounting to generate information , throug synthesis calculus being settled the nature , the characteristics and the informational valences of financial performance of an organization. The accounting infromation is base for performing the decison process. The rol of accounting in insurring the relevance and comparability of information increased significantly, being already indispensable. A real solution for communication misunderstanig elimination emerged, as result of diputes in perception and interpretation of economic information, as results for the national speciffic norms.The economic communication is demanding for firm not only in its expression but in thinking and in the process of method conceptualization of organization and administration. A detailed financial situation analysis, which are employing annual financial analysis procedures, underling the performance and risks influencing factors, are considering one starting point for addressing the issue. The introduced variables are insuring a whole vision of firm activity and an appropriate strategy for results significance.

Seismic bearing capacity of strip footings on rock masses using the Hoek–Brown failure criterion

Directory of Open Access Journals (Sweden)

Amin Keshavarz

2016-04-01

Full Text Available In this paper, the bearing capacity of strip footings on rock masses has been studied in the seismic case. The stress characteristics or slip line method was used for analysis. The problem was analyzed in the plane strain condition using the Hoek–Brown failure criterion. First, the equilibrium equations along the stress characteristics were obtained and the rock failure criterion was applied. Then, the equations were solved using the finite difference method. A computer code has been provided for analysis. Given the footing and rock parameters, the code can calculate the stress characteristics network and obtain the stress distribution under the footing. The seismic effects have been applied as the horizontal and vertical pseudo-static coefficients. The results of this paper are very close to those of the other studies. The seismic bearing capacity of weightless rock masses can be obtained using the proposed equations and graphs without calculating the whole stress characteristics network.

Ductile failure analysis of defective API X65 pipes based on stress-modified fracture strain criterion

International Nuclear Information System (INIS)

Oh, Chang Kyun; Kim, Yun Jae; Baek, Jong Hyun; Kim, Young Pyo; Kim, Woo Sik

2006-01-01

A local failure criterion for the API X65 steel is applied to predict ductile failure of full-scale API X65 pipes with simulated corrosion and gouge defects under internal pressure. The local failure criterion is the stress-modified fracture strain for the API X65 steel as a function of the stress triaxiality (defined by the ratio of the hydrostatic stress to the effective stress). Based on detailed FE analyses with the proposed local failure criteria, burst pressures of defective pipes are estimated and compared with experimental data. The predicted burst pressures are in good agreement with experimental data. Noting that an assessment equation against the gouge defect is not yet available, parametric study is performed, from which a simple equation is proposed to predict burst pressure for API X65 pipes with gouge defects

Corotational and Compressibility aspects leading to a modification of the vortex-identification Q-criterion

Czech Academy of Sciences Publication Activity Database

Kolář, Václav; Šístek, Jakub

2015-01-01

Roč. 53, č. 8 (2015), s. 2406-2410 ISSN 0001-1452 R&D Projects: GA ČR GA14-02067S Institutional support: RVO:67985874 ; RVO:67985840 Keywords : vortex * vortex identification * vortex-identification criterion * vortex-identification method * vortical structures Subject RIV: BK - Fluid Dynamics; BA - General Mathematics (MU-W) Impact factor: 1.326, year: 2015