Review of calculational models and computer codes for environmental dose assessment of radioactive releases

Energy Technology Data Exchange (ETDEWEB)

Strenge, D.L.; Watson, E.C.; Droppo, J.G.

1976-06-01

The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given.

Measuring Nanomaterial Release from Carbon Nanotube Composites: Review of the State of the Science

International Nuclear Information System (INIS)

Harper, Stacey; Wohlleben, Wendel; Doa, Maria; Nowack, Bernd; Clancy, Shaun; Canady, Richard; Maynard, Andrew

2015-01-01

Hazard studies of “as-produced” nanomaterials are increasingly available, yet a critical gap exists in exposure science that may impede safe development of nanomaterials. The gap is that we do not understand what is actually released because nanomaterials can change when released in ways that are not understood. We also generally do not have methods capable of quantitatively measuring what is released to support dose assessment. This review presents a case study of multi-walled carbon nanotubes (MWCNTs) for the measurement challenge to bridge this gap. As the use and value of MWCNTs increases, methods to measure what is released in ways relevant to risk evaluation are critically needed if products containing these materials are to be economically, environmentally, and socially sustainable. This review draws on the input of over 50 experts engaged in a program of workshops and technical report writing to address the release of MWCNTs from nanocomposite materials across their life cycle. The expert analyses reveals that new and sophisticated methods are required to measure and assess MWCNT exposures for realistic exposure scenarios. Furthermore, method requirements vary with the materials and conditions of release across life cycle stages of products. While review shows that the likelihood of significant release of MWCNTs appears to be low for many stages of composite life cycle, measurement methods are needed so that exposures from MWCNT-composites are understood and managed. In addition, there is an immediate need to refocus attention from study of “as-produced” nanomaterials to coordinated research on actual release scenarios. (paper)

Dam pre-release as an important operation strategy in reducing flood impact in Malaysia

Science.gov (United States)

Hidayah Ishak, Nurul; Mustafa Hashim, Ahmad

2018-03-01

The 2014 flood was reported to be one of the worst natural disaster has ever affected several states in the northern part of Peninsular Malaysia. Overwhelming rainfall was noted as one of the main factors causing such impact, which was claimed to be unprecedented to some extent. The state of Perak, which is blessed with four cascading dams had also experienced flood damage at a scale that was considered the worst in history. The rainfall received had caused the dam to reach danger level that necessitated additional discharge to be released. Safety of the dams was of great importance and such unavoidable additional discharge was allowed to avoid catastrophic failure of the dam structures. This paper discusses the dam pre-release as a significant dam management strategy in reducing flood impact. An important balance between required dam storage to be maintained and the risk element that can be afforded is the crucial factor in such enhanced operation strategy. While further possibility in developing a carefully engineered dam pre-release strategy can be explored for dam operation in Malaysia, this has already been introduced in some developed countries. Australia and South Africa are examples where pre-release has been practiced and proven to reduce flood risk. The concept involves controlling the dam lake level throughout the year, in reference to the rainfall data and the hydrological properties for the catchment area of the dams. Plentiful data analysis need to be done in contemplation of producing the optimal pre-release model. The amount of heavy rainfalls received is beyond human control but the distribution of the discharge from the dams can be further managed with the appropriate pre-release strategy.

How important is importance for prospective memory? A review

Directory of Open Access Journals (Sweden)

Stefan eWalter

2014-06-01

Full Text Available Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event- or activity-based, cognitive loads, and cue focality. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research.

How important is importance for prospective memory? A review

Science.gov (United States)

Walter, Stefan; Meier, Beat

2014-01-01

Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event-, or activity-based), cognitive loads, and processing overlaps. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research. PMID:25018743

Potential release of in vivo trace metals from metallic medical implants in the human body: from ions to nanoparticles--a systematic analytical review.

Science.gov (United States)

Matusiewicz, Henryk

2014-06-01

Metal ion release from metallic materials, e.g. metallic alloys and pure metals, implanted into the human body in dental and orthopedic surgery is becoming a major cause for concern. This review briefly provides an overview of both metallic alloys and pure metals used in implant materials in dental and orthopedic surgery. Additionally, a short section is dedicated to important biomaterials and their corrosive behavior in both real solutions and various types of media that model human biological fluids and tissues. The present review gives an overview of analytical methods, techniques and different approaches applied to the measurement of in vivo trace metals released into body fluids and tissues from patients carrying metal-on-metal prostheses and metal dental implants. Reference levels of ion concentrations in body fluids and tissues that have been determined by a host of studies are compiled, reviewed and presented in this paper. Finally, a collection of published clinical data on in vivo released trace metals from metallic medical implants is included. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

A review and perspective of existing research on the release of nanomaterials from solid nanocomposites.

Science.gov (United States)

Froggett, Stephan J; Clancy, Shaun F; Boverhof, Darrell R; Canady, Richard A

2014-04-07

Advances in adding nanomaterials to various matrices have occurred in tandem with the identification of potential hazards associated with exposure to pure forms of nanomaterials. We searched multiple research publication databases and found that, relative to data generated on potential nanomaterial hazards or exposures, very little attention has focused on understanding the potential and conditions for release of nanomaterials from nanocomposites. However, as a prerequisite to exposure studying release is necessary to inform risk assessments. We identified fifty-four studies that specifically investigated the release of nanomaterials, and review them in the following release scenario groupings: machining, weathering, washing, contact and incineration. While all of the identified studies provided useful information, only half were controlled experiments. Based on these data, the debris released from solid, non-food nanocomposites contains in varying frequencies, a mixture of four types of debris. Most frequently identified are (1) particles of matrix alone, and slightly less often, the (2) matrix particles exhibit the nanomaterial partially or fully embedded; far less frequently is (3) the added nanomaterial entirely dissociated from the matrix identified: and most rare are (4) dissolved ionic forms of the added nanomaterial. The occurrence of specific debris types appeared to be dependent on the specific release scenario and environment. These data highlight that release from nanocomposites can take multiple forms and that additional research and guidance would be beneficial, allowing for more consistent characterization of the release potential of nanomaterials. In addition, these data support calls for method validation and standardization, as well as understanding how laboratory release scenarios relate to real-world conditions. Importantly, as risk is considered to be a function of the inherent hazards of a substance and the actual potential for exposure, data

Natural and technologic hazardous material releases during and after natural disasters: a review.

Science.gov (United States)

Young, Stacy; Balluz, Lina; Malilay, Josephine

2004-04-25

Natural disasters may be powerful and prominent mechanisms of direct and indirect hazardous material (hazmat) releases. Hazardous materials that are released as the result of a technologic malfunction precipitated by a natural event are referred to as natural-technologic or na-tech events. Na-tech events pose unique environmental and human hazards. Disaster-associated hazardous material releases are of concern, given increases in population density and accelerating industrial development in areas subject to natural disasters. These trends increase the probability of catastrophic future disasters and the potential for mass human exposure to hazardous materials released during disasters. This systematic review summarizes direct and indirect disaster-associated releases, as well as environmental contamination and adverse human health effects that have resulted from natural disaster-related hazmat incidents. Thorough examination of historic disaster-related hazmat releases can be used to identify future threats and improve mitigation and prevention efforts.

Naltrexone sustained-release/bupropion sustained-release for the management of obesity: review of the data to date

Directory of Open Access Journals (Sweden)

Caixàs A

2014-09-01

Full Text Available Assumpta Caixàs, Lara Albert, Ismael Capel, Mercedes Rigla Endocrinology and Nutrition Department, Parc Tauli Sabadell University Hospital, Autonomous University of Barcelona, Barcelona, Spain Abstract: Obesity is an emerging disease worldwide. Changes in living habits, especially with increased consumption of high-calorie foods and decreased levels of physical activity, lead to an energy imbalance that brings weight gain. Overweight and obesity are major risk factors for several chronic diseases (including cardiovascular diseases, diabetes, and cancer, reduce quality of life, and are associated with higher mortality. For all these reasons, it is of the utmost importance that the trend be reversed and obese people enabled to lose weight. It is known that eating a healthy diet and exercising regularly can help prevent obesity, but data show that in many cases these steps are not enough. This is the reason why, over the last few decades, several antiobesity drugs have been developed. However, the disappointing results demonstrated for the vast majority of them have not discouraged the pharmaceutical industry from continuing to look for an effective drug or combination of drugs. The systematic review presented here focuses on naltrexone sustained-release/bupropion sustained-release combination (Contrave®. We conclude from the current published reports that its effectiveness in the treatment of obesity can be estimated as a placebo-subtracted weight loss of around 4.5%. This weight reduction is moderate but similar to other antiobesity drugs. The safety profile of this combination is acceptable, despite additional data regarding cardiovascular disease being needed. Keywords: Contrave, weight loss, overweight, cardiovascular disease, diabetes, cancer

Fission product release mechanisms and groupings

International Nuclear Information System (INIS)

Iglesia, F.C.; Brito, A.C.; Liu, Y.

1995-01-01

During CANDU postulated accidents the reactor fuel is estimated to be exposed to a variety of conditions. These conditions are dynamic and, during the course of an accident, the fuel may experience a wide range of temperatures and conditions from highly oxidizing to mildly reducing environments. The exposure of the reactor fuel to these environments and temperatures may affect its stoichiometry and release performance. In this paper a review of the important fission product release mechanisms is presented, the results of three out-of-pile experimental programs are summarized, and fission product release groups, for both oxidizing and reducing conditions are proposed. (author)

Soluble microbial products (SMPs release in activated sludge systems: a review

Directory of Open Access Journals (Sweden)

Azami Hamed

2012-12-01

Full Text Available Abstract This review discusses the characterization, production and implications of soluble microbial products (SMPs in biological wastewater treatment. The precise definition of SMPs is open to talk about, but is currently regarded as “the pool of organic compounds that are released into solution from substrate metabolism and biomass decay”'. Some of the SMPs have been identified as humic acids, polysaccharides, proteins, amino acids, antibiotics, extracellular enzymes and structural components of cells and products of energy metabolism. They adversely affect the kinetic activity, flocculating and settling properties of sludge. This review outlines some important findings with regard to biodegradability and treatability of SMPs and also the effect of process parameters on their production. As SMPs are produced during biological treatment process, their trace amounts normally remain in the effluent that defines the highest COD removal efficiency. Their presence in effluent represents a high potential risk of toxic by-product formation during chlorine disinfection. Studies have indicated that among all wastewater post-treatment processes, the adsorption by granular activated carbon combined with biologically induced degradation is the most effective method for removal of SMPs. However, it may be concludes that the knowledge regarding SMPs is still under progress and more work is required to fully understand their contribution to the treatment process.

Soluble Microbial Products (SMPs Release in Activated Sludge Systems: a Review

Directory of Open Access Journals (Sweden)

Hamed Azami

2012-12-01

Full Text Available This review discusses the characterization, production and implications of soluble microbial products (SMPs in biological wastewater treatment. The precise definition of SMPs is open to talk about, but is currently regarded as “the pool of organic compounds that are released into solution from substrate metabolism and biomass decay”'.Some of the SMPs have been identified as humic acids, olysaccharides, proteins, amino acids, antibiotics,extracellular enzymes and structural components of cells and products of energy metabolism. They adversely affect the kinetic activity, flocculating and settling properties of sludge. This review outlines some important findings with regard to biodegradability and treatability of SMPs and also the effect of process parameters on their production.As SMPs are produced during biological treatment process, their trace amounts normally remain in the effluent that defines the highest COD removal efficiency. Their presence in effluent represents a high potential risk of toxic by-product formation during chlorine disinfection. Studies have indicated that among all wastewaterpost-treatment processes, the adsorption by granular activated carbon combined with biologically induced degradation is the most effective method for removal of SMPs. However, it may be concludes that the knowledge regarding SMPs is still under progress and more work is required to fully understand their contribution to the treatment process.

A systematic literature review of Releasing Time to Care: The Productive Ward.

Science.gov (United States)

Wright, Stella; McSherry, Wilfred

2013-05-01

This systematic review provides an overview of the literature published on Releasing Time to Care: The Productive Ward between 2005 and June 2011. Releasing Time to Care: The Productive Ward programme was developed by the NHS Institute for Innovation and Improvement and launched in England in 2007. The programme comprises thirteen modules that aim to increase time for direct patient care, improve the patient and staff experience and make changes to the ward environment to improve efficiency. A systematic literature review. The terms 'Releasing Time to Care' and 'Productive Ward' were applied to key healthcare databases; CINAHL, Medline, Science Direct, ProQuest, Health Business Elite, British Nursing Index, Embase, Health Management Information Consortium and PsychInfo. All papers were read and subject to a quality assessment. The literature search identified 95 unique sources. A lack of research on The Productive Ward programme meant it was necessary to include non-empirical literature. In total, 18 articles met the inclusion criteria. Seven key themes were identified: the patient and staff experience, direct care time, patient safety, financial impact, embedding and sustainability, executive support and leadership, and common barriers and determinants of success. It also highlighted areas that require further exploration such as long-term sustainability of the programme and consistent data measurement between organisations. The review tentatively reports how The Productive Ward programme has been used to transform nursing practice for the benefit of patients and frontline staff, and how it resulted in cost savings. The literature review identified a potential positive results bias in the current literature whereby favourable outcomes were reported. This paper summarises the types of evidence and current literature on The Productive Ward providing a reference for frontline staff implementing the programme. © 2013 Blackwell Publishing Ltd.

Airborne engineered nanomaterials in the workplace—a review of release and worker exposure during nanomaterial production and handling processes

Energy Technology Data Exchange (ETDEWEB)

Ding, Yaobo [Institute for Work and Health (IST), Universities of Lausanne and Geneva, Route de la Corniche 2, 1066, Epalinges (Switzerland); Kuhlbusch, Thomas A.J. [Institute of Energy and Environmental Technology (IUTA), Air Quality & Sustainable Nanotechnology Unit, Bliersheimer Straße 58-60, 47229 Duisburg (Germany); Centre for Nanointegration (CENIDE), University Duisburg-Essen, Duisburg (Germany); Van Tongeren, Martie; Jiménez, Araceli Sánchez [Centre for Human Exposure Science, Institute of Occupational Medicine (IOM), Research Avenue North, Edinburgh EH14 4AP (United Kingdom); Tuinman, Ilse [TNO, Lange Kleiweg 137, Rijswijk (Netherlands); Chen, Rui [CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety & CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology of China, Beijing 100190 (China); Alvarez, Iñigo Larraza [ACCIONA Infrastructure, Materials Area, Innovation Division, C/Valportillo II 8, 28108, Alcobendas (Spain); Mikolajczyk, Urszula [Nofer Institute of Occupational Medicine, Lodz (Poland); Nickel, Carmen; Meyer, Jessica; Kaminski, Heinz [Institute of Energy and Environmental Technology (IUTA), Air Quality & Sustainable Nanotechnology Unit, Bliersheimer Straße 58-60, 47229 Duisburg (Germany); Wohlleben, Wendel [Dept. Material Physics, BASF SE, Advanced Materials Research, Ludwigshafen (Germany); Stahlmecke, Burkhard [Institute of Energy and Environmental Technology (IUTA), Air Quality & Sustainable Nanotechnology Unit, Bliersheimer Straße 58-60, 47229 Duisburg (Germany); Clavaguera, Simon [NanoSafety Platform, Commissariat à l’Energie Atomique et aux Energies Alternatives (CEA), Univ. Grenoble Alpes, Grenoble, 38054 (France); and others

2017-01-15

Highlights: • Release characteristics can be grouped by the type of occupational activities. • Release levels may be linked to process energy. • A better data reporting practice will facilitate exposure assessment. • The results help prioritize industrial processes for human risk assessment. - Abstract: For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information — such as the amounts of materials handled, protective measures, and measurement strategies — to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended.

Airborne engineered nanomaterials in the workplace—a review of release and worker exposure during nanomaterial production and handling processes

International Nuclear Information System (INIS)

Ding, Yaobo; Kuhlbusch, Thomas A.J.; Van Tongeren, Martie; Jiménez, Araceli Sánchez; Tuinman, Ilse; Chen, Rui; Alvarez, Iñigo Larraza; Mikolajczyk, Urszula; Nickel, Carmen; Meyer, Jessica; Kaminski, Heinz; Wohlleben, Wendel; Stahlmecke, Burkhard; Clavaguera, Simon

2017-01-01

Highlights: • Release characteristics can be grouped by the type of occupational activities. • Release levels may be linked to process energy. • A better data reporting practice will facilitate exposure assessment. • The results help prioritize industrial processes for human risk assessment. - Abstract: For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information — such as the amounts of materials handled, protective measures, and measurement strategies — to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended.

Investigation of Effectiveness of Order Review and Release Models in Make to Order Supply Chain

Directory of Open Access Journals (Sweden)

Kundu Kaustav

2016-01-01

Full Text Available Nowadays customisation becomes more common due to vast requirement from the customers for which industries are trying to use make-to-order (MTO strategy. Due to high variation in the process, workload control models are extensively used for jobshop companies which usually adapt MTO strategy. Some authors tried to implement workload control models, order review and release systems, in non-repetitive manufacturing companies, where there is a dominant flow in production. Those models are better in shop floor but their performances are never been investigated in high variation situations like MTO supply chain. This paper starts with the introduction of particular issues in MTO companies and a general overview of order review and release systems widely used in the industries. Two order review and release systems, the Limited and Balanced models, particularly suitable for flow shop system are applied to MTO supply chain, where the processing times are difficult to estimate due to high variation. Simulation results show that the Balanced model performs much better than the Limited model if the processing times can be estimated preciously.

Fission product release mechanisms and groupings

Energy Technology Data Exchange (ETDEWEB)

Iglesia, F C; Brito, A C; Liu, Y [Ontario Hydro, Toronto, ON (Canada); and others

1996-12-31

During CANDU postulated accidents the reactor fuel is estimated to be exposed to a variety of conditions. These conditions are dynamic and, during the course of an accident, the fuel may experience a wide range of temperatures and conditions from highly oxidizing to mildly reducing environments. The exposure of the reactor fuel to these environments and temperatures may affect its stoichiometry and release performance. In this paper a review of the important fission product release mechanisms is presented, the results of three out-of-pile experimental programs are summarized, and fission product release groups, for both oxidizing and reducing conditions are proposed. (author) 92 refs., 6 tabs.

Regulatory review of releases from HIFAR of radioactive airborne effluent

International Nuclear Information System (INIS)

Westall, D.J.; Macnab, D.I.

1996-01-01

Full text: The Nuclear Safety Bureau (NSB) was set up by legislation in 1992 as an independent Commonwealth corporate body reporting to the Minister for Health and Family Services. Its functions include monitoring and reviewing the safety of nuclear plant owned or operated by the Australian Nuclear Science and Technology Organisation (ANSTO). The NSB sets requirements for authorisation of the operation of the HIFAR research reactor, and may impose restrictions and conditions on its operation. The authorisation for the operation of HIFAR includes a requirement for arrangements for the treatment, safe storage and disposal of solid, liquid and gaseous radioactive wastes from the reactor. The objective is to establish conditions which would ensure that radiation exposure to plant personnel and the public from radioactive wastes are within acceptable limits and that releases are maintained as low as reasonably achievable. The NSB has developed expectations based on international best practice, against which to review HIFAR's arrangements for satisfying the requirement and achieving the objective. Arrangements for the release of airborne radioactive effluent from HIFAR were reviewed by the NSB as part of an overall review of the upgrade of safety documentation for HIFAR. The NSB's expectations for the review were drawn from the International Atomic Energy Agency (IAEA) Basic Safety Standards (Safety Series No 115-I) and the National Health and Medical Research Council (NHMRC) Recommendations for Limiting Exposure to Ionizing Radiation (1995). These expectations included a hierarchy of primary dose limits, stack discharge limits and reference levels for HIFAR aimed at ensuring that radiation doses to the public due to airborne effluent are less than the national dose limits and ANSTO's dose constraints, and are as low as reasonably achievable. An approach favoured by the operator is to work directly to a primary dose limit using an airborne dispersion computer program to

31 CFR 539.406 - Importation into and release from a bonded warehouse or foreign trade zone.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Importation into and release from a bonded warehouse or foreign trade zone. 539.406 Section 539.406 Money and Finance: Treasury Regulations... WEAPONS OF MASS DESTRUCTION TRADE CONTROL REGULATIONS Interpretations § 539.406 Importation into and...

The systems containing clays and clay minerals from modified drug release: a review.

Science.gov (United States)

Rodrigues, Luís Alberto de Sousa; Figueiras, Ana; Veiga, Francisco; de Freitas, Rivelilson Mendes; Nunes, Lívio César Cunha; da Silva Filho, Edson Cavalcanti; da Silva Leite, Cleide Maria

2013-03-01

Clays are materials commonly used in the pharmaceutical industry, either as ingredients or as active ingredients. It was observed that when they are administered concurrently, they may interact with drugs reducing their absorption. Therefore, such interactions can be used to achieve technological and biopharmaceutical advantages, regarding the control of release. This review summarizes bibliographic (articles) and technological (patents) information on the use of systems containing clays and clay minerals in modified drug delivery. In this area, formulations such natural clay, commercial clay, synthetic clay, composites clay-polymers, nanocomposites clay-polymers, films and hidrogels composites clay-polymers are used to slow/extend or vectorize the release of drugs and consequently they increase their bioavailability. Finally, this review summarizes the fields of technology and biopharmaceutical applications, where clays are applied. Copyright © 2012 Elsevier B.V. All rights reserved.

Gray literature: An important resource in systematic reviews.

Science.gov (United States)

Paez, Arsenio

2017-08-01

Systematic reviews aide the analysis and dissemination of evidence, using rigorous and transparent methods to generate empirically attained answers to focused research questions. Identifying all evidence relevant to the research questions is an essential component, and challenge, of systematic reviews. Gray literature, or evidence not published in commercial publications, can make important contributions to a systematic review. Gray literature can include academic papers, including theses and dissertations, research and committee reports, government reports, conference papers, and ongoing research, among others. It may provide data not found within commercially published literature, providing an important forum for disseminating studies with null or negative results that might not otherwise be disseminated. Gray literature may thusly reduce publication bias, increase reviews' comprehensiveness and timeliness, and foster a balanced picture of available evidence. Gray literature's diverse formats and audiences can present a significant challenge in a systematic search for evidence. However, the benefits of including gray literature may far outweigh the cost in time and resource needed to search for it, and it is important for it to be included in a systematic review or review of evidence. A carefully thought out gray literature search strategy may be an invaluable component of a systematic review. This narrative review provides guidance about the benefits of including gray literature in a systematic review, and sources for searching through gray literature. An illustrative example of a search for evidence within gray literature sources is presented to highlight the potential contributions of such a search to a systematic review. Benefits and challenges of gray literature search methods are discussed, and recommendations made. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Grey literature: An important resource in systematic reviews.

Science.gov (United States)

Paez, Arsenio

2017-12-21

Systematic reviews aid the analysis and dissemination of evidence, using rigorous and transparent methods to generate empirically attained answers to focused research questions. Identifying all evidence relevant to the research questions is an essential component, and challenge, of systematic reviews. Grey literature, or evidence not published in commercial publications, can make important contributions to a systematic review. Grey literature can include academic papers, including theses and dissertations, research and committee reports, government reports, conference papers, and ongoing research, among others. It may provide data not found within commercially published literature, providing an important forum for disseminating studies with null or negative results that might not otherwise be disseminated. Grey literature may thusly reduce publication bias, increase reviews' comprehensiveness and timeliness and foster a balanced picture of available evidence. Grey literature's diverse formats and audiences can present a significant challenge in a systematic search for evidence. However, the benefits of including grey literature may far outweigh the cost in time and resource needed to search for it, and it is important for it to be included in a systematic review or review of evidence. A carefully thought out grey literature search strategy may be an invaluable component of a systematic review. This narrative review provides guidance about the benefits of including grey literature in a systematic review, and sources for searching through grey literature. An illustrative example of a search for evidence within grey literature sources is presented to highlight the potential contributions of such a search to a systematic review. Benefits and challenges of grey literature search methods are discussed, and recommendations made. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Release of engineered nanomaterials from polymer nanocomposites: the effect of matrix degradation.

Science.gov (United States)

Duncan, Timothy V

2015-01-14

Polymer nanocomposites-polymer-based materials that incorporate filler elements possessing at least one dimension in the nanometer range-are increasingly being developed for commercial applications ranging from building infrastructure to food packaging to biomedical devices and implants. Despite a wide range of intended applications, it is also important to understand the potential for exposure to these nanofillers, which could be released during routine use or abuse of these materials so that it can be determined whether they pose a risk to human health or the environment. This article is the second of a pair that review what is known about the release of engineered nanomaterials (ENMs) from polymer nanocomposites. Two roughly separate ENM release paradigms are considered in this series: the release of ENMs via passive diffusion, desorption, and dissolution into external liquid media and the release of ENMs assisted by matrix degradation. The present article is focused primarily on the second paradigm and includes a thorough, critical review of the associated body of peer-reviewed literature on ENM release by matrix degradation mechanisms, including photodegradation, thermal decomposition, mechanical wear, and hydrolysis. These release mechanisms may be especially relevant to nanocomposites that are likely to be subjected to weathering, including construction and infrastructural materials, sporting equipment, and materials that might potentially end up in landfills. This review pays particular attention to studies that shed light on specific release mechanisms and synergistic mechanistic relationships. The review concludes with a short section on knowledge gaps and future research needs.

A review of selected aspects of the effect of water vapor on fission gas release from uranium oxycarbide

International Nuclear Information System (INIS)

Myers, B.F.

1994-04-01

A selective review is presented of previous measurements and the analysis of experiments on the effect of water vapor on fission gas release from uranium oxycarbide. Evidence for the time-dependent composition of the uranium oxycarbide fuel; the diffusional release of fission gas; and the initial, rapid and limited release of stored fission gas is discussed. In regard to the initial, rapid release of fission gas, clear restrictions on mechanistic hypotheses can be deduced from the experimental data. However, more fundamental experiments may be required to establish the mechanism of the rapid release

Mechanistic modelling of drug release from polymer-coated and swelling and dissolving polymer matrix systems.

Science.gov (United States)

Kaunisto, Erik; Marucci, Mariagrazia; Borgquist, Per; Axelsson, Anders

2011-10-10

The time required for the design of a new delivery device can be sensibly reduced if the release mechanism is understood and an appropriate mathematical model is used to characterize the system. Once all the model parameters are obtained, in silico experiments can be performed, to provide estimates of the release from devices with different geometries and compositions. In this review coated and matrix systems are considered. For coated formulations, models describing the diffusional drug release, the osmotic pumping drug release, and the lag phase of pellets undergoing cracking in the coating due to the build-up of a hydrostatic pressure are reviewed. For matrix systems, models describing pure polymer dissolution, diffusion in the polymer and drug release from swelling and eroding polymer matrix formulations are reviewed. Importantly, the experiments used to characterize the processes occurring during the release and to validate the models are presented and discussed. Copyright © 2011 Elsevier B.V. All rights reserved.

Release behavior of drugs from various natural gums and polymers.

Science.gov (United States)

Singh, Anupama; Sharma, Pramod Kumar; Malviya, Rishabha

2011-01-01

Polymers are the high molecular weight compounds of natural or synthetic origin, widely used in drug delivery of formulations. These polymers are further classified as hydrophilic or hydrophobic in nature. Depending upon this characteristic, polymers exhibit different release behavior in different media. This property plays an important role in the selection of polymers for controlled, sustained or immediate release formulations. The review highlights the literatures related to the research made on several polymers regarding the release kinetics which made them a novel approach for modifying the action of the particular formulation.

Local control of striatal dopamine release

Directory of Open Access Journals (Sweden)

Roger eCachope

2014-05-01

Full Text Available The mesolimbic and nigrostriatal dopamine (DA systems play a key role in the physiology of reward seeking, motivation and motor control. Importantly, they are also involved in the pathophysiology of Parkinson’s and Huntington’s disease, schizophrenia and addiction. Control of DA release in the striatum is tightly linked to firing of DA neurons in the ventral tegmental area (VTA and the substantia nigra (SN. However, local influences in the striatum affect release by exerting their action directly on axon terminals. For example, endogenous glutamatergic and cholinergic activity is sufficient to trigger striatal DA release independently of cell body firing. Recent developments involving genetic manipulation, pharmacological selectivity or selective stimulation have allowed for better characterization of these phenomena. Such termino-terminal forms of control of DA release transform considerably our understanding of the mesolimbic and nigrostriatal systems, and have strong implications as potential mechanisms to modify impaired control of DA release in the diseased brain. Here, we review these and related mechanisms and their implications in the physiology of ascending DA systems.

The Validity of Attribute-Importance Measurement: A Review

NARCIS (Netherlands)

Ittersum, van K.; Pennings, J.M.E.; Wansink, B.; Trijp, van J.C.M.

2007-01-01

A critical review of the literature demonstrates a lack of validity among the ten most common methods for measuring the importance of attributes in behavioral sciences. The authors argue that one of the key determinants of this lack of validity is the multi-dimensionality of attribute importance.

Systematic reviews identify important methodological flaws in stroke rehabilitation therapy primary studies: review of reviews.

Science.gov (United States)

Santaguida, Pasqualina; Oremus, Mark; Walker, Kathryn; Wishart, Laurie R; Siegel, Karen Lohmann; Raina, Parminder

2012-04-01

A "review of reviews" was undertaken to assess methodological issues in studies evaluating nondrug rehabilitation interventions in stroke patients. MEDLINE, CINAHL, PsycINFO, and the Cochrane Database of Systematic Reviews were searched from January 2000 to January 2008 within the stroke rehabilitation setting. Electronic searches were supplemented by reviews of reference lists and citations identified by experts. Eligible studies were systematic reviews; excluded citations were narrative reviews or reviews of reviews. Review characteristics and criteria for assessing methodological quality of primary studies within them were extracted. The search yielded 949 English-language citations. We included a final set of 38 systematic reviews. Cochrane reviews, which have a standardized methodology, were generally of higher methodological quality than non-Cochrane reviews. Most systematic reviews used standardized quality assessment criteria for primary studies, but not all were comprehensive. Reviews showed that primary studies had problems with randomization, allocation concealment, and blinding. Baseline comparability, adverse events, and co-intervention or contamination were not consistently assessed. Blinding of patients and providers was often not feasible and was not evaluated as a source of bias. The eligible systematic reviews identified important methodological flaws in the evaluated primary studies, suggesting the need for improvement of research methods and reporting. Copyright © 2012 Elsevier Inc. All rights reserved.

Review Article: Hazards of Chaotic Importation, Certification ...

African Journals Online (AJOL)

Review Article: Hazards of Chaotic Importation, Certification, Distribution and Marketing of Medical Laboratory Consumables in Nigeria. BC Nlemadim. Abstract. No abstract. Journal of Medical Laboratory Science Vol.12(2) 2003: 25 - 27. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

Review of radionuclides released from the nuclear fuel cycle and methods of assessing dose to man

International Nuclear Information System (INIS)

Bryant, P.M.

1979-01-01

There are two broad subject areas associated with releases of radionuclides from nuclear fuel cycle installations to the environment in which there are biological implications. One concerns interpretation of doses to man in terms of their radiological significance; the other concerns estimation of environmental transfer of radionuclides and of associated radiation doses to man. The radiation protection philosophy on which past practice regarding effluent releases of radionuclides to the environment was based is illustrated by drawing upon estimates of the associated radiation doses to man given in the 1977 report of the United Nations Scientific Committee on the Effects of Atomic Radiation. The present emphasis in radiation protection philosophy is illustrated by summarizing a review of environmental models relevant to estimation of radiation doses to population groups with reference to effluent releases of 3 H, 14 C, 85 Kr and 129 I; the author carried out the review as a contribution to a current study by an expert group set up by the Nuclear Energy Agency of OECD. Radionuclides of significance in the future may differ from those currently released to the environment because of possible developments in nuclear fuel cycles and options which may be exercised for disposal of high-level radioactive wastes, already in storage or postulated to be produced in the future. (author)

Reproducibility of Interferon Gamma (IFN-γ) Release Assays. A Systematic Review

Science.gov (United States)

Tagmouti, Saloua; Slater, Madeline; Benedetti, Andrea; Kik, Sandra V.; Banaei, Niaz; Cattamanchi, Adithya; Metcalfe, John; Dowdy, David; van Zyl Smit, Richard; Dendukuri, Nandini

2014-01-01

Rationale: Interferon gamma (IFN-γ) release assays for latent tuberculosis infection result in a larger-than-expected number of conversions and reversions in occupational screening programs, and reproducibility of test results is a concern. Objectives: Knowledge of the relative contribution and extent of the individual sources of variability (immunological, preanalytical, or analytical) could help optimize testing protocols. Methods: We performed a systematic review of studies published by October 2013 on all potential sources of variability of commercial IFN-γ release assays (QuantiFERON-TB Gold In-Tube and T-SPOT.TB). The included studies assessed test variability under identical conditions and under different conditions (the latter both overall and stratified by individual sources of variability). Linear mixed effects models were used to estimate within-subject SD. Measurements and Main Results: We identified a total of 26 articles, including 7 studies analyzing variability under the same conditions, 10 studies analyzing variability with repeat testing over time under different conditions, and 19 studies reporting individual sources of variability. Most data were on QuantiFERON (only three studies on T-SPOT.TB). A considerable number of conversions and reversions were seen around the manufacturer-recommended cut-point. The estimated range of variability of IFN-γ response in QuantiFERON under identical conditions was ±0.47 IU/ml (coefficient of variation, 13%) and ±0.26 IU/ml (30%) for individuals with an initial IFN-γ response in the borderline range (0.25–0.80 IU/ml). The estimated range of variability in noncontrolled settings was substantially larger (±1.4 IU/ml; 60%). Blood volume inoculated into QuantiFERON tubes and preanalytic delay were identified as key sources of variability. Conclusions: This systematic review shows substantial variability with repeat IFN-γ release assays testing even under identical conditions, suggesting that reversions

A REVIEW ON CONTROLLED DRUG RELEASE FORMULATION: SPANSULES

OpenAIRE

Rinky Maurya; Dr. Pramod Kumar Sharma; Rishabha Malviya

2014-01-01

Spansules are a dosage form which was considered as one of the Advanced Drug Delivery System. Multidrug preparations can be delivered easily by spansules or granules in capsule technology. This type of delivery system designed to release a drug or a medicament at two or more different rates or in different span of time. A quick/slow release system provides an initial release of drug followed by a constant rate of drug release over a extended period or a defined period of time and in slow/quic...

Release strategies for rehabilitated sea otters

Science.gov (United States)

DeGange, Anthony R.; Ballachey, Brenda E.; Bayha, Keith; Williams, Terrie M.; Davis, Randall W.

1995-01-01

According to the U.S. Fish and Wildlife Services’ (USFWS) Response Plan for sea otters (USFWS, in preparation), in the event of an oil spill, the decision to release sea otters from rehabilitation centers following treatment will be linked to the decision on whether to capture sea otters for treatment. Assuming a scenario similar to the Exxon Valdez oil spill (EVOS), once the decision to capture sea otters is made, the ultimate goal is to return as many sea otters to the wild as possible, even though the rescue may not be expected to produce results significant at the population level. The decision by the USFWS to proceed with capture, rehabilitation, and release will be made on a case-by-case basis (USFWS, in preparation). Many factors will influence the decision. Perhaps the most important factors in deciding when and where to release sea otters are the location and availability of suitable release sites and verification that the otters are free of diseases that might be transmitted to the wild population.Alternative release strategies for sea otters will be contained in the sea otter response portion of the USFWS’s oil spill contingency plans for Alaska and California that are being developed as required by the Oil Pollution Act of 1990. Public review of these plans before they are implemented will help to reduce public concern about the survival of rehabilitated otters, their biological effect on the release area, and the potential introduction or spread of disease into the wild sea otter population.The objective of this chapter is to review alternative strategies for the disposition of rehabilitated sea otters. Our assumption is that returning as many animals to the wild as possible, whether it be for humanitarian or biological reasons, is the ultimate goal of this effort (Figure 10.1).

Dual-controlled release system of drugs for bone regeneration.

Science.gov (United States)

Kim, Yang-Hee; Tabata, Yasuhiko

2015-11-01

Controlled release systems have been noted to allow drugs to enhance their ability for bone regeneration. To this end, various biomaterials have been used as the release carriers of drugs, such as low-molecular-weight drugs, growth factors, and others. The drugs are released from the release carriers in a controlled fashion to maintain their actions for a long time period. Most research has been focused on the controlled release of single drugs to demonstrate the therapeutic feasibility. Controlled release of two combined drugs, so-called dual release systems, are promising and important for tissue regeneration. This is because the tissue regeneration process of bone formation is generally achieved by multiple bioactive molecules, which are produced from cells by other molecules. If two types of bioactive molecules, (i.e., drugs), are supplied in an appropriate fashion, the regeneration process of living bodies will be efficiently promoted. This review focuses on the bone regeneration induced by dual-controlled release of drugs. In this paper, various dual-controlled release systems of drugs aiming at bone regeneration are overviewed explaining the type of drugs and their release materials. Copyright © 2015 Elsevier B.V. All rights reserved.

The Importance of Peer Review: Thoughts on Knudson, Morrow, and Thomas (2014)

Science.gov (United States)

Fischman, Mark G.

2014-01-01

Knudson, Morrow, and Thomas (2014) recently summarized a number of important issues related to the quality of peer review and current peer-review practice in kinesiology. This writer endorses their six recommendations for improving peer review in kinesiology journals. The purpose of this commentary is to further highlight the importance of…

Contact lenses as drug controlled release systems: a narrative review

Directory of Open Access Journals (Sweden)

Helena Prior Filipe

2016-06-01

Full Text Available ABSTRACT Topically applied therapy is the most common way to treat ocular diseases, however given the anatomical and physiological constraints of the eye, frequent dosing is required with possible repercussions in terms of patient compliance. Beyond refractive error correction, contact lenses (CLs have, in the last few decades emerged as a potential ophthalmic drug controlled release system (DCRS. Extensive research is underway to understand how to best modify CLs to increase residence time and bioavailability of drugs within therapeutic levels on the ocular surface.These devices may simultaneously correct ametropia and have a role in managing ophthalmic disorders that can hinder CL wear such as dry eye, glaucoma, ocular allergy and cornea infection and injury. In this narrative review the authors explain how the ocular surface structures determine drug diffusion in the eye and summarize the strategies to enhance drug residence time and bioavailability. They synthesize findings and clinical applications of drug soaked CLs as DCRS combined with delivery diffusion barriers, incorporation of functional monomers, ion related controlled release, molecular imprinting, nanoparticles and layering. The authors draw conclusions about the impact of these novel ophthalmic agents delivery systems in improving drug transport in the target tissue and patient compliance, in reducing systemic absorption and undesired side effects, and discuss future perspectives.

The stress response to surgery: release mechanisms and the modifying effect of pain relief

DEFF Research Database (Denmark)

Kehlet, H

1989-01-01

This short review updates information on the release mechanisms of the systemic response to surgical injury and the modifying effect of pain relief. Initiation of the response is primarily due to afferent nerve impulses combined with release of humoral substances (such as prostaglandins, kinins...... in releasing the classical endocrine catabolic response, while humoral factors are important for the hyperthermic response, changes in coagulation and fibrinolysis immunofunction, and capillary permeability. The modifying effect of pain relief on the surgical stress response is dependent upon the technique...... on the stress response. In summary, pain alleviation itself may not necessarily lead to an important modification of the stress response, and a combined approach with inhibition of the neural and humoral release mechanisms is necessary for a pronounced inhibition or prevention of the response to surgical injury....

Review and perspectives on spallings release models in the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Knowles, M.K; Hansen, F.D.; Thompson, T.W.; Schatz, J.F.; Gross, M.

2000-01-01

The Waste Isolation Pilot Plant was licensed for disposal of transuranic wastes generated by the US Department of Energy. The facility consists of a repository mined in a bedded salt formation, approximately 650 m below the surface. Regulations promulgated by the US Environmental Protection Agency require that performance assessment calculations for the repository include the possibility that an exploratory drilling operation could penetrate the waste disposal areas at some time in the future. Release of contaminated solids could reach the surface during a drilling intrusion. One of the mechanisms for release, known as spallings, can occur if gas pressures in the repository exceed the hydrostatic pressure of a column of drilling mud. Calculation of solids releases for spallings depends critically on the conceptual models for the waste, for the spallings process, and assumptions regarding driller parameters and practices. The paper presents a review of the evolution of these models during regulatory review of the Compliance Certification Application for the repository. A summary and perspectives on the implementation of conservative assumptions in model development are also provided

Review and perspectives on spallings release models in the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Knowles, M.K.; Hansen, F.D.; Thompson, T.W.; Schatz, J.F.; Gross, M.

2000-01-01

The Waste Isolation Pilot Plant was licensed for disposal of transuranic wastes generated by the US Department of Energy. The facility consists of a repository mined in a bedded salt formation, approximately 650 m below the surface. Regulations promulgated by the US Environmental Protection Agency require that performance assessment calculations for the repository include the possibility that an exploratory drilling operation could penetrate the waste disposal areas at some time in the future. Release of contaminated solids could reach the surface during a drilling intrusion. One of the mechanisms for release, known as spallings, can occur if gas pressures in the repository exceed the hydrostatic pressure of a column of drilling mud. Calculation of solids releases for spallings depends critically on the conceptual models for the waste, for the spallings process, and assumptions regarding driller parameters and practices. This paper presents a review of the evolution of these models during the regulatory review of the Compliance Certification Application for the repository. A summary and perspectives on the implementation of conservative assumptions in model development are also provided

Review of specific effects in atmospheric dispersion calculations. The impact of source-term characteristics -and the processes that modify them post release- on dry and wet deposition rates

International Nuclear Information System (INIS)

Cooper, P.J.; Underwood, B.Y.; Brearley, I.

1985-01-01

In the first half of the work the source-term characteristics potentially influencing behaviour were identified and examined. It was concluded that a number of source characteristics, in addition to those conventionally provided for consequence assessment, could significantly influence deposition behaviour. Linking with this, a review was undertaken of past reactor-accident risk assessment and more recent source-term studies to pick out information, if any, on the parameters of interest. The second half of the study resulted in a list of processes capable of transforming the released material vis-a-vis deposition characteristics, including processes occurring in the near field associated with the initial release transient and also those occurring over a longer time span as the plume travels downwind. Scoping calculations were performed for some of the processes in the context of idealized accident scenarios, leading to the conclusions that in some circumstances post-release mechanisms could have an important impact on the deposition behaviour of released material. Statistical theory was used to describe the behaviour of a plume both before and after detachment, and the limitations of the theory were discussed. A review of the lateral wind velocity spectra was undertaken so that simplified spectra could be constructed and used to predict the plume behaviour as a function of travel time, stability category and release duration. It was found that commonly used methods of allowing for release duration overpredicted the dependence, in general, upon release duration. For example the adoption of a stability-independent meandering term would lead to the underprediction of threshold effects such as early death and land/crop interdiction. In addition, theory indicated that the 'Y' curves for different stability categories would converge gradually with increasing travel time

Thermal effects from the release of selenium from a coal combustion during high-temperature processing: a review.

Science.gov (United States)

Hu, Jianjun; Sun, Qiang; He, Huan

2018-04-11

The release of selenium (Se) during coal combustion can have serious impacts on the ecological environment and human health. Therefore, it is very important to study the factors that concern the release of Se from coal combustion. In this paper, the characteristics of the release of Se from coal combustion, pyrolysis, and gasification of different coal species under different conditions are studied. The results show that the amount of released Se increases at higher combustion temperatures. There are obvious increases in the amount of released Se especially in the temperature range of 300 to 800 °C. In addition, more Se is released from the coal gasification than coal combustion process, but more Se is released from coal combustion than pyrolysis. The type of coal, rate of heating, type of mineral ions, and combustion atmosphere have different effects on the released percentage of Se. Therefore, having a good understanding of the factors that surround the release of Se during coal combustion, and then establishing the combustion conditions can reduce the impacts of this toxic element to humans and the environment.

Scenarios and analytical methods for UF6 releases at NRC-licensed fuel cycle facilities

International Nuclear Information System (INIS)

Siman-Tov, M.; Dykstra, J.; Holt, D.D.; Huxtable, W.P.; Just, R.A.; Williams, W.R.

1984-06-01

This report identifies and discusses potential scenarios for the accidental release of UF 6 at NRC-licensed UF 6 production and fuel fabrication facilities based on a literature review, site visits, and DOE enrichment plant experience. Analytical tools needed for evaluating source terms for such releases are discussed, and the applicability of existing methods is reviewed. Accident scenarios are discussed under the broad headings of cylinder failures, UF 6 process system failures, nuclear criticality events, and operator errors and are categorized by location, release source, phase of UF 6 prior to release, release flow characteristics, release causes, initiating events, and UF 6 inventory at risk. At least three types of releases are identified for further examination: (1) a release from a liquid-filled cylinder outdoors, (2) a release from a pigtail or cylinder in a steam chest, (3) an indoor release from either (a) a pigtail or liquid-filled cylinder or (b) other indoor source depending on facility design and operating procedures. Indoor release phenomena may be analyzed to determine input terms for a ventilation model by using a time-dependent homogeneous compartment model or a more complex hydrodynamic model if time-dependent, spatial variations in concentrations, temperature, and pressure are important. Analytical tools for modeling directed jets and explosive releases are discussed as well as some of the complex phenomena to be considered in analyzing UF 6 releases both indoors and outdoors

Controlled drug release for tissue engineering.

Science.gov (United States)

Rambhia, Kunal J; Ma, Peter X

2015-12-10

Tissue engineering is often referred to as a three-pronged discipline, with each prong corresponding to 1) a 3D material matrix (scaffold), 2) drugs that act on molecular signaling, and 3) regenerative living cells. Herein we focus on reviewing advances in controlled release of drugs from tissue engineering platforms. This review addresses advances in hydrogels and porous scaffolds that are synthesized from natural materials and synthetic polymers for the purposes of controlled release in tissue engineering. We pay special attention to efforts to reduce the burst release effect and to provide sustained and long-term release. Finally, novel approaches to controlled release are described, including devices that allow for pulsatile and sequential delivery. In addition to recent advances, limitations of current approaches and areas of further research are discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Clinical and diagnostic importance of proteinuria: A review | Oni ...

African Journals Online (AJOL)

Clinical and diagnostic importance of proteinuria: A review. ... shown that diabetis mellitus, cardiovascular disease and hypertension could provoke secondary ... Proteinuria is also significant in some non-pathological cases such as pregnancy

Guidance for Evaluating the Safety of Experimental Releases of Mosquitoes, Emphasizing Mark-Release-Recapture Techniques.

Science.gov (United States)

Benedict, Mark Q; Charlwood, J Derek; Harrington, Laura C; Lounibos, L Philip; Reisen, William K; Tabachnick, Walter J

2018-01-01

Experimental releases of mosquitoes are performed to understand characteristics of populations related to the biology, ability to transmit pathogens, and ultimately their control. In this article, we discuss considerations related to the safety of experimental releases of living mosquitoes, applying principles of good practice in vector biology that protect human health and comfort. We describe specific factors of experimental releases of mosquitoes that we believe are critical to inform institutional biosafety committees and similar review boards to which proposals to conduct mosquito release experiments have been submitted. In this study, "experimental releases" means those that do not significantly increase vector capacity or nuisance biting relative to the unperturbed natural baseline. This document specifically does not address releases of mosquitoes for ongoing control programs or trials of new control methods for which broader assessments of risk are required. It also does not address releases of transgenic or exotic (non-native) mosquito species, both of which require particular regulatory approval. Experimental releases may include females and males and evaluation must consider their effects based on the number released, their genotype and phenotype, the environment into which they are released, and postrelease collection activities. We consider whether increases of disease transmission and nuisance biting might result from proposed experimental releases against the backdrop of natural population size variation. We recommend that experimental releases be conducted in a manner that can be reasonably argued to have insignificant negative effects. Reviewers of proposals for experimental releases should expect applicants to provide such an argument based on evidence from similar studies and their planned activities. This document provides guidance for creating and evaluating such proposals.

Accelerated in-vitro release testing methods for extended-release parenteral dosage forms.

Science.gov (United States)

Shen, Jie; Burgess, Diane J

2012-07-01

This review highlights current methods and strategies for accelerated in-vitro drug release testing of extended-release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in-situ depot-forming systems and implants. Extended-release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, 'real-time' in-vitro release tests for these dosage forms are often run over a long time period. Accelerated in-vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in-vitro release methods using United States Pharmacopeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended-release parenteral dosage forms, along with the accelerated in-vitro release testing methods currently employed are discussed. Accelerated in-vitro release testing methods with good discriminatory ability are critical for quality control of extended-release parenteral products. Methods that can be used in the development of in-vitro-in-vivo correlation (IVIVC) are desirable; however, for complex parenteral products this may not always be achievable. © 2012 The Authors. JPP © 2012 Royal Pharmaceutical Society.

Accelerated in vitro release testing methods for extended release parenteral dosage forms

Science.gov (United States)

Shen, Jie; Burgess, Diane J.

2012-01-01

Objectives This review highlights current methods and strategies for accelerated in vitro drug release testing of extended release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in situ depot-forming systems, and implants. Key findings Extended release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, “real-time” in vitro release tests for these dosage forms are often run over a long time period. Accelerated in vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in vitro release methods using United States Pharmacopoeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended release parenteral dosage forms, along with the accelerated in vitro release testing methods currently employed are discussed. Conclusions Accelerated in vitro release testing methods with good discriminatory ability are critical for quality control of extended release parenteral products. Methods that can be used in the development of in vitro-in vivo correlation (IVIVC) are desirable, however for complex parenteral products this may not always be achievable. PMID:22686344

Sustained Release Drug Delivery Applications of Polyurethanes

Directory of Open Access Journals (Sweden)

Michael B. Lowinger

2018-05-01

Full Text Available Since their introduction over 50 years ago, polyurethanes have been applied to nearly every industry. This review describes applications of polyurethanes to the development of modified release drug delivery. Although drug delivery research leveraging polyurethanes has been ongoing for decades, there has been renewed and substantial interest in the field in recent years. The chemistry of polyurethanes and the mechanisms of drug release from sustained release dosage forms are briefly reviewed. Studies to assess the impact of intrinsic drug properties on release from polyurethane-based formulations are considered. The impact of hydrophilic water swelling polyurethanes on drug diffusivity and release rate is discussed. The role of pore formers in modulating drug release rate is examined. Finally, the value of assessing mechanical properties of the dosage form and approaches taken in the literature are described.

Tritium release from neutron irradiated beryllium pebbles

Energy Technology Data Exchange (ETDEWEB)

Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

1998-01-01

One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

[Twenty-year History and Future Challenges in Transparency Enhancement of Review Process for Approval: Focus on Public Release of Review Reports regarding New Drugs and Medical Devices].

Science.gov (United States)

Morimoto, Kazushige; Kawasaki, Satoko; Yoshida, Yasunori

2015-01-01

For 20 years, the Ministry of Health, Labour and Welfare (MHLW, formerly Ministry of Health and Welfare (MHW)) has been trying to increase transparency of the review process for approving reports in order to promote the rational use of newly approved drugs and medical devices. The first Summary Basis of Approval (SBA) was published by MHW in 1994. In 1999, evaluation reports were prepared by MHW and the Pharmaceuticals and Medical Devices Evaluation Center to make them available to the public. In 2005, a notice from the Chief Executive of the Pharmaceuticals and Medical Devices Agency (PMDA) made procedures for public release of information on reviewing applications for new drugs. In 2006, 90 review reports of newly approved drugs and eight medical devices were revealed on PMDA websites. The dissemination of information by the United States Food and Drug Administration (FDA) and that of the European Medicines Agency (EMA) were studied and compared with that of the MHLW and PMDA. While common technical documents (CTD) for new drugs and summary technical documents (STED) for new medical devices have been released by PMDA, such documents are not released by the FDA and EMA. The European Public Assessment Report (EAPR) summary for the public is an interesting questionnaire approach that uses the "What," "How" and "Why" format. Finally, future proposals for the next decade are also outlined.

The importance of bacterial utilization of released phytoplankton photosynthate in two humic forest lakes in southern Finland

International Nuclear Information System (INIS)

Jones, R.I.; Salonen, K.

1985-01-01

Bacterial utilization of photosynthetically fixed dissolved organic carbon (PDOC) released from natural phytoplankton assemblages was studied in two small, extremely humic, forest lakes in southern Finland. Bacterial activity (measured us uptake of 14 C-glucose) and phytoplankton photosynthesis (measured as light uptake of 14 CO 2 ) could be most effectively separated using Nuclepore filters of pore 1-2 μm. Released PDOC was 10-67% of total phytoplankton carbon fixation during in situ experiments, and represented about 0.1% of total DOC. Net uptake of PDOC by bacteria was found to be about 20% during 24 hour laboratory incubations, although about 40% of PDOC present at the start of an experiment could be utilized by bacteria during a 24 hour period. PDOC does not provide a quantitatively important substrate supply fo bacterial respiration in humic forest lakes. (author)

Fission Product Release from Spent Nuclear Fuel During Melting

International Nuclear Information System (INIS)

Howell, J.P.; Zino, J.F.

1998-09-01

The Melt-Dilute process consolidates aluminum-clad spent nuclear fuel by melting the fuel assemblies and diluting the 235U content with depleted uranium to lower the enrichment. During the process, radioactive fission products whose boiling points are near the proposed 850 degrees C melting temperature can be released. This paper presents a review of fission product release data from uranium-aluminum alloy fuel developed from Severe Accident studies. In addition, scoping calculations using the ORIGEN-S computer code were made to estimate the radioactive inventories in typical research reactor fuel as a function of burnup, initial enrichment, and reactor operating history and shutdown time.Ten elements were identified from the inventory with boiling points below or near the 850 degrees C reference melting temperature. The isotopes 137Cs and 85Kr were considered most important. This review serves as basic data to the design and development of a furnace off-gas system for containment of the volatile species

The destiny of Ca(2+) released by mitochondria.

Science.gov (United States)

Takeuchi, Ayako; Kim, Bongju; Matsuoka, Satoshi

2015-01-01

Mitochondrial Ca(2+) is known to regulate diverse cellular functions, for example energy production and cell death, by modulating mitochondrial dehydrogenases, inducing production of reactive oxygen species, and opening mitochondrial permeability transition pores. In addition to the action of Ca(2+) within mitochondria, Ca(2+) released from mitochondria is also important in a variety of cellular functions. In the last 5 years, the molecules responsible for mitochondrial Ca(2+) dynamics have been identified: a mitochondrial Ca(2+) uniporter (MCU), a mitochondrial Na(+)-Ca(2+) exchanger (NCLX), and a candidate for a mitochondrial H(+)-Ca(2+) exchanger (Letm1). In this review, we focus on the mitochondrial Ca(2+) release system, and discuss its physiological and pathophysiological significance. Accumulating evidence suggests that the mitochondrial Ca(2+) release system is not only crucial in maintaining mitochondrial Ca(2+) homeostasis but also participates in the Ca(2+) crosstalk between mitochondria and the plasma membrane and between mitochondria and the endoplasmic/sarcoplasmic reticulum.

Imported brucellosis: A case series and literature review.

Science.gov (United States)

Norman, Francesca F; Monge-Maillo, Begoña; Chamorro-Tojeiro, Sandra; Pérez-Molina, Jose-Antonio; López-Vélez, Rogelio

2016-01-01

Brucellosis is one of the main neglected zoonotic diseases. Several factors may contribute to the epidemiology of brucellosis. Imported cases, mainly in travellers but also in recently arrived immigrants, and cases associated with imported products, appear to be infrequently reported. Cases of brucellosis diagnosed at a referral unit for imported diseases in Europe were described and a review of the literature on imported cases and cases associated with contaminated imported products was performed. Most imported cases were associated with traditional risk factors such as travel/consumption of unpasteurized dairy products in endemic countries. Cases associated with importation of food products or infected animals also occurred. Although a lower disease incidence of brucellosis has been reported in developed countries, a higher incidence may still occur in specific populations, as illustrated by cases in Hispanic patients in the USA and in Turkish immigrants in Germany. Imported brucellosis appears to present with similar protean manifestations and both classical and infrequent modes of acquisition are described, leading on occasions to mis-diagnoses and diagnostic delays. Importation of Brucella spp. especially into non-endemic areas, or areas which have achieved recent control of both animal and human brucellosis, may have public health repercussions and timely recognition is essential. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influence of additives and impurities in sweep gas and solid tritium release behaviour from lithium ceramics (review)

International Nuclear Information System (INIS)

Tanaka, Satoru

1991-01-01

Tritium release from solid breeding material is affected by small amounts of additives or impurities in the sweep gas or solid itself. Addition of hydrogen or water vapor to the sweep gas is reported to enhance the surface reaction of tritium release. Doping to solid breeder with elements of different valence from lithium has a possibility to improve tritium diffusion in the solid. Surface reaction and migration behavior in bulk are believed to be also affected by impurities in the sweep gas and in the solid. In order to model tritium release behavior in the blanket of fusion reactor, the mechanism of interaction with these additives or impurities must be quantitatively formulated. However, the mechanism of these remains to be elucidated. In this paper effects of these additives and impurities on tritium migration are reviewed. The mechanism of surface reaction for He+H 2 sweep gas is also discussed. (orig.)

Review of decontamination and clean-up techniques for use in the UK following accidental releases of radioactivity to the environment

International Nuclear Information System (INIS)

Brown, J.; Cooper, J.R.; Jones, J.A.; Flaws, L.; McGeary, R.; Spooner, J.

1996-10-01

This review examines decontamination and clean-up methodologies that may be applied following an accidental release of radionuclides to the atmosphere in the UK. An accidental release of radionuclides to the environment could cause contamination of land and property, and may necessitate movement of the resident population to reduce their exposure. Decontamination procedures may reduce the level of contamination and, in determining whether to implement such procedures in an affected area, it is necessary to weigh the effectiveness of the techniques against the associated economic costs and other disadvantages. The report gives a review of available methods of decontamination and clean-up in terms of the effectiveness of the various methods to remove activity from building or land surfaces and dose saved. It also considers associated disadvantages, costs, clean-up rates for land and buildings, waste disposal implications, and personnel and resource requirements. On the basis of these factors, the techniques are prioritised and overall strategies for decontamination following releases of both fission products and alpha emitters are presented. (author)

Role of fission gas release in reactor licensing

International Nuclear Information System (INIS)

1975-11-01

The release of fission gases from oxide pellets to the fuel rod internal voidage (gap) is reviewed with regard to the required safety analysis in reactor licensing. Significant analyzed effects are described, prominent gas release models are reviewed, and various methods used in the licensing process are summarized. The report thus serves as a guide to a large body of literature including company reports and government documents. A discussion of the state of the art of gas release analysis is presented

Mechanisms of stress-induced cellular HSP72 release: implications for exercise-induced increases in extracellular HSP72.

Science.gov (United States)

Lancaster, Graeme I; Febbraio, Mark A

2005-01-01

The heat shock proteins are a family of highly conserved proteins with critical roles in maintaining cellular homeostasis and in protecting the cell from stressful conditions. While the critical intracellular roles of heat shock proteins are undisputed, evidence suggests that the cell possess the necessary machinery to actively secrete specific heat shock proteins in response to cellular stress. In this review, we firstly discuss the evidence that physical exercise induces the release of heat shock protein 72 from specific tissues in humans. Importantly, it appears as though this release is the result of an active secretory process, as opposed to non-specific processes such as cell lysis. Next we discuss recent in vitro evidence that has identified a mechanistic basis for the observation that cellular stress induces the release of a specific subset of heat shock proteins. Importantly, while the classical protein secretory pathway does not seem to be involved in the stress-induced release of HSP72, we discuss the evidence that lipid-rafts and exosomes are important mediators of the stress-induced release of HSP72.

Assessing the importance of terrain parameters on glide avalanche release

Science.gov (United States)

Peitzsch, E.; Hendrikx, J.; Fagre, D. B.

2013-12-01

Glide snow avalanches are dangerous and difficult to predict. Despite recent research there is still a lack of understanding regarding the controls of glide avalanche release. Glide avalanches often occur in similar terrain or the same locations annually and observations suggest that topography may be critical. Thus, to gain an understanding of the terrain component of these types of avalanches we examined terrain parameters associated with glide avalanche release as well as areas of consistent glide crack formation but no subsequent avalanches. Glide avalanche occurrences visible from the Going-to-the-Sun Road corridor in Glacier National Park, Montana from 2003-2013 were investigated using an avalanche database derived of daily observations each year from April 1 to June 15. This yielded 192 glide avalanches in 53 distinct avalanche paths. Each avalanche occurrence was digitized in a GIS using satellite, oblique, and aerial imagery as reference. Topographical parameters such as area, slope, aspect, elevation and elevation were then derived for the entire dataset utilizing GIS tools and a 10m DEM. Land surface substrate and surface geology were derived from National Park Service Inventory and Monitoring maps and U.S. Geological Survey surface geology maps, respectively. Surface roughness and glide factor were calculated using a four level classification index. . Then, each avalanche occurrence was aggregated to general avalanche release zones and the frequencies were compared. For this study, glide avalanches released in elevations ranging from 1300 to 2700 m with a mean aspect of 98 degrees (east) and a mean slope angle of 38 degrees. The mean profile curvature for all glide avalanches was 0.15 and a plan curvature of -0.01, suggesting a fairly linear surface (i.e. neither convex nor concave). The glide avalanches occurred in mostly bedrock made up of dolomite and limestone slabs and talus deposits with very few occurring in alpine meadows. However, not all glide

Assessing the importance of terrain parameters on glide avalanche release

Science.gov (United States)

Peitzsch, Erich H.; Hendrikx, Jordy; Fagre, Daniel B.

2014-01-01

Glide snow avalanches are dangerous and difficult to predict. Despite recent research there is still a lack of understanding regarding the controls of glide avalanche release. Glide avalanches often occur in similar terrain or the same locations annually and observations suggest that topography may be critical. Thus, to gain an understanding of the terrain component of these types of avalanches we examined terrain parameters associated with glide avalanche release as well as areas of consistent glide crack formation but no subsequent avalanches. Glide avalanche occurrences visible from the Going-to-the-Sun Road corridor in Glacier National Park, Montana from 2003-2013 were investigated using an avalanche database derived of daily observations each year from April 1 to June 15. This yielded 192 glide avalanches in 53 distinct avalanche paths. Each avalanche occurrence was digitized in a GIS using satellite, oblique, and aerial imagery as reference. Topographical parameters such as area, slope, aspect, elevation and elevation were then derived for the entire dataset utilizing GIS tools and a 10m DEM. Land surface substrate and surface geology were derived from National Park Service Inventory and Monitoring maps and U.S. Geological Survey surface geology maps, respectively. Surface roughness and glide factor were calculated using a four level classification index. . Then, each avalanche occurrence was aggregated to general avalanche release zones and the frequencies were compared. For this study, glide avalanches released in elevations ranging from 1300 to 2700 m with a mean aspect of 98 degrees (east) and a mean slope angle of 38 degrees. The mean profile curvature for all glide avalanches was 0.15 and a plan curvature of -0.01, suggesting a fairly linear surface (i.e. neither convex nor concave). The glide avalanches occurred in mostly bedrock made up of dolomite and limestone slabs and talus deposits with very few occurring in alpine meadows. However, not all glide

Towards a mechanistic understanding of transient fission gas release

International Nuclear Information System (INIS)

Matthews, J.R.; Small, G.J.

1989-01-01

Recent experimental results on transient fission gas release from oxide fuels are briefly reviewed. These together with associated microstructural observations are compared with the main models for fission gas behaviour. Single gas atom diffusion, bubble migration, heterogeneous percolation and grain boundary sweeping are examined as possible release mechanisms. The role of gas trapping in bubbles and re-solution by irradiation and thermal processes are included in the comparison. As much of the data, and the main range of interest for light water reactor fuels, is for release during mild transients in fuel with a burn-up below 4%, the role of gas retention on grain boundaries is very important and in some cases dominant. The grain boundaries are found to respond very differently to various gas arrival rates and to local temperature conditions. This can lead to early interlinkage and release in some cases, but retention with accompanying large swelling in others. The role of fission products and the local oxygen content of the fuel are found to be important. The effective fuel stoichiometry is likely to change significantly during transients with substantial effects on the transport processes controlling fission gas behaviour. The results of the evaluation of the models are summarized in mechanism maps for intragranular and grain boundary behaviour. (author). 36 refs, 8 figs

Sustained-release progesterone vaginal suppositories 1--development of sustained-release granule--.

Science.gov (United States)

Nakayama, Ayako; Sunada, Hisakazu; Okamoto, Hirokazu; Furuhashi, Kaoru; Ohno, Yukiko; Ito, Mikio

2009-02-01

Progesterone (P) is an important hormone for the establishment of pregnancy, and its administration is useful for luteal insufficiency. Considering the problems of commercially available oral and injection drugs, hospital-formulated vaginal suppositories are clinically used. However, since the half-life of P suppositories is short, it is difficult to maintain its constant blood concentration. To sustain drug efficacy and prevent side-effects, we are attempting to develop sustained-release suppositories by examining the degree of sustained-release of active ingredients. In this study, we examined the combinations of granulation methods and release systems for the preparation of sustained-release granules of P, and produced 13 types of sustained-release granules. We also examined the diameter, content, and dissolution of each type of granules, and confirmed that the sustained-release of all types of granules was satisfactory. Among the sustained-release granules, we selected granules with a content and a degree of sustained-release suitable for sustained-release suppositories.

Physiological response of some economically important freshwater salmonids to catch-and-release fishing

Science.gov (United States)

Wedemeyer, G.A.; Wydoski, R.S.

2008-01-01

Catch-and-release fishing regulations are widely used by fishery resource managers to maintain both the quantity and quality of sport fish populations. We evaluated blood chemistry disturbances in wild brook trout Salvelinus fontinalis, brown trout Salmo trutta, cutthroat trout Oncorhynchus clarkii, and Arctic grayling Thymallus arcticus that had been hooked and played for 1-5 min in waters of the intermountain western United States. A hatchery stock of brown trout was included for comparison. To assess time needed for recovery, additional test groups were played for 5 min and then released into net-pens, where they were held for up to 72 h. The osmoregulatory and metabolic disturbances associated with catch-and-release fishing under the conditions we tested were minimal and judged to be well within normal physiological tolerance limits. In fish that were held for recovery, the blood chemistry alterations that did occur appeared to be related to stress from confinement in the net-pens. Our results confirm the results of previous studies, showing that prerelease air exposure and handling cause more physiological stress than does either hooking per se or playing time. Fishery managers must be aware of the differences in the perceptions, attitudes, and values of different societal groups, some of which feel that catch-and-release fishing should be banned because it is cruel to the animals. On the basis of brain anatomy, it seems highly unlikely that fish experience pain in the same manner as humans experience it, because fish lack a neocortex, the brain structure that enables the sensation of pain in higher vertebrates. However, independent of the neurobiological argument, our results indicate that under conditions similar to those tested, fish subjected to catch and release are neither suffering nor particularly stressed. Improved education programs about the relatively benign physiological effects of catch-and-release fishing as a fishery management practice would

Metabolic and stress-related roles of prolactin-releasing peptide.

Science.gov (United States)

Onaka, Tatsushi; Takayanagi, Yuki; Leng, Gareth

2010-05-01

In the modern world, improvements in human health can be offset by unhealthy lifestyle factors, including the deleterious consequences of stress and obesity. For energy homeostasis, humoral factors and neural afferents from the gastrointestinal tract, in combination with long-term nutritional signals, communicate information to the brain to regulate energy intake and expenditure. Energy homeostasis and stress interact with each other, and stress affects both food intake and energy expenditure. Prolactin-releasing peptide, synthesized in discrete neuronal populations in the hypothalamus and brainstem, plays an important role in integrating these responses. This review describes how prolactin-releasing peptide neurons receive information concerning both internal metabolic states and environmental conditions, and play a key role in energy homeostasis and stress responses. 2010 Elsevier Ltd. All rights reserved.

The importance of civilian nursing organizations: integrative literature review.

Science.gov (United States)

Santos, James Farley Estevam Dos; Santos, Regina Maria Dos; Costa, Laís de Miranda Crispim; Almeida, Lenira Maria Wanderley Santos de; Macêdo, Amanda Cavalcante de; Santos, Tânia Cristina Franco

2016-06-01

to identify and analyze evidence from studies about the importance of civilian nursing organizations. an integrative literature review, for which searches were conducted in the databases LILACS, PubMed/MEDLINE, SciELO, BDENF, and Scopus. sixteen articles published between the years 2004-2013 were selected, 68.75% of which were sourced from Brazilian journals and 31.25% from American journals. civilian nursing organizations are important and necessary, because they have collaborated decisively in nursing struggles in favor of the working class and society in general, and these contributions influence different axes of professional performance.

Effect of electromagnetic radiation on the release of tritium from a fusion reactor

International Nuclear Information System (INIS)

Causey, R.A.

1982-01-01

Electromagnetic radiation may play an important role in determining the amount of tritium that passes through the first wall of a fusion reactor. Photons enhance the outgassing of hydrogen from metal surfaces and therefore lower the surface concentration. The diffusion coefficient for hydrogen in metals is also increased by photon interactions. The importance of these processes on the tritium release depends on the actual conditions that will exist in the fusion reactor. Because electromagnetic radiation stimulates the release of tritium from traps, it could also affect the tritium inventory in the first wall. The effects of electromagnetic radiation on hydrogen in metals have been reviewed. Because electrons are produced by high energy photons, the effect of electrons on hydrogen has also been included

Idaho National Engineering Laboratory release criteria for decontamination and decommissioning

International Nuclear Information System (INIS)

Dolenc, M.R.; Case, M.J.

1986-01-01

Criteria have been developed for release of Idaho National Engineering Laboratory (INEL) facilities and land areas following decontamination and decommissioning (D and D). Decommissioning release criteria in the form of dose guidelines were proposed by the US Nuclear Regulatory Commission as early as 1980. These criteria were used on an interim basis for INEL D and D projects. However, dose guidelines alone do not adequately cover the criteria necessary to release sites for unrestricted use. In actual practice, other parameters such as pathways analyses, sampling and instrumentation techniques, and implementation procedures are required to develop the basis for unrestricted release of a site. Thus, a rigorous approach for evaluating these other parameters is needed to develop acceptable D and D release criteria. Because of the complex and sensitive nature of the dose and pathways analyses work, a thorough review by experts in those respective fields was desired. Input and support in preparing or reviewing each part of the criteria development task was solicited from several DOE field offices. Experts were identified and contracted to assist in preparing portions of the release criteria, or to serve on a peer-review committee. Thus, the entire release criteria development task was thoroughly reviewed by recognized experts from each DOE field office, to validate technical content of the INEL site-specific document

Review of processes for the release of DOE real and non-real property for reuse and recycle

International Nuclear Information System (INIS)

Ranek, N.L.; Kamboj, S.; Hensley, J.; Chen, S.Y.; Blunt, D.

1997-11-01

This report summarizes the underlying historical and regulatory framework supporting the concept of authorizing release for restricted or unrestricted reuse or recycle of real and non-real U.S. Department of Energy (DOE) properties containing residual radioactive material. Basic radiation protection principles as recommended by the International Commission on Radiological Protection are reviewed, and international initiatives to investigate radiological clearance criteria are reported. Applicable requirements of the U.S. Nuclear Regulatory Commission, the Environmental Protection Agency, DOE, and the State of Washington are discussed. Several processes that have been developed for establishing cleanup and release criteria for real and non-real DOE property containing residual radioactive material are presented. Examples of DOE real property for which radiological cleanup criteria were established to support unrestricted release are provided. Properties discussed include Formerly Utilized Sites Remedial Action Project sites, Uranium Mill Tailings Remedial Action Project sites, the Shippingport decommissioning project, the south-middle and south-east vaults in the 317 area at Argonne National Laboratory, the Heavy Water Components Test Reactor at DOE's Savannah River Site, the Experimental Boiling Water Reactor at Argonne National Laboratory, and the Weldon Spring site. Some examples of non-real property for which DOE sites have established criteria to support unrestricted release are also furnished. 10 figs., 4 tabs

Regulatory Technology Development Plan - Sodium Fast Reactor. Mechanistic Source Term - Metal Fuel Radionuclide Release

International Nuclear Information System (INIS)

Grabaskas, David; Bucknor, Matthew; Jerden, James

2016-01-01

The development of an accurate and defensible mechanistic source term will be vital for the future licensing efforts of metal fuel, pool-type sodium fast reactors. To assist in the creation of a comprehensive mechanistic source term, the current effort sought to estimate the release fraction of radionuclides from metal fuel pins to the primary sodium coolant during fuel pin failures at a variety of temperature conditions. These release estimates were based on the findings of an extensive literature search, which reviewed past experimentation and reactor fuel damage accidents. Data sources for each radionuclide of interest were reviewed to establish release fractions, along with possible release dependencies, and the corresponding uncertainty levels. Although the current knowledge base is substantial, and radionuclide release fractions were established for the elements deemed important for the determination of offsite consequences following a reactor accident, gaps were found pertaining to several radionuclides. First, there is uncertainty regarding the transport behavior of several radionuclides (iodine, barium, strontium, tellurium, and europium) during metal fuel irradiation to high burnup levels. The migration of these radionuclides within the fuel matrix and bond sodium region can greatly affect their release during pin failure incidents. Post-irradiation examination of existing high burnup metal fuel can likely resolve this knowledge gap. Second, data regarding the radionuclide release from molten high burnup metal fuel in sodium is sparse, which makes the assessment of radionuclide release from fuel melting accidents at high fuel burnup levels difficult. This gap could be addressed through fuel melting experimentation with samples from the existing high burnup metal fuel inventory.

Regulatory Technology Development Plan - Sodium Fast Reactor. Mechanistic Source Term - Metal Fuel Radionuclide Release

Energy Technology Data Exchange (ETDEWEB)

Grabaskas, David [Argonne National Lab. (ANL), Argonne, IL (United States); Bucknor, Matthew [Argonne National Lab. (ANL), Argonne, IL (United States); Jerden, James [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-02-01

The development of an accurate and defensible mechanistic source term will be vital for the future licensing efforts of metal fuel, pool-type sodium fast reactors. To assist in the creation of a comprehensive mechanistic source term, the current effort sought to estimate the release fraction of radionuclides from metal fuel pins to the primary sodium coolant during fuel pin failures at a variety of temperature conditions. These release estimates were based on the findings of an extensive literature search, which reviewed past experimentation and reactor fuel damage accidents. Data sources for each radionuclide of interest were reviewed to establish release fractions, along with possible release dependencies, and the corresponding uncertainty levels. Although the current knowledge base is substantial, and radionuclide release fractions were established for the elements deemed important for the determination of offsite consequences following a reactor accident, gaps were found pertaining to several radionuclides. First, there is uncertainty regarding the transport behavior of several radionuclides (iodine, barium, strontium, tellurium, and europium) during metal fuel irradiation to high burnup levels. The migration of these radionuclides within the fuel matrix and bond sodium region can greatly affect their release during pin failure incidents. Post-irradiation examination of existing high burnup metal fuel can likely resolve this knowledge gap. Second, data regarding the radionuclide release from molten high burnup metal fuel in sodium is sparse, which makes the assessment of radionuclide release from fuel melting accidents at high fuel burnup levels difficult. This gap could be addressed through fuel melting experimentation with samples from the existing high burnup metal fuel inventory.

Advances in Targeted Pesticides with Environmentally Responsive Controlled Release by Nanotechnology

Directory of Open Access Journals (Sweden)

Bingna Huang

2018-02-01

Full Text Available Pesticides are the basis for defending against major biological disasters and important for ensuring national food security. Biocompatible, biodegradable, intelligent, and responsive materials are currently an emerging area of interest in the field of efficient, safe, and green pesticide formulation. Using nanotechnology to design and prepare targeted pesticides with environmentally responsive controlled release via compound and chemical modifications has also shown great potential in creating novel formulations. In this review, special attention has been paid to intelligent pesticides with precise controlled release modes that can respond to micro-ecological environment changes such as light-sensitivity, thermo-sensitivity, humidity sensitivity, soil pH, and enzyme activity. Moreover, establishing intelligent and controlled pesticide release technologies using nanomaterials are reported. These technologies could increase pesticide-loading, improve the dispersibility and stability of active ingredients, and promote target ability.

Modulation of Central Synapses by Astrocyte-Released ATP and Postsynaptic P2X Receptors

Science.gov (United States)

Pankratov, Yuriy

2017-01-01

Communication between neuronal and glial cells is important for neural plasticity. P2X receptors are ATP-gated cation channels widely expressed in the brain where they mediate action of extracellular ATP released by neurons and/or glia. Recent data show that postsynaptic P2X receptors underlie slow neuromodulatory actions rather than fast synaptic transmission at brain synapses. Here, we review these findings with a particular focus on the release of ATP by astrocytes and the diversity of postsynaptic P2X-mediated modulation of synaptic strength and plasticity in the CNS. PMID:28845311

Pathways to man for radionuclides released from disposal sites on land

International Nuclear Information System (INIS)

Hill, M.D.

1986-01-01

To predict the potential radiological impact on man of the disposal of radioactive wastes it is necessary to identify all the events and processes that could cause releases of radionuclides into the environment, to estimate their probabilities of occurrence and to calculate their consequences, for both individuals and populations. This paper briefly reviews the types of releases that have to be considered for land disposal sites and describes the mathematical models used to calculate rates of transport of radionuclides through the environment and doses to man. The difficulties involved in predicting environmental conditions in the far future are discussed, in the light of the ways in which the results of consequence calculations will be used. Assessments of land disposal of long-lived and highly radioactive wastes are briefly reviewed, with the aim of identifying the most important radionuclides and exposure pathways, and the areas where the models and their databases require improvement. (author)

Review: Regulatory mechanisms of gonadotropin-inhibitory hormone (GnIH synthesis and release in photoperiodic animals

Directory of Open Access Journals (Sweden)

Kazuyoshi eTsutsui

2013-04-01

Full Text Available Gonadotropin-inhibitory hormone (GnIH is a novel hypothalamic neuropeptide that was discovered in quail as an inhibitory factor for gonadotropin release. GnIH inhibits gonadotropin synthesis and release in birds through actions on gonadotropin-releasing hormone (GnRH neurons and gonadotropes, mediated via the GnIH receptor (GnIH-R, GPR147. Subsequently, GnIH was identified in mammals and other vertebrates. As in birds, mammalian GnIH inhibits gonadotropin secretion, indicating a conserved role for this neuropeptide in the control of the hypothalamic-pituitary-gonadal (HPG axis across species. Identification of the regulatory mechanisms governing GnIH expression and release is important in understanding the physiological role of the GnIH system. A nocturnal hormone, melatonin, appears to act directly on GnIH neurons through its receptor to induce expression and release of GnIH in quail, a photoperiodic bird. Recently, a similar, but opposite, action of melatonin on the inhibition of expression of mammalian GnIH was shown in hamsters and sheep, photoperiodic mammals. These results in photoperiodic animals demonstrate that GnIH expression is photoperiodically modulated via a melatonin-dependent process. Recent findings indicate that GnIH may be a mediator of stress-induced reproductive disruption in birds and mammals, pointing to a broad role for this neuropeptide in assessing physiological state and modifying reproductive effort accordingly. This paper summarizes the advances made in our knowledge regarding the regulation of GnIH synthesis and release in photoperiodic birds and mammals. This paper also discusses the neuroendocrine integration of environmental signals, such as photoperiods and stress, and internal signals, such as GnIH, melatonin and glucocorticoids, to control avian and mammalian reproduction.

Study on large release frequency of nuclear power plants

International Nuclear Information System (INIS)

Chen Yan; Song Wei; Li Chaojun; Fu Zhiwei; Wang Zhe; Zuo Jiaxu; Tong Jiejuan

2014-01-01

There are several definitions of large release frequency of nuclear power plant. This paper reviews the meanings of large release and requirement of large release frequency provided by IAEA, NRC and WENRA, analyses the relationship between the meanings of large release, compares the calculations of several large release frequencies, It is different frequency that the definition of LRF is not same. Last we discuss the difference between large release frequency and large early release frequency and explore the suitable definitions of LRF for nuclear power plants in China. (authors)

Environmental standard review plan for ES Section 7.1.1. Environmental impacts of postulated accidents involving releases of radioactive materials to groundwater

International Nuclear Information System (INIS)

1985-11-01

Environmental Standard Review Plan (ESRP) 7.1.1 provides guidance to the staff for preparation of environmental assessments of ''Radiological Impacts - Releases to Groundwater,'' an input to the staff's environmental statement which addresses the groundwater pathway consequences from postulated reactor core-melt accidents. The ESRP lists the type of information which should be collected, references that may be useful, and provides a procedure for uniform staff review of applicant analyses. The ESRP is applicable to both Construction Permit and Operating License Stage reviews

Release of segregated nuclides from spent fuel

Energy Technology Data Exchange (ETDEWEB)

Johnson, L.H.; Tait, J.C. [Atomic Energy Canada Ltd., Pinawa, MB (Canada). Whiteshell Laboratories

1997-10-01

The potential release of fission and activation products from spent nuclear fuel into groundwater after container failure in the Swedish deep repository is discussed. Data from studies of fission gas release from representative Swedish BWR fuel are used to estimate the average fission gas release for the spent fuel population. Information from a variety of leaching studies on LWR and CANDU fuel are then reviewed as a basis for estimating the fraction of the inventory of key radionuclides that could be released preferentially (the Instant Release Fraction of IRF) upon failure of the fuel cladding. The uncertainties associated with these estimates are discussed. 33 refs, 6 figs, 3 tabs.

Clinical importance of the middle meningeal artery: A review of the literature.

Science.gov (United States)

Yu, Jinlu; Guo, Yunbao; Xu, Baofeng; Xu, Kan

2016-01-01

The middle meningeal artery (MMA) is a very important artery in neurosurgery. Many diseases, including dural arteriovenous fistula (DAVF), pseudoaneurysm, true aneurysm, traumatic arteriovenous fistula (AVF), moyamoya disease (MMD), recurrent chronic subdural hematoma (CSDH), migraine and meningioma, can involve the MMA. In these diseases, the lesions occur in either the MMA itself and treatment is necessary, or the MMA is used as the pathway to treat the lesions; therefore, the MMA is very important to the development and treatment of a variety of neurosurgical diseases. However, no systematic review describing the importance of MMA has been published. In this study, we used the PUBMED database to perform a review of the literature on the MMA to increase our understanding of its role in neurosurgery. After performing this review, we found that the MMA was commonly used to access DAVFs and meningiomas. Pseudoaneurysms and true aneurysms in the MMA can be effectively treated via endovascular or surgical removal. In MMD, the MMA plays a very important role in the development of collateral circulation and indirect revascularization. For recurrent CDSHs, after burr hole irrigation and drainage have failed, MMA embolization may be attempted. The MMA can also contribute to the occurrence and treatment of migraines. Because the ophthalmic artery can ectopically originate from the MMA, caution must be taken to avoid causing damage to the MMA during operations.

Clinical importance of the middle meningeal artery: A review of the literature

Science.gov (United States)

Yu, Jinlu; Guo, Yunbao; Xu, Baofeng; Xu, Kan

2016-01-01

The middle meningeal artery (MMA) is a very important artery in neurosurgery. Many diseases, including dural arteriovenous fistula (DAVF), pseudoaneurysm, true aneurysm, traumatic arteriovenous fistula (AVF), moyamoya disease (MMD), recurrent chronic subdural hematoma (CSDH), migraine and meningioma, can involve the MMA. In these diseases, the lesions occur in either the MMA itself and treatment is necessary, or the MMA is used as the pathway to treat the lesions; therefore, the MMA is very important to the development and treatment of a variety of neurosurgical diseases. However, no systematic review describing the importance of MMA has been published. In this study, we used the PUBMED database to perform a review of the literature on the MMA to increase our understanding of its role in neurosurgery. After performing this review, we found that the MMA was commonly used to access DAVFs and meningiomas. Pseudoaneurysms and true aneurysms in the MMA can be effectively treated via endovascular or surgical removal. In MMD, the MMA plays a very important role in the development of collateral circulation and indirect revascularization. For recurrent CDSHs, after burr hole irrigation and drainage have failed, MMA embolization may be attempted. The MMA can also contribute to the occurrence and treatment of migraines. Because the ophthalmic artery can ectopically originate from the MMA, caution must be taken to avoid causing damage to the MMA during operations. PMID:27766029

Drug delivery systems with modified release for systemic and biophase bioavailability.

Science.gov (United States)

Leucuta, Sorin E

2012-11-01

This review describes the most important new generations of pharmaceutical systems: medicines with extended release, controlled release pharmaceutical systems, pharmaceutical systems for the targeted delivery of drug substances. The latest advances and approaches for delivering small molecular weight drugs and other biologically active agents such as proteins and nucleic acids require novel delivery technologies, the success of a drug being many times dependent on the delivery method. All these dosage forms are qualitatively superior to medicines with immediate release, in that they ensure optimal drug concentrations depending on specific demands of different disease particularities of the body. Drug delivery of these pharmaceutical formulations has the benefit of improving product efficacy and safety, as well as patient convenience and compliance. This paper describes the biopharmaceutical, pharmacokinetic, pharmacologic and technological principles in the design of drug delivery systems with modified release as well as the formulation criteria of prolonged and controlled release drug delivery systems. The paper presents pharmaceutical prolonged and controlled release dosage forms intended for different routes of administration: oral, ocular, transdermal, parenteral, pulmonary, mucoadhesive, but also orally fast dissolving tablets, gastroretentive drug delivery systems, colon-specific drug delivery systems, pulsatile drug delivery systems and carrier or ligand mediated transport for site specific or receptor drug targeting. Specific technologies are given on the dosage forms with modified release as well as examples of marketed products, and current research in these areas.

Modulation of Central Synapses by Astrocyte-Released ATP and Postsynaptic P2X Receptors

Directory of Open Access Journals (Sweden)

Eric Boué-Grabot

2017-01-01

Full Text Available Communication between neuronal and glial cells is important for neural plasticity. P2X receptors are ATP-gated cation channels widely expressed in the brain where they mediate action of extracellular ATP released by neurons and/or glia. Recent data show that postsynaptic P2X receptors underlie slow neuromodulatory actions rather than fast synaptic transmission at brain synapses. Here, we review these findings with a particular focus on the release of ATP by astrocytes and the diversity of postsynaptic P2X-mediated modulation of synaptic strength and plasticity in the CNS.

A review of the role of colloids in the release and transport of radionuclides in the near and far field. Pt. 2

International Nuclear Information System (INIS)

Tipping, E.; Higgo, J.J.W.

1992-01-01

The role of colloids in the release/transport of radionuclides covers a range of scientific disciplines and there is a need for a comprehensive review that pulls together all the relevant research. A literature review has, therefore, been carried out and a bibliography prepared. Entries are in alphabetical (first author) order and abstracts are provided. This is part 2 of a three-part review. Part 1 reviews fundamental theory and DOE and NIREX funded work while Part 3 compares DOE and NIREX-funded work with the other published work and identifies gaps in the DOE and NIREX programmes. (Author)

A thermodynamic/mass-transport model for the release of ruthenium from irradiated fuel

International Nuclear Information System (INIS)

Garisto, F.; Iglesias, F.C.; Hunt, C.E.L.

1990-01-01

Some postulated nuclear reactor accidents lead to fuel failures and hence release of fission products into the primary heat transport system (PHTS). To determine the consequences of such accidents, it is important to understand the behavior of fission products both in the PHTS and in the reactor containment building. Ruthenium metal has a high boiling point and is nonvolatile under reducing conditions. However, under oxidizing conditions ruthenium can form volatile oxides at relatively low temperatures and, hence, could escape from failed fuel and enter the containment building. The ruthenium radioisotope Ru-106 presents a potentially significant health risk if it is released outside the reactor containment building. Consequently, it is important to understand the behavior of ruthenium during a nuclear reactor accident. The authors review the thermodynamic behavior of ruthenium at high temperatures. The qualitative behavior of ruthenium, predicted using thermodynamic calculations, is then compared with experimental results from the Chalk River Nuclear Laboratories (CRNL). Finally, a simple thermodynamic/mass-transport model is proposed to explain the release behavior of ruthenium in a steam atmosphere

The ALICE Software Release Validation cluster

International Nuclear Information System (INIS)

Berzano, D; Krzewicki, M

2015-01-01

One of the most important steps of software lifecycle is Quality Assurance: this process comprehends both automatic tests and manual reviews, and all of them must pass successfully before the software is approved for production. Some tests, such as source code static analysis, are executed on a single dedicated service: in High Energy Physics, a full simulation and reconstruction chain on a distributed computing environment, backed with a sample “golden” dataset, is also necessary for the quality sign off. The ALICE experiment uses dedicated and virtualized computing infrastructures for the Release Validation in order not to taint the production environment (i.e. CVMFS and the Grid) with non-validated software and validation jobs: the ALICE Release Validation cluster is a disposable virtual cluster appliance based on CernVM and the Virtual Analysis Facility, capable of deploying on demand, and with a single command, a dedicated virtual HTCondor cluster with an automatically scalable number of virtual workers on any cloud supporting the standard EC2 interface. Input and output data are externally stored on EOS, and a dedicated CVMFS service is used to provide the software to be validated. We will show how the Release Validation Cluster deployment and disposal are completely transparent for the Release Manager, who simply triggers the validation from the ALICE build system's web interface. CernVM 3, based entirely on CVMFS, permits to boot any snapshot of the operating system in time: we will show how this allows us to certify each ALICE software release for an exact CernVM snapshot, addressing the problem of Long Term Data Preservation by ensuring a consistent environment for software execution and data reprocessing in the future. (paper)

Artificial Neural Networks in Evaluation and Optimization of Modified Release Solid Dosage Forms

Directory of Open Access Journals (Sweden)

Zorica Djurić

2012-10-01

Full Text Available Implementation of the Quality by Design (QbD approach in pharmaceutical development has compelled researchers in the pharmaceutical industry to employ Design of Experiments (DoE as a statistical tool, in product development. Among all DoE techniques, response surface methodology (RSM is the one most frequently used. Progress of computer science has had an impact on pharmaceutical development as well. Simultaneous with the implementation of statistical methods, machine learning tools took an important place in drug formulation. Twenty years ago, the first papers describing application of artificial neural networks in optimization of modified release products appeared. Since then, a lot of work has been done towards implementation of new techniques, especially Artificial Neural Networks (ANN in modeling of production, drug release and drug stability of modified release solid dosage forms. The aim of this paper is to review artificial neural networks in evaluation and optimization of modified release solid dosage forms.

A Review of the Importance of Maternal-fetal Attachment According to the Islamic Recommendations

OpenAIRE

Fatemeh Ghodrati; Marzieh Akbarzadeh

2018-01-01

Background & aim: Maternal-fetal attachment has an important effect on mother's identity as well as maternal and fetal health. Moreover, this concept is considered as a crucial issue for the improvement of children emotional development. Regarding the Islamic recommendations on maternal-fetal attachment and its correlation with maternal affection, this study was conducted to review the importance of maternal-fetal attachment according to the Islamic recommendations. Methods: This review was c...

Stimuli responsive nanomaterials for controlled release applications

KAUST Repository

Li, Song

2012-01-01

The controlled release of therapeutics has been one of the major challenges for scientists and engineers during the past three decades. Coupled with excellent biocompatibility profiles, various nanomaterials have showed great promise for biomedical applications. Stimuli-responsive nanomaterials guarantee the controlled release of cargo to a given location, at a specific time, and with an accurate amount. In this review, we have combined the major stimuli that are currently used to achieve the ultimate goal of controlled and targeted release by "smart" nanomaterials. The most heavily explored strategies include (1) pH, (2) enzymes, (3) redox, (4) magnetic, and (5) light-triggered release.

Factors affecting the efficiency of the sterile insect release method for tsetse

International Nuclear Information System (INIS)

Curtis, C.F.

1980-01-01

Data are reviewed on the levels of sterility, survival and competitiveness of Glossina males after irradiation with various gamma-ray doses delivered in air or nitrogen. A simple population model helps in the choice of the optimum dose. Field studies of mating competitiveness require a measure of the ratio of sterile to fertile males and of sterile to fertile matings, and both ratio estimates will be subject to sampling error. Data on multiple mating of female Glossina are reviewed. There is some degree of precedence for sperm from the first mating but sterile sperm are fully competitive for fertilization and, following the early death of an embryo, the timing of the next ovulation is only advanced to a slight extent. Thus in an isolated population the occurrence or non-occurrence of female polygamy would be of almost no consequence. Where mated females were immigrating into the release area female polygamy would be advantageous. The low recovery potential of tsetse populations is the main reason for thinking them suitable for control by the introduction of sterility. In trying to measure this recovery potential it is important to distinguish it from natural seasonal increase. If natural population fluctuations are studied to detect density dependent effects it is important not to confuse cause with effect. Non-isolation of the 'target' population is almost certainly the most serious obstacle to practical application of the sterile insect release method, and a steady 'rolling forward' of the release area may be a possible solution. (author)

Resting release of acetylcholine at the motor endplate

International Nuclear Information System (INIS)

Molenaar, P.C.; Polak, R.L.

1986-01-01

This paper reviews recent work on resting release of ACh in frog, rat and mouse skeletal muscle. Because of the effect of Ca 2+ on resting release it was of interest to know whether non-quantal release of ACh is increased under conditions of increased Ca 2+ influx, viz. during depolarization of the nerve terminals. It is shown that depolarization of the motor nerve terminals by K + ions led to an increase of both min.e.p.c. frequency and chemically detectable ACh release

On the sequence of core-melt accidents: Fission product release, source terms and Chernobyl release

Energy Technology Data Exchange (ETDEWEB)

Albrecht, H

1986-01-01

There is a sketch of our ideas on the course of a core melt-out accident in a PWR. There is then a survey of the most important results on fission product release, which were obtained by experiments on the SASCHA melt-out plant. The 3rd part considers questions which are important for determining source terms for the environment and the last part contains some considerations on radioactivity release from the Chernobyl reactor.

Radionuclide release calculations for SAR-08

International Nuclear Information System (INIS)

Thomson, Gavin; Miller, Alex; Smith, Graham; Jackson, Duncan

2008-04-01

Following a review by the Swedish regulatory authorities of the post-closure safety assessment of the SFR 1 disposal facility for low and intermediate waste (L/ILW), SAFE, the SKB has prepared an updated assessment called SAR-08. This report describes the radionuclide release calculations that have been undertaken as part of SAR-08. The information, assumptions and data used in the calculations are reported and the results are presented. The calculations address issues raised in the regulatory review, but also take account of new information including revised inventory data. The scenarios considered include the main case of expected behaviour of the system, with variants; low probability releases, and so-called residual scenarios. Apart from these scenario uncertainties, data uncertainties have been examined using a probabilistic approach. Calculations have been made using the AMBER software. This allows all the component features of the assessment model to be included in one place. AMBER has been previously used to reproduce results the corresponding calculations in the SAFE assessment. It is also used in demonstration of the IAEA's near surface disposal assessment methodology ISAM and has been subject to very substantial verification tests and has been used in verifying other assessment codes. Results are presented as a function of time for the release of radionuclides from the near field, and then from the far field into the biosphere. Radiological impacts of the releases are reported elsewhere. Consideration is given to each radionuclide and to each component part of the repository. The releases from the entire repository are also presented. The peak releases rates are, for most scenarios, due to organic C-14. Other radionuclides which contribute to peak release rates include inorganic C-14, Ni-59 and Ni-63. (author)

Radionuclide release calculations for SAR-08

Energy Technology Data Exchange (ETDEWEB)

Thomson, Gavin; Miller, Alex; Smith, Graham; Jackson, Duncan (Enviros Consulting Ltd, Wolverhampton (United Kingdom))

2008-04-15

Following a review by the Swedish regulatory authorities of the post-closure safety assessment of the SFR 1 disposal facility for low and intermediate waste (L/ILW), SAFE, the SKB has prepared an updated assessment called SAR-08. This report describes the radionuclide release calculations that have been undertaken as part of SAR-08. The information, assumptions and data used in the calculations are reported and the results are presented. The calculations address issues raised in the regulatory review, but also take account of new information including revised inventory data. The scenarios considered include the main case of expected behaviour of the system, with variants; low probability releases, and so-called residual scenarios. Apart from these scenario uncertainties, data uncertainties have been examined using a probabilistic approach. Calculations have been made using the AMBER software. This allows all the component features of the assessment model to be included in one place. AMBER has been previously used to reproduce results the corresponding calculations in the SAFE assessment. It is also used in demonstration of the IAEA's near surface disposal assessment methodology ISAM and has been subject to very substantial verification tests and has been used in verifying other assessment codes. Results are presented as a function of time for the release of radionuclides from the near field, and then from the far field into the biosphere. Radiological impacts of the releases are reported elsewhere. Consideration is given to each radionuclide and to each component part of the repository. The releases from the entire repository are also presented. The peak releases rates are, for most scenarios, due to organic C-14. Other radionuclides which contribute to peak release rates include inorganic C-14, Ni-59 and Ni-63. (author)

A review of the role of colloids in the release and transport of radionuclides in the near and far field. Pt. 3

International Nuclear Information System (INIS)

Tipping, E.; Higgo, J.J.W.

1992-01-01

The role of colloids in the release and transport of radionuclides in the near and far field is discussed and DOE and Nirex funded work is compared with relevant studies by other workers. Gaps in the DOE and Nirex programmes are identified and suggestions for further research are made. This is Part 3 of a three-part review. Part 1 reviews fundamental theory and DOE and Nirex funded work and Part 2 is a comprehensive bibliography (with abstracts). (Author)

A review on phytopharmaceutical importance of asiaticoside

Institute of Scientific and Technical Information of China (English)

Kanika Patel; Raghav Mishra; Dinesh Kumar Patel

2016-01-01

ABSTRACT Herbal plant materials have huge potential in the field of medicine, nutraceuticals, perfumery, beverages, fragrances, cosmetics and dyeing industry.Centella asiatica (L.) Urban (family: Apiaceae) (C. asiatica) is a very popular medicinal herb in Sri Lanka, Madagascar, India and other parts of Asia. Gotu kola, Brahmi and Mandukparniin are the synonyms ofC. asiatica which is mainly used for improving memory power. The pharmacological importance ofC. asiatica is mainly because of triterpenes such as asiatic acid, asiaticoside, madecassoside and madecassic acid,etc.C. asiatica is mainly used for the treatment of mental fatigue, anxiety, epidermal wound, eczema, leprosy, asthma, psoriasis, ulcers and vein diseases. Asiaticoside is a pentacyclic triterpenoid saponin having anti-depression, anti-tumor, anti-inflammatory, anti-oxidant properties and further it also possesses wound healing, antiulcer and anti-hepatofibrotic activities. It improved cognitive impairment in diabetic condition because of the decreased oxidative stress. Quantification of asiaticoside inC. asiatica has been done by several methods which were mainly based on high performance liquid chromatography methods using different compositions of mobile phase sand detection systems. In these days scientists are trying to discover novel medicine from natural sources for the development of better drugs. In this review we have collected information of asiaticoside in respect to its medicinal values, pharmacological activities, extraction, isolation, and other analytical aspects. So the present review will be supportive to the scientists who are trying to develop some novel medicines from asiaticoside for the better health prospects.

A review on phytopharmaceutical importance of asiaticoside

Directory of Open Access Journals (Sweden)

Kanika Patel

2016-11-01

Full Text Available Herbal plant materials have huge potential in the field of medicine, nutraceuticals, perfumery, beverages, fragrances, cosmetics and dyeing industry. Centella asiatica (L. Urban (family: Apiaceae (C. asiatica is a very popular medicinal herb in Sri Lanka, Madagascar, India and other parts of Asia. Gotu kola, Brahmi and Mandukparniin are the synonyms of C. asiatica which is mainly used for improving memory power. The pharmacological importance of C. asiatica is mainly because of triterpenes such as asiatic acid, asiaticoside, madecassoside and madecassic acid, etc. C. asiatica is mainly used for the treatment of mental fatigue, anxiety, epidermal wound, eczema, leprosy, asthma, psoriasis, ulcers and vein diseases. Asiaticoside is a pentacyclic triterpenoid saponin having anti-depression, anti-tumor, anti-inflammatory, antioxidant properties and further it also possesses wound healing, antiulcer and anti-hepatofibrotic activities. It improved cognitive impairment in diabetic condition because of the decreased oxidative stress. Quantification of asiaticoside in C. asiatica has been done by several methods which were mainly based on high performance liquid chromatography methods using different compositions of mobile phase sand detection systems. In these days scientists are trying to discover novel medicine from natural sources for the development of better drugs. In this review we have collected information of asiaticoside in respect to its medicinal values, pharmacological activities, extraction, isolation, and other analytical aspects. So the present review will be supportive to the scientists who are trying to develop some novel medicines from asiaticoside for the better health prospects.

Marine fouling release silicone/carbon nanotube nanocomposite coatings: on the importance of the nanotube dispersion state.

Science.gov (United States)

Beigbeder, Alexandre; Mincheva, Rosica; Pettitt, Michala E; Callow, Maureen E; Callow, James A; Claes, Michael; Dubois, Philippe

2010-05-01

The present work reports on the influence of the dispersion quality of multiwall carbon nanotubes (MWCNTs) in a silicone matrix on the marine fouling-release performance of the resulting nanocomposite coatings. A first set of coatings filled with different nanofiller contents was prepared by the dilution of a silicone/MWCNTs masterbatch within a hydrosilylation-curing polydimethylsiloxane resin. The fouling-release properties of the nanocomposite coatings were studied through laboratory assays with the marine alga (seaweed) Ulva, a common fouling species. As reported previously (see Ref. [19]), the addition of a small (0.05%) amount of carbon nanotubes substantially improves the fouling-release properties of the silicone matrix. This paper shows that this improvement is dependent on the amount of filler, with a maximum obtained with 0.1 wt% of multiwall carbon nanotubes (MWCNTs). The method of dispersion of carbon nanotubes in the silicone matrix is also shown to significantly (p = 0.05) influence the fouling-release properties of the coatings. Dispersing 0.1% MWCNTs using the masterbatch approach yielded coatings with circa 40% improved fouling-release properties over those where MWCNTs were dispersed directly in the polymeric matrix. This improvement is directly related to the state of nanofiller dispersion within the cross-linked silicone coating.

[Cortical Release Signs in Patients with Schizophrenia, Depressive Disorders, and Bipolar Affective Disorder].

Science.gov (United States)

de la Espriella, Ricardo Andrés; Hernández, José Fernando; Espejo, Lina María

2013-12-01

Determining the presence of cortical release signs associated with white matter damage, is a clinically easy method to perform. The objective of this study is to determine the presence of cortical release signs in patients with mental illnesses and cerebrovascular disease, as well as its clinical usefulness, given that it indicates cortical damage. A review was made of cortical release signs in patients hospitalized in clinical psychiatry and general hospitals with bipolar affective disorder (40), depression (37), schizophrenia (33), cardiovascular disease (33) and dementia (37). The signs of cortical release do not have the same importance as cortical damage. For example, the glabellar reflex was found in all the groups, that of paratonia, particularly in the group with schizophrenia, and others signs in the group of patients with dementia. It is suggested that these signs imply subcortical white matter damage. The appearance of these signs shows the need for a follow up of patients diagnosed with bipolar affective disorder, depression and schizophrenia. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Release of fission products in transients

International Nuclear Information System (INIS)

Christensen, H.; Lundqwist, R.

1979-07-01

A station for automatic sampling of coolant has been put in operation at the Oskarshamn-1 reactor. The release of 131 J and other fission products in spikes in connection with reactor trips and scheduled shutdowns has been measured. A model developed at General Electric has been used to predict the spike release in Oskarshamn-1 and the predicted values have been compared with experimental values. Literature data of iodine spikes in BWR and PWR have been reviewed. (author)

Factors affecting release of ethanol vapour in active modified atmosphere packaging systems for horticultural products

Directory of Open Access Journals (Sweden)

Weerawate Utto

2014-04-01

Full Text Available The active modified atmosphere packaging (active MAP system , which provides interactive postharvest control , using ethanol vapour controlled release, is one of the current interests in the development of active packaging for horticultural products. A number of published research work have discussed the relationship between the effectiveness of ethanol vapour and its concentration in the package headspace, including its effect on postharvest decay and physiological controls. This is of importance because a controlled release system should release and maintain ethanol vapour at effective concentrations during the desired storage period. A balance among the mass transfer processes of ethanol vapour in the package results in ethanol vapour accumulation in the package headspace. Key factors affecting these processes include ethanol loading, packaging material, packaged product and storage environment (temperature and relative h umidity. This article reviews their influences and discusses future work required to better understand their influences on ethanol vapour release and accumulations in active MAP.

Polymeric materials and formulation technologies for modified-release tablet development.

Science.gov (United States)

Zarate, J; Igartua, M; Hernández, R M; Pedraz, J L

2009-11-01

Over the last years significant advances have been made in the area of drug delivery with the development of modified-release (MR) dosage forms. The present review is divided into two parts, one dealing with technologies for the design of modified-release drug delivery tablets and the other with the use of synthetic and natural polymers that are capable of controlling drug release.

Validation of software releases for CMS

International Nuclear Information System (INIS)

Gutsche, Oliver

2010-01-01

The CMS software stack currently consists of more than 2 Million lines of code developed by over 250 authors with a new version being released every week. CMS has setup a validation process for quality assurance which enables the developers to compare the performance of a release to previous releases and references. The validation process provides the developers with reconstructed datasets of real data and MC samples. The samples span the whole range of detector effects and important physics signatures to benchmark the performance of the software. They are used to investigate interdependency effects of all CMS software components and to find and fix bugs. The release validation process described here is an integral part of CMS software development and contributes significantly to ensure stable production and analysis. It represents a sizable contribution to the overall MC production of CMS. Its success emphasizes the importance of a streamlined release validation process for projects with a large code basis and significant number of developers and can function as a model for future projects.

Fission gas release from fuel at high burnup

International Nuclear Information System (INIS)

Meyer, R.O.; Beyer, C.E.; Voglewede, J.C.

1978-03-01

The release of fission gas from fuel pellets at high burnup is reviewed in the context of the safety analysis performed for reactor license applications. Licensing actions are described that were taken to correct deficient gas release models used in these safety analyses. A correction function, which was developed by the Nuclear Regulatory Commission staff and its consultants, is presented. Related information, which includes some previously unpublished data, is also summarized. The report thus provides guidance for the analysis of high burnup gas release in licensing situations

Ficus deltoidea Jack: A Review on Its Phytochemical and Pharmacological Importance

Directory of Open Access Journals (Sweden)

Hamidun Bunawan

2014-01-01

Full Text Available Ficus deltoidea Jack (Moraceae has had a long history of use in traditional medicine among the Malays to alleviate and heal ailments such as sores, wounds, and rheumatism and as an after-birth tonic and an antidiabetic drug. Modern pharmacological studies demonstrated that this plant has a wide variety of beneficial attributes for human health. Despite its importance, a review of this species has not been published in the scientific literature to date. Here, we review and summarize the historic and current literature concerning the botany, traditional uses, phytochemistry, pharmacological effects, and toxicity of this wonder plant. This summary could be beneficial for future research aiming to exploit the therapeutic potential of this useful, medicinal species.

Role of In Vitro Release Methods in Liposomal Formulation Development: Challenges and Regulatory Perspective.

Science.gov (United States)

Solomon, Deepak; Gupta, Nilesh; Mulla, Nihal S; Shukla, Snehal; Guerrero, Yadir A; Gupta, Vivek

2017-11-01

In the past few years, measurement of drug release from pharmaceutical dosage forms has been a focus of extensive research because the release profile obtained in vitro can give an indication of the drug's performance in vivo. Currently, there are no compendial in vitro release methods designed for liposomes owing to a range of experimental challenges, which has created a major hurdle for both development and regulatory acceptance of liposome-based drug products. In this paper, we review the current techniques that are most often used to assess in vitro drug release from liposomal products; these include the membrane diffusion techniques (dialysis, reverse dialysis, fractional dialysis, and microdialysis), the sample-and-separate approach, the in situ method, the continuous flow, and the modified United States Pharmacopeia methods (USP I and USP IV). We discuss the principles behind each of the methods and the criteria that assist in choosing the most appropriate method for studying drug release from a liposomal formulation. Also, we have included information concerning the current regulatory requirements for liposomal drug products in the United States and in Europe. In light of increasing costs of preclinical and clinical trials, applying a reliable in vitro release method could serve as a proxy to expensive in vivo bioavailability studies. Graphical Abstract Appropriate in-vitro drug release test from liposomal products is important to predict the in-vivo performance.

Controlled Release from Recombinant Polymers

Science.gov (United States)

Price, Robert; Poursaid, Azadeh; Ghandehari, Hamidreza

2014-01-01

Recombinant polymers provide a high degree of molecular definition for correlating structure with function in controlled release. The wide array of amino acids available as building blocks for these materials lend many advantages including biorecognition, biodegradability, potential biocompatibility, and control over mechanical properties among other attributes. Genetic engineering and DNA manipulation techniques enable the optimization of structure for precise control over spatial and temporal release. Unlike the majority of chemical synthetic strategies used, recombinant DNA technology has allowed for the production of monodisperse polymers with specifically defined sequences. Several classes of recombinant polymers have been used for controlled drug delivery. These include, but are not limited to, elastin-like, silk-like, and silk-elastinlike proteins, as well as emerging cationic polymers for gene delivery. In this article, progress and prospects of recombinant polymers used in controlled release will be reviewed. PMID:24956486

Sexual dimorphism of stress response and immune/ inflammatory reaction: the corticotropin releasing hormone perspective

OpenAIRE

Vamvakopoulos, Nicholas V.

1995-01-01

This review higlghts key aspects of corticotropin releasing hormone (CRH) biology of potential relevance to the sexual dimorphism of the stress response and immune/inflammatory reaction, and introduces two important new concepts based on the regulatory potential of the human (h) CRH gene: (1) a proposed mechanism to account for the tissue-specific antithetical responses of hCRH gene expression to glucocorticolds, that may also explain the frequently observed antithetical effects of chronic gl...

Preparation of venlafaxine hydrochloride sustained-release tablets

Directory of Open Access Journals (Sweden)

GUO Lingling

2013-08-01

Full Text Available To prepare venlafxine hydrochloride sustained-release tablets.Hydroxypropylmethyl cellulose(HPMC and methyl cellulose(MC were used as main materials to prepare sustained-release tablets of velafaxine hydrochloride and the influence of important factors on in vitro release curves of venlafaxine hydrochloride sustained-release tablets was investigated.Results:The optimal prescription included 100 mg HPMC,25 mg MC,and 2.5% glidant in one tablet prepared with 30kN.The tablets were prepared with the method of wet granulation by NO.16 mesh sieve.The tablets exhibited good sustained-release property in phosphate buffered solution (pH=6.8.The as-prepared venlafxine hydrochloride sustained-release tablets have good sustained-release property.

Understanding Hypoxic Drive and the Release of Hypoxic Vasoconstriction.

Science.gov (United States)

Inkrott, Jon C

2016-01-01

Understanding the hypoxic drive and release of hypoxic vasoconstriction in the chronic obstructive pulmonary disease population can be somewhat confusing and misunderstood. Furthermore, the hypoxic drive theory is one in which there really is no scientific evidence to support and yet continues to prosper in every aspect of care in regard to the chronic lung patient, from prehospital all the way to intensive care unit and home care therapy. This subject review will hopefully enhance some understanding of what exactly goes on with these patients and the importance of providing oxygen when it is desperately needed. Copyright © 2016 Air Medical Journal Associates. Published by Elsevier Inc. All rights reserved.

Interagency Nuclear Safety Review Panel Power System Subpanel review for the Ulysses mission

International Nuclear Information System (INIS)

McCulloch, W.H.

1991-01-01

As part of the Interagency Nuclear Safety Review Panel's assessment of the nuclear safety of NASA's Ulysses Mission to investigate properties of the sun, the Power System Subpanel has reviewed the safety analyses and risk evaluations done for the General Purpose Heat Source-Radioisotope Thermoelectric Generator which provides on-board electrical power for the spacecraft. This paper summarizes the activities and results of that review. In general, the approach taken in the primary analysis, executed by the General Electric Company under contract to the Department of Energy, and the resulting conclusions were confirmed by the review. However, the Subpanel took some exceptions and modified the calculations accordingly, producing an independent evaluation of potential releases of radioactive fuel in launch and reentry accidents. Some of the more important of these exceptions are described briefly

ATP Release Channels

Directory of Open Access Journals (Sweden)

Akiyuki Taruno

2018-03-01

Full Text Available Adenosine triphosphate (ATP has been well established as an important extracellular ligand of autocrine signaling, intercellular communication, and neurotransmission with numerous physiological and pathophysiological roles. In addition to the classical exocytosis, non-vesicular mechanisms of cellular ATP release have been demonstrated in many cell types. Although large and negatively charged ATP molecules cannot diffuse across the lipid bilayer of the plasma membrane, conductive ATP release from the cytosol into the extracellular space is possible through ATP-permeable channels. Such channels must possess two minimum qualifications for ATP permeation: anion permeability and a large ion-conducting pore. Currently, five groups of channels are acknowledged as ATP-release channels: connexin hemichannels, pannexin 1, calcium homeostasis modulator 1 (CALHM1, volume-regulated anion channels (VRACs, also known as volume-sensitive outwardly rectifying (VSOR anion channels, and maxi-anion channels (MACs. Recently, major breakthroughs have been made in the field by molecular identification of CALHM1 as the action potential-dependent ATP-release channel in taste bud cells, LRRC8s as components of VRACs, and SLCO2A1 as a core subunit of MACs. Here, the function and physiological roles of these five groups of ATP-release channels are summarized, along with a discussion on the future implications of understanding these channels.

Release of radon contaminants from Yucca Mountain: The role of buoyancy driven flow

International Nuclear Information System (INIS)

Sullivan, T.M.; Pescatore, C.

1994-02-01

The potential for the repository heat source to promote buoyancy driven flow and thereby cause release of radon gas out of Yucca Mountain has been examined through a critical review of the theoretical and experimental studies of this process. The review indicates that steady-state buoyancy enhanced release of natural radon and other contaminant gases should not be a major concern at Yucca Mountain. Barometric pumping and wind pumping are identified as two processes that will have a potentially greater effect on surface releases of gases

The cost effectiveness of long-acting/extended-release antipsychotics for the treatment of schizophrenia: a systematic review of economic evaluations.

Science.gov (United States)

Achilla, Evanthia; McCrone, Paul

2013-04-01

Antipsychotic medication is the mainstay of treatment in schizophrenia. Long-acting medication has potential advantages over daily medication in improving compliance and thus reducing hospitalization and relapse rates. The high acquisition and administration costs of such formulations raise the need for pharmacoeconomic evaluation. The aim of this article is to provide a comprehensive review of the available evidence on the cost effectiveness of long-acting/extended-release antipsychotic medication and critically appraise the strength of evidence reported in the studies from a methodological viewpoint. Relevant studies were identified by searching five electronic databases: PsycINFO, MEDLINE, EMBASE, the NHS Economic Evaluation Database and the Health Technology Assessment database (HTA). Search terms included, but were not limited to, 'long-acting injection', 'economic evaluation', 'cost-effectiveness' and 'cost-utility'. No limits were applied for publication dates and language. Full economic evaluations on long-acting/extended-release antipsychotics were eligible for inclusion. Observational studies and clinical trials were also checked for cost-effectiveness information. Conference abstracts and poster presentations on the cost effectiveness of long-acting antipsychotics were excluded. Thirty-two percent of identified studies met the selection criteria. Pertinent abstracts were reviewed independently by two reviewers. Relevant studies underwent data extraction by one reviewer and were checked by a second, with any discrepancies being clarified during consensus meetings. Eligible studies were assessed for methodological quality using the quality checklist for economic studies recommended by the NICE guideline on interventions in the treatment and management of schizophrenia. After applying the selection criteria, the final sample consisted of 28 studies. The majority of studies demonstrated that risperidone long-acting injection, relative to oral or other long

Review of tellurium release rates from LWR fuel elements under accident conditions

International Nuclear Information System (INIS)

Lorenz, R.A.; Beahm, E.C.; Wichner, R.P.

1983-01-01

Although fission product tellurium presents a potentially significant radiohazard, its release and transport in source-term experiments is frequently overlooked because it does not possess a readily measurable, gamma emission; moreover, a recent study emphasized noble gas, iodine and cesium release from LWR fuel elements because of the large data base that exists for these materials. Some new tests show that in some cases tellurium may be held up in core material to a greater degree than previously assumed - an observation that prompts a careful reappraisal of the existing tellurium-release data and its chemical foundation

Chronotherapy with low-dose modified-release prednisone for the management of rheumatoid arthritis: a review

Directory of Open Access Journals (Sweden)

Beltrametti SP

2016-11-01

review is a comprehensive, updated summary of the current evidence on the use of GCs in RA, with focus on the efficacy and safety of low-dose prednisone and modified-release prednisone, the latter representing a rational, cost-effective, and tailored approach to maximize the benefit/risk ratio in RA patients. Keywords: glucocorticoids, rheumatoid arthritis, modified-release prednisone, safety, efficacy, adrenal function

Heat release rate of wood-plastic composites

Science.gov (United States)

N. M. Stark; R. H. White; C. M. Clemons

1997-01-01

Wood-plastic composites are becoming more important as a material that fulfills recycling needs. In this study, fire performance tests were conducted on several compositions of wood and plastic materials using the Ohio State University rate of heat release apparatus. Test results included five-minute average heat release rate in kW/m2 (HRR avg) and maximum heat release...

Efficacy of long-acting release octreotide for preventing chemotherapy-induced diarrhoea: protocol for a systematic review.

Science.gov (United States)

Deng, Chao; Deng, Bo; Jia, Liqun; Tan, Huangying

2017-06-21

Diarrhoea is a common adverse effect induced by chemotherapy that can reduce the dose of chemotherapeutic drugs or interrupt the chemotherapy schedule. The current treatment strategies have various limitations. It has been shown that long-acting release octreotide (octreotide LAR) can decrease the occurrence and severity of diarrhoea, yet the efficacy of octreotide LAR in preventing chemotherapy-induced diarrhoea (CID) remains to be assessed. The main objective of this paper was to draw up a protocol for systematic review to evaluate the protective effects of octreotide LAR on CID. We searched Medline, EMBASE, the Cochrane Library, Chinese National Knowledge Infrastructure, Wanfang Data and the VIP Database without language restrictions from inception until 1 September 2016. The references of relevant studies were also manually searched. Two investigators independently accessed the selected studies, extracted data and assessed the reliability of the studies. Any discrepancies were resolved by a third investigator. The effect size of the selected studies was assessed by different measures based on the type of data. The selected studies were descriptively analysed. We then chose a fixed-effect model or a random-effect model based on statistical homogeneity, and pooled data from the studies for meta-analysis, if possible. The primary outcome was the incidence of diarrhoea. The secondary outcomes were the duration of diarrhoea, incidence of diarrhoea-associated symptoms, physical function and quality of life. All statistical analyses were performed by Review Manager V.5.3. This systematic review did not require ethics approval, because it included aggregated published data, and not individual patient data. The review was published in a peer-reviewed journal. This systematic review protocol was registered with PROSPERO (registration number: CRD 42016048573). © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights

Airway pressure release ventilation and biphasic positive airway pressure: a systematic review of definitional criteria.

Science.gov (United States)

Rose, Louise; Hawkins, Martyn

2008-10-01

The objective of this study was to identify the definitional criteria for the pressure-limited and time-cycled modes: airway pressure release ventilation (APRV) and biphasic positive airway pressure (BIPAP) available in the published literature. Systematic review. Medline, PubMed, Cochrane, and CINAHL databases (1982-2006) were searched using the following terms: APRV, BIPAP, Bilevel and lung protective strategy, individually and in combination. Two independent reviewers determined the paper eligibility and abstracted data from 50 studies and 18 discussion articles. Of the 50 studies, 39 (78%) described APRV, and 11 (22%) described BIPAP. Various study designs, populations, or outcome measures were investigated. Compared to BIPAP, APRV was described more frequently as extreme inverse inspiratory:expiratory ratio [18/39 (46%) vs. 0/11 (0%), P = 0.004] and used rarely as a noninverse ratio [2/39 (5%) vs. 3/11 (27%), P = 0.06]. One (9%) BIPAP and eight (21%) APRV studies used mild inverse ratio (>1:1 to branding may further add to confusion. Generic naming of modes and consistent definitional parameters may improve consistency of patient response for a given mode and assist with clinical implementation.

A Review of Empathy, Its Importance, and Its Teaching in Surgical Training.

Science.gov (United States)

Han, Jing L; Pappas, Theodore N

There has been much discussion in the medical literature about the importance of empathy and physician communication style in medical practice. Empathy has been shown to have a very real positive effect on patient outcomes. Most of the existing literature speaks to its role in medical education, with relatively little empiric study about empathy in the surgical setting. Review of empathy and its importance as it pertains to the surgeon-patient relationship and improving patient outcomes, and the need for increased education in empathy during surgical training. The published, peer-reviewed literature on patient-physician and patient-surgeon communication, medical student and resident education in empathy, and empathy research was reviewed. PubMed was queried for MESH terms including "empathy," "training," "education," "surgery," "resident," and "communication." There is evidence of a decline in empathy that begins during the clinical years of medical school, which continues throughout residency training. Surgeons are particularly susceptible to this decline as by-product of the nature of their work, and the current lack of formalised training in empathic patient communication poses a unique problem to surgical residents. The literature suggests that empathy training is warranted and should be incorporated into surgical residencies through didactics, role-playing and simulations, and apprenticeship to empathic attending role models. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Polymeric nanoparticles containing diazepam: preparation, optimization, characterization, in-vitro drug release and release kinetic study

Science.gov (United States)

Bohrey, Sarvesh; Chourasiya, Vibha; Pandey, Archna

2016-03-01

Nanoparticles formulated from biodegradable polymers like poly(lactic-co-glycolic acid) (PLGA) are being extensively investigated as drug delivery systems due to their two important properties such as biocompatibility and controlled drug release characteristics. The aim of this work to formulated diazepam loaded PLGA nanoparticles by using emulsion solvent evaporation technique. Polyvinyl alcohol (PVA) is used as stabilizing agent. Diazepam is a benzodiazepine derivative drug, and widely used as an anticonvulsant in the treatment of various types of epilepsy, insomnia and anxiety. This work investigates the effects of some preparation variables on the size and shape of nanoparticles prepared by emulsion solvent evaporation method. These nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM). Zeta potential study was also performed to understand the surface charge of nanoparticles. The drug release from drug loaded nanoparticles was studied by dialysis bag method and the in vitro drug release data was also studied by various kinetic models. The results show that sonication time, polymer content, surfactant concentration, ratio of organic to aqueous phase volume, and the amount of drug have an important effect on the size of nanoparticles. Hopefully we produced spherical shape Diazepam loaded PLGA nanoparticles with a size range under 250 nm with zeta potential -23.3 mV. The in vitro drug release analysis shows sustained release of drug from nanoparticles and follow Korsmeyer-Peppas model.

78 FR 37244 - Submission for Review: We Need Important Information About Your Eligibility for Social Security...

Science.gov (United States)

2013-06-20

... Important Information About Your Eligibility for Social Security Disability Benefits, RI 98-7. As required... Personnel Management. Title: We Need Important Information About Your Eligibility for Social Security... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: We Need Important Information About Your...

Distribution-based estimates of minimum clinically important difference in cognition, arm function and lower body function after slow release-fampridine treatment of patients with multiple sclerosis

DEFF Research Database (Denmark)

Jensen, H B; Mamoei, Sepehr; Ravnborg, M.

2016-01-01

OBJECTIVE: To provide distribution-based estimates of the minimal clinical important difference (MCID) after slow release fampridine treatment on cognition and functional capacity in people with MS (PwMS). METHOD: MCID values were determined after SR-Fampridine treatment in 105 PwMS. Testing...

Probabilistic siting analysis of nuclear power plants emphasizing atmospheric dispersion of radioactive releases and radiation-induced health effects

International Nuclear Information System (INIS)

Savolainen, Ilkka

1980-01-01

A presentation is made of probabilistic evaluation schemes for nuclear power plant siting. Effects on health attributable to ionizing radiation are reviewed, for the purpose of assessment of the numbers of the most important health effect cases in light-water reactor accidents. The atmospheric dispersion of radioactive releases from nuclear power plants is discussed, and there is presented an environmental consequence assessment model in which the radioactive releases and atmospheric dispersion of the releases are treated by the application of probabilistic methods. In the model, the environmental effects arising from exposure to radiation are expressed as cumulative probability distributions and expectation values. The probabilistic environmental consequence assessment model has been applied to nuclear power plant site evaluation, including risk-benefit and cost-benefit analyses, and the comparison of various alternative sites. (author)

Model-based computer-aided design for controlled release of pesticides

DEFF Research Database (Denmark)

Muro Sunè, Nuria; Gani, Rafiqul; Bell, G.

2005-01-01

In the field of controlled release technology for pesticides or active ingredients (AI), models that can predict its delivery during application are important for purposes of design and marketing of the pesticide product. Appropriate models for the controlled release of pesticides, if available, ...... extended models have been developed and implemented into a computer-aided system. The total model consisting of the property models embedded into the release models are then employed to study the release of different combinations of AIs and polymer-based microcapsules.......In the field of controlled release technology for pesticides or active ingredients (AI), models that can predict its delivery during application are important for purposes of design and marketing of the pesticide product. Appropriate models for the controlled release of pesticides, if available...

Impact of lysosome status on extracellular vesicle content and release.

Science.gov (United States)

Eitan, Erez; Suire, Caitlin; Zhang, Shi; Mattson, Mark P

2016-12-01

Extracellular vesicles (EVs) are nanoscale size bubble-like membranous structures released from cells. EVs contain RNA, lipids and proteins and are thought to serve various roles including intercellular communication and removal of misfolded proteins. The secretion of misfolded and aggregated proteins in EVs may be a cargo disposal alternative to the autophagy-lysosomal and ubiquitin-proteasome pathways. In this review we will discuss the importance of lysosome functionality for the regulation of EV secretion and content. Exosomes are a subtype of EVs that are released by the fusion of multivesicular bodies (MVB) with the plasma membrane. MVBs can also fuse with lysosomes, and the trafficking pathway of MVBs can therefore determine whether or not exosomes are released from cells. Here we summarize data from studies of the effects of lysosome inhibition on the secretion of EVs and on the possibility that cells compensate for lysosome malfunction by disposal of potentially toxic cargos in EVs. A better understanding of the molecular mechanisms that regulate trafficking of MVBs to lysosomes and the plasma membrane may advance an understanding of diseases in which pathogenic proteins, lipids or infectious agents accumulate within or outside of cells. Copyright © 2016. Published by Elsevier B.V.

Assessing the influence of media composition and ionic strength on drug release from commercial immediate-release and enteric-coated aspirin tablets.

Science.gov (United States)

Karkossa, Frank; Klein, Sandra

2017-10-01

The objective of this test series was to elucidate the importance of selecting the right media composition for a biopredictive in-vitro dissolution screening of enteric-coated dosage forms. Drug release from immediate-release (IR) and enteric-coated (EC) aspirin formulations was assessed in phosphate-based and bicarbonate-based media with different pH, electrolyte composition and ionic strength. Drug release from aspirin IR tablets was unaffected by media composition. In contrast, drug release from EC aspirin formulations was affected by buffer species and ionic strength. In all media, drug release increased with increasing ionic strength, but in bicarbonate-based buffers was delayed when compared with that in phosphate-based buffers. Interestingly, the cation species in the dissolution medium had also a clear impact on drug release. Drug release profiles obtained in Blank CarbSIF, a new medium simulating pH and average ionic composition of small intestinal fluid, were different from those obtained in all other buffer compositions studied. Results from this study in which the impact of various media parameters on drug release of EC aspirin formulations was systematically screened clearly show that when developing predictive dissolution tests, it is important to simulate the ionic composition of intraluminal fluids as closely as possible. © 2017 Royal Pharmaceutical Society.

Overview study of LNG release prevention and control systems

Energy Technology Data Exchange (ETDEWEB)

Pelto, P.J.; Baker, E.G.; Holter, G.M.; Powers, T.B.

1982-03-01

The liquefied natural gas (LNG) industry employs a variety of release prevention and control techniques to reduce the likelihood and the consequences of accidental LNG releases. A study of the effectiveness of these release prevention and control systems is being performed. Reference descriptions for the basic types of LNG facilities were developed. Then an overview study was performed to identify areas that merit subsequent and more detailed analyses. The specific objectives were to characterize the LNG facilities of interest and their release prevention and control systems, identify possible weak links and research needs, and provide an analytical framework for subsequent detailed analyses. The LNG facilities analyzed include a reference export terminal, marine vessel, import terminal, peakshaving facility, truck tanker, and satellite facility. A reference description for these facilities, a preliminary hazards analysis (PHA), and a list of representative release scenarios are included. The reference facility descriptions outline basic process flows, plant layouts, and safety features. The PHA identifies the important release prevention operations. Representative release scenarios provide a format for discussing potential initiating events, effects of the release prevention and control systems, information needs, and potential design changes. These scenarios range from relatively frequent but low consequence releases to unlikely but large releases and are the principal basis for the next stage of analysis.

Releases of natural enemies in Hawaii since 1980 for classical biological control of weeds

Science.gov (United States)

P. Conant; J. N. Garcia; M. T. Johnson; W. T. Nagamine; C. K. Hirayama; G. P. Markin; R. L. Hill

2013-01-01

A comprehensive review of biological control of weeds in Hawaii was last published in 1992, covering 74 natural enemy species released from 1902 through 1980. The present review summarizes releases of 21 natural enemies targeting seven invasive weeds from 1981 to 2010. These projects were carried out by Hawaii Department of Agriculture (HDOA), USDA Forest Service (USFS...

Formulation and Pharmacokinetic Evaluation of Controlled-Release ...

African Journals Online (AJOL)

The effect of several formulation variables on in ... The in vivo pharmacokinetics of the optimized formulation was compared ... Results: The core tablets exhibited extended release consisting of drug release from the embedded ... important factor in medical treatment with respect ... The solvents for high-performance liquid.

Tapentadol extended-release for treatment of chronic pain: a review

Directory of Open Access Journals (Sweden)

Vadivelu N

2011-08-01

Full Text Available Nalini Vadivelu1, Alexander Timchenko1, Yili Huang2, Raymond Sinatra11Department of Anesthesiology, Yale University School of Medicine, New Haven, CT; 2Internal Medicine, North Shore-LIJ Plainview Hospital, Plainview, NY, USAAbstract: Tapentadol is a centrally acting analgesic with a dual mechanism of action of mu receptor agonism and norepinephrine reuptake inhibition. Tapentadol immediate-release is approved by the US Food and Drug Administration for the management of moderate-to-severe acute pain. It was developed to decrease the intolerability issue associated with opioids. Tapentadol extended-release has a 12-hour duration of effect, and has recently been evaluated for pain in patients with chronic osteoarthritis, low back pain, and pain associated with diabetic peripheral neuropathy. Tapentadol extended-release was found to provide safe and highly effective analgesia for the treatment of chronic pain conditions, including moderate-to-severe chronic osteoarthritis pain and low back pain. Initial trials demonstrating efficacy in neuropathic pain suggest that tapentadol has comparable analgesic effectiveness and better gastrointestinal tolerability than opioid comparators, and demonstrates effectiveness in settings of inflammatory, somatic, and neuropathic pain. Gastrointestinal intolerance and central nervous system effects were the major adverse events noted. Tapentadol will need to be rigorously tested in chronic neuropathic pain, cancer-related pain, and cancer-related neuropathic pain.Keywords: osteoarthritis, neuropathic pain, analgesic, opioids, norepinephrine

The Importance of Cholesterol in Psychopathology: A Review of Recent Contributions.

Science.gov (United States)

Pereira, Henrique

2017-01-01

The aim of this study was to describe systematically recent studies that show the importance of cholesterol in psychopathology. This study was a review. The following databases were searched for relevant published articles on human studies: MEDLINE, Web of Science, EBSCOhost Academic Search Complete, and Psychology and Behavioral Sciences Collection (papers from January 2012 to March 2016). Eighteen recent papers were selected, and thematic dimensions showing correlations between cholesterol and behavioral and psychopathological variables were depression, suicide, personality, and aggression. This paper demonstrates that recent research corroborates the idea that cholesterol plays an important role in governing behavior and psychopathology in humans. Deepening the studies in this field could be a promising avenue for future research, with implications for treating people with behavior or mental health problems.

Oral controlled release drug delivery system and Characterization of oral tablets; A review

Directory of Open Access Journals (Sweden)

Muhammad Zaman

2016-01-01

Full Text Available Oral route of drug administration is considered as the safest and easiest route of drug administration. Control release drug delivery system is the emerging trend in the pharmaceuticals and the oral route is most suitable for such kind of drug delivery system. Oral route is more convenient for It all age group including both pediatric and geriatrics. There are various systems which are adopted to deliver drug in a controlled manner to different target sites through oral route. It includes diffusion controlled drug delivery systems; dissolution controlled drug delivery systems, osmotically controlled drug delivery systems, ion-exchange controlled drug delivery systems, hydrodynamically balanced systems, multi-Particulate drug delivery systems and microencapsulated drug delivery system. The systems are formulated using different natural, semi-synthetic and synthetic polymers. The purpose of the review is to provide information about the orally controlled drug delivery system, polymers which are used to formulate these systems and characterizations of one of the most convenient dosage form which is the tablets. 

Stimuli responsive nanomaterials for controlled release applications

KAUST Repository

Li, Song; Li, Wengang; Khashab, Niveen M.

2012-01-01

applications. Stimuli-responsive nanomaterials guarantee the controlled release of cargo to a given location, at a specific time, and with an accurate amount. In this review, we have combined the major stimuli that are currently used to achieve the ultimate

Perceived importance and responsibility for market-driven pig welfare: Literature review.

Science.gov (United States)

Thorslund, Cecilie A H; Aaslyng, Margit Dall; Lassen, Jesper

2017-03-01

This review explores barriers and opportunities for market-driven pig welfare in Europe. It finds, first, that consumers generally rank animal welfare as important, but they also rank it low relative to other societal problems. Second, consumers have a wide range of concerns about pig welfare, but they focus especially on naturalness. Third, pig welfare is seen as an important indicator of meat quality. Fourth, consumers tend to think that responsibility for pig welfare lies with several actors: farmers, governments and themselves. The paper concludes that there is an opportunity for the market-driven strategy to sell a narrative about naturalness supplemented with other attractive qualities (such as eating quality). It also emphasizes that pig welfare needs to be on the political/societal agenda permanently if it is to be viewed as an important issue by consumers and if consumers are to assume some sort of responsibility for it. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impacts of Imported Liquefied Natural Gas on Residential Appliance Components: Literature Review

Energy Technology Data Exchange (ETDEWEB)

Lekov, Alex; Sturges, Andy; Wong-Parodi, Gabrielle

2009-12-09

An increasing share of natural gas supplies distributed to residential appliances in the U.S. may come from liquefied natural gas (LNG) imports. The imported gas will be of a higher Wobbe number than domestic gas, and there is concern that it could produce more pollutant emissions at the point of use. This report will review recently undertaken studies, some of which have observed substantial effects on various appliances when operated on different mixtures of imported LNG. While we will summarize findings of major studies, we will not try to characterize broad effects of LNG, but describe how different components of the appliance itself will be affected by imported LNG. This paper considers how the operation of each major component of the gas appliances may be impacted by a switch to LNG, and how this local impact may affect overall safety, performance and pollutant emissions.

Algae of economic importance that accumulate cadmium and lead: a review

Directory of Open Access Journals (Sweden)

Priscila O. Souza

2012-08-01

Full Text Available Currently, algae and algae products are extensively applied in the pharmaceutical, cosmetic and food industries. Algae are the main organisms that take up and store heavy metals. Therefore, the use of compounds derived from algae by the pharmaceutical industry should be closely monitored for possible contamination. The pollution generated by heavy metals released by industrial and domestic sources causes serious changes in the aquatic ecosystem, resulting in a loss of biological diversity and a magnification and bioaccumulation of toxic agents in the food chain. Since algae are at the bottom of the aquatic food chain, they are the most important vector for transfer of pollution to upper levels of the trophic chain in aquatic environments. Moreover, microalgae are also used for the bioremediation of wastewater, a process that does not produce secondary pollution, that enables efficient recycling of nutrients and that generates biomass useful for the production of bioactive compounds and biofuel.

Algae of economic importance that accumulate cadmium and lead: a review

Directory of Open Access Journals (Sweden)

Priscila O. Souza

2012-06-01

Full Text Available Currently, algae and algae products are extensively applied in the pharmaceutical, cosmetic and food industries. Algae are the main organisms that take up and store heavy metals. Therefore, the use of compounds derived from algae by the pharmaceutical industry should be closely monitored for possible contamination. The pollution generated by heavy metals released by industrial and domestic sources causes serious changes in the aquatic ecosystem, resulting in a loss of biological diversity and a magnification and bioaccumulation of toxic agents in the food chain. Since algae are at the bottom of the aquatic food chain, they are the most important vector for transfer of pollution to upper levels of the trophic chain in aquatic environments. Moreover, microalgae are also used for the bioremediation of wastewater, a process that does not produce secondary pollution, that enables efficient recycling of nutrients and that generates biomass useful for the production of bioactive compounds and biofuel.

Imported melioidosis in Japan: a review of cases.

Science.gov (United States)

Hadano, Yoshiro

2018-01-01

Fourteen cases of reported melioidosis in Japan were reviewed. The mean age was 52.4 years (33-69 years), and all patients were male. All of the presumed exposures originated in Southeast Asia. The most common underlying disease was diabetes mellitus, including those patients with impaired glucose tolerance (n=8). As for mode of onset, 13 patients had acute infections and one had chronic infection. Of these 14 patients, the most common infection site on admission was lung (n=8), followed by bone (n=5), skin (n=4), gastrointestinal abscess formation (n=3), urinary tract (n=3), aorta (n=2), mediastinal lymph node swelling (n=1), and central nervous system (n=1). Bacteremia was observed in nine patients, and Burkholderia pseudomallei isolates were mostly susceptible to ceftazidime and carbapenem. Overall mortality was 14.3%. Melioidosis is a rare infection in Japan, with all known cases to date having been imported from Southeast Asia. Diabetes was a common risk factor.

Measurement and calculation of radon releases from uranium mill tailings

International Nuclear Information System (INIS)

1992-01-01

The mining and milling of uranium ores produces large quantities of radioactive wastes. Although relatively small in magnitude compared to tailings from metal mining and extraction processes, the present worldwide production of such tailings exceeds 20 million tonnes annually. There is thus a need to ensure that the environmental and health risks from these materials are reduced to an acceptable level. This report has been written as a complement to another publication entitled Current Practices for the Management and Confinement of Uranium Mill Tailings, IAEA Technical Reports Series No. 335, which provides a general overview of all the important factors in the siting, design and construction of tailings impoundments, and in the overall management of tailings with due consideration give to questions of the release of pollutants from tailings piles. The present report provides a comprehensive overview of the release, control and monitoring of radon, including computational methods. The report was first drafted in 1989 and was then reviewed at an Advisory Group meeting in 1990. 42 refs, 9 figs, 3 tabs

Can nanofluidic chemical release enable fast, high resolution neurotransmitter-based neurostimulation?

Directory of Open Access Journals (Sweden)

Peter D Jones

2016-03-01

Full Text Available Artificial chemical stimulation could provide improvements over electrical neurostimulation. Physiological neurotransmission between neurons relies on the nanoscale release and propagation of specific chemical signals to spatially-localized receptors. Current knowledge of nanoscale fluid dynamics and nanofluidic technology allows us to envision artificial mechanisms to achieve fast, high resolution neurotransmitter release. Substantial technological development is required to reach this goal. Nanofluidic technology — rather than microfluidic — will be necessary; this should come as no surprise given the nanofluidic nature of neurotransmission.This perspective reviews the state of the art of high resolution electrical neuroprostheses and their anticipated limitations. Chemical release rates from nanopores are compared to rates achieved at synapses and with iontophoresis. A review of microfluidic technology justifies the analysis that microfluidic control of chemical release would be insufficient. Novel nanofluidic mechanisms are discussed, and we propose that hydrophobic gating may allow control of chemical release suitable for mimicking neurotransmission. The limited understanding of hydrophobic gating in artificial nanopores and the challenges of fabrication and large-scale integration of nanofluidic components are emphasized. Development of suitable nanofluidic technology will require dedicated, long-term efforts over many years.

Implementation of multimode release criteria and dose standard alternatives

International Nuclear Information System (INIS)

Klett, R.

1993-01-01

The current standard that regulates the disposal of high-level radioactive wastes (HLW) and transuranic (TRU) wastes evaluates the cumulative risk of all repositories with a single derived set of generic release limits. This paper reviews the technical basis, attributes, and deficiencies of the present approach and two alternative modifications and extensions. The alternatives are the multimode release limits applied at the point of release and a dose standard alternative suggested at the first Electric Power Research Institute (EPRI) waste disposal workshop. Methods of developing and applying the alternatives are presented and some suggestions are given for incorporating them in the standards

76 FR 66040 - NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft...

Science.gov (United States)

2011-10-25

...-01] NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Draft... draft version of the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0... Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0) (Draft) for public review and...

Controlled release of biofunctional substances by radiation-induced polymerization

International Nuclear Information System (INIS)

Yoshida, M.; Kumakura, M.; Kaetsu, I.

1978-01-01

The release behaviour of a drug from flat circular capsules obtained by radiation-induced polymerization at low temperatures and with different hydrophilic properties has been studied. The effect of various factors on release property was investigated. The release process could be divided into three parts, an initial quick release stage, stationary state release stage and a retarded release stage. Release behaviour in the stationary state was examined using Noyes-Whitney and Higuchi equations. It was shown that the hydrophilic property of polymer matrix expressed by water content was the most important effect on diffusion and release rate. Rigidity of the polymer may also affect diffusivity. The first quick release step could be attributed to rapid dissolution of drug in the matrix surface due to polymer swelling. (author)

Efficient way of importing crude oil from oil producing countries - A review on diversification policy of crude oil import

Energy Technology Data Exchange (ETDEWEB)

Lee, Dal Sok [Korea Energy Economics Institute, Euiwang (Korea)

1999-03-01

Since the second oil crisis, the government has operated the import diversification support program to reduce the risk of crude oil import from Middle-East region and to raise the ability of dealing with the risk. This study tried to seek policy trends in future through reviewing the market environment related to the crude oil import diversification policy and the goal, instrument and effect of the policy. The supply and demand of crude oil and the price are influenced by market system in the world oil market and there are various types of crude oil trading available to both sellers and buyers. There is a probability that the suspension of supply in a certain area could be led to the price issue rather than the physical use of crude oil. In addition, the advantage of price with long-term contract of crude oil was abolished since the price of crude oil imported by term contract has been linked to spot prices. As a result, it is shown that the potential benefit from crude oil import diversification policy is reduced although political and social insecurity still exists in Middle-East region. Therefore, it is desirable to maintain the existing support program until the amount of stored oil reaches the optimum level and to help private enterprises determine the import considering economical efficiency and risk. (author). 36 refs., 5 figs., 23 tabs.

Tritium behavior intentionally released in the room

International Nuclear Information System (INIS)

Kobayashi, K.; Hayashi, T.; Iwai, Y.; Yamanishi, T.; Willms, R. S.; Carlson, R. V.

2008-01-01

To construct a fusion reactor with high safety and acceptability, it is necessary to establish and to ensure tritium safe handling technology. Tritium should be well-controlled not to be released to the environment excessively and to prevent workers from excess exposure. It is especially important to grasp tritium behavior in the final confinement area, such as the room and/or building. In order to obtain data for actual tritium behavior in a room and/or building, a series of intentional Tritium Release Experiments (TREs) were planned and carried out within a radiologically controlled area (main cell) at Tritium System Test Assembly (TSTA) in Los Alamos National Laboratory (LANL) under US-JAPAN collaboration program. These experiments were carried out three times. In these experiments, influence of a difference in the tritium release point and the amount of hydrogen isotope for the initial tritium behavior in the room were suggested. Tritium was released into the main cell at TSTA/LANL. The released tritium reached a uniform concentration about 30 - 40 minutes in all the experiments. The influence of the release point and the amount of hydrogen isotope were not found to be important in these experiments. The experimental results for the initial tritium behavior in the room were also simulated well by the modified three-dimensional eddy flow analysis code FLOW-3D. (authors)

Creative activities: an important agent of change in the process of rebuilding identity - a scoping literature review

DEFF Research Database (Denmark)

Hansen, Bodil Winther; Morville, Anne-Le

Med, Cinahl, PsychInfo, and the Danish library index. Our inclusion criteria were literature that covered the value and meaning of creative activity in general and/or application of creative activities as intervention tool. Peer-reviewed articles, articles and books in English, and Scandinavian languages were......Introduction: Looking back on the history of occupational therapy, creative activities played a major part in the rehabilitation process, but have been diminished during the last decades. This review looks at the importance and application of creative activities in occupational therapy in the 21st...... century. Objectives: The aim of the review was to describe the value and importance of focusing on creative activities in occupational therapy intervention. Method: This scoping review was done as prequel to a book on creativity in occupational therapy, and based on literature search in the databases Pub...

World Health Organization (WHO) guidelines on use of medically important antimicrobials in food-producing animals.

Science.gov (United States)

Aidara-Kane, Awa; Angulo, Frederick J; Conly, John M; Minato, Yuki; Silbergeld, Ellen K; McEwen, Scott A; Collignon, Peter J

2018-01-01

Antimicrobial use in food-producing animals selects for antimicrobial resistance that can be transmitted to humans via food or other transmission routes. The World Health Organization (WHO) in 2005 ranked the medical importance of antimicrobials used in humans. In late 2017, to preserve the effectiveness of medically important antimicrobials for humans, WHO released guidelines on use of antimicrobials in food-producing animals that incorporated the latest WHO rankings. WHO commissioned systematic reviews and literature reviews, and convened a Guideline Development Group (GDG) of external experts free of unacceptable conflicts-of-interest. The GDG assessed the evidence using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach, and formulated recommendations using a structured evidence-to-decision approach that considered the balance of benefits and harms, feasibility, resource implications, and impact on equity. The resulting guidelines were peer-reviewed by an independent External Review Group and approved by the WHO Guidelines Review Committee. These guidelines recommend reductions in the overall use of medically important antimicrobials in food-producing animals, including complete restriction of use of antimicrobials for growth promotion and for disease prevention (i.e., in healthy animals considered at risk of infection). These guidelines also recommend that antimicrobials identified as critically important for humans not be used in food-producing animals for treatment or disease control unless susceptibility testing demonstrates the drug to be the only treatment option. To preserve the effectiveness of medically important antimicrobials, veterinarians, farmers, regulatory agencies, and all other stakeholders are urged to adopt these recommendations and work towards implementation of these guidelines.

A review on important maize diseases and their management in Nepal

OpenAIRE

Subash Subedi

2015-01-01

In Nepal, maize ranks second after rice both in area and production. In recent years, maize area and production has shown a steady increase, but productivity has been low (2.46 t/ha). The major maize producing regions in Nepal are mid hill (72.85%), terai (17.36%) and high hill (9.79%) respectively. A literature review was carried out to explore major maize diseases and their management in Nepal. The omnipresent incidence of diseases at the pre harvest stage has been an important bottleneck ...

76 FR 55391 - Notice of Postponement of Release of Draft NTP Monograph on Potential Developmental Effects of...

Science.gov (United States)

2011-09-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Notice of Postponement of Release of Draft NTP Monograph... Review Draft Monograph AGENCY: Division of the National Toxicology Program (DNTP), National Institute of... NTP monograph and peer review panel meeting. SUMMARY: The NTP is postponing the release of the Draft...

Effectiveness of water release as mitigation for hydroelectric impacts to fish

International Nuclear Information System (INIS)

Lewis, A.F.; Mitchell, A.C.

1995-01-01

Utility companies release water to mitigate the effects of hydroelectric projects on fish habitats. Utility companies, government agencies, and research communities in Canada, the US, Europe, New Zealand, and Australia were surveyed as part of a Canadian Electrical Association study to evaluate the effectiveness of water release as a mitigation. Respondents identified only 28 projects in which water was released specifically to protect fish habitats. Fewer than half of these projects (12) were judged as being effective. Six case histories with preimpact assessment and postimpact monitoring were reviewed. In four cases fish habitat or fish populations or both were maintained; in two cases they were not. The effectiveness of water release differed among rivers and fish species, and was greatest when designed to meet the habitat requirements of each life-history stage. A review of the literature did not support the theory that a particular fraction of the mean annual flow provides the bet fish habitat. Although smaller changes in the flow regime had smaller effects, increasing minimum flows above those historically observed did not necessarily increase fish production

Growth Hormone-Releasing Hormone in Diabetes

Directory of Open Access Journals (Sweden)

Leonid Evsey Fridlyand

2016-10-01

Full Text Available Growth hormone-releasing hormone (GHRH is produced by the hypothalamus and stimulates growth hormone synthesis and release in the anterior pituitary gland. In addition GHRH is an important regulator of cellular functions in many cells and organs. Expression of GHRH G-Protein Coupled Receptor (GHRHR has been demonstrated in different peripheral tissues and cell types including pancreatic islets. Among the peripheral activities, recent studies demonstrate a novel ability of GHRH analogs to increase and preserve insulin secretion by beta-cells in isolated pancreatic islets, which makes them potentially useful for diabetes treatment. This review considers the role of GHRHR in the beta-cell and addresses the unique engineered GHRH agonists and antagonists for treatment of Type 2 diabetes mellitus. We discuss the similarity of signaling pathways activated by GHRHR in pituitary somatotrophs and in pancreatic beta-cells and possible ways as to how the GHRHR pathway can interact with glucose and other secretagogues to stimulate insulin secretion. We also consider the hypothesis that novel GHRHR agonists can improve glucose metabolism in Type 2 diabetes by preserving the function and survival of pancreatic beta-cells. Wound healing and cardioprotective action with new GHRH agonists suggesting that they may prove useful in ameliorating certain diabetic complications. These findings highlight the future potential therapeutic effectiveness of modulators of GHRHR activity for the development of new therapeutic approaches in diabetes and its complications.

Clinical importance of the anterior choroidal artery: a review of the literature.

Science.gov (United States)

Yu, Jing; Xu, Ning; Zhao, Ying; Yu, Jinlu

2018-01-01

The anterior choroidal artery (AChA) is a critical artery in brain physiology and function. The AChA is involved in many diseases, including aneurysm, brain infarct, Moyamoya disease (MMD), brain tumor, arteriovenous malformation (AVM), etc. The AChA is vulnerable to damage during the treatment of these diseases and is thus a very important vessel. However, a comprehensive systematic review of the importance of the AChA is currently lacking. In this study, we used the PUBMED database to perform a literature review of the AChA to increase our understanding of its role in neurophysiology. Although the AChA is a small thin artery, it supplies an extremely important region of the brain. The AChA consists of cisternal and plexal segments, and the point of entry into the choroidal plexus is known as the plexal point. During treatment for aneurysms, tumors, AVM or AVF, the AChA cisternal segments should be preserved as a pathway to prevent the infarction of the AChA target region in the brain. In MMD, a dilated AChA provides collateral flow for posterior circulation. In brain infarcts, rapid treatment is necessary to prevent brain damage. In Parkinson disease (PD), the role of the AChA is unclear. In trauma, the AChA can tear and result in intracranial hematoma. In addition, both chronic and non-chronic branch vessel occlusions in the AChA are clinically silent and should not deter aneurysm treatment with flow diversion. Based on the data available, the AChA is a highly essential vessel.

Fission product release from fuel of water-cooled reactors

International Nuclear Information System (INIS)

Strupczewski, A.; Marks, P.; Klisinska, M.

1997-01-01

The report contains a review of theoretical models and experimental works of gaseous and volatile fission products from uranium dioxide fuel. The experimental results of activity release at low burnup and the model of fission gas behaviour at initial stage of fuel operational cycle are presented. Empirical models as well as measured results of transient fission products release rate in the temperature up to UO 2 melting point, with consideration of their chemical reactions with fuel and cladding, are collected. The theoretical and experimental data were used for calculations of gaseous and volatile fission products release, especially iodine and caesium, to the gas volume of WWER-1000 and WWER-440 type fuel rods at low and high burnup and their further release from defected rods at the assumed loss-of-coolant accident. (author)

In vitro and in vivo evidence of the cytotoxic and genotoxic effects of metal ions released by orthodontic appliances: A review.

Science.gov (United States)

Martín-Cameán, Ana; Jos, Ángeles; Mellado-García, Pilar; Iglesias-Linares, Alejandro; Solano, Enrique; Cameán, Ana M

2015-07-01

Intraoral fixed orthodontic appliances are frequently used in the clinical practice of dentistry. They are made from alloys containing different metals at various percentages. The use of these appliances leads to the long-term exposure of patients to these materials, and the potential toxic effects of this exposure raises concerns about patient safety. Thus, the biocompatibility (corrosion behaviour and toxicity) of these materials has to be evaluated prior to clinical use. In the present report, the most recent studies in the scientific literature examining metal ion release from orthodontic appliances and the toxic effects of these ions have been reviewed with a special focus on cytotoxicity and genotoxicity. Previous studies suggest that a case-by-case safety evaluation is required to take into account the increasing variability of materials, their composition and the manufacturing processes. Moreover, in vivo toxicity studies in regard to metal release, cytotoxicity and genotoxicity are still scarce. Therefore, in vitro and in vivo monitoring studies are needed to establish cause-effect relationships between metal ion release and biomarkers of cytotoxicity and genotoxicity. Further investigations could be performed to elucidate the toxic mechanisms involved in the observed effects with a special emphasis on oxidative damage. Copyright © 2015 Elsevier B.V. All rights reserved.

GEWEX SRB Shortwave Release 4

Science.gov (United States)

Cox, S. J.; Stackhouse, P. W., Jr.; Mikovitz, J. C.; Zhang, T.

2017-12-01

The NASA/GEWEX Surface Radiation Budget (SRB) project produces shortwave and longwave surface and top of atmosphere radiative fluxes for the 1983-near present time period. Spatial resolution is 1 degree. The new Release 4 uses the newly processed ISCCP HXS product as its primary input for cloud and radiance data. The ninefold increase in pixel number compared to the previous ISCCP DX allows finer gradations in cloud fraction in each grid box. It will also allow higher spatial resolutions (0.5 degree) in future releases. In addition to the input data improvements, several important algorithm improvements have been made since Release 3. These include recalculated atmospheric transmissivities and reflectivities yielding a less transmissive atmosphere. The calculations also include variable aerosol composition, allowing for the use of a detailed aerosol history from the Max Planck Institut Aerosol Climatology (MAC). Ocean albedo and snow/ice albedo are also improved from Release 3. Total solar irradiance is now variable, averaging 1361 Wm-2. Water vapor is taken from ISCCP's nnHIRS product. Results from GSW Release 4 are presented and analyzed. Early comparison to surface measurements show improved agreement.

Modeling of fission product release in integral codes

International Nuclear Information System (INIS)

Obaidurrahman, K.; Raman, Rupak K.; Gaikwad, Avinash J.

2014-01-01

The Great Tohoku earthquake and tsunami that stroke the Fukushima-Daiichi nuclear power station in March 11, 2011 has intensified the needs of detailed nuclear safety research and with this objective all streams associated with severe accident phenomenology are being revisited thoroughly. The present paper would cover an overview of state of art FP release models being used, the important phenomenon considered in semi-mechanistic models and knowledge gaps in present FP release modeling. Capability of FP release module, ELSA of ASTEC integral code in appropriate prediction of FP release under several diversified core degraded conditions will also be demonstrated. Use of semi-mechanistic fission product release models at AERB in source-term estimation shall be briefed. (author)

Development of criteria for release of Idaho National Engineering Laboratory sites following decontamination and decommissioning

International Nuclear Information System (INIS)

Kirol, L.

1986-08-01

Criteria have been developed for release of Idaho National Engineering Laboratory (INEL) facilities and land areas following decontamination and decommissioning (D and D). Although these facilities and land areas are not currently being returned to the public domain, and no plans exist for doing so, criteria suitable for unrestricted release to the public were desired. Midway through this study, the implementation of Department of Energy (DOE) Order 5820.2, Radioactive Waste Management, required development of site specific release criteria for use on D and D projects. These criteria will help prevent remedial actions from being required if INEL reuse considerations change in the future. Development of criteria for release of INEL facilities following D and D comprised four study areas: pathways analysis, dose and concentration guidelines, sampling and instrumentation, and implementation procedures. Because of the complex and sensitive nature of the first three categories, a thorough review by experts in those respective fields was desired. Input and support in preparing or reviewing each part of the criteria development task was solicited from several DOE field offices. Experts were identified and contracted to assist in preparing portions of the release criteria, or to serve on a peer-review committee. Thus, the entire release criteria development task was thoroughly reviewed by recognized experts from contractors at several DOE field offices, to validate technical content of the document. Each of the above four study areas was developed originally as an individual task, and a report was generated from each. These reports are combined here to form this document. This release criteria document includes INEL-specific pathways analysis, instrumentation requirements, sampling procedures, the basis for selection of dose and concentration guidelines, and cost-risk-benefit procedures

131I release from a HTGR during the LOFC accident

International Nuclear Information System (INIS)

Foley, J.E.

1975-03-01

The time-dependent release of 131 I from both the core and the containment building of a high temperature gas-cooled (HTGR) reactor during the loss of forced coolant (LOFC) accident is studied. A simplified core release model is combined with a containment building release model so that the total amount of the isotope released to the environment can be calculated. The time-dependent release of 131 I from the core during the LOFC accident is primarily a function of the time-dependent core temperatures and the failed fuel release constants. The most important factor in calculating the amount of the isotope released to the environment is the total amount released into the containment building. (U.S.)

Using polymer-coated controlled-release fertilizers in the nursery and after outplanting

Science.gov (United States)

Thomas D. Landis; R. Kasten Dumroese

2009-01-01

Controlled-release fertilizers (CRF) are the newest and most technically advanced way of supplying mineral nutrients to nursery crops. Compared to conventional fertilizers, their gradual pattern of nutrient release better meets plant needs, minimizes leaching, and therefore improves fertilizer use efficiency. In our review of the literature, we found many terms used...

Clinical importance of median mandibular flexure in oral rehabilitation: a review.

Science.gov (United States)

Sivaraman, K; Chopra, A; Venkatesh, S B

2016-03-01

The mandible has a property to flex inwards around the mandibular symphysis with change in shape and decrease in mandibular arch width during opening and protrusion of the mandible. The mandibular deformation may range from a few micrometres to more than 1 mm. The movement occurs because of the contraction of lateral pterygoid muscles that pulls mandibular condyles medially and causes a sagittal movement of the posterior segments. This movement of mandible can have a profound influence on prognosis and treatment outcome for various restorative, endodontics, fixed, removable and implant-related prosthesis. The review unfolds the causes, importance and clinical implications of median mandibular flexure in oral rehabilitation. This review also highlights the appropriate preventive measures and techniques that should be adopted by clinicians to minimise the effect of flexural movement of the jaw during oral rehabilitation. This would not only help clinicians to achieve a good prosthesis with accurate fit and longevity but also maintain the health of the surrounding periodontal or periimplant gingival tissues and bone. © 2015 John Wiley & Sons Ltd.

Timing crisis information release via television.

Science.gov (United States)

Wei, Jiuchang; Zhao, Dingtao; Yang, Feng; Du, Shaofu; Marinova, Dora

2010-10-01

When and how often to release information on television are important issues in crisis and emergency risk communication. There is a lot of crisis information, including warnings and news, to which people should have access, but most of it is not significantly urgent to interrupt the broadcasting of television programmes. Hence, the right timing for the release of crisis information should be selected based on the importance of the crisis and any associated communication requirements. Using recursive methods, this paper builds an audience coverage model of crisis information release. Based on 2007 Household Using TV (HUT) data for Hefei City, China, the optimal combination of broadcasting sequence (with frequencies between one and eight times) is obtained using the implicit enumeration method. The developed model is applicable to effective transmission of crisis information, with the aim of reducing interference with the normal television transmission process and decreasing the psychological effect on audiences. The same model can be employed for other purposes, such as news coverage and weather and road information. © 2010 The Author(s). Journal compilation © Overseas Development Institute, 2010.

Massive radiological releases profoundly differ from controlled releases

International Nuclear Information System (INIS)

Pascucci-Cahen, Ludivine; Patrick, Momal

2013-01-01

In this article, the authors report identification and assessment of different types of costs associated with nuclear accidents. They first outline that these cost assessments must be as exhaustive or comprehensive as possible. While referring to past accidents, they define the different categories of costs: on-site costs (decontamination and dismantling, electricity not produced on the site), off-site costs (health costs, psychological costs, farming losses), image-related costs (impact on food and farm product exports, decrease of other exports), costs related to energy production, costs related to contaminated areas (refugees, lands). They give an assessment of a severe nuclear accident (i.e. an accident with important but controlled radiological releases) in France and outline that it would be a national catastrophe which could be however managed. They discuss the possible variations of the estimated costs. Then, they show that a major accident (i.e. an accident with massive radiological releases) in France would be an unmanageable European catastrophe because of the radiological consequences, of high economic costs, and of huge losses

UV imaging for in vitro dissolution and release studies: Initial experiences

DEFF Research Database (Denmark)

Østergaard, Jesper; Lenke, James; Jensen, Sabrine Smedegaard

2014-01-01

UV imaging has recently been introduced as a method in drug dissolution and release testing. Spatially and temporally resolved mapping of drug oncentrations in a 7 × 9 mm imaging area provides new opportunities for visualization and study of drug dissolution and release. This review describes...... in hydrogels with relevance for characterization of parenteral depots. UV imaging may be of particular use when the amounts of material are sparse and detailed insights into dissolution and release processes are required, that is in solid form screening, preformulation, and early drug development....

Review of extended-release formulations of Tramadol for the management of chronic non-cancer pain: focus on marketed formulations

Science.gov (United States)

Kizilbash, Arshi; Ngô-Minh, Cường

2014-01-01

Patients with chronic non-malignant pain report impairments of physical, social, and psychological well-being. The goal of pain management should include reducing pain and improving quality of life. Patients with chronic pain require medications that are able to provide adequate pain relief, have minimum dosing intervals to maintain efficacy, and avoid breakthrough pain. Tramadol has proven efficacy and a favourable safety profile. The positive efficacy and safety profile has been demonstrated historically in numerous published clinical studies as well as from post-marketing experience. It is a World Health Organization “Step 2” opioid analgesic that has been shown to be effective, well-tolerated, and valuable, where treatment with strong opioids is not required. A number of extended release formulations of Tramadol are available in Canada and the United States. An optimal extended release Tramadol formulation would be expected to provide consistent pain control with once daily dosing, few sleep interruptions, flexible dosing schedules, and no limitation on taking with meals. Appropriate treatment options should be based on the above proposed attributes. A comparative review of available extended release Tramadol formulations shows that these medications are not equivalent in their pharmacokinetic profile and this may have implications for selecting the optimal therapy for patients with pain syndromes where Tramadol is an appropriate analgesic agent. Differences in pharmacokinetics amongst the formulations may also translate into varied clinical responses in patients. Selection of the appropriate formulation by the health care provider should therefore be based on the patient’s chronic pain condition, needs, and lifestyle. PMID:24711710

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) (External Review Draft)

Science.gov (United States)

The IRIS Toxicological Review of tert-Butyl Alcohol (tert-Butanol) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting ...

The sterile-male-release technique in Great Lakes sea lamprey management

Science.gov (United States)

Twohey, Michael B.; Heinrich, John W.; Seelye, James G.; Fredricks, Kim T.; Bergstedt, Roger A.; Kaye, Cheryl A.; Scholefield, Ron J.; McDonald, Rodney B.; Christie, Gavin C.

2003-01-01

The implementation of a sterile-male-release technique from 1991 through 1999 and evaluation of its effectiveness in the Great Lakes sea lamprey (Petromyzon marinus) management program is reviewed. Male sea lampreys were injected with the chemosterilant bisazir (P,P-bis(1-aziridinyl)-N-methylphosphinothioic amide) using a robotic device. Quality assurance testing indicated the device delivered a consistent and effective dose of bisazir. Viability of embryos in an untreated control group was 64% compared to 1% in a treatment group. A task force developed nine hypotheses to guide implementation and evaluation of the technique. An annual average of 26,000 male sea lampreys was harvested from as many as 17 Great Lakes tributaries for use in the technique. An annual average of 16,100 sterilized males was released into 33 tributaries of Lake Superior to achieve a theoretical 59% reduction in larval production during 1991 to 1996. The average number of sterile males released in the St. Marys River increased from 4,000 during 1991 to 1996 to 20,100 during 1997 to 1999. The theoretical reduc-stertion in reproduction when combined with trapping was 57% during 1991 to 1996 and 86% during 1997 to 1999. Evaluation studies demonstrated that sterilized males were competitive and reduced production of larvae in streams. Field studies and simulation models suggest reductions in reproduction will result in fewer recruits, but there is risk of periodic high recruitment events independent of sterile-male release. Strategies to reduce reproduction will be most reliable when low densities of reproducing females are achieved. Expansion of the technique is limited by access to additional males for sterilization. Sterile-male release and other alternative controls are important in delivering integrated pest management and in reducing reliance on pesticides.

Minimizing lead release levels in secondary smelters slags

International Nuclear Information System (INIS)

Shenkler, E.S.; Graham, S.; Ghosh, R.; Greenhut, V.A.

1991-01-01

Five lead-containing slags and four mattes were analyzed to reveal microstructure, semi-quantitative microchemistry, and phases present. To determine if the slags could be incorporated as a glass so that lead release levels could be stabilized, glass batches were formulated based on slag compositions. Leaching tests showed that all materials that were fritted in a glass batch had lower lead release levels than non-adjusted materials, and all could satisfy EPA test requirements. The mole ratio of glass modifiers to glass formers played an important role in the extent of lead release. Small additions of phosphate to a batch had a significant effect on lowering lead release levels

Radioactive releases into the environment under accidental conditions

International Nuclear Information System (INIS)

Beninson, D.

1976-01-01

Although accidents involving the release of radioactive materials and the unplanned exposure of people can occur at any stage of the nuclear fuel cycle, most attention has been focused on reactor accidents. Although no power reactor accidents involving exposure of the public have yet occured, it should be recognized that the probability of such accidental releases cannot be reduced to zero. Since the inventory of radioactive materials in power reactors is very large, it is usual to postulate, for safety assessments, that a release of fission products takes place in spite of all protective measures. This postulated release is of importance for reactor siting and for preparing emergency plans. (HP) [de

Imported melioidosis in Japan: a review of cases

Directory of Open Access Journals (Sweden)

Hadano Y

2018-01-01

Full Text Available Yoshiro Hadano Department of Infectious Diseases, St. Mary’s Hospital, Kurume, Fukuoka, Japan Abstract: Fourteen cases of reported melioidosis in Japan were reviewed. The mean age was 52.4 years (33–69 years, and all patients were male. All of the presumed exposures originated in Southeast Asia. The most common underlying disease was diabetes mellitus, including those patients with impaired glucose tolerance (n=8. As for mode of onset, 13 patients had acute infections and one had chronic infection. Of these 14 patients, the most common infection site on admission was lung (n=8, followed by bone (n=5, skin (n=4, gastrointestinal abscess formation (n=3, urinary tract (n=3, aorta (n=2, mediastinal lymph node swelling (n=1, and central nervous system (n=1. Bacteremia was observed in nine patients, and Burkholderia pseudomallei isolates were mostly susceptible to ceftazidime and carbapenem. Overall mortality was 14.3%. Melioidosis is a rare infection in Japan, with all known cases to date having been imported from Southeast Asia. Diabetes was a common risk factor. Keywords: melioidosis, Burkholderia pseudomallei, Japan, Southeast Asia 

Investigation of delayed fission gas release

International Nuclear Information System (INIS)

Cayet, Nicolas

1996-05-01

The study of the fission gas release process in the high burnup rig IFA-562 has revealed a particular fuel behaviour: a delay in the fission gas release process. It appeared that an important release of gas was measured by the pressure transducers once the power had decreased, whereas, during steady-state operation, the pressure did not increase very much. After examinations, the gap size has been concluded to be the main parameter involving this delay. However the burnup could have been a potential factor, its role is mainly to close the gap by swelling. The observations of low burnup rods have shown the same delayed fission gas release, the gap being small by design and closed essentially by thermal expansion. The study of the kinetics has demonstrated the time-independency of the phenomenon. Thus the proposed mechanism driving this delayed fission gas release would involve three consecutives stages. During steady-state, the gas is released into the interlinkage network of grain boundary bubbles and cracks. Due to the closed gap, the gas is trapped in some void volumes, unable to escape the pellet. During power reduction, the gap and some old/new cracks open, immediately providing a path for the gas to the pressure transducers and explaining this delay in the fission gas release. (author)

Understanding Drug Release Data through Thermodynamic Analysis.

Science.gov (United States)

Freire, Marjorie Caroline Liberato Cavalcanti; Alexandrino, Francisco; Marcelino, Henrique Rodrigues; Picciani, Paulo Henrique de Souza; Silva, Kattya Gyselle de Holanda E; Genre, Julieta; Oliveira, Anselmo Gomes de; Egito, Eryvaldo Sócrates Tabosa do

2017-06-13

Understanding the factors that can modify the drug release profile of a drug from a Drug-Delivery-System (DDS) is a mandatory step to determine the effectiveness of new therapies. The aim of this study was to assess the Amphotericin-B (AmB) kinetic release profiles from polymeric systems with different compositions and geometries and to correlate these profiles with the thermodynamic parameters through mathematical modeling. Film casting and electrospinning techniques were used to compare behavior of films and fibers, respectively. Release profiles from the DDSs were performed, and the mathematical modeling of the data was carried out. Activation energy, enthalpy, entropy and Gibbs free energy of the drug release process were determined. AmB release profiles showed that the relationship to overcome the enthalpic barrier was PVA-fiber > PVA-film > PLA-fiber > PLA-film. Drug release kinetics from the fibers and the films were better fitted on the Peppas-Sahlin and Higuchi models, respectively. The thermodynamic parameters corroborate these findings, revealing that the AmB release from the evaluated systems was an endothermic and non-spontaneous process. Thermodynamic parameters can be used to explain the drug kinetic release profiles. Such an approach is of utmost importance for DDS containing insoluble compounds, such as AmB, which is associated with an erratic bioavailability.

Understanding Drug Release Data through Thermodynamic Analysis

Science.gov (United States)

Freire, Marjorie Caroline Liberato Cavalcanti; Alexandrino, Francisco; Marcelino, Henrique Rodrigues; Picciani, Paulo Henrique de Souza; Silva, Kattya Gyselle de Holanda e; Genre, Julieta; de Oliveira, Anselmo Gomes; do Egito, Eryvaldo Sócrates Tabosa

2017-01-01

Understanding the factors that can modify the drug release profile of a drug from a Drug-Delivery-System (DDS) is a mandatory step to determine the effectiveness of new therapies. The aim of this study was to assess the Amphotericin-B (AmB) kinetic release profiles from polymeric systems with different compositions and geometries and to correlate these profiles with the thermodynamic parameters through mathematical modeling. Film casting and electrospinning techniques were used to compare behavior of films and fibers, respectively. Release profiles from the DDSs were performed, and the mathematical modeling of the data was carried out. Activation energy, enthalpy, entropy and Gibbs free energy of the drug release process were determined. AmB release profiles showed that the relationship to overcome the enthalpic barrier was PVA-fiber > PVA-film > PLA-fiber > PLA-film. Drug release kinetics from the fibers and the films were better fitted on the Peppas–Sahlin and Higuchi models, respectively. The thermodynamic parameters corroborate these findings, revealing that the AmB release from the evaluated systems was an endothermic and non-spontaneous process. Thermodynamic parameters can be used to explain the drug kinetic release profiles. Such an approach is of utmost importance for DDS containing insoluble compounds, such as AmB, which is associated with an erratic bioavailability. PMID:28773009

Review of survey data on the importance of energy efficiency to new home buyers

Energy Technology Data Exchange (ETDEWEB)

Hendrickson, P.L.

1984-10-01

The surveys reviewed for this report support the notion that the Council's model conservation standards will be received reasonably well and can be successfully marketed. A number of subtopics are addressed including the home purchase process and the role of energy efficiency considerations in the process, the importance of energy efficiency considerations in the decision to purchase a new home, the relative importance of energy efficiency in comparison to other home selection attributes, homeowner preferences for particular energy efficiency features, and measures of the willingness to pay for energy efficiency improvements.

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (External Review Draft)

Science.gov (United States)

The IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting the ETB...

Environmental Release Prevention and Control Plan (ERP and CP) annual review and update for 1993

International Nuclear Information System (INIS)

Jannik, G.T.; Mamatey, A.; Arnett, M.

1993-01-01

In the Environmental Release Prevention and Control Plan (ERP and CP), WSRC made a commitment to conduct the following follow-up activities and actions: (1) Complete the action items developed in response to the findings and recommendation of the Environmental Release Prevention Taskteam (WSRC-RP-92-356). (2) Complete all batch and continuous release procedure revisions to incorporate the attributes that WSRC senior management required of each procedure. (3) DOE-SR Assistance Managers and WSRC counterparts to reach consensus and closure on the identified engineered solutions documented in the ERP and CP, develop and drive implementation of facility changes per the agreements. (4) Continue to analyze releases and monitor performance in accordance with the ERP and CP, and utilize the ALARA Release Guides Committee to drive improvements. (5) Conduct annual re-evaluations of the cost benefit analyses of the identified engineered solutions, and identify new options and alternatives for each outfall in response to site mission and facility changes. This report documents the efforts that have been completed over the past year in response to these commitments

Important Aspects of Pharmacist-led Medication Reviews in an Acute Medical Ward

DEFF Research Database (Denmark)

Bülow, Cille; Faerch, Kirstine Ullitz; Armandi, Helle

2018-01-01

In some hospitals, clinical pharmacists review the medication to find drug-related problems (DRPs) in acutely admitted patients. We aimed to identify the nature of identified DRPs and investigate factors of potential importance for the clinical implementation of pharmacist suggestions. In 100.......05). The most frequently implemented suggestions were based on DRPs concerning 'indication for drug treatment not noticed', 'inappropriate drug form' and 'drug dose too low', with implementation rates of 83%, 67% and 63%, respectively. In our sample, the pharmacist's MR suggestions were only implemented...

Gaseous release of radioactive iodine from decaying plants. I. Release following foliar and root uptake

International Nuclear Information System (INIS)

Saas, Arsene; Grauby, Andre

1975-12-01

Iodine uptake by plants is a significant link in the contamination of the food chain. Long half-live iodine was studied considering foliar and root uptake, loss by rain scavenging, residue decay or outgassing in order to assess two aspects of the problem: the importance of outgassing and the effect of the route of transfer on iodine losses. It appeared that iodine release was a function of the vegetal type, there were differences according to the pattern of absorption (via leaf or root) and the processes of iodine release were usually related to biochemical mechanisms [fr

Release of nanomaterials from solid nanocomposites and consumer exposure assessment - a forward-looking review

DEFF Research Database (Denmark)

Mackevica, Aiga; Hansen, Steffen Foss

2016-01-01

of the studies report their findings in a format that can be used for exposure assessment under REACH, and most do not include characterization of the released particles. Although inhalation, dermal, and oral exposures can be derived using the guidelines on how to complete consumer exposure assessments under......The European chemical legislation requires manufacturers and importers of chemicals to do consumer exposure assessment when the chemical has certain hazards associated to it (e.g. explosive, carcinogenicity, and hazardous to the aquatic environment), but the question is how this obligation can...... be met in light of the scientific uncertainty and technical challenges related to exposure assessment of nanomaterials. In this paper, we investigate to what extent the information and data in the literature can be used to perform consumer exposure assessment according to the REACH requirements and we...

A review on important maize diseases and their management in Nepal

Directory of Open Access Journals (Sweden)

Subash Subedi

2015-12-01

Full Text Available In Nepal, maize ranks second after rice both in area and production. In recent years, maize area and production has shown a steady increase, but productivity has been low (2.46 t/ha. The major maize producing regions in Nepal are mid hill (72.85%, terai (17.36% and high hill (9.79% respectively. A literature review was carried out to explore major maize diseases and their management in Nepal. The omnipresent incidence of diseases at the pre harvest stage has been an important bottleneck in increasing production. Till now, a total of 78 (75 fungal and 3 bacterial species are pathogenic to maize crop in Nepal. The major and economically important maize diseases reported are Gray leaf spot, Northern leaf blight, Southern leaf Blight, Banded leaf and sheath blight, Ear rot, Stalk rot, Head smut, Common rust, Downy mildew and Brown spot. Information on bacterial and virus diseases, nematodes and yield loss assessment is also given. Description of the major maize diseases, their causal organisms, distribution, time and intensity of disease incidence, symptoms, survival, spreads, environmental factors for disease development, yield losses and various disease management strategies corresponded to important maize diseases of Nepal are gathered and compiled thoroughly from the available publications. Concerted efforts of NARC commodity programs, divisions, ARS and RARS involving research on maize pathology and their important outcomes are mentioned. The use of disease management methods focused on host resistance has also been highlighted.

Assessment of radiological releases to the environment from a fusion reactor power plant

International Nuclear Information System (INIS)

Shank, K.E.; Oakes, T.W.; Easterly, C.E.

1978-05-01

This report summarizes the expected tritium and activation-product inventories and presents an assessment of the potential radiological releases from a fusion reactor power plant, hypothetically located at the Oak Ridge National Laboratory. Routine tritium releases and the resulting dose assessment are discussed. Uncertainties associated with the conversion of tritium gas to tritium oxide and the global tritium cycling are evaluated. The difficulties of estimating releases of activated materials and the subsequent dose commitment are reviewed

Recoil release of fission products from nuclear fuel

International Nuclear Information System (INIS)

Wise, C.

1985-01-01

An analytical approximation is developed for calculating recoil release from nuclear fuel into gas filled interspaces. This expression is evaluated for a number of interspace geometries and shown to be generally accurate to within about 10% by comparison with numerical calculations. The results are applied to situations of physical interest and it is demonstrated that recoil can be important when modelling fission product release from low temperature CAGR pin failures. Furthermore, recoil can contribute significantly in experiments on low temperature fission product release, particularly where oxidation enhancement of this release is measured by exposing the fuel to CO 2 . The calculations presented here are one way of allowing for this, other methods are suggested. (orig.)

Assessment of the important radionuclides in nuclear waste

International Nuclear Information System (INIS)

Kerrisk, J.F.

1985-10-01

The relative importance of the various radionuclides contained in nuclear waste has been assessed by consideration of (1) the quantity of each radionuclide present, (2) the Environmental Protection Agency's release limits for radionuclides, (3) how retardation processes such as solubility and sorption affect radionuclie transport, and (4) the physical and chemical forms of radionuclides in the waste. Three types of waste were reviewed: spent fuel, high-level waste, and defense high-level waste. Conditions specific to the Nevada Nuclear Waste Storage Investigations project potential site at Yucca Mountain were used to describe radionuclide transport. The actinides Am, Pu, Np, and U were identified as the waste elements for which solubility and sorption data were most urgently needed. Other important waste elements were identified as Sr, Cs, C, Ni, Zr, Tc, Th, Ra, and Sn. Under some conditions, radionuclides of three elements (C, Tc, and I) may have high solubility and negligible sorption. The potential for transport of some waste elements (C and I) in the gas phase must also be evaluated for the Yucca Mountain Site. 12 refs., 17 tabs

Dams release methane even in temperate zoned

International Nuclear Information System (INIS)

Lemarchand, F.

2010-01-01

The Wohlen lake (near Bern) is a retaining dam built 90 years ago that has undergone a campaign to measure the quantity of methane released. The campaign lasted 1 year and the result was unexpected: 0.15 g/m 2 *day which one of the highest release rates in temperate zones. This result is all the more stunning since water stays only 2 days in average in the reservoir and that the drowned area is not important. In fact the river Aar that feeds the lake is loaded with organic matter coming from humane activities: agriculture and 3 sewage plants. This organic matter decays in the lake releasing methane. (A.C.)

Estimate of radionuclide release characteristics into containment under severe accident conditions

International Nuclear Information System (INIS)

Nourbakhsh, H.P.

1993-11-01

A detailed review of the available light water reactor source term information is presented as a technical basis for development of updated source terms into the containment under severe accident conditions. Simplified estimates of radionuclide release and transport characteristics are specified for each unique combination of the reactor coolant and containment system combinations. A quantitative uncertainty analysis in the release to the containment using NUREG-1150 methodology is also presented

Sensitivity of the engineered barrier system (EBS) release rate to alternative conceptual models of advective release from waste packages under dripping fractures

International Nuclear Information System (INIS)

Lee, J.H.; Atkins, J.E.; McNeish, J.A.; Vallikat, V.

1996-01-01

The first model assumed that dripping water directly contacts the waste form inside the ''failed'' waste package and radionuclides are released from the EBS by advection. The second model assumed that dripping water is diverted around the package (because of corrosion products plugging the perforations), thereby being prevented from directly contacting the waste form. In the second model, radionuclides were assumed to diffuse through the perforations, and, once outside the waste package, to be released from the EBS by advection. For the case with the second EBS release model, most radionuclides had lower peak EBS release rates than with the first model. Impacts of the alternative EBS release models were greater for the radionuclides with low solubility. The analysis indicated that the EBS release model representing advection through a ''failed'' waste package (the first model) may be too conservative; thus a ''failed'' waste package container with multiple perforations may still be an important barrier to radionuclide release

Review of important rock mechanics studies required for underground high level nuclear waste repository program

Energy Technology Data Exchange (ETDEWEB)

Kwon, S.; Cho, W. J

2007-01-15

Disposal concept adapting room and pillar method, which is a confirmed technique in mining and tunnel construction for long time, has advantages at cost, safety, technical feasibility, flexibility, and international cooperation point of views. Then the important rock mechanics principals and in situ and laboratory tests for understanding the behavior of rock, buffer, and backfill as well as their interactions will be reviewed. The accurate understanding of them is important for developing a safe disposal concept and successful operation of underground repository for permanent disposal of radioactive wastes. First of all, In this study, current status of rock mechanics studies for HLW disposal in foreign countries such as Sweden, USA, Canada, Finland, Japan, and France were reviewed. After then the in situ and laboratory tests for site characterization were summarized. Furthermore, rock mechanics studies required during the whole procedure for the disposal project from repository design to the final closure will be reviewed systematically. This study will help for developing a disposal system including site selection, repository design, operation, maintenance, and closure of a repository in deep underground rock. By introducing the required rock mechanics tests at different stages, it would be helpful from the planning stage to the operation stage of a radioactive waste disposal project.

Review of important rock mechanics studies required for underground high level nuclear waste repository program

International Nuclear Information System (INIS)

Kwon, S.; Cho, W. J.

2007-01-01

Disposal concept adapting room and pillar method, which is a confirmed technique in mining and tunnel construction for long time, has advantages at cost, safety, technical feasibility, flexibility, and international cooperation point of views. Then the important rock mechanics principals and in situ and laboratory tests for understanding the behavior of rock, buffer, and backfill as well as their interactions will be reviewed. The accurate understanding of them is important for developing a safe disposal concept and successful operation of underground repository for permanent disposal of radioactive wastes. First of all, In this study, current status of rock mechanics studies for HLW disposal in foreign countries such as Sweden, USA, Canada, Finland, Japan, and France were reviewed. After then the in situ and laboratory tests for site characterization were summarized. Furthermore, rock mechanics studies required during the whole procedure for the disposal project from repository design to the final closure will be reviewed systematically. This study will help for developing a disposal system including site selection, repository design, operation, maintenance, and closure of a repository in deep underground rock. By introducing the required rock mechanics tests at different stages, it would be helpful from the planning stage to the operation stage of a radioactive waste disposal project

Barrier and operational risk analysis of hydrocarbon releases (BORA-Release)

International Nuclear Information System (INIS)

Sklet, Snorre; Vinnem, Jan Erik; Aven, Terje

2006-01-01

This paper presents results from a case study carried out on an offshore oil and gas production platform with the purpose to apply and test BORA-Release, a method for barrier and operational risk analysis of hydrocarbon releases. A description of the BORA-Release method is given in Part I of the paper. BORA-Release is applied to express the platform specific hydrocarbon release frequencies for three release scenarios for selected systems and activities on the platform. The case study demonstrated that the BORA-Release method is a useful tool for analysing the effect on the release frequency of safety barriers introduced to prevent hydrocarbon releases, and to study the effect on the barrier performance of platform specific conditions of technical, human, operational, and organisational risk influencing factors (RIFs). BORA-Release may also be used to analyse the effect on the release frequency of risk reducing measures

Assessment of effectiveness of geologic isolation systems. A conceptual simulation model for release scenario analysis of a hypothetical site in Columbia Plateau Basalts

International Nuclear Information System (INIS)

Stottlemyre, J.A.; Petrie, G.M.; Benson, G.L.; Zellmer, J.T.

1981-01-01

This report is a status report for an evolving methodology for release scenario development for underground nuclear waste repositories. As such, it is intended for use as a reference point and a preliminary description of an evolving geoscience methodology. When completed this methodology will be used as a tool in developing disruptive release scenarios for analyzing the long-term safety of geological nuclear waste repositories. While a basalt environment is used as an example, this report is not intended to reflect an actual site safety assessment for a repository in a media. It is rather intended to present a methodology system framework and to provide discussions of the geological phenomena and parameters that must be addressed in order to develop a methodology for potential release scenarios. It is also important to note that the phenomena, their interrelationships, and their relative importance along with the overall current structure of the model will change as new geological information is gathered through additional peer review, geotechnical input, site specific field work, and related research efforts

Understanding Drug Release Data through Thermodynamic Analysis

Directory of Open Access Journals (Sweden)

Marjorie Caroline Liberato Cavalcanti Freire

2017-06-01

Full Text Available Understanding the factors that can modify the drug release profile of a drug from a Drug-Delivery-System (DDS is a mandatory step to determine the effectiveness of new therapies. The aim of this study was to assess the Amphotericin-B (AmB kinetic release profiles from polymeric systems with different compositions and geometries and to correlate these profiles with the thermodynamic parameters through mathematical modeling. Film casting and electrospinning techniques were used to compare behavior of films and fibers, respectively. Release profiles from the DDSs were performed, and the mathematical modeling of the data was carried out. Activation energy, enthalpy, entropy and Gibbs free energy of the drug release process were determined. AmB release profiles showed that the relationship to overcome the enthalpic barrier was PVA-fiber > PVA-film > PLA-fiber > PLA-film. Drug release kinetics from the fibers and the films were better fitted on the Peppas–Sahlin and Higuchi models, respectively. The thermodynamic parameters corroborate these findings, revealing that the AmB release from the evaluated systems was an endothermic and non-spontaneous process. Thermodynamic parameters can be used to explain the drug kinetic release profiles. Such an approach is of utmost importance for DDS containing insoluble compounds, such as AmB, which is associated with an erratic bioavailability.

Sustainable livable housing: A review of what traditional urban areas residents find important

Directory of Open Access Journals (Sweden)

Musibau Lukuman

2017-09-01

Full Text Available Sustainable livable housing is pre-condition for healthy living, improve quality of life and critical to economic and social survival. It also encompasses various aspects that predominantly depend on economic, social, cultural and environmental (ESCE conditions within the locality. To this end, this paper seeks to explore, classify and assess the sustainable livable housing attributes from the existing literatures through content analysis. A review of literature revealed a total of ninety two (92 constructs, which were further grouped nine (9 livable housing-related attributes groups. Well-structured questionnaires were administered to residents of traditional urban areas (TUA of Iwo Osun State, Nigeria with ninety two (92 constructs on Likert scale. Data were analyzed using descriptive statistic and relative importance index (RII. Out of (92 constructs from nine (9 livable housing-related attributes groups, the results identified seventy eight (78 important attributes (i.e. 35 most important and 43 important across groups and construct that TUA residents found important. Over RII was 0.409 for overall assessment of sustainable livable housing condition by TUA residents indicating that TUA residents are dissatisfied with their current housing conditions.

The use of consequence modelling in assessing accidental releases of activity

International Nuclear Information System (INIS)

Clarke, R.H.; Hemming, C.R.; Kelly, G.N.

1982-01-01

The radiological consequences of an accidental release can be expressed as the number of health effects in the exposed population and its descendents, and the economic and social implications that may result from restrictions placed on the consumption of foodstuffs, or on the occupation of domestic and commercial premises. For any given release of activity there will be a probability distribution of consequences which will depend on the meteorological characteristics and demographic data particular to the release location. The characteristics of this distribution should be important in reaching judgements on the acceptability of a given site or design. The relative importance of the different endpoints is analysed and the influence of the release location on the resulting distribution is considered. (author)

Cycle of radionuclides released into waters by the nuclear industry

International Nuclear Information System (INIS)

Bovard, A.; Grauby, A.

1975-01-01

A review is made of the main radionuclides released by nuclear industry into the aquatic environment. The water-sediment interactions, the uptake of radionuclides by aquatic organisms and the problem of irrigation water are considered [fr

Comparison and analysis of release scenarios for ground disposal of various nations

International Nuclear Information System (INIS)

Sakata, Sadahiro; Nakai, Kunihiro

1985-01-01

This report is aimed at comparing and analyzing the concept and evaluation methods of varuous foreign countries concerning their release scenarios for ground disposal of low- and high-level radioactive wastes in order to provide helpful information to be used in developing release scenarios for Japan. The groundwater release scenario and human intrusion scenario should particularly be well examined in considering shallow ground disposal of low-level wastes. Assessment of the leaching rate is important for a groundwater release scenario. Experimental data and verification tests are required to support the simplified model to be used for safety assessment. Evaluation of the radioactive nucleide inventory is also important for ground disposal of low-level wastes. An evaluation system should be established as soon as possible. For ground disposal of high-level radioactive wastes, on the other hand, it will become increasingly important to establish performance assessment models for practical evaluation of the rate of release from the engineered barrier and to collect test and verification data for suporting them. (Nogami, K.)

The environmental impact of radioactive releases from accidents in nuclear power reactors

International Nuclear Information System (INIS)

Beattie, J.R.; Griffiths, R.F.; Kaiser, G.D.; Kinchin, G.H.

1978-01-01

A survey of accidental releases of radioactivity from thermal and fast reactors is presented. Following a general discussion on the hazards involved, the nature of the environmental impact of radioactive releases is examined. This includes a brief review of the natural radiation background, the effect on human health of various levels of radiation and radioactivity, permissible and reference levels, and the type of hazards from both passing clouds of airbourne radioactive material and from ground deposited material. The problem of atmospheric dispersion and methods of calculations of radioactive materials in the atmosphere are examined in order for the consequences of accidental release to be analysed. National accidents and their environmental consequences are then examined. Finally there is a review of the risks to which man is always exposed because of his environment. Common and collective risks are also considered. Conclusions are reached as to the acceptibility or otherwise of the environmental impact of reactor accidents. (U.K.)

The effect of ketamine on intraspinal acetylcholine release

DEFF Research Database (Denmark)

Abelson, Klas S P; Goldkuhl, Renée Röstlinger; Nylund, Anders

2006-01-01

The general anaesthetic ketamine affects the central cholinergic system in several manners, but its effect on spinal acetylcholine release, which may be an important transmitter in spinal antinociception, is unknown. This study aimed to investigate the effect of ketamine on spinal acetylcholine...... release. Microdialysis probes were placed intraspinally in male rats, and acetylcholine was quantified with HPLC. Anaesthesia was switched from isoflurane (1.3%) to ketamine (150 mg/kg h), which resulted in a 500% increased acetylcholine release. The increase was attenuated during nicotinic receptor...... blockade (50 microM mecamylamine). The nicotinic receptor agonist epibatidine (175 microM) produced a ten-fold higher relative increase of acetylcholine release during isoflurane anaesthesia compared to ketamine anaesthesia (270% to 27%). Intraspinal administration of ketamine and norketamine both...

Diffusion rates for elevated releases

International Nuclear Information System (INIS)

Ramsdell, J.V.

1983-11-01

A search of the literature related to diffusion from elevated sources has determined that an adequate data base exists for use in developing parameterizations for estimating diffusion rates for material released from free standing stacks at nuclear power plants. A review of published data analyses indicates that a new parameterization of horizontal diffusion rates specifically for elevated releases is not likely to significantly change the magnitudes of horizontal diffusion coefficients on the average. However, the uncertainties associated with horizontal diffusion coefficient estimates under any given set of atmospheric conditions could be reduced by a new parameterization. Similarly, a new parameterization of vertical diffusion rates would be unlikely to significantly alter the magnitudes of diffusion coefficients for unstable atmospheric conditons. However, for neutral and stable atmospheric conditions, a new parameterization of vertical diffusion rates might increase vertical diffusion coefficients significantly. The increase would move ground-level time-integrated concentration maxima closer to the plant and would increase the maxima. 55 references, 2 figures, 4 tables

Examination of Mechanisms Responsible for Organic Dust-related Diseases: Mediator Release induced by Microorgansims. A review

DEFF Research Database (Denmark)

Norn, Svend; Clementsen, Paul; Kristensen, K.S.

1994-01-01

Farmakologi, org. dust-related diseases, bacteria, pathogenic mechanisms, mediator release, entoxins - fungal spores......Farmakologi, org. dust-related diseases, bacteria, pathogenic mechanisms, mediator release, entoxins - fungal spores...

Meticulous Overview on the Controlled Release Fertilizers

Directory of Open Access Journals (Sweden)

Siafu Ibahati Sempeho

2014-01-01

Full Text Available Owing to the high demand for fertilizer formulations that will exhaust the possibilities of nutrient use efficiency (NUE, regulate fertilizer consumption, and lessen agrophysicochemical properties and environmental adverse effects instigated by conventional nutrient supply to crops, this review recapitulates controlled release fertilizers (CRFs as a cutting-edge and safe way to supply crops’ nutrients over the conventional ways. Essentially, CRFs entail fertilizer particles intercalated within excipients aiming at reducing the frequency of fertilizer application thereby abating potential adverse effects linked with conventional fertilizer use. Application of nanotechnology and materials engineering in agriculture particularly in the design of CRFs, the distinctions and classification of CRFs, and the economical, agronomical, and environmental aspects of CRFs has been revised putting into account the development and synthesis of CRFs, laboratory CRFs syntheses and testing, and both linear and sigmoid release features of CRF formulations. Methodical account on the mechanism of nutrient release centring on the empirical and mechanistic approaches of predicting nutrient release is given in view of selected mathematical models. Compositions and laboratory preparations of CRFs basing on in situ and graft polymerization are provided alongside the physical methods used in CRFs encapsulation, with an emphasis on the natural polymers, modified clays, and superabsorbent nanocomposite excipients.

Tritium Room Air Monitor Operating Experience Review

Energy Technology Data Exchange (ETDEWEB)

L. C. Cadwallader; B. J. Denny

2008-09-01

Monitoring the breathing air in tritium facility rooms for airborne tritium is a radiological safety requirement and a best practice for personnel safety. Besides audible alarms for room evacuation, these monitors often send signals for process shutdown, ventilation isolation, and cleanup system actuation to mitigate releases and prevent tritium spread to the environment. Therefore, these monitors are important not only to personnel safety but also to public safety and environmental protection. This paper presents an operating experience review of tritium monitor performance on demand during small (1 mCi to 1 Ci) operational releases, and intentional airborne inroom tritium release tests. The tritium tests provide monitor operation data to allow calculation of a statistical estimate for the reliability of monitors annunciating in actual tritium gas airborne release situations. The data show a failure to operate rate of 3.5E-06/monitor-hr with an upper bound of 4.7E-06, a failure to alarm on demand rate of 1.4E-02/demand with an upper bound of 4.4E-02, and a spurious alarm rate of 0.1 to 0.2/monitor-yr.

Controlled release of volatiles under mild reaction conditions: from nature to everyday products.

Science.gov (United States)

Herrmann, Andreas

2007-01-01

Volatile organic compounds serve in nature as semiochemicals for communication between species, and are often used as flavors and fragrances in our everyday life. The quite limited longevity of olfactive perception has led to the development of pro-perfumes or pro-fragrances--ideally nonvolatile and odorless fragrance precursors which release the active volatiles by bond cleavage. Only a limited amount of reaction conditions, such as hydrolysis, temperature changes, as well as the action of light, oxygen, enzymes, or microorganisms, can be used to liberate the many different chemical functionalities. This Review describes the controlled chemical release of fragrances and discusses additional challenges such as precursor stability during product storage as well as some aspects concerning toxicity and biodegradability. As the same systems can be applied in different areas of research, the scope of this Review covers fragrance delivery as well as the controlled release of volatiles in general.

Sexual dimorphism of stress response and immune/ inflammatory reaction: the corticotropin releasing hormone perspective

Directory of Open Access Journals (Sweden)

Nicholas V. Vamvakopoulos

1995-01-01

Full Text Available This review higlghts key aspects of corticotropin releasing hormone (CRH biology of potential relevance to the sexual dimorphism of the stress response and immune/inflammatory reaction, and introduces two important new concepts based on the regulatory potential of the human (h CRH gene: (1 a proposed mechanism to account for the tissue-specific antithetical responses of hCRH gene expression to glucocorticolds, that may also explain the frequently observed antithetical effects of chronic glucocorticoid administration in clinical practice and (2 a heuristic diagram to illustrate the proposed modulation of the stress response and immune/ inflammatory reaction by steroid hormones, from the perspective of the CRH system.

Background and derivation of ANS-5.4 standard fission product release model. Technical report

International Nuclear Information System (INIS)

1982-01-01

ANS Working Group 5.4 was established in 1974 to examine fission product releases from UO2 fuel. The scope of ANS-5.4 was narrowly defined to include the following: (1) Review available experimental data on release of volatile fission products from UO2 and mixed-oxide fuel; (2) Survey existing analytical models currently being applied to lightwater reactors; and (3) Develop a standard analytical model for volatile fission product release to the fuel rod void space. Place emphasis on obtaining a model for radioactive fission product releases to be used in assessing radiological consequences of postulated accidents

Review of global environmental-transport models for 3H, 14C, 85Kr, and 129I

International Nuclear Information System (INIS)

Kocher, D.C.; Killough, G.G.

1983-01-01

Global environmental transport models for the long-lived and mobile radionuclides 3 H, 14 C, 85 Kr, and 129 I are reviewed from the perspective of their application to collective dose assessments following releases, e.g., from the nuclear fuel cycle. Contributions to the collective dose commitment from first-pass local and regional exposures are compared. Current global models for 14 C and 85 Kr appear to be satisfactory for dose assessment purposes. Global modeling for 3 H is more difficult than for 14 C and 85 Kr, because of the different physico-chemical forms in which atmospheric releases occur. Global models for 129 I models indicate the primary importance of retention in surface soils for collective doses during the first 10 4 years following atmospheric releases and the importance of long-term transport to ocean sediments for reducing the dose commitment

The influence of source term release parameters on health effects

International Nuclear Information System (INIS)

Jeong, Jong Tae; Ha, Jae Joo

1998-08-01

In this study, the influence of source term release parameters on the health effects was examined. This is very useful in identifying the relative importance of release parameters and can be an important factor in developing a strategy for reducing offsite risks. The release parameters investigated in this study are release height, heat content, fuel burnup, release time, release duration, and warning time. The health effects affected by the change of release parameters are early fatalities, cancer fatalities, early injuries, cancer injuries, early fatality risk, population weighted early fatality risk, population weighted cancer fatality risk, effective whole body population dose, population exceeding an early acute red bone marrow dose of 1.5 Sv, and distance at which early fatalities are expected to occur. As release height increases, the values of early health effects such as early fatalities and injuries decrease. However, the release height dose not have significant influences on late health effects. The values of both early and late health effects decrease as heat content increases. The increase fuel burnup, i.e., the increase of core inventories increases the late health effects, however, has small influence on the early health effects. But, the number of early injuries increases as the fuel burnup increases. The effects of release time increase shows very similar influence on both the early and late health effects. As the release time increases to 2 hours, the values of health effects increase and then decrease rapidly. As release duration increases, the values of late health effects increase slightly, however, the values of early health effects decrease. As warning time increases to 2 hours, the values of late health effects decrease and then shows no variation. The number of early injuries decreases rapidly as the warning time increases to 2 hours. However, the number of early fatalities and the early fatality risk increase as the warning time increases

TNF-α promotes extracellular vesicle release in mouse astrocytes through glutaminase.

Science.gov (United States)

Wang, Kaizhe; Ye, Ling; Lu, Hongfang; Chen, Huili; Zhang, Yanyan; Huang, Yunlong; Zheng, Jialin C

2017-04-20

Extracellular vesicles (EVs) are membrane-contained vesicles shed from cells. EVs contain proteins, lipids, and nucleotides, all of which play important roles in intercellular communication. The release of EVs is known to increase during neuroinflammation. Glutaminase, a mitochondrial enzyme that converts glutamine to glutamate, has been implicated in the biogenesis of EVs. We have previously demonstrated that TNF-α promotes glutaminase expression in neurons. However, the expression and the functionality of glutaminase in astrocytes during neuroinflammation remain unknown. We posit that TNF-α can promote the release of EVs in astrocytes through upregulation of glutaminase expression. Release of EVs, which was demonstrated by electron microscopy, nanoparticle tracking analysis (NTA), and Western Blot, increased in mouse astrocytes when treated with TNF-α. Furthermore, TNF-α treatment significantly upregulated protein levels of glutaminase and increased the production of glutamate, suggesting that glutaminase activity is increased after TNF-α treatment. Interestingly, pretreatment with a glutaminase inhibitor blocked TNF-α-mediated generation of reactive oxygen species in astrocytes, which indicates that glutaminase activity contributes to stress in astrocytes during neuroinflammation. TNF-α-mediated increased release of EVs can be blocked by either the glutaminase inhibitor, antioxidant N-acetyl-L-cysteine, or genetic knockout of glutaminase, suggesting that glutaminase plays an important role in astrocyte EV release during neuroinflammation. These findings suggest that glutaminase is an important metabolic factor controlling EV release from astrocytes during neuroinflammation.

Influence of medical journal press releases on the quality of associated newspaper coverage: retrospective cohort study.

Science.gov (United States)

Schwartz, Lisa M; Woloshin, Steven; Andrews, Alice; Stukel, Therese A

2012-01-27

To determine whether the quality of press releases issued by medical journals can influence the quality of associated newspaper stories. Retrospective cohort study of medical journal press releases and associated news stories. We reviewed consecutive issues (going backwards from January 2009) of five major medical journals (Annals of Internal Medicine, BMJ, Journal of the National Cancer Institute, JAMA, and New England Journal of Medicine) to identify the first 100 original research articles with quantifiable outcomes and that had generated any newspaper coverage (unique stories ≥100 words long). We identified 759 associated newspaper stories using Lexis Nexis and Factiva searches, and 68 journal press releases using Eurekalert and journal website searches. Two independent research assistants assessed the quality of journal articles, press releases, and a stratified random sample of associated newspaper stories (n=343) by using a structured coding scheme for the presence of specific quality measures: basic study facts, quantification of the main result, harms, and limitations. Proportion of newspaper stories with specific quality measures (adjusted for whether the quality measure was present in the journal article's abstract or editor note). We recorded a median of three newspaper stories per journal article (range 1-72). Of 343 stories analysed, 71% reported on articles for which medical journals had issued press releases. 9% of stories quantified the main result with absolute risks when this information was not in the press release, 53% did so when it was in the press release (relative risk 6.0, 95% confidence interval 2.3 to 15.4), and 20% when no press release was issued (2.2, 0.83 to 6.1). 133 (39%) stories reported on research describing beneficial interventions. 24% mentioned harms (or specifically declared no harms) when harms were not mentioned in the press release, 68% when mentioned in the press release (2.8, 1.1 to 7.4), and 36% when no press release

Optimal advanced credit releases in ecosystem service markets.

Science.gov (United States)

BenDor, Todd K; Guo, Tianshu; Yates, Andrew J

2014-03-01

Ecosystem service markets are popular policy tools for ecosystem protection. Advanced credit releases are an important factor affecting the supply side of ecosystem markets. Under an advanced credit release policy, regulators give ecosystem suppliers a fraction of the total ecosystem credits generated by a restoration project before it is verified that the project actually achieves the required ecological thresholds. In spite of their prominent role in ecosystem markets, there is virtually no regulatory or research literature on the proper design of advanced credit release policies. Using U.S. aquatic ecosystem markets as an example, we develop a principal-agent model of the behavior of regulators and wetland/stream mitigation bankers to determine and explore the optimal degree of advance credit release. The model highlights the tension between regulators' desire to induce market participation, while at the same time ensuring that bankers successfully complete ecological restoration. Our findings suggest several simple guidelines for strengthening advanced credit release policy.

ESRS guidelines for software safety reviews. Reference document for the organization and conduct of Engineering Safety Review Services (ESRS) on software important to safety in nuclear power plants

International Nuclear Information System (INIS)

2000-01-01

The IAEA provides safety review services to assist Member States in the application of safety standards and, in particular, to evaluate and facilitate improvements in nuclear power plant safety performance. Complementary to the Operational Safety Review Team (OSART) and the International Regulatory Review Team (IRRT) services are the Engineering Safety Review Services (ESRS), which include reviews of siting, external events and structural safety, design safety, fire safety, ageing management and software safety. Software is of increasing importance to safety in nuclear power plants as the use of computer based equipment and systems, controlled by software, is increasing in new and older plants. Computer based devices are used in both safety related applications (such as process control and monitoring) and safety critical applications (such as reactor protection). Their dependability can only be ensured if a systematic, fully documented and reviewable engineering process is used. The ESRS on software safety are designed to assist a nuclear power plant or a regulatory body of a Member State in the review of documentation relating to the development, application and safety assessment of software embedded in computer based systems important to safety in nuclear power plants. The software safety reviews can be tailored to the specific needs of the requesting organization. Examples of such reviews are: project planning reviews, reviews of specific issues and reviews prior final acceptance. This report gives information on the possible scope of ESRS software safety reviews and guidance on the organization and conduct of the reviews. It is aimed at Member States considering these reviews and IAEA staff and external experts performing the reviews. The ESRS software safety reviews evaluate the degree to which software documents show that the development process and the final product conform to international standards, guidelines and current practices. Recommendations are

Review Papers are Important and Worth Writing

Science.gov (United States)

Reviews are papers that compile, summarize, critique and synthesize the available information on a topic. They are highly represented in Environmental Toxicology and Chemistry’s 100 most cited papers for a good and obvious reason. If you wish to provide citation to support your ...

IOLOGICAL IMPORTANCE AND TOXICITY OF HEAVY METALS FOR BIOTA OF FRESHWATER BODIES (REVIEW)

OpenAIRE

I. Hrytsyniak; N. Kolesnyk

2014-01-01

Purpose. To investigate the sources of scientific information on biological functions of heavy metals (Fe, Zn, Mn, Cu, Ni, Co, Pb, Cd) and their negative effect on biota of fresh water bodies. Findings. A review of works of a variety of scientists showed that the majority of the studied heavy metals (Fe, Zn, Mn, Cum and Co) played an important role in vital functions of freshwater organisms. The significance of other studied heavy metals (Ni, Pb, and Cd) is probable or unknown. Besides bi...

Pharmacokinetics of prolonged-release tacrolimus and implications for use in solid organ transplant recipients.

Science.gov (United States)

Tanzi, Maria G; Undre, Nasrullah; Keirns, James; Fitzsimmons, William E; Brown, Malcolm; First, M Roy

2016-08-01

Prolonged-release tacrolimus was developed as a once-daily formulation with ethylcellulose as the excipient, resulting in slower release and reduction in peak concentration (Cmax ) for a given dose compared with immediate-release tacrolimus, which is administered twice daily. This manuscript reviews pharmacokinetic information on prolonged-release tacrolimus in healthy subjects, in transplant recipients converted from immediate-release tacrolimus, and in de novo kidney and liver transplant recipients. As with the immediate-release formulation, prolonged-release tacrolimus shows a strong correlation between trough concentration (Cmin ) and area under the 24-hour time-concentration curve (AUC24 ), indicating that trough whole blood concentrations provide an accurate measure of drug exposure. We present the pharmacokinetic similarities and differences between the two formulations, so that prescribing physicians will have a better understanding of therapeutic drug monitoring in patients receiving prolonged-release tacrolimus. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

NARCIS (Netherlands)

Jantratid, E; Prakongpan, S; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Barends, D M

2006-01-01

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned

Study of the Release Process of Open Source Software: Case Study

OpenAIRE

Eide, Tor Erik

2007-01-01

This report presents the results of a case study focusing on the release process of open source projects initiated with commercial motives. The purpose of the study is to gain an increased understanding of the release process, how a community can be attracted to the project, and how the interaction with the community evolves in commercial open source initiatives. Data has been gathered from four distinct sources to form the basis of this thesis. A thorough review of the open source literatu...

Research and development of controlled release technology for agrochemicals using isotopes

International Nuclear Information System (INIS)

1986-01-01

In recent years, increasing investment has been made into development of measures to reduce pesticide contamination of food and the environment while at the same time protecting crops and livestock from pest attack. Studies to develop controlled-release technology are frequently carried out with labelled compounds. Radiotracer techniques provide a unique tool in measuring the release rate of the chemical, the stability of the chemical within the formulation and evaluating the effect of environmental factors on the release rate. These technologies and pesticide residue problems were the theme of the Seminar. The Seminar has illustrated the potential value of isotope techniques and has reviewed information on current developments in this field and their relevance to agriculture in developing countries

Sensitivity of the engineered barrier system (EBS) release rate to alternative conceptual models of advective release from waste packages under dripping fractures

International Nuclear Information System (INIS)

Lee, J.H.; Atkins, J.E.; McNeish, J.A.; Vallikat, V.

1996-01-01

Simulations were conducted to analyze the sensitivity of the engineered barrier system (EBS) release rate to alternative conceptual models of the advective release from waste packages under dripping fractures. The first conceptual model assumed that dripping water directly contacts the waste form inside the 'failed' waste package, and radionuclides are released from the EBS by advection. The second conceptual model assumed that dripping water is diverted around the 'failed' waste package (because of the presence of corrosion products plugging the perforations) and dripping water is prevented from directly contacting the waste form. In the second model, radionuclides were assumed to transport through the perforations by diffusion, and, once outside the waste package, to be released from the EBS by advection. The second model was to incorporate more realism into the EBS release calculations. For the case with the second EBS release model, most radionuclides had significantly lower peak EBS release rates (from at least one to several orders of magnitude) than with the first EBS release model. The impacts of the alternative EBS release models were greater for the radionuclides with a low solubility (or solubility-limited radionuclides) than for the radionuclides with a high solubility (or waste form dissolution-limited radionuclides). The analyses indicated that the EBS release model representing advection through a 'failed' waste package (the first EBS release model) may be too conservative in predicting the EBS performance. One major implication from this sensitivity study was that a 'failed' waste package container with multiple perforations may still be able to perform effectively as an important barrier to radionuclide release. (author)

A review of irradiation induced re-solution in oxide fuels

International Nuclear Information System (INIS)

Turnbull, J.A.

1980-01-01

The paper reviews the existing experimental evidence for irradiation induced re-solution and also possible explanations for the mechanism. The importance of re-solution is considered with regard to intragranular bubbles and the accumulation of gas on grain boundaries. It is concluded that re-solution is most effective at low temperatures and could account for the present concern over gas release in high burn-up water reactor fuel assemblies. (author)

Ethnoveterinary importance of herbal galactogogues - a review

Directory of Open Access Journals (Sweden)

I. Mohanty

2014-05-01

Full Text Available Galactogogues elicit pharmacological effects, resulting in increased prolactin concentration through interactions with dopamine receptors and thereby augmenting milk supply. Commercially available synthetic drugs induce adverse effect on the neuro-endocrine axis of lactation physiology. Their prolonged uses have caused toxicity which opens a detrimental platform to normal health status of both human and animals. So the researchers have developed a keen interest in traditional herbs, because these are easily available, cheap and with a hope that they may not leave any toxic residues in milk. Phyto-pharmacological research on natural products can contribute for the discovery of new active compounds with novel structures which may serve as a lead for the development of new galactogogues. Although majority of these herbal preparations have not been evaluated their traditional use suggests that they are safe and effective. The purpose of this review paper was to succinctly review recent progress made in the field of commercially available and tranditional galactogogues.

Human Resource Management in Sports: A Critical Review of its Importance and Pertaining Issues

Directory of Open Access Journals (Sweden)

Weerakoon Ranjan Kumara

2016-03-01

Full Text Available This paper will illustrate the meaning and importance of human resource management (HRM, human resource planning, and strategic human resource management, which are critically important for an organization’s effectiveness and must be effectively managed (Doherty, 1998. This study used the literature review method to acquire its final results. The relevant HRM literature review was done according to the purpose of the study. It used the purposive random sample method for selecting relevant literature. This study shows the current economic environment in the sports industry; the second part of the study critically analyzes the value of the strategic management of employees for the effective and efficient operation of sports organizations. It also critically evaluates human resource planning and other pertinent issues in terms of legislation, recruitment, selection, training, induction, and reward management from different international examples in sports management. Over the past few decades, increasing competition, globalization, and continuous changes in the market and in technology have emphasized the need to rethink the management of the organization and of human resources for the sake of overcoming significant challenges (Taylor et al., 2006. Therefore, managers should use strategic human resource management to overcome significant issues and to form well-planned strategies so that the organization may succeed.

Nanostructured Diclofenac Sodium Releasing Material

Science.gov (United States)

Nikkola, L.; Vapalahti, K.; Harlin, A.; Seppälä, J.; Ashammakhi, N.

2008-02-01

Various techniques have been developed to produce second generation biomaterials for tissue repair. These include extrusion, molding, salt leaching, spinning etc, but success in regenerating tissues has been limited. It is important to develop porous material, yet with a fibrous structure for it to be biomimetic. To mimic biological tissues, the extra-cellular matrix usually contains fibers in nano scale. To produce nanostructures, self-assembly or electrospinning can be used. Adding a drug release function to such a material may advance applications further for use in controlled tissue repair. This turns the resulting device into a multifunctional porous, fibrous structure to support cells and drug releasing properties in order to control tissue reactions. A bioabsorbable poly(ɛ-caprolactone-co-D,L lactide) 95/5 (PCL) was made into diluted solution using a solvent, to which was added 2w-% of diclofenac sodium (DS). Nano-fibers were made by electrospinning onto substrate. Microstructure of the resulting nanomat was studied using SEM and drug release profiles with UV/VIS spectroscopy. Thickness of the electrospun nanomat was about 2 mm. SEM analysis showed that polymeric nano-fibers containing drug particles form a highly interconnected porous nano structure. Average diameter of the nano-fibers was 130 nm. There was a high burst peak in drug release, which decreased to low levels after one day. The used polymer has slow a degradation rate and though the nanomat was highly porous with a large surface area, drug release rate is slow. It is feasible to develop a nano-fibrous porous structure of bioabsorbable polymer, which is loaded with test drug. Drug release is targeted at improving the properties of biomaterial for use in controlled tissue repair and regeneration.

How controlled release technology can aid gene delivery.

Science.gov (United States)

Jo, Jun-Ichiro; Tabata, Yasuhiko

2015-01-01

Many types of gene delivery systems have been developed to enhance the level of gene expression. Controlled release technology is a feasible gene delivery system which enables genes to extend the expression duration by maintaining and releasing them at the injection site in a controlled manner. This technology can reduce the adverse effects by the bolus dose administration and avoid the repeated administration. Biodegradable biomaterials are useful as materials for the controlled release-based gene delivery technology and various biodegradable biomaterials have been developed. Controlled release-based gene delivery plays a critical role in a conventional gene therapy and genetic engineering. In the gene therapy, the therapeutic gene is released from biodegradable biomaterial matrices around the tissue to be treated. On the other hand, the intracellular controlled release of gene from the sub-micro-sized matrices is required for genetic engineering. Genetic engineering is feasible for cell transplantation as well as research of stem cells biology and medicine. DNA hydrogel containing a sequence of therapeutic gene and the exosome including the individual specific nucleic acids may become candidates for controlled release carriers. Technologies to deliver genes to cell aggregates will play an important role in the promotion of regenerative research and therapy.

The importance and impact of patients' health literacy on low back pain management: a systematic review of literature.

Science.gov (United States)

Edward, Jean; Carreon, Leah Yacat; Williams, Mark V; Glassman, Steven; Li, Jing

2018-02-01

Health literacy (HL) and the overall ability of patients to seek, understand, and apply health information play an important role in the management of chronic pain conditions. Awareness of how patients' HL skills influence their pain experience and how their ability to understand the treatment regimen and to manage chronic pain may allow physicians to adjust clinical treatment accordingly. Despite the prevalence and the substantial economic impact of chronic low back pain (LBP), little is known about the relationship between HL and the treatment and management of this common disease entity. The purpose of this systematic review of published research was to examine the importance and the implications of HL in the treatment and management of LBP. A literature search was performed in Web of Science, PubMed, Cumulative Index to Nursing and Allied Health Literature, and PsychInfo using medical subject heading (MeSH) terms related to LBP, HL, and patient education, which yielded only three studies that directly addressed HL among patients suffering from LBP. We identified only a limited number of studies that focused specifically on HL in the LBP population that were included in this review. The majority of studies excluded from this review focused on patient levels of educational attainment and patient education programs without addressing patients' HL levels and their impact on adherence to educational programs, self-care management, and rehabilitation, among other factors. The three studies that are critically reviewed in this review either use a direct measure of HL or make an effort to address HL in their programs. All three studies emphasize the importance of considering the HL of patients in the treatment and management of LBP. Building on these studies and the narrative review of other relevant literature, we identified significant gaps in current research addressing HL in the treatment and management of LBP. We developed recommendations for future research based

The release code package REVOLS/RENONS for fission product release from a liquid sodium pool into an inert gas atmosphere

International Nuclear Information System (INIS)

Starflinger, J.; Scholtyssek, W.; Unger, H.

1994-12-01

For aerosol source term considerations in the field of nuclear safety, the investigation of the release of volatile and non-volatile species from liquid surfaces into a gas atmosphere is important. In case of a hypothetical liquid metal fast breeder reactor accident with tank failure, primary coolant sodium with suspended or solved fuel particles and fission products may be released into the containment. The computer code package REVOLS/RENONS, based on a theoretical mechanistic model with a modular structure, has been developed for the prediction of sodium release as well as volatile and non-volatile radionuclide release from a liquid pool surface into the inert gas atmosphere of the inner containment. Hereby the release of sodium and volatile fission products, like cesium and sodium iodide, is calculated using a theoretical model in a mass transfer coefficient formulation. This model has been transposed into the code version REVOLS.MOD1.1, which is discussed here. It enables parameter analysis under highly variable user-defined boundary conditions. Whereas the evaporative release of the volatile components is governed by diffusive and convective transport processes, the release of the non-volatile ones may be governed by mechanical processes which lead to droplet entrainment from the wavy pool surface under conditions of natural or forced convection into the atmosphere. The mechanistic model calculates the liquid entrainment rate of the non-volatile species, like the fission product strontium oxide and the fuel (uranium dioxide) from a liquid pool surface into a parallel gas flow. The mechanistic model has been transposed into the computer code package REVOLS/RENONS, which is discussed here. Hereby the module REVOLS (RElease of VOLatile Species) calculates the evaporative release of the volatile species, while the module RENONS (RElease of NON-Volatile Species) computes the entrainment release of the non-volatile radionuclides. (orig./HP) [de

The 30-year evolution of airway pressure release ventilation (APRV).

Science.gov (United States)

Jain, Sumeet V; Kollisch-Singule, Michaela; Sadowitz, Benjamin; Dombert, Luke; Satalin, Josh; Andrews, Penny; Gatto, Louis A; Nieman, Gary F; Habashi, Nader M

2016-12-01

Airway pressure release ventilation (APRV) was first described in 1987 and defined as continuous positive airway pressure (CPAP) with a brief release while allowing the patient to spontaneously breathe throughout the respiratory cycle. The current understanding of the optimal strategy to minimize ventilator-induced lung injury is to "open the lung and keep it open". APRV should be ideal for this strategy with the prolonged CPAP duration recruiting the lung and the minimal release duration preventing lung collapse. However, APRV is inconsistently defined with significant variation in the settings used in experimental studies and in clinical practice. The goal of this review was to analyze the published literature and determine APRV efficacy as a lung-protective strategy. We reviewed all original articles in which the authors stated that APRV was used. The primary analysis was to correlate APRV settings with physiologic and clinical outcomes. Results showed that there was tremendous variation in settings that were all defined as APRV, particularly CPAP and release phase duration and the parameters used to guide these settings. Thus, it was impossible to assess efficacy of a single strategy since almost none of the APRV settings were identical. Therefore, we divided all APRV studies divided into two basic categories: (1) fixed-setting APRV (F-APRV) in which the release phase is set and left constant; and (2) personalized-APRV (P-APRV) in which the release phase is set based on changes in lung mechanics using the slope of the expiratory flow curve. Results showed that in no study was there a statistically significant worse outcome with APRV, regardless of the settings (F-ARPV or P-APRV). Multiple studies demonstrated that P-APRV stabilizes alveoli and reduces the incidence of acute respiratory distress syndrome (ARDS) in clinically relevant animal models and in trauma patients. In conclusion, over the 30 years since the mode's inception there have been no strict

Ectopic corticotropin-releasing hormone (CRH syndrome from metastatic small cell carcinoma: a case report and review of the literature

Directory of Open Access Journals (Sweden)

Shahani Sadeka

2010-08-01

Full Text Available Abstract Background Cushing's Syndrome (CS which is caused by isolated Corticotropin-releasing hormone (CRH production, rather than adrenocorticotropin (ACTH production, is extremely rare. Methods We describe the clinical presentation, course, laboratory values and pathologic findings of a patient with isolated ectopic CRH causing CS. We review the literature of the types of tumors associated with this unusual syndrome and the behavior of these tumors by endocrine testing. Results A 56 year old woman presented with clinical and laboratory features consistent with ACTH-dependent CS. Pituitary imaging was normal and cortisol did not suppress with a high dose dexamethasone test, consistent with a diagnosis of ectopic ACTH. CT imaging did not reveal any discrete lung lesions but there were mediastinal and abdominal lymphadenopathy and multiple liver lesions suspicious for metastatic disease. Laboratory testing was positive for elevated serum carcinoembryonic antigen and the neuroendocrine marker chromogranin A. Serum markers of carcinoid, medullary thyroid carcinoma, and pheochromocytoma were in the normal range. Because the primary tumor could not be identified by imaging, biopsy of the presumed metastatic liver lesions was performed. Immunohistochemistry was consistent with a neuroendocrine tumor, specifically small cell carcinoma. Immunostaining for ACTH was negative but was strongly positive for CRH and laboratory testing revealed a plasma CRH of 10 pg/ml (normal 0 to 10 pg/ml which should have been suppressed in the presence of high cortisol. Conclusions This case illustrates the importance of considering the ectopic production of CRH in the differential diagnosis for presentations of ACTH-dependent Cushing's Syndrome.

Pollutant Release and Transfer Register

International Nuclear Information System (INIS)

2008-01-01

Since 1974 a number of organisations have been working closely together in this pollutant register (PRTR) project to collect and formally establish the yearly releases of pollutants to air, water and soil in the Netherlands. Results of this project serve to underpin the national environmental policy. Data is in this way also provided for the many environmental reports to international organisations such as the European Union and the United Nations, e.g. the National Inventory Report for the Kyoto Protocol. This website shows the yearly releases (emissions) of the most important pollutants in the Netherlands. You can explore the emission data through various channels, such as maps, graphs and tables. But you can also download all the details into your own database. The data shown in this website is updated 2 to 3 times a year. The current release shows emissions for 1990, 1995, 2000, 2004, 2005 and 2006 The 2006 emissions are preliminary data and not yet shown in the maps. We expect to add an extra year in August 2008 [nl

Heat release rate from the combustion of uranium

International Nuclear Information System (INIS)

Solbrig, C.W.

1995-01-01

Fuel treatment is planned at the Argonne National Laboratory on EBR-II spent fuel. The electrochemical treatment process is carried out in a cell with an argon atmosphere to prevent any reaction. The amount of fuel processed at any time is limited by the amount of energy which could be released by metal combustion if air is inadvertently allowed into the cell since the heat release would increase the cell pressure. The cell pressure is required to be below atmospheric even if combustion occurs to ensure no cell gas/aerosol is released to the environment. Metal fires can release large amounts of heat. In certain configurations such as fine particulate, metal can be pyrophoric at room temperature. When the metal is a nuclear fuel, it is important to be able to predict the reaction/heat release rate if the metal is inadvertently exposed to air. A realistic combustion model is needed to predict heat release rates for the many different flow and transport configurations which exist in the various fuel processing steps. A model for the combustion of uranium is developed here which compares satisfactorily to experimental data

An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

NARCIS (Netherlands)

Trijssenaar-Buhre, I.J.M.; Sterkenburg, R.P.; Wijnant-Timmerman, S.I.

2009-01-01

Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

An advanced model for spreading and evaporation of accidentally released hazardous liquids on land

NARCIS (Netherlands)

Trijssenaar-Buhre, I.J.M.; Wijnant-Timmerman, S.L.

2008-01-01

Pool evaporation modelling is an important element in consequence assessment of accidentally released hazardous liquids. The evaporation rate determines the amount of toxic or flammable gas released into the atmosphere and is an important factor for the size of a pool fire. In this paper a

Imported and autochthonous leprosy presenting in Madrid (1989-2015): A case series and review of the literature.

Science.gov (United States)

Norman, Francesca F; Fanciulli, Chiara; Pérez-Molina, José-Antonio; Monge-Maillo, Begoña; López-Vélez, Rogelio

2016-01-01

Leprosy remains infrequent in non-endemic areas. The objective of this study was to describe the cases of leprosy reviewed at a referral unit for imported diseases in Europe and to compare these findings with published data on imported leprosy. Cases of leprosy evaluated at a referral centre are described and salient features of autochthonous and imported cases are compared. A review of the literature on imported leprosy was performed. During the study period, 25 patients with leprosy were followed-up (10 were autochthonous cases and 15 were considered to be imported). Regarding imported cases, the majority were diagnosed in Latin American immigrants (10/15, 67%), mean age was 42 years, there were no differences in gender distribution, estimated average time from arrival in Spain to first visit at the unit was 3 years and from symptom onset to diagnosis was 2 years. Over 80% of imported cases had multibacillary disease and over one third of patients had been previously diagnosed with leprosy. One third had received alternate incorrect diagnoses initially, leprosy completed standard therapy and were considered cured and over one third were lost to follow-up. Leprosy remains a complex disease for healthcare professionals unfamiliar with this infection. Manifestations are polymorphic so misdiagnoses and consequent delays in diagnosis are not infrequent and may lead to resulting disabilities. Early diagnosis and management are essential to prevent sequelae and possible transmission. Improving access to health care, especially for vulnerable groups, would be necessary to advance in the control of this disease. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development, description and validation of a Tritium Environmental Release Model (TERM).

Science.gov (United States)

Jeffers, Rebecca S; Parker, Geoffrey T

2014-01-01

Tritium is a radioisotope of hydrogen that exists naturally in the environment and may also be released through anthropogenic activities. It bonds readily with hydrogen and oxygen atoms to form tritiated water, which then cycles through the hydrosphere. This paper seeks to model the migration of tritiated species throughout the environment - including atmospheric, river and coastal systems - more comprehensively and more consistently across release scenarios than is currently in the literature. A review of the features and underlying conceptual models of some existing tritium release models was conducted, and an underlying aggregated conceptual process model defined, which is presented. The new model, dubbed 'Tritium Environmental Release Model' (TERM), was then tested against multiple validation sets from literature, including experimental data and reference tests for tritium models. TERM has been shown to be capable of providing reasonable results which are broadly comparable with atmospheric HTO release models from the literature, spanning both continuous and discrete release conditions. TERM also performed well when compared with atmospheric data. TERM is believed to be a useful tool for examining discrete and continuous atmospheric releases or combinations thereof. TERM also includes further capabilities (e.g. river and coastal release scenarios) that may be applicable to certain scenarios that atmospheric models alone may not handle well. Copyright © 2013 Elsevier Ltd. All rights reserved.

Correlation of recent fission product release data

International Nuclear Information System (INIS)

Kress, T.S.; Lorenz, R.A.; Nakamura, T.; Osborne, M.F.

1989-01-01

For the calculation of source terms associated with severe accidents, it is necessary to model the release of fission products from fuel as it heats and melts. Perhaps the most definitive model for fission product release is that of the FASTGRASS computer code developed at Argonne National Laboratory. There is persuasive evidence that these processes, as well as additional chemical and gas phase mass transport processes, are important in the release of fission products from fuel. Nevertheless, it has been found convenient to have simplified fission product release correlations that may not be as definitive as models like FASTGRASS but which attempt in some simple way to capture the essence of the mechanisms. One of the most widely used such correlation is called CORSOR-M which is the present fission product/aerosol release model used in the NRC Source Term Code Package. CORSOR has been criticized as having too much uncertainty in the calculated releases and as not accurately reproducing some experimental data. It is currently believed that these discrepancies between CORSOR and the more recent data have resulted because of the better time resolution of the more recent data compared to the data base that went into the CORSOR correlation. This document discusses a simple correlational model for use in connection with NUREG risk uncertainty exercises. 8 refs., 4 figs., 1 tab

Influence of factors on release of antimicrobials from antimicrobial packaging materials.

Science.gov (United States)

Wu, Yu-Mei; Wang, Zhi-Wei; Hu, Chang-Ying; Nerín, Cristina

2018-05-03

Antimicrobial packaging materials (films or coatings) (APMs) have aroused great interest among the scientists or the experts specialized in material science, food science, packaging engineering, biology and chemistry. APMs have been used to package the food, such as dairy products, poultry, meat (e.g., beef), salmon muscle, pastry dough, fresh pasta, bakery products, fruits, vegetables and beverages. Some materials have been already commercialized. The ability of APMs to extend the shelf-life of the food depends on the release rate of the antimicrobials (AMs) from the materials to the food. The optimum rate is defined as target release rate (TRR). To achieve TRR, the influencing factors of the release rate should be considered. Herein we reviewed for the first time these factors and their influence on the release. These factors mainly include the AMs, food (or food simulant), packaging materials, the interactions among them, the temperature and environmental relative humidity (RH).

Mediastinoscopic Bilateral Bronchial Release for Long Segmental Resection and Anastomosis of the Trachea

OpenAIRE

Kang, Jeong-Han; Park, In Kyu; Bae, Mi-Kyung; Hwang, Yoohwa

2011-01-01

The extent of resection and release of the trachea is important for successful anastomosis. Bilateral bronchial dissection is one of the release techniques for resection of the lower trachea. We present the experience of cervical video-assisted mediastinoscopic bilateral bronchial release for long segmental resection and anastomosis of the lower trachea.

Atmospheric Release Advisory Capability

International Nuclear Information System (INIS)

Dickerson, M.H.; Gudiksen, P.H.; Sullivan, T.J.

1983-02-01

The Atmospheric Release Advisory Capability (ARAC) project is a Department of Energy (DOE) sponsored real-time emergency response service available for use by both federal and state agencies in case of a potential or actual atmospheric release of nuclear material. The project, initiated in 1972, is currently evolving from the research and development phase to full operation. Plans are underway to expand the existing capability to continuous operation by 1984 and to establish a National ARAC Center (NARAC) by 1988. This report describes the ARAC system, its utilization during the past two years, and plans for its expansion during the next five to six years. An integral part of this expansion is due to a very important and crucial effort sponsored by the Defense Nuclear Agency to extend the ARAC service to approximately 45 Department of Defense (DOD) sites throughout the continental US over the next three years

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

NARCIS (Netherlands)

Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D I R K W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

2018-01-01

Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To clarify the Biopharmaceutics Classification System (BCS) classification, experimental solubility and

Quantification of nanoparticle release from polymer nanocomposite coatings due to environmental stressing.

Science.gov (United States)

Kim, Yeon Seok; Davis, Rick; Uddin, Nasir; Nyden, Marc; Rabb, Savelas A

2016-01-01

Certain engineered nanoparticles (ENP) reduce the flammability of components used in soft furnishings (mattresses and upholstered furniture). However, because of the ENP's small size and ability to interact with biological molecules, these fire retardant ENPs may pose a health and environmental risks, if they are released sometime during the life cycle of the soft furnishing. Quantifying the released amount of these ENPs under normal end-use circumstances provides a basis for assessing their potential health and environmental impact. In this article, we report on efforts to identify suitable methodologies for quantifying the release of carbon nanofibers, carbon nanotubes, and sodium montmorillonites from coatings applied to the surfaces of barrier fabric and polyurethane foam. The ENPs released in simulated chewing and mechanical stressing experiments were collected in aqueous solution and quantified using Ultraviolet-Visible and inductively coupled plasma-optical emission spectroscopy. The microstructures of the released ENPs were characterized using scanning electron microscopy. The reported methodology and results provide important milestones to estimate the impact and toxicity of the ENP release during the life cycle of the nanocomposites. To our knowledge, this is the first study of ENP release from the soft furnishing coating, something that can be important application area for fire safety.

Algorithmic complexity of growth hormone release in humans

Energy Technology Data Exchange (ETDEWEB)

Prank, K.; Wagner, M.; Brabant, G. [Medical School Hannover (Germany)

1996-12-31

Most hormones are secreted in an pulsatile rather than in a constant manner. This temporal pattern of pulsatile hormone release plays an important role in the regulation of cellular function and structure. In healthy humans growth hormone (GH) secretion is characterized by distinct pulses whereas patients bearing a GH producing tumor accompanied with excessive secretion (acromegaly) exhibit a highly irregular pattern of GH release. It has been hypothesized that this highly disorderly pattern of GH release in acromegaly arises from random events in the GH-producing tumor under decreased normal control of GH secretion. Using a context-free grammar complexity measure (algorithmic complexity) in conjunction with random surrogate data sets we demonstrate that the temporal pattern of GH release in acromegaly is not significantly different from a variety of stochastic processes. In contrast, normal subjects clearly exhibit deterministic structure in their temporal patterns of GH secretion. Our results support the hypothesis that GH release in acromegaly is due to random events in the GH-producing tumorous cells which might become independent from hypothalamic regulation. 17 refs., 1 fig., 2 tabs.

A Review of the Importance of Maternal-fetal Attachment According to the Islamic Recommendations

Directory of Open Access Journals (Sweden)

Fatemeh Ghodrati

2018-01-01

Full Text Available Background & aim: Maternal-fetal attachment has an important effect on mother's identity as well as maternal and fetal health. Moreover, this concept is considered as a crucial issue for the improvement of children emotional development. Regarding the Islamic recommendations on maternal-fetal attachment and its correlation with maternal affection, this study was conducted to review the importance of maternal-fetal attachment according to the Islamic recommendations. Methods: This review was conducted on the religious texts, which covered the subject of interest and were published within 2000-2017. Various databases including Medline, PubMed, Google, IranMedex, SID, and Magiran as well as the websites of Muslim authorities (i.e., the section responding to religious questions were searched. The searching was carried out using keywords as: “Islamic religious teachings”, “pregnant women and Fatwa of the Islamic jurists”, and “aspects of maternal fetal attachment in Islam”. Results: According to the results of the reviewed texts, the mutual readiness of mother and fetus leads to the improvement of their affection. The maternal factors affecting the maternal-neonatal attachment included personality traits, marriage, selection of partner, post-marriage issues, pregnancy, as well as physical and psychological characteristics. There were also some effective factors on the newborn’s innate readiness for the development of attachment, such as fetal appearance, family and social support, maternal nutrition during pregnancy, and neonatal mood. Conclusion: According to the Holy Quran versus and hadiths, maternal-fetal attachment and its promotion are affected by both maternal and fetal factors. Moreover, following the factors affecting attachment will lead to their role functioning. Therefore, it is intensively recommended to incorporate a glance of Islamic instruction into the pregnancy education to improve the maternal-fetal attachment.

Research Review: The Importance of Callous-Unemotional Traits for Developmental Models of Aggressive and Antisocial Behavior

Science.gov (United States)

Frick, Paul J.; White, Stuart F.

2008-01-01

The current paper reviews research suggesting that the presence of a callous and unemotional interpersonal style designates an important subgroup of antisocial and aggressive youth. Specifically, callous-unemotional (CU) traits (e.g., lack of guilt, absence of empathy, callous use of others) seem to be relatively stable across childhood and…

Regulation of gonadotropin-releasing hormone neurons by glucose

Science.gov (United States)

Roland, Alison V.; Moenter, Suzanne M.

2011-01-01

Reproduction is influenced by energy balance, but the physiological pathways mediating their relationship have not been fully elucidated. As the central regulators of fertility, gonadotropin-releasing hormone (GnRH) neurons integrate numerous physiological signals, including metabolic cues. Circulating glucose levels regulate GnRH release and may in part mediate the effects of negative energy balance on fertility. Existing evidence suggests that neural pathways originating in the hindbrain, as well as in the hypothalamic feeding nuclei, transmit information concerning glucose availability to GnRH neurons. Here we review recent evidence suggesting that GnRH neurons may directly sense changes in glucose availability by a mechanism involving adenosine monophosphate-activated protein kinase (AMPK). These findings expand our understanding of how metabolic signaling in the brain regulates reproduction. PMID:21855365

[Ammonia-oxidizing archaea and their important roles in nitrogen biogeochemical cycling: a review].

Science.gov (United States)

Liu, Jing-Jing; Wu, Wei-Xiang; Ding, Ying; Shi, De-Zhi; Chen, Ying-Xu

2010-08-01

As the first step of nitrification, ammonia oxidation is the key process in global nitrogen biogeochemical cycling. So far, the autotrophic ammonia-oxidizing bacteria (AOB) in the beta- and gamma-subgroups of proteobacteria have been considered as the most important contributors to ammonia oxidation, but the recent researches indicated that ammonia-oxidizing archaea (AOA) are widely distributed in various kinds of ecosystems and quantitatively predominant, playing important roles in the global nitrogen biogeochemical cycling. This paper reviewed the morphological, physiological, and ecological characteristics and the molecular phylogenies of AOA, and compared and analyzed the differences and similarities of the ammonia monooxygenase (AMO) and its encoding genes between AOA and AOB. In addition, the potential significant roles of AOA in nitrogen biogeochemical cycling in aquatic and terrestrial ecosystems were summarized, and the future research directions of AOA in applied ecology and environmental protection were put forward.

The area postrema (AP) and the parabrachial nucleus (PBN) are important sites for salmon calcitonin (sCT) to decrease evoked phasic dopamine release in the nucleus accumbens (NAc).

Science.gov (United States)

Whiting, Lynda; McCutcheon, James E; Boyle, Christina N; Roitman, Mitchell F; Lutz, Thomas A

2017-07-01

The pancreatic hormone amylin and its agonist salmon calcitonin (sCT) act via the area postrema (AP) and the lateral parabrachial nucleus (PBN) to reduce food intake. Investigations of amylin and sCT signaling in the ventral tegmental area (VTA) and nucleus accumbens (NAc) suggest that the eating inhibitory effect of amylin is, in part, mediated through the mesolimbic 'reward' pathway. Indeed, administration of the sCT directly to the VTA decreased phasic dopamine release (DA) in the NAc. However, it is not known if peripheral amylin modulates the mesolimbic system directly or whether this occurs via the AP and PBN. To determine whether and how peripheral amylin or sCT affect mesolimbic reward circuitry we utilized fast scan cyclic voltammetry under anesthesia to measure phasic DA release in the NAc evoked by electrical stimulation of the VTA in intact, AP lesioned and bilaterally PBN lesioned rats. Amylin (50μg/kg i.p.) did not change phasic DA responses compared to saline control rats. However, sCT (50μg/kg i.p.) decreased evoked DA release to VTA-stimulation over 1h compared to saline treated control rats. Further investigations determined that AP and bilateral PBN lesions abolished the ability of sCT to suppress evoked phasic DA responses to VTA-stimulation. These findings implicate the AP and the PBN as important sites for peripheral sCT to decrease evoked DA release in the NAc and suggest that these nuclei may influence hedonic and motivational processes to modulate food intake. Copyright © 2017 Elsevier Inc. All rights reserved.

Important considerations related to the construction of observation wells in radiation facilities sites: A review research

International Nuclear Information System (INIS)

El-Sayed, S. A.; Salem, W. M.; Atta, E. R.

2012-01-01

Observation wells in radiation facility sites are considered the main sources of the required subsurface geologic and hydrogeologic data. They are the most important means to detect the radioactive and/or chemical contaminants within the ground water. Also, they are used to observe the groundwater level fluctuations and perform the different aquifer tests to understand the hydraulic properties of aquifers and the behavior of contaminants transportation. This research reviews the necessary considerations and available techniques for constructing the observation wells properly. The review process depends on the international guidelines presented in the literature and the field experience. The proper well completion is essential for the well efficiency and longevity. Three main important topics are considered and discussed briefly in this review. They are the preliminary considerations, the drilling program and the well protection procedures. The preliminary considerations included are the collection of the available geologic and hydrogeologic data and information, selection of drilling method and the legal requirements. The drilling program comprises the site preparation, drilling processes, sampling, well logging, well design, casing components and materials, gravel pack and well development. The well protection procedures include well grout, concrete slab and others requirements. Observation wells should be constructed to a high standard and should be properly maintained and protected to ensure ongoing and reliable data collection

A Review of Eight High-Priority, Economically Important Viral Pathogens of Poultry within the Caribbean Region

Science.gov (United States)

Gongora, Victor; Hartley, Dane; Oura, Christopher

2018-01-01

Viral pathogens cause devastating economic losses in poultry industries worldwide. The Caribbean region, which boasts some of the highest rates of poultry consumption in the world, is no exception. This review summarizes evidence for the circulation and spread of eight high-priority, economically important poultry viruses across the Caribbean region. Avian influenza virus (AIV), infectious bronchitis virus (IBV), Newcastle disease virus (NDV), infectious laryngotracheitis virus (ILTV), avian metapneumovirus (aMPV), infectious bursal disease virus (IBDV), fowl adenovirus group 1 (FADV Gp1), and egg drop syndrome virus (EDSV) were selected for review. This review of serological, molecular, and phylogenetic studies across Caribbean countries reveals evidence for sporadic outbreaks of respiratory disease caused by notifiable viral pathogens (AIV, IBV, NDV, and ILTV), as well as outbreaks of diseases caused by immunosuppressive viral pathogens (IBDV and FADV Gp1). This review highlights the need to strengthen current levels of surveillance and reporting for poultry diseases in domestic and wild bird populations across the Caribbean, as well as the need to strengthen the diagnostic capacity and capability of Caribbean national veterinary diagnostic laboratories. PMID:29373488

A Review of Eight High-Priority, Economically Important Viral Pathogens of Poultry within the Caribbean Region

Directory of Open Access Journals (Sweden)

Arianne Brown Jordan

2018-01-01

Full Text Available Viral pathogens cause devastating economic losses in poultry industries worldwide. The Caribbean region, which boasts some of the highest rates of poultry consumption in the world, is no exception. This review summarizes evidence for the circulation and spread of eight high-priority, economically important poultry viruses across the Caribbean region. Avian influenza virus (AIV, infectious bronchitis virus (IBV, Newcastle disease virus (NDV, infectious laryngotracheitis virus (ILTV, avian metapneumovirus (aMPV, infectious bursal disease virus (IBDV, fowl adenovirus group 1 (FADV Gp1, and egg drop syndrome virus (EDSV were selected for review. This review of serological, molecular, and phylogenetic studies across Caribbean countries reveals evidence for sporadic outbreaks of respiratory disease caused by notifiable viral pathogens (AIV, IBV, NDV, and ILTV, as well as outbreaks of diseases caused by immunosuppressive viral pathogens (IBDV and FADV Gp1. This review highlights the need to strengthen current levels of surveillance and reporting for poultry diseases in domestic and wild bird populations across the Caribbean, as well as the need to strengthen the diagnostic capacity and capability of Caribbean national veterinary diagnostic laboratories.

Formaldehyde-releasers: relationship to formaldehyde contact allergy. Contact allergy to formaldehyde and inventory of formaldehyde-releasers

DEFF Research Database (Denmark)

de Groot, Anton C; Flyvholm, Mari-Ann; Lensen, Gerda

2009-01-01

in the literature as formaldehyde-releasers, data are inadequate to consider them as such beyond doubt. Several (nomenclature) mistakes and outdated information are discussed. Formaldehyde and formaldehyde allergy are reviewed: applications, exposure scenarios, legislation, patch testing problems, frequency....... The frequency of contact allergy to formaldehyde is consistently higher in the USA (8-9%) than in Europe (2-3%). Patch testing with formaldehyde is problematic; the currently used 1% solution may result in both false-positive and false-negative (up to 40%) reactions. Determining the relevance of patch test...

Import and Export of Misfolded α-Synuclein

Directory of Open Access Journals (Sweden)

Lilia Rodriguez

2018-05-01

Full Text Available In Parkinson's disease, intracellular α-synuclein (α-syn inclusions form in neurons and are referred to as Lewy bodies. These aggregates spread through the brain following a specific pattern leading to the hypothesis that neuron-to-neuron transfer is critical for the propagation of Lewy body pathology. Here we review recent studies employing pre-formed fibrils generated from recombinant α-syn to evaluate the uptake, trafficking, and release of α-syn fibrils. We outline methods of internalization as well as cell surface receptors that have been described in the literature as regulating α-syn fibril uptake. Pharmacological and genetic studies indicate endocytosis is the primary method of α-syn internalization. Once α-syn fibrils have crossed the plasma membrane they are typically trafficked through the endo-lysosomal system with autophagy acting as the dominant method of α-syn clearance. Interestingly, both chaperone-mediated autophagy and macroautophagy have been implicated in the degradation of α-syn, although it remains unclear which system is chiefly responsible for the removal of α-syn fibrils. The major hallmark of α-syn spreading is the templating of misfolded properties onto healthy protein resulting in a conformational change; we summarize the evidence indicating misfolded α-syn can seed endogenous α-syn to form new aggregates. Finally, recent studies demonstrate that cells release misfolded and aggregated α-syn and that these processes may involve different chaperones. Nonetheless, the exact mechanism for the release of fibrillar α-syn remains unclear. This review highlights what is known, and what requires further clarification, regarding each step of α-syn transmission.

Bcl-2 and Bcl-xL overexpression inhibits cytochrome c release, activation of multiple caspases, and virus release following coxsackievirus B3 infection

International Nuclear Information System (INIS)

Carthy, Christopher M.; Yanagawa, Bobby; Luo Honglin; Granville, David J.; Yang, Decheng; Cheung, Paul; Cheung, Caroline; Esfandiarei, Mitra; Rudin, Charles M.; Thompson, Craig B.; Hunt, David W.C.; McManus, Bruce M.

2003-01-01

Coxsackievirus B3, a cytopathic virus in the family Picornaviridae, induces degenerative changes in host cell morphology. Here we demonstrate cytochrome c release and caspases-2, -3, -6, -7, -8, and -9 processing. Enforced Bcl-2 and Bcl-xL expression markedly reduced release of cytochrome c, presentation of the mitochondrial epitope 7A6, and depressed caspase activation following infection. In comparison, cell death using TRAIL ligand caused caspase-8 processing prior to cytochrome c release and executioner caspases and cell death was only partially rescued by Bcl-2 and Bcl-xL overexpression. Disruption of the mitochondrial inner membrane potential following CVB3 infection was not inhibited by zVAD.fmk treatment. Bcl-2 or Bcl-xL overexpression or zVAD.fmk treatment delayed the loss of host cell viability and decreased progeny virus release following infection. Our data suggest that mitochondrial release of cytochrome c may be an important early event in caspase activation in CVB3 infection, and, as such, may contribute to the loss of host-cell viability and progeny virus release

PEAR code review

International Nuclear Information System (INIS)

De Wit, R.; Jamieson, T.; Lord, M.; Lafortune, J.F.

1997-07-01

As a necessary component in the continuous improvement and refinement of methodologies employed in the nuclear industry, regulatory agencies need to periodically evaluate these processes to improve confidence in results and ensure appropriate levels of safety are being achieved. The independent and objective review of industry-standard computer codes forms an essential part of this program. To this end, this work undertakes an in-depth review of the computer code PEAR (Public Exposures from Accidental Releases), developed by Atomic Energy of Canada Limited (AECL) to assess accidental releases from CANDU reactors. PEAR is based largely on the models contained in the Canadian Standards Association (CSA) N288.2-M91. This report presents the results of a detailed technical review of the PEAR code to identify any variations from the CSA standard and other supporting documentation, verify the source code, assess the quality of numerical models and results, and identify general strengths and weaknesses of the code. The version of the code employed in this review is the one which AECL intends to use for CANDU 9 safety analyses. (author)

Evaluation of the dose assessment models for routine radioactive releases to the environment

International Nuclear Information System (INIS)

Rossi, J.

1998-05-01

The aim of the work was to evaluate the needs of development concerning the dose calculation models for routine releases and application of the models for exceptional release situations at the NPP plants operated by Imatran Voima Ltd. and Teollisuuden Voima Ltd. in Finland. First, the differences of the calculation models concerning input data, models themselves and output are considered. Subsequently some single features like importance of nuclides in exposure pathways due to change of the release composition, dose calculation for children and importance of time period of particle releases are considered. The existing dose calculation model used by the radiation safety authorities is aimed at a tool for checking the results from calculations of doses arising from routine releases by the power companies. Characteristics of an independent, foreign model and its suitability for safety authorities for dose calculations of releases in normal operation is also assessed. The needs of improvements in the existing calculation models and characteristics of a comprehensive model for safety authorities are discussed as well

Soluble NKG2D ligands: prevalence, release, and functional impact.

Science.gov (United States)

Salih, Helmut Rainer; Holdenrieder, Stefan; Steinle, Alexander

2008-05-01

Natural Killer (NK) cells are capable to recognize and eliminate malignant cells. Anti-tumor responses of NK cells are promoted by the tumor-associated expression of cell stress-inducible ligands of the activating NK receptor NKG2D. Current evidence suggests that established tumors subvert NKG2D-mediated tumor immunosurveillance by releasing NKG2D ligands (NKG2DL). Release of NKG2DL has been observed in a broad variety of human tumor entities and is thought to interfere with NKG2D-mediated tumor immunity in several ways. Further, levels of soluble NKG2DL (sNKG2DL) were also found to be elevated under various non-malignant conditions, although the functional implications remain largely unclear. Here we review and discuss the available data on the prevalence, release, functional impact, and potential clinical value of sNKG2DL.

Measurements of the Shock Release Of Quartz and Paralyene-N

Science.gov (United States)

Hawreliak, James; Karasik, Max; Oh, Jaechul; Aglitskiy, Yefim

2017-06-01

The shock and release properties of Quartz and hydrocarbons are important to high energy density (HED) research and inertial confinement fusion (ICF) science. The bulk of HED material research studies single shock or multiple shock conditions. The challenge with measuring release properties is unlike shocks which have a single interface from which to measure the properties, the release establishes gradients in the sample. The streaked x-ray imaging capability of the NIKE laser allow the interface between quartz and CH to be measured during the release, giving measurements of the interface velocity and CH density. Here, we present experimental results from the NIKE laser where quartz and parylene-N are shock compressed to high pressure and temperature and the release state is measured through x-ray imaging. The shock state is characterized by shock front velocity measurements using VISAR and the release state is characterized by using side-on streaked x-ray radiography Work supported by DOE/NNSA.

Impact of Molecular Diagnostics for Tuberculosis on Patient-Important Outcomes: A Systematic Review of Study Methodologies.

Directory of Open Access Journals (Sweden)

Samuel G Schumacher

Full Text Available Several reviews on the accuracy of Tuberculosis (TB Nucleic Acid Amplification Tests (NAATs have been performed but the evidence on their impact on patient-important outcomes has not been systematically reviewed. Given the recent increase in research evaluating such outcomes and the growing list of TB NAATs that will reach the market over the coming years, there is a need to bring together the existing evidence on impact, rather than accuracy. We aimed to assess the approaches that have been employed to measure the impact of TB NAATs on patient-important outcomes in adults with possible pulmonary TB and/or drug-resistant TB.We first develop a conceptual framework to clarify through which mechanisms the improved technical performance of a novel TB test may lead to improved patient outcomes and outline which designs may be used to measure them. We then systematically review the literature on studies attempting to assess the impact of molecular TB diagnostics on such outcomes and provide a narrative synthesis of designs used, outcomes assessed and risk of bias across different study designs.We found 25 eligible studies that assessed a wide range of outcomes and utilized a variety of experimental and observational study designs. Many potentially strong design options have never been used. We found that much of the available evidence on patient-important outcomes comes from a small number of settings with particular epidemiological and operational context and that confounding, time trends and incomplete outcome data receive insufficient attention.A broader range of designs should be considered when designing studies to assess the impact of TB diagnostics on patient outcomes and more attention needs to be paid to the analysis as concerns about confounding and selection bias become relevant in addition to those on measurement that are of greatest concern in accuracy studies.

Seismic margin reviews of nuclear power plants: Identification of important functions and systems

International Nuclear Information System (INIS)

Prassinos, P.G.; Moore, D.L.; Amico, P.J.

1987-01-01

The results from the review of the seven utility-sponsored seismic PRAs plus the Zion SSMRP have been used to develop some insights regarding the importance of various systems and functions to seismic margins. By taking this information and combining it with the fragility insights we can develop some functional/systemic screening guideline for margin studies. This screening approach will greatly reduce the scope of the analysis. It is possible only to come to conclusions regarding the importance of plant systems and safety functions for PWRs, for which six plants were studied. For PWRs, it is possible to categorize plant safety functions as belonging to one of two groups, one of which is important to the assessment of seismic margins and one of which is not. The important functional group involves only two functions that must be considered for estimating seismic margin. These two functions are shutting down the nuclear reaction and providing cooling to the reactor core in the time period immediately following the seismic event (that is, the injection phase or pre-residual heat removal time period). It is possible to reasonably estimate the seismic margin of the plant by performing a study only involving the analysis of the plant systems and structure which are required in order to perform the two functions. Such analysis must include an assessment of a complete set of seismic initiating events. (orig./HP)

ATP release, generation and hydrolysis in exocrine pancreatic duct cells

DEFF Research Database (Denmark)

Kowal, Justyna Magdalena; Yegutkin, G.G.; Novak, Ivana

2015-01-01

Extracellular adenosine triphosphate (ATP) regulates pancreatic duct function via P2Y and P2X receptors. It is well known that ATP is released from upstream pancreatic acinar cells. The ATP homeostasis in pancreatic ducts, which secrete bicarbonate-rich fluid, has not yet been examined. First, ou...... may be important in pancreas physiology and potentially in pancreas pathophysiology....... aim was to reveal whether pancreatic duct cells release ATP locally and whether they enzymatically modify extracellular nucleotides/sides. Second, we wished to explore which physiological and pathophysiological factors may be important in these processes. Using a human pancreatic duct cell line, Capan...

Fission gas release of MOX with heterogeneous structure

International Nuclear Information System (INIS)

Nakae, N.; Akiyama, H.; Kamimura, K; Delville, R.; Jutier, F.; Verwerft, M.; Miura, H.; Baba, T.

2015-01-01

It is very useful for fuel integrity evaluation to accumulate knowledge base on fuel behavior of uranium and plutonium mixed oxide (MOX) fuel used in light water reactors (LWRs). Fission gas release is one of fuel behaviors which have an impact on fuel integrity evaluation. Fission gas release behavior of MOX fuels having heterogeneous structure is focused in this study. MOX fuel rods with a heterogeneous fuel microstructure were irradiated in Halden reactor (IFA-702) and the BR-3/BR-2 CALLISTO Loop (CHIPS program). The 85 Kr gamma spectrometry measurements were carried out in specific cycles in order to examine the concerned LHR (Linear Heat Rate) for fission gas release in the CHIPS program. The concerned LHR is defined in this paper to be the LHR at which a certain additional fission gas release thermally occurs. Post-irradiation examination was performed to understand the fission gas release behavior in connection with the pellet microstructure. The followings conclusions can be made from this study. First, the concerned LHR for fission gas release is estimated to be in the range of 20-23 kW/m with burnup over 37 GWd/tM. It is moreover guessed that the concerned LHR for fission gas release tends to decrease with increasing burnup. Secondly It is observed that FGR (fission gas release rate) is positively correlated with LHR when the LHR exceeds the concerned value. Thirdly, when burnup dependence of fission gas release is discussed, effective burnup should be taken into account. The effective burnup is defined as the burnup at which the LHR should be exceed the concerned value at the last time during all the irradiation period. And fourthly, it appears that FGR inside Pu spots is higher than outside and that retained (not released) fission gases mainly exist in the fission gas bubbles. Since fission gases in bubbles are considered to be easily released during fuel temperature increase, this information is very important to estimate fission gas release behavior

Umatilla Satellite and Release Sites Project : Final Siting Report.

Energy Technology Data Exchange (ETDEWEB)

Montgomery, James M.

1992-04-01

This report presents the results of site analysis for the Umatilla Satellite and Release Sites Project. The purpose of this project is to provide engineering services for the siting and conceptual design of satellite and release facilities for the Umatilla Basin hatchery program. The Umatilla Basin hatchery program consists of artificial production facilities for salmon and steelhead to enhance production in the Umatilla River as defined in the Umatilla master plan approved in 1989 by the Northwest Power Planning Council. Facilities identified in the master plan include adult salmon broodstock holding and spawning facilities, facilities for recovery, acclimation, and/or extended rearing of salmon juveniles, and development of river sites for release of hatchery salmon and steelhead. The historic and current distribution of fall chinook, summer chinook, and coho salmon and steelhead trout was summarized for the Umatilla River basin. Current and future production and release objectives were reviewed. Twenty seven sites were evaluated for the potential and development of facilities. Engineering and environmental attributes of the sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

Drug release kinetic analysis and prediction of release data via polymer molecular weight in sustained release diltiazem matrices.

Science.gov (United States)

Adibkia, K; Ghanbarzadeh, S; Mohammadi, G; Khiavi, H Z; Sabzevari, A; Barzegar-Jalali, M

2014-03-01

This study was conducted to investigate the effects of HPMC (K4M and K100M) as well as tragacanth on the drug release rate of diltiazem (DLTZ) from matrix tablets prepared by direct compression method.Mechanism of drug transport through the matrices was studied by fitting the release data to the 10 kinetic models. 3 model independent parameters; i. e., mean dissolution time (MDT), mean release rate (MRR) and release rate efficacy (RE) as well as 5 time point approaches were established to compare the dissolution profiles. To find correlation between fraction of drug released and polymer's molecular weight, dissolution data were fitted into two proposed equations.All polymers could sustain drug release up to 10 h. The release data were fitted best to Peppas and Higuchi square root kinetic models considering squared correlation coefficient and mean percent error (MPE). RE and MRR were decreased when polymer to drug ratio was increased. Conversely, t60% was increased with raising polymer /drug ratio. The fractions of drug released from the formulations prepared with tragacanth were more than those formulated using the same amount of HPMC K4M and HPMC K100M.Preparation of DLTZ matrices applying HPMCK4M, HPMC K100M and tragacanth could effectively extend the drug release. © Georg Thieme Verlag KG Stuttgart · New York.

Potential of phytase-mediated iron release from cereal-based foods: a quantitative view

DEFF Research Database (Denmark)

Nielsen, Anne Veller Friis; Tetens, Inge; Meyer, Anne S.

2013-01-01

The major part of iron present in plant foods such as cereals is largely unavailable for direct absorption in humans due to complexation with the negatively charged phosphate groups of phytate (myo-inositol (1,2,3,4,5,6)-hexakisphosphate). Human biology has not evolved an efficient mechanism...... to naturally release iron from iron phytate complexes. This narrative review will evaluate the quantitative significance of phytase-catalysed iron release from cereal foods. In vivo studies have shown how addition of microbially derived phytases to cereal-based foods has produced increased iron absorption via...... phytate complexes, and (3) the extent of phytate dephosphorylation required for iron release from inositol phosphates is warranted. Phytase-mediated iron release can improve iron absorption from plant foods. There is a need for development of innovative strategies to obtain better effects....

Effect of self-myofascial release on myofascial pain, muscle flexibility, and strength: A narrative review.

Science.gov (United States)

Kalichman, Leonid; Ben David, Chen

2017-04-01

Numerous techniques have been employed to treat myofascial pain syndrome. Self-myofascial release (SMFR) is a relatively new technique of soft tissue mobilization. The simplicity and portability of the SMFR tools allow it to be easily implemented in any type of fitness or rehabilitation program. It is an active method and can be used by anyone at home or at the workplace. To review the current methods of SMFR, their mechanisms, and efficacy in treating myofascial pain, improving muscle flexibility and strength. PubMed, Google Scholar, and PEDro databases were searched without search limitations from inception until July 2016 for terms relating to SMFR. During the past decade, therapists and fitness professionals have implemented SMFR mainly via foam rolling as a recovery or maintenance tool. Researchers observed a significant increase in the joint range of motion after using the SMFR technique and no decrease in muscle force or changes in performance after treatment with SMFR. SMFR has been widely used by health-care professionals in treating myofascial pain. However, we found no clinical trials which evaluated the influence of SMFR on myofascial pain. There is an acute need for these trials to evaluate the efficacy and effectiveness of SMFR in the treatment of the myofascial syndrome. Copyright © 2016 Elsevier Ltd. All rights reserved.

Release of radioisotopes and activated materials from nuclear installations and facilities

International Nuclear Information System (INIS)

Manfredi, P.F.; Millaud, J. E.

2001-01-01

This report discusses the problems of release of items from facilities and installations where radiation-based activities have been carried out. Several situations are reviewed and their release problems are discussed in detail. Particular attention is devoted to the assessment of the activity of the items to be released. A correct assessment of the activity will help the decision about the final use of the items removed from the radiation-related facility, either re-use, entering the public market, recycling, disposal and storage under different procedures. Even the final destination of the building which hosted the facility needs to be decided on the basis of an accurate assessment of the residual activity. The assessment of the activity, besides being fundamental in guaranteeing a safe approach to the procedures related to the release may result in a substantial profit. This is the case of items whose level of activity is so low that they can be put on the public market, reused or recycled for final product subject to very stringent radiation safety requirements. It will be shown that detector techniques play a fundamental role in the release process. In particular, the low-level counting techniques are fundamental in establishing whether or not the unrestrained release is feasible or not

The Main Anatomical Variations of the Pancreatic Duct System: Review of the Literature and Its Importance in Surgical Practice.

Science.gov (United States)

Dimitriou, Ioannis; Katsourakis, Anastasios; Nikolaidou, Eirini; Noussios, George

2018-05-01

Anatomical variations or anomalies of the pancreatic ducts are important in the planning and performance of endoscopic retrograde cholangiopancreatography (ERCP) and surgical procedures of the pancreas. Normal pancreatic duct anatomy occurs in approximately 94.3% of cases, and multiple variations have been described for the remaining 5.7%. The purpose of this study was to review the literature on the pancreatic duct anatomy and to underline its importance in daily invasive endoscopic and surgical practice. Two main databases were searched for suitable articles published from 2000 to 2017, and results concerning more than 8,200 patients were included in the review. The most common anatomical variation was that of pancreas divisum, which appeared in approximately 4.5% of cases.

A review of electro analytical determinations of some important elements (Zn, Se, As) in environmental samples

International Nuclear Information System (INIS)

Lichiang; James, B.D.; Magee, R.J.

1991-01-01

This review covers electro analytical methods reported in the literature for the determination of zinc, cadmium, selenium and arsenic in environmental and biological samples. A comprehensive survey of electro analytical techniques used for the determination of four important elements, i.e. zinc, cadmium, selenium and arsenic is reported herein with 322 references up to 1990. (Orig./A.B.)

Review of tritium behavior in HTGR systems

International Nuclear Information System (INIS)

Gainey, B.W.

1976-01-01

The available experimental evidence from laboratory and reactor studies pertaining to tritium production, capture, release, and transport within an HTGR leading to release to the environment is reviewed. Possible mechanisms for release, capture, and transport are considered and a simple model was used to calculate the expected tritium release from HTGRs. Comparison with Federal regulations governing tritium release confirm that expected HTGR releases will be well within the allowable release limits. Releases from HTGRs are expected to be somewhat less than from LWRs based on the published LWR operating data. Areas of research deserving further study are defined but it is concluded that a tritium surveillance at Fort St. Vrain is the most immediate need

News/Press Releases

Data.gov (United States)

Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

The Importance of Magnesium in the Human Body: A Systematic Literature Review.

Science.gov (United States)

Glasdam, Sidsel-Marie; Glasdam, Stinne; Peters, Günther H

2016-01-01

Magnesium, the second and fourth most abundant cation in the intracellular compartment and whole body, respectively, is of great physiologic importance. Magnesium exists as bound and free ionized forms depending on temperature, pH, ionic strength, and competing ions. Free magnesium participates in many biochemical processes and is most commonly measured by ion-selective electrode. This analytical approach is problematic because complete selectivity is not possible due to competition with other ions, i.e., calcium, and pH interference. Unfortunately, many studies have focused on measurement of total magnesium rather than its free bioactive form making it difficult to correlate to disease states. This systematic literature review presents current analytical challenges in obtaining accurate and reproducible test results for magnesium. © 2016 Elsevier Inc. All rights reserved.

The Influence of Financial and Other Rewards to Release Human Creativity

Directory of Open Access Journals (Sweden)

Dejan Kralj

2013-10-01

Full Text Available Research Question (RQ: The research question was to determinewhether and to what extent the impact of monetary and other rewards release human creativity in an organization.Purpose: Release of human creative potential is very important in business. The purpose of this study was to explore whether and what is the influence of monetary and other rewards on human creativity.Method: Quantitative analysis with a survey on employees and management of the company. Hypothesis testing was used and data analysis was performed using a χ2 test.Results: The result of this research was that the financial rewards do not affect the release of human creativity within an organization. Other types of rewards do have an influence and they are also important factors in the release of human creative potentials within an organization.Organization: Business managers can use this study to detect if financial and other rewards influence on the release of human creativity, to what extent they influence, and what are alternatives.Society: Satisfaction of every human being is to provide basic needs. Motivated individuals can easily and efficiently release their creativity, which can benefit organizations, families, and society. The research findings may be used in more or less any other social contexts (public or private sector.Originality: The originality of the research is determining the types of rewards and motivations that affect the release of human creativity.Limitations/Future Research: The research is focused primarily on the issue if financial and other rewards influence the release of human creativity, but not other factors (conditions outside the organization, political and economic climate, situation in the family and society.

Review on 18th Revision of 'Notice on Export and Import of Strategic Items'

International Nuclear Information System (INIS)

Jeon, Jihye; Lee, Chansuh

2014-01-01

Nuclear Suppliers Group (NSG) has established a guideline and continued to revise it in accordance with ever-changing international situation and developing technology. The Part 1 of guideline, 'Guidelines of Nuclear Transfers' covers the Trigger List items which triggers safeguards as a condition of supply. Currently NSG has published the 12 th revised guideline (INFCIRC/254/Rev.12/Part1) in November 2013. Korean government fully reflected the guideline to its national legislation to implement in accordance with internationally agreed standard. The export control of nuclear strategic items in Korea is responsibility of Nuclear Safety and Security Commission (NSSC), which entrusted the technical review of the work to Korea Institute of Nonproliferation and Control (KINAC). The specific guidelines for the technical review are stipulated in Notice on Export and Import of Strategic Items with other strategic items usable to other Weapons of Mass Destruction. The Ministry of Trade, Industry and Energy approved the 18 th revision of Notice on Export and Import of Strategic Items on 31 January 2014 as Notice no. 2014-15, which strictly follows the NSG guideline. The 18 th revision of the notice reflects the final proposals agreed from the last Dedicated Meeting of Technical Experts (DMTE) of NSG's Consultative Group (CG) in April 2013. The 3-year-DMTE offered the 'fundamental, holistic approach to the technical review' within the international framework of NSG, rather than sporadic endeavors by individual states in the past. The 18 th version itself has meaning in that the final products of the international technical review were reflected in the Korean national legislation of nuclear export control. It addressed various changes in control text in technical, contextual, and editorial aspects. The revision is analyzed herein concentrating only on technical and semantic changes in control text

A review of processes important in the floodplain setting

OpenAIRE

Stuart, M.E.; Lapworth, D.J.

2011-01-01

This report reviews the physical and geochemical processes reported in the literature and likely to be operating in the floodplain setting. The review supports a study of the Port Meadow, located within the floodplain of the River Thames to the northwest of the city of Oxford, an area affected by urban pollution. It focuses on floodplains but includes both material for the hyporheic zone and also generally for riparian zones. It describes the processes, generically covers case ...

Slow-release fluoride devices for the control of dental decay.

Science.gov (United States)

Chong, Lee-Yee; Clarkson, Jan E; Dobbyn-Ross, Lorna; Bhakta, Smriti

2018-03-01

Slow-release fluoride devices have been investigated as a potentially cost-effective method of reducing dental caries in people with high risk of disease. This is the second update of the Cochrane Review first published in 2006 and previously updated in 2014. To evaluate the effectiveness and safety of different types of slow-release fluoride devices on preventing, arresting, or reversing the progression of carious lesions on all surface types of primary (deciduous) and permanent teeth. Cochrane Oral Health's Information Specialist searched the following electronic databases: Cochrane Oral Health's Trials Register (to 23 January 2018); the Cochrane Central Register of Controlled Trials (CENTRAL; 2017, Issue 12) in the Cochrane Library (searched 23 January 2018); MEDLINE Ovid (1946 to 23 January 2018); and Embase Ovid (1980 to 23 January 2018). The US National Institutes of Health Ongoing Trials Register ClinicalTrials.gov, and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials (23 January 2018). We placed no restrictions on the language or date of publication when searching the electronic databases. Parallel randomised controlled trials (RCTs) comparing slow-release fluoride devices with an alternative fluoride treatment, placebo, or no intervention in all age groups. The main outcome measures sought were changes in numbers of decayed, missing, and filled teeth or surfaces (DMFT/DMFS in permanent teeth or dmft/dmfs in primary teeth), and progression of carious lesions through enamel and into dentine. We conducted data collection and analysis using standard Cochrane review methods. At least two review authors independently performed all the key steps in the review such as screening of abstracts, application of inclusion criteria, data extraction, and risk of bias assessment. We resolved discrepancies through discussions or arbitration by a third or fourth review author. We found no evidence comparing slow-release

Exposure to lead and cadmium released from ceramics and glassware intended to come into contact with food.

Science.gov (United States)

Rebeniak, Małgorzata; Wojciechowska-Mazurek, Maria; Mania, Monika; Szynal, Tomasz; Strzelecka, Agnieszka; Starska, Krystyna

2014-01-01

The dietary intake of harmful elements, particularly lead and cadmium constitutes a health threat and essential measures should be undertaken to reduce consumer exposure. The latest risk assessments by the European Food Safety Authority (EFSA) and Joint FAO/WHO Expert Committee on Food Additives (JECFA) have indicated that the Provisional Tolerable Weekly Intake (PTWI) for lead and cadmium do not ensure health safety and their review had to be undertaken. Migration from ceramics and glassware intended for food contact is an important source of lead and cadmium intake. To study the release of lead and cadmium from ceramics and glassware (including decorated products) intended for food contact that are available on the Polish market and to assess the resulting health risk to the consumer. Ceramics and glassware (mainly decorated) were sampled from the Polish market during 2010- 2012 throughout the country by staff of the Sanitary-Epidemiological Stations in accordance with monitoring procedures and guidelines designed by the National Institute of Public Health-National Institute of Hygiene. Migration of lead and cadmium was measured by incubating the samples with 4% acetic acid for 24 hours at a temperature of 22±2ºC in the dark. Flame Atomic Absorption Spectrometry (FAAS) was used to measure these elements in food simulant according to a validated and accredited method (PN-EN ISO/IEC 17025). 1273 samples of ceramics and glass wares were analysed in 2010-2012. Lead and cadmium release were usually found to be below analytical detection limits. Permissible migration limits (as prescribed by the legislation) of these metals were rarely exceeded and were reported mainly in articles imported from outside the EU. Two imported and decorated ceramic flat plates released lead at 0.9 and 11.9 mg/dm2 (limit 0.8 mg/dm2) and 5 imported deep plates gave migration values of 4.7 mg/L, 4.9 mg/L, 5.6 mg/L, 6.1 mg/L, 8.6 mg/L (limit 4.0 mg/L). Lead migrations from ceramic ware rims

Press releases — the new trend in science communication

DEFF Research Database (Denmark)

Autzen, Charlotte

2014-01-01

Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

Action potential-independent and pharmacologically unique vesicular serotonin release from dendrites

Science.gov (United States)

Colgan, Lesley A.; Cavolo, Samantha L.; Commons, Kathryn G.; Levitan, Edwin S.

2012-01-01

Serotonin released within the dorsal raphe nucleus (DR) induces feedback inhibition of serotonin neuron activity and consequently regulates mood-controlling serotonin release throughout the forebrain. Serotonin packaged in vesicles is released in response to action potentials by the serotonin neuron soma and terminals, but the potential for release by dendrites is unknown. Here three-photon (3P) microscopy imaging of endogenous serotonin in living rat brain slice, immunofluorescence and immuno-gold electron microscopy detection of VMAT2 (vesicular monoamine transporter 2) establish the presence of vesicular serotonin within DR dendrites. Furthermore, activation of glutamate receptors is shown to induce vesicular serotonin release from dendrites. However, unlike release from the soma and terminals, dendritic serotonin release is independent of action potentials, relies on L-type Ca2+ channels, is induced preferentially by NMDA, and displays distinct sensitivity to the selective serotonin reuptake inhibitor (SSRI) antidepressant fluoxetine. The unique control of dendritic serotonin release has important implications for DR physiology and the antidepressant action of SSRIs, dihydropyridines and NMDA receptor antagonists. PMID:23136413

A Comparative Study on the Lot Release Systems for Vaccines as of 2016.

Science.gov (United States)

Fujita, Kentaro; Naito, Seishiro; Ochiai, Masaki; Konda, Toshifumi; Kato, Atsushi

2017-09-25

Many countries have already established their own vaccine lot release system that is designed for each country's situation: while the World Health Organization promotes for the convergence of these regulatory systems so that vaccines of assured quality are provided globally. We conducted a questionnaire-based investigation of the lot release systems for vaccines in 7 countries and 2 regions. We found that a review of the summary protocol by the National Regulatory Authorities was commonly applied for the independent lot release of vaccines, however, we also noted some diversity between countries, especially in regard to the testing policy. Some countries and regions, including Japan, regularly tested every lot of vaccines, whereas the frequency of these tests was reduced in other countries and regions as determined based on the risk assessment of these products. Test items selected for the lot release varied among the countries or regions investigated, although there was a tendency to prioritize the potency tests. An understanding of the lot release policy may contribute to improving and harmonizing the lot release system globally in the future.

Release of E.coli D21g with transients in water content

Science.gov (United States)

Transients in water content are well known to mobilize microorganisms that are retained in the vadose zone. However, there is no consensus on the relative importance of drainage and imbibition events on microorganism release. To overcome this limitation, we have systematically studied the release o...

Determination of accident related release data

International Nuclear Information System (INIS)

Koch, W.; Nolte, O.; Lange, F.; Martens, R.

2004-01-01

For accident safety analyses, for the assessment of potential radiological consequences, for the review of current requirements of the Transport Regulations and for their possible further development as well as for the demonstration that radioactive materials such as LDM candidate material fulfil the regulatory requirements reliable release data following mechanical impact are required. This is definitely one of the demanding issues in the field of transport safety of radioactive materials. In this context special attention has to be paid to radioactive wastes immobilised in brittle materials, e.g. cement/concrete, glass, ceramics or other brittle materials such as fresh and spent fuel. In this presentation we report on a long-term experimental program aiming at improving the general physical understanding of the release process as well as the quantity and the quality of release data. By combining laboratory experiments using small scale test specimens with a few key scaling experiments with large scale test objects significant progress was achieved to meet this objective. The laboratory equipment enables the in-situ determination of the amount and aerodynamic size distribution of the airborne particles generated upon impact of the test specimen on a hard target. Impact energies cover the range experienced in transport accidents including aircraft accidents. The well defined experimental boundary conditions and the good reproducibility of the experimental procedure allowed for systematic studies to exactly measure the amount and aerodynamic size distribution of the airborne release and to quantify its dependence on relevant parameters such as energy input, material properties, and specimen geometry. The experimental program was performed within the scope of various national and international (e.g. EU-funded) projects. The small scale experiments with brittle materials revealed a pronounced universality of the airborne release in view of the material properties and

Qualitative release assessment to estimate the likelihood of henipavirus entering the United Kingdom.

Directory of Open Access Journals (Sweden)

Emma L Snary

Full Text Available The genus Henipavirus includes Hendra virus (HeV and Nipah virus (NiV, for which fruit bats (particularly those of the genus Pteropus are considered to be the wildlife reservoir. The recognition of henipaviruses occurring across a wider geographic and host range suggests the possibility of the virus entering the United Kingdom (UK. To estimate the likelihood of henipaviruses entering the UK, a qualitative release assessment was undertaken. To facilitate the release assessment, the world was divided into four zones according to location of outbreaks of henipaviruses, isolation of henipaviruses, proximity to other countries where incidents of henipaviruses have occurred and the distribution of Pteropus spp. fruit bats. From this release assessment, the key findings are that the importation of fruit from Zone 1 and 2 and bat bushmeat from Zone 1 each have a Low annual probability of release of henipaviruses into the UK. Similarly, the importation of bat meat from Zone 2, horses and companion animals from Zone 1 and people travelling from Zone 1 and entering the UK was estimated to pose a Very Low probability of release. The annual probability of release for all other release routes was assessed to be Negligible. It is recommended that the release assessment be periodically re-assessed to reflect changes in knowledge and circumstances over time.

IRIS Toxicological Review of Hexahydro-1,3,5-Trinitro-1,3,5-Triazine (RDX) (External Review Draft)

Science.gov (United States)

The IRIS Toxicological Review of Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) was released for external peer review in September 2016. The EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis suppor...

The importance of simulation facilities for the development of review criteria for advanced human system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Wachtel, J.

1994-01-01

Advanced control room (ACR) concepts are being developed in the commercial nuclear industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role (function) in the system, the method of information presentation, the ways in which the operator interacts with the system, and the requirements on the operator to understand and supervise an increasingly complex system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support their review of these advanced designs. As part of this effort, a methodology for guidance development was established, and topics in need of further research were identified. Simulators of various kinds are likely to play important roles in the development of review guidelines and in the evaluation of ACRs. This paper describes a general approach to review criteria development, and discusses the role of simulators in addressing research needs

Effects of compost age on the release of nutrients

Directory of Open Access Journals (Sweden)

Bilal B. Al-Bataina

2016-09-01

Full Text Available Composted organic materials are applied to help restore disturbed soils, speed revegetation, and control erosion; these changes are generally beneficial for stormwater quality. Ensuring that nutrient release from compost is adequate for plant needs without degrading stormwater quality is important since composts release nitrogen at variable rates (1–3% of total N/yr and the leaching process can extend for many years. The aim of this work was to understand the effect of compost age on the extent and rates of nitrogen release by conducting detailed rainfall simulation studies of one compost type at three different ages. Models describing temporal changes in nitrogen release to runoff during a single storm and across multiple storms were developed and applied to the runoff data. Nitrogen content (% and bulk density of compost increased with the increase in compost age and total nitrogen release decreased with increasing compost age. The three rain simulations (storms performed on each of the three compost ages show that nitrogen release declined each day of the repeated daily storms. A first-order kinetic model was used to estimate the amount of nitrogen remaining on compost after several storms.

Derived release limits for airborne effluents at TRIGA - INR Reactor

International Nuclear Information System (INIS)

Toma, A.; Dulama, C.; Hirica, O.; Mihai, S.; Oprea, I.

2008-01-01

Beginning from fulfilling the purposes of dose limitation system recommended by ICRP, and now accepted in radiation protection, this paper presents an environmental transfer model to calculate derived release limits for airborne and gaseous radioactive effluents at TRIGA-INR, 14 MW Steady State Reactor, in function on INR-Pitesti site. The methodology consists in determination of the principal exposure pathways for different groups of population and dose calculations for each radionuclide. The characterization of radionuclides transfer to environment was made using the compartmental model. The parameter transfer concept was used to describe the distribution of radionuclides between the different compartments. Atmospheric dispersion was very carefully treated, because it is the primary mechanism of the transfer of radionuclides in the environment and it determines all exposure pathways. Calculation of the atmospheric dispersion was made using ORION-II computer code based on the Gaussian plume model which takes account of site's specific climate and relief conditions. Default values recommended by literature were used to calculate some of the parameters when specific site values were not available. After identification of all transfer parameters which characterize the most important exposure pathways, the release rate corresponding to the individual dose rate limit was calculated. This maximum release rate is the derived release limit for each radionuclide and source. In the paper, the derived release limits are calculated for noble gases, radioiodine and other airborne particulate radionuclides, which can be released on the TRIGA-INR reactor stack, and are important to radiation protection. (authors)

Minimal Clinically Important Difference in Parkinson’s Disease as Assessed in Pivotal Trials of Pramipexole Extended Release

Directory of Open Access Journals (Sweden)

Robert A. Hauser

2014-01-01

Full Text Available Background. The minimal clinically important difference (MCID is the smallest change in an outcome measure that is meaningful for patients. Objectives. To calculate the MCID for Unified Parkinson’s Disease Rating Scale (UPDRS scores in early Parkinson’s disease (EPD and for UPDRS scores and “OFF” time in advanced Parkinson’s disease (APD. Methods. We analyzed data from two pivotal, double-blind, parallel-group trials of pramipexole ER that included pramipexole immediate release (IR as an active comparator. We calculated MCID as the mean change in subjects who received active treatment and rated themselves “a little better” on patient global impression of improvement (PGI-I minus the mean change in subjects who received placebo and rated themselves unchanged. Results. MCIDs in EPD (pramipexole ER, pramipexole IR for UPDRS II were −1.8 and −2.0, for UPDRS III −6.2 and −6.1, and for UPDRS II + III −8.0 and −8.1. MCIDs in APD for UPDRS II were −1.8 and −2.3, for UPDRS III −5.2 and −6.5, and for UPDRS II + III −7.1 and −8.8. MCID for “OFF” time (pramipexole ER, pramipexole IR was −1.0 and −1.3 hours. Conclusions. A range of MCIDs is emerging in the PD literature that provides the basis for power calculations and interpretation of clinical trials.

Impairment of Release Site Clearance within the Active Zone by Reduced SCAMP5 Expression Causes Short-Term Depression of Synaptic Release

Directory of Open Access Journals (Sweden)

Daehun Park

2018-03-01

Full Text Available Summary: Despite being a highly enriched synaptic vesicle (SV protein and a candidate gene for autism, the physiological function of SCAMP5 remains mostly enigmatic. Here, using optical imaging and electrophysiological experiments, we demonstrate that SCAMP5 plays a critical role in release site clearance at the active zone. Truncation analysis revealed that the 2/3 loop domain of SCAMP5 directly interacts with adaptor protein 2, and this interaction is critical for its role in release site clearance. Knockdown (KD of SCAMP5 exhibited pronounced synaptic depression accompanied by a slower recovery of the SV pool. Moreover, it induced a strong frequency-dependent short-term depression of synaptic release, even under the condition of sufficient release-ready SVs. Super-resolution microscopy further proved the defects in SV protein clearance induced by KD. Thus, reduced expression of SCAMP5 may impair the efficiency of SV clearance at the active zone, and this might relate to the synaptic dysfunction observed in autism. : Park et al. show that SCAMP5 plays an important role in release site clearance during intense neuronal activity. Loss of SCAMP5 results in a traffic jam at release sites, causing aberrant short-term synaptic depression that might be associated with the synaptic dysfunction observed in autism. Keywords: secretory carrier membrane protein, SCAMP5, autism spectrum disorder, adaptor protein 2, release site clearance, presynaptic active zone, short-term depression, endocytosis, super-resolution microscopy

Release of CFC-11 from disposal of polyurethane foam waste

DEFF Research Database (Denmark)

Kjeldsen, Peter; Jensen, M.H.

2001-01-01

The halocarbon CFC-11 has extensively been used as a blowing agent for polyurethane (PUR) insulation foams in home appliances and for residential and industrial construction. Release of CFCs is an important factor in the depletion of the ozone layer. For CFC-11 the future atmospheric concentrations...... will mainly depend on the continued release from PUR foams. Little is known about rates and time frames of the CFC release from foams especially after treatment and disposal of foam containing waste products. The CFC release is mainly controlled by slow diffusion out through the PUR. From the literature...... and by reevaluation of an old reported experiment, diffusion coefficients in the range of 0.05-1.7.10(-14) m(2) s(-1) were found reflecting differences in foam properties and experimental designs. Laboratory experiments studying the distribution of CFC in the foam and the short-term releases after shredding showed...

Release enhancement of tritium from graphite by addition of hydrogen

International Nuclear Information System (INIS)

Saeki, Masakatsu; Masaki, N.M.

1989-01-01

The release behavior of tritium from graphite was studied in pure He and He + H 2 atmosphere. The release from powdered graphite was significantly enhanced in hydrogen environment. Apparent diffusion coefficients of tritium in graphite also became much higher in an atmosphere containing hydrogen than values obtained in pure helium atmosphere. A careful investigation of the release processes resulted in the conclusion that the most important process of tritium behaviour in graphite was diffusion, but the desorption process of tritium from the surface played a significant role. The enhancement of the desorption process was controlled by atomic hydrogen. (orig.)

Important processes affecting the release and migration of radionuclides from a deep geological repository

International Nuclear Information System (INIS)

Barátová, Dana; Nečas, Vladimír

2017-01-01

The processes that affect significantly the transport of contaminants through the near field and far field of a deep geological repository of spent nuclear fuel were studied. The processes can be generally divided into (i) processes related to the release of radionuclides from the spent nuclear fuel; (ii) processes related to the radionuclide transport mechanisms (such as advection and diffusion); and (iii) processes affecting the rate of radionuclide migration through the multi-barrier repository system. A near-field and geosphere model of an unspecified geological repository sited in a crystalline rock is also described. Focus of the treatment is on the effects of the different processes on the activity flow of the major safety-relevant radionuclides. The activity flow was simulated for one spent fuel cask by using the GoldSim simulation tool. (orig.)

Food emulsions as delivery systems for flavor compounds: A review.

Science.gov (United States)

Mao, Like; Roos, Yrjö H; Biliaderis, Costas G; Miao, Song

2017-10-13

Food flavor is an important attribute of quality food, and it largely determines consumer food preference. Many food products exist as emulsions or experience emulsification during processing, and therefore, a good understanding of flavor release from emulsions is essential to design food with desirable flavor characteristics. Emulsions are biphasic systems, where flavor compounds are partitioning into different phases, and the releases can be modulated through different ways. Emulsion ingredients, such as oils, emulsifiers, thickening agents, can interact with flavor compounds, thus modifying the thermodynamic behavior of flavor compounds. Emulsion structures, including droplet size and size distribution, viscosity, interface thickness, etc., can influence flavor component partition and their diffusion in the emulsions, resulting in different release kinetics. When emulsions are consumed in the mouth, both emulsion ingredients and structures undergo significant changes, resulting in different flavor perception. Special design of emulsion structures in the water phase, oil phase, and interface provides emulsions with great potential as delivery systems to control flavor release in wider applications. This review provides an overview of the current understanding of flavor release from emulsions, and how emulsions can behave as delivery systems for flavor compounds to better design novel food products with enhanced sensorial and nutritional attributes.

The pivotal role of primary care in meeting the health needs of people recently released from prison.

Science.gov (United States)

Kinner, Stuart A; Young, Jesse T; Carroll, Megan

2015-12-01

Australia's prison population is growing at a rate well in excess of population growth. Indigenous Australians are over-represented by a factor of 13. Prisoners are a profoundly marginalised group characterised by complex health and social needs. Despite improvements in health during incarceration, poor health outcomes after release are common, and the net effect of incarceration is usually health depleting. Given the need for effective care coordination, primary care plays a pivotal role in meeting the health needs of this population. In this paper we review what is known about patterns of primary care utilisation in ex-prisoners, identify evidence-based strategies for increasing access to primary care in ex-prisoners, and consider how such contact may shape subsequent health service outcomes. Primary care is a necessary but not sufficient condition for effective post-release support. Positive outcomes may depend more on the quality than the quantity of care received. Given massive over-representation of Indigenous people in Australia's prisons, and compelling evidence of preventable morbidity and mortality after release from prison, effective models of care for this population are an important component of closing the gap in Indigenous life expectancy. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Regulation of somatostatin release in the nervous system of the rat

International Nuclear Information System (INIS)

Sheppard, M.

1979-08-01

This thesis represents the work done to study the release of somatostatin from the rat central nervous system in vitro, providing some evidence for a physiological role for somatostatin. Somatostatin was measured by a sensitive and specific radioimmunoassay devoloped in the laboratory. Chapter 2 reviews the literature on hypothalamic peptides and control of an anterior pituitary function, somatostatin, other central nervous system peptides and neurosecretion. Chapter 3 describes the central nervous system tissue dissection technique, the radioimmunoassay for somatostatin and the tissue levels of somatostatin immunoreactivity in different areas of the central nervous system. Chapter 4 deals with the release of immunoreactive somatostatin from incubated rat hypothalamus in vitro and the influence of other hormones and neuropeptides on this release. Chapter 5 describes the preparation of isolated nerve endings (synaptosomes) from four different areas of rat brain, the localisation of somatostatin to the synaptosome fraction of brain homogenates and the release of somatostatin from these synaptosomes. Chapter 6 deals with the release of somatostatin from incubated rat spinal cord in vitro. Chapter 7 presents the results of the characterisation of released immunoreactive material, the technique utilised being serial dilution of immunoreactive material and comparison to the standard curve, Sephadex gel chromatography, affinity chromatography, and the effect of released immunoreactive somatostatin on growth hormone release from perifused hemipituitaries in vitro, i.e. biological activity. Chapter 8 provides a summary of the main conclusions reached in this study and is followed by the Appendix describing chemical and biochemical methods, histological techniques, and statistical methods

POLYURETHANE COMPOSITES AS DRUG CARRIERS:: RELEASE PATTERNS

Directory of Open Access Journals (Sweden)

M. V. Grigoreva

2013-10-01

Full Text Available Biodegradable polyurethanes attract interest of those developing composite materials for biomedical applications. One of their features is their ability to serve as carriers, or matrixes, for medicines and other bioactive compounds to produce a therapeutic effect in body through targeted and/or prolonged delivery of these compounds in the process of their controlled release from matrix. The review presents polyurethane composites as matrices for a number of drugs. The relation between structure of the composites and their degradability both in vitro and in vivo and the dependence of drug release kinetics on physicochemical properties of polyurethane matrix are highlighted. The release of drugs (cefazolin, naltrexone and piroxicam from the composites based on cross-linked polyurethanes (synthesized from laprols, Mw between 1,500 and 2,000 Da and toluylene diisocyanate demonstrated more or less the same pattern (about 10 days in vitro and three to five days in vivo. In contrast, the composites with dioxydine based on a linear polyurethanes (synthesized from oligotetramethilene glycol, Mw 1,000 Da, diphenylmethane-4,4’-diisocyanate and 1,4-butanediol retained their antimicrobial activity at least 30 days. They also showed a significantly higher breaking strength as compared to that of the composites based on cross-linked polyurethanes.

Air-Stimulated ATP Release from Keratinocytes Occurs through Connexin Hemichannels

Science.gov (United States)

Barr, Travis P.; Albrecht, Phillip J.; Hou, Quanzhi; Mongin, Alexander A.; Strichartz, Gary R.; Rice, Frank L.

2013-01-01

Cutaneous ATP release plays an important role in both epidermal stratification and chronic pain, but little is known about ATP release mechanisms in keratinocytes that comprise the epidermis. In this study, we analyzed ATP release from cultured human neonatal keratinocytes briefly exposed to air, a process previously demonstrated to trigger ATP release from these cells. We show that exposing keratinocytes to air by removing media for 15 seconds causes a robust, long-lasting ATP release. This air-stimulated ATP release was increased in calcium differentiated cultures which showed a corresponding increase in connexin 43 mRNA, a major component of keratinocyte hemichannels. The known connexin hemichannel inhibitors 1-octanol and carbenoxolone both significantly reduced air-stimulated ATP release, as did two drugs traditionally used as ABC transporter inhibitors (glibenclamide and verapamil). These same 4 inhibitors also prevented an increase in the uptake of a connexin permeable dye induced by air exposure, confirming that connexin hemichannels are open during air-stimulated ATP release. In contrast, activity of the MDR1 ABC transporter was reduced by air exposure and the drugs that inhibited air-stimulated ATP release had differential effects on this transporter. These results indicate that air exposure elicits non-vesicular release of ATP from keratinocytes through connexin hemichannels and that drugs used to target connexin hemichannels and ABC transporters may cross-inhibit. Connexins represent a novel, peripheral target for the treatment of chronic pain and dermatological disease. PMID:23457608

HPMA Copolymer-Drug Conjugates with Controlled Tumor-Specific Drug Release.

Science.gov (United States)

Chytil, Petr; Koziolová, Eva; Etrych, Tomáš; Ulbrich, Karel

2018-01-01

Over the past few decades, numerous polymer drug carrier systems are designed and synthesized, and their properties are evaluated. Many of these systems are based on water-soluble polymer carriers of low-molecular-weight drugs and compounds, e.g., cytostatic agents, anti-inflammatory drugs, or multidrug resistance inhibitors, all covalently bound to a carrier by a biodegradable spacer that enables controlled release of the active molecule to achieve the desired pharmacological effect. Among others, the synthetic polymer carriers based on N-(2-hydroxypropyl) methacrylamide (HPMA) copolymers are some of the most promising carriers for this purpose. This review focuses on advances in the development of HPMA copolymer carriers and their conjugates with anticancer drugs, with triggered drug activation in tumor tissue and especially in tumor cells. Specifically, this review highlights the improvements in polymer drug carrier design with respect to the structure of a spacer to influence controlled drug release and activation, and its impact on the drug pharmacokinetics, enhanced tumor uptake, cellular trafficking, and in vivo antitumor activity. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Controlled release systems containing solid dispersions: strategies and mechanisms.

Science.gov (United States)

Tran, Phuong Ha-Lien; Tran, Thao Truong-Dinh; Park, Jun Bom; Lee, Beom-Jin

2011-10-01

In addition to a number of highly soluble drugs, most new chemical entities under development are poorly water-soluble drugs generally characterized by an insufficient dissolution rate and a small absorption window, leading to the low bioavailability. Controlled-release (CR) formulations have several potential advantages over conventional dosage forms, such as providing a uniform and prolonged therapeutic effect to improve patient compliance, reducing the frequency of dosing, minimizing the number of side effects, and reducing the strength of the required dose while increasing the effectiveness of the drug. Solid dispersions (SD) can be used to enhance the dissolution rate of poorly water-soluble drugs and to sustain the drug release by choosing an appropriate carrier. Thus, a CR-SD comprises both functions of SD and CR for poorly water-soluble drugs. Such CR dosage forms containing SD provide an immediately available dose for an immediate action followed by a gradual and continuous release of subsequent doses to maintain the plasma concentration of poorly water-soluble drugs over an extended period of time. This review aims to summarize all currently known aspects of controlled release systems containing solid dispersions, focusing on the preparation methods, mechanisms of action and characterization of physicochemical properties of the system.

IRIS Toxicological Review of Trichloroethylene (Interagency Science Consultation Draft)

Science.gov (United States)

On November 3, 2009, the Toxicological Review of Trichloroethylene and the charge to external peer reviewers were released for external peer review and public comment. The Toxicological Review and charge were reviewed internally by EPA and by other federal agencies and White Hous...

Improved emergency elevated air release for simplified PWR

International Nuclear Information System (INIS)

Naitoh, T.; Bruce, R.A.; Hirota, K.; Tajiri, Y.

1992-01-01

In developing the application of the simplified PWR in Japan, one of the most important areas is to limit post-accident site boundary whole body dose. In addressing this, the concept of Emergency Passive Air Filtration System (EPAFS) and it's feasibility is developed. The efficiency of charcoal filtering and the atmospheric diffusion effect of an elevated air release are important for dose reduction. The performance of these functions was evaluated by confirmatory testing. The test results confirmed a 99 percent efficiency of charcoal filter and an atmospheric diffusion effect higher than that of a conventional plant. The Emergency Passive Air Filtration System (EPAFS) and the atmospheric diffusion effect of elevated air release contribute to making the calculated post-accident site boundary whole body dose of simplified PWR as low as that of the conventional Japanese PWR plant. (author)

Cyclosporine Induces Endothelial Cell Release of Complement-Activating Microparticles

Science.gov (United States)

Renner, Brandon; Klawitter, Jelena; Goldberg, Ryan; McCullough, James W.; Ferreira, Viviana P.; Cooper, James E.; Christians, Uwe

2013-01-01

Defective control of the alternative pathway of complement is an important risk factor for several renal diseases, including atypical hemolytic uremic syndrome. Infections, drugs, pregnancy, and hemodynamic insults can trigger episodes of atypical hemolytic uremic syndrome in susceptible patients. Although the mechanisms linking these clinical events with disease flares are unknown, recent work has revealed that each of these clinical conditions causes cells to release microparticles. We hypothesized that microparticles released from injured endothelial cells promote intrarenal complement activation. Calcineurin inhibitors cause vascular and renal injury and can trigger hemolytic uremic syndrome. Here, we show that endothelial cells exposed to cyclosporine in vitro and in vivo release microparticles that activate the alternative pathway of complement. Cyclosporine-induced microparticles caused injury to bystander endothelial cells and are associated with complement-mediated injury of the kidneys and vasculature in cyclosporine-treated mice. Cyclosporine-induced microparticles did not bind factor H, an alternative pathway regulatory protein present in plasma, explaining their complement-activating phenotype. Finally, we found that in renal transplant patients, the number of endothelial microparticles in plasma increases 2 weeks after starting tacrolimus, and treatment with tacrolimus associated with increased C3 deposition on endothelial microparticles in the plasma of some patients. These results suggest that injury-associated release of endothelial microparticles is an important mechanism by which systemic insults trigger intravascular complement activation and complement-dependent renal diseases. PMID:24092930

Noble Gas Release Signal as a Precursor to Fracture

Science.gov (United States)

Bauer, S. J.; Lee, H.; Gardner, W. P.

2017-12-01

We present empirical results of rock strain, microfracturing, acoustic emissions, and noble gas release from laboratory triaxial experiments for a granite, basalt, shale and bedded rock salt. Noble gases are released and measured real-time during deformation using mass spectrometry. The gas release represents a precursive signal to macrofracture. Gas release is associated with increased acoustic emissions indicating that microfracturing is required to release gas and create pathways for the gas to be sensed. The gas released depends on initial gas content, pore structure and its evolution during deformation, the deformation amount, matrix permeability, deformation style and the stress/strain history. Gases are released from inter and intracrystalline sites; release rate increases as strain and microfracturing increases. The gas composition depends on lithology, geologic history and age, fluids present, and radioisotope concentrations that affect radiogenic noble gas isotope (e.g. 4He,40Ar) production. Noble gas emission and its relationship to crustal processes such as seismicity and volcanism, tectonic velocities, qualitative estimates of deep permeability, age dating of groundwater, and a signature of nuclear weapon detonation. Our result show that mechanical deformation of crustal materials is an important process controlling gas release from rocks and minerals, and should be considered in techniques which utilize gas release and/or accumulation. We propose using noble gas release to signal rock deformation in boreholes, mines and waste repositories. We postulate each rock exhibits a gas release signature which is microstructure, stress, strain, and/or permanent deformation dependent. Calibration of such relationships, for example relating gas release per rock unit volume to strain may be used to quantify rock deformation and develop predictive models.Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and

Alterations in the corticotropin-releasing hormone (CRH) neurocircuitry: Insights into post stroke functional impairments.

Science.gov (United States)

Barra de la Tremblaye, P; Plamondon, H

2016-07-01

Although it is well accepted that changes in the regulation of the hypothalamic-pituitary adrenal (HPA) axis may increase susceptibility to affective disorders in the general population, this link has been less examined in stroke patients. Yet, the bidirectional association between depression and cardiovascular disease is strong, and stress increases vulnerability to stroke. Corticotropin-releasing hormone (CRH) is the central stress hormone of the HPA axis pathway and acts by binding to CRH receptors (CRHR) 1 and 2, which are located in several stress-related brain regions. Evidence from clinical and animal studies suggests a role for CRH in the neurobiological basis of depression and ischemic brain injury. Given its importance in the regulation of the neuroendocrine, autonomic, and behavioral correlates of adaptation and maladaptation to stress, CRH is likely associated in the pathophysiology of post stroke emotional impairments. The goals of this review article are to examine the clinical and experimental data describing (1) that CRH regulates the molecular signaling brain circuit underlying anxiety- and depression-like behaviors, (2) the influence of CRH and other stress markers in the pathophysiology of post stroke emotional and cognitive impairments, and (3) context and site specific interactions of CRH and BDNF as a basis for the development of novel therapeutic targets. This review addresses how the production and release of the neuropeptide CRH within the various regions of the mesocorticolimbic system influences emotional and cognitive behaviors with a look into its role in psychiatric disorders post stroke. Copyright © 2016 Elsevier Inc. All rights reserved.

Hydraulic running and release tool with mechanical emergency release

International Nuclear Information System (INIS)

Baker, S.F.

1991-01-01

This patent describes a setting tool for connection in a well string to position a tubular member in a well bore. It comprises: a mandrel adapted to be connected to the well string; an outer sleeve surrounding the mandrel and releasably secured thereto; a latch nut releasably connected to the outer sleeve; piston means sealingly engaging the mandrel; shear means releasably securing the piston to the latch nut to maintain the latch nut releasably connected to the tubular member; the mandrel having port means for conducting fluid pressure from the well string to release the piston means from and the latch nut; cooperating engageable surfaces on the piston and latch nut to reengage them together after the piston moves a predetermined longitudinal distance relative to the latch nut; and additional cooperating engageable surfaces on the latch nut and the outer sleeve which are engageable when the piston and engaged latch nut are moved a predetermined additional longitudinal distance by fluid pressure to secure the engaged piston and latch nut with the outer sleeve for retrieval along with the mandrel from the well bore

Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine.

Science.gov (United States)

Sun, Yajuan; Soh, Siowling

2015-12-16

Personalizing the release profiles of drugs is important for different people with different medical and biological conditions. A technically simple and low-cost method to fabricate fully customizable tablets that can deliver drugs with any type of release profile is described. The customization is intuitively straightforward: the desired profile can simply be "drawn" and printed by a 3D printer. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Kinetic models for the release of the anticancer drug doxorubicin from biodegradable polylactide/metal oxide-based hybrids

CSIR Research Space (South Africa)

Mhlanga, N

2015-01-01

Full Text Available For decades, studies on drug-release kinetics have been an important topic in the field of drug delivery because they provide important insights into the mechanism of drug release from carriers. In this work, polylactide (PLA), doxorubicin (DOX...

Patient-important outcomes in randomized controlled trials in critically ill patients: a systematic review.

Science.gov (United States)

Gaudry, Stéphane; Messika, Jonathan; Ricard, Jean-Damien; Guillo, Sylvie; Pasquet, Blandine; Dubief, Emeline; Boukertouta, Tanissia; Dreyfuss, Didier; Tubach, Florence

2017-12-01

Intensivists' clinical decision making pursues two main goals for patients: to decrease mortality and to improve quality of life and functional status in survivors. Patient-important outcomes are gaining wide acceptance in most fields of clinical research. We sought to systematically review how well patient-important outcomes are reported in published randomized controlled trials (RCTs) in critically ill patients. Literature search was conducted to identify eligible trials indexed from January to December 2013. Articles were eligible if they reported an RCT involving critically ill adult patients. We excluded phase II, pilot and physiological crossover studies. We assessed study characteristics. All primary and secondary outcomes were collected, described and classified using six categories of outcomes including patient-important outcomes (involving mortality at any time on the one hand and quality of life, functional/cognitive/neurological outcomes assessed after ICU discharge on the other). Of the 716 articles retrieved in 2013, 112 RCTs met the inclusion criteria. Most common topics were mechanical ventilation (27%), sepsis (19%) and nutrition (17%). Among the 112 primary outcomes, 27 (24%) were patient-important outcomes (mainly mortality, 21/27) but only six (5%) were patient-important outcomes besides mortality assessed after ICU discharge (functional disability = 4; quality of life = 2). Among the 598 secondary outcomes, 133 (22%) were patient-important outcomes (mainly mortality, 92/133) but only 41 (7%) were patient-important outcomes besides mortality assessed after ICU discharge (quality of life = 20, functional disability = 14; neurological/cognitive performance = 5; handicap = 1; post-traumatic stress = 1). Seventy-three RCTs (65%) reported at least one patient-important outcome but only 11 (10%) reported at least one patient-important outcome besides mortality assessed after ICU discharge. Patient-important outcomes are rarely primary

IOLOGICAL IMPORTANCE AND TOXICITY OF HEAVY METALS FOR BIOTA OF FRESHWATER BODIES (REVIEW

Directory of Open Access Journals (Sweden)

I. Hrytsyniak

2014-06-01

Full Text Available Purpose. To investigate the sources of scientific information on biological functions of heavy metals (Fe, Zn, Mn, Cu, Ni, Co, Pb, Cd and their negative effect on biota of fresh water bodies. Findings. A review of works of a variety of scientists showed that the majority of the studied heavy metals (Fe, Zn, Mn, Cum and Co played an important role in vital functions of freshwater organisms. The significance of other studied heavy metals (Ni, Pb, and Cd is probable or unknown. Besides biological importance, we also know about toxicity of heavy metals – a group of mineral polluting substances, which are the most distributed and dangerous for biota. Their negative effect includes drastic deterioration of conditions for existence of the majority of aquatic organisms, some species disappear, others reduce their number, components of trophic chains are lost, links in ecosystems become broken, and productivity of biocenoses decreases. Practical value. An array of generalized information will be useful for scientists who investigate freshwater ecosystems and effect of toxicants on them, in particular heavy metals.

Extended release formulations for local anaesthetic agents.

Science.gov (United States)

Weiniger, C F; Golovanevski, L; Domb, A J; Ickowicz, D

2012-08-01

Systemic toxicity through overdose of local anaesthetic agents is a real concern. By encapsulating local anaesthetics in biodegradable carriers to produce a system for prolonged release, their duration of action can be extended. This encapsulation should also improve the safety profile of the local anaesthetic as it is released at a slower rate. Work with naturally occurring local anaestheticss has also shown promise in the area of reducing systemic and neurotoxicity. Extended duration local anaesthetic formulations in current development or clinical use include liposomes, hydrophobic based polymer particles such as Poly(lactic-co-glycolic acid) microspheres, pasty injectable and solid polymers like Poly(sebacic-co-ricinoleic acid) P(SA:RA) and their combination with synthetic and natural local anaesthetic. Their duration of action, rationale and limitations are reviewed. Direct comparison of the different agents is limited by their chemical properties, the drug doses encapsulated and the details of in vivo models described. Anaesthesia © 2012 The Association of Anaesthetists of Great Britain and Ireland.

One-dimensional drug release from finite Menger sponges: In silico simulation

Energy Technology Data Exchange (ETDEWEB)

Villalobos, Rafael [Division de Estudios de Posgrado (Tecnologia Farmaceutica), Facultad de Estudios Superiores Cuautitlan, Universidad Nacional Autonoma de Mexico, Av. Primero de Mayo S/N, Cuautitlan Izcalli 54740, Estado de Mexico (Mexico)], E-mail: yeccanv@yahoo.com; Dominguez, Armando [UAM-Iztapalapa, Depto. de Quimica, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico City (Mexico); Ganem, Adriana [Division de Estudios de Posgrado (Tecnologia Farmaceutica), Facultad de Estudios Superiores Cuautitlan, Universidad Nacional Autonoma de Mexico, Av. Primero de Mayo S/N, Cuautitlan Izcalli 54740, Estado de Mexico (Mexico); Vidales, Ana Maria [Laboratorio de Ciencia de Superficies y Medios Porosos, Departamento de Fisica, CONICET, Universidad Nacional de San Luis, 5700 San Luis (Argentina); Cordero, Salomon [UAM-Iztapalapa, Depto. de Quimica, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico City (Mexico)

2009-12-15

The purpose of this work was to evaluate the consequences of the spatial distribution of components in pharmaceutical matrices type Menger sponge on the drug release kinetic from this kind of platforms by means of Monte Carlo computer simulation. First, six kinds of Menger sponges (porous fractal structures) with the same fractal dimension, d{sub f}=2.727, but with different random walk dimension, d{sub w} element of [2.149,3.183], were constructed as models of drug release device. Later, Monte Carlo simulation was used to describe drug release from these structures as a diffusion-controlled process. The obtained results show that drug release from Menger sponges is characterized by an anomalous behavior: there are important effects of the microstructure anisotropy, and porous structures with the same fractal dimension but with different topology produce different release profiles. Moreover, the drug release kinetic from heteromorphic structures depends on the axis used to transport the material to the external medium. Finally, it was shown that the number of releasing sites on the matrix surface has a significant impact on drug release behavior and it can be described quantitatively by the Weibull function.

One-dimensional drug release from finite Menger sponges: In silico simulation

International Nuclear Information System (INIS)

Villalobos, Rafael; Dominguez, Armando; Ganem, Adriana; Vidales, Ana Maria; Cordero, Salomon

2009-01-01

The purpose of this work was to evaluate the consequences of the spatial distribution of components in pharmaceutical matrices type Menger sponge on the drug release kinetic from this kind of platforms by means of Monte Carlo computer simulation. First, six kinds of Menger sponges (porous fractal structures) with the same fractal dimension, d f =2.727, but with different random walk dimension, d w element of [2.149,3.183], were constructed as models of drug release device. Later, Monte Carlo simulation was used to describe drug release from these structures as a diffusion-controlled process. The obtained results show that drug release from Menger sponges is characterized by an anomalous behavior: there are important effects of the microstructure anisotropy, and porous structures with the same fractal dimension but with different topology produce different release profiles. Moreover, the drug release kinetic from heteromorphic structures depends on the axis used to transport the material to the external medium. Finally, it was shown that the number of releasing sites on the matrix surface has a significant impact on drug release behavior and it can be described quantitatively by the Weibull function.

Review of uncertainty estimates associated with models for assessing the impact of breeder reactor radioactivity releases

International Nuclear Information System (INIS)

Miller, C.; Little, C.A.

1982-08-01

The purpose is to summarize estimates based on currently available data of the uncertainty associated with radiological assessment models. The models being examined herein are those recommended previously for use in breeder reactor assessments. Uncertainty estimates are presented for models of atmospheric and hydrologic transport, terrestrial and aquatic food-chain bioaccumulation, and internal and external dosimetry. Both long-term and short-term release conditions are discussed. The uncertainty estimates presented in this report indicate that, for many sites, generic models and representative parameter values may be used to calculate doses from annual average radionuclide releases when these calculated doses are on the order of one-tenth or less of a relevant dose limit. For short-term, accidental releases, especially those from breeder reactors located in sites dominated by complex terrain and/or coastal meteorology, the uncertainty in the dose calculations may be much larger than an order of magnitude. As a result, it may be necessary to incorporate site-specific information into the dose calculation under these circumstances to reduce this uncertainty. However, even using site-specific information, natural variability and the uncertainties in the dose conversion factor will likely result in an overall uncertainty of greater than an order of magnitude for predictions of dose or concentration in environmental media following shortterm releases

Application of reaction type of C-peptide release test in diabetes mellitus

International Nuclear Information System (INIS)

Chen Dong; Duan Wenruo; He Juan; Lu Zhenfang

2001-01-01

The author is to confirm the effect of C-peptide release test and types of release reaction in appraisal of pancreas function of β-cell and selection of treatment for diabetes mellitus (DM) patients. The serum C-peptide release test of 67 normal controls and 217 DM patients were determined by RIA, and the results were analyzed and compared. C-peptide release test can reflect the pancreas function of β-cell better, the peak of C-peptide ≥ 0.6 nmol/L after lunch can be the limit of whether to reduce the level of blood glucose only by oral drug. The authors should adjust the treatment through analyzing the type of C-peptide release reaction. C-peptide release test is very important in evaluating the pancreas function of β-cell, classifying the type of DM and selecting the treatment

Import market penetration in services

OpenAIRE

Langhammer, Rolf J.

1991-01-01

The EC-1992 programme foresees the complete liberalization of trade in services among member countries. To what extent has import market penetration in the Community already begun in selected service industries? Which EC member countries have been the forerunners to date? The following paper uses a new data base released recently by EUROSTAT in an attempt to answer these and other related questions.

Large scientific releases

International Nuclear Information System (INIS)

Pongratz, M.B.

1981-01-01

The motivation for active experiments in space is considered, taking into account the use of active techniques to obtain a better understanding of the natural space environment, the utilization of the advantages of space as a laboratory to study fundamental plasma physics, and the employment of active techniques to determine the magnitude, degree, and consequences of artificial modification of the space environment. It is pointed out that mass-injection experiments in space plasmas began about twenty years ago with the Project Firefly releases. Attention is given to mass-release techniques and diagnostics, operational aspects of mass release active experiments, the active observation of mass release experiments, active perturbation mass release experiments, simulating an artificial modification of the space environment, and active experiments to study fundamental plasma physics

Modeling of molten core-concrete interactions and fission-product release

International Nuclear Information System (INIS)

Norkus, J.K.; Corradini, M.L.

1991-09-01

The study of molten core-concrete interaction is important in estimating the possible consequences of a severe nuclear reactor accident. CORCON-Mod2 is a computer program which models the thermal, chemical, and physical phenomena associated with molten core-concrete interactions. Models have been added to extend and improve the modeling of these phenomena. An ideal solution chemical equilibrium methodology is presented to predict the fission-product vaporization release. Additional chemical species have been added, and the calculation of chemical equilibrium has been expanded to the oxidic layer and to the mixed layer configuration. Recent experiments performed at Argonne National Laboratory are compared to CORCON predictions of melt temperature, erosion depth, and release fraction of fission products. The results consistently underpredicted the melt temperatures and erosion rates. However, the predictions of release of Te, Ba, Sr, and U were good. A sensitivity study of the effects of initial temperature, concrete type, use of the mixing option, degree of zirconium oxidation, cavity size, and amount of control material on erosion, gas production, and release of radioactive materials was performed for a PWR and a BWR. The initial melt temperature had the greatest effect on the results of interest. Concrete type and cavity size also had important effects. 78 refs., 35 figs., 40 tabs

Aspects of dopamine and acetylcholine release induced by glutamate receptors

International Nuclear Information System (INIS)

Paes, Paulo Cesar de Arruda

2002-01-01

The basal ganglia play an important role in the motor control of rats and humans. This control involves different neurotransmitters and the mutual control of these key elements has been subject to several studies. In this work we determined the role of glutamate on the release of radioactively labelled dopamine and acetylcholine from chopped striatal tissue in vitro. The values of Effective Concentration 50% for glutamate, NMDA, kainic, quisqualic acids and AMPA on the release of dopamine and acetylcholine were obtained. The inhibitory effects of magnesium, tetrodotoxin, MK-801, AP5 and MCPG, as well as the effects of glycin were evaluated. The results suggested that dopamine is influenced by the NMDA type glutamate receptor while acetylcholine seems to be influenced by NMDA, kainate and AMPA receptors. Tetrodotoxin experiments suggested that kainate receptors are both present in cholinergic terminals and cell bodies while AMPA and NMDA receptors are preferentially distributed in cell bodies. Magnesium effectively blocked the NMDA stimulation and unexpectedly also AMPA- and quisqualate-induced acetylcholine release. The latter could not be blocked by MCPG ruling out the participation of methabotropic receptors. MK-801 also blocked NMDA-receptors. Results point out the importance of the glutamic acid control of dopamine and acetylcholine release in striatal tissue. (author)

Stimulatory effects of neuronally released norepinephrine on renin release in vitro

Energy Technology Data Exchange (ETDEWEB)

Matsumura, Yasuo; Kawazoe, Shinka; Ichihara, Toshio; Shinyama, Hiroshi; Kageyama, Masaaki; Morimoto, Shiro (Osaka Univ. of Pharmaceutical Sciences (Japan))

1988-10-01

Extracellular high potassium inhibits renin release in vitro by increasing calcium concentrations in the juxtaglomerular cells. The authors found that the decreased response of renin release from rat kidney cortical slices in high potassium solution changed to a strikingly increased one in the presence of nifedipine at doses over 10{sup {minus}6} M. They then examined the stimulatory effect of extracellular high potassium in the presence of nifedipine on renin release. The enhancement of release was significantly suppressed either by propranolol or by metoprolol but not by prazosin. High potassium plus nifedipine-induced increase in renin release was markedly attenuated by renal denervation. The enhancing effect was not observed when the slices were incubated in calcium-free medium. Divalent cations such as Cd{sup 2+}, Co{sup 2+}, and Mn{sup 2+} blocked this enhancement in a concentration-dependent manner. High potassium elicited an increase in {sup 3}H efflux from the slices preloaded with ({sup 3}H)-norepinephrine. The increasing effect was not influenced by nifedipine but was abolished by the removal of extracellular calcium or by the addition of divalent cations. These observations suggest to us that the high potassium plus nifedipine-induced increase in renin release from the slices is mediated by norepinephrine derived from renal sympathetic nerves and that this neuronally released norepinephrine stimulates renin release via activation of {beta}-adrenoceptors.

Controlled release and intracellular protein delivery from mesoporous silica nanoparticles.

Science.gov (United States)

Deodhar, Gauri V; Adams, Marisa L; Trewyn, Brian G

2017-01-01

Protein therapeutics are promising candidates for disease treatment due to their high specificity and minimal adverse side effects; however, targeted protein delivery to specific sites has proven challenging. Mesoporous silica nanoparticles (MSN) have demonstrated to be ideal candidates for this application, given their high loading capacity, biocompatibility, and ability to protect host molecules from degradation. These materials exhibit tunable pore sizes, shapes and volumes, and surfaces which can be easily functionalized. This serves to control the movement of molecules in and out of the pores, thus entrapping guest molecules until a specific stimulus triggers release. In this review, we will cover the benefits of using MSN as protein therapeutic carriers, demonstrating that there is great diversity in the ways MSN can be used to service proteins. Methods for controlling the physical dimensions of pores via synthetic conditions, applications of therapeutic protein loaded MSN materials in cancer therapies, delivering protein loaded MSN materials to plant cells using biolistic methods, and common stimuli-responsive functionalities will be discussed. New and exciting strategies for controlled release and manipulation of proteins are also covered in this review. While research in this area has advanced substantially, we conclude this review with future challenges to be tackled by the scientific community. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Controlled release of biofunctional substances by radiation-induced polymerization

International Nuclear Information System (INIS)

Yoshida, M.; Kumakura, M.; Kaetsu, I.

1978-01-01

The controlled release of potassium chloride from flat circular matrices made by radiation-induced polymerization of a glass-forming monomer at low temperatures has been studied. The water-particle phase content formed in a poly(diethylene glycol dimethacrylate) matrix was controlled by the addition of polyethylene glycol 600. The dispersed water-particle phase content in the matrix was estimated directly and by scanning electron microscopic observations. The release of potassium chloride from the matrix increased linearly with the square root of time. The water content of the matrix had an important effect on the release rate which increases roughly in proportion to water content. This effect can be attributed to the apparent increase of the rate of drug diffusion. (author)

Pharmacological and clinical evidence of nevirapine immediate- and extended-release formulations

Directory of Open Access Journals (Sweden)

Ena J

2012-11-01

Full Text Available Javier Ena, Concepción Amador, Conxa Benito, Francisco PasquauHIV Unit, Hospital Marina Baixa, Villajoyosa, SpainAbstract: We reviewed the current information available on nevirapine immediate- and extended-release formulations and its role in single-dose and combination antiretroviral therapy. Nevirapine was approved in 1996 and was the first non-nucleoside reverse-transcriptase inhibitor available for the treatment of HIV-1 infection. Nevirapine has demonstrated good efficacy and a well-characterized safety profile. A major drawback is the low genetic barrier, allowing the emergence of resistance in the presence of single mutations in the reverse-transcriptase gene. This shortcoming is particularly relevant when nevirapine is administered in a single dose to prevent mother-to-child transmission of HIV-1 infection, compromising the efficacy of future non-nucleoside reverse transcriptase–inhibitor regimens. Studies published recently have probed the noninferiority of nevirapine compared to ritonavir-boosted atazanavir with both tenofovir disoproxil fumarate and emtricitabine in antiretroviral treatment–naïve patients. In 2011, a new formulation of nevirapine (nevirapine extended release that allowed once-daily dosing was approved by the Food and Drug Administration and by the European Medicines Agency. VERxVe, a study comparing nevirapine extended release with nevirapine immediate release in antiretroviral treatment–naïve patients, and TRANxITION, a study carried out in antiretroviral treatment–experienced patients who switched therapy from nevirapine immediate release to nevirapine extended release, provided data on the noninferiority of the new formulation of nevirapine compared with nevirapine immediate release in terms of efficacy and safety. Nevirapine extended release will further increase the durability and persistence of nevirapine-containing antiretroviral therapy, allowing once-daily dosing regimens.Keywords: nevirapine

Revised guidance on reporting of offshore hydrocarbon releases

International Nuclear Information System (INIS)

1996-11-01

The application offshore of the Reporting of Injuries, Disease and Dangerous Occurrences Regulations 1995 (RIDDOR 1995) has resulted in a new statutory reporting form. The definitions in RIDDOR 95 covering offshore hydrocarbon releases have been slightly revised, making it necessary to revise the guidance on reporting of offshore hydrocarbon releases. RIDDOR 1995 does not affect the existing voluntary arrangements for completion of forms. The receipt of correctly completed forms is important to ensure good output data from the database, and the guidance contained in this document is therefore aimed at assisting completion of the voluntary form. (UK)

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (Interagency Science Consultation Draft)

Science.gov (United States)

In September 2016, EPA released the draft IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) for public comment and discussion. The draft assessment was reviewed internally by EPA and by other federal agencies and White House Offices before public release. Consistent ...

Review of actinide decorporation with chelating agents

Energy Technology Data Exchange (ETDEWEB)

Ansoborlo, E. [CEA Valrho, Dir. de l' Energie Nucleaire (DEN/DRCP/CETAMA), 30 - Marcoule (France); Amekraz, B.; Moulin, Ch. [CEA Saclay, Dept. de Physico-Chimie (DEN/DPC/SECR), 91 - Gif sur Yvette (France); Moulin, V. [CEA Saclay, Dir. du Developpement et de l' Innovation Nucleares (DEN/DDIN/MR), 91 - Gif Sur Yvette (France); Taran, F. [CEA Saclay (DSV/DBJC/SMMCB), 91 - Gif-sur-Yvette (France); Bailly, Th.; Burgada, R. [Centre National de la Recherche Scientifique (CNRS/LCSB/UMR 7033), 93 - Bobigny (France); Henge-Napoli, M.H. [CEA Valrho, Site de Marcoule (INSTN), 30 (France); Jeanson, A.; Den Auwer, Ch.; Bonin, L.; Moisy, Ph. [CEA Valrho, Dir. de l' Energie Nucleaire (DEN/DRCP/SCPS), 30 - Marcoule (France)

2007-10-15

In case of accidental release of radionuclides in a nuclear facility or in the environment, internal contamination (inhalation, ingestion or wound) with actinides represents a severe health risk to human beings. It is therefore important to provide effective chelation therapy or decorporation to reduce acute radiation damage, chemical toxicity, and late radiation effects. Speciation governs bioavailability and toxicity of elements and it is a prerequisite tool for the design and success of new ligands or chelating agents. The purpose of this review is to present the state-of-the-art of actinide decorporation within biological media, to recall briefly actinide metabolism, to list the basic constraints of actinide-ligand for development, to describe main tools developed and used for decorporation studies, to review mainly the chelating agents tested for actinides, and finally to conclude on the future trends in this field. (authors)

Obstructive acute abdomen: reviewing important points

International Nuclear Information System (INIS)

Francisco, Marina Celli; Abud, Thiago Giansante; Reibscheid, Samuel; Szejnfeld, Jacob; Lederman, Henrique Manoel; Colleone Neto, Ramiro

2008-01-01

The obstructive acute abdomen is a common presentation, for which safe and effective management depends on a fast and accurate diagnosis. Conventional radiograph remains the first choice among the imaging exams because of its availability, low cost and the possibility to be done serially to follow the patient's clinical progression. The ultrasonography does not require ionizing radiation. It is a dynamic and in realtime exam. Computed tomography is used increasingly due to the provision of essential diagnostic information not apparent from radiographs, such as the confirmation of the obstruction, degree and place of the occlusion, presence of ischemia as well as the causes of the obstruction. Magnetic resonance imaging has presented great technological advances and it may play a role in the future of obstructive acute abdomen diagnosis. The objective of this pictorial essay is to review the different imaging techniques used on diagnosing obstructive acute abdomen. (author)

A mixed method thematic review: the importance of hope to the dying patient.

Science.gov (United States)

Broadhurst, Kathleen; Harrington, Ann

2016-01-01

To review the literature and investigate the meaning of hope to patients receiving palliative care and to examine the themes that foster hope in those patients. Hope is often linked to the future and is a significant factor for patients dealing with adversity, such as a terminal illness. The concept of hope is underreported in the literature. Mixed method thematic review. CINAHL, Scopus, PsychINFO, Informit, PubMed, Science Direct, ProQuest, Web of Science and Google Scholar online databases were searched using keywords and inclusion and exclusion criteria published between 2003-2013. Twelve qualitative articles were thematically analysed using Braun and Clarke's (2006) steps to ascertain major themes and sub-themes. On analysis, the remaining three mixed method studies were found to reflect the themes generated by the qualitative studies. Seven key themes that increased hope were found: disease status; positive personal relationships; positive character traits; quality of life; setting and achieving goals; spirituality/religion; and hope after death. The importance of hope to dying patients was established. Hope is a very complex and personal phenomena requiring hope-enhancing strategies to be individualized. More research is needed with groups whose culture, youth or type of illness may affect their ability to foster and maintain hope. © 2015 John Wiley & Sons Ltd.

What factors influence the decisions of mental health professionals to release service users from seclusion?

Science.gov (United States)

Jackson, Haley; Baker, John; Berzins, Kathyrn

2018-06-22

Mental health policy stipulates seclusion should only be used as an intervention of last resort and for the minimum possible duration. Current evidence details which service users are more likely to be secluded, why they are secluded, and what influences the decision to seclude them. However, very little is known about the decision to release service users from seclusion. An integrative review was undertaken to explore the decision-making processes of mental health professionals which guide the ending of seclusion. The review used a systematic approach to gather and thematically analyse evidence within a framework approach. The twelve articles identified generated one overriding theme, maintaining safety. In addition, several subthemes emerged including the process of risk assessing which was dependent upon interaction and control, mediated by factors external to the service user such as the attitude and experience of staff and the acuity of the environment. Service users were expected to demonstrate compliance with the process ultimately ending in release and reflection. Little evidence exists regarding factors influencing mental health professionals in decisions to release service users from seclusion. There is no evidence-based risk assessment tool, and service users are not routinely involved in the decision to release them. Support from experienced professionals is vital to ensure timely release from seclusion. Greater insight into influences upon decisions to discontinue episodes may support initiatives aimed at reducing durations and use of seclusion. © 2018 Australian College of Mental Health Nurses Inc.

Review on 18{sup th} Revision of 'Notice on Export and Import of Strategic Items'

Energy Technology Data Exchange (ETDEWEB)

Jeon, Jihye; Lee, Chansuh [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2014-05-15

Nuclear Suppliers Group (NSG) has established a guideline and continued to revise it in accordance with ever-changing international situation and developing technology. The Part 1 of guideline, 'Guidelines of Nuclear Transfers' covers the Trigger List items which triggers safeguards as a condition of supply. Currently NSG has published the 12{sup th} revised guideline (INFCIRC/254/Rev.12/Part1) in November 2013. Korean government fully reflected the guideline to its national legislation to implement in accordance with internationally agreed standard. The export control of nuclear strategic items in Korea is responsibility of Nuclear Safety and Security Commission (NSSC), which entrusted the technical review of the work to Korea Institute of Nonproliferation and Control (KINAC). The specific guidelines for the technical review are stipulated in Notice on Export and Import of Strategic Items with other strategic items usable to other Weapons of Mass Destruction. The Ministry of Trade, Industry and Energy approved the 18{sup th} revision of Notice on Export and Import of Strategic Items on 31 January 2014 as Notice no. 2014-15, which strictly follows the NSG guideline. The 18{sup th} revision of the notice reflects the final proposals agreed from the last Dedicated Meeting of Technical Experts (DMTE) of NSG's Consultative Group (CG) in April 2013. The 3-year-DMTE offered the 'fundamental, holistic approach to the technical review' within the international framework of NSG, rather than sporadic endeavors by individual states in the past. The 18{sup th} version itself has meaning in that the final products of the international technical review were reflected in the Korean national legislation of nuclear export control. It addressed various changes in control text in technical, contextual, and editorial aspects. The revision is analyzed herein concentrating only on technical and semantic changes in control text.

The potential importance of water pathways for spent fuel transportation accident risk

International Nuclear Information System (INIS)

Ostmeyer, R.M.

1986-01-01

This paper analyzes the potential importance of water pathway contamination for spent fuel transportation accident risk using a ''worst-case'' water contamination scenario. The scenario used for the analysis involves an accident release that occurs near a reservoir. Water pathway doses are compared to doses for accident releases in urban or agricultural areas. The results of the analysis indicate that water pathways are not important for assessing the risk of transporting spent reactor fuel by truck or by rail

Preliminary analysis of public dose from CFETR gaseous tritium release

Energy Technology Data Exchange (ETDEWEB)

Nie, Baojie [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China); Ni, Muyi, E-mail: muyi.ni@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Lian, Chao; Jiang, Jieqiong [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2015-02-15

Highlights: • Present the amounts and limit dose of tritium release to the environment for CFETR. • Perform a preliminary simulation of radiation dose for gaseous tritium release. • Key parameters about soil types, wind speed, stability class, effective release height and age were sensitivity analyzed. • Tritium release amount is recalculated consistently with dose limit in Chinese regulation for CFETR. - Abstract: To demonstrate tritium self-sufficiency and other engineering issues, the scientific conception of Chinese Fusion Engineering Test Reactor (CFETR) has been proposed in China parallel with ITER and before DEMO reactor. Tritium environmental safety for CFETR is an important issue and must be evaluated because of the huge amounts of tritium cycling in reactor. In this work, different tritium release scenarios of CFETR and dose limit regulations in China are introduced. And the public dose is preliminarily analyzed under normal and accidental events. Furthermore, after finishing the sensitivity analysis of key input parameters, the public dose is reevaluated based on extreme parameters. Finally, tritium release amount is recalculated consistently with the dose limit in Chinese regulation for CFETR, which would provide a reference for tritium system design of CFETR.

Choosing Important Health Outcomes for Comparative Effectiveness Research: An Updated Review and Identification of Gaps.

Science.gov (United States)

Gorst, Sarah L; Gargon, Elizabeth; Clarke, Mike; Smith, Valerie; Williamson, Paula R

2016-01-01

The COMET (Core Outcome Measures in Effectiveness Trials) Initiative promotes the development and application of core outcome sets (COS), including relevant studies in an online database. In order to keep the database current, an annual search of the literature is undertaken. This study aimed to update a previous systematic review, in order to identify any further studies where a COS has been developed. Furthermore, no prioritization for COS development has previously been undertaken, therefore this study also aimed to identify COS relevant to the world's most prevalent health conditions. The methods used in this updated review followed the same approach used in the original review and the previous update. A survey was also sent to the corresponding authors of COS identified for inclusion in this review, to ascertain what lessons they had learnt from developing their COS. Additionally, the COMET database was searched to identify COS that might be relevant to the conditions with the highest global prevalence. Twenty-five reports relating to 22 new studies were eligible for inclusion in the review. Further improvements were identified in relation to the description of the scope of the COS, use of the Delphi technique, and the inclusion of patient participants within the development process. Additionally, 33 published and ongoing COS were identified for 13 of the world's most prevalent conditions. The development of a reporting guideline and minimum standards should contribute towards future improvements in development and reporting of COS. This study has also described a first approach to identifying gaps in existing COS, and to priority setting in this area. Important gaps have been identified, on the basis of global burden of disease, and the development and application of COS in these areas should be considered a priority.

Review of IAEA recommendations on the principles and methodologies for limiting releases of radioactive effluents to the environment

International Nuclear Information System (INIS)

Ahmed, J.U.

1988-01-01

The limitation of radioactive releases is governed by the basic principles of radiation protection as presented in the ICRP Publication No. 26 and IAEA Safety Series No. 9. Unter its current programme on release limitation the IAEA issued Safety Series No. 77 on principles for release limitation and Safety Series No. 67 on protection against transboundary radiation exposures. A Safety Guide on global upper bounds is now nearly ready for publication, and to guide on the application of Safety Series No. 77, four documents are in various stages of completion

Exosomes released from breast cancer carcinomas stimulate cell movement.

Directory of Open Access Journals (Sweden)

Dinari A Harris

Full Text Available For metastasis to occur cells must communicate with to their local environment to initiate growth and invasion. Exosomes have emerged as an important mediator of cell-to-cell signalling through the transfer of molecules such as mRNAs, microRNAs, and proteins between cells. Exosomes have been proposed to act as regulators of cancer progression. Here, we study the effect of exosomes on cell migration, an important step in metastasis. We performed cell migration assays, endocytosis assays, and exosome proteomic profiling on exosomes released from three breast cancer cell lines that model progressive stages of metastasis. Results from these experiments suggest: (1 exosomes promote cell migration and (2 the signal is stronger from exosomes isolated from cells with higher metastatic potentials; (3 exosomes are endocytosed at the same rate regardless of the cell type; (4 exosomes released from cells show differential enrichment of proteins with unique protein signatures of both identity and abundance. We conclude that breast cancer cells of increasing metastatic potential secrete exosomes with distinct protein signatures that proportionally increase cell movement and suggest that released exosomes could play an active role in metastasis.

PWR-GALE, Radioactive Gaseous Release and Liquid Release from PWR

International Nuclear Information System (INIS)

Chandrasekaran, T.; Lee, J.Y.; Willis, C.A.

1988-01-01

1 - Description of program or function: The PWR-GALE (Boiling Water Reactor Gaseous and Liquid Effluents) Code is a computerized mathematical model for calculating the release of radioactive material in gaseous and liquid effluents from pressurized water reactors (PWRs). The calculations are based on data generated from operating reactors, field tests, laboratory tests, and plant-specific design considerations incorporated to reduce the quantity of radioactive materials that may be released to the environment. 2 - Method of solution: GALE calculates expected releases based on 1) standardized coolant activities derived from ANS Standards 18.1 Working Group recommendations, 2) release and transport mechanisms that result in the appearance of radioactive material in liquid and gaseous waste streams, 3) plant-specific design features used to reduce the quantities of radioactive materials ultimately released to the environs, and 4) information received on the operation of nuclear power plants. 3 - Restrictions on the complexity of the problem: The liquid release portion of GALE uses subroutines taken from the ORIGEN (CCC-217) to calculate radionuclide buildup and decay during collection, processing, and storage of liquid radwaste. Memory requirements for this part of the program are determined by the large nuclear data base accessed by these subroutines

Thrombin induces rapid PAR1-mediated non-classical FGF1 release

International Nuclear Information System (INIS)

Duarte, Maria; Kolev, Vihren; Soldi, Raffaella; Kirov, Alexander; Graziani, Irene; Oliveira, Silvia Marta; Kacer, Doreen; Friesel, Robert; Maciag, Thomas; Prudovsky, Igor

2006-01-01

Thrombin induces cell proliferation and migration during vascular injury. We report that thrombin rapidly stimulated expression and release of the pro-angiogenic polypeptide fibroblast growth factor 1 (FGF1). Thrombin failed to induce FGF1 release from protease-activated receptor 1 (PAR1) null fibroblasts, indicating that this effect was dependent on PAR1. Similarly to thrombin, FGF1 expression and release were induced by TRAP, a specific oligopeptide agonist of PAR1. These results identify a novel aspect of the crosstalk between FGF and thrombin signaling pathways which both play important roles in tissue repair and angiogenesis

The importance of coughs

African Journals Online (AJOL)

2012-03-14

Mar 14, 2012 ... how important it can be. It is at best ... e. rise of intrathoracic pressure up to 200mm Hg., f. glottic opening and ... The differential diagnosis may be reviewed from knowledge .... cigarette smoking is an important example. 3.

Endoscopic release for carpal tunnel syndrome.

Science.gov (United States)

Vasiliadis, Haris S; Georgoulas, Petros; Shrier, Ian; Salanti, Georgia; Scholten, Rob J P M

2014-01-31

Carpal tunnel syndrome (CTS) is the most common compressive neuropathy of the upper extremity. It is caused by increased pressure on the median nerve between the transverse carpal ligament and the carpal bones. Surgical treatment consists of the release of the nerve by cutting the transverse carpal ligament. This can be done either with an open approach or endoscopically. To assess the effectiveness and safety of the endoscopic techniques of carpal tunnel release compared to any other surgical intervention for the treatment of CTS. More specifically, to evaluate the relative impact of endoscopic techniques in relieving symptoms, producing functional recovery (return to work and return to daily activities) and reducing complication rates. This review fully incorporates the results of searches conducted up to 5 November 2012, when we searched the Cochrane Neuromuscular Disease Group Specialized Register, CENTRAL, MEDLINE and EMBASE. There were no language restrictions. We reviewed the reference lists of relevant articles and contacted trial authors. We also searched trial registers for ongoing trials. We performed a preliminary screen of searches to November 2013 to identify any additional recent publications. We included any randomised controlled trials (RCTs) and quasi-RCTs comparing endoscopic carpal tunnel release (ECTR) with any other surgical intervention for the treatment of CTS. We used standard methodological procedures expected by the Cochrane Collaboration. Twenty-eight studies (2586 hands) were included. Twenty-three studies compared ECTR to standard open carpal tunnel release (OCTR), five studies compared ECTR with OCTR using a modified incision, and two studies used a three-arm design to compare ECTR, standard OCTR and modified OCTR.At short-term follow-up (three months or less), only one study provided data for overall improvement. We found no differences on the Symptom Severity Scale (SSS) (scale zero to five) (five studies, standardised mean

Gonadotrophin-Releasing Hormone Agonists and Other Contraceptive Medications in Exotic Companion Animals.

Science.gov (United States)

Schoemaker, Nico J

2018-05-01

The use of a gonadotrophin-releasing hormone agonist slow-release implant (GnRH A-SRI) has become increasingly popular as an alternative for surgical contraception in many species. Although these implants have proven to be very effective in some species (eg, ferrets, rats, chicken, psittacines, and iguanas), they have been found less effective in other species (eg, male guinea pigs and rabbits, veiled chameleons, slider turtles, and leopard geckos). This review provides an overview of the available literature on the effects of GnRH A-SRIs in companion exotic animals. Copyright © 2018 Elsevier Inc. All rights reserved.

Extracellular ATP in the Exocrine Pancreas – ATP Release, Signalling and Metabolism

DEFF Research Database (Denmark)

Kowal, Justyna Magdalena

release. So far, the contribution of duct cells in purinergic signalling has never been studied. This work presents that both acinar and duct cells are sources of extracellular ATP in the exocrine pancreas. Here we show that duct cells release ATP in response to several physiological......ATP plays an important role as an autocrine/paracrine signalling molecule, being released from a number of tissues, in response to physiological and pathophysiological stimuli. Released ATP induces Ca2+ - and/or cAMP - dependent cellular responses via activation of ubiquitously expressed P2X and P2......, particularly during Ca2+ stress conditions. In conclusion, these studies demonstrate a complex regulation of purinergic signalling in exocrine pancreas. A crucial role for duct cells in mediating extracellular nucleotides homeostasis, involving ATP release, subsequent hydrolysis and conversion via...

Pore geometry of ceramic device: The key factor of drug release kinetics

Directory of Open Access Journals (Sweden)

Čolović B.

2013-01-01

Full Text Available Release kinetics of tigecycline, a potential antibiotic in treatment of osteomyelitis, from calcium hydroxyapatite (CHA, as one of the most important ceramic materials in bone tissue engineering, was investigated in this study. Tigecycline, in solid state, was mixed with CHA powder and the obtained mixture was compressed into tablets using two different pressures. These tablets were immersed in a phosphate-buffered saline solution and tigecycline release was measured by a UV-VIS spectrophotometer. The total release time was 5 or 28 days, depending on the pressure applied during compression. It was shown that there is a close relationship between pore sizes and drug release rate. The drug release kinetics was interpreted on the base of pore sizes and pore size distribution. [Projekat Ministarstva nauke Republike Srbije, br. 172026

Optimization of ISOL targets based on Monte-Carlo simulations of ion release curves

International Nuclear Information System (INIS)

Mustapha, B.; Nolen, J.A.

2003-01-01

A detailed model for simulating release curves from ISOL targets has been developed. The full 3D geometry is implemented using Geant-4. Produced particles are followed individually from production to release. The delay time is computed event by event. All processes involved: diffusion, effusion and decay are included to obtain the overall release curve. By fitting to the experimental data, important parameters of the release process (diffusion coefficient, sticking time, ...) are extracted. They can be used to improve the efficiency of existing targets and design new ones more suitable to produce beams of rare isotopes

Optimization of ISOL targets based on Monte-Carlo simulations of ion release curves

CERN Document Server

Mustapha, B

2003-01-01

A detailed model for simulating release curves from ISOL targets has been developed. The full 3D geometry is implemented using Geant-4. Produced particles are followed individually from production to release. The delay time is computed event by event. All processes involved: diffusion, effusion and decay are included to obtain the overall release curve. By fitting to the experimental data, important parameters of the release process (diffusion coefficient, sticking time, ...) are extracted. They can be used to improve the efficiency of existing targets and design new ones more suitable to produce beams of rare isotopes.

Importance of Recognizing Carpal Tunnel Syndrome for Neurosurgeons: A Review.

Science.gov (United States)

Yunoki, Masatoshi; Kanda, Takahiro; Suzuki, Kenta; Uneda, Atsuhito; Hirashita, Koji; Yoshino, Kimihiro

2017-04-15

Idiopathic carpal tunnel syndrome (CTS) is a common complaint, reflecting entrapment neuropathy of the upper extremity. CTS produces symptoms similar to those of other conditions, such as cervical spondylosis or ischemic or neoplastic intracranial disease. Because of these overlaps, patients with CTS are often referred to a neurosurgeon. Surgical treatment of CTS was started recently in our department. Through this experience, we realized that neurosurgeons should have an increased awareness of this condition so they can knowledgeably assess patients with a differential diagnosis that includes CTS and cervical spinal and cerebral disease. We conducted a literature review to gain the information needed to summarize current knowledge on the clinical, pathogenetic, and therapeutic aspects of CTS. Because the optimal diagnostic criteria for this disease are still undetermined, its diagnosis is based on the patient's history and physical examination, which should be confirmed by nerve conduction studies and imaging modalities such as magnetic resonance imaging and ultrasonography. Treatment methods include observation, medication, splinting, steroid injections, and surgical intervention. Understanding the clinical features and pathogenesis of CTS, as well as the therapeutic options available to treat it, is important for neurosurgeons if they are to provide the correct management of patients with this disease.

Biological implications of radionuclides released from nuclear industries

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-08-15

The development of nuclear power technologies has led to a rapid increase in the number of reactors and other installations including fuel reprocessing and radioactive waste treatment plants in operation. Associated with these developments are the concomitant possibilities for release of radionuclides in the environment, which in turn might exert some biological impacts including late somatic and genetic effects on man. The principal objective of the Agency's symposium was, therefore, to review critically the current information on the biological effects of exposure to low levels of incorporated radionuclides and the radiation doses absorbed from them. The purpose of this review was to provide a sound scientific basis on which to evaluate radiation safety standards, risk-benefit analysis, as well as the regulatory control and management of nuclear wastes. The major part of the discussions centered around the problems of the radiobiology, radio-oncology, radio-ecology and toxicology of the transuranic such as such as plutonium, americium, curium as well as radionuclide species like tritium, krypton and iodine among others, which are expected to be released from these nuclear installations. Current data and practical information obtained through suitably designed animal studies and also from epidemiological, ecological and food-chain analyses and other relevant follow-up surveys of late effects in accidentally exposed occupational personnel were reported for discussion and risk evaluation.

Release of RANKERN 16A

Directory of Open Access Journals (Sweden)

Bird Adam

2017-01-01

Full Text Available RANKERN 16 is the latest version of the point-kernel gamma radiation transport Monte Carlo code from AMEC Foster Wheeler’s ANSWERS Software Service. RANKERN is well established in the UK shielding community for radiation shielding and dosimetry assessments. Many important developments have been made available to users in this latest release of RANKERN. The existing general 3D geometry capability has been extended to include import of CAD files in the IGES format providing efficient full CAD modelling capability without geometric approximation. Import of tetrahedral mesh and polygon surface formats has also been provided. An efficient voxel geometry type has been added suitable for representing CT data. There have been numerous input syntax enhancements and an extended actinide gamma source library. This paper describes some of the new features and compares the performance of the new geometry capabilities.

Release of RANKERN 16A

Science.gov (United States)

Bird, Adam; Murphy, Christophe; Dobson, Geoff

2017-09-01

RANKERN 16 is the latest version of the point-kernel gamma radiation transport Monte Carlo code from AMEC Foster Wheeler's ANSWERS Software Service. RANKERN is well established in the UK shielding community for radiation shielding and dosimetry assessments. Many important developments have been made available to users in this latest release of RANKERN. The existing general 3D geometry capability has been extended to include import of CAD files in the IGES format providing efficient full CAD modelling capability without geometric approximation. Import of tetrahedral mesh and polygon surface formats has also been provided. An efficient voxel geometry type has been added suitable for representing CT data. There have been numerous input syntax enhancements and an extended actinide gamma source library. This paper describes some of the new features and compares the performance of the new geometry capabilities.

IRIS Toxicological Review of Acrolein (2003 Final)

Science.gov (United States)

EPA announced the release of the final report, Toxicological Review of Acrolein: in support of the Integrated Risk Information System (IRIS). The updated Summary for Acrolein and accompanying toxicological review have been added to the IRIS Database.

Review of SFR In-Vessel Radiological Source Term Studies

International Nuclear Information System (INIS)

Suk, Soo Dong; Lee, Yong Bum

2008-10-01

An effort has been made in this study to search for and review the literatures in public domain on the studies of the phenomena related to the release of radionuclides and aerosols to the reactor containment of the sodium fast reactor (SFR) plants (i.e., in-vessel source term), made in Japan and Europe including France, Germany and UK over the last few decades. Review work is focused on the experimental programs to investigate the phenomena related to determining the source terms, with a brief review on supporting analytical models and computer programs. In this report, the research programs conducted to investigate the CDA (core disruptive accident) bubble behavior in the sodium pool for determining 'primary' or 'instantaneous' source term are first introduced. The studies performed to determine 'delayed source term' are then described, including the various stages of phenomena and processes: fission product (FP) release from fuel , evaporation release from the surface of the pool, iodine mass transfer from fission gas bubble, FP deposition , and aerosol release from core-concrete interaction. The research programs to investigate the release and transport of FPs and aerosols in the reactor containment (i.e., in-containment source term) are not described in this report

Importance of individual fission nuclide to incontainment radioactive reading during PWR accidents

International Nuclear Information System (INIS)

Li Junfeng; Shi Zhongqi

2004-01-01

Containment radiation level is one of the most important base for core damage assessment and protective actions recommendation during accidents. Incontainment radioactive reading calculations is the precondition of using this kind of method. Importance of individual nuclides were compared during normal coolant release, gap release and core melt. Conclusions are deduced that when the spray is off, the radioactive reading in containment is mainly from iodine and noble gas, and the spray is on, the radioactive reading is mainly from noble gas. (authors)

Flash release an alternative for releasing complex MEMS devices

NARCIS (Netherlands)

Deladi, S.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

2004-01-01

A novel time-saving and cost-effective release technique has been developed and is described. The physical nature of the process is explained in combination with experimental observations. The results of the flash release process are compared with those of freeze-drying and supercritical CO2

Simulated food effects on drug release from ethylcellulose: PVA-PEG graft copolymer-coated pellets.

Science.gov (United States)

Muschert, Susanne; Siepmann, Florence; Leclercq, Bruno; Carlin, Brian; Siepmann, Juergen

2010-02-01

Food effects might substantially alter drug release from oral controlled release dosage forms in vivo. The robustness of a novel type of controlled release film coating was investigated using various types of release media and two types of release apparatii. Importantly, none of the investigated conditions had a noteworthy impact on the release of freely water-soluble diltiazem HCl or slightly water-soluble theophylline from pellets coated with ethylcellulose containing small amounts of PVA-PEG graft copolymer. In particular, the presence of significant amounts of fats, carbohydrates, surfactants, bile salts, and calcium ions in the release medium did not alter drug release. Furthermore, changes in the pH and differences in the mechanical stress the dosage forms were exposed to did not affect drug release from the pellets. The investigated film coatings allowing for oral controlled drug delivery are highly robust in vitro and likely to be poorly sensitive to classical food effects in vivo.

Radiological accidents potentially important to human health risk in the U.S. Department of Energy waste management program

International Nuclear Information System (INIS)

Mueller, C.; Roglans-Ribas, J.; Folga, S.; Nabelssi, B.; Jackson, R.

1995-01-01

Human health risks as a consequence of potential radiological releases resulting from plausible accident scenarios constitute an important consideration in the US Department of Energy (DOE) national program to manage the treatment, storage, and disposal of wastes. As part of this program, the Office of Environmental Management (EM) is currently preparing a Programmatic Environmental Impact Statement (PEIS) that evaluates the risks that could result from managing five different waste types. This paper (1) briefly reviews the overall approach used to assess process and facility accidents for the EM PEIS; (2) summarizes the key inventory, storage, and treatment characteristics of the various DOE waste types important to the selection of accidents; (3) discusses in detail the key assumptions in modeling risk-dominant accidents; and (4) relates comparative source term results and sensitivities

IRIS Toxicological Review of Hexahydro-1,3,5-Trinitro-1,3,5 ...

Science.gov (United States)

The IRIS Toxicological Review of Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) was released for external peer review in September 2016. The EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting the RDX assessment and release a final report of their review. Information regarding the peer review can be found on the SAB website. EPA is undertaking an update of the Integrated Risk Information System (IRIS) health assessment for RDX. The outcome of this project is an updated Toxicological Review and IRIS Summary for RDX that will be entered into the IRIS database.

A comparison of the extended-release and standard-release formulations of tacrolimus in de novo kidney transplant recipients: a 12-month outcome study.

Science.gov (United States)

Fanous, Helen; Zheng, Rebecca; Campbell, Carolyn; Huang, Michael; Nash, Michelle M; Rapi, Lindita; Zaltzman, Jeffrey S; Prasad, G V Ramesh

2013-02-01

BACKGROUND: Limited comparative data are available on the outcomes between extended-release and standard-release tacrolimus when used de novo in kidney transplant recipients (KTRs). METHODS: We identified KTRs transplanted at our institution during 2009-10 routinely prescribed extended-release tacrolimus and compared them with those transplanted during 2008-09 prescribed standard-release tacrolimus. Graft function (eGFR by MDRD-7 equation) at 12 months post-transplant (primary outcome); new-onset diabetes and other cardiovascular risk factors, BK viremia incidence, acute rejection, and graft survival to 12 months (secondary outcomes) were compared by intent-to-treat analysis. Time-to-steady-state concentration and number of dose adjustments required to attain steady state were recorded. RESULTS: There were no important demographic differences between the extended-release (N = 106) and standard-release (N = 95) cohorts. The estimated glomerular filtration rate (eGFR) at 12 months was similar (58.8 ± 17 versus 59.2 ± 18 mL/min/1.73 m(2), P = 0.307). There was no difference in new-onset diabetes (17 versus 20%, P = 0.581), BK viremia (10 versus 7%, P = 0.450), acute rejection (7 versus 16%, P = 0.067) or graft survival (97 versus 95%, P = 0.301). Time-to-steady state was similar (9.2 ± 1.1 versus 8.1 ± 4.7 days, P = 0.490) although extended-release patients required fewer adjustments to attain steady state (1.2 ± 1.7 [0-8] versus 1.7 ± 1.5 [0-7], P = 0.030) but a similar dose (7.2 ± 2.4 [2-17] versus 7 ± 2.7 [2-16] mg/day, P = 0.697). CONCLUSION: De novo KTRs prescribed extended-release or standard-release tacrolimus demonstrate similar 12-month outcomes.

Social Laughter Triggers Endogenous Opioid Release in Humans.

Science.gov (United States)

Manninen, Sandra; Tuominen, Lauri; Dunbar, Robin I; Karjalainen, Tomi; Hirvonen, Jussi; Arponen, Eveliina; Hari, Riitta; Jääskeläinen, Iiro P; Sams, Mikko; Nummenmaa, Lauri

2017-06-21

The size of human social networks significantly exceeds the network that can be maintained by social grooming or touching in other primates. It has been proposed that endogenous opioid release after social laughter would provide a neurochemical pathway supporting long-term relationships in humans (Dunbar, 2012), yet this hypothesis currently lacks direct neurophysiological support. We used PET and the μ-opioid-receptor (MOR)-specific ligand [ 11 C]carfentanil to quantify laughter-induced endogenous opioid release in 12 healthy males. Before the social laughter scan, the subjects watched laughter-inducing comedy clips with their close friends for 30 min. Before the baseline scan, subjects spent 30 min alone in the testing room. Social laughter increased pleasurable sensations and triggered endogenous opioid release in thalamus, caudate nucleus, and anterior insula. In addition, baseline MOR availability in the cingulate and orbitofrontal cortices was associated with the rate of social laughter. In a behavioral control experiment, pain threshold-a proxy of endogenous opioidergic activation-was elevated significantly more in both male and female volunteers after watching laughter-inducing comedy versus non-laughter-inducing drama in groups. Modulation of the opioidergic activity by social laughter may be an important neurochemical pathway that supports the formation, reinforcement, and maintenance of human social bonds. SIGNIFICANCE STATEMENT Social contacts are vital to humans. The size of human social networks significantly exceeds the network that can be maintained by social grooming in other primates. Here, we used PET to show that endogenous opioid release after social laughter may provide a neurochemical mechanism supporting long-term relationships in humans. Participants were scanned twice: after a 30 min social laughter session and after spending 30 min alone in the testing room (baseline). Endogenous opioid release was stronger after laughter versus the

Modeling the release, spreading, and burning of LNG, LPG, and gasoline on water

International Nuclear Information System (INIS)

Johnson, David W.; Cornwell, John B.

2007-01-01

Current interest in the shipment of liquefied natural gas (LNG) has renewed the debate about the safety of shipping large volumes of flammable fuels. The size of a spreading pool following a release of LNG from an LNG tank ship has been the subject of numerous papers and studies dating back to the mid-1970s. Several papers have presented idealized views of how the LNG would be released and spread across a quiescent water surface. There is a considerable amount of publicly available material describing these idealized releases, but little discussion of how other flammable fuels would behave if released from similar sized ships. The purpose of this paper is to determine whether the models currently available from the United States Federal Energy Regulatory Commission (FERC) can be used to simulate the release, spreading, vaporization, and pool fire impacts for materials other than LNG, and if so, identify which material-specific parameters are required. The review of the basic equations and principles in FERC's LNG release, spreading, and burning models did not reveal a critical fault that would prevent their use in evaluating the consequences of other flammable fluid releases. With the correct physical data, the models can be used with the same level of confidence for materials such as LPG and gasoline as they are for LNG

Kepler Planet Reliability Metrics: Astrophysical Positional Probabilities for Data Release 25

Science.gov (United States)

Bryson, Stephen T.; Morton, Timothy D.

2017-01-01

This document is very similar to KSCI-19092-003, Planet Reliability Metrics: Astrophysical Positional Probabilities, which describes the previous release of the astrophysical positional probabilities for Data Release 24. The important changes for Data Release 25 are:1. The computation of the astrophysical positional probabilities uses the Data Release 25 processed pixel data for all Kepler Objects of Interest.2. Computed probabilities now have associated uncertainties, whose computation is described in x4.1.3.3. The scene modeling described in x4.1.2 uses background stars detected via ground-based high-resolution imaging, described in x5.1, that are not in the Kepler Input Catalog or UKIRT catalog. These newly detected stars are presented in Appendix B. Otherwise the text describing the algorithms and examples is largely unchanged from KSCI-19092-003.

Meteorological conditions at the release site during the two tracer experiments

DEFF Research Database (Denmark)

Gryning, Sven-Erik; Batchvarova, E.; Schneiter, D.

1998-01-01

The state of the boundary layer at the release site during the two tracer experiments is described, based on measurements of atmospheric turbulence carried our by a sonic anemometer, profiles of horizontal and vertical wind by a SODAR as well as frequent radiosonde releases. The boundary layer...... height is derived from radiosoundings, modelled and discussed. The study is meant as background for discussions of the tracer behaviour near the release site, and possible influence of the local meteorology at the release site on the long-range dispersion. The difference in the initial mese...... model development. It is concluded that the micrometeorological measurements are very important as background information for the understanding of plume behaviour on small as well as long scales. (C) 1998 Elsevier Science Ltd. All rights reserved....

Blood histamine release: A new allergy blood test

International Nuclear Information System (INIS)

Faraj, B.A.; Gottlieb, G.R.; Camp, V.M.; Lollies, P.

1985-01-01

Allergen-mediated histamine release from human leukocytes represents an important model for in vitro studies of allergic reactions. The purpose of this study was to determine whether the measurement of histamine released in allergic patients (pts) by radioenzymatic assay following mixing of their blood with common allergens represents a reliable index for diagnosis of atopic allergy. Three categories of allergies were used: (1) housedust and mite; (2) cat and dog dander; (3) trees and grasses and ragweed mixture. The presence of allergy was established by intradermal skin testing in the study group of 82 pts. Significant atopy was defined as ≥ 3+ (overall range 0-4 +, negative to maximum) on skin testing. The test was carried out in tubes with 0.5 ml heparinized blood, 0.5 ml tris albumin buffer, and one of the allergens (60-100 PNU/ml). In 20 controls without allergy, there always was ≤ 4% histamine release (normal response). A significant allergen-mediated histamine release, ranging from 12 to 30% of the total blood histamine content, was observed in 96% of the pts with skin test sensitivity of ≥ 3+. There was good agreement between skin testing and histamine release in terms of the allergen causing the response. Thus, measurement of histamine release in blood in response to allergen challenge represents a clinically useful in vitro test for the diagnosis of atopic allergy. Because data can be obtained from a single sample and are highly quantitative, this new method should have application to the longitudinal study of allergic pts and to the assessment of interventions

Mechanistic model for Sr and Ba release from severely damaged fuel

International Nuclear Information System (INIS)

Rest, J.; Cronenberg, A.W.

1985-11-01

Among radionuclides associated with fission product release during severe accidents, the primary ones with health consequences are the volatile species of I, Te, and Cs, and the next most important are Sr, Ba, and Ru. Considerable progress has been made in the mechanistic understanding of I, Cs, Te, and noble gas release; however, no capability presently exists for estimating the release of Sr, Ba, and Ru. This paper presents a description of the primary physical/chemical models recently incorporated into the FASTGRASS-VFP (volatile fission product) code for the estimation of Sr and Ba release. FASTGRASS-VFP release predictions are compared with two data sets: (1) data from out-of-reactor induction-heating experiments on declad low-burnup (1000 and 4000 MWd/t) pellets, and (2) data from the more recent in-reactor PBF Severe Fuel Damage Tests, in which one-meter-long, trace-irradiated (89 MWd/t) and normally irradiated (approx.35,000 MWd/t) fuel rods were tested under accident conditions. 10 refs

Dynamics of shear-induced ATP release from red blood cells.

Science.gov (United States)

Wan, Jiandi; Ristenpart, William D; Stone, Howard A

2008-10-28

Adenosine triphosphate (ATP) is a regulatory molecule for many cell functions, both for intracellular and, perhaps less well known, extracellular functions. An important example of the latter involves red blood cells (RBCs), which help regulate blood pressure by releasing ATP as a vasodilatory signaling molecule in response to the increased shear stress inside arterial constrictions. Although shear-induced ATP release has been observed widely and is believed to be triggered by deformation of the cell membrane, the underlying mechanosensing mechanism inside RBCs is still controversial. Here, we use an in vitro microfluidic approach to investigate the dynamics of shear-induced ATP release from human RBCs with millisecond resolution. We demonstrate that there is a sizable delay time between the onset of increased shear stress and the release of ATP. This response time decreases with shear stress, but surprisingly does not depend significantly on membrane rigidity. Furthermore, we show that even though the RBCs deform significantly in short constrictions (duration of increased stress <3 ms), no measurable ATP is released. This critical timescale is commensurate with a characteristic membrane relaxation time determined from observations of the cell deformation by using high-speed video. Taken together our results suggest a model wherein the retraction of the spectrin-actin cytoskeleton network triggers the mechanosensitive ATP release and a shear-dependent membrane viscosity controls the rate of release.

Development of theophylline sustained release dosage form based on Kollidon SR.

Science.gov (United States)

Reza, Md Selim; Quadir, Mohiuddin Abdul; Haider, Syed Shabbir

2002-01-01

Sustained release theophylline matrix tablets constituting Kollidon SR (Polyvinyl acetate and povidone based matrix retarding polymer) were developed in this study in an attempt to design a dosage form that manifests desirable release profile and thorough adherence to official monographs. Four matrix tablet formulations were prepared by dry blending and direct compression of Kollidon SR and HPMC-15cps (hydroxypropylmethylcellulose) in varying proportion with fixed percentage of theophylline. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release with an initial burst effect. Incorporation of HPMC-15cps in the matrix tablet prolonged the release of drug with subsequent minimization of burst effect as confirmed by mean dissolution time, T50 and Higuchi release rate data. Among the batches containing HPMC-15 cps, a direct relationship was obtained between release rate and the percentage of HPMC used. A suitable controlled release profile was obtained with the matrix tablets containing 20% Kollidon SR and 30% HPMC-15cps. The formulation showed close resemblance to commercial products and compliance with USP specification. The results were explored and explained by the difference of physico-chemical property and hydration characteristics of the polymers. In addition to this result, the exponential model was applied to characterize the drug release behaviour from polymeric systems. It was found that, Fickian release is predominant in tablets containing Kollidon SR alone and non-Fickian mechanism plays an important role in the release of drug from HPMC containing tablets with a trend towards zero-order or case II release. In vitro release profile of two commercial brands were also undertaken for comparison and modulation of the experimental batches.

Peroxisome protein import: a complex journey.

Science.gov (United States)

Baker, Alison; Lanyon-Hogg, Thomas; Warriner, Stuart L

2016-06-15

The import of proteins into peroxisomes possesses many unusual features such as the ability to import folded proteins, and a surprising diversity of targeting signals with differing affinities that can be recognized by the same receptor. As understanding of the structure and function of many components of the protein import machinery has grown, an increasingly complex network of factors affecting each step of the import pathway has emerged. Structural studies have revealed the presence of additional interactions between cargo proteins and the PEX5 receptor that affect import potential, with a subtle network of cargo-induced conformational changes in PEX5 being involved in the import process. Biochemical studies have also indicated an interdependence of receptor-cargo import with release of unloaded receptor from the peroxisome. Here, we provide an update on recent literature concerning mechanisms of protein import into peroxisomes. © 2016 The Author(s).

Management Strategies to Facilitate Optimal Outcomes for Patients Treated with Delayed-release Dimethyl Fumarate.

Science.gov (United States)

Mayer, Lori; Fink, Mary Kay; Sammarco, Carrie; Laing, Lisa

2018-04-01

Delayed-release dimethyl fumarate is an oral disease-modifying therapy that has demonstrated significant efficacy in adults with relapsing-remitting multiple sclerosis. Incidences of flushing and gastrointestinal adverse events are common in the first month after delayed-release dimethyl fumarate initiation. Our objective was to propose mitigation strategies for adverse events related to initiation of delayed-release dimethyl fumarate in the treatment of patients with multiple sclerosis. Studies of individually developed mitigation strategies and chart reviews were evaluated. Those results, as well as mitigation protocols developed at multiple sclerosis care centers, are summarized. Key steps to optimize the effectiveness of delayed-release dimethyl fumarate treatment include education prior to and at the time of delayed-release dimethyl fumarate initiation, initiation dose protocol gradually increasing to maintenance dose, dietary suggestions for co-administration with food, gastrointestinal symptom management with over-the-counter medications, flushing symptom management with aspirin, and temporary dose reduction. Using the available evidence from clinical trials and evaluations of post-marketing studies, these strategies to manage gastrointestinal and flushing symptoms can be effective and helpful to the patient when initiating delayed-release dimethyl fumarate.

Development of a mechanistic model for release of radionuclides from spent fuel in brines: Salt Repository Project

International Nuclear Information System (INIS)

Reimus, P.W.; Windisch, C.F.

1988-03-01

At present there are no comprehensive mechanistic models describing the release of radionuclides from spent fuel in brine environments. This report provides a comprehensive review of the various factors that can affect radionuclide release from spent fuel, suggests a modeling approach, and discusses proposed experiments for obtaining a better mechanistic understanding of the radionuclide release processes. Factors affecting radionuclide release include the amount, location, and disposition of radionuclides in the fuel and environmental factors such as redox potential, pH, the presence of complexing anions, temperature, and radiolysis. It is concluded that a model describing the release of radionuclides from spent fuel should contain separate terms for release from the gap, grain boundaries, and grains of the fuel. Possible functional forms for these terms are discussed in the report. Experiments for assessing their validity and obtaining key model parameters are proposed. 71 refs., 4 figs., 6 tabs

2011 Release of the Evaluated Nuclear Data Library (ENDL2011.0)

Energy Technology Data Exchange (ETDEWEB)

Brown, D. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Beck, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Descalles, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Escher, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hoffman, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mattoon, C. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Navratil, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nobre, G. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ormand, W. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Summers, N. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thompson, I. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vogt, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Barnowski, R. [Univ. of California, Berkeley, CA (United States)

2015-05-12

LLNL’s Computational Nuclear Physics Group and Nuclear Theory and Modeling Group have collaborated to produce the last of three major releases of LLNL’s evaluated nuclear database, ENDL2011. ENDL2011 is designed to support LLNL’s current and future nuclear data needs by providing the best nuclear data available to our programmatic customers. This library contains many new evaluations for radiochemical diagnostics, structural materials, and thermonuclear reactions. We have made an effort to eliminate all holes in reaction networks, allowing in-line isotopic creation and depletion calculations. We have striven to keep ENDL2011 at the leading edge of nuclear data library development by reviewing and incorporating new evaluations as they are made available to the nuclear data community. Finally, this release is our most highly tested release as we have strengthened our already rigorous testing regime by adding tests against IPPE Activation Ratio Measurements, many more new critical assemblies and a more complete set of classified testing (to be detailed separately).

NFR TRIGA package design review report

International Nuclear Information System (INIS)

Clements, M.D.

1994-01-01

The purpose of this document is to compile, present and document the formal design review of the NRF TRIGA packaging. The contents of this document include: the briefing meeting presentations, package description, design calculations, package review drawings, meeting minutes, action item lists, review comment records, final resolutions, and released drawings. This design review required more than two meeting to resolve comments. Therefore, there are three meeting minutes and two action item lists

Granisetron Extended-Release Injection: A Review in Chemotherapy-Induced Nausea and Vomiting.

Science.gov (United States)

Deeks, Emma D

2016-12-01

An extended-release (ER) subcutaneously injectable formulation of the first-generation 5-HT 3 receptor antagonist granisetron is now available in the USA (Sustol ® ), where it is indicated for the prevention of acute and delayed chemotherapy-induced nausea and vomiting (CINV) following moderately emetogenic chemotherapy (MEC) or anthracycline and cyclophosphamide combination chemotherapy regimens in adults. Granisetron ER is administered as a single subcutaneous injection and uses an erosion-controlled drug-delivery system to allow prolonged granisetron release. Primary endpoint data from phase III studies after an initial cycle of chemotherapy indicate that, when used as part of an antiemetic regimen, granisetron ER injection is more effective than intravenous ondansetron in preventing delayed CINV following highly emetogenic chemotherapy (HEC); is noninferior to intravenous palonosetron in preventing both acute CINV following MEC or HEC and delayed CINV following MEC; and is similar, but not superior, to palonosetron in preventing delayed CINV following HEC. The benefits of granisetron ER were seen in various patient subgroups, including those receiving anthracycline plus cyclophosphamide-based HEC, and (in an extension of one of the studies) over multiple MEC or HEC cycles. Granisetron ER injection is generally well tolerated, with an adverse event profile similar to that of ondansetron or palonosetron. Thus, granisetron ER injection expands the options for preventing both acute and delayed CINV in adults with cancer receiving MEC or anthracycline plus cyclophosphamide-based HEC.

Design of whey protein nanostructures for incorporation and release of nutraceutical compounds in food.

Science.gov (United States)

Ramos, Oscar L; Pereira, Ricardo N; Martins, Artur; Rodrigues, Rui; Fuciños, Clara; Teixeira, José A; Pastrana, Lorenzo; Malcata, F Xavier; Vicente, António A

2017-05-03

Whey proteins are widely used as nutritional and functional ingredients in formulated foods because they are relatively inexpensive, generally recognized as safe (GRAS) ingredient, and possess important biological, physical, and chemical functionalities. Denaturation and aggregation behavior of these proteins is of particular relevance toward manufacture of novel nanostructures with a number of potential uses. When these processes are properly engineered and controlled, whey proteins may be formed into nanohydrogels, nanofibrils, or nanotubes and be used as carrier of bioactive compounds. This review intends to discuss the latest understandings of nanoscale phenomena of whey protein denaturation and aggregation that may contribute for the design of protein nanostructures. Whey protein aggregation and gelation pathways under different processing and environmental conditions such as microwave heating, high voltage, and moderate electrical fields, high pressure, temperature, pH, and ionic strength were critically assessed. Moreover, several potential applications of nanohydrogels, nanofibrils, and nanotubes for controlled release of nutraceutical compounds (e.g. probiotics, vitamins, antioxidants, and peptides) were also included. Controlling the size of protein networks at nanoscale through application of different processing and environmental conditions can open perspectives for development of nanostructures with new or improved functionalities for incorporation and release of nutraceuticals in food matrices.

A novel and alternative approach to controlled release drug delivery system based on solid dispersion technique

Directory of Open Access Journals (Sweden)

Tapan Kumar Giri

2012-12-01

Full Text Available The solid dispersion method was originally used to improve the dissolution properties and the bioavailability of poorly water soluble drugs by dispersing them into water soluble carriers. In addition to the above, dissolution retardation through solid dispersion technique using water insoluble and water swellable polymer for the development of controlled release dosage forms has become a field of interest in recent years. Development of controlled release solid dispersion has a great advantage for bypassing the risk of a burst release of drug; since the structure of the solid dispersion is monolithic where drug molecules homogeneously disperse. Despite the remarkable potential and extensive research being conducted on controlled release solid dispersion system, commercialization and large scale production are limited. The author expects that recent technological advances may overcome the existing limitations and facilitate the commercial utilization of the techniques for manufacture of controlled release solid dispersions. This article begins with an overview of the different carriers being used for the preparation of controlled release solid dispersion and also different techniques being used for the purpose. Kinetics of drug release from these controlled release solid dispersions and the relevant mathematical modeling have also been reviewed in this manuscript.

A Mobile Aviary Design to Allow the Soft Release of Cavity Nesting Birds

Science.gov (United States)

Kathleen E. Franzreb

1997-01-01

Translocation of endangered red-cockaded woodpeckers (Picoides boreal is) has been an important component in restoration efforts to establish new populations and enlarge small populations. These efforts-relying on a "hard release" approach whereby the bird is captured, moved, and immediately released at the new site-have met with mixed results. A mobile...

Assessment of consequences from airborne releases of radioactive material

International Nuclear Information System (INIS)

McGrath, P.E.; Blond, R.M.

1976-01-01

Over the past several years, the manner in which assessments have been made of the consequences of large airborne releases of radioactive material has not changed much conceptually. The models to describe the atmospheric dispersion of the radioactive material have generally been time-invariant, i.e., the meteorological conditions (thermal stability, wind speed, and precipitation) are invariant during release and the subsequent period of radiation exposure of the population to the airborne material. The frequency distribution of the meteorological conditions are determined by analyzing several years of weather data from the appropriate geographical location. In reality, weather is continuously changing over short time periods (hours) following the release. It is to be expected that the changing meteorological conditions would have important effects on the potential consequences of the release. A time-dependent atmospheric dispersion model was developed and implemented in the Reactor Safety Study. This paper provides a description of the model and the nature of the results generated. Emphasis is given to an explanation of how, and why, these results differ from those estimated with time-invariant models

Reuse of conditional released materials from decommissioning; a review of approaches and scenarios with long-term constructions - 59149

International Nuclear Information System (INIS)

Daniska, Vladimir; Pritrsky, Jozef; Ondra, Frantisek; Zachar, Matej; Necas, Vladimir

2012-01-01

Paper presents the overall scope and actual results of the project for evaluation of representative scenarios for reuse of conditionally released materials from decommissioning. Aim of the project is to evaluate the possibilities of reuse of conditionally released steels and concrete in technical constructions which guarantee the long-term preservation of design properties over periods of 50-100 years. Interaction of conditionally released materials with public is limited and predictable due to design and purpose of selected constructions and due to fact that in many scenarios these materials are embedded in non-radioactive materials such as bars in reinforced concrete. Worker's scenarios for preparation, operation and maintenance of these constructions are analysed in detail including the manufacturing of elements for these constructions. Project aims to evaluate the scenarios of reuse of conditionally released materials in a complex way in order to develop the data for designers of scenarios and to evaluate the volumes of conditionally released materials based on facility (to be decommissioned) inventory data. The long-term constructions considered are bridges, tunnels, roads, railway constructions, industrial buildings, power industry equipment and others. Evaluation covers following areas: - Analysis of activities for manufacturing of reinforcement bars, rolled steel sheets and other steel elements and analysis of activities for construction of evaluated scenarios in order to evaluate the external exposure of professionals performing these activities; - Analysis of external exposure of professionals involved in operation and maintenance of the long-term constructions; analysis of external exposure of public groups which are exposed to evaluated constructions; - Analysis of internal exposure of public groups from the radionuclides released from the evaluated scenarios based on models for migration of radionuclides from the long-term constructions to critical

Colloid electrochemistry of conducting polymer: towards potential-induced in-situ drug release

International Nuclear Information System (INIS)

Sankoh, Supannee; Vagin, Mikhail Yu.; Sekretaryova, Alina N.; Thavarungkul, Panote; Kanatharana, Proespichaya; Mak, Wing Cheung

2017-01-01

Highlights: • Pulsed electrode potential induced an in-situ drug release from dispersion of conducting polymer microcapsules. • Fast detection of the released drug within the colloid microenvironment. • Improved the efficiency of localized drug release at the electrode interface. - Abstract: Over the past decades, controlled drug delivery system remains as one of the most important area in medicine for various diseases. We have developed a new electrochemically controlled drug release system by combining colloid electrochemistry and electro-responsive microcapsules. The pulsed electrode potential modulation led to the appearance of two processes available for the time-resolved registration in colloid microenvironment: change of the electronic charge of microparticles (from 0.5 ms to 0.1 s) followed by the drug release associated with ionic equilibration (1–10 s). The dynamic electrochemical measurements allow the distinction of drug release associated with ionic relaxation and the change of electronic charge of conducting polymer colloid microparticles. The amount of released drug (methylene blue) could be controlled by modulating the applied potential. Our study demonstrated a surface-potential driven controlled drug release of dispersion of conducting polymer carrier at the electrode interfaces, while the bulk colloids dispersion away from the electrode remains as a reservoir to improve the efficiency of localized drug release. The developed new methodology creates a model platform for the investigations of surface potential-induced in-situ electrochemical drug release mechanism.

Proving Opacity of Transactional Memory with Early Release

Directory of Open Access Journals (Sweden)

Siek Konrad

2015-12-01

Full Text Available Transactional Memory (TM is an alternative way of synchronizing concurrent accesses to shared memory by adopting the abstraction of transactions in place of low-level mechanisms like locks and barriers. TMs usually apply optimistic concurrency control to provide a universal and easy-to-use method of maintaining correctness. However, this approach performs a high number of aborts in high contention workloads, which can adversely affect performance. Optimistic TMs can cause problems when transactions contain irrevocable operations. Hence, pessimistic TMs were proposed to solve some of these problems. However, an important way of achieving efficiency in pessimistic TMs is to use early release. On the other hand, early release is seemingly at odds with opacity, the gold standard of TM safety properties, which does not allow transactions to make their state visible until they commit. In this paper we propose a proof technique that makes it possible to demonstrate that a TM with early release can be opaque as long as it prevents inconsistent views.

A Thematic Literature Review: The Importance of Providing Spiritual Care for End-of-Life Patients Who Have Experienced Transcendence Phenomena.

Science.gov (United States)

Broadhurst, Kathleen; Harrington, Ann

2016-11-01

The purpose of this review was to investigate within the literature the link between transcendent phenomena and peaceful death. The objectives were firstly to acknowledge the importance of such experiences and secondly to provide supportive spiritual care to dying patients. Information surrounding the aforementioned concepts is underreported in the literature. The following 4 key themes emerged: spiritual comfort; peaceful, calm death; spiritual transformation; and unfinished business The review established the importance of transcendence phenomena being accepted as spiritual experiences by health care professionals. Nevertheless, health care professionals were found to struggle with providing spiritual care to patients who have experienced them. Such phenomena are not uncommon and frequently result in peaceful death. Additionally, transcendence experiences of dying patients often provide comfort to the bereaved, assisting them in the grieving process. © The Author(s) 2015.

Drug-releasing shape-memory polymers - the role of morphology, processing effects, and matrix degradation.

Science.gov (United States)

Wischke, Christian; Behl, Marc; Lendlein, Andreas

2013-09-01

Shape-memory polymers (SMPs) have gained interest for temporary drug-release systems that should be anchored in the body by self-sufficient active movements of the polymeric matrix. Based on the so far published scientific literature, this review highlights three aspects that require particular attention when combining SMPs with drug molecules: i) the defined polymer morphology as required for the shape-memory function, ii) the strong effects that processing conditions such as drug-loading methodologies can have on the drug-release pattern from SMPs, and iii) the independent control of drug release and degradation by their timely separation. The combination of SMPs with a drug-release functionality leads to multifunctional carriers that are an interesting technology for pharmaceutical sciences and can be further expanded by new materials such as thermoplastic SMPs or temperature-memory polymers. Experimental studies should include relevant molecules as (model) drugs and provide a thermomechanical characterization also in an aqueous environment, report on the potential effect of drug type and loading levels on the shape-memory functionality, and explore the potential correlation of polymer degradation and drug release.

Controlled release for crop and wood protection: Recent progress toward sustainable and safe nanostructured biocidal systems.

Science.gov (United States)

Mattos, Bruno D; Tardy, Blaise L; Magalhães, Washington L E; Rojas, Orlando J

2017-09-28

We review biocide delivery systems (BDS), which are designed to deter or control harmful organisms that damage agricultural crops, forests and forest products. This is a timely topic, given the growing socio-economical concerns that have motivated major developments in sustainable BDS. Associated designs aim at improving or replacing traditional systems, which often consist of biocides with extreme behavior as far as their solubility in water. This includes those that compromise or pollute soil and water (highly soluble or volatile biocides) or those that present low bioavailability (poorly soluble biocides). Major breakthroughs are sought to mitigate or eliminate consequential environmental and health impacts in agriculture and silviculture. Here, we consider the most important BDS vehicles or carriers, their synthesis, the environmental impact of their constituents and interactions with the active components together with the factors that affect their rates of release such as environmental factors and interaction of BDS with the crops or forest products. We put in perspective the state-of-the-art nanostructured carriers for controlled release, which need to address many of the challenges that exist in the application of BDS. Copyright © 2017 Elsevier B.V. All rights reserved.

Calculations in support of a potential definition of large release

International Nuclear Information System (INIS)

Hanson, A.L.; Davis, R.E.; Mubayi, V.

1994-05-01

The Nuclear Regulatory Commission has stated a hierarchy of safety goals with the qualitative safety goals as Level I of the hierarchy, backed up by the quantitative health objectives as Level II and the large release guideline as Level III. The large release guideline has been stated in qualitative terms as a magnitude of release of the core inventory whose frequency should not exceed 10 -6 per reactor year. However, the Commission did not provide a quantitative specification of a large release. This report describes various specifications of a large release and focuses, in particular, on an examination of releases which have a potential to lead to one prompt fatality in the mean. The basic information required to set up the calculations was derived from the simplified source terms which were obtained from approximations of the NUREG-1150 source terms. Since the calculation of consequences is affected by a large number of assumptions, a generic site with a (conservatively determined) population density and meteorology was specified. At this site, various emergency responses (including no response) were assumed based on information derived from earlier studies. For each of the emergency response assumptions, a set of calculations were performed with the simplified source terms; these included adjustments to the source terms, such as the timing of the release, the core inventory, and the release fractions of different radionuclides, to arrive at a result of one mean prompt fatality in each case. Each of the source terms, so defined, has the potential to be a candidate for a large release. The calculations show that there are many possible candidate source terms for a large release depending on the characteristics which are felt to be important

12 CFR 404.6 - Release of records under the Freedom of Information Act.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Release of records under the Freedom of Information Act. 404.6 Section 404.6 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES INFORMATION DISCLOSURE Procedures for Disclosure of Records Under the Freedom of Information Act. § 404.6 Release of...

Simulation and parametric study of a film-coated controlled-release pharmaceutical.

Science.gov (United States)

Borgquist, Per; Zackrisson, Gunnar; Nilsson, Bernt; Axelsson, Anders

2002-04-23

Pharmaceutical formulations can be designed as Multiple Unit Systems, such as Roxiam CR, studied in this work. The dose is administrated as a capsule, which contains about 100 individual pellets, which in turn contain the active drug remoxipride. Experimental data for a large number of single pellets can be obtained by studying the release using microtitre plates. This makes it possible to study the release of the individual subunits making up the total dose. A mathematical model for simulating the release of remoxipride from single film-coated pellets is presented including internal and external mass transfer hindrance apart from the most important film resistance. The model can successfully simulate the release of remoxipride from single film-coated pellets if the lag phase of the experimental data is ignored. This was shown to have a minor influence on the release rate. The use of the present model is demonstrated by a parametric study showing that the release process is film-controlled, i.e. is limited by the mass transport through the polymer coating. The model was used to fit the film thickness and the drug loading to the experimental release data. The variation in the fitted values was similar to that obtained in the experiments.

Aspirin Induces Apoptosis through Release of Cytochrome c from Mitochondria

Directory of Open Access Journals (Sweden)

Katja C. Zimmermann

2000-01-01

Full Text Available Nonsteroidal anti-inflammatory drugs (NSAID reduce the risk for cancer, due to their anti proliferative and apoptosis-inducing effects. A critical pathway for apoptosis involves the release of cytochrome c from mitochondria, which then interacts with Apaf-1 to activate caspase proteases that orchestrate cell death. In this study we found that treatment of a human cancer cell line with aspirin induced caspase activation and the apoptotic cell morphology, which was blocked by the caspase inhibitor zVAD-fmk. Further analysis of the mechanism underlying this apoptotic event showed that aspirin induces translocation of Bax to the mitochondria and triggers release of cytochrome c into the cytosol. The release of cytochrome c from mitochondria was inhibited by overexpression of the antiapoptotic protein Bcl-2 and cells that lack Apaf-1 were resistant to aspirin-induced apoptosis. These data provide evidence that the release of cytochrome c is an important part of the apoptotic mechanism of aspirin.

Metal is not inert: role of metal ions released by biocorrosion in aseptic loosening--current concepts.

Science.gov (United States)

Cadosch, Dieter; Chan, Erwin; Gautschi, Oliver P; Filgueira, Luis

2009-12-15

Metal implants are essential therapeutic tools for the treatment of bone fractures and joint replacements. The metals and metal alloys used in contemporary orthopedic and trauma surgery are well tolerated by the majority of patients. However, complications resulting from inflammatory and immune reactions to metal implants have been well documented. This review briefly discusses the different mechanisms of metal implant corrosion in the human body, which lead to the release of significant levels of metal ions into the peri-implant tissues and the systemic blood circulation. Additionally, this article reviews the effects of the released ions on bone metabolism and the immune system and discusses their involvement in the pathophysiological mechanisms of aseptic loosening and metal hypersensitivity in patients with metal implants.

The importance of academic literacy for undergraduate nursing students and its relationship to future professional clinical practice: A systematic review.

Science.gov (United States)

Jefferies, Diana; McNally, Stephen; Roberts, Katriona; Wallace, Anna; Stunden, Annette; D'Souza, Suzanne; Glew, Paul

2018-01-01

This systematic review was designed to assess the importance of academic literacy for undergraduate nursing students and its relationship to future professional clinical practice. It aimed to explore the link between academic literacy and writing in an undergraduate nursing degree and the development of critical thinking skills for their future professional clinical practice. A systematic review of qualitative studies and expert opinion publications. A systematic literature search was undertaken of the following databases: ERIC, PubMed, CINAHL, MEDLINE and Scopus. All papers reviewed were from 2000 to 2016 and were written in English. We identified 981 studies and expert opinion papers from the selected databases. After reviewing key words and abstracts for the inclusion and exclusion criteria, 48 papers were selected for review. These were read and reread, with 22 papers, including one thesis, selected for quality appraisal. One paper was discarded due to the exclusion criteria. Three major themes were evident from this study. First, students need assistance to develop tertiary level academic literacy skills when they commence their undergraduate nursing degree. Second, that teaching practices need to be consistent in both designing assessments and in giving feedback to students, in order to assist improvement of academic literacy skills. And finally, academic literacy can facilitate critical thinking when students are assessed using discipline specific genres that relate to their future professional nursing practice. This review highlights the importance of critical thinking in clinical nursing practice and its strong relationship with academic writing skills. It has shown critical thinking is discipline specific and nursing students need to be taught discipline specific literacy genres in undergraduate nursing degrees. Nursing has a diverse educational and cultural mix of students, and educators should not assume academic literacy skills upon commencement of an

Drug kinetics release from Eudragit – Tenofovir@SiOC tablets

Energy Technology Data Exchange (ETDEWEB)

Tamayo, A., E-mail: aitanath@icv.csic.es [Ceramics and Glass Institute, CSIC, Madrid (Spain); Mazo, M.A. [Ceramics and Glass Institute, CSIC, Madrid (Spain); Veiga, M.D.; Ruiz-Caro, R.; Notario-Pérez, F. [Dpt. Pharmaceutical Technology, Faculty of Pharmacy, Complutense University of Madrid, Madrid (Spain); Rubio, J. [Ceramics and Glass Institute, CSIC, Madrid (Spain)

2017-06-01

A novel drug release system has been obtained in form of tablets from Eudragit® RS and tenofovir loaded on porous silicon oxycarbide glasses (SiOC). Active carbon (AC) and mesoporous silica (MCM-41) have also been used for comparative purposes. The porous silicon oxycarbide presents a bimodal mesopore size distribution that is maintained after functionalization with amino groups. We have studied the adsorption kinetics and adsorption equilibrium when the materials are loaded with tenofovir and, in all cases, pseudo-second order kinetics and Langmuir isotherm have been revealed as the most representative models describing the kinetic and thermodynamic parameters. Besides, the tenofovir adsorption on these materials turns out to be a favorable process. In vitro release of tenofovir has been studied in simulated vaginal medium by applying different release models. Continuous tenofovir release for > 20 days has been obtained for the SiOC material functionalized with amine groups. We concluded that the drug release occurs in two steps that involve a drug diffusion step through the material pores and diffusion through the swollen polymer. The interactions between the tenofovir drug and de amine groups of the functionalized silicon oxycarbide also play an important role in the release process. - Highlights: • Kinetic and thermodinamic parameters of the adsorption of tenofovir on porous substrates have been obtained. • Sustained release of TFV for > 20 days in SVF when it is supported on SiOC and manufactured as Eudragit®RS-containing tablets. • Release described by a two-step process involving diffusion through SiOC matrix and subsequent diffusion through the polymer.

Release mechanisms from shallow engineered trenches used as repositories for radioactive wastes

International Nuclear Information System (INIS)

Locke, J.; Wood, E.

1987-05-01

This report has been written for the Department of the Environment as part of their radioactive waste management research programme. The aim has been to identify release mechanisms of radioactivity from fully engineered trenches of the LAND 2 type and, to identify the data needed for their assessment. No direct experimental work has been involved. The report starts with a brief background to UK strategy and outlines a basic disposal system. It gives reviews of existing experience of low level radioactive waste disposal from LAND 1 trenches and of UK experience of toxic waste disposal to provide a practical basis for the next section which covers the implications of identified release mechanisms on the design requirements for an engineered trench. From these design requirements and their interaction with potential site conditions (both saturated and unsaturated zone sites are considered) an assessment of radionuclide release mechanism is made. (author)

Polymer blend microspheres for controlled drug release: the techniques for preparation and characterization: a review article.

Science.gov (United States)

Dasan, K Priya; Rekha, C

2012-11-01

The use of polymers and their microspheres in drug delivery is well known for they are being widely used in the field of drug delivery. The polymer entraps a drug which is to be released in a predesigned manner in the body through biodegradation. The blending of polymers is one way of modifying and enhancing the properties of polymer- based products which is also a cost effective procedure rather than developing a new product. The molecular weight of the polymer, the composition of the blend, the sphere porosity and size, and drug distribution are found to be controllable factors on which drug delivery depends. Polymer blends are obtained by allowing two polymers to combine as one material which has the advantage of two or more polymers. Polymer microspheres are small spherical particles with diameters in the micrometer range between 1μm to 1000μm which are manufactured from various natural and synthetic materials. Microspheres are used to administer medication in a rate- controlled manner and sometimes in a targeted manner. This review presents various polymer blend- combinations in different ratios, the different processing techniques adopted and the details of their characterization through examples found in a literature survey. The characterization of the different polymer blends or microspheres showed changes in structure, increase in drug loading, encapsulation efficiency, biocompatibility and low cytotoxicity.

Recent Advances in Stimuli-Responsive Release Function Drug Delivery Systems for Tumor Treatment

Directory of Open Access Journals (Sweden)

Chendi Ding

2016-12-01

Full Text Available Benefiting from the development of nanotechnology, drug delivery systems (DDSs with stimuli-responsive controlled release function show great potential in clinical anti-tumor applications. By using a DDS, the harsh side effects of traditional anti-cancer drug treatments and damage to normal tissues and organs can be avoided to the greatest extent. An ideal DDS must firstly meet bio-safety standards and secondarily the efficiency-related demands of a large drug payload and controlled release function. This review highlights recent research progress on DDSs with stimuli-responsive characteristics. The first section briefly reviews the nanoscale scaffolds of DDSs, including mesoporous nanoparticles, polymers, metal-organic frameworks (MOFs, quantum dots (QDs and carbon nanotubes (CNTs. The second section presents the main types of stimuli-responsive mechanisms and classifies these into two categories: intrinsic (pH, redox state, biomolecules and extrinsic (temperature, light irradiation, magnetic field and ultrasound ones. Clinical applications of DDS, future challenges and perspectives are also mentioned.

Low activity resin processing and disposal options review

International Nuclear Information System (INIS)

Gardner, F.

1996-01-01

New processing options for low activity resin processing and disposal are available. This presentation reviews the economics and technical requirements associated with the following low activity resin processing options. (1) Bulk release resin. (2) Direct disposal. (3) Decontamination and bulk release of cleaned resin. New processing and disposal options have been developed during 1995. Commercial experience with each of these options will be reviewed and the economics associated with the processing method described in detail. Technical requirements for each option will be identified specifying the activity limits and operational requirements for implementation

Sustained release nimesulide microparticles: evaluation of release modifying property of ethy

International Nuclear Information System (INIS)

Khan, S.A.; Ahmed, M.; Nisar-ur-Rehman; Madni, A.U.; Aamir, M.N.; Murtaza, G.

2011-01-01

Microencapsulated controlled-release preparations of nimesulide were formulated. Microparticles were prepared by modified phase separation (non-solvent addition) technique using different ratios of ethylcellulose. The microparticles (M/sub 1/, M/sub 2/, and M/sub 3/) were yellow, free flowing and spherical in shape with the particle size varying from 93.62 +- 14.15 to 104.19 +- 18.15 mu m. The t/sub 60%/of nimesulide release from microparticles was found to be 3 +- 0.6, 5 +- 0.6 and 8 +- 0.8 h for formulations M/sub 1/, M/sub 2/, and M/sub 3/, respectively. FT-IR, XRD, and thermal analysis were done which showed that there is no interaction between the polymer and drug. The mechanism of drug release from nimesulide microparticles was studied by using Higuchi and Korsmeyer-Peppas models. The value of coefficient of determination (R/sup 2/) for M/sub 1/, M/sub 2/, and M/sub 3/ indicates anomalous and case-II transport release mechanism. The dissolution data of designed system verified its ability to maintain plasma concentration without the need of frequent dosing. The Nimesulide microparticles prolonged drug release for 12 hours or longer. Based on the results of release studies, M/sub 3/ was opted as a suitable microparticulate formulation allowing the controlled release of nimesulide over a prolonged period of time. Moreover, its encapsulation efficiency was also comparable to the other two formulations (M/sub 1/ and M/sub 2/). In conclusion, the influence of polymer concentration should be considered during formulation development. (author)

REUSE OF TREATED WASTEWATER IN AGRICULTURE: SOLVING WATER DEFICIT PROBLEMS IN ARID AREAS (REVIEW

Directory of Open Access Journals (Sweden)

Faissal AZIZ

2014-12-01

Full Text Available In the arid and semiarid areas, the availability and the management of irrigation water have become priorities of great importance. The successive years of drought, induced by climate change and population growth, increasingly reduced the amount of water reserved for agriculture. Consequently, many countries have included wastewater reuse as an important dimension of water resources planning. In the more arid areas wastewater is used in agriculture, releasing high resource of water supplies. In this context, the present work is a review focusing the reuse of treated wastewater in agriculture as an important strategy for solving water deficit problems in arid areas. Much information concerning the wastewater reuse in different regions of the world and in Morocco, the different wastewater treatment technologies existing in Morocco were discussed. The review focused also the fertilizing potential of wastewater in agriculture, the role of nutrients and their concentrations in wastewater and their advantages effects on plant growth and yield.

Recommended plutonium release fractions from postulated fires. Final report

International Nuclear Information System (INIS)

Kogan, V.; Schumacher, P.M.

1993-12-01

This report was written at the request of EG ampersand G Rocky Flats, Inc. in support of joint emergency planning for the Rocky Flats Plant (RFP) by EG ampersand G and the State of Colorado. The intent of the report is to provide the State of Colorado with an independent assessment of any respirable plutonium releases that might occur in the event of a severe fire at the plant. Fire releases of plutonium are of interest because they have been used by EG ampersand G to determine the RFP emergency planning zones. These zones are based on the maximum credible accident (MCA) described in the RFP Final Environmental Impact Statement (FEIS) of 1980, that MCA is assumed to be a large airplane crashing into a RFP plutonium building.The objective of this report was first, to perform a worldwide literature review of relevant release experiments from 1960 to the present and to summarize those findings, and second, to provide recommendations for application of the experimental data to fire release analyses at Rocky Flats. The latter step requires translation between experimental and expected RFP accident parameters, or ''scaling.'' The parameters of particular concern are: quantities of material, environmental parameters such as the intensity of a fire, and the physico-chemical forms of the plutonium. The latter include plutonium metal, bulk plutonium oxide powder, combustible and noncombustible wastes contaminated with plutonium oxide powder, and residues from plutonium extraction processes

Meso-meteorological effect of thermal releases from nuclear power plants in the GW range

International Nuclear Information System (INIS)

Bahloul, C.; Le Berre, P.

1975-01-01

A comparison is made between the energy released by nuclear power plants into the environment and the energy brought into action by meso-meteorological phenomena. Observations on the occasion of important heat release (forest fires) are made and compared with the thermal effluents generated by nuclear power plants [fr

Investigating the in vitro drug release kinetics from controlled release diclofenac potassium-ethocel matrix tablets and the influence of co-excipients on drug release patterns.

Science.gov (United States)

Shah, Shefaat Ullah; Shah, Kifayat Ullah; Rehman, Asimur; Khan, Gul Majid

2011-04-01

The objective of the study was to formulate and evaluate controlled release polymeric tablets of Diclofenac Potassium for the release rate, release patterns and the mechanism involved in the release process of the drug. Formulations with different types and grades of Ethyl Cellulose Ether derivatives in several drug-to-polymer ratios (D:P) were compressed into tablets using the direct compression method. In vitro drug release studies were performed in phosphate buffer (pH 7.4) as dissolution medium by using USP Method-1 (Rotating Basket Method). Similarity factor f2 and dissimilarity factor f1 were applied for checking the similarities and dissimilarities of the release profiles of different formulations. For the determination of the release mechanism and drug release kinetics various mathematical/kinetic models were employed. It was found that all of the Ethocel polymers could significantly slow down the drug release rate with Ethocel FP polymers being the most efficient, especially at D:P ratios of 10:03 which lead towards the achievement of zero or near zero order release kinetics.

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach.

Science.gov (United States)

Mudd, Gavin M

2008-02-01

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting.

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach

International Nuclear Information System (INIS)

Mudd, Gavin M.

2008-01-01

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting

Protecting privacy in data release

CERN Document Server

Livraga, Giovanni

2015-01-01

This book presents a comprehensive approach to protecting sensitive information when large data collections are released by their owners. It addresses three key requirements of data privacy: the protection of data explicitly released, the protection of information not explicitly released but potentially vulnerable due to a release of other data, and the enforcement of owner-defined access restrictions to the released data. It is also the first book with a complete examination of how to enforce dynamic read and write access authorizations on released data, applicable to the emerging data outsou

EPICS release 3.11 specific documentation -- EPICS release notes for 3.11

International Nuclear Information System (INIS)

1994-01-01

EPICS release 3.11 is now ready for user testing. A person who wants to set up a simplified application environment to boot an IOC and create databases using R3.11 should follow the directions in Appendix B, page 27, of the EPICS Source/Release Control Manual, Sept. 20, 1993. The R3.11 EPICS path at ANL/APS is /net/phebos/epics/R3.11 so the command to get the new release is /net/phebos/epics/R3.11/Unix/share/bin/getrel /net/phebos/epics/R3.11. An existing R3.8 short form report can be copied to this new directory and used to create a database. ANL/APS is currently testing an Application Developers Source/Release control system. It is not yet ready for general distribution. Attached are the EPICS R3.11 release notes

Release of major ions during rigor mortis development in kid Longissimus dorsi muscle.

Science.gov (United States)

Feidt, C; Brun-Bellut, J

1999-01-01

Ionic strength plays an important role in post mortem muscle changes. Its increase is due to ion release during the development of rigor mortis. Twelve alpine kids were used to study the effects of chilling and meat pH on ion release. Free ions were measured in Longissimus dorsi muscle by capillary electrophoresis after water extraction. All free ion concentrations increased after death, but there were differences between ions. Temperature was not a factor affecting ion release in contrast to ultimate pH value. Three release mechanisms are believed to coexist: a passive binding to proteins, which stops as pH decreases, an active segregation which stops as ATP disappears and the production of metabolites due to anaerobic glycolysis.

Growth factor delivery: How surface interactions modulate release in vitro and in vivo

Science.gov (United States)

King, William J.; Krebsbach, Paul H.

2013-01-01

Biomaterial scaffolds have been extensively used to deliver growth factors to induce new bone formation. The pharmacokinetics of growth factor delivery has been a critical regulator of their clinical success. This review will focus on the surface interactions that control the non-covalent incorporation of growth factors into scaffolds and the mechanisms that control growth factor release from clinically relevant biomaterials. We will focus on the delivery of recombinant human bone morphogenetic protein-2 from materials currently used in the clinical practice, but also suggest how general mechanisms that control growth factor incorporation and release delineated with this growth factor could extend to other systems. A better understanding of the changing mechanisms that control growth factor release during the different stages of preclinical development could instruct the development of future scaffolds for currently untreatable injuries and diseases. PMID:22433783

The mechanisms of drug release from solid dispersions in water-soluble polymers.

Science.gov (United States)

Craig, Duncan Q M

2002-01-14

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. However, despite the publication of numerous original papers and reviews on the subject, the mechanisms underpinning the observed improvements in dissolution rate are not yet understood. In this review the current consensus with regard to the solid-state structure and dissolution properties of solid dispersions is critically assessed. In particular the theories of carrier- and drug-controlled dissolution are highlighted. A model is proposed whereby the release behaviour from the dispersions may be understood in terms of the dissolution or otherwise of the drug into the concentrated aqueous polymer layer adjacent to the solid surface, including a derivation of an expression to describe the release of intact particles from the dispersions. The implications of a deeper understanding of the dissolution mechanisms are discussed, with particular emphasis on optimising the choice of carrier and manufacturing method and the prediction of stability problems.

Lateral patellar retinacular release: changes over the last ten years

Directory of Open Access Journals (Sweden)

Leonardo Pini Rosalem Marciano da Fonseca

Full Text Available ABSTRACT Lateral retinacular release is a useful resource in knee surgery that can be used for disorders of the extensor mechanism. For many years, it was indiscriminately used in the treatment of the various patellofemoral joint alterations, with conflicting functional results. This study aimed to analyze the changes that have occurred in the indications and clinical effectiveness of lateral retinacular release by reviewing the relevant literature of the past ten years, comparing it to the classic literature on the subject. It was found that less extensive releases decompress the lateral patellar facet, helping with pain control, while decreasing the risks of medial subluxation. Nowadays, there is clear evidence for its indication in the lateral patellar hypercompression syndrome associated with anterior knee pain, as long as there is no related instability; furthermore, it will normally play an adjuvant role in extensor mechanism alignment surgeries for cases of recurrent patellar instability. The initial results for symptomatic patellofemoral osteoarthritis are promising when lateral release is combined with cartilage debridement; in total knee replacement, it is more commonly used for the correction of valgus deformity in order to improve the components’ congruency. Finally, distinguishing the different patellofemoral joint pathologies is seen as crucial in order to indicate this procedure. Further randomized control trials that compare surgical techniques with long-term results are still needed.

FERLENT - a controlled release fertilizer produced from a polymer material

International Nuclear Information System (INIS)

Gonzalez, Mayra; Arces, Milagros; Cuesta, Ernesto; Corredera, Pilar; Sardina, Carmen; Rieumont, Jacques; Quintana, Patricia; Bartolo, Pascual; Guenther, Bluma

2011-01-01

The possibility to use release controlled fertilizers in the agriculture of the tropical countries is more important than in the agriculture of the countries of the template regions. In this context, this work purpose the development of a new Fertilizer of Controlled Release named FERLENT, which was obtained starting from a polymeric material, under controlled conditions which allowed to corroborate the adjustment of the synthesis parameters under the modulate of nutrients liberation. It was characterized by, Scanning Microscopy Electron (SEM), Thermogravimetric analysis (TGA), Nuclear Magnetic Resonance (NMR) and infrared spectroscopy (FTIR). (author)

Field experiments with subsurface releases of oil and and dyed water

International Nuclear Information System (INIS)

Rye, H.; Brandvik, P.J.; Strom, T.

1998-01-01

A field experiment with a subsurface release of oil and air was carried out in June 1996 close to the Frigg Field in the North Sea area. One of the purposes of this sea trial was to increase the knowledge concerning the behaviour of the oil and gas during a subsurface blowout. This was done by releasing oil and air at 106 meters depth with a realistic gas oil ratio (GOR=67) and release velocity of the oil. In addition to the oil release, several releases with dyed water and gas (GOR=7 - 65) were performed. Important and unique data were collected during these subsurface releases. In particular, the experiments with the dyed water releases combined with air turned out to be an efficient way of obtaining field data for the behaviour of subsurface plumes. The main conclusions from analysis for the data collected are: the field methodology used to study blowout releases in the field appears to be appropriate. The use of dyed water to determine the performance of the subsurface plume proved out to be an efficient way to obtain reliable and useful data. The behaviour of the subsurface plume is very sensitive to gas flow rates. For low gas flow rates, the plume did not reach the sea surface at all due to the presence of stratification in the ambient water. Some discrepancies were found between a numerical model for subsurface releases and field results. These discrepancies are pointed out, and recommendations for possible model improvements are given. (author)

Bilayer tablets of Paliperidone for Extended release osmotic drug delivery

Science.gov (United States)

Chowdary, K. Sunil; Napoleon, A. A.

2017-11-01

The purpose of this study is to develop and optimize the formulation of paliperidone bilayer tablet core and coating which should meet in vitro performance of trilayered Innovator sample Invega. Optimization of core formulations prepared by different ratio of polyox grades and optimization of coating of (i) sub-coating build-up with hydroxy ethyl cellulose (HEC) and (ii).enteric coating build-up with cellulose acetate (CA). Some important influence factors such as different core tablet compositions and different coating solution ingredients involved in the formulation procedure were investigated. The optimization of formulation and process was conducted by comparing different in vitro release behaviours of Paliperidone. In vitro dissolution studies of Innovator sample (Invega) with formulations of different release rate which ever close release pattern during the whole 24 h test is finalized.

Triggered Release from Polymer Capsules

Energy Technology Data Exchange (ETDEWEB)

Esser-Kahn, Aaron P. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Odom, Susan A. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry; Sottos, Nancy R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Materials Science and Engineering; White, Scott R. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Aerospace Engineering; Moore, Jeffrey S. [Univ. of Illinois, Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology and Dept. of Chemistry

2011-07-06

Stimuli-responsive capsules are of interest in drug delivery, fragrance release, food preservation, and self-healing materials. Many methods are used to trigger the release of encapsulated contents. Here we highlight mechanisms for the controlled release of encapsulated cargo that utilize chemical reactions occurring in solid polymeric shell walls. Triggering mechanisms responsible for covalent bond cleavage that result in the release of capsule contents include chemical, biological, light, thermal, magnetic, and electrical stimuli. We present methods for encapsulation and release, triggering methods, and mechanisms and conclude with our opinions on interesting obstacles for chemically induced activation with relevance for controlled release.

Effect of light and nutrient availability on the release of dissolved organic carbon (DOC) by Caribbean turf algae.

Science.gov (United States)

Mueller, Benjamin; den Haan, Joost; Visser, Petra M; Vermeij, Mark J A; van Duyl, Fleur C

2016-03-22

Turf algae increasingly dominate benthic communities on coral reefs. Given their abundance and high dissolved organic carbon (DOC) release rates, turf algae are considered important contributors to the DOC pool on modern reefs. The release of photosynthetically fixed carbon as DOC generally, but not always, increases with increased light availability. Nutrient availability was proposed as an additional factor to explain these conflicting observations. To address this proposed but untested hypothesis, we documented the interactive contributions of light and nutrient availability on the release of DOC by turf algae. DOC release rates and oxygen production were quantified in incubation experiments at two light levels (full and reduced light) and two nutrient treatments (natural seawater and enriched seawater). In natural seawater, DOC release at full light was four times higher than at reduced light. When nutrients were added, DOC release rates at both light levels were similar to the natural seawater treatment at full light. Our results therefore show that low light in combination with low nutrient availability reduces the release of DOC by turf algae and that light and nutrient availability interactively determine DOC release rates by this important component of Caribbean reef communities.

Heteroreceptors Modulating CGRP Release at Neurovascular Junction: Potential Therapeutic Implications on Some Vascular-Related Diseases

Directory of Open Access Journals (Sweden)

Abimael González-Hernández

2016-01-01

Full Text Available Calcitonin gene-related peptide (CGRP is a 37-amino-acid neuropeptide belonging to the calcitonin gene peptide superfamily. CGRP is a potent vasodilator with potential therapeutic usefulness for treating vascular-related disease. This peptide is primarily located on C- and Aδ-fibers, which have extensive perivascular presence and a dual sensory-efferent function. Although CGRP has two major isoforms (α-CGRP and β-CGRP, the α-CGRP is the isoform related to vascular actions. Release of CGRP from afferent perivascular nerve terminals has been shown to result in vasodilatation, an effect mediated by at least one receptor (the CGRP receptor. This receptor is an atypical G-protein coupled receptor (GPCR composed of three functional proteins: (i the calcitonin receptor-like receptor (CRLR; a seven-transmembrane protein, (ii the activity-modifying protein type 1 (RAMP1, and (iii a receptor component protein (RCP. Although under physiological conditions, CGRP seems not to play an important role in vascular tone regulation, this peptide has been strongly related as a key player in migraine and other vascular-related disorders (e.g., hypertension and preeclampsia. The present review aims at providing an overview on the role of sensory fibers and CGRP release on the modulation of vascular tone.

Inwardly rectifying potassium channels influence Drosophila wing morphogenesis by regulating Dpp release.

Science.gov (United States)

Dahal, Giri Raj; Pradhan, Sarala Joshi; Bates, Emily Anne

2017-08-01

Loss of embryonic ion channel function leads to morphological defects, but the underlying reason for these defects remains elusive. Here, we show that inwardly rectifying potassium (Irk) channels regulate release of the Drosophila bone morphogenetic protein Dpp in the developing fly wing and that this is necessary for developmental signaling. Inhibition of Irk channels decreases the incidence of distinct Dpp-GFP release events above baseline fluorescence while leading to a broader distribution of Dpp-GFP. Work by others in different cell types has shown that Irk channels regulate peptide release by modulating membrane potential and calcium levels. We found calcium transients in the developing wing, and inhibition of Irk channels reduces the duration and amplitude of calcium transients. Depolarization with high extracellular potassium evokes Dpp release. Taken together, our data implicate Irk channels as a requirement for regulated release of Dpp, highlighting the importance of the temporal pattern of Dpp presentation for morphogenesis of the wing. © 2017. Published by The Company of Biologists Ltd.

Ca2+ Entry is Required for Mechanical Stimulation-induced ATP Release from Astrocyte

Science.gov (United States)

Lee, Jaekwang; Chun, Ye-Eun; Han, Kyung-Seok; Lee, Jungmoo; Woo, Dong Ho

2015-01-01

Astrocytes and neurons are inseparable partners in the brain. Neurotransmitters released from neurons activate corresponding G protein-coupled receptors (GPCR) expressed in astrocytes, resulting in release of gliotransmitters such as glutamate, D-serine, and ATP. These gliotransmitters in turn influence neuronal excitability and synaptic activities. Among these gliotransmitters, ATP regulates the level of network excitability and is critically involved in sleep homeostasis and astrocytic Ca2+ oscillations. ATP is known to be released from astrocytes by Ca2+-dependent manner. However, the precise source of Ca2+, whether it is Ca2+ entry from outside of cell or from the intracellular store, is still not clear yet. Here, we performed sniffer patch to detect ATP release from astrocyte by using various stimulation. We found that ATP was not released from astrocyte when Ca2+ was released from intracellular stores by activation of Gαq-coupled GPCR including PAR1, P2YR, and B2R. More importantly, mechanical stimulation (MS)-induced ATP release from astrocyte was eliminated when external Ca2+ was omitted. Our results suggest that Ca2+ entry, but not release from intracellular Ca2+ store, is critical for MS-induced ATP release from astrocyte. PMID:25792866

Health impacts of large releases of radionuclides. Proceedings

International Nuclear Information System (INIS)

Lake, J.V.; Bock, G.R.; Cardew, Gail

1997-01-01

There have been various large-scale releases of radionuclides into the environment in the 20th century. Some of these have been accidental and some deliberate. In order to minimize the risk to human health of such releases, it is important that we understand how these substances are transported throughout the terrestrial and aquatic environments and the ways in which they can ultimately affect human health. This book contains contributions from the world's leading radioecologists and health scientists who discuss the progress in understanding these transport processes and exposure pathways of radionuclides to humans; the problems and latest techniques of quantitating retrospectively the actual doses received by individuals; the time course of effects of exposure in relation to structure and function at the cellular tissue, organ and whole organism level; the genetic effects, and effects on reproductive health, in populations and individuals, including fetal effects in pregnant women and inherited genetic effects; and scientific approaches to evaluate the important problem of the mental health consequences of perceived risk of radiation damage to health. (author)

A randomized clinical trial of methadone maintenance for prisoners: findings at 6 months post-release.

Science.gov (United States)

Gordon, Michael S; Kinlock, Timothy W; Schwartz, Robert P; O'Grady, Kevin E

2008-08-01

This study examined the effectiveness of methadone maintenance initiated prior to or just after release from prison at 6 months post-release. A three-group randomized controlled trial was conducted between September 2003 and June 2005. A Baltimore pre-release prison. Two hundred and eleven adult pre-release inmates who were heroin-dependent during the year prior to incarceration. Participants were assigned randomly to the following: counseling only: counseling in prison, with passive referral to treatment upon release (n = 70); counseling + transfer: counseling in prison with transfer to methadone maintenance treatment upon release (n = 70); and counseling + methadone: methadone maintenance and counseling in prison, continued in a community-based methadone maintenance program upon release (n = 71). Addiction Severity Index at study entry and follow-up. Additional assessments at 6 months post-release were treatment record review; urine drug testing for opioids, cocaine and other illicit drugs. Counseling + methadone participants were significantly more likely than both counseling only and counseling + transfer participants to be retained in drug abuse treatment (P = 0.0001) and significantly less likely to have an opioid-positive urine specimen compared to counseling only (P = 0.002). Furthermore, counseling + methadone participants reported significantly fewer days of involvement in self-reported heroin use and criminal activity than counseling only participants. Methadone maintenance, initiated prior to or immediately after release from prison, increases treatment entry and reduces heroin use at 6 months post-release compared to counseling only. This intervention may be able to fill an urgent treatment need for prisoners with heroin addiction histories.

Staphylococcus aureus and influenza A virus stimulate human bronchoalveolar cells to release histamine and leukotrienes

DEFF Research Database (Denmark)

Clementsen, P; Bisgaard, H; Pedersen, M

1989-01-01

persons were stimulated with Staph. aureus no release of leukotriene C4 was found. The mediator release caused by bacteria and virus might be of importance for the exacerbation of bronchial asthma in upper respiratory tract infections, since histamine is assumed to increase the epithelial permeability...

Risk assessment based on current release standards for radioactive surface contamination

International Nuclear Information System (INIS)

Chen, S.Y.

1993-09-01

Standards for uncontrolled releases of radioactive surface contamination have been in existence in the United States for about two decades. Such standards have been issued by various agencies, including the US Department of Energy. This paper reviews the technical basis of published standards, identifies areas in need of revision, provides risk interpretations based on current technical knowledge and the regulatory environment, and offers suggestions for improvements

Monitoring of released radioactive gaseous and liquid effluent at Rokkasho Reprocessing Plant

International Nuclear Information System (INIS)

Oka, M.; Keta, S.; Nagai, S.; Kano, M.; Ishihara, N.; Moriyama, T.; Ogaki, K.; Noda, K.

2009-01-01

Rokkasho Reprocessing Plant (RRP) Rokkasho Reprocessing Plant started its active tests with spent fuel at the end of March 2006. When spent fuels are sheared and dissolved, radioactive gaseous effluent and radioactive liquid effluent such as krypton-85, tritium, etc. are released into the environment. In order to limit the public dose as low as reasonably achievable in an efficient way, RRP removes radioactive material by evaporation, rinsing, filtering, etc., and then releases it through the main stack and the sea discharge pipeline that allow to make dispersion and dilution very efficiently. Also, concerning the radioactive gaseous and liquid effluent to be released into the environment, the target values of annual release have been defined in the Safety Rule based on the estimated annual release evaluated at the safety review of RRP. By monitoring the radioactive material in gaseous exhaust and liquid effluent RRP controls it not to exceed the target values. RRP reprocessed 430 tUpr of spent fuel during Active Test (March 2006 to October 2008). In this report, we report about: The outline of gaseous and liquid effluent monitoring. The amount of radioactive gaseous and liquid effluent during the active test. The performance of removal of radioactive materials in gaseous and liquid effluents. The impact on the public from radioactive effluents during the active test. (author)

Identification and assessment of containment and release management strategies

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Neogy, P.

1993-01-01

Brookhaven National Laboratory, under the auspices of the U.S. Nuclear Regulatory Commission, is investigating accident management strategies which could help preserve containment integrity or minimize the release of radioactivity during a severe accident in a nuclear reactor. The objective is to make use of existing plant systems and equipment in innovative ways to reduce the likelihood of containment failure or to mitigate the release of fission products to the environment if failure cannot be prevented. Many of these strategies would be implemented during the later stages of a severe accident, i.e. after the molten core penetrates the reactor vessel. Significant uncertainties exist regarding some of the phenomena involved with this phase of a severe accident. The identification and assessment process for containment and release strategies is described, and some insights derived from its application to a BWR Mark I plant are presented. A station blackout accident for this kind of plant is considered. The challenges encountered are identified and existing emergency guidelines are reviewed, where needed and when possible, new strategies are devised. The feasibility and effectiveness of these new strategies are assessed, making due allowances for the complicated phenomena and associated uncertainties involved. Both beneficial and adverse effects of the suggested strategies are considered. (orig.)

Ecological reconcentrations of radionuclides released by nuclear industry

International Nuclear Information System (INIS)

Schaeffer, R.

1977-01-01

An attempt is made to assess the relative importance of the various pathways to man by relating the doses that in the most unfavorable conditions might result from long-term environmental accumulation of the radionuclides to the doses resulting from air inhalation or water ingestion only. For instance, for 131 I released in air, the ratio may reach a value of 1,000 from milk consumption and 3 from consumption of leafy vegetables. For 137 Cs released in water, the ratio may reach a value of 20 from the food chain contamination and 500 on account of external exposure from sediments. However, in spite of these high ratios, the absolute values of the total doses received remain low since the exposures corresponding to air inhalation or water ingestion are usually unsignificant. For water releases, attention is called on the misinterpretations that might result from generalizing the concentration factor values reported in the literature on account of their variations both in time and space: this factor ought to be calculated for each point of the environment on the basis of hydrological data [fr

Driving and Epilepsy: a Review of Important Issues.

Science.gov (United States)

Kang, Joon Y; Mintzer, Scott

2016-09-01

Driving restrictions in people with epilepsy (PWE) is a highly contentious topic. The fundamental difficulty lies in achieving a balance between safety and practicality. The aim of this review is to provide an overview, history, and rationale behind current laws regarding driving restriction in PWE. We also discuss recent findings that may be helpful to practitioners during individual discussions with PWE including seizure recurrence risk after first seizure, recurrent seizure, and anticonvulsant with drawl and driving restrictions in patients with psychogenic non-epileptic seizures (PNES).

7 CFR 944.28 - Avocado Import Grade Regulation.

Science.gov (United States)

2010-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

Release Notes for Whisper-1.1

Energy Technology Data Exchange (ETDEWEB)

Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Alwin, Jennifer Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-04-27

Whisper is a statistical analysis package developed in 2014 to support nuclear criticality safety (NCS) validation [1-3]. It uses the sensitivity profile data for an application as computed by MCNP6 [4-6] along with covariance files [7,8] for the nuclear data to determine a baseline upper-subcritical-limit (USL) for the application. Whisper version 1.0 was first developed and used at LANL in 2014 [3]. During 2015-2016, Whisper was updated to version 1.1 [9] and is to be included with the upcoming release of MCNP6.2. This document describes the Whisper-1.1 package that will be included with the MCNP6.2 release during 2017. Specific details are provided on the computer systems supported, the software quality assurance (SQA) procedures, installation, and testing. This document does not address other important topics, such as the importance of sensitivity-uncertainty (SU) methods to NCS validation, the theory underlying SU methodology, tutorials on the usage of MCNP-Whisper, practical approaches to using SU methodology to support and extend traditional validation, etc. There are over 50 documents included with Whisper-1.1 and available in the MCNP Reference Collection on the MCNP website (mcnp.lanl.gov) that address all of those topics and more. In this document, however, a complete bibliography of relevant MCNP-Whisper references is provided.

Clinical skill center: a review of present situation and importance in medical education curriculum

Directory of Open Access Journals (Sweden)

Haleh Talaei

2002-07-01

Full Text Available Clinical skill centers were designed in 1960, offers innovative, more effective clinical health care and treatment curriculum. Clinical skill center (CSC can provide a special facility for clinical and communication skills practice in a setting outside hospital wards in order to train students with enough confidence of confronting real patients. Learning clinical skills in these centers are not patient-dependent and by practicing on manikins and simulated models errors in real patients can be prevented. Moreover, possible feedback of this method can be used for evaluation and can improve quality and quantity of the education. This review intends to determine the purpose, undertaking, and structure of CSC. The study emphasizes the importance of integrating the clinical skill centers into the teaching curriculum of medical universities. Apparently, organizing clinical skill centers can play an important role for improving the quality and quantity of the educational system and consequently post-graduate performance. The authors recommend this program can be a solution for having both the knowledge and skill of diagnosis and treatment seasonal and rare diseases. Key words clinical skill center, medical education, curriculum

Controlled-release, pegylation, liposomal formulations: new mechanisms in the delivery of injectable drugs.

Science.gov (United States)

Reddy, K R

2000-01-01

To review recent developments in novel injectable drug delivery mechanisms and outline the advantages and disadvantages of each. A MEDLINE (1995-January 2000) search using the terms polyethylene glycol, liposomes, polymers, polylactic acid, and controlled release was conducted. Additional references were identified by scanning bibliographies. All articles were considered for inclusion. Abstracts were included only if they were judged to add critical information not otherwise available in the medical literature. A number of systems that alter the delivery of injectable drugs have been developed in attempts to improve pharmacodynamic and pharmacokinetic properties of therapeutic agents. New drug delivery systems can be produced either through a change in formulation (e.g., continuous-release products, liposomes) or an addition to the drug molecule (e.g., pegylation). Potential advantages of new delivery mechanisms include an increased or prolonged duration of pharmacologic activity, a decrease in adverse effects, and increased patient compliance and quality of life. Injectable continuous-release systems deliver drugs in a controlled, predetermined fashion and are particularly appropriate when it is important to avoid large fluctuations in plasma drug concentrations. Encapsulating a drug within a liposome can produce a prolonged half-life and a shift of distribution toward tissues with increased capillary permeability (e.g., tumors, infected tissue). Pegylation provides a method for modification of therapeutic proteins to minimize many of the limitations (e.g., poor stability, short half-life, immunogenicity) associated with these agents. Pegylation of therapeutic proteins is an established process with new applications. However, not all pegylated proteins are alike, and each requires optimization on a protein-by-protein basis to derive maximum clinical benefit. The language required to describe each pegylated therapeutic protein must be more precise to accurately

Importance of safety review to the safe operation of a nuclear plant

International Nuclear Information System (INIS)

Brinkerhoff, L.C.

1978-01-01

Widely differing standards of construction of nuclear reactors are employed in different countries. Although the reactor vendors, including designers and construction contractors, have a vested interest in safety, the ultimate responsibility for safety rests with the reactor facility operator. Even though governmental agencies, either directly or indirectly, must take a strong lead in developing policies and practices of safe operation, the reactor facility operator must recognize and accept the full responsibility for safe operation of the facility. The policies and practices of safe operation imposed by governmental agencies must help assure the prudent operation and the adequate maintenance of those structures, systems, and components of importance to safety. Since each country has a slightly different philosophy for achieving safety and each vendor utilizes different structures, systems, and components to fulfil this philosophy, it is imperative that the facility operator adequately maintain those engineered safety features and those plant protective systems which have been engineered into achieving the desired levels of safety. An additional method of helping to assure that those structures, systems, and components of importance to safety are prudently operated and adequately maintained is to assign the full safety responsibility for the overall operations of the reactor facility to the operating organization, i.e. assigning a 'line of responsibility' within the reactor facility operator. This assurance can be further strengthened by requiring that the facility operator establish a safety review body that overviews the operation and assures that the operating organization complies with those policies and practices of safe operation which have been imposed on the reactor facility. (author)

The Importance of Information Management for the Professional Performance of the Executive Secretary - an Integrative National Literature Review.

Directory of Open Access Journals (Sweden)

Nuriane Santos Montezano

2015-08-01

Full Text Available The article presents the reality of the new Executive Secretariat professional and its relation to the Strategic Information System. All the concepts were worked out based on the national integrative literature review. The aim was to determine what is the importance of information management and its applicability to the professional context of the Executive Secretariat. The discussion and theoretical reflection showed that the current Executive Secretary professional is prepared for the new organizational dynamics to incorporate technologically execution management information in context. This is another task that gives and confirms its multifunctional character as an important information manager figure in decision-making organizations.