WorldWideScience

Sample records for release oral dosage

  1. Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

    NARCIS (Netherlands)

    Jantratid, E; Prakongpan, S; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Barends, D M

    2006-01-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned

  2. Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

    NARCIS (Netherlands)

    Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D I R K W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

    2018-01-01

    Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To clarify the Biopharmaceutics Classification System (BCS) classification, experimental solubility and

  3. Biowaiver monographs for immediate release solid oral dosage forms: efavirenz.

    Science.gov (United States)

    Cristofoletti, Rodrigo; Nair, Anita; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Dressman, Jennifer B

    2013-02-01

    Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence testing for the approval of immediate-release (IR) solid oral dosage forms containing efavirenz as the only active pharmaceutical ingredient (API) are reviewed. Because of lack of conclusive data about efavirenz's permeability and its failure to comply with the "high solubility" criteria according to the Biopharmaceutics Classification System (BCS), the API can be classified as BCS Class II/IV. In line with the solubility characteristics, the innovator product does not meet the dissolution criteria for a "rapidly dissolving product." Furthermore, product variations containing commonly used excipients or in the manufacturing process have been reported to impact the rate and extent of efavirenz absorption. Despite its wide therapeutic index, subtherapeutic levels of efavirenz can lead to treatment failure and also facilitate the emergence of efavirenz-resistant mutants. For all these reasons, a biowaiver for IR solid oral dosage forms containing efavirenz as the sole API is not scientifically justified for reformulated or multisource drug products. Copyright © 2012 Wiley Periodicals, Inc.

  4. Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Folic Acid.

    Science.gov (United States)

    Hofsäss, Martin A; Souza, Jacqueline de; Silva-Barcellos, Neila M; Bellavinha, Karime R; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Parr, Alan; Langguth, Peter; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Mehta, Mehul U; Dressman, Jennifer B

    2017-12-01

    This work presents a review of literature and experimental data relevant to the possibility of waiving pharmacokinetic bioequivalence studies in human volunteers for approval of immediate-release solid oral pharmaceutical forms containing folic acid as the single active pharmaceutical ingredient. For dosage forms containing 5 mg folic acid, the highest dose strength on the World Health Organization Essential Medicines List, the dose/solubility ratio calculated from solubility studies was higher than 250 mL, corresponding to a classification as "not highly soluble." Small, physiological doses of folic acid (≤320 μg) seem to be absorbed completely via active transport, but permeability data for higher doses of 1-5 mg are inconclusive. Following a conservative approach, folic acid is classified as a Biopharmaceutics Classification System class IV compound until more reliable data become available. Commensurate with its solubility characteristics, the results of dissolution studies indicated that none of the folic acid products evaluated showed rapid dissolution in media at pH 1.2 or 4.5. Therefore, according to the current criteria of the Biopharmaceutics Classification System, the biowaiver approval procedure cannot be recommended for immediate-release solid oral dosage forms containing folic acid. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  5. Biowaiver monograph for immediate-release solid oral dosage forms: bisoprolol fumarate.

    Science.gov (United States)

    Charoo, Naseem A; Shamsher, Areeg A A; Lian, Lai Y; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

    2014-02-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing bisoprolol as the sole active pharmaceutical ingredient (API) are reviewed. Bisoprolol is classified as a Class I API according to the current Biopharmaceutics Classification System (BCS). In addition to the BCS class, its therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability problems are taken into consideration. Qualitative compositions of IR tablet dosage forms of bisoprolol with a marketing authorization (MA) in ICH (International Conference on Harmonisation) countries are tabulated. It was inferred that these tablets had been demonstrated to be bioequivalent to the innovator product. No reports of failure to meet BE standards have been made in the open literature. On the basis of all these pieces of evidence, a biowaiver can currently be recommended for bisoprolol fumarate IR dosage forms if (1) the test product contains only excipients that are well known, and used in normal amounts, for example, those tabulated for products with MA in ICH countries and (2) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving with similarity of the dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  6. Biowaiver monograph for immediate-release solid oral dosage forms: fluconazole.

    Science.gov (United States)

    Charoo, Naseem; Cristofoletti, Rodrigo; Graham, Alexandra; Lartey, Paul; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

    2014-12-01

    Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence (BE) testing requirements for the approval of immediate release (IR) solid oral dosage forms containing fluconazole as the only active pharmaceutical ingredient (API) are reviewed. The decision is based on solubility, dissolution, permeability, therapeutic index, pharmacokinetic parameters, pharmacodynamic properties, and other relevant data. BE/bioavailability (BA) problems and drug-excipients interaction data were also reviewed and taken into consideration. According to the biopharmaceutics classification system (BCS), fluconazole in polymorphic forms II and III is a BCS class I drug and has a wide therapeutic index. BE of test formulations from many different manufacturers containing different excipients confirmed that the risk of bioinequivalence because of formulation and manufacturing factors is low. It was inferred that risk can be further reduced if in vitro studies are performed according to biowaiver guidelines. Thus, it is concluded that a biowaiver can be recommended for fluconazole IR dosage forms if (a) fluconazole is present as polymorphic form II or III or any other form/mixture showing high solubility, (b) the selection of excipients be limited to those found in IR drug products approved in International Conference on Harmonisation (ICH) countries for the same dosage form and used in their usual amounts, and (c) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving throughout the shelf life with similar dissolution profiles at pH 1.2, 4.5, and 6.8. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  7. Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

    Science.gov (United States)

    Plöger, Gerlinde F; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, Dirk W; Langguth, Peter; Mehta, Mehul U; Parr, Alan; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Dressman, Jennifer B

    2018-07-01

    Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To elucidate the Biopharmaceutics Classification System (BCS) classification, experimental solubility and dissolution studies were also carried out. The antimalarial proguanil hydrochloride, effective via the parent compound proguanil and the metabolite cycloguanil, is not considered to be a narrow therapeutic index drug. Proguanil hydrochloride salt was shown to be highly soluble according to the U.S. Food and Drug Administration, World Health Organization, and European Medicines Agency guidelines, but data for permeability are inconclusive. Therefore, proguanil hydrochloride is conservatively classified as a BCS class 3 substance. In view of this information and the assessment of risks associated with a false positive decision, a BCS-based biowaiver approval procedure can be recommended for orally administered solid immediate release products containing proguanil hydrochloride, provided well-known excipients are used in usual amounts and provided the in vitro dissolution of the test and reference products is very rapid (85% or more are dissolved in 15 min at pH 1.2, 4.5, and 6.8) and is performed according to the current requirements for BCS-based biowaivers. Copyright © 2018 American Pharmacists Association®. All rights reserved.

  8. Biowaiver monographs for immediate release solid oral dosage forms: piroxicam.

    Science.gov (United States)

    Shohin, Igor E; Kulinich, Julia I; Ramenskaya, Galina V; Abrahamsson, Bertil; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Groot, D W; Barends, Dirk M; Dressman, Jennifer B

    2014-02-01

    Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing piroxicam in the free acid form are reviewed. Piroxicam solubility and permeability, its therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA), and corresponding dissolution data are taken into consideration. The available data suggest that according to the current biopharmaceutics classification system (BCS) and all current guidances, piroxicam would be assigned to BCS Class II. The extent of piroxicam absorption seems not to depend on manufacturing conditions or excipients, so the risk of bioinequivalence in terms of area under the curve (AUC) is very low, but the rate of absorption (i.e., BE in terms of Cmax ) can be affected by the formulation. Current in vitro dissolution methods may not always reflect differences in terms of Cmax for BCS Class II weak acids; however, minor differences in absorption rate of piroxicam would not subject the patient to unacceptable risks: as piroxicam products may be taken before or after meals, the rate of absorption cannot be considered crucial to drug action. Therefore, a biowaiver for IR piroxicam solid oral dosage form is considered feasible, provided that (a) the test product contains only excipients, which are also present in IR solid oral drug products containing piroxicam, which have been approved in ICH or associated countries, for instance, those presented in Table 3 of this paper; (b) both the test and comparator drug products dissolve 85% in 30 min or less at pH 1.2, 4.5, and 6.8; and (c) the test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8. When not all of these conditions can be fulfilled, BE of the products should be established in vivo. © 2013 Wiley Periodicals, Inc. and the

  9. Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Amoxicillin Trihydrate.

    Science.gov (United States)

    Thambavita, Dhanusha; Galappatthy, Priyadarshani; Mannapperuma, Uthpali; Jayakody, Lal; Cristofoletti, Rodrigo; Abrahamsson, Bertil; Groot, Dirk W; Langguth, Peter; Mehta, Mehul; Parr, Alan; Polli, James E; Shah, Vinod P; Dressman, Jennifer

    2017-10-01

    Literature and experimental data relevant to waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release solid oral dosage forms containing amoxicillin trihydrate are reviewed. Solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), therapeutic uses, therapeutic index, excipient interactions, as well as dissolution and BE and bioavailability studies were taken into consideration. Solubility and permeability studies indicate that amoxicillin doses up to 875 mg belong to BCS class I, whereas 1000 mg belongs to BCS class II and doses of more than 1000 mg belong to BCS class IV. Considering all aspects, the biowaiver procedure can be recommended for solid oral products of amoxicillin trihydrate immediate-release preparations containing amoxicillin as the single active pharmaceutical ingredient at dose strengths of 875 mg or less, provided (a) only the excipients listed in this monograph are used, and only in their usual amounts, (b) the biowaiver study is performed according to the World Health Organization-, U.S. Food and Drug Administration-, or European Medicines Agency-recommended method using the innovator as the comparator, and (c) results comply with criteria for "very rapidly dissolving" or "similarly rapidly dissolving." Products containing other excipients and those containing more than 875 mg amoxicillin per unit should be subjected to an in vivo BE study. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  10. Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Enalapril.

    Science.gov (United States)

    Verbeeck, Roger K; Kanfer, Isadore; Löbenberg, Raimar; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Langguth, Peter; Polli, James E; Parr, Alan; Shah, Vinod P; Mehta, Mehul; Dressman, Jennifer B

    2017-08-01

    Literature data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the marketing authorization of immediate-release, solid oral dosage forms containing enalapril maleate are reviewed. Enalapril, a prodrug, is hydrolyzed by carboxylesterases to the active angiotensin-converting enzyme inhibitor enalaprilat. Enalapril as the maleate salt is shown to be highly soluble, but only 60%-70% of an orally administered dose of enalapril is absorbed from the gastrointestinal tract into the enterocytes. Consequently, enalapril maleate is a Biopharmaceutics Classification System class III substance. Because in situ conversion of the maleate salt to the sodium salt is sometimes used in production of the finished drug product, not every enalapril maleate-labeled finished product actually contains the maleate salt. Enalapril is not considered to have a narrow therapeutic index. With this background, a biowaiver-based approval procedure for new generic products or after major revisions to existing products is deemed acceptable, provided the in vitro dissolution of both test and reference preparation is very rapid (at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Additionally, the test and reference product must contain the identical active drug ingredient. Copyright © 2017 American Pharmacists Association®. All rights reserved.

  11. On the exfoliating polymeric cellular dosage forms for immediate drug release.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2016-06-01

    The most prevalent pharmaceutical dosage forms at present-the oral immediate-release tablets and capsules-are granular solids. Though effective in releasing drug rapidly, development and manufacture of such dosage forms are fraught with difficulties inherent to particulate processing. Predictable dosage form manufacture could be achieved by liquid-based processing, but cast solid dosage forms are not suitable for immediate drug release due to their resistance to fluid percolation. To overcome this limitation, we have recently introduced cellular dosage forms that can be readily prepared from polymeric melts. It has been shown that open-cell structures comprising polyethylene glycol 8000 (PEG 8k) excipient and a drug exfoliate upon immersion in a dissolution medium. The drug is then released rapidly due to the large specific surface area of the exfoliations. In this work, we vary the molecular weight of the PEG excipient and investigate its effect on the drug release kinetics of structures with predominantly open-cell topology. We demonstrate that the exfoliation rate decreases substantially if the excipient molecular weight is increased from 12 to 100kg/mol, which causes the drug dissolution time to increase by more than a factor of ten. A model is then developed to elucidate the exfoliation behavior of cellular structures. Diverse transport processes are considered: percolation due to capillarity, diffusion of dissolution medium through the cell walls, and viscous flow of the saturated excipient. It is found that the lower exfoliation rate and the longer dissolution time of the dosage forms with higher excipient molecular weight are primarily due to the greater viscosity of the cell walls after fluid penetration. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. 21 CFR 520.1696 - Penicillin oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin oral dosage forms. 520.1696 Section 520.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1696 Penicillin oral...

  13. 21 CFR 520.45 - Albendazole oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Albendazole oral dosage forms. 520.45 Section 520.45 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.45 Albendazole oral...

  14. 21 CFR 520.905 - Fenbendazole oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Fenbendazole oral dosage forms. 520.905 Section 520.905 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Fenbendazole oral dosage forms. ...

  15. Accelerated in-vitro release testing methods for extended-release parenteral dosage forms.

    Science.gov (United States)

    Shen, Jie; Burgess, Diane J

    2012-07-01

    This review highlights current methods and strategies for accelerated in-vitro drug release testing of extended-release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in-situ depot-forming systems and implants. Extended-release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, 'real-time' in-vitro release tests for these dosage forms are often run over a long time period. Accelerated in-vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in-vitro release methods using United States Pharmacopeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended-release parenteral dosage forms, along with the accelerated in-vitro release testing methods currently employed are discussed. Accelerated in-vitro release testing methods with good discriminatory ability are critical for quality control of extended-release parenteral products. Methods that can be used in the development of in-vitro-in-vivo correlation (IVIVC) are desirable; however, for complex parenteral products this may not always be achievable. © 2012 The Authors. JPP © 2012 Royal Pharmaceutical Society.

  16. Accelerated in vitro release testing methods for extended release parenteral dosage forms

    Science.gov (United States)

    Shen, Jie; Burgess, Diane J.

    2012-01-01

    Objectives This review highlights current methods and strategies for accelerated in vitro drug release testing of extended release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in situ depot-forming systems, and implants. Key findings Extended release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, “real-time” in vitro release tests for these dosage forms are often run over a long time period. Accelerated in vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in vitro release methods using United States Pharmacopoeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended release parenteral dosage forms, along with the accelerated in vitro release testing methods currently employed are discussed. Conclusions Accelerated in vitro release testing methods with good discriminatory ability are critical for quality control of extended release parenteral products. Methods that can be used in the development of in vitro-in vivo correlation (IVIVC) are desirable, however for complex parenteral products this may not always be achievable. PMID:22686344

  17. Applications of Polymers as Pharmaceutical Excipients in Solid Oral Dosage Forms.

    Science.gov (United States)

    Debotton, Nir; Dahan, Arik

    2017-01-01

    Over the last few decades, polymers have been extensively used as pharmaceutical excipients in drug delivery systems. Pharmaceutical polymers evolved from being simply used as gelatin shells comprising capsule to offering great formulation advantages including enabling controlled/slow release and specific targeting of drugs to the site(s) of action (the "magic bullets" concept), hence hold a significant clinical promise. Oral administration of solid dosage forms (e.g., tablets and capsules) is the most common and convenient route of drug administration. When formulating challenging molecules into solid oral dosage forms, polymeric pharmaceutical excipients permit masking undesired physicochemical properties of drugs and consequently, altering their pharmacokinetic profiles to improve the therapeutic effect. As a result, the number of synthetic and natural polymers available commercially as pharmaceutical excipients has increased dramatically, offering potential solutions to various difficulties. For instance, the different polymers may allow increased solubility, swellability, viscosity, biodegradability, advanced coatings, pH dependency, mucodhesion, and inhibition of crystallization. The aim of this article is to provide a wide angle prospect of the different uses of pharmaceutical polymers in solid oral dosage forms. The various types of polymeric excipients are presented, and their distinctive role in oral drug delivery is emphasized. The comprehensive know-how provided in this article may allow scientists to use these polymeric excipients rationally, to fully exploit their different features and potential influence on drug delivery, with the overall aim of making better drug products. © 2016 Wiley Periodicals, Inc.

  18. Influence of Postprandial Intragastric Pressures on Drug Release from Gastroretentive Dosage Forms.

    Science.gov (United States)

    Schneider, Felix; Hoppe, Melanie; Koziolek, Mirko; Weitschies, Werner

    2018-05-29

    Despite extensive research in the field of gastroretentive dosage forms, this "holy grail" of oral drug delivery yet remained an unmet goal. Especially under fasting conditions, the reproducible retention of dosage forms in the stomach seems to be an impossible task. This is why such systems are often advised to be taken together with food. But also the postprandial motility can contribute significantly to the failure of gastroretentive dosage forms. To investigate the influence of postprandial pressure conditions on drug release from such systems, we used a novel in vitro dissolution tool, the dissolution stress test device. With the aid of this device, we simulated three different intragastric pressure profiles that may occur after postprandial intake. These transit scenarios were based on recently obtained, postprandial SmartPill® data. The tested systems, Glumetza® 1000 and Madopar® HBS 125, are marketed dosage forms that are based on different approaches to achieve proper gastric retention. All three transit scenarios revealed a highly pressure-sensitive drug release behavior, for both drugs. For Madopar® HBS 125, nearly complete drug release was observed even after early occurring pressures. Glumetza® 1000 seemed to be more resistant to these, most likely due to incomplete wetting of the system. On the contrary to these findings, data from standard dissolution tests using the paddle apparatus displayed controlled drug release for both systems for about 6 h. Based on these results, it can be doubted that established gastroretentive systems stay intact over a longer period of time, even under postprandial conditions.

  19. 21 CFR 330.3 - Imprinting of solid oral dosage form drug products.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Imprinting of solid oral dosage form drug products... AS SAFE AND EFFECTIVE AND NOT MISBRANDED General Provisions § 330.3 Imprinting of solid oral dosage form drug products. A requirement to imprint an identification code on solid oral dosage form drug...

  20. Preparation and characterization of solid oral dosage forms containing soy isoflavones

    Directory of Open Access Journals (Sweden)

    Stela R. de Oliveira

    2013-02-01

    Full Text Available Soy isoflavones have been extensively used for menopausal symptoms and prevention of hormone-related cancer, osteoporosis and cardiovascular diseases. Commercially available forms of isoflavones include supplements, capsules and tablets. However, the non-standardization of soy isoflavones extracts and different dissolution profiles of these solid dosage forms highlight the need of additional studies on the development of well characterized pharmaceutical dosage forms of isoflavones. In this work, immediate release oral tablets of soy isoflavones were obtained and evaluated. Genistein and daidzein, were the main constituents of the dried soy extract. Preparation of the tables was accomplished in a rotary tableting machine following either a dry mixture for direct compression or wet granulation with different excipients. Powder, granules and tablets were evaluated for several parameters, including flow properties, Carr and Hausner indexes, hardness, friability, disintegration time and drug release profile. Also, a fast and validated HPLC analytical method for both genistein and daidzein was developed. Formulations containing sodium croscarmellose and sodium dodecyl sulfate resulted in better flowability as indicated by the flow rate and angle of repose, faster disintegration time and immediate release dissolution profile.

  1. [Oral films as perspective dosage form].

    Science.gov (United States)

    Walicová, Veronika; Gajdziok, Jan

    Oral films, namely buccal mucoadhesive films and orodispersible films represent innovative formulations for administration of a wide range of drugs. Oral films show many advantageous properties and are intended for systemic drug delivery or for local treatment of the oral mucosa. In both cases, the film represents a thin layer, which could be intended to adhere to the oral mucosa by means of mucoadhesion; or to rapid dissolution and subsequent swallowing without the need of liquid intake, in the case of orodispersible films. Main constitutive excipients are film-forming polymers, which must in the case of mucoadhesive forms remain on the mucosa within the required time interval. Oral films are currently available on the pharmaceutical market and could compete with conventional oral dosage forms in the future. oral cavity oral films buccal mucoadhesive films orodispersible films film-forming polymers.

  2. Semi-solid dosage form of clonazepam for rapid oral mucosal absorption.

    Science.gov (United States)

    Sakata, Osamu; Machida, Yoshiharu; Onishi, Hiraku

    2011-07-01

    In order to obtain an alternative to the intravenous (i.v.) dosage form of clonazepam (CZ), an oral droplet formulation of CZ was developed previously; however, the droplet was physically unstable. Therefore, in the present study, it was attempted to develop an easily-handled dosage form, which was more physically stable and allowed rapid drug absorption from oral mucosa. A semi-solid dosage form, composed of polyethylene glycol 1500 (PEG), CZ, and oleic acid (OA) at 37/1/2 (w/w) and named PEG/CZ/OA, and a semi-solid dosage form containing PEG and CZ at 39/1 (w/w), called PEG/CZ, were prepared. Their physical stability in air at room temperature and oral mucosal absorption in rats were investigated. The semi-solid dosage forms were much more stable physically than the droplet, that is, no recrystallization of CZ was observed for at least 8 days. The effective concentration for humans and rats (20 ng/mL or more) was achieved within 30 min after buccal administration for both PEG/CZ/OA and PEG/CZ. The plasma concentration increased gradually and less varied at each time point for PEG/CZ/OA. PEG/CZ/OA was found to show more rapid and higher absorption of CZ in buccal administration than in sublingual administration. Buccal administration with the semi-solid dosage PEG/CZ with or without OA was suggested to be a possibly useful novel dosage form as an alternative to i.v. injection.

  3. Approaches for Establishing Clinically Relevant Dissolution Specifications for Immediate Release Solid Oral Dosage Forms.

    Science.gov (United States)

    Hermans, Andre; Abend, Andreas M; Kesisoglou, Filippos; Flanagan, Talia; Cohen, Michael J; Diaz, Dorys A; Mao, Y; Zhang, Limin; Webster, Gregory K; Lin, Yiqing; Hahn, David A; Coutant, Carrie A; Grady, Haiyan

    2017-11-01

    This manuscript represents the perspective of the Dissolution Analytical Working Group of the IQ Consortium. The intent of this manuscript is to highlight the challenges of, and to provide a recommendation on, the development of clinically relevant dissolution specifications (CRS) for immediate release (IR) solid oral dosage forms. A roadmap toward the development of CRS for IR products containing active ingredients with a non-narrow therapeutic window is discussed, within the context of mechanistic dissolution understanding, supported by in-human pharmacokinetic (PK) data. Two case studies present potential outcomes of following the CRS roadmap and setting dissolution specifications. These cases reveal some benefits and challenges of pursuing CRS with additional PK data, in light of current regulatory positions, including that of the US Food and Drug Administration (FDA), who generally favor this approach, but with the understanding that both industry and regulatory agency perspectives are still evolving in this relatively new field. The CRS roadmap discussed in this manuscript also describes a way to develop clinically relevant dissolution specifications based primarily on dissolution data for batches used in pivotal clinical studies, acknowledging that not all IR product development efforts need to be supported by additional PK studies, albeit with the associated risk of potentially unnecessarily tight manufacturing controls. Recommendations are provided on what stages during the life cycle investment into in vivo studies may be valuable. Finally, the opportunities for CRS within the context of post-approval changes, Modeling and Simulation (M&S), and the application of biowaivers, are briefly discussed.

  4. Biowaiver monograph for immediate-release solid oral dosage forms: acetylsalicylic acid.

    Science.gov (United States)

    Dressman, Jennifer B; Nair, Anita; Abrahamsson, Bertil; Barends, Dirk M; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Zimmer, Markus

    2012-08-01

    A biowaiver monograph for acetylsalicylic acid (ASA) is presented. Literature and experimental data indicate that ASA is a highly soluble and highly permeable drug, leading to assignment of this active pharmaceutical ingredient (API) to Class I of the Biopharmaceutics Classification System (BCS). Limited bioequivalence (BE) studies reported in the literature indicate that products that have been tested are bioequivalent. Most of the excipients used in products with a marketing authorization in Europe are not considered to have an impact on gastrointestinal motility or permeability. Furthermore, ASA has a wide therapeutic index. Thus, the risks to the patient that might occur if a nonbioequivalent product were to be incorrectly deemed bioequivalent according to the biowaiver procedure appear to be minimal. As a result, the BCS-based biowaiver procedure can be recommended for approval of new formulations of solid oral dosage forms containing ASA as the only API, including both multisource and reformulated products, under the following conditions: (1) excipients are chosen from those used in ASA products already registered in International Conference on Harmonization and associated countries and (2) the dissolution profiles of the test and the comparator products comply with the BE guidance. Copyright © 2012 Wiley Periodicals, Inc.

  5. Fourteen days oral administration of therapeutic dosage of some ...

    African Journals Online (AJOL)

    Fourteen days oral administration of therapeutic dosage of some antibiotics reduced serum testosterone in male rats. FO Awobajo, Y Raji, II Olatunji-Bello, FT Kunle-Alabi, AO Adesanya, TO Awobajo ...

  6. Oral controlled release drug delivery system and Characterization of oral tablets; A review

    Directory of Open Access Journals (Sweden)

    Muhammad Zaman

    2016-01-01

    Full Text Available Oral route of drug administration is considered as the safest and easiest route of drug administration. Control release drug delivery system is the emerging trend in the pharmaceuticals and the oral route is most suitable for such kind of drug delivery system. Oral route is more convenient for It all age group including both pediatric and geriatrics. There are various systems which are adopted to deliver drug in a controlled manner to different target sites through oral route. It includes diffusion controlled drug delivery systems; dissolution controlled drug delivery systems, osmotically controlled drug delivery systems, ion-exchange controlled drug delivery systems, hydrodynamically balanced systems, multi-Particulate drug delivery systems and microencapsulated drug delivery system. The systems are formulated using different natural, semi-synthetic and synthetic polymers. The purpose of the review is to provide information about the orally controlled drug delivery system, polymers which are used to formulate these systems and characterizations of one of the most convenient dosage form which is the tablets. 

  7. 78 FR 30197 - Oral Dosage Form New Animal Drugs; Clindamycin; Enrofloxacin

    Science.gov (United States)

    2013-05-22

    ...-0002] Oral Dosage Form New Animal Drugs; Clindamycin; Enrofloxacin AGENCY: Food and Drug Administration...- Tallaght, Dublin Oral Drops. 940. 24, Ireland. 200-551........ Putney, Inc., 400 Enrofloxacin Original....812 Enrofloxacin. (a) Specifications. Each tablet contains 22.7, 68.0, or 136.0 milligrams (mg) of...

  8. 21 CFR 520.1448 - Monensin oral dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Monensin oral dosage forms. 520.1448 Section 520.1448 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... distance the spots travel from the starting line divided by the distance the solvent front travels from the...

  9. Miniaturized approach for excipient selection during the development of oral solid dosage form

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Müllertz, Anette; Cornett, Claus

    2014-01-01

    The present study introduces a miniaturized high-throughput platform to understand the influence of excipients on the performance of oral solid dosage forms during early drug development. Wet massing of binary mixtures of the model drug (sodium naproxen) and representative excipients was followed...... for excipient selection and for early-stage performance testing of active pharmaceutical ingredient intended for oral solid dosage form. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:900-908, 2014....

  10. Klucel™ EF and ELF polymers for immediate-release oral dosage forms prepared by melt extrusion technology.

    Science.gov (United States)

    Mohammed, Noorullah Naqvi; Majumdar, Soumyajit; Singh, Abhilasha; Deng, Weibin; Murthy, Narasimha S; Pinto, Elanor; Tewari, Divya; Durig, Thomas; Repka, Michael A

    2012-12-01

    The objective of this research work was to evaluate Klucel™ hydroxypropylcellulose (HPC) EF and ELF polymers, for solubility enhancement as well as to address some of the disadvantages associated with solid dispersions. Ketoprofen (KPR), a Biopharmaceutics Classification System class II drug with poor solubility, was utilized as a model compound. Preliminary thermal studies were performed to confirm formation of a solid solution/dispersion of KPR in HPC matrix and also to establish processing conditions for hot-melt extrusion. Extrudates pelletized and filled into capsules exhibited a carrier-dependent release with ELF polymer exhibiting a faster release. Tablets compressed from milled extrudates exhibited rapid release owing to the increased surface area of the milled extrudate. Addition of mannitol (MNT) further enhanced the release by forming micro-pores and increasing the porosity of the extrudates. An optimized tablet formulation constituting KPR, MNT, and ELF in a 1:1:1 ratio exhibited 90% release in 15 min similar to a commercial capsule formulation. HPC polymers are non-ionic hydrophilic polymers that undergo polymer-chain-length-dependent solubilization and can be used to enhance solubility or dissolution rate of poorly soluble drugs. Dissolution/release rate could be tailored for rapid-release applications by selecting a suitable HPC polymer and altering the final dosage form. The release obtained from pellets was carrier-dependent and not drug-dependent, and hence, such a system can be effectively utilized to address solubility or precipitation issues with poorly soluble drugs in the gastrointestinal environment.

  11. Thermal and Isothermal Methods in Development of Sustained Release Dosage Forms of Ketorolac Tromethamine

    Directory of Open Access Journals (Sweden)

    Dimple Chopra

    2008-01-01

    Full Text Available Differential scanning calorimetry (DSC is a rapid and convenient and conclusive method of screening drug-polymer blend during preformulation studies as it allows polymer incompatibility to be established instantaneously. Various batches of matrix tablets of ketorolac tromethamine (KTM with a series of compatible polymers were prepared. Batches of tablets which gave desired sustained release profile were subjected to stability testing according to ICH guidelines. The analysis for drug content was done using high performance liquid chromatography (HPLC method. The results revealed that there was no statistically significant change in drug content after storage of matrix tablets at elevated temperature of 40°C and 75% relative humidity. From our study we conclude that with careful selection of different polymers and their combinations, a stable sustained release oral dosage form of ketorolac tromethamine can be achieved.

  12. Development of polymer film dosage forms of lidocaine for buccal administration. I. Penetration rate and release rate.

    Science.gov (United States)

    Okamoto, H; Taguchi, H; Iida, K; Danjo, K

    2001-12-13

    We examined the penetration rate of lidocaine (LC) through excised oral mucosa from hamster cheek pouch and the in vitro release rate of LC from film dosage forms with hydroxypropylcellulose (HPC) as a film base. Addition of glycyrrhizic acid (GL) to the HPC films increased the LC release rate almost GL-content-dependently, while an optimum GL content was observed for the LC penetration rate. No LC penetration was observed from an acidic aqueous solution (pH 3.4) of LC, suggesting only unionized LC can substantially penetrate through the mucosa. A significant relationship between the penetration rate of LC and the release rate of unionized LC was found, suggesting that the in vitro dissolution study is a useful tool to predict the penetration rate taking the unionized drug fraction into consideration.

  13. Simultaneous in vivo visualization and localization of solid oral dosage forms in the rat gastrointestinal tract by magnetic resonance imaging (MRI).

    Science.gov (United States)

    Christmann, V; Rosenberg, J; Seega, J; Lehr, C M

    1997-08-01

    Bioavailability of orally administered drugs is much influenced by the behavior, performance and fate of the dosage form within the gastrointestinal (GI) tract. Therefore, MRI in vivo methods that allow for the simultaneous visualization of solid oral dosage forms and anatomical structures of the GI tract have been investigated. Oral contrast agents containing Gd-DTPA were used to depict the lumen of the digestive organs. Solid oral dosage forms were visualized in a rat model by a 1H-MRI double contrast technique (magnetite-labelled microtablets) and a combination of 1H- and 19F-MRI (fluorine-labelled minicapsules). Simultaneous visualization of solid oral dosage forms and the GI environment in the rat was possible using MRI. Microtablets could reproducibly be monitored in the rat stomach and in the intestines using a 1H-MRI double contrast technique. Fluorine-labelled minicapsules were detectable in the rat stomach by a combination of 1H- and 19F-MRI in vivo. The in vivo 1H-MRI double contrast technique described allows solid oral dosage forms in the rat GI tract to be depicted. Solid dosage forms can easily be labelled by incorporating trace amounts of non-toxic iron oxide (magnetite) particles. 1H-MRI is a promising tool for observing such pharmaceutical dosage forms in humans. Combined 1H- and 19F-MRI offer a means of unambiguously localizing solid oral dosage forms in more distal parts of the GI tract. Studies correlating MRI examinations with drug plasma levels could provide valuable information for the development of pharmaceutical dosage forms.

  14. 76 FR 59023 - Oral Dosage Form New Animal Drugs; Tylosin

    Science.gov (United States)

    2011-09-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Tylosin AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  15. 77 FR 3927 - Oral Dosage Form New Animal Drugs; Deracoxib

    Science.gov (United States)

    2012-01-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Deracoxib AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  16. 76 FR 18648 - Oral Dosage Form New Animal Drugs; Robenacoxib

    Science.gov (United States)

    2011-04-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Robenacoxib AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  17. 76 FR 40808 - Oral Dosage Form New Animal Drugs; Amprolium

    Science.gov (United States)

    2011-07-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Amprolium AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  18. 77 FR 15960 - Oral Dosage Form New Animal Drugs; Pergolide

    Science.gov (United States)

    2012-03-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Pergolide AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  19. 75 FR 67031 - Oral Dosage Form New Animal Drugs; Domperidone

    Science.gov (United States)

    2010-11-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2010-N-0002] Oral Dosage Form New Animal Drugs; Domperidone AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  20. 76 FR 78149 - Oral Dosage Form New Animal Drugs; Estriol

    Science.gov (United States)

    2011-12-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 520 [Docket No. FDA-2011-N-0003] Oral Dosage Form New Animal Drugs; Estriol AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug...

  1. Optimal Antibiotic Dosage for Chronic Kidney Disease Patient: A Pharmacological Manual for Oral Clinicians.

    Science.gov (United States)

    Chidambaram, Ramasamy

    2015-01-01

    Chronic kidney disease, (CKD) a gradual and inevitable deterioration in renal function, is the disease with the most associations in dentistry. Dosage adjustment is one amongst the vital elements to be familiar with during their oral care. CKD patients take extended duration to filter out medications, therefore dosage must always be tailored under the supervision of nephrologist. The relished benefits from antibiotic could transform as anti-microbial resistance on their abuse and nephrotoxic when contraindicated drugs are encouraged. New patented drug belonging to oxazoliodine group has driven the researchers to handle the emerging AMR. The present communication discusses the pharmacological factors influencing in prescribing the antibiotics for CKD patient from the dentist's point of view. The formulas destined for calculating the optimal dosage of antibiotics have been documented to aid oral physicians.

  2. Zein as a Pharmaceutical Excipient in Oral Solid Dosage Forms: State of the Art and Future Perspectives.

    Science.gov (United States)

    Berardi, Alberto; Bisharat, Lorina; AlKhatib, Hatim S; Cespi, Marco

    2018-05-07

    Zein is the main storage protein of corn and it has several industrial applications. Mainly in the last 10-15 years, zein has emerged as a potential pharmaceutical excipient with unique features. Zein is a natural, biocompatible and biodegradable material produced from renewable sources. It is insoluble, yet due to its amphiphilic nature, it has self-assembling properties, which have been exploited for the formation of micromicroparticle and nanoparticle and films. Moreover, zein can hydrate so it has been used in swellable matrices for controlled drug release. Other pharmaceutical applications of zein in oral drug delivery include its incorporation in solid dispersions of poorly soluble drugs and in colonic drug delivery systems. This review describes the features of zein significant for its use as a pharmaceutical excipient for oral drug delivery, and it summaries the literature relevant to macroscopic zein-based oral dosage forms, i.e. tablets, capsules, beads and powders. Particular attention is paid to the most novel formulations and applications of zein. Moreover, gaps of knowledge as well as possible venues for future investigations on zein are highlighted.

  3. Artificial Neural Networks in Evaluation and Optimization of Modified Release Solid Dosage Forms

    Directory of Open Access Journals (Sweden)

    Zorica Djurić

    2012-10-01

    Full Text Available Implementation of the Quality by Design (QbD approach in pharmaceutical development has compelled researchers in the pharmaceutical industry to employ Design of Experiments (DoE as a statistical tool, in product development. Among all DoE techniques, response surface methodology (RSM is the one most frequently used. Progress of computer science has had an impact on pharmaceutical development as well. Simultaneous with the implementation of statistical methods, machine learning tools took an important place in drug formulation. Twenty years ago, the first papers describing application of artificial neural networks in optimization of modified release products appeared. Since then, a lot of work has been done towards implementation of new techniques, especially Artificial Neural Networks (ANN in modeling of production, drug release and drug stability of modified release solid dosage forms. The aim of this paper is to review artificial neural networks in evaluation and optimization of modified release solid dosage forms.

  4. Design of a gastroretentive mucoadhesive dosage form of furosemide for controlled release

    Directory of Open Access Journals (Sweden)

    Sharad S. Darandale

    2012-10-01

    Full Text Available The aim of the present study was to develop and characterize a gastroretentive dosage form suitable for controlled drug release. It consists of a drug loaded polymeric film made up of a bilayer of immediate (IR and controlled release (CR layers folded into a hard gelatin capsule. Gastroretention results from unfolding and swelling of the film and its bioadhesion to the gastric mucosa. Furosemide, a drug with a narrow absorption window, was selected as the model drug. Inclusion of hydroxypropyl β-cyclodextrin in both layers and Carbopol® 971P NF in the CR layer of the bilayer film resulted in optimum drug release, bioadhesion and mechanical properties. The film with zig-zag folding in the capsule was shown to unfold and swell under acidic conditions and provide IR of drug over 1 h and CR for up to 12 h in acidic medium. X-ray diffraction, differential scanning calorimetry and scanning electron microscopy revealed uniform dispersion of furosemide in the polymeric matrices. The results indicate the dosage form is gastroretentive and can provide controlled release of drugs with narrow therapeutic windows.

  5. Dry elixir formulations of dexibuprofen for controlled release and enhanced oral bioavailability.

    Science.gov (United States)

    Kim, Seo-Ryung; Kim, Jin-Ki; Park, Jeong-Sook; Kim, Chong-Kook

    2011-02-14

    The objective of this study was to achieve an optimal formulation of dexibuprofen dry elixir (DDE) for the improvement of dissolution rate and bioavailability. To control the release rate of dexibuprofen, Eudragit(®) RS was employed on the surface of DDE resulting in coated dexibuprofen dry elixir (CDDE). Physicochemical properties of DDE and CDDE such as particle size, SEM, DSC, and contents of dexibuprofen and ethanol were characterized. Pharmacokinetic parameters of dexibuprofen were evaluated in the rats after oral administration. The DDE and CDDE were spherical particles of 12 and 19 μm, respectively. The dexibuprofen and ethanol contents in the DDE were dependent on the amount of dextrin and maintained for 90 days. The dissolution rate and bioavailability of dexibuprofen loaded in dry elixir were increased compared with those of dexibuprofen powder. Moreover, coating DDE with Eudragit(®) RS retarded the dissolution rate of dexibuprofen from DDE without reducing the bioavailability. Our results suggest that CDDE may be potential oral dosage forms to control the release and to improve the bioavailability of poorly water-soluble dexibuprofen. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. A dual strategy to improve psychotic patients’ compliance using sustained release quetiapine oral disintegrating tablets

    Directory of Open Access Journals (Sweden)

    Refaat Ahmed

    2016-12-01

    Full Text Available Quetiapine (QT is a short acting atypical antipsychotic drug effective in schizophrenia and bipolar disorder. This study aims at designing a novel dosage form of sustained release taste-masked QT orally disintegrating tablets (ODTs based on solid lipid micro-pellets (SLMPs. QT SLMPs were prepared using the hot melt extrusion technique and utilizing three lipid carriers: Compritol, Precirol and white beeswax either alone or in mixtures. They showed sustained QT release and a taste masking effect. The selected QT SLMP was further blended with an aqueous solution containing polyvinylpyrollidone (2.5 %, croscarmellose sodium (2 % and mannitol (50 %; it was then lyophilized into ODT in a mass ratio of 1:2, respectively. ODTs containing QT SLMPs showed: average wetting time (40.92 s, average oral disintegration time (21.49 s, average hardness (16.85 N and also imparted suitable viscosity to suspend pellets during the lyophilization process. In conclusion, lyophilization is a promising technique for the formulation of multiparticulate systems into ODTs.

  7. Materials for Pharmaceutical Dosage Forms: Molecular Pharmaceutics and Controlled Release Drug Delivery Aspects

    Directory of Open Access Journals (Sweden)

    Patrick P. DeLuca

    2010-09-01

    Full Text Available Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development.

  8. In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    Science.gov (United States)

    Reddy, Nallagundla H S; Patnala, Srinivas; Löbenberg, Raimar; Kanfer, Isadore

    2014-10-01

    Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, criteria, and methodologies according to the WHO have been applied. The dissolution performances of immediate-release metronidazole, zidovudine, and amoxicillin products purchased in South African and Indian markets were compared to the relevant comparator pharmaceutical product (CPP)/reference product. The dissolution performances were studied using US Pharmacopeia (USP) apparatus 2 (paddle) set at 75 rpm in each of three dissolution media (pH1.2, 4.5, and 6.8). Concentrations of metronidazole, zidovudine, and amoxicillin in each dissolution media were determined by HPLC. Of the 11 metronidazole products tested, only 8 could be considered as very rapidly dissolving products as defined by the WHO, whereas 2 of those products could be considered as rapidly dissolving products but did not comply with the f 2 acceptance criteria in pH 6.8. All 11 zidovudine products were very rapidly dissolving, whereas in the case of the 14 amoxicillin products tested, none of those products met any of the WHO criteria. This study indicates that not all generic products containing the same biopharmaceutics classification system (BCS) I drug and in similar strength and dosage form are necessarily in vitro equivalent. Hence, there is a need for ongoing market surveillance to determine whether marketed generic products containing BCS I drugs meet the release requirements to confirm their in vitro bioequivalence to the respective reference product.

  9. Dissolution testing of orally disintegrating tablets.

    Science.gov (United States)

    Kraemer, Johannes; Gajendran, Jayachandar; Guillot, Alexis; Schichtel, Julian; Tuereli, Akif

    2012-07-01

    For industrially manufactured pharmaceutical dosage forms, product quality tests and performance tests are required to ascertain the quality of the final product. Current compendial requirements specify a disintegration and/or a dissolution test to check the quality of oral solid dosage forms. These requirements led to a number of compendial monographs for individual products and, at times, the results obtained may not be reflective of the dosage form performance. Although a general product performance test is desirable for orally disintegrating tablets (ODTs), the complexity of the release controlling mechanisms and short time-frame of release make such tests difficult to establish. For conventional oral solid dosage forms (COSDFs), disintegration is often considered to be the prerequisite for subsequent dissolution. Hence, disintegration testing is usually insufficient to judge product performance of COSDFs. Given the very fast disintegration of ODTs, the relationship between disintegration and dissolution is worthy of closer scrutiny. This article reviews the current status of dissolution testing of ODTs to establish the product quality standards. Based on experimental results, it appears that it may be feasible to rely on the dissolution test without a need for disintegration studies for selected ODTs on the market. © 2012 The Authors. JPP © 2012 Royal Pharmaceutical Society.

  10. The knowledge, attitudes and beliefs of patients and their healthcare professionals around oral dosage form modification: A systematic review of the qualitative literature.

    Science.gov (United States)

    Mc Gillicuddy, Aoife; Kelly, Maria; Crean, Abina M; Sahm, Laura J

    The objective of this systematic review was to synthesize the available qualitative evidence on the knowledge, attitudes and beliefs of adult patients, healthcare professionals and carers about oral dosage form modification. A systematic review and synthesis of qualitative studies was undertaken, utilising the thematic synthesis approach. The following databases were searched from inception to September 2015: PubMed, Medline (EBSCO), EMBASE, CINAHL, PsycINFO, Web of Science, ProQuest Databases, Scopus, Turning Research Into Practice (TRIP), Cochrane Central Register of Controlled Trials (CENTRAL) and the Cochrane Database of Systematic Reviews (CDSR). Citation tracking and searching the references lists of included studies was also undertaken. Grey literature was searched using the OpenGrey database, internet searching and personal knowledge. An updated search was undertaken in June 2016. Studies meeting the following criteria were eligible for inclusion; (i) used qualitative data collection and analysis methods; (ii) full-text was available in English; (iii) included adult patients who require oral dosage forms to be modified to meet their needs or; (iv) carers or healthcare professionals of patients who require oral dosage forms to be modified. Two reviewers independently appraised the quality of the included studies using the Critical Appraisal Skills Programme Checklist. A thematic synthesis was conducted and analytical themes were generated. Of 5455 records screened, seven studies were eligible for inclusion; three involved healthcare professionals and the remaining four studies involved patients. Four analytical themes emerged from the thematic synthesis: (i) patient-centred individuality and variability; (ii) communication; (iii) knowledge and uncertainty and; (iv) complexity. The variability of individual patient's requirements, poor communication practices and lack of knowledge about oral dosage form modification, when combined with the complex and multi

  11. Attitude and perception of patients and health care practitioners toward oral sustained release dosage forms in Palestine.

    Science.gov (United States)

    Zaid, Abdel Naser

    2010-10-01

    To evaluate the knowledge of health professionals in Palestine regarding the advantages of sustained release dosage forms (SRDFs) over conventional therapy. Data were gathered from a questionnaire that was handed out to community pharmacists, physicians and patients. Pharmaceutical industry decision makers were enrolled in this study. Data were analyzed using the SPSS. Pharmacists (92.9%) and 89.2% of physicians thought that SRDFs improve patient compliance. 81.5% of pharmacists and 77% of physicians were in agreement regarding the capacity of SRDFs to maintain therapeutic activity during night. In this study, 81.5% of pharmacists and 81% of physicians believed that SRDFs provide further advantage with psychiatric patients who forget to take their medications. Pharmacists (63.1%) and only 63.5% of physicians believed that SRDFs yield a time saving for nurses who use SRDFs in hospital. Only 45.3% of physicians and 43.4% of pharmacists thought that SRDFs result in cost saving due to better disease management. Pharmacists (95.2%) and 95.9% of physicians agreed that SRDFs could be the right choice for faith patient's who must take their medication during the month of Ramadan. Pharmacists (66.7%) and 50.7% of physicians recognize that SRDFs may be unsafe if they are improperly formulated. Bad swallowing was also recognized as inconveniences of SRDFs by 67.9% of pharmacists and 57.3% of physicians. Given the above advantages, 75% of patients showed economical problems regarding the cost of the single course therapy of SRDFs and 100% of interviewed patients were enthusiastic about the advantage of SRDFs during Ramadan. The advantages of SRDFs are not completely understood by Palestinian health professionals. Pharmaceutical industries should pay more attention to the development and advertising of SRDFs due to the valuable advantages of these dosage forms.

  12. Effect of low-molecular-weight beta-cyclodextrin polymer on release of drugs from mucoadhesive buccal film dosage forms.

    Science.gov (United States)

    Arakawa, Yotaro; Kawakami, Shigeru; Yamashita, Fumiyoshi; Hashida, Mitsuru

    2005-09-01

    We investigated the effect of low-molecular-weight beta-cyclodextrin (beta-CyD) polymer on in vitro release of two drugs with different lipophilicities (i.e., lidocaine and ketoprofen) from mucoadhesive buccal film dosage forms. When beta-CyD polymer was added to hydroxypropylcellulose (HPC) or polyvinylalcohol (PVA) film dosage forms, the release of lidocaine into artificial saliva (pH 5.7) was reduced by 40% of the control. In contrast, the release of ketoprofen from the polymer film was enhanced by addition of beta-CyD polymer to the vehicle. When lidocaine and ketoprofen was incubated with beta-CyD polymer in the artificial saliva, concentration of free lidocaine molecules decreased in a beta-CyD polymer concentration-dependent manner. The association constant with beta-CyD polymer was 6.9+/-0.6 and 520+/-90 M(-1) for lidocaine and ketoprofen, respectively. Retarded release of the hydrophilic lidocaine by beta-CyD polymer might be due to the decrease in thermodynamic activity by inclusion complex formation, whereas enhanced release of the lipophilic ketoprofen by the beta-CyD polymer might be due to prevention of recrystallization occurring after contacting the film with aqueous solution. Thus, effects of low-molecular-weight beta-CyD polymer to the drug release rate from film dosage forms would vary according to the strength of interaction with and the solubility of active ingredient.

  13. Evidence for oral agmatine sulfate safety--a 95-day high dosage pilot study with rats.

    Science.gov (United States)

    Gilad, Gad M; Gilad, Varda H

    2013-12-01

    Agmatine, decarboxylated arginine, exerts beneficial effects in various experimental disease models. Clinical trials indicate the safety and effectiveness of short-term (up to 21 days) high dose regimens of oral agmatine sulfate, but longer term studies are lacking. This pilot study undertook to assess the safety of a longer term high dosage oral agmatine sulfate in laboratory rats. Adult Wistar rats consumed 5.3 g/l agmatine sulfate in their drinking water for 95 days, a regimen estimated to result in a daily dosage of absorbed agmatine of about 100mg/kg. Animals' body weight, water consumption and blood pressure were periodically measured, and general cage behavior, fur appearance, urination and feces appearance monitored. These parameters were also determined at 20 days after treatment cessation (day 115). On days 95 and 115, animals were euthanized for gross necropsy assessment. Agmatine-treated rats showed slight, but significant reductions in body weight and blood pressure, and reduced water consumption during treatment, which recovered completely within 20 days after treatment cessation. Otherwise, no abnormal behaviors or organ pathologies were observed. These findings are first to suggest apparent safety of sub-chronic high dosage dietary agmatine sulfate in laboratory rats, thus lending further support to the therapeutic applications of agmatine. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. The effect of miscellaneous oral dosage forms on the environmental pollution of sulfonamides in pig holdings.

    Science.gov (United States)

    Stahl, Jessica; Zessel, Katrin; Schulz, Jochen; Finke, Jan Henrik; Müller-Goymann, Christel Charlotte; Kietzmann, Manfred

    2016-04-01

    Due to antibiotic treatment of humans and animals, the prevalence of bacterial resistances increases worldwide. Especially in livestock farming, large quantities of faeces contaminated with antibiotics pose a risk of the carryover of the active ingredient to the environment. Accordingly, the aim of the present study was the evaluation of the benefit of different oral dosage forms (powder, pellets, granula) in pigs concerning the environmental pollution of sulfadiazine. Two subtherapeutic dosages were evaluated in powder mixtures to gain information about their potential to pollute the pig barn. Furthermore, a new group of pigs was kept in the stable after powder feeding of another pig group to determine the possible absorption of environmentally distributed antibiotics. Pigs were orally treated with three dosage forms. Simultaneously, sedimentation and airborne dust were collected and plasma and urine levels were determined. All formulations result in comparable plasma and urine levels, but massive differences in environmental pollution (powder > pellets, granula). Pigs housing in a contaminated barn exhibit traces of sulfadiazine in plasma and urine. Using pharmaceutical formulations like pellets or granula, the environmental pollution of sulfonamides can significantly be diminished due to massive dust reduction during feeding.

  15. Determination of the mechanical properties of solid and cellular polymeric dosage forms by diametral compression.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2016-07-25

    At present, the immediate-release solid dosage forms, such as the oral tablets and capsules, are granular solids. They release drug rapidly and have adequate mechanical properties, but their manufacture is fraught with difficulties inherent in processing particulate matter. Such difficulties, however, could be overcome by liquid-based processing. Therefore, we have recently introduced polymeric cellular (i.e., highly porous) dosage forms prepared from a melt process. Experiments have shown that upon immersion in a dissolution medium, the cellular dosage forms with polyethylene glycol (PEG) as excipient and with predominantly open-cell topology disintegrate by exfoliation, thus enabling rapid drug release. If the volume fraction of voids of the open-cell structures is too large, however, their mechanical strength is adversely affected. At present, the common method for determining the tensile strength of brittle, solid dosage forms (such as select granular forms) is the diametral compression test. In this study, the theory of diametral compression is first refined to demonstrate that the relevant mechanical properties of ductile and cellular solids (i.e., the elastic modulus and the yield strength) can also be extracted from this test. Diametral compression experiments are then conducted on PEG-based solid and cellular dosage forms. It is found that the elastic modulus and yield strength of the open-cell structures are about an order of magnitude smaller than those of the non-porous solids, but still are substantially greater than the stiffness and strength requirements for handling the dosage forms manually. This work thus demonstrates that melt-processed polymeric cellular dosage forms that release drug rapidly can be designed and manufactured to have adequate mechanical properties. Copyright © 2016. Published by Elsevier B.V.

  16. Simulated food effects on drug release from ethylcellulose: PVA-PEG graft copolymer-coated pellets.

    Science.gov (United States)

    Muschert, Susanne; Siepmann, Florence; Leclercq, Bruno; Carlin, Brian; Siepmann, Juergen

    2010-02-01

    Food effects might substantially alter drug release from oral controlled release dosage forms in vivo. The robustness of a novel type of controlled release film coating was investigated using various types of release media and two types of release apparatii. Importantly, none of the investigated conditions had a noteworthy impact on the release of freely water-soluble diltiazem HCl or slightly water-soluble theophylline from pellets coated with ethylcellulose containing small amounts of PVA-PEG graft copolymer. In particular, the presence of significant amounts of fats, carbohydrates, surfactants, bile salts, and calcium ions in the release medium did not alter drug release. Furthermore, changes in the pH and differences in the mechanical stress the dosage forms were exposed to did not affect drug release from the pellets. The investigated film coatings allowing for oral controlled drug delivery are highly robust in vitro and likely to be poorly sensitive to classical food effects in vivo.

  17. Drug delivery systems with modified release for systemic and biophase bioavailability.

    Science.gov (United States)

    Leucuta, Sorin E

    2012-11-01

    This review describes the most important new generations of pharmaceutical systems: medicines with extended release, controlled release pharmaceutical systems, pharmaceutical systems for the targeted delivery of drug substances. The latest advances and approaches for delivering small molecular weight drugs and other biologically active agents such as proteins and nucleic acids require novel delivery technologies, the success of a drug being many times dependent on the delivery method. All these dosage forms are qualitatively superior to medicines with immediate release, in that they ensure optimal drug concentrations depending on specific demands of different disease particularities of the body. Drug delivery of these pharmaceutical formulations has the benefit of improving product efficacy and safety, as well as patient convenience and compliance. This paper describes the biopharmaceutical, pharmacokinetic, pharmacologic and technological principles in the design of drug delivery systems with modified release as well as the formulation criteria of prolonged and controlled release drug delivery systems. The paper presents pharmaceutical prolonged and controlled release dosage forms intended for different routes of administration: oral, ocular, transdermal, parenteral, pulmonary, mucoadhesive, but also orally fast dissolving tablets, gastroretentive drug delivery systems, colon-specific drug delivery systems, pulsatile drug delivery systems and carrier or ligand mediated transport for site specific or receptor drug targeting. Specific technologies are given on the dosage forms with modified release as well as examples of marketed products, and current research in these areas.

  18. Development of theophylline sustained release dosage form based on Kollidon SR.

    Science.gov (United States)

    Reza, Md Selim; Quadir, Mohiuddin Abdul; Haider, Syed Shabbir

    2002-01-01

    Sustained release theophylline matrix tablets constituting Kollidon SR (Polyvinyl acetate and povidone based matrix retarding polymer) were developed in this study in an attempt to design a dosage form that manifests desirable release profile and thorough adherence to official monographs. Four matrix tablet formulations were prepared by dry blending and direct compression of Kollidon SR and HPMC-15cps (hydroxypropylmethylcellulose) in varying proportion with fixed percentage of theophylline. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release with an initial burst effect. Incorporation of HPMC-15cps in the matrix tablet prolonged the release of drug with subsequent minimization of burst effect as confirmed by mean dissolution time, T50 and Higuchi release rate data. Among the batches containing HPMC-15 cps, a direct relationship was obtained between release rate and the percentage of HPMC used. A suitable controlled release profile was obtained with the matrix tablets containing 20% Kollidon SR and 30% HPMC-15cps. The formulation showed close resemblance to commercial products and compliance with USP specification. The results were explored and explained by the difference of physico-chemical property and hydration characteristics of the polymers. In addition to this result, the exponential model was applied to characterize the drug release behaviour from polymeric systems. It was found that, Fickian release is predominant in tablets containing Kollidon SR alone and non-Fickian mechanism plays an important role in the release of drug from HPMC containing tablets with a trend towards zero-order or case II release. In vitro release profile of two commercial brands were also undertaken for comparison and modulation of the experimental batches.

  19. Development of Sustained-Release Microbeads of Nifedipine and In ...

    African Journals Online (AJOL)

    Methods: Nifedipine microbeads were prepared using sodium alginate and pectin in different ratios by ionic-gelation method. ... Oral sustained release dosage forms provide ... Stability in .... 37oC) in a USP XXII apparatus (Pharma Test,.

  20. Mathematical modeling of drug release from lipid dosage forms.

    Science.gov (United States)

    Siepmann, J; Siepmann, F

    2011-10-10

    Lipid dosage forms provide an interesting potential for controlled drug delivery. In contrast to frequently used poly(ester) based devices for parenteral administration, they do not lead to acidification upon degradation and potential drug inactivation, especially in the case of protein drugs and other acid-labile active agents. The aim of this article is to give an overview on the current state of the art of mathematical modeling of drug release from this type of advanced drug delivery systems. Empirical and semi-empirical models are described as well as mechanistic theories, considering diffusional mass transport, potentially limited drug solubility and the leaching of other, water-soluble excipients into the surrounding bulk fluid. Various practical examples are given, including lipid microparticles, beads and implants, which can successfully be used to control the release of an incorporated drug during periods ranging from a few hours up to several years. The great benefit of mechanistic mathematical theories is the possibility to quantitatively predict the effects of different formulation parameters and device dimensions on the resulting drug release kinetics. Thus, in silico simulations can significantly speed up product optimization. This is particularly useful if long release periods (e.g., several months) are targeted, since experimental trial-and-error studies are highly time-consuming in these cases. In the future it would be highly desirable to combine mechanistic theories with the quantitative description of the drug fate in vivo, ideally including the pharmacodynamic efficacy of the treatments. Copyright © 2011 Elsevier B.V. All rights reserved.

  1. A review on oral liquid as an emerging technology in controlled drug delivery system.

    Science.gov (United States)

    Torne, Sangmesh Raosaheb; Sheela, Angappan; Sarada, N C

    2017-12-03

    The oral liquid drug delivery system (OLDDS) remains as the primary choice of dosage form, though challenging, for the pharmaceutical scientists. In the last two decades, Oral Liquid Controlled Release (OLCR) formulation has gained a lot of attention because of its advantages over the conventional dosage forms. The world of nanotechnology has paved multiple ways to administer the drug through oral cavity in liquid dosage form with an additional advantage of control over the release. In the current study, the various approaches towards the same have been discussed comprehensively to understand the different mechanisms of OLCR. This review also emphasizes on the existing techniques and the developments that have been made to improve on its efficacy including various formulation related factors. It also provides valuable insights into the role of polymers in the development of OLCR formulation that can be used in the management of Gastroesophageal reflux disease (GERD). Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  2. 76 FR 25696 - Guidance for Industry on Dosage Delivery Devices for Orally Ingested OTC Liquid Drug Products...

    Science.gov (United States)

    2011-05-05

    ... are manufacturing, marketing, or distributing orally ingested over-the-counter (OTC) liquid drug... overdoses that can result from the use of dosage delivery devices with markings that are inconsistent or... because of ongoing concerns about potentially serious accidental drug overdoses that can result from the...

  3. Toward Higher QA: From Parametric Release of Sterile Parenteral Products to PAT for Other Pharmaceutical Dosage Forms.

    Science.gov (United States)

    Hock, Sia Chong; Constance, Neo Xue Rui; Wah, Chan Lai

    2012-01-01

    Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach for determining the pharmaceutical quality of the finished dosage form. In the case of terminally sterilized parenteral products, the limitations of conventional batch testing have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms, beyond terminally sterilized parenteral products. For parametric release to be possible, manufacturers must be capable of designing quality into the product, monitoring the manufacturing processes, and controlling the quality of intermediates and finished products in real-time. Process analytical technology (PAT) has been thought to be capable of contributing to these prerequisites. It is believed that the appropriate use of PAT tools can eventually lead to the possibility of real-time release of other pharmaceutical dosage forms, by-passing the need for end-product batch testing. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. Last but not least, current regulations governing the use of PAT and the manufacturing challenges associated with PAT implementation are also discussed. Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most

  4. Microstructural effects in drug release by solid and cellular polymeric dosage forms: A comparative study.

    Science.gov (United States)

    Blaesi, Aron H; Saka, Nannaji

    2017-11-01

    In recent studies, we have introduced melt-processed polymeric cellular dosage forms to achieve both immediate drug release and predictable manufacture. Dosage forms ranging from minimally-porous solids to highly porous, open-cell and thin-walled structures were prepared, and the drug release characteristics investigated as the volume fraction of cells and the excipient molecular weight were varied. In the present study, both minimally-porous solid and cellular dosage forms consisting of various weight fractions of Acetaminophen drug and polyethylene glycol (PEG) excipient are prepared and analyzed. Microstructures of the solid forms and the cell walls range from single-phase solid solutions of the excipient and a small amount of drug molecules to two-phase composites of the excipient and tightly packed drug particles. Results of dissolution experiments show that the minimally-porous solid forms disintegrate and release drug by slow surface erosion. The erosion rate decreases as the drug weight fraction is increased. By contrast, the open-cell structures disintegrate rapidly by viscous exfoliation, and the disintegration time is independent of drug weight fraction. Drug release models suggest that the solid forms erode by convective mass transfer of the faster-eroding excipient if the drug volume fraction is small. At larger drug volume fractions, however, the slower-eroding drug particles hinder access of the free-flowing fluid to the excipient, thus slowing down erosion of the composite. Conversely, the disintegration rate of the cellular forms is limited by diffusion of the dissolution fluid into the excipient phase of the thin cell walls. Because the wall thickness is of the order of the drug particle size, and the particles are enveloped by the excipient during melt-processing, the drug particles cannot hinder diffusion through the excipient across the walls. Thus the disintegration time of the cellular forms is mostly unaffected by the volume fraction of drug

  5. Multi-unit dosage formulations of theophylline for controlled release applications.

    Science.gov (United States)

    Uhumwangho, Michael U; Okor, Roland S

    2007-01-01

    The study was carried out to investigate the drug release profiles of multi-unit dosage formulations of theophylline consisting of both the fast and slow release components in a unit dose. The fast release component consisted of conventional granules of theophylline formed by mixing the drug powder with starch mucilage (20% w/v) while the slow release component consisted of wax granulations of theophylline formed by triturating the drug powder with a melted Carnauba wax (drug:wax ratio, 4:1). The granules were either filled into capsules or tabletted. In the study design, the drug release characteristics of the individual fast or slow release particles were first determined separately and then mixed in various proportions for the purpose of optimizing the drug release profiles. The evaluating parameters were the prompt release in the first 1 h (mp), the maximum release (m infinity) and the time to attain it (t infinity). Total drug content in each capsule or tablet was 300 mg and two of such were used in dissolution studies. The release kinetics and hence the release mechanism was confirmed by measuring the linear regression coefficient (R2 values) of the release data. The release kinetics was generally most consistent with the Higuchi square root of time relationship (R2 = 0.95). indicating a diffusion-controlled mechanism. The mp (mg) and t infinity (h) values for capsules and tablets of the conventional granules were (420 mg, 3 h) and (348 mg, 5 h), respectively, while for the capsules and tablets of the wax granulations mp and t infinity values were (228 mg, 9 h) and (156 mg, 12 h), respectively, indicating that a combination of wax granulation and tableting markedly retarded drug release. In the multi-unit dose formulations where the conventional and wax granulations were mixed in the ratios 2:1, 1:1 and 1:2 (conventional: matrix), the m infinity and t infinity values for the capsules were (378 mg, 6 h), (326 mg, 6 h) and (272 mg, 7 h), reSpectively. The

  6. Study of hydrogels based on polyacrilamide as new controlled release dosage forms produced by frontal polymerization

    OpenAIRE

    Sechi, Rossana; Gavini, Elisabetta; Mariani, Alberto; Bidali, Simone; Bonferoni, Maria Cristina; Sanna, Vanna Annunziata; Rassu, Giovanna; Pirisino, Gerolamo Antonio; Giunchedi, Paolo

    2006-01-01

    The work purpose was the evaluation of the potential application of the Frontal Polymerization (FP) technique as a new method for the preparation of controlled release dosage forms based on polyacrilamide, in which the drug loading and the polymer preparation occur at the same time.

  7. Consumer Preferences and Perceptions towards the use Colored Oral Solid Dosage Forms in Baghdad

    Directory of Open Access Journals (Sweden)

    Inas Rifaat Ibrahim,*, Mohamed Izham M.I & Mahmoud Al-Haddad

    2010-10-01

    Full Text Available Objective: The main aims of this study were to determine consumers’ preferences and perceptions in Baghdad towards the color of Oral Solid Dosage Form.Materials and Methods: A cross sectional study was conducted using a self–administered questionnaire. A convenient sampling method was adopted to approach the consumers visiting the community pharmacies in Baghdad.The data collected was analyzed using SPSS version 16 ®. Anon-parametric statistics i.e [Chi-square, Mann-Whitney and Kruskal-Wallis tests] were used to evaluate the association of demographic variables with respondents perceptions toward physical characteristics of Oral Solid Dosage Form.Results: Colored OSDF was preferred by 76.4% of consumers.Significant differences in this preference were found among genders (P=0.029; age (P<0.001; educational level (P=0.001;and monthly income level (0.007. Further, consumers perceived that color of OSDF is related with the therapeutic activity of medicine. Significant differences in this perception were found to be influenced by gender (P=0.016; age group(P<0.001; and educational level (P<0.001.Conclusion: In a conclusion, color was the most preferred characteristic of OSDF by Baghdadi consumers with the perceptions that color is related to therapeutic activity of medicines. Gender, age, educational level, and monthly income are important factors that are associated with the preferences and perceptions toward colored OSDF.

  8. Oral controlled release drug delivery system and Characterization of oral tablets; A review

    OpenAIRE

    Muhammad Zaman; Junaid Qureshi; Hira Ejaz; Rai Muhammad Sarfraz; Hafeez ullah Khan; Fazal Rehman Sajid; Muhammad Shafiq ur Rehman

    2016-01-01

    Oral route of drug administration is considered as the safest and easiest route of drug administration. Control release drug delivery system is the emerging trend in the pharmaceuticals and the oral route is most suitable for such kind of drug delivery system. Oral route is more convenient for It all age group including both pediatric and geriatrics. There are various systems which are adopted to deliver drug in a controlled manner to different target sites through oral route. It includes dif...

  9. Rationale and design of the oral HEMe iron polypeptide Against Treatment with Oral Controlled Release Iron Tablets trial for the correction of anaemia in peritoneal dialysis patients (HEMATOCRIT trial

    Directory of Open Access Journals (Sweden)

    Isbel Nicole M

    2009-07-01

    Full Text Available Abstract Background The main hypothesis of this study is that oral heme iron polypeptide (HIP; Proferrin® ES administration will more effectively augment iron stores in erythropoietic stimulatory agent (ESA-treated peritoneal dialysis (PD patients than conventional oral iron supplementation (Ferrogradumet®. Methods Inclusion criteria are peritoneal dialysis patients treated with darbepoietin alpha (DPO; Aranesp®, Amgen for ≥ 1 month. Patients will be randomized 1:1 to receive either slow-release ferrous sulphate (1 tablet twice daily; control or HIP (1 tablet twice daily for a period of 6 months. The study will follow an open-label design but outcome assessors will be blinded to study treatment. During the 6-month study period, haemoglobin levels will be measured monthly and iron studies (including transferring saturation [TSAT] measurements will be performed bi-monthly. The primary outcome measure will be the difference in TSAT levels between the 2 groups at the end of the 6 month study period, adjusted for baseline values using analysis of covariance (ANCOVA. Secondary outcome measures will include serum ferritin concentration, haemoglobin level, DPO dosage, Key's index (DPO dosage divided by haemoglobin concentration, and occurrence of adverse events (especially gastrointestinal adverse events. Discussion This investigator-initiated multicentre study has been designed to provide evidence to help nephrologists and their peritoneal dialysis patients determine whether HIP administration more effectively augments iron stores in ESP-treated PD patients than conventional oral iron supplementation. Trial Registration Australia New Zealand Clinical Trials Registry number ACTRN12609000432213.

  10. An introduction to fast dissolving oral thin film drug delivery systems: a review.

    Science.gov (United States)

    Kathpalia, Harsha; Gupte, Aasavari

    2013-12-01

    Many pharmaceutical companies are switching their products from tablets to fast dissolving oral thin films (OTFs). Films have all the advantages of tablets (precise dosage, easy administration) and those of liquid dosage forms (easy swallowing, rapid bioavailability). Statistics have shown that four out of five patients prefer orally disintegrating dosage forms over conventional solid oral dosages forms. Pediatric, geriatric, bedridden, emetic patients and those with Central Nervous System disorders, have difficulty in swallowing or chewing solid dosage forms. Many of these patients are non-compliant in administering solid dosage forms due to fear of choking. OTFs when placed on the tip or the floor of the tongue are instantly wet by saliva. As a result, OTFs rapidly hydrate and then disintegrate and/or dissolve to release the medication for local and/or systemic absorption. This technology provides a good platform for patent non- infringing product development and for increasing the patent life-cycle of the existing products. The application of fast dissolving oral thin films is not only limited to buccal fast dissolving system, but also expands to other applications like gastroretentive, sublingual delivery systems. This review highlights the composition including the details of various types of polymers both natural and synthetic, the different types of manufacturing techniques, packaging materials and evaluation tests for the OTFs.

  11. An integrated system for dissolution studies and magnetic resonance imaging of controlled release, polymer-based dosage forms-a tool for quantitative assessment of hydrogel formation processes.

    Science.gov (United States)

    Kulinowski, Piotr; Dorozyński, Przemysław; Jachowicz, Renata; Weglarz, Władysław P

    2008-11-04

    Controlled release (CR) dosage forms are often based on polymeric matrices, e.g., sustained-release tablets and capsules. It is crucial to visualise and quantify processes of the hydrogel formation during the standard dissolution study. A method for imaging of CR, polymer-based dosage forms during dissolution study in vitro is presented. Imaging was performed in a non-invasive way by means of the magnetic resonance imaging (MRI). This study was designed to simulate in vivo conditions regarding temperature, volume, state and composition of dissolution media. Two formulations of hydrodynamically balanced systems (HBS) were chosen as model CR dosage forms. HBS release active substance in stomach while floating on the surface of the gastric content. Time evolutions of the diffusion region, hydrogel formation region and "dry core" region were obtained during a dissolution study of L-dopa as a model drug in two simulated gastric fluids (i.e. in fed and fasted state). This method seems to be a very promising tool for examining properties of new formulations of CR, polymer-based dosage forms or for comparison of generic and originator dosage forms before carrying out bioequivalence studies.

  12. Layered lipid microcapsules for mesalazine delayed-release in children.

    Science.gov (United States)

    Balducci, Anna Giulia; Colombo, Gaia; Corace, Giuseppe; Cavallari, Cristina; Rodriguez, Lorenzo; Buttini, Francesca; Colombo, Paolo; Rossi, Alessandra

    2011-12-15

    The goal was to make available a delayed-release dosage form of mesalazine to be dispersed in water to facilitate swallowing in adults and children. Mesalazine microparticles containing carnauba wax were prepared by spray-congealing technique. A second step of spray-congealing of carnauba microparticles dispersed in liquefied stearic acid gave rise to mesalazine lipid microcapsules in which several carnauba microparticles remained embedded as cores in a reservoir structure. In order to favor their water dispersion, the lipid microcapsules were dry coated by tumbling them with different ratios of mannitol/lecithin microparticles prepared by spray-drying. Release rate measurements showed a delayed-release behavior, in particular a pH-dependence with less than 10% of drug released in acidic medium and complete release in phosphate buffer pH 7.4 in 4-5h. The layering with hydrophilic excipient microparticles allowed manufacturing of a pH-dependent dosage form suitable for extemporaneous oral use in adults and children. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. A Novel Disintegration Tester for Solid Dosage Forms Enabling Adjustable Hydrodynamics.

    Science.gov (United States)

    Kindgen, Sarah; Rach, Regine; Nawroth, Thomas; Abrahamsson, Bertil; Langguth, Peter

    2016-08-01

    A modified in vitro disintegration test device was designed that enables the investigation of the influence of hydrodynamic conditions on disintegration of solid oral dosage forms. The device represents an improved derivative of the compendial PhEur/USP disintegration test device. By the application of a computerized numerical control, a variety of physiologically relevant moving velocities and profiles can be applied. With the help of computational fluid dynamics, the hydrodynamic and mechanical forces present in the probe chamber were characterized for a variety of device moving speeds. Furthermore, a proof of concept study aimed at the investigation of the influence of hydrodynamic conditions on disintegration times of immediate release tablets. The experiments demonstrated the relevance of hydrodynamics for tablet disintegration, especially in media simulating the fasted state. Disintegration times increased with decreasing moving velocity. A correlation between experimentally determined disintegration times and computational fluid dynamics predicted shear stress on tablet surface was established. In conclusion, the modified disintegration test device is a valuable tool for biorelevant in vitro disintegration testing of solid oral dosage forms. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  14. Micropellets coated with Kollicoat® Smartseal 30D for taste masking in liquid oral dosage forms.

    Science.gov (United States)

    Dashevskiy, Andriy; Mohylyuk, Valentyn; Ahmed, Abid Riaz; Kolter, Karl; Guth, Felicitas; Bodmeier, Roland

    2017-09-01

    The objective of this study was to develop delivery systems for taste masking based on multiparticulates coated with Kollicoat ® Smartseal 30D formulated as liquid oral suspensions. Coating of particles containing bitter drugs with Kollicoat ® Smartseal reduced drug leaching into aqueous medium, especially when increasing pH, therefore can be used for the formulation of liquid dosage forms. Application of an intermediate layer of ion exchange resins between drug layer and coating can further decrease drug leaching into aqueous vehicle that is beneficial in terms of taste masking. Using optimized compositions of liquid vehicles such as addition of sugar alcohols and ion exchange resin, reconstitutable or ready-to-use liquid dosage forms with micropellets can be developed with bitter taste protection after redispersion lasting longer than 3 weeks, which exceeds the usual period of application.

  15. Surface modified zeolite-based granulates for the sustained release of diclofenac sodium.

    Science.gov (United States)

    Serri, Carla; de Gennaro, Bruno; Quagliariello, Vincenzo; Iaffaioli, Rosario Vincenzo; De Rosa, Giuseppe; Catalanotti, Lilia; Biondi, Marco; Mayol, Laura

    2017-03-01

    In this study, a granulate for the oral controlled delivery of diclofenac sodium (DS), an anionic sparingly soluble nonsteroidal anti-inflammatory drug, has been realized by wet granulation, using a surface modified natural zeolite (SMNZ) as an excipient. The surface modification of the zeolite has been achieved by means of a cationic surfactant, so as to allow the loading of DS through ionic interaction and bestow a control over the drug release mechanism. The granules possessed a satisfactory dosage uniformity, a flowability suitable for an oral dosage form manufacturing, along with a sustained drug release up to 9h, driven by both ion exchange and transport kinetics. Furthermore, the obtained granulate did not elicit a significant cytotoxicity and could also induce a prolonged anti-inflammatory effect on RAW264.7 cells. Taking also into account that natural zeolites are generally abundant and economic, SMNZ can be considered as an attracting alternative excipient for the production of granules with sustained release features. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Development and evaluation of new multiple-unit levodopa sustained-release floating dosage forms.

    Science.gov (United States)

    Goole, J; Vanderbist, F; Amighi, K

    2007-04-04

    This work relates to the development and the in vitro evaluation of sustained-release minitablets (MT), prepared by melt granulation and subsequent compression, which are designed to float over an extended period of time. Levodopa was used as a model drug. The importance of the composition and manufacturing parameters of the MT on their floating and dissolution properties was then examined. The investigation showed that MT composition and MT diameter had the greatest influence on drug release, which was sustained for more than 8h. By using the same formulation, the best floating properties were obtained with 3mm MT prepared at low compression forces ranging between 50 and 100N. Their resultant-weight (RW) values were always higher than those obtained with a marketed HBS dosage form within 13h. When they were filled into gelatin capsules, no sticking was observed. By evaluating the dissolution profiles of levodopa at different pH values, it was found that dissolution profiles depend more on the prolonged-release ability of Methocel K15M than on the pH-dependent solubility of levodopa. Finally, the robustness of the floating MT was assessed by testing the drug release variability in function of the stirring conditions during dissolution tests.

  17. Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms

    Directory of Open Access Journals (Sweden)

    Evert Fuenmayor

    2018-04-01

    Full Text Available Material choice is a fundamental consideration when it comes to designing a solid dosage form. The matrix material will ultimately determine the rate of drug release since the physical properties (solubility, viscosity, and more of the material control both fluid ingress and disintegration of the dosage form. The bulk properties (powder flow, concentration, and more of the material should also be considered since these properties will influence the ability of the material to be successfully manufactured. Furthermore, there is a limited number of approved materials for the production of solid dosage forms. The present study details the complications that can arise when adopting pharmaceutical grade polymers for fused-filament fabrication in the production of oral tablets. The paper also presents ways to overcome each issue. Fused-filament fabrication is a hot-melt extrusion-based 3D printing process. The paper describes the problems encountered in fused-filament fabrication with Kollidon® VA64, which is a material that has previously been utilized in direct compression and hot-melt extrusion processes. Formulation and melt-blending strategies were employed to increase the printability of the material. The paper defines for the first time the essential parameter profile required for successful 3D printing and lists several pre-screening tools that should be employed to guide future material formulation for the fused-filament fabrication of solid dosage forms.

  18. Alternative Manufacturing Concepts for Solid Oral Dosage Forms From Drug Nanosuspensions Using Fluid Dispensing and Forced Drying Technology.

    Science.gov (United States)

    Bonhoeffer, Bastian; Kwade, Arno; Juhnke, Michael

    2018-03-01

    Flexible manufacturing technologies for solid oral dosage forms with a continuous adjustability of the manufactured dose strength are of interest for applications in personalized medicine. This study explored the feasibility of using microvalve technology for the manufacturing of different solid oral dosage form concepts. Hard gelatin capsules filled with excipients, placebo tablets, and polymer films, placed in hard gelatin capsules after drying, were considered as substrates. For each concept, a basic understanding of relevant formulation parameters and their impact on dissolution behavior has been established. Suitable matrix formers, present either on the substrate or directly in the drug nanosuspension, proved to be essential to prevent nanoparticle agglomeration of the drug nanoparticles and to ensure a fast dissolution behavior. Furthermore, convection and radiation drying methods were investigated for the fast drying of drug nanosuspensions dispensed onto polymer films, which were then placed in hard gelatin capsules. Changes in morphology and in drug and matrix former distribution were observed for increasing drying intensity. However, even fast drying times below 1 min could be realized, while maintaining the nanoparticulate drug structure and a good dissolution behavior. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  19. High-amylose sodium carboxymethyl starch matrices: development and characterization of tramadol hydrochloride sustained-release tablets for oral administration.

    Science.gov (United States)

    Nabais, Teresa; Leclair, Grégoire

    2014-01-01

    Substituted amylose (SA) polymers were produced from high-amylose corn starch by etherification of its hydroxyl groups with chloroacetate. Amorphous high-amylose sodium carboxymethyl starch (HASCA), the resulting SA polymer, was spray-dried to obtain an excipient (SD HASCA) with optimal binding and sustained-release (SR) properties. Tablets containing different percentages of SD HASCA and tramadol hydrochloride were produced by direct compression and evaluated for dissolution. Once-daily and twice-daily SD HASCA tablets containing two common dosages of tramadol hydrochloride (100 mg and 200 mg), a freely water-soluble drug, were successfully developed. These SR formulations presented high crushing forces, which facilitate further tablet processing and handling. When exposed to both a pH gradient simulating the pH variations through the gastrointestinal tract and a 40% ethanol medium, a very rigid gel formed progressively at the surface of the tablets providing controlled drug-release properties. These properties indicated that SD HASCA was a promising and robust excipient for oral, sustained drug-release, which may possibly minimize the likelihood of dose dumping and consequent adverse effects, even in the case of coadministration with alcohol.

  20. [Pharmaceutical advice concerning different pharmaceutical dosage forms].

    Science.gov (United States)

    Szakonyi, Gergely; Zelkó, Romána

    2010-01-01

    The present paper summarizes the commonly applied types of drug uptake and the pharmacists' advice concerning a certain dosage form. The manuscript also deals with the modified release dosage forms and their abbreviations in the name of the marketing authorized products.

  1. Phenazopyridine-phthalimide nano-cocrystal: Release rate and oral bioavailability enhancement.

    Science.gov (United States)

    Huang, Yu; Li, Jin-Mei; Lai, Zhi-Hui; Wu, Jun; Lu, Tong-Bu; Chen, Jia-Mei

    2017-11-15

    Both cocrystal and nanocrystal technologies have been widely used in the pharmaceutical development for poorly soluble drugs. However, the synergistic effects due to the integration of these two technologies have not been well investigated. The aim of this study is to develop a nano-sized cocrystal of phenazopyridine (PAP) with phthalimide (PI) to enhance the release rate and oral bioavailability of PAP. A PAP-PI nano-cocrystal with particle diameter of 21.4±0.1nm was successfully prepared via a sonochemical approach and characterized by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and dynamic light scattering (DLS) analysis. An in vitro release study revealed a significant release rate enhancement for PAP-PI nano-cocrystal as compared to PAP-PI cocrystal and PAP hydrochloride salt. Further, a comparative oral bioavailability study in rats indicated significant improvement in C max and oral bioavailability (AUC 0-∞ ) by 1.39- and 2.44-fold, respectively. This study demonstrated that this novel nano-cocrystal technology can be a new promising option to improve release rate and absorption of poorly soluble compounds in the pharmaceutical industry. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Aroma release in the oral cavity after wine intake is influenced by wine matrix composition.

    Science.gov (United States)

    Esteban-Fernández, Adelaida; Muñoz-González, Carolina; Jiménez-Girón, Ana; Pérez-Jiménez, María; Pozo-Bayón, María Ángeles

    2018-03-15

    The aim of this study has been to investigate if wine matrix composition might influence the interaction between odorants and oral mucosa in the oral cavity during a "wine intake-like" situation. Aroma released after exposing the oral cavity of three individuals to different wines (n=12) previously spiked with six target aromas was followed by an -in vivo intra-oral SPME approach. Results showed a significant effect of wine matrix composition on the intra-oral aroma release of certain odorants. Among the wine matrix parameters, phenolic compounds showed the largest impact. This effect was dependent on their chemical structure. Some phenolic acids (e.g. hippuric, caffeic) were associated to an increase in the intra-oral release of certain odorants (e.g. linalool, β-ionone), while flavonoids showed the opposite effect, decreasing the intra-oral release of aliphatic esters (ethyl hexanoate). This work shows for the first time, the impact of wine composition on oral-mucosa interactions under physiological conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Drop-on-Demand System for Manufacturing of Melt-based Solid Oral Dosage: Effect of Critical Process Parameters on Product Quality.

    Science.gov (United States)

    Içten, Elçin; Giridhar, Arun; Nagy, Zoltan K; Reklaitis, Gintaras V

    2016-04-01

    The features of a drop-on-demand-based system developed for the manufacture of melt-based pharmaceuticals have been previously reported. In this paper, a supervisory control system, which is designed to ensure reproducible production of high quality of melt-based solid oral dosages, is presented. This control system enables the production of individual dosage forms with the desired critical quality attributes: amount of active ingredient and drug morphology by monitoring and controlling critical process parameters, such as drop size and product and process temperatures. The effects of these process parameters on the final product quality are investigated, and the properties of the produced dosage forms characterized using various techniques, such as Raman spectroscopy, optical microscopy, and dissolution testing. A crystallization temperature control strategy, including controlled temperature cycles, is presented to tailor the crystallization behavior of drug deposits and to achieve consistent drug morphology. This control strategy can be used to achieve the desired bioavailability of the drug by mitigating variations in the dissolution profiles. The supervisor control strategy enables the application of the drop-on-demand system to the production of individualized dosage required for personalized drug regimens.

  4. In vitro models for the prediction of in vivo performance of oral dosage forms

    DEFF Research Database (Denmark)

    Kostewicz, Edmund S; Abrahamsson, Bertil; Brewster, Marcus

    2014-01-01

    Accurate prediction of the in vivo biopharmaceutical performance of oral drug formulations is critical to efficient drug development. Traditionally, in vitro evaluation of oral drug formulations has focused on disintegration and dissolution testing for quality control (QC) purposes. The connection...... of formulations that rely on complex intraluminal processes (e.g. solubilization, supersaturation, precipitation…) remains extremely challenging. Concomitantly, the increasing demand for complex formulations to overcome low drug solubility or to control drug release rates urges the development of new in vitro...

  5. Sex Pheromone Dosages and Release Point Densities for Mating Disruption of Ostrinia furnacalis (Lepidoptera: Crambidae) in NE China Corn Fields.

    Science.gov (United States)

    Chen, Ri-Zhao; Jow, Chung-Kuang; Klein, Michael G; Jia, Yu-di; Zhang, Da-Yu; Li, Lan-Bing

    2017-08-01

    Mating disruption of Ostrinia furnacalis (Guenée) (Lepidoptera: Crambidae) with its sex pheromone has not been commonly used in NE China due to a lack of information about optimal sex pheromone dosages and the density of release points required in the field. During 2014-2016, first, the two active pheromone ingredients were evaluated in the laboratory alone at ca. 2.5-5.0 mg, or in combination at 0.2-6.0 mg, to disrupt male O. furnacalis mating behaviors. Then, mating disruption areas, with radii of disruption treatments. Finally, 6.0 (F30) and 0.2 mg (Fs) dosages were used in fields at 20-640 and 200-6,400 release points/ha. We found that ≧6.0 mg of the binary pheromone mixture, or ca. 5.0 mg of either of the two single components, completely disrupted mating behaviors, and F30 of the binary mixture provided a 200-m2 disruption area, with at least 50% capture reductions. At a density of 60-640 and 600-6,400 points/ha in a corn field, F30 and Fs dosages provided >90% mating disruption, leaf protection, and ear protection. The dispenser densities and inverse male catches in traps tended to follow a noncompetitive mechanism of mating disruption. Since 85% disruption of mating with 200-400 0.02 mg release points/ha was obtained, that level is recommended as the choice in future NE China O. furnacalis IPM programs. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  6. Enhanced oral bioavailability and controlled release of dutasteride by a novel dry elixir.

    Science.gov (United States)

    Jang, Dong-Jin; Kim, Sung Tae; Oh, Euichaul; Ban, Eunmi

    2014-01-01

    To develop a solid dosage form of dutasteride for improving its oral bioavailability, a novel dry elixir (DE) system was fabricated. DEs incorporating dextrin and/or xanthan gum were prepared using spray-drying and evaluated by morphology, ethanol content, crystallinity, dissolution and oral bioavailability. DEs were spherical with a smooth surface and had an average particle size of 20-25 μm. The ethanol content could be easily varied by controlling the spray-drying temperature. The dissolution profiles of dutasteride from each DE proved to be much faster than that of dutasteride powder due to the amorphous state and a high amount of incorporated ethanol. In particular, the pharmacokinetic profiles of dutasteride were significantly altered depending on the proportions of dextrin and xanthan gum. Blood concentrations of dutasteride from DE formulations were similar to those of market products and much greater than those of native dutasteride. Interestingly, the dissolution and pharmacokinetic profiles were easily controlled by changing the ratio of dextrin to xanthan gum. The data suggests that a DE using dextrin and/or xanthan gum could provide an applicable solid dosage form to improve the dissolution and bio-availability of dutasteride as well as to modulate its pharmacokinetics.

  7. New oral dosage form for elderly patients. II. Release behavior of benfotiamine from silk fibroin gel.

    Science.gov (United States)

    Hanawa, T; Watanabe, A; Tsuchiya, T; Ikoma, R; Hidaka, M; Sugihara, M

    1995-05-01

    Silk fibroin gel (SFG) containing benfotiamine (BTMP) was prepared. The release behavior of BTMP from SFG was studied as a function of silk fibroin (SF) content and glycerol content, and the influence of the existence of beta-cyclodextrin (beta-CD) on the physicochemical properties of SFG were investigated. The release rate of BTMP from SFG was retarded by an increase in SF concentration. The addition of beta-CD affected both the release properties and rheological properties of the SFG. It was found from the results of the "paddle-bead method" that the release profiles of BTMP from SFG were inversely proportional to the SFG firmness.

  8. Gamma scintigraphy in the evaluation of pharmaceutical dosage forms

    International Nuclear Information System (INIS)

    Davis, S.S.; Hardy, J.G.; Newman, S.P.; Wilding, I.R.

    1992-01-01

    Gamma-scintigraphy is applied extensively in the development and evaluation of pharmaceutical drug delivery systems. It is used particularly for monitoring formulations in the gastrointestinal and respiratory tracts. The radiolabelling is generally achieved by the incorporation of an appropriate technetium-99m or indium-111 labelled radiopharmaceutical into the formulation. In the case of complex dosage forms, such as enteric-coated tablets, labelling is best undertaken by the addition of a non-radioactive tracer such as samarium-152 or erbium-170 followed by neutron activation of the final product. Systems investigated include tablets and multiparticulates for oral administration, enemas and suppositories, metered dose inhalers and nebulisers, and nasal sprays and drops. Gamma-scintigraphy provides information on the deposition, dispersion and movement of the formulation. The combination of such studies with the assay of drug levels in blood or urine specimens, pharmacoscintigraphy, provides information concerning the sites of drug release and absorption. Data acquired from the scintigraphic evaluation of pharmaceutical dosage forms are now being used increasingly at all stages of product development, from the assessment of prototype delivery systems to supporting the product licence application. (orig.)

  9. Gamma scintigraphy in the evaluation of pharmaceutical dosage forms

    Energy Technology Data Exchange (ETDEWEB)

    Davis, S.S.; Hardy, J.G.; Newman, S.P.; Wilding, I.R. (Pharmaceutical Profiles Ltd., Nottingham (United Kingdom))

    1992-11-01

    Gamma-scintigraphy is applied extensively in the development and evaluation of pharmaceutical drug delivery systems. It is used particularly for monitoring formulations in the gastrointestinal and respiratory tracts. The radiolabelling is generally achieved by the incorporation of an appropriate technetium-99m or indium-111 labelled radiopharmaceutical into the formulation. In the case of complex dosage forms, such as enteric-coated tablets, labelling is best undertaken by the addition of a non-radioactive tracer such as samarium-152 or erbium-170 followed by neutron activation of the final product. Systems investigated include tablets and multiparticulates for oral administration, enemas and suppositories, metered dose inhalers and nebulisers, and nasal sprays and drops. Gamma-scintigraphy provides information on the deposition, dispersion and movement of the formulation. The combination of such studies with the assay of drug levels in blood or urine specimens, pharmacoscintigraphy, provides information concerning the sites of drug release and absorption. Data acquired from the scintigraphic evaluation of pharmaceutical dosage forms are now being used increasingly at all stages of product development, from the assessment of prototype delivery systems to supporting the product licence application. (orig.).

  10. Multi-kinetics and site-specific release of gabapentin and flurbiprofen from oral fixed-dose combination: in vitro release and in vivo food effect.

    Science.gov (United States)

    Sonvico, Fabio; Conti, Chiara; Colombo, Gaia; Buttini, Francesca; Colombo, Paolo; Bettini, Ruggero; Barchielli, Marco; Leoni, Barbara; Loprete, Luca; Rossi, Alessandra

    2017-09-28

    In this work, a fixed-dose combination of gabapentin and flurbiprofen formulated as multilayer tablets has been designed, developed and studied in vitro and in vivo. The aim was to construct a single dosage form of the two drugs, able to perform a therapeutic program involving three release kinetics and two delivery sites, i.e., immediate release of gabapentin, intra-gastric prolonged release of gabapentin and intestinal (delayed) release of flurbiprofen. An oblong three-layer tablet was manufactured having as top layer a floating hydrophilic polymeric matrix for gastric release of gabapentin, as middle layer a disintegrating formulation for immediate release of a gabapentin loading dose and as bottom layer, an uncoated hydrophilic polymeric matrix, swellable but insoluble in gastric fluids, for delayed and prolonged release of flurbiprofen in intestinal environment. The formulations were studied in vitro and in vivo in healthy volunteers. The in vitro release rate assessment confirmed the programmed delivery design. A significant higher bioavailability of gabapentin administered 30min after meal, compared to fasting conditions or to dose administration 10min before meal, argued in favor of the gastro-retention of gabapentin prolonged release layer. The two drugs were delivered at different anatomical sites, since the food presence prolonged the gastric absorption of gabapentin from the floating layer and delayed the flurbiprofen absorption. The attainment of a successful delayed release of flurbiprofen was realized by a matrix based on a polymers' combination. The combined use of three hydrophilic polymers with different pH sensitivity provided the dosage form layer containing flurbiprofen with gastro-resistant characteristics without the use of film coating. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Safety and tolerability of flexible dosages of prolonged-release OROS methylphenidate in adults with attention-deficit/hyperactivity disorder.

    NARCIS (Netherlands)

    Buitelaar, J.K.; Ramos-Quiroga, J.A.; Casas, M.; Kooij, J.J.; Niemela, A.; Konofal, E.; Dejonckheere, J.; Challis, B.H.; Medori, R.

    2009-01-01

    The osmotic release oral system (OROS) methylphenidate formulation is a prolonged-release medication for the treatment of attention-deficit/hyperactivity disorder (ADHD) in children, adolescents, and adults. We conducted a seven-week open-label extension of a double-blind study to assess the safety

  12. QR encoded smart oral dosage forms by inkjet printing.

    Science.gov (United States)

    Edinger, Magnus; Bar-Shalom, Daniel; Sandler, Niklas; Rantanen, Jukka; Genina, Natalja

    2018-01-30

    The use of inkjet printing (IJP) technology enables the flexible manufacturing of personalized medicine with the doses tailored for each patient. In this study we demonstrate, for the first time, the applicability of IJP in the production of edible dosage forms in the pattern of a quick response (QR) code. This printed pattern contains the drug itself and encoded information relevant to the patient and/or healthcare professionals. IJP of the active pharmaceutical ingredient (API)-containing ink in the pattern of QR code was performed onto a newly developed porous and flexible, but mechanically stable substrate with a good absorption capacity. The printing did not affect the mechanical properties of the substrate. The actual drug content of the printed dosage forms was in accordance with the encoded drug content. The QR encoded dosage forms had a good print definition without significant edge bleeding. They were readable by a smartphone even after storage in harsh conditions. This approach of efficient data incorporation and data storage combined with the use of smart devices can lead to safer and more patient-friendly drug products in the future. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Predicting the oral pharmacokinetic profiles of multiple-unit (pellet) dosage forms using a modeling and simulation approach coupled with biorelevant dissolution testing: case example diclofenac sodium.

    Science.gov (United States)

    Kambayashi, Atsushi; Blume, Henning; Dressman, Jennifer B

    2014-07-01

    The objective of this research was to characterize the dissolution profile of a poorly soluble drug, diclofenac, from a commercially available multiple-unit enteric coated dosage form, Diclo-Puren® capsules, and to develop a predictive model for its oral pharmacokinetic profile. The paddle method was used to obtain the dissolution profiles of this dosage form in biorelevant media, with the exposure to simulated gastric conditions being varied in order to simulate the gastric emptying behavior of pellets. A modified Noyes-Whitney theory was subsequently fitted to the dissolution data. A physiologically-based pharmacokinetic (PBPK) model for multiple-unit dosage forms was designed using STELLA® software and coupled with the biorelevant dissolution profiles in order to simulate the plasma concentration profiles of diclofenac from Diclo-Puren® capsule in both the fasted and fed state in humans. Gastric emptying kinetics relevant to multiple-units pellets were incorporated into the PBPK model by setting up a virtual patient population to account for physiological variations in emptying kinetics. Using in vitro biorelevant dissolution coupled with in silico PBPK modeling and simulation it was possible to predict the plasma profile of this multiple-unit formulation of diclofenac after oral administration in both the fasted and fed state. This approach might be useful to predict variability in the plasma profiles for other drugs housed in multiple-unit dosage forms. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Remission in children and adolescents diagnosed with attention-deficit/hyperactivity disorder via an effective and tolerable titration scheme for osmotic release oral system methylphenidate.

    Science.gov (United States)

    Chou, Wen-Jiun; Chen, Shin-Jaw; Chen, Ying-Sheue; Liang, Hsin-Yi; Lin, Chih-Chien; Tang, Ching-Shu; Huang, Yu-Shu; Yeh, Chin-Bin; Chou, Miao-Chun; Lin, Dai-Yueh; Hou, Po-Hsun; Wu, Yu-Yu; Liu, Hung-Jen; Huang, Ya-Fen; Hwang, Kai-Ling; Chan, Chin-Hong; Pan, Chia-Ho; Chang, Hsueh-Ling; Huang, Chi-Fen; Hsu, Ju-Wei

    2012-06-01

    The purpose of this study was to identify the optimal dose of osmotic release oral system methylphenidate (OROS-MPH) using a dosage forced-titration scheme to achieve symptomatic remission in children with attention- deficit/hyperactivity disorder (ADHD). We also evaluated the efficacy and safety of, and patient and parent satisfaction with, the change in therapy from immediate-release methylphenidate (IR-MPH) to OROS-MPH over 10 weeks. We recruited 521 children and adolescents aged 6-18 years with an American Psychiatric Association, Diagnostic and Statistical Manual of Mental Disorders, 4th ed. (DSM-IV) diagnosis of ADHD, who had received IR-MPH treatments (titration phase of OROS-MPH to achieve symptomatic remission (defined as a score of 0 or 1 for each of the first 18 ADHD items in the Chinese version of the Swanson, Nolan, and Pelham, Version IV [SNAP-IV]), followed by a 4-week maintenance phase. The global ADHD severity and drug side effects of the participants were evaluated. Parents completed the ratings scales for the ADHD-related symptoms. Patient and parent satisfaction for the OROS-MPH treatment was also assessed. Among the 439 participants with ADHD who completed the trial, 290 participants (66.1%) achieved symptomatic remission. The mean dose of OROS-MPH among participants in remission was 36.7 mg (1.08 mg/kg) per day. Increased efficacy, superior satisfaction, and safety equivalent to that of IR-MPH were demonstrated in intra-individual comparisons from the baseline to the end of study. Determinants for remission included less severe ADHD symptoms (SNAP-IV score history of ADHD, and an appropriate dosage of medication according to the patient's weight. The findings suggest remission as a treatment goal for ADHD therapy by providing an optimal dosage of medication for children and adolescents with ADHD through using an effective and tolerable forced-titration scheme.

  15. Advances in solid dosage form manufacturing technology.

    Science.gov (United States)

    Andrews, Gavin P

    2007-12-15

    Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

  16. Buccal Dosage Forms: General Considerations for Pediatric Patients.

    Science.gov (United States)

    Montero-Padilla, Soledad; Velaga, Sitaram; Morales, Javier O

    2017-02-01

    The development of an appropriate dosage form for pediatric patients needs to take into account several aspects, since adult drug biodistribution differs from that of pediatrics. In recent years, buccal administration has become an attractive route, having different dosage forms under development including tablets, lozenges, films, and solutions among others. Furthermore, the buccal epithelium can allow quick access to systemic circulation, which could be used for a rapid onset of action. For pediatric patients, dosage forms to be placed in the oral cavity have higher requirements for palatability to increase acceptance and therapy compliance. Therefore, an understanding of the excipients required and their functions and properties needs to be particularly addressed. This review is focused on the differences and requirements relevant to buccal administration for pediatric patients (compared to adults) and how novel dosage forms can be less invasive and more acceptable alternatives.

  17. Geometry of modified release formulations during dissolution--influence on performance of dosage forms with diclofenac sodium.

    Science.gov (United States)

    Dorożyński, Przemysław; Kulinowski, Piotr; Jamróz, Witold; Juszczyk, Ewelina

    2014-12-30

    The objectives of the work included: presentation of magnetic resonance imaging (MRI) and fractal analysis based approach to comparison of dosage forms of different composition, structure, and assessment of the influence of the compositional factors i.e., matrix type, excipients etc., on properties and performance of the dosage form during drug dissolution. The work presents the first attempt to compare MRI data obtained for tablet formulations of different composition and characterized by distinct differences in hydration and drug dissolution mechanisms. The main difficulty, in such a case stems from differences in hydration behavior and tablet's geometry i.e., swelling, cracking, capping etc. A novel approach to characterization of matrix systems i.e., quantification of changes of geometrical complexity of the matrix shape during drug dissolution has been developed. Using three chosen commercial modified release tablet formulations with diclofenac sodium we present the method of parameterization of their geometrical complexity on the base of fractal analysis. The main result of the study is the correlation between the hydrating tablet behavior and drug dissolution - the increase of geometrical complexity expressed as fractal dimension relates to the increased variability of drug dissolution results. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Oral transmucosal delivery of domperidone from immediate release films produced via hot-melt extrusion technology.

    Science.gov (United States)

    Palem, Chinna Reddy; Kumar Battu, Sunil; Maddineni, Sindhuri; Gannu, Ramesh; Repka, Michael A; Yamsani, Madhusudan Rao

    2013-02-01

    The objective of the study was to prepare and characterize the domperidone (DOM) hot-melt extruded (HME) buccal films by both in vitro and in vivo techniques. The HME film formulations contained PEO N10 and/or its combination with HPMC E5 LV or Eudragit RL100 as polymeric carriers, and PEG3350 as a plasticizer. The blends were co-processed at a screw speed of 50 rpm with the barrel temperatures ranging from 120-160°C utilizing a bench top co-rotating twin-screw hot-melt extruder using a transverse-slit die. The HME films were evaluated for drug content, drug excipient interaction, in vitro drug release, mechanical properties, in vivo residence time, in vitro bioadhesion, swelling and erosion, ex vivo permeation from HME films and the selected optimal formulation was subjected for bioavailability studies in healthy human volunteers. The extruded films demonstrated no drug excipient interaction and excellent content uniformity. The selected HME film formulation (DOM2) exhibited a tensile strength (0.72 Kg/mm(2)), elongation at break (28.4% mm(2)), in vivo residence time (120 min), peak detachment force (1.55 N), work of adhesion (1.49 mJ), swelling index (210.2%), erosion (10.5%) and in vitro drug release of 84.8% in 2 h. Bioavailability from the optimized HME buccal films was 1.5 times higher than the oral dosage form and the results showed statistically significant (p buccal-adhesive films with improved bioavailability characteristics.

  19. A possible method using baseline hormonal levels to prescribe the appropriate oral therapeutic radioiodine dosage for Graves' disease

    International Nuclear Information System (INIS)

    Nakajo, Masayuki; Tsuchimochi, Shinsaku; Jinguji, Megumi; Tanabe, Hiroaki; Umanodan, Tomoichi; Nakabeppu, Yoshiaki

    2007-01-01

    The purpose of this study was to retrospectively examine the correlations of hormonal ratios with radioiodine I-131 therapeutic parameters and the potentiality of prescribing the therapeutic I-131 target dosage for an individual patient with Graves' disease using baseline serum levels of thyroid hormones. Serum T3, T4, and FT4 levels 6 and 12 months after I-131 therapy/baseline levels (hormonal ratios) were calculated for a total of 68 therapeutic courses in 57 patients with Graves' disease. The therapeutic parameters were absorbed dose (Gy), dose concentration (μCi/g) and oral dose (mCi). Linear regression analysis was performed for correlating hormonal ratios (X) and therapeutic parameters (Y). Significant (P<0.05) negative correlations of the hormonal ratios were observed with absorbed dose (R -0.50 for T3, -0.61 for T4, and -0.46 for FT4 at 6 months, and -0.29 for T3, -0.44 for T4 at 12 months) and dose concentration (R -0.57 for T3, -0.58 for T4, and -0.49 for FT4 at 6 months and -0.27 for T3, -0.27 for T4 at 12 months), but not with oral dose at 6 months and 12 months or the absorbed dose and dose concentration for FT4 at 12 months. The correlations were higher at 6 months than at 12 months and in serum T4 than in serum T3 and FT4. The formulae for serum T4 at 6 months were as follows: Y (Gy)=109-53X and Y (μCi/g)=109-52X. These results suggest that the hormonal ratios are significantly correlated with the absorbed dose and dose concentration. The formulae for serum T4 at 6 months may serve to prescribe the individual oral dosage for Graves' disease, although the correlation coefficients are about -0.6. (author)

  20. Drug delivery from the oral cavity: a focus on mucoadhesive buccal drug delivery systems.

    Science.gov (United States)

    Shinkar, Dattatraya Manohar; Dhake, Avinash Sridhar; Setty, Chitral Mallikarjuna

    2012-01-01

    Since the early 1980s the concept of mucoadhesion has gained considerable interest in pharmaceutical technology. The various advantages associated with these systems made buccal drug delivery as a novel route of drug administration. It prolongs the residence time of the dosage form at the site of application. These systems remain in close contact with the absorption tissue, the mucous membrane, and thus contribute to improved and/or better therapeutic performance of the drug and of both local and systemic effects. This review highlights the anatomy and structure of oral mucosa, mechanism and theories of mucoadhesion, factors affecting mucoadhesion, characteristics and properties of desired mucoadhesive polymers, various types of dosage forms, and general considerations in design of mucoadhesive buccal dosage forms, permeation enhancers, and evaluation methods. Over the past few decades the mucoadhesive buccal drug delivery system has received a great deal of attention to develop mucoadhesive dosage forms to enable the prolonged retention at the site of action, providing a controlled release of drug for improved therapeutic outcome. Mucoadhesive drug delivery gives facility to include a permeation enhancer/enzyme inhibitor or pHmodifier in the formulation and versatility in designing as multidirectional or unidirectional release systems for local and systemic action. Local delivery to tissues of the oral cavity has a number of applications, including treatment of local conditions such as periodontal disease, bacterial and fungal infections, and aphthous stomatitis and vesiculo bullous diseases. For the treatment of chronic diseases, the mucoadhesive buccal drug delivery system allows easily accessibility and is generally well-accepted for administeringdrugs by systemic action.

  1. Transforming lipid-based oral drug delivery systems into solid dosage forms: an overview of solid carriers, physicochemical properties, and biopharmaceutical performance.

    Science.gov (United States)

    Tan, Angel; Rao, Shasha; Prestidge, Clive A

    2013-12-01

    The diversity of lipid excipients available commercially has enabled versatile formulation design of lipid-based drug delivery systems for enhancing the oral absorption of poorly water-soluble drugs, such as emulsions, microemulsions, micelles, liposomes, niosomes and various self-emulsifying systems. The transformation of liquid lipid-based systems into solid dosage forms has been investigated for several decades, and has recently become a core subject of pharmaceutical research as solidification is regarded as viable means for stabilising lipid colloidal systems while eliminating stringent processing requirements associated with liquid systems. This review describes the types of pharmaceutical grade excipients (silica nanoparticle/microparticle, polysaccharide, polymer and protein-based materials) used as solid carriers and the current state of knowledge on the liquid-to-solid conversion approaches. Details are primarily focused on the solid-state physicochemical properties and redispersion capacity of various dry lipid-based formulations, and how these relate to the in vitro drug release and solubilisation, lipid carrier digestion and cell permeation performances. Numerous in vivo proof-of-concept studies are presented to highlight the viability of these dry lipid-based formulations. This review is significant in directing future research work in fostering translation of dry lipid-based formulations into clinical applications.

  2. Metabolism and elimination of methyl, iso- and n-butyl paraben in human urine after single oral dosage.

    Science.gov (United States)

    Moos, Rebecca K; Angerer, Jürgen; Dierkes, Georg; Brüning, Thomas; Koch, Holger M

    2016-11-01

    Parabens are used as preservatives in personal care and consumer products, food and pharmaceuticals. Their use is controversial because of possible endocrine disrupting properties. In this study, we investigated metabolism and urinary excretion of methyl paraben (MeP), iso-butyl paraben (iso-BuP) and n-butyl paraben (n-BuP) after oral dosage of deuterium-labeled analogs (10 mg). Each volunteer received one dosage per investigated paraben separately and at least 2 weeks apart. Consecutive urine samples were collected over 48 h. In addition to the parent parabens (free and conjugated) which are already used as biomarkers of internal exposure and the known but non-specific metabolites, p-hydroxybenzoic acid (PHBA) and p-hydroxyhippuric acid (PHHA), we identified new, oxidized metabolites with hydroxy groups on the alkyl side chain (3OH-n-BuP and 2OH-iso-BuP) and species with oxidative modifications on the aromatic ring. MeP represented 17.4 % of the dose excreted in urine, while iso-BuP represented only 6.8 % and n-BuP 5.6 %. Additionally, for iso-BuP, about 16 % was excreted as 2OH-iso-BuP and for n-BuP about 6 % as 3OH-n-BuP. Less than 1 % was excreted as ring-hydroxylated metabolites. In all cases, PHHA was identified as the major but non-specific metabolite (57.2-63.8 %). PHBA represented 3.0-7.2 %. For all parabens, the majority of the oral dose captured by the above metabolites was excreted in the first 24 h (80.5-85.3 %). Complementary to the parent parabens excreted in urine, alkyl-chain-oxidized metabolites of the butyl parabens are introduced as valuable and contamination-free biomarkers of exposure.

  3. Emergence of 3D Printed Dosage Forms: Opportunities and Challenges.

    Science.gov (United States)

    Alhnan, Mohamed A; Okwuosa, Tochukwu C; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

    2016-08-01

    The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such an extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry.

  4. Taste-masking assessment of orally disintegrating tablets and lyophilisates with cetirizine dihydrochloride microparticles

    Directory of Open Access Journals (Sweden)

    Aleksandra Amelian

    2017-12-01

    Full Text Available Orally disintegrating tablets and oral lyophilisates are novel attractive dosage forms that disintegrate or dissolve in the buccal cavity within seconds without necessity of drinking. The major limitation in designing of these dosage forms is unpleasant taste of the drug substance. Cetirizine dihydrochloride is a H1-antihistamine substance indicated for the treatment of allergy. It is characterized by extremely bitter taste, therefore in order to deliver cetirizine dihydrochloride using orodispersible formulations, effective taste-masking is required. The aim of this study was to investigate whether microparticles containing cetirizine dihydrochloride could be successfully used to formulate orally disintegrating tablets by direct compression method and oral lyophilisates by freeze-drying process. Taste masking of cetirizine dihydrochloride was achieved by the spray-drying technique using Eudragit® E PO as the drug agent carrier. Based on the preliminary studies, optimal compositions of microparticles, tablets and lyophilisates were chosen. Obtained dosage forms were characterized for drug content, disintegration time and mechanical properties. In order to determine whether the microparticles subjected to direct compression and freeze-drying process effectively mask the bitter taste of cetirizine dihydrochloride, the in vivo and in vitro evaluation was performed. The results showed that designed formulates with microparticles containing cetirizine dihydrochloride were characterized by appropriate mechanical properties, uniformity of weight and thickness, short disintegration time, and the uniform content of the drug substance. Taste-masking assessment performed by three independent methods (e-tongue evaluation, human test panel and the in vitro drug release revealed that microparticles with Eudragit® E PO are effective taste – masking carriers of cetirizine dihydrochloride and might be used to formulate orally disintegrating tablets and oral

  5. [Pharmaceutical counseling of non-conventional dosage forms concerning the health-literacy and the patient adherence in public medication dispensing -Questionnaire surveys in Hungarian community pharmacies.

    Science.gov (United States)

    Somogyi, O; Zelko, R

    Although the non-conventional dosage forms (e.g. modified release per oral systems or transdermal patches) have more significant advantages than other conventional dosage forms, the pa- tients have to apply them correctly in their home medicine using to reach the effective and safe therapy. A guideline of relevant application instructions contribute to development of an effective pharmaceutical counseling in community pharmacies. The counseling and advices can improve the patients' knowledge concerning application rules of different new dosage forms (health- literacy) with patient adherence. Finally it will result more effective and safer therapies. The aim of our Hungarian questionnaire surveys was to explore the patients' drug application habits or application errors and improve special verbal counseling of mentioned non-conventional dosage forms in community pharmacies. Understandable patient information leaflets were developed about application rules and besides the levels of patients' reading comprehension was evaluated in case of the leaflet of medicinal patches. The results show that a properly developed text is useful for the majority of patients but they need the verbal explanation as well, moreover there is a demand for the verbal counseling in community pharmacies. The most common application errors were explored and the most effective instructions or application rules were collected for the pharmacists and patients concerning the modified release tablets or capsules and transdermal patches.

  6. Dosage-based parameters for characterization of puff dispersion results.

    Science.gov (United States)

    Berbekar, Eva; Harms, Frank; Leitl, Bernd

    2015-01-01

    A set of parameters is introduced to characterize the dispersion of puff releases based on the measured dosage. These parameters are the dosage, peak concentration, arrival time, peak time, leaving time, ascent time, descent time and duration. Dimensionless numbers for the scaling of the parameters are derived from dimensional analysis. The dimensionless numbers are tested and confirmed based on a statistically representative wind tunnel dataset. The measurements were carried out in a 1:300 scale model of the Central Business District in Oklahoma City. Additionally, the effect of the release duration on the puff parameters is investigated. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Carboxymethyl starch mucoadhesive microspheres as gastroretentive dosage form.

    Science.gov (United States)

    Lemieux, Marc; Gosselin, Patrick; Mateescu, Mircea Alexandru

    2015-12-30

    Carboxymethyl starch microspheres (CMS-MS) were produced from carboxymethyl starch powder (CMS-P) with a degree of substitution (DS) from 0.1 to 1.5 in order to investigate the influence of DS on physicochemical, drug release and mucoadhesion properties as well as interactions with gastrointestinal tract (GIT) epithelial barrier models. Placebo and furosemide loaded CMS-MS were obtained by emulsion-crosslinking with sodium trimetaphosphate (STMP). DS had an impact on increasing equilibrium water uptake and modulating drug release properties of the CMS-MS according to the surrounding pH. The transepithelial electrical resistance (TEER) of NCI-N87 gastric cell monolayers was not influenced in presence of CMS-MS, whereas that of Caco-2 intestinal cell monolayers decreased with increasing DS but recovered initial values at about 15h post-treatment. CMS-MS with increasing DS also enhanced furosemide permeability across both NCI-N87 and Caco-2 monolayers at pH gradients from 3.0 to 7.4. Mucoadhesion of CMS-MS on gastric mucosa (acidic condition) increased with the DS up to 55% for a DS of 1.0 but decreased on neutral intestinal mucosa to less than 10% with DS of 0.1. The drug release, permeability enhancement and mucoadhesive properties of the CMS-MS suggest CMS-MS with DS between 0.6 and 1.0 as suitable excipient for gastroretentive oral delivery dosage forms. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. [Study on dosage form design for improving oral bioavailability of traditional Chinese medicines].

    Science.gov (United States)

    Xia, Hai-Jian; Zhang, Zhen-Hai; Yao, Dong-Dong; Jia, Xiao-Bin

    2013-09-01

    Both chemical drugs and traditional Chinese medicines have the problem of low bioavailability. However, as traditional Chinese medicines are a multi-component complex, their dosage forms are required to be designed in line with their characteristics, in order to improve the bioavailability of traditional Chinese medicines. Traditional Chinese medicines are mostly prepared into pill, powder, paste, elixir and decoction, but with such drawbacks as high administration dose and poor efficacy. With the process of modernization of traditional Chinese medicines, new-type preparations have be developed and made outstanding achievements. However, they fail to make an organic integration between traditional Chinese medicine theories and modern preparation theories. Characteristics of traditional Chinese medicines are required to be taken into account during the development of traditional Chinese medicines. In the article, multi-component preparation technology was adopted to establish a multi-component drug release system of traditional Chinese medicines on the basis of multiple components of traditional Chinese medicines.

  9. Controlled-release tablet formulation of isoniazid.

    Science.gov (United States)

    Jain, N K; Kulkarni, K; Talwar, N

    1992-04-01

    Guar (GG) and Karaya gums (KG) alone and in combination with hydroxy-propylmethylcellulose (HPMC) were evaluated as release retarding materials to formulate a controlled-release tablet dosage form of isoniazid (1). In vitro release of 1 from tablets followed non-Fickian release profile with rapid initial release. Urinary excretion studies in normal subjects showed steady-state levels of 1 for 13 h. In vitro and in vivo data correlated (r = 0.9794). The studies suggested the potentiality of GG and KG as release retarding materials in formulating controlled-release tablet dosage forms of 1.

  10. Polymer nanocomposite particles of S-nitrosoglutathione: A suitable formulation for protection and sustained oral delivery.

    Science.gov (United States)

    Wu, Wen; Gaucher, Caroline; Fries, Isabelle; Hu, Xian-Ming; Maincent, Philippe; Sapin-Minet, Anne

    2015-11-10

    S-nitrosoglutathione (GSNO) is a nitric oxide (NO) donor with therapeutic potential for cardiovascular disease treatment. Chronic oral treatment with GSNO is limited by high drug sensitivity to the environment and limited oral bioavailability, requiring the development of delivery systems able to sustain NO release. The present work describes new platforms based on polymer nanocomposite particles for the delivery of GSNO. Five types of optimized nanocomposite particles have been developed (three based on chitosan, two based on alginate sodium). Those nanocomposite particles encapsulate GSNO with high efficiency from 64% to 70% and an average size of 13 to 61 μm compatible with oral delivery. Sustained release of GSNO in vitro was achieved. Indeed, chitosan nanocomposites discharged their payload within 24h; whereas alginate nanocomposites released GSNO more slowly (10% of GSNO was still remaining in the dosage form after 24h). Their cytocompatibility toward intestinal Caco-2 cells (MTT assay) was acceptable (IC50: 6.07 ± 0.07-9.46 ± 0.08 mg/mL), demonstrating their suitability as oral delivery systems for GSNO. These delivery systems presented efficient GSNO loading and sustained release as well as cytocompatibility, showing their promise as a means of improving the oral bioavailability of GSNO and as a potential new treatment. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Development of a stability-indicating high performance liquid chromatography method for assay of erythromycin ethylsuccinate in powder for oral suspension dosage form

    Directory of Open Access Journals (Sweden)

    Fahimeh Kamarei

    2014-12-01

    Full Text Available In this study an effective method was developed to assay erythromycin ethylsuccinate for an oral suspension dosage form. The chromatographic separation was achieved on an X-Terra™ C18 analytical column. A mixture of acetonitrile–ammonium dihydrogen phosphate buffer (0.025 mol L-1 (60:40, V/V (pH 7.0 was used as the mobile phase, effluent flow rate monitored at 1.0 mL min−1, and UV detection at 205 nm. In forced degradation studies, the effects of acid, base, oxidation, UV light and temperature were investigated showing no interference in the peak of drug. The proposed method was validated in terms of specificity, linearity, robustness, precision and accuracy. The method was linear at concentrations ranging from 400 to 600 μg mL−1, precise (intra- and inter-day relative standard deviations <0.65, accurate (mean recovery; 99.5%. The impurities and degradation products of erythromycin ethylsuccinate were selectively determined with good resolution in both the raw material and the final suspension forms. The method could be useful for both routine analytical and quality control assays of erythromycin ethylsuccinate in commercial powder for an oral suspension dosage form and it could be a very powerful tool to investigate the chemical stability of erythromycin ethylsuccinate.

  12. Stability of pharmaceutical salts in solid oral dosage forms.

    Science.gov (United States)

    Nie, Haichen; Byrn, Stephen R; Zhou, Qi Tony

    2017-08-01

    Using pharmaceutical salts in solid dosage forms can raise stability concerns, especially salt dissociation which can adversely affect the product performance. Therefore, a thorough understanding of the salt instability encountered in solid-state formulations is imperative to ensure the product quality. The present article uses the fundamental theory of acid base, ionic equilibrium, relationship of pH and solubility as a starting point to illustrate and interpret the salt formation and salt disproportionation in pharmaceutical systems. The criteria of selecting the optimal salt form and the underlying theory of salt formation and disproportionation are reviewed in detail. Factors influencing salt stability in solid dosage forms are scrutinized and discussed with the case studies. In addition, both commonly used and innovative strategies for preventing salt dissociations in formulation, on storage and during manufacturing will be suggested herein. This article will provide formulation scientists and manufacturing engineers an insight into the mechanisms of salt disproportionation and salt formation, which can help them to avoid and solve the instability issues of pharmaceutical salts in the product design.

  13. Replacing carbamazepine slow-release tablets with carbamazepine suppositories: a pharmacokinetic and clinical study in children with epilepsy.

    Science.gov (United States)

    Arvidsson, J; Nilsson, H L; Sandstedt, P; Steinwall, G; Tonnby, B; Flesch, G

    1995-03-01

    A suppository for rectal administration of carbamazepine has been developed for situations in which it is unsuitable to use the oral route of administration. In an open, controlled, within-patient study, the pharmacokinetics, clinical efficacy, and tolerability of carbamazepine slow-release tablets were compared with those of carbamazepine suppositories in children with epilepsy. The pharmacokinetic part of the study comprised 22 children, and an additional nine children were included in the clinical part of the study. Treatment with slow-release tablets was replaced for 7 days with carbamazepine suppositories in bioequivalent dosage. Clinical factors such as the rate of seizures and the local tolerability were studied, and an overall assessment of efficacy was made. In the pharmacokinetic part, 24-hour plasma concentration curves for carbamazepine and carbamazepine-10,11-epoxide were recorded. The plasma concentration profiles (minimum, maximum, and mean concentrations, fluctuation index, and area under the curve) for carbamazepine and the other metabolites did not show any significant differences between oral and rectal administration when the suppository dose was increased by 25% compared to the tablets. No increase in seizure frequency was detected, and the overall assessment was very good to good in 25 of the 29 epileptic children. Increased flatulence during treatment with suppositories was noted in two children, one had anal irritation, and one had nausea/vomiting. Treatment with carbamazepine slow-release tablets in children with epilepsy can be replaced by carbamazepine suppositories in 25% higher dosage, with good clinical effect and appropriate pharmacokinetic values, when it is unsuitable to use the common oral route of administration.

  14. ORODISPERSIBLE TABLET: A Patient Friendly Dosage Form (a Review

    Directory of Open Access Journals (Sweden)

    C. K. Rameesa

    2015-03-01

    Full Text Available Background: The most common and preferred route of drug administration is through the oral route. Orodispersible tablets are gaining importance among novel oral drug delivery system as they have improved patient compliance and have some additional advantages compared to other formulation. They are also solid unit dosage forms, which disintegrate in the mouth within a minute in the presence of saliva due to superdisintegrants in the formulation. Thus this type of drug delivery helps a proper per oral administration in pediatric and geriatric population where swallowing is a matter of trouble. Various scientists have prepared orodispersible tablets by following various methods. However, the most common method is the direct compression method. Other special methods are Freeze Drying,Tablet Molding, Sublimation, Spray Drying, Mass extrusion, Phase transition process, etc. Since these tablets dissolve directly in the mouth, so, their taste is also an important factor. Various approaches have been taken in order to mask the bitter taste of the drug. A number of scientists have explored several drugs in this field. Like all other solid dosage forms, they are also evaluated in the field of hardness, friability, wetting time, moisture uptake, disintegration test and dissolution test.

  15. Zein-alginate based oral drug delivery systems: Protection and release of therapeutic proteins.

    Science.gov (United States)

    Lee, Sungmun; Kim, Yeu-Chun; Park, Ji-Ho

    2016-12-30

    Reactive oxygen species (ROS) play an important role in the development of inflammatory bowel diseases. Superoxide dismutase (SOD) has a great therapeutic potential by scavenging superoxide that is one of ROS; however, in vivo application is limited especially when it is orally administered. SOD is easily degraded in vivo by the harsh conditions of gastrointestinal tract. Here, we design a zein-alginate based oral drug delivery system that protects SOD from the harsh conditions of gastrointestinal tract and releases it in the environment of the small intestine. SOD is encapsulated in zein-alginate nanoparticles (ZAN) via a phase separation method. We demonstrate that ZAN protect SOD from the harsh conditions of the stomach or small intestine condition. ZAN (200:40) at the weight ratio of 200mg zein to 40mg of alginate releases SOD in a pH dependent manner, and it releases 90.8±1.2% of encapsulated SOD at pH 7.4 in 2h, while only 11.4±0.4% of SOD was released at pH 1.3. The encapsulation efficiency of SOD in ZAN (200:40) was 62.1±2.0%. SOD in ZAN (200:40) reduced the intracellular ROS level and it saved 88.9±7.5% of Caco-2 cells from the toxic superoxide in 4 hours. Based on the results, zein-alginate based oral drug delivery systems will have numerous applications to drugs that are easily degradable in the harsh conditions of gastrointestinal tract. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Pharmacokinetics and Adverse Effects of 3 Sustained-release Buprenorphine Dosages in Healthy Guinea Pigs (Cavia porcellus).

    Science.gov (United States)

    Zanetti, Andrea S; Putta, Sumanth K; Casebolt, Donald B; Louie, Stan G

    2017-11-01

    In guinea pigs, studies addressing the efficacy, safety, and pharmacokinetic profiles of different sustained-release buprenorphine (SRB) formulations are still in their infancy. Here we assessed the pharmacokinetic profiles of 3 SRB dosages (SR-LAB, ZooPharm; SRBLow, 0.15 mg/kg; SRBMedium, 0.3 mg/kg; and SRBHigh, 0.6 mg/kg) for 72 h after a single subcutaneous administration to 8 (4 male and 4 female) healthy guinea pigs. Body weight, fecal output, and cortisol levels were also monitored and the results compared with those of the sham group. Within the first h after administration, the maximal plasma concentration (Cmax) of the drug was 64.3 ± 9.2 ng/mL (males) and 71.3 ± 3.7 ng/mL (females) in the SRBHigh group; 11.5 ± 3.2 ng/mL (males) and 6.9 ± 0.9 ng/mL (females) in the SRBMedium group; and 2.3 ± 0.8 ng/mL (males) and 2.0 ± 0.5 ng/mL (females) in the SRBLow group. After 72 h, therapeutic levels of the drug (>1 ng/mL) were observed only in guinea pigs treated with SRBHigh (both sexes) and males treated with SRBMediu cm. Fecal output (quantity and distribution) and body weight were significantly lower in the SRB groups as compared with the sham group, and with the SRBHigh group showing larger reductions. Baseline levels of serum cortisol in healthy females (1440 ± 106 ng/mL) were significantly greater than in males (550 ± 66 ng/mL). But, independent of the sex, SRB administration significantly reduced those levels. In conclusion, the data indicate that all 3 SRB dosages can be safely used in guinea pigs. However, therapeutic levels of the drug were observed for at least 48 h only guinea pigs treated with SRBHigh and SRBMedium. Further investigation is needed to determine if these dosages can alleviate pain in guinea pigs.

  17. Modulating drug release from gastric-floating microcapsules through spray-coating layers.

    Directory of Open Access Journals (Sweden)

    Wei Li Lee

    Full Text Available Floating dosage forms with prolonged gastric residence time have garnered much interest in the field of oral delivery. However, studies had shown that slow and incomplete release of hydrophobic drugs during gastric residence period would reduce drug absorption and cause drug wastage. Herein, a spray-coated floating microcapsule system was developed to encapsulate fenofibrate and piroxicam, as model hydrophobic drugs, into the coating layers with the aim of enhancing and tuning drug release rates. Incorporating fenofibrate into rubbery poly(caprolactone (PCL coating layer resulted in a complete and sustained release for up to 8 h, with outermost non-drug-holding PCL coating layer serving as a rate-controlling membrane. To realize a multidrug-loaded system, both hydrophilic metformin HCl and hydrophobic fenofibrate were simultaneously incorporated into these spray-coated microcapsules, with metformin HCl and fenofibrate localized within the hollow cavity of the capsule and coating layer, respectively. Both drugs were observed to be completely released from these coated microcapsules in a sustained manner. Through specific tailoring of coating polymers and their configurations, piroxicam loaded in both the outer polyethylene glycol and inner PCL coating layers was released in a double-profile manner (i.e. an immediate burst release as the loading dose, followed by a sustained release as the maintenance dose. The fabricated microcapsules exhibited excellent buoyancy in simulated gastric fluid, and provided controlled and sustained release, thus revealing its potential as a rate-controlled oral drug delivery system.

  18. Effect of HPMC and mannitol on drug release and bioadhesion behavior of buccal discs of buspirone hydrochloride: In-vitro and in-vivo pharmacokinetic studies

    OpenAIRE

    Jaipal, A.; Pandey, M.M.; Charde, S.Y.; Raut, P.P.; Prasanth, K.V.; Prasad, R.G.

    2015-01-01

    Delivery of orally compromised therapeutic drug molecules to the systemic circulation via buccal route has gained a significant interest in recent past. Bioadhesive polymers play a major role in designing such buccal dosage forms, as they help in adhesion of designed delivery system to mucosal membrane and also prolong release of drug from delivery system. In the present study, HPMC (release retarding polymer) and mannitol (diluent and pore former) were used to prepare bioadhesive and control...

  19. Blunted Endogenous Opioid Release Following an Oral Amphetamine Challenge in Pathological Gamblers

    Science.gov (United States)

    Mick, Inge; Myers, Jim; Ramos, Anna C; Stokes, Paul R A; Erritzoe, David; Colasanti, Alessandro; Gunn, Roger N; Rabiner, Eugenii A; Searle, Graham E; Waldman, Adam D; Parkin, Mark C; Brailsford, Alan D; Galduróz, José C F; Bowden-Jones, Henrietta; Clark, Luke; Nutt, David J; Lingford-Hughes, Anne R

    2016-01-01

    Pathological gambling is a psychiatric disorder and the first recognized behavioral addiction, with similarities to substance use disorders but without the confounding effects of drug-related brain changes. Pathophysiology within the opioid receptor system is increasingly recognized in substance dependence, with higher mu-opioid receptor (MOR) availability reported in alcohol, cocaine and opiate addiction. Impulsivity, a risk factor across the addictions, has also been found to be associated with higher MOR availability. The aim of this study was to characterize baseline MOR availability and endogenous opioid release in pathological gamblers (PG) using [11C]carfentanil PET with an oral amphetamine challenge. Fourteen PG and 15 healthy volunteers (HV) underwent two [11C]carfentanil PET scans, before and after an oral administration of 0.5 mg/kg of d-amphetamine. The change in [11C]carfentanil binding between baseline and post-amphetamine scans (ΔBPND) was assessed in 10 regions of interest (ROI). MOR availability did not differ between PG and HV groups. As seen previously, oral amphetamine challenge led to significant reductions in [11C]carfentanil BPND in 8/10 ROI in HV. PG demonstrated significant blunting of opioid release compared with HV. PG also showed blunted amphetamine-induced euphoria and alertness compared with HV. Exploratory analysis revealed that impulsivity positively correlated with caudate baseline BPND in PG only. This study provides the first evidence of blunted endogenous opioid release in PG. Our findings are consistent with growing evidence that dysregulation of endogenous opioids may have an important role in the pathophysiology of addictions. PMID:26552847

  20. 3D printing of high drug loaded dosage forms using thermoplastic polyurethanes.

    Science.gov (United States)

    Verstraete, G; Samaro, A; Grymonpré, W; Vanhoorne, V; Van Snick, B; Boone, M N; Hellemans, T; Van Hoorebeke, L; Remon, J P; Vervaet, C

    2018-01-30

    It was the aim of this study to develop high drug loaded (>30%, w/w), thermoplastic polyurethane (TPU)-based dosage forms via fused deposition modelling (FDM). Model drugs with different particle size and aqueous solubility were pre-processed in combination with diverse TPU grades via hot melt extrusion (HME) into filaments with a diameter of 1.75 ± 0.05 mm. Subsequently, TPU-based filaments which featured acceptable quality attributes (i.e. consistent filament diameter, smooth surface morphology and good mechanical properties) were printed into tablets. The sustained release potential of the 3D printed dosage forms was tested in vitro. Moreover, the impact of printing parameters on the in vitro drug release was investigated. TPU-based filaments could be loaded with 60% (w/w) fine drug powder without observing severe shark skinning or inconsistent filament diameter. During 3D printing experiments, HME filaments based on hard TPU grades were successfully converted into personalized dosage forms containing a high concentration of crystalline drug (up to 60%, w/w). In vitro release kinetics were mainly affected by the matrix composition and tablet infill degree. Therefore, this study clearly demonstrated that TPU-based FDM feedstock material offers a lot of formulation freedom for the development of personalized dosage forms. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Oral medicines for children in the European paediatric investigation plans.

    Directory of Open Access Journals (Sweden)

    Diana A van Riet-Nales

    Full Text Available INTRODUCTION: Pharmaceutical industry is no longer allowed to develop new medicines for use in adults only, as the 2007 Paediatric Regulation requires children to be considered also. The plans for such paediatric development called Paediatric Investigation Plans (PIPs are subject to agreement by the European Medicines Agency (EMA and its Paediatric Committee (PDCO. The aim of this study was to evaluate the key characteristics of oral paediatric medicines in the PIPs and the changes implemented as a result of the EMA/PDCO review. METHODS: All PIPs agreed by 31 December 2011 were identified through a proprietary EMA-database. PIPs were included if they contained an agreed proposal to develop an oral medicine for children 0 to 11 years. Information on the therapeutic area (EMA classification system; target age range (as defined by industry and pharmaceutical characteristics (active substance, dosage form(s as listed in the PIP, strength of each dosage form, excipients in each strength of each dosage form was extracted from the EMA website or the EMA/PDCO assessment reports. RESULTS: A hundred and fifty PIPs were included corresponding to 16 therapeutic areas and 220 oral dosage forms in 431 strengths/compositions. Eighty-two PIPs (37% included tablets, 44 (20% liquids and 35 (16% dosage forms with a specific composition/strength that were stored as a solid but swallowed as a liquid e.g. dispersible tablets. The EMA/PDCO review resulted in an increase of 13 (207 to 220 oral paediatric dosage forms and 44 (387 to 431 dosage forms with a specific composition/strength. For many PIPs, the target age range was widened and the excipient composition and usability aspects modified. CONCLUSION: The EMA/PDCO review realized an increase in the number of requirements for the development of oral dosage forms and a larger increase in the number of dosage forms with a specific composition/strength, both targeting younger children. Changes to their pharmaceutical

  2. Effect of lead acetate administered orally at different dosage levels ...

    African Journals Online (AJOL)

    The project was conducted to evaluate the effect of lead administered as lead acetate at different dosage levels via drinking water in broiler chicks. Thirty-five healthy chicks were divided into seven groups (five chicks each) and one group was kept as un-medicated control. Groups A, B, C, D, E and F were medicated with ...

  3. Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 3: Review of in vitro and in vivo methods used to predict esophageal adhesion and transit time.

    Science.gov (United States)

    Drumond, Nélio; Stegemann, Sven

    2018-05-01

    The oral cavity is frequently used to administer pharmaceutical drug products. This route of administration is seen as the most accessible for the majority of patients and supports an independent therapy management. For current oral dosage forms under development, the prediction of their unintended mucoadhesive properties and esophageal transit profiles would contribute for future administration safety, as concerns regarding unintended adhesion of solid oral dosage forms (SODF) during oro-esophageal transit still remain. Different in vitro methods that access mucoadhesion of polymers and pharmaceutical preparations have been proposed over the years. The same methods might be used to test non-adhesive systems and contribute for developing safe-to-swallow technologies. Previous works have already investigated the suitability of non-animal derived in vitro methods to assess such properties. The aim of this work was to review the in vitro methodology available in the scientific literature that used animal esophageal tissue to evaluate mucoadhesion and esophageal transit of pharmaceutical preparations. Furthermore, in vivo methodology is also discussed. Since none of the in vitro methods developed are able to mimic the complex swallowing process and oro-esophageal transit, in vivo studies in humans remain as the gold standard. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. Determination of methadone hydrochloride in a maintenance dosage formulation.

    Science.gov (United States)

    Hoffmann, T J; Thompson, R D

    1975-07-01

    A colorimetric method for direct quantitative assay of methadone hydrochloride in liquid oral dosage forms is presented. The procedure involves the formation of a dye complex with bromothymol blue buffer solution. The resultant complex is extracted with benzene and measured spectrophotometrically. Duplicate tests on the formulation showed 99.2% of the labeled amount of methadone.

  5. Floating tablets for controlled release of ofloxacin via compression coating of hydroxypropyl cellulose combined with effervescent agent.

    Science.gov (United States)

    Qi, Xiaole; Chen, Haiyan; Rui, Yao; Yang, Fengjiao; Ma, Ning; Wu, Zhenghong

    2015-07-15

    To prolong the residence time of dosage forms within gastrointestinal trace until all drug released at desired rate was one of the real challenges for oral controlled-release drug delivery system. Herein, we developed a fine floating tablet via compression coating of hydrophilic polymer (hydroxypropyl cellulose) combined with effervescent agent (sodium bicarbonate) to achieve simultaneous control of release rate and location of ofloxacin. Sodium alginate was also added in the coating layer to regulate the drug release rate. The effects of the weight ratio of drug and the viscosity of HPC on the release profile were investigated. The optimized formulations were found to immediately float within 30s and remain lastingly buoyant over a period of 12 h in simulated gastric fluid (SGF, pH 1.2) without pepsin, indicating a satisfactory floating and zero-order drug release profile. In addition, the oral bioavailability experiment in New Zealand rabbits showed that, the relative bioavailability of the ofloxacin after administrated of floating tablets was 172.19%, compared to marketed common release tablets TaiLiBiTuo(®). These results demonstrated that those controlled-released floating tables would be a promising gastro-retentive delivery system for drugs acting in stomach. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. The characteristics of novel dosage forms

    Directory of Open Access Journals (Sweden)

    Milić-Aškrabić Jela

    2003-01-01

    Full Text Available The objective of pharmaceutical-technological development is to find a procedure of transforming an active substance (a drug into a drug dosage form which is not only acceptable for application, but also enables the active substance to be released following administration, pursuant to therapy objectives. The aim is that the concentration of the active substance in the action location rapidly reaches a therapeutic level and maintains an approximately constant level in the course of a particular time, according to the established therapeutic goal. The primary objective is to present the active ingredient (drug in the form and concentration/quantity that enables the corresponding therapeutic response, i.e. to control the site and rate of medicinal substance release from the drug, as well as the rate at which it reaches the membranes and surfaces to which it is absorbed, while applying a common method of administration. The procedures used to achieve this goal are becoming highly complex and demanding and are aiming at sophisticated drug delivery systems and functional packaging material. Development from the existing drug molecule, through the conventional drug dosage form, to a new system of drug "delivery" (novel delivery system, can improve the drug (active substance characteristics significantly in view of compliance (acceptability by the patient, safety and efficiency. The paper presents an overview of the most important examples of pharmaceutical forms with controlled release and advanced drug "carriers".

  7. Overview of PAT process analysers applicable in monitoring of film coating unit operations for manufacturing of solid oral dosage forms.

    Science.gov (United States)

    Korasa, Klemen; Vrečer, Franc

    2018-01-01

    Over the last two decades, regulatory agencies have demanded better understanding of pharmaceutical products and processes by implementing new technological approaches, such as process analytical technology (PAT). Process analysers present a key PAT tool, which enables effective process monitoring, and thus improved process control of medicinal product manufacturing. Process analysers applicable in pharmaceutical coating unit operations are comprehensibly described in the present article. The review is focused on monitoring of solid oral dosage forms during film coating in two most commonly used coating systems, i.e. pan and fluid bed coaters. Brief theoretical background and critical overview of process analysers used for real-time or near real-time (in-, on-, at- line) monitoring of critical quality attributes of film coated dosage forms are presented. Besides well recognized spectroscopic methods (NIR and Raman spectroscopy), other techniques, which have made a significant breakthrough in recent years, are discussed (terahertz pulsed imaging (TPI), chord length distribution (CLD) analysis, and image analysis). Last part of the review is dedicated to novel techniques with high potential to become valuable PAT tools in the future (optical coherence tomography (OCT), acoustic emission (AE), microwave resonance (MR), and laser induced breakdown spectroscopy (LIBS)). Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Radiation dosage

    Energy Technology Data Exchange (ETDEWEB)

    Finston, Roland [Health Physics, Stanford University, Stanford, CA (United States)

    1986-07-01

    Radiation dosage at Bikini Atoll is the result of current soil contamination, a relic of the nuclear weapons testing program of some 30 years ago. The principal contaminants today and some of their physical properties are listed: cesium-137, strontium-90, plutonium -239, 240 and americium-241. Cobalt-60 contributes less than 1 to the dose and is not considered significant. A resident of the atoll would accumulate radiation dose (rem) in two ways -- by exposure to radiation emanating from the ground and vegetation, and by exposure to radiation released in the spontaneous decay of radionuclides that have entered his body during the ingestion of locally grown foods. The latter process would account for some 90% of the dose; cesium-137 would be responsible for 0 90% of it. Since BARC's method of estimating dosage differs in some respects from that employed by the Lawrence Livermore National Laboratory (LLNL), (Ref.1, LLNL 1982) we are presenting our method in detail. The differences have two sources. First, the numbers used by BARC for the daily ingestion of radionuclides via the diet are higher than LLNL's. Second, BARC's calculation of dose from radionuclide intake utilizes the ICRP system. The net result is that BARC doses are consistently higher than LLNL doses, and in this respect are more conservative.

  9. Radiation dosage

    International Nuclear Information System (INIS)

    Finston, Roland

    1986-01-01

    Radiation dosage at Bikini Atoll is the result of current soil contamination, a relic of the nuclear weapons testing program of some 30 years ago. The principal contaminants today and some of their physical properties are listed: cesium-137, strontium-90, plutonium -239, 240 and americium-241. Cobalt-60 contributes less than 1 to the dose and is not considered significant. A resident of the atoll would accumulate radiation dose (rem) in two ways -- by exposure to radiation emanating from the ground and vegetation, and by exposure to radiation released in the spontaneous decay of radionuclides that have entered his body during the ingestion of locally grown foods. The latter process would account for some 90% of the dose; cesium-137 would be responsible for 0 90% of it. Since BARC's method of estimating dosage differs in some respects from that employed by the Lawrence Livermore National Laboratory (LLNL), (Ref.1, LLNL 1982) we are presenting our method in detail. The differences have two sources. First, the numbers used by BARC for the daily ingestion of radionuclides via the diet are higher than LLNL's. Second, BARC's calculation of dose from radionuclide intake utilizes the ICRP system. The net result is that BARC doses are consistently higher than LLNL doses, and in this respect are more conservative

  10. Comparative Studies on the Dissolution Profiles of Oral Ibuprofen Suspension and Commercial Tablets using Biopharmaceutical Classification System Criteria

    Science.gov (United States)

    Rivera-Leyva, J. C.; García-Flores, M.; Valladares-Méndez, A.; Orozco-Castellanos, L. M.; Martínez-Alfaro, M.

    2012-01-01

    In vitro dissolution studies for solid oral dosage forms have recently widened the scope to a variety of special dosage forms such as suspensions. For class II drugs, like Ibuprofen, it is very important to have discriminative methods for different formulations in physiological conditions of the gastrointestinal tract, which will identify different problems that compromise the drug bioavailability. In the present work, two agitation speeds have been performed in order to study ibuprofen suspension dissolution. The suspensions have been characterised relatively to particle size, density and solubility. The dissolution study was conducted using the following media: buffer pH 7.2, pH 6.8, 4.5 and 0.1 M HCl. For quantitative analysis, the UV/Vis spectrophotometry was used because this methodology had been adequately validated. The results show that 50 rpm was the adequate condition to discriminate the dissolution profile. The suspension kinetic release was found to be dependent on pH and was different compared to tablet release profile at the same experimental conditions. The ibuprofen release at pH 1.0 was the slowest. PMID:23626386

  11. A novel solid dosage form of rifampicin and isoniazid with improved functionality.

    Science.gov (United States)

    Gohel, Mukesh C; Sarvaiya, Krishnakant G

    2007-08-24

    The aim of the present investigation was to develop a novel dosage form of rifampicin and isoniazid to minimize degradation of rifampicin in acidic medium and to modulate the release of rifampicin in the stomach and isoniazid in the intestine. Gastroretentive tablets of rifampicin (150 mg) were prepared by the wet granulation method using hydroxypropyl methylcellulose, calcium carbonate, and polyethylene glycol 4000. The granules and tablets of rifampicin were characterized. Hard gelatin capsules (size 4) containing a compacted mass of isoniazid (150 mg) and dicalcium phosphate (75 mg) were enteric coated. Two tablets of rifampicin and 1 capsule (size 4) of isoniazid were put into a hard gelatin capsule (size 00). The in vitro drug release and in vitro drug degradation studies were performed. Rifampicin was released over 4 hours by zero-order kinetics from the novel dosage form. More than 90% of isoniazid was released in alkaline medium in 30 minutes. The results of dissolution studies with the US Pharmacopeia XXIII method revealed that a substantial amount of rifampicin was degraded from the immediate release capsule containing rifampicin and isoniazid powder owing to drug accumulation in the dissolution vessel and also to the presence of isoniazid. The degradation of rifampicin to 3-formyl rifampicin SV (3FRSV) was arrested (3.6%-4.8% degradation of rifampicin at 4 hours) because of the minimization of physical contact between the 2 drugs and controlled release of rifampicin in acidic medium in the modified Rossett-Rice apparatus. This study concludes that the problem of rifampicin degradation can be alleviated to a certain extent by this novel dosage form.

  12. Bioequivalence of 2 Formulations of Sildenafil Oral Soluble Film 100 mg and Sildenafil Citrate (Viagra) 100 mg Oral Tablets in Healthy Male Volunteers.

    Science.gov (United States)

    Dadey, Eric

    Sildenafil citrate tablets (VIAGRA; Pfizer Inc) have been used since 1998 as an oral therapy for the treatment of erectile dysfunction. However, in some cases, patients may have difficulty in swallowing tablets, and the need to use water to aid in the oral administration of the tablets has the potential to interrupt the sexual encounter, reduce spontaneity, and therefore decrease the quality of the experience. Two oral soluble film (OSF) formulations of sildenafil were developed using MonoSol Rx's proprietary PharmFilm technology. Both films were formulated to dissolve rapidly on the tongue, thereby releasing the drug into the oral cavity, whereupon it is swallowed without the use of water. From a patient perspective, it is anticipated that the film formulations of sildenafil citrate will provide a more compliant and discreet dosage form. The purpose of this clinical study was to compare the bioequivalence of the 2 sildenafil OSF 100 mg formulations (MonoSol Rx, LLC) with the sildenafil citrate 100 mg tablets. The design was a single-dose, randomized, open-label, 3-period, 6-sequence, 3-treatment, single-center, crossover study conducted in 18 healthy, nonsmoking male volunteers under fasting conditions, with each treatment period separated by a 7-day washout period. Plasma sildenafil concentrations were measured predose and then periodically to 24 hours after dosing. The 90% confidence intervals for plasma sildenafil AUC0-t, AUC0-∞, and Cmax for both sildenafil OSF formulations as compared with sildenafil citrate tablets were all within the 80%-125% range, indicating bioequivalence of both film formulations to sildenafil citrate tablets. Overall, the demonstrated bioequivalence coupled with the performance advantages of an OSF dosage form (ie, rapid dissolution in the mouth, can be taken without water, and can be dosed discreetly) suggest that the sildenafil OSF may provide an attractive alternative to sildenafil citrate oral tablets.

  13. Contraceptive Use Affects Overall Olfactory Performance: Investigation of Estradiol Dosage and Duration of Intake.

    Directory of Open Access Journals (Sweden)

    Kathrin Kollndorfer

    Full Text Available The influence of female sex steroids on cognitive performance and sensory perception has been investigated for decades. However, previous research that studied olfaction revealed inconsistent results. The main aim of this study was to investigate the effects of different ethinyl estradiol (EE concentrations of oral contraceptives and duration of intake on olfactory function. Forty-two healthy women, with regular intake of either high or low EE dosage over at least one year and up to 15 years participated in this study. Results revealed a significant concordance between a priori categorization in the two groups with high and low EE dosage and data-driven hierarchical clustering (p = 0.008. Furthermore, significantly higher olfactory performance was observed in women using low-dose products compared to women using high-dosed products (p = 0.019. These findings indicate different effects of pill use with regard to EE concentration. We therefore strongly recommend the acquisition of information about EE dosage of oral contraceptives to reduce potential confounding factors when investigating sensory systems.

  14. Development of Bilayer Tablets with Modified Release of Selected Incompatible Drugs.

    Science.gov (United States)

    Dhiman, Neha; Awasthi, Rajendra; Jindal, Shammy; Khatri, Smriti; Dua, Kamal

    2016-01-01

    The oral route is considered to be the most convenient and commonly-employed route for drug delivery. When two incompatible drugs need to be administered at the same time and in a single formulation, bilayer tablets are the most appropriate dosage form to administer such incompatible drugs in a single dose. The aim of the present investigation was to develop bilayered tablets of two incompatible drugs; telmisartan and simvastatin. The bilayer tablets were prepared containing telmisartan in a conventional release layer using croscarmellose sodium as a super disintegrant and simvastatin in a slow-release layer using HPMC K15M, Carbopol 934P and PVP K 30 as matrix forming polymers. The tablets were evaluated for various physical properties, drug-excipient interactions using FTIR spectroscopy and in vitro drug release using 0.1M HCl (pH 1.2) for the first hour and phosphate buffer (pH 6.8) for the remaining period of time. The release kinetics of simvastatin from the slow release layer were evaluated using the zero order, first order, Higuchi equation and Peppas equation. All the physical parameters (such as hardness, thickness, disintegration, friability and layer separation tests) were found to be satisfactory. The FTIR studies indicated the absence of interactions between the components within the individual layers, suggesting drug-excipient compatibility in all the formulations. No drug release from the slow-release layer was observed during the first hour of the dissolution study in 0.1M HCl. The release-controlling polymers had a significant effect on the release of simvastatin from the slow-release layer. Thus, the formulated bilayer tablets avoided incompatibility issues and proved the conventional release of telmisartan (85% in 45 min) and slow release of simvastatin (80% in 8 h). Stable and compatible bilayer tablets containing telmisartan and simvastatin were developed with better patient compliance as an alternative to existing conventional dosage forms.

  15. Thiolation of arabinoxylan and its application in the fabrication of controlled release mucoadhesive oral films.

    Science.gov (United States)

    Hanif, Muhammad; Zaman, Muhammad

    2017-03-20

    Mucoadhesion is an important property that helps oral drug delivery system to remain attached with buccal mucosa and hence to improve the delivery of the drug. The current study was designed to achieve the thiol modification of Arabinoxylan (ARX) and to develop a mucoadhesive oral film for the improved delivery of tizanidine hydrochloride (TZN HCl). Synthesis of thiolated arabinoxylan (TARX) was accomplished by esterification of ARX with thioglycolic acid (TGA). TARX was further used for the development of mucoadhesive oral films which were prepared by using a solvent casting technique. Formulation of the films was designed and optimized by using central composite design (CCRD), selecting TARX (X 1 ) and glycerol (X 2 ) as variables. Prepared film formulations were evaluated for mechanical strength, ex-vivo mucoadhesion, in-vitro drug release, ex-vivo drug permeation, surface morphology and drug contents. Thiolation of ARX was confirmed by fourier transform infra-red spectroscopy (FTIR) as a peak related to thiol group appeared at 2516 cm -1 . The claim of successful thiolation of ARX was strengthened by the presence of 2809.003 ± 1.03 μmoles of thiol contents per gram of the polymer, which was determined by Ellman's reagent method. From the results, it was observed that the films were of satisfactory mechanical strength and mucoadhesiveness with folding endurance greater than 300 and mucoadhesive strength 11.53 ± 0.17 N, respectively. Reasonable drug retention was observed during in-vitro dissolution (85.03% cumulative drug release) and ex-vivo permeation (78.90% cumulative amount of permeated drug) studies conducted for 8 h. Effects of varying concentrations of both polymer and plasticizer on prepared mucoadhesive oral films were evaluated by ANOVA and it was observed that glycerol can enhanced the dissolution as well as permeation of the drug while TARX has opposite impact on these parameters. In nutshell, TARX in combination with glycerolwas found

  16. Slow release of tetracycline from a mucoadhesive complex with sucralfate for eradication of Helicobacter pylori.

    Science.gov (United States)

    Higo, Shoichi; Takeuchi, Hirofumi; Yamamoto, Hiromitsu; Hino, Tomoaki; Kawashima, Yoshiaki

    2008-10-01

    Treatment composed of a gastric mucoadhesive antibiotic with slow release drug delivery is expected to be effective for the eradication of Helicobacter pylori (H. pylori). In this study, we evaluated the slow release property of the tetracycline-sucralfate acidic complex. Tetracycline was the antibiotic selected because of its complexation capacity with sucralfate. Sustained release was tested using two different dissolution test methods: paddle and flow-through cell. The adhesive paste formed from the acidic complex displayed a longer sustained release profile of tetracycline using flow-through cell method. The milder conditions of the flow-through cell method better mimicked the fasted state of the stomach, suggesting that the oral administration with fasting is appropriate for the acidic complex. Furthermore, the paste formation protected the tetracycline from decomposition under an acidic condition, which apparently contributes to long-term release. Change in the zeta potential of the acidic complex particles was helpful in clarifying the release mechanisms of the tetracycline. The data indicated that the immediate release of tetracycline in the early stage of the test was indispensable to the subsequent paste formation that enables slow release. If administrated orally with fasting, the acidic complex rapidly adheres to the gastric mucosa and sustains long-term release of the tetracycline to the gastric lumen or mucus layer. This antibiotic delivery mechanism, which requires only a minimum dosage, may be effective for efficient eradication of H. pylori.

  17. Formulation, release characteristics, and bioavailability study of gastroretentive floating matrix tablet and floating raft system of Mebeverine HCl.

    Science.gov (United States)

    El Nabarawi, Mohamed A; Teaima, Mahmoud H; Abd El-Monem, Rehab A; El Nabarawy, Nagla A; Gaber, Dalia A

    2017-01-01

    To prolong the residence time of dosage forms within the gastrointestinal tract until all drug is released at the desired rate is one of the real challenges for oral controlled-release drug delivery systems. This study was designed to develop a controlled-release floating matrix tablet and floating raft system of Mebeverine HCl (MbH) and evaluate different excipients for their floating behavior and in vitro controlled-release profiles. Oral pharmacokinetics of the optimum matrix tablet, raft system formula, and marketed Duspatalin ® 200 mg retard as reference were studied in beagle dogs. The optimized tablet formula (FT-10) and raft system formula (FRS-11) were found to float within 34±5 sec and 15±7 sec, respectively, and both remain buoyant over a period of 12 h in simulated gastric fluid. FT-10 (Compritol/HPMC K100M 1:1) showed the slowest drug release among all prepared tablet formulations, releasing about 80.2% of MbH over 8 h. In contrast, FRS-11 (Sodium alginate 3%/HPMC K100M 1%/Precirol 2%) had the greatest retardation, providing sustained release of 82.1% within 8 h. Compared with the marketed MbH product, the C max of FT-10 was almost the same, while FRS-11 maximum concentration was higher. The t max was 3.33, 2.167, and 3.0 h for marketed MbH product, FT-10, and FRS-11, respectively. In addition, the oral bioavailability experiment showed that the relative bioavailability of the MbH was 104.76 and 116.01% after oral administration of FT-10 and FRS-11, respectively, compared to marketed product. These results demonstrated that both controlled-released floating matrix tablet and raft system would be promising gastroretentive delivery systems for prolonging drug action.

  18. Effects of Agar Gel Strength and Fat on Oral Breakdown, Volatile Release, and Sensory Perception Using in Vivo and in Vitro Systems.

    Science.gov (United States)

    Frank, Damian; Eyres, Graham T; Piyasiri, Udayasika; Cochet-Broch, Maeva; Delahunty, Conor M; Lundin, Leif; Appelqvist, Ingrid M

    2015-10-21

    The density and composition of a food matrix affect the rates of oral breakdown and in-mouth flavor release as well as the overall sensory experience. Agar gels of increasing concentration (1.0, 1.7, 2.9, and 5% agarose) with and without added fat (0, 2, 5, and 10%) were spiked with seven aroma volatiles. Differences in oral processing and sensory perception were systematically measured by a trained panel using a discrete interval time intensity method. Volatile release was measured in vivo and in vitro by proton transfer reaction mass spectrometry. Greater oral processing was required as agar gel strength increased, and the intensity of flavor-related sensory attributes decreased. Volatile release was inversely related to gel strength, showing that physicochemical phenomena were the main mechanisms underlying the perceived sensory changes. Fat addition reduced the amount of oral processing and had differential effects on release, depending on the fat solubility or lipophilicity of the volatiles.

  19. Increased survival rate by local release of diclofenac in a murine model of recurrent oral carcinoma

    Directory of Open Access Journals (Sweden)

    Will OM

    2016-10-01

    Full Text Available Olga Maria Will,1,* Nicolai Purcz,2,* Athena Chalaris,3 Carola Heneweer,4,5 Susann Boretius,1 Larissa Purcz,2 Lila Nikkola,6 Nureddin Ashammakhi,6 Holger Kalthoff,7 Claus-Christian Glüer,1 Jörg Wiltfang,2 Yahya Açil,2 Sanjay Tiwari1 1Section Biomedical Imaging, Clinic for Radiology and Neuroradiology, MOIN CC, 2Department of Oral and Maxillofacial Surgery, University Hospital Schleswig-Holstein, 3Institute of Biochemistry, Christian-Albrechts-Universität zu Kiel, 4Clinic for Radiology and Neuroradiology, University Hospital Schleswig-Holstein, Kiel, 5Institute for Diagnostic and Interventional Radiology, University Hospital Cologne, Cologne, Germany; 6Department of Biomedical Engineering, Tampere University of Technology, Tampere, Finland; 7Institute for Experimental Cancer Research, University Hospital Schleswig-Holstein, Kiel, Germany *These authors contributed equally to this work Abstract: Despite aggressive treatment with radiation and combination chemotherapy following tumor resection, the 5-year survival rate for patients with head and neck cancer is at best only 50%. In this study, we examined the therapeutic potential of localized release of diclofenac from electrospun nanofibers generated from poly(d,l-lactide-co-glycolide polymer. Diclofenac was chosen since anti-inflammatory agents that inhibit cyclooxygenase have shown great potential in their ability to directly inhibit tumor growth as well as suppress inflammation-mediated tumor growth. A mouse resection model of oral carcinoma was developed by establishing tumor growth in the oral cavity by ultrasound-guided injection of 1 million SCC-9 cells in the floor of the mouth. Following resection, mice were allocated into four groups with the following treatment: 1 no treatment, 2 implanted scaffolds without diclofenac, 3 implanted scaffolds loaded with diclofenac, and 4 diclofenac given orally. Small animal ultrasound and magnetic resonance imaging were utilized for longitudinal

  20. An understanding of modified release matrix tablets behavior during drug dissolution as the key for prediction of pharmaceutical product performance - case study of multimodal characterization of quetiapine fumarate tablets.

    Science.gov (United States)

    Kulinowski, Piotr; Woyna-Orlewicz, Krzysztof; Rappen, Gerd-Martin; Haznar-Garbacz, Dorota; Węglarz, Władysław P; Dorożyński, Przemysław P

    2015-04-30

    Motivation for the study was the lack of dedicated and effective research and development (R&D) in vitro methods for oral, generic, modified release formulations. The purpose of the research was to assess multimodal in vitro methodology for further bioequivalence study risk minimization. Principal results of the study are as follows: (i) Pharmaceutically equivalent quetiapine fumarate extended release dosage form of Seroquel XR was developed using a quality by design/design of experiment (QbD/DoE) paradigm. (ii) The developed formulation was then compared with originator using X-ray microtomography, magnetic resonance imaging and texture analysis. Despite similarity in terms of compendial dissolution test, developed and original dosage forms differed in micro/meso structure and consequently in mechanical properties. (iii) These differences were found to be the key factors of failure of biorelevant dissolution test using the stress dissolution apparatus. Major conclusions are as follows: (i) Imaging methods allow to assess internal features of the hydrating extended release matrix and together with the stress dissolution test allow to rationalize the design of generic formulations at the in vitro level. (ii) Technological impact on formulation properties e.g., on pore formation in hydrating matrices cannot be overlooked when designing modified release dosage forms. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. [Technological and pharmacotherapeutic properties of selected drugs with modified release of diclofenac sodium].

    Science.gov (United States)

    Kołodziejczyk, Michał Krzysztof; Kołodziejska, Justyna; Zgoda, Marian Mikołaj

    2012-01-01

    Diclofenac and its sodium salt is one of the best-known and popular therapeutic agents from the group of NSAIDs used in medicine in many various pharmaceutical forms. Therapeutic products containing diclofenac sodium salt in doses of 100 mg and 75 mg with a qualitatively and quantitatively diversified share of excipients and a variable dosage form of the drug (solid capsules, tablets with modified release) were subjected to technological and pharmaceutical analysis. The effect of solid formulation components of polymer character making the core and the coating of the pharmaceutical form of therapeutic products on the disintegration time and pharmaceutical availability in pharmacopoeial receptor fluids was estimated. Market therapeutic products with diclofenac sodium in doses of 75 mg and 100 mg, technological analysis of the drug dosage form was conducted, disintegration time of solid oral dosage forms of the drug with diclofenac sodium salt was examined and research on pharmaceutical availability of diclofenac sodium salt from tested therapeutic products was conducted using the acid phase and the buffer phase according to the FP standards for delayed release enteral dosage forms. The experimental data was supplemented with the statistical analysis. There are three formulations in the form of solid capsules and one formulation in the form of a coated tablet. All therapeutic products bear features of a dosage form of modified release of diclofenac sodium salt, frequently of a delayed release formula in the duodenum or the small intestine with regard to the limitation of typical undesirable effects after taking NSAIDs. Considerable diversity between solid capsules and the tablet with modified release during disintegration or hydration and swelling has been observed. In the environment of a receptor fluid--purified water (pH = 7) the capsule Dicloberl retard disintegrates at the fastest rate in 5,49 minutes, and then in the order: DicloDuo 75 mg--8,13 minutes and

  2. 76 FR 78815 - Oral Dosage Form New Animal Drugs; Cyclosporine

    Science.gov (United States)

    2011-12-20

    ..., Inc. The NADA provides for the veterinary prescription use of cyclosporine oral solution, USP.... FOR FURTHER INFORMATION CONTACT: Angela K.S. Clarke, Center for Veterinary Medicine (HFV-112), Food... (cyclosporine oral solution, USP (MODIFIED)) by veterinary prescription for the control of feline allergic...

  3. [Establishment of modern multi-component sustained-release preparations of oral traditional Chinese medicines].

    Science.gov (United States)

    Xia, Hai-Jian; Zhang, Zhen-Hai; Liu, Dan; Yu, Dan-Hong; Jia, Xiao-Bin

    2013-10-01

    Traditional Chinese medicines have a long history, with a large quantity of efficient traditional Chinese medicines and prescriptions. However, the vast majority of pharmaceutical dose forms remain common preparations, with very few efficient, long-lasting and low-dose preparations. The sustain-release preparation allows sustained drug release in a longer period of time, maintains blood drug concentration, reduces the toxic effect and medication frequency, and improves medication compliance. Unlike monomer drugs, the material base of traditional Chinese medicine and compounds is multi-component, instead of single or several active monomers. Therefore, under the guidance of the Chinese medicine theories, modern multi-component sustained-release preparations were developed for oral traditional Chinese medicines, with the aim of finally improving the clinical efficacy of traditional Chinese medicines.

  4. Laūq: A Sustained-Release Dosage Form for Respiratory Disorders in Traditional Persian Medicine.

    Science.gov (United States)

    Karegar-Borzi, Hossein; Salehi, Mehdi; Rahimi, Roja

    2016-01-01

    Laūq is a pharmaceutical dosage form that had been mainly used for the treatment of various respiratory disorders in traditional Persian medicine. It is important from 2 aspects: a dosage form with efficient and optimum delivery of drugs to the respiratory tract and biological effects of its ingredients. Natural medicine in laūq has been demonstrated to act in respiratory disorders by their antitussive, antiallergic, anti-inflammatory, antioxidant, spasmolytic, and antibacterial activities. Some of these natural remedies act by most of the mentioned mechanisms such as Cydonia oblonga, Glycyrrhiza glabra, Crocus sativus, Hyssopus officinalis, Foeniculum vulgare, and honey. However, the evidence is limited including Cassia fistula, Papaver somniferum, and Drimia maritima. According to positive pharmacokinetic and pharmacodynamic aspects of laūqs, they may be considered as efficient dosage forms for delivery of drugs to the respiratory tract. For better compatibility of patients, it could be substituted laūqs with newer drug delivery systems like lozenges. © The Author(s) 2015.

  5. Sustained Release Drug Delivery Applications of Polyurethanes

    Directory of Open Access Journals (Sweden)

    Michael B. Lowinger

    2018-05-01

    Full Text Available Since their introduction over 50 years ago, polyurethanes have been applied to nearly every industry. This review describes applications of polyurethanes to the development of modified release drug delivery. Although drug delivery research leveraging polyurethanes has been ongoing for decades, there has been renewed and substantial interest in the field in recent years. The chemistry of polyurethanes and the mechanisms of drug release from sustained release dosage forms are briefly reviewed. Studies to assess the impact of intrinsic drug properties on release from polyurethane-based formulations are considered. The impact of hydrophilic water swelling polyurethanes on drug diffusivity and release rate is discussed. The role of pore formers in modulating drug release rate is examined. Finally, the value of assessing mechanical properties of the dosage form and approaches taken in the literature are described.

  6. Cognitive Improvement of Attention and Inhibition in the Late Afternoon in Children With Attention-Deficit Hyperactivity Disorder (ADHD) Treated With Osmotic-Release Oral System Methylphenidate.

    Science.gov (United States)

    Slama, Hichem; Fery, Patrick; Verheulpen, Denis; Vanzeveren, Nathalie; Van Bogaert, Patrick

    2015-07-01

    Long-acting medications have been developed and approved for use in the treatment of attention-deficit hyperactivity disorder (ADHD). These compounds are intended to optimize and maintain symptoms control throughout the day. We tested prolonged effects of osmotic-release oral system methylphenidate on both attention and inhibition, in the late afternoon. A double-blind, randomized, placebo-controlled study was conducted in 36 boys (7-12 years) with ADHD and 40 typically developing children. The ADHD children received an individualized dose of placebo or osmotic-release oral system methylphenidate. They were tested about 8 hours after taking with 2 continuous performance tests (continuous performance test-X [CPT-X] and continuous performance test-AX [CPT-AX]) and a counting Stroop. A positive effect of osmotic-release oral system methylphenidate was present in CPT-AX with faster and less variable reaction times under osmotic-release oral system methylphenidate than under placebo, and no difference with typically developing children. In the counting Stroop, we found a decreased interference with osmotic-release oral system methylphenidate but no difference between children with ADHD under placebo and typically developing children. © The Author(s) 2014.

  7. Oral ketamine for children with chronic pain: a pilot phase 1 study

    Science.gov (United States)

    Bredlau, Amy-Lee; McDermott, Michael P.; Adams, Heather; Dworkin, Robert H; Venuto, Charles; Fisher, Susan; Dolan, James G; Korones, David N

    2013-01-01

    Objective To assess whether oral ketamine aids is is safe at higher dosages for sedating children and whether it may be an option for control of chronic pain in children. Study design A prospective study was performed on 12 children with chronic pain to identify the maximum tolerated dosage of oral ketamine. Participants were given 14 days of oral ketamine, three times daily, at dosages ranging from 0.25–1.5 mg/kg/dose. Participants were assessed for toxicity and for pain severity at baseline and on day 14 of treatment. Results Two participants, both treated at 1.5 mg/kg/dose, experienced dose-limiting toxicities (sedation and anorexia). One participant, treated at 1 mg/kg/dose, opted to stop ketamine treatment due to new pain on treatment. Nine participants completed their course of ketamine treatment. Of these 12 children, 5 experienced improvement in their pain scores, two with complete resolution of pain, lasting for more than 4 weeks off ketamine treatment. Conclusion Oral ketamine at dosages of 0.25–1 mg/kg/dose appears to be safe when given for 14 days to children with chronic pain. PMID:23403253

  8. Continuous powder feeding for pharmaceutical solid dosage form manufacture: a short review.

    Science.gov (United States)

    Blackshields, Caroline A; Crean, Abina M

    2018-07-01

    There has been a noticeable shift from pharmaceutical batch processing towards a more continuous mode of manufacture for solid oral dosage forms. Continuous solid oral dose processes would not be possible in the absence of a highly accurate feeding system. The performance of feeders defines the content of formulations and is therefore a critical operation in continuous manufacturing of solid dosage forms. It was the purpose of this review to review the role of the initial powder feeding step in a continuous manufacturing process. Different feeding mechanisms are discussed with a particular emphasis on screw controlled loss in weight (LIW) feeding. The importance of understanding the physical properties of the raw materials and its impact on the feeding process is reviewed. Prior knowledge of materials provides an initial indication of how the powders will behave through processing and facilitates in the selection of the most suitable (i) feeder (capacity), (ii) feeding mechanism, and (iii) in the case of screw feeder - screw type. The studies identified in this review focus on the impact of material on powder feeding performance.

  9. Physicochemical characterization of berberine chloride: a perspective in the development of a solution dosage form for oral delivery.

    Science.gov (United States)

    Battu, Sunil Kumar; Repka, Michael A; Maddineni, Sindhuri; Chittiboyina, Amar G; Avery, Mitchell A; Majumdar, Soumyajit

    2010-09-01

    The objective of the present research was to evaluate the physicochemical characteristics of berberine chloride and to assess the complexation of drug with 2-hydroxypropyl-β-cyclodextrin (HPβCD), a first step towards solution dosage form development. The parameters such as log P value were determined experimentally and compared with predicted values. The pH-dependent aqueous solubility and stability were investigated following standard protocols at 25°C and 37°C. Drug solubility enhancement was attempted utilizing both surfactants and cyclodextrins (CDs), and the drug/CD complexation was studied employing various techniques such as differential scanning calorimetry, Fourier transform infrared, nuclear magnetic resonance, and scanning electron microscopy. The experimental log P value suggested that the compound is fairly hydrophilic. Berberine chloride was found to be very stable up to 6 months at all pH and temperature conditions tested. Aqueous solubility of the drug was temperature dependent and exhibited highest solubility of 4.05 ± 0.09 mM in phosphate buffer (pH 7.0) at 25°C, demonstrating the effect of buffer salts on drug solubility. Decreased drug solubility was observed with increasing concentrations of ionic surfactants such as sodium lauryl sulfate and cetyl trimethyl ammonium bromide. Phase solubility studies demonstrated the formation of berberine chloride-HPβCD inclusion complex with 1:1 stoichiometry, and the aqueous solubility of the drug improved almost 4.5-fold in the presence of 20% HPβCD. The complexation efficiency values indicated that the drug has at least threefold greater affinity for hydroxypropyl-β-CD compared to randomly methylated-β-CD. The characterization techniques confirmed inclusion complex formation between berberine chloride and HPβCD and demonstrated the feasibility of developing an oral solution dosage form of the drug.

  10. 21 CFR 520.530 - Cythioate oral liquid.

    Science.gov (United States)

    2010-04-01

    ... greyhounds or in animals that are pregnant, sick, under stress, or recovering from surgery. Federal law... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.530 Cythioate oral liquid. (a...

  11. Pharmacokinetics and Pharmacodynamics of Tamsulosin in its Modified-Release and Oral Controlled Absorption System Formulations

    NARCIS (Netherlands)

    Franco-Salinas, Gabriela; de La Rosette, Jean J. M. C. H.; Michel, Martin C.

    2010-01-01

    Tamsulosin is an alpha(1)-adrenoceptor antagonist used for the treatment of lower urinary tract symptoms that are suggestive of benign prostatic hyperplasia. It is mostly used in a modified-release (M R) Formulation. but an oral controlled absorption system (OCAS) and a 'without-water' tablet

  12. Oral Delivery of Probiotics in Poultry Using pH-Sensitive Tablets.

    Science.gov (United States)

    Jiang, Tao; Li, Hui-Shan; Han, Geon Goo; Singh, Bijay; Kang, Sang-Kee; Bok, Jin-Duck; Kim, Dae-Duk; Hong, Zhong-Shan; Choi, Yun-Jaie; Cho, Chong-Su

    2017-04-28

    As alternatives to antibiotics in livestocks, probiotics have been used, although most of them in the form of liquid or semisolid formulations, which show low cell viability after oral administration. Therefore, suitable dry dosage forms should be developed for livestocks to protect probiotics against the low pH in the stomach such that the products have higher probiotics survivability. Here, in order to develop a dry dosage forms of probiotics for poultry, we used hydroxypropyl methylcellulose phthalate 55 (HPMCP 55) as a tablet-forming matrix to develop probiotics in a tablet form for poultry. Here, we made three different kinds of probiotics-loaded tablet under different compression forces and investigated their characteristics based on their survivability, morphology, disintegration time, and kinetics in simulated gastrointestinal fluid. The results indicated that the probiotics formulated in the tablets displayed higher survival rates in acidic gastric conditions than probiotics in solution. Rapid release of the probiotics from the tablets occurred in simulated intestinal fluid because of fast swelling of the tablets in neutral pH. As a matrix of tablet, HPMCP 55 provided good viability of probiotics after 6 months under refrigeration. Moreover, after oral administration of probiotics-loaded tablets to chicken, more viable probiotics were observed, than with solution type, through several digestive areas of chicken by the tablets.

  13. Preparation and Evaluation of Buccal Bioadhesive Films Containing Clotrimazole

    OpenAIRE

    Singh, S.; Jain, S.; Muthu, M. S.; Tiwari, S.; Tilak, R.

    2008-01-01

    Buccal bioadhesive films, releasing topical drugs in the oral cavity at a slow and predetermined rate, provide distinct advantages over traditional dosage forms. The aim of present study was to prepare and evaluate buccal bioadhesive films of clotrimazole for oral candidiasis. The film was designed to release the drug at a concentration above the minimum inhibitory concentration for a prolonged period of time so as to reduce the frequency of administration of the available conventional dosage...

  14. 75 FR 26646 - Oral Dosage Form New Animal Drugs; Orbifloxacin Suspension

    Science.gov (United States)

    2010-05-12

    .... The NADA provides for the veterinary prescription use of an oral suspension containing orbifloxacin... 12, 2010. FOR FURTHER INFORMATION CONTACT: Melanie R. Berson, Center for Veterinary Medicine (HFV-110..., filed NADA 141-305 that provides for veterinary prescription use of ORBAX (orbifloxacin) Oral Suspension...

  15. Oral sustained release tablets of zidovudine using binary blends of natural and synthetic polymers.

    Science.gov (United States)

    Emeje, Martins; Olaleye, Olajide; Isimi, Christiana; Fortunak, Joseph; Byrn, Stephen; Kunle, Olobayo; Ofoefule, Sabinus

    2010-01-01

    Oral sustained release matrix tablets of zidovudine (ZDV) were prepared using different types, proportions and blends of carbopol 71G (C71) and a plant gum obtained from Abelmoschus esculentus (AEG). The effect of various formulation factors like polymer proportion, polymer type and pH of the dissolution medium on the in vitro release of the drug was studied, using the half change technique, in 900 ml of dissolution medium, at 100 rpm. Release kinetics were analyzed using Zero-order, Higuchi's square-root and Ritger-Peppas' empirical equations. In vitro release performance as revealed by the time taken for 70% of the drug to be released (t70%), showed that the release rate decreased with increase in polymer proportion. Matrix tablets containing 10 and 20% AEG were found to exhibit immediate-release characteristics. Matrix tablets containing 30% AEG showed t70% value of 204 min and extended the release up to 5 h, while matrix tablets containing 30% carbopol showed t70% value of 234 min and extended the release up to 6 h. Three blends of AEG and C71 at the ratio of 1:2, 2:1 and 1:3 showed t70% values of 132, 312 and 102 min respectively and extended the release up to 8 h. Mathematical analysis of the release kinetics indicated that the nature of drug release from the matrix tablets followed Fickian and anomalous release. Drug release from matrix tablets of zidovudine containing blends of AEG and C71 demonstrates the advantage of blending a natural and synthetic polymer over single polymer use.

  16. Long-term (5 years), high daily dosage of dietary agmatine--evidence of safety: a case report.

    Science.gov (United States)

    Gilad, Gad M; Gilad, Varda H

    2014-11-01

    There is presently a great interest in the therapeutic potential of agmatine, decarboxylated arginine, for various diseases. Recent clinical studies have already shown that oral agmatine sulfate given for up to 3 weeks provides a safe and, as compared with current therapeutics, more effective treatment for neuropathic pain. These studies have ushered in the use of dietary agmatine as a nutraceutical. However, in view of information paucity, assessment of long-term safety of oral agmatine treatment is now clearly required. The authors of this report undertook to assess their own health status during ongoing consumption of a high daily dosage of oral agmatine over a period of 4-5 years. A daily dose of 2.67 g agmatine sulfate was encapsulated in gelatin capsules; the regimen consists of six capsules daily, each containing 445 mg, three in the morning and three in the evening after meals. Clinical follow-up consists of periodic physical examinations and laboratory blood and urine analyses. All measurements thus far remain within normal values and good general health status is sustained throughout the study period, up to 5 years. This case study shows for the first time that the recommended high dosage of agmatine may be consumed for at least 5 years without evidence of any adverse effects. These initial findings are highly important as they provide significant evidence for the extended long-term safety of a high daily dosage of dietary agmatine--a cardinal advantage for its utility as a nutraceutical.

  17. Oral Solid Dosage Form Disintegration Testing - The Forgotten Test.

    Science.gov (United States)

    Al-Gousous, Jozef; Langguth, Peter

    2015-09-01

    Since its inception in the 1930s, disintegration testing has become an important quality control (QC) test in pharmaceutical industry, and disintegration test procedures for various dosage forms have been described by the different pharmacopoeias, with harmonization among them still not quite complete. However, because of the fact that complete disintegration does not necessarily imply complete dissolution, much more research has been focused on dissolution rather than on disintegration testing. Nevertheless, owing to its simplicity, disintegration testing seems to be an attractive replacement to dissolution testing as recognized by the International Conference on Harmonization guidelines, in some cases. Therefore, with proper research being carried out to overcome the associated challenges, the full potential of disintegration testing could be tapped saving considerable efforts allocated to QC testing and quality assurance. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  18. Effect of HPMC and mannitol on drug release and bioadhesion behavior of buccal discs of buspirone hydrochloride: In-vitro and in-vivo pharmacokinetic studies.

    Science.gov (United States)

    Jaipal, A; Pandey, M M; Charde, S Y; Raut, P P; Prasanth, K V; Prasad, R G

    2015-07-01

    Delivery of orally compromised therapeutic drug molecules to the systemic circulation via buccal route has gained a significant interest in recent past. Bioadhesive polymers play a major role in designing such buccal dosage forms, as they help in adhesion of designed delivery system to mucosal membrane and also prolong release of drug from delivery system. In the present study, HPMC (release retarding polymer) and mannitol (diluent and pore former) were used to prepare bioadhesive and controlled release buccal discs of buspirone hydrochloride (BS) by direct compression method. Compatibility of BS with various excipients used during the study was assessed using DSC and FTIR techniques. Effect of mannitol and HPMC on drug release and bioadhesive strength was studied using a 3(2) factorial design. The drug release rate from delivery system decreased with increasing levels of HPMC in formulations. However, bioadhesive strength of formulations increased with increasing proportion of HPMC in buccal discs. Increased levels of mannitol resulted in faster rate of drug release and rapid in vitro uptake of water due to the formation of channels in the matrix. Pharmacokinetic studies of designed bioadhesive buccal discs in rabbits demonstrated a 10-fold increase in bioavailability in comparison with oral bioavailability of buspirone reported.

  19. An evaluation of two types of nickel-titanium wires in terms of micromorphology and nickel ions' release following oral environment exposure.

    Science.gov (United States)

    Ghazal, Abdul Razzak A; Hajeer, Mohammad Y; Al-Sabbagh, Rabab; Alghoraibi, Ibrahim; Aldiry, Ahmad

    2015-01-01

    This study aimed to compare superelastic and heat-activated nickel-titanium orthodontic wires' surface morphology and potential release of nickel ions following exposure to oral environment conditions. Twenty-four 20-mm-length distal cuts of superelastic (NiTi Force I®) and 24 20-mm-length distal cuts of heat-activated (Therma-Ti Lite®) nickel-titanium wires (American Orthodontics, Sheboygan, WI, USA) were divided into two equal groups: 12 wire segments left unused and 12 segments passively exposed to oral environment for 1 month. Scanning electron microscopy and atomic force microscopy were used to analyze surface morphology of the wires which were then immersed in artificial saliva for 1 month to determine potential nickel ions' release by means of atomic absorption spectrophotometer. Heat-activated nickel-titanium (NiTi) wires were rougher than superelastic wires, and both types of wires released almost the same amount of Ni ions. After clinical exposure, more surface roughness was recorded for superelastic NiTi wires and heat-activated NiTi wires. However, retrieved superelastic NiTi wires released less Ni ions in artificial saliva after clinical exposure, and the same result was recorded regarding heat-activated wires. Both types of NiTi wires were obviously affected by oral environment conditions; their surface roughness significantly increased while the amount of the released Ni ions significantly declined.

  20. Gestational Diabetes Mellitus Management with Oral Hypoglycemic Agents

    Science.gov (United States)

    Ryu, Rachel J.; Hays, Karen E.; Hebert, Mary F.

    2014-01-01

    Oral hypoglycemic agents such as glyburide (second generation sulfonylurea) and metformin (biguanide) are attractive alternatives to insulin due to lower cost, ease of administration, and better patient adherence. The majority of evidence from retrospective and prospective studies suggests comparable efficacy and safety of oral hypoglycemic agents such as glyburide and metformin as compared to insulin when used in the treatment of women with gestational diabetes mellitus (GDM). Glyburide and metformin have altered pharmacokinetics during pregnancy and both agents cross the placenta. In this article, we review the efficacy, safety and dosage of oral hypoglycemic agents for the treatment of gestational diabetes mellitus. Additional research is needed to evaluate optimal dosage for glyburide and metformin during pregnancy. Comparative studies evaluating the effects of glyburide and metformin on long-term maternal and fetal outcomes are also needed. PMID:25315294

  1. Oral transmucosal drug delivery for pediatric use.

    Science.gov (United States)

    Lam, Jenny K W; Xu, Yingying; Worsley, Alan; Wong, Ian C K

    2014-06-01

    The formulation of medicines for children remains a challenge. An ideal pediatric formulation must allow accurate dose administration and be in a dosage form that can be handled by the target age group. It is also important to consider the choices and the amount of excipients used in the formulation for this vulnerable age group. Although oral formulations are generally acceptable to most pediatric patients, they are not suitable for drugs with poor oral bioavailability or when a rapid clinical effect is required. In recent years, oral transmucosal delivery has emerged as an attractive route of administration for pediatric patients. With this route of administration, a drug is absorbed through the oral mucosa, therefore bypassing hepatic first pass metabolism and thus avoiding drug degradation or metabolism in the gastrointestinal tract. The high blood flow and relatively high permeability of the oral mucosa allow a quick onset of action to be achieved. It is a simple and non-invasive route of drug administration. However, there are several barriers that need to be overcome in the development of oral transmucosal products. This article aims to provide a comprehensive review of the current development of oral transmucosal delivery specifically for the pediatric population in order to achieve systemic drug delivery. The anatomical and physiological properties of the oral mucosa of infants and young children are carefully examined. The different dosage forms and formulation strategies that are suitable for young patients are discussed. © 2013.

  2. Understanding aroma release from model cheeses by a statistical multiblock approach on oral processing.

    Directory of Open Access Journals (Sweden)

    Gilles Feron

    Full Text Available For human beings, the mouth is the first organ to perceive food and the different signalling events associated to food breakdown. These events are very complex and as such, their description necessitates combining different data sets. This study proposed an integrated approach to understand the relative contribution of main food oral processing events involved in aroma release during cheese consumption. In vivo aroma release was monitored on forty eight subjects who were asked to eat four different model cheeses varying in fat content and firmness and flavoured with ethyl propanoate and nonan-2-one. A multiblock partial least square regression was performed to explain aroma release from the different physiological data sets (masticatory behaviour, bolus rheology, saliva composition and flux, mouth coating and bolus moistening. This statistical approach was relevant to point out that aroma release was mostly explained by masticatory behaviour whatever the cheese and the aroma, with a specific influence of mean amplitude on aroma release after swallowing. Aroma release from the firmer cheeses was explained mainly by bolus rheology. The persistence of hydrophobic compounds in the breath was mainly explained by bolus spreadability, in close relation with bolus moistening. Resting saliva poorly contributed to the analysis whereas the composition of stimulated saliva was negatively correlated with aroma release and mostly for soft cheeses, when significant.

  3. An oral multiparticulate, modified-release, hydrocortisone replacement therapy that provides physiological cortisol exposure.

    Science.gov (United States)

    Whitaker, Martin; Debono, Miguel; Huatan, Hiep; Merke, Deborah; Arlt, Wiebke; Ross, Richard J

    2014-04-01

    It is not possible with current hydrocortisone replacement to mimic the diurnal cortisol profile in patients with adrenal insufficiency. Previous attempts with modified-release technology were unsuccessful. Our objective was to develop hydrocortisone formulations that recreate the diurnal cortisol profile using multiparticulate technology. Screening by in vitro dissolution profiles, pharmacokinetic (PK) testing in dexamethasone-suppressed dogs and humans, and comparison with a reference population. Field laboratories and clinical research facility. Formulations were generated using an enteric (delayed release) design configuration with an extended (sustained release) dissolution profile. In vitro dissolution confirmed delayed and sustained hydrocortisone release. However, in dogs and humans, sustained release resulted in reduced bioavailability. A formulation, DIURF-006, was developed that maintained delayed release but omitted the sustained-release functionality. PK characterization of DIURF-006 showed that, despite absence of a sustained-release component, absorption was sufficiently sustained to deliver extended hydrocortisone absorption. In dexamethasone-suppressed volunteers (n = 16) receiving a twice-daily 'toothbrush' regimen (20 mg at 23:00 h and 10 mg at 07:00 h), DIURF-006 gave a similar cortisol profile to physiological cortisol levels: DIURF-006 vs physiological, Geomean AUC 5610 vs 4706 h * nmol/l, Geomean Cmax 665 vs 594 nmol/l and Median Tmax 8·5 h vs clock time 08:12 h for peak cortisol. The relative bioavailability of DIURF-006 vs hydrocortisone was 89%, and cortisol levels increased linearly with doses between 5 and 30 mg. A multiparticulate oral hydrocortisone formulation with only an enteric coat provides delayed and sustained absorption and when given in a 'toothbrush' regimen provides physiological cortisol exposure. © 2013 John Wiley & Sons Ltd.

  4. Oral delivery of medications to companion animals: palatability considerations.

    Science.gov (United States)

    Thombre, Avinash G

    2004-06-23

    There is an increased need for highly palatable solid oral dosage forms for companion animals, which are voluntarily accepted by the dog or cat, either from a feeding bowl or from the outstretched hand of the pet owner. Such dosage forms represent an emerging trend in companion animal formulations with major impact on medical needs such as convenience and compliance, particularly for chronically administered medications, and on marketing needs such as product differentiation. This review focuses on the science of taste, food and flavor preferences of dogs and cats, and palatability testing, in the context of applying these principles to the development of an oral palatable tablet for companion animals.

  5. Delivery of bioactive peptides and proteins across oral (buccal) mucosa.

    Science.gov (United States)

    Senel, S; Kremer, M; Nagy, K; Squier, C

    2001-06-01

    The identification of an increasing array of highly potent, endogenous peptide and protein factors termed cytokines, that can be efficiently synthesized using recombinant DNA technology, offers exciting new approaches for drug therapy. However, the physico-chemical and biological properties of these agents impose limitations in formulation and development of optimum drug delivery systems as well as on the routes of delivery. Oral mucosa, including the lining of the cheek (buccal mucosa), floor of mouth and underside of tongue (sublingual mucosa) and gingival mucosa, has received much attention in the last decade because it offers excellent accessibility, is not easily traumatized and avoids degradation of proteins and peptides that occurs as a result of oral administration, gastrointestinal absorption and first-pass hepatic metabolism. Peptide absorption occurs across oral mucosa by passive diffusion and it is unlikely that there is a carrier-mediated transport mechanism. The principal pathway is probably via the intercellular route where the major permeability barrier is represented by organized array of neutral lipids in the superficial layers of the epithelium. The relative role of aqueous as opposed to the lipid pathway in drug transport is still under investigation; penetration is not necessarily enhanced by simply increasing lipophilicity, for other effects, such as charge and molecular size, also play an important role in absorption of peptide and protein drugs. Depending on the pharmacodynamics of the peptides, various oral mucosal delivery systems can be designed. Delivery of peptide/protein drugs by conventional means such as solutions has some limitations. The possibility of excluding a major part of drug from absorption by involuntary swallowing and the continuous dilution due to salivary flow limits a controlled release. However these limitations can be overcome by adhesive dosage forms such as gels, films, tablets, and patches. They can localize the

  6. Importance of levonorgestrel dose in oral contraceptives for effects on coagulation

    NARCIS (Netherlands)

    Kluft, C.; Maat, M.P.M. de; Heinemann, L.A.J.; Spannagl, M.; Schramm, W.

    1999-01-01

    Combined oral contraceptives show clear differences in effect on the tissue factor-initiated coagulation test of activated protein C resistance, which is dependent on the presence and dosage of levonorgestrel. Multiphasic levonorgestrol oral contraceptives differ from monophasic contraceptives and

  7. Comparison of the cardiovascular effects of tamsulosin oral controlled absorption system (OCAS) and alfuzosin prolonged release (XL)

    NARCIS (Netherlands)

    Michel, Martin C.; Chapple, Christopher R.

    2006-01-01

    OBJECTIVE: The cardiovascular (CV) effects of tamsulosin oral controlled absorption system (OCAS) 0.4 mg were compared with those of alfuzosin prolonged release (XL) 10 mg. METHODS: Two single-dose, crossover studies were performed. In study 1, CV alpha1-adrenoceptor antagonism was assessed by

  8. The biopharmaceutics of successful controlled release drug product: Segmental-dependent permeability of glipizide vs. metoprolol throughout the intestinal tract.

    Science.gov (United States)

    Zur, Moran; Cohen, Noa; Agbaria, Riad; Dahan, Arik

    2015-07-15

    The purpose of this work was to study the challenges and prospects of regional-dependent absorption in a controlled-release scenario, through the oral biopharmaceutics of the sulfonylurea antidiabetic drug glipizide. The BCS solubility class of glipizide was determined, and its physicochemical properties and intestinal permeability were thoroughly investigated, both in-vitro (PAMPA and Caco-2) and in-vivo in rats. Metoprolol was used as the low/high permeability class boundary marker. Glipizide was found to be a low-solubility compound. All intestinal permeability experimental methods revealed similar trend; a mirror image small intestinal permeability with opposite regional/pH-dependency was obtained, a downward trend for glipizide, and an upward trend for metoprolol. Yet the lowest permeability of glipizide (terminal Ileum) was comparable to the lowest permeability of metoprolol (proximal jejunum). At the colon, similar permeability was evident for glipizide and metoprolol, that was higher than metoprolol's jejunal permeability. We present an analysis that identifies metoprolol's jejunal permeability as the low/high permeability class benchmark anywhere throughout the intestinal tract; we show that the permeability of both glipizide and metoprolol matches/exceeds this threshold throughout the entire intestinal tract, accounting for their success as controlled-release dosage form. This represents a key biopharmaceutical characteristic for a successful controlled-release dosage form. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Development of polymer film dosage forms of lidocaine for buccal administration: II. Comparison of preparation methods.

    Science.gov (United States)

    Okamoto, Hirokazu; Nakamori, Takahiko; Arakawa, Yotaro; Iida, Kotaro; Danjo, Kazumi

    2002-11-01

    In previous studies, we prepared film dosage forms of lidocaine (LC) with hydroxypropylcellulose (HPC) as a film base using the solvent evaporation (SE) method. However, from the viewpoint of environmental issues, a reduction in organic solvent use in pharmaceutical and other industries is required. In this study, we prepared the LC films by direct compression of the physical mixture (DCPM method) and direct compression of the spray dried powder (DCSD method). Magnesium stearate, which was required as a lubricant for direct compression, showed no effect on the LC release rate. The LC release rate (%/h) was independent of the compression pressure, but a higher pressure was preferable to easily remove the film from the punches. An increase in the film weight decreased the LC release rate expressed in %/h, whereas no significant effect of film weight was observed on the LC release rate from unit surface area expressed in mg/h/cm(2). The LC release rate (%/h) was independent of the LC content, suggesting that the LC release rate (mg/h) can be quantitatively controlled by changing the LC content in the formulation. The LC release rate and penetration rate were affected by the preparation method; that is, DCPM method dosage form. Copyright 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 91:2424-2432, 2002

  10. 21 CFR 520.1920 - Prochlorperazine, isopropamide sustained release capsules.

    Science.gov (United States)

    2010-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS... dogs in which gastrointestinal disturbances are associated with emotional stress. (2)(i) Capsules...

  11. A systematic review of the use of dosage form manipulation to obtain required doses to inform use of manipulation in paediatric practice.

    Science.gov (United States)

    Richey, Roberta H; Hughes, Clare; Craig, Jean V; Shah, Utpal U; Ford, James L; Barker, Catrin E; Peak, Matthew; Nunn, Anthony J; Turner, Mark A

    2017-02-25

    This study sought to determine whether there is an evidence base for drug manipulation to obtain the required dose, a common feature of paediatric clinical practice. A systematic review of the data sources, PubMed, EMBASE, CINAHL, IPA and the Cochrane database of systematic reviews, was used. Studies that considered the dose accuracy of manipulated medicines of any dosage form, evidence of safety or harm, bioavailability, patient experience, tolerability, contamination and comparison of methods of manipulation were included. Case studies and letters were excluded. Fifty studies were eligible for inclusion, 49 of which involved tablets being cut, split, crushed or dispersed. The remaining one study involved the manipulation of suppositories of one drug. No eligible studies concerning manipulation of oral capsules or liquids, rectal enemas, nebuliser solutions, injections or transdermal patches were identified. Twenty four of the tablet studies considered dose accuracy using weight and/or drug content. In studies that considered weight using adapted pharmacopoeial specifications, the percentage of halved tablets meeting these specifications ranged from 30% to 100%. Eighteen studies investigated bioavailability, pharmacokinetics or clinical outcomes following manipulations which included nine delayed or modified release formulations. In each of these nine studies the entirety of the dosage form was administered. Only one of the 18 studies was identified where drugs were manipulated to obtain a proportion of the dosage form, and that proportion administered. The five studies that considered patient perception found that having to manipulate the tablets did not have a negative impact on adherence. Of the 49 studies only two studies reported investigating children. This review yielded limited evidence to support manipulation of medicines for children. The results cannot be extrapolated between dosage forms, methods of manipulation or between different brands of the same

  12. Research studies on in vitro and ex vivo yield of the miconazole nitrate from oral biomucoadhesive tablets.

    Science.gov (United States)

    Birsan, Magdalena; Cojocaru, Ileana; Scutariu, Mihaela Monica; Popovici, Iuliana

    2014-01-01

    Among the various routes of drug administration, the oral mucosa is perhaps the most often preferred by patients and medical staff. However, oral administration of drugs has disadvantages, which may limit or prevent oral administration of some drugs, especially peptides and proteins, little when they are inserted in special administration systems for the colon. The disaggregation of some oral biomucoadhesive tablets and the in vitro yield of the miconazole nitrate was evaluated and in parallel with this, the evaluation of the in vivo yield of the antifungal from the pharmaceutical form. Thus, for a clear determination of the oral mucobioadhesive tablets' disintegration with miconazole nitrate, it was necessary to implement a method to simulate the conditions of the oral cavity at a flow of solution (artificial saliva) similar to that of the human one. miconazole nitrate. The determination of disintegration time according to method A (FRX); the disaggregation of oral biomucoadhesive tablets with miconazole nitrate by means of simulation methods of in vitro conditions; the quantitative determination of the miconazole nitrate by means of HPLC method, after the in vitro dissolution test; the study of miconazole nitrate's yield in dynamic condition from biomucoadhesive tablets in the presence of artificial saliva (AFNOR). The yield profile of the miconazole nitrate in the disintegration solutions by means of classical method from FR X, by HPLC dosage was researched. The release of miconazole nitrate from the oral mucobioadhesive tablets was determined, that varies in time, depending on the type and relation of matrix forming polymers; a low yield speed of the miconazole nitrate from the tablets was determined; the yield profile of miconazole nitrate in disintegration solutions by means of the new suggested method was researched. The release of miconazole nitrate from the formulated biomucoadhesive tablets is of swelling and erosion.

  13. Intravenous voriconazole after toxic oral administration

    NARCIS (Netherlands)

    Alffenaar, J.W.C.; Van Assen, S.; De Monchy, J.G.R.; Uges, D.R.A.; Kosterink, J.G.W.; Van Der Werf, T.S.

    In a male patient with rhinocerebral invasive aspergillosis, prolonged high-dosage oral administration of voriconazole led to hepatotoxicity combined with a severe cutaneous reaction while intravenous administration in the same patient did not. High concentrations in the portal blood precipitate

  14. The Active Metabolite of Warfarin (3'-Hydroxywarfarin) and Correlation with INR, Warfarin and Drug Weekly Dosage in Patients under Oral Anticoagulant Therapy: A Pharmacogenetics Study.

    Science.gov (United States)

    Gemmati, Donato; Burini, Francesco; Talarico, Anna; Fabbri, Matteo; Bertocco, Cesare; Vigliano, Marco; Moratelli, Stefano; Cuneo, Antonio; Serino, Maria Luisa; Avato, Francesco Maria; Tisato, Veronica; Gaudio, Rosa Maria

    2016-01-01

    Warfarin oral anticoagulant therapy (OAT) requires regular and frequent drug adjustment monitored by INR. Interindividual variability, drug and diet interferences, and genetics (VKORC1 and CYP2C9) make the maintenance/reaching of stable INR a not so easy task. HPLC assessment of warfarin/enantiomers was suggested as a valid monitoring-tool along with INR, but definite results are still lacking. We evaluated possible correlations between INR, warfarin/3'-hydroxywarfarin, and drug weekly dosage aimed at searching novel alternatives to OAT monitoring. VKORC1/CYP2C9 pharmacogenetics investigation was performed to account for the known influence on warfarin homeostasis. 133 OAT patients were recruited and assessed for warfarin/3'-hydroxywarfarin serum levels (HPLC), INR, and VKORC1 and CYP2C9 genotypes. A subgroup of 52 patients were monitored in detail (5 consecutive controls; c0-c4) till the target INR was reached. Correlation analyses were performed in both groups. In the whole OAT group both warfarin and 3'-hydroxywarfarin correlate with INR at comparable degree (r2 = 0.0388 and 0.0362 respectively). Conversely, warfarin weekly dosage better correlates with warfarin than with 3'-hydroxywarfarin (r2 = 0.0975 and r2 = 0.0381 respectively), but considering together warfarin plus 3'-hydroxywarfarin the correlation strongly increased (r2 = 0.1114; ppharmacogenetics studies confirmed that patients carrying the VKORC1 variant-allele required lower warfarin maintenance dosage and that the combination of VKORC1 and CYP2C9 yielded a warfarin responsive index (WRI) inversely related to the number variant alleles. Our results overall suggest that 3'-hydroxywarfarin monitoring could be of great advantage in INR monitoring respect to classical warfarin assessment showing significant contribution also in multivariate analysis. Therefore, additional active metabolites should be recognized and investigated as novel useful indicators.

  15. 3D printing of a wearable personalized oral delivery device: A first-in-human study

    Science.gov (United States)

    Brambilla, Davide

    2018-01-01

    Despite the burgeoning interest in three-dimensional (3D) printing for the manufacture of customizable oral dosage formulations, a U.S. Food and Drug Administration–approved tablet notwithstanding, the full potential of 3D printing in pharmaceutical sciences has not been realized. In particular, 3D-printed drug-eluting devices offer the possibility for personalization in terms of shape, size, and architecture, but their clinical applications have remained relatively unexplored. We used 3D printing to manufacture a tailored oral drug delivery device with customizable design and tunable release rates in the form of a mouthguard and, subsequently, evaluated the performance of this system in the native setting in a first-in-human study. Our proof-of-concept work demonstrates the immense potential of 3D printing as a platform for the development and translation of next-generation drug delivery devices for personalized therapy. PMID:29750201

  16. Comparison of nickel and chromium ions released from stainless steel and NiTi wires after immersion in Oral B®, Orthokin® and artificial saliva.

    Science.gov (United States)

    Jamilian, Abdolreza; Moghaddas, Omid; Toopchi, Shabnam; Perillo, Letizia

    2014-07-01

    Oral environment of the mouth is a suitable place for biodegradation of alloys used in orthodontic wires. The toxicity of these alloys namely nickel and chromium has concerned the researchers about the release of these ions from orthodontic wires and brackets. The aim of this study was to measure the levels of nickel and chromium ions released from 0.018" stainless steel (SS) and NiTi wires after immersion in three solutions. One hundred and forty-four round NiTi and 144 round SS archwires with the diameters of 0.018" were immersed in Oral B®, Orthokin® and artificial saliva. The amounts of nickel and chromium ions released were measured after 1, 6, 24 hours and 7 days. Two way repeated ANOVA showed that the amount of chromium and nickel significantly increased in all solutions during all time intervals (p nickel ions were released more in NiTi wire in all solutions compared with SS wire. The lowest increase rate was also seen in artificial saliva. There is general consensus in literature that even very little amounts of nickel and chromium are dangerous for human body specially when absorbed orally; therefore, knowing the precise amount of these ions released from different wires when immersed in different mouthwashes is of high priority.

  17. Pharmacokinetics of an oral extended-release formulation of doxycycline hyclate containing acrylic acid and polymethacrylate in dogs.

    Science.gov (United States)

    Ruiz, Sara Melisa Arciniegas; Olvera, Lilia Gutiérrez; Chacón, Sara del Carmen Caballero; Estrada, Dinorah Vargas

    2015-04-01

    To determine the pharmacokinetics of doxycycline hyclate administered orally in the form of experimental formulations with different proportions of acrylic acid-polymethacrylate-based matrices. 30 healthy adult dogs. In a crossover study, dogs were randomly assigned (in groups of 10) to receive a single oral dose (20 mg/kg) of doxycycline hyclate without excipients (control) or extended-release formulations (ERFs) containing doxycycline, acrylic acid polymer, and polymethacrylate in the following proportions: 1:0.5:0.0075 (ERF1) or 1:1:0.015 (ERF2). Serum concentrations of doxycycline were determined for pharmacokinetic analysis before and at several intervals after each treatment. Following oral administration to the study dogs, each ERF resulted in therapeutic serum doxycycline concentrations for 48 hours, whereas the control treatment resulted in therapeutic serum doxycycline concentrations for only 24 hours. All pharmacokinetic parameters for ERF1 and ERF2 were significantly different; however, findings for ERF1 did not differ significantly from those for the control treatment. Results indicated that both ERFs containing doxycycline, acrylic acid polymer, and polymethacrylate had an adequate pharmacokinetic-pharmacodynamic relationship for a time-dependent drug and a longer release time than doxycycline alone following oral administration in dogs. Given the minimum effective serum doxycycline concentration of 0.26 μg/mL, a dose interval of 48 hours can be achieved for each tested ERF. This minimum inhibitory concentration has the potential to be effective against several susceptible bacteria involved in important infections in dogs. Treatment of dogs with either ERF may have several benefits over treatment with doxycycline alone.

  18. Development and characterization of an atorvastatin solid dispersion formulation using skimmed milk for improved oral bioavailability

    Directory of Open Access Journals (Sweden)

    Ankush Choudhary

    2012-08-01

    Full Text Available Atorvastatin has low aqueous solubility resulting in low oral bioavailability (12% and thus presents a challenge in formulating a suitable dosage form. To improve the aqueous solubility, a solid dispersion formulation of atorvastatin was prepared by lyophilization utilising skimmed milk as a carrier. Six different formulations were prepared with varying ratios of drug and carrier and the corresponding physical mixtures were also prepared. The formation of a solid dispersion formulation was confirmed by differential scanning calorimetry and X-ray diffraction studies. The optimum drug-to-carrier ratio of 1:9 enhanced solubility nearly 33-fold as compared to pure drug. In vitro drug release studies exhibited a cumulative release of 83.69% as compared to 22.7% for the pure drug. Additionally, scanning electron microscopy studies suggested the conversion of crystalline atorvastatin to an amorphous form. In a Triton-induced hyperlipidemia model, a 3-fold increase in the lipid lowering potential was obtained with the reformulated drug as compared to pure drug. These results suggest that solid dispersion of atorvastatin using skimmed milk as carrier is a promising approach for oral delivery of atorvastatin.

  19. Risk based In Vitro Performance Assessment of Extended Release Abuse Deterrent Formulations

    Science.gov (United States)

    Xu, Xiaoming; Gupta, Abhay; Al-Ghabeish, Manar; Calderon, Silvia N.; Khan, Mansoor A.

    2016-01-01

    High strength extended release opioid products, which are indispensable tools in the management of pain, are associated with serious risks of unintentional and potentially fatal overdose, as well as of misuse and abuse that might lead to addiction. The issue of drug abuse becomes increasingly prominent when the dosage forms can be readily manipulated to release a high amount of opioid or to extract the drug in certain products or solvents. One approach to deter opioid drug abuse is by providing novel abuse deterrent formulations (ADF), with properties that may be viewed as barriers to abuse of the product. However, unlike regular extended release formulations, assessment of ADF technologies are challenging, in part due to the great variety of formulation designs available to achieve deterrence of abuse by oral, parenteral, nasal and respiratory routes. With limited prior history or literature information, and lack of compendial standards, evaluation and regulatory approval of these novel drug products become increasingly difficult. The present article describes a risk-based standardized in-vitro approach that can be utilized in general evaluation of abuse deterrent features for all ADF products. PMID:26784976

  20. DEVELOPMENT OF SUSTAINED RELEASE TABLETS ...

    African Journals Online (AJOL)

    2013-12-31

    Dec 31, 2013 ... The SR dosage forms that release drugs pH independently in .... were determined; Post compression parameters such as weight variation test, hardness, ... Based on the ICH guidelines 12, the stability studies were carried out ...

  1. Calcitonin gene-related peptide and somatostatin releases correlated with the area under the lafutidine concentration-time curve in human plasma.

    Science.gov (United States)

    Ikawa, K; Shimatani, T; Azuma, Y; Inoue, M; Morikawa, N

    2006-08-01

    To examine the effects of the histamine H(2)-receptor antagonist, lafutidine, at clinical dosage (10 mg tablet after a standardized meal) on plasma levels of the gastrointestinal peptides, calcitonin gene-related peptide (CGRP), somatostatin and gastrin. Six healthy male volunteers ate a standardized meal, and received either lafutidine orally at a dose of 10 mg or water only (control). Blood samples were taken before and up to 4 h after the drug administration. Plasma lafutidine concentrations were determined by high pressure liquid chromatography. Pharmacokinetic analysis of lafutidine was performed using one-compartmental model. The levels of immunoreactive substances of plasma CGRP, somatostatin and gastrin were measured by enzyme immunoassay, and the amount of peptide release was calculated by the trapezoidal method. Lafutidine significantly increased plasma CGRP levels at 1, 1.5, 2.5 and 4 h and the total amount of CGRP release (192 +/- 14.0 pg.h/mL) compared with the control group (128 +/- 21.5 pg.h/mL). Lafutidine significantly increased the plasma somatostatin levels at 1 and 1.5 h, and the total amount of somatostatin released (107 +/- 18.2 pg.h/mL) compared with the control (78.4 +/- 7.70 pg.h/mL). The area under the drug concentration-time curve (AUC) from 0 to 4 h after administration correlated well with the Delta-CGRP and Delta-somatostatin release but not with total amount of gastrin released. However, plasma gastrin levels were significantly elevated at 1.5 h after drug administration. Lafutidine at clinical dosage increases plasma CGRP and the somatostatin. The amounts released correlated with the AUC of lafutidine in humans. These results suggest that the increased release of CGRP and somatostatin may contribute to its gastroprotective and anti-acid secretory effect.

  2. An oral multi-particulate, modified release, hydrocortisone replacement therapy that provides physiological cortisol exposure

    Science.gov (United States)

    Huatan, Hiep; Merke, Deborah; Arlt, Wiebke; Ross, Richard J.

    2013-01-01

    Objective It is not possible with current hydrocortisone replacement to mimic the diurnal cortisol profile in patients with adrenal insufficiency. Previous attempts with modified release technology were unsuccessful. Our objective was to develop hydrocortisone formulations that recreate the diurnal cortisol profile using multi-particulate technology. Design and Measurements Screening by in-vitro dissolution profiles, pharmacokinetic testing in dexamethasone suppressed dogs and humans, and comparison to a reference population. Setting Field laboratories and clinical research facility. Results Formulations were generated using an enteric (delayed-release) design configuration with an extended (sustained-release) dissolution profile. In-vitro dissolution confirmed delayed and sustained hydrocortisone release. However, in dogs and humans, sustained release resulted in reduced bioavailability. A formulation, DIURF-006, was developed that maintained delayed release but omitted the sustained release functionality. Pharmacokinetic characterisation of DIURF-006 showed that, despite absence of a sustained release component, absorption was sufficiently sustained to deliver extended hydrocortisone absorption. In dexamethasone-suppressed volunteers (n=16) receiving a twice daily ‘toothbrush’ regimen (20mg at 23:00h and 10mg at 07:00h), DIURF-006 gave a similar cortisol profile to physiological cortisol levels: DIURF-006 vs physiological, Geomean AUC 5610 vs 4706 hr*nmol/l, Geomean Cmax 665 vs 594 nmol/l and Median Tmax 8.5h vs clock time 08:12 hours for peak cortisol. The relative bioavailability of DIURF-006 vs hydrocortisone was 89% and cortisol levels increased linearly with doses between 5 and 30mg. Conclusion A multi-particulate oral hydrocortisone formulation with only an enteric coat provides delayed and sustained absorption and when given in a ‘toothbrush’ regimen provides physiological cortisol exposure. PMID:23980724

  3. Dropwise additive manufacturing of pharmaceutical products for solvent-based dosage forms.

    Science.gov (United States)

    Hirshfield, Laura; Giridhar, Arun; Taylor, Lynne S; Harris, Michael T; Reklaitis, Gintaras V

    2014-02-01

    In recent years, the US Food and Drug Administration has encouraged pharmaceutical companies to develop more innovative and efficient manufacturing methods with improved online monitoring and control. Mini-manufacturing of medicine is one such method enabling the creation of individualized product forms for each patient. This work presents dropwise additive manufacturing of pharmaceutical products (DAMPP), an automated, controlled mini-manufacturing method that deposits active pharmaceutical ingredients (APIs) directly onto edible substrates using drop-on-demand (DoD) inkjet printing technology. The use of DoD technology allows for precise control over the material properties, drug solid state form, drop size, and drop dynamics and can be beneficial in the creation of high-potency drug forms, combination drugs with multiple APIs or individualized medicine products tailored to a specific patient. In this work, DAMPP was used to create dosage forms from solvent-based formulations consisting of API, polymer, and solvent carrier. The forms were then analyzed to determine the reproducibility of creating an on-target dosage form, the morphology of the API of the final form and the dissolution behavior of the drug over time. DAMPP is found to be a viable alternative to traditional mass-manufacturing methods for solvent-based oral dosage forms. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  4. Sustained release of a novel anti-quorum-sensing agent against oral fungal biofilms.

    Science.gov (United States)

    Feldman, Mark; Shenderovich, Julia; Al-Quntar, Abed Al Aziz; Friedman, Michael; Steinberg, Doron

    2015-04-01

    Thiazolidinedione-8 (S-8) has recently been identified as a potential anti-quorum-sensing/antibiofilm agent against bacteria and fungi. Based on these results, we investigated the possibility of incorporating S-8 in a sustained-release membrane (SRM) to increase its pharmaceutical potential against Candida albicans biofilm. We demonstrated that SRM containing S-8 inhibits fungal biofilm formation in a time-dependent manner for 72 h, due to prolonged release of S-8. Moreover, the SRM effectively delivered the agent in its active form to locations outside the membrane reservoir. In addition, eradication of mature biofilm by the SRM containing S-8 was also significant. Of note, S-8-containing SRM affected the characteristics of mature C. albicans biofilm, such as thickness, exopolysaccharide (EPS) production, and morphogenesis of fungal cells. The concept of using an antibiofilm agent with no antifungal activity incorporated into a sustained-release delivery system is new in medicine and dentistry. This concept of an SRM containing a quorum-sensing quencher with an antibiofilm effect could pave the way for combating oral fungal infectious diseases. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  5. 21 CFR 520.2260c - Sulfamethazine sustained-release tablets.

    Science.gov (United States)

    2010-04-01

    ... response within 2 to 3 days, reevaluate therapy. Do not crush tablets. Treated animals must not be... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520...

  6. Formulation and evaluation of gastroretentive microballoons containing baclofen for a floating oral controlled drug delivery system.

    Science.gov (United States)

    Dube, T S; Ranpise, N S; Ranade, A N

    2014-01-01

    The objective of the present study was to fabricate and evaluate a multiparticulate oral gastroretentive dosage form of baclofen characterized by a central large cavity (hollow core) promoting unmitigated floatation with practical applications to alleviate the signs and symptoms of spasticity and muscular rigidity. Solvent diffusion and evaporation procedure were applied to prepare floating microspheres with a central large cavity using various combinations of ethylcellulose (release retardant) and HPMC K4M (release modifier) dissolved in a mixture of dichloromethane and methanol (2:1). The obtained microspheres (700-1000 µm) exhibit excellent floating ability (86 ± 2.00%) and release characteristics with entrapment efficiency of 95.2 ± 0.32%. Microspheres fabricated with ethylcellulose to HPMC K4M in the ratio 8.5:1.5 released 98.67% of the entrapped drug in 12 h. Muscle relaxation caused by baclofen microspheres impairs the rotarod performance for more than 12 h. Abdominal X-ray images showed that the gastroretention period of the floating barium sulfate- labeled microspheres was no less than 10 h. The buoyant baclofen microspheres provide a promising gastroretentive drug delivery system to deliver baclofen in spastic patients with a sustained release rate.

  7. Mucoadhesive oral films: The potential for unmet needs.

    Science.gov (United States)

    Silva, Branca M A; Borges, Ana Filipa; Silva, Cláudia; Coelho, Jorge F J; Simões, Sérgio

    2015-10-15

    Oral drug delivery is the most common route of drug administration. Nevertheless, there are some important limitations that reinforce the need for developing new drug delivery systems. Mucoadhesive oral films (MOF) are promising dosage forms that adhere to the oral mucosa and deliver the drug through it, which present several advantages. These include: bypassing the hepatic first pass effect, fast onset of action, ease of transportation and handling. The use of such dosage form is beneficial for drugs that have poor oral bioavailability and also for drugs that need to be rapidly absorbed. In spite of the known benefits, the number of marketed MOF is still quite small. This review explores the products under development and corresponding clinical trials in respect to their status, therapeutic indication, companies involved and technologies. In this way, it was possible to identify the preferred therapeutic indications, new research and market trends as well as future prospects of MOF. Moreover, it is reasonable to expect an increase in the number of products on the market due to their great potential to satisfy unmet medical needs. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Permeability enhancers dramatically increase zanamivir absolute bioavailability in rats: implications for an orally bioavailable influenza treatment.

    Directory of Open Access Journals (Sweden)

    Eric H Holmes

    Full Text Available We have demonstrated that simple formulations composed of the parent drug in combination with generally regarded as safe (GRAS permeability enhancers are capable of dramatically increasing the absolute bioavailability of zanamivir. This has the advantage of not requiring modification of the drug structure to promote absorption, thus reducing the regulatory challenges involved in conversion of an inhaled to oral route of administration of an approved drug. Absolute bioavailability increases of up to 24-fold were observed when Capmul MCM L8 (composed of mono- and diglycerides of caprylic/capric acids in glycerol was mixed with 1.5 mg of zanamivir and administered intraduodenally to rats. Rapid uptake (t(max of 5 min and a C(max of over 7200 ng/mL was achieved. Variation of the drug load or amount of enhancer demonstrated a generally linear variation in absorption, indicating an ability to optimize a formulation for a desired outcome such as a targeted C(max for enzyme saturation. No absorption enhancement was observed when the enhancer was given 2 hr prior to drug administration, indicating, in combination with the observed tmax, that absorption enhancement is temporary. This property is significant and aligns well with therapeutic applications to limit undesirable drug-drug interactions, potentially due to the presence of other poorly absorbed polar drugs. These results suggest that optimal human oral dosage forms of zanamivir should be enteric-coated gelcaps or softgels for intraduodenal release. There continues to be a strong need and market for multiple neuraminidase inhibitors for influenza treatment. Creation of orally available formulations of inhibitor drugs that are currently administered intravenously or by inhalation would provide a significant improvement in treatment of influenza. The very simple GRAS formulation components and anticipated dosage forms would require low manufacturing costs and yield enhanced convenience. These results

  9. Prolonged-release melatonin versus placebo for benzodiazepine discontinuation in patients with schizophrenia or bipolar disorder

    DEFF Research Database (Denmark)

    Baandrup, Lone; Lindschou, Jane; Winkel, Per

    2016-01-01

    OBJECTIVES: We assessed if prolonged-release melatonin can facilitate withdrawal of long-term benzodiazepine usage in patients with schizophrenia or bipolar disorder. METHODS: Randomised, placebo-controlled, blinded, parallel superiority trial of 24 weeks duration. Participants were randomised...... to prolonged-release melatonin 2 mg daily versus matching placebo and were continuously guided to gradually reduce their usual benzodiazepine dosage. The primary outcome was mean benzodiazepine daily dosage at 24 weeks. Secondary outcomes included pattern of benzodiazepine dosage over time, benzodiazepine...... cessation proportion, and benzodiazepine withdrawal symptoms. RESULTS: In total, 86 patients (21-74 years) were enrolled: 42 were randomised to melatonin versus 44 to placebo. We found no significant effect of melatonin on mean benzodiazepine dosage at 24 weeks (melatonin group 8.01 mg versus placebo group...

  10. Physiological parameters for oral delivery and in vitro testing.

    Science.gov (United States)

    Mudie, Deanna M; Amidon, Gordon L; Amidon, Gregory E

    2010-10-04

    Pharmaceutical solid oral dosage forms must undergo dissolution in the intestinal fluids of the gastrointestinal tract before they can be absorbed and reach the systemic circulation. Therefore, dissolution is a critical part of the drug-delivery process. The rate and extent of drug dissolution and absorption depend on the characteristics of the active ingredient as well as properties of the dosage form. Just as importantly, characteristics of the physiological environment such as buffer species, pH, bile salts, gastric emptying rate, intestinal motility, and hydrodynamics can significantly impact dissolution and absorption. While significant progress has been made since 1970 when the first compendial dissolution test was introduced (USP apparatus 1), current dissolution testing does not take full advantage of the extensive physiologic information that is available. For quality control purposes, where the question is one of lot-to-lot consistency in performance, using nonphysiologic test conditions that match drug and dosage form properties with practical dissolution media and apparatus may be appropriate. However, where in vitro-in vivo correlations are desired, it is logical to consider and utilize knowledge of the in vivo condition. This publication critically reviews the literature that is relevant to oral human drug delivery. Physiologically relevant information must serve as a basis for the design of dissolution test methods and systems that are more representative of the human condition. As in vitro methods advance in their physiological relevance, better in vitro-in vivo correlations will be possible. This will, in turn, lead to in vitro systems that can be utilized to more effectively design dosage forms that have improved and more consistent oral bioperformance.

  11. In vivo evaluation of dosage forms: application of gamma scintigraphy to non-enteral routes of administration.

    Science.gov (United States)

    Meseguer, G; Gurny, R; Buri, P

    1994-01-01

    The trend to deliver drugs to defined areas of the body involves sophisticated carriers systems. In addition to the in vitro drug release profile one must be aware of the in vivo behaviour of the dosage form and the drug. Gamma scintigraphy is an elegant way to gain insights of the actual in vivo distribution pattern of dosage forms. This technique relies on the use of radioactive tracers included into the medicament and selected so as to enable an optimum detection by a gamma ray camera. The choice of a convenient label enables the in vivo determination of the targeting of the formulation administered through a large number of routes. The present paper reviews applications of gamma scintigraphy for the evaluation of dosage forms administered by the parenteral, rectal, buccal, nasal, pulmonary, and ophthalmic routes.

  12. Preparation and pharmaceutical evaluation of glibenclamide slow release mucoadhesive buccal film

    Science.gov (United States)

    Bahri-Najafi, R.; Tavakoli, N.; Senemar, M.; Peikanpour, M.

    2014-01-01

    Buccal mucoadhesive systems among novel drug delivery systems have attracted great attention in recent years due to their ability to adhere and remain on the oral mucosa and to release their drug content gradually. Buccal mucoadhesive films can improve the drug therapeutic effect by enhancement of drug absorption through oral mucosa increasing the drug bioavailability via reducing the hepatic first pass effect. The aim of the current study was to formulate the drug as buccal bioadhesive film, which releases the drug at sufficient concentration with a sustain manner reducing the frequency of the dosage form administration. One of the advantagees of this formulation is better patient compliances due to the ease of administration with no water to swallow the product. The mucoadhesive films of glibenclamide were prepared using hydroxypropyl methylcellulose (HPMC) K4M, K15M and Eudragit RL100 polymers and propylene glycol as plasticizer and co-solvent. Films were prepared using solvent casting method, and were evaluated with regard to drug content, thickness, weight variations, swelling index, tensile strength, ex vivo adhesion force and percentage of in vitro drug release. Films with high concentrations of HPMC K4M and K15M did not have favorable appearance and uniformity. The formulations prepared from Eudragit were transparent, uniform, flexible, and without bubble. The highest and the lowest percentages of swelling were observed for the films containing HPMC K15M and Eudragit RL100, respectively. Films made of HPMC K15M had adhesion force higher than those containing Eudragit RL100. Formulations with Eudragit RL100 showed the highest mean dissolution time (MDT). Drug release kinetics of all formulations followed Higuchi's model and the mechanism of diffusion was considered non-Fickian type. It was concluded that formulations containing Eudragit RL100 were more favorable than others with regard to uniformity, flexibility, rate and percentage of drug release. PMID

  13. Aminoclay–lipid hybrid composite as a novel drug carrier of fenofibrate for the enhancement of drug release and oral absorption

    Directory of Open Access Journals (Sweden)

    Yang L

    2016-03-01

    Full Text Available Liang Yang, Yating Shao, Hyo-Kyung Han BK Plus Project Team, College of Pharmacy, Dongguk University, Goyang, South Korea Abstract: This study aimed to prepare the aminoclay–lipid hybrid composite to enhance the drug release and improve the oral bioavailability of poorly water-soluble fenofibrate. Antisolvent precipitation coupled with an immediate freeze-drying method was adopted to incorporate fenofibrate into aminoclay–lipid hybrid composite (ALC. The optimal composition of the ALC formulation was determined as the ratios of aminoclay to krill oil of 3:1 (w/w, krill oil to fenofibrate of 2:1 (w/w, and antisolvent to solvent of 6:4 (v/v. The morphological characteristics of ALC formulation were determined using scanning electron microscopy, differential scanning calorimetry, and X-ray powder diffraction, which indicated microcrystalline state of fenofibrate in ALC formulation. The ALC formulation achieved almost complete dissolution within 30 minutes, whereas the untreated powder and physical mixture exhibited less than 15% drug release. Furthermore, ALC formulation effectively increased the peak plasma concentration (Cmax and area under the curve (AUC of fenofibric acid (an active metabolite in rats by approximately 13- and seven-fold, respectively. Furthermore, ALC formulation exhibited much lower moisture sorption behavior than the lyophilized formulation using sucrose as a cryoprotectant. Taken together, the present findings suggest that ALC formulation is promising for improving the oral absorption of poorly soluble fenofibrate. Keywords: aminoclay, omega-3 phospholipids, fenofibrate, drug release, oral absorption 

  14. Intra-oral cone radiation therapy for selected carcinomas of the oral cavity

    International Nuclear Information System (INIS)

    Wang, C.C.; Doppke, K.P.; Biggs, P.J.

    1983-01-01

    A study of 101 patients with early carcinomas of the oral cavity, T1 and T2, treated by external cobalt 60 beam and/or intra-oral cone (IOC) radiation therapy between 1964 through 1980 was made. The two year disease-free survival rate, including surgical salvage, was 88% and the local control rate was 85%. The incidence of radiation complications, i.e., soft tissue ulceration and/or osteoradionecrosis, was 14% and varied with various tumor sites and radiation doses delivered. The present review shows that local control and radiation complications are closely related to radiation doses and varies with different tumor sites of the oral cavity. Radiation therapy dosages expressed in terms of TDF values for these lesions are herein recommended. With proper selections of lesions arising from the oral cavity, combined external beam and IOC radiation therapy has been found extremely efficacious in achieving good local tumor control and high survival rates with excellent cosmetic and functional results and minimum radiation sequalae

  15. pH-independent release of propranolol hydrochloride from HPMC-based matrices using organic acids

    Directory of Open Access Journals (Sweden)

    2008-08-01

    Full Text Available Background and purpose of the study: Propranolol HCl, a widely used drug in the treatment of cardiac arrhythmias and hypertension, is a weak basic drug with pH-dependent solubility that may show release problems from sustained release dosage forms at higher pH of small intestine. This might decrease drug bioavailability and cause variable oral absorption. Preparation of a sustained release matrix system with a pH-independent release profile was the aim of the present study. Methods: Three types of organic acids namely tartaric, citric and fumaric acid in the concentrations of 5, 10 and 15 % were added to the matrices prepared by hydroxypropyl methylcellulose (HPMC and dicalcium phosphate. The drug release studies were carried out at pH 1.2 and pH 6.8 separately and mean dissolution time (MDT as well as similarity factor (¦2 were calculated for all formulations. Results and discussion: It was found that incorporation of 5 and 10 % tartaric acid in tablet formulations with 30 % HPMC resulted in a suitable pH-independent release profiles with significant higher ¦2 values (89.9 and 87.6 respectively compared to acid free tablet (58.03. The other two acids did not show the desirable effects. It seems that lower pKa of tartaric acid accompanied by its higher solubility were the main factors in the achievement of pH-independent release profiles.

  16. Oral versus topical propranolol for management of superficial ...

    African Journals Online (AJOL)

    was treated with oral propranolol and group B (n = 24) was treated with propranolol .... months during treatment, or if any undesirable drawbacks .... dosage and the serum concentration of the drug in this route [29]. However, McMahon et al.

  17. Comparative pharmacokinetic study of dosage forms with morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate

    Directory of Open Access Journals (Sweden)

    I. V. Bushueva

    2014-12-01

    Full Text Available Using mathematical models of income distribution and excretion of drugs greatly enhances the interpretation of the results of biopharmaceutical research. Pharmacokinetic modeling makes it possible to quantify the biological assessment of pharmaceutical factors, opens the possibility of a science-based regulation of the kinetics of substances introduced through targeted changesof pharmaceutical factors. Results of the study of kinetic models are used to solve some practical problems associated with pharmacological and clinical trials of medicines. Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate is new organic compound from the 1,2,4-triazole group obtained at the Department of Inorganic Chemistry, Zaporozhye State Medical University. The substance has antioxidant and anti-ischemic action, low toxicity. Aim of this work is to study the kinetics of absorption of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate developed formulations. MATERIALS AND METHODS Pharmacokinetic studies of oral and rectal dosage forms of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate was performed on Chinchilla rabbits weighing an average of 2.5 kg, divided into three groups. The third group for comparison was administered a 1% injectable solution of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate intravenously. Substance dose was 0.1 g and 0.5 g per kg of animal body weight, which were administered once. Sampling from the auricular vein of the rabbits was performed at 5, 10, 15, 30, 45, 60, 75, 90, 120, 150 and 180 minutes after oral administration and rectal dosage forms of morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate and after 3, 5, 10, 15, 20, 30, 40, 50 and 60 minutes after intravenous injection. Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio] acetate concentration in serum was adjusted spectrophotometrically. Results.Morpholinium 2-[5-(pyridin-4-yl-1,2,4-triazol-3-ylthio

  18. Piracetam relieves symptoms in progressive myoclonus epilepsy: a multicentre, randomised, double blind, crossover study comparing the efficacy and safety of three dosages of oral piracetam with placebo

    Science.gov (United States)

    Koskiniemi, M.; Van Vleymen, B.; Hakamies, L.; Lamusuo, S.; Taalas, J.

    1998-01-01

    OBJECTIVE—To compare the efficacy, tolerability, and safety of three daily dosage regimens of oral piracetam in patients with progressive myoclonus epilepsy.
METHODS—Twenty patients (12 men, eight women), aged 17-43 years, with classical Unverricht-Lundborg disease were enrolled in a multicentre, randomised, double blind trial of crossover design in which the effects of daily doses of 9.6 g, 16.8 g, and 24 g piracetam, given in two divided doses, were compared with placebo. The crossover design was such that patients received placebo and two of the three dosage regimens of piracetam, each for two weeks, for a total treatment period of six weeks and thus without wash out between each treatment phase. The primary outcome measure was a sum score representing the adjusted total of the ratings of six components of a myoclonus rating scale in which stimulus sensitivity, motor impairment, functional disability, handwriting, and global assessments by investigators and patients were scored. Sequential clinical assessments were made by the same neurologist in the same environment at the same time of day.
RESULTS—Treatment with 24 g/day piracetam produced significant and clinically relevant improvement in the primary outcome measure of mean sum score (p=0.005) and in the means of its subtests of motor impairment (p=0.02), functional disability (p=0.003), and in global assessments by both investigator (p=0.002) and patient (p=0.01). Significant improvement in functional disability was also found with daily doses of 9.6 g and 16.8 g. The dose-effect relation was linear and significant. More patients showed clinically relevant improvement with the highest dosage and, in individual patients, increasing the dose improved response. Piracetam was well tolerated and adverse effects were few, mild, and transient.
CONCLUSIONS—This study provides further evidence that piracetam is an effective and safe medication in patients with Unverricht-Lundborg disease. In addition

  19. Cardiovascular safety of the oral controlled absorption system (OCAS) formulation of tamsulosin compared to the modified release (MR) formulation

    NARCIS (Netherlands)

    Michel, M. C.; Korstanje, C.; Klauwinkel, W.; Shear, M.; Davies, J.; Quartel, A.

    2005-01-01

    Objective: The potential to interfere with efferent adrenergic drive in the cardiovascular system was tested in elderly healthy subjects for the new oral controlled absorption system (OCAS) 0.4 mg tablet formulation of tamsulosin compared to the modified release (MR) 0.4 mg capsule formulation of

  20. Biowaiver monographs for immediate release solid oral dosage forms: acetaminophen (paracetamol).

    NARCIS (Netherlands)

    Kalantzi, L; Reppas, C; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Shah, V P; Stavchansky, S A; Barends, Dirk M

    2006-01-01

    Literature data are reviewed on the properties of acetaminophen (paracetamol) related to the biopharmaceutics classification system (BCS). According to the current BCS criteria, acetaminophen is BCS Class III compound. Differences in composition seldom, if ever, have an effect on the extent of

  1. Design and characteristics of gellan gum beads for modified release of meloxicam.

    Science.gov (United States)

    Osmałek, Tomasz; Milanowski, Bartłomiej; Froelich, Anna; Szybowicz, Mirosław; Białowąs, Wojciech; Kapela, Marcin; Gadziński, Piotr; Ancukiewicz, Katarzyna

    2017-08-01

    The aim of the presented work was to design, formulate and evaluate the properties of low-acyl gellan macro beads with the potential application as carriers for oral delivery of meloxicam (MLX) in the prophylaxis of colorectal cancer. The beads were obtained by means of ionotropic gelation technique. Calcium chloride (1.0%, 9.0 × 10 -2  M) was used as the cross-linking agent. Nine different polymer, drug and surfactant (Tween ® 80) mixtures were used for production of the beads. The quantitative compositions of the mixtures were generated with the application of the Design of Experiments (DoE) modulus from the STATISTICA Software. The prepared formulations revealed 7.2-27.0% of drug loading and 29.2-50.7% drug encapsulation efficiency. It turned out that 0.5% amount of gellan gum in the mixtures was not sufficient to obtain spherical beads. The morphology and surface of the dried beads were analyzed by SEM. Raman spectra confirmed that MLX did not undergo structural changes during production of the beads. The swelling behavior and degradation of the beads were evaluated in three simulated gastrointestinal fluids at different pH (1.2; 4.5; 6.8). The MLX in vitro release studies were conducted on USP apparatus IV, working in the open loop mode. The obtained results showed that MLX release from the dried beads was pH-dependent. The formulations obtained from mixtures containing 1.0 and 1.5% of gellan may be considered as oral dosage forms for MLX, intended to omit the stomach and release the drug in the distal parts of the gastrointestinal tract.

  2. Screening computer-assisted dosage programs for anticoagulation with warfarin and other vitamin K antagonists: minimum safety requirements for individual programs

    DEFF Research Database (Denmark)

    Poller, L; Roberts, C; Ibrahim, S

    2009-01-01

    Based on the results of the previous European Action on Anticoagulation (EAA) multicenter study, a simplified minimum procedure is described for screening the safety and effectiveness of marketed programs for dosage of oral anticoagulant drugs (vitamin K antagonists). The aim was to demonstrate non...

  3. Enhancement of bioavailability of ketoprofen using dry elixir as a novel dosage form.

    Science.gov (United States)

    Ahn, H J; Kim, K M; Kim, C K

    1998-07-01

    To enhance the dissolution rate and bioavailability of poorly water-soluble ketoprofen, a novel oral dosage form of ketoprofen, termed ketoprofen dry elixir, was developed by the spray-drying technique. Ketoprofen, dextrin, and sodium lauryl sulfate were dissolved in an ethanol-water mixture (20:25 w/w) and thereafter spray-dried to form the ketoprofen dry elixir. Comparative studies on the in vitro dissolution and in vivo adsorption of ketoprofen in the form of dry elixir and powder were carried out. Ketoprofen in the dry elixir completely dissolved within 5 min. On the other hand, only about 50.1% of ketoprofen powder alone dissolved during 60 min. The initial dissolution rate of ketoprofen in the dry elixir markedly increased in distilled water at 37 degrees C, becoming fourfold higher than that of ketoprofen powder alone. The maximal plasma concentration of ketoprofen (Cmax) and the area under the concentration-time curve from zero to 8 hr (AUC0-8 hr) after the oral administration of dry elixir increased about 3.2- (24.6 versus 7.6 micrograms/ml) and 2.2-(38.4 versus 17.3 micrograms hr/ml) fold compared with powder alone. It was obvious that ketoprofen dry elixir might be a useful solid dosage form to improve the dissolution rate and bioavailability of poorly water-soluble ketoprofen.

  4. Application of Physiologically Based Absorption Modeling to Characterize the Pharmacokinetic Profiles of Oral Extended Release Methylphenidate Products in Adults.

    Directory of Open Access Journals (Sweden)

    Xiaoxia Yang

    Full Text Available A previously presented physiologically-based pharmacokinetic model for immediate release (IR methylphenidate (MPH was extended to characterize the pharmacokinetic behaviors of oral extended release (ER MPH formulations in adults for the first time. Information on the anatomy and physiology of the gastrointestinal (GI tract, together with the biopharmaceutical properties of MPH, was integrated into the original model, with model parameters representing hepatic metabolism and intestinal non-specific loss recalibrated against in vitro and in vivo kinetic data sets with IR MPH. A Weibull function was implemented to describe the dissolution of different ER formulations. A variety of mathematical functions can be utilized to account for the engineered release/dissolution technologies to achieve better model performance. The physiological absorption model tracked well the plasma concentration profiles in adults receiving a multilayer-release MPH formulation or Metadate CD, while some degree of discrepancy was observed between predicted and observed plasma concentration profiles for Ritalin LA and Medikinet Retard. A local sensitivity analysis demonstrated that model parameters associated with the GI tract significantly influenced model predicted plasma MPH concentrations, albeit to varying degrees, suggesting the importance of better understanding the GI tract physiology, along with the intestinal non-specific loss of MPH. The model provides a quantitative tool to predict the biphasic plasma time course data for ER MPH, helping elucidate factors responsible for the diverse plasma MPH concentration profiles following oral dosing of different ER formulations.

  5. Diagnostic value of scratch-chamber test, skin prick test, histamine release and specific IgE in birch-allergic patients with oral allergy syndrome to apple

    DEFF Research Database (Denmark)

    Osterballe, M; Scheller, R; Stahl Skov, P

    2003-01-01

    BACKGROUND: The aim of the study was to examine the diagnostic value of skin prick test (SPT), scratch-chamber test (SCT), histamine release (HR) and specific immunoglobulin E (IgE) in birch-allergic patients with oral allergy syndrome to apple. METHODS: Ten birch-allergic patients with oral...... a detailed case history about symptoms of oral allergy syndrome combined with a SPT with fresh apple peel or A72 will be useful....

  6. An oral modified-release nifedipine tablet (Adalat LA) and its appearance on double contrast barium enema

    International Nuclear Information System (INIS)

    Bleehen, Robert E.

    2000-01-01

    Adalat LA 30 mg and 60 mg tablets are widely prescribed oral modified release nifedipine preparations with a porous, non-digestible plastic tablet coating which is required in order to effect the osmotically driven slow release mechanism. These tablets may therefore be seen anywhere along the gastrointestinal tract and are passed apparently whole in the faeces. An example of the appearance within the rectum of Adalat LA 30 (Bayer) on double contrast barium enema is shown and the main features described. A review of the literature is given. Recognition of the appearances during the barium enema examination will prompt those performing the procedure to question the drug history where relevant and will reduce the incidence of false-positive reporting. Bleehen, R.E. (2000)

  7. Chitosan microparticles: influence of the gelation process on the release profile and oral bioavailability of albendazole, a class II compound.

    Science.gov (United States)

    Piccirilli, Gisela N; García, Agustina; Leonardi, Darío; Mamprin, María E; Bolmaro, Raúl E; Salomón, Claudio J; Lamas, María C

    2014-11-01

    Encapsulation of albendazole, a class II compound, into polymeric microparticles based on chitosan-sodium lauryl sulfate was investigated as a strategy to improve drug dissolution and oral bioavailability. The microparticles were prepared by spray drying technique and further characterized by means of X-ray powder diffractometry, infrared spectroscopy and scanning electron microscopy. The formation of a novel polymeric structure between chitosan and sodium lauryl sulfate, after the internal or external gelation process, was observed by infrared spectroscopy. The efficiency of encapsulation was found to be between 60 and 85% depending on the internal or external gelation process. Almost spherically spray dried microparticles were observed using scanning electron microscopy. In vitro dissolution results indicated that the microparticles prepared by internal gelation released 8% of the drug within 30 min, while the microparticles prepared by external gelation released 67% within 30 min. It was observed that the AUC and Cmax values of ABZ from microparticles were greatly improved, in comparison with the non-encapsulated drug. In conclusion, the release properties and oral bioavailability of albendazole were greatly improved by using spraydried chitosan-sodium lauryl sulphate microparticles.

  8. Endotoxin dosage in sepsis

    Directory of Open Access Journals (Sweden)

    Vincenzo Rondinelli

    2012-03-01

    Full Text Available Introduction. Endotoxin, a component of the cell wall of Gram-negative bacteria is a major contributor to the pathogenesis of septic shock and multiple organ failure (MOF. Its entry into the bloodstream stimulates monocytes/macrophages which once activated produce and release cytokines, nitric oxide and other mediators that induce systemic inflammation, endothelial damage, organ dysfunction, hypotension (shock and MOF.The aim of this study is to evaluate the usefulness of a quantitative test for the dosage of endotoxin to determine the risk of severe Gram-negative sepsis. Materials and methods. In the period January 2009 - June 2011 we performed 897 tests for 765 patients, mostly coming from the emergency room and intensive care, of which 328 (43% women (mean age 53 and 437 (57% male (mean age 49. Fifty-nine patients, no statistically significant difference in sex, were monitored by an average of two determinations of EA.All patients had procalcitonin values significantly altered.The kit used was EAA (Endotoxin Activity Assay Estor Company, Milan, which has three ranges of endotoxin activity (EA: low risk of sepsis if <0.40 units, medium if between 0.40 and 0.59; high if 0.60. Results. 78 out of 765 patients (10% had a low risk, 447 (58% a medium risk and 240 (32% a high risk.The dosage of EA, combined with that of procalcitonin, has allowed a more targeted antibiotic therapy. Six patients in serious clinical conditions were treated by direct hemoperfusion with Toraymyxin, a device comprising a housing containing a fiber polypropylene and polystyrene with surface-bound polymyxin B, an antibiotic that removes bacterial endotoxins from the blood. Conclusions.The test is useful in risk stratification as well as Gram negative sepsis, to set and monitor targeted therapies, also based on the neutralization of endotoxin.

  9. Prediction of dosage-based parameters from the puff dispersion of airborne materials in urban environments using the CFD-RANS methodology

    Science.gov (United States)

    Efthimiou, G. C.; Andronopoulos, S.; Bartzis, J. G.

    2018-02-01

    One of the key issues of recent research on the dispersion inside complex urban environments is the ability to predict dosage-based parameters from the puff release of an airborne material from a point source in the atmospheric boundary layer inside the built-up area. The present work addresses the question of whether the computational fluid dynamics (CFD)-Reynolds-averaged Navier-Stokes (RANS) methodology can be used to predict ensemble-average dosage-based parameters that are related with the puff dispersion. RANS simulations with the ADREA-HF code were, therefore, performed, where a single puff was released in each case. The present method is validated against the data sets from two wind-tunnel experiments. In each experiment, more than 200 puffs were released from which ensemble-averaged dosage-based parameters were calculated and compared to the model's predictions. The performance of the model was evaluated using scatter plots and three validation metrics: fractional bias, normalized mean square error, and factor of two. The model presented a better performance for the temporal parameters (i.e., ensemble-average times of puff arrival, peak, leaving, duration, ascent, and descent) than for the ensemble-average dosage and peak concentration. The majority of the obtained values of validation metrics were inside established acceptance limits. Based on the obtained model performance indices, the CFD-RANS methodology as implemented in the code ADREA-HF is able to predict the ensemble-average temporal quantities related to transient emissions of airborne material in urban areas within the range of the model performance acceptance criteria established in the literature. The CFD-RANS methodology as implemented in the code ADREA-HF is also able to predict the ensemble-average dosage, but the dosage results should be treated with some caution; as in one case, the observed ensemble-average dosage was under-estimated slightly more than the acceptance criteria. Ensemble

  10. A REVIEW ON CONTROLLED DRUG RELEASE FORMULATION: SPANSULES

    OpenAIRE

    Rinky Maurya; Dr. Pramod Kumar Sharma; Rishabha Malviya

    2014-01-01

    Spansules are a dosage form which was considered as one of the Advanced Drug Delivery System. Multidrug preparations can be delivered easily by spansules or granules in capsule technology. This type of delivery system designed to release a drug or a medicament at two or more different rates or in different span of time. A quick/slow release system provides an initial release of drug followed by a constant rate of drug release over a extended period or a defined period of time and in slow/quic...

  11. Polymeric materials and formulation technologies for modified-release tablet development.

    Science.gov (United States)

    Zarate, J; Igartua, M; Hernández, R M; Pedraz, J L

    2009-11-01

    Over the last years significant advances have been made in the area of drug delivery with the development of modified-release (MR) dosage forms. The present review is divided into two parts, one dealing with technologies for the design of modified-release drug delivery tablets and the other with the use of synthetic and natural polymers that are capable of controlling drug release.

  12. Development and validation of an in vitro–in vivo correlation (IVIVC model for propranolol hydrochloride extended-release matrix formulations

    Directory of Open Access Journals (Sweden)

    Chinhwa Cheng

    2014-06-01

    Full Text Available The objective of this study was to develop an in vitro–in vivo correlation (IVIVC model for hydrophilic matrix extended-release (ER propranolol dosage formulations. The in vitro release characteristics of the drug were determined using USP apparatus I at 100 rpm, in a medium of varying pH (from pH 1.2 to pH 6.8. In vivo plasma concentrations and pharmacokinetic parameters in male beagle dogs were obtained after administering oral, ER formulations and immediate-release (IR commercial products. The similarity factor f2 was used to compare the dissolution data. The IVIVC model was developed using pooled fraction dissolved and fraction absorbed of propranolol ER formulations, ER-F and ER-S, with different release rates. An additional formulation ER-V, with a different release rate of propranolol, was prepared for evaluating the external predictability. The results showed that the percentage prediction error (%PE values of Cmax and AUC0–∞ were 0.86% and 5.95%, respectively, for the external validation study. The observed low prediction errors for Cmax and AUC0–∞ demonstrated that the propranolol IVIVC model was valid.

  13. The type 2 diabetes associated minor allele of rs2237895 KCNQ1 associates with reduced insulin release following an oral glucose load.

    Directory of Open Access Journals (Sweden)

    Johan Holmkvist

    Full Text Available BACKGROUND: Polymorphisms in the potassium channel, voltage-gated, KQT-like subfamily, member 1 (KCNQ1 have recently been reported to associate with type 2 diabetes. The primary aim of the present study was to investigate the putative impact of these KCNQ1 polymorphisms (rs2283228, rs2237892, rs2237895, and rs2237897 on estimates of glucose stimulated insulin release. METHODOLOGY/PRINCIPAL FINDINGS: Genotypes were examined for associations with serum insulin levels following an oral glucose tolerance test (OGTT in a population-based sample of 6,039 middle-aged and treatment-naïve individuals. Insulin release indices estimated from the OGTT and the interplay between insulin sensitivity and insulin release were investigated using linear regression and Hotelling T2 analyses. Applying an additive genetic model the minor C-allele of rs2237895 was associated with reduced serum insulin levels 30 min (mean+/-SD: (CC 277+/-160 vs. (AC 280+/-164 vs. (AA 299+/-200 pmol/l, p = 0.008 after an oral glucose load, insulinogenic index (29.6+/-17.4 vs. 30.2+/-18.7vs. 32.2+/-22.1, p = 0.007, incremental area under the insulin curve (20,477+/-12,491 vs. 20,503+/-12,386 vs. 21,810+/-14,685, p = 0.02 among the 4,568 individuals who were glucose tolerant. Adjustment for the degree of insulin sensitivity had no effect on the measures of reduced insulin release. The rs2237895 genotype had a similar impact in the total sample of treatment-naïve individuals. No association with measures of insulin release were identified for the less common diabetes risk alleles of rs2237892, rs2237897, or rs2283228. CONCLUSION: The minor C-allele of rs2237895 of KCNQ1, which has a prevalence of about 42% among Caucasians was associated with reduced measures of insulin release following an oral glucose load suggesting that the increased risk of type 2 diabetes, previously reported for this variant, likely is mediated through an impaired beta cell function.

  14. In vitro models for the prediction of in vivo performance of oral dosage forms

    NARCIS (Netherlands)

    Kostewicz, E.S.; Abrahamsson, B.; Brewster, M.; Brouwers, J.; Butler, J.; Carlert, S.; Dickinson, P.A.; Dressman, J.; Holm, R.; Klein, S.; Mann, J.; McAllister, M.; Minekus, M.; Muenster, U.; Müllertz, A.; Verwei, M.; Vertzoni, M.; Weitschies, W.; Augustijns, P.

    2014-01-01

    Accurate prediction of the in vivo biopharmaceutical performance of oral drug formulations is critical to efficient drug development. Traditionally, in vitro evaluation of oral drug formulations has focused on disintegration and dissolution testing for quality control (QC) purposes. The connection

  15. When and how should we teach the basic concepts of radiation beam dosage

    International Nuclear Information System (INIS)

    Brewin, T.B.

    1977-01-01

    The difficulty that many trainees, including those medically qualified, have in achieving a sound working grasp of certain basic principles of radiation beam dosage is often underestimated. Since any failure of understanding may seriously impair the efficiency of the team treating the patient, the discussion of these problems (and especially the monitoring of the results of such discussion by means of oral and written tests) deserves a high priority. Contrary to traditional practice, there would seem to be no good reason why teaching of radiation beam dosage, and the effect on dose-rate of changes in the treatment distance or in the amount of scattered radiation, should not begin in the very first week of training and be immediately integrated with discussion of the dose-rate information available at every radiotherapy unit when the patient is treated. A preliminary course of physics lectures does not usually make the understanding of these principles any easier and can be done either concurrently or later. For many radiotherapy trainees and for many doctors in other fields, comparison with drug dosage and with the brightness and scatter of ordinary light beams, avoiding technical terms so far as possible, may achieve a better initial understanding of basic principles than is achieved by mathematical equations and theoretical physics. (author)

  16. When and how should we teach the basic concepts of radiation beam dosage

    Energy Technology Data Exchange (ETDEWEB)

    Brewin, T B [Institute of Radiotherapeutics and Oncology, Glasgow (UK)

    1977-06-01

    The difficulty that many trainees, including those medically qualified, have in achieving a sound working grasp of certain basic principles of radiation beam dosage is often underestimated. Since any failure of understanding may seriously impair the efficiency of the team treating the patient, the discussion of these problems (and especially the monitoring of the results of such discussion by means of oral and written tests) deserves a high priority. Contrary to traditional practice, there would seem to be no good reason why teaching of radiation beam dosage, and the effect on dose-rate of changes in the treatment distance or in the amount of scattered radiation, should not begin in the very first week of training and be immediately integrated with discussion of the dose-rate information available at every radiotherapy unit when the patient is treated. A preliminary course of physics lectures does not usually make the understanding of these principles any easier and can be done either concurrently or later. For many radiotherapy trainees and for many doctors in other fields, comparison with drug dosage and with the brightness and scatter of ordinary light beams, avoiding technical terms so far as possible, may achieve a better initial understanding of basic principles than is achieved by mathematical equations and theoretical physics.

  17. A novel microdialysis-dissolution/permeation system for testing oral dosage forms

    DEFF Research Database (Denmark)

    Fong, Sophia Yui Kau; Poulsen, Jessie; Brandl, Martin

    2016-01-01

    A novel microdialysis-dissolution/permeation (M-D/P) system was developed for the biopharmaceutical assessment of oral drug formulations. This system consists of a side-by-side diffusion chamber, a microdialysis unit fixed within the dissolution chamber for continuous sampling, and a biomimetic P...

  18. Resolution of methylphenidate osmotic release oral system-induced hair loss in two siblings after dose escalation.

    Science.gov (United States)

    Ardic, Ulku Akyol; Ercan, Eyup Sabri

    2017-11-01

    This report describes the cases of two siblings who experienced hair loss after treatment with methylphenidate (MPH) osmotic release oral system (OROS). Hair loss was resolved after discontinuation of the drug, but the children re-initiated treatment, after which hair loss again occurred, but they continued the treatment. After dose escalation, the hair loss resolved. This is the first report to describe resolution of OROS-MPH-induced hair loss after dose escalation. © 2017 Japan Pediatric Society.

  19. Advances in research of targeting delivery and controlled release of drug-loaded nanoparticles

    International Nuclear Information System (INIS)

    Tan Zhonghua

    2003-01-01

    Biochemistry drug, at present, is still the main tool that human struggle to defeat the diseases. So, developing safe and efficacious technique of drug targeting delivery and controlled release is key to enhance curative effect, decrease drug dosage, and lessen its side effect. Drug-loaded nanoparticles, which is formed by conjugate between nanotechnology and modern pharmaceutics, is a new fashioned pharmic delivery carrier. Because of advantages in pharmic targeting transport and controlled or slow release and improving bioavailability, it has been one of developing trend of modern pharmaceutical dosage forms

  20. Design and characterization of sustained release ketoprofen entrapped carnauba wax microparticles.

    Science.gov (United States)

    Oliveira, Rodinelli B; Nascimento, Thais L; Lima, Eliana M

    2012-01-01

    Ketoprofen is a non-steroid anti-inflammatory drug (NSAID) used in the treatment of rheumatic diseases and in mild to moderate pain. Ketoprofen has a short biological half-life and the commercially available conventional release formulations require dosages to be administered at least 2-3 times a day. Due to these characteristics, ketoprofen is a good candidate for the preparation of controlled release formulations. In this work, a multiparticulate-sustained release dosage form containing ketoprofen in a carnauba wax matrix was developed. Particles were prepared by an emulsion congealing technique. System variables were optimized using fractional factorial and response surface experimental design. Characterization of the particles included size and morphology, flow rate, drug loading and in vitro drug release. Spherical particles were obtained with high drug load and sustained drug release profile. The optimized particles had an average diameter of approximately 200 µm, 50% (w/w) drug load, good flow properties and prolonged ketoprofen release for more than 24 h. Carnauba wax microspheres prepared in this work represent a new multiparticulate-sustained release system for the NSAID ketoprofen, exhibiting good potential for application in further pharmaceutical processes.

  1. A novel validated stability indicating high performance liquid chromatographic method for estimation of degradation behavior of ciprofloxacin and tinidazole in solid oral dosage

    Directory of Open Access Journals (Sweden)

    Bhupendrasinh K Vaghela

    2013-01-01

    Full Text Available Objective: The objective of current investigation was to study the degradation behavior of Ciprofloxacin and Tinidazole. The study was performed as per International Conference on Harmonization recommended stress condition. A novel stability-indicating reverse phase HPLC method was developed for the determination of Ciprofloxacin and Tinidazole purity in the presence of its impurities and forced degradation products. This method is also capable to separate placebo peaks as well in pharmaceutical dosage forms. The solid oral dosage form was subjected to the stress conditions such as oxidative, acid, base hydrolysis, heat and photolytic degradation. Materials and Methods: The method was developed using Waters symmetry shield, Reverse Phase (RP C18, 250mm x 4.6mm, 5΅ as a stationary phase. The mobile phase containing a gradient mixture of solvent A and B. 10mM phosphate buffer, adjusted pH 3.0 with phosphoric acid was used as a buffer. Buffer pH 3.0 was used as solvent A and buffer pH 3.0: Acetonitrile in the ratio of 20: 80 v/v were used as solvent B. The eluted compounds were monitored 278 nm (Ciprofloxacin, 317 nm (Tinidazole. The run time was 50 minute. Results: In the precision study the % RSD for the result of Ciprofloxacin, Tinidazole and its impurities was below 10%. The method was linear with the correlation coefficient greater than 0.997. The percentage recoveries were calculated and observed from 93.0% to 106.7%.The peak purity of Ciprofloxacin, Tinidazole peak had not shown any flag, thus proved the stability-indicating power of the method. Conclusion: The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness.

  2. Development of sustained release capsules containing "coated matrix granules of metoprolol tartrate".

    Science.gov (United States)

    Siddique, Sabahuddin; Khanam, Jasmina; Bigoniya, Papiya

    2010-09-01

    The objective of this investigation was to prepare sustained release capsule containing coated matrix granules of metoprolol tartrate and to study its in vitro release and in vivo absorption. The design of dosage form was performed by choosing hydrophilic hydroxypropyl methyl cellulose (HPMC K100M) and hydrophobic ethyl cellulose (EC) polymers as matrix builders and Eudragit® RL/RS as coating polymers. Granules were prepared by composing drug with HPMC K100M, EC, dicalcium phosphate by wet granulation method with subsequent coating. Optimized formulation of metoprolol tartrate was formed by using 30% HPMC K100M, 20% EC, and ratio of Eudragit® RS/RL as 97.5:2.5 at 25% coating level. Capsules were filled with free flowing optimized granules of uniform drug content. This extended the release period upto 12 h in vitro study. Similarity factor and mean dissolution time were also reported to compare various dissolution profiles. The network formed by HPMC and EC had been coupled satisfactorily with the controlled resistance offered by Eudragit® RS. The release mechanism of capsules followed Korsemeyer-Peppas model that indicated significant contribution of erosion effect of hydrophilic polymer. Biopharmaceutical study of this optimized dosage form in rabbit model showed 10 h prolonged drug release in vivo. A close correlation (R(2) = 0.9434) was established between the in vitro release and the in vivo absorption of drug. The results suggested that wet granulation with subsequent coating by fluidized bed technique, is a suitable method to formulate sustained release capsules of metoprolol tartrate and it can perform therapeutically better than conventional immediate release dosage form.

  3. Relative bioavailability of single doses of prolonged-release tacrolimus administered as a suspension, orally or via a nasogastric tube, compared with intact capsules: a phase 1 study in healthy participants.

    Science.gov (United States)

    Undre, Nasrullah; Dickinson, James

    2017-04-04

    Tacrolimus, an immunosuppressant widely used in solid organ transplantation, is available as a prolonged-release capsule for once-daily oral administration. In the immediate postsurgical period, if patients cannot take intact capsules orally, tacrolimus therapy is often initiated as a suspension of the capsule contents, delivered orally or via a nasogastric tube. This study evaluated the relative bioavailability of prolonged-release tacrolimus suspension versus intact capsules in healthy participants. A phase 1, open-label, single-dose, cross-over study. A single clinical research unit. In total, 20 male participants, 18-55 years old, entered and completed the study. All participants received nasogastric administration of tacrolimus 10 mg suspension in treatment period 1, with randomisation to oral administration of suspension or intact capsules in periods 2 and 3. Blood concentration-time profile over 144 hours was used to estimate pharmacokinetic parameters. Primary end point: relative bioavailability of prolonged-release intact capsule versus oral or nasogastric administration of prolonged-release tacrolimus suspension (area under the concentration-time curve (AUC) from time 0 to infinity post-tacrolimus dose (AUC 0-∞ ); AUC measured until the last quantifiable concentration (AUC 0-tz ); maximum observed concentration (C max ); time to C max (T max )). Tolerability was assessed throughout the study. Relative bioavailability of prolonged-release tacrolimus suspension administered orally was similar to intact capsules, with a ratio of least-square means for AUC 0-tz and AUC 0-∞ of 1.05 (90% CI 0.96 to 1.14). Bioavailability was lower with suspension administered via a nasogastric tube versus intact capsules (17%; ratio 0.83; CI 0.76 to 0.92). C max was higher for oral and nasogastric suspension (30% and 28%, respectively), and median T max was shorter (difference 1.0 and 1.5 hours postdose, respectively) versus intact capsules (2.0 hours). Single 10

  4. Preparation of fluconazole buccal tablet and influence of formulation expedients on its properties.

    Science.gov (United States)

    Mohamed, Saifulla P; Muzzammil, Shariff; Pramod, Kumar T M

    2011-04-01

    The aim of present study was to prepare buccal tablets of fluconazole for oral candidiasis. The dosage forms were designed to release the drug above the minimum inhibitory concentration for prolonged period of time so as to reduce the frequency of administration and to overcome the side effects of systemic treatment. The buccal tablets were prepared by using Carbopol 71G and Noveon AA-1 by direct compression method. Microcrystalline cellulose was used as the filler and its effect was also studied. The prepared dosage forms were evaluated for physicochemical properties, in vitro release studies and mucoadhesive properties using sheep buccal mucosa as a model tissue. Tablets containing 50% of polymers (Carbopol & Noveon) were found to be the best with moderate swelling along with favorable bioadhesion force, residence time and in vitro drug release. The in vitro drug release studies revealed that drug released for 8 h, which in turn may reduce dosing frequency and improved patient compliance in oral candidiasis patients.

  5. Comparison of vascular alpha(1)-adrenoceptor antagonism of tamsulosin in oral controlled absorption system (OCAS) and modified release (MR) formulations

    NARCIS (Netherlands)

    Michel, M. C.; Korstanje, C.; Krauwinkel, W.; Shear, M.; Davies, J.; Quartel, A.

    2005-01-01

    Objective: The cardiovascular a-l-adrenoceptor (AR) antagonism of the new oral controlled absorption system (OCAS) 0.4 mg tablet formulation of tamsulosin was compared with that of the modified release (MR) 0.4 mg capsule formulation in healthy male volunteers after a single dose in the fasted

  6. Improved oral absorption of tacrolimus by a solid dispersion with hypromellose and sodium lauryl sulfate.

    Science.gov (United States)

    Jung, Hyuck Jun; Ahn, Hye In; Park, Ji Yeon; Ho, Myoung Jin; Lee, Dae Ro; Cho, Ha Ra; Park, Jun Seo; Choi, Yong Seok; Kang, Myung Joo

    2016-02-01

    A novel surfactant-incorporated hydroxypropyl methylcellulose (HPMC) solid dispersion (SD) system was constructed in order to facilitate the release rate and oral absorption of tacrolimus (FK506), a poorly water-soluble immunosuppressant. Several emulsifiers including sodium lauryl sulfate (SLS), as drug release promotors, were employed with HPMC to fabricate SD using the solvent wetting method. The solid state characteristics using differential scanning calorimetry and X-ray powder diffraction, revealed that FK506 was molecularly distributed within all dispersions in amorphous form. The dissolution rates of FK506 in SLS-incorporated SDs were much higher than those in SDs prepared with HPMC alone, and even with stearoyl polyoxyl-32 glycerides or tocopheryl polyethylene glycol 1000 succinate. In particular, the greatest dissolution enhancement was obtained from the SD consisting of the drug, HPMC, and SLS in a weight ratio of 1:1:3, providing a 50-fold higher drug concentration within 15 min, compared with HPMC SD. In vivo absorption study in rats demonstrates that the optimized formula remarkably increased the oral absorption of FK506, providing about 4.0-fold greater bioavailability (p<0.05) compared with the marketed product (Prograf®, Astellas Pharma). These data suggest that a novel SLS/HPMC SD may be an advantageous dosage form of FK506, boosting the dissolution and absorption in gastrointestinal tract. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Formulation of cefuroxime axetil oral suspension and investigation of its pharmaceutical properties

    Directory of Open Access Journals (Sweden)

    Hadi Valizadeh

    2011-12-01

    Full Text Available Purpose: Cefuroxime is the second generation cephalosporin, which its intravenous and oral dosage forms are available. Oral route is the selective method for administration of most of the drugs. The aim of this study was formulating ‘for oral’ cefuroxime axetil suspensions. Methods: Minitab (ver.15 was used to design the formulations containing 125 mg of cefuroxime in 5 ml vehicle.After selecting the acceptable preparations, physical stability tests and other tests such as dissolution rate, pH, zeta potential and viscosity measurement of formulations were performed. Results: From all 33 formulations, only 9 were selected to further investigation. Considering no sedimentation, the sedimentation volume was determined to be 1. The degrees of flocculation were also equal to 1. All selected formulations released the drug between 81-100% in 30 minutes which was acceptable according to the USP32 criteria. The results of assay test also proved that all formulations contain the drug in acceptable range (91-106%. The viscosity curves showed that the systems were pseudo plastic and thixotrop. Conclusion: Designed cefuroxime axetil formulations had good qualities and could be added as a new product to Iran drug marketing.

  8. Weight loss during therapy with olanzapine orally disintegrating tablets: two case reports.

    Science.gov (United States)

    Kozumplik, Oliver; Uzun, Suzana; Jakovljević, Miro

    2009-03-01

    The aim of this article is to report weight loss in patients with schizophrenia after switching from olanzapine standard oral tablet (SOT) to olanzapine orally disintegrating tablets (ODT). In the first case report, the patient was switched to olanzapine ODT in daily dosage of 20 mg, while in the second case report, the patient was switched to olanzapine ODT in daily dosage of 15 mg, and weight loss was similar (14 kg vs. 15 kg). Switching patients from olanzapine SOT to olanzapine ODT treatment resulted in significant weight loss that was maintained during 12 months in both case reports. Further controlled clinical investigations are necessary to evaluate change in weight during treatment with olanzapine ODT, and to improve our understanding of this change.

  9. Optimization and Evaluation of Desloratadine Oral Strip: An Innovation in Paediatric Medication

    OpenAIRE

    Singh, Harmanpreet; Kaur, Mandeep; Verma, Hitesh

    2013-01-01

    Patients, especially children, are the most difficult to treat in all groups of population mainly because they can not swallow the solid dosage form. Due to this reason they are often prescribed liquid dosage forms. But these formulations have their own disadvantages (lack of dose accuracy during administration, spitting by children, spillage, lack of stability, difficulty in transportation, etc.). Oral strip technology is one such technology to surpass these disadvantages. Desloratadine, a d...

  10. DETERMINATION OF TAMSULOSIN HYDROCHLORIDE RELEASE PHARMACOKINETICS IN PROSTATE GLAND BY A RADIOTRACER METHOD

    Directory of Open Access Journals (Sweden)

    V. I. Grytsenko

    2013-10-01

    Full Text Available Introduction: recently in Ukraine prostate diseases have taken one of the leading places among male urological pathologies. Prostate gland hyperplasia is one of the most common ones. Causes of hyperplasia have not been reliably established so far, however, it has been proved that the poor state of androgen production in men is an integral condition for the development of benign prostatic hyperplasia. One of the urgent tasks of modern pharmaceutical science is to create new high-performance drugs in such dosage forms that provide optimal therapeutic effect with minimal adverse complications. Among a large number of drugs for the treatment of prostate diseases a prominent place is occupied by alpha-adrenoblockers – drugs of the first-line treatments that affect the α1А-adrenergic receptors, reduce or completely eliminate the muscle tone of the prostatic urethra and bladder neck. Tamsulosin hydrochloride is a selective and competitive blocker of postsynaptic α1А-adrenergic receptors. The selectivity of tamsulosin to α1А-adrenergic receptors, which are located in the bladder, is 20 times greater than its ability to interact with α1В-adrenoceptors that are located in vascular smooth muscles. Objective: to study the pharmacokinetics of tamsulosin hydrochloride release into prostate gland after oral and rectal administration by a radioactive-tracer technique. Materials and methods of research: tamsulosin hydrochloride substance and suppositories with this substance labeled by 14С with a specific activity of 3.7× 107Bq/mg. Pharmacokinetic studies of tamsulosin hydrochloride in the prostate were performed after oral and rectal administration. The experiments were carried out on white mature male rats of Wistar line weighing 210 ± 10 g. Pharmacokinetic studies were performed using a radioactive-tracer technique (tracers after oral and rectal administration of tamsulosin. Results and their discussion: after rectal administration the release of

  11. Effect of oral calcium and calcium + fluoride treatments on mouse bone properties during suspension

    Science.gov (United States)

    Simske, S. J.; Luttges, M. W.; Allen, K. A.; Spooner, B. S. (Principal Investigator)

    1992-01-01

    The bone effects of oral dosages of calcium chloride with or without supplementary sodium fluoride were assessed in antiorthostatically suspended mice. Two calcium dosages were used to replace half (3.1 mM) or all(6.3 mM) of the dietary calcium lost due to reduced food intake by the suspended mice. Two groups of 6.3 mM CaCl2-treated mice were additionally treated with 0.25 or 2.5 mM NaF. The results indicate that supplementation of the mouse drinking water with calcium salts prevents bone changes induced by short-term suspension, while calcium salts in combination with fluoride are less effective as fluoride dosage increases. However, the calcium supplements change the relationship between the femur mechanical properties and the mineral composition of the bone. Because of this, it appears that oral calcium supplements are effective through a mechanism other than simple dietary supplementation and may indicate a dependence of bone consistency on systemic and local fluid conditions.

  12. Design and evaluation of buccal films as paediatric dosage form for transmucosal delivery of ondansetron.

    Science.gov (United States)

    Trastullo, Ramona; Abruzzo, Angela; Saladini, Bruno; Gallucci, Maria Caterina; Cerchiara, Teresa; Luppi, Barbara; Bigucci, Federica

    2016-08-01

    In the process of implementation and innovation of paediatric dosage forms, buccal films for transmucosal administration of drug represent one of the most interesting approach. In fact, films are able to provide an extended duration of activity allowing minimal dosage and frequency and offer an exact and flexible dose, associated with ease of handling. The objective of the present study was to develop polymeric films for the sustained release of ondansetron hydrochloride, a selective inhibitor of 5-HT3 receptors indicated in paediatrics for the prevention and treatment of nausea and vomiting caused by cytotoxic chemotherapy or radiotherapy and postoperatively. Films were prepared by casting and drying of aqueous solutions containing different weight ratios of hydroxypropylmethylcellulose (HPMC) with chitosan (CH) or sodium hyaluronate (HA) or gelatin (GEL) and characterized for their physico-chemical and functional properties. The presence of HA, GEL and CH did not improve the mucoadhesive properties of HPMC film. The inclusion of GEL and CH in HPMC film increased in vitro drug release with respect to the inclusion of HA, although films containing HA showed the highest water uptake. Moreover in agreement with the release behaviour, the inclusion of CH and GEL provided higher drug permeation through porcine buccal mucosa with respect to HPMC film and ensured linear permeation profiles of drug. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Optimization and Evaluation of Desloratadine Oral Strip: An Innovation in Paediatric Medication

    Directory of Open Access Journals (Sweden)

    Harmanpreet Singh

    2013-01-01

    Full Text Available Patients, especially children, are the most difficult to treat in all groups of population mainly because they can not swallow the solid dosage form. Due to this reason they are often prescribed liquid dosage forms. But these formulations have their own disadvantages (lack of dose accuracy during administration, spitting by children, spillage, lack of stability, difficulty in transportation, etc.. Oral strip technology is one such technology to surpass these disadvantages. Desloratadine, a descarboethoxy derivative of loratadine, is a second generation antihistaminic drug approved for usage in allergic rhinitis among paediatric population and is available in markets as suspension. An attempt has been made to design and optimize the oral strip containing desloratadine as an active ingredient. Oral strip was optimized with the help of optimal experimental design using polymer concentration, plasticizer type, and plasticizer concentration as independent variables. Prepared oral strips were evaluated for physicochemical parameter, mechanical strength parameters, disintegration time, dissolution, surface pH, and moisture sorption tendency. Optimized formulation was further evaluated by scanning electron microscopy, moisture content, and histological alteration in oral mucosa. Accelerated stability studies were also carried out for optimized formulations. Results were analysed with the help of various statistical tools at and .

  14. Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 2: In vitro approach using mechanical force methods.

    Science.gov (United States)

    Drumond, Nélio; Stegemann, Sven

    2018-06-01

    Predicting the potential for unintended adhesion of solid oral dosage forms (SODF) to mucosal tissue is an important aspect that should be considered during drug product development. Previous investigations into low strength mucoadhesion based on particle interactions methods provided evidence that rheological measurements could be used to obtain valid predictions for the development of SODF coatings that can be safely swallowed. The aim of this second work was to estimate the low mucoadhesive strength properties of different polymers using in vitro methods based on mechanical forces and to identify which methods are more precise when measuring reduced mucoadhesion. Another aim was to compare the obtained results to the ones achieved with in vitro particle interaction methods in order to evaluate which methodology can provide stronger predictions. The combined results correlate between particle interaction methods and mechanical force measurements. The polyethylene glycol grades (PEG) and carnauba wax showed the lowest adhesive potential and are predicted to support safe swallowing. Hydroxypropyl methylcellulose (HPMC) along with high molecular grades of polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) exhibited strong in vitro mucoadhesive strength. The combination of rheological and force tensiometer measurements should be considered when assessing the reduced mucoadhesion of polymer coatings to support safe swallowing of SODF. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Submicron Emulsions and Their Applications in Oral Delivery.

    Science.gov (United States)

    Mundada, Veenu; Patel, Mitali; Sawant, Krutika

    2016-01-01

    A "submicron emulsion" is an isotropic mixture of drug, lipids, and surfactants, usually with hydrophilic cosolvents and with droplet diameters ranging from 10 to 500 nm. Submicron emulsions are of increasing interest in medicine due to their kinetic stability, high solubilizing capacity, and tiny globule size. Because of these properties, they have been applied in various fields, such as personal care, cosmetics, health care, pharmaceuticals, and agrochemicals. Submicron emulsions are by far the most advanced nanoparticulate systems for the systemic delivery of biologically active agents for controlled drug delivery and targeting. They are designed mainly for pharmaceutical formulations suitable for various routes of administration like parenteral, ocular, transdermal, and oral. This review article describes the marked potential of submicron emulsions for oral drug delivery owing to their numerous advantages like reduced first pass metabolism, inhibition of P-glycoprotein efflux system, and enhanced absorption via intestinal lymphatic pathway. To overcome the limitations of liquid dosage forms, submicron emulsions can be formulated into solid dosage forms such as solid self-emulsifying systems. This article covers various types of submicron emulsions like microemulsion, nanoemulsion, and self-emulsifying drug delivery system (SEDDS), and their potential pharmaceutical applications in oral delivery with emphasis on their advantages, limitations, and advancements.

  16. [Understanding Oral and Nasal Mucosal Absorption of Fentanyl, and Rectal Absorption of Buprenorphine].

    Science.gov (United States)

    Shimoyama, Naohito; Shimoyama, Megumi; Kubota, Yukino; Kato, Yoko

    2015-11-01

    One of the key issues in the treatment of pain is to choose the appropriate route and dosage form of analgesics for each individual patient in pain. New drug forms of fentanyl absorbed by oral or nasal mucosa, and buprenorphine absorbed by rectal mucosa are described in this chapter. Only lipophilic opioids such as fentanyl and buprenorphine can be absorbed via the mucosa of oral or nasal cavity of the human body. The T max of rapid onset opioids (ROO) such as fentanyl buccal or sublingual tablets is the fastest among various dosage forms of opioid analgesics. However, such rapid increase in plasma concentration of fentanyl by ROO formulations may cause the risk of respiratory depression. Safe ways to use ROO analgesics are described.

  17. Effect of pore size of three-dimensionally ordered macroporous chitosan-silica matrix on solubility, drug release, and oral bioavailability of loaded-nimodipine.

    Science.gov (United States)

    Gao, Yikun; Xie, Yuling; Sun, Hongrui; Zhao, Qinfu; Zheng, Xin; Wang, Siling; Jiang, Tongying

    2016-01-01

    To explore the effect of the pore size of three-dimensionally ordered macroporous chitosan-silica (3D-CS) matrix on the solubility, drug release, and oral bioavailability of the loaded drug. 3D-CS matrices with pore sizes of 180 nm, 470 nm, and 930 nm were prepared. Nimodipine (NMDP) was used as the drug model. The morphology, specific surface area, and chitosan mass ratio of the 3D-CS matrices were characterized before the effect of the pore size on drug crystallinity, solubility, release, and in vivo pharmacokinetics were investigated. With the pore size of 3D-CS matrix decreasing, the drug crystallinity decreased and the aqueous solubility increased. The drug release was synthetically controlled by the pore size and chitosan content of 3D-CS matrix in a pH 6.8 medium, while in a pH 1.2 medium the erosion of the 3D-CS matrix played an important role in the decreased drug release rate. The area under the curve of the drug-loaded 3D-CS matrices with pore sizes of 930 nm, 470 nm, and 180 nm was 7.46-fold, 5.85-fold, and 3.75-fold larger than that of raw NMDP respectively. Our findings suggest that the oral bioavailability decreased with a decrease in the pore size of the matrix.

  18. Oral carnitine therapy in children with cystinosis and renal Fanconi syndrome

    International Nuclear Information System (INIS)

    Gahl, W.A.; Bernardini, I.; Dalakas, M.; Rizzo, W.B.; Harper, G.S.; Hoeg, J.M.; Hurko, O.; Bernar, J.

    1988-01-01

    11 children with either cystinosis or Lowe's syndrome had a reduced content of plasma and muscle carnitine due to renal Fanconi syndrome. After treatment with oral L-carnitine, 100 mg/kg per d divided every 6 h, plasma carnitine concentrations became normal in all subjects within 2 d. Initial plasma free fatty acid concentrations, inversely related to free carnitine concentrations, were reduced after 7-20 mo of carnitine therapy. Muscle lipid accumulation, which varied directly with duration of carnitine deficiency (r = 0.73), improved significantly in three of seven rebiopsied patients after carnitine therapy. One Lowe's syndrome patient achieved a normal muscle carnitine level after therapy. Muscle carnitine levels remained low in all cystinosis patients, even though cystinotic muscle cells in culture took up L-[ 3 H]carnitine normally. The half-life of plasma carnitine for cystinotic children given a single oral dose approximated 6.3 h; 14% of ingested L-carnitine was excreted within 24 h. Studies in a uremic patient with cystinosis showed that her plasma carnitine was in equilibrium with some larger compartment and may have been maintained by release of carnitine from the muscle during dialysis. Because oral L-carnitine corrects plasma carnitine deficiency, lowers plasma free fatty acid concentrations, and reverses muscle lipid accumulation in some patients, its use as therapy in renal Fanconi syndrome should be considered. However, its efficacy in restoring muscle carnitine to normal, and the optimal dosage regimen, have yet to be determined

  19. The Type 2 Diabetes Associated Minor Allele of rs2237895 KCNQ1 Associates with Reduced Insulin Release Following an Oral Glucose Load

    DEFF Research Database (Denmark)

    Brunak, Søren; Holmkvist, J; Banasik, K

    2009-01-01

    , and rs2237897) on estimates of glucose stimulated insulin release. METHODOLOGY/PRINCIPAL FINDINGS: Genotypes were examined for associations with serum insulin levels following an oral glucose tolerance test (OGTT) in a population-based sample of 6,039 middle-aged and treatment-naïve individuals. Insulin...... release indices estimated from the OGTT and the interplay between insulin sensitivity and insulin release were investigated using linear regression and Hotelling T2 analyses. Applying an additive genetic model the minor C-allele of rs2237895 was associated with reduced serum insulin levels 30 min (mean......,568 individuals who were glucose tolerant. Adjustment for the degree of insulin sensitivity had no effect on the measures of reduced insulin release. The rs2237895 genotype had a similar impact in the total sample of treatment-naïve individuals. No association with measures of insulin release were identified...

  20. A benefit/risk approach towards selecting appropriate pharmaceutical dosage forms - an application for paediatric dosage form selection.

    Science.gov (United States)

    Sam, Tom; Ernest, Terry B; Walsh, Jennifer; Williams, Julie L

    2012-10-05

    The design and selection of new pharmaceutical dosage forms involves the careful consideration and balancing of a quality target product profile against technical challenges and development feasibility. Paediatric dosage forms present particular complexity due to the diverse patient population, patient compliance challenges and safety considerations of this vulnerable population. This paper presents a structured framework for assessing the comparative benefits and risks of different pharmaceutical design options against pre-determined criteria relating to (1) efficacy, (2) safety and (3) patient access. This benefit/risk framework has then been applied to three hypothetical, but realistic, scenarios for paediatric dosage forms in order to explore its utility in guiding dosage form design and formulation selection. The approach allows a rigorous, systematic and qualitative assessment of the merits and disadvantages of each dosage form option and helps identify mitigating strategies to modify risk. The application of a weighting and scoring system to the criteria depending on the specific case could further refine the analysis and aid decision-making. In this paper, one case study is scored for illustrative purposes. However, it is acknowledged that in real development scenarios, the generation of actual data considering the very specific situation for the patient/product/developer would come into play to drive decisions on the most appropriate dosage form strategy. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. ANTITUBERCULOSIS DRUG DOSAGE FORMS: RANGE, KEY BENEFITS AND PROSPECTS OF TECHNOLOGICAL IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    M. E. Kim

    2016-01-01

    Full Text Available Interest to research in the development of new formulations of antituberculosis drugs due to the high incidence of tuberculosis in the Republic of Kazakhstan and the Russian Federation nowadays, including with acquired drug resistance. The reason for the development of acquired drug resistance is to interrupt the treatment of patients is the high toxicity of antituberculosis drugs. The improving the efficiency of antituberculosis therapy remains one of the most pressing.The aim this study was to review the dosage forms of antituberculosis drugs currently used and the ways to improve them.Methods. The study was conducted on the basis of scientific analysis (eLibrary database, PubMed, Cyberleninca, patent (kzpatents, reference (Klifar, Drugs register and technical literature.Results. It was revealed that the antituberculosis drugs are available in the form of tablets, capsules, granules for oral use and injection solutions. The advantages and disadvantages of oral dosage forms of antituberculosis drugs: tablets, capsules, granules, syrups, suspensions are described. The importance of the development and implementation in practice of pediatric formulations of antituberculosis drugs is mentioned. The state of current research inhaled formulations for the treatment of tuberculosis is described. The prospects of directional inhalation exposure by immobilization of antituberculosis drugs in liposomes, niosomes, nanocapsules, micelles, micro- and nanoparticles are mentioned. The prospect of the rectal formulations use is described. The increase in interest in the molecular encapsulation of medicinal substances with cyclodextrins in connection with the possibility of increasing the bioavailability of active ingredients, reduce the harmful effects on the gastrointestinal tract, extension, elimination of interaction of incompatible components in combination preparations, the protection of unstable substances is

  2. Alginate Microencapsulation for Oral Immunisation of Finfish: Release Characteristics, Ex Vivo Intestinal Uptake and In Vivo Administration in Atlantic Salmon, Salmo salar L.

    Science.gov (United States)

    Ghosh, Bikramjit; Nowak, Barbara F; Bridle, Andrew R

    2015-12-01

    This study examined the feasibility of alginate microcapsules manufactured using a low-impact technology and reagents to protect orally delivered immunogens for use as immunoprophylactics for fish. Physical characteristics and protein release kinetics of the microcapsules were examined at different pH and temperature levels using a microencapsulated model protein, bovine serum albumin (BSA). Impact of the microencapsulation process on contents was determined by analysing change in bioactivity of microencapsulated lysozyme. Feasibility of the method for oral immunoprophylaxis of finfish was assessed using FITC-labelled microcapsules. These were applied to distal intestinal explants of Atlantic salmon (Salmo salar) to investigate uptake ex vivo. Systemic distribution of microcapsules was investigated by oral administration of FITC-labelled microcapsules to Atlantic salmon fry by incorporating into feed. The microcapsules produced were structurally robust and retained surface integrity, with a modal size distribution of 250-750 nm and a tendency to aggregate. Entrapment efficiency of microencapsulation was 51.2 % for BSA and 43.2 % in the case of lysozyme. Microcapsules demonstrated controlled release of protein, which increased with increasing pH or temperature, and the process had no significant negative effect on bioactivity of lysozyme. Uptake of fluorescent-labelled microcapsules was clearly demonstrated by intestinal explants over a 24-h period. Evidence of microcapsules was found in the intestine, spleen, kidney and liver of fry following oral administration. Amenability of the microcapsules to intestinal uptake and distribution reinforced the strong potential for use of this microencapsulation method in oral immunoprophylaxis of finfish using sensitive immunogenic substances.

  3. Predictors of placebo response in adults with attention-deficit/hyperactivity disorder: data from 2 randomized trials of osmotic-release oral system methylphenidate

    NARCIS (Netherlands)

    Buitelaar, J.K.; Sobanski, E.; Stieglitz, R.D.; Dejonckheere, J.; Waechter, S.; Schauble, B.

    2012-01-01

    OBJECTIVE: To find potential correlates of placebo response in adults with attention-deficit/hyperactivity disorder (ADHD) and gain insights into why placebo response may be high in clinical trials. METHOD: Post hoc analysis of placebo data from 2 randomized controlled trials of osmotic-release oral

  4. Toxic corneal epitheliopathy after intravitreal methotrexate and its treatment with oral folic acid.

    Science.gov (United States)

    Gorovoy, Ian; Prechanond, Tidarat; Abia, Maravillas; Afshar, Armin R; Stewart, Jay M

    2013-08-01

    To determine whether oral folic acid can ameliorate an iatrogenic, visually significant corneal epitheliopathy, which commonly occurs with intravitreal injections of methotrexate for the treatment of intraocular lymphoma. We report 2 cases of visually significant corneal epitheliopathy occurring after intravitreal injections of methotrexate for intraocular lymphoma. The first patient did not receive any treatment for the corneal disease, and the second patient with bilateral intraocular lymphoma received 1 mg of oral folic acid daily, a commonly used dosage for patients on systemic methotrexate. In the first patient without treatment, there was a complete regression of the corneal epithelial disease only when the frequency of intravitreal methotrexate was reduced from weekly to monthly as per a commonly used dosage regimen for methotrexate. In the second patient, the corneal disease improved 80% within 1 week of initiating oral folic acid for her eye already experiencing severe epitheliopathy during her weekly dosing regimen of methotrexate and also had significantly decreased epithelial disease in her second eye that started weekly intravitreal methotrexate several weeks after beginning oral folic acid. Currently, oral folic acid supplements are recommended for patients using systemic methotrexate to minimize drug toxicity. We suggest a similar use in patients undergoing intravitreal methotrexate injections to decrease toxic effects on the corneal epithelium.

  5. Oral transmucosal drug delivery--current status and future prospects.

    Science.gov (United States)

    Sattar, Mohammed; Sayed, Ossama M; Lane, Majella E

    2014-08-25

    Oral transmucosal drug delivery (OTDD) dosage forms have been available since the 1980s. In contrast to the number of actives currently delivered locally to the oral cavity, the number delivered as buccal or sublingual formulations remains relatively low. This is surprising in view of the advantages associated with OTDD, compared with conventional oral drug delivery. This review examines a number of aspects related to OTDD including the anatomy of the oral cavity, models currently used to study OTDD, as well as commercially available formulations and emerging technologies. The limitations of current methodologies to study OTDD are considered as well as recent publications and new approaches which have advanced our understanding of this route of drug delivery. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Development and characterization of a gastroretentive dosage form composed of chitosan and hydroxyethyl cellulose for alendronate

    OpenAIRE

    Chen YC; Ho HO; Chiu CC; Sheu MT

    2013-01-01

    Ying-Chen Chen,1,* Hsiu-O Ho,1,* Chiao-Chi Chiu,1 Ming-Thau Sheu1,2 1School of Pharmacy, College of Pharmacy, Taipei Medical University, 2Clinical Research Center and Traditional Herbal Medicine Research Center, Taipei Medical University Hospital, Taipei, Taiwan*These authors contributed equally to this workAbstract: In this study, alendronate, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastroretentive dosage form (GRDF) tablets to enhance its oral bioav...

  7. Scientific and Regulatory Considerations in Solid Oral Modified Release Drug Product Development.

    Science.gov (United States)

    Li, Min; Sander, Sanna; Duan, John; Rosencrance, Susan; Miksinski, Sarah Pope; Yu, Lawrence; Seo, Paul; Rege, Bhagwant

    2016-11-01

    This review presents scientific and regulatory considerations for the development of solid oral modified release (MR) drug products. It includes a rationale for patient-focused development based on Quality-by-Design (QbD) principles. Product and process understanding of MR products includes identification and risk-based evaluation of critical material attributes (CMAs), critical process parameters (CPPs), and their impact on critical quality attributes (CQAs) that affect the clinical performance. The use of various biopharmaceutics tools that link the CQAs to a predictable and reproducible clinical performance for patient benefit is emphasized. Product and process understanding lead to a more comprehensive control strategy that can maintain product quality through the shelf life and the lifecycle of the drug product. The overall goal is to develop MR products that consistently meet the clinical objectives while mitigating the risks to patients by reducing the probability and increasing the detectability of CQA failures.

  8. X-ray diagnostics. Oral and intravenous cholegraphy

    International Nuclear Information System (INIS)

    1981-04-01

    The standard deals with oral and intravenous cholegraphy. It includes information on indications, contraindications, prerequisites and preparations as well as on application and appropriate dosage of contrast media. Parameters on focussing, imaging conditions and on the program of taking radiographies are outlined. The necessity of special examinations according to findings as well as measures concerning radiation protection and hygiene are presented

  9. Design of tablets for the delayed and complete release of poorly water-soluble weak base drugs using SBE7M-β-CD as a solubilizing agent.

    Science.gov (United States)

    Rao, Venkatramana M; Zannou, Erika A; Stella, Valentino J

    2011-04-01

    The challenge of designing a delayed-release oral dosage form is significantly increased when the drug substance is poorly water soluble. This manuscript describes the design and characterization of a novel controlled-release film-coated tablet for the pH-triggered delayed and complete release of poorly water-soluble weak base drugs. Delivery of weak bases is specifically highlighted with the use of dipyridamole and prazosin as model compounds. Tailored delayed release is achieved with a combination of an insoluble but semipermeable polymer and an enteric polymer, such as cellulose acetate and hydroxypropyl cellulose phthalate, respectively, as coatings. The extent of the time lag prior to complete release depends on the film-coating composition and thickness. Complete release is achieved by the addition of a cyclodextrin, namely SBE7M-β-CD with or without a pH modifier added to the tablet core to ensure complete solubilization and release of the drug substance. The film-coating properties allow the complex formation/solubilization to occur in situ. Additionally, the drug release rate can be modulated on the basis of the cyclodextrin to drug molar ratio. This approach offers a platform technology for delayed release of potent but poorly soluble drugs and the release can be modulated by adjusting the film-coating composition and thickness and/or the cyclodextrin and pH modifier, if necessary. Copyright © 2010 Wiley-Liss, Inc.

  10. [Construction of multiple drug release system based on components of traditional Chinese medicine].

    Science.gov (United States)

    Liu, Dan; Jia, Xiaobin; Yu, Danhong; Zhang, Zhenhai; Sun, E

    2012-08-01

    With the development of the modernization drive of traditional Chinese medicine (TCM) preparations, new-type TCM dosage forms research have become a hot spot in the field. Because of complexity of TCM components as well as uncertainty of material base, there is still not a scientific system for modern TCM dosage forms so far. Modern TCM preparations inevitably take the nature of the multi-component and the general function characteristics of multi-link and multi-target into account. The author suggests building a multiple drug release system for TCM using diverse preparation techniques and drug release methods at levels on the basis the nature and function characteristics of TCM components. This essay expounds elaborates the ideas to build the multiple traditional Chinese medicine release system, theoretical basis, preparation techniques and assessment system, current problems and solutions, in order to build a multiple TCM release system with a view of enhancing the bioavailability of TCM components and provide a new form for TCM preparations.

  11. Does switching from oral extended-release methylphenidate to the methylphenidate transdermal system affect health-related quality-of-life and medication satisfaction for children with attention-deficit/hyperactivity disorder?

    Directory of Open Access Journals (Sweden)

    Landgraf Jeanne M

    2009-12-01

    Full Text Available Abstract Background To evaluate health-related quality of life (HRQL and medication satisfaction after switching from a stable dose of oral extended-release methylphenidate (ER-MPH to methylphenidate transdermal system (MTS via a dose-transition schedule in children with attention-deficit/hyperactivity disorder (ADHD. Methods In a 4-week, multisite, open-label study, 171 children (164 in the intent-to-treat [ITT] population aged 6-12 years diagnosed with ADHD abruptly switched from a stable dose of oral ER-MPH to MTS nominal dosages of 10, 15, 20, and 30 mg using a predefined dose-transition schedule. Subjects remained on the scheduled dose for the first week, after which the dose was then titrated to an optimal effect. The ADHD Impact Module-Children (AIM-C, a disease-specific validated HRQL survey instrument measuring child and family impact, was used to assess the impact of ADHD symptoms on the lives of children and their families at baseline and study endpoint. Satisfaction with MTS use was assessed via a Medication Satisfaction Survey (MSS at study endpoint. Both the AIM-C and MSS were completed by a caregiver (parent/legally authorized representative. Tolerability was monitored by spontaneous adverse event (AE reporting. Results AIM-C child and family HRQL mean scores were above the median possible score at baseline and were further improved at endpoint across all MTS doses. Similar improvements were noted for behavior, missed doses, worry, and economic impact AIM-C item scores. Overall, 93.8% of caregivers indicated a high level of satisfaction with their child's use of the study medication. The majority of treatment-emergent AEs (> 98% were mild to moderate in intensity, and the most commonly reported AEs included headache, decreased appetite, insomnia, and abdominal pain. Seven subjects discontinued the study due to intolerable AEs (n = 3 and application site reactions (n = 4. Conclusion This study demonstrates that MTS, when carefully

  12. The Active Metabolite of Warfarin (3'-Hydroxywarfarin) and Correlation with INR, Warfarin and Drug Weekly Dosage in Patients under Oral Anticoagulant Therapy: A Pharmacogenetics Study

    Science.gov (United States)

    Talarico, Anna; Fabbri, Matteo; Bertocco, Cesare; Vigliano, Marco; Moratelli, Stefano; Cuneo, Antonio; Serino, Maria Luisa; Avato, Francesco Maria

    2016-01-01

    Objectives Warfarin oral anticoagulant therapy (OAT) requires regular and frequent drug adjustment monitored by INR. Interindividual variability, drug and diet interferences, and genetics (VKORC1 and CYP2C9) make the maintenance/reaching of stable INR a not so easy task. HPLC assessment of warfarin/enantiomers was suggested as a valid monitoring-tool along with INR, but definite results are still lacking. We evaluated possible correlations between INR, warfarin/3’-hydroxywarfarin, and drug weekly dosage aimed at searching novel alternatives to OAT monitoring. VKORC1/CYP2C9 pharmacogenetics investigation was performed to account for the known influence on warfarin homeostasis. Methods 133 OAT patients were recruited and assessed for warfarin/3’-hydroxywarfarin serum levels (HPLC), INR, and VKORC1 and CYP2C9 genotypes. A subgroup of 52 patients were monitored in detail (5 consecutive controls; c0-c4) till the target INR was reached. Correlation analyses were performed in both groups Results In the whole OAT group both warfarin and 3’-hydroxywarfarin correlate with INR at comparable degree (r2 = 0.0388 and 0.0362 respectively). Conversely, warfarin weekly dosage better correlates with warfarin than with 3’-hydroxywarfarin (r2 = 0.0975 and r2 = 0.0381 respectively), but considering together warfarin plus 3’-hydroxywarfarin the correlation strongly increased (r2 = 0.1114; pwarfarin (r2 = 0.2157 and r2 = 0.0549; p = 0.0005 and p = 0.0944 respectively) seeming less affected by drug adjustments in the subgroup of 52 patients who started OAT. The multivariate analyses aimed at estimating the true contribution of 3’-hydroxywarfarin on INR value ascribed it the unique significant value (p = 0.0021) in spite of warfarin who lost association. The pharmacogenetics studies confirmed that patients carrying the VKORC1 variant-allele required lower warfarin maintenance dosage and that the combination of VKORC1 and CYP2C9 yielded a warfarin responsive index (WRI

  13. Release of Water Soluble Drugs from Dynamically Swelling POLY(2-HYDROXYETHYL Methacrylate - CO - Methacrylic Acid) Hydrogels.

    Science.gov (United States)

    Kou, Jim Hwai-Cher

    In this study, ionizable copolymers of HEMA and methacrylic acid (MA) are investigated for their potential use in developing pH dependent oral delivery systems. Because of the MA units, these gels swell extensively at high pH. Since solute diffusion in the hydrophilic polymers depends highly on the water content of the matrix, it is anticipated that the release rate will be modulated by this pH induced swelling. From a practical point of view, the advantage of the present system is that one can minimize drug loss in the stomach and achieve a programmed release in intestine. This approach is expected to improve delivery of acid labile drugs or drugs that cause severe gastrointestinal side effects. This work mainly focuses on the basic understanding of the mechanism involved in drug release from the poly(HEMA -co- MA) gels, especially under dynamic swelling conditions. Equilibrium swelling is first characterized since water content is the major determinant of transport properties in these gels. Phenylpropanolamine (PPA) is chosen as the model drug for the release study and its diffusion characteristics in the gel matrix determined. The data obtained show that the PPA diffusivity follows the free volume theory of Yasuda, which explains the accelerating effect of swelling on drug release. A mathematical model based on a diffusion mechanism has been developed to describe PPA release from the swelling gels. Based on this model, several significant conclusions can be drawn. First, the release rate can be modulated by the aspect ratio of the cylindrical geometry, and this has a practical implication in dosage form design. Second, the release rate can be lowered quite considerably if the dimensional increase due to swelling is significant. Consequently, it is the balance between the drug diffusivity increase and the gel dimensional growth that determines the release rate from the swelling matrix. Third, quasi-steady release kinetics, which are characteristic of swelling

  14. Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

    Science.gov (United States)

    Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

    2015-05-01

    The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  15. Controlled release systems containing solid dispersions: strategies and mechanisms.

    Science.gov (United States)

    Tran, Phuong Ha-Lien; Tran, Thao Truong-Dinh; Park, Jun Bom; Lee, Beom-Jin

    2011-10-01

    In addition to a number of highly soluble drugs, most new chemical entities under development are poorly water-soluble drugs generally characterized by an insufficient dissolution rate and a small absorption window, leading to the low bioavailability. Controlled-release (CR) formulations have several potential advantages over conventional dosage forms, such as providing a uniform and prolonged therapeutic effect to improve patient compliance, reducing the frequency of dosing, minimizing the number of side effects, and reducing the strength of the required dose while increasing the effectiveness of the drug. Solid dispersions (SD) can be used to enhance the dissolution rate of poorly water-soluble drugs and to sustain the drug release by choosing an appropriate carrier. Thus, a CR-SD comprises both functions of SD and CR for poorly water-soluble drugs. Such CR dosage forms containing SD provide an immediately available dose for an immediate action followed by a gradual and continuous release of subsequent doses to maintain the plasma concentration of poorly water-soluble drugs over an extended period of time. This review aims to summarize all currently known aspects of controlled release systems containing solid dispersions, focusing on the preparation methods, mechanisms of action and characterization of physicochemical properties of the system.

  16. Qualitative analysis of controlled release ciprofloxacin/carbopol 934 mucoadhesive suspension

    Directory of Open Access Journals (Sweden)

    Subhashree Sahoo

    2011-01-01

    Full Text Available Mucoadhesive polymeric (carbopol 934 suspension of ciprofloxacin was prepared by ultrasonication and optimized with the aim of developing an oral controlled release gastro-retentive dosage form. The qualitative analysis of the formulation was performed by fourier transform infrared spectroscopy (FTIR, Raman spectroscopy, X-ray powder diffraction (XRD, and scanning electron microscopy (SEM analyses. FTIR (400 cm-1 to 4000 cm-1 region and Raman (140 to 2400 cm-1 region Spectroscopic studies were carried out and the spectra were used for interpretation. XRD data of pure drug, polymer and the formulation were obtained using a powder diffractometer scanned from a Bragg′s angle (2q of 10° to 70°. The dispersion of the particle was observed using SEM techniques. The particle size distribution and aspect ratio of particles in the polymeric suspension were obtained from SEM image analysis. The results from FTIR and Raman spectroscopic analyses suggested that, in formulation, the carboxylic groups of ciprofloxacin and hydroxyl groups of C934 undergo a chemical interaction leading to esterification and hydrogen bonding. The XRD data suggested that the retention of crystalline nature of ciprofloxacin in the formulation would lead to increase in stability and drug loading; decrease in solubility; and delay in release of the drug from polymeric suspension with better bioavailability and penetration capacity. The SEM image analysis indicated that, in the formulation maximum particles were having aspect ratio from 2 to 4 and standard deviation was very less which provided supporting evidences for homogeneous, uniformly dispersed, stable controlled release ciprofloxacin suspension which would be pharmaceutically acceptable.

  17. Differential pharmacokinetics of diclofenac potassium for oral solution vs immediate-release tablets from a randomized trial: effect of fed and fasting conditions.

    Science.gov (United States)

    Chen, Cuiping; Bujanover, Shay; Kareht, Stephanie; Rapoport, Alan M

    2015-02-01

    To compare the pharmacokinetics of, and food effect on, diclofenac potassium delivered as an oral solution vs an immediate-release tablet. Diclofenac potassium for oral solution is the only nonsteroidal anti-inflammatory drug approved as monotherapy for the acute treatment of migraine attacks with or without aura in adults 18 years of age or older. It is formulated with potassium bicarbonate as a buffering agent to raise the pH and consequently increase the aqueous solubility of diclofenac in the acidic environment of the stomach following oral administration. The dosage is 50 mg of powdered diclofenac potassium dissolved in 1 to 2 ounces (30 to 60 mL) of water prior to administration, with dosing time in relation to food intake not specified - this was the case for the pivotal efficacy and safety trials in subjects with acute migraine attacks in which the primary endpoints were achieved. For acute treatment of migraine attacks, rapid onset of pain relief is desirable and is likely related to a rapid appearance of an effective concentration of the drug in the systemic circulation. The rate at which an orally administered drug reaches the blood is affected by both its formulation and the presence of food in the stomach. The present study was designed to investigate the pharmacokinetics of 2 formulations of diclofenac potassium, an immediate-release tablet and an oral solution, and to ascertain the effect of food. This was an open-label, randomized, single-center, crossover trial in healthy volunteers. Subjects were randomized using computer-generated list to 1:1:1:1 ratio. They received a single 50-mg dose of diclofenac potassium in 4 sequences (ABCD, BADC, CDBA, and DCAB) during each of the 4 treatment periods. The 4 treatments were: A, oral solution fasting; B, tablet fasting; C, oral solution fed; and D, tablet fed. There was a ≥7-day washout period between dosing. Blood samples for pharmacokinetic analysis were taken for up to 12 hours post-dose and

  18. Detection time for THC in oral fluid after frequent cannabis smoking.

    Science.gov (United States)

    Andås, Hilde T; Krabseth, Hege-Merete; Enger, Asle; Marcussen, Bjarne N; Haneborg, An-Magritt; Christophersen, Asbjørg S; Vindenes, Vigdis; Øiestad, Elisabeth L

    2014-12-01

    The use of oral fluid for detecting drugs of abuse has become increasingly more frequent. Few studies have, however, investigated the detection times for drugs of abuse in oral fluid, compared with that of in urine or in blood. Cannabis is the world's most widely used drug of abuse, and the detection times for cannabis, in different types of matrixes, are therefore important information to the laboratories or institutions performing and evaluating drugs of abuse analyses. It is well known that frequent use of high dosages of cannabis, for longer periods of time, might lead to prolonged detection times for THC-COOH in urine. Cannabis intake is detected in oral fluid as THC, and a positive finding is considered to be a result of recent smoking, although some studies have already reported longer detection times. The aim of this study was to investigate the detection time for THC in oral fluid, collected from drug addicts admitted for detoxification. Findings in oral fluid were compared with findings in urine, among 26 patients admitted to a closed detoxification unit. The study, being the first in doing so, describes the concentration-time profiles for THC in oral fluid among chronic cannabis users, during monitored abstinence, using the Intercept collection kit. The study also includes the concentration-time profiles for creatinine-corrected THC-COOH ratios in urine samples, included to monitor for the possibility of new intakes. THC was detected in oral fluid collected from 11 of the 26 patients in the study. The elimination curves for THC in oral fluid revealed that negative samples could be interspersed among positive samples several days after cessation, whereas the THC-COOH concentrations in urine were decreasing. THC was, in this study, detected in oral fluid for up to 8 days after admission. The study shows that frequent use of high dosages of cannabis may lead to prolonged detection times, and that positive samples can be interspersed among negative samples

  19. Potential hazards due to food additives in oral hygiene products.

    Science.gov (United States)

    Tuncer Budanur, Damla; Yas, Murat Cengizhan; Sepet, Elif

    2016-01-01

    Food additives used to preserve flavor or to enhance the taste and appearance of foods are also available in oral hygiene products. The aim of this review is to provide information concerning food additives in oral hygiene products and their adverse effects. A great many of food additives in oral hygiene products are potential allergens and they may lead to allergic reactions such as urticaria, contact dermatitis, rhinitis, and angioedema. Dental practitioners, as well as health care providers, must be aware of the possibility of allergic reactions due to food additives in oral hygiene products. Proper dosage levels, delivery vehicles, frequency, potential benefits, and adverse effects of oral health products should be explained completely to the patients. There is a necessity to raise the awareness among dental professionals on this subject and to develop a data gathering system for possible adverse reactions.

  20. Safety and tolerability of flexible dosages of prolonged-release OROS methylphenidate in adults with attention-deficit/hyperactivity disorder

    Directory of Open Access Journals (Sweden)

    Jan K Buitelaar

    2009-08-01

    Full Text Available Jan K Buitelaar1, J Antoni Ramos-Quiroga2, Miguel Casas2, J J Sandra Kooij3, Asko Niemelä4, Eric Konofal5, Joachim Dejonckheere6, Bradford H Challis7, Rossella Medori81Department of Psychiatry, University Medical Center, St. Radboud and Karakter Child and Adolescent Psychiatry University Center, Nijmegen, The Netherlands; 2Department of Psychiatry, Hospital Universitari Vall d’Hebron and Department of Psychiatry and Legal Medicine, Universitat Autònoma de Barcelona, Barcelona, Spain; 3PsyQ, Psycho-Medical Programs, Program Adult ADHD, Den Haag, The Netherlands; 4Oulu University Hospital, Department of Psychiatry, Oulu, Finland; 5Groupe Hospitalier Pitie-Salpetriere, Paris, France; 6SGS Life Sciences, Mechelen, Belgium; 7Johnson & Johnson Pharmaceutical Research and Development, Titusville, NJ, USA; 8Janssen-Cilag EMEA, Neuss, GermanyAbstract: The osmotic release oral system (OROS methylphenidate formulation is a prolonged-release medication for the treatment of attention-deficit/hyperactivity disorder (ADHD in children, adolescents, and adults. We conducted a seven-week open-label extension of a double-blind study to assess the safety and tolerability of OROS methylphenidate in a flexible dose regimen (18–90 mg daily for the treatment of adults diagnosed with ADHD (N = 370. Medication was adjusted to optimize efficacy and tolerability for each patient. Adverse events, vital signs, and laboratory parameters were assessed. Most patients (337; 91% completed the seven-week treatment and the final dispensed dose was 18 mg (8%, 36 mg (29%, 54 mg (34%, 72 mg (20%, or 90 mg (9%. Adverse events were reported in 253 (68% patients and most were mild or moderate in severity; most frequently reported included headache (17%, decreased appetite (13%, and insomnia (11%. Adverse events were rarely serious (<1%; 2/370. Small mean increases in systolic and diastolic blood pressure (both 2.4 mmHg and pulse (3.2 bpm were observed. Body weight decreased

  1. Buccal bioadhesive drug delivery--a promising option for orally less efficient drugs.

    Science.gov (United States)

    Sudhakar, Yajaman; Kuotsu, Ketousetuo; Bandyopadhyay, A K

    2006-08-10

    Rapid developments in the field of molecular biology and gene technology resulted in generation of many macromolecular drugs including peptides, proteins, polysaccharides and nucleic acids in great number possessing superior pharmacological efficacy with site specificity and devoid of untoward and toxic effects. However, the main impediment for the oral delivery of these drugs as potential therapeutic agents is their extensive presystemic metabolism, instability in acidic environment resulting into inadequate and erratic oral absorption. Parenteral route of administration is the only established route that overcomes all these drawbacks associated with these orally less/inefficient drugs. But, these formulations are costly, have least patient compliance, require repeated administration, in addition to the other hazardous effects associated with this route. Over the last few decades' pharmaceutical scientists throughout the world are trying to explore transdermal and transmucosal routes as an alternative to injections. Among the various transmucosal sites available, mucosa of the buccal cavity was found to be the most convenient and easily accessible site for the delivery of therapeutic agents for both local and systemic delivery as retentive dosage forms, because it has expanse of smooth muscle which is relatively immobile, abundant vascularization, rapid recovery time after exposure to stress and the near absence of langerhans cells. Direct access to the systemic circulation through the internal jugular vein bypasses drugs from the hepatic first pass metabolism leading to high bioavailability. Further, these dosage forms are self-administrable, cheap and have superior patient compliance. Developing a dosage form with the optimum pharmacokinetics is a promising area for continued research as it is enormously important and intellectually challenging. With the right dosage form design, local environment of the mucosa can be controlled and manipulated in order to

  2. Association between oral manifestations and inhaler use in asthmatic and chronic obstructive pulmonary disease patients

    Directory of Open Access Journals (Sweden)

    Bhargavi Krishna Ayinampudi

    2016-01-01

    Full Text Available Objectives: To examine the association between oral manifestations and type, frequency and duration of inhaler usage, also type and dosage of medication used in asthmatic and chronic obstructive pulmonary disease (COPD patients. Materials and Methods: A cross-sectional study was conducted on 250 patients of both sexes suffering from asthma and COPD who were using inhalers. Frequency of oral manifestation seen on the tongue, buccal mucosa, teeth, periodontium, palate, floor of the mouth, lips, and xerostomia in inhaler users depending on the type of inhaler, type and dosage of medication, frequency and duration of use of inhaler were examined. Chi-square test was used for statistical analysis and P 0.05. Gingivitis/gingival enlargement (53.6% and 51.5% was almost similar but periodontitis was higher in those using >500 μg. Significant association (P < 0.05 was observed with duration <1 year; oral manifestations seen were taste alterations (53.2% in tongue, ulcerations (63.6% in the buccal mucosa, teeth affected (87%, gingivitis/gingival enlargement (66.2%, and xerostomia (89.6%. Conclusions: As asthmatics and COPD patients are at a higher risk of developing oral diseases during inhalation therapy, it is necessary to educate patients on proper oral health care and maintenance.

  3. Toxoplasma gondii oral infection induces intestinal inflammation and retinochoroiditis in mice genetically selected for immune oral tolerance resistance.

    Directory of Open Access Journals (Sweden)

    Raul Ramos Furtado Dias

    Full Text Available Toxoplasmosis is a worldwide disease with most of the infections originating through the oral route and generates various pathological manifestations, ranging from meningoencephalitis to retinochoroiditis and inflammatory bowel disease. Animal models for these pathologies are scarce and have limitations. We evaluated the outcome of Toxoplasma gondii oral infection with 50 or 100 cysts of the ME-49 strain in two lines of mice with extreme phenotypes of susceptibility (TS or resistance (TR to immune oral tolerance. Therefore, the aim of this study was to evaluate the behaviour of TS and TR mice, orally infected by T. gondii, and determine its value as a model for inflammatory diseases study. Mortality during the acute stage of the infection for TR was 50% for both dosages, while 10 and 40% of the TS died after infection with these respective dosages. In the chronic stage, the remaining TS succumbed while TR survived for 90 days. The TS displayed higher parasite load with lower intestinal inflammation and cellular proliferation, notwithstanding myocarditis, pneumonitis and meningoencephalitis. TR presented massive necrosis of villi and crypt, comparable to inflammatory bowel disease, with infiltration of lymphoid cells in the lamina propria of the intestines. Also, TR mice infected with 100 cysts presented intense cellular infiltrate within the photoreceptor layer of the eyes, changes in disposition and morphology of the retina cell layers and retinochoroiditis. During the infection, high levels of IL-6 were detected in the serum of TS mice and TR mice presented high amounts of IFN-γ and TNF-α. Both mice lineages developed different disease outcomes, but it is emphasized that TR and TS mice presented acute and chronic stages of the infection, demonstrating that the two lineages offer an attractive model for studying toxoplasmosis.

  4. Toxoplasma gondii Oral Infection Induces Intestinal Inflammation and Retinochoroiditis in Mice Genetically Selected for Immune Oral Tolerance Resistance

    Science.gov (United States)

    Dias, Raul Ramos Furtado; de Carvalho, Eulógio Carlos Queiroz; Leite, Carla Cristina da Silva; Tedesco, Roberto Carlos; Calabrese, Katia da Silva; Silva, Antonio Carlos; DaMatta, Renato Augusto; de Fatima Sarro-Silva, Maria

    2014-01-01

    Toxoplasmosis is a worldwide disease with most of the infections originating through the oral route and generates various pathological manifestations, ranging from meningoencephalitis to retinochoroiditis and inflammatory bowel disease. Animal models for these pathologies are scarce and have limitations. We evaluated the outcome of Toxoplasma gondii oral infection with 50 or 100 cysts of the ME-49 strain in two lines of mice with extreme phenotypes of susceptibility (TS) or resistance (TR) to immune oral tolerance. Therefore, the aim of this study was to evaluate the behaviour of TS and TR mice, orally infected by T. gondii, and determine its value as a model for inflammatory diseases study. Mortality during the acute stage of the infection for TR was 50% for both dosages, while 10 and 40% of the TS died after infection with these respective dosages. In the chronic stage, the remaining TS succumbed while TR survived for 90 days. The TS displayed higher parasite load with lower intestinal inflammation and cellular proliferation, notwithstanding myocarditis, pneumonitis and meningoencephalitis. TR presented massive necrosis of villi and crypt, comparable to inflammatory bowel disease, with infiltration of lymphoid cells in the lamina propria of the intestines. Also, TR mice infected with 100 cysts presented intense cellular infiltrate within the photoreceptor layer of the eyes, changes in disposition and morphology of the retina cell layers and retinochoroiditis. During the infection, high levels of IL-6 were detected in the serum of TS mice and TR mice presented high amounts of IFN-γ and TNF-α. Both mice lineages developed different disease outcomes, but it is emphasized that TR and TS mice presented acute and chronic stages of the infection, demonstrating that the two lineages offer an attractive model for studying toxoplasmosis. PMID:25437299

  5. Mini-tablets versus pellets as promising multiparticulate modified release delivery systems for highly soluble drugs.

    Science.gov (United States)

    Gaber, Dina M; Nafee, Noha; Abdallah, Osama Y

    2015-07-05

    Whether mini-tablets (tablets, diameters ≤6mm) belong to single- or multiple-unit dosage forms is still questionable. Accordingly, Pharmacopoeial evaluation procedures for mini-tablets are lacking. In this study, the aforementioned points were discussed. Moreover, their potential for oral controlled delivery was assessed. The antidepressant venlafaxine hydrochloride (Vx), a highly soluble drug undergoing first pass effect, low bioavailability and short half-life was selected as a challenging payload. In an attempt to weigh up mini-tablets versus pellets as multiparticulate carriers, Vx-loaded mini-tablets were compared to formulated pellets of the same composition and the innovator Effexor(®)XR pellets. Formulations were prepared using various polymer hydrogels in the core and ethyl cellulose film coating with increasing thickness. Mini-tablets (diameter 2mm) showed extended Vx release (<60%, 8h). Indeed, release profiles comparable to Effexor(®)XR pellets were obtained. Remarkably higher coating thickness was required for pellets to provide equivalent retardation. Ethyl cellulose in the core ensured faster release due to polymer migration to the surface and pore formation in the coat. mini-tablets showed higher stability to pellets upon storage. Industrially speaking, mini-tablets proved to be superior to pellets in terms of manufacturing, product quality and economical aspects. Results point out the urgent need for standardized evaluation procedures for mini-tablets. Copyright © 2015. Published by Elsevier B.V.

  6. Optimization of caseinate-coated simvastatin-zein nanoparticles: improved bioavailability and modified release characteristics.

    Science.gov (United States)

    Ahmed, Osama A A; Hosny, Khaled M; Al-Sawahli, Majid M; Fahmy, Usama A

    2015-01-01

    The current study focuses on utilization of the natural biocompatible polymer zein to formulate simvastatin (SMV) nanoparticles coated with caseinate, to improve solubility and hence bioavailability, and in addition, to modify SMV-release characteristics. This formulation can be utilized for oral or possible depot parenteral applications. Fifteen formulations were prepared by liquid-liquid phase separation method, according to the Box-Behnken design, to optimize formulation variables. Sodium caseinate was used as an electrosteric stabilizer. The factors studied were: percentage of SMV in the SMV-zein mixture (X1), ethanol concentration (X2), and caseinate concentration (X3). The selected dependent variables were mean particle size (Y1), SMV encapsulation efficiency (Y2), and cumulative percentage of drug permeated after 1 hour (Y3). The diffusion of SMV from the prepared nanoparticles specified by the design was carried out using an automated Franz diffusion cell apparatus. The optimized SMV-zein formula was investigated for in vivo pharmacokinetic parameters compared with an oral SMV suspension. The optimized nanosized SMV-zein formula showed a 131 nm mean particle size and 89% encapsulation efficiency. In vitro permeation studies displayed delayed permeation characteristics, with about 42% and 85% of SMV cumulative amount released after 12 and 48 hours, respectively. Bioavailability estimation in rats revealed an augmentation in SMV bioavailability from the optimized SMV-zein formulation, by fourfold relative to SMV suspension. Formulation of caseinate-coated SMV-zein nanoparticles improves the pharmacokinetic profile and bioavailability of SMV. Accordingly, improved hypolipidemic activities for longer duration could be achieved. In addition, the reduced dosage rate of SMV-zein nanoparticles improves patient tolerability and compliance.

  7. Development and characterization of mucoadhesive buccal patches of salbutamol sulphate.

    Science.gov (United States)

    Patel, Rajesh Singh; Poddar, S S

    2009-01-01

    Mucoadhesive patch releasing the drug in the oral cavity at predetermined rate may present distinct advantages over traditional dosage forms such as tablets, gels and solutions. The present study was concerned with the preparation and evaluation of mucoadhesive buccal patches for the controlled systemic delivery of Salbutamol sulphate to avoid first pass hepatic metabolism. The developed patches were evaluated for the physicochemical, mechanical and drug release characteristics. The patches showed desired mechanical and physicochemical properties to withstand environment of oral cavity. The in-vitro release study showed that patches could deliver drug to the oral mucosa for a period of 7 h. the patches exhibited adequate stability when tested under accelerated conditions.

  8. Formulation of cefuroxime axetil oral suspension and investigation of its pharmaceutical properties

    OpenAIRE

    Valizadeh, Hadi; Farajnia, Aynoor; Zakeri-Milani, Parvin

    2011-01-01

    Purpose: Cefuroxime is the second generation cephalosporin, which its intravenous and oral dosage forms are available. Oral route is the selective method for administration of most of the drugs. The aim of this study was formulating ‘for oral’ cefuroxime axetil suspensions. Methods: Minitab (ver.15) was used to design the formulations containing 125 mg of cefuroxime in 5 ml vehicle. After selecting the acceptable preparations, physical stability tests and other tests such as dissolution rate,...

  9. Effect of Osmotic-Release Oral System Methylphenidate on Different Domains of Attention and Executive Functioning in Children with Attention-Deficit-Hyperactivity Disorder

    Science.gov (United States)

    Blum, Nathan J.; Jawad, Abbas F.; Clarke, Angela T.; Power, Thomas J.

    2011-01-01

    Aim: This study investigated whether components of attention and executive functioning improve when children with attention-deficit-hyperactivity disorder (ADHD) are treated with osmotic-release oral system (OROS) methylphenidate. Method: Thirty children (24 males, six females; mean age 8y 6mo, SD 1y 11mo; range 6y 5mo-12y 6mo) with ADHD combined…

  10. How Monte Carlo heuristics aid to identify the physical processes of drug release kinetics.

    Science.gov (United States)

    Lecca, Paola

    2018-01-01

    We implement a Monte Carlo heuristic algorithm to model drug release from a solid dosage form. We show that with Monte Carlo simulations it is possible to identify and explain the causes of the unsatisfactory predictive power of current drug release models. It is well known that the power-law, the exponential models, as well as those derived from or inspired by them accurately reproduce only the first 60% of the release curve of a drug from a dosage form. In this study, by using Monte Carlo simulation approaches, we show that these models fit quite accurately almost the entire release profile when the release kinetics is not governed by the coexistence of different physico-chemical mechanisms. We show that the accuracy of the traditional models are comparable with those of Monte Carlo heuristics when these heuristics approximate and oversimply the phenomenology of drug release. This observation suggests to develop and use novel Monte Carlo simulation heuristics able to describe the complexity of the release kinetics, and consequently to generate data more similar to those observed in real experiments. Implementing Monte Carlo simulation heuristics of the drug release phenomenology may be much straightforward and efficient than hypothesizing and implementing from scratch complex mathematical models of the physical processes involved in drug release. Identifying and understanding through simulation heuristics what processes of this phenomenology reproduce the observed data and then formalize them in mathematics may allow avoiding time-consuming, trial-error based regression procedures. Three bullet points, highlighting the customization of the procedure. •An efficient heuristics based on Monte Carlo methods for simulating drug release from solid dosage form encodes is presented. It specifies the model of the physical process in a simple but accurate way in the formula of the Monte Carlo Micro Step (MCS) time interval.•Given the experimentally observed curve of

  11. Sustained-release progesterone vaginal suppositories 1--development of sustained-release granule--.

    Science.gov (United States)

    Nakayama, Ayako; Sunada, Hisakazu; Okamoto, Hirokazu; Furuhashi, Kaoru; Ohno, Yukiko; Ito, Mikio

    2009-02-01

    Progesterone (P) is an important hormone for the establishment of pregnancy, and its administration is useful for luteal insufficiency. Considering the problems of commercially available oral and injection drugs, hospital-formulated vaginal suppositories are clinically used. However, since the half-life of P suppositories is short, it is difficult to maintain its constant blood concentration. To sustain drug efficacy and prevent side-effects, we are attempting to develop sustained-release suppositories by examining the degree of sustained-release of active ingredients. In this study, we examined the combinations of granulation methods and release systems for the preparation of sustained-release granules of P, and produced 13 types of sustained-release granules. We also examined the diameter, content, and dissolution of each type of granules, and confirmed that the sustained-release of all types of granules was satisfactory. Among the sustained-release granules, we selected granules with a content and a degree of sustained-release suitable for sustained-release suppositories.

  12. Low starting dosage of infliximab with possible escalating dosage in psoriatic arthritis gives the same treatment results as standard dosage of adalimumab or etanercept: results from the nationwide Icelandic ICEBIO registry

    Directory of Open Access Journals (Sweden)

    Gudbjornsson B

    2018-05-01

    Full Text Available Bjorn Gudbjornsson,1,2 Arni Jon Geirsson,3,4 Niels Steen Krogh5 1Centre for Rheumatology Research, University Hospital, Reykjavik, Iceland; 2Faculty of Medicine, University of Iceland, Reykjavik, Iceland; 3Department of Rheumatology, University Hospital, Reykjavik, Iceland; 4Laeknasetrid - Medical Clinic, University of Iceland, Reykjavik, Iceland; 5Zitelab Aps, Copenhagen, Denmark Objective: To explore differences in response to a low dosage regimen of infliximab with an escalating dosage in comparison to a standard dosage of etanercept and adalimumab in patients with psoriatic arthritis (PsA. Methods: Biologically naïve PsA patients who were beginning anti-TNF-α therapy were selected from the ICEBIO registry. Demographics and clinical differences were compared in four treatment groups: infliximab <4 mg/kg; infliximab >4 mg/kg; etanercept or adalimumab at baseline and on follow-up (6 and 12 months, last visit. The Kruskal–Wallis rank sum test was used for comparison of the groups and the Wilcoxon test to compare the two infliximab dosage regimens. Results: One hundred and eighty-five patients (61% female were identified; 84 patients received infliximab, 66 etanercept, and 35 adalimumab. A total of 19% of the patients treated with infliximab escalated their dosage ≥4 mg/kg. No significant differences were observed at baseline in respect to visual analog scale (VAS pain, VAS fatigue, Health Assessment Questionnaire, C-reactive protein (CRP, numbers of swollen or tender joints, or Disease Activity Score (DAS 28-CRP values. A similar treatment response was observed in all four treatment groups on follow-up. Conclusion: In respect to treatment effects, a low dosage of infliximab with possible escalating dosage is acceptable for the majority of PsA patients who are in need of biological treatment. Keywords: psoriatic arthritis, outcome, biological treatment, routine care, clinical nationwide registry

  13. Lipid-based formulations for oral administration of poorly water-soluble drugs

    DEFF Research Database (Denmark)

    Mu, Huiling; Holm, René; Müllertz, Anette

    2013-01-01

    Lipid-based drug delivery systems have shown great potentials in oral delivery of poorly water-soluble drugs, primarily for lipophilic drugs, with several successfully marketed products. Pre-dissolving drugs in lipids, surfactants, or mixtures of lipids and surfactants omits the dissolving....../dissolution step, which is a potential rate limiting factor for oral absorption of poorly water-soluble drugs. Lipids not only vary in structures and physiochemical properties, but also in their digestibility and absorption pathway; therefore selection of lipid excipients and dosage form has a pronounced effect...

  14. POTENTIAL HAZARDS DUE TO FOOD ADDITIVES IN ORAL HYGIENE PRODUCTS

    Directory of Open Access Journals (Sweden)

    Damla TUNCER-BUDANUR

    2016-04-01

    Full Text Available Food additives used to preserve flavor or to enhance the taste and appearance of foods are also available in oral hygiene products. The aim of this review is to provide information concerning food additives in oral hygiene products and their adverse effects. A great many of food additives in oral hygiene products are potential allergens and they may lead to allergic reactions such as urticaria, contact dermatitis, rhinitis, and angioedema. Dental practitioners, as well as health care providers, must be aware of the possibility of allergic reactions due to food additives in oral hygiene products. Proper dosage levels, delivery vehicles, frequency, potential benefits, and adverse effects of oral health products should be explained completely to the patients. There is a necessity to raise the awareness among dental professionals on this subject and to develop a data gathering system for possible adverse reactions.

  15. Correlation of ibuprofen bioavailability with gastrointestinal transit by scintigraphic monitoring of 171Er-labeled sustained-release tablets

    International Nuclear Information System (INIS)

    Parr, A.F.; Beihn, R.M.; Franz, R.M.; Szpunar, G.J.; Jay, M.

    1987-01-01

    External gamma scintigraphy was used to monitor the gastrointestinal (GI) transit of radiolabeled sustained-release tablets containing 800 mg ibuprofen in eight fasted healthy volunteers. Ibuprofen serum concentrations were determined from blood samples drawn sequentially over a 24-hr period. Serum concentrations and related parameters were correlated to the position of the dosage form in the GI tract from the scintiphotos. The sustained-release tablets were radiolabeled intact utilizing a neutron activation procedure, by incorporating 0.18% of 170 Er2O3 (enriched to greater than 96% 170 Er) into the bulk formulation. After manufacture of the final dosage forms, the tablets were irradiated in a neutron flux (4.4 x 10(13) n/cm2.sec) for 2 min, converting the stable 170 Er to radioactive 171 Er (t1/2 = 7.5 hr). Each tablet contained 50 microCi of 171 Er at the time of administration. The scintigraphy studies suggested that the greatest proportion of ibuprofen was absorbed from this dosage form while the tablet was in the large bowel. The dosage forms eroded slowly in the small bowel and appeared to lose their integrity in the large bowel. In vitro studies showed only minimal effects of the neutron irradiation procedure on the dosage form performance

  16. Determining S-1 dosage at hospitals prioritizing cancer chemotherapy

    International Nuclear Information System (INIS)

    Morimoto, Shigefumi; Kitada, Noriaki; Anami, Setsuko

    2008-01-01

    Although it is recommended that the standard S-1 dosage should be based on how large the body surface area is, an on-site setting of the appropriate dosage is often lower than the standard one, depending on the individual's condition and considering possible side effects and so, on. Here, we investigated usage conditions for S-1 as a part of field training for expert pharmacists at our hospital that performs total clinical treatments. Decreases in dosage per day for elderly patients were although the standard dosage is generally determined according to the amount of a patient's body surface. We conducted a retrospective survey with a total 90 patients by creating a tree-diagram to identify a reduction standard. It was found that the S-1 dosage was decreased when there were side effects, aggravation in performance status, decrease in kidney function, old age, combined injection chemotherapy, and a decrease in radiation therapy performance. The dosage decreases without such medical reasons were seen in only 4 of the 90 patients. At hospitals giving priority to chemotherapy, it became clear that appropriate treatment was promoted by decreasing. The individual target dosage on the basis of daily medical examination. (author)

  17. Candida albicans septicemia in a premature infant successfully treated with oral fluconazole

    DEFF Research Database (Denmark)

    Bodé, S; Pedersen-Bjergaard, Lars; Hjelt, K

    1992-01-01

    A premature male infant, birth-weight 1460 g, was treated successfully for a Candida albicans septicemia with orally administered fluconazole for 20 days. Dosage was 5 mg/kg/day. No side effects were seen. Fluconazole may present a major progress in treatment of invasive C. albicans infections...

  18. Intelligent system for improving dosage control

    Directory of Open Access Journals (Sweden)

    Fabio Cosme Rodrigues dos Santos

    2017-02-01

    Full Text Available Coagulation is one of the most important processes in a drinking-water treatment plant, and it is applied to destabilize impurities in water for the subsequent flocculation stage. Several techniques are currently used in the water industry to determine the best dosage of the coagulant, such as the jar-test method, zeta potential measurements, artificial intelligence methods, comprising neural networks, fuzzy and expert systems, and the combination of the above-mentioned techniques to help operators and engineers in the water treatment process. Current paper presents an artificial neural network approach to evaluate optimum coagulant dosage for various scenarios in raw water quality, using parameters such as raw water color, raw water turbidity, clarified and filtered water turbidity and a calculated Dose Rate to provide the best performance in the filtration process. Another feature in current approach is the use of a backpropagation neural network method to estimate the best coagulant dosage simultaneously at two points of the water treatment plant. Simulation results were compared to the current dosage rate and showed that the proposed system may reduce costs of raw material in water treatment plant.

  19. Poly(3-hydroxybutyrate) and Eudragit E microparticles: a release system to enhance the aqueous solubility of felodipine and simvastatin

    International Nuclear Information System (INIS)

    Bazzo, Giovana C.; Pezzini, Bianca R.; Zetola, Melissa; Wagner, Theodoro M.; Caetano, Daniela B.; Boch, Maura; Schmucker, Iara C.; Schucko, Sacha K.

    2009-01-01

    Poor water-soluble drugs are a problem for the development of oral solid dosage forms, since it has great potential for low bioavailability. Thus, release systems that promote the increase of aqueous solubility of these drugs are advantageous. This study aimed to evaluate the feasibility of incorporation of felodipine and simvastatin in polymeric microparticles, to improve the aqueous solubility of the drugs. Microparticles of poly(3-hydroxybutyrate) [PHB] and Eudragit E was prepared by emulsion - solvent evaporation technique and characterized as to morphology and encapsulation efficiency of the drugs. Particles with spherical shapes and high levels of drug encapsulated were obtained. There was a significant increase in aqueous solubility of felodipine and simvastatin after its incorporation into the polymeric microparticles. X-ray diffraction analysis showed the conversion of both drugs to amorphous form, which may have contributed to increased the solubility. (author)

  20. New applications to computerized tomography: analysis of solid dosage forms produced by pharmaceutical industry

    International Nuclear Information System (INIS)

    Oliveira Junior, Jose Martins de; Martins, Antonio Cesar Germano

    2009-01-01

    Full text: In recent years, computerized tomography (CT) has been used as a new probe to study solid dosage forms (tablets) produced by pharmaceutical industry. This new approach to study tablet and powder, or granulation, properties used in pharmaceutical industry is very suitable. First because CT can generate information that traditional technologies used in this kind of analysis can not, such as, density distribution of internal structures and tablet dimensions, pore size distribution, particle shape information, and also investigation of official and unofficial (counterfeit) copies of solid dosage forms. Second because CT is a nondestructive technique, allowing the use of tablets or granules in others analysis. In this work we discus how CT can be used to acquire and reconstruct internal microstructure of tablets and granules. CT is a technique that is based on attenuation of X-rays passing through matter. Attenuation depends on the density and atomic number of the material that is scanned. In this work, a micro-CT X-ray scanner (manufactured by the group of Applied Nuclear Physics at University of Sorocaba) was used to obtain three-dimensional images of the tablets and granules for nondestructive analysis. These images showed a non uniform density distribution of material inside some tablets, the morphology of some granules analyzed, the integrity of the liquid-filled soft-gelatin capsule and so on. It could also be observed that the distribution of different constituents presents an osmotic controlled-release dosage form. The present work shows that it is possible to use X-ray microtomography to obtain useful qualitative and quantitative information on the structure of pharmaceutical dosage forms. (author)

  1. Evaluation of students' knowledge about paediatric dosage calculations.

    Science.gov (United States)

    Özyazıcıoğlu, Nurcan; Aydın, Ayla İrem; Sürenler, Semra; Çinar, Hava Gökdere; Yılmaz, Dilek; Arkan, Burcu; Tunç, Gülseren Çıtak

    2018-01-01

    Medication errors are common and may jeopardize the patient safety. As paediatric dosages are calculated based on the child's age and weight, risk of error in dosage calculations is increasing. In paediatric patients, overdose drug prescribed regardless of the child's weight, age and clinical picture may lead to excessive toxicity and mortalities while low doses may delay the treatment. This study was carried out to evaluate the knowledge of nursing students about paediatric dosage calculations. This research, which is of retrospective type, covers a population consisting of all the 3rd grade students at the bachelor's degree in May, 2015 (148 students). Drug dose calculation questions in exam papers including 3 open ended questions on dosage calculation problems, addressing 5 variables were distributed to the students and their responses were evaluated by the researchers. In the evaluation of the data, figures and percentage distribution were calculated and Spearman correlation analysis was applied. Exam question on the dosage calculation based on child's age, which is the most common method in paediatrics, and which ensures right dosages and drug dilution was answered correctly by 87.1% of the students while 9.5% answered it wrong and 3.4% left it blank. 69.6% of the students was successful in finding the safe dose range, and 79.1% in finding the right ratio/proportion. 65.5% of the answers with regard to Ml/dzy calculation were correct. Moreover, student's four operation skills were assessed and 68.2% of the students were determined to have found the correct answer. When the relation among the questions on medication was examined, a significant relation (correlation) was determined between them. It is seen that in dosage calculations, the students failed mostly in calculating ml/dzy (decimal). This result means that as dosage calculations are based on decimal values, calculations may be ten times erroneous when the decimal point is placed wrongly. Moreover, it

  2. Cobalt release and complications resulting from the use of dental prostheses

    DEFF Research Database (Denmark)

    Al-Imam, Hiba; Benetti, Ana R.; Özhayat, Esben B.

    2016-01-01

    of the functional prostheses released cobalt, whereas this was observed in 24 of 32 non-functional prostheses. None of the patients had contact allergy to cobalt. Of the 66 patients, 11 showed signs of inflammation of the oral mucosa, 2 had oral candidiasis, 16 had ill-fitting prostheses, and all had insufficient...... oral hygiene. CONCLUSIONS: Dental prostheses released cobalt during the fabrication stages, but not 1-5 years after insertion. No allergic reactions were observed. Signs of inflammation were related to candidiasis, insufficient oral hygiene, and ill-fitting prostheses....

  3. A clinical evaluation of amlexanox oral adhesive pellicles in the treatment of recurrent aphthous stomatitis and comparison with amlexanox oral tablets: a randomized, placebo controlled, blinded, multicenter clinical trial

    Directory of Open Access Journals (Sweden)

    Gao Feng

    2009-05-01

    Full Text Available Abstract Background Amlexanox has been developed as a 5 percent topical oral paste for the treatment of patients with recurrent aphthous stomatitis (RAS in most European countries. However, it is not yet available in China and has not been generally accepted in clinical treatment. The aim of this study was to explore the effectiveness of amlexanox oral adhesive pellicles in the treatment of minor recurrent aphthous ulcers, and compare the results with those of amlexanox oral adhesive tablets in order to analyse the difference between the two dosage forms of amlexanox. Methods We performed a randomized, blinded, placebo-controlled, parallel, multicenter clinical study. A total of 216 patients with minor recurrent aphthous ulcers (MiRAU were recruited and randomized to amlexanox pellicles or placebo pellicles. Pellicles were consecutively applied four times per day, for five days. The size and pain level of ulcers were measured and recorded on treatment days 0, 4 and 6. Finally, the results were compared with those of our previous 104 cases treated with amlexanox tablets. Results Amlexanox oral adhesive pellicles significantly reduced ulcer size (P= 0.017 for day 4, P=0.038 for day 6 and alleviated ulcer pain (P=0.021 for day 4, P=0.036 for day 6. No significant difference was observed in the treatment effectiveness between the pellicle and tablet form of amlexanox. Conclusions Amlexanox oral adhesive pellicles are as effective and safe as amlexanox oral adhesive tablets in the treatment of MiRAU for this Chinese cohort. However, pellicles seem to be more comfortable to use when compared with the dosage form of tablets. Therefore, in clinical practice, amlexanox oral adhesive pellicles may be a better choice for RAS patients. Trials registration Nederlands Trial Register NTR1727.

  4. Safety of higher dosages of Viscum album L. in animals and humans - systematic review of immune changes and safety parameters

    Directory of Open Access Journals (Sweden)

    Kiene Helmut

    2011-08-01

    Full Text Available Abstract Background Viscum album L extracts (VAE, mistletoe and isolated mistletoe lectins (ML have immunostimulating properties and a strong dose-dependent cytotoxic activity. They are frequently used in complementary cancer treatment, mainly to improve quality of life, but partly also to influence tumour growth, especially by injecting VAE locally and in high dosage. The question is raised whether these higher dosages can induce any harm or immunosuppressive effects. Methods Systematic review of all experiments and clinical studies investigating higher dosages of VAE in animals and humans (Viscum album > 1 mg in humans corresponding to > 0.02 mg/kg in animals or ML > 1 ng/kg and assessing immune parameters or infections or adverse drug reactions. Results 69 clinical studies and 48 animal experiments reported application of higher doses of VAE or ML and had assessed immune changes and/or harm. In these studies, Viscum album was applied in dosages up to 1500 mg in humans and 1400 mg/kg in animals, ML was applied up to 6.4 μg/kg in humans and in animals up to 14 μg/kg subcutaneously, 50 μg/kg nasally and 500 μg/kg orally. A variety of immune parameters showed fluctuating or rising outcomes, but no immunosuppressive effect. Side effects consisted mainly of dose-dependent flu-like symptoms (FLS, fever, local reactions at the injection site and various mild unspecific effects. Occasionally, allergic reactions were reported. After application of high doses of recombinant ML, reversible hepatotoxicity was observed in some cases. Conclusions Application of higher dosages of VAE or ML is not accompanied by immunosuppression; altogether VAE seems to exhibit low risk but should be monitored by clinicians when applied in high dosages.

  5. Progesterone PLGA/mPEG-PLGA Hybrid Nanoparticle Sustained-Release System by Intramuscular Injection.

    Science.gov (United States)

    Xie, Bin; Liu, Yang; Guo, Yuting; Zhang, Enbo; Pu, Chenguang; He, Haibing; Yin, Tian; Tang, Xing

    2018-02-14

    To prepare sustained-release PLGA/mPEG-PLGA hybrid nanoparticles of progesterone (PRG), and evaluate the descending required administration dosage in vivo. PRG hybrid nanoparticles (PRG H-NPs) based on PLGA/mPEG-PLGA were compared with PRG nanoparticles (PRG-NPs) of pure PLGA as the matrix and PRG-oil solutions. Nanoparticles (NPs) were formed by the method of nanoemulsion, and the pharmacokinetics of the sustained-release PRG H-NPs in male Sprague dawley (SD) rats were investigated. The rats were randomly divided into four groups, each group received: single dose of PRG H-NPs (14.58 mg/kg, i.m.) and PRG-NPs (14.58 mg/kg, i.m.), repeated dosing for 7 days of PRG-oil (2.08 mg/kg, i.m.) solution (Oil-L) and a higher dosage of PRG-oil (6.24 mg/kg, i.m.) solution (Oil-H), respectively. In the pharmacokinetic test, the PRG H-NPs exhibited a comparatively good sustained-release effect against the PRG-NPs without mPEG-PLGA and PRG-oil solution. The pharmacokinetic parameters of the PRG H-NPs, PRG-NPs, Oil-L and Oil-H were AUC 0-t (ng·h·mL -1 ) 8762.1, 1546.1, 1914.5, and 12,138.9, t 1/2 (h)52.7, 44.1, 8.4 and 44.6 respectively. Owing to the modification of PEG, PRG H-NPs can act as safe delivery platforms for sustained-release of drugs with a lower dosage required.

  6. Dosage sensitivity shapes the evolution of copy-number varied regions.

    Directory of Open Access Journals (Sweden)

    Benjamin Schuster-Böckler

    2010-03-01

    Full Text Available Dosage sensitivity is an important evolutionary force which impacts on gene dispensability and duplicability. The newly available data on human copy-number variation (CNV allow an analysis of the most recent and ongoing evolution. Provided that heterozygous gene deletions and duplications actually change gene dosage, we expect to observe negative selection against CNVs encompassing dosage sensitive genes. In this study, we make use of several sources of population genetic data to identify selection on structural variations of dosage sensitive genes. We show that CNVs can directly affect expression levels of contained genes. We find that genes encoding members of protein complexes exhibit limited expression variation and overlap significantly with a manually derived set of dosage sensitive genes. We show that complexes and other dosage sensitive genes are underrepresented in CNV regions, with a particular bias against frequent variations and duplications. These results suggest that dosage sensitivity is a significant force of negative selection on regions of copy-number variation.

  7. Fabrication of ketoprofen controlled-release tablets using biopolymeric hydrophilic matrices: in-vitro studies

    International Nuclear Information System (INIS)

    Rashid, S.; Khan, B.A.; Khan, G.M.

    2017-01-01

    Ketoprofen is propionic acid derivative and belongs to the Non-Steroidal anti-inflammatory group of drugs. Due to the short half-life, dosage frequency, patient non-compliance and side effects such as gastrointestinal disturbance, peptic ulceration and gastro intest inal bleeding, it is considered to be good candidate for formulation into controlled release dosage forms. Directly compressed controlled released ( CR) tablets using Acrylic acid derivatives were prepared and evaluated. In-Vitro Physicochemical assessment of the formulated tablets were performed using different physicochemical, dimensional and quality control tests such as weight variation, thickness and diameter, hardness test, friability test, content uniformity, disintegration and dissolution testing. Results of all these tests were formed within acceptable range. The effect of carbomer polymers on the tablet characteristics, drug release rates, release patterns and release kinetics were investigated. The F2-metric technique was applied to compare dissolution profiles of ketoprofen and carbopol tablets with ketoprofen SR - tablets taken as standard preparation. Acrylic acid derivatives when used as polymers resulted in an extended release profile of about 12 h. Using Higuchi's model and the Korsmeyer equation, the drug release mechanism from the tablets was found to be an anomalous type involving diffusion and erosion. Controlled- release Ketoprofen tablets appear to be a good choice for the symptomatic treatment of rheumatoid arthritis and osteoarthritis. Convenient once-daily administration may help improve patient's compliance. (author)

  8. Effect of vitamin E on protein bound carbohydrate complexes in radiation treated oral squamous cell carcinoma patients

    International Nuclear Information System (INIS)

    Chitra, S.; Shyamala Devi, C.S.

    2008-01-01

    Serum glycoproteins were evaluated in oral squamous cell carcinoma patients treated with radiotherapy and also the effect of vitamin E was studied. Cell surface glycoconjugates are important parameters in the detection of malignancy. Thus, the objective of the present study is to evaluate the efficacy of vitamin E on glycoproteins in oral cavity cancer patients treated with radiotherapy. The study includes 26 age and sex matched normal healthy individuals and 26 patients with squamous cell carcinoma of oral cavity. These patients were divided into two groups, one for radiotherapy alone (at a dosage of 6000 cGy in five fractions per week for a period of six weeks) and the other for radiotherapy plus vitamin E supplementation (at a dosage of 400 IU/day of vitamin E) for the entire period of radiotherapy. Levels of hexose, hexosamine, fucose and sialic acid were increased in oral squamous cell carcinoma patients and a significant decrease was observed in radiation treated patients when compared to control. The levels of glycoconjugates were significantly decreased in radiation treated patients supplemented with vitamin E. This measurement may be useful in assessing disease progression and identifying patients resistant to therapy and a possible role of vitamin E on reduction in glycoconjugate levels of radiation treated oral squamous cell carcinoma patients. (author)

  9. Preparation and Characterization of a Gastric Floating Dosage Form of Capecitabine

    Directory of Open Access Journals (Sweden)

    Ehsan Taghizadeh Davoudi

    2013-01-01

    Full Text Available Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT. Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC, carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets’ floating lag time was determined to be 30–200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

  10. Preparation and characterization of a gastric floating dosage form of capecitabine.

    Science.gov (United States)

    Taghizadeh Davoudi, Ehsan; Ibrahim Noordin, Mohamed; Kadivar, Ali; Kamalidehghan, Behnam; Farjam, Abdoreza Soleimani; Akbari Javar, Hamid

    2013-01-01

    Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT). Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA) for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC), carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets' floating lag time was determined to be 30-200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

  11. 76 FR 27888 - Implantation or Injectable Dosage Form New Animal Drugs; Gonadotropin Releasing Factor-Diphtheria...

    Science.gov (United States)

    2011-05-13

    ... Factor-Diphtheria Toxoid Conjugate AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. [[Page... veterinary prescription use of gonadotropin releasing factor-diphtheria toxoid conjugate by subcutaneous... provides for the veterinary prescription use of IMPROVEST (gonadotropin releasing factor-diphtheria toxoid...

  12. Semi-quantitative prediction of a multiple API solid dosage form with a combination of vibrational spectroscopy methods.

    Science.gov (United States)

    Hertrampf, A; Sousa, R M; Menezes, J C; Herdling, T

    2016-05-30

    Quality control (QC) in the pharmaceutical industry is a key activity in ensuring medicines have the required quality, safety and efficacy for their intended use. QC departments at pharmaceutical companies are responsible for all release testing of final products but also all incoming raw materials. Near-infrared spectroscopy (NIRS) and Raman spectroscopy are important techniques for fast and accurate identification and qualification of pharmaceutical samples. Tablets containing two different active pharmaceutical ingredients (API) [bisoprolol, hydrochlorothiazide] in different commercially available dosages were analysed using Raman- and NIR Spectroscopy. The goal was to define multivariate models based on each vibrational spectroscopy to discriminate between different dosages (identity) and predict their dosage (semi-quantitative). Furthermore the combination of spectroscopic techniques was investigated. Therefore, two different multiblock techniques based on PLS have been applied: multiblock PLS (MB-PLS) and sequential-orthogonalised PLS (SO-PLS). NIRS showed better results compared to Raman spectroscopy for both identification and quantitation. The multiblock techniques investigated showed that each spectroscopy contains information not present or captured with the other spectroscopic technique, thus demonstrating that there is a potential benefit in their combined use for both identification and quantitation purposes. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. 77 FR 4227 - Implantation or Injectable Dosage Form New Animal Drugs; Gonadotropin Releasing Factor Analog...

    Science.gov (United States)

    2012-01-27

    ... Factor Analog-Diphtheria Toxoid Conjugate AGENCY: Food and Drug Administration, HHS. ACTION: Final rule... extends the slaughter interval for intact male swine injected with gonadotropin releasing factor analog...-322 for IMPROVEST (gonadotropin releasing factor analog-diphtheria toxoid conjugate) Sterile Solution...

  14. Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques

    DEFF Research Database (Denmark)

    Genina, Natalja; Fors, Daniela; Vakili, Hossein

    2012-01-01

    substrates: A (uncoated woodfree paper), B (triple-coated inkjet paper) and C (double-coated sheet fed offset paper) were used as porous model carriers for drug delivery. Active pharmaceutical ingredient (API) containing solutions were printed onto 1 cm × 1 cm substrate areas using an inkjet printer...

  15. Microbial quality of some herbal solid dosage forms

    African Journals Online (AJOL)

    STORAGESEVER

    2010-03-15

    Mar 15, 2010 ... Key words: Microbial quality, herbal, contamination, solid dosage form ... The type of dosage form, packaging, manufacturing and expiration dates of subject solid herbal .... According to WHO report (2002), Salmonella food.

  16. Parental genome dosage imbalance deregulates imprinting in Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Pauline E Jullien

    2010-03-01

    Full Text Available In mammals and in plants, parental genome dosage imbalance deregulates embryo growth and might be involved in reproductive isolation between emerging new species. Increased dosage of maternal genomes represses growth while an increased dosage of paternal genomes has the opposite effect. These observations led to the discovery of imprinted genes, which are expressed by a single parental allele. It was further proposed in the frame of the parental conflict theory that parental genome imbalances are directly mirrored by antagonistic regulations of imprinted genes encoding maternal growth inhibitors and paternal growth enhancers. However these hypotheses were never tested directly. Here, we investigated the effect of parental genome imbalance on the expression of Arabidopsis imprinted genes FERTILIZATION INDEPENDENT SEED2 (FIS2 and FLOWERING WAGENINGEN (FWA controlled by DNA methylation, and MEDEA (MEA and PHERES1 (PHE1 controlled by histone methylation. Genome dosage imbalance deregulated the expression of FIS2 and PHE1 in an antagonistic manner. In addition increased dosage of inactive alleles caused a loss of imprinting of FIS2 and MEA. Although FIS2 controls histone methylation, which represses MEA and PHE1 expression, the changes of PHE1 and MEA expression could not be fully accounted for by the corresponding fluctuations of FIS2 expression. Our results show that parental genome dosage imbalance deregulates imprinting using mechanisms, which are independent from known regulators of imprinting. The complexity of the network of regulations between expressed and silenced alleles of imprinted genes activated in response to parental dosage imbalance does not support simple models derived from the parental conflict hypothesis.

  17. Electrospun poly(ε-caprolactone) matrices containing silver sulfadiazine complexed with β-cyclodextrin as a new pharmaceutical dosage form to wound healing: preliminary physicochemical and biological evaluation.

    Science.gov (United States)

    Souza, Sarah Oliveira Lamas; Cotrim, Monique Alvarenga Pinto; Oréfice, Rodrigo Lambert; Carvalho, Suzana Gonçalves; Dutra, Jessyca Aparecida Paes; de Paula Careta, Francisco; Resende, Juliana Alves; Villanova, Janaina Cecília Oliveira

    2018-05-10

    Cooperation between researchers in the areas of medical, pharmaceutical and materials science has facilitated the development of pharmaceutical dosage forms that elicit therapeutic effects and protective action with a single product. In addition to optimizing pharmacologic action, such dosage forms provide greater patient comfort and increase success and treatment compliance. In the present work, we prepared semipermeable bioactive electrospun fibers for use as wound dressings containing silver sulfadiazine complexed with β-cyclodextrin in a poly(Ɛ-caprolactone) nanofiber matrix aiming to reduce the direct contact between silver and skin and to modulate the drug release. Wound dressings were prepared by electrospinning, and were subjected to ATR-FT-IR and TG/DTG assays to evaluate drug stability. The hydrophilicity of the fibrous nanostructure in water and PBS buffer was studied by goniometry. Electrospun fibers permeability and swelling capacity were assessed, and a dissolution test was performed. In vitro biological tests were realized to investigate the biological compatibility and antimicrobial activity. We obtained flexible matrices that were each approximately 1.0 g in weight. The electrospun fibers were shown to be semipermeable, with water vapor transmission and swelling indexes compatible with the proposed objective. The hydrophilicity was moderate. Matrices containing pure drug modulated drug release adequately during 24 h but presented a high hemolytic index. Complexation promoted a decrease in the hemolytic index and in the drug release but did not negatively impact antimicrobial activity. The drug was released predominantly by diffusion. These results indicate that electrospun PCL matrices containing β-cyclodextrin/silver sulfadiazine inclusion complexes are a promising pharmaceutical dosage form for wound healing.

  18. Oral bioavailability, efficacy and gastric tolerability of P2026, a novel nitric oxide-releasing diclofenac in rat.

    Science.gov (United States)

    Pathan, Asif R; Karwa, Manoj; Pamidiboina, Venu; Deshattiwar, Jagannath J; Deshmukh, Nitin J; Gaikwad, Parikshit P; Mali, Sunil V; Desai, Dattatraya C; Dhiman, Mini; Thanga Mariappan, T; Sharma, Somesh D; Satyam, Apparao; Nemmani, Kumar V S

    2010-08-01

    The present study was designed to evaluate, P2026 [(2-((2-(nitrooxy)ethyl)disulfanyl)ethyl 2-(2-(2,6-dichlorophenylamino)phenyl)acetate)], a novel NO (nitric oxide) donor prodrug of diclofenac for its ability to release NO and diclofenac, and whether P2026 provides advantage of improved activity/gastric tolerability over diclofenac. Oral bioavailability of P2026 was estimated from plasma concentration of diclofenac and nitrate/nitrite (NOx). Anti-inflammatory activity was evaluated in three different models of inflammation: acute (carrageenan-induced paw oedema), chronic (adjuvant-induced arthritis), and systemic (lipopolysaccharide-induced endotoxic shock). Gastric tolerability was evaluated from compound's propensity to cause gastric ulcers. P2026 exhibited dose-dependent diclofenac and NOx release. Similar to diclofenac, P2026 showed potent anti-inflammatory activity in acute and chronic model, whereas it improved activity in systemic model. Both diclofenac and P2026 inhibited gastric prostaglandin, but only diclofenac produced dose-dependent haemorrhagic ulcers. Thus, the results suggest that coupling of NO and diclofenac contribute to improved gastric tolerability while retaining the anti-inflammatory properties of diclofenac.

  19. Characterization and in vitro release studies of oral microbeads containing thiolated pectin–doxorubicin conjugates for colorectal cancer treatment

    Directory of Open Access Journals (Sweden)

    Kamonrak Cheewatanakornkool

    2017-11-01

    Full Text Available Novel oral microbeads were developed based on a biopolymer–drug conjugate of doxorubicin (DOX conjugated with thiolated pectin via reducible disulfide bonds. The microbeads were fabricated by ionotropic gelation with cations such as Al3+, Ca2+ and Zn2+. The results showed that using zinc acetate can produce the strongest microbeads with spherical shape. However, the microbeads prepared from thiolated pectin–DOX conjugate were very soft and irregular in shape. To produce more spherical microbeads with suitable strength, the native pectin was then added to the formulations. The particle size of the microbeads ranged from 0.87 to 1.14 mm. The morphology of the microbeads was characterized by optical and scanning electron microscopy. DOX was still in crystalline form when used in preparing the microbeads, as confirmed by powder X-ray diffractometry. Drug release profiles showed that the microbeads containing thiolated pectin–DOX conjugate exhibited reduction-responsive character; in reducing environments, the thiolated pectin–DOX conjugate could uncouple resulting from a cleavage of the disulfide linkers and consequently release the DOX. The best-fit release kinetics of the microbeads containing thiolated pectin–DOX conjugate, in the medium without reducing agent, fit the Korsmeyer–Peppas model while those in the medium with reducing agent fit a zero-order release model. These results suggested that the microbeads containing thiolated pectin–DOX conjugate may be a promising platform for cancer-targeted delivery of DOX, exploiting the reducing environment typically found in tumors.

  20. Intercavitary implants dosage calculation

    International Nuclear Information System (INIS)

    Rehder, B.P.

    The use of spacial geometry peculiar to each treatment for the attainment of intercavitary and intersticial implants dosage calculation is presented. The study is made in patients with intercavitary implants by applying a modified Manchester technique [pt

  1. 21 CFR 522.1660 - Oxytetracycline injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline injectable dosage forms. 522.1660 Section 522.1660 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 522.1660 Oxytetracycline injectable dosage forms. ...

  2. Comprehensive review on additives of topical dosage forms for drug delivery.

    Science.gov (United States)

    Garg, Tarun; Rath, Goutam; Goyal, Amit K

    2015-12-01

    Skin is the largest organ of the human body and plays the most important role in protecting against pathogen and foreign matter. Three important modes such as topical, regional and transdermal are widely used for delivery of various dosage forms. Among these modes, the topical dosage forms are preferred because it provides local therapeutic activity when applied to the skin or mucous membranes. Additives or pharmaceutical excipients (non-drug component of dosage form) are used as inactive ingredients in dosage form or tools for structuring dosage forms. The main use of topical dosage form additives are controling the extent of absorption, maintaining the viscosity, improving the stability as well as organoleptic property and increasing the bulk of the formulation. The overall goal of this article is to provide the clinician with information related to the topical dosage form additives and their current major applications against various diseases.

  3. Radiation dosage of various CT-methods in lung diagnostics

    International Nuclear Information System (INIS)

    Heinz-Peer, G.; Weninger, F.; Nowotny, R.; Herold, C.J.

    1996-01-01

    Introduction of the computed tomography index CTDI and the multiple scan average dose (MSAD) has led to standardization of the dose description in CT examinations. Despite the use of these dose parameters, many different dosages are reported in the literature for different CT methods. In addition, there is still a wide range of radiation dosimetry results reported for conventional CT, helical CT, and HRCT used in chest examinations. The variations in dosage are mainly due to difference in factors affecting the dose, i.e. beam geometry, beam quality, scanner geometry ('generation'), and operating parameters. In addition, CT dosimetry instrumentation and methodology make a contribution to dosages. Recent studies calculating differences in factors affecting dosage and CT dosimetry and using similar operating parameters, show similar results in CT dosimetry for conventional and helical CT. On the other hand, dosages for HRCT were greatly reduced. This was mainly caused by narrow beam collimation and increasing section spacing. (orig.) [de

  4. The biowaiver extension for BCS class III drugs: the effect of dissolution rate on the bioequivalence of BCS class III immediate-release drugs predicted by computer simulation.

    Science.gov (United States)

    Tsume, Yasuhiro; Amidon, Gordon L

    2010-08-02

    The Biopharmaceutical Classification System (BCS) guidance issued by the FDA allows waivers for in vivo bioavailability and bioequivalence studies for immediate-release (IR) solid oral dosage forms only for BCS class I drugs. However, a number of drugs within BCS class III have been proposed to be eligible for biowaivers. The World Health Organization (WHO) has shortened the requisite dissolution time of BCS class III drugs on their Essential Medicine List (EML) from 30 to 15 min for extended biowaivers; however, the impact of the shorter dissolution time on AUC(0-inf) and C(max) is unknown. The objectives of this investigation were to assess the ability of gastrointestinal simulation software to predict the oral absorption of the BCS class I drugs propranolol and metoprolol and the BCS class III drugs cimetidine, atenolol, and amoxicillin, and to perform in silico bioequivalence studies to assess the feasibility of extending biowaivers to BCS class III drugs. The drug absorption from the gastrointestinal tract was predicted using physicochemical and pharmacokinetic properties of test drugs provided by GastroPlus (version 6.0). Virtual trials with a 200 mL dose volume at different drug release rates (T(85%) = 15 to 180 min) were performed to predict the oral absorption (C(max) and AUC(0-inf)) of the above drugs. Both BCS class I drugs satisfied bioequivalence with regard to the release rates up to 120 min. The results with BCS class III drugs demonstrated bioequivalence using the prolonged release rate, T(85%) = 45 or 60 min, indicating that the dissolution standard for bioequivalence is dependent on the intestinal membrane permeability and permeability profile throughout the gastrointestinal tract. The results of GastroPlus simulations indicate that the dissolution rate of BCS class III drugs could be prolonged to the point where dissolution, rather than permeability, would control the overall absorption. For BCS class III drugs with intestinal absorption patterns

  5. Hydraulic Modular Dosaging Systems for Machine Drives

    Directory of Open Access Journals (Sweden)

    A. J. Kotlobai

    2005-01-01

    Full Text Available The justified principle of making modular dosaging systems for positive-displacement multimotor hydraulic drives used in running gear and technological equipment of mobile construction, road and agricultural machines makes it possible to synchronize motion of running parts. The examples of the realization of modular dosaging systems and an algorithm of their operation are given in the paper.

  6. Controlled release of 18-β-glycyrrhetic acid by nanodelivery systems increases cytotoxicity on oral carcinoma cell line

    Science.gov (United States)

    Cacciotti, Ilaria; Chronopoulou, Laura; Palocci, Cleofe; Amalfitano, Adriana; Cantiani, Monica; Cordaro, Massimo; Lajolo, Carlo; Callà, Cinzia; Boninsegna, Alma; Lucchetti, Donatella; Gallenzi, Patrizia; Sgambato, Alessandro; Nocca, Giuseppina; Arcovito, Alessandro

    2018-07-01

    The topical treatment for oral mucosal diseases is often based on products optimized for dermatologic applications; consequently, a lower therapeutic effect may be present. 18-β-glycyrrhetic acid (GA) is extracted from Glycirrhiza glabra. The first aim of this study was to test the cytotoxicity of GA on PE/CA-PJ15 cells. The second aim was to propose and test two different delivery systems, i.e. nanoparticles and fibers, to guarantee a controlled release of GA in vitro. We used chitosan and poly(lactic-co-glycolic) acid based nanoparticles and polylactic acid fibers. We tested both delivery systems in vitro on PE/CA-PJ15 cells and on normal human gingival fibroblasts (HGFs). The morphology of GA-loaded nanoparticles (GA-NPs) and fibers (GA-FBs) was investigated by electron microscopy and dynamic light scattering; GA release kinetics was studied spectrophotometrically. MTT test was used to assess GA cytotoxicity on both cancer and normal cells. Cells were exposed to different concentrations of GA (20–500 μmol l‑1) administered as free GA (GA-f), and to GA-NPs or GA-FBs. ROS production was evaluated using dichlorodihydrofluorescein as a fluorescent probe. Regarding the cytotoxic effect of GA on PE/CA-PJ15 cells, the lowest TC50 value was 200 μmol l‑1 when GA was added as GA-NPs. No cytotoxic effects were observed when GA was administered to HGFs. N-acetyl Cysteine reduced mortality induced by GA-f in PE/CA-PJ15 cells. The specific effect of GA on PE/CA-PJ15 cells is mainly due to the different sensitivity of cancer cells to ROS over-production; GA-NPs and GA-FBs formulations increase, in vitro, this toxic effect on oral cancer cells.

  7. Oral antimicrobials increase antimicrobial resistance in porcine E. coli--a systematic review.

    Science.gov (United States)

    Burow, E; Simoneit, C; Tenhagen, B-A; Käsbohrer, A

    2014-03-01

    Administration of antimicrobials to livestock increases the risk of antimicrobial resistance (AMR) in commensal bacteria. Antimicrobials in pig production are usually administered per pen via feed which implies treatment of sick alongside with healthy animals. The objective of this systematic literature review was to investigate the effect of orally administered antimicrobials on AMR in Escherichia coli of swine. Studies published in peer reviewed journals were retrieved from the international online databases ISI Web of Knowledge, PubMed, Scopus and the national electronic literature data base of Deutsches Institut für Medizinische Dokumentation und Information. The studies were assessed using the eligibility criteria English or German language, access to full paper version, defined treatment and control group (initial value or non-treatment) as well as administration and resistance testing of the same antimicrobial class. In the qualitative synthesis, only studies were included presenting the summary measures odds ratio or prevalence of resistance, the category of the applied antimicrobial and the dosage. An effect of the antimicrobial on AMR in E. coli was evaluated as an "increase", "no effect" or "decrease" if the odds or alternatively the prevalence ratio were >1.0, 1.0 or antimicrobial substance and dosage was missing in 4 and 5 of the 11 finally selected studies. The 36 identified trials were inhomogenous in usage and provision of information on sample size. Oral administration of antimicrobials increases the risk of AMR in E. coli from swine. There is however a lack of studies on the impact of dosage and longitudinal effects of treatment. The published studies have a number of issues concerning their scientific quality. More high quality research is needed to better address and quantifiy the effect of orally administered antimicrobials on AMR in swine. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. INDUCTION OF GONADAL MATURATION OF POND CULTURED MALE TIGER SHRIMP, Penaeus monodon WITH DIFFERENT DOSAGES OF GONADOTROPIN RELEASING HORMONE ANALOGUE AGAINST EYE STALK ABLATION

    Directory of Open Access Journals (Sweden)

    Asda Laining

    2016-12-01

    Full Text Available Very low naturally mating rate of pond-reared tiger shrimp broodstock is probably due to the slow maturation of the male stock. The aim of this study was to evaluate the salmon gonadotrophin releasing hormone analoque (sGnRHa in stimulating the gonadal maturation of male stock of pond-reared tiger shrimp. The treatments were three dosages of sGnRHa at 0.1 (OV-1, 0.2 (OV-2, and 0.3 (OV-3 mL/kg of shrimp weight and control was eye stalk ablation (AB. The sGnRHa was administered via injection three times with one week interval. Male stocks with average initial body weight of 82.1 g were randomly distributed into four of 10 m3 concrete tanks, 26 males for each tank. Variables observed were performances of spermatophores and profiles of amino acid and fatty acid of muscle of the male stocks. After induction, number of male maturing indicated by spermatophores releasing from terminal ampullas was higher in shrimp induced with OV-1 (80.8% compared to control which was only 46.1%. Furthermore, shrimp treated OV-2 had the highest spermatophore weight of 0.16 g compared to control (0.11 g and other two groups. Amino acid profiles improved as the dose of sGnRHa increased up to 0.2 mL/kg from 61.23% for ablated male becoming 71.27% for OV-2. Total fatty acid also tended to improve by increasing the dose of hormone injection, however, the ablated male had higher total fatty acid content than that of OV-1. The present finding demonstrated that the dose of sGnRHa to stimulate the gonadal maturation of pond-reared male tiger shrimp could be applied at range between 0.1-0.2 mL/kg of shrimp weight.

  9. Measurement of in-vivo dosage increase due to dental alloys during therapeutic irradiation of the mouth cavity

    International Nuclear Information System (INIS)

    Thilmann, C.; Mose, S.; Saran, F.; Schopohl, B.; Boettcher, H.D.

    1995-01-01

    The degree of dosage increase in the immediate surrounding of metallic dental materials was measured in an in-vivo study during therapeutic irradiation with 60 Co gamma rays in the area of mouth cavity of 11 patients. Measurements were carried out by thermoluminescent dosimetry at permamently fixed golden teeth and alloy specimens containing gold and palladium and amalgam. The following relative dodage values according to a simultanelusly measured reference value were measured at the surface of the different dental materials: 161% near fixed golden caps, 168% near the specimen containing gold in a high percentage, 133% near the specimen of palladium and 161% near the specimen of amalgam. The in vivo measured dosage increases due to metallic dental prosthesis are less than values obtained using back scatter arramgements for irradiating phantoms. Despite this, they could be of clinical relevance. Thus the usage of a mucous membrane protection during irradiation with 60 Co, as a means of preventing local lesions of the oral mucosa, due to dental alloys within the treatment volume remains inevitable. (orig.) [de

  10. Relationship between xerostomia and psychotropic drugs in patients with schizophrenia: evaluation using an oral moisture meter.

    Science.gov (United States)

    Okamoto, A; Miyachi, H; Tanaka, K; Chikazu, D; Miyaoka, H

    2016-12-01

    Patients with schizophrenia are most commonly treated with antipsychotic medications, often with the addition of anxiolytics. This study used an oral moisture meter to evaluate xerostomia in patients with schizophrenia taking typical and atypical antipsychotics, anxiolytics and non-psychotropic medications. Patients diagnosed with schizophrenia according to ICD-10 criteria in the Department of Psychiatry, Kitasato University East, and affiliated hospitals were studied. All patients were on psychotropic medications. Patients with diseases associated with xerostomia, such as Sjögren's syndrome I, were excluded. A total of 127 patients were enrolled. Mean oral moisture was 27·81 ± 2·27% (normal, ≥30·0%). A significant association was observed between objective oral moisture and the subjective sense of dry mouth. Multivariate analysis revealed a negative correlation between the number of antipsychotics and, especially, anxiolytics, and the degree of oral moisture. Drug dosages themselves were not significantly correlated with dry mouth. These findings suggest that objective oral moisture measurements show decreased moisture in patients on these medications and that the degree of moisture shows a greater negative correlation with the number, as opposed to the dosages, of psychotropic drugs administered. When patients with schizophrenia visit a dental clinic, it is important for the dentist to accurately assess the degree of oral moisture and to determine the medications being taken. Based on these findings of the association of polypharmacy with xerostomia, dentists are encouraged to inform the psychiatrist of the need to actively manage patients' xerostomia. © 2016 John Wiley & Sons Ltd.

  11. Preparation and evaluation of buccal bioadhesive films containing clotrimazole.

    Science.gov (United States)

    Singh, S; Jain, S; Muthu, M S; Tiwari, S; Tilak, R

    2008-01-01

    Buccal bioadhesive films, releasing topical drugs in the oral cavity at a slow and predetermined rate, provide distinct advantages over traditional dosage forms. The aim of present study was to prepare and evaluate buccal bioadhesive films of clotrimazole for oral candidiasis. The film was designed to release the drug at a concentration above the minimum inhibitory concentration for a prolonged period of time so as to reduce the frequency of administration of the available conventional dosage forms. The different proportions of sodium carboxymethylcellulose and carbopol 974P (CP 974P) were used for the preparation of films. Carbopol was used to incorporate the desired bioadhesiveness in the films. The films were prepared by solvent casting method and evaluated for bioadhesion, in vitro drug release and effectiveness against Candida albicans. In vitro drug release from the film was determined using a modified Franz diffusion cell while bioadhesiveness was evaluated with a modified two-arm balance using rabbit intestinal mucosa as a model tissue. Films containing 5% CP 974P of the total polymer were found to be the best with moderate swelling along with favorable bioadhesion force, residence time and in vitro drug release. The microbiological studies revealed that drug released from the film could inhibit the growth of C. albicans for 6 h. The drug release mechanism was found to follow non-Fickian diffusion.

  12. 21 CFR 526.1696 - Penicillin intramammary dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin intramammary dosage forms. 526.1696 Section 526.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS INTRAMAMMARY DOSAGE FORMS § 526.1696 Penicillin...

  13. Formulation, Development and Evaluation of delayed release capsules of Duloxetine Hydrochloride made of different Enteric Polymers

    OpenAIRE

    Pallavi Yerramsetty; J. Vijaya Ratna; Venkata Ramana Reddy; Praveen Kumar

    2012-01-01

    Delayed release systems have acquired a centre stage in the arena of pharmaceutical research and development. The present study involves formulation and evaluation of Duloxetine Hydrochloride delayed release capsules. Duloxetine Hydrochloride is an acid labile drug. It degrades in the acidic environment of the stomach thus leading to therapeutic inefficacy. Therefore it is necessary to bypass the acidic pH of the stomach which can be achieved by formulating delayed release dosage form by usin...

  14. The novel orally active guanylhydrazone CPSI-2364 prevents postoperative ileus in mice independently of anti-inflammatory vagus nerve signaling.

    Science.gov (United States)

    Wehner, S; Vilz, T O; Sommer, N; Sielecki, T; Hong, G S; Lysson, M; Stoffels, B; Pantelis, D; Kalff, J C

    2012-10-01

    Postoperative ileus (POI) is an iatrogenic complication of abdominal surgery, mediated by a severe inflammation of the muscularis externa (ME). Previously, we demonstrated that intravenous application of the tetravalent guanylhydrazone semapimod (CNI-1493) prevents POI, but the underlying mode of action could not definitively be confirmed. Herein, we investigated the effect of a novel orally active salt of semapimod (CPSI-2364) on POI in rodents and distinguished between its inhibitory peripheral and stimulatory central nervous effects on anti-inflammatory vagus nerve signaling. Distribution of radiolabeled orally administered CPSI-2364 was analyzed by whole body autoradiography and liquid scintillation counting. POI was induced by intestinal manipulation with or without preoperative vagotomy. CPSI-2364 was administered preoperatively via gavage in a dose- and time-dependent manner. ME specimens were assessed for p38-MAP kinase activity by immunoblotting, neutrophil extravasation, and nitric oxide production. Furthermore, in vivo gastrointestinal (GIT) and colonic transit were measured. Autoradiography demonstrated a near-exclusive detection of CPSI-2364 within the gastrointestinal wall and contents. Preoperative CPSI-2364 application significantly reduced postoperative neutrophil counts, nitric oxide release, GIT deceleration, and delay of colonic transit time, while intraoperatively administered CPSI-2364 failed to improve POI. CPSI-2364 also prevents postoperative neutrophil increase and GIT deceleration in vagotomized mice. Orally administered CPSI-2364 shows a near-exclusive dispersal in the gastrointestinal tract and effectively reduces POI independently of central vagus nerve stimulation. Its efficacy after single oral dosage affirms CPSI-2364 treatment as a promising strategy for prophylaxis of POI.

  15. Food, physiology and drug delivery.

    Science.gov (United States)

    Varum, F J O; Hatton, G B; Basit, A W

    2013-12-05

    Gastrointestinal physiology is dynamic and complex at the best of times, and a multitude of known variables can affect the overall bioavailability of drugs delivered via the oral route. Yet while the influences of food and beverage intake as just two of these variables on oral drug delivery have been extensively documented in the wider literature, specific information on their effects remains sporadic, and is not so much contextually reviewed. Food co-ingestion with oral dosage forms can mediate several changes to drug bioavailability, yet the precise mechanisms underlying this have yet to be fully elucidated. Likewise, the often detrimental effects of alcohol (ethanol) on dosage form performance have been widely observed experimentally, but knowledge of which has only moderately impacted on clinical practice. Here, we attempt to piece together the available subject matter relating to the influences of both solid and liquid foodstuffs on the gastrointestinal milieu and the implications for oral drug delivery, with particular emphasis on the behaviour of modified-release dosage forms, formulation robustness and drug absorption. Providing better insight into these influences, and exemplifying cases where formulations have been developed or modified to circumvent their associated problems, can help to appropriately direct the design of future in vitro digestive modelling systems as well as oral dosage forms resilient to these effects. Moreover, this will help to better our understanding of the impact of food and alcohol intake on normal gut behaviour and function. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Calming effect of orally administered γ-aminobutyric acid in Shih Tzu dogs.

    Science.gov (United States)

    Uetake, Katsuji; Okumoto, Ayano; Tani, Noriko; Goto, Akihiro; Tanaka, Toshio

    2012-12-01

    The calming effects of γ-aminobutyric acid (GABA) by oral administration were investigated in four adult Shih Tzu dogs. Three dosage levels (1, 2 and 4 mg/kg body weight) and non-administration were tested by an increase and decrease method. Changes in activity (for 1.5 h) and urinary cortisol levels (pre-administration, 3 and 7 h later) of dogs were monitored after administration. Without reference to dosage level, the mean times spent standing (P = 0.06), sitting (P level was observed at 7 h after administration (P GABA exerts calming effects on dogs as well as humans. © 2012 The Authors. Animal Science Journal © 2012 Japanese Society of Animal Science.

  17. Measurement of warfarin in the oral fluid of patients undergoing anticoagulant oral therapy.

    Directory of Open Access Journals (Sweden)

    Silvia Ghimenti

    Full Text Available BACKGROUND: Patients on warfarin therapy undergo invasive and expensive checks for the coagulability of their blood. No information on coagulation levels is currently available between two controls. METHODOLOGY: A method was developed to determine warfarin in oral fluid by HPLC and fluorimetric detection. The chromatographic separation was performed at room temperature on a C-18 reversed-phase column, 65% PBS and 35% methanol mobile phase, flow rate 0.7 mL/min, injection volume 25 µL, excitation wavelength 310 nm, emission wavelength 400 nm. FINDINGS: The method was free from interference and matrix effect, linear in the range 0.2-100 ng/mL, with a detection limit of 0.2 ng/mL. Its coefficient of variation was <3% for intra-day measurements and <5% for inter-day measurements. The average concentration of warfarin in the oral fluid of 50 patients was 2.5±1.6 ng/mL (range 0.8-7.6 ng/mL. Dosage was not correlated to INR (r = -0.03, p = 0.85 but positively correlated to warfarin concentration in the oral fluid (r = 0.39, p = 0.006. The correlation between warfarin concentration and pH in the oral fluid (r = 0.37, p = 0.009 confirmed the importance of pH in regulating the drug transfer from blood. A correlation between warfarin concentration in the oral fluid and INR was only found in samples with pH values ≥7.2 (r = 0.84, p = 0.004. CONCLUSIONS: Warfarin diffuses from blood to oral fluid. The method allows to measure its concentration in this matrix and to analyze correlations with INR and other parameters.

  18. Design and in vitro/in vivo evaluation of sustained-release floating tablets of itopride hydrochloride

    Directory of Open Access Journals (Sweden)

    Ahmed SM

    2016-12-01

    Full Text Available Sayed M Ahmed,1 Adel Ahmed Ali,2 Ahmed MA Ali,2,3 Omiya A Hassan2,4 1Department of Industrial Pharmacy, Faculty of Pharmacy, Assiut University, Assiut, 2Department of Pharmaceutics, Faculty of Pharmacy, Beni-Suef University, Beni-Suef, Egypt; 3Department of Pharmaceutics, Faculty of Pharmacy, Taif University, Taif, Kingdom of Saudi Arabia; 4Department of Pharmaceutics, Faculty of Pharmacy, Deraya University, El-Minia Gadida, Egypt Purpose: The aim of the present study was to improve the bioavailability of itopride (ITO and sustain its action by formulating as a floating dosage form. Materials and methods: Sustained-release floating tablets of ITO hydrochloride (HCl were prepared by direct compression using different hydrocolloid polymers such as hydroxypropyl methylcellulose and ethylcellulose and/or methacrylic acid polymers Eudragit RSPM and Carbopol 934P. The floating property was achieved using an effervescent mixture of sodium bicarbonate and anhydrous citric acid (1:1 mol/mol. Hardness, friability, content uniformity, and dissolution rate of the prepared floating tablets were evaluated. The formulation F10 composed of 28.5% Eudragit RSPM, 3% NaHCO3, and 7% citric acid provided sustained drug release. Results: In vitro results showed sustained release of F10 where the drug release percentage was 96.51%±1.75% after 24 hours (P=0.031.The pharmacokinetic results indicated that the area under the curve (AUC0–∞ of the prepared sustained-release floating tablets at infinity achieved 93.69 µg·h/mL compared to 49.89 µg·h/mL for the reference formulation (Ganaton® and the relative bioavailability of the sustained-release formulation F10 increased to 187.80% (P=0.022. Conclusion: The prepared floating tablets of ITO HCl (F10 could be a promising drug delivery system with sustained-release action and enhanced drug bioavailability. Keywords: itopride HCl, oral drug delivery, stability study, bioavailability

  19. Formulation and process considerations affecting the stability of solid dosage forms formulated with methacrylate copolymers.

    Science.gov (United States)

    Petereit, H U; Weisbrod, W

    1999-01-01

    General considerations concerning the stability of coated dosage forms are discussed, in order to avoid predictable interactions which may cause long-term stability problems. As polymers themselves maintain a high chemical stability and a low reactivity, instability phenomena mainly have to be explained by interactions of low molecular weight substances or physical changes. Possible interactions of functional groups can be predicted easily and insulating subcoates are proper countermeasures. Impurities, remaining in the polymeric material from the manufacturing process, may accelerate the hydrolysis of sensitive drugs. Instabilities of coated dosage forms are mainly based on physical interactions, caused by improper formulations of coating suspensions (i.e. plasticizers or pigments) or the film coating process. Residual moisture or solvents, probably enclosed in the core and migrating over time, may increase the permeability of coatings, due to plasticizing effects. The functionality of coatings from aqueous dispersions is linked to coalescence of latex particles. Thus any incomplete film formation, caused by too high or too low coating temperatures, may result in high permeable coatings. During storage, preferably under stress conditions this process will continue and thus change the release profile. Therefore bed temperatures of 10-20 degrees C above MFT must ensure the formation of homogeneous polymer layers during the coating process. Stability test procedures and packaging materials also need to be adapted to the physicochemical properties of the dosage form, in order to get meaningful results in stability tests.

  20. Assessment of efficacy and tolerability of once-daily extended release metformin in patients with type 2 diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Levy Juliana

    2010-03-01

    Full Text Available Abstract Aims To determine prospectively the efficacy, tolerability and patient satisfaction of an extended release formulation of metformin (metformin XR in hospital based outpatients with type 2 diabetes mellitus currently treated with standard metformin. Methods Patients on immediate release standard metformin either alone or combined with other oral agents were switched to extended release metformin XR 500 mg tablets and titrated to a maximum dose of 2000 mg/day Measurements to include glucose and lipid control, blood pressure, body weight, waist circumference, C-reactive protein, adverse events and patient satisfaction were recorded at baseline, three and six months. Results Complete data were obtained for 35 of the 61 patients enrolled to the study. At three and six months no changes were reported for any of the cardiovascular risk factors except for lipids where there was a modest rise in plasma triglycerides. These effects were achieved with a reduced dose of metformin XR compared to pre-study dosing with standard metformin (1500 mg +/- 402 vs 1861 +/- 711 p = 0.004. A total of 77% of patients were free of gastrointestinal side effects and 83% of patients stated a preference for metformin XR at the end of the study. Ghost tablets were reported in the faeces by the majority of the patients (54.1%. Conclusions Patients switched to extended release metformin XR derived the same clinical and metabolic benefits as for standard metformin but with reduced dosage, fewer gastrointestinal side effects and a greater sense of well being and satisfaction on medication.

  1. ColoPulse tablets perform comparably in healthy volunteers and Crohn's patients and show no influence of food and time of food intake on bioavailability

    NARCIS (Netherlands)

    Maurer, J.M.; Schellekens, R.C.A.; Van Rieke, H.M.; Stellaard, F.; Wutzke, K.D.; Buurman, D.J.; Dijkstra, G.; Woerdenbag, H.J.; Frijlink, H.W.; Kosterink, J.G.W.

    2013-01-01

    ColoPulse tablets are an innovative development in the field of oral drug delivery and are characterized by a colon-specific release. Until now ColoPulse dosage forms (only capsules) have been studied in healthy volunteers having a standardized breakfast three hours after administration but not in

  2. Entandophragma angolense Gum as a Novel Binder and ...

    African Journals Online (AJOL)

    Michael

    the development of oral controlled release dosage forms. These semisynthetic polymers are quite expensive when compared with natural polymers such as guar gum and alginates, while the natural polymers are nontoxic and readily available [18]. The present study was designed to evaluate the hydrophilic natural gum ...

  3. Validation of an In Vitro Bioaccessability Test Method for the Estimation of the Bioavailability of Arsenic from Soil and Sediment

    Science.gov (United States)

    2012-12-01

    evaluate predictive performance following methods described in Malinowski et al. (1997). Acceptance criteria and control limits will be based on...69: 69–78. Malinowski , H., P. Marroum, V.R. Uppoor, et al. 1997. Draft guidance for industry extended release solid oral dosage forms. In: Young D

  4. A novel once daily microparticulate dosage form comprising lansoprazole to prevent nocturnal acid breakthrough in the case of gastro-esophageal reflux disease: preparation, pharmacokinetic and pharmacodynamic evaluation.

    Science.gov (United States)

    Alai, Milind; Lin, Wen Jen

    2013-01-01

    The objective of this study was to formulate and evaluate the lansoprazole (LPZ)-loaded microparticles to prevent nocturnal acid breakthrough in the case of gastro-esophageal reflux disease (GERD). The microparticulate delivery system was prepared by solvent evaporation method using Eudragit RS100 as a matrix polymer followed by enteric coated with Eudragit S100 and hydroxypropyl methylcellulose phthalate HP55 using spray drying method. The enteric coated microparticles were stable in gastric pH condition. In vivo pharmacokinetic and pharmacodynamic studies in male Wistar rats demonstrated that enteric coated microparticles sustained release of LPZ and promoted ulcer healing activity. In other words, the microparticulate dosage form provided effective drug concentration for a longer period as compared to conventional extended release dosage form, and showed sufficient anti-acid secretion activity to treat acid related disorders including the enrichment of nocturnal acid breakthrough event based on a once daily administration.

  5. Study of base influence on the active pharmaceutical ingredients releasing from combined ointments with antimycotic action

    Directory of Open Access Journals (Sweden)

    V. V. Luc

    2018-03-01

    characteristics of medicine and its efficacy. The aim of this work is biopharmaceutical validation of rational composition of semisolid dosage form for external use containing the combination of 2-mercaptobenzothiazole and chinosolum. Materials and methods. As a delivery vehicle for developing pharmacotherapeutical medicine the bases widely used in manufacturing of semisolid dosage forms, providing easy “wipe-off" effect after application, non-allergic and non-sensibilic after tracing, available for national producer and described in literature were studied. As the active pharmaceutical ingredients for antimycotic ointment 2-mercaptobenzothiazole and chinosolum in concentration 1% and 1% accordingly providing with suitable level of antifungal activity were used. Taking into account the advisability of high dispersion degree of medical substances in semisolid dosage forms for external use and physical-chemical properties of active pharmaceutical ingredients 2-mercaptobenzothiazole was added in all bases after preliminary dissolution in polyethylenoxyde 400 with heating and chinosolum was added after dissolution in prescribed or minimal amount of water. 2-mercaptobenzothiazole and chinosolum releasing from ointment compositions was studied with equilibrium dialysis method by Kruvchinsky at the temperature 32±0,5˚С through the semipermeable film “Kuprofan” in the Franz cell apparatus (producer PermeGear, Inc., USA. As a dialysis medium taking into account 2-mercaptobenzothiazole solubility we used solution containing methanol and water 1:1 and chinosolum releasing was carried out into water. Concentration of active pharmaceutical substances released from experimental ointments after 30 min was determined by spectrophotometric method. Results. The obtained results indicate significant advantage of the hydrophilic ointment bases, which provide an optimal level of release of 2-mercaptobenzothiazole and chinosolum from the experimental composite soft dosage forms for external

  6. Disintegration of chemotherapy tablets for oral administration in patients with swallowing difficulties.

    Science.gov (United States)

    Siden, Rivka; Wolf, Matthew

    2013-06-01

    The administration of oral chemotherapeutic drugs can be problematic in patients with swallowing difficulties. Inability to swallow solid dosage forms can compromise compliance and may lead to poor clinical outcome. The current technique of tablet crushing to aid in administration is considered an unsafe practice. By developing a technique to disintegrate tablets in an oral syringe, the risk associated with tablet crushing can be avoided. The purpose of this study was to determine the feasibility of using disintegration in an oral syringe for the administration of oral chemotherapeutic tablets. Eight commonly used oral chemotherapeutic drugs were tested. Tablets were placed in an oral syringe and allowed to disintegrate in tap water. Various volumes and temperatures were tested to identify which combination allows for complete disintegration of the tablet in the shortest amount of time. The oral syringe disintegration method was considered feasible if disintegration occurred in ≤15 min and in ≤20 mL of water and the dispersion passed through an oral syringe tip. The following tablets were shown to disintegrate within 15 min and in disintegration test. Disintegrating oral chemotherapeutic tablets in a syringe provides a closed system to administer hazardous drugs and allows for the safe administration of oral chemotherapeutic drugs in a tablet form to patients with swallowing difficulties.

  7. Usefulness of laser ablation ICP-MS for analysis of metallic particles released to oral mucosa after insertion of dental implants.

    Science.gov (United States)

    Sajnóg, Adam; Hanć, Anetta; Koczorowski, Ryszard; Makuch, Krzysztof; Barałkiewicz, Danuta

    2018-03-01

    Despite the fact that titanium is considered highly biocompatible, its presence in the oral cavity (an environment of frequently changing pH and temperature) may result in the release of titanium from intraosseous implants into the oral mucosa, causing a range of reactions from the human body. Fragments of oral mucosa collected from patients after dental implant insertion were analyzed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The study revealed an elevated content of elements (Ti, Al, V) which are components of the metal implants and temporary cover screws. Dynamic ablation of the tissue surface was used in order to obtain maps of the content and distribution of analyzed elements. The material consisted of 30 oral mucosa tissue fragments collected 3-5 months after implantation and 10 samples collected before implantation (control group). The application of optical microscope allowed for indication and confirmation of the location of metal particles prior to LA-ICP-MS analysis. The so-obtained map permitted location of regions containing metal particles. LA-ICP-MS analysis revealed groups of samples with similar properties of metal particles, thus confirming that those metal particles were the main source of the elevated content of metals (Ti, Al, V) in the tissue after implantation. A calibration strategy based on matrix matched solid standards with powdered egg white proteins as matrix material was applied with 34 S as an internal standard. The accuracy of the analytical method was verified by ablating pellets of certified reference material ERM-BB422 Fish muscle. Copyright © 2017 Elsevier GmbH. All rights reserved.

  8. beta. -Amyloid gene dosage in Alzheimer's disease

    Energy Technology Data Exchange (ETDEWEB)

    Murdoch, G H; Manuelidis, L; Kim, J H; Manuelidis, E E

    1988-01-11

    The 4-5 kd amyloid ..beta..-peptide is a major constituent of the characteristic amyloid plaque of Alzheimer's disease. It has been reported that some cases of sporatic Alzheimer's disease are associated with at least a partial duplication of chromosome 21 containing the gene corresponding to the 695 residue precursor of this peptide. To contribute to an understanding of the frequency to such a duplication event in the overall Alzheimer's population, the authors have determined the gene dosage of the ..beta..-amyloid gene in this collection of cases. All cases had a clinical diagnosis of Alzheimer's confirmed neuropathologically. Each Alzheimer's case had an apparent normal diploid ..beta..-amyloid gene dosage, while control Down's cases had the expected triploid dosage. Thus partial duplication of chromosome 21 may be a rare finding in Alzheimer's disease. Similar conclusions were just reported in several studies of the Harvard Alzheimer collection.

  9. 21 CFR 524.1662 - Oxytetracycline hydrochloride ophthalmic and topical dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride ophthalmic and topical dosage forms. 524.1662 Section 524.1662 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... DOSAGE FORM NEW ANIMAL DRUGS § 524.1662 Oxytetracycline hydrochloride ophthalmic and topical dosage forms. ...

  10. Release of nickel and chromium ions from orthodontic wires following the use of teeth whitening mouthwashes

    Directory of Open Access Journals (Sweden)

    AmirHossein Mirhashemi

    2018-02-01

    Full Text Available Abstract Background Corrosion resistance is an important requirement for orthodontic appliances. Nickel and chromium may be released from orthodontic wires and can cause allergic reactions and cytotoxicity when patients use various mouthwashes to whiten their teeth. Our study aimed to assess the release of nickel and chromium ions from nickel titanium (NiTi and stainless steel (SS orthodontic wires following the use of four common mouthwashes available on the market. Methods This in vitro, experimental study was conducted on 120 orthodontic appliances for one maxillary quadrant including five brackets, one band and half of the required length of SS, and NiTi wires. The samples were immersed in Oral B, Oral B 3D White Luxe, Listerine, and Listerine Advance White for 1, 6, 24, and 168 h. The samples immersed in distilled water served as the control group. Atomic absorption spectroscopy served to quantify the amount of released ions. Results Nickel ions were released from both wires at all time-points; the highest amount was in Listerine and the lowest in Oral B mouthwashes. The remaining two solutions were in-between this range. The process of release of chromium from the SS wire was the same as that of nickel. However, the release trend in NiTi wires was not uniform. Conclusions Listerine caused the highest release of ions. Listerine Advance White, Oral B 3D White Luxe, and distilled water were the same in terms of ion release. Oral B showed the lowest amount of ion release.

  11. Understanding release kinetics of biopolymer drug delivery microcapsules for biomedical applications

    International Nuclear Information System (INIS)

    Desai, Salil; Perkins, Jessica; Harrison, Benjamin S.; Sankar, Jag

    2010-01-01

    Drug delivery and dosage concentrations are considered as major focal points in conventional as well as battlefield emergency medicine. The concept of localizing drug delivery via microcapsules is an evolving field to confine the adverse side effects of high concentration drug doses. This paper focuses on understanding release kinetics through biopolymer microcapsules for time-dependent drug release. Calcium alginate microcapsules were manufactured using a direct-write inkjet technique. Rhodamine 6G was used as the release agent to observe the release kinetics from calcium alginate beads in distilled water. A design of experiments was constructed to compare the effect of the microcapsule diameter and different concentrations of calcium chloride (M) and sodium alginate (%, w/v) solutions on the release kinetics profiles of the microcapsules. This research gives insight to identify favorable sizes of microcapsules and concentrations of sodium alginate and calcium chloride solutions for controlled release behavior of drug delivery microcapsules.

  12. Design and in vivo evaluation of oxycodone once-a-day controlled-release tablets

    Directory of Open Access Journals (Sweden)

    Kim JY

    2015-01-01

    Full Text Available Ju-Young Kim,1,* Sung-Hoon Lee,2,3,* Chun-Woong Park,4 Yun-Seok Rhee,5 Dong-Wook Kim,6 Junsang Park,3 Moonseok Lee,3 Jeong-Woong Seo,2 Eun-Seok Park2 1College of Pharmacy, Woosuk University, Wanju-gun, Republic of Korea; 2School of Pharmacy, Sungkyunkwan University, Suwon, Republic of Korea; 3GL Pharmtech, Seongnam, Republic of Korea; 4College of Pharmacy, Chungbuk National University, Cheongju, Republic of Korea; 5College of Pharmacy and Research Institute of Pharmaceutical Sciences, Gyeongsang National University, Jinju, Republic of Korea; 6Department of Pharmaceutical Engineering, Cheongju University, Cheongju, Republic of Korea *These authors contributed equally to this work Abstract: The aim of present study was to design oxycodone once-a-day controlled-release (CR tablets and to perform in vitro/in vivo characterizations. Release profiles to achieve desired plasma concentration versus time curves were established by using simulation software and reported pharmacokinetic parameters of the drug. Hydroxypropyl methylcellulose (HPMC 100,000 mPa·s was used as a release modifier because the polymer was found to be resistant to changes in conditions of the release study, including rotation speed of paddle and ion strength. The burst release of the drug from the CR tablets could be suppressed by applying an additional HPMC layer as a physical barrier. Finally, the oxycodone once-a-day tablet was comprised of two layers, an inert HPMC layer and a CR layer containing drug and HPMC. Commercial products, either 10 mg bis in die (bid [twice a day] or once-a-day CR tablets (20 mg were administered to healthy volunteers, and calculated pharmacokinetic parameters indicated bioequivalence of the two different treatments. The findings of the present study emphasize the potential of oxycodone once-a-day CR tablets for improved patient compliance, safety, and efficacy, which could help researchers to develop new CR dosage forms of oxycodone. Keywords

  13. Formulation Optimization and In-vitro Evaluation of Oral Floating ...

    African Journals Online (AJOL)

    matrix tablets and to systematically optimize its drug release using varying levels of xanthan gum and hydroxypropyl ... stomach and improve oral bioavailability of drugs that have ... which can affect its sustained release formulation. [19].

  14. Evaluation of tissue engineered models of the oral mucosa to investigate oral candidiasis.

    Science.gov (United States)

    Yadev, Nishant P; Murdoch, Craig; Saville, Stephen P; Thornhill, Martin H

    2011-06-01

    Candida albicans is a commensal organism that can be isolated from the majority of healthy individuals. However, in certain susceptible individuals C. albicans can become pathogenic leading to the mucocutaneous infection; oral candidiasis. Murine models and in vitro monolayer cultures have generated some data on the likely virulence and host factors that contribute to oral candidiasis but these models have limitations. Recently, tissue engineered oral mucosal models have been developed to mimic the normal oral mucosa but little information is available on their true representation. In this study, we assessed the histological features of three different tissue engineered oral mucosal models compared to the normal oral mucosa and analysed both cell damage and cytokine release following infection with C. albicans. Models comprised of normal oral keratinocytes and a fibroblast-containing matrix displayed more similar immunohistological and proliferation characteristics to normal mucosa, compared to models composed of an oral carcinoma cell line. Although all models were invaded and damaged by C. albicans in a similar manner, the cytokine response was much more pronounced in models containing normal keratinocytes. These data suggest that models based on normal keratinocytes atop a fibroblast-containing connective tissue will significantly aid in dissecting the molecular pathogenesis of oral candidiasis. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. 21 CFR 522.1222 - Ketamine hydrochloride injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ketamine hydrochloride injectable dosage forms. 522.1222 Section 522.1222 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... ANIMAL DRUGS § 522.1222 Ketamine hydrochloride injectable dosage forms. ...

  16. Single, 14-Day, and 13-Week Repeated Dose Toxicity Studies of Daily Oral Gelidium elegans Extract Administration to Rats.

    Science.gov (United States)

    Choi, Jia; Ryu, Su-Jung; Kim, Kui-Jin; Kim, Hyung-Min; Chung, Hee-Chul; Lee, Boo-Yong

    2018-01-20

    Gelidium elegans extract (GEE) is derived from a red alga from the Asia-Pacific region, which has antioxidant, anti-adipogenic, and anti-hyperglycemic effects. However, detailed studies of the toxicology of GEE have not been performed. We evaluated the single oral dose toxicity of GEE in male and female Sprague-Dawley (CD) rats. GEE did not cause deaths or have toxic effects at dosages of 5000 mg/kg/day, although compound-colored stools and diarrhea were observed in both sexes, which lasted 5000 mg/kg. We next evaluated the repeated oral dose toxicity of GEE in CD rats over 14 days and 13 weeks. GEE did not induce any significant toxicological changes in either sex at 2000 mg/kg/day. Repeated oral dose toxicity studies showed no adverse effects, in terms of clinical signs, mortality, body mass, food consumption, ophthalmic examination, urinalysis, hematology, serum biochemistry, necropsy, organ masses, or histopathology, at dosages of 500, 1000, or 2000 mg/kg/day. The no observed adverse effect level (NOAEL) for GEE is thus likely to be >2000 mg/kg/day, and no pathology was identified in potential target organs. Therefore, this study indicates that repeated oral dosing with GEE is safe in CD rats.

  17. Investigation of contrast agent dosage for perfusion-weighted MRI

    International Nuclear Information System (INIS)

    Erb, G.; Benner, T.; Heiland, S.; Reith, W.; Sartor, K.; Forsting, M.

    1997-01-01

    Purpose: In this study we investigated, whether increasing the dosage of a paramagnetic contrast agent results in a stronger signal decrease in T 2 *-weighted perfusion sequences and therefore more meaningful parameter maps. Material and methods: In a prospective study bolus injection of gadolinium-DTPA was performed at dosages of 0.1, 0.2, and 0.3 mmol/kg body weight (BW) in 10 patients each. Before, during and after bolus injection 40 T 2 *-weighted images of a reference brain slice were acquired within 65.6 seconds on a 1.0 T clinical scanner and perfusion parameters were calculated. Results: Due to the limited signal decrease during bolus passage and the resulting low signal-difference-to-noise ratio (ΔS/N) no reliable differentiation of gray and white matter was possible at a contrast agent dosage of 0.1 mmol/kg BW. Only at higher dosages, both, signal decrease and ΔS/N were strong enough to allow differentiation of gray and white matter and to yield reliable parameter maps. Conclusion: For meaningful MR perfusion imaging at 1.0 T and with the given sequence a contrast agent dosage of at least 0.2 mmol/kg BW is necessary, if a 0.5-molar contrast agent is used. (orig.) [de

  18. “Jump Start and Gain” Model for Dosage Compensation in Drosophila Based on Direct Sequencing of Nascent Transcripts

    Directory of Open Access Journals (Sweden)

    Francesco Ferrari

    2013-11-01

    Full Text Available Dosage compensation in Drosophila is mediated by the MSL complex, which increases male X-linked gene expression approximately 2-fold. The MSL complex preferentially binds the bodies of active genes on the male X, depositing H4K16ac with a 3′ bias. Two models have been proposed for the influence of the MSL complex on transcription: one based on promoter recruitment of RNA polymerase II (Pol II, and a second featuring enhanced transcriptional elongation. Here, we utilize nascent RNA sequencing to document dosage compensation during transcriptional elongation. We also compare X and autosomes from published data on paused and elongating polymerase in order to assess the role of Pol II recruitment. Our results support a model for differentially regulated elongation, starting with release from 5′ pausing and increasing through X-linked gene bodies. Our results highlight facilitated transcriptional elongation as a key mechanism for the coordinated regulation of a diverse set of genes.

  19. Assessing the influence of media composition and ionic strength on drug release from commercial immediate-release and enteric-coated aspirin tablets.

    Science.gov (United States)

    Karkossa, Frank; Klein, Sandra

    2017-10-01

    The objective of this test series was to elucidate the importance of selecting the right media composition for a biopredictive in-vitro dissolution screening of enteric-coated dosage forms. Drug release from immediate-release (IR) and enteric-coated (EC) aspirin formulations was assessed in phosphate-based and bicarbonate-based media with different pH, electrolyte composition and ionic strength. Drug release from aspirin IR tablets was unaffected by media composition. In contrast, drug release from EC aspirin formulations was affected by buffer species and ionic strength. In all media, drug release increased with increasing ionic strength, but in bicarbonate-based buffers was delayed when compared with that in phosphate-based buffers. Interestingly, the cation species in the dissolution medium had also a clear impact on drug release. Drug release profiles obtained in Blank CarbSIF, a new medium simulating pH and average ionic composition of small intestinal fluid, were different from those obtained in all other buffer compositions studied. Results from this study in which the impact of various media parameters on drug release of EC aspirin formulations was systematically screened clearly show that when developing predictive dissolution tests, it is important to simulate the ionic composition of intraluminal fluids as closely as possible. © 2017 Royal Pharmaceutical Society.

  20. PREPARATION AND CHARACTERIZATION OF CO-PROCESSED EXCIPIENT-PREGELATINIZED CASSAVA STARCH PROPIONATE AS A MATRIX IN THE GASTRORETENTIVE DOSAGE FORM

    Directory of Open Access Journals (Sweden)

    Junaedi

    2011-11-01

    Full Text Available The gastroretentive dosage form is designed to prolong the gastric residence time of the drug delivery system whichalso results in the development of an appropriate excipient. The purpose of this study is to develop and characterize coprocessedexcipient made from carrageenan (kappa-iota = 1:1 and pregelatinized cassava starch propionate (PCSP inratios of 1:1, 1:2, and 1:3. PCSP was prepared with propionic anhydride in an aqueous medium. The product was mixedwith carrageenan (kappa-iota = 1:1, as well as characterized physicochemical and functional properties. The coprocessedexcipient was then used as a mucoadhesive granule and floating tablet. The USP Basket was selected toperform the dissolution test of the granules in HCl buffer (pH 1.2 and distilled water for 8 hours each. Mucoadhesiveproperties were evaluated using bioadhesive through a vitro test and wash-off test. As for the floating tablet, the USPPaddle was selected to perform the dissolution test of the tablets in 0.1 N HCl for 10 hours. The floating lag time andfloating time were tested in 0.1 N HCl for 24 hours. The result of these studies indicated that co-processed excipientcarrageenan-PCSP can retard dosage form in gastric and drug controlled release, thus making it a suitable material forthe gastroretentive dosage form.

  1. Package selection for moisture protection for solid, oral drug products.

    Science.gov (United States)

    Waterman, Kenneth C; MacDonald, Bruce C

    2010-11-01

    This review describes how best to select the appropriate packaging options for solid, oral drug products based on both chemical and physical stability, with respect to moisture protection. This process combines an accounting for the initial moisture content of dosage form components, moisture transfer into (out of) packaging based on a moisture vapor transfer rate (MVTR), and equilibration between drug products and desiccants based on their moisture sorption isotherms to provide an estimate of the instantaneous relative humidity (RH) within the packaging. This time-based RH is calculationally combined with a moisture-sensitive Arrhenius equation (determined using the accelerated stability assessment program, ASAP) to predict the drug product's chemical stability over time as a function of storage conditions and packaging options. While physical stability of dosage forms with respect to moisture has been less well documented, a process is recommended based on the threshold RH at which changes (e.g., dosage form dissolution, tablet hardness, drug form) become problematic. The overall process described allows packaging to be determined for a drug product scientifically, with the effect of any changes to storage conditions or packaging to be explicitly accounted for. © 2010 Wiley-Liss, Inc. and the American Pharmacists Association

  2. Development of Sustained Release Capsules Containing “Coated Matrix Granules of Metoprolol Tartrate”

    OpenAIRE

    Siddique, Sabahuddin; Khanam, Jasmina; Bigoniya, Papiya

    2010-01-01

    The objective of this investigation was to prepare sustained release capsule containing coated matrix granules of metoprolol tartrate and to study its in vitro release and in vivo absorption. The design of dosage form was performed by choosing hydrophilic hydroxypropyl methyl cellulose (HPMC K100M) and hydrophobic ethyl cellulose (EC) polymers as matrix builders and Eudragit® RL/RS as coating polymers. Granules were prepared by composing drug with HPMC K100M, EC, dicalcium phosphate by wet gr...

  3. Dosage of boron traces in graphite, uranium and beryllium oxide; Dosage de traces de bore dans le graphite, l'uranium et l'oxyde de beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Coursier, J [Ecole Nationale Superieure de Physique et Chimie Industrielles, 75 - Paris (France); Hure, J; Platzer, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The problem of the dosage of the boron in the materials serving to the construction of nuclear reactors arises of the following way: to determine to about 0,1 ppm close to the quantities of boron of the order of tenth ppm. We have chosen the colorimetric analysis with curcumin as method of dosage. To reach the indicated contents, it is necessary to do a previous separation of the boron and the materials of basis, either by extraction of tetraphenylarsonium fluoborate in the case of the boron dosage in uranium and the beryllium oxide, either by the use of a cations exchanger resin of in the case of graphite. (M.B.) [French] Le probleme du dosage du bore dans les materiaux servant a la construction de reacteurs nucleaires se pose de la facon suivante: determiner a environ 0,1 ppm pres des quantites de bore de l'ordre de quelques dixiemes de ppm. Nous avons choisit la colorimetrie a la curcumine comme methode de dosage. Pour atteindre les teneurs indiquees, il est necessaire d'effectuer une separation prealable du bore et des materiaux de base, soit par extraction du fluoborate de tetraphenylarsonium dans le cas du dosage de bore dans l'uranium et l'oxyde de beryllium, soit par l'utilisation d'une resine echangeuse de cations dans le cas du graphite. (M.B.)

  4. Dosage compensation of serine-4 transfer RNA in Drosophila melanogaster

    International Nuclear Information System (INIS)

    Birchler, J.A.; Owenby, R.K.; Jacobson, K.B.

    1982-01-01

    A dosage series of the X chromosome site for serine-4 transfer RNA consisting of one of three copies in females and one to two in males was constructed to test whether transfer RNA expression is governed by dosage compensation. A dosage effect on the level of the serine-4 isoacceptor was observed in both females and males when the structural locus was varied. However, in males, each dose had a relatively greater expression so the normal one dose was slightly greater than the total female value and the duplicated male had the highest relative expression of all the types examined. Serine-4 levels in males and females from an isogenic Oregon-R stock were similar. Thus the transfer RNA levels conform to the expectations of dosage compensation

  5. Molecularly Imprinted Polymers for 5-Fluorouracil Release in Biological Fluids

    Directory of Open Access Journals (Sweden)

    Franco Alhaique

    2007-04-01

    Full Text Available The aim of this work was to investigate the possibility of employing Molecularly Imprinted Polymers (MIPs as a controlled release device for 5-fluorouracil (5-FU in biological fluids, especially gastrointestinal ones, compared to Non Imprinted Polymers (NIPs. MIPs were synthesized using methacrylic acid (MAA as functional monomer and ethylene glycol dimethacrylate (EGDMA as crosslinking agent. The capacity of the polymer to recognize and to bind the template selectively in both organic and aqueous media was evaluated. An in vitro release study was performed both in gastrointestinal and in plasma simulating fluids. The imprinted polymers bound much more 5-Fu than the corresponding non-imprinted ones and showed a controlled/sustained drug release, with MIPs release rate being indeed much more sustained than that obtained from NIPs. These polymers represent a potential valid system for drug delivery and this study indicates that the selective binding characteristic of molecularly imprinted polymers is promising for the preparation of novel controlled release drug dosage form.

  6. Formulating a poorly water soluble drug into an oral solution suitable for paediatric patients; lorazepam as a model drug

    NARCIS (Netherlands)

    A.C. Van Der Vossen (Anna C.); I. Van Der Velde (Iris); O. Smeets (Oscar); Postma, D.J.; Eckhardt, M.; A. Vermes (Andras); B.C.P. Koch (Birgit C. P.); A.G. Vulto (Arnold); L.M. Hanff (Lidwien)

    2017-01-01

    textabstractIntroduction Many drugs are unavailable in suitable oral paediatric dosage forms, and pharmacists often have to compound drugs to provide paediatric patients with an acceptable formulation in the right dose. Liquid formulations offer the advantage of dosing flexibility and ease of

  7. Perioperative effects of oral midazolam premedication in children undergoing skin laser treatment. A double-blinded randomized placebo-controlled trial

    NARCIS (Netherlands)

    Shoroghi, Mehrdad; Arbabi, Shahriyar; Farahbakhsh, Farshid; Sheikhvatan, Mehrdad; Abbasi, Ali

    2011-01-01

    Purpose: To investigate and compare the efficacy of oral midazolam with two different dosages in orange juice on perioperative hemodynamics and behavioral changes in children who underwent skin laser treatment in an academic educational Hospital. Methods: Ninety children, candidates for skin laser

  8. Role of Mast Cells in Oral Lichen Planus and Oral Lichenoid Reactions.

    Science.gov (United States)

    Ramalingam, Suganya; Malathi, Narasimhan; Thamizhchelvan, Harikrishnan; Sangeetha, Narasimhan; Rajan, Sharada T

    2018-01-01

    Oral lichen planus (OLP) is a chronic T cell mediated disease of oral mucosa, skin, and its appendages with a prevalence of 0.5 to 2.6% worldwide. Oral lichenoid reactions (OLR) are a group of lesions with diverse aetiologies but have clinical and histological features similar to OLP, thereby posing a great challenge in differentiating both lesions. Mast cells are multifunctional immune cells that play a major role in the pathogenesis of lichen planus by release of certain chemical mediators. Increased mast cell densities with significant percentage of degranulation have been observed as a consistent finding in pathogenesis of oral lichen planus. The current study was aimed at quantifying the mast cells in histopathological sections of OLP and OLR thereby aiding a means of distinguishing these lesions. The study group involved 21 cases of oral lichen planus, 21 cases of oral lichenoid reactions, and 10 control specimens of normal buccal mucosa. All the cases were stained with Toluidine Blue and routine haematoxylin and eosin and the mast cells were quantified. The results were analyzed using the Kruskal-Wallis test and an intergroup analysis was performed using Mann-Whitney U test. The number of mast cells showed an increased value in oral lichen planus when compared to oral lichenoid reaction and thus an estimation of mast cells count could aid in distinguishing OLP from OLR histopathologically.

  9. Influence of CAD/CAM all-ceramic materials on cell viability, migration ability and adenylate kinase release of human gingival fibroblasts and oral keratinocytes.

    Science.gov (United States)

    Pabst, A M; Walter, C; Grassmann, L; Weyhrauch, M; Brüllmann, D D; Ziebart, T; Scheller, H; Lehmann, K M

    2014-05-01

    The aim of this study was to analyze the influence of four CAD/CAM all-ceramic materials on cell viability, migration ability and adenylate kinase (ADK) release of human gingival fibroblasts (HGF) and oral keratinocytes (HOK). HGF and HOK were cultured on disc-shaped CAD/CAM all-ceramic materials (e.max CAD LT, e.max CAD HT, Empress CAD and Mark II) and on discs made of tissue culture polystyrene surface (TCPS) serving as control. Cell viability was analyzed by using an MTT assay, and migration ability was investigated by a scratch assay. A ToxiLight assay has been performed to analyze the effect of all-ceramic materials on ADK release and cell apoptosis. At MTT assay for HGF, no significant decrease of cell viability could be detected at all points of measurement (p each > 0.05), while HOK demonstrated a significant decrease in cell viability especially on Empress CAD and Mark II at each point of measurement (p each materials at all points of measurement (between -36 % and -71 %; p each ceramic materials could be investigated. This study disclosed significant differences in cell viability and migration ability of HGF and HOK on CAD/CAM all-ceramic materials. CAD/CAM all-ceramic materials can influence oral cell lines responsible for soft tissue creation which may affect the esthetic outcome.

  10. Evolution of vertebrate sex chromosomes and dosage compensation.

    Science.gov (United States)

    Graves, Jennifer A Marshall

    2016-01-01

    Differentiated sex chromosomes in mammals and other vertebrates evolved independently but in strikingly similar ways. Vertebrates with differentiated sex chromosomes share the problems of the unequal expression of the genes borne on sex chromosomes, both between the sexes and with respect to autosomes. Dosage compensation of genes on sex chromosomes is surprisingly variable - and can even be absent - in different vertebrate groups. Systems that compensate for different gene dosages include a wide range of global, regional and gene-by-gene processes that differ in their extent and their molecular mechanisms. However, many elements of these control systems are similar across distant phylogenetic divisions and show parallels to other gene silencing systems. These dosage systems cannot be identical by descent but were probably constructed from elements of ancient silencing mechanisms that are ubiquitous among vertebrates and shared throughout eukaryotes.

  11. Mydriatics release from solid and semi-solid ophthalmic formulations using different in vitro methods.

    Science.gov (United States)

    Pescina, Silvia; Macaluso, Claudio; Gioia, Gloria Antonia; Padula, Cristina; Santi, Patrizia; Nicoli, Sara

    2017-09-01

    The aim of the present paper was the development of semi-solid (hydrogels) and solid (film) ophthalmic formulations for the controlled release of two mydriatics: phenylephrine and tropicamide. The formulations - based on polyvinylalcohol and hyaluronic acid - were characterized, and release studies were performed with three different in vitro set-ups, i.e. Franz-type diffusion cell, vial method and inclined plane; for comparison, a solution and a commercial insert, both clinically used to induce mydriasis, were evaluated. Both gels and film allowed for a controlled release of drugs, appearing a useful alternative for mydriatics administration. However, the release kinetic was significantly influenced by the method used, highlighting the need for optimization and standardization of in vitro models for the evaluation of drug release from ophthalmic dosage forms.

  12. A novel mechanism for NETosis provides antimicrobial defense at the oral mucosa

    DEFF Research Database (Denmark)

    Mohanty, Tirthankar; Sjögren, Jonathan; Kahn, Fredrik

    2015-01-01

    Neutrophils are essential for host defense at the oral mucosa and neutropenia or functional neutrophil defects lead to disordered oral homeostasis. We found that neutrophils from the oral mucosa harvested from morning saliva had released neutrophil extracellular traps (undergone NETosis) in vivo...

  13. Ion release from orthodontic brackets in 3 mouthwashes: an in-vitro study.

    Science.gov (United States)

    Danaei, Shahla Momeni; Safavi, Afsaneh; Roeinpeikar, S M Mehdi; Oshagh, Morteza; Iranpour, Shiva; Omidkhoda, Maryam; Omidekhoda, Maryam

    2011-06-01

    Stainless steel orthodontic brackets can release metal ions into the saliva. Fluoridated mouthwashes are often recommended to orthodontic patients to reduce the risk of white-spot lesions around their brackets. However, little information is available regarding the effect of different mouthwashes in ion release of orthodontic brackets. The purpose of this study was to measure the amount of metal ion release from orthodontic brackets when kept in different mouthwashes. One hundred sixty stainless steel brackets (0.022-in, 3M Unitek, Monrovia, Calif) were divided randomly into 4 equal groups and immersed in Oral B (Procter & Gamble, Weybridge, United Kingdom), chlorhexidine (Shahdaru Labratories, Tehran, Iran), and Persica (Poursina Pharmaceutical Laboratories, Tehran, Iran) mouthwashes and distilled deionized water and incubated at 37°C for 45 days. Nickel, chromium, iron, copper, and manganese released from the orthodontic brackets were measured with an inductively coupled plasma spectrometer. For statistical analysis, 1-way analysis of variance (ANOVA) and the Duncan multiple-range tests were used. The results showed that ion release in deionized water was significantly (P 0.05) in nickel, chromium, iron, and copper ion release in the Oral B and Persica mouthwashes. The level of manganese release was significantly different in all 4 groups. If ion release is a concern, Oral B and Persica mouthwashes might be better options than chlorhexidine for orthodontic patients with stainless steel brackets. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  14. Evaluation of insecticides in different dosages to control cicadas in parica plantations

    Directory of Open Access Journals (Sweden)

    Odineila Martins Monteiro

    2014-07-01

    Full Text Available This study aimed to determine the more efficient and economically viable dosage of chemical insecticide to control Quesada gigas (Hemiptera: Cicadidae nymphs in parica plantations. Three dosages of three products (carbofuran, imidacloprid and thiamethoxam were tested based on the maximum recommended dosage for the control of cicadas in coffee plants and applied in total area. The dosage of one kilogram of a commercial product based in thiamethoxam per hectare was more efficient economically and environmentally to control nymphs of Q. gigas in parica plantations.

  15. Non-Conventional Applications of Computerized Tomography: Analysis of Solid Dosage Forms Produced by Pharmaceutical Industry

    International Nuclear Information System (INIS)

    Martins de Oliveira, Jose Jr.; Germano Martins, Antonio Cesar

    2010-01-01

    X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe a non-conventional application of computerized tomography: visualization and improvements in the understanding of some internal structural features of solid dosage forms. A micro-CT X-ray scanner, with a minimum resolution of 30 μm was used to characterize some pharmaceutical tablets, granules, controlled-release osmotic tablet and liquid-filled soft-gelatin capsules. The analysis presented in this work are essentially qualitative, but quantitative parameters, such as porosity, density distribution, tablets dimensions, etc. could also be obtained using the related CT techniques.

  16. Controlling Release of Integral Lipid Nanoparticles Based on Osmotic Pump Technology.

    Science.gov (United States)

    Tian, Zhiqiang; Yu, Qin; Xie, Yunchang; Li, Fengqian; Lu, Yi; Dong, Xiaochun; Zhao, Weili; Qi, Jianping; Wu, Wei

    2016-08-01

    To achieve controlled release of integral nanoparticles by the osmotic pump strategy using nanostructured lipid carriers (NLCs) as model nanoparticles. NLCs was prepared by a hot-homogenization method, transformed into powder by lyophilization, and formulated into osmotic pump tablets (OPTs). Release of integral NLCs was visualized by live imaging after labeling with a water-quenching fluorescent probe. Effects of formulation variables on in vitro release characteristics were evaluated by measuring the model drug fenofibrate. Pharmacokinetics were studied in beagle dogs using the core tablet and a micronized fenofibrate formulation as references. NLCs are released through the release orifices of the OPTs as integral nanoparticles. Near zero-order kinetics can be achieved by optimizing the influencing variables. After oral administration, decreased C max and steady drug levels for as long as over 24 h are observed. NLC-OPTs show an oral bioavailability of the model drug fenofibrate similar to that of the core tablets, which is about 1.75 folds that of a fast-release formulation. Controlled release of integral NLCs is achieved by the osmotic pump strategy.

  17. Dual-release hydrocortisone treatment: glycometabolic profile and health-related quality of life

    Directory of Open Access Journals (Sweden)

    L M Mongioì

    2018-01-01

    Full Text Available Objective: Adrenal insufficiency (AI is a chronic condition associated with increased mortality and morbidity. The treatment of AI in the last years has been object of important changes due to the development of a dual-release preparation of hydrocortisone. It differs from previous therapeutic strategy as it contemplates a once-daily tablet that allows more closely mimicking the physiological circadian cortisol rhythm. The aim of the study was to evaluate the effects of dual-release hydrocortisone treatment on the glycometabolic profile and health-related quality of life of patients with AI. Design and Methods: In this clinical open trial, we enrolled ten patients with primary AI (41 ± 2.67 years and nine patients with AI secondary to hypopituitarism (53.2 ± 17.7 years. We evaluated the glycometabolic profile before and 3, 6, 9 and 12 months after dual-release hydrocortisone administration. We also evaluated health-related quality of life, estimated by the AddiQol questionnaire. The mean dose administered of dual-release hydrocortisone was 28.33 ± 6.68 mg/day. Results: One female hypopituitary patient dropped out from the study. After 12 months of treatment, the mean dosage administered of dual-release hydrocortisone was significantly lower (P < 0.05 and all patients reported improved quality of life and well-being. The glycometabolic profile improved and the glycosylated hemoglobin decreased significantly in patients with primary AI (6.25 ± 0.2 vs 5.35 ± 0.17, P < 0.05. In contrast, hypopituitary patients had worse glycometabolic profile and a trend toward hypertriglyceridemia. Conclusions: Dual-release hydrocortisone treatment improved the quality of life of patients with AI, and it allowed a decrease of cortisol dosage administered in the absence of side effects. The glycometabolic profile worsened in hypopituitary patients.

  18. 21 CFR 522.1696 - Penicillin G procaine implantation and injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin G procaine implantation and injectable dosage forms. 522.1696 Section 522.1696 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... DOSAGE FORM NEW ANIMAL DRUGS § 522.1696 Penicillin G procaine implantation and injectable dosage forms. ...

  19. Preparation and evaluation of Vinpocetine self-emulsifying pH gradient release pellets.

    Science.gov (United States)

    Liu, Mengqi; Zhang, Shiming; Cui, Shuxia; Chen, Fen; Jia, Lianqun; Wang, Shu; Gai, Xiumei; Li, Pingfei; Yang, Feifei; Pan, Weisan; Yang, Xinggang

    2017-11-01

    The main objective of this study was to develop a pH gradient release pellet with self-emulsifying drug delivery system (SEDDS), which could not only improve the oral bioavailability of Vinpocetine (VIN), a poor soluble drug, but reduce the fluctuation of plasma concentration. First, the liquid VIN SEDDS formulation was prepared. Then the self-emulsifying pH gradient release pellets were prepared by extrusion spheronization technique, and formulation consisted by the liquid SEDDS, absorbent (colloidal silicon dioxide), penetration enhancer (sodium chloride), microcrystalline cellulose, ethyl alcohol, and three coating materials (HPMC, Eudragit L30D55, Eudragit FS30D) were eventually selected. Three kinds of coated pellets were mixed in capsules with the mass ratio of 1:1:1. The release curves of capsules were investigated in vitro under the simulated gastrointestinal conditions. In addition, the oral bioavailability and pharmacokinetics of VIN self-emulsifying pH gradient release pellets, commercial tablets and liquid VIN SEDDS were evaluated in Beagle dogs. The oral bioavailability of self-emulsifying pH gradient release pellets was about 149.8% of commercial VIN tablets, and it was about 86% of liquid VIN SEDDS, but there were no significant difference between liquid SEDDS and self-emulsifying pH gradient release pellets. In conclusion, the self-emulsifying pH gradient release pellets could significantly enhance the absorption of VIN and effectively achieve a pH gradient release. And the self-emulsifying pH gradient release pellet was a promising method to improve bioavailability of insoluble drugs.

  20. Polymer blends used to develop felodipine-loaded hollow microspheres for improved oral bioavailability.

    Science.gov (United States)

    Pi, Chao; Feng, Ting; Liang, Jing; Liu, Hao; Huang, Dongmei; Zhan, Chenglin; Yuan, Jiyuan; Lee, Robert J; Zhao, Ling; Wei, Yumeng

    2018-06-01

    Felodipine (FD) has been widely used in anti-hypertensive treatment. However, it has extremely low aqueous solubility and poor bioavailability. To address these problems, FD hollow microspheres as multiple-unit dosage forms were synthesized by a solvent diffusion evaporation method. Particle size of the hollow microspheres, types of ethylcellulose (EC), amounts of EC, polyvinyl pyrrolidone (PVP) and FD were investigated based on an orthogonal experiment of three factors and three levels. In addition, the release kinetics in vitro and pharmacokinetics in beagle dogs of the optimized FD hollow microspheres was investigated and compared with Plendil (commercial FD sustained-release tablets) as a single-unit dosage form. Results showed that the optimal formulation was composed of EC 10 cp :PVP:FD (0.9:0.16:0.36, w/w). The FD hollow microspheres were globular with a hollow structure and have high drug loading (17.69±0.44%) and floating rate (93.82±4.05%) in simulated human gastric fluid after 24h. Pharmacokinetic data showed that FD hollow microspheres exhibited sustained-release behavior and significantly improved relative bioavailability of FD compared with the control. Pharmacodynamic study showed that the FD hollow microspheres could effectively lower blood pressure. Therefore, these findings demonstrated that the hollow microspheres were an effective sustained-release delivery system for FD. Copyright © 2018 Elsevier B.V. All rights reserved.

  1. Co-extrusion as a processing technique to manufacture a dual sustained release fixed-dose combination product.

    Science.gov (United States)

    Vynckier, An-Katrien; Voorspoels, Jody; Remon, Jean Paul; Vervaet, Chris

    2016-05-01

    This study aimed to design a fixed-dose combination dosage form which provides a sustained release profile for both the freely water-soluble metformin HCl and the poorly soluble gliclazide, two antidiabetic compounds used to treat diabetes mellitus. Hot-melt co-extrusion was used as an innovative manufacturing technique for a pharmaceutical fixed-dose combination product. In this way, a matrix formulation that sustained metformin release could be developed, despite the high drug load in the formulation and the freely soluble nature of the drug. It was clear that co-extrusion was perfectly suited to produce a fixed-dose combination product with adequate properties for each of the incorporated APIs. A coat layer, containing at least 30% CAPA(®) 6506 as a hydrophobic polymer, was necessary to adequately sustain the release of the highly dosed freely soluble drug from the 70% metformin HCl-loaded CAPA(®) 6506 core of the co-extrudate. To obtain a complete gliclazide release over 24-h solubilization in Kollidon(®) VA, added as a second polymer to the CAPA(®) 6506 in the coat, was needed. Both active pharmaceutical ingredients (APIs), which have different physicochemical characteristics, were formulated in a single dosage form, using co-extrusion. © 2016 Royal Pharmaceutical Society, Journal of Pharmacy and Pharmacology.

  2. Preparation and evaluation of diclofenac sodium orally disintegrating tablets

    Directory of Open Access Journals (Sweden)

    Iancu Valeriu

    2016-06-01

    Full Text Available Orally disintegrating tablets (ODTs are dosage forms which disintegrate in mouth within seconds without need of water. This type of quality in dosage form can be attained by addition of different varieties of excipients. Pharmaburst™ 500 is a co-processed excipient system which allows rapid disintegration and low adhesion to punches. The aim of the present study was to develop and evaluate 25 mg diclofenac sodium ODTs (orodispersible tablets batches by direct compression method at different compression forces 10 kN (F1 and 20 kN (F2 and directly compressible excipients used in different ratio (Avicel PH 102, magnesium stearate and coprocessed excipient Pharmaburst™ 500, 70% and 80% w/w. The obtained batches were analyzed for appearance, tablet thickness, uniformity of weight, hardness, friability, disintegration time, and non-compendial methods (wetting time. Co-processed Pharmaburst™ 500 excipient 70% used for sodium diclofenac ODT obtaining determined good results for quality control tests evaluation.

  3. Clinical use of extended-release oral treprostinil in the treatment of pulmonary arterial hypertension

    Directory of Open Access Journals (Sweden)

    Pugliese SC

    2016-01-01

    Full Text Available Steven C Pugliese,1 Todd M Bull1,2 1Division of Pulmonary Sciences and Critical Care Medicine, Department of Medicine, 2UCD Pulmonary Vascular Disease Center, Division of Pulmonary Sciences and Critical Care Medicine and Cardiology, Department of Medicine, University of Colorado Anschutz Medical Campus, Aurora, CO, USA Abstract: The development of parenteral prostacyclin therapy marked a dramatic breakthrough in the treatment of pulmonary arterial hypertension (PAH. Intravenous (IV epoprostenol was the first PAH specific therapy and to date, remains the only treatment to demonstrate a mortality benefit. Because of the inherent complexities and risks of treating patients with continuous infusion IV therapy, there is great interest in the development of an oral prostacyclin analog that could mimic the benefits of IV therapy. Herein, we highlight the development of oral prostacyclin therapy, focusing on oral treprostinil, the only US Food and Drug Administration approved oral prostacyclin. Recent Phase III clinical trials have shown the drug to improve exercise tolerance in treatment-naïve PAH patients, but not patients on background oral therapy. Oral treprostinil appears to be most efficacious at higher doses, but its side effect profile and complexities with dosing complicate its use. While oral treprostinil’s current therapeutic role in PAH remains unclear, ongoing studies of this class of medication should help clarify their role in the treatment of PAH. Keywords: oral treprostinil, pulmonary arterial hypertension, selexipag

  4. Automatic identification and normalization of dosage forms in drug monographs

    Science.gov (United States)

    2012-01-01

    Background Each day, millions of health consumers seek drug-related information on the Web. Despite some efforts in linking related resources, drug information is largely scattered in a wide variety of websites of different quality and credibility. Methods As a step toward providing users with integrated access to multiple trustworthy drug resources, we aim to develop a method capable of identifying drug's dosage form information in addition to drug name recognition. We developed rules and patterns for identifying dosage forms from different sections of full-text drug monographs, and subsequently normalized them to standardized RxNorm dosage forms. Results Our method represents a significant improvement compared with a baseline lookup approach, achieving overall macro-averaged Precision of 80%, Recall of 98%, and F-Measure of 85%. Conclusions We successfully developed an automatic approach for drug dosage form identification, which is critical for building links between different drug-related resources. PMID:22336431

  5. Oral candidosis in relation to oral immunity.

    Science.gov (United States)

    Feller, L; Khammissa, R A G; Chandran, R; Altini, M; Lemmer, J

    2014-09-01

    Symptomatic oral infection with Candida albicans is characterized by invasion of the oral epithelium by virulent hyphae that cause tissue damage releasing the inflammatory mediators that initiate and sustain local inflammation. Candida albicans triggers pattern-recognition receptors of keratinocytes, macrophages, monocytes and dendritic cells, stimulating the production of IL-1β, IL-6 and IL-23. These cytokines induce the differentiation of Th17 cells and the generation of IL-17- and/or IL-22-mediated antifungal protective immuno-inflammatory responses in infected mucosa. Some immune cells including NKT cells, γδ T cells and lymphoid cells that are innate to the oral mucosa have the capacity to produce large quantities of IL-17 in response to C. albicans, sufficient to mediate effective protective immunity against C. albicans. On the other hand, molecular structures of commensal C. albicans blastoconidia, although detected by pattern-recognition receptors, are avirulent, do not invade the oral epithelium, do not elicit inflammatory responses in a healthy host, but induce regulatory immune responses that maintain tissue tolerance to the commensal fungi. The type, specificity and sensitivity of the protective immune response towards C. albicans is determined by the outcome of the integrated interactions between the intracellular signalling pathways of specific combinations of activated pattern-recognition receptors (TLR2, TLR4, Dectin-1 and Dectin-2). IL-17-mediated protective immune response is essential for oral mucosal immunity to C. albicans infection. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Oral Health and Women

    Centers for Disease Control (CDC) Podcasts

    2009-05-12

    This women's health podcast focuses on the importance of maintaining good oral health during pregnancy.  Created: 5/12/2009 by Office of Women’s Health (OWH) and National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 5/12/2009.

  7. Trace metal ions release from fixed orthodontic appliances and DNA damage in oral mucosa cells by in vivo studies: A literature review.

    Science.gov (United States)

    Downarowicz, Patrycja; Mikulewicz, Marcin

    2017-10-01

    An overview of professional literature referring to the release of metal ions from fixed orthodontic appliances and their influence on oral mucosa in conditions of in vivo are presented, along with a detailed analysis of the exposure of the cells of cheek mucosa epithelium to metal ions. Electronic databases (PubMed, Elsevier, Ebsco) were searched with no language restrictions. The relevant orthodontic journals and reference lists were checked for all eligible studies. A total of 38 scientific articles were retrieved in the initial search. However, only 7 articles met the inclusion criteria. Statistically significant differences in the levels of the amount of nickel ions, cobalt ions and chromium ions were observed in cells of cheek mucosa. The most biocompatible material used in the production of fixed orthodontic appliances is titanium, and the least biocompatible material is steel, which releases the largest amount of nickel and chromium. Metal ions are released from fixed orthodontic appliances only in the first phase of treatment. It is recommended to conduct further, long-term research on a larger number of patients to define the influence of using fixed orthodontic appliances and biological effect they might have on tissues.

  8. Single, 14-Day, and 13-Week Repeated Dose Toxicity Studies of Daily Oral Gelidium elegans Extract Administration to Rats

    Directory of Open Access Journals (Sweden)

    Jia Choi

    2018-01-01

    Full Text Available Gelidium elegans extract (GEE is derived from a red alga from the Asia–Pacific region, which has antioxidant, anti-adipogenic, and anti-hyperglycemic effects. However, detailed studies of the toxicology of GEE have not been performed. We evaluated the single oral dose toxicity of GEE in male and female Sprague-Dawley (CD rats. GEE did not cause deaths or have toxic effects at dosages of 5000 mg/kg/day, although compound-colored stools and diarrhea were observed in both sexes, which lasted <2 days. Therefore, the LD50 of GEE is likely to be >5000 mg/kg. We next evaluated the repeated oral dose toxicity of GEE in CD rats over 14 days and 13 weeks. GEE did not induce any significant toxicological changes in either sex at 2000 mg/kg/day. Repeated oral dose toxicity studies showed no adverse effects, in terms of clinical signs, mortality, body mass, food consumption, ophthalmic examination, urinalysis, hematology, serum biochemistry, necropsy, organ masses, or histopathology, at dosages of 500, 1000, or 2000 mg/kg/day. The no observed adverse effect level (NOAEL for GEE is thus likely to be >2000 mg/kg/day, and no pathology was identified in potential target organs. Therefore, this study indicates that repeated oral dosing with GEE is safe in CD rats.

  9. Evaluation of the effect of torsemide on warfarin dosage requirements.

    Science.gov (United States)

    Lai, Sophia; Momper, Jeremiah D; Yam, Felix K

    2017-08-01

    Background According to drug interaction databases, torsemide may potentiate the effects of warfarin. Evidence for this drug-drug interaction, however, is conflicting and the clinical significance is unknown. Objective The aim of this study is to evaluate the impact of torsemide initiation on warfarin dosage requirements. Setting This study was conducted at the Veterans Affairs Healthcare System in San Diego, California. Method A retrospective cohort study was conducted using Veterans Affairs data from patients who were converted from bumetanide to torsemide between March 2014 and July 2014. Patients were also prescribed and taking warfarin during the observation period. Warfarin dosage requirements were evaluated to determine if any changes occurred within the first 3 months of starting torsemide. Main outcome measure The primary outcome was the average weekly warfarin dose before and after torsemide initiation. Results Eighteen patients met study inclusion criteria. The weekly warfarin dose before and after initiation of torsemide was not significantly different (34 ± 15 and 34 ± 13 mg, p > 0.05). Of those eighteen patients, only two experienced elevations in INR that required a decrease in warfarin dosage after torsemide initiation. Between those two patients, dosage reductions ranged from 5.3 to 18%. Conclusion These results indicated that most patients did not require any warfarin dosage adjustments after torsemide was initiated. The potential for interaction, however, still exists. While empiric warfarin dosage adjustments are not recommended when initiating torsemide, increased monitoring is warranted to minimize the risk of adverse effects.

  10. Plasma methylphenidate concentrations in youths treated with high-dose osmotic release oral system formulation.

    Science.gov (United States)

    Stevens, Jonathan R; George, Robert A; Fusillo, Steven; Stern, Theodore A; Wilens, Timothy E

    2010-02-01

    Children and adolescents are being treated increasingly for attention-deficit/hyperactivity disorder (ADHD) with a variety of stimulants in higher than Food and Drug Administration (FDA)-approved doses and in combination with other medications. We sought to determine methylphenidate (MPH) concentrations in children and adolescents treated with high-dose, extended-release osmotic release oral system (OROS) MPH plus concomitant medications, and to examine MPH concentrations with respect to the safety and tolerability of treatment. Plasma MPH concentrations were measured by liquid chromatography-mass spectrometry 4-5 hours after administration of medication in a sample of youths diagnosed with ADHD. These youths were treated naturalistically with higher than FDA-approved doses of OROS MPH in addition to their concomitant medications. Markers of safety and tolerability (e.g., measures of blood pressure and heart rate) were also examined. Among the 17 patients (with a mean age of 16.2 +/- 2 years and a mean number of concurrent medications of 2.23 +/- 0.94), the mean plasma MPH concentration was 28 +/- 9.1 ng/mL, despite a mean daily dose of OROS MPH of 169 +/- 5 mg (3.0 +/- 0.8 mg/kg per day). No patient had a plasma MPH level >or=50 ng/mL or clinical signs of stimulant toxicity. No correlation was found between plasma MPH concentrations and OROS MPH dose or changes in vital signs. High-dose OROS MPH, used in combination with other medications, was not associated with either unusually elevated plasma MPH concentrations or with clinically meaningful changes in vital signs. Study limitations include a single time-point sampling of MPH concentrations, a small sample size, and a lack of outcome measures to address treatment effectiveness.

  11. Evidenced Based Approach for a Definition of Defined Daily Dosages of Antibiotics Used in German Pig Production

    Directory of Open Access Journals (Sweden)

    Lothar Kreienbrock

    2018-02-01

    Full Text Available The use of antibiotics in veterinary medicine and a resulting development of antimicrobial resistance is a topic of major concern. Especially for primary care, evidence is needed to guarantee the efficacy of anti­biotic drugs in future. For this, the correct dosage is an essential measure to prevent antibiotic resistance. Because veterinarians used practice differs from the manufacturer’s recommendations, data is needed to describe evidence-based defined daily doses for animals (DDDA.In 2011 data was collected on the usage of antibiotics in farm animals in conjunction with the Vet­CAb-study (Veterinary consumption of antibiotics in Germany (see vetcab-s.de, van Rennings et al., 2015. Since then, data is continuously collected on the kind of antibiotics, the number of doses, number of animals treated and treatment frequencies. For this presentation the antibiotic usage in 2011 of 500 German pig farms totalling 18,150 treatment courses were recorded and analysed with regard to their dosage. The used daily dosage (UDD was calculated from the amount of the drug used and a defined standard weight for the four different age groups in pig production: sows (200kg, piglets (4kg, weaners (15kg and fattening pigs (50 kg.Apart from the UDD the expertise of pharmacologists was also taken into account to determine a DDDA for each antibiotic. This definition of DDDA is pinpointed by the recommendation of the EMA and has to be determined for each drug in combination with animal species and the form of application.The study showed that in pig production, the antibiotic groups tetracycline and ß-lactams are mainly used. More than 90% of all treatments are given orally. For tetracycline the manufacturers recommend a dose of approximately 80 mg / kg orally in pigs. The DDDAs determined from expert opinions are around 50mg/ kg. In the present study with 500 analysed pig farms the average UDD was 39.6 mg / kg. Previous stud­ies in Germany identified an

  12. Stress free oral medication in captive cervids

    Directory of Open Access Journals (Sweden)

    G.M. Das

    2009-09-01

    Full Text Available Efficacy of oral administration of fenbendazole was studied against gastrointestinal helminthes in captive Cheetal (Axis axis at Hisar Deer Park from November 2006- January 2007. A novel method of administration of oral medication that included acclimatizing cheetal to feed individually from specific containers and providing drugs in feed after habituation was developed. Efficacy of fenbendazole was assessed by egg per gram EPG count of faecal sample on day 11 and 19 post 1st treatment and 4 days after 2nd treatment i.e. on 22nd day and compared with pre-treatment counts. Fenbendazole was efficacious against Strongyles sp., Strongyloides sp., Ascaris sp., Trichuris sp. and Moniezia sp. and significantly reduced the mean EPG of faeces, decreasing p< 0.01 after provision of drug at doses of 7.5 mg/kg body weight. The method was efficacious and provided adequate dosage to individual animals irrespective of their social hierarchy.

  13. Formulation, optimization and evaluation of levocetirizine dihyrochloride oral thin strip

    Directory of Open Access Journals (Sweden)

    J Gunjan Patel

    2012-01-01

    Full Text Available The aim of present research was to develop a fast releasing oral polymeric film, with good mechanical properties, instant disintegration and dissolution, producing an acceptable taste when placed on tongue. Solvent casting method was used to prepare oral films. Levocetirizine dihydrochloride, an antihistaminic was incorporated to relieve the symptoms of allergic rhinitis. The polymers selected were HPMC E 15 and PVA. Propylene glycol was the plasticizers used. Nine batches of films with drug were prepared using different combinations of polymers and plasticizer concentration. The resultant films were evaluated for weight variation, content uniformity, folding endurance, thickness, surface pH, in vitro disintegration and in vitro dissolution. The optimized films which disintegrated in less than 30 sec, releasing 85-98% of drug within 2 minutes. The percentage release was varying with concentration of plasticizer and polymer. The films made with HPMC: PVA (1:2 released 96% of drug in 1 min, which was the best release amongst all.

  14. Improved oral absorption of cilostazol via sulfonate salt formation with mesylate and besylate

    Directory of Open Access Journals (Sweden)

    Seo JH

    2015-07-01

    Full Text Available Jae Hong Seo, Jung Bae Park, Woong-Kee Choi, Sunhwa Park, Yun Jin Sung, Euichaul Oh, Soo Kyung Bae College of Pharmacy and Integrated Research Institute of Pharmaceutical Sciences, The Catholic University of Korea, Bucheon, South Korea Objective: Cilostazol is a Biopharmaceutical Classification System class II drug with low solubility and high permeability, so its oral absorption is variable and incomplete. The aim of this study was to prepare two sulfonate salts of cilostazol to increase the dissolution and hence the oral bioavailability of cilostazol.Methods: Cilostazol mesylate and cilostazol besylate were synthesized from cilostazol by acid addition reaction with methane sulfonic acid and benzene sulfonic acid, respectively. The salt preparations were characterized by nuclear magnetic resonance spectroscopy. The water contents, hygroscopicity, stress stability, and photostability of the two cilostazol salts were also determined. The dissolution profiles in various pH conditions and pharmacokinetic studies in rats were compared with those of cilostazol-free base.Results: The two cilostazol salts exhibited good physicochemical properties, such as nonhygroscopicity, stress stability, and photostability, which make it suitable for the preparation of pharmaceutical formulations. Both cilostazol mesylate and cilostazol besylate showed significantly improved dissolution rate and extent of drug release in the pH range 1.2–6.8 compared to the cilostazol-free base. In addition, after oral administration to rats, cilostazol mesylate and cilostazol besylate showed increases in Cmax and AUCt of approximately 3.65- and 2.87-fold and 3.88- and 2.94-fold, respectively, compared to cilostazol-free base.Conclusion: This study showed that two novel salts of cilostazol, such as cilostazol mesylate and cilostazol besylate, could be used to enhance its oral absorption. The findings warrant further preclinical and clinical studies on cilostazol mesylate and

  15. Application of DBNPA dosage for biofouling control in spiral wound membrane systems

    KAUST Repository

    Siddiqui, Amber

    2017-05-30

    Biocides may be used to control biofouling in spiral-wound reverse osmosis (RO) and nanofiltration (NF) systems. The objective of this study was to investigate the effect of biocide 2,2-dibromo-3-ni-trilopropionamide (DBNPA) dosage on biofouling control. Preventive biofouling control was studied applying a continuous dosage of substrate (0.5 mg/L) and DBNPA (1 mg/L). Curative biofouling control was studied on pre-grown biofilms, once again applying a continuous dosage of substrate (0.5 mg acetate C/L) and DBNPA (1 and 20 mg/L). Biofouling studies were performed in membrane fouling simulators (MFSs) supplied with biodegradable substrate and DBNPA. The pressure drop was monitored in time and at the end of the study, the accumulated biomass in MFS was quantified by adenosine triphosphate (ATP) and total organic carbon (TOC) analysis. Continuous dosage of DBNPA (1 mg/L) prevented pressure drop increase and biofilm accumulation in the MFSs during a run time of 7 d, showing that biofouling can be managed by preventive DBNPA dosage. For biofouled systems, continuous dosage of DBNPA (1 and 20 mg/L) inactivated the accumulated biomass but did not restore the original pressure drop and did not remove the accumulated inactive cells and extracellular polymeric substances (EPS), indicating DBNPA dosage is not suitable for curative biofouling control.

  16. Quality of 'Climax' blueberries after low dosage electron beam irradiation

    International Nuclear Information System (INIS)

    Miller, W.R.; McDonald, R.E.; McCollum, T.G.; Smittle, B.J.

    1994-01-01

    Fruit of 'Climax' rabbiteye blueberries (Vaccinium ashei Reade) were irradiated by a linear accelerator at 0, 0.25, 0.5, 0.75, 1.0, and 1.25 kGy and evaluated for various quality attributes after storage for 1, 3, 7, or 14 days at 1C plus 2 days at 15C, respectively. Weight loss increased during storage and averaged 4.2% after the final inspection and was not affected by irradiation dosage. About 5% of total berries were decayed after 14 days at 1C, about 6% after the final inspection at 15C, but decay was not affected by the level of irradiation. Electrolyte leakage, skin color, total soluble solids, acidity, and pH were also not affected by irradiation dosage. There was a significant decline in berry firmness, flavor, and texture as dosage increased. Berries treated at 1.0 kGy or above were softer and had lower flavor and texture preference scores than berries treated at lower dosages or nontreated berries

  17. Oral and transdermal drug delivery systems: role of lipid-based lyotropic liquid crystals

    Directory of Open Access Journals (Sweden)

    Rajabalaya R

    2017-02-01

    Full Text Available Rajan Rajabalaya, Muhammad Nuh Musa, Nurolaini Kifli, Sheba R David PAPRSB Institute of Health Sciences, Universiti Brunei Darussalam, Brunei Darussalam Abstract: Liquid crystal (LC dosage forms, particularly those using lipid-based lyotropic LCs (LLCs, have generated considerable interest as potential drug delivery systems. LCs have the physical properties of liquids but retain some of the structural characteristics of crystalline solids. They are compatible with hydrophobic and hydrophilic compounds of many different classes and can protect even biologicals and nucleic acids from degradation. This review, focused on research conducted over the past 5 years, discusses the structural evaluation of LCs and their effects in drug formulations. The structural classification of LLCs into lamellar, hexagonal and micellar cubic phases is described. The structures of these phases are influenced by the addition of surfactants, which include a variety of nontoxic, biodegradable lipids; these also enhance drug solubility. LLC structure influences drug localization, particle size and viscosity, which, in turn, determine drug delivery properties. Through several specific examples, we describe the applications of LLCs in oral and topical drug formulations, the latter including transdermal and ocular delivery. In oral LLC formulations, micelle compositions and the resulting LLC structures can determine drug solubilization and stability as well as intestinal transport and absorption. Similarly, in topical LLC formulations, composition can influence whether the drug is retained in the skin or delivered transdermally. Owing to their enhancement of drug stability and promotion of controlled drug delivery, LLCs are becoming increasingly popular in pharmaceutical formulations. Keywords: liquid crystal, drug delivery, controlled release, lyotropic, surfactants, drug localization

  18. What is the optimum maximal gonadotropin dosage used in microdose flare-up cycles in poor responders?

    Science.gov (United States)

    Berkkanoglu, Murat; Ozgur, Kemal

    2010-07-01

    To find out the optimum maximal dosage of recombinant follicle stimulating hormone (rFSH) in microdose gonadotropin-releasing hormone analog (GnRH-a) flare cycles in poor responders. Prospective randomized study. Private infertility clinic. A total of 119 women were taken into the study. The study group underwent a microdose protocol with a GnRH-agonist followed by rFSH administration. On the third day of GnRH-a administration, 119 patients were randomized in three groups to receive daily fixed doses of 300 IU of rFSH (group A, n = 38), or 450 IU of rFSH (group B, n = 39), or 600 IU of rFSH (group C, n = 42). Peak E(2) levels, days of stimulation with rFSH, total rFSH dosage, total number of oocytes retrieved, M2 oocytes retrieved, total number of embryos, number of embryos transferred, number of Grade-1 embryos transferred, clinical pregnancy rate (positive fetal cardiac activity), and cancellation rates of stimulation and embryo transfer. Clinical pregnancy rates were 13.1%, 15.3%, and 16.1% for group A, group B, and group C, respectively. There were no significant differences in the age, peak serum E(2) concentration, days of stimulation with rFSH, total number of M2 oocytes retrieved, number of embryos transferred, clinical pregnancy rates, and cancellation rates of stimulation and embryo transfer between the three groups except for total rFSH dosage. There is no need to use doses above 300 IU of rFSH to increase the pregnancy rate in microdose cycles. In addition, because the duration of stimulation does not differ between the groups, the usage of 300 IU rFSH in microdose cycles results in less total amount of rFSH consumed in a cycle compared with higher dosages, and this would obviously cost less money to the patients. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  19. Near-infrared induced release for localized on-demand drug delivery

    NARCIS (Netherlands)

    Vertommen, M.A.M.E.

    2009-01-01

    By non-invasive external triggering of drug release from an implant, pulsewise administration can be realized according to the patient’s needs and at specific locations in the human body. In comparison to more traditional delivery forms (e.g. oral or by injection), externally triggered drug release

  20. In Vitro-In Vivo Predictive Dissolution-Permeation-Absorption Dynamics of Highly Permeable Drug Extended-Release Tablets via Drug Dissolution/Absorption Simulating System and pH Alteration.

    Science.gov (United States)

    Li, Zi-Qiang; Tian, Shuang; Gu, Hui; Wu, Zeng-Guang; Nyagblordzro, Makafui; Feng, Guo; He, Xin

    2018-05-01

    Each of dissolution and permeation may be a rate-limiting factor in the absorption of oral drug delivery. But the current dissolution test rarely took into consideration of the permeation property. Drug dissolution/absorption simulating system (DDASS) valuably gave an insight into the combination of drug dissolution and permeation processes happening in human gastrointestinal tract. The simulated gastric/intestinal fluid of DDASS was improved in this study to realize the influence of dynamic pH change on the complete oral dosage form. To assess the effectiveness of DDASS, six high-permeability drugs were chosen as model drugs, including theophylline (pK a1  = 3.50, pK a2  = 8.60), diclofenac (pK a  = 4.15), isosorbide 5-mononitrate (pK a  = 7.00), sinomenine (pK a  = 7.98), alfuzosin (pK a  = 8.13), and metoprolol (pK a  = 9.70). A general elution and permeation relationship of their commercially available extended-release tablets was assessed as well as the relationship between the cumulative permeation and the apparent permeability. The correlations between DDASS elution and USP apparatus 2 (USP2) dissolution and also between DDASS permeation and beagle dog absorption were developed to estimate the predictability of DDASS. As a result, the common elution-dissolution relationship was established regardless of some variance in the characteristic behavior between DDASS and USP2 for drugs dependent on the pH for dissolution. Level A in vitro-in vivo correlation between DDASS permeation and dog absorption was developed for drugs with different pKa. The improved DDASS will be a promising tool to provide a screening method on the predictive dissolution-permeation-absorption dynamics of solid drug dosage forms in the early-phase formulation development.

  1. Effectiveness of motivational interviewing at improving oral health: a systematic review

    Directory of Open Access Journals (Sweden)

    Andreia Morales Cascaes

    2014-02-01

    Full Text Available OBJECTIVE : To analyze the effectiveness of motivational interviewing (MI at improving oral health behaviors (oral hygiene habits, sugar consumption, dental services utilization or use of fluoride and dental clinical outcomes (dental plaque, dental caries and periodontal status. METHODS : A systematic search of PubMed, LILACS, SciELO, PsyINFO, Cochrane and Google Scholar bibliographic databases was conducted looking for intervention studies that investigated MI as the main approach to improving the oral health outcomes investigated. RESULTS : Of the 78 articles found, ten met the inclusion criteria, all based on randomized controlled trials. Most studies (n = 8 assessed multiple outcomes. Five interventions assessed the impact of MI on oral health behaviors and nine on clinical outcomes (three on dental caries, six on dental plaque, four on gingivitis and three on periodontal pockets. Better quality of evidence was provided by studies that investigated dental caries, which also had the largest population samples. The evidence of the effect of MI on improving oral health outcomes is conflicting. Four studies reported positive effects of MI on oral health outcomes whereas another four showed null effect. In two interventions, the actual difference between groups was not reported or able to be recalculated. CONCLUSIONS : We found inconclusive effectiveness for most oral health outcomes. We need more and better designed and reported interventions to fully assess the impact of MI on oral health and understand the appropriate dosage for the counseling interventions.

  2. A Phase 1 Pharmacokinetic Study of Cysteamine Bitartrate Delayed-Release Capsules Following Oral Administration with Orange Juice, Water, or Omeprazole in Cystinosis.

    Science.gov (United States)

    Armas, Danielle; Holt, Robert J; Confer, Nils F; Checani, Gregg C; Obaidi, Mohammad; Xie, Yuli; Brannagan, Meg

    2018-02-01

    Cystinosis is a rare, metabolic, autosomal recessive, genetic lysosomal storage disorder characterized by an accumulation of cystine in various organs and tissues. Cysteamine bitartrate (CB) is a cystine-depleting aminothiol agent approved in the United States and Europe in immediate-release and delayed-release (DR) formulations for the treatment of nephropathic cystinosis in children and adults. It is recommended that CBDR be administered with fruit juice (except grapefruit juice) for maximum absorption. Omeprazole is a proton pump inhibitor that inhibits gastric acid secretion and, theoretically, may cause the premature release of cysteamine by increasing intragastric pH, thereby affecting the PK of CBDR. This open-label, three-period, randomized study in healthy adult subjects was designed primarily to compare the pharmacokinetics of CBDR capsules after a single oral dose administered with orange juice, water, or multiple oral doses of omeprazole with water at steady state. A total of 32 subjects were randomly assigned to receive study agents in one of two treatment sequences. All subjects completed the study and baseline characteristics of the overall population and the two treatment sequence populations were similar. Peak mean plasma cysteamine concentrations following co-administration of CBDR capsules with orange juice (1892 ng/mL) were higher compared with co-administration with water (1663 ng/mL) or omeprazole 20 mg and water (1712 ng/mL). Mean time to peak plasma concentration was shorter with omeprazole co-administration (2.5 h) compared with orange juice (3.5 h) or water (3.0 h). Statistical comparisons between treatment groups indicated that exposure as assessed by AUC 0-t , AUC 0-∞ , and C max were all within the 80-125% bioequivalence ranges for all comparisons. All treatments were generally well tolerated. Overall, the pharmacokinetics of cysteamine bitartrate DR capsules are not significantly impacted by co-administration with orange juice

  3. Development of Alginate Microspheres Containing Chuanxiong for Oral Administration to Adult Zebrafish

    Directory of Open Access Journals (Sweden)

    Li-Jen Lin

    2016-01-01

    Full Text Available Oral administration of Traditional Chinese Medicine (TCM by patients is the common way to treat health problems. Zebrafish emerges as an excellent animal model for the pharmacology investigation. However, the oral delivery system of TCM in zebrafish has not been established so far. This issue was addressed by development of alginate microparticles for oral delivery of chuanxiong, a TCM that displays antifibrotic and antiproliferative effects on hepatocytes. The delivery microparticles were prepared from gelification of alginate containing various levels of chuanxiong. The chuanxiong-encapsulated alginate microparticles were characterized for their solubility, structure, encapsulation efficiency, the cargo release profile, and digestion in gastrointestinal tract of zebrafish. Encapsulation of chuanxiong resulted in more compact structure and the smaller size of microparticles. The release rate of chuanxiong increased for alginate microparticles carrying more chuanxiong in simulated intestinal fluid. This remarkable feature ensures the controlled release of encapsulated cargos in the gastrointestinal tract of zebrafish. Moreover, chuanxiong-loaded alginate microparticles were moved to the end of gastrointestinal tract after oral administration for 6 hr and excreted from the body after 16 hr. Therefore, our developed method for oral administration of TCM in zebrafish is useful for easy and rapid evaluation of the drug effect on disease.

  4. Effect of a new drug releasing system on microencapsulated islet transplantation

    Science.gov (United States)

    Lu, Binjie; Gao, Qingkun; Liu, Rui; Ren, Ming; Wu, Yan; Jiang, Zaixing; Zhou, Yi

    2015-01-01

    Objective: This study aimed to develop a novel release system for grafted islets. Materials and methods: A graphene oxide-FTY720 release system was constructed to test the drug loading and releasing capacity. The recipient rats were divided into four groups as following: Experiment group A (EG A) and B (EG B); Control group A (CG A) and B (CG B). In each group, (2000±100) IEQ microencapsulated islets were implanted into the abdominal cavity of the recipients with oral FTY720, local graphene oxide-FTY720 injection, without immunosuppressants, and with graphene oxide-saturated solution respectively. We detected the immunological data, the blood glucose level, and pericapsular overgrowth to show the transplantation effect. Results: 31% of adsorptive FTY720 was released within 6 h, and 82% of FTY720 was released within 48 h. From day 5 to 8, the amount of PBL in EG B was significantly less than those in EG A (PGraphene oxide-FTY720 complex showed a drug releasing effect. Local application of graphene-FTY720 releasing system could decrease the amount of peripheral blood lymphocytes (PBL) and the percentage of CD3 and CD8 T lymphocytes in blood for longer time than oral drug application. This releasing system could achieve a better blood glucose control. PMID:26722425

  5. Dosage compensation and demasculinization of X chromosomes in Drosophila.

    Science.gov (United States)

    Bachtrog, Doris; Toda, Nicholas R T; Lockton, Steven

    2010-08-24

    The X chromosome of Drosophila shows a deficiency of genes with male-biased expression, whereas mammalian X chromosomes are enriched for spermatogenesis genes expressed premeiosis and multicopy testis genes. Meiotic X-inactivation and sexual antagonism can only partly account for these patterns. Here, we show that dosage compensation (DC) in Drosophila may contribute substantially to the depletion of male genes on the X. To equalize expression between X-linked and autosomal genes in the two sexes, male Drosophila hypertranscribe their single X, whereas female mammals silence one of their two X chromosomes. We combine fine-scale mapping data of dosage compensated regions with genome-wide expression profiles and show that most male-biased genes on the D. melanogaster X are located outside dosage compensated regions. Additionally, X-linked genes that have newly acquired male-biased expression in D. melanogaster are less likely to be dosage compensated, and parental X-linked genes that gave rise to an autosomal male-biased retrocopy are more likely located within compensated regions. This suggests that DC contributes to the observed demasculinization of X chromosomes in Drosophila, both by limiting the emergence of male-biased expression patterns of existing X genes, and by contributing to gene trafficking of male genes off the X. Copyright 2010 Elsevier Ltd. All rights reserved.

  6. Polymeric Micro- and Nanofabricatced Devices for Oral Drug Delivery

    Science.gov (United States)

    Fox, Cade Brylee

    While oral drug administration is by far the most preferred route, it is accompanied by many barriers that limit drug uptake such as the low pH of the stomach, metabolic and proteolytic enzymes, and limited permeability of the intestinal epithelium. As a result, many drugs ranging from small molecules to biological therapeutics have limited oral bioavailability, precluding them from oral administration. To address this issue, microfabrication has been applied to create planar, asymmetric devices capable of binding to the lining of the gastrointestinal tract and releasing drug at high concentrations, thereby increasing oral drug uptake. While the efficacy of these devices has been validated in vitro and in vivo, modifying their surfaces with nanoscale features has potential to refine their properties for enhanced drug delivery. This dissertation first presents an approach to fabricate polymeric microdevices coated with nanowires in a rapid, high throughput manner. The nanowires demonstrate rapid drug localization onto the surface of these devices via capillary action and increased adhesion to epithelial tissue, suggesting that this fabrication technique can be used to create devices with enhanced properties for oral drug delivery. Also presented are microdevices sealed with nanostraw membranes. The nanostraw membranes provide sustained drug release by limiting drug efflux from the devices, prevent drug degradation by limiting influx of outside biomolecules, and enhance device bioadhesion by penetrating into the mucus layer of the intestinal lining. Finally, an approach that dramatically increases the capacity and efficiency of drug loading into microdevices over previous methods is presented. A picoliter-volume printer is used to print drug directly into device reservoirs in an automated fashion. The technologies presented here expand the capabilities of microdevices for oral drug delivery by incorporating nanoscale structures that enhance device bioadhesion

  7. Pharmaceutical optimization of lipid-based dosage forms for the improvement of taste-masking, chemical stability and solubilizing capacity of phenobarbital.

    Science.gov (United States)

    Monteagudo, Ezequiel; Langenheim, Mariana; Salerno, Claudia; Buontempo, Fabián; Bregni, Carlos; Carlucci, Adriana

    2014-06-01

    Microemulsions (MEs) and self-emulsifying drug delivery systems (SEEDS) containing phenobarbital (Phe) were developed to improve its chemical stability, solubilizing capacity and taste-masking in oral liquid dosage forms. Cremophor® RH40 and Labrasol® were used as surfactants for the screening of ME regions, Capmul® MCM L, Captex® 355, Imwitor® 408, Myglyol® 840 and Isopropyl myristate were the oil phases assayed; Transcutol® P, Polyethylene-glycol 400, glycerol, Propylene-glycol and ethanol the cosurfactants. Phe stability assay was carried out (20:4:20:56% and 20:4:35:41% (w/w); surfactant:oily phase:cosurfactant:water) for both surfactants; only one containing ethanol showed significant dismissing in its drug content. Solubility capacity for these selected formulations were also evaluated, an amount between 17 and 58 mg/mL of Phe could be loaded. At last, an optimized ME formulation with Cremophor® RH40 20%, Capmul® MCM L 4%, PEG 400 35% and sucralose 2% (w/w) was chosen in order to optimize taste-masking using an electronic tongue. Strawberry along with banana and tutti-frutti flavors plus mint flavor proved to be the best ones. Labrasol-based pre-concentrates were tested for (micro)emulsifying properties; all of them resulted to behave as SEDDS. In summary, a rationale experimental design conducted to an optimized ME for Phe oral pediatric administration which was able to load 5-fold times the currently used dose (4 mg/mL), with no sign of physical or chemical instability and with improved taste; SEDDS for capsule filling were also obtained. The biopharmaceutical advantages described for these dosage forms encourage furthering in vivo evaluation.

  8. Bilayered buccal films as child-appropriate dosage form for systemic administration of propranolol.

    Science.gov (United States)

    Abruzzo, Angela; Nicoletta, Fiore Pasquale; Dalena, Francesco; Cerchiara, Teresa; Luppi, Barbara; Bigucci, Federica

    2017-10-05

    Buccal mucosa has emerged as an attractive site for systemic administration of drug in paediatric patients. This route is simple and non-invasive, even if the saliva wash-out effect and the relative permeability of the mucosa can reduce drug absorption. Mucoadhesive polymers represent a common employed strategy to increase the contact time of the formulation at the application site and to improve drug absorption. Among the different mucoadhesive dosage forms, buccal films are particularly addressed for paediatric population since they are thin, adaptable to the mucosal surface and able to offer an exact and flexible dose. The objective of the present study was to develop bilayered buccal films for the release of propranolol hydrochloride. A primary polymeric layer was prepared by casting and drying of solutions of film-forming polymers, such as polyvinylpyrrolidone (PVP) or polyvinylalcohol (PVA), added with different weight ratios of gelatin (GEL) or chitosan (CH). In order to achieve unidirectional drug delivery towards buccal mucosa, a secondary ethylcellulose layer was applied onto the primary layer. Bilayered films were characterized for their physico-chemical (morphology, thickness, drug content and solid state) and functional (water uptake, mucoadhesion, drug release and permeation) properties. The inclusion of CH into PVP and PVA primary layer provided the best mucoadhesion ability. Films containing CH provided a lower drug release with respect to films containing GEL and increased the amount of permeated drug through buccal mucosa, thanks to its ability of interfering with the lipid organization. The secondary ethylcellulose layer did not interfere with drug permeation, but it could limit drug release in the buccal cavity. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. The shaping and functional consequences of the dosage effect landscape in multiple myeloma.

    Science.gov (United States)

    Samur, Mehmet K; Shah, Parantu K; Wang, Xujun; Minvielle, Stéphane; Magrangeas, Florence; Avet-Loiseau, Hervé; Munshi, Nikhil C; Li, Cheng

    2013-10-02

    Multiple myeloma (MM) is a malignant proliferation of plasma B cells. Based on recurrent aneuploidy such as copy number alterations (CNAs), myeloma is divided into two subtypes with different CNA patterns and patient survival outcomes. How aneuploidy events arise, and whether they contribute to cancer cell evolution are actively studied. The large amount of transcriptomic changes resultant of CNAs (dosage effect) pose big challenges for identifying functional consequences of CNAs in myeloma in terms of specific driver genes and pathways. In this study, we hypothesize that gene-wise dosage effect varies as a result from complex regulatory networks that translate the impact of CNAs to gene expression, and studying this variation can provide insights into functional effects of CNAs. We propose gene-wise dosage effect score and genome-wide karyotype plot as tools to measure and visualize concordant copy number and expression changes across cancer samples. We find that dosage effect in myeloma is widespread yet variable, and it is correlated with gene expression level and CNA frequencies in different chromosomes. Our analysis suggests that despite the enrichment of differentially expressed genes between hyperdiploid MM and non-hyperdiploid MM in the trisomy chromosomes, the chromosomal proportion of dosage sensitive genes is higher in the non-trisomy chromosomes. Dosage-sensitive genes are enriched by genes with protein translation and localization functions, and dosage resistant genes are enriched by apoptosis genes. These results point to future studies on differential dosage sensitivity and resistance of pro- and anti-proliferation pathways and their variation across patients as therapeutic targets and prognosis markers. Our findings support the hypothesis that recurrent CNAs in myeloma are selected by their functional consequences. The novel dosage effect score defined in this work will facilitate integration of copy number and expression data for identifying driver

  10. Midazolam intravenous conscious sedation in oral surgery. A retrospective study of 372 cases.

    Science.gov (United States)

    Runes, J; Ström, C

    1996-01-01

    In 1987 the Swedish Dental Act was amended to allow Swedish dentists who have undergone a specific accreditation course to administer intra-venous sedation. Midazolam is a benzodiazepin derivate with express sedative and hypnotic qualities, powerful amnesia, a short half-life time and few secondary effects. From 1989-1994 midazolam intravenous conscious sedation (ICS) was administered in 372 cases in the Department of Oral and Maxillofacial Surgery, County Hospital, Falun. This study presents data on the 298 patients. Although surgical removal of impacted wisdom teeth predominated, implant surgery, reduction of fractures and correction of anomalies were also carried out. Supplementary sedative premedication was rarely used. Most patients were treated under local anaesthesia. The mean dosage was 10.45 mg (range 1.25-40 mg). Mean dosage/kg was 0.15 mg (range 0.03-0.50 mg). The average duration of anaesthesia was 50 minutes. The average recovery time was 94 minutes. Three hundred and sixty-nine of 372 planned treatments were completed. No serious complications occurred. The patients were co-operative during surgery and were satisfied with the treatment. Compared with full anaesthesia this method required less resources and is a valuable complement in management of anxious patients undergoing oral surgery.

  11. Doubled dosage of sofosbuviris expected for inhibiting Zika virus infection

    Institute of Scientific and Technical Information of China (English)

    Somsri Wiwanitkit; Viroj Wiwanitkit

    2017-01-01

    Sofosbuvir is a new antiviral drug that has been recommended for management of hepatitis C virus (HCV) for a few years. New researches support that sofosbuvir might be useful for the management of Zika virus infection. Based on the pharmacological activity, inhibiting the HCV RNA-dependent RNA polymerase (RdRp or NS5 protein), sofosbuvir is proposed for its effectiveness against Zika virus infection. Here, the authors used a mathematical modelling theoretical approach to predict the expected dosage of sofosbuvir for inhibiting Zika virus infection. Based on the modeling study, if sofosbuvir is assigned for management of Zika virus infection, doubled dosage of the present dosage for hepatitis C management is recommended.

  12. Dosage of boron traces in graphite, uranium and beryllium oxide

    International Nuclear Information System (INIS)

    Coursier, J.; Hure, J.; Platzer, R.

    1955-01-01

    The problem of the dosage of the boron in the materials serving to the construction of nuclear reactors arises of the following way: to determine to about 0,1 ppm close to the quantities of boron of the order of tenth ppm. We have chosen the colorimetric analysis with curcumin as method of dosage. To reach the indicated contents, it is necessary to do a previous separation of the boron and the materials of basis, either by extraction of tetraphenylarsonium fluoborate in the case of the boron dosage in uranium and the beryllium oxide, either by the use of a cations exchanger resin of in the case of graphite. (M.B.) [fr

  13. Application of tumbling melt granulation (TMG) method to prepare controlled-release fine granules.

    Science.gov (United States)

    Maejima, T; Kubo, M; Osawa, T; Nakajima, K; Kobayashi, M

    1998-03-01

    The tumbling melt granulation (TMG) method was applied to prepare controlled-release fine granules of diltiazem hydrochloride (DH). The entire process, from the preparation of the cores by the adherence of DH to the sucrose crystal to the subsequent coating of the controlled-release layer, was performed without using any solvent. A mixture of meltable material, talc, and ethylcellulose was used for the controlled-release layer and controlled-release fine granules approximately 400 microns in diameter were obtained with excellent producibility. The dissolution rate of DH from these fine granules was similar to that of a once-a-day dosage form obtained in the market; further, the dependency of the dissolution profile on pH of the media was less. Thus, it was concluded that this TMG method was very useful for preparing not only controlled-release beads of granule size (usually 500 to 1400 microns) but also fine granules.

  14. Brand versus generic dispensing trend for ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg (oral dosage forms) among pharmacies of Karachi, Pakistan.

    Science.gov (United States)

    Zehra, Fatima; Naqvi, Atta Abbas; Tasneem, Sumbul; Ahmad, Rizwan; Ahmad, Niyaz; Shamsi, Adnan Zia; Asghar, Naqiya Ali; Khan, Ghufran Ullah

    2017-01-01

    Pakistan spends 0.7% of its gross domestic product on health. The public sector health-care system provides services to 22% of population thus paving the way for a dominant private sector. Patients in Pakistan mostly pay their medical expenses directly, and 64% of the health expenditures are borne by the household. Expenditure on medicine constitutes 43% of the total household expenditure. A quantitative cross-sectional study was conducted in Karachi, Pakistan, for a month. It was aimed at gathering response from different pharmacies to understand the brand versus generic dispensing trend of ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg oral dosage forms. The study employed convenience sampling and used a survey checklist. The data gathered was entered in SPSS version 22. The mean price per tablet for ciprofloxacin brand and generic was reported at Pakistani Rupees (PKR) 48.44 and PKR 26.85, respectively. The trend for dispensing ciprofloxacin highlighted a split in the market between brand (51%) and generic (49%). For levofloxacin brand and generic, the price per tablet was reported at PKR 36.50 and PKR 36.15 respectively, and despite same price, the market was dominated by generic levofloxacin (92%). Due to a price difference between brand and generic moxifloxacin, i.e., PKR 129.44 and PKR 71.91, respectively, the market was mostly occupied by the generic form (75%). Pricing mechanism must be revisited, and the authorities should take stern actions against any illegitimate price hike. The surging burden of drug expenditure on poorer sections of the society must be addressed by the government on an urgent basis.

  15. TaS2 nanosheet-based room-temperature dosage meter for nitric oxide

    Directory of Open Access Journals (Sweden)

    Qiyuan He

    2014-09-01

    Full Text Available A miniature dosage meter for toxic gas is developed based on TaS2 nanosheets, which is capable of indicating the toxic dosage of trace level NO at room temperature. The TaS2 film-based chemiresistor shows an irreversible current response against the exposure of NO. The unique non-recovery characteristic makes the TaS2 film-based device an ideal indicator of total dosage of chronicle exposure.

  16. Absolute Oral Bioavailability of Creatine Monohydrate in Rats: Debunking a Myth.

    Science.gov (United States)

    Alraddadi, Eman A; Lillico, Ryan; Vennerstrom, Jonathan L; Lakowski, Ted M; Miller, Donald W

    2018-03-08

    Creatine is an ergogenic compound used by athletes to enhance performance. Supplementation with creatine monohydrate (CM) has been suggested for musculoskeletal and neurological disorders. Until now, little is known about its pharmacokinetic profile. Our objective was to determine the oral bioavailability of CM and the influence of dose on oral absorption. Rats were dosed orally with low dose (10 mg/kg) or high dose (70 mg/kg) 13 C-labeled CM. Blood samples were removed at various time points. Muscle and brain tissue were collected at the conclusion of the study. Plasma and tissue levels of 13 C-labeled creatine were determined using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Physiologically based pharmacokinetic (PBPK) models of CM were built using GastroPlus™. These models were used to predict the plasma concentration-time profiles of creatine hydrochloride (CHCL), which has improved aqueous solubility compared to CM. Absolute oral bioavailability for low dose CM was 53% while high dose CM was only 16%. The simulated C max of 70 mg/kg CHCL was around 35 μg/mL compared to 14 μg/mL for CM with a predicted oral bioavailability of 66% with CHCL compared to 17% with CM. Our results suggest that the oral bioavailability of CM is less than complete and subject to dose and that further examination of improved dosage formulations of creatine is warranted.

  17. Role of various natural, synthetic and semi-synthetic polymers on drug release kinetics of losartan potassium oral controlled release tablets.

    Science.gov (United States)

    Jayasree, J; Sivaneswari, S; Hemalatha, G; Preethi, N; Mounika, B; Murthy, S Vasudeva

    2014-10-01

    The objective of the present work was to formulate and to characterize controlled release matrix tablets of losartan potassium in order to improve bioavailability and to minimize the frequency of administration and increase the patient compliance. Losartan potassium controlled release matrix tablets were prepared by direct compression technique by the use of different natural, synthetic and semisynthetic polymers such as gum copal, gum acacia, hydroxypropyl methyl cellulose K100 (HPMC K100), eudragit RL 100 and carboxy methyl ethyl cellulose (CMEC) individually and also in combination. Studies were carried out to study the influence of type of polymer on drug release rate. All the formulations were subjected to physiochemical characterization such as weight variation, hardness, thickness, friability, drug content, and swelling index. In vitro dissolution studies were carried out simulated gastric fluid (pH 1.2) for first 2 h and followed by simulated intestinal fluid (pH 6.8) up to 24 h, and obtained dissolution data were fitted to in vitro release kinetic equations in order to know the order of kinetics and mechanism of drug release. Results of physiochemical characterization of losartan potassium matrix tablets were within acceptable limits. Formulation containing HPMC K100 and CMEC achieved the desired drug release profile up to 24 h followed zero order kinetics, release pattern dominated by Korsmeyer - Peppas model and mechanism of drug release by nonfickian diffusion. The good correlation obtained from Hixson-Crowell model indicates that changes in surface area of the tablet also influences the drug release. Based on the results, losartan potassium controlled release matrix tablets prepared by employing HPMC K100 and CMEC can attain the desired drug release up to 24 h, which results in maintaining steady state concentration and improving bioavailability.

  18. A brief history of dosage compensation

    Indian Academy of Sciences (India)

    depression of X-linked gene activity in the female, as well as by hyperexpression of the ... to the Harvey lecture, Muller had presented important ideas relative to dosage ... at Columbia. I do recall a talk by the popular physical anthro- pologist ...

  19. Oral Health and Older Adults

    Centers for Disease Control (CDC) Podcasts

    2008-10-27

    This podcast discusses the importance of older adults maintaing good oral health habits. It is primarily targeted to public health and aging services professionals.  Created: 10/27/2008 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 10/27/2008.

  20. Dissolution and oral bioavailability enhancement of praziquantel by solid dispersions.

    Science.gov (United States)

    Liu, Yanyan; Wang, Tianzi; Ding, Wenya; Dong, Chunliu; Wang, Xiaoting; Chen, Jianqing; Li, Yanhua

    2018-06-01

    The aim of the present investigation was to enhance the solubility, dissolution, and oral bioavailability of praziquantel (PZQ), a poorly water-soluble BCS II drug (Biopharmaceutical Classification System), using a solid dispersion (SD) technique involving hydrophilic copolymers. The SD formulations were prepared by a solvent evaporation method with PZQ and PEG 4000 (polyethylene glycol 4000), PEG 6000, or P 188 polymers at various weight ratios or a combination of PEG 4000/P 188. The optimized SD formulation, which had the highest solubility in distilled water, was further characterized by its surface morphology, crystallinity, and dissolution in 0.1 M HCl with 0.2% w/v of sodium dodecyl sulfate (SDS). X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed the amorphous form of PZQ in the SDs. Moreover, at an oral dosage of 5 mg/kg PZQ, the SDs had higher C max values and areas under the curve (AUCs) compared to those of commercial PZQ tablets. Preparation of PZQ-loaded SDs using PEG 4000/P 188 is a promising strategy to improve the oral bioavailability of PZQ.

  1. Isoniazid release from suppositories compounded with selected bases.

    Science.gov (United States)

    Hudson, Kristofer C; Asbill, C Scott; Webster, Andrew A

    2007-01-01

    There is an increasing need for an alternative route of isoniazid adminstration for prophylaxis and treatment of tuberculosis in children. The purpose of this study is to evaluate the in vitro release of isoniazid from extemporaneously compounded isoniazid suppositories with a goal of optimizing the suppository dosage form for this indication. Suppositories were compounded using three different base formulations (cocoa butter, Witepsol H15 Base F, and a combination of polyethylene glycols 3350, 1000, and 400). The release profiles of six compounded suppositories with isoniazid (100 mg) were tested with a United States Pharmacopeial Convention-approved dissolution apparatus. Isoniazid concentrations at predetermined time points were determined using high-performance liquid chromatographic analysis. The results show that drug release from the water-solutble base (mixed polyethylene glycols) was significantly greater than that from the lipophilic bases (cocoa butter and Witepsol H15). The percentage of isoniazid release form the polyethylene glycol suppository formulation (70 +/- 1.4 mg/mL) was greater than that from the cocoa butter (55 +/- 1.1 mg/mL) and Witepsol H15 Base F (18 +/- 0.36 mg/mL) suppository formulations.

  2. Pavor nocturnus: a complication of single daily tricyclic or neuroleptic dosage.

    Science.gov (United States)

    Flemenbaum, A

    1976-05-01

    The author tested the hypothesis that a single bedtime dosage schedule of tricyclic or neuroleptic medication produces increased frequency of night terrors by administering a questionnaire to 30 medical patients who were not receiving such medications and 100 psychiatric patients on either multiple- or single-dosage schedules. Psychiatric patients on multiple-dosage schedules reported no more frightening dreams than the medical patients, whereas almost three-fourths of those receiving single bedtime doses had frightening dreams, a significant difference from the medical sample. This preliminary report is presented to call attention to the possible undesirable effects of a single dose schedule.

  3. Concanavalin A conjugated biodegradable nanoparticles for oral insulin delivery

    Science.gov (United States)

    Hurkat, Pooja; Jain, Aviral; Jain, Ashish; Shilpi, Satish; Gulbake, Arvind; Jain, Sanjay K.

    2012-11-01

    Major research issues in oral protein delivery include the stabilization of protein in delivery devices which could increase its oral bioavailability. The study deals with development of oral insulin delivery system utilizing biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles and modifying its surface with Concanavalin A to increase lymphatic uptake. Surface-modified PLGA nanoparticles were characterized for conjugation efficiency of ligand, shape and surface morphology, particle size, zeta potential, polydispersity index, entrapment efficiency, and in vitro drug release. Stability of insulin in the developed formulation was confirmed by SDS-PAGE, and integrity of entrapped insulin was assessed using circular dichroism spectrum. Ex vivo study was performed on Wistar rats, which exhibited the higher intestinal uptake of Con A conjugated nanoparticles. In vivo study performed on streptozotocin-induced diabetic rats which indicate that a surface-modified nanoparticle reduces blood glucose level effectively within 4 h of its oral administration. In conclusion, the present work resulted in successful production of Con A NPs bearing insulin with sustained release profile, and better absorption and stability. The Con A NPs showed high insulin uptake, due to its relative high affinity for non-reducing carbohydrate residues i.e., fucose present on M cells and have the potential for oral insulin delivery in effective management of Type 1 diabetes condition.

  4. Concanavalin A conjugated biodegradable nanoparticles for oral insulin delivery

    Energy Technology Data Exchange (ETDEWEB)

    Hurkat, Pooja; Jain, Aviral; Jain, Ashish; Shilpi, Satish; Gulbake, Arvind; Jain, Sanjay K., E-mail: drskjainin@yahoo.com [Dr. Hari Singh Gour Vishwavidyalaya, Pharmaceutics Research Projects Laboratory, Department of Pharmaceutical Sciences (India)

    2012-11-15

    Major research issues in oral protein delivery include the stabilization of protein in delivery devices which could increase its oral bioavailability. The study deals with development of oral insulin delivery system utilizing biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles and modifying its surface with Concanavalin A to increase lymphatic uptake. Surface-modified PLGA nanoparticles were characterized for conjugation efficiency of ligand, shape and surface morphology, particle size, zeta potential, polydispersity index, entrapment efficiency, and in vitro drug release. Stability of insulin in the developed formulation was confirmed by SDS-PAGE, and integrity of entrapped insulin was assessed using circular dichroism spectrum. Ex vivo study was performed on Wistar rats, which exhibited the higher intestinal uptake of Con A conjugated nanoparticles. In vivo study performed on streptozotocin-induced diabetic rats which indicate that a surface-modified nanoparticle reduces blood glucose level effectively within 4 h of its oral administration. In conclusion, the present work resulted in successful production of Con A NPs bearing insulin with sustained release profile, and better absorption and stability. The Con A NPs showed high insulin uptake, due to its relative high affinity for non-reducing carbohydrate residues i.e., fucose present on M cells and have the potential for oral insulin delivery in effective management of Type 1 diabetes condition.

  5. [The effect of biyuanshu oral liquid on the formation of Pseudomonas aeruginosa biofilms in vitro].

    Science.gov (United States)

    Liu, Xiang; Chen, Haihong; Wang, Shengqing

    2012-07-01

    To observe the effect of biyuanshu oral liquid on the formation of pseudomonas aeruginosa biofilms in vitro. Pseudomonas aeruginosa biofilm was established by plate culture and detected by Scanning electron microscopy and AgNO3 staining. After treated with different dosages of biyuanshu oral liquid and erythromycin, the pseudomonas aeruginosa biofilms were observed by AgNO3 staining and the number of viable bacteria were measured by serial dilution. The pseudomonas aeruginosa biofilms could be detected by SEM at the seventh culture day and it was consistent with the detection of AgNO3 staining. The biyuanshu oral liquid and erythromycin have the effect on inhibiting the formation of pseudomonas aeruginosa biofilms. But with the already formed pseudomonas aeruginosa biofilms the inhibition was not significant. The serial dilution method showed that the viable counts of bacteria of biyuanshu oral liquid and erythromycin treated groups were significantly lower than those untreated groups (P formation of pseudomonas aeruginosa biofilms in vitro.

  6. 21 CFR 522.1662 - Oxytetracycline hydrochloride implantation or injectable dosage forms.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline hydrochloride implantation or injectable dosage forms. 522.1662 Section 522.1662 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS § 522.1662 Oxytetracycline hydrochloride implantation or injectable...

  7. Influence of Mycotoxin Binders on the Oral Bioavailability of Doxycycline in Pigs.

    Science.gov (United States)

    De Mil, Thomas; Devreese, Mathias; De Saeger, Sarah; Eeckhout, Mia; De Backer, Patrick; Croubels, Siska

    2016-03-16

    Mycotoxin binders are feed additives that aim to adsorb mycotoxins in the gastrointestinal tract of animals, making them unavailable for systemic absorption. The antimicrobial drug doxycycline (DOX) is often used in pigs and is administered through feed or drinking water; hence, DOX can come in contact with mycotoxin binders in the gastrointestinal tract. This paper describes the effect of four mycotoxin binders on the absorption of orally administered DOX in pigs. Two experiments were conducted: The first used a setup with bolus administration to fasted pigs at two different dosages of mycotoxin binder. In the second experiment, DOX and the binders were mixed in the feed at dosages recommended by the manufacturers (= field conditions). Interactions are possible between some of the mycotoxin binders dosed at 10 g/kg feed but not at 2 g/kg feed. When applying field conditions, no influences were seen on the plasma concentrations of DOX.

  8. Biopharmaceutical evaluation of transnasal, sublingual, and buccal disk dosage forms of butorphanol.

    Science.gov (United States)

    Shyu, W C; Mayol, R F; Pfeffer, M; Pittman, K A; Gammans, R E; Barbhaiya, R H

    1993-07-01

    A series of three-way crossover randomized studies were conducted to evaluate the absolute bioavailability of butorphanol, a potent agonist-antagonist analgesic, from transnasal, sublingual, and buccal disk formulations in order to identify a practical alternative to oral administration. In each study, healthy male volunteers received 2 mg doses of butorphanol tartrate intravenously and either transnasally, sublingually or buccally. Serial blood samples were collected over 12 h and butorphanol plasma concentrations were determined by radioimmunoassay. The plasma concentration data were subjected to non-compartmental pharmacokinetic analysis. The elimination half-life of butorphanol was about 3-5 h and was independent of the route of administration. Absorption of butorphanol following transnasal administration was faster than that observed following sublingual or buccal administration. Mean absolute bioavailabilities of sublingual tablet and buccal disk formulation were only 19 per cent and 29 per cent, respectively, but for transnasal administration the value rose significantly, to 70 per cent. Based on the results of these studies, transnasal dosage form of butorphanol was selected for further clinical trials of treatment of moderate to severe pain.

  9. Stability of pyrimethamine in a liquid dosage formulation stored for three months.

    Science.gov (United States)

    Nahata, M C; Morosco, R S; Hipple, T F

    1997-12-01

    The stability of pyrimethamine in a liquid dosage formulation stored for up to three months was studies. Commercially available 25-mg pyrimethamine tablets were crushed with a mortar and pestle and mixed with a 1:1 mixture of Simple Syrup, NF, and 1% methylcellulose to yield a suspension with a pyrimethamine concentration of 2 mg/mL. The suspension was poured into 10 amber plastic and 10 amber glass prescription bottles; 5 plastic and 5 glass bottles were stored at 4 degrees C, and the remaining bottles were kept at 25 degrees C. Samples were collected at intervals up to 91 days and tested for pyrimethamine concentration by stability-indicating high-performance liquid chromatography. Pyrimethamine remained stable throughout the three-month study period under all conditions. At 4 degrees C, pyrimethamine concentrations remained above 96% of the initial concentration; at 25 degrees C, pyrimethamine concentrations remained above 91%. No substantial changes in pH were observed. Pyrimethamine was stable for at least 91 days in an oral suspension stored in plastic or glass prescription bottles at 4 or 25 degrees C.

  10. Orally-dissolving film for sublingual and buccal delivery of ropinirole.

    Science.gov (United States)

    Lai, Ka Lun; Fang, Yuan; Han, Hao; Li, Qingqing; Zhang, Shuai; Li, Ho Yin; Chow, Shing Fung; Lam, Tai Ning; Lee, Wai Yip Thomas

    2018-03-01

    Ropinirole is a very important treatment option for Parkinson's disease (PD), a major threat to the aging population. However, this drug undergoes extensive first-pass metabolism, resulting in a low oral bioavailability. Moreover, the necessity of frequent administration due to the short half-life of ropinirole may jeopardize patient compliance. Indeed, taking this drug in solid oral dosage forms (e.g. Tablet) can be a challenge because of the tremor, rigidity, limited mobility, and impaired drug absorption experienced by PD patients. In light of these, there is a pressing need to devise formulations for the delivery of ropinirole that allow simple and easy administration and fast drug action, as well as avoidance of first-pass metabolism and overcoming the challenge of impaired absorption due to gastrointestinal dysfunctions, etc. Herein, we seek to overcome all these challenges via sublingual or buccal delivery of orally-dissolving films. Accordingly, we aimed to fabricate and characterize orally-dissolving films of ropinirole and assess their in vivo pharmacokinetics after sublingual and buccal administration. The ropinirole oral film was non-toxic and exhibited fast disintegration and dissolution and was physically stable for at least 28 days. Upon buccal/sublingual administration of the oral films, ropinirole reached the systemic circulation within 15 min and bioavailability was significantly improved, which may be attributable to avoidance of first-pass metabolism via absorption through the oral cavity. In conclusion, our ropinirole oral film improved bioavailability after sublingual or buccal administration. This formulation potentially overcomes biopharmaceutical challenges and provide a convenient means of administration of ropinirole or other anti-PD drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Swelling, erosion and drug release characteristics of salbutamol sulfate from hydroxypropyl methylcellulose-based matrix tablets.

    Science.gov (United States)

    Chaibva, Faith A; Khamanga, Sandile M M; Walker, Roderick B

    2010-12-01

    Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.

  12. Oral delivery of capsaicin using MPEG-PCL nanoparticles.

    Science.gov (United States)

    Peng, Wei; Jiang, Xin-yi; Zhu, Yuan; Omari-Siaw, E; Deng, Wen-wen; Yu, Jiang-nan; Xu, Xi-ming; Zhang, Wei-ming

    2015-01-01

    To prepare a biodegradable polymeric carrier for oral delivery of a water-insoluble drug capsaicin (CAP) and evaluate its quality. CAP-loaded methoxy poly (ethylene glycol)-poly(ε-caprolactone) nanoparticles (CAP/NPs) were prepared using a modified emulsification solvent diffusion technique. The quality of CAP/NPs were evaluated using transmission electron microscopy, powder X-ray diffraction, differential scanning calorimetry and Fourier transform infrared techniques. A dialysis method was used to analyze the in vitro release profile of CAP from the CAP/NPs. Adult male rats were orally administered CAP/NPs (35 mg/kg), and the plasma concentrations of CAP were measured with a validated HPLC method. The morphology of rat gastric mucosa was studied with HE staining. CAP/NPs had an average diameter of 82.54 ± 0.51 nm, high drug-loading capacity of 14.0% ± 0.13% and high stability. CAP/NPs showed a biphasic release profile in vitro: the burst release was less than 25% of the loaded drug within 12 h followed by a more sustained release for 60 h. The pharmacokinetics study showed that the mean maximum plasma concentration was observed 4 h after oral administered of CAP/NPs, and approximately 90 ng/mL of CAP was detected in serum after 36 h. The area under the curve for the CAP/NPs group was approximately 6-fold higher than that for raw CAP suspension. Histological studies showed that CAP/NPs markedly reduced CAP-caused gastric mucosa irritation. CAP/NPs significantly enhance the bioavailability of CAP and markedly reduce gastric mucosa irritation in rats.

  13. The use of thiolated polymers as carrier matrix in oral peptide delivery--proof of concept.

    Science.gov (United States)

    Bernkop-Schnürch, Andreas; Pinter, Yvonne; Guggi, Davide; Kahlbacher, Hermann; Schöffmann, Gudrun; Schuh, Maximilian; Schmerold, Ivo; Del Curto, Maria Dorly; D'Antonio, Mauro; Esposito, Pierandrea; Huck, Christian

    2005-08-18

    It was the aim of this study to develop an oral delivery system for the peptide drug antide. The stability of the therapeutic peptide towards gastrointestinal peptidases was evaluated. The therapeutic agent and the permeation mediator glutathione were embedded in the thiolated polymer chitosan-4-thio-butylamidine conjugate (chitosan-TBA conjugate) and compressed to tablets. Drug release studies were performed in the dissolution test apparatus according to the Pharmacopoeia Europea using the paddle method and demineralized water as release medium. In order to avoid mucoadhesion of these delivery systems already in the oral cavity and oesophagus tablets were coated with a triglyceride. These tablets were orally given to pigs (weight: 50+/-2 kg; Edelschwein Pietrain). Moreover, antide was administered intravenously, subcutaneously and orally in solution. Results showed stability of antide towards pepsin, trypsin and chymotrypsin. In contrast, antide was rapidly degraded by elastase. Consequently a stomach-targeted delivery system was designed. Drug release studies demonstrated an almost zero-order controlled release of antide over 8 h. In vivo studies demonstrated a relative bioavailability of 34.4% for the subcutaneous administration. Oral administration of antide in solution led to no detectable concentrations of the drug in plasma at all. In contrast, administering antide being incorporated in the thiolated polymer resulted in a significant uptake of the peptide. The absolute and relative bioavailability was determined to be 1.1% and 3.2%, respectively.

  14. Biodegradable microcontainers as an oral drug delivery system for poorly soluble drugs

    DEFF Research Database (Denmark)

    Nielsen, Line Hagner; Nagstrup, Johan; Keller, Stephan Sylvest

    2013-01-01

    PURPOSE: To fabricate microcontainers in biodegradable polylactic acid (PLLA) polymer films using hot embossing, and investigate the application of fabricated microcontainers as an oral drug delivery system for a poorly soluble drug. METHODS: For fabrication of the PLLA microcontainers, a film...... (produced by spray drying) using a simplified version of a screen printing technique. An enteric-resistant lid of Eudragit L-100 was subsequently spray coated onto the cavity of the microcontainers. Release of amorphous furosemide salt from the coated microcontainers was investigated using a μ-Diss profiler...... release from microcontainers in gastric medium, and facilitated an immediate release in the intestinal medium. The fabricated microcontainers therefore show considerable future potential as oral drug delivery systems....

  15. PEG modulated release of etanidazole from implantable PLGA/PDLA discs.

    Science.gov (United States)

    Wang, Fangjing; Lee, Timothy; Wang, Chi-Hwa

    2002-09-01

    In this work, etanidazole (one type of hypoxic radiosensitizer) is encapsulated into spray dried poly(D),L-lactide-co-glycolide) (PLGA) microspheres and then compressed into discs for controlled release applications. Etanidazole is characterized by intracellular glutathione depletion and glutathione transferases inhibition, thereby enhancing sensitivity to radiation. It is also cytotoxic to tumor cells and can chemosensitize some alkylating agents by activating their tumor cell killing capabilities. We observed the release characteristics of etanidazole in the dosage forms of microspheres and discs, subjected to different preparation conditions. The release characteristics, morphology changes, particle size, and encapsulation efficiency of microspheres are also investigated. The release rate of etanidazole from implantable discs (13 mm in diameter, 1 mm in thickness, fabricated by a press) is much lower than microspheres due to the reduced specific surface. After the initial burst of 1% release for the first day, the cumulative release within the first week is less than 2% until a secondary burst of release (caused by polymer degradation) occurs after one month. Some key preparation conditions such as drug loadings, disc thickness and diameter, and compression pressure can affect the initial burst of etanidazole from the discs. However, none of them can significantly make the release more uniform. In contrast, the incorporation of polyethylene glycol (PEG) can greatly enhance the release rate of discs and also reduces the secondary burst effect, thereby achieving a sustained release for about 2 months.

  16. Formulation and evaluation of taste mask pellets of granisetron hydrochloride as oro dispersible tablet

    Directory of Open Access Journals (Sweden)

    Nilesh Choudhary

    2015-09-01

    Full Text Available Orally disintegrating systems have carved a niche amongst the oral drug delivery systems due to the highest compliance of the patients, especially the geriatrics and pediatrics. In addition, patients suffering from dysphagia, motion sickness, repeated emesis and mental disorders prefer these medications because they cannot swallow large quantity of water. Further, drugs exhibiting satisfactory absorption from the oral mucosa or intended for immediate pharmacological action can be advantageously formulated in these dosage forms. However, the requirements of formulating these dosage forms with mechanical strength sufficient to withstand the rigors of handling and capable of disintegrating within a few seconds on contact with saliva are inextricable. The purpose of this research was to mask the bitter taste of granisetron hydrochloride. To mask the taste Kollicoat(r Smartseal 30D was used as coating polymer for pellet coating. The coated pellets of the drug was directly compressed with different superdisintegrant as AC-Di-Sol, Explotab and Kollidon CL in different concentration 5.0-7.5% w/w into an ODT. The prepared tablets were evaluated for hardness, friability, weight variation, wetting time, wet absorption ratio, in-vitro disintegration time and in vitro dissolution studies. Tablets exhibited quick disintegration characteristics with Kollidon CL in concentration 7.5% w/w i.e., within 20 seconds, which is characteristic of orally disintegrating dosage forms. More than 98% of drug was released from the formulations within 15 minutes. Formulations subjected to stability testing as per the ICH guidelines for 3 months, indicated stability with no change in taste, hardness, drug content, disintegration time and dissolution profiles. Thus, the results conclusively demonstrated successful masking of taste and rapid disintegration of the formulated dosage forms in the oral cavity.

  17. Optimization of caseinate-coated simvastatin-zein nanoparticles: improved bioavailability and modified release characteristics

    Directory of Open Access Journals (Sweden)

    Ahmed OA

    2015-01-01

    Full Text Available Osama AA Ahmed,1,2 Khaled M Hosny,1,3 Majid M Al-Sawahli,1,4 Usama A Fahmy11Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, King Abdulaziz University, Jeddah, Saudi Arabia; 2Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Minia University, Minia, Egypt; 3Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Beni Suef University, Beni Suef, Egypt; 4Holding Company for Biological Products & Vaccines (VACSERA, Cairo, EgyptAbstract: The current study focuses on utilization of the natural biocompatible polymer zein to formulate simvastatin (SMV nanoparticles coated with caseinate, to improve solubility and hence bioavailability, and in addition, to modify SMV-release characteristics. This formulation can be utilized for oral or possible depot parenteral applications. Fifteen formulations were prepared by liquid–liquid phase separation method, according to the Box–Behnken design, to optimize formulation variables. Sodium caseinate was used as an electrosteric stabilizer. The factors studied were: percentage of SMV in the SMV-zein mixture (X1, ethanol concentration (X2, and caseinate concentration (X3. The selected dependent variables were mean particle size (Y1, SMV encapsulation efficiency (Y2, and cumulative percentage of drug permeated after 1 hour (Y3. The diffusion of SMV from the prepared nanoparticles specified by the design was carried out using an automated Franz diffusion cell apparatus. The optimized SMV-zein formula was investigated for in vivo pharmacokinetic parameters compared with an oral SMV suspension. The optimized nanosized SMV-zein formula showed a 131 nm mean particle size and 89% encapsulation efficiency. In vitro permeation studies displayed delayed permeation characteristics, with about 42% and 85% of SMV cumulative amount released after 12 and 48 hours, respectively. Bioavailability estimation in rats revealed an augmentation in SMV bioavailability

  18. A Prospective Multicentre Study to Evaluate the Efficacy and Tolerability of Osmotic Release Oral System (Oros® Hydromorphone in Opioid-Naive Cancer Patients: Results of the Korean South West Oncology Group Study

    Directory of Open Access Journals (Sweden)

    Eun-Kee Song

    2015-01-01

    Full Text Available BACKGROUND: Osmotic release oral system (OROS® hydromorphone is a potent, long-acting opioid analgesic, effective and safe for controlling cancer pain in patients who have received other strong opioids. To date, few studies have examined the efficacy of hydromorphone for pain relief in opioid-naive cancer patients.

  19. Two Oral Midazolam Preparations in Pediatric Dental Patients: A Prospective Randomised Clinical Trial

    OpenAIRE

    Katayoun Salem; Shaqayegh Kamranzadeh; Maryam Kousha; Shahnaz Shaeghi; Fatemeh AbdollahGorgi

    2015-01-01

    Pharmacological sedation is an alternative behavior management strategy in pediatric dentistry. The aim of this study was to compare the behavioral and physiologic effects of “commercially midazolam syrup” versus “orally administered IV midazolam dosage form (extemporaneous midazolam (EF))” in uncooperative pediatric dental patients. Eighty-eight children between 4 to 7 years of age received 0.2–0.5 mg/kg midazolam in this parallel trial. Physiologic parameters were recorded at baseline and e...

  20. Effect of sustained-release isosorbide dinitrate on post-prandial gastric emptying and gastroduodenal motility in healthy humans

    DEFF Research Database (Denmark)

    Madsen, Jan Lysgård; Rasmussen, S L; Linnet, J

    2004-01-01

    and gastroduodenal motility after a meal. Eleven healthy volunteers participated in a double-blind, placebo-controlled, cross-over study. Each subject ingested 40 mg isosorbide dinitrate orally as a sustained-release formulation or oral placebo, in random order. Gastric emptying and gastroduodenal motility were...... consecutive 15-min periods. A 40 mg single dose of sustained-released isosorbide dinitrate does not seem to alter gastric emptying or gastroduodenal motility after a meal.......Nitric oxide (NO) is an inhibitory neurotransmitter released by non-adrenergic and non-cholinergic neurons that innervate the smooth muscles of the gastrointestinal tract. We examined whether NO, derived from a sustained-release preparation of isosorbide dinitrate, influenced gastric emptying...

  1. Improved Dissolution and Oral Bioavailability of Celecoxib by a Dry Elixir System.

    Science.gov (United States)

    Cho, Kwan Hyung; Jee, Jun-Pil; Yang, Da A; Kim, Sung Tae; Kang, Dongjin; Kim, Dae-Young; Sim, Taeyong; Park, Sang Yeob; Kim, Kyeongsoon; Jang, Dong-Jin

    2018-02-01

    The purpose of this study was to develop and evaluate a dry elixir (DE) system for enhancing the dissolution rate and oral bioavailability of celecoxib. DE system has been used for improving solubility, oral bioavailability of poorly water-soluble drugs. The encapsulated drugs or solubilized drugs in the matrix are rapidly dissolved due to the co-solvent effect, resting in both an enhanced dissolution and bioavailability. DEs containing celecoxib were prepared by spray-drying method and characterized by morphology, drug/ethanol content, drug crystallinity, dissolution rate and oral bioavailability. The ethanol content and drug content in DE system could be easily altered by controlling the spraydrying conditions. The dissolution profile of celecoxib from DE proved to be much higher than that of celecoxib powder due to the nano-structured matrix, amorphous state and encapsulated ethanol. The bioavailability of celecoxib from DEs was compared with celecoxib powder alone and commercial product (Celebrex®) in rats. In particular, blood concentrations of celecoxib form DE formulation were much greater than those of native celecoxib and market product. The data demonstrate that the DE system could provide an useful solid dosage form to enhance the solubility, dissolution rate and oral bioavailability of celecoxib.

  2. Short-time, high-dosage penicillin infusion therapy of syphilis

    DEFF Research Database (Denmark)

    Lomholt, Hans; Poulsen, Asmus; Brandrup, Flemming

    2003-01-01

    The optimal dosage and duration of penicillin treatment for the various stages of syphilis are not known. We present data on 20 patients with syphilis (primary, secondary or latent) treated with high-dose, short-time penicillin infusion therapy. Patients were given 10 MIU of penicillin G intraven......The optimal dosage and duration of penicillin treatment for the various stages of syphilis are not known. We present data on 20 patients with syphilis (primary, secondary or latent) treated with high-dose, short-time penicillin infusion therapy. Patients were given 10 MIU of penicillin G...

  3. A Chemopreventive Nanodiamond Platform for Oral Cancer Treatment.

    Science.gov (United States)

    Yen, Albert; Zhang, Kangyi; Daneshgaran, Giulia; Kim, Ho-Joong; Ho, Dean

    2016-02-01

    Standard oral cancer therapy generally includes a combination of surgery with chemotherapy and/or radiotherapy. This treatment paradigm has not changed in some time. In this paper, we propose a chemopreventive nanodiamond platform for the delivery of celecoxib (Celebrex) to oral cancer lesions. This innovative platform allows for sustained drug release under physiological conditions, potentially enhancing chemopreventive efficacy of celecoxib without the physical and toxicological damage associated with conventional means of drug delivery.

  4. Formulation of Dipyridamole Sustained Release Tablet Using Floating System

    Directory of Open Access Journals (Sweden)

    Lenny Mauilida Valentina

    2011-06-01

    Full Text Available Dipyridamole is a drug for prevention of postoperative thromboembolic complication of heart valve replacement and long term therapy of angina pectoris will be well absorbed in stomach. To maintain therapeutic plasma concentration in long time and to increase bioavalaibility is needed a sustained release dosage form having the long residence time in the stomach. The objective of this research was to make floating sustained release tablet of dipyridamole conforming to the requirement that was set up by dipyridamol therapeutic concentration. Tablets were made by wet granulation method using aquadest as a liquid binder, HPMC K4M, Ac-di-sol, Avicel PH 102, talk, and Mg stearat. Dissolution assay was carried out using type 2 release tester at rotation speed of 50 rpm in medium 900 mL HCl 0.1 N at 37 ± 0.5 °C for 8 hours. The formulation containing of 50 mg dipirydamole, HPMC K4M (30%, Ac-di-sol (20%, Avicel PH 102 (37%, talk (2%, and Mg stearat (1% released 59.61 ± 6.73% and 89.34 ± 5.87% of dipyridamole respectively after 4 and 8 hours that conformed to the requirement.

  5. Genetic basis for dosage sensitivity in Arabidopsis thaliana.

    Directory of Open Access Journals (Sweden)

    Isabelle M Henry

    2007-04-01

    Full Text Available Aneuploidy, the relative excess or deficiency of specific chromosome types, results in gene dosage imbalance. Plants can produce viable and fertile aneuploid individuals, while most animal aneuploids are inviable or developmentally abnormal. The swarms of aneuploid progeny produced by Arabidopsis triploids constitute an excellent model to investigate the mechanisms governing dosage sensitivity and aneuploid syndromes. Indeed, genotype alters the frequency of aneuploid types within these swarms. Recombinant inbred lines that were derived from a triploid hybrid segregated into diploid and tetraploid individuals. In these recombinant inbred lines, a single locus, which we call SENSITIVE TO DOSAGE IMBALANCE (SDI, exhibited segregation distortion in the tetraploid subpopulation only. Recent progress in quantitative genotyping now allows molecular karyotyping and genetic analysis of aneuploid populations. In this study, we investigated the causes of the ploidy-specific distortion at SDI. Allele frequency was distorted in the aneuploid swarms produced by the triploid hybrid. We developed a simple quantitative measure for aneuploidy lethality and using this measure demonstrated that distortion was greatest in the aneuploids facing the strongest viability selection. When triploids were crossed to euploids, the progeny, which lack severe aneuploids, exhibited no distortion at SDI. Genetic characterization of SDI in the aneuploid swarm identified a mechanism governing aneuploid survival, perhaps by buffering the effects of dosage imbalance. As such, SDI could increase the likelihood of retaining genomic rearrangements such as segmental duplications. Additionally, in species where triploids are fertile, aneuploid survival would facilitate gene flow between diploid and tetraploid populations via a triploid bridge and prevent polyploid speciation. Our results demonstrate that positional cloning of loci affecting traits in populations containing ploidy and

  6. Rectal absorption of morphine from controlled release suppositories

    NARCIS (Netherlands)

    Moolenaar, Frits; Meyler, Pim; Frijlink, Erik; Jauw, Tjoe Hang; Visser, Jan; Proost, Johannes

    1995-01-01

    The absorption profiles and bioavailability of morphine in human volunteers (n = 13) were described after oral administration of MS Contin tablets and rectal administration of a newly developed controlled release suppository. By manipulating the viscosity of fatty suppository base an entirely

  7. Administered activity of Tc-99m MDP for bone scintigraphy, standard or individual dosage?

    International Nuclear Information System (INIS)

    Vestergren, E.; Gretarsdottir, J.; Jacobsson, L.

    2002-01-01

    Background and Aim: Adult patients are generally, irrespective of size, given the same amount of activity for a certain type of nuclear medicine examination, a standard dosage. Identical image quality is essential when comparing different patient studies. The aim of this study is to evaluate different dosage methods for Tc-99m-MDP bone scintigraphy and to investigate whether individual dosage will decrease the variations in image quality between different patients. Material and Methods: 100 consecutive adult patients (aged between 40 and 89 years) undergoing whole body bone scintigraphy were studied. Eight patients were excluded from the study because of abnormal high uptake in the areas of interest. The patient weight and height were registered. The activity in the syringes was measured before and after the injection of about 600 MBq Tc-99m MDP. Scanning was performed, with a dual head gamma camera (Maxxus or Millennium VG, General Electric) equipped with a high-resolution collimator, at approximately 4 hours (mean 3.8 h) post-injection. Regions of interest (ROI) were drawn over the lumbar spine (posterior view), the right femur (anterior view) and also soft tissue background regions for each area. The total counts, maximum counts/pixel and number of pixels in the ROIs were registered. The maximum number of counts/pixel (background-subtracted), SPINEmax and FEMURmax were chosen as the image quality parameters. For each patient, SPINEmax and FEMURmax where recalculated to the number that would have been obtained with standard dosage (exactly 600 MBq), and dosage proportional to body weight, body surface area and body height. All values were corrected to a scanning time 3.8 h after injection. Results: Both with a standard activity dosage and a dosage proportional to body height, SPINEmax decreases with increasing body weight. Dosage proportional to body weight gives increasing values of SPINEmax with increasing body weight. Dosage proportional to body surface area

  8. Long-acting injectable paliperidone palmitate versus oral paliperidone extended release: a comparative analysis from two placebo-controlled relapse prevention studies.

    Science.gov (United States)

    Markowitz, Michael; Fu, Dong-Jing; Levitan, Bennett; Gopal, Srihari; Turkoz, Ibrahim; Alphs, Larry

    2013-07-11

    Increasing availability and use of long-acting injectable antipsychotics have generated a need to compare these formulations with their oral equivalents; however, a paucity of relevant data is available. This post hoc comparison of the long-term efficacy, safety and tolerability of maintenance treatment with paliperidone palmitate (PP) versus oral paliperidone extended release (ER) used data from two similarly designed, randomised, double-blind (DB), placebo-controlled schizophrenia relapse prevention trials. Assessments included measures of time to relapse, symptom changes/functioning and treatment-emergent adverse events (TEAEs). Time to relapse between treatment groups was evaluated using a Cox proportional hazards model. Between-group differences for continuous variables for change scores during the DB phase were assessed using analysis of co-variance models. Categorical variables were evaluated using Chi-square and Fisher's exact tests. No adjustment was made for multiplicity. Approximately 45% of enrolled subjects in both trials were stabilised and randomised to the DB relapse prevention phase. Risk of relapse was higher in subjects treated with paliperidone ER than in those treated with PP [paliperidone ER/PP hazard ratio (HR), 2.52; 95% confidence interval (CI), 1.46-4.35; p 70, both approximately 58.5%; p = 1.000] compared with a 10.9% decrease for paliperidone ER (58.5% vs 47.6%, respectively; p = 0.048). The least squares mean change for Positive and Negative Syndrome Scale (PANSS) total score at DB end point in these previously stabilised subjects was 3.5 points in favour of PP (6.0 vs 2.5; p = 0.025). The rates of TEAEs and AEs of interest appeared similar. This analysis supports maintenance of effect with the injectable compared with the oral formulation of paliperidone in patients with schizophrenia. The safety profile of PP was similar to that of paliperidone ER. Future studies are needed to confirm these findings.

  9. pH-Responsive carriers for oral drug delivery: challenges and opportunities of current platforms.

    Science.gov (United States)

    Liu, Lin; Yao, WenDong; Rao, YueFeng; Lu, XiaoYang; Gao, JianQing

    2017-11-01

    Oral administration is a desirable alternative of parenteral administration due to the convenience and increased compliance to patients, especially for chronic diseases that require frequent administration. The oral drug delivery is a dynamic research field despite the numerous challenges limiting their effective delivery, such as enzyme degradation, hydrolysis and low permeability of intestinal epithelium in the gastrointestinal (GI) tract. pH-Responsive carriers offer excellent potential as oral therapeutic systems due to enhancing the stability of drug delivery in stomach and achieving controlled release in intestines. This review provides a wide perspective on current status of pH-responsive oral drug delivery systems prepared mainly with organic polymers or inorganic materials, including the strategies used to overcome GI barriers, the challenges in their development and future prospects, with focus on technology trends to improve the bioavailability of orally delivered drugs, the mechanisms of drug release from pH-responsive oral formulations, and their application for drug delivery, such as protein and peptide therapeutics, vaccination, inflammatory bowel disease (IBD) and bacterial infections.

  10. Dependence of surface smoothing, sputtering and etching phenomena on cluster ion dosage

    CERN Document Server

    Song, J H; Choi, W K

    2002-01-01

    The dependence of surface smoothing and sputtering phenomena of Si (1 0 0) solid surfaces irradiated by CO sub 2 cluster ions on cluster-ion dosage was investigated using an atomic force microscope. The flux and total ion dosage of impinging cluster ions at the acceleration voltage of 50 kV were fixed at 10 sup 9 ions/cm sup 2 s and were scanned from 5x10 sup 1 sup 0 to 5x10 sup 1 sup 3 ions/cm sup 2 , respectively. The density of hillocks induced by cluster ion impact was gradually increased with the dosage up to 5x10 sup 1 sup 1 ions/cm sup 2 , which caused that the irradiated surface became rough from 0.4 to 1.24 nm in root-mean-square roughness (sigma sub r sub m sub s). At the boundary of the ion dosage of 10 sup 1 sup 2 ions/cm sup 2 , the density of the induced hillocks was decreased and sigma sub r sub m sub s was about 1.21 nm, not being deteriorated further. At the dosage of 5x10 sup 1 sup 3 ions/cm sup 2 , the induced hillocks completely disappeared and the surface became very flat as much as sigma...

  11. Using ion-selective electrodes to study the drug release from porous cellulose matrices

    DEFF Research Database (Denmark)

    Vakili, Hossein; Genina, Natalja; Ehlers, Henrik

    2012-01-01

    -polymer solutions were prepared with the model drugs, using different blend ratios of ethylcellulose (EC) and hydroxypropyl cellulose (HPC). Two different solid dosage forms were used. Polymer films were produced by solvent casting method and drug containing porous cellulose samples were prepared by depositing...... the drug-polymer solutions onto filter paper substrates. The quality of the electrodes and the release profile of Pr+ and Ld+ were investigated with \\r\

  12. A step toward development of printable dosage forms for poorly soluble drugs

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Genina, Natalja; Fors, Daniela

    2013-01-01

    The purpose of this study was to formulate printable dosage forms for a poorly soluble drug (piroxicam; PRX) and to gain understanding of critical parameters to be considered during development of such dosage forms. Liquid formulations of PRX were printed on edible paper using piezoelectric inkjet...

  13. Maths anxiety and medication dosage calculation errors: A scoping review.

    Science.gov (United States)

    Williams, Brett; Davis, Samantha

    2016-09-01

    A student's accuracy on drug calculation tests may be influenced by maths anxiety, which can impede one's ability to understand and complete mathematic problems. It is important for healthcare students to overcome this barrier when calculating drug dosages in order to avoid administering the incorrect dose to a patient when in the clinical setting. The aim of this study was to examine the effects of maths anxiety on healthcare students' ability to accurately calculate drug dosages by performing a scoping review of the existing literature. This review utilised a six-stage methodology using the following databases; CINAHL, Embase, Medline, Scopus, PsycINFO, Google Scholar, Trip database (http://www.tripdatabase.com/) and Grey Literature report (http://www.greylit.org/). After an initial title/abstract review of relevant papers, and then full text review of the remaining papers, six articles were selected for inclusion in this study. Of the six articles included, there were three experimental studies, two quantitative studies and one mixed method study. All studies addressed nursing students and the presence of maths anxiety. No relevant studies from other disciplines were identified in the existing literature. Three studies took place in the U.S, the remainder in Canada, Australia and United Kingdom. Upon analysis of these studies, four factors including maths anxiety were identified as having an influence on a student's drug dosage calculation abilities. Ultimately, the results from this review suggest more research is required in nursing and other relevant healthcare disciplines regarding the effects of maths anxiety on drug dosage calculations. This additional knowledge will be important to further inform development of strategies to decrease the potentially serious effects of errors in drug dosage calculation to patient safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Preparation and characterization of gellan gum/glucosamine/clioquinol film as oral cancer treatment patch.

    Science.gov (United States)

    Tsai, Wanchi; Tsai, Huifang; Wong, Yinuan; Hong, Juiyen; Chang, Shwujen; Lee, Mingwei

    2018-01-01

    To administer cancer drugs with improved convenience to patients and to enhance the bioavailability of cancer drugs for oral cancer therapy, this study prepared gellan gum/glucosamine/clioquinol (GG/GS/CQ) film as the oral cancer treatment patch. GG/GS/CQ film fabricated through the EDC-mediated coupling reactions (GG/GS/CQ/EDC film). The film of the physicochemical properties and drug release kinetics were studied. The effectiveness of GG/GS/CQ/EDC film as oral cancer treatment patch were evaluated with the animal model. The results confirmed that CQ can be incorporated via EDC-mediated covalent conjugation to gellan gum/glucosamine. Mechanical testing revealed that the maximum tensile strength and elongation percentage at break were 1.91kgf/mm 2 and 5.01% for GG/GS/CQ/EDC film. After a drug release experiment lasting 45days, 86.8% of CQ was released from GG/GS/CQ/EDC film. The Huguchi model fit the GG/GS/CQ/EDC drug release data with high correlation coefficients (R 2 =0.9994, respectively). The effect of the CQ dose on oral cancer cells (OC-2) was tested, and the IC 50 of CQ alone and CQ with 10μM CuCl 2 were 9.59 and 2.22μM, respectively. The animal testing indicated that GG/GS/CQ/EDC film was decreased epidermal growth factor receptor (EGFR) expression and suppress tumor progression. These findings provide insights into a possible use for GG/GS/CQ/EDC film for oral ca in clinical practice. The GG/GS/CQ/EDC film is suitable as the dressing for use in the treatment of early-stage cancer or as wound care after surgery in late-stage of oral cancer treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. TREATMENT OF DIABETES MELLITUS IN A GOLDEN LION TAMARIN (LEONTOPITHECUS ROSALIA) WITH THE GLUCAGON-LIKE PEPTIDE-1 MIMETIC EXENATIDE.

    Science.gov (United States)

    Johnson, James G; Langan, Jennifer N; Gilor, Chen

    2016-09-01

    An 8-yr-old male golden lion tamarin ( Leontopithecus rosalia ) was diagnosed with diabetes mellitus based on hyperglycemia and persistent glycosuria. Initial treatment consisted of the oral antihyperglycemic medications glipizide and metformin that resulted in decreased blood glucose concentrations; however, marked glycosuria persisted. Insufficient improvement on oral antihyperglycemic therapy and poor feasibility of daily subcutaneous insulin therapy led to an investigation into an alternative therapy with extended-release exenatide, a glucagon-like peptide-1 (GLP-1) mimetic, at a dosage of 0.13 mg/kg subcutaneously once per month. Following treatment with exenatide, the persistent glycosuria resolved, the animal maintained normal blood glucose concentrations, and had lower serum fructosamine concentrations compared to pretreatment levels. Based on these findings, extended-release exenatide could be considered as a therapeutic option in nonhuman primates with diabetes mellitus that do not respond to oral antihyperglycemics and in which daily subcutaneous insulin is not feasible.

  16. A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets.

    Science.gov (United States)

    Okwuosa, Tochukwu C; Stefaniak, Dominika; Arafat, Basel; Isreb, Abdullah; Wan, Ka-Wai; Alhnan, Mohamed A

    2016-11-01

    The fabrication of ready-to-use immediate release tablets via 3D printing provides a powerful tool to on-demand individualization of dosage form. This work aims to adapt a widely used pharmaceutical grade polymer, polyvinylpyrrolidone (PVP), for instant on-demand production of immediate release tablets via FDM 3D printing. Dipyridamole or theophylline loaded filaments were produced via processing a physical mixture of API (10%) and PVP in the presence of plasticizer through hot-melt extrusion (HME). Computer software was utilized to design a caplet-shaped tablet. The surface morphology of the printed tablet was assessed using scanning electron microscopy (SEM). The physical form of the drugs and its integrity following an FDM 3D printing were assessed using x-ray powder diffractometry (XRPD), thermal analysis and HPLC. In vitro drug release studies for all 3D printed tablets were conducted in a USP II dissolution apparatus. Bridging 3D printing process with HME in the presence of a thermostable filler, talc, enabled the fabrication of immediate release tablets at temperatures as low as 110°C. The integrity of two model drugs was maintained following HME and FDM 3D printing. XRPD indicated that a portion of the loaded theophylline remained crystalline in the tablet. The fabricated tablets demonstrated excellent mechanical properties, acceptable in-batch variability and an immediate in vitro release pattern. Combining the advantages of PVP as an impeding polymer with FDM 3D printing at low temperatures, this approach holds a potential in expanding the spectrum of drugs that could be used in FDM 3D printing for on demand manufacturing of individualised dosage forms.

  17. Oral fluoride reservoirs and the prevention of dental caries.

    Science.gov (United States)

    Vogel, Gerald Lee

    2011-01-01

    Current models for increasing the anti-caries effects of fluoride (F) agents emphasize the importance of maintaining a cariostatic concentration of F in oral fluids. The concentration of F in oral fluids is maintained by the release of this ion from bioavailable reservoirs on the teeth, oral mucosa and - most importantly, because of its association with the caries process - dental plaque. Oral F reservoirs appear to be of two types: (1) mineral reservoirs, in particular calcium fluoride or phosphate-contaminated 'calcium-fluoride-like' deposits; (2) biological reservoirs, in particular (with regard to dental plaque) F held to bacteria or bacterial fragments via calcium-fluoride bonds. The fact that all these reservoirs are mediated by calcium implies that their formation is limited by the low concentration of calcium in oral fluids. By using novel procedures which overcome this limitation, the formation of these F reservoirs after topical F application can be greatly increased. Although these increases are associated with substantive increases in salivary and plaque fluid F, and hence a potential increase in cariostatic effect, it is unclear if such changes are related to the increases in the amount of these reservoirs, or changes in the types of F deposits formed. New techniques have been developed for identifying and quantifying these deposits which should prove useful in developing agents that enhance formation of oral F reservoirs with optimum F release characteristics. Such research offers the prospect of decreasing the F content of topical agents while simultaneously increasing their cariostatic effect. Copyright © 2011 S. Karger AG, Basel.

  18. Preparation and Application of Sustained-Release Potassium Ferrate(VI

    Directory of Open Access Journals (Sweden)

    Xuan Xu

    2014-01-01

    Full Text Available In this study, a composite system for the sustained release of potassium ferrate(VI (sustained-release K2FeO4 was prepared and applied for water treatment. The objective of this research was to maximize the effectiveness of K2FeO4 for water treatment by enhancing its stability using diatomite. The sustained-release K2FeO4 was characterized using X-ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy. The results indicated that no new crystal phase was formed during the preparation and some K2FeO4 crystals entered the pores of the diatomite. From K2FeO4 release experiments, we found that the decomposition rate of K2FeO4 was obviously decreased, which greatly improved the contact rate between released K2FeO4 and pollutants. Via degradation of methyl orange, which was used as a model pollutant, the influential factor of K2FeO4 content within the complete sustained-release K2FeO4 system was studied. The optimal K2FeO4 content within the sustained-release K2FeO4 system was approximately 70%. In natural water samples, sustained-release K2FeO4 at a dosage of 0.06 g/L and with a reaction time of 20 minutes removed 36.84% of soluble microbial products and 17.03% of simple aromatic proteins, and these removal rates were better than those observed after traditional chlorine disinfection.

  19. Diclofenac transdermal patch versus the sustained release tablet: A ...

    African Journals Online (AJOL)

    polyvinyl pyrrolidone K30, with turpentine oil and sesame oil as penetration enhancers. ... therapeutic advantages over conventional oral tablets in terms of prolonged release and improvement of ..... is simple to adopt and cost-effective. In this ...

  20. Nefopam hydrochloride loaded microspheres for post-operative pain management: synthesis, physicochemical characterization and in-vivo evaluation.

    Science.gov (United States)

    Sharma, Neelam; Arora, Sandeep; Madan, Jitender

    2018-02-01

    Once-daily oral dosage of nefopam hydrochloride loaded sustained release microspheres (NPH-MS) was investigated as novel therapeutic strategy for post-operative pain management. Microspheres were synthesized using poly-3-hydroxybutyrate and poly-(ɛ-caprolactone) by double emulsion solvent evaporation technique. NPH-MS were characterized through FTIR, PXRD and SEM. In-vitro drug release study revealed sustained behavior till 24 h. Haemolysis was pain model, reversal of mechanical allodynia and thermal hyperalgesia by NPH-MS was statistically significant (p < .001) as compared with NPH till 24 h post-dose.

  1. Antioxidant status in oral subchronic toxicity of fipronil and fluoride co-exposure in buffalo calves.

    Science.gov (United States)

    Gill, Kamalpreet Kaur; Dumka, Vinod Kumar

    2016-02-01

    The effects of fipronil and fluoride co-exposure were investigated on antioxidant status of buffalo calves. A total of 24 healthy male buffalo calves divided into 4 groups were treated for 98 consecutive days. Group I, receiving no treatment, served as the control. Animals of groups II and III were orally administered with fipronil at the dosage of 0.5 mg/kg/day and sodium fluoride (NaF) at the dosage of 6.67 mg/kg/day, respectively, for 98 days. Group IV was coadministered with fipronil and NaF at the same dosages as groups II and III. Administration of fipronil alone produced significant elevation in lipid peroxidation (LPO) and decrease in the levels of nonenzymatic antioxidant glutathione (GSH). However, it did not produce any significant effect on the activities of enzymatic antioxidants including glutathione peroxidase (GPx), catalase (CAT), and superoxide dismutase (SOD). NaF exposure led to enhanced oxidative stress as shown by significant increase in the LPO and SOD activities while GPx and CAT activities and GSH levels were significantly decreased. Co-exposure to fipronil and NaF showed additive effects on LPO, GPx activity, and GSH levels. © The Author(s) 2013.

  2. Conscious Sedation Efficacy of 0.3 and 0.5 mg/kg Oral Midazolam for Three to Six Year-Old Uncooperative Children Undergoing Dental Treatment: A Clinical Trial

    Directory of Open Access Journals (Sweden)

    Masoud Fallahinejad Ghajari

    2016-10-01

    Full Text Available Objectives: Midazolam with variable dosages has been used to induce sedation in pediatric dentistry. The aim of this study was to compare the efficacy of two dosages of oral midazolam for conscious sedation of children undergoing dental treatment.Materials and Methods: In this randomized crossover double blind clinical trial, 20 healthy children (ASA I aged three to six years with negative or definitely negative Frankl behavioral rating scale were evaluated. Half of the children received 0.5mg/kg oral midazolam plus 1mg/kg hydroxyzine (A orally in the first session and 0.3mg/kg oral midazolam plus 1mg/kg hydroxyzine (B in the next session. The other half received the drugs on a reverse order. Sedation degree by Houpt sedation rating scale, heart rate and level of SpO2 were assessed at the beginning and after 15 and 30 minutes. The data were analyzed using SPSS 19 and Wilcoxon Signed Rank and McNemar’s tests.Results: The results showed that although administration of 0.5mg/kg oral midazolam was slightly superior to 0.3mg/kg oral midazolam in terms of sedation efficacy, the differences were not significant (P>0.05. The difference in treatment success was not significant either (P>0.05. Heart rate, oxygen saturation (SpO2 and respiratory rate were within the normal range and did not show a significant change (P>0.05.Conclusions: The overall success rate of the two drug combinations namely 0.5mg/kg oral midazolam plus hydroxyzine and 0.3mg/kg oral midazolam plus hydroxyzine was not significantly different for management of pediatric patients.Keywords: Conscious Sedation; Pediatric Dentistry; Midazolam; Hydroxyzine

  3. Efficacy, tolerability, and pharmacokinetics of oxcarbazepine oral loading in patients with epilepsy.

    Science.gov (United States)

    Kim, Dong Wook; Gu, Nami; Jang, In-Jin; Chu, Kon; Yu, Kyung-Sang; Cho, Joo-Youn; Yoon, Seo Hyun; Kim, Hwa Suk; Oh, Jeeyoung; Lee, Sang Kun

    2012-01-01

    The rapid achievement of effective levels of antiepileptic drugs (AEDs) is required in patients with epilepsy who have a higher risk of seizures, and oral loading of AEDs may be an important consideration in these patients. We performed the present study to investigate the efficacy and tolerability of oral loading of oxcarbazepine in patients with recurrent seizures, or after temporary discontinuation of AEDs for diagnostic or presurgical evaluation of epilepsy. Forty adult patients were studied and oxcarbazepine was administered orally at a single loading dosage of 30 mg/kg. The plasma levels of oxcarbazepine and its active metabolite, 10,11-dihydro-10-hydroxy-carbazepine (monohydroxy derivative, MHD), were measured, and clinical assessment of adverse events was performed at 2, 4, 6, 8, 10, 12, 16, and 24 h after oral loading of oxcarbazepine. Approximately two-thirds of patients reached effective levels of MHD 2 h after receiving the oral loading, and all patients reached effective levels 4 h after oxcarbazepine administration. Most patients maintained therapeutic MHD levels for at least 16 h. Almost half of the patients experienced adverse events, but all were mild to moderate in severity and resolved spontaneously within 24 h. Our study shows that oral loading of oxcarbazepine is an effective and well-tolerated method for rapidly achieving therapeutic levels of MHD in patients with epilepsy, and is a useful option in selected patients with recurrent seizures, or after temporary discontinuation of AEDs. Wiley Periodicals, Inc. © 2011 International League Against Epilepsy.

  4. Low-dosage helical CT applications for chest medical checkup and lung cancer screening

    International Nuclear Information System (INIS)

    Wang Ping; Cui Fa; Liang Huanqing; Zheng Minfei

    2005-01-01

    Objective: A discussion on low-dosage helical CT applications on chest medical checkup and lung cancer screening. Methods: On the 100 chest medical check up with three different of protocols, including standard-dosage (the tube current was 230 mAs) were compared with low-dose (tube current was 50 mAs or 30 mAs). Results: Low-dosage helical CT scan provides excellent images. In 100 chest medical checkup, 39 nodules or masses were revealed, enlarged lymph node was noted in 1 case; emphysema or bullae was demonstrated in 3 segments; thickening of bronchial wall was shown in 2 cases; and localized pleural thickening was found in 1 case. Conclusion: In chest checkup or lung cancer screening low-dosage helical CT (tube current 30 mAs) will not only guarantee image quality but also reduce the radiation dose during the examination. (authors)

  5. A Single-Dose, Single-Period Pharmacokinetic Assessment of an Extended-Release Orally Disintegrating Tablet of Methylphenidate in Children and Adolescents with Attention-Deficit/Hyperactivity Disorder.

    Science.gov (United States)

    Childress, Ann; Newcorn, Jeffrey; Stark, Jeffrey G; McMahen, Russ; Tengler, Mark; Sikes, Carolyn

    2016-08-01

    To determine the pharmacokinetic (PK) profile of a proprietary formulation of methylphenidate (MPH) in children and adolescents with attention-deficit/hyperactivity disorder (ADHD) in a phase 1 study. Methylphenidate extended-release orally disintegrating tablets (MPH XR-ODTs) combine two technologies in a single-tablet formulation-an extended-release profile that was designed for once-daily dosing in an ODT that does not require water or chewing for ingestion. This was a single-dose, open-label, single-period, single-treatment study, in which 32 children with ADHD who were receiving MPH in doses of 40 or 60 mg before beginning the study each received a 60-mg dose (2 × 30 mg) of MPH XR-ODT. The following plasma PK parameters of MPH were determined for participants grouped by age (6-7, 8-9, 10-12, and 13-17 years old): maximum concentration (Cmax), time to maximum concentration (Tmax), elimination half-life (T½), area under the curve from 0 hours to infinity (AUCinf), oral clearance (CL/F), and volume of distribution in the terminal phase (Vz/F). Safety and tolerability were also assessed. A total of 32 participants received the study drug. For all participants, plasma concentration-time profiles of MPH exhibited a broad peak after administration of MPH XR-ODT through ∼8 hours, indicating extended release from the formulation, followed by an apparent first-order elimination phase. As age increased, MPH exposure decreased and mean estimates of CL/F increased; however, weight-normalized CL/F values were comparable across age groups. Similarly, mean estimates of Vz/F increased with age, but weight-normalization decreased differences across age groups, with the exception of the youngest age group, which had higher values. All adverse events (AEs) were mild. This XR-ODT formulation of MPH demonstrated weight-normalized clearance rates that were consistent across all age groups, a PK profile consistent with once-daily dosing, and an AE profile consistent with

  6. Novel piroxicam-loaded nanospheres generated by the electrospraying technique: physicochemical characterisation and oral bioavailability evaluation.

    Science.gov (United States)

    Mustapha, Omer; Din, Fakhar Ud; Kim, Dong Wuk; Park, Jong Hyuck; Woo, Kyu Bong; Lim, Soo-Jeong; Youn, Yu Seok; Cho, Kwan Hyung; Rashid, Rehmana; Yousaf, Abid Mehmood; Kim, Jong Oh; Yong, Chul Soon; Choi, Han-Gon

    2016-06-01

    To determine if a novel electrospraying technique could be applied to an oral drug delivery system for improving the solubility and oral bioavailability of poorly water-soluble piroxicam; the nanospheres were generated with drug and polyvinylpyrrolidone (PVP) using electrospraying technique; and their physicochemical properties, solubility, release and pharmacokinetics were evaluated in comparison with piroxicam powder. All nanospheres had significantly increased drug solubility and dissolution rates in comparison with the drug powder. In particular, the nanosphere composed of piroxicam and PVP at a weight ratio of 2:8 gave about 600-fold higher solubility, 15-fold higher release rate and 3-fold higher AUC in comparison to piroxicam powder, leading to significantly enhanced oral bioavailability in rats, due to the mingled effect of nanonisation along with transformation to the amorphous state. Thus, this electrospraying technique can be utilised to produce a novel oral nanosphere delivery system with enhanced solubility and oral bioavailability for poorly water-soluble piroxicam.

  7. Efficacy of oral moxidectin against susceptible and resistant isolates of Dirofilaria immitis in dogs.

    Science.gov (United States)

    McTier, Tom L; Six, Robert H; Pullins, Aleah; Chapin, Sara; McCall, John W; Rugg, Douglas; Maeder, Steven J; Woods, Debra J

    2017-11-09

    Monthly topical and sustained-release injectable formulations of moxidectin are currently marketed; however, an oral formulation, while approved at a dose of 3 μg/kg, is not currently marketed in the United States. Although resistance of heartworms to all macrocyclic lactone (ML) heartworm preventives (ivermectin, milbemycin, selamectin and moxidectin) has been demonstrated, to date no data have been reported on the effectiveness of oral moxidectin against recent isolates of Dirofilaria immitis. A total of nine studies were conducted to determine the efficacy of moxidectin against a range of older and recently sourced heartworm isolates. Dogs (groups of three to eight) were inoculated with 50 D. immitis infective larvae (L3) from nine different isolates (MP3, Michigan, JYD-34, ZoeMO-2012, ZoeKy-2013, ZoeLA-2013, GCFL-2014, AMAL-2014 and ZoeAL-2015) and treated 28-30 days later with single oral doses of 3 μg/kg of moxidectin. Additionally, one group of dogs that was inoculated with JYD-34 was treated monthly for 3 consecutive months beginning 30 days post inoculation. Dogs were held for approximately 4 months after the initial (or only) treatment and then necropsied for recovery of adult heartworms. A single dose of 3 μg/kg of moxidectin was 100% effective in preventing the development of five of nine heartworm isolates (MP3, Michigan, ZoeKy, GCFL and ZoeAL isolates), confirming their susceptibility to oral moxidectin at this dose. MP3 and Michigan are isolates sourced from the field more than 9 years ago, while ZoeKy, ZoeAL and GCFL were isolated from the field within the past 2 to 3 years. Against JYD-34, ZoeMO, ZoeLA and AMAL isolates, a single dose of 3 μg/kg of moxidectin was not completely effective, with efficacies of 19%, 82%, 54% and 62%, respectively, demonstrating resistance of these heartworm isolates to oral moxidectin at this dosage. Three consecutive monthly doses of 3 μg/kg of moxidectin were also incompletely effective against the JYD

  8. Efficacy of oral moxidectin against susceptible and resistant isolates of Dirofilaria immitis in dogs

    Directory of Open Access Journals (Sweden)

    Tom L. McTier

    2017-11-01

    Full Text Available Abstract Background Monthly topical and sustained-release injectable formulations of moxidectin are currently marketed; however, an oral formulation, while approved at a dose of 3 μg/kg, is not currently marketed in the United States. Although resistance of heartworms to all macrocyclic lactone (ML heartworm preventives (ivermectin, milbemycin, selamectin and moxidectin has been demonstrated, to date no data have been reported on the effectiveness of oral moxidectin against recent isolates of Dirofilaria immitis. Methods A total of nine studies were conducted to determine the efficacy of moxidectin against a range of older and recently sourced heartworm isolates. Dogs (groups of three to eight were inoculated with 50 D. immitis infective larvae (L3 from nine different isolates (MP3, Michigan, JYD-34, ZoeMO-2012, ZoeKy-2013, ZoeLA-2013, GCFL-2014, AMAL-2014 and ZoeAL-2015 and treated 28–30 days later with single oral doses of 3 μg/kg of moxidectin. Additionally, one group of dogs that was inoculated with JYD-34 was treated monthly for 3 consecutive months beginning 30 days post inoculation. Dogs were held for approximately 4 months after the initial (or only treatment and then necropsied for recovery of adult heartworms. Results A single dose of 3 μg/kg of moxidectin was 100% effective in preventing the development of five of nine heartworm isolates (MP3, Michigan, ZoeKy, GCFL and ZoeAL isolates, confirming their susceptibility to oral moxidectin at this dose. MP3 and Michigan are isolates sourced from the field more than 9 years ago, while ZoeKy, ZoeAL and GCFL were isolated from the field within the past 2 to 3 years. Against JYD-34, ZoeMO, ZoeLA and AMAL isolates, a single dose of 3 μg/kg of moxidectin was not completely effective, with efficacies of 19%, 82%, 54% and 62%, respectively, demonstrating resistance of these heartworm isolates to oral moxidectin at this dosage. Three consecutive monthly doses of 3 μg/kg of

  9. Sustained Release Oral Nanoformulated Green Tea for Prostate Cancer Prevention

    Science.gov (United States)

    2013-05-01

    epigallocatechin-3-gallate. Cancer Res. 2009;69:1712-6. 2. Adhami VM, Siddiqui IA, Syed DN, Lall RK, Mukhtar H. Oral infusion of pomegranate fruit ...and fungi , and is also known for its non-toxic, non-immunogenic properties (23). It has already been used as a pharmaceutical excipient, a weight loss...component EGCG and perceived toxicity associated with its long-term use affect its clinical outcome (36,37). This study suggests a different

  10. Oral administration of antimicrobials increase antimicrobial resistance in E. coli from chicken--a systematic review.

    Science.gov (United States)

    Simoneit, C; Burow, E; Tenhagen, B-A; Käsbohrer, A

    2015-01-01

    Antimicrobials play an important role in animal and human health care. It was the aim of this systematic review to assess the effects of oral administration of antimicrobials on the development of antimicrobial resistance (AMR) in Escherichia coli (E. coli) from chickens. Moreover, the effects of the administration of more than one antimicrobial and of different dosages were studied. Literature was searched in November 2012 from the electronic databases ISI Web of Science, PubMed, Scopus and a national literature database (DIMDI) as well as the database ProQuest LLC. The search was updated in March 2014. Original studies describing a treatment (A) and a control group of either non-treatment (C) or initial value (0) and determining AMR in E. coli at different sample points (SP) were included. The literature search resulted in 35 full text articles on the topic, seven (20%) of which contained sufficient information on the administered antimicrobial and the impact of treatment on AMR. Most papers described the use of more than one antimicrobial, several dosages, controls (non-treatment or pre-treatment) and measured AMR at different SPs leading to a total of 227 SPs on the impact of the use of antimicrobials on AMR in chickens. 74% of the SPs (168/227) described a higher AMR-rate in E. coli from treated animals than from controls. After the administration of a single antimicrobial, AMR increased at 72% of the SPs. Administration of more than one antimicrobial increased AMR at 82% of the SPs. Higher dosages were associated with similar or higher AMR rates. The limited number of studies for each antimicrobial agent and the high variability in the resistance effect call for more well designed studies on the impact of oral administration on AMR development and spread. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Stimuli sensitive polymethacrylic acid microparticles (PMAA)--oral insulin delivery.

    Science.gov (United States)

    Victor, Sunita Prem; Sharma, Chandra P

    2002-10-01

    This study investigated polymethacrylic acid (PMAA) microparticles for controlled release of Insulin in oral administration. The microparticles were characterised by scanning electron microscopy (SEM) for morphological studies. The swelling behaviour and drug release profile in various pH media were studied. The % swelling of gels was found to be inversely related to the amount of crosslinker added. Inclusion complex of betaCD and Insulin was studied using polyacrylamide gel electrophoresis (PAGE). Optimum complexation was obtained in the ratio 100 mg betaCD: 200 IU Insulin. The release pattern of Insulin from Insulin-betaCD complex encapsulated PMAA microparticles showed release of Insulin for more than seven hours.

  12. Spectrophotometric Determination of Trimipramine in Tablet Dosage ...

    African Journals Online (AJOL)

    Purpose: To develop and validate simple, rapid and sensitive spectrophotometric procedures for determination of trimipramine in tablet dosage form. Methods: The methods were based on the interaction of trimipramine as n-electron donor with the ο-acceptor, iodine and various π-acceptors, namely: chloranil (CH), ...

  13. Design and evaluation of nicorandil extended-release tablet

    Directory of Open Access Journals (Sweden)

    Ju-Young Kim

    2015-04-01

    Full Text Available The aim of this study was to design and evaluate extended-release formulations of a model drug, nicorandil, in order to achieve the desired steady-state plasma concentration of drug in vivo. Simulation was employed to estimate optimum dissolution and absorption rate of nicorandil. The dissolution test was employed using pH 1.2, 4.0, 6.8 buffer solution, or water, to measure the in vitro release behaviors of nicorandil formulations. A single dose (15 mg of each formulation was orally administered to four beagle dogs under fasted conditions, and the pharmacokinetic parameters were calculated. The in vitro/in vivo relationship of the extended-release formulation was confirmed using in vitro dissolution profiles and plasma concentrations of drug in beagle dogs. Nicorandil was released completely within 30 min from the immediate-release tablets and released for 24 h from the extended-release tablets. The nicorandil plasma concentration could be modified by adjusting the drug release rate from the extended-release formulation. The release rate of nicorandil was the rate-limiting step in the overall absorption of drug from the extended-release formulations. These results highlight the potential of a nicorandil extended-release formulation in the treatment of angina pectoris.

  14. Release study of diclofenac from new carbomer gels.

    Science.gov (United States)

    Bregni, Carlos; Chiappetta, Diego; Faiden, Natalia; Carlucci, Adriana; García, Roberto; Pasquali, Ricardoc

    2008-01-01

    Carbopol gels were prepared using a traditional polymer with mucoadhesive properties (974P). A new Carbomer derivative Ultrez 21 was also evaluated. Mineral oil, as occlusive ingredient, glycerol as humectant and ethanol were included in all the compositions. The feasibility of preparing these formulations with or without a bioadhesive polymer (Polycarbophil AA-1) and a second oil phase with enhancer activity (Miglyol 840) was evaluated. Further characterization including physical stability during a year was carried out. In vitro release behaviour of diclofenac sodium in Franz diffusion cell was evaluated with some selected formulations using an ethanol-water (50% w/w) solution as receptor medium. Addition of Polycarbophil AA-1 increased formulation viscosity and decreased drug release. These types of topical dosage forms could give sustained delivery of drug onto the skin, could tolerate the incorporation of an enhancer, a humectant and an occlusive phase, so they are interesting promises to improve skin absorption of nonsteroidal anti-inflammatory drugs and to prevent side effects associated.

  15. Histamine release inhibitory activity of Piper nigrum leaf.

    Science.gov (United States)

    Hirata, Noriko; Naruto, Shunsuke; Inaba, Kazunori; Itoh, Kimihisa; Tokunaga, Masashi; Iinuma, Munekazu; Matsuda, Hideaki

    2008-10-01

    Oral administration of a methanolic extract of Piper nigrum leaf (PN-ext, 50, 200 and 500 mg/kg) showed a potent dose-dependent inhibition of dinitrofluorobenzene (DNFB)-induced cutaneous reaction at 1 h [immediate phase response (IPR)] after and 24 h [late phase response (LPR)] after DNFB challenge in mice which were passively sensitized with anti-dinitrophenyl (DNP) IgE antibody. Ear swelling inhibitory effect of PN-ext (50, 200 and 500 mg/kg, per os (p.o.)) on very late phase response (vLPR) in the model mice was significant but weaker than that on IPR. Oral administration of PN-ext (50, 200 and 500 mg/kg for 7 d) inhibited picryl chloride (PC)-induced ear swelling in PC sensitized mice. PN-ext exhibited in vitro inhibitory effect on compound 48/80-induced histamine release from rat peritoneal mast cells. Two lignans of PN-ext, (-)-cubebin (1) and (-)-3,4-dimethoxy-3,4-desmethylenedioxycubebin (2), were identified as major active principles having histamine release inhibitory activity.

  16. X chromosome dosage compensation via enhanced transcriptional elongation in Drosophila.

    Science.gov (United States)

    Larschan, Erica; Bishop, Eric P; Kharchenko, Peter V; Core, Leighton J; Lis, John T; Park, Peter J; Kuroda, Mitzi I

    2011-03-03

    The evolution of sex chromosomes has resulted in numerous species in which females inherit two X chromosomes but males have a single X, thus requiring dosage compensation. MSL (Male-specific lethal) complex increases transcription on the single X chromosome of Drosophila males to equalize expression of X-linked genes between the sexes. The biochemical mechanisms used for dosage compensation must function over a wide dynamic range of transcription levels and differential expression patterns. It has been proposed that the MSL complex regulates transcriptional elongation to control dosage compensation, a model subsequently supported by mapping of the MSL complex and MSL-dependent histone 4 lysine 16 acetylation to the bodies of X-linked genes in males, with a bias towards 3' ends. However, experimental analysis of MSL function at the mechanistic level has been challenging owing to the small magnitude of the chromosome-wide effect and the lack of an in vitro system for biochemical analysis. Here we use global run-on sequencing (GRO-seq) to examine the specific effect of the MSL complex on RNA Polymerase II (RNAP II) on a genome-wide level. Results indicate that the MSL complex enhances transcription by facilitating the progression of RNAP II across the bodies of active X-linked genes. Improving transcriptional output downstream of typical gene-specific controls may explain how dosage compensation can be imposed on the diverse set of genes along an entire chromosome.

  17. Determination of dasatinib in the tablet dosage form by ultra high performance liquid chromatography, capillary zone electrophoresis, and sequential injection analysis.

    Science.gov (United States)

    Gonzalez, Aroa Garcia; Taraba, Lukáš; Hraníček, Jakub; Kozlík, Petr; Coufal, Pavel

    2017-01-01

    Dasatinib is a novel oral prescription drug proposed for treating adult patients with chronic myeloid leukemia. Three analytical methods, namely ultra high performance liquid chromatography, capillary zone electrophoresis, and sequential injection analysis, were developed, validated, and compared for determination of the drug in the tablet dosage form. The total analysis time of optimized ultra high performance liquid chromatography and capillary zone electrophoresis methods was 2.0 and 2.2 min, respectively. Direct ultraviolet detection with detection wavelength of 322 nm was employed in both cases. The optimized sequential injection analysis method was based on spectrophotometric detection of dasatinib after a simple colorimetric reaction with folin ciocalteau reagent forming a blue-colored complex with an absorbance maximum at 745 nm. The total analysis time was 2.5 min. The ultra high performance liquid chromatography method provided the lowest detection and quantitation limits and the most precise and accurate results. All three newly developed methods were demonstrated to be specific, linear, sensitive, precise, and accurate, providing results satisfactorily meeting the requirements of the pharmaceutical industry, and can be employed for the routine determination of the active pharmaceutical ingredient in the tablet dosage form. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Managing the oral side-effects of medications used to treat multiple sclerosis.

    Science.gov (United States)

    Cockburn, N; Pateman, K; Taing, M W; Pradhan, A; Ford, P J

    2017-09-01

    Many medications used to manage multiple sclerosis (MS) affect oral health. This review aimed to identify the oral side-effects of the current drugs recommended in Australia to treat MS and make dental practitioners aware of the range of symptoms. The Australian Therapeutic Guidelines and the Australian Medicines Handbook were searched for medications used to treat MS. For each medication, the generic name, class, route of administration, dosage and drug company reported side-effects were extracted from the online Monthly Index of Medical Specialties (MIMs) database. Meyler's Side-effect of Drugs Encyclopaedia was used to identify any additional oral adverse reactions to medications used to treat MS. Fourteen drugs were identified for the treatment of MS progression and 13 drugs for the treatment of MS symptoms. For these medications, 18 oral side-effects were documented: xerostomia was the most common, followed by dysgeusia, dysphagia, mouth ulceration and sinusitis. Anticholinergic drugs caused xerostomia while immunosuppressants resulted in more infection-related side-effects. Dental practitioners should be aware of the range of symptoms likely to be reported by this population. Clinicians are encouraged to continue providing dental care for their patients who develop MS and refer complex cases to specialists. © 2017 Australian Dental Association.

  19. Single oral dose toxicity test of platycodin d, a saponin from platycodin radix in mice.

    Science.gov (United States)

    Lee, Won-Ho; Gam, Cheol-Ou; Ku, Sae-Kwang; Choi, Seong-Hun

    2011-12-01

    The object of this study was to evaluate the single oral dose toxicity of platycodin D, a saponin from the root of Platycodon grandiflorum in male and female mice. Platycodin D was administered to female and male mice as an oral dose of 2000, 1000, 500, 250 and 125 mg/kg (body wt.). Animals were monitored for the mortality and changes in body weight, clinical signs and gross observation during 14 days after treatment, upon necropsy, organ weight and histopathology of 14 principle organs were examined. As the results, no platycodin D treatment related mortalities, clinical signs, changes on the body and organ weights, gross and histopathological observations against 14 principle organs were detected up to 2000 mg/kg in both female and male mice. Therefore, LD50 (50% lethal dose) and approximate LD of playtcodin D after single oral treatment in female and male mice were considered over 2000 mg/kg - the limited dosages recommended by KFDA Guidelines [2009-116, 2009], respectively.

  20. Cytokine production by oral and peripheral blood neutrophils in adult periodontitis.

    Science.gov (United States)

    Galbraith, G M; Hagan, C; Steed, R B; Sanders, J J; Javed, T

    1997-09-01

    Proinflammatory cytokines such as tumor necrosis factor-alpha (TNF-alpha) and interleukin 1 beta (IL-1 beta) also possess bone-resorptive properties, and are generally considered to play a role in the pathogenesis of periodontal disease. In the present study, TNF-alpha and IL-1 beta production by oral and peripheral blood polymorphonuclear leukocytes (PMN) was examined in 40 patients with adult periodontitis and 40 orally healthy matched controls. Oral PMN released considerable amounts of both cytokines in unstimulated culture, and there was no difference between patients and controls when the cytokine levels were corrected for cell number. However, when the effect of disease activity was examined, cytokine release by oral PMN was found to be greatest in patients with advanced periodontitis. Within the healthy control group, IL-1 beta production by oral PMN was significantly higher in males (Mann-Whitney test, P = 0.0008). Examination of IL-1 beta production by peripheral blood PMN exposed to recombinant human granulocyte-macrophage colony stimulating factor revealed no difference between the patient and control groups. In contrast, IL-1 beta production by peripheral blood PMN was significantly reduced in patients with advanced disease (Mann-Whitney test, P = 0.02), and peripheral PMN IL-1 beta synthesis was greater in female controls (Mann-Whitney test, P = 0.054). No effect of race on cytokine production could be discerned in patients or controls. These results indicate that several factors influence cytokine production in oral health and disease, and that a dichotomy in cytokine gene expression exists between oral and peripheral blood PMN in adult periodontitis.

  1. Dosage-dependent non-linear effect of L-dopa on human motor cortex plasticity.

    Science.gov (United States)

    Monte-Silva, Katia; Liebetanz, David; Grundey, Jessica; Paulus, Walter; Nitsche, Michael A

    2010-09-15

    The neuromodulator dopamine affects learning and memory formation and their likely physiological correlates, long-term depression and potentiation, in animals and humans. It is known from animal experiments that dopamine exerts a dosage-dependent, inverted U-shaped effect on these functions. However, this has not been explored in humans so far. In order to reveal a non-linear dose-dependent effect of dopamine on cortical plasticity in humans, we explored the impact of 25, 100 and 200 mg of L-dopa on transcranial direct current (tDCS)-induced plasticity in twelve healthy human subjects. The primary motor cortex served as a model system, and plasticity was monitored by motor evoked potential amplitudes elicited by transcranial magnetic stimulation. As compared to placebo medication, low and high dosages of L-dopa abolished facilitatory as well as inhibitory plasticity, whereas the medium dosage prolonged inhibitory plasticity, and turned facilitatory plasticity into inhibition. Thus the results show clear non-linear, dosage-dependent effects of dopamine on both facilitatory and inhibitory plasticity, and support the assumption of the importance of a specific dosage of dopamine optimally suited to improve plasticity. This might be important for the therapeutic application of dopaminergic agents, especially for rehabilitative purposes, and explain some opposing results in former studies.

  2. Human metabolism and excretion kinetics of the fragrance lysmeral after a single oral dosage.

    Science.gov (United States)

    Scherer, Max; Koch, Holger M; Schütze, Andre; Pluym, Nikola; Krnac, Dusan; Gilch, Gerhard; Leibold, Edgar; Scherer, Gerhard

    2017-03-01

    2-(4-tert-Butylbenzyl)propionaldehyde, also known as lysmeral, lilial or lily-aldehyde (CAS No 80-54-6) is a synthetic fragrance used in a variety of consumer products like perfumes, after shave lotions, cosmetics and others. Due to its broad application, lysmeral was selected for the development of a biomonitoring method for the general population within the frame of the cooperation project of the Federal Ministry for the Environment (BMUB) and the German Chemical Industry Association (VCI). The project also comprises the identification of suitable biomarkers of exposure in human urine as well as basic toxicokinetic data after defined, experimental exposure. For this purpose, 5 healthy subjects were orally dosed once with 5.26mg lysmeral. Urine was collected immediately before and for 48h after administration of the fragrance. The lysmeral metabolites lysmerol, lysmerylic acid, hydroxylated lysmerylic acid and 4-tert-butylbenzoic acid (TBBA) were determined in all urine samples by a newly developed UPLC-MS/MS (ultra-high pressure liquid chromatography combined with tandem mass spectrometry) method. Peak excretion for all metabolites occurred between 2 and 5h after oral application, with the primary metabolites (lysmerol and lysmerylic acid) being excreted about 1h earlier than the secondary metabolites (hydroxylated lysmerylic acid and TBBA). More than 90% of all measured lysmeral metabolites were excreted after 12h, with the renal excretion being virtually complete after 48h. After this time period, TBBA, lysmerol, lysmerylic acid and hydroxyl-lysmerylic acid represent on average 14.3, 1.82, 0.20 and 0.16%, respectively, of the dose administered. In total, the 4 metabolites determined represent about 16.5% of the dose. With the conversion factors derived from the controlled human study, we estimated median exposure doses for lysmeral in a group of 40 human volunteers from the general population of approximately 140-220μg per day. In conclusion, the lysmeral

  3. Effect of an interactive voice response system on oral anticoagulant management.

    Science.gov (United States)

    Oake, Natalie; van Walraven, Carl; Rodger, Marc A; Forster, Alan J

    2009-04-28

    Monitoring oral anticoagulants is logistically challenging for both patients and medical staff. We evaluated the effect of adding an interactive voice response system to computerized decision support for oral anticoagulant management. We developed an interactive voice response system to communicate to patients the results of international normalized ratio testing and their dosage schedules for anticoagulation therapy. The system also reminded patients of upcoming and missed appointments for blood tests. We recruited patients whose anticoagulation control was stable after at least 3 months of warfarin therapy. We prospectively examined clinical data and outcomes for these patients for an intervention period of at least 3 months. We also collected retrospective data for each patient for the 3 months before study enrolment. We recruited 226 patients between Nov. 23, 2006, and Aug. 1, 2007. The mean duration of the intervention period (prospective data collection) was 4.2 months. Anticoagulation control was similar for the periods during and preceding the intervention (mean time within the therapeutic range 80.3%, 95% confidence interval [CI] 77.5% to 83.1% v. 79.9%, 95% CI 77.3% to 82.6%). The interactive voice response system delivered 1211 (77.8%) of 1557 scheduled dosage messages, with no further input required from clinic staff. The most common reason for clinic staff having to deliver the remaining messages (accounting for 143 [9.2%] of all messages) was an international normalized ratio that was excessively high or low, (i.e., 0.5 or more outside the therapeutic range). When given the option, 76.6% of patients (164/214) chose to continue with the interactive voice response system for management of their anticoagulation after the study was completed. The system reduced staff workload for monitoring anticoagulation therapy by 48 min/wk, a 33% reduction from the baseline of 2.4 hours. Interactive voice response systems have a potential role in improving the

  4. Formulation of cyclodextrin inclusion complex-based orally disintegrating tablet of eslicarbazepine acetate for improved oral bioavailability

    International Nuclear Information System (INIS)

    Desai, Samixa; Poddar, Aditi; Sawant, Krutika

    2016-01-01

    The present investigation was aimed towards developing a beta-cyclodextrin (β-CD) solid dispersion (SD) based orally disintegrating tablet (ODT) of eslicarbazepine acetate (ESL), for improving the dissolution and providing fast onset of anti-epileptic action. Optimum ratio of ESL and β-CD was determined by Job's plot. Thereafter, solid dispersions were prepared by solvent evaporation method and evaluated for yield, assay, Differential scanning calorimetry (DSC), Fourier transform infra red spectroscopy (FTIR), X-ray diffraction (XRD), and in vitro dissolution. Optimized SD was compressed into ODT by direct compression using super disintegrants and evaluated for wetting time, drug content, in vitro drug release and in vivo studies. The results of DSC, FTIR and XRD analysis supported the formation of inclusion complex. An improved dissolution with 99.95 ± 2.80% drug release in 60 min was observed in comparison to 24.85 ± 2.96% release from a plain drug suspension. Tablets with crosspovidone as a super disintegrant showed the least disintegration time of 24.66 ± 1.52 s and higher in vitro drug release against marketed tablets. In vivo studies indicated that the formulated tablets had 2 times higher bioavailability than marketed tablets. Thus, the developed β-CD–ESL SD-ODT could provide faster onset of action and higher bioavailability, which would be beneficial in case of epileptic seizures. - Highlights: • β-cyclodextrin–eslicarbazepine acetate complex developed with enhanced solubility. • Formulated Orally disintegrating tablets (ODT) disintegrated within 30 s. • Bioavailability from ODT was 2 times higher than marketed tablets. • Onset of action for ODT was also faster than marketed tablets. • Formulated ODT would aid epileptic patients incapable of swallowing tablets.

  5. Formulation of cyclodextrin inclusion complex-based orally disintegrating tablet of eslicarbazepine acetate for improved oral bioavailability

    Energy Technology Data Exchange (ETDEWEB)

    Desai, Samixa; Poddar, Aditi; Sawant, Krutika, E-mail: dr_krutikasawant@yahoo.co.in

    2016-01-01

    The present investigation was aimed towards developing a beta-cyclodextrin (β-CD) solid dispersion (SD) based orally disintegrating tablet (ODT) of eslicarbazepine acetate (ESL), for improving the dissolution and providing fast onset of anti-epileptic action. Optimum ratio of ESL and β-CD was determined by Job's plot. Thereafter, solid dispersions were prepared by solvent evaporation method and evaluated for yield, assay, Differential scanning calorimetry (DSC), Fourier transform infra red spectroscopy (FTIR), X-ray diffraction (XRD), and in vitro dissolution. Optimized SD was compressed into ODT by direct compression using super disintegrants and evaluated for wetting time, drug content, in vitro drug release and in vivo studies. The results of DSC, FTIR and XRD analysis supported the formation of inclusion complex. An improved dissolution with 99.95 ± 2.80% drug release in 60 min was observed in comparison to 24.85 ± 2.96% release from a plain drug suspension. Tablets with crosspovidone as a super disintegrant showed the least disintegration time of 24.66 ± 1.52 s and higher in vitro drug release against marketed tablets. In vivo studies indicated that the formulated tablets had 2 times higher bioavailability than marketed tablets. Thus, the developed β-CD–ESL SD-ODT could provide faster onset of action and higher bioavailability, which would be beneficial in case of epileptic seizures. - Highlights: • β-cyclodextrin–eslicarbazepine acetate complex developed with enhanced solubility. • Formulated Orally disintegrating tablets (ODT) disintegrated within 30 s. • Bioavailability from ODT was 2 times higher than marketed tablets. • Onset of action for ODT was also faster than marketed tablets. • Formulated ODT would aid epileptic patients incapable of swallowing tablets.

  6. [Evaluation of N2O inhalation and oral midazolam conscious sedation in pediatric dentistry of children with intellectual disability].

    Science.gov (United States)

    Tian, Xiao-hua; Yang, Yan-zhong; Li, Xiao-feng

    2015-06-01

    To evaluate the effect of N2O inhalation and oral midazolam sedation on uncooperative patients with intellectual disability in pediatric dentistry. N2O inhalation (35%-50%) and oral midazolam conscious sedation (dosages range: 0.50-0.75 mg/kg) were applied to 67 uncooperative pediatric patients with intellectual disability in outpatient department. The patients were divided into 2 groups: group A (N2O inhalation conscious sedation) and group B(oral midazolam conscious sedation).Treatment results and safety were statistically analyzed by Chi-square test with SPSSl3.0 software package. The mean success rate was 70%. The success rate in group B (75%) was higher than group A (67%). The overall incidence of adverse reactions was 13%(9/67). The adverse reaction rate in group B (25%) was significantly higher than group A (5%, P<0.05). N2O inhalation and oral midazolam conscious sedation are effective and safe in pediatric dental uncooperative patients with intellectual disability.

  7. High-performance liquid chromatographic analysis of methadone hydrochloride oral solution.

    Science.gov (United States)

    Beasley, T H; Ziegler, H W

    1977-12-01

    A direct and rapid high-performance liquid chromatographic assay for methadone hydrochloride in a flavored oral solution dosage form is described. A syrup sample, one part diluted with three parts of water, is introduced onto a column packed with octadecylsilane bonded on 10 micrometer porous silica gel (reversed phase). A formic acid-ammonium formate-buffered mobile phase is linear programmed with acetonitrile. The absorbance is monitored continuously at 280 or 254 nm, using a flow-through, UV, double-beam photometer. An aqueous methadone hydrochloride solution is used for external standardization. The relative standard deviation was not more than 1.0%. Drug recovery from a syrup base was better than 99.8%.

  8. Ability of human oral microbiota to produce wine odorant aglycones from odourless grape glycosidic aroma precursors.

    Science.gov (United States)

    Muñoz-González, Carolina; Cueva, Carolina; Ángeles Pozo-Bayón, M; Victoria Moreno-Arribas, M

    2015-11-15

    Grape aroma precursors are odourless glycosides that represent a natural reservoir of potential active odorant molecules in wines. Since the first step of wine consumption starts in the oral cavity, the processing of these compounds in the mouth could be an important factor in influencing aroma perception. Therefore, the objective of this work has been to evaluate the ability of human oral microbiota to produce wine odorant aglycones from odourless grape glycosidic aroma precursors previously isolated from white grapes. To do so, two methodological approaches involving the use of typical oral bacteria or the whole oral microbiota isolated from human saliva were followed. Odorant aglycones released in the culture mediums were isolated and analysed by HS-SPME-GC/MS. Results showed the ability of oral bacteria to hydrolyse grape aroma precursors, releasing different types of odorant molecules (terpenes, benzenic compounds and lipid derivatives). The hydrolytic activity seemed to be bacteria-dependent and was subject to large inter-individual variability. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. An investigation of effects of modification processes on physical properties and mechanism of drug release for sustaining drug release from modified rice

    Energy Technology Data Exchange (ETDEWEB)

    Ngo, Vuong Duy; Luu, Thinh Duc; Van Vo, Toi [Pharmaceutical Engineering Laboratory, Biomedical Engineering Department, International University, Vietnam National University, Ho Chi Minh City (Viet Nam); Tran, Van-Thanh [Faculty of Pharmacy, University of Medicine and Pharmacy, Ho Chi Minh City (Viet Nam); Duan, Wei [School of Medicine, Deakin University, Pigdons Road, Waurn Ponds, Victoria (Australia); Tran, Phuong Ha-Lien, E-mail: phuong.tran1@deakin.edu.au [School of Medicine, Deakin University, Pigdons Road, Waurn Ponds, Victoria (Australia); Tran, Thao Truong-Dinh, E-mail: ttdthao@hcmiu.edu.vn [Pharmaceutical Engineering Laboratory, Biomedical Engineering Department, International University, Vietnam National University, Ho Chi Minh City (Viet Nam)

    2016-10-01

    The aim of this study was to investigate the effect of modification processes on physical properties and explain the mechanism of sustained drug release from modified rice (MR). Various types of Vietnamese rice were introduced in the study as the matrices of sustained release dosage form. Rice was thermally modified in water for a determined temperature at different times with a simple process. Then tablets containing MR and isradipine, the model drug, were prepared to investigate the capability of sustained drug release. Scanning electron microscopy (SEM) was used to determine different morphologies between MR formulations. Flow property of MR was analyzed by Hausner ratio and Carr's indices. The dissolution rate and swelling/erosion behaviors of tablets were evaluated at pH 1.2 and pH 6.8 at 37 ± 0.5 °C. The matrix tablet containing MR showed a sustained release as compared to the control. The SEM analyses and swelling/erosion studies indicated that the morphology as well as swelling/erosion rate of MR were modulated by modification time, drying method and incubation. It was found that the modification process was crucial because it could highly affect the granule morphologies and hence, leading to the change of flowability and swelling/erosion capacity for sustained release of drug. - Highlights: • Modification process affected granule morphologies and flowability of modified rice. • Modification process affected swelling/erosion capacity for drug sustained release. • Freeze-drying could decrease the erosion as well as increase the swelling rate.

  10. An investigation of effects of modification processes on physical properties and mechanism of drug release for sustaining drug release from modified rice

    International Nuclear Information System (INIS)

    Ngo, Vuong Duy; Luu, Thinh Duc; Van Vo, Toi; Tran, Van-Thanh; Duan, Wei; Tran, Phuong Ha-Lien; Tran, Thao Truong-Dinh

    2016-01-01

    The aim of this study was to investigate the effect of modification processes on physical properties and explain the mechanism of sustained drug release from modified rice (MR). Various types of Vietnamese rice were introduced in the study as the matrices of sustained release dosage form. Rice was thermally modified in water for a determined temperature at different times with a simple process. Then tablets containing MR and isradipine, the model drug, were prepared to investigate the capability of sustained drug release. Scanning electron microscopy (SEM) was used to determine different morphologies between MR formulations. Flow property of MR was analyzed by Hausner ratio and Carr's indices. The dissolution rate and swelling/erosion behaviors of tablets were evaluated at pH 1.2 and pH 6.8 at 37 ± 0.5 °C. The matrix tablet containing MR showed a sustained release as compared to the control. The SEM analyses and swelling/erosion studies indicated that the morphology as well as swelling/erosion rate of MR were modulated by modification time, drying method and incubation. It was found that the modification process was crucial because it could highly affect the granule morphologies and hence, leading to the change of flowability and swelling/erosion capacity for sustained release of drug. - Highlights: • Modification process affected granule morphologies and flowability of modified rice. • Modification process affected swelling/erosion capacity for drug sustained release. • Freeze-drying could decrease the erosion as well as increase the swelling rate.

  11. Efficacy of nystatin for the treatment of oral candidiasis: a systematic review and meta-analysis

    Directory of Open Access Journals (Sweden)

    Lyu X

    2016-03-01

    Full Text Available Xin Lyu, Chen Zhao, Zhi-min Yan, Hong HuaDepartment of Oral Medicine, Peking University School and Hospital of Stomatology, Beijing, People’s Republic of ChinaObjective: To systematically review and assess the efficacy, different treatment protocols (formulation, dosage, and duration, and safety of nystatin for treating oral candidiasis.Methods: Four electronic databases were searched for trials published in English till July 1, 2015. Randomized controlled trials comparing nystatin with other antifungal therapies or a placebo were included. Clinical and/or mycological cure was the outcome evaluation. A meta-analysis or descriptive study on the efficacy, treatment protocols, and safety of nystatin was conducted.Results: The meta-analysis showed that nystatin pastille was significantly superior to placebo in treating denture stomatitis. Nystatin suspension was not superior to fluconazole in treating oral candidiasis in infants, children, or HIV/AIDS patients. The descriptive investigations showed that administration of nystatin suspension and pastilles in combination for 2 weeks might achieve a higher clinical and mycological cure rate, and using the nystatin pastilles alone might have a higher mycological cure rate, when compared with using nystatin suspensions alone. Nystatin pastilles at a dose of 400,000 IU resulted in a significantly higher mycological cure rate than that administrated at a dose of 200,000 IU. Furthermore, treatment with nystatin pastilles for 4 weeks seemed to have better clinical efficacy than treatment for 2 weeks. Descriptive safety assessment showed that poor taste and gastrointestinal adverse reaction are the most common adverse effects of nystatin.Conclusion: Nystatin pastille was significantly superior to placebo in treating denture stomatitis, while nystatin suspension was not superior to fluconazole in treating oral candidiasis in infants, children, or HIV/AIDS patients. Indirect evidence from a descriptive study

  12. Crystalline structure of pulverized dental calculus induces cell death in oral epithelial cells.

    Science.gov (United States)

    Ziauddin, S M; Yoshimura, A; Montenegro Raudales, J L; Ozaki, Y; Higuchi, K; Ukai, T; Kaneko, T; Miyazaki, T; Latz, E; Hara, Y

    2018-06-01

    Dental calculus is a mineralized deposit attached to the tooth surface. We have shown that cellular uptake of dental calculus triggers nucleotide-binding oligomerization domain-like receptor family pyrin domain-containing 3 (NLRP3) inflammasome activation, leading to the processing of the interleukin-1β precursor into its mature form in mouse and human phagocytes. The activation of the NLRP3 inflammasome also induced a lytic form of programmed cell death, pyroptosis, in these cells. However, the effects of dental calculus on other cell types in periodontal tissue have not been investigated. The aim of this study was to determine whether dental calculus can induce cell death in oral epithelial cells. HSC-2 human oral squamous carcinoma cells, HOMK107 human primary oral epithelial cells and immortalized mouse macrophages were exposed to dental calculus or 1 of its components, hydroxyapatite crystals. For inhibition assays, the cells were exposed to dental calculus in the presence or absence of cytochalasin D (endocytosis inhibitor), z-YVAD-fmk (caspase-1 inhibitor) or glyburide (NLRP3 inflammasome inhibitor). Cytotoxicity was determined by measuring lactate dehydrogenase (LDH) release and staining with propidium iodide. Tumor necrosis factor-α production was quantified by enzyme-linked immunosorbent assay. Oral epithelial barrier function was examined by permeability assay. Dental calculus induced cell death in HSC-2 cells, as judged by LDH release and propidium iodide staining. Dental calculus also induced LDH release from HOMK107 cells. Following heat treatment, dental calculus lost its capacity to induce tumor necrosis factor-α in mouse macrophages, but could induce LDH release in HSC-2 cells, indicating a major role of inorganic components in cell death. Hydroxyapatite crystals also induced cell death in both HSC-2 and HOMK107 cells, as judged by LDH release, indicating the capacity of crystal particles to induce cell death. Cell death induced by dental

  13. Effect of single oral doses of sitagliptin, a dipeptidyl peptidase-4 inhibitor, on incretin and plasma glucose levels after an oral glucose tolerance test in patients with type 2 diabetes

    DEFF Research Database (Denmark)

    Herman, Gary A; Bergman, Arthur; Stevens, Catherine

    2006-01-01

    CONTEXT: In response to a meal, glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic peptide (GIP) are released and modulate glycemic control. Normally these incretins are rapidly degraded by dipeptidyl peptidase-4 (DPP-4). DPP-4 inhibitors are a novel class of oral antihyperglyce......CONTEXT: In response to a meal, glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic peptide (GIP) are released and modulate glycemic control. Normally these incretins are rapidly degraded by dipeptidyl peptidase-4 (DPP-4). DPP-4 inhibitors are a novel class of oral...... antihyperglycemic agents in development for the treatment of type 2 diabetes. The degree of DPP-4 inhibition and the level of active incretin augmentation required for glucose lowering efficacy after an oral glucose tolerance test (OGTT) were evaluated. OBJECTIVE: The objective of the study was to examine...... concentrations; and sitagliptin pharmacokinetics. RESULTS: Sitagliptin dose-dependently inhibited plasma DPP-4 activity over 24 h, enhanced active GLP-1 and GIP levels, increased insulin/C-peptide, decreased glucagon, and reduced glycemic excursion after OGTTs administered at 2 and 24 h after single oral 25...

  14. Carnauba wax as a promising excipient in melt granulation targeting the preparation of mini-tablets for sustained release of highly soluble drugs.

    Science.gov (United States)

    Nart, Viviane; Beringhs, André O'Reilly; França, Maria Terezinha; de Espíndola, Brenda; Pezzini, Bianca Ramos; Stulzer, Hellen Karine

    2017-01-01

    Mini-tablets are a new tendency in solid dosage form design for overcoming therapeutic obstacles such as impaired swallowing and polypharmacy therapy. Among their advantages, these systems offer therapeutic benefits such as dose flexibility and combined drug release patterns. The use of lipids in the formulation has also drawn considerable interest as means to modify the drug release from the dosage form. Therefore, this paper aimed at developing sustained release mini-tablets containing the highly soluble drugs captopril and metformin hydrochloride. Carnauba wax was used as a lipid component in melt granulation, targeting the improvement of the drugs poor flowability and tabletability, as well as to sustain the drug release profiles in association with other excipients. To assist sustaining the drug release, Ethocel™ (EC) and Kollicoat® SR 30D associated with Opadry® II were employed as matrix-forming and reservoir-forming materials, respectively. The neat drugs, granules and the bulk formulations were evaluated for their angle of repose, compressibility index, Hausner ratio and tabletability. Mini-tablets were evaluated for their weight variation, hardness, friability, drug content and in-vitro drug release. The results indicated that melt granulation with carnauba wax improved the flow and the tabletability of the drugs, allowing the preparation of mini-tablets with adequate tensile strength under reduced compaction pressures. All mini-tablet formulations showed acceptable hardness (within the range of 1.16 to 3.93Kp) and friability (carnauba wax proved to be a promising excipient in melt granulation targeting the preparation of mini-tablets for sustained release of soluble drugs. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Nanosized sustained-release pyridostigmine bromide microcapsules: process optimization and evaluation of characteristics

    Science.gov (United States)

    Tan, Qunyou; Jiang, Rong; Xu, Meiling; Liu, Guodong; Li, Songlin; Zhang, Jingqing

    2013-01-01

    Background Pyridostigmine bromide (3-[[(dimethylamino)-carbonyl]oxy]-1-methylpyridinium bromide), a reversible inhibitor of cholinesterase, is given orally in tablet form, and a treatment schedule of multiple daily doses is recommended for adult patients. Nanotechnology was used in this study to develop an alternative sustained-release delivery system for pyridostigmine, a synthetic drug with high solubility and poor oral bioavailability, hence a Class III drug according to the Biopharmaceutics Classification System. Novel nanosized pyridostigmine-poly(lactic acid) microcapsules (PPNMCs) were expected to have a longer duration of action than free pyridostigmine and previously reported sustained-release formulations of pyridostigmine. Methods The PPNMCs were prepared using a double emulsion-solvent evaporation method to achieve sustained-release characteristics for pyridostigmine. The preparation process for the PPNMCs was optimized by single-factor experiments. The size distribution, zeta potential, and sustained-release behavior were evaluated in different types of release medium. Results The optimal volume ratio of inner phase to external phase, poly(lactic acid) concentration, polyvinyl alcohol concentration, and amount of pyridostigmine were 1:10, 6%, 3% and 40 mg, respectively. The negatively charged PPNMCs had an average particle size of 937.9 nm. Compared with free pyridostigmine, PPNMCs showed an initial burst release and a subsequent very slow release in vitro. The release profiles for the PPNMCs in four different types of dissolution medium were fitted to the Ritger-Peppas and Weibull models. The similarity between pairs of dissolution profiles for the PPNMCs in different types of medium was statistically significant, and the difference between the release curves for PPNMCs and free pyridostigmine was also statistically significant. Conclusion PPNMCs prepared by the optimized protocol described here were in the nanometer range and had good uniformity

  16. The effect of different dosage regimens of tranexamic acid on blood loss in bimaxillary osteotomy: a randomized, double-blind, placebo-controlled study.

    Science.gov (United States)

    Apipan, B; Rummasak, D; Narainthonsaenee, T

    2018-05-01

    The purpose of this study was to compare the effects of three dosage regimens of intravenous tranexamic acid and normal saline placebo on blood loss and the requirement for transfusion during bimaxillary osteotomy. A prospective, randomized, double-blind, placebo-controlled study was performed. Eighty patients scheduled for elective bimaxillary osteotomy were divided into four groups: a placebo group and three groups receiving a single dose of tranexamic acid 10, 15, or 20mg/kg body weight after the induction of anaesthesia. Demographic data, the anaesthetic time, the operative time, and the experience of the surgical team were similar in the four groups. Patients receiving placebo had increased blood loss compared to those receiving tranexamic acid. No significant difference in blood loss was found among those who received 10, 15, or 20mg/kg body weight of tranexamic acid. There was no significant difference in transfusion requirement, amount of 24-h postoperative vacuum drainage, length of hospital stay, or complications among the four groups. Prophylactic tranexamic acid decreased bleeding during bimaxillary osteotomy. Of the three dosages of tranexamic acid studied, the most efficacious and cost-effective dose to reduce bleeding was 10mg/kg body weight. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  17. Simultaneous release of diclofenac sodium and papaverine hydrochloride from tablets and pellets using the flow-through cell apparatus described by dimensionless equations.

    Science.gov (United States)

    Kasperek, Regina

    2011-01-01

    The release of diclofenac sodium and papaverine hydrochloride from tablets and pellets using the flow-through cell apparatus was studied. The influence of excipients and of a size of the solid dosage forms on the amount of the released substances at the intervals of time using the different rates of flow of the dissolution medium was investigated. Physical parameters corresponding to the dissolution process as the mass transfer coefficient, the thickness of the boundary diffusion layer and the concentration of the saturated solution at this layer were calculated. The results of release were described by dimensionless equations.

  18. Ketoprofen-loaded Eudragit electrospun nanofibers for the treatment of oral mucositis

    Directory of Open Access Journals (Sweden)

    Reda RI

    2017-03-01

    Full Text Available Rana Ihab Reda,1 Ming Ming Wen,2 Amal Hassan El-Kamel1 1Department of Pharmaceutics, Faculty of Pharmacy, Alexandria University, 2Department of Pharmaceutics, Faculty of Pharmacy and Drug Manufacturing, Pharos University in Alexandria, Alexandria, Egypt Purpose: The purpose of this study was to formulate ketoprofen (KET-loaded Eudragit L and Eudragit S nanofibers (NFs by the electrospinning technique for buccal administration to treat oral mucositis as a safe alternative to orally administered KET, which causes gastrointestinal tract (GIT side effects. Materials and methods: NFs were prepared by electrospinning using Eudragit L and Eudragit S. Several variables were evaluated to optimize NF formulation, such as polymer types and concentrations, applied voltage, flow rate and drug concentrations. Differential scanning calorimetry (DSC, Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM and analyses of drug contents, hydration capacity, surface pH, drug release and ex vivo permeation were performed to evaluate the NFs. The selected formulation (F1 was evaluated in vivo on induced oral mucositis in rabbits. Results: SEM revealed that 20% polymer formed smooth and bead-free NFs. DSC results confirmed the amorphous nature of KET in the NFs. FTIR confirmed hydrogen bond formation between the drug and polymer, which stabilized the NFs. Both formulations (F1 and F2 had an acceptable surface pH. The drug loading was >90%. The amount of KET released from NF formulations was statistically significantly higher (P≤0.001 than that released from the corresponding solvent-casted films. The complete release of KET from F1 occurred within 2 hours. Ex vivo permeation study revealed that only a small fraction of drug permeated from F1, which was a better candidate than F2 for local buccal delivery. In vivo evaluation of F1 on oral mucositis induced in rabbits demonstrated that F1 reduced the clinical severity of mucositis in

  19. Oral ileocolonic drug delivery by the colopulse-system : A bioavailability study in healthy volunteers

    NARCIS (Netherlands)

    Schellekens, R C A; Stellaard, F; Olsder, G G; Woerdenbag, H J; Frijlink, H W; Kosterink, J G W

    2010-01-01

    The release profile of a novel oral ileocolonic drug delivery technology (ColoPulse-technology) was assessed by a combination of conventional kinetics of a marker substance in blood and site-specific signaling by stable isotope technology. Since ileocolonic delivery involves the drug release in a

  20. Intrathecal baclofen in multiple sclerosis and spinal cord injury: complications and long-term dosage evolution.

    Science.gov (United States)

    Draulans, Nathalie; Vermeersch, Kristof; Degraeuwe, Bart; Meurrens, Tom; Peers, Koen; Nuttin, Bart; Kiekens, Carlotte

    2013-12-01

    To investigate the long-term dosage evolution and complication rate of intrathecal baclofen use in multiple sclerosis and spinal cord injury patients, based on a large population with a long follow-up. Retrospective data analysis. Academic hospital. Patients with multiple sclerosis (n = 81) or spinal cord injury (n = 49) having an intrathecal baclofen pump implanted at the University Hospitals Leuven between 1988 and 2009. Medical records review of included patients in August 2010. Complications linked to intrathecal baclofen therapy. Daily baclofen dosage after 3 and 6 months, and yearly thereafter. Data on dosage evolution were analysed using a mixed-effect linear model. In 130 patients with a mean follow-up of 63 months, comprising 797 pump years, 104 complications were recorded. This corresponds to a complication rate of 0.011 per month, equally divided among both groups. Seventy-eight of these complications were catheter related. The mean dosage of baclofen stabilizes two years after implantation at 323 µg/day in the multiple sclerosis population. In spinal cord injury patients the daily dose only stabilizes after five years at a significantly higher dosage (504 µg/day). No significant increase in dosage is seen in the long term. In multiple sclerosis and spinal cord injury patients, intrathecal baclofen therapy has a complication rate of 1% per month. Complications are mainly due to catheter-related problems (74%). The intrathecal baclofen dosage stabilizes in the long term, indicating that long-term tolerance, defined as progressive diminution of the susceptibility to the effects of a drug, is not present.

  1. A novel and alternative approach to controlled release drug delivery system based on solid dispersion technique

    Directory of Open Access Journals (Sweden)

    Tapan Kumar Giri

    2012-12-01

    Full Text Available The solid dispersion method was originally used to improve the dissolution properties and the bioavailability of poorly water soluble drugs by dispersing them into water soluble carriers. In addition to the above, dissolution retardation through solid dispersion technique using water insoluble and water swellable polymer for the development of controlled release dosage forms has become a field of interest in recent years. Development of controlled release solid dispersion has a great advantage for bypassing the risk of a burst release of drug; since the structure of the solid dispersion is monolithic where drug molecules homogeneously disperse. Despite the remarkable potential and extensive research being conducted on controlled release solid dispersion system, commercialization and large scale production are limited. The author expects that recent technological advances may overcome the existing limitations and facilitate the commercial utilization of the techniques for manufacture of controlled release solid dispersions. This article begins with an overview of the different carriers being used for the preparation of controlled release solid dispersion and also different techniques being used for the purpose. Kinetics of drug release from these controlled release solid dispersions and the relevant mathematical modeling have also been reviewed in this manuscript.

  2. Evaluation of Potential Drug–Drug Interaction Between Delayed‐Release Dimethyl Fumarate and a Commonly Used Oral Contraceptive (Norgestimate/Ethinyl Estradiol) in Healthy Women

    Science.gov (United States)

    Nestorov, Ivan; Zhao, Guolin; Meka, Venkata; Leahy, Mark; Kam, Jeanelle; Sheikh, Sarah I.

    2017-01-01

    Abstract Delayed‐release dimethyl fumarate (DMF) is an oral therapy for relapsing multiple sclerosis with anti‐inflammatory and neuroprotective properties. This 2‐period crossover study was conducted to evaluate the potential for drug–drug interaction between DMF (240 mg twice daily) and a combined oral contraceptive (OC; norgestimate 250 μg, ethinyl estradiol 35 μg). Forty‐six healthy women were enrolled; 32 completed the study. After the lead‐in period (OC alone), 41 eligible participants were randomized 1:1 to sequence 1 (OC and DMF coadministration in period 1; OC alone in period 2) or sequence 2 (regimens reversed). Mean concentration profiles of plasma norelgestromin (primary metabolite of norgestimate) and ethinyl estradiol were superimposable following OC alone and OC coadministered with DMF, with 90% confidence intervals of geometric mean ratios for area under the plasma concentration–time curve over the dosing interval and peak plasma concentration contained within the 0.8–1.25 range. Low serum progesterone levels during combined treatment confirmed suppression of ovulation. The pharmacokinetics of DMF (measured via its primary active metabolite, monomethyl fumarate) were consistent with historical data when DMF was administered alone. No new safety concerns were identified. These results suggest that norgestimate/ethinyl estradiol–based OCs may be used with DMF without dose modification. PMID:28783872

  3. Spectrophotometric Determination of Cilostazol in Tablet Dosage Form

    African Journals Online (AJOL)

    Purpose: To develop simple, rapid and selective spectrophotometric methods for the determination of cilostazol in tablet dosage form. Methods: Cilostazol was dissolved in 50 % methanol and its absorbance was scanned by ultraviolet (UV) spectrophotometry. Both linear regression equation and standard absorptivity were ...

  4. Interchangeability and comparative effectiveness between generic and brand montelukast immediate release tablets after a single oral administration in healthy volunteers.

    Science.gov (United States)

    Zaid, Abdel Naser; Mousa, Ayman; Ghazal, Nadia; Bustami, Rana

    2015-01-01

    Montelukast is a leukotriene receptor antagonist. The release of leukotrienes causes narrowing and constricting in the respiratory airways. Blocking the action of these leukotrienes, montelukast can be used for the prophylaxis and treatment of chronic asthma. The aim of this study was to evaluate the interchangeability and comparative effectiveness between a generic and a brand montelukast 10 mg immediate release tablets (Broncast(®) and Singulair(®), respectively) after a single oral dose among Arab Mediterranean volunteers. An open-label, randomized two-period crossover bioequivalence design was conducted in 31 healthy male volunteers with a 1 week washout between each study period and under fasting conditions. The plasma drug concentration was assessed by using a previously validated LC MS/MS method. The ratio between the generic and brand of geometric least squares means was reported for both generic and brand products. Moreover, an in vitro dissolution study was conducted on generic and brand tablets using three different pH media, and similarity and non-similarity factors (f2 and f1) were calculated. The used bioanalytical method was found to be linear within the range 6.098-365.855 ng/mL. The correlation coefficient was close to 0.999 during the course of the study validation. Statistical comparison of the main pharmacokinetic parameters showed the inexistence of any significant difference between generic and the brand. The point estimates (ratios of geometric means) were 111.939, 111.711, and 112.169 % for AUC0-24, AUC0-∞, and Cmax, respectively. The 90 % confidence intervals (CIs) were within the pre-defined limits of 80.00-125.00 % as specified by the FDA and EMA for bioequivalence studies. F2 and f1 were higher than 50 and lower than 15, respectively in all selected pH media. Broncast(®) immediate release film coated tablets (10 mg/tablet) are bioequivalent to Singulair(®) immediate release film coated tablets (10 mg/tablet), with a

  5. Natural gums and modified natural gums as sustained-release carriers.

    Science.gov (United States)

    Bhardwaj, T R; Kanwar, M; Lal, R; Gupta, A

    2000-10-01

    Although natural gums and their derivatives are used widely in pharmaceutical dosage forms, their use as biodegradable polymeric materials to deliver bioactive agents has been hampered by the synthetic materials. These natural polysaccharides do hold advantages over the synthetic polymers, generally because they are nontoxic, less expensive, and freely available. Natural gums can also be modified to have tailor-made materials for drug delivery systems and thus can compete with the synthetic biodegradable excipients available in the market. In this review, recent developments in the area of natural gums and their derivatives as carriers in the sustained release of drugs are explored.

  6. Recent advances and perspectives in topical oral anesthesia.

    Science.gov (United States)

    Franz-Montan, Michelle; Ribeiro, Lígia Nunes de Morais; Volpato, Maria Cristina; Cereda, Cintia Maria Saia; Groppo, Francisco Carlos; Tofoli, Giovana Randomille; de Araújo, Daniele Ribeiro; Santi, Patrizia; Padula, Cristina; de Paula, Eneida

    2017-05-01

    Topical anesthesia is widely used in dentistry to reduce pain caused by needle insertion and injection of the anesthetic. However, successful anesthesia is not always achieved using the formulations that are currently commercially available. As a result, local anesthesia is still one of the procedures that is most feared by dental patients. Drug delivery systems (DDSs) provide ways of improving the efficacy of topical agents. Areas covered: An overview of the structure and permeability of oral mucosa is given, followed by a review of DDSs designed for dental topical anesthesia and their related clinical trials. Chemical approaches to enhance permeation and anesthesia efficacy, or to promote superficial anesthesia, include nanostructured carriers (liposomes, cyclodextrins, polymeric nanoparticle systems, solid lipid nanoparticles, and nanostructured lipid carriers) and different pharmaceutical dosage forms (patches, bio- and mucoadhesive systems, and hydrogels). Physical methods include pre-cooling, vibration, iontophoresis, and microneedle arrays. Expert opinion: The combination of different chemical and physical methods is an attractive option for effective topical anesthesia in oral mucosa. This comprehensive review should provide the readers with the most relevant options currently available to assist pain-free dental anesthesia. The findings should be considered for future clinical trials.

  7. Optimizing the dosage of stabilizing chemical

    OpenAIRE

    Harjula, Tomi

    2013-01-01

    A chemical company provides chemical treatment at customer mill in paper industry. This thesis work was done to determine the optimum dosage of stabilizing chemical. The theoretical framework explains the basics of paper brightness and bleaching and how these topics are connected to each other. The knowledge gained is very valuable and can possibly be used in the future in other similar applications as well. This thesis work contains confidential back ground information. Key ...

  8. Development and characterization of a gastroretentive dosage form composed of chitosan and hydroxyethyl cellulose for alendronate

    Directory of Open Access Journals (Sweden)

    Chen YC

    2013-12-01

    Full Text Available Ying-Chen Chen,1,* Hsiu-O Ho,1,* Chiao-Chi Chiu,1 Ming-Thau Sheu1,2 1School of Pharmacy, College of Pharmacy, Taipei Medical University, 2Clinical Research Center and Traditional Herbal Medicine Research Center, Taipei Medical University Hospital, Taipei, Taiwan*These authors contributed equally to this workAbstract: In this study, alendronate, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastroretentive dosage form (GRDF tablets to enhance its oral bioavailability. GRDF tablets were characterized with the effects of different molecular weights (MWs of chitosan (CS and hydroxyethyl cellulose (HEC at various ratios on swelling, floating, and physical integrity. The CS component was formed using various acids: acetic, lactic, malic, succinic, and citric, and a high viscosity grade of HEC was selected. The results demonstrated that the swelling ratios of the formulations comprising high MW CS were lower than those of low or medium MW CS when salts were formed with any countering acids except for acetic acid. The decreasing ranking of the swelling rates was: CS-citrate > CS-malate > CS-lactate > CS-succinate > CS-acetate. A negative correlation was found between the pKa of the respective countering acid and the swelling rate. The swelling rate was promoted if an acidic salt of CS with a lower water content was incorporated, while it became slower when tablet hardness was higher or the compression force to form tablets was increased. Although HEC did not contribute to swelling or floating, it played a role in maintaining structural integrity. A prolonged dissolution profile of alendronate GRDF tablets developed in this study was observed.Keywords: gastroretentive dosage form, chitosan, hydrogel, hydroxyethyl cellulose, swelling, alendronate

  9. Methotrexate Dosage Reduction Upon Adalimumab Initiation: Clinical and Ultrasonographic Outcomes from the Randomized Noninferiority MUSICA Trial.

    Science.gov (United States)

    Kaeley, Gurjit S; Evangelisto, Amy M; Nishio, Midori J; Goss, Sandra L; Liu, Shufang; Kalabic, Jasmina; Kupper, Hartmut

    2016-08-01

    To examine the clinical and ultrasonographic (US) outcomes of reducing methotrexate (MTX) dosage upon initiating adalimumab (ADA) in MTX-inadequate responders with moderately to severely active rheumatoid arthritis (RA). MUSICA (NCT01185288) was a double-blind, randomized, parallel-arm study of 309 patients with RA receiving MTX ≥ 15 mg/week for ≥ 12 weeks before screening. Patients were randomized to high dosage (20 mg/week) or low dosage (7.5 mg/week) MTX; all patients received 40 mg open-label ADA every other week for 24 weeks. The primary endpoint was Week 24 mean 28-joint Disease Activity Score based on C-reactive protein (DAS28-CRP) to test for noninferiority of low-dosage MTX using a 15% margin. US images were scored using a 10-joint semiquantitative system incorporating OMERACT definitions for pathology, assessing synovial hypertrophy, vascularity, and bony erosions. Rapid improvement in clinical indices was observed in both groups after addition of ADA. The difference in mean DAS28-CRP (0.37, 95% CI 0.07-0.66) comparing low-dosage (4.12, 95% CI 3.88-4.34) versus high-dosage MTX (3.75, 95% CI 3.52-3.97) was statistically significant and non-inferiority was not met. Statistically significant differences were not detected for most clinical, functional, and US outcomes. Pharmacokinetic and safety profiles were similar. In MUSICA, Week 24 mean DAS28-CRP, the primary endpoint, did not meet non-inferiority for the low-dosage MTX group. Although the differences between the 2 MTX dosage groups were small, our study findings did not support routine MTX reduction in MTX inadequate responders initiating ADA.

  10. Measurement of the lowest dosage of phenobarbital that can produce drug discrimination in rats

    Science.gov (United States)

    Overton, Donald A.; Stanwood, Gregg D.; Patel, Bhavesh N.; Pragada, Sreenivasa R.; Gordon, M. Kathleen

    2009-01-01

    Rationale Accurate measurement of the threshold dosage of phenobarbital that can produce drug discrimination (DD) may improve our understanding of the mechanisms and properties of such discrimination. Objectives Compare three methods for determining the threshold dosage for phenobarbital (D) versus no drug (N) DD. Methods Rats learned a D versus N DD in 2-lever operant training chambers. A titration scheme was employed to increase or decrease dosage at the end of each 18-day block of sessions depending on whether the rat had achieved criterion accuracy during the sessions just completed. Three criterion rules were employed, all based on average percent drug lever responses during initial links of the last 6 D and 6 N sessions of a block. The criteria were: D%>66 and N%50 and N%33. Two squads of rats were trained, one immediately after the other. Results All rats discriminated drug versus no drug. In most rats, dosage decreased to low levels and then oscillated near the minimum level required to maintain criterion performance. The lowest discriminated dosage significantly differed under the three criterion rules. The squad that was trained 2nd may have benefited by partially duplicating the lever choices of the previous squad. Conclusions The lowest discriminated dosage is influenced by the criterion of discriminative control that is employed, and is higher than the absolute threshold at which discrimination entirely disappears. Threshold estimations closer to absolute threshold can be obtained when criteria are employed that are permissive, and that allow rats to maintain lever preferences. PMID:19082992

  11. [Post-marketing re-evaluation about usage and dosage of Chinese medicine based on human population pharmacokinetics].

    Science.gov (United States)

    Jiang, Junjie; Xie, Yanming

    2011-10-01

    The usage and dosage of Chinese patent medicine are determined by rigorous evaluation which include four clinical trail stages: I, II, III. But the usage and dosage of Chinese patent medicine are lacked re-evaluation after marketing. And this lead to unchanging or fixed of the usage and dosage of Chinese patent medicine instead of different quantity based on different situations in individual patients. The situation of Chinese patent medicine used in clinical application is far away from the idea of the "Treatment based on syndrome differentiation" in traditional Chinese medicine and personalized therapy. Human population pharmacokinetics provides data support to the personalized therapy in clinical application, and achieved the postmarking reevaluating of the usage and dosage of Chinese patent medicine. This paper briefly introduced the present situation, significance and the application of human population pharmacokinetics about re-evaluation of the usage and dosage of Chinese patent medicine after marketing.

  12. Mast Cells: Key Players in the Shadow in Oral Inflammation and in Squamous Cell Carcinoma of the Oral Cavity

    Science.gov (United States)

    Gaje, Pusa Nela; Amalia Ceausu, Raluca; Jitariu, Adriana; Popovici, Ramona Amina; Raica, Marius

    2016-01-01

    Although mast cells (MCs) have been discovered over 130 years ago, their function was almost exclusively linked to allergic affections. At the time being, it is well known that MCs possess a great variety of roles, in both physiologic and pathologic conditions. In the oral tissues, MCs release different proinflammatory cytokines, tumor necrosis factor alpha (TNF-α), that promote leukocyte infiltration in various inflammatory states of the oral cavity. These cells play a key role in the inflammatory process and, as a consequence, their number changes in different pathologic conditions of the oral cavity, like gingivitis, periodontitis, and so on. MCs also represent a rich source of proteases, especially of mast cell tryptase and chymase, which directly degrade the extracellular matrix through their proteolytic activity and thus indirectly stimulate angiogenesis and facilitate invasion and metastasis. It may be stated that mast cells could have an impact on primary tumor development, progression, and metastases in oral squamous cell carcinoma. By understanding the role of mast cells in the pathogenesis of different inflammatory and tumor diseases of the oral cavity, these cells may become therapeutic targets that could possibly improve the prognosis and survival of these patients. PMID:27847826

  13. Development of Modified-Release Tablets of Zolpidem Tartrate by Biphasic Quick/Slow Delivery System

    OpenAIRE

    Mahapatra, Anjan Kumar; Sameeraja, N. H.; Murthy, P. N.

    2014-01-01

    Zolpidem tartrate is a non-benzodiazepine analogue of imidazopyridine of sedative and hypnotic category. It has a short half-life with usual dosage regimen being 5 mg, two times a day, or 10 mg, once daily. The duration of action is considered too short in certain circumstances. Thus, it is desirable to lengthen the duration of action. The formulation design was implemented by preparing extended-release tablets of zolpidem tartrate using the biphasic delivery system technology, where sodium s...

  14. Challenges and opportunities in establishing scientific and regulatory standards for determining therapeutic equivalence of modified-release products: Workshop summary report.

    Science.gov (United States)

    Chen, Mei-Ling; Shah, Vinod P; Ganes, Derek; Midha, Kamal K; Caro, James; Nambiar, Prabu; Rocci, Mario L; Thombre, Avinash G; Abrahamsson, Bertil; Conner, Dale; Davit, Barbara; Fackler, Paul; Farrell, Colm; Gupta, Suneel; Katz, Russell; Mehta, Mehul; Preskorn, Sheldon H; Sanderink, Gerard; Stavchansky, Salomon; Temple, Robert; Wang, Yaning; Winkle, Helen; Yu, Lawrence

    2010-09-01

    Modified-release (MR) products are complex dosage forms designed to release drug in a controlled manner to achieve the desired efficacy and safety profiles. Inappropriate control of drug release from such products may result in reduced efficacy or increased toxicity. This paper is a summary report of the American Association of Pharmaceutical Scientists, International Pharmaceutical Federation, and Product Quality Research Institute workshop titled "Challenges and Opportunities in Establishing Scientific and Regulatory Standards for Assuring Therapeutic Equivalence of Modified Release Products", held October 1-2, 2009, in Baltimore, Maryland. The workshop provided an opportunity for pharmaceutical scientists from academia, industry, and regulatory agencies to discuss current regulatory expectations and industry practices for evaluating the pharmaceutical equivalence and bioequivalence of oral MR products. In the case of conventional monophasic MR formulations, the current regulatory approaches and criteria for bioequivalence evaluation were considered adequate for the assessment of therapeutic equivalence and inter-changeability of drug products. Additional measures may occasionally be needed to determine the bioequivalence of multiphasic MR products. The metric of partial AUC proposed by the US Food and Drug Administration received broad support as an additional measure for evaluating bioequivalence of multiphasic MR products designed to have a rapid onset of drug action followed by sustained response. The cutoff for partial AUCs may be based on the pharmacokinetic/pharmacodynamic or pharmacokinetic/ response characteristics of the products under examination. If the new metric is highly variable, the bioequivalence limits may be set based on the known within-subject variability for the reference product. The current regulatory approaches and criteria for bioequivalence evaluation were considered adequate for the assessment of therapeutic equivalence and

  15. Boxing and mixed martial arts: preliminary traumatic neuromechanical injury risk analyses from laboratory impact dosage data.

    Science.gov (United States)

    Bartsch, Adam J; Benzel, Edward C; Miele, Vincent J; Morr, Douglas R; Prakash, Vikas

    2012-05-01

    In spite of ample literature pointing to rotational and combined impact dosage being key contributors to head and neck injury, boxing and mixed martial arts (MMA) padding is still designed to primarily reduce cranium linear acceleration. The objects of this study were to quantify preliminary linear and rotational head impact dosage for selected boxing and MMA padding in response to hook punches; compute theoretical skull, brain, and neck injury risk metrics; and statistically compare the protective effect of various glove and head padding conditions. An instrumented Hybrid III 50th percentile anthropomorphic test device (ATD) was struck in 54 pendulum impacts replicating hook punches at low (27-29 J) and high (54-58 J) energy. Five padding combinations were examined: unpadded (control), MMA glove-unpadded head, boxing glove-unpadded head, unpadded pendulum-boxing headgear, and boxing glove-boxing headgear. A total of 17 injury risk parameters were measured or calculated. All padding conditions reduced linear impact dosage. Other parameters significantly decreased, significantly increased, or were unaffected depending on padding condition. Of real-world conditions (MMA glove-bare head, boxing glove-bare head, and boxing glove-headgear), the boxing glove-headgear condition showed the most meaningful reduction in most of the parameters. In equivalent impacts, the MMA glove-bare head condition induced higher rotational dosage than the boxing glove-bare head condition. Finite element analysis indicated a risk of brain strain injury in spite of significant reduction of linear impact dosage. In the replicated hook punch impacts, all padding conditions reduced linear but not rotational impact dosage. Head and neck dosage theoretically accumulates fastest in MMA and boxing bouts without use of protective headgear. The boxing glove-headgear condition provided the best overall reduction in impact dosage. More work is needed to develop improved protective padding to minimize

  16. Oral transmucosal delivery of naratriptan.

    Science.gov (United States)

    Sattar, Mohammed; Lane, Majella E

    2016-11-30

    Naratriptan (NAR) is currently used as the hydrochloride salt (NAR.HCl) for the treatment of migraine and is available in tablet dosage forms for oral administration. Buccal drug delivery offers a number of advantages compared with conventional oral delivery including rapid absorption, avoidance of first pass metabolism and improved patient compliance. We have previously prepared and characterised the base form of NAR and shown that it has more favourable properties for buccal delivery compared with NAR.HCl. This study describes the design and evaluation of a range of formulations for oral transmucosal delivery of NAR base. Permeation studies were conducted using excised porcine buccal tissue mounted in Franz cells. Of the neat solvents examined, Transcutol ® P (TC) showed the greatest enhancement effects and was the vehicle in which NAR was most soluble. The mechanisms by which TC might promote permeation were further probed using binary systems containing TC with either buffer or Miglyol 812 ® (MG). Mass balance studies were also conducted for these systems. The permeation of TC as well as NAR was also monitored for TC:MG formulations. Overall, TC appears to promote enhanced membrane permeation of NAR because of its rapid uptake into the buccal tissue. Synergistic enhancement of buccal permeation was observed when TC was combined with MG and this is attributed to the increased thermodynamic activity of NAR in these formulations. Significantly enhanced permeation of NAR was achieved for TC:MG and this was also associated with less TC remaining on the tissue or in the tissue at the end of the experiment. To our knowledge this is the first report where both enhancer and active have been monitored in buccal permeation studies. The findings underline the importance of understanding the fate of vehicle components for rational formulation design of buccal delivery systems. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Oral Chromium Exposure and Toxicity

    Science.gov (United States)

    Sun, Hong; Brocato, Jason

    2015-01-01

    Hexavalent chromium [Cr(VI)] is a known carcinogen when inhaled. However, inhalational exposure to Cr(VI) affects only a small portion of the population, mainly by occupational exposures. In contrast, oral exposure to Cr(VI) is widespread and affects many people throughout the globe. In 2008, the National Toxicology Program (NTP) released a 2-year study demonstrating that ingested Cr(VI) was carcinogenic in rats and mice. The effects of Cr(VI) oral exposure is mitigated by reduction in the gut, however a portion evades the reductive detoxification and reaches target tissues. Once Cr(VI) enters the cell, it ultimately gets reduced to Cr(III), which mediates its toxicity via induction of oxidative stress during the reduction while Cr intermediates react with protein and DNA. Cr(III) can form adducts with DNA that may lead to mutations. This review will discuss the potential adverse effects of oral exposure to Cr(VI) by presenting up-to-date human and animal studies, examining the underlying mechanisms that mediate Cr(VI) toxicity, as well as highlighting opportunities for future research. PMID:26231506

  18. [Influence of tendencies toward depression, neurosis and psychosomatic disorders on oral symptoms].

    Science.gov (United States)

    Sasaki, Emi

    2005-12-01

    This study revealed that the tendencies towards depression, neurosis, and psychosomatic disorders have effects on oral symptoms. The total number of subjects was 102. The subjects were divided into two groups using the SDS (Self-rating Depression Scale): a control group of 66 subjects with an SDS value of less than 40, and a group of 36 subjects having depression tendencies with an SDS value of over 50. Most of the subjects in the depression tendency group showed symptoms of neurosis and psychosomatic disorders as well. The two groups were compared on the basis of their psychological characteristics, dosages of medicine taken, esthesis of mouth dryness, glossalgia, salivary flow rate, oral wettability, existence of dental cavities, and condition of the oral mucosa. No xerostomia at the mucobuccal fold was observed in the depression tendency group. However, there was an evident decrease of the resting salivary flow rate and the wettability of proglossis. It is considered that such a decrease resulted in an increase in the symptoms derived from xerostomia or esthesis of mouth dryness. The number of conservable but untreated dental cavities in the depression tendency group was larger than that in the control group with a significant difference, suggesting that both oral self-care and dental care management tended to be inadequate in the depression tendency group.

  19. Preparation and investigation of Ulex europaeus agglutinin I-conjugated liposomes as potential oral vaccine carriers.

    Science.gov (United States)

    Li, KeXin; Chen, DaWei; Zhao, XiuLi; Hu, HaiYang; Yang, ChunRong; Pang, DaHai

    2011-11-01

    We prepared and optimized Ulex europaeus agglutinin I (UEAI)-modified Bovine serum albumin (BSA)-encapsulating liposomes (UEAI-LIP) as oral vaccine carriers and examined the feasibility of inducing systemic and mucosal immune responses by oral administration of UEAILIP. The prepared systems were characterized in vitro for their average size, zeta potential, encapsulation efficiency (EE%) and conjugation efficiency (CE%). In vitro release studies indicated that the presence of UEAI around the optimized liposomes was able to prevent a burst release of loaded BSA and provide sustained release of the encapsulated protein. In vivo immune-stimulating results in KM mice showed that BSA given intramuscularly generated systemic response only but both systemic and mucosal immune responses could be induced simultaneously in the groups in which BSA-loaded liposomes (LIP) and UEAI-LIP were administered intragastrically. Furthermore, the modification of UEAI on the surface of liposomes could further enhance the IgA and IgG levels obviously. In conclusion, this study demonstrated the high potential of lectin-modified liposomes containing the antigen as carriers for oral vaccine.

  20. Sustained-release liquisolid compact tablets containing artemether-lumefantrine as alternate-day regimen for malaria treatment to improve patient compliance

    Directory of Open Access Journals (Sweden)

    Nnamani PO

    2016-11-01

    yield and encapsulation efficiency were ~92% and 93% for Precirol® ATO 5/Transcutol® HP batch, then 81% and 95% for tallow fat/Transcutol® HP batch while LUM was amorphous in NLC matrix. In vitro AL release from liquisolid compacts revealed initial burst release and subsequent sustained release. Liquisolid tablet compacts formulated with Precirol® ATO 5/Transcutol® HP-AL4 achieved higher LUM release in simulated intestinal fluid (84.32% than tallow fat/Transcutol® HP-BL3 (77.9%. Non-Fickian (anomalous diffusion and super case II transport were the predominant mechanisms of drug release. Equal parasitemia reduction was observed for both batches of tablet compacts (~92%, superior to the reduction obtained with commercial antimalarial formulations: Coartem® tablets (86% and chloroquine phosphate tablets (66%. No significant difference (P<0.05 in parasite reduction between double (4/24 mg/kg and single (2/12 mg/kg strength doses of AL compacts was observed. Our result highlights that AL could be formulated in much lower doses (4/24 mg/kg, for once-in-two days oral administration to improve patient compliance, which is currently not obtainable with conventional AL dosage forms. Keywords: malaria, artemisinin-based combination therapy, antiplasmodial activity, liquisolid compacts, nanostructured lipid carriers