WorldWideScience

Sample records for release drug delivery

  1. Molecularly imprinted nanotubes for enantioselective drug delivery and controlled release.

    Science.gov (United States)

    Yin, Junfa; Cui, Yue; Yang, Gengliang; Wang, Hailin

    2010-11-07

    Molecularly imprinted nanotubes for enantioselective drug delivery and controlled release are fabricated by the combination of template synthesis and ATRP grafting. The release of R-propranolol from the imprinted nanotubes in rats is restricted while the release of pharmacologically active S-enantiomer is greatly promoted.

  2. A REVIEW ON ADVANCES OF SUSTAINED RELEASE DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Sujit Bose

    2013-06-01

    Full Text Available Sustained release matrix tablets facilitate prolonged and continuous drug release and improve the bioavailability of drugs while avoiding unwanted side effects. Ofloxacin is a broad spectrum antibacterial agent used for treating wide range of gram positive and gram negative infections. The goal in designing sustained or controlled delivery systems is to reduce frequency of dosing or to increase the effectiveness of the drug by localization at the site of action, reducing the dose required, providing uniform drug delivery. Sustained release drug administration means not only prolongation of duration of drug delivery, but the term also implies the predictability and reproducibility of drug release kinetics. The controlled release of drug substances and their effective transport to sites of action can be exploited to maximize the beneficial clinical response and to minimize the incidence of unbeneficial adverse reactions and side effects. Oral ingestion has long been the most convenient and commonly employed route of drug delivery. Indeed, for sustained release systems, oral route of administration has received most of the attention with respect to research on physiological and drug constraints as well as design and testing of products.

  3. Modified release drug delivery in veterinary medicine.

    Science.gov (United States)

    Rathbone, Michael J; Martinez, Marilyn N

    2002-08-01

    To successfully research and develop an animal pharmaceutical dosage form, a diverse array of issues covering basic medicine, pharmacology and technology must be addressed. Societal concerns regarding animal and public health, as well as the rapidly changing farming and economic environments, provide additional challenges that require integration into an already complex web of issues. Here, we examine the drive towards reducing the frequency of administration to animals and the closing of gaps between the human and veterinary drug product development.

  4. Improved nanoparticles preparation and drug release for liver targeted delivery

    Directory of Open Access Journals (Sweden)

    Qiao Weili

    2009-05-01

    Full Text Available "nTargeted delivery of drugs and proteins to liver can be achieved via asialoglycoprotein receptor, which can recognize and combine the galactose- and N-acetygalatosamine-terminated glycoproteins. Glycosyl is usually conjugated with drugs directly to fabricate prodrugs or with nanoparticles encapsulated drugs via forming covalent bonds, while the covalent bonds may lead to some shortages for drug release. Therefore, we have a hypothesis that we can prepare nanoparticles for efficient targeting by glycosylation using galactosylated poly (L-glutamic acid (Gal-PLGA as a carrier to entrap the model drugs in nanoparticles core physically rather than forming covalent drug conjugation. The means of incorporation of drug in nanoparticles may improve drug release to maintain its activity, raise its therapeutic index and diminish the adverse effect. Based on previous researches, it is achievable to obtain nanoparticles that we hypothesize to prepare. Due to their nanometer-size and galactosyl, the nanoparticles may be a potential delivery system for passive and active targeting to liver parenchymal cells for therapy of hepatitis and liver cancer.

  5. Mechanoresponsive materials for drug delivery: Harnessing forces for controlled release.

    Science.gov (United States)

    Wang, Julia; Kaplan, Jonah A; Colson, Yolonda L; Grinstaff, Mark W

    2017-01-01

    Mechanically-activated delivery systems harness existing physiological and/or externally-applied forces to provide spatiotemporal control over the release of active agents. Current strategies to deliver therapeutic proteins and drugs use three types of mechanical stimuli: compression, tension, and shear. Based on the intended application, each stimulus requires specific material selection, in terms of substrate composition and size (e.g., macrostructured materials and nanomaterials), for optimal in vitro and in vivo performance. For example, compressive systems typically utilize hydrogels or elastomeric substrates that respond to and withstand cyclic compressive loading, whereas, tension-responsive systems use composites to compartmentalize payloads. Finally, shear-activated systems are based on nanoassemblies or microaggregates that respond to physiological or externally-applied shear stresses. In order to provide a comprehensive assessment of current research on mechanoresponsive drug delivery, the mechanical stimuli intrinsically present in the human body are first discussed, along with the mechanical forces typically applied during medical device interventions, followed by in-depth descriptions of compression, tension, and shear-mediated drug delivery devices. We conclude by summarizing the progress of current research aimed at integrating mechanoresponsive elements within these devices, identifying additional clinical opportunities for mechanically-activated systems, and discussing future prospects.

  6. NAIL AS A PROMISING DRUG DELIVERY SYSTEM FOR CONTROLLED RELEASE

    Directory of Open Access Journals (Sweden)

    G. Sai Krishna*, P. Prem Kumar, K. Bala Murugan

    2013-03-01

    Full Text Available ABSTRACT: The effectiveness of topical therapies is limited by minimal drug permeability through the nail plate. Nail permeability is however quite low and limits topical therapy to early/mild disease states such as onychomycosis (fungal infections of the nail. Current research on nail permeation that focuses on altering the nail plate barrier by means of chemical treatments, penetration enhancers as well as physical and mechanical methods is reviewed also the recent research into ungual drug delivery is reviewed, a new method of nail sampling is examined. Topical therapy is worth pursuing however, as local action is required in many nail disorders. Drug transport into the nail plate can be assisted by filing the nail plate before topical application of drug formulations as well as by the use of chemical enhancers. Finally limitations of current ungual drug permeability studies are briefly discussed and the factors, which affect drug uptake and permeation through the nail plate such as solute molecular size, hydrophilicity/hydrophobicity, charge, and the nature of the vehicle, are then discussed, and drug-containing nail lacquers which, like cosmetic varnish, are brushed onto the nail plates to form a film, and from which drug is released and penetrates into the nail are reviewed. The nail plate behaves like a concentrated hydrogel to permeating molecules and diffusion of molecules through the nail plate has been compared to the diffusion of non-electrolytes through polymer gels. Thus, for optimal ungual permeation and uptake, drug molecules must be of small size and be uncharged.

  7. Mathematical modelling of the release of drug from porous, nonswelling transdermal drug-delivery devices.

    Science.gov (United States)

    Lee, A J; King, J R; Hibberd, S

    1998-06-01

    A general model is presented for the release of drug from porous nonswelling, transdermal drug-delivery devices and it is shown to reduce to previously proposed models in suitable limits. The processes which govern the release of drug are considered to be diffusion of dissolved drug and dissolution of dispersed drug, both in the body of the device and in the device pores, and transfer of drug between the two domains. In the classical limit of large dissolution rates, the problem reduces to one of the moving-boundary type, and solution of this problem in the case where the initial drug loading is much greater than the drug solubility in the device yields expressions for the flux of drug to a perfect sink (modelling in vitro conditions). It is shown that behaviour greatly differing from the classical first-order drug delivery (alpha t 1/2) may be exhibited, depending upon the parameter regime. In some situations the dissolution rates may not be so large and solutions of the general model are derived in the case where the dispersed drug is considered to be undepleted and the diffusivity in the solvent-filled pores is much larger than in the body of the delivery device. Numerical studies are undertaken, and the coupling of delivery device and skin-diffusion models (in order to model the complete transdermal drug-delivery process) is also considered.

  8. pH-triggered drug release from biodegradable microwells for oral drug delivery

    DEFF Research Database (Denmark)

    Nielsen, Line Hagner; Nagstrup, Johan; Gordon, Sarah;

    2015-01-01

    Microwells fabricated from poly-L-lactic acid (PLLA) were evaluated for their application as an oral drug delivery system using the amorphous sodium salt of furosemide (ASSF) as a model drug. Hot embossing of PLLA resulted in fabrication of microwells with an inner diameter of 240 μm and a height...... of microwell cavities with an Eudragit® layer prevented drug release in biorelevant gastric medium. An immediate release of the ASSF from coated microwells was observed in the intestinal medium. This pH-triggered release behavior demonstrates the future potential of PLLA microwells as a site-specific oral drug...

  9. Solid lipid nanoparticles (SLN) for controlled drug delivery--drug release and release mechanism.

    Science.gov (United States)

    zur Mühlen, A; Schwarz, C; Mehnert, W

    1998-03-01

    Solid lipid nanoparticles (SLN) are particulate systems for parenteral drug administration with mean particle diameters ranging from 50 up to 1000 nm. The model drugs tetracaine, etomidate and prednisolone were incorporated (1, 5 and 10%) to study the drug load, effect of drug incorporation on the structure of the lipid matrix and the release profiles and mechanism. SLN were produced by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state (500/1500 bar, 3/10 cycles). In case of tetracaine and etomidate, high drug loadings up to 10% could be achieved when using Compritol 888 ATO and Dynasan 112 as matrix material. The melting behavior of the drug loaded particles revealed that little or no interactions between drug and lipid occurred. A burst drug release (100% release < 1 min) was observed with tetracaine and etomidate SLN, which was attributed to the large surface area of the nanoparticles and drug enrichment in the outer shell of the particles. In contrast, prednisolone loaded SLN showed a distinctly prolonged release over a monitored period of 5 weeks. Depending on the chemical nature of the lipid matrix, 83.8 and 37.1% drug were released (cholesterol and compritol, respectively). These results demonstrate the principle suitability of SLN as a prolonged release formulation for lipophilic drugs.

  10. Magnetothermal release of payload from iron oxide/silica drug delivery agents

    Science.gov (United States)

    Luong, T. T.; Knoppe, S.; Bloemen, M.; Brullot, W.; Strobbe, R.; Locquet, J.-P.; Verbiest, T.

    2016-10-01

    The release of covalently bound Rhodamine B from iron oxide/mesoporous silica core/shell nanoparticles under magnetically induced heating was studied. The system acts as a model to study drug delivery and payload release under magnetothermal heating.

  11. Understanding release kinetics of biopolymer drug delivery microcapsules for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Desai, Salil, E-mail: sdesai@ncat.ed [Department of Industrial and Systems Engineering, North Carolina A and T State University, NC 27411 (United States); Center for Advanced Materials and Smart Structures, North Carolina A and T State University, Greensboro, NC 27411 (United States); Wake Forest University Institute for Regenerative Medicine, Winston-Salem, NC 27157 (United States); Perkins, Jessica [Department of Industrial and Systems Engineering, North Carolina A and T State University, NC 27411 (United States); Center for Advanced Materials and Smart Structures, North Carolina A and T State University, Greensboro, NC 27411 (United States); Harrison, Benjamin S. [Wake Forest University Institute for Regenerative Medicine, Winston-Salem, NC 27157 (United States); Sankar, Jag [Center for Advanced Materials and Smart Structures, North Carolina A and T State University, Greensboro, NC 27411 (United States)

    2010-04-15

    Drug delivery and dosage concentrations are considered as major focal points in conventional as well as battlefield emergency medicine. The concept of localizing drug delivery via microcapsules is an evolving field to confine the adverse side effects of high concentration drug doses. This paper focuses on understanding release kinetics through biopolymer microcapsules for time-dependent drug release. Calcium alginate microcapsules were manufactured using a direct-write inkjet technique. Rhodamine 6G was used as the release agent to observe the release kinetics from calcium alginate beads in distilled water. A design of experiments was constructed to compare the effect of the microcapsule diameter and different concentrations of calcium chloride (M) and sodium alginate (%, w/v) solutions on the release kinetics profiles of the microcapsules. This research gives insight to identify favorable sizes of microcapsules and concentrations of sodium alginate and calcium chloride solutions for controlled release behavior of drug delivery microcapsules.

  12. A Fibrous Localized Drug Delivery Platform with NIR-Triggered and Optically Monitored Drug Release.

    Science.gov (United States)

    Liu, Heng; Fu, Yike; Li, Yangyang; Ren, Zhaohui; Li, Xiang; Han, Gaorong; Mao, Chuanbin

    2016-09-06

    Implantable localized drug delivery systems (LDDSs) with intelligent functionalities have emerged as a powerful chemotherapeutic platform in curing cancer. Developing LDDSs with rationally controlled drug release and real-time monitoring functionalities holds promise for personalized therapeutic protocols but suffers daunting challenges. To overcome such challenges, a series of porous Yb(3+)/Er(3+) codoped CaTiO3 (CTO:Yb,Er) nanofibers, with specifically designed surface functionalization, were synthesized for doxorubicin (DOX) delivery. The content of DOX released could be optically monitored by increase in the intensity ratio of green to red emission (I550/I660) of upconversion photoluminescent nanofibers under 980 nm near-infrared (NIR) excitation owing to the fluorescence resonance energy transfer (FRET) effect between DOX molecules and the nanofibers. More importantly, the 808 nm NIR irradiation enabled markedly accelerated DOX release, confirming representative NIR-triggered drug release properties. In consequence, such CTO:Yb,Er nanofibers presented significantly enhanced in vitro anticancer efficacy under NIR irradiation. This study has thus inspired another promising fibrous LDDS platform with NIR-triggered and optics-monitored DOX releasing for personalized tumor chemotherapy.

  13. Design Project on Controlled-Release Drug Delivery Devices: Implementation, Management, and Learning Experiences

    Science.gov (United States)

    Xu, Qingxing; Liang, Youyun; Tong, Yen Wah; Wang, Chi-Hwa

    2010-01-01

    A design project that focuses on the subject of controlled-release drug delivery devices is presented for use in an undergraduate course on mass transfer. The purpose of the project is to introduce students to the various technologies used in the fabrication of drug delivery systems and provide a practical design exercise for understanding the…

  14. Oral controlled release drug delivery system and Characterization of oral tablets; A review

    Directory of Open Access Journals (Sweden)

    Muhammad Zaman

    2016-01-01

    Full Text Available Oral route of drug administration is considered as the safest and easiest route of drug administration. Control release drug delivery system is the emerging trend in the pharmaceuticals and the oral route is most suitable for such kind of drug delivery system. Oral route is more convenient for It all age group including both pediatric and geriatrics. There are various systems which are adopted to deliver drug in a controlled manner to different target sites through oral route. It includes diffusion controlled drug delivery systems; dissolution controlled drug delivery systems, osmotically controlled drug delivery systems, ion-exchange controlled drug delivery systems, hydrodynamically balanced systems, multi-Particulate drug delivery systems and microencapsulated drug delivery system. The systems are formulated using different natural, semi-synthetic and synthetic polymers. The purpose of the review is to provide information about the orally controlled drug delivery system, polymers which are used to formulate these systems and characterizations of one of the most convenient dosage form which is the tablets. 

  15. Preparation and drug release mechanism of CTS-TAX-NP-MSCs drug delivery system.

    Science.gov (United States)

    Dai, Tian; Yang, Enyun; Sun, Yongjun; Zhang, Linan; Zhang, Li; Shen, Ning; Li, Shuo; Liu, Lei; Xie, Yinghua; Wu, Shaomei; Gao, Zibin

    2013-11-01

    Targeting delivery of anticancer agents is a promising field in anticancer therapy. Inherent tumor-tropic and migratory properties of mesenchymal stem cells (MSCs) make them potential vehicles for targeting drug delivery systems for tumors. Although, MSCs have been successfully studied and discussed as a vehicle for cancer gene therapy, they have not yet been studied adequately as a potential vehicle for traditional chemical anticancer drugs. In this study, we have engineered MSCs as a potential targeting delivery vehicle for paclitaxel (TAX)-loaded nanoparticles (NPs). The size, surface charge, starving time of MSCs, incubating time and concentration of NPs could influence the efficiency of NPs uptake. In vitro release of TAX from CTS (chitosan)-TAX-NP-MSCs and the expression of P-glycoprotein demonstrated that release of TAX from MSCs might involve both passive diffusion and active transport. In vitro migration assays indicated that MSCs at passage number 3 have the highest migrating ability. Although, the migration ability of CTS-TAX-NP-MSCs could be inhibited by uptake of CTS-TAX-NPs, this ability could recover 6 days after the internalization.

  16. Liquid crystalline systems for transdermal delivery of celecoxib: in vitro drug release and skin permeation studies.

    Science.gov (United States)

    Estracanholli, Eder André; Praça, Fabíola Silva Garcia; Cintra, Ana Beatriz; Pierre, Maria Bernadete Riemma; Lara, Marilisa Guimarães

    2014-12-01

    Liquid crystalline systems of monoolein/water could be a promising approach for the delivery of celecoxib (CXB) to the skin because these systems can sustain drug release, improve drug penetration into the skin layers and minimize side effects. This study evaluated the potential of these systems for the delivery of CXB into the skin based on in vitro drug release and skin permeation studies. The amount of CXB that permeated into and/or was retained in the skin was assayed using an HPLC method. Polarizing light microscopy studies showed that liquid crystalline systems of monoolein/water were formed in the presence of CXB, without any changes in the mesophases. The liquid crystalline systems decreased drug release when compared to control solution. Drug release was independent of the initial water content of the systems and CXB was released from cubic phase systems, irrespective of the initial water content. The systems released the CXB following zero-order release kinetics. In vitro drug permeation studies showed that cubic phase systems allowed drug permeation and retention in the skin layers. Cubic phase systems of monoolein/water may be promising vehicles for the delivery of CXB in/through the skin because it improved CXB skin permeation compared with the control solution.

  17. Controlled release of simvastatin from biomimetic β-TCP drug delivery system.

    Directory of Open Access Journals (Sweden)

    Joshua Chou

    Full Text Available Simvastatin have been shown to induce bone formation and there is currently a urgent need to develop an appropriate delivery system to sustain the release of the drug to increase therapeutic efficacy whilst reducing side effects. In this study, a novel drug delivery system for simvastatin by means of hydrothermally converting marine exoskeletons to biocompatible beta-tricalcium phosphate was investigated. Furthermore, the release of simvastatin was controlled by the addition of an outer apatite coating layer. The samples were characterized by x-ray diffraction analysis, fourier transform infrared spectroscopy, scanning electron microscopy and mass spectroscopy confirming the conversion process. The in-vitro dissolution of key chemical compositional elements and the release of simvastatin were measured in simulated body fluid solution showing controlled release with reduction of approximately 25% compared with un-coated samples. This study shows the potential applications of marine structures as a drug delivery system for simvastatin.

  18. Synthetic Zeolites as Controlled-Release Delivery Systems for Anti-Inflammatory Drugs.

    Science.gov (United States)

    Khodaverdi, Elham; Soleimani, Hossein Ali; Mohammadpour, Fatemeh; Hadizadeh, Farzin

    2016-06-01

    Scientists have always been trying to use artificial zeolites to make modified-release drug delivery systems in the gastrointestinal tract. An ideal carrier should have the capability to release the drug in the intestine, which is the main area of absorption. Zeolites are mineral aluminosilicate compounds with regular structure and huge porosity, which are available in natural and artificial forms. In this study, soaking, filtration and solvent evaporation methods were used to load the drugs after activation of the zeolites. Weight measurement, spectroscopy FTIR, thermogravimetry and scanning electronic microscope were used to determine drug loading on the systems. Finally, consideration of drug release was made in a simulated gastric fluid and a simulated intestinal fluid for all matrixes (zeolites containing drugs) and drugs without zeolites. Diclofenac sodium (D) and piroxicam (P) were used as the drug models, and zeolites X and Y as the carriers. Drug loading percentage showed that over 90% of drugs were loaded on zeolites. Dissolution tests in stomach pH environment showed that the control samples (drug without zeolite) released considerable amount of drugs (about 90%) within first 15 min when it was about 10-20% for the matrixes. These results are favorable as NSAIDs irritate the stomach wall and it is ideal not to release much drugs in the stomach. Furthermore, release rate of drugs from matrixes has shown slower rate in comparison with control samples in intestine pH environment.

  19. Mimicking Biological Delivery Through Feedback-Controlled Drug Release Systems Based on Molecular Imprinting.

    Science.gov (United States)

    Kryscio, David R; Peppas, Nicholas A

    2009-06-01

    Intelligent drug delivery systems (DDS) are able to rapidly detect a biological event and respond appropriately by releasing a therapeutic agent; thus, they are advantageous over their conventional counterparts. Molecular imprinting is a promising area that generates a polymeric network which can selectively recognize a desired analyte. This field has been studied for a variety of applications over a long period of time, but only recently has it been investigated for biomedical and pharmaceutical applications. Recent work in the area of molecularly imprinted polymers in drug delivery highlights the potential of these recognitive networks as environmentally responsive DDS that can ultimately lead to feedback controlled recognitive release systems.

  20. Mesoporous Silica Nanoparticles as Controlled Release Drug Delivery and Gene Transfection Carriers

    Energy Technology Data Exchange (ETDEWEB)

    Igor I. Slowing; Juan L. Viveo-Escoto; Chia-Wen Wu; Victor S. Y. Lin

    2008-04-10

    In this review, we highlight the recent research developments of a series of surface-functionalized mesoporous silica nanoparticle (MSN) materials as efficient drug delivery carriers. The synthesis of this type of MSN materials is described along with the current methods for controlling the structural properties and chemical functionalization for biotechnological and biomedical applications. We summarized the advantages of using MSN for several drug delivery applications. The recent investigations of the biocompatibility of MSN in vitro are discussed. We also describe the exciting progress on using MSN to penetrate various cell membranes in animal and plant cells. The novel concept of gatekeeping is introduced and applied to the design of a variety of stimuli-responsive nanodevices. We envision that these MSN-based systems have a great potential for a variety of drug delivery applications, such as the site-specific delivery and intracellular controlled release of drugs, genes, and other therapeutic agents.

  1. Simultaneous monitoring of the drug release and antitumor effect of a novel drug delivery system-MWCNTs/DOX/TC.

    Science.gov (United States)

    Dong, Xia; Sun, Zhiting; Wang, Xiaoxiao; Zhu, Dunwan; Liu, Lanxia; Leng, Xigang

    2017-11-01

    Monitoring drug release and therapeutic efficacy is crucial for developing drug delivery systems. Our preliminary study demonstrated that, as compared with pristine multiwalled carbon nanotubes (MWCNTs), transactivator of transcription (TAT)-chitosan functionalized MWCNTs (MWCNTs-TC) were a more promising candidate for drug delivery in cancer therapy. In the present study, a MWCNTs/TC-based drug delivery system was developed for an anticancer drug, doxorubicin (DOX). The drug loading and in vitro release profiles, cellular uptake and cytotoxicity were assessed. More importantly, the in vivo drug release and antitumor effect of MWCNTs/DOX/TC were evaluated by noninvasive fluorescence and bioluminescence imaging. It was demonstrated that MWCNTs/DOX/TC can be efficiently taken up by BEL-7402 hepatoma cells. The release of DOX from MWCNTs/DOX/TC was faster under lower pH condition, which was beneficial for intrcellular drug release. The in vivo release process of DOX and antitumor effect in animal model were monitored simultaneously by noninvasive fluorescence and luminescence imaging, which demonstrated the application potential of MWCNTs/DOX/TC for cancer therapy.

  2. A novel drug delivery system of gold nanorods with doxorubicin and study of drug release by single molecule spectroscopy.

    Science.gov (United States)

    Mirza, Agha Zeeshan

    2015-01-01

    The work presented here describes the fabrication of a novel drug delivery system, which consists of gold nanorods and doxorubicin, with the attachment of thioctic acid and folic acid, for the targeted release of drug to cancer cells. Doxorubicin, the potent anticancer drug, is widely used to treat various cancers. Gold nanorods were functionalized chemically to generate active groups for the attachment of drug molecules and subsequently attached to folic acid. The resulting nanostructure was characterized by UV-visible-NIR spectrophotometry, TEM techniques, zeta potential measurement and subsequently used to target folate receptor-expressing cancers cells for the delivery of doxorubicin. We generated a release profile for the release of doxorubicin from the nanostructures in KB cells using single-molecule fluorescence intensity images and fluorescence lifetime images. The results indicated that the nanorods were able to enter the target cells because of the attachment of folic acid and used as a carriers for the targeted delivery of doxorubicin.

  3. A New Drug Release Method in Early Development of Transdermal Drug Delivery Systems

    OpenAIRE

    Bing Cai; Karin Söderkvist; Håkan Engqvist; Susanne Bredenberg

    2012-01-01

    In vitro drug release tests are a widely used tool to measure the variance between transdermal product performances and required by many authorities. However, the result cannot provide a good estimation of the in vivo drug release.  In the present work, a new method for measuring drug release from patches has been explored and compared with the conventional USP apparatus 2 and 5 methods. Durogesic patches, here used as a model patch, were placed on synthetic skin simulator and three moisture ...

  4. [Release characteristics in vitro and pharmacokinetics of da chuanxiong fang multiunit drug delivery system in rats].

    Science.gov (United States)

    Wei, Yuan-feng; Zhang, Ning; Lin, Xiao; Feng, Yi

    2011-09-01

    The drug release characteristics ofDa Chuanxiong Fang multiunit drug delivery system (DCXFMDDS) in vivo and in vitro were evaluated. Ferulic acid (FA) and senkyunolide I (SI) were used as marker components, which were two of the effective components of Da Chuanxiong Fang. And their contents were determined by HPLC. Drug release characteristics in vitro of DCXFMDDS and Da Chuanxiong pills and pharmacokinetics characteristics of DCXFMDDS and Da Chuanxiong Fang active fraction (DCXFAF) in rats were compared. It was obvious that FA released from the DCXFMDDS in a sustained fashion but SI in a fast fashion both in vitro and in vivo. The releasing process and the releasing mechanism of FA and SI from DCXFMDDS were different, but the AUC value indicated that compared with DCXFAF the extent of absorption of FA and SI from DCXFMDDS was increased. Though from the same multiunit drug delivery system, FA an SI had different drug release characteristics both in vitro and in vivo, and that may be one of the reason why DCXFMDDS has the good properties such as rapid and long-lasting effect and high efficiency.

  5. NAIL AS A PROMISING DRUG DELIVERY SYSTEM FOR CONTROLLED RELEASE

    OpenAIRE

    G. Sai Krishna*, P. Prem Kumar, K. Bala Murugan

    2013-01-01

    ABSTRACT: The effectiveness of topical therapies is limited by minimal drug permeability through the nail plate. Nail permeability is however quite low and limits topical therapy to early/mild disease states such as onychomycosis (fungal infections of the nail). Current research on nail permeation that focuses on altering the nail plate barrier by means of chemical treatments, penetration enhancers as well as physical and mechanical methods is reviewed also the recent research into ungual dru...

  6. NAIL AS A PROMISING DRUG DELIVERY SYSTEM FOR CONTROLLED RELEASE

    OpenAIRE

    G. Sai Krishna*, P. Prem Kumar, K. Bala Murugan

    2013-01-01

    ABSTRACT: The effectiveness of topical therapies is limited by minimal drug permeability through the nail plate. Nail permeability is however quite low and limits topical therapy to early/mild disease states such as onychomycosis (fungal infections of the nail). Current research on nail permeation that focuses on altering the nail plate barrier by means of chemical treatments, penetration enhancers as well as physical and mechanical methods is reviewed also the recent research into ungual dru...

  7. Folic acid conjugated magnetic drug delivery system for controlled release of doxorubicin

    Science.gov (United States)

    Andhariya, Nidhi; Upadhyay, Ramesh; Mehta, Rasbindu; Chudasama, Bhupendra

    2013-01-01

    Targeting tumors by means of their vascular endothelium is a promising strategy, which utilizes targets that are easily accessible, stable, and do not develop resistance against therapeutic agents. Folate receptor is a highly specific tumor marker, frequently over expressed in cancer tumors. In the present study, an active drug delivery system, which can effectively target cancer cells by means of folate receptor-mediated endocytosis, have ability to escape from opsonization and capability of magnetic targeting to withstand the drag force of the body fluid have been designed and synthesized. The core of the drug delivery system is of mono-domain magnetic particles of magnetite. Magnetite nanoparticles are shielded with PEG, which prevents their phagocytosis by reticuloendothelial system. These PEG shielded magnetite nanoparticles are further decorated with an antitumor receptor—folic acid and loaded with an antineoplastic agent doxorubicin. An in vitro drug loading and release kinetics study reveals that the drug delivery system can take 52 % of drug load and can release doxorubicin over a sustained period of 7 days. The control and sustained release over a period of several days may find its practical utilities in chemotherapy where frequent dosing is not possible.

  8. Folic acid conjugated magnetic drug delivery system for controlled release of doxorubicin

    Energy Technology Data Exchange (ETDEWEB)

    Andhariya, Nidhi, E-mail: nidhiandhariya@gmail.com [Thapar University, School of Physics and Materials Science (India); Upadhyay, Ramesh [Charotar University of Science and Technology, P.D. Patel Institute of Applied Sciences (India); Mehta, Rasbindu [Maharaja Krishnakumarsinhji Bhavnagar University, Department of Physics (India); Chudasama, Bhupendra, E-mail: bnchudasama@gmail.com [Thapar University, School of Physics and Materials Science (India)

    2013-01-15

    Targeting tumors by means of their vascular endothelium is a promising strategy, which utilizes targets that are easily accessible, stable, and do not develop resistance against therapeutic agents. Folate receptor is a highly specific tumor marker, frequently over expressed in cancer tumors. In the present study, an active drug delivery system, which can effectively target cancer cells by means of folate receptor-mediated endocytosis, have ability to escape from opsonization and capability of magnetic targeting to withstand the drag force of the body fluid have been designed and synthesized. The core of the drug delivery system is of mono-domain magnetic particles of magnetite. Magnetite nanoparticles are shielded with PEG, which prevents their phagocytosis by reticuloendothelial system. These PEG shielded magnetite nanoparticles are further decorated with an antitumor receptor-folic acid and loaded with an antineoplastic agent doxorubicin. An in vitro drug loading and release kinetics study reveals that the drug delivery system can take 52 % of drug load and can release doxorubicin over a sustained period of 7 days. The control and sustained release over a period of several days may find its practical utilities in chemotherapy where frequent dosing is not possible.

  9. CONTROLLED RELEASE IN SITU FORMING GATIFLOXACIN HCl HYDROGEL FOR OPHTHALMIC DRUG DELIVERY

    Directory of Open Access Journals (Sweden)

    Pawar Sagar D

    2012-06-01

    Full Text Available Recently, controlled drug delivery has become the standard in modern Pharmaceutical design and an intensive research have been undertaken in achieving much better drug product effectiveness, reliability and safety. This interest has been sparked by the advantages shown by in situ forming polymeric delivery systems such as ease of administration and reduced frequency of administration, improved patient compliance and comfort. In situ hydrogels are instilled as drops into the eye and undergoes a sol to gel transition in the cul-de-sac, improved ocular bioavailability by increasing the duration of contact with corneal tissue, thereby reducing the frequency of administration. The purpose of the present work was to develop an ophthalmic drug delivery system using the three different gelling agents with different mechanisms for in situ gelation of Gatifloxacin hydrochloride, a fluoroquinolone antibiotic. Polyox – a pH sensitive gelling agent and sodium alginate is an ion sensitive gelling agent and Poloxamer – a temperature sensitive gelling agent were employed for the formation of in situ hydrogel along with HPMC K4M as viscofying agent. The promising formulations were evaluated for pH, drug content, in vitro gelation, in vitro drug release, in vivo drug release, ocular irritation.

  10. pH-triggered drug release from biodegradable microwells for oral drug delivery

    DEFF Research Database (Denmark)

    Nielsen, Line Hagner; Nagstrup, Johan; Gordon, Sarah

    2015-01-01

    of 100 μm. The microwells were filled with ASSF using a modified screen printing technique, followed by coating of the microwell cavities with a gastroresistant lid of Eudragit® L100. The release behavior of ASSF from the coated microwells was investigated using a μ-Diss profiler and a UV imaging system......, and under conditions simulating the changing environment of the gastrointestinal tract. Biorelevant gastric medium (pH 1.6) was employed, after which a change to biorelevant intestinal release medium (pH 6.5) was carried out. Both μ-Diss profiler and UV imaging release experiments showed that sealing...... of microwell cavities with an Eudragit® layer prevented drug release in biorelevant gastric medium. An immediate release of the ASSF from coated microwells was observed in the intestinal medium. This pH-triggered release behavior demonstrates the future potential of PLLA microwells as a site-specific oral drug...

  11. A smart multifunctional nanocomposite for intracellular targeted drug delivery and self-release

    Energy Technology Data Exchange (ETDEWEB)

    Wang Chan; Tao Shengyang; Hu Tao; Yang Jingbang; Meng Changgong [School of Chemical Engineering, Dalian University of Technology, Dalian, Liaoning (China); Lv Piping; Wei Wei, E-mail: taosy@dlut.edu.cn [National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing (China)

    2011-10-14

    A multifunctional 'all-in-one' nanocomposite is fabricated using a colloid, template and surface-modification method. This material encompasses magnetic induced target delivery, cell uptake promotion and controlled drug release in one system. The nanocomposite is characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, N{sub 2} adsorption and vibrating sample magnetometry. The prepared material has a diameter of 350-400 nm, a high surface area of 420.29 m{sup 2} g{sup -1}, a pore size of 1.91 nm and a saturation magnetization of 32 emu g{sup -1}. Doxorubicin (DOX) is loaded in mesopores and acid-sensitive blockers are introduced onto the orifices of the mesopores by a Schiff base linker to implement pH-dependent self-release. Folate was also introduced to improve DOX targeted delivery and endocytosis. The linkers remained intact to block pores with ferrocene valves and inhibit the diffusion of DOX at neutral pH. However, in lysosomes of cancer cells, which have a weak acidic pH, hydrolysis of the Schiff base group removes the nanovalves and allows the trapped DOX to be released. These processes are demonstrated by UV-visible absorption spectra, confocal fluorescence microscopy images and methyl thiazolyl tetrazolium assays in vitro, which suggest that the smart nanocomposite successfully integrates targeted drug delivery with internal stimulus induced self-release and is a potentially useful material for nanobiomedicine.

  12. Co-delivery nanoparticles with characteristics of intracellular precision release drugs for overcoming multidrug resistance

    Directory of Open Access Journals (Sweden)

    Zhang DD

    2017-03-01

    Full Text Available DanDan Zhang,1 Yan Yan Kong,1 Jia Hui Sun,1 Shao Jie Huo,1 Min Zhou,2 Yi Ling Gui,1 Xu Mu,1 Huan Chen,1 Shu Qin Yu,1 Qian Xu3 1Jiangsu Province Key Laboratory for Molecular and Medical Biotechnology, College of Life Sciences, Nanjing Normal University, Nanjing, 2School of Pharmacy, Jiangsu Food and Pharmaceutical Science College, Huai’an, 3Ministry of Education Key Laboratory of Environmental Medicine and Engineering, School of Public Health, Southeast University, Nanjing, People’s Republic of China Abstract: Combination chemotherapy in clinical practice has been generally accepted as a feasible strategy for overcoming multidrug resistance (MDR. Here, we designed and successfully prepared a co-delivery system named S-D1@L-D2 NPs, where denoted some smaller nanoparticles (NPs carrying a drug doxorubicin (DOX were loaded into a larger NP containing another drug (vincristine [VCR] via water-in-oil-in-water double-emulsion solvent diffusion-evaporation method. Chitosan-alginate nanoparticles carrying DOX (CS-ALG-DOX NPs with a smaller diameter of about 20 nm formed S-D1 NPs; vitamin E D-α-tocopheryl polyethylene glycol 1000 succinate-modified poly(lactic-co-glycolic acid nanoparticles carrying VCR (TPGS-PLGA-VCR NPs with a larger diameter of about 200 nm constituted L-D2 NPs. Some CS-ALG-DOX NPs loaded into TPGS-PLGA-VCR NPs formed CS-ALG-DOX@TPGS-PLGA-VCR NPs. Under the acidic environment of cytosol and endosome or lysosome in MDR cell, CS-ALG-DOX@TPGS-PLGA-VCR NPs released VCR and CS-ALG-DOX NPs. VCR could arrest cell cycles at metaphase by inhibiting microtubule polymerization in the cytoplasm. After CS-ALG-DOX NPs escaped from endosome, they entered the nucleus through the nuclear pore and released DOX in the intra-nuclear alkaline environment, which interacted with DNA to stop the replication of MDR cells. These results indicated that S-D1@L-D2 NPs was a co-delivery system of intracellular precision release loaded drugs with p

  13. Nanoporous anodic titanium dioxide layers as potential drug delivery systems: Drug release kinetics and mechanism.

    Science.gov (United States)

    Jarosz, Magdalena; Pawlik, Anna; Szuwarzyński, Michał; Jaskuła, Marian; Sulka, Grzegorz D

    2016-07-01

    Nanoporous anodic titanium dioxide (ATO) layers on Ti foil were prepared via a three step anodization process in an electrolyte based on an ethylene glycol solution with fluoride ions. Some of the ATO samples were heat-treated in order to achieve two different crystallographic structures - anatase (400°C) and a mixture of anatase and rutile (600°C). The structural and morphological characterizations of ATO layers were performed using a field emission scanning electron microscope (SEM). The hydrophilicity of ATO layers was determined with contact angle measurements using distilled water. Ibuprofen and gentamicin were loaded effectively inside the ATO nanopores. Afterwards, an in vitro drug release was conducted for 24h under a static and dynamic flow conditions in a phosphate buffer solution at 37°C. The drug concentrations were determined using UV-Vis spectrophotometry. The absorbance of ibuprofen was measured directly at 222nm, whether gentamicin was determined as a complex with silver nanoparticles (Ag NPs) at 394nm. Both compounds exhibited long term release profiles, despite the ATO structure. A new release model, based on the desorption of the drug from the ATO top surface followed by the desorption and diffusion of the drug from the nanopores, was derived. The proposed release model was fitted to the experimental drug release profiles, and kinetic parameters were calculated.

  14. Ferrous iron-dependent drug delivery enables controlled and selective release of therapeutic agents in vivo.

    Science.gov (United States)

    Deu, Edgar; Chen, Ingrid T; Lauterwasser, Erica M W; Valderramos, Juan; Li, Hao; Edgington, Laura E; Renslo, Adam R; Bogyo, Matthew

    2013-11-05

    The precise targeting of cytotoxic agents to specific cell types or cellular compartments is of significant interest in medicine, with particular relevance for infectious diseases and cancer. Here, we describe a method to exploit aberrant levels of mobile ferrous iron (Fe(II)) for selective drug delivery in vivo. This approach makes use of a 1,2,4-trioxolane moiety, which serves as an Fe(II)-sensitive "trigger," making drug release contingent on Fe(II)-promoted trioxolane fragmentation. We demonstrate in vivo validation of this approach with the Plasmodium berghei model of murine malaria. Malaria parasites produce high concentrations of mobile ferrous iron as a consequence of their catabolism of host hemoglobin in the infected erythrocyte. Using activity-based probes, we successfully demonstrate the Fe(II)-dependent and parasite-selective delivery of a potent dipeptidyl aminopeptidase inhibitor. We find that delivery of the compound in its Fe(II)-targeted form leads to more sustained target inhibition with greatly reduced off-target inhibition of mammalian cathepsins. This selective drug delivery translates into improved efficacy and tolerability. These findings demonstrate the utility of a purely chemical means to achieve selective drug targeting in vivo. This approach may find useful application in parasitic infections and more broadly in any disease state characterized by aberrant production of reactive ferrous iron.

  15. Targeted and controlled anticancer drug delivery and release with magnetoelectric nanoparticles

    Science.gov (United States)

    Rodzinski, Alexandra; Guduru, Rakesh; Liang, Ping; Hadjikhani, Ali; Stewart, Tiffanie; Stimphil, Emmanuel; Runowicz, Carolyn; Cote, Richard; Altman, Norman; Datar, Ram; Khizroev, Sakhrat

    2016-02-01

    It is a challenge to eradicate tumor cells while sparing normal cells. We used magnetoelectric nanoparticles (MENs) to control drug delivery and release. The physics is due to electric-field interactions (i) between MENs and a drug and (ii) between drug-loaded MENs and cells. MENs distinguish cancer cells from normal cells through the membrane’s electric properties; cancer cells have a significantly smaller threshold field to induce electroporation. In vitro and in vivo studies (nude mice with SKOV-3 xenografts) showed that (i) drug (paclitaxel (PTX)) could be attached to MENs (30-nm CoFe2O4@BaTiO3 nanostructures) through surface functionalization to avoid its premature release, (ii) drug-loaded MENs could be delivered into cancer cells via application of a d.c. field (~100 Oe), and (iii) the drug could be released off MENs on demand via application of an a.c. field (~50 Oe, 100 Hz). The cell lysate content was measured with scanning probe microscopy and spectrophotometry. MENs and control ferromagnetic and polymer nanoparticles conjugated with HER2-neu antibodies, all loaded with PTX were weekly administrated intravenously. Only the mice treated with PTX-loaded MENs (15/200 μg) in a field for three months were completely cured, as confirmed through infrared imaging and post-euthanasia histology studies via energy-dispersive spectroscopy and immunohistochemistry.

  16. Magnetic glass ceramics for sustained 5-fluorouracil delivery: Characterization and evaluation of drug release kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Hameed, S.A.M., E-mail: Salwa_NRC@hotmail.com [Glass Research Department, National Research Center, Dokki, ElBehoos St., Cairo 12311 (Egypt); El-Kady, A.M. [Biomaterial Department, National Research Center, Dokki, ElBehoos St., Cairo 12311 (Egypt); Marzouk, M.A. [Glass Research Department, National Research Center, Dokki, ElBehoos St., Cairo 12311 (Egypt)

    2014-11-01

    In the present study, magnetic glass ceramics in the system Fe{sub 2}O{sub 3} ∙ TiO{sub 2} ∙ P{sub 2}O{sub 5} ∙ SiO{sub 2} ∙ MO (M = Mg, Ca, Mn, Cu, Zn or Ce) are prepared. The effect of adding different cations on the thermal behavior, developed phases, microstructure and magnetic properties is studied using differental thermal analysis (DTA), X-ray diffraction analysis (XRD), transmission electron microscope (TEM), FT-infrared transmission (FT-IR) and vibrating sample magnetometer (VSM) respectively. The magnetic glass ceramics are tested as delivery systems for 5-fluorouracil. Modeling and analysis of release kinetics are addressed. The application of Higuchi square root of time model and the first order release model indicated that, 5-FU is released by diffusion controlled mechanisms, and that its released rate depends greatly on the concentration of loaded drug during the loading stage. The obtained results suggested that, the prepared magnetic glass ceramics can be used for cancer treatment by hyperthermia and/or by localized delivery of therapeutic doses of 5-fluorouracil. - Highlights: • Preparation of magnetic glass ceramics in the system Fe{sub 2}O{sub 3} ∙ TiO{sub 2} ∙ P{sub 2}O{sub 5} ∙ SiO{sub 2} ∙ MO • The magnetic glass ceramics were tested as delivery systems for 5-fluorouracil. • Drug release profiles follow Higuchi square root of time and first order model.

  17. Effect of ca2+ to salicylic acid release in pectin based controlled drug delivery system

    Science.gov (United States)

    Kistriyani, L.; Wirawan, S. K.; Sediawan, W. B.

    2016-01-01

    Wastes from orange peel are potentially be utilized to produce pectin, which are currently an import commodity. Pectin can be used in making edible film. Edible films are potentially used as a drug delivery system membrane after a tooth extraction. Drug which is used in the drug delivery system is salicylic acid. It is an antiseptic. In order to control the drug release rate, crosslinking process is added in the manufacturing of membrane with CaCl2.2H2O as crosslinker. Pectin was diluted in water and mixed with a plasticizer and CaCl2.2H2O solution at 66°C to make edible film. Then the mixture was dried in an oven at 50 °C. After edible film was formed, it was coated using plasticizer and CaCl2.2H2O solution with various concentration 0, 0.015, 0.03 and 0.05g/mL. This study showed that the more concentration of crosslinker added, the slower release of salicylic acid would be. This was indicated by the value of diffusivites were getting smaller respectively. The addition of crosslinker also caused smaller gels swelling value,which made the membrane is mechanically stronger

  18. Surface Modifications of Titanium Implants by Multilayer Bioactive Coatings with Drug Delivery Potential: Antimicrobial, Biological, and Drug Release Studies

    Science.gov (United States)

    Ordikhani, Farideh; Zustiak, Silviya Petrova; Simchi, Abdolreza

    2016-04-01

    Recent strategies to locally deliver antimicrobial agents to combat implant-associated infections—one of the most common complications in orthopedic surgery—are gaining interest. However, achieving a controlled release profile over a desired time frame remains a challenge. In this study, we present an innovative multifactorial approach to combat infections which comprises a multilayer chitosan/bioactive glass/vancomycin nanocomposite coating with an osteoblastic potential and a drug delivery capacity. The bioactive drug-eluting coating was prepared on the surface of titanium foils by a multistep electrophoretic deposition technique. The adopted deposition strategy allowed for a high antibiotic loading of 1038.4 ± 40.2 µg/cm2. The nanocomposite coating exhibited a suppressed burst release with a prolonged sustained vancomycin release for up to 6 weeks. Importantly, the drug release profile was linear with respect to time, indicating a zero-order release kinetics. An in vitro bactericidal assay against Staphylococcus aureus confirmed that releasing the drug reduced the risk of bacterial infection. Excellent biocompatibility of the developed coating was also demonstrated by in vitro cell studies with a model MG-63 osteoblast cell line.

  19. Novel gastroretentive controlled-release drug delivery system for amoxicillin therapy in veterinary medicine.

    Science.gov (United States)

    Horwitz, E; Kagan, L; Chamisha, Y; Gati, I; Hoffman, A; Friedman, M; Lavy, E

    2011-10-01

    Beta-lactam antimicrobials, commonly used in both veterinary and human medicine, generally present short biologic half-lives, whereas their activity is enhanced as pathogen exposure is prolonged. These properties necessitate multiple-dose regimens of standard dosage forms, thereby hampering pet owner adherence, frequently resulting in therapeutic failure. This study presents a novel controlled-release gastroretentive oral drug delivery system for beta-lactams with which single-dose administration provides an effective antimicrobial course, optimizing pharmacokinetic (PK)-pharmacodynamic (PD) profiles, minimizing adverse effects and emergence of antimicrobial resistance and facilitating adherence. Our prototype sustained-delivery swelling-tablet (SDST), based on a degradable hydrophilic polymeric matrix, was designed to enable continuous input of these drugs to their absorption sites over several days. Several SDST formulations of the beta-lactam amoxicillin were evaluated in in vitro dissolution studies. Two formulations were selected for further in vivo canine studies, for determination of gastric retention and PK-PD profiling. Prolonged gastric retention times maintaining allowed for maintained effective drug concentrations against many clinically relevant pathogens for more than 48 h for one formulation and more than 5 days for the other. Both SDST formulations offer significant advantages over standard immediate-release therapy in achieving PK-PD goals and enhancing adherence. The prototypical formulations represent a novel platform which may be modified to meet various clinical requirements. © 2010 Blackwell Publishing Ltd.

  20. Magnetic glass ceramics for sustained 5-fluorouracil delivery: characterization and evaluation of drug release kinetics.

    Science.gov (United States)

    Abdel-Hameed, S A M; El-Kady, A M; Marzouk, M A

    2014-11-01

    In the present study, magnetic glass ceramics in the system Fe2O3 ∙ TiO2 ∙ P2O5 ∙ SiO2 ∙ MO (M=Mg, Ca, Mn, Cu, Zn or Ce) are prepared. The effect of adding different cations on the thermal behavior, developed phases, microstructure and magnetic properties is studied using differental thermal analysis (DTA), X-ray diffraction analysis (XRD), transmission electron microscope (TEM), FT-infrared transmission (FT-IR) and vibrating sample magnetometer (VSM) respectively. The magnetic glass ceramics are tested as delivery systems for 5-fluorouracil. Modeling and analysis of release kinetics are addressed. The application of Higuchi square root of time model and the first order release model indicated that, 5-FU is released by diffusion controlled mechanisms, and that its released rate depends greatly on the concentration of loaded drug during the loading stage. The obtained results suggested that, the prepared magnetic glass ceramics can be used for cancer treatment by hyperthermia and/or by localized delivery of therapeutic doses of 5-fluorouracil.

  1. Co-delivery nanoparticles with characteristics of intracellular precision release drugs for overcoming multidrug resistance

    Science.gov (United States)

    Zhang, DanDan; Kong, Yan Yan; Sun, Jia Hui; Huo, Shao Jie; Zhou, Min; Gui, Yi Ling; Mu, Xu; Chen, Huan; Yu, Shu Qin; Xu, Qian

    2017-01-01

    Combination chemotherapy in clinical practice has been generally accepted as a feasible strategy for overcoming multidrug resistance (MDR). Here, we designed and successfully prepared a co-delivery system named S-D1@L-D2 NPs, where denoted some smaller nanoparticles (NPs) carrying a drug doxorubicin (DOX) were loaded into a larger NP containing another drug (vincristine [VCR]) via water-in-oil-in-water double-emulsion solvent diffusion-evaporation method. Chitosan-alginate nanoparticles carrying DOX (CS-ALG-DOX NPs) with a smaller diameter of about 20 nm formed S-D1 NPs; vitamin E D-α-tocopheryl polyethylene glycol 1000 succinate-modified poly(lactic-co-glycolic acid) nanoparticles carrying VCR (TPGS-PLGA-VCR NPs) with a larger diameter of about 200 nm constituted L-D2 NPs. Some CS-ALG-DOX NPs loaded into TPGS-PLGA-VCR NPs formed CS-ALG-DOX@TPGS-PLGA-VCR NPs. Under the acidic environment of cytosol and endosome or lysosome in MDR cell, CS-ALG-DOX@TPGS-PLGA-VCR NPs released VCR and CS-ALG-DOX NPs. VCR could arrest cell cycles at metaphase by inhibiting microtubule polymerization in the cytoplasm. After CS-ALG-DOX NPs escaped from endosome, they entered the nucleus through the nuclear pore and released DOX in the intra-nuclear alkaline environment, which interacted with DNA to stop the replication of MDR cells. These results indicated that S-D1@L-D2 NPs was a co-delivery system of intracellular precision release loaded drugs with pH-sensitive characteristics. S-D1@L-D2 NPs could obviously enhance the in vitro cytotoxicity and the in vivo anticancer efficiency of co-delivery drugs, while reducing their adverse effects. Overall, S-D1@L-D2 NPs can be considered an innovative platform for the co-delivery drugs of clinical combination chemotherapy for the treatment of MDR tumor.

  2. Natural gums as sustained release carriers: development of gastroretentive drug delivery system of ziprasidone HCl

    Directory of Open Access Journals (Sweden)

    AJ Rajamma

    2012-10-01

    Full Text Available Abstract Background Objective of this study is to show the potential use of natural gums in the development of drug delivery systems. Therefore in this work gastro retentive tablet formulations of ziprasidone HCl were developed using simplex lattice design considering concentration of okra gum, locust bean gum and HPMC K4M as independent variables. A response surface plot and multiple regression equations were used to evaluate the effect of independent variables on hardness, flag time, floating time and drug release for 1 h, 2 h, and 8 h and for 24 h. A checkpoint batch was also prepared by considering the constraints and desirability of optimized formulation to improve its in vitro performance. Significance of result was analyzed using ANOVA and p was considered statistically significant. Results Formulation chiefly contains locust bean gum found to be favorable for hardness and floatability but combined effect of three variables was responsible for the sustained release of drug. The in vitro drug release data of check point batch (F8 was found to be sustained well compared to the most satisfactory formulation (F7 of 7 runs. The ‘n’ value was found to be between 0.5 and 1 suggesting that release of drug follows anomalous (non-fickian diffusion mechanism indicating both diffusion and erosion mechanism from these natural gums. Predicted results were almost similar to the observed experimental values indicating the accuracy of the design. In vivo floatability test indicated non adherence to the gastric mucosa and tablets remain buoyant for more than 24 h. Conclusions Study showed these eco-friendly natural gums can be considered as promising SR polymers.

  3. Nanoengineered drug-releasing Ti wires as an alternative for local delivery of chemotherapeutics in the brain

    Directory of Open Access Journals (Sweden)

    Gulati K

    2012-04-01

    Full Text Available Karan Gulati1,2, Moom Sinn Aw1, Dusan Losic1,21Ian Wark Research Institute, The University of South Australia, Adelaide, SA, Australia; 2School of Chemical Engineering, The University of Adelaide, Adelaide, SA, AustraliaAbstract: The blood–brain barrier (BBB blocks the passage of active molecules from the blood which makes drug delivery to the brain a challenging problem. Oral drug delivery using chemically modified drugs to enhance their transport properties or remove the blocking of drug transport across the BBB is explored as a common approach to address these problems, but with limited success. Local delivery of drugs directly to the brain interstitium using implants such as polymeric wafers, gels, and catheters has been recognized as a promising alternative particularly for the treatment of brain cancer (glioma and neurodegenerative disorders. The aim of this study was to introduce a new solution by engineering a drug-releasing implant for local drug delivery in the brain, based on titanium (Ti wires with titania nanotube (TNT arrays on their surfaces. Drug loading and drug release characteristics of this system were explored using two drugs commonly used in oral brain therapy: dopamine (DOPA, a neurotransmitter agent; and doxorubicin (DOXO, an anticancer drug. Results showed that TNT/Ti wires could provide a considerable amount of drugs (>170 µg to 1000 µg with desirable release kinetics and controllable release time (1 to several weeks and proved their feasibility for use as drug-releasing implants for local drug delivery in the brain.Purpose: In this report, a new drug-releasing platform in the form of nanoengineered Ti wires with TNT arrays is proposed as an alternative for local delivery of chemotherapeutics in the brain to bypass the BBB. To prove this concept, drug loading and release characteristics of two drugs important for brain therapy (the neurotransmitter DOPA and the anticancer drug DOXO were explored.Methods: Titania

  4. NOVEL pH-SENSITIVE DRUG DELIVERY SYSTEM BASED ON NATURAL POLYSACCHARIDE FOR DOXORUBICIN RELEASE

    Institute of Scientific and Technical Information of China (English)

    Dian-xiang Lu; Xian-tao Wen; Jie Liang; Xing-dong Zhang; Zhong-wei Gu; Yu-jiang Fan

    2008-01-01

    A novel pH-sensitive nanoparticle drug delivery system (DDS) derived from natural polysaccharide pullulan for doxorubicin (DOX) release was prepared. Pullulan was functionalized by successive carboxymethylization and amidation to introduce hydrazide groups. DOX was then grafted onto pullulan backbone through the pH-sensitive hydrazone bond to form a pullulan/DOX conjugate. This conjugate self-assembled to form nano-sized particles in aqueous solution as a result of the hydrophobic interaction of the DOX. Transmission electron microscope (TEM) and dynamic light scattering (DLS)characterization showed that the nanoparticles were spherical and their size was less than 100 nm. The DOX released from the nanoparticles in a pH-sensitive manner. In vitro cytotoxicity assay indicated the pullulan/DOX nanoparticles showed comparable cytotoxicity effect with free DOX on the 4T1 mouse breast cancer cells.

  5. Convertible MRI contrast: Sensing the delivery and release of anti-glioma nano-drugs

    Science.gov (United States)

    Zhang, Liang; Zhang, Zhongwei; Mason, Ralph P.; Sarkaria, Jann N.; Zhao, Dawen

    2015-05-01

    There is considerable interest in developing nanohybrids of imaging contrast agents and drugs for image-guided drug delivery. We have developed a strategy of utilizing manganese (Mn) to enhance the nano-encapsulation of arsenic trioxide (ATO). Formation of arsenite (As3+)-Mn precipitates in liposomes generates magnetic susceptibility effects, reflected as dark contrast on T2-weighted MRI. Intriguingly, following cell uptake, the As-Mn complex decomposes in response to low pH in endosome-lysosome releasing ionic As3+, the active form of ATO, and Mn2+, the T1 contrast agent that gives a bright signal. Glioblastoma (GBM) is well known for its high resistance to chemotherapy, e.g., temozolomide (TMZ). Building upon the previously established phosphatidylserine (PS)-targeted nanoplatform that has excellent GBM-targeting specificity, we now demonstrate the effectiveness of the targeted nanoformulated ATO for treating TMZ-resistant GBM cells and the ability of the convertible Mn contrast as a surrogate revealing the delivery and release of ATO.

  6. Formulating nanoparticles by flash nanoprecipitation for drug delivery and sustained release

    Science.gov (United States)

    Liu, Ying

    This dissertation provides a fundamental understanding of the process for generating nanoparticles with controlled size distribution and of predicting nanoparticle stability for drug delivery and sustained release. We developed and characterized a novel technology to generate organic and inorganic nanoparticles protected by biocompatible and biodegradable polymers with precisely controlled size and size distribution. Computational fluid mechanics (CFD) together with experimental results provided details of the micromixing in the mixer. The particle size dependence on Reynolds number and supersaturation was illustrated. The study of the fundamental mass transfer phenomena leading to Ostwald ripening enables quantitative prediction of the time evolution of nanoparticles with monodistribution and relatively broader multi-distribution using beta-carotene and polystyrene-b-poly(ethylene oxide) (PS-b-PEO) as a model system. Negatively charged latex particles were used to exam the attachment of the diblock copolymer, PS-b-PEO, on the surface. The stability provided by the Columbic repulsion was replaced by steric stabilization. The attachment of the block copolymers on the surface of the colloids depends on the flow field, i.e. Reynolds number, of the mixing process. The slow degradation of poly(epsilon-caprolactone) (PCL) and poly(gamma-methyl-epsilon-caprolactone) (PMCL) was demonstrated. The slow degradation ensures long-term stability and long-term blood circulation of the polymeric nanoparticles. As a practical application, we formulate the anti-tuberculosis drug, rifampicin, into nanoparticles by conjugation to other hydrophobic molecules (such as vitamin E, PCL and 2-ethylhexyl vinyl ether) by pH sensitive cleavable chemical bonds to increase the drug loading, return stability of the nanoparticle suspension, and control drug release. The in vitro release profiles were provided by using HPLC and E.coli growth inhibition on LB agar plates. The prodrug nanoparticle

  7. In vitro drug release studies on guar gum-based colon targeted oral drug delivery systems of 5-fluorouracil.

    Science.gov (United States)

    Krishnaiah, Y S R; Satyanarayana, V; Dinesh Kumar, B; Karthikeyan, R S

    2002-08-01

    Intravenous administration of 5-fluorouracil for colon cancer therapy produces severe systemic side-effects due to its cytotoxic effect on normal cells. The broad objective of the present study was to develop novel tablet formulations for site-specific delivery of 5-fluorouracil to the colon without the drug being released in the stomach or small intestine using guar gum as a carrier. Fast-disintegrating 5-fluorouracil core tablets were compression coated with 60% (FHV-60), 70% (FHV-70) and 80% (FHV-80) of guar gum, and were subjected to in vitro drug release studies. The amount of 5-fluorouracil released from the compression-coated tablets in the dissolution medium at different time intervals was estimated by a HPLC method. Guar gum compression-coated tablets released only 2.5-4% of the 5-fluorouracil in simulated GI fluids. When the dissolution study was continued in simulated colonic fluids (4% w/v rat caecal content medium) the compression-coated FHV-60, FHV-70 and FHV-80 tablets released another 70, 55 and 41% of the 5-fluorouracil respectively. The results of the study show that compression-coated tablets containing 80% (FHV-80) of guar gum are most likely to provide targeting of 5-fluorouracil for local action in the colon, since they released only 2.38% of the drug in the physiological environment of the stomach and small intestine. The FHV-80 formulation showed no change either in physical appearance, drug content or dissolution pattern after storage at 40 degrees C/RH 75% for 6 months. The differential scanning calorimetric study showed that 5-fluorouracil did not interact with the formulation excipients used in the study.

  8. Recent Advances in Stimuli-Responsive Release Function Drug Delivery Systems for Tumor Treatment

    Directory of Open Access Journals (Sweden)

    Chendi Ding

    2016-12-01

    Full Text Available Benefiting from the development of nanotechnology, drug delivery systems (DDSs with stimuli-responsive controlled release function show great potential in clinical anti-tumor applications. By using a DDS, the harsh side effects of traditional anti-cancer drug treatments and damage to normal tissues and organs can be avoided to the greatest extent. An ideal DDS must firstly meet bio-safety standards and secondarily the efficiency-related demands of a large drug payload and controlled release function. This review highlights recent research progress on DDSs with stimuli-responsive characteristics. The first section briefly reviews the nanoscale scaffolds of DDSs, including mesoporous nanoparticles, polymers, metal-organic frameworks (MOFs, quantum dots (QDs and carbon nanotubes (CNTs. The second section presents the main types of stimuli-responsive mechanisms and classifies these into two categories: intrinsic (pH, redox state, biomolecules and extrinsic (temperature, light irradiation, magnetic field and ultrasound ones. Clinical applications of DDS, future challenges and perspectives are also mentioned.

  9. Controlled adsorption and release onto calcium phosphates materials and drug delivery applications

    Directory of Open Access Journals (Sweden)

    Barroug A.

    2013-11-01

    Full Text Available The adsorptive properties of synthetic calcium phosphates analogous to bone mineral were examined with respect to cisplatin and risedronate, two biological active drugs; the uptake and release experiments were carried out under various conditions in order to understand the basic mechanism of interaction. The effect of temperature and solution composition were highlighted and discussed. The adsorption results obtained for the therapeutic agents demonstrated that, depending on the conditions investigated (nature of the sorbent, concentration range, ionic composition, temperature…, the shape of the isotherms is of Freundlich or Langmuir type. The adsorption is described as an ion-exchange process in dilute solutions, while the interaction appears to be reactive for concentrated solutions (dissolution of mineral ions from the apatite substrate and formation of soluble calcium complex and/or precipitation of calcium salts involving sorbate molecules. The information gained on the surface reactivity of calcium phosphate were exploited to associate an antibiotic to calcium phosphate cements for drug delivery applications. The specimens were obtained by combination of calcium phosphate and calcium carbonate powders upon mixing with water. The physicochemical properties of the paste were altered by the drug loading method (in the liquid or solid phase. Thus, a dose-dependent effect was noticed for the paste setting time, hardening and the release process.

  10. Materials for Pharmaceutical Dosage Forms: Molecular Pharmaceutics and Controlled Release Drug Delivery Aspects

    Directory of Open Access Journals (Sweden)

    Patrick P. DeLuca

    2010-09-01

    Full Text Available Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development.

  11. Mechanism-Based Tumor-Targeting Drug Delivery System. Validation of Efficient Vitamin Receptor-Mediated Endocytosis and Drug Release

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S.; Wong, S.; Zhao, X.; Chen, J.; Chen, J.; Kuznetsova, L.; Ojima, I.

    2010-05-01

    An efficient mechanism-based tumor-targeting drug delivery system, based on tumor-specific vitamin-receptor mediated endocytosis, has been developed. The tumor-targeting drug delivery system is a conjugate of a tumor-targeting molecule (biotin: vitamin H or vitamin B-7), a mechanism-based self-immolative linker and a second-generation taxoid (SB-T-1214) as the cytotoxic agent. This conjugate (1) is designed to be (i) specific to the vitamin receptors overexpressed on tumor cell surface and (ii) internalized efficiently through receptor-mediated endocytosis, followed by smooth drug release via glutathione-triggered self-immolation of the linker. In order to monitor and validate the sequence of events hypothesized, i.e., receptor-mediated endocytosis of the conjugate, drug release, and drug-binding to the target protein (microtubules), three fluorescent/fluorogenic molecular probes (2, 3, and 4) were designed and synthesized. The actual occurrence of these processes was unambiguously confirmed by means of confocal fluorescence microscopy (CFM) and flow cytometry using L1210FR leukemia cells, overexpressing biotin receptors. The molecular probe 4, bearing the taxoid linked to fluorescein, was also used to examine the cell specificity (i.e., efficacy of receptor-based cell targeting) for three cell lines, L1210FR (biotin receptors overexpressed), L1210 (biotin receptors not overexpressed), and WI38 (normal human lung fibroblast, biotin receptor negative). As anticipated, the molecular probe 4 exhibited high specificity only to L1210FR. To confirm the direct correlation between the cell-specific drug delivery and anticancer activity of the probe 4, its cytotoxicity against these three cell lines was also examined. The results clearly showed a good correlation between the two methods. In the same manner, excellent cell-specific cytotoxicity of the conjugate 1 (without fluorescein attachment to the taxoid) against the same three cell lines was confirmed. This mechanism

  12. 5-Fluorouracil Encapsulated Chitosan Nanoparticles for pH-Stimulated Drug Delivery: Evaluation of Controlled Release Kinetics

    Directory of Open Access Journals (Sweden)

    R. Seda Tığlı Aydın

    2012-01-01

    Full Text Available Nanoparticles consisting of human therapeutic drugs are suggested as a promising strategy for targeted and localized drug delivery to tumor cells. In this study, 5-fluorouracil (5-FU encapsulated chitosan nanoparticles were prepared in order to investigate potentials of localized drug delivery for tumor environment due to pH sensitivity of chitosan nanoparticles. Optimization of chitosan and 5-FU encapsulated nanoparticles production revealed 148.8±1.1 nm and 243.1±17.9 nm particle size diameters with narrow size distributions, which are confirmed by scanning electron microscope (SEM images. The challenge was to investigate drug delivery of 5-FU encapsulated chitosan nanoparticles due to varied pH changes. To achieve this objective, pH sensitivity of prepared chitosan nanoparticle was evaluated and results showed a significant swelling response for pH 5 with particle diameter of ∼450 nm. In vitro release studies indicated a controlled and sustained release of 5-FU from chitosan nanoparticles with the release amounts of 29.1–60.8% due to varied pH environments after 408 h of the incubation period. pH sensitivity is confirmed by mathematical modeling of release kinetics since chitosan nanoparticles showed stimuli-induced release. Results suggested that 5-FU encapsulated chitosan nanoparticles can be launched as pH-responsive smart drug delivery agents for possible applications of cancer treatments.

  13. Studies on pectins as potential hydrogel matrices for controlled-release drug delivery.

    Science.gov (United States)

    Sungthongjeen, S; Pitaksuteepong, T; Somsiri, A; Sriamornsak, P

    1999-12-01

    Polymeric hydrogels are widely used as controlled-release matrix tablets. In the present study, we investigated high-methoxy pectins for their potential value in controlled-release matrix formulations. The effects of compression force, ratio of drug to pectin, and type of pectin on drug release from matrix tablets were also investigated. The results of the in vitro release studies show that the drug release from compressed matrix tablets prepared from pectin can be modified by changing the amount and the type of pectin in the matrix tablets. However, compression force did not significantly affect the drug release. The mechanisms controlling release rate were discussed with respect to drug diffusion through the polymer matrices, but may be more complex.

  14. Drug Delivery Using Oral Vehicles: Controlled Release in the GI-tract

    OpenAIRE

    Sæther, Maren

    2012-01-01

    Oral delivery is considered a convenient route for administration of pharmaceuticals. Great effort has been made to optimize oral delivery vehicles to increase the bioavailability of the pharmaceutical, and enhance patient compliance to ease swallowing. Emulsion-based gelled matrices have shown promising features as delivery systems. They are soft chewable matrices that are easy to swallow, and have the ability to entrap the pharmaceutical, providing prolonged, and controlled release to avoid...

  15. CONTROLLED DRUG DELIVERY THROUGH MICROENCAPSULATION

    Directory of Open Access Journals (Sweden)

    NIKHIL K. SACHAN

    2006-01-01

    Full Text Available An appropriately designed controlled release drug delivery system can be a major advance towards solving problems concerning to the targeting of drug to a specific organ or tissue and controlling the rate of drug delivery to the target site. The development of oral controlled release systems has been a challenge to formulation scientist due to their inability to restrain and localize the system at targeted areas of gastrointestinal tract. Microparticulate drug delivery systems are an interesting and promising option when developing an oral controlled release system. The objective of this paper is to take a closer look at microparticles as drug delivery devices for increasing efficiency of drug delivery, improving the release profile and drug targeting. In order to appreciate the application possibilities of microcapsules in drug delivery, some fundamental aspects are briefly reviewed.

  16. Effect of co-administration of probiotics with polysaccharide based colon targeted delivery systems to optimize site specific drug release.

    Science.gov (United States)

    Prudhviraj, G; Vaidya, Yogyata; Singh, Sachin Kumar; Yadav, Ankit Kumar; Kaur, Puneet; Gulati, Monica; Gowthamarajan, K

    2015-11-01

    Significant clinical success of colon targeted dosage forms has been limited by their inappropriate release profile at the target site. Their failure to release the drug completely in the colon may be attributed to changes in the colonic milieu because of pathological state, drug effect and psychological stress accompanying the diseased state or, a combination of these. Alteration in normal colonic pH and bacterial picture leads to incomplete release of drug from the designed delivery system. We report the effectiveness of a targeted delivery system wherein the constant replenishment of the colonic microbiota is achieved by concomitant administration of probiotics along with the polysaccharide based drug delivery system. Guar gum coated spheroids of sulfasalazine were prepared. In the dissolution studies, these spheroids showed markedly higher release in the simulated colonic fluid. In vivo experiments conducted in rats clearly demonstrated the therapeutic advantage of co-administration of probiotics with guar gum coated spheroids. Our results suggest that concomitant use of probiotics along with the polysaccharide based delivery systems can be a simple strategy to achieve satisfactory colon targeting of drugs.

  17. Evaluation of drug delivery profiles in geometric three-layered tablets with various mechanical properties, in vitro-in vivo drug release, and Raman imaging.

    Science.gov (United States)

    Choi, Du Hyung; Kim, Ki Hyun; Park, Jun Sang; Jeong, Seong Hoon; Park, Kinam

    2013-12-28

    Even though various multi-layered tablets have been developed for sustained release formulations, evaluations of mechanical properties during dissolution with drug release and imaging in the tablets have been limited. A novel geometric system consisting of an inner immediate release layer and two extended release barrier layers with swellable hydrophilic polymers was suggested as a once-a-day formulation. To evaluate drug release mechanisms with geometric properties, various mechanical characteristics during swelling were investigated to comprehend the relationship among in vitro drug release, human pharmacokinetics, and geometric characteristics. Imaging of drug movement was also studied in real-time using Raman spectroscopy. Drug delivery in the tablets might be divided into three processes through the geometric properties. When exposed to aqueous environments, the drug in the mid-layer was released until wrapped by the swollen barrier layers. Then, the drug in the mid-layer was mainly delivered to the barrier layers and a small amount of the drug was delivered to the contact region of the swollen barrier layers. Finally, the delivered drug to the barrier layers was consistently released out in response to the characteristics of the polymer of the barrier layers. Using Raman spectroscopy, these processes were confirmed in real-time analysis. Moreover, in vitro drug release profiles and human pharmacokinetics showed consistent results suggesting that drug release might be dependent on the various geometric properties and be modified consistently during the formulation development. © 2013.

  18. CONTROLLED RELEASE IN SITU FORMING GATIFLOXACIN HCl HYDROGEL FOR OPHTHALMIC DRUG DELIVERY

    OpenAIRE

    Pawar Sagar D; Pawar Ravi.G.; Gadhave M. V.; Jadhav S.L.; Gaikwad D. D.

    2012-01-01

    Recently, controlled drug delivery has become the standard in modern Pharmaceutical design and an intensive research have been undertaken in achieving much better drug product effectiveness, reliability and safety. This interest has been sparked by the advantages shown by in situ forming polymeric delivery systems such as ease of administration and reduced frequency of administration, improved patient compliance and comfort. In situ hydrogels are instilled as drops into the eye and undergoes...

  19. Preparation and In Vitro Release of Drug-Loaded Microparticles for Oral Delivery Using Wholegrain Sorghum Kafirin Protein

    Directory of Open Access Journals (Sweden)

    Esther T. L. Lau

    2015-01-01

    Full Text Available Kafirin microparticles have been proposed as an oral nutraceutical and drug delivery system. This study investigates microparticles formed with kafirin extracted from white and raw versus cooked red sorghum grains as an oral delivery system. Targeted delivery to the colon would be beneficial for medication such as prednisolone, which is used in the management of inflammatory bowel disease. Therefore, prednisolone was loaded into microparticles of kafirin from the different sources using phase separation. Differences were observed in the protein content, in vitro protein digestibility, and protein electrophoretic profile of the various sources of sorghum grains, kafirin extracts, and kafirin microparticles. For all of the formulations, the majority of the loaded prednisolone was not released in in vitro conditions simulating the upper gastrointestinal tract, indicating that most of the encapsulated drug could reach the target area of the lower gastrointestinal tract. This suggests that these kafirin microparticles may have potential as a colon-targeted nutraceutical and drug delivery system.

  20. Preparation and in vitro evaluation of sustained release drug delivery system for verapamil HCL

    Directory of Open Access Journals (Sweden)

    Bhalekar M

    2007-01-01

    Full Text Available Verapamil HCl is a calcium channel blocker administered on thrice a day dosage regimen. In the present study resinates of verapamil HCl were formulated using Indion resins. Drug loading process was optimized with respect to drug:resin ratio, pH of loading solution, and particle size of resin. Resinates were characterized using XRPD. In vitro drug release rates from resinate was not adequately sustained. Hence resinates were incorporated in pellets using extrusion spheronization to achieve desired release pattern. Optimum drug loading was seen at pH of 3.5 in drug resin ratio of 1:1 and was seen to increase with temperature. XRPD studies revealed verapamil to be present in amorphous form in resinates. Drug release from resinates was complete in four hours. Resinates were pelletized using hydroxypropylmethylcellulose. Resinate of Indion 254 with 5% hydroxypropylmethylcellulose fulfilled USP criteria for extended release verapamil preparation.

  1. STOMACH-SPECIFIC MUCOADHESIVE NANOPARTICLES AS A CONTROLLED RELEASE DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    SINGHAI AKHLESH KUMAR

    2013-01-01

    Full Text Available In recent years scientific and technological advancement have been made in the rate controlled oral drug delivery system by overcoming physiological adversities, such as short gastric residence time (GRT and unpredictable gastric emptying time (GET. So an interest increased towards novel dosage forms, that can retained in the stomach for a prolonged and predictable period of time. The concept of such novel dosage forms is to decrease the GI transit rate of the drug delivery system by attachment to the mucus layer, thereby increasing the overall time for drug absorption. A further advantage of such delivery systems is that the drug no longer must diffuse through the luminal contents in order to reach the mucosal epithelium. Various polymers have been used in the formulation of stomach specific mucoadhesive nanoparticles for drug delivery to increase therapeutic benefit, while minimizing side effects. Here we have discussed about concept of gastric emptying, absorption window, potential drug candidates, technological development evaluation and applications for stomach-specific mucoadhesive nanoparticles. Marketed products for oral nanoparticulate drug delivery systems are also discussed in this review.

  2. Aggregation of gold nanoparticles followed by methotrexate release enables Raman imaging of drug delivery into cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Durgadas, C. V.; Sharma, C. P.; Paul, W.; Rekha, M. R. [Sree Chitra Tirunal Institute for Medical Sciences and Technology, Biosurface Technology Division (India); Sreenivasan, K., E-mail: sreeni@sctimst.ac.in [Sree Chitra Tirunal Institute for Medical Sciences and Technology, Laboratory for Polymer Analysis, Biomedical Technology Wing (India)

    2012-09-15

    This study refers an aqueous synthesis of methotrexate (MTX)-conjugated gold nanoparticles (GNPs), their interaction with HepG2 cells, and the use of Raman imaging to observe cellular internalization and drug delivery. GNPs of average size 3.5-5 nm were stabilized using the amine terminated bifunctional biocompatible copolymer and amended by conjugating MTX, an anticancer drug. The nanoparticles were released MTX at a faster rate in acidic pH and subsequently found to form aggregates. The Raman signals of cellular components were found to be enhanced by the aggregated particles enabling the mapping to visualize site-specific drug delivery. The methodology seems to have potential in optimizing the characteristics of nanodrug carriers for emptying the cargo precisely at specified sites.Graphical AbstractDrug release induced particle aggregation enhances Raman signals to aid in imaging.

  3. In vitro efficacy and release study with anti-inflammatory drugs incorporated in adhesive transdermal drug delivery systems.

    Science.gov (United States)

    Meyer, Stefanie; Peters, Nils; Mann, Tobias; Wolber, Rainer; Pörtner, Ralf; Nierle, Jens

    2014-04-01

    The topical application of two different anti-inflammatory extracts incorporated in adhesive transdermal drug delivery systems (TDDSs) was investigated. Therefore, anti-inflammatory properties and percutaneous absorption behavior of adhesive TDDSs were characterized in vitro conducting experiments with a dermatologically relevant human skin model. Anti-inflammatory efficacy against UV irradiation of both TDDSs was determined in vitro with EpiDerm™. The reduction of the release of proinflammatory cytokines by topically applied TDDSs was compared with the reduction during the presence of the specific cyclooxygenase inhibitor diclofenac in the culture medium. A similar anti-inflammatory efficacy of the topically applied TDDSs in comparison with the use of diclofenac in the culture medium should be achieved. Furthermore, percutaneous absorption in efficacy tests was compared with percutaneous absorption in diffusion studies with porcine cadaver skin. Both the topically applied TDDSs showed a significant anti-inflammatory activity. Permeation coefficients through the stratum corneum and the epidermis gained from the release studies on porcine cadaver skin (Magnolia: 2.23·10(-5) cm/h, licorice: 4.68·10(-6) cm/h) were approximately five times lower than the permeation coefficients obtained with the EpiDerm™ skin model (Magnolia: 9.48·10(-5) cm/h, licorice: 24.0·10(-6) cm/h). Therefore, an adjustment of drug doses during experiments with the EpiDerm™ skin model because of weaker skin barrier properties should be considered.

  4. Aptamer/Graphene Quantum Dots Nanocomposite Capped Fluorescent Mesoporous Silica Nanoparticles for Intracellular Drug Delivery and Real-Time Monitoring of Drug Release.

    Science.gov (United States)

    Zheng, Fen-Fen; Zhang, Peng-Hui; Xi, Yu; Chen, Jing-Jia; Li, Ling-Ling; Zhu, Jun-Jie

    2015-12-01

    Great challenges in investigating the release of drug in complex cellular microenvironments necessitate the development of stimuli-responsive drug delivery systems with real-time monitoring capability. In this work, a smart drug nanocarrier based on fluorescence resonance energy transfer (FRET) is fabricated by capping graphene quantum dots (GQDs, the acceptor) onto fluorescent mesoporous silica nanoparticles (FMSNs, the donor) via ATP aptamer for real-time monitoring of ATP-triggered drug release. Under extracellular conditions, the fluorescence of FMSNs remains in the "off" state in the low ATP level which is unable to trigger the release of drug. Once specifically recognized and internalized into the target tumor cells by AS1411 aptamer, in the ATP-rich cytoplasm, the conformation switch of the ATP aptamer causes the shedding of the GQDs from the nanocarriers, leading to the release of the loaded drugs and consequently severe cytotoxicity. Simultaneously, the fluorescence of FMSNs turns "on" along with the dissociation of GQDs, which allows real-time monitoring of the release of drug from the pores. Such a drug delivery system features high specificity of dual-target recognition with AS1411 and ATP aptamer as well as high sensitivity of the FRET-based monitoring strategy. Thus, the proposed multifunctional ATP triggered FRET-nanocarriers will find potential applications for versatile drug-release monitoring, efficient drug transport, and targeted cancer therapeutics.

  5. A novel nested liposome drug delivery vehicle capable of ultrasound triggered release of its payload.

    Science.gov (United States)

    Ibsen, Stuart; Benchimol, Michael; Simberg, Dmitri; Schutt, Carolyn; Steiner, Jason; Esener, Sadik

    2011-11-01

    The use of focused ultrasound can be an effective method to locally highlight tumor tissue and specifically trigger the activation of echogenic drug delivery vehicles in an effort to reduce systemic chemotherapy side effects. Here we demonstrate a unique ultrasound triggered vehicle design and fabrication method where the payload and a perfluorocarbon gas microbubble are both encapsulated within the internal aqueous space of a liposome. This nested lipid shell geometry both stabilized the microbubble and ensured it was spatially close enough to interact with the liposome membrane at all times. The internal microbubble was shown to fragment the outer liposome membrane upon exposure to ultrasound at intensities of 1-1.5MPa. The focused ultrasound allowed the release of the internal payload to localized regions within tissue phantoms. The vehicles showed high payload loading efficiency of 16%, stability in blood of several hours, and low level macrophage recognition in vitro. High speed fluorescent videos present the first optical images of such vehicles interacting with ultrasound. This ability to open the outer membrane in small regions of deep tissue could provide a second level of spatial and temporal control beyond biochemical targeting, making these particles promising for in vivo animal studies.

  6. A novel and alternative approach to controlled release drug delivery system based on solid dispersion technique

    Directory of Open Access Journals (Sweden)

    Tapan Kumar Giri

    2012-12-01

    Full Text Available The solid dispersion method was originally used to improve the dissolution properties and the bioavailability of poorly water soluble drugs by dispersing them into water soluble carriers. In addition to the above, dissolution retardation through solid dispersion technique using water insoluble and water swellable polymer for the development of controlled release dosage forms has become a field of interest in recent years. Development of controlled release solid dispersion has a great advantage for bypassing the risk of a burst release of drug; since the structure of the solid dispersion is monolithic where drug molecules homogeneously disperse. Despite the remarkable potential and extensive research being conducted on controlled release solid dispersion system, commercialization and large scale production are limited. The author expects that recent technological advances may overcome the existing limitations and facilitate the commercial utilization of the techniques for manufacture of controlled release solid dispersions. This article begins with an overview of the different carriers being used for the preparation of controlled release solid dispersion and also different techniques being used for the purpose. Kinetics of drug release from these controlled release solid dispersions and the relevant mathematical modeling have also been reviewed in this manuscript.

  7. Formulation and evaluation of dorzolamide hydrochloride-loaded nanoparticles as controlled release drug delivery system

    Directory of Open Access Journals (Sweden)

    Azza A Hasan

    2012-01-01

    Full Text Available This study aimed to prepare anti-glaucomatous dorzolamide hydrochloride-(Dorzo loaded nanoparticles as a controlled release system. Eudragit RS 100 (RS and/or RL 100 (RL were used in formulations by an opportunely adapted Quasi-emulsion solvent diffusion technique. The formulations were evaluated in terms of particle size, zeta potential, drug entrapment, and release profile. All formulations showed tiny particle size varying from 114 to 395 nm for RS and 65 to 277 nm for RL. Positive zeta potential was +19 to +32 mV for RS and +23 to +42 mV for RL formulations. It was demonstrated that increasing polymer concentration lead to increase the percentage of drug entrapped in all batches, to a certain extent (drug: polymer 1:4. Nanoparticles prepared using RL showed lower entrapment efficiency than RS. In contrast, increasing the stirring rate resulted in an increase in the percentage of Dorzo entrapped. A prolonged drug release was shown by all the formulations. Increasing the polymer concentration caused a decrease in the release rate. Moreover, it was evident that increasing RL content increased the amount of Dorzo released. Dorzo-loaded nanoparticles could represent promising drug ophthalmic carriers, due to small particle size, positive zeta potential, and sustained release profile; hence, expecting prolonged corneal contact time, more therapeutically efficient, decreased frequency of administration per day, and better patient compliance.

  8. Development of sustained release floating drug delivery system for norfloxacin: in vitro and in vivo evaluation.

    Science.gov (United States)

    Guguloth, Mohan; Bomma, Ramesh; Veerabrahma, Kishan

    2011-01-01

    gastroretentive drug delivery systems. Gastroretentive floating tablets of norfloxcin were developed by employing three different polymers, which prolonged the drug release from the dosage forms. Tablet floatation was achieved by an effervescent mechanism. Citric acid at different concentrations was used in formulations to provide an acidic microenvironment. The prepared tablets were characterized for hardness, weight variation, thickness, friability, floating lag time, and dissolution. Around 12 tablet formulations were prepared as a continuation of the previous work. The best formulation (F4c) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent. The tablets remained in the stomach for about 205 ± 8.4 min. Bioavailability studies were conducted in healthy male human volunteers, and the pharmacokinetic parameters of the best formulation were compared with that of the marketed conventional (Norbid) tablet. The increased bioavailability of the developed formulation was found to be 16.27%.

  9. Chitosan-functionalised poly(2-hydroxyethyl methacrylate) core-shell microgels as drug delivery carriers: salicylic acid loading and release.

    Science.gov (United States)

    Mahattanadul, Natshisa; Sunintaboon, Panya; Sirithip, Piyawan; Tuchinda, Patoomratana

    2016-09-01

    This work presents the evaluation of chitosan-functionalised poly(2-hydroxyethyl methacrylate) (CS/PHEMA) core-shell microgels as drug delivery carriers. CS/PHEMA microgels were prepared by emulsifier-free emulsion polymerisation with N,N '-methylenebisacrylamide (MBA) as a crosslinker. The study on drug loading, using salicylic acid (SA) as a model drug, was performed. The results showed that the encapsulation efficiency (EE) increased as drug-to-microgel ratio was increased. Higher EE can be achieved with the increase in degree of crosslinking, by increasing the amount of MBA from 0.01 g to 0.03 g. In addition, the highest EE (61.1%) was observed at pH 3. The highest release of SA (60%) was noticed at pH 2.4, while the lowest one (49.4%) was obtained at pH 7.4. Moreover, the highest release of SA was enhanced by the presence of 0.2 M NaCl. The pH- and ionic-sensitivity of CS/PHEMA could be useful as a sustained release delivery device, especially for oral delivery.

  10. Sustained Release and Cytotoxicity Evaluation of Carbon Nanotube-Mediated Drug Delivery System for Betulinic Acid

    Directory of Open Access Journals (Sweden)

    Julia M. Tan

    2014-01-01

    Full Text Available Carbon nanotubes (CNTs have been widely utilized as a novel drug carrier with promising future applications in biomedical therapies due to their distinct characteristics. In the present work, carboxylic acid-functionalized single-walled carbon nanotubes (f-SWCNTs were used as the starting material to react with anticancer drug, BA to produce f-SWCNTs-BA conjugate via π-π stacking interaction. The conjugate was extensively characterized for drug loading capacity, physicochemical properties, surface morphology, drug releasing characteristics, and cytotoxicity evaluation. The results indicated that the drug loading capacity was determined to be around 20 wt% and this value has been verified by thermogravimetric analysis. The binding of BA onto the surface of f-SWCNTs was confirmed by FTIR and Raman spectroscopies. Powder XRD analysis showed that the structure of the conjugate was unaffected by the loading of BA. The developed conjugate was found to release the drug in a controlled manner with a prolonged release property. According to the preliminary in vitro cytotoxicity studies, the conjugate was not toxic in a standard fibroblast cell line, and anticancer activity was significantly higher in A549 than HepG2 cell line. This study suggests that f-SWCNTs could be developed as an efficient drug carrier to conjugate drugs for pharmaceutical applications in cancer chemotherapies.

  11. TiO2 nanotubes as animal drug delivery system and in vitro controlled release.

    Science.gov (United States)

    Lai, Shuting; Zhang, Wei; Liu, Fang; Wu, Cui; Zeng, Dongping; Sun, Yongxue; Xu, Yuehua; Fang, Yueping; Zhou, Wuyi

    2013-01-01

    The enrofloxacin hydrochloride (Enro), an anti-inflammatory drug for the animals, was loaded on the TNTs through physical absorption due to the high specific surface area and excellent surface activity of the TiO2 nanotubes. The samples were characterized by XRD, BET, TEM, TG and FTIR. The in vitro controlled release behavior at different temperatures was studied in detail. The results showed that the obtained TNTs were uniform and mainly amorphous crystal phase with a diameter of 10-15 nm and a length of 350-400 nm. By investigating the effect of the hydrothermal reaction process of the obtained TiO2 nanotubes and the drug loading frequency on the loading content of Enro drugs, the results indicated that the increasing loading frequency of the drug was available for the drug loading and the maximum loading content of drug reached to 33.28%. Enro-TNTs performed a better release profile at low temperature than at high temperature in PBS solution. The Higuchi square root models are suitable to explain the in vitro drug release behavior of Enro from Enro-TNTs.

  12. In vitro controlled release of vitamin C from Ca/Al layered double hydroxide drug delivery system.

    Science.gov (United States)

    Gao, Xiaorui; Chen, Le; Xie, Juan; Yin, Yaobing; Chang, Tao; Duan, Yancong; Jiang, Nan

    2014-06-01

    A new drug delivery system for vitamin C (VC), Ca/Al layered double hydroxide (LDH), is demonstrated in this work. VC anions were intercalated successfully in the Ca/Al LDH gallery by a coprecipitation method. The interlayer space of 9.8Å suggests that VC anions are vertical to the LDH layers in the form of interdigitated bilayer. The loading of VC in LDH is 36.4wt.%. The thermal stability of VC is significantly enhanced after intercalation. In vitro VC release results show that the release time of VC in a phosphate buffer at pH7.4 was significantly extended, and the maximal percentage of VC released is 80% of the total. The Avrami-Erofe'ev equation most satisfactorily explains the release kinetics of VC, which is that the release of VC is mainly dominated by the ion-exchange reaction.

  13. pH- and thermo-responsive microcontainers as potential drug delivery systems: Morphological characteristic, release and cytotoxicity studies

    Energy Technology Data Exchange (ETDEWEB)

    Efthimiadou, Eleni K., E-mail: elefth@chem.demokritos.gr [Sol–Gel Laboratory, Institute for Advanced Materials, Physicochemical Processes, Nanotechnology and Microsystems, NCSR “Demokritos”, 15 341 Aghia Paraskevi Attikis (Greece); Tapeinos, Christos [Sol–Gel Laboratory, Institute for Advanced Materials, Physicochemical Processes, Nanotechnology and Microsystems, NCSR “Demokritos”, 15 341 Aghia Paraskevi Attikis (Greece); Materials Science Department, School of Natural Sciences, University of Patras, 26 500 Patras (Greece); Tziveleka, Leto-Aikaterini; Boukos, Nikos [Sol–Gel Laboratory, Institute for Advanced Materials, Physicochemical Processes, Nanotechnology and Microsystems, NCSR “Demokritos”, 15 341 Aghia Paraskevi Attikis (Greece); Kordas, George, E-mail: gkordas@ims.demokritos.gr [Sol–Gel Laboratory, Institute for Advanced Materials, Physicochemical Processes, Nanotechnology and Microsystems, NCSR “Demokritos”, 15 341 Aghia Paraskevi Attikis (Greece)

    2014-04-01

    Polymeric pH- and thermo-sensitive microcontainers (MCs) were developed as a potential drug delivery system for cancer therapy. It is well known that cancer cells exhibit notable characteristics such as acidic pH due to glycolytic cycle and higher temperature due to their higher proliferation rate. Based on these characteristics, we constructed a dual pH- and thermo-sensitive material for specific drug release on the pathological tissue. The MC's fabrication is based on a two-step procedure, in which, the first step involves the core synthesis and the second one is related to the shell formation. The core consists of poly(methyl methacrylate (PMMA), while the shell consists of PMMA, poly(isopropylacrylamide), poly(acrylic acid) and poly(divinylbenzene). Three different types of MCs were synthesized based on the seed polymerization method. The synthesized MCs were characterized structurally by Fourier transform infrared and morphologically by scanning electron microscopy. Dynamic light scattering was also used to study their behavior in aqueous solution under different pH and temperature conditions. For the loading and release study, the anthracycline drug daunorubicin (DNR) was used as a model drug, and its release properties were evaluated under different pH and thermo-conditions. Cytotoxicity studies were also carried out against MCF-7 breast cancer and 3T3 mouse embryonic fibroblast cells. According to our results, the synthesized microcontainers present desired pH and thermo behavior and can be applied in drug delivery systems. It is worth mentioning that the synthesized microcontainers which incorporated the drug DNR exhibit higher toxicity than the free drug. - Highlights: • Synthesis and characterization of biocompatible triggered microcontainers (MCs) • pH- and thermo-responsive co-polymers • Loading and release study: mechanism • MC's toxicity on healthy and cancer cell lines • IC{sub 50} determination.

  14. Mitomycin C-soybean phosphatidylcholine complex-loaded self-assembled PEG-lipid-PLA hybrid nanoparticles for targeted drug delivery and dual-controlled drug release.

    Science.gov (United States)

    Li, Yang; Wu, Hongjie; Yang, Xiangrui; Jia, Mengmeng; Li, Yanxiu; Huang, Yu; Lin, Jinyan; Wu, Shichao; Hou, Zhenqing

    2014-08-04

    Most present drug-phospholipid delivery systems were based on a water-insoluble drug-phospholipid complex but rarely water-soluble drug-phospholipid complex. Mitomycin C (MMC) is a water-soluble anticancer drug extensively used in first-line chemotherapy but is limited by its poor aqueous stability in vitro, rapid elimination from the body, and lack of target specificity. In this article, we report the MMC-soybean phosphatidylcholine complex-loaded PEG-lipid-PLA hybrid nanoparticles (NPs) with Folate (FA) functionalization (FA-PEG-PE-PLA NPs@MMC-SPC) for targeted drug delivery and dual-controlled drug release. FA-PEG-PE-PLA NPs@MMC-SPC comprise a hydrophobic core (PLA) loaded with MMC-SPC, an amphiphilic lipid interface layer (PE), a hydrophilic shell (PEG), and a targeting ligand (FA) on the surface, with a spherical shape, a nanoscaled particle size, and high drug encapsulation efficiency of almost 95%. The advantage of the new drug delivery systems is the early phase controlled drug release by the drug-phospholipid complex and the late-phase controlled drug release by the pH-sensitive polymer-lipid hybrid NPs. In vitro cytotoxicity and hemolysis assays demonstrated that the drug carriers were cytocompatible and hemocompatible. The pharmacokinetics study in rats showed that FA-PEG-PE-PLA NPs@MMC-SPC significantly prolonged the blood circulation time compared to that of the free MMC. More importantly, FA-PEG-PE-PLA NPs@MMC-SPC presented the enhanced cell uptake/cytotoxicity in vitro and superior tumor accumulation/therapeutic efficacy in vivo while reducing the systemic toxicity. A significant accumulation of MMC in the nuclei as the site of MMC action achieved in FA-PEG-PE-PLA NPs@MMC-SPC made them ideal for MMC drug delivery. This study may provide an effective strategy for the design and development of the water-soluble drug-phospholipid complex-based targeted drug delivery and sustained/controlled drug release.

  15. A multifunctional magnetic nanocarrier bearing fluorescent dye for targeted drug delivery by enhanced two-photon triggered release.

    Science.gov (United States)

    Banerjee, Shashwat S; Chen, Dong-Hwang

    2009-05-06

    We report a novel nanoformulation for targeted drug delivery which utilizes nanophotonics through the fusion of nanotechnology with biomedical application. The approach involves an energy-transferring magnetic nanoscopic co-assembly fabricated of rhodamine B (RDB) fluorescent dye grafted gum arabic modified Fe(3)O(4) magnetic nanoparticle and photosensitive linker by which dexamethasone drug is conjugated to the magnetic nano-assembly. The advantage offered by this nanoformulation is the indirect photo-triggered-on-demand drug release by efficient up-converting energy of the near-IR (NIR) light to higher energy and intraparticle energy transfer from the dye grafted magnetic nanoparticle to the linker for drug release by cleavage. The synthesized nanoparticles were found to be of ultra-small size (13.33 nm) and are monodispersed in an aqueous suspension. Dexamethasone (Dexa) drug conjugated to RDB-GAMNP by photosensitive linker showed appreciable release of Dexa by photo-triggered response on exposure to radiation having a wavelength in the NIR region whereas no detectable release was observed in the dark. Photo-triggered response for the nanoformulation not bearing the rhodamine B dye was drastically less as less Dexa was released on exposure to NIR radiation which suggest that the photo-cleavage of linker and release of Dexa mainly originated from the indirect excitation through the uphill energy conversions based on donor-acceptor model FRET. The promising pathway of nanophotonics for the on-demand release of the drug makes this nanocarrier very promising for applications in nanomedicine.

  16. Solid lipid particles for oral delivery of peptide and protein drugs I - Elucidating the release mechanism of lysozyme during lipolysis

    DEFF Research Database (Denmark)

    Christophersen, Philip Carsten B; Zhang, L.; Yang, M

    2013-01-01

    The mechanism of protein release from solid lipid particles was investigated by a new lipolysis model in a biorelevant medium containing both bile salts and phospholipids. Lysozyme, a model protein, was formulated into solid lipid particles using four different types of lipids, two triglycerides...... with different chain-length of fatty acyl groups i.e. trimyristin (TG14) and tristearin (TG18), and two lipid blends dominated by diglycerides and monoglycerides, respectively. The release of lysozyme from the solid lipid particles and the lipid hydrolysis process were assessed in the lipolysis model, while...... the drug release mechanism from solid lipid particles and can potentially be used in rational selection of lipid excipients for oral delivery of peptide/protein drugs....

  17. Mucoadhesive drug delivery systems

    Directory of Open Access Journals (Sweden)

    Rahamatullah Shaikh

    2011-01-01

    Full Text Available Mucoadhesion is commonly defined as the adhesion between two materials, at least one of which is a mucosal surface. Over the past few decades, mucosal drug delivery has received a great deal of attention. Mucoadhesive dosage forms may be designed to enable prolonged retention at the site of application, providing a controlled rate of drug release for improved therapeutic outcome. Application of dosage forms to mucosal surfaces may be of benefit to drug molecules not amenable to the oral route, such as those that undergo acid degradation or extensive first-pass metabolism. The mucoadhesive ability of a dosage form is dependent upon a variety of factors, including the nature of the mucosal tissue and the physicochemical properties of the polymeric formulation. This review article aims to provide an overview of the various aspects of mucoadhesion, mucoadhesive materials, factors affecting mucoadhesion, evaluating methods, and finally various mucoadhesive drug delivery systems (buccal, nasal, ocular, gastro, vaginal, and rectal.

  18. Deeper insight into the drug release mechanisms in Eudragit RL-based delivery systems.

    Science.gov (United States)

    Glaessl, B; Siepmann, F; Tucker, I; Rades, T; Siepmann, J

    2010-04-15

    Tartaric acid, metoprolol free base and metoprolol tartrate act as plasticisers for Eudragit RL, in the dry but also in the wet state. Fitting analytical solutions of Fick's second law of diffusion allowed for the determination of the apparent diffusivities of water and of tartaric acid, metoprolol free base and metoprolol tartrate upon exposure of thin films to 0.1M HCl, phosphate buffer pH 7.4 and distilled water. Based on these calculations, it could be shown that water penetration into the systems is predominantly controlled by pure diffusion, irrespective of the type of bulk fluid. Interestingly, the plasticising effect of metoprolol tartrate was much more pronounced than that of tartaric acid, resulting in monotonically increasing diffusion coefficients with increasing initial drug content. In contrast, the plasticising activity of metoprolol free base was very limited in the wet state, due to drug precipitation in aqueous environments. Partially observed film shrinking (after an initial system swelling) could be attributed to the leaching of the plasticising compound into the release medium, resulting in less flexible polymeric networks and squeezing out of water. Also the release of tartaric acid, metoprolol free base and metoprolol tartrate into the investigated bulk fluids was predominantly diffusion controlled. However, the precipitation of the free base in wet films rendered the mass transport mechanisms more complex, at moderate and high initial drug loadings. The obtained new insight into the underlying drug release mechanisms in Eudragit RL networks can help to facilitate the optimisation of this type of dosage forms.

  19. pH- and thermo-responsive microcontainers as potential drug delivery systems: Morphological characteristic, release and cytotoxicity studies.

    Science.gov (United States)

    Efthimiadou, Eleni K; Tapeinos, Christos; Tziveleka, Leto-Aikaterini; Boukos, Nikos; Kordas, George

    2014-04-01

    Polymeric pH- and thermo-sensitive microcontainers (MCs) were developed as a potential drug delivery system for cancer therapy. It is well known that cancer cells exhibit notable characteristics such as acidic pH due to glycolytic cycle and higher temperature due to their higher proliferation rate. Based on these characteristics, we constructed a dual pH- and thermo-sensitive material for specific drug release on the pathological tissue. The MC's fabrication is based on a two-step procedure, in which, the first step involves the core synthesis and the second one is related to the shell formation. The core consists of poly(methyl methacrylate (PMMA), while the shell consists of PMMA, poly(isopropylacrylamide), poly(acrylic acid) and poly(divinylbenzene). Three different types of MCs were synthesized based on the seed polymerization method. The synthesized MCs were characterized structurally by Fourier transform infrared and morphologically by scanning electron microscopy. Dynamic light scattering was also used to study their behavior in aqueous solution under different pH and temperature conditions. For the loading and release study, the anthracycline drug daunorubicin (DNR) was used as a model drug, and its release properties were evaluated under different pH and thermo-conditions. Cytotoxicity studies were also carried out against MCF-7 breast cancer and 3T3 mouse embryonic fibroblast cells. According to our results, the synthesized microcontainers present desired pH and thermo behavior and can be applied in drug delivery systems. It is worth mentioning that the synthesized microcontainers which incorporated the drug DNR exhibit higher toxicity than the free drug.

  20. A novel dissolution media for testing drug release from a nanostructured polysaccharide-based colon specific drug delivery system: an approach to alternative colon media.

    Science.gov (United States)

    Kotla, Niranjan G; Singh, Sima; Maddiboyina, Balaji; Sunnapu, Omprakash; Webster, Thomas J

    2016-01-01

    The aim of this study was to develop a novel microbially triggered and animal-sparing dissolution method for testing of nanorough polysaccharide-based micron granules for colonic drug delivery. In this method, probiotic cultures of bacteria present in the colonic region were prepared and added to the dissolution media and compared with the performance of conventional dissolution methodologies (such as media with rat cecal and human fecal media). In this study, the predominant species (such as Bacteroides, Bifidobacterium, Lactobacillus species, Eubacterium and Streptococcus) were cultured in 12% w/v skimmed milk powder and 5% w/v grade "A" honey. Approximately 10(10)-10(11) colony forming units m/L of probiotic culture was added to the dissolution media to test the drug release of polysaccharide-based formulations. A USP dissolution apparatus I/II using a gradient pH dissolution method was used to evaluate drug release from formulations meant for colonic drug delivery. Drug release of guar gum/Eudragit FS30D coated 5-fluorouracil granules was assessed under gastric and small intestine conditions within a simulated colonic environment involving fermentation testing with the probiotic culture. The results with the probiotic system were comparable to those obtained from the rat cecal and human fecal-based fermentation model, thereby suggesting that a probiotic dissolution method can be successfully applied for drug release testing of any polysaccharide-based oral formulation meant for colonic delivery. As such, this study significantly adds to the nanostructured biomaterials' community by elucidating an easier assay for colonic drug delivery.

  1. Rheological characterization of xanthan gum and hydroxypropylmethyl cellulose with respect to controlled-release drug delivery.

    Science.gov (United States)

    Talukdar, M M; Vinckier, I; Moldenaers, P; Kinget, R

    1996-05-01

    It has been observed previously that xanthan gum (XG) and hydroxypropylmethyl cellulose (HPMC) show different drug release behavior. In order to clarify these findings, the rheological properties of both polymers have been determined by oscillatory as well as by steady shear measurements. Aqueous solutions of 4 and 7% (w/w) polymer have been used to simulate the outer surface of a hydrated tablet. The dynamic moduli, i.e., storage modulus (G') and loss modulus (G") of the two polymers have been determined in pure water and USP phosphate buffer pH 7.4 at different dilutions. In this concentration range XG solution exhibits "gel-like" behavior, while HPMC behaves as a typical polymer solution. These findings are quite consistent with the reported higher ability of XG matrices to retard drug release than HPMC matrices for controlled-release formulation. The effects of differences in drug solubility and acidity, as well as the addition of lactose, and of the ionic strength of the medium on the rheological properties of XG and HPMC solutions have been studied in detail. Among these parameters, only the salt concentration exerts an enhancing effect on both moduli of XG, while no detectable influence on HPMC solution could be observed.

  2. Magnetic targeted drug delivery

    Directory of Open Access Journals (Sweden)

    Timothy Wiedmann

    2009-10-01

    Full Text Available Lung cancer is the most common cause of death from cancer in both men and women. Treatment by intravenous or oral administration of chemotherapy agents results in serious and often treatment-limiting side effects. Delivery of drugs directly to the lung by inhalation of an aerosol holds the promise of achieving a higher concentration in the lung with lower blood levels. To further enhance the selective lung deposition, it may be possible to target deposition by using external magnetic fields to direct the delivery of drug coupled to magnetic particles. Moreover, alternating magnetic fields can be used to induce particle heating, which in turn controls the drug release rate with the appropriate thermal sensitive material.With this goal, superparamagetic nanoparticles (SPNP were prepared and characterized, and enhanced magnetic deposition was demonstrated in vitro and in vivo. SPNPs were also incorporated into a lipid-based/SPNP aerosol formulation, and drug release was shown to be controlled by thermal activation. Because of the inherent imaging potential of SPNPs, this use of nanotechnology offers the possibility of coupling the diagnosis of lung cancer to drug release, which perhaps will ultimately provide the “magic bullet” that Paul Ehrlich originally sought.

  3. Dual-drug delivery by porous silicon nanoparticles for improved cellular uptake, sustained release, and combination therapy.

    Science.gov (United States)

    Wang, Chang-Fang; Mäkilä, Ermei M; Kaasalainen, Martti H; Hagström, Marja V; Salonen, Jarno J; Hirvonen, Jouni T; Santos, Hélder A

    2015-04-01

    Dual-drug delivery of antiangiogenic and chemotherapeutic drugs can enhance the therapeutic effect for cancer therapy. Conjugation of methotrexate (MTX) to porous silicon (PSi) nanoparticles (MTX-PSi) with positively charged surface can improve the cellular uptake of MTX and inhibit the proliferation of cancer cells. Herein, MTX-PSi conjugates sustained the release of MTX up to 96 h, and the released fragments including MTX were confirmed by mass spectrometry. The intracellular distribution of the MTX-PSi nanoparticles was confirmed by transmission electron microscopy. Compared to pure MTX, the MTX-PSi achieved similar inhibition of cell proliferation in folate receptor (FR) over-expressing U87 MG cancer cells, and a higher effect in low FR-expressing EA.hy926 cells. Nuclear fragmentation analysis demonstrated programmed cell apoptosis of MTX-PSi in the high/low FR-expressing cancer cells, whereas PSi alone at the same dose had a minor effect on cell apoptosis. Finally, the porous structure of MTX-PSi enabled a successful concomitant loading of another anti-angiogenic hydrophobic drug, sorafenib, and considerably enhanced the dissolution rate of sorafenib. Overall, the MTX-PSi nanoparticles can be used as a platform for combination chemotherapy by simultaneously enhancing the dissolution rate of a hydrophobic drug and sustaining the release of a conjugated chemotherapeutic drug.

  4. ENHANCED LIVER DELIVERY AND SUSTAINED RELEASE OF CURCUMIN WITH DRUG LOADED NANOPARTICLES AFTER INTRAVENOUS ADMINISTRATION IN RATS

    Directory of Open Access Journals (Sweden)

    SURESH K, BONEPALLY REDDY, JITHAN A

    2013-09-01

    Full Text Available Liver targeting drug delivery systems can improve thedelivery of several drugs useful in the treatment of liverdisorders such as cirrhosis and liver cancer. Theobjective of this study was to prepare the biodegradablenanoparticles containing curcumin, a well-knownhepatoprotective agent and further to evaluate the livertargetability and sustained release of curcumin with thedeveloped nanoformulation. Curcumin nanoparticleswere prepared by double emulsion (w/o/w solventevaporation method using different drug polymer ratios.Poly-ε-caprolactone was used in the preparation. Theprepared formulations were evaluated for particles size,surface potential, entrapment efficiency, in vitro release,drug polymer interaction. Four different formulationsCNP1, CNP2, CNP3 and CNP4 were prepared.Optimized formulation (CNP3 was evaluated forpharmacokinetics and hepatoprotective activity in CCl4induced liver toxicity model after i.v. administration.Optimized formulation was selected based on the size,entrapment efficiency and release characteristics.Curcumin i.v. solution and oral suspension form wereused as the reference. Particle size of all formulationswas in the range of 300-470 nm and the entrapmentefficiencies were in the range of 75-85 %. Drug releasefrom the nanoparticles was sustained both in vitro and invivo. Nanoparticle formulation tested in vivodemonstrated better pharmacokinetics andpharmacodynamics compared to the reference. Druglevels in the liver were significantly higher withnanoparticular formulation. Thus, this studysuccessfully prepared a nanoparticular formulationcontaining curcumin with polycaprolactone as thepolymer. With the developed formulation better livertargetability was achieved.

  5. Polyelectrolyte Complex Based Interfacial Drug Delivery System with Controlled Loading and Improved Release Performance for Bone Therapeutics

    Directory of Open Access Journals (Sweden)

    David Vehlow

    2016-03-01

    Full Text Available An improved interfacial drug delivery system (DDS based on polyelectrolyte complex (PEC coatings with controlled drug loading and improved release performance was elaborated. The cationic homopolypeptide poly(l-lysine (PLL was complexed with a mixture of two cellulose sulfates (CS of low and high degree of substitution, so that the CS and PLL solution have around equal molar charged units. As drugs the antibiotic rifampicin (RIF and the bisphosphonate risedronate (RIS were integrated. As an important advantage over previous PEC systems this one can be centrifuged, the supernatant discarded, the dense pellet phase (coacervate separated, and again redispersed in fresh water phase. This behavior has three benefits: (i Access to the loading capacity of the drug, since the concentration of the free drug can be measured by spectroscopy; (ii lower initial burst and higher residual amount of drug due to removal of unbound drug and (iii complete adhesive stability due to the removal of polyelectrolytes (PEL excess component. It was found that the pH value and ionic strength strongly affected drug content and release of RIS and RIF. At the clinically relevant implant material (Ti40Nb similar PEC adhesive and drug release properties compared to the model substrate were found. Unloaded PEC coatings at Ti40Nb showed a similar number and morphology of above cultivated human mesenchymal stem cells (hMSC compared to uncoated Ti40Nb and resulted in considerable production of bone mineral. RIS loaded PEC coatings showed similar effects after 24 h but resulted in reduced number and unhealthy appearance of hMSC after 48 h due to cell toxicity of RIS.

  6. A novel dissolution media for testing drug release from a nanostructured polysaccharide-based colon specific drug delivery system: an approach to alternative colon media

    Directory of Open Access Journals (Sweden)

    Kotla NG

    2016-03-01

    Full Text Available Niranjan G Kotla,1,2 Sima Singh,1,3 Balaji Maddiboyina,4 Omprakash Sunnapu,2 Thomas J Webster5,6 1School of Pharmaceutical Sciences, Lovely Professional University, Punjab, India; 2Technologies for the Advancement of Science, Institute for Stem Cell Biology and Regenerative Medicine, Bangalore, Karnataka, India; 3Department of Pharmaceutical Sciences, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, India; 4Department of Pharmaceutics, Vishwabharathi College of Pharmaceutical Sciences, Guntur, Andhra Pradesh, India; 5Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 6Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia Abstract: The aim of this study was to develop a novel microbially triggered and animal-sparing dissolution method for testing of nanorough polysaccharide-based micron granules for colonic drug delivery. In this method, probiotic cultures of bacteria present in the colonic region were prepared and added to the dissolution media and compared with the performance of conventional dissolution methodologies (such as media with rat cecal and human fecal media. In this study, the predominant species (such as Bacteroides, Bifidobacterium, Lactobacillus species, Eubacterium and Streptococcus were cultured in 12% w/v skimmed milk powder and 5% w/v grade “A” honey. Approximately 1010–1011 colony forming units m/L of probiotic culture was added to the dissolution media to test the drug release of polysaccharide-based formulations. A USP dissolution apparatus I/II using a gradient pH dissolution method was used to evaluate drug release from formulations meant for colonic drug delivery. Drug release of guar gum/Eudragit FS30D coated 5-fluorouracil granules was assessed under gastric and small intestine conditions within a simulated colonic environment involving fermentation testing with the probiotic culture. The results with the probiotic system were

  7. Dual drug delivery using 'smart' liposomes for triggered release of anticancer agents

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Ankit; Gulbake, Arvind; Jain, Ashish; Shilpi, Satish; Hurkat, Pooja; Jain, Sanjay K., E-mail: drskjainin@yahoo.com [Dr. Hari Singh Gour Vishwavidyalaya, Pharmaceutics Research Projects Laboratory, Department of Pharmaceutical Sciences (India)

    2013-07-15

    Ovarian cancer is one of the most fatal gynecologic cancers. In this debut study, dual approach using synergistically active combination of paclitaxel-topotecan (Pac-Top; 20:1, w/w) is investigated with utilization of characteristic features of tumor micro-environment and additionally overexpressed folate receptors (FR-{alpha}) to achieve targeting to tumor site. Various liposomes namely liposomes, PEGylated liposomes, and FR-targeted PEGylated liposomes with lipid compositions viz. DPPC:DMPG (85.5:9.5), DPPC:DMPG:mPEG{sub 2000}-DSPE (85.5:9.5:5), and DPPC:DMPG:mPEG{sub 2000}-DSPE:DSPE-PEG-folate (85.5:9.5:4.5:0.5), respectively, were developed using thin film casting method. These were nanometric in size around 200 nm. In vitro drug release study showed initial burst release followed by sustained release for more than 72 h at physiological milieu (37 {+-} 0.5 Degree-Sign C, pH 7.4) while burst release (i.e., more than 90 %) within 5 min at simulated tumor milieu (41 {+-} 1 Degree-Sign C, pH 4). SRB cytotoxicity assay in OVCAR-3 cell line revealed Pac-Top free (20:1, w/w) to be more toxic (GI{sub 50} = 6.5 {mu}g/ml) than positive control (Adriamycin, GI{sub 50} = 9.1 {mu}g/ml) and FR-targeted PEGylated liposomes GI{sub 50} (14.7 {mu}g/ml). Moreover, florescence microscopy showed the highest cell uptake of FR-targeted PEGylated liposomes so called 'smart liposomes' which has not only mediated effective targeting to FR-{alpha} but also triggered release of drugs upon hyperthermia.

  8. Antibiotic-loaded chitosan-Laponite films for local drug delivery by titanium implants: cell proliferation and drug release studies.

    Science.gov (United States)

    Ordikhani, Farideh; Dehghani, Mehdi; Simchi, Arash

    2015-12-01

    In this study, chitosan-Laponite nanocomposite coatings with bone regenerative potential and controlled drug-release capacity are prepared by electrophoretic deposition technique. The controlled release of a glycopeptide drug, i.e. vancomycin, is attained by the intercalation of the polymer and drug macromolecules into silicate galleries. Fourier-transform infrared spectrometry reveals electrostatic interactions between the charged structure of clay and the amine and hydroxyl groups of chitosan and vancomycin, leading to a complex positively-charged system with high electrophoretic mobility. By applying electric field the charged particles are deposited on the surface of titanium foils and uniform chitosan films containing 25-55 wt% Laponite and 937-1655 µg/cm(2) vancomycin are obtained. Nanocomposite films exhibit improved cell attachment with higher cell viability. Alkaline phosphatase assay reveals enhanced cell proliferation due the gradual dissolution of Laponite particles into the culture medium. In-vitro drug-release studies show lower release rate through a longer period for the nanocomposite compared to pristine chitosan.

  9. Drug delivery goes supercritical

    Directory of Open Access Journals (Sweden)

    Patrick J. Ginty

    2005-08-01

    Full Text Available In the field of drug delivery, the ability to control the size, morphology, and release of drug particles is fundamental to good targeting, but is often hampered by harsh processing conditions or inadequate methods; likewise for the processing of polymeric controlled-release systems. However, the use of supercritical fluids such as supercritical CO2 (scCO2 has provided a ‘clean’ and effective alternative to traditional methods of drug and polymer processing. In particular, scCO2 has a number of unique properties that make it possible to process both bioactive molecules and amorphous polymers without using toxic organic solvents or elevated temperatures. Here, we review the positive impact that supercritical fluids have had on the micronization, encapsulation, and impregnation of molecules of interest to both the pharmaceutical and biotechnology industries.

  10. Target delivery and controlled release of the chemopreventive drug sulindac by using an advanced layered double hydroxide nanomatrix formulation system.

    Science.gov (United States)

    Minagawa, Keiji; Berber, Mohamed R; Hafez, Inas H; Mori, Takeshi; Tanaka, Masami

    2012-04-01

    Target delivery and controlled release of the chemopreventive drug sulindac that possesses low water solubility present a great challenge for its pharmaceutical industry. Here, we offered an advanced nanomatrix formulation system of sulindac based on layered double hydroxide materials. The X-ray analysis and infrared spectroscopy confirmed the incorporation of sulindac into the gallery of the layered double hydroxides. The incorporation ratios of sulindac were recorded to be 45, 31 and 20 for coprecipitation, anion-exchange and reconstruction techniques, respectively. The scanning electron microscopy showed a nanomatrix-structure of ~50 nm. The release studies of sulindac-nanomatrix showed a 96% controlled release at the small intestine solution during 3 h(s), indicating an enhancement in the dissolution profile of sulindac after the matrix formation. The layered structure of the matrix supplied sulindac with a well-ordered structure and a relatively hydrophobic microenvironment that controlled the guest hydrolysis and reactivity during the release process. The laminar structure of layered double hydroxides offered a safe preservation for sulindac against photodecarboxylation, and enhanced the drug thermal stability from 190 to 230° C. The ionic electrostatic interaction of sulindac through its acidic group with layered double hydroxides demolished the gastrointestinal ulceration.

  11. Synthetic geopolymers for controlled delivery of oxycodone: adjustable and nanostructured porosity enables tunable and sustained drug release.

    Science.gov (United States)

    Forsgren, Johan; Pedersen, Christian; Strømme, Maria; Engqvist, Håkan

    2011-03-15

    In this article we for the first time present a fully synthetic mesoporous geopolymer drug carrier for controlled release of opioids. Nanoparticulate precursor powders with different Al/Si-ratios were synthesized by a sol-gel route and used in the preparation of different geopolymers, which could be structurally tailored by adjusting the Al/Si-ratio and the curing temperatures. In particular, it was shown that the pore sizes of the geopolymers decreased with increasing Al/Si ratio and that completely mesoporous geopolymers could be produced from precursor particles with the Al/Si ratio 2:1. The mesoporosity was shown to be associated with a sustained and linear in vitro release profile of the opioid oxycodone. A clinically relevant release period of about 12 h was obtained by adjusting the size of the pellets. The easily fabricated and tunable geopolymers presented in this study constitute a novel approach in the development of controlled release formulations, not only for opioids, but whenever the clinical indication is best treated with a constant supply of drugs and when the mechanical stability of the delivery vehicle is crucial.

  12. Synthetic geopolymers for controlled delivery of oxycodone: adjustable and nanostructured porosity enables tunable and sustained drug release.

    Directory of Open Access Journals (Sweden)

    Johan Forsgren

    Full Text Available In this article we for the first time present a fully synthetic mesoporous geopolymer drug carrier for controlled release of opioids. Nanoparticulate precursor powders with different Al/Si-ratios were synthesized by a sol-gel route and used in the preparation of different geopolymers, which could be structurally tailored by adjusting the Al/Si-ratio and the curing temperatures. In particular, it was shown that the pore sizes of the geopolymers decreased with increasing Al/Si ratio and that completely mesoporous geopolymers could be produced from precursor particles with the Al/Si ratio 2:1. The mesoporosity was shown to be associated with a sustained and linear in vitro release profile of the opioid oxycodone. A clinically relevant release period of about 12 h was obtained by adjusting the size of the pellets. The easily fabricated and tunable geopolymers presented in this study constitute a novel approach in the development of controlled release formulations, not only for opioids, but whenever the clinical indication is best treated with a constant supply of drugs and when the mechanical stability of the delivery vehicle is crucial.

  13. Phase Composition Control of Calcium Phosphate Nanoparticles for Tunable Drug Delivery Kinetics and Treatment of Osteomyelitis. Part 1: Preparation and Drug Release

    Science.gov (United States)

    Uskoković, Vuk; Desai, Tejal A.

    2012-01-01

    Developed in this study is a multifunctional material for simultaneous osseoinduction and drug delivery, potentially applicable in the treatment of osteomyelitis. It is composed of agglomerates of nanoparticles of calcium phosphate (CAP) with different monophasic contents. The drug loading capacity and the release kinetics were investigated on two model drug compounds with different chemical structures, sizes and adsorption propensities: bovine serum albumin and fluorescein. Loading of CAP powders with small molecule drugs was achieved by physisorption and desiccation-induced agglomeration of nanoparticulate subunits into microscopic blocks. The material dissolution rate and the drug release rate depended on the nature of the CAP phase, decreasing from monocalcium phosphate to monetite to amorphous CAP and calcium pyrophosphate to hydroxyapatite. The sustained release of the two model drugs was shown to be directly relatable to the degradation rate of CAP carriers. It was demonstrated that the degradation rate of the carrier and the drug release kinetics could be made tunable within the time scale of 1–2 h for the most soluble CAP phase, monocalcium phosphate, to 1–2 years for the least soluble one, hydroxyapatite. From the standpoint of antibiotic therapy for osteomyelitis, typically lasting for six weeks, the most prospective CAP powder was amorphous CAP with its release time scale for a small organic molecule, the same category to which antibiotics belong, of 1 – 2 months under the conditions applied in our experiments. By combining these different CAP phases in various proportions, drug release profiles could be tailored to the therapeutic occasion. PMID:23115118

  14. Bioresponsive matrices in drug delivery

    Directory of Open Access Journals (Sweden)

    Ye George JC

    2010-11-01

    Full Text Available Abstract For years, the field of drug delivery has focused on (1 controlling the release of a therapeutic and (2 targeting the therapeutic to a specific cell type. These research endeavors have concentrated mainly on the development of new degradable polymers and molecule-labeled drug delivery vehicles. Recent interest in biomaterials that respond to their environment have opened new methods to trigger the release of drugs and localize the therapeutic within a particular site. These novel biomaterials, usually termed "smart" or "intelligent", are able to deliver a therapeutic agent based on either environmental cues or a remote stimulus. Stimuli-responsive materials could potentially elicit a therapeutically effective dose without adverse side effects. Polymers responding to different stimuli, such as pH, light, temperature, ultrasound, magnetism, or biomolecules have been investigated as potential drug delivery vehicles. This review describes the most recent advances in "smart" drug delivery systems that respond to one or multiple stimuli.

  15. Bimatoprost-loaded ocular inserts as sustained release drug delivery systems for glaucoma treatment: in vitro and in vivo evaluation.

    Directory of Open Access Journals (Sweden)

    Juçara Ribeiro Franca

    Full Text Available The purpose of the present study was to develop and assess a novel sustained-release drug delivery system of Bimatoprost (BIM. Chitosan polymeric inserts were prepared using the solvent casting method and characterized by swelling studies, infrared spectroscopy, differential scanning calorimetry, drug content, scanning electron microscopy and in vitro drug release. Biodistribution of 99mTc-BIM eye drops and 99mTc-BIM-loaded inserts, after ocular administration in Wistar rats, was accessed by ex vivo radiation counting. The inserts were evaluated for their therapeutic efficacy in glaucomatous Wistar rats. Glaucoma was induced by weekly intracameral injection of hyaluronic acid. BIM-loaded inserts (equivalent to 9.0 µg BIM were administered once into conjunctival sac, after ocular hypertension confirmation. BIM eye drop was topically instilled in a second group of glaucomatous rats for 15 days days, while placebo inserts were administered once in a third group. An untreated glaucomatous group was used as control. Intraocular pressure (IOP was monitored for four consecutive weeks after treatment began. At the end of the experiment, retinal ganglion cells and optic nerve head cupping were evaluated in the histological eye sections. Characterization results revealed that the drug physically interacted, but did not chemically react with the polymeric matrix. Inserts sustainedly released BIM in vitro during 8 hours. Biodistribution studies showed that the amount of 99mTc-BIM that remained in the eye was significantly lower after eye drop instillation than after chitosan insert implantation. BIM-loaded inserts lowered IOP for 4 weeks, after one application, while IOP values remained significantly high for the placebo and untreated groups. Eye drops were only effective during the daily treatment period. IOP results were reflected in RGC counting and optic nerve head cupping damage. BIM-loaded inserts provided sustained release of BIM and seem to be a

  16. Bimatoprost-loaded ocular inserts as sustained release drug delivery systems for glaucoma treatment: in vitro and in vivo evaluation.

    Science.gov (United States)

    Franca, Juçara Ribeiro; Foureaux, Giselle; Fuscaldi, Leonardo Lima; Ribeiro, Tatiana Gomes; Rodrigues, Lívia Bomfim; Bravo, Renata; Castilho, Rachel Oliveira; Yoshida, Maria Irene; Cardoso, Valbert Nascimento; Fernandes, Simone Odília; Cronemberger, Sebastião; Ferreira, Anderson José; Faraco, André Augusto Gomes

    2014-01-01

    The purpose of the present study was to develop and assess a novel sustained-release drug delivery system of Bimatoprost (BIM). Chitosan polymeric inserts were prepared using the solvent casting method and characterized by swelling studies, infrared spectroscopy, differential scanning calorimetry, drug content, scanning electron microscopy and in vitro drug release. Biodistribution of 99mTc-BIM eye drops and 99mTc-BIM-loaded inserts, after ocular administration in Wistar rats, was accessed by ex vivo radiation counting. The inserts were evaluated for their therapeutic efficacy in glaucomatous Wistar rats. Glaucoma was induced by weekly intracameral injection of hyaluronic acid. BIM-loaded inserts (equivalent to 9.0 µg BIM) were administered once into conjunctival sac, after ocular hypertension confirmation. BIM eye drop was topically instilled in a second group of glaucomatous rats for 15 days days, while placebo inserts were administered once in a third group. An untreated glaucomatous group was used as control. Intraocular pressure (IOP) was monitored for four consecutive weeks after treatment began. At the end of the experiment, retinal ganglion cells and optic nerve head cupping were evaluated in the histological eye sections. Characterization results revealed that the drug physically interacted, but did not chemically react with the polymeric matrix. Inserts sustainedly released BIM in vitro during 8 hours. Biodistribution studies showed that the amount of 99mTc-BIM that remained in the eye was significantly lower after eye drop instillation than after chitosan insert implantation. BIM-loaded inserts lowered IOP for 4 weeks, after one application, while IOP values remained significantly high for the placebo and untreated groups. Eye drops were only effective during the daily treatment period. IOP results were reflected in RGC counting and optic nerve head cupping damage. BIM-loaded inserts provided sustained release of BIM and seem to be a promising system

  17. A REVIEW ON OSMOTIC DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Harnish Patel

    2012-04-01

    Full Text Available Conventional oral drug delivery systems supply an instantaneous release of drug, which cannot control the release of the drug and effective concentration at the target site. This kind of dosing pattern may result in constantly changing, unpredictable plasma concentrations. Drugs can be delivered in a controlled pattern over a long period of time by the process of osmosis. Osmotic devices are the most promising strategy based systems for controlled drug delivery. They are the most reliable controlled drug delivery systems and could be employed as oral drug delivery systems. Various patents available for osmotic drug delivery system like Rose-Nelson pump, Higuchi leeper pump, Higuchi Theeuwes pump, Elementary Osmotic pump etc. ODDS are useful for poorly soluble drug, for pulsatile drug release, zero order release. Various techniques available for preparation of ODDS include push pull osmotic Pump, osmotic Brusting osmotic pump, liquid oral osmotic system, sandwiched osmotic tablets , delayed delivery osmotic device, monolithic osmotic System and controlled porosity osmotic Pump. Osmotically controlled oral drug delivery systems utilize osmotic pressure for controlled delivery of active agents. These systems can be utilized for systemic as well as targeted delivery of drugs. The release of drugs from osmotic systems is governed by various formulation factors such as solubility and osmotic pressure of the core components, size of the delivery orifice, and nature of the rate-controlling membrane. In this Paper mainly focused on the Osmotic System with example, the basic component of osmotic system and evaluation parameter of the osmotic drug delivery system.

  18. Transdermal drug delivery

    OpenAIRE

    Prausnitz, Mark R.; Langer, Robert

    2008-01-01

    Transdermal drug delivery has made an important contribution to medical practice, but has yet to fully achieve its potential as an alternative to oral delivery and hypodermic injections. First-generation transdermal delivery systems have continued their steady increase in clinical use for delivery of small, lipophilic, low-dose drugs. Second-generation delivery systems using chemical enhancers, non-cavitational ultrasound and iontophoresis have also resulted in clinical products; the ability ...

  19. Ultrasound-triggered release of materials entrapped in microbubble-liposome constructs: a tool for targeted drug delivery.

    Science.gov (United States)

    Klibanov, Alexander L; Shevchenko, Talent I; Raju, Balasundar I; Seip, Ralf; Chin, Chien T

    2010-11-20

    We investigated the preparation of ultrasound-triggered drug delivery system, based on a pendant complex of microbubble coated with liposomes. Biotinylated decafluorobutane microbubbles were coated with biotinylated liposomes via a streptavidin linker. Liposomes were prepared incorporating calcein and thrombin. Based on initial concentration of calcein, over 1 um(3) payload volume per each microbubble-liposome particle was achieved, when 100 nm liposomes were used. Insonation of microbubble-liposome pendants in vitro resulted in the complete destruction of microbubbles and triggered release of a significant fraction of the entrapped material. Treatment with 1MHz ultrasound (5 pulses, 100 ms, 7 MPa peak negative acoustic pressure) resulted in the release of ~30% of entrapped calcein, as estimated by the fluorescence quenching assay. Thrombin release from liposomes complexed with microbubbles (11% of entrapped material) due to ultrasound treatment was estimated by a chromogenic substrate study. Prior to insonation, substrate hydrolysis was at background level. Ultrasound-triggered release of thrombin from the pendant complexes caused an acceleration of blood clotting.

  20. Enzyme-responsive doxorubicin release from dendrimer nanoparticles for anticancer drug delivery

    Directory of Open Access Journals (Sweden)

    Lee SJ

    2015-08-01

    Full Text Available Sang Joon Lee,1,* Young-Il Jeong,2,* Hyung-Kyu Park,3 Dae Hwan Kang,2,4 Jong-Suk Oh,3 Sam-Gyu Lee,5 Hyun Chul Lee31Department of Biomedical Sciences, Chonnam National University Medical School, Gwangju, 2Biomedical Research Institute, Pusan National University Hospital, Busan, 3Department of Microbiology, Chonnam National University Medical School, Gwangju, 4Research Institute for Convergence of Biomedical Science and Technology, Pusan National University Yangsan Hospital, Gyeongnam, 5Department of Physical and Rehabilitation Medicine, Chonnam National University Medical School, Gwangju, Republic of Korea*These authors contributed equally to this workBackground: Since cancer cells are normally over-expressed cathepsin B, we synthesized dendrimer-methoxy poly(ethylene glycol (MPEG-doxorubicin (DOX conjugates using a cathepsin B-cleavable peptide for anticancer drug targeting.Methods: Gly-Phe-Leu-Gly peptide was conjugated with the carboxylic acid end groups of a dendrimer, which was then conjugated with MPEG amine and doxorubicin by aid of carbodiimide chemistry (abbreviated as DendGDP. Dendrimer-MPEG-DOX conjugates without Gly-Phe-Leu-Gly peptide linkage was also synthesized for comparison (DendDP. Nanoparticles were then prepared using a dialysis procedure.Results: The synthesized DendGDP was confirmed with 1H nuclear magnetic resonance spectroscopy. The DendDP and DendGDP nanoparticles had a small particle size of less than 200 nm and had a spherical morphology. DendGDP had cathepsin B-sensitive drug release properties while DendDP did not show cathepsin B sensitivity. Further, DendGDP had improved anticancer activity when compared with doxorubicin or DendDP in an in vivo CT26 tumor xenograft model, ie, the volume of the CT26 tumor xenograft was significantly inhibited when compared with xenografts treated with doxorubicin or DendDP nanoparticles. The DendGDP nanoparticles were found to be relatively concentrated in the tumor tissue and

  1. pH-Sensitive, N-ethoxybenzylimidazole (NEBI) bifunctional crosslinkers enable triggered release of therapeutics from drug delivery carriers.

    Science.gov (United States)

    Luong, Alice; Issarapanichkit, Tawny; Kong, Seong Deok; Fong, Rina; Yang, Jerry

    2010-11-21

    This paper presents a pH-sensitive bifunctional crosslinker that enables facile conjugation of small molecule therapeutics to macromolecular carriers for use in drug delivery systems. This N-ethoxybenzylimidazole (NEBI) bifunctional crosslinker was designed to exploit mildly acidic, subcellular environments to trigger the release of therapeutics upon internalization in cells. We demonstrate that an analog of doxorubicin (a representative example of an anticancer therapeutic) conjugated to human serum albumin (HSA, a representative example of a macromolecular carrier) via this NEBI crosslinker can internalize and localize into acidic lysosomes of ovarian cancer cells. Fluorescence imaging and cell viability studies demonstrate that the HSA-NEBI-doxorubicin conjugate exhibited improved uptake and cytotoxic activity compared to the unconjugated doxorubicin analog. The pH-sensitive NEBI group was also shown to be relatively stable to biologically-relevant metal Lewis acids and to serum proteins, supporting that these bifunctional crosslinkers may be useful for constructing drug delivery systems that will be stable in biological fluids such as blood.

  2. Rhythmomimetic drug delivery

    CERN Document Server

    Calderer, M Carme; Siegel, Ronald A; Yao, Lingxing

    2015-01-01

    We present modeling, analysis and numerical simulation of a prototype glucose driven drug delivery device based on chemomechanical interactions and volume phase transitions in polyelectrolyte gels. The device consists of two fluid compartments, an external cell (I) mimicking the physiological environment, and a closed chamber (II), separated by a hydrogel membrane. Cell I, which is held at constant pH and ionic strength, provides a constant supply of glucose to cell II, and also serves as clearance station for reaction products. Cell II contains the drug to be delivered to the body, an enzyme that catalyzes conversion of glucose into hydrogen ions, and a piece of marble to remove excess hydrogen ions that would otherwise overwhelm the system. When the membrane is swollen, glucose flux into Cell II is high, leading to rapid production of hydrogen ions. However, the hydrogen ions are not immediately released to Cell I but react, instead, with the negatively charged carboxyl groups of the membrane, which collaps...

  3. Solid lipid nanoparticles for nose to brain delivery of haloperidol: in vitro drug release and pharmacokinetics evaluation

    Directory of Open Access Journals (Sweden)

    Mohd Yasir

    2014-12-01

    Full Text Available In the present study, haloperidol (HP-loaded solid lipid nanoparticles (SLNs were prepared to enhance the uptake of HP to brain via intranasal (i.n. delivery. SLNs were prepared by a modified emulsification–diffusion technique and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release, and stability. All parameters were found to be in an acceptable range. In vitro drug release was found to be 94.16±4.78% after 24 h and was fitted to the Higuchi model with a very high correlation coefficient (R2=0.9941. Pharmacokinetics studies were performed on albino Wistar rats and the concentration of HP in brain and blood was measured by high performance liquid chromatography. The brain/blood ratio at 0.5 h for HP-SLNs i.n., HP sol. i.n. and HP sol. i.v. was 1.61, 0.17 and 0.031, respectively, indicating direct nose-to-brain transport, bypassing the blood–brain barrier. The maximum concentration (Cmax in brain achieved from i.n. administration of HP-SLNs (329.17±20.89 ng/mL, Tmax 2 h was significantly higher than that achieved after i.v. (76.95±7.62 ng/mL, Tmax 1 h, and i.n. (90.13±6.28 ng/mL, Tmax 2 h administration of HP sol. The highest drug-targeting efficiency (2362.43% and direct transport percentage (95.77% was found with HP-SLNs as compared to the other formulations. Higher DTE (% and DTP (% suggest that HP-SLNs have better brain targeting efficiency as compared to other formulations.

  4. Solid lipid nanoparticles for nose to brain delivery of haloperidol: in vitro drug release and pharmacokinetics evaluation.

    Science.gov (United States)

    Yasir, Mohd; Sara, Udai Vir Singh

    2014-12-01

    In the present study, haloperidol (HP)-loaded solid lipid nanoparticles (SLNs) were prepared to enhance the uptake of HP to brain via intranasal (i.n.) delivery. SLNs were prepared by a modified emulsification-diffusion technique and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release, and stability. All parameters were found to be in an acceptable range. In vitro drug release was found to be 94.16±4.78% after 24 h and was fitted to the Higuchi model with a very high correlation coefficient (R (2)=0.9941). Pharmacokinetics studies were performed on albino Wistar rats and the concentration of HP in brain and blood was measured by high performance liquid chromatography. The brain/blood ratio at 0.5 h for HP-SLNs i.n., HP sol. i.n. and HP sol. i.v. was 1.61, 0.17 and 0.031, respectively, indicating direct nose-to-brain transport, bypassing the blood-brain barrier. The maximum concentration (C max) in brain achieved from i.n. administration of HP-SLNs (329.17±20.89 ng/mL, T max 2 h) was significantly higher than that achieved after i.v. (76.95±7.62 ng/mL, T max 1 h), and i.n. (90.13±6.28 ng/mL, T max 2 h) administration of HP sol. The highest drug-targeting efficiency (2362.43%) and direct transport percentage (95.77%) was found with HP-SLNs as compared to the other formulations. Higher DTE (%) and DTP (%) suggest that HP-SLNs have better brain targeting efficiency as compared to other formulations.

  5. Biodegradable Poly(D,L-Lactide/Lipid Blend Microparticles Prepared by Oil-in-Water Emulsion Method for Controlled Release Drug Delivery

    Directory of Open Access Journals (Sweden)

    Yaowalak Srisuwan

    2014-03-01

    Full Text Available The effects of blend ratio and drug loading content of poly(D,L-lactide (PDLL/stearic acid blends on microparticle characteristics and drug release behaviors were evaluated. The blend microparticles were prepared by an oil-in-water emulsion solvent evaporation method for drug delivery of a poorly water-soluble model drug, indomethacin. The microparticles were characterized using a combination of scanning electron microscopy (SEM, light scattering particle size analysis, differential scanning calorimetry (DSC and UV-vis spectrophotometry. The blend microparticles with a PDLL/stearic acid blend ratio in the range 100/0-95/5 (w/w exhibited a spherical shape with a smooth surface. Blend microparticles with a similar size (167-177 µm and drug loading efficiency (60-67% were obtained. The drug loading content did not affect the characteristics of the blend microparticles. An in vitro drug release test demonstrated that the level of drug release decreased as the stearic acid blend ratio increased and the drug loading content decreased. The overall results indicated that it was possible to use PDLL/stearic acid blend microparticles as a controlled release drug delivery system.

  6. Development of a Prolonged-Release Drug Delivery System with Magnolol Loaded in Amino-Functionalized Mesoporous Silica

    Directory of Open Access Journals (Sweden)

    Alina Stefanache

    2017-03-01

    Full Text Available Magnolol (MG is a small-molecule neolignan polyphenolic compound isolated from the genus Magnolia. The anti-inflammatory, anti-oxidative, anti-diabetic, anti-tumorgenic, anti-neurodegenerative, anti-depressant and anti-microbial properties of MG are well documented in recent literature. These fascinating multiple biological activities of MG encourage research about the development of new delivery and administration approaches able to maximize its potential benefits. This study describes the amino-functionalization of the SBA-15 (Santa Barbara Amorphous mesoporous matrix by post-synthesis grafting using APTES (3-aminopropyltriethoxysilane and the characterization of amino-functionalized mesoporous silica SBA-15 loaded with MG in order to achieve modified drug delivery systems. The amino-functionalization of silica SBA-15 was carried out by grafting by refluxing in dry toluene. The powders obtained were characterized texturally by Brunauer-Emmett-Teller (BET surface area analysis measurements and morphologically by scanning electron microscopy. MG loading degree in the nanoporous matrix was determined by the HPLC method at λ = 290 nm. Results showed that by grafting the amino groups in the silica SBA-15, we obtained amino-functionalized silica SBA-15 with an ordered structure, with specific surfaces and pore sizes that differ from the original matrix, which was reflected in the amount of MG immobilized and release kinetics profile.

  7. Pulsatile drug delivery systems: An approach for controlled drug delivery

    Directory of Open Access Journals (Sweden)

    Arora Shweta

    2006-01-01

    Full Text Available Pulsatile systems are gaining a lot of interest as they deliver the drug at the right site of action at the right time and in the right amount, thus providing spatial and temporal delivery and increasing patient compliance. These systems are designed according to the circadian rhythm of the body. The principle rationale for the use of pulsatile release is for the drugs where a constant drug release, i.e., a zero-order release is not desired. The release of the drug as a pulse after a lag time has to be designed in such a way that a complete and rapid drug release follows the lag time. Various systems like capsular systems, osmotic systems, single- and multiple-unit systems based on the use of soluble or erodible polymer coating and use of rupturable membranes have been dealt with in the article. It summarizes the latest technological developments, formulation parameters, and release profiles of these systems. Products available as once-a-daily formulation based on Pulsatile release like Pulsincap ®, Ritalin ®, and Pulsys ® are also covered in the review. These systems are beneficial for the drugs having chronopharmacological behaviour where night time dosing is required and for the drugs having high first-pass effect and having specific site of absorption in GIT. Drugs used in asthmatic patients and patients suffering from rheumatoid arthritis are also discussed along with many other examples.

  8. Gold Nanoplates as Cancer-Targeted Photothermal Actuators for Drug Delivery and Triggered Release

    Directory of Open Access Journals (Sweden)

    Tyler Brann

    2016-01-01

    Full Text Available The selective exposure of cancerous tissue to systemically delivered chemotherapeutic agents remains a major challenge facing cancer therapy. To address this question, a near infrared responsive oligonucleotide-coated (AS1411, hairpin, or both gold nanoplate loaded with doxorubicin is demonstrated to be nontoxic to cells without triggered release, while being acutely toxic to cells after 5 minutes of laser exposure to trigger DOX release. Conjugation of oligonucleotides to the nanoplates is confirmed by an average increase in hydrodynamic diameter of 30.6 nm, an average blue shift of the plasmon resonance peak by 36 nm, and an average −10 mV shift in zeta potential of the particles. DOX loading through intercalation into the hairpin DNA structure is confirmed through fluorescence measurements. For both GNP-Hairpin and GNP-Hairpin-AS1411, ~60% of loaded DOX is released after the first 5 minutes of laser exposure (λ=817 nm, with complete release after two more 5-minute exposures. Preliminary proof of concept is demonstrated in vitro using A549 and MDA-MB-231 cell lines as models for breast and lung cancer, respectively. Exposure of cells to untriggered DOX-loaded conjugate with no laser exposure results in little to no toxicity, while laser-triggered release of DOX causes significant cell death.

  9. Layer-by-Layer Assembled Milk Protein Coated Magnetic Nanoparticle Enabled Oral Drug Delivery with High Stability in Stomach and Enzyme-Responsive Release in Small Intestine

    Science.gov (United States)

    Huang, Jing; Shu, Qing; Wang, Liya; Wu, Hui; Wang, Andrew Y.; Mao, Hui

    2014-01-01

    We report a novel drug delivery system composed of layer-by-layer (LBL) milk protein casein (CN) coated iron oxide nanoparticles. Doxorubicin (DOX) and indocyanine green (ICG) were selected as model drug molecules, which were incorporated into the inner polymeric layer, and subsequently coated with casein. The resulting casein coated iron oxide nanoparticles (CN-DOX/ICG-IO) were stable in the acidic gastric condition with the presence of gastric protease. On the other hand, the loaded drugs were released when the casein outer layer was gradually degraded by the intestinal protease in the simulated intestine condition. Such unique properties enable maintenance of the bioactivity of the drugs and thus enhance the drug delivery efficiency. Ex vivo experiments showed that the LBL CN-DOX-IO improved the translocation of DOX across microvilli and its absorption in the small intestine sacs. In vivo imaging of mice that were orally administered with these LBL CN-ICG-IO nanostructures further confirmed that the reported drug delivery vehicles could pass the stomach without significant degradation, and then accumulated in the small intestine. In addition, the magnetic iron oxide nanoparticle core offered an MRI contrast enhancing capability for in vivo imaging guided drug delivery. Therefore, the reported LBL CN-DOX/ICG-IO is a promising oral drug delivery nanoplatform, especially for drugs that are poorly soluble in water or degradable in the gastric environment. PMID:25477177

  10. Drug delivery and therapeutic impact of extended-release acetylsalicylic acid.

    Science.gov (United States)

    Bliden, Kevin P; Patrick, Jeff; Pennell, Andrew T; Tantry, Udaya S; Gurbel, Paul A

    2016-01-01

    Current treatment guidelines recommend once-daily, low-dose acetylsalicylic acid (ASA; aspirin) for secondary prevention of cardiovascular events. However, the anti-thrombotic benefits of traditional ASA formulations may not extend over a 24-h period, especially in patients at high risk for a recurrent cardiovascular event. A next-generation, extended-release ASA formulation (ER-ASA) has been developed to provide 24-h anti-thrombotic coverage with once-daily dosing. The pharmacokinetics of ER-ASA indicates slower absorption and prolonged ASA release versus immediate-release ASA, with a favorable safety profile. ER-ASA minimizes systemic ASA absorption and provides sustained antiplatelet effects over a 24-h period.

  11. Risk assessment and experimental design in the development of a prolonged release drug delivery system with paliperidone.

    Science.gov (United States)

    Iurian, Sonia; Turdean, Luana; Tomuta, Ioan

    2017-01-01

    This study focuses on the development of a drug product based on a risk assessment-based approach, within the quality by design paradigm. A prolonged release system was proposed for paliperidone (Pal) delivery, containing Kollidon(®) SR as an insoluble matrix agent and hydroxypropyl cellulose, hydroxypropyl methylcellulose (HPMC), or sodium carboxymethyl cellulose as a hydrophilic polymer. The experimental part was preceded by the identification of potential sources of variability through Ishikawa diagrams, and failure mode and effects analysis was used to deliver the critical process parameters that were further optimized by design of experiments. A D-optimal design was used to investigate the effects of Kollidon SR ratio (X1), the type of hydrophilic polymer (X2), and the percentage of hydrophilic polymer (X3) on the percentages of dissolved Pal over 24 h (Y1-Y9). Effects expressed as regression coefficients and response surfaces were generated, along with a design space for the preparation of a target formulation in an experimental area with low error risk. The optimal formulation contained 27.62% Kollidon SR and 8.73% HPMC and achieved the prolonged release of Pal, with low burst effect, at ratios that were very close to the ones predicted by the model. Thus, the parameters with the highest impact on the final product quality were studied, and safe ranges were established for their variations. Finally, a risk mitigation and control strategy was proposed to assure the quality of the system, by constant process monitoring.

  12. Risk assessment and experimental design in the development of a prolonged release drug delivery system with paliperidone

    Science.gov (United States)

    Iurian, Sonia; Turdean, Luana; Tomuta, Ioan

    2017-01-01

    This study focuses on the development of a drug product based on a risk assessment-based approach, within the quality by design paradigm. A prolonged release system was proposed for paliperidone (Pal) delivery, containing Kollidon® SR as an insoluble matrix agent and hydroxypropyl cellulose, hydroxypropyl methylcellulose (HPMC), or sodium carboxymethyl cellulose as a hydrophilic polymer. The experimental part was preceded by the identification of potential sources of variability through Ishikawa diagrams, and failure mode and effects analysis was used to deliver the critical process parameters that were further optimized by design of experiments. A D-optimal design was used to investigate the effects of Kollidon SR ratio (X1), the type of hydrophilic polymer (X2), and the percentage of hydrophilic polymer (X3) on the percentages of dissolved Pal over 24 h (Y1–Y9). Effects expressed as regression coefficients and response surfaces were generated, along with a design space for the preparation of a target formulation in an experimental area with low error risk. The optimal formulation contained 27.62% Kollidon SR and 8.73% HPMC and achieved the prolonged release of Pal, with low burst effect, at ratios that were very close to the ones predicted by the model. Thus, the parameters with the highest impact on the final product quality were studied, and safe ranges were established for their variations. Finally, a risk mitigation and control strategy was proposed to assure the quality of the system, by constant process monitoring.

  13. The role of lipid-based nano delivery systems on oral bioavailability enhancement of fenofibrate, a BCS II drug: comparison with fast-release formulations.

    Science.gov (United States)

    Weng, Tengfei; Qi, Jianping; Lu, Yi; Wang, Kai; Tian, Zhiqiang; Hu, Kaili; Yin, Zongning; Wu, Wei

    2014-09-24

    The aim of this study was to compare various formulations solid dispersion pellets (SDP), nanostructured lipid carriers (NLCs) and a self-microemulsifying drug delivery system (SMEDDS) generally accepted to be the most efficient drug delivery systems for BCS II drugs using fenofibrate (FNB) as a model drug. The size and morphology of NLCs and SMEDDS was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Their release behaviors were investigated in medium with or without pancreatic lipase. The oral bioavailability of the various formulations was compared in beagle dogs using commercial Lipanthyl® capsules (micronized formulation) as a reference. The release of FNB from SDP was much faster than that from NLCs and SMEDDS in medium without lipase, whereas the release rate from NLCs and SMEDDS was increased after adding pancreatic lipase into the release medium. However, NLCs and SMEDDS increased the bioavailability of FNB to 705.11% and 809.10%, respectively, in comparison with Lipanthyl® capsules, although the relative bioavailability of FNB was only 366.05% after administration of SDPs. Thus, lipid-based drug delivery systems (such as NLCs and SMEDDS) may have more advantages than immediate release systems (such as SDPs and Lipanthyl® capsules).

  14. Buccal drug delivery.

    Science.gov (United States)

    Smart, John D

    2005-05-01

    Buccal formulations have been developed to allow prolonged localised therapy and enhanced systemic delivery. The buccal mucosa, however, while avoiding first-pass effects, is a formidable barrier to drug absorption, especially for biopharmaceutical products (proteins and oligonucleotides) arising from the recent advances in genomics and proteomics. The buccal route is typically used for extended drug delivery, so formulations that can be attached to the buccal mucosa are favoured. The bioadhesive polymers used in buccal drug delivery to retain a formulation are typically hydrophilic macro-molecules containing numerous hydrogen bonding groups. Newer second-generation bioadhesives have been developed and these include modified or new polymers that allow enhanced adhesion and/or drug delivery, in addition to site-specific ligands such as lectins. Over the last 20 years a wide range of formulations has been developed for buccal drug delivery (tablet, patch, liquids and semisolids) but comparatively few have found their way onto the market. Currently, this route is restricted to the delivery of a limited number of small lipophilic molecules that readily cross the buccal mucosa. However, this route could become a significant means for the delivery of a range of active agents in the coming years, if the barriers to buccal drug delivery are overcome. In particular, patient acceptability and the successful systemic delivery of large molecules (proteins, oligonucleotides and polysaccharides) via this route remains both a significant opportunity and challenge, and new/improved technologies may be required to address these.

  15. Rational design on controlled release ion-exchange polymeric microspheres and polymer-lipid hybrid nanoparticles for the delivery of water-soluble drugs through a multidisciplinary approach

    Science.gov (United States)

    Li, Yongqiang

    Sulfopropyl dextran sulfate (SP-DS) microspheres and polymer-lipid hybrid nanoparticles (PLN) for the delivery of water-soluble anticancer drugs and P-glycoprotein inhibitors were developed by our group recently and demonstrated effectiveness in local chemotherapy. To optimize the delivery performance of these particulate systems, particularly PLN, an integrated multidisciplinary approach was developed, based on an in-depth understanding of drug-excipient interactions, internal structure, drug loading and release mechanisms, and application of advanced modeling/optimization techniques. An artificial neural networks (ANN) simulator capable of formulation optimization and drug release prediction was developed. In vitro drug release kinetics of SP-DS microspheres, with various drug loading and in different release media, were predicted by ANN. The effects of independent variables on drug release were evaluated. Good modeling performance suggested that ANN is a useful tool to predict drug release from ion-exchange microspheres. To further improve the performance of PLN, drug-polymer-lipid interactions were characterized theoretically and experimentally using verapamil hydrochloride (VRP) as a model drug and dextran sulfate sodium (DS) as a counter-ion polymer. VRP-DS complexation followed a stoichiometric rule and solid-state transformation of VRP were observed. Dodecanoic acid (DA) was identified as the lead lipid carrier material. Based upon the optimized drug-polymer-lipid interactions, PLN with high drug loading capacity (36%, w/w) and sustained release without initial burst release were achieved. VRP remained amorphous and was molecularly dispersed within PLN. H-bonding contributed to the miscibility between the VRP-DS complex and DA. Drug release from PLN was mainly controlled by diffusion and ion-exchange processes. Drug loading capacity and particle size of PLN depend on the formulation factors of the weight ratio of drug to lipid and concentrations of

  16. Effect of particle size of calcium phosphate based bioceramic drug delivery carrier on the release kinetics of ciprofloxacin hydrochloride: an in vitro study

    Science.gov (United States)

    Sasikumar, Swamiappan

    2013-09-01

    Hydroxyapatite (HAP) is the constituent of calcium phosphate based bone cement and it is extensively used as a bone substitute and drug delivery vehicle in various biomedical applications. In the present study we investigated the release kinetics of ciprofloxacin loaded HAP and analyzed its ability to function as a targeted and sustained release drug carrier. Synthesis of HAP was carried out by combustion method using tartaric acid as a fuel and nitric acid as an oxidizer. Powder XRD and FTIR techniques were employed to characterize the phase purity of the drug carrier and to verify the chemical interaction between the drug and carrier. The synthesized powders were sieve separated to make two different drug carriers with different particle sizes and the surface topography of the pellets of the drug carrier was imaged by AFM. Surface area and porosity of the drug carrier was carried out using surface area analyzer. The in-vitro drug release kinetics was performed in simulated body fluid, at 37.3°C. The amount of ciprofloxacin released is measured using UV-visible spectroscopy following the characteristic λ max of 278 nm. The release saturates around 450 h which indicates that it can be used as a targeted and sustained release carrier for bone infections.

  17. Comparison of in vitro dialysis release methods of loperamide-encapsulated liposomal gel for topical drug delivery

    Directory of Open Access Journals (Sweden)

    Hua S

    2014-01-01

    Full Text Available Susan HuaThe School of Biomedical Sciences and Pharmacy, The University of Newcastle, Callaghan, NSW, AustraliaBackground: The purpose of this study was to determine the most appropriate dialysis equilibrium method to assess liposomal gel formulations containing hydrophobic drugs, to give the most accurate indication of drug release.Methods: Loperamide hydrochloride-encapsulated liposomes, composed of L-α-phosphatidylcholine and cholesterol (molar ratio of 2:1, were prepared according to the method of dried lipid film hydration. The liposomes were incorporated into a carbopol gel (0.5%, weight/weight. The release of the drug from the nanoparticles was assessed using a number of variations of the dialysis technique, taking into account solubility parameters and formulation. Method 1 (below saturation point and Method 2 (above saturation point used a dilution method to evaluate how drug concentration and solubility affects the in vitro drug-release profile of loperamide hydrochloride, while Methods 3 (below saturation point and 4 (above saturation point evaluated how drug concentration and the gel base affect the release profile.Results: In Method 1, the liposomes showed a rapid release of just over 60% in the first 3 hours and then a slower, sustained release to just over 70% at 24 hours. Method 2 showed a gradual, sustained release profile with the liposomes with 55% release at 24 hours. In Method 3, the liposomes showed a rapid burst release of 98% at 2 hours. In Method 4, the liposomal gel had a rapid release of 60% within 3 hours and then a more gradual, sustained release with 86% release at 24 hours. The free drug suspension in Methods 2 and 4 showed a limited release across the dialysis membrane, in comparison to Methods 1 and 3, which showed a complete release in a timely manner.Conclusion: This study has demonstrated that the actual method used for equilibrium dialysis plays a significant role in determining the true characteristics of a

  18. Self-assembled drug delivery systems. Part 7: hepatocyte-targeted nanoassemblies of an adefovir lipid derivative with cytochrome P450-triggered drug release.

    Science.gov (United States)

    Du, Lina; Wu, Lailong; Jin, Yiguang; Jia, Junwei; Li, Miao; Wang, Yu

    2014-09-10

    A novel strategy was used in the design of self-assembled drug delivery systems (SADDSs) in this study. The nanoassemblies of an amphiphilic adefovir lipid derivative were prepared and demonstrated to have the functions of hepatocyte targeting, enzyme-triggered drug release and high anti-hepatitis effect. An amphiphilic adefovir lipid derivative, N-lauroyl-1-(3-chlorophenyl)-1,3-propanyl phosphonyl adefovir (LCPA) was prepared and formed the nanoassemblies by injecting the mixture of LCPA and another amphiphilic polymer, d-galactide polyoxyethylene (20) cetyl ether (GPCE) (ca. 20:1, mol/mol) into water. The nanoassemblies were very stable and showed negative charge. LCPA was sensitive to the cytochrome P450 isozymes that were expressed predominantly in the hepatocytes to produce adefovir. GPCE contained a long hydrophilic chain and a galactose ligand targeting the asialoglycoprotein receptors overexpressed on the surface of hepatocytes. The nanoassemblies showed the long-circulating and liver targeting effects according to the results of pharmacokinetics, tissue distribution and fluorescence imagination after bolus intravenous administration of the nanoassemblies to the mice. The highly efficient hepatitis B treatment was achieved by 10 day continuous administration of the nanoassemblies to the HBV-infected mice. Many functions were combined in the nanoassemblies, including prodrug, molecular self-assembly, nanotechnology, long-circulating, hepatocyte targeting and hepatocyte over expressing enzyme-triggered drug release.

  19. Risk assessment and experimental design in the development of a prolonged release drug delivery system with paliperidone

    Directory of Open Access Journals (Sweden)

    Iurian S

    2017-03-01

    Full Text Available Sonia Iurian, Luana Turdean, Ioan Tomuta Department of Pharmaceutical Technology and Biopharmacy, University of Medicine and Pharmacy Iuliu Hatieganu, Cluj-Napoca, Romania Abstract: This study focuses on the development of a drug product based on a risk assessment-based approach, within the quality by design paradigm. A prolonged release system was proposed for paliperidone (Pal delivery, containing Kollidon® SR as an insoluble matrix agent and hydroxypropyl cellulose, hydroxypropyl methylcellulose (HPMC, or sodium carboxymethyl cellulose as a hydrophilic polymer. The experimental part was preceded by the identification of potential sources of variability through Ishikawa diagrams, and failure mode and effects analysis was used to deliver the critical process parameters that were further optimized by design of experiments. A D-optimal design was used to investigate the effects of Kollidon SR ratio (X1, the type of hydrophilic polymer (X2, and the percentage of hydrophilic polymer (X3 on the percentages of dissolved Pal over 24 h (Y1–Y9. Effects expressed as regression coefficients and response surfaces were generated, along with a design space for the preparation of a target formulation in an experimental area with low error risk. The optimal formulation contained 27.62% Kollidon SR and 8.73% HPMC and achieved the prolonged release of Pal, with low burst effect, at ratios that were very close to the ones predicted by the model. Thus, the parameters with the highest impact on the final product quality were studied, and safe ranges were established for their variations. Finally, a risk mitigation and control strategy was proposed to assure the quality of the system, by constant process monitoring. Keywords: pharmaceutical development, quality by design, failure mode effects analysis, Ishikawa diagram, fish-bone diagram, hydrophilic matrix

  20. UNIQUE ORAL DRUG DELIVERY SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Raphael M. Ottenbrite; ZHAO Ruifeng; Sam Milstein

    1995-01-01

    An oral drug delivery system using proteinoid microspheres is discussed with respect to its unique dependence on pH. It has been found that certain drugs such as insulin and heparin can be encapsulated in proteinoid spheres at stomach pH's (1-3). These spheres also dissemble at intestinal pH's (6-7) releasing the drug for absorption. Using this technique low molecular weight heparin and human growth hormone have been orally delivered successfully to several animal species. Future work has been proposed to study the interaction and binding of the specific drugs with synthesized oligopeptides.

  1. Miktoarm star copolymers from D-(-)-salicin core aggregated into dandelion-like structures as anticancer drug delivery systems: synthesis, self-assembly and drug release.

    Science.gov (United States)

    Mielańczyk, Anna; Odrobińska, Justyna; Grządka, Sebastian; Mielańczyk, Łukasz; Neugebauer, Dorota

    2016-12-30

    The β-glucoside-based heterofunctional initiator was used in the synthesis of well-defined eight-armed miktopolymers by sequential ring opening polymerization (ROP) of ε-caprolactone (CL) and atom transfer radical (co)polymerization (ATRP) of methyl methacrylate (MMA) and/or tert-butyl methacrylate (tBMA). Consequently, methacrylic acid (MAA) repeating units were introduced via selective cleavage of pendant tert-butyl protecting groups. Both the amphiphilic copolymers and miktoarm copolymers were self-assembled at 37°C and pH 7.4. The aggregates of miktoarm polymers were larger than that formed by polymethacrylate homoarm stars (≥250nm vs ≤200nm). The critical aggregation concentrations (CAC) of (mikto)stars were relatively low (0.006-0.411mg/mL) and decreased with the increase in MAA fraction content. Both MAA-based mikto- and homoarmed (co)polymers with shorter arms exhibited lower doxorubicin (DOX) loading capacity, whereas camptothecin (CPT) was encapsulated preferably by miktostars. The kinetic profiles of drug release showed that the rate of release was higher at acidic environment (pH 5.0) than in neutral pH. In the most cases the studied miktopolymer systems demonstrated the well-controlled delivery of the model anticancer drugs, which can be adjusted by structural parameters of polymeric carriers.

  2. MUCOSAL DRUG DELIVERY SYSTEM

    OpenAIRE

    Madan Jyotsana; Banode Sagar; Dangi Mahesh

    2010-01-01

    The process of mucoadhesion involving a polymeric drug delivery system is a complex one that includes processes such as wetting, adsorption and interpenetration of polymer chains. The success and degree of mucoadhesion bonding is influenced by various polymer-based properties such as the degree of cross-linking, chain length and the presence of various functional groupings. The attractiveness of mucosal-targeted controlled drug delivery of active pharmaceutical ingredients, has led formulatio...

  3. Different HPMC viscosity grades as coating agents for an oral time and/or site-controlled delivery system: an investigation into the mechanisms governing drug release.

    Science.gov (United States)

    Zema, L; Maroni, A; Foppoli, A; Palugan, L; Sangalli, M E; Gazzaniga, A

    2007-06-01

    When used as release-controlling coating agents for tableted core-based pulsatile delivery systems, three different hydroxypropyl methylcellulose (HPMC) grades, Methocel E5, E50, and K4M, provided lag phases of varying duration (Methocel K4M > E50 > E5) and a prompt and quantitative model drug release. Dissolution/mechanical erosion, permeability increase and disruption of the hydrated polymeric layer were assumed to participate in the definition of the overall release pattern. Based on these premises, we investigated what process(es) might prevail in the release-controlling mechanism for each HPMC grade. The polymers were evaluated for dissolution and swelling, while the finished systems were concomitantly evaluated for drug release and polymer dissolution. The obtained results indicated likely similarities between Methocel E5 and E50 performances, which we hypothesized to be mainly dissolution/erosion-controlled, and a clearly different behavior for Methocel K4M. This polymer indeed proved to yield higher viscosity and slower dissolving gel layer, which was able to withstand extensive dissolution/erosion for periods that exceeded the observed lag phases. The particular characteristics of swollen Methocel K4M were shown to be associated with possible drug diffusion phenomena, which might impair the prompt and quantitative release phase that is typical of pulsatile delivery.

  4. Intracellular drug release nanosystems

    Directory of Open Access Journals (Sweden)

    Fenghua Meng

    2012-10-01

    Full Text Available In order to elicit therapeutic effects, many drugs including small molecule anticancer drugs, proteins, siRNA, and DNA have to be delivered and released into the specific cellular compartments typically the cytoplasm or nucleus of target cells. Intracellular environment-responsive nanosystems that exhibit good extracellular stability while rapidly releasing drugs inside cancer cells have been actively pursued for effective cancer therapy. Here, we highlight novel designs of smart nanosystems that release drugs in response to an intracellular biological signal of cancer cells such as acidic pH in endo/lysosomal compartments, enzymes in lysosomes, and redox potential in cytoplasm and the cell nucleus.

  5. FACTORS AFFECT THE RELEASE OF PSEUDOEPHDRINE HYDROCHLORIDE FROM THE UNCOATED CATION EXCHANGE RESIN—BASED DRUG DELIVERY SYSTEM IN VITRO

    Institute of Scientific and Technical Information of China (English)

    LIZhenhua; PIHongqiong; 等

    2001-01-01

    In this paper,it was investigated that the effect of parameters such as the ionic strength,pH.counter-ion type of release medium,particle size.and cross linkage of cation exchange resin on the release of model drug pseudoephedrine hydrochloride(PE) from uncoated drug-resin complex.The drug-resin complex was pepared by the reaction of PE with strongly acidic cation exchange resin(001×4,001×7,001×14) .The result showed that the loading of PE increased with the increase of temperatures.The release of PE from drug-resin complex at 37℃ was monitored in vitro.From the experiments,it was found that the release rate of PE depends on the pH.comosition of the releasing media,increased at lower pH media or with increase of ionic strength of media.Moreover,the release rate of PE was inversely proportional to the cross-linkage and particle size of the cation exchange resin.

  6. FACTORS AFFECT THE RELEASE OF PSEUDOEPHDRINE HYDROCHLORIDE FROM THE UNCOATED CATION EXCHANGE RESIN-BASED DRUG DELIVERY SYSTEM IN VITRO

    Institute of Scientific and Technical Information of China (English)

    LI Zhenhua; PI Hongqiong; HE Binglin

    2001-01-01

    In this paper, it was investigated that the effect of parameters such as the ionic strength,pH, counter-ion type of release medium, particle size, and cross linkage of cation exchange resin on the release of model drug pseudoephedrine hydrochloride (PE) from uncoated drug-resin complex.The drug-resin complex was prepared by the reaction of PE with strongly acidic cation exchange resin (001 ×4, 001 ×7, 001 ×14). The result showed that the loading of PE increased with the increase of temperatures. The release of PE from drug-resin complex at 37 ℃ was monitored in vitro.From the experiments, it was found that the release rate of PE depends on the pH, composition of the releasing media, increased at lower pH media or with increase of ionic strength of media. Moreover,the release rate of PE was inversely proportional to the cross-linkage and particle size of the cation exchange resin.

  7. Electrospun Polymer Blend Nanofibers for Tunable Drug Delivery: The Role of Transformative Phase Separation on Controlling the Release Rate.

    Science.gov (United States)

    Tipduangta, Pratchaya; Belton, Peter; Fábián, László; Wang, Li Ying; Tang, Huiru; Eddleston, Mark; Qi, Sheng

    2016-01-01

    Electrospun fibrous materials have a wide range of biomedical applications, many of them involving the use of polymers as matrices for incorporation of therapeutic agents. The use of polymer blends improves the tuneability of the physicochemical and mechanical properties of the drug loaded fibers. This also benefits the development of controlled drug release formulations, for which the release rate can be modified by altering the ratio of the polymers in the blend. However, to realize these benefits, a clear understanding of the phase behavior of the processed polymer blend is essential. This study reports an in depth investigation of the impact of the electrospinning process on the phase separation of a model partially miscible polymer blend, PVP K90 and HPMCAS, in comparison to other conventional solvent evaporation based processes including film casting and spin coating. The nanoscale stretching and ultrafast solvent removal of electrospinning lead to an enhanced apparent miscibility between the polymers, with the same blends showing micronscale phase separation when processed using film casting and spin coating. Nanoscale phase separation in electrospun blend fibers was confirmed in the dry state. Rapid, layered, macroscale phase separation of the two polymers occurred during the wetting of the fibers. This led to a biphasic drug release profile from the fibers, with a burst release from PVP-rich phases and a slower, more continuous release from HPMCAS-rich phases. It was noted that the model drug, paracetamol, had more favorable partitioning into the PVP-rich phase, which is likely to be a result of greater hydrogen bonding between PVP and paracetamol. This led to higher drug contents in the PVP-rich phases than the HPMCAS-rich phases. By alternating the proportions of the PVP and HPMCAS, the drug release rate can be modulated.

  8. Microwave Assisted Drug Delivery

    DEFF Research Database (Denmark)

    Jónasson, Sævar Þór; Zhurbenko, Vitaliy; Johansen, Tom Keinicke

    2014-01-01

    In this work, the microwave radiation is adopted for remote activation of pharmaceutical drug capsules inside the human body in order to release drugs at a pre-determined time and location. An array of controllable transmitting sources is used to produce a constructive interference at a certain...... focus point inside the body, where the drugs are then released from the specially designed capsules. An experimental setup for microwave activation has been developed and tested on a body phantom that emulates the human torso. A design of sensitive receiving structures for integration with a drug...

  9. Microwave Assisted Drug Delivery

    DEFF Research Database (Denmark)

    Jónasson, Sævar Þór; Zhurbenko, Vitaliy; Johansen, Tom Keinicke

    2014-01-01

    In this work, the microwave radiation is adopted for remote activation of pharmaceutical drug capsules inside the human body in order to release drugs at a pre-determined time and location. An array of controllable transmitting sources is used to produce a constructive interference at a certain...... focus point inside the body, where the drugs are then released from the specially designed capsules. An experimental setup for microwave activation has been developed and tested on a body phantom that emulates the human torso. A design of sensitive receiving structures for integration with a drug...

  10. Lipid-polymer hybrid nanoparticles with rhamnolipid-triggered release capabilities as anti-biofilm drug delivery vehicles

    Institute of Scientific and Technical Information of China (English)

    Wean Sin Cheow; Kunn Hadinoto

    2012-01-01

    In lung biofilm infection therapies,the use of lipid-polymer hybrid nanoparticles to encapsulate drugs has emerged as a promising alternative to using liposomes because they have superior physicochemical stability and still possess the biofilm affinity and sputum-penetrating ability of liposomes.To be deemed equally efficacious as liposomes against bacterial biofilms,however,the capability of hybrid nanoparticles to target-release encapsulated drugs at biofilm colonies must be demonstrated.This communication details our investigations into the trigger-release characteristics of hybrid nanoparticles in response to encountering rhamnolipids,which are ubiquitously present in biofilm colonies of Pseudomonas aeruginosa,a major respiratory pathogen.Poly(lactic-co-glycolic acid) and phosphatidylcholine were used as the polymer nanoparticle core and lipid coat,respectively.These investigations were performed using compounds from various biopharmaceutical classification systems (BCS) that differ in their lipid-membrane permeabilities.The release of BCS Class Ⅲ compounds.which have poor lipid-membrane permeabilities,was successfully triggered by rhamnolipids at a concentration approximately equal to their clinically observed value,and this release was attributed to the disruption of lipid coats by rhamnolipid micelles.Not unexpectedly,BCS Class Ⅰ compounds,which have high lipid-membrane permeabilities,were released freely whether or not rhamnolipids were present.The rate of the triggered release can be controlled by incorporating an additional lipid layer on the hybrid nanoparticles via the electrostatically driven adsorption of lipid vesicles.

  11. 牙周局部缓释给药系统研究进展%Advance in research on periodontal sustained-release local drug delivery systems

    Institute of Scientific and Technical Information of China (English)

    刘庆晓; 杨美燕; 高春生

    2009-01-01

    Periodontal disease is a kind of local inflammatory and destructive diseases,and it is one of the most common human oral diseases. Compared with systemic administration,periodontal sustained-release local drug delivery systems can not only achieve high drug concentration and slow drug release in periodontal pocket,but also minimize side effects and bacterial resistance to drugs caused by systemic administration. Therefore,periodontal sus-tained - release local drug delivery systems have become the focus of the study on periodontal disease therapy at home and abroad. At present,the periodontal sustained-release local drug delivery systems include fiber,film,micro-spheres,gels,stylus and bucco-adhesive tablets. In this article,we reviewed the advance in research on periodontal sustained-release local drug delivery systems.%牙周病是局部炎症破坏性疾病,是人类最常见的口腔疾病之一.与全身给药相比,牙周局部缓释给药系统不仅使药物在牙周袋内达到高浓度,持续杀灭牙周致病菌,而且可以减少全身给药造成的不良反应和细菌耐药性.因此运用局部缓释给药系统治疗牙周病已成为国内外的研究热点,目前已有纤维剂、膜剂、微球、缓释凝胶、棒剂和口腔黏膜粘附片等牙周局部缓释给药系统在临床中使用或已有文献报道.文中主要围绕治疗牙周病的各种局部给药剂型的处方设计原理、关键辅料性质及其制剂优缺点等,详细综述牙周局部缓释给药系统的研究进展.

  12. Characterization and In Vitro Sustained Release of Silibinin from pH Responsive Carbon Nanotube-Based Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Julia M. Tan

    2014-01-01

    Full Text Available The objective of the present study was to develop and characterize an in vitro sustained release formulation of silibinin (SB using commercially available carboxylated multiwalled carbon nanotubes (COOH-MWCNTs and to investigate cytotoxicity action of the synthesized nanohybrid (SB-MWCNTs. The resulting nanohybrid was characterized with Fourier transform infrared (FTIR, Raman spectroscopy, thermogravimetric analysis (TGA, ultraviolet-visible spectrophotometry (UV-Vis, scanning electron microscopy (SEM, and transmission electron microscopy (TEM. FTIR, Raman spectroscopy, and TGA analysis confirmed the adsorption of SB molecules to the COOH-MWCNTs. The release of SB from the COOH-MWCNTs nanocarrier was found to be sustained and pH-dependent. The maximum percentage release of SB from the nanocarrier reached approximately 96.6% and 43.1% within 1000 minutes when exposed to pH 7.4 and pH 4.8 solutions, respectively. It was observed that the release of kinetic behaviour of SB from the MWCNTs nanocarrier conformed well to pseudo-second order kinetic model. The obtained MTT result showed that the SB-MWCNTs exhibited enhanced cytotoxicity to human cancer cell lines in comparison with free SB at lower concentrations. These results suggest that SB-MWCNTs nanohybrid may be a promising nanodrug delivery system with sustained release property for the treatment of cancers.

  13. Beyond platinum: synthesis, characterization, and in vitro toxicity of Cu(II-releasing polymer nanoparticles for potential use as a drug delivery vector

    Directory of Open Access Journals (Sweden)

    Harris Alesha

    2011-01-01

    Full Text Available Abstract The field of drug delivery focuses primarily on delivering small organic molecules or DNA/RNA as therapeutics and has largely ignored the potential for delivering catalytically active transition metal ions and complexes. The delivery of a variety of transition metals has potential for inducing apoptosis in targeted cells. The chief aims of this work were the development of a suitable delivery vector for a prototypical transition metal, Cu2+, and demonstration of the ability to impact cancer cell viability via exposure to such a Cu-loaded vector. Carboxylate-functionalized nanoparticles were synthesized by free radical polymerization and were subsequently loaded with Cu2+ via binding to particle-bound carboxylate functional groups. Cu loading and release were characterized via ICP MS, EDX, XPS, and elemental analysis. Results demonstrated that Cu could be loaded in high weight percent (up to 16 wt.% and that Cu was released from the particles in a pH-dependent manner. Metal release was a function of both pH and the presence of competing ligands. The toxicity of the particles was measured in HeLa cells where reductions in cell viability greater than 95% were observed at high Cu loading. The combined pH sensitivity and significant toxicity make this copper delivery vector an excellent candidate for the targeted killing of disease cells when combined with an effective cellular targeting strategy.

  14. Beyond platinum: synthesis, characterization, and in vitro toxicity of Cu(II)-releasing polymer nanoparticles for potential use as a drug delivery vector

    Science.gov (United States)

    Harris, Alesha N.; Hinojosa, Barbara R.; Chavious, Montaleé D.; Petros, Robby A.

    2011-07-01

    The field of drug delivery focuses primarily on delivering small organic molecules or DNA/RNA as therapeutics and has largely ignored the potential for delivering catalytically active transition metal ions and complexes. The delivery of a variety of transition metals has potential for inducing apoptosis in targeted cells. The chief aims of this work were the development of a suitable delivery vector for a prototypical transition metal, Cu2+, and demonstration of the ability to impact cancer cell viability via exposure to such a Cu-loaded vector. Carboxylate-functionalized nanoparticles were synthesized by free radical polymerization and were subsequently loaded with Cu2+ via binding to particle-bound carboxylate functional groups. Cu loading and release were characterized via ICP MS, EDX, XPS, and elemental analysis. Results demonstrated that Cu could be loaded in high weight percent (up to 16 wt.%) and that Cu was released from the particles in a pH-dependent manner. Metal release was a function of both pH and the presence of competing ligands. The toxicity of the particles was measured in HeLa cells where reductions in cell viability greater than 95% were observed at high Cu loading. The combined pH sensitivity and significant toxicity make this copper delivery vector an excellent candidate for the targeted killing of disease cells when combined with an effective cellular targeting strategy.

  15. Effect of a controlled-release drug delivery system made of oleanolic acid formulated into multivesicular liposomes on hepatocellular carcinoma in vitro and in vivo

    Directory of Open Access Journals (Sweden)

    Luo YL

    2016-07-01

    Full Text Available Yuling Luo, Zhongbing Liu, Xiaoqin Zhang, Juan Huang, Xin Yu, Jinwei Li, Dan Xiong, Xiaoduan Sun, Zhirong Zhong Department of Pharmaceutical Sciences, School of Pharmacy, Southwest Medical University, Luzhou, Sichuan,People’s Republic of ChinaAbstract: The aim of the present study was to develop a novel dosage form of multivesicular liposomes for oleanolic acid (OA to overcome its poor solubility, prolong therapeutic drug levels in the blood, and enhance the antitumor effect on hepatocellular carcinoma. OA-encapsulated multivesicular liposomes (OA-MVLs were prepared by a double-emulsion method, and the formulation was optimized by the central composite design. The morphology, particle size, and drug-loading efficiency of OA-MVLs were investigated. Furthermore, OA-MVLs were also characterized both in vitro and in vivo. The results showed that OA-MVLs were spherical particles with an average particle size of 11.57 µm and an encapsulation efficiency of 82.3%±0.61%. OA-MVLs exhibited a sustained-release pattern in vitro, which was fitted to Ritger–Peppas equation. OA-MVLs inhibited the growth of human HepG2 cells which was confirmed by the MTT assay and fluorescence microscopy detection. The in vivo release of OA from OA-MVLs exhibited a sustained manner, indicating a longer circulation time compared to OA solution. The in vivo toxicity study indicated that medium-dose OA-MVLs exerted no toxic effect on the hosts. Importantly, OA-MVLs suppressed the growth of murine H22 hepatoma and prolonged the survival of tumor-bearing mice. In conclusion, the poorly soluble OA could be encapsulated into MVLs to form a novel controlled-release drug delivery system. The present study may hold promise for OA-MVLs as a new dosage form for sustained-release drug delivery in cancer therapy.Keywords: oleanolic acid, multivesicular liposomes, murine hepatocellular carcinoma, controlled release, cancer therapy

  16. Influence of operational variables in multi-particulate delayed release systems for colon-targeted drug delivery of celecoxib using extrusion spheronization

    Directory of Open Access Journals (Sweden)

    Sinha V

    2010-01-01

    Full Text Available The present research was aimed to formulate and evaluate pH and time-dependent multiparticulate systems for colon-targeted drug delivery of celecoxib (CXB with maximum drug absorption, reduced peak plasma fluctuations, and minimum potential side effects. Multiple unit delayed release systems of the drug in MCC (Avicel® PH-102 grade were prepared using polymethacrylate polymers (Eudragit® L-100 and RSPO as a granulating binder by the extrusion-spheronization technique and characterized for their shape, size, size distribution, friability, density, and moisture content. In vitro release studies were performed in 0.1N HCl, for first 2 h then further performed in phosphate buffer (pH 6.8 for 24 h. The resulting pellets were prepared by extrusion spheronization using different grades of polymethacrylate polymers as a granulating binder, showing a substantial decrease in drug release in initial 5 h (16.28-16.7% and releasing most of the drug in 12-24 h. The geometric and arithmetic mean diameter ranged from (490 to 780 ΅m and (636 to 734 μm, respectively. The minimum to maximum range for circularity, elongation and rectangle were found to be (0.847±0.009 to 0.965±0.078, (1.036±0.057 to 1.185±0.023, and (0.724±0.041 to 0.791±0.047 respectively showing the proper shape and size of the pellets. The content of CXB in the prepared pellets was observed between 98.70 and 99.47% justifying the uniform drug distribution. The in vitro dissolution studies showed that the retardant effect in initial 5 h and most of the drug release in 24 h depended on the ratio and concentration of different grades of methacrylate polymers used in the formulation. CXB-loaded MUPS prepared by the extrusion-spheronization technique using polymethacrylate polymers showed immense potential for colon-specific drug delivery of the drug.

  17. THE STUDY ON THE EFFECT OF FORMULATION VARIABLES ON IN VITRO FLOATING TIME AND THE RELEASE PROPERTIES OF A FLOATING DRUG DELIVERY SYSTEM BY A STATISTICAL OPTIMIZATION TECHNIQUE

    Directory of Open Access Journals (Sweden)

    C. NARENDRA

    2008-03-01

    Full Text Available The present investigation concerns the evaluation of the effect of formulation variables on in vitro floating time and the release properties in developing a floating drug delivery system (FDDS containing a highly water soluble drug metoprolol tartrate (MT in the presence of a gas generating agent. A 32 full factorial design was employed in formulating the FDDS containing hydroxyl propylmethylcellulose (HPMC K4M and sodium carboxymethylcellulose (NaCMC as swellable polymers. Drug-to-polymer ratio and polymer-to-polymer ratio were included as independent variables. The main effect and the interaction terms were quantitatively evaluated by a quadratic model to predict formulations with the floating time desired, and the release properties. It was found that only drug-to-polymer ratio and its quadratic term were found to be significantly affective for all the response variables. Non-Fickian transport was confirmed as a release mechanism from the optimized formulations. The desirability function was used to optimize the response variables, each having a different target, and the observed responses were highly agreed with experimental values. The results demonstrate the feasibility of the model in the development of FDDS containing a highly water-soluble drug MT.

  18. Nanotopography applications in drug delivery

    Science.gov (United States)

    Walsh, Laura A; Allen, Jessica L; Desai, Tejal A

    2016-01-01

    Refinement of micro- and nanofabrication in the semiconductor field has led to innovations in biomedical technologies. Nanotopography, in particular, shows great potential in facilitating drug delivery. The flexibility of fabrication techniques has created a diverse array of topographies that have been developed for drug delivery applications. Nanowires and nanostraws deliver drug cytosolically for in vitro and ex vivo applications. In vivo drug delivery is limited by the barrier function of the epithelium. Nanowires on microspheres increase adhesion and residence time for oral drug delivery, while also increasing permeability of the epithelium. Low aspect ratio nanocolumns increase paracellular permeability, and in conjunction with microneedles increase transdermal drug delivery of biologics in vivo. In summary, nanotopography is a versatile tool for drug delivery. It can deliver directly to cells or be used for in vivo delivery across epithelial barriers. This editorial highlights the application of nanotopography in the field of drug delivery. PMID:26512871

  19. Thiolated polymers as mucoadhesive drug delivery systems.

    Science.gov (United States)

    Duggan, Sarah; Cummins, Wayne; O' Donovan, Orla; Hughes, Helen; Owens, Eleanor

    2017-03-30

    Mucoadhesion is the process of binding a material to the mucosal layer of the body. Utilising both natural and synthetic polymers, mucoadhesive drug delivery is a method of controlled drug release which allows for intimate contact between the polymer and a target tissue. It has the potential to increase bioavailability, decrease potential side effects and offer protection to more sensitive drugs such as proteins and peptide based drugs. The thiolation of polymers has, in the last number of years, come to the fore of mucoadhesive drug delivery, markedly improving mucoadhesion due to the introduction of free thiol groups onto the polymer backbone while also offering a more cohesive polymeric matrix for the slower and more controlled release of drug. This review explores the concept of mucoadhesion and the recent advances in both the polymers and the methods of thiolation used in the synthesis of mucoadhesive drug delivery devices. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Metrology for drug delivery.

    Science.gov (United States)

    Lucas, Peter; Klein, Stephan

    2015-08-01

    In various recently published studies, it is argued that there are underestimated risks with infusion technology, i.e., adverse incidents believed to be caused by inadequate administration of the drugs. This is particularly the case for applications involving very low-flow rates, i.e., metrological infrastructure for low-flow rates. Technical challenges such as these were the reason a European research project "Metrology for Drug Delivery" was started in 2011. In this special issue of Biomedical Engineering, the results of that project are discussed.

  1. PULSATILE DRUG DELIVERY SYSTEMS: RECENT TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Abdul Sayeed*, Md. M. Hamed , Mohd. Rafiq and Nahid Ali

    2013-03-01

    Full Text Available ABSTRACT: Pulsatile Drug Delivery Systems are gaining a lot of interest as they deliver the drug at the right place at the right time and in the right amount, thus providing spatial and temporal delivery and increasing patient compliance. These systems are designed according to the circadian rhythm of the body. The principle rationale for the use of pulsatile release of the drugs is where a constant drug release is not desired. A pulse has to be designed in such a way that a complete and rapid drug release is achieved after the lag time. Various systems like capsular systems, osmotic systems, single- and multiple-unit systems based on the use of soluble or erodible polymer coating and use of rupturable membranes have been dealt with in the article. It summarizes the latest technological developments, formulation parameters, and release profiles of these systems. These systems are beneficial for the drugs having chronopharmacological behavior where night time dosing is required, such as anti-arhythmic and anti-asthmatic. Current review article discussed the reasons for development of pulsatile drug delivery system, types of the disease in which pulsatile release is required, classification, advantages, limitation, and future aspects of pulsatile drug delivery system.

  2. Electroresponsive nanoparticles for drug delivery on demand

    Science.gov (United States)

    Samanta, Devleena; Hosseini-Nassab, Niloufar; Zare, Richard N.

    2016-04-01

    The potential of electroresponsive conducting polymer nanoparticles to be used as general drug delivery systems that allow electrically pulsed, linearly scalable, and on demand release of incorporated drugs is demonstrated. As examples, facile release from polypyrrole nanoparticles is shown for fluorescein, a highly water-soluble model compound, piroxicam, a lipophilic small molecule drug, and insulin, a large hydrophilic peptide hormone. The drug loading is about 13 wt% and release is accomplished in a few seconds by applying a weak constant current or voltage. To identify the parameters that should be finely tuned to tailor the carrier system for the release of the therapeutic molecule of interest, a systematic study of the factors that affect drug delivery is performed, using fluorescein as a model compound. The parameters studied include current, time, voltage, pH, temperature, particle concentration, and ionic strength. Results indicate that there are several degrees of freedom that can be optimized for efficient drug delivery. The ability to modulate linearly drug release from conducting polymers with the applied stimulus can be utilized to design programmable and minimally invasive drug delivery devices.

  3. Nasal mucoadhesive delivery systems of the anti-parkinsonian drug, apomorphine: influence of drug-loading on in vitro and in vivo release in rabbits.

    Science.gov (United States)

    Ikechukwu Ugwoke, M; Sam, E; Van Den Mooter, G; Verbeke, N; Kinget, R

    1999-04-20

    Lyophilized polyacrylic acid powder formulations loaded with apomorphine HCl were prepared and the influence of drug loading on in vitro release and in vivo absorption studied after intranasal administration in rabbits. These formulations prepared with Carbopol 971P, Carbopol 974P and polycarbophil sustained apomorphine release both in vitro and in vivo. The in vitro release rate and mechanism were both influenced by the drug loading. There was no large influence of drug loading on the time to achieve the peak (Tmax) for a particular polymer, but Tmax differed between different polymers. For a particular drug loading, the Tmax from Carbopol 971P was the slowest compared with that for Carbopol 974P and polycarbophil; however, only the Tmax from Carbopol 971P loaded with 15% w/w of apomorphine was significantly longer than polycarbophil of similar drug loading (P=0.0386). The trend further observed was that increasing drug loading led to increased peak plasma concentration and area under the curve (AUC). In the second part of this study, a mixture containing an immediate release component and sustained release formulation was administered in an attempt to increase the initial plasma level, as this could be therapeutically beneficial. Only one peak plasma concentration was observed and the initial plasma concentrations were no higher than those obtained with solely sustained release formulation. The Tmax, the peak plasma drug concentration (Cmax) and AUC from the lactose-containing formulation were lower than the formulation without lactose but the differences were only marginally statistically significant for Cmax (P=0.0911) and AUC (P=0.0668), but not Tmax (P=0.2788).

  4. Protein-Based Drug-Delivery Materials

    Directory of Open Access Journals (Sweden)

    Dave Jao

    2017-05-01

    Full Text Available There is a pressing need for long-term, controlled drug release for sustained treatment of chronic or persistent medical conditions and diseases. Guided drug delivery is difficult because therapeutic compounds need to survive numerous transport barriers and binding targets throughout the body. Nanoscale protein-based polymers are increasingly used for drug and vaccine delivery to cross these biological barriers and through blood circulation to their molecular site of action. Protein-based polymers compared to synthetic polymers have the advantages of good biocompatibility, biodegradability, environmental sustainability, cost effectiveness and availability. This review addresses the sources of protein-based polymers, compares the similarity and differences, and highlights characteristic properties and functionality of these protein materials for sustained and controlled drug release. Targeted drug delivery using highly functional multicomponent protein composites to guide active drugs to the site of interest will also be discussed. A systematical elucidation of drug-delivery efficiency in the case of molecular weight, particle size, shape, morphology, and porosity of materials will then be demonstrated to achieve increased drug absorption. Finally, several important biomedical applications of protein-based materials with drug-delivery function—including bone healing, antibiotic release, wound healing, and corneal regeneration, as well as diabetes, neuroinflammation and cancer treatments—are summarized at the end of this review.

  5. Pharmacosomes: A Potential Vesicular Drug Delivery System

    Directory of Open Access Journals (Sweden)

    D. Nagasamy Venkatesh

    2014-04-01

    Full Text Available Lipid based drug delivery systems have been examined in various studies and exhibited their potential in controlled and targeted drug delivery. Pharmacosomes, a novel vesicular drug delivery system, offering a unique advantage over liposomes and niosomes, and serve as potential alternative to these conventional vesicles. They constitute an amphiphilic phospholipid complex with drug bearing an active hydrogen atom covalently that bind to phospholipids. They provide an efficient delivery of drug required at the site of action, which ultimately reduces the drug toxicity with reduced adverse effects and also reduces the cost of therapy by imparting better biopharmaceutical properties to the drug, resulting in increases bioavailability, especially in case of poorly soluble drugs. As the system is formed by binding the drug (pharmakon to carrier (soma, they are termed as pharmacosomes. Depending upon the chemical structure of the drug lipid complex they may exist as ultrafine vesicular, micellar and hexagonal aggregate. Drug having active hydrogen group such as carboxyl, hydroxyl group can be esterified to lipids, resulting in amphiphilic compound. Pharmacosomes are widely used as carriers for various non-steroidal anti-inflammatory drugs, proteins, cardiovascular and antineoplastic drugs. The release of drug from pharmacosomes is generally governed by the process of enzymatic reaction and acid hydrolysis. Here, in the present review paper we have discussed the potential of pharmacosomes as a controlled and targeted drug delivery system and highlighted the method of preparation and characterization.

  6. Polymethacrylate microparticles gel for topical drug delivery.

    Science.gov (United States)

    Labouta, Hagar Ibrahim; El-Khordagui, Labiba K

    2010-10-01

    Evaluating the potentials of particulate delivery systems in topical drug delivery. Polymethacrylate microparticles (MPs) incorporating verapamil hydrochloride (VRP) as a model hydrophilic drug with potential topical clinical uses, using Eudragit RS100 and Eudragit L100 were prepared for the formulation of a composite topical gel. The effect of initial drug loading, polymer composition, particularly the proportion of Eudragit L100 as an interacting polymer component and the HLB of the dispersing agent on MPs characteristics was investigated. A test MPs formulation was incorporated in gel and evaluated for drug release and human skin permeation. MPs showed high % incorporation efficiency and % yield. Composition of the hybrid polymer matrix was a main determinant of MPs characteristics, particularly drug release. Factors known to influence drug release such as MPs size and high drug solubility were outweighed by strong VRP-Eudragit L100 interaction. The developed MPs gel showed controlled VRP release and reduced skin retention compared to a free drug gel. Topical drug delivery and skin retention could be modulated using particulate delivery systems. From a practical standpoint, the VRP gel developed may offer advantage in a range of dermatological conditions, in response to the growing off-label topical use of VRP.

  7. Nanotechnology-based drug delivery systems

    Directory of Open Access Journals (Sweden)

    Singh Baljit

    2007-12-01

    Full Text Available Abstract Nanoparticles hold tremendous potential as an effective drug delivery system. In this review we discussed recent developments in nanotechnology for drug delivery. To overcome the problems of gene and drug delivery, nanotechnology has gained interest in recent years. Nanosystems with different compositions and biological properties have been extensively investigated for drug and gene delivery applications. To achieve efficient drug delivery it is important to understand the interactions of nanomaterials with the biological environment, targeting cell-surface receptors, drug release, multiple drug administration, stability of therapeutic agents and molecular mechanisms of cell signalling involved in pathobiology of the disease under consideration. Several anti-cancer drugs including paclitaxel, doxorubicin, 5-fluorouracil and dexamethasone have been successfully formulated using nanomaterials. Quantom dots, chitosan, Polylactic/glycolic acid (PLGA and PLGA-based nanoparticles have also been used for in vitro RNAi delivery. Brain cancer is one of the most difficult malignancies to detect and treat mainly because of the difficulty in getting imaging and therapeutic agents past the blood-brain barrier and into the brain. Anti-cancer drugs such as loperamide and doxorubicin bound to nanomaterials have been shown to cross the intact blood-brain barrier and released at therapeutic concentrations in the brain. The use of nanomaterials including peptide-based nanotubes to target the vascular endothelial growth factor (VEGF receptor and cell adhesion molecules like integrins, cadherins and selectins, is a new approach to control disease progression.

  8. MEMS: Enabled Drug Delivery Systems.

    Science.gov (United States)

    Cobo, Angelica; Sheybani, Roya; Meng, Ellis

    2015-05-01

    Drug delivery systems play a crucial role in the treatment and management of medical conditions. Microelectromechanical systems (MEMS) technologies have allowed the development of advanced miniaturized devices for medical and biological applications. This Review presents the use of MEMS technologies to produce drug delivery devices detailing the delivery mechanisms, device formats employed, and various biomedical applications. The integration of dosing control systems, examples of commercially available microtechnology-enabled drug delivery devices, remaining challenges, and future outlook are also discussed.

  9. Image-guided drug delivery: preclinical applications and clinical translation

    NARCIS (Netherlands)

    Ojha, Tarun; Rizzo, Larissa; Storm, Gert; Kiessling, Fabian; Lammers, Twan

    2015-01-01

    Image-guided drug delivery refers to the combination of drug targeting and imaging. Preclinically, image-guided drug delivery can be used for several different purposes, including for monitoring biodistribution, target site accumulation, off-target localization, drug release and drug efficacy. Clini

  10. Image-guided drug delivery : Preclinical applications and clinical translation

    NARCIS (Netherlands)

    Ojha, Tarun; Rizzo, Larissa; Storm, G; Kiessling, Fabian; Lammers, Twan

    2015-01-01

    Image-guided drug delivery refers to the combination of drug targeting and imaging. Preclinically, image-guided drug delivery can be used for several different purposes, including for monitoring biodistribution, target site accumulation, off-target localization, drug release and drug efficacy. Clini

  11. Organic Nanovesicular Cargoes for Sustained Drug Delivery: Synthesis, Vesicle Formation, Controlling “Pearling” States, and Terfenadine Loading/Release Studies

    Directory of Open Access Journals (Sweden)

    Ajay Kumar Botcha

    2014-01-01

    Full Text Available “Sustained drug delivery systems” which are designed to accomplish long-lasting therapeutic effect are one of the challenging topics in the area of nanomedicine. We developed an innovative strategy to prepare nontoxic and polymer stabilized organic nanovesicles (diameter: 200 nm from a novel bolaamphiphile, where two hydrogen bonding acetyl cytosine molecules connected to 4,4′′-positions of the 2,6-bispyrazolylpyridine through two flexible octyne chains. The nanovesicles behave like biological membrane by spontaneously self-assembling into “pearl-like” chains and subsequently forming long nanotubes (diameter: 150 nm, which further develop into various types of network-junctions through self-organization. For drug loading and delivery applications, the nanovesicles were externally protected with biocompatible poly(ethyleneglycol-2000 to prevent them from fusion and ensuing tube formation. Nontoxic nature of the nanovesicles was demonstrated by zebrafish teratogenicity assay. Biocompatible nanovesicles were loaded with “terfenadine” drug and successfully utilized to transport and release drug in sustained manner (up to 72 h in zebrafish larvae, which is recognized as an emerging in vivo model system.

  12. Preparation of collagen peptide functionalized chitosan nanoparticles by ionic gelation method: An effective carrier system for encapsulation and release of doxorubicin for cancer drug delivery.

    Science.gov (United States)

    Anandhakumar, S; Krishnamoorthy, G; Ramkumar, K M; Raichur, A M

    2017-01-01

    In recent years, nanoparticles (NPs) based on biopolymers or peptides are gaining popularity for the encapsulation and release of drug molecules, especially for cancer therapy, due to their ability for targeted and controlled release. The use of collagen peptide (CP) for the preparation of chitosan (CN) NPs is especially interesting as it results in NPs that are stable under physiological conditions. In this work, mono-dispersed pH responsive CPCN NPs of about 100nm were prepared via ionic gelation method by simple and mild co-precipitation of CN and CP. Investigation of NPs with Fourier transform infra-red (FTIR) spectroscopy and dynamic light scattering (DLS) measurements reveals that hydrogen bonding and electrostatic interactions are believed to be major driving forces for NP formation and drug encapsulation, respectively. Scanning electron microscopic (SEM) investigations show that hard and fine CPCN NPs transform to soft and bigger gel like particles as a function of collagen concentration. The unique "polymeric gel" structure of NPs showed high encapsulation efficiency towards doxorubicin hydrochloride (DOX) as well as pH controlled release. Anti-proliferative and cell viability analysis revealed that DOX loaded NPs showed excellent anti-proliferative characteristics against HeLa cells with favorable biocompatibility against normal cells. Such NPs have high potential for use as smart drug delivery carriers in advanced cancer therapy. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Glutathione-triggered drug release from nanostructures.

    Science.gov (United States)

    Latorre, Alfonso; Somoza, Álvaro

    2014-01-01

    The delivery of drugs can be improved with the use of different carriers, such as those based on nanoparticles. The nanostructures loaded with the therapeutic molecules should be able to reach the target cells and, what is more, release the drugs efficiently. Ideally, the drugs should be delivered only in the target cells, and not along their way to the cells. For these reasons several approaches have been developed to control the release of the drugs at the desired sites. In this review article we have summarized the reports that describe the use of glutathione to trigger the release of the therapeutic molecules from different nanostructures.

  14. Targeted delivery and pH-responsive release of stereoisomeric anti-cancer drugs using β-cyclodextrin assemblied Fe3O4 nanoparticles

    Science.gov (United States)

    Wang, Congli; Huang, Lizhen; Song, Shengmei; Saif, Bassam; Zhou, Yehong; Dong, Chuan; Shuang, Shaomin

    2015-12-01

    The β-cyclodextrin assemblied magnetic Fe3O4 nanoparticles (β-CD-MNPs) were successfully fabricated via a layer-by-layer method. Possessing an average size 14 nm, good stability and super-paramagnetic response (Ms 64 emu/g), the resultant nanocomposites could be served as a versatile biocompatible platform for selective loading, targeted delivery and pH-responsive release of stereoisomeric doxorubicin (DOX) and epirubicin (EPI). 1H-nuclear magnetic resonance (1H NMR) and the computer simulation further give the evidence that partial anthracene ring of drug molecule is included by β-CD. In addition, non-toxic β-CD-MNPs have excellent biocompatibility on MCF-7 cells, and cellular uptake indicate that different amounts of DOX or EPI can be transported to targeting site and released from the internalized carriers. The results demonstrate that as-prepared β-CD-MNPs could be a very promising vehicle for DOX and EPI.

  15. Microneedles: an emerging transdermal drug delivery system.

    Science.gov (United States)

    Bariya, Shital H; Gohel, Mukesh C; Mehta, Tejal A; Sharma, Om Prakash

    2012-01-01

    One of the thrust areas in drug delivery research is transdermal drug delivery systems (TDDS) due to their characteristic advantages over oral and parenteral drug delivery systems. Researchers have focused their attention on the use of microneedles to overcome the barrier of the stratum corneum. Microneedles deliver the drug into the epidermis without disruption of nerve endings. Recent advances in the development of microneedles are discussed in this review for the benefit of young scientists and to promote research in the area. Microneedles are fabricated using a microelectromechanical system employing silicon, metals, polymers or polysaccharides. Solid coated microneedles can be used to pierce the superficial skin layer followed by delivery of the drug. Advances in microneedle research led to development of dissolvable/degradable and hollow microneedles to deliver drugs at a higher dose and to engineer drug release. Iontophoresis, sonophoresis and electrophoresis can be used to modify drug delivery when used in concern with hollow microneedles. Microneedles can be used to deliver macromolecules such as insulin, growth hormones, immunobiologicals, proteins and peptides. Microneedles containing 'cosmeceuticals' are currently available to treat acne, pigmentation, scars and wrinkles, as well as for skin tone improvement. Literature survey and patents filled revealed that microneedle-based drug delivery system can be explored as a potential tool for the delivery of a variety of macromolecules that are not effectively delivered by conventional transdermal techniques. © 2011 The Authors. JPP © 2011 Royal Pharmaceutical Society.

  16. Light activated liposomes: Functionality and prospects in ocular drug delivery.

    Science.gov (United States)

    Lajunen, Tatu; Nurmi, Riikka; Kontturi, Leena; Viitala, Lauri; Yliperttula, Marjo; Murtomäki, Lasse; Urtti, Arto

    2016-12-28

    Ocular drug delivery, especially to the retina and choroid, is a major challenge in drug development. Liposome technology may be useful in ophthalmology in enabling new routes of delivery, prolongation of drug action and intracellular drug delivery, but drug release from the liposomes should be controlled. For that purpose, light activation may be an approach to release drug at specified time and site in the eye. Technical advances have been made in the field of light activated drug release, particularly indocyanine green loaded liposomes are a promising approach with safe materials and effective light triggered release of small and large molecules. This review discusses the liposomal drug delivery with light activated systems in the context of ophthalmic drug delivery challenges.

  17. Designing hydrogels for controlled drug delivery

    Science.gov (United States)

    Li, Jianyu; Mooney, David J.

    2016-12-01

    Hydrogel delivery systems can leverage therapeutically beneficial outcomes of drug delivery and have found clinical use. Hydrogels can provide spatial and temporal control over the release of various therapeutic agents, including small-molecule drugs, macromolecular drugs and cells. Owing to their tunable physical properties, controllable degradability and capability to protect labile drugs from degradation, hydrogels serve as a platform on which various physiochemical interactions with the encapsulated drugs occur to control drug release. In this Review, we cover multiscale mechanisms underlying the design of hydrogel drug delivery systems, focusing on physical and chemical properties of the hydrogel network and the hydrogel-drug interactions across the network, mesh and molecular (or atomistic) scales. We discuss how different mechanisms interact and can be integrated to exert fine control in time and space over drug presentation. We also collect experimental release data from the literature, review clinical translation to date of these systems and present quantitative comparisons between different systems to provide guidelines for the rational design of hydrogel delivery systems.

  18. Microfluidic synthesis of dye-loaded polycaprolactone-block-poly(ethylene oxide) nanoparticles: Insights into flow-directed loading and in vitro release for drug delivery.

    Science.gov (United States)

    Bains, Aman; Wulff, Jeremy E; Moffitt, Matthew G

    2016-08-01

    Using the fluorescent probe dye 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) as a surrogate for hydrophobic drugs, we investigate the effects of water content and on-chip flow rate on the multiscale structure, loading and release properties of DiI-loaded poly(ε-caprolactone)-block-poly(ethylene oxide) (PCL-b-PEO) nanoparticles produced in a gas-liquid segmented microfluidic device. We find a linear increase in PCL crystallinity within the nanoparticle cores with increasing flow rate, while mean nanoparticle sizes first decrease and then increase with flow rate coincident with the disappearance and reappearance of long filament nanoparticles. Loading efficiencies at the lower water content (cwc+10wt%) are generally higher (up to 94%) compared to loading efficiencies (up to 53%) at the higher water content (cwc+75wt%). In vitro release times range between ∼2 and 4days for nanoparticles produced at cwc+10wt% and >15days for nanoparticles produced at cwc+75wt%. At the lower water content, slower release of DiI is found for nanoparticles produced at higher flow rate, while at high water content, release times first decrease and then increase with flow rate. Finally, we investigate the effects of the chemical and physical characteristics of the release medium on the kinetics of in vitro DiI release and nanoparticle degradation. This work demonstrates the general utility of dye-loaded nanoparticles as model systems for screening chemical and flow conditions for producing drug delivery formulations within microfluidic devices.

  19. Characterizations of plasticized polymeric film coatings for preparing multiple-unit floating drug delivery systems (muFDDSs with controlled-release characteristics.

    Directory of Open Access Journals (Sweden)

    Sheng-Feng Hung

    Full Text Available Effervescent multiple-unit floating drug delivery systems (muFDDSs consisting of drug (lorsartan- and effervescent (sodium bicarbonate-containing pellets were characterized in this study. The mechanical properties (stress and strain at rupture, Young's modulus, and toughness of these plasticized polymeric films of acrylic (Eudragit RS, RL, and NE and cellulosic materials (ethyl cellulose (EC, and Surelease were examined by a dynamic mechanical analyzer. Results demonstrated that polymeric films prepared from Surelease and EC were brittle with less elongation compared to acrylic films. Eudragit NE films were very flexible in both the dry and wet states. Because plasticizer leached from polymeric films during exposure to the aqueous medium, plasticization of wet Eudragit RS and RL films with 15% triethyl citrate (TEC or diethyl phthalate (DEP resulted in less elongation. DEP might be the plasticizer of choice among the plasticizers examined in this study for Eudragit RL to provide muFDDSs with a short time for all pellets to float (TPF and a longer period of floating. Eudragit RL and RS at a 1∶1 ratio plasticized with 15% DEP were optimally selected as the coating membrane for the floating system. Although the release of losartan from the pellets was still too fast as a result of losartan being freely soluble in water, muFDDSs coated with Eudragit RL and RS at a 1∶1 ratio might have potential use for the sustained release of water-insoluble or the un-ionized form of drugs from gastroretentive drug delivery systems.

  20. Characterization of gelation process and drug release profile of thermosensitive liquid lecithin/poloxamer 407 based gels as carriers for percutaneous delivery of ibuprofen.

    Science.gov (United States)

    Djekic, Ljiljana; Krajisnik, Danina; Martinovic, Martina; Djordjevic, Dragana; Primorac, Marija

    2015-07-25

    Suitability of liquid lecithin (i.e., solution of lecithin in soy bean oil with ∼ 60% w/w of phospholipids) for formation of gels, upon addition of water solution of poloxamer 407, was investigated, and formulated systems were evaluated as carriers for percutaneous delivery of ibuprofen. Formulation study of pseudo-ternary system liquid lecithin/poloxamer 407/water at constant liquid lecithin/poloxamer 407 mass ratio (2.0) revealed that minimum concentrations of liquid lecithin and poloxamer 407 required for formation of gel like systems were 15.75% w/w and 13.13% w/w, respectively, while the maximum content of water was 60.62% w/w. The systems comprising water concentrations in a range from 55 to 60.62% w/w were soft semisolids suitable for topical application, and they were selected for physicochemical and biopharmaceutical evaluation. Analysis of conductivity results and light microscopy examination revealed that investigated systems were water dilutable dispersions of spherical oligolamellar associates of phospholipids and triglyceride molecules in the copolymer water solution. Rheological behavior evaluation results indicated that the investigated gels were thermosensitive shear thinning systems. Ibuprofen (5% w/w) was incorporated by dispersing into the previously prepared carriers. Drug-loaded systems were physically stable at storage temperature from 5 ± 3°C to 40 ± 2°C, for 30 days. In vitro ibuprofen release was in accordance with the Higuchi model (rH>0.95) and sustained for 12h. The obtained results implicated that formulated LLPBGs, optimized regarding drug release and organoleptic properties, represent promising carriers for sustained percutaneous drug delivery of poorly soluble drugs. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Optimizing drugs for local delivery.

    Science.gov (United States)

    Collingwood, S; Lock, R; Searcey, M

    2009-12-01

    An international panel of speakers together with approximately 70 delegates were brought together by The Society for Medicines Research's symposium on Optimising Drugs for Local Delivery, held on June 11, 2009 at the Novartis Institutes for Biomedical Research, Horsham, UK. The focus of the conference was on the delivery of drugs direct to the site of action and the consequences of this delivery route on delivery technologies, formulation science and molecular design.

  2. Microprocessor controlled transdermal drug delivery.

    Science.gov (United States)

    Subramony, J Anand; Sharma, Ashutosh; Phipps, J B

    2006-07-06

    Transdermal drug delivery via iontophoresis is reviewed with special focus on the delivery of lidocaine for local anesthesia and fentanyl for patient controlled acute therapy such as postoperative pain. The role of the microprocessor controller in achieving dosimetry, alternating/reverse polarity, pre-programmed, and sensor-based delivery is highlighted. Unique features such as the use of tactile signaling, telemetry control, and pulsatile waveforms in iontophoretic drug delivery are described briefly.

  3. Targeted delivery and pH-responsive release of stereoisomeric anti-cancer drugs using β-cyclodextrin assemblied Fe{sub 3}O{sub 4} nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Congli; Huang, Lizhen; Song, Shengmei; Saif, Bassam; Zhou, Yehong; Dong, Chuan; Shuang, Shaomin, E-mail: smshuang@sxu.edu.cn

    2015-12-01

    Graphical abstract: - Highlights: • β-Cyclodextrin assemblied magnetic Fe{sub 3}O{sub 4} nanoparticles (β-CD-MNPs) with good stability were successfully fabricated. • Stereoisomeric doxorubicin (DOX) and epirubicin (EPI) were used to explore the loading and release performance. • The loading properties of β-CD-MNPs were investigated using the Langmuir and Freundlich adsorption equilibrium models. • {sup 1}H NMR and the computer simulation were used to demonstrate the inclusion position between drug molecules and β-CD. - Abstract: The β-cyclodextrin assemblied magnetic Fe{sub 3}O{sub 4} nanoparticles (β-CD-MNPs) were successfully fabricated via a layer-by-layer method. Possessing an average size 14 nm, good stability and super-paramagnetic response (Ms 64 emu/g), the resultant nanocomposites could be served as a versatile biocompatible platform for selective loading, targeted delivery and pH-responsive release of stereoisomeric doxorubicin (DOX) and epirubicin (EPI). {sup 1}H-nuclear magnetic resonance ({sup 1}H NMR) and the computer simulation further give the evidence that partial anthracene ring of drug molecule is included by β-CD. In addition, non-toxic β-CD-MNPs have excellent biocompatibility on MCF-7 cells, and cellular uptake indicate that different amounts of DOX or EPI can be transported to targeting site and released from the internalized carriers. The results demonstrate that as-prepared β-CD-MNPs could be a very promising vehicle for DOX and EPI.

  4. A biodegradable, sustained-released, prednisolone acetate microfilm drug delivery system effectively prolongs corneal allograft survival in the rat keratoplasty model.

    Directory of Open Access Journals (Sweden)

    Yu-Chi Liu

    Full Text Available Frequent and long-term use of topical corticosteroids after corneal transplantation is necessary to prevent graft rejection. However, it relies heavily on patient compliance, and sustained therapeutic drug levels are often not achieved with administration of topical eye drops. A biodegradable drug delivery system with a controlled and sustained drug release may circumvent these limitations. In this study, we investigated the efficacy of a prednisolone acetate (PA-loaded poly (d,l-lactide-co-ε-caprolactone (PLC microfilm drug delivery system on promoting the survival of allogeneic grafts after penetrating keratoplasty (PK using a rat model. The drug release profiles of the microfilms were characterized (group 1. Subsequently, forty-eight PK were performed in four experimental groups: syngeneic control grafts (group 2, allogeneic control grafts (group 3, allogeneic grafts with subconjunctivally-implanted PA microfilm (group 4, and allogeneic grafts with PA eye drops (group 5; n = 12 in each. PA-loaded microfilm achieved a sustained and steady release at a rate of 0.006-0.009 mg/day, with a consistent aqueous drug concentration of 207-209 ng/ml. The mean survival days was >28 days in group 2, 9.9±0.8 days in group 3, 26.8±2.7 days in group 4, and 26.4±3.4 days in group 5 (P = 0.023 and P = 0.027 compared with group 3. Statistically significant decrease in CD4+, CD163+, CD 25+, and CD54+ cell infiltration was observed in group 4 and group 5 compared with group 3 (P<0.001. There was no significant difference in the mean survival and immunohistochemical analysis between group 4 and group 5. These results showed that sustained PA-loaded microfilm effectively prolongs corneal allograft survival. It is as effective as conventional PA eye drops, providing a promising clinically applicable alternative for patients undergoing corneal transplantation.

  5. Smart polymers in nasal drug delivery

    Directory of Open Access Journals (Sweden)

    Ankita Chonkar

    2015-01-01

    Full Text Available Nasal drug delivery has now been recognized as a promising route for drug delivery due to its capability of transporting a drug to systemic circulation and central nervous system. Though nasal mucosa offers improved bioavailability and quick onset of action of the drug, main disadvantage associated with nasal drug delivery is mucocilliary clearance due to which drug particles get cleared from the nose before complete absorption through nasal mucosa. Therefore, mucoadhesive polymeric approach can be successfully used to enhance the retention of the drug on nasal mucosal surface. Here, some of the aspects of the stimuli responsive polymers have been discussed which possess liquid state at the room temperature and in response to nasal temperature, pH and ions present in mucous, can undergo in situ gelation in nasal cavity. In this review, several temperature responsive, pH responsive and ion responsive polymers used in nasal delivery, their gelling mechanisms have been discussed. Smart polymers not only able to enhance the retention of the drug in nasal cavity but also provide controlled release, ease of administration, enhanced permeation of the drug and protection of the drug from mucosal enzymes. Thus smart polymeric approach can be effectively used for nasal delivery of peptide drugs, central nervous system dugs and hormones.

  6. Emulsomes: An emerging vesicular drug delivery system

    Directory of Open Access Journals (Sweden)

    Bhawandeep Gill

    2012-01-01

    Full Text Available The oral route is the easiest, cost effective, and most vital method for drug administration. Therefore, improvement of dosage forms mainly for the prolonged release purpose has been a challenge for scientists. Vesicular drug delivery systems are developed with a purpose to overcome problems coupled with the drugs such a poor bioavailability, protection from harsh gastric environment, and from gastric enzymes, which degrade the drug. Vesicular drug delivery systems such as liposomes, emulsions, niosomes, proniosomes, solid lipid-nano particles, ethosomes, nanoparticles, and pharmacosomes, etc have gained much attention, but emulsomes have rouse as system, which bypasses many disadvantages associated with other systems, developed as novel lipoidal vesicular system with internal solid fat core surrounded by phospholipid bilayer. This technology is designed to act as vehicle for poorly soluble drugs. The drug is enclosed in the emulsomes and provide prolong existence of drug in systemic circulation. Furthermore, emulsomal-based formulations of genetic drugs such as antisense oligonucleotides and plasmids for gene therapy that have clear potential for systemic utility are increasingly available. This review addresses the concept of emulsomal drug delivery system, summarizes the success of emulsomes for the delivery of small molecules, and special attention has been paid to its formulation design, advantages, biopharmaceutical aspects, stability aspects, and various aspects related to drug delivery including future aspects.

  7. RECENT TRENDS IN DENTAL DRUG DELIVERY SYSTEMS

    Directory of Open Access Journals (Sweden)

    Sharma Nishu

    2013-07-01

    Full Text Available Controlled release local drug delivery systems offer advantages compared to systemic dosage forms for many dental diseases like gingivitis, periodontitis. The objective of this literature survey was to gain knowledge about various dental drug delivery systems for targeted delivery of the drug. The polymer ethyl cellulose was used in the formulation of dental films. The dental film was then evaluated for various parameters like thickness, folding endurance and weight variation and content uniformity, in vitro and in vivo study. There has been a great attention in using iontophoretic technique for the transdermal drug delivery of medications, both ionic and non ionic. This technique of facilitated movement of ions across a membrane under the influence of an externally applied electric potential difference is one of the most promising physical skin penetrations enhancing method. Another novel approach is the use of lasers in dentistry. Lasers can be used in both hard and soft tissue applications including laser bleaching, frenectomy, gingivectomy, caries removal etc. Drugs delivery via the buccal routs using bio adhesive dosage forms offers such a novel route of drugs administration. This route has been used successfully for the systematic delivery of number of drugs candidates. Problems such as high first pass metabolisms and drugs degradation in the gastrointestinal tract can be circumvented by administrating the drug buccal routes.

  8. MICROENCAPSULATION: AN INDISPENSABLE TECHNOLOGY FOR DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Malakar Jadupati

    2012-04-01

    Full Text Available In this review, the various new and well established technologies relevant to the controlled and targeted drug delivery systems have been precisely discussed. A perfectly designed controlled drug delivery system can be of huge advantage towards solving problems concerning to the targeting of drug to a specific organ or tissue and controlling the rate of drug delivery at the target site. Novel drug delivery systems have various advantages over other conventional drug therapy. In which microencapsulation is one approach for achieving the novel drug delivery dosage forms such as sustained release and controlled release, though the development of oral controlled release systems has been a challenge to formulation scientist due to their inability to restrain and focus the system at targeted areas of gastrointestinal tract. Microparticulate drug delivery systems are an interesting and promising option when developing an oral controlled release system. Our objective is to take a closer look at microparticles as drug delivery devices for increasing efficiency of drug delivery, improving the release profile and drug targeting. In order to elucidate the application of microcapsules in drug delivery, some fundamental aspects are briefly reviewed.

  9. Si-modified BHA bioceramics as a drug delivery system: Effect of modification method on structure and Rifampicin release

    Directory of Open Access Journals (Sweden)

    Olena Sych

    2015-09-01

    Full Text Available The work is devoted to the investigation of two different methods for introduction of silicon into ceramics, based on biogenic hydroxyapatite (BHA, on the structure and properties. Thus, porous samples of Si-modified BHA-based ceramics containing 2 or 5 wt.% Si were prepared by using two different precursors, i.e. polymethylsiloxane polyhydrate and fine silica (Aerosil® 200 powder. After the modification with silicon a marked change in the structure of material was observed. The use of Aerosil® 200 permits preparation of a more uniform structure as compared to that obtained by using polymethylsiloxane polyhydrate. However, the latter promotes an increase in both the porosity of samples (from 43 to 62.3% and their solubility in saline (from 0.18 to 1.20 wt.%/day as compared to the results obtained after the modification with Aerosil® 200, where maximal porosity and solubility were 48.5% and 0.23 wt.%/day, respectively. At the same time, the modification of hydroxyapatite ceramics with silicon using silica makes it possible to prolong release of a drug (e.g. Rifampicin out of sample pores for the first 24 h as compared to the ceramics modified with polymethylsiloxane polyhydrate.

  10. Polysaccharides for the Delivery of Antitumor Drugs

    Directory of Open Access Journals (Sweden)

    Bianca Posocco

    2015-05-01

    Full Text Available Among the several delivery materials available so far, polysaccharides represent very attractive molecules as they can undergo a wide range of chemical modifications, are biocompatible, biodegradable, and have low immunogenic properties. Thus, polysaccharides can contribute to significantly overcome the limitation in the use of many types of drugs, including anti-cancer drugs. The use of conventional anti-cancer drugs is hampered by their high toxicity, mostly depending on the indiscriminate targeting of both cancer and normal cells. Additionally, for nucleic acid based drugs (NABDs, an emerging class of drugs with potential anti-cancer value, the practical use is problematic. This mostly depends on their fast degradation in biological fluids and the difficulties to cross cell membranes. Thus, for both classes of drugs, the development of optimal delivery materials is crucial. Here we discuss the possibility of using different kinds of polysaccharides, such as chitosan, hyaluronic acid, dextran, and pullulan, as smart drug delivery materials. We first describe the main features of polysaccharides, then a general overview about the aspects ruling drug release mechanisms and the pharmacokinetic are reported. Finally, notable examples of polysaccharide-based delivery of conventional anti-cancer drugs and NABDs are reported. Whereas additional research is required, the promising results obtained so far, fully justify further efforts, both in terms of economic support and investigations in the field of polysaccharides as drug delivery materials.

  11. Plasmon resonant liposomes for controlled drug delivery

    Science.gov (United States)

    Knights-Mitchell, Shellie S.; Romanowski, Marek

    2015-03-01

    Nanotechnology use in drug delivery promotes a reduction in systemic toxicity, improved pharmacokinetics, and better drug bioavailability. Liposomes continue to be extensively researched as drug delivery systems (DDS) with formulations such as Doxil® and Ambisome® approved by FDA and successfully marketed in the United States. However, the limited ability to precisely control release of active ingredients from these vesicles continues to challenge the broad implementation of this technology. Moreover, the full potential of the carrier to sequester drugs until it can reach its intended target has yet to be realized. Here, we describe a liposomal DDS that releases therapeutic doses of an anticancer drug in response to external stimulus. Earlier, we introduced degradable plasmon resonant liposomes. These constructs, obtained by reducing gold on the liposome surface, facilitate spatial and temporal release of drugs upon laser light illumination that ultimately induces an increase in temperature. In this work, plasmon resonant liposomes have been developed to stably encapsulate and retain doxorubicin at physiological conditions represented by isotonic saline at 37o C and pH 7.4. Subsequently, they are stimulated to release contents either by a 5o C increase in temperature or by laser illumination (760 nm and 88 mW/cm2 power density). Successful development of degradable plasmon resonant liposomes responsive to near-infrared light or moderate hyperthermia can provide a new delivery method for multiple lipophilic and hydrophilic drugs with pharmacokinetic profiles that limit clinical utility.

  12. Cyclodextrins for drug delivery.

    Science.gov (United States)

    Laza-Knoerr, A L; Gref, R; Couvreur, P

    2010-11-01

    Cyclodextrins (CDs) are macrocyclic oligosaccharides composed of α(1,4)-linked glucopyranose subunits. These molecules possess a cage-like supramolecular structure, comparable with the structures of crown ethers, cryptands, spherands, cyclophanes, or calixarenes. However, it took 50 years to establish the molecular structure of CDs. Owing to their capability to form inclusion complexes with a variety of guest molecules, CDs are considered as the most important supramolecular host family among all supramolecular structures mentioned above. They can form complexes with various types of molecules including inorganic, organic, or organometallic that can be radical, cationic, anionic, or neutral molecules. This phenomenon bears the name "molecular recognition," while the selectivity in the formation of complexes with enantiomeric species as guests is called "chiral recognition." In addition, the properties of the molecules forming the complexes with CDs can be modified significantly. As such, a large number of scientists have attempted to elaborate and evaluate various CD derivatives that are able to complex a variety of drugs, enhancing by this way their in vivo solubility and activity. Moreover, a large number of publications describe CD uses in other fields such as foods, textile, cosmetics, or agriculture. This review reports on the recent developments of CDs in drug delivery using various routes of administration.

  13. Nanofibers for drug delivery - incorporation and release of model molecules, influence of molecular weight and polymer structure.

    Science.gov (United States)

    Hrib, Jakub; Sirc, Jakub; Hobzova, Radka; Hampejsova, Zuzana; Bosakova, Zuzana; Munzarova, Marcela; Michalek, Jiri

    2015-01-01

    Nanofibers were prepared from polycaprolactone, polylactide and polyvinyl alcohol using Nanospider(TM) technology. Polyethylene glycols with molecular weights of 2 000, 6 000, 10 000 and 20 000 g/mol, which can be used to moderate the release profile of incorporated pharmacologically active compounds, served as model molecules. They were terminated by aromatic isocyanate and incorporated into the nanofibers. The release of these molecules into an aqueous environment was investigated. The influences of the molecular length and chemical composition of the nanofibers on the release rate and the amount of released polyethylene glycols were evaluated. Longer molecules released faster, as evidenced by a significantly higher amount of released molecules after 72 hours. However, the influence of the chemical composition of nanofibers was even more distinct - the highest amount of polyethylene glycol molecules released from polyvinyl alcohol nanofibers, the lowest amount from polylactide nanofibers.

  14. Nanofibers for drug delivery – incorporation and release of model molecules, influence of molecular weight and polymer structure

    Directory of Open Access Journals (Sweden)

    Jakub Hrib

    2015-09-01

    Full Text Available Nanofibers were prepared from polycaprolactone, polylactide and polyvinyl alcohol using NanospiderTM technology. Polyethylene glycols with molecular weights of 2 000, 6 000, 10 000 and 20 000 g/mol, which can be used to moderate the release profile of incorporated pharmacologically active compounds, served as model molecules. They were terminated by aromatic isocyanate and incorporated into the nanofibers. The release of these molecules into an aqueous environment was investigated. The influences of the molecular length and chemical composition of the nanofibers on the release rate and the amount of released polyethylene glycols were evaluated. Longer molecules released faster, as evidenced by a significantly higher amount of released molecules after 72 hours. However, the influence of the chemical composition of nanofibers was even more distinct – the highest amount of polyethylene glycol molecules released from polyvinyl alcohol nanofibers, the lowest amount from polylactide nanofibers.

  15. Molecular imprinted polymers as drug delivery vehicles.

    Science.gov (United States)

    Zaidi, Shabi Abbas

    2016-09-01

    This review is aimed to discuss the molecular imprinted polymer (MIP)-based drug delivery systems (DDS). Molecular imprinted polymers have proved to possess the potential and also as a suitable material in several areas over a long period of time. However, only recently it has been employed for pharmaceuticals and biomedical applications, particularly as drug delivery vehicles due to properties including selective recognition generated from imprinting the desired analyte, favorable in harsh experimental conditions, and feedback-controlled recognitive drug release. Hence, this review will discuss their synthesis, the reason they are selected as drug delivery vehicles and for their applications in several drug administration routes (i.e. transdermal, ocular and gastrointestinal or stimuli-reactive routes).

  16. A cyclically actuated electrolytic drug delivery device

    KAUST Repository

    Yi, Ying

    2015-01-01

    This work, focusing on an implantable drug delivery system, presents the first prototype electrolytic pump that combines a catalytic reformer and a cyclically actuated mode. These features improve the release performance and extend the lifetime of the device. Using our platinum (Pt)-coated carbon fiber mesh that acts as a catalytic reforming element, the cyclical mode is improved because the faster recombination rate allows for a shorter cycling time for drug delivery. Another feature of our device is that it uses a solid-drug-in-reservoir (SDR) approach, which allows small amounts of a solid drug to be dissolved in human fluid, forming a reproducible drug solution for long-term therapies. We have conducted proof-of-principle drug delivery studies using such an electrolytic pump and solvent blue 38 as the drug substitute. These tests demonstrate power-controlled and pulsatile release profiles of the chemical substance, as well as the feasibility of this device. A drug delivery rate of 11.44 ± 0.56 μg min-1 was achieved by using an input power of 4 mW for multiple pulses, which indicates the stability of our system. © The Royal Society of Chemistry 2015.

  17. Genetically engineered nanocarriers for drug delivery

    Directory of Open Access Journals (Sweden)

    Shi P

    2014-03-01

    Full Text Available Pu Shi, Joshua A Gustafson, J Andrew MacKayDepartment of Pharmacology and Pharmaceutical Sciences, University of Southern California, Los Angeles, CA, USAAbstract: Cytotoxicity, low water solubility, rapid clearance from circulation, and off-target side-effects are common drawbacks of conventional small-molecule drugs. To overcome these shortcomings, many multifunctional nanocarriers have been proposed to enhance drug delivery. In concept, multifunctional nanoparticles might carry multiple agents, control release rate, biodegrade, and utilize target-mediated drug delivery; however, the design of these particles presents many challenges at the stage of pharmaceutical development. An emerging solution to improve control over these particles is to turn to genetic engineering. Genetically engineered nanocarriers are precisely controlled in size and structure and can provide specific control over sites for chemical attachment of drugs. Genetically engineered drug carriers that assemble nanostructures including nanoparticles and nanofibers can be polymeric or non-polymeric. This review summarizes the recent development of applications in drug and gene delivery utilizing nanostructures of polymeric genetically engineered drug carriers such as elastin-like polypeptides, silk-like polypeptides, and silk-elastin-like protein polymers, and non-polymeric genetically engineered drug carriers such as vault proteins and viral proteins.Keywords: polymeric drug carrier, non-polymeric drug carrier, gene delivery, GE drug carriers

  18. A pulsed mode electrolytic drug delivery device

    KAUST Repository

    Yi, Ying

    2015-09-14

    This paper reports the design of a proof-of-concept drug delivery device that is actuated using the bubbles formed during electrolysis. The device uses a platinum (Pt) coated nickel (Ni) metal foam and a solid drug in reservoir (SDR) approach to improve the device\\'s performance. This electrochemically-driven pump has many features that are unlike conventional drug delivery devices: it is capable of pumping periodically and being refilled automatically; it features drug release control; and it enables targeted delivery. Pt-coated metal foam is used as a catalytic reforming element, which reduces the period of each delivery cycle. Two methods were used for fabricating the Pt-coated metal: sputtering and electroplating. Of these two methods, the sputtered Pt-coated metal foam has a higher pumping rate; it also has a comparable recombination rate when compared to the electroplated Pt-coated metal foam. The only drawback of this catalytic reformer is that it consumes nickel scaffold. Considering long-term applications, the electroplated Pt metal foam was selected for drug delivery, where a controlled drug release rate of 2.2 μg ± 0.3 μg per actuation pulse was achieved using 4 mW of power.

  19. Ingestion of drugs by "parachuting": a unique drug delivery technique.

    Science.gov (United States)

    Kenerson, Katherine L; Lear-Kaul, Kelly C

    2012-06-01

    "Parachuting" is a technique of drug delivery where medications or illicit drugs are ingested by wrapping the drug of choice in a covering, which then will dissolve or unravel in the gastrointestinal tract, thereby releasing the drug for absorption. Parachuting of drugs can entail crushing of a pill prior to packaging to theoretically increase the surface area for absorption or may involve the packaging of a higher than usual dose of a drug in attempts to attain a sustained-release effect as the "parachute" dissolves or unravels. A case is presented in which a prescription drug abuser known to parachute his medications dies from obstruction of his airway by the inhaled packet. Risks of parachuting any drug would include overdose and fatal toxic effect from the drug itself and adverse effects from the packaging including bowel obstruction or perforation, or airway obstruction.

  20. Oral Drug Delivery Systems Comprising Altered Geometric Configurations for Controlled Drug Delivery

    Directory of Open Access Journals (Sweden)

    Priya Bawa

    2011-12-01

    Full Text Available Recent pharmaceutical research has focused on controlled drug delivery having an advantage over conventional methods. Adequate controlled plasma drug levels, reduced side effects as well as improved patient compliance are some of the benefits that these systems may offer. Controlled delivery systems that can provide zero-order drug delivery have the potential for maximizing efficacy while minimizing dose frequency and toxicity. Thus, zero-order drug release is ideal in a large area of drug delivery which has therefore led to the development of various technologies with such drug release patterns. Systems such as multilayered tablets and other geometrically altered devices have been created to perform this function. One of the principles of multilayered tablets involves creating a constant surface area for release. Polymeric materials play an important role in the functioning of these systems. Technologies developed to date include among others: Geomatrix® multilayered tablets, which utilizes specific polymers that may act as barriers to control drug release; Procise®, which has a core with an aperture that can be modified to achieve various types of drug release; core-in-cup tablets, where the core matrix is coated on one surface while the circumference forms a cup around it; donut-shaped devices, which possess a centrally-placed aperture hole and Dome Matrix® as well as “release modules assemblage”, which can offer alternating drug release patterns. This review discusses the novel altered geometric system technologies that have been developed to provide controlled drug release, also focusing on polymers that have been employed in such developments.

  1. Nanosuspension Technology for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Jiraporn CHINGUNPITUK

    2007-06-01

    Full Text Available The poor water solubility of drugs is major problem for drug formulation. To date, nanoscale systems for drug delivery have gained much interest as a way to improve the solubility problems. The reduction of drug particles into the sub-micron range leads to a significant increase in the dissolution rate and therefore enhances bioavailability. Nanosuspensions are promising candidates that can be used for enhancing the dissolution of poorly water soluble drugs. Nanosuspensions contain submicron colloidal dispersion of pharmaceutical active ingredient particles in a liquid phase stabilized by surfactants. Production of drugs as nanosuspensions has been developed for drug delivery systems as an oral formulation and non-oral administration. This review describes the methods of pharmaceutical nanosuspension production, formulations and pharmaceutical applications in drug delivery as well as the marketed products.

  2. Drug Delivery Research: The Invention Cycle.

    Science.gov (United States)

    Park, Kinam

    2016-07-05

    Controlled drug delivery systems have been successful in introducing improved formulations for better use of existing drugs and novel delivery of biologicals. The initial success of producing many oral products and some injectable depot formulations, however, reached a plateau, and the progress over the past three decades has been slow. This is likely due to the difficulties of formulating hydrophilic, high molecular weight drugs, such as proteins and nucleic acids, for targeting specific cells, month-long sustained delivery, and pulsatile release. Since the approaches that have served well for delivery of small molecules are not applicable to large molecules, it is time to develop new methods for biologicals. The process of developing future drug delivery systems, termed as the invention cycle, is proposed, and it starts with clearly defining the problems for developing certain formulations. Once the problems are well-defined, creative imagination examines all potential options and selects the best answer and alternatives. Then, innovation takes over to generate unique solutions for developing new formulations that resolve the previously identified problems. Ultimately, the new delivery systems will have to go through a translational process to produce the final formulations for clinical use. The invention cycle also emphasizes examining the reasons for success of certain formulations, not just the reasons for failure of many systems. Implementation of the new invention cycle requires new mechanisms of funding the younger generation of scientists and a new way of identifying their achievements, thereby releasing them from the burden of short-termism.

  3. Organoclays for drug delivery Systems

    OpenAIRE

    Canovas Creus, Alba

    2008-01-01

    Modified clays can be used as carriers of drugs due to their suitable properties and structure in order to achieve improvements in drug delivery. The study of this thesis starts with an introduction to mineral clays and its classification, properties and characterization, then deepens into modified clays (properties, comparison with mineral clays, applications and procedure of modification). Another chapter is focused in drug delivery: definition, its difficulties nowadays and the different w...

  4. Controlled drug delivery systems: past forward and future back.

    Science.gov (United States)

    Park, Kinam

    2014-09-28

    Controlled drug delivery technology has progressed over the last six decades. This progression began in 1952 with the introduction of the first sustained release formulation. The 1st generation of drug delivery (1950-1980) focused on developing oral and transdermal sustained release systems and establishing controlled drug release mechanisms. The 2nd generation (1980-2010) was dedicated to the development of zero-order release systems, self-regulated drug delivery systems, long-term depot formulations, and nanotechnology-based delivery systems. The latter part of the 2nd generation was largely focused on studying nanoparticle formulations. The Journal of Controlled Release (JCR) has played a pivotal role in the 2nd generation of drug delivery technologies, and it will continue playing a leading role in the next generation. The best path towards a productive 3rd generation of drug delivery technology requires an honest, open dialog without any preconceived ideas of the past. The drug delivery field needs to take a bold approach to designing future drug delivery formulations primarily based on today's necessities, to produce the necessary innovations. The JCR provides a forum for sharing the new ideas that will shape the 3rd generation of drug delivery technology.

  5. Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs

    DEFF Research Database (Denmark)

    Christophersen, Philip Carsten; Fano, Mathias; Saaby, Lasse;

    2015-01-01

    are summarized. Additionally, the paper provides an overview of recent studies on characterization of solid drug carriers for peptide/protein drugs, drug distribution in particles, drug release and stability in simulated GI fluids, as well as the absorption of peptide/protein drugs in cell-based models. The use......Oral drug delivery is a preferred route because of good patient compliance. However, most peptide/ protein drugs are delivered via parenteral routes because of the absorption barriers in the gastrointestinal (GI) tract such as enzymatic degradation by proteases and low permeability acrossthe...... biological membranes. To overcome these barriers, different formulation strategies for oral delivery of biomacromolecules have been proposed, including lipid based formulations and polymer-based particulate drug delivery systems (DDS). The aim of this review is to summarize the existing knowledge about oral...

  6. Intracranial drug delivery for subarachnoid hemorrhage.

    Science.gov (United States)

    Macdonald, Robert Loch; Leung, Ming; Tice, Tom

    2012-01-01

    Tice and colleagues pioneered site-specific, sustained-release drug delivery to the brain almost 30 years ago. Currently there is one drug approved for use in this manner. Clinical trials in subarachnoid hemorrhage have led to approval of nimodipine for oral and intravenous use, but other drugs, such as clazosentan, hydroxymethylglutaryl CoA reductase inhibitors (statins) and magnesium, have not shown consistent clinical efficacy. We propose that intracranial delivery of drugs such as nimodipine, formulated in sustained-release preparations, are good candidates for improving outcome after subarachnoid hemorrhage because they can be administered to patients that are already undergoing surgery and who have a self-limited condition from which full recovery is possible.

  7. Biodegradable Hybrid Stomatocyte Nanomotors for Drug Delivery.

    Science.gov (United States)

    Tu, Yingfeng; Peng, Fei; André, Alain A M; Men, Yongjun; Srinivas, Mangala; Wilson, Daniela A

    2017-02-28

    We report the self-assembly of a biodegradable platinum nanoparticle-loaded stomatocyte nanomotor containing both PEG-b-PCL and PEG-b-PS as a potential candidate for anticancer drug delivery. Well-defined stomatocyte structures could be formed even after incorporation of 50% PEG-b-PCL polymer. Demixing of the two polymers was expected at high percentage of semicrystalline poly(ε-caprolactone) (PCL), resulting in PCL domain formation onto the membrane due to different properties of two polymers. The biodegradable motor system was further shown to move directionally with speeds up to 39 μm/s by converting chemical fuel, hydrogen peroxide, into mechanical motion as well as rapidly delivering the drug to the targeted cancer cell. Uptake by cancer cells and fast doxorubicin drug release was demonstrated during the degradation of the motor system. Such biodegradable nanomotors provide a convenient and efficient platform for the delivery and controlled release of therapeutic drugs.

  8. Neutron activation-based gamma scintigraphy in pharmacoscintigraphic evaluation of an Egalet constant-release drug delivery system.

    Science.gov (United States)

    Marvola, Janne; Kanerva, Hanna; Slot, Lillian; Lipponen, Maija; Kekki, Tommi; Hietanen, Heikki; Mykkänen, Sirpa; Ariniemi, Kari; Lindevall, Kai; Marvola, Martti

    2004-08-20

    This paper is a report from a pharmacoscintigraphic study with an Egalet constant-release system containing caffeine and natural abundance samarium oxide. First the formulation was tested in vitro to clarify integrity during irradiation in the nuclear reactor. Then six healthy male volunteers were enrolled into the in vivo study. The in vitro release of caffeine obeyed all the time linear zero-order kinetics. The in vivo release of radioactive Sm2O3 consisted of three consequent linear phases with different slopes. The release rate was fastest while the product was in the small intestine and slowest when the product was in the descending colon. In terms of the bioavailability of caffeine, the most important factor seemed to be the residence time in the ascending and transverse colon. A long residence time in these sections led to high AUC values for caffeine.

  9. Nanofibers for drug delivery – incorporation and release of model molecules, influence of molecular weight and polymer structure

    OpenAIRE

    2015-01-01

    Nanofibers were prepared from polycaprolactone, polylactide and polyvinyl alcohol using NanospiderTM technology. Polyethylene glycols with molecular weights of 2 000, 6 000, 10 000 and 20 000 g/mol, which can be used to moderate the release profile of incorporated pharmacologically active compounds, served as model molecules. They were terminated by aromatic isocyanate and incorporated into the nanofibers. The release of these molecules into an aqueous environment was investigated. The influe...

  10. Computational Amphiphilic Materials for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Naresh eThota

    2015-10-01

    Full Text Available Amphiphilic materials can assemble into a wide variety of morphologies and have emerged as a novel class of candidates for drug delivery. Along with a large number of experiments reported, computational studies have been also conducted in this field. At an atomistic/molecular level, computations can facilitate quantitative understanding of experimental observations and secure fundamental interpretation of underlying phenomena. This review summarizes the recent computational efforts on amphiphilic copolymers and peptides for drug delivery. Atom-resolution and time-resolved insights are provided from bottom-up to microscopically elucidate the mechanisms of drug loading/release, which are indispensable in the rational screening and design of new amphiphiles for high-efficacy drug delivery.

  11. Trigger release liposome systems: local and remote controlled delivery?

    Science.gov (United States)

    Bibi, Sagida; Lattmann, E; Mohammed, Afzal R; Perrie, Yvonne

    2012-01-01

    Target-specific delivery has become an integral area of research in order to increase bioavailability and reduce the toxic effects of drugs. As a drug-delivery option, trigger-release liposomes offer sophisticated targeting and greater control-release capabilities. These are broadly divided into two categories; those that utilise the local environment of the target site where there may be an upregulation in certain enzymes or a change in pH and those liposomes that are triggered by an external physical stimulus such as heat, ultrasound or light. These release mechanisms offer a greater degree of control over when and where the drug is released; furthermore, targeting of diseased tissue is enhanced by incorporation of target-specific components such as antibodies. This review aims to show the development of such trigger release liposome systems and the current research in this field.

  12. Understanding Drug Release Data through Thermodynamic Analysis

    Directory of Open Access Journals (Sweden)

    Marjorie Caroline Liberato Cavalcanti Freire

    2017-06-01

    Full Text Available Understanding the factors that can modify the drug release profile of a drug from a Drug-Delivery-System (DDS is a mandatory step to determine the effectiveness of new therapies. The aim of this study was to assess the Amphotericin-B (AmB kinetic release profiles from polymeric systems with different compositions and geometries and to correlate these profiles with the thermodynamic parameters through mathematical modeling. Film casting and electrospinning techniques were used to compare behavior of films and fibers, respectively. Release profiles from the DDSs were performed, and the mathematical modeling of the data was carried out. Activation energy, enthalpy, entropy and Gibbs free energy of the drug release process were determined. AmB release profiles showed that the relationship to overcome the enthalpic barrier was PVA-fiber > PVA-film > PLA-fiber > PLA-film. Drug release kinetics from the fibers and the films were better fitted on the Peppas–Sahlin and Higuchi models, respectively. The thermodynamic parameters corroborate these findings, revealing that the AmB release from the evaluated systems was an endothermic and non-spontaneous process. Thermodynamic parameters can be used to explain the drug kinetic release profiles. Such an approach is of utmost importance for DDS containing insoluble compounds, such as AmB, which is associated with an erratic bioavailability.

  13. The Research Progress of Targeted Drug Delivery Systems

    Science.gov (United States)

    Zhan, Jiayin; Ting, Xizi Liang; Zhu, Junjie

    2017-06-01

    Targeted drug delivery system (DDS) means to selectively transport drugs to targeted tissues, organs, and cells through a variety of drugs carrier. It is usually designed to improve the pharmacological and therapeutic properties of conventional drugs and to overcome problems such as limited solubility, drug aggregation, poor bio distribution and lack of selectivity, controlling drug release carrier and to reduce normal tissue damage. With the characteristics of nontoxic and biodegradable, it can increase the retention of drug in lesion site and the permeability, improve the concentration of the drug in lesion site. at present, there are some kinds of DDS using at test phase, such as slow controlled release drug delivery system, targeted drug delivery systems, transdermal drug delivery system, adhesion dosing system and so on. This paper makes a review for DDS.

  14. Emulsion forming drug delivery system for lipophilic drugs.

    Science.gov (United States)

    Wadhwa, Jyoti; Nair, Anroop; Kumria, Rachna

    2012-01-01

    In the recent years, there is a growing interest in the lipid-based formulations for delivery of lipophilic drugs. Due to their potential as therapeutic agents, preferably these lipid soluble drugs are incorporated into inert lipid carriers such as oils, surfactant dispersions, emulsions, liposomes etc. Among them, emulsion forming drug delivery systems appear to be a unique and industrially feasible approach to overcome the problem of low oral bioavailability associated with the BCS class II drugs. Self-emulsifying formulations are ideally isotropic mixtures of oils, surfactants and co-solvents that emulsify to form fine oil in water emulsions when introduced in aqueous media. Fine oil droplets would pass rapidly from stomach and promote wide distribution of drug throughout the GI tract, thereby overcome the slow dissolution step typically observed with solid dosage forms. Recent advances in drug carrier technologies have promulgated the development of novel drug carriers such as control release self-emulsifying pellets, microspheres, tablets, capsules etc. that have boosted the use of "self-emulsification" in drug delivery. This article reviews the different types of formulations and excipients used in emulsion forming drug delivery system to enhance the bioavailability of lipophilic drugs.

  15. RECENT ADVANCES IN NOVEL DRUG DELIVERY SYSTEMS

    Directory of Open Access Journals (Sweden)

    Manivannan Rangasamy

    2010-12-01

    Full Text Available Drug delivered can have significant effect on its efficacy. Some drugs have an optimum concentration range with in which maximum benefit is derived and concentrations above (or below the range can be toxic or produce no therapeutic effect. Various drug delivery and drug targeting systems are currently under development. The main goal for developing such delivery systems is to minimize drug degradation and loss, to prevent harmful side effects and to increase bioavailability. Targeting is the ability to direct the drug loaded system to the site of interest. Among drug carrier one can name soluble polymers, microparticles made of insoluble (or biodegradable natural and synthetic polymers, microcapsules, cells, cell ghosts, lipoproteins, liposomes and micelles. Two major mechanisms can be distinguished for addressing the desired sites for drug release, (a Passive and (b Active targeting. Controlled drug carrier systems such as micellar solutions, vescicles and liquid crystal dispersions, as well as nanoparticle dispersions consisting of small particles of 10 – 400 nm show great promise as drug delivery systems. Hydrogels are three dimensional, hydrophilic, polymer networks capable of imbibing large amounts of water or biological fluids. Buckyballs, a novel delivery system with 60 carbon atoms formed in the shape of hollow ball. They are other type’s namely bucky babies, fuzzy balls, gadofullereness, and giant fullerenes. Nanoparticles can be classified as nano tubes, nano wires, nano cantilever, nanoshells, quantum dots, nano pores. Researchers at north western university using gold particles to develop ultra sensitive detection systems for DNA and protein markers associated with many forms of cancer, including breast and prostrate cancer. Drug loaded erythrocytes is one of the growing and potential systems for delivery of drugs and enzymes.

  16. Extracellular vesicles for drug delivery

    NARCIS (Netherlands)

    Vader, Pieter; Mol, Emma A; Pasterkamp, Gerard; Schiffelers, Raymond M

    Extracellular vesicles (EVs) are cell-derived membrane vesicles, and represent an endogenous mechanism for intercellular communication. Since the discovery that EVs are capable of functionally transferring biological information, the potential use of EVs as drug delivery vehicles has gained

  17. Oral delivery of anticancer drugs

    DEFF Research Database (Denmark)

    Thanki, Kaushik; Gangwal, Rahul P; Sangamwar, Abhay T

    2013-01-01

    The present report focuses on the various aspects of oral delivery of anticancer drugs. The significance of oral delivery in cancer therapeutics has been highlighted which principally includes improvement in quality of life of patients and reduced health care costs. Subsequently, the challenges...... incurred in the oral delivery of anticancer agents have been especially emphasized. Sincere efforts have been made to compile the various physicochemical properties of anticancer drugs from either literature or predicted in silico via GastroPlus™. The later section of the paper reviews various emerging...... trends to tackle the challenges associated with oral delivery of anticancer drugs. These invariably include efflux transporter based-, functional excipient- and nanocarrier based-approaches. The role of drug nanocrystals and various others such as polymer based- and lipid based...

  18. Thermoresponsive fluconazole gels for topical delivery: rheological and mechanical properties, in vitro drug release and anti-fungal efficacy.

    Science.gov (United States)

    Gandra, Sarath C R; Nguyen, Sanko; Nazzal, Sami; Alayoubi, Alaadin; Jung, Rose; Nesamony, Jerry

    2015-01-01

    The aim of this study was to develop thermosensitive gels using poloxamers for topical delivery of fluconazole (FLZ). Eight different formulations containing 1% FLZ in poloxamer and a particular co-solvent (propylene glycol (PG) or Transcutol-P) of various concentrations were prepared. The gels were characterized for transition temperatures, rheological and mechanical properties. FLZ permeability and antifungal effect of the gels were also evaluated. Except for one formulation, all gels exhibited thermosensitive property, i.e. transformed from Newtonian (liquid-like) behavior at 20 °C to non-Newtonian (gel-like) behavior at 37 °C. Transcutol-P increased the transition temperature of the formulations, while the opposite effect was observed for PG. At 37 °C, formulations with high poloxamer concentrations (17%) resulted in high viscosity, compressibility and hardness. Formulations containing 17% poloxamer and 20% Transcutol-P and 10% PG, respectively, exhibited high adhesiveness. No significant differences in the in vitro antifungal activity of FLZ were observed among the formulations suggesting that the gel vehicles did not influence the biological effect of FLZ. FLZ permeability decreased with increasing poloxamer concentration. Formulations containing 17% poloxamer and 20% Transcutol-P and 10% PG seemed to be promising in situ gelling systems for the topical delivery of FLZ.

  19. Investigating a new drug delivery nano composite membrane system based on PVA/PCL and PVA/HA(PEG) for the controlled release of biopharmaceuticals for bone infections.

    Science.gov (United States)

    Wan, Taoyu; Stylios, George K; Giannoudi, Marilena; Giannoudis, Peter V

    2015-12-01

    The capability for sustained and gradual release of pharmaceuticals is a major requirement in the development of a guided antimicrobial bacterial control system for clinical applications. In this study, PVA gels with varying constituents that were manufactured via a refreeze/thawing route, were found to have excellent potential for antimicrobial delivery for bone infections. Cefuroxime Sodium with poly(ethylene glycol) was incorporated into 2 delivery systems poly(e-caprolactone) (PCL) and hydroxyapatite (HA), by a modified emulsion process. Our results indicate that the Cefuroxime Sodium released from poly(e-caprolactone) in PVA was tailored to a sustained release over more than 45 days, while the release from hydroxyapatite PVA reach burst maximum after 20 days. These PVA hydrogel-systems were also capable of controlled and sustained release of other biopharmaceuticals.

  20. Electrospinning nanofibers for controlled drug release

    Science.gov (United States)

    Banik, Indrani

    Electrospinning is the most widely studied technique for the synthesis of nanofibers. Electrospinning is considered as one of the technologies that can produce nanosized drugs incorporated in polymeric nanofibers. In vitro and in vivo studies have demonstrated that the release rates of drugs from these nanofiber formulations are enhanced compared to those from original drug substance. This technology has the potential for enhancing the oral delivery of poorly soluble drugs. The electrospun mats were made using Polycaprolactone/PCL, Poly(DL-lactide)/PDL 05 and Poly(DL-lactide-co-glycolide)/PLGA. The drugs incorporated in the electrospun fibers were 5-Fluorouracil and Rapamycin. The evidence of the drugs being embedded in the polymers was obtained by scanning electron microscopy (SEM), Raman and infrared spectroscopy. The release of 5-Fluorouracil and Rapamycin were followed by UV-VIS spectroscopy.

  1. Recent advances in chitosan-based nanoparticulate pulmonary drug delivery

    Science.gov (United States)

    Islam, Nazrul; Ferro, Vito

    2016-07-01

    The advent of biodegradable polymer-encapsulated drug nanoparticles has made the pulmonary route of administration an exciting area of drug delivery research. Chitosan, a natural biodegradable and biocompatible polysaccharide has received enormous attention as a carrier for drug delivery. Recently, nanoparticles of chitosan (CS) and its synthetic derivatives have been investigated for the encapsulation and delivery of many drugs with improved targeting and controlled release. Herein, recent advances in the preparation and use of micro-/nanoparticles of chitosan and its derivatives for pulmonary delivery of various therapeutic agents (drugs, genes, vaccines) are reviewed. Although chitosan has wide applications in terms of formulations and routes of drug delivery, this review is focused on pulmonary delivery of drug-encapsulated nanoparticles of chitosan and its derivatives. In addition, the controversial toxicological effects of chitosan nanoparticles for lung delivery will also be discussed.

  2. Patient's Guide to Aerosol Drug Delivery

    Science.gov (United States)

    ... Table of Contents Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ................................................................ 1. Aerosol Drug Delivery: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Aerosol Drugs: The Major Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 3. Aerosol Drug Delivery Devices: Small-Volume Nebulizers . . . . . . . . . . . . .17 4. Aerosol Drug ...

  3. Ultrasonic Drug Delivery – A General Review

    Science.gov (United States)

    Pitt, William G.; Husseini, Ghaleb A.; Staples, Bryant J.

    2006-01-01

    Ultrasound (US) has an ever-increasing role in the delivery of therapeutic agents including genetic material, proteins, and chemotherapeutic agents. Cavitating gas bodies such as microbubbles are the mediators through which the energy of relatively non-interactive pressure waves is concentrated to produce forces that permeabilize cell membranes and disrupt the vesicles that carry drugs. Thus the presence of microbubbles enormously enhances delivery of genetic material, proteins and smaller chemical agents. Delivery of genetic material is greatly enhanced by ultrasound in the presence of microbubbles. Attaching the DNA directly to the microbubbles or to gas-containing liposomes enhances gene uptake even further. US-enhanced gene delivery has been studied in various tissues including cardiac, vascular, skeletal muscle, tumor and even fetal tissue. US-enhanced delivery of proteins has found most application in transdermal delivery of insulin. Cavitation events reversibly disrupt the structure of the stratus corneum to allow transport of these large molecules. Other hormones and small proteins could also be delivered transdermally. Small chemotherapeutic molecules are delivered in research settings from micelles and liposomes exposed to ultrasound. Cavitation appears to play two roles: it disrupts the structure of the carrier vesicle and releases the drug; it also makes the cell membranes and capillaries more permeable to drugs. There remains a need to better understand the physics of cavitation of microbubbles and the impact that such cavitation has upon cells and drug-carrying vesicles. PMID:16296719

  4. NOVEL PARADIGMS IN MUCOADHESIVE DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Deepak Sharma et al

    2012-08-01

    Full Text Available Mucoadhesion is a field of current interest in the design of drug delivery systems. Mucoadhesion is commonly defined as the adhesion between two materials, at least one of which is a mucosal surface. Mucoadhesive drug delivery system may be designed to enable prolonged residence time of the dosage form at the site of application or absorption and facilitate an intimate contact of the dosage form with the underline absorption surface. Extending the residence time of a dosage form at a particular site and controlling the release of drug from the dosage form are useful especially for achieving controlled plasma level of the drug as well as improving bioavailability. Application of these dosage forms to mucosal surfaces may be of benefit to drug molecules not amenable to the oral route, such as those that undergo acid degradation or extensive first-pass metabolism. The present review describes mucoadhesion, mucoadhesive polymers and use of these polymers in designing different types of mucoadhesive gastrointestinal, nasal, ocular, vaginal and rectal drug delivery systems. The research on mucoadhesives, however, is still in its early stage, and further advances need to be made for the successful translation of the concept into practical application in controlled drug delivery.

  5. Development of Novel Delivery System for Cardiovascular Drug Molsidomine: Influence of Synthesis Method and Conditions on Molsidomine Release From Its Composites With Hydrophilic Silica In Vitro.

    Science.gov (United States)

    Dolinina, Ekaterina S; Parfenyuk, Elena V

    2016-06-01

    Composites of cardiovascular drug molsidomine with silica materials (unmodified and mercaptopropyl modified) were prepared by 2 methods, adsorption and sol-gel technology. The effects of sol pH and release medium pH (1.6 and 7.4) as well as molsidomine loading on the drug release kinetics were also investigated. Mechanisms of molsidomine release from all the synthesized composites were elucidated. The obtained results showed that different principles of the composites formation (adsorption or sol-gel) lead to their different release behavior because the composites obtained by the indicated methods differ by distribution of the drug over the silica matrixes and their capability to degradation. The drug release from the composites prepared by adsorption is characterized by a high burst effect, sustained release up to 36 h irrespective of release medium pH. The release behavior of sol-gel composites depends on the amount of the loaded drug and release medium pH. These effects were explained by different stability of the sol-gel composites with high and low loading in acidic and neutral media. In general case, the ascertained effects are independent on chemistry of the silica surface organic groups.

  6. Transdermal drug delivery system: An overview

    Directory of Open Access Journals (Sweden)

    Vaibhav Rastogi

    2012-01-01

    Full Text Available Transdermal drug delivery system (TDDS is one of the systems lying under the category of controlled drug delivery, in which the aim is to deliver the drug through the skin in a predetermined and controlled rate. It has various advantages, like prolonged therapeutic effect, reduced side-effects, improved bioavailability, better patient compliance and easy termination of drug therapy. The stratum corneum is considered as the rate limiting barrier in transdermal permeation of most molecules. There are three main routes of drug penetration, which include the appendageal, transcellular and intercellular routes. Skin age, condition, physicochemical factors and environmental factors are some factors that are to be considered while delivering drug through this route. Basic components of TDDS include polymer matrix, membrane, drug, penetration enhancers, pressure-sensitive adhesives, backing laminates, release liner, etc. Transdermal patches can be divided into various systems like reservoir system, matrix system and micro-reservoir system, which are used to incorporate the active ingredients into the circulatory system via the skin. After preparation of transdermal patches, consistent methodology are adopted to test the adhesion properties, physicochemical properties, in vitro drug release studies, in vitro skin permeation studies, skin irritation studies and stability studies. According to the duration of therapy, various drugs are commercially available in the form of transdermal patches.

  7. A REVIEW ON PARENTERAL CONTROLLED DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Milan Agrawal et al

    2012-10-01

    Full Text Available The parenteral administration route is the most effective and common form of delivery for active drug substances with poor bioavailability and the drugs with a narrow therapeutic index. Drug delivery technology that can reduce the total number of injection throughout the drug therapy period will be truly advantageous not only in terms of compliance, but also to improve the quality of the therapy and also may reduce the dosage frequency. Such reduction in frequency of drug dosing is achieved by the use of specific formulation technologies that guarantee the release of the active drug substance in a slow and predictable manner. The development of new injectable drug delivery system has received considerable attention over the past few years. A number of technological advances have been made in the area of parenteral drug delivery leading to the development of sophisticated systems that allow drug targeting and the sustained or controlled release of parenteral medicines.

  8. Transdermal Patches: A Complete Review on Transdermal Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Patel DS

    2012-03-01

    Full Text Available Today about 70% of drugs are taken orally and are found not to be as effective as desired. To improvesuch characters transdermal drug delivery system was emerged. Transdermal drug delivery system(TDDS provides a means to sustain drug release as well as reduce the intensity of action and thusreduce the side effects associated with its oral therapy and differs from traditional topical drug delivery.Transdermal Drug Delivery System is the system in which the delivery of the active ingredients of thedrug occurs by means of skin. Several important advantages of transdermal drug delivery are limitationof hepatic first pass metabolism, enhancement of therapeutic efficiency and maintenance of steadyplasma level of the drug. Various types of transdermal patches are used to incorporate the activeingredients into the circulatory system via skin. This review article covers a brief outline of theprinciples of transdermal permeation, various components of transdermal patch, approaches oftransdermal patch, evaluation of transdermal system, its application with its limitation.

  9. Drug release mechanisms of compressed lipid implants.

    Science.gov (United States)

    Kreye, F; Siepmann, F; Siepmann, J

    2011-02-14

    The aim of this study was to elucidate the mass transport mechanisms controlling drug release from compressed lipid implants. The latter steadily gain in importance as parenteral controlled release dosage forms, especially for acid-labile drugs. A variety of lipid powders were blended with theophylline and propranolol hydrochloride as sparingly and freely water-soluble model drugs. Cylindrical implants were prepared by direct compression and thoroughly characterized before and after exposure to phosphate buffer pH 7.4. Based on the experimental results, an appropriate mathematical theory was identified in order to quantitatively describe the resulting drug release patterns. Importantly, broad release spectra and release periods ranging from 1 d to several weeks could easily be achieved by varying the type of lipid, irrespective of the type of drug. Interestingly, diffusion with constant diffusivities was found to be the dominant mass transport mechanism, if the amount of water within the implant was sufficient to dissolve all of the drug. In these cases an analytical solution of Fick's second law could successfully describe the experimentally measured theophylline and propranolol hydrochloride release profiles, even if varying formulation and processing parameters, e.g. the type of lipid, initial drug loading, drug particles size as well as compression force and time. However, based on the available data it was not possible to distinguish between drug diffusion control and water diffusion control. The obtained new knowledge can nevertheless significantly help facilitating the optimization of this type of advanced drug delivery systems, in particular if long release periods are targeted, which require time consuming experimental trials.

  10. Single compartment drug delivery

    OpenAIRE

    Cima, Michael J.; Lee, Heejin; Daniel, Karen; Tanenbaum, Laura M.; Mantzavinou, Aikaterini; Spencer, Kevin C.; Ong, Qunya; Sy, Jay C.; Santini, John; Schoellhammer, Carl M.; Blankschtein, Daniel; Langer, Robert S.

    2014-01-01

    Drug design is built on the concept that key molecular targets of disease are isolated in the diseased tissue. Systemic drug administration would be sufficient for targeting in such a case. It is, however, common for enzymes or receptors that are integral to disease to be structurally similar or identical to those that play important biological roles in normal tissues of the body. Additionally, systemic administration may not lead to local drug concentrations high enough to yield disease modi...

  11. Ultrasound-Mediated Polymeric Micelle Drug Delivery.

    Science.gov (United States)

    Xia, Hesheng; Zhao, Yue; Tong, Rui

    2016-01-01

    The synthesis of multi-functional nanocarriers and the design of new stimuli-responsive means are equally important for drug delivery. Ultrasound can be used as a remote, non-invasive and controllable trigger for the stimuli-responsive release of nanocarriers. Polymeric micelles are one kind of potential drug nanocarrier. By combining ultrasound and polymeric micelles, a new modality (i.e., ultrasound-mediated polymeric micelle drug delivery) has been developed and has recently received increasing attention. A major challenge remaining in developing ultrasound-responsive polymeric micelles is the improvement of the sensitivity or responsiveness of polymeric micelles to ultrasound. This chapter reviews the recent advance in this field. In order to understand the interaction mechanism between ultrasound stimulus and polymeric micelles, ultrasound effects, such as thermal effect, cavitation effect, ultrasound sonochemistry (including ultrasonic degradation, ultrasound-initiated polymerization, ultrasonic in-situ polymerization and ultrasound site-specific degradation), as well as basic micellar knowledge are introduced. Ultrasound-mediated polymeric micelle drug delivery has been classified into two main streams based on the different interaction mechanism between ultrasound and polymeric micelles; one is based on the ultrasound-induced physical disruption of the micelle and reversible release of payload. The other is based on micellar ultrasound mechanochemical disruption and irreversible release of payload.

  12. Albumin-based drug delivery

    DEFF Research Database (Denmark)

    Larsen, Maja Thim; Kuhlmann, Matthias; Hvam, Michael Lykke

    2016-01-01

    The effectiveness of a drug is dependent on accumulation at the site of action at therapeutic levels, however, challenges such as rapid renal clearance, degradation or non-specific accumulation requires drug delivery enabling technologies. Albumin is a natural transport protein with multiple ligand...... binding sites, cellular receptor engagement, and a long circulatory half-life due to interaction with the recycling neonatal Fc receptor. Exploitation of these properties promotes albumin as an attractive candidate for half-life extension and targeted intracellular delivery of drugs attached by covalent...... conjugation, genetic fusions, association or ligand-mediated association. This review will give an overview of albumin-based products with focus on the natural biological properties and molecular interactions that can be harnessed for the design of a next-generation drug delivery platform....

  13. Recent Advances in Ocular Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Shinobu Fujii

    2011-01-01

    Full Text Available Transport of drugs applied by traditional dosage forms is restricted to the eye, and therapeutic drug concentrations in the target tissues are not maintained for a long duration since the eyes are protected by a unique anatomy and physiology. For the treatment of the anterior segment of the eye, various droppable products to prolong the retention time on the ocular surface have been introduced in the market. On the other hand, direct intravitreal implants, using biodegradable or non-biodegradable polymer technology, have been widely investigated for the treatment of chronic vitreoretinal diseases. There is urgent need to develop ocular drug delivery systems which provide controlled release for the treatment of chronic diseases, and increase patient’s and doctor’s convenience to reduce the dosing frequency and invasive treatment. In this article, progress of ocular drug delivery systems under clinical trials and in late experimental stage is reviewed.

  14. Hybrid nanostructured drug carrier with tunable and controlled drug release

    Energy Technology Data Exchange (ETDEWEB)

    Depan, D.; Misra, R.D.K., E-mail: dmisra@louisiana.edu

    2012-08-01

    We describe here a transformative approach to synthesize a hybrid nanostructured drug carrier that exhibits the characteristics of controlled drug release. The synthesis of the nanohybrid architecture involved two steps. The first step involved direct crystallization of biocompatible copolymer along the long axis of the carbon nanotubes (CNTs), followed by the second step of attachment of drug molecule to the polymer via hydrogen bonding. The extraordinary inorganic-organic hybrid architecture exhibited high drug loading ability and is physically stable even under extreme conditions of acidic media and ultrasonic irradiation. The temperature and pH sensitive characteristics of the hybrid drug carrier and high drug loading ability merit its consideration as a promising carrier and utilization of the fundamental aspects used for synthesis of other promising drug carriers. The higher drug release response during the application of ultrasonic frequency is ascribed to a cavitation-type process in which the acoustic bubbles nucleate and collapse releasing the drug. Furthermore, the study underscores the potential of uniquely combining CNTs and biopolymers for drug delivery. - Graphical abstract: Block-copolymer crystallized on carbon nanotubes (CNTs). Nanohybrid drug carrier synthesized by attaching doxorubicin (DOX) to polymer crystallized CNTs. Crystallized polymer on CNTs provide mechanical stability. Triggered release of DOX. Highlights: Black-Right-Pointing-Pointer The novel synthesis of a hybrid nanostructured drug carrier is described. Black-Right-Pointing-Pointer The drug carrier exhibits high drug loading ability and is physically stable. Black-Right-Pointing-Pointer The high drug release is ascribed to a cavitation-type process.

  15. The use of solid lipid nanoparticles for sustained drug release.

    Science.gov (United States)

    Attama, Anthony A; Umeyor, Chukwuebuka E

    2015-01-01

    Novel solid lipid drug delivery systems such as solid lipid nanoparticles (SLN) have attracted wide and increasing attention in recent years. It has been sought as an interesting alternative drug delivery carrier system for bioactives for a variety of delivery routes. They show major advantages such as sustained release, improved bioavailability, improved drug incorporation and very wide application. This paper presents a discussion on the production protocols of SLN, lyophilization of SLN and delivery of SLN across the blood-brain barrier. Special attention was also paid to entrapment and release of drugs from SLN and strategies to enhance drug entrapment in SLN for sustained release. Analytical methods for the characterization of SLN were also discussed. Various routes of administration of SLN were presented as well as a consideration of the ethical issues and future prospects in the production and use of SLN for sustained release of bioactives.

  16. Ultrasonic drug delivery--a general review.

    Science.gov (United States)

    Pitt, William G; Husseini, Ghaleb A; Staples, Bryant J

    2004-11-01

    Ultrasound has an ever-increasing role in the delivery of therapeutic agents, including genetic material, protein and chemotherapeutic agents. Cavitating gas bodies, such as microbubbles, are the mediators through which the energy of relatively non-interactive pressure waves is concentrated to produce forces that permeabilise cell membranes and disrupt the vesicles that carry drugs. Thus, the presence of microbubbles enormously enhances ultrasonic delivery of genetic material, proteins and smaller chemical agents. Numerous reports show that the most efficient delivery of genetic material occurs in the presence of cavitating microbubbles. Attaching the DNA directly to the microbubbles, or to gas-containing liposomes, enhances gene uptake even further. Ultrasonic-enhanced gene delivery has been studied in various tissues, including cardiac, vascular, skeletal muscle, tumour and even fetal tissue. Ultrasonic-assisted delivery of proteins has found most application in transdermal transport of insulin. Cavitation events reversibly disrupt the structure of the stratus corneum to allow transport of these large molecules. Other hormones and small proteins could also be delivered transdermally. Small chemotherapeutic molecules are delivered in research settings from micelles and liposomes exposed to ultrasound. Cavitation appears to play two roles: it disrupts the structure of the carrier vesicle and releases the drug; and makes cell membranes and capillaries more permeable to drugs. There remains a need to better understand the physics of cavitation of microbubbles and the impact that such cavitation has on cells and drug-carrying vesicles.

  17. Engineering bioceramic microstructure for customized drug delivery

    Science.gov (United States)

    Pacheco Gomez, Hernando Jose

    One of the most efficient approaches to treat cancer and infection is to use biomaterials as a drug delivery system (DDS). The goal is for the material to provide a sustained release of therapeutic drug dose locally to target the ill tissue without affecting other organs. Silica Calcium Phosphate nano composite (SCPC) is a drug delivery platform that successfully demonstrated the ability to bind and release several therapeutics including antibiotics, anticancer drugs, and growth factors. The aim of the present work is to analyze the role of SCPC microstructure on drug binding and release kinetics. The main crystalline phases of SCPC are alpha-cristobalite (SiO2, Cris) and beta-rhenanite (NaCaPO4, Rhe); therefore, these two phases were prepared and characterized separately. Structural and compositional features of Cris, Rhe and SCPC bioceramics demonstrated a significant influence on the loading capacity and release kinetics profile of Vancomycin (Vanc) and Cisplatin (Cis). Fourier Transform Infrared (FTIR) spectroscopy analyses demonstrated that the P-O functional group in Rhe and SCPC has high affinity to the (C=O and N-H) of Vanc and (N-H and O-H) of Cis. By contrast, a weak chemical interaction between the Si-O functional group in Cris and SCPC and the two drugs was observed. Vanc loading per unit surface area increased in the order 8.00 microg Vanc/m2 for Rhe > 4.49 microg Vanc /m2 for SCPC>3.01 microg Vanc /m2 for Cris (pAnimals were treated by either systemic cisplatin injection (sCis), or with SCPC-Cis hybrid placed adjacent (ADJ) to, or within (IT), the tumor. Five days after implantation 50-55% of the total cisplatin loaded was released from the SCPC-Cis hybrids resulting in an approximately 50% decrease in tumor volume compared to sCis treatment. Severe side effects were observed in animals treated with sCis including rapid weight loss and decreased liver and kidney function, effects not observed in SCPC-Cis treated animals. Analysis of cisplatin

  18. Structural DNA nanotechnology for intelligent drug delivery.

    Science.gov (United States)

    Chao, Jie; Liu, Huajie; Su, Shao; Wang, Lianhui; Huang, Wei; Fan, Chunhai

    2014-11-01

    Drug delivery carriers have been popularly employed to improve solubility, stability, and efficacy of chemical and biomolecular drugs. Despite the rapid progress in this field, it remains a great challenge to develop an ideal carrier with minimal cytotoxicity, high biocompatibility and intelligence for targeted controlled release. The emergence of DNA nanotechnology offers unprecedented opportunities in this regard. Due to the unparalleled self-recognition properties of DNA molecules, it is possible to create numerous artificial DNA nanostructures with well-defined structures and DNA nanodevices with precisely controlled motions. More importantly, recent studies have proven that DNA nanostructures possess greater permeability to the membrane barrier of cells, which pave the way to developing new drug delivery carriers with nucleic acids, are summarized. In this Concept, recent advances on the design and fabrication of both static and dynamic DNA nanostructures, and the use of these nanostructures for the delivery of various types of drugs, are highlighted. It is also demonstrated that dynamic DNA nanostructures provide the required intelligence to realize logically controlled drug release.

  19. Controlled drug delivery systems towards new frontiers in patient care

    CERN Document Server

    Rossi, Filippo; Masi, Maurizio

    2016-01-01

    This book offers a state-of-the-art overview of controlled drug delivery systems, covering the most important innovative applications. The principles of controlled drug release and the mechanisms involved in controlled release are clearly explained. The various existing polymeric drug delivery systems are reviewed, and new frontiers in material design are examined in detail, covering a wide range of polymer modification techniques. The concluding chapter is a case study focusing on use of a drug-eluting stent. The book is designed to provide the reader with a complete understanding of the mechanisms and design of controlled drug delivery systems, and to this end includes numerous step-by-step tutorials. It illustrates how chemical engineers can advance medical care by designing polymeric delivery systems that achieve either temporal or spatial control of drug delivery and thus ensure more effective therapy that eliminates the potential for both under-and overdosing.

  20. PEGylated Silk Nanoparticles for Anticancer Drug Delivery

    DEFF Research Database (Denmark)

    Wongpinyochit, Thidarat; Uhlmann, Petra; Urquhart, Andrew

    2015-01-01

    .6 mV) using nanoprecipitation. We then surface grafted polyethylene glycol (PEG) to the fabricated silk nanoparticles and verified the aqueous stability and morphology of the resulting PEGylated silk nanoparticles. We assessed the drug loading and release behavior of these nanoparticles using...... clinically established and emerging anticancer drugs. Overall, PEGylated silk nanoparticles showed high encapsulation efficiency (>93%) and a pH-dependent release over 14 days. Finally, we demonstrated significant cytotoxicity of drug loaded silk nanoparticles applied as single and combination nanomedicines......Silk has a robust clinical track record and is emerging as a promising biopolymer for drug delivery, including its use as nanomedicine. However, silk-based nanomedicines still require further refinements for full exploitation of their potential; the application of “stealth” design principals...

  1. Solid lipid excipients - matrix agents for sustained drug delivery.

    Science.gov (United States)

    Rosiaux, Yvonne; Jannin, Vincent; Hughes, Sophie; Marchaud, Delphine

    2014-08-28

    Lipid excipients are attracting interest from drug developers due to their performance, ease of use, versatility and their potential to generate intellectual property through innovation in drug delivery particularly in the case of modifying drug release systems. Many articles have described the use of lipid excipients to develop matrix modified release dosage forms in a range of processing techniques, therefore a comprehensive review is timely to collect together and analyze key information. This review article focuses on the utility of lipid excipients in solid sustained drug delivery systems with emphasis on the efficiency and robustness of these systems with respect to: (i) the choice of the manufacturing process and impact on drug release, (ii) the fundamental drug release mechanisms, (iii) resistance of the drug formulation under physiological conditions and (iv) long-term stability. Understanding the functionality of these versatile excipients in formulation is elementary for the development of highly robust lipid-based sustained release medicines.

  2. Drug delivery system and breast cancer cells

    Science.gov (United States)

    Colone, Marisa; Kaliappan, Subramanian; Calcabrini, Annarica; Tortora, Mariarosaria; Cavalieri, Francesca; Stringaro, Annarita

    2016-06-01

    Recently, nanomedicine has received increasing attention for its ability to improve the efficacy of cancer therapeutics. Nanosized polymer therapeutic agents offer the advantage of prolonged circulation in the blood stream, targeting to specific sites, improved efficacy and reduced side effects. In this way, local, controlled delivery of the drug will be achieved with the advantage of a high concentration of drug release at the target site while keeping the systemic concentration of the drug low, thus reducing side effects due to bioaccumulation. Various drug delivery systems such as nanoparticles, liposomes, microparticles and implants have been demonstrated to significantly enhance the preventive/therapeutic efficacy of many drugs by increasing their bioavailability and targetability. As these carriers significantly increase the therapeutic effect of drugs, their administration would become less cost effective in the near future. The purpose of our research work is to develop a delivery system for breast cancer cells using a microvector of drugs. These results highlight the potential uses of these responsive platforms suited for biomedical and pharmaceutical applications. At the request of all authors of the paper an updated version was published on 12 July 2016. The manuscript was prepared and submitted without Dr. Francesca Cavalieri's contribution and her name was added without her consent. Her name has been removed in the updated and re-published article.

  3. Ultrasound triggered, image guided, local drug delivery.

    Science.gov (United States)

    Deckers, Roel; Moonen, Chrit T W

    2010-11-20

    Ultrasound allows the deposition of thermal and mechanical energies deep inside the human body in a non-invasive way. Ultrasound can be focused within a region with a diameter of about 1mm. The bio-effects of ultrasound can lead to local tissue heating, cavitation, and radiation force, which can be used for 1) local drug release from nanocarriers circulating in the blood, 2) increased extravasation of drugs and/or carriers, and 3) enhanced diffusivity of drugs. When using nanocarriers sensitive to mechanical forces (the oscillating ultrasound pressure waves) and/or sensitive to temperature, the content of the nanocarriers can be released locally. Thermo-sensitive liposomes have been suggested for local drug release in combination with local hyperthermia more than 25 years ago. Microbubbles may be designed specifically to enhance cavitation effects. Real-time imaging methods, such as magnetic resonance, optical and ultrasound imaging have led to novel insights and methods for ultrasound triggered drug delivery. Image guidance of ultrasound can be used for: 1) target identification and characterization; 2) spatio-temporal guidance of actions to release or activate the drugs and/or permeabilize membranes; 3) evaluation of bio-distribution, pharmacokinetics and pharmacodynamics; and 4) physiological read-outs to evaluate the therapeutic efficacy.

  4. A COMPREHENSIVE REVIEW OF PULSATILE DRUG DELIVERY SYSTEMS

    Directory of Open Access Journals (Sweden)

    Rompicharla Bhargavi

    2012-03-01

    Full Text Available Pulsatile drug delivery systems are gaining popularity in the field of pharmaceutical formulation, research and development. The prime advantage in this drug delivery is that the drug is released as per the pathophysiological need of the disease. As a result the change of development of drug resistance which is seen in conventional and sustained released formulations can be reduced. This therapy is mainly applicable where sustained action is not required and the drugs are toxic. Basic point of development of this formulation is to find out the circadian rhythms that is a suitable indicator that will trigger the release of drug from the device. Clock genes are the genes that control the circadian rhythms in human physiology. Pulsatile drug delivery systems are promising incase of asthma, cardiovascular diseases, peptic ulcers, arthritis, and hypercholesterolemic conditions.

  5. Biopolymers as transdermal drug delivery systems in dermatology therapy.

    Science.gov (United States)

    Basavaraj, K H; Johnsy, George; Navya, M A; Rashmi, R; Siddaramaiah

    2010-01-01

    The skin is considered a complex organ for drug delivery because of its structure. Drug delivery systems are designed for the controlled release of drugs through the skin into the systemic circulation, maintaining consistent efficacy and reducing the dose of the drugs and their related side effects. Transdermal drug delivery represents one of the most rapidly advancing areas of novel drug delivery. The excellent impervious nature of the skin is the greatest challenge that must be overcome for successful drug delivery. Today, polymers have been proven to be successful for long-term drug delivery applications as no single polymer can satisfy all of the requirements. Biopolymers in the field of dermal application are rare and the mechanisms that affect skin absorption are almost unknown. Biopolymers are widely used as drug delivery systems, but as such the use of biopolymers as drug delivery systems in dermatologic therapy is still in progress. Commonly used biopolymers include hydrocolloids, alginates, hydrogels, polyurethane, collagen, poly(lactic-co-glycolic acid), chitosan, proteins and peptides, pectin, siRNAs, and hyaluronic acid. These new and exciting methods for drug delivery are already increasing the number and quality of dermal and transdermal therapies. This article reviews current research on biopolymers and focuses on their potential as drug carriers, particularly in relation to the dermatologic aspects of their use.

  6. Multifunctional inverse opal particles for drug delivery and monitoring.

    Science.gov (United States)

    Zhang, Bin; Cheng, Yao; Wang, Huan; Ye, Baofen; Shang, Luoran; Zhao, Yuanjin; Gu, Zhongze

    2015-06-28

    Particle-based delivery systems have a demonstrated value for drug discovery and development. Here, we report a new type of particle-based delivery system that has controllable release and is self-monitoring. The particles were composed of poly(N-isopropylacrylamide) (pNIPAM) hydrogel with an inverse opal structure. The presence of macropores in the particles provides channels for active drug loading and release from the materials.

  7. TRANSDERMAL DRUG DELIVERY SYSTEM: REVIEW

    Directory of Open Access Journals (Sweden)

    Virendra Yadav

    2012-01-01

    Full Text Available Transdermal drug delivery system (TDDS are topically administered medicaments in the form of patches that deliver drugs for systemic effects at a predetermined and controlled rate. It works very simply in which drug is applied inside the patch and it is worn on skin for long period of time. By this constant concentration of drug remain in blood for long time. Polymer matrix, drug, permeation enhancers are the main components of TDDS; polymers includes Zein, Shellac (as a natural to synthetic ones (Polybutadiene, Polysiloxane, Polyvinyl chloride, Polyvinyl alcohol etc.. TDDS are of many types varying from single layer drug in adhesive to multi layer drug in adhesive and others are reservoir and the matrix systems. The market value of TDDS products are increasing with rapid rate, more than 35 products have now been approved for sale in US, and approximately 16 active ingredients are approved globally for use as a TDDS. Transdermal drug delivery is a recent technology which promises a great future it has a potential to limit the use of needles for administering wide variety of drugs but cost factor is a important thing to consider since developing nations like INDIA have second highest population, but due to higher cost TDDS are the hidden part of therapy used in general population.

  8. NASAL IN SITU GEL: A NOVEL DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Dhrupesh panchal

    2012-06-01

    Full Text Available Over the past few decades, advances in the in situ gel technologies have spurred development in manymedical and biomedical applications including controlled drug delivery. Many novel in situ gel baseddelivery matrices have been designed and fabricated to fulfill the ever increasing needs of thepharmaceutical and medical fields. In situ gelling systems are liquid at room temperature but undergogelation when in contact with body fluids or change in pH. In situ gel forming drug delivery is a type ofmucoadhesive drug delivery system. The formation of gel depends on factors like temperaturemodulation, pH change, presence of ions and ultraviolet irradiation from which the drug gets released ina sustained and controlled manner. Nasal delivery is a promising drug delivery option where commondrug administrations such as intravenous, intramuscular or oral are inapplicable. Recently, it has beenshown that many drugs have better bioavailability by nasal route than the oral route. This has beenattributed to rich vasculature and a highly permeable structure of the nasal mucosa coupled withavoidance of hepatic first-pass elimination, gut wall metabolism and/or destruction in thegastrointestinal tract. The physiology of the nose presents obstacles but offers a promising route for noninvasivesystemic delivery of numerous therapies and debatably drug delivery route to the brain. Thusthis review focuses on nasal drug delivery, various aspects of nasal anatomy and physiology, nasal drugabsorption mechanisms, various nasal drug delivery systems and their applications in drug delivery.

  9. Polymer micelles for delayed release of therapeutics from drug-releasing surfaces with nanotubular structures.

    Science.gov (United States)

    Sinn Aw, Moom; Addai-Mensah, Jonas; Losic, Dusan

    2012-08-01

    A new approach to engineer a local drug delivery system with delayed release using nanostructured surface with nanotube arrays is presented. TNT arrays electrochemically generated on a titanium surface are used as a model substrate. Polymer micelles as drug carriers encapsulated with drug are loaded at the bottom of the TNT structure and their delayed release is obtained by loading blank micelles (without drug) on the top. The delayed and time-controlled drug release is successfully demonstrated by controlling the ratio of blank and drug loaded-micelles. The concept is verified using four different polymer micelles (regular and inverted) loaded with water-insoluble (indomethacin) and water-soluble drugs (gentamicin).

  10. CURRENT TRENDS IN PULSATILE DRUG DELIVERY SYSTEMS

    Directory of Open Access Journals (Sweden)

    S. R. Tajane et al.

    2012-01-01

    Full Text Available The purpose for this review on pulsatile drug delivery systems (PDDS is to compile the recent literatures with special focus on the different types and approaches involved in the development of the formulation. Pulsatile drug delivery system is the most interesting time and site-specific system. This system is designed for chronopharmacotherapy. Thus, to mimic the function of living systems and in view of emerging chronotherapeutic approaches, pulsatile delivery, which is meant to release a drug following programmed lag phase, has increasing interest in the recent years. Diseases wherein PDDS are promising include asthma, peptic ulcer, cardiovascular diseases, arthritis, and attention deficit syndrome in children, cancer, diabetes, and hypercholesterolemia. Pulsatile drug delivery system divided into 2 types’ preplanned systems and stimulus induced system, preplanned systems based on osmosis, rupturable layers, and erodible barrier coatings. Stimuli induced system based on electrical, temperature and chemically induced systems. This review also summarizes some current PDDS already available in the market. These systems are useful to several problems encountered during the development of a pharmaceutical dosage form.

  11. Extracellular vesicles for drug delivery

    NARCIS (Netherlands)

    Vader, Pieter; Mol, Emma A; Pasterkamp, Gerard; Schiffelers, Raymond M

    2016-01-01

    Extracellular vesicles (EVs) are cell-derived membrane vesicles, and represent an endogenous mechanism for intercellular communication. Since the discovery that EVs are capable of functionally transferring biological information, the potential use of EVs as drug delivery vehicles has gained consider

  12. [Drug delivery systems for intraocular applications].

    Science.gov (United States)

    Bourges, J-L; Touchard, E; Kowalczuk, L; Berdugo, M; Thomas-Doyle, A; Bochot, A; Gomez, A; Azan, F; Gurny, R; Behar-Cohen, F

    2007-12-01

    Numerous drug delivery systems (DDSs) can be used as intraocular tools to provide a sustained and calibrated release for a specific drug. Great progress has been made on the design, biocompatibility, bioavailability, and efficacy of DDSs. Although several of them are undergoing clinical trials, a few are already on the market and could be of a routine use in clinical practice. Moreover, miniaturization of the implants makes them less and less traumatic for the eye tissues and some DDSs are now able to target certain cells or tissues specifically. An overview of ocular implants with therapeutic application potentials is provided.

  13. The effect of carbon nanotubes on drug delivery in an electro-sensitive transdermal drug delivery system.

    Science.gov (United States)

    Im, Ji S; Bai, Byong Ch; Lee, Young-Seak

    2010-02-01

    An electro-sensitive transdermal drug delivery system was prepared by the electrospinning method to control drug release. A semi-interpenetrating polymer network was prepared as the matrix with polyethylene oxide and pentaerythritol triacrylate polymers. Multi-walled carbon nanotubes were used as an additive to increase the electrical sensitivity. The release experiment was carried out under different electric voltage conditions. Carbon nanotubes were observed in the middle of the electrospun fibers by SEM and TEM. The amount of released drug was effectively increased with higher applied electric voltages. These results were attributed to the excellent electrical conductivity of the carbon additive. The suggested mechanism of drug release involves polyethylene oxide of the semi-interpenetrating polymer network being dissolved under the effects of carbon nanotubes, thereby releasing the drug. The effects of the electro-sensitive transdermal drug delivery system were enhanced by the carbon nanotubes.

  14. Drug delivery by lipid cochleates.

    Science.gov (United States)

    Zarif, Leila

    2005-01-01

    Drug delivery technology has brought additional benefits to pharmaceuticals such as reduction in dosing frequency and side effects, as well as the extension of patient life. To address this need, cochleates, a precipitate obtained as a result of the interaction between phosphatidylserine and calcium, have been developed and proved to have potential in encapsulating and delivering small molecule drugs. This chapter discusses the molecules that can be encapsulated in a cochleate system and describes in detail the methodology that can be used to encapsulate and characterize hydrophobic drugs such as amphotericin B, a potent antifungal agent. Some efficacy data in animal models infected with candidiasis or aspergillosis are described as well.

  15. PEGylated Silk Nanoparticles for Anticancer Drug Delivery.

    Science.gov (United States)

    Wongpinyochit, Thidarat; Uhlmann, Petra; Urquhart, Andrew J; Seib, F Philipp

    2015-11-09

    Silk has a robust clinical track record and is emerging as a promising biopolymer for drug delivery, including its use as nanomedicine. However, silk-based nanomedicines still require further refinements for full exploitation of their potential; the application of "stealth" design principals is especially necessary to support their evolution. The aim of this study was to develop and examine the potential of PEGylated silk nanoparticles as an anticancer drug delivery system. We first generated B. mori derived silk nanoparticles by driving β-sheet assembly (size 104 ± 1.7 nm, zeta potential -56 ± 5.6 mV) using nanoprecipitation. We then surface grafted polyethylene glycol (PEG) to the fabricated silk nanoparticles and verified the aqueous stability and morphology of the resulting PEGylated silk nanoparticles. We assessed the drug loading and release behavior of these nanoparticles using clinically established and emerging anticancer drugs. Overall, PEGylated silk nanoparticles showed high encapsulation efficiency (>93%) and a pH-dependent release over 14 days. Finally, we demonstrated significant cytotoxicity of drug loaded silk nanoparticles applied as single and combination nanomedicines to human breast cancer cells. In conclusion, these results, taken together with prior silk nanoparticle data, support a viable future for silk-based nanomedicines.

  16. A Controlled Drug-Delivery Experiment Using Alginate Beads

    Science.gov (United States)

    Farrell, Stephanie; Vernengo, Jennifer

    2012-01-01

    This paper describes a simple, cost-effective experiment which introduces students to drug delivery and modeling using alginate beads. Students produce calcium alginate beads loaded with drug and measure the rate of release from the beads for systems having different stir rates, geometries, extents of cross-linking, and drug molecular weight.…

  17. A Controlled Drug-Delivery Experiment Using Alginate Beads

    Science.gov (United States)

    Farrell, Stephanie; Vernengo, Jennifer

    2012-01-01

    This paper describes a simple, cost-effective experiment which introduces students to drug delivery and modeling using alginate beads. Students produce calcium alginate beads loaded with drug and measure the rate of release from the beads for systems having different stir rates, geometries, extents of cross-linking, and drug molecular weight.…

  18. Continuous drug release by sea anemone Nematostella vectensis stinging microcapsules.

    Science.gov (United States)

    Tal, Yossi; Ayalon, Ari; Sharaev, Agnesa; Kazir, Zoya; Brekhman, Vera; Lotan, Tamar

    2014-01-27

    Transdermal delivery is an attractive option for drug delivery. Nevertheless, the skin is a tough barrier and only a limited number of drugs can be delivered through it. The most difficult to deliver are hydrophilic drugs. The stinging mechanism of the cnidarians is a sophisticated injection system consisting of microcapsular nematocysts, which utilize built-in high osmotic pressures to inject a submicron tubule that penetrates and delivers their contents to the prey. Here we show, for the first time, that the nematocysts of the starlet sea anemone Nematostella vectensis can be isolated and incorporated into a topical formulation for continuous drug delivery. We demonstrate quantitative delivery of nicotinamide and lidocaine hydrochloride as a function of microcapsular dose or drug exposure. We also show how the released submicron tubules can be exploited as a skin penetration enhancer prior to and independently of drug application. The microcapsules are non-irritant and may offer an attractive alternative for hydrophilic transdermal drug delivery.

  19. Continuous Drug Release by Sea Anemone Nematostella vectensis Stinging Microcapsules

    Science.gov (United States)

    Tal, Yossi; Ayalon, Ari; Sharaev, Agnesa; Kazir, Zoya; Brekhman, Vera; Lotan, Tamar

    2014-01-01

    Transdermal delivery is an attractive option for drug delivery. Nevertheless, the skin is a tough barrier and only a limited number of drugs can be delivered through it. The most difficult to deliver are hydrophilic drugs. The stinging mechanism of the cnidarians is a sophisticated injection system consisting of microcapsular nematocysts, which utilize built-in high osmotic pressures to inject a submicron tubule that penetrates and delivers their contents to the prey. Here we show, for the first time, that the nematocysts of the starlet sea anemone Nematostella vectensis can be isolated and incorporated into a topical formulation for continuous drug delivery. We demonstrate quantitative delivery of nicotinamide and lidocaine hydrochloride as a function of microcapsular dose or drug exposure. We also show how the released submicron tubules can be exploited as a skin penetration enhancer prior to and independently of drug application. The microcapsules are non-irritant and may offer an attractive alternative for hydrophilic transdermal drug delivery. PMID:24473172

  20. Emerging Technologies of Polymeric Nanoparticles in Cancer Drug Delivery

    Directory of Open Access Journals (Sweden)

    Erik Brewer

    2011-01-01

    Full Text Available Polymeric nanomaterials have the potential to improve upon present chemotherapy delivery methods. They successfully reduce side effects while increasing dosage, increase residence time in the body, offer a sustained and tunable release, and have the ability to deliver multiple drugs in one carrier. However, traditional nanomaterial formulations have not produced highly therapeutic formulations to date due to their passive delivery methods and lack of rapid drug release at their intended site. In this paper, we have focused on a few “smart” technologies that further enhance the benefits of typical nanomaterials. Temperature and pH-responsive drug delivery devices were reviewed as methods for triggering release of encapsulating drugs, while aptamer and ligand conjugation were discussed as methods for targeted and intracellular delivery, with emphases on in vitro and in vivo works for each method.

  1. Cubosomes and hexosomes as versatile platforms for drug delivery

    DEFF Research Database (Denmark)

    Mat Azmi, Intan Diana Binti; Moghimi, Seyed M; Yaghmur, Anan

    2015-01-01

    Nonlamellar liquid crystalline phases are attractive platforms for drug solubilization and targeted delivery. The attractiveness of this formulation principle is linked to the nanostructural versatility, compatiblity, digestiblity and bioadhesive properties of their lipid constituents......, and the capability of solubilizing and sustaining the release of amphiphilic, hydrophobic and hydrophilic drugs. Nonlamellar liquid crystalline phases offer two distinct promising strategies in the development of drug delivery systems. These comprise formation of ISAsomes (internally self-assembled 'somes...

  2. Trojan Microparticles for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Thierry F. Vandamme

    2012-01-01

    Full Text Available During the last decade, the US Food and Drug Administration (FDA have regulated a wide range of products, (foods, cosmetics, drugs, devices, veterinary, and tobacco which may utilize micro and nanotechnology or contain nanomaterials. Nanotechnology allows scientists to create, explore, and manipulate materials in nano-regime. Such materials have chemical, physical, and biological properties that are quite different from their bulk counterparts. For pharmaceutical applications and in order to improve their administration (oral, pulmonary and dermal, the nanocarriers can be spread into microparticles. These supramolecular associations can also modulate the kinetic releases of drugs entrapped in the nanoparticles. Different strategies to produce these hybrid particles and to optimize the release kinetics of encapsulated drugs are discussed in this review.

  3. Elastin-like recombinamers as smart drug delivery systems.

    Science.gov (United States)

    Javier Arias, F; Santos, Mercedes; Ibáñez-Fonseca, Arturo; Piña, Maria Jesús; Serrano, Sofía

    2016-01-31

    Drug delivery systems that are able to control site and rate release of bioactive molecules are of particular interest for tissue therapy. Systems comprising biocompatible materials that can respond to environmental stimuli include elastin-like recombinamers (ELRs), a class of proteinaceous polymers bioinspired by natural elastin, which are especially useful as advanced drug delivery systems in the biomedical field. This review brings together information concerning different versions of ELR-based delivery systems that allow targeted delivery. ELR-drug systems in their monomeric form as well as drug encapsulation by nanoparticle-forming ELRs will be reviewed, focusing later on these drug carriers in which smart release is triggered by pH or temperature with a particular interest on cancer treatments. Systems for controlled drug release based on depots and hydrogels that act both as a support and reservoir in which drugs can be stored will be described, and their applications in drug delivery discussed. Finally, smart drug-delivery systems not based on ELRs, including those comprising proteins, synthetic polymers and non-polymeric systems, will also be briefly discussed.

  4. Loading of microcontainers for oral drug delivery

    DEFF Research Database (Denmark)

    Marizza, Paolo

    , they are usually degraded before they are absorbed. These combined factors considerably reduce the bioavailability of many active ingredients. Several strategies have been developed to overcome these challenges. One of them are microfabricated drug delivery devices. Microreservoir based-systems are characterized...... of drugs and with the perspective of mass production. In a first instance, the suitability of inkjet printing as filling method was elucidated. Solutions containing furosemide and lipid based formulations of insulin were dispensed into microcontainers. Secondly, this technique was successfully utilized...... to dispense controlled amounts of polymer into microcontainers. Subsequently, polymer filled-containers were loaded with drug. To achieve this, supercritical impregnation technology was successfully employed. Furthermore, in vitro drug dissolution studies showed that the loading yields and the release...

  5. Protease-mediated drug delivery

    Science.gov (United States)

    Dickson, Eva F.; Goyan, Rebecca L.; Kennedy, James C.; Mackay, M.; Mendes, M. A. K.; Pottier, Roy H.

    2003-12-01

    Drugs used in disease treatment can cause damage to both malignant and normal tissue. This toxicity limits the maximum therapeutic dose. Drug targeting is of high interest to increase the therapeutic efficacy of the drug without increasing systemic toxicity. Certain tissue abnormalities, disease processes, cancers, and infections are characterized by high levels of activity of specific extracellular and/or intracellular proteases. Abnormally high activity levels of specific proteases are present at sites of physical or chemical trauma, blood clots, malignant tumors, rheumatoid arthritis, inflammatory bowel disease, gingival disease, glomerulonerphritis, and acute pancreatitis. Abnormal protease activity is suspected in development of liver thrombosis, pulmonary emphysema, atherosclerosis, and muscular dystrophy. Inactiviating disease-associated proteases by the administration of appropriate protease inhibitors has had limited success. Instead, one could use such proteases to target drugs to treat the condition. Protease mediated drug delivery offers such a possibility. Solubilizing groups are attached to insoluble drugs via a polypeptide chain which is specifically cleavable by certian proteases. When the solubilized drug enounters the protease, the solubilizing moieties are cleaved, and the drug precipitates at the disease location. Thus, a smaller systemic dosage could result in a therapeutic drug concentration at the treatment site with less systemic toxicity.

  6. Nanobiotechnology and its applications in drug delivery system: a review.

    Science.gov (United States)

    Khan, Imran; Khan, Momin; Umar, Muhammad Naveed; Oh, Deog-Hwan

    2015-12-01

    Nanobiotechnology holds great potential in various regimes of life sciences. In this review, the potential applications of nanobiotechnology in various sectors of nanotechnologies, including nanomedicine and nanobiopharmaceuticals, are highlighted. To overcome the problems associated with drug delivery, nanotechnology has gained increasing interest in recent years. Nanosystems with different biological properties and compositions have been extensively investigated for drug delivery applications. Nanoparticles fabricated through various techniques have elevated therapeutic efficacy, provided stability to the drugs and proved capable of targeting the cells and controlled release inside the cell. Polymeric nanoparticles have shown increased development and usage in drug delivery as well as in diagnostics in recent decades.

  7. An Overview on Osmotic Controlled Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Thummar A

    2013-06-01

    Full Text Available This paper reviews constructed drug delivery systems applying osmotic principles for controlled drugrelease from the formulation. Osmotic devices which are tablets coated with walls of controlled porosityare the most promising strategy based systems for controlled drug delivery. In contrast to commontablets, these pumps provide constant (zero order drug release rate. When these systems are exposed towater, low levels of water soluble additive is leached from polymeric material i.e. semipermeablemembrane and drug releases in a controlled manner over an extended period of time. The main clinicalbenefits of oral osmotic drug delivery system are their ability to improve treatment tolerability andpatient compliance. These advantages are mainly driven by the capacity to deliver drugs in a sustainedmanner, independent of the drug chemical properties, of the patient’s physiological factors or followingfood intake. This review brings out the theoretical concept of drug delivery, history, advantages anddisadvantages of the delivery systems, types of oral osmotic drug delivery systems, factors affecting thedrug delivery system and marketed products.

  8. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.

    2016-03-31

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  9. Comparison of sequential drug release in vitro and in vivo.

    Science.gov (United States)

    Sundararaj, Sharath C; Al-Sabbagh, Mohanad; Rabek, Cheryl L; Dziubla, Thomas D; Thomas, Mark V; Puleo, David A

    2016-10-01

    Development of drug-delivery devices typically involves characterizing in vitro release performance with the inherent assumption that this will closely approximate in vivo performance. Yet, as delivery devices become more complex, for instance with a sequential drug release pattern, it is important to confirm that in vivo properties correlate with the expected "programming" achieved in vitro. In this work, a systematic comparison between in vitro and in vivo biomaterial erosion and sequential release was performed for a multilayered association polymer system comprising cellulose acetate phthalate and Pluronic F-127. After assessing the materials during incubation in phosphate-buffered saline, devices were implanted supracalvarially in rats. Devices with two different doses and with different erosion rates were harvested at increasing times post-implantation, and the in vivo thickness loss, mass loss, and the drug release profiles were compared with their in vitro counterparts. The sequential release of four different drugs observed in vitro was successfully translated to in vivo conditions. Results suggest, however, that the total erosion time of the devices was longer and that release rates of the four drugs were different, with drugs initially released more quickly and then more slowly in vivo. Many comparative studies of in vitro and in vivo drug release from biodegradable polymers involved a single drug, whereas this research demonstrated that sequential release of four drugs can be maintained following implantation. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1302-1310, 2016.

  10. Biological studies of matrix metalloproteinase sensitive drug delivery systems

    DEFF Research Database (Denmark)

    Johansen, Pia Thermann

    due to severe side effects as a result of drug distribution to healthy tissues. To enhance ecacy of treatment and improve life quality of patients, tumor specific drug delivery strategies, such as liposome encapsulated drugs, which accumulate in tumor tissue, has gained increased attention. Several...... for delivery of drugs to specific tissues or cells utilizing biological knowledge of cancer tissue is getting increased attention. In this thesis a novel matrix metalloproteinase-2 (MMP-2) sensitive poly-ethylene glycol (PEG) coated liposomal drug delivery system for treatment of cancer was developed...... the use of MMP- 2 as a trigger for liposomal activation in tumor tissue. Thus, this new strategy provides a promising system for specific delivery of encapsulated drugs and controlled release in tumor tissues, resulting in enhanced drug bioavailability and decreased systemic side effects. In addition, we...

  11. Synthesis, characterization, drug release and transdentinal delivery studies of magnetic nanocubes coated with biodegradable poly(2-(dimethyl amino)ethyl methacrylate)

    Science.gov (United States)

    Ajkidkarn, Phranot; Ritprajak, Patcharee; Injumpa, Wishulada; Porntaveetus, Thantrira; Insin, Numpon

    2017-04-01

    Nanotechnology on magnetism and magnetic materials has been developed and studied extensively for the recent decades. Magnetic nanoparticles were applied in magnetic targeting, magnetic drug carriers, and diagnostic materials. In this work, the development of magnetic nanocomposites and their applications as drug carriers for dentistry were investigated. Well-defined ferromagnetic magnetite nanocubes (FMNCs) with the diameter of around 60 nm were synthesized using a thermal decomposition method at 290 °C with iron-oleate complexes as starting materials resulting in nanostructure with high saturation magnetization. The FMNCs were then coated with poly(2-(dimethyl amino)ethyl methacrylate) (PDMAEMA), a water-soluble, biodegradable, and pH-responsive polymer, in order to become good drug carriers with excellent dispersity in biological buffer, low cytotoxicity, and controllable drug release. The polymer coating was performed using atom transfer radical polymerization (ATRP). By using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, FMNCs/PDMAEMA showed the high compatibility in fibroblast and macrophage cell line with the cell viability of more than 80% after incubation with the highest nanocomposites concentration of 100 μg/mL for 24 h. Furthermore, the FMNCs/PDMAEMA subsequently demonstrated the anti-inflammatory effect on macrophages by suppression of pro-inflammatory cytokines, IL-6 and TNF-α production in a dose-dependent manner. The behavior of model drug alkaline hyperchlorite released from the FMNCs/PDMAEMA indicated that the drug release could be controlled by altering pH of the environment. As a result of successfully synthesized FMCNs/PDMAEMA, dentine infiltration of FMNCs/PDMAEMA was performed. It was observed that FMNCs/PDMAEMA could significantly infiltrate the dentine within 30 min under an external magnetic field. Our findings indicated the therapeutic potential of the FMNCs/PDMAEMA as transdentinal drug carriers with its

  12. Advanced drug delivery approaches against periodontitis.

    Science.gov (United States)

    Joshi, Deeksha; Garg, Tarun; Goyal, Amit K; Rath, Goutam

    2016-01-01

    Periodontitis is an inflammatory disease of gums involving the degeneration of periodontal ligaments, creation of periodontal pocket and resorption of alveolar bone, resulting in the disruption of the support structure of teeth. According to WHO, 10-15% of the global population suffers from severe periodontitis. The disease results from the growth of a diverse microflora (especially anaerobes) in the pockets and release of toxins, enzymes and stimulation of body's immune response. Various local or systemic approaches were used for an effective treatment of periodontitis. Currently, controlled local drug delivery approach is more favorable as compared to systemic approach because it mainly focuses on improving the therapeutic outcomes by achieving factors like site-specific delivery, low dose requirement, bypass of first-pass metabolism, reduction in gastrointestinal side effects and decrease in dosing frequency. Overall it provides a safe and effective mode of treatment, which enhances patient compliance. Complete eradication of the organisms from the sites was not achieved by using various surgical and mechanical treatments. So a number of polymer-based delivery systems like fibers, films, chips, strips, microparticles, nanoparticles and nanofibers made from a variety of natural and synthetic materials have been successfully tested to deliver a variety of drugs. These systems are biocompatible and biodegradable, completely fill the pockets, and have strong retention on the target site due to excellent mucoadhesion properties. The review summarizes various available and recently developing targeted delivery devices for the treatment of periodontitis.

  13. Gellified Emulsion of Ofloxacin for Transdermal Drug Delivery System.

    Science.gov (United States)

    Jagdale, Swati; Pawar, Saylee

    2017-06-01

    Purpose: Ofloxacin is a fluoroquinolone with broad-spectrum antibacterial action, used in treatment of systemic and local infections. Ofloxacin is BCS class II drug having low solubility, high permeability with short half-life. The present work was aimed to design, develop and optimize gellified emulsion of Ofloxacin to provide site targeted drug delivery. Transdermal drug delivery will enhance the bioavailability of the drug giving controlled drug release. Methods: Transdermal drug delivery system was designed with gelling agent (Carbopol 940 and HPMC K100M), oil phase (oleic acid) and emulsifying agent (Tween 80: Span 80). Effect of concentration of gelling agent on release of drug from transdermal delivery was studied by 3(2) factorial design. Emulgel was evaluated for physical appearance, pH, drug content, viscosity, spreadability, antimicrobial activity, in- vitro diffusion study and ex-vivo diffusion study. Results: FE-SEM study of the emulsion batch B5 has revealed formation of emulsion globules of approximately size 6-8 µm with -11.2 mV zeta potential showing good stability for the emulsion. Carbopol 940 had shown greater linear effect on drug release and viscosity of the formulations due to its high degree of gelling. In-vitro diffusion study through egg membrane had shown 88.58±1.82 % drug release for optimized batch F4. Ex-vivo diffusion study through goat skin indicated 76.68 ± 2.52% drug release. Conclusion: Controlled release Ofloxacin emulgel exhibiting good in-vitro and ex-vivo drug release proving good antimicrobial property was formulated.

  14. MULTIPARTICULATE DRUG DELIVERY SYSTEM: PELLETIZATION THROUGH EXTRUSION AND SPHERONIZATION

    OpenAIRE

    Anshuli Sharma; Sandhya Chaurasia

    2013-01-01

    Pharmaceutical invention and research are increasingly focusing on delivery systems which enhance desirable therapeutic objectives while minimising side effects. Recent trends indicate that multiparticulate drug delivery systems are especially suitable for achieving controlled or delayed release oral formulations with low risk of dose dumping, flexibility of blending to attain different release patterns as well as reproducible and short gastric residence time. Pelletization is a technique use...

  15. MULTIPARTICULATE DRUG DELIVERY SYSTEM: PELLETIZATION THROUGH EXTRUSION AND SPHERONIZATION

    Directory of Open Access Journals (Sweden)

    Anshuli Sharma

    2013-02-01

    Full Text Available Pharmaceutical invention and research are increasingly focusing on delivery systems which enhance desirable therapeutic objectives while minimising side effects. Recent trends indicate that multiparticulate drug delivery systems are especially suitable for achieving controlled or delayed release oral formulations with low risk of dose dumping, flexibility of blending to attain different release patterns as well as reproducible and short gastric residence time. Pelletization is a technique used to prepare fine powders into pellets used as multiparticulate drug delivery systems. There are different pelletization techniques used to prepare pellets. Extrusion and spheronization is one of them used to prepare pellets drug loaded beads/pellets for extended release or sustained release oral formulations such as tablets and capsules.

  16. Recent advancement of gelatin nanoparticles in drug and vaccine delivery.

    Science.gov (United States)

    Sahoo, Nityananda; Sahoo, Ranjan Ku; Biswas, Nikhil; Guha, Arijit; Kuotsu, Ketousetuo

    2015-11-01

    Novel drug delivery system using nanoscale materials with a broad spectrum of applications provides a new therapeutic foundation for technological integration and innovation. Nanoparticles are suitable drug carrier for various routes of administration as well as rapid recognition by the immune system. Gelatin, the biological macromolecule is a versatile drug/vaccine delivery carrier in pharmaceutical field due to its biodegradable, biocompatible, non-antigenicity and low cost with easy availability. The surface of gelatin nanoparticles can be modified with site-specific ligands, cationized with amine derivatives or, coated with polyethyl glycols to achieve targeted and sustained release drug delivery. Compared to other colloidal carriers, gelatin nanoparticles are better stable in biological fluids to provide the desired controlled and sustained release of entrapped drug molecules. The current review highlights the different formulation aspects of gelatin nanoparticles which affect the particle characteristics like zeta potential, polydispersity index, entrapment efficacy and drug release properties. It has also given emphasis on the major applications of gelatin nanoparticles in drug and vaccine delivery, gene delivery to target tissues and nutraceutical delivery for improving the poor bioavailabity of bioactive phytonutrients.

  17. Transdermal microneedles for drug delivery applications

    Energy Technology Data Exchange (ETDEWEB)

    Teo, Ai Ling [Defence Medical and Environmental Research Institute, DSO National Laboratories (Kent Ridge), 27 Medical Drive, 12-00, Singapore 117510 (Singapore); Shearwood, Christopher [School of Mechanical and Aerospace Engineering, 50 Nanyang Avenue, Singapore 639798 (Singapore); Ng, Kian Chye [Defence Medical and Environmental Research Institute, DSO National Laboratories (Kent Ridge), 27 Medical Drive, 12-00, Singapore 117510 (Singapore); Lu Jia [Defence Medical and Environmental Research Institute, DSO National Laboratories (Kent Ridge), 27 Medical Drive, 12-00, Singapore 117510 (Singapore); Moochhala, Shabbir [Defence Medical and Environmental Research Institute, DSO National Laboratories (Kent Ridge), 27 Medical Drive, 12-00, Singapore 117510 (Singapore)]. E-mail: mshabbir@dso.org.sg

    2006-07-25

    Transdermal drug delivery (TDD) has many advantages, the main one being the ability to maintain the prolonged release of drugs to attain optimal blood concentrations. Unfortunately, nature has provided a very effective protective barrier, the stratum corneum (sc), which limits TDD to certain types of drugs with specific properties. In order to enhance TDD, the idea of using microneedles to painlessly penetrate the sc barrier has previously been proposed. In this paper, we will review the different microneedles that are currently being developed as well as our own efforts in this area. Based on our experiences, we will offer our view on the key parameters for effective transdermal microneedle design as well as future directions in this area.

  18. REVIEW ON FLOATING DRUG DELIVERY SYSTEMS: AN APPROACH TO ORAL CONTROLLED DRUG DELIVERY VIA GASTRIC RETENTION

    Directory of Open Access Journals (Sweden)

    Kadam Shashikant M

    2011-06-01

    Full Text Available Controlled release (CR dosage forms have been extensively used to improve therapy with many important drugs. Several approaches are currently utilized in prolongation of gastric residence time, including floating drug delivery system, swelling and expanding system, polymeric bioadhesive system, modified shape system, high density system and other delayed gastric emptying devices. However, the development processes are faced with several physiological difficulties such as the inability to restrain and localize the system within the desired region of the gastrointestinal tract and the highly variable nature of the gastric emptying process. On the other hand, incorporation of the drug in a controlled release gastroretentive dosage forms (CR-GRDF which can remain in the gastric region for several hours would significantly prolong the gastric residence time of drugs and improve bioavailability, reduce drug waste, and enhance the solubility of drugs that are less soluble in high pH environment. Gastroretention would also facilitate local drug delivery to the stomach and proximal small intestine. Thus, gastroretention could help to provide greater availability of new products and consequently improved therapeutic activity and substantial benefits to patients. The purpose of this paper is to review the recent literature and current technology used in the development of gastroretentive dosage forms.

  19. Polyester Dendrimers: Smart Carriers for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Jean–d’Amour K. Twibanire

    2014-01-01

    Full Text Available Polyester dendrimers have been shown to be outstanding candidates for biomedical applications. Compared to traditional polymeric drug vehicles, these biodegradable dendrimers show excellent advantages especially as drug delivery systems because they are non-toxic. Here, advances on polyester dendrimers as smart carriers for drug delivery applications have been surveyed. Both covalent and non-covalent incorporation of drugs are discussed.

  20. Sulfonate-modified phenylboronic acid-rich nanoparticles as a novel mucoadhesive drug delivery system for vaginal administration of protein therapeutics: improved stability, mucin-dependent release and effective intravaginal placement

    Directory of Open Access Journals (Sweden)

    Li CY

    2016-11-01

    Full Text Available ChunYan Li,1 ZhiGang Huang,2 ZheShuo Liu,1 LiQian Ci,3 ZhePeng Liu,3 Yu Liu,2 XueYing Yan,1 WeiYue Lu2 1School of Pharmacy, Heilongjiang University of Chinese Medicine, Harbin, 2Department of Pharmaceutics, School of Pharmacy, Key Laboratory of Smart Drug Delivery, Ministry of Education, Fudan University, 3School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology, Shanghai, People’s Republic of China Abstract: Effective interaction between mucoadhesive drug delivery systems and mucin is the basis of effective local placement of drugs to play its therapeutic role after mucosal administration including vaginal use, which especially requires prolonged drug presence for the treatment of gynecological infectious diseases. Our previous report on phenylboronic acid-rich nanoparticles (PBNPs demonstrated their strong interaction with mucin and mucin-sensitive release profiles of the model protein therapeutics interferon (IFN in vitro, but their poor stability and obvious tendency to aggregate over time severely limited future application. In this study, sulfonate-modified PBNPs (PBNP-S were designed as a stable mucoadhesive drug delivery system where the negative charges conferred by sulfonate groups prevented aggregation of nanoparticles and the phenylboronic acid groups ensured effective interaction with mucin over a wide pH range. Results suggested that PBNP-S were of spherical morphology with narrow size distribution (123.5 nm, polydispersity index 0.050, good stability over a wide pH range and 3-month storage and considerable in vitro mucoadhesion capability at vaginal pH as shown by mucin adsorption determination. IFN could be loaded to PBNP-S by physical adsorption with high encapsulation efficiency and released in a mucin-dependent manner in vitro. In vivo near-infrared fluorescent whole animal imaging and quantitative vaginal lavage followed by enzyme-linked immunosorbent assay (ELISA assay of

  1. Drug release characteristics of dosage forms:a review

    Institute of Scientific and Technical Information of China (English)

    Satinder Kakar; Ramandeep Singh; Alok Semwal

    2014-01-01

    Area of drug delivery is vast, and various advances have been made in the medical field. Besides the versatility in the dosage forms, various orders for the drug release are known, which includes zero order, first order, Higuchi model, Hixon Crowell model and Korsmeyer Peppas model. In vitro dissolution is recognized as an important element in the development of drug. The nature of the drug such as its shape, crystallinity, particle size and solubility reflects the kinetics of the drug. Various models are used to study the dissolution profiles of the new drug substances. Qualitative and quantitative changes in the drug alters the drug release and performance that is action of drug in the body, which is in vivo performance. Various model dependent methods and model independent methods have been taken into consideration for studying the drug release kinetics.

  2. Fabrication and loading of microcontainers for oral drug delivery

    DEFF Research Database (Denmark)

    Petersen, Ritika Singh

    is achieved. Characterization of spin coating of drug-polymer films is thoroughly performed using microscopy, profilometry, differential scanning calorimetry, Raman spectroscopy, X-ray diffraction and microdissolution release tests. These films are applied for loading of microcontainers. Furosemide which......Oral drug delivery is considered as the most patient compliant delivery route. However, it faces many obstacles, especially due to the ever-increasing number of drugs that are poorly soluble and barely absorbed in the gastro-intestinal tract. Moreover, drugs can degrade in the harsh acidic...... environment of stomach before they reach the intestine. These issues lead to reduced bioavailability of active ingredients. To combat that novel oral drug delivery systems have been developed. Some of these systems that have gained significant interest in this field are reservoir based drug delivery...

  3. Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications

    Science.gov (United States)

    Wang, Qun; Huang, Jian-Ying; Li, Hua-Qiong; Zhao, Allan Zi-Jian; Wang, Yi; Zhang, Ke-Qin; Sun, Hong-Tao; Lai, Yue-Kun

    2017-01-01

    To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs) are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future. PMID:28053530

  4. Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications.

    Science.gov (United States)

    Wang, Qun; Huang, Jian-Ying; Li, Hua-Qiong; Zhao, Allan Zi-Jian; Wang, Yi; Zhang, Ke-Qin; Sun, Hong-Tao; Lai, Yue-Kun

    To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs) are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future.

  5. Cyclodextrin nanoassemblies: a promising tool for drug delivery.

    Science.gov (United States)

    Bonnet, Véronique; Gervaise, Cédric; Djedaïni-Pilard, Florence; Furlan, Aurélien; Sarazin, Catherine

    2015-09-01

    Among the biodegradable and nontoxic compounds that can form nanoparticles for drug delivery, amphiphilic cyclodextrins are very promising. Apart from ionic cyclodextrins, which have been extensively studied and reviewed because of their application in gene delivery, our purpose is to provide a clear description of the supramolecular assemblies of nonionic amphiphilic cyclodextrins, which can form nanoassemblies for controlled drug release. Moreover, we focus on the relationship between their structure and physicochemical characteristics, which is crucial for self assembly and drug delivery. We also highlight the importance of the nanoparticle technology preparation for the stability and application of this nanodevice.

  6. Carbon nanotubes buckypapers for potential transdermal drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Schwengber, Alex [PINMATE-Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, C1428EGA Buenos Aires (Argentina); Prado, Héctor J. [PINMATE-Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, C1428EGA Buenos Aires (Argentina); Cátedra de Tecnología Farmacéutica II, Departamento de Tecnología Farmacéutica, Facultad de Farmacia y Bioquímica, Universidad de Buenos Aires, Junín 956, C1113AAD Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Av. Rivadavia 1917, C1033AAJ Buenos Aires (Argentina); Zilli, Darío A. [PINMATE-Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, C1428EGA Buenos Aires (Argentina); Bonelli, Pablo R. [PINMATE-Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, C1428EGA Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Av. Rivadavia 1917, C1033AAJ Buenos Aires (Argentina); and others

    2015-12-01

    Drug loaded buckypapers based on different types of carbon nanotubes (CNTs) were prepared and characterized in order to evaluate their potentialities for the design of novel transdermal drug delivery systems. Lab-synthesized CNTs as well as commercial samples were employed. Clonidine hydrochloride was used as model drug, and the influence of composition of the drug loaded buckypapers and processing variables on in vitro release profiles was investigated. To examine the influence of the drug nature the evaluation was further extended to buckypapers prepared with flurbiprofen and one type of CNTs, their selection being based on the results obtained with the former drug. Scanning electronic microscopy images indicated that the model drugs were finely dispersed on the CNTs. Differential scanning calorimetry, and X-ray diffraction pointed to an amorphous state of both drugs in the buckypapers. A higher degree of CNT–drug superficial interactions resulted in a slower release of the drug. These interactions were in turn affected by the type of CNTs employed (single wall or multiwall CNTs), their functionalization with hydroxyl or carboxyl groups, the chemical structure of the drug, and the CNT:drug mass ratio. Furthermore, the application of a second layer of drug free CNTs on the loaded buckypaper, led to decelerate the drug release and to reduce the burst effect. - Highlights: • Drug loaded buckypapers from carbon nanotubes were prepared and characterized. • Their potentialities for transdermal drug delivery applications were evaluated. • Characteristics of carbon nanotubes and the structure of the drug affected release • A higher carbon nanotube:drug mass ratio decelerated release • Up to one week controlled release profiles were obtained for the drug flurbiprofen.

  7. REVIEW ON ADVANCES IN COLON TARGETED DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Sunena Sethi, SL Harikumar* and Nirmala

    2012-09-01

    Full Text Available The colon is the terminal part of the GIT which has gained in recent years as a potential site for delivery of various novel therapeutic drugs, i.e. peptides. However, colon is rich in microflora which can be used to target the drug release in the colon. Colon is a site where both local and systemic drug delivery can take place. Local delivery allows the topical treatment of inflammatory bowel disease. If drug can be targeted directly into the colon, treatment can become more effective and side effects can be minimized. These systemic side effects can be minimized by primary approaches for CDDS (Colon specific drug delivery namely prodrugs, pH and time dependent systems and microbially triggered system which gained limited success and have limitations as compared with recently new CDDS namely pressure controlled colon delivery capsules (PCDCS, CODESTM (Novel colon targeted delivery system osmotic controlled drug delivery system, Pulsincap system, time clock system, chronotropic system. This review is to understand the pharmaceutical approaches to colon targeted drug delivery systems for better therapeutic action without compromising on drug degradation (or its low bioavailability.

  8. Microspheres and Nanotechnology for Drug Delivery.

    Science.gov (United States)

    Jóhannesson, Gauti; Stefánsson, Einar; Loftsson, Thorsteinn

    2016-01-01

    Ocular drug delivery to the posterior segment of the eye can be accomplished by invasive drug injections into different tissues of the eye and noninvasive topical treatment. Invasive treatment involves the risks of surgical trauma and infection, and conventional topical treatments are ineffective in delivering drugs to the posterior segment of the eye. In recent years, nanotechnology has become an ever-increasing part of ocular drug delivery. In the following, we briefly review microspheres and nanotechnology for drug delivery to the eye, including different forms of nanotechnology such as nanoparticles, microparticles, liposomes, microemulsions and micromachines. The permeation barriers and anatomical considerations linked to ocular drug delivery are discussed and a theoretical overview on drug delivery through biological membranes is given. Finally, in vitro, in vivo and human studies of x03B3;-cyclodextrin nanoparticle eyedrop suspensions are discussed as an example of nanotechnology used for drug delivery to the eye.

  9. Biodegradable Polymeric Nanoparticles as the Delivery Carrier for Drug.

    Science.gov (United States)

    Zhao, Kai; Li, Dan; Shi, Ci; Ma, Xueling; Rong, Guangu; Kang, Hong; Wang, Xiaohua; Sun, Bin

    2016-01-01

    Drug research and development has entered into the new epoch of innovation formulation, and the drug delivery system has been in the forefront of pharmaceutical innovation. Nanotechnology is widely used in fiber and textiles, electronics, space, agriculture, forensic science and medical therapeutics. It increasingly plays a significant role in drug delivery system. Compared with traditional delivery system, the nanoparticle drug delivery system has lots of merits, such as the high drug loading ability, the excellent biocompatibility, low toxicity, controlled and targeted drug release. We undertook a structured research of biodegradable polymeric nanoparticles used as delivery carrier for drug using a focused review question and inclusion/exclusion criteria. We have searched the bibliographic databases for peerreviewed research literature. The outstanding characteristics of the screened papers were described respectively, and a systematic content analysis methodology was used to analysis the findings. Seventy-three papers were included in the review, the majority defined leadership and governance approaches that had impacted upon the polymeric nanoparticles as the delivery carrier for drug in therapeutic applications and developments. Seven papers outlined the superiority characteristics of polymeric nanoparticles that applied in the field of vaccine. Forty-seven papers overviewed the application prospects of polymeric nanoparticles used as drug delivery carrier for cancer. These included current advances in research and clinical applications of polymeric nanoparticles. The review identified the drug delivery carrier of biodegradable polymeric nanoparticles, and we described the synthesis methods, applications and challenges of polymeric nanoparticles. The findings of this review identified that the biodegradable polymeric nanoparticles were used as delivery carrier for drug currently. It also indicates that the biodegradable polymeric nanoparticles play an

  10. Niosomes: a controlled and novel drug delivery system.

    Science.gov (United States)

    Rajera, Rampal; Nagpal, Kalpana; Singh, Shailendra Kumar; Mishra, Dina Nath

    2011-01-01

    During the past decade formulation of vesicles as a tool to improve drug delivery, has created a lot of interest amongst the scientist working in the area of drug delivery systems. Vesicular system such as liposomes, niosomes, transferosomes, pharmacosomes and ethosomes provide an alternative to improve the drug delivery. Niosomes play an important role owing to their nonionic properties, in such drug delivery system. Design and development of novel drug delivery system (NDDS) has two prerequisites. First, it should deliver the drug in accordance with a predetermined rate and second it should release therapeutically effective amount of drug at the site of action. Conventional dosage forms are unable to meet these requisites. Niosomes are essentially non-ionic surfactant based multilamellar or unilamellar vesicles in which an aqueous solution of solute is entirely enclosed by a membrane resulting from the organization of surfactant macromolecules as bilayer. Niosomes are formed on hydration of non-ionic surfactant film which eventually hydrates imbibing or encapsulating the hydrating aqueous solution. The main aim of development of niosomes is to control the release of drug in a sustained way, modification of distribution profile of drug and for targeting the drug to the specific body site. This paper deals with composition, characterization/evaluation, merits, demerits and applications of niosomes.

  11. Asymmetrical Polymer Vesicles for Drug delivery and Other Applications

    Directory of Open Access Journals (Sweden)

    Yi Zhao

    2017-06-01

    Full Text Available Scientists have been attracted by polymersomes as versatile drug delivery systems since the last two decades. Polymersomes have the potential to be versatile drug delivery systems because of their tunable membrane formulations, stabilities in vivo, various physicochemical properties, controlled release mechanisms, targeting abilities, and capacities to encapsulate a wide range of drugs and other molecules. Asymmetrical polymersomes are nano- to micro-sized polymeric capsules with asymmetrical membranes, which means, they have different outer and inner coronas so that they can exhibit better endocytosis rate and endosomal escape ability than other polymeric systems with symmetrical membranes. Hence, asymmetrical polymersomes are highly promising as self-assembled nano-delivery systems in the future for in vivo therapeutics delivery and diagnostic imaging applications. In this review, we prepared a summary about recent research progresses of asymmetrical polymersomes in the following aspects: synthesis, preparation, applications in drug delivery and others.

  12. A REVIEW ON FLOATING TYPE GASTRORETENTIVE DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Pallavi Pal

    2012-04-01

    Full Text Available Oral controlled release delivery systems are programmed to deliver the drug in predictable time frame that will increase the efficacy and minimize the adverse effects and increase the bioavailability of drugs. Oral route is considered mostnatural, uncomplicated, convenient and safe due to its ease of administration, patient acceptance, and cost-effective manufacturing process.Floating Drug delivery system are designed to prolong the gastric residence time after oral administration, at particular site and controlling the release of drug especially useful for achieving controlled plasma level a swell as improving bioavailability Several approaches are currently being used to prolong the GRT, including floating drug delivery systems (FDDS, also known as hydrodynamically balanced systems (HBS, swelling and expanding systems, high-density systems, and other delayed gastric emptying devices.

  13. Advanced Drug Delivery Systems - a Synthetic and Biological Applied Evaluation

    DEFF Research Database (Denmark)

    Bjerg, Lise Nørkjær

    Specific delivery of drugs to diseased sites in the body is a major topic in the development of drug delivery system today. Especially, the field of cancer treatment needs improved drug delivery systems as the strong dose-limiting side effects of chemotherapy today often present a barrier...... unloading of the encapsulated drug have been tried optimized in a variety of ways. Many propose the use of small molecules, such as vitamins and peptides, for active targeting of the liposomes to overexpressed receptors on the cancerous tissue. Once located close to the diseased site a trigger mechanism...... for releasing the drug from the liposome interior is often needed. Several approaches have been suggested to work as release mechanisms such a pH changes, the presence of enzymes or external applied stimulus as heat or light. Chapter two deals with the synthesis of the functionalized phospholipids, which...

  14. Self-nanoemulsifying drug delivery systems for oral insulin delivery

    DEFF Research Database (Denmark)

    Li, Ping; Tan, Angel; Prestidge, Clive A

    2014-01-01

    This study aims at evaluating the combination of self-nanoemulsifying drug delivery systems (SNEDDS) and enteric-coated capsules as a potential delivery strategy for oral delivery of insulin. The SNEDDS preconcentrates, loaded with insulin-phospholipid complex at different levels (0, 2.5 and 10% w...

  15. Drug delivery systems from nose to brain.

    Science.gov (United States)

    Misra, Ambikanandan; Kher, Gitanjali

    2012-09-01

    The treatment of brain disorders is particularly challenging due to the presence of a variety of formidable obstacles to deliver drugs selectively and effectively to the brain. Blood-brain-barrier (BBB) constitutes the major obstacle to the uptake of drugs into the brain following systemic administration. Intranasal delivery offers a non-invasive and convenient method to bypass the BBB and delivery of therapeutics directly to the brain. The review discusses the potential of intranasal route to deliver drugs to the brain, the mechanisms and pathways of direct nose to brain drug transport, the various factors influencing transnasal drug absorption, the conventional and novel intranasal drug delivery systems, the various intranasal drug delivery techniques and devices, and examples of brain drug transport that have been feasible in treating various brain disorders. Moreover, products on the market, investigational drugs, and the author's perceptions about the prospect of intranasal delivery for treating brain disorders are also been discussed.

  16. Microwave Activation of Drug Release

    DEFF Research Database (Denmark)

    Jónasson, Sævar Þór

    Due to current limitations in control of pharmaceutical drug release in the body along with increasing medicine use, methods of externally-controlled drug release are of high interest. In this thesis, the use of microwaves is proposed as a technique with the purpose of externally activating...... setup, called the microwave activation system has been developed and tested on a body phantom that emulates the human torso. The system presented in this thesis, operates unobtrusively, i.e. without physically interfering with the target (patient). The torso phantom is a simple dual-layered cylindrical...... the phantom is of interest for disclosing essential information about the limitations of the concept, the phantom and the system. For these purposes, a twofold operation of the microwave activation system was performed, which are reciprocal of each other. In the first operation phase, named mapping...

  17. Colloidal drug delivery systems in vaccine delivery.

    Science.gov (United States)

    Beg, Sarwar; Samad, Abdus; Nazish, Iram; Sultana, Ruksar; Rahman, Mahfoozur; Ahmad, Md Zaki; Akbar, Md

    2013-01-01

    Vaccines play a vital role in the field of community medicine to combat against several diseases of human existence. Vaccines primarily trigger the acquired immune system to develop long-lasting immunity against pathogens. Conventional approaches for vaccine delivery lacks potential to target a particular antigen to develop acquired immunity by specific antibodies. Recent advancements in vaccine delivery showed that inclusion of adjuvants in vaccine formulations or delivery of them in a carrier helps in achieving desired targeting ability, reducing the immunogenicity and significant augmentation in the immune response. Colloidal carriers (liposomes, niosomes, microspheres, proteosomes, virosomes and virus like particles (VLPs), antigen cochleates, dendrimers and carbon nanotubes) have been widely explored for vaccine delivery. Further, surface engineering of these carriers with ligands, functional moieties and monoclonal antibodies tend to enhance the immune recognition potential of vaccines by differentiation of antigen specific memory T-cells. The current review, therefore, provides an updated account on the recent advancements in various colloidal delivery systems in vaccine delivery, outlining the mechanism of immune response initiated by them along with potential applications and marketed instances in an explicit manner.

  18. 超临界流体输运技术在缓/控释药物制备中的应用%Applications of Supercritical Fluid Transport Technology in Preparation of Controlled-Release Drug Delivery Systems

    Institute of Scientific and Technical Information of China (English)

    倪敏; 徐琴琴; 徐刚; 王恩俊; 银建中

    2011-01-01

    Among the research of new pharmaceutic dosage forms, controlled-release drug delivery system is a very important issue nowdays. In this field, processes using supercritical fluid technology are mostly " clean" process leading to " clean" products. Meanwhile, inorganic porous materials are emerging as a new category of host/guest systems due to some interesting features such as their biological stability and their drug-releasing properties. This review summarizes the applications of supereritical fluid transport technology in preparation of controlled-release drug delivery system in recent years and pays more attention on the method using supercritical fluid as the solvent and inorganic mesoporous materials as the support to prepare this controlled-release drug delivery system. The technical principle, development of technological process and the main influence factors are discussed here besides the drug release experiments and the comparison with the traditional methods. It shows clearly the advantages and disadvantages of various processes, and sums up the superiority of the supercritical transport technology in preparing controlled-release drug delivery system. Although this technique has lots of advantages, as for the papers delivered at present, the research on supercritical fluid transport technology is just at its initial stage of development because there are so many factors influencing the experimental resuhs and these factors are sometimes link-coupled. It is still challenging to make the preparation controllable. It indicates that the diffusion and penetration of the supercritical carbon dioxide drug solution in porous materials, the surface chemical and physical adsorption mechanism should be focused on as well as the controlled drug release mechanism, thermodynamic model and process dynamic.%缓/控释药物制剂作为一种新药剂是药学研究的热点。本文对近年来超临界流体技术在缓/控释药物系统制备中的研

  19. Colloidal drug delivery systems: current status and future directions.

    Science.gov (United States)

    Garg, Tarun; Rath, Goutam; Goyal, Amit Kumar

    2015-01-01

    In this paper, we provide an overview an extensive range of colloidal drug delivery systems with special focus on vesicular and particulates systems that are being used in research or might be potentially useful as carriers systems for drug or active biomolecules or as cell carriers with application in the therapeutic field. We present some important examples of commercially available drug delivery systems with applications in research or in clinical fields. This class of systems is widely used due to excellent drug targeting, sustained and controlled release behavior, higher entrapment efficiency of drug molecules, prevention of drug hydrolysis or enzymatic degradation, and improvement of therapeutic efficacy. These characteristics help in the selection of suitable carrier systems for drug, cell, and gene delivery in different fields.

  20. Micro fabrication of biodegradable polymer drug delivery devices

    DEFF Research Database (Denmark)

    Nagstrup, Johan

    The pharmaceutical industry is presently facing several obstacles in developing oral drug delivery systems. This is primarily due to the nature of the discovered drug candidates. The discovered drugs often have poor solubility and low permeability across the gastro intestinal epithelium. Furtherm...... the developed devices. Additionally, it has been shown that it is possible to control the release of drug by adding polymeric coatings........ Furthermore, they are often degraded before they can be absorbed. The result is low bioavailability of the drugs. To overcome these challenges, better drug delivery systems need to be developed. Recently, micro systems have emerged as promising candidates to solve the challenges of poor solubility, low...... permeability and degradation. These systems are for the majority based on traditional materials used in micro technology, such as SU-8, silicon, poly(methyl methacrylate). The next step in developing these new drug delivery systems is to replace classical micro fabrication materials with biodegradable polymers...

  1. Layered Double Hydroxide-Based Nanocarriers for Drug Delivery

    Science.gov (United States)

    Bi, Xue; Zhang, Hui; Dou, Liguang

    2014-01-01

    Biocompatible clay materials have attracted particular attention as the efficient drug delivery systems (DDS). In this article, we review developments in the use of layered double hydroxides (LDHs) for controlled drug release and delivery. We show how advances in the ability to synthesize intercalated structures have a significant influence on the development of new applications of these materials. We also show how modification and/or functionalization can lead to new biotechnological and biomedical applications. This review highlights the most recent progresses in research on LDH-based controlled drug delivery systems, focusing mainly on: (i) DDS with cardiovascular drugs as guests; (ii) DDS with anti-inflammatory drugs as guests; and (iii) DDS with anti-cancer drugs as guests. Finally, future prospects for LDH-based drug carriers are also discussed. PMID:24940733

  2. Layered Double Hydroxide-Based Nanocarriers for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Xue Bi

    2014-06-01

    Full Text Available Biocompatible clay materials have attracted particular attention as the efficient drug delivery systems (DDS. In this article, we review developments in the use of layered double hydroxides (LDHs for controlled drug release and delivery. We show how advances in the ability to synthesize intercalated structures have a significant influence on the development of new applications of these materials. We also show how modification and/or functionalization can lead to new biotechnological and biomedical applications. This review highlights the most recent progresses in research on LDH-based controlled drug delivery systems, focusing mainly on: (i DDS with cardiovascular drugs as guests; (ii DDS with anti-inflammatory drugs as guests; and (iii DDS with anti-cancer drugs as guests. Finally, future prospects for LDH-based drug carriers are also discussed.

  3. Assembly of bio-nanoparticles for double controlled drug release.

    Directory of Open Access Journals (Sweden)

    Wei Huang

    Full Text Available A critical limiting factor of chemotherapy is the unacceptably high toxicity. The use of nanoparticle based drug carriers has significantly reduced the side effects and facilitated the delivery of drugs. Source of the remaining side effect includes (1 the broad final in vivo distribution of the administrated nanoparticles, and (2 strong basal drug release from nanoparticles before they could reach the tumor. Despite the advances in pH-triggered release, undesirable basal drug release has been a constant challenge under in vivo conditions. In this study, functionalized single walled carbon nanohorn supported immunoliposomes were assembled for paclitaxel delivery. The immunoliposomes were formulated with polyethylene glycol, thermal stable and pH sensitive phospholipids. Each nanohorn was found to be encapsulated within one immunoliposome. Results showed a highly pH dependent release of paclitaxel in the presence of serum at body temperature with minimal basal release under physiological conditions. Upon acidification, paclitaxel was released at a steady rate over 30 days with a cumulative release of 90% of the loaded drug. The drug release results proved our hypothesized double controlled release mechanism from the nanoparticles. Other results showed the nanoparticles have doubled loading capacity compared to that of traditional liposomes and higher affinity to breast cancer cells overexpressing Her2 receptors. Internalized nanoparticles were found in lysosomes.

  4. Ungual and transungual drug delivery.

    Science.gov (United States)

    Shivakumar, H N; Juluri, Abhishek; Desai, B G; Murthy, S Narasimha

    2012-08-01

    Topical therapy is desirable in treatment of nail diseases like onychomycosis (fungal infection of nail) and psoriasis. The topical treatment avoids the adverse effects associated with systemic therapy, thereby enhancing the patient compliance and reducing the treatment cost. However the effectiveness of the topical therapies has been limited due to the poor permeability of the nail plate to topically applied therapeutic agents. Research over the past one decade has been focused on improving the transungual permeability by means of chemical treatment, penetration enhancers, mechanical and physical methods. The present review is an attempt to discuss the different physical and chemical methods employed to increase the permeability of the nail plate. Minimally invasive electrically mediated techniques such as iontophoresis have gained success in facilitating the transungual delivery of actives. In addition drug transport across the nail plate has been improved by filing the dorsal surface of the nail plate prior to application of topical formulation. But attempts to improve the trans-nail permeation using transdermal chemical enhancers have failed so far. Attempts are on to search suitable physical enhancement techniques and chemical transungual enhancers in view to maximize the drug delivery across the nail plate.

  5. Multifunctional Nanoparticles for Drug Delivery Applications Imaging, Targeting, and Delivery

    CERN Document Server

    Prud'homme, Robert

    2012-01-01

    This book clearly demonstrates the progression of nanoparticle therapeutics from basic research to applications. Unlike other books covering nanoparticles used in medical applications, Multifunctional Nanoparticles for Drug Delivery Applications presents the medical challenges that can be reduced or even overcome by recent advances in nanoscale drug delivery. Each chapter highlights recent progress in the design and engineering of select multifunctional nanoparticles with topics covering targeting, imaging, delivery, diagnostics, and therapy.

  6. POLYURETHANE COMPOSITES AS DRUG CARRIERS:: RELEASE PATTERNS

    Directory of Open Access Journals (Sweden)

    M. V. Grigoreva

    2013-10-01

    Full Text Available Biodegradable polyurethanes attract interest of those developing composite materials for biomedical applications. One of their features is their ability to serve as carriers, or matrixes, for medicines and other bioactive compounds to produce a therapeutic effect in body through targeted and/or prolonged delivery of these compounds in the process of their controlled release from matrix. The review presents polyurethane composites as matrices for a number of drugs. The relation between structure of the composites and their degradability both in vitro and in vivo and the dependence of drug release kinetics on physicochemical properties of polyurethane matrix are highlighted. The release of drugs (cefazolin, naltrexone and piroxicam from the composites based on cross-linked polyurethanes (synthesized from laprols, Mw between 1,500 and 2,000 Da and toluylene diisocyanate demonstrated more or less the same pattern (about 10 days in vitro and three to five days in vivo. In contrast, the composites with dioxydine based on a linear polyurethanes (synthesized from oligotetramethilene glycol, Mw 1,000 Da, diphenylmethane-4,4’-diisocyanate and 1,4-butanediol retained their antimicrobial activity at least 30 days. They also showed a significantly higher breaking strength as compared to that of the composites based on cross-linked polyurethanes.

  7. Electrically responsive smart hydrogels in drug delivery: a review.

    Science.gov (United States)

    Kulkarni, R V; Biswanath, Sa

    2007-01-01

    Recently, much of the research activity has been focused on the development of stimuli-responsive hydrogels. Such hydrogels can show a response to the external or internal stimuli in the form of rapid changes in the physical nature of the polymeric network. This hydrogel property can be utilized for drug delivery applications. A literature search suggests that current research related to stimuli responsive drug delivery systems deals with temperature sensitive, pH sensitive, glucose sensitive and bio-molecule sensitive hydrogels. Electrically responsive hydrogels have also been recently developed in the form of gel matrices, implants and membranes for drug delivery. Control over the release of drugs such as quantity and timing, is essential to optimize drug therapy. Reports say that the electrically controlled in vitro and in vivo drug release studies have been carried out on polyelectrolyte hydrogels. A pulsatile pattern of drug release was achieved with the alternative application and removal of the electrical stimulus. This article gives an overview of the latest developments in the formulation of drug delivery systems using electrically responsive hydrogels.

  8. Novel central nervous system drug delivery systems.

    Science.gov (United States)

    Stockwell, Jocelyn; Abdi, Nabiha; Lu, Xiaofan; Maheshwari, Oshin; Taghibiglou, Changiz

    2014-05-01

    For decades, biomedical and pharmaceutical researchers have worked to devise new and more effective therapeutics to treat diseases affecting the central nervous system. The blood-brain barrier effectively protects the brain, but poses a profound challenge to drug delivery across this barrier. Many traditional drugs cannot cross the blood-brain barrier in appreciable concentrations, with less than 1% of most drugs reaching the central nervous system, leading to a lack of available treatments for many central nervous system diseases, such as stroke, neurodegenerative disorders, and brain tumors. Due to the ineffective nature of most treatments for central nervous system disorders, the development of novel drug delivery systems is an area of great interest and active research. Multiple novel strategies show promise for effective central nervous system drug delivery, giving potential for more effective and safer therapies in the future. This review outlines several novel drug delivery techniques, including intranasal drug delivery, nanoparticles, drug modifications, convection-enhanced infusion, and ultrasound-mediated drug delivery. It also assesses possible clinical applications, limitations, and examples of current clinical and preclinical research for each of these drug delivery approaches. Improved central nervous system drug delivery is extremely important and will allow for improved treatment of central nervous system diseases, causing improved therapies for those who are affected by central nervous system diseases.

  9. Micelles and nanoparticles for ultrasonic drug and gene delivery.

    Science.gov (United States)

    Husseini, Ghaleb A; Pitt, William G

    2008-06-30

    Drug delivery research employing micelles and nanoparticles has expanded in recent years. Of particular interest is the use of these nanovehicles that deliver high concentrations of cytotoxic drugs to diseased tissues selectively, thus reducing the agent's side effects on the rest of the body. Ultrasound, traditionally used in diagnostic medicine, is finding a place in drug delivery in connection with these nanoparticles. In addition to their non-invasive nature and the fact that they can be focused on targeted tissues, acoustic waves have been credited with releasing pharmacological agents from nanocarriers, as well as rendering cell membranes more permeable. In this article, we summarize new technologies that combine the use of nanoparticles with acoustic power both in drug and gene delivery. Ultrasonic drug delivery from micelles usually employs polyether block copolymers and has been found effective in vivo for treating tumors. Ultrasound releases drug from micelles, most probably via shear stress and shock waves from the collapse of cavitation bubbles. Liquid emulsions and solid nanoparticles are used with ultrasound to deliver genes in vitro and in vivo. The small packaging allows nanoparticles to extravasate into tumor tissues. Ultrasonic drug and gene delivery from nanocarriers has tremendous potential because of the wide variety of drugs and genes that could be delivered to targeted tissues by fairly non-invasive means.

  10. Biodegradation-tunable mesoporous silica nanorods for controlled drug delivery.

    Science.gov (United States)

    Park, Sung Bum; Joo, Young-Ho; Kim, Hyunryung; Ryu, WonHyoung; Park, Yong-il

    2015-05-01

    Mesoporous silica in the forms of micro- or nanoparticles showed great potentials in the field of controlled drug delivery. However, for precision control of drug release from mesoporous silica-based delivery systems, it is critical to control the rate of biodegradation. Thus, in this study, we demonstrate a simple and robust method to fabricate "biodegradation-tunable" mesoporous silica nanorods based on capillary wetting of anodic aluminum oxide (AAO) template with an aqueous alkoxide precursor solution. The porosity and nanostructure of silica nanorods were conveniently controlled by adjusting the water/alkoxide molar ratio of precursor solutions, heat-treatment temperature, and Na addition. The porosity and biodegradation kinetics of the fabricated mesoporous nanorods were analyzed using N2 adsorption/desorption isotherm, TGA, DTA, and XRD. Finally, the performance of the mesoporous silica nanorods as drug delivery carrier was demonstrated with initial burst and subsequent "zero-order" release of anti-cancer drug, doxorubicin.

  11. Comparison of ion-activated in situ gelling systems for ocular drug delivery. Part 1: physicochemical characterisation and in vitro release.

    Science.gov (United States)

    Rupenthal, Ilva D; Green, Colin R; Alany, Raid G

    2011-06-15

    Conventional eye drops can result in poor drug bioavailability due to the unique ocular anatomy and physiology. Ion-activated in situ gelling systems are able to crosslink with cations present in the tear fluid, therefore forming a gel on the ocular surface, which results in prolonged corneal contact time. The present study compared a number of anionic polysaccharides (gellan gum, xanthan gum, carrageenan and alginate) to an uncharged (HPMC) and a positively charged (chitosan) polymer system with emphasis on the gelling behaviour, rheological and textural properties, gel microstructure, contact angle and in vitro release characteristics. All systems exhibited physically entangled polymer networks that were able to disentangle upon shear stress and significantly prolonged the in vitro release of a model hydrophilic drug compared to a solution. While systems based on HPMC and chitosan showed no structural changes upon addition of cations, formulations based on gellan gum and carrageenan demonstrated a remarkable increase in viscosity, pseudoplasticity and hardness upon addition of Ca(2+) and K(+) respectively. This renders them favourable for ocular use as they would gel once in contact with the cations of the tear fluid, thus reducing nasolacrimal drainage, but would thin upon shearing, preventing ocular irritation and therefore induced lacrimation.

  12. Critical Assessment of Implantable Drug Delivery Devices in Glaucoma Management

    Directory of Open Access Journals (Sweden)

    Dharani Manickavasagam

    2013-01-01

    Full Text Available Glaucoma is a group of heterogeneous disorders involving progressive optic neuropathy that can culminate into visual impairment and irreversible blindness. Effective therapeutic interventions must address underlying vulnerability of retinal ganglion cells (RGCs to degeneration in conjunction with correcting other associated risk factors (such as elevated intraocular pressure. However, realization of therapeutic outcomes is heavily dependent on suitable delivery system that can overcome myriads of anatomical and physiological barriers to intraocular drug delivery. Development of clinically viable sustained release systems in glaucoma is a widely recognized unmet need. In this regard, implantable delivery systems may relieve the burden of chronic drug administration while potentially ensuring high intraocular drug bioavailability. Presently there are no FDA-approved implantable drug delivery devices for glaucoma even though there are several ongoing clinical studies. The paper critically assessed the prospects of polymeric implantable delivery systems in glaucoma while identifying factors that can dictate (a patient tolerability and acceptance, (b drug stability and drug release profiles, (c therapeutic efficacy, and (d toxicity and biocompatibility. The information gathered could be useful in future research and development efforts on implantable delivery systems in glaucoma.

  13. Preparation of drug delivery systems using supercritical fluid technology.

    Science.gov (United States)

    Kompella, U B; Koushik, K

    2001-01-01

    Small changes in temperature and pressure near the critical region induce dramatic changes in the density and solubility of supercritical fluids, thereby facilitating the use of environmentally benign agents such as CO2 for their solvent and antisolvent properties in processing a wide variety of materials. While supercritical fluid technologies have been in commercial use in the food and chromatography industries for several years, only recently has this technology made inroads in the formulation of drug delivery systems. This review summarizes some of the recent applications of supercritical fluid technology in the preparation of drug delivery systems. Drugs containing polymeric particles, plain drug particles, solute-containing liposomes, and inclusion complexes of drug and carrier have been formulated using this technology. Also, polymer separation using this technology is enabling the selection of a pure fraction of a polymer, thereby allowing a more precise control of drug release from polymeric delivery systems.

  14. Microneedle technologies for (trans)dermal drug and vaccine delivery.

    Science.gov (United States)

    van der Maaden, Koen; Jiskoot, Wim; Bouwstra, Joke

    2012-07-20

    Microneedles have been used for the dermal and transdermal delivery of a broad range of drugs, such as small molecular weight drugs, oligonucleotides, DNA, peptides, proteins and inactivated viruses. However, until now there are no microneedle-based (trans)dermal drug delivery systems on the market. In the past decade various types of microneedles have been developed by a number of production processes. Numerous geometries of microneedles have been designed from various materials. These microneedles have been used for different approaches of microneedle-based (trans)dermal drug delivery. Following a brief introduction about dermal and transdermal drug delivery, this review describes different production methods for solid and hollow microneedles as well as conditions that influence skin penetration. Besides, the four microneedle-based (trans)dermal drug delivery approaches are discussed: "poke and flow", "poke and patch", "poke and release", and "coat and poke". A separate section of this review is devoted to the use of microneedles for the delivery of therapeutic proteins and vaccines. Finally, we give our view on research and development that is needed to render microneedle-based (trans)dermal drug delivery technologies clinically useful in the near future.

  15. Pectin-based colon-specific drug delivery

    Directory of Open Access Journals (Sweden)

    Shailendra Shukla

    2011-01-01

    Full Text Available Colon-specific drug delivery have a great importance in the delivery of drugs for the treatment of local colonic, as well as systemic diseases like Crohn′s disease, ulcerative colitis, colorectal cancer, amoebiasis, asthma, arthritis and inflammation which can be achieved by targeted delivery of drug to colon. Specific systemic absorption in the colon gave interesting possibilities for the delivery of protein and peptides. It contains relatively less proteolytic enzyme activities in the colon compared to the upper gastrointestinal tract (GIT. Recommended treatments included the administration of anti-inflammatory drugs, chemotherapeutic agents and antibiotics which must be released in the colon. Pectin is a naturally occurring polysaccharide has in recent years gained increasingly in importance in advance drug delivery. It was employed in pharmaceutical industry, health promotion and treatment. Owing to its gelling properties it has been used potentially as a carrier for drug delivery to the GIT, such as matrix tablets, gel beads, film-coated dose form. This review will discuss the important chemistry and general properties of pectin, its gel formation mechanism properties and its uses in novel drug delivery to the colon.

  16. Porous Hydroxyapatite Bioceramic Scaffolds for Drug Delivery and Bone Regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Loca, Dagnija; Locs, Janis; Salma, Kristine; Gulbis, Juris; Salma, Ilze; Berzina-Cimdina, Liga, E-mail: dagnija.loca@rtu.l [Riga Technical University, Riga Biomaterials innovation and development centre, Pulka 3/3, LV-1007, Riga (Latvia)

    2011-10-29

    The conventional methods of supplying a patient with pharmacologic active substances suffer from being very poorly selective, so that damage can occurs to the healthy tissues and organs, different from the intended target. In addition, high drug doses can be required to achieve the desired effect. An alternative approach is based on the use of implantable delivery tools, able to release the active substance in a controlled way. In the current research local drug delivery devices containing 8mg of gentamicin sulphate were prepared using custom developed vacuum impregnation technique. In vitro dissolution tests showed that gentamicin release was sustained for 12h. In order to decrease gentamicin release rate, biopolymer coatings were applied and coating structure investigated. The results showed that gentamicin release can be sustained for more than 70h for poly({epsilon}-caprolactone) coated calcium phosphate scaffolds. From poly lactic acid and polyvinyl alcohol coated scaffolds gentamicin was released within 20h and 50h, respectively.

  17. ORAL MULTIPARTICULATE PULSATILE DRUG DELIVERY SYSTEMS: A REVIEW

    Directory of Open Access Journals (Sweden)

    Shaji Jessy

    2011-02-01

    Full Text Available Pulsatile drug delivery aims to release drugs in a planned pattern i.e. at appropriate time and/or at a suitable site of action. Pharmaceutical invention and research are increasingly focusing on delivery systems which enhance desirable therapeutic objectives while minimising side effects. However, in recent pharmaceutical applications involving pulsatile delivery, multiparticulate dosage forms are gaining much favour over single-unit dosage forms because of their potential benefits like predictable gastric emptying, no risk of dose dumping, flexible release patterns and increased bioavailability with less inter- and intra-subject variability. Based on these, the present review aims to study multiparticulate pulsatile delivery systems, for which the Reservoir systems with rupturable polymeric coatings and Reservoir systems with erodible polymer coatings are primarily involved in the control of release. Multiparticulate drug delivery systems provide tremendous opportunities for designing new controlled and delayed release oral formulations, thus extending the frontier of future pharmaceutical development. The development of low density floating multiparticulate pulsed-release dosage forms possessing gastric retention capabilities has also been addressed with increasing focus on the upcoming multiparticulate-pulsatile technologies being exploited on an industrial scale.

  18. Polymeric Micro- and Nanofabricatced Devices for Oral Drug Delivery

    Science.gov (United States)

    Fox, Cade Brylee

    While oral drug administration is by far the most preferred route, it is accompanied by many barriers that limit drug uptake such as the low pH of the stomach, metabolic and proteolytic enzymes, and limited permeability of the intestinal epithelium. As a result, many drugs ranging from small molecules to biological therapeutics have limited oral bioavailability, precluding them from oral administration. To address this issue, microfabrication has been applied to create planar, asymmetric devices capable of binding to the lining of the gastrointestinal tract and releasing drug at high concentrations, thereby increasing oral drug uptake. While the efficacy of these devices has been validated in vitro and in vivo, modifying their surfaces with nanoscale features has potential to refine their properties for enhanced drug delivery. This dissertation first presents an approach to fabricate polymeric microdevices coated with nanowires in a rapid, high throughput manner. The nanowires demonstrate rapid drug localization onto the surface of these devices via capillary action and increased adhesion to epithelial tissue, suggesting that this fabrication technique can be used to create devices with enhanced properties for oral drug delivery. Also presented are microdevices sealed with nanostraw membranes. The nanostraw membranes provide sustained drug release by limiting drug efflux from the devices, prevent drug degradation by limiting influx of outside biomolecules, and enhance device bioadhesion by penetrating into the mucus layer of the intestinal lining. Finally, an approach that dramatically increases the capacity and efficiency of drug loading into microdevices over previous methods is presented. A picoliter-volume printer is used to print drug directly into device reservoirs in an automated fashion. The technologies presented here expand the capabilities of microdevices for oral drug delivery by incorporating nanoscale structures that enhance device bioadhesion

  19. Lipid Based Vesicular Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Shikha Jain

    2014-01-01

    Full Text Available Vesicular drug delivery system can be defined as highly ordered assemblies consisting of one or more concentric bilayers formed as a result of self-assembling of amphiphilic building blocks in presence of water. Vesicular drug delivery systems are particularly important for targeted delivery of drugs because of their ability to localize the activity of drug at the site or organ of action thereby lowering its concentration at the other sites in body. Vesicular drug delivery system sustains drug action at a predetermined rate, relatively constant (zero order kinetics, efficient drug level in the body, and simultaneously minimizes the undesirable side effects. It can also localize drug action in the diseased tissue or organ by targeted drug delivery using carriers or chemical derivatization. Different types of pharmaceutical carriers such as polymeric micelles, particulate systems, and macro- and micromolecules are presented in the form of novel drug delivery system for targeted delivery of drugs. Particulate type carrier also known as colloidal carrier system, includes lipid particles, micro- and nanoparticles, micro- and nanospheres, polymeric micelles and vesicular systems like liposomes, sphingosomes, niosomes, transfersomes, aquasomes, ufasomes, and so forth.

  20. Microemulsion Drug Delivery Systems for Radiopharmacy Studies

    Directory of Open Access Journals (Sweden)

    Emre Ozgenc

    2016-11-01

    Full Text Available Microemulsions have been used increasingly for last year’s because of ideal properties like favorable drug delivery, ease of preparation and physical stability. They have been improved the solubility and efficacy of the drug and reduce the side effects. Use of radiolabeled microemulsions plays an alternative role in drug delivery systems by investigating the formation, stability and application of microemulsions in radiopharmacy. Gama scintigraphic method is well recognized for developing and detecting the biodistribution of newly developed drugs or formulation. This review will focus on how radionuclides are able to play role with characterization studies of microemulsion drug delivery systems.

  1. Nanobiotechnology-based drug delivery in brain targeting.

    Science.gov (United States)

    Dinda, Subas C; Pattnaik, Gurudutta

    2013-01-01

    of specific receptors expressed across the BBB. It is found that the low density lipoproteins related protein (LPR) with engineered peptide compound (EpiC) formed the platform incorporating the Angiopep peptide as a new effective therapeutics. The current challenges are to design and develop the drug delivery careers, which must be able to deliver the drug across the BBB at a safe and effective manner. Nanoparticles are found to be effective careers in delivery of conventional drugs, recombinant proteins, vaccines as well as nucleotides. Nanoparticlulate drug delivery systems are found to be improving in the pharmacokinetic strategies of the drug molecules such as biodistribution, bioavailability and drug release characteristics in a controlled and effective manner with site specific drug delivery targeting to tissue or cell with reduction in toxic manifestation. Therefore, the use of nanotechnology in the field of pharmaceutical biotechnology helps in improving the drug delivery strategy including the kinetics and therapeutic index to solve the delivery problems of some biotech drugs including the recombinant proteins and oligonucleotides. This review is made to provide an insight to the role of nanobiotechnology in drug delivery and drug targeting to brain and its recent advances in the field of drug delivery systems.

  2. Aptamer-Gated Nanoparticles for Smart Drug Delivery

    Directory of Open Access Journals (Sweden)

    Huseyin Avni Oktem

    2011-08-01

    Full Text Available Aptamers are functional nucleic acid sequences which can bind specific targets. An artificial combinatorial methodology can identify aptamer sequences for any target molecule, from ions to whole cells. Drug delivery systems seek to increase efficacy and reduce side-effects by concentrating the therapeutic agents at specific disease sites in the body. This is generally achieved by specific targeting of inactivated drug molecules. Aptamers which can bind to various cancer cell types selectively and with high affinity have been exploited in a variety of drug delivery systems for therapeutic purposes. Recent progress in selection of cell-specific aptamers has provided new opportunities in targeted drug delivery. Especially functionalization of nanoparticles with such aptamers has drawn major attention in the biosensor and biomedical areas. Moreover, nucleic acids are recognized as an attractive building materials in nanomachines because of their unique molecular recognition properties and structural features. A active controlled delivery of drugs once targeted to a disease site is a major research challenge. Stimuli-responsive gating is one way of achieving controlled release of nanoparticle cargoes. Recent reports incorporate the structural properties of aptamers in controlled release systems of drug delivering nanoparticles. In this review, the strategies for using functional nucleic acids in creating smart drug delivery devices will be explained. The main focus will be on aptamer-incorporated nanoparticle systems for drug delivery purposes in order to assess the future potential of aptamers in the therapeutic area. Special emphasis will be given to the very recent progress in controlled drug release based on molecular gating achieved with aptamers.

  3. Electrospun Fibers of Enteric Polymer for Controlled Drug Delivery

    Directory of Open Access Journals (Sweden)

    Fábia F. P. da Costa

    2015-01-01

    Full Text Available The production of electrospun fibers of enteric polymer for controlled delivery of drugs represents a simple and low cost procedure with promising advantages relative to the longer therapeutic window provided by cylindrical geometry in association with intrinsic properties of pH-dependent drug carriers. In this work, we have explored the incorporation of additives (block copolymers of poly(ethylene-b-poly(ethylene oxide into matrix of Eudragit L-100 and the effective action of hybrid composites on delivery of nifedipine, providing improvement in the overall process of controlled release of loaded drug.

  4. Polymeric micelles for acyclovir drug delivery.

    Science.gov (United States)

    Sawdon, Alicia J; Peng, Ching-An

    2014-10-01

    Polymeric prodrug micelles for delivery of acyclovir (ACV) were synthesized. First, ACV was used directly to initiate ring-opening polymerization of ɛ-caprolactone to form ACV-polycaprolactone (ACV-PCL). Through conjugation of hydrophobic ACV-PCL with hydrophilic methoxy poly(ethylene glycol) (MPEG) or chitosan, polymeric micelles for drug delivery were formed. (1)H NMR, FTIR, and gel permeation chromatography were employed to show successful conjugation of MPEG or chitosan to hydrophobic ACV-PCL. Through dynamic light scattering, zeta potential analysis, transmission electron microscopy, and critical micelle concentration (CMC), the synthesized ACV-tagged polymeric micelles were characterized. It was found that the average size of the polymeric micelles was under 200nm and the CMCs of ACV-PCL-MPEG and ACV-PCL-chitosan were 2.0mgL(-1) and 6.6mgL(-1), respectively. The drug release kinetics of ACV was investigated and cytotoxicity assay demonstrates that ACV-tagged polymeric micelles were non-toxic.

  5. Multifaceted Applications of Chitosan in Cancer Drug Delivery and Therapy.

    Science.gov (United States)

    Babu, Anish; Ramesh, Rajagopal

    2017-03-27

    Chitosan is a versatile polysaccharide of biological origin. Due to the biocompatible and biodegradable nature of chitosan, it is intensively utilized in biomedical applications in scaffold engineering as an absorption enhancer, and for bioactive and controlled drug release. In cancer therapy, chitosan has multifaceted applications, such as assisting in gene delivery and chemotherapeutic delivery, and as an immunoadjuvant for vaccines. The present review highlights the recent applications of chitosan and chitosan derivatives in cancer therapy.

  6. Multifaceted Applications of Chitosan in Cancer Drug Delivery and Therapy

    Directory of Open Access Journals (Sweden)

    Anish Babu

    2017-03-01

    Full Text Available Chitosan is a versatile polysaccharide of biological origin. Due to the biocompatible and biodegradable nature of chitosan, it is intensively utilized in biomedical applications in scaffold engineering as an absorption enhancer, and for bioactive and controlled drug release. In cancer therapy, chitosan has multifaceted applications, such as assisting in gene delivery and chemotherapeutic delivery, and as an immunoadjuvant for vaccines. The present review highlights the recent applications of chitosan and chitosan derivatives in cancer therapy.

  7. A Review on Composite Liposomal Technologies for Specialized Drug Delivery

    Directory of Open Access Journals (Sweden)

    Maluta S. Mufamadi

    2011-01-01

    Full Text Available The combination of liposomes with polymeric scaffolds could revolutionize the current state of drug delivery technology. Although liposomes have been extensively studied as a promising drug delivery model for bioactive compounds, there still remain major drawbacks for widespread pharmaceutical application. Two approaches for overcoming the factors related to the suboptimal efficacy of liposomes in drug delivery have been suggested. The first entails modifying the liposome surface with functional moieties, while the second involves integration of pre-encapsulated drug-loaded liposomes within depot polymeric scaffolds. This attempts to provide ingenious solutions to the limitations of conventional liposomes such as short plasma half-lives, toxicity, stability, and poor control of drug release over prolonged periods. This review delineates the key advances in composite technologies that merge the concepts of depot polymeric scaffolds with liposome technology to overcome the limitations of conventional liposomes for pharmaceutical applications.

  8. A DETAILED REVIEW ON ORAL MUCOSAL DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Radha Bhati

    2012-03-01

    Full Text Available Oral mucosal drug delivery system is widely applicable as novel site for administration of drug for immediate and controlled release action by preventing first pass metabolism and enzymatic degradation due to GI microbial flora. Oral mucosal drug delivery system provides local and systemic action. In this review, attention is focused to give regarding physiology of oral mucosal including tissue permeability, barriers to permeation and route of permeation, biopharmaceutics of buccal and sublingual absorption, factors affecting drug absorption, detailed information of penetration enhancers, design of oral mucosal drug delivery system and role of mucoadhesion and various theories of bioadhesion. Evaluation techniques and selection of animal model for in-vivo studies are also discussed.

  9. Porous carriers for controlled/modulated drug delivery.

    Science.gov (United States)

    Ahuja, G; Pathak, K

    2009-11-01

    Considerable research efforts have been directed in recent years towards the development of porous carriers as controlled drug delivery matrices because of possessing several features such as stable uniform porous structure, high surface area, tunable pore size and well-defined surface properties. Owing to wide range of useful properties porous carriers have been used in pharmaceuticals for many purposes including development of floating drug delivery systems, sustained drug delivery systems. Various types of pores like open, closed, transport and blind pores in the porous solid allow them to adsorb drugs and release them in a more reproducible and predictable manner. Pharmaceutically exploited porous adsorbents includes, silica (mesoporous), ethylene vinyl acetate (macroporous), polypropylene foam powder (microporous), titanium dioxide (nanoporous). When porous polymeric drug delivery system is placed in contact with appropriate dissolution medium, release of drug to medium must be preceded by the drug dissolution in the water filled pores or from surface and by diffusion through the water filled channels. The porous carriers are used to improve the oral bioavailability of poorly water soluble drugs, to increase the dissolution of relatively insoluble powders and conversion of crystalline state to amorphous state.

  10. Porous carriers for controlled/modulated drug delivery

    Directory of Open Access Journals (Sweden)

    Ahuja G

    2009-01-01

    Full Text Available Considerable research efforts have been directed in recent years towards the development of porous carriers as controlled drug delivery matrices because of possessing several features such as stable uniform porous structure, high surface area, tunable pore size and well-defined surface properties. Owing to wide range of useful properties porous carriers have been used in pharmaceuticals for many purposes including development of floating drug delivery systems, sustained drug delivery systems. Various types of pores like open, closed, transport and blind pores in the porous solid allow them to adsorb drugs and release them in a more reproducible and predictable manner. Pharmaceutically exploited porous adsorbents includes, silica (mesoporous, ethylene vinyl acetate (macroporous, polypropylene foam powder (microporous, titanium dioxide (nanoporous. When porous polymeric drug delivery system is placed in contact with appropriate dissolution medium, release of drug to medium must be preceded by the drug dissolution in the water filled pores or from surface and by diffusion through the water filled channels. The porous carriers are used to improve the oral bioavailability of poorly water soluble drugs, to increase the dissolution of relatively insoluble powders and conversion of crystalline state to amorphous state.

  11. Applications of polymers in intraocular drug delivery systems

    Science.gov (United States)

    Alhalafi, Ali Mohammed

    2017-01-01

    We are entering a new era of ophthalmic pharmacology where new drugs are rapidly being developed for the treatment of anterior and posterior segment of the eye disease. The pharmacokinetics of drug delivery to the eye remains a very active area of ophthalmic research. Intraocular drug delivery systems allow the release of the drug, bypassing the blood-ocular barrier. The main advantage of these preparations is that they can release the drug over a long time with one single administration. These pharmaceutical systems are of great important in the treatment of the posterior segment diseases, and they can be prepared from biodegradable or nonbiodegradable polymers. Biodegradable polymers have the advantage of disappearing from the site of action after releasing the drug. The majority of intraocular devices are prepared from nonbiodegradable polymers, and they can release controlled amounts of drugs for months. Nonbiodegradable polymers include silicone, polyvinyl alcohol, and ethylene-vinyl acetate. The polymers usually employed to prepare nanoparticles for the topical ophthalmic route are poly (acrylic acid) derivatives (polyalquilcyanocrylates), albumin, poly-ε-caprolactone, and chitosan. Dendrimers are a recent class of polymeric materials with unique nanostructure which has been studied to discover their role in the delivery of therapeutics and imaging agents. Hydrogels are polymers that can swell in aqueous solvent system, and they hold the solvents in a swollen cross-linked gel for delivery. This review exhibits the current literature regarding applications of polymers in ophthalmic drug delivery systems including pharmacokinetics, advantages, disadvantages, and indications aimed to obtain successful eye therapy. Method of Literature Search: A systematic literature review was performed using PubMed databases into two steps. The first step was oriented to classification of intraocular polymers implants focusing on their advantages and disadvantages. The second

  12. Applications of polymers in intraocular drug delivery systems

    Directory of Open Access Journals (Sweden)

    Ali Mohammed Alhalafi

    2017-01-01

    Full Text Available We are entering a new era of ophthalmic pharmacology where new drugs are rapidly being developed for the treatment of anterior and posterior segment of the eye disease. The pharmacokinetics of drug delivery to the eye remains a very active area of ophthalmic research. Intraocular drug delivery systems allow the release of the drug, bypassing the blood–ocular barrier. The main advantage of these preparations is that they can release the drug over a long time with one single administration. These pharmaceutical systems are of great important in the treatment of the posterior segment diseases, and they can be prepared from biodegradable or nonbiodegradable polymers. Biodegradable polymers have the advantage of disappearing from the site of action after releasing the drug. The majority of intraocular devices are prepared from nonbiodegradable polymers, and they can release controlled amounts of drugs for months. Nonbiodegradable polymers include silicone, polyvinyl alcohol, and ethylene-vinyl acetate. The polymers usually employed to prepare nanoparticles for the topical ophthalmic route are poly (acrylic acid derivatives (polyalquilcyanocrylates, albumin, poly-μ-caprolactone, and chitosan. Dendrimers are a recent class of polymeric materials with unique nanostructure which has been studied to discover their role in the delivery of therapeutics and imaging agents. Hydrogels are polymers that can swell in aqueous solvent system, and they hold the solvents in a swollen cross-linked gel for delivery. This review exhibits the current literature regarding applications of polymers in ophthalmic drug delivery systems including pharmacokinetics, advantages, disadvantages, and indications aimed to obtain successful eye therapy. Method of Literature Search: A systematic literature review was performed using PubMed databases into two steps. The first step was oriented to classification of intraocular polymers implants focusing on their advantages and

  13. Dendrimer based nanotherapeutics for ocular drug delivery

    Science.gov (United States)

    Kambhampati, Siva Pramodh

    PAMAM dendrimers are a class of well-defined, hyperbranched polymeric nanocarriers that are being investigated for ocular drug and gene delivery. Their favorable properties such as small size, multivalency and water solubility can provide significant opportunities for many biologically unstable drugs and allows potentially favorable ocular biodistribution. This work exploits hydroxyl terminated dendrimers (G4-OH) as drug/gene delivery vehicles that can target retinal microglia and pigment epithelium via systemic delivery with improved efficacy at much lower concentrations without any side effects. Two different drugs Triamcinolone acetonide (TA) and N-Acetyl Cysteine (NAC) conjugated to G4-OH dendrimers showed tailorable sustained release in physiological relevant solutions and were evaluated in-vitro and in-vivo. Dendrimer-TA conjugates enhanced the solubility of TA and were 100 fold more effective at lower concentrations than free TA in its anti-inflammatory activity in activated microglia and in suppressing VEGF production in hypoxic RPE cells. Dendrimers targeted activated microglia/macrophages and RPE and retained for a period of 21 days in I/R mice model. The relative retention of intravitreal and intravenous dendrimers was comparable, if a 30-fold intravenous dose is used; suggesting intravenous route targeting retinal diseases are possible with dendrimers. D-NAC when injected intravenously attenuated retinal and choroidal inflammation, significantly reduced (˜73%) CNV growth at early stage of AMD in rat model of CNV. A combination therapy of D-NAC + D-TA significantly suppressed microglial activation and promoted CNV regression in late stages of AMD without causing side-effects. G4-OH was modified with linker having minimal amine groups and incorporation of TA as a nuclear localization enhancer resulted in compact gene vectors with favorable safety profile and achieved high levels of transgene expression in hard to transfect human retinal pigment

  14. Microneedle arrays for biosensing and drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Joseph; Windmiller, Joshua Ray; Narayan, Roger; Miller, Philip; Polsky, Ronen; Edwards, Thayne L.

    2017-08-22

    Methods, structures, and systems are disclosed for biosensing and drug delivery techniques. In one aspect, a^ device for detecting an analyte and/or releasing a biochemical into a biological fluid can include an array of hollowed needles, in which each needle includes a protruded needle structure including an exterior wall forming a hollow interior and an opening at a terminal end of the protruded needle structure that exposes the hollow interior, and a probe inside the exterior wall to interact with one or more chemical or biological substances that come in contact with the probe via the opening to produce a probe sensing signal, and an array of wires that are coupled to probes of the array of hollowed needles, respectively, each wire being electrically conductive to transmit the probe sensing signal produced by a respective probe.

  15. Microneedle arrays for biosensing and drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Joseph; Windmiller, Joshua Ray; Narayan, Roger; Miller, Philip

    2017-08-29

    Methods, structures, and systems are disclosed for biosensing and drug delivery techniques. In one aspect, a device for detecting an analyte and/or releasing a biochemical into a biological fluid can include an array of hollowed needles, in which each needle includes a protruded needle structure including an exterior wall forming a hollow interior and an opening at a terminal end of the protruded needle structure that exposes the hollow interior, and a probe inside the exterior wall to interact with one or more chemical or biological substances that come in contact with the probe via the opening to produce a probe sensing signal, and an array of wires that are coupled to probes of the array of hollowed needles, respectively, each wire being electrically conductive to transmit the probe sensing signal produced by a respective probe.

  16. Lysolipid containing liposomes for transendothelial drug delivery

    Directory of Open Access Journals (Sweden)

    Koklic Tilen

    2012-04-01

    transendothelial permeability in presence and absence of albumin. Implications of the hypothesis We propose that lysolipid containing liposomal formulations might be used as nonspecific transendothelial transport vector, since leakage of liposome encapsulated active drug occurs simultaneously with the release of the lysolipids. The concentration of the active drug is therefore expected to be the highest at the site of compromised endothelial barrier. By appropriate choice of the lysolipids an endothelial barrier would stay open only for a short time. Use of such liposomes would potentially maximize the delivery of the drug while limiting the passage of toxic substances and pathogens across the endothelial barrier. Combining lysolipid containing liposomes with superparamagnetic iron oxide nanoparticles or a targeting ligand might be required to efficiently localize drug delivery to a disease affected tissue and to avoid endothelial disruption over the entire body.

  17. Dissolving polymeric microneedle arrays for electrically assisted transdermal drug delivery.

    Science.gov (United States)

    Garland, Martin J; Caffarel-Salvador, Ester; Migalska, Katarzyna; Woolfson, A David; Donnelly, Ryan F

    2012-04-10

    It has recently been proposed that the combination of skin barrier impairment using microneedles (MNs) coupled with iontophoresis (ITP) may broaden the range of drugs suitable for transdermal delivery, as well as enabling the rate of delivery to be achieved with precise electronic control. However, no reports exist on the combination of ITP with in situ drug loaded polymeric MN delivery systems. Furthermore, although a number of studies have highlighted the importance of MN design for transdermal drug delivery enhancement, to date, there has been no systematic investigation of the influence of MN geometry on the performance of polymeric MN arrays which are designed to remain in contact with the skin during the period of drug delivery. As such, for the first time, this study reports on the effect of MN heigth and MN density upon the transdermal delivery of small hydrophilic compounds (theophylline, methylene blue, and fluorescein sodium) across neonatal porcine skin in vitro, with the optimised MN array design evaluated for its potential in the electrically faciliatated delivery of peptide (bovine insulin) and protein (fluorescein isothiocyanate-labelled bovine serum albumin (FTIC-BSA)) macromolecules. The results of the in vitro drug release investigations revealed that the extent of transdermal delivery was dependent upon the design of the MN array employed, whereby an increase in MN height and an increase in MN density led to an increase in the extent of transdermal drug delivery achieved 6h after MN application. Overall, the in vitro permeation studies revealed that the MN design containing 361 MNs/cm(2) of 600 μm height resulted in the greatest extent of transdermal drug delivery. As such, this design was evaluated for its potential in the MN mediated iontophoretic transdermal delivery. Whilst the combination of MN and ITP did not further enhance the extent of small molecular weight solute delivery, the extent of peptide/protein release was significantly

  18. Hyperthermia-Induced Drug Delivery from Thermosensitive Liposomes Encapsulated in an Injectable Hydrogel for Local Chemotherapy

    NARCIS (Netherlands)

    López-Noriega, Adolfo; Hastings, Conn L.; Ozbakir, Burcin; O'Donnell, Kathleen E.; O'Brien, Fergal J.; Storm, Gert; Hennink, Wim E.; Duffy, Garry P.; Ruiz-Hernåndez, Eduardo

    2014-01-01

    A novel drug delivery system, enabling an in situ, thermally triggered drug release is described, consisting of an injectable thermoresponsive chitosan hydrogel containing doxorubicin-loaded thermosensitive liposomes. The design, fabrication, characterization, and an assessment of in vitro bioactivi

  19. Comparative evaluation of the efficacy of two controlled release devices: Chlorhexidine chips and indigenous curcumin based collagen as local drug delivery systems

    Directory of Open Access Journals (Sweden)

    Sruthima N. V. S. Gottumukkala

    2014-01-01

    Full Text Available Aim: To comparatively evaluate the therapeutic efficacy of chlorhexidine (CHX chips (Periocol-CG and indigenous curcumin (CU based collagen as adjuncts to scaling and root planning in the nonsurgical management of chronic periodontitis. Materials and Methods: A total of 120 sites from 60 patients presenting with chronic periodontitis (age group 25-55 years of both sexes, with pocket depth of ≥5 mm with radiographic evidence of bilateral bone loss were earmarked for the study. A split mouth design was employed, and all the clinical parameters-plaque index, gingival index, probing pocket depth (PPD and clinical attachment levels (CAL were recorded at baseline, 1 month, 3 months, and 6 months. However, the microbiological parameters, i.e., N-benzoyl-DL-arginine-β-naphthylamide (BANA test and microbial colony count were recorded at baseline, 3 months and 6 months postoperatively. Results: Significant reduction in plaque and gingival index scores were observed in both groups at the end of the study period, i.e., 6 months. The microbiological parameters (BANA test, microbial colony count, PPD and CAL levels also showed significant improvement in both groups. However, at the end of the study period CHX group showed greater improvement in all of these parameters compared to CU collagen group. Conclusion: Future directions of this study should include targeting the beneficial effects of these local drug delivery systems at varied concentrations so that they could be utilized to achieve the maximum beneficial therapeutic effects in the nonsurgical treatment of periodontal disease.

  20. Hollow Pollen Shells to Enhance Drug Delivery

    Directory of Open Access Journals (Sweden)

    Alberto Diego-Taboada

    2014-03-01

    Full Text Available Pollen grain and spore shells are natural microcapsules designed to protect the genetic material of the plant from external damage. The shell is made up of two layers, the inner layer (intine, made largely of cellulose, and the outer layer (exine, composed mainly of sporopollenin. The relative proportion of each varies according to the plant species. The structure of sporopollenin has not been fully characterised but different studies suggest the presence of conjugated phenols, which provide antioxidant properties to the microcapsule and UV (ultraviolet protection to the material inside it. These microcapsule shells have many advantageous properties, such as homogeneity in size, resilience to both alkalis and acids, and the ability to withstand temperatures up to 250 °C. These hollow microcapsules have the ability to encapsulate and release actives in a controlled manner. Their mucoadhesion to intestinal tissues may contribute to the extended contact of the sporopollenin with the intestinal mucosa leading to an increased efficiency of delivery of nutraceuticals and drugs. The hollow microcapsules can be filled with a solution of the active or active in a liquid form by simply mixing both together, and in some cases operating a vacuum. The active payload can be released in the human body depending on pressure on the microcapsule, solubility and/or pH factors. Active release can be controlled by adding a coating on the shell, or co-encapsulation with the active inside the shell.

  1. Inorganic nanocarriers for platinum drug delivery

    Directory of Open Access Journals (Sweden)

    Ping’an Ma

    2015-12-01

    Full Text Available Nowadays platinum drugs take up almost 50% of all the clinically used anticancer drugs. Besides cisplatin, novel platinum agents including sterically hindered platinum (II drugs, chemically reductive platinum (IV drugs, photosensitive platinum (IV drugs, and multinuclear platinum drugs have been developed recently, with a few entering clinic trials. Rapid development of nanobiotechnology makes targeted delivery of anticancer platinum agents to the tumor site possible, while simultaneously minimizing toxicity and maximizing the drug efficacy. Being versatile drug carriers to deliver platinum drugs, inorganic nanovehicles such as gold nanoparticles, iron oxide nanomaterials, carbon nanotubes, mesoporous nanosilica, metal-organic frameworks (MOFs, have been extensively studied over the past decades. In contrast to conventional polymeric and lipid nanoparticles, inorganic nanoparticles based drug carriers are peculiar as they have shown excellent theranostic effects, revealing themselves an indispensable part of future nanomedicine. Here, we will elaborate recent research advances on fabrication of inorganic nanoparticles for platinum drug delivery.

  2. Polysaccharides in colon-specific drug delivery.

    Science.gov (United States)

    Sinha, V R; Kumria, R

    2001-08-14

    Natural polysaccharides are now extensively used for the development of solid dosage forms for delivery of drug to the colon. The rationale for the development of a polysaccharide based delivery system for colon is the presence of large amounts of polysaccharidases in the human colon as the colon is inhabited by a large number and variety of bacteria which secrete many enzymes e.g. beta-D-glucosidase, beta-D-galactosidase, amylase, pectinase, xylanase, beta-D-xylosidase, dextranase, etc. Various major approaches utilizing polysaccharides for colon-specific delivery are fermentable coating of the drug core, embedding of the drug in biodegradable matrix, formulation of drug-saccharide conjugate (prodrugs). A large number of polysaccharides have already been studied for their potential as colon-specific drug carrier systems, such as chitosan, pectin, chondroitin sulphate, cyclodextrin, dextrans, guar gum, inulin, amylose and locust bean gum. Recent efforts and approaches exploiting these polysaccharides in colon-specific drug delivery are discussed.

  3. Nanoparticle hardness controls the internalization pathway for drug delivery.

    Science.gov (United States)

    Li, Ye; Zhang, Xianren; Cao, Dapeng

    2015-02-14

    Nanoparticle (NP)-based drug delivery systems offer fundamental advantages over current therapeutic agents that commonly display a longer circulation time, lower toxicity, specific targeted release, and greater bioavailability. For successful NP-based drug delivery it is essential that the drug-carrying nanocarriers can be internalized by the target cells and transported to specific sites, and the inefficient internalization of nanocarriers is often one of the major sources for drug resistance. In this work, we use the dissipative particle dynamics simulation to investigate the effect of NP hardness on their internalization efficiency. Three simplified models of NP platforms for drug delivery, including polymeric NP, liposome and solid NP, are designed here to represent increasing nanocarrier hardness. Simulation results indicate that NP hardness controls the internalization pathway for drug delivery. Rigid NPs can enter the cell by a pathway of endocytosis, whereas for soft NPs the endocytosis process can be inhibited or frustrated due to wrapping-induced shape deformation and non-uniform ligand distribution. Instead, soft NPs tend to find one of three penetration pathways to enter the cell membrane via rearranging their hydrophobic and hydrophilic segments. Finally, we show that the interaction between nanocarriers and drug molecules is also essential for effective drug delivery.

  4. Intravenous drug delivery in neonates: lessons learnt.

    Science.gov (United States)

    Sherwin, Catherine M T; Medlicott, Natalie J; Reith, David M; Broadbent, Roland S

    2014-06-01

    Intravenous drug administration presents a series of challenges that relate to the pathophysiology of the neonate and intravenous infusion systems in neonates. These challenges arise from slow intravenous flow rates, small drug volume, dead space volume and limitations on the flush volume in neonates. While there is a reasonable understanding of newborn pharmacokinetics, an appreciation of the substantial delay and variability in the rate of drug delivery from the intravenous line is often lacking. This can lead to difficulties in accurately determining the pharmacokinetic and pharmacodynamic relationship of drugs in the smallest patients. The physical variables that affect the passage of drugs through neonatal lines need to be further explored in order to improve our understanding of their impact on the delivery of drugs by this route in neonates. Through careful investigation, the underlying causes of delayed drug delivery may be identified and administration protocols can then be modified to ensure predictable, appropriate drug input kinetics.

  5. Design, Characterization, and Optimization of Controlled Drug Delivery System Containing Antibiotic Drug/s

    Science.gov (United States)

    Shelate, Pragna; Dave, Divyang

    2016-01-01

    The objective of this work was design, characterization, and optimization of controlled drug delivery system containing antibiotic drug/s. Osmotic drug delivery system was chosen as controlled drug delivery system. The porous osmotic pump tablets were designed using Plackett-Burman and Box-Behnken factorial design to find out the best formulation. For screening of three categories of polymers, six independent variables were chosen for Plackett-Burman design. Osmotic agent sodium chloride and microcrystalline cellulose, pore forming agent sodium lauryl sulphate and sucrose, and coating agent ethyl cellulose and cellulose acetate were chosen as independent variables. Optimization of osmotic tablets was done by Box-Behnken design by selecting three independent variables. Osmotic agent sodium chloride, pore forming agent sodium lauryl sulphate, and coating agent cellulose acetate were chosen as independent variables. The result of Plackett-Burman and Box-Behnken design and ANOVA studies revealed that osmotic agent and pore former had significant effect on the drug release up to 12 hr. The observed independent variables were found to be very close to predicted values of most satisfactory formulation which demonstrates the feasibility of the optimization procedure in successful development of porous osmotic pump tablets containing antibiotic drug/s by using sodium chloride, sodium lauryl sulphate, and cellulose acetate as key excipients. PMID:27610247

  6. An emerging platform for drug delivery: aerogel based systems.

    Science.gov (United States)

    Ulker, Zeynep; Erkey, Can

    2014-03-10

    Over the past few decades, advances in "aerogel science" have provoked an increasing interest for these materials in pharmaceutical sciences for drug delivery applications. Because of their high surface areas, high porosities and open pore structures which can be tuned and controlled by manipulation of synthesis conditions, nanostructured aerogels represent a promising class of materials for delivery of various drugs as well as enzymes and proteins. Along with biocompatible inorganic aerogels and biodegradable organic aerogels, more complex systems such as surface functionalized aerogels, composite aerogels and layered aerogels have also been under development and possess huge potential. Emphasis is given to the details of the aerogel synthesis and drug loading methods as well as the influence of synthesis parameters and loading methods on the adsorption and release of the drugs. Owing to their ability to increase the bioavailability of low solubility drugs, to improve both their stability and their release kinetics, there are an increasing number of research articles concerning aerogels in different drug delivery applications. This review presents an up to date overview of the advances in all kinds of aerogel based drug delivery systems which are currently under investigation.

  7. Carbon nanotubes buckypapers for potential transdermal drug delivery.

    Science.gov (United States)

    Schwengber, Alex; Prado, Héctor J; Zilli, Darío A; Bonelli, Pablo R; Cukierman, Ana L

    2015-12-01

    Drug loaded buckypapers based on different types of carbon nanotubes (CNTs) were prepared and characterized in order to evaluate their potentialities for the design of novel transdermal drug delivery systems. Lab-synthesized CNTs as well as commercial samples were employed. Clonidine hydrochloride was used as model drug, and the influence of composition of the drug loaded buckypapers and processing variables on in vitro release profiles was investigated. To examine the influence of the drug nature the evaluation was further extended to buckypapers prepared with flurbiprofen and one type of CNTs, their selection being based on the results obtained with the former drug. Scanning electronic microscopy images indicated that the model drugs were finely dispersed on the CNTs. Differential scanning calorimetry, and X-ray diffraction pointed to an amorphous state of both drugs in the buckypapers. A higher degree of CNT-drug superficial interactions resulted in a slower release of the drug. These interactions were in turn affected by the type of CNTs employed (single wall or multiwall CNTs), their functionalization with hydroxyl or carboxyl groups, the chemical structure of the drug, and the CNT:drug mass ratio. Furthermore, the application of a second layer of drug free CNTs on the loaded buckypaper, led to decelerate the drug release and to reduce the burst effect.

  8. Synthetic Lipoproteins as Carriers for Drug Delivery.

    Science.gov (United States)

    Huang, Gangliang; Liu, Yang; Huang, Hualiang

    2016-01-01

    Synthetic lipoprotein is an effective carrier of targeted delivery for drugs. It has the very small size, good biocompatibility, suitable half-life, and specific lipoprotein receptorbinding capacity. Compared with the traditional natural lipoprotein, synthetic lipoprotein not only retains the original biological characteristics and functions, but also exhibits the excellent characteristics in drug delivery. Herein, the advantages, development, applications, and prospect of synthetic lipoproteins as drug carriers were summarized.

  9. Drug delivery through soft contact lenses: An introduction

    Directory of Open Access Journals (Sweden)

    Gourishanker Jha

    2011-01-01

    Full Text Available Current ophthalmic drug delivery systems are insufficient, specifically eye drops, which allow approximately 95% of the drug contained in the drops to be lost due to absorption through the conjunctiva or through the tear drainage. The use of soft contact lenses has been proposed as a method to deliver drugs to the eye in an efficient manner. The contact lenses restrict the drug from being lost to tear drainage by releasing the drug into two tear layers on either side of the contact lens, where it ultimately diffuses into the eye. By using loaded soft contact lenses, continuous drug release for extended period is possible. This paper focuses on the different methods of drug loading used throughout a polymer hydrogel.

  10. Molecularly imprinted polymers as the future drug delivery devices.

    Science.gov (United States)

    Luliński, Piotr

    2013-01-01

    In recent years, the investigations of new drug delivery systems have been directed on the development of some "intelligent" drug delivery devices that are able to directly respond to the patient's individual needs. New drug delivery systems should maximize the efficiency of administrated therapeutic agents and improve the patient's quality of life. Introduction of the new drug delivery devices is an important scientific goal, which could be achieved by combining new technologies and intelligent biomaterials. Molecular imprinting technology has a high potential for the preparation of optimized drug delivery forms. Here, molecularly imprinted polymers (MIPs) are promising new materials for such purposes, but their application in this field is nowadays at a developing stage. In this review, the principles of molecular imprinting and the recognition-release mechanisms of polymeric matrices are discussed. The potential application of molecularly imprinted materials as the future drug delivery systems with various administering routes (transdermal, ocular or oral) are presented, and some future prospects for the imprinted polymers are outlined.

  11. AQUASOMES: A NOVEL CARRIER FOR DRUG DELIVERY

    Directory of Open Access Journals (Sweden)

    Vishal Sutariya

    2012-03-01

    Full Text Available Nanobiopharmaceutics involves delivery of biopharmaceutical product through different biomaterials like multifunctional nanoparticles, quantum dots, aquasomes, superparamagnetic iron oxide crystals, and liposomes dendrimers. Nanotechnology has emerged fields of biomedical research in the last few decades the presents context is an attempt to present the brief information about nanobiotechnological applications. Aquasomes are nanoparticulate carrier system but instead of being simple nanoparticles these arse three layered self assembled structures, comprised of a solid phase nanocrystalline core coated with oligomeric film to which biochemically active molecules are adsorbed with or without modification. Aquasomes are spherical 60–300 nm particles used for drug and antigen delivery. Aquasomes discovery comprises a principle from microbiology, food chemistry, biophysics and many discoveries including solid phase synthesis, supramolecular chemistry, molecular shape change and self assembly. Three types of core materials are mainly used for producing aquasomes: tin oxide, nanocrystalline carbon ceramics (diamonds and brushite (calcium phosphate dihydrate. Calcium phosphate is the core of interest, owing to its natural presence in the body. The brushite is unstable and converts to hydroxyapatite upon prolong storage. Hydroxyapatite seems, therefore, a better core for the preparation of aquasomes. It is widely used for the preparation of implants for drug delivery. The solid core provides the structural stability, while the carbohydrate coating protects against dehydration and stabilizes the biochemically active molecules. This property of maintaining the conformational integrity of bioactive molecules has led to the proposal that aquasomes have potential as a carrier system for delivery of peptide, protein, hormones, antigens and genes to specific sites. Aquasome deliver their content through specific targeting, molecular sheiling and slow

  12. Trojan-horse nanotube on-command intracellular drug delivery.

    Science.gov (United States)

    Wu, Chia-Hsuan; Cao, Cong; Kim, Jin Ho; Hsu, Chih-Hsun; Wanebo, Harold J; Bowen, Wayne D; Xu, Jimmy; Marshall, John

    2012-11-14

    A major challenge to nanomaterial-based medicine is the ability to release drugs on-command. Here, we describe an innovative drug delivery system based on carbon nanotubes (CNTs), in which compounds can be released inside cells from within the nanotube "on-command" by inductive heating with an external alternating current or pulsed magnetic field. Without inductive heating the drug remains safely inside the CNTs, showing no toxicity in cell viability tests. Similar to the "Trojan-Horse" in function, we demonstrate the delivery of a combination of chemotherapeutic agents with low aqueous solubility, paclitaxel (Taxol), and C6-ceramide, to multidrug resistant pancreatic cancer cells. Nanotube encapsulation permitted the drugs to be used at a 100-fold lower concentration compared to exogenous treatment yet achieve a comparable ~70% cancer kill rate.

  13. In vitro sustained release study of gallic acid coated with magnetite-PEG and magnetite-PVA for drug delivery system.

    Science.gov (United States)

    Dorniani, Dena; Kura, Aminu Umar; Hussein-Al-Ali, Samer Hasan; Bin Hussein, Mohd Zobir; Fakurazi, Sharida; Shaari, Abdul Halim; Ahmad, Zalinah

    2014-01-01

    The efficacy of two nanocarriers polyethylene glycol and polyvinyl alcohol magnetic nanoparticles coated with gallic acid (GA) was accomplished via X-ray diffraction, infrared spectroscopy, magnetic measurements, thermal analysis, and TEM. X-ray diffraction and TEM results showed that Fe3O4 nanoparticles were pure iron oxide having spherical shape with the average diameter of 9 nm, compared with 31 nm and 35 nm after coating with polyethylene glycol-GA (FPEGG) and polyvinyl alcohol-GA (FPVAG), respectively. Thermogravimetric analyses proved that after coating the thermal stability was markedly enhanced. Magnetic measurements and Fourier transform infrared (FTIR) revealed that superparamagnetic iron oxide nanoparticles could be successfully coated with two polymers (PEG and PVA) and gallic acid as an active drug. Release behavior of gallic acid from two nanocomposites showed that FPEGG and FPVAG nanocomposites were found to be sustained and governed by pseudo-second-order kinetics. Anticancer activity of the two nanocomposites shows that the FPEGG demonstrated higher anticancer effect on the breast cancer cell lines in almost all concentrations tested compared to FPVAG.

  14. In Vitro Sustained Release Study of Gallic Acid Coated with Magnetite-PEG and Magnetite-PVA for Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Dena Dorniani

    2014-01-01

    Full Text Available The efficacy of two nanocarriers polyethylene glycol and polyvinyl alcohol magnetic nanoparticles coated with gallic acid (GA was accomplished via X-ray diffraction, infrared spectroscopy, magnetic measurements, thermal analysis, and TEM. X-ray diffraction and TEM results showed that Fe3O4 nanoparticles were pure iron oxide having spherical shape with the average diameter of 9 nm, compared with 31 nm and 35 nm after coating with polyethylene glycol-GA (FPEGG and polyvinyl alcohol-GA (FPVAG, respectively. Thermogravimetric analyses proved that after coating the thermal stability was markedly enhanced. Magnetic measurements and Fourier transform infrared (FTIR revealed that superparamagnetic iron oxide nanoparticles could be successfully coated with two polymers (PEG and PVA and gallic acid as an active drug. Release behavior of gallic acid from two nanocomposites showed that FPEGG and FPVAG nanocomposites were found to be sustained and governed by pseudo-second-order kinetics. Anticancer activity of the two nanocomposites shows that the FPEGG demonstrated higher anticancer effect on the breast cancer cell lines in almost all concentrations tested compared to FPVAG.

  15. Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Dipendu [ORNL; Warren, Kaitlyn E [ORNL; Naskar, Amit K [ORNL

    2014-01-01

    Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

  16. Use of microwave in processing of drug delivery systems.

    Science.gov (United States)

    Wong, T W

    2008-04-01

    Microwave has received a widespread application in pharmaceuticals and food processing, microbial sterilization, biomedical therapy, scientific and biomedical analysis, as well as, drug synthesis. This paper reviews the basis of application of microwave to prepare pharmaceutical dosage forms such as agglomerates, gel beads, microspheres, nanomatrix, solid dispersion, tablets and film coat. The microwave could induce drying, polymeric crosslinkages as well as drug-polymer interaction, and modify the structure of drug crystallites via its effects of heating and/or electromagnetic field on the dosage forms. The use of microwave opens a new approach to control the physicochemical properties and drug delivery profiles of pharmaceutical dosage forms without the need for excessive heat, lengthy process or toxic reactants. Alternatively, the microwave can be utilized to process excipients prior to their use in the formulation of drug delivery systems. The intended release characteristics of drugs in dosage forms can be met through modifying the physicochemical properties of excipients using the microwave.

  17. A smart multifunctional drug delivery nanoplatform for targeting cancer cells

    Science.gov (United States)

    Hoop, M.; Mushtaq, F.; Hurter, C.; Chen, X.-Z.; Nelson, B. J.; Pané, S.

    2016-06-01

    Wirelessly guided magnetic nanomachines are promising vectors for targeted drug delivery, which have the potential to minimize the interaction between anticancer agents and healthy tissues. In this work, we propose a smart multifunctional drug delivery nanomachine for targeted drug delivery that incorporates a stimuli-responsive building block. The nanomachine consists of a magnetic nickel (Ni) nanotube that contains a pH-responsive chitosan hydrogel in its inner cavity. The chitosan inside the nanotube serves as a matrix that can selectively release drugs in acidic environments, such as the extracellular space of most tumors. Approximately a 2.5 times higher drug release from Ni nanotubes at pH = 6 is achieved compared to that at pH = 7.4. The outside of the Ni tube is coated with gold. A fluorescein isothiocyanate (FITC) labeled thiol-ssDNA, a biological marker, was conjugated on its surface by thiol-gold click chemistry, which enables traceability. The Ni nanotube allows the propulsion of the device by means of external magnetic fields. As the proposed nanoarchitecture integrates different functional building blocks, our drug delivery nanoplatform can be employed for carrying molecular drug conjugates and for performing targeted combinatorial therapies, which can provide an alternative and supplementary solution to current drug delivery technologies.Wirelessly guided magnetic nanomachines are promising vectors for targeted drug delivery, which have the potential to minimize the interaction between anticancer agents and healthy tissues. In this work, we propose a smart multifunctional drug delivery nanomachine for targeted drug delivery that incorporates a stimuli-responsive building block. The nanomachine consists of a magnetic nickel (Ni) nanotube that contains a pH-responsive chitosan hydrogel in its inner cavity. The chitosan inside the nanotube serves as a matrix that can selectively release drugs in acidic environments, such as the extracellular space of

  18. Radiation sterilization of new drug delivery systems.

    Science.gov (United States)

    Abuhanoğlu, Gürhan; Ozer, A Yekta

    2014-06-01

    Radiation sterilization has now become a commonly used method for sterilization of several active ingredients in drugs or drug delivery systems containing these substances. In this context, many applications have been performed on the human products that are required to be sterile, as well as on pharmaceutical products prepared to be developed. The new drug delivery systems designed to deliver the medication to the target tissue or organ, such as microspheres, nanospheres, microemulsion, and liposomal systems, have been sterilized by gamma (γ) and beta (β) rays, and more recently, by e-beam sterilization. In this review, the sterilization of new drug delivery systems was discussed other than conventional drug delivery systems by γ irradiation.

  19. Novel targeted bladder drug-delivery systems: a review

    Directory of Open Access Journals (Sweden)

    Zacchè MM

    2015-11-01

    Full Text Available Martino Maria Zacchè, Sushma Srikrishna, Linda Cardozo Department of Urogynaecology, King's College Hospital, London, UK Abstract: The objective of pharmaceutics is the development of drugs with increased efficacy and reduced side effects. Prolonged exposure of the diseased tissue to the drug is of crucial importance. Drug-delivery systems (DDSs have been introduced to control rate, time, and place of release. Drugs can easily reach the bladder through a catheter, while systemically administered agents may undergo extensive metabolism. Continuous urine filling and subsequent washout hinder intravesical drug delivery (IDD. Moreover, the low permeability of the urothelium, also described as the bladder permeability barrier, poses a major challenge in the development of the IDD. DDSs increase bioavailability of drugs, therefore improving therapeutic effect and patient compliance. This review focuses on novel DDSs to treat bladder conditions such as overactive bladder, interstitial cystitis, bladder cancer, and recurrent urinary tract infections. The rationale and strategies for both systemic and local delivery methods are discussed, with emphasis on new formulations of well-known drugs (oxybutynin, nanocarriers, polymeric hydrogels, intravesical devices, encapsulated DDSs, and gene therapy. We give an overview of current and future prospects of DDSs for bladder disorders, including nanotechnology and gene therapy. Keywords: drug targeting, drug-delivery system, bladder disorders

  20. Recent development in novel drug delivery systems of herbal drugs

    OpenAIRE

    Mayank Chaturvedi; Manish Kumar; Amit Sinhal; Alimuddin Saifi

    2011-01-01

    Novel technologies have been developed recently for drug delivery systems. The use of herbal formulations for novel drug delivery systems is more advantageous and has more benefits compared to others. The use of liposome, ethosome, phytosomes, emulsion, microsphere, solid lipid nanoparticles of herbal formulation has enhanced the therapeutic effects of plant extracts. With the use of all these, targeted delivery of the formulation is achieved, due to which the formulation demonstrates effect ...

  1. Nanoscale coordination polymers for anticancer drug delivery

    Science.gov (United States)

    Phillips, Rachel Huxford

    This dissertation reports the synthesis and characterization of nanoscale coordination polymers (NCPs) for anticancer drug delivery. Nanoparticles have been explored in order to address the limitations of small molecule chemotherapeutics. NCPs have been investigated as drug delivery vehicles as they can exhibit the same beneficial properties as the bulk metal-organic frameworks as well as interesting characteristics that are unique to nanomaterials. Gd-MTX (MTX = methotrexate) NCPs with a MTX loading of 71.6 wt% were synthesized and stabilized by encapsulation within a lipid bilayer containing anisamide (AA), a small molecule that targets sigma receptors which are overexpressed in many cancer tissues. Functionalization with AA allows for targeted delivery and controlled release to cancer cells, as shown by enhanced efficacy against leukemia cells. The NCPs were doped with Ru(bpy)32+ (bpy = 2,2'-bipyridine), and this formulation was utilized as an optical imaging agent by confocal microscopy. NCPs containing the chemotherapeutic pemetrexed (PMX) were synthesized using different binding metals. Zr-based materials could not be stabilized by encapsulation with a lipid bilayer, and Gd-based materials showed that PMX had degraded during synthesis. However, Hf-based NCPs containing 19.7 wt% PMX were stabilized by a lipid coating and showed in vitro efficacy against non-small cell lung cancer (NSCLC) cell lines. Enhanced efficacy was observed for formulations containing AA. Additionally, NCP formulations containing the cisplatin prodrug disuccinatocisplatin were prepared; one of these formulations could be stabilized by encapsulation within a lipid layer. Coating with a lipid layer doped with AA rendered this formulation an active targeting agent. The resulting formulation proved more potent than free cisplatin in NSCLC cell lines. Improved NCP uptake was demonstrated by confocal microscopy and competitive binding assays. Finally, a Pt(IV) oxaliplatin prodrug was

  2. Smart linkers in polymer-drug conjugates for tumor-targeted delivery.

    Science.gov (United States)

    Chang, Minglu; Zhang, Fang; Wei, Ting; Zuo, Tiantian; Guan, Yuanyuan; Lin, Guimei; Shao, Wei

    2016-01-01

    To achieve effective chemotherapy, many types of drug delivery systems have been developed for the specific environments in tumor tissues. Polymer-drug conjugates are increasingly used in tumor therapy due to several significant advantages over traditional delivery systems. In the fabrication of polymer-drug conjugates, a smart linker is an important component that joins two fragments or molecules together and can be cleared by a specific stimulus, which results in targeted drug delivery and controlled release. By regulating the conjugation between the drug and the nanocarriers, stimulus-sensitive systems based on smart linkers can offer high payloads, certified stability, controlled release and targeted delivery. In this review, we summarize the current state of smart linkers (e.g. disulfide, hydrazone, peptide, azo) used recently in various polymer-drug conjugate-based delivery systems with a primary focus on their sophisticated design principles and drug delivery mechanisms as well as in vivo processes.

  3. Silk Fibroin-Based Nanoparticles for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Zheng Zhao

    2015-03-01

    Full Text Available Silk fibroin (SF is a protein-based biomacromolecule with excellent biocompatibility, biodegradability and low immunogenicity. The development of SF-based nanoparticles for drug delivery have received considerable attention due to high binding capacity for various drugs, controlled drug release properties and mild preparation conditions. By adjusting the particle size, the chemical structure and properties, the modified or recombinant SF-based nanoparticles can be designed to improve the therapeutic efficiency of drugs encapsulated into these nanoparticles. Therefore, they can be used to deliver small molecule drugs (e.g., anti-cancer drugs, protein and growth factor drugs, gene drugs, etc. This paper reviews recent progress on SF-based nanoparticles, including chemical structure, properties, and preparation methods. In addition, the applications of SF-based nanoparticles as carriers for therapeutic drugs are also reviewed.

  4. Advances in the Applications of Polyhydroxyalkanoate Nanoparticles for Novel Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Anupama Shrivastav

    2013-01-01

    Full Text Available Drug delivery technology is emerging as an interdisciplinary science aimed at improving human health. The controlled delivery of pharmacologically active agents to the specific site of action at the therapeutically optimal rate and dose regimen has been a major goal in designing drug delivery systems. Over the past few decades, there has been considerable interest in developing biodegradable drug carriers as effective drug delivery systems. Polymeric materials from natural sources play an important role in controlled release of drug at a particular site. Polyhydroxyalkanoates, due to their origin from natural sources, are given attention as candidates for drug delivery materials. Biodegradable and biocompatible polyhydroxyalkanoates are linear polyesters produced by microorganisms under unbalanced growth conditions, which have emerged as potential polymers for use as biomedical materials for drug delivery due to their unique physiochemical and mechanical properties. This review summarizes many of the key findings in the applications of polyhydroxyalkanoates and polyhydroxyalkanoate nanoparticles for drug delivery system.

  5. Polymeric Plant-derived Excipients in Drug Delivery

    Directory of Open Access Journals (Sweden)

    Josias H. Hamman

    2009-07-01

    Full Text Available Drug dosage forms contain many components in addition to the active pharmaceutical ingredient(s to assist in the manufacturing process as well as to optimise drug delivery. Due to advances in drug delivery technology, excipients are currently included in novel dosage forms to fulfil specific functions and in some cases they directly or indirectly influence the extent and/or rate of drug release and absorption. Since plant polysaccharides comply with many requirements expected of pharmaceutical excipients such as non-toxicity, stability, availability and renewability they are extensively investigated for use in the development of solid oral dosage forms. Furthermore, polysaccharides with varying physicochemical properties can be extracted from plants at relatively low cost and can be chemically modified to suit specific needs. As an example, many polysaccharide-rich plant materials are successfully used as matrix formers in modified release dosage forms. Some natural polysaccharides have even shown environmental-responsive gelation characteristics with the potential to control drug release according to specific therapeutic needs. This review discusses some of the most important plant-derived polymeric compounds that are used or investigated as excipients in drug delivery systems.

  6. Designer lipids for drug delivery: from heads to tails

    Science.gov (United States)

    Kohli, Aditya G.; Kierstead, Paul H.; Venditto, Vincent J.; Walsh, Colin L.; Szoka, Francis C.

    2014-01-01

    For four decades, liposomes composed of both naturally occurring and synthetic lipids have been investigated as delivery vehicles for low molecular weight and macromolecular drugs. These studies paved the way for the clinical and commercial success of a number of liposomal drugs, each of which required a tailored formulation; one liposome size does not fit all drugs! Instead, the physicochemical properties of the liposome must be matched to the pharmacology of the drug. An extensive biophysical literature demonstrates that varying lipid composition can influence the size, membrane stability, in vivo interactions, and drug release properties of a liposome. In this review we focus on recently described synthetic lipid headgroups, linkers and hydrophobic domains that can provide control over the intermolecular forces, phase preference, and macroscopic behavior of liposomes. These synthetic lipids further our understanding of lipid biophysics, promote targeted drug delivery, and improve liposome stability. We further highlight the immune reactivity of novel synthetic headgroups as a key design consideration. For instance it was originally thought that synthetic PEGylated lipids were immunologically inert; however, it’s been observed that under certain conditions PEGylated lipids induce humoral immunity. Such immune activation may be a limitation to the use of other engineered lipid headgroups for drug delivery. In addition to the potential immunogenicity of engineered lipids, future investigations on liposome drugs in vivo should pay particular attention to the location and dynamics of payload release. PMID:24816069

  7. A concise review on smart polymers for controlled drug release.

    Science.gov (United States)

    Aghabegi Moghanjoughi, Arezou; Khoshnevis, Dorna; Zarrabi, Ali

    2016-06-01

    Design and synthesis of efficient drug delivery systems are of critical importance in health care management. Innovations in materials chemistry especially in polymer field allows introduction of advanced drug delivery systems since polymers could provide controlled release of drugs in predetermined doses over long periods, cyclic and tunable dosages. To this end, researchers have taken advantages of smart polymers since they can undergo large reversible, chemical, or physical fluctuations as responses to small changes in environmental conditions, for instance, in pH, temperature, light, and phase transition. The present review aims to highlight various kinds of smart polymers, which are used in controlled drug delivery systems as well as mechanisms of action and their applications.

  8. Lipid nanoparticles for dermal drug delivery.

    Science.gov (United States)

    Kakadia, Pratibha G; Conway, Barbara R

    2015-01-01

    Lipid based drug delivery systems have been widely studied and reported over the past decade and offer a useful alternative to other colloidal drug delivery systems. Skin is a popular route of drug delivery for locally and systemically acting drugs and nanoparticles are reported as a potential formulation strategy for dermal delivery. Although the skin acts as a natural physical barrier against penetration of foreign materials, including particulates, opportunities exist for the delivery of therapeutic nanoparticles, especially in diseased and damaged skin and via appendageal routes such as the openings of hair follicles. The extent and ability of nanoparticles to penetrate into the underlying viable tissue is still the subject of debate although recent studies have identified the follicular route as the most likely route of entry; this influences the potential applications of these dosage forms as a drug delivery strategy. This paper reviews present state of art of lipid-based nanocarriers focussing on solid lipid nanoparticles, nanostructured lipid carriers and nanoemulsions, their production methods, potential advantages and applications in dermal drug delivery.

  9. Carbon nanotubes hybrid hydrogels in drug delivery: a perspective review.

    Science.gov (United States)

    Cirillo, Giuseppe; Hampel, Silke; Spizzirri, Umile Gianfranco; Parisi, Ortensia Ilaria; Picci, Nevio; Iemma, Francesca

    2014-01-01

    The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability) with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior). The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review.

  10. Carbon Nanotubes Hybrid Hydrogels in Drug Delivery: A Perspective Review

    Directory of Open Access Journals (Sweden)

    Giuseppe Cirillo

    2014-01-01

    Full Text Available The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior. The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review.

  11. Drug delivery via porous silicon: a focused patent review.

    Science.gov (United States)

    Kulyavtsev, Paulina A; Spencer, Roxanne P

    2017-03-01

    Although silicon is more commonly associated with computer chips than with drug delivery, with the discovery that porous silicon is a viable biocompatible material, mesoporous silicon with pores between 2 and 50 nm has been loaded with small molecule and biomolecule therapeutics and safely implanted for controlled release. As porous silicon is readily oxidized, porous silica must also be considered for drug delivery applications. Since 2010, only a limited number of US patents have been granted, primarily for ophthalmologic and immunotherapy applications, in contrast to the growing body of technical literature in this area.

  12. Hydrophobic Drug-Loaded PEGylated Magnetic Liposomes for Drug-Controlled Release

    Science.gov (United States)

    Hardiansyah, Andri; Yang, Ming-Chien; Liu, Ting-Yu; Kuo, Chih-Yu; Huang, Li-Ying; Chan, Tzu-Yi

    2017-05-01

    Less targeted and limited solubility of hydrophobic-based drug are one of the serious obstacles in drug delivery system. Thus, new strategies to enhance the solubility of hydrophobic drug and controlled release behaviors would be developed. Herein, curcumin, a model of hydrophobic drug, has been loaded into PEGylated magnetic liposomes as a drug carrier platform for drug controlled release system. Inductive magnetic heating (hyperthermia)-stimulated drug release, in vitro cellular cytotoxicity assay of curcumin-loaded PEGylated magnetic liposomes and cellular internalization-induced by magnetic guidance would be investigated. The resultant of drug carriers could disperse homogeneously in aqueous solution, showing a superparamagnetic characteristic and could inductive magnetic heating with external high-frequency magnetic field (HFMF). In vitro curcumin release studies confirmed that the drug carriers exhibited no significant release at 37 °C, whereas exhibited rapid releasing at 45 °C. However, it would display enormous (three times higher) curcumin releasing under the HFMF exposure, compared with that without HFMF exposure at 45 °C. In vitro cytotoxicity test shows that curcumin-loaded PEGylated magnetic liposomes could efficiently kill MCF-7 cells in parallel with increasing curcumin concentration. Fluorescence microscopy observed that these drug carriers could internalize efficiently into the cellular compartment of MCF-7 cells. Thus, it would be anticipated that the novel hydrophobic drug-loaded PEGylated magnetic liposomes in combination with inductive magnetic heating are promising to apply in the combination of chemotherapy and thermotherapy for cancer therapy.

  13. Development of ocular drug delivery systems using molecularly imprinted soft contact lenses.

    Science.gov (United States)

    Tashakori-Sabzevar, Faezeh; Mohajeri, Seyed Ahmad

    2015-05-01

    Recently, significant advances have been made in order to optimize drug delivery to ocular tissues. The main problems in ocular drug delivery are poor bioavailability and uncontrollable drug delivery of conventional ophthalmic preparations (e.g. eye drops). Hydrogels have been investigated since 1965 as new ocular drug delivery systems. Increase of hydrogel loading capacity, optimization of drug residence time on the ocular surface and biocompatibility with the eye tissue has been the main focus of previous studies. Molecular imprinting technology provided the opportunity to fulfill the above-mentioned objectives. Molecularly imprinted soft contact lenses (SCLs) have high potentials as novel drug delivery systems for the treatment of eye disorders. This technique is used for the preparation of polymers with specific binding sites for a template molecule. Previous studies indicated that molecular imprinting technology could be successfully applied for the preparation of SCLs as ocular drug delivery systems. Previous research, particularly in vivo studies, demonstrated that molecular imprinting is a versatile and effective method in optimizing the drug release behavior and enhancing the loading capacity of SCLs as new ocular drug delivery systems. This review highlights various potentials of molecularly imprinted contact lenses in enhancing the drug-loading capacity and controlling the drug release, compared to other ocular drug delivery systems. We have also studied the effects of contributing factors such as the type of comonomer, template/functional monomer molar ratio, crosslinker concentration in drug-loading capacity, and the release properties of molecularly imprinted hydrogels.

  14. Materials and methods for delivery of biological drugs

    Science.gov (United States)

    Zelikin, Alexander N.; Ehrhardt, Carsten; Healy, Anne Marie

    2016-11-01

    Biological drugs generated via recombinant techniques are uniquely positioned due to their high potency and high selectivity of action. The major drawback of this class of therapeutics, however, is their poor stability upon oral administration and during subsequent circulation. As a result, biological drugs have very low bioavailability and short therapeutic half-lives. Fortunately, tools of chemistry and biotechnology have been developed into an elaborate arsenal, which can be applied to improve the pharmacokinetics of biological drugs. Depot-type release systems are available to achieve sustained release of drugs over time. Conjugation to synthetic or biological polymers affords long circulating formulations. Administration of biological drugs through non-parenteral routes shows excellent performance and the first products have reached the market. This Review presents the main accomplishments in this field and illustrates the materials and methods behind existing and upcoming successful formulations and delivery strategies for biological drugs.

  15. Continuous Drug Release by Sea Anemone Nematostella vectensis Stinging Microcapsules

    Directory of Open Access Journals (Sweden)

    Yossi Tal

    2014-01-01

    Full Text Available Transdermal delivery is an attractive option for drug delivery. Nevertheless, the skin is a tough barrier and only a limited number of drugs can be delivered through it. The most difficult to deliver are hydrophilic drugs. The stinging mechanism of the cnidarians is a sophisticated injection system consisting of microcapsular nematocysts, which utilize built-in high osmotic pressures to inject a submicron tubule that penetrates and delivers their contents to the prey. Here we show, for the first time, that the nematocysts of the starlet sea anemone Nematostella vectensis can be isolated and incorporated into a topical formulation for continuous drug delivery. We demonstrate quantitative delivery of nicotinamide and lidocaine hydrochloride as a function of microcapsular dose or drug exposure. We also show how the released submicron tubules can be exploited as a skin penetration enhancer prior to and independently of drug application. The microcapsules are non-irritant and may offer an attractive alternative for hydrophilic transdermal drug delivery.

  16. 膜缓控释给药系统促进损伤组织的修复**★%A membrane controlled release drug delivery system promotes injured tissue repair

    Institute of Scientific and Technical Information of China (English)

    李伟; 戴江华; 罗军; 戴闽; 高乾坤

    2013-01-01

      背景:目前研究多注重缓控释给药膜的缓控释效果及其生物相容性,也有开展缓控释给药膜参与损伤组织修复的机制研究,其中干细胞是损伤组织修复的关键因素,但干细胞与缓控释给药膜之间的联系尚未得到足够关注。目的:分析膜缓控释给药系统在组织损伤修复中的研究现状与进展。方法:以“缓释系统,膜,药物载体,组织损伤修复,干细胞归巢;sustained-release system,membrane, drug delivery,injuries and repairs of tissue,stem cel homing”为关键词,采用计算机检索Pubmed数据库、中国知网、Elsevier数据库1992年1月至2012年12月有关膜缓控释给药系统临床应用及实验研究的文章。结果与结论:在膜缓控释给药系统中高分子材料几乎成了药物和生长因子在传递、渗透过程中不可分割的组成部分。虽然药物缓释系统的发展与制膜技术都在不断的更新,但距离完全达到理想的应用标准还有一定的差距,如不具备主动吸引干细胞定向迁移与分布的生物学功能。近年来膜缓控释给药系统出现新的发展方向,即不仅能起到诱导干细胞定向分化的作用,也能诱导干细胞向损伤部位定向分布,从而促进损伤组织再生修复。%  BACKGROUND: At present many studies have pay attention to the sustained-release and control ed-release effects, as wel as biocompatibility, in membrane control ed release drug delivery system. There are also some studies addressing the mechanisms underlying injured tissue repair with these drug membranes, in which stem cel s are the key factors. However, the association between stem cel s and the sustained and control ed drug release membrane has not yet been paid enough attention. OBJECTIVE: To analyze the current research status and progress of membrane sustained-release system in the repair of tissue injuries. METHODS: Using the keywords of “sustained-release

  17. Tailored beads made of dissolved cellulose - Investigation of their drug release properties

    DEFF Research Database (Denmark)

    Yildir, Emrah; Kolakovic, Ruzica; Genina, Natalja;

    2013-01-01

    In the frame of this work, we have investigated drug entrapping and release abilities of new type of porous cellulose beads (CBs) as a spherical matrix system for drug delivery. For that purpose, CBs prepared with three different methods were used as drug carriers and three compounds, anhydrous...... efficacy. Also, the drug release rates were controlled by solubility of model drugs (diffusion controlled release). In conclusion, CBs from dissolved cellulose show promise in achieving controlled drug delivery. © 2013 Elsevier B.V. All rights reserved....

  18. Image Guided Biodistribution of Drugs and Drug Delivery

    OpenAIRE

    Ding, Hong; Wu, Fang

    2012-01-01

    Image guided technique is playing an increasingly important role in the investigation of the biodistribution and pharmacokinetics of drugs or drug delivery systems. The application of these new materials and techniques with combined properties of diagnosis and therapy can benefit the development of targeted drug delivery system and modern personalized medicine This special issue provides an up-to-date collection of original research articles and review on the development of novel targeted dru...

  19. Design and Evaluation of Chronomodulated Drug Delivery of Tramadol Hydrochloride.

    Science.gov (United States)

    Alekya, Thota; Narendar, Dudhipala; Mahipal, Donthi; Arjun, Narala; Nagaraj, Banala

    2017-09-26

    Rheumatoid arthritis is an auto immune disease which requires chronotherapy as it occurs during early morning. Tramadol hydrochloride (TH) is an analgesic drug, used to treat rheumatoid arthritis. The aim of the present investigation was to develop chronomodulated drug delivery system of tramadol hydrochloride such that it releases the drug early in the morning, during which the symptoms of rheumatoid arthritis worsen. To develop chronomodulated drug delivery system of TH, initially core tablets of TH were prepared using three different supradisintegrants followed by coating with pH dependent polymer of Eudragit S100. The prepared core tablets are evaluated for physical parameters and an optimal system was identified. Further, coating composition of Eudragit S100 was optimized and coating tablets of TH was prepared. The prepared coated tablets were evaluated for weight variation, hardness, drug content and in vitro release studies in 0.1N HCl, pH 6.8 phosphate buffer and pH 7.4 phosphate buffer. Formulation with 7.5% of coating solution (ES2) had shown a significant drug release after a lag time of 3 h (in pH 6.8 medium), 6 h (in pH 6.8 medium) and 8 h (in pH 7.4 medium), respectively. DSC studies revealed that no interaction between core and coated materials with drug was observed. Thus, chronomodulated drug delivery system of TH was formulated and assuming that if a tablet is administered around 9 pm to 10 pm, the drug release starts after a lag time of 6 h i. e., around 3am to 4 am. © Georg Thieme Verlag KG Stuttgart · New York.

  20. [A novel anticancer drug delivery system -DAC-70/CDDP].

    Science.gov (United States)

    Sugitachi, Akio; Otsuka, Koki; Fujisawa, Kentaro; Itabashi, Tetsuya; Akiyama, Yuji; Sasaki, Akira; Ikeda, Kenichiro; Yoshida, Yasuo; Takamori, Yoshimori; Kurozumi, Seiji; Mori, Takatoshi; Wakabayashi, Go

    2007-11-01

    We devised a muco-adhesive anticancer drug delivery system using 70% deacetylated chitin (DAC-70) and cisplatin (CDDP) and 5-fluorouracil (5-FU). The adhesive force between the system and human colonic mucosa was measured ex vivo, and a release profile of each drug was examined in vitro. Each system demonstrated a stronger muco-adhesive force at 37 degrees C than that of 25 degrees C. The CDDP-loaded system showed a sustained release of the drug while the 5-FU-loaded system exhibited an initial bursting of the agent. We presume that the release profile of CDDP and 5-FU is closely related to both degradability of the chitin and interactions between the chitin and each drug. The DAC-70/CDDP system would be clinically promising in loco-regional cancer chemotherapy.

  1. 19 CFR 12.114 - Release or refusal of delivery.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Release or refusal of delivery. 12.114 Section 12.114 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF... delivery. If the completed Notice of Arrival directs the port director to release the shipment...

  2. Drug Delivery for Peripheral Nerve Regeneration

    Science.gov (United States)

    2015-11-01

    and diffusion hole follow sterilization . The manufactured PLGA devices were sterilized using 70% ethanol (n=42), ethylene oxide (ETO) (n=46), and a...hydrogels. The shortcomings of current devices in terms of burst effect , nonuniform dosage, and uneven drug delivery, necessitates a new approach to...Specific Aim 2 -- To evaluate the effectiveness of the conduit-drug delivery device to enhance nerve regeneration across a 15mm nerve gap in a rat sciatic

  3. Drug delivery with topically applied nanoparticles: science fiction or reality.

    Science.gov (United States)

    Lademann, J; Richter, H; Meinke, M C; Lange-Asschenfeldt, B; Antoniou, C; Mak, W C; Renneberg, R; Sterry, W; Patzelt, A

    2013-01-01

    The efficacy of topically applied drugs is determined by their action mechanism and their potential capacity of passing the skin barrier. Nanoparticles are assumed to be efficient carrier systems for drug delivery through the skin barrier. For flexible nanoparticles like liposomes, this effect has been well demonstrated. The penetration properties of solid nanoparticles are currently under intensive investigation. The crucial advantage of nanoparticles over non-particulate substances is their capability to penetrate deeply into the hair follicles where they can be stored for several days. There is no evidence, yet, that solid particles ≥40 nm are capable of passing through the healthy skin barrier. Therefore and in spite of the long-standing research efforts in this field, commercially available solid nanoparticle-based products for drug delivery through the healthy skin are still missing. Nevertheless, the prospects for the clinical use of nanoparticles in drug delivery are tremendous. They can be designed as transport systems delivering drugs efficiently into the hair follicles in the vicinity of specific target structures. Once deposited at these structures, specific signals might trigger the release of the drugs and exert their effects on the target cells. In this article, examples of such triggered drug release are presented.

  4. Drug loading, dispersion stability, and therapeutic efficacy in targeted drug delivery with carbon nanotubes

    OpenAIRE

    Heister, E; Neves, V.; Lamprecht, C.; Silva, SRP; Coley, HM; Mcfadden, J.

    2012-01-01

    We have designed a drug delivery system for the anti-cancer drugs doxorubicin and mitoxantrone based on carbon nanotubes, which is stable under biological conditions, allows for sustained release, and promotes selectivity through an active targeting scheme. Carbon nanotubes are particularly promising for this area of application due to their high surface area, allowing for high drug loading, and their unique interaction with cellular membranes. We have taken a systematic approach to PEG conju...

  5. Nasal Delivery of High Molecular Weight Drugs

    OpenAIRE

    Erdal Cevher; Yıldız Ozsoy; Sevgi Gungor

    2009-01-01

    Nasal drug delivery may be used for either local or systemic effects. Low molecular weight drugs with are rapidly absorbed through nasal mucosa. The main reasons for this are the high permeability, fairly wide absorption area, porous and thin endothelial basement membrane of the nasal epithelium. Despite the many advantages of the nasal route, limitations such as the high molecular weight (HMW) of drugs may impede drug absorption through the nasal mucosa. Recent studies have focused particula...

  6. Orally disintegrating films: A modern expansion in drug delivery system

    Directory of Open Access Journals (Sweden)

    Muhammad Irfan

    2016-09-01

    Full Text Available Over the past few decades, tendency toward innovative drug delivery systems has majorly increased attempts to ensure efficacy, safety and patient acceptability. As discovery and development of new chemical agents is a complex, expensive and time consuming process, so recent trends are shifting toward designing and developing innovative drug delivery systems for existing drugs. Out of those, drug delivery system being very eminent among pediatrics and geriatrics is orally disintegrating films (ODFs. These fast disintegrating films have superiority over fast disintegrating tablets as the latter are associated with the risks of choking and friability. This drug delivery system has numerous advantages over conventional fast disintegrating tablets as they can be used for dysphasic and schizophrenic patients and are taken without water due to their ability to disintegrate within a few seconds releasing medication in mouth. Various approaches are employed for formulating ODFs and among which solvent casting and spraying methods are frequently used. Generally, hydrophilic polymers along with other excipients are used for preparing ODFs which allow films to disintegrate quickly releasing incorporated active pharmaceutical ingredient (API within seconds. Orally disintegrating films have potential for business and market exploitation because of their myriad of benefits over orally disintegrating tablets. This present review attempts to focus on benefits, composition, approaches for formulation and evaluation of ODFs. Additionally, the market prospect of this innovative dosage form is also targeted.

  7. Mucus-penetrating nanoparticles for vaginal and gastrointestinal drug delivery

    Science.gov (United States)

    Ensign-Hodges, Laura

    A method that could provide more uniform and longer-lasting drug delivery to mucosal surfaces holds the potential to greatly improve the effectiveness of prophylactic and therapeutic approaches for numerous diseases and conditions, including sexually transmitted infections and inflammatory bowel disease. However, the body's natural defenses, including adhesive, rapidly cleared mucus linings coating nearly all entry points to the body not covered by skin, has limited the effectiveness of drug and gene delivery by nanoscale delivery systems. Here, we investigate the use of muco-inert mucus-penetrating nanoparticles (MPP) for improving vaginal and gastrointestinal drug delivery. Conventional hydrophobic nanoparticles strongly adhere to mucus, facilitating rapid clearance from the body. Here, we demonstrate that mucoadhesive polystyrene nanoparticles (conventional nanoparticles, CP) become mucus-penetrating in human cervicovaginal mucus (CVM) after pretreatment with sufficient concentrations of Pluronic F127. Importantly, the diffusion rate of large MPP did not change in F127 pretreated CVM, implying there is no affect on the native pore structure of CVM. Additionally, there was no increase in inflammatory cytokine release in the vaginal tract of mice after daily application of 1% F127 for one week. Importantly, HSV virus remains adherent in F127-pretreated CVM. Mucosal epithelia use osmotic gradients for fluid absorption and secretion. We hypothesized that hypotonically-induced fluid uptake could be advantageous for rapidly delivering drugs through mucus to the vaginal epithelium. We evaluated hypotonic formulations for delivering water-soluble drugs and for drug delivery with MPP. Hypotonic formulations markedly increased the rate at which drugs and MPP reached the epithelial surface. Additionally, hypotonic formulations greatly enhanced drug and MPP delivery to the entire epithelial surface, including deep into the vaginal folds (rugae) that isotonic formulations

  8. Infuence of Microstructure in Drug Release Behavior of Silica Nanocapsules

    Science.gov (United States)

    Zoltan, Tamara

    2013-01-01

    Meso- and nanoporous structures are adequate matrices for controlled drug delivery systems, due to their large surface areas and to their bioactive and biocompatibility properties. Mesoporous materials of type SBA-15, synthesized under different pH conditions, and zeolite beta were studied in order to compare the different intrinsic morphological characteristics as pore size, pore connectivity, and pore geometry on the drug loading and release process. These materials were characterized by X-ray diffraction, nitrogen adsorption, scanning and transmission electron microscopy, and calorimetric measurements. Ibuprofen (IBU) was chosen as a model drug for the formulation of controlled-release dosage forms; it was impregnated into these two types of materials by a soaking procedure during different periods. Drug loading and release studies were followed by UV-Vis spectrophotometry. All nano- and mesostructured materials showed a similar loading behavior. It was found that the pore size and Al content strongly influenced the release process. These results suggest that the framework structure and architecture affect the drug adsorption and release properties of these materials. Both materials offer a good potential for a controlled delivery system of ibuprofen. PMID:23986870

  9. Infuence of Microstructure in Drug Release Behavior of Silica Nanocapsules

    Directory of Open Access Journals (Sweden)

    Gema Gonzalez

    2013-01-01

    Full Text Available Meso- and nanoporous structures are adequate matrices for controlled drug delivery systems, due to their large surface areas and to their bioactive and biocompatibility properties. Mesoporous materials of type SBA-15, synthesized under different pH conditions, and zeolite beta were studied in order to compare the different intrinsic morphological characteristics as pore size, pore connectivity, and pore geometry on the drug loading and release process. These materials were characterized by X-ray diffraction, nitrogen adsorption, scanning and transmission electron microscopy, and calorimetric measurements. Ibuprofen (IBU was chosen as a model drug for the formulation of controlled-release dosage forms; it was impregnated into these two types of materials by a soaking procedure during different periods. Drug loading and release studies were followed by UV-Vis spectrophotometry. All nano- and mesostructured materials showed a similar loading behavior. It was found that the pore size and Al content strongly influenced the release process. These results suggest that the framework structure and architecture affect the drug adsorption and release properties of these materials. Both materials offer a good potential for a controlled delivery system of ibuprofen.

  10. A Novel Multilayered Multidisk Oral Tablet for Chronotherapeutic Drug Delivery

    Directory of Open Access Journals (Sweden)

    Zaheeda Khan

    2013-01-01

    Full Text Available A Multilayered Multidisk Tablet (MLMDT comprising two drug-loaded disks enveloped by three drug-free barrier layers was developed for use in chronotherapeutic disorders, employing two model drugs, theophylline and diltiazem HCl. The MLMDT was designed to achieve two pulses of drug release separated by a lag phase. The polymer disk comprised hydroxyethylcellulose (HEC and ethylcellulose (EC granulated using an aqueous dispersion of EC. The polymeric barrier layers constituted a combination of pectin/Avicel (PBL (1st barrier layer and hydroxypropylmethylcellulose (HPMC (HBL1 and HBL2 as the 2nd and 3rd barrier layers, respectively. Sodium bicarbonate was incorporated into the diltiazem-containing formulation for delayed drug release. Erosion and swelling studies confirmed the manner in which the drug was released with theophylline formulations exhibiting a maximum swelling of 97% and diltiazem containing formulations with a maximum swelling of 119%. FTIR spectra displayed no interactions between drugs and polymers. Molecular mechanics simulations were undertaken to predict the possible orientation of the polymer morphologies most likely affecting the MLMDT performance. The MLMDT provided two pulses of drug release, separated by a lag phase, and additionally it displayed desirable friability, hardness, and uniformity of mass indicating a stable formulation that may be a desirable candidate for chronotherapeutic drug delivery.

  11. Polymeric nanoparticles containing diazepam: preparation, optimization, characterization, in-vitro drug release and release kinetic study

    Science.gov (United States)

    Bohrey, Sarvesh; Chourasiya, Vibha; Pandey, Archna

    2016-03-01

    Nanoparticles formulated from biodegradable polymers like poly(lactic-co-glycolic acid) (PLGA) are being extensively investigated as drug delivery systems due to their two important properties such as biocompatibility and controlled drug release characteristics. The aim of this work to formulated diazepam loaded PLGA nanoparticles by using emulsion solvent evaporation technique. Polyvinyl alcohol (PVA) is used as stabilizing agent. Diazepam is a benzodiazepine derivative drug, and widely used as an anticonvulsant in the treatment of various types of epilepsy, insomnia and anxiety. This work investigates the effects of some preparation variables on the size and shape of nanoparticles prepared by emulsion solvent evaporation method. These nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM). Zeta potential study was also performed to understand the surface charge of nanoparticles. The drug release from drug loaded nanoparticles was studied by dialysis bag method and the in vitro drug release data was also studied by various kinetic models. The results show that sonication time, polymer content, surfactant concentration, ratio of organic to aqueous phase volume, and the amount of drug have an important effect on the size of nanoparticles. Hopefully we produced spherical shape Diazepam loaded PLGA nanoparticles with a size range under 250 nm with zeta potential -23.3 mV. The in vitro drug release analysis shows sustained release of drug from nanoparticles and follow Korsmeyer-Peppas model.

  12. Microemulsion: As Excellent Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Pathan Maksud

    2012-09-01

    Full Text Available Today though the oral drug delivery system is dominant still it is found to be need of ideal transdermal drug delivery system. “A micro emulsion is a system of water, oil and an amphiphile which is a single optically isotropic and thermodynamically stable liquid solution”. Microemulsions offer several advantages as drug delivery systems as these are thermodynamically stable and stability allows for self emulsification of the system with microemulsion acting as supersolvent of the drugs which are poorly or insoluble in water. They are preferred more as compared to conventional emulsions due stability. The dispersed phase mainly acts as the solvent for the water insoluble drug. Microemulsions have been proved to increase the cutaneous absorption of both lipophilic and hydrophilic API’s when compared to conventional vehicles.

  13. Strategies to improve intracellular drug delivery by targeted liposomes

    NARCIS (Netherlands)

    Fretz, M.M.

    2007-01-01

    Biotechnological advances increased the number of novel macromolecular drugs and new drug targets. The latter are mostly found intracellular. Unfortunately, most of the new macromolecular drugs rely on drug delivery tools for their intracellular delivery because their unfavourable physicochemical pr

  14. A Two-Layer Mathematical Modelling of Drug Delivery to Biological Tissues

    CERN Document Server

    Chakravarty, Koyel

    2016-01-01

    Local drug delivery has received much recognition in recent years, yet it is still unpredictable how drug efficacy depends on physicochemical properties and delivery kinetics. The purpose of the current study is to provide a useful mathematical model for drug release from a drug delivery device and consecutive drug transport in biological tissue, thereby aiding the development of new therapeutic drug by a systemic approach. In order to study the complete process, a two-layer spatio-temporal model depicting drug transport between the coupled media is presented. Drug release is described by considering solubilisation dynamics of drug particle, diffusion of the solubilised drug through porous matrix and also some other processes like reversible dissociation / recrystallization, drug particle-receptor binding and internalization phenomena. The model has led to a system of partial differential equations describing the important properties of drug kinetics. This model contributes towards the perception of the roles...

  15. Recent trends in protein and peptide drug delivery systems

    Directory of Open Access Journals (Sweden)

    Gupta Himanshu

    2009-01-01

    Full Text Available With the discovery of insulin in 1922, identification and commercialization of potential protein and peptide drugs have been increased. Since then, research and development to improve the means of delivering protein therapeutics to patients has begun. The research efforts have followed two basic pathways: One path focused on noninvasive means of delivering proteins to the body and the second path has been primarily aimed at increasing the biological half-life of the therapeutic molecules. The search for approaches that provide formulations that are stable, bioavailable, readily manufacturable, and acceptable to the patient, has led to major advances in the development of nasal and controlled release technology, applicable to every protein or peptide. In several limited cases, sustained delivery of peptides and proteins has employed the use of polymeric carriers. More successes have been achieved by chemical modification using amino acid substitutions, protein pegylation or glycosylation to improve the pharmacodynamic properties of certain macromolecules and various delivery systems have been developed like the prolease technology, nano-particulate and microparticulate delivery systems, and the mucoadhesive delivery of peptides. The needle and syringe remain the primary means of protein delivery. Major hurdles remain in order to overcome the combined natural barriers of drug permeability, drug stability, pharmacokinetics, and pharmacodynamics of protein therapeutics. In our present review we have tried to compile some recent advances in protein and peptide drug delivery systems.

  16. Tunable drug delivery using chemoselective functionalization of hydrogels.

    Science.gov (United States)

    Mauri, Emanuele; Rossi, Filippo; Sacchetti, Alessandro

    2016-04-01

    In the last decades interests on cleavable linkers are growing due to the need to develop controlled drug delivery systems in biochemical and therapeutic applications. The synthesis of hydrogels as devices capable to maintain the drug level within a desired range for a long and sustained period of time is a leading strategy for this aim. However with respect to the good results obtained with antibodies and peptides there are a lot of problems related to the quick and uncontrolled diffusion of small molecules through hydrogel pores. In this work, we propose the functionalization of polyethylene glycol (PEG) chains with two different pH-sensitive linkers, ester and hydrazone, and their application as building blocks of microwave-assisted hydrogels for controlled delivery of small hydrophilic drugs. As drug mimetic we used Rhodamine B, a harmless fluorophore with steric hindrance and reactive groups similar to many small hydrophilic drugs. At physiological and low basic conditions, the cleavability of ester and hydrazone spacer evidenced the possibility to delay the release of drugs from the scaffold compared to hydrogels where drug was entrapped within the network only due to its steric hindrance. The obtained release profiles were compared, underlining the opportunity to tune the release rate using the synthesized hydrogels.

  17. Towards soft robotic devices for site-specific drug delivery.

    Science.gov (United States)

    Alici, Gursel

    2015-01-01

    Considerable research efforts have recently been dedicated to the establishment of various drug delivery systems (DDS) that are mechanical/physical, chemical and biological/molecular DDS. In this paper, we report on the recent advances in site-specific drug delivery (site-specific, controlled, targeted or smart drug delivery are terms used interchangeably in the literature, to mean to transport a drug or a therapeutic agent to a desired location within the body and release it as desired with negligibly small toxicity and side effect compared to classical drug administration means such as peroral, parenteral, transmucosal, topical and inhalation) based on mechanical/physical systems consisting of implantable and robotic drug delivery systems. While we specifically focus on the robotic or autonomous DDS, which can be reprogrammable and provide multiple doses of a drug at a required time and rate, we briefly cover the implanted DDS, which are well-developed relative to the robotic DDS, to highlight the design and performance requirements, and investigate issues associated with the robotic DDS. Critical research issues associated with both DDSs are presented to describe the research challenges ahead of us in order to establish soft robotic devices for clinical and biomedical applications.

  18. Microfluidic device for drug delivery

    Science.gov (United States)

    Beebe, David J. (Inventor); MacDonald, Michael J. (Inventor); Eddington, David T. (Inventor); Mensing, Glennys A. (Inventor)

    2010-01-01

    A microfluidic device is provided for delivering a drug to an individual. The microfluidic device includes a body that defines a reservoir for receiving the drug therein. A valve interconnects the reservoir to an output needle that is insertable into the skin of an individual. A pressure source urges the drug from the reservoir toward the needle. The valve is movable between a closed position preventing the flow of the drug from the reservoir to the output needle and an open position allowing for the flow of the drug from the reservoir to the output needle in response to a predetermined condition in the physiological fluids of the individual.

  19. Needle-free insulin drug delivery

    Directory of Open Access Journals (Sweden)

    Patni Preeti

    2006-01-01

    Full Text Available For most patients with type 1 diabetes, the worst part of the disease is to tolerate needle after needle, both for glucose measurement and to deliver insulin. In the last two decades, concept of insulin therapy by multiple-dose injection has undergone a miraculous change. Needle-free insulin delivery appeared to be a wonderful approach, and its allure rested in being comfortable and safe. In today′s era, insulin delivery by alternative route is a topic of current interest in the design of drug delivery system. Major global pharmaceutical companies are showing encouraging progress in their attempts to develop alternative insulin delivery technologies. Many such drug delivery systems have been developed for oral, buccal and nasal route. This review article discusses, in brief, the novel and emerging technologies that are in pipeline, including insulin inhalers, insulin spray, insulin pill, insulin analogues, insulin complement, islet cell transplant, implantable insulin pumps and guardian continuous glucose monitoring system.

  20. Novel non-invasive protein and peptide drug delivery approaches.

    Science.gov (United States)

    Wallis, L; Kleynhans, E; Toit, T Du; Gouws, C; Steyn, D; Steenekamp, J; Viljoen, J; Hamman, J

    2014-01-01

    Protein and peptide based therapeutics are typically administered by injection due to their poor uptake when administered via enteral routes of drug administration. Unfortunately, chronic administration of these drugs through multiple injections presents certain patient related problems and it is difficult to mimic the normal physiological release patterns via this mode of drug administration. A need therefore exists to non-invasively deliver these drugs by means of alternative ways such as via the oral, pulmonary, nasal, transdermal and buccal administration routes. Although some attempts of needle free peptide and protein drug delivery have progressed to the clinical stage, relatively limited success has been achieved in terms of commercially available products. Despite the low frequency of clinical breakthroughs with noninvasive protein drug delivery this far, it remains an active research area with renewed interest not only due to its improved therapeutic potential, but also due to the attractive commercial outcomes it offers. It is the aim of this review article to reflect on the main strategies investigated to overcome the barriers against effective systemic protein drug delivery in different routes of drug administration. Approaches based on chemical modifications and pharmaceutical technologies are discussed with reference to examples of drugs and devices that have shown potential, while attempts that have failed are also briefly outlined.

  1. Bioinspired silica as drug delivery systems and their biocompatibility

    DEFF Research Database (Denmark)

    Steven, Christopher R.; Busby, Grahame A.; Mather, Craig

    2014-01-01

    Silica nanoparticles have been shown to have great potential as drug delivery systems (DDS), however, their fabrication often involves harsh chemicals and energy intensive laborious methods. This work details the employment of a bioinspired "green" method for the controlled synthesis of silica, use...... allowing a one step and one pot method for simultaneous silica synthesis and drug loading. We established that the drug release profile can be modulated by synthetic parameters, which can allow design of tailored DDS. A systematic investigation using a two level factorial design was adopted in order...... of the products to entrap and release drug molecules and their cytotoxicity in order to develop novel DDS. Bioinspired silica synthesis occurs at pH 7, room temperature and in less than 5 minutes, resulting in a rapid, cheaper and greener route. Drugs were loaded into silica during the silica formation, thus...

  2. Liposomal drug delivery systems: from concept to clinical applications.

    Science.gov (United States)

    Allen, Theresa M; Cullis, Pieter R

    2013-01-01

    The first closed bilayer phospholipid systems, called liposomes, were described in 1965 and soon were proposed as drug delivery systems. The pioneering work of countless liposome researchers over almost 5 decades led to the development of important technical advances such as remote drug loading, extrusion for homogeneous size, long-circulating (PEGylated) liposomes, triggered release liposomes, liposomes containing nucleic acid polymers, ligand-targeted liposomes and liposomes containing combinations of drugs. These advances have led to numerous clinical trials in such diverse areas as the delivery of anti-cancer, anti-fungal and antibiotic drugs, the delivery of gene medicines, and the delivery of anesthetics and anti-inflammatory drugs. A number of liposomes (lipidic nanoparticles) are on the market, and many more are in the pipeline. Lipidic nanoparticles are the first nanomedicine delivery system to make the transition from concept to clinical application, and they are now an established technology platform with considerable clinical acceptance. We can look forward to many more clinical products in the future.

  3. TRANSFEROSOMES: A NOVEL APPROACH FOR TRANSDERMAL DRUG DELIVERY

    Directory of Open Access Journals (Sweden)

    Kumar Ravi

    2012-01-01

    Full Text Available Transdermal drug delivery system appears to be most promising delivery system due to their merits over conventional delivery systems. Recently, various strategies have been used to augment the transdermal delivery of bioactives. Mainly, they include iontophoresis, electrophoresis, sonophoresis, chemical permeation enhancers, microneedles, and vesicular system (liposomes, niosomes, elastic liposomes such as ethosomes and transfersomes. Among these strategies transferosomes appear promising. Transfersomes possess an infrastructure consisting of hydrophobic and hydrophilic moieties together and as a result can accommodate drug molecules with wide range of solubility. A novel vesicular drug carrier system called transfersomes, which is composed of phospholipid, surfactant, and water for enhanced transdermal delivery. Transfersomes can deform and pass through narrow constriction (from 5 to 10 times less than their own diameter without measurable loss.. The system can be characterized by in vitro for vesicle shape and size, entrapment efficiency, degree of deformability, number of vesicles per cubic mm. Flexibility of transferosomes membrane is achieved by mixing suitable surface active agents in the proper ratios. Transferosomes have beneficial advantages over other vesicular systems such as their high penetration power across skin, higher stability, systemic drug release possible and higher deformability than other vesicular systems such as niosomes, liposomes etc. They can act as a carrier for low as well as high molecular weight drugs e.g. analgesic, anesthetic, corticosteroids, sex hormone, anticancer, insulin, gap junction protein, and albumin.

  4. Nanoparticles and nanostructured carriers for drug delivery and contrast enhancement

    Science.gov (United States)

    Godage, Olga S.; Bucharskaya, Alla B.; Navolokin, Nikita A.; German, Sergey V.; Zuev, Viktor V.; Terentyuk, Georgy S.; Maslyakova, Galina N.; Gorin, Dmitry A.

    2016-04-01

    Currently, nanotechnologies are widely used in science and industry. It is known that the application of drug delivery nanostructured carriers for biomedicine is one of the promising areas of nanotechnology. Nanostructured carriers can be used in the diagnosis process for detecting a neoplastic tumor cells in peripheral blood, for contrast enhancement on magnetic resonance imaging (MRI), as well as for targeted drug delivery to tumor tissues. Agents for the targeted delivery (nanoparticles, liposomes, microcapsules, and etc) can affect the healthy tissues and organs, cause side effects and have a toxic effect. Therefore, it necessary to study the morphological changes that occur not only in the "target", such as a tumor, but also the internal organs, taking place under the influence of both the agents for targeted drug delivery and physical impact induced remote controlled drug release. Thus , the aim of our work is selection of the most promising agents for targeted drug delivery to tumor and contrast agents for in vivo visualization of tumor tissue boundaries , as well as their impact on the organs and tissues as results of nanostructured object biodistribution.

  5. Influence of microemulsions on cutaneous drug delivery

    DEFF Research Database (Denmark)

    Kreilgaard, Mads

    2002-01-01

    In attempt to increase cutaneous drug delivery, microemulsion vehicles have been more and more frequently employed over recent years. Microemulsion formulations have been shown to be superior for both transdermal and dermal delivery of particularly lipophilic compounds, but also hydrophilic...... compounds appear to benefit from application in microemulsions compared to conventional vehicles, like hydrogels, emulsions and liposomes. The favourable drug delivery properties of microemulsions appear to mainly be attributed to the excellent solubility properties. However, the vehicles may also act...... as penetration enhancers depending on the oil/surfactant constituents, which involves a risk of inducing local irritancy. The correlation between microemulsion structure/composition and drug delivery potential is not yet fully elucidated. However, a few studies have indicated that the internal structure...

  6. Novel biodegradable nanocarriers for enhanced drug delivery.

    Science.gov (United States)

    Gagliardi, Mariacristina

    2016-12-01

    With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.

  7. Impact of chitosan composites and chitosan nanoparticle composites on various drug delivery systems: A review

    Directory of Open Access Journals (Sweden)

    M.Abd Elgadir

    2015-12-01

    Full Text Available Chitosan is a promising biopolymer for drug delivery systems. Because of its beneficial properties, chitosan is widely used in biomedical and pharmaceutical fields. In this review, we summarize the physicochemical and drug delivery properties of chitosan, selected studies on utilization of chitosan and chitosan-based nanoparticle composites in various drug delivery systems, and selected studies on the application of chitosan films in both drug delivery and wound healing. Chitosan is considered the most important polysaccharide for various drug delivery purposes because of its cationic character and primary amino groups, which are responsible for its many properties such as mucoadhesion, controlled drug release, transfection, in situ gelation, and efflux pump inhibitory properties and permeation enhancement. This review can enhance our understanding of drug delivery systems particularly in cases where chitosan drug-loaded nanoparticles are applied.

  8. New developments and opportunities in oral mucosal drug delivery for local and systemic disease.

    Science.gov (United States)

    Hearnden, Vanessa; Sankar, Vidya; Hull, Katrusha; Juras, Danica Vidović; Greenberg, Martin; Kerr, A Ross; Lockhart, Peter B; Patton, Lauren L; Porter, Stephen; Thornhill, Martin H

    2012-01-01

    The oral mucosa's accessibility, excellent blood supply, by-pass of hepatic first-pass metabolism, rapid repair and permeability profile make it an attractive site for local and systemic drug delivery. Technological advances in mucoadhesives, sustained drug release, permeability enhancers and drug delivery vectors are increasing the efficient delivery of drugs to treat oral and systemic diseases. When treating oral diseases, these advances result in enhanced therapeutic efficacy, reduced drug wastage and the prospect of using biological agents such as genes, peptides and antibodies. These technologies are also increasing the repertoire of drugs that can be delivered across the oral mucosa to treat systemic diseases. Trans-mucosal delivery is now a favoured route for non-parenteral administration of emergency drugs and agents where a rapid onset of action is required. Furthermore, advances in drug delivery technology are bringing forward the likelihood of transmucosal systemic delivery of biological agents.

  9. Use of porous aluminosilicate pellets for drug delivery.

    Science.gov (United States)

    Byrne, R S; Deasy, P B

    2005-06-01

    Three pelletized porous aluminosilicate ceramics were obtained commercially and their potential to act as extended release drug delivery systems was assessed. The pellets were drug loaded using a vacuum impregnation technique. Factors such as the concentration of the loading solution and the porosity and bulk density of the ceramic influenced the drug loading. The release of drug from the pellets was extended as the drug was entrapped within their porous interior. The rate of release was influenced by the porous microstructure of the pellets and the physicochemical properties of the drug. Extrusion-spheronization was used to prepare pellets similar to the porous ceramics. The pellet formulations contained an aluminosilicate clay mineral (kaolin or halloysite), ethylcellulose 100 cps, ethanol and varying quantities of sucrose. The latter two components acted as pore forming agents. Diltiazem HCl was loaded into the pellets and its release was extended. The release rate could be modified by changing the quantity of sucrose included in the initial formulation, as this influenced the porous microstructure of the pellets. In halloysite-based products the release was further extended due to entrapment of the drug within the halloysite microtubules. Porous kaolin-based pellets were also prepared by cryopelletization. This involved freezing droplets of an aqueous suspension containing kaolin, sodium silicate solution and sodium lauryl sulphate. The resulting pellets were freeze-dried, which removed ice from them to leave pores behind. The pellets gave extended drug release with the release rate being influenced by the porous microstructure of the pellets and their microclimate pH.

  10. A novel liquid effervescent floating delivery system for sustained drug delivery.

    Science.gov (United States)

    Ibrahim, H K

    2009-08-01

    An effervescent floating liquid formulation with in situ gelling properties has been assessed for its potential for sustaining drug delivery and targeting. The formulation consisted of sodium alginate and glyceryl monooleate (GMO). The developed formulation met all pre-requisites to become an in situ gelling floating system and it gelled and floated instantaneously in the pH conditions of the stomach. Moreover, the gels formed in situ remained intact for more than 48 h to facilitate sustained release of drugs. Increasing the mannuronic acid ratio of sodium alginate and the GMO concentration significantly retarded the release rate and extent. The in vitro release of both hydrophilic and hydrophobic drugs from the prepared formulations followed root-time kinetics during the sustained release period. Replacing the free drug with drug encapsulated microspheres enabled tailoring of the release profile and achieved zero-order release kinetics. The system retained its appearance and rheological properties for 12 months at ambient conditions. The values of the similarity factor Sd proved the absence of any significant difference in the release profile upon storage.

  11. A remotely operated drug delivery system with dose control

    KAUST Repository

    Yi, Ying

    2017-05-08

    “On demand” implantable drug delivery systems can provide optimized treatments, due to their ability to provide targeted, flexible and precise dose release. However, two important issues that need to be carefully considered in a mature device include an effective actuation stimulus and a controllable dose release mechanism. This work focuses on remotely powering an implantable drug delivery system and providing a high degree of control over the released dose. This is accomplished by integration of a resonance-based wireless power transfer system, a constant voltage control circuit and an electrolytic pump. Upon the activation of the wireless power transfer system, the electrolytic actuator is remotely powered by a constant voltage regardless of movements of the device within an effective range of translation and rotation. This in turn contributes to a predictable dose release rate and greater flexibility in the positioning of external powering source. We have conducted proof-of-concept drug delivery studies using the liquid drug in reservoir approach and the solid drug in reservoir approach, respectively. Our experimental results demonstrate that the range of flow rate is mainly determined by the voltage controlled with a Zener diode and the resistance of the implantable device. The latter can be adjusted by connecting different resistors, providing control over the flow rate to meet different clinical needs. The flow rate can be maintained at a constant level within the effective movement range. When using a solid drug substitute with a low solubility, solvent blue 38, the dose release can be kept at 2.36μg/cycle within the effective movement range by using an input voltage of 10Vpp and a load of 1.5 kΩ, which indicates the feasibility and controllability of our system without any complicated closed-loop sensor.

  12. Importance of novel drug delivery systems in herbal medicines

    OpenAIRE

    V Kusum Devi; Nimisha Jain; Valli, Kusum S.

    2010-01-01

    Novel drug delivery system is a novel approach to drug delivery that addresses the limitations of the traditional drug delivery systems. Our country has a vast knowledge base of Ayurveda whose potential is only being realized in the recent years. However, the drug delivery system used for administering the herbal medicine to the patient is traditional and out-of-date, resulting in reduced efficacy of the drug. If the novel drug delivery technology is applied in herbal medicine, it may help in...

  13. DESIGN OF GASTRO RETENTIVE DRUG DELIVERY SYSTEM OF DILTIAZEM HYDROCHLORIDE

    Directory of Open Access Journals (Sweden)

    L. K. Omray

    2014-02-01

    Full Text Available Gastro retentive drug delivery system of diltiazem hydrochloride was designed and evaluated for its effectiveness for the management of mild to moderate hypertension. Gastro retentive drug delivery system were prepared using polyvinyl alcohol and sodium carboxy methyl cellulose as the polymers and sodium bicarbonate as a gas generating agent for the reduction of floating lag time. Gastro retentive drug delivery system tablets were prepared by wet granulation method by compression in tablet compression machine. Formulations DL1, DL2, DL3, DL4 and DL5 were developed which differed in the ratio of polyvinyl alcohol and sodium carboxy methyl cellulose polymers. All the formulations were evaluated for hardness, weight variation, friability, drug content, swelling index, buoyancy studies and in vitro drug release study. In vitro drug release study was performed using United State Pharmacopoeia 23 type 2 dissolution test apparatus employing paddle stirrer at 50 r/pm. Dissolution medium was 900 ml of 0.1N hydrochloric acid at 37ºC ± 3ºC. Formulations DL3 was found to be better as compared to other formulation.

  14. Coaxial electrospun fibers: applications in drug delivery and tissue engineering.

    Science.gov (United States)

    Lu, Yang; Huang, Jiangnan; Yu, Guoqiang; Cardenas, Romel; Wei, Suying; Wujcik, Evan K; Guo, Zhanhu

    2016-09-01

    Coelectrospinning and emulsion electrospinning are two main methods for preparing core-sheath electrospun nanofibers in a cost-effective and efficient manner. Here, physical phenomena and the effects of solution and processing parameters on the coaxial fibers are introduced. Coaxial fibers with specific drugs encapsulated in the core can exhibit a sustained and controlled release. Their exhibited high surface area and three-dimensional nanofibrous network allows the electrospun fibers to resemble native extracellular matrices. These features of the nanofibers show that they have great potential in drug delivery and tissue engineering applications. Proteins, growth factors, antibiotics, and many other agents have been successfully encapsulated into coaxial fibers for drug delivery. A main advantage of the core-sheath design is that after the process of electrospinning and release, these drugs remain bioactive due to the protection of the sheath. Applications of coaxial fibers as scaffolds for tissue engineering include bone, cartilage, cardiac tissue, skin, blood vessels and nervous tissue, among others. A synopsis of novel coaxial electrospun fibers, discussing their applications in drug delivery and tissue engineering, is covered pertaining to proteins, growth factors, antibiotics, and other drugs and applications in the fields of bone, cartilage, cardiac, skin, blood vessel, and nervous tissue engineering, respectively. WIREs Nanomed Nanobiotechnol 2016, 8:654-677. doi: 10.1002/wnan.1391 For further resources related to this article, please visit the WIREs website.

  15. Stimuli-Responsive Liposomes for Controlled Drug Delivery

    KAUST Repository

    Li, Wengang

    2014-09-01

    Liposomes are promising drug delivery vesicles due to their biodegradibility, large volume and biocompatibility towards both hydrophilic and hydrophobic drugs. They suffer, however, from poor stability which limits their use in controlled delivery applications. Herein, a novel method was devised for modification of liposomes with small molecules, polymers or nanoparticles to afford stimuli responsive systems that release on demand and stay relatively stable in the absence of the trigger.. This dissertation discusses thermosensitive, pH sensitive, light sensitive and magnetically triggered liposomes that have been prepared for controlled drug delivery application. RAFT polymerization was utilized for the preparation of thermosensitive liposomes (Cholesterol-PNIPAm) and acid-labile liposomes (DOPE-PAA). With low Mw Cholesterol-PNIPAm, the thermosensitive liposomes proved to be effective for controlled release and decreased the cytotoxicity of PNIPAm by eliciting the polymer doses. By crosslinking the DOPE-PAA on liposome surface with acid-labile diamine linkers, DOPE-PAA liposomes were verified to be sensitive at low pH. The effects of polymer structures (linear or hyperbranched) have also been studied for the stability and release properties of liposomes. Finally, a dual-responsive Au@SPIO embedded liposome hybrid (ALHs) was prepared with light-induced “on-and-off” function by photo-thermal process (visible light) and instant release properties triggered by alternating magnetic field, respectively. The ALH system would be further applied into the cellular imaging field as MRI contrast agent.

  16. Thermosensitive liposomal drug delivery systems: state of the art review

    Directory of Open Access Journals (Sweden)

    Kneidl B

    2014-09-01

    Full Text Available Barbara Kneidl,1,2 Michael Peller,3 Gerhard Winter,2 Lars H Lindner,1 Martin Hossann11Department of Internal Medicine III, University Hospital Munich, 2Department of Pharmacy, Pharmaceutical Technology and Biopharmaceutics, 3Institute for Clinical Radiology, University Hospital Munich, Ludwig-Maximilians University, Munich, GermanyAbstract: Thermosensitive liposomes are a promising tool for external targeting of drugs to solid tumors when used in combination with local hyperthermia or high intensity focused ultrasound. In vivo results have demonstrated strong evidence that external targeting is superior over passive targeting achieved by highly stable long-circulating drug formulations like PEGylated liposomal doxorubicin. Up to March 2014, the Web of Science listed 371 original papers in this field, with 45 in 2013 alone. Several formulations have been developed since 1978, with lysolipid-containing, low temperature-sensitive liposomes currently under clinical investigation. This review summarizes the historical development and effects of particular phospholipids and surfactants on the biophysical properties and in vivo efficacy of thermosensitive liposome formulations. Further, treatment strategies for solid tumors are discussed. Here we focus on temperature-triggered intravascular and interstitial drug release. Drug delivery guided by magnetic resonance imaging further adds the possibility of performing online monitoring of a heating focus to calculate locally released drug concentrations and to externally control drug release by steering the heating volume and power. The combination of external targeting with thermosensitive liposomes and magnetic resonance-guided drug delivery will be the unique characteristic of this nanotechnology approach in medicine.Keywords: thermosensitive liposomes, phosphatidyloligoglycerol, hyperthermia, high intensity focused ultrasound, drug delivery, drug targeting

  17. Encapsulation of Liposomes within pH Responsive Microspheres for Oral Colonic Drug Delivery

    Directory of Open Access Journals (Sweden)

    M. J. Barea

    2012-01-01

    Full Text Available A novel liposome-in-microsphere (LIM formulation has been created comprising drug-loaded liposomes within pH responsive Eudragit S100 microspheres. The liposomes contained the model drug 5-ASA and were coated with chitosan in order to protect them during encapsulation within the microspheres and to improve site-specific release characteristics. In vitro drug release studies showed that LIMs prevented drug release within simulated stomach and small intestine conditions with subsequent drug release occurring in large intestine conditions. The formulation therefore has potential for oral colonic drug delivery.

  18. Nanotech approaches to drug delivery and imaging.

    Science.gov (United States)

    Sahoo, Sanjeeb K; Labhasetwar, Vinod

    2003-12-15

    Nanotechnology, a multidisciplinary scientific undertaking, involves creation and utilization of materials, devices or systems on the nanometer scale. The field of nanotechnology is currently undergoing explosive development on many fronts. The technology is expected to create innovations and play a critical role in various biomedical applications, not only in drug delivery, but also in molecular imaging, biomarkers and biosensors. Target-specific drug therapy and methods for early diagnosis of pathologies are the priority research areas where nanotechnology would play a vital role. This review considers different nanotechnology-based drug delivery and imaging approaches, and their economic impact on pharmaceutical and biomedical industries.

  19. A REVIEW: TRANSDERMAL DRUG DELIVERY OF NICOTINE

    Directory of Open Access Journals (Sweden)

    Saurabh Ravi

    2011-06-01

    Full Text Available Cigarette smoking has been the leading cause of premature death and illness in many industrialized country in the world, while the U.S. alone registers more than 4,00,000 deaths each year. The nicotine patch serves to deliver a constant dose of nicotine across the skin that helps to relieve the symptoms which are associated with tobacco withdrawal. Further, the use of carbon nanotube membranes and micro needle based transdermal drug delivery has lead to the great advancements. Some of the main advantages of transdermal drug delivery are bypassing of hepatic first pass metabolism, maintenance of steady plasma level of the drug and enhancement of therapeutic efficiency.

  20. Recent advances in multiaxial electrospinning for drug delivery.

    Science.gov (United States)

    Khalf, Abdurizzagh; Madihally, Sundararajan V

    2017-03-01

    Electrospun fibers have seen an insurgence in biomedical applications due to their unique characteristics. Coaxial and triaxial electrospinning techniques have added new impetus via fabrication of multilayered nano and micro-size fibers. These techniques offer the possibility of forming fibers with features such as blending, reinforced core, porous and hollow structure. The unique fabrication process can be used to tailor the mechanical properties, biological properties and release of various factors, which can potentially be useful in various controlled drug delivery applications. Harvesting these advantages, various polymers and their combinations have been explored in a number of drug delivery and tissue regeneration applications. New advances have shown the requirement of drug-polymer compatibility in addition to drug-solvent compatibility. We summarize recent findings using both hydrophilic and hydrophobic (or lipophilic) drugs in hydrophobic or hydrophilic polymers on release behavior. We also describe the fundamental forces involved during the electrospinning process providing insight to the factors to be considered to form fibers. Also, various modeling efforts on the drug release profiles are summarized. In addition new developments in the immune response to the electrospun fibers, and advances in scale-up issues needed for industrial size manufacturing.

  1. Applications of electrospinning/electrospraying in drug delivery.

    Science.gov (United States)

    Jahangiri, Azin; Adibkia, Khosro

    2016-01-01

    During recent years, nanoscaled materials have gained much attention because of their applications in the field of pharmaceutical and biomedical sciences. Electrospinning/electrospraying, as simple, effective and single-step methods, are used in the preparation of nanostructured materials (nanofibers and nanobeads). They offer an opportunity for direct encapsulation of the different types of drug molecules. The generated nanomaterials possess high surface area with porous characteristics, and the liberation of the loaded drugs follows a controlled-release pattern. Because of their wide applications in medical/pharmaceutical researches, the aim of this editorial is to highlight the importance of electrospinning/electrospraying technologies in drug delivery.

  2. Crystallization processes in pharmaceutical technology and drug delivery design

    Science.gov (United States)

    Shekunov, B. Yu; York, P.

    2000-04-01

    Crystallization is a major technological process for particle formation in pharmaceutical industry and, in addition, plays an important role in defining the stability and drug release properties of the final dosage forms. Industrial and regulatory aspects of crystallization are briefly reviewed with reference to solid-state properties of pharmaceuticals. Crystallization, incorporating wider definition to include precipitation and solid-state transitions, is considered in terms of preparation of materials for direct compression, formation of amorphous, solvated and polymorphic forms, chiral separation of drugs, production of materials for inhalation drug delivery and injections. Finally, recent developments in supercritical fluid particle technology is considered in relationship to the areas discussed.

  3. A Novel Drug Delivery System for Osteosarcoma Chemotherapy

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A thermo-responsive chitosan hydrogel system (TRCHS) was prepared by chitosan ( CS ) andβ- glycerophosphate ( β- GP ) to deliver Adriamycin (ADM) locally for curing osteosarcoma . Release property was investigated by release experiments in vitro and results show that it can be applied to local drug release because it is able to release drug at high concentration for 17 days. The treatment effect was studied by injecting intratumorally to osteosarcoma tumors ( CRL- 1427) implanted subcutaneously on Specific Pathogen-free (SPF) mice. The statistical analytical results show that TRCHS delivering ADM is more efficacious than saline intratumoral injection,which loads the same quantity of ADM , but is less poisonous. Based on the analysis above, this novel biodegradable polymer implant is an effective and safe vehicle for sustained local delivery of ADM, and is supposed to be applied in neoadjuvant chemotherapy for osteosarcoma.

  4. Macrophages as drug delivery vehicles for photochemical internalization (Conference Presentation)

    Science.gov (United States)

    Madsen, Steen J.; Gonzalez, Jonathan; Molina, Stephanie; Kumar Nair, Rohit; Hirschberg, Henry

    2017-02-01

    Targeted delivery of chemotherapeutic drugs to tumor sites is a major challenge in cancer chemotherapy. Cell-based vectorization of therapeutic agents has great potential for cancer therapy in that it can target and maintain an elevated concentration of therapeutic agents at the tumor site and prevent their spread into healthy tissue. The use of circulating cells such as monocytes/macrophages (Ma) offers several advantages compared to nanoparticles as targeted drug delivery vehicles. Ma can be easily obtained from the patient, loaded in vitro with drugs and reinjected into the blood stream. Ma can selectively cross the partially compromised blood-brain barrier surrounding brain tumors and are known to actively migrate to tumors, drawn by chemotactic factors, including hypoxic regions where conventional chemo and radiation therapy are least effective. The utility of Ma as targeted drug delivery vehicles for photochemical internalization (PCI) of tumors was investigated in this study. In vitro studies were conducted using a mixture of F98 rat glioma cells and rat macrophages loaded with a variety of chemotherapeutic agents including bleomycin and 5-fluorouracil. Preliminary data show that macrophages are resistant to both chemotherapeutics while significant toxicity is observed for F98 cells exposed to both drugs. Co-incubation of F98 cells with loaded Ma results in significant F98 toxicity suggesting that Ma are releasing the drugs and, hence providing the rationale for their use as delivery vectors for cancer therapies such as PCI.

  5. Nanostructured lipid carriers system: recent advances in drug delivery.

    Science.gov (United States)

    Iqbal, Md Asif; Md, Shadab; Sahni, Jasjeet Kaur; Baboota, Sanjula; Dang, Shweta; Ali, Javed

    2012-12-01

    Nanostructured lipid carrier (NLC) is second generation smarter drug carrier system having solid matrix at room temperature. This carrier system is made up of physiological, biodegradable and biocompatible lipid materials and surfactants and is accepted by regulatory authorities for application in different drug delivery systems. The availability of many products in the market in short span of time reveals the success story of this delivery system. Since the introduction of the first product, around 30 NLC preparations are commercially available. NLC exhibit superior advantages over other colloidal carriers viz., nanoemulsions, polymeric nanoparticles, liposomes, SLN etc. and thus, have been explored to more extent in pharmaceutical technology. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes NLC versatile delivery system for various routes of administration. The present review gives insights on the definitions and characterization of NLC as colloidal carriers including the production techniques and suitable formulations. This review paper also highlights the importance of NLC in pharmaceutical applications for the various routes of drug delivery viz., topical, oral, pulmonary, ocular and parenteral administration and its future perspective as a pharmaceutical carrier.

  6. Marketed New Drug Delivery Systems for Opioid Agonists/Antagonists Administration: A Rapid Overview

    OpenAIRE

    Soltani, Hoda; Pardakhty, Abbas

    2016-01-01

    Novel drug delivery systems for controlled-release of opioid agonists as a long time painkillers or opioid antagonists for opium, heroin, and alcohol addiction are under development or in clinical use today. In this article, the field of “new drug delivery systems” is momentarily reviewed from the viewpoint of the marketed opioid agonists/antagonists dosage forms today.

  7. Marketed New Drug Delivery Systems for Opioid Agonists/Antagonists Administration: A Rapid Overview.

    Science.gov (United States)

    Soltani, Hoda; Pardakhty, Abbas

    2016-04-01

    Novel drug delivery systems for controlled-release of opioid agonists as a long time painkillers or opioid antagonists for opium, heroin, and alcohol addiction are under development or in clinical use today. In this article, the field of "new drug delivery systems" is momentarily reviewed from the viewpoint of the marketed opioid agonists/antagonists dosage forms today.

  8. Polymer Micelles Laden Hydrogel Contact Lenses for Ophthalmic Drug Delivery.

    Science.gov (United States)

    Hu, Xiaohong; Tan, Huaping; Chen, Pin; Wang, Xin; Pang, Juan

    2016-06-01

    Hydrogel contact lens is an attractive drug carrier for the delivery of ophthalmic drugs. But limited drug loading capacity and burst release restricted its application in this field. Polymer micelle laden hydrogel contact lenses were designed for ophthalmic drug delivery in the work. β-CD/PAA/PEG ternary system was chosen to form polymer micelle. The micelle size could be adjusted by β-CD content and PAA/PEG concentration. The zeta potential of micelle was irrelevant to β-CD content, but influenced by PAA/PEG concentration. The absorbed drug concentration in micelle solution depended on both β-CD content and PAA/PEG concentration. Polymer micelle laden hydrogels were obtained by radical polymerization in situ. The transparency of polymer micelle laden hydrogel declined with PAA/PEG concentration increasing. The equilibrium water content and water loss showed that polymer micelle laden hydrogel with higher PAA/PEG concentration was in a higher swollen state. The dynamic viscoelastic properties howed that all polymer micelle laden hydrogels had some characteristics of crosslinked elastomers. The surface structure of freeze dried composite hydrogels was different from freeze dried pure hydrogel. The drug loading and releasing behaviors were detected to evaluate the drug loading and releasing capacity of hydrogels using orfloxacin and puerarin as model drugs. The results indicated the polymer micelle in hydrogel could hold or help to hold some ophthalmic drugs, and slow down orfloxacin release speed or keep puerarin stably stay for a time in hydrogels. In the end, it was found that the transparency of composite hydrogel became better after the hydrogel had been immersed in PBS for several weeks.

  9. Swellable drug-polyelectrolyte matrices of drug-carboxymethylcellulose complexes. Characterization and delivery properties.

    Science.gov (United States)

    Rigo, María V Ramírez; Allemandi, Daniel A; Manzo, Ruben H

    2009-02-01

    This article reports the development and delivery properties of swellable drug-polyelectrolyte matrices prepared with complexes of the acid form of carboxymethylcellulose (HCMC). Drug-polyelelectrolyte complexes (HCMC-D) were obtained by neutralization of HCMC with two model basic drugs (atenolol and metoclopramide). Characterization through FT-infrared spectroscopy, power X-ray diffraction, and DSC indicates the ionic nature of the interaction between the carboxylic groups of HCMC and the basic group of D. Matrices prepared by compacting (HCMC-D) alone or in a mixture with sodium carboxymethylcellulose were subjected to measurements of solvent up-take, dynamics of swelling, and release kinetics. Delivery rate of mixed matrices is a function of its composition and may be widely modulated. They exhibited anomalous delivery kinetics with Korsmeyer exponent n in the range 0.67-0.87. Experimental results indicate that the erosion of the hydrogel layer is the main delivery process.

  10. Advanced Analgesic Drug Delivery and Nanobiotechnology.

    Science.gov (United States)

    Stoicea, Nicoleta; Fiorda-Diaz, Juan; Joseph, Nicholas; Shabsigh, Muhammad; Arias-Morales, Carlos; Gonzalez-Zacarias, Alicia A; Mavarez-Martinez, Ana; Marjoribanks, Stephen; Bergese, Sergio D

    2017-07-01

    Transdermal administration of analgesic medications offers several benefits over alternative routes of administration, including a decreased systemic drug load with fewer side effects, and avoidance of drug degradation by the gastrointestinal tract. Transdermal administration also offers a convenient mode of drug administration over an extended period of time, particularly desirable in pain medicine. A transdermal administration route may also offer increased safety for drugs with a narrow therapeutic window. The primary barrier to transdermal drug absorption is the skin itself. Transdermal nanotechnology offers a novel method of achieving enhanced dermal penetration with an extended delivery profile for analgesic drugs, due to their small size and relatively large surface area. Several materials have been used to enhance drug duration and transdermal penetration. The application of nanotechnology in transdermal delivery of analgesics has raised new questions regarding safety and ethical issues. The small molecular size of nanoparticles enables drug delivery to previously inaccessible body sites. To ensure safety, the interaction of nanoparticles with the human body requires further investigation on an individual drug basis, since different formulations have unique properties and side effects.

  11. Solid lipid particles for oral delivery of peptide and protein drugs III - the effect of fed state conditions on the in vitro release and degradation of desmopressin

    DEFF Research Database (Denmark)

    Christophersen, Philip C; Vaghela, Dimple; Müllertz, Anette;

    2014-01-01

    of oleic acid glycerides accelerated the release of desmopressin significantly from all solid lipid particles both in the presence and absence of lipase. The presence of oleic acid glycerides also reduced the degradation rate of desmopressin, probably due to the interactions between the lipids...

  12. Establishing Structure Property Relationship in Drug Partitioning into and Release from Niosomes: Physical Chemistry Insights with Anti-Inflammatory Drugs.

    Science.gov (United States)

    Dasgupta, Moumita; Kishore, Nand

    2017-08-31

    Understanding physical chemistry underlying interactions of drugs with delivery formulations is extremely important in devising effective drug delivery systems. The partitioning and release kinetics of diclofenac sodium and naproxen from Brij 30 and Triton X-100 niosomal formulations have been addressed based on structural characterization, partitioning energetics and release kinetics, thus establishing relationship between structures and observed properties. Both the drugs partition in nonpolar regions of TX-100 niosomes via stacking of aromatic rings. The combined effects of interactions of the drugs with polar head groups and the rigidity of the niosome vesicles determine entry and partitioning of drugs into niosomes. The observed slower rate of release of the drugs from the drug encapsulated niosomes of TX-100 than those of Brij 30, suggest stable complexation of drugs in the nonpolar interior of the former. No release of drugs from the niosomes was observed till 24 h even upon varying pH conditions without SDS. However SDS in drug loaded niosomes led to release of drugs in as early as 6 h. The sustained pattern of in vitro release kinetics of the drugs thus observed from our niosomal preparations suggest these vesicular systems to be promising for pharamaceutical applications as potential drug delivery vehicles.

  13. Marine Origin Polysaccharides in Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Matias J. Cardoso

    2016-02-01

    Full Text Available Oceans are a vast source of natural substances. In them, we find various compounds with wide biotechnological and biomedical applicabilities. The exploitation of the sea as a renewable source of biocompounds can have a positive impact on the development of new systems and devices for biomedical applications. Marine polysaccharides are among the most abundant materials in the seas, which contributes to a decrease of the extraction costs, besides their solubility behavior in aqueous solvents and extraction media, and their interaction with other biocompounds. Polysaccharides such as alginate, carrageenan and fucoidan can be extracted from algae, whereas chitosan and hyaluronan can be obtained from animal sources. Most marine polysaccharides have important biological properties such as biocompatibility, biodegradability, and anti-inflammatory activity, as well as adhesive and antimicrobial actions. Moreover, they can be modified in order to allow processing them into various shapes and sizes and may exhibit response dependence to external stimuli, such as pH and temperature. Due to these properties, these biomaterials have been studied as raw material for the construction of carrier devices for drugs, including particles, capsules and hydrogels. The devices are designed to achieve a controlled release of therapeutic agents in an attempt to fight against serious diseases, and to be used in advanced therapies, such as gene delivery or regenerative medicine.

  14. Polymerized rosin: novel film forming polymer for drug delivery.

    Science.gov (United States)

    Fulzele, S V; Satturwar, P M; Dorle, A K

    2002-12-05

    Polymerized rosin (PR) a novel film forming polymer is characterized and investigated in the present study for its application in drug delivery. Films were produced by a casting/solvent evaporation method from plasticizer free and plasticizer containing solutions. Films prepared from different formulations were studied for their mechanical (tensile strength, percent elongation and Young's modulus), water vapour transmission and moisture absorption characteristics. Neat PR films were slightly brittle and posed the problem of breaking during handling. Hydrophobic plasticizers, dibutyl sebacate and tributyl citrate, improved the mechanical properties of free films with both the plasticizers showing significant effects on film elongation. Release of diclofenac sodium (model drug) from coated pellets was sustained with high coating levels. Concentration of plasticizer was found to affect the release profile. PR films plasticized with hydrophobic plasticizers could therefore be used in coating processes for the design of oral sustained delivery dosage forms.

  15. Delivery of Encapsulated Drugs to Cancer Cells and Tissue: The Impact of Ultrasound

    OpenAIRE

    Afadzi, Mercy

    2013-01-01

    Encapsulated drugs have improved tumor to normal tissue uptake compared to free drugs, however, the concentration of drugs at the tumor site is still low and heterogeneous due to the tumor microenvironment which serves as barriers for the delivery to the target site. Combining ultrasound (US) with encapsulated drugs might enhance the transport of the encapsulated drug across the vasculature and into tumor tissues. US can also increase local drug release and the uptake of the drug into cancer ...

  16. Trojan Microparticles for Drug Delivery

    OpenAIRE

    Vandamme, Thierry F.; Nicolas Anton; Anshuman Jakhmola

    2012-01-01

    During the last decade, the US Food and Drug Administration (FDA) have regulated a wide range of products, (foods, cosmetics, drugs, devices, veterinary, and tobacco) which may utilize micro and nanotechnology or contain nanomaterials. Nanotechnology allows scientists to create, explore, and manipulate materials in nano-regime. Such materials have chemical, physical, and biological properties that are quite different from their bulk counterparts. For pharmaceutical applications and in order t...

  17. Molecularly imprinted polymers based drug delivery devices: a way to application in modern pharmacotherapy. A review.

    Science.gov (United States)

    Luliński, Piotr

    2017-07-01

    This review presents the current status of molecularly imprinted polymers (MIPs) for drug delivery, in particular the studies that focus on biocompatibility, cytotoxicity, and in vitro or in vivo behavior of MIPs. It also shows the limitations that hamper the introduction of MIPs to pharmacotherapy and prevent this class of polymers from commercialization. MIPs are promising materials in the construction of drug delivery devices because they can provide improved delivery profiles or longer release times and deliver the drugs in the feedback regulated way, which is extremely important in modern pharmacotherapy. Here, a brief overview of the imprinting process and a concise description of drug release mechanisms from the imprinted materials will be presented followed by the discussion of potential MIP drug delivery devices for ocular, dermal, intravenous and oral routes of administration. Finally, future prospects for imprinted drug delivery forms will be outlined. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs

    DEFF Research Database (Denmark)

    Christophersen, Philip Carsten; Fano, Mathias; Saaby, Lasse

    2015-01-01

    Oral drug delivery is a preferred route because of good patient compliance. However, most peptide/ protein drugs are delivered via parenteral routes because of the absorption barriers in the gastrointestinal (GI) tract such as enzymatic degradation by proteases and low permeability acrossthe...... biological membranes. To overcome these barriers, different formulation strategies for oral delivery of biomacromolecules have been proposed, including lipid based formulations and polymer-based particulate drug delivery systems (DDS). The aim of this review is to summarize the existing knowledge about oral...... delivery of peptide/protein drugs and to provide an overview of formulationand characterization strategies. For a better understanding of the challenges in oral delivery of peptide/protein drugs, the composition of GI fluids and the digestion processes of different kinds of excipients in the GI tract...

  19. CURRENT STATUS AND FUTURE INNOVATIONS IN TRANSDERMAL DRUG DELIVERY

    Directory of Open Access Journals (Sweden)

    Shalini Chhabaria et al

    2012-08-01

    Full Text Available Transdermal drug delivery system (TDDS in comparison to conventional system offers sustained drug release as well as decrease the intensity of action and decrease in the side effects associated with conventional therapy. Presently only about 40 products of more than 20 drug molecules are available in market. The barrier property of the stratum corneum is the main obstructer in the release of drug from the transdermal patch. Various approaches to overcome this barrier function of skin have been broadly studied. Innovations in technologies continue to occur at a positive rate, making the technology a productive and exciting area of innovation, research and product development. In this review, various new development in the field of TDDS are included which are intended to be a need base system. In this review, we have summarized various physical and chemical approaches for transdermal flux enhancement as well as the application of electricity, ultrasound, microneedle and chemical enhancers.

  20. Hydrogels: an interesting strategy for smart drug delivery.

    Science.gov (United States)

    González-Alvarez, Marta; González-Alvarez, Isabel; Bermejo, Marival

    2013-02-01

    Hydrogels are novel delivery systems that have drawn much attention in the current pharmaceutical scenario. Of all the advantages, the most important is their versatility, which makes them optimal for any kind of molecule, adequate to be administered by any administration route and capable to modulate the desired release profile. Current research is managed to solve the limitations of this systems; mainly the low mechanical strength and lack of control of release in time and quantity, and the reversibility of the delivery. Several approaches such as the use of multi-stimuli-sensitive mechanisms, the enhancement of mechanical properties using chemical crosslinkers, development of polyelectrolyte complexes, the increment of interpenetrating networks or composite hydrogels are providing excellent results. These systems represent a promising alternative due to the countless possibilities to offer for modulating drug release.

  1. Temperature and magnetism bi-responsive molecularly imprinted polymers: Preparation, adsorption mechanism and properties as drug delivery system for sustained release of 5-fluorouracil.

    Science.gov (United States)

    Li, Longfei; Chen, Lin; Zhang, Huan; Yang, Yongzhen; Liu, Xuguang; Chen, Yongkang

    2016-04-01

    Temperature and magnetism bi-responsive molecularly imprinted polymers (TMMIPs) based on Fe3O4-encapsulating carbon nanospheres were prepared by free radical polymerization, and applied to selective adsorption and controlled release of 5-fluorouracil (5-FU) from an aqueous solution. Characterization results show that the as-synthesized TMMIPs have an average diameter of about 150 nm with a typical core-shell structure, and the thickness of the coating layer is approximately 50 nm. TMMIPs also displayed obvious magnetic properties and thermo-sensitivity. The adsorption results show that the prepared TMMIPs exhibit good adsorption capacity (up to 96.53 mg/g at 25 °C) and recognition towards 5-FU. The studies on 5-FU loading and release in vitro suggest that the release rate increases with increasing temperature. Meanwhile, adsorption mechanisms were explored by using a computational analysis to simulate the imprinted site towards 5-FU. The interaction energy between the imprinted site and 5-FU is -112.24 kJ/mol, originating from a hydrogen bond, Van der Waals forces and a hydrophobic interaction between functional groups located on 5-FU and a NIPAM monomer. The electrostatic potential charges and population analysis results suggest that the imprinted site of 5-FU can be introduced on the surface of TMMIPs, confirming their selective adsorption behavior for 5-FU.

  2. EXPLOITING NANOSCALE MATERIALS PROPERTIES FOR CONTROLLED DRUG DELIVERY SYSTEMS

    OpenAIRE

    Che Rose, Laili

    2013-01-01

    Abstract The main objective of this work was to develop a novel drug delivery system exploiting special opportunities afforded by synthesis of nanoscale materials to be applied inside the colon. It must be robust enough to cope with the adverse conditions in the gastrointestinal tract (GI) and be able to reach and release “on demand” at the colon area at the right time. In this work, an oral capsule formulation with iron oxide nanoparticles (IONs) containing coating was used...

  3. AN OVERVIEW ON VARIOUS APPROACHES TO ORAL CONTROLLED DRUG DELIVERY SYSTEM VIA GASTRORETENTIVE DRUG DELIVERY SYSTEM

    Directory of Open Access Journals (Sweden)

    Bhalla.Neetika

    2012-04-01

    Full Text Available In recent years scientific and technological advancements have been made in the research and development of oral drug delivery system. Oral sustained drug delivery system is complicated by limited gastric residence times (GRTs. In order to understand various physiological difficulties to achieve gastric retention, we have summarized important factors controlling gastric retention. To overcome these limitations, various approaches have been proposed to increase gastric residence of drug delivery systems in the upper part of the gastrointestinal tract includes floating drug dosage systems (FDDS, swelling or expanding systems , mucoadhesive systems , magnetic systems, modified-shape systems, high density system and other delayed gastric emptying devices.

  4. Liposomes as delivery systems for antineoplastic drugs

    Science.gov (United States)

    Medina, Luis Alberto

    2014-11-01

    Liposome drug formulations are defined as pharmaceutical products containing active drug substances encapsulated within the lipid bilayer or in the interior aqueous space of the liposomes. The main importance of this drug delivery system is based on its drastic reduction in systemic dose and concomitant systemic toxicity that in comparison with the free drug, results in an improvement of patient compliance and in a more effective treatment. There are several therapeutic drugs that are potential candidates to be encapsulated into liposomes; particular interest has been focused in therapeutic and antineoplastic drugs, which are characterized for its low therapeutic index and high systemic toxicity. The use of liposomes as drug carriers has been extensively justified and the importance of the development of different formulations or techniques to encapsulate therapeutic drugs has an enormous value in benefit of patients affected by neoplastic diseases.

  5. Assessment of cutaneous drug delivery using microdialysis

    DEFF Research Database (Denmark)

    Kreilgaard, Mads

    2002-01-01

    During the last decade microdialysis has been successfully applied to assess cutaneous drug delivery of numerous substances, indicating the large potential for bioequivalence/bioavailability evaluation of topical formulations. The technique has been shown to be minimally invasive and supply...... pharmacokinetic information directly in the target organ for cutaneous drug delivery with high temporal resolution without further intervention with the tissue after implantation. However, there are a few challenges that need to be addressed before microdialysis can be regarded as a generally applicable routine...... technique for cutaneous drug delivery assessments. Firstly, the technique is currently not suitable for sampling of highly lipophilic compounds and, secondly, more studies are desirable for elucidation of the variables associated with the technique to increase reproducibility. The present literature...

  6. FLOATING DRUG DELIVERY SYSTEM - CHRONOTHERAPEUTIC APPROACH

    Directory of Open Access Journals (Sweden)

    Vishal Kalal

    2011-04-01

    Full Text Available The purpose of writing this review on the floating drug delivery systems (FDDS was to compile the recent literature with special focus on the principal mechanism of floatation to achieve gastric retention. FDDS is one of the approaches in chronotherapeutic drug delivery. In the past reviews of FDDS the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, their classification and formulation aspects have been covered. This review summarizes the special focus on chronotherapeutics, diseases affected by biological rhythm, its importance, advantages, various approaches in Chronotherapeutic drug delivery and applications of FDDS. These systems are useful for several problems encountered during the development of a pharmaceutical dosage forms.

  7. Ultrasound triggered image-guided drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Boehmer, Marcel R. [Philips Research Europe, Biomolecular Engineering, HTC11, 5656 AE Eindhoven (Netherlands); Department of Cardiology and Angiology, University Hospital Muenster, Albert Schweitzerstrasse 33, 48149 Muenster (Germany)], E-mail: marcel.bohmer@philips.com; Klibanov, Alexander L. [Cardiovascular Division, Department of Medicine, Cobb Hall, University of Virginia School of Medicine, Hospital Drive, Cobb Hall RM 1026, Charlottesville, VA 22908-158 (United States); Tiemann, Klaus [Department of Cardiology and Angiology, University Hospital Muenster, Albert Schweitzerstrasse 33, 48149 Muenster (Germany); Hall, Christopher S. [Philips Research North America, Ultrasound Imaging and Therapy, 345 Scarborough Road, Briarcliff Manor, NY 10510 (United States); Gruell, Holger; Steinbach, Oliver C. [Philips Research Europe, Biomolecular Engineering, HTC11, 5656 AE Eindhoven (Netherlands)

    2009-05-15

    The integration of therapeutic interventions with diagnostic imaging has been recognized as one of the next technological developments that will have a major impact on medical treatments. Important advances in this field are based on a combination of progress in guiding and monitoring ultrasound energy, novel drug classes becoming available, the development of smart delivery vehicles, and more in depth understanding of the mechanisms of the cellular and molecular basis of diseases. Recent research demonstrates that both pressure sensitive and temperature sensitive delivery systems hold promise for local treatment. The use of ultrasound for the delivery of drugs has been demonstrated in particular the field of cardiology and oncology for a variety of therapeutics ranging from small drug molecules to biologics and nucleic acids.

  8. Alginate-based hybrid aerogel microparticles for mucosal drug delivery.

    Science.gov (United States)

    Gonçalves, V S S; Gurikov, P; Poejo, J; Matias, A A; Heinrich, S; Duarte, C M M; Smirnova, I

    2016-10-01

    The application of biopolymer aerogels as drug delivery systems (DDS) has gained increased interest during the last decade since these structures have large surface area and accessible pores allowing for high drug loadings. Being biocompatible, biodegradable and presenting low toxicity, polysaccharide-based aerogels are an attractive carrier to be applied in pharmaceutical industry. Moreover, some polysaccharides (e.g. alginate and chitosan) present mucoadhesive properties, an important feature for mucosal drug delivery. This feature allows to extend the contact of DDS with biological membranes, thereby increasing the absorption of drugs through the mucosa. Alginate-based hybrid aerogels in the form of microparticles (alginate and further dried with supercritical CO2 (sc-CO2). Spherical mesoporous aerogel microparticles were obtained for alginate, hybrid alginate/pectin and alginate/κ-carrageenan aerogels, presenting high specific surface area (370-548m(2)g(-1)) and mucoadhesive properties. The microparticles were loaded with ketoprofen via adsorption from its solution in sc-CO2, and with quercetin via supercritical anti-solvent precipitation. Loading of ketoprofen was in the range between 17 and 22wt% whereas quercetin demonstrated loadings of 3.1-5.4wt%. Both the drugs were present in amorphous state. Loading procedure allowed the preservation of antioxidant activity of quercetin. Release of both drugs from alginate/κ-carrageenan aerogel was slightly faster compared to alginate/pectin. The results indicate that alginate-based aerogel microparticles can be viewed as promising matrices for mucosal drug delivery applications.

  9. Injectable biopolymer based hydrogels for drug delivery applications.

    Science.gov (United States)

    Atta, Sadia; Khaliq, Shaista; Islam, Atif; Javeria, Irtaza; Jamil, Tahir; Athar, Muhammad Makshoof; Shafiq, Muhammad Imtiaz; Ghaffar, Abdul

    2015-09-01

    Biopolymer based pH-sensitive hydrogels were prepared using chitosan (CS) with polyethylene glycol (PEG) of different molecular weights in the presence of silane crosslinker. The incorporated components remain undissolved in different swelling media as they are connected by siloxane linkage which was confirmed by Fourier transform infrared spectroscopy. The swelling in water was enhanced by the addition of higher molecular weight PEG. The swelling behaviour of the hydrogels against pH showed high swelling in acidic and basic pH, whereas, low swelling was examined at pH 6 and 7. This characteristic pH responsive behaviour at neutral pH made them suitable for injectable controlled drug delivery. The controlled release analysis of Cefixime (CFX) (model drug) loaded CS/PEG hydrogel exhibited that the entire drug was released in 30 min in simulated gastric fluid (SGF) while in simulated intestinal fluid (SIF), 85% of drug was released in controlled manner within 80 min. This inferred that the developed hydrogels can be an attractive biomaterial for injectable drug delivery with physiological pH and other biomedical applications.

  10. Ultrasound-mediated gastrointestinal drug delivery.

    Science.gov (United States)

    Schoellhammer, Carl M; Schroeder, Avi; Maa, Ruby; Lauwers, Gregory Yves; Swiston, Albert; Zervas, Michael; Barman, Ross; DiCiccio, Angela M; Brugge, William R; Anderson, Daniel G; Blankschtein, Daniel; Langer, Robert; Traverso, Giovanni

    2015-10-21

    There is a significant clinical need for rapid and efficient delivery of drugs directly to the site of diseased tissues for the treatment of gastrointestinal (GI) pathologies, in particular, Crohn's and ulcerative colitis. However, complex therapeutic molecules cannot easily be delivered through the GI tract because of physiologic and structural barriers. We report the use of ultrasound as a modality for enhanced drug delivery to the GI tract, with an emphasis on rectal delivery. Ultrasound increased the absorption of model therapeutics inulin, hydrocortisone, and mesalamine two- to tenfold in ex vivo tissue, depending on location in the GI tract. In pigs, ultrasound induced transient cavitation with negligible heating, leading to an order of magnitude enhancement in the delivery of mesalamine, as well as successful systemic delivery of a macromolecule, insulin, with the expected hypoglycemic response. In a rodent model of chemically induced acute colitis, the addition of ultrasound to a daily mesalamine enema (compared to enema alone) resulted in superior clinical and histological scores of disease activity. In both animal models, ultrasound treatment was well tolerated and resulted in minimal tissue disruption, and in mice, there was no significant effect on histology, fecal score, or tissue inflammatory cytokine levels. The use of ultrasound to enhance GI drug delivery is safe in animals and could augment the efficacy of GI therapies and broaden the scope of agents that could be delivered locally and systemically through the GI tract for chronic conditions such as inflammatory bowel disease.

  11. 3D lithographically fabricated nanoliter containers for drug delivery.

    Science.gov (United States)

    Randall, Christina L; Leong, Timothy G; Bassik, Noy; Gracias, David H

    2007-12-22

    Lithographic patterning offers the possibility for precise structuring of drug delivery devices. The fabrication process can also facilitate the incorporation of advanced functionality for imaging, sensing, telemetry and actuation. However, a major limitation of present day lithographic fabrication is the inherent two-dimensionality of the patterning process. We review a new approach to construct three dimensional (3D) patterned containers by lithographically patterning two dimensional (2D) templates with liquefiable hinges that spontaneously fold upon heating into hollow polyhedral containers. The containers have finite encapsulation volumes, can be made small enough to pass through a hypodermic needle, and the 3D profile of the containers facilitates enhanced diffusion with the surrounding medium as compared to reservoir systems fabricated in planar substrates. We compare the features of the containers to those of present day drug delivery systems. These features include ease of manufacture, versatility in size and shape, monodisperse porosity, ability for spatial manipulation and remote triggering to release drugs on-demand, the incorporation of electronic modules, cell encapsulation, biocompatibility and stability. We also review possible applications in drug delivery and cell encapsulation therapy (CET). The results summarized in this review suggest a new strategy to enable construction of "smart", three dimensional drug delivery systems using lithography.

  12. Interpenetrating Polymer Networks as Innovative Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Alka Lohani

    2014-01-01

    Full Text Available Polymers have always been valuable excipients in conventional dosage forms, also have shown excellent performance into the parenteral arena, and are now capable of offering advanced and sophisticated functions such as controlled drug release and drug targeting. Advances in polymer science have led to the development of several novel drug delivery systems. Interpenetrating polymer networks (IPNs have shown superior performances over the conventional individual polymers and, consequently, the ranges of applications have grown rapidly for such class of materials. The advanced properties of IPNs like swelling capacity, stability, biocompatibility, nontoxicity and biodegradability have attracted considerable attention in pharmaceutical field especially in delivering bioactive molecules to the target site. In the past few years various research reports on the IPN based delivery systems showed that these carriers have emerged as a novel carrier in controlled drug delivery. The present review encompasses IPNs, their types, method of synthesis, factors which affects the morphology of IPNs, extensively studied IPN based drug delivery systems, and some natural polymers widely used for IPNs.

  13. Organic nanotubes for drug loading and cellular delivery.

    Science.gov (United States)

    Wakasugi, Ai; Asakawa, Masumi; Kogiso, Masaki; Shimizu, Toshimi; Sato, Mamiko; Maitani, Yoshie

    2011-07-15

    Organic nanotubes made of synthetic amphiphilic molecules are novel materials that form by self-assembly. In this study, organic nanotubes with a carboxyl group (ONTs) at the surface were used as a carrier for the anticancer drug doxorubicin, which has a weak amine group. The IC(50) values of ONT for cells were higher than that of conventional liposomes, suggesting that ONTs are safe. The results showed that the drug loading of ONTs was susceptible to the effect of ionic strength and H(+) concentration in the medium, and drug release from ONTs was promoted at lower pH, which is favorable for the release of drugs in the endosome after cellular uptake. ONTs loaded with the drug were internalized, and the drug was released quickly in the cells, as demonstrated on transmission electron microscopy images of ONTs and the detection of a 0.05% dose of ONT chelating gadolinium in the cells. Moreover, ONT could be modified chemically with folate by simply mixing with a folate-conjugate lipid. Therefore, these novel, biodegradable organic nanotubes have the potential to be used as drug carriers for controlled and targeting drug delivery.

  14. Light induced drug delivery into cancer cells.

    Science.gov (United States)

    Shamay, Yosi; Adar, Lily; Ashkenasy, Gonen; David, Ayelet

    2011-02-01

    Cell-penetrating peptides (CPPs) can be used for intracellular delivery of a broad variety of cargoes, including various nanoparticulate pharmaceutical carriers. However, the cationic nature of all CPP sequences, and thus lack of cell specificity, limits their in vivo use for drug delivery applications. Here, we have devised and tested a strategy for site-specific delivery of dyes and drugs into cancer cells by using polymers bearing a light activated caged CPP (cCPP). The positive charge of Lys residues on the minimum sequence of the CPP penetratin ((52)RRMKWKK(58)) was masked with photo-cleavable groups to minimize non-specific adsorption and cellular uptake. Once illuminated by UV light, these protecting groups were cleaved, the positively charged CPP regained its activity and facilitated rapid intracellular delivery of the polymer-dye or polymer-drug conjugates into cancer cells. We have found that a 10-min light illumination time was sufficient to enhance the penetration of the polymer-CPP conjugates bearing the proapoptotic peptide, (D)(KLAKLAK)(2), into 80% of the target cells, and to promote a 'switch' like cytotoxic activity resulting a shift from 100% to 10% in cell viability after 2 h. This report provides an example for tumor targeting by means of light activation of cell-penetrating peptides for intracellular drug delivery.

  15. Transungual drug delivery: current status.

    Science.gov (United States)

    Elkeeb, Rania; AliKhan, Ali; Elkeeb, Laila; Hui, Xiaoying; Maibach, Howard I

    2010-01-15

    Topical therapy is highly desirable in treating nail disorders due to its localized effects, which results in minimal adverse systemic events and possibly improved adherence. However, the effectiveness of topical therapies is limited by minimal drug permeability through the nail plate. Current research on nail permeation that focuses on altering the nail plate barrier by means of chemical treatments, penetration enhancers as well as physical and mechanical methods is reviewed. A new method of nail sampling is examined. Finally limitations of current ungual drug permeability studies are briefly discussed.

  16. Aptamers for Targeted Drug Delivery

    Directory of Open Access Journals (Sweden)

    Partha Ray

    2010-05-01

    Full Text Available Aptamers are a class of therapeutic oligonucleotides that form specific three-dimensional structures that are dictated by their sequences. They are typically generated by an iterative screening process of complex nucleic acid libraries employing a process termed Systemic Evolution of Ligands by Exponential Enrichment (SELEX. SELEX has traditionally been performed using purified proteins, and cell surface receptors may be challenging to purify in their properly folded and modified conformations. Therefore, relatively few aptamers have been generated that bind cell surface receptors. However, improvements in recombinant fusion protein technology have increased the availability of receptor extracellular domains as purified protein targets, and the development of cell-based selection techniques has allowed selection against surface proteins in their native configuration on the cell surface. With cell-based selection, a specific protein target is not always chosen, but selection is performed against a target cell type with the goal of letting the aptamer choose the target. Several studies have demonstrated that aptamers that bind cell surface receptors may have functions other than just blocking receptor-ligand interactions. All cell surface proteins cycle intracellularly to some extent, and many surface receptors are actively internalized in response to ligand binding. Therefore, aptamers that bind cell surface receptors have been exploited for the delivery of a variety of cargoes into cells. This review focuses on recent progress and current challenges in the field of aptamer-mediated delivery.

  17. Matrix embedded microspherules containing indomethacin as controlled drug delivery systems.

    Science.gov (United States)

    Swamy, K M Lokamatha; Satyanath, B; Shantakumar, S M; Manjula, D; Mohammedi, Hafsa; Farhana, Ayesha

    2008-10-01

    This work is focused on the development of controlled drug delivery systems using different wax/fat embedded indomethacin (IM). Discrete wax/fat embedded microspherules containing indomethacin were prepared by using cetostearyl alcohol, paraffin wax and stearic acid by employing emulsification-phase separation method. These matrices have been used as barrier coatings due to their hydrophobic nature. Chemically inert and tasteless nature of wax/fats promotes their use as taste masking agents for bitter drugs. Various waxes and fats are available having different physicochemical properties to suit the needs of formulation. Methyl cellulose (MC) 1% w/v, sodium alginate (SA) 0.5% w/v and Tween-80 (TW) 1% w/v were used as emulgents. The resulting microspherules were discrete, large, spherical and also free flowing. It is revealed from the literature that natures of wax/fat emulgents were found to influence the rate of drug release. In the present work the drug content in all the batches of microspherules were found to be uniform. The rate of drug release corresponded best to first order kinetics, followed by Higuchi and zero-order equations. The release of the model drug from these wax/fat microspherules was prolonged over an extended period of time and the drug release mechanism followed anomalous (non-Fickian) diffusion controlled as well as Super Case II transport. Among the three matrix materials used, paraffin wax retarded the drug release more than the other two. Surface characteristics of microspherules have been studied by Scanning Electron Microscope (SEM). A fair degree rank of correlation was found to exist between the size and release retardation in all the three-wax/fat emulgent combinations.

  18. TRANSDERMAL DRUG DELIVERY ADHESION AS A CRITICAL PARAMETER

    Directory of Open Access Journals (Sweden)

    Singh Mahavir

    2013-09-01

    Full Text Available Transdermal drug delivery system (TDDS, also known as “patches”, are the dosage forms designed to deliver a therapeutically effective amount of drug across a patient’s skin. The adhesive of the transdermal drug delivery system is very crucial to the safety, efficacy and quality of the product. Recently, it has been recognized that the skin can also serve as the port of administration for systemically active drugs. The drugs applied topically are first absorbed into the blood stream and then are transported to the target tissues. Now, it is becoming evident that the benefits of intra venous infusion can be closely duplicated by using skin as the port of drug administration to provide continuous transdermal drug infusion into the systemic circulation. One of the objectives of TDDS is the maintenance of blood concentration of drug at therapeutic level by means of controlled permeation throughout the skin during a long period of time and using only one administration. The drug input can be terminated at any point of time by just removing the patch. Rate of drug release from the TDDS is normally much greater than the amount that the skin can possibly absorb. Hence, even if there is a variation in skin permeability, a constant rate of drug input into the circulation is achieved. This article provides an overview of type of transdermal systems, role of adhesion, possible adhesion failures and the measurement of adhesion. In vitro techniques like peel adhesion, tack and shear strength are discussed. Adhesion needs to be a critical parameter for designing a transdermal drug delivery system in order to provide good quality and efficacy to the patient. This review also covers a brief outline of various components of a patch, their advantages, when the patch should be used and when their use should be avoided.

  19. Intracochlear drug delivery in combination with cochlear implants : Current aspects.

    Science.gov (United States)

    Plontke, S K; Götze, G; Rahne, T; Liebau, A

    2017-01-01

    Local drug application to the inner ear offers a number of advantages over systemic delivery. Local drug therapy currently encompasses extracochlear administration (i. e., through intratympanic injection), intracochlear administration (particularly for gene and stem cell therapy), as well as various combinations with auditory neurosensory prostheses, either evaluated in preclinical or clinical studies, or off-label. To improve rehabilitation with cochlear implants (CI), one focus is the development of drug-releasing electrode carriers, e. g., for delivery of glucocorticosteroids, antiapoptotic substances, or neurotrophins to the inner ear. The performance of cochlear implants may thus be improved by protecting neuronal structures from insertion trauma, reducing fibrosis in the inner ear, and by stimulating growth of neuronal structures in the direction of the electrodes. Controlled drug release after extracochlear or intracochlear application in conjunction with a CI can also be achieved by use of a biocompatible, resorbable controlled-release drug-delivery system. Two case reports for intracochlear controlled release drug delivery in combination with cochlear implants are presented. In order to treat progressive reduction in speech discrimination and increased impedance, two cochlear implant patients successfully underwent intracochlear placement of a biocompatible, resorbable drug-delivery system for controlled release of dexamethasone. The drug levels reached in inner ear fluids after different types of local drug application strategies can be calculated using a computer model. The intracochlear drug concentrations calculated in this way were compared for different dexamethasone application strategies.

  20. Effect of hydroxypropyl-beta-cyclodextrin on the solubility, stability and in-vitro release of ciprofloxacin for ocular drug delivery.

    Science.gov (United States)

    Bozkir, Asuman; Denli, Zeynep Fusun; Basaran, Berrin

    2012-01-01

    Eye drops in the form of an aqueous solution with a lower viscosity are preferred for local administrations in ophthalmology. In ophthalmic formulations, cyclodextrins (CDs) are frequently used in recent years in order to increase water solubility, stability and bioavailability of an active substance and decrease an irritation to the eye. The scope of the present study was to investigate the influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the solubility, stability and in vitro release of ciprofloxacin (CIP). According to the phase solubility studies, A(L) type solubility curve was obtained. HPCD improved the solubility of CIP 3 times at pH 5.5 and 2 times at pH 7.4. The two month stability studies indicated that CIP was more stable at pH 5.5 than at pH 7.4 and the stability of CIP was significantly increased by HPCD. The stability constant of the HPCD:CIP complex was increased further by a-ddition of 0.1% (w/v) polymer (HPMC and PVP) to the aqueous medium including HPCD. Stability constant of solutions prepared in an ultrasonic water bath was higher than solutions prepared by heating in an autoclave. The results indicated that the CIP:HPCD complex increased in vitro release of CIP and the addition of polymer promoted this increase even more.

  1. ELASTIC LIPOSOME: DRUG DELIVERY ACROSS HUMAN SKIN

    Directory of Open Access Journals (Sweden)

    Vardhan Harsh

    2012-04-01

    Full Text Available Transdermal drug delivery is hardly an old technology, since 1800’s and the technology is no longer just adhesive patches. Due to recent advances in technology and the ability to apply the drug to the site of action without rupturing the skin membrane, transdermal route is becoming a widely accepted route of drug administration. Recently, various strategies have been used to augment the transdermal delivery of bioactives. Mainly, they include iontophoresis, electrophoresis, sonophoresis, chemical permeation enhancers, micro needles, and vesicular system. Among these strategies elastic liposomes appear promising. Elastic liposomes possess an infrastructure consisting of hydrophobic and hydrophilic moieties together and as a result can accommodate drug molecules with wide range of solubility. It is an ultra deformable vesicle, elastic in nature which can squeeze itself through a pore which is many times smaller than its size owing to its elasticity. They can deform and pass through narrow constriction (from 5 to 10 times less than their own diameter without measurable loss. This high deformability gives better penetration of intact vesicles. This system is much more efficient at delivering a low and high molecular weight drug to the skin in terms of quantity and depth. The article speaks specifically on various phenomenon associated with the properties of these vesicles and their transport mechanisms. It also throws light on the effectiveness of conventional and deformable vesicles as drug delivery systems as well as their possible mode of action as transdermal drug carriers.

  2. MRI-Guided Focused Ultrasound as a New Method of Drug Delivery

    Directory of Open Access Journals (Sweden)

    M. Thanou

    2013-01-01

    Full Text Available Ultrasound-mediated drug delivery under the guidance of an imaging modality can improve drug disposition and achieve site-specific drug delivery. The term focal drug delivery has been introduced to describe the focal targeting of drugs in tissues with the help of imaging and focused ultrasound. Focal drug delivery aims to improve the therapeutic profile of drugs by improving their specificity and their permeation in defined areas. Focused-ultrasound- (FUS- mediated drug delivery has been applied with various molecules to improve their local distribution in tissues. FUS is applied with the aid of microbubbles to enhance the permeability of bioactive molecules across BBB and improve drug distribution in the brain. Recently, FUS has been utilised in combination with MRI-labelled liposomes that respond to temperature increase. This strategy aims to “activate” nanoparticles to release their cargo locally when triggered by hyperthermia induced by FUS. MRI-guided FUS drug delivery provides the opportunity to improve drug bioavailability locally and therefore improve the therapeutic profiles of drugs. This drug delivery strategy can be directly translated to clinic as MRg FUS is a promising clinically therapeutic approach. However, more basic research is required to understand the physiological mechanism of FUS-enhanced drug delivery.

  3. Dry powder platform for pulmonary drug delivery

    Institute of Scientific and Technical Information of China (English)

    Derek Ivan Daniher; Jesse Zhu

    2008-01-01

    The phenomenon of particle interaction involved in pulmonary drug delivery belongs to a wide variety of disciplines of particle technology, in particular, fluidization. This paper reviews the basic concepts of pulmonary drug delivery with references to fluidization research, in particular, studies on Geldart group C powders. Dry powder inhaler device-formulation combination has been shown to be an effective method for delivering drugs to the lung for treatment of asthma, chronic obstructive pulmonary disease and cystic fibrosis. Even with advanced designs, however, delivery efficiency is still poor mainly due to powder dispersion problems which cause poor lung deposition and high dose variability. Drug particles used in current inhalers must be 1-5 μm in diameter for effective deposition in small-diameter airways and alveoli. These powders are very cohesive, have poor flowability, and are difficult to disperse into aerosol due to cohesion arising from van tier Waals attraction. These problems are well known in fluidization research, much of which is highly relevant to pulmonary drug delivery.

  4. Liposomal drug delivery systems--clinical applications.

    Science.gov (United States)

    Goyal, Parveen; Goyal, Kumud; Vijaya Kumar, Sengodan Gurusamy; Singh, Ajit; Katare, Om Prakash; Mishra, Dina Nath

    2005-03-01

    Liposomes have been widely investigated since 1970 as drug carriers for improving the delivery of therapeutic agents to specific sites in the body. As a result, numerous improvements have been made, thus making this technology potentially useful for the treatment of certain diseases in the clinics. The success of liposomes as drug carriers has been reflected in a number of liposome-based formulations, which are commercially available or are currently undergoing clinical trials. The current pharmaceutical preparations of liposome-based therapeutic systems mainly result from our understanding of lipid-drug interactions and liposome disposition mechanisms. The insight gained from clinical use of liposome drug delivery systems can now be integrated to design liposomes that can be targeted on tissues, cells or intracellular compartments with or without expression of target recognition molecules on liposome membranes. This review is mainly focused on the diseases that have attracted most attention with respect to liposomal drug delivery and have therefore yielded most progress, namely cancer, antibacterial and antifungal disorders. In addition, increased gene transfer efficiencies could be obtained by appropriate selection of the gene transfer vector and mode of delivery.

  5. Dendrimer a versatile polymer in drug delivery

    Directory of Open Access Journals (Sweden)

    Singh Shakti

    2009-01-01

    Full Text Available Dendrimers are a unique class of synthetic macromolecules having highly branched, three-dimensional, nanoscale architecture with very low polydispersity and high functionality. Structural advantages allow dendrimers to play an important role in the fields of nanotechnology, pharmaceutical and medicinal chemistry. This review discusses several aspects of dendrimers, including preparation, dendrimer-drug coupling chemistry, structural models of dendrimer-based drug delivery systems, and physicochemical and toxicological properties. Dendrimers have emerged as one of the most interesting themes for researchers as a result of their unique architecture and macromolecular characteristics. Several groups are involved in exploring their potential as versatile carriers in drug delivery. The use of dendrimers in drug delivery has been reviewed extensively. The increasing relevance of the potential of dendrimers in drug delivery emphasizes the need to explore the routes by which they can be administered. The high level of control possible over the architectural design of dendrimers; their size, shape, branching length/density, and their surface functionality clearly distinguish these structures as unique and optimum carriers in those applications. The bioactive agents may be encapsulated into the interior of the dendrimers or chemically attached/physically adsorbed onto the dendrimer surface, with the option of tailoring the carrier to the specific needs of the active material and its therapeutic applications. This review clearly demonstrates the potential of this new fourth major class of polymer architecture and indeed substantiates the high hopes for the future of dendrimers.

  6. Transdermal Delivery of Drugs with Microneedles—Potential and Challenges

    Directory of Open Access Journals (Sweden)

    Kevin Ita

    2015-06-01

    Full Text Available Transdermal drug delivery offers a number of advantages including improved patient compliance, sustained release, avoidance of gastric irritation, as well as elimination of pre-systemic first-pass effect. However, only few medications can be delivered through the transdermal route in therapeutic amounts. Microneedles can be used to enhance transdermal drug delivery. In this review, different types of microneedles are described and their methods of fabrication highlighted. Microneedles can be fabricated in different forms: hollow, solid, and dissolving. There are also hydrogel-forming microneedles. A special attention is paid to hydrogel-forming microneedles. These are innovative microneedles which do not contain drugs but imbibe interstitial fluid to form continuous conduits between dermal microcirculation and an attached patch-type reservoir. Several microneedles approved by regulatory authorities for clinical use are also examined. The last part of this review discusses concerns and challenges regarding microneedle use.

  7. Transdermal Delivery of Drugs with Microneedles—Potential and Challenges

    Science.gov (United States)

    Ita, Kevin

    2015-01-01

    Transdermal drug delivery offers a number of advantages including improved patient compliance, sustained release, avoidance of gastric irritation, as well as elimination of pre-systemic first-pass effect. However, only few medications can be delivered through the transdermal route in therapeutic amounts. Microneedles can be used to enhance transdermal drug delivery. In this review, different types of microneedles are described and their methods of fabrication highlighted. Microneedles can be fabricated in different forms: hollow, solid, and dissolving. There are also hydrogel-forming microneedles. A special attention is paid to hydrogel-forming microneedles. These are innovative microneedles which do not contain drugs but imbibe interstitial fluid to form continuous conduits between dermal microcirculation and an attached patch-type reservoir. Several microneedles approved by regulatory authorities for clinical use are also examined. The last part of this review discusses concerns and challenges regarding microneedle use. PMID:26131647

  8. Drug delivery glucantime in PVP/chitosan membranes

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Maria J.A.; Lugao, Ademar B.; Parra, Duclerc F., E-mail: mariajhho@yahoo.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Amato, Valdir S. [Universidade de Sao Paulo (DMIP/FM/USP), Sao Paulo, SP (Brazil). Faculdade de Medicina. Departamento de Molestias Infecciosas e Parasitarias

    2015-07-01

    The current study of polymer science considers the area of biomedical application very important to establish developments in new polymeric materials. Examples of that are hydrogels for controlled release of drugs. In this work, hydrogels of poly (N-2-vinil-pyrrolidone) (PVP) containing chitosan and clay nanoparticles were obtained and characterized to investigate chitosan influence on Glucantime drug delivery. The matrixes were crosslinked by gamma irradiation process with doses of 25 kGy. Hydrogels morphologies were observed by X Ray diffraction (DRX). Atomic Force Microscopy (AFM) and swelling kinetic at 22 °C to study the capacity of water retention and, finally, drug delivery tests were performed 'in vitro'. The system showed higher gel fraction for the matrix with 1.0% of clay and 0.5% of chitosan. In this case, besides the interactions of clay ions with PVP, there are interactions of chitosan amine group with PVP amide group. (author)

  9. SYNTHESIS AND DRUG RELEASE OF CROSSLINKING POLYPHOSPHATES

    Institute of Scientific and Technical Information of China (English)

    LuoYi; ZhuoRenxi; 等

    1995-01-01

    A new class of crosslinking polyphosphates were synthesized and characterized by IR 1HNMR,31PNMR spectroscopy as well as elemental analysis.In vitro degradation of the polyphosphates obtained and the release of antineoplastic drug Methotrexate(MTX) and contraceptive Levonorgestrel(LNG) by using these polymers as matrix were studied.Zero order release rate was observed in the case of LNG release.

  10. Prodigiosin release from an implantable biomedical device: kinetics of localized cancer drug release

    Energy Technology Data Exchange (ETDEWEB)

    Danyuo, Y.; Obayemi, J.D.; Dozie-Nwachukwu, S. [Department of Materials Science and Engineering, African University of Science and Technology (AUST), Abuja, Federal Capital Territory (Nigeria); Ani, C.J. [Department of Theoretical Physics, African University of Science and Technology (AUST), Abuja, Federal Capital Territory (Nigeria); Odusanya, O.S. [Biotechnology and Genetic Engineering Advanced Laboratory, Sheda Science and Technology Complex (SHESTCO), Abuja, Federal Capital Territory (Nigeria); Oni, Y. [Department of Chemistry, Bronx Community College, New York, NY (United States); Anuku, N. [Department of Chemistry, Bronx Community College, New York, NY (United States); Princeton Institute for the Science and Technology of Materials (PRISM), 70 Prospect Street, Princeton, NJ 08544 (United States); Malatesta, K. [Department of Chemistry, Bronx Community College, New York, NY (United States); Soboyejo, W.O., E-mail: soboyejo@princeton.edu [Department of Materials Science and Engineering, African University of Science and Technology (AUST), Abuja, Federal Capital Territory (Nigeria); Princeton Institute for the Science and Technology of Materials (PRISM), 70 Prospect Street, Princeton, NJ 08544 (United States); Department of Mechanical and Aerospace Engineering 1 Olden Street, Princeton, NJ 08544 (United States)

    2014-09-01

    This paper presents an implantable encapsulated structure that can deliver localized heating (hyperthermia) and controlled concentrations of prodigiosin (a cancer drug) synthesized by bacteria (Serratia marcesce (subsp. marcescens)). Prototypical Poly-di-methyl-siloxane (PDMS) packages, containing well-controlled micro-channels and drug storage compartments, were fabricated along with a drug-storing polymer produced by free radical polymerization of Poly(N-isopropylacrylamide)(PNIPA) co-monomers of Acrylamide (AM) and Butyl-methacrylate (BMA). The mechanisms of drug diffusion of PNIPA-base gels were elucidated. Scanning Electron Microscopy (SEM) was also used to study the heterogeneous porous structure of the PNIPA-based gels. The release exponents, n, of the gels were found to between 0.5 and 0.7. This is in the range expected for Fickian (n = 0.5). Deviation from Fickian diffusion was also observed (n > 0.5) diffusion. The gel diffusion coefficients were shown to vary between 2.1 × 10{sup −12} m{sup 2}/s and 4.8 × 10{sup −6} m{sup 2}/s. The implications of the results are then discussed for the localized treatment of cancer via hyperthermia and the controlled delivery of prodigiosin from encapsulated PNIPA-based devices. - Highlights: • Fabricated thermo-sensitive hydrogels for localized drug release from an implantable biomedical device. • Determined the cancer drug diffusion mechanisms of PNIPA-co-AM copolymer hydrogel. • Encapsulated PNIPA-based hydrogels in PDMS capsules for controlled drug delivery. • Established the kinetics of drug release from gels and channels in an implantable biomedical device. • Demonstrated the potential for the controlled release of prodigiosin (PG) as an anticancer drug.

  11. An implantable thermoresponsive drug delivery system based on Peltier device.

    Science.gov (United States)

    Yang, Rongbing; Gorelov, Alexander V; Aldabbagh, Fawaz; Carroll, William M; Rochev, Yury

    2013-04-15

    Locally dropping the temperature in vivo is the main obstacle to the clinical use of a thermoresponsive drug delivery system. In this paper, a Peltier electronic element is incorporated with a thermoresponsive thin film based drug delivery system to form a new drug delivery device which can regulate the release of rhodamine B in a water environment at 37 °C. Various current signals are used to control the temperature of the cold side of the Peltier device and the volume of water on top of the Peltier device affects the change in temperature. The pulsatile on-demand release profile of the model drug is obtained by turning the current signal on and off. The work has shown that the 2600 mAh power source is enough to power this device for 1.3 h. Furthermore, the excessive heat will not cause thermal damage in the body as it will be dissipated by the thermoregulation of the human body. Therefore, this simple novel device can be implanted and should work well in vivo.

  12. Microneedles array with biodegradable tips for transdermal drug delivery

    Science.gov (United States)

    Iliescu, Ciprian; Chen, Bangtao; Wei, Jiashen; Tay, Francis E. H.

    2008-12-01

    The paper presented an enhancement solution for transdermal drug delivery using microneedles array with biodegradable tips. The microneedles array was fabricated by using deep reactive ion etching (DRIE) and the biodegradable tips were made to be porous by electrochemical etching process. The porous silicon microneedle tips can greatly enhance the transdermal drug delivery in a minimum invasion, painless, and convenient manner, at the same time; they are breakable and biodegradable. Basically, the main problem of the silicon microneedles consists of broken microneedles tips during the insertion. The solution proposed is to fabricate the microneedle tip from a biodegradable material - porous silicon. The silicon microneedles are fabricated using DRIE notching effect of reflected charges on mask. The process overcomes the difficulty in the undercut control of the tips during the classical isotropic silicon etching process. When the silicon tips were formed, the porous tips were then generated using a classical electrochemical anodization process in MeCN/HF/H2O solution. The paper presents the experimental results of in vitro release of calcein and BSA with animal skins using a microneedle array with biodegradable tips. Compared to the transdermal drug delivery without any enhancer, the microneedle array had presented significant enhancement of drug release.

  13. Crosslinked ionic polysaccharides for stimuli-sensitive drug delivery.

    Science.gov (United States)

    Alvarez-Lorenzo, Carmen; Blanco-Fernandez, Barbara; Puga, Ana M; Concheiro, Angel

    2013-08-01

    Polysaccharides are gaining increasing attention as components of stimuli-responsive drug delivery systems, particularly since they can be obtained in a well characterized and reproducible way from the natural sources. Ionic polysaccharides can be readily crosslinked to render hydrogel networks sensitive to a variety of internal and external variables, and thus suitable for switching drug release on-off through diverse mechanisms. Hybrids, composites and grafted polymers can reinforce the responsiveness and widen the range of stimuli to which polysaccharide-based systems can respond. This review analyzes the state of the art of crosslinked ionic polysaccharides as components of delivery systems that can regulate drug release as a function of changes in pH, ion nature and concentration, electric and magnetic field intensity, light wavelength, temperature, redox potential, and certain molecules (enzymes, illness markers, and so on). Examples of specific applications are provided. The information compiled demonstrates that crosslinked networks of ionic polysaccharides are suitable building blocks for developing advanced externally activated and feed-back modulated drug delivery systems. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. STRATEGIES AND PROSPECTS OF NASAL DRUG DELIVERY SYSTEMS

    OpenAIRE

    Gannu Praveen Kumar

    2012-01-01

    The recent advancement of nasal drug delivery systems has increased enormously and is gaining significant importance. Intranasal therapy has been an accepted form of treatment in the Ayurvedic system of Indian Medicine. The non-invasive delivery of nasal drug delivery systems made to exploit for the development of successful treatment. The advantages, disadvantages, mechanism of action and application of nasal drug delivery system in local delivery, systematic delivery, nasal vaccines and CNS...

  15. Drug delivery applications with ethosomes.

    Science.gov (United States)

    Ainbinder, D; Paolino, D; Fresta, M; Touitou, E

    2010-10-01

    Ethosomes are specially tailored vesicular carriers able to efficiently deliver various molecules with different physicochemical properties into deep skin layers and across the skin. This paper reviews the unique characteristics of the ethosomal carriers, focusing on work carried out with drug containing ethosomal systems in animal models and in clinical studies. The paper concludes with a discussion on the safety of the ethosomal system applications.

  16. Interfacial Fast Release Layer in Monodisperse Poly (lactic-co-glycolic acid) Microspheres Accelerates the Drug Release.

    Science.gov (United States)

    Wu, Jun; Zhao, Xiaoli; Yeung, Kelvin W K; To, Michael K T

    2016-01-01

    Understanding microstructural evolutions of drug delivery devices during drug release process is essential for revealing the drug release mechanisms and controlling the drug release profiles. In this study, monodisperse poly (lactic-co-glycolic acid) microspheres in different diameters were fabricated by microfluidics in order to find out the relationships between the microstructural evolutions and the drug release profiles. It was found that poly (lactic-co-glycolic acid) microspheres underwent significant size expansion which took place from the periphery to the center, resulting in the formation of interfacial fast release layers. At the same time, inner pores were created and the diffusion rate was increased so that the early stage drug release was accelerated. Due to the different expansion rates, small poly (lactic-co-glycolic acid) microspheres tendered to follow homogeneous drug release while large poly (lactic-co-glycolic acid) microspheres tendered to follow heterogeneous drug release. This study suggests that the size expansion and the occurrence of interfacial fast release layer were important mechanisms for early stage drug release of poly (lactic-co-glycolic acid) microspheres.

  17. MICRONEEDLES IN TRANSDERMAL DRUG DELIVERY: AN UNIQUE PAINLESS OPTION

    Directory of Open Access Journals (Sweden)

    Tiwari Raj Kumar

    2011-04-01

    Full Text Available The outermost layer of skin, the stratum corneum, has developed unnerving physical and immunological barrier properties that prevent infiltration of noxious chemicals and pathogens. Consequently, transdermal delivery of medicaments is currently restricted to a limited number of low molecular weight drugs to enter the skin at successful therapeutic rates. As a result, there has been significant recent interest in providing strategies that disrupt or dodge the principal physical barrier, the stratum corneum, for the efficient cutaneous delivery of macromolecular and nucleic acid based therapeutics. Recently, the use of micron-scale needles in increasing skin permeability has been proposed and shown to dramatically increase transdermal delivery, especially for macromolecules. Using the tools of the microelectronics industry, micro-needles have been fabricated with a wide range of sizes, shapes and materials. These strategies include: Micro-needles, Macroflux ®. A micro-needle-based drug delivery system is pain free administration, easy to use, discrete, continuous and controlled release system. This review compile the current advancement and literature regarding the fabricated micro-needles used for enhancing Transdermal Drug Delivery System and other structure based techniques.

  18. Noninvasive measurement of transdermal drug delivery by impedance spectroscopy

    Science.gov (United States)

    Arpaia, Pasquale; Cesaro, Umberto; Moccaldi, Nicola

    2017-01-01

    The effectiveness in transdermal delivery of skin permeation strategies (e.g., chemical enhancers, vesicular carrier systems, sonophoresis, iontophoresis, and electroporation) is poorly investigated outside of laboratory. In therapeutic application, the lack of recognized techniques for measuring the actually-released drug affects the scientific concept itself of dosage for topically- and transdermally-delivered drugs. Here we prove the suitability of impedance measurement for assessing the amount of drug penetrated into the skin after transdermal delivery. In particular, the measured amount of drug depends linearly on the impedance magnitude variation normalized to the pre-treated value. Three experimental campaigns, based on the electrical analysis of the biological tissue behavior due to the drug delivery, are reported: (i) laboratory emulation on eggplants, (ii) ex-vivo tests on pig ears, and finally (iii) in-vivo tests on human volunteers. Results point out that the amount of delivered drug can be assessed by reasonable metrological performance through a unique measurement of the impedance magnitude at one single frequency. In particular, in-vivo results point out sensitivity of 23 ml−1, repeatability of 0.3%, non-linearity of 3.3%, and accuracy of 5.7%. Finally, the measurement resolution of 0.20 ml is compatible with clinical administration standards. PMID:28338008

  19. Nanoengineered drug delivery systems for enhancing antibiotic therapy.

    Science.gov (United States)

    Kalhapure, Rahul S; Suleman, Nadia; Mocktar, Chunderika; Seedat, Nasreen; Govender, Thirumala

    2015-03-01

    Formulation scientists are recognizing nanoengineered drug delivery systems as an effective strategy to overcome limitations associated with antibiotic drug therapy. Antibiotics encapsulated into nanodelivery systems will contribute to improved management of patients with various infectious diseases and to overcoming the serious global burden of antibiotic resistance. An extensive review of several antibiotic-loaded nanocarriers that have been formulated to target drugs to infectious sites, achieve controlled drug release profiles, and address formulation challenges, such as low-drug entrapment efficiencies, poor solubility and stability is presented in this paper. The physicochemical properties and the in vitro/in vivo performances of various antibiotic-loaded delivery systems, such as polymeric nanoparticles, micelles, dendrimers, liposomes, solid lipid nanoparticles, lipid-polymer hybrid nanoparticles, nanohybirds, nanofibers/scaffolds, nanosheets, nanoplexes, and nanotubes/horn/rods and nanoemulsions, are highlighted and evaluated. Future studies that will be essential to optimize formulation and commercialization of these antibiotic-loaded nanosystems are also identified. The review presented emphasizes the significant formulation progress achieved and potential that novel nanoengineered antibiotic drug delivery systems have for enhancing the treatment of patients with a range of infections.

  20. Processing of Polymer Nanofibers Through Electrospinning as Drug Delivery Systems

    Science.gov (United States)

    Kenawy, E.; Abdel-Hay, F. I.; El-Newehy, M. H.; Wnek, G. E.

    The use of electrospun fibers as drug carriers could be promising in the future for biomedical applications, especially postoperative local chemotherapy. In this research, electrospun fibers were developed as a new system for the delivery of ketoprofen as non-steroidal anti-inflammatory drug (NSAID). The fibers were made either from polycaprolactone (PCL) as a biodegradable polymer or polyurethane (PU) as a non-biodegradable polymer, or from the blends of the two. The release of the ketoprofen was followed by UV—VIS spectroscopy in phosphate buffer of pH 7.4 at 37°C and 20°C. The results showed that the release rates from the polycaprolactone, polyurethane and their blend were similar. However, the blend of the polycaprolactone with polyurethane improved its visual mechanical properties. Release profiles from the electrospun mats were compared to cast films of the various formulations.

  1. Stimuli-responsive hydrogels in drug delivery and tissue engineering.

    Science.gov (United States)

    Sood, Nikhil; Bhardwaj, Ankur; Mehta, Shuchi; Mehta, Abhinav

    2016-01-01

    Hydrogels are the three-dimensional network structures obtained from a class of synthetic or natural polymers which can absorb and retain a significant amount of water. Hydrogels are one of the most studied classes of polymer-based controlled drug release. These have attracted considerable attention in biochemical and biomedical fields because of their characteristics, such as swelling in aqueous medium, biocompatibility, pH and temperature sensitivity or sensitivity towards other stimuli, which can be utilized for their controlled zero-order release. The hydrogels are expected to explore new generation of self-regulated delivery system having a wide array of desirable properties. This review highlights the exciting opportunities and challenges in the area of hydrogels. Here, we review different literatures on stimuli-sensitive hydrogels, such as role of temperature, electric potential, pH and ionic strength to control the release of drug from hydrogels.

  2. Design and optimization of floating drug delivery system of acyclovir

    Directory of Open Access Journals (Sweden)

    Kharia A

    2010-01-01

    Full Text Available The purpose of the present work was to design and optimize floating drug delivery systems of acyclovir using psyllium husk and hydroxypropylmethylcellulose K4M as the polymers and sodium bicarbonate as a gas generating agent. The tablets were prepared by wet granulation method. A 32 full factorial design was used for optimization of drug release profile. The amount of psyllium husk (X1 and hydroxypropylmethylcellulose K4M (X2 were selected as independent variables. The times required for 50% (t 50% and 70% (t 70% drug dissolution were selected as dependent variables. All the designed nine batches of formulations were evaluated for hardness, friability, weight variation, drug content uniformity, swelling index, in vitro buoyancy, and in vitro drug release profile. All formulations had floating lag time below 3 min and constantly floated on dissolution medium for more than 24 h. Validity of the developed polynomial equation was verified by designing two check point formulations (C1 and C2. The closeness of predicted and observed values for t 50% and t 70% indicates validity of derived equations for the dependent variables. These studies indicated that the proper balance between psyllium husk and hydroxypropylmethylcellulose K4M can produce a drug dissolution profile similar to the predicted dissolution profile. The optimized formulations followed Higuchi′s kinetics while the drug release mechanism was found to be anomalous type, controlled by diffusion through the swollen matrix.

  3. Polyelectrolyte microcapsules for sustained delivery of water-soluble drugs

    Energy Technology Data Exchange (ETDEWEB)

    Anandhakumar, S.; Debapriya, M. [Department of Materials Engineering, Indian Institute of Science, Bangalore, 560012 (India); Nagaraja, V. [Department of Microbiology and Cell Biology, Indian Institute of Science, Bangalore, 560012 (India); Raichur, Ashok M., E-mail: amr@materials.iisc.ernet.in [Department of Materials Engineering, Indian Institute of Science, Bangalore, 560012 (India)

    2011-03-12

    Polyelectrolyte capsules composed of weak polyelectrolytes are introduced as a simple and efficient system for spontaneous encapsulation of low molecular weight water-soluble drugs. Polyelectrolyte capsules were prepared by layer-by-layer (LbL) assembling of weak polyelectrolytes, poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) on polystyrene sulfonate (PSS) doped CaCO{sub 3} particles followed by core removal with ethylene-diaminetetraacetic acid (EDTA). The loading process was observed by confocal