Standards for Educational Public Relations and Communications Professionals.

Science.gov (United States)

Chappelow, Marsha A.

2003-01-01

Describes National School Public Relations Association standards for school public relations and communications professionals and program. Includes reactions and comments about new Association standards from seven superintendents and four school public-relations professionals. (PKP)

Derivation of Einstein-Cartan theory from general relativity

Science.gov (United States)

Petti, Richard

2015-04-01

General relativity cannot describe exchange of classical intrinsic angular momentum and orbital angular momentum. Einstein-Cartan theory fixes this problem in the least invasive way. In the late 20th century, the consensus view was that Einstein-Cartan theory requires inclusion of torsion without adequate justification, it has no empirical support (though it doesn't conflict with any known evidence), it solves no important problem, and it complicates gravitational theory with no compensating benefit. In 1986 the author published a derivation of Einstein-Cartan theory from general relativity, with no additional assumptions or parameters. Starting without torsion, Poincaré symmetry, classical or quantum spin, or spinors, it derives torsion and its relation to spin from a continuum limit of general relativistic solutions. The present work makes the case that this computation, combined with supporting arguments, constitutes a derivation of Einstein-Cartan theory from general relativity, not just a plausibility argument. This paper adds more and simpler explanations, more computational details, correction of a factor of 2, discussion of limitations of the derivation, and discussion of some areas of gravitational research where Einstein-Cartan theory is relevant.

17 CFR 155.6 - Trading standards for the transaction of business on registered derivatives transaction execution...

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Trading standards for the transaction of business on registered derivatives transaction execution facilities. 155.6 Section 155.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION TRADING STANDARDS § 155.6 Trading...

17 CFR 39.5 - Information relating to derivatives clearing organization operations.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Information relating to derivatives clearing organization operations. 39.5 Section 39.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES CLEARING ORGANIZATIONS § 39.5 Information relating to derivatives...

The role of a German multi-stakeholder standard for livestock products derived from non-GMO feed

NARCIS (Netherlands)

Venus, Thomas J.; Drabik, Dusan; Wesseler, Justus

2018-01-01

In Germany, products derived from livestock who were fed GMO are not required to be labeled as GMO. However, non-GMO labeling requires compliance with the national public non-GMO production standard, including a confirmation that no GM feed was used. In addition to the national standard, firms can

The density-salinity relation of standard seawater

Science.gov (United States)

Schmidt, Hannes; Seitz, Steffen; Hassel, Egon; Wolf, Henning

2018-01-01

The determination of salinity by means of electrical conductivity relies on stable salt proportions in the North Atlantic Ocean, because standard seawater, which is required for salinometer calibration, is produced from water of the North Atlantic. To verify the long-term stability of the standard seawater composition, it was proposed to perform measurements of the standard seawater density. Since the density is sensitive to all salt components, a density measurement can detect any change in the composition. A conversion of the density values to salinity can be performed by means of a density-salinity relation. To use such a relation with a target uncertainty in salinity comparable to that in salinity obtained from conductivity measurements, a density measurement with an uncertainty of 2 g m-3 is mandatory. We present a new density-salinity relation based on such accurate density measurements. The substitution measurement method used is described and density corrections for uniform isotopic and chemical compositions are reported. The comparison of densities calculated using the new relation with those calculated using the present reference equations of state TEOS-10 suggests that the density accuracy of TEOS-10 (as well as that of EOS-80) has been overestimated, as the accuracy of some of its underlying density measurements had been overestimated. The new density-salinity relation may be used to verify the stable composition of standard seawater by means of routine density measurements.

Development and UFLC-MS/MS Characterization of a Product-Specific Standard for Phenolic Quantification of Maple-Derived Foods.

Science.gov (United States)

Liu, Yongqiang; Ma, Hang; Seeram, Navindra P

2016-05-04

The phenolic contents of plant foods are commonly quantified by the Folin-Ciocalteu assay based on gallic acid equivalents (GAEs). However, this may lead to inaccuracies because gallic acid is not always representative of the structural heterogeneity of plant phenolics. Therefore, product-specific standards have been developed for the phenolic quantification of several foods. Currently, maple-derived foods (syrup, sugar, sap/water, and extracts) are quantified for phenolic contents based on GAEs. Because lignans are the predominant phenolics present in maple, herein, a maple phenolic lignan-enriched standard (MaPLES) was purified (by chromatography) and characterized (by UFLC-MS/MS with lignans previously isolated from maple syrup). Using MaPLES and secoisolariciresinol (a commercially available lignan), the phenolic contents of the maple-derived foods increased 3-fold compared to GAEs. Therefore, lignan-based standards are more appropriate for phenolic quantification of maple-derived foods versus GAEs. Also, MaPLES can be utilized for the authentication and detection of fake label claims on maple products.

Penetratin and derivatives acting as antifungal agents

NARCIS (Netherlands)

Masman, Marcelo F.; Rodriguez, Ana M.; Raimondi, Marcela; Zacchino, Susana A.; Luiten, Paul G. M.; Somlai, Csaba; Kortvelyesi, Tamas; Penke, Botond; Enriz, Ricardo D.

The synthesis, in vitro evaluation, and conformational study of RQIKTWFQNRRMKWKK-NH(2) (penetratin) and related derivatives acting as antifungal agents are reported. Penetratin and some of its derivatives displayed antifungal activity against the human opportunistic pathogenic standardized ATCC

Relations between elliptic multiple zeta values and a special derivation algebra

International Nuclear Information System (INIS)

Broedel, Johannes; Matthes, Nils; Schlotterer, Oliver

2016-01-01

We investigate relations between elliptic multiple zeta values (eMZVs) and describe a method to derive the number of indecomposable elements of given weight and length. Our method is based on representing eMZVs as iterated integrals over Eisenstein series and exploiting the connection with a special derivation algebra. Its commutator relations give rise to constraints on the iterated integrals over Eisenstein series relevant for eMZVs and thereby allow to count the indecomposable representatives. Conversely, the above connection suggests apparently new relations in the derivation algebra. Under https://tools.aei.mpg.de/emzv we provide relations for eMZVs over a wide range of weights and lengths. (paper)

Experimental study on the thermochemistry of some amino derivatives of uracil

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Amaral, Luisa M.P.F.; Szterner, Piotr

2011-01-01

Highlights: → Combustion calorimetry was used to determine Δ f H m 0 (cr) of amino derivatives of uracil. → Gas-phase Δ f H m 0 of amino derivatives of uracil have been derived. → The relative enthalpic stability of the title compounds is discussed in structural terms. - Abstract: Values of the standard (p 0 = 0.1 MPa) molar enthalpy of combustion, Δ c H m 0 , of four crystalline compounds: 5-aminouracil, 6-aminouracil, 6-amino-1-methyluracil, and 6-amino-1,3-dimethyluracil, were determined, at T = 298.15 K, using a static bomb combustion calorimeter. The values obtained of standard molar enthalpy of combustion were used to derive the standard molar enthalpy of formation of the compounds investigated in their condensed phase and together with literature values of the standard molar enthalpy of sublimation, yielded the standard molar enthalpies of formation in the gaseous phase. These are discussed in terms of the effects of the molecular structure on the relative enthalpic stability.

Development of Derivatives Reporting

OpenAIRE

Pejčochová, Kristina

2012-01-01

This thesis aims to summarise the theoretical principles, concepts and considerations pertaining to accounting for and reporting of derivatives and to describe and analyse the development of major accounting standards dealing with related issues. Sections 1 and 2 provide a basic overview of derivative instruments'categorisation, mechanics, valuation and uses. Section 3 studies the principles that ensure the provision of useful financial information, with specific focus on financial instrument...

On the validity and practical applicability of derivative analyticity relations

International Nuclear Information System (INIS)

Kolar, P.; Fischer, J.

1983-09-01

We examine derivative analyticity relations (DAR), which were originally proposed by Bronzan as an alternative to dispersion relations and in which the dispersion integral is replaced by a tangent series of derivatives. We characterize the class of functions satisfying DAR, and show that outside this class the dispersion integral represents a Borel-like sum of tangent series. We point out difficulties connected with the application of DAR. (author)

Comparisons of ANSI standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANSI standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-10-01

This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Systematic derivation of an Australian standard for Tall Man lettering to distinguish similar drug names.

Science.gov (United States)

Emmerton, Lynne; Rizk, Mariam F S; Bedford, Graham; Lalor, Daniel

2015-02-01

Confusion between similar drug names can cause harmful medication errors. Similar drug names can be visually differentiated using a typographical technique known as Tall Man lettering. While international conventions exist to derive Tall Man representation for drug names, there has been no national standard developed in Australia. This paper describes the derivation of a risk-based, standardized approach for use of Tall Man lettering in Australia, and known as National Tall Man Lettering. A three-stage approach was applied. An Australian list of similar drug names was systematically compiled from the literature and clinical error reports. Secondly, drug name pairs were prioritized using a risk matrix based on the likelihood of name confusion (a four-component score) vs. consensus ratings of the potential severity of the confusion by 31 expert reviewers. The mid-type Tall Man convention was then applied to derive the typography for the highest priority drug pair names. Of 250 pairs of confusable Australian drug names, comprising 341 discrete names, 35 pairs were identified by the matrix as an 'extreme' risk if confused. The mid-type Tall Man convention was successfully applied to the majority of the prioritized drugs; some adaption of the convention was required. This systematic process for identification of confusable drug names and associated risk, followed by application of a convention for Tall Man lettering, has produced a standard now endorsed for use in clinical settings in Australia. Periodic updating is recommended to accommodate new drug names and error reports. © 2014 John Wiley & Sons, Ltd.

Surface soil contamination standards

International Nuclear Information System (INIS)

Boothe, G.F.

1979-01-01

The purpose of this document is to define surface soil contamination limits for radioactive materials below which posting, restrictions and environmental controls are not necessary in order to protect personnel and the environment. The standards can also be used to determine if solid waste or other material is contaminated relative to disposal requirements. The derivation of the standards is given

Low-derivative operators of the Standard Model effective field theory via Hilbert series methods

Energy Technology Data Exchange (ETDEWEB)

Lehman, Landon; Martin, Adam [Department of Physics, University of Notre Dame,Nieuwland Science Hall, Notre Dame, IN 46556 (United States)

2016-02-12

In this work, we explore an extension of Hilbert series techniques to count operators that include derivatives. For sufficiently low-derivative operators, we conjecture an algorithm that gives the number of invariant operators, properly accounting for redundancies due to the equations of motion and integration by parts. Specifically, the conjectured technique can be applied whenever there is only one Lorentz invariant for a given partitioning of derivatives among the fields. At higher numbers of derivatives, equation of motion redundancies can be removed, but the increased number of Lorentz contractions spoils the subtraction of integration by parts redundancies. While restricted, this technique is sufficient to automatically recreate the complete set of invariant operators of the Standard Model effective field theory for dimensions 6 and 7 (for arbitrary numbers of flavors). At dimension 8, the algorithm does not automatically generate the complete operator set; however, it suffices for all but five classes of operators. For these remaining classes, there is a well defined procedure to manually determine the number of invariants. Assuming our method is correct, we derive a set of 535 dimension-8 N{sub f}=1 operators.

Low-derivative operators of the Standard Model effective field theory via Hilbert series methods

International Nuclear Information System (INIS)

Lehman, Landon; Martin, Adam

2016-01-01

In this work, we explore an extension of Hilbert series techniques to count operators that include derivatives. For sufficiently low-derivative operators, we conjecture an algorithm that gives the number of invariant operators, properly accounting for redundancies due to the equations of motion and integration by parts. Specifically, the conjectured technique can be applied whenever there is only one Lorentz invariant for a given partitioning of derivatives among the fields. At higher numbers of derivatives, equation of motion redundancies can be removed, but the increased number of Lorentz contractions spoils the subtraction of integration by parts redundancies. While restricted, this technique is sufficient to automatically recreate the complete set of invariant operators of the Standard Model effective field theory for dimensions 6 and 7 (for arbitrary numbers of flavors). At dimension 8, the algorithm does not automatically generate the complete operator set; however, it suffices for all but five classes of operators. For these remaining classes, there is a well defined procedure to manually determine the number of invariants. Assuming our method is correct, we derive a set of 535 dimension-8 N_f=1 operators.

Derived more-less relational mands in children diagnosed with autism.

LENUS (Irish Health Repository)

Murphy, Carol

2009-01-01

In Experiment 1, more and less relations were trained for arbitrary Stimuli A1 and A2 with 3 children with autism. The following conditional discriminations were then trained: A1-B1, A2-B2, B1-C1, B2-C2. In subsequent tests, participants showed derived more-less mands (mand with C1 for more and mand with C2 for less). A training procedure reversed the B-C conditional discriminations, and participants then showed derived reversed more-less mands (mand with C1 for less, C2 for more). Baseline B-C relations were retrained, and participants subsequently demonstrated a return to the original derived manding. A second experiment with 1 prior participant and 1 naive participant removed a possible confounding effect. Establishing derived manding may be an advantageous component when teaching a mand repertoire in applied settings.

Deriving causes of child mortality by re–analyzing national verbal autopsy data applying a standardized computer algorithm in Uganda, Rwanda and Ghana

Directory of Open Access Journals (Sweden)

Li Liu

2015-06-01

Full Text Available Background To accelerate progress toward the Millennium Development Goal 4, reliable information on causes of child mortality is critical. With more national verbal autopsy (VA studies becoming available, how to improve consistency of national VA derived child causes of death should be considered for the purpose of global comparison. We aimed to adapt a standardized computer algorithm to re–analyze national child VA studies conducted in Uganda, Rwanda and Ghana recently, and compare our results with those derived from physician review to explore issues surrounding the application of the standardized algorithm in place of physician review. Methods and Findings We adapted the standardized computer algorithm considering the disease profile in Uganda, Rwanda and Ghana. We then derived cause–specific mortality fractions applying the adapted algorithm and compared the results with those ascertained by physician review by examining the individual– and population–level agreement. Our results showed that the leading causes of child mortality in Uganda, Rwanda and Ghana were pneumonia (16.5–21.1% and malaria (16.8–25.6% among children below five years and intrapartum–related complications (6.4–10.7% and preterm birth complications (4.5–6.3% among neonates. The individual level agreement was poor to substantial across causes (kappa statistics: –0.03 to 0.83, with moderate to substantial agreement observed for injury, congenital malformation, preterm birth complications, malaria and measles. At the population level, despite fairly different cause–specific mortality fractions, the ranking of the leading causes was largely similar. Conclusions The standardized computer algorithm produced internally consistent distribution of causes of child mortality. The results were also qualitatively comparable to those based on physician review from the perspective of public health policy. The standardized computer algorithm has the advantage of

Derivation of special relativity from Maxwell and Newton.

Science.gov (United States)

Dunstan, D J

2008-05-28

Special relativity derives directly from the principle of relativity and from Newton's laws of motion with a single undetermined parameter, which is found from Faraday's and Ampère's experimental work and from Maxwell's own introduction of the displacement current to be the -c(-2) term in the Lorentz transformations. The axiom of the constancy of the speed of light is quite unnecessary. The behaviour and the mechanism of the propagation of light are not at the foundations of special relativity.

Structure-charge mobility relation for hexabenzocoronene derivatives

Energy Technology Data Exchange (ETDEWEB)

Kirkpatrick, James [Max Planck Institute for Polymer Research, Ackermannweg 10, Mainz 55128 (Germany); Department of Physics, Imperial College London, Prince Consort Road, London SW7 2BW (United Kingdom); Marcon, Valentina; Kremer, Kurt [Max Planck Institute for Polymer Research, Ackermannweg 10, Mainz 55128 (Germany); Nelson, Jenny [Department of Physics, Imperial College London, Prince Consort Road, London SW7 2BW (United Kingdom); Andrienko, Denis

2008-05-15

Charge mobilities of several derivatives of discotic liquid crystals have been determined by combining three methods into one scheme: (i) quantum chemical methods for the calculation of molecular electronic structures and reorganization energies (ii) molecular dynamics for simulation of the relative positions and orientations of molecules in a columnar mesophase, and (iii) kinetic Monte Carlo simulations and Master Equation approach to simulate charge transport. Applying this scheme to differently substituted hexabenzocoronene derivatives we reproduce the trends and magnitudes of mobilities as measured by pulse-radiolysis time-resolved microwave conductivity (PR-TRMC) and connect mobility directly to the microscopic morphology of the columns. Our study also shows that it is possible to understand and reproduce experimental charge transport parameters, and, in some cases, accurately predict them. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

The Syntactic Derivations of Split Antecedent Relative Clause Constructions

Directory of Open Access Journals (Sweden)

Niina Ning Zhang

2007-06-01

Full Text Available In this paper, I propose a syntactic derivation for Split Antecedent Relative Clause Constructions such as Mary met a man and John met a woman who knew each other well. I claim that the two antecedents of such a construction are originally two conjuncts of a coordinate nominal. Then each has undergone a sideward movement, landed in a new working site, and been selected by a verb. After that, a coordinate clausal complex is constructed. In the old working site, a complex nominal is also constructed, in which the relative clause takes the remnant coordinate nominal as its antecedent. Finally, the complex nominal adjoins to the coordinate clausal complex. This analysis shows how the freedom in the selection of the landing site gained from sideward movement makes the syntactic derivations of this special type of relative clause construction possible, while at the same time avoiding the problems of the alternative three-dimensional analysis.

PERIOD-LUMINOSITY RELATIONS DERIVED FROM THE OGLE-III FUNDAMENTAL MODE CEPHEIDS

International Nuclear Information System (INIS)

Ngeow, Chow-Choong; Kanbur, Shashi M.; Neilson, Hilding R.; Nanthakumar, A.; Buonaccorsi, John

2009-01-01

In this paper, we have derived Cepheid period-luminosity (P-L) relations for the Large Magellanic Cloud (LMC) fundamental mode Cepheids, based on the data released from OGLE-III. We have applied an extinction map to correct for the extinction of these Cepheids. In addition to the VIW-band P-L relations, we also include JHK and four Spitzer IRAC-band P-L relations, derived by matching the OGLE-III Cepheids to the Two Micron All Sky Survey and SAGE data sets, respectively. We also test the nonlinearity of the Cepheid P-L relations based on extinction-corrected data. Our results (again) show that the LMC P-L relations are nonlinear in VIJH bands and linear in KW and the four IRAC bands, respectively.

Computer-related standards for the petroleum industry

International Nuclear Information System (INIS)

Winczewski, L.M.

1992-01-01

Rapid application of the computer to all areas of the petroleum industry is straining the capabilities of corporations and vendors to efficiently integrate computer tools into the work environment. Barriers to this integration arose form decades of competitive development of proprietary applications formats, along with compilation of data bases in isolation. Rapidly emerging industry-wide standards relating to computer applications and data management are poised to topple these barriers. This paper identifies the most active players within a rapidly evolving group of cooperative standardization activities sponsored by the petroleum industry. Summarized are their objectives, achievements, current activities and relationships to each other. The trends of these activities are assessed and projected

A Conceptual Derivation of Einstein's Postulates of Special Relativity.

Science.gov (United States)

Bearden, Thomas E.

This document presents a discussion and conceptual derivation of Einstein's postulates of special relativity. The perceptron approach appears to be a fundamentally new manner of regarding physical phenomena and it is hoped that physicists will interest themselves in the concept. (Author)

Simplified propagation of standard uncertainties

International Nuclear Information System (INIS)

Shull, A.H.

1997-01-01

An essential part of any measurement control program is adequate knowledge of the uncertainties of the measurement system standards. Only with an estimate of the standards'' uncertainties can one determine if the standard is adequate for its intended use or can one calculate the total uncertainty of the measurement process. Purchased standards usually have estimates of uncertainty on their certificates. However, when standards are prepared and characterized by a laboratory, variance propagation is required to estimate the uncertainty of the standard. Traditional variance propagation typically involves tedious use of partial derivatives, unfriendly software and the availability of statistical expertise. As a result, the uncertainty of prepared standards is often not determined or determined incorrectly. For situations meeting stated assumptions, easier shortcut methods of estimation are now available which eliminate the need for partial derivatives and require only a spreadsheet or calculator. A system of simplifying the calculations by dividing into subgroups of absolute and relative uncertainties is utilized. These methods also incorporate the International Standards Organization (ISO) concepts for combining systematic and random uncertainties as published in their Guide to the Expression of Measurement Uncertainty. Details of the simplified methods and examples of their use are included in the paper

A relation between the Barbero-Immirzi parameter and the standard model

Energy Technology Data Exchange (ETDEWEB)

Broda, Boguslaw, E-mail: bobroda@uni.lodz.p [Department of Theoretical Physics, University of Lodz, Pomorska 149/153, PL-90-236 Lodz (Poland); Szanecki, Michal, E-mail: michalszanecki@wp.p [Department of Theoretical Physics, University of Lodz, Pomorska 149/153, PL-90-236 Lodz (Poland)

2010-06-07

It has been shown that Sakharov's induced, from the fields entering the standard model, Barbero-Immirzi parameter {gamma} assumes, in the framework of Euclidean formalism, the UV cutoff-independent value, 1/9. The calculus uses the Schwinger's proper-time formalism, the Seeley-DeWitt heat-kernel expansion, and it is akin to the derivation of the ABJ chiral anomaly in space-time with torsion.

Neural correlates of derived relational responding on tests of stimulus equivalence

Directory of Open Access Journals (Sweden)

Cataldo Michael F

2008-02-01

Full Text Available Abstract Background An essential component of cognition and language involves the formation of new conditional relations between stimuli based upon prior experiences. Results of investigations on transitive inference (TI highlight a prominent role for the medial temporal lobe in maintaining associative relations among sequentially arranged stimuli (A > B > C > D > E. In this investigation, medial temporal lobe activity was assessed while subjects completed "Stimulus Equivalence" (SE tests that required deriving conditional relations among stimuli within a class (A ≡ B ≡ C. Methods Stimuli consisted of six consonant-vowel-consonant triads divided into two classes (A1, B1, C1; A2, B2, C2. A simultaneous matching-to-sample task and differential reinforcement were employed during pretraining to establish the conditional relations A1:B1 and B1:C1 in class 1 and A2:B2 and B2:C2 in class 2. During functional neuroimaging, recombined stimulus pairs were presented and subjects judged (yes/no whether stimuli were related. SE tests involved presenting three different types of within-class pairs: Symmetrical (B1 A1; C1 B1; B2 A2; C2 B2, and Transitive (A1 C1; A2 C2 and Equivalence (C1 A1; C2 A2 relations separated by a nodal stimulus. Cross-class 'Foils' consisting of unrelated stimuli (e.g., A1 C2 were also presented. Results Relative to cross-class Foils, Transitive and Equivalence relations requiring inferential judgments elicited bilateral activation in the anterior hippocampus while Symmetrical relations elicited activation in the parahippocampus. Relative to each derived relation, Foils generally elicited bilateral activation in the parahippocampus, as well as in frontal and parietal lobe regions. Conclusion Activation observed in the hippocampus to nodal-dependent derived conditional relations (Transitive and Equivalence relations highlights its involvement in maintaining relational structure and flexible memory expression among stimuli within a

Relations between the technological standards and technological appropriation

Directory of Open Access Journals (Sweden)

Carlos Alberto PRADO GUERRERO

2010-06-01

Full Text Available The objective of this study is to analyze the educational practices of using Blackboard in blended learning environments with students of higher education to understand the relationship between technological appropriation and standards of educational technology. To achieve that goal, the following research question was raised: ¿To what extent are the standards of education technology with the appropriation of technology in blended learning environments in higher educa­tion related? The contextual framework of this work includes the following topics: the institution, teaching, teachers and students. The design methodology that was used is of a correlation type. Correlations were carried out to determine the frequency and level in the technological standards as well as the appropriation of technology. In the comparison of the results obtained by the students, the teachers and the platform; we found that students in the school study showed a high degree of technology ownership and this was the same for the performance shown on the technological standards. It was established that teachers play a key role in developing the techno­logical appropriation of students and performance in technology standards.

Reciprocity relations in transmission electron microscopy: A rigorous derivation.

Science.gov (United States)

Krause, Florian F; Rosenauer, Andreas

2017-01-01

A concise derivation of the principle of reciprocity applied to realistic transmission electron microscopy setups is presented making use of the multislice formalism. The equivalence of images acquired in conventional and scanning mode is thereby rigorously shown. The conditions for the applicability of the found reciprocity relations is discussed. Furthermore the positions of apertures in relation to the corresponding lenses are considered, a subject which scarcely has been addressed in previous publications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Generation of retinal pigmented epithelium from iPSCs derived from the conjunctiva of donors with and without age related macular degeneration.

Directory of Open Access Journals (Sweden)

Zhouhui Geng

Full Text Available Fidelity in pluripotent stem cell differentiation protocols is necessary for the therapeutic and commercial use of cells derived from embryonic and induced pluripotent stem cells. Recent advances in stem cell technology, especially the widespread availability of a range of chemically defined media, substrates and differentiation components, now allow the design and implementation of fully defined derivation and differentiation protocols intended for replication across multiple research and manufacturing locations. In this report we present an application of these criteria to the generation of retinal pigmented epithelium from iPSCs derived from the conjunctiva of donors with and without age related macular degeneration. Primary conjunctival cells from human donors aged 70-85 years were reprogrammed to derive multiple iPSC lines that were differentiated into functional RPE using a rapid and defined differentiation protocol. The combination of defined iPSC derivation and culture with a defined RPE differentiation protocol, reproducibly generated functional RPE from each donor without requiring protocol adjustments for each individual. This successful validation of a standardized, iPSC derivation and RPE differentiation process demonstrates a practical approach for applications requiring the cost-effective generation of RPE from multiple individuals such as drug testing, population studies or for therapies requiring patient-specific RPE derivations. In addition, conjunctival cells are identified as a practical source of somatic cells for deriving iPSCs from elderly individuals.

Comparisons of ANS, ASME, AWS, and NFPA standards cited in the NRC standard review plan, NUREG-0800, and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANS, ASME, AWS and NFPA standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Quantifying relative importance: Computing standardized effects in models with binary outcomes

Science.gov (United States)

Grace, James B.; Johnson, Darren; Lefcheck, Jonathan S.; Byrnes, Jarrett E.K.

2018-01-01

Scientists commonly ask questions about the relative importances of processes, and then turn to statistical models for answers. Standardized coefficients are typically used in such situations, with the goal being to compare effects on a common scale. Traditional approaches to obtaining standardized coefficients were developed with idealized Gaussian variables in mind. When responses are binary, complications arise that impact standardization methods. In this paper, we review, evaluate, and propose new methods for standardizing coefficients from models that contain binary outcomes. We first consider the interpretability of unstandardized coefficients and then examine two main approaches to standardization. One approach, which we refer to as the Latent-Theoretical or LT method, assumes that underlying binary observations there exists a latent, continuous propensity linearly related to the coefficients. A second approach, which we refer to as the Observed-Empirical or OE method, assumes responses are purely discrete and estimates error variance empirically via reference to a classical R2 estimator. We also evaluate the standard formula for calculating standardized coefficients based on standard deviations. Criticisms of this practice have been persistent, leading us to propose an alternative formula that is based on user-defined “relevant ranges”. Finally, we implement all of the above in an open-source package for the statistical software R.

Vaginismus and dyspareunia: relationship with general and sex-related moral standards.

Science.gov (United States)

Borg, Charmaine; de Jong, Peter J; Weijmar Schultz, Willibrord

2011-01-01

Relatively strong adherence to conservative values and/or relatively strict sex-related moral standards logically restricts the sexual repertoire and will lower the threshold for experiencing negative emotions in a sexual context. In turn, this may generate withdrawal and avoidance behavior, which is at the nucleus of vaginismus. To examine whether indeed strong adherence to conservative morals and/or strict sexual standards may be involved in vaginismus. The Schwartz Value Survey (SVS) to investigate the individual's value pattern and the Sexual Disgust Questionnaire (SDQ) to index the willingness to perform certain sexual activities as an indirect measure of sex-related moral standards. The SVS and SDQ were completed by three groups: women diagnosed with vaginismus (N=24), a group of women diagnosed with dyspareunia (N=24), and a healthy control group of women without sexual complaints (N=32). Specifically, the vaginismus group showed relatively low scores on liberal values together with comparatively high scores on conservative values. Additionally, the vaginismus group was more restricted in their readiness to perform particular sex-related behaviors than the control group. The dyspareunia group, on both the SVS and the SDQ, placed between the vaginismus and the control group, but not significantly different than either of the groups. The findings are consistent with the view that low liberal and high conservative values, along with restricted sexual standards, are involved in the development/maintenance of vaginismus. © 2010 International Society for Sexual Medicine.

Dosimetry requirements derived from the sterilization standards

DEFF Research Database (Denmark)

Miller, A.

1998-01-01

The main standards for radiation sterilization, ISO 11137 and EN 552, rest the documentation for the properly executed sterilization process on dosimetry. Both standards describe general requirements to the dosimetry system: The dose measurements must be traceable to national standards...... and documented uncertainty limits of the dose measurements can be used to specify process control limits. This is also useful, for example, when dose setting experiments are carried out according to the methods described in ISO 11137, where product samples shall be irradiated within narrow limits......., the uncertainty of the dose measurement and the environmental influences must be known. This paper discusses how to obtain and maintain traceability and how to document measurement uncertainty. The implications of these requirements in the process control of radiation sterilization are further discussed. Known...

Standard molar enthalpies of formation and of sublimation of the terphenyl isomers

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Santos, Luis M.N.B.F.; Lima, Luis M. Spencer S.

2008-01-01

The standard (p 0 = 0.1 MPa) molar enthalpies of formation in the crystalline phases of ortho, meta and para-terphenyl isomers, at T = 298.15 K, were derived from the standard molar energies of combustion, measured by mini-bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the crystals with the temperature, thus deriving their standard molar enthalpies of sublimation by means of the Clausius-Clapeyron equation. Combining the standard molar enthalpies of formation and sublimation of the crystalline terphenyls, the standard molar enthalpies of formation in the gaseous state, at T = 298.15 K, were derived for the three isomers. Results are provided in a table. The results show small but detectable isomerization enthalpies between the terphenyls, indicating the following relative enthalpic stabilities: m- > p- ∼ o-terphenyl

New improved method for evaluation of growth by food related fungi on biologically derived materials

DEFF Research Database (Denmark)

Bergenholtz, Karina P.; Nielsen, Per Væggemose

2002-01-01

Biologically derived materials, obtained as commercial and raw materials (Polylactate (PLA), Polyhydroxybutyrate (PHB), potato, wheat and corn starch) were tested for their ability to support fungal growth using a modified ASTM G21-96 (American Society for Testing and Materials) standard as well...

Enhancing the power of genetic association studies through the use of silver standard cases derived from electronic medical records.

Directory of Open Access Journals (Sweden)

Andrew McDavid

Full Text Available The feasibility of using imperfectly phenotyped "silver standard" samples identified from electronic medical record diagnoses is considered in genetic association studies when these samples might be combined with an existing set of samples phenotyped with a gold standard technique. An analytic expression is derived for the power of a chi-square test of independence using either research-quality case/control samples alone, or augmented with silver standard data. The subset of the parameter space where inclusion of silver standard samples increases statistical power is identified. A case study of dementia subjects identified from electronic medical records from the Electronic Medical Records and Genomics (eMERGE network, combined with subjects from two studies specifically targeting dementia, verifies these results.

Relative quality of internet-derived gastrointestinal cancer information.

Science.gov (United States)

Chan, David S Y; Willicombe, Anita; Reid, Thomas D; Beaton, Ceri; Arnold, David; Ward, James; Davies, I Llion; Lewis, Wyn G

2012-12-01

Internet-derived health care information is increasingly accessed by patients, yet its quality and accuracy is variable and unregulated. The aim of this study was to assess the information available regarding common gastrointestinal cancers via three internet search engines (Google, Yahoo and Bing). The top 30 websites for each of the terms: oesophageal, gastric, pancreatic, colon and rectal cancer were evaluated (University of Michigan Consumer Health Website Checklist) and scored [-80 (poor) to 90 (excellent)]. The median score was 53 (-7 to 81) and was significantly higher for oesophageal (61) and pancreatic (65) cancer websites, compared with gastric (49), colon (48) and rectal cancer (50) (p = 0.014). Median scores related to charitable organisations were significantly better than academic, commercial, news agency, care provider, layperson and medical information websites collectively (79 vs. 42, p < 0.0001). Overall quality of internet-derived gastrointestinal cancer information remains poor and patients and clinicians should be aware.

17 CFR 37.8 - Information relating to transactions on derivatives transaction execution facilities.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Information relating to transactions on derivatives transaction execution facilities. 37.8 Section 37.8 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES TRANSACTION EXECUTION FACILITIES § 37.8...

IEEE Std 382-1980: IEEE standard for qualification of safety-related valve actuators

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. This standard may also be used to separately qualify actuator components. This standard establishes the minimum requirements for, and guidance regarding, the methods and procedures for qualification of all safety-related functions of power-driven valve actuators

External and internal standards in the single-isotope derivative (radioenzymatic) measurement of plasma norepinephrine and epinephrine

International Nuclear Information System (INIS)

Shah, S.D.; Clutter, W.E.; Cryer, P.E.

1985-01-01

In plasma from normal humans (n = 9, 35 samples) and from patients with diabetes mellitus (n = 12, 24 samples) single-isotope derivative (radioenzymatic) plasma norepinephrine and epinephrine concentrations calculated from external standard curves constructed in a normal plasma pool were identical to those calculated from internal standards added to an aliquot of each plasma sample. In plasma from patients with end-stage renal failure receiving long-term dialysis (n = 34, 109 samples), competitive catechol-O-methyltransferase (COMT) inhibitory activity resulted in a systematic error when external standards in a normal plasma pool were used, as reported previously; values so calculated averaged 21% (+/- 12%, SD) lower than those calculated from internal standards. However, when external standard curves were constructed in plasma from a given patient with renal failure and used to calculate that patient's values, or in a renal failure plasma pool and used to calculate all renal failure values, norepinephrine and epinephrine concentrations were not significantly different from those calculated from internal standards. We conclude: (1) External standard curves constructed in plasma from a given patient with renal failure can be used to measure norepinephrine and epinephrine in plasma from that patient; further, external standards in a renal failure plasma pool can be used for assays in patients with end-stage renal failure receiving long-term dialysis. (2) Major COMT inhibitory activity is not present commonly if samples from patients with renal failure are excluded. Thus, it would appear that external standard curves constructed in normal plasma can be used to measure norepinephrine and epinephrine precisely in samples from persons who do not have renal failure

Derivation and Validation of a Risk Standardization Model for Benchmarking Hospital Performance for Health-Related Quality of Life Outcomes after Acute Myocardial Infarction

Science.gov (United States)

Arnold, Suzanne V.; Masoudi, Frederick A.; Rumsfeld, John S.; Li, Yan; Jones, Philip G.; Spertus, John A.

2014-01-01

Background Before outcomes-based measures of quality can be used to compare and improve care, they must be risk-standardized to account for variations in patient characteristics. Despite the importance of health-related quality of life (HRQL) outcomes among patients with acute myocardial infarction (AMI), no risk-standardized models have been developed. Methods and Results We assessed disease-specific HRQL using the Seattle Angina Questionnaire at baseline and 1 year later in 2693 unselected AMI patients from 24 hospitals enrolled in the TRIUMPH registry. Using 57 candidate sociodemographic, economic, and clinical variables present on admission, we developed a parsimonious, hierarchical linear regression model to predict HRQL. Eleven variables were independently associated with poor HRQL after AMI, including younger age, prior CABG, depressive symptoms, and financial difficulties (R2=20%). The model demonstrated excellent internal calibration and reasonable calibration in an independent sample of 1890 AMI patients in a separate registry, although the model slightly over-predicted HRQL scores in the higher deciles. Among the 24 TRIUMPH hospitals, 1-year unadjusted HRQL scores ranged from 67–89. After risk-standardization, HRQL scores variability narrowed substantially (range=79–83), and the group of hospital performance (bottom 20%/middle 60%/top 20%) changed in 14 of the 24 hospitals (58% reclassification with risk-standardization). Conclusions In this predictive model for HRQL after AMI, we identified risk factors, including economic and psychological characteristics, associated with HRQL outcomes. Adjusting for these factors substantially altered the rankings of hospitals as compared with unadjusted comparisons. Using this model to compare risk-standardized HRQL outcomes across hospitals may identify processes of care that maximize this important patient-centered outcome. PMID:24163068

Biochemical activity of fullerenes and related derivatives

International Nuclear Information System (INIS)

Huczko, A.; Lange, H.; Calko, E.

1999-01-01

An astonishing scientific interest, embodied in over 15000 research articles so far, has been encountered since 1985 when fullerenes were discovered. From new superconductors to a rich electrochemistry and reaction chemistry, fullerene nanostructures continue to excite the scientific world, and new findings continue at record pace. This review presents many examples of the biochemical activities of fullerenes and derivatives, e. g. cytotoxic activity, selective DNA cleavage and antiviral activity against HIV. We also present some results of our testing which show that, despite its chemical and biochemical activity, fullerene matter does not present any health hazard directly related to skin irritation and allergic risks. (author)

Vaginismus and dyspareunia : Relationship with general and sex-related moral standards

NARCIS (Netherlands)

Borg, Charmaine; de Jong, Peter J.; Schultz, Willibrord Weijmar

Introduction. Relatively strong adherence to conservative values and/or relatively strict sex-related moral standards logically restricts the sexual repertoire and will lower the threshold for experiencing negative emotions in a sexual context. In turn, this may generate withdrawal and avoidance

Derivation and validation of a risk standardization model for benchmarking hospital performance for health-related quality of life outcomes after acute myocardial infarction.

Science.gov (United States)

Arnold, Suzanne V; Masoudi, Frederick A; Rumsfeld, John S; Li, Yan; Jones, Philip G; Spertus, John A

2014-01-21

Before outcomes-based measures of quality can be used to compare and improve care, they must be risk-standardized to account for variations in patient characteristics. Despite the importance of health-related quality of life (HRQL) outcomes among patients with acute myocardial infarction (AMI), no risk-standardized models have been developed. We assessed disease-specific HRQL using the Seattle Angina Questionnaire at baseline and 1 year later in 2693 unselected AMI patients from 24 hospitals enrolled in the Translational Research Investigating Underlying disparities in acute Myocardial infarction Patients' Health status (TRIUMPH) registry. Using 57 candidate sociodemographic, economic, and clinical variables present on admission, we developed a parsimonious, hierarchical linear regression model to predict HRQL. Eleven variables were independently associated with poor HRQL after AMI, including younger age, previous coronary artery bypass graft surgery, depressive symptoms, and financial difficulties (R(2)=20%). The model demonstrated excellent internal calibration and reasonable calibration in an independent sample of 1890 AMI patients in a separate registry, although the model slightly overpredicted HRQL scores in the higher deciles. Among the 24 TRIUMPH hospitals, 1-year unadjusted HRQL scores ranged from 67-89. After risk-standardization, HRQL score variability narrowed substantially (range=79-83), and the group of hospital performance (bottom 20%/middle 60%/top 20%) changed in 14 of the 24 hospitals (58% reclassification with risk-standardization). In this predictive model for HRQL after AMI, we identified risk factors, including economic and psychological characteristics, associated with HRQL outcomes. Adjusting for these factors substantially altered the rankings of hospitals as compared with unadjusted comparisons. Using this model to compare risk-standardized HRQL outcomes across hospitals may identify processes of care that maximize this important patient

A stochastic model for the derivation of economic values and their standard deviations for production and functional traits in dairy cattle

DEFF Research Database (Denmark)

Nielsen, Hanne-Marie; Groen, A F; Østergaard, Søren

2006-01-01

The objective of this paper was to present a model of a dairy cattle production system for the derivation of economic values and their standard deviations for both production and functional traits under Danish production circumstances. The stochastic model used is dynamic, and simulates production...... was -0.94 €/day per cow-year. Standard deviations of economic values expressing variation in realised profit of a farm before and after a genetic change were computed using a linear Taylor series expansion. Expressed as coefficient of variation, standard deviations of economic values based on 1000...

Standard Errors for Matrix Correlations.

Science.gov (United States)

Ogasawara, Haruhiko

1999-01-01

Derives the asymptotic standard errors and intercorrelations for several matrix correlations assuming multivariate normality for manifest variables and derives the asymptotic standard errors of the matrix correlations for two factor-loading matrices. (SLD)

77 FR 50757 - Charging Standard Administrative Fees for Nonprogram-Related Information

Science.gov (United States)

2012-08-22

... are announcing the standardized administrative fees we will charge to recover our full cost of... will ensure fees are consistent and that we collect the full cost of supplying our information when a... standard fees that are calculated to reflect the full cost of providing information for nonprogram-related...

Towards standard testbeds for numerical relativity

International Nuclear Information System (INIS)

Alcubierre, Miguel; Allen, Gabrielle; Bona, Carles; Fiske, David; Goodale, Tom; Guzman, F Siddhartha; Hawke, Ian; Hawley, Scott H; Husa, Sascha; Koppitz, Michael; Lechner, Christiane; Pollney, Denis; Rideout, David; Salgado, Marcelo; Schnetter, Erik; Seidel, Edward; Shinkai, Hisa-aki; Shoemaker, Deirdre; Szilagyi, Bela; Takahashi, Ryoji; Winicour, Jeff

2004-01-01

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step towards building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources and can be used with many different approaches used in the relativity community

Towards standard testbeds for numerical relativity

Energy Technology Data Exchange (ETDEWEB)

Alcubierre, Miguel [Inst. de Ciencias Nucleares, Univ. Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico Distrito Federal 04510 (Mexico); Allen, Gabrielle; Goodale, Tom; Guzman, F Siddhartha; Hawke, Ian; Husa, Sascha; Koppitz, Michael; Lechner, Christiane; Pollney, Denis; Rideout, David [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Institut, 14476 Golm (Germany); Bona, Carles [Departament de Fisica, Universitat de les Illes Balears, Ctra de Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Fiske, David [Dept. of Physics, Univ. of Maryland, College Park, MD 20742-4111 (United States); Hawley, Scott H [Center for Relativity, Univ. of Texas at Austin, Austin, Texas 78712 (United States); Salgado, Marcelo [Inst. de Ciencias Nucleares, Univ. Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico Distrito Federal 04510 (Mexico); Schnetter, Erik [Inst. fuer Astronomie und Astrophysik, Universitaet Tuebingen, 72076 Tuebingen (Germany); Seidel, Edward [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Inst., 14476 Golm (Germany); Shinkai, Hisa-aki [Computational Science Div., Inst. of Physical and Chemical Research (RIKEN), Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Shoemaker, Deirdre [Center for Radiophysics and Space Research, Cornell Univ., Ithaca, NY 14853 (United States); Szilagyi, Bela [Dept. of Physics and Astronomy, Univ. of Pittsburgh, Pittsburgh, PA 15260 (United States); Takahashi, Ryoji [Theoretical Astrophysics Center, Juliane Maries Vej 30, 2100 Copenhagen, (Denmark); Winicour, Jeff [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Institut, 14476 Golm (Germany)

2004-01-21

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step towards building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources and can be used with many different approaches used in the relativity community.

The Rhetoric of Arrogance: The Public Relations Response of the Standard Oil Trust.

Science.gov (United States)

Boyd, Josh

2001-01-01

Illustrates one of the earliest American public relations debacles (ending in the dissolution of the Standard Oil Trust in 1911). Presents background on Standard Oil and offers an overview Ida Tarbell's influential "History of the Standard Oil company." Argues that Standard failed to respond to these accounts adequately, reinforcing…

The standardization of data relational mode in the materials database for nuclear power engineering

International Nuclear Information System (INIS)

Wang Xinxuan

1996-01-01

A relational database needs standard data relation ships. The data relation ships include hierarchical structures and repeat set records. Code database is created and the relational database is created between spare parts and materials and properties of the materials. The data relation ships which are not standard are eliminated and all the relation modes are made to meet the demands of the 3NF (Third Norm Form)

Deriving mass-energy equivalence and mass-velocity relation without light

Science.gov (United States)

Dai, Youshan; Dai, Liang

2018-04-01

Relativity requires that a particle's momentum and energy are the same functions of the particle's velocity in all inertial frames. Using the fact that momentum and energy must transform linearly between reference frames, we present a novel derivation of the mass-energy equivalence, namely, the relation that the energy is proportional to the moving mass, with no postulate about the existence of light or its properties. We further prove the mass-velocity relation without relying on momentum and energy conservation or on the Lorentz transformation. It is demonstrated that neither conservation laws nor the Lorentz transformation are necessary to establish those relations, and that those relations have a wider scope of validity than that of the conservation laws and the invariance of the speed of light.

Constructing and deriving reciprocal trigonometric relations: a functional analytic approach.

Science.gov (United States)

Ninness, Chris; Dixon, Mark; Barnes-Holmes, Dermot; Rehfeldt, Ruth Anne; Rumph, Robin; McCuller, Glen; Holland, James; Smith, Ronald; Ninness, Sharon K; McGinty, Jennifer

2009-01-01

Participants were pretrained and tested on mutually entailed trigonometric relations and combinatorially entailed relations as they pertained to positive and negative forms of sine, cosine, secant, and cosecant. Experiment 1 focused on training and testing transformations of these mathematical functions in terms of amplitude and frequency followed by tests of novel relations. Experiment 2 addressed training in accordance with frames of coordination (same as) and frames of opposition (reciprocal of) followed by more tests of novel relations. All assessments of derived and novel formula-to-graph relations, including reciprocal functions with diversified amplitude and frequency transformations, indicated that all 4 participants demonstrated substantial improvement in their ability to identify increasingly complex trigonometric formula-to-graph relations pertaining to same as and reciprocal of to establish mathematically complex repertoires.

A novel baseline-correction method for standard addition based derivative spectra and its application to quantitative analysis of benzo(a)pyrene in vegetable oil samples.

Science.gov (United States)

Li, Na; Li, Xiu-Ying; Zou, Zhe-Xiang; Lin, Li-Rong; Li, Yao-Qun

2011-07-07

In the present work, a baseline-correction method based on peak-to-derivative baseline measurement was proposed for the elimination of complex matrix interference that was mainly caused by unknown components and/or background in the analysis of derivative spectra. This novel method was applicable particularly when the matrix interfering components showed a broad spectral band, which was common in practical analysis. The derivative baseline was established by connecting two crossing points of the spectral curves obtained with a standard addition method (SAM). The applicability and reliability of the proposed method was demonstrated through both theoretical simulation and practical application. Firstly, Gaussian bands were used to simulate 'interfering' and 'analyte' bands to investigate the effect of different parameters of interfering band on the derivative baseline. This simulation analysis verified that the accuracy of the proposed method was remarkably better than other conventional methods such as peak-to-zero, tangent, and peak-to-peak measurements. Then the above proposed baseline-correction method was applied to the determination of benzo(a)pyrene (BaP) in vegetable oil samples by second-derivative synchronous fluorescence spectroscopy. The satisfactory results were obtained by using this new method to analyze a certified reference material (coconut oil, BCR(®)-458) with a relative error of -3.2% from the certified BaP concentration. Potentially, the proposed method can be applied to various types of derivative spectra in different fields such as UV-visible absorption spectroscopy, fluorescence spectroscopy and infrared spectroscopy.

Geometry of physical dispersion relations

International Nuclear Information System (INIS)

Raetzel, Dennis; Rivera, Sergio; Schuller, Frederic P.

2011-01-01

To serve as a dispersion relation, a cotangent bundle function must satisfy three simple algebraic properties. These conditions are derived from the inescapable physical requirements that local matter field dynamics must be predictive and allow for an observer-independent notion of positive energy. Possible modifications of the standard relativistic dispersion relation are thereby severely restricted. For instance, the dispersion relations associated with popular deformations of Maxwell theory by Gambini-Pullin or Myers-Pospelov are not admissible. Dispersion relations passing the simple algebraic checks derived here correspond to physically admissible Finslerian refinements of Lorentzian geometry.

Turkish Accounting Standards, IAS - 39 "Financial Instruments: Recognition and Measurement" Under the Cash Flow Hedge Derivative Products Use: The Case of Forward

Directory of Open Access Journals (Sweden)

Emine ÇINA BAL

2013-06-01

Full Text Available Businesses face interest rate, exchange rate, liquidity, use derivative financial instruments to hedge against such risks. Forward transactions with derivative financial instruments, the non-organized markets, interest rates pre-determined future date, foreign currency contracts that contain delivery of goods as well as financial assets. Cash flow hedge that forms the subject of this study, a recognized asset or liability or a highly probable forecast transaction and the net profit or loss attributable to a particular risk of affecting the nature of a cash flow hedge to hedge changes in the process. Study the case of the application of foreign money has a tangible fixed asset purchases. Related to the purchase of tangible fixed assets at future foreign mercenaries were forward contracts to hedge the cash flow risk. Forward contracts, principal accounts on the balance sheet in accordance with IAS 39 Standard, derivative financial instruments are shown as fixed assets. The fair value of the contract during the contract period at the end of the period to show the valuation differences arising from the valuation of equity shown in the balance sheet. Net valuation differences arising from the contract are accounted for by two separate options. The first option, the net costs associated with the asset valuation difference. The second option is deducted from the amount of depreciation for the asset at the end of the period.

Chemical equilibrium. [maximizing entropy of gas system to derive relations between thermodynamic variables

Science.gov (United States)

1976-01-01

The entropy of a gas system with the number of particles subject to external control is maximized to derive relations between the thermodynamic variables that obtain at equilibrium. These relations are described in terms of the chemical potential, defined as equivalent partial derivatives of entropy, energy, enthalpy, free energy, or free enthalpy. At equilibrium, the change in total chemical potential must vanish. This fact is used to derive the equilibrium constants for chemical reactions in terms of the partition functions of the species involved in the reaction. Thus the equilibrium constants can be determined accurately, just as other thermodynamic properties, from a knowledge of the energy levels and degeneracies for the gas species involved. These equilibrium constants permit one to calculate the equilibrium concentrations or partial pressures of chemically reacting species that occur in gas mixtures at any given condition of pressure and temperature or volume and temperature.

Can the causal pathologies of Goedel-type universes be avoided in higher-derivative gravity

International Nuclear Information System (INIS)

Accioly, A.J.; Goncalves, A.T.

1986-10-01

A completely causal rotating Goedel-type universe is obtained in the context of higher-derivative gravity. The solution is such that it has no similar in the framework of standard general relativity. The aforementioned solution presents the interesting feature of relating the mass of the nontachyonic spin-O particle, concerning the linearized higher-derivative theory, with the velocity of rigid rotation of matter. (Author) [pt

Silicon Damage Response Function Derivation and Verification: Assessment of Impact on ASTM Standard E722

Energy Technology Data Exchange (ETDEWEB)

Depriest, Kendall [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-06-01

Unsuccessful attempts by members of the radiation effects community to independently derive the Norgett-Robinson-Torrens (NRT) damage energy factors for silicon in ASTM standard E722-14 led to an investigation of the software coding and data that produced those damage energy factors. The ad hoc collaboration to discover the reason for lack of agreement revealed a coding error and resulted in a report documenting the methodology to produce the response function for the standard. The recommended changes in the NRT damage energy factors for silicon are shown to have significant impact for a narrow energy region of the 1-MeV(Si) equivalent fluence response function. However, when evaluating integral metrics over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in a small decrease in the total 1- MeV(Si) equivalent fluence of ~0.6% compared to the E722-14 response. Response functions based on the newly recommended NRT damage energy factors have been produced and are available for users of both the NuGET and MCNP codes.

Present status of standards relating to radiation control and protection

International Nuclear Information System (INIS)

Minami, Kentaro

1996-01-01

Japanese and international standards related to radiation control and radiation protective management are presented focusing on the forming condition, significance, current situation, and their relationship. Japanese Industrial Standards (JIS) is quite useful in the field of atomic energy as well as other fields in terms of optimization and rationalization of the management. JIS includes JIS Z 4001 Atomic Energy Terminology which corresponds to internationl standards ISO 921 Nuclear Glossary, and JIS Z 4005 Medical Radiation Terminology, covering about 500 articles, which corresponds to IEC 788 Medical Radiology-Terminology. The first standards regarding radiation protection was established in X-ray Film Badge, which is included in the field of personal dosimeter, in 1956. Currently, 36 JIS has been established in the field of radiation management dosimeter and 3 are under arrangement. As for radiation protective supplies, 9 JIS has been established so far. Before proposal of JIS, investigation had been conducted to improve, simplify, and standardize the standards of radiation dosimetric technique, dosimeters, dosimetric procedures, and improvement. In this article, the results of material surface contamination monitoring and body surface monitoring conducted in Atomic Energy Safety Association and Radiation Dosimetry Associationare reported, and ISO and IEC are also treated. (S.Y.)

Laguerre-type derivatives: Dobinski relations and combinatorial identities

International Nuclear Information System (INIS)

Penson, K. A.; Blasiak, P.; Horzela, A.; Duchamp, G. H. E.; Solomon, A. I.

2009-01-01

We consider properties of the operators D(r,M)=a r (a † a) M (which we call generalized Laguerre-type derivatives), with r=1,2,..., M=0,1,..., where a and a † are boson annihilation and creation operators, respectively, satisfying [a,a † ]=1. We obtain explicit formulas for the normally ordered form of arbitrary Taylor-expandable functions of D(r,M) with the help of an operator relation that generalizes the Dobinski formula. Coherent state expectation values of certain operator functions of D(r,M) turn out to be generating functions of combinatorial numbers. In many cases the corresponding combinatorial structures can be explicitly identified.

A stochastic model for the derivation of economic values and their standard deviations for production and functional traits in dairy cattle

NARCIS (Netherlands)

Nielsen, H.M.; Groen, A.F.; Ostergaard, S.; Berg, P.

2006-01-01

The objective of this paper was to present a model of a dairy cattle production system for the derivation of economic values and their standard deviations for both production and functional traits under Danish production circumstances. The stochastic model used is dynamic, and simulates production

Completely monotonic functions related to logarithmic derivatives of entire functions

DEFF Research Database (Denmark)

Pedersen, Henrik Laurberg

2011-01-01

The logarithmic derivative l(x) of an entire function of genus p and having only non-positive zeros is represented in terms of a Stieltjes function. As a consequence, (-1)p(xml(x))(m+p) is a completely monotonic function for all m ≥ 0. This generalizes earlier results on complete monotonicity...... of functions related to Euler's psi-function. Applications to Barnes' multiple gamma functions are given....

Comparison of uncertainties related to standardization of urine samples with volume and creatinine concentration

DEFF Research Database (Denmark)

Garde, Anne Helene; Hansen, Ase Marie; Kristiansen, Jesper

2004-01-01

When measuring biomarkers in urine, volume (and time) or concentration of creatinine are both accepted methods of standardization for diuresis. Both types of standardization contribute uncertainty to the final result. The aim of the present paper was to compare the uncertainty introduced when usi...... increase in convenience for the participants, when collecting small volumes rather than complete 24 h samples....... the two types of standardization on 24 h samples from healthy individuals. Estimates of uncertainties were based on results from the literature supplemented with data from our own studies. Only the difference in uncertainty related to the two standardization methods was evaluated. It was found...... that the uncertainty associated with creatinine standardization (19-35%) was higher than the uncertainty related to volume standardization (up to 10%, when not correcting for deviations from 24 h) for 24 h urine samples. However, volume standardization introduced an average bias of 4% due to missed volumes...

Effects of Mastery Criterion on the Emergence of Derived Equivalence Relations

Science.gov (United States)

Fienup, Daniel M.; Brodsky, Julia

2017-01-01

In this study, we manipulated mastery criterion form (rolling or block) and stringency (across 6 or 12 trials) and measured the emergence of derived relations. College students learned neuroanatomy equivalence classes and experienced one of two rolling mastery criteria (6 or 12 consecutive correct responses) or a block mastery criterion (12 trials…

Standardization in smart grids. Introduction to IT-related methodologies, architectures and standards

Energy Technology Data Exchange (ETDEWEB)

Uslar, Mathias; Specht, Michael; Daenekas, Christian; Trefke, Joern; Rohjans, Sebastian; Gonzalez, Jose M.; Rosinger, Christine; Bleiker, Robert [OFFIS - Institut fuer Informatik, Oldenburg (Germany)

2013-03-01

Introduction to Standardization for Smart Grids. Presents a tutorial and best practice of Smart Grid Prototype Projects. Written by leading experts in the field. Besides the regulatory and market aspects, the technical level dealing with the knowledge from multiple disciplines and the aspects of technical system integration to achieve interoperability and integration has been a strong focus in the Smart Grid. This topic is typically covered by the means of using (technical) standards for processes, data models, functions and communication links. Standardization is a key issue for Smart Grids due to the involvement of many different sectors along the value chain from the generation to the appliances. The scope of Smart Grid is broad, therefore, the standards landscape is unfortunately very large and complex. This is why the three European Standards Organizations ETSI, CEN and CENELEC created a so called Joint Working Group (JWG). This was the first harmonized effort in Europe to bring together the needed disciplines and experts delivering the final report in May 2011. After this approach proved useful, the Commission used the Mandate M/490: Standardization Mandate to European Standardization Organizations (ESOs) to support European Smart Grid deployment. The focal point addressing the ESO's response to M/490 will be the CEN, CENELEC and ETSI Smart Grids Coordination Group (SG-CG). Based on this mandate, meaningful standardization of architectures, use cases, communication technologies, data models and security standards takes place in the four existing working groups. This book provides an overview on the various building blocks and standards identified as the most prominent ones by the JWG report as well as by the first set of standards group - IEC 61850 and CIM, IEC PAS 62559 for documenting Smart Grid use cases, security requirements from the SGIS groups and an introduction on how to apply the Smart Grid Architecture Model SGAM for utilities. In addition

Special relativity derived from spacetime magma.

Science.gov (United States)

Greensite, Fred

2014-01-01

We present a derivation of relativistic spacetime largely untethered from specific physical considerations, in constrast to the many physically-based derivations that have appeared in the last few decades. The argument proceeds from the inherent magma (groupoid) existing on the union of spacetime frame components [Formula: see text] and Euclidean [Formula: see text] which is consistent with an "inversion symmetry" constraint from which the Minkowski norm results. In this context, the latter is also characterized as one member of a class of "inverse norms" which play major roles with respect to various unital [Formula: see text]-algebras more generally.

Special relativity derived from spacetime magma.

Directory of Open Access Journals (Sweden)

Fred Greensite

Full Text Available We present a derivation of relativistic spacetime largely untethered from specific physical considerations, in constrast to the many physically-based derivations that have appeared in the last few decades. The argument proceeds from the inherent magma (groupoid existing on the union of spacetime frame components [Formula: see text] and Euclidean [Formula: see text] which is consistent with an "inversion symmetry" constraint from which the Minkowski norm results. In this context, the latter is also characterized as one member of a class of "inverse norms" which play major roles with respect to various unital [Formula: see text]-algebras more generally.

Proteomics wants cRacker: automated standardized data analysis of LC-MS derived proteomic data.

Science.gov (United States)

Zauber, Henrik; Schulze, Waltraud X

2012-11-02

The large-scale analysis of thousands of proteins under various experimental conditions or in mutant lines has gained more and more importance in hypothesis-driven scientific research and systems biology in the past years. Quantitative analysis by large scale proteomics using modern mass spectrometry usually results in long lists of peptide ion intensities. The main interest for most researchers, however, is to draw conclusions on the protein level. Postprocessing and combining peptide intensities of a proteomic data set requires expert knowledge, and the often repetitive and standardized manual calculations can be time-consuming. The analysis of complex samples can result in very large data sets (lists with several 1000s to 100,000 entries of different peptides) that cannot easily be analyzed using standard spreadsheet programs. To improve speed and consistency of the data analysis of LC-MS derived proteomic data, we developed cRacker. cRacker is an R-based program for automated downstream proteomic data analysis including data normalization strategies for metabolic labeling and label free quantitation. In addition, cRacker includes basic statistical analysis, such as clustering of data, or ANOVA and t tests for comparison between treatments. Results are presented in editable graphic formats and in list files.

Prophylactic role of taurine and its derivatives against diabetes mellitus and its related complications.

Science.gov (United States)

Sarkar, Poulami; Basak, Priyanka; Ghosh, Sumit; Kundu, Mousumi; Sil, Parames C

2017-12-01

Taurine is a conditionally essential amino acid present in the body in free form. Mammalian taurine is synthesized in the pancreas via the cysteine sulfinic acid pathway. Anti-oxidation and anti-inflammation are two main properties through which it exerts its therapeutic effects. Many studies have shown its excellent therapeutic potential against diabetes mellitus and related complications like diabetic neuropathy, retinopathy, nephropathy, hematological dysfunctions, reproductive dysfunctions, liver and pancreas related complications etc. Not only taurine, a number of its derivatives have also been reported to be important in ameliorating diabetic complications. The present review has been aimed to describe the importance of taurine and its derivatives against diabetic metabolic syndrome and related complications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Generalized relations among N-dimensional Coulomb Green's functions using fractional derivatives

International Nuclear Information System (INIS)

Blinder, S.M.; Pollock, E.L.

1989-01-01

Hostler [J. Math. Phys. 11, 2966 (1970)] has shown that Coulomb Green's functions of different dimensionality N are related by G (N+2) =OG (N) , where O is a first-order derivative operator in the variables x and y. Thus all the even-dimensional functions are connected, as are analogously the odd-dimensional functions. It is shown that the operations of functional differentiation and integration can further connect the even- to the odd-dimensional functions, so that Hostler's relation can be extended to give G (N+1) =O 1/2 G (N)

Escort entropies and divergences and related canonical distribution

International Nuclear Information System (INIS)

Bercher, J.-F.

2011-01-01

We discuss two families of two-parameter entropies and divergences, derived from the standard Renyi and Tsallis entropies and divergences. These divergences and entropies are found as divergences or entropies of escort distributions. Exploiting the nonnegativity of the divergences, we derive the expression of the canonical distribution associated to the new entropies and a observable given as an escort-mean value. We show that this canonical distribution extends, and smoothly connects, the results obtained in nonextensive thermodynamics for the standard and generalized mean value constraints. -- Highlights: → Two-parameter entropies are derived from q-entropies and escort distributions. → The related canonical distribution is derived. → This connects and extends known results in nonextensive statistics.

Technical Review of Law Enforcement Standards and Guides Relative to Incident Management

Energy Technology Data Exchange (ETDEWEB)

Stenner, Robert D.; Salter, R.; Stanton, J. R.; Fisher, D.

2009-03-24

In an effort to locate potential law enforcement-related standards that support incident management, a team from the Pacific Northwest National Laboratory (PNNL) contacted representatives from the National Institute of Standards-Office of Law Enforcement Standards (NIST-OLES), National Institute of Justice (NIJ), Federal Bureau of Investigation (FBI), Secret Service, ASTM International committees that have a law enforcement focus, and a variety of individuals from local and regional law enforcement organizations. Discussions were held with various state and local law enforcement organizations. The NIJ has published several specific equipment-related law enforcement standards that were included in the review, but it appears that law enforcement program and process-type standards are developed principally by organizations that operate at the state and local level. Input is provided from state regulations and codes and from external non-government organizations (NGOs) that provide national standards. The standards that are adopted from external organizations or developed independently by state authorities are available for use by local law enforcement agencies on a voluntary basis. The extent to which they are used depends on the respective jurisdictions involved. In some instances, use of state and local disseminated standards is mandatory, but in most cases, use is voluntary. Usually, the extent to which these standards are used appears to depend on whether or not jurisdictions receive certification from a “governing” entity due to their use and compliance with the standards. In some cases, these certification-based standards are used in principal but without certification or other compliance monitoring. In general, these standards appear to be routinely used for qualification, selection for employment, and training. In these standards, the term “Peace Officer” is frequently used to refer to law enforcement personnel. This technical review of national law

SITE SPECIFIC REFERENCE PERSON PARAMETERS AND DERIVED CONCENTRATION STANDARDS FOR THE SAVANNAH RIVER SITE

Energy Technology Data Exchange (ETDEWEB)

Jannik, T.

2013-03-14

The purpose of this report is twofold. The first is to develop a set of behavioral parameters for a reference person specific for the Savannah River Site (SRS) such that the parameters can be used to determine dose to members of the public in compliance with Department of Energy (DOE) Order 458.1 “Radiation Protection of the Public and the Environment.” A reference person is a hypothetical, gender and age aggregation of human physical and physiological characteristics arrived at by international consensus for the purpose of standardizing radiation dose calculations. DOE O 458.1 states that compliance with the annual dose limit of 100 mrem (1 mSv) to a member of the public may be demonstrated by calculating the dose to the maximally exposed individual (MEI) or to a representative person. Historically, for dose compliance, SRS has used the MEI concept, which uses adult dose coefficients and adult male usage parameters. Beginning with the 2012 annual site environmental report, SRS will be using the representative person concept for dose compliance. The dose to a representative person will be based on 1) the SRS-specific reference person usage parameters at the 95th percentile of appropriate national or regional data, which are documented in this report, 2) the reference person (gender and age averaged) ingestion and inhalation dose coefficients provided in DOE Derived Concentration Technical Standard (DOE-STD-1196-2011), and 3) the external dose coefficients provided in the DC_PAK3 toolbox. The second purpose of this report is to develop SRS-specific derived concentration standards (DCSs) for all applicable food ingestion pathways, ground shine, and water submersion. The DCS is the concentration of a particular radionuclide in water, in air, or on the ground that results in a member of the public receiving 100 mrem (1 mSv) effective dose following continuous exposure for one year. In DOE-STD-1196-2011, DCSs were developed for the ingestion of water, inhalation of

75 FR 60616 - Commission Guidance Regarding Auditing, Attestation, and Related Professional Practice Standards...

Science.gov (United States)

2010-10-01

... Regarding Auditing, Attestation, and Related Professional Practice Standards Related To Brokers and Dealers... Oversight Board in the Dodd-Frank Wall Street Reform and Consumer Protection Act to establish auditing... 60617

Tannins and Tannin-Related Derivatives Enhance the (Pseudo-)Halogenating Activity of Lactoperoxidase.

Science.gov (United States)

Gau, Jana; Prévost, Martine; Van Antwerpen, Pierre; Sarosi, Menyhárt-Botond; Rodewald, Steffen; Arnhold, Jürgen; Flemmig, Jörg

2017-05-26

Several hydrolyzable tannins, proanthocyanidins, tannin derivatives, and a tannin-rich plant extract of tormentil rhizome were tested for their potential to regenerate the (pseudo-)halogenating activity, i.e., the oxidation of SCN - to hypothiocyanite - OSCN, of lactoperoxidase (LPO) after hydrogen peroxide-mediated enzyme inactivation. Measurements were performed using 5-thio-2-nitrobenzoic acid in the presence of tannins and related substances in order to determine kinetic parameters and to trace the LPO-mediated - OSCN formation. The results were combined with docking studies and molecular orbital analysis. The - OSCN-regenerating effect of tannin derivatives relates well with their binding properties toward LPO as well as their occupied molecular orbitals. Especially simple compounds like ellagic acid or methyl gallate and the complex plant extract were found as potent enzyme-regenerating compounds. As the (pseudo-)halogenating activity of LPO contributes to the maintenance of oral bacterial homeostasis, the results provide new insights into the antibacterial mode of action of tannins and related compounds. Furthermore, chemical properties of the tested compounds that are important for efficient enzyme-substrate interaction and regeneration of the - OSCN formation by LPO were identified.

Norms and international standards related to reduce risk management: A literature review

Directory of Open Access Journals (Sweden)

César Fuentes

2011-09-01

Full Text Available The current work aims to develop a revision of the literature within the main concepts in the international rules and standards related to risk management in companies. By this way, there will be an analysis of issues such as the COSO - ERM model, an introduction to the ISO 27000 and 31000 standards; and the Project Management according to PMI targeted at risk management

Note on asymptotic series expansions for the derivative of the Hurwitz zeta function and related functions

International Nuclear Information System (INIS)

Rudaz, S.

1990-01-01

Asymptotic series for the Hurwitz zeta function, its derivative, and related functions (including the Riemann zeta function of odd integer argument) are derived as an illustration of a simple, direct method of broad applicability, inspired by the calculus of finite differences

A successful search for symmetry (and other derived relations) in the conditional discriminations of pigeons 1, 2

Science.gov (United States)

Urcuioli, Peter J.

2017-01-01

Symmetry is one of three derived relations (along with transitivity and reflexivity) that indicate that explicitly trained conditional relations are equivalence relations and that the elements of those trained relations are members of a stimulus class. Although BA symmetry is typically observed after AB conditional discrimination training in humans, it has been an elusive phenomenon in other animals until just recently. This paper describes past unsuccessful attempts to observe symmetry in non-human animals and the likely reasons for that lack of success. I then describe how methodological changes made in response to the earlier findings have now yielded robust evidence for symmetry in pigeons, and what these changes indicate about the functional matching stimuli. Finally, I describe a theory of stimulus-class formation (Urcuioli, 2008) which specifies how and why symmetry and other derived relations arise from different sets of trained relations. These derived relations are noteworthy because they demonstrate an impressive repertoire of non-similarity-based categorization effects in animals and the generative effects of reinforcement and stimulus control processes on behavior. PMID:28386579

Higher-derivative Lee-Wick unification

International Nuclear Information System (INIS)

Carone, Christopher D.

2009-01-01

We consider gauge coupling unification in Lee-Wick extensions of the Standard Model that include higher-derivative quadratic terms beyond the minimally required set. We determine how the beta functions are modified when some Standard Model particles have two Lee-Wick partners. We show that gauge coupling unification can be achieved in such models without requiring the introduction of additional fields in the higher-derivative theory and we comment on possible ultraviolet completions.

A Simple Derivation of Time Dilation and Length Contraction in Special Relativity

Science.gov (United States)

Behroozi, Fred

2014-01-01

Undergraduate physics majors typically begin their study of modern physics with special relativity. It is here that physics students first encounter the counterintuitive concepts of time dilation and length contraction. Unfortunately, the derivations of these results are often cloaked in several layers of analysis that render them rather…

Induced Pluripotent Stem Cell Derived Mesenchymal Stem Cells for Attenuating Age-Related Bone Loss

Science.gov (United States)

2012-07-01

Mesenchymal stem cell (MSC) differentiation towards the bone forming osteoblastic lineage decreases as a function of age and may contribute to age-related...problem of age-related reduced availability of MSC we propose to examine the bone anabolic potential of induced pluripotent stem cell (iPS) derived MSC

Review of international standards related to the design for control rooms on nuclear power plants

International Nuclear Information System (INIS)

Kitamura, Masashi; Yoshikawa, Hidekazu; Fujita, Yushi

2005-01-01

The improvement of Human-Machine Interface (HMI) design for control rooms on nuclear power plants (NPP) has been accomplished world wide, especially after the TMI-2 accident. The design process and guidelines are standardized in IEC60964 and supplemental standards as international standard. However, technological update is required due to the increased use of computerized control and monitoring equipment and systems in control rooms on NPP in recent years. Standards are becoming more important for computerized control rooms because there is more freedom to design than conventional hardware based system. For computerized control rooms, standards for hardware and software of HMI systems should be also considered. Standards and guidelines for computerized control rooms on NPP have been developed recently in each body such as IEC, ISO, and IEEE etc. Therefore, reviewing these standards and guidelines related to control rooms design of NPP can be useful not only for revision of the international standards such as IEC60964, but also for users of the standards and guidelines. In this paper, we reviewed the international standards related to the design for control rooms, in the two aspects of HMI design and hardware and software design, considering the undergoing revision work and their application. (author)

Newtonian potential and geodesic completeness in infinite derivative gravity

Science.gov (United States)

Edholm, James; Conroy, Aindriú

2017-08-01

Recent study has shown that a nonsingular oscillating potential—a feature of infinite derivative gravity theories—matches current experimental data better than the standard General Relativity potential. In this work, we show that this nonsingular oscillating potential can be given by a wider class of theories which allows the defocusing of null rays and therefore geodesic completeness. We consolidate the conditions whereby null geodesic congruences may be made past complete, via the Raychaudhuri equation, with the requirement of a nonsingular Newtonian potential in an infinite derivative gravity theory. In doing so, we examine a class of Newtonian potentials characterized by an additional degree of freedom in the scalar propagator, which returns the familiar potential of General Relativity at large distances.

Coronary CT Angiography Derived Fractional Flow Reserve

DEFF Research Database (Denmark)

Nørgaard, Bjarne Linde; Jensen, Jesper Møller; Blanke, Philipp

2017-01-01

Purpose of Review: To summarize the scientific basis of CT derived fractional flow reserve (FFRCT) and present an updated review on the evidence from clinical trials and real-world observational data Recent Findings: In prospective multicenter studies of patients with stable coronary artery disea...... of patients with stable CAD. The optimal FFRCT testing interpretation strategy, as well as the relative cost-efficiency of FFRCT against standard noninvasive functional testing, need further investigation....

Review of Sodium and Plutonium related Technical Standards in Trans-Uranium Fuel Fabrication Facilities

Energy Technology Data Exchange (ETDEWEB)

Jang, Misuk; Jeon, Jong Seon; Kang, Hyun Sik; Kim, Seoung Rae [NESS, Daejeon (Korea, Republic of)

2016-10-15

In this paper, we would introduce and review technical standards related to sodium fire and plutonium criticality safety. This paper may be helpful to identify considerations in the development of equipment, standards, and etc., to meet the safety requirements in the design, construction and operating of TFFF, KAPF and SFR. The feasibility and conceptual designs are being examined on related facilities, for example, TRU Fuel Fabrication Facilities (TFFF), Korea Advanced Pyro-process Facility (KAPF), and Sodium Cooled Fast Reactor (SFR), in Korea. However, the safety concerns of these facilities have been controversial in part because of the Sodium fire accident and Plutonium related radiation safety caused by transport and handling accident. Thus, many researches have been performed to ensure safety and various documents including safety requirements have been developed. In separating and reducing the long-lived radioactive transuranic(TRU) in the spent nuclear fuel, reusing as the potential energy of uranium fuel resources and reducing the high level wastes, TFFF would be receiving the attention of many people. Thus, people would wonder whether compliance with technical standards that ensures safety. For new facility design, one of the important tasks is to review of technical standards, especially for sodium and Plutonium because of water related highly reactive characteristics and criticality hazard respectively. We have introduced and reviewed two important technical standards for TFFF, which are sodium fire and plutonium criticality safety, in this paper. This paper would provide a brief guidance, about how to start and what is important, to people who are responsible for the initial design to operation of TFFF.

Review of Sodium and Plutonium related Technical Standards in Trans-Uranium Fuel Fabrication Facilities

International Nuclear Information System (INIS)

Jang, Misuk; Jeon, Jong Seon; Kang, Hyun Sik; Kim, Seoung Rae

2016-01-01

In this paper, we would introduce and review technical standards related to sodium fire and plutonium criticality safety. This paper may be helpful to identify considerations in the development of equipment, standards, and etc., to meet the safety requirements in the design, construction and operating of TFFF, KAPF and SFR. The feasibility and conceptual designs are being examined on related facilities, for example, TRU Fuel Fabrication Facilities (TFFF), Korea Advanced Pyro-process Facility (KAPF), and Sodium Cooled Fast Reactor (SFR), in Korea. However, the safety concerns of these facilities have been controversial in part because of the Sodium fire accident and Plutonium related radiation safety caused by transport and handling accident. Thus, many researches have been performed to ensure safety and various documents including safety requirements have been developed. In separating and reducing the long-lived radioactive transuranic(TRU) in the spent nuclear fuel, reusing as the potential energy of uranium fuel resources and reducing the high level wastes, TFFF would be receiving the attention of many people. Thus, people would wonder whether compliance with technical standards that ensures safety. For new facility design, one of the important tasks is to review of technical standards, especially for sodium and Plutonium because of water related highly reactive characteristics and criticality hazard respectively. We have introduced and reviewed two important technical standards for TFFF, which are sodium fire and plutonium criticality safety, in this paper. This paper would provide a brief guidance, about how to start and what is important, to people who are responsible for the initial design to operation of TFFF

Isoxazole-type derivatives related to combretastatin A-4, synthesis and biological evaluation.

Science.gov (United States)

Kaffy, Julia; Pontikis, Renée; Carrez, Danièle; Croisy, Alain; Monneret, Claude; Florent, Jean-Claude

2006-06-15

Novel combretastatin analogues bearing various five-membered heterocycles with consecutive oxygen and nitrogen atoms, in place of the olefinic bridge of CA4, have been synthesized (isoxazole, isoxazoline, oxadiazole, etc). These compounds have been evaluated for cytotoxicity and their ability to inhibit the tubulin assembly. On the basis of the relative position of the aromatic A- and B-rings on the heterocyclic moiety, they could be split in two classes, the alpha,gamma- or alpha,beta-diaryl heterocyclic derivatives. In the first series, the 3,5-diaryloxadiazole 9a displayed comparable antitubulin activity to that of CA4, but was devoid of cytotoxic effects. Among the alpha,beta-diaryl heterocyclic derivatives, the 4,5-diarylisoxazole 35 exhibited greater antitubulin activity than that of CA4 (0.75 vs 1.2 microM), but modest antiproliferative activity. These data showed that minor alteration in the chemical structure of the heterocyclic ring and its relative orientation with regard to the two phenyl rings of CA4 could dramatically influence the tubulin binding properties.

Synergistic relationships between Analytical Chemistry and written standards

International Nuclear Information System (INIS)

Valcárcel, Miguel; Lucena, Rafael

2013-01-01

Graphical abstract: -- Highlights: •Analytical Chemistry is influenced by international written standards. •Different relationships can be established between them. •Synergies can be generated when these standards are conveniently managed. -- Abstract: This paper describes the mutual impact of Analytical Chemistry and several international written standards (norms and guides) related to knowledge management (CEN-CWA 14924:2004), social responsibility (ISO 26000:2010), management of occupational health and safety (OHSAS 18001/2), environmental management (ISO 14001:2004), quality management systems (ISO 9001:2008) and requirements of the competence of testing and calibration laboratories (ISO 17025:2004). The intensity of this impact, based on a two-way influence, is quite different depending on the standard considered. In any case, a new and fruitful approach to Analytical Chemistry based on these relationships can be derived

Synergistic relationships between Analytical Chemistry and written standards

Energy Technology Data Exchange (ETDEWEB)

Valcárcel, Miguel, E-mail: qa1vacam@uco.es; Lucena, Rafael

2013-07-25

Graphical abstract: -- Highlights: •Analytical Chemistry is influenced by international written standards. •Different relationships can be established between them. •Synergies can be generated when these standards are conveniently managed. -- Abstract: This paper describes the mutual impact of Analytical Chemistry and several international written standards (norms and guides) related to knowledge management (CEN-CWA 14924:2004), social responsibility (ISO 26000:2010), management of occupational health and safety (OHSAS 18001/2), environmental management (ISO 14001:2004), quality management systems (ISO 9001:2008) and requirements of the competence of testing and calibration laboratories (ISO 17025:2004). The intensity of this impact, based on a two-way influence, is quite different depending on the standard considered. In any case, a new and fruitful approach to Analytical Chemistry based on these relationships can be derived.

Systematic review: work-related stress and the HSE management standards.

Science.gov (United States)

Brookes, K; Limbert, C; Deacy, C; O'Reilly, A; Scott, S; Thirlaway, K

2013-10-01

The Health and Safety Executive (HSE) has defined six management standards representing aspects of work that, if poorly managed, are associated with lower levels of employee health and productivity, and increased sickness absence. The HSE indicator tool aims to measure organizations' performance in managing the primary stressors identified by the HSE management standards. The aims of the study are to explore how the HSE indicator tool has been implemented within organizations and to identify contexts in which the tool has been used, its psychometric properties and relationships with alternative measures of well-being and stress. Studies that matched specific criteria were included in the review. Abstracts were considered by two researchers to ensure a reliable process. Full texts were obtained when abstracts met the inclusion criteria. Thirteen papers were included in the review. Using factor analysis and measures of reliability, the studies suggest that the HSE indicator tool is a psychometrically sound measure. The tool has been used to measure work-related stress across different occupational groups, with a clear relationship between the HSE tool and alternative measures of well-being. Limitations of the tool and recommendations for future research are discussed. The HSE indicator tool is a psychometrically sound measure of organizational performance against the HSE management standards. As such it can provide a broad overview of sources of work-related stress within organizations. More research is required to explore the use of the tool in the design of interventions to reduce stress, and its use in different contexts and with different cultural and gender groups.

Interest rate derivatives

DEFF Research Database (Denmark)

Svenstrup, Mikkel

This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered.......This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered....

The Distance Standard Deviation

OpenAIRE

Edelmann, Dominic; Richards, Donald; Vogel, Daniel

2017-01-01

The distance standard deviation, which arises in distance correlation analysis of multivariate data, is studied as a measure of spread. New representations for the distance standard deviation are obtained in terms of Gini's mean difference and in terms of the moments of spacings of order statistics. Inequalities for the distance variance are derived, proving that the distance standard deviation is bounded above by the classical standard deviation and by Gini's mean difference. Further, it is ...

A natural pharma standard supplement formulation to control treatment-related toxicity and oxidative stress in genitourinary cancer: a preliminary study.

Science.gov (United States)

Ledda, A; Belcaro, G; Dugall, M; Luzzi, R; Hosoi, M; Feragalli, B; Cotellese, R; Cosentino, V; Cosentino, M; Eggenhoffner, R; Pellizzato, M; Fratter, A; Giacomelli, L

2017-09-01

Oncological treatments are associated with toxicities that may decrease compliance to treatment in most genitourinary cancer patients. Supplementation with pharmaceutical-standardized supplement may be a supplementary method to control the side effects after chemo- and radiotherapy and the increased oxidative stress associated to treatments. This registry study evaluated a natural combination of supplements containing curcumin, cordyceps, and astaxanthin (Oncotris™) used as supplementary management in genitourinary cancer patients who had undergone oncological therapy. Patients with genitourinary cancers (prostate or bladder malignancies) who had undergone and completed cancer treatments (radiotherapy, chemotherapy or intravesical immunotherapy with increased oxidative stress and residual symptoms) were recruited in this registry, supplement study. Registry subjects (n = 61) freely decided to follow either a standard management (SM) (control group = 35) or SM plus oral daily supplementation (supplement group = 26). Evaluation of severity of treatment-related residual side effects, blood count test, prostate-specific antigen (PSA) test and plasma free radicals (oxidative stress) were performed at inclusion and at the end of the observational period (6 weeks). Two patients dropped out during the registry. Therefore, the analysis included 59 participants: 26 individuals in the supplementation group and 33 in the control group. In the supplement group, the intensity of signs and symptoms (treatment-related) and residual side effects significantly decreased at 6 weeks: minimal changes were observed in controls. Supplementation with Oncotris™ was associated with a significant improvement in blood cell count and with a decreased level of plasmatic PSA and oxidative stress. Naturally-derived supplements, specifically Oncotris™ (patent pending), could support the body to overcome the treatment-related toxicities - and the relative oxidative stress in cancer patients.

Changes in IEC standards related to diagnostic radiology

International Nuclear Information System (INIS)

Porubszky, T.; Barsai, J.

2007-01-01

Complete test of publication follows. Purposes. Technical Committee TC62 of International Electrotechnical Commission (IEC) deals with medical electrical equipment (i.e. medical devices using electricity). Standardization concerning diagnostic radiology equipment is task of its Sub-Committee SC62B. An outlook of its activities and present situation, and especially of radiation protection aspects, is given. Materials and methods. Third edition of basic safety standard for medical electrical equipment IEC 60601-1 was issued in 2005. Elaboration of new collateral and particular standards - applicable together with it - is in progress. These standards are generally at the same time also European - EN - and national standards. There is a great importance of radiation protection in diagnostic X-ray equipment. Collateral standard IEC 6060-1-3 about it was at first issued in 1994. Rapid development of imaging technology demands updating of requirements. SC62B in 2003 founded a maintenance team MT37 for preparation of the second edition of this standard. According to new safety philosophy of IEC all modality specific requirements are to be collected in 'safety and essential performance' particular standards. A new working group WG42 - founded in 2006 - elaborates a new particular standard IEC 60601-2-54 for radiographic and radioscopic equipment. Maintenance team MT32 deals with safety and performance standards for X-ray tube assemblies. The authors actively participate in these activities. Results and discussion. Present and future system of diagnostic radiology IEC standards and some interesting details are presented. Conclusions. International standards - although they are not 'obligatory' - are generally the basis of safety and performance certification of diagnostic radiology equipment and often also of their quality assurance.

Axiomatic derivation of Feynman rules and related topics

International Nuclear Information System (INIS)

Dorfmeister, G.K.

1992-01-01

Previous results in axiomatic field theory by Steinmann and Epstein-Glaser establish the existence of the retarded and time ordered Green's functions in every order of perturbation. To connect these Green's functions with the ones calculated in canonical field theories via the Feynman rules, one has to consistently build them not just for every order of perturbation but for each specific graph. (open-quotes Consisentlyclose quotes means here that the Green functions associated with two open-quotes smallclose quotes graphs build up to the Green's functions of the open-quotes bigclose quotes graph formed by connecting the two open-quotes smallclose quotes ones). This paper shows that this can indeed be done; that in this sense the Feynman rules of perturbative Lagrangian field theory can be derived from the abstract, but physically very basic, principles of axiomatic field theory. All results hold only for massive field theories. The LSZ formalism, to the best knowledge of the author, has so far not been modified to admit mass zero fields. To make the representation simpler and more transparent, the author restricts the discussion to a single component, scalar Φ 4 interaction which is a part of the Standard Model of Particle Physics. Motivated by its role in particle physics, the author complements the perturbative study of Φ 4 -theory by reviewing the status of non-perturbative solutions to the theory in the final chapter

Determine equilibrium dissociation constant of drug-membrane receptor affinity using the cell membrane chromatography relative standard method.

Science.gov (United States)

Ma, Weina; Yang, Liu; Lv, Yanni; Fu, Jia; Zhang, Yanmin; He, Langchong

2017-06-23

The equilibrium dissociation constant (K D ) of drug-membrane receptor affinity is the basic parameter that reflects the strength of interaction. The cell membrane chromatography (CMC) method is an effective technique to study the characteristics of drug-membrane receptor affinity. In this study, the K D value of CMC relative standard method for the determination of drug-membrane receptor affinity was established to analyze the relative K D values of drugs binding to the membrane receptors (Epidermal growth factor receptor and angiotensin II receptor). The K D values obtained by the CMC relative standard method had a strong correlation with those obtained by the frontal analysis method. Additionally, the K D values obtained by CMC relative standard method correlated with pharmacological activity of the drug being evaluated. The CMC relative standard method is a convenient and effective method to evaluate drug-membrane receptor affinity. Copyright © 2017 Elsevier B.V. All rights reserved.

Relating Standardized Visual Perception Measures to Simulator Visual System Performance

Science.gov (United States)

Kaiser, Mary K.; Sweet, Barbara T.

2013-01-01

Human vision is quantified through the use of standardized clinical vision measurements. These measurements typically include visual acuity (near and far), contrast sensitivity, color vision, stereopsis (a.k.a. stereo acuity), and visual field periphery. Simulator visual system performance is specified in terms such as brightness, contrast, color depth, color gamut, gamma, resolution, and field-of-view. How do these simulator performance characteristics relate to the perceptual experience of the pilot in the simulator? In this paper, visual acuity and contrast sensitivity will be related to simulator visual system resolution, contrast, and dynamic range; similarly, color vision will be related to color depth/color gamut. Finally, we will consider how some characteristics of human vision not typically included in current clinical assessments could be used to better inform simulator requirements (e.g., relating dynamic characteristics of human vision to update rate and other temporal display characteristics).

How Real Detector Thresholds Create False Standard Candles

International Nuclear Information System (INIS)

Shahmoradi, Amir; Nemiroff, Robert

2009-01-01

GRB satellites are relatively inefficient detectors of dim hard bursts. For example, given two bursts of identical peak luminosity near the detection threshold, a dim soft burst will be preferentially detected over a dim hard burst. This means that a high E peak burst will need a higher peak luminosity to be detected than a low E peak GRB. This purely detector-created attribute will appear as a correlation between E peak and luminosity, and should not be interpreted as a real standard candle effect. This result derives from Monte Carlo simulations utilizing a wide range of initial GRB spectra, and retriggering to create a final ''detected'' sample. In sum, E peak is not a good standard candle, and its appearance as such in seeming correlations such as the Amati and other L iso vs. E peak relations is likely a ghost of real energy-related detection thresholds.

Adolescents' Motivation for Reading: Group Differences and Relation to Standardized Achievement

Science.gov (United States)

Wolters, Christopher A.; Denton, Carolyn A.; York, Mary J.; Francis, David J.

2014-01-01

The purpose of this study was to extend the research on adolescents' motivation for reading by examining important group differences and the relation of motivation to standardized achievement. Adolescents (N = 406) ranging from grade 7 to grade 12 completed a self-report survey that assessed 13 different aspects of their reading motivation…

Standard guide for corrosion-related failure analysis

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This guide covers key issues to be considered when examining metallic failures when corrosion is suspected as either a major or minor causative factor. 1.2 Corrosion-related failures could include one or more of the following: change in surface appearance (for example, tarnish, rust, color change), pin hole leak, catastrophic structural failure (for example, collapse, explosive rupture, implosive rupture, cracking), weld failure, loss of electrical continuity, and loss of functionality (for example, seizure, galling, spalling, swelling). 1.3 Issues covered include overall failure site conditions, operating conditions at the time of failure, history of equipment and its operation, corrosion product sampling, environmental sampling, metallurgical and electrochemical factors, morphology (mode) or failure, and by considering the preceding, deducing the cause(s) of corrosion failure. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibili...

Collectivism versus individualism: performance-related pay and union coverage for non-standard workers in Britain

OpenAIRE

Booth, Alison L.; Francesconi, Marco

2000-01-01

This paper documents the extent of union coverage and performance-related pay (PRP) - the latter representing one aspect of pay flexibility - across standard and non-standard workers in Britain, using the first seven waves of the British Household Panel Survey, 1991-1997. We find there is no evidence of expansion of either union coverage or PRP towards any type of non-standard employment in the 1990s. Thus union rhetoric about a 'strategy of enlargement' towards non-standard workers remains j...

Derivative criteria of plasticity anddurability of metal materials

Directory of Open Access Journals (Sweden)

Gustov Yuriy Ivanovich

Full Text Available Criteria of plasticity and durability derivative of standard indicators of plasticity (δ, ψ and durability (σ , σ are offered. Criteria К and К follow from the equation of relative indicators of durability and plasticity. The purpose of the researches is the establishment of interrelation of derivative criteria with the Page indicator. The values of derivative criteria were defined for steels 50X and 50XH after processing by cold, and also for steels 50G2 and 38HGN after sorbitizing. It was established that the sum of the offered derivative criteria of plasticity and durability С considered for the steels is almost equal to unit and corresponds to a square root of relative durability and plasticity criterion C . Both criteria testify to two-unity opposite processes of deformation and resistance to deformation. By means of the equations for S and С it is possible to calculate an indicator of uniform plastic deformation of σ and through it to estimate synergetic criteria - true tension and specific energy of deformation and destruction of metal materials. On the basis of the received results the expressions for assessing the uniform and concentrated components of plastic deformation are established. The preference of the dependence of uniform relative lengthening from a cubic root of criterion К , and also to work of the criteria of relative lengthening and relative durability is given. The advantage of the formulas consists in simplicity and efficiency of calculation, in ensuring necessary accuracy of calculation of the size δ for the subsequent calculation of structural and power (synergetic criteria of reliability of metals.

106-17 Telemetry Standards Front Matter

Science.gov (United States)

2017-07-01

Frequency Division Multiplexing Telemetry Standards CHAPTER 4: Pulse Code Modulation Standards CHAPTER 5: Digitized Audio Telemetry Standard CHAPTER 6...Transfer Standard Chapter 9, Appendix 9-A Appendix I, Telemetry Attributes Transfer Standard Cover Sheet Chapter 9, Appendix 9-B Telemetry Standards...Derived Parameter Specification Chapter 9, Appendix 9-E Appendix Q, Extended Binary Golay Code Chapter 7, Appendix 7-A Appendix R, Low-Density Parity

Analysing public relations education through international standards: The Portuguese case

OpenAIRE

Gonçalves, Gisela Marques Pereira; Spínola, Susana de Carvalho; Padamo, Celma

2013-01-01

By using international reports on PR education as a benchmark we analyse the status of PR higher education in Portugal. Despite differences among the study programs, the findings reveal that the standard five courses recommendation by the Commission on Public Relations Education (CPRE) are a part of Portuguese undergraduate curriculum. This includes 12 of the 14 content field guidelines needed to achieve the ideal master's program. Data shows, however, the difficulty of positioning public rel...

The brain-derived neurotrophic factor Val66Met polymorphism is associated with age-related change in reasoning skills.

Science.gov (United States)

Harris, S E; Fox, H; Wright, A F; Hayward, C; Starr, J M; Whalley, L J; Deary, I J

2006-05-01

A polymorphism (Val66Met) in the gene encoding brain-derived neurotrophic factor (BDNF) has previously been associated with impaired hippocampal function and scores on the Logical Memory subtest of the Wechsler Memory Scale-Revised (WMS-R). Despite its widespread expression in the brain, there have been few studies examining the role of BDNF on cognitive domains, other than memory. We examined the association between BDNF Val66Met genotype and non-verbal reasoning, as measured by Raven's standard progressive matrices (Raven), in two cohorts of relatively healthy older people, one aged 79 (LBC1921) and the other aged 64 (ABC1936) years. LBC1921 and ABC1936 subjects had reasoning measured at age 11 years, using the Moray House Test (MHT), in the Scottish Mental Surveys of 1932 and 1947, respectively. BDNF genotype was significantly associated with later life Raven scores, controlling for sex, age 11 MHT score and cohort (P = 0.001). MHT, Verbal Fluency and Logical Memory scores were available, in later life, for LBC1921 only. BDNF genotype was significantly associated with age 79 MHT score, controlling for sex and age 11 MHT score (P = 0.016). In both significant associations, Met homozygotes scored significantly higher than heterozygotes and Val homozygotes. This study indicates that BDNF genotype contributes to age-related changes in reasoning skills, which are closely related to general intelligence.

Gorenstein derived functions

DEFF Research Database (Denmark)

Holm, Henrik Granau

2004-01-01

Over any associative ring R it is standard to derive HomR(􀀀;􀀀) using projective resolutions in the rst variable, or injective resolutions in the second variable, and doing this, one obtains Extn R(􀀀;􀀀) in both cases. We examine the situation where projective...... and injective modules are replaced by Gorenstein projective and Gorenstein injective ones, respectively. Furthermore, we derive the tensor product 􀀀 R 􀀀 using Gorenstein at modules....

Synthesis of 2-phosphaadamantane derivatives

International Nuclear Information System (INIS)

Zemlyanoi, V.N.; Aleksandrov, A.M.; Kukhar', V.P.

1986-01-01

The authors describe the synthesis and properties of 2-phosphadamantane derivatives. For the synthesis of 2-phosphaadamantane derivatives they decided to use the methodology of the synthesis of 2-thiaadamantane. The IR spectra were determined on CHCl 3 solutions with a Specord 711R spectrometer, the PMR spectra were determined on Tesla BS-467 (60 MHz) and Bruker WP-200 (200 MHz) spectrometers, external standard hexamethyldisiloxane, the 31 P NMR spectra were determined on Tesla BS-487 C (30 MHz) and Bruker WP-200 (81 MHz) spectrometers, external standard 85% phosphoric acid, and the mass spectra were determined on an MS-1302 spectrometer

Synergistic relationships between Analytical Chemistry and written standards.

Science.gov (United States)

Valcárcel, Miguel; Lucena, Rafael

2013-07-25

This paper describes the mutual impact of Analytical Chemistry and several international written standards (norms and guides) related to knowledge management (CEN-CWA 14924:2004), social responsibility (ISO 26000:2010), management of occupational health and safety (OHSAS 18001/2), environmental management (ISO 14001:2004), quality management systems (ISO 9001:2008) and requirements of the competence of testing and calibration laboratories (ISO 17025:2004). The intensity of this impact, based on a two-way influence, is quite different depending on the standard considered. In any case, a new and fruitful approach to Analytical Chemistry based on these relationships can be derived. Copyright © 2013 Elsevier B.V. All rights reserved.

Relationship between LiDAR-derived forest canopy height and Landsat images

Science.gov (United States)

Cristina Pascual; Antonio Garcia-Abril; Warren B. Cohen; Susana. Martin-Fernandez

2010-01-01

The mean and standard deviation (SD) of light detection and ranging (LiDAR)-derived canopy height are related to forest structure. However, LiDAR data typically cover a limited area and have a high economic cost compared with satellite optical imagery. Optical images may be required to extrapolate LiDAR height measurements across a broad landscape. Different spectral...

Loss of life expectancy derived from a standardized mortality ratio in Denmark, Finland, Norway and Sweden.

Science.gov (United States)

Skriver, Mette Vinther; Væth, Michael; Støvring, Henrik

2018-01-01

The standardized mortality ratio (SMR) is a widely used measure. A recent methodological study provided an accurate approximate relationship between an SMR and difference in lifetime expectancies. This study examines the usefulness of the theoretical relationship, when comparing historic mortality data in four Scandinavian populations. For Denmark, Finland, Norway and Sweden, data on mortality every fifth year in the period 1950 to 2010 were obtained. Using 1980 as the reference year, SMRs and difference in life expectancy were calculated. The assumptions behind the theoretical relationship were examined graphically. The theoretical relationship predicts a linear association with a slope, [Formula: see text], between log(SMR) and difference in life expectancies, and the theoretical prediction and calculated differences in lifetime expectancies were compared. We examined the linear association both for life expectancy at birth and at age 30. All analyses were done for females, males and the total population. The approximate relationship provided accurate predictions of actual differences in lifetime expectancies. The accuracy of the predictions was better when age was restricted to above 30, and improved if the changes in mortality rate were close to a proportional change. Slopes of the linear relationship were generally around 9 for females and 10 for males. The theoretically derived relationship between SMR and difference in life expectancies provides an accurate prediction for comparing populations with approximately proportional differences in mortality, and was relatively robust. The relationship may provide a useful prediction of differences in lifetime expectancies, which can be more readily communicated and understood.

Neutron activation analysis of reference materials by the k sub 0 standardization and relative methods

Energy Technology Data Exchange (ETDEWEB)

Freitas, M C; Martinho, E [LNETI/ICEN, Sacavem (Portugal)

1989-04-15

Instrumental neutron activation analysis with the k{sub o}-standardization method was applied to eight geological, environmental and biological reference materials, including leaves, blood, fish, sediments, soils and limestone. To a first approximation, the results were normally distributed around the certified values with a standard deviation of 10%. Results obtained by using the relative method based on well characterized multi-element standards for IAEA CRM Soil-7 are reported.

RDA: a content standard to ensure the quality of data

Directory of Open Access Journals (Sweden)

Carlo Bianchini

2016-05-01

Full Text Available RDA Resource Description and Access are guidelines for description and access to resources designed for digital environment and released, in its first version, in 2010. RDA is based on FRBR and its derived models, that focus on users’ needs and on resources of any kind of content, medium and carrier.  The paper discusses relevance of main features of RDA for the future role of libraries in the context of semantic web and metadata creation and exchange. The paper aims to highlight many consequences deriving from RDA being a content standard, and in particular the change from record management to data management, differences among the two functions realized by RDA (to identify and to relate entities and functions realized by other standard such as MARC21 (to archive data and ISB (to visualize data and show how, as all these functions are necessary for the catalog, RDA needs to be integrated by other rules and standard and that these tools allow the fulfilment of the variation principle defined by S.R. Ranganathan.

Darwin Core: An Evolving Community-Developed Biodiversity Data Standard

Science.gov (United States)

Wieczorek, John; Bloom, David; Guralnick, Robert; Blum, Stan; Döring, Markus; Giovanni, Renato; Robertson, Tim; Vieglais, David

2012-01-01

Biodiversity data derive from myriad sources stored in various formats on many distinct hardware and software platforms. An essential step towards understanding global patterns of biodiversity is to provide a standardized view of these heterogeneous data sources to improve interoperability. Fundamental to this advance are definitions of common terms. This paper describes the evolution and development of Darwin Core, a data standard for publishing and integrating biodiversity information. We focus on the categories of terms that define the standard, differences between simple and relational Darwin Core, how the standard has been implemented, and the community processes that are essential for maintenance and growth of the standard. We present case-study extensions of the Darwin Core into new research communities, including metagenomics and genetic resources. We close by showing how Darwin Core records are integrated to create new knowledge products documenting species distributions and changes due to environmental perturbations. PMID:22238640

Surface metal standards produced by ion implantation through a removable layer

International Nuclear Information System (INIS)

Schueler, B.W.; Granger, C.N.; McCaig, L.; McKinley, J.M.; Metz, J.; Mowat, I.; Reich, D.F.; Smith, S.; Stevie, F.A.; Yang, M.H.

2003-01-01

Surface metal concentration standards were produced by ion implantation and investigated for their suitability to calibrate surface metal measurements by secondary ion mass spectrometry (SIMS). Single isotope implants were made through a 100 nm oxide layer on silicon. The implant energies were chosen to place the peak of the implanted species at a depth of 100 nm. Subsequent removal of the oxide layer was used to expose the implant peak and to produce controlled surface metal concentrations. Surface metal concentration measurements by time-of-flight SIMS (TOF-SIMS) with an analysis depth of 1 nm agreed with the expected surface concentrations of the implant standards with a relative mean standard deviation of 20%. Since the TOF-SIMS relative sensitivity factors (RSFs) were originally derived from surface metal measurements of surface contaminated silicon wafers, the agreement implies that the implant standards can be used to measure RSF values. The homogeneity of the surface metal concentration was typically <10%. The dopant dose remaining in silicon after oxide removal was measured using the surface-SIMS protocol. The measured implant dose agreed with the expected dose with a mean relative standard deviation of 25%

Challenging the 3.0 GPA Eligibility Standard for Public Relations Internships.

Science.gov (United States)

Maynard, Michael L.

1999-01-01

Analyzes the appropriateness of a 3.0 GPA standard for public relations internship eligibility at one university. Seeks to determine at what GPA cutoff faculty can feel confident that the student will gain from the internship without damaging the program's reputation. Finds students with a 2.7 GPA did as well as students with GPAs ranging from 3.0…

Relationship between non-standard work arrangements and work-related accident absence in Belgium.

Science.gov (United States)

Alali, Hanan; Braeckman, Lutgart; Van Hecke, Tanja; De Clercq, Bart; Janssens, Heidi; Wahab, Magd Abdel

2017-03-28

The main objective of this study is to examine the relationship between indicators of non-standard work arrangements, including precarious contract, long working hours, multiple jobs, shift work, and work-related accident absence, using a representative Belgian sample and considering several socio-demographic and work characteristics. This study was based on the data of the fifth European Working Conditions Survey (EWCS). For the analysis, the sample was restricted to 3343 respondents from Belgium who were all employed workers. The associations between non-standard work arrangements and work-related accident absence were studied with multivariate logistic regression modeling techniques while adjusting for several confounders. During the last 12 months, about 11.7% of workers were absent from work because of work-related accident. A multivariate regression model showed an increased injury risk for those performing shift work (OR 1.546, 95% CI 1.074-2.224). The relationship between contract type and occupational injuries was not significant (OR 1.163, 95% CI 0.739-1.831). Furthermore, no statistically significant differences were observed for those performing long working hours (OR 1.217, 95% CI 0.638-2.321) and those performing multiple jobs (OR 1.361, 95% CI 0.827-2.240) in relation to work-related accident absence. Those who rated their health as bad, low educated workers, workers from the construction sector, and those exposed to biomechanical exposure (BM) were more frequent victims of work-related accident absence. No significant gender difference was observed. Indicators of non-standard work arrangements under this study, except shift work, were not significantly associated with work-related accident absence. To reduce the burden of occupational injuries, not only risk reduction strategies and interventions are needed but also policy efforts are to be undertaken to limit shift work. In general, preventive measures and more training on the job are needed to

THE MID-INFRARED PERIOD-LUMINOSITY RELATIONS FOR THE SMALL MAGELLANIC CLOUD CEPHEIDS DERIVED FROM SPITZER ARCHIVAL DATA

International Nuclear Information System (INIS)

Ngeow, Chow-Choong; Kanbur, Shashi M.

2010-01-01

In this paper, we derive the Spitzer IRAC band period-luminosity (P-L) relations for the Small Magellanic Cloud (SMC) Cepheids, by matching the Spitzer archival SAGE-SMC data with the OGLE-III SMC Cepheids. We find that the 3.6 μm and 4.5 μm band P-L relations can be better described using two P-L relations with a break period at log(P) = 0.4: this is consistent with similar results at optical wavelengths for SMC P-L relations. The 5.8 μm and 8.0 μm band P-L relations do not extend to sufficiently short periods to enable a similar detection of a slope change at log(P) = 0.4. The slopes of the SMC P-L relations, for log(P) > 0.4, are consistent with their Large Magellanic Cloud counterparts that were derived from a similar data set. They are also in agreement with those obtained from a small sample of Galactic Cepheids with parallax measurements.

Reducing matrix effect error in EDXRF: Comparative study of using standard and standard less methods for stainless steel samples

International Nuclear Information System (INIS)

Meor Yusoff Meor Sulaiman; Masliana Muhammad; Wilfred, P.

2013-01-01

Even though EDXRF analysis has major advantages in the analysis of stainless steel samples such as simultaneous determination of the minor elements, analysis can be done without sample preparation and non-destructive analysis, the matrix issue arise from the inter element interaction can make the the final quantitative result to be in accurate. The paper relates a comparative quantitative analysis using standard and standard less methods in the determination of these elements. Standard method was done by plotting regression calibration graphs of the interested elements using BCS certified stainless steel standards. Different calibration plots were developed based on the available certified standards and these stainless steel grades include low alloy steel, austenitic, ferritic and high speed. The standard less method on the other hand uses a mathematical modelling with matrix effect correction derived from Lucas-Tooth and Price model. Further improvement on the accuracy of the standard less method was done by inclusion of pure elements into the development of the model. Discrepancy tests were then carried out for these quantitative methods on different certified samples and the results show that the high speed method is most reliable for determining of Ni and the standard less method for Mn. (Author)

Implementation problem for the canonical commutation relation in terms of quantum white noise derivatives

International Nuclear Information System (INIS)

Ji, Un Cig; Obata, Nobuaki

2010-01-01

The implementation problem for the canonical commutation relation is reduced to a system of differential equations for Fock space operators containing new type of derivatives. We solve these differential equations systematically by means of quantum white noise calculus, and obtain the solution to the implementation problem.

Experimental thermochemical study of fluoro-, chloro-, and bromo-derivatives of uracil

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Amaral, Luísa M.P.F.; Szterner, Piotr

2012-01-01

Highlights: ► Combustion calorimetry was used to determine Δ f H m ∘ (cr) of halo derivatives of uracil. ► Gas-phase Δ f H m ∘ of the studied compounds have been derived. ► The influence of the halogen atoms on the enthalpic stability of the halo-uracils is discussed. - Abstract: The values of the standard molar enthalpies of formation, of 5-fluorouracil, 5-chlorouracil, 5-bromouracil, and 6-chlorouracil, in the crystalline phase, at T = 298.15 K, were derived from the standard massic energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The combination of the derived values of the standard molar enthalpies of formation, in the crystalline phase, and the literature values of the standard molar enthalpies of sublimation, allowed the calculation of the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, which are interpreted in terms of the influence of the halogen atoms upon the enthalpic stability of the halogen derivatives of uracil.

Determination of gadolinium by the method of derivative spectrophotometry

International Nuclear Information System (INIS)

Aleksandrova, N.N.; Mishchenko, V.T.; Poluehktov, N.S.; Mukomel', V.L.

1988-01-01

Technique for gadolinium determination at the presence of interfering rare earth elements, which is based on the derivative spectrophotometry method, is suggested. The technique is of increased selectivity and allows to determine gadolinium in the mixtures with elements, which presence in solution makes impossible to determine gadolinium directly. At binary mixtures analysis Sr relative standard deviation does not exceed 0.03, while at the analysis of more complex mixtures Sr increases up to 0.06

Relative stability of radicals derived from artemisinin: A semiempirical and DFT study

Science.gov (United States)

Arantes, C.; de Araujo, M. T.; Taranto, A. G.; de M. Carneiro, J. W.

The semiempirical AM1 and PM3 methods, as well as the density functional (DFT/B3LYP) approach using the 6-31g(d) basis set, were employed to calculate the relative stability of intermediate radicals derived from artemisinin, a sesquiterpene lactone having an endoperoxide bridge that is essential for its antimalarial activity. The compounds studied have their nonperoxidic oxygen atom of the trioxane ring and/or the carbonyl group replaced by a CH2 unit. Relative stabilities were calculated by means of isodesmic equations using artemisinin as reference. It was found that replacement of oxygen atoms decreases the relative stability of the anionic radical intermediates. In contrast, for compounds with inverted stereochemistry the intermediate radicals were found to be more stable than those with the artemisinin-like stereochemistry. These relative stabilities may modulate the antimalarial potency. Radicals centered on carbon are always more stable than the corresponding radicals centered on oxygen.

On categorical approach to derived preference relations in some decision making problems

OpenAIRE

Rozen, Victor V.; Zhitomirski, Grigori

2005-01-01

A structure called a decision making problem is considered. The set of outcomes (consequences) is partially ordered according to the decision maker's preferences. The problem is how these preferences affect a decision maker to prefer one of his strategies (or acts) to another, i.e. it is to describe so called derived preference relations. This problem is formalized by using category theory approach and reduced to a pure algebraical question. An effective method is suggested to build all reaso...

The Standardization Method of Address Information for POIs from Internet Based on Positional Relation

Directory of Open Access Journals (Sweden)

WANG Yong

2016-05-01

Full Text Available As points of interest (POIon the internet, exists widely incomplete addresses and inconsistent literal expressions, a fast standardization processing method of network POIs address information based on spatial constraints was proposed. Based on the model of the extensible address expression, first of all, address information of POI was segmented and extracted. Address elements are updated by means of matching with the address tree layer by layer. Then, by defining four types of positional relations, corresponding set are selected from standard POI library as candidate for enrichment and amendment of non-standard address. At last, the fast standardized processing of POI address information was achieved with the help of backtracking address elements with minimum granularity. Experiments in this paper proved that the standardization processing of an address can be realized by means of this method with higher accuracy in order to build the address database.

Relationship between different approaches to derive weighting functions related to atmospheric remote sensing problems

International Nuclear Information System (INIS)

Rozanov, Vladimir V.; Rozanov, Alexei V.

2007-01-01

The paper is devoted to the investigation of the relationship between different methods used to derive weighting functions required to solve numerous inverse problems related to the remote sensing of the Earth's atmosphere by means of scattered solar light observations. The first method commonly referred to as the forward-adjoint approach is based on a joint solution of the forward and adjoint radiative transfer equations and the second one requires the linearized forward radiative transfer equation to be solved. In the framework of the forward-adjoint method we consider two approaches commonly used to derive the weighting functions. These approaches are referenced as the 'response function' and the 'formal solution' techniques, respectively. We demonstrate here that the weighting functions derived employing the formal solution technique can also be obtained substituting the analytical representations for the direct forward and direct adjoint intensities into corresponding expressions obtained in the framework of the response function technique. The advantages and disadvantages of different techniques are discussed

45 CFR 1630.12 - Applicability to derivative income.

Science.gov (United States)

2010-10-01

..., regulations, guidelines, and instructions, the Accounting Guide for LSC recipients, the terms and conditions... 45 Public Welfare 4 2010-10-01 2010-10-01 false Applicability to derivative income. 1630.12... CORPORATION COST STANDARDS AND PROCEDURES § 1630.12 Applicability to derivative income. (a) Derivative income...

The Potential of Chitosan and Its Derivatives in Prevention and Treatment of Age-Related Diseases

Science.gov (United States)

Kerch, Garry

2015-01-01

Age-related, diet-related and protein conformational diseases, such as atherosclerosis, diabetes mellitus, cancer, hypercholesterolemia, cardiovascular and neurodegenerative diseases are common in the elderly population. The potential of chitosan, chitooligosaccharides and their derivatives in prevention and treatment of age-related dysfunctions is reviewed and discussed in this paper. The influence of oxidative stress, low density lipoprotein oxidation, increase of tissue stiffness, protein conformational changes, aging-associated chronic inflammation and their pathobiological significance have been considered. The chitosan-based functional food also has been reviewed. PMID:25871293

The Scalable Coherent Interface and related standards projects

International Nuclear Information System (INIS)

Gustavson, D.B.

1991-09-01

The Scalable Coherent Interface (SCI) project (IEEE P1596) found a way to avoid the limits that are inherent in bus technology. SCI provides bus-like services by transmitting packets on a collection of point-to-point unidirectional links. The SCI protocols support cache coherence in a distributed-shared-memory multiprocessor model, message passing, I/O, and local-area-network-like communication over fiber optic or wire links. VLSI circuits that operate parallel links at 1000 MByte/s and serial links at 1000 Mbit/s will be available early in 1992. Several ongoing SCI-related projects are applying the SCI technology to new areas or extending it to more difficult problems. P1596.1 defines the architecture of a bridge between SCI and VME; P1596.2 compatibly extends the cache coherence mechanism for efficient operation with kiloprocessor systems; P1596.3 defines new low-voltage (about 0.25 V) differential signals suitable for low power interfaces for CMOS or GaAs VLSI implementations of SCI; P1596.4 defines a high performance memory chip interface using these signals; P1596.5 defines data transfer formats for efficient interprocessor communication in heterogeneous multiprocessor systems. This paper reports the current status of SCI, related standards, and new projects. 16 refs

A class of constitutive relations with internal variable derivatives. Derivation from homogenization and initial value problem

International Nuclear Information System (INIS)

Andrieux, S.; Joussemet, M.; Lorentz, E.

1996-01-01

A general framework for deriving and using a class of constitutive laws incorporating spatial gradients of internal variables is presented. It uses two basic ingredients: a derivation of such models by homogenization techniques and a reformulation of the evolution equation at the scale of the whole structure. (orig.)

Experimentally testing the standard cosmological model

Energy Technology Data Exchange (ETDEWEB)

Schramm, D.N. (Chicago Univ., IL (USA) Fermi National Accelerator Lab., Batavia, IL (USA))

1990-11-01

The standard model of cosmology, the big bang, is now being tested and confirmed to remarkable accuracy. Recent high precision measurements relate to the microwave background; and big bang nucleosynthesis. This paper focuses on the latter since that relates more directly to high energy experiments. In particular, the recent LEP (and SLC) results on the number of neutrinos are discussed as a positive laboratory test of the standard cosmology scenario. Discussion is presented on the improved light element observational data as well as the improved neutron lifetime data. alternate nucleosynthesis scenarios of decaying matter or of quark-hadron induced inhomogeneities are discussed. It is shown that when these scenarios are made to fit the observed abundances accurately, the resulting conclusions on the baryonic density relative to the critical density, {Omega}{sub b}, remain approximately the same as in the standard homogeneous case, thus, adding to the robustness of the standard model conclusion that {Omega}{sub b} {approximately} 0.06. This latter point is the deriving force behind the need for non-baryonic dark matter (assuming {Omega}{sub total} = 1) and the need for dark baryonic matter, since {Omega}{sub visible} < {Omega}{sub b}. Recent accelerator constraints on non-baryonic matter are discussed, showing that any massive cold dark matter candidate must now have a mass M{sub x} {approx gt} 20 GeV and an interaction weaker than the Z{sup 0} coupling to a neutrino. It is also noted that recent hints regarding the solar neutrino experiments coupled with the see-saw model for {nu}-masses may imply that the {nu}{sub {tau}} is a good hot dark matter candidate. 73 refs., 5 figs.

Experimentally testing the standard cosmological model

International Nuclear Information System (INIS)

Schramm, D.N.

1990-11-01

The standard model of cosmology, the big bang, is now being tested and confirmed to remarkable accuracy. Recent high precision measurements relate to the microwave background; and big bang nucleosynthesis. This paper focuses on the latter since that relates more directly to high energy experiments. In particular, the recent LEP (and SLC) results on the number of neutrinos are discussed as a positive laboratory test of the standard cosmology scenario. Discussion is presented on the improved light element observational data as well as the improved neutron lifetime data. alternate nucleosynthesis scenarios of decaying matter or of quark-hadron induced inhomogeneities are discussed. It is shown that when these scenarios are made to fit the observed abundances accurately, the resulting conclusions on the baryonic density relative to the critical density, Ω b , remain approximately the same as in the standard homogeneous case, thus, adding to the robustness of the standard model conclusion that Ω b ∼ 0.06. This latter point is the deriving force behind the need for non-baryonic dark matter (assuming Ω total = 1) and the need for dark baryonic matter, since Ω visible b . Recent accelerator constraints on non-baryonic matter are discussed, showing that any massive cold dark matter candidate must now have a mass M x approx-gt 20 GeV and an interaction weaker than the Z 0 coupling to a neutrino. It is also noted that recent hints regarding the solar neutrino experiments coupled with the see-saw model for ν-masses may imply that the ν τ is a good hot dark matter candidate. 73 refs., 5 figs

A hierarchical generalization of the acoustic reciprocity theorem involving higher-order derivatives and interaction quantities.

Science.gov (United States)

Lin, Ju; Li, Jie; Li, Xiaolei; Wang, Ning

2016-10-01

An acoustic reciprocity theorem is generalized, for a smoothly varying perturbed medium, to a hierarchy of reciprocity theorems including higher-order derivatives of acoustic fields. The standard reciprocity theorem is the first member of the hierarchy. It is shown that the conservation of higher-order interaction quantities is related closely to higher-order derivative distributions of perturbed media. Then integral reciprocity theorems are obtained by applying Gauss's divergence theorem, which give explicit integral representations connecting higher-order interactions and higher-order derivative distributions of perturbed media. Some possible applications to an inverse problem are also discussed.

Einstein in matrix form. Exact derivation of the theory of special and general relativity without tensors

Energy Technology Data Exchange (ETDEWEB)

Ludyk, Guenter [Bremen Univ. (Germany). Physics and Electrical Engineering

2013-11-01

Derives the fundamental equations of Einstein's theory of special and general relativity using matrix calculus, without the help of tensors. Provides necessary mathematical tools in a user-friendly way, either directly in the text or in the appendices. Appendices contain an introduction to classical dynamics as a refresher of known fundamental physics. Rehearses vector and matrix calculus, differential geometry, and some special solutions of general relativity in the appendices. This book is an introduction to the theories of Special and General Relativity. The target audience are physicists, engineers and applied scientists who are looking for an understandable introduction to the topic - without too much new mathematics. The fundamental equations of Einsteins theory of Special and General Relativity are derived using matrix calculus, without the help of tensors. This feature makes the book special and a valuable tool for scientists and engineers with no experience in the field of tensor calculus. In part I the foundations of Special Relativity are developed, part II describes the structure and principle of General Relativity. Part III explains the Schwarzschild solution of spherical body gravity and examines the ''Black Hole'' phenomenon. Any necessary mathematical tools are user friendly provided, either directly in the text or in the appendices.

Einstein in matrix form. Exact derivation of the theory of special and general relativity without tensors

International Nuclear Information System (INIS)

Ludyk, Guenter

2013-01-01

Derives the fundamental equations of Einstein's theory of special and general relativity using matrix calculus, without the help of tensors. Provides necessary mathematical tools in a user-friendly way, either directly in the text or in the appendices. Appendices contain an introduction to classical dynamics as a refresher of known fundamental physics. Rehearses vector and matrix calculus, differential geometry, and some special solutions of general relativity in the appendices. This book is an introduction to the theories of Special and General Relativity. The target audience are physicists, engineers and applied scientists who are looking for an understandable introduction to the topic - without too much new mathematics. The fundamental equations of Einsteins theory of Special and General Relativity are derived using matrix calculus, without the help of tensors. This feature makes the book special and a valuable tool for scientists and engineers with no experience in the field of tensor calculus. In part I the foundations of Special Relativity are developed, part II describes the structure and principle of General Relativity. Part III explains the Schwarzschild solution of spherical body gravity and examines the ''Black Hole'' phenomenon. Any necessary mathematical tools are user friendly provided, either directly in the text or in the appendices.

Small Bandwidth Asymptotics for Density-Weighted Average Derivatives

DEFF Research Database (Denmark)

Cattaneo, Matias D.; Crump, Richard K.; Jansson, Michael

This paper proposes (apparently) novel standard error formulas for the density-weighted average derivative estimator of Powell, Stock, and Stoker (1989). Asymptotic validity of the standard errors developed in this paper does not require the use of higher-order kernels and the standard errors...

Derivation of Building Energy Use Intensity Targets for ASHRAE Standard 100

Energy Technology Data Exchange (ETDEWEB)

Sharp, Terry R [ORNL

2014-06-01

The steps to develop the building energy use intensity targets for American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 100, Energy Efficiency in Existing Buildings are outlined in this report. The analyses were conducted by Oak Ridge National Laboratory (ORNL) in collaboration with the ASHRAE Standard 100 committee and Dr. Alexander Zhivov, the subcommittee chair responsible for targets development.

Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

Energy Technology Data Exchange (ETDEWEB)

Conover, David R.

2014-09-11

The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

Binary trading relations and the limits of EDI standards

DEFF Research Database (Denmark)

Damsgaard, Jan; Truex, D.

2000-01-01

This paper provides a critical examination of electronic data interchange (EDI) standards and their application in different types of trading relationships. It argues that EDI standards are not directly comparable to more stable sets of technical standards in that they are dynamically tested...... and negotiated in use with each trading exchange. It takes the position that EDI standards are an emergent language form and must mean different things at the institutional and local levels. Using the lens of emergent linguistic analysis it shows how the institutional and local levels must always be distinct...... and yet can coexist. EDI standards can never represent the creation of an 'Esperanto of institutional communication'. Instead we believe that standards must be developed such that they support and accommodate general basic grammatical forms that can be customised to individual needs. The analysis...

Activity and gamma-ray emission standards

International Nuclear Information System (INIS)

Debertin, K.

1983-01-01

The standards made available by PTB are standards defined with regard to their activity A. If standard and measuring sample do not contain the same nuclide, the comparison with the standard is made via the emission rate R of the photons of a given energy. For this comparison, the value recommended by PTB for PTB standards should be used, as this value in many cases has been derived by emission rate measurements on specimens whose activity has been directly correlated with the activity of the standards released. (orig./DG) [de

American National Standard: guidelines for evaluating site-related geotechnical parameters at nuclear power sites

International Nuclear Information System (INIS)

Anon.

1978-01-01

This standard presents guidelines for evaluating site-related geotechnical parameters for nuclear power sites. Aspects considered include geology, ground water, foundation engineering, and earthwork engineering. These guidelines identify the basic geotechnical parameters to be considered in site evaluation, and in the design, construction, and performance of foundations and earthwork aspects for nuclear power plants. Also included are tabulations of typical field and laboratory investigative methods useful in identifying geotechnical parameters. Those areas where interrelationships with other standards may exist are indicated

Review and comparison of WWER and LWR Codes and Standards

International Nuclear Information System (INIS)

Buckthorpe, D.; Tashkinov, A.; Brynda, J.; Davies, L.M.; Cueto-Felgeueroso, C.; Detroux, P.; Bieniussa, K.; Guinovart, J.

2003-01-01

The results of work on a collaborative project on comparison of Codes and Standards used for safety related components of the WWER and LWR type reactors is presented. This work was performed on behalf of the European Commission, Working Group Codes and Standards and considers areas such as rules, criteria and provisions, failure mechanisms , derivation and understanding behind the fatigue curves, piping, materials and aging, manufacturing and ISI. WWERs are essentially designed and constructed using the Russian PNAE Code together with special provisions in a few countries (e.g. Czech Republic) from national standards. The LWR Codes have a strong dependence on the ASME Code. Also within Western Europe other codes are used including RCC-M, KTA and British Standards. A comparison of procedures used in all these codes and standards have been made to investigate the potential for equivalencies between the codes and any grounds for future cooperation between eastern and western experts in this field. (author)

Association of yield-related traits in founder genotypes and derivatives of common wheat (Triticum aestivum L.

Directory of Open Access Journals (Sweden)

Jie Guo

2018-02-01

Full Text Available Abstract Background Yield improvement is an ever-important objective of wheat breeding. Studying and understanding the phenotypes and genotypes of yield-related traits has potential for genetic improvement of crops. Results The genotypes of 215 wheat cultivars including 11 founder parents and 106 derivatives were analyzed by the 9 K wheat SNP iSelect assay. A total of 4138 polymorphic single nucleotide polymorphism (SNP loci were detected on 21 chromosomes, of which 3792 were mapped to single chromosome locations. All genotypes were phenotyped for six yield-related traits including plant height (PH, spike length (SL, spikelet number per spike (SNPS, kernel number per spike (KNPS, kernel weight per spike (KWPS, and thousand kernel weight (TKW in six irrigated environments. Genome-wide association analysis detected 117 significant associations of 76 SNPs on 15 chromosomes with phenotypic explanation rates (R 2 ranging from 2.03 to 12.76%. In comparing allelic variation between founder parents and their derivatives (106 and other cultivars (98 using the 76 associated SNPs, we found that the region 116.0–133.2 cM on chromosome 5A in founder parents and derivatives carried alleles positively influencing kernel weight per spike (KWPS, rarely found in other cultivars. Conclusion The identified favorable alleles could mark important chromosome regions in derivatives that were inherited from founder parents. Our results unravel the genetic of yield in founder genotypes, and provide tools for marker-assisted selection for yield improvement.

The iMTA Productivity Cost Questionnaire: A Standardized Instrument for Measuring and Valuing Health-Related Productivity Losses.

Science.gov (United States)

Bouwmans, Clazien; Krol, Marieke; Severens, Hans; Koopmanschap, Marc; Brouwer, Werner; Hakkaart-van Roijen, Leona

2015-09-01

Productivity losses often contribute significantly to the total costs in economic evaluations adopting a societal perspective. Currently, no consensus exists on the measurement and valuation of productivity losses. We aimed to develop a standardized instrument for measuring and valuing productivity losses. A group of researchers with extensive experience in measuring and valuing productivity losses designed an instrument suitable for self-completion, building on preknowledge and evidence on validity. The instrument was designed to cover all domains of productivity losses, thus allowing quantification and valuation of all productivity losses. A feasibility study was performed to check the questionnaire's consistency and intelligibility. The iMTA Productivity Cost Questionnaire (iPCQ) includes three modules measuring productivity losses of paid work due to 1) absenteeism and 2) presenteeism and productivity losses related to 3) unpaid work. Questions for measuring absenteeism and presenteeism were derived from existing validated questionnaires. Because validated measures of losses of unpaid work are scarce, the questions of this module were newly developed. To enhance the instrument's feasibility, simple language was used. The feasibility study included 195 respondents (response rate 80%) older than 18 years. Seven percent (n = 13) identified problems while filling in the iPCQ, including problems with the questionnaire's instructions and routing (n = 6) and wording (n = 2). Five respondents experienced difficulties in estimating the time that would be needed for other people to make up for lost unpaid work. Most modules of the iPCQ are based on validated questions derived from previously available instruments. The instrument is understandable for most of the general public. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Trade, Development, and the Political Economy of Public Standards

OpenAIRE

Swinnen, Johan F.M.; Vandemoortele, Thijs

2009-01-01

This paper presents a political economy model of public standards in an open economy model. We use the model to derive the political optimum and to analyze different factors that have an influence on this political equilibrium. The paper discusses how the level of development influences the political equilibrium. We also analyze the relation between trade and the political equilibrium and compare this political outcome with the social optimum to identify under which cases ‘under-standardizati...

Adipocyte-derived factors in age-related dementia and their contribution to vascular and Alzheimer pathology.

Science.gov (United States)

Ishii, Makoto; Iadecola, Costantino

2016-05-01

Age-related dementia is increasingly recognized as having a mixed pathology, with contributions from both cerebrovascular factors and pathogenic factors associated with Alzheimer's disease (AD). Furthermore, there is accumulating evidence that vascular risk factors in midlife, e.g., obesity, diabetes, and hypertension, increase the risk of developing late-life dementia. Since obesity and changes in body weight/adiposity often drive diabetes and hypertension, understanding the relationship between adiposity and age-related dementia may reveal common underlying mechanisms. Here we offer a brief appraisal of how changes in body weight and adiposity are related to both AD and dementia on vascular basis, and examine the involvement of two key adipocyte-derived hormones: leptin and adiponectin. The evidence suggests that in midlife increased body weight/adiposity and subsequent changes in adipocyte-derived hormones may increase the long-term susceptibility to dementia. On the other hand, later in life, decreases in body weight/adiposity and related hormonal changes are early manifestations of disease that precede the onset of dementia and may promote AD and vascular pathology. Understanding the contribution of adiposity to age-related dementia may help identify the underlying pathological mechanisms common to both vascular dementia and AD, and provide new putative targets for early diagnosis and therapy. This article is part of a Special Issue entitled: Vascular Contributions to Cognitive Impairment and Dementia, edited by M. Paul Murphy, Roderick A. Corriveau and Donna M. Wilcock. Copyright © 2015 Elsevier B.V. All rights reserved.

Safety and tolerability of cell culture-derived and egg-derived trivalent influenza vaccines in 3 to children and adolescents at risk of influenza-related complications.

Science.gov (United States)

Diez-Domingo, Javier; de Martino, Maurizio; Lopez, Jose Garcia-Sicilia; Zuccotti, Gian Vincenzo; Icardi, Giancarlo; Villani, Alberto; Moreno-Perez, David; Hernández, María Méndez; Aldeán, Javier Álvarez; Mateen, Ahmed Abdul; Enweonye, Igwebuike; de Rooij, Richard; Chandra, Richa

2016-08-01

This descriptive, non-comparative, phase III study evaluated the safety and tolerability of cell culture-derived (TIVc) and egg-derived (TIV) seasonal influenza vaccines in children at risk of influenza-related complications. Four hundred and thirty subjects were randomized 2:1 to TIVc or TIV. Subjects aged 3 to vaccinated, n=89) or two doses (if not previously vaccinated, n=124) of the study vaccines; the 9 to vaccination; safety was monitored for 6 months. After any vaccination, the most frequently reported solicited local adverse event (AE) was tenderness/pain (TIVc 44%, 66%, 53% and TIV 56%, 51%, 65% in the age groups 3 to vaccine-related serious AEs were noted. New onset of chronic disease was reported in ≤1% of subjects. TIVc and TIV had acceptable tolerability and similar safety profiles in at-risk children (NCT01998477). Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Testing and Improving the Luminosity Relations for Gamma-Ray Bursts

Science.gov (United States)

Collazzi, Andrew C.

2012-01-01

Gamma Ray Bursts (GRBs) have several luminosity relations where a measurable property of a burst light curve or spectrum is correlated with the burst luminosity. These luminosity relations are calibrated for the fraction of bursts with spectroscopic redshifts and hence the known luminosities. GRBs have thus become known as a type of "standard candle” where standard candle is meant in the usual sense that luminosities can be derived from measurable properties of the bursts. GRBs can therefore be used for the same cosmology applications as Type Ia supernovae, including the construction of the Hubble Diagram and measuring massive star formation rate. The greatest disadvantage of using GRBs as standard candles is that their accuracy is lower than desired. With the recent advent of GRBs as a new standard candle, every effort must be made to test and improve the distance measures. Here, methods are employed to do just that. First, generalized forms of two tests are performed on the luminosity relations. All the luminosity relations pass one of these tests, and all but two pass the other. Even with this failure, redundancies in using multiple luminosity relations allows all the luminosity relations to retain value. Next, the "Firmani relation” is shown to have poorer accuracy than first advertised. It is also shown to be derivable from two other luminosity relations. For these reasons, the Firmani relation is useless for cosmology. The Amati relation is then revisited and shown to be an artifact of a combination of selection effects. Therefore, the Amati relation is also not good for cosmology. Fourthly, the systematic errors involved in measuring a luminosity indicator (Epeak) are measured. The result is an irreducible systematic error of 28%. Finally, the work concludes with a discussion about the impact of the work and the future of GRB luminosity relations.

Special relativity a heuristic approach

CERN Document Server

Hassani, Sadri

2017-01-01

Special Relativity: A Heuristic Approach provides a qualitative exposition of relativity theory on the basis of the constancy of the speed of light. Using Einstein's signal velocity as the defining idea for the notion of simultaneity and the fact that the speed of light is independent of the motion of its source, chapters delve into a qualitative exposition of the relativity of time and length, discuss the time dilation formula using the standard light clock, explore the Minkowski four-dimensional space-time distance based on how the time dilation formula is derived, and define the components of the two-dimensional space-time velocity, amongst other topics. Provides a heuristic derivation of the Minkowski distance formula Uses relativistic photography to see Lorentz transformation and vector algebra manipulation in action Includes worked examples to elucidate and complement the topic being discussed Written in a very accessible style

Didactic derivation of the special theory of relativity from the Klein–Gordon equation

International Nuclear Information System (INIS)

Arodź, H

2014-01-01

We present a didactic derivation of the special theory of relativity in which Lorentz transformations are ‘discovered’ as symmetry transformations of the Klein–Gordon equation. The interpretation of Lorentz boosts as transformations to moving inertial reference frames is not assumed at the start, but it naturally appears at a later stage. The relative velocity v of two inertial reference frames is defined in terms of the elements of the pertinent Lorentz matrix, and the bound |v|< c is presented as a simple theorem that follows from the structure of the Lorentz group. The polar decomposition of Lorentz matrices is used to explain noncommutativity and nonassociativity of the relativistic composition (‘addition’) of velocities. (paper)

[Analysis of factors related to the number of mesenchymal stem cells derived from synovial fluid of the temporomandibular joint].

Science.gov (United States)

Sun, Y P; Zheng, Y H; Zhang, Z G

2017-06-09

Objective: To analyze related factors on the number of mesenchymal stem cells in the synovial fluid of the temporomandibular joint (TMJ) and provide an research basis for understanding of the source and biological role of mesenchymal stem cells derived from synovial fluid in TMJ. Methods: One hundred and twenty-two synovial fluid samples from 91 temporomandibular disorders (TMD) patients who visited in Department of TMJ Center, Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-sen University from March 2013 to December 2013 were collected in this study, and 6 TMJ synovial fluid samples from 6 normal volunteers who were studying in the North Campus of Sun Yat-sen University were also collected, so did their clinical information. Then the relation between the number of mesenchymal stem cells derived from synovial fluid and the health status of the joints, age of donor, disc perforation, condylar bony destruction, blood containing and visual analogue scale score of pain were investigated using Mann-Whitney U test and Spearman rank correlation test. Results: The number of mesenchymal stem cells derived from synovial fluid had no significant relation with visual analogue scale score of pain ( r= 0.041, P= 0.672), blood containing ( P= 0.063), condylar bony destruction ( P= 0.371). Linear correlation between the number of mesenchymal stem cells derived from synovial fluid and age of donor was very week ( r= 0.186, P= 0.043). The number of mesenchymal stem cells up-regulated when the joint was in a disease state ( P= 0.001). The disc perforation group had more mesenchymal stem cells in synovial fluid than without disc perforation group ( P= 0.042). Conclusions: The number of mesenchymal stem cells derived from synovial fluid in TMJ has no correlation with peripheral blood circulation and condylar bony destruction, while has close relation with soft tissue structure damage of the joint.

Analysis of social relations among organizational units derived from process models and redesign of organization structure

NARCIS (Netherlands)

Choi, I.; Song, M.S.; Kim, K.M.; Lee, Y-H.

2007-01-01

Despite surging interests in analyzing business processes, there are few scientific approaches to analysis and redesign of organizational structures which can greatly affect the performance of business processes. This paper presents a method for deriving and analyzing organizational relations from

Comparison of x ray computed tomography number to proton relative linear stopping power conversion functions using a standard phantom.

Science.gov (United States)

Moyers, M F

2014-06-01

Adequate evaluation of the results from multi-institutional trials involving light ion beam treatments requires consideration of the planning margins applied to both targets and organs at risk. A major uncertainty that affects the size of these margins is the conversion of x ray computed tomography numbers (XCTNs) to relative linear stopping powers (RLSPs). Various facilities engaged in multi-institutional clinical trials involving proton beams have been applying significantly different margins in their patient planning. This study was performed to determine the variance in the conversion functions used at proton facilities in the U.S.A. wishing to participate in National Cancer Institute sponsored clinical trials. A simplified method of determining the conversion function was developed using a standard phantom containing only water and aluminum. The new method was based on the premise that all scanners have their XCTNs for air and water calibrated daily to constant values but that the XCTNs for high density/high atomic number materials are variable with different scanning conditions. The standard phantom was taken to 10 different proton facilities and scanned with the local protocols resulting in 14 derived conversion functions which were compared to the conversion functions used at the local facilities. For tissues within ±300 XCTN of water, all facility functions produced converted RLSP values within ±6% of the values produced by the standard function and within 8% of the values from any other facility's function. For XCTNs corresponding to lung tissue, converted RLSP values differed by as great as ±8% from the standard and up to 16% from the values of other facilities. For XCTNs corresponding to low-density immobilization foam, the maximum to minimum values differed by as much as 40%. The new method greatly simplifies determination of the conversion function, reduces ambiguity, and in the future could promote standardization between facilities. Although it

Results on Standard Model Higgs Boson searches at high mass at the LHC

International Nuclear Information System (INIS)

Gao, Yanyan

2014-01-01

We present results from searches for the standard model Higgs boson with a mass greater than 200 GeV in pp collisions at √(s)=7 TeV. The data are collected at the LHC with both ATLAS and CMS detectors, and correspond to integrated luminosity of 5 fb -1 each. Searches are performed in the 2 main decay modes WW and ZZ. No significant excess of events above the standard model background expectations is observed, and upper limits on the Higgs boson production relative to the standard model expectation are derived. A standard model Higgs boson is excluded in the mass range up to 539 GeV or 600 GeV at 95% confidence level by the ATLAS or CMS experiments respectively. (author)

Derivation of a thermodynamic closure relation in the isothermal-isobaric ensemble using quasi-Gaussian entropy theory

NARCIS (Netherlands)

Apol, M.E F; Amadei, A; Berendsen, H.J.C.

1996-01-01

In an analogous way as was done previously in the canonical ensemble, we derived for dilute gases an approximated thermodynamic closure relation in the isothermal-isobaric ensemble using quasi-Gaussian entropy theory. For the Gamma state, we formulated equations for the temperature dependence of

Examining database persistence of ISO/EN 13606 standardized electronic health record extracts: relational vs. NoSQL approaches.

Science.gov (United States)

Sánchez-de-Madariaga, Ricardo; Muñoz, Adolfo; Lozano-Rubí, Raimundo; Serrano-Balazote, Pablo; Castro, Antonio L; Moreno, Oscar; Pascual, Mario

2017-08-18

The objective of this research is to compare the relational and non-relational (NoSQL) database systems approaches in order to store, recover, query and persist standardized medical information in the form of ISO/EN 13606 normalized Electronic Health Record XML extracts, both in isolation and concurrently. NoSQL database systems have recently attracted much attention, but few studies in the literature address their direct comparison with relational databases when applied to build the persistence layer of a standardized medical information system. One relational and two NoSQL databases (one document-based and one native XML database) of three different sizes have been created in order to evaluate and compare the response times (algorithmic complexity) of six different complexity growing queries, which have been performed on them. Similar appropriate results available in the literature have also been considered. Relational and non-relational NoSQL database systems show almost linear algorithmic complexity query execution. However, they show very different linear slopes, the former being much steeper than the two latter. Document-based NoSQL databases perform better in concurrency than in isolation, and also better than relational databases in concurrency. Non-relational NoSQL databases seem to be more appropriate than standard relational SQL databases when database size is extremely high (secondary use, research applications). Document-based NoSQL databases perform in general better than native XML NoSQL databases. EHR extracts visualization and edition are also document-based tasks more appropriate to NoSQL database systems. However, the appropriate database solution much depends on each particular situation and specific problem.

Effects of Center Offset and Noise on Weak-Lensing Derived Concentration-Mass Relation of Dark Matter Halos

Science.gov (United States)

Du, Wei; Fan, Zuhui

2014-04-01

With the halo catalog from the Millennium Simulation, we analyze the weak-lensing measured density profiles for clusters of galaxies, paying attention to the determination of the concentration-mass (c-M) relation, which can be biased by the center offset, selection effect, and shape noise from intrinsic ellipticities of background galaxies. Several different methods of locating the center of a cluster from weak-lensing effects alone are explored. We find that, for intermediate redshift clusters, the highest peak from our newly proposed two-scale smoothing method applied to the reconstructed convergence field, first with a smoothing scale of 2' and then 0.'5, corresponds best to the true center. Assuming the parameterized Navarro-Frenk-White profile, we fit the reduced tangential shear signals around different centers identified by different methods. It is shown that, for the ensemble median values, a center offset larger than one scale radius rs can bias the derived mass and concentration significantly lower than the true values, especially for low-mass halos. However, the existence of noise can compensate for the offset effect and reduce the systematic bias, although the scatter of mass and concentration becomes considerably larger. Statistically, the bias effect of center offset on the c-M relation is insignificant if an appropriate center finding method is adopted. On the other hand, noise from intrinsic ellipticities can bias the c-M relation derived from a sample of weak-lensing analyzed clusters if a simple χ2 fitting method is used. To properly account for the scatter and covariance between c and M, we apply a Bayesian method to improve the statistical analysis of the c-M relation. It is shown that this new method allows us to derive the c-M relation with significantly reduced biases.

Effects of center offset and noise on weak-lensing derived concentration-mass relation of dark matter halos

International Nuclear Information System (INIS)

Du, Wei; Fan, Zuhui

2014-01-01

With the halo catalog from the Millennium Simulation, we analyze the weak-lensing measured density profiles for clusters of galaxies, paying attention to the determination of the concentration-mass (c-M) relation, which can be biased by the center offset, selection effect, and shape noise from intrinsic ellipticities of background galaxies. Several different methods of locating the center of a cluster from weak-lensing effects alone are explored. We find that, for intermediate redshift clusters, the highest peak from our newly proposed two-scale smoothing method applied to the reconstructed convergence field, first with a smoothing scale of 2' and then 0.'5, corresponds best to the true center. Assuming the parameterized Navarro-Frenk-White profile, we fit the reduced tangential shear signals around different centers identified by different methods. It is shown that, for the ensemble median values, a center offset larger than one scale radius r s can bias the derived mass and concentration significantly lower than the true values, especially for low-mass halos. However, the existence of noise can compensate for the offset effect and reduce the systematic bias, although the scatter of mass and concentration becomes considerably larger. Statistically, the bias effect of center offset on the c-M relation is insignificant if an appropriate center finding method is adopted. On the other hand, noise from intrinsic ellipticities can bias the c-M relation derived from a sample of weak-lensing analyzed clusters if a simple χ 2 fitting method is used. To properly account for the scatter and covariance between c and M, we apply a Bayesian method to improve the statistical analysis of the c-M relation. It is shown that this new method allows us to derive the c-M relation with significantly reduced biases.

From Classical to Discrete Gravity through Exponential Non-Standard Lagrangians in General Relativity

Directory of Open Access Journals (Sweden)

Rami Ahmad El-Nabulsi

2015-08-01

Full Text Available Recently, non-standard Lagrangians have gained a growing importance in theoretical physics and in the theory of non-linear differential equations. However, their formulations and implications in general relativity are still in their infancies despite some advances in contemporary cosmology. The main aim of this paper is to fill the gap. Though non-standard Lagrangians may be defined by a multitude form, in this paper, we considered the exponential type. One basic feature of exponential non-standard Lagrangians concerns the modified Euler-Lagrange equation obtained from the standard variational analysis. Accordingly, when applied to spacetime geometries, one unsurprisingly expects modified geodesic equations. However, when taking into account the time-like paths parameterization constraint, remarkably, it was observed that mutually discrete gravity and discrete spacetime emerge in the theory. Two different independent cases were obtained: A geometrical manifold with new spacetime coordinates augmented by a metric signature change and a geometrical manifold characterized by a discretized spacetime metric. Both cases give raise to Einstein’s field equations yet the gravity is discretized and originated from “spacetime discreteness”. A number of mathematical and physical implications of these results were discussed though this paper and perspectives are given accordingly.

Effect of enamel matrix derivative and parathyroid hormone on bone formation in standardized osseous defects: an experimental study in minipigs

DEFF Research Database (Denmark)

Jensen, Simon S; Chen, B; Bornstein, Michael M

2011-01-01

Previous experimental studies have indicated that locally administered enamel matrix derivative (EMD) and parathyroid hormone (PTH) may have a stimulatory effect on bone formation. However, it is not clear if the positive effect of EMD is related to its effect on the periodontium as a whole...

A general approach to quantification of hydroxycinnamic acid derivatives and flavones, flavonols, and their glycosides by UV spectrophotometry

Science.gov (United States)

A general method was developed for the quantification of hydroxycinnamic acid derivatives and flavones, flavonols, and their glycosides based on the UV molar relative response factors (MRRF) of the standards. Each of these phenolic compounds contains a cinnamoyl structure and has a maximum absorban...

Geometric Least Square Models for Deriving [0,1]-Valued Interval Weights from Interval Fuzzy Preference Relations Based on Multiplicative Transitivity

Directory of Open Access Journals (Sweden)

Xuan Yang

2015-01-01

Full Text Available This paper presents a geometric least square framework for deriving [0,1]-valued interval weights from interval fuzzy preference relations. By analyzing the relationship among [0,1]-valued interval weights, multiplicatively consistent interval judgments, and planes, a geometric least square model is developed to derive a normalized [0,1]-valued interval weight vector from an interval fuzzy preference relation. Based on the difference ratio between two interval fuzzy preference relations, a geometric average difference ratio between one interval fuzzy preference relation and the others is defined and employed to determine the relative importance weights for individual interval fuzzy preference relations. A geometric least square based approach is further put forward for solving group decision making problems. An individual decision numerical example and a group decision making problem with the selection of enterprise resource planning software products are furnished to illustrate the effectiveness and applicability of the proposed models.

Work related perceived stress and muscle activity during standardized computer work among female computer users

DEFF Research Database (Denmark)

Larsman, P; Thorn, S; Søgaard, K

2009-01-01

The current study investigated the associations between work-related perceived stress and surface electromyographic (sEMG) parameters (muscle activity and muscle rest) during standardized simulated computer work (typing, editing, precision, and Stroop tasks). It was part of the European case......-control study, NEW (Neuromuscular assessment in the Elderly Worker). The present cross-sectional study was based on a questionnaire survey and sEMG measurements among Danish and Swedish female computer users aged 45 or older (n=49). The results show associations between work-related perceived stress...... and trapezius muscle activity and rest during standardized simulated computer work, and provide partial empirical support for the hypothesized pathway of stress induced muscle activity in the association between an adverse psychosocial work environment and musculoskeletal symptoms in the neck and shoulder....

Universal Dimensions of Meaning Derived from Semantic Relations among Words and Senses: Mereological Completeness vs. Ontological Generality

Directory of Open Access Journals (Sweden)

Alexei V. Samsonovich

2014-07-01

Full Text Available A key to semantic analysis is a precise and practically useful definition of meaning that is general for all domains of knowledge. We previously introduced the notion of weak semantic map: a metric space allocating concepts along their most general (universal semantic characteristics while at the same time ignoring other, domain-specific aspects of their meanings. Here we address questions of the number, quality, and mutual independence of the weak semantic dimensions. Specifically, we employ semantic relationships not previously used for weak semantic mapping, such as holonymy/meronymy (“is-part/member-of”, and we compare maps constructed from word senses to those constructed from words. We show that the “completeness” dimension derived from the holonym/meronym relation is independent of, and practically orthogonal to, the “abstractness” dimension derived from the hypernym-hyponym (“is-a” relation, while both dimensions are orthogonal to the maps derived from synonymy and antonymy. Interestingly, the choice of using relations among words vs. senses implies a non-trivial trade-off between rich and unambiguous information due to homonymy and polysemy. The practical utility of the new and prior dimensions is illustrated by the automated evaluation of different kinds of documents. Residual analysis of available linguistic resources, such as WordNet, suggests that the number of universal semantic dimensions representable in natural language may be finite. Their complete characterization, as well as the extension of results to non-linguistic materials, remains an open challenge.

Derived Manding in Children with Autism: Synthesizing Skinner's Verbal Behavior with Relational Frame Theory

Science.gov (United States)

Murphy, Carol; Barnes-Holmes, Dermot; Barnes-Holmes, Yvonne

2005-01-01

Mand functions for two stimuli (A1 and A2) were trained for 3 children with autism and were then incorporated into two related conditional discriminations (A1-B1/A2 -B2 and B1-C1/B2-C2). Tests were conducted to probe for a derived transfer of mand response functions from Al and A2 to C1 and C2, respectively. When 1 participant failed to…

Fentanyl-related compounds and derivatives: current status and future prospects for pharmaceutical applications

Science.gov (United States)

Vardanyan, Ruben S; Hruby, Victor J

2014-01-01

Fentanyl and its analogs have been mainstays for the treatment of severe to moderate pain for many years. In this review, we outline the structural and corresponding synthetic strategies that have been used to understand the structure–biological activity relationship in fentanyl-related compounds and derivatives and their biological activity profiles. We discuss how changes in the scaffold structure can change biological and pharmacological activities. Finally, recent efforts to design and synthesize novel multivalent ligands that act as mu and delta opioid receptors and NK-1 receptors are discussed. PMID:24635521

22 CFR 9.6 - Derivative classification.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Derivative classification. 9.6 Section 9.6 Foreign Relations DEPARTMENT OF STATE GENERAL SECURITY INFORMATION REGULATIONS § 9.6 Derivative classification. (a) Definition. Derivative classification is the incorporating, paraphrasing, restating or...

Preparation of 7-substituted ginkgolide derivatives

DEFF Research Database (Denmark)

Vogensen, Stine Byskov; Strømgaard, Kristian; Shindou, Hideo

2003-01-01

alpha-fluoro ginkgolide B was equipotent to ginkgolide B underlining the critical importance of the 7-position of ginkgolides for PAF receptor activity. Herein we describe the synthesis of a series of ginkgolide B derivatives with modifications at the 7-position and the pharmacological evaluation...... of these derivatives as assayed by cloned PAF receptors. In two cases nucleophilic attack on a 7beta-O-triflate ginkgolide B did not lead to the expected products, but gave rise to two unprecedented ginkgolide derivatives, one with a novel rearranged skeleton. Furthermore, standard reduction of 7alpha-azido ginkgolide......-chloro ginkgolide B, the most potent nonaromatic ginkgolide derivative described to date with a K(i) value of 110 nM....

QSAR Studies on Andrographolide Derivatives as α-Glucosidase Inhibitors

Directory of Open Access Journals (Sweden)

Shaohui Cai

2010-03-01

Full Text Available Andrographolide derivatives were shown to inhibit α-glucosidase. To investigate the relationship between activities and structures of andrographolide derivatives, a training set was chosen from 25 andrographolide derivatives by the principal component analysis (PCA method, and a quantitative structure-activity relationship (QSAR was established by 2D and 3D QSAR methods. The cross-validation r2 (0.731 and standard error (0.225 illustrated that the 2D-QSAR model was able to identify the important molecular fragments and the cross-validation r2 (0.794 and standard error (0.127 demonstrated that the 3D-QSAR model was capable of exploring the spatial distribution of important fragments. The obtained results suggested that proposed combination of 2D and 3D QSAR models could be useful in predicting the α-glucosidase inhibiting activity of andrographolide derivatives.

Work-related falls among union carpenters in Washington State before and after the Vertical Fall Arrest Standard.

Science.gov (United States)

Lipscomb, Hester J; Li, Leiming; Dement, John

2003-08-01

Washington State enacted a change in their fall standard for the construction industry in 1991, preceding the Safety Standard for Fall Protection in the Construction Industry promulgated by Federal OSHA in 1994. We evaluated changes in the rate of falls from elevations and measures of severity among a large cohort of union carpenters after the fall standard change in Washington State, taking into account the temporal trends in their overall injury rates. There was a significant decrease in the rate of falls from height after the standard went into effect, even after adjusting for the overall decrease in work-related injuries among this cohort. Much of the decrease was immediate, likely representing the publicity surrounding fatal falls and subsequent promulgation of the standard. The greatest decrease was seen between 3 and 3(1/2) years after the standard went into effect. There was a significant reduction in mean paid lost days per event after the standard change and there was a significant reduction in mean cost per fall when adjusting for age and the temporal trend for costs among non-fall injuries. Through the use of observational methods we have demonstrated significant effects of the Washington State Vertical Fall Arrest Standard among carpenters in the absence of a control or comparison group. Without controlling for the temporal trend in overall injury rates, the rate of decline in falls appeared significantly greater, but the more pronounced, but delayed, decline was not seen. The analyses demonstrate potential error in failing to account for temporal patterns or assuming that a decline after an intervention is related to the intervention. Copyright 2003 Wiley-Liss, Inc.

Derivation of an occupational exposure limit (OEL) for methylene chloride based on acute CNS effects and relative potency analysis.

Science.gov (United States)

Storm, J E; Rozman, K K

1998-06-01

The Occupational Safety and Health Administration (OSHA) methylene chloride Permissible Exposure Level (PEL) or 25 ppm is quantitatively derived from mouse tumor results observed in a high-exposure National Toxicology Program bioassay. Because this approach depends on controversial interspecies and low-dose extrapolations, the PEL itself has stimulated heated debate. Here, an alternative safety assessment for methylene chloride is presented. It is based on an acute human lowest-observed-adverse-effect level (LOAEL) of 200 ppm for subtle central nervous system (CNS) depression. Steep, parallel exposure-response curves for anesthetic and subanesthetic CNS effects associated with compounds mechanistically and structurally related to methylene chloride are shown to support a safety factor of two to account for inter-individual variability in response. LOAEL/no-observed-adverse-effect ratios for subtle CNS effects associated with structurally related solvents are shown to support a safety factor range of two to four to account for uncertainty in identifying a subthreshold exposure level. Anesthetic relative potencies and anesthetic/subanesthetic effect level ratios are shown to be constant for the compounds evaluated, demonstrating that subanesthetic relative potencies are also constant. Relative potencies among similarly derived occupational exposure limits (OELs) for solvents structurally related to methylene chloride are therefore used to validate the derived methylene chloride OEL range of 25-50 ppm. Because this safety assessment is based on human (rather than rodent) data and empirical (rather than theoretical) exposure-response relationships and is supported by relative potency analysis, it is a defensible alternative to to the OSHA risk assessment and should positively contribute to the debate regarding the appropriate basis and value for a methylene chloride PEL.

On the Linear Relation between the Mean and the Standard Deviation of a Response Time Distribution

Science.gov (United States)

Wagenmakers, Eric-Jan; Brown, Scott

2007-01-01

Although it is generally accepted that the spread of a response time (RT) distribution increases with the mean, the precise nature of this relation remains relatively unexplored. The authors show that in several descriptive RT distributions, the standard deviation increases linearly with the mean. Results from a wide range of tasks from different…

Hypolipidaemic and antiplatelet activity of phenoxyacetic acid derivatives related to alpha-asarone.

Science.gov (United States)

Pérez-Pastén, Ricardo; García, Rosa Virginia; Garduño, Leticia; Reyes, Elba; Labarrios, Fernando; Tamariz, Joaquín; Chamorro, Germán

2006-10-01

The phenoxyacetic acid derivatives 1-6 [2-methoxy-4-(2-propenyl)phenoxyacetic acid (1); 2-methoxy-5-nitro-4-(2-propenyl)phenoxyacetic acid (2); methyl 2-methoxy-4-(2-propenyl)phenoxyacetate (3); ethyl 2-methoxy-4-(2-propenyl)phenoxyacetate (4); methyl 2-methoxy-5-nitro-4-(2-propenyl)phenoxyacetate (5); ethyl 2-methoxy-5-nitro-4-(2-propenyl)phenoxyacetate (6)] related to alpha-asarone have been reported previously as hypolipidaemic agents in diet-induced hyperlipidaemic mice. We have aimed to expand the pharmacological profile of these derivatives by investigating their hypolipidaemic activity in rats and mice under different experimental conditions. The antiplatelet activity was tested also in-vitro from blood derived from consenting healthy volunteers. In normolipidaemic rats, compounds 2, 3 and 5 at oral doses of 40 and 80 mg kg(-1) significantly decreased total cholesterol and LDL-cholesterol levels. Moreover, analogues 3 and 5 administered to hypercholesterolaemic rats at the same doses for seven days also produced a reduction in the content of these same lipoproteins. In neither case were the high-density lipoprotein cholesterol and triglyceride concentrations affected. However, practically all tested compounds were found to be hypocholesterolaemic agents, and were shown to effectively lower low-density lipoprotein cholesterol and triglyceride levels in Triton-induced hyperlipidaemic mice at oral doses of 50 and 100 mg kg(-1). In all tests, all animals appeared to be healthy throughout the experimental period in their therapeutic ranges. Triton-induced hypercholesterolaemic mice appeared to be a desirable model for this class of hypolipidaemic drugs. On the other hand, compounds 1, 2, 4 and 5 significantly inhibited ADP-induced aggregation in-vitro. These findings indicated that all of these compounds appeared to be promising for the treatment of human hyperlipidaemia and thrombotic diseases.

Europium determination in oxide and oxysulfide luminophors and their wastes by the method of direct and derivative spectrophotometry

International Nuclear Information System (INIS)

Mishchenko, V.T.; Aleksandrova, N.N.

1989-01-01

Spectrophotometric methods for europium determination in luminophors are proposed. Application of standard and derivative spectrophotometry allows one to determine europium in oxide and oxysulfide luminophors, their wastes and raffinates produced during waste reprocessing quite accurately and reliably. When determining Eu 2 O 3 (Eu 2 O 2 S) mass shares within 4-8 % limits absolute deviation from the mean result makes up to more than ± 0.2 %, relative standard deviation does not exceed 0.02

Role of Stress-Related Brain-Derived Neurotrophic Factor (BDNF) in the Rat Submandibular Gland

International Nuclear Information System (INIS)

Tsukinoki, Keiichi; Saruta, Juri

2012-01-01

The nerve growth factor (NGF) family comprises NGF, brain-derived neurotrophic factor (BDNF) and neurotrophins (NTs)-3, -4/5, -6 and -7, all of which are collectively referred to as neurotrophins. However, the expression of neurotrophins other than NGF in the salivary gland has not been described in detail. Through interaction with the TrkB receptor, BDNF plays an important role in long-term potentiation. We found that BDNF expression increased within submandibular gland tissue in response to stress, suggesting that the salivary glands are sensitive to stress. In addition, stress caused increases in plasma BDNF derived from the submandibular gland and in TrkB receptor mRNA in the adrenal medulla. Plasma BDNF might activate TrkB receptors in the adrenal medulla during acute stress. The salivary glands are likely to influence not only oral health, but also systemic organs. This review addressed the relationship between hormone-like effects and stress-related BDNF expression in the rat submandibular gland

Generalized Fractional Derivative Anisotropic Viscoelastic Characterization

Directory of Open Access Journals (Sweden)

Harry H. Hilton

2012-01-01

Full Text Available Isotropic linear and nonlinear fractional derivative constitutive relations are formulated and examined in terms of many parameter generalized Kelvin models and are analytically extended to cover general anisotropic homogeneous or non-homogeneous as well as functionally graded viscoelastic material behavior. Equivalent integral constitutive relations, which are computationally more powerful, are derived from fractional differential ones and the associated anisotropic temperature-moisture-degree-of-cure shift functions and reduced times are established. Approximate Fourier transform inversions for fractional derivative relations are formulated and their accuracy is evaluated. The efficacy of integer and fractional derivative constitutive relations is compared and the preferential use of either characterization in analyzing isotropic and anisotropic real materials must be examined on a case-by-case basis. Approximate protocols for curve fitting analytical fractional derivative results to experimental data are formulated and evaluated.

On passive scalar derivative statistics in grid turbulence

International Nuclear Information System (INIS)

Tong, C.; Warhaft, Z.

1994-01-01

The probability density function, and related statistics, of scalar (temperature) derivative fluctuations in decaying grid turbulence with an imposed cross-stream, passive linear temperature profile, is studied for a turbulence Reynolds number range, Re l , varying from 50 to 1200, (corresponding to a Taylor Reynolds number range 30 λ θy has a value of 1.8±0.2 (twice the value observed in shear flows), and has no significant variation with Reynolds number. The ratio of the temperature derivative standard deviation along the gradient to that normal to it is approximately 1.2±0.1 also, with no variation with Re. The kurtosis of the derivatives increases approximately as Re 0.2 l . The results show that the rare, intense temperature deviations that produce the skewed scalar derivative, increase in frequency, but their area fraction (of the total field) becomes smaller as the Reynolds number increases. Thus, since S θy remains constant, they become sharper and more intense, occurring deeper in the tails of the probability density function. Measurements in a thermal mixing layer, which has a nonlinear mean temperature profile, are also presented, and these show a similar value of S θy to the linear profile case. The experiments broadly confirm the two-dimensional numerical simulations of Holzer and Siggia [Phys. Fluids (in press)], as well as other recent simulations, although there are some differences

Dietary standards for school catering in France: serving moderate quantities to improve dietary quality without increasing the food-related cost of meals.

Science.gov (United States)

Vieux, Florent; Dubois, Christophe; Allegre, Laëtitia; Mandon, Lionel; Ciantar, Laurent; Darmon, Nicole

2013-01-01

To assess the impact on food-related cost of meals to fulfill the new compulsory dietary standards for primary schools in France. A descriptive study assessed the relationship between the level of compliance with the standards of observed school meals and their food-related cost. An analytical study assessed the cost of series of meals published in professional journals, and complying or not with new dietary standards. The costs were based on prices actually paid for food used to prepare school meals. Food-related cost of meals. Parametric and nonparametric tests from a total of 42 and 120 series of 20 meals in the analytical and descriptive studies, respectively. The descriptive study indicated that meeting the standards was not related to cost. The analytical study showed that fulfilling the frequency guidelines increased the cost, whereas fulfilling the portion sizes criteria decreased it. Series of meals fully respecting the standards (ie, frequency and portion sizes) cost significantly less (-0.10 €/meal) than series not fulfilling them, because the standards recommend smaller portion sizes. Introducing portion sizes rules in dietary standards for school catering may help increase dietary quality without increasing the food cost of meals. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Employees Training Evaluation related to the Competency Standards in the Steel and Metalworking Industry in Boyacá, Colombia

Directory of Open Access Journals (Sweden)

Carlos Guillermo Carreno-Bodensiek

2016-12-01

Full Text Available This work presents the results of a research process applied to a sample of companies in the steel and metalworking sector in Boyacá, Colombia. The active workers are evaluated over the Occupational Competency Standards related to their daily activities. It also aims to highlight the formation priority of human talent for business, according to build up a level of competitiveness. Also, seeks to meet the need to train and develop skills and competencies in the workforce, taking into account the concepts of experts about training and developing proposals for management. This research is consistent with global trends in education and the requirements of standardization of training, why diagnoses and designs are focused on the functions of the companies related to the Standards of Competency.

The Standard Deviation of Launch Vehicle Environments

Science.gov (United States)

Yunis, Isam

2005-01-01

Statistical analysis is used in the development of the launch vehicle environments of acoustics, vibrations, and shock. The standard deviation of these environments is critical to accurate statistical extrema. However, often very little data exists to define the standard deviation and it is better to use a typical standard deviation than one derived from a few measurements. This paper uses Space Shuttle and expendable launch vehicle flight data to define a typical standard deviation for acoustics and vibrations. The results suggest that 3dB is a conservative and reasonable standard deviation for the source environment and the payload environment.

Gauge-Independent Scales Related to the Standard Model Vacuum Instability

CERN Document Server

Espinosa, Jose R.; Konstandin, Thomas; Riotto, Antonio

2017-01-01

The measured (central) values of the Higgs and top quark masses indicate that the Standard Model (SM) effective potential develops an instability at high field values. The scale of this instability, determined as the Higgs field value at which the potential drops below the electroweak minimum, is about $10^{11}$ GeV. However, such a scale is unphysical as it is not gauge-invariant and suffers from a gauge-fixing uncertainty of up to two orders of magnitude. Subjecting our system, the SM, to several probes of the instability (adding higher order operators to the potential; letting the vacuum decay through critical bubbles; heating up the system to very high temperature; inflating it) and asking in each case physical questions, we are able to provide several gauge-invariant scales related with the Higgs potential instability.

Variational problems with fractional derivatives: Euler-Lagrange equations

International Nuclear Information System (INIS)

Atanackovic, T M; Konjik, S; Pilipovic, S

2008-01-01

We generalize the fractional variational problem by allowing the possibility that the lower bound in the fractional derivative does not coincide with the lower bound of the integral that is minimized. Also, for the standard case when these two bounds coincide, we derive a new form of Euler-Lagrange equations. We use approximations for fractional derivatives in the Lagrangian and obtain the Euler-Lagrange equations which approximate the initial Euler-Lagrange equations in a weak sense

Age-related disease association of endogenous γ-H2AX foci in mononuclear cells derived from leukapheresis.

Directory of Open Access Journals (Sweden)

Shepherd H Schurman

Full Text Available The phosphorylated form of histone H2AX (γ-H2AX forms immunohistochemically detectable foci at DNA double strand breaks. In peripheral blood mononuclear cells (PBMCs derived from leukapheresis from patients enrolled in the Baltimore Longitudinal Study of Aging, γ-H2AX foci increased in a linear fashion with regards to age, peaking at ~57 years. The relationship between the frequency of γ-H2AX foci and age-related pathologies was assessed. We found a statistically significant (p = 0.023 50% increase in foci in PBMCs derived from patients with a known history of vitamin D deficiency. In addition, there were trends toward increased γ-H2AX foci in patients with cataracts (34% increase, p<0.10 and in sleep apnea patients (44%, p<0.10. Among patients ≥57 y/o, we found a significant (p = 0.037 36% increase in the number of γ-H2AX foci/cell for patients with hypertension compared to non-hypertensive patients. Our results support a role for increased DNA damage in the morbidity of age-related diseases. γ -H2AX may be a biomarker for human morbidity in age-related diseases.

78 FR 12833 - Patient Protection and Affordable Care Act; Standards Related to Essential Health Benefits...

Science.gov (United States)

2013-02-25

... wellness services and chronic disease management; and pediatric services, including oral \\8\\ and vision... Act uses the terms ``dental'' and ``oral'' interchangeably when referring to the pediatric dental care... Parts 147, 155, and 156 Patient Protection and Affordable Care Act; Standards Related to Essential...

Analysis of chemistry textbook content and national science education standards in terms of air quality-related learning goals

Science.gov (United States)

Naughton, Wendy

In this study's Phase One, representatives of nine municipal agencies involved in air quality education were interviewed and interview transcripts were analyzed for themes related to what citizens need to know or be able to do regarding air quality concerns. Based on these themes, eight air quality Learning Goal Sets were generated and validated via peer and member checks. In Phase Two, six college-level, liberal-arts chemistry textbooks and the National Science Education Standards (NSES) were analyzed for congruence with Phase One learning goals. Major categories of desired citizen understandings highlighted in agency interviews concerned air pollution sources, impact, detection, and transport. Identified cognitive skills focused on information-gathering and -evaluating skills, enabling informed decision-making. A content match was found between textbooks and air quality learning goals, but most textbooks fail to address learning goals that remediate citizen misconceptions and inabilities---particularly those with a "personal experience" focus. A partial match between NSES and air quality learning goals was attributed to differing foci: Researcher-derived learning goals deal specifically with air quality, while NSES focus is on "fundamental science concepts," not "many science topics." Analysis of findings within a situated cognition framework suggests implications for instruction and NSES revision.

Bioactivity of Turmeric-Derived Curcuminoids and Related Metabolites in Breast Cancer

Science.gov (United States)

Wright, Laura E.; Frye, Jen B.; Gorti, Bhavana; Timmermann, Barbara N.; Funk, Janet L.

2013-01-01

While the chemotherapeutic effect of curcumin, one of three major curcuminoids derived from turmeric, has been reported, largely unexplored are the effects of complex turmeric extracts more analogous to traditional medicinal preparations, as well as the relative importance of the three curcuminoids and their metabolites as anti-cancer agents. These studies document the pharmacodynamic effects of chemically-complex turmeric extracts relative to curcuminoids on human breast cancer cell growth and tumor cell secretion of parathyroid hormone-related protein (PTHrP), an important driver of cancer bone metastasis. Finally, relative effects of structurally-related metabolites of curcuminoids were assessed on the same endpoints. We report that 3 curcuminoid-containing turmeric extracts differing with respect to the inclusion of additional naturally occurring chemicals (essential oils and/or polar compounds) were equipotent in inhibiting human breast cancer MDA-MB-231 cell growth (IC50=10–16μg/mL) and secretion of osteolytic PTHrP (IC50=2–3μg/mL) when concentrations were normalized to curcuminoid content. Moreover, these effects were curcuminoid-specific, as botanically-related gingerol containing extracts had no effect. While curcumin and bis-demethoxycurcumin were equipotent to each other and to the naturally occurring curcuminoid mixture (IC50=58 μM), demethoxycurcumin was without effect on cell growth. However, each of the individual curcuminoids inhibited PTHrP secretion (IC50=22–31μM) to the same degree as the curcuminoid mixture (IC50=16 μM). Degradative curcuminoid metabolites (vanillin and ferulic acid) did not inhibit cell growth or PTHrP, while reduced metabolites (tetrahydrocurcuminoids) had inhibitory effects on cell growth and PTHrP secretion but only at concentrations ≥10-fold higher than the curcuminoids. These studies emphasize the structural and biological importance of curcuminoids in the anti-breast cancer effects of turmeric and contradict

IEEE Std 382-1985: IEEE standard for qualification of actuators for power operated valve assemblies with safety-related functions for nuclear power plants

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. This standard may also be used to separately qualify actuator components. This standard establishes the minimum requirements for, and guidance regarding, the methods and procedures for qualification of power-driven valve actuators with safety-related functions Part I describes the qualification process. Part II describes the standard qualification cases and their environmental parameters for the usual locations of safety-related equipment in a nuclear generating station. Part III describes the qualification tests outlined in 6.3.3

Quantum derivatives and the Schroedinger equation

International Nuclear Information System (INIS)

Ben Adda, Faycal; Cresson, Jacky

2004-01-01

We define a scale derivative for non-differentiable functions. It is constructed via quantum derivatives which take into account non-differentiability and the existence of a minimal resolution for mean representation. This justify heuristic computations made by Nottale in scale-relativity. In particular, the Schroedinger equation is derived via the scale-relativity principle and Newton's fundamental equation of dynamics

Concept for an International Standard related to Space Weather Effects on Space Systems

Science.gov (United States)

Tobiska, W. Kent; Tomky, Alyssa

There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances

Feasibility Study of a Standardized Novel Animal Model for Cervical Vertebral Augmentation in Sheep Using a PTH Derivate Bioactive Material

Directory of Open Access Journals (Sweden)

Karina Klein

2014-08-01

Full Text Available Prophylactic local treatment involving percutaneous vertebral augmentation using bioactive materials is a new treatment strategy in spine surgery in humans for vertebral bodies at risk. Standardized animal models for this procedure are almost non-existent. The purpose of this study was to: (i prove the efficacy of PTH derivate bioactive materials for new bone formation; and (ii create a new, highly standardized cervical vertebral augmentation model in sheep. Three different concentrations of a modified form of parathyroid hormone (PTH covalently bound to a fibrin matrix containing strontium carbonate were used. The same matrix without PTH and shams were used as controls. The bioactive materials were locally injected. Using a ventral surgical approach, a pre-set amount of material was injected under fluoroscopic guidance into the intertrabecular space of three vertebral bodies. Intravital fluorescent dyes were used to demonstrate new bone formation. After an observation period of four months, the animals were sacrificed, and vertebral bodies were processed for µCT, histomorphometry, histology and sequential fluorescence evaluation. Enhanced localized bone activity and new bone formation in the injected area could be determined for all experimental groups in comparison to the matrix alone and sham with the highest values detected for the group with a medium concentration of PTH.

Experimental and computational thermochemical studies of 9-R-xanthene derivatives (R=OH, COOH, CONH2)

International Nuclear Information System (INIS)

Freitas, Vera L.S.; Gomes, José R.B.; Ribeiro da Silva, Maria D.M.C.

2012-01-01

Highlights: ► Energetics of 9-R-xanthene derivatives (R=OH, COOH, CONH 2 ). ► Δ f H m o (cr) of three xanthenes derivatives was measured by static bomb calorimetry. ► Δ cr g H m o of xanthenes derivatives was derived Knudsen effusion technique. ► Molecular orbital calculations for xanthene derivatives were done by G3(MP2)//B3LYP. - Abstract: In the present work, the standard (p° = 0.1 MPa) molar enthalpies of formation of xanthydrol, 9-xanthenecarboxylic acid and 9-xanthenecarboxamide, in the gaseous state, at T = 298.15 K, were determined by experimental and computational studies. The experimental techniques used were the static-bomb combustion calorimetry, which enabled the determination of the standard molar enthalpy of formation, in the crystalline state, and the vacuum drop microcalorimetric and the Knudsen effusion techniques used to derive the enthalpy of sublimation. For comparison purposes, we performed standard ab initio molecular orbital calculations, using the G3(MP2)//B3LYP composite procedure, of the enthalpies of several homodesmotic reactions, allowing to extract the standard molar enthalpies of formation, in the gaseous state, of the three xanthene derivatives considered in this work. The calculated results are in good agreement with the experimental data.

A Note on Standard Deviation and Standard Error

Science.gov (United States)

Hassani, Hossein; Ghodsi, Mansoureh; Howell, Gareth

2010-01-01

Many students confuse the standard deviation and standard error of the mean and are unsure which, if either, to use in presenting data. In this article, we endeavour to address these questions and cover some related ambiguities about these quantities.

Astronaut Bone Medical Standards Derived from Finite Element (FE) Models of QCT Scans from Population Studies

Science.gov (United States)

Sibonga, J. D.; Feiveson, A. H.

2014-01-01

This work was accomplished in support of the Finite Element [FE] Strength Task Group, NASA Johnson Space Center [JSC], Houston, TX. This group was charged with the task of developing rules for using finite-element [FE] bone-strength measures to construct operating bands for bone health that are relevant to astronauts following exposure to spaceflight. FE modeling is a computational tool used by engineers to estimate the failure loads of complex structures. Recently, some engineers have used this tool to characterize the failure loads of the hip in population studies that also monitored fracture outcomes. A Directed Research Task was authorized in July, 2012 to investigate FE data from these population studies to derive these proposed standards of bone health as a function of age and gender. The proposed standards make use of an FE-based index that integrates multiple contributors to bone strength, an expanded evaluation that is critical after an astronaut is exposed to spaceflight. The current index of bone health used by NASA is the measurement of areal BMD. There was a concern voiced by a research and clinical advisory panel that the sole use of areal BMD would be insufficient to fully evaluate the effects of spaceflight on the hip. Hence, NASA may not have a full understanding of fracture risk, both during and after a mission, and may be poorly estimating in-flight countermeasure efficacy. The FE Strength Task Group - composed of principal investigators of the aforementioned population studies and of FE modelers -donated some of its population QCT data to estimate of hip bone strength by FE modeling for this specific purpose. Consequently, Human Health Countermeasures [HHC] has compiled a dataset of FE hip strengths, generated by a single FE modeling approach, from human subjects (approx.1060) with ages covering the age range of the astronauts. The dataset has been analyzed to generate a set of FE strength cutoffs for the following scenarios: a) Qualify an

A General Method for QTL Mapping in Multiple Related Populations Derived from Multiple Parents

Directory of Open Access Journals (Sweden)

Yan AO

2009-03-01

Full Text Available It's well known that incorporating some existing populations derived from multiple parents may improve QTL mapping and QTL-based breeding programs. However, no general maximum likelihood method has been available for this strategy. Based on the QTL mapping in multiple related populations derived from two parents, a maximum likelihood estimation method was proposed, which can incorporate several populations derived from three or more parents and also can be used to handle different mating designs. Taking a circle design as an example, we conducted simulation studies to study the effect of QTL heritability and sample size upon the proposed method. The results showed that under the same heritability, enhanced power of QTL detection and more precise and accurate estimation of parameters could be obtained when three F2 populations were jointly analyzed, compared with the joint analysis of any two F2 populations. Higher heritability, especially with larger sample sizes, would increase the ability of QTL detection and improve the estimation of parameters. Potential advantages of the method are as follows: firstly, the existing results of QTL mapping in single population can be compared and integrated with each other with the proposed method, therefore the ability of QTL detection and precision of QTL mapping can be improved. Secondly, owing to multiple alleles in multiple parents, the method can exploit gene resource more adequately, which will lay an important genetic groundwork for plant improvement.

Kallikrein-related peptidase 4 induces cancer-associated fibroblast features in prostate-derived stromal cells.

Science.gov (United States)

Kryza, Thomas; Silva, Lakmali M; Bock, Nathalie; Fuhrman-Luck, Ruth A; Stephens, Carson R; Gao, Jin; Samaratunga, Hema; Lawrence, Mitchell G; Hooper, John D; Dong, Ying; Risbridger, Gail P; Clements, Judith A

2017-10-01

The reciprocal communication between cancer cells and their microenvironment is critical in cancer progression. Although involvement of cancer-associated fibroblasts (CAF) in cancer progression is long established, the molecular mechanisms leading to differentiation of CAFs from normal fibroblasts are poorly understood. Here, we report that kallikrein-related peptidase-4 (KLK4) promotes CAF differentiation. KLK4 is highly expressed in prostate epithelial cells of premalignant (prostatic intraepithelial neoplasia) and malignant lesions compared to normal prostate epithelia, especially at the peristromal interface. KLK4 induced CAF-like features in the prostate-derived WPMY1 normal stromal cell line, including increased expression of alpha-smooth muscle actin, ESR1 and SFRP1. KLK4 activated protease-activated receptor-1 in WPMY1 cells increasing expression of several factors (FGF1, TAGLN, LOX, IL8, VEGFA) involved in prostate cancer progression. In addition, KLK4 induced WPMY1 cell proliferation and secretome changes, which in turn stimulated HUVEC cell proliferation that could be blocked by a VEGFA antibody. Importantly, the genes dysregulated by KLK4 treatment of WPMY1 cells were also differentially expressed between patient-derived CAFs compared to matched nonmalignant fibroblasts and were further increased by KLK4 treatment. Taken together, we propose that epithelial-derived KLK4 promotes tumour progression by actively promoting CAF differentiation in the prostate stromal microenvironment. © 2017 The Authors. Published by FEBS Press and John Wiley & Sons Ltd.

Quantitative angle-insensitive flow measurement using relative standard deviation OCT.

Science.gov (United States)

Zhu, Jiang; Zhang, Buyun; Qi, Li; Wang, Ling; Yang, Qiang; Zhu, Zhuqing; Huo, Tiancheng; Chen, Zhongping

2017-10-30

Incorporating different data processing methods, optical coherence tomography (OCT) has the ability for high-resolution angiography and quantitative flow velocity measurements. However, OCT angiography cannot provide quantitative information of flow velocities, and the velocity measurement based on Doppler OCT requires the determination of Doppler angles, which is a challenge in a complex vascular network. In this study, we report on a relative standard deviation OCT (RSD-OCT) method which provides both vascular network mapping and quantitative information for flow velocities within a wide range of Doppler angles. The RSD values are angle-insensitive within a wide range of angles, and a nearly linear relationship was found between the RSD values and the flow velocities. The RSD-OCT measurement in a rat cortex shows that it can quantify the blood flow velocities as well as map the vascular network in vivo .

Gauge-independent scales related to the Standard Model vacuum instability

International Nuclear Information System (INIS)

Espinosa, J.R.; Garny, M.; Konstandin, T.; Riotto, A.

2016-08-01

The measured (central) values of the Higgs and top quark masses indicate that the Standard Model (SM) effective potential develops an instability at high field values. The scale of this instability, determined as the Higgs field value at which the potential drops below the electroweak minimum, is about 10"1"1 GeV. However, such a scale is unphysical as it is not gauge invariant and suffers from a gauge-fixing uncertainty of up to two orders of magnitude. Subjecting our system, the SM, to several probes of the instability (adding higher order operators to the potential; letting the vacuum decay through critical bubbles; heating up the system to very high temperature; inflating it) and asking in each case physical questions, we are able to provide several gauge-invariant scales related with the Higgs potential instability.

Einstein in matrix form exact derivation of the theory of special and general relativity without tensors

CERN Document Server

Ludyk, Günter

2013-01-01

This book is an introduction to the theories of Special and General Relativity. The target audience are physicists, engineers and applied scientists who are looking for an understandable introduction to the topic - without too much new mathematics. The fundamental equations of Einsteins theory of Special and General Relativity are derived using matrix calculus, without the help of tensors. This feature makes the book special and a valuable tool for scientists and engineers with no experience in the field of tensor calculus. In part I the foundations of Special Relativity are developed, part II describes the structure and principle of General Relativity. Part III explains the Schwarzschild solution of spherical body gravity and examines the "Black Hole" phenomenon. Any necessary mathematical tools are user friendly provided, either directly in the text or in the appendices.

Comparison of alpha-Type-1 polarizing and standard dendritic cell cytokine cocktail for maturation of therapeutic monocyte-derived dendritic cell preparations from cancer patients

DEFF Research Database (Denmark)

Trepiakas, Redas; Pedersen, Anders Elm; Met, Ozcan

2008-01-01

The current "gold standard" for generation of dendritic cell (DC) used in DC-based cancer vaccine studies is maturation of monocyte-derived DCs with tumor necrosis factor-alpha (TNF-alpha)/IL-1beta/IL-6 and prostaglandin E(2) (PGE(2)). Recently, a protocol for producing so-called alpha-Type-1...... polarized dendritic cells (alphaDC1) in serum-free medium was published based on maturation of monocyte-derived DCs with TNF-alpha/IL-1-beta/polyinosinic:polycytidylic acid (poly-I:C)/interferon (IFN)-alpha and IFN-gamma. This DC maturation cocktail was described to fulfill the criteria for optimal DC......-regulation of inhibitory molecules such as PD-L1, ILT2, ILT3 as compared to sDC. Although alphaDC1 matured DCs secreted more IL-12p70 and IL-23 these DCs had lower or similar stimulatory capacity compared to sDCs when used as stimulating cells in mixed lymphocyte reaction (MLR) or for induction of autologous influenza...

DOE technical standards list: Department of Energy standards index

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

Match-derived relative pitch area changes the physical and team tactical performance of elite soccer players in small-sided soccer games.

Science.gov (United States)

Olthof, Sigrid B H; Frencken, Wouter G P; Lemmink, Koen A P M

2018-07-01

Small-sided games (SSGs) are used in training sessions to prepare for full-sized matches. For the same number of players, smaller pitch sizes result in decreased physical performance and shorter interpersonal distances. A relative pitch area derived from the full-sized match results in larger pitch sizes and this may increase the fit between SSGs and full-sized matches. This study aimed to investigate SSGs with a traditional small pitch and a match-derived relative pitch area in youth elite soccer players. Four age categories (under-13, under-15, under-17 and under-19) played 4 vs. 4 plus goalkeepers on a small (40x30m, 120m 2 relative pitch area) and large pitch (68x47m, 320m 2 relative pitch area). The number of games per age category ranged 15-30. Positional data (LPM-system) were collected to determine physical (total distance covered, high intensity distance and number of sprints) and team tactical (inter-team distance, LPW-ratio, surface area, stretch indices, goalkeeper-defender distance) performance measures and tactical variability. On a large pitch, physical performance significantly increased, inter-team and intra-team distances were significantly larger and tactical variability of intra-team distance measures significantly increased. The match-derived relative pitch area is an important training manipulation and leads to changes in physical and tactical performance 4 vs. 4 plus goalkeepers.

Utility and performance relative to consumer product energy efficiency standards. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Coggins, J.L.

1979-12-14

An investigation of the relative utility and performance of nine major household consumer products covered by the Energy Policy and Conservation Act is summarized. The objective was to define the terms utility and performance, to recommend methods for quantifying these two concepts, and to recommend an approach for dealing with utility and performance issues in the energy efficiency standards program. The definitions developed are: performance of a consumer product is the objective measure of how well, with the expected level of consumer input (following the manufacturer's instructions for installation and operation), the product does its intended job; and utility of a consumer product is a subjective measure, based on the consumer's perception, of the capability of the product to satisfy human needs. Quantification is based on test procedures and consumer survey methods which are largely already in use by industry. Utility and performance issues are important in product classification for prescribing energy efficiency standards. The recommended approach to utility and performance issues and classification is: prior to setting standards, evaluate utility and performance issues in the most quantitative way allowed by resources and schedules in order to develop classification guidelines. This approach requires no changes in existing Department of Energy test procedures.

76 FR 22665 - Release of Final Document Related to the Review of the National Ambient Air Quality Standards for...

Science.gov (United States)

2011-04-22

... criteria. The revised air quality criteria reflect advances in scientific knowledge on the effects of the... National Ambient Air Quality Standards, contains staff analyses of the scientific bases for alternative... Document Related to the Review of the National Ambient Air Quality Standards for Particulate Matter AGENCY...

Digital proportional-integral-derivative velocity controller of a Mössbauer spectrometer

International Nuclear Information System (INIS)

Pechousek, J; Prochazka, R; Mashlan, M; Jancik, D; Frydrych, J

2009-01-01

The digital proportional-integral-derivative (PID) velocity controller used in the Mössbauer spectrometer implemented in field programmable gate array (FPGA) is based on the National Instruments CompactRIO embedded system and LabVIEW graphical programming tools. The system works as a remote system accessible via the Ethernet. The digital controller operates in real-time conditions, and the maximum sampling frequency is approximately 227 kS s −1 . The system was tested with standard sample measurements of α-Fe and α- 57 Fe 2 O 3 on two different electromechanical velocity transducers. The nonlinearities of the velocity scales in the relative form are better than 0.2%. The replacement of the standard analog PID controller by the new system brings the possibility of optimizing the control process more precisely. (technical design note)

Selective 3,4-Dihydroxyphenylalanine Analysis in Human Urine as Ethoxycarbonyltert- butyldimethylsilyl Derivatives by Gas Chromatography-Mass Spectrometry

International Nuclear Information System (INIS)

Paik, Man Jeong; Nguyen, Duc Toan; Cho, In Seon; Kim, Kyoung Rae; Cho, Ki Hong; Choi, Sang Dun; Lee, Gwang; Yoon, Jae Hwan; Shim, Woo Young

2011-01-01

A new analytical method for measurement of 3,4-dihydroxyphenylalanine (DOPA) in human urine was developed. DOPA from an aqueous solution was converted into an ethoxycarbonyl (EOC) derivative. A tertbutyldimethylsilyl (TBDMS) reaction under anhydrous conditions was then attempted for analysis by gas chromatography-mass spectrometry in selected ion monitoring mode. A new mass spectral data on DOPA as a tri-EOC/mono-TBDMS derivative was built. This method showed good linearity (r ≥ 0.999), precision (% relative standard deviation = 3.1-9.2), and accuracy (% relative error = .7.2-8.8), with a detection limit of 0.05 ng/mL. This selective and accurate method of DOPA analysis will be useful for biochemical monitoring of various neurological disorders including Parkinson's disease in biological fluids

On Derivations of Operator Algebras with Involution

Directory of Open Access Journals (Sweden)

Širovnik Nejc

2014-12-01

Full Text Available The purpose of this paper is to prove the following result. Let X be a complex Hilbert space, let L(X be an algebra of all bounded linear operators on X and let A(X ⊂ L(X be a standard operator algebra, which is closed under the adjoint operation. Suppose there exists a linear mapping D : A(X → L(X satisfying the relation 2D(AA*A = D(AA*A + AA*D(A + D(AA*A + AD(A*A for all A ∈ A(X. In this case, D is of the form D(A = [A,B] for all A ∈ A(X and some fixed B ∈ L(X, which means that D is a derivation.

Experimental standard molar enthalpies of formation of some methylbenzenediol isomers

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Lobo Ferreira, Ana I.M.C.

2009-01-01

The present work is part of a research program on the energetics of formation of alkyl substituted benzenediols, aiming the study of the enthalpic effect of the introduction of methyl substituents into benzenediols. In this work we present the results of the thermochemical research on 2-methylresorcinol, 3-methylresorcinol, 4-methylresorcinol, and methylhydroquinone. The standard (p 0 =0.1MPa) molar enthalpies of formation, in the crystalline phase, at T = 298.15 K, of the compounds mentioned above were derived from their standard massic energies of combustion, measured by static-bomb combustion calorimetry, while the standard molar enthalpies of sublimation of those compounds were obtained by the temperature dependence of their vapour pressures determined by the Knudsen effusion technique. From experimental values, the standard molar enthalpies of formation of the studied methylbenzenediols in the gaseous phase, at T = 298.15 K were then derived. The results are interpreted in terms of structural contributions to the energetics of the substituted benzenediols and compared with the same parameters estimated from the Cox Scheme. Moreover, the standard (p 0 =0.1MPa) molar enthalpies, entropies, and Gibbs energies of sublimation, at T = 298.15 K, were derived for the four isomers of methylbenzenediols.

The in Vitro Structure-Related Anti-Cancer Activity of Ginsenosides and Their Derivatives

Directory of Open Access Journals (Sweden)

Liang Liu

2011-12-01

Full Text Available Panax ginseng has long been used in Asia as a herbal medicine for the prevention and treatment of various diseases, including cancer. The current study evaluated the cytotoxic potency against a variety of cancer cells by using ginseng ethanol extracts (RSE, protopanaxadiol (PPD-type, protopanaxatriol (PPT-type ginsenosides fractions, and their hydrolysates, which were prepared by stepwise hydrolysis of the sugar moieties of the ginsenosides. The results showed that the cytotoxic potency of the hydrolysates of RSE and total PPD-type or PPT-type ginsenoside fractions was much stronger than the original RSE and ginsenosides; especially the hydrolysate of PPD-type ginsenoside fractions. Subsequently, two derivatives of protopanaxadiol (1, compounds 2 and 3, were synthesized via hydrogenation and dehydration reactions of compound 1. Using those two derivatives and the original ginsenosides, a comparative study on various cancer cell lines was conducted; the results demonstrated that the cytotoxic potency was generally in the descending order of compound 3 > 20(S-dihydroprotopanaxadiol (2 > PPD (1 > 20(S-Rh2 > 20(R-Rh2 ≈ 20(R-Rg3 ≈ 20(S-Rg3. The results clearly indicate the structure-related activities in which the compound with less polar chemical structures possesses higher cytotoxic activity towards cancer cells.

Derivation and analysis of cross relations of photosynthesis and respiration across at FLUXNET sites for model improvement

Science.gov (United States)

Lasslop, G.; Reichstein, M.; Papale, D.; Richardson, A. D.

2009-12-01

The FLUXNET database provides measurements of the net ecosystem exchange (NEE) of carbon across vegetation types and climate regions. To simplify the interpretation in terms of processes the net exchange is frequently split up into the two main components: gross primary production (GPP) and ecosystem respiration (Reco). A strong relation between these two fluxes related derived from eddy covariance data was found across temporal scales and is to be expected as variation in recent photosynthesis is known to be correlated with root respiration; plants use energy from photosynthesis to drive the metabolism. At long time scales, substrate availability (constrained by past productivity) limits the whole-ecosystem respiration. Previous studies exploring this relationship relied on GPP and Reco estimates derived from the same data, this may lead to spurious correlation that must not be interpreted ecologically. In this study we use two estimates derived from disjunct datasets, one based on daytime data, the other on nighttime data and explore the reliability and robustness of this relationship. We find distinct relationship between the two, varying between vegetation types but also across temporal and spatial scales. We also infer that spatial and temporal variability of net ecosystem exchange is driven by GPP in many cases. Exceptions to this rule include for example disturbed sites. We advocate that for model calibration and evaluation not only the fluxes itself but also robust patterns between fluxes that can be extracted from the database, for instance between the flux components, should be considered.

Sustainability of a public system for plasma collection, contract fractionation and plasma-derived medicinal product manufacturing.

Science.gov (United States)

Grazzini, Giuliano; Ceccarelli, Anna; Calteri, Deanna; Catalano, Liviana; Calizzani, Gabriele; Cicchetti, Americo

2013-09-01

In Italy, the financial reimbursement for labile blood components exchanged between Regions is regulated by national tariffs defined in 1991 and updated in 1993-2003. Over the last five years, the need for establishing standard costs of healthcare services has arisen critically. In this perspective, the present study is aimed at defining both the costs of production of blood components and the related prices, as well as the prices of plasma-derived medicinal products obtained by national plasma, to be used for interregional financial reimbursement. In order to analyse the costs of production of blood components, 12 out 318 blood establishments were selected in 8 Italian Regions. For each step of the production process, driving costs were identified and production costs were. To define the costs of plasma-derived medicinal products obtained by national plasma, industrial costs currently sustained by National Health Service for contract fractionation were taken into account. The production costs of plasma-derived medicinal products obtained from national plasma showed a huge variability among blood establishments, which was much lower after standardization. The new suggested plasma tariffs were quite similar to those currently in force. Comparing the overall costs theoretically sustained by the National Health Service for plasma-derived medicinal products obtained from national plasma to current commercial costs, demonstrates that the national blood system could gain a 10% cost saving if it were able to produce plasma for fractionation within the standard costs defined in this study. Achieving national self-sufficiency through the production of plasma-derived medicinal products from national plasma, is a strategic goal of the National Health Service which must comply not only with quality, safety and availability requirements but also with the increasingly pressing need for economic sustainability.

Decommissioning standards

International Nuclear Information System (INIS)

Crofford, W.N.

1980-01-01

EPA has agreed to establish a series of environmental standards for the safe disposal of radioactive waste through participation in the Interagency Review Group on Nuclear Waste Management (IRG). One of the standards required under the IRG is the standard for decommissioning of radioactive contaminated sites, facilities, and materials. This standard is to be proposed by December 1980 and promulgated by December 1981. Several considerations are important in establishing these standards. This study includes discussions of some of these considerations and attempts to evaluate their relative importance. Items covered include: the form of the standards, timing for decommissioning, occupational radiation protection, costs and financial provisions. 4 refs

Economic competitiveness gap related to the application of the GAEC standards of cross-compliance on farms: evaluation methodology

Directory of Open Access Journals (Sweden)

Marco Fedrizzi

2015-12-01

Full Text Available This paper describes the methods used in the monitoring carried out in the farms of the MO.NA.CO. project, to calculate the economic competitiveness gap faced by agricultural holdings that accede to the commitments imposed by the standards included in the project. The monitoring works were performed in agricultural holdings in relation to the particular reference condition of each standard. The processing of the information acquired allowed us to define the working times of each cultivation operation by means of the indications in the recommendations of the Associazione Italiana di Genio Rurale - Italian Rural Engineering Association, that considers the official methodology of the International Commission of the Organisation Scientifique du Travail en Agriculture (C.I.O.S.T.A.. The overall costs and revenues in case of compliance or non-compliance with the commitments of the standard were calculated by using Biondi’s methodology and other norms that indicate the technical and economic coefficients to be used in the calculations (EP 496.2 and D 497.4 ASAE standards. With the data related to the unit cost of ploughing a model Partial Least Squares (PLS has been achieved and validated, and it makes possible to predict the unit cost of this agricultural operation. Finally, the values of the variation of the economic competitiveness gap are reported for each standard.

[Possible relation between clinical guidelines and legal standard of medicine].

Science.gov (United States)

Furukawa, Toshiharu; Kitagawa, Yuko

2010-10-01

Legal standard of medicine is not equal across the all kinds of medical institutions. Each medical institution is required its respective standard of medicine in which its doctors are expected to have studied medical informations, which have been spread among medical institutions with similar characteristics. Therefore, in principle, clinical guidelines for the treatment of a disease formed by public committees do not directly become the medical standards of respective disease treatment. However, doctors would be legally required to practice medicine with reference to the clinical guidelines because medical informations, mediated by internet or many kinds of media, have been spread very fast to all medical institutions these days. Moreover, doctors would be required to inform their patients of non-standardized new treatments, even if such treatments are not listed in clinical guidelines in case patients have special concern about new treat-

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

Science.gov (United States)

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-10-01

To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

Science.gov (United States)

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-01-01

Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

Biomass-burning derived aromatic acids in NIST standard reference material 1649b and the environmental implications

Science.gov (United States)

Gao, Shaopeng; Xu, Baiqing; Dong, Xueling; Zheng, Xiaoyan; Wan, Xin; Kang, Shichang; Song, Qiuyin; Kawamura, Kimitaka; Cong, Zhiyuan

2018-07-01

Biomass burning is a serious problem in the environment and climate system. However, the source identification of biomass-burning aerosols was somewhat impeded, partly due to the difficulty in quantification of relevant molecular markers. In this study, we present reference values for five aromatic acids (including p-hydroxybenzoic, vanillic, dehydroabietic, syringic and p-coumaric acids) in the NIST Standard Reference Material (SRM) 1649b. The concentration of levoglucosan was also revisited. Notable positive matrix effect was found for vanillic, dehydroabietic, syringic and coumaric acid. Using the standard addition method, the average value of p-hydroxybenzoic, vanillic, syringic, dehydroabietic and p-coumaric acids in SRM 1649b were found to be 26.9, 9.53, 1.13, 7.60 and 1.66 μg g-1, respectively. The analytical method developed in this study was also applied to the PM10 samples from Beijing and PM2.5 samples from South Asia (Godavari, Nepal). The ratios of vanillic to p-hydroxybenzoic acid and syringic to vanillic acid further suggested that their biomass-burning types are mainly related to hard wood and herbaceous species (i.e., agricultural residues).

International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

Science.gov (United States)

Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

2013-12-01

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

Relating road salt to exceedances of the water quality standard for chloride in New Hampshire streams.

Science.gov (United States)

Trowbridge, Philip R; Kahl, J Steve; Sassan, Dari A; Heath, Douglas L; Walsh, Edward M

2010-07-01

Six watersheds in New Hampshire were studied to determine the effects of road salt on stream water quality. Specific conductance in streams was monitored every 15 min for one year using dataloggers. Chloride concentrations were calculated from specific conductance using empirical relationships. Stream chloride concentrations were directly correlated with development in the watersheds and were inversely related to streamflow. Exceedances of the EPA water quality standard for chloride were detected in the four watersheds with the most development. The number of exceedances during a year was linearly related to the annual average concentration of chloride. Exceedances of the water quality standard were not predicted for streams with annual average concentrations less than 102 mg L(-1). Chloride was imported into three of the watersheds at rates ranging from 45 to 98 Mg Cl km(-2) yr(-1). Ninety-one percent of the chloride imported was road salt for deicing roadways and parking lots. A simple, mass balance equation was shown to predict annual average chloride concentrations from streamflow and chloride import rates to the watershed. This equation, combined with the apparent threshold for exceedances of the water quality standard, can be used for screening-level TMDLs for road salt in impaired watersheds.

An inverse method based on finite element model to derive the plastic flow properties from non-standard tensile specimens of Eurofer97 steel

Directory of Open Access Journals (Sweden)

S. Knitel

2016-12-01

Full Text Available A new inverse method was developed to derive the plastic flow properties of non-standard disk tensile specimens, which were so designed to fit irradiation rods used for spallation irradiations in SINQ (Schweizer Spallations Neutronen Quelle target at Paul Scherrer Institute. The inverse method, which makes use of MATLAB and the finite element code ABAQUS, is based upon the reconstruction of the load-displacement curve by a succession of connected small linear segments. To do so, the experimental engineering stress/strain curve is divided into an elastic and a plastic section, and the plastic section is further divided into small segments. Each segment is then used to determine an associated pair of true stress/plastic strain values, representing the constitutive behavior. The main advantage of the method is that it does not rely on a hypothetic analytical expression of the constitutive behavior. To account for the stress/strain gradients that develop in the non-standard specimen, the stress and strain were weighted over the volume of the deforming elements. The method was validated with tensile tests carried out at room temperature on non-standard flat disk tensile specimens as well as on standard cylindrical specimens made of the reduced-activation tempered martensitic steel Eurofer97. While both specimen geometries presented a significant difference in terms of deformation localization during necking, the same true stress/strain curve was deduced from the inverse method. The potential and usefulness of the inverse method is outlined for irradiated materials that suffer from a large uniform elongation reduction.

Evaluation of pulse oximeter derived photoplethysmographic signals for obstructive sleep apnea diagnosis.

Science.gov (United States)

Li, Yan; Gao, He; Ma, Yan

2017-05-01

High prevalence of obstructive sleep apnea (OSA) has increased the demands for more convenient and accessible diagnostic devices other than standard in-lab polysomnography (PSG). Despite the increasing utility of photoplethysmograph (PPG), it remains understudied in underserved populations. This study aimed to evaluate the reliability of a standard pulse oximeter system with an automated analysis based on the PPG signal for the diagnosis of OSA, as compared with PSG derived measures.Consecutive out-patients with suspect OSA completed a PPG monitoring simultaneous with an overnight in-lab standard PSG. Forty-nine OSA patients (38 males, age 43.5 ± 16.9 years, BMI 26.9 ± 0.5 kg/m) were included in this study. Automated analyses were based on PPG and oximetry signals only. The PPG calculated measures were compared with PSG derived measures for agreement tests.Respiratory events index derived from PPG significantly correlated with PSG-derived apnea-hypopnea index (r = 0.935, P oximeter system with PPG recording can be used for the diagnosis or screening of OSA in high risk population.

Standard practice for determining relative image quality response of industrial radiographic imaging systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This standard provides a practice whereby industrial radiographic imaging systems may be comparatively assessed using the concept of relative image quality response (RIQR). The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E 1025 and subsection 5.2 of this practice. Figure 1 illustrates a relative image quality indicator (RIQI) that has four different steel plaque thicknesses (.015, .010, .008, and .005 in.) sequentially positioned (from top to bottom) on a ¾-in. thick steel plate. The four plaques contain a total of 14 different arrays of penetrameter-type hole sizes designed to render varied conditions of threshold visibility ranging from 1.92 % EPS (at the top) to .94 % EPS (at the bottom) when exposed to nominal 200 keV X-ray radiation. Each “EPS” array consists of 30 identical holes; thus, providing the user with a quantity of threshold sensitivity levels suitable for relative image qualitative response com...

78 FR 57445 - Charging Standard Administrative Fees for Nonprogram-Related Information

Science.gov (United States)

2013-09-18

... the Federal Register a schedule of standardized administrative fees we charge to recover the full cost... fee schedule is outdated and incongruent with the agency's current costs for this service. New... new standard fee on our most recent cost calculations for supplying this information and the standard...

An endogenous standard, radioisotopic ratio method in NAA

International Nuclear Information System (INIS)

Byrne, A.R.; Dermelj, M.

1997-01-01

A derivative form of NAA is proposed which is based on the use of an endogenous internal standard of already known concentration in the sample. If a comparator with a known ratio of the determinand and endogenous standard are co-irradiated with the sample, the determinand concentration is derived in terms of the endogenous standard concentration and the activity ratios of the two induced nuclides in the sample and comparator. As well as eliminating the sample mass and greatly reducing errors caused by pulse pile-up and geometrical differences, it was shown that in the radiochemical mode, if the endogenous standard is chosen so that the induced activity is radioisotopic with that from the determinand, the radiochemical yield is also eliminated and the risk non-achievement of isotopic exchange greatly reduced. The method is demonstrated with good results on reference materials for the determination of I, Mn and Ni. The advantages and disadvantages of this approach are discussed. It is suggested that it may be of application in quality control and in extending the range of certified elements in reference materials. (author)

Biomarker-indicated extent of oxidation of plant-derived organic carbon (OC) in relation to geomorphology in an arsenic contaminated Holocene aquifer, Cambodia.

Science.gov (United States)

Magnone, Daniel; Richards, Laura A; Polya, David A; Bryant, Charlotte; Jones, Merren; van Dongen, Bart E

2017-10-12

The poisoning of rural populations in South and Southeast Asia due to high groundwater arsenic concentrations is one of the world's largest ongoing natural disasters. It is important to consider environmental processes related to the release of geogenic arsenic, including geomorphological and organic geochemical processes. Arsenic is released from sediments when iron-oxide minerals, onto which arsenic is adsorbed or incorporated, react with organic carbon (OC) and the OC is oxidised. In this study we build a new geomorphological framework for Kandal Province, a highly studied arsenic affected region of Cambodia, and tie this into wider regional environmental change throughout the Holocene. Analyses shows that the concentration of OC in the sediments is strongly inversely correlated to grainsize. Furthermore, the type of OC is also related to grain size with the clay containing mostly (immature) plant derived OC and sand containing mostly thermally mature derived OC. Finally, analyses indicate that within the plant derived OC relative oxidation is strongly grouped by stratigraphy with the older bound OC more oxidised than younger OC.

Prevalence and Effectiveness of Derivatives Usage among Listed Nonfinancial Malaysian Firms

OpenAIRE

Lee, Simmon Kok Hui

2014-01-01

Derivatives had been a ‘dirty’ word among financial markets ever since the Financial Crisis of 2007-2009. Since then, there has been increased fear among managers that derivatives may cause more harm than good to their firms. Financial authorities and standard setters have rushed to implement more stringent and transparent requirements for the reporting of derivative positions in firms’ financial statements. It is important for managers to realize the positive potential from using derivatives...

Processes in the development of international specialist competencies and standards: the Sports Physiotherapy for All Project.

Science.gov (United States)

Bulley, Catherine; Donaghy, Marie

2008-01-01

In a world of rapidly developing knowledge it is important that professions describe their roles and capabilities. The need for a thorough description of sports physiotherapy was addressed through collaboration between the International Federation of Sports Physiotherapy (IFSP) and five European higher education institutions. This resulted in the Sports Physiotherapy for All Project, which has been successful in developing internationally accepted competencies and standards for sports physiotherapists. This article describes and reflects on the process to communicate useful lessons. A competency model was chosen to facilitate differentiation and communication of aspects of sports physiotherapy practice. Documentation relating to sports physiotherapy practice was collected from 16 countries and analysed thematically. A cut and paste method was used by a panel of experts to allocate themes to areas of practice within the competency model. Theme groups were used to select areas of practice for description in competency form. Standards were derived from competencies following in depth discussion with the expert panel, and triangulation with themes derived from international documentation. A rigorous process of international review and revision led to the final list of 11 competencies and related standards, both accepted by the IFSP. This work provides a foundation for the development of an audit toolkit to guide demonstration and evaluation of competencies and standards. This provides a foundation for targeted career development activities, appropriate provision of training opportunities, and quality enhancement. The experiences gained during this project can inform other health professions and their specialisms when embarking on a similar journey.

Students as Non-Standard Employees. Exploring Work Related Issues in Students’ Perceptions on their Term-time Job

DEFF Research Database (Denmark)

Winkler, Ingo

2008-01-01

and training opportunities, students’ relations to other employees, and social integration. By adopting a qualitative design, I was able to emphasize the subjective perspective of students describing their very own experiences as flexible workers. The study revealed various perceptions of students working...... as flexible employees and related this picture to current empirical and theoretical research in the field of non-standard employment....

Derivation of the phase field equations from the thermodynamic extremal principle

International Nuclear Information System (INIS)

Svoboda, J.; Fischer, F.D.; McDowell, D.L.

2012-01-01

Thermodynamics employs quantities that characterize the state of the system and provides driving forces for system evolution. These quantities can be applied by means of the thermodynamic extremal principle to obtain models and consequently constitutive equations for the evolution of the thermodynamic systems. The phase field method is a promising tool for simulation of the microstructure evolution in complex systems but introduces several parameters that are not standard in thermodynamics. The purpose of this paper is to show how the phase field method equations can be derived from the thermodynamic extremal principle, allowing the common treatment of the phase field parameters together with standard thermodynamic parameters in future applications. Fixed values of the phase field parameters may, however, not guarantee fixed values of thermodynamic parameters. Conditions are determined, for which relatively stable values of the thermodynamic parameters are guaranteed during phase field method simulations of interface migration. Finally, analytical relations between the thermodynamic and phase field parameters are found and verified for these simulations. A slight dependence of the thermodynamic parameters on the driving force is determined for the cases examined.

Relative resilience to noise of standard and sequential approaches to measurement-based quantum computation

Science.gov (United States)

Gallagher, C. B.; Ferraro, A.

2018-05-01

A possible alternative to the standard model of measurement-based quantum computation (MBQC) is offered by the sequential model of MBQC—a particular class of quantum computation via ancillae. Although these two models are equivalent under ideal conditions, their relative resilience to noise in practical conditions is not yet known. We analyze this relationship for various noise models in the ancilla preparation and in the entangling-gate implementation. The comparison of the two models is performed utilizing both the gate infidelity and the diamond distance as figures of merit. Our results show that in the majority of instances the sequential model outperforms the standard one in regard to a universal set of operations for quantum computation. Further investigation is made into the performance of sequential MBQC in experimental scenarios, thus setting benchmarks for possible cavity-QED implementations.

General relativity with applications to astrophysics

CERN Document Server

Straumann, Norbert

2004-01-01

This text provides a comprehensive and timely introduction to general relativity The foundations of the theory in Part I are thoroughly developed together with the required mathematical background from differential geometry in Part III The six chapters in Part II are devoted to tests of general relativity and to many of its applications Binary pulsars are studied in considerable detail Much space is devoted to the study of compact objects, especially to black holes This includes a detailed derivation of the Kerr solution, Israel's proof of his uniqueness theorem, and derivations of the basic laws of black hole physics The final chapter of this part contains Witten's proof of the positive energy theorem The book addresses undergraduate and graduate students in physics, astrophysics and mathematics It is very well structured and should become a standard text for a modern treatment of gravitational physics The clear presentation of differential geometry makes it also useful for string theory and other fields of ...

Quantifying cause-related mortality by weighting multiple causes of death

Science.gov (United States)

Moreno-Betancur, Margarita; Lamarche-Vadel, Agathe; Rey, Grégoire

2016-01-01

Abstract Objective To investigate a new approach to calculating cause-related standardized mortality rates that involves assigning weights to each cause of death reported on death certificates. Methods We derived cause-related standardized mortality rates from death certificate data for France in 2010 using: (i) the classic method, which considered only the underlying cause of death; and (ii) three novel multiple-cause-of-death weighting methods, which assigned weights to multiple causes of death mentioned on death certificates: the first two multiple-cause-of-death methods assigned non-zero weights to all causes mentioned and the third assigned non-zero weights to only the underlying cause and other contributing causes that were not part of the main morbid process. As the sum of the weights for each death certificate was 1, each death had an equal influence on mortality estimates and the total number of deaths was unchanged. Mortality rates derived using the different methods were compared. Findings On average, 3.4 causes per death were listed on each certificate. The standardized mortality rate calculated using the third multiple-cause-of-death weighting method was more than 20% higher than that calculated using the classic method for five disease categories: skin diseases, mental disorders, endocrine and nutritional diseases, blood diseases and genitourinary diseases. Moreover, this method highlighted the mortality burden associated with certain diseases in specific age groups. Conclusion A multiple-cause-of-death weighting approach to calculating cause-related standardized mortality rates from death certificate data identified conditions that contributed more to mortality than indicated by the classic method. This new approach holds promise for identifying underrecognized contributors to mortality. PMID:27994280

Standard on microbiological management of fluids for hemodialysis and related therapies by the Japanese Society for Dialysis Therapy 2008.

Science.gov (United States)

Kawanishi, Hideki; Akiba, Takashi; Masakane, Ikuto; Tomo, Tadashi; Mineshima, Michio; Kawasaki, Tadayuki; Hirakata, Hideki; Akizawa, Tadao

2009-04-01

The Committee of Scientific Academy of the Japanese Society for Dialysis Therapy (JSDT) proposes a new standard on microbiological management of fluids for hemodialysis and related therapies. This standard is within the scope of the International Organization for Standardization (ISO), which is currently under revision. This standard is to be applied to the central dialysis fluid delivery systems (CDDS), which are widely used in Japan. In this standard, microbiological qualities for dialysis water and dialysis fluids are clearly defined by endotoxin level and bacterial count. The qualities of dialysis fluids were classified into three levels: standard, ultrapure, and online prepared substitution fluid. In addition, the therapeutic application of each dialysis fluid is clarified. Since high-performance dialyzers are frequently used in Japan, the standard recommends that ultrapure dialysis fluid be used for all dialysis modalities at all dialysis facilities. It also recommends that the dialysis equipment safety management committee at each facility should validate the microbiological qualities of online prepared substitution fluid.

Modernized Techniques for Dealing with Quality Data and Derived Products

Science.gov (United States)

Neiswender, C.; Miller, S. P.; Clark, D.

2008-12-01

"I just want a picture of the ocean floor in this area" is expressed all too often by researchers, educators, and students in the marine geosciences. As more sophisticated systems are developed to handle data collection and processing, the demand for quality data, and standardized products continues to grow. Data management is an invisible bridge between science and researchers/educators. The SIOExplorer digital library presents more than 50 years of ocean-going research. Prior to publication, all data is checked for quality using standardized criterion developed for each data stream. Despite the evolution of data formats and processing systems, SIOExplorer continues to present derived products in well- established formats. Standardized products are published for each cruise, and include a cruise report, MGD77 merged data, multi-beam flipbook, and underway profiles. Creation of these products is made possible by processing scripts, which continue to change with ever-evolving data formats. We continue to explore the potential of database-enabled creation of standardized products, such as the metadata-rich MGD77 header file. Database-enabled, automated processing produces standards-compliant metadata for each data and derived product. Metadata facilitates discovery and interpretation of published products. This descriptive information is stored both in an ASCII file, and a searchable digital library database. SIOExplorer's underlying technology allows focused search and retrieval of data and products. For example, users can initiate a search of only multi-beam data, which includes data-specific parameters. This customization is made possible with a synthesis of database, XML, and PHP technology. The combination of standardized products and digital library technology puts quality data and derived products in the hands of scientists. Interoperable systems enable distribution these published resources using technology such as web services. By developing modernized

Delivering environmental benefit from the use of Environmental Quality Standards: why we need to focus on implementation.

Science.gov (United States)

Merrington, Graham; Peters, Adam; Whitehouse, Paul; Clarke, Robin; Merckel, Dan

2018-02-01

The UK has adopted a broader approach to the introduction of Environmental Quality Standard (EQS) for the aquatic environment than many other jurisdictions around the world, with a greater focus on the implementation of scientifically derived standards. This follows the publication of a report by the Royal Commission on Environmental Pollution in 1998 which drew attention to the need to recognise that whilst an EQS is often just viewed as a numerical value, it also has other important characteristics that need to be recognised if it is to be a practical and effective regulatory tool. One of the aspects that has not always been recognised was that of implementation assessment, i.e. the steps needed to ensure that a standard actually delivers environmental benefit or improvements. In many jurisdictions, there is considerable technical and sometimes political emphasis on the numerical value of the EQS (e.g. the critical concentration in an environmental matrix like water), including the method of derivation, the scrutiny of the reliability and relevance of the ecotoxicity test data and extensive deliberations of unquantified uncertainties in relation to the choice of assessment factor. The regulatory value of an EQS only comes through a comparison against a measured environmental concentration, yet only relatively limited regulatory effort has historically been expended on this component of the classic environmental risk assessment paradigm. For example, there needs to be an acceptable (i.e. small) uncertainty in the EQS, an appropriate analytical method and detection limit in the correct matrix, a method to deliver a comparison with the EQS and a robust statistical method to draw unbiased conclusions about environmental risk. In addition, we argue that there is a case for checking the consequences of introducing a standard against field data, wherever possible. This validation of the EQS rarely happens currently. We explain what implementation assessment is and why

A generalized non-Gaussian consistency relation for single field inflation

Science.gov (United States)

Bravo, Rafael; Mooij, Sander; Palma, Gonzalo A.; Pradenas, Bastián

2018-05-01

We show that a perturbed inflationary spacetime, driven by a canonical single scalar field, is invariant under a special class of coordinate transformations together with a field reparametrization of the curvature perturbation in co-moving gauge. This transformation may be used to derive the squeezed limit of the 3-point correlation function of the co-moving curvature perturbations valid in the case that these do not freeze after horizon crossing. This leads to a generalized version of Maldacena's non-Gaussian consistency relation in the sense that the bispectrum squeezed limit is completely determined by spacetime diffeomorphisms. Just as in the case of the standard consistency relation, this result may be understood as the consequence of how long-wavelength modes modulate those of shorter wavelengths. This relation allows one to derive the well known violation to the consistency relation encountered in ultra slow-roll, where curvature perturbations grow exponentially after horizon crossing.

The COS Method : An Efficient Fourier Method for Pricing Financial Derivatives

NARCIS (Netherlands)

Fang, F.

2010-01-01

When valuing and risk-managing financial derivatives, practitioners demand fast and accurate prices and sensitivities. Aside from the pricing of non-standard exotic financial derivatives, so-called plain vanilla European options form the basis for the calibration of financial models. As any pricing

Standard molar enthalpy of formation of methoxyacetophenone isomers

International Nuclear Information System (INIS)

Amaral, Luísa M.P.F.; Morais, Victor M.F.; Ribeiro da Silva, Manuel A.V.

2014-01-01

Highlights: • Experimental and computational energetic study of methoxyacetophenone isomers. • Enthalpies of formation and phase transition determined by calorimetric techniques. • Quantum chemical calculations allowed estimation of enthalpies of formation. • Structure and energy correlations were established. - Abstract: Values of the standard (p o = 0.1 MPa) molar enthalpy of formation of 2′-, 3′- and 4′-methoxyacetophenones were derived from their standard molar energy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation/vaporization of the compounds studied. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and the standard molar enthalpies for the phase transition. The results obtained are −(232.0 ± 2.5), −(237.7 ± 2.7) and −(241.1 ± 2.1) kJ · mol −1 for 2′-, 3′- and 4′-methoxyacetophenone, respectively. Standard molar enthalpies of formation were also estimated from different methodologies: the Cox scheme as well as two different computational approaches using density functional theory-based B3LYP and the multilevel G3 methodologies

Relations between finite zero structure of the plant and the standard $H_\\infty$ controller order reduction

NARCIS (Netherlands)

Watanabe, Takao; Stoorvogel, Antonie Arij

2001-01-01

A relation between the finite zero structure of the plant and the standard $H_\\infty$ controller was studied. The mechanism was also investigated using the ARE-based $H_\\infty$ controller that is represented by a free parameter. It was observed that the mechanism of the controller reduction is

Evaluating Public Libraries Using Standard Scores: The Library Quotient.

Science.gov (United States)

O'Connor, Daniel O.

1982-01-01

Describes a method for assessing the performance of public libraries using a standardized scoring system and provides an analysis of public library data from New Jersey as an example. Library standards and the derivation of measurement ratios are also discussed. A 33-item bibliography and three data tables are included. (JL)

The legitimacy of transnational private governance arrangements related to nanotechnologies: the case of international organization for standardization

NARCIS (Netherlands)

Kica, Evisa

2015-01-01

The core of this thesis consists of developing a comprehensive empirical assessment on the legitimacy of nanotechnology related transnational private governance arrangements (TPGAs), explored through the case study of the International Organization for Standardization (ISO) Technical Committee on

Report of the Beyond the Standard Model Working Group of the 1999 UK Phenomenology Workshop on Collider Physics (Durham)

CERN Document Server

Allanach, Benjamin C; Dedes, A; Djouadi, Abdelhak; Grosse-Knetter, J; Hetherington, J; Heinemeyer, S; Holt, J; Hutchcroft, D E; Kalinowski, Jan; Kane, G; Kartvelishvili, V G; King, S F; Lola, S; McNulty, R; Parker, M A; Patel, G D; Ross, Graham G; Spira, Michael; Teixeira-Dias, P; Weiglein, Georg; Wilson, G; Womersley, J; Walker, P; Webber, Bryan R; Wyatt, T R

2000-01-01

The Beyond the Standard Model Working Group discussed a variety of topics relating to exotic searches at current and future colliders, and the phenomenology of current models beyond the Standard Model. For example, various supersymmetric (SUSY) and extra dimensions search possibilities and constraints are presented. Fine-tuning implications of SUSY searches are derived. The implications of Higgs (non)-discovery are discussed, as well as the program HDECAY. The individual contributions are included seperately. Much of the enclosed work is original, although some is reviewed.

Come-back of phenanthridine and phenanthridinium derivatives in the 21st century

Directory of Open Access Journals (Sweden)

Lidija-Marija Tumir

2014-12-01

Full Text Available Phenanthridine derivatives are one of the most intensively studied families of biologically active compounds with efficient DNA binding capability. Attracting attention since DNA structure discovery (1960s, they were early recognized as a symbol of DNA intercalative binding, for many decades applied as gold-standard DNA- and RNA-fluorescent markers (ethidium bromide, probes for cell viability (propidium iodide, but also “ill-famed” for various toxic (genotoxic and mutagenic effects. After two decades of low interest, the discovery of phenanthridine alkaloids and new studies of antiparasitic/antitumor properties of phenanthridine derivatives resulted in the strong increase of the scientific interest about the turn of this century. Here are summarized phenanthridine-related advances in the 21st century (2000-present period with emphasis on the supramolecular interactions and bioorganic chemistry, as well as novel or improved synthetic approaches.

The double radio-isotope derivative techniques for the assay of drugs in biological material

International Nuclear Information System (INIS)

Riess, W.

1977-01-01

The neuroleptic drug opipramol and its deshydroxyethyl metabolite can be determined simultaneously in the same biological sample. Known amounts of 14 C-labelled opipramol and 14 C-labelled metabolite are added to the sample to serve as internal standards. After suitable extraction, both compounds are acetylated by 3 H-labelled acetic anhydride. Together with μg-amounts of carrier compounds, the O-acetyl derivative of opipramol and the N-acetyl derivative of the metabolite are purified and separated by two-dimensional thin-layer chromatography. Each of the derivatives is isolated and counted for 14 C- and 3 H-activity. The 14 C-activities recovered serve to determine the overall yield of the opipramol and metabolite, and to convert the measured 3 H-activity to 100% theoretical yield. From analyses of standard samples, the specific 3 H-activities of the acetyl derivatives were calculated and these values were used to convert the measured 3 H-activites from biological samples to concentrations of original opipramol and metabolite. For both compounds the standard deviations of blank samples were +- 1 ng/ml. For concentrations up to 100 ng/ml the standard deviation was +- 3 ng/ml

Basic standards for radiation protection

International Nuclear Information System (INIS)

Webb, G.A.M.

1982-01-01

The basic standards for radiation protection have been based, for many years, on the recommendations of the International Commission of Radiological Protection. The three basic standards recommended by the Commission may be summarized as ''justification, optimization of protection and adherence to dose limitations. The applications of these basic principles to different aspects of protection are briefly summarized and the particular ways in which they have been applied to waste described in more detail. The application of dose limits, both in the control of occupational exposure and in regulating routine discharges of radioactive effluents is straight forward in principle although the measurement and calculational requirements may be substantial. Secondary standards such as derived limits may be extremely useful and the principles underlying their derivation will be described. Optimization of protection is inherently a more difficult concept to apply in protection and the various techniques used will be outlined by with particular emphasis on the use of cost benefit analysis are recommended by the ICRP. A review will be given of the problems involved in extending these basic concepts of the ICRP to probabilistic analyses such as those required for assessing the consequences of accidents or disruptive events in long term repositories. The particular difficulties posed by the very long timescales involved in the assessment of waste management practices will be discussed in some detail. (orig./RW)

Gas industry standards board: Legal considerations in the standard setting process

Energy Technology Data Exchange (ETDEWEB)

Mishkin, M.T.; Adelman, D.I.

1994-01-01

On December 23, 1993, the Federal Energy Regulatory Commission (FERC) issued Order 563, a Final Rule adopting the agreements of informal industry-wide working groups to standardize information relating to pipeline capacity release programs mandated under Order 636. Order 563 is noteworthy for its reliance upon the industry to develop consensus standards for Commission adoption. The industry's success in reaching agreements on key communication standards issues spawned recommendations from the working groups to continue the development and maintenance of industry-wide standards through a permanent Gas Industry Standards Board (GISB). This article examines legal issues bearing on GISB's potential role in the regulatory process. Specifically, this article addresses constitutional and statutory considerations relating to the FERC's authority to delegate certain responsibilities to a voluntary, industry sponsored and supported private body such as that taking shape within the gas industry.

The electrochemical Peltier heat of the standard hydrogen electrode reaction

International Nuclear Information System (INIS)

Fang Zheng; Wang Shaofen; Zhang Zhenghua; Qiu Guanzhou

2008-01-01

A method for measuring the electrochemical Peltier heat (EPH) of a single electrode reaction has been developed and an absolute scale is suggested to obtain EPH of the standard hydrogen electrode. The scale is based on φ 0 * = 0 and ΔS 0 * = 0 for any electrode reaction at zero Kelvin, in accord with the third law of thermodynamics. The relationships between entropy, enthalpy and free energy changes on this scale and on the conventional scale are derived. Calorimetric experiments were made on the Fe(CN) 6 3- /Fe(CN) 6 4- system at five different concentrations at 298.15 K, and EPH for the standard hydrogen electrode reaction is obtained. EPHs and the entropy change on the absolute scale for the studied redox are linearly related to concentration of electrolyte. The reversible electric work is almost concentration independent in the range of concentration studied

New conducted electrical weapons: Electrical safety relative to relevant standards.

Science.gov (United States)

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

Interest Rate Derivative Pricing with Stochastic Volatility

NARCIS (Netherlands)

Chen, B.

2012-01-01

One purpose of exotic derivative pricing models is to enable financial institutions to quantify and manage their financial risk, arising from large books of portfolios. These portfolios consist of many non-standard exotic financial products. Risk is managed by means of the evaluation of sensitivity

Standard cross-section data

International Nuclear Information System (INIS)

Carlson, A.D.

1984-01-01

The accuracy of neutron cross-section measurement is limited by the uncertainty in the standard cross-section and the errors associated with using it. Any improvement in the standard immediately improves all cross-section measurements which have been made relative to that standard. Light element, capture and fission standards are discussed. (U.K.)

Accounting for derivative contracts in an energy environment

International Nuclear Information System (INIS)

Lewthwaite, T.; Majid, H.; Swingler, N.

1999-01-01

This chapter reviews the latest developments in the accounting for derivative contracts in the energy environment, covering the US accounting and disclosure requirements and the Statement of Financial Accounting Standards (SFAS) 133 Accounting for Derivative Instruments and Hedging Activities, and the Emerging Issues Task Force Consensus (EITF) 98-10 accounting for energy trading and risk management activities. UK accounting and disclosure requirements and the international point of view are discussed. Three different types of hedges are described

Accounting for derivative contracts in an energy environment

Energy Technology Data Exchange (ETDEWEB)

Lewthwaite, T.; Majid, H.; Swingler, N. [Arthur Andersen (United Kingdom)

1999-07-01

This chapter reviews the latest developments in the accounting for derivative contracts in the energy environment, covering the US accounting and disclosure requirements and the Statement of Financial Accounting Standards (SFAS) 133 Accounting for Derivative Instruments and Hedging Activities, and the Emerging Issues Task Force Consensus (EITF) 98-10 accounting for energy trading and risk management activities. UK accounting and disclosure requirements and the international point of view are discussed. Three different types of hedges are described.

Limitations of the relative standard deviation of win percentages for measuring competitive balance in sports leagues

OpenAIRE

P. Dorian Owen

2009-01-01

The relative standard deviation of win percentages, the most widely used measure of within-season competitive balance, has an upper bound which is very sensitive to variation in the numbers of teams and games played. Taking into account this upper bound provides additional insight into comparisons of competitive balance across leagues or over time.

Personal Identification Based on Vectorcardiogram Derived from Limb Leads Electrocardiogram

Directory of Open Access Journals (Sweden)

Jongshill Lee

2012-01-01

Full Text Available We propose a new method for personal identification using the derived vectorcardiogram (dVCG, which is derived from the limb leads electrocardiogram (ECG. The dVCG was calculated from the standard limb leads ECG using the precalculated inverse transform matrix. Twenty-one features were extracted from the dVCG, and some or all of these 21 features were used in support vector machine (SVM learning and in tests. The classification accuracy was 99.53%, which is similar to the previous dVCG analysis using the standard 12-lead ECG. Our experimental results show that it is possible to identify a person by features extracted from a dVCG derived from limb leads only. Hence, only three electrodes have to be attached to the person to be identified, which can reduce the effort required to connect electrodes and calculate the dVCG.

Calibration of Flick standards

International Nuclear Information System (INIS)

Thalmann, Ruedi; Spiller, Jürg; Küng, Alain; Jusko, Otto

2012-01-01

Flick standards or magnification standards are widely used for an efficient and functional calibration of the sensitivity of form measuring instruments. The results of a recent measurement comparison have shown to be partially unsatisfactory and revealed problems related to the calibration of these standards. In this paper the influence factors for the calibration of Flick standards using roundness measurement instruments are discussed in detail, in particular the bandwidth of the measurement chain, residual form errors of the device under test, profile distortions due to the diameter of the probing element and questions related to the definition of the measurand. The different contributions are estimated using simulations and are experimentally verified. Also alternative methods to calibrate Flick standards are investigated. Finally the practical limitations of Flick standard calibration are shown and the usability of Flick standards both to calibrate the sensitivity of roundness instruments and to check the filter function of such instruments is analysed. (paper)

Adipose stromal cells contain phenotypically distinct adipogenic progenitors derived from neural crest.

Directory of Open Access Journals (Sweden)

Yoshihiro Sowa

Full Text Available Recent studies have shown that adipose-derived stromal/stem cells (ASCs contain phenotypically and functionally heterogeneous subpopulations of cells, but their developmental origin and their relative differentiation potential remain elusive. In the present study, we aimed at investigating how and to what extent the neural crest contributes to ASCs using Cre-loxP-mediated fate mapping. ASCs harvested from subcutaneous fat depots of either adult P0-Cre/or Wnt1-Cre/Floxed-reporter mice contained a few neural crest-derived ASCs (NCDASCs. This subpopulation of cells was successfully expanded in vitro under standard culture conditions and their growth rate was comparable to non-neural crest derivatives. Although NCDASCs were positive for several mesenchymal stem cell markers as non-neural crest derivatives, they exhibited a unique bipolar or multipolar morphology with higher expression of markers for both neural crest progenitors (p75NTR, Nestin, and Sox2 and preadipocytes (CD24, CD34, S100, Pref-1, GATA2, and C/EBP-delta. NCDASCs were able to differentiate into adipocytes with high efficiency but their osteogenic and chondrogenic potential was markedly attenuated, indicating their commitment to adipogenesis. In vivo, a very small proportion of adipocytes were originated from the neural crest. In addition, p75NTR-positive neural crest-derived cells were identified along the vessels within the subcutaneous adipose tissue, but they were negative for mural and endothelial markers. These results demonstrate that ASCs contain neural crest-derived adipocyte-restricted progenitors whose phenotype is distinct from that of non-neural crest derivatives.

Making standards work

OpenAIRE

Stigzelius, Ingrid

2009-01-01

Social and environmental standards can function as tools for companies that want to improve their conduct in social and environmental areas in the supply chain. However, relatively little attention has been given to how the adoption of social and environmental standards may influence the actual business practices in the supply chain. The overall aim of this thesis is to examine the institutional context surrounding the adoption of social and environmental standards and how these standards inf...

Derivation of residual radioactive material guidelines for the Laboratory for Energy-Related Health Research site

International Nuclear Information System (INIS)

Chapman, T.E.

1993-11-01

Residual radioactive material guidelines were derived for the Laboratory for Energy-Related Health Research (LEHR) Environmental Restoration (ER) site in Davis, California. The guideline derivation was based on a dose limit of 100 mrem/yr. The US Department of Energy (DOE) residual radioactive material guideline computer code was used in this evaluation. This code implements the methodology described in the DOE manual for implementing residual radioactive material guidelines. Three potential site utilization scenarios were considered with the assumption that following ER action, the site will be used without radiological restrictions. The defined scenarios vary with regard to use of the site, time spent at the site, and sources of food consumed. The results of the evaluation indicate that the basic dose limit of 100 mrem/yr will not be exceeded, provided that the soil concentrations of these radionuclides at the LEHR site do not exceed the scenario-specific values calculated by this study. Except for the extent of the contaminated zone (which is very conservative), assumptions used are as site-specific as possible, given available information. The derived guidelines are single- radionuclide guidelines and are linearly proportional to the dose limit used in the calculations. In setting the actual residual soil contamination guides for the LEHR site, DOE will apply the as low as reasonably achievable policy to the decision-making process, along with other factors such as whether a particular scenario is reasonable and appropriate, as well as using site-specific inputs to computer models based on data not yet fully determined

Standards related to harmonic disturbances and its evolution; La normalisation relative aux perturbations harmoniques et son evolution

Energy Technology Data Exchange (ETDEWEB)

Deflandre, T. [Electricite de France (EDF), 92 - Clamart (France). Direction des Etudes et Recherches

1996-09-01

The objective of this document is to provide an overview of the various normative documents and regulations that may be useful in the field of harmonics as references to a network user, fitter, manufacturer or operator. Several documents that are presently developed at Electricite de France are also presented, together with the connecting regulation that is included in the Emeraude contract. The following points are discussed: hierarchy of normative documents, harmonic emission standards and more especially the NF EN 610003-2 standards ``Limits for the emission of harmonic currents for equipment having an inrush current inferior or equal to 16 A per phase``; document status, immunity standards, compatibility and environment standards, documents under study and the Emeraude contract

Photochemistry and photopolymerisation activity of novel thioxanthone derivatives

International Nuclear Information System (INIS)

Nik Ghazali Salleh; Allen, N.S.; Edge, M.; Shah, M.; Green, A.

1999-01-01

In this paper, we aim to examine the influence of a range of 4-oxy substituted groups on the photochemical and photopolymerization of 1-chloro- and 1-phenylthio-thioxanhone. Here we have examined the effect of a number of acyloxy groups attached to the ring 4-position. The study includes a spectroscopic and photoinitiated polymerization evaluation using real time infrared and photocalorimetry. The photoactivities of the initiators are compared with those of the standard industrial system such as the 4-n-propoxy derivative and the basic compound like the 1-chloro-4-hydroxyl derivative which was used to synthesise all the derivatives examined here

Two-particle interference in standard and Bohmian quantum mechanics

International Nuclear Information System (INIS)

Guay, E; Marchildon, L

2003-01-01

The compatibility of standard and Bohmian quantum mechanics has recently been challenged in the context of two-particle interference, both from a theoretical and an experimental point of view. We analyse different setups proposed and derive corresponding exact forms for Bohmian equations of motion. The equations are then solved numerically, and shown to reproduce standard quantum-mechanical results

Impact of model uncertainty on soil quality standards for cadmium in rice paddy fields

International Nuclear Information System (INIS)

Roemkens, P.F.A.M.; Brus, D.J.; Guo, H.Y.; Chu, C.L.; Chiang, C.M.; Koopmans, G.F.

2011-01-01

At present, soil quality standards used for agriculture do not consider the influence of pH and CEC on the uptake of pollutants by crops. A database with 750 selected paired samples of cadmium (Cd) in soil and paddy rice was used to calibrate soil to plant transfer models using the soil metal content, pH, and CEC or soil Cd and Zn extracted by 0.01 M CaCl 2 as explanatory variables. The models were validated against a set of 2300 data points not used in the calibration. These models were then used inversely to derive soil quality standards for Japonica and Indica rice cultivars based on the food quality standards for rice. To account for model uncertainty, strict soil quality standards were derived considering a maximum probability that rice exceeds the food quality standard equal to 10 or 5%. Model derived soil standards based on Aqua Regia ranged from less than 0.3 mg kg -1 for Indica at pH 4.5 to more than 6 mg kg -1 for Japonica-type cultivars in clay soils at pH 7. Based on the CaCl 2 extract, standards ranged from 0.03 mg kg -1 Cd for Indica cultivars to 0.1 mg kg -1 Cd for Japonica cultivars. For both Japonica and Indica-type cultivars, the soil quality standards must be reduced by a factor of 2 to 3 to obtain the strict standards. The strong impact of pH and CEC on soil quality standards implies that it is essential to correct for soil type when deriving national or local standards. Validation on the remaining 2300 samples indicated that both types of models were able to accurately predict (> 92%) whether rice grown on a specific soil will meet the food quality standard used in Taiwan. - Research highlights: → Cadmium uptake by Japonica and Indica rice varieties depends on soil pH and CEC. → Food safety based soil standards range from 0.3 (Indica) to 6 mg kg -1 (Japonica). → Model uncertainty leads to strict soil standards of less than 0.1 mg kg -1 for Indica. → Soil pH and CEC should be considered to obtain meaningful standards for agriculture.

Quality Management Systems And Impact From Standardization In Albanian Companies

Directory of Open Access Journals (Sweden)

Ira Zoga Gjika

2015-08-01

Full Text Available The increase of competition in the local and regional markets is forcing companies to provide high quality products and services as well as to continuously improve their activities. The quality management systems and standard implementation in Albanian companies are the at the focus of this paper with the intention to evidence the actual situation and the results achieved from the certification process. The implementation of ISO standard requirements together with the assessment of the benefits deriving from it is a relatively new experience for Albanian companies and slightly developed in our economic literature. Consequently this work follows a combined approach of reviewing the relevant rich literature of the last decades with the empirical survey of some Albanian companies that have chosen ISO certification as an instrument to gain competitive advantage in the market. The analysis of factors that drive companies towards such time consuming costly and managerially- wise committed process is one of main study objectives. It is followed by the assessment of benefits deriving from this process for companies in quantitative and qualitative terms. Comparing the expected advantages from the certification with those actually obtained might assist companies themselves to improve their processes. From the other side this comparison serves as a basis for suggestions and recommendations to other companies that intend to make good use of advantages the ISO certification.

Vykazování finančních derivátů

OpenAIRE

Votoček, Filip

2009-01-01

Thesis is devoted to basic aspects of the reporting of financial derivatives. Mentioned is brief history and determination of term "derivative" from different points of view. Follows diversification of financial derivatives into groups. The main part is focused on reporting of fixed term contracts and options. Finally is described approach of International Financial Reporting Standards.

Standard model extended by a heavy singlet: Linear vs. nonlinear EFT

Energy Technology Data Exchange (ETDEWEB)

Buchalla, G., E-mail: gerhard.buchalla@lmu.de; Catà, O.; Celis, A.; Krause, C.

2017-04-15

We consider the Standard Model extended by a heavy scalar singlet in different regions of parameter space and construct the appropriate low-energy effective field theories up to first nontrivial order. This top-down exercise in effective field theory is meant primarily to illustrate with a simple example the systematics of the linear and nonlinear electroweak effective Lagrangians and to clarify the relation between them. We discuss power-counting aspects and the transition between both effective theories on the basis of the model, confirming in all cases the rules and procedures derived in previous works from a bottom-up approach.

CytometryML: a data standard which has been designed to interface with other standards

Science.gov (United States)

Leif, Robert C.

2007-02-01

Because of the differences in the requirements, needs, and past histories including existing standards of the creating organizations, a single encompassing cytology-pathology standard will not, in the near future, replace the multiple existing or under development standards. Except for DICOM and FCS, these standardization efforts are all based on XML. CytometryML is a collection of XML schemas, which are based on the Digital Imaging and Communications in Medicine (DICOM) and Flow Cytometry Standard (FCS) datatypes. The CytometryML schemas contain attributes that link them to the DICOM standard and FCS. Interoperability with DICOM has been facilitated by, wherever reasonable, limiting the difference between CytometryML and the previous standards to syntax. In order to permit the Resource Description Framework, RDF, to reference the CytometryML datatypes, id attributes have been added to many CytometryML elements. The Laboratory Digital Imaging Project (LDIP) Data Exchange Specification and the Flowcyt standards development effort employ RDF syntax. Documentation from DICOM has been reused in CytometryML. The unity of analytical cytology was demonstrated by deriving a microscope type and a flow cytometer type from a generic cytometry instrument type. The feasibility of incorporating the Flowcyt gating schemas into CytometryML has been demonstrated. CytometryML is being extended to include many of the new DICOM Working Group 26 datatypes, which describe patients, specimens, and analytes. In situations where multiple standards are being created, interoperability can be facilitated by employing datatypes based on a common set of semantics and building in links to standards that employ different syntax.

Determination of the relations governing the evolution of the standard deviations of the distribution of pollution

International Nuclear Information System (INIS)

Crabol, B.

1985-04-01

An original concept on the difference of behaviour of the high frequency (small-scale) and low frequency (large-scale) atmospheric turbulence relatively to the mean wind speed has been introduced. Through a dimensional analysis based on TAYLOR's formulation, it has been shown that the parameter of the atmospheric dispersion standard-deviations was the travel distance near the source, and the travel time far from the source. Using hypotheses on the energy spectrum in the atmosphere, a numerical application has made it possible to quantify the evolution of the horizontal standard deviation for different mean wind speeds between 0,2 and 10m/s. The areas of validity of the parameter (travel distance or travel time) are clearly shown. The first one is confined in the near field and is all the smaller if the wind speed decreases. For t > 5000s, the dependence on the wind speed of the horizontal standard-deviation expressed in function of the travel time becomes insignificant. The horizontal standard-deviation is only function of the travel time. Results are compared with experimental data obtained in the atmosphere. The similar evolution of the calculated and experimental curves confirms the validity of the hypothesis and input data in calculation. This study can be applied to radioactive effluents transport in the atmosphere

Non-standard employment relations and wages among school-leavers in the Netherlands

NARCIS (Netherlands)

de Vries, M.R.; Wolbers, M.H.J.

2005-01-01

Non-standard (alternatively, flexible) employment has become common in the Netherlands, and viewed as an important weapon for combating youth unemployment. However, if such jobs are 'bad', non-standard employment becomes a matter of concern. In addition, non-standard employment may hit the least

Customized vs INTERGROWTH-21st standards for the assessment of birthweight and stillbirth risk at term.

Science.gov (United States)

Francis, Andre; Hugh, Oliver; Gardosi, Jason

2018-02-01

Fetal growth abnormalities are linked to stillbirth and other adverse pregnancy outcomes, and use of the correct birthweight standard is essential for accurate assessment of growth status and perinatal risk. Two competing, conceptually opposite birthweight standards are currently being implemented internationally: customized gestation-related optimal weight (GROW) and INTERGROWTH-21 st . We wanted to compare their performance when applied to a multiethnic international cohort, and evaluate their usefulness in the assessment of stillbirth risk at term. We analyzed routinely collected maternity data from 10 countries with a total of 1.25 million term pregnancies in their respective main ethnic groups. The 2 standards were applied to determine small for gestational age (SGA) and large for gestational age (LGA) rates, with associated relative risk and population-attributable risk of stillbirth. The customized standard (GROW) was based on the term optimal weight adjusted for maternal height, weight, parity, and ethnic origin, while INTERGROWTH-21 st was a fixed standard derived from a multiethnic cohort of low-risk pregnancies. The customized standard showed an average SGA rate of 10.5% (range 10.1-12.7) and LGA rate of 9.5% (range 7.3-9.9) for the set of cohorts. In contrast, there was a wide variation in SGA and LGA rates with INTERGROWTH-21 st , with an average SGA rate of 4.4% (range 3.1-16.8) and LGA rate of 20.6% (range 5.1-27.5). This variation in INTERGROWTH-21 st SGA and LGA rates was correlated closely (R = ±0.98) to the birthweights predicted for the 10 country cohorts by the customized method to derive term optimal weight, suggesting that they were mostly due to physiological variation in birthweight. Of the 10.5% of cases defined as SGA according to the customized standard, 4.3% were also SGA by INTERGROWTH-21 st and had a relative risk of 3.5 (95% confidence interval, 3.1-4.1) for stillbirth. A further 6.3% (60% of the whole customized SGA) were not SGA

Synthesis, characterization and pharmacological evaluation of substituted phenoxy acetamide derivatives

Directory of Open Access Journals (Sweden)

Rani Priyanka

2015-01-01

Full Text Available A novel series of 2-(substituted phenoxy-N-(1,7,7-trimethylbicyclo[2.2.1]heptan-2-ylacetamide and N-(2-bromocyclohexyl-2-(substituted phenoxyacetamide derivatives having cyclohexyl nucleus as common in both types were synthesized and assessed for their anti-inflammatory activity by a carrageenan induced rat paw oedema method, analgesic activity by Eddy’s hot plate method and antipyretic activity by brewer’s yeast induced pyrexia method. All the novel derivatives have been synthesized by the reaction of camphor and similar ketone having cyclohexane nucleus (e.g. 2-bromocyclohexanone with ammonium carbonate and formic acid resulting in the formation of aromatic amines (1a-b. These amines on further chloroacetylation with chloroacetylchloride give compounds (2a-b. Compounds (2a-b are converted to 2-(substituted phenoxy-N-(1,7,7-trimethylbicyclo[2.2.1]heptan-2-yl acetamide and N-(2-bromocyclohexyl-2-(substituted phenoxyacetamide derivatives on treatment with substituted phenol. Among the series 3a-f, 3i, 3k, 3l compounds showed significant anti-inflammatory activity as compared to the standard drug diclofenac sodium and also compound 3a-f, 3h, 3j, 3k exhibit significant analgesic activity as compared to the standard drug. Compounds 3a-f and 3k showed antipyretic activity nearly to the standard drug indomethacin. Compounds 3a-f and 3k possess anti-inflammatory, analgesic and antipyretic activities near to the standard.

Substorm-related thermospheric density and wind disturbances derived from CHAMP observations

Directory of Open Access Journals (Sweden)

P. Ritter

2010-06-01

Full Text Available The input of energy and momentum from the magnetosphere is most efficiently coupled into the high latitude ionosphere-thermosphere. The phenomenon we are focusing on here is the magnetospheric substorm. This paper presents substorm related observations of the thermosphere derived from the CHAMP satellite. With its sensitive accelerometer the satellite can measure the air density and zonal winds. Based on a large number of substorm events the average high and low latitude thermospheric response to substorm onsets was deduced. During magnetic substorms the thermospheric density is enhanced first at high latitudes. Then the disturbance travels at an average speed of 650 m/s to lower latitudes, and 3–4 h later the bulge reaches the equator on the night side. Under the influence of the Coriolis force the travelling atmospheric disturbance (TAD is deflected westward. In accordance with present-day atmospheric models the disturbance zonal wind velocities during substorms are close to zero near the equator before midnight and attain moderate westward velocities after midnight. In general, the wind system is only weakly perturbed (Δvy<20 m/s by substorms.

Room-temperature Electrochemical Synthesis of Carbide-derived Carbons and Related Materials

Energy Technology Data Exchange (ETDEWEB)

Gogotsi, Yury [Drexel Univ., Philadelphia, PA (United States). Nanomaterials Group. Materials Science and Engineering Dept.

2015-02-28

This project addresses room-temperature electrochemical etching as an energy-efficient route to synthesis of 3D nanoporous carbon networks and layered 2D carbons and related structures, as well as provides fundamental understanding of structure and properties of materials produced by this method. Carbide-derived-carbons (CDCs) are a growing class of nanostructured carbon materials with properties that are desirable for many applications, such as electrical energy and gas storage. The structure of these functional materials is tunable by the choice of the starting carbide precursor, synthesis method, and process parameters. Moving from high-temperature synthesis of CDCs through vacuum decomposition above 1400°C and chlorination above 400°C, our studies under the previous DOE BES support led to identification of precursor materials and processing conditions for CDC synthesis at temperatures as low as 200°C, resulting in amorphous and highly reactive porous carbons. We also investigated synthesis of monolithic CDC films from carbide films at 250-1200°C. The results of our early studies provided new insights into CDC formation, led to development of materials for capacitive energy storage, and enabled fundamental understanding of the electrolyte ions confinement in nanoporous carbons.

A Lifecycle Approach to Brokered Data Management for Hydrologic Modeling Data Using Open Standards.

Science.gov (United States)

Blodgett, D. L.; Booth, N.; Kunicki, T.; Walker, J.

2012-12-01

The U.S. Geological Survey Center for Integrated Data Analytics has formalized an information management-architecture to facilitate hydrologic modeling and subsequent decision support throughout a project's lifecycle. The architecture is based on open standards and open source software to decrease the adoption barrier and to build on existing, community supported software. The components of this system have been developed and evaluated to support data management activities of the interagency Great Lakes Restoration Initiative, Department of Interior's Climate Science Centers and WaterSmart National Water Census. Much of the research and development of this system has been in cooperation with international interoperability experiments conducted within the Open Geospatial Consortium. Community-developed standards and software, implemented to meet the unique requirements of specific disciplines, are used as a system of interoperable, discipline specific, data types and interfaces. This approach has allowed adoption of existing software that satisfies the majority of system requirements. Four major features of the system include: 1) assistance in model parameter and forcing creation from large enterprise data sources; 2) conversion of model results and calibrated parameters to standard formats, making them available via standard web services; 3) tracking a model's processes, inputs, and outputs as a cohesive metadata record, allowing provenance tracking via reference to web services; and 4) generalized decision support tools which rely on a suite of standard data types and interfaces, rather than particular manually curated model-derived datasets. Recent progress made in data and web service standards related to sensor and/or model derived station time series, dynamic web processing, and metadata management are central to this system's function and will be presented briefly along with a functional overview of the applications that make up the system. As the separate

Uses of ANSI/HPS N13.12-1999, "Surface and Volume Radioactivity Standards for Clearance" and Comparison with Existing Standards

Energy Technology Data Exchange (ETDEWEB)

Stansbury, Paul S.; Strom, Daniel J.

2001-04-30

In August of 1999, the American National Standards Institute (ANSI) approved a standard for clearance of materials contaminated with residual levels of radioactivity. "Clearance," as used in the standard, means the movement of material from the control of a regulatory agency to a use or disposition that has no further regulatory controls of any kind. The standard gives derived screening levels (DSLs) in Bq/g and Bq/cm2 for 50 radionuclides. Items or materials with residual surface and volume radioactivity levels below the DSLs can be cleared, that is, managed without regard to their residual radioactivity. Since federal agencies are to use voluntary, industry standards developed by the private sector whenever possible, the standard should play an important role in DOE's regulatory process. The thrust of this report is to explain the standard, make simple observations on its usefulness to DOE, and to explore uses of the standard within DOE facilities beyond the clearance of radioactive materials.

Development of porcine transgenic nuclear-transferred embryos derived from fibroblast cells transfected by the novel technique of nucleofection or standard lipofection.

Science.gov (United States)

Skrzyszowska, M; Samiec, M; Słomski, R; Lipiński, D; Mały, E

2008-07-15

The aim of our study was to determine the in vitro developmental potential of porcine nuclear-transferred (NT) embryos that had been reconstructed with Tg(pWAPhGH-GFPBsd) transgene-expressing fibroblast cells. The gene construct was introduced into fibroblast cells by the novel method of nucleofection or standard lipofection. NT oocytes derived from foetal and adult dermal fibroblast cells were stimulated by either simultaneous fusion and electrical activation (Groups IA and IB) or sequential electrical and chemical activation (Groups IIA and IIB). The percentages of cloned embryos that reached the morula and blastocyst stages were 152/254 (59.8%) and 77/254 (30.3%) or 139/276 (50.4%) and 45/276 (16.3%) in Groups IA or IB, respectively. The rates of NT embryos that developed to the morula and blastocyst stages were 103/179 (57.5%) and 41/179 (22.9%) or 84/193 (43.5%) and 27/193 (14.0%) in Groups IIA and IIB, respectively. In conclusion, the in vitro developmental competences of porcine transgenic NT embryos that had been reconstructed with the Tg(pWAPhGH-GFPBsd) gene-transfected fibroblast cells were relatively high. Further, the nucleofection efficiency of all the porcine fibroblast cell lines as estimated by intra-vitam fluorescent evaluation based on the index of reporter eGFP transgene expression was nearly 100%. However, PCR analysis for transgene screening confirmed the absence of Tg(pWAPhGH-GFPBsd) fusion gene in some of the nucleofected cell lines. To our knowledge, the novel method of nucleofection is the first to transfect nuclear donor cells in the production of transgenic cloned embryos.

Recombinant-derived chicken growth hormone used for radioimmunoassay

International Nuclear Information System (INIS)

Proudman, J.A.

1984-01-01

The use of recombinant-derived chicken growth hormone (rcGH) in an avian growth hormone (GH) radioimmunoassay (RIA) procedure is described. Antiserum to turkey GH bound 125 I-labeled rcGH, and unlabeled rcGH or turkey GH displaced binding in a dose-related manner. The dose-response curves of sera and pituitary extract from chickens and turkeys were parallel to the rcGH standard curve. Sera from hypophysectomized (hypox) chickens and turkeys produced no dose-response and did not inhibit binding of labeled rcGH. Recovery of rcGH added to hypox sera was quantitative. Modification of the homologous turkey GH RIA protocol of Proudman and Wentworth (1) to use rcGH made possible either an increase in assay sensitivity or a 3-day reduction in incubation time

IPMA STANDARD ELEMENTS AND FEEDBACK IN PROJECT MANAGEMENT TEACHING

Directory of Open Access Journals (Sweden)

BARTOŠKA, Jan

2011-09-01

Full Text Available The paper proposes the concept of project management teaching including the International Project Management Association (IPMA standard. The concept of teaching is theoretical and derives from the notion of competence, which the IPMA standard is based on. The paper presents a brief description of the IPMA standard and endeavours to define the notion of competence. The competence is worked with in respect to hierarchical recognition. The proposed teaching concept works with the concepts of information, knowledge and skills. The teaching proposal stems from the structure and contents of the IPMA standard elements. Furthermore, the paper elaborates the issue of embedding the elements of the IPMA standard competences into training courses. In the article, the eye of the IPMA competences is further enhanced with possible training courses and specialist areas in which the standard elements can thematically be included. The paper states that the competence elements and training courses cross one another and overlap in a manifold way. The authors also propose a way which could verify into what extent the students have actually acquired taught IPMA competence elements. The paper contains the proposal of feedback quantification for the IPMA standard and project management teaching. The results of the paper can be used as a starting premise for future research. Both the verification proposal and the embedding of the elements into teaching are derived from on-going academic experience of the authors of the article.

Transfer coefficients for terrestrial foodchain: their derivation and limitations

International Nuclear Information System (INIS)

Ng, Y.C.; Colsher, C.S.; Thompson, S.E.

1979-01-01

Transfer coefficients to predict the passage of isotopes from the environment to terrestrial foods have been derived for various radionuclides of importance in the nuclear fuel cycle. These data update and extend previously recommended handbook values. We derive transfer coefficients to terrestrial foods and describe the systematics of the derived transfer coefficients. Suggestions are offered for changes in the values of transfer coefficients to terrestrial foods that now appear in federal regulatory guides. Deficiencies in our present knowledge concerning transfer coefficients and limitations in the use of these values to ensure compliance with radiation protection standards are discussed

Synthesis, α-glucosidase inhibition and molecular docking study of coumarin based derivatives.

Science.gov (United States)

Taha, Muhammad; Shah, Syed Adnan Ali; Afifi, Muhammad; Imran, Syahrul; Sultan, Sadia; Rahim, Fazal; Khan, Khalid Mohammed

2018-04-01

We have synthesized seventeen Coumarin based derivatives (1-17), characterized by 1 HNMR, 13 CNMR and EI-MS and evaluated for α-glucosidase inhibitory potential. Among the series, all derivatives exhibited outstanding α-glucosidase inhibition with IC 50 values ranging between 1.10 ± 0.01 and 36.46 ± 0.70 μM when compared with the standard inhibitor acarbose having IC 50 value 39.45 ± 0.10 μM. The most potent derivative among the series is derivative 3 having IC 50 value 1.10 ± 0.01 μM, which are many folds better than the standard acarbose. The structure activity relationship (SAR) was mainly based upon by bring about difference of substituent's on phenyl part. Molecular docking studies were carried out to understand the binding interaction of the most active compounds. Copyright © 2018 Elsevier Inc. All rights reserved.

Anticipatory Standards and the Commercialization of Nanotechnology

International Nuclear Information System (INIS)

Rashba, Edward; Gamota, Daniel

2003-01-01

Standardization will play an increasing role in creating a smooth transition from the laboratory to the marketplace as products based on nanotechnology are developed and move into broad use. Traditionally, standards have evolved out of a need to achieve interoperability among existing products, create order in markets, simplify production and ensure safety. This view does not account for the escalating trend in standardization, especially in emerging technology sectors, in which standards working groups anticipate the evolution of a technology and facilitate its rapid development and entree to the market place. It is important that the nanotechnology community views standards as a vital tool to promote progress along the nanotechnology value chain - from nanoscale materials that form the building blocks for components and devices to the integration of these devices into functional systems.This paper describes the need for and benefits derived from developing consensus standards in nanotechnology, and how standards are created. Anticipatory standards can nurture the growth of nanotechnology by drawing on the lessons learned from a standards effort that has and continues to revolutionize the telecommunications industry. Also, a brief review is presented on current efforts in the US to create nanotechnology standards

Standard molar enthalpies of formation of 2-, 3-, and 4-piperidinomethanol isomers

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Cabral, Joana I.T.A.

2006-01-01

The standard (p o =0.1MPa) molar energies of combustion in oxygen of 2-piperidinemethanol, 3-piperidinemethanol, and 4-piperidinemethanol, all in the crystalline phase, were measured, at T=298.15K, by static bomb calorimetry. These values were used to derive the standard molar enthalpies of combustion and the standard molar enthalpies of formation, in the condensed phase, for these compounds. Further, the standard molar enthalpies of sublimation, at T=298.15K, of these three piperidinomethanol isomers were determined by Cavet microcalorimetry. The combustion calorimetry results together with those from the Calvet microcalorimetry, were used to derive the standard molar enthalpies of formation, at T=298.15K, in the gaseous phase, of the three piperidinemethanol studied. -Δ c H m o (cr)Δ cr g H m o kJ.mol -1 kJ.mol -1 2-Piperidinemethanol3890.70+/-0.9293.02+/-0.503- Piperidinemethanol3895.3+/-1.195.9+/-1.44-Piperidinemethanol3891.3+/- 1.198.31+/-0.69

Asymptotic aspect of derivations in Banach algebras

Directory of Open Access Journals (Sweden)

Jaiok Roh

2017-02-01

Full Text Available Abstract We prove that every approximate linear left derivation on a semisimple Banach algebra is continuous. Also, we consider linear derivations on Banach algebras and we first study the conditions for a linear derivation on a Banach algebra. Then we examine the functional inequalities related to a linear derivation and their stability. We finally take central linear derivations with radical ranges on semiprime Banach algebras and a continuous linear generalized left derivation on a semisimple Banach algebra.

A generalized Collins formula derived by virtue of the displacement-squeezing related squeezed coherent state representation

International Nuclear Information System (INIS)

Chuan-Mei, Xie; Shao-Long, Wan; Hong-Yi, Fan

2010-01-01

Based on the displacement-squeezing related squeezed coherent state representation |z) g and using the technique of integration within an ordered product of operators, this paper finds a generalized Fresnel operator, whose matrix element in the coordinate representation leads to a generalized Collins formula (Huygens–Fresnel integration transformation describing optical diffraction). The generalized Fresnel operator is derived by a quantum mechanical mapping from z to sz - rz * in the |z) g representation, while |z) g in phase space is graphically denoted by an ellipse. (classical areas of phenomenology)

Radiological protection standards in the United Kingdom

International Nuclear Information System (INIS)

Pochin, E.; McLean, A.S.; Richings, L.D.G.

1976-09-01

In view of the interest now being expressed in the means by which radiological protection standards are derived and applied, this report briefly outlines the roles of the international organisations involved, summarises the UK arrangements, and indicates the principal sources of relevant biological information. (author)

Brain-Derived Neurotrophic Factor in Patients with Primary Open-Angle Glaucoma and Age-related Cataract.

Science.gov (United States)

Shpak, Alexander A; Guekht, Alla B; Druzhkova, Tatiana A; Kozlova, Ksenia I; Gulyaeva, Natalia V

2018-02-01

To study brain-derived neurotrophic factor (BDNF) content in aqueous humor (AH), lacrimal fluid (LF), and blood serum (BS) in patients with age-related cataract and primary open-angle glaucoma (POAG). BDNF was studied in 57 patients with age-related cataract, 55 patients with POAG combined with cataract, and 29 healthy controls (one eye in each person). AH was sampled during cataract surgery. The levels of BDNF in LF and BS did not differ in cataract patients and controls. The concentration of BDNF (pg/mL) in patients with POAG and cataract was lower than in cataract patients in AH (35.2 ± 14.2 vs. 54.6 ± 29.6, P early POAG and relatively increased in the next stages of the disease, inversely correlating with visual field index (Pearson's correlation coefficient r = -0.404, P = 0.002) and average retinal nerve fiber layer thickness (r = -0.322, P = 0.018). BDNF contents in LF and BS were also the lowest in early POAG. BDNF in AH strongly correlated with its content in LF (r = 0.66, P early POAG and relative increase in the next stages of the disease. A strong correlation exists between BDNF contents in AH and LF.

Simultaneous inference for model averaging of derived parameters

DEFF Research Database (Denmark)

Jensen, Signe Marie; Ritz, Christian

2015-01-01

Model averaging is a useful approach for capturing uncertainty due to model selection. Currently, this uncertainty is often quantified by means of approximations that do not easily extend to simultaneous inference. Moreover, in practice there is a need for both model averaging and simultaneous...... inference for derived parameters calculated in an after-fitting step. We propose a method for obtaining asymptotically correct standard errors for one or several model-averaged estimates of derived parameters and for obtaining simultaneous confidence intervals that asymptotically control the family...

TECHNICAL DESIGN NOTE: Digital proportional-integral-derivative velocity controller of a Mössbauer spectrometer

Science.gov (United States)

Pechousek, J.; Prochazka, R.; Mashlan, M.; Jancik, D.; Frydrych, J.

2009-01-01

The digital proportional-integral-derivative (PID) velocity controller used in the Mössbauer spectrometer implemented in field programmable gate array (FPGA) is based on the National Instruments CompactRIO embedded system and LabVIEW graphical programming tools. The system works as a remote system accessible via the Ethernet. The digital controller operates in real-time conditions, and the maximum sampling frequency is approximately 227 kS s-1. The system was tested with standard sample measurements of α-Fe and α-57Fe2O3 on two different electromechanical velocity transducers. The nonlinearities of the velocity scales in the relative form are better than 0.2%. The replacement of the standard analog PID controller by the new system brings the possibility of optimizing the control process more precisely.

Key cytokines of adaptive immunity are differentially induced in rainbow trout kidney by a group of structurally related geranyl aromatic derivatives.

Science.gov (United States)

Valenzuela, Beatriz; Obreque, Javiera; Soto-Aguilera, Sarita; Maisey, Kevin; Imarai, Mónica; Modak, Brenda

2016-02-01

Filifolinone is a semi-synthetic terpenoid derivative obtained from Heliotropium filifolium that increases the expression level of pro-inflammatory and anti-inflammatory cytokines in kidney cells of salmon. Because cytokines are produced in response to a foreign organism and by distinct other signals modulating immune responses, we further studied the potential immunomodulatory effects of a group of structural related terpenoid derivatives from H. filifolium on salmonids to determine the relationship between the chemical structure of the derivatives and their ability to modify cytokine expression and the lymphoid content. The resin and four 3H-spiro 1-benzofuran-2,1'-cyclohexane derivatives were tested in vivo in rainbow trout (Oncorhynchus mykiss) by quantifying the transcript levels of antiviral and T helper-type cytokines and T and B cells in the kidney. Three of the four terpenoids differ only in the C-7'substituent of the cyclohexane and the presence of the ketone group at this position in Filifolinone appeared responsible of an important up-regulation of IFN-α1, IFN-γ, IL-4/13A and IL-17D in the kidney of the treated trout. In addition, the absence of a methoxy group in carbon 7 of the benzene ring, found in all compounds but not in Folifolinoic acid, produced a significant reduction of IFN-γ, IL-12 and IL-4/13A transcripts. B cells were not affected by the compound treatment but Filifolinoic acid and the resin induced a significant reduction of T cells. Altogether, results showed that immunomodulating responses observed in the trout by effect of 3H-spiro 1-benzofuran-2,1'-cyclohexane derivatives is related to the presence of the ketone group in the carbon 7' and the methoxy group in carbon 7 of the benzene ring, being Filifolinone the most active immunostimulatory compound identified. Copyright © 2015 Elsevier Ltd. All rights reserved.

STANDARD STARS AND EMPIRICAL CALIBRATIONS FOR Hα AND Hβ PHOTOMETRY

International Nuclear Information System (INIS)

Joner, Michael D.; Hintz, Eric G.

2015-01-01

We define an Hα photometric system that is designed as a companion to the well established Hβ index. The new system is built on spectrophotometric observations of field stars as well as stars in benchmark open clusters. We present data for 75 field stars, 12 stars from the Coma star cluster, 24 stars from the Hyades, 17 stars from the Pleiades, and 8 stars from NGC 752 to be used as primary standard stars in the new systems. We show that the system transformations are relatively insensitive to the shape of the filter functions. We make comparisons of the Hα index to the Hβ index and illustrate the relationship between the two systems. In addition, we present relations that relate both hydrogen indices to equivalent width and effective temperature. We derive equations to calibrate both systems for Main Sequence stars with spectral types in the range O9 to K2 for equivalent width and A2 to K2 for effective temperature

STANDARD STARS AND EMPIRICAL CALIBRATIONS FOR Hα AND Hβ PHOTOMETRY

Energy Technology Data Exchange (ETDEWEB)

Joner, Michael D.; Hintz, Eric G., E-mail: joner@byu.edu, E-mail: hintz@byu.edu [Department of Physics and Astronomy, Brigham Young University, N283 ESC, Provo, UT 84602 (United States)

2015-12-15

We define an Hα photometric system that is designed as a companion to the well established Hβ index. The new system is built on spectrophotometric observations of field stars as well as stars in benchmark open clusters. We present data for 75 field stars, 12 stars from the Coma star cluster, 24 stars from the Hyades, 17 stars from the Pleiades, and 8 stars from NGC 752 to be used as primary standard stars in the new systems. We show that the system transformations are relatively insensitive to the shape of the filter functions. We make comparisons of the Hα index to the Hβ index and illustrate the relationship between the two systems. In addition, we present relations that relate both hydrogen indices to equivalent width and effective temperature. We derive equations to calibrate both systems for Main Sequence stars with spectral types in the range O9 to K2 for equivalent width and A2 to K2 for effective temperature.

76 FR 60357 - Federal Regulations; OMB Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards...

Science.gov (United States)

2011-09-29

... derived from 41 U.S.C. 1501. Cost Accounting Standards are rules governing the measurement, assignment... Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards Included in the Semiannual Agenda of..., and Cost Accounting Standards Board (CASB) Cost Accounting Standards. OMB Circulars and OFPP Policy...

On left (θ,ϕ-derivations in BCI-algebras

Directory of Open Access Journals (Sweden)

G. Muhiuddin

2014-07-01

Full Text Available The notion of (regular left (θ,ϕ-derivations of a BCI-algebra is introduced, some useful examples are discussed, and related properties are investigated. Conditions for a left (θ,ϕ-derivation to be regular are provided. The concepts of a d(θ,ϕ-invariant left (θ,ϕ-derivation and θ-ideal are introduced, and their relations are discussed. Furthermore, some more interesting results are established.

Impact of model uncertainty on soil quality standards for cadmium in rice paddy fields

Energy Technology Data Exchange (ETDEWEB)

Roemkens, P.F.A.M., E-mail: paul.romkens@wur.nl [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Brus, D.J. [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Guo, H.Y.; Chu, C.L.; Chiang, C.M. [Taiwan Agricultural Research Institute (TARI), Wufong, Taiwan (China); Koopmans, G.F. [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Department of Soil Quality, Wageningen University, WageningenUR. P.O. Box 47, 6700AA, Wageningen (Netherlands)

2011-08-01

At present, soil quality standards used for agriculture do not consider the influence of pH and CEC on the uptake of pollutants by crops. A database with 750 selected paired samples of cadmium (Cd) in soil and paddy rice was used to calibrate soil to plant transfer models using the soil metal content, pH, and CEC or soil Cd and Zn extracted by 0.01 M CaCl{sub 2} as explanatory variables. The models were validated against a set of 2300 data points not used in the calibration. These models were then used inversely to derive soil quality standards for Japonica and Indica rice cultivars based on the food quality standards for rice. To account for model uncertainty, strict soil quality standards were derived considering a maximum probability that rice exceeds the food quality standard equal to 10 or 5%. Model derived soil standards based on Aqua Regia ranged from less than 0.3 mg kg{sup -1} for Indica at pH 4.5 to more than 6 mg kg{sup -1} for Japonica-type cultivars in clay soils at pH 7. Based on the CaCl{sub 2} extract, standards ranged from 0.03 mg kg{sup -1} Cd for Indica cultivars to 0.1 mg kg{sup -1} Cd for Japonica cultivars. For both Japonica and Indica-type cultivars, the soil quality standards must be reduced by a factor of 2 to 3 to obtain the strict standards. The strong impact of pH and CEC on soil quality standards implies that it is essential to correct for soil type when deriving national or local standards. Validation on the remaining 2300 samples indicated that both types of models were able to accurately predict (> 92%) whether rice grown on a specific soil will meet the food quality standard used in Taiwan. - Research highlights: {yields} Cadmium uptake by Japonica and Indica rice varieties depends on soil pH and CEC. {yields} Food safety based soil standards range from 0.3 (Indica) to 6 mg kg{sup -1} (Japonica). {yields} Model uncertainty leads to strict soil standards of less than 0.1 mg kg{sup -1} for Indica. {yields} Soil pH and CEC should be

Students as Non-Standard Employees. Exploring Work Related Issues in Students’ Perceptions on their Term-time Job

DEFF Research Database (Denmark)

Winkler, Ingo

2008-01-01

The article presents the results of an explorative study that aimed at exploring work related issues in students’ perceptions of their job as atypical employees. An individual picture of the experienced work reality of students is drawn according to work task, flexible working hours, instructions...... and training opportunities, students’ relations to other employees, and social integration. By adopting a qualitative design, I was able to emphasize the subjective perspective of students describing their very own experiences as flexible workers. The study revealed various perceptions of students working...... as flexible employees and related this picture to current empirical and theoretical research in the field of non-standard employment....

Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

Science.gov (United States)

Lenhart, Gaby

2016-04-01

In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form

Analysis of a gamma-ray spectrum by using a standard spectrum

International Nuclear Information System (INIS)

Tasaka, Kanji

1975-06-01

The standard spectrum method has been extended to take into account the energy dependence of a standard spectrum. The method analyses the observed gamma-ray spectrum by the least-square method, using an interpolated standard spectrum for expressing the line shape and a linear function for the background continuum. The interpolated standard spectrum is defined for each fitting interval by interpolating several standard spectra, which are derived directly from the observed spectra of single photopeaks each corresponding to the incident monochromatic gamma-rays by subtracting the background and smoothing the data. (author)

A general theory of quantum relativity

International Nuclear Information System (INIS)

Minic, Djordje; Tze, C.-H.

2004-01-01

The geometric form of standard quantum mechanics is compatible with the two postulates: (1) the laws of physics are invariant under the choice of experimental setup and (2) every quantum observation or event is intrinsically statistical. These postulates remain compatible within a background independent extension of quantum theory with a local intrinsic time implying the relativity of the concept of a quantum event. In this extension the space of quantum events becomes dynamical and only individual quantum events make sense observationally. At the core of such a general theory of quantum relativity is the three-way interplay between the symplectic form, the dynamical metric and non-integrable almost complex structure of the space of quantum events. Such a formulation provides a missing conceptual ingredient in the search for a background independent quantum theory of gravity and matter. The crucial new technical element in our scheme derives from a set of recent mathematical results on certain infinite-dimensional almost Kahler manifolds which replace the complex projective spaces of standard quantum mechanics

40 CFR 60.42b - Standard for sulfur dioxide (SO2).

Science.gov (United States)

2010-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Industrial... February 28, 2005, that combusts coal or oil shall cause to be discharged into the atmosphere any gases... from the combustion of natural gas, wood, municipal-type solid waste, or other fuels or heat derived...

Standard Procedure for Grid Interaction Analysis

International Nuclear Information System (INIS)

Svensson, Bertil; Lindahl, Sture; Karlsson, Daniel; Joensson, Jonas; Heyman, Fredrik

2015-01-01

Grid events, simultaneously affecting all safety related auxiliary systems in a nuclear power plant, are critical and must be carefully addressed in the design, upgrading and operational processes. Up to now, the connecting grid has often been treated as either fully available or totally unavailable, and too little attention has been paid to specify the grid performance criteria. This paper deals with standard procedures for grid interaction analysis, to derive tools and criteria to handle grid events challenging the safety systems of the plant. Critical external power system events are investigated and characterised, with respect to severity and rate of occurrence. These critical events are then grouped with respect to impact on the safety systems, when a disturbance propagates into the plant. It is then important to make sure that 1) the impact of the disturbance will never reach any critical system, 2) the impact of the disturbance will be eliminated before it will hurt any critical system, or 3) the critical systems will be proven to be designed in such a way that they can withstand the impact of the disturbance, and the associated control and protection systems can withstand voltage and frequency transients associated with the disturbances. A number of representative disturbance profiles, reflecting connecting grid conditions, are therefore derived, to be used for equipment testing. (authors)

Application of Metabolomics to Quality Control of Natural Product Derived Medicines.

Science.gov (United States)

Lee, Kyung-Min; Jeon, Jun-Yeong; Lee, Byeong-Ju; Lee, Hwanhui; Choi, Hyung-Kyoon

2017-11-01

Metabolomics has been used as a powerful tool for the analysis and quality assessment of the natural product (NP)-derived medicines. It is increasingly being used in the quality control and standardization of NP-derived medicines because they are composed of hundreds of natural compounds. The most common techniques that are used in metabolomics consist of NMR, GC-MS, and LC-MS in combination with multivariate statistical analyses including principal components analysis (PCA) and partial least squares-discriminant analysis (PLS-DA). Currently, the quality control of the NP-derived medicines is usually conducted using HPLC and is specified by one or two indicators. To create a superior quality control framework and avoid adulterated drugs, it is necessary to be able to determine and establish standards based on multiple ingredients using metabolic profiling and fingerprinting. Therefore, the application of various analytical tools in the quality control of NP-derived medicines forms the major part of this review. Veregen ® (Medigene AG, Planegg/Martinsried, Germany), which is the first botanical prescription drug approved by US Food and Drug Administration, is reviewed as an example that will hopefully provide future directions and perspectives on metabolomics technologies available for the quality control of NP-derived medicines.

Working out the standards for nuclear power aging management implementation (PLM Standards)

International Nuclear Information System (INIS)

Miyano, Hiroshi

2008-01-01

Background of preparation of standards, preparation of standards for development of nuclear power aging management technologies, revision of PLM (Product Lifecycle Management) standards, and problems of PLM standards are stated. The placement of social needs, scheme, the standards system, preparation of rules and standards, and practical use of them by road map are illustrated and explained. Relation between the safety regulations and examination standards, and development and preparation of standards system are outlined. The nuclear power plant aging management and the maintenance control are provided by many rules and standards. PLM standards defines the aging phenomena and extracts the measurements and reflects them on the usual maintenance flow under the long term maintenance program. New examination system constructs the usual maintenance and the maintenance based on the aging management and long term maintenance program. Outline and construction of PLM standards are explained with notes and additional books. (S.Y.)

Breather management in the derivative nonlinear Schrödinger equation with variable coefficients

Energy Technology Data Exchange (ETDEWEB)

Zhong, Wei-Ping, E-mail: zhongwp6@126.com [Department of Electronic and Information Engineering, Shunde Polytechnic, Guangdong Province, Shunde 528300 (China); Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar); Belić, Milivoj [Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar); Malomed, Boris A. [Department of Physical Electronics, School of Electrical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978 (Israel); Huang, Tingwen [Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar)

2015-04-15

We investigate breather solutions of the generalized derivative nonlinear Schrödinger (DNLS) equation with variable coefficients, which is used in the description of femtosecond optical pulses in inhomogeneous media. The solutions are constructed by means of the similarity transformation, which reduces a particular form of the generalized DNLS equation into the standard one, with constant coefficients. Examples of bright and dark breathers of different orders, that ride on finite backgrounds and may be related to rogue waves, are presented. - Highlights: • Exact solutions of a generalized derivative NLS equation are obtained. • The solutions are produced by means of a transformation to the usual integrable equation. • The validity of the solutions is verified by comparing them to numerical counterparts. • Stability of the solutions is checked by means of direct simulations. • The model applies to the propagation of ultrashort pulses in optical media.

A method to implement fine-grained access control for personal health records through standard relational database queries.

Science.gov (United States)

Sujansky, Walter V; Faus, Sam A; Stone, Ethan; Brennan, Patricia Flatley

2010-10-01

Online personal health records (PHRs) enable patients to access, manage, and share certain of their own health information electronically. This capability creates the need for precise access-controls mechanisms that restrict the sharing of data to that intended by the patient. The authors describe the design and implementation of an access-control mechanism for PHR repositories that is modeled on the eXtensible Access Control Markup Language (XACML) standard, but intended to reduce the cognitive and computational complexity of XACML. The authors implemented the mechanism entirely in a relational database system using ANSI-standard SQL statements. Based on a set of access-control rules encoded as relational table rows, the mechanism determines via a single SQL query whether a user who accesses patient data from a specific application is authorized to perform a requested operation on a specified data object. Testing of this query on a moderately large database has demonstrated execution times consistently below 100ms. The authors include the details of the implementation, including algorithms, examples, and a test database as Supplementary materials. Copyright © 2010 Elsevier Inc. All rights reserved.

Mothers’ non-standard working and childcare-related challenges : A comparison between lone and coupled mothers

OpenAIRE

Moilanen, Sanna; May, Vanessa; Räikkönen, Eija; Sevón, Eija; Laakso, Marja-Leena

2016-01-01

Purpose – The purpose of this paper is to particularly focus on lone-mother families, comparing the childcare-related challenges experienced by working lone mothers and coupled mothers in three European countries in the context of a 24/7 economy and non-standard working hours (e.g. evening, night and weekend work). Design/methodology/approach – This study utilises survey data from Finnish, Dutch and British working mothers (n=1,106) collected as part of the “Families 24/7” research ...

INTEGRATION OF IMAGE-DERIVED AND POS-DERIVED FEATURES FOR IMAGE BLUR DETECTION

Directory of Open Access Journals (Sweden)

T.-A. Teo

2016-06-01

Full Text Available The image quality plays an important role for Unmanned Aerial Vehicle (UAV’s applications. The small fixed wings UAV is suffering from the image blur due to the crosswind and the turbulence. Position and Orientation System (POS, which provides the position and orientation information, is installed onto an UAV to enable acquisition of UAV trajectory. It can be used to calculate the positional and angular velocities when the camera shutter is open. This study proposes a POS-assisted method to detect the blur image. The major steps include feature extraction, blur image detection and verification. In feature extraction, this study extracts different features from images and POS. The image-derived features include mean and standard deviation of image gradient. For POS-derived features, we modify the traditional degree-of-linear-blur (blinear method to degree-of-motion-blur (bmotion based on the collinear condition equations and POS parameters. Besides, POS parameters such as positional and angular velocities are also adopted as POS-derived features. In blur detection, this study uses Support Vector Machines (SVM classifier and extracted features (i.e. image information, POS data, blinear and bmotion to separate blur and sharp UAV images. The experiment utilizes SenseFly eBee UAV system. The number of image is 129. In blur image detection, we use the proposed degree-of-motion-blur and other image features to classify the blur image and sharp images. The classification result shows that the overall accuracy using image features is only 56%. The integration of image-derived and POS-derived features have improved the overall accuracy from 56% to 76% in blur detection. Besides, this study indicates that the performance of the proposed degree-of-motion-blur is better than the traditional degree-of-linear-blur.

Fundamental Data Standards for Science Data System Interoperability and Data Correlation

Science.gov (United States)

Hughes, J. Steven; Gopala Krishna, Barla; Rye, Elizabeth; Crichton, Daniel

The advent of the Web and languages such as XML have brought an explosion of online science data repositories and the promises of correlated data and interoperable systems. However there have been relatively few successes in meeting the expectations of science users in the internet age. For example a Google-like search for images of Mars will return many highly-derived and appropriately tagged images but largely ignore the majority of images in most online image repositories. Once retrieved, users are further frustrated by poor data descriptions, arcane formats, and badly organized ancillary information. A wealth of research indicates that shared information models are needed to enable system interoperability and data correlation. However, at a more fundamental level, data correlation and system interoperability are dependant on a relatively few shared data standards. A com-mon data dictionary standard, for example, allows the controlled vocabulary used in a science repository to be shared with potential collaborators. Common data registry and product iden-tification standards enable systems to efficiently find, locate, and retrieve data products and their metadata from remote repositories. Information content standards define categories of descriptive data that help make the data products scientifically useful to users who were not part of the original team that produced the data. The Planetary Data System (PDS) has a plan to move the PDS to a fully online, federated system. This plan addresses new demands on the system including increasing data volume, numbers of missions, and complexity of missions. A key component of this plan is the upgrade of the PDS Data Standards. The adoption of the core PDS data standards by the International Planetary Data Alliance (IPDA) adds the element of international cooperation to the plan. This presentation will provide an overview of the fundamental data standards being adopted by the PDS that transcend science domains and that

On higher derivative gravity

International Nuclear Information System (INIS)

Accioly, A.J.

1987-01-01

A possible classical route conducting towards a general relativity theory with higher-derivatives starting, in a sense, from first principles, is analysed. A completely causal vacuum solution with the symmetries of the Goedel universe is obtained in the framework of this higher-derivative gravity. This very peculiar and rare result is the first known vcuum solution of the fourth-order gravity theory that is not a solution of the corresponding Einstein's equations.(Author) [pt

Standards and quality

CERN Document Server

El-Tawil, Anwar

2015-01-01

The book brings together a number of subjects of prime importance for any practicing engineer and, students of engineering. The book explains the concepts and functions of voluntary standards, mandatory technical regulations, conformity assessment (testing and measurement of products), certification, quality and quality management systems as well as other management systems such as environmental, social responsibility and food safety management systems.The book also gives a comprehensive description of the role of metrology systems that underpin conformity assessment. A description is given of typical national systems of standards, quality and metrology and how they relate directly or through regional structures to international systems. The book also covers the relation between standards and trade and explains the context and stipulations of the Technical Barriers to Trade Agreement of the World Trade Organization (WTO).

Squark and slepton mass relations in grand unified theories

International Nuclear Information System (INIS)

Cheng, H.; Hall, L.J.

1995-01-01

In the minimal supersymmetric standard model, assuming universal scalar masses at large energies, there are four intragenerational relations between the masses of the squarks and sleptons for each light generation. In this paper we study the scalar mass relations which follow only from the assumption that at large energies there is a grand unified theory which leads to a significant prediction of the weak mixing angle. Two new intragenerational mass relations for each of the light generations are derived. In addition, a third mass relation is found which relates the Higgs boson masses, the masses of the third generation scalars, and the masses of the scalars of the lighter generations. Verification of a fourth mass relation, involving only the charged slepton masses, provides a signal for SO(10) unification

Synthesis and evaluation of 18f-labeled benzylideneaniline derivatives as new biomarkers for β-amyloid imaging in Alzheimer's disease

International Nuclear Information System (INIS)

B, Rai Ganeaha; Jeong, Jae Min; Lee, Yun Sang; Chang, Young Soo; Kim, Young Ju; Kim, Hyung Woo; Lee, Dong Soo; Chung, June Key; Lee, Myung Chul

2005-01-01

Noninvasive early detection of the Aβ plaques in Alzheimer's disease (AD) brain may be useful tool for the treatment of AD patients. We herein describe the synthesis of 18 F-labeled benzylideneaniline derivatives utilizing a novel labeling approach for imaging Aβ plaques in AD patients. Condensation of [ 18 F] 4-fluorobenzaldehyde with various aromatic amines afforded 18 F-labeled benzylideneaniline derivatives. The biodistribution of 18F-Iabeled benzylideneaniline derivatives was studied with ICR male mice. The binding affinities of the cold compounds to Aβ (1-40) were determined using [ 125 I] 2-(3'-iodo-4-methylaminophenyl) benzothiazole as a reference standard. The radiochemical yields were 32-44% and radiochemical purities were above 99% after purification. Log P values of the compounds were 1.56-1.58. Some of the benzylideneaniline derivatives showed relatively high binding affinity to Aβ (1-40) aggregates (Ki 149-304 nM). The 18 F-labeled benzylideneaniline derivatives displayed high brain uptake ratio in normal mice (2.9-24.93). The study suggests that these 18 F-labeled compounds may be suitable for Aβ plaque imaging in AD patients

Defining Indicators and Standards for Tourism Impacts in Protected Areas: Cape Range National Park, Australia

Science.gov (United States)

Moore, Susan A.; Polley, Amanda

2007-03-01

Visitors’ perceptions of impacts and acceptable standards for environmental conditions can provide essential information for the sustainable management of tourist destinations, especially protected areas. To this end, visitor surveys were administered during the peak visitor season in Cape Range National Park, on the northwest coast of Western Australia and adjacent to the iconic Ningaloo Reef. The central focus was visitors’ perceptions regarding environmental conditions and standards for potential indicators. Conditions considered of greatest importance in determining visitors’ quality of experience included litter, inadequate disposal of human waste, presence of wildlife, levels of noise, and access to beach and ocean. Standards were determined, based on visitors’ perceptions, for a range of site-specific and non-site-specific indicators, with standards for facilities (e.g., acceptable number of parking bays, signs) and for negative environmental impacts (e.g., levels of littering, erosion) sought. The proposed standards varied significantly between sites for the facilities indicators; however, there was no significant difference between sites for environmental impacts. For the facilities, the standards proposed by visitors were closely related to the existing situation, suggesting that they were satisfied with the status quo. These results are considered in the context of current research interest in the efficacy of visitor-derived standards as a basis for protected area management.

Defining indicators and standards for tourism impacts in protected areas: Cape Range National Park, Australia.

Science.gov (United States)

Moore, Susan A; Polley, Amanda

2007-03-01

Visitors' perceptions of impacts and acceptable standards for environmental conditions can provide essential information for the sustainable management of tourist destinations, especially protected areas. To this end, visitor surveys were administered during the peak visitor season in Cape Range National Park, on the northwest coast of Western Australia and adjacent to the iconic Ningaloo Reef. The central focus was visitors' perceptions regarding environmental conditions and standards for potential indicators. Conditions considered of greatest importance in determining visitors' quality of experience included litter, inadequate disposal of human waste, presence of wildlife, levels of noise, and access to beach and ocean. Standards were determined, based on visitors' perceptions, for a range of site-specific and non-site-specific indicators, with standards for facilities (e.g., acceptable number of parking bays, signs) and for negative environmental impacts (e.g., levels of littering, erosion) sought. The proposed standards varied significantly between sites for the facilities indicators; however, there was no significant difference between sites for environmental impacts. For the facilities, the standards proposed by visitors were closely related to the existing situation, suggesting that they were satisfied with the status quo. These results are considered in the context of current research interest in the efficacy of visitor-derived standards as a basis for protected area management.

Assessment of MODIS-derived indices (2001-2013) to drought across Taiwan's forests

Science.gov (United States)

Chang, Chung-Te; Wang, Hsueh-Ching; Huang, Cho-ying

2017-12-01

Tropical and subtropical ecosystems, the largest terrestrial carbon pools, are very susceptible to the variability of seasonal precipitation. However, the assessment of drought conditions in these regions is often overlooked due to the preconceived notion of the presence of high humidity. Drought indices derived from remotely sensed imagery have been commonly used for large-scale monitoring, but feasibility of drought assessment may vary across regions due to climate regimes and local biophysical conditions. Therefore, this study aims to evaluate the feasibility of 11 commonly used MODIS-derived vegetation/drought index in the forest regions of Taiwan through comparison with the station-based standardized precipitation index with a 3-month time scale (SPI3). The drought indices were further transformed (standardized anomaly, SA) to make them better delineate the spatiotemporal variations of drought conditions. The results showed that the Normalized Difference Infrared Index utilizing the near-infrared and shortwave infrared bands (NDII6) may be more superior to other indices in delineating drought patterns. Overall, the NDII6 SA-SPI3 pair yielded the highest correlation (mean r ± standard deviation = 0.31 ± 0.13) and was most significant in central and south Taiwan (r = 0.50-0.90) during the cold, dry season (January and April). This study illustrated that the NDII6 is suitable to delineate drought conditions in a relatively humid region. The results suggested the better performance of the NDII6 SA-SPI3 across the high climate gradient, especially in the regions with dramatic interannual amplifications of rainfall. This synthesis was conducted across a wide bioclimatic gradient, and the findings could be further generalized to a much broader geographical extent.

The differentiation potential of adipose tissue-derived mesenchymal stem cells into cell lineage related to male germ cells

Directory of Open Access Journals (Sweden)

P. Bräunig

Full Text Available ABSTRACT The adipose tissue is a reliable source of Mesenchymal stem cells (MSCs showing a higher plasticity and transdifferentiation potential into multilineage cells. In the present study, adipose tissue-derived mesenchymal stem cells (AT-MSCs were isolated from mice omentum and epididymis fat depots. The AT-MSCs were initially compared based on stem cell surface markers and on the mesodermal trilineage differentiation potential. Additionally, AT-MSCs, from both sources, were cultured with differentiation media containing retinoic acid (RA and/or testicular cell-conditioned medium (TCC. The AT-MSCs expressed mesenchymal surface markers and differentiated into adipogenic, chondrogenic and osteogenic lineages. Only omentum-derived AT-MSCs expressed one important gene marker related to male germ cell lineages, after the differentiation treatment with RA. These findings reaffirm the importance of adipose tissue as a source of multipotent stromal-stem cells, as well as, MSCs source regarding differentiation purpose.

An Approach to Regulation on Financial Derivatives in the Spanish Law

Directory of Open Access Journals (Sweden)

Pablo Sanz Bayón

2013-07-01

Full Text Available This review examines the major reforms implemented in the regulations governing the trading of financial derivatives in Spain. This new regulation is intended to harmonize the treatment of derivative products with the legal standards of international markets in the European area as well as improving their competitiveness by enhancing the trading of new products and business lines in the Spanish markets while reducing the systemic risk associated to the clearing and settlement of derivatives contracts. Including measures regarding the conversion of OTC derivatives into assets quoted on organized markets into Spanish law has made an important contribution to a better regulation, security and transparency of the financial system.

A review of standards related to biomass combustion

Energy Technology Data Exchange (ETDEWEB)

Villeneuve, J.; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

2010-07-01

Air quality is evaluated by the concentration of particulate matter (PM) per unit of air volume. PM10 refers to all particles smaller than 10 micrometers in diameter. The European Commission has established acceptable levels of PM10, but the rules are less precise for evaluating the amount of PM that can be emitted from a furnace's chimney. The province of Quebec allows up to 340 mg/m{sup 3} of PM for large furnaces and 600 mg/m{sup 3} for smaller furnaces. Although wood products can be burned in the province, the burning of all other biomass such as straw, stover and grass is forbidden. The City of Vancouver has stricter emissions standards for PM, notably 50 mg/m{sup 3} for large furnaces and 35 mg/m{sup 3} for smaller furnaces. The reason for this difference is that most furnaces in Quebec are used in rural areas whereas the densely populated City of Vancouver must control emissions at the source. It was concluded that although a universal standard on combustion emissions is not feasible because of different socio-economic conditions and population density, furnaces should emit levels of PM which decrease as the surrounding area population concentration increases. Stringent regulations may be met through advances in technology such as chimney height, bag filters, multicyclones, and precipitators.

Standard molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Amaral, Luisa M.P.F.; Boaventura, Cristina R.P.; Gomes, Jose R.B.

2008-01-01

The standard (p 0 = 0.1 MPa) molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids were derived from their standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of 2- and 3-cyanobenzoic acids. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and standard molar enthalpies for phase transition. The results obtained are -(150.7 ± 2.0) kJ . mol -1 , -(153.6 ± 1.7) kJ . mol -1 and -(157.1 ± 1.4) kJ . mol -1 for 2-cyano, 3-cyano and 4-cyanobenzoic acids, respectively. Standard molar enthalpies of formation were also estimated by employing two different methodologies: one based on the Cox scheme and the other one based on several different computational approaches. The calculated values show a good agreement with the experimental values obtained in this work

Simple recursion relations for general field theories

International Nuclear Information System (INIS)

Cheung, Clifford; Shen, Chia-Hsien; Trnka, Jaroslav

2015-01-01

On-shell methods offer an alternative definition of quantum field theory at tree-level, replacing Feynman diagrams with recursion relations and interaction vertices with a handful of seed scattering amplitudes. In this paper we determine the simplest recursion relations needed to construct a general four-dimensional quantum field theory of massless particles. For this purpose we define a covering space of recursion relations which naturally generalizes all existing constructions, including those of BCFW and Risager. The validity of each recursion relation hinges on the large momentum behavior of an n-point scattering amplitude under an m-line momentum shift, which we determine solely from dimensional analysis, Lorentz invariance, and locality. We show that all amplitudes in a renormalizable theory are 5-line constructible. Amplitudes are 3-line constructible if an external particle carries spin or if the scalars in the theory carry equal charge under a global or gauge symmetry. Remarkably, this implies the 3-line constructibility of all gauge theories with fermions and complex scalars in arbitrary representations, all supersymmetric theories, and the standard model. Moreover, all amplitudes in non-renormalizable theories without derivative interactions are constructible; with derivative interactions, a subset of amplitudes is constructible. We illustrate our results with examples from both renormalizable and non-renormalizable theories. Our study demonstrates both the power and limitations of recursion relations as a self-contained formulation of quantum field theory.

Radioactivity standards for drinking water

International Nuclear Information System (INIS)

Sastry, V.N.; Mahadevan, T.N.; Nair, R.N.; Krishnamoorthy, T.M.; Nambi, K.S.V.

1995-01-01

The Bureau of Indian Standards (BIS) had issued drinking water specifications for radioactivity in 1991 as 0.1 Bq/L for gross α and 1 pCi/L for gross β. The specification for gross β should have been 1 Bq/L, however the basis for arriving at these standards were not clearly stated. The radiological basis for fixing the Drinking Water Standards (DWS) has, therefore, been reviewed in the present work. The values derived now for gross α (0.01 Bq/L) and gross β (0.34 Bq/L) are different from the values given above. In addition, the DWS for some important radionuclides using the ingestion dose factors applicable to members of the general public (adult as well as children) are given here. It is hoped that the presently suggested values will be accepted by the Atomic Energy Regulatory Board and adopted by the BIS in the near future. (author). 14 refs., 2 tabs., 2 ills

Prevention of Crime and the Optimal Standard of Proof in Criminal Law

DEFF Research Database (Denmark)

Lando, Henrik

2003-01-01

The standard of proof in criminal law a®ects retributive justice throughthe number of wrong convictions and wrong acquittals. It also a®ects thelevel of crime, since a higher standard of proof implies less deterrence andless incapacitation. This article derives an expression for the optimal...

The safety of donor skin preserved with glycerol - Evaluating the Euro Skin Bank preservation procedures of human donor skin against the prEN 12442 standard

NARCIS (Netherlands)

Geertsma RE; Wassenaar C; LGM

2000-01-01

The procedures for preservation of human donor skin with glycerol, as applied by the Euro Skin Bank (ESB), were evaluated against the prEN 12442 standard: animal tissues and their derivatives used in the manufacture of medical devices. The focus chosen for this review is on risks related to the

78 FR 49663 - Enhanced Risk Management Standards for Systemically Important Derivatives Clearing Organizations

Science.gov (United States)

2013-08-15

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Part 39 RIN 3038-AC98 Enhanced Risk Management...'') is adopting final regulations to implement enhanced risk management standards for systemically..., strengthen the risk management practices of DCOs, and increase overall confidence in the financial system by...

Comparison of ISO 9000 and recent software life cycle standards to nuclear regulatory review guidance

International Nuclear Information System (INIS)

Preckshot, G.G.; Scott, J.A.

1998-01-01

Lawrence Livermore National Laboratory is assisting the Nuclear Regulatory Commission with the assessment of certain quality and software life cycle standards to determine whether additional guidance for the U.S. nuclear regulatory context should be derived from the standards. This report describes the nature of the standards and compares the guidance of the standards to that of the recently updated Standard Review Plan

Another Look at the Method of Y-Standardization in Logit and Probit Models

DEFF Research Database (Denmark)

Karlson, Kristian Bernt

2015-01-01

This paper takes another look at the derivation of the method of Y-standardization used in sociological analysis involving comparisons of coefficients across logit or probit models. It shows that the method can be derived under less restrictive assumptions than hitherto suggested. Rather than...

Standard definitions of terms relating to dosimetry - approved standard 1973

International Nuclear Information System (INIS)

Anon.

1975-01-01

Definitions are presented for terms related to radiation dosimetry. These definitions are the same as, or similar to, those recommended by the International Commission on Radiological Units and Measurements (ICRU) as presented in the National Bureau of Sandards Handbook 62, but attempt has been made to define some of the terms more exactly

On algebraic time-derivative estimation and deadbeat state reconstruction

DEFF Research Database (Denmark)

Reger, Johann; Jouffroy, Jerome

2009-01-01

This paper places into perspective the so-called algebraic time-derivative estimation method recently introduced by Fliess and co-authors with standard results from linear statespace theory for control systems. In particular, it is shown that the algebraic method can essentially be seen...

18 CFR 367.2450 - Account 245, Derivative instrument liabilities-Hedges

Science.gov (United States)

2010-04-01

..., Derivative instrument liabilities—Hedges (a) This account must include the change in the fair value of... service company must record the change in the fair value of a derivative instrument liability related to a... change in the fair value of a derivative instrument liability related to a fair value hedge in this...

Renormalization group and relations between scattering amplitudes in a theory with different mass scales

International Nuclear Information System (INIS)

Gulov, A.V.; Skalozub, V.V.

2000-01-01

In the Yukawa model with two different mass scales the renormalization group equation is used to obtain relations between scattering amplitudes at low energies. Considering fermion-fermion scattering as an example, a basic one-loop renormalization group relation is derived which gives possibility to reduce the problem to the scattering of light particles on the external field substituting a heavy virtual state. Applications of the results to problem of searching new physics beyond the Standard Model are discussed [ru

5-Nitroimidazole Derivatives and their Antimicrobial Activity

International Nuclear Information System (INIS)

Khan, K.M.; Salar, U.; Yousuf, S.; Naz, F.

2016-01-01

5-Nitroimidazole derivatives 2-8 were synthesized from secnidazole. The syntheses were accomplished in two steps which start from the oxidation of secnidazole to the secnidazolone 1. Secnidazolone 1 was converted into its hydrazone derivative 2-8 by treating with different substituted acid hydrazide. Compounds 2-8 were evaluated for their antimicrobial activity against Gram-positive and Gram-negative bacteria, compounds 3 and 4 showed the significant activity against Staphylococcus epidermidis, however, compound 2 showed good inhibitions against Corynebacterium diphtheria when compared with the standard. Compound 3 showed good inhibitory potential against tested Gram-negative bacterial strains i.e. Enterobacter aerogene, Escherichia coli, Salmonella typhi, Salmonella paratyphi A, Shigella flexeneri and Vibrio choleriae. All synthetic derivatives were also tested against eight fungal stains, however, they were weekly active against Aspergillus flavus and Candida albican. The synthesized compounds were characterized by different spectroscopy techniques. (author)

Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

Search for the standard model Higgs boson decaying to a $W$ pair in the fully leptonic final state in $pp$ collisions at $\\sqrt{s}=7$ TeV

Energy Technology Data Exchange (ETDEWEB)

Chatrchyan, Serguei; et al.

2012-03-01

A search for the standard model Higgs boson decaying to W+W- in pp collisions at sqrt(s) = 7 TeV is reported. The data are collected at the LHC with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. The W+W- candidates are selected in events with two charged leptons and large missing transverse energy. No significant excess of events above the standard model background expectations is observed, and upper limits on the Higgs boson production relative to the standard model Higgs expectation are derived. The standard model Higgs boson is excluded in the mass range 129-270 GeV at 95% confidence level.

Deep-learning derived features for lung nodule classification with limited datasets

Science.gov (United States)

Thammasorn, P.; Wu, W.; Pierce, L. A.; Pipavath, S. N.; Lampe, P. D.; Houghton, A. M.; Haynor, D. R.; Chaovalitwongse, W. A.; Kinahan, P. E.

2018-02-01

Only a few percent of indeterminate nodules found in lung CT images are cancer. However, enabling earlier diagnosis is important to avoid invasive procedures or long-time surveillance to those benign nodules. We are evaluating a classification framework using radiomics features derived with a machine learning approach from a small data set of indeterminate CT lung nodule images. We used a retrospective analysis of 194 cases with pulmonary nodules in the CT images with or without contrast enhancement from lung cancer screening clinics. The nodules were contoured by a radiologist and texture features of the lesion were calculated. In addition, sematic features describing shape were categorized. We also explored a Multiband network, a feature derivation path that uses a modified convolutional neural network (CNN) with a Triplet Network. This was trained to create discriminative feature representations useful for variable-sized nodule classification. The diagnostic accuracy was evaluated for multiple machine learning algorithms using texture, shape, and CNN features. In the CT contrast-enhanced group, the texture or semantic shape features yielded an overall diagnostic accuracy of 80%. Use of a standard deep learning network in the framework for feature derivation yielded features that substantially underperformed compared to texture and/or semantic features. However, the proposed Multiband approach of feature derivation produced results similar in diagnostic accuracy to the texture and semantic features. While the Multiband feature derivation approach did not outperform the texture and/or semantic features, its equivalent performance indicates promise for future improvements to increase diagnostic accuracy. Importantly, the Multiband approach adapts readily to different size lesions without interpolation, and performed well with relatively small amount of training data.

Implementation of multimode release criteria and dose standard alternatives

International Nuclear Information System (INIS)

Klett, R.

1993-01-01

The current standard that regulates the disposal of high-level radioactive wastes (HLW) and transuranic (TRU) wastes evaluates the cumulative risk of all repositories with a single derived set of generic release limits. This paper reviews the technical basis, attributes, and deficiencies of the present approach and two alternative modifications and extensions. The alternatives are the multimode release limits applied at the point of release and a dose standard alternative suggested at the first Electric Power Research Institute (EPRI) waste disposal workshop. Methods of developing and applying the alternatives are presented and some suggestions are given for incorporating them in the standards

Repair mechanisms and exposure standards

International Nuclear Information System (INIS)

Mills, W.A.

1978-01-01

The following topics are discussed; public policy for setting radiation standards; use of linear, nonthreshold theory in setting radiation standards; dose-rate dependence; occupational exposure to radiation; radon inhalation from radium in the soil in the vicinity of the phosphate industry; relation of repair mechanisms for cell survival to cancer induction; application of information on genetic repair to humans and to cancer induction; importance of repair processes in radiation protection standards; corrective factors for repair processes; relation of repair processes to age, sex, and other factors; and population distribution in radiosensitivity

On the use of Monte Carlo-derived dosimetric data in the estimation of patient dose from CT examinations

International Nuclear Information System (INIS)

Perisinakis, Kostas; Tzedakis, Antonis; Damilakis, John

2008-01-01

The purpose of this work was to investigate the applicability and appropriateness of Monte Carlo-derived normalized data to provide accurate estimations of patient dose from computed tomography (CT) exposures. Monte Carlo methodology and mathematical anthropomorphic phantoms were used to simulate standard patient CT examinations of the head, thorax, abdomen, and trunk performed on a multislice CT scanner. Phantoms were generated to simulate the average adult individual and two individuals with different body sizes. Normalized dose values for all radiosensitive organs and normalized effective dose values were calculated for standard axial and spiral CT examinations. Discrepancies in CT dosimetry using Monte Carlo-derived coefficients originating from the use of: (a) Conversion coefficients derived for axial CT exposures, (b) a mathematical anthropomorphic phantom of standard body size to derive conversion coefficients, and (c) data derived for a specific CT scanner to estimate patient dose from CT examinations performed on a different scanner, were separately evaluated. The percentage differences between the normalized organ dose values derived for contiguous axial scans and the corresponding values derived for spiral scans with pitch=1 and the same total scanning length were up to 10%, while the corresponding percentage differences in normalized effective dose values were less than 0.7% for all standard CT examinations. The normalized organ dose values for standard spiral CT examinations with pitch 0.5-1.5 were found to differ from the corresponding values derived for contiguous axial scans divided by the pitch, by less than 14% while the corresponding percentage differences in normalized effective dose values were less than 1% for all standard CT examinations. Normalized effective dose values for the standard contiguous axial CT examinations derived by Monte Carlo simulation were found to considerably decrease with increasing body size of the mathematical phantom

Standard molar enthalpies of formation of three N-benzoylthiocarbamic-O-alkylesters

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Santos, Luis M.N.B.F.; Schroeder, Bernd; Dietze, Frank; Beyer, Lothar

2004-01-01

The standard (p 0 =0.1 MPa) molar enthalpies of combustion in oxygen of three crystalline N-benzoylthiocarbamic-O-alkylesters, PhCONHCSOR, R=Et (Hbtcee), n-Bu (Hbtcbe), n-Hex (Hbtche), were measured at T=298.15 K by rotating bomb calorimetry. The standard molar enthalpies of sublimation of the three compounds were measured using Calvet microcalorimetry. These values were used to derive the standard molar enthalpies of formation of the compounds in their crystalline and gaseous phases, respectively

Evaluation of preservative effectiveness of gallic acid derivatives in aluminum hydroxide gel-USP

Directory of Open Access Journals (Sweden)

Anurag Khatkar

2013-01-01

Full Text Available Background: Preservatives are added to most of the pharmaceutical preparations to prevent them from deterioration throughout their shelf life. Literature reveals that the common synthetic preservatives have many limitations, such as development of microbial resistance (in due course of time and several serious side-effects. Aim: The aim of this study is to find out new preservatives synthesized from natural sources, which may have better efficiency than the existing synthetic preservatives. The derivatives of naturally occurring gallic acid were subjected for their preservative efficacy study. Their preservative efficiency was evaluated and compared with the standard parabens. Materials and Methods: The selected amide, anilide and ester derivatives of gallic acid were subjected to preservative efficacy testing in an official antacid preparation, {aluminum hydroxide gel-USP (United States Pharmacopoeia} against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Candida albicans, and Aspergillus niger as representative challenging microorganisms as per USP 2004 guidelines. Results: The selected derivatives were found to be effective against all selected strains and showed preservative efficacy comparable to that of standard and even better in case E. coli, C. albicans and A. niger. The 8-hydroxy quinoline ester derivative showed better preservative efficacy than standard as well as other derivatives. Conclusion: The newly synthesized gallic acid preservatives were found to be effective in the proposed pharmaceutical preparation (Aluminium Hydroxide Gel - USP. Also, the synthesized preservatives have shown comparative and even better efficacy than the existing parabens and hence they have potential for use in pharmaceutical preparations.

Relation between the national handbook of recommended methods for water data acquisition and ASTM standards

Science.gov (United States)

Glysson, G. Douglas; Skinner, John V.

1991-01-01

In the late 1950's, intense demands for water and growing concerns about declines in the quality of water generated the need for more water-resources data. About thirty Federal agencies, hundreds of State, county and local agencies, and many private organizations had been collecting water data. However, because of differences in procedures and equipment, many of the data bases were incompatible. In 1964, as a step toward establishing more uniformity, the Bureau of the Budget (now the Office of Management and Budget, OMB) issued 'Circular A-67' which presented guidelines for collecting water data and also served as a catalyst for creating the Office of Water Data Coordination (OWDC) within the U.S. Geological Survey. This paper discusses past, present, and future aspects of the relation between methods in the National Handbook and standards published by ASTM (American Society for Testing and Materials) Committee D-19 on Water's Subcommittee D-19.07 on Sediment, Geomorphology, and Open Channel Flow. The discussion also covers historical aspects of standards - development work jointly conducted by OWDC and ASTM.

Interviewer-Respondent Interactions in Conversational and Standardized Interviewing

Science.gov (United States)

Mittereder, Felicitas; Durow, Jen; West, Brady T.; Kreuter, Frauke; Conrad, Frederick G.

2018-01-01

Standardized interviewing (SI) and conversational interviewing are two approaches to collect survey data that differ in how interviewers address respondent confusion. This article examines interviewer-respondent interactions that occur during these two techniques, focusing on requests for and provisions of clarification. The data derive from an…

17 CFR 229.1115 - (Item 1115) Certain derivatives instruments.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 1115) Certain derivatives instruments. 229.1115 Section 229.1115 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD INSTRUCTIONS FOR FILING FORMS UNDER SECURITIES ACT OF 1933, SECURITIES EXCHANGE ACT OF...

Chaetopyranin, a benzaldehyde derivative, and other related metabolites from Chaetomium globosum, an endophytic fungus derived from the marine red alga Polysiphonia urceolata.

Science.gov (United States)

Wang, Song; Li, Xiao-Ming; Teuscher, Franka; Li, Dong-Li; Diesel, Arnulf; Ebel, Rainer; Proksch, Peter; Wang, Bin-Gui

2006-11-01

Cultivation of the endophytic fungus Chaetomium globosum, which was isolated from the inner tissue of the marine red alga Polysiphonia urceolata, resulted in the isolation of chaetopyranin (1), a new benzaldehyde secondary metabolite. Ten known compounds were also isolated, including two benzaldehyde congeners, 2-(2',3-epoxy-1',3'-heptadienyl)-6-hydroxy-5-(3-methyl-2-butenyl)benzaldehyde (2) and isotetrahydroauroglaucin (3), two anthraquinone derivatives, erythroglaucin (4) and parietin (5), five asperentin derivatives including asperentin (6, also known as cladosporin), 5'-hydroxy-asperentin-8-methylether (7), asperentin-8-methyl ether (8), 4'-hydroxyasperentin (9), and 5'-hydroxyasperentin (10), and the prenylated diketopiperazine congener neoechinulin A (11). The structures of these compounds were determined on the basis of their spectroscopic data analysis (1H, 13C, 1H-1H COSY, HMQC, and HMBC NMR, as well as low- and high-resolution mass experiments). To our knowledge, compound 1 represents the first example of a 2H-benzopyran derivative of marine algal-derived fungi as well as of the fungal genus Chaetomium. Each isolate was tested for its DPPH (1,1-diphenyl-2-picrylhydrazyl) radical-scavenging property. Compounds 1-4 were found to have moderate activity. Chaetopyranin (1) also exhibited moderate to weak cytotoxic activity toward several tumor cell lines.

Human exposure standards in the frequency range 1 Hz To 100 kHz: the case for adoption of the IEEE standard.

Science.gov (United States)

Patrick Reilly, J

2014-10-01

Differences between IEEE C95 Standards (C95.6-2002 and C95.1-2005) in the low-frequency (1 Hz-100 kHz) and the ICNIRP-2010 guidelines appear across the frequency spectrum. Factors accounting for lack of convergence include: differences between the IEEE standards and the ICNIRP guidelines with respect to biological induction models, stated objectives, data trail from experimentally derived thresholds through physical and biological principles, selection and justification of safety/reduction factors, use of probability models, compliance standards for the limbs as distinct from the whole body, defined population categories, strategies for central nervous system protection below 20 Hz, and correspondence of environmental electric field limits with contact currents. This paper discusses these factors and makes the case for adoption of the limits in the IEEE standards.

What Makes Umbilical Cord Tissue-Derived Mesenchymal Stromal Cells Superior Immunomodulators When Compared to Bone Marrow Derived Mesenchymal Stromal Cells?

Directory of Open Access Journals (Sweden)

R. N. Bárcia

2015-01-01

Full Text Available MSCs derived from the umbilical cord tissue, termed UCX, were investigated for their immunomodulatory properties and compared to bone marrow-derived MSCs (BM-MSCs, the gold-standard in immunotherapy. Immunogenicity and immunosuppression were assessed by mixed lymphocyte reactions, suppression of lymphocyte proliferation and induction of regulatory T cells. Results showed that UCX were less immunogenic and showed higher immunosuppression activity than BM-MSCs. Further, UCX did not need prior activation or priming to exert their immunomodulatory effects. This was further corroborated in vivo in a model of acute inflammation. To elucidate the potency differences observed between UCX and BM-MSCs, gene expression related to immune modulation was analysed in both cell types. Several gene expression profile differences were found between UCX and BM-MSCs, namely decreased expression of HLA-DRA, HO-1, IGFBP1, 4 and 6, ILR1, IL6R and PTGES and increased expression of CD200, CD273, CD274, IL1B, IL-8, LIF and TGFB2. The latter were confirmed at the protein expression level. Overall, these results show that UCX seem to be naturally more potent immunosuppressors and less immunogenic than BM-MSCs. We propose that these differences may be due to increased levels of immunomodulatory surface proteins such as CD200, CD273, CD274 and cytokines such as IL1β, IL-8, LIF and TGFβ2.

How Standards Enable the Emergence of Sustainable Construction as a New Organizational Field

DEFF Research Database (Denmark)

Boxenbaum, Eva; Georg, Susse; Reijonen, Satu

This paper examines the role of standards in the emergence of new fields. We analyzed the current formation of sustainable construction as a new field within the Danish construction sector. Data were derived from four qualitative studies on mandatory and voluntary standards pertaining to sustaina...

On Inter-deriving Small-step and Big-step Semantics

DEFF Research Database (Denmark)

Danvy, Olivier; Millikin, Kevin; Munk, Johan

2012-01-01

Starting from the standard call-by-need reduction for the λ-calculus that is common to Ariola, Felleisen, Maraist, Odersky, and Wadler, we inter-derive a series of hygienic semantic artifacts: a reduction-free storeless abstract machine, a continuation-passing evaluation function, and what appears...... of Cartwright and Felleisen. Overall, the semantic artifacts presented here are simpler than many other such artifacts that have been independently worked out, and which require ingenuity, skill, and independent soundness proofs on a case-by-case basis. They are also simpler to inter-derive because the inter...

Steroid radioimmunoassay: contribution of standards to blank values, ch. 4

International Nuclear Information System (INIS)

Froelich, M.; Termorshuizen, W.; Kenter, E.; Molenaar, A.J.

1977-01-01

The sensitivity of the radioimmunoassay of steroids is considerably reduced by high blank values which may be derived in part from co-chromatographed standards. Blank levels approach the detection limit of the radioimmunoassay of aldosterone, testosterone and androstenedione when 10,000 dpm (30-35 pg) labelled steroids are used as reference standard. When 20 μg aldosterone, testosterone, or androstenedione is used as standard, blank levels of up to 12,800 pg were measured in the radioimmunoassay. Application of the standards on a separate strip does not improve the results. From the experiments it appeared that contamination took place by transport by the solvent

Uncertainty in relative energy resolution measurements

International Nuclear Information System (INIS)

Volkovitsky, P.; Yen, J.; Cumberland, L.

2007-01-01

We suggest a new method for the determination of the detector relative energy resolution and its uncertainty based on spline approximation of experimental spectra and a statistical bootstrapping procedure. The proposed method is applied to the spectra obtained with NaI(Tl) scintillating detectors and 137 Cs sources. The spectrum histogram with background subtracted channel-by-channel is modeled by cubic spline approximation. The relative energy resolution (which is also known as pulse height resolution and energy resolution), defined as the full-width at half-maximum (FWHM) divided by the value of peak centroid, is calculated using the intercepts of the spline curve with the line of the half peak height. The value of the peak height is determined as the point where the value of the derivative goes to zero. The residuals, which are normalized over the square root of counts in a given bin (y-coordinate), obey the standard Gaussian distribution. The values of these residuals are randomly re-assigned to a different set of y-coordinates where a new 'pseudo-experimental' data set is obtained after 'de-normalization' of the old values. For this new data set a new spline approximation is found and the whole procedure is repeated several hundred times, until the standard deviation of relative energy resolution becomes stabilized. The standard deviation of relative energy resolutions calculated for each 'pseudo-experimental' data set (bootstrap uncertainty) is considered to be an estimate for relative energy resolution uncertainty. It is also shown that the relative bootstrap uncertainty is proportional to, and generally only two to three times bigger than, 1/√(N tot ), which is the relative statistical count uncertainty (N tot is the total number of counts under the peak). The newly suggested method is also applicable to other radiation and particle detectors, not only for relative energy resolution, but also for any of the other parameters in a measured spectrum, like

Standard molar enthalpies of formation of monochloroacetophenone isomers

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Amaral, Luisa M.P.F.

2010-01-01

The standard (p 0 =0.1MPa) molar enthalpies of formation of the liquids 2'-, 3'-, and 4'-chloroacetophenones were derived from the standard molar energies of combustion, in oxygen, to yield CO 2 (g) and HCl . 600H 2 O(l), at T = 298.15 K, measured by rotating-bomb combustion calorimetry. The Calvet microcalorimetry was used to measure the enthalpies of vaporization of the three compounds. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the chloroacetophenone isomers, in the gaseous phase, at T = 298.15 K. (table) An empirical scheme, developed by Cox, was used to estimate the gas-phase enthalpies of formation and the obtained values were compared with the experimental ones.

Corporate interest rate risk management with derivatives in Australia: empirical results

Directory of Open Access Journals (Sweden)

Luiz Augusto Ferreira Carneiro

2008-04-01

Full Text Available Financial and insurance theories explain that large widely-held corporations manage corporate risks if doing so is costective to reduce frictional costs such as taxes, agency costs and financial distress costs. A large number of previous empirical studies, most in the U.S., have tested the hypotheses underlying corporate risk management with financial derivative instruments. In order to quantify corporate hedge demand, most previous studies have used the ratio of principal notional amount of derivatives to company size, although they recognize that company size is not an appropriate proxy for financial risk. This paper analyzes the interest-rate-risk hedge demand by Australian companies, measured through the ratio of principal notional amount of interest rate derivatives to interest-rate-riskbearing liabilities. Modern panel data methods are used, with two panel data sets from 1998 to 2003 (1102 and 465 observations, respectively. Detailed information about interest-rate-risk exposures was available after manual data collection from financial annual reports, which was only possible due to specific reporting requirements in Australian accounting standards. Regarding the analysis of the extent of hedge, our measurement of interest-rate-risk exposures generates some significant results di erent from those found in previous studies. For example, this study shows that total leverage (total debt ratio is not significantly important to interest-rate-risk hedge demand and that, instead, this demand is related to the specific risk exposure in the interest bearing part of the firms liabilities. This study finds significant relations of interest-rate-risk hedge to company size, floating-interest-rate debt ratio, annual log returns, and company industry type (utilities and non-banking financial institutions.

The thermal evolution of universe: standard model

International Nuclear Information System (INIS)

Nascimento, L.C.S. do.

1975-08-01

A description of the dynamical evolution of the Universe following a model based on the theory of General Relativity is made. The model admits the Cosmological principle,the principle of Equivalence and the Robertson-Walker metric (of which an original derivation is presented). In this model, the universe is considered as a perfect fluid, ideal and symmetric relatively to the number of particles and antiparticles. The thermodynamic relations deriving from these hypothesis are derived, and from them the several eras of the thermal evolution of the universe are established. Finally, the problems arising from certain specific predictions of the model are studied, and the predictions of the abundances of the elements according to nucleosynthesis and the actual behavior of the universe are analysed in detail. (author) [pt

Transport behaviour of commercially available 100-Omega standard resistors

CSIR Research Space (South Africa)

Schumacher, B

2001-04-01

Full Text Available Several types of commercial 100-Omega resistors can be used with the cryogenic current comparator to maintain the resistance unit, derived from the Quantized Hall Effect (QHE), and to disseminate this unit to laboratory resistance standards. Up...

Comments on 'Standard effective doses for proliferative tumours'

International Nuclear Information System (INIS)

Dasu, Iuliana Livia; Dasu, Alexandru; Denekamp, Juliana; Fowler, Jack F.

2000-01-01

We should like to make some comments on the paper published by Jones et al (1999). The paper presents some interesting and useful contributions on the theoretical evaluation of different fractionated schedules used now. The use of the linear quadratic equation has been very useful in focusing attention on the differences in fractionation responses of fast and slow proliferating normal tissues and tumours. Unfortunately the BED 10 or BED 3 units for (α/β ratios of 10 Gy and 3 Gy respectively) do not directly relate to anything used in routine clinical practice. The purpose of the paper by Jones et al (1999) is to covert any new schedule into the equivalent total dose as if it was given in the same size fractions as are in common use in that department. They illustrate that, if proliferation is taken into account for the altered schedule, it can be compared in two ways with the standard conventional schedule: (a) the proliferative standard effective dose one (PSED 1 ) in which the proliferation correction is applied in the altered schedule, but not in the standard schedule; (b) the proliferative standard effective dose two (PSED 2 ) in which the proliferation correction is applied to both schedules using the same proliferation parameters. This is expected to provide a better evaluation of the response of a 'real' tumour (i.e. a tumour that also proliferates during the standard treatment). However, there seem to be two errors in the paper. First, the authors quoted a wrong equation for calculating the proliferative standard effective dose two (PSED 2 ) (equations (2) and (A6) in their paper). There are also some special cases with respect to the time available for proliferation and the duration of the treatment that have been neglected in their paper and which require further specification. Therefore, we should like to give the full mathematical derivation of the correct equations for calculating the proliferative standard effective doses. We would also like to make

Using the Chain Rule as the Key Link in Deriving the General Rules for Differentiation

Science.gov (United States)

Sprows, David

2011-01-01

The standard approach to the general rules for differentiation is to first derive the power, product, and quotient rules and then derive the chain rule. In this short article we give an approach to these rules which uses the chain rule as the main tool in deriving the power, product, and quotient rules in a manner which is more student-friendly…

Derivation of mass relations for composite W* and Z* from effective Lagrangian approach

International Nuclear Information System (INIS)

Yasue, Masaki; Oneda, Sadao.

1985-04-01

In an effective-Lagrangian model with gauge bosons (W,Z,γ) and their neighboring spin J=1 composites (W*,Z*), we find relations among their masses, m sub(W), m sub(Z), m sub(W*) and m sub(Z*): m sub(W) m sub(W*) = cos theta m sub(Z) m sub(Z*) (as a generalization of m sub(W) = cos theta m sub(Z)) and m sub(W) 2 + m sub(W*) 2 + tan 2 theta m sub(W0) 2 = m sub(Z) 2 + m sub(Z*) 2 with m sub(W0) being the mass of W in the standard model provided that the system respects the SU(2) sub(L) x U(1) sub(Y) symmetry. W* and Z* are taken as the lowest-lying excited states belonging to an SU(2) sub(L)-triplet in the symmetric limit. The existence of W* coupling to the V-A current modifies the relation between G sub(F) and M sub(W) and that of Z* generates a new interaction of the (Jsup(em)) 2 -type as well as the deviation of sin theta sub(W) observed at low energies from the mixing angle sin theta in neutral-current interactions. (author)

Inconsistency of Minkowski higher-derivative theories

Energy Technology Data Exchange (ETDEWEB)

Aglietti, Ugo G. [Universita di Roma ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Anselmi, Damiano [Universita di Pisa, Dipartimento di Fisica ' ' Enrico Fermi' ' , Pisa (Italy); INFN, Sezione di Pisa, Pisa (Italy)

2017-02-15

We show that Minkowski higher-derivative quantum field theories are generically inconsistent, because they generate nonlocal, non-hermitian ultraviolet divergences, which cannot be removed by means of standard renormalization procedures. By ''Minkowski theories'' we mean theories that are defined directly in Minkowski spacetime. The problems occur when the propagators have complex poles, so that the correlation functions cannot be obtained as the analytic continuations of their Euclidean versions. The usual power counting rules fail and are replaced by much weaker ones. Self-energies generate complex divergences proportional to inverse powers of D'Alembertians. Three-point functions give more involved nonlocal divergences, which couple to infrared effects. We illustrate the violations of the locality and hermiticity of counterterms in scalar models and higher-derivative gravity. (orig.)

Platelet-rich plasma and its derivatives as promising bioactive materials for regenerative medicine: basic principles and concepts underlying recent advances.

Science.gov (United States)

Kawase, Tomoyuki

2015-05-01

Over the past decade, platelet-rich plasma (PRP), a platelet-concentrated plasma fraction, has been widely investigated and applied to regenerative medicine. The clinical utility of PRP is supported by evidence that PRP contains high concentrations of platelet-related growth factors and normal concentrations of plasma-derived fibrinogen, both of which contribute synergistically to the regenerative process. Additionally, its superior cost-efficacy versus conventional therapies is attractive to many clinicians. However, current disadvantages of PRP include a relatively complicated preparation procedure and variable operator-dependent efficacy. An additional disadvantage is the use of bovine thrombin, an animal-derived biological, as a coagulant. Many of these disadvantages are overcome by recent advances in preparation procedures and devices; for example, Joseph Choukroun simplified the platelet-rich fibrin preparation procedure and improved handling efficiency without the aid of animal-derived factors. With advancements in cell processing technology, there has been a general shift in cell therapy from autologous to allogeneic treatment; however, autologous PRP therapy will not easily be replaced by allogeneic treatment in the near future. Therefore, to provide more predictable regenerative therapy outcomes using autologous PRP, further investigations should address developing a standardized procedure for PRP preparation to augment its efficacy and potency, independent of donor variability. We would then propose that operators and clinicians prepare PRP according to the standardized protocol and to carefully evaluate the clinical scenario (i.e., recipient factors comprising skeletal defects) to determine which factor(s) should be added to PRP preparations. This careful approach will lead to improved clinical outcomes for patients.

Internal emitter research and standard setting

International Nuclear Information System (INIS)

Stannard, J.N.

1981-01-01

The history of the use of data from internal emitter research in the derivation of safety standards is reviewed. At first, observed biological effects were correlated with body burdens or exposure levels. This direct approach is illustrated by detailed accounts of the cases of uranium and plutonium. In the 1950's, when it was decided to provide standards for over 200 isotopes, the direct approach was replaced by a system of calculations. This necessitated changes in internal emitter research programs to provide metabolic data, and the development of models such as Reference Man and the Lung and Gastrointestinal Tract models. The continuing contribution of internal emitter research to standard setting can be seen in the references quoted in the metabolic data section of the new ICRP report (ICRP Publication 30). Present trends suggest a possible return to the direct use of internal emitter effects data for obtaining risk estimates. (U.K.)

Oblique projections and standard-form transformations for discrete inverse problems

DEFF Research Database (Denmark)

Hansen, Per Christian

2013-01-01

This tutorial paper considers a specific computational tool for the numerical solution of discrete inverse problems, known as the standard-form transformation, by which we can treat general Tikhonov regularization problems efficiently. In the tradition of B. N. Datta's expositions of numerical li...... linear algebra, we use the close relationship between oblique projections, pseudoinverses, and matrix computations to derive a simple geometric motivation and algebraic formulation of the standard-form transformation....

Investigating the Language Demands in the Common Core State Standards for English Language Learners: A Comparison Study of Standards

Science.gov (United States)

Wolf, Mikyung Kim; Wang, Yuan; Huang, Becky H.; Blood, Ian

2014-01-01

This study reports on a critical review of the language demands contained in the Common Core State Standards for English language arts (CCSS-ELA) with the aim of deriving important implications for the instruction of English language learners. The language demands of the CCSS-ELA were compared with those of existing English language arts (ELA) and…

Calculation of the yearly energy performance of heating systems based on the European Building Energy Directive and related CEN Standards

DEFF Research Database (Denmark)

Olesen, Bjarne W.; de Carli, Michele

2011-01-01

According to the Energy Performance of Buildings Directive (EPBD) all new European buildings (residential, commercial, industrial, etc.) must since 2006 have an energy declaration based on the calculated energy performance of the building, including heating, ventilating, cooling and lighting syst......–20% of the building energy demand. The additional loss depends on the type of heat emitter, type of control, pump and boiler. Keywords: Heating systems; CEN standards; Energy performance; Calculation methods......According to the Energy Performance of Buildings Directive (EPBD) all new European buildings (residential, commercial, industrial, etc.) must since 2006 have an energy declaration based on the calculated energy performance of the building, including heating, ventilating, cooling and lighting...... systems. This energy declaration must refer to the primary energy or CO2 emissions. The European Organization for Standardization (CEN) has prepared a series of standards for energy performance calculations for buildings and systems. This paper presents related standards for heating systems. The relevant...

IASI-derived NH3 enhancement ratios relative to CO for the tropical biomass burning regions

Science.gov (United States)

Whitburn, Simon; Van Damme, Martin; Clarisse, Lieven; Hurtmans, Daniel; Clerbaux, Cathy; Coheur, Pierre-François

2017-10-01

Vegetation fires are a major source of ammonia (NH3) in the atmosphere. Their emissions are mainly estimated using bottom-up approaches that rely on uncertain emission factors. In this study, we derive new biome-specific NH3 enhancement ratios relative to carbon monoxide (CO), ERNH3 / CO (directly related to the emission factors), from the measurements of the IASI sounder onboard the Metop-A satellite. This is achieved for large tropical regions and for an 8-year period (2008-2015). We find substantial differences in the ERNH3 / CO ratios between the biomes studied, with calculated values ranging from 7 × 10-3 to 23 × 10-3. For evergreen broadleaf forest these are typically 50-75 % higher than for woody savanna and savanna biomes. This variability is attributed to differences in fuel types and size and is in line with previous studies. The analysis of the spatial and temporal distribution of the ERNH3 / CO ratio also reveals a (sometimes large) within-biome variability. On a regional level, woody savanna shows, for example, a mean ERNH3 / CO ratio for the region of Africa south of the Equator that is 40-75 % lower than in the other five regions studied, probably reflecting regional differences in fuel type and burning conditions. The same variability is also observed on a yearly basis, with a peak in the ERNH3 / CO ratio observed for the year 2010 for all biomes. These results highlight the need for the development of dynamic emission factors that take into better account local variations in fuel type and fire conditions. We also compare the IASI-derived ERNH3 / CO ratio with values reported in the literature, usually calculated from ground-based or airborne measurements. We find general good agreement in the referenced ERNH3 / CO ratio except for cropland, for which the ERNH3 / CO ratio shows an underestimation of about 2-2.5 times.

Standard molar enthalpy of formation of 1-benzosuberone: An experimental and computational study

International Nuclear Information System (INIS)

Miranda, Margarida S.; Morais, Victor M.F.; Matos, M. Agostinha R.; Liebman, Joel F.

2010-01-01

The energetics of 1-benzosuberone was studied by a combination of calorimetric techniques and computational calculations. The standard (p o = 0.1 MPa) molar enthalpy of formation of 1-benzosuberone, in the liquid phase, was derived from the massic energy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpy of vaporization, at T = 298.15 K, was measured by Calvet microcalorimetry. From these two parameters the standard (p o = 0.1 MPa) molar enthalpy of formation, in the gaseous phase, at T = 298.15 K, was derived: -(96.1 ± 3.4) kJ . mol -1 . The G3(MP2)//B3LYP composite method and appropriate reactions were used to computationally calculate the standard molar enthalpy of formation of 1-benzosuberone, in the gaseous phase, at T = 298.15 K. The computational results are in very good agreement with the experimental value.

Enhanced fluorescence detection of dansyl derivatives of phenolic compounds using a postcolumn photochemical reactor and application to chlorophenols in river water

Energy Technology Data Exchange (ETDEWEB)

de Ruiter, C.; Bohle, J.F.; de Jong, G.J.; Brinkman, U.A.T.; Frei, R.W.

1988-04-01

Photochemical decomposition by ultraviolet (UV) irradiation of dansyl derivatives of phenolic compounds in methanol-water mixtures leads to the formation of highly fluorescent dansyl-OH and dansyl-OCH/sub 3/. With substituted phenols as model compounds, it is demonstrated that inductive effects, caused by the substituents, play a major role in the gain in fluorescence signal (up to 8000-fold) that is obtained after postcolumn UV irradiation of the dansyl derivative, compared to that of the nonirradiated derivative. The optimal irradiation time for the dansyl derivatives is about 5.5 s. All monosubstituted phenolic dansyl derivatives now have a comparable limit of detection of approximately 200 pg (S/N = 3). The calibration curve of dansylated pentachlorophenol, using the postcolumn photochemical reactor under optimal conditions, is linear over at least 3 orders of magnitude with a correlation coefficient of 0.9999 (n = 9). Application of the system to the liquid chromatographic determination of highly chlorinated phenols in river water is presented. The repeatability of the system for a river water sample, spiked with 1 ppb pentachlorophenol, is 2.4% relative standard deviation (n = 5).

Failure trend analysis for safety related components of Korean standard NPPs

International Nuclear Information System (INIS)

Choi, Sun Yeong; Han, Sang Hoon

2005-01-01

The component reliability data of Korean NPP that reflects the plant specific characteristics is required necessarily for PSA of Korean nuclear power plants. We have performed a project to develop the component reliability database (KIND, Korea Integrated Nuclear Reliability Database) and S/W for database management and component reliability analysis. Based on the system, we have collected the component operation data and failure/repair data during from plant operation date to 2002 for YGN 3, 4 and UCN 3, 4 plants. Recently, we provided the component failure rate data for UCN 3, 4 standard PSA model from the KIND. We evaluated the components that have high-ranking failure rates with the component reliability data from plant operation date to 1998 and 2000 for YGN 3,4 and UCN 3, 4 respectively. We also identified their failure mode that occurred frequently. In this study, we analyze the component failure trend and perform site comparison based on the generic data by using the component reliability data which is extended to 2002 for UCN 3, 4 and YGN 3, 4 respectively. We focus on the major safety related rotating components such as pump, EDG etc

Energetics of thiophenecarboxaldehydes and some of its alkyl derivatives

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Santos, Ana Filipa L.O.M.

2008-01-01

The standard (p 0 = 0.1 MPa) molar enthalpies of combustion, Δ c H m 0 , for the liquids 2-thiophenecarboxaldehyde, 3-thiophenecarboxaldehyde, 3-methyl-2-thiophenecarboxaldehyde, 5-methyl-2-thiophenecarboxaldehyde, and 5-ethyl-2-thiophenecarboxaldehyde were determined, at the temperature of 298.15 K, using a rotating-bomb combustion calorimeter. For these five compounds, the standard molar enthalpies of vaporization, Δ l g H m 0 , at T = 298.15 K were obtained by high temperature Calvet microcalorimetry. The standard molar enthalpies of formation of the title compounds, in the gaseous phase, were derived through these experimental thermodynamic parameters and the results are interpreted in terms of structural effects and compared with structurally similar compounds

Fractional derivatives. An introduction; Derivate frazionarie. Che cosa sono, a cosa servono

Energy Technology Data Exchange (ETDEWEB)

Dattoli, G. [ENEA, Div. Fisica Applicata, Centro Ricerche Frascati, Rome (Italy)

2001-07-01

In this item is presented a brief survey of fractional calculus and of the relevant applications. In the work are discussed different points of view of the operation of fractional derivative and present a unifying definition. The role played by fractional derivatives and integrals within the framework of integral transform is analyzed. [Italian] In questo articolo si traccia un profilo del cosidetto calcolo frazionario e delle relative applicazioni a problemi di matematica pura ed applicata. Si discutono varie definizioni dell'operazione di derivata frazionaria, non tutte coincidenti fra loro, e si mostra come sia possibile proporre una definizione univoca che inglobi tutte le altre. Si analizza infine il ruolo giocato dalle derivate e dagli integrali frazionari e, piu' in generale, quello degli operatori differenziali ad esponente frazionario, nell'ambito della teoria delle rappresentazioni integrali.

Gaia, an all-sky survey for standard photometry

Science.gov (United States)

Carrasco, J. M.; Weiler, M.; Jordi, C.; Fabricius, C.

2017-03-01

Gaia ESA's space mission (launched in 2013) includes two low resolution spectroscopic instruments (one in the blue, BP, and another in the red, RP, wavelength domains) to classify and derive the astrophysical parameters of the observed sources. As it is well known, Gaia is a full-sky unbiased survey down to about 20th magnitude. The scanning law yields a rather uniform coverage of the sky over the full extent (a minimum of 5 years) of the mission. Gaia data reduction is a global one over the full mission. Both sky coverage and data reduction strategy ensure an unprecedented all-sky homogeneous spectrophotometric survey. Certainly, that survey is of interest for current and future on-ground and space projects, like LSST, PLATO, EUCLID and J-PAS/J-PLUS among others. These projects will benefit from the large amount (more than one billion) and wide variety of objects observed by Gaia with good quality spectrophotometry. Synthetic photometry derived from Gaia spectrophotometry for any passband can be used to expand the set of standard sources for these new instruments to come. In the current Gaia data release scenario, BP/RP spectrophotometric data will be available in the third release (in 2018, TBC). Current preliminary results allow us to estimate the precision of synthetic photometry derived from the Gaia data. This already allows the preparation of the on-going and future surveys and space missions. We discuss here the exploitation of the Gaia spectrophotometry as standard reference due to its full-sky coverage and its expected photometric uncertainties derived from the low resolution Gaia spectra.

3G Standards

DEFF Research Database (Denmark)

Saugstrup, Dan; Henten, Anders

2006-01-01

Purpose – The main purpose of this paper is to analyze which standard/technology will win the 3G mobile markets. In addition, two sub topics are examined. First, which kind of victory will it be – will one technological solution be all-dominating or is co-existence more likely? Second, which....... Originality/value – The paper is based on the understanding that a vast array of different factors in a complex dynamic environment goes into the determination of the outcome of such standardization games. However, the battle between 3G standards has already reached a level, where relatively certain...... predictions can be made. And, the paper contributes with a methodologically based discussion concerning the outcome of the battle between 3G standards....

Adipose-Derived Stem Cells in Novel Approaches to Breast Reconstruction: Their Suitability for Tissue Engineering and Oncological Safety.

Science.gov (United States)

O'Halloran, Niamh; Courtney, Donald; Kerin, Michael J; Lowery, Aoife J

2017-01-01

Adipose-derived stem cells (ADSCs) are rapidly becoming the gold standard cell source for tissue engineering strategies and hold great potential for novel breast reconstruction strategies. However, their use in patients with breast cancer is controversial and their oncological safety, particularly in relation to local disease recurrence, has been questioned. In vitro, in vivo, and clinical studies using ADSCs report conflicting data on their suitability for adipose tissue regeneration in patients with cancer. This review aims to provide an overview of the potential role for ADSCs in breast reconstruction and to examine the evidence relating to the oncologic safety of their use in patients with breast cancer.

Special Relativity Kinematics with Anisotropic Propagation of Light and Correspondence Principle

Science.gov (United States)

Burde, Georgy I.

2016-12-01

transformations derived in such a way, as distinct from the transformations derived in the context of conventionality of distant simultaneity, cannot be converted into the standard Lorentz transformations by a coordinate (synchrony) change. The anisotropic nature of the presented transformations manifests itself in that they do not leave the interval invariant but only provide the conformal invariance of the interval. The relations that represent measurable effects include the conformal factor which depends on the relative velocity of the frames and the anisotropy degree. It is important to note the use of the correspondence principle as a heuristic principle which allows to relate the conformal factor to the anisotropy degree and thus completely specify the transformations and observable quantities.

The development and standardization of testing methods for genetically modified organisms and their derived products.

Science.gov (United States)

Zhang, Dabing; Guo, Jinchao

2011-07-01

As the worldwide commercialization of genetically modified organisms (GMOs) increases and consumers concern the safety of GMOs, many countries and regions are issuing labeling regulations on GMOs and their products. Analytical methods and their standardization for GM ingredients in foods and feed are essential for the implementation of labeling regulations. To date, the GMO testing methods are mainly based on the inserted DNA sequences and newly produced proteins in GMOs. This paper presents an overview of GMO testing methods as well as their standardization. © 2011 Institute of Botany, Chinese Academy of Sciences.

Enabling quaternion derivatives: the generalized HR calculus

Science.gov (United States)

Xu, Dongpo; Jahanchahi, Cyrus; Took, Clive C.; Mandic, Danilo P.

2015-01-01

Quaternion derivatives exist only for a very restricted class of analytic (regular) functions; however, in many applications, functions of interest are real-valued and hence not analytic, a typical case being the standard real mean square error objective function. The recent HR calculus is a step forward and provides a way to calculate derivatives and gradients of both analytic and non-analytic functions of quaternion variables; however, the HR calculus can become cumbersome in complex optimization problems due to the lack of rigorous product and chain rules, a consequence of the non-commutativity of quaternion algebra. To address this issue, we introduce the generalized HR (GHR) derivatives which employ quaternion rotations in a general orthogonal system and provide the left- and right-hand versions of the quaternion derivative of general functions. The GHR calculus also solves the long-standing problems of product and chain rules, mean-value theorem and Taylor's theorem in the quaternion field. At the core of the proposed GHR calculus is quaternion rotation, which makes it possible to extend the principle to other functional calculi in non-commutative settings. Examples in statistical learning theory and adaptive signal processing support the analysis. PMID:26361555

Validation of a search strategy to identify nutrition trials in PubMed using the relative recall method.

Science.gov (United States)

Durão, Solange; Kredo, Tamara; Volmink, Jimmy

2015-06-01

To develop, assess, and maximize the sensitivity of a search strategy to identify diet and nutrition trials in PubMed using relative recall. We developed a search strategy to identify diet and nutrition trials in PubMed. We then constructed a gold standard reference set to validate the identified trials using the relative recall method. Relative recall was calculated by dividing the number of references from the gold standard our search strategy identified by the total number of references in the gold standard. Our gold standard comprised 298 trials, derived from 16 included systematic reviews. The initial search strategy identified 242 of 298 references, with a relative recall of 81.2% [95% confidence interval (CI): 76.3%, 85.5%]. We analyzed titles and abstracts of the 56 missed references for possible additional terms. We then modified the search strategy accordingly. The relative recall of the final search strategy was 88.6% (95% CI: 84.4%, 91.9%). We developed a search strategy to identify diet and nutrition trials in PubMed with a high relative recall (sensitivity). This could be useful for establishing a nutrition trials register to support the conduct of future research, including systematic reviews. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Standard molar enthalpies of formation of 1- and 2-cyanonaphthalene

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Lobo Ferreira, Ana I.M.C.; Barros, Ana L.M.; Bessa, Ana R.C.; Brito, Barbara C.S.A.; Vieira, Joana A.S.; Martins, Silvia A.P.

2011-01-01

Highlights: → Enthalpies of formation of 1- and 2-cyanonaphthalene were measured by combustion calorimetry. → Vapor pressures of crystalline 1- and 2-cyanonaphthalene obtained by Knudsen effusion mass loss technique. → Enthalpies, entropies and Gibbs functions of sublimation at T = 298.15 K were calculated. - Abstract: The standard (p o = 0.1 MPa) molar enthalpies of formation, in the crystalline state, of the 1- and 2-cyanonaphthalene were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static-bomb combustion calorimetry. Vapor pressure measurements at different temperatures, using the Knudsen mass loss effusion technique, enabled the determination of the enthalpy, entropy, and Gibbs energy of sublimation, at T = 298.15 K, for both isomers. The standard molar enthalpies of sublimation, at T = 298.15 K, for 1- and 2-cyanonaphthalene, were also measured by high-temperature Calvet microcalorimetry. (table) Combining these two experimental values, the gas-phase standard molar enthalpies, at T = 298.15 K, were derived and compared with those estimated by employing two different methodologies: one based on the Cox scheme and the other one based on G3MP2B3 calculations. The calculated values show a good agreement with the experimental values obtained in this work.

Optimal economic order quantity for buyer-distributor-vendor supply chain with backlogging derived without derivatives

Science.gov (United States)

Teng, Jinn-Tsair; Cárdenas-Barrón, Leopoldo Eduardo; Lou, Kuo-Ren; Wee, Hui Ming

2013-05-01

In this article, we first complement an inappropriate mathematical error on the total cost in the previously published paper by Chung and Wee [2007, 'Optimal the Economic Lot Size of a Three-stage Supply Chain With Backlogging Derived Without Derivatives', European Journal of Operational Research, 183, 933-943] related to buyer-distributor-vendor three-stage supply chain with backlogging derived without derivatives. Then, an arithmetic-geometric inequality method is proposed not only to simplify the algebraic method of completing prefect squares, but also to complement their shortcomings. In addition, we provide a closed-form solution to integral number of deliveries for the distributor and the vendor without using complex derivatives. Furthermore, our method can solve many cases in which their method cannot, because they did not consider that a squared root of a negative number does not exist. Finally, we use some numerical examples to show that our proposed optimal solution is cheaper to operate than theirs.

Synthesis, characterization and biological behavior of some Schiff's and Mannich base derivatives of Lamotrigine

Directory of Open Access Journals (Sweden)

A.A. Kulkarni

2017-02-01

Full Text Available A series of various Schiff's and Mannich base derivatives (N1–2 & ND1–6 of Lamotrigine with isatin and substituted isatin were synthesized to get more potent anticonvulsant agents. The starting material for the synthesis of various new Schiff's and Mannich base derivatives was isatin (1H-indole- 2, 3-dione which in turn was prepared from substituted isonitrosoacetanilide using aniline. Lamotrigine reacts with isatin & substituted isatin gave Schiff's bases (N1–2 which on reaction with various secondary amines (dimethylamine, diethylamine, morpholine produced Mannich bases (ND1–6. The structures of newly synthesized compounds were characterized by using TLC, UV, FT-IR, 1HNMR and studied for their anticonvulsant activity. Anticonvulsant activity of all the derivatives was evaluated by MES method using phenobarbitone sodium & Lamotrigine as standard drugs and % reduction of time spent by animals in extension, flexion, clonus, and stupor phase were noted. Compounds ND-4 and ND-6 showed significant anticonvulsant activity when compared with that of standard drugs. The remaining all compounds show moderate activity. Biological activity data of the synthesized derivatives revealed that, the synthesized derivatives are good anticonvulsant agents as compared to Lamotrigine.

Thermochemical properties of two benzimidazole derivatives: 2-Phenyl- and 2-benzylbenzimidazole

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Ribeiro da Silva, Maria das Dores M.C.; Amaral, Luisa M.P.F.; Elguero, Jose; Jimenez, Pilar; Roux, Maria Victoria; Davalos, Juan Z.; Temprado, Manuel; Cabildo, Pilar; Claramunt, Rosa M.; Mo, Otilia; Yanez, Manuel

2005-01-01

The standard (p 0 =0.1MPa) molar enthalpy of formation for gaseous 2-phenylbenzimidazole (2-PhBIM) and 2-benzylbenzimidazole (2-BzBIM) were derived from the standard molar enthalpies of combustion, at T=298.15K, measured by static bomb calorimetry, and the standard molar enthalpy of sublimation, at T=298.15K, measured by Calvet microcalorimetry in the case of 2-phenylbenzimidazole or derived from the variation of the vapour pressures, determined by the Knudsen effusion technique, with temperatures between (393 and 412)K for 2-benzylbenzimidazole. Heat capacities, in the temperature ranges from (268.15 to 322.10)K for 2-phenylbenzimidazole and (270.15 to 316.02)K for 2-benzylbenzimidazole, were also measured with a differential scanning calorimeter. Δ c H m 0 (cr)/kJ.mol -1 Δ cr g H m 0 (T=298.15K)/kJ.mol -1 2-Phenylbenzimidazole (2-PhBIM)-6679.8+/-0.9123.0+/-1.72-Benzylbenzimidazole (2-BzBIM)-7327.1+/-4.0136.2+/-0.5

PDX-MI: Minimal Information for Patient-Derived Tumor Xenograft Models

NARCIS (Netherlands)

Meehan, Terrence F.; Conte, Nathalie; Goldstein, Theodore; Inghirami, Giorgio; Murakami, Mark A.; Brabetz, Sebastian; Gu, Zhiping; Wiser, Jeffrey A.; Dunn, Patrick; Begley, Dale A.; Krupke, Debra M.; Bertotti, Andrea; Bruna, Alejandra; Brush, Matthew H.; Byrne, Annette T.; Caldas, Carlos; Christie, Amanda L.; Clark, Dominic A.; Dowst, Heidi; Dry, Jonathan R.; Doroshow, James H.; Duchamp, Olivier; Evrard, Yvonne A.; Ferretti, Stephane; Frese, Kristopher K.; Goodwin, Neal C.; Greenawalt, Danielle; Haendel, Melissa A.; Hermans, Els; Houghton, Peter J.; Jonkers, Jos; Kemper, Kristel; Khor, Tin O.; Lewis, Michael T.; Lloyd, K. C. Kent; Mason, Jeremy; Medico, Enzo; Neuhauser, Steven B.; Olson, James M.; Peeper, Daniel S.; Rueda, Oscar M.; Seong, Je Kyung; Trusolino, Livio; Vinolo, Emilie; Wechsler-Reya, Robert J.; Weinstock, David M.; Welm, Alana; Weroha, S. John; Amant, Frédéric; Pfister, Stefan M.; Kool, Marcel; Parkinson, Helen; Butte, Atul J.; Bult, Carol J.

2017-01-01

Patient-derived tumor xenograft (PDX) mouse models have emerged as an important oncology research platform to study tumor evolution, mechanisms of drug response and resistance, and tailoring chemotherapeutic approaches for individual patients. The lack of robust standards for reporting on PDX models

Analysis of standard substance human hair

International Nuclear Information System (INIS)

Zou Shuyun; Zhang Yongbao

2005-01-01

The human hair samples as standard substances were analyzed by the neutron activation analysis (NAA) on the miniature neutron source reactor. 19 elements, i.e. Al, As, Ba, Br, Ca, Cl, Cr, Co, Cu, Fe, Hg, I, Mg, Mn, Na, S, Se, V and Zn, were measured. The average content, standard deviation, relative standard deviation and the detection limit under the present research conditions were given for each element, and the results showed that the measured values of the samples were in agreement with the recommended values, which indicated that NAA can be used to analyze standard substance human hair with a relatively high accuracy. (authors)

A Comparison between Standard and Functional Clustering Methodologies: Application to Agricultural Fields for Yield Pattern Assessment

Directory of Open Access Journals (Sweden)

Simone Pascucci

2018-04-01

Full Text Available The recognition of spatial patterns within agricultural fields, presenting similar yield potential areas, stable through time, is very important for optimizing agricultural practices. This study proposes the evaluation of different clustering methodologies applied to multispectral satellite time series for retrieving temporally stable (constant patterns in agricultural fields, related to within-field yield spatial distribution. The ability of different clustering procedures for the recognition and mapping of constant patterns in fields of cereal crops was assessed. Crop vigor patterns, considered to be related to soils characteristics, and possibly indicative of yield potential, were derived by applying the different clustering algorithms to time series of Landsat images acquired on 94 agricultural fields near Rome (Italy. Two different approaches were applied and validated using Landsat 7 and 8 archived imagery. The first approach automatically extracts and calculates for each field of interest (FOI the Normalized Difference Vegetation Index (NDVI, then exploits the standard K-means clustering algorithm to derive constant patterns at the field level. The second approach applies novel clustering procedures directly to spectral reflectance time series, in particular: (1 standard K-means; (2 functional K-means; (3 multivariate functional principal components clustering analysis; (4 hierarchical clustering. The different approaches were validated through cluster accuracy estimates on a reference set of FOIs for which yield maps were available for some years. Results show that multivariate functional principal components clustering, with an a priori determination of the optimal number of classes for each FOI, provides a better accuracy than those of standard clustering algorithms. The proposed novel functional clustering methodologies are effective and efficient for constant pattern retrieval and can be used for a sustainable management of

PATELLOFEMORAL MODEL OF THE KNEE JOINT UNDER NON-STANDARD SQUATTING

OpenAIRE

FEKETE, GUSZTÁV; CSIZMADIA, BÉLA MÁLNÁSI; WAHAB, MAGD ABDEL; DE BAETS, PATRICK; VANEGAS-USECHE, LIBARDO V.; BÍRÓ, ISTVÁN

2014-01-01

The available analytical models for calculating knee patellofemoral forces are limited to the standard squat motion when the center of gravity is fixed horizontally. In this paper, an analytical model is presented to calculate accurately patellofemoral forces by taking into account the change in position of the trunk's center of gravity under deep squat (non-standard squatting). The accuracy of the derived model is validated through comparisons with results of the inverse dynamics technique. ...

Status and trends in IAEA safety standards

International Nuclear Information System (INIS)

Lipar, M.

2004-01-01

While safety is a national responsibility, international standards and approaches to safety promote consistency and facilitate international technical co-operation and trade, and help to provide assurance that nuclear and radiation related technologies are used safely. The standards also provide support for States in meeting their international obligations. One general international obligation is that a State must not pursue activities that cause damage in another State. More specific obligations on Contracting States are set out in international safety related conventions. The internationally agreed IAEA safety standards provide the basis for States to demonstrate that they are meeting these obligations. These standards are founded in the IAEA's Statute, which authorizes the Agency to establish standards of safety for nuclear and radiation related facilities and activities and to provide for their application. The safety standards reflect an international consensus on what constitutes a high level of safety for protecting people and the environment. (orig.) [de

Towards LHC physics with nonlocal Standard Model

Energy Technology Data Exchange (ETDEWEB)

Biswas, Tirthabir, E-mail: tbiswas@loyno.edu [Department of Physics, Loyola University, 6363 St. Charles Avenue, Box 92, New Orleans, LA 70118 (United States); Okada, Nobuchika, E-mail: okadan@ua.edu [Department of Physics and Astronomy, University of Alabama, Tuscaloosa, AL 35487-0324 (United States)

2015-09-15

We take a few steps towards constructing a string-inspired nonlocal extension of the Standard Model. We start by illustrating how quantum loop calculations can be performed in nonlocal scalar field theory. In particular, we show the potential to address the hierarchy problem in the nonlocal framework. Next, we construct a nonlocal abelian gauge model and derive modifications of the gauge interaction vertex and field propagators. We apply the modifications to a toy version of the nonlocal Standard Model and investigate collider phenomenology. We find the lower bound on the scale of nonlocality from the 8 TeV LHC data to be 2.5–3 TeV.

Efficiency calibration of electron spectrometers by the help of standard spectrum

International Nuclear Information System (INIS)

Toth, J.; Cserny, I.; Varga, D.; Koever, I.; Toekesi, K.

2004-01-01

Complete text of publication follows. For studying thin films and surface nanostructures quantitative analytical applications of electron spectroscopic techniques have a great importance. The most frequently used techniques are XPS, XAES and AES in quantitative surface electron spectroscopy. Applying these techniques changes in the detection efficiency vs. electron kinetic energy change the measured electron peak intensity ratios and in this way the neglect of the energy dependence of the spectrometer efficiency can influence surface atomic concentrations derived. The importance of the precise determination of the atomic concentrations is very crucial, especially in the determination of non-destructive depth profiles by the help of AR-XPS in which small changes in the relative concentrations can change dramatically the concentration depth profiles of a few nanometer depth ranges. In the present study the REELS technique was used to determine the relative detection efficiency by the help of a standard spectrum measured on the surface of fine microcrystalline Cu specimen. The experimental relative efficiency curves vs. electron kinetic energy were compared to the calculated efficiency curve. The efficiency calibration is discussed from the point of view of quantitative XPS, AR- XPS, AES and from the point of view of IMFP determination by XPS. The work was supported by the Hungarian National Science Foundation, OTKAT038016. For the Cu specimen and the standard spectrum the authors are indebted to the Sur- face Analysis Society of Japan, to Dr. Shigeo Tanuma and Professor Keisuke Goto (NIT). (author)

A lower limit to the accretion disc radius in the low-luminosity AGN NGC 1052 derived from high-angular resolution data

Science.gov (United States)

Reb, Lennart; Fernández-Ontiveros, Juan A.; Prieto, M. Almudena; Dolag, Klaus

2018-05-01

We investigate the central sub-arcsec region of the low-luminosity active galactic nucleus NGC 1052, using a high-angular resolution dataset that covers 10 orders of magnitude in frequency. This allows us to infer the continuum emission within the innermost ˜17 pc around the black hole to be of non-thermal, synchrotron origin and to set a limit to the maximum contribution of a standard accretion disc. Assuming the canonical 10 per cent mass-light conversion efficiency for the standard accretion disc, its inferred accretion power would be too low by one order of magnitude to account for the observed continuum luminosity. We thus introduce a truncated accretion disc and derive a truncation radius to mass-light conversion efficiency relation, which we use to reconcile the inferred accretion power with the continuum luminosity. As a result we find that a truncated disc providing the necessary accretion power must be truncated at rtr ≳ 26 rg, consistent with the inner radius derived from the observations of the Fe Kα line in the X-ray spectrum of this nucleus. This is the first time to derive a limit on the truncation radius of the accretion disc from high-angular resolution data only.

[Development of a software standardizing optical density with operation settings related to several limitations].

Science.gov (United States)

Tu, Xiao-Ming; Zhang, Zuo-Heng; Wan, Cheng; Zheng, Yu; Xu, Jin-Mei; Zhang, Yuan-Yuan; Luo, Jian-Ping; Wu, Hai-Wei

2012-12-01

To develop a software that can be used to standardize optical density to normalize the procedures and results of standardization in order to effectively solve several problems generated during standardization of in-direct ELISA results. The software was designed based on the I-STOD method with operation settings to solve the problems that one might encounter during the standardization. Matlab GUI was used as a tool for the development. The software was tested with the results of the detection of sera of persons from schistosomiasis japonica endemic areas. I-STOD V1.0 (WINDOWS XP/WIN 7, 0.5 GB) was successfully developed to standardize optical density. A serial of serum samples from schistosomiasis japonica endemic areas were used to examine the operational effects of I-STOD V1.0 software. The results indicated that the software successfully overcame several problems including reliability of standard curve, applicable scope of samples and determination of dilution for samples outside the scope, so that I-STOD was performed more conveniently and the results of standardization were more consistent. I-STOD V1.0 is a professional software based on I-STOD. It can be easily operated and can effectively standardize the testing results of in-direct ELISA.

Standard molar enthalpies of formation of monochloroacetophenone isomers

Energy Technology Data Exchange (ETDEWEB)

Ribeiro da Silva, Manuel A.V., E-mail: risilva@fc.up.p [Centro de Investigacao em Quimica, Department of Chemistry and Biochemistry, Faculty of Science, University of Porto, Rua do Campo Alegre, 687, P-4169-007 Porto (Portugal); Amaral, Luisa M.P.F. [Centro de Investigacao em Quimica, Department of Chemistry and Biochemistry, Faculty of Science, University of Porto, Rua do Campo Alegre, 687, P-4169-007 Porto (Portugal)

2010-12-15

The standard (p{sup 0}=0.1MPa) molar enthalpies of formation of the liquids 2'-, 3'-, and 4'-chloroacetophenones were derived from the standard molar energies of combustion, in oxygen, to yield CO{sub 2}(g) and HCl . 600H{sub 2}O(l), at T = 298.15 K, measured by rotating-bomb combustion calorimetry. The Calvet microcalorimetry was used to measure the enthalpies of vaporization of the three compounds. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the chloroacetophenone isomers, in the gaseous phase, at T = 298.15 K. (table) An empirical scheme, developed by Cox, was used to estimate the gas-phase enthalpies of formation and the obtained values were compared with the experimental ones.

Public relations: a re-examination of definition, role, and function based on community relations of the Standard Oil (Indiana) refinery at Sugar Creek, MO

Energy Technology Data Exchange (ETDEWEB)

Kruckeberg, D.A.

1985-01-01

This study describes public relations as it is commonly practiced today as: a vocation utilizing persuasive communication to obtain a vested nonmarketing goal on behalf of a represented client. It argues that public relation is better defined and practiced as: the active attempt to restore/maintain a sense of community. To illustrate what this dissertation advocates, a case study is used. Probably no organization had designed a community relations program with the specific and express purpose of fostering a sense of community, at least to the extent this dissertation calls for. However, the Standard Oil Company (Indiana) refinery at Sugar Creek, MO, has done this sufficiently to merit study. Based on the findings of the case study, which covers a 75-year period of time, specific recommendations are made in practicing public relations as advocated in this dissertation: the active attempt to restore/maintain a sense of community. The theoretical basis comes from the writings of the Chicago School of Social Thought. It is demonstrated that the Chicago School can provide an excellent theoretical basis to provide insight into public relations practice from a perspective that eliminates the problems that now exist in the role and function of public relations.

29 CFR 1960.16 - Compliance with OSHA standards.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Compliance with OSHA standards. 1960.16 Section 1960.16 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... PROGRAMS AND RELATED MATTERS Standards § 1960.16 Compliance with OSHA standards. Each agency head shall...

Environmental radiation protection standards

International Nuclear Information System (INIS)

Richings, L.D.G.; Morley, F.; Kelley, G.N.

1978-04-01

The principles involved in the setting of radiological protection standards are reviewed, and the differences in procedures used by various countries in implementing them are outlined. Standards are taken here to mean the specific numerical limits relating to radiation doses to people or to amounts of radioactive material released into the environment. (author)

Deriving the largest expected number of elementary particles in the standard model from the maximal compact subgroup H of the exceptional Lie group E7(-5)

International Nuclear Information System (INIS)

El Naschie, M.S.

2008-01-01

The maximal number of elementary particles which could be expected to be found within a modestly extended energy scale of the standard model was found using various methods to be N = 69. In particular using E-infinity theory the present Author found the exact transfinite expectation value to be =α-bar o /2≅69 where α-bar o =137.082039325 is the exact inverse fine structure constant. In the present work we show among other things how to derive the exact integer value 69 from the exceptional Lie symmetry groups hierarchy. It is found that the relevant number is given by dim H = 69 where H is the maximal compact subspace of E 7(-5) so that N = dim H = 69 while dim E 7 = 133

Toward a technology of derived stimulus relations: an analysis of articles published in the journal of applied behavior analysis, 1992-2009.

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the Journal of Applied Behavior Analysis was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure (automated vs. tabletop), stimuli, and stimulus sensory modality; types of relations targeted and emergent skills demonstrated by participants; and presence versus absence of evaluation of generalization and maintenance. In most respects, published reports suggested the possibility of applied technologies but left the difficult work of technology development to future investigations, suggestions for which are provided.

Investigative study of standards for Digital Repositories and related services

NARCIS (Netherlands)

Foulonneau, Muriel; André, Francis

2007-01-01

This study is meant for institutional repository managers, service providers, repository software developers and generally, all players taking an active part in the creation of the digital repository infrastructure for e-research and e-learning. It reviews the current standards, protocols and

Multiscale analysis of the CMB temperature derivatives

Energy Technology Data Exchange (ETDEWEB)

Marcos-Caballero, A.; Martínez-González, E.; Vielva, P., E-mail: marcos@ifca.unican.es, E-mail: martinez@ifca.unican.es, E-mail: vielva@ifca.unican.es [Instituto de Física de Cantabria, CSIC-Universidad de Cantabria, Avda. de los Castros s/n, 39005 Santander, Spain. (Spain)

2017-02-01

We study the Planck CMB temperature at different scales through its derivatives up to second order, which allows one to characterize the local shape and isotropy of the field. The problem of having an incomplete sky in the calculation and statistical characterization of the derivatives is addressed in the paper. The analysis confirms the existence of a low variance in the CMB at large scales, which is also noticeable in the derivatives. Moreover, deviations from the standard model in the gradient, curvature and the eccentricity tensor are studied in terms of extreme values on the data. As it is expected, the Cold Spot is detected as one of the most prominent peaks in terms of curvature, but additionally, when the information of the temperature and its Laplacian are combined, another feature with similar probability at the scale of 10{sup o} is also observed. However, the p -value of these two deviations increase above the 6% when they are referred to the variance calculated from the theoretical fiducial model, indicating that these deviations can be associated to the low variance anomaly. Finally, an estimator of the directional anisotropy for spinorial quantities is introduced, which is applied to the spinors derived from the field derivatives. An anisotropic direction whose probability is <1% is detected in the eccentricity tensor.

Wilson Loop and related strings for the instanton and their variational derivatives

International Nuclear Information System (INIS)

Bollini, C.G.; Giambiagi, J.J.; Tiomno, J.

1980-05-01

Ordered integrals along arcs (or circles) and segments for the instanton are computed. They are to obtain variational and partial derivatives for open an d closed strings. The D'Alembertian for wilson loops is also computed. (Author) [pt

Neural activity in relation to clinically derived personality syndromes in depression using a psychodynamic fMRI paradigm

Directory of Open Access Journals (Sweden)

Svenja eTaubner

2013-12-01

Full Text Available Objective: The heterogeneity between patients with depression cannot be captured adequately with existing descriptive systems of diagnosis and neurobiological models of depression. Furthermore, considering the highly individual nature of depression, the application of general stimuli in past research efforts may not capture the essence of the disorder. This study aims to identify subtypes of depression by using empirically-derived personality-syndromes, and to explore neural correlates of the derived personality syndromes.Method: In the present exploratory study an individually tailored and psychodynamically based fMRI paradigm using dysfunctional relationship patterns was presented to 20 chronically depressed patients. Results from the Shedler-Westen-Assessment-Procedure (SWAP-200 were analyzed by Q-factor analysis to identify clinically relevant subgroups of depression and related brain activation.Results: The principle component analysis of SWAP-200 items from all 20 patients lead to a 2-factor solution: Depressive Personality and Emotional-Hostile-Externalizing Personality. Both factors were used in a whole-brain correlational analysis but only the second factor yielded significant positive correlations in four regions: A large cluster in the right orbitofrontal cortex (OFC, the left ventral striatum, a small cluster in the left temporal pole and another small cluster in the right middle frontal gyrus. Discussion: The degree to which patients with depression score high on the factor Emotional-Hostile-Externalizing Personality correlated with relatively higher activity in three key areas involved in emotion processing, evaluation of reward/punishment, negative cognitions, depressive pathology and social knowledge (OFC, ventral striatum, temporal pole. Results may contribute to an alternative description of neural correlates of depression showing differential brain activation dependent on the extent of specific personality syndromes in

Characterization of the NIST shellfish Standard Reference Material 4358

International Nuclear Information System (INIS)

Nour, S.; Inn, K.G.W.; Filliben, J.; Gaast van der, H.; Men, L.C.; Calmet, D.; Altzitzoglou, T.; Povinec, P.; Takata, Y.; Wisdom, M.

2013-01-01

A new shellfish Standard Reference Material 4358 was developed by the National Institute of Standards and Technology through an international interlaboratory comparison that involved twelve laboratories-participants from nine countries. The results from the participants were statistically evaluated, and the most robust certified values were based on the median of laboratories’ reported means and the uncertainties derived using the bootstrap method. Massic activity certified values were established for fourteen radionuclides, five activity ratios, and informational massic activity values for eight more radionuclides and two activity ratios. (author)

The Council on Accreditation of Park, Recreation, Tourism, and Related Professions: 2013 Standards-- The Importance of Outcome-Based Assessment and the Connection to Student Learning

Science.gov (United States)

Blazey, Michael A.

2014-01-01

The Council for Higher Education Accreditation (CHEA) adopted recognition standards in 2006 requiring regional and professional accreditors such as the Council on Accreditation of Park, Recreation, Tourism, and Related Professions (COAPRT) to adopt standards and practices advancing academic quality, demonstrating accountability, and encouraging…

21 CFR 172.275 - Synthetic paraffin and succinic derivatives.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Synthetic paraffin and succinic derivatives. 172... FOOD FOR HUMAN CONSUMPTION Coatings, Films and Related Substances § 172.275 Synthetic paraffin and succinic derivatives. Synthetic paraffin and succinic derivatives identified in this section may be safely...

Standard electrode potential, Tafel equation, and the solvation thermodynamics.

Science.gov (United States)

Matyushov, Dmitry V

2009-06-21

Equilibrium in the electronic subsystem across the solution-metal interface is considered to connect the standard electrode potential to the statistics of localized electronic states in solution. We argue that a correct derivation of the Nernst equation for the electrode potential requires a careful separation of the relevant time scales. An equation for the standard metal potential is derived linking it to the thermodynamics of solvation. The Anderson-Newns model for electronic delocalization between the solution and the electrode is combined with a bilinear model of solute-solvent coupling introducing nonlinear solvation into the theory of heterogeneous electron transfer. We therefore are capable of addressing the question of how nonlinear solvation affects electrochemical observables. The transfer coefficient of electrode kinetics is shown to be equal to the derivative of the free energy, or generalized force, required to shift the unoccupied electronic level in the bulk. The transfer coefficient thus directly quantifies the extent of nonlinear solvation of the redox couple. The current model allows the transfer coefficient to deviate from the value of 0.5 of the linear solvation models at zero electrode overpotential. The electrode current curves become asymmetric in respect to the change in the sign of the electrode overpotential.

Introducing Distance and Measurement in General Relativity: Changes for the Standard Tests and the Cosmological Large-Scale

Directory of Open Access Journals (Sweden)

Crothers S. J.

2005-10-01

Full Text Available Relativistic motion in the gravitational field of a massive body is governed by the external metric of a spherically symmetric extended object. Consequently, any solution for the point-mass is inadequate for the treatment of such motions since it pertains to a fictitious object. I therefore develop herein the physics of the standard tests of General Relativity by means of the generalised solution for the field external to a sphere of incompressible homogeneous fluid.

Uncertainty and minimum detectable concentrations using relative, absolute and K*0-IAEA standardization for the INAA laboratory of the ETRR-2

International Nuclear Information System (INIS)

Khalil, M. Y.

2006-01-01

Full text: The Instrumental Neutron Activation Analysis (INAA) Laboratory of Egypt Second Training and Research Reactor (ETRR-2) is increasingly requested to perform multi-element analysis to large number of samples from different origins. The INAA laboratory has to demonstrate competence by conforming to appropriate internationally and nationally accepted standards. The objective of this work is to determine the uncertainty budget and sensitivity of the INAA laboratory measurements. Concentrations of 9 elements; Mn, Na, K, Ca, Co, Cr, Fe, Rb, and Cs, were measured against a certified test sample. Relative, absolute, and Ko-IAEA standardization methods were employed and results compared. The flux was monitored using cadmium covered gold method, and multifoil (gold, nickel and zirconium) method. The combined and expanded uncertainties were estimated. Uncertainty of concentrations ranged between 2-21% depending on the standardization method used. The relative method, giving the lowest uncertainty, produced uncertainty budget between 2 and 11%. The minimum detectable concentration was the lowest for Cs ranging between 0.36 and 0.59 ppb and the highest being for K in the range of 0.32 to 8.64 ppm

Abnormal brain activation and connectivity to standardized disorder-related visual scenes in social anxiety disorder.

Science.gov (United States)

Heitmann, Carina Yvonne; Feldker, Katharina; Neumeister, Paula; Zepp, Britta Maria; Peterburs, Jutta; Zwitserlood, Pienie; Straube, Thomas

2016-04-01

Our understanding of altered emotional processing in social anxiety disorder (SAD) is hampered by a heterogeneity of findings, which is probably due to the vastly different methods and materials used so far. This is why the present functional magnetic resonance imaging (fMRI) study investigated immediate disorder-related threat processing in 30 SAD patients and 30 healthy controls (HC) with a novel, standardized set of highly ecologically valid, disorder-related complex visual scenes. SAD patients rated disorder-related as compared with neutral scenes as more unpleasant, arousing and anxiety-inducing than HC. On the neural level, disorder-related as compared with neutral scenes evoked differential responses in SAD patients in a widespread emotion processing network including (para-)limbic structures (e.g. amygdala, insula, thalamus, globus pallidus) and cortical regions (e.g. dorsomedial prefrontal cortex (dmPFC), posterior cingulate cortex (PCC), and precuneus). Functional connectivity analysis yielded an altered interplay between PCC/precuneus and paralimbic (insula) as well as cortical regions (dmPFC, precuneus) in SAD patients, which emphasizes a central role for PCC/precuneus in disorder-related scene processing. Hyperconnectivity of globus pallidus with amygdala, anterior cingulate cortex (ACC) and medial prefrontal cortex (mPFC) additionally underlines the relevance of this region in socially anxious threat processing. Our findings stress the importance of specific disorder-related stimuli for the investigation of altered emotion processing in SAD. Disorder-related threat processing in SAD reveals anomalies at multiple stages of emotion processing which may be linked to increased anxiety and to dysfunctionally elevated levels of self-referential processing reported in previous studies. © 2016 Wiley Periodicals, Inc.

Trace Dynamics and a non-commutative special relativity

International Nuclear Information System (INIS)

Lochan, Kinjalk; Singh, T.P.

2011-01-01

Trace Dynamics is a classical dynamical theory of non-commuting matrices in which cyclic permutation inside a trace is used to define the derivative with respect to an operator. We use the methods of Trace Dynamics to construct a non-commutative special relativity. We define a line-element using the Trace over space-time coordinates which are assumed to be operators. The line-element is shown to be invariant under standard Lorentz transformations, and is used to construct a non-commutative relativistic dynamics. The eventual motivation for constructing such a non-commutative relativity is to relate the statistical thermodynamics of this classical theory to quantum mechanics. -- Highlights: → Classical time is external to quantum mechanics. → This implies need for a formulation of quantum theory without classical time. → A starting point could be a non-commutative special relativity. → Such a relativity is developed here using the theory of Trace Dynamics. → A line-element is defined using the Trace over non-commuting space-time operators.

Constraints on Nc in extensions of the standard model

International Nuclear Information System (INIS)

Shrock, Robert

2007-01-01

We consider a class of theories involving an extension of the standard model gauge group to an a priori arbitrary number of colors, N c , and derive constraints on N c . One motivation for this is the string theory landscape. For two natural classes of embeddings of this N c -extended standard model in a supersymmetric grand unified theory, we show that requiring unbroken electromagnetic gauge invariance, asymptotic freedom of color, and three generations of quarks and leptons forces one to choose N c =3. Similarly, we show that for a theory combining the N c -extended standard model with a one-family SU(2) TC technicolor theory, only the value N c =3 is allowed

General philosophy of safety standards

International Nuclear Information System (INIS)

Dunster, H.J.

1987-01-01

Safety standards should be related to the form and magnitude of the risk they aim to limit. Because of the lack of direct information at the exposure levels experienced, radiation protection standards have to be based on risk assumptions that, while plausible, are not proven. The pressure for standards has come as much from public perceptions and fears as from the reality of the risk. (author)

A relative permeability model to derive fractional-flow functions of water-alternating-gas and surfactant-alternating-gas foam core-floods

International Nuclear Information System (INIS)

Al-Mossawy, Mohammed Idrees; Demiral, Birol; Raja, D M Anwar

2013-01-01

Foam is used in enhanced oil recovery to improve the sweep efficiency by controlling the gas mobility. The surfactant-alternating-gas (SAG) foam process is used as an alternative to the water-alternating-gas (WAG) injection. In the WAG technique, the high mobility and the low density of the gas lead the gas to flow in channels through the high permeability zones of the reservoir and to rise to the top of the reservoir by gravity segregation. As a result, the sweep efficiency decreases and there will be more residual oil in the reservoir. The foam can trap the gas in liquid films and reduces the gas mobility. The fractional-flow method describes the physics of immiscible displacements in porous media. Finding the water fractional flow theoretically or experimentally as a function of the water saturation represents the heart of this method. The relative permeability function is the conventional way to derive the fractional-flow function. This study presents an improved relative permeability model to derive the fractional-flow functions for WAG and SAG foam core-floods. The SAG flow regimes are characterized into weak foam, strong foam without a shock front and strong foam with a shock front. (paper)

Some reduce facilities for pretty printing subscripts and formal derivatives

NARCIS (Netherlands)

Hulshof, B.J.A.; van Hulzen, J.A.

1983-01-01

Some REDUCE facilities are presented for pretty printing formal (partial) derivatives, for array-and matrix subcripts and for operators with arbitrary arguments. The package is completely written in Standard LISP and can be considered as an addition to the output repertoire of the algebraic mode of

Cost-Effectiveness Analysis of 1-Year Treatment with Golimumab/Standard Care and Standard Care Alone for Ulcerative Colitis in Poland.

Directory of Open Access Journals (Sweden)

Ewa Stawowczyk

Full Text Available The objective of this study was to assess the cost-effectiveness of induction and maintenance treatment up to 1 year of ulcerative colitis with golimumab/standard care and standard care alone in Poland.A Markov model was used to estimate the expected costs and effects of golimumab/standard care and a standard care alone. For each treatment option the costs and quality adjusted life years were calculated to estimate the incremental cost-utility ratio. The analysis was performed from the perspective of the Polish public payer and society over a 30-years time horizon. The clinical parameters were derived mainly from the PURSUIT-SC and PURSUIT-M clinical trials. Different direct and indirect costs and utility values were assigned to the various model health states.The treatment of ulcerative colitis patients with golimumab/standard care instead of a standard care alone resulted in 0.122 additional years of life with full health. The treatment with golimumab/standard care was found to be more expensive than treatment with the standard care alone from the public payer perspective and from social perspective. The incremental cost-utility ratio of golimumab/standard care compared to the standard care alone is estimated to be 391,252 PLN/QALY gained (93,155 €/QALYG from public payer perspective and 374,377 PLN/QALY gained (89,137 €/QALYG from social perspective.The biologic treatment of ulcerative colitis patients with golimumab/standard care is more effective but also more costly compared with standard care alone.

Standard Terminology Relating to Wear and Erosion

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 The terms and their definitions given herein represent terminology relating to wear and erosion of solid bodies due to mechanical interactions such as occur with cavitation, impingement by liquid jets or drops or by solid particles, or relative motion against contacting solid surfaces or fluids. This scope interfaces with but generally excludes those processes where material loss is wholly or principally due to chemical action and other related technical fields as, for instance, lubrication. 1.2 This terminology is not exhaustive; the absence of any particular term from this collection does not necessarily imply that its use within this scope is discouraged. However, the terms given herein are the recommended terms for the concepts they represent unless otherwise noted. 1.3 Certain general terms and definitions may be restricted and interpreted, if necessary, to make them particularly applicable to the scope as defined herein. 1.4 The purpose of this terminology is to encourage uniformity and accuracy ...

Obesity-related chronic kidney disease is associated with spleen-derived IL-10.

Science.gov (United States)

Gotoh, Koro; Inoue, Megumi; Masaki, Takayuki; Chiba, Seiichi; Shiraishi, Kentaro; Shimasaki, Takanobu; Matsuoka, Kazue; Ando, Hisae; Fujiwara, Kansuke; Fukunaga, Naoya; Aoki, Kohei; Nawata, Tomoko; Katsuragi, Isao; Kakuma, Tetsuya; Seike, Masataka; Yoshimatsu, Hironobu

2013-05-01

Obesity is associated with systemic low-grade inflammation and is a risk factor for chronic kidney disease (CKD), but the molecular mechanism remains uncertain. We noticed spleen-derived interleukin (IL)-10 because it is observed that obesity reduces several cytokines in the spleen. We examined whether spleen-derived IL-10 regulates CKD caused by a high-fat diet (HF)-induced obesity as follows: (i) male mice were fed with HF (60% fat) during 8 weeks and IL-10 induction from the spleen was examined, (ii) glomerular hypertrophy, fibrosis, inflammatory responses in the kidney and systolic blood pressure (SBP) were evaluated in splenectomy (SPX)-treated mice fed HF, (iii) exogenous IL-10 was systemically administered to HF-induced obese mice and the alteration of obesity-induced pathogenesis caused by IL-10 treatment was assessed. (iv) IL-10 knockout (IL-10KO) mice were treated with SPX and glomerular hypertrophy, fibrosis and the inflammatory condition in the kidney and SBP were also investigated. Obesity decreased serum levels of only IL-10, an anti-inflammatory cytokine even though pro- and anti-inflammatory cytokine expression in the spleen was significantly lower in the obese group. SPX aggravated HF-induced inflammatory responses in the kidney and hypertension. These HF-induced alterations were inhibited by systemically administered IL-10. Moreover, SPX had little effect on inflammatory responses and SBP in the kidney of IL-10KO mice. We suggest that obesity reduces IL-10 induction from the spleen, and spleen-derived IL-10 may protect against the development of CKD induced by obesity.

Derived crop management data for the LandCarbon Project

Science.gov (United States)

Schmidt, Gail; Liu, Shu-Guang; Oeding, Jennifer

2011-01-01

The LandCarbon project is assessing potential carbon pools and greenhouse gas fluxes under various scenarios and land management regimes to provide information to support the formulation of policies governing climate change mitigation, adaptation and land management strategies. The project is unique in that spatially explicit maps of annual land cover and land-use change are created at the 250-meter pixel resolution. The project uses vast amounts of data as input to the models, including satellite, climate, land cover, soil, and land management data. Management data have been obtained from the U.S. Department of Agriculture (USDA) National Agricultural Statistics Service (NASS) and USDA Economic Research Service (ERS) that provides information regarding crop type, crop harvesting, manure, fertilizer, tillage, and cover crop (U.S. Department of Agriculture, 2011a, b, c). The LandCarbon team queried the USDA databases to pull historic crop-related management data relative to the needs of the project. The data obtained was in table form with the County or State Federal Information Processing Standard (FIPS) and the year as the primary and secondary keys. Future projections were generated for the A1B, A2, B1, and B2 Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) scenarios using the historic data values along with coefficients generated by the project. The PBL Netherlands Environmental Assessment Agency (PBL) Integrated Model to Assess the Global Environment (IMAGE) modeling framework (Integrated Model to Assess the Global Environment, 2006) was used to develop coefficients for each IPCC SRES scenario, which were applied to the historic management data to produce future land management practice projections. The LandCarbon project developed algorithms for deriving gridded data, using these tabular management data products as input. The derived gridded crop type, crop harvesting, manure, fertilizer, tillage, and cover crop

A computer program for deriving soil cleanup criteria

International Nuclear Information System (INIS)

Yu, C.

1990-01-01

The US Department of Energy (DOE) has issued a new order, DOE Order 5400.5, for Radiation Protection of the Public and the Environment. In this order, the DOE sets forth radiological protection guidelines for the cleanup of residual radioactive materials. Radionuclide concentrations and radioactivity levels have been established that are acceptable if a site is to be used without radiological restrictions. The guidelines can be categorized as either generic (site independent), that is, taken from existing radiation protection standards, or site specific, that is, derived from the basic dose limit using site-specific data and models. The generic guidelines for soil concentrations of 226 Ra, 228 Ra, 230 Th, and 232 Th adopted in DOE Order 5400.5 are generally consistent with US Environmental Protection Agency standards in Title 40, Code of Federal Regulations, Part 192. Procedures and data for deriving site-specific guidelines for other radionuclides in soil have been coded in a microcomputer program called RESRAD. The RESRAD code has been used by the DOE and its contractors to calculate postremediation doses and cleanup guidelines. The RESRAD code is a useful, easy to run, and very user-friendly tool

The standard model on non-commutative space-time

International Nuclear Information System (INIS)

Calmet, X.; Jurco, B.; Schupp, P.; Wohlgenannt, M.; Wess, J.

2002-01-01

We consider the standard model on a non-commutative space and expand the action in the non-commutativity parameter θ μν . No new particles are introduced; the structure group is SU(3) x SU(2) x U(1). We derive the leading order action. At zeroth order the action coincides with the ordinary standard model. At leading order in θ μν we find new vertices which are absent in the standard model on commutative space-time. The most striking features are couplings between quarks, gluons and electroweak bosons and many new vertices in the charged and neutral currents. We find that parity is violated in non-commutative QCD. The Higgs mechanism can be applied. QED is not deformed in the minimal version of the NCSM to the order considered. (orig.)

ARM Data File Standards Version: 1.0

Energy Technology Data Exchange (ETDEWEB)

Kehoe, Kenneth [University of Oklahoma; Beus, Sherman [Pacific Northwest National Laboratory; Cialella, Alice [Brookhaven National Laboratory; Collis, Scott [Argonne National Laboratory; Ermold, Brian [Pacific Northwest National Laboratory; Perez, Robin [State University of New York, Albany; Shamblin, Stefanie [Oak Ridge National Laboratory; Sivaraman, Chitra [Pacific Northwest National Laboratory; Jensen, Mike [Brookhaven National Laboratory; McCord, Raymond [Oak Ridge National Laboratory; McCoy, Renata [Sandia National Laboratories; Moore, Sean [Alliant Techsystems, Inc.; Monroe, Justin [University of Oklahoma; Perkins, Brad [Los Alamos National Laboratory; Shippert, Tim [Pacific Northwest National Laboratory

2014-04-01

The Atmospheric Radiation Measurement (ARM) Climate Research Facility performs routine in situ and remote-sensing observations to provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes. The result is a diverse data sets containing observational and derived data, currently accumulating at a rate of 30 TB of data and 150,000 different files per month (http://www.archive.arm.gov/stats/storage2.html). Continuing the current processing while scaling this to even larger sizes is extremely important to the ARM Facility and requires consistent metadata and data standards. The standards described in this document will enable development of automated analysis and discovery tools for the ever-growing volumes of data. It also will enable consistent analysis of the multiyear data, allow for development of automated monitoring and data health status tools, and facilitate development of future capabilities for delivering data on demand that can be tailored explicitly to user needs. This analysis ability will only be possible if the data follows a minimum set of standards. This document proposes a hierarchy that includes required and recommended standards.

THE TERMS OF INHERITANCE LAW IN RUSSIA-BYZANTIUM TREATIES AND RUSSKAYA PRAVDA: THE PROBLEMS OF FUNCTIONAL SEMANTICS AND DERIVATION RELATIONS

Directory of Open Access Journals (Sweden)

Kirzhaeva Vera Petrovna

2014-12-01

Full Text Available The article deals with the functional-and-semantic and derivational relations of the inheritance law terms in the Russia-Byzantium treaties and in Russkaya Pravda Legal Code as well as in the wide-spread Church Slavonic law regulators that appeared in Rus after adoption of Christianity. The research results attest that the inheritance law terminology in treaties includes designation of inheritance, will and heirs. There is a special term chast ('part' that denotes a share of inheritance in the Russkaya Pravda and Church Slavonic legal texts. However, chast as a 'part' (share is a characteristic of the Russkaya Pravda legal texts only. In Church Slavonic it is used in treaties for nominating the property in general. A similar lack of strict distribution between inheritance law terms zadnitsa and dom, presented in Old Russian texts, was noted in Church Slavonic treaties. Various derivatives of the root *rÌd- are used to denote the will in all texts under analysis; the terms pisati employed only in treaties and church law regulators to denote a written will or procedures of its preparation. The derivatives of the root *bliz- nominate the heirs in both text systems. A loan translation of the terminological word group malye / milye blizhnie / blizhiki dated to the year 911 is not viewed as a translators' experiment with the Greek terms, because it reflects a steady lexical distribution of adjectives malye / milye and the terms of relations in the Russian language. The results of the study testify some inheritance law terms correlation between Russia-Byzantium treaties, Russkaya Pravda and Church Slavonic legal texts, their translation in the treaties was not entirely artificial. The Church Slavonic and Old Russian terminological systems were open to these interferences in some ways.

Hepatoma-derived growth factor-related protein-3 is a novel angiogenic factor.

Directory of Open Access Journals (Sweden)

Michelle E LeBlanc

Full Text Available Hepatoma-derived growth factor-related protein-3 (Hdgfrp3 or HRP-3 was recently reported as a neurotrophic factor and is upregulated in hepatocellular carcinoma to promote cancer cell survival. Here we identified HRP-3 as a new endothelial ligand and characterized its in vitro and in vivo functional roles and molecular signaling. We combined open reading frame phage display with multi-round in vivo binding selection to enrich retinal endothelial ligands, which were systematically identified by next generation DNA sequencing. One of the identified endothelial ligands was HRP-3. HRP-3 expression in the retina and brain was characterized by Western blot and immunohistochemistry. Cell proliferation assay showed that HRP-3 stimulated the growth of human umbilical vein endothelial cells (HUVECs. HRP-3 induced tube formation of HUVECs in culture. Wound healing assay indicated that HRP-3 promoted endothelial cell migration. HRP-3 was further confirmed for its in vitro angiogenic activity by spheroid sprouting assay. HRP-3 extrinsically activated the extracellular-signal-regulated kinase ½ (ERK1/2 pathway in endothelial cells. The angiogenic activity of HRP-3 was independently verified by mouse cornea pocket assay. Furthermore, in vivo Matrigel plug assay corroborated HRP-3 activity to promote new blood vessel formation. These results demonstrated that HRP-3 is a novel angiogenic factor.

ITS Standards Advisory : Dynamic Message Signs (DMS)

Science.gov (United States)

2003-01-01

ITS Standards Advisories provide the transportation community with information and guidance on key activities related to ITS standards, with each Advisory focusing on a single ITS application and its corresponding standards. This advisory focuses on ...

Household energy consumption versus income and relative standard of living: A panel approach

International Nuclear Information System (INIS)

Joyeux, Roselyne; Ripple, Ronald D.

2007-01-01

Our fundamental premise is that energy consumption at the household level is a key indicator of standard of living. We employ state-of-the-art panel cointegration techniques to evaluate the nature of the relationship between income measures and energy consumption measures for seven East Indian Ocean countries. The general finding is that income and household electricity consumption are not cointegrated. Given this finding, we conclude that standard of living measures that rely on income measures and do not include household-level energy consumption information will necessarily miss important indications of both levels and changes of standard of living

Global seismic inversion as the next standard step in the processing sequence

Energy Technology Data Exchange (ETDEWEB)

Maver, Kim G.; Hansen, Lars S.; Jepsen, Anne-Marie; Rasmussen, Klaus B.

1998-12-31

Seismic inversion of post stack seismic data has until recently been regarded as a reservoir oriented method since the standard inversion techniques rely on extensive well control and a detailed user derived input model. Most seismic inversion techniques further requires a stable wavelet. As a consequence seismic inversion is mainly utilised in mature areas focusing of specific zones only after the seismic data has been interpreted and is well understood. By using an advanced 3-D global technique, seismic inversion is presented as the next standard step in the processing sequence. The technique is robust towards noise within the seismic data, utilizes a time variant wavelet, and derives a low frequency model utilizing the stacking velocities and only limited well control. 4 figs.

DAG expression: high-throughput gene expression analysis of real-time PCR data using standard curves for relative quantification.

Directory of Open Access Journals (Sweden)

María Ballester

Full Text Available BACKGROUND: Real-time quantitative PCR (qPCR is still the gold-standard technique for gene-expression quantification. Recent technological advances of this method allow for the high-throughput gene-expression analysis, without the limitations of sample space and reagent used. However, non-commercial and user-friendly software for the management and analysis of these data is not available. RESULTS: The recently developed commercial microarrays allow for the drawing of standard curves of multiple assays using the same n-fold diluted samples. Data Analysis Gene (DAG Expression software has been developed to perform high-throughput gene-expression data analysis using standard curves for relative quantification and one or multiple reference genes for sample normalization. We discuss the application of DAG Expression in the analysis of data from an experiment performed with Fluidigm technology, in which 48 genes and 115 samples were measured. Furthermore, the quality of our analysis was tested and compared with other available methods. CONCLUSIONS: DAG Expression is a freely available software that permits the automated analysis and visualization of high-throughput qPCR. A detailed manual and a demo-experiment are provided within the DAG Expression software at http://www.dagexpression.com/dage.zip.

Platelet-, monocyte-derived and tissue factor-carrying circulating microparticles are related to acute myocardial infarction severity.

Directory of Open Access Journals (Sweden)

Gemma Chiva-Blanch

Full Text Available Circulating microparticles (cMPs are phospholipid-rich vesicles released from cells when activated or injured, and contribute to the formation of intracoronary thrombi. Tissue factor (TF, CD142 is the main trigger of fibrin formation and TF-carrying cMPs are considered one of the most procoagulant cMPs. Similar types of atherosclerotic lesions may lead to different types of AMI, although the mechanisms behind are unresolved. Therefore, we aimed to investigate the phenotype of cMPs found in plasma of ACS patients and its relation to AMI severity and thrombotic burden.In a cross-sectional study, two hundred patients aged 75±4 years were included in the study 2-8 weeks after suffering an AMI. Annexin V positive (AV+-cMPs derived from blood and vascular cells were measured by flow cytometry. Plasma procoagulant activity (TF-PCA was measured through a chromogenic assay.STEMI patients (n = 75 showed higher levels of platelet-derived cMPs [CD61+/AV+, CD31+/AV+, CD42b+/AV+ and CD31+/CD42b+/AV+, P = 0.048, 0.038, 0.009 and 0.006, respectively], compared to NSTEMI patients (n = 125. Patients who suffered a heart failure during AMI (n = 17 had increased levels of platelet (CD61+-and monocyte (CD14+-derived cMPs carrying TF (CD142+ (P<0.0001 and 0.004, respectively. Additionally, NYHA class III (n = 23 patients showed higher levels of CD142+/AV+, CD14+/AV+ and CD14+/CD142+/AV+ cMPs than those in class I/II (P = 0.001, 0.015 and 0.014, respectively. The levels of these cMPs positively correlated with TF-PCA (r≥0.166, P≤0.027, all.Platelets and monocytes remain activated in AMI patients treated as per guidelines and release cMPs that discriminate AMI severity. Therefore, TF-MPs, and platelet- and monocyte-MPs may reflect thrombotic burden in AMI patients.

Surface soil contamination standards for Rockwell Hanford Operations

International Nuclear Information System (INIS)

Boothe, G.F.

1981-01-01

The 200 Areas of the Hanford site contain soils contaminated with levels of radioactivity ranging from fallout concentrations to levels requiring radiological controls. Some contamination is more or less uniformly distributed, and some occurs as discrete specks or spots of activity. Because of the acute need for standards, the Rockwell Environmental Protection (EP) Group proceeded to develop standards; these were approved by Rockwell in October 1979. It must be emphasized that these standards are only applicable to the 200 Areas of the Hanford site or other areas under Rockwell's jurisdiction. It is assumed that access to these areas will always be restricted and that land-use restrictions will be maintained. Contamination limits for areas used by the general public would normally be lower than the limits derived in this case. It appears that the Rockwell standards divided by a factor of 5 to 10 may be reasonable contamination guidelines for the general environment

Relation between derived-band auditory brainstem response latencies and behavioral frequency selectivity