Implementation of Online Promethee Method for Poor Family Change Rate Calculation

Science.gov (United States)

Aji, Dhady Lukito; Suryono; Widodo, Catur Edi

2018-02-01

This research has been done online calculation of the rate of poor family change rate by using Preference Ranking Method of Organization Of Enrichment Evaluation (PROMETHEE) .This system is very useful to monitor poverty in a region as well as for administrative services related to poverty rate. The system consists of computer clients and servers connected via the internet network. Poor family residence data obtained from the government. In addition, survey data are inputted through the client computer in each administrative village and also 23 criteria of input in accordance with the established government. The PROMETHEE method is used to evaluate the value of poverty and its weight is used to determine poverty status. PROMETHEE output can also be used to rank the poverty of the registered population of the server based on the netflow value. The poverty rate is calculated based on the current poverty rate compared to the previous poverty rate. The rate results can be viewed online and real time on the server through numbers and graphs. From the test results can be seen that the system can classify poverty status, calculate the poverty rate change rate and can determine the value and poverty ranking of each population.

Measurements of μ capture rates in liquid hydrogen by the lifetime method

International Nuclear Information System (INIS)

Martino, Jacques.

1982-04-01

The μ capture reaction is a weak interaction. It can be observed as a result of the formation of muonic atoms for which the overlopping of the wave functions of the muon and nucleus is a maximum in the 1s state. The production of this (μp) bound state leads to a capture rate in relatively favorable competition with the disintegration rate. The capture rate for a pulsed muon beam (from the Saclay linear accelerator) was measured in liquid hydrogen by the lifetime method. The method and experimental equipment used for the lifetime measurements are described together with the different sources of systematic error and the results obtained. The interpretation of these results is discussed [fr

A New Method to Calculate Internal Rate of Return

Directory of Open Access Journals (Sweden)

azadeh zandi

2015-09-01

Full Text Available A number of methods have been developed to choose the best capital investment projects such as net present value, internal rate of return and etc. Internal rate of return method is probably the most popular method among managers and investors. But despite the popularity there are serious drawbacks and limitations in this method. After decades of efforts made by economists and experts to improve the method and its shortcomings, Magni in 2010 has revealed a new approach that can solves the most of internal rate of return method problems. This paper present a new method which is originated from Magni’s approach but has much more simple calculations and can resolve all the drawbacks of internal rate of return method.

INES rating of radiation protection related events

International Nuclear Information System (INIS)

Hort, M.

2009-01-01

In this presentation, based on the draft Manual, a short review of the use of the INES rating of events concerning radiation protection is given, based on a new INES User's Manual edition. The presentation comprises a brief history of the scale development, general description of the scale and the main principles of the INES rating. Several examples of the use of the scale for radiation protection related events are mentioned. In the presentation, the term 'radiation protection related events' is used for radiation source and transport related events outside the nuclear installations. (authors)

An absolute- and relative-rate study of the gas-phase reaction of OH radicals and Cl atoms with n-alkyl nitrates

DEFF Research Database (Denmark)

Nielsen, O.J.; Sidebottom, H.W.; Donlon, M.

1991-01-01

combined with kinetic spectroscopy and a conventional photolytic relative-rate method. The Cl rate constants were measured using only the relative-rate method. Evidence is presented from the kinetic studies that reaction of OH radicals with alkyl nitrates may involve both addition and abstraction pathways...

Novel Method For Low-Rate Ddos Attack Detection

Science.gov (United States)

Chistokhodova, A. A.; Sidorov, I. D.

2018-05-01

The relevance of the work is associated with an increasing number of advanced types of DDoS attacks, in particular, low-rate HTTP-flood. Last year, the power and complexity of such attacks increased significantly. The article is devoted to the analysis of DDoS attacks detecting methods and their modifications with the purpose of increasing the accuracy of DDoS attack detection. The article details low-rate attacks features in comparison with conventional DDoS attacks. During the analysis, significant shortcomings of the available method for detecting low-rate DDoS attacks were found. Thus, the result of the study is an informal description of a new method for detecting low-rate denial-of-service attacks. The architecture of the stand for approbation of the method is developed. At the current stage of the study, it is possible to improve the efficiency of an already existing method by using a classifier with memory, as well as additional information.

Trends in Suicide Methods and Rates among Older Adults in South Korea: A Comparison with Japan.

Science.gov (United States)

Park, Subin; Lee, Hochang Benjamin; Lee, Su Yeon; Lee, Go Eun; Ahn, Myung Hee; Yi, Ki Kyoung; Hong, Jin Pyo

2016-03-01

Lethality of the chosen method during a suicide attempt is a strong risk factor for completion of suicide. We examined whether annual changes in the pattern of suicide methods is related to annual changes in suicide rates among older adults in South Korea and Japan. We analyzed annual the World Health Organization data on rates and methods of suicide from 2000 to 2011 in South Korea and Japan. For Korean older adults, there was a significant positive correlation between suicide rate and the rate of hanging or the rate of jumping, and a significant negative correlation between suicide rate and the rate of poisoning. Among older adults in Japan, annual changes in the suicide rate and the pattern of suicide methods were less conspicuous, and no correlation was found between them. The results of the present study suggest that the increasing use of lethal suicide methods has contributed to the rise in suicide rates among older adults in South Korea. Targeted efforts to reduce the social acceptability and accessibility of lethal suicide methods might lead to lower suicide rate among older adults in South Korea.

Relative viscosity of emulsions in simple shear flow: Temperature, shear rate, and interfacial tension dependence

Energy Technology Data Exchange (ETDEWEB)

Choi, Se Bin; Lee, Joon Sang [Dept. of Mechanical Engineering, Yonsei Unversity, Seoul (Korea, Republic of)

2015-08-15

We simulate an emulsion system under simple shear rates to analyze its rheological characteristics using the lattice Boltzmann method (LBM). We calculate the relative viscosity of an emulsion under a simple shear flow along with changes in temperature, shear rate, and surfactant concentration. The relative viscosity of emulsions decreased with an increase in temperature. We observed the shear-thinning phenomena, which is responsible for the inverse proportion between the shear rate and viscosity. An increase in the interfacial tension caused a decrease in the relative viscosity of the decane-in-water emulsion because the increased deformation caused by the decreased interfacial tension significantly influenced the wall shear stress.

Sterilization: new method options, failure rate info.

Science.gov (United States)

1998-01-01

This article discusses new sterilization methods for tubal ligation, failure rates, and risks for ectopic pregnancy in the US. The Filshie clip, which was developed by Femcare, Ltd. in Nottingham, England, and is distributed by Avalon Medical Corp of Vermont, was approved by the US Food and Drug Administration in September 1996. The company has provided training sessions at major universities nationwide and exhibited at national professional association meetings. A training video and two more films will be available in 1998. The new clip is considered a more modern approach to a tubal occlusion method, which relies on newer materials and solves prior problems. Physicians usually used Falope rings, which had better failure rates than the Hulka clip and bipolar coagulation methods. There is a need for more long-term and large scale information exchange about the new Filshie clip. Some physicians still use the Falope ring because it is cost effective and well-studied. Physicians are warned to continue to advise women about the potential failure rates up to 10 years after sterilization and the 1 in 3 risk of ectopic pregnancy. Counseling about failure rates and the risk of ectopic pregnancy should target women under 30 years old, who have the highest failure rates, and women 30-34 years old. All sterilized women should be advised to seek a provider immediately if they have pregnancy symptoms following sterilization. Counseling should include the issue of "regrets," since it is a permanent method. All women should know about nonpermanent methods and experience a basic informed consent process. Young women and newly divorced women are particularly vulnerable to the "regrets" syndrome.

The Relationship Between Method of Viewing Lectures, Course Ratings, and Course Timing.

Science.gov (United States)

Burton, William B; Ma, Terence P; Grayson, Martha S

2017-01-01

In recent years, medical schools have provided students access to video recordings of course lectures, but few studies have investigated the impact of this on ratings of courses and teachers. This study investigated whether the method of viewing lectures was related to student ratings of the course and its components and whether the method used changed over time. Preclinical medical students indicated whether ratings of course lectures were based primarily on lecture attendance, video capture, or both. Students were categorized into Lecture, Video, or Both groups based on their responses to this question. The data consisted of 7584 student evaluations collected over 2 years. Students who attended live lectures rated the course and its components higher than students who only viewed the video or used both methods, although these differences were very small. Students increasingly watched lectures exclusively by video over time: in comparison with first-year students, second-year students were more likely to watch lectures exclusively by video; in comparison with students in the first half of the academic year, students in the second half of the academic year were more likely to watch lectures exclusively by video. With the increase in use of lecture video recordings across medical schools, attention must be paid to student attitudes regarding these methods.

'Continuation rate', 'use-effectiveness' and their assessment for the diaphragm and jelly method.

Science.gov (United States)

Chandrasekaran, C; Karkal, M

1972-11-01

Abstract The application of the life-table technique in the calculation of use-effectiveness of a contraceptive was proposed by Potter in 1963.(1) The technique was also found to be useful in assessing the duration for which the use of a contraceptive was continued. The keen interest that existed in the use of IUD in the mid-1960's was reflected in the terminology developed for assessment of the continuity of use. 'Retention rate' was a frequently used index.(2) Because of the development of the concept of segments whose end-period determined either termination of the use of a method or its continuance on a cut-off date, 'closure rate' and 'termination rate' have been used as measures of the discontinuance of the use of methods primarily of the IUD.(3) While discussing concepts relating to acceptance, use and effectiveness of family planning methods, more generally, an expert group suggested that 'continuation' should be used to denote that a client (or a couple) had begun to practise a method and that the method was still being practised.(4) Since this group defined 'an acceptor' as a person taking service and/or advice, i.e. having an IUD insertion or a sterilization operation or receiving supplies (or advice on methods such as 'rhythm' or coitus-interruptus with the intent of using the method), the base for the assessment of continuation rates, according to this group, would be only those acceptors who had begun using the method. The lifetable method has also been used for the study of the continuation rate for pill acceptors.(5) Balakrishnan, et al., made a study of continuation rates of oral contraceptives using the multiple decrement life-table technique.(6).

Trends in Suicide Methods and Rates among Older Adults in South Korea: A Comparison with Japan

OpenAIRE

Park, Subin; Lee, Hochang Benjamin; Lee, Su Yeon; Lee, Go Eun; Ahn, Myung Hee; Yi, Ki Kyoung; Hong, Jin Pyo

2016-01-01

Objective Lethality of the chosen method during a suicide attempt is a strong risk factor for completion of suicide. We examined whether annual changes in the pattern of suicide methods is related to annual changes in suicide rates among older adults in South Korea and Japan. Methods We analyzed annual the World Health Organization data on rates and methods of suicide from 2000 to 2011 in South Korea and Japan. Results For Korean older adults, there was a significant positive correlation betw...

Work-related ill health in doctors working in Great Britain: incidence rates and trends.

Science.gov (United States)

Zhou, Anli Yue; Carder, Melanie; Gittins, Matthew; Agius, Raymond

2017-11-01

Background Doctors have a higher prevalence of mental ill health compared with other professional occupations but incidence rates are poorly studied. Aims To determine incidence rates and trends of work-related ill health (WRIH) and work-related mental ill health (WRMIH) in doctors compared with other professions in Great Britain. Method Incidence rates were calculated using an occupational physician reporting scheme from 2005-2010. Multilevel regression was use to study incidence rates from 2001 to 2014. Results Annual incidence rates for WRIH and WRIMH in doctors were 515 and 431 per 100 000 people employed, respectively. Higher incidence rates for WRIH and WRMIH were observed for ambulance staff and nurses, respectively. Doctors demonstrated an annual average incidence rates increase for WRIH and WRMIH, especially in women, whereas the other occupations demonstrated a decreasing or static trend. The difference in trends between the occupations was statistically significant. Conclusions WRIH and WRMIH incidence rate are increasing in doctors, especially in women, warranting further research. © The Royal College of Psychiatrists 2017.

A new numerical method to solve the dispersion relation in multispecies plasma

International Nuclear Information System (INIS)

Cereceda, C.; Puerta, J.

2000-01-01

In this paper a new accurate and fast method for solving the linear dispersion relation for multispecies plasma is introduced. The method uses a four poles fractional approximation for the Z dispersion function, transforming the dispersion relation into a polynomial form. Time and space growth rates are then calculated. Calculations for a single beam - plasma are carried out being in good agreement with several authors. This method is very effective to simplify the calculation of growth rates in multi-ion plasmas. For multispecies plasmas several new modes of propagation arise. For two ion beam - plasma system, two slow modes can propagate, both which are unstable. Two maxima in the growth rates corresponding to each of these modes can be excited. The instability of one of the slow modes is fed by the energy of the light ion beam and the other one is fed by heavy beam ions. Each one of these two maxima is increased when the concentration of the corresponding species increases. But even for a small concentration of the light beam, the growth rate of the mode fed by it is the largest one, because in the single ion beam-plasma system the lighter ion yields the largest growth rate. (orig.)

New methods for estimating follow-up rates in cohort studies

Directory of Open Access Journals (Sweden)

Xiaonan Xue

2017-12-01

Full Text Available Abstract Background The follow-up rate, a standard index of the completeness of follow-up, is important for assessing the validity of a cohort study. A common method for estimating the follow-up rate, the “Percentage Method”, defined as the fraction of all enrollees who developed the event of interest or had complete follow-up, can severely underestimate the degree of follow-up. Alternatively, the median follow-up time does not indicate the completeness of follow-up, and the reverse Kaplan-Meier based method and Clark’s Completeness Index (CCI also have limitations. Methods We propose a new definition for the follow-up rate, the Person-Time Follow-up Rate (PTFR, which is the observed person-time divided by total person-time assuming no dropouts. The PTFR cannot be calculated directly since the event times for dropouts are not observed. Therefore, two estimation methods are proposed: a formal person-time method (FPT in which the expected total follow-up time is calculated using the event rate estimated from the observed data, and a simplified person-time method (SPT that avoids estimation of the event rate by assigning full follow-up time to all events. Simulations were conducted to measure the accuracy of each method, and each method was applied to a prostate cancer recurrence study dataset. Results Simulation results showed that the FPT has the highest accuracy overall. In most situations, the computationally simpler SPT and CCI methods are only slightly biased. When applied to a retrospective cohort study of cancer recurrence, the FPT, CCI and SPT showed substantially greater 5-year follow-up than the Percentage Method (92%, 92% and 93% vs 68%. Conclusions The Person-time methods correct a systematic error in the standard Percentage Method for calculating follow-up rates. The easy to use SPT and CCI methods can be used in tandem to obtain an accurate and tight interval for PTFR. However, the FPT is recommended when event rates and

Connecting Related Rates and Differential Equations

Science.gov (United States)

Brandt, Keith

2012-01-01

This article points out a simple connection between related rates and differential equations. The connection can be used for in-class examples or homework exercises, and it is accessible to students who are familiar with separation of variables.

Input data preprocessing method for exchange rate forecasting via neural network

Directory of Open Access Journals (Sweden)

Antić Dragan S.

2014-01-01

Full Text Available The aim of this paper is to present a method for neural network input parameters selection and preprocessing. The purpose of this network is to forecast foreign exchange rates using artificial intelligence. Two data sets are formed for two different economic systems. Each system is represented by six categories with 70 economic parameters which are used in the analysis. Reduction of these parameters within each category was performed by using the principal component analysis method. Component interdependencies are established and relations between them are formed. Newly formed relations were used to create input vectors of a neural network. The multilayer feed forward neural network is formed and trained using batch training. Finally, simulation results are presented and it is concluded that input data preparation method is an effective way for preprocessing neural network data. [Projekat Ministarstva nauke Republike Srbije, br.TR 35005, br. III 43007 i br. III 44006

Sodium flow rate measurement method of annular linear induction pumps

International Nuclear Information System (INIS)

Araseki, Hideo; Kirillov, Igor R.; Preslitsky, Gennady V.

2012-01-01

Highlights: ► We found a new method of flow rate monitoring of electromagnetic pump. ► The method is very simple and does not require a large space. ► The method was verified with an experiment and a numerical analysis. ► The experimental data and the numerical results are in good agreement. - Abstract: The present paper proposes a method for measuring sodium flow rate of annular linear induction pumps. The feature of the method lies in measuring the leaked magnetic field with measuring coils near the stator end on the outlet side and in correlating it with the sodium flow rate. This method is verified through an experiment and a numerical analysis. The data obtained in the experiment reveals that the correlation between the leaked magnetic field and the sodium flow rate is almost linear. The result of the numerical analysis agrees with the experimental data. The present method will be particularly effective to sodium flow rate monitoring of each one of plural annular linear induction pumps arranged in parallel in a vessel which forms a large-scale pump unit.

Associations between changes in the pattern of suicide methods and rates in Korea, the US, and Finland

OpenAIRE

Park, Subin; Ahn, Myung Hee; Lee, Ahrong; Hong, Jin Pyo

2014-01-01

Background The lethality of the suicide method employed is a strong risk factor for the completion of suicide. We examined whether annual changes in the pattern of suicide methods is related to annual changes in suicide rates in South Korea, the United States (US), and Finland. Methods We analyzed annual data from 2000–2011 for South Korea and Finland, and 2000–2010 for the US in order to examine trends in the rates and methods of suicide. Data on suicide methods were obtained from the World ...

Methods of numerical relativity

International Nuclear Information System (INIS)

Piran, T.

1983-01-01

Numerical Relativity is an alternative to analytical methods for obtaining solutions for Einstein equations. Numerical methods are particularly useful for studying generation of gravitational radiation by potential strong sources. The author reviews the analytical background, the numerical analysis aspects and techniques and some of the difficulties involved in numerical relativity. (Auth.)

Literature review and recommendation of methods for measuring relative permeability of anhydrite from the Salado Formation at the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Christiansen, R.L. [Colorado School of Mines, Golden, CO (United States). Dept. of Petroleum Engineering; Howarth, S.M. [Sandia National Labs., Albuquerque, NM (United States)

1995-08-01

This report documents a literature review of methods for measuring relative permeability as applied to low permeability anhydrite rock samples from the Salado Formation. About one hundred papers were reviewed, and four methods were identified as promising techniques for measuring the relative permeability of the Salado anhydrite: (1) the unsteady-state high-rate method, (2) the unsteady-state stationary-liquid method, (3) the unsteady-state centrifuge method, and (4) the unsteady-state low-rate method. Except for the centrifuge method, all have been used for low permeability rocks. The unsteady-state high-rate method is preferred for measuring relative permeability of Salado anhydrite, and the unsteady-state stationary-liquid method could be well suited for measuring gas relative permeability of Salado anhydrite. The unsteady-state low-rate method, which combines capillary pressure effects with relative permeability concepts may also prove effective. Likewise, the unsteady-state centrifuge method may be an efficient means for measuring brine relative permeability for Salado anhydrite, especially at high gas saturations.

Literature review and recommendation of methods for measuring relative permeability of anhydrite from the Salado Formation at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Christiansen, R.L.

1995-08-01

This report documents a literature review of methods for measuring relative permeability as applied to low permeability anhydrite rock samples from the Salado Formation. About one hundred papers were reviewed, and four methods were identified as promising techniques for measuring the relative permeability of the Salado anhydrite: (1) the unsteady-state high-rate method, (2) the unsteady-state stationary-liquid method, (3) the unsteady-state centrifuge method, and (4) the unsteady-state low-rate method. Except for the centrifuge method, all have been used for low permeability rocks. The unsteady-state high-rate method is preferred for measuring relative permeability of Salado anhydrite, and the unsteady-state stationary-liquid method could be well suited for measuring gas relative permeability of Salado anhydrite. The unsteady-state low-rate method, which combines capillary pressure effects with relative permeability concepts may also prove effective. Likewise, the unsteady-state centrifuge method may be an efficient means for measuring brine relative permeability for Salado anhydrite, especially at high gas saturations

A review on measuring methods of gas-liquid flow rates

International Nuclear Information System (INIS)

Minemura, Kiyoshi; Yamashita, Masato

2000-01-01

This paper presents a review on the state of current measuring techniques for gas-liquid multiphase flow rates. After briefly discussing the basic idea on measuring methods for single-phase and two-phase flows, existing methods for the two-phase flow rates are classified into several types, that is, with or without a homogenizing device, single or combined method of several techniques, with intrusive or non-intrusive sensors, and physical or software method. Each methods are comparatively reviewed in view of measuring accuracy and manageability. Its scope also contains the techniques developed for petroleum-gas-water flow rates. (author)

High School Graduation Rates:Alternative Methods and Implications

OpenAIRE

Jing Miao; Walt Haney

2004-01-01

The No Child Left Behind Act has brought great attention to the high school graduation rate as one of the mandatory accountability measures for public school systems. However, there is no consensus on how to calculate the high school graduation rate given the lack of longitudinal databases that track individual students. This study reviews literature on and practices in reporting high school graduation rates, compares graduation rate estimates yielded from alternative methods, and estimates d...

Decreases in Smoking-Related Cancer Mortality Rates Are Associated with Birth Cohort Effects in Korean Men.

Science.gov (United States)

Jee, Yon Ho; Shin, Aesun; Lee, Jong-Keun; Oh, Chang-Mo

2016-12-05

Background: This study aimed to examine trends in smoking-related cancer mortality rates and to investigate the effect birth cohort on smoking-related cancer mortality in Korean men. Methods: The number of smoking-related cancer deaths and corresponding population numbers were obtained from Statistics Korea for the period 1984-2013. Joinpoint regression analysis was used to detect changes in trends in age-standardized mortality rates. Birth-cohort specific mortality rates were illustrated by 5 year age groups. Results: The age-standardized mortality rates for oropharyngeal decreased from 2003 to 2013 (annual percent change (APC): -3.1 (95% CI, -4.6 to -1.6)) and lung cancers decreased from 2002 to 2013 (APC -2.4 (95% CI -2.7 to -2.2)). The mortality rates for esophageal declined from 1994 to 2002 (APC -2.5 (95% CI -4.1 to -0.8)) and from 2002 to 2013 (APC -5.2 (95% CI -5.7 to -4.7)) and laryngeal cancer declined from 1995 to 2013 (average annual percent change (AAPC): -3.3 (95% CI -4.7 to -1.8)). By the age group, the trends for the smoking-related cancer mortality except for oropharyngeal cancer have changed earlier to decrease in the younger age group. The birth-cohort specific mortality rates and age-period-cohort analysis consistently showed that all birth cohorts born after 1930 showed reduced mortality of smoking-related cancers. Conclusions: In Korean men, smoking-related cancer mortality rates have decreased. Our findings also indicate that current decreases in smoking-related cancer mortality rates have mainly been due to a decrease in the birth cohort effect, which suggest that decrease in smoking rates.

Evolution of cultural traits occurs at similar relative rates in different world regions.

Science.gov (United States)

Currie, Thomas E; Mace, Ruth

2014-11-22

A fundamental issue in understanding human diversity is whether or not there are regular patterns and processes involved in cultural change. Theoretical and mathematical models of cultural evolution have been developed and are increasingly being used and assessed in empirical analyses. Here, we test the hypothesis that the rates of change of features of human socio-cultural organization are governed by general rules. One prediction of this hypothesis is that different cultural traits will tend to evolve at similar relative rates in different world regions, despite the unique historical backgrounds of groups inhabiting these regions. We used phylogenetic comparative methods and systematic cross-cultural data to assess how different socio-cultural traits changed in (i) island southeast Asia and the Pacific, and (ii) sub-Saharan Africa. The relative rates of change in these two regions are significantly correlated. Furthermore, cultural traits that are more directly related to external environmental conditions evolve more slowly than traits related to social structures. This is consistent with the idea that a form of purifying selection is acting with greater strength on these more environmentally linked traits. These results suggest that despite contingent historical events and the role of humans as active agents in the historical process, culture does indeed evolve in ways that can be predicted from general principles.

A parametric method for assessing diversification-rate variation in phylogenetic trees.

Science.gov (United States)

Shah, Premal; Fitzpatrick, Benjamin M; Fordyce, James A

2013-02-01

Phylogenetic hypotheses are frequently used to examine variation in rates of diversification across the history of a group. Patterns of diversification-rate variation can be used to infer underlying ecological and evolutionary processes responsible for patterns of cladogenesis. Most existing methods examine rate variation through time. Methods for examining differences in diversification among groups are more limited. Here, we present a new method, parametric rate comparison (PRC), that explicitly compares diversification rates among lineages in a tree using a variety of standard statistical distributions. PRC can identify subclades of the tree where diversification rates are at variance with the remainder of the tree. A randomization test can be used to evaluate how often such variance would appear by chance alone. The method also allows for comparison of diversification rate among a priori defined groups. Further, the application of the PRC method is not restricted to monophyletic groups. We examined the performance of PRC using simulated data, which showed that PRC has acceptable false-positive rates and statistical power to detect rate variation. We apply the PRC method to the well-studied radiation of North American Plethodon salamanders, and support the inference that the large-bodied Plethodon glutinosus clade has a higher historical rate of diversification compared to other Plethodon salamanders. © 2012 The Author(s). Evolution© 2012 The Society for the Study of Evolution.

Influence of the relative deformation rate on tube processing by ultrasonic vibration drawing

International Nuclear Information System (INIS)

Susan, M.; Bujoreanu, L. G.; Galusca, D. G.; Munteanu, C.; Lliescu, V.

2004-01-01

After a brief review of the friction reversion mechanism during ultrasonic vibration drawing of tubes (UVD), the paper introduces a method to determine the drawing force based on the theorem of total consumed power, in the case of tube processing. The experiments performed on tubes made from 10TiNiCr180 (AISI321) austenitic stainless steel confirm the superiority of UVD technology regarding the diminution of the drawing force, the increase of the plasticity and the improvement of the safety coefficient, tendencies that are enhanced with the decrease of the relative drawing rate. The best results were obtained for the relative drawing rate of 0.12 for which the drawing force decreased with 33%, plasticity increased with 9% and safety coefficient with 22%, as compared to CT. (Author) 10 refs

Simple method for the estimation of glomerular filtration rate

Energy Technology Data Exchange (ETDEWEB)

Groth, T [Group for Biomedical Informatics, Uppsala Univ. Data Center, Uppsala (Sweden); Tengstroem, B [District General Hospital, Skoevde (Sweden)

1977-02-01

A simple method is presented for indirect estimation of the glomerular filtration rate from two venous blood samples, drawn after a single injection of a small dose of (/sup 125/I)sodium iothalamate (10 ..mu..Ci). The method does not require exact dosage, as the first sample, taken after a few minutes (t=5 min) after injection, is used to normilize the value of the second sample, which should be taken in between 2 to 4 h after injection. The glomerular filtration rate, as measured by standard insulin clearance, may then be predicted from the logarithm of the normalized value and linear regression formulas with a standard error of estimate of the order of 1 to 2 ml/min/1.73 m/sup 2/. The slope-intercept method for direct estimation of glomerular filtration rate is also evaluated and found to significantly underestimate standard insulin clearance. The normalized 'single-point' method is concluded to be superior to the slope-intercept method and more sophisticated methods using curve fitting technique, with regard to predictive force and clinical applicability.

Sovereign ratings in the post-crisis world : an analysis of actual, shadow and relative risk ratings

OpenAIRE

Basu, Kaushik; De, Supriyo; Ratha, Dilip; Timmer, Hans

2013-01-01

This paper analyzes the evolution of sovereign credit ratings in the wake of the global financial crisis by studying changes in actual, shadow, and relative ratings between 2008 and 2012. For countries that do not have a rating from the major rating agencies, shadow ratings are estimated as a function of macroeconomic, structural, and governance variables. The shadow rating exercise confir...

Decreases in Smoking-Related Cancer Mortality Rates Are Associated with Birth Cohort Effects in Korean Men

Directory of Open Access Journals (Sweden)

Yon Ho Jee

2016-12-01

Full Text Available Background: This study aimed to examine trends in smoking-related cancer mortality rates and to investigate the effect birth cohort on smoking-related cancer mortality in Korean men. Methods: The number of smoking-related cancer deaths and corresponding population numbers were obtained from Statistics Korea for the period 1984–2013. Joinpoint regression analysis was used to detect changes in trends in age-standardized mortality rates. Birth-cohort specific mortality rates were illustrated by 5 year age groups. Results: The age-standardized mortality rates for oropharyngeal decreased from 2003 to 2013 (annual percent change (APC: −3.1 (95% CI, −4.6 to −1.6 and lung cancers decreased from 2002 to 2013 (APC −2.4 (95% CI −2.7 to −2.2. The mortality rates for esophageal declined from 1994 to 2002 (APC −2.5 (95% CI −4.1 to −0.8 and from 2002 to 2013 (APC −5.2 (95% CI −5.7 to −4.7 and laryngeal cancer declined from 1995 to 2013 (average annual percent change (AAPC: −3.3 (95% CI −4.7 to −1.8. By the age group, the trends for the smoking-related cancer mortality except for oropharyngeal cancer have changed earlier to decrease in the younger age group. The birth-cohort specific mortality rates and age-period-cohort analysis consistently showed that all birth cohorts born after 1930 showed reduced mortality of smoking-related cancers. Conclusions: In Korean men, smoking-related cancer mortality rates have decreased. Our findings also indicate that current decreases in smoking-related cancer mortality rates have mainly been due to a decrease in the birth cohort effect, which suggest that decrease in smoking rates.

Identification of strain-rate and thermal sensitive material model with an inverse method

CERN Document Server

Peroni, L; Peroni, M

2010-01-01

This paper describes a numerical inverse method to extract material strength parameters from the experimental data obtained via mechanical tests at different strain-rates and temperatures. It will be shown that this procedure is particularly useful to analyse experimental results when the stress-strain fields in the specimen cannot be correctly described via analytical models. This commonly happens in specimens with no regular shape, in specimens with a regular shape when some instability phenomena occur (for example the necking phenomena in tensile tests that create a strongly heterogeneous stress-strain fields) or in dynamic tests (where the strain-rate field is not constant due to wave propagation phenomena). Furthermore the developed procedure is useful to take into account thermal phenomena generally affecting high strain-rate tests due to the adiabatic overheating related to the conversion of plastic work. The method presented requires strong effort both from experimental and numerical point of view, an...

Methods for estimating disease transmission rates: Evaluating the precision of Poisson regression and two novel methods

DEFF Research Database (Denmark)

Kirkeby, Carsten Thure; Hisham Beshara Halasa, Tariq; Gussmann, Maya Katrin

2017-01-01

the transmission rate. We use data from the two simulation models and vary the sampling intervals and the size of the population sampled. We devise two new methods to determine transmission rate, and compare these to the frequently used Poisson regression method in both epidemic and endemic situations. For most...... tested scenarios these new methods perform similar or better than Poisson regression, especially in the case of long sampling intervals. We conclude that transmission rate estimates are easily biased, which is important to take into account when using these rates in simulation models....

Method and system of simulating nuclear power plant count rate for training purposes

International Nuclear Information System (INIS)

Alliston, W.H.; Koenig, R.H.

1975-01-01

A method and system are described for the real-time simulation of the dynamic operation of a nuclear power plant in which nuclear flux rate counters are provided for monitoring the rate of nuclear fission of the reactor. The system utilizes apparatus that includes digital computer means for calculating data relating to the rate of nuclear fission of a simulated reactor model, which rate is controlled in accordance with the operation of control panel devices. A digital number from the computer corresponding to the flux rate controls an oscillator driven counter means to produce a pulse after a predetermined count. This pulse controls an oscillator driven polynomial counter to count a random number that controls a third counter in accordance with pulse from the first counter to produce a random fission count for operating the meters. (U.S.)

Novel Fingertip Image-Based Heart Rate Detection Methods for a Smartphone

Directory of Open Access Journals (Sweden)

Rifat Zaman

2017-02-01

Full Text Available We hypothesize that our fingertip image-based heart rate detection methods using smartphone reliably detect the heart rhythm and rate of subjects. We propose fingertip curve line movement-based and fingertip image intensity-based detection methods, which both use the movement of successive fingertip images obtained from smartphone cameras. To investigate the performance of the proposed methods, heart rhythm and rate of the proposed methods are compared to those of the conventional method, which is based on average image pixel intensity. Using a smartphone, we collected 120 s pulsatile time series data from each recruited subject. The results show that the proposed fingertip curve line movement-based method detects heart rate with a maximum deviation of 0.0832 Hz and 0.124 Hz using time- and frequency-domain based estimation, respectively, compared to the conventional method. Moreover, another proposed fingertip image intensity-based method detects heart rate with a maximum deviation of 0.125 Hz and 0.03 Hz using time- and frequency-based estimation, respectively.

Parallel efficient rate control methods for JPEG 2000

Science.gov (United States)

Martínez-del-Amor, Miguel Á.; Bruns, Volker; Sparenberg, Heiko

2017-09-01

Since the introduction of JPEG 2000, several rate control methods have been proposed. Among them, post-compression rate-distortion optimization (PCRD-Opt) is the most widely used, and the one recommended by the standard. The approach followed by this method is to first compress the entire image split in code blocks, and subsequently, optimally truncate the set of generated bit streams according to the maximum target bit rate constraint. The literature proposes various strategies on how to estimate ahead of time where a block will get truncated in order to stop the execution prematurely and save time. However, none of them have been defined bearing in mind a parallel implementation. Today, multi-core and many-core architectures are becoming popular for JPEG 2000 codecs implementations. Therefore, in this paper, we analyze how some techniques for efficient rate control can be deployed in GPUs. In order to do that, the design of our GPU-based codec is extended, allowing stopping the process at a given point. This extension also harnesses a higher level of parallelism on the GPU, leading to up to 40% of speedup with 4K test material on a Titan X. In a second step, three selected rate control methods are adapted and implemented in our parallel encoder. A comparison is then carried out, and used to select the best candidate to be deployed in a GPU encoder, which gave an extra 40% of speedup in those situations where it was really employed.

Associations between changes in the pattern of suicide methods and rates in Korea, the US, and Finland

Science.gov (United States)

2014-01-01

Background The lethality of the suicide method employed is a strong risk factor for the completion of suicide. We examined whether annual changes in the pattern of suicide methods is related to annual changes in suicide rates in South Korea, the United States (US), and Finland. Methods We analyzed annual data from 2000–2011 for South Korea and Finland, and 2000–2010 for the US in order to examine trends in the rates and methods of suicide. Data on suicide methods were obtained from the World Health Organization (WHO) mortality database. Results Along with an annual rapid increase in suicide rates, the incidence of hanging increased steadily while suicide by self-poisoning steadily decreased in South Korea. In the US, along with an annual increase in suicide rates, the proportion of suicides committed by hanging increased while those committed with the use of firearms steadily decreased. In Finland, annual changes in the suicide rate and suicide method were not statistically significant during the study period. Conclusions Our present findings suggest that the increased use of specific lethal methods for suicide, namely hanging, is reflected in the increased suicide rates in the Korean and the US populations. The most effective approach for reducing overall suicide rates may be the implementation of population-based initiatives that reduce both the accessibility (e.g., access to firearms) and the social acceptability (e.g., effective and responsible regulations for reporting suicide) of lethal methods of suicide. PMID:24949083

Re-assessing copepod growth using the Moult Rate method

DEFF Research Database (Denmark)

Hirst, Andrew G.; Keister, J. E.; Richardson, A. J.

2014-01-01

Estimating growth and production rates of mesozooplankton, and copepods in particular, is important in describing flows of material and energy though pelagic systems. Over the past 30 years, the Moult Rate (MR) method has been used to estimate juvenile copepod growth rates in ∼40 papers. Yet the MR......-moulting stage, e.g. copepodite stage 5 to adult. We performed experiments with Calanus pacificus to estimate growth of stage C5 using an alternative method. We found that the error size and sign varied between mass type (i.e. DW, C and N). Recommendations for practical future assessments of growth in copepods...

Sodium flow rate measurement method of annular linear induction pump

International Nuclear Information System (INIS)

Araseki, Hideo

2011-01-01

This report describes a method for measuring sodium flow rate of annular linear induction pumps arranged in parallel and its verification result obtained through an experiment and a numerical analysis. In the method, the leaked magnetic field is measured with measuring coils at the stator end on the outlet side and is correlated with the sodium flow rate. The experimental data and the numerical result indicate that the leaked magnetic field at the stator edge keeps almost constant when the sodium flow rate changes and that the leaked magnetic field change arising from the flow rate change is small compared with the overall leaked magnetic field. It is shown that the correlation between the leaked magnetic field and the sodium flow rate is almost linear due to this feature of the leaked magnetic field, which indicates the applicability of the method to small-scale annular linear induction pumps. (author)

Accretion rate in mangroves sediment at Sungai Miang, Pahang, Malaysia: 230Thexcess versus artificial horizon marker method

International Nuclear Information System (INIS)

Kamaruzzaman Yunus; Jamil Tajam; Hasrizal Shaari; Noor Azhar Mohd Shazili; Misbahul Mohd Amin

2008-01-01

Mangroves have enormous ecological value and one of their important role is to act as an efficient sediment trappers which dominantly supplied by rivers and the atmosphere to the oceans. Applying the 230 Th excess method, an average accretion rate of 0.54 cm yr -1 was obtained. this is comparable to that of an artificial horizon marker method giving an average of 0.54 cm yr -1 . The 230 Th excess method provides a rapid and simple method of evaluating 230 Th excess accumulation histories in sediment cores. Sample preparation is also significantly simplified, thus providing a relatively quick and easy method for the determination of the accretion rate in mangrove area. (author)

A method for investigating relative timing information on phylogenetic trees.

Science.gov (United States)

Ford, Daniel; Matsen, Frederick A; Stadler, Tanja

2009-04-01

In this paper, we present a new way to describe the timing of branching events in phylogenetic trees. Our description is in terms of the relative timing of diversification events between sister clades; as such it is complementary to existing methods using lineages-through-time plots which consider diversification in aggregate. The method can be applied to look for evidence of diversification happening in lineage-specific "bursts", or the opposite, where diversification between 2 clades happens in an unusually regular fashion. In order to be able to distinguish interesting events from stochasticity, we discuss 2 classes of neutral models on trees with relative timing information and develop a statistical framework for testing these models. These model classes include both the coalescent with ancestral population size variation and global rate speciation-extinction models. We end the paper with 2 example applications: first, we show that the evolution of the hepatitis C virus deviates from the coalescent with arbitrary population size. Second, we analyze a large tree of ants, demonstrating that a period of elevated diversification rates does not appear to have occurred in a bursting manner.

Rating Methods for Proactive Recommendation on Smartwatches

OpenAIRE

Janosch Maier, Wolfgang Wörndl

2015-01-01

This paper analyzes possible interaction methods for using a recommender system on a smartwatch. As prerequisite, we describe interaction patterns currently used by Android Wear applications. Based on a prototype implementation the interaction methods action buttons, two button card and swipes are compared against each other. In a user study, 31 participating students were asked to rate restaurant recommendations offered in the setting of a context-aware, proactive recommender system. For eac...

Proposed test method for determining discharge rates from water closets

DEFF Research Database (Denmark)

Nielsen, V.; Fjord Jensen, T.

At present the rates at which discharge takes place from sanitary appliances are mostly known only in the form of estimated average values. SBI has developed a measuring method enabling determination of the exact rate of discharge from a sanitary appliance as function of time. The methods depends...

A method of estimating the knock rating of hydrocarbon fuel blend

Science.gov (United States)

Sanders, Newell D

1943-01-01

The usefulness of the knock ratings of pure hydrocarbon compounds would be increased if some reliable method of calculating the knock ratings of fuel blends was known. The purpose of this study was to investigate the possibility of developing a method of predicting the knock ratings of fuel blends.

Development in self-rated health among older people as determinant of social relations

DEFF Research Database (Denmark)

Lund, Rikke; Avlund, Kirsten; Modvig, Jens

2004-01-01

.3-5.2) in the two-point analyses. Furthermore, a deterioration in SRH predicted poor contact satisfaction OR=2.8 (1.7-4.5). All analyses were adjusted for age, gender, mental health, functional ability, cohabitation status, and a measure of social relations at baseline. Results for the three-point analyses were......AIM: The purpose of this study was to analyse whether development in self-rated health (SRH) over four years was associated with the structure of and satisfaction with social relations, at four and eight years follow-up, among elderly women and men. METHODS: A longitudinal questionnaire-based study...

Differentiation of pain ratings in combat-related posttraumatic stress disorder.

Science.gov (United States)

Kraus, Anja; Geuze, Elbert; Schmahl, Christian; Greffrath, Wolfgang; Treede, Rolf-Detlef; Bohus, Martin; Vermetten, Eric

2009-06-01

Although posttraumatic stress disorder (PTSD) is associated with chronic pain, preliminary evidence suggests reduced experimental pain sensitivity in this disorder. The questions addressed in the present study were whether pain perception would also be reduced in PTSD patients who are not suffering from chronic pain symptoms, and whether a reduction in pain sensitivity would also be present in combat veterans who did not develop PTSD. For this, we determined thermal detection and pain thresholds in 10 male combat-related PTSD patients, 10 combat control subjects (no PTSD) and 10 healthy controls without combat experience. All subjects were pain free. First, we measured thermal sensory thresholds with ramped heat and cold stimuli using the method of limits. Ramped thermal sensory stimulation revealed no deficits for the detection of (non-noxious) f2.1thermal stimuli between groups. In contrast, heat and cold pain thresholds in both combat groups (PTSD and combat controls) were significantly increased compared to healthy controls. However, these stimuli could not distinguish between the two groups due to ceiling effects. When using longer-lasting heat stimulation at different temperatures (30s duration; method of fixed stimuli), we found significantly lower frequency of pain reports in PTSD patients compared with both combat and healthy controls, as well as significantly lower pain ratings. Our results suggest an association of PTSD with reduced pain sensitivity, which could be related to PTSD-related (neuro-)psychological alterations or to a pre-existing risk factor for the disorder.

Dating of Pregnancy in First versus Second Trimester in Relation to Post-Term Birth Rate

DEFF Research Database (Denmark)

Thagaard, Ida Näslund; Krebs, Lone; Lausten-Thomsen, Ulrik

2016-01-01

OBJECTIVES: To evaluate in a national standardised setting whether the performance of ultrasound dating during the first rather than the second trimester of pregnancy had consequences regarding the definition of pre- and post-term birth rates. METHODS: A cohort study of 8,551 singleton pregnancies...... with spontaneous delivery was performed from 2006 to 2012 at Copenhagen University Hospital, Holbæk, Denmark. We determined the duration of pregnancy calculated by last menstrual period, crown rump length (CRL), biparietal diameter (1st trimester), BPD (2nd trimester), and head circumference and compared mean...... and median durations, the mean differences, the systematic discrepancies, and the percentages of pre-term and post-term pregnancies in relation to each method. The primary outcomes were post-term and pre-term birth rates defined by different dating methods. RESULTS: The change from use of second to first...

Study (Prediction of Main Pipes Break Rates in Water Distribution Systems Using Intelligent and Regression Methods

Directory of Open Access Journals (Sweden)

Massoud Tabesh

2011-07-01

Full Text Available Optimum operation of water distribution networks is one of the priorities of sustainable development of water resources, considering the issues of increasing efficiency and decreasing the water losses. One of the key subjects in optimum operational management of water distribution systems is preparing rehabilitation and replacement schemes, prediction of pipes break rate and evaluation of their reliability. Several approaches have been presented in recent years regarding prediction of pipe failure rates which each one requires especial data sets. Deterministic models based on age and deterministic multi variables and stochastic group modeling are examples of the solutions which relate pipe break rates to parameters like age, material and diameters. In this paper besides the mentioned parameters, more factors such as pipe depth and hydraulic pressures are considered as well. Then using multi variable regression method, intelligent approaches (Artificial neural network and neuro fuzzy models and Evolutionary polynomial Regression method (EPR pipe burst rate are predicted. To evaluate the results of different approaches, a case study is carried out in a part ofMashhadwater distribution network. The results show the capability and advantages of ANN and EPR methods to predict pipe break rates, in comparison with neuro fuzzy and multi-variable regression methods.

Recent amendments of the KTA 2101.2 fire barrier resistance rating method for German NPP and comparison to the Eurocode t-equivalent method

Energy Technology Data Exchange (ETDEWEB)

Forell, Burkhard [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany)

2015-12-15

The German nuclear standard KTA2101 on ''Fire Protection in Nuclear Power Plants'', Part 2: ''Fire Protection of Structural Plant Components'' includes a simplified method for the fire resistance rating of fire barrier elements based on the t-equivalent approach. The method covers the specific features of compartments in nuclear power plant buildings in terms of the boundary conditions which have to be expected in the event of fire. The method has proven to be relatively simple and straightforward to apply. The paper gives an overview of amendments with respect to the rating method made within the regular review of the KTA 2101.2. A comparison to the method of the non-nuclear Eurocode 1 is also provided. The Eurocode method is closely connected to the German standard DIN 18230 on structural fire protection in industrial buildings. Special emphasis of the comparison is given to the ventilation factor, which has a large impact on the required fire resistance.

Assessment of Estimation Methods ForStage-Discharge Rating Curve in Rippled Bed Rivers

Directory of Open Access Journals (Sweden)

P. Maleki

2016-02-01

in a flume located at the hydraulic laboratory ofShahrekordUniversity, Iran. Bass (1993 [reported in Joep (1999], determined an empirical relation between median grain size, D50, and equilibrium ripple length, l: L=75.4 (logD50+197 Eq.(1 Where l and D50 are both given in millimeters. Raudkivi (1997 [reported in Joep (1999], proposed another empirical relation to estimate the ripple length that D50 is given in millimeters: L=245(D500.35 Eq. (2 Flemming (1988 [reported in Joep (1999], derived an empirical relation between mean ripple length and ripple height based on a large dataset: hm= 0.0677l 0.8098 Eq.(3 Where hm is the mean ripple height (m and l is the mean ripple length (m. Ikeda S. and Asaeda (1983 investigated the characteristics of flow over ripples. They found that there are separation areas and vortices at lee of ripples and maximum turbulent diffusion occurs in these areas. Materials and Methods: In this research, the effects of two different type of ripples onthe hydraulic characteristics of flow were experimentally studied in a flume located at the hydraulic laboratory of ShahrekordUniversity, Iran. The flume has the dimensions of 0.4 m wide and depth and 12 m long. Generally 48 tests variety slopes of 0.0005 to 0.003 and discharges of 10 to 40 lit/s, were conducted. Velocity and the shear stress were measured by using an Acoustic Doppler Velocimeter (ADV. Two different types of ripples (parallel and flake ripples were used. The stage- discharge rating curve was then estimated in different ways, such as Einstein - Barbarvsa, shen and White et al. Results and Discussion: In order to investigateresult of the tests, were usedst atistical methods.White method as amaximum valueofα, RMSE, and average absolute error than other methods. Einstein method offitting the discharge under estimated. Evaluation of stage- discharge rating curve methods based on the obtained results from this research showed that Shen method had the highest accuracy for developing the

Age-Related Racial Disparity in Suicide Rates Among U.S. Youth

Science.gov (United States)

... May 30, 2018 Age-Related Racial Disparity in Youth Suicide Rates May 21, 2018 News by Year 2018 ... May 30, 2018 Age-Related Racial Disparity in Youth Suicide Rates May 21, 2018 News by Year 2018 ...

Application of the dose rate spectroscopy to the dose-to-curie conversion method using a NaI(Tl) detector

International Nuclear Information System (INIS)

JI, Young-Yong; Chung, Kun Ho; Kim, Chang-Jong; Kang, Mun Ja; Park, Sang Tae

2015-01-01

Dose rate spectroscopy is a very useful method to directly calculate the individual dose rate from the converted energy spectrum for the dose rate using the G-factor which is related to the used detector response function. A DTC conversion method for the estimation of the radioactivity based on the measured dose rate from the radioactive materials can then be modified into a simple equation using the dose rate spectroscopy. In order to make the method validation of the modified DTC conversion method, experimental verifications using a 3″φx3″ NaI(Tl) detector were conducted at the simple geometry of the point source located onto a detector and more complex geometries which mean the assay of the simulated radioactive material. In addition, the linearity about the results from the modified DTC conversion method was also estimated by increasing the distance between source positions and a detector to confirm the method validation in the energy, dose rate, and distance range of the gamma nuclides. - Highlights: • A modified DTC conversion method using the dose rate spectroscopy was established. • In-situ calibration factors were calculated from the MCNP simulation. • Radioactivities of the disk sources were accurately calculated using a modified DTC conversion method. • A modified DTC conversion method was applied to the assay of the radioactive material

Leak Rate Quantification Method for Gas Pressure Seals with Controlled Pressure Differential

Science.gov (United States)

Daniels, Christopher C.; Braun, Minel J.; Oravec, Heather A.; Mather, Janice L.; Taylor, Shawn C.

2015-01-01

An enhancement to the pressure decay leak rate method with mass point analysis solved deficiencies in the standard method. By adding a control system, a constant gas pressure differential across the test article was maintained. As a result, the desired pressure condition was met at the onset of the test, and the mass leak rate and measurement uncertainty were computed in real-time. The data acquisition and control system were programmed to automatically stop when specified criteria were met. Typically, the test was stopped when a specified level of measurement uncertainty was attained. Using silicone O-ring test articles, the new method was compared with the standard method that permitted the downstream pressure to be non-constant atmospheric pressure. The two methods recorded comparable leak rates, but the new method recorded leak rates with significantly lower measurement uncertainty, statistical variance, and test duration. Utilizing this new method in leak rate quantification, projects will reduce cost and schedule, improve test results, and ease interpretation between data sets.

Application of Statistical Methods of Rain Rate Estimation to Data From The TRMM Precipitation Radar

Science.gov (United States)

Meneghini, R.; Jones, J. A.; Iguchi, T.; Okamoto, K.; Liao, L.; Busalacchi, Antonio J. (Technical Monitor)

2000-01-01

The TRMM Precipitation Radar is well suited to statistical methods in that the measurements over any given region are sparsely sampled in time. Moreover, the instantaneous rain rate estimates are often of limited accuracy at high rain rates because of attenuation effects and at light rain rates because of receiver sensitivity. For the estimation of the time-averaged rain characteristics over an area both errors are relevant. By enlarging the space-time region over which the data are collected, the sampling error can be reduced. However. the bias and distortion of the estimated rain distribution generally will remain if estimates at the high and low rain rates are not corrected. In this paper we use the TRMM PR data to investigate the behavior of 2 statistical methods the purpose of which is to estimate the rain rate over large space-time domains. Examination of large-scale rain characteristics provides a useful starting point. The high correlation between the mean and standard deviation of rain rate implies that the conditional distribution of this quantity can be approximated by a one-parameter distribution. This property is used to explore the behavior of the area-time-integral (ATI) methods where fractional area above a threshold is related to the mean rain rate. In the usual application of the ATI method a correlation is established between these quantities. However, if a particular form of the rain rate distribution is assumed and if the ratio of the mean to standard deviation is known, then not only the mean but the full distribution can be extracted from a measurement of fractional area above a threshold. The second method is an extension of this idea where the distribution is estimated from data over a range of rain rates chosen in an intermediate range where the effects of attenuation and poor sensitivity can be neglected. The advantage of estimating the distribution itself rather than the mean value is that it yields the fraction of rain contributed by

A new method to determine reflex latency induced by high rate stimulation of the nervous system

Directory of Open Access Journals (Sweden)

Ilhan eKaracan

2014-07-01

Full Text Available High rate stimulations of the neuromuscular system, such as continuous whole body vibration, tonic vibration reflex and high frequency electrical stimulation, are used in the physiological research with an increasing interest. In these studies, the neuronal circuitries underlying the reflex responses remain unclear due to the problem of determining the exact reflex latencies. We present a novel cumulated average method to determine the reflex latency during high rate stimulation of the nervous system which was proven to be significantly more accurate than the classical method. The classical method, cumulant density analysis, reveals the relationship between the two synchronously recorded signals as a function of the lag between the signals. The comparison of new method with the classical technique and their relative accuracy was tested using a computer simulation. In the simulated signals the EMG response latency was constructed to be exactly 40 ms. The new method accurately indicated the value of the simulated reflex latency (40 ms. However, the classical method showed that the lag time between the simulated triggers and the simulated signals was 49 ms. Simulation results illustrated that the cumulated average method is a reliable and more accurate method compared with the classical method. We therefore suggest that the new cumulated average method is able to determine the high rate stimulation induced reflex latencies more accurately than the classical method.

Relative biological effectiveness of 125I seeds for low-dose-rate irradiation of PANC-1

International Nuclear Information System (INIS)

Wang Jidong; Wang Junjie; Zhuang Hongqing; Liao Anyan; Zhao Yong

2008-01-01

Objective: To investigate the relative biological effectiveness(RBE) of National Model 6711 125 I seeds and the response patterns of PANC-1 exposed to 125 I seeds irradiation. Methods: PANC-1 cells in exponential growth were irradiated at initial dose rate of 2.59 cGy/h in vitro and exposed to 1, 2, 4, 6, 8 and 10 Gy. Meanwhile, the other part of cells were exposed to the same doses by 60 Co at dose rate of 2.21 Gy/min. After irradiation, the cells were stained by trypan blue to measure the cellular mortality rate and to compare the changes along with plating times of 12, 24, 48 and 72 h after 4 Gy. The colonies were counted to obtain the plating efficiencies by colony-forming assay and the cell surviving faction was calculated to plot cell survival curves, and RBE of 125 I seeds relative to 60 Co was determined. Results: The cell death rate for continuous low- dose-rate (LDR) irradiation by 125 I seeds was greater than 60 Co at the same doses above or equal to 4 Gy. After 4 Gy irradiation, the cellular mortality rates were increased with times. The difference was significant between 125 I seeds and 60 Co. The survival fractions of 125 I were lower than those of 60 Co, and the RBE of 125 I relative to 60 Co was determined to be 1.45. Conclusion: The cell-killing effects for continuous low-dose-rate (LDR) irradiation by 125 I seeds are greater than acute high-dose-rate of 60 Co. (authors)

Heart rate-based lactate minimum test: a reproducible method.

NARCIS (Netherlands)

Strupler, M.; Muller, G.; Perret, C.

2009-01-01

OBJECTIVE: To find the individual intensity for aerobic endurance training, the lactate minimum test (LMT) seems to be a promising method. LMTs described in the literature consist of speed or work rate-based protocols, but for training prescription in daily practice mostly heart rate is used. The

[The effect of assertiveness training on communication related factors and personnel turnover rate among hospital nurses].

Science.gov (United States)

Kang, Myung Ja; Lee, Haejung

2006-08-01

The purpose of this study was to investigate the effects of assertiveness training on nurses' assertive behaviors, interpersonal relations, communication conflicts, conflict management style and personnel turnover rate. A non-equivalent control group pretest-posttest design was used in this study. Nurses were assigned into the experimental or control groups, each consisting of 39 nurses. Data was collected between January to March 2004. An 'Assertiveness Training Program' for Nurses developed by Park was used for the study. To emphasize assertiveness practice, 5 practice sessions utilizing ABCDE principles were added to Park's program. To examine the effects of the program, differences between the two groups in assertive behaviors, interpersonal relations, communication conflicts, conflict management style and personnel turnover rate were analyzed using ANCOVA. The assertiveness training was effective in improving the nurses' assertiveness behaviors, but was not effective in improving interpersonal relations, reducing the subjects' communication conflicts, changing the conflict management style or reducing their personnel turnover rate. There have been many studies about factors affecting nurses' personnel turnover rates, but few have been done about methods of intervention to reduce the personnel turnover rate. Thus, this study provides a significant contribution in attempting such an intervention from nursing management perspectives.

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers procedures for measuring reaction rates by the activation reactions 46Ti(n,p) 46Sc + 47Ti(n, np)46Sc. Note 1—Since the cross section for the (n,np) reaction is relatively small for energies less than 12 MeV and is not easily distinguished from that of the (n,p) reaction, this test method will refer to the (n,p) reaction only. 1.2 The reaction is useful for measuring neutrons with energies above approximately 4.4 MeV and for irradiation times up to about 250 days (for longer irradiations, see Practice E 261). 1.3 With suitable techniques, fission-neutron fluence rates above 109 cm–2·s–1 can be determined. However, in the presence of a high thermal-neutron fluence rate, 46Sc depletion should be investigated. 1.4 Detailed procedures for other fast-neutron detectors are referenced in Practice E 261. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all...

Flow rate-pressure drop relation for deformable shallow microfluidic channels

Science.gov (United States)

Christov, Ivan C.; Cognet, Vincent; Shidhore, Tanmay C.; Stone, Howard A.

2018-04-01

Laminar flow in devices fabricated from soft materials causes deformation of the passage geometry, which affects the flow rate--pressure drop relation. For a given pressure drop, in channels with narrow rectangular cross-section, the flow rate varies as the cube of the channel height, so deformation can produce significant quantitative effects, including nonlinear dependence on the pressure drop [{Gervais, T., El-Ali, J., G\\"unther, A. \\& Jensen, K.\\ F.}\\ 2006 Flow-induced deformation of shallow microfluidic channels.\\ \\textit{Lab Chip} \\textbf{6}, 500--507]. Gervais et. al. proposed a successful model of the deformation-induced change in the flow rate by heuristically coupling a Hookean elastic response with the lubrication approximation for Stokes flow. However, their model contains a fitting parameter that must be found for each channel shape by performing an experiment. We present a perturbation approach for the flow rate--pressure drop relation in a shallow deformable microchannel using the theory of isotropic quasi-static plate bending and the Stokes equations under a lubrication approximation (specifically, the ratio of the channel's height to its width and of the channel's height to its length are both assumed small). Our result contains no free parameters and confirms Gervais et. al.'s observation that the flow rate is a quartic polynomial of the pressure drop. The derived flow rate--pressure drop relation compares favorably with experimental measurements.

Evaluation method of gas leakage rate from transportation casks of radioactive materials (gas leakage rates from scratches on O-ring surface)

International Nuclear Information System (INIS)

Aritomi, Masanori; Li Ninghua; Asano, Ryoji; Kawa, Tsunemichi

2004-01-01

A sealing function is essential for transportation and/or storage casks of radioactive materials under both normal and accidental operating conditions in order to prevent radioactive materials from being released into the environment. In the safety analysis report, the release rate of radioactive materials into the environment is evaluated using the correlations specified in the ANSI N14.5, 1987. The purposes of the work are to reveal the underlying problems on the correlations specified in the ANSI N14.5 related to gas leakage rates from a scratch on O-ring surface and from multi-leak paths, to offer a data base to study the evaluation method of the leakage rate and to propose the evaluation method. In this paper, the following insights were obtained and clarified: 1. If a characteristic value of a leak path is defined as D 4 /a ('D' is the diameter and 'a' is the length), a scratch on the O-ring surface can be evaluated as a circular tube. 2. It is proper to use the width of O-ring groove on the flange as the leak path length for elastomer O-rings. 3. Gas leakage rates from multi leak paths of the transportation cask can be evaluated in the same manner as a single leak path if an effective D4/a is introduced. (author)

An application of the variable-r method to subpopulation growth rates in a 19th century agricultural population

Directory of Open Access Journals (Sweden)

Corey Sparks

2009-07-01

Full Text Available This paper presents an analysis of the differential growth rates of the farming and non-farming segments of a rural Scottish community during the 19th and early 20th centuries using the variable-r method allowing for net migration. Using this method, I find that the farming population of Orkney, Scotland, showed less variability in their reproduction and growth rates than the non-farming population during a period of net population decline. I conclude by suggesting that the variable-r method can be used in general cases where the relative growth of subpopulations or subpopulation reproduction is of interest.

The assessment of cognitive errors using an observer-rated method.

Science.gov (United States)

Drapeau, Martin

2014-01-01

Cognitive Errors (CEs) are a key construct in cognitive behavioral therapy (CBT). Integral to CBT is that individuals with depression process information in an overly negative or biased way, and that this bias is reflected in specific depressotypic CEs which are distinct from normal information processing. Despite the importance of this construct in CBT theory, practice, and research, few methods are available to researchers and clinicians to reliably identify CEs as they occur. In this paper, the author presents a rating system, the Cognitive Error Rating Scale, which can be used by trained observers to identify and assess the cognitive errors of patients or research participants in vivo, i.e., as they are used or reported by the patients or participants. The method is described, including some of the more important rating conventions to be considered when using the method. This paper also describes the 15 cognitive errors assessed, and the different summary scores, including valence of the CEs, that can be derived from the method.

Precise method for correcting count-rate losses in scintillation cameras

International Nuclear Information System (INIS)

Madsen, M.T.; Nickles, R.J.

1986-01-01

Quantitative studies performed with scintillation detectors often require corrections for lost data because of the finite resolving time of the detector. Methods that monitor losses by means of a reference source or pulser have unacceptably large statistical fluctuations associated with their correction factors. Analytic methods that model the detector as a paralyzable system require an accurate estimate of the system resolving time. Because the apparent resolving time depends on many variables, including the window setting, source distribution, and the amount of scattering material, significant errors can be introduced by relying on a resolving time obtained from phantom measurements. These problems can be overcome by curve-fitting the data from a reference source to a paralyzable model in which the true total count rate in the selected window is estimated from the observed total rate. The resolving time becomes a free parameter in this method which is optimized to provide the best fit to the observed reference data. The fitted curve has the inherent accuracy of the reference source method with the precision associated with the observed total image count rate. Correction factors can be simply calculated from the ratio of the true reference source rate and the fitted curve. As a result, the statistical uncertainty of the data corrected by this method is not significantly increased

A Bayes linear Bayes method for estimation of correlated event rates.

Science.gov (United States)

Quigley, John; Wilson, Kevin J; Walls, Lesley; Bedford, Tim

2013-12-01

Typically, full Bayesian estimation of correlated event rates can be computationally challenging since estimators are intractable. When estimation of event rates represents one activity within a larger modeling process, there is an incentive to develop more efficient inference than provided by a full Bayesian model. We develop a new subjective inference method for correlated event rates based on a Bayes linear Bayes model under the assumption that events are generated from a homogeneous Poisson process. To reduce the elicitation burden we introduce homogenization factors to the model and, as an alternative to a subjective prior, an empirical method using the method of moments is developed. Inference under the new method is compared against estimates obtained under a full Bayesian model, which takes a multivariate gamma prior, where the predictive and posterior distributions are derived in terms of well-known functions. The mathematical properties of both models are presented. A simulation study shows that the Bayes linear Bayes inference method and the full Bayesian model provide equally reliable estimates. An illustrative example, motivated by a problem of estimating correlated event rates across different users in a simple supply chain, shows how ignoring the correlation leads to biased estimation of event rates. © 2013 Society for Risk Analysis.

An SEU rate prediction method for microprocessors of space applications

International Nuclear Information System (INIS)

Gao Jie; Li Qiang

2012-01-01

In this article,the relationship between static SEU (Single Event Upset) rate and dynamic SEU rate in microprocessors for satellites is studied by using process duty cycle concept and fault injection technique. The results are compared to in-orbit flight monitoring data. The results show that dynamic SEU rate by using process duty cycle can estimate in-orbit SEU rate of microprocessor reasonable; and the fault injection technique is a workable method to estimate SEU rate. (authors)

Magnet-related injury rates in children: a single hospital experience.

Science.gov (United States)

Agbo, Chioma; Lee, Lois; Chiang, Vincent; Landscahft, Assaf; Kimia, Tomer; Monuteaux, Michael C; Kimia, Amir A

2013-07-01

The ingestion of multiple magnets simultaneously or the placement of magnets in both nares can lead to serious injury resulting from the attraction of the magnets across the tissues. The impact of mandatory standards for toys containing magnets has not been thoroughly investigated. The aim of the present study was to describe the emergency department (ED) visit rate for magnet-related injuries. We performed a retrospective study of children evaluated for magnet-related injuries from 1995 to 2012 in an urban tertiary care pediatric ED. We identified cases using a computerized text-search methodology followed by manual chart review. We included children evaluated for magnet ingestion or impaction in the ears, nose, vagina, or rectum. We assessed the type and number of magnets as well as management and required interventions. A Poisson regression model was used to analyze rates of injury over time. We identified 112 cases of magnet injuries. The median patient age was 6 years (IQR 3.5, 10), and 54% were male. Compared to before 2006, the rate for all magnet-related injuries in 2007-2012 (incidence rate ratio 3.44; 95% confidence interval 2.3-5.11) as well as multiple magnet-related injuries (incidence rate ratio 7.54; 95% confidence interval 3.51-16.19) increased. Swallowed magnets accounted for 86% of the injuries. Thirteen patients had endoscopy performed for magnet removal (12%), and 4 (4%) had a surgical intervention. Magnets from toys account for the majority of the injuries. The number of ED visits for magnet-related injuries in children may be rising and are underreported, with an increase in the proportion of multiple magnets involvement. In our case series, mandatory standard for toys had no mitigating effect.

A comparative study of different methods for calculating electronic transition rates

Science.gov (United States)

Kananenka, Alexei A.; Sun, Xiang; Schubert, Alexander; Dunietz, Barry D.; Geva, Eitan

2018-03-01

We present a comprehensive comparison of the following mixed quantum-classical methods for calculating electronic transition rates: (1) nonequilibrium Fermi's golden rule, (2) mixed quantum-classical Liouville method, (3) mean-field (Ehrenfest) mixed quantum-classical method, and (4) fewest switches surface-hopping method (in diabatic and adiabatic representations). The comparison is performed on the Garg-Onuchic-Ambegaokar benchmark charge-transfer model, over a broad range of temperatures and electronic coupling strengths, with different nonequilibrium initial states, in the normal and inverted regimes. Under weak to moderate electronic coupling, the nonequilibrium Fermi's golden rule rates are found to be in good agreement with the rates obtained via the mixed quantum-classical Liouville method that coincides with the fully quantum-mechanically exact results for the model system under study. Our results suggest that the nonequilibrium Fermi's golden rule can serve as an inexpensive yet accurate alternative to Ehrenfest and the fewest switches surface-hopping methods.

Survey of methods for the rating of psychiatric impairment in Australia.

Science.gov (United States)

Mendelson, George

2004-05-01

One of the enduring clinical issues in the assessment of plaintiffs in personal injury and workers' compensation claims, as well as applicants for social security and disablement benefits, is that of the evaluation of impairment and work incapacity. Many writers on this topic confuse the concepts of impairment and disability, and similar confusion is reflected in a number of the rating methods that purport to evaluate impairment but in reality assess disability. In Australia there are 20 distinct statutory schemes for workers' compensation, motor accident compensation, and social security and other benefits, which utilise a variety of methods for the rating of psychiatric impairment. Recent legislative changes designed to restrict access to personal injury compensation at common law, which in two Australian State jurisdictions require the use of impairment rating scales, also specify the rating methods to be used in the assessment of psychiatric impairment. This article discusses the concepts of impairment and disability as defined by the World Health Organisation, and reviews the various methods for the rating of psychiatric impairment that are specified by statute in the federal and State jurisdictions in Australia.

Female literacy rate is a better predictor of birth rate and infant mortality rate in India

Directory of Open Access Journals (Sweden)

Suman Saurabh

2013-01-01

Full Text Available Background: Educated women are known to take informed reproductive and healthcare decisions. These result in population stabilization and better infant care reflected by lower birth rates and infant mortality rates (IMRs, respectively. Materials and Methods: Our objective was to study the relationship of male and female literacy rates with crude birth rates (CBRs and IMRs of the states and union territories (UTs of India. The data were analyzed using linear regression. CBR and IMR were taken as the dependent variables; while the overall literacy rates, male, and female literacy rates were the independent variables. Results: CBRs were inversely related to literacy rates (slope parameter = -0.402, P < 0.001. On multiple linear regression with male and female literacy rates, a significant inverse relationship emerged between female literacy rate and CBR (slope = -0.363, P < 0.001, while male literacy rate was not significantly related to CBR (P = 0.674. IMR of the states were also inversely related to their literacy rates (slope = -1.254, P < 0.001. Multiple linear regression revealed a significant inverse relationship between IMR and female literacy (slope = -0.816, P = 0.031, whereas male literacy rate was not significantly related (P = 0.630. Conclusion: Female literacy is relatively highly important for both population stabilization and better infant health.

Seasonal Variations of Indoor Microbial Exposures and Their Relation to Temperature, Relative Humidity, and Air Exchange Rate

DEFF Research Database (Denmark)

Frankel, Mika; Bekö, Gabriel; Timm, Michael

2012-01-01

with temperature, relative humidity, and air exchange rates in Danish homes. Airborne inhalable dust was sampled in five Danish homes throughout the four seasons of 1 year (indoors, n = 127; outdoors, n = 37). Measurements included culturable fungi and bacteria, endotoxin, N-acetyl-beta-d-glucosaminidase, total...... inflammatory potential, particles (0.75 to 15 μm), temperature, relative humidity, and air exchange rates. Significant seasonal variation was found for all indoor microbial exposures, excluding endotoxin. Indoor fungi peaked in summer (median, 235 CFU/m3) and were lowest in winter (median, 26 CFU/m3). Indoor...... of inhalable dust and number of particles. Temperature and air exchange rates were positively associated with fungi and N-acetyl-beta-d-glucosaminidase and negatively with bacteria and the total inflammatory potential. Although temperature, relative humidity, and air exchange rates were significantly...

An alternative radiometric method for calculating the sedimentation rates: Application to an intertidal region (SW of Spain)

Energy Technology Data Exchange (ETDEWEB)

Ligero, R.A., E-mail: rufino.ligero@uca.e [Departamento de Fisica Aplicada, Universidad de Cadiz, 11510 Puerto Real, Cadiz (Spain); Casas-Ruiz, M. [Departamento de Fisica Aplicada, Universidad de Cadiz, 11510 Puerto Real, Cadiz (Spain); Barrera, M. [Departamento de Medio Ambiente, CIEMAT, Madrid 28040 (Spain); Barbero, L. [Departamento de Ciencias de la Tierra, Universidad de Cadiz, 11510 Puerto Real (Spain); Melendez, M.J. [Departamento de Fisica Aplicada, Universidad de Cadiz, 11510 Puerto Real, Cadiz (Spain)

2010-09-15

A new method using the inventory determined for the activity of the radionuclide {sup 137}Cs, coming from global radioactive fallout has been utilised to calculate the sedimentation rates. The method has been applied in a wide intertidal region in the Bay of Cadiz Natural Park (SW Spain). The sedimentation rates estimated by the {sup 137}Cs inventory method ranged from 0.26 cm/year to 1.72 cm/year. The average value of the sedimentation rate obtained is 0.59 cm/year, and this rate has been compared with those resulting from the application of the {sup 210}Pb dating technique. A good agreement between the two procedures has been found. From the study carried out, it has been possible for the first time, to draw a map of sedimentation rates for this zone where numerous physico-chemical, oceanographic and ecological studies converge, since it is situated in a region of great environmental interest. This area, which is representative of common environmental coastal scenarios, is particularly sensitive to perturbations related to climate change, and the results of the study will allow to make short and medium term evaluations of this change.

Identification of strain-rate and thermal sensitive material model with an inverse method

Directory of Open Access Journals (Sweden)

Peroni M.

2010-06-01

Full Text Available This paper describes a numerical inverse method to extract material strength parameters from the experimental data obtained via mechanical tests at different strainrates and temperatures. It will be shown that this procedure is particularly useful to analyse experimental results when the stress-strain fields in the specimen cannot be correctly described via analytical models. This commonly happens in specimens with no regular shape, in specimens with a regular shape when some instability phenomena occur (for example the necking phenomena in tensile tests that create a strongly heterogeneous stress-strain fields or in dynamic tests (where the strain-rate field is not constant due to wave propagation phenomena. Furthermore the developed procedure is useful to take into account thermal phenomena generally affecting high strain-rate tests due to the adiabatic overheating related to the conversion of plastic work. The method presented requires strong effort both from experimental and numerical point of view, anyway it allows to precisely identify the parameters of different material models. This could provide great advantages when high reliability of the material behaviour is necessary. Applicability of this method is particularly indicated for special applications in the field of aerospace engineering, ballistic, crashworthiness studies or particle accelerator technologies, where materials could be submitted to strong plastic deformations at high-strain rate in a wide range of temperature. Thermal softening effect has been investigated in a temperature range between 20°C and 1000°C.

Success rate of two different methods of ilioinguinal-iliohypogastric ...

African Journals Online (AJOL)

Background: The ilioinguinal-iliohypogastric (ILIH) nerve block is a safe, effective, and easy to perform in order to provide analgesia for a variety of inguinal surgical procedures in pediatric patients. A relatively high failure rate of 10%-25% has been reported, even in experienced hands. It is assumed that this high failure rate ...

Sediment spatial distribution evaluated by three methods and its relation to some soil properties

Energy Technology Data Exchange (ETDEWEB)

Bacchi, O O.S. . [Centro de Energia Nuclear na Agricultura-CENA/USP, Laboratorio de Fisica do Solo, Piracicaba, SP (Brazil); Reichardt, K [Centro de Energia Nuclear na Agricultura-CENA/USP, Laboratorio de Fisica do Solo, Piracicaba, SP (Brazil); Departamento de Ciencias Exatas, Escola Superior de Agricultura ' Luiz de Queiroz' ESALQ/USP, Piracicaba, SP (Brazil); Sparovek, G [Departamento de Solos e Nutricao de Plantas, Escola Superior de Agricultura ' Luiz de Queiroz' ESALQ/USP, Piracicaba, SP (Brazil)

2003-02-15

An investigation of rates and spatial distribution of sediments on an agricultural field cultivated with sugarcane was undertaken using the {sup 137}Cs technique, USLE and WEPP models. The study was carried out on the Ceveiro watershed of the Piracicaba river basin, state of Sao Paulo, Brazil, experiencing severe soil degradation due to soil erosion. The objectives of the study were to compare the spatial distribution of sediments evaluated by the three methods and its relation to some soil properties. Erosion and sedimentation rates and their spatial distribution estimated by the three methods were completely different. Although not able to show sediment deposition, the spatial distribution of erosion rates evaluated by USLE presented the best correlation with other studied soil properties. (author)

Sedimentation rate estimates in Sorsogon Bay, Philippines using 210Pb method

International Nuclear Information System (INIS)

Madrid, Jordan F.; Sta. Maria, Efren J.; Olivares, Ryan U.; Aniago, Ryan Joseph; Asa Anie Day DC; Dayaon, Jennyvi P.; Bulos, Adelina DM; Sombrito, Elvira Z.

2011-01-01

Sorsogon Bay has experienced a long history of recurring harmful algal blooms over the past few years. In an attempt to establish a chronology of events in the sediment layer, lead-210 ( 210 Pb) dating method has been utilized in estimating sedimentation rates from three selected areas along the bay. Based on the unsupported 210 Pb data and by applying the Constant Initial Concentration (CIC) model, the calculated sedimentation rates were 0.8, 1.3 and 1.8 cm yr 1 for sediment cores collected near the coastal areas of Castilla (SO-01), Sorsogon City (SO-07) and Cadacan River (SO-03), respectively. High sedimentation rates were measured in sediment cores believed to be affected from frequent volcanic ash releases and from areas near human settlement combined with intensive farming and agricultural activities. The collected sediments exhibited non-uniform down core values of dry bulk density and moisture content. This variation in measurements may indicate the general quality and composition of the sediment samples, i.e., amount of organic matter and grain size. The calculated sedimentation rates obtained provided an overview of the sedimentation processes and reflect the land use pattern around the bay which may help in understanding the history and distribution of materials and nutrient input relative to the occurrence of harmful algal bloom in the sediment columns. (author)

Estimating diversification rates for higher taxa: BAMM can give problematic estimates of rates and rate shifts.

Science.gov (United States)

Meyer, Andreas L S; Wiens, John J

2018-01-01

Estimates of diversification rates are invaluable for many macroevolutionary studies. Recently, an approach called BAMM (Bayesian Analysis of Macro-evolutionary Mixtures) has become widely used for estimating diversification rates and rate shifts. At the same time, several articles have concluded that estimates of net diversification rates from the method-of-moments (MS) estimators are inaccurate. Yet, no studies have compared the ability of these two methods to accurately estimate clade diversification rates. Here, we use simulations to compare their performance. We found that BAMM yielded relatively weak relationships between true and estimated diversification rates. This occurred because BAMM underestimated the number of rates shifts across each tree, and assigned high rates to small clades with low rates. Errors in both speciation and extinction rates contributed to these errors, showing that using BAMM to estimate only speciation rates is also problematic. In contrast, the MS estimators (particularly using stem group ages), yielded stronger relationships between true and estimated diversification rates, by roughly twofold. Furthermore, the MS approach remained relatively accurate when diversification rates were heterogeneous within clades, despite the widespread assumption that it requires constant rates within clades. Overall, we caution that BAMM may be problematic for estimating diversification rates and rate shifts. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Benchmark calculations for evaluation methods of gas volumetric leakage rate

International Nuclear Information System (INIS)

Asano, R.; Aritomi, M.; Matsuzaki, M.

1998-01-01

A containment function of radioactive materials transport casks is essential for safe transportation to prevent the radioactive materials from being released into environment. Regulations such as IAEA standard determined the limit of radioactivity to be released. Since is not practical for the leakage tests to measure directly the radioactivity release from a package, as gas volumetric leakages rates are proposed in ANSI N14.5 and ISO standards. In our previous works, gas volumetric leakage rates for several kinds of gas from various leaks were measured and two evaluation methods, 'a simple evaluation method' and 'a strict evaluation method', were proposed based on the results. The simple evaluation method considers the friction loss of laminar flow with expansion effect. The strict evaluating method considers an exit loss in addition to the friction loss. In this study, four worked examples were completed for on assumed large spent fuel transport cask (Type B Package) with wet or dry capacity and at three transport conditions; normal transport with intact fuels or failed fuels, and an accident in transport. The standard leakage rates and criteria for two kinds of leak test were calculated for each example by each evaluation method. The following observations are made based upon the calculations and evaluations: the choked flow model of ANSI method greatly overestimates the criteria for tests ; the laminar flow models of both ANSI and ISO methods slightly overestimate the criteria for tests; the above two results are within the design margin for ordinary transport condition and all methods are useful for the evaluation; for severe condition such as failed fuel transportation, it should pay attention to apply a choked flow model of ANSI method. (authors)

Signs of oral dryness in relation to salivary flow rate, pH, buffering capacity and dry mouth complaints

Directory of Open Access Journals (Sweden)

Farsi Najat MA

2007-11-01

Full Text Available Abstract Background This study aimed to investigate the signs of oral dryness in relation to different salivary variables and to correlate subjective complaints of oral dryness with salivary flow rate. Methods 312 unmedicated healthy individuals belonging to three age groups, (6–11, 12–17, and 18–40 years were examined clinically for signs of oral dryness. Resting and stimulated saliva were collected to determine flow rate, pH and buffering capacity. A questionnaire was used to obtain information on subjective sensation of dry mouth. Results Dry lip and dry mucosa were present in 37.5% and 3.2% of the sample respectively. The proportion of subjects who complained of oral dryness (19% showed a stimulated salivary flow rate significantly lower than non complainers. Dry lip was significantly related to low resting flow rate but pH and buffering capacity did not show any significant relation to dry lip. Dry mucosa was not related to any of the above mentioned parameters. Conclusion The finding that the stimulated salivary flow rate was reduced in subjects complaining of dry mouth is of great clinical relevance, since the reduction is expected to be reflected in compromising various salivary functions.

Novel driver method to improve ordinary CCD frame rate for high-speed imaging diagnosis

Energy Technology Data Exchange (ETDEWEB)

Luo, Tong-Ding, E-mail: snuohui@126.com; Li, Bin-Kang; Yang, Shao-Hua; Guo, Ming-An; Yan, Ming

2016-06-21

The use of ordinary Charge-coupled-Device (CCD) imagers for the analysis of fast physical phenomenon is restricted because of the low-speed performance resulting from their long output times. Even though the form of Intensified-CCD (ICCD), coupled with a gated image intensifier, has extended their use for high speed imaging, the deficiency remains to be solved that ICDD could record only one image in a single shot. This paper presents a novel driver method designed to significantly improve the ordinary interline CCD burst frame rate for high-speed photography. This method is based on the use of vertical registers as storage, so that a small number of additional frames comprised of reduced-spatial-resolution images obtained via a specific sampling operation can be buffered. Hence, the interval time of the received series of images is related to the exposure and vertical transfer times only and, thus, the burst frame rate can be increased significantly. A prototype camera based on this method is designed as part of this study, exhibiting a burst rate of up to 250,000 frames per second (fps) and a capacity to record three continuous images. This device exhibits a speed enhancement of approximately 16,000 times compared with the conventional speed, with a spatial resolution reduction of only 1/4.

Estimating Maternal Mortality Rate Using Sisterhood Methods in ...

African Journals Online (AJOL)

... maternal and child morbidity and mortality, which could serve as a surveillance strategy to identify the magnitude of the problem and to mobilize resources to areas where the problems are most prominent for adequate control. KEY WORDS: Maternal Mortality Rate, Sisterhood Method. Highland Medical Research Journal ...

A method to assign failure rates for piping reliability assessments

International Nuclear Information System (INIS)

Gamble, R.M.; Tagart, S.W. Jr.

1991-01-01

This paper reports on a simplified method that has been developed to assign failure rates that can be used in reliability and risk studies of piping. The method can be applied on a line-by-line basis by identifying line and location specific attributes that can lead to piping unreliability from in-service degradation mechanisms and random events. A survey of service experience for nuclear piping reliability also was performed. The data from this survey provides a basis for identifying in-service failure attributes and assigning failure rates for risk and reliability studies

A method for projecting age-specific mortality rates for certain causes of death

International Nuclear Information System (INIS)

Leggett, R.W.; Crawford, D.J.

1981-01-01

A method is presented for projecting mortality rates for certain causes on the basis of observed rates during past years. This method arose from a study of trends in age-specific mortality rates for respiratory cancers, and for heuristic purposes it is shown how the method can be developed from certain theories of cancer induction. However, the method is applicable in the more common situation in which the underlying physical processes cannot be modeled with any confidence but the mortality rates are approximable over short time intervals by functions of the form a exp(bt), where b may vary in a continuous, predictable fashion as the time interval is varied. It appears from applications to historical data that this projection method is in some cases a substantial improvement over conventional curve-fitting methods and often uncovers trends which are not from observed data

DNA barcoding of recently diverged species: relative performance of matching methods.

Directory of Open Access Journals (Sweden)

Robin van Velzen

Full Text Available Recently diverged species are challenging for identification, yet they are frequently of special interest scientifically as well as from a regulatory perspective. DNA barcoding has proven instrumental in species identification, especially in insects and vertebrates, but for the identification of recently diverged species it has been reported to be problematic in some cases. Problems are mostly due to incomplete lineage sorting or simply lack of a 'barcode gap' and probably related to large effective population size and/or low mutation rate. Our objective was to compare six methods in their ability to correctly identify recently diverged species with DNA barcodes: neighbor joining and parsimony (both tree-based, nearest neighbor and BLAST (similarity-based, and the diagnostic methods DNA-BAR, and BLOG. We analyzed simulated data assuming three different effective population sizes as well as three selected empirical data sets from published studies. Results show, as expected, that success rates are significantly lower for recently diverged species (∼75% than for older species (∼97% (P<0.00001. Similarity-based and diagnostic methods significantly outperform tree-based methods, when applied to simulated DNA barcode data (P<0.00001. The diagnostic method BLOG had highest correct query identification rate based on simulated (86.2% as well as empirical data (93.1%, indicating that it is a consistently better method overall. Another advantage of BLOG is that it offers species-level information that can be used outside the realm of DNA barcoding, for instance in species description or molecular detection assays. Even though we can confirm that identification success based on DNA barcoding is generally high in our data, recently diverged species remain difficult to identify. Nevertheless, our results contribute to improved solutions for their accurate identification.

Relative Citation Ratio (RCR): A New Metric That Uses Citation Rates to Measure Influence at the Article Level.

Science.gov (United States)

Hutchins, B Ian; Yuan, Xin; Anderson, James M; Santangelo, George M

2016-09-01

Despite their recognized limitations, bibliometric assessments of scientific productivity have been widely adopted. We describe here an improved method to quantify the influence of a research article by making novel use of its co-citation network to field-normalize the number of citations it has received. Article citation rates are divided by an expected citation rate that is derived from performance of articles in the same field and benchmarked to a peer comparison group. The resulting Relative Citation Ratio is article level and field independent and provides an alternative to the invalid practice of using journal impact factors to identify influential papers. To illustrate one application of our method, we analyzed 88,835 articles published between 2003 and 2010 and found that the National Institutes of Health awardees who authored those papers occupy relatively stable positions of influence across all disciplines. We demonstrate that the values generated by this method strongly correlate with the opinions of subject matter experts in biomedical research and suggest that the same approach should be generally applicable to articles published in all areas of science. A beta version of iCite, our web tool for calculating Relative Citation Ratios of articles listed in PubMed, is available at https://icite.od.nih.gov.

Relative Citation Ratio (RCR: A New Metric That Uses Citation Rates to Measure Influence at the Article Level.

Directory of Open Access Journals (Sweden)

B Ian Hutchins

2016-09-01

Full Text Available Despite their recognized limitations, bibliometric assessments of scientific productivity have been widely adopted. We describe here an improved method to quantify the influence of a research article by making novel use of its co-citation network to field-normalize the number of citations it has received. Article citation rates are divided by an expected citation rate that is derived from performance of articles in the same field and benchmarked to a peer comparison group. The resulting Relative Citation Ratio is article level and field independent and provides an alternative to the invalid practice of using journal impact factors to identify influential papers. To illustrate one application of our method, we analyzed 88,835 articles published between 2003 and 2010 and found that the National Institutes of Health awardees who authored those papers occupy relatively stable positions of influence across all disciplines. We demonstrate that the values generated by this method strongly correlate with the opinions of subject matter experts in biomedical research and suggest that the same approach should be generally applicable to articles published in all areas of science. A beta version of iCite, our web tool for calculating Relative Citation Ratios of articles listed in PubMed, is available at https://icite.od.nih.gov.

Correction to the count-rate detection limit and sample/blank time-allocation methods

International Nuclear Information System (INIS)

Alvarez, Joseph L.

2013-01-01

A common form of count-rate detection limits contains a propagation of uncertainty error. This error originated in methods to minimize uncertainty in the subtraction of the blank counts from the gross sample counts by allocation of blank and sample counting times. Correct uncertainty propagation showed that the time allocation equations have no solution. This publication presents the correct form of count-rate detection limits. -- Highlights: •The paper demonstrated a proper method of propagating uncertainty of count rate differences. •The standard count-rate detection limits were in error. •Count-time allocation methods for minimum uncertainty were in error. •The paper presented the correct form of the count-rate detection limit. •The paper discussed the confusion between count-rate uncertainty and count uncertainty

On a method of evaluation of failure rate of equipment and pipings under excess-earthquake loadings

International Nuclear Information System (INIS)

Shibata, H.; Okamura, H.

1979-01-01

This paper deals with a method of evaluation of the failure rate of equipment and pipings in nuclear power plants under an earthquake which is exceeding the design basis earthquake. If we put the ratio of the maximum ground acceleration of an earthquake to that of the design basis earthquake as n, then the failure rate or the probability of failure is the function of n as p(n). The purpose of this study is establishing the procedure of evaluation of the relation n vs. p(n). (orig.)

Personality Stability from Childhood to Midlife: Relating Teachers’ Assessments in Elementary School to Observer- and Self-Ratings 40 Years Later

Science.gov (United States)

Edmonds, Grant W.; Goldberg, Lewis R.; Hampson, Sarah E.; Barckley, Maureen

2013-01-01

We report on the longitudinal stability of personality traits across an average 40 years in the Hawaii Personality and Health Cohort relating childhood teacher assessments of personality to adult self- and observer- reports. Stabilities based on self-ratings in adulthood were compared to those measured by the Structured Interview for the Five-Factor Model (SIFFM; Trull & Widiger, 1997), and trait ratings completed by interviewers. Although convergence between self-reports and observer-ratings was modest, childhood traits demonstrated similar levels of stability across methods in adulthood. Extraversion and Conscientiousness generally showed higher stabilities, whereas Neuroticism showed none. For Agreeableness and Intellect/Openness, stability was highest when assessed with observer-ratings. These findings are discussed in terms of differences in trait evaluativeness and observability across measurement methods. PMID:24039315

Are Competitive Materialism and Female Employment Related to International Homicide Rate?

Science.gov (United States)

Chon, Don Soo

2017-04-01

The institutional anomie theory is a proposal that states competitive materialism, an intense cultural pressure for economic success at any costs, and increased female employment may be related to a high homicide rate. The current work tested this proposition by utilizing homicide data collected from 45 developed and developing countries. Regression results did not support the proposition. Competitive materialism and female employment were not significantly related to the cross-national variation of homicide rates.

Seasonal variations of indoor microbial exposures and their relation to temperature, relative humidity, and air exchange rate.

Science.gov (United States)

Frankel, Mika; Bekö, Gabriel; Timm, Michael; Gustavsen, Sine; Hansen, Erik Wind; Madsen, Anne Mette

2012-12-01

Indoor microbial exposure has been related to adverse pulmonary health effects. Exposure assessment is not standardized, and various factors may affect the measured exposure. The aim of this study was to investigate the seasonal variation of selected microbial exposures and their associations with temperature, relative humidity, and air exchange rates in Danish homes. Airborne inhalable dust was sampled in five Danish homes throughout the four seasons of 1 year (indoors, n = 127; outdoors, n = 37). Measurements included culturable fungi and bacteria, endotoxin, N-acetyl-beta-d-glucosaminidase, total inflammatory potential, particles (0.75 to 15 μm), temperature, relative humidity, and air exchange rates. Significant seasonal variation was found for all indoor microbial exposures, excluding endotoxin. Indoor fungi peaked in summer (median, 235 CFU/m(3)) and were lowest in winter (median, 26 CFU/m(3)). Indoor bacteria peaked in spring (median, 2,165 CFU/m(3)) and were lowest in summer (median, 240 CFU/m(3)). Concentrations of fungi were predominately higher outdoors than indoors, whereas bacteria, endotoxin, and inhalable dust concentrations were highest indoors. Bacteria and endotoxin correlated with the mass of inhalable dust and number of particles. Temperature and air exchange rates were positively associated with fungi and N-acetyl-beta-d-glucosaminidase and negatively with bacteria and the total inflammatory potential. Although temperature, relative humidity, and air exchange rates were significantly associated with several indoor microbial exposures, they could not fully explain the observed seasonal variations when tested in a mixed statistical model. In conclusion, the season significantly affects indoor microbial exposures, which are influenced by temperature, relative humidity, and air exchange rates.

Self-assembling membranes and related methods thereof

Science.gov (United States)

Capito, Ramille M; Azevedo, Helena S; Stupp, Samuel L

2013-08-20

The present invention relates to self-assembling membranes. In particular, the present invention provides self-assembling membranes configured for securing and/or delivering bioactive agents. In some embodiments, the self-assembling membranes are used in the treatment of diseases, and related methods (e.g., diagnostic methods, research methods, drug screening).

Meta-analytic methods for pooling rates when follow-up duration varies: a case study

Directory of Open Access Journals (Sweden)

Wolf Fredric M

2004-07-01

Full Text Available Abstract Background Meta-analysis can be used to pool rate measures across studies, but challenges arise when follow-up duration varies. Our objective was to compare different statistical approaches for pooling count data of varying follow-up times in terms of estimates of effect, precision, and clinical interpretability. Methods We examined data from a published Cochrane Review of asthma self-management education in children. We selected two rate measures with the largest number of contributing studies: school absences and emergency room (ER visits. We estimated fixed- and random-effects standardized weighted mean differences (SMD, stratified incidence rate differences (IRD, and stratified incidence rate ratios (IRR. We also fit Poisson regression models, which allowed for further adjustment for clustering by study. Results For both outcomes, all methods gave qualitatively similar estimates of effect in favor of the intervention. For school absences, SMD showed modest results in favor of the intervention (SMD -0.14, 95% CI -0.23 to -0.04. IRD implied that the intervention reduced school absences by 1.8 days per year (IRD -0.15 days/child-month, 95% CI -0.19 to -0.11, while IRR suggested a 14% reduction in absences (IRR 0.86, 95% CI 0.83 to 0.90. For ER visits, SMD showed a modest benefit in favor of the intervention (SMD -0.27, 95% CI: -0.45 to -0.09. IRD implied that the intervention reduced ER visits by 1 visit every 2 years (IRD -0.04 visits/child-month, 95% CI: -0.05 to -0.03, while IRR suggested a 34% reduction in ER visits (IRR 0.66, 95% CI 0.59 to 0.74. In Poisson models, adjustment for clustering lowered the precision of the estimates relative to stratified IRR results. For ER visits but not school absences, failure to incorporate study indicators resulted in a different estimate of effect (unadjusted IRR 0.77, 95% CI 0.59 to 0.99. Conclusions Choice of method among the ones presented had little effect on inference but affected the

Linear rate-equilibrium relations arising from ion channel-bilayer energetic coupling

DEFF Research Database (Denmark)

Greisen, Per Junior; Lum, Kevin; Ashrafuzzaman, Md

2011-01-01

Linear rate-equilibrium (RE) relations, also known as linear free energy relations, are widely observed in chemical reactions, including protein folding, enzymatic catalysis, and channel gating. Despite the widespread occurrence of linear RE relations, the principles underlying the linear relatio...

Measurement for the Leak Rate enhanced by a Improved Method

International Nuclear Information System (INIS)

Bae, Sang-Hoon; Choi, Young-San; Kim, Young-Ki; Lee, Yong-Sub; Jung, Hoan-Sung

2007-01-01

The leak rate measurement of the HANARO such as a research reactor that adopts a confinement concept for a reactor hall is very important one during a period inspection. This test verifies whether the reactor building could maintain the negative pressure or not when radiation is perceived by abnormal accidents. Of course, this may not cause a problem in a reactor operation only if it can satisfy the design requirement, but it is necessary to have some margin of a limitation value because a reactor hall should be managed more conservatively than the design reference. To meet the requirements of this strict design condition, previous method was changed to a new type of test with more stable and robust measuring method. The new leak rate measurement method is briefly introduced and the merits of this proposed method are shown through the data analyzed for last 3 years

Comparative study on flow rate measurement by nuclear and conventional methods in selected rivers at Ulu Langat district, Selangor

Energy Technology Data Exchange (ETDEWEB)

Wan Mohamad Tahir, Wan Zakaria; Mohamad, Daud; Hamzah, Abdul Razak; Yusuf, Johari Mohamad; Aziz Wan Mohamad, Wan Abdul

1986-06-01

A radiotracer technique using Tc-99 to measure flows of small rivers was introduced in Malaysia. Three rivers in the Ulu Langat District were selected for a comparative study on flow rate determination by conventional and radioisotope methods. Radioisotopic approach, comprising injection procedures, calibration, mixing length and safety aspects are discussed. The results measured by radioisotope method are compared to the Drainage and Irrigation Department's (DID's) discharge curves data collected from 1980 to 1982 which is calibrated using a current meter. The results are comparable and fall within the range obtained by conventional method. Related to this study, a comprehensive work on stream gauging of moderate and high flow rates using both methods is proposed to be carried out directly.

A Comparison of Affect Ratings Obtained with Ecological Momentary Assessment and the Day Reconstruction Method

Science.gov (United States)

Dockray, Samantha; Grant, Nina; Stone, Arthur A.; Kahneman, Daniel; Wardle, Jane

2010-01-01

Measurement of affective states in everyday life is of fundamental importance in many types of quality of life, health, and psychological research. Ecological momentary assessment (EMA) is the recognized method of choice, but the respondent burden can be high. The day reconstruction method (DRM) was developed by Kahneman and colleagues (Science, 2004, 306, 1776–1780) to assess affect, activities and time use in everyday life. We sought to validate DRM affect ratings by comparison with contemporaneous EMA ratings in a sample of 94 working women monitored over work and leisure days. Six EMA ratings of happiness, tiredness, stress, and anger/frustration were obtained over each 24 h period, and were compared with DRM ratings for the same hour, recorded retrospectively at the end of the day. Similar profiles of affect intensity were recorded with the two techniques. The between-person correlations adjusted for attenuation ranged from 0.58 (stress, working day) to 0.90 (happiness, leisure day). The strength of associations was not related to age, educational attainment, or depressed mood. We conclude that the DRM provides reasonably reliable estimates both of the intensity of affect and variations in affect over the day, so is a valuable instrument for the measurement of everyday experience in health and social research. PMID:21113328

Multi-GNSS high-rate RTK, PPP and novel direct phase observation processing method: application to precise dynamic displacement detection

Science.gov (United States)

Paziewski, Jacek; Sieradzki, Rafal; Baryla, Radoslaw

2018-03-01

This paper provides the methodology and performance assessment of multi-GNSS signal processing for the detection of small-scale high-rate dynamic displacements. For this purpose, we used methods of relative (RTK) and absolute positioning (PPP), and a novel direct signal processing approach. The first two methods are recognized as providing accurate information on position in many navigation and surveying applications. The latter is an innovative method for dynamic displacement determination with the use of GNSS phase signal processing. This method is based on the developed functional model with parametrized epoch-wise topocentric relative coordinates derived from filtered GNSS observations. Current regular kinematic PPP positioning, as well as medium/long range RTK, may not offer coordinate estimates with subcentimeter precision. Thus, extended processing strategies of absolute and relative GNSS positioning have been developed and applied for displacement detection. The study also aimed to comparatively analyze the developed methods as well as to analyze the impact of combined GPS and BDS processing and the dependence of the results of the relative methods on the baseline length. All the methods were implemented with in-house developed software allowing for high-rate precise GNSS positioning and signal processing. The phase and pseudorange observations collected with a rate of 50 Hz during the field test served as the experiment’s data set. The displacements at the rover station were triggered in the horizontal plane using a device which was designed and constructed to ensure a periodic motion of GNSS antenna with an amplitude of ~3 cm and a frequency of ~4.5 Hz. Finally, a medium range RTK, PPP, and direct phase observation processing method demonstrated the capability of providing reliable and consistent results with the precision of the determined dynamic displacements at the millimeter level. Specifically, the research shows that the standard deviation of

An Efficient Quality-Related Fault Diagnosis Method for Real-Time Multimode Industrial Process

Directory of Open Access Journals (Sweden)

Kaixiang Peng

2017-01-01

Full Text Available Focusing on quality-related complex industrial process performance monitoring, a novel multimode process monitoring method is proposed in this paper. Firstly, principal component space clustering is implemented under the guidance of quality variables. Through extraction of model tags, clustering information of original training data can be acquired. Secondly, according to multimode characteristics of process data, the monitoring model integrated Gaussian mixture model with total projection to latent structures is effective after building the covariance description form. The multimode total projection to latent structures (MTPLS model is the foundation of problem solving about quality-related monitoring for multimode processes. Then, a comprehensive statistics index is defined which is based on the posterior probability of the monitored samples belonging to each Gaussian component in the Bayesian theory. After that, a combined index is constructed for process monitoring. Finally, motivated by the application of traditional contribution plot in fault diagnosis, a gradient contribution rate is applied for analyzing the variation of variable contribution rate along samples. Our method can ensure the implementation of online fault monitoring and diagnosis for multimode processes. Performances of the whole proposed scheme are verified in a real industrial, hot strip mill process (HSMP compared with some existing methods.

Using field feedback to estimate failure rates of safety-related systems

International Nuclear Information System (INIS)

Brissaud, Florent

2017-01-01

The IEC 61508 and IEC 61511 functional safety standards encourage the use of field feedback to estimate the failure rates of safety-related systems, which is preferred than generic data. In some cases (if “Route 2_H” is adopted for the 'hardware safety integrity constraints”), this is even a requirement. This paper presents how to estimate the failure rates from field feedback with confidence intervals, depending if the failures are detected on-line (called 'detected failures', e.g. by automatic diagnostic tests) or only revealed by proof tests (called 'undetected failures'). Examples show that for the same duration and number of failures observed, the estimated failure rates are basically higher for “undetected failures” because, in this case, the duration observed includes intervals of time where it is unknown that the elements have failed. This points out the need of using a proper approach for failure rates estimation, especially for failures that are not detected on-line. Then, this paper proposes an approach to use the estimated failure rates, with their uncertainties, for PFDavg and PFH assessment with upper confidence bounds, in accordance with IEC 61508 and IEC 61511 requirements. Examples finally show that the highest SIL that can be claimed for a safety function can be limited by the 90% upper confidence bound of PFDavg or PFH. The requirements of the IEC 61508 and IEC 61511 relating to the data collection and analysis should therefore be properly considered for the study of all safety-related systems. - Highlights: • This paper deals with requirements of the IEC 61508 and IEC 61511 for using field feedback to estimate failure rates of safety-related systems. • This paper presents how to estimate the failure rates from field feedback with confidence intervals for failures that are detected on-line. • This paper presents how to estimate the failure rates from field feedback with confidence intervals for failures that are only revealed by

Review of assessment methods discount rate in investment analysis

Directory of Open Access Journals (Sweden)

Yamaletdinova Guzel Hamidullovna

2011-08-01

Full Text Available The article examines the current methods of calculating discount rate in investment analysis and business valuation, as well as analyzes the key problems using various techniques in terms of the Russian economy.

Biasing transition rate method based on direct MC simulation for probabilistic safety assessment

Institute of Scientific and Technical Information of China (English)

Xiao-Lei Pan; Jia-Qun Wang; Run Yuan; Fang Wang; Han-Qing Lin; Li-Qin Hu; Jin Wang

2017-01-01

Direct Monte Carlo (MC) simulation is a powerful probabilistic safety assessment method for accounting dynamics of the system.But it is not efficient at simulating rare events.A biasing transition rate method based on direct MC simulation is proposed to solve the problem in this paper.This method biases transition rates of the components by adding virtual components to them in series to increase the occurrence probability of the rare event,hence the decrease in the variance of MC estimator.Several cases are used to benchmark this method.The results show that the method is effective at modeling system failure and is more efficient at collecting evidence of rare events than the direct MC simulation.The performance is greatly improved by the biasing transition rate method.

Effect of Irrigation Methods, Nitrogen and Phosphorus Fertilizer Rates on Sugar Beet Yield and Quality

International Nuclear Information System (INIS)

Janat, M.; Abudlkareem, J.

2007-01-01

The experiment was conducted at a research station near Adlib. Two irrigation methods, sprinkler irrigation and drip fertigation, two phosphorus rates and four nitrogen rates 0, 70, 140 and 210 kg N/ha were tested. All N fertilizers were injected for drip irrigation or broadcasted for the sprinkler-irrigated treatments in six equally split applications. Neutron probe Results revealed that the introduction of drip fertigation was not proved to be a water saving relative to sprinkler irrigation. Dry matter production was slightly increased for the drip-fertigated treatments relative to sprinkler irrigated treatments. Nitrogen use efficiency was not improved under drip fertigation relative to that of sprinkler irrigation. Application of phosphorus fertilizer improved sugar beet yield as well as N uptake. No significant differences in sugar beet yield were observed due to the application of N fertilizer under drip fertigation. On the other hand, there was a trend toward increasing sugar beet yield grown under sprinkler irrigation. Drip fertigation had no negative effects on sugar content and other related properties, furthermore some of those properties were enhanced due to the employment of drip fertigation. Field water-use efficiency followed a similar trend and was increased under sprinkler irrigation relative to drip-fertigation for sugar beet yield parameter.

Measurement of gastric emptying rate in humans. Simplified scanning method

Energy Technology Data Exchange (ETDEWEB)

Holt, S.; Colliver, J.; Guram, M.; Neal, C.; Verhulst, S.J.; Taylor, T.V. (Univ. of South Carolina School of Medicine, Columbia (USA))

1990-11-01

Simultaneous measurements of the gastric emptying rate of the solid and liquid phase of a dual-isotope-labeled test meal were made using a gamma camera and a simple scintillation detector, similar to that used in a hand-held probe. A simple scanning apparatus, similar to that used in a hand-held scintillation probe, was compared with simultaneous measurements made by a gamma camera in 16 healthy males. A dual-labeled test meal was utilized to measure liquid and solid emptying simultaneously. Anterior and posterior scans were taken at intervals up to 120 min using both a gamma camera and the scintillation probe. Good relative agreement between the methods was obtained both for solid-phase (correlation range 0.92-0.99, mean 0.97) and for liquid-phase data (correlation range 0.93-0.99, mean 0.97). For solid emptying data regression line slopes varied from 0.75 to 1.03 (mean 0.84). Liquid emptying data indicated that slopes ranged from 0.71 to 1.06 (mean 0.87). These results suggested that an estimate of the gamma measurement could be obtained by multiplying the scintillation measurement by a factor of 0.84 for the solid phase and 0.87 for the liquid phase. Correlation between repeat studies was 0.97 and 0.96 for solids and liquids, respectively. The application of a hand-held probe technique provides a noninvasive and inexpensive method for accurately assessing solid- and liquid-phase gastric emptying from the human stomach that correlates well with the use of a gamma camera, within the range of gastric emptying rate in the normal individuals in this study.

Measurement of gastric emptying rate in humans. Simplified scanning method

International Nuclear Information System (INIS)

Holt, S.; Colliver, J.; Guram, M.; Neal, C.; Verhulst, S.J.; Taylor, T.V.

1990-01-01

Simultaneous measurements of the gastric emptying rate of the solid and liquid phase of a dual-isotope-labeled test meal were made using a gamma camera and a simple scintillation detector, similar to that used in a hand-held probe. A simple scanning apparatus, similar to that used in a hand-held scintillation probe, was compared with simultaneous measurements made by a gamma camera in 16 healthy males. A dual-labeled test meal was utilized to measure liquid and solid emptying simultaneously. Anterior and posterior scans were taken at intervals up to 120 min using both a gamma camera and the scintillation probe. Good relative agreement between the methods was obtained both for solid-phase (correlation range 0.92-0.99, mean 0.97) and for liquid-phase data (correlation range 0.93-0.99, mean 0.97). For solid emptying data regression line slopes varied from 0.75 to 1.03 (mean 0.84). Liquid emptying data indicated that slopes ranged from 0.71 to 1.06 (mean 0.87). These results suggested that an estimate of the gamma measurement could be obtained by multiplying the scintillation measurement by a factor of 0.84 for the solid phase and 0.87 for the liquid phase. Correlation between repeat studies was 0.97 and 0.96 for solids and liquids, respectively. The application of a hand-held probe technique provides a noninvasive and inexpensive method for accurately assessing solid- and liquid-phase gastric emptying from the human stomach that correlates well with the use of a gamma camera, within the range of gastric emptying rate in the normal individuals in this study

A prediction method for the wax deposition rate based on a radial basis function neural network

Directory of Open Access Journals (Sweden)

Ying Xie

2017-06-01

Full Text Available The radial basis function neural network is a popular supervised learning tool based on machinery learning technology. Its high precision having been proven, the radial basis function neural network has been applied in many areas. The accumulation of deposited materials in the pipeline may lead to the need for increased pumping power, a decreased flow rate or even to the total blockage of the line, with losses of production and capital investment, so research on predicting the wax deposition rate is significant for the safe and economical operation of an oil pipeline. This paper adopts the radial basis function neural network to predict the wax deposition rate by considering four main influencing factors, the pipe wall temperature gradient, pipe wall wax crystal solubility coefficient, pipe wall shear stress and crude oil viscosity, by the gray correlational analysis method. MATLAB software is employed to establish the RBF neural network. Compared with the previous literature, favorable consistency exists between the predicted outcomes and the experimental results, with a relative error of 1.5%. It can be concluded that the prediction method of wax deposition rate based on the RBF neural network is feasible.

Cesarean Section Rate in Singleton Primiparae and Related Factors in Beijing, China.

Science.gov (United States)

Song, Geng; Wei, Yu-Mei; Zhu, Wei-Wei; Yang, Hui-Xia

2017-10-20

The cesarean section rate (CSR) has been a main concern worldwide. The present study aimed to investigate the CSR in Beijing, China, and to analyze the related factors of CS delivery. An observational study was conducted in 15 medical centers in Beijing using a systemic cluster sampling method. In total, 15,194 pregnancies were enrolled in the study between June 20, 2013 and November 30, 2013. Independent t-tests and Pearson's Chi-square test were used to examine differences between two groups, and related factors of the CSR were examined by multivariable logistic regression. The CSR was 41.9% (4471/10,671) in singleton primiparae. Women who were more than 35 years old had a 7.4-fold increased risk of CS delivery compared with women level. Neonates weighing 3000-3499 g had the lowest CSR (36.2%). Neonates weighing levels, residence, education level, and singleton fetal birth weight are all factors that might significantly affect the CSR.

Paraquat prohibition and change in the suicide rate and methods in South Korea.

Directory of Open Access Journals (Sweden)

Woojae Myung

Full Text Available The annual suicide rate in South Korea is the highest among the developed countries. Paraquat is a highly lethal herbicide, commonly used in South Korea as a means for suicide. We have studied the effect of the 2011 paraquat prohibition on the national suicide rate and method of suicide in South Korea. We obtained the monthly suicide rate from 2005 to 2013 in South Korea. In our analyses, we adjusted for the effects of celebrity suicides, and economic, meteorological, and seasonal factors on suicide rate. We employed change point analysis to determine the effect of paraquat prohibition on suicide rate over time, and the results were verified by structural change analysis, an alternative statistical method. After the paraquat prohibition period in South Korea, there was a significant reduction in the total suicide rate and suicide rate by poisoning with herbicides or fungicides in all age groups and in both genders. The estimated suicide rates during this period decreased by 10.0% and 46.1% for total suicides and suicides by poisoning of herbicides or fungicides, respectively. In addition, method substitution effect of paraquat prohibition was found in suicide by poisoning by carbon monoxide, which did not exceed the reduction in the suicide rate of poisoning with herbicides or fungicides. In South Korea, paraquat prohibition led to a lower rate of suicide by paraquat poisoning, as well as a reduction in the overall suicide rate. Paraquat prohibition should be considered as a national suicide prevention strategy in developing and developed countries alongside careful observation for method substitution effects.

Paraquat prohibition and change in the suicide rate and methods in South Korea.

Science.gov (United States)

Myung, Woojae; Lee, Geung-Hee; Won, Hong-Hee; Fava, Maurizio; Mischoulon, David; Nyer, Maren; Kim, Doh Kwan; Heo, Jung-Yoon; Jeon, Hong Jin

2015-01-01

The annual suicide rate in South Korea is the highest among the developed countries. Paraquat is a highly lethal herbicide, commonly used in South Korea as a means for suicide. We have studied the effect of the 2011 paraquat prohibition on the national suicide rate and method of suicide in South Korea. We obtained the monthly suicide rate from 2005 to 2013 in South Korea. In our analyses, we adjusted for the effects of celebrity suicides, and economic, meteorological, and seasonal factors on suicide rate. We employed change point analysis to determine the effect of paraquat prohibition on suicide rate over time, and the results were verified by structural change analysis, an alternative statistical method. After the paraquat prohibition period in South Korea, there was a significant reduction in the total suicide rate and suicide rate by poisoning with herbicides or fungicides in all age groups and in both genders. The estimated suicide rates during this period decreased by 10.0% and 46.1% for total suicides and suicides by poisoning of herbicides or fungicides, respectively. In addition, method substitution effect of paraquat prohibition was found in suicide by poisoning by carbon monoxide, which did not exceed the reduction in the suicide rate of poisoning with herbicides or fungicides. In South Korea, paraquat prohibition led to a lower rate of suicide by paraquat poisoning, as well as a reduction in the overall suicide rate. Paraquat prohibition should be considered as a national suicide prevention strategy in developing and developed countries alongside careful observation for method substitution effects.

Semi-Automatic Rating Method for Neutrophil Alkaline Phosphatase Activity.

Science.gov (United States)

Sugano, Kanae; Hashi, Kotomi; Goto, Misaki; Nishi, Kiyotaka; Maeda, Rie; Kono, Keigo; Yamamoto, Mai; Okada, Kazunori; Kaga, Sanae; Miwa, Keiko; Mikami, Taisei; Masauzi, Nobuo

2017-01-01

The neutrophil alkaline phosphatase (NAP) score is a valuable test for the diagnosis of myeloproliferative neoplasms, but it has still manually rated. Therefore, we developed a semi-automatic rating method using Photoshop ® and Image-J, called NAP-PS-IJ. Neutrophil alkaline phosphatase staining was conducted with Tomonaga's method to films of peripheral blood taken from three healthy volunteers. At least 30 neutrophils with NAP scores from 0 to 5+ were observed and taken their images. From which the outer part of neutrophil was removed away with Image-J. These were binarized with two different procedures (P1 and P2) using Photoshop ® . NAP-positive area (NAP-PA) and granule (NAP-PGC) were measured and counted with Image-J. The NAP-PA in images binarized with P1 significantly (P < 0.05) differed between images with NAP scores from 0 to 3+ (group 1) and those from 4+ to 5+ (group 2). The original images in group 1 were binarized with P2. NAP-PGC of them significantly (P < 0.05) differed among all four NAP score groups. The mean NAP-PGC with NAP-PS-IJ indicated a good correlation (r = 0.92, P < 0.001) to results by human examiners. The sensitivity and specificity of NAP-PS-IJ were 60% and 92%, which might be considered as a prototypic method for the full-automatic rating NAP score. © 2016 Wiley Periodicals, Inc.

Advanced evaluation method of SG TSP BEC hole blockage rate

International Nuclear Information System (INIS)

Izumida, Hiroyuki; Nagata, Yasuyuki; Harada, Yutaka; Murakami, Ryuji

2003-01-01

In spite of the control of the water chemistry of SG secondary feed-water in PWR-SG, SG TSP BEC holes, which are the flow path of secondary water, are often clogged. In the past, the trending of BEC hole blockage rate has conducted by evaluating ECT original signals and visual inspections. However, the ECT original signals of deposits are diversified, it becomes difficult to analyze them with the existing evaluation method using the ECT original signals. In this regard, we have developed the secondary side visual inspection system, which enables the high-accuracy evaluation of BEC hole blockage rate, and new ECT signal evaluation method. (author)

Medication-related problem type and appearance rate in ambulatory hemodialysis patients

Directory of Open Access Journals (Sweden)

Drayer Debra K

2003-12-01

Full Text Available Abstract Background Hemodialysis (HD patients are at risk for medication-related problems (MRP. The MRP number, type, and appearance rate over time in ambulatory HD patients has not been investigated. Methods Randomly selected HD patients were enrolled to receive monthly pharmaceutical care visits. At each visit, MRP were identified through review of the patient chart, electronic medical record, patient interview, and communications with other healthcare disciplines. All MRP were categorized by type and medication class. MRP appearance rate was determined as the number of MRP identified per month/number of months in study. The number of MRP per patient-drug exposures were determined using: {[(number of patients × (mean number of medications]/(number of months of study} /number of MRP identified. Results were expressed as mean ± standard deviation or percentages. Results Patients were 62.6 ± 15.9 years old, had 6.4 ± 2.0 comorbid conditions, were taking 12.5 ± 4.2 medications, and 15.7 ± 7.2 doses per day at baseline. Medication-dosing problems (33.5%, adverse drug reactions (20.7%, and an indication that was not currently being treated (13.5% were the most common MRP. 5,373 medication orders were reviewed and a MRP was identified every 15.2 medication exposures. Overall MRP appearance rate was 0.68 ± 0.46 per patient per month. Conclusion MRP continue to occur at a high rate in ambulatory HD patients. Healthcare providers taking care of HD patients should be aware of this problem and efforts to avoid or resolve MRP should be undertaken at all HD clinics.

Age-related differences in the rate and diagnosis of 30-day readmission after hospitalization for acute ischemic stroke.

Science.gov (United States)

Hirayama, Atsushi; Goto, Tadahiro; Faridi, Mohammad K; Camargo, Carlos A; Hasegawa, Kohei

2018-01-01

Background Little is known about the association between age and readmission within 30 days after hospitalization for acute ischemic stroke. Aim To examine the age-related differences in rate and principal reason of 30-day readmissions in patients hospitalized for acute ischemic stroke. Methods In this retrospective, population-based cohort study using State Inpatient Databases from eight US states, we identified all adults hospitalized for acute ischemic stroke. We grouped the patients into four age categories: readmission within 30 days of discharge from the index hospitalization for acute ischemic stroke and the principal diagnosis of 30-day readmission. Results We identified 620,788 hospitalizations for acute ischemic stroke. The overall 30-day readmission rate was 16.6% with an increase with advanced age. Compared to patients aged readmission rate was significantly higher in age 65-74 years (OR 1.19; 95% CI 1.16-1.21), in age 75-84 years (OR 1.29; 95% CI 1.27-1.31), and in ≥ 85 years (OR 1.24; 95% CI 1.22-1.27; all Preadmission rate association between men and women (P interaction  readmissions were assigned stroke-related conditions or rehabilitation care. Compared to younger adults, older adults were more likely to present with non-stroke-related conditions (46.1% in readmission rate after acute ischemic stroke. Compared with younger adults, older adults were more likely to be readmitted for non-stroke-related conditions.

Unsteady-state human-body exergy consumption rate and its relation to subjective assessment of dynamic thermal environments

DEFF Research Database (Denmark)

Schweiker, Marcel; Kolarik, Jakub; Dovjak, Mateja

2016-01-01

of the present study confirmed previously indicated trends that lowest human body exergy consumption rate is associated with thermal sensation close to neutrality. Moreover, higher acceptability was in general associated with lower human body exergy consumption rate. (C) 2016 Elsevier B.V. All rights reserved.......Few examples studied applicability of exergy analysis on human thermal comfort. These examples relate the human-body exergy consumption rate with subjectively obtained thermal sensation votes and had been based on steady-state calculation methods. However, humans are rarely exposed to steady...... between the human-body exergy consumption rate and subjective assessment of thermal environment represented by thermal sensation as well as to extend the investigation towards thermal acceptability votes. Comparison of steady-state and unsteady-state model showed that results from both models were...

Estimating evolutionary rates using time-structured data: a general comparison of phylogenetic methods.

Science.gov (United States)

Duchêne, Sebastián; Geoghegan, Jemma L; Holmes, Edward C; Ho, Simon Y W

2016-11-15

In rapidly evolving pathogens, including viruses and some bacteria, genetic change can accumulate over short time-frames. Accordingly, their sampling times can be used to calibrate molecular clocks, allowing estimation of evolutionary rates. Methods for estimating rates from time-structured data vary in how they treat phylogenetic uncertainty and rate variation among lineages. We compiled 81 virus data sets and estimated nucleotide substitution rates using root-to-tip regression, least-squares dating and Bayesian inference. Although estimates from these three methods were often congruent, this largely relied on the choice of clock model. In particular, relaxed-clock models tended to produce higher rate estimates than methods that assume constant rates. Discrepancies in rate estimates were also associated with high among-lineage rate variation, and phylogenetic and temporal clustering. These results provide insights into the factors that affect the reliability of rate estimates from time-structured sequence data, emphasizing the importance of clock-model testing. sduchene@unimelb.edu.au or garzonsebastian@hotmail.comSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

CTL lysis: there is a hyperbolic relation of killing rate to exocytosable granzyme A for highly cytotoxic murine cytotoxic T lymphocytes.

Science.gov (United States)

Poe, M; Wu, J K; Talento, A; Koo, G C

1996-06-10

The lysis of susceptible targets by efficient cytotoxic T lymphocytes (CTL) increases both with time and with the ratio of CTL to target. Simple methods for calculating a killing rate constant from the time dependence of killing and for calculating the relation of the killing rate constant to the concentration of exocytosable granzyme A are given. Application of these methods to the killing of target cells by the highly efficient mouse CTL AR1 is presented. AR1 needed granzyme A for efficient killing. AR1 contained sufficient exocytosable granzyme A to kill at about 80% of the rate possible at infinite exocytosable granzyme A.

Method and apparatus for simultaneous determination of fluid mass flow rate, mean velocity and density

International Nuclear Information System (INIS)

Hamel, W.R.

1984-01-01

This invention relates to a new method and new apparatus for determining fluid mass flow rate and density. In one aspect of the invention, the fluid is passed through a straight cantilevered tube in which transient oscillation has been induced, thus generating Coriolis damping forces on the tube. The decay rate and frequency of the resulting damped oscillation are measured, and the fluid mass flow rate and density are determined therefrom. In another aspect of the invention, the fluid is passed through the cantilevered tube while an electrically powered device imparts steady-state harmonic excitation to the tube. This generates Coriolis tube-damping forces which are dependent on the mass flow rate of the fluid. Means are provided to respond to incipient flow-induced changes in the amplitude of vibration by changing the power input to the excitation device as required to sustain the original amplitude of vibration. The fluid mass flow rate and density are determined from the required change in power input. The invention provides stable, rapid, and accurate measurements. It does not require bending of the fluid flow

14C/C measurements support Andreev's internode method to determine lichen growth rates in Cladina stygia (Fr.) Ahti

Energy Technology Data Exchange (ETDEWEB)

Holt, E; Bench, G

2007-12-05

Growth rates and the ability to date an organism can greatly contribute to understanding its population biology and community dynamics. 1n 1954, Andreev proposed a method to date Cladina, a fruticose lichen, using total thallus length and number of internodes. No research, however, has demonstrated the reliability of this technique or compared its estimates to those derived by other means. In this study, we demonstrate the utility of {sup 14}C/C ratios to determine lichen age and growth rate in Cladina stygia (Fr.) Ahti collected from northwestern Alaska, USA. The average growth rate using {sup 14}C/C ratios was 6.5 mm {center_dot} yr{sup -1}, which was not significantly different from growth rates derived by Andreev's internode method (average = 6.2 mm {center_dot} yr{sup -1}); thus, suggesting the reliability of Andreev's simple field method for dating lichens. In addition, we found lichen growth rates appeared to differ with geographic location, yet did not seem related to ambient temperature and total precipitation.

Dependence of the firearm-related homicide rate on gun availability: a mathematical analysis.

Directory of Open Access Journals (Sweden)

Dominik Wodarz

Full Text Available In the USA, the relationship between the legal availability of guns and the firearm-related homicide rate has been debated. It has been argued that unrestricted gun availability promotes the occurrence of firearm-induced homicides. It has also been pointed out that gun possession can protect potential victims when attacked. This paper provides a first mathematical analysis of this tradeoff, with the goal to steer the debate towards arguing about assumptions, statistics, and scientific methods. The model is based on a set of clearly defined assumptions, which are supported by available statistical data, and is formulated axiomatically such that results do not depend on arbitrary mathematical expressions. According to this framework, two alternative scenarios can minimize the gun-related homicide rate: a ban of private firearms possession, or a policy allowing the general population to carry guns. Importantly, the model identifies the crucial parameters that determine which policy minimizes the death rate, and thus serves as a guide for the design of future epidemiological studies. The parameters that need to be measured include the fraction of offenders that illegally possess a gun, the degree of protection provided by gun ownership, and the fraction of the population who take up their right to own a gun and carry it when attacked. Limited data available in the literature were used to demonstrate how the model can be parameterized, and this preliminary analysis suggests that a ban of private firearm possession, or possibly a partial reduction in gun availability, might lower the rate of firearm-induced homicides. This, however, should not be seen as a policy recommendation, due to the limited data available to inform and parameterize the model. However, the model clearly defines what needs to be measured, and provides a basis for a scientific discussion about assumptions and data.

Dependence of the firearm-related homicide rate on gun availability: a mathematical analysis.

Science.gov (United States)

Wodarz, Dominik; Komarova, Natalia L

2013-01-01

In the USA, the relationship between the legal availability of guns and the firearm-related homicide rate has been debated. It has been argued that unrestricted gun availability promotes the occurrence of firearm-induced homicides. It has also been pointed out that gun possession can protect potential victims when attacked. This paper provides a first mathematical analysis of this tradeoff, with the goal to steer the debate towards arguing about assumptions, statistics, and scientific methods. The model is based on a set of clearly defined assumptions, which are supported by available statistical data, and is formulated axiomatically such that results do not depend on arbitrary mathematical expressions. According to this framework, two alternative scenarios can minimize the gun-related homicide rate: a ban of private firearms possession, or a policy allowing the general population to carry guns. Importantly, the model identifies the crucial parameters that determine which policy minimizes the death rate, and thus serves as a guide for the design of future epidemiological studies. The parameters that need to be measured include the fraction of offenders that illegally possess a gun, the degree of protection provided by gun ownership, and the fraction of the population who take up their right to own a gun and carry it when attacked. Limited data available in the literature were used to demonstrate how the model can be parameterized, and this preliminary analysis suggests that a ban of private firearm possession, or possibly a partial reduction in gun availability, might lower the rate of firearm-induced homicides. This, however, should not be seen as a policy recommendation, due to the limited data available to inform and parameterize the model. However, the model clearly defines what needs to be measured, and provides a basis for a scientific discussion about assumptions and data.

Method for measuring the decay rate of a radionuclide emitting β-rays in a liquid sample

International Nuclear Information System (INIS)

Horrocks, D.

1977-01-01

With this method the decay rate of a radionuclide emitting β-rays, e.g. 3 H or 14 C, in a liquid sample can be measured by means of liquid scintillation counters, at least two different versions of the sample being used with quench effect (shifting of the Compton spectrum). For this purpose each sample is counted with and without a radioactive standard source, e.g. 137 Cs. Then a pulse height will be determined corresponding to a selected point in the pulse height spectrum if the standard source is present. The determination of a zero-threshold sample count rate is then performed by counting the sample in a counting window. In addition standardized values of the measured pulse heights are derived and put in mathematical relation to corresponding pulse count rates, the pulse count rate for a standardized pulse height value thus becoming zero and the sample decay rate in this way being determined. (DG) 891 HP [de

Flow Rate Measurement Using 99mTc Radiotracer Method in a Pipe Installation

International Nuclear Information System (INIS)

Sipaun, S. M.; Bakar, A. Q. Abu; Othman, N.; Shaari, M. R.; Adnan, M. A. K.; Yusof, J. Mohd; Demanah, R.

2010-01-01

Flow rate is a significant parameter for managing processes in chemical processing plants and water processing facility. Accurate measurement of the flow rate allows engineers to monitor the delivery of process material, which in turn impacts a plant's capacity to produce their products. One of the available methods for determining the flow rate of a process material is by introducing a radiotracer to the system that mimics the material's flow pattern. In this study, a low activity Technetium-99m radioisotope was injected into a water piping setup and the 2'' x 2'' NaI (Tl) detectors were calibrated to detect spectrum peaks at specific points of the pipe installation. Using pulse velocity method, water flow rate was determined to be 11.3 litres per minute. For the sampling method, at different pump capacity, the flow rate was 15.0 litres per minute.

Meta-analytic methods for pooling rates when follow-up duration varies: a case study.

Science.gov (United States)

Guevara, James P; Berlin, Jesse A; Wolf, Fredric M

2004-07-12

Meta-analysis can be used to pool rate measures across studies, but challenges arise when follow-up duration varies. Our objective was to compare different statistical approaches for pooling count data of varying follow-up times in terms of estimates of effect, precision, and clinical interpretability. We examined data from a published Cochrane Review of asthma self-management education in children. We selected two rate measures with the largest number of contributing studies: school absences and emergency room (ER) visits. We estimated fixed- and random-effects standardized weighted mean differences (SMD), stratified incidence rate differences (IRD), and stratified incidence rate ratios (IRR). We also fit Poisson regression models, which allowed for further adjustment for clustering by study. For both outcomes, all methods gave qualitatively similar estimates of effect in favor of the intervention. For school absences, SMD showed modest results in favor of the intervention (SMD -0.14, 95% CI -0.23 to -0.04). IRD implied that the intervention reduced school absences by 1.8 days per year (IRD -0.15 days/child-month, 95% CI -0.19 to -0.11), while IRR suggested a 14% reduction in absences (IRR 0.86, 95% CI 0.83 to 0.90). For ER visits, SMD showed a modest benefit in favor of the intervention (SMD -0.27, 95% CI: -0.45 to -0.09). IRD implied that the intervention reduced ER visits by 1 visit every 2 years (IRD -0.04 visits/child-month, 95% CI: -0.05 to -0.03), while IRR suggested a 34% reduction in ER visits (IRR 0.66, 95% CI 0.59 to 0.74). In Poisson models, adjustment for clustering lowered the precision of the estimates relative to stratified IRR results. For ER visits but not school absences, failure to incorporate study indicators resulted in a different estimate of effect (unadjusted IRR 0.77, 95% CI 0.59 to 0.99). Choice of method among the ones presented had little effect on inference but affected the clinical interpretability of the findings. Incidence rate

Method of Euthanasia Influences the Oocyte Fertilization Rate with Fresh Mouse Sperm

Science.gov (United States)

Hazzard, Karen C; Watkins-Chow, Dawn E; Garrett, Lisa J

2014-01-01

In vitro fertilization (IVF) is used to produce mouse embryos for a variety of reasons. We evaluated the effect of the method of euthanasia on the fertilization rate in 2 different IVF protocols. Oocytes collected from C57BL/6J female mice euthanized by CO2 inhalation or cervical dislocation were used in IVF with fresh sperm from either wild-type or genetically engineered C57BL/6J. Compared with CO2 inhalation, cervical dislocation improved the resulting rate of fertilization by 18% in an IVF method using Cook media and by 13% in an IVF method using methyl-B cyclodextrin and reduced glutathione. The lower fertilization rate due to euthanasia by CO2 inhalation was accompanied by changes in blood pH and body temperature despite efforts to minimize temperature drops. In our hands, euthanasia by cervical dislocation improved fertilization rates and consequently reduced the number of egg-donor mice required. PMID:25650969

Method of euthanasia influences the oocyte fertilization rate with fresh mouse sperm.

Science.gov (United States)

Hazzard, Karen C; Watkins-Chow, Dawn E; Garrett, Lisa J

2014-11-01

In vitro fertilization (IVF) is used to produce mouse embryos for a variety of reasons. We evaluated the effect of the method of euthanasia on the fertilization rate in 2 different IVF protocols. Oocytes collected from C57BL/6J female mice euthanized by CO2 inhalation or cervical dislocation were used in IVF with fresh sperm from either wild-type or genetically engineered C57BL/6J. Compared with CO2 inhalation, cervical dislocation improved the resulting rate of fertilization by 18% in an IVF method using Cook media and by 13% in an IVF method using methyl-B cyclodextrin and reduced glutathione. The lower fertilization rate due to euthanasia by CO2 inhalation was accompanied by changes in blood pH and body temperature despite efforts to minimize temperature drops. In our hands, euthanasia by cervical dislocation improved fertilization rates and consequently reduced the number of egg-donor mice required.

Dose Rate Experiment at JET for Benchmarking the Calculation Direct One Step Method

International Nuclear Information System (INIS)

Angelone, M.; Petrizzi, L.; Pillon, M.; Villari, R.; Popovichev, S.

2006-01-01

Neutrons produced by D-D and D-T plasmas induce the activation of tokamak materials and of components. The development of reliable methods to assess dose rates is a key issue for maintenance and operating nuclear machines, in normal and off-normal conditions. In the frame of the EFDA Fusion Technology work programme, a computational tool based upon MCNP Monte Carlo code has been developed to predict the dose rate after shutdown: it is called Direct One Step Method (D1S). The D1S is an innovative approach in which the decay gammas are coupled to the neutrons as in the prompt case and they are transported in one single step in the same run. Benchmarking of this new tool with experimental data taken in a complex geometry like that of a tokamak is a fundamental step to test the reliability of the D1S method. A dedicated benchmark experiment was proposed for the 2005-2006 experimental campaign of JET. Two irradiation positions have been selected for the benchmark: one inner position inside the vessel, not far from the plasma, called the 2 upper irradiation end (IE2), where neutron fluence is relatively high. The second position is just outside a vertical port in an external position (EX). Here the neutron flux is lower and the dose rate to be measured is not very far from the residual background. Passive detectors are used for in-vessel measurements: the high sensitivity Thermo Luminescent Dosimeters (TLDs) GR-200A (natural LiF), which ensure measurements down to environmental dose level. An active detector of Geiger-Muller (GM) type is used for out of vessel dose rate measurement. Before their use the detectors were calibrated in a secondary gamma-ray standard (Cs-137 and Co-60) facility in term of air-kerma. The background measurement was carried-out in the period July -September 2005 in the outside position EX using the GM tube and in September 2005 inside the vacuum vessel using TLD detectors located in the 2 Upper irradiation end IE2. In the present work

Systematic method for resource rating with two applications to potential wilderness areas

International Nuclear Information System (INIS)

Voelker, A.H.; Wedow, H.; Oakes, E.; Scheffler, P.K.

1979-09-01

A versatile method was developed to rate the energy- and mineral-resource potentials of areas in which land-management and resource-development decisions must be reached with a minimum expenditure of money and time. The method surveys published and personal information on resources in the region being assessed, selects the most appropriate information, synthesizes the information into map overlays and tract descriptions, rates the potential of tracts for particular resources, rates the overall importance of each tract for resource development, and documents the ratings and their significance. Basic criteria considered by the assessment team include the favorability and certainty ratings, the overall availability of each rated resource within this country, the size of a given tract, economic factors, and the number of resources in a tract. The method was applied to two separate but roughly similar geologic regions, the Idaho-Wyoming-Utah thrust belt and the central Appalachians. Undeveloped tracts of national forestland in these regions that are being considered for possible designation under the Roadless Area Review and Evaluation (RARE II) planning process were rated for their resource value. Results support earlier indications that the 63 tracts comprising the western thrust belt possess a high potential for future resource development. Nearly one-half of these tracts were rated either 3 or 4. However, the wide spread of the importance ratings between 1 and 4 suggests that some tracts or portions of tracts can be added to the National Wilderness System without compromising resource development. The 72 eastern thrust belt tracts were given lower ratings, which indicates the reduced significance of the few remaining roadless areas in this region in satisfying the nation's near-term resource needs

RCS Leak Rate Calculation with High Order Least Squares Method

International Nuclear Information System (INIS)

Lee, Jeong Hun; Kang, Young Kyu; Kim, Yang Ki

2010-01-01

As a part of action items for Application of Leak before Break(LBB), RCS Leak Rate Calculation Program is upgraded in Kori unit 3 and 4. For real time monitoring of operators, periodic calculation is needed and corresponding noise reduction scheme is used. This kind of study was issued in Korea, so there have upgraded and used real time RCS Leak Rate Calculation Program in UCN unit 3 and 4 and YGN unit 1 and 2. For reduction of the noise in signals, Linear Regression Method was used in those programs. Linear Regression Method is powerful method for noise reduction. But the system is not static with some alternative flow paths and this makes mixed trend patterns of input signal values. In this condition, the trend of signal and average of Linear Regression are not entirely same pattern. In this study, high order Least squares Method is used to follow the trend of signal and the order of calculation is rearranged. The result of calculation makes reasonable trend and the procedure is physically consistence

Reviewing and piloting methods for decreasing discount rates; someone, somewhere in time.

Science.gov (United States)

Parouty, Mehraj B Y; Krooshof, Daan G M; Westra, Tjalke A; Pechlivanoglou, Petros; Postma, Maarten J

2013-08-01

There has been substantial debate on the need for decreasing discounting for monetary and health gains in economic evaluations. Next to the discussion on differential discounting, a way to identify the need for such discounting strategies is through eliciting the time preferences for monetary and health outcomes. In this article, the authors investigate the perceived time preference for money and health gains through a pilot survey on Dutch university students using methods on functional forms previously suggested. Formal objectives of the study were to review such existing methods and to pilot them on a convenience sample using a questionnaire designed for this specific purpose. Indeed, a negative relation between the time of delay and the variance of the discounting rate for all models was observed. This study was intended as a pilot for a large-scale population-based investigation using the findings from this pilot on wording of the questionnaire, interpretation, scope and analytic framework.

Study on the evaluation method of radiation dose rate around spent fuel shipping casks

International Nuclear Information System (INIS)

Yamakoshi, Hisao

1986-01-01

This study aims at developing a simple calculation method which can evaluate radiation dose rate around casks with high accuracy in a short time. The method is based on a concept of the radiation shielding characteristics of cask walls. The concept was introduced to replace for ordinary radiation shielding calculation which requires a long calculation time and a large memory capacity of a computer in the matrix calculation. For the purpose of verifying the accuracy and reliability of the new method, it was applied to the analysis of the dose rate distribution around actual casks, which had been measured. The results of the analysis revealed that the newly proposed method was excellent for the forecast of radiation dose rate distribution around casks in view of the accuracy and calculation time. The short calculation time and high accuracy by the proposed method were attained by dividing the whole procedure of ordinary fine radiation shielding calculation into the calculation of radiation dose rate on a cask surface by the matrix expression of the characteristic function and the calculation of dose rate distribution using the simple analytical expression of dose rate distribution around casks. The effect of the heterogeneous array of spent fuel in different burnup state on dose rate distribution around casks was evaluated by this method. (Kako, I.)

Relationship between relative cerebral blood flow, relative cerebral blood volume, and relative cerebral metabolic rate of oxygen in the preterm neonatal brain.

Science.gov (United States)

Nourhashemi, Mina; Kongolo, Guy; Mahmoudzadeh, Mahdi; Goudjil, Sabrina; Wallois, Fabrice

2017-04-01

The mechanisms responsible for coupling between relative cerebral blood flow (rCBF), relative cerebral blood volume (rCBV), and relative cerebral metabolic rate of oxygen ([Formula: see text]), an important function of the microcirculation in preterm infants, remain unclear. Identification of a causal relationship between rCBF-rCBV and [Formula: see text] in preterms may, therefore, help to elucidate the principles of cortical hemodynamics during development. We simultaneously recorded rCBF and rCBV and estimated [Formula: see text] by two independent acquisition systems: diffuse correlation spectroscopy and near-infrared spectroscopy, respectively, in 10 preterms aged between 28 and 35 weeks of gestational age. Transfer entropy was calculated in order to determine the directionality between rCBF-rCBV and [Formula: see text]. The surrogate method was applied to determine statistical significance. The results show that rCBV and [Formula: see text] have a predominant driving influence on rCBF at the resting state in the preterm neonatal brain. Statistical analysis robustly detected the correct directionality of rCBV on rCBF and [Formula: see text] on rCBF. This study helps to clarify the early organization of the rCBV-rCBF and [Formula: see text] inter-relationship in the immature cortex.

Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 The purpose of this test method is to define a general procedure for determining an unknown thermal-neutron fluence rate by neutron activation techniques. It is not practicable to describe completely a technique applicable to the large number of experimental situations that require the measurement of a thermal-neutron fluence rate. Therefore, this method is presented so that the user may adapt to his particular situation the fundamental procedures of the following techniques. 1.1.1 Radiometric counting technique using pure cobalt, pure gold, pure indium, cobalt-aluminum, alloy, gold-aluminum alloy, or indium-aluminum alloy. 1.1.2 Standard comparison technique using pure gold, or gold-aluminum alloy, and 1.1.3 Secondary standard comparison techniques using pure indium, indium-aluminum alloy, pure dysprosium, or dysprosium-aluminum alloy. 1.2 The techniques presented are limited to measurements at room temperatures. However, special problems when making thermal-neutron fluence rate measurements in high-...

A Galvanic Coupling Method for Assessing Hydration Rates

Directory of Open Access Journals (Sweden)

Clement Ogugua Asogwa

2016-07-01

Full Text Available Recent advances in biomedical sensors, data acquisition techniques, microelectronics and wireless communication systems opened up the use of wearable technology for ehealth monitoring. We introduce a galvanic coupled intrabody communication for monitoring human body hydration. Studies in hydration provide the information necessary for understanding the desired fluid levels for optimal performance of the body’s physiological and metabolic processes during exercise and activities of daily living. Current measurement techniques are mostly suitable for laboratory purposes due to their complexity and technical requirements. Less technical methods such as urine color observation and skin turgor testing are subjective and cannot be integrated into a wearable device. Bioelectrical impedance methods are popular but mostly used for estimating total body water with limited accuracy and sensitive to 800 mL–1000 mL change in body fluid levels. We introduce a non-intrusive and simple method of tracking hydration rates that can detect up to 1.30 dB reduction in attenuation when as little as 100 mL of water is consumed. Our results show that galvanic coupled intrabody signal propagation can provide qualitative hydration and dehydration rates in line with changes in an individual’s urine specific gravity and body mass. The real-time changes in galvanic coupled intrabody signal attenuation can be integrated into wearable electronic devices to evaluate body fluid levels on a particular area of interest and can aid diagnosis and treatment of fluid disorders such as lymphoedema.

Estimation in adults of the glomerular filtration rate in [99mTc] DTPA renography - the rate constant method

International Nuclear Information System (INIS)

Carlsen, Ove

2004-01-01

The purpose of this study was to design an alternative and robust method for estimation of glomerular filtration rate (GFR) in [ 99 mTc]-diethylenetriaminepentaacetic acid ([ 99 mTc] -DTPA renography with a reliability not significantly lower than that of the conventional Gates' method. Methods: The method is based on renographies lasting 40 min in which regions of interest (ROIs) are manually created over selected parts of certain blood pools (e.g. heart, lungs, spleen, and liver). For each ROI the corresponding time-activity curve (TAC) was generated, decay corrected and exposed to a monoexponential fit in the time interval 10 to 40 min postinjection. The rate constant in min-1 of the monoexponential fit was denoted BETA. Following an iterative procedure comprising usually 5-10 manually created ROIs, the monoexponential fit with the maximum rate constant (BETA max ) was used for estimation of GFR. Results: In a patient material of 54 adult subjects in whom GFR was determined with multiple or one sample techniques with [ 51 Cr]-ethylenediaminetetraacetic acid ([ 51 Cr]-EDTA) the regression curve of standard GFR (GFR std ) (i.e. GFR adjusted to 1.73 m 2 body surface area) showed a close, non-linear relationship with BETA max with a correlation coefficient of 95%. The standard errors of estimate (SEE) were 6.6, 10.6 and 16.8 for GFR std equal to 30, 60, and 120 ml/(min .73 m 2 ), respectively. The corresponding SEE values for almost the same patient material using Gates' method were 8.4, 11.9, and 16.8 ml/(min 1.73 m 2 ). Conclusions: The alternative rate constant method yields estimates of GFR std with SEE values equal to or slightly smaller than in Gates' method. The two methods provide statistically uncorrelated estimates of GFR std . Therefore, pooled estimates of GFR std can be calculated with SEE values approximately 1.41 times smaller than those mentioned above. The reliabilities of the pooled estimate of GFR std separately and of the multiple samples method

Lidar method to estimate emission rates from extended sources

Science.gov (United States)

Currently, point measurements, often combined with models, are the primary means by which atmospheric emission rates are estimated from extended sources. However, these methods often fall short in their spatial and temporal resolution and accuracy. In recent years, lidar has emerged as a suitable to...

Heart rate variability in sleep-related migraine without aura.

Science.gov (United States)

Vollono, Catello; Gnoni, Valentina; Testani, Elisa; Dittoni, Serena; Losurdo, Anna; Colicchio, Salvatore; Di Blasi, Chiara; Mazza, Salvatore; Farina, Benedetto; Della Marca, Giacomo

2013-07-15

This is an observational study aimed to investigate the activity of autonomic nervous system during sleep in patients with sleep-related migraine. Eight consecutive migraineurs without aura were enrolled (6 women and 2 men), aged 30 to 62 years (mean 48.1 ± 9.3 years). Inclusion criteria were: high frequency of attacks (> 5 per month) and occurrence of more than 75% of the attacks during sleep causing an awakening. Patients were compared with a control group of 55 healthy subjects (23 men and 32 women, mean age 54.2 ± 13.0 years), and with a further control group of 8 age- and gender-matched healthy controls. Patient and controls underwent polysomnography and heart rate variability analysis. A significant reduction of the LF/HF ratio during N2 and N3 sleep stages was observed in migraineurs compared with controls. No differences in sleep macrostructure were observed; cyclic alternating pattern (CAP) time and CAP rate were lower in migraineurs than in controls. These findings indicate a peculiar modification of the autonomic balance during sleep in sleep-related migraine. The reduction of LF/HF ratio in NREM sleep was observed in controls, but it was quantitatively much more evident in migraineurs. Changes in LF/HF could be consequent to an autonomic unbalance which could manifest selectively (or alternatively become more evident) during sleep. These findings, together with the reduction in CAP rate, could be an expression of reduced arousability during sleep in patients with sleep-related migraine. The simultaneous involvement of the autonomic, arousal, and pain systems might suggest involvement of the hypothalamic pathways.

Self-rated health and sickness-related absence: the modifying role of civic participation

NARCIS (Netherlands)

Lancee, B.; ter Hoeven, C.L.

2010-01-01

In this study, we examined civic participation as an effect modifier between self-rated health and absence from work. Building on the theoretical framework of social exchange, we use German data to test a conceptual model relating self-rated health to sickness-related absence, as well as the

Functional Assessment of the Stomatognathic System, after the Treatment of Edentulous Patients, with Different Methods of Establishing the Centric Relation.

Science.gov (United States)

Nitecka-Buchta, Aleksandra; Proba, Thomas; Proba, Paulina; Stefański, Kamil; Baron, Stefan

2018-01-01

The study compares subjective experiences of patients, wearing complete dentures. Two different methods of determining a centric relation were performed: the traditional method using wax occlusal rims and the Gerber method, based on gothic arch tracings. The success rate of establishing a centric relation in both methods was evaluated (rentgenodiagnostics). The influence of the method used to obtain the centric relation on patients' stomatognathic system (condyle centralization, pain) was also evaluated. Better results were achieved in gothic arch tracing method. Before every prosthetic treatment of edentulous patients, a functional analysis of the TMJ is necessary. The lack of centric relation, in a long term adaptation patients, does not lead to TMD symptoms. This trial is registered with NCT03343015.

Scale factor measure method without turntable for angular rate gyroscope

Science.gov (United States)

Qi, Fangyi; Han, Xuefei; Yao, Yanqing; Xiong, Yuting; Huang, Yuqiong; Wang, Hua

2018-03-01

In this paper, a scale factor test method without turntable is originally designed for the angular rate gyroscope. A test system which consists of test device, data acquisition circuit and data processing software based on Labview platform is designed. Taking advantage of gyroscope's sensitivity of angular rate, a gyroscope with known scale factor, serves as a standard gyroscope. The standard gyroscope is installed on the test device together with a measured gyroscope. By shaking the test device around its edge which is parallel to the input axis of gyroscope, the scale factor of the measured gyroscope can be obtained in real time by the data processing software. This test method is fast. It helps test system miniaturized, easy to carry or move. Measure quarts MEMS gyroscope's scale factor multi-times by this method, the difference is less than 0.2%. Compare with testing by turntable, the scale factor difference is less than 1%. The accuracy and repeatability of the test system seems good.

An examination of black/white differences in the rate of age-related mortality increase

Directory of Open Access Journals (Sweden)

Andrew Fenelon

2013-09-01

Full Text Available BACKGROUND The rate of mortality increase with age among adults is typically used as a measure of the rate of functional decline associated with aging or senescence. While black and white populations differ in the level of mortality, mortality also rises less rapidly with age for blacks than for whites, leading to the well-known black/white mortality "crossover". OBJECTIVE This paper investigates black/white differences in the rate of mortality increase with age for major causes of death in order to examine the factors responsible for the black/white crossover. METHODS The analysis considers two explanations for the crossover: selective survival and age misreporting. Mortality is modeled using a Gompertz model for 11 causes of death from ages 50-84 among blacks and whites by sex. RESULTS Mortality increases more rapidly with age for whites than for blacks for nearly all causes of death considered. The all-cause mortality rate of mortality increase is nearly two percentage points higher for whites. The analysis finds evidence for both selective survival and age misreporting, although age misreporting is a more prominent explanation among women. CONCLUSIONS The black/white mortality crossover reflects large differences in the rate of age-related mortality increase. Instead of reflecting the impact of specific causes of death, this pattern exists across many disparate disease conditions, indicating the need for a broad explanation.

Exchange Rate and Interest Rate in the Monetary Policy Reaction Function

Directory of Open Access Journals (Sweden)

Krušković Borivoje D.

2017-01-01

Full Text Available In recent years there has been a particular interest in the relation between exchange rates and interest rates both in developed countries and emerging countries. This is understandable given the important role that these variables have in determining the movement of nominal and real economic variables, including the movement of domestic inflation, real output, exports and imports, foreign exchange reserves, etc. To realized the importance of the given instruments selected macroeconomic indicators, data analysis (monthly data relating to Serbia was made on the basis of the Transfer Function Model, a data analysis (annual data relating to emerging countries was done on the basis of the Stepvise Multiple Regression model. In the transfer function model we used the Maximum Likelihood method for assessing unknown coefficients. In the gradual multiple regression model we used the Least Square method for the evaluation of unknown coefficients. All indicator values were used in the original unmodified form, i.e. there was no need for a variety of transformations. Empirical analysis showed that the exchange rate is a more significant transmission mechanism than the interest rate both in emerging markets and Serbia.

An experimental comparison of three wire beam electrode based methods for determining corrosion rates and patterns

International Nuclear Information System (INIS)

Tan, Y.-J.

2005-01-01

Laboratory experiments have been carried out to examine the advantages and limitations of three wire beam electrode (WBE) based techniques, including the noise resistance R n -WBE method, the overpotential-galvanic current method, and the galvanic current method, in determining corrosion rates and patterns. These techniques have been applied simultaneously to several selected corrosion systems of different characteristics. It has been found that the R n -WBE method has advantages over other WBE based methods when applying to WBE surfaces under uniform corrosion. However, the R n -WBE method has been found to be unsuitable for low noise level corrosion systems. It has also been found that both R n -WBE and overpotential-galvanic current methods are similarly applicable to WBE surfaces under nonuniform corrosion. However, the galvanic current method has been found to be suitable only for WBE surfaces under highly localised corrosion. Some related issues regarding R n calculation such as trend removal and its effects on corrosion mapping have also been discussed

Female song rates in response to simulated intruder are positively related to reproductive success.

Directory of Open Access Journals (Sweden)

Kristal E Cain

2015-10-01

Full Text Available Bird song is well studied in males as a sexually selected behavior. However, although song is also common among females, it is infrequently examined and poorly understood. Research suggests that song is often used as a resource defense behavior and is important in female-female competition for limited resources, e.g. mates and territories. If so, song should be positively related to fitness and related to other resource defense behaviors, but this possibility has rarely been explored. Here we examine fitness estimates in relation to spontaneous song rates and song rates in response to a simulated intruder (playback, in the superb fairy-wren (Malurus cyaneus, a cooperatively breeding songbird. We also determine how song rates relate to other territorial defense behaviors. Song rate in response to playback, but not spontaneous song rate, was positively related to nest success and the number of fledglings produced by successful females. Further, response song rate was also correlated with other territorial defense behaviors (latency to respond and flights. This evidence supports the hypothesis that female song may be used in the context of female-female competition to improve access to limited reproductive resources, and suggests that song may provide direct fitness benefits.

Oral health-related quality of life in youth receiving cleft-related surgery: self-report and proxy ratings.

Science.gov (United States)

Broder, Hillary L; Wilson-Genderson, Maureen; Sischo, Lacey

2017-04-01

This paper evaluated the impact of cleft-related surgery on the oral health-related quality of life (OHRQoL) of youth with cleft over time. Data were derived from a 5-year, multi-center, prospective, longitudinal study of 1196 youth with cleft lip and/or palate and their caregivers. Eligible youth were between 7.5 and 18.5 years old, spoke English or Spanish, and were non-syndromic. During each observational period, which included baseline, and 1- and 2-year post-baseline follow-up visits, youths and their caregivers completed the Child Oral Health Impact Profile, a validated measure of OHRQoL. Multilevel mixed-effects models were used to analyze the effects of receipt of craniofacial surgery on OHRQoL over time. During the course of this study a total of 516 patients (43 %) received at least one surgery. Youth in the surgery recommendation group had lower self- (β = -2.18, p self- and proxy-rated OHRQoL at baseline. Both surgical and non-surgical youth (β = 3.73, p self-reported OHRQoL for youth postsurgery (β = 1.04, p self- and caregiver-rated OHRQoL when compared to non-surgical youth. Youth who underwent cleft-related surgery had significant incremental improvements in self-rated but not caregiver (proxy)-rated OHRQoL after surgery.

Methods for measuring specific rates of mercury methylation and degradation and their use in determining factors controlling net rates of mercury methylation

International Nuclear Information System (INIS)

Ramlal, P.S.; Rudd, J.W.M.; Hecky, R.E.

1986-01-01

A method was developed to estimate specific rates of demethylation of methyl mercury in aquatic samples by measuring the volatile 14 C end products of 14 CH 3 HgI demethylation. This method was used in conjuction with a 203 Hg 2+ radiochemical method which determines specific rates of mercury methylation. Together, these methods enabled us to examine some factors controlling the net rate of mercury methylation. The methodologies were field tested, using lake sediment samples from a recently flooded reservoir in the Southern Indian Lake system which had developed a mercury contamination problem in fish. Ratios of the specific rates of methylation/demethylation were calculated. The highest ratios of methylation/demethylation were calculated. The highest ratios of methylation/demethylation occurred in the flooded shorelines of Southern Indian Lake. These results provide an explanation for the observed increases in the methyl mercury concentrations in fish after flooding

Methods for monitoring corals and crustose coralline algae to quantify in-situ calcification rates

Science.gov (United States)

Morrison, Jennifer M.; Kuffner, Ilsa B.; Hickey, T. Don

2013-01-01

The potential effect of global climate change on calcifying marine organisms, such as scleractinian (reef-building) corals, is becoming increasingly evident. Understanding the process of coral calcification and establishing baseline calcification rates are necessary to detect future changes in growth resulting from climate change or other stressors. Here we describe the methods used to establish a network of calcification-monitoring stations along the outer Florida Keys Reef Tract in 2009. In addition to detailing the initial setup and periodic monitoring of calcification stations, we discuss the utility and success of our design and offer suggestions for future deployments. Stations were designed such that whole coral colonies were securely attached to fixed apparati (n = 10 at each site) on the seafloor but also could be easily removed and reattached as needed for periodic weighing. Corals were weighed every 6 months, using the buoyant weight technique, to determine calcification rates in situ. Sites were visited in May and November to obtain winter and summer rates, respectively, and identify seasonal patterns in calcification. Calcification rates of the crustose coralline algal community also were measured by affixing commercially available plastic tiles, deployed vertically, at each station. Colonization by invertebrates and fleshy algae on the tiles was low, indicating relative specificity for the crustose coralline algal community. We also describe a new, nonlethal technique for sampling the corals, used following the completion of the monitoring period, in which two slabs were obtained from the center of each colony. Sampled corals were reattached to the seafloor, and most corals had completely recovered within 6 months. The station design and sampling methods described herein provide an effective approach to assessing coral and crustose coralline algal calcification rates across time and space, offering the ability to quantify the potential effects of

Increased use of lethal methods and annual increase of suicide rates in Korean adolescents: comparison with adolescents in the United States.

Science.gov (United States)

Park, Subin; Cho, Soo-Churl; Kim, Bung-Nyun; Kim, Jae-Won; Yoo, Hee Jeong; Hong, Jin Pyo

2014-03-01

The lethality of the suicide method is a strong risk factor for completed suicide. We examined whether the annual change in the pattern of suicide methods was related to the annual change in suicide rates among adolescents in South Korea and the United States. We analyzed annual data for the 2000-2009 period for South Korea and the 2000-2008 period for the United States to examine time trends in the suicide rates and suicide methods of adolescents aged 10-19 years in two countries. Data on suicide methods were obtained from the World Health Organization (WHO) mortality database. Suicide rates among adolescents in the United States have remained relatively steady since 2000, whereas the suicide among Korean adolescents has increased. Between 2000 and 2009, the most common suicide method among Korean adolescents was jumping for boys and girls, whereas it was hanging for girls and firearms for boys in the United States. Along with the annual increase in suicide rates in South Korea, the incidences of jumping among males and hanging (and recently jumping) among females have increased steadily, whereas suicide by self-poisoning steadily decreased. In the United States, between 2000 and 2008, the proportion of suicides committed by hanging increased, whereas those committed using firearms steadily decreased, particularly among adolescent females. These findings suggest that the increased use of lethal suicide methods is reflected in the increase in suicide rates in Korean adolescents. The most fruitful approach to addressing the rises in jumping suicides among Korean adolescents and hanging suicides among adolescents in the United States may be through population-based initiatives to reduce the physical availability (e.g., limiting access to or fencing off tall structures) and the social acceptability (e.g., effective and responsible regulations for reporting suicide) of these methods. © 2013 The Authors. Journal of Child Psychology and Psychiatry © 2013 Association

A comparison of surveillance methods for small incidence rates

Energy Technology Data Exchange (ETDEWEB)

Sego, Landon H.; Woodall, William H.; Reynolds, Marion R.

2008-05-15

A number of methods have been proposed to detect an increasing shift in the incidence rate of a rare health event, such as a congenital malformation. Among these are the Sets method, two modifcations of the Sets method, and the CUSUM method based on the Poisson distribution. We consider the situation where data are observed as a sequence of Bernoulli trials and propose the Bernoulli CUSUM chart as a desirable method for the surveillance of rare health events. We compare the performance of the Sets method and its modifcations to the Bernoulli CUSUM chart under a wide variety of circumstances. Chart design parameters were chosen to satisfy a minimax criteria.We used the steady- state average run length to measure chart performance instead of the average run length which was used in nearly all previous comparisons involving the Sets method or its modifcations. Except in a very few instances, we found that the Bernoulli CUSUM chart has better steady-state average run length performance than the Sets method and its modifcations for the extensive number of cases considered.

In situ feeding rates of plantonic copepods: A comparison of four methods

DEFF Research Database (Denmark)

Kiørboe, Thomas; Møhlenberg, Flemming; Riisgård, Hans Ulrik

1985-01-01

into estimates of in situ algal grazing rates by means of independently estimated gut turnover times, and were compared with chlorophyll and particle-volume grazing rates of animals sampled simultaneously and incubated in water from the collection depth. In addition, egg-production rates of adult females were...... problems of the different methods are discussed, and it is concluded that they all approach representative (although minimum) estimates of in situ feeding rates....

Development of the pressure-time method as a relative and absolute method for low-head hydraulic machines

Energy Technology Data Exchange (ETDEWEB)

Jonsson, Pontus [Poeyry SwedPower AB, Stockholm (Sweden); Cervantes, Michel [Luleaa Univ. of Technology, Luleaa (Sweden)

2013-02-15

The pressure-time method is an absolute method common for flow measurements in power plants. The method determines the flow rate by measuring the pressure and estimating the losses between two sections in the penstock during a closure of the guide vanes. The method has limitations according to the IEC41 standard, which makes it difficult to use at Swedish plants where the head is generally low. This means that there is limited experience/knowledge in Sweden on this method, where the Winter-Kennedy is usually used. Since several years, Luleaa University of Technology works actively in the development of the pressure-time method for low-head hydraulic machines with encouraging results. Focus has been in decreasing the distance between both measuring sections and evaluation of the viscous losses. Measurements were performed on a pipe test rig (D=0.3 m) in a laboratory under well controlled conditions with 7rate, up to 0.3%. As an alternative to the Winter-Kennedy widely used in Sweden, the pressure-time method was tested as a relative method by measuring the pressure between the free surface and a section in the penstock without knowing the exact geometry, i.e., pipe factor. Such measurements may be simple to perform as most of the inlet spiral casings have pressure taps. Furthermore, the viscous losses do not need to be accurately determined as long as they are handled similarly between the measurements. The pressure-time method may thus become an alternative to the Winter-Kennedy.

Combining Review Text Content and Reviewer-Item Rating Matrix to Predict Review Rating

Science.gov (United States)

Wang, Bingkun; Huang, Yongfeng; Li, Xing

2016-01-01

E-commerce develops rapidly. Learning and taking good advantage of the myriad reviews from online customers has become crucial to the success in this game, which calls for increasingly more accuracy in sentiment classification of these reviews. Therefore the finer-grained review rating prediction is preferred over the rough binary sentiment classification. There are mainly two types of method in current review rating prediction. One includes methods based on review text content which focus almost exclusively on textual content and seldom relate to those reviewers and items remarked in other relevant reviews. The other one contains methods based on collaborative filtering which extract information from previous records in the reviewer-item rating matrix, however, ignoring review textual content. Here we proposed a framework for review rating prediction which shows the effective combination of the two. Then we further proposed three specific methods under this framework. Experiments on two movie review datasets demonstrate that our review rating prediction framework has better performance than those previous methods. PMID:26880879

Combining Review Text Content and Reviewer-Item Rating Matrix to Predict Review Rating.

Science.gov (United States)

Wang, Bingkun; Huang, Yongfeng; Li, Xing

2016-01-01

E-commerce develops rapidly. Learning and taking good advantage of the myriad reviews from online customers has become crucial to the success in this game, which calls for increasingly more accuracy in sentiment classification of these reviews. Therefore the finer-grained review rating prediction is preferred over the rough binary sentiment classification. There are mainly two types of method in current review rating prediction. One includes methods based on review text content which focus almost exclusively on textual content and seldom relate to those reviewers and items remarked in other relevant reviews. The other one contains methods based on collaborative filtering which extract information from previous records in the reviewer-item rating matrix, however, ignoring review textual content. Here we proposed a framework for review rating prediction which shows the effective combination of the two. Then we further proposed three specific methods under this framework. Experiments on two movie review datasets demonstrate that our review rating prediction framework has better performance than those previous methods.

Functional Assessment of the Stomatognathic System, after the Treatment of Edentulous Patients, with Different Methods of Establishing the Centric Relation

Directory of Open Access Journals (Sweden)

Aleksandra Nitecka-Buchta

2018-01-01

Full Text Available The study compares subjective experiences of patients, wearing complete dentures. Two different methods of determining a centric relation were performed: the traditional method using wax occlusal rims and the Gerber method, based on gothic arch tracings. The success rate of establishing a centric relation in both methods was evaluated (rentgenodiagnostics. The influence of the method used to obtain the centric relation on patients’ stomatognathic system (condyle centralization, pain was also evaluated. Better results were achieved in gothic arch tracing method. Before every prosthetic treatment of edentulous patients, a functional analysis of the TMJ is necessary. The lack of centric relation, in a long term adaptation patients, does not lead to TMD symptoms. This trial is registered with NCT03343015.

Assessment of the relative merits of a few methods to detect evolutionary trends.

Science.gov (United States)

Laurin, Michel

2010-12-01

Some of the most basic questions about the history of life concern evolutionary trends. These include determining whether or not metazoans have become more complex over time, whether or not body size tends to increase over time (the Cope-Depéret rule), or whether or not brain size has increased over time in various taxa, such as mammals and birds. Despite the proliferation of studies on such topics, assessment of the reliability of results in this field is hampered by the variability of techniques used and the lack of statistical validation of these methods. To solve this problem, simulations are performed using a variety of evolutionary models (gradual Brownian motion, speciational Brownian motion, and Ornstein-Uhlenbeck), with or without a drift of variable amplitude, with variable variance of tips, and with bounds placed close or far from the starting values and final means of simulated characters. These are used to assess the relative merits (power, Type I error rate, bias, and mean absolute value of error on slope estimate) of several statistical methods that have recently been used to assess the presence of evolutionary trends in comparative data. Results show widely divergent performance of the methods. The simple, nonphylogenetic regression (SR) and variance partitioning using phylogenetic eigenvector regression (PVR) with a broken stick selection procedure have greatly inflated Type I error rate (0.123-0.180 at a 0.05 threshold), which invalidates their use in this context. However, they have the greatest power. Most variants of Felsenstein's independent contrasts (FIC; five of which are presented) have adequate Type I error rate, although two have a slightly inflated Type I error rate with at least one of the two reference trees (0.064-0.090 error rate at a 0.05 threshold). The power of all contrast-based methods is always much lower than that of SR and PVR, except under Brownian motion with a strong trend and distant bounds. Mean absolute value of error

Life span prediction from the rate of age-related DNA demethylation in normal and cancer cell lines.

Science.gov (United States)

Mazin, A L

1995-01-01

A method has been proposed for the Hayflick Limit prediction by the analysis of the 5-methylcytosine content in DNA at earlier and later cell passages. The following facts were used as the basis of the method: (i) the rate of m5C loss from DNA remains approximately constant during cell divisions and it does not depend on the cell donor age; (ii) this rate is inversely proportional to the Hayflick Limit as well as to the life span of cell donor species; (iii) the period corresponded to loss of all m5C residues from the genome coincides with or somewhat exceeds the Hayflick Limit of normal cells. The prognosis of the Hayflick Limit has usually been found in good agreement with the experimental evidences for various human, hamster, and mouse cell lines. The method proposed may be used for early detection of precrisis and cancer cells. The age-related m5C loss may result from accumulation of the m5C-->T+C transitions occurring with DNA methylation in every cell division.

Comparing methods for measuring the rate of spread of invading populations

Science.gov (United States)

Marius Gilbert; Andrew. Liebhold

2010-01-01

Measuring rates of spread during biological invasions is important for predicting where and when invading organisms will spread in the future as well as for quantifying the influence of environmental conditions on invasion speed. While several methods have been proposed in the literature to measure spread rates, a comprehensive comparison of their accuracy when applied...

Simple relations between mean passage times and Kramers' stationary rate

International Nuclear Information System (INIS)

Boilley, David; Jurado, Beatriz; Schmitt, Christelle

2004-01-01

The classical problem of the escape time of a metastable potential well in a thermal environment is generally studied by various quantities like Kramers' stationary escape rate, mean first passage time, nonlinear relaxation time, or mean last passage time. In addition, numerical simulations lead to the definition of other quantities as the long-time limit escape rate and the transient time. In this paper, we propose some simple analytical relations between all these quantities. In particular, we point out the hypothesis used to evaluate these various times in order to clarify their comparison and applicability, and show how average times include the transient time and the long-time limit of the escape rate

Diversification rates are more strongly related to microhabitat than climate in squamate reptiles (lizards and snakes).

Science.gov (United States)

Bars-Closel, Melissa; Kohlsdorf, Tiana; Moen, Daniel S; Wiens, John J

2017-09-01

Patterns of species richness among clades can be directly explained by the ages of clades or their rates of diversification. The factors that most strongly influence diversification rates remain highly uncertain, since most studies typically consider only a single predictor variable. Here, we explore the relative impacts of macroclimate (i.e., occurring in tropical vs. temperate regions) and microhabitat use (i.e., terrestrial, fossorial, arboreal, aquatic) on diversification rates of squamate reptile clades (lizards and snakes). We obtained data on microhabitat, macroclimatic distribution, and phylogeny for >4000 species. We estimated diversification rates of squamate clades (mostly families) from a time-calibrated tree, and used phylogenetic methods to test relationships between diversification rates and microhabitat and macroclimate. Across 72 squamate clades, the best-fitting model included microhabitat but not climatic distribution. Microhabitat explained ∼37% of the variation in diversification rates among clades, with a generally positive impact of arboreal microhabitat use on diversification, and negative impacts of fossorial and aquatic microhabitat use. Overall, our results show that the impacts of microhabitat on diversification rates can be more important than those of climate, despite much greater emphasis on climate in previous studies. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

The correlation between pH and flow rate of salivary smokers related to nicotine levels labelled on cigarettes

Directory of Open Access Journals (Sweden)

Dewi Saputri

2017-06-01

Full Text Available Background: Saliva is a biological fluid in oral cavity that plays a role in maintaining the environmental balance and oral commensal. Nicotine of cigarettes has been reported as a predisposing factor for changing of pH and salivary flow rate, thereby changing in biological salivary components. Purpose: This study aimed to analyze the correlation between salivary pH and salivary flow rate in smokers with nicotine levels labeled on cigarettes. Methods: Purposive sampling was conducted involving 40 male smokers. Before participating, they filled a questionnaire related to the history of their smoking habit. Using a spitting method for 5 minutes their saliva was collected. Results: Result of Pearson correlation test showed that there was a significant correlation between smoking intensity and salivary flow rate of those smokers (r = -0.486 and p0.512. There was no correlation between nicotine levels labeled on cigarettes and salivary pH of those smokers (r = -0.216, p>0.181. Nevertheless, there was a significant correlation between salivary flow rate and salivary pH of those smokers (r= 0.686, p<0.00,. Conclusion: There is a strong correlation between the intensity of smoking with salivary flow rate and its pH. However, there is no correlation between nicotine levels labeled on cigarettes and both salivary flow rate as well as salivary pH.

The work-related fatal injury study: numbers, rates and trends of work-related fatal injuries in New Zealand 1985-1994.

Science.gov (United States)

Feyer, A M; Langley, J; Howard, M; Horsburgh, S; Wright, C; Alsop, J; Cryer, C

2001-01-26

To determine the number and rates of work-related fatal injuries by employment status, occupation, industry, age and gender in New Zealand 1985-1994. Potential cases of work-related injury deaths of persons aged 15-84 years were identified from the national electronic mortality data files. Main exclusions were deaths due to suicide and deaths due to motor vehicle crashes. The circumstances of the deaths of each fatal incident meeting inclusion criteria were then reviewed directly from coronial files to determine work-relatedness. The rate of work-related fatal injury in New Zealand was 5.03/100000 workers per year for the study period. There was a significant decline in crude rate over the study period. However, this was in substantial part accounted for by changes in occupation and industry mix. Older workers, male workers, self-employed workers, and particular occupational groups, all had substantially elevated rates. Agricultural and helicopter pilots, forestry workers and fishery workers had the highest rates. Farmers, forestry workers, and fishery workers also had high numbers of deaths, together accounting for nearly 40% of all deaths. This study has demonstrated that work-related fatal injury remains a pressing problem for New Zealand. Several areas in urgent need of prevention efforts were highlighted.

A gamma camera count rate saturation correction method for whole-body planar imaging

Science.gov (United States)

Hobbs, Robert F.; Baechler, Sébastien; Senthamizhchelvan, Srinivasan; Prideaux, Andrew R.; Esaias, Caroline E.; Reinhardt, Melvin; Frey, Eric C.; Loeb, David M.; Sgouros, George

2010-02-01

Whole-body (WB) planar imaging has long been one of the staple methods of dosimetry, and its quantification has been formalized by the MIRD Committee in pamphlet no 16. One of the issues not specifically addressed in the formalism occurs when the count rates reaching the detector are sufficiently high to result in camera count saturation. Camera dead-time effects have been extensively studied, but all of the developed correction methods assume static acquisitions. However, during WB planar (sweep) imaging, a variable amount of imaged activity exists in the detector's field of view as a function of time and therefore the camera saturation is time dependent. A new time-dependent algorithm was developed to correct for dead-time effects during WB planar acquisitions that accounts for relative motion between detector heads and imaged object. Static camera dead-time parameters were acquired by imaging decaying activity in a phantom and obtaining a saturation curve. Using these parameters, an iterative algorithm akin to Newton's method was developed, which takes into account the variable count rate seen by the detector as a function of time. The algorithm was tested on simulated data as well as on a whole-body scan of high activity Samarium-153 in an ellipsoid phantom. A complete set of parameters from unsaturated phantom data necessary for count rate to activity conversion was also obtained, including build-up and attenuation coefficients, in order to convert corrected count rate values to activity. The algorithm proved successful in accounting for motion- and time-dependent saturation effects in both the simulated and measured data and converged to any desired degree of precision. The clearance half-life calculated from the ellipsoid phantom data was calculated to be 45.1 h after dead-time correction and 51.4 h with no correction; the physical decay half-life of Samarium-153 is 46.3 h. Accurate WB planar dosimetry of high activities relies on successfully compensating

Prospects for DNA methods to measure human heritable mutation rates

International Nuclear Information System (INIS)

Mendelsohn, M.L.

1985-01-01

A workshop cosponsored by ICPEMC and the US Department of Energy was held in Alta, Utah, December 9-13, 1984 to examine the extent to which DNA-oriented methods might provide new approaches to the important but intractable problem of measuring mutation rates in control and exposed human populations. The workshop identified and analyzed six DNA methods for detection of human heritable mutation, including several created at the meeting, and concluded that none of the methods combine sufficient feasibility and efficiency to be recommended for general application. 8 refs

Probing the effect of human normal sperm morphology rate on cycle outcomes and assisted reproductive methods selection.

Directory of Open Access Journals (Sweden)

Bo Li

Full Text Available Sperm morphology is the best predictor of fertilization potential, and the critical predictive information for supporting assisted reproductive methods selection. Given its important predictive value and the declining reality of semen quality in recent years, the threshold of normal sperm morphology rate (NSMR is being constantly corrected and controversial, from the 4th edition (14% to the 5th version (4%. We retrospectively analyzed 4756 cases of infertility patients treated with conventional-IVF(c-IVF or ICSI, which were divided into three groups according to NSMR: ≥14%, 4%-14% and <4%. Here, we demonstrate that, with decrease in NSMR(≥14%, 4%-14%, <4%, in the c-IVF group, the rate of fertilization, normal fertilization, high-quality embryo, multi-pregnancy and birth weight of twins gradually decreased significantly (P<0.05, while the miscarriage rate was significantly increased (p<0.01 and implantation rate, clinical pregnancy rate, ectopic pregnancy rate, preterm birth rate, live birth rate, sex ratio, and birth weight(Singleton showed no significant change. In the ICSI group, with decrease in NSMR (≥14%, 4%-14%, <4%, high-quality embryo rate, multi-pregnancy rate and birth weight of twins were gradually decreased significantly (p<0.05, while other parameters had no significant difference. Considering the clinical assisted methods selection, in the NFMR ≥14% group, normal fertilization rate of c-IVF was significantly higher than the ICSI group (P<0.05, in the 4%-14% group, birth weight (twins of c-IVF were significantly higher than the ICSI group, in the <4% group, miscarriage of IVF was significantly higher than the ICSI group. Therefore, we conclude that NSMR is positively related to embryo reproductive potential, and when NSMR<4% (5th edition, ICSI should be considered first, while the NSMR≥4%, c-IVF assisted reproduction might be preferred.

Automatic classification of transient ischaemic and transient non-ischaemic heart-rate related ST segment deviation episodes in ambulatory ECG records

International Nuclear Information System (INIS)

Faganeli, J; Jager, F

2010-01-01

In ambulatory ECG records, besides transient ischaemic ST segment deviation episodes, there are also transient non-ischaemic heart-rate related ST segment deviation episodes present, which appear only due to a change in heart rate and thus complicate automatic detection of true ischaemic episodes. The goal of this work was to automatically classify these two types of episodes. The tested features to classify the ST segment deviation episodes were changes of heart rate, changes of the Mahalanobis distance of the first five Karhunen–Loève transform (KLT) coefficients of the QRS complex, changes of time-domain morphologic parameters of the ST segment and changes of the Legendre orthonormal polynomial coefficients of the ST segment. We chose Legendre basis functions because they best fit typical shapes of the ST segment morphology, thus allowing direct insight into the ST segment morphology changes through the feature space. The classification was performed with the help of decision trees. We tested the classification method using all records of the Long-Term ST Database on all ischaemic and all non-ischaemic heart-rate related deviation episodes according to annotation protocol B. In order to predict the real-world performance of the classification we used second-order aggregate statistics, gross and average statistics, and the bootstrap method. We obtained the best performance when we combined the heart-rate features, the Mahalanobis distance and the Legendre orthonormal polynomial coefficient features, with average sensitivity of 98.1% and average specificity of 85.2%

Comparison on different repetition rate locking methods in Er-doped fiber laser

Science.gov (United States)

Yang, Kangwen; Zhao, Peng; Luo, Jiang; Huang, Kun; Hao, Qiang; Zeng, Heping

2018-05-01

We demonstrate a systematic comparative research on the all-optical, mechanical and opto-mechanical repetition rate control methods in an Er-doped fiber laser. A piece of Yb-doped fiber, a piezoelectric transducer and an electronic polarization controller are simultaneously added in the laser cavity as different cavity length modulators. By measuring the cavity length tuning ranges, the output power fluctuations, the temporal and frequency repetition rate stability, we show that all-optical method introduces the minimal disturbances under current experimental condition.

Linear constraint relations in biochemical reaction systems: I. Classification of the calculability and the balanceability of conversion rates.

Science.gov (United States)

van der Heijden, R T; Heijnen, J J; Hellinga, C; Romein, B; Luyben, K C

1994-01-05

Measurements provide the basis for process monitoring and control as well as for model development and validation. Systematic approaches to increase the accuracy and credibility of the empirical data set are therefore of great value. In (bio)chemical conversions, linear conservation relations such as the balance equations for charge, enthalpy, and/or chemical elements, can be employed to relate conversion rates. In a pactical situation, some of these rates will be measured (in effect, be calculated directly from primary measurements of, e.g., concentrations and flow rates), as others can or cannot be calculated from the measured ones. When certain measured rates can also be calculated from other measured rates, the set of equations, the accuracy and credibility of the measured rates can indeed be improved by, respectively, balancing and gross error diagnosis. The balanced conversion rates are more accurate, and form a consistent set of data, which is more suitable for further application (e.g., to calculate nonmeasured rates) than the raw measurements. Such an approach has drawn attention in previous studies. The current study deals mainly with the problem of mathematically classifying the conversion rates into balanceable and calculable rates, given the subset of measured rates. The significance of this problem is illustrated with some examples. It is shown that a simple matrix equation can be derived that contains the vector of measured conversion rates and the redundancy matrix R. Matrix R plays a predominant role in the classification problem. In supplementary articles, significance of the redundancy matrix R for an improved gross error diagnosis approach will be shown. In addition, efficient equations have been derived to calculate the balanceable and/or calculable rates. The method is completely based on matrix algebra (principally different from the graph-theoretical approach), and it is easily implemented into a computer program. (c) 1994 John Wiley & Sons

Rates of TBI-related Deaths by Age Group - United States, 2001 - 2010

Data.gov (United States)

U.S. Department of Health & Human Services — Changes in the rates of TBI-related deaths vary depending on age. For persons 44 years of age and younger, TBI-related deaths decreased between the periods of...

Root distribution pattern and nitrogen uptake of some wheat and triticale germplasms in relation to rates and methods of nitrogen application

International Nuclear Information System (INIS)

Meena, N.L.; Seth, Jagdish

1975-01-01

A field experiment was conducted under irrigated conditions with four germplasms viz. Triticale(70-2), and wheat varieties HD 4502(durum), Kalyan Sona and Moti (aestivums) at the Indian Agricultural Research Institute Farm, New Delhi, during rabi season of 1972-73. The treatments comprised of three rates of nitrogen viz. 0,60 and 120 kg/ha and two methods of nitrogen application viz. (1) soil + foliar and (2) soil. The root distribution of the four germplasms, studied by 32 P injection technique was increased both vertically and horizontally with the addition of nitrogen. Root distribution of triticale was observed to be deep and spreading in habit, while durum proved to be shallow rooted and compact in nature. The total uptake of nitrogen was significantly increased with higher rates of nitrogen in all the germplasms. The maximum uptake of nitrogen was observed in the durum wheat. (author)

Analysing the Progression Rates of Macular Lesions with Autofluorescence Imaging Modes in Dry Age-Related Macular Degeneration

Directory of Open Access Journals (Sweden)

Kenan Olcay

2015-12-01

Full Text Available Objectives: In this study we aimed to compare the sensitivity of blue-light fundus autofluorescence (FAF and near-infrared autofluorescence (NI-AF imaging for determining the progression rates of macular lesions in dry age-related macular degeneration (AMD. Materials and Methods: The study was designed retrospectively and included patients diagnosed with intermediate and advanced stage dry AMD. Best corrected visual acuities and FAF and NI-AF images were recorded in 46 eyes of 33 patients. Lesion borders were drawn manually on the images using Heidelberg Eye Explorer software and lesion areas were calculated by using Microsoft Excel software. BCVA and lesion areas were compared with each other. Results: Patients’ mean follow-up time was 30.98±13.30 months. The lesion area progression rates were 0.85±0.93 mm2/y in FAF and 0.93±1.01 mm2/y in NI-AF, showing statistically significant correlation with each other (r=0.883; p<0.01. Both imaging methods are moderately correlated with visual acuity impairment (r=0.362; p<0.05 and r=0.311; p<0.05, respectively. In addition, larger lesions showed higher progression rates than smaller ones in both imaging methods. Conclusion: NI-AF imaging is as important and effective as FAF imaging for follow-up of dry AMD patients.

THE MASS-METALLICITY RELATION WITH THE DIRECT METHOD ON STACKED SPECTRA OF SDSS GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Andrews, Brett H.; Martini, Paul, E-mail: andrews@astronomy.ohio-state.edu [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States)

2013-03-10

The relation between galaxy stellar mass and gas-phase metallicity is a sensitive diagnostic of the main processes that drive galaxy evolution, namely cosmological gas inflow, metal production in stars, and gas outflow via galactic winds. We employed the direct method to measure the metallicities of {approx}200,000 star-forming galaxies from the Sloan Digital Sky Survey that were stacked in bins of (1) stellar mass and (2) both stellar mass and star formation rate (SFR) to significantly enhance the signal-to-noise ratio of the weak [O III] {lambda}4363 and [O II] {lambda}{lambda}7320, 7330 auroral lines required to apply the direct method. These metallicity measurements span three decades in stellar mass from log(M{sub *}/M{sub Sun }) = 7.4-10.5, which allows the direct method mass-metallicity relation to simultaneously capture the high-mass turnover and extend a full decade lower in mass than previous studies that employed more uncertain strong line methods. The direct method mass-metallicity relation rises steeply at low mass (O/H {proportional_to} M{sub *} {sup 1/2}) until it turns over at log(M{sub *}/M{sub Sun }) = 8.9 and asymptotes to 12 + log(O/H) = 8.8 at high mass. The direct method mass-metallicity relation has a steeper slope, a lower turnover mass, and a factor of two to three greater dependence on SFR than strong line mass-metallicity relations. Furthermore, the SFR-dependence appears monotonic with stellar mass, unlike strong line mass-metallicity relations. We also measure the N/O abundance ratio, an important tracer of star formation history, and find the clear signature of primary and secondary nitrogen enrichment. N/O correlates tightly with oxygen abundance, and even more so with stellar mass.

A Fast Soft Bit Error Rate Estimation Method

Directory of Open Access Journals (Sweden)

Ait-Idir Tarik

2010-01-01

Full Text Available We have suggested in a previous publication a method to estimate the Bit Error Rate (BER of a digital communications system instead of using the famous Monte Carlo (MC simulation. This method was based on the estimation of the probability density function (pdf of soft observed samples. The kernel method was used for the pdf estimation. In this paper, we suggest to use a Gaussian Mixture (GM model. The Expectation Maximisation algorithm is used to estimate the parameters of this mixture. The optimal number of Gaussians is computed by using Mutual Information Theory. The analytical expression of the BER is therefore simply given by using the different estimated parameters of the Gaussian Mixture. Simulation results are presented to compare the three mentioned methods: Monte Carlo, Kernel and Gaussian Mixture. We analyze the performance of the proposed BER estimator in the framework of a multiuser code division multiple access system and show that attractive performance is achieved compared with conventional MC or Kernel aided techniques. The results show that the GM method can drastically reduce the needed number of samples to estimate the BER in order to reduce the required simulation run-time, even at very low BER.

Development of a Self-Rated Mixed Methods Skills Assessment: The NIH Mixed Methods Research Training Program for the Health Sciences

Science.gov (United States)

Guetterman, Timothy C.; Creswell, John W.; Wittink, Marsha; Barg, Fran K.; Castro, Felipe G.; Dahlberg, Britt; Watkins, Daphne C.; Deutsch, Charles; Gallo, Joseph J.

2017-01-01

Introduction Demand for training in mixed methods is high, with little research on faculty development or assessment in mixed methods. We describe the development of a Self-Rated Mixed Methods Skills Assessment and provide validity evidence. The instrument taps six research domains: “Research question,” “Design/approach,” “Sampling,” “Data collection,” “Analysis,” and “Dissemination.” Respondents are asked to rate their ability to define or explain concepts of mixed methods under each domain, their ability to apply the concepts to problems, and the extent to which they need to improve. Methods We administered the questionnaire to 145 faculty and students using an internet survey. We analyzed descriptive statistics and performance characteristics of the questionnaire using Cronbach’s alpha to assess reliability and an ANOVA that compared a mixed methods experience index with assessment scores to assess criterion-relatedness. Results Internal consistency reliability was high for the total set of items (.95) and adequate (>=.71) for all but one subscale. Consistent with establishing criterion validity, respondents who had more professional experiences with mixed methods (e.g., published a mixed methods paper) rated themselves as more skilled, which was statistically significant across the research domains. Discussion This Self-Rated Mixed Methods Assessment instrument may be a useful tool to assess skills in mixed methods for training programs. It can be applied widely at the graduate and faculty level. For the learner, assessment may lead to enhanced motivation to learn and training focused on self-identified needs. For faculty, the assessment may improve curriculum and course content planning. PMID:28562495

Measuring Protein Synthesis Rate In Living Object Using Flooding Dose And Constant Infusion Methods

OpenAIRE

Ulyarti, Ulyarti

2018-01-01

Constant infusion is a method used for measuring protein synthesis rate in living object which uses low concentration of amino acid tracers. Flooding dose method is another technique used to measure the rate of protein synthesis which uses labelled amino acid together with large amount of unlabelled amino acid.  The latter method was firstly developed to solve the problem in determination of precursor pool arise from constant infusion method.  The objective of this writing is to com...

Dose rate reduction method for NMCA applied BWR plants

International Nuclear Information System (INIS)

Nagase, Makoto; Aizawa, Motohiro; Ito, Tsuyoshi; Hosokawa, Hideyuki; Varela, Juan; Caine, Thomas

2012-09-01

BRAC (BWR Radiation Assessment and Control) dose rate is used as an indicator of the incorporation of activated corrosion by products into BWR recirculation piping, which is known to be a significant contributor to dose rate received by workers during refueling outages. In order to reduce radiation exposure of the workers during the outage, it is desirable to keep BRAC dose rates as low as possible. After HWC was adopted to reduce IGSCC, a BRAC dose rate increase was observed in many plants. As a countermeasure to these rapid dose rate increases under HWC conditions, Zn injection was widely adopted in United States and Europe resulting in a reduction of BRAC dose rates. However, BRAC dose rates in several plants remain high, prompting the industry to continue to investigate methods to achieve further reductions. In recent years a large portion of the BWR fleet has adopted NMCA (NobleChem TM ) to enhance the hydrogen injection effect to suppress SCC. After NMCA, especially OLNC (On-Line NobleChem TM ), BRAC dose rates were observed to decrease. In some OLNC applied BWR plants this reduction was observed year after year to reach a new reduced equilibrium level. This dose rate reduction trends suggest the potential dose reduction might be obtained by the combination of Pt and Zn injection. So, laboratory experiments and in-plant tests were carried out to evaluate the effect of Pt and Zn on Co-60 deposition behaviour. Firstly, laboratory experiments were conducted to study the effect of noble metal deposition on Co deposition on stainless steel surfaces. Polished type 316 stainless steel coupons were prepared and some of them were OLNC treated in the test loop before the Co deposition test. Water chemistry conditions to simulate HWC were as follows: Dissolved oxygen, hydrogen and hydrogen peroxide were below 5 ppb, 100 ppb and 0 ppb (no addition), respectively. Zn was injected to target a concentration of 5 ppb. The test was conducted up to 1500 hours at 553 K. Test

76 FR 38281 - Federal Employees Health Benefits Program: New Premium Rating Method for Most Community Rated...

Science.gov (United States)

2011-06-29

... CFR Parts 1602, 1615, et al. Federal Employees Health Benefits Program: New Premium Rating Method for... Part 890; 48 CFR Parts 1602, 1615, 1632, and 1652 RIN 3206-AM39 Federal Employees Health Benefits..., 2011 (76 FR 36857). The document amends the Federal Employees Health Benefits (FEHB) regulations at 5...

An adaptation method to improve secret key rates of time-frequency QKD in atmospheric turbulence channels

Science.gov (United States)

Sun, Xiaole; Djordjevic, Ivan B.; Neifeld, Mark A.

2016-03-01

Free-space optical (FSO) channels can be characterized by random power fluctuations due to atmospheric turbulence, which is known as scintillation. Weak coherent source based FSO quantum key distribution (QKD) systems suffer from the scintillation effect because during the deep channel fading the expected detection rate drops, which then gives an eavesdropper opportunity to get additional information about protocol by performing photon number splitting (PNS) attack and blocking single-photon pulses without changing QBER. To overcome this problem, in this paper, we study a large-alphabet QKD protocol, which is achieved by using pulse-position modulation (PPM)-like approach that utilizes the time-frequency uncertainty relation of the weak coherent photon state, called here TF-PPM-QKD protocol. We first complete finite size analysis for TF-PPM-QKD protocol to give practical bounds against non-negligible statistical fluctuation due to finite resources in practical implementations. The impact of scintillation under strong atmospheric turbulence regime is studied then. To overcome the secure key rate performance degradation of TF-PPM-QKD caused by scintillation, we propose an adaptation method for compensating the scintillation impact. By changing source intensity according to the channel state information (CSI), obtained by classical channel, the adaptation method improves the performance of QKD system with respect to the secret key rate. The CSI of a time-varying channel can be predicted using stochastic models, such as autoregressive (AR) models. Based on the channel state predictions, we change the source intensity to the optimal value to achieve a higher secret key rate. We demonstrate that the improvement of the adaptation method is dependent on the prediction accuracy.

Corrosion potential detection method, potential characteristic simulation method for reaction rate and plant monitoring system using the same

International Nuclear Information System (INIS)

Sakai, Masanori; Onaka, Noriyuki; Takahashi, Tatsuya; Yamanaka, Hiroshi.

1995-01-01

In a calculation controlling device for a plant monitoring system, concentrations of materials concerning reaction materials in a certain state of a reaction process, and an actually measured value for the potential of a material in this state are substituted into a reaction rate equation obtained in accordance with a reaction process model. With such procedures, a relation between the reaction rate (current value) and the potential of the material can be obtained. A potential at which the reaction rates of an anode reaction and a cathode reaction contained in a corrosion reaction are made equal is determined by a numerical value calculation, based on an electrochemical hybrid potential logic by using the reaction rate equation, the reaction rate information relative to the corrosion reaction of the material and the concentration of the material concerning the corrosion reaction is obtained by a numerical value calculation. Then, simulation for the corrosion potential is enabled based on the handling corresponding to the actual reaction. Further, even for a portion which can not be measured actually, the corrosion potential can be recognized by simulation. (N.H.)

Combining Review Text Content and Reviewer-Item Rating Matrix to Predict Review Rating

Directory of Open Access Journals (Sweden)

Bingkun Wang

2016-01-01

Full Text Available E-commerce develops rapidly. Learning and taking good advantage of the myriad reviews from online customers has become crucial to the success in this game, which calls for increasingly more accuracy in sentiment classification of these reviews. Therefore the finer-grained review rating prediction is preferred over the rough binary sentiment classification. There are mainly two types of method in current review rating prediction. One includes methods based on review text content which focus almost exclusively on textual content and seldom relate to those reviewers and items remarked in other relevant reviews. The other one contains methods based on collaborative filtering which extract information from previous records in the reviewer-item rating matrix, however, ignoring review textual content. Here we proposed a framework for review rating prediction which shows the effective combination of the two. Then we further proposed three specific methods under this framework. Experiments on two movie review datasets demonstrate that our review rating prediction framework has better performance than those previous methods.

State-related differences in heart rate variability in bipolar disorder

DEFF Research Database (Denmark)

Faurholt-Jepsen, Maria; Brage, Søren; Kessing, Lars Vedel

2017-01-01

Heart rate variability (HRV) is a validated measure of sympato-vagal balance in the autonomic nervous system. HRV appears decreased in patients with bipolar disorder (BD) compared with healthy individuals, but the extent of state-related alterations has been sparingly investigated. The present...... bipolar disorder and could...

Neutron Scattering in Hydrogenous Moderators, Studied by Time Dependent Reaction Rate Method

Energy Technology Data Exchange (ETDEWEB)

Larsson, L G; Moeller, E; Purohit, S N

1966-03-15

The moderation and absorption of a neutron burst in water, poisoned with the non-1/v absorbers cadmium and gadolinium, has been followed on the time scale by multigroup calculations, using scattering kernels for the proton gas and the Nelkin model. The time dependent reaction rate curves for each absorber display clear differences for the two models, and the separation between the curves does not depend much on the absorber concentration. An experimental method for the measurement of infinite medium reaction rate curves in a limited geometry has been investigated. This method makes the measurement of the time dependent reaction rate generally useful for thermalization studies in a small geometry of a liquid hydrogenous moderator, provided that the experiment is coupled to programs for the calculation of scattering kernels and time dependent neutron spectra. Good agreement has been found between the reaction rate curve, measured with cadmium in water, and a calculated curve, where the Haywood kernel has been used.

Surface applicators for high dose rate brachytherapy in AIDS-related kaposi's sarcoma

International Nuclear Information System (INIS)

Evans, Michael D.C.; Yassa, Mariam; Podgorsak, Ervin B.; Roman, Ted N.; Schreiner, L. John; Souhami, Luis

1997-01-01

Purpose: The development of commercially available surface applicators using high dose rate remote afterloading devices has enabled radiotherapy centers to treat selected superficial lesions using a remote afterloading brachytherapy unit. The dosimetric parameters of these applicators, the clinical implementation of this technique, and a review of the initial patient treatment regimes are presented. Methods and Materials: A set of six fixed-diameter (1, 2, and 3 cm), tungsten/steel surface applicators is available for use with a single stepping-source (Ir-192, 370 GBq) high dose rate afterloader. The source can be positioned either in a parallel or perpendicular orientation to the treatment plane at the center of a conical aperture that sits at an SSD of approximately 15 mm and is used with a 1-mm thick removable plastic cap. The surface dose rates, percent depth dose, and off-axis ratios were measured. A custom-built, ceiling-mounted immobilization device secures the applicator on the surface of the patient's lesion during treatment. Results: Between November 1994, and September 1996, 16 AIDS-related Kaposi's sarcoma patients having a total of 120 lesions have been treated with palliative intent. Treatment sites were distributed between the head and neck, extremity, and torso. Doses ranged from 8 to 20 Gy, with a median dose of 10 Gy delivered in a single fraction. Treatments were well tolerated with minimal skin reaction, except for patients with lesions treated to 20 Gy who developed moderate/severe desquamation. Conclusion: Radiotherapy centers equipped with a high dose rate remote afterloading unit may treat small selected surface lesions with commercially available surface applicators. These surface applicators must be used with a protective cap to eliminate electron contamination. The optimal surface dose appears to be either 10 or 15 Gy depending upon the height of the lesion

Intra-uterine insemination: pregnancy rate in relation to number, size of pre-ovulatory follicles and day of insemination.

Science.gov (United States)

Karuppaswamy, J; Smedley, Mamin; Carter, Lindsay

2009-03-01

The objective of the study was to analyse the pregnancy rate in intra-uterine insemination (IUI) in relation to pre-ovulatory follicular number, size and day of insemination. A retrospective analysis of 216 completed IUI cycles was used in an attempt to identify significant variables predictive of treatment success. Couples with unexplained infertility and male factor infertility underwent IUI with or without ovarian stimulation. The mean number of IUI cycles per patient was 4.1, the overall pregnancy rate was 27.3% per patient, and the pregnancy rate per cycle was 6.9%. The pregnancy rate was 4.4% when one follicle was produced, whereas with more than two follicles, the rate increased to 21.2%. Hormonal stimulation using clomiphene citrate and/or human menopausal gonadotrophin/follicle stimulating hormone yielded a significant higher pregnancy rate compared to IUI in natural cycles (10.3% versus 3.3%). Although not statistically significant, the pregnancy rate decreased with advancing age of woman. The results suggest that IUI is a useful method of assisted conception in unexplained infertility and higher pregnancy rates can be achieved with good patient selection and ovarian stimulation.

Stability-indicating UPLC method for determining related substances and degradants in dronedarone.

Science.gov (United States)

Pydimarry, Surya Prakash Rao; Cholleti, Vijay Kumar; Vangala, Ranga Reddy

2014-08-01

A simple, sensitive and reproducible method was developed on ultra-performance liquid chromatography coupled with photodiode array detection for the quantitative determination of dronedarone hydrochloride (DRO) in drug substance and pharmaceutical dosage forms. The method is applicable for the quantification of related substances and assays of drug substances. Chromatographic separation was achieved on Acquity UPLC BEH C8 100 mm, 2.1 mm and 1.7 µm columns, using gradient elution within a short run time of 10.0 min. The eluted compounds were monitored at 288 nm, the flow rate was 0.5 mL/min and the column oven temperature was maintained at 40°C. The resolution of DRO and 11 impurities (potentials and by-products) was greater than 2.0 for all pairs of components. The high correlation coefficient value (>0.9995) indicates the clear correlations between the concentrations of investigated compound and their peak areas within the test ranges. The repeatability and intermediate precision, expressed by the relative standard deviation, were less than 2.5%. The accuracy and validity of the method were further ascertained by performing recovery studies via a spike method. The accuracy of the method, expressed as relative error, was satisfactory. No interference was observed from concomitant substances normally added to the tablets. DRO was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. DRO was found to degrade significantly in acid and base stress conditions and to remain stable in thermal, photolytic degradation, oxidative and hydrolytic conditions. The degradation products were well resolved from primary peak and its impurities, proving that the method is stability indicating. The developed method was validated as per International Conference on Harmonization guidelines with respect to specificity, limit of detection, limit of quantification, linearity, accuracy, precision, solution stability and robustness

Hydration rate of obsidian.

Science.gov (United States)

Friedman, I; Long, W

1976-01-30

The hydration rates of 12 obsidian samples of different chemical compositions were measured at temperatures from 95 degrees to 245 degrees C. An expression relating hydration rate to temperature was derived for each sample. The SiO(2) content and refractive index are related to the hydration rate, as are the CaO, MgO, and original water contents. With this information it is possible to calculate the hydration rate of a sample from its silica content, refractive index, or chemical index and a knowledge of the effective temperature at which the hydration occurred. The effective hydration temperature can be either measured or approximated from weather records. Rates have been calculated by both methods, and the results show that weather records can give a good approximation to the true EHT, particularly in tropical and subtropical climates. If one determines the EHT by any of the methods suggested, and also measures or knows the rate of hydration of the particular obsidian used, it should be possible to carry out absolute dating to +/- 10 percent of the true age over periods as short as several years and as long as millions of years.

Tensile strength of concrete under static and intermediate strain rates: Correlated results from different testing methods

International Nuclear Information System (INIS)

Wu Shengxing; Chen Xudong; Zhou Jikai

2012-01-01

Highlights: ► Tensile strength of concrete increases with increase in strain rate. ► Strain rate sensitivity of tensile strength of concrete depends on test method. ► High stressed volume method can correlate results from various test methods. - Abstract: This paper presents a comparative experiment and analysis of three different methods (direct tension, splitting tension and four-point loading flexural tests) for determination of the tensile strength of concrete under low and intermediate strain rates. In addition, the objective of this investigation is to analyze the suitability of the high stressed volume approach and Weibull effective volume method to the correlation of the results of different tensile tests of concrete. The test results show that the strain rate sensitivity of tensile strength depends on the type of test, splitting tensile strength of concrete is more sensitive to an increase in the strain rate than flexural and direct tensile strength. The high stressed volume method could be used to obtain a tensile strength value of concrete, free from the influence of the characteristics of tests and specimens. However, the Weibull effective volume method is an inadequate method for describing failure of concrete specimens determined by different testing methods.

Excessive leakage measurement using pressure decay method in containment building local leakage rate test at nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Kyu; Kim, Chang Soo; Kim, Wang Bae [KHNP, Central Research Institute, Daejeon (Korea, Republic of)

2016-06-15

There are two methods for conducting the containment local leakage rate test (LLRT) in nuclear power plants: the make-up flow rate method and the pressure decay method. The make-up flow rate method is applied first in most power plants. In this method, the leakage rate is measured by checking the flow rate of the make-up flow. However, when it is difficult to maintain the test pressure because of excessive leakage, the pressure decay method can be used as a complementary method, as the leakage rates at pressures lower than normal can be measured using this method. We studied the method of measuring over leakage using the pressure decay method for conducting the LLRT for the containment building at a nuclear power plant. We performed experiments under conditions similar to those during an LLRT conducted on-site. We measured the characteristics of the leakage rate under varies pressure decay conditions, and calculated the compensation ratio based on these data.

Significance of experts' overall ratings for medical student competence in relation to history-taking

Directory of Open Access Journals (Sweden)

Luiz Ernesto de Almeida Troncon

Full Text Available CONTEXT AND OBJECTIVE: Overall ratings (ORs of competence, given by expert physicians, are increasingly used in clinical skills assessments. Nevertheless, the influence of specific components of competence on ORs is incompletely understood. The aim here was to investigate whether ORs for medical student history-taking competence are influenced by performance relating to communication skills, completeness of questioning and asking contentdriven key questions. DESIGN AND SETTING: Descriptive, quantitative study at Faculdade de Medicina de Ribeirão Preto, Universidade de São Paulo. METHODS: Thirty-six medical students were examined in a 15-station high-stake objective structured clinical examination (OSCE. At four stations devoted to history-taking, examiners filled out checklists covering the components investigated and independently rated students’ overall performance using a five-point scale from 1 (poor to 5 (excellent. Physician ratings were aggregated for each student. Nonparametric correlations were made between ORs. RESULTS: ORs presented significant correlations with checklist scores (Spearman’s rs = 0.38; p = 0.02 and OSCE general results (rs = 0.52; p < 0.001. Scores for "communication skills" tended to correlate with ORs (rs = 0.31, but without reaching significance (p = 0.06. Neither the scores for "completeness" (rs = 0.26; p = 0.11 nor those for "asking key questions" (rs = 0.07; p = 0.60 correlated with ORs. CONCLUSIONS: Experts’ overall ratings for medical student competence regarding history-taking is likely to encompass a particular dimension, since ratings were only weakly influenced by specific components of performance.

Comparison between calculation methods of dose rates in gynecologic brachytherapy

International Nuclear Information System (INIS)

Vianello, E.A.; Biaggio, M.F.; D R, M.F.; Almeida, C.E. de

1998-01-01

In treatments with radiations for gynecologic tumors is necessary to evaluate the quality of the results obtained by different calculation methods for the dose rates on the points of clinical interest (A, rectal, vesicle). The present work compares the results obtained by two methods. The Manual Calibration Method (MCM) tri dimensional (Vianello E., et.al. 1998), using orthogonal radiographs for each patient in treatment, and the Theraplan/T P-11 planning system (Thratonics International Limited 1990) this last one verified experimentally (Vianello et.al. 1996). The results show that MCM can be used in the physical-clinical practice with a percentile difference comparable at the computerized programs. (Author)

77 FR 31756 - Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating...

Science.gov (United States)

2012-05-30

...-AC46 Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating... regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption... alternative methods of determining energy efficiency or energy consumption of various consumer products and...

Standard practice for calculation of corrosion rates and related information from electrochemical measurements

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers the providing of guidance in converting the results of electrochemical measurements to rates of uniform corrosion. Calculation methods for converting corrosion current density values to either mass loss rates or average penetration rates are given for most engineering alloys. In addition, some guidelines for converting polarization resistance values to corrosion rates are provided. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

CoRE: A context-aware relation extraction method for relation completion

KAUST Repository

Li, Zhixu; Sharaf, Mohamed Abdel Fattah; Sitbon, Laurianne; Du, Xiaoyong; Zhou, Xiaofang

2014-01-01

We identify relation completion (RC) as one recurring problem that is central to the success of novel big data applications such as Entity Reconstruction and Data Enrichment. Given a semantic relation {\\cal R}, RC attempts at linking entity pairs between two entity lists under the relation {\\cal R}. To accomplish the RC goals, we propose to formulate search queries for each query entity \\alpha based on some auxiliary information, so that to detect its target entity \\beta from the set of retrieved documents. For instance, a pattern-based method (PaRE) uses extracted patterns as the auxiliary information in formulating search queries. However, high-quality patterns may decrease the probability of finding suitable target entities. As an alternative, we propose CoRE method that uses context terms learned surrounding the expression of a relation as the auxiliary information in formulating queries. The experimental results based on several real-world web data collections demonstrate that CoRE reaches a much higher accuracy than PaRE for the purpose of RC. © 1989-2012 IEEE.

CoRE: A context-aware relation extraction method for relation completion

KAUST Repository

Li, Zhixu

2014-04-01

We identify relation completion (RC) as one recurring problem that is central to the success of novel big data applications such as Entity Reconstruction and Data Enrichment. Given a semantic relation {\\\\cal R}, RC attempts at linking entity pairs between two entity lists under the relation {\\\\cal R}. To accomplish the RC goals, we propose to formulate search queries for each query entity \\\\alpha based on some auxiliary information, so that to detect its target entity \\\\beta from the set of retrieved documents. For instance, a pattern-based method (PaRE) uses extracted patterns as the auxiliary information in formulating search queries. However, high-quality patterns may decrease the probability of finding suitable target entities. As an alternative, we propose CoRE method that uses context terms learned surrounding the expression of a relation as the auxiliary information in formulating queries. The experimental results based on several real-world web data collections demonstrate that CoRE reaches a much higher accuracy than PaRE for the purpose of RC. © 1989-2012 IEEE.

Generalized Bregman distances and convergence rates for non-convex regularization methods

International Nuclear Information System (INIS)

Grasmair, Markus

2010-01-01

We generalize the notion of Bregman distance using concepts from abstract convexity in order to derive convergence rates for Tikhonov regularization with non-convex regularization terms. In particular, we study the non-convex regularization of linear operator equations on Hilbert spaces, showing that the conditions required for the application of the convergence rates results are strongly related to the standard range conditions from the convex case. Moreover, we consider the setting of sparse regularization, where we show that a rate of order δ 1/p holds, if the regularization term has a slightly faster growth at zero than |t| p

Seeding method and rate influence on weed suppression in aerobic ...

African Journals Online (AJOL)

High weed pressure is amongst the major constraints to the extensive adoption of aerobic rice system as a water-wise technique. Towards developing a sustainable weed management strategy, seeding method and rate may substantially contribute to weed suppression and reduce herbicide use and weeding cost. A trough ...

THE EFFECT OF EXCHANGE RATE ON THE CONSTRUCTION PROJECTS AND PROTECTION METHODS

Directory of Open Access Journals (Sweden)

Handan AKSUYEK,

2017-02-01

Full Text Available As with all sectors, recent extreme changes occurred in the exchange rates have substantially affected the construction operations. While the rise in foreign exchange rates leads to harmful effects in the negative direction at the operations having foreign exchange – based debt or it provides also advantageous effect in the positive direction at the construction companies having foreign exchange – indexed investments. In this context, this sudden change in foreign exchange rates which cannot be predicted beforehand and emerges as a result of speculative events. As with all operations carrying out foreign exchange – based tasks, these fluctuations in the foreign exchange rate head first among the factors which affect the achievement or failure of the cost or profit targets previously determined by the construction companies as well. Therefore, the companies whose costs and profits consist of different units of currency in their construction agreements should apply to the hedging methods in order to be protected against the exchange rate. As for the main tools of protection method are the derivative products such as forward, futures, swap and optional contracts. In this study, the effect of exchange rate fluctuations on the completion costs of construction projects is scrutinized. Moreover, the tools which may be employed by the construction companies in order to get rid of exchange rate which adversely influence the building companies in both directions have been comparatively evaluated.

Engineering aspects of rate-related processes in food manufacturing.

Science.gov (United States)

Adachi, Shuji

2015-01-01

Many rate-related phenomena occur in food manufacturing processes. This review addresses four of them, all of which are topics that the author has studied in order to design food manufacturing processes that are favorable from the standpoint of food engineering. They include chromatographic separation through continuous separation with a simulated moving adsorber, lipid oxidation kinetics in emulsions and microencapsulated systems, kinetic analysis and extraction in subcritical water, and water migration in pasta.

Real-time Continuous Assessment Method for Mental and Physiological Condition using Heart Rate Variability

Science.gov (United States)

Yoshida, Yutaka; Yokoyama, Kiyoko; Ishii, Naohiro

It is necessary to monitor the daily health condition for preventing stress syndrome. In this study, it was proposed the method assessing the mental and physiological condition, such as the work stress or the relaxation, using heart rate variability at real time and continuously. The instantanuous heart rate (HR), and the ratio of the number of extreme points (NEP) and the number of heart beats were calculated for assessing mental and physiological condition. In this method, 20 beats heart rate were used to calculate these indexes. These were calculated in one beat interval. Three conditions, which are sitting rest, performing mental arithmetic and watching relaxation movie, were assessed using our proposed algorithm. The assessment accuracies were 71.9% and 55.8%, when performing mental arithmetic and watching relaxation movie respectively. In this method, the mental and physiological condition was assessed using only 20 regressive heart beats, so this method is considered as the real time assessment method.

Sequential multi-nuclide emission rate estimation method based on gamma dose rate measurement for nuclear emergency management

International Nuclear Information System (INIS)

Zhang, Xiaole; Raskob, Wolfgang; Landman, Claudia; Trybushnyi, Dmytro; Li, Yu

2017-01-01

Highlights: • Sequentially reconstruct multi-nuclide emission using gamma dose rate measurements. • Incorporate a priori ratio of nuclides into the background error covariance matrix. • Sequentially augment and update the estimation and the background error covariance. • Suppress the generation of negative estimations for the sequential method. • Evaluate the new method with twin experiments based on the JRODOS system. - Abstract: In case of a nuclear accident, the source term is typically not known but extremely important for the assessment of the consequences to the affected population. Therefore the assessment of the potential source term is of uppermost importance for emergency response. A fully sequential method, derived from a regularized weighted least square problem, is proposed to reconstruct the emission and composition of a multiple-nuclide release using gamma dose rate measurement. The a priori nuclide ratios are incorporated into the background error covariance (BEC) matrix, which is dynamically augmented and sequentially updated. The negative estimations in the mathematical algorithm are suppressed by utilizing artificial zero-observations (with large uncertainties) to simultaneously update the state vector and BEC. The method is evaluated by twin experiments based on the JRodos system. The results indicate that the new method successfully reconstructs the emission and its uncertainties. Accurate a priori ratio accelerates the analysis process, which obtains satisfactory results with only limited number of measurements, otherwise it needs more measurements to generate reasonable estimations. The suppression of negative estimation effectively improves the performance, especially for the situation with poor a priori information, where it is more prone to the generation of negative values.

Sequential multi-nuclide emission rate estimation method based on gamma dose rate measurement for nuclear emergency management

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xiaole, E-mail: zhangxiaole10@outlook.com [Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology, Karlsruhe, D-76021 (Germany); Institute of Public Safety Research, Department of Engineering Physics, Tsinghua University, Beijing, 100084 (China); Raskob, Wolfgang; Landman, Claudia; Trybushnyi, Dmytro; Li, Yu [Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology, Karlsruhe, D-76021 (Germany)

2017-03-05

Highlights: • Sequentially reconstruct multi-nuclide emission using gamma dose rate measurements. • Incorporate a priori ratio of nuclides into the background error covariance matrix. • Sequentially augment and update the estimation and the background error covariance. • Suppress the generation of negative estimations for the sequential method. • Evaluate the new method with twin experiments based on the JRODOS system. - Abstract: In case of a nuclear accident, the source term is typically not known but extremely important for the assessment of the consequences to the affected population. Therefore the assessment of the potential source term is of uppermost importance for emergency response. A fully sequential method, derived from a regularized weighted least square problem, is proposed to reconstruct the emission and composition of a multiple-nuclide release using gamma dose rate measurement. The a priori nuclide ratios are incorporated into the background error covariance (BEC) matrix, which is dynamically augmented and sequentially updated. The negative estimations in the mathematical algorithm are suppressed by utilizing artificial zero-observations (with large uncertainties) to simultaneously update the state vector and BEC. The method is evaluated by twin experiments based on the JRodos system. The results indicate that the new method successfully reconstructs the emission and its uncertainties. Accurate a priori ratio accelerates the analysis process, which obtains satisfactory results with only limited number of measurements, otherwise it needs more measurements to generate reasonable estimations. The suppression of negative estimation effectively improves the performance, especially for the situation with poor a priori information, where it is more prone to the generation of negative values.

Development in self-rated health among older people as determinant of social relations

DEFF Research Database (Denmark)

Avlund, Kirsten; Modvig, Jens Simon; Due, Pernille

2004-01-01

The purpose of this study was to analyse whether development in self-rated health (SRH) over four years was associated with the structure of and satisfaction with social relations, at four and eight years follow-up, among elderly women and men.......The purpose of this study was to analyse whether development in self-rated health (SRH) over four years was associated with the structure of and satisfaction with social relations, at four and eight years follow-up, among elderly women and men....

Temporal discounting rates and their relation to exercise behavior in older adults.

Science.gov (United States)

Tate, Linda M; Tsai, Pao-Feng; Landes, Reid D; Rettiganti, Mallikarjuna; Lefler, Leanne L

2015-12-01

As our nation's population ages, the rates of chronic illness and disability are expected to increase significantly. Despite the knowledge that exercise may prevent chronic disease and promote health among older adults, many still are inactive. Factors related to exercise behaviors have been explored in recent years. However, temporal discounting is a motivational concept that has not been explored in regard to exercise in older adults. Temporal discounting is a decision making process by which an individual chooses a smaller more immediate reward over a larger delayed reward. The aim of this study was to determine if temporal discounting rates vary between exercising and non-exercising older adults. This study used cross-sectional survey of 137 older adults living in the community. Older adults were recruited from 11 rural Arkansas churches. The Kirby delay-discounting Monetary Choice Questionnaire was used to collect discounting rates and then bivariate analysis was performed to compare temporal discounting rate between the exercisers and non-exercisers. Finally, multivariate analysis was used to compare discounting rate controlling for other covariates. The results indicated that exercising older adults display lower temporal discounting rates than non-exercising older adults. After controlling for education, exercisers still have lower temporal discounting rates than non-exercisers (phealth conditions relate to lack of exercise especially in older adults. This research suggests that if we can find appropriate incentives for discounting individuals, some type of immediate reward, then potentially we can design programs to engage and retain older adults in exercise. Copyright © 2015 Elsevier Inc. All rights reserved.

The relation of Complementary-Alternative Medicine use with glomerular filtration rate and depression in patients with chronic kidney disease at predialysis stage.

Science.gov (United States)

Esen, Bennur; Atay, Ahmet Engin; Gokmen, Emel Saglam; Karakoc, Ayten; Sari, Hakan; Sarisakal, Samprie; Kahvecioglu, Serdar; Kayabasi, Hasan; Sit, Dede

2015-05-08

Complementary and alternative medicine is a broad field of health including all health care practices and methods; and their accompanying theories and beliefs. In the present study, we aimed to examine the frequency of complementary-alternative medicine use, and its relation with glomerular filtration rate and depression in patients with chronic kidney disease at predialysis stage. A total of 1053 predialysis patients; 518 female and 535 male, that were followed up with chronic kidney disease for at least 3 months were enrolled into the study. Demographic features, biochemical parameters and findings of physical examination were recorded. Their compliance to diet, and knowledge about disease were questioned. Beck depression inventory and questionnaire regarding to complementary-alternative medicine use were performed. The overall frequency of complementary-alternative medicine use was 40.3% . Total ratio of herbal products was 46%. Complementary-alternative medicine use was significantly more frequent in female or single patients, and patients that informed about chronic kidney disease or under strict diet (p:0.007, p:0.016, p:0.02, p:0.016; respectively). When glomerular filtration rate of participants were considered, complementary-alternative medicine use was similar in different stages of kidney disease. Depression was observed in 41.9% of patients and significantly frequent in patients with alternative method use (p:0.002). Depression score was higher as creatinine increases and glomerular filtration rate decreases (p:0.002; r: 0,093). We determined that complementary-alternative medicine use gradually increases at predialysis stage as glomerular filtration rate decreases and there is a strict relation between complementary-alternative medicine use and depression or female gender. Disorder related stressors may lead to seeking of alternative methods. This article is protected by copyright. All rights reserved.

The close relation between birth, abortion and employment rates in Sweden from 1980 to 2004.

Science.gov (United States)

Rahmqvist, Mikael

2006-09-01

Birth and abortion rates in Sweden have fluctuated since 1980 while the proportion between the rates are the same at the beginning and end of the period. An increase in birth rates in the late 1980s resulted in a peak in 1991 and 1992, with 124,000 live births each year. Thereafter followed a steady decline in the rate until 2000, when the number of live births was about 90,000. At that point, the trend changed to an increase. The aim of this analysis was to investigate any relation between employment rates and the number of live births among women aged 20-34, and at the same time to explore the trend for abortion rates compared to the trend for live births. The relation between employment status and live birth rate is statistically more significant for women than men, and the rates have a higher correlation for the period after 1986. Young adults in this age group are vulnerable to economic cycles that can explain this covariation but the decline in birth rates in economically developed societies has multidimensional aspects and many other possible explanations. Much has been done in recent years in Sweden to decrease household inequality for families with children to avoid the risk of relative poverty, but the fact that there is no explicit health policy to reduce the abortion level that remain unchanged since the early 1980s may appear as a notable lack of strategy in a country with many other health-related goals.

Effect of different rates and methods of benomyl and mancozeb ...

African Journals Online (AJOL)

AJB SERVER

2006-07-22

Jul 22, 2006 ... Field assessment of different rates and methods of three fungicide applications on delay in senescence. (DS) and grain ... Out of 170 species in the genus, V. unguiculata is ... The experiment was conducted at the teaching and research farm of Faculty of Agricultural Sciences, Ladoke Akintola University of.

What does self rated mental health represent

Directory of Open Access Journals (Sweden)

Daphna Levinson

2014-12-01

Full Text Available Background. Unlike the widely used self rated health, the self rated mental health was found unsuitable as a proxy for mental illness. This paper analyses the relationships between the self ratings of physical health, mental health and overall health, and their association of with the objective indicators for physical and mental health. Design and methods. The study is a secondary analysis of data from a nationwide representative sample of the non-institutionalized adult residents of Israel in 2003 that was collected via computer-assisted personal interview methods [n=4859].Results. The self rated physical health and the self rated mental health were strongly related to each other yet the self rated mental health was not related to chronic physical conditions and the self rated physical health was not related to mental disorders. In a multiple logistic regression analysis, those with positive self rated mental health had 93 times the odds of reporting positive overall health whereas those with positive self rated physical health had 40 times the odds of reporting positive overall health. Conclusions. The self rating of mental health presents a qualitatively different dimension from mental illness. The self rated mental health is two times more important than the self rated physical health in predicting the self rated overall health

Concurrent Driving Method with Fast Scan Rate for Large Mutual Capacitance Touch Screens

Directory of Open Access Journals (Sweden)

Mohamed Gamal Ahmed Mohamed

2015-01-01

Full Text Available A novel touch screen control technique is introduced, which scans each frame in two steps of concurrent multichannel driving and differential sensing. The proposed technique substantially increases the scan rate and reduces the ambient noise effectively. It is also extended to a multichip architecture to support excessively large touch screens with great scan rate improvement. The proposed method has been implemented using 0.18 μm CMOS TowerJazz process and tested with FPGA and AFE board connecting a 23-inch touch screen. Experimental results show a scan rate improvement of up to 23.8 times and an SNR improvement of 24.6 dB over the conventional method.

Temperature- and body mass-related variation in cyclic gas exchange characteristics and metabolic rate of seven weevil species: Broader implications.

Science.gov (United States)

Klok, C J; Chown, S L

2005-07-01

The influence of temperature on metabolic rate and characteristics of the gas exchange patterns of flightless, sub-Antarctic Ectemnorhinus-group species from Heard and Marion islands was investigated. All of the species showed cyclic gas exchange with no Flutter period, indicating that these species are not characterized by discontinuous gas exchange cycles. Metabolic rate estimates were substantially lower in this study than in a previous one of a subset of the species, demonstrating that open-system respirometry methods provide more representative estimates of standard metabolic rate than do many closed-system methods. We recommend that the latter, and especially constant-pressure methods, either be abandoned for estimates of standard metabolic rate in insects, or have their outputs subject to careful scrutiny, given the wide availability of the former. V(.)CO(2) increase with an increase in temperature (range: 0-15 degrees C) was modulated by an increase in cycle frequency, but typically not by an increase in burst volume. Previous investigations of temperature-related changes in cyclic gas exchange (both cyclic and discontinuous) in several other insect species were therefore substantiated. Interspecific mass-scaling of metabolic rate (ca. 0.466-0.573, excluding and including phylogenetic non-independence, respectively) produced an exponent lower than 0.75 (but not distinguishable from it or from 0.67). The increase of metabolic rate with mass was modulated by an increase in burst volume and not by a change in cycle frequency, in keeping with investigations of species showing discontinuous gas exchange. These findings are discussed in the context of the emerging macrophysiological metabolic theory of ecology.

Optimization of automation: I. Estimation method of cognitive automation rates reflecting the effects of automation on human operators in nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung Min; Kim, Jong Hyun; Seong, Poong Hyun

2014-01-01

Highlights: • We propose an estimation method of the automation rate by taking the advantages of automation as the estimation measures. • We conduct the experiments to examine the validity of the suggested method. • The higher the cognitive automation rate is, the greater the decreased rate of the working time will be. • The usefulness of the suggested estimation method is proved by statistical analyses. - Abstract: Since automation was introduced in various industrial fields, the concept of the automation rate has been used to indicate the inclusion proportion of automation among all work processes or facilities. Expressions of the inclusion proportion of automation are predictable, as is the ability to express the degree of the enhancement of human performance. However, many researchers have found that a high automation rate does not guarantee high performance. Therefore, to reflect the effects of automation on human performance, this paper proposes a new estimation method of the automation rate that considers the effects of automation on human operators in nuclear power plants (NPPs). Automation in NPPs can be divided into two types: system automation and cognitive automation. Some general descriptions and characteristics of each type of automation are provided, and the advantages of automation are investigated. The advantages of each type of automation are used as measures of the estimation method of the automation rate. One advantage was found to be a reduction in the number of tasks, and another was a reduction in human cognitive task loads. The system and the cognitive automation rate were proposed as quantitative measures by taking advantage of the aforementioned benefits. To quantify the required human cognitive task loads and thus suggest the cognitive automation rate, Conant’s information-theory-based model was applied. The validity of the suggested method, especially as regards the cognitive automation rate, was proven by conducting

Development of An Optimization Method for Determining Automation Rate in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Seung Min; Seong, Poong Hyun; Kim, Jong Hyun

2014-01-01

Since automation was introduced in various industrial fields, it has been known that automation provides positive effects like greater efficiency and fewer human errors, and negative effect defined as out-of-the-loop (OOTL). Thus, before introducing automation in nuclear field, the estimation of the positive and negative effects of automation on human operators should be conducted. In this paper, by focusing on CPS, the optimization method to find an appropriate proportion of automation is suggested by integrating the suggested cognitive automation rate and the concepts of the level of ostracism. The cognitive automation rate estimation method was suggested to express the reduced amount of human cognitive loads, and the level of ostracism was suggested to express the difficulty in obtaining information from the automation system and increased uncertainty of human operators' diagnosis. The maximized proportion of automation that maintains the high level of attention for monitoring the situation is derived by an experiment, and the automation rate is estimated by the suggested automation rate estimation method. It is expected to derive an appropriate inclusion proportion of the automation system avoiding the OOTL problem and having maximum efficacy at the same time

Efficacy and Safety of Two Methadone Titration Methods for the Treatment of Cancer-Related Pain: The EQUIMETH2 Trial (Methadone for Cancer-Related Pain).

Science.gov (United States)

Poulain, Philippe; Berleur, Marie-Pierre; Lefki, Shimsi; Lefebvre, Danièle; Chvetzoff, Gisèle; Serra, Eric; Tremellat, Fibra; Derniaux, Alain; Filbet, Marilène

2016-11-01

In the European Association for Palliative Care recommendations for cancer pain management, there was no consensus regarding the indications, titration, or monitoring of methadone. This national, randomized, multicenter trial aimed to compare two methadone titration methods (stop-and-go vs. progressive) in patients with cancer-related pain who were inadequately relieved by or intolerant to Level 3 opioids. The primary end point was the rate of success/failure at Day 4, defined as pain relief (reduction of at least two points on the visual scale and a pain score methods were considered equally easy to perform by nearly 60% of the clinicians. Methadone is an effective and sustainable second-line alternative opioid for the treatment of cancer-related pain. The methods of titration are comparable in terms of efficacy, safety, and ease of use. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Point and interval forecasts of mortality rates and life expectancy: A comparison of ten principal component methods

Directory of Open Access Journals (Sweden)

Han Lin Shang

2011-07-01

Full Text Available Using the age- and sex-specific data of 14 developed countries, we compare the point and interval forecast accuracy and bias of ten principal component methods for forecasting mortality rates and life expectancy. The ten methods are variants and extensions of the Lee-Carter method. Based on one-step forecast errors, the weighted Hyndman-Ullah method provides the most accurate point forecasts of mortality rates and the Lee-Miller method is the least biased. For the accuracy and bias of life expectancy, the weighted Hyndman-Ullah method performs the best for female mortality and the Lee-Miller method for male mortality. While all methods underestimate variability in mortality rates, the more complex Hyndman-Ullah methods are more accurate than the simpler methods. The weighted Hyndman-Ullah method provides the most accurate interval forecasts for mortality rates, while the robust Hyndman-Ullah method provides the best interval forecast accuracy for life expectancy.

Wavelet denoising method; application to the flow rate estimation for water level control

International Nuclear Information System (INIS)

Park, Gee Young; Park, Jin Ho; Lee, Jung Han; Kim, Bong Soo; Seong, Poong Hyun

2003-01-01

The wavelet transform decomposes a signal into time- and frequency-domain signals and it is well known that a noise-corrupted signal could be reconstructed or estimated when a proper denoising method is involved in the wavelet transform. Among the wavelet denoising methods proposed up to now, the wavelets by Mallat and Zhong can reconstruct best the pure transient signal from a highly corrupted signal. But there has been no systematic way of discriminating the original signal from the noise in a dyadic wavelet transform. In this paper, a systematic method is proposed for noise discrimination, which could be implemented easily into a digital system. For demonstrating the potential role of the wavelet denoising method in the nuclear field, this method is applied to the steam or feedwater flow rate estimation of the secondary loop. And the configuration of the S/G water level control system is proposed for incorporating the wavelet denoising method in estimating the flow rate value at low operating powers

Sensitivity of new detection method for ultra-low frequency gravitational waves with pulsar spin-down rate statistics

Science.gov (United States)

Yonemaru, Naoyuki; Kumamoto, Hiroki; Takahashi, Keitaro; Kuroyanagi, Sachiko

2018-04-01

A new detection method for ultra-low frequency gravitational waves (GWs) with a frequency much lower than the observational range of pulsar timing arrays (PTAs) was suggested in Yonemaru et al. (2016). In the PTA analysis, ultra-low frequency GWs (≲ 10-10 Hz) which evolve just linearly during the observation time span are absorbed by the pulsar spin-down rates since both have the same effect on the pulse arrival time. Therefore, such GWs cannot be detected by the conventional method of PTAs. However, the bias on the observed spin-down rates depends on relative direction of a pulsar and GW source and shows a quadrupole pattern in the sky. Thus, if we divide the pulsars according to the position in the sky and see the difference in the statistics of the spin-down rates, ultra-low frequency GWs from a single source can be detected. In this paper, we evaluate the potential of this method by Monte-Carlo simulations and estimate the sensitivity, considering only the "Earth term" while the "pulsar term" acts like random noise for GW frequencies 10-13 - 10-10 Hz. We find that with 3,000 milli-second pulsars, which are expected to be discovered by a future survey with the Square Kilometre Array, GWs with the derivative of amplitude of about 3 × 10^{-19} {s}^{-1} can in principle be detected. Implications for possible supermassive binary black holes in Sgr* and M87 are also given.

A typology of health marketing research methods--combining public relations methods with organizational concern.

Science.gov (United States)

Rotarius, Timothy; Wan, Thomas T H; Liberman, Aaron

2007-01-01

Research plays a critical role throughout virtually every conduit of the health services industry. The key terms of research, public relations, and organizational interests are discussed. Combining public relations as a strategic methodology with the organizational concern as a factor, a typology of four different research methods emerges. These four health marketing research methods are: investigative, strategic, informative, and verification. The implications of these distinct and contrasting research methods are examined.

Separation methods for acyclovir and related antiviral compounds.

Science.gov (United States)

Loregian, A; Gatti, R; Palù, G; De Palo, E F

2001-11-25

Acyclovir (ACV) is an antiviral drug, which selectively inhibits replication of members of the herpes group of DNA viruses with low cell toxicity. Valaciclovir (VACV), a prodrug of ACV is usually preferred in the oral treatment of viral infections, mainly herpes simplex virus (HSV). Also other analogues such as ganciclovir and penciclovir are discussed here. The former acts against cytomegalovirus (CMV) in general and the latter against CMV retinitis. The action mechanism of these antiviral drugs is presented briefly here, mainly via phosphorylation and inhibition of the viral DNA polymerase. The therapeutic use and the pharmacokinetics are also outlined. The measurement of the concentration of acyclovir and related compounds in biological samples poses a particularly significant challenge because these drugs tend to be structurally similar to endogenous substances. The analysis requires the use of highly selective analytical techniques and chromatography methods are a first choice to determine drug content in pharmaceuticals and to measure them in body fluids. Chromatography can be considered the procedure of choice for the bio-analysis of this class of antiviral compounds, as this methodology is characterised by good specificity and accuracy and it is particularly useful when metabolites need to be monitored. Among chromatographic techniques, the reversed-phase (RP) HPLC is widely used for the analysis. C18 Silica columns from 7.5 to 30 cm in length are used, the separation is carried out mainly at room temperature and less than 10 min is sufficient for the analysis at 1.0-1.5 ml/min of flow-rate. The separation methods require an isocratic system, and various authors have proposed a variety of mobile phases. The detection requires absorbance or fluorescence measurements carried out at 250-254 nm and at lambdaex=260-285 nm, lambdaem=375-380 nm, respectively. The detection limit is about 0.3-10 ng/ml but the most important aspect is related to the sample treatment

Standard test method for measurement of fatigue crack growth rates

CERN Document Server

American Society for Testing and Materials. Philadelphia

2015-01-01

1.1 This test method covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability. Results are expressed in terms of the crack-tip stress-intensity factor range (ΔK), defined by the theory of linear elasticity. 1.2 Several different test procedures are provided, the optimum test procedure being primarily dependent on the magnitude of the fatigue crack growth rate to be measured. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength so long as specimens are of sufficient thickness to preclude buckling and of sufficient planar size to remain predominantly elastic during testing. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size is variable to be adjusted for yield strength and applied force. Specimen thickness may be varied independent of planar size. 1.5 The details of the various specimens and test configurations are shown in Annex A1-Annex A3. Specimen configurations other than t...

Open charcoal chamber method for mass measurements of radon exhalation rate from soil surface

International Nuclear Information System (INIS)

Tsapalov, Andrey; Kovler, Konstantin; Miklyaev, Peter

2016-01-01

Radon exhalation rate from the soil surface can serve as an important criterion in the evaluation of radon hazard of the land. Recently published international standard ISO 11665-7 (2012) is based on the accumulation of radon gas in a closed container. At the same time since 1998 in Russia, as a part of engineering and environmental studies for the construction, radon flux measurements are made using an open charcoal chamber for a sampling duration of 3–5 h. This method has a well-defined metrological justification and was tested in both favorable and unfavorable conditions. The article describes the characteristics of the method, as well as the means of sampling and measurement of the activity of radon absorbed. The results of the metrological study suggest that regardless of the sampling conditions (weather, the mechanism and rate of radon transport in the soil, soil properties and conditions), uncertainty of method does not exceed 20%, while the combined standard uncertainty of radon exhalation rate measured from the soil surface does not exceed 30%. The results of the daily measurements of radon exhalation rate from the soil surface at the experimental site during one year are reported. - Highlights: • Radon exhalation rate from the soil surface area of 32 cm"2 can be measured at level of 10 mBq/(m"2s) at the uncertainty ≤30%. • The method has a metrological justification. • No need to consider climate conditions, soil properties and conditions, mechanism and rate of radon transport in the soil.

High Rates of All-cause and Gastroenteritis-related Hospitalization Morbidity and Mortality among HIV-exposed Indian Infants

Directory of Open Access Journals (Sweden)

Tripathy Srikanth

2011-07-01

Full Text Available Abstract Background HIV-infected and HIV-exposed, uninfected infants experience a high burden of infectious morbidity and mortality. Hospitalization is an important metric for morbidity and is associated with high mortality, yet, little is known about rates and causes of hospitalization among these infants in the first 12 months of life. Methods Using data from a prevention of mother-to-child transmission (PMTCT trial (India SWEN, where HIV-exposed breastfed infants were given extended nevirapine, we measured 12-month infant all-cause and cause-specific hospitalization rates and hospitalization risk factors. Results Among 737 HIV-exposed Indian infants, 93 (13% were HIV-infected, 15 (16% were on HAART, and 260 (35% were hospitalized 381 times by 12 months of life. Fifty-six percent of the hospitalizations were attributed to infections; gastroenteritis was most common accounting for 31% of infectious hospitalizations. Gastrointestinal-related hospitalizations steadily increased over time, peaking around 9 months. The 12-month all-cause hospitalization, gastroenteritis-related hospitalization, and in-hospital mortality rates were 906/1000 PY, 229/1000 PY, and 35/1000 PY respectively among HIV-infected infants and 497/1000 PY, 107/1000 PY, and 3/1000 PY respectively among HIV-exposed, uninfected infants. Advanced maternal age, infant HIV infection, gestational age, and male sex were associated with higher all-cause hospitalization risk while shorter duration of breastfeeding and abrupt weaning were associated with gastroenteritis-related hospitalization. Conclusions HIV-exposed Indian infants experience high rates of all-cause and infectious hospitalization (particularly gastroenteritis and in-hospital mortality. HIV-infected infants are nearly 2-fold more likely to experience hospitalization and 10-fold more likely to die compared to HIV-exposed, uninfected infants. The combination of scaling up HIV PMTCT programs and implementing proven health

Predicting hepatitis B monthly incidence rates using weighted Markov chains and time series methods.

Science.gov (United States)

Shahdoust, Maryam; Sadeghifar, Majid; Poorolajal, Jalal; Javanrooh, Niloofar; Amini, Payam

2015-01-01

Hepatitis B (HB) is a major global mortality. Accurately predicting the trend of the disease can provide an appropriate view to make health policy disease prevention. This paper aimed to apply three different to predict monthly incidence rates of HB. This historical cohort study was conducted on the HB incidence data of Hamadan Province, the west of Iran, from 2004 to 2012. Weighted Markov Chain (WMC) method based on Markov chain theory and two time series models including Holt Exponential Smoothing (HES) and SARIMA were applied on the data. The results of different applied methods were compared to correct percentages of predicted incidence rates. The monthly incidence rates were clustered into two clusters as state of Markov chain. The correct predicted percentage of the first and second clusters for WMC, HES and SARIMA methods was (100, 0), (84, 67) and (79, 47) respectively. The overall incidence rate of HBV is estimated to decrease over time. The comparison of results of the three models indicated that in respect to existing seasonality trend and non-stationarity, the HES had the most accurate prediction of the incidence rates.

A relation between calculated human body exergy consumption rate and subjectively assessed thermal sensation

Energy Technology Data Exchange (ETDEWEB)

Simone, Angela; Kolarik, Jakub; Olesen, Bjarne W. [ICIEE/BYG, Technical University of Denmark (Denmark); Iwamatsu, Toshiya [Faculty of Urban Environmental Science, Tokyo Metropolitan University (Japan); Asada, Hideo [Architech Consulting Co., Tokyo (Japan); Dovjak, Mateja [Faculty of Civil and Geodetic Engineering, University of Ljubljana (Slovenia); Schellen, Lisje [Eindhoven University of Technology, Faculty of Architecture Building and Planning (Netherlands); Shukuya, Masanori [Laboratory of Building Environment, Tokyo City University, Yokohama (Japan)

2011-01-15

Application of the exergy concept to research on the built environment is a relatively new approach. It helps to optimize climate conditioning systems so that they meet the requirements of sustainable building design. As the building should provide a healthy and comfortable environment for its occupants, it is reasonable to consider both the exergy flows in building and those within the human body. Until now, no data have been available on the relation between human-body exergy consumption rates and subjectively assessed thermal sensation. The objective of the present work was to relate thermal sensation data, from earlier thermal comfort studies, to calculated human-body exergy consumption rates. The results show that the minimum human body exergy consumption rate is associated with thermal sensation votes close to thermal neutrality, tending to the slightly cool side of thermal sensation. Generally, the relationship between air temperature and the exergy consumption rate, as a first approximation, shows an increasing trend. Taking account of both convective and radiative heat exchange between the human body and the surrounding environment by using the calculated operative temperature, exergy consumption rates increase as the operative temperature increases above 24 C or decreases below 22 C. With the data available so far, a second-order polynomial relationship between thermal sensation and the exergy consumption rate was established. (author)

Shutdown Dose Rate Analysis Using the Multi-Step CADIS Method

International Nuclear Information System (INIS)

Ibrahim, Ahmad M.; Peplow, Douglas E.; Peterson, Joshua L.; Grove, Robert E.

2015-01-01

The Multi-Step Consistent Adjoint Driven Importance Sampling (MS-CADIS) hybrid Monte Carlo (MC)/deterministic radiation transport method was proposed to speed up the shutdown dose rate (SDDR) neutron MC calculation using an importance function that represents the neutron importance to the final SDDR. This work applied the MS-CADIS method to the ITER SDDR benchmark problem. The MS-CADIS method was also used to calculate the SDDR uncertainty resulting from uncertainties in the MC neutron calculation and to determine the degree of undersampling in SDDR calculations because of the limited ability of the MC method to tally detailed spatial and energy distributions. The analysis that used the ITER benchmark problem compared the efficiency of the MS-CADIS method to the traditional approach of using global MC variance reduction techniques for speeding up SDDR neutron MC calculation. Compared to the standard Forward-Weighted-CADIS (FW-CADIS) method, the MS-CADIS method increased the efficiency of the SDDR neutron MC calculation by 69%. The MS-CADIS method also increased the fraction of nonzero scoring mesh tally elements in the space-energy regions of high importance to the final SDDR

Self-rated health, psychosocial functioning, and health-related behavior among Thai adolescents.

Science.gov (United States)

Page, Randy M; Suwanteerangkul, Jiraporn

2009-02-01

Despite the popularity of self-rated health (SRH) in Western countries as a useful public health tool, it has only rarely been used in Asian countries. The purpose of the current study was to determine whether measures of psychosocial functioning and health-related factors differ according to SRH in a school-based sample of Thai adolescents. The survey was given to 2519 adolescents attending 10 coeducational secondary high schools in Chiang Mai Province, Thailand and included measures of psychosocial functioning (loneliness, hopelessness, shyness, perceptions of social status, self-rated happiness, and perception of physical attractiveness) and certain health-related factors (height/weight, physical activity, eating breakfast, sleep). The proportion of boys (5.1%) reporting that they were not healthy was similar to the proportion of girls (4.6%) making the same rating. These adolescents showed a pattern of overall poor health risk. Compared to adolescent peers who rated their health as healthy or very healthy, they were less physically active, got less sleep, were more likely to be overweight, and scored lower on loneliness, shyness, hopelessness, and self-rated happiness. The present pattern of poor health risk warrants attention and supports the merit of using SRH in adolescent health assessment. SRH is easy to obtain and simple to assess and single-item assessments of SRH appear to be valid measures of health status in adults and adolescent. Interventions, such as health counseling, mental health counseling, and health education, can target adolescents who rate themselves as 'not healthy' or report poor health status.

An Improved in Vivo Deuterium Labeling Method for Measuring the Biosynthetic Rate of Cytokinins

Directory of Open Access Journals (Sweden)

Petr Tarkowski

2010-12-01

Full Text Available An improved method for determining the relative biosynthetic rate of isoprenoid cytokinins has been developed. A set of 11 relevant isoprenoid cytokinins, including zeatin isomers, was separated by ultra performance liquid chromatography in less than 6 min. The iP-type cytokinins were observed to give rise to a previously-unknown fragment at m/z 69; we suggest that the diagnostic (204-69 transition can be used to monitor the biosynthetic rate of isopentenyladenine. Furthermore, we found that by treating the cytokinin nucleotides with alkaline phosphatase prior to analysis, the sensitivity of the detection process could be increased. In addition, derivatization (propionylation improved the ESI-MS response by increasing the analytes' hydrophobicity. Indeed, the ESI-MS response of propionylated isopentenyladenosine was about 34% higher than that of its underivatized counterpart. Moreover, the response of the derivatized zeatin ribosides was about 75% higher than that of underivatized zeatin ribosides. Finally, we created a web-based calculator (IZOTOP that facilitates MS/MS data processing and offer it freely to the research community.

The Neutral Interest Rate: Estimates for Chile

OpenAIRE

Rodrigo Fuentes S; Fabián Gredig U.

2008-01-01

To estimate the neutral real interest rate for Chile, we use a variety of methods that can be classified into three categories: those derived from economic theory, the neutral rate implicit in financial assets, and statistical procedures using macroeconomic data. We conclude that the neutral rate is not constant over time, but it is closely related with—though not equivalent to—the potential GDP growth rate. The application of the different methods yields fairly similar results. The neutral r...

Optimization of automation: III. Development of optimization method for determining automation rate in nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung Min; Kim, Jong Hyun; Kim, Man Cheol; Seong, Poong Hyun

2016-01-01

Highlights: • We propose an appropriate automation rate that enables the best human performance. • We analyze the shortest working time considering Situation Awareness Recovery (SAR). • The optimized automation rate is estimated by integrating the automation and ostracism rate estimation methods. • The process to derive the optimized automation rate is demonstrated through case studies. - Abstract: Automation has been introduced in various industries, including the nuclear field, because it is commonly believed that automation promises greater efficiency, lower workloads, and fewer operator errors through reducing operator errors and enhancing operator and system performance. However, the excessive introduction of automation has deteriorated operator performance due to the side effects of automation, which are referred to as Out-of-the-Loop (OOTL), and this is critical issue that must be resolved. Thus, in order to determine the optimal level of automation introduction that assures the best human operator performance, a quantitative method of optimizing the automation is proposed in this paper. In order to propose the optimization method for determining appropriate automation levels that enable the best human performance, the automation rate and ostracism rate, which are estimation methods that quantitatively analyze the positive and negative effects of automation, respectively, are integrated. The integration was conducted in order to derive the shortest working time through considering the concept of situation awareness recovery (SAR), which states that the automation rate with the shortest working time assures the best human performance. The process to derive the optimized automation rate is demonstrated through an emergency operation scenario-based case study. In this case study, four types of procedures are assumed through redesigning the original emergency operating procedure according to the introduced automation and ostracism levels. Using the

Development of new method and protocol for cryopreservation related to embryo and oocytes freezing in terms of fertilization rate: A comparative study including review of literature.

Science.gov (United States)

Barik, Mayadhar; Bajpai, Minu; Patnaik, Santosh; Mishra, Pravash; Behera, Priyamadhaba; Dwivedi, Sada Nanda

2016-01-01

Cryopreservation is basically related to meritorious thin samples or small clumps of cells that are cooled quickly without loss. Our main objective is to establish and formulate an innovative method and protocol development for cryopreservation as a gold standard for clinical uses in laboratory practice and treatment. The knowledge regarding usefulness of cryopreservation in clinical practice is essential to carry forward the clinical practice and research. We are trying to compare different methods of cryopreservation (in two dozen of cells) at the same time we compare the embryo and oocyte freezing interms of fertilization rate according to the International standard protocol. The combination of cryoprotectants and regimes of rapid cooling and rinsing during warming often allows successful cryopreservation of biological materials, particularly cell suspensions or thin tissue samples. Examples include semen, blood, tissue samples like tumors, histological cross-sections, human eggs and human embryos. Although presently many studies have reported that the children born from frozen embryos or "frosties," show consistently positive results with no increase in birth defects or development abnormalities is quite good enough and similar to our study (50-85%). We ensure that cryopreservation technology provided useful cell survivability, tissue and organ preservation in a proper way. Although it varies according to different laboratory conditions, it is certainly beneficial for patient's treatment and research. Further studies are needed for standardization and development of new protocol.

A finite element modeling method for predicting long term corrosion rates

International Nuclear Information System (INIS)

Fu, J.W.; Chan, S.

1984-01-01

For the analyses of galvanic corrosion, pitting and crevice corrosion, which have been identified as possible corrosion processes for nuclear waste isolation, a finite element method has been developed for the prediction of corrosion rates. The method uses a finite element mesh to model the corrosive environment and the polarization curves of metals are assigned as the boundary conditions to calculate the corrosion cell current distribution. A subroutine is used to calculate the chemical change with time in the crevice or the pit environments. In this paper, the finite element method is described along with experimental confirmation

The method of treatment cessation and recurrence rate of amblyopia.

Science.gov (United States)

Walsh, Leah A; Hahn, Erik K; LaRoche, G Robert

2009-09-01

To date, much of the research regarding amblyopia has been focused on which therapeutic modality is the most efficacious in amblyopia management. Unfortunately, there is a lack of research into which method of treatment cessation is the most appropriate once therapy has been completed. The purpose of this study is to investigate if the cessation method affects the recurrence rate of amblyopia. This study was a prospective randomized clinical trial of 20 subjects who were wearing full-time occlusion and were at the end point of their therapy. The subjects were randomized into one of two groups: abrupt cessation or therapy tapering. All subjects were followed for 3 consecutive 4-week intervals, for a total of 12 weeks, to assess the short-term recurrence rate of amblyopia. Subjects who were in the tapered group had their occlusion reduced from full-time occlusion (all waking hours minus one) to 50% of waking hours at study enrollment (i.e., from 12 hours/day to 6 hours per day); occlusion was reduced by an additional 50% at the first 4-week study visit (i.e., from 6 hours/day to 3 hours), with occlusion being discontinued completely at the week 8 visit. All subjects who were in the abrupt cessation group had their full-time occlusion discontinued completely at the start of the study (i.e., from 12 hours/day to none). Additional assessments were also conducted at week 26 and week 52 post-therapy cessation to determine the longer term amblyopia regression rate. For the purposes of this study, recurrence was defined as a 0.2 (10 letters) or more logarithm of the minimum angle of resolution (logMAR) loss of visual acuity. A recurrence of amblyopia occurred in 4 of 17 (24%; CI 9%-47%) participants completing the study by the week 52 study end point. There were 2 subjects from each treatment group who demonstrated a study protocol-defined recurrence. There was a 24% risk of amblyopia recurrence if therapy was discontinued abruptly or tapered in 8 weeks. In this small

NDT method in determining the rate of corrosion applicable to risk based inspection

International Nuclear Information System (INIS)

Mohamed Hairul Hasmoni; Mohamad Pauzi Ismail; Ab Razak Hamzah

2004-01-01

Corrosion is a major problem in oil and gas industries, refineries and chemical process plants as the equipment is often exposed to corrosive environments or elevated temperature. Important equipment need to operate safely and reliably to avoid injuries to personnel and the public, and to prevent loss time and cost incurred due to loss of production and shutdown. The paper assess the approach in evaluating the technique of non-destructive testing (NDT) using Ultrasonic Testing (UT) in determining the rate of corrosion and remaining life of equipment applicable to Risk Based Inspection (RBI). Methods in determining the corrosion rate are presented using analytical method. Examples and data from MINT chiller water pipeline are presented to illustrate the application of these methods. (Author)

Leaching of radionuclides from decaying blueberry leaves: Relative rate independent of concentration

Energy Technology Data Exchange (ETDEWEB)

Sheppard, S.C.; Evenden, W.G. (Atomic Energy of Canada Ltd., Pinawa, Manitoba (Canada))

Leaching of radionuclides from decaying vegetation has not been extensively investigated, especially for radionuclides other than {sup 137}Cs. The authors obtained leaves of blueberry (Vaccinium angustifolium {times} V. corymbosum) that contained over 25-fold ranges in Se, Cs, and I concentrations, as well as a small quantity of leaves containing detectable U. All were contaminated by way of root uptake. Leaching took place for a period of 1 yr in the laboratory, using leach water from forest litter. Monthly, measurements were made of the radionuclide contents and decaying leaf dry weights. The data conformed to an exponential decay model with two first-order components. In no case did the relative loss rates vary systematically with the initial tissue radionuclide concentrations. Loss rates decreased in the order Cs > I > U > dry wt. > Se. Because of the low leaching rate of Se relative to the loss of dry weight, decaying litter may actually accumulate elements such as Se. Accumulation of radionuclides in litter could have important implications for lateral transport, recycling, and direct incorporation into edible mushrooms.

Leaching of radionuclides from decaying blueberry leaves: Relative rate independent of concentration

International Nuclear Information System (INIS)

Sheppard, S.C.; Evenden, W.G.

1990-01-01

Leaching of radionuclides from decaying vegetation has not been extensively investigated, especially for radionuclides other than 137 Cs. The authors obtained leaves of blueberry (Vaccinium angustifolium x V. corymbosum) that contained over 25-fold ranges in Se, Cs, and I concentrations, as well as a small quantity of leaves containing detectable U. All were contaminated by way of root uptake. Leaching took place for a period of 1 yr in the laboratory, using leach water from forest litter. Monthly, measurements were made of the radionuclide contents and decaying leaf dry weights. The data conformed to an exponential decay model with two first-order components. In no case did the relative loss rates vary systematically with the initial tissue radionuclide concentrations. Loss rates decreased in the order Cs > I > U > dry wt. > Se. Because of the low leaching rate of Se relative to the loss of dry weight, decaying litter may actually accumulate elements such as Se. Accumulation of radionuclides in litter could have important implications for lateral transport, recycling, and direct incorporation into edible mushrooms

Equilibration kinetics in isolated and membrane-bound photosynthetic reaction centers upon illumination: a method to determine the photoexcitation rate.

Science.gov (United States)

Manzo, Anthony J; Goushcha, Alexander O; Barabash, Yuri M; Kharkyanen, Valery N; Scott, Gary W

2009-07-01

Kinetics of electron transfer, following variation of actinic light intensity, for photosynthetic reaction centers (RCs) of purple bacteria (isolated and membrane-bound) were analyzed by measuring absorbance changes in the primary photoelectron donor absorption band at 865 nm. The bleaching of the primary photoelectron donor absorption band in RCs, following a sudden increase of illumination from the dark to an actinic light intensity of I(exp), obeys a simple exponential law with the rate constant alphaI(exp) + k(rec), in which alpha is a parameter relating the light intensity, measured in mW/cm(2), to a corresponding theoretical rate in units of reciprocal seconds, and k(rec) is the effective rate constant of the charge recombination in the photosynthetic RCs. In this work, a method for determining the alpha parameter value is developed and experimentally verified for isolated and membrane-bound RCs, allowing for rigorous modeling of RC macromolecule dynamics under varied photoexcitation conditions. Such modeling is necessary for RCs due to alterations of the forward photoexcitation rates and relaxation rates caused by illumination history and intramolecular structural dynamics effects. It is demonstrated that the classical Bouguer-Lambert-Beer formalism can be applied for the samples with relatively low scattering, which is not necessarily the case with strongly scattering media or high light intensity excitation.

System and Method for Determining Rate of Rotation Using Brushless DC Motor

Science.gov (United States)

Howard, David E. (Inventor); Smith, Dennis A. (Inventor)

2000-01-01

A system and method are provided for measuring rate of rotation. A brushless DC motor is rotated and produces a back electromagnetic force (emf) on each winding thereof. Each winding's back-emf is squared. The squared outputs associated with each winding are combined, with the square root being taken of such combination, to produce a DC output proportional only to the rate of rotation of the motor's shaft.

Assessing Teachers' Judgements of Students' Academic Motivation and Emotions across Two Rating Methods

Science.gov (United States)

Zhu, Mingjing; Urhahne, Detlef

2014-01-01

The present study examines the accuracy of teachers' judgements about students' motivation and emotions in English learning with two different rating methods. A sample of 480 sixth-grade Chinese students reported their academic self-concept, learning effort, enjoyment, and test anxiety via a questionnaire and were rated on these dimensions by…

Relative tropospheric photolysis rates of acetaldehyde and formaldehyde measured at the European Photoreactor Facility

DEFF Research Database (Denmark)

Nilsson, Elna Johanna Kristina; Bache-Andreassen, Lihn; Johnson, Matthew Stanley

2009-01-01

The photolysis rates of HCHO, DCDO, CH3CHO, and CH3CDO are studied by long-path FTIR spectroscopy in natural tropospheric conditions at the European Photoreactor Facility (EUPHORE) in Valencia, Spain. Average relative photolysis rates jHCHO/jDCDO ) 3.15 ( 0.08 and jCH3CHO/jCH3CDO ) 1.26 ( 0.03 ar.......03 are obtained from three days of experiments for each reaction in the period June 17 to July 7, 2006.......The photolysis rates of HCHO, DCDO, CH3CHO, and CH3CDO are studied by long-path FTIR spectroscopy in natural tropospheric conditions at the European Photoreactor Facility (EUPHORE) in Valencia, Spain. Average relative photolysis rates jHCHO/jDCDO ) 3.15 ( 0.08 and jCH3CHO/jCH3CDO ) 1.26 ( 0...

A relation between calculated human body exergy consumption rate and subjectively assessed thermal sensation

DEFF Research Database (Denmark)

Simone, Angela; Kolarik, Jakub; Iwamatsu, Toshiya

2011-01-01

occupants, it is reasonable to consider both the exergy flows in building and those within the human body. Until now, no data have been available on the relation between human-body exergy consumption rates and subjectively assessed thermal sensation. The objective of the present work was to relate thermal...... sensation data, from earlier thermal comfort studies, to calculated human-body exergy consumption rates. The results show that the minimum human body exergy consumption rate is associated with thermal sensation votes close to thermal neutrality, tending to the slightly cool side of thermal sensation....... Generally, the relationship between air temperature and the exergy consumption rate, as a first approximation, shows an increasing trend. Taking account of both convective and radiative heat exchange between the human body and the surrounding environment by using the calculated operative temperature, exergy...

A method for radiobiological investigations in radiation fields with different LET and high dose rates

International Nuclear Information System (INIS)

Grundler, W.

1976-01-01

For investigations: 1. Performed in the field of radiobiology with different LET-radiation and a relatively high background dose rate of one component (e.g. investigations with fast and intermediate reactor neutrons) 2. Concerning radiation risk studies within a wide range 3. Of irradiations, covering a long time period (up to 100 days) a test system is necessary which on the one hand makes it possible to analyze the influence of different LET radiation and secondly shows a relative radiation resistant behaviour and allows a simple cell cycle regulation. A survey is given upon the installed device of a simple cell observation method, the biological test system used and the analysis of effects caused by dose, repair and LET. It is possible to analyze the behaviour of the nonsurvival cells and to demonstrate different reactions of the test parameters to the radiation of different LET. (author)

Conformal methods in general relativity

CERN Document Server

Valiente Kroon, Juan A

2016-01-01

This book offers a systematic exposition of conformal methods and how they can be used to study the global properties of solutions to the equations of Einstein's theory of gravity. It shows that combining these ideas with differential geometry can elucidate the existence and stability of the basic solutions of the theory. Introducing the differential geometric, spinorial and PDE background required to gain a deep understanding of conformal methods, this text provides an accessible account of key results in mathematical relativity over the last thirty years, including the stability of de Sitter and Minkowski spacetimes. For graduate students and researchers, this self-contained account includes useful visual models to help the reader grasp abstract concepts and a list of further reading, making this the perfect reference companion on the topic.

Exchange Rate – Relative Price Nonlinear Cointegration Relationship in Malaysia

OpenAIRE

Venus Khim-Sen Liew; Chee-Keong Choong; Evan Lau; Kian-Ping Lim

2005-01-01

The finding of exchange rate–relative price nonlinear cointegration relationship in Malaysia, among others, suggests that nonlinear Purchasing Power Parity (PPP) equilibrium may be regarded as reference point in judging the short run misalignment of the Ringgit currency and thereby deducing effective policy actions. Moreover, economists who wish to extend the simple PPP exchange rate model into the more complicated monetary exchange models may do so comfortably, at least in the text of Mala...

Stellar Absorption Line Analysis of Local Star-forming Galaxies: The Relation between Stellar Mass, Metallicity, Dust Attenuation, and Star Formation Rate

Energy Technology Data Exchange (ETDEWEB)

Jabran Zahid, H. [Smithsonian Astrophysical Observatory, Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Kudritzki, Rolf-Peter; Ho, I-Ting [University of Hawaii at Manoa, Institute for Astronomy, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Conroy, Charlie [Department of Astronomy, Harvard University, Cambridge, MA, 02138 (United States); Andrews, Brett, E-mail: zahid@cfa.harvard.edu [PITT PACC, Department of Physics and Astronomy, University of Pittsburgh, 3941 O’Hara Street, Pittsburgh, PA 15260 (United States)

2017-09-20

We analyze the optical continuum of star-forming galaxies in the Sloan Digital Sky Survey by fitting stacked spectra with stellar population synthesis models to investigate the relation between stellar mass, stellar metallicity, dust attenuation, and star formation rate. We fit models calculated with star formation and chemical evolution histories that are derived empirically from multi-epoch observations of the stellar mass–star formation rate and the stellar mass–gas-phase metallicity relations, respectively. We also fit linear combinations of single-burst models with a range of metallicities and ages. Star formation and chemical evolution histories are unconstrained for these models. The stellar mass–stellar metallicity relations obtained from the two methods agree with the relation measured from individual supergiant stars in nearby galaxies. These relations are also consistent with the relation obtained from emission-line analysis of gas-phase metallicity after accounting for systematic offsets in the gas-phase metallicity. We measure dust attenuation of the stellar continuum and show that its dependence on stellar mass and star formation rate is consistent with previously reported results derived from nebular emission lines. However, stellar continuum attenuation is smaller than nebular emission line attenuation. The continuum-to-nebular attenuation ratio depends on stellar mass and is smaller in more massive galaxies. Our consistent analysis of stellar continuum and nebular emission lines paves the way for a comprehensive investigation of stellar metallicities of star-forming and quiescent galaxies.

Stellar Absorption Line Analysis of Local Star-forming Galaxies: The Relation between Stellar Mass, Metallicity, Dust Attenuation, and Star Formation Rate

International Nuclear Information System (INIS)

Jabran Zahid, H.; Kudritzki, Rolf-Peter; Ho, I-Ting; Conroy, Charlie; Andrews, Brett

2017-01-01

We analyze the optical continuum of star-forming galaxies in the Sloan Digital Sky Survey by fitting stacked spectra with stellar population synthesis models to investigate the relation between stellar mass, stellar metallicity, dust attenuation, and star formation rate. We fit models calculated with star formation and chemical evolution histories that are derived empirically from multi-epoch observations of the stellar mass–star formation rate and the stellar mass–gas-phase metallicity relations, respectively. We also fit linear combinations of single-burst models with a range of metallicities and ages. Star formation and chemical evolution histories are unconstrained for these models. The stellar mass–stellar metallicity relations obtained from the two methods agree with the relation measured from individual supergiant stars in nearby galaxies. These relations are also consistent with the relation obtained from emission-line analysis of gas-phase metallicity after accounting for systematic offsets in the gas-phase metallicity. We measure dust attenuation of the stellar continuum and show that its dependence on stellar mass and star formation rate is consistent with previously reported results derived from nebular emission lines. However, stellar continuum attenuation is smaller than nebular emission line attenuation. The continuum-to-nebular attenuation ratio depends on stellar mass and is smaller in more massive galaxies. Our consistent analysis of stellar continuum and nebular emission lines paves the way for a comprehensive investigation of stellar metallicities of star-forming and quiescent galaxies.

Citation Rate of Highly-Cited Papers in 100 Kinesiology-Related Journals

Science.gov (United States)

Knudson, Duane

2015-01-01

This study extended previous research on several citation-based bibliometric variables for highly cited articles in a large (N = 100) number of journals related to Kinesiology. Total citations and citation rate of the 30 most highly cited articles in each journal were identified by searchers of "Google Scholar (GS)". Other major…

GROWTH RATE DISTRIBUTION OF BORAX SINGLE CRYSTALS ON THE (001 FACE UNDER VARIOUS FLOW RATES

Directory of Open Access Journals (Sweden)

Suharso Suharso

2010-06-01

Full Text Available The growth rates of borax single crystals from aqueous solutions at various flow rates in the (001 direction were measured using in situ cell method. From the growth rate data obtained, the growth rate distribution of borax crystals was investigated using Minitab Software and SPSS Software at relative supersaturation of 0807 and temperature of 25 °C. The result shows that normal, gamma, and log-normal distribution give a reasonably good fit to GRD. However, there is no correlation between growth rate distribution and flow rate of solution.   Keywords: growth rate dispersion (GRD, borax, flow rate

Simplified method of ''push-pull'' test data analysis for determining in situ reaction rate coefficients

International Nuclear Information System (INIS)

Haggerty, R.; Schroth, M.H.; Istok, J.D.

1998-01-01

The single-well, ''''push-pull'''' test method is useful for obtaining information on a wide variety of aquifer physical, chemical, and microbiological characteristics. A push-pull test consists of the pulse-type injection of a prepared test solution into a single monitoring well followed by the extraction of the test solution/ground water mixture from the same well. The test solution contains a conservative tracer and one or more reactants selected to investigate a particular process. During the extraction phase, the concentrations of tracer, reactants, and possible reaction products are measured to obtain breakthrough curves for all solutes. This paper presents a simplified method of data analysis that can be used to estimate a first-order reaction rate coefficient from these breakthrough curves. Rate coefficients are obtained by fitting a regression line to a plot of normalized concentrations versus elapsed time, requiring no knowledge of aquifer porosity, dispersivity, or hydraulic conductivity. A semi-analytical solution to the advective-dispersion equation is derived and used in a sensitivity analysis to evaluate the ability of the simplified method to estimate reaction rate coefficients in simulated push-pull tests in a homogeneous, confined aquifer with a fully-penetrating injection/extraction well and varying porosity, dispersivity, test duration, and reaction rate. A numerical flow and transport code (SUTRA) is used to evaluate the ability of the simplified method to estimate reaction rate coefficients in simulated push-pull tests in a heterogeneous, unconfined aquifer with a partially penetrating well. In all cases the simplified method provides accurate estimates of reaction rate coefficients; estimation errors ranged from 0.1 to 8.9% with most errors less than 5%

Application of accelerated evaluation method of alteration temperature and constant dose rate irradiation on bipolar linear regulator LM317

International Nuclear Information System (INIS)

Deng Wei; Wu Xue; Wang Xin; Zhang Jinxin; Zhang Xiaofu; Zheng Qiwen; Ma Wuying; Lu Wu; Guo Qi; He Chengfa

2014-01-01

With different irradiation methods including high dose rate irradiation, low dose rate irradiation, alteration temperature and constant dose rate irradiation, and US military standard constant high temperature and constant dose rate irradiation, the ionizing radiation responses of bipolar linear regulator LM317 from three different companies were investigated under the operating and zero biases. The results show that compared with constant high temperature and constant dose rate irradiation method, the alteration temperature and constant dose rate irradiation method can not only very rapidly and accurately evaluate the dose rate effect of three bipolar linear regulators, but also well simulate the damage of low dose rate irradiation. Experiment results make the alteration temperature and constant dose rate irradiation method successfully apply to bipolar linear regulator. (authors)

Relative influence of age, resting heart rate and sedentary life style in short-term analysis of heart rate variability

OpenAIRE

E.R. Migliaro; P. Contreras; S. Bech; A. Etxagibel; M. Castro; R. Ricca; K. Vicente

2001-01-01

In order to assess the relative influence of age, resting heart rate (HR) and sedentary life style, heart rate variability (HRV) was studied in two different groups. The young group (YG) consisted of 9 sedentary subjects aged 15 to 20 years (YG-S) and of 9 nonsedentary volunteers (YG-NS) also aged 15 to 20. The elderly sedentary group (ESG) consisted of 16 sedentary subjects aged 39 to 82 years. HRV was assessed using a short-term procedure (5 min). R-R variability was calculated in the time-...

Method for enhancing microbial utilization rates of gases using perfluorocarbons

Science.gov (United States)

Turick, C.E.

1997-06-10

A method of enhancing the bacterial reduction of industrial gases using perfluorocarbons (PFCs) is disclosed. Because perfluorocarbons (PFCs) allow for a much greater solubility of gases than water does, PFCs have the potential to deliver gases in higher concentrations to microorganisms when used as an additive to microbial growth media thereby increasing the rate of the industrial gas conversion to economically viable chemicals and gases. 3 figs.

Measurement of disintegration rates of 60Co volume sources by the sum-peak method

International Nuclear Information System (INIS)

Kawano, Takao; Ebihara, Hiroshi

1991-01-01

The sum-peak method has been applied to the determination of the disintegration rates of 60 Co volume sources (1.05 x 10 4 Bq, 1.05 x 10 3 Bq and 1.05 x 10 2 Bq, in 100-ml polyethylene bottles) by using a NaI(Tl) detector of a diameter of 50 mm and a height of 50 mm. The experimental results showed that decreasing the disintegration rates resulted in enlarged underestimation in comparison with the true disintegration rates. It was presumed that the underestimations of the disintegration rates determined by the sum-peak method resulted from the overestimations of the areas under the sum peaks caused by the overlap of the area under the Compton scattering of the γ-ray (2614 keV) emitted from a naturally occurring radionuclide 208 Tl under the sum peaks. (author)

Depth-related influences on biodegradation rates of phenanthrene in polluted marine sediments of Puget Sound, WA

International Nuclear Information System (INIS)

Tang, Yinjie J. . E-mail yjtang@lbl.gov; Carpenter, Shelly D.; Deming, Jody W.; Krieger-Brockett, Barbara

2006-01-01

A whole-core injection method was used to determine depth-related rates of microbial mineralization of 14 C-phenanthrene added to both contaminated and clean marine sediments of Puget Sound, WA. For 26-day incubations under micro-aerobic conditions, conversions of 14 C-phenanthrene to 14 CO 2 in heavily PAH-contaminated sediments from two sites in Eagle Harbor were much higher (up to 30%) than those in clean sediments from nearby Blakely Harbor ( 14 C-phenanthrene degradation rates in the surface sediment horizons (0-3 cm) were more rapid (2-3 times) than in the deeper sediment horizons examined (>6 cm), especially in the most PAH polluted EH9 site. Differences in mineralization were associated with properties of the sediments as a function of sediment depth, including grain-size distribution, PAH concentration, total organic matter and total bacterial abundance. When strictly anaerobic incubations (in N 2 /H 2 /CO 2 atmosphere) were used, the phenanthrene biodegradation rates at all sediment depths were two times slower than under micro-aerobic conditions, with methanogenesis observed after 24 days. The main rate-limiting factor for phenanthrene degradation under anaerobic conditions appeared to be the availability of suitable electron acceptors. Addition of calcium sulfate enhanced the first order rate coefficient (k 1 increased from 0.003 to 0.006 day -1 ), whereas addition of soluble nitrate, even at very low concentration ( 1 up to 0.11 day -1 )

Running and Metabolic Demands of Elite Rugby Union Assessed Using Traditional, Metabolic Power, and Heart Rate Monitoring Methods

Science.gov (United States)

Dubois, Romain; Paillard, Thierry; Lyons, Mark; McGrath, David; Maurelli, Olivier; Prioux, Jacques

2017-01-01

The aims of this study were (1) to analyze elite rugby union game demands using 3 different approaches: traditional, metabolic and heart rate-based methods (2) to explore the relationship between these methods and (3) to explore positional differences between the backs and forwards players. Time motion analysis and game demands of fourteen professional players (24.1 ± 3.4 y), over 5 European challenge cup games, were analyzed. Thresholds of 14.4 km·h-1, 20 W.kg-1 and 85% of maximal heart rate (HRmax) were set for high-intensity efforts across the three methods. The mean % of HRmax was 80.6 ± 4.3 % while 42.2 ± 16.5% of game time was spent above 85% of HRmax with no significant differences between the forwards and the backs. Our findings also show that the backs cover greater distances at high-speed than forwards (% difference: +35.2 ± 6.6%; pdemands of professional rugby games. The traditional and the metabolic-power approaches shows a close correlation concerning their relative values, nevertheless the difference in absolute values especially for the high-intensity thresholds demonstrates that the metabolic power approach may represent an interesting alternative to the traditional approaches used in evaluating the high-intensity running efforts required in rugby union games. Key points Elite/professional rugby union players Heart rate monitoring during official games Metabolic power approach PMID:28344455

The yearly rate of Relative Thalamic Atrophy (yrRTA: a simple 2D/3D method for estimating deep gray matter atrophy in Multiple Sclerosis

Directory of Open Access Journals (Sweden)

Manuel eMenéndez-González

2014-08-01

Full Text Available Despite a strong correlation to outcome, the measurement of gray matter (GM atrophy is not being used in daily clinical practice as a prognostic factor and monitor the effect of treatments in Multiple Sclerosis (MS. This is mainly because the volumetric methods available to date are sophisticated and difficult to implement for routine use in most hospitals. In addition, the meaning of raw results from volumetric studies on regions of interest are not always easy to understand. Thus, there is a huge need of a methodology suitable to be applied in daily clinical practice in order to estimate GM atrophy in a convenient and comprehensive way. Given the thalamus is the brain structure found to be more consistently implied in MS both in terms of extent of atrophy and in terms of prognostic value, we propose a solution based in this structure. In particular, we propose to compare the extent of thalamus atrophy (TA with the extent of unspecific, global brain atrophy, represented by ventricular enlargement. We name this ratio the yearly rate of Relative Thalamic Atrophy (yrRTA. In this report we aim to describe the concept of yrRTA and the guidelines for computing it under 2D and 3D approaches and explain the rationale behind this method. We have also conducted a very short crossectional retrospective study to proof the concept of yrRTA. However, we do not seek to describe here the validity of this parameter since these researches are being conducted currently and results will be addressed in future publications.

The yearly rate of Relative Thalamic Atrophy (yrRTA): a simple 2D/3D method for estimating deep gray matter atrophy in Multiple Sclerosis.

Science.gov (United States)

Menéndez-González, Manuel; Salas-Pacheco, José M; Arias-Carrión, Oscar

2014-01-01

Despite a strong correlation to outcome, the measurement of gray matter (GM) atrophy is not being used in daily clinical practice as a prognostic factor and monitor the effect of treatments in Multiple Sclerosis (MS). This is mainly because the volumetric methods available to date are sophisticated and difficult to implement for routine use in most hospitals. In addition, the meanings of raw results from volumetric studies on regions of interest are not always easy to understand. Thus, there is a huge need of a methodology suitable to be applied in daily clinical practice in order to estimate GM atrophy in a convenient and comprehensive way. Given the thalamus is the brain structure found to be more consistently implied in MS both in terms of extent of atrophy and in terms of prognostic value, we propose a solution based in this structure. In particular, we propose to compare the extent of thalamus atrophy with the extent of unspecific, global brain atrophy, represented by ventricular enlargement. We name this ratio the "yearly rate of Relative Thalamic Atrophy" (yrRTA). In this report we aim to describe the concept of yrRTA and the guidelines for computing it under 2D and 3D approaches and explain the rationale behind this method. We have also conducted a very short crossectional retrospective study to proof the concept of yrRTA. However, we do not seek to describe here the validity of this parameter since these researches are being conducted currently and results will be addressed in future publications.

A method to increase optical timing spectra measurement rates using a multi-hit TDC

International Nuclear Information System (INIS)

Moses, W.W.

1993-01-01

A method is presented for using a modern time to digital converter (TDC) to increase the data collection rate for optical timing measurements such as scintillator decay times. It extends the conventional delayed coincidence method, where a synchronization signal ''starts'' a TDC and a photomultiplier tube (PMT) sampling the optical signal ''stops'' the TDC. Data acquisition rates are low with the conventional method because ε, the light collection efficiency of the ''stop'' PMT, is artificially limited to ε∼0.01 photons per ''start'' signal to reduce the probability of detecting more than one photon during the sampling period. With conventional TDCs, these multiple photon events bias the time spectrum since only the first ''stop'' pulse is digitized. The new method uses a modern TDC to detect whether additional ''stop'' signals occur during the sampling period, and actively reject these multiple photon events. This allows ε to be increased to almost 1 photon per ''start'' signal, which maximizes the data acquisition rate at a value nearly 20 times higher. Multi-hit TDCs can digitize the arrival times of n ''stop'' signals per ''start'' signal, which allows ε to be increased to ∼3n/4. While overlap of the ''stop'' signals prevents the full gain in data collection rate to be realized, significant improvements are possible for most applications. (orig.)

Effect of selection for relative growth rate and bodyweight of mice on rate, composition and efficiency of growth

NARCIS (Netherlands)

Bakker, H.

1974-01-01

To evaluate the effect of selection for parameters of a growth curve, four selection lines and a control line were started from one base population. In the selection lines is selected for a large and a small relative growth rate between 21 and 29 days (RGH and RGL) and for a large and

Advanced methods comparisons of reaction rates in the Purdue Fast Breeder Blanket Facility

International Nuclear Information System (INIS)

Hill, R.N.; Ott, K.O.

1988-01-01

A review of worldwide results revealed that reaction rates in the blanket region are generally underpredicted with the discrepancy increasing with penetration; however, these results vary widely. Experiments in the large uniform Purdue Fast Breeder Blanket Facility (FBBF) blanket yield an accurate quantification of this discrepancy. Using standard production code methods (diffusion theory with 50 group cross sections), a consistent Calculated/Experimental (C/E) drop-off was observed for various reaction rates. A 50% increase in the calculated results at the outer edge of the blanket is necessary for agreement with experiments. The usefulness of refined group constant generation utilizing specialized weighting spectra and transport theory methods in correcting this discrepancy was analyzed. Refined group constants reduce the discrepancy to half that observed using the standard method. The surprising result was that transport methods had no effect on the blanket deviations; thus, transport theory considerations do not constitute or even contribute to an explanation of the blanket discrepancies. The residual blanket C/E drop-off (about half the standard drop-off) using advanced methods must be caused by some approximations which are applied in all current methods. 27 refs., 3 figs., 1 tab

Modeling dose-rate on/over the surface of cylindrical radio-models using Monte Carlo methods

International Nuclear Information System (INIS)

Xiao Xuefu; Ma Guoxue; Wen Fuping; Wang Zhongqi; Wang Chaohui; Zhang Jiyun; Huang Qingbo; Zhang Jiaqiu; Wang Xinxing; Wang Jun

2004-01-01

Objective: To determine the dose-rates on/over the surface of 10 cylindrical radio-models, which belong to the Metrology Station of Radio-Geological Survey of CNNC. Methods: The dose-rates on/over the surface of 10 cylindrical radio-models were modeled using the famous Monte Carlo code-MCNP. The dose-rates on/over the surface of 10 cylindrical radio-models were measured by a high gas pressurized ionization chamber dose-rate meter, respectively. The values of dose-rate modeled using MCNP code were compared with those obtained by authors in the present experimental measurement, and with those obtained by other workers previously. Some factors causing the discrepancy between the data obtained by authors using MCNP code and the data obtained using other methods are discussed in this paper. Results: The data of dose-rates on/over the surface of 10 cylindrical radio-models, obtained using MCNP code, were in good agreement with those obtained by other workers using the theoretical method. They were within the discrepancy of ±5% in general, and the maximum discrepancy was less than 10%. Conclusions: As if each factor needed for the Monte Carlo code is correct, the dose-rates on/over the surface of cylindrical radio-models modeled using the Monte Carlo code are correct with an uncertainty of 3%

The Americleft Project: A Modification of Asher-McDade Method for Rating Nasolabial Esthetics in Patients With Unilateral Cleft Lip and Palate Using Q-sort.

Science.gov (United States)

Stoutland, Alicia; Long, Ross E; Mercado, Ana; Daskalogiannakis, John; Hathaway, Ronald R; Russell, Kathleen A; Singer, Emily; Semb, Gunvor; Shaw, William C

2017-11-01

The purpose of this study was to investigate ways to improve rater reliability and satisfaction in nasolabial esthetic evaluations of patients with complete unilateral cleft lip and palate (UCLP), by modifying the Asher-McDade method with use of Q-sort methodology. Blinded ratings of cropped photographs of one hundred forty-nine 5- to 7-year-old consecutively treated patients with complete UCLP from 4 different centers were used in a rating of frontal and profile nasolabial esthetic outcomes by 6 judges involved in the Americleft Project's intercenter outcome comparisons. Four judges rated in previous studies using the original Asher-McDade approach. For the Q-sort modification, rather than projection of images, each judge had cards with frontal and profile photographs of each patient and rated them on a scale of 1 to 5 for vermillion border, nasolabial frontal, and profile, using the Q-sort method with placement of cards into categories 1 to 5. Inter- and intrarater reliabilities were calculated using the Weighted Kappa (95% confidence interval). For 4 raters, the reliabilities were compared with those in previous studies. There was no significant improvement in inter-rater reliabilities using the new method. Intrarater reliability consistently improved. All raters preferred the Q-sort method with rating cards rather than a PowerPoint of photos, which improved internal consistency in rating compared to previous studies using the original Asher-McDade method. All raters preferred this method because of the ability to continuously compare photos and adjust relative ratings between patients.

Throughput Estimation Method in Burst ACK Scheme for Optimizing Frame Size and Burst Frame Number Appropriate to SNR-Related Error Rate

Science.gov (United States)

Ohteru, Shoko; Kishine, Keiji

The Burst ACK scheme enhances effective throughput by reducing ACK overhead when a transmitter sends sequentially multiple data frames to a destination. IEEE 802.11e is one such example. The size of the data frame body and the number of burst data frames are important burst transmission parameters that affect throughput. The larger the burst transmission parameters are, the better the throughput under error-free conditions becomes. However, large data frame could reduce throughput under error-prone conditions caused by signal-to-noise ratio (SNR) deterioration. If the throughput can be calculated from the burst transmission parameters and error rate, the appropriate ranges of the burst transmission parameters could be narrowed down, and the necessary buffer size for storing transmit data or received data temporarily could be estimated. In this paper, we present a method that features a simple algorithm for estimating the effective throughput from the burst transmission parameters and error rate. The calculated throughput values agree well with the measured ones for actual wireless boards based on the IEEE 802.11-based original MAC protocol. We also calculate throughput values for larger values of the burst transmission parameters outside the assignable values of the wireless boards and find the appropriate values of the burst transmission parameters.

Development of a Self-Rated Mixed Methods Skills Assessment: The National Institutes of Health Mixed Methods Research Training Program for the Health Sciences.

Science.gov (United States)

Guetterman, Timothy C; Creswell, John W; Wittink, Marsha; Barg, Fran K; Castro, Felipe G; Dahlberg, Britt; Watkins, Daphne C; Deutsch, Charles; Gallo, Joseph J

2017-01-01

Demand for training in mixed methods is high, with little research on faculty development or assessment in mixed methods. We describe the development of a self-rated mixed methods skills assessment and provide validity evidence. The instrument taps six research domains: "Research question," "Design/approach," "Sampling," "Data collection," "Analysis," and "Dissemination." Respondents are asked to rate their ability to define or explain concepts of mixed methods under each domain, their ability to apply the concepts to problems, and the extent to which they need to improve. We administered the questionnaire to 145 faculty and students using an internet survey. We analyzed descriptive statistics and performance characteristics of the questionnaire using the Cronbach alpha to assess reliability and an analysis of variance that compared a mixed methods experience index with assessment scores to assess criterion relatedness. Internal consistency reliability was high for the total set of items (0.95) and adequate (≥0.71) for all but one subscale. Consistent with establishing criterion validity, respondents who had more professional experiences with mixed methods (eg, published a mixed methods article) rated themselves as more skilled, which was statistically significant across the research domains. This self-rated mixed methods assessment instrument may be a useful tool to assess skills in mixed methods for training programs. It can be applied widely at the graduate and faculty level. For the learner, assessment may lead to enhanced motivation to learn and training focused on self-identified needs. For faculty, the assessment may improve curriculum and course content planning.

Improving the singles rate method for modeling accidental coincidences in high-resolution PET

International Nuclear Information System (INIS)

Oliver, Josep F; Rafecas, Magdalena

2010-01-01

Random coincidences ('randoms') are one of the main sources of image degradation in PET imaging. In order to correct for this effect, an accurate method to estimate the contribution of random events is necessary. This aspect becomes especially relevant for high-resolution PET scanners where the highest image quality is sought and accurate quantitative analysis is undertaken. One common approach to estimate randoms is the so-called singles rate method (SR) widely used because of its good statistical properties. SR is based on the measurement of the singles rate in each detector element. However, recent studies suggest that SR systematically overestimates the correct random rate. This overestimation can be particularly marked for low energy thresholds, below 250 keV used in some applications and could entail a significant image degradation. In this work, we investigate the performance of SR as a function of the activity, geometry of the source and energy acceptance window used. We also investigate the performance of an alternative method, which we call 'singles trues' (ST) that improves SR by properly modeling the presence of true coincidences in the sample. Nevertheless, in any real data acquisition the knowledge of which singles are members of a true coincidence is lost. Therefore, we propose an iterative method, STi, that provides an estimation based on ST but which only requires the knowledge of measurable quantities: prompts and singles. Due to inter-crystal scatter, for wide energy windows ST only partially corrects SR overestimations. While SR deviations are in the range 86-300% (depending on the source geometry), the ST deviations are systematically smaller and contained in the range 4-60%. STi fails to reproduce the ST results, although for not too high activities the deviation with respect to ST is only a few percent. For conventional energy windows, i.e. those without inter-crystal scatter, the ST method corrects the SR overestimations, and deviations from

New method of analyzing well tests in fractured wells using sandface pressure and rate data

Energy Technology Data Exchange (ETDEWEB)

Osman, M.; Almehaideb, R.; Abou-Kassem, J. [U.A.E. University, Al-Ain (United Arab Emirates)

1998-05-01

Analysis of variable flow rate tests has been of special interest recently because in many cases it is impractical to keep a flow rate constant long enough to perform a drawdown test. Further, in many other drawdown and buildup tests, the early data were influenced by wellbore storage effects, and the duration of these effects could be quite long for low-permeability reservoirs. This paper presents a mathematical model which describes drawdown and buildup tests in hydraulically fractured wells. This new method uses a specialized plot approach to analyze the linear flow data and combines it with the superposition of constant-rate solution method for the analysis of psuedoradial flow data. It does not require prior knowledge of the fracture type (uniform-flux or infinite-conductivity); in fact it predicts the fracture type. This method is useful for the analysis of simultaneously measured downhole pressure and sandface rate data. 12 refs., 11 figs., 3 tabs.

Method and apparatus for obtaining enhanced production rate of thermal chemical reactions

Science.gov (United States)

Tonkovich, Anna Lee Y [Pasco, WA; Wang, Yong [Richland, WA; Wegeng, Robert S [Richland, WA; Gao, Yufei [Kennewick, WA

2003-04-01

The present invention is a method and apparatus (vessel) for providing a heat transfer rate from a reaction chamber through a wall to a heat transfer chamber substantially matching a local heat transfer rate of a catalytic thermal chemical reaction. The key to the invention is a thermal distance defined on a cross sectional plane through the vessel inclusive of a heat transfer chamber, reaction chamber and a wall between the chambers. The cross sectional plane is perpendicular to a bulk flow direction of the reactant stream, and the thermal distance is a distance between a coolest position and a hottest position on the cross sectional plane. The thermal distance is of a length wherein the heat transfer rate from the reaction chamber to the heat transfer chamber substantially matches the local heat transfer rate.

Dating of Pregnancy in First versus Second Trimester in Relation to Post-Term Birth Rate: A Cohort Study.

Directory of Open Access Journals (Sweden)

Ida Näslund Thagaard

Full Text Available To evaluate in a national standardised setting whether the performance of ultrasound dating during the first rather than the second trimester of pregnancy had consequences regarding the definition of pre- and post-term birth rates.A cohort study of 8,551 singleton pregnancies with spontaneous delivery was performed from 2006 to 2012 at Copenhagen University Hospital, Holbæk, Denmark. We determined the duration of pregnancy calculated by last menstrual period, crown rump length (CRL, biparietal diameter (1st trimester, BPD (2nd trimester, and head circumference and compared mean and median durations, the mean differences, the systematic discrepancies, and the percentages of pre-term and post-term pregnancies in relation to each method. The primary outcomes were post-term and pre-term birth rates defined by different dating methods.The change from use of second to first trimester measurements for dating was associated with a significant increase in the rate of post-term deliveries from 2.1-2.9% and a significant decrease in the rate of pre-term deliveries from 5.4-4.6% caused by systematic discrepancies. Thereby 25.1% would pass 41 weeks when GA is defined by CRL and 17.3% when BPD (2nd trimester is used. Calibration for these discrepancies resulted in a lower post-term birth rate, from 3.1-1.4%, when first compared to second trimester dating was used.Systematic discrepancies were identified when biometric formulas were used to determine duration of pregnancy. This should be corrected in clinical practice to avoid an overestimation of post-term birth and unnecessary inductions when first trimester formulas are used.

Dating of Pregnancy in First versus Second Trimester in Relation to Post-Term Birth Rate: A Cohort Study.

Science.gov (United States)

Näslund Thagaard, Ida; Krebs, Lone; Lausten-Thomsen, Ulrik; Olesen Larsen, Severin; Holm, Jens-Christian; Christiansen, Michael; Larsen, Torben

2016-01-01

To evaluate in a national standardised setting whether the performance of ultrasound dating during the first rather than the second trimester of pregnancy had consequences regarding the definition of pre- and post-term birth rates. A cohort study of 8,551 singleton pregnancies with spontaneous delivery was performed from 2006 to 2012 at Copenhagen University Hospital, Holbæk, Denmark. We determined the duration of pregnancy calculated by last menstrual period, crown rump length (CRL), biparietal diameter (1st trimester), BPD (2nd trimester), and head circumference and compared mean and median durations, the mean differences, the systematic discrepancies, and the percentages of pre-term and post-term pregnancies in relation to each method. The primary outcomes were post-term and pre-term birth rates defined by different dating methods. The change from use of second to first trimester measurements for dating was associated with a significant increase in the rate of post-term deliveries from 2.1-2.9% and a significant decrease in the rate of pre-term deliveries from 5.4-4.6% caused by systematic discrepancies. Thereby 25.1% would pass 41 weeks when GA is defined by CRL and 17.3% when BPD (2nd trimester) is used. Calibration for these discrepancies resulted in a lower post-term birth rate, from 3.1-1.4%, when first compared to second trimester dating was used. Systematic discrepancies were identified when biometric formulas were used to determine duration of pregnancy. This should be corrected in clinical practice to avoid an overestimation of post-term birth and unnecessary inductions when first trimester formulas are used.

Methods and sensitivity for pass-by measurement of track decay rates

NARCIS (Netherlands)

Dittrich, M.G.

2012-01-01

Track decay rates are measured to characterize the track dynamics for railway noise type testing, but also for other purposes in relation to railway noise. They are often measured statically using hammer response functions on unloaded track, but can also be derived from rail vibrations on loaded

Exchange Rate – Relative Price Nonlinear Cointegration Relationship in Malaysia

OpenAIRE

Venus Khim-Sen Liew; Chee-Keong Choong; Evan Lau; Kian-Ping Lim

2005-01-01

The finding of exchange rate–relative price nonlinear cointegration relationship in Malaysia, among others, suggests that nonlinear Purchasing Power Parity (PPP) equilibrium may be regarded as reference point in judging the short run misalignment of the Ringgit currency and thereby deducing effective policy actions. Moreover, economists who wish to extend the simple PPP exchange rate model into the more complicated monetary exchange models may do so comfortably, at least in the text of Malays...

Dose rate estimates and spatial interpolation maps of outdoor gamma dose rate with geostatistical methods; A case study from Artvin, Turkey

International Nuclear Information System (INIS)

Yeşilkanat, Cafer Mert; Kobya, Yaşar; Taşkin, Halim; Çevik, Uğur

2015-01-01

In this study, compliance of geostatistical estimation methods is compared to ensure investigation and imaging natural Fon radiation using the minimum number of data. Artvin province, which has a quite hilly terrain and wide variety of soil and located in the north–east of Turkey, is selected as the study area. Outdoor gamma dose rate (OGDR), which is an important determinant of environmental radioactivity level, is measured in 204 stations. Spatial structure of OGDR is determined by anisotropic, isotropic and residual variograms. Ordinary kriging (OK) and universal kriging (UK) interpolation estimations were calculated with the help of model parameters obtained from these variograms. In OK, although calculations are made based on positions of points where samples are taken, in the UK technique, general soil groups and altitude values directly affecting OGDR are included in the calculations. When two methods are evaluated based on their performances, it has been determined that UK model (r = 0.88, p < 0.001) gives quite better results than OK model (r = 0.64, p < 0.001). In addition, as a result of the maps created at the end of the study, it was illustrated that local changes are better reflected by UK method compared to OK method and its error variance is found to be lower. - Highlights: • The spatial dispersion of gamma dose rates in Artvin, which possesses one of the roughest lands in Turkey were studied. • The performance of different Geostatistic methods (OK and UK methods) for dispersion of gamma dose rates were compared. • Estimation values were calculated for non-sampling points by using the geostatistical model, the results were mapped. • The general radiological structure was determined in much less time with lower costs compared to experimental methods. • When theoretical methods are evaluated, it was obtained that UK gives more descriptive results compared to OK.

How can the examination failure rate be stabilised?

Science.gov (United States)

Colberg, Anders Barli; Vatn, Daniel; Standal, Rune; Radtke, Maria; Slørdahl, Tobias S

2017-10-31

The study programme in medicine at the Norwegian University of Science and Technology (NTNU) holds written examinations once annually. The limit to achieving a pass grade is at least 65 % correct answers. The failure rate varies from one year to the next. Our hypothesis was that the variations in the failure rate were caused by a varying degree of difficulty in the examination questions. We investigated whether relative standard-setting methods would reduce the variation in the failure rate without lowering the average limit for a pass grade. Cohen’s relative standard-setting methods correct for the degree of difficulty in the examination questions. They are easy to apply and provide an alternative to setting an absolute limit of 65 % for a pass grade. We used data from 34 examinations for medical studies at the Norwegian University of Science and Technology (NTNU) from the period 2010–2015 and compared the failure rates estimated using the existing assessment method with those produced by Cohen’s methods. Using the existing 65 % limit for a pass grade, the failure rate varied from 0 % to 13.7 %, with a falling rate at later stages of the studies. With the exception of the examination held in the first year of study, the failure rate was lower and there was less variation in the failure rate with the original as well as the modified Cohen method when compared to the existing method. One of the Cohen methods resulted in a failure rate of 0 % to 10.4 % In our data material, an absolute limit of 65 % for a pass grade can be defended because the failure rate was generally low. Cohen’s methods could be an alternative in medical schools that have a high failure rate or where there are major variations in the failure rate from one year to the next in the same examination in the course of study.

Large deviations and queueing networks: Methods for rate function identification

OpenAIRE

Atar, Rami; Dupuis, Paul

1999-01-01

This paper considers the problem of rate function identification for multidimensional queueing models with feedback. A set of techniques are introduced which allow this identification when the model possesses certain structural properties. The main tools used are representation formulas for exponential integrals, weak convergence methods, and the regularity properties of associated Skorokhod Problems. Two examples are treated as special cases of the general theory: the classical Jackson netwo...

Suicide epidemics: the impact of newly emerging methods on overall suicide rates - a time trends study

Directory of Open Access Journals (Sweden)

Chang Shu-Sen

2011-05-01

Full Text Available Abstract Background The impact of newly emerging, popular suicide methods on overall rates of suicide has not previously been investigated systematically. Understanding these effects may have important implications for public health surveillance. We examine the emergence of three novel methods of suicide by gassing in the 20th and 21st centuries and determine the impact of emerging methods on overall suicide rates. Methods We studied the epidemic rises in domestic coal gas (1919-1935, England and Wales, motor vehicle exhaust gas (1975-1992, England and Wales and barbecue charcoal gas (1999-2006, Taiwan suicide using Poisson and joinpoint regression models. Joinpoint regression uses contiguous linear segments and join points (points at which trends change to describe trends in incidence. Results Epidemic increases in the use of new methods of suicide were generally associated with rises in overall suicide rates of between 23% and 71%. The recent epidemic of barbecue charcoal suicides in Taiwan was associated with the largest rise in overall rates (40-50% annual rise, whereas the smallest rise was seen for car exhaust gassing in England and Wales (7% annual rise. Joinpoint analyses were only feasible for car exhaust and charcoal burning suicides; these suggested an impact of the emergence of car exhaust suicides on overall suicide rates in both sexes in England and Wales. However there was no statistical evidence of a change in the already increasing overall suicide trends when charcoal burning suicides emerged in Taiwan, possibly due to the concurrent economic recession. Conclusions Rapid rises in the use of new sources of gas for suicide were generally associated with increases in overall suicide rates. Suicide prevention strategies should include strengthening local and national surveillance for early detection of novel suicide methods and implementation of effective media guidelines and other appropriate interventions to limit the spread of

Household projections by the headship rates method: The case of Serbia

Directory of Open Access Journals (Sweden)

Vasić Petar

2017-01-01

Full Text Available The headship rates method (HRM of household projections based on the share of household heads in the total population of the same demographic characteristics (age, sex, nationality, marital status, etc. is the most commonly used method, especially by statistical institutes and planning institutions. The specific rates of household heads by age are calculated by dividing the number of household holders of a certain age with the total number of residents of the appropriate age. The future number of households is then simply projected on the basis of population projections by age and assumptions about the future changes of HR. The HRM is based on the projection of the future age structure of the population. In that sense, the choice of methods of population projection, as well as the method of projecting HR-s have determining impact on the outcome of household projections. Given the methodological inconsistency typical for official population projections in Serbia and significant differences in addressing uncertainty of the future population change between deterministic and probabilistic approach in making population projections, the decision to use a probabilistic projection of the population of Serbia as the basis for calculating the future number of house-holds and their structure according to the age of the household head proved to be a logical choice. However, as the basic aim of this article is to show the simple method of household projections, the above-mentioned stochastic projection is used in utterly deterministic manner. The median of the prediction interval of the population distributed across age is interpreted as the most probable future, or as a prognosis. The HR-s based on the age structure estimates and estimated number of households by age of the household head from Household budget survey (HBS are used for the purpose of HR projecting so that the number of observations would be large enough for calculating inclination parameters

Obtaining source current density related to irregularly structured electromagnetic target field inside human body using hybrid inverse/FDTD method.

Science.gov (United States)

Han, Jijun; Yang, Deqiang; Sun, Houjun; Xin, Sherman Xuegang

2017-01-01

Inverse method is inherently suitable for calculating the distribution of source current density related with an irregularly structured electromagnetic target field. However, the present form of inverse method cannot calculate complex field-tissue interactions. A novel hybrid inverse/finite-difference time domain (FDTD) method that can calculate the complex field-tissue interactions for the inverse design of source current density related with an irregularly structured electromagnetic target field is proposed. A Huygens' equivalent surface is established as a bridge to combine the inverse and FDTD method. Distribution of the radiofrequency (RF) magnetic field on the Huygens' equivalent surface is obtained using the FDTD method by considering the complex field-tissue interactions within the human body model. The obtained magnetic field distributed on the Huygens' equivalent surface is regarded as the next target. The current density on the designated source surface is derived using the inverse method. The homogeneity of target magnetic field and specific energy absorption rate are calculated to verify the proposed method.

Relation between Silver Nanoparticle Formation Rate and Antioxidant Capacity of Aqueous Plant Leaf Extracts

Directory of Open Access Journals (Sweden)

Azat Akbal

2016-01-01

Full Text Available Correlation between the antioxidant capacity and silver nanoparticle formation rates of pomegranate (Punica granatum, quince (Cydonia oblonga, chestnut (Castanea sativa, fig (Ficus carica, walnut (Juglans cinerea, black mulberry (Morus nigra, and white mulberry (Morus alba leaf extracts is investigated at a fixed illumination. Silver nanoparticles formed in all plant leaf extracts possess round shapes with average particle size of 15 to 25 nm, whereas corresponding surface plasmon resonance peak wavelengths vary between 422 nm and 451 nm. Cupric reducing antioxidant capacity technique is used as a reference method to determine total antioxidant capacity of the plant leaf extracts. Integrated absorbance over the plasmon resonance peaks exhibits better linear relation with antioxidant capacities of various plant leaf extracts compared to peak absorbance values, with correlation coefficient values of 0.9333 and 0.7221, respectively.

Reexamining the Dissolution of Spent Fuel: A Comparison of Different Methods for Calculating Rates

International Nuclear Information System (INIS)

Hanson, Brady D.; Stout, Ray B.

2004-01-01

Dissolution rates for spent fuel have typically been reported in terms of a rate normalized to the surface area of the specimen. Recent evidence has shown that neither the geometric surface area nor that measured with BET accurately predicts the effective surface area of spent fuel. Dissolution rates calculated from results obtained by flowthrough tests were reexamined comparing the cumulative releases and surface area normalized rates. While initial surface area is important for comparison of different rates, it appears that normalizing to the surface area introduces unnecessary uncertainty compared to using cumulative or fractional release rates. Discrepancies in past data analyses are mitigated using this alternative method

The impact of varicella vaccination on varicella-related hospitalization rates: global data review.

Science.gov (United States)

Hirose, Maki; Gilio, Alfredo Elias; Ferronato, Angela Esposito; Ragazzi, Selma Lopes Betta

2016-09-01

to describe the impact of varicella vaccination on varicella-related hospitalization rates in countries that implemented universal vaccination against the disease. we identified countries that implemented universal vaccination against varicella at the http://apps.who.int/immunization_monitoring/globalsummary/schedules site of the World Health Organization and selected articles in Pubmed describing the changes (pre/post-vaccination) in the varicella-related hospitalization rates in these countries, using the Keywords "varicella", "vaccination/vaccine" and "children" (or) "hospitalization". Publications in English published between January 1995 and May 2015 were included. 24 countries with universal vaccination against varicella and 28 articles describing the impact of the vaccine on varicella-associated hospitalizations rates in seven countries were identified. The US had 81.4% -99.2% reduction in hospitalization rates in children younger than four years after 6-14 years after the onset of universal vaccination (1995), with vaccination coverage of 90%; Uruguay: 94% decrease (children aged 1-4 years) in six years, vaccination coverage of 90%; Canada: 93% decrease (age 1-4 years) in 10 years, coverage of 93%; Germany: 62.4% decrease (age 1-4 years) in 8 years, coverage of 78.2%; Australia: 76.8% decrease (age 1-4 years) in 5 years, coverage of 90%; Spain: 83.5% decrease (age <5 years) in four years, coverage of 77.2% and Italy 69.7% -73.8% decrease (general population), coverage of 60%-95%. The publications showed variations in the percentage of decrease in varicella-related hospitalization rates after universal vaccination in the assessed countries; the results probably depend on the time since the implementation of universal vaccination, differences in the studied age group, hospital admission criteria, vaccination coverage and strategy, which does not allow direct comparison between data. Copyright © 2016 Sociedade de Pediatria de São Paulo. Publicado por

The impact of varicella vaccination on varicella-related hospitalization rates: global data review

Directory of Open Access Journals (Sweden)

Maki Hirose

Full Text Available Abstract Objective: To describe the impact of varicella vaccination on varicella-related hospitalization rates in countries that implemented universal vaccination against the disease. Data source: We identified countries that implemented universal vaccination against varicella at the http://apps.who.int/immunization_monitoring/globalsummary/schedules site of the World Health Organization and selected articles in Pubmed describing the changes (pre/post-vaccination in the varicella-related hospitalization rates in these countries, using the Keywords "varicella", "vaccination/vaccine" and "children" (or "hospitalization". Publications in English published between January 1995 and May 2015 were included. Data synthesis: 24 countries with universal vaccination against varicella and 28 articles describing the impact of the vaccine on varicella-associated hospitalizations rates in seven countries were identified. The US had 81.4%–99.2% reduction in hospitalization rates in children younger than four years, 6–14 years after the onset of universal vaccination (1995, with vaccination coverage of 90%; Uruguay: 94% decrease (children aged 1–4 years in six years, vaccination coverage of 90%; Canada: 93% decrease (age 1–4 years in 10 years, coverage of 93%; Germany: 62.4% decrease (age 1–4 years in 8 years, coverage of 78.2%; Australia: 76.8% decrease (age 1–4 years in 5 years, coverage of 90%; Spain: 83.5% decrease (age <5 years in four years, coverage of 77.2% and Italy 69.7%–73.8% decrease (general population, coverage of 60%–95%. Conclusions: The publications showed variations in the percentage of decrease in varicella-related hospitalization rates after universal vaccination in the assessed countries; the results probably depend on the time since the implementation of universal vaccination, differences in the studied age group, hospital admission criteria, vaccination coverage and strategy, which does not allow direct comparison between

Multi-rate cubature Kalman filter based data fusion method with residual compensation to adapt to sampling rate discrepancy in attitude measurement system.

Science.gov (United States)

Guo, Xiaoting; Sun, Changku; Wang, Peng

2017-08-01

This paper investigates the multi-rate inertial and vision data fusion problem in nonlinear attitude measurement systems, where the sampling rate of the inertial sensor is much faster than that of the vision sensor. To fully exploit the high frequency inertial data and obtain favorable fusion results, a multi-rate CKF (Cubature Kalman Filter) algorithm with estimated residual compensation is proposed in order to adapt to the problem of sampling rate discrepancy. During inter-sampling of slow observation data, observation noise can be regarded as infinite. The Kalman gain is unknown and approaches zero. The residual is also unknown. Therefore, the filter estimated state cannot be compensated. To obtain compensation at these moments, state error and residual formulas are modified when compared with the observation data available moments. Self-propagation equation of the state error is established to propagate the quantity from the moments with observation to the moments without observation. Besides, a multiplicative adjustment factor is introduced as Kalman gain, which acts on the residual. Then the filter estimated state can be compensated even when there are no visual observation data. The proposed method is tested and verified in a practical setup. Compared with multi-rate CKF without residual compensation and single-rate CKF, a significant improvement is obtained on attitude measurement by using the proposed multi-rate CKF with inter-sampling residual compensation. The experiment results with superior precision and reliability show the effectiveness of the proposed method.

THE EVOLUTION OF CURRENCY RELATIONS IN THE LIGHT OF MAJOR EXCHANGE RATE ADJUSTMENT THEORIES

Directory of Open Access Journals (Sweden)

Sergiy TKACH

2014-07-01

Full Text Available This paper examines the impact of major exchange rate adjustment theories on the global monetary system. The reasons of the previous organization forms of monetary relations collapse at the global level are defined. The main achievements and failures of major exchange rate theories are described.

Provider-Initiated Patient Satisfaction Reporting Yields Improved Physician Ratings Relative to Online Rating Websites.

Science.gov (United States)

Ricciardi, Benjamin F; Waddell, Brad S; Nodzo, Scott R; Lange, Jeffrey; Nocon, Allina A; Amundsen, Spencer; Tarity, T David; McLawhorn, Alexander S

2017-09-01

Recently, providers have begun to publicly report the results of patient satisfaction surveys from their practices. However, these outcomes have never been compared with the findings of commercial online physician rating websites. The goals of the current study were to (1) compare overall patient satisfaction ratings for orthopedic surgeons derived from provider-based third-party surveys with existing commercial physician rating websites and (2) determine the association between patient ratings and provider characteristics. The authors identified 12 institutions that provided publicly available patient satisfaction outcomes derived from third-party surveys for their orthopedic surgeons as of August 2016. Orthopedic surgeons at these institutions were eligible for inclusion (N=340 surgeons). Provider characteristics were recorded from publicly available data. Four high-traffic commercial online physician rating websites were identified: Healthgrades.com, UCompareHealthCare.com, Vitals.com, and RateMDs.com. For each surgeon, overall ratings (on a scale of 1-5), total number of ratings, and percentage of negative ratings were compared between provider-initiated internal ratings and each commercial online website. Associations between baseline factors and overall physician ratings and negative ratings were assessed. Provider-initiated internal patient satisfaction ratings showed a greater number of overall patient ratings, higher overall patient satisfaction ratings, and a lower percentage of negative comments compared with commercial online physician rating websites. A greater number of years in practice had a weak association with lower internal ratings, and an academic practice setting and a location in the Northeast were protective factors for negative physician ratings. Compared with commercial online physician rating websites, provider-initiated patient satisfaction ratings of orthopedic surgeons appear to be more favorable, with greater numbers of responses

ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference Manual

Energy Technology Data Exchange (ETDEWEB)

Goel, Supriya [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-05-01

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1- 2010 (Standard 90.1-2010).The PRM is used for rating the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users of the PRM. It should be noted that this document is created independently from ASHRAE and SSPC 90.1 and is not sanctioned nor approved by either of those entities . Potential users of this manual include energy modelers, software developers and implementers of “beyond code” energy programs. Energy modelers using ASHRAE Standard 90.1-2010 for beyond code programs can use this document as a reference manual for interpreting requirements of the Performance Rating method. Software developers, developing tools for automated creation of the baseline model can use this reference manual as a guideline for developing the rules for the baseline model.

Application of the two-dose-rate method for general recombination correction for liquid ionization chambers in continuous beams

International Nuclear Information System (INIS)

Andersson, Jonas; Toelli, Heikki

2011-01-01

A method to correct for the general recombination losses for liquid ionization chambers in continuous beams has been developed. The proposed method has been derived from Greening's theory for continuous beams and is based on measuring the signal from a liquid ionization chamber and an air filled monitor ionization chamber at two different dose rates. The method has been tested with two plane parallel liquid ionization chambers in a continuous radiation x-ray beam with a tube voltage of 120 kV and with dose rates between 2 and 13 Gy min -1 . The liquids used as sensitive media in the chambers were isooctane (C 8 H 18 ) and tetramethylsilane (Si(CH 3 ) 4 ). The general recombination effect was studied using chamber polarizing voltages of 100, 300, 500, 700 and 900 V for both liquids. The relative standard deviation of the results for the collection efficiency with respect to general recombination was found to be a maximum of 0.7% for isooctane and 2.4% for tetramethylsilane. The results are in excellent agreement with Greening's theory for collection efficiencies over 90%. The measured and corrected signals from the liquid ionization chambers used in this work are in very good agreement with the air filled monitor chamber with respect to signal to dose linearity.

Assessing the optimized precision of the aircraft mass balance method for measurement of urban greenhouse gas emission rates through averaging

Directory of Open Access Journals (Sweden)

Alexie M. F. Heimburger

2017-06-01

Full Text Available To effectively address climate change, aggressive mitigation policies need to be implemented to reduce greenhouse gas emissions. Anthropogenic carbon emissions are mostly generated from urban environments, where human activities are spatially concentrated. Improvements in uncertainty determinations and precision of measurement techniques are critical to permit accurate and precise tracking of emissions changes relative to the reduction targets. As part of the INFLUX project, we quantified carbon dioxide (CO2, carbon monoxide (CO and methane (CH4 emission rates for the city of Indianapolis by averaging results from nine aircraft-based mass balance experiments performed in November-December 2014. Our goal was to assess the achievable precision of the aircraft-based mass balance method through averaging, assuming constant CO2, CH4 and CO emissions during a three-week field campaign in late fall. The averaging method leads to an emission rate of 14,600 mol/s for CO2, assumed to be largely fossil-derived for this period of the year, and 108 mol/s for CO. The relative standard error of the mean is 17% and 16%, for CO2 and CO, respectively, at the 95% confidence level (CL, i.e. a more than 2-fold improvement from the previous estimate of ~40% for single-flight measurements for Indianapolis. For CH4, the averaged emission rate is 67 mol/s, while the standard error of the mean at 95% CL is large, i.e. ±60%. Given the results for CO2 and CO for the same flight data, we conclude that this much larger scatter in the observed CH4 emission rate is most likely due to variability of CH4 emissions, suggesting that the assumption of constant daily emissions is not correct for CH4 sources. This work shows that repeated measurements using aircraft-based mass balance methods can yield sufficient precision of the mean to inform emissions reduction efforts by detecting changes over time in urban emissions.

Social network extraction based on Web: 1. Related superficial methods

Science.gov (United States)

Khairuddin Matyuso Nasution, Mahyuddin

2018-01-01

Often the nature of something affects methods to resolve the related issues about it. Likewise, methods to extract social networks from the Web, but involve the structured data types differently. This paper reveals several methods of social network extraction from the same sources that is Web: the basic superficial method, the underlying superficial method, the description superficial method, and the related superficial methods. In complexity we derive the inequalities between methods and so are their computations. In this case, we find that different results from the same tools make the difference from the more complex to the simpler: Extraction of social network by involving co-occurrence is more complex than using occurrences.

Charged-particle thermonuclear reaction rates: I. Monte Carlo method and statistical distributions

International Nuclear Information System (INIS)

Longland, R.; Iliadis, C.; Champagne, A.E.; Newton, J.R.; Ugalde, C.; Coc, A.; Fitzgerald, R.

2010-01-01

A method based on Monte Carlo techniques is presented for evaluating thermonuclear reaction rates. We begin by reviewing commonly applied procedures and point out that reaction rates that have been reported up to now in the literature have no rigorous statistical meaning. Subsequently, we associate each nuclear physics quantity entering in the calculation of reaction rates with a specific probability density function, including Gaussian, lognormal and chi-squared distributions. Based on these probability density functions the total reaction rate is randomly sampled many times until the required statistical precision is achieved. This procedure results in a median (Monte Carlo) rate which agrees under certain conditions with the commonly reported recommended 'classical' rate. In addition, we present at each temperature a low rate and a high rate, corresponding to the 0.16 and 0.84 quantiles of the cumulative reaction rate distribution. These quantities are in general different from the statistically meaningless 'minimum' (or 'lower limit') and 'maximum' (or 'upper limit') reaction rates which are commonly reported. Furthermore, we approximate the output reaction rate probability density function by a lognormal distribution and present, at each temperature, the lognormal parameters μ and σ. The values of these quantities will be crucial for future Monte Carlo nucleosynthesis studies. Our new reaction rates, appropriate for bare nuclei in the laboratory, are tabulated in the second paper of this issue (Paper II). The nuclear physics input used to derive our reaction rates is presented in the third paper of this issue (Paper III). In the fourth paper of this issue (Paper IV) we compare our new reaction rates to previous results.

Effects of Context and Relative Rank on Mate Choice and Affiliation Ratings

Directory of Open Access Journals (Sweden)

P. Lynne Honey

2009-07-01

Full Text Available Female dominance has not often been studied as a factor in mate choice and other social interactions. When it has been examined, there have been a number of conflicting findings. The present study was designed to clarify interpretations of a study conducted by Brown and Lewis (2004 that found that men prefer subordinate women in a workplace context. We presented participants with information about the relative rank of physically attractive targets, in two very different contexts (work-related and recreational. We found that the context in which rank cues are presented has an impact on affiliation ratings, but that cues of rank do not affect mate choice ratings. Future studies of effects of dominance must take into account the context in which they are presented, and recognize that rank may not be a sufficient indicator of dominance for the purpose of mate choice by both men and women.

Evaluation and comparison of estimation methods for failure rates and probabilities

Energy Technology Data Exchange (ETDEWEB)

Vaurio, Jussi K. [Fortum Power and Heat Oy, P.O. Box 23, 07901 Loviisa (Finland)]. E-mail: jussi.vaurio@fortum.com; Jaenkaelae, Kalle E. [Fortum Nuclear Services, P.O. Box 10, 00048 Fortum (Finland)

2006-02-01

An updated parametric robust empirical Bayes (PREB) estimation methodology is presented as an alternative to several two-stage Bayesian methods used to assimilate failure data from multiple units or plants. PREB is based on prior-moment matching and avoids multi-dimensional numerical integrations. The PREB method is presented for failure-truncated and time-truncated data. Erlangian and Poisson likelihoods with gamma prior are used for failure rate estimation, and Binomial data with beta prior are used for failure probability per demand estimation. Combined models and assessment uncertainties are accounted for. One objective is to compare several methods with numerical examples and show that PREB works as well if not better than the alternative more complex methods, especially in demanding problems of small samples, identical data and zero failures. False claims and misconceptions are straightened out, and practical applications in risk studies are presented.

Random breath testing in Queensland and Western Australia: examination of how the random breath testing rate influences alcohol related traffic crash rates.

Science.gov (United States)

Ferris, Jason; Mazerolle, Lorraine; King, Mark; Bates, Lyndel; Bennett, Sarah; Devaney, Madonna

2013-11-01

In this paper we explore the relationship between monthly random breath testing (RBT) rates (per 1000 licensed drivers) and alcohol-related traffic crash (ARTC) rates over time, across two Australian states: Queensland and Western Australia. We analyse the RBT, ARTC and licensed driver rates across 12 years; however, due to administrative restrictions, we model ARTC rates against RBT rates for the period July 2004 to June 2009. The Queensland data reveals that the monthly ARTC rate is almost flat over the five year period. Based on the results of the analysis, an average of 5.5 ARTCs per 100,000 licensed drivers are observed across the study period. For the same period, the monthly rate of RBTs per 1000 licensed drivers is observed to be decreasing across the study with the results of the analysis revealing no significant variations in the data. The comparison between Western Australia and Queensland shows that Queensland's ARTC monthly percent change (MPC) is 0.014 compared to the MPC of 0.47 for Western Australia. While Queensland maintains a relatively flat ARTC rate, the ARTC rate in Western Australia is increasing. Our analysis reveals an inverse relationship between ARTC RBT rates, that for every 10% increase in the percentage of RBTs to licensed driver there is a 0.15 decrease in the rate of ARTCs per 100,000 licenced drivers. Moreover, in Western Australia, if the 2011 ratio of 1:2 (RBTs to annual number of licensed drivers) were to double to a ratio of 1:1, we estimate the number of monthly ARTCs would reduce by approximately 15. Based on these findings we believe that as the number of RBTs conducted increases the number of drivers willing to risk being detected for drinking driving decreases, because the perceived risk of being detected is considered greater. This is turn results in the number of ARTCs diminishing. The results of this study provide an important evidence base for policy decisions for RBT operations. Copyright © 2013 Elsevier Ltd. All

Calculation method for gamma-dose rates from spherical puffs

International Nuclear Information System (INIS)

Thykier-Nielsen, S.; Deme, S.; Lang, E.

1993-05-01

The Lagrangian puff-models are widely used for calculation of the dispersion of atmospheric releases. Basic output from such models are concentrations of material in the air and on the ground. The most simple method for calculation of the gamma dose from the concentration of airborne activity is based on semi-infinite cloud model. This method is however only applicable for points far away from the release point. The exact calculation of the cloud dose using the volume integral requires significant computer time. The volume integral for the gamma dose could be approximated by using the semi-infinite cloud model combined with correction factors. This type of calculation procedure is very fast, but usually the accuracy is poor due to the fact that the same correction factors are used for all isotopes. The authors describe a more elaborate correction method. This method uses precalculated values of the gamma-dose rate as a function of the puff dispersion parameter (δ p ) and the distance from the puff centre for four energy groups. The release of energy for each radionuclide in each energy group has been calculated and tabulated. Based on these tables and a suitable interpolation procedure the calculation of gamma doses takes very short time and is almost independent of the number of radionuclides. (au) (7 tabs., 7 ills., 12 refs.)

Increased incidence rate of trauma- and stressor-related disorders in Denmark following the Breivik attacks in Norway

DEFF Research Database (Denmark)

Hansen, Bertel Teilfeldt; Dinesen, Peter T; Østergaard, Søren D

2017-01-01

BACKGROUND: On 22 July 2011, Anders Breivik killed 77 adults and children in Norway. Having recently documented increases in the incidence of trauma- and stressor-related disorders in Denmark after the 9/11 attacks, we hypothesized that the Breivik attacks-due to their geographic proximity......-would be followed by even larger increases in Denmark. METHODS: Using population-based data from the Danish Psychiatric Central Research Register (1995-2012), we conducted an intervention analysis of the change in the incidence of trauma- and stressor-related disorders after the Breivik attacks. RESULTS......: The incidence rate increased by 16% over the following 1½ years after the Breivik attacks, corresponding to 2736 additional cases. In comparison, 9/11 was followed by a 4% increase. We also present evidence of a subsequent surge in incidence stimulated by media attention. CONCLUSION: This study bolsters...

Validity and extension of the SCS-CN method for computing infiltration and rainfall-excess rates

Science.gov (United States)

Mishra, Surendra Kumar; Singh, Vijay P.

2004-12-01

A criterion is developed for determining the validity of the Soil Conservation Service curve number (SCS-CN) method. According to this criterion, the existing SCS-CN method is found to be applicable when the potential maximum retention, S, is less than or equal to twice the total rainfall amount. The criterion is tested using published data of two watersheds. Separating the steady infiltration from capillary infiltration, the method is extended for predicting infiltration and rainfall-excess rates. The extended SCS-CN method is tested using 55 sets of laboratory infiltration data on soils varying from Plainfield sand to Yolo light clay, and the computed and observed infiltration and rainfall-excess rates are found to be in good agreement.

Waste tank ventilation rates measured with a tracer gas method

International Nuclear Information System (INIS)

Huckaby, J.L.; Evans, J.C.; Sklarew, D.S.; Mitroshkov, A.V.

1998-08-01

Passive ventilation with the atmosphere is used to prevent accumulation of waste gases and vapors in the headspaces of 132 of the 177 high-level radioactive waste Tanks at the Hanford Site in Southeastern Washington State. Measurements of the passive ventilation rates are needed for the resolution of two key safety issues associated with the rates of flammable gas production and accumulation and the rates at which organic salt-nitrate salt mixtures dry out. Direct measurement of passive ventilation rates using mass flow meters is not feasible because ventilation occurs va multiple pathways to the atmosphere (i.e., via the filtered breather riser and unsealed tank risers and pits), as well as via underground connections to other tanks, junction boxes, and inactive ventilation systems. The tracer gas method discussed in this report provides a direct measurement of the rate at which gases are removed by ventilation and an indirect measurement of the ventilation rate. The tracer gas behaves as a surrogate of the waste-generated gases, but it is only diminished via ventilation, whereas the waste gases are continuously released by the waste and may be subject to depletion mechanisms other than ventilation. The fiscal year 1998 tracer studies provide new evidence that significant exchange of air occurs between tanks via the underground cascade pipes. Most of the single-shell waste tanks are connected via 7.6-cm diameter cascade pipes to one or two adjacent tanks. Tracer gas studies of the Tank U-102/U-103 system indicated that the ventilation occurring via the cascade line could be a significant fraction of the total ventilation. In this two-tank cascade, air evidently flowed from Tank U-103 to Tank U-102 for a time and then was observed to flow from Tank U-102 to Tank U-103

Assessment of interchangeability rate between 2 methods of measurements: An example with a cardiac output comparison study.

Science.gov (United States)

Lorne, Emmanuel; Diouf, Momar; de Wilde, Robert B P; Fischer, Marc-Olivier

2018-02-01

The Bland-Altman (BA) and percentage error (PE) methods have been previously described to assess the agreement between 2 methods of medical or laboratory measurements. This type of approach raises several problems: the BA methodology constitutes a subjective approach to interchangeability, whereas the PE approach does not take into account the distribution of values over a range. We describe a new methodology that defines an interchangeability rate between 2 methods of measurement and cutoff values that determine the range of interchangeable values. We used a simulated data and a previously published data set to demonstrate the concept of the method. The interchangeability rate of 5 different cardiac output (CO) pulse contour techniques (Wesseling method, LiDCO, PiCCO, Hemac method, and Modelflow) was calculated, in comparison with the reference pulmonary artery thermodilution CO using our new method. In our example, Modelflow with a good interchangeability rate of 93% and a cutoff value of 4.8 L min, was found to be interchangeable with the thermodilution method for >95% of measurements. Modelflow had a higher interchangeability rate compared to Hemac (93% vs 86%; P = .022) or other monitors (Wesseling cZ = 76%, LiDCO = 73%, and PiCCO = 62%; P < .0001). Simulated data and reanalysis of a data set comparing 5 CO monitors against thermodilution CO showed that, depending on the repeatability of the reference method, the interchangeability rate combined with a cutoff value could be used to define the range of values over which interchangeability remains acceptable.

Pleural liquid clearance rate measured in awake sheep by the volume of dilution method

International Nuclear Information System (INIS)

Broaddus, V.C.; Wiener-Kronish, J.P.; Berthiaume, Y.; Staub, N.C.

1986-01-01

The authors reported 24h clearance of mock pleural effusions measured terminally in sheep. To measure effusion volume at different times in the same sheep, they injected 111 In-transferrin and measured its dilution. In 5 sheep with effusions of known sizes, the method was accurate to +/-10%. In 5 awake sheep, the authors injected 10 ml/kg of a 1% protein solution via a non-penetrating rib capsule. At 6h, the authors measured the volume by the dilution method and at 24h by direct recovery. The clearance rate in each animal was constant at 2.9-6.0%/h (average 4.8 +/- 1.3%/h). This new method gives a reliable two point clearance rate and requires fewer animals

Experiments to Evaluate and Implement Passive Tracer Gas Methods to Measure Ventilation Rates in Homes

Energy Technology Data Exchange (ETDEWEB)

Lunden, Melissa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heredia, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cohn, Sebastian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dickerhoff, Darryl [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Noris, Federico [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Logue, Jennifer [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-10-01

This report documents experiments performed in three homes to assess the methodology used to determine air exchange rates using passive tracer techniques. The experiments used four different tracer gases emitted simultaneously but implemented with different spatial coverage in the home. Two different tracer gas sampling methods were used. The results characterize the factors of the execution and analysis of the passive tracer technique that affect the uncertainty in the calculated air exchange rates. These factors include uncertainties in tracer gas emission rates, differences in measured concentrations for different tracer gases, temporal and spatial variability of the concentrations, the comparison between different gas sampling methods, and the effect of different ventilation conditions.

Covariance methodology applied to 35S disintegration rate measurements by the CIEMAT/NIST method

International Nuclear Information System (INIS)

Koskinas, M.F.; Nascimento, T.S.; Yamazaki, I.M.; Dias, M.S.

2014-01-01

The Nuclear Metrology Laboratory (LMN) at IPEN is carrying out measurements in a LSC (Liquid Scintillation Counting system), applying the CIEMAT/NIST method. In this context 35 S is an important radionuclide for medical applications and it is difficult to be standardized by other primary methods due to low beta ray energy. The CIEMAT/NIST is a standard technique used by most metrology laboratories in order to improve accuracy and speed up beta emitter standardization. The focus of the present work was to apply the covariance methodology for determining the overall uncertainty in the 35 S disintegration rate. All partial uncertainties involved in the measurements were considered, taking into account all possible correlations between each pair of them. - Highlights: ► 35 S disintegration rate measured in Liquid Scintillator system using CIEMAT/NIST method. ► Covariance methodology applied to the overall uncertainty in the 35 S disintegration rate. ► Monte Carlo simulation was applied to determine 35 S activity in the 4πβ(PC)-γ coincidence system

Environmental dose rate assessment of ITER using the Monte Carlo method

Directory of Open Access Journals (Sweden)

Karimian Alireza

2014-01-01

Full Text Available Exposure to radiation is one of the main sources of risk to staff employed in reactor facilities. The staff of a tokamak is exposed to a wide range of neutrons and photons around the tokamak hall. The International Thermonuclear Experimental Reactor (ITER is a nuclear fusion engineering project and the most advanced experimental tokamak in the world. From the radiobiological point of view, ITER dose rates assessment is particularly important. The aim of this study is the assessment of the amount of radiation in ITER during its normal operation in a radial direction from the plasma chamber to the tokamak hall. To achieve this goal, the ITER system and its components were simulated by the Monte Carlo method using the MCNPX 2.6.0 code. Furthermore, the equivalent dose rates of some radiosensitive organs of the human body were calculated by using the medical internal radiation dose phantom. Our study is based on the deuterium-tritium plasma burning by 14.1 MeV neutron production and also photon radiation due to neutron activation. As our results show, the total equivalent dose rate on the outside of the bioshield wall of the tokamak hall is about 1 mSv per year, which is less than the annual occupational dose rate limit during the normal operation of ITER. Also, equivalent dose rates of radiosensitive organs have shown that the maximum dose rate belongs to the kidney. The data may help calculate how long the staff can stay in such an environment, before the equivalent dose rates reach the whole-body dose limits.

On one method of realization of commutation relation algebra

International Nuclear Information System (INIS)

Sveshnikov, K.A.

1983-01-01

Method for constructing the commulation relation representations based on the purely algebraic construction of joined algebraic representation with specially selected composition law has been suggested9 Purely combinatorial construction realizing commulation relations representation has been obtained proceeding from formal equivalence of operatopr action on vector and adding a simbol to a sequences of symbols. The above method practically has the structure of calculating algorithm, which assigns some rule of ''word'' formation of an initial set of ''letters''. In other words, a computer language with definite relations between words (an analogy between quantum mechanics and computer linguistics has been applied)

Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods

Science.gov (United States)

Majidi, Omid; Jahazi, Mohammad; Bombardier, Nicolas; Samuel, Ehab

2017-10-01

The strain rate sensitivity index, m-value, is being applied as a common tool to evaluate the impact of the strain rate on the viscoplastic behaviour of materials. The m-value, as a constant number, has been frequently taken into consideration for modeling material behaviour in the numerical simulation of superplastic forming processes. However, the impact of the testing variables on the measured m-values has not been investigated comprehensively. In this study, the m-value for a superplastic grade of an aluminum alloy (i.e., AA5083) has been investigated. The conditions and the parameters that influence the strain rate sensitivity for the material are compared with three different testing methods, i.e., monotonic uniaxial tension test, strain rate jump test and stress relaxation test. All tests were conducted at elevated temperature (470°C) and at strain rates up to 0.1 s-1. The results show that the m-value is not constant and is highly dependent on the applied strain rate, strain level and testing method.

Increasing recruitment rates in an inpatient clinical research study using quality improvement methods.

Science.gov (United States)

Sauers, Hadley S; Beck, Andrew F; Kahn, Robert S; Simmons, Jeffrey M

2014-11-01

One important benefit of successful patient recruitment is increased generalizability of findings. We sought to optimize enrollment of children admitted with asthma as part of a population-based, prospective, observational cohort study with the goal of enrolling at least 60% of all eligible and staffed patients. Quality improvement methods were used to improve cohort recruitment. Weekly meetings with study staff and study leadership were held to plan and discuss how to maximize recruitment rates. Significant initial variability in recruitment success prompted the team to use small-scale tests of change to increase recruitment numbers. A number of tests were trialed, focusing primarily on reducing patient refusals and improving recruitment process efficiency. Recruitment rates were calculated by dividing eligible by enrolled patients and displayed using annotated Shewhart control charts. Control charts were used to illustrate week-to-week variability while also enabling differentiation of common-cause and special-cause variation. The study enrolled 774 patients, representing 54% of all eligible and 59% of those eligible for whom staff were available to enroll. Our mean weekly recruitment rate increased from 55% during the first 3 months of the study to a statistically significant sustained rate of 61%. This was sustained given numerous obstacles, such as departing and hiring of staff and adding a second recruitment location. Implementing quality improvement methods within a larger research study led to an increase in the rate of recruitment as well as the stability in recruitment rates from week-to-week. Copyright © 2014 by the American Academy of Pediatrics.

Metallic stent implantation in patients with iliac artery occlusion: long-term patency rate and factors related to recurrence

Energy Technology Data Exchange (ETDEWEB)

Chung, Seok Kyun; Kim, Jae Kyu; Yoon, Woong; Kim, Jeong; Park, Jin Gyoon; Kang, Heoung Keun; Choi, Soo JinNa [Chonnam National University Hospital School of Medicine, Gwangju (Korea, Republic of)

2003-09-01

To determine the long-term patency rate in 68 patients with iliac artery occlusion who underwent metallic stent implantation, and to analyze the factors related to recurrence. Sixty-eight patients with occlusive disease of the iliac artery underwent implantation of a self-expandable metallic stent. The clinical symptoms were intermittent claudication (n=48), resting pain (n=11), and gangrene (n=9). Stent patency was determined by follow-up angiography and color Doppler imaging, and the cumulative patency rate using the Kaplan-Meier method. Cox's proportional hazard model was used to analyse recurrence-related factors involving clinical symptoms (Fontaine stage), risk factors, and anatomical factors such as lesion location, length, and the development of collaterals. The duration of follow-up varied from 1 day to 73 months (mean, 23.8 months). Arterial occlusion recurred in 16 of 68 patients (23.5%), and the cumulative patency rate was as follows: 95.4% at one month, 93.2% at six months, 80.1% at one year, 73.2% at two years, 68.9% at three years, and 62% at five years. According to a statistical analysis of risk factors, the recurrence (p=0.04) than in those without it, but in patients who smoked, hypertension, DM, and previous cerebrovascular disease were not statistically significant. With regard to anatomical factors, the recurrent rate for lesions involving the external iliac artery was 6.5 times higher (p=0.02) than for those involving the common iliac artery. Variations in the fontaine stage were not statistically significant indicators of recurrence. The recurrence rate after implantation of an iliac artery stent is higher in patients with heart disease than in those without it, and higher for occlusive lesions involving the external iliac artery than for those of the common iliac artery.

Metallic stent implantation in patients with iliac artery occlusion: long-term patency rate and factors related to recurrence

International Nuclear Information System (INIS)

Chung, Seok Kyun; Kim, Jae Kyu; Yoon, Woong; Kim, Jeong; Park, Jin Gyoon; Kang, Heoung Keun; Choi, Soo JinNa

2003-01-01

To determine the long-term patency rate in 68 patients with iliac artery occlusion who underwent metallic stent implantation, and to analyze the factors related to recurrence. Sixty-eight patients with occlusive disease of the iliac artery underwent implantation of a self-expandable metallic stent. The clinical symptoms were intermittent claudication (n=48), resting pain (n=11), and gangrene (n=9). Stent patency was determined by follow-up angiography and color Doppler imaging, and the cumulative patency rate using the Kaplan-Meier method. Cox's proportional hazard model was used to analyse recurrence-related factors involving clinical symptoms (Fontaine stage), risk factors, and anatomical factors such as lesion location, length, and the development of collaterals. The duration of follow-up varied from 1 day to 73 months (mean, 23.8 months). Arterial occlusion recurred in 16 of 68 patients (23.5%), and the cumulative patency rate was as follows: 95.4% at one month, 93.2% at six months, 80.1% at one year, 73.2% at two years, 68.9% at three years, and 62% at five years. According to a statistical analysis of risk factors, the recurrence (p=0.04) than in those without it, but in patients who smoked, hypertension, DM, and previous cerebrovascular disease were not statistically significant. With regard to anatomical factors, the recurrent rate for lesions involving the external iliac artery was 6.5 times higher (p=0.02) than for those involving the common iliac artery. Variations in the fontaine stage were not statistically significant indicators of recurrence. The recurrence rate after implantation of an iliac artery stent is higher in patients with heart disease than in those without it, and higher for occlusive lesions involving the external iliac artery than for those of the common iliac artery

Autonomic responses to heat pain: Heart rate, skin conductance, and their relation to verbal ratings and stimulus intensity.

Science.gov (United States)

Loggia, Marco L; Juneau, Mylène; Bushnell, M Catherine

2011-03-01

In human pain experiments, as well as in clinical settings, subjects are often asked to assess pain using scales (eg, numeric rating scales). Although most subjects have little difficulty in using these tools, some lack the necessary basic cognitive or motor skills (eg, paralyzed patients). Thus, the identification of appropriate nonverbal measures of pain has significant clinical relevance. In this study, we assessed heart rate (HR), skin conductance (SC), and verbal ratings in 39 healthy male subjects during the application of twelve 6-s heat stimuli of different intensities on the subjects' left forearm. Both HR and SC increased with more intense painful stimulation. However, HR but not SC, significantly correlated with pain ratings at the group level, suggesting that HR may be a better predictor of between-subject differences in pain than is SC. Conversely, changes in SC better predicted variations in ratings within a given individual, suggesting that it is more sensitive to relative changes in perception. The differences in findings derived from between- and within-subject analyses may result from greater within-subject variability in HR. We conclude that at least for male subjects, HR provides a better predictor of pain perception than SC, but that data should be averaged over several stimulus presentations to achieve consistent results. Nevertheless, variability among studies, and the indication that gender of both the subject and experimenter could influence autonomic results, lead us to advise caution in using autonomic or any other surrogate measures to infer pain in individuals who cannot adequately report their perception. Skin conductance is more sensitive to detect within-subject perceptual changes, but heart rate appears to better predict pain ratings at the group level. Copyright © 2010 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Estimation of turbulence dissipation rate by Large eddy PIV method in an agitated vessel

Directory of Open Access Journals (Sweden)

Kysela Bohuš

2015-01-01

Full Text Available The distribution of turbulent kinetic energy dissipation rate is important for design of mixing apparatuses in chemical industry. Generally used experimental methods of velocity measurements for measurement in complex geometries of an agitated vessel disallow measurement in resolution of small scales close to turbulence dissipation ones. Therefore, Particle image velocity (PIV measurement method improved by large eddy Ply approach was used. Large eddy PIV method is based on modeling of smallest eddies by a sub grid scale (SGS model. This method is similar to numerical calculations using Large Eddy Simulation (LES and the same SGS models are used. In this work the basic Smagorinsky model was employed and compared with power law approximation. Time resolved PIV data were processed by Large Eddy PIV approach and the obtained results of turbulent kinetic dissipation rate were compared in selected points for several operating conditions (impeller speed, operating liquid viscosity.

The Power of Implicit Social Relation in Rating Prediction of Social Recommender Systems.

Science.gov (United States)

Reafee, Waleed; Salim, Naomie; Khan, Atif

2016-01-01

The explosive growth of social networks in recent times has presented a powerful source of information to be utilized as an extra source for assisting in the social recommendation problems. The social recommendation methods that are based on probabilistic matrix factorization improved the recommendation accuracy and partly solved the cold-start and data sparsity problems. However, these methods only exploited the explicit social relations and almost completely ignored the implicit social relations. In this article, we firstly propose an algorithm to extract the implicit relation in the undirected graphs of social networks by exploiting the link prediction techniques. Furthermore, we propose a new probabilistic matrix factorization method to alleviate the data sparsity problem through incorporating explicit friendship and implicit friendship. We evaluate our proposed approach on two real datasets, Last.Fm and Douban. The experimental results show that our method performs much better than the state-of-the-art approaches, which indicates the importance of incorporating implicit social relations in the recommendation process to address the poor prediction accuracy.

Novel relations between the ergodic capacity and the average bit error rate

KAUST Repository

Yilmaz, Ferkan

2011-11-01

Ergodic capacity and average bit error rate have been widely used to compare the performance of different wireless communication systems. As such recent scientific research and studies revealed strong impact of designing and implementing wireless technologies based on these two performance indicators. However and to the best of our knowledge, the direct links between these two performance indicators have not been explicitly proposed in the literature so far. In this paper, we propose novel relations between the ergodic capacity and the average bit error rate of an overall communication system using binary modulation schemes for signaling with a limited bandwidth and operating over generalized fading channels. More specifically, we show that these two performance measures can be represented in terms of each other, without the need to know the exact end-to-end statistical characterization of the communication channel. We validate the correctness and accuracy of our newly proposed relations and illustrated their usefulness by considering some classical examples. © 2011 IEEE.

Quasi-static method and finite element method for obtaining the modifications of the spontaneous emission rate and energy level shift near a plasmonic nanostructure.

Science.gov (United States)

Zhao, Yun-Jin; Tian, Meng; Wang, Xiao-Yun; Yang, Hong; Zhao, Heping; Huang, Yong-Gang

2018-01-22

We provide numerical demonstrations of the applicability and accuracy of the quasi-static method and the finite-element method in the investigation of the modifications of the spontaneous emission rate and the energy level shift of an emitter placed near a silver-air interface or a silver nano-sphere. The analytical results are presented as a reference. Our calculations show that the finite element method is an accurate and general method. For frequency away from the radiative mode, the quasi-static method can be applied more effectively for calculating the energy level shift than the spontaneous emission rate. But for frequency around, there is a blue shift for both and this shift increases with the increasing of emitter-silver distance. Applying the theory to the nanosphere dimmer, we see similar phenomenon and find extremely large modifications of the spontaneous emission rate and energy level shift. These findings are instructive in the fields of quantum light-matter interactions.

Evaluation of trauma care using TRISS method: the role of adjusted misclassification rate and adjusted w-statistic

Directory of Open Access Journals (Sweden)

Bytyçi Cen I

2009-01-01

Full Text Available Abstract Background Major trauma is a leading cause of death worldwide. Evaluation of trauma care using Trauma Injury and Injury Severity Score (TRISS method is focused in trauma outcome (deaths and survivors. For testing TRISS method TRISS misclassification rate is used. Calculating w-statistic, as a difference between observed and TRISS expected survivors, we compare our trauma care results with the TRISS standard. Aim The aim of this study is to analyze interaction between misclassification rate and w-statistic and to adjust these parameters to be closer to the truth. Materials and methods Analysis of components of TRISS misclassification rate and w-statistic and actual trauma outcome. Results The component of false negative (FN (by TRISS method unexpected deaths has two parts: preventable (Pd and non-preventable (nonPd trauma deaths. Pd represents inappropriate trauma care of an institution; otherwise nonpreventable trauma deaths represents errors in TRISS method. Removing patients with preventable trauma deaths we get an Adjusted misclassification rate: (FP + FN - Pd/N or (b+c-Pd/N. Substracting nonPd from FN value in w-statistic formula we get an Adjusted w-statistic: [FP-(FN - nonPd]/N, respectively (FP-Pd/N, or (b-Pd/N. Conclusion Because adjusted formulas clean method from inappropriate trauma care, and clean trauma care from the methods error, TRISS adjusted misclassification rate and adjusted w-statistic gives more realistic results and may be used in researches of trauma outcome.

Cost-related model for transit rates in electric power distribution networks

International Nuclear Information System (INIS)

Collstrand, F.

1994-02-01

The planned deregulation of the swedish electrical power market will require a new structure of the electrical energy rates. In this report different models of transit rates are studied. The report includes studies of literature and a proposal to a rate structure and is made specifically for Malmoe Energi AB. The differences between various methods of calculating the transfer cost are illustrated. Further, the build-up of the tariff structure and its base elements are discussed. The costs are divided on different categories of costumers and shows the cost for each customer. The new regulations should apply simultaneously to all networks, independent of the voltage level. The transit cost should be based on a number of basic elements: capital cost, operation and maintenance, losses, measuring and administration. Capital cost and operation and maintenance should be charged as power fees, the loss cost as an energy fee and the measuring and administration cost as a fixed fee. The customer bill should be split into two parts, one for the transit cost and one for the energy usage. 15 refs., 37 tabs., 6 figs

Age-Related Differences in Speech Rate Perception Do Not Necessarily Entail Age-Related Differences in Speech Rate Use

Science.gov (United States)

Heffner, Christopher C.; Newman, Rochelle S.; Dilley, Laura C.; Idsardi, William J.

2015-01-01

Purpose: A new literature has suggested that speech rate can influence the parsing of words quite strongly in speech. The purpose of this study was to investigate differences between younger adults and older adults in the use of context speech rate in word segmentation, given that older adults perceive timing information differently from younger…

Evaluation of trauma care using TRISS method: the role of adjusted misclassification rate and adjusted w-statistic.

Science.gov (United States)

Llullaku, Sadik S; Hyseni, Nexhmi Sh; Bytyçi, Cen I; Rexhepi, Sylejman K

2009-01-15

Major trauma is a leading cause of death worldwide. Evaluation of trauma care using Trauma Injury and Injury Severity Score (TRISS) method is focused in trauma outcome (deaths and survivors). For testing TRISS method TRISS misclassification rate is used. Calculating w-statistic, as a difference between observed and TRISS expected survivors, we compare our trauma care results with the TRISS standard. The aim of this study is to analyze interaction between misclassification rate and w-statistic and to adjust these parameters to be closer to the truth. Analysis of components of TRISS misclassification rate and w-statistic and actual trauma outcome. The component of false negative (FN) (by TRISS method unexpected deaths) has two parts: preventable (Pd) and non-preventable (nonPd) trauma deaths. Pd represents inappropriate trauma care of an institution; otherwise nonpreventable trauma deaths represents errors in TRISS method. Removing patients with preventable trauma deaths we get an Adjusted misclassification rate: (FP + FN - Pd)/N or (b+c-Pd)/N. Substracting nonPd from FN value in w-statistic formula we get an Adjusted w-statistic: [FP-(FN - nonPd)]/N, respectively (FP-Pd)/N, or (b-Pd)/N). Because adjusted formulas clean method from inappropriate trauma care, and clean trauma care from the methods error, TRISS adjusted misclassification rate and adjusted w-statistic gives more realistic results and may be used in researches of trauma outcome.

Uninformed Decisions? The Online Presentation of Success and Failure of IVF and Related Methods on German IVF Centre Websites.

Science.gov (United States)

Kadi, S; Wiesing, U

2015-12-01

Background: Patients increasingly use the internet as a source of medical information before initial contact with doctors and during treatment. This applies to reproductive medicine too, where the internet could offer patients the chance to inform themselves in advance about specific procedures and the treatment centres that offer them. In this way it could potentially contribute to informed patient decision-making. This article analyses the web presence of German fertility treatment centres with respect to the provision of information on success rates, risks and side effects of treatment. Methods: Analysis of published success rates and information on the risks and adverse effects of IVF and related methods on German IVF centre websites. Results: Over half of the 129 centres (62.02 %) state a general success rate or their own institution's success rate. Less than a quarter (24.03 %) states their own institution's pregnancy rate and only 7.75 % their own birth rate. The published success rates are mostly pregnancy rates (pregnancy per embryo transfer), which by definition are higher than baby take-home-rates creating unrealistic expectations. Only 61 centres (47.29 %) mention risks and side effects of the procedures offered, and that in varying detail. Only 7 centres (5.43 %) provide information on the risk of psychological stress associated with unsuccessful fertility treatment. Conclusion: There is insufficient opportunity for women and their partners to inform themselves adequately on the internet in advance of treatment about available treatment methods, their success rates and associated risks/side effects; this applies both to specific facilities as well as to the procedures in general. In contrast to other countries, in Germany there is a lack of discussion on content requirements for fertility treatment facility websites.

Stigma, attitudes and help-seeking intentions for psychological problems in relation to regional suicide rates.

NARCIS (Netherlands)

Reynders, A.; Kerkhof, A.J.F.M.; Molenberghs, G.; Van Audenhove, C.

2016-01-01

In this ecological study, we investigated whether help-seeking related to stigma, intentions, and attitudes toward suicide are associated with the suicide rates of 20 regions within the Netherlands and Belgium. Significant associations were found between regional suicide rates and the intention to

Depth-related influences on biodegradation rates of phenanthrene in polluted marine sediments of Puget Sound, WA

Energy Technology Data Exchange (ETDEWEB)

Tang, Yinjie J. [Keasling Lab, Biophysics Division, Lawrence Berkeley National Laboratory, Biophysics Division, 717 Potter Street, Bldlg 977 MC 3224, Berkeley, CA 94720-3224 (United States)]. E-mail yjtang@lbl.gov; Carpenter, Shelly D. [School of Oceanography, University of Washington, Seattle, WA 98195 (United States); Deming, Jody W. [School of Oceanography, University of Washington, Seattle, WA 98195 (United States); Krieger-Brockett, Barbara [Department of Chemical Engineering, University of Washington, Seattle, WA 98195 (United States)

2006-11-15

A whole-core injection method was used to determine depth-related rates of microbial mineralization of {sup 14}C-phenanthrene added to both contaminated and clean marine sediments of Puget Sound, WA. For 26-day incubations under micro-aerobic conditions, conversions of {sup 14}C-phenanthrene to {sup 14}CO{sub 2} in heavily PAH-contaminated sediments from two sites in Eagle Harbor were much higher (up to 30%) than those in clean sediments from nearby Blakely Harbor (<3%). The averaged {sup 14}C-phenanthrene degradation rates in the surface sediment horizons (0-3 cm) were more rapid (2-3 times) than in the deeper sediment horizons examined (>6 cm), especially in the most PAH polluted EH9 site. Differences in mineralization were associated with properties of the sediments as a function of sediment depth, including grain-size distribution, PAH concentration, total organic matter and total bacterial abundance. When strictly anaerobic incubations (in N{sub 2}/H{sub 2}/CO{sub 2} atmosphere) were used, the phenanthrene biodegradation rates at all sediment depths were two times slower than under micro-aerobic conditions, with methanogenesis observed after 24 days. The main rate-limiting factor for phenanthrene degradation under anaerobic conditions appeared to be the availability of suitable electron acceptors. Addition of calcium sulfate enhanced the first order rate coefficient (k {sub 1} increased from 0.003 to 0.006 day{sup -1}), whereas addition of soluble nitrate, even at very low concentration (<0.5 mM), inhibited mineralization. Long-term storage of heavily polluted Eagle Harbor sediment as intact cores under micro-aerobic conditions also appeared to enhance anaerobic biodegradation rates (k {sub 1} up to 0.11 day{sup -1})

Nasal congestion in relation to low air exchange rate in schools. Evaluation by acoustic rhinometry.

Science.gov (United States)

Wålinder, R; Norbäck, D; Wieslander, G; Smedje, G; Erwall, C

1997-09-01

Upper airway symptoms are common, but there is little information available on clinical findings in relation to indoor air pollution. This pilot study was conducted to test whether increased levels of indoor air pollutants in schools may correlate to a swelling of the nasal mucosa. The assumption was made that the degree of swelling could be related to the degree of decongestive effect of xylometazoline, and measured by acoustic rhinometry. The study was performed among 15 subjects in a school with low air exchange rate (0.6 air changes/h) and 12 subjects in a school with high air exchange rate (5.2 air changes/h). Hygienic measurements were performed in both schools. Acoustic rhinometry was performed for each individual under standardized forms. Cross-sectional areas and volumes of the nasal cavity were measured before and after decongestion with xylometazoline hydrochloride. Absolute values of the minimal cross-sectional area were lower in the school with poor ventilation. The decongestive effect of xylometazoline was significantly higher in the school with low air exchange, when correction for the influence of age was made. A diminished decongestive effect was seen with increasing age. The exposure measurements showed that indoor concentrations of volatile organic compounds, bacteria and moulds were higher in the school with low ventilation. In conclusion, raised levels of indoor air pollutants due to inadequate ventilation in schools may affect the upper airways and cause a swelling of the nasal mucosa, and acoustic rhinometry could be a useful objective method to measure human nasal reactions to the indoor environment.

Do resident's leadership skills relate to ratings of technical skill?

Science.gov (United States)

Gannon, Samantha J; Law, Katherine E; Ray, Rebecca D; Nathwani, Jay N; DiMarco, Shannon M; D'Angelo, Anne-Lise D; Pugh, Carla M

2016-12-01

This study sought to compare general surgery research residents' survey information regarding self-efficacy ratings to their observed performance during a simulated small bowel repair. Their observed performance ratings were based on their leadership skills in directing their assistant. Participants were given 15 min to perform a bowel repair using bovine intestines with standardized injuries. Operative assistants were assigned to help assist with the repair. Before the procedure, participants were asked to rate their expected skills decay, task difficulty, and confidence in addressing the small bowel injury. Interactions were coded to identify the number of instructions given by the participants to the assistant during the repair. Statistical analyses assessed the relationship between the number of directional instructions and participants' perceptions self-efficacy measures. Directional instructions were defined as any dialog by the participant who guided the assistant to perform an action. Thirty-six residents (58.3% female) participated in the study. Participants who rated lower levels of decay in their intraoperative decision-making and small bowel repair skills were noted to use their assistant more by giving more instructions. Similarly, a higher number of instructions correlated with lower perceived difficulty in selecting the correct suture, suture pattern, and completing the entire surgical task. General surgery research residents' intraoperative leadership skills showed significant correlations to their perceptions of skill decay and task difficulty during a bowel repair. Evaluating resident's directional instructions may provide an additional individualized intraoperative assessment metric. Further evaluation relating to operative performance outcomes is warranted. Copyright © 2016 Elsevier Inc. All rights reserved.

Addition by Subtraction: The Relation Between Dropout Rates and School-Level Academic Achievement.

Science.gov (United States)

Glennie, Elizabeth; Bonneau, Kara; Vandellen, Michelle; Dodge, Kenneth A

2012-01-01

Efforts to improve student achievement should increase graduation rates. However, work investigating the effects of student-level accountability has consistently demonstrated that increases in the standards for high school graduation are correlated with increases in dropout rates. The most favored explanation for this finding is that high-stakes testing policies that mandate grade repetition and high school exit exams may be the tipping point for students who are already struggling academically. These extra demands may, in fact, push students out of school. This article examines two hypotheses regarding the relation between school-level accountability and dropout rates. The first posits that improvements in school performance lead to improved success for everyone. If school-level accountability systems improve a school for all students, then the proportion of students performing at grade level increases, and the dropout rate decreases. The second hypothesis posits that schools facing pressure to improve their overall accountability score may pursue this increase at the cost of other student outcomes, including dropout rate. Our approach focuses on the dynamic relation between school-level academic achievement and dropout rates over time-that is, between one year's achievement and the subsequent year's dropout rate, and vice versa. This article employs longitudinal data of records on all students in North Carolina public schools over an 8-year period. Analyses employ fixed-effects models clustering schools and districts within years and controls each year for school size, percentage of students who were free/reduced-price lunch eligible, percentage of students who are ethnic minorities, and locale. This study finds partial evidence that improvements in school-level academic performance will lead to improvements (i.e., decreases) in school-level dropout rates. Schools with improved performance saw decreased dropout rates following these successes. However, we find

Improvement of life prediction accuracy by introduction of strain-rate effect into modified ductility exhaustion method

International Nuclear Information System (INIS)

Takahashi, Yukio

1994-01-01

It is important to use a reliable creep-fatigue damage evaluation method to prevent failures due to creep-fatigue damage accumulated during operation life in the structural design for fast breeder reactor plants. In this study, slow strain-rate fatigue tests were conducted for SUS316 steel for fast breeder application (316FR) and the improvement of creep-fatigue life estimation method was proposed based on test results. Main results can be summarized as follows: (1) In the slow strain-rate fatigue tests, life reduction caused by creep damage was observed as in the case of strain-hold creep-fatigue tests. (2) Strain-rate dependency of creep damage was introduced into the modified ductility exhaustion method previously proposed by the author. Good agreement of predicted lives with observed lives was achieved for SUS304 and 316FR steels with the method proposed here. (author)

[Heart rate variability as a method of assessing the autonomic nervous system in polycystic ovary syndrome].

Science.gov (United States)

de Sá, Joceline Cássia Ferezini; Costa, Eduardo Caldas; da Silva, Ester; Azevedo, George Dantas

2013-09-01

Polycystic ovary syndrome (PCOS) is an endocrine disorder associated with several cardiometabolic risk factors, such as central obesity, insulin resistance, type 2 diabetes, metabolic syndrome, and hypertension. These factors are associated with adrenergic overactivity, which is an important prognostic factor for the development of cardiovascular disorders. Given the common cardiometabolic disturbances occurring in PCOS women, over the last years studies have investigated the cardiac autonomic control of these patients, mainly based on heart rate variability (HRV). Thus, in this review, we will discuss the recent findings of the studies that investigated the HRV of women with PCOS, as well as noninvasive methods of analysis of autonomic control starting from basic indexes related to this methodology.

Engineering Mathematical Analysis Method for Productivity Rate in Linear Arrangement Serial Structure Automated Flow Assembly Line

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2015-01-01

Full Text Available Productivity rate (Q or production rate is one of the important indicator criteria for industrial engineer to improve the system and finish good output in production or assembly line. Mathematical and statistical analysis method is required to be applied for productivity rate in industry visual overviews of the failure factors and further improvement within the production line especially for automated flow line since it is complicated. Mathematical model of productivity rate in linear arrangement serial structure automated flow line with different failure rate and bottleneck machining time parameters becomes the basic model for this productivity analysis. This paper presents the engineering mathematical analysis method which is applied in an automotive company which possesses automated flow assembly line in final assembly line to produce motorcycle in Malaysia. DCAS engineering and mathematical analysis method that consists of four stages known as data collection, calculation and comparison, analysis, and sustainable improvement is used to analyze productivity in automated flow assembly line based on particular mathematical model. Variety of failure rate that causes loss of productivity and bottleneck machining time is shown specifically in mathematic figure and presents the sustainable solution for productivity improvement for this final assembly automated flow line.

Evolution of mitochondrial DNA and its relation to basal metabolic rate.

Science.gov (United States)

Feng, Ping; Zhao, Huabin; Lu, Xin

2015-08-01

Energy metabolism is essential for the survival of animals, which can be characterized by maximum metabolic rate (MMR) and basal metabolic rate (BMR). Because of the crucial roles of mitochondria in energy metabolism, mitochondrial DNA (mtDNA) has been subjected to stronger purifying selection in strongly locomotive than weakly locomotive birds and mammals. Although maximum locomotive speed (an indicator of MMR) showed a negative correlation with the evolutionary rate of mtDNA, it is unclear whether BMR has driven the evolution of mtDNA. Here, we take advantage of the large amount of mtDNA and BMR data in 106 mammals to test whether BMR has influenced the mtDNA evolution. Our results showed that, in addition to the locomotive speed, mammals with higher BMR have subjected to stronger purifying selection on mtDNA than did those with lower BMR. The evolution of mammalian mtDNA has been modified by two levels of energy metabolism, including MMR and BMR. Our study provides a more comprehensive view of mtDNA evolution in relation to energy metabolism.

Development of Copper Corrosion Products and Relation between Surface Appearance and Corrosion Rate

International Nuclear Information System (INIS)

Lan, Tran Thi Ngoc; Binh, Nguyen Thi Thanh; Tru, Nguyen Nhi; Yoshino, Tsujino; Yasuki, Maeda

2008-01-01

Copper was exposed unsheltered and sheltered in four humid tropical sites, representing urban, urban-industrial, urban-marine and rural environments. The corrosion rates and the sequence of corrosion product formation are presented and discussed in relation with climatic and atmospheric pollution parameters. Chemical compositions of corrosion products were found to depend on environments and duration of exposure. In all environments, cuprite was the predominating corrosion product that formed first and continuously increased during the exposure. Among the sulphur-containing corrosion products, posnjakite and brochantite were more frequently found and the first formed earlier. Nantokite was the most common chlorine-containing products for most cases, except the high-chloride environment, where atacamite was detected instead. The corrosion rate of copper was well indicated by the colour of patina. The red-purple colour corresponded to the high corrosion rate and the greenish grey colour corresponded to the low corrosion rate. Corrosion rate of sheltered copper in urban-marine environment increased with the exposure time

Sample-interpolation timing: an optimized technique for the digital measurement of time of flight for γ rays and neutrons at relatively low sampling rates

International Nuclear Information System (INIS)

Aspinall, M D; Joyce, M J; Mackin, R O; Jarrah, Z; Boston, A J; Nolan, P J; Peyton, A J; Hawkes, N P

2009-01-01

A unique, digital time pick-off method, known as sample-interpolation timing (SIT) is described. This method demonstrates the possibility of improved timing resolution for the digital measurement of time of flight compared with digital replica-analogue time pick-off methods for signals sampled at relatively low rates. Three analogue timing methods have been replicated in the digital domain (leading-edge, crossover and constant-fraction timing) for pulse data sampled at 8 GSa s −1 . Events arising from the 7 Li(p, n) 7 Be reaction have been detected with an EJ-301 organic liquid scintillator and recorded with a fast digital sampling oscilloscope. Sample-interpolation timing was developed solely for the digital domain and thus performs more efficiently on digital signals compared with analogue time pick-off methods replicated digitally, especially for fast signals that are sampled at rates that current affordable and portable devices can achieve. Sample interpolation can be applied to any analogue timing method replicated digitally and thus also has the potential to exploit the generic capabilities of analogue techniques with the benefits of operating in the digital domain. A threshold in sampling rate with respect to the signal pulse width is observed beyond which further improvements in timing resolution are not attained. This advance is relevant to many applications in which time-of-flight measurement is essential

Cross-lagged relations between teacher and parent ratings of children's task avoidance and different literacy skills.

Science.gov (United States)

Georgiou, George K; Hirvonen, Riikka; Manolitsis, George; Nurmi, Jari-Erik

2017-09-01

Task avoidance is a significant predictor of literacy skills. However, it remains unclear whether the relation between the two is reciprocal and whether it is affected by the type of literacy outcome, who is rating children's task avoidance, and the children's gender. The purpose of this longitudinal study was to examine the cross-lagged relations between teacher and parent ratings of children's task avoidance and different literacy skills. One hundred and seventy-two Greek children (91 girls, 81 boys) were followed from Grade 1 to Grade 3. Children were assessed on reading accuracy, reading fluency, and spelling to dictation. Parents and teachers rated the children's task-avoidant behaviour. Results of structural equation modelling showed that the cross-lagged relations varied as a function of the literacy outcome, who rated the children's task avoidance, and children's gender. Earlier reading and spelling performance predicted subsequent parent-rated task avoidance, but parent-rated task avoidance did not predict subsequent reading and spelling performance (with the exception of spelling in Grade 3). Teacher-rated task avoidance and reading fluency/spelling had a reciprocal relationship over time. In addition, the effects of teacher-rated task avoidance on future spelling were significantly stronger in boys than in girls. This suggests that poor reading and spelling performance can lead to subsequent task avoidance in both classroom and home situations. The fact that task avoidance permeates across different learning environments is alarming and calls for joint action from both parents and teachers to mitigate its negative impact on learning. © 2017 The British Psychological Society.

A photocurrent compensation method of bipolar transistors under high dose rate radiation and its experimental research

International Nuclear Information System (INIS)

Yin Xuesong; Liu Zhongli; Li Chunji; Yu Fang

2005-01-01

Experiment using discrete bipolar transistors has been performed to verify the effect of the photocurrent compensation method. The theory of the dose rate effects of bipolar transistors and the photocurrent compensation method are introduced. The comparison between the response of hardened and unhardened circuits under high dose rate radiation is discussed. The experimental results show instructiveness to the hardness of bipolar integrated circuits under transient radiation. (authors)

The log mean heat transfer rate method of heat exchanger considering the influence of heat radiation

International Nuclear Information System (INIS)

Wong, K.-L.; Ke, M.-T.; Ku, S.-S.

2009-01-01

The log mean temperature difference (LMTD) method is conventionally used to calculate the total heat transfer rate of heat exchangers. Because the heat radiation equation contains the 4th order exponential of temperature which is very complicate in calculations, thus LMTD method neglects the influence of heat radiation. From the recent investigation of a circular duct in some practical situations, it is found that even in the situation of the temperature difference between outer duct surface and surrounding is low to 1 deg. C, the heat radiation effect can not be ignored in the situations of lower ambient convective heat coefficient and greater surface emissivities. In this investigation, the log mean heat transfer rate (LMHTR) method which considering the influence of heat radiation, is developed to calculate the total heat transfer rate of heat exchangers.

Performance efficiency of feed utilization, relative growth rate, and survival rate of common carp (Cyprinus carpio) through the addition of phytase in the feed

Science.gov (United States)

Rachmawati, D.; Samidjan, I.

2018-04-01

The purpose of this study was to determine the effect of adding phytase enzyme in the feed on digestibility of feed, efficiency of feed utilization, relative growth rate and survival rate of Common carp (Cyprinus carpio). Fish samples in this research were Common carp with an average - weight of 3.34 ± 0,16 g/fish. The treatments were adding the phytase enzyme in the feed with the different level of doses. Those were A (0 U kg-1 feed), B (500 U kg-1 feed), C (1.000 U kg-1 feed g) and D (1.500 U kg-1 feed). Observation was conducted on digestibility of protein (ADCP), digestibility of phosphor (ADCF), efficiency of feed utilization (EFU), relative growth rate (RGR), protein efficiency ratio (PER), feed conversion ratio (FCR), survival rate (SR) and water quality parameters. The results show that the addition of phytase enzyme significantly (P0.05) affected on SR of common carp. Based on results, it was concluded that optimum doses of phytase enzyme feed in terms of digestibility of feed, efficiency utilization of Feed and growth rate of Common carp ranges from 943 to 1100 U kg-1 feed

Relations between Perceived Competence, Importance Ratings, and Self-Worth among African American School-Age Children

Science.gov (United States)

Grier, Leslie K.

2013-01-01

The purpose of this research was to investigate how domain-specific importance ratings affect relations between perceived competence and self-worth among African American school-age children. Importance ratings have been found to affect the strength of the relationship between perceived competence and self-worth and have implications for…

Machine cost analysis using the traditional machine-rate method and ChargeOut!

Science.gov (United States)

E. M. (Ted) Bilek

2009-01-01

Forestry operations require ever more use of expensive capital equipment. Mechanization is frequently necessary to perform cost-effective and safe operations. Increased capital should mean more sophisticated capital costing methodologies. However the machine rate method, which is the costing methodology most frequently used, dates back to 1942. CHARGEOUT!, a recently...

On the Relation between Tax Rates and Evasion in a Multi-period Economy

OpenAIRE

Jordi Caball?Author-Email:; Judith Panad?

2001-01-01

We extend the basic tax evasion model to a multi-period economy exhibiting sustained growth. When individuals conceal part of their true income from the tax authority, they face the risk of being audited and hence of paying the corresponding fine. Both taxes and fines determine individual saving and the rate of capital accumulation. In this context we show that the sign of the relation between the level of the tax rate and the amount of evaded income is the same as that obtained in static set...

On the relation between tax rates and evasion in a multi-period economy

OpenAIRE

Caballé, Jordi

2006-01-01

We extend the basic tax evasion model to a multi-period economy exhibiting sustained growth. When individuals conceal part of their true income from the tax authority, they face the risk of being audited and hence of paying the corresponding fine. Both taxes and fines determine individual saving and the rate of capital accumulation. In this context we show that the sign of the relation between the level of the tax rate and the amount of evaded income is the same as that obtained in static set...

Survival and reproductive rate of mites in relation to resistance of their barn swallow hosts.

Science.gov (United States)

Møller, A P

2000-08-01

Parasite resistance may act via a number of different mechanisms that regulate or control the survival and the reproductive rate of parasites. Observations and experiments were used to test for effects of host resistance on parasite survival and rate of reproduction. Natural levels of infestation of barn swallow Hirundo rustica nests by the tropical fowl mite Ornithonyssus bursa were positively related to brood size, inversely related to the length of the outermost tail feathers of male nest owners (a secondary sexual character) and affected by time of reproduction by the host. A mite inoculation experiment, in which 50 adult mites were introduced into nests during the laying period of the host, was used to test for differential survival and reproduction of mites as a function of host resistance. The relationship between survival and reproduction of parasites, male tail length and host resistance was investigated. There was a negative relationship between mite numbers per nest after fledging of nestlings and male tail length. This relationship was mainly caused by a reduction in the number of mites in the first and second nymph stage with increasing tail length of male hosts, implying a reduction in rate of reproduction of mites. The proportion of mites that had recently fed was inversely related to tail length of male hosts. The proportion of nymph stages was positively related to the proportion of mites that had recently had a blood meal. Parasite resistance of barn swallows to the tropical fowl mite thus appeared to act through increased mortality rate of adult and nymph stages of mites, and through reduced reproductive rates of mites on resistant hosts. This is the first study demonstating a direct relationship between fitness components of a parasite and the expression of a secondary sexual character of a host.

Semiempirical method of determining flow coefficients for pitot rake mass flow rate measurements

Science.gov (United States)

Trefny, C. J.

1985-01-01

Flow coefficients applicable to area-weighted pitot rake mass flow rate measurements are presented for fully developed, turbulent flow in an annulus. A turbulent velocity profile is generated semiempirically for a given annulus hub-to-tip radius ratio and integrated numerically to determine the ideal mass flow rate. The calculated velocities at each probe location are then summed, and the flow rate as indicated by the rake is obtained. The flow coefficient to be used with the particular rake geometry is subsequently obtained by dividing the ideal flow rate by the rake-indicated flow rate. Flow coefficients ranged from 0.903 for one probe placed at a radius dividing two equal areas to 0.984 for a 10-probe area-weighted rake. Flow coefficients were not a strong function of annulus hub-to-tip radius ratio for rakes with three or more probes. The semiempirical method used to generate the turbulent velocity profiles is described in detail.

Judges' perception of candidates' organization and communication, in relation to oral certification examination ratings.

Science.gov (United States)

Houston, James E; Myford, Carol M

2009-11-01

To determine (1) whether judges differed in the levels of severity they exercised when rating candidates' performance in an oral certification exam, (2) to what extent candidates' clinical competence ratings were related to their organization/communication ratings, and (3) to what extent clinical competence ratings could predict organization/communication ratings. Six hundred eighty-four physicians participated in a medical specialty board's 2002 oral examination. Ninety-nine senior members of the medical specialty served as judges, rating candidates' performances. Candidates' clinical competence ratings were analyzed using multifaceted Rasch measurement to investigate judge severity. A Pearson correlation was calculated to examine the relationship between ratings of clinical competence and organization/communication. Logistic regression was used to determine to what extent clinical competence ratings predicted organization/communication ratings. There were about three statistically distinct strata of judge severity; judges were not interchangeable. There was a moderately strong relationship between the two sets of candidate ratings. Higher clinical competence ratings were associated with an organization/communication rating of acceptable, whereas lower clinical competence ratings were associated with an organization/communication rating of unacceptable. The judges' clinical competence ratings correctly predicted 61.9% of the acceptable and 88.3% of the unacceptable organization/communication ratings. Overall, the clinical competence ratings correctly predicted 80% of the organization/communication ratings. The close association between the two sets of ratings was possibly due to a "halo" effect. Several explanations for this relationship were explored, and the authors considered the implications for their understanding of how judges carry out this complex rating task.

Development in self-rated health among older people as determinant of social relations

DEFF Research Database (Denmark)

Avlund, Kirsten; Modvig, Jens Simon; Due, Pernille

2004-01-01

The purpose of this study was to analyse whether development in self-rated health (SRH) over four years was associated with the structure of and satisfaction with social relations, at four and eight years follow-up, among elderly women and men....

Classical Wigner method with an effective quantum force: application to reaction rates.

Science.gov (United States)

Poulsen, Jens Aage; Li, Huaqing; Nyman, Gunnar

2009-07-14

We construct an effective "quantum force" to be used in the classical molecular dynamics part of the classical Wigner method when determining correlation functions. The quantum force is obtained by estimating the most important short time separation of the Feynman paths that enter into the expression for the correlation function. The evaluation of the force is then as easy as classical potential energy evaluations. The ideas are tested on three reaction rate problems. The resulting transmission coefficients are in much better agreement with accurate results than transmission coefficients from the ordinary classical Wigner method.

Calculation method for gamma dose rates from Gaussian puffs

Energy Technology Data Exchange (ETDEWEB)

Thykier-Nielsen, S; Deme, S; Lang, E

1995-06-01

The Lagrangian puff models are widely used for calculation of the dispersion of releases to the atmosphere. Basic output from such models is concentration of material in the air and on the ground. The most simple method for calculation of the gamma dose from the concentration of airborne activity is based on the semi-infinite cloud model. This method is however only applicable for puffs with large dispersion parameters, i.e. for receptors far away from the release point. The exact calculation of the cloud dose using volume integral requires large computer time usually exceeding what is available for real time calculations. The volume integral for gamma doses could be approximated by using the semi-infinite cloud model combined with correction factors. This type of calculation procedure is very fast, but usually the accuracy is poor because only a few of the relevant parameters are considered. A multi-parameter method for calculation of gamma doses is described here. This method uses precalculated values of the gamma dose rates as a function of E{sub {gamma}}, {sigma}{sub y}, the asymmetry factor - {sigma}{sub y}/{sigma}{sub z}, the height of puff center - H and the distance from puff center R{sub xy}. To accelerate the calculations the release energy, for each significant radionuclide in each energy group, has been calculated and tabulated. Based on the precalculated values and suitable interpolation procedure the calculation of gamma doses needs only short computing time and it is almost independent of the number of radionuclides considered. (au) 2 tabs., 15 ills., 12 refs.

Calculation method for gamma dose rates from Gaussian puffs

International Nuclear Information System (INIS)

Thykier-Nielsen, S.; Deme, S.; Lang, E.

1995-06-01

The Lagrangian puff models are widely used for calculation of the dispersion of releases to the atmosphere. Basic output from such models is concentration of material in the air and on the ground. The most simple method for calculation of the gamma dose from the concentration of airborne activity is based on the semi-infinite cloud model. This method is however only applicable for puffs with large dispersion parameters, i.e. for receptors far away from the release point. The exact calculation of the cloud dose using volume integral requires large computer time usually exceeding what is available for real time calculations. The volume integral for gamma doses could be approximated by using the semi-infinite cloud model combined with correction factors. This type of calculation procedure is very fast, but usually the accuracy is poor because only a few of the relevant parameters are considered. A multi-parameter method for calculation of gamma doses is described here. This method uses precalculated values of the gamma dose rates as a function of E γ , σ y , the asymmetry factor - σ y /σ z , the height of puff center - H and the distance from puff center R xy . To accelerate the calculations the release energy, for each significant radionuclide in each energy group, has been calculated and tabulated. Based on the precalculated values and suitable interpolation procedure the calculation of gamma doses needs only short computing time and it is almost independent of the number of radionuclides considered. (au) 2 tabs., 15 ills., 12 refs

A method for automatically extracting infectious disease-related primers and probes from the literature

Directory of Open Access Journals (Sweden)

Pérez-Rey David

2010-08-01

Full Text Available Abstract Background Primer and probe sequences are the main components of nucleic acid-based detection systems. Biologists use primers and probes for different tasks, some related to the diagnosis and prescription of infectious diseases. The biological literature is the main information source for empirically validated primer and probe sequences. Therefore, it is becoming increasingly important for researchers to navigate this important information. In this paper, we present a four-phase method for extracting and annotating primer/probe sequences from the literature. These phases are: (1 convert each document into a tree of paper sections, (2 detect the candidate sequences using a set of finite state machine-based recognizers, (3 refine problem sequences using a rule-based expert system, and (4 annotate the extracted sequences with their related organism/gene information. Results We tested our approach using a test set composed of 297 manuscripts. The extracted sequences and their organism/gene annotations were manually evaluated by a panel of molecular biologists. The results of the evaluation show that our approach is suitable for automatically extracting DNA sequences, achieving precision/recall rates of 97.98% and 95.77%, respectively. In addition, 76.66% of the detected sequences were correctly annotated with their organism name. The system also provided correct gene-related information for 46.18% of the sequences assigned a correct organism name. Conclusions We believe that the proposed method can facilitate routine tasks for biomedical researchers using molecular methods to diagnose and prescribe different infectious diseases. In addition, the proposed method can be expanded to detect and extract other biological sequences from the literature. The extracted information can also be used to readily update available primer/probe databases or to create new databases from scratch.

Balancing related methods for minimal realization of periodic systems

OpenAIRE

Varga, A.

1999-01-01

We propose balancing related numerically reliable methods to compute minimal realizations of linear periodic systems with time-varying dimensions. The first method belongs to the family of square-root methods with guaranteed enhanced computational accuracy and can be used to compute balanced minimal order realizations. An alternative balancing-free square-root method has the advantage of a potentially better numerical accuracy in case of poorly scaled original systems. The key numerical co...

Integrating Expressive Methods in a Relational-Psychotherapy

Directory of Open Access Journals (Sweden)

Richard G. Erskine

2011-06-01

Full Text Available Therapeutic Involvement is an integral part of all effective psychotherapy.This article is written to illustrate the concept of Therapeutic Involvement in working within a therapeutic relationship – within the transference -- and with active expressive and experiential methods to resolve traumatic experiences, relational disturbances and life shaping decisions.

Addition by Subtraction: The Relation Between Dropout Rates and School-Level Academic Achievement

Science.gov (United States)

GLENNIE, ELIZABETH; BONNEAU, KARA; VANDELLEN, MICHELLE; DODGE, KENNETH A.

2013-01-01

Background/Context Efforts to improve student achievement should increase graduation rates. However, work investigating the effects of student-level accountability has consistently demonstrated that increases in the standards for high school graduation are correlated with increases in dropout rates. The most favored explanation for this finding is that high-stakes testing policies that mandate grade repetition and high school exit exams may be the tipping point for students who are already struggling academically. These extra demands may, in fact, push students out of school. Purpose/Objective/Focus This article examines two hypotheses regarding the relation between school-level accountability and dropout rates. The first posits that improvements in school performance lead to improved success for everyone. If school-level accountability systems improve a school for all students, then the proportion of students performing at grade level increases, and the dropout rate decreases. The second hypothesis posits that schools facing pressure to improve their overall accountability score may pursue this increase at the cost of other student outcomes, including dropout rate. Research Design Our approach focuses on the dynamic relation between school-level academic achievement and dropout rates over time—that is, between one year’s achievement and the subsequent year’s dropout rate, and vice versa. This article employs longitudinal data of records on all students in North Carolina public schools over an 8-year period. Analyses employ fixed-effects models clustering schools and districts within years and controls each year for school size, percentage of students who were free/reduced-price lunch eligible, percentage of students who are ethnic minorities, and locale. Findings/Results This study finds partial evidence that improvements in school-level academic performance will lead to improvements (i.e., decreases) in school-level dropout rates. Schools with improved

CONVERSION OF FOREIGN COMPANIES ACCOUNTS IN THE ACCOUNT CONSOLIDATION PROCESS IN ROMANIA UNDER THE CLOSING RATE METHOD

Directory of Open Access Journals (Sweden)

Mariana BANUTA

2017-12-01

Full Text Available The article approaches a topical theme of debate both in the professional academic environment and especially in the economic practice, i.e. the manner of converting the accounts of foreign companies in the account consolidation process, in Romania. We analyse the conditions of applying the accounting regulations related to the consolidation of accounts, in Romania, focusing on the manner of converting the accounts of the foreign companies according to Order no. 1802/2014 approving the accounting regulations on individual annual financial statements and consolidated annual financial statements and to the International Financial Reporting Standards (IFRS. We focused on the presentation of the practical method of applying the conversion of the accounts of the foreign companies according to the closing rate method, because irrespective of the accounting referential applied by the parent company for consolidation, this method occurs in the pre-consolidation stage, if the group leader has affiliates abroad, and the individual financial statements of the companies in the consolidation perimeter have different disclosure currencies.

Reference satellite selection method for GNSS high-precision relative positioning

Directory of Open Access Journals (Sweden)

Xiao Gao

2017-03-01

Full Text Available Selecting the optimal reference satellite is an important component of high-precision relative positioning because the reference satellite directly influences the strength of the normal equation. The reference satellite selection methods based on elevation and positional dilution of precision (PDOP value were compared. Results show that all the above methods cannot select the optimal reference satellite. We introduce condition number of the design matrix in the reference satellite selection method to improve structure of the normal equation, because condition number can indicate the ill condition of the normal equation. The experimental results show that the new method can improve positioning accuracy and reliability in precise relative positioning.

A GPS Satellite Clock Offset Prediction Method Based on Fitting Clock Offset Rates Data

Directory of Open Access Journals (Sweden)

WANG Fuhong

2016-12-01

Full Text Available It is proposed that a satellite atomic clock offset prediction method based on fitting and modeling clock offset rates data. This method builds quadratic model or linear model combined with periodic terms to fit the time series of clock offset rates, and computes the model coefficients of trend with the best estimation. The clock offset precisely estimated at the initial prediction epoch is directly adopted to calculate the model coefficient of constant. The clock offsets in the rapid ephemeris (IGR provided by IGS are used as modeling data sets to perform certain experiments for different types of GPS satellite clocks. The results show that the clock prediction accuracies of the proposed method for 3, 6, 12 and 24 h achieve 0.43, 0.58, 0.90 and 1.47 ns respectively, which outperform the traditional prediction method based on fitting original clock offsets by 69.3%, 61.8%, 50.5% and 37.2%. Compared with the IGU real-time clock products provided by IGS, the prediction accuracies of the new method have improved about 15.7%, 23.7%, 27.4% and 34.4% respectively.

A fast and simple method to estimate relative, hyphal tensile-strength of filamentous fungi used to assess the effect of autophagy

DEFF Research Database (Denmark)

Quintanilla, Daniela; Chelius, Cynthia; Iambamrung, Sirasa

2018-01-01

Fungal hyphal strength is an important phenotype which can have a profound impact on bioprocess behavior. Until now, there is not an efficient method which allows its characterization. Currently available methods are very time consuming; thus, compromising their applicability in strain selection...... and process development. To overcome this issue, a method for fast and easy, statistically-verified quantification of relative hyphal tensile strength was developed. It involves off-line fragmentation in a high shear mixer followed by quantification of fragment size using laser diffraction. Particle size...... distribution (PSD) is determined, with analysis time on the order of minutes. Plots of PSD 90th percentile versus time allow estimation of the specific fragmentation rate. This novel method is demonstrated by estimating relative hyphal strength during growth in control conditions and rapamycin...

Bypass flow rate control method

International Nuclear Information System (INIS)

Kiyama, Yoichi.

1997-01-01

In a PWR type reactor, bypass flow rate is controlled by exchanging existent jetting hole plugs of a plurality of nozzles disposed to the upper end of incore structures in order to flow a portion of primary coolants as a bypass flow to the upper portion of the pressure vessel. Two kinds of exchange plugs, namely, a first plug and a second plug each having a jetting out hole of different diameter are used as exchange plugs. The first plug has the diameter as that of an existent plug and the second plug has a jetting out hole having larger diameter than that of the existent plug. Remained extent plugs are exchanged to a combination of the first and the second plugs without exchanging existent plugs having seizing with the nozzles, in which the number and the diameter of the jetting out holes of the second plugs are previously determined based on predetermined total bypass flow rate to be jetted from the entire plugs after exchange of plugs. (N.H.)

Client and clinician-rated characteristics of problem gamblers with and without history of gambling-related illegal behaviors.

Science.gov (United States)

Ellis, Jennifer D; Lister, Jamey J; Struble, Cara A; Cairncross, Molly; Carr, Meagan M; Ledgerwood, David M

2018-03-12

Individuals with gambling disorder are at an elevated risk for engaging in gambling-related illegal behaviors. The present study examined client (N = 88) and clinician ratings (N = 30) of client characteristics associated with a history of gambling-related illegal behaviors. We also examined client characteristics associated with history of arrest for a gambling-related crime. Gambling-related illegal behaviors and arrest were common (57.3% and 23.9%, respectively) in the present sample. Clients of younger age, and those with greater gambling-related financial consequences, lifetime alcohol problems, impulsivity, mood symptoms, and daily living role difficulties were more likely to report gambling-related illegal behaviors. Clients who had been arrested for a gambling-related crime were more likely to report daily living and role functioning difficulties and lifetime alcohol problems. Clinicians rated clients with a history of gambling-related illegal behaviors and/or gambling-related arrests as more impulsive, and clinicians also endorsed higher rates of treatment failure among these clients. Both client and clinician report suggested that clients with a history of illegal behaviors may have a variety of comorbid problems that may be a focus of clinical intervention. Copyright © 2018 Elsevier Ltd. All rights reserved.

Impact of seeding rate, seeding date, rate and method of phosphorus application in faba bean (Vicia faba L. minor in the absence of moisture stress

Directory of Open Access Journals (Sweden)

Turk M.A.

2002-01-01

Full Text Available Field experiments were conducted during the winter seasons of 1998-1999, 1999-2000 and 2000-2001 at the semi-arid region in north of Jordan, to study the effect of seeding dates (14 January, 28 January and 12 February, seeding rates (50, 75 and 100 plants per metre, phosphorus levels (0, 17.5, 35.0 and 52.5 kg P per ha and two methods of P placement (banding and broadcast. Seeding rate, seeding date, and rate of phosphorus had a significant effect on most of the measured traits and the yield determinates. Method of phosphorus application had only a significant effect on seed yield and seed weight per plant. In general high yields were obtained by early seeding (14 January, high seeding rate (100-plant per square metre, and P application (52.5 kg P per ha drilled with the seed after cultivation (banded.

Efficient kinetic Monte Carlo method for reaction-diffusion problems with spatially varying annihilation rates

Science.gov (United States)

Schwarz, Karsten; Rieger, Heiko

2013-03-01

We present an efficient Monte Carlo method to simulate reaction-diffusion processes with spatially varying particle annihilation or transformation rates as it occurs for instance in the context of motor-driven intracellular transport. Like Green's function reaction dynamics and first-passage time methods, our algorithm avoids small diffusive hops by propagating sufficiently distant particles in large hops to the boundaries of protective domains. Since for spatially varying annihilation or transformation rates the single particle diffusion propagator is not known analytically, we present an algorithm that generates efficiently either particle displacements or annihilations with the correct statistics, as we prove rigorously. The numerical efficiency of the algorithm is demonstrated with an illustrative example.

Job performance ratings : The relative importance of mental ability, conscientiousness, and career adaptability

NARCIS (Netherlands)

Ohme, Melanie; Zacher, Hannes

According to career construction theory, continuous adaptation to the work environment is crucial to achieve work and career success. In this study, we examined the relative importance of career adaptability for job performance ratings using an experimental policy-capturing design. Employees (N =

ANSI/ASHRAE/IES Standard 90.1-2016 Performance Rating Method Reference Manual

Energy Technology Data Exchange (ETDEWEB)

Goel, Supriya [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eley, Charles [Eley and Associates, Hobe Sound, FL (United States)

2017-09-29

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1-2016 (Standard 90.1-2016). The PRM can be used to demonstrate compliance with the standard and to rate the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. Use of the PRM for demonstrating compliance with Standard 90.1 is a new feature of the 2016 edition. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users of the PRM.

Dispersion relation and growth rate of a relativistic electron beam propagating through a Langmuir wave wiggler

Science.gov (United States)

Zirak, H.; Jafari, S.

2015-06-01

In this study, a theory of free-electron laser (FEL) with a Langmuir wave wiggler in the presence of an axial magnetic field has been presented. The small wavelength of the plasma wave (in the sub-mm range) allows obtaining higher frequency than conventional wiggler FELs. Electron trajectories have been obtained by solving the equations of motion for a single electron. In addition, a fourth-order Runge-Kutta method has been used to simulate the electron trajectories. Employing a perturbation analysis, the dispersion relation for an electromagnetic and space-charge waves has been derived by solving the momentum transfer, continuity, and wave equations. Numerical calculations show that the growth rate increases with increasing the e-beam energy and e-beam density, while it decreases with increasing the strength of the axial guide magnetic field.

Effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced on workdays and weekends.

Science.gov (United States)

Vahle-Hinz, Tim; Bamberg, Eva; Dettmers, Jan; Friedrich, Niklas; Keller, Monika

2014-04-01

The present study reports the lagged effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced during both workdays and weekends. Fifty employees participated in a diary study. Multilevel and regression analyses revealed a significant relationship between work stress measured at the end of a workday, work-related rumination measured during the evening, and restful sleep measured the following morning. Work stress, measured as the mean of 2 consecutive workdays, was substantially but not significantly related to restful sleep on weekends. Work stress was unrelated to nocturnal heart rate variability. Work-related rumination was related to restful sleep on weekends but not on workdays. Additionally, work-related rumination on weekends was positively related to nocturnal heart rate variability during the night between Saturday and Sunday. No mediation effects of work stress on restful sleep or nocturnal heart rate variability via work-related rumination were confirmed.

Effects of vasoactive intestinal polypeptide on heart rate in relation to vagal cardioacceleration in conscious dogs

NARCIS (Netherlands)

Roossien, A; Brunstig, J.R; Nijmeijer, A; Zaagsma, Hans; Zijlstra, W.G

Objective: The vagal cardiac accelerator (VCA) system takes part in the nervous control of the heart rate. In the present study we tried to adduce evidence that vasoactive intestinal polypeptide (VLP) contributes to vagally induced cardioacceleration. Methods: The effect of VIP on heart rate and

An alternative method for the estimation of sedimentation rates using radiometric measurements in an intertidal region (sw of spain)

Science.gov (United States)

Ligero, Rufino; Casas-Ruiz, Melquiades; Barrera, Manuel; Barbero, Luis

2010-05-01

The techniques for the direct measurement of the sedimentation rate are reliable but slow and imprecise, given that the time intervals of measurement cannot be very long. Consequently it is an extremely laborious task to obtain a representative map of the sedimentation rates and such maps are available for very few zones. However, for most environmental studies, it is very important to know the sedimentation rates. The high degree of accuracy of the gamma spectrometric techniques together with the application of the model describes in this work, has allowed the determination of the sedimentation rates in a wide spatial area such of the Bay of Cadiz to be obtained with precision and consuming considerably less time in comparison to the traditional techniques. Even so, the experimental conditions required for the sample cores are fairly restrictive, and although the radiological method provides a quantitative advance in measurement, the experimental difficulty in the execution of the study is not greatly diminished. For this reason, a second model has been derived based on the measurement of the inventory, which offers economies in time and financial cost, and which allows the sedimentation rate in a region to be determined with satisfactory accuracy. Furthermore, it has been shown that the application of this model requires a precise determination of 137Cs inventories. The sedimentation rates estimated by the 137Cs inventory method ranged from 0.26 cm/year to 1.72 cm/year. The average value of the sedimentation rate obtained is 0.59 cm/year, and this rate has been compared with those resulting from the application of the 210Pb dating technique. A good agreement between the two procedures has been found. From the study carried out, it has been possible for the first time, to draw a map of sedimentation rates for this zone where numerous physical-chemical, oceanographic and ecological studies converge, since it is situated in a region of great environmental interest

Water vapor mass balance method for determining air infiltration rates in houses

Science.gov (United States)

David R. DeWalle; Gordon M. Heisler

1980-01-01

A water vapor mass balance technique that includes the use of common humidity-control equipment can be used to determine average air infiltration rates in buildings. Only measurements of the humidity inside and outside the home, the mass of vapor exchanged by a humidifier/dehumidifier, and the volume of interior air space are needed. This method gives results that...

Calculation method of rate and area of sedimentation, by non-conventional mathematical process of data treatment

International Nuclear Information System (INIS)

Cota, P.L.

1987-01-01

The used methods for calculating the rate and area of sedimentation are based in techniques of graphical resolution. The solution of the problem by a mathematical resolution, using computational methods, is more fast and more accuracy. The comparison between the results from this methods and the conventional method is shown. (E.G.) [pt

Collecting Information for Rating Global Assessment of Functioning (GAF): Sources of Information and Methods for Information Collection.

Science.gov (United States)

I H, Monrad Aas

2014-11-01

Global Assessment of Functioning (GAF) is an assessment instrument that is known worldwide. It is widely used for rating the severity of illness. Results from evaluations in psychiatry should characterize the patients. Rating of GAF is based on collected information. The aim of the study is to identify the factors involved in collecting information that is relevant for rating GAF, and gaps in knowledge where it is likely that further development would play a role for improved scoring. A literature search was conducted with a combination of thorough hand search and search in the bibliographic databases PubMed, PsycINFO, Google Scholar, and Campbell Collaboration Library of Systematic Reviews. Collection of information for rating GAF depends on two fundamental factors: the sources of information and the methods for information collection. Sources of information are patients, informants, health personnel, medical records, letters of referral and police records about violence and substance abuse. Methods for information collection include the many different types of interview - unstructured, semi-structured, structured, interviews for Axis I and II disorders, semistructured interviews for rating GAF, and interviews of informants - as well as instruments for rating symptoms and functioning, and observation. The different sources of information, and methods for collection, frequently result in inconsistencies in the information collected. The variation in collected information, and lack of a generally accepted algorithm for combining collected information, is likely to be important for rated GAF values, but there is a fundamental lack of knowledge about the degree of importance. Research to improve GAF has not reached a high level. Rated GAF values are likely to be influenced by both the sources of information used and the methods employed for information collection, but the lack of research-based information about these influences is fundamental. Further development of

How Well Can We Detect Lineage-Specific Diversification-Rate Shifts? A Simulation Study of Sequential AIC Methods.

Science.gov (United States)

May, Michael R; Moore, Brian R

2016-11-01

Evolutionary biologists have long been fascinated by the extreme differences in species numbers across branches of the Tree of Life. This has motivated the development of statistical methods for detecting shifts in the rate of lineage diversification across the branches of phylogenic trees. One of the most frequently used methods, MEDUSA, explores a set of diversification-rate models, where each model assigns branches of the phylogeny to a set of diversification-rate categories. Each model is first fit to the data, and the Akaike information criterion (AIC) is then used to identify the optimal diversification model. Surprisingly, the statistical behavior of this popular method is uncharacterized, which is a concern in light of: (1) the poor performance of the AIC as a means of choosing among models in other phylogenetic contexts; (2) the ad hoc algorithm used to visit diversification models, and; (3) errors that we reveal in the likelihood function used to fit diversification models to the phylogenetic data. Here, we perform an extensive simulation study demonstrating that MEDUSA (1) has a high false-discovery rate (on average, spurious diversification-rate shifts are identified [Formula: see text] of the time), and (2) provides biased estimates of diversification-rate parameters. Understanding the statistical behavior of MEDUSA is critical both to empirical researchers-in order to clarify whether these methods can make reliable inferences from empirical datasets-and to theoretical biologists-in order to clarify the specific problems that need to be solved in order to develop more reliable approaches for detecting shifts in the rate of lineage diversification. [Akaike information criterion; extinction; lineage-specific diversification rates; phylogenetic model selection; speciation.]. © The Author(s) 2016. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Method of measuring the mass flow rate of a substance entering a cocurrent fluid stream

International Nuclear Information System (INIS)

Cochran, H.D. Jr.

1978-01-01

An improved method of monitoring the mass flow rate of a substance entering a coherent fluid stream is described. The method very basically consists of heating equal sections of the fluid stream above and below the point of entry of the substance to be monitored, and measuring and comparing the resulting change in temperature of the sections. Advantage is taken of the difference in thermal characteristics of the fluid and the substance to be measured to correlate temperature differences in the sections above and below the substance feed point for providing an indication of the mass flow rate of the substance

The mass-metallicity-star formation rate relation under the STARLIGHT microscope

Science.gov (United States)

Schlickmann, M.; Vale Asari, N.; Cid Fernandes, R.; Stasińska, G.

2014-10-01

The correlation between stellar mass and gas-phase oxygen abundance (M-Z relation) has been known for decades. The slope and scatter of this trend is strongly dependent on galaxy evolution: Chemical enrichment in a galaxy is driven by its star formation history, which in turn depends on its secular evolution and interaction with other galaxies and intergalactic gas. In last couple of years, the M-Z relation has been studied as a function of a third parameter: the recent star formation rate (SFR) as calibrated by the Hα luminosity, which traces stars formed in the last 10 Myr. This mass-metallicity-SFR relation has been reported to be very tight. This result puts strong constraints on galaxy evolution models in low and high redshifts, informing which models of infall and outflow of gas are acceptable. We explore the mass-metallicity-SFR relation in light of the SDSS-STARLIGHT database put together by our group. We find that we recover similar results as the ones reported by authors who use the MPA/JHU catalogue. We also present some preliminary results exploring the mass-metallicity-SFR relation in a more detailed fashion: starlight recovers a galaxy's full star formation history, and not only its recent SFR.

Effects of test method and participant musical training on preference ratings of stimuli with different reverberation times.

Science.gov (United States)

Lawless, Martin S; Vigeant, Michelle C

2017-10-01

Selecting an appropriate listening test design for concert hall research depends on several factors, including listening test method and participant critical-listening experience. Although expert listeners afford more reliable data, their perceptions may not be broadly representative. The present paper contains two studies that examined the validity and reliability of the data obtained from two listening test methods, a successive and a comparative method, and two types of participants, musicians and non-musicians. Participants rated their overall preference of auralizations generated from eight concert hall conditions with a range of reverberation times (0.0-7.2 s). Study 1, with 34 participants, assessed the two methods. The comparative method yielded similar results and reliability as the successive method. Additionally, the comparative method was rated as less difficult and more preferable. For study 2, an additional 37 participants rated the stimuli using the comparative method only. An analysis of variance of the responses from both studies revealed that musicians are better than non-musicians at discerning their preferences across stimuli. This result was confirmed with a k-means clustering analysis on the entire dataset that revealed five preference groups. Four groups exhibited clear preferences to the stimuli, while the fifth group, predominantly comprising non-musicians, demonstrated no clear preference.

Methods of analysis speech rate: a pilot study.

Science.gov (United States)

Costa, Luanna Maria Oliveira; Martins-Reis, Vanessa de Oliveira; Celeste, Letícia Côrrea

2016-01-01

To describe the performance of fluent adults in different measures of speech rate. The study included 24 fluent adults, of both genders, speakers of Brazilian Portuguese, who were born and still living in the metropolitan region of Belo Horizonte, state of Minas Gerais, aged between 18 and 59 years. Participants were grouped by age: G1 (18-29 years), G2 (30-39 years), G3 (40-49 years), and G4 (50-59 years). The speech samples were obtained following the methodology of the Speech Fluency Assessment Protocol. In addition to the measures of speech rate proposed by the protocol (speech rate in words and syllables per minute), the rate of speech into phonemes per second and the articulation rate with and without the disfluencies were calculated. We used the nonparametric Friedman test and the Wilcoxon test for multiple comparisons. Groups were compared using the nonparametric Kruskal Wallis. The significance level was of 5%. There were significant differences between measures of speech rate involving syllables. The multiple comparisons showed that all the three measures were different. There was no effect of age for the studied measures. These findings corroborate previous studies. The inclusion of temporal acoustic measures such as speech rate in phonemes per second and articulation rates with and without disfluencies can be a complementary approach in the evaluation of speech rate.

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium

CERN Document Server

American Society for Testing and Materials. Philadelphia