Managing Contextual Complexity in an Experiential Learning Course: A Dynamic Systems Approach through the Identification of Turning Points in Students' Emotional Trajectories

Directory of Open Access Journals (Sweden)

Gloria Nogueiras

2017-05-01

Full Text Available This study adopts a dynamic systems approach to investigate how individuals successfully manage contextual complexity. To that end, we tracked individuals' emotional trajectories during a challenging training course, seeking qualitative changes–turning points—and we tested their relationship with the perceived complexity of the training. The research context was a 5-day higher education course based on process-oriented experiential learning, and the sample consisted of 17 students. The students used a five-point Likert scale to rate the intensity of 16 emotions and the complexity of the training on 8 measurement points. Monte Carlo permutation tests enabled to identify 30 turning points in the 272 emotional trajectories analyzed (17 students * 16 emotions each. 83% of the turning points indicated a change of pattern in the emotional trajectories that consisted of: (a increasingly intense positive emotions or (b decreasingly intense negative emotions. These turning points also coincided with particularly complex periods in the training as perceived by the participants (p = 0.003, and p = 0.001 respectively. The relationship between positively-trended turning points in the students' emotional trajectories and the complexity of the training may be interpreted as evidence of a successful management of the cognitive conflict arising from the clash between the students' prior ways of meaning-making and the challenging demands of the training. One of the strengths of this study is that it provides a relatively simple procedure for identifying turning points in developmental trajectories, which can be applied to various longitudinal experiences that are very common in educational and developmental contexts. Additionally, the findings contribute to sustaining that the assumption that complex contextual demands lead unfailingly to individuals' learning is incomplete. Instead, it is how individuals manage complexity which may or may not lead to

A Dynamic Model of the Environmental Kuznets Curve. Turning Point and Public Policy

Energy Technology Data Exchange (ETDEWEB)

Egli, H.; Steger, T.M. [CER-ETH Center of Economic Research at ETH Zurich, ZUE F 10, CH-8092 Zurich (Switzerland)

2007-01-15

We set up a simple dynamic macroeconomic model with (1) polluting consumption and a preference for a clean environment, (2) increasing returns in abatement giving rise to an EKC and (3) sustained growth resulting from a linear final-output technology. There are two sorts of market failures caused by external effects associated with consumption and environmental effort. The model is employed to investigate the determinants of the turning point and the cost effectiveness of different public policies aimed at a reduction of the environmental burden. Moreover, the model offers a potential explanation of an N-shaped pollution-income relation. It is shown that the model is compatible with most empirical regularities on economic growth and the environment.

Turning point or selection? The effect of rustication on subsequent health for the Chinese Cultural Revolution cohort.

Science.gov (United States)

Fan, Wen

2016-05-01

During the Chinese Cultural Revolution (1966-76), Chairman Mao sent 17 million urban youth to rural areas to be "reeducated." These "sent-down" youth spent years working alongside peasants, enduring inadequate diets, shelter and medical attention. What were the consequences for subsequent health? Was there a benefit to individuals in the leading or trailing edges of this cohort? Was this a fundamental turning point or were selection process at work? Drawing on the 1994 State and Life Chances in Urban China Survey, I find the health disadvantage at midlife is mostly borne by members of the trailing-edge sub-cohort who lived in the countryside for more than five years. Results from propensity-score analysis indicate a selection process: those who suffered most came from disadvantaged backgrounds. Life chances following the rusticates' return home, however, either do not differ from those who stayed in cities or do not relate to health, refuting the turning-point view, at least in terms of midlife health. Copyright © 2016 Elsevier Ltd. All rights reserved.

Local Scaling Properties and Market Turning Points at Prague Stock Exchange

Czech Academy of Sciences Publication Activity Database

Krištoufek, Ladislav

2010-01-01

Roč. 41, č. 6 (2010), s. 1001-1014 ISSN 0587-4254 R&D Projects: GA ČR GA402/09/0965; GA ČR GD402/09/H045 Grant - others:GA UK(CZ) 118310 Institutional research plan: CEZ:AV0Z10750506 Keywords : scaling * Hurst exponent * extreme events Subject RIV: AH - Economics Impact factor: 0.671, year: 2010 http://library.utia.cas.cz/separaty/2010/E/kristoufek-local scaling properties and market turning points at prague stock exchange.pdf

Influence of acute normobaric hypoxia on physiological variables and lactate turn point determination in trained men.

Science.gov (United States)

Ofner, Michael; Wonisch, Manfred; Frei, Mario; Tschakert, Gerhard; Domej, Wolfgang; Kröpfl, Julia M; Hofmann, Peter

2014-12-01

The goal of this study is to evaluate the response of physiological variables to acute normobaric hypoxia compared to normoxia and its influence on the lactate turn point determination according to the three-phase model of energy supply (Phase I: metabolically balanced at muscular level; Phase II: metabolically balanced at systemic level; Phase III: not metabolically balanced) during maximal incremental exercise. Ten physically active (VO2max 3.9 [0.49] l·min(-1)), healthy men (mean age [SD]: 25.3 [4.6] yrs.), participated in the study. All participants performed two maximal cycle ergometric exercise tests under normoxic as well as hypoxic conditions (FiO2 = 14%). Blood lactate concentration, heart rate, gas exchange data, and power output at maximum and the first and the second lactate turn point (LTP1, LTP2), the heart rate turn point (HRTP) and the first and the second ventilatory turn point (VETP1, VETP2) were determined. Since in normobaric hypoxia absolute power output (P) was reduced at all reference points (max: 314 / 274 W; LTP2: 218 / 184 W; LTP1: 110 / 96 W), as well as VO2max (max: 3.90 / 3.23 l·min(-1); LTP2: 2.90 / 2.43 l·min(-1); LTP1: 1.66 / 1.52 l·min(-1)), percentages of Pmax at LTP1, LTP2, HRTP and VETP1, VETP2 were almost identical for hypoxic as well as normoxic conditions. Heart rate was significantly reduced at Pmax in hypoxia (max: 190 / 185 bpm), but no significant differences were found at submaximal control points. Blood lactate concentration was not different at maximum, and all reference points in both conditions. Respiratory exchange ratio (RER) (max: 1.28 / 1.08; LTP2: 1.13 / 0.98) and ventilatory equivalents for O2 (max: 43.4 / 34.0; LTP2: 32.1 / 25.4) and CO2 (max: 34.1 / 31.6; LTP2: 29.1 / 26.1) were significantly higher at some reference points in hypoxia. Significant correlations were found between LTP1 and VETP1 (r = 0.778; p better the performance of the athletes the higher is the effect of hypoxiaThe HRTP and LTP2 are

77 FR 25131 - Turning Point Solar LLC: Notice of Finding of No Significant Impact

Science.gov (United States)

2012-04-27

... monocrystalline photovoltaic panels mounted on fixed solar racking equipment and the construction of access roads... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC: Notice of Finding of No... Environmental Assessment (EA) associated with a solar generation project. The EA was prepared in accordance with...

A Systematic Approach to Process Evaluation in the Central Oklahoma Turning Point (COTP) Partnership

Science.gov (United States)

Tolma, Eleni L.; Cheney, Marshall K.; Chrislip, David D.; Blankenship, Derek; Troup, Pam; Hann, Neil

2011-01-01

Formation is an important stage of partnership development. Purpose: To describe the systematic approach to process evaluation of a Turning Point initiative in central Oklahoma during the formation stage. The nine-month collaborative effort aimed to develop an action plan to promote health. Methods: A sound planning framework was used in the…

Revealing turning points in ecosystem functioning over the Northern Eurasian agricultural frontier.

Science.gov (United States)

Horion, Stéphanie; Prishchepov, Alexander V; Verbesselt, Jan; de Beurs, Kirsten; Tagesson, Torbern; Fensholt, Rasmus

2016-08-01

The collapse of the Soviet Union in 1991 has been a turning point in the World history that left a unique footprint on the Northern Eurasian ecosystems. Conducting large scale mapping of environmental change and separating between naturogenic and anthropogenic drivers is a difficult endeavor in such highly complex systems. In this research a piece-wise linear regression method was used for breakpoint detection in Rain-Use Efficiency (RUE) time series and a classification of ecosystem response types was produced. Supported by earth observation data, field data, and expert knowledge, this study provides empirical evidence regarding the occurrence of drastic changes in RUE (assessment of the timing, the direction and the significance of these changes) in Northern Eurasian ecosystems between 1982 and 2011. About 36% of the study area (3.4 million km(2) ) showed significant (P agricultural land abandonment. Our study also showed that recurrent droughts deeply affected vegetation productivity throughout the observation period, with a general worsening of the drought conditions in recent years. Moreover, recent human-induced turning points in ecosystem functioning were detected and attributed to ongoing recultivation and change in irrigation practices in the Volgograd region, and to increased salinization and increased grazing intensity around Lake Balkhash. The ecosystem-state assessment method introduced here proved to be a valuable support that highlighted hotspots of potentially altered ecosystems and allowed for disentangling human from climatic disturbances. © 2016 John Wiley & Sons Ltd.

[Adult health problems and coping at life turning points].

Science.gov (United States)

Lee, Sheuan; Lu, Ying-Chi; Yen, Wen-Jiuan; Lin, Shu-Chin

2004-02-01

At important life turning points, middle-aged adults face many physiological changes (e.g., aging, changes in hormone levels) and alterations in family structure (e.g., children growing up and leaving home). In addition to facing these changes and their impacts, adults must also take on challenges in terms of self-concept, body image, life goals, and life meaning. Illnesses that commonly occur during this life stage include menopausal depression, substance abuse, and anxiety. Traditional treatment models are medical-oriented, but curative effects are limited and hospital visits still occur at high frequencies, resulting in increased medical expenses and disruptions in family life. The authors review the current literature on curative models in this area, and discuss the potential of a combination of physical therapy, cognitive, and existential-humanistic therapy to improve patients' physical strength, self-concept, self-esteem, and self-confidence in an effort to overcome physio-psycho-social disorders and to increase vitality.

Forecasting Macedonian Business Cycle Turning Points Using Qual Var Model

Directory of Open Access Journals (Sweden)

Petrovska Magdalena

2016-09-01

Full Text Available This paper aims at assessing the usefulness of leading indicators in business cycle research and forecast. Initially we test the predictive power of the economic sentiment indicator (ESI within a static probit model as a leading indicator, commonly perceived to be able to provide a reliable summary of the current economic conditions. We further proceed analyzing how well an extended set of indicators performs in forecasting turning points of the Macedonian business cycle by employing the Qual VAR approach of Dueker (2005. In continuation, we evaluate the quality of the selected indicators in pseudo-out-of-sample context. The results show that the use of survey-based indicators as a complement to macroeconomic data work satisfactory well in capturing the business cycle developments in Macedonia.

Nitrate transport and supply limitations quantified using high-frequency stream monitoring and turning point analysis

Science.gov (United States)

Jones, Christopher S.; Wang, Bo; Schilling, Keith E.; Chan, Kung-sik

2017-06-01

Agricultural landscapes often leak inorganic nitrogen to the stream network, usually in the form of nitrate-nitrite (NOx-N), degrading downstream water quality on both the local and regional scales. While the spatial distribution of nitrate sources has been delineated in many watersheds, less is known about the complicated temporal dynamics that drive stream NOx-N because traditional methods of stream grab sampling are often conducted at a low frequency. Deployment of accurate real-time, continuous measurement devices that have been developed in recent years enables high-frequency sampling that provides detailed information on the concentration-discharge relation and the timing of NOx-N delivery to streams. We aggregated 15-min interval NOx-N and discharge data over a nine-year period into daily averages and then used robust statistical methods to identify how the discharge regime within an artificially-drained agricultural watershed reflected catchment hydrology and NOx-N delivery pathways. We then quantified how transport and supply limitations varied from year-to-year and how dependence of these limitations varied with climate, especially drought. Our results show NOx-N concentrations increased linearly with discharge up to an average "turning point" of 1.42 mm of area-normalized discharge, after which concentrations decline with increasing discharge. We estimate transport and supply limitations to govern 57 and 43 percent, respectively, of the NOx-N flux over the nine-year period. Drought effects on the NOx-N flux linger for multiple years and this is reflected in a greater tendency toward supply limitations in the three years following drought. How the turning point varies with climate may aid in prediction of NOx-N loading in future climate regimes.

A Turning Point? Recent Developments on Inequality in Latin America and the Caribbean

OpenAIRE

Gasparini, Leonardo; Cruces, Guillermo; Tornarolli, Leopoldo; Marchionni, Mariana

2009-01-01

This paper documents patterns and recent developments on different dimensions of inequality in Latin America and the Caribbean (LAC). New comparative international evidence confirms that LAC is a region of high inequality, although maybe not the highest in the world. Income inequality has fallen in the 2000s, suggesting a turning point from the significant increases of the 1980s and 1990s. There have been some significant improvements toward the reduction in inequalities in the access to prim...

The German energetic turning point: year n+2

International Nuclear Information System (INIS)

Cruciani, Michel

2013-07-01

This publication proposes an analysis of the evolution of the German energy sector, two years after the adoption of a new energy policy. It notably aims at identifying the consequences of this important turning point which was characterised by the decision to phase out nuclear while keeping on reducing energy consumption and greenhouse gas emissions, and developing renewable energies. In a first part, the author comments the objectives associated with the present evolution in terms of reducing the primary energy consumption, reducing raw electric power consumption, energy consumption in transports, CO_2 emissions, of increasing the share of renewable energies and power production from renewable sources, and of complying with European objectives. The second part discusses technical aspects of the development of power generation from renewable sources by addressing the following issues: prospective, grid extension and strengthening, intermittency management, industrial orientation. The third part addresses economic aspects of this development: promotion of electricity production from renewable sources, relationship between power generation from renewable sources and electricity price, public debate on electricity price, employment and economic benefits, financing the energy transition, and the European dimension. In conclusion, the author discusses whether the German energy shift is a model or a counter-example

Turning points in international labor migration: a case study of Thailand.

Science.gov (United States)

Vasuprasat, P

1994-01-01

"This article describes the dynamics of the structural transformation of the Thai economy, labor migration and direct foreign investment and proposes an econometric model to explain the migration phenomenon. Though migration shifts have been significantly influenced by political factors such as the Gulf crisis and tensions with Saudi Arabia, economic factors such as the Thai government's liberalization of markets and the expansion of trade and direct foreign investment have contributed to changes in labor market needs. The economic conditions of a shift from net exporter to net importer for labor are posited in the model. The empirical results reveal a turning point in labor migration from Thailand and also confirm the contribution of commodity export in place of labor export in creating employment and income." excerpt

Streaming instabilities of a non-neutral plasma with turning points

International Nuclear Information System (INIS)

Turner, L.; Finn, J.M.

1995-01-01

Streaming instabilities of a reflexing beam in a slab model of a beam Penning trap or an inertial electrostatic confinement device are studied. Particles may have turning points that may be between the walls. Linear theory is developed for the case in which the self-field cancels the external potential. If the electric field perturbation is odd about the center, these two-stream modes couple the slow waves on the two beams. Even modes consist of two classes: a class of two-stream modes and another class of complex-frequency modes, coupling the slow and fast waves on the same beam. The latter are unstable over a larger range than the two-stream modes. Thermal spread is stabilizing only when the thermal and streaming velocities are comparable. Numerical results for the general class of equilibria show both two-stream-like modes and oscillating modes

Are Mentor Relationships Helping Organizations? An Exploration of Developing Mentee-Mentor-Organizational Identifications Using Turning Point Analysis.

Science.gov (United States)

Bullis, Connie; Bach, Betsy Wackernagel

1989-01-01

Examines developing mentor relationships and the association between mentor relationships and individual-organizational relationships. Indicates that many turning points occur later than proposed in broad-phase models of mentor relationship development. Finds that mentor relationships should not be assumed to benefit organizations. (SR)

TOWARDS COLLABORATION BETWEEN PUBLIC WELFARE AGENCIES AND MASS ENTERTAINMENT MEDIA TO BRING ABOUT A TURNING POINT STAGE IN THE LIVES OF BATTERED WOMEN

Directory of Open Access Journals (Sweden)

Nourit Segev

2010-06-01

Full Text Available This article examines the promoting and impeding factors that advance the turning point in thelives of battered women. The subject is important because of the contribution of the turning pointstage to the ability of women to leave the violent relationship and the way in which the publicwelfare agencies become involved in order to help the victim to advance towards the turning point.The article also reviews the influence of the entertainment media in shaping the positions of thepublic regarding marital violence, the presentation of battered women in the media, and theconnection between their media presentation and their advancement towards the turning point inreality.The research is based on a combination of qualitative and quantitative data, and focuses on contentanalysis. The qualitative content analysis included 40 journal articles, 1 documentary film and onedrama series, the personal interviews included 8 social workers and 6 journalists, and the focusgroup included 8 battered women. The findings indicate an awareness of battered women in thevarious media, and of a gap between the perception of social workers and the journalists regardingthe role of the media in raising social problems.The article calls for cooperation between the media and the professionals in order to construct messages of empowerment that will enable women to advance towards the turning point in theirlives.

Hysteresis compensation for piezoelectric actuators in single-point diamond turning

Science.gov (United States)

Wang, Haifeng; Hu, Dejin; Wan, Daping; Liu, Hongbin

2006-02-01

In recent years, interests have been growing for fast tool servo (FTS) systems to increase the capability of existing single-point diamond turning machines. Although piezoelectric actuator is the most universal base of FTS system due to its high stiffness, accuracy and bandwidth, nonlinearity in piezoceramics limits both the static and dynamic performance of piezoelectric-actuated control systems evidently. To compensate the nonlinear hysteresis behavior of piezoelectric actuators, a hybrid model coupled with Preisach model and feedforward neural network (FNN) has been described. Since the training of FNN does not require a special calibration sequence, it is possible for on-line identification and real-time implementation with general operating data of a specific piezoelectric actuator. To describe the rate dependent behavior of piezoelectric actuators, a hybrid dynamic model was developed to predict the response of piezoelectric actuators in a wider range of input frequency. Experimental results show that a maximal error of less than 3% was accomplished by this dynamic model.

Egg turning behavior and incubation temperature in Forster’s terns in relation to mercury contamination

Science.gov (United States)

Taylor, Gregory T.; Ackerman, Joshua T.; Shaffer, Scott A.

2018-01-01

Egg turning behavior is an important determinant of egg hatchability, but it remains relatively understudied. Here, we examined egg turning rates and egg temperatures in Forster’s terns (Sterna forsteri). We used artificial eggs containing a data logger with a 3-D accelerometer, a magnetometer, and a temperature thermistor to monitor parental incubation behavior of 131 tern nests. Overall, adults turned their eggs an average (±SD) of 3.8 ± 0.8 turns h-1, which is nearly two times higher than that of other seabirds. Egg turning rates increased with nest initiation date. We also examined egg turning rates and egg temperatures in relation to egg mercury contamination. Mercury contamination has been shown to be associated with reduced egg hatchability, and we hypothesized that mercury may decrease egg hatchability via altered egg turning behavior by parents. Despite the high variability in egg turning rates among individuals, the rate of egg turning was not related to mercury concentrations in sibling eggs. These findings highlight the need for further study concerning the potential determinants of egg turning behavior.

Relatively Inexact Proximal Point Algorithm and Linear Convergence Analysis

Directory of Open Access Journals (Sweden)

Ram U. Verma

2009-01-01

Full Text Available Based on a notion of relatively maximal (m-relaxed monotonicity, the approximation solvability of a general class of inclusion problems is discussed, while generalizing Rockafellar's theorem (1976 on linear convergence using the proximal point algorithm in a real Hilbert space setting. Convergence analysis, based on this new model, is simpler and compact than that of the celebrated technique of Rockafellar in which the Lipschitz continuity at 0 of the inverse of the set-valued mapping is applied. Furthermore, it can be used to generalize the Yosida approximation, which, in turn, can be applied to first-order evolution equations as well as evolution inclusions.

Fabrication of fiber optic long period gratings operating at the phase matching turning point using an amplitude mask

Science.gov (United States)

Hromadka, J.; Correia, R.; Korposh, S.

2016-05-01

A fast method for the fabrication of the long period gratings (LPG) optical fibres operating at or near the phase matching turning point (PMTP) with the period of 109.0, 109.5 and 110.0 μm based on an amplitude mask writing system is described. The proposed system allows fabricating 3 cm long LPG sensors operating at PMPT within 20 min that is approximately 8 times faster than point-by-point approach. The reproducibility of the fabrication process was thoroughly studied. The response of the fabricated LPGs to the external change of the refractive index was investigated using water and methanol.

What can be seen beyond the turning points?

International Nuclear Information System (INIS)

Morita, Koji

1997-01-01

LNG markets in Asia has faced turning points in 1990s. There is sluggish growth of Japanese demand, rapid demand growth of Korea and Taiwan, and increase of dependency on the Middle East. Will these situation continue after 2000? In Japan, energy demand will grow steadily, and development of nuclear power stations will not proceed without difficulty. Considering the emission of carbon dioxide, LNG demand will expand more than the Government outlook of 68 ∼ 60 mil. tons in 2010. IEEJ (Institute of Energy Economics Japan) forecasts that it will come to 58 mil. tons in 2010, including 1 ∼ 2 mil. tons of indigenous production. Korea secured two LNG projects newly, Ras Laffan (Qatar) and Oman. Considering the secured volume, LNG consumption will continue to expand even after 2000. But thinking of the lesser population of 21 mil. and warm climate of Taiwan, the extent of LNG demand expansion may not be so large. Big unknown factors exist in Asia: China and India. Their large population can give a great influence on LNG market in Asia. Several gas-fired power projects by IPP are already being planned. According to the Indian Government, as annual production capacity of natural gas is limited, more than 40 bil. m 3 must be fulfilled by import in 2005. Some indicators of China, GDP, energy consumption and so on, are saying that Shanghai and some cities may have already prepared conditions to introduce LNG. They may begin to utilize LNG by taking surplus of existing LNG projects in the later half of 2000s. (LN)

Coupling effects on turning points of infectious diseases epidemics in scale-free networks.

Science.gov (United States)

Kim, Kiseong; Lee, Sangyeon; Lee, Doheon; Lee, Kwang Hyung

2017-05-31

Pandemic is a typical spreading phenomenon that can be observed in the human society and is dependent on the structure of the social network. The Susceptible-Infective-Recovered (SIR) model describes spreading phenomena using two spreading factors; contagiousness (β) and recovery rate (γ). Some network models are trying to reflect the social network, but the real structure is difficult to uncover. We have developed a spreading phenomenon simulator that can input the epidemic parameters and network parameters and performed the experiment of disease propagation. The simulation result was analyzed to construct a new marker VRTP distribution. We also induced the VRTP formula for three of the network mathematical models. We suggest new marker VRTP (value of recovered on turning point) to describe the coupling between the SIR spreading and the Scale-free (SF) network and observe the aspects of the coupling effects with the various of spreading and network parameters. We also derive the analytic formulation of VRTP in the fully mixed model, the configuration model, and the degree-based model respectively in the mathematical function form for the insights on the relationship between experimental simulation and theoretical consideration. We discover the coupling effect between SIR spreading and SF network through devising novel marker VRTP which reflects the shifting effect and relates to entropy.

Turning points towards sustainability: integrative science and policy for novel (but real landscape futures

Directory of Open Access Journals (Sweden)

David J. Brunckhorst

2004-09-01

Full Text Available Non-metropolitan landscapes are the major theatre of interactions where large-scale alteration occurs precipitated by local to global forces of economic, social and environmental change. However, these regional landscape effects are critical also to local natural resource and social sustainability, ecosystem health through to larger scales of biospheric functioning. The institutions contributing pressures and responses consequently shape future landscapes and in turn influence how social systems, resource users, governments and policy makers perceive those landscapes and their future. These are, in essence, complex social-ecological systems intertwined in a multitude of ways at many spatial scales across time. Over time, the cycles of complex social-ecological systems also reach crossroads, which might be crisis points at which future options are no longer available (possibly because of resource degradation or loss, or turning points where opportunities arise when it is easier to change direction towards more sustainable activities. This paper provides some examples of interdisciplinary research that has provided a holistic integration through close engagement with residents and communities or through deliberately implementing integrative high-risk ‘on-ground’ experimental models to ‘learn by doing’. In the final analysis, each project has characteristically, however, sought to integrate through spatial (if not temporal synthesis, policy analysis and (new or changed institutional arrangements that are relevant locally and corporately, as well as at broader levels of government and geography. This has provided transferable outcomes that can contribute real options and adaptive capacity for suitable positive futures.

1996, a turning point in the evolution of the EDF with good financial results

International Nuclear Information System (INIS)

1997-03-01

This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997 and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results

The Nature of Child-Adult Interaction. From Turn-Taking to Understanding Pointing and Use of Pointing Gestures

Directory of Open Access Journals (Sweden)

Białek Arkadiusz

2014-08-01

Full Text Available Analyses of interactions between an adult and a one-year-old child are often connected with studying early communicative competences, e.g. the child’s participation in turn-taking sequences, in joint attention, and use of pointing gestures. Infants’ communicative behaviors were studied using a structured observational measure - the Early Social Communication Scales (Mundy et al., 2003 in a study of 358 12-month-old children. An exploratory factor analysis revealed: (i a distinction between the categories of initiation and response among the behaviors displayed, (ii simple and complex behavior categories occurring; (iii the presence within one factor of behaviors fulfilling various functions (e.g. requesting and sharing interest. An analysis of the results showed that communicative competences can be classified according to their level and ignoring their function, and made it possible to suggest modifications to the way in which behaviors are coded on the ESCS and to complement the procedure of studying early communicative competences.

Noncontact on-machine measurement system based on capacitive displacement sensors for single-point diamond turning

Science.gov (United States)

Li, Xingchang; Zhang, Zhiyu; Hu, Haifei; Li, Yingjie; Xiong, Ling; Zhang, Xuejun; Yan, Jiwang

2018-04-01

On-machine measurements can improve the form accuracy of optical surfaces in single-point diamond turning applications; however, commercially available linear variable differential transformer sensors are inaccurate and can potentially scratch the surface. We present an on-machine measurement system based on capacitive displacement sensors for high-precision optical surfaces. In the proposed system, a position-trigger method of measurement was developed to ensure strict correspondence between the measurement points and the measurement data with no intervening time-delay. In addition, a double-sensor measurement was proposed to reduce the electric signal noise during spindle rotation. Using the proposed system, the repeatability of 80-nm peak-to-valley (PV) and 8-nm root-mean-square (RMS) was achieved through analyzing four successive measurement results. The accuracy of 109-nm PV and 14-nm RMS was obtained by comparing with the interferometer measurement result. An aluminum spherical mirror with a diameter of 300 mm was fabricated, and the resulting measured form error after one compensation cut was decreased to 254 nm in PV and 52 nm in RMS. These results confirm that the measurements of the surface form errors were successfully used to modify the cutting tool path during the compensation cut, thereby ensuring that the diamond turning process was more deterministic. In addition, the results show that the noise level was significantly reduced with the reference sensor even under a high rotational speed.

Auto-ethnographical investigation of turning points in dance education – a method for creating awareness of one’s own pre-understanding in qualitative research

Directory of Open Access Journals (Sweden)

Trine Ørbæk

2013-06-01

Full Text Available This article presents an auto-ethnographical investigation of a pedagogical practice in creative dance education. This research is a part of the PhD-project “To create dance” in physical education teacher education based at The Norwegian School of Sport Sciences and The Norwegian National Graduate School in Teacher Education. The method used is based on life stories, and turning points are used as analytical tools. The turning point analysis highlights that an auto-ethnographical investigation is relevant when it comes to creating awareness of pre-understandings in the development of pedagogical experiences from one’s own research field. In addition, the article shows that the turning point analysis may contribute to increasing knowledge on how one’s own experience can change when narrated in new ways. Finally, the study shows that making use of auto-ethnography may also have value as a reflexive approach for becoming more conscious of one’s own research process.

Turned on/turned off

DEFF Research Database (Denmark)

Petersen, Eva Bendix

2016-01-01

position, it attempts to sense into the lived experience of being subject to, and of, turns in social theory. As a whole the paper seeks to work with and allow for multiplicity in tone, focus, researcher positioning, reader positioning, and more, to see what knowledge that does not seek confident closure......Through cacophonic story-telling, emerging from ethnographic observations from academic scenes in Australia and elsewhere, the article seeks to explore the timeliness and untimeliness of feminist knowledge production. Rather than arguing a particular point or making a claim for a particular...

Transitions in state public health law: comparative analysis of state public health law reform following the Turning Point Model State Public Health Act.

Science.gov (United States)

Meier, Benjamin Mason; Hodge, James G; Gebbie, Kristine M

2009-03-01

Given the public health importance of law modernization, we undertook a comparative analysis of policy efforts in 4 states (Alaska, South Carolina, Wisconsin, and Nebraska) that have considered public health law reform based on the Turning Point Model State Public Health Act. Through national legislative tracking and state case studies, we investigated how the Turning Point Act's model legal language has been considered for incorporation into state law and analyzed key facilitating and inhibiting factors for public health law reform. Our findings provide the practice community with a research base to facilitate further law reform and inform future scholarship on the role of law as a determinant of the public's health.

Turning breech babies after 34 weeks: the if, how, & when of turning breech babies.

Science.gov (United States)

Cohain, Judy Slome

2007-01-01

Techniques for turning a term breech baby are 1). External cephalic version (ECV) using hands and ultrasound only; 2). Acupuncture point stimulation, by needle or moxibustion; 3). Chiropractic "Webster" technique; 4). Hypnotherapy; and 5). Special exercises. Fifty % of breech fetuses at 34 weeks will turn by themselves to head down by 38 weeks. Therefore, to be considered effective, a technique for turning breech must turn the baby and keep it turned more than 50% of the time. Only ECV with an experienced practitioner has been documented to have a greater than 50% success rate at 37 weeks; in 95% of cases the head stays down. Most women experience the fetus turning by hand as quick but very painful. "Unstable lie" is sometimes used as a baseless excuse for inducing labor after the baby turns from breech to head down. (judyslome@hotmail.com).

Fixation of operating point and measurement of turn on characteristics of IGBT F4-75R06W1E3

Science.gov (United States)

Haseena, A.; Subhash Joshi T., G.; George, Saly

2018-05-01

For the proficient operation of the Power electronic circuit, signal level performance of power electronic devices are very important. For getting good signal level characteristics, fixing operating point is very critical. Device deviates from the typical characteristics given in the datasheet due to the presence of stray components in the circuit lay out. Fixation of operating point of typical silicon IGBT and its turn on characteristics is discussed in this paper.

Life shocks and crime: a test of the "turning point" hypothesis.

Science.gov (United States)

Corman, Hope; Noonan, Kelly; Reichman, Nancy E; Schwartz-Soicher, Ofira

2011-08-01

Other researchers have posited that important events in men's lives-such as employment, marriage, and parenthood-strengthen their social ties and lead them to refrain from crime. A challenge in empirically testing this hypothesis has been the issue of self-selection into life transitions. This study contributes to this literature by estimating the effects of an exogenous life shock on crime. We use data from the Fragile Families and Child Wellbeing Study, augmented with information from hospital medical records, to estimate the effects of the birth of a child with a severe health problem on the likelihood that the infant's father engages in illegal activities. We conduct a number of auxiliary analyses to examine exogeneity assumptions. We find that having an infant born with a severe health condition increases the likelihood that the father is convicted of a crime in the three-year period following the birth of the child, and at least part of the effect appears to operate through work and changes in parental relationships. These results provide evidence that life events can cause crime and, as such, support the "turning point" hypothesis.

Approximate solutions and error bounds for the wave equation in a stratified ionosphere with turning points

International Nuclear Information System (INIS)

Nalesso, G.F.; Jacobson, A.R.

1991-01-01

A solution to the problem of a plane electromagnetic wave traveling parallel to a constant magnetic field in a horizontally stratified ionosphere was developed assuming that the permittivity of the medium can be represented as the sum of an unperturbed component and a perturbed component. The method is successfully applied to the case of a linearly varying permittivity of a lossless ionosphere with a superimposed Gaussian perturbing term. The feasibility of applying the method in the presence of an odd number of turning points is discussed. 13 refs

CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FIFTH GRADE STUDENTS

Directory of Open Access Journals (Sweden)

Jovica Petković

2006-06-01

Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty one students from the fifth grade of Elementary School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

A Qualitative Study of Turning Points or Aha! Moments in Older Adults' Discussions About Organ Donation.

Science.gov (United States)

Downing, Kimberly; Jones, Linda L

2018-01-01

Older adults (50-70 years old) have lower organ donor registration rates than younger adults. Older adults have different informational needs and donor registration behavior than younger age groups. The objective of this qualitative study was to understand insights of older adults about organ donation to effectively address the barriers to becoming an organ donor. This study identified turning points as "Aha!" moments that occurred during a dialogue intervention where older adults discussed benefits, barriers, and process to organ donation. Dialogues were held with small groups of older adults in 11 communities in a Midwestern organ procurement organization service area. Participants were positive to organ donation, but not registered as an organ donor. Methods/Approach: Qualitative analysis of verbatim comments from the dialogue and a follow-up survey were used to examine turning points or "Aha!" moments of participants' decision-making about organ donation and organ donor registration. Twenty-one separate in-depth dialogues were conducted with 198 participants, with mean age of 60.57 years. There were 2757 separate comments coded with 465 of the comments (17%) identified as providing Aha! moments during the dialogue. Three themes include benefits of organ donation (30%), barriers about organ donation (39%), and organ donation process (31%). The research identified moments in the dialogue where possible learning about organ donation may have occurred. After participation in the dialogue process, there was an increase in intent to register to be an organ donor, organ donation discussion with family and friends, and organ donor registration.

Diamond turning of Si and Ge single crystals

Energy Technology Data Exchange (ETDEWEB)

Blake, P.; Scattergood, R.O.

1988-12-01

Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FOURTH GRADE OF HIGH SCHOOL

Directory of Open Access Journals (Sweden)

Jovica Petković

2008-08-01

Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty students from the fourth grade of High School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

The ontological turn meets the certainty of death.

Science.gov (United States)

McDonald, Maryon

2017-08-01

The 'ontological turn' involves some anthropological points of long standing but the approaches recently coordinated into this turn have been presented as a 'call to arms', as shaking up 'mono-realist singularities' and as inherently political. This fighting talk has no doubt made important contributions to anthropology and insights from the ontological turn can help in anthropological understandings of medical practices. However, this paper contends that this helpfulness is also limited and that a call to arms may be inappropriate. This point is made through an ethnographic understanding of medical concern about the diagnosis of death.

Learning turning points--in life with long-term illness--visualized with the help of the life-world philosophy.

Science.gov (United States)

Berglund, Mia M U

2014-01-01

A long-term illness is an occurrence that changes one's life and generates a need to learn how to live with it. This article is based on an empirical study of interviews on people living with different long-term illnesses. The results have shown that the learning process is a complex phenomenon interwoven with life as a whole. The essential meaning of learning to live with long-term illness concerns a movement toward a change of understanding of access to the world. In this movement, in which everyday lives as well as relationships with oneself and others are affected, a continual renegotiation is needed. Texts from existential/lifeworld philosopher, Heidegger and Gadamer, have been used to get a greater understanding of the empirical results. These texts have been analysed with particular focus on learning turning points and the importance of reflection. The results are highlighted under the following themes: Pursuit of balance-the aim of learning, The tense grip-the resistance to learning, To live more really-the possibilities of the learning, Distancing-the how of the learning, and The tense of the learning-the whole of the learning. In those learning turning points are present. Knowledge from this study has been used to make a didactic model designed to give caregivers a tool to support patients' learning. The didactic model is called: The challenge to take charge of life with a long-term illness.

Keys to successful diabetes self-management for uninsured patients: social support, observational learning, and turning points: a safety net providers' strategic alliance study.

Science.gov (United States)

Madden, Melissa Hanahan; Tomsik, Philip; Terchek, Joshua; Navracruz, Lisa; Reichsman, Ann; Clark, Terri Clemons; Cella, Peggi; Weirich, Stephen A; Munson, Michelle R; Werner, James J

2011-03-01

To examine how medically uninsured patients who receive health care at federally qualified health centers and free clinics are able to successfully self-manage diabetes compared to patients who are less successful. Two distinct groups of patients with diabetes for 6 months or longer were enrolled: (1) successful, defined as those with glycated hemoglobin (HbA1c) of 7% or less or a recent improvement of at least 2% (n=17); and (2) unsuccessful, defined as patients with HbAlc of at least 9% (n=9) and without recent improvement. Patients were interviewed about enabling factors, motivators, resources, and barriers to diabetes self-management. Data from interviews, chart reviews, and clinician surveys were analyzed using qualitative methods and statistical techniques. African Americans comprised 57.7% of the sample and whites 38.5% (N=26). No significant differences were detected between successful and unsuccessful groups in age, race, education, or employment status. Clinicians rated unsuccessful patients as having more severe diabetes and significantly lower levels of control than successful patients. Compared to unsuccessful patients, successful patients more often reported having friends or family with diabetes, more frequently sought information about the disease, used evidence-based self-management strategies, held more accurate perceptions of their own diabetes control, and experienced "turning point" events that motivated increased efforts in disease management. Patients who successfully managed diabetes learned from diabetic family members and interpreted disease-related events as motivational turning points. It may be beneficial to incorporate social learning and motivational enhancement into diabetes interventions to increase patients' motivation for improved levels of self-management.

Postural strategies and sensory integration: no turning point between childhood and adolescence.

Directory of Open Access Journals (Sweden)

Sophie Mallau

reweighting for postural strategies as assessed by very slow support oscillations presents a linear development without any qualitative turning point between childhood and adolescence.

An application of eddy current damping effect on single point diamond turning of titanium alloys

Science.gov (United States)

Yip, W. S.; To, S.

2017-11-01

Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance.

An application of eddy current damping effect on single point diamond turning of titanium alloys

International Nuclear Information System (INIS)

Yip, W S; To, S

2017-01-01

Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance. (paper)

Long-period gratings in photonic crystal fibers operating near the phase-matching turning point for evanescent chemical and biochemical sensing

Science.gov (United States)

Kanka, Jiri

2012-06-01

Fiber-optic long-period grating (LPG) operating near the dispersion turning point in its phase matching curve (PMC), referred to as a Turn Around Point (TAP) LPG, is known to be extremely sensitive to external parameters. Moreover, in a TAP LPG the phase matching condition can be almost satisfied over large spectral range, yielding a broadband LPG operation. TAP LPGs have been investigated, namely for use as broadband mode convertors and biosensors. So far TAP LPGs have been realized in specially designed or post-processed conventional fibers, not yet in PCFs, which allow a great degree of freedom in engineering the fiber's dispersion properties through the control of the PCF structural parameters. We have developed the design optimization technique for TAP PCF LPGs employing the finite element method for PCF modal analysis in a combination with the Nelder-Mead simplex method for minimizing the objective function based on target-specific PCF properties. Using this tool we have designed TAP PCF LPGs for specified wavelength ranges and refractive indices of medium in the air holes. Possible TAP PCF-LPG operational regimes - dual-resonance, broadband mode conversion and transmitted intensity-based operation - will be demonstrated numerically. Potential and limitations of TAP PCF-LPGs for evanescent chemical and biochemical sensing will be assessed.

Turn key contracts

International Nuclear Information System (INIS)

Feretic, D.

1975-01-01

The aim of this summary is to point out some specific areas which have to be covered in a turn-key contract and which are of primarily interest to the buyer of a nuclear plant. It will be assumed that the buyer is utility company in a developing country and a plant supplier a company in an industrial country. (orig./FW) [de

Exploring interaction between a non-speaking boy using aided AAC and his everyday communication partners: features of turn organizing and turn design

DEFF Research Database (Denmark)

Pilesjö, Maja Sigurd; Rasmussen, Gitte

2011-01-01

-at-action is suggested. The analyses demonstrate that the boy’s turn-at-actions are oriented to as a co-constructed and thus interactionally achieved unit: the boy points at a bliss symbol which is given voice by the speaking co-participant. In and through the relevant made voicing of the turn-at-action, a turn...... AAC, bliss symbolics. The analysis indicates that the participants can collaborately create and orient to units in interaction equivalent to turns in interaction although they differ dramatically from ordinary turns-at-talk. In order to capture the nature of the described units, the category turn...

O turning point da grande reportagem multimídia

OpenAIRE

Longhi, Raquel Ritter; Universidade Federal de Santa Catarina / Campus Reitor João David Ferreira Lima. Florianópolis, Santa Catarina. Brasil. CEP: 88049-900 Tel: (48) 3721.9000

2015-01-01

Este artigo analisa o estado da arte da grande reportagem multimídia no jornalismo online, atentando para um momento que se pode definir como “turning point”, ou ponto de virada desse tipo de formato noticioso. A partir de uma sistematização da evolução dos formatos expressivos multimidiáticos da notícia no jornalismo digital, o artigo identifica três momentos principais dessa trajetória: o slide-show noticioso, no início dos anos 2000; os especiais multimídia, de meados de 2000 a 2011 e a gr...

Interferometric evaluation of diamond-turned mirrors for CO2 laser fusion

International Nuclear Information System (INIS)

Munroe, J.L.

1979-01-01

It is shown that single-point diamond-turned optics exhibit different characteristics than conventionally manufactured optics and the type of information required by the machinist is quite different than the information that would be required by an optician. It was also seen, with Antares being a good example, that single-point diamond turning allows the manufacture of geometries and scales that might be unthinkable if conventional manufacturing were to be used. As single-point diamond turning continues to improve in quality, machined optics will find application at shorter and shorter wavelengths. A whole new formalism to describe manufacturing errors in terms meaningful to the machinist will have to be developed

Tadzhikistan-Russia: Geopolitical Relations at the Turn of the Century

Directory of Open Access Journals (Sweden)

Zafari Sherali Saidzoda

2015-01-01

Full Text Available In this article the writer analyses the development peculiarities of the Tajik-Russian geopolitical relations during the establishment of Tajikistan foreign policy up to the commencement of multi-vector «open doors» policy in 2003-2004. Since the establishment of peace and stability in Tajikistan beginning from the year of 2000 the socio-economic development issues have been set as prior actions. To boost the economy, attraction of foreign investments, creation of new jobs and improvement of life standard of population were the issues to address. Political leaders of Tajikistan had no right to waste time making no headway. The country inevitably faced the issue of diversification of interstate and foreign economic relations, including outside the CIS. The article highlights that the foreign «open door» policy declared at the turn of2002-2003 implied mandatory modernization of the Tajik-Russian cooperation through strengthening its economic and human dimensions, adjusting the strategic partnership and alliance between the two states to the new global political realities. As to the geopolitical and military-political priorities, which Tajikistan had firmly adhered throughout the entire 1990th since its Independence, they actually remained unchanged even after 2002. The author points out the long-term Russian presence in the form of a large scale military base and military infrastructure on the territory of Tajikistan. The Republic is one of the most consistent, active and disciplined members of the Collective Security Treaty Organization. During the first decade of the XXI century the political leaders of Tajikistan had been receiving offers from foreign non CIS countries with regard to deployment of military facilities on a fee basis on the territory of Tajikistan which were not even considered by the Government. Thus, the multi-vector foreign policy of «open doors» has been reflected in diversification of the international relations of

Exact 2-point function in Hermitian matrix model

International Nuclear Information System (INIS)

Morozov, A.; Shakirov, Sh.

2009-01-01

J. Harer and D. Zagier have found a strikingly simple generating function [1,2] for exact (all-genera) 1-point correlators in the Gaussian Hermitian matrix model. In this paper we generalize their result to 2-point correlators, using Toda integrability of the model. Remarkably, this exact 2-point correlation function turns out to be an elementary function - arctangent. Relation to the standard 2-point resolvents is pointed out. Some attempts of generalization to 3-point and higher functions are described.

L'aplicació TurningPoint com a eina d'aprenentatge transformacional en els processos educatius

Directory of Open Access Journals (Sweden)

Antonio Marín García

2016-06-01

Full Text Available El projecte de convergència educativa impulsat per l'Espai Europeu d'Educació Superior (EEES ha generat noves metodologies docents i processos d'avaluació en els sistemes d'educació universitaris. Aquest nou plantejament pedagògic genera una inqüestionable oportunitat perquè els distints segments de la comunitat universitària vegen en les TIC una ferramenta fonamental per a l'elaboració de continguts docents que faciliten el procés ensenyança-aprenentatge. Aquest article presenta la ferramenta TurningPoint, que es centra en afavorir la interacció docent-alumne, facilitant la participació i l'avaluació contínua. Aquesta ferramenta presenta avantatges enfront d'altres aplicacions existents a causa de la seua varietat d'utilitats i potencial d'ús, i ha sigut utilitzada amb èxit a diversos programes promoguts per la Facultat d'Economia de la Universitat de València. 

The Machadian turning point

Directory of Open Access Journals (Sweden)

Roberto Schwarz

Full Text Available The article examines the evolution of the works of Machado de Assis and stresses their exceptionality within the Brazilian postcolonial literary context, focusing on the author's thematic and formal volte-face with regard to the novels of the first phase. From Memórias póstumas de Brás Cubas - The Posthumous Memoirs of Bras Cubas, often subtitled as the Epitaph of a Small Winner - (1880 on, Machadian fiction takes on a new composition principle, which challenges the conventions dictated by realism and whose uniqueness lies in the narrator's arbitrary and transgressive development. While the narrative sets a tone that is both cosmopolitan and universalizing in dealing with local matters, it takes on the perspective of the lordly class. By identifying the events that constitute this procedure, the author highlights the literary genius and the scope of the Machadian view on the particularities of social relations in Brazil.

[INVITED] Design of turn around point long period fiber grating sensor with Au-nanoparticle self monolayer

Science.gov (United States)

Bandyopadhyay, Sankhyabrata; Basumallick, Nandini; Bysakh, Sandip; Dey, Tanoy Kumar; Biswas, Palas; Bandyopadhyay, Somnath

2018-06-01

In this paper studies on the design and fabrication of a long period fiber grating (LPFG) with a self mono layer of gold nanoparticle (AuNP) has been presented. Refractive index (RI) sensitivity of a dispersed cladding mode (DCM) near turn around point (TAP) of its phase matching curve (PMC) has been investigated with and also without AuNP coated LPFG. The typical role played by the intermediate layer of AuNP on the effective index and thus on the sensitivity of the cladding mode to the surrounding RI has also been explored by carrying out coupled mode analysis of the requisite multilayer waveguide. Deposition of AuNP enhanced the sensitivity by more than a factor of 2. Measured sensitivity was found to be ∼3928 nm/refractive index unit (RIU) in the range of 1.3333-1.3428.

Brokdorf - the symbol for a political turning-point. Brokdorf - Symbol einer politischen Wende

Energy Technology Data Exchange (ETDEWEB)

Aust, S

1981-01-01

Brokdorf - this spot in the North of the F.R. of Germany designates a front which is no longer the only place where the argument of 'yes' or 'no' to nuclear energy is discussed. The citizens have lost their confidence in the competence of those governing, some concerns have betrayed them, politicians have lied, and the sufficiently-known German shortsightedness has kept up celebrating tradition - this is what has happened during the seven years' war about the Brokdorf nuclear power plant. For even without nuclear power the lights won't go out and the unemployment figures will not increase. In the meantime the heavy protests of environmentally-minded citizens against an industrial power which is solely orientated towards competition has seized all strata of our society. Now, since a handful of politicians are also timidly beginning to refuse to submit themselves to the alleged forces underlying the existing circumstances, the conflict between big industry and governmental power is programmed at least as far as topics of energy policy are concerned. A political turning-point. Or does the atomic state show its teeth because it is afraid of the democratic formation of a common will of those who it used to consider as an incapacitated herd of voters.

Grey Relational Analyses for Multi-Objective Optimization of Turning S45C Carbon Steel

International Nuclear Information System (INIS)

Shah, A.H.A.; Azmi, A.I.; Khalil, A.N.M.

2016-01-01

The optimization of performance characteristics in turning process can be achieved through selection of proper machining parameters. It is well known that many researchers have successfully reported the optimization of single performance characteristic. Nevertheless, the multi-objective optimization can be difficult and challenging to be studied due to its complexity in analysis. This is because an improvement of one performance characteristic may lead to degradation of other performance characteristic. As a result, the study of multi-objective optimization in CNC turning of S45C carbon steel has been attempted in this paper through Taguchi and Grey Relational Analysis (GRA) method. Through this methodology, the multiple performance characteristics, namely; surface roughness, material removal rate (MRR), tool wear, and power consumption; can be optimized simultaneously. It appears from the experimental results that the multiple performance characteristics in CNC turning was achieved and improved through the methodology employed. (paper)

General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software

Directory of Open Access Journals (Sweden)

D. S. Blinov

2017-01-01

Full Text Available One of the most important trends in development of machine engineering is to improve load capacity of mechanisms, assemblies and parts without increasing their overall dimensions and weight. This is also relevant to the most promising items so far, i.e. orbital roller drives (ORD, which are the rotational-to-progressive motion converters widely used in vehicles. The previously published article suggested increasing a load capacity (by about 15% through reducing a thread turn section angle of the threaded ORD components and change of the radius of roller thread turn section outline. Due to such ORD modification, a number of the most critical ORD parameters are to be changed thereby demanding further research. Further, the article published suggests a method considering the abovementioned changes to calculate the dimensions of ORD main components and their tolerance ranges.Though this method being not complete as the increment of ORD center-to-center spacing in relation to its rated value, required for assembly, is unknown; and to determine the ORD center-to-center spacing increment, outer diameters of the roller and screw threads are to be known. Hence, these two methods are interconnected.This article presents the numerical calculation method, mathematical support and method to determine the increment of ORD center-to-center spacing and initial contact point of the mating roller and screw thread turns. Due to considerable scope of calculations, the method was turned into the software.Similar calculation methods and techniques were developed to a particular case, where the thread turn section angle of the threaded components was of 90°, and the roller thread turn section outline was a circular arc centered to the roller axis. Hence the developed numerical calculation method, mathematical support and technique refer to the general case which is to determine the ORD center-to-center spacing increment and initial contact point of the mating roller

Keys to Successful Diabetes Self-Management for Uninsured Patients: Social Support, Observational Learning, and Turning Points A Safety Net Providers’ Strategic Alliance Study

Science.gov (United States)

Hanahan, Melissa A.; Werner, James J.; Tomsik, Phillip; Weirich, Stephen A.; Reichsman, Ann; Navracruz, Lisa; Clemons-Clark, Terri; Cella, Peggi; Terchek, Joshua; Munson, Michelle R.

2015-01-01

Objective To determine how medically uninsured patients with limited material resources successfully manage diabetes. Methods Clinicians at 5 safety net practices enrolled uninsured adult patients (N=26) with prior diagnosis of diabetes for 6 months or longer. Patients were interviewed about enabling factors, motivations, resources, and barriers. Chart reviews and clinician surveys supplemented interview data. Interview, survey, and chart review data were analyzed and findings were summarized. Results Two distinct groups of patients were investigated: 1) “successful,” defined as those with an HbA1c of ≤7% or a recent improvement of at least 2% (n=17); and 2) “unsuccessful,” defined as patients with HbA1c of ≥9% (n=9) without recent improvement. In comparison to unsuccessful patients, successful patients more often reported having friends or family with diabetes, sought information about the disease, used evidence-based self-management strategies, held an accurate perception of their own disease control, and experienced “turning point” events that motivated increased efforts in disease management. Conclusions Uninsured safety net patients who successfully managed diabetes learned from friends and family with diabetes and leveraged disease-related events into motivational turning points. It may be beneficial for clinicians to incorporate social learning and motivational enhancement into diabetes interventions to increase patients’ motivation for improved levels of self-management. PMID:21671529

Relative Critical Points

Directory of Open Access Journals (Sweden)

Debra Lewis

2013-05-01

Full Text Available Relative equilibria of Lagrangian and Hamiltonian systems with symmetry are critical points of appropriate scalar functions parametrized by the Lie algebra (or its dual of the symmetry group. Setting aside the structures – symplectic, Poisson, or variational – generating dynamical systems from such functions highlights the common features of their construction and analysis, and supports the construction of analogous functions in non-Hamiltonian settings. If the symmetry group is nonabelian, the functions are invariant only with respect to the isotropy subgroup of the given parameter value. Replacing the parametrized family of functions with a single function on the product manifold and extending the action using the (coadjoint action on the algebra or its dual yields a fully invariant function. An invariant map can be used to reverse the usual perspective: rather than selecting a parametrized family of functions and finding their critical points, conditions under which functions will be critical on specific orbits, typically distinguished by isotropy class, can be derived. This strategy is illustrated using several well-known mechanical systems – the Lagrange top, the double spherical pendulum, the free rigid body, and the Riemann ellipsoids – and generalizations of these systems.

Relationship between relative humidity and the dew point ...

African Journals Online (AJOL)

This research was aimed at determining the relationship between relative humidity and the dew point temperature in Benin City, Edo State, Nigeria. The dew point temperature was approximated from the measured air temperature and relative humidity with the aid of a currently self-designed weather monitoring system.

Turning points in nonlinear business cycle theories, financial crisis and the 2007-2008 downturn.

Science.gov (United States)

Dore, Mohammed H I; Singh, Ragiv G

2009-10-01

This paper reviews three nonlinear dynamical business cycle theories of which only one (The Goodwin model) reflects the stylized facts of observed business cycles and has a plausible turning point mechanism. The paper then examines the US (and now global) financial crisis of 2008 and the accompanying downturn in the US. The paper argues that a skewed income distribution could not sustain effective demand and that over the 2001-2006 expansion demand was maintained through massive amounts of credit, with more than 50 percent of sales in the US being maintained through credit. A vector autoregression model confirms the crucial role played by credit. However legislative changes that dismantled the restrictions placed on the financial sector after the crash of 1929 and the consequent structural changes in the financial sector after 1980 enabled the growth of new debt instruments and credit. But overexpansion of credit when profits and house prices were declining in 2005/06 led to a nonlinear shift due to a new realization of the poor quality of some of this debt, namely mortgage backed securities. Bankruptcies, followed by retrenchment at the banks, then led to the bursting of the credit bubble, with the possibility of a severe recession.

Making the case: leveraging resources toward public health system improvement in Turning Point states.

Science.gov (United States)

Bekemeier, Betty; Riley, Catharine M; Padgett, Stephen M; Berkowitz, Bobbie

2007-01-01

Leveraging funds to sustain the efforts of a grant-funded initiative is often an explicit, or implicit, expectation in philanthropy. However, the magnitude of funds leveraged and the factors that facilitate success in leveraging are rarely researched. An example of one of these grant-funded initiatives is the National Turning Point Initiative. Twenty-one states received funding from The Robert Wood Johnson Foundation as part of this initiative to establish and implement strategic goals for achieving significant statewide public health system improvement through diverse, cross-sector partnerships. Leaders from 17 of these 21 states participated in a two-phased study regarding the leveraging of additional funds for their public health infrastructure improvement activities. This article reports on the second phase of the study. In this phase, key informant interviews were conducted to examine how leveraging of resources occurred as part of this large national initiative. Findings indicate that the combination of a comprehensive planning process and a broad-based partnership was crucial in securing resources to expand their efforts. The ability to strategically respond to unexpected events and opportunities also helped states use their plans and partnerships to "make the case" for additional resources to improve their public health infrastructure.

The Nogay Horde in the System of International Relations at the turn of the 15th–16th centuries »

Directory of Open Access Journals (Sweden)

M.V. Moiseev

2016-07-01

Full Text Available The article is devoted to the study of foreign policy of the Nogai Horde as well as to its attempts to join the system of international relations of the Western Desht. The author identified the main geopolitical interests of the Manghyt Yurt. Struggle against the Great Horde was a significant factor in the formation of international relations of the Western Desht. It turned out to be the most important factor that both cemented political alliances in the region and ensured their viability. However, we should point out the possibility of coalition configurations’ changing, bearing in mind that the interests of the Nogai Horde, that is of a new player, were not always taken into account. In 1493, such an attempt was undertaken by Mirza Musa, but since he had encountered resistance, this attempt was unsuccessful. Reliance on the Siberian Yurt played a much larger role for the Nogai claims. Using the Siberian Chinggisids, the Nogais managed to legitimize their claims to the Kazan khanate. Particularly successful were the events in 1496. However, these events had shown the lack of resources of the Nogai Horde to fight with the Russian government and eventually led to the restriction of the Nogai policy interests by the marriage diplomacy. The Nogai-Crimean confrontation and struggle for control over the Volga crossings determined the nature of international relations in the Western Desht and became a major geopolitical factor in the region after the defeat of the Great Horde. However, for the turn of the 15th–16th centuries the Crimean-Nogai confrontation had not yet become irreversible. In this struggle a new challenge faced the Nogais: they had to take hold of the Volga transports and Haji-Tarkhan for effective control over the right bank of the Volga. This logic of events would lead to a new great war in the Western Desht, in which the Nogai Horde was to play a leading role. However the Kazakh invasion dramatically altered the balance of power

Train turn restrictions and line plan performance

DEFF Research Database (Denmark)

Burggraeve, Sofie; Bull, Simon Henry; Lusby, Richard Martin

In this paper we study the impact of the `turn conditions' in end stations on the performance of a line plan. If trains have to turn on their platform in an end station, the yoccupy the platform for several minutes. A more preferred option, from a timetabling point of view, would be that a train...... in a exible and large enough shunt. Starting from a given line plan, we compare two timetables, one where trains have to turn on their platform and one where trains can turn in a shunt. We evaluate the impact on the performance of the line plan by its feasibility for timetabling,the minimum overall buffer...... disappears from the platform in its end station after dwelling and only appears again when departing for a subsequent trip. In this case, the train will not interfere with other trains that dwell on the platform during the time between these events. However, this option is only possible if the train can stay...

Turning point: the Robert Wood Johnson Foundation's effort to revitalize public health at the state level.

Science.gov (United States)

Hassmiller, Susan

2002-01-01

The Robert Wood Johnson (RWJ) Foundation initiated Turning Point in collaboration with the W.K. Kellogg Foundation (Kellogg) in 1997. The purpose of this major national initiative was to strengthen the public health infrastructure in the United States so that states, local communities, and their public health agencies might respond to the challenge to protect and improve the public's health in the 21st century. RWJ funded 21 states and Kellogg funded 43 communities to work together to create a new way of thinking about how health could be improved and who should be involved. Although the ultimate outcome was to improve health, both foundations expected diverse partnerships to work together to create strategic health improvement plans at both the community and state levels. The foundations funded a variety of strategies within those health improvement plans during an implementation phase. The premise in funding partnerships, as opposed to a single entity, was that effective public health systems would be developed best through a shared responsibility (including the private sector) for the health of a community.

Hilbert schemes of points and infinite dimensional Lie algebras

CERN Document Server

Qin, Zhenbo

2018-01-01

Hilbert schemes, which parametrize subschemes in algebraic varieties, have been extensively studied in algebraic geometry for the last 50 years. The most interesting class of Hilbert schemes are schemes X^{[n]} of collections of n points (zero-dimensional subschemes) in a smooth algebraic surface X. Schemes X^{[n]} turn out to be closely related to many areas of mathematics, such as algebraic combinatorics, integrable systems, representation theory, and mathematical physics, among others. This book surveys recent developments of the theory of Hilbert schemes of points on complex surfaces and its interplay with infinite dimensional Lie algebras. It starts with the basics of Hilbert schemes of points and presents in detail an example of Hilbert schemes of points on the projective plane. Then the author turns to the study of cohomology of X^{[n]}, including the construction of the action of infinite dimensional Lie algebras on this cohomology, the ring structure of cohomology, equivariant cohomology of X^{[n]} a...

Diamond turning of glass

Energy Technology Data Exchange (ETDEWEB)

Blackley, W.S.; Scattergood, R.O.

1988-12-01

A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

The Turning Point for Morphomechanical Remodeling During Complete Intestinal Obstruction in Rats Occurs After 12-24 h.

Science.gov (United States)

Sun, Daming; Zhao, Jingbo; Liao, Donghua; Huang, Zhiyong; Gregersen, Hans

2018-05-01

Intestinal obstruction prompts luminal dilation and wall remodeling proximal to the site of obstruction. Studies on temporal and spatial morphomechanical remodeling are needed for comprehending the pathophysiology of acute intestinal obstruction. The aim was to estimate the no-load and zero-stress morphomechanical properties in circumferential and longitudinal direction at 0, 6, 12, 24, 36, and 48 h after complete intestinal obstruction. Obstruction of the distal ileum was created surgically by placement of a polyethylene ring for up to 48 h in 30 rats. Sham and normal groups were also studied (n = 12). Five 6 cm-long intestinal segments proximal to the obstruction site were used for histological, morphometric and mechanical analysis at the designated times. Morphomechanical changes were huge but only subtle changes were observed between the 5 segments during the obstruction period. Due to dilation, the serosal length and mucosal length increased continuously from 6 to 48 h (p h and beyond (p h where after the opening angle increased and the bending angle returned to pre-obstruction levels. For the residual stretch ratios and the position of the neutral axis the turning point was found after 24 h. Histologically, the thickness and area of most wall layers were quite stable for the first 12 h but with an increase at the 24 h time point that continued to the 48 h time point. The most pronounced change was found for the circumferential muscle layer (p h after creating the obstruction.

Turn by Turn Measurements at the KEK-ATF

CERN Document Server

Renier, Y; Tomas, R; Wendt, M; Eddy, N; Kubo, K; Kuroda, S; Naito, T; Okugi, T; Terunuma, N; Urakawa, J

2013-01-01

The ATF damping ring has been upgraded with new read-out electronics for the beam position monitors (BPM), capable to acquire the beam orbits on a turn-by-turn basis, as well as in a high resolution averaging mode. The new BPM system allows to improve optic corrections and to achieve an even smaller vertical emittance (<2pm). Experimental results are presented based on turn-by-turn beam orbit measurements in the ring, for estimating the β functions and dispersion along the lattice. A fast method to measure spectral line amplitude in a few turns is also presented, including the evaluation of chromaticity.

Anticipation in turn-taking: mechanisms and information sources.

Science.gov (United States)

Riest, Carina; Jorschick, Annett B; de Ruiter, Jan P

2015-01-01

During conversations participants alternate smoothly between speaker and hearer roles with only brief pauses and overlaps. There are two competing types of accounts about how conversationalists accomplish this: (a) the signaling approach and (b) the anticipatory ('projection') approach. We wanted to investigate, first, the relative merits of these two accounts, and second, the relative contribution of semantic and syntactic information to the timing of next turn initiation. We performed three button-press experiments using turn fragments taken from natural conversations to address the following questions: (a) Is turn-taking predominantly based on anticipation or on reaction, and (b) what is the relative contribution of semantic and syntactic information to accurate turn-taking. In our first experiment we gradually manipulated the information available for anticipation of the turn end (providing information about the turn end in advance to completely removing linguistic information). The results of our first experiment show that the distribution of the participants' estimation of turn-endings for natural turns is very similar to the distribution for pure anticipation. We conclude that listeners are indeed able to anticipate a turn-end and that this strategy is predominantly used in turn-taking. In Experiment 2 we collected purely reacted responses. We used the distributions from Experiments 1 and 2 together to estimate a new dependent variable called Reaction Anticipation Proportion. We used this variable in our third experiment where we manipulated the presence vs. absence of semantic and syntactic information by low-pass filtering open-class and closed class words in the turn. The results suggest that for turn-end anticipation, both semantic and syntactic information are needed, but that the semantic information is a more important anticipation cue than syntactic information.

The Third Turn toward the Social: Nancy Welch's "Living Room," Tony Scott's "Dangerous Writing," and Rhetoric and Composition's Turn toward Grassroots Political Activism

Science.gov (United States)

Kinney, Kelly; Girshin, Thomas; Bowlin, Barrett

2013-01-01

This review essay examines recent texts by Nancy Welch and Tony Scott, both of which use embodied activism as a starting point for their inquiries. Taken together, these works point to a distinct shift in composition studies' turn toward the social, one that calls on workers both within and outside the academy to actively engage in grassroots…

INTERSECTION DETECTION BASED ON QUALITATIVE SPATIAL REASONING ON STOPPING POINT CLUSTERS

Directory of Open Access Journals (Sweden)

S. Zourlidou

2016-06-01

Full Text Available The purpose of this research is to propose and test a method for detecting intersections by analysing collectively acquired trajectories of moving vehicles. Instead of solely relying on the geometric features of the trajectories, such as heading changes, which may indicate turning points and consequently intersections, we extract semantic features of the trajectories in form of sequences of stops and moves. Under this spatiotemporal prism, the extracted semantic information which indicates where vehicles stop can reveal important locations, such as junctions. The advantage of the proposed approach in comparison with existing turning-points oriented approaches is that it can detect intersections even when not all the crossing road segments are sampled and therefore no turning points are observed in the trajectories. The challenge with this approach is that first of all, not all vehicles stop at the same location – thus, the stop-location is blurred along the direction of the road; this, secondly, leads to the effect that nearby junctions can induce similar stop-locations. As a first step, a density-based clustering is applied on the layer of stop observations and clusters of stop events are found. Representative points of the clusters are determined (one per cluster and in a last step the existence of an intersection is clarified based on spatial relational cluster reasoning, with which less informative geospatial clusters, in terms of whether a junction exists and where its centre lies, are transformed in more informative ones. Relational reasoning criteria, based on the relative orientation of the clusters with their adjacent ones are discussed for making sense of the relation that connects them, and finally for forming groups of stop events that belong to the same junction.

Optimization of cutting parameters for machining time in turning process

Science.gov (United States)

Mavliutov, A. R.; Zlotnikov, E. G.

2018-03-01

This paper describes the most effective methods for nonlinear constraint optimization of cutting parameters in the turning process. Among them are Linearization Programming Method with Dual-Simplex algorithm, Interior Point method, and Augmented Lagrangian Genetic Algorithm (ALGA). Every each of them is tested on an actual example – the minimization of production rate in turning process. The computation was conducted in the MATLAB environment. The comparative results obtained from the application of these methods show: The optimal value of the linearized objective and the original function are the same. ALGA gives sufficiently accurate values, however, when the algorithm uses the Hybrid function with Interior Point algorithm, the resulted values have the maximal accuracy.

Regional air pollution at a turning point.

Science.gov (United States)

Grennfelt, Peringe; Hov, Oystein

2005-02-01

The control of transboundary air pollution in Europe has been successful. Emissions of many key pollutants are decreasing and there are signs of improvements in damaged ecosystems. The strategies under development within the CAFE programme under the European Commission and the Convention on Long-range Transboundary Air Pollution (CLRTAP), aim to take regional air pollution control a large step further, in particular with respect to small particles. In this paper we highlight the new strategies but look primarily at socioeconomic trends and climate change feedbacks that may have a significant influence on the outcome of the strategies and which so far have not been considered. In particular, we point out the influence on air quality of increased summer temperatures in Europe and of increasing emissions including international shipping, outside of Europe. Taken together the further emissions reductions in Europe and the increasing background pollution, slowly cause a greying of the Northern Hemisphere troposphere rather than the traditional picture of dominant emissions in Europe and North America ('black') with much lower emission intensities elsewhere ('white'). A hemispheric approach to further combat air pollution will become necessary in Europe and elsewhere.

Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

Science.gov (United States)

Veiga, Santiago; Cala, Antonio; Frutos, Pablo González; Navarro, Enrique

2013-01-01

The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m) were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT) algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh) turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity. Key Points The underwater turn velocity is as a critical variable related to the swimmers’ level of skill in a 200 m backstroke event. Best swimmers perform faster but no longer turn segments during a 200 m backstroke event. Best swimmers maintain their turn performance throughout the 200 m backstroke event by increasing the underwater velocity

World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

Energy Technology Data Exchange (ETDEWEB)

1974-07-24

In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

Diamond turning of thermoplastic polymers

Energy Technology Data Exchange (ETDEWEB)

Smith, E.; Scattergood, R.O.

1988-12-01

Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

A Turning Point in the Translation of Shakespeare into Catalan: The Case of Josep M. De Sagarra’s Macbeth

Directory of Open Access Journals (Sweden)

Berjaga Vanessa Palomo

2017-12-01

Full Text Available Josep Maria de Sagarra translated twenty-eight of Shakespeare’s plays into Catalan in the early forties, at a time when Catalan language and culture were suffering severe repression due to Franco’s regime. The manuscript of Macbeth by Sagarra is from 1942; and the first edition (an impressive hard-bound clandestine edition is from 1946 or 1947. Before his translation, there were three other Catalan translations of Macbeth, produced by Cebrià Montoliu (1907, Diego Ruiz (1908 and Cèsar August Jordana (1928. The main purpose of this article is to show that Sagarra’s translations marked a turning point regarding the translation of Shakespeare’s works in Catalan culture. This is done by reflecting on both cultural and personal circumstances that led Sagarra to translate Shakespeare and by comparing Sagarra’s translation of Macbeth with the other three from the first half of the twentieth century.

First turn simulations in the cooler synchrotron COSY

International Nuclear Information System (INIS)

Dinev, D.

1991-07-01

This paper is devoted to the first turn correction and related problems in particle accelerators of synchrotron type. The paper consists of two parts. The first part is a survey of the existing methods for first turn steering. The second part is entirely devoted to the first turn in the cooler synchrotron COSY which is under assembling in KFA-Julich, Germany. (orig.)

EU ECONOMIC GOVERNANCE REFORM: ARE WE AT A TURNING POINT?

Directory of Open Access Journals (Sweden)

Daniel Daianu

2011-03-01

Full Text Available The sovereign debt crisis is creating enormous anguish in the European Monetary Union (EMU. Not surprisingly, emergency measures continue to be used at a time when a sort of economic recovery seems to be underway. Against this background the European Council summit of last October considered a Task Force report with a telling name: "Strengthening economic governance in the EU". This document is to be examined in conjunction with the governance reform proposals issued by the European Commission at the end of September and related documents. For the depth of this financial crisis and the "Great Recession" have forced EU governments and EU institutions to take a hard look at the governance structure of the Union. But it would be wrong to say that this demarche is an attempt to explore a terra incognita. From the very beginning of the European Monetary Union (EMU there was some discomfort with its institutional underpinnings and there were misgivings regarding its optimality as a currency area. This explains why a train of thought underlines a political rationale, too, for the creation of the EMU. Likewise, criticism regarding the way regulation and supervision have been established in the Union is not of recent vintage. And insufficiencies of the Stability and Growth Pact (SGP, with almost all member states flouting its rules at various points in time, have been repeatedly pointed out. This said, however, the flaws of financial intermediation have been less tackled by policy-makers and central bankers for reasons which, partially, are to be found in a paradigm which has dominated economic thinking in recent decades. This paper focuses on roots of the huge strain in the EU (EMU and main policy issues ensuing from the current crisis. It also looks at the stake NMSs have in a reformed EU economic governance structure. The challenges for EU economic governance reform are to be seen from a broad perspective: the crisis of the financial intermediation

Modeling fixation locations using spatial point processes.

Science.gov (United States)

Barthelmé, Simon; Trukenbrod, Hans; Engbert, Ralf; Wichmann, Felix

2013-10-01

Whenever eye movements are measured, a central part of the analysis has to do with where subjects fixate and why they fixated where they fixated. To a first approximation, a set of fixations can be viewed as a set of points in space; this implies that fixations are spatial data and that the analysis of fixation locations can be beneficially thought of as a spatial statistics problem. We argue that thinking of fixation locations as arising from point processes is a very fruitful framework for eye-movement data, helping turn qualitative questions into quantitative ones. We provide a tutorial introduction to some of the main ideas of the field of spatial statistics, focusing especially on spatial Poisson processes. We show how point processes help relate image properties to fixation locations. In particular we show how point processes naturally express the idea that image features' predictability for fixations may vary from one image to another. We review other methods of analysis used in the literature, show how they relate to point process theory, and argue that thinking in terms of point processes substantially extends the range of analyses that can be performed and clarify their interpretation.

BetaTPred: prediction of beta-TURNS in a protein using statistical algorithms.

Science.gov (United States)

Kaur, Harpreet; Raghava, G P S

2002-03-01

beta-turns play an important role from a structural and functional point of view. beta-turns are the most common type of non-repetitive structures in proteins and comprise on average, 25% of the residues. In the past numerous methods have been developed to predict beta-turns in a protein. Most of these prediction methods are based on statistical approaches. In order to utilize the full potential of these methods, there is a need to develop a web server. This paper describes a web server called BetaTPred, developed for predicting beta-TURNS in a protein from its amino acid sequence. BetaTPred allows the user to predict turns in a protein using existing statistical algorithms. It also allows to predict different types of beta-TURNS e.g. type I, I', II, II', VI, VIII and non-specific. This server assists the users in predicting the consensus beta-TURNS in a protein. The server is accessible from http://imtech.res.in/raghava/betatpred/

Fixed point algebras for easy quantum groups

DEFF Research Database (Denmark)

Gabriel, Olivier; Weber, Moritz

2016-01-01

Compact matrix quantum groups act naturally on Cuntz algebras. The first author isolated certain conditions under which the fixed point algebras under this action are Kirchberg algebras. Hence they are completely determined by their K-groups. Building on prior work by the second author,we prove...... that free easy quantum groups satisfy these conditions and we compute the K-groups of their fixed point algebras in a general form. We then turn to examples such as the quantum permutation group S+ n,the free orthogonal quantum group O+ n and the quantum reflection groups Hs+ n. Our fixed point......-algebra construction provides concrete examples of free actions of free orthogonal easy quantum groups,which are related to Hopf-Galois extensions....

Turn stability in beta-hairpin peptides: Investigation of peptides containing 3:5 type I G1 bulge turns.

Science.gov (United States)

Blandl, Tamas; Cochran, Andrea G; Skelton, Nicholas J

2003-02-01

The turn-forming ability of a series of three-residue sequences was investigated by substituting them into a well-characterized beta-hairpin peptide. The starting scaffold, bhpW, is a disulfide-cyclized 10-residue peptide that folds into a stable beta-hairpin with two antiparallel strands connected by a two-residue reverse turn. Substitution of the central two residues with the three-residue test sequences leads to less stable hairpins, as judged by thiol-disulfide equilibrium measurements. However, analysis of NMR parameters indicated that each molecule retains a significant folded population, and that the type of turn adopted by the three-residue sequence is the same in all cases. The solution structure of a selected peptide with a PDG turn contained an antiparallel beta-hairpin with a 3:5 type I + G1 bulge turn. Analysis of the energetic contributions of individual turn residues in the series of peptides indicates that substitution effects have significant context dependence, limiting the predictive power of individual amino acid propensities for turn formation. The most stable and least stable sequences were also substituted into a more stable disulfide-cyclized scaffold and a linear beta-hairpin scaffold. The relative stabilities remained the same, suggesting that experimental measurements in the bhpW context are a useful way to evaluate turn stability for use in protein design projects. Moreover, these scaffolds are capable of displaying a diverse set of turns, which can be exploited for the mimicry of protein loops or for generating libraries of reverse turns.

Validation of intermediate end points in cancer research.

Science.gov (United States)

Schatzkin, A; Freedman, L S; Schiffman, M H; Dawsey, S M

1990-11-21

Investigations using intermediate end points as cancer surrogates are quicker, smaller, and less expensive than studies that use malignancy as the end point. We present a strategy for determining whether a given biomarker is a valid intermediate end point between an exposure and incidence of cancer. Candidate intermediate end points may be selected from case series, ecologic studies, and animal experiments. Prospective cohort and sometimes case-control studies may be used to quantify the intermediate end point-cancer association. The most appropriate measure of this association is the attributable proportion. The intermediate end point is a valid cancer surrogate if the attributable proportion is close to 1.0, but not if it is close to 0. Usually, the attributable proportion is close to neither 1.0 nor 0; in this case, valid surrogacy requires that the intermediate end point mediate an established exposure-cancer relation. This would in turn imply that the exposure effect would vanish if adjusted for the intermediate end point. We discuss the relative advantages of intervention and observational studies for the validation of intermediate end points. This validation strategy also may be applied to intermediate end points for adverse reproductive outcomes and chronic diseases other than cancer.

Calibration of Relative Humidity Sensors using a Dew Point Generator

OpenAIRE

Brooks, Milo

2010-01-01

A relative humidity sensor can be calibrated using a dew point generator to continuously supply an air stream of known constant humidity and a temperature chamber to control the dew point and ambient temperature.

An integrative relational point of view.

Science.gov (United States)

Wachtel, Paul L

2014-09-01

This article, part of a special section on the Relational Foundations of Psychotherapy, describes a particular relational approach called cyclical psychodynamics. Cyclical psychodynamics is rooted both in the relational perspective in psychoanalysis and in an integrative melding of psychodynamic, cognitive-behavioral, systemic, and experiential points of view. Central to its theoretical structure is a focus on the vicious and virtuous circles that perpetuate (or contribute to changing) personality patterns that may have originated in childhood but that persist because they often generate the very feedback from others that is necessary to keep them going. As a consequence of this latter focus, the relational foundation of cyclical psychodynamic therapy addresses in equal and dynamically reciprocal fashion both the therapeutic relationship in the consulting room and the key relationships outside the consulting room that play an essential role in the maintenance or change of the problematic patterns the person has come to therapy to work on. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Prediction and analysis of beta-turns in proteins by support vector machine.

Science.gov (United States)

Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

2003-01-01

Tight turn has long been recognized as one of the three important features of proteins after the alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns. Analysis and prediction of beta-turns in particular and tight turns in general are very useful for the design of new molecules such as drugs, pesticides, and antigens. In this paper, we introduce a support vector machine (SVM) approach to prediction and analysis of beta-turns. We have investigated two aspects of applying SVM to the prediction and analysis of beta-turns. First, we developed a new SVM method, called BTSVM, which predicts beta-turns of a protein from its sequence. The prediction results on the dataset of 426 non-homologous protein chains by sevenfold cross-validation technique showed that our method is superior to the other previous methods. Second, we analyzed how amino acid positions support (or prevent) the formation of beta-turns based on the "multivariable" classification model of a linear SVM. This model is more general than the other ones of previous statistical methods. Our analysis results are more comprehensive and easier to use than previously published analysis results.

Support vector machines for prediction and analysis of beta and gamma-turns in proteins.

Science.gov (United States)

Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

2005-04-01

Tight turns have long been recognized as one of the three important features of proteins, together with alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns and most of the rest are gamma-turns. Analysis and prediction of beta-turns and gamma-turns is very useful for design of new molecules such as drugs, pesticides, and antigens. In this paper we investigated two aspects of applying support vector machine (SVM), a promising machine learning method for bioinformatics, to prediction and analysis of beta-turns and gamma-turns. First, we developed two SVM-based methods, called BTSVM and GTSVM, which predict beta-turns and gamma-turns in a protein from its sequence. When compared with other methods, BTSVM has a superior performance and GTSVM is competitive. Second, we used SVMs with a linear kernel to estimate the support of amino acids for the formation of beta-turns and gamma-turns depending on their position in a protein. Our analysis results are more comprehensive and easier to use than the previous results in designing turns in proteins.

Zero-point energy in early quantum theory

International Nuclear Information System (INIS)

Milonni, P.W.; Shih, M.-L.

1991-01-01

In modern physics the vacuum is not a tranquil void but a quantum state with fluctuations having observable consequences. The present concept of the vacuum has its roots in the zero-point energy of harmonic oscillators and the electromagnetic field, and arose before the development of the formalism of quantum mechanics. This article discusses these roots in the blackbody research of Planck and Einstein in 1912--1913, and the relation to Bose--Einstein statistics and the first indication of wave--particle duality uncovered by Einstein's fluctuation formula. Also considered are the Einstein--Stern theory of specific heats, which invoked zero-point energy in a way which turned out to be incorrect, and the experimental implications of zero-point energy recognized by Mulliken and Debye in vibrational spectroscopy and x-ray diffraction

Obtaining Glenoid Positioning Data from Scapular Palpable Points In Vitro

Directory of Open Access Journals (Sweden)

Jordan H. Trafimow

2013-01-01

Full Text Available Both clinical and biomechanical problems affecting the shoulder joint suggest that investigators should study force transmission into and out from the scapula. To analyze force transmission between the humeral head and the glenoid, one must know the position of the glenoid. Studies have analyzed the position of the scapula from the positions of three palpable points, but the position of the glenoid relative to three palpable points has not been studied. Dry scapulae ( were subjected to X-rays and a critical angle, (which relates the plane determined by the three palpable points on the scapula to a plane containing the glenoid center and the first two palpable points was calculated. The mean value for was degrees. The obtained allows us to determine the position of the glenoid from three palpable points. This information could be used in calculation of forces across the shoulder joint, which in turn would allow optimizing the choice of strengthening exercises.

Gravitational field of massive point particle in general relativity

International Nuclear Information System (INIS)

Fiziev, P.P.

2003-10-01

Using various gauges of the radial coordinate we give a description of the static spherically symmetric space-times with point singularity at the center and vacuum outside the singularity. We show that in general relativity (GR) there exist infinitely many such solutions to the Einstein equations which are physically different and only some of them describe the gravitational field of a single massive point particle. In particular, we show that the widespread Hilbert's form of Schwarzschild solution does not solve the Einstein equations with a massive point particle's stress-energy tensor. Novel normal coordinates for the field and a new physical class of gauges are proposed, in this way achieving a correct description of a point mass source in GR. We also introduce a gravitational mass defect of a point particle and determine the dependence of the solutions on this mass defect. In addition we give invariant characteristics of the physically and geometrically different classes of spherically symmetric static space-times created by one point mass. (author)

The Translator's Turn: in the Cultural Turn

Institute of Scientific and Technical Information of China (English)

徐玮玮

2003-01-01

@@ Introduction: Douglas Robinson rose to the defense of the " atheoretical" American literary translator in The Translator's Turn (1991). Here, I borrowed the title from him, but I will write my paper in the thought of the translator's role in translating. In his book, Robinson argued that the literary translator embodies an integration of feeling and thought, of intuition and systematization. In analyzing the " turn" that the translator take from the source text to the target text, Robinson offered a " dialogical" model, that is the translator's dialogical engagement with the source language and with the ethic of the target language. Robinson allows for the translator to intervene, subvert, divert, even entertain, emphasizing the creative aspect of literary translation. The translation linguists, scientists, and philosophers have had their chance at translation theory; now it is time, he argued, for the literary translators to have their " turn".

Simulation of growing grains under orientation relation - dependent quadruple point dragging

International Nuclear Information System (INIS)

Ito, K

2015-01-01

The growth behaviour of a specified grain embedded in matrix grains, for which the migration mobility of the quadruple points depended on the relation between the orientations of the growing and shrinking grains, was studied using a modified Potts MC-type threedimensional simulation. Large embedded grains continued to grow without being overcome by coarsening matrix grains, whereas small embedded grains disappeared, under the influence of the relative mobilities of the quadruple points, the composition of the matrix grain texture and the width of the grain size distribution of the matrix grains. These results indicate that orientation relation-dependent quadruple point dragging can affect the recrystallization texture during the grain coarsening stage. (paper)

Review Essay: Turn, Turn, Turn Around—Till Categories Blur

Directory of Open Access Journals (Sweden)

Lars Allolio-Näcke

2008-01-01

Full Text Available I begin this review by introducing the book and discussing its manifest content chapter by chapter (see 2.1, focusing particularly on the author's argumentation concerning the development of new orientations in cultural studies and on how, in relation to the turns discussed, the names of the researchers and central categories involved are collected. In a second step, I give a close reading of the book's latent content, which I consider to be more important (see 2.2. In this context I discuss several questions of scientific politics—especially the issue of hegemonic claims. Thirdly, I read the book from the critical standpoint of a psychologist, a sociologist and a theologian and show the shortcomings of BACHMANN-MEDICK's outsider perspective on these disciplines. In this regard I read the book again and provide a critique of the quality of the author's scientific performance (see 3. Finally, I state the reasons I do not recommend reading this book (see 4. URN: urn:nbn:de:0114-fqs0801266

Conformational interconversions in peptide beta-turns: analysis of turns in proteins and computational estimates of barriers.

Science.gov (United States)

Gunasekaran, K; Gomathi, L; Ramakrishnan, C; Chandrasekhar, J; Balaram, P

1998-12-18

The two most important beta-turn features in peptides and proteins are the type I and type II turns, which differ mainly in the orientation of the central peptide unit. Facile conformational interconversion is possible, in principle, by a flip of the central peptide unit. Homologous crystal structures afford an opportunity to structurally characterize both possible conformational states, thus allowing identification of sites that are potentially stereochemically mobile. A representative data set of 250 high-resolution (turns that are assigned different conformational types (type I/type II) in related structures. A total of 55 examples of beta-turns were identified as possible candidates for a stereochemically mobile site. Of the 55 examples, 45 could be classified as a potential site for interconversion between type I and type II beta-turns, while ten correspond to flips from type I' to type II' structures. As a further check, the temperature factors of the central peptide unit carbonyl oxygen atom of the 55 examples were examined. The analysis reveals that the turn assignments are indeed reliable. Examination of the secondary structures at the flanking positions of the flippable beta-turns reveals that seven examples occur in the loop region of beta-hairpins, indicating that the formation of ordered secondary structures on either side of the beta-turn does not preclude local conformational variations. In these beta-turns, Pro (11 examples), Lys (nine examples) and Ser (seven examples) were most often found at the i+1 position. Glycine was found to occur overwhelmingly at position i+2 (28 examples), while Ser (seven examples) and Asn (six examples) were amongst the most frequent residues. Activation energy barriers for the interconversion between type I and type II beta-turns were computed using the peptide models Ac-Pro-Aib-NHMe and Ac-Pro-Gly-NHMe within the framework of the AM1 semi-empirical molecular orbital procedure. In order to have a uniform basis for

World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

Energy Technology Data Exchange (ETDEWEB)

1974-07-24

In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

Increasing protein stability by improving beta-turns.

Science.gov (United States)

Fu, Hailong; Grimsley, Gerald R; Razvi, Abbas; Scholtz, J Martin; Pace, C Nick

2009-11-15

Our goal was to gain a better understanding of how protein stability can be increased by improving beta-turns. We studied 22 beta-turns in nine proteins with 66-370 residues by replacing other residues with proline and glycine and measuring the stability. These two residues are statistically preferred in some beta-turn positions. We studied: Cold shock protein B (CspB), Histidine-containing phosphocarrier protein, Ubiquitin, Ribonucleases Sa2, Sa3, T1, and HI, Tryptophan synthetase alpha-subunit, and Maltose binding protein. Of the 15 single proline mutations, 11 increased stability (Average = 0.8 +/- 0.3; Range = 0.3-1.5 kcal/mol), and the stabilizing effect of double proline mutants was additive. On the basis of this and our previous work, we conclude that proteins can generally be stabilized by replacing nonproline residues with proline residues at the i + 1 position of Type I and II beta-turns and at the i position in Type II beta-turns. Other turn positions can sometimes be used if the phi angle is near -60 degrees for the residue replaced. It is important that the side chain of the residue replaced is less than 50% buried. Identical substitutions in beta-turns in related proteins give similar results. Proline substitutions increase stability mainly by decreasing the entropy of the denatured state. In contrast, the large, diverse group of proteins considered here had almost no residues in beta-turns that could be replaced by Gly to increase protein stability. Improving beta-turns by substituting Pro residues is a generally useful way of increasing protein stability. 2009 Wiley-Liss, Inc.

Lattice modeling and calibration with turn-by-turn orbit data

Directory of Open Access Journals (Sweden)

Xiaobiao Huang

2010-11-01

Full Text Available A new method that explores turn-by-turn beam position monitor (BPM data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

Lattice modeling and calibration with turn-by-turn orbit data

Science.gov (United States)

Huang, Xiaobiao; Sebek, Jim; Martin, Don

2010-11-01

A new method that explores turn-by-turn beam position monitor (BPM) data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

The complexity of interior point methods for solving discounted turn-based stochastic games

DEFF Research Database (Denmark)

Hansen, Thomas Dueholm; Ibsen-Jensen, Rasmus

2013-01-01

for general 2TBSGs. This implies that a number of interior point methods can be used to solve 2TBSGs. We consider two such algorithms: the unified interior point method of Kojima, Megiddo, Noma, and Yoshise, and the interior point potential reduction algorithm of Kojima, Megiddo, and Ye. The algorithms run...... states and discount factor γ we get κ=Θ(n(1−γ)2) , −δ=Θ(n√1−γ) , and 1/θ=Θ(n(1−γ)2) in the worst case. The lower bounds for κ, − δ, and 1/θ are all obtained using the same family of deterministic games....

Integrated CMOS dew point sensors for relative humidity measurement

Science.gov (United States)

Savalli, Nicolo; Baglio, Salvatore; Castorina, Salvatore; Sacco, Vincenzo; Tringali, Cristina

2004-07-01

This work deals with the development of integrated relative humidity dew point sensors realized by adopting standard CMOS technology for applications in various fields. The proposed system is composed by a suspended plate that is cooled by exploiting integrated Peltier cells. The cold junctions of the cells have been spread over the plate surface to improve the homogeneity of the temperature distribution over its surface, where cooling will cause the water condensation. The temperature at which water drops occur, named dew point temperature, is a function of the air humidity. Measurement of such dew point temperature and the ambient temperature allows to know the relative humidity. The detection of water drops is achieved by adopting a capacitive sensing strategy realized by interdigited fixed combs, composed by the upper layer of the adopted process. Such a capacitive sensor, together with its conditioning circuit, drives a trigger that stops the cooling of the plate and enables the reading of the dew point temperature. Temperature measurements are achieved by means of suitably integrated thermocouples. The analytical model of the proposed system has been developed and has been used to design a prototype device and to estimate its performances. In such a prototype, the thermoelectric cooler is composed by 56 Peltier cells, made by metal 1/poly 1 junctions. The plate has a square shape with 200 μm side, and it is realized by exploiting the oxide layers. Starting from the ambient temperature a temperature variation of ΔT = 15 K can be reached in 10 ms thus allowing to measure a relative humidity greater than 40%.

Compensations for increased rotational inertia during human cutting turns.

Science.gov (United States)

Qiao, Mu; Brown, Brian; Jindrich, Devin L

2014-02-01

Locomotion in a complex environment is often not steady state, but unsteady locomotion (stability and maneuverability) is not well understood. We investigated the strategies used by humans to perform sidestep cutting turns when running. Previous studies have argued that because humans have small yaw rotational moments of inertia relative to body mass, deceleratory forces in the initial velocity direction that occur during the turning step, or 'braking' forces, could function to prevent body over-rotation during turns. We tested this hypothesis by increasing body rotational inertia and testing whether braking forces during stance decreased. We recorded ground reaction force and body kinematics from seven participants performing 45 deg sidestep cutting turns and straight running at five levels of body rotational inertia, with increases up to fourfold. Contrary to our prediction, braking forces remained consistent at different rotational inertias, facilitated by anticipatory changes to body rotational speed. Increasing inertia revealed that the opposing effects of several turning parameters, including rotation due to symmetrical anterior-posterior forces, result in a system that can compensate for fourfold changes in rotational inertia with less than 50% changes to rotational velocity. These results suggest that in submaximal effort turning, legged systems may be robust to changes in morphological parameters, and that compensations can involve relatively minor adjustments between steps to change initial stance conditions.

The third turning point: Community college movement

Directory of Open Access Journals (Sweden)

Filipović Mirko

2012-01-01

Full Text Available Traditional American higher education system, that once was adequate for education of social elite, had to adapt, after the Second World War, to the new wave of students who would occupy middle level and relatively powerless jobs in growing corporate economy and public sector. The Community College Movement was an adequate response to the need for legitimating the new social stratification through school credentials, to the demands of minorities and lower classes youth for ever widening access to higher education, and to the demand for professionalization of some occupational groups aspiring to achieve higher social status. Through class based channeling and educational inflation, higher educational system contributes, in its own way, to preserve the existing patterns of social inequalities.

Mimicry by asx- and ST-turns of the four main types of beta-turn in proteins.

Science.gov (United States)

Duddy, William J; Nissink, J Willem M; Allen, Frank H; Milner-White, E James

2004-11-01

Hydrogen-bonded beta-turns in proteins occur in four categories: type I (the most common), type II, type II', and type I'. Asx-turns resemble beta-turns, in that both have an NH. . .OC hydrogen bond forming a ring of 10 atoms. Serine and threonine side chains also commonly form hydrogen-bonded turns, here called ST-turns. Asx-turns and ST-turns can be categorized into four classes, based on side chain rotamers and the conformation of the central turn residue, which are geometrically equivalent to the four types of beta-turns. We propose asx- and ST-turns be named using the type I, II, I', and II' beta-turn nomenclature. Using this, the frequency of occurrence of both asx- and ST-turns is: type II' > type I > type II > type I', whereas for beta-turns it is type I > type II > type I' > type II'. Almost all type II asx-turns occur as a recently described three residue feature named an asx-nest.

Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments

Directory of Open Access Journals (Sweden)

P. C. Mishra

2015-09-01

Full Text Available Turning experiments were carried out on AA 7075/SiC composite workpiece in dry and spray cooling environments based on L16 Taguchi design of experiments. Multiple performance optimization of process parameters was performed using grey relational analysis. The performance characteristics considered were average surface roughness, cutting tool temperature and material removal rate. Uncoated carbide inserts were used for machining the workpiece in a high speed precision lathe. A grey relational grade obtained from grey relational analysis was used to optimize the process parameters. Optimal combination of process parameters was then determined by the Taguchi method using the grey relational grade as the performance index. Experimental results indicated that the turning in spray cooling environment was beneficial compared to that in dry environment for the quality response characteristics under consideration. Analysis of variance showed that feed was the most significant parameter for the multiple performance characteristics during turning in both the environments.

Induced fluid rotation and bistable fluidic turn-down valves (a survey

Directory of Open Access Journals (Sweden)

Tesař Václav

2015-01-01

Full Text Available Paper surveys engineering applications of an unusual fluidic principle — momentum transfer through a relatively small communicating window into a vortex chamber, where the initially stationary fluid is put into rotation. The transfer is often by shear stress acting in the window plane, but may be enhanced and perhaps even dominated by fluid flow crossing the boundary. The case of zero-time-mean fluid transport through the window has found use in experimental fluid mechanics: non-invasive measurement of wall shear stress on objects by evaluating the induced rotation in the vortex chamber. The case with the non-zero flow through the interface became the starting point in development of fluidic valves combining two otherwise mutually incompatible properties: bistability and flow turning down.

Turning for Ulcer Reduction (TURN) Study: An Economic Analysis.

Science.gov (United States)

Paulden, Mike; Bergstrom, Nancy; Horn, Susan D; Rapp, Mary; Stern, Anita; Barrett, Ryan; Watkiss, Michael; Krahn, Murray

2014-01-01

The Turning for Ulcer Reduction (TURN) study was a multisite, randomized controlled trial that aimed to determine the optimal frequency of turning nursing facility residents with mobility limitations who are at moderate and high risk for pressure ulcer (PrU) development. Here we present data from the economic analysis. This economic analysis aims to estimate the economic consequences for Ontario of switching from a repositioning schedule of 2-hour intervals to a schedule of 3-hour or 4-hour intervals. Costs considered in the analysis included those associated with nursing staff time spent repositioning residents and with incontinent care supplies, which included briefs, barrier cream, and washcloths. The total economic benefit of switching to 3-hour or 4-hour repositioning is estimated to be $11.05 or $16.74 per day, respectively, for every resident at moderate or high risk of developing PrUs. For a typical facility with 123 residents, 41 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefit is estimated to be $453 daily for 3-hour or $686 daily for 4-hour repositioning. For Ontario as a whole, assuming that there are 77,933 residents at 634 LTC facilities, 25,927 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefits of switching to 3-hour or 4-hour repositioning are estimated to be $286,420 or $433,913 daily, respectively, equivalent to $104.5 million or $158.4 million per year. We did not consider the savings the Ontario Ministry of Health and Long-Term Care might incur should less frequent repositioning reduce the incidence of work-related injury among nursing staff, so our findings are potentially conservative. A switch to 3-hour or 4-hour repositioning appears likely to yield substantial economic benefits to Ontario without placing residents at greater risk of developing PrUs.

Method to minimize the low-frequency neutral-point voltage oscillations with time-offset injection for neutral-point-clamped inverters

DEFF Research Database (Denmark)

Choi, Uimin; Lee, Kyo-Beum; Blaabjerg, Frede

2013-01-01

This paper proposes a method to reduce the low-frequency neutral-point voltage oscillations. The neutral-point voltage oscillations are considerably reduced by adding a time-offset to the three phase turn-on times. The proper time-offset is simply calculated considering the phase currents and dwell...

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

Close pairs of relative equilibria for identical point vortices

DEFF Research Database (Denmark)

Dirksen, Tobias; Aref, Hassan

2011-01-01

Numerical solution of the classical problem of relative equilibria for identical point vortices on the unbounded plane reveals configurations that are very close to the analytically known, centered, symmetrically arranged, nested equilateral triangles. New numerical solutions of this kind are fou...

Unsupported or Turned Against: Understanding How Two Types of Negative Social Reactions to Sexual Assault Relate to Post-Assault Outcomes.

Science.gov (United States)

Relyea, Mark; Ullman, Sarah

2015-03-01

Social reactions to disclosures of sexual assault have significant effects on women's post-assault outcomes (see Ullman, 2010, for a review). The Social Reactions Questionnaire (SRQ; Ullman, 2000) measures these reactions (as reported by survivors) and aggregates them into positive and negative scales. However, studies indicate that only some "negative" reactions have a negative valence for survivors whereas others produce a mixed (positive and negative) valence. The current study compares a one-primary-factor model of "negative reactions" to a model with two primary factors that we have labeled "turning against" and "unsupportive acknowledgement." Results showed that although one primary factor was plausible, two primary factors provided a better fit to the data. To assess the discriminant validity of the two factors, we performed regressions predicting social support, psychological adjustment, and coping behaviors. Analyses supported the hypotheses that reactions of being turned against were related to social withdrawal, increased self-blame, and decreased sexual assertiveness whereas reactions of unsupportive acknowledgment were related to both adaptive and maladaptive coping. Against predictions, depression and PTSD were more related to receiving unsupportive acknowledgment than to receiving turning against reactions. Implications for interventions and research are discussed. Importantly, almost all women (94%) in our sample received reactions that acknowledged that an assault occurred but failed to provide support, and this lack of support was associated with worse coping than even more hostile reactions such as being blamed or stigmatized. Therefore, there seems a great need for effective programs to train community members to respond to survivors with the kind of emotional and tangible support that promotes better outcomes.

Turning a page of Agency history

Energy Technology Data Exchange (ETDEWEB)

NONE

1969-07-01

Recent developments, and especially the new and critical interest of developing countries, have helped to mark the turning of a page in the Agency's history. If the present situation in the economics of nuclear power does not change there is a danger that developing countries will lag further and further behind the advanced countries in its use. Shortage of resources impose a brake on Agency efforts to promote benefits of nuclear techniques, especially by technical assistance. These were some of the points made by Dr. Sigvard Eklund, the Director General, when he presented the Agency's annual report to the Economic and Social Council (ECOSOC) in July. (author)

ROK-U.S. Security Relations: The China Factor and a Turning Point

National Research Council Canada - National Science Library

Kim, Sung

2002-01-01

... to maintaining a tight alliance relationship between Seoul and Washington during the Cold War era, the recently increasing importance of China in South Korea's strategic calculations has become a major...

New Analysis of Solute Drag in AA5754 by Precise Determination of Point Defect Generation and the Orowan Relation

Science.gov (United States)

Diak, Brad J.; Penlington, Alex; Saimoto, Shig

Serrated deformation in Al-Mg alloys creates problems that affect consumer product acceptability. This effect is usually attributed to the Portevin-LeChâtelier effect. In this study the inverse PLC effect due to solute drag on moving dislocations is examined in AA5754. The drag mechanism is dependent on the diffusivity of the solute which is in-turn dependent on the point defect evolution during deformation. Experimental determination of the parabolic James-Barnett drag profile by strain rate change experiments indicates the peak stress is centered at 1.5×10-9m/s, which requires a mechanical formation energy for vacancies of 0.4eV/at. A new slip-based constitutive relation was used to determine the evolution of vacancy volume fraction with deformation with strain, which is greater than the volume fraction of vacancies predicted by the solute drag profile.

Vehicle kinematics in turns and the role of cornering lamps in driver vision.

Science.gov (United States)

2010-11-01

"SAE Recommended Practice J852 and ECE Regulations 119 and 48 for cornering lamps : were compared. Photometric points described in each specification were then compared : to naturalistic low-speed turn trajectories produced by 87 drivers. Future loca...

Fast Semantic Segmentation of 3d Point Clouds with Strongly Varying Density

Science.gov (United States)

Hackel, Timo; Wegner, Jan D.; Schindler, Konrad

2016-06-01

We describe an effective and efficient method for point-wise semantic classification of 3D point clouds. The method can handle unstructured and inhomogeneous point clouds such as those derived from static terrestrial LiDAR or photogammetric reconstruction; and it is computationally efficient, making it possible to process point clouds with many millions of points in a matter of minutes. The key issue, both to cope with strong variations in point density and to bring down computation time, turns out to be careful handling of neighborhood relations. By choosing appropriate definitions of a point's (multi-scale) neighborhood, we obtain a feature set that is both expressive and fast to compute. We evaluate our classification method both on benchmark data from a mobile mapping platform and on a variety of large, terrestrial laser scans with greatly varying point density. The proposed feature set outperforms the state of the art with respect to per-point classification accuracy, while at the same time being much faster to compute.

Bilinear Relative Equilibria of Identical Point Vortices

DEFF Research Database (Denmark)

Aref, H.; Beelen, Peter; Brøns, Morten

2012-01-01

, obtained using Sturm’s comparison theorem, is that if p(z) satisfies the ODE for a given q(z) with its imaginary zeros symmetric relative to the x-axis, then it must have at least n−m+2 simple, real zeros. For m=2 this provides a complete characterization of all zeros, and we study this case in some detail....... In particular, we show that, given q(z)=z 2+η 2, where η is real, there is a unique p(z) of degree n, and a unique value of η 2=A n , such that the zeros of q(z) and p(z) form a relative equilibrium of n+2 point vortices. We show that $A_{n} \\approx\\frac{2}{3}n + \\frac{1}{2}$, as n→∞, where the coefficient of n...

Comparative Assessment of Cutting Inserts and Optimization during Hard Turning: Taguchi-Based Grey Relational Analysis

Science.gov (United States)

Venkata Subbaiah, K.; Raju, Ch.; Suresh, Ch.

2017-08-01

The present study aims to compare the conventional cutting inserts with wiper cutting inserts during the hard turning of AISI 4340 steel at different workpiece hardness. Type of insert, hardness, cutting speed, feed, and depth of cut are taken as process parameters. Taguchi’s L18 orthogonal array was used to conduct the experimental tests. Parametric analysis carried in order to know the influence of each process parameter on the three important Surface Roughness Characteristics (Ra, Rz, and Rt) and Material Removal Rate. Taguchi based Grey Relational Analysis (GRA) used to optimize the process parameters for individual response and multi-response outputs. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor.

Determination of linear optics functions from turn-by-turn data

Energy Technology Data Exchange (ETDEWEB)

Alexahin, Y; Gianfelice-Wendt, E, E-mail: alexahin@fnal.gov [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, Illinois 60510 (United States)

2011-10-15

A method for evaluation of coupled optics functions, detection of strong perturbing elements, determination of BPM calibration errors and tilts using turn-by-turn (TBT) data is presented as well as the new version of the Hamiltonian perturbation theory of betatron oscillations the method is based upon. An example of application of the considered method to the Tevatron is given.

Fast responsive fluorescence turn-on sensor for Cu{sup 2+} and its application in live cell imaging

Energy Technology Data Exchange (ETDEWEB)

Wang Jiaoliang, E-mail: wangjiaoliang@126.com [College of Chemistry and Environment Engineering, Hunan City University, Yiyang 413000 (China); Li Hao; Long Liping; Xiao Guqing; Xie Dan [College of Chemistry and Environment Engineering, Hunan City University, Yiyang 413000 (China)

2012-09-15

A new effective fluorescent sensor based on rhodamine was synthesized, which was induced by Cu{sup 2+} in aqueous media to produce turn-on fluorescence. The new sensor 1 exhibited good selectivity for Cu{sup 2+} over other heavy and transition metal (HTM) ions in H{sub 2}O/CH{sub 3}CN(7:3, v/v). Upon addition of Cu{sup 2+}, a remarkable color change from colorless to pink was easily observed by the naked eye, and the dramatic fluorescence turn-on was corroborated. Furthermore, kinetic assay indicates that sensor 1 could be used for real-time tracking of Cu{sup 2+} in cells and organisms. In addition, the turn-on fluorescent change upon the addition of Cu{sup 2+} was also applied in bioimaging. - Highlights: Black-Right-Pointing-Pointer A new effective fluorescent sensor based on rhodamine was developed to detect Cu{sup 2+}. Black-Right-Pointing-Pointer The sensor exhibited fast response, good selectivity at physiological pH condition. Black-Right-Pointing-Pointer The sensor was an effective intracellular Cu{sup 2+} ion imaging agent.

Ductile-regime turning of germanium and silicon

Science.gov (United States)

Blake, Peter N.; Scattergood, Ronald O.

1989-01-01

Single-point diamond turning of silicon and germanium was investigated in order to clarify the role of cutting depth in coaxing a ductile chip formation in normally brittle substances. Experiments based on the rapid withdrawal of the tool from the workpiece have shown that microfracture damage is a function of the effective depth of cut (as opposed to the nominal cutting depth). In essence, damage created by the leading edge of the tool is removed several revolutions later by lower sections of the tool edge, where the effective cutting depth is less. It appears that a truly ductile cutting response can be achieved only when the effective cutting depth, or critical chip thickness, is less than about 20 nm. Factors such as tool rake angle are significant in that they will affect the actual value of the critical chip thickness for transition from brittle to ductile response. It is concluded that the critical chip thickness is an excellent parameter for measuring the effects of machining conditions on the ductility of the cut and for designing tool-workpiece geometry in both turning and grinding.

Turn-around improvements

International Nuclear Information System (INIS)

Redaelli, S.; Venturini Delsolaro, W.

2012-01-01

An efficient turn-around will be an important parameter for the integrated luminosity performance at LHC in 2012, when an operation with steady beam parameters and machine configuration will be achieved at the beginning of the run. Improvements of the operational cycle were already put successfully in place after the 2010 experience but additional ways to reduce the time required to setup collisions are possible. In this paper, the 2011 turn-around performance is reviewed and the benefits of the improvements from 2010 are presented. Phases of the operational cycle when further amelioration is possible are discussed and some proposal for a faster turn-around in 2012 are outlined. (authors)

Turns prediction : Turns prediction

OpenAIRE

Fuchs, Patrick; Etchebest, Catherine; De Brevern, Alexandre

2007-01-01

The description of protein 3D structure usually focuses on the repetitive local folds (alpha-helices and beta-sheets). The remaining class, sometimes called unordered region, has often been considered as random (one also calls it ‘random coil'). However, some interesting local folds are also highly recurrent and definitely more structured than a real random region. One of such particularly interesting motif is tight turn; this latter is characterized by few residues (3 to 5) and by the revers...

1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

Ignition experiment in a single-turn-coil tokamak

International Nuclear Information System (INIS)

Carrera, R.; Driga, M.; Gully, J.H.

1989-01-01

A novel concept for a fusion ignition experiment, IGNITEX proposed along the lines of previous ideas for a compact thermonuclear device is analyzed. A single-turn-coil tokamak is analyzed. A single-turn-coil tokamak supplied by homopolar generators can ohmically heat a DT plasma to ignition conditions and maintain a thermally stable ignited phase for about ten energy confinement times. The IGNITEX experiment can provide a simple and relatively inexpensive way to produce and control ignited plasmas for scientific study

[Methodological aspects in the evaluation of turn-over and up/down sizing as indicators of work-related stress].

Science.gov (United States)

Veronesi, G; Bertù, L; Mombelli, S; Cimmino, L; Caravati, G; Conti, M; Abate, T; Ferrario, M M

2011-01-01

We discuss the methodological aspects related to the evaluation of turn-over and up-down sizing as indicators of work-related stress, in complex organizations like a university hospital. To estimate the active workers population we developed an algorithm which integrated several administrative databases. The indicators were standardized to take into account some potential confounders (age, sex, work seniority) when considering different hospital structures and job mansions. Main advantages of our method include flexibility in the choice of the analysis detail (hospital units, job mansions, a combination of both) and the possibility to describe over-time trends to measure the success of preventive strategies.

Research of remote control system in turn by turn timing system

International Nuclear Information System (INIS)

Zhan Zhifeng; Xiao Yanguo; Ma Kui; Yin Zejie; Wu Xiaoyi

2003-01-01

In this paper, we introduce a remote control system which is used in a frequency dividing and time-delay module. This control system is based on client/server architecture, and RS232 serial communication protocol. This control system is used in timing system of NSRL turn by turn beam position monitor

Uncertainty relations, zero point energy and the linear canonical group

Science.gov (United States)

Sudarshan, E. C. G.

1993-01-01

The close relationship between the zero point energy, the uncertainty relations, coherent states, squeezed states, and correlated states for one mode is investigated. This group-theoretic perspective enables the parametrization and identification of their multimode generalization. In particular the generalized Schroedinger-Robertson uncertainty relations are analyzed. An elementary method of determining the canonical structure of the generalized correlated states is presented.

Application of digital lock-in detection to Hefei Light Source turn-by-turn system

International Nuclear Information System (INIS)

Yang Yongliang; Wang Junhua; Sun Baogen; Chen Yuanbo; Zhou Zeran

2010-01-01

This paper introduces the digital lock-in detection theory and discusses its feasibility to obtain the damping rate in turn-by-turn measurement systems. Numerical simulations of this method were carried out with Matlab. Then principle presenting beam experiments were conducted on the Hefei Light Source (HLS) storage ring. The measured beta oscillation growth time is about 0.26 ms and the damping time is about 1.2 ms. Simulation and experimental results show that, the digital lock-in detection method is effective in damping rate measurement in turn-by-turn measurement systems. (authors)

Immediate Effects of Clock-Turn Strategy on the Pattern and Performance of Narrow Turning in Persons With Parkinson Disease.

Science.gov (United States)

Yang, Wen-Chieh; Hsu, Wei-Li; Wu, Ruey-Meei; Lin, Kwan-Hwa

2016-10-01

Turning difficulty is common in people with Parkinson disease (PD). The clock-turn strategy is a cognitive movement strategy to improve turning performance in people with PD despite its effects are unverified. Therefore, this study aimed to investigate the effects of the clock-turn strategy on the pattern of turning steps, turning performance, and freezing of gait during a narrow turning, and how these effects were influenced by concurrent performance of a cognitive task (dual task). Twenty-five people with PD were randomly assigned to the clock-turn or usual-turn group. Participants performed the Timed Up and Go test with and without concurrent cognitive task during the medication OFF period. The clock-turn group performed the Timed Up and Go test using the clock-turn strategy, whereas participants in the usual-turn group performed in their usual manner. Measurements were taken during the 180° turn of the Timed Up and Go test. The pattern of turning steps was evaluated by step time variability and step time asymmetry. Turning performance was evaluated by turning time and number of turning steps. The number and duration of freezing of gait were calculated by video review. The clock-turn group had lower step time variability and step time asymmetry than the usual-turn group. Furthermore, the clock-turn group turned faster with fewer freezing of gait episodes than the usual-turn group. Dual task increased the step time variability and step time asymmetry in both groups but did not affect turning performance and freezing severity. The clock-turn strategy reduces turning time and freezing of gait during turning, probably by lowering step time variability and asymmetry. Dual task compromises the effects of the clock-turn strategy, suggesting a competition for attentional resources.Video Abstract available for more insights from the authors (see Supplemental Digital Content 1, http://links.lww.com/JNPT/A141).

EXTRACTING TOPOLOGICAL RELATIONS BETWEEN INDOOR SPACES FROM POINT CLOUDS

Directory of Open Access Journals (Sweden)

H. Tran

2017-09-01

Full Text Available 3D models of indoor environments are essential for many application domains such as navigation guidance, emergency management and a range of indoor location-based services. The principal components defined in different BIM standards contain not only building elements, such as floors, walls and doors, but also navigable spaces and their topological relations, which are essential for path planning and navigation. We present an approach to automatically reconstruct topological relations between navigable spaces from point clouds. Three types of topological relations, namely containment, adjacency and connectivity of the spaces are modelled. The results of initial experiments demonstrate the potential of the method in supporting indoor navigation.

The Sun-Earth saddle point: characterization and opportunities to test general relativity

Science.gov (United States)

Topputo, Francesco; Dei Tos, Diogene A.; Rasotto, Mirco; Nakamiya, Masaki

2018-04-01

The saddle points are locations where the net gravitational accelerations balance. These regions are gathering more attention within the astrophysics community. Regions about the saddle points present clean, close-to-zero background acceleration environments where possible deviations from General Relativity can be tested and quantified. Their location suggests that flying through a saddle point can be accomplished by leveraging highly nonlinear orbits. In this paper, the geometrical and dynamical properties of the Sun-Earth saddle point are characterized. A systematic approach is devised to find ballistic orbits that experience one or multiple passages through this point. A parametric analysis is performed to consider spacecraft initially on L_{1,2} Lagrange point orbits. Sun-Earth saddle point ballistic fly-through trajectories are evaluated and classified for potential use. Results indicate an abundance of short-duration, regular solutions with a variety of characteristics.

Evaluation of cutting force uncertainty components in turning

DEFF Research Database (Denmark)

Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

2000-01-01

A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

Medium dependent dual turn on/turn off fluorescence sensing for Cu2 + ions using AMI/SDS assemblies

Science.gov (United States)

Gujar, Varsha B.; Ottoor, Divya

2017-02-01

Behavior of Amiloride (AMI) as a metal ion sensor in anionic surfactant assemblies of varying concentrations at different pH is depicted in this work. From a non-sensor fluorophore, AMI has been transformed in to a tunable fluorosensor for Cu2 + ions in various SDS concentrations. At premicellar concentration of SDS, ion-pair complex is expected to be formed between AMI and SDS due to electrostatic interactions between them. However at CMC concentrations of SDS, fluorescence intensity of AMI is greatly enhanced with red shift in emission, due to the incorporation of AMI molecule in the hydrophobic micellar interface. The behavior of metal sensing by AMI-SDS assemblies gives rise to several interesting observations. Micellation of SDS has been greatly enhanced by increasing copper ion concentrations, as these counter ions screens the charge on monomers of SDS which lead to the aggregation at premicellar concentrations only. Concentrations and pH dependent discrete trends of interactions between SDS-AMI and SDS-Cu2 + ions, have given tunable fluorescence responses (fluorescence turn on/turn off) of AMI for added Cu2 + ions. The electrostatic interaction between the metal cations and the anionic surfactants is the driving force for bringing the metal ions near to the vicinity of micelle where AMI resides. Thus, a comprehensive understanding of the mechanism related to the 'turn on-turn off' fluorescence response of AMI with respect to pH and SDS concentration for effective Cu2 + ion sensing is illustrated in this work.

Towards an Articulation of the Material and Visual Turn in Organization Studies

DEFF Research Database (Denmark)

Boxenbaum, Eva; Jones, Candace; Meyer, Renate

2018-01-01

Contemporary organizations increasingly rely on images, logos, videos, building materials, graphic and product design, and a range of other material and visual artifacts to compete, communicate, form identity and organize their activities. This Special Issue focuses on materiality and visuality...... on the articles in the special issue, we further explore the affordances and limits of the material and visual dimensions of organizing in relation to novelty. We conclude by pointing out theoretical avenues for advancing multimodal research, and discuss some of the ethical, pragmatic and identity...... in the course of objectifying and reacting to novel ideas, and, more broadly, contributes to organizational theory by articulating the emergent contours of a material and visual turn in the study of organizations. In this Introduction, we provide an overview of research on materiality and visuality. Drawing...

[Turning points in world history: urological comments on pathography of famous people: did Napoleon Bonaparte have a cystitis during the battle of Waterloo and was the battle lost because of that?].

Science.gov (United States)

Hatzinger, M; Stastny, M; Haferkamp, A

2011-03-01

Apparently unimportant diseases of some prominent figures can have a considerable effect on the course of time at turning points in world history. It is quite conceivable that the Battle of Waterloo on 18 June 1815 had been lost by France because Napoleon was not in full possession of his powers, because he was suffering from acute cystitis. Adverse weather conditions with continuous rain and coldness in advance of the battle, extremely primitive hygienic conditions and more than simple quarters for the night led to the development of cystitis. Based on the records of his biographers, his personal physician and the letters to his brother, we know that Napoleon was not able to give the command to attack in the early morning as intended, but in the early noon, only because of his bad general condition. This delay of several hours led, as we all know, to the intervention of Prussia and the devastating defeat of France. Thus it appears that a relatively unimportant urological disease influenced the course of world history crucially.

Method to Minimize the Low-Frequency Neutral-Point Voltage Oscillations With Time-Offset Injection for Neutral-Point-Clamped Inverters

DEFF Research Database (Denmark)

Choi, Ui-Min; Blaabjerg, Frede; Lee, Kyo-Beum

2015-01-01

time of small- and medium-voltage vectors. However, if the power factor is lower, there is a limitation to eliminate neutral-point oscillations. In this case, the proposed method can be improved by changing the switching sequence properly. Additionally, a method for neutral-point voltage balancing......This paper proposes a method to reduce the low-frequency neutral-point voltage oscillations. The neutral-point voltage oscillations are considerably reduced by adding a time offset to the three-phase turn-on times. The proper time offset is simply calculated considering the phase currents and dwell...

Computation of the Coupling Resonance Driving term f1001 and the coupling coefficient C from turn-by-turn single-BPM data.

CERN Document Server

Franchi, A; Vanbavinkhove, G; CERN. Geneva. BE Department

2010-01-01

In this note we show how to compute the Resonance Driving Term (RDT) f1001, the local resonance term chi 1010 and the coupling coefficient C from the spectrum of turn-by-turn single-BPM data. The harmonic analysis of real coordinate x(y) is model independent, conversely to the the analysis of the complex Courant-Snyder coordinate hx,- = x-ipx. From the computation of f1001 along the ring is closely related to the global coupling coefficient C, but it is affected by an intrinsic error, discussed in this note.

Measuring Operational Success: Establishing Criteria to Benchmark the Point of Culmination

National Research Council Canada - National Science Library

Caraccilo, Dominic

1997-01-01

... has for the establishment of criteria that measure operational success on the battlefield. This void, in-turn, impacts directly on the operational commander's capability to identify his point(s) of culmination...

Practical challenges related to point of care testing

Directory of Open Access Journals (Sweden)

Julie L.V. Shaw

2016-04-01

Full Text Available Point of care testing (POCT refers to laboratory testing that occurs near to the patient, often at the patient bedside. POCT can be advantageous in situations requiring rapid turnaround time of test results for clinical decision making. There are many challenges associated with POCT, mainly related to quality assurance. POCT is performed by clinical staff rather than laboratory trained individuals which can lead to errors resulting from a lack of understanding of the importance of quality control and quality assurance practices. POCT is usually more expensive than testing performed in the central laboratory and requires a significant amount of support from the laboratory to ensure the quality testing and meet accreditation requirements.Here, specific challenges related to POCT compliance with accreditation standards are discussed along with strategies that can be used to overcome these challenges. These areas include: documentation of POCT orders, charting of POCT results as well as training and certification of individuals performing POCT. Factors to consider when implementing connectivity between POCT instruments and the electronic medical record are also discussed in detail and include: uni-directional versus bidirectional communication, linking patient demographic information with POCT software, the importance of positive patient identification and considering where to chart POCT results in the electronic medical record. Keywords: Point of care Testing, Laboratory accreditation, Medical directive, Results documentation, Electronic Medical Record, Transcription error, Connectivity, Positive patient identification

Diamond turning on advanced machine tool prototypes

International Nuclear Information System (INIS)

Arnold, J.B.; Steger, P.J.

1975-01-01

Specular-quality metal mirrors are being machined for use in laser optical systems. The fabrication process incorporates special quality diamond tools and specially constructed turning machines. The machines are controlled by advanced control techniques and are housed in an environmentally controlled laboratory to insure ultimate machine stability and positional accuracy. The materials from which these mirrors are primarily produced are the softer face-center-cubic structure metals, such as gold, silver, copper, and aluminum. Mirror manufacturing by the single-point diamond machining process is in an early stage of development, but it is anticipated that this method will become the most economical way for producing high-quality metal mirrors. (U.S.)

ANALYSIS OF CHIP FORMATION DURING HARD TURNING THROUGH ACOUSTIC EMISSION

Directory of Open Access Journals (Sweden)

Miroslav Neslušan

2012-01-01

Full Text Available The paper deals with analysis of chip formation and related aspects of the chip formation during turning hardened steel 100Cr6. The paper draws a comparison of some aspects of the chip formation between turning annealed and hardened roll bearing steel. The results of the analysis show that there is the formation of a segmented chip in the case of hard turning. Frequency of segmentation is very high. A conventional piezoelectric dynamometer limits the frequency response to about 3.5 kHz. On the other hand, the frequency of process fluctuation may by obtained by using accelerometers or acoustic emission. This paper reports about the dynamic character of cutting process when hard turning and correlation among the calculated segmentation frequencies and the experimental analysis.

Recent progress in the relative equilibria of point vortices — In memoriam Hassan Aref

DEFF Research Database (Denmark)

Beelen, Peter; Brøns, Morten; Krishnamurthy, Vikas S.

2013-01-01

Hassan Aref, who sadly passed away in 2011, was one of the world's leading researchers in the dynamics and equilibria of point vortices. We review two problems on the subject of point vortex relative equilibria in which he was engaged at the time of his death: bilinear relative equilibria...

Turn-by-Turn and Bunch-by-Bunch Transverse Profiles of a Single Bunch in a Full Ring

International Nuclear Information System (INIS)

Kraus, R.; Fisher, A.S.

2005-01-01

The apparatus described in this paper can image the evolution of the transverse profile of a single bunch, isolated from a full PEP-II ring of 1500 bunches. Using this apparatus there are two methods of single bunch imaging; bunch-by-bunch beam profiling can image every bunch in the ring a single bunch at a time with the images of sequential bunches being in order, allowing one to see variations in beam size along a train. Turn-by-turn beam profiling images a single bunch on each successive turn it makes around the ring. This method will be useful in determining the effect that an injected bunch has on a stable bunch as the oscillations of the injected bunch damp out. Turn-by-turn imaging of the synchrotron light uses a system of lenses and mirrors to image many turns of both the major and minor axis of a single bunch across the photocathode of a gateable camera. The bunch-by-bunch method is simpler: because of a focusing mirror used in porting the light from the ring, the synchrotron light from the orbiting electrons becomes an image at a certain distance from the mirror; and since the camera does not use a lens, the photocathode is set exactly at this image distance. Bunch-by-bunch profiling has shown that in the Low Energy Ring (LER) horizontal bunch size decreases along a train. Turn-by-turn profiling has been able to image 100 turns of a single bunch on one exposure of the camera. The turn-by-turn setup has also been able to image 50 turns of the minor axis showing part of the damping process of an oscillating injected charge during a LER fill. The goal is to image the damping of oscillations of injected charge for 100 turns of both the major and minor axis throughout the damping process during trickle injection. With some changes to the apparatus this goal is within reach and will make turn-by-turn imaging a very useful tool in beam diagnostics

Design and fabrication of micro-nano enhanced surfaces for controlling Leidenfrost point

OpenAIRE

Grøstad, Eivind

2016-01-01

The technological revolution has driven the need for faster microprocessors. In order to fabricate faster microprocessors the trend has been to increase the amount of transistors and increase the clock speed. Microprocessor clock speed reached a point of saturation in 2006 because of the thermal challenges related to the transistors. As microprocessor power densities are increasing beyond air cooling limits, liquid cooling will become necessary. Spray cooling turn out to be the best candidate...

Three Studies Point to Same Risk Gene for Age-Related Macular Degeneration

Science.gov (United States)

... point to same risk gene for age-related macular degeneration NIH-funded research helps unravel the biology of ... rare, but powerful risk factor for age-related macular degeneration (AMD), a common cause of vision loss in ...

Beam Optics Measurements Through Turn by Turn Beam Position Data in the SLS

CERN Document Server

Zisopoulos, P; Streun, A; Ziemann, v

2013-01-01

Refined Fourier analysis of turn-by-turn (TBT) transverse position data measurements can be used for determining several beam properties of a ring, such as transverse tunes, optics functions, phases, chromatic properties and coupling. In particular, the Numerical Analysis of Fundamental Frequencies (NAFF) algorithm is used to analyse TBT data from the Swiss Light Source (SLS) storage ring in order to estimate on and off-momentum beam characteristics. Of particular interest is the potential of using the full position information within one turn in order to measure beam optics properties.

Realistic page-turning of electronic books

Science.gov (United States)

Fan, Chaoran; Li, Haisheng; Bai, Yannan

2014-01-01

The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

Aggression-related brain function assessed with the Point Subtraction Aggression Paradigm in fMRI

DEFF Research Database (Denmark)

Skibsted, Anine P; Cunha-Bang, Sofi da; Carré, Justin M

2017-01-01

The Point Subtraction Aggression Paradigm (PSAP) measures aggressive behavior in response to provocations. The aim of the study was to implement the PSAP in a functional neuroimaging environment (fMRI) and evaluate aggression-related brain reactivity including response to provocations and associa......The Point Subtraction Aggression Paradigm (PSAP) measures aggressive behavior in response to provocations. The aim of the study was to implement the PSAP in a functional neuroimaging environment (fMRI) and evaluate aggression-related brain reactivity including response to provocations...... and associations with aggression within the paradigm. Twenty healthy participants completed two 12-min PSAP sessions within the scanner. We evaluated brain responses to aggressive behavior (removing points from an opponent), provocations (point subtractions by the opponent), and winning points. Our results showed...... with the involvement of these brain regions in emotional and impulsive behavior. Striatal reactivity may suggest an involvement of reward during winning and stealing points....

Hummingbirds control turning velocity using body orientation and turning radius using asymmetrical wingbeat kinematics.

Science.gov (United States)

Read, Tyson J G; Segre, Paolo S; Middleton, Kevin M; Altshuler, Douglas L

2016-03-01

Turning in flight requires reorientation of force, which birds, bats and insects accomplish either by shifting body position and total force in concert or by using left-right asymmetries in wingbeat kinematics. Although both mechanisms have been observed in multiple species, it is currently unknown how each is used to control changes in trajectory. We addressed this problem by measuring body and wingbeat kinematics as hummingbirds tracked a revolving feeder, and estimating aerodynamic forces using a quasi-steady model. During arcing turns, hummingbirds symmetrically banked the stroke plane of both wings, and the body, into turns, supporting a body-dependent mechanism. However, several wingbeat asymmetries were present during turning, including a higher and flatter outer wingtip path and a lower more deviated inner wingtip path. A quasi-steady analysis of arcing turns performed with different trajectories revealed that changes in radius were associated with asymmetrical kinematics and forces, and changes in velocity were associated with symmetrical kinematics and forces. Collectively, our results indicate that both body-dependent and -independent force orientation mechanisms are available to hummingbirds, and that these kinematic strategies are used to meet the separate aerodynamic challenges posed by changes in velocity and turning radius. © 2016 The Author(s).

Leibniz, Lefebvre and the spatial turn in law

Directory of Open Access Journals (Sweden)

Isolde de Villiers

2016-11-01

Full Text Available This contribution takes as its point of departure the spatial turn in law and the notion of spatial justice. It traces the term ‘spatial justice’ as introduced through the Spatial Planning and Land Use Management Act and it looks at the underlying view of space that has influenced the spatial turn in law. It furthermore investigates the ways in which the spatial turn in law has been influenced by the thinking of Henri Lefebvre, who relies on a Leibnizian conception of space. Lastly the link between Leibniz and legal positivism is considered in order to reach the final conclusion in the form of a caution against merely adding the language of spatial justice to an approach to space that remains caught up in abstract space. This will only further entrench existing fault lines in society. For this conclusion the work of Roger Berkowitz is central. Berkowitz argues convincingly that the work of Leibniz was central in the development of legal positivism, despite Leibniz in general being considered as a natural law thinker. The same applies to spatial justice theory, where the work of Leibniz is central: it may present the possibilities of another law – the law as it ought to be. The law conceptualised as ‘ought’ instead of ‘is’ would promote reconciliation. Alternatively, spatial justice can simply present the law as it ‘is’ and reconfirm and deepen the chasms in our world.

The Storytelling Aspect of Interpersonal Relations: Understanding "Relating" from a Mentalization Point of View.

Science.gov (United States)

Thompson, J Mark; Tuch, Richard

Improving a patient's ability to form and maintain satisfactory interpersonal relations is an important goal in many therapies. A mentalization-based approach to treatment is ideally suited to achieve this end to the extent it's designed to help improve a patient's ability to form more nuanced guesses about why others act as they do, based on a more accurate "read" of that individual's beliefs and desires. Interpersonal difficulties often issue when patients remain insistent on their own interpretation of another's motives that fly in the face of that individual's understanding of what is "driving" them. Helping patients explore the basis upon which they'd formed their conclusions about others goes a ways toward opening their mind to the possibility that things are a bit more complicated than first imaged. This in turn leads to greater curiosity and willingness to explore their own narratives and perceptions.

3D characterisation of tool wear whilst diamond turning silicon

OpenAIRE

Durazo-Cardenas, Isidro Sergio; Shore, Paul; Luo, X.; Jacklin, T.; Impey, S. A.; Cox, A.

2006-01-01

Nanometrically smooth infrared silicon optics can be manufactured by the diamond turning process. Due to its relatively low density, silicon is an ideal optical material for weight sensitive infrared (IR) applications. However, rapid diamond tool edge degradation and the effect on the achieved surface have prevented significant exploitation. With the aim of developing a process model to optimise the diamond turning of silicon optics, a series of experimental trials were devi...

Special relativity from observer's mathematics point of view

Science.gov (United States)

Khots, Boris; Khots, Dmitriy

2015-09-01

When we create mathematical models for quantum theory of light we assume that the mathematical apparatus used in modeling, at least the simplest mathematical apparatus, is infallible. In particular, this relates to the use of "infinitely small" and "infinitely large" quantities in arithmetic and the use of Newton - Cauchy definitions of a limit and derivative in analysis. We believe that is where the main problem lies in contemporary study of nature. We have introduced a new concept of Observer's Mathematics (see www.mathrelativity.com). Observer's Mathematics creates new arithmetic, algebra, geometry, topology, analysis and logic which do not contain the concept of continuum, but locally coincide with the standard fields. We use Einstein special relativity principles and get the analogue of classical Lorentz transformation. This work considers this transformation from Observer's Mathematics point of view.

1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

Is This The Turning Point?

African Journals Online (AJOL)

denise

social sciences and, equally important, the seemingly ever-changing methodological scenarios ... qualitative research approaches per se in ... The latest book on qualitative research methods ... Qualitative and Quantitative Paradigms Shape.

Searching for Criteria in Evaluating the Monofin Swimming Turn from the Perspective of Coaching and Improving Technique

Science.gov (United States)

Rejman, Marek; Borowska, Grażyna

2008-01-01

and glide time. Key pointsShort time and large surface of the monofin additionally hinders complexity of the turn performance by disturbance in sensing and controlling body in water. Availability of no objective data on monofin swimming turns resulted in research in the field connected with specifying parameters needed for the technique evaluation.Correct turn technique may help to improve swimming race results.The diagram constructed on the basis of the interdependency of the total turn time and the remaining recorded kinematic parameters should establish the areas of searching for mechanism of effective and efficient monofin swimming turn.The most crucial, from the coaching and improving point of view, seem to be activities which take place from the moment of feet wall contact till the first propulsive movements. Therefore, the high quality of the monofin swimming turn technique is not just a simple consequence of the fastest performance of all its component parts.The most important criteria of the quality in the monofin swimming turn technique are: striving for extending in the optimum scope of wall contact time, the time of the push-off phase and the glide time. PMID:24150136

On the Relation Between Facular Bright Points and the Magnetic Field

Science.gov (United States)

Berger, Thomas; Shine, Richard; Tarbell, Theodore; Title, Alan; Scharmer, Goran

1994-12-01

Multi-spectral images of magnetic structures in the solar photosphere are presented. The images were obtained in the summers of 1993 and 1994 at the Swedish Solar Telescope on La Palma using the tunable birefringent Solar Optical Universal Polarimeter (SOUP filter), a 10 Angstroms wide interference filter tuned to 4304 Angstroms in the band head of the CH radical (the Fraunhofer G-band), and a 3 Angstroms wide interference filter centered on the Ca II--K absorption line. Three large format CCD cameras with shuttered exposures on the order of 10 msec and frame rates of up to 7 frames per second were used to create time series of both quiet and active region evolution. The full field--of--view is 60times 80 arcseconds (44times 58 Mm). With the best seeing, structures as small as 0.22 arcseconds (160 km) in diameter are clearly resolved. Post--processing of the images results in rigid coalignment of the image sets to an accuracy comparable to the spatial resolution. Facular bright points with mean diameters of 0.35 arcseconds (250 km) and elongated filaments with lengths on the order of arcseconds (10(3) km) are imaged with contrast values of up to 60 % by the G--band filter. Overlay of these images on contemporal Fe I 6302 Angstroms magnetograms and Ca II K images reveals that the bright points occur, without exception, on sites of magnetic flux through the photosphere. However, instances of concentrated and diffuse magnetic flux and Ca II K emission without associated bright points are common, leading to the conclusion that the presence of magnetic flux is a necessary but not sufficient condition for the occurence of resolvable facular bright points. Comparison of the G--band and continuum images shows a complex relation between structures in the two bandwidths: bright points exceeding 350 km in extent correspond to distinct bright structures in the continuum; smaller bright points show no clear relation to continuum structures. Size and contrast statistical cross

CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

CERN Document Server

Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

2013-01-01

The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

Sandstone Turning by Abrasive Waterjet

Czech Academy of Sciences Publication Activity Database

Hlaváček, Petr; Cárach, J.; Hloch, Sergej; Vasilko, K.; Klichová, Dagmar; Klich, Jiří; Lehocká, D.

2015-01-01

Roč. 48, č. 6 (2015), s. 2489-2493 ISSN 0723-2632 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet Subject RIV: JQ - Machines ; Tools Impact factor: 2.386, year: 2015 http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

NetTurnP--neural network prediction of beta-turns by use of evolutionary information and predicted protein sequence features.

Directory of Open Access Journals (Sweden)

Bent Petersen

Full Text Available UNLABELLED: β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC=0.50, Qtotal=82.1%, sensitivity=75.6%, PPV=68.8% and AUC=0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17-0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. CONCLUSION: The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences.

NetTurnP--neural network prediction of beta-turns by use of evolutionary information and predicted protein sequence features.

Science.gov (United States)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-11-30

β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC=0.50, Qtotal=82.1%, sensitivity=75.6%, PPV=68.8% and AUC=0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17-0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences.

Turning a Poor Ion Channel into a Good Pump

Science.gov (United States)

Astumian, Dean

2003-05-01

We consider a membrane protein that can exist in two configurations, either one of which acts as a poor ion channel, allowing ions to slowly leak across the membrane from high to low elctrochemical potential. We show that random external fluctuations can provide the energy to turn this poor channel into a good pump that drives ion transport from low to high electrochemical potential. We discuss this result in terms of a gambling analogy, and point to possible implications for fields as far ranging as population biology, economics, and actuarial science.

Improvement of lithium chloride dew-point hygrometer for direct reading and controlling of relative humidity

Energy Technology Data Exchange (ETDEWEB)

Zhang, X.Z.; Chu, Y.

1986-01-01

The lithium chloride dew-point hygrometer has many advantages over other types of hygrometers. However, it only reads and controls the dew-point temperature of air instead of the relative humidity, which is more important in industry, agriculture, food storage, and hygiene. This paper describes a new hygrometer which is based on the same principle as the lithium chloride dew-point hygrometer, but it can read and control the relative humidity directly. The instrument is quick in response and the ranges of temperature and relative humidity are quite large. Its accuracy is normally within 3% RH and its precision is within 2% RH.

and γγ-turns in proteins revisited: A new set of amino acid turn-type de

Indian Academy of Sciences (India)

mine, valine, glutamic acid and alanine has decreased for β-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other.

Statistical imitation system using relational interest points and Gaussian mixture models

CSIR Research Space (South Africa)

Claassens, J

2009-11-01

Full Text Available The author proposes an imitation system that uses relational interest points (RIPs) and Gaussian mixture models (GMMs) to characterize a behaviour. The system's structure is inspired by the Robot Programming by Demonstration (RDP) paradigm...

Beta-and gamma-turns in proteins revisited: a new set of amino acid turn-type dependent positional preferences and potentials.

Science.gov (United States)

Guruprasad, K; Rajkumar, S

2000-06-01

The number of beta-turns in a representative set of 426 protein three-dimensional crystal structures selected from the recent Protein Data Bank has nearly doubled and the number of gamma-turns in a representative set of 320 proteins has increased over seven times since the previous analysis. Beta-turns (7153) and gamma-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and potentials. Compared with previous results, the preference for proline, methionine and tryptophan has increased and the preference for glutamine, valine, glutamic acid and alanine has decreased for beta-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other interactions involving the turns. Where main-chain hydrogen bonds of the type NH(i + 3) --> CO(i) were not observed for some beta-turns, other main-chain hydrogen bonds or solvent interactions were observed that possibly stabilize such beta-turns. A number of unexpected isolated beta-turns with proline at i + 2 position were also observed. The NH(i + 2) --> CO(i) hydrogen bond was observed for almost all gamma-turns. Nearly 20% classic gamma-turns and 43% inverse gamma-turns are isolated turns.

Turn-by-Turn Imaging of the Transverse Beam Profile in PEP-II

Energy Technology Data Exchange (ETDEWEB)

Fisher, Alan A.; Petree, Mark; /SLAC

2006-12-18

During injection or instability, the transverse profile of an individual bunch in a storage ring can change significantly in a few turns. However, most synchrotron-light imaging techniques are not designed for this time scale. We have developed a novel diagnostic that enhances the utility of a fast gated camera by adding, inexpensively, some features of a dual-axis streak camera, in order to watch the turn-by-turn evolution of the transverse profile, in both x and y. The beam's elliptical profile is reshaped using cylindrical lenses to form a tall and narrow ellipse--essentially the projection of the full ellipse onto one transverse axis. We do this projection twice, by splitting the beam into two paths at different heights, and rotating the ellipse by 90{sup o} on one path. A rapidly rotating mirror scans these vertical ''pencils'' of light horizontally across the photocathode of the camera, which is gated for 3 ns on every Nth ring turn. A single readout of the camera captures 100 images, looking like a stroboscopic photograph of a moving object. We have observed the capture of injected charge into a bunch and the rapid change of beam size at the onset of a fast instability.

Diamond Turning Of Infra-Red Components

Science.gov (United States)

Hodgson, B.; Lettington, A. H.; Stillwell, P. F. T. C.

1986-05-01

Single point diamond machining of infra-red optical components such as aluminium mirrors, germanium lenses and zinc sulphide domes is potentially the most cost effective method for their manufacture since components may be machined from the blanks to a high surface finish, requiring no subsequent polishing, in a few minutes. Machines for the production of flat surfaces are well established. Diamond turning lathes for curved surfaces however require a high capital investment which can be justified only for research purposes or high volume production. The present paper describes the development of a low cost production machine based on a Bryant Symons diamond turning lathe which is able to machine spherical components to the required form and finish. It employs two horizontal spindles one for the workpiece the other for the tool. The machined radius of curvature is set by the alignment of the axes and the radius of the tool motion, as in conventional generation. The diamond tool is always normal to the workpiece and does not need to be accurately profiled. There are two variants of this basic machine. For machining hemispherical domes the axes are at right angles while for lenses with positive or negative curvature these axes are adjustable. An aspherical machine is under development, based on the all mechanical spherical machine, but in which a ± 2 mm aspherecity may be imposed on the best fit sphere by moving the work spindle under numerical control.

Clinical evaluation of an automated turning bed.

Science.gov (United States)

Melland, H I; Langemo, D; Hanson, D; Olson, B; Hunter, S

1999-01-01

The purposes of this study were to assess client comfort and sleep quality, client physiologic response (skin and respiratory status), the effect on the need for caregiver assistance, and cost when using an automated turning bed. Nonexperimental, evaluative study. Twenty-four adult home or long-term care resident subjects who had a degenerative disease, spinal cord injury, stroke, cerebral palsy, or back surgery. Each subject agreed to use the automated turning bed for four weeks. Researchers completed a demographic survey and skin assessment, and assessed each subject for pressure ulcer risk and for the need of assistance of a care giver for turning before and after the four weeks of using the turning bed. Subjects rated the turning bed in terms of comfort and sleep quality. Subjects rated the turning bed as more comfortable than their own bed and expressed satisfaction at the pain relief attained when on the turning bed. While using the turning bed, there was a significant improvement in sleep quality. No skin breakdown or deterioration in respiratory status occurred. Fewer subjects required the assistance of a caregiver for turning when on the turning bed. This automated turning bed shows great promise in meeting a need for patients with limited mobility whether they are homebound or in a residential community. Future studies that further investigate use of the turning bed for postoperative back patients while still in the acute care setting are indicated. Replicative studies with a larger sample size are also indicated.

and γγ-turns in proteins revisited: A new set of amino acid turn-type de

Indian Academy of Sciences (India)

cent Protein Data Bank has nearly doubled and the number of γ-turns in a representative set of 320 proteins has in- creased over seven times since the previous analysis. β-turns (7153) and γ-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and ...

NetTurnP – Neural Network Prediction of Beta-turns by Use of Evolutionary Information and Predicted Protein Sequence Features

DEFF Research Database (Denmark)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-01-01

is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino......β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method...... NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which...

Electrical Machines: Turn-to-Turn Capacitance in Formed Windings with Rectangular Cross-Section Wire

NARCIS (Netherlands)

Djukic, Nenad; Encica, L.; Paulides, Johan

2015-01-01

Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors – finite element (FE) method and two previously published

32 CFR 636.23 - Turning movements.

Science.gov (United States)

2010-07-01

... Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... movements. (a) U-turns are prohibited on all streets in the cantonment area. (b) Right-turns will be made from a position as close to the right edge or right curb of the roadway as possible. (c) Left-turns...

Turning collectors for solar radiation

Science.gov (United States)

Barak, Amitzur Z.

1976-01-01

A device is provided for turning a solar collector about the polar axis so that the collector is directed toward the sun as the sun tracks the sky each day. It includes two heat-expansive elements and a shadow plate. In the morning a first expansive element is heated, expands to turn the collector to face the sun, while the second expansive element is shaded by the plate. In the afternoon the second element is heated, expands to turn the collector to face the sun, while the first is shaded by the plate.

Universal compact lower limb turning module intended for use in orthotic robots

Directory of Open Access Journals (Sweden)

Janowski Mateusz

2018-01-01

Full Text Available In this paper, a model of an orthotic robot’s lower limb rotation system is presented. The system is intended for use in typical contemporary orthotic robots such as the ‘Veni-Prometheus’ System for Verticalization and Aiding Motion designed at the Faculty of Mechatronics, Warsaw University of Technology. In the paper, the state of the art is briefly stated, with the relatively low number of orthotic robots allowing realization of pivoting turns highlighted. The intended two-stage pivoting turning movement is analyzed in detail and the operating conditions as well as limitations of the turning module are indicated. The conception of a turning module introduces additional degree of freedom to the existing orthotic robot designs by realizing the rotation about the lengthwise axis in the thigh link. A three-dimensional model and its analysis are shown. The proposed design ensures the necessary movement of the lower limb and the torso of an impaired person during the execution of pivoting turn while remaining compact in order to ease the introduction of the turning system to different orthotic robot designs.

NetTurnP – Neural Network Prediction of Beta-turns by Use of Evolutionary Information and Predicted Protein Sequence Features

Science.gov (United States)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-01-01

β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC  = 0.50, Qtotal = 82.1%, sensitivity  = 75.6%, PPV  = 68.8% and AUC  = 0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17 – 0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. Conclusion The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences. PMID:21152409

Document turn-over analysis to determine need of NPP construction in build-up structures of reinforced concrete

International Nuclear Information System (INIS)

Vojpe, D.K.; Lyubavin, V.K.

1986-01-01

Document turn-over to determine used of NPP construction in build-up structures of reinforced concrete is carried out. Ways of improving determination of needs of NPP construction board in the mentioned structures are pointed out

A note on the energy of relative equilibria of point vortices

DEFF Research Database (Denmark)

Aref, Hassan

2007-01-01

Analytical formulas are derived for the energy of simple relative equilibria of identical point vortices such as the regular polygons, both open and centered, and the various known configurations consisting of nested regular polygons with or without a vortex at the center. ©2007 American Institute...

Predicting turns in proteins with a unified model.

Directory of Open Access Journals (Sweden)

Qi Song

Full Text Available MOTIVATION: Turns are a critical element of the structure of a protein; turns play a crucial role in loops, folds, and interactions. Current prediction methods are well developed for the prediction of individual turn types, including α-turn, β-turn, and γ-turn, etc. However, for further protein structure and function prediction it is necessary to develop a uniform model that can accurately predict all types of turns simultaneously. RESULTS: In this study, we present a novel approach, TurnP, which offers the ability to investigate all the turns in a protein based on a unified model. The main characteristics of TurnP are: (i using newly exploited features of structural evolution information (secondary structure and shape string of protein based on structure homologies, (ii considering all types of turns in a unified model, and (iii practical capability of accurate prediction of all turns simultaneously for a query. TurnP utilizes predicted secondary structures and predicted shape strings, both of which have greater accuracy, based on innovative technologies which were both developed by our group. Then, sequence and structural evolution features, which are profile of sequence, profile of secondary structures and profile of shape strings are generated by sequence and structure alignment. When TurnP was validated on a non-redundant dataset (4,107 entries by five-fold cross-validation, we achieved an accuracy of 88.8% and a sensitivity of 71.8%, which exceeded the most state-of-the-art predictors of certain type of turn. Newly determined sequences, the EVA and CASP9 datasets were used as independent tests and the results we achieved were outstanding for turn predictions and confirmed the good performance of TurnP for practical applications.

What 'empirical turn in bioethics'?

Science.gov (United States)

Hurst, Samia

2010-10-01

Uncertainty as to how we should articulate empirical data and normative reasoning seems to underlie most difficulties regarding the 'empirical turn' in bioethics. This article examines three different ways in which we could understand 'empirical turn'. Using real facts in normative reasoning is trivial and would not represent a 'turn'. Becoming an empirical discipline through a shift to the social and neurosciences would be a turn away from normative thinking, which we should not take. Conducting empirical research to inform normative reasoning is the usual meaning given to the term 'empirical turn'. In this sense, however, the turn is incomplete. Bioethics has imported methodological tools from empirical disciplines, but too often it has not imported the standards to which researchers in these disciplines are held. Integrating empirical and normative approaches also represents true added difficulties. Addressing these issues from the standpoint of debates on the fact-value distinction can cloud very real methodological concerns by displacing the debate to a level of abstraction where they need not be apparent. Ideally, empirical research in bioethics should meet standards for empirical and normative validity similar to those used in the source disciplines for these methods, and articulate these aspects clearly and appropriately. More modestly, criteria to ensure that none of these standards are completely left aside would improve the quality of empirical bioethics research and partly clear the air of critiques addressing its theoretical justification, when its rigour in the particularly difficult context of interdisciplinarity is what should be at stake.

The embodied turn in research on language and social interaction

DEFF Research Database (Denmark)

Nevile, Maurice

2015-01-01

I use the term the embodied turn to mean the point when interest in the body became established among researchers on language and social interaction, exploiting the greater ease of video-recording. This review paper tracks the growth of "embodiment" in over 400 papers published in Research...... on Language and Social Interaction from 1987-2013. I consider closely two areas where analysts have confronted challenges, and how they have responded: settling on precise and analytically helpful terminology for the body; and transcribing and representing the body, particularly its temporality and manner....

Spatial turn and animation practices inspired by cultural anthropology

Directory of Open Access Journals (Sweden)

Agnieszka Wieszaczewska

2016-09-01

Full Text Available Spatial turn is one of the cultural turns, which have recently occurred in the humanities. It stresses the importance of issues such as space and place and can be successfully used as a theoretical perspective gaining use in thought over issues such as globalisation, transnationality, mapping but also education. In the discourses of pedagogical science space and place are considered through their multidimensional impact on education and learning. As significant concepts rooting pedagogy or pedagogy of borderland. The pedagogical reflection on space could be also used in the field of animation practices, especially in activities, which are related to place somehow colonised.

Toward an integrated ice core chronology using relative and orbital tie-points

Science.gov (United States)

Bazin, L.; Landais, A.; Lemieux-Dudon, B.; Toyé Mahamadou Kele, H.; Blunier, T.; Capron, E.; Chappellaz, J.; Fischer, H.; Leuenberger, M.; Lipenkov, V.; Loutre, M.-F.; Martinerie, P.; Parrenin, F.; Prié, F.; Raynaud, D.; Veres, D.; Wolff, E.

2012-04-01

Precise ice cores chronologies are essential to better understand the mechanisms linking climate change to orbital and greenhouse gases concentration forcing. A tool for ice core dating (DATICE [developed by Lemieux-Dudon et al., 2010] permits to generate a common time-scale integrating relative and absolute dating constraints on different ice cores, using an inverse method. Nevertheless, this method has only been applied for a 4-ice cores scenario and for the 0-50 kyr time period. Here, we present the bases for an extension of this work back to 800 ka using (1) a compilation of published and new relative and orbital tie-points obtained from measurements of air trapped in ice cores and (2) an adaptation of the DATICE inputs to 5 ice cores for the last 800 ka. We first present new measurements of δ18Oatm and δO2/N2 on the Talos Dome and EPICA Dome C (EDC) ice cores with a particular focus on Marine Isotopic Stages (MIS) 5, and 11. Then, we show two tie-points compilations. The first one is based on new and published CH4 and δ18Oatm measurements on 5 ice cores (NorthGRIP, EPICA Dronning Maud Land, EDC, Talos Dome and Vostok) in order to produce a table of relative gas tie-points over the last 400 ka. The second one is based on new and published records of δO2/N2, δ18Oatm and air content to provide a table of orbital tie-points over the last 800 ka. Finally, we integrate the different dating constraints presented above in the DATICE tool adapted to 5 ice cores to cover the last 800 ka and show how these constraints compare with the established gas chronologies of each ice core.

Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

Science.gov (United States)

Ekberg, Katie; Lecouteur, Amanda

2012-01-01

Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

Roles of beta-turns in protein folding: from peptide models to protein engineering.

Science.gov (United States)

Marcelino, Anna Marie C; Gierasch, Lila M

2008-05-01

Reverse turns are a major class of protein secondary structure; they represent sites of chain reversal and thus sites where the globular character of a protein is created. It has been speculated for many years that turns may nucleate the formation of structure in protein folding, as their propensity to occur will favor the approximation of their flanking regions and their general tendency to be hydrophilic will favor their disposition at the solvent-accessible surface. Reverse turns are local features, and it is therefore not surprising that their structural properties have been extensively studied using peptide models. In this article, we review research on peptide models of turns to test the hypothesis that the propensities of turns to form in short peptides will relate to the roles of corresponding sequences in protein folding. Turns with significant stability as isolated entities should actively promote the folding of a protein, and by contrast, turn sequences that merely allow the chain to adopt conformations required for chain reversal are predicted to be passive in the folding mechanism. We discuss results of protein engineering studies of the roles of turn residues in folding mechanisms. Factors that correlate with the importance of turns in folding indeed include their intrinsic stability, as well as their topological context and their participation in hydrophobic networks within the protein's structure.

An application of Darbo\\'s fixed point theorem in the relative ...

African Journals Online (AJOL)

Sufficient conditions for the relative controllability of a class of nonlinear systems with distributed delays in the control are established. Our results are based on the measure of non-compactness of a set and the Darbo's fixed point theorem. Global Jouranl of Mathematical Sciences Vol. 6 (1) 2007: pp. 21-26 ...

Human Prolactin Point Mutations and Their Projected Effect on Vasoinhibin Generation and Vasoinhibin-Related Diseases

Directory of Open Access Journals (Sweden)

Jakob Triebel

2017-11-01

Full Text Available BackgroundA dysregulation of the generation of vasoinhibin hormones by proteolytic cleavage of prolactin (PRL has been brought into context with diabetic retinopathy, retinopathy of prematurity, preeclampsia, pregnancy-induced hypertension, and peripartum cardiomyopathy. Factors governing vasoinhibin generation are incompletely characterized, and the composition of vasoinhibin isoforms in human tissues or compartments, such as the circulation, is unknown. The aim of this study was to determine the possible contribution of PRL point mutations to the generation of vasoinhibins as well as to project their role in vasoinhibin-related diseases.MethodsProlactin sequences, point mutations, and substrate specificity information about the PRL cleaving enzymes cathepsin D, matrix metalloproteinases 8 and 13, and bone-morphogenetic protein 1 were retrieved from public databases. The consequences of point mutations in regard to their possible effect on vasoinhibin levels were projected on the basis of a score indicating the suitability of a particular sequence for enzymatic cleavage that result in vasoinhibin generation. The relative abundance and type of vasoinhibin isoforms were estimated by comparing the relative cleavage efficiency of vasoinhibin-generating enzymes.ResultsSix point mutations leading to amino acid substitutions in vasoinhibin-generating cleavage sites were found and projected to either facilitate or inhibit vasoinhibin generation. Four mutations affecting vasoinhibin generation in cancer tissues were found. The most likely composition of the relative abundance of vasoinhibin isoforms is projected to be 15 > 17.2 > 16.8 > 17.7 > 18 kDa vasoinhibin.ConclusionProlactin point mutations are likely to influence vasoinhibin levels by affecting the proteolysis efficiency of vasoinhibin-generating enzymes and should be monitored in patients with vasoinhibin-related diseases. Attempts to characterize vasoinhibin-related diseases

Prediction of beta-turns with learning machines.

Science.gov (United States)

Cai, Yu-Dong; Liu, Xiao-Jun; Li, Yi-Xue; Xu, Xue-biao; Chou, Kuo-Chen

2003-05-01

The support vector machine approach was introduced to predict the beta-turns in proteins. The overall self-consistency rate by the re-substitution test for the training or learning dataset reached 100%. Both the training dataset and independent testing dataset were taken from Chou [J. Pept. Res. 49 (1997) 120]. The success prediction rates by the jackknife test for the beta-turn subset of 455 tetrapeptides and non-beta-turn subset of 3807 tetrapeptides in the training dataset were 58.1 and 98.4%, respectively. The success rates with the independent dataset test for the beta-turn subset of 110 tetrapeptides and non-beta-turn subset of 30,231 tetrapeptides were 69.1 and 97.3%, respectively. The results obtained from this study support the conclusion that the residue-coupled effect along a tetrapeptide is important for the formation of a beta-turn.

Turn-Based War Chess Model and Its Search Algorithm per Turn

Directory of Open Access Journals (Sweden)

Hai Nan

2016-01-01

Full Text Available War chess gaming has so far received insufficient attention but is a significant component of turn-based strategy games (TBS and is studied in this paper. First, a common game model is proposed through various existing war chess types. Based on the model, we propose a theory frame involving combinational optimization on the one hand and game tree search on the other hand. We also discuss a key problem, namely, that the number of the branching factors of each turn in the game tree is huge. Then, we propose two algorithms for searching in one turn to solve the problem: (1 enumeration by order; (2 enumeration by recursion. The main difference between these two is the permutation method used: the former uses the dictionary sequence method, while the latter uses the recursive permutation method. Finally, we prove that both of these algorithms are optimal, and we analyze the difference between their efficiencies. An important factor is the total time taken for the unit to expand until it achieves its reachable position. The factor, which is the total number of expansions that each unit makes in its reachable position, is set. The conclusion proposed is in terms of this factor: Enumeration by recursion is better than enumeration by order in all situations.

Study on Turn-to-turn Short Circuit On一line Monitoring System for Dry一type Ai r一core Reactor

Directory of Open Access Journals (Sweden)

GAO Zi-wei

2017-04-01

Full Text Available The change of current value caused by turn-to-turn short circuit of dry-type air-core reactor is so little that failure detection is difficult to be carried out. In order to solve this problem，a new on-line monitoring system based on impedance variation of turn-to-turn short circuit is proposed. The numerical method is applied to analyze the variation of equivalent resistance and equivalent reactance when dry-type air-core reactor winding short circuit happens in different places，and the monitoring method based on harmonic analysis method and quasi- synchronization sampling method is analyzed by theory. The hardware system，which takes single-chip microcomputer as the core of data processing and logic control，completes data acquisition of voltage signal and current signal of the reactor. In the respect of software design，the impedance variation will be uploaded to the PC after it has been calculated by using the above monitoring method，and then monitoring of turn-to-turn short circuit fault will be realized. Finally，the design of on-line monitoring system is studied by testing. The research result shows that，the equivalent resistance increases and the equivalent reactance decreases when turn-to-turn short circuit occurs，and the variation of equivalent resistance is more obvious than equivalent reactance. The experiment results prove that this monitoring method is true and the on-line monitoring system is feasible.

Alchemical inflation: inflaton turns into Higgs

Science.gov (United States)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-11-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field.

Alchemical inflation: inflaton turns into Higgs

International Nuclear Information System (INIS)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-01-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field

Development process and data management of TurnSTEP, a STEP-compliant CNC system for turning

NARCIS (Netherlands)

Choi, I.; Suh, S.-H; Kim, K.; Song, M.S.; Jang, M.; Lee, B.-E.

2006-01-01

TurnSTEP is one of the earliest STEP-compliant CNC systems for turning. Based on the STEP-NC data model formalized as ISO 14649-12 and 121, it is designed to support intelligent and autonomous control of NC machines for e-manufacturing. The present paper introduces the development process and data

Change of elastic constants induced by point defects in hop crystals

International Nuclear Information System (INIS)

Tome, C.

1979-10-01

An approximate model is developed to calculate the change of elastic constants induced by point defects in hcp metals, supposed the defect configuration is known. General expressions relating the change of elastic moduli to the final atomic coordinates and to the defect force field are derived using the specific symmetry of the defect. Explicit calculations are done for Mg. The predicted change of elastic moduli turns out to be negative for vacancies and trigonal interstitials while for hexagonal interstitials a positive change is predicted. Compatibility with experimental data would suggest that the trigonal configuration is the stable one. (author)

Constraining eye movement in individuals with Parkinson's disease during walking turns.

Science.gov (United States)

Ambati, V N Pradeep; Saucedo, Fabricio; Murray, Nicholas G; Powell, Douglas W; Reed-Jones, Rebecca J

2016-10-01

Walking and turning is a movement that places individuals with Parkinson's disease (PD) at increased risk for fall-related injury. However, turning is an essential movement in activities of daily living, making up to 45 % of the total steps taken in a given day. Hypotheses regarding how turning is controlled suggest an essential role of anticipatory eye movements to provide feedforward information for body coordination. However, little research has investigated control of turning in individuals with PD with specific consideration for eye movements. The purpose of this study was to examine eye movement behavior and body segment coordination in individuals with PD during walking turns. Three experimental groups, a group of individuals with PD, a group of healthy young adults (YAC), and a group of healthy older adults (OAC), performed walking and turning tasks under two visual conditions: free gaze and fixed gaze. Whole-body motion capture and eye tracking characterized body segment coordination and eye movement behavior during walking trials. Statistical analysis revealed significant main effects of group (PD, YAC, and OAC) and visual condition (free and fixed gaze) on timing of segment rotation and horizontal eye movement. Within group comparisons, revealed timing of eye and head movement was significantly different between the free and fixed gaze conditions for YAC (p  0.05). In addition, while intersegment timings (reflecting segment coordination) were significantly different for YAC and OAC during free gaze (p training programs for those with PD, possibly promoting better coordination during turning and potentially reducing the risk of falls.

Some genus 3 curves with many points

NARCIS (Netherlands)

Auer, R; Top, J; Fieker, C; Kohel, DR

2002-01-01

We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.

Factors influencing turning and its relationship with falls in individuals with Parkinson's disease.

Directory of Open Access Journals (Sweden)

Fang-Yu Cheng

Full Text Available BACKGROUND: Falls are a major problem for people with Parkinson's disease (PD. Many studies indicate that more than 50% of people with PD have difficulty in turning that may lead to falls during daily activities. The aims of this study were to identify the relationship between turning performance and falls, and to determine the factors that influence turning performance. METHODS: This study examined 45 patients with idiopathic PD (Hoehn and Yahr stage 1-3 using a battery of tests, including 180° turn time, balance, and muscle strength. The levels of disease severity and freezing of gait were also measured. The number of falls in the past 6 months was recorded. RESULTS: Sixteen out of forty-five participants experienced falls in the past 6 months. A receiver operating characteristic curve showed that turn time was highly related to falls [more affected side: sensitivity = 0.81, specificity = 0.79, area under the curve (AUC = 0.83; less affected side: sensitivity = 0.88, specificity = 0.76, AUC = 0.83]. The most important factor influencing turn time was balance ability (both sides: p = 0.000 according to the regression model. Correlations between turn time and dynamic balance were further established with reaction time, movement velocity, endpoint excursion, and maximal excursion of the LOS (limits of stability test. CONCLUSION: The time needed to complete a 180° turn during the SQT (step/quick turn test is a good index to differentiate fallers from non-fallers in persons with PD. Turn time is most influenced by balance. Furthermore, balance control, especially in an anterior or sideways direction, is important for turning performance.

Safety effectiveness of pavement design treatment at intersections: Left turning vehicles and pedestrians on crosswalks

Directory of Open Access Journals (Sweden)

Hasina Iasmin

2016-07-01

Full Text Available Pedestrians are the most vulnerable road users as they are more exposed than other road users. Pedestrian safety at road intersections still remains the most vital and yet unsolved issue. One of the critical points in pedestrian safety is the occurrence of accidents between left-turning vehicle and pedestrians on crosswalks at signalized intersections. A crosswalk is a place designated for pedestrians and cyclists to cross vehicular roads safely. Drivers are expected to give priority to pedestrians or cyclists during interactions between them on the crosswalk. If a driver exhibits non-yielding behavior, the interaction will turn into a collision. This study examined the safety effect of three crosswalks designed with different materials such as red-colored material or brick pavement based on a safety performance study. The safety performance study considered left-turning driver's gap acceptance behavior and the severity of traffic conflict events between left-turning vehicles and pedestrians. The results of the study indicates that using brick pavement on a crosswalk increases the safety level of the crosswalk. Drivers at such crosswalks are more acquiescent to the priority rule.

Effects of rearranged vision on event-related lateralizations of the EEG during pointing.

Science.gov (United States)

Berndt, Isabelle; Franz, Volker H; Bülthoff, Heinrich H; Gotz, Karl G; Wascher, Edmund

2005-01-01

We used event-related lateralizations of the EEG (ERLs) and reversed vision to study visuomotor processing with conflicting proprioceptive and visual information during pointing. Reversed vision decreased arm-related lateralization, probably reflecting the simultaneous activity of left and right arm specific neurons: neurons in the hemisphere contralateral to the observed action were probably activated by visual feedback, neurons in the hemisphere contralateral to the response side by the somatomotor feedback. Lateralization related to the target in parietal cortex increased, indicating that visual to motor transformation in parietal cortex required additional time and resources with reversed vision. A short period of adaptation to an additional lateral displacement of the visual field increased arm-contralateral activity in parietal cortex during the movement. This is in agreement with the, which showed that adaptation to a lateral displacement of the visual field is reflected in increased parietal involvement during pointing.

Universals and cultural variation in turn-taking in conversation

NARCIS (Netherlands)

Stivers, Tanya; Enfield, N. J.; Brown, Penelope; Englert, Christina; Hayashi, Makoto; Heinemann, Trine; Hoymann, Gertie; Rossano, Federico; de Ruiter, Jan Peter; Yoon, Kyung-Eun; Levinson, Stephen C.

2009-01-01

Informal verbal interaction is the core matrix for human social life. A mechanism for coordinating this basic mode of interaction is a system of turn-taking that regulates who is to speak and when. Yet relatively little is known about how this system varies across cultures. The anthropological

Fast Turn-off Mine Transient Electromagnetic Transmitter System

Directory of Open Access Journals (Sweden)

ZHENG Xiao-Liang

2014-05-01

Full Text Available For solving problems such as short turn-off time, high linear degree of falling edge, measurement of turn-off time and influence of primary signals for transient electromagnetic transmitter, and restrictions because of the environmental conditions of underground coal mine, this thesis aims at designing a new transient electromagnetic transmitter system suitable for coal mine. Supported by damping absorption circuit, such system applies small volume, sectional transmitting coil, with features of short turn-off time, high linear degree of current falling edge. It uses the transmitter monitoring circuit, which accurately measures turn-off time and simultaneously records the current value changes after turn-off, thus to eliminate the influence of primary field as well as to restore earlier secondary field signals for reference and finally to improve the ability to detect the shallow structure. It turns out that the new system has a shorter turn-off time, a higher linear degree of current falling and more accurate data record of turn-off current.

Travel Time Model for Right-Turning Vehicles of Secondary Street at Unsignalized Intersections

Directory of Open Access Journals (Sweden)

Feng Yu-Qin

2013-01-01

Full Text Available The travel time of right-turning vehicles on secondary street at unsignalized intersection is discussed in this paper. Under the assumption that the major-street through vehicles’ headway follows Erlang distribution and secondary-street right-turning vehicles’ headway follows Poisson distribution. The right-turning vehicles travel time model is established on the basis of gap theory and M/G/1 queue theory. Comparison is done with the common model based on the assumption that the major-street vehicles’ headway follows Poisson distribution. An intersection is selected to verify each model. The results show that the model established in this paper has stronger applicability, and its most relative error is less than 15%. In addition, the sensitivity analysis has been done. The results show that right-turning flow rate and major-street flow rate have a significant impact on the travel time. Hence, the methodology for travel time of right-turning vehicles at unsignalized intersection proposed in this paper is effective and applicable.

Point Cloud Based Relative Pose Estimation of a Satellite in Close Range

Directory of Open Access Journals (Sweden)

Lujiang Liu

2016-06-01

Full Text Available Determination of the relative pose of satellites is essential in space rendezvous operations and on-orbit servicing missions. The key problems are the adoption of suitable sensor on board of a chaser and efficient techniques for pose estimation. This paper aims to estimate the pose of a target satellite in close range on the basis of its known model by using point cloud data generated by a flash LIDAR sensor. A novel model based pose estimation method is proposed; it includes a fast and reliable pose initial acquisition method based on global optimal searching by processing the dense point cloud data directly, and a pose tracking method based on Iterative Closest Point algorithm. Also, a simulation system is presented in this paper in order to evaluate the performance of the sensor and generate simulated sensor point cloud data. It also provides truth pose of the test target so that the pose estimation error can be quantified. To investigate the effectiveness of the proposed approach and achievable pose accuracy, numerical simulation experiments are performed; results demonstrate algorithm capability of operating with point cloud directly and large pose variations. Also, a field testing experiment is conducted and results show that the proposed method is effective.

The turn team: a novel strategy for reducing pressure ulcers in the surgical intensive care unit.

Science.gov (United States)

Still, Mary D; Cross, Linda C; Dunlap, Martha; Rencher, Rugenia; Larkins, Elizabeth R; Carpenter, David L; Buchman, Timothy G; Coopersmith, Craig M

2013-03-01

Pressure ulcers cause significant morbidity and mortality in the surgical intensive care unit (SICU). The purpose of this study was to determine if a dedicated team tasked with turning and repositioning all hemodynamically stable SICU patients could decrease the formation of pressure ulcers. A total of 507 patients in a 20-bed SICU in a university hospital were assessed for pressure ulcers using a point prevalence strategy, between December 2008 and September 2010, before and after implementation of a team tasked with turning and repositioning all hemodynamically stable patients every 2 hours around the clock. At baseline, when frequent turning was encouraged but not required, a total of 42 pressure ulcers were identified in 278 patients. After implementation of the turn team, a total of 12 pressure ulcers were identified in 229 patients (p < 0.0001). The preintervention group included 34 stage I and II ulcers and 8 higher stage ulcers. After implementation of the turn team, there were 7 stage I and II ulcers and 5 higher stage ulcers. The average Braden score was 16.5 in the preintervention group and 13.4 in the postintervention group (p = 0.04), suggesting that pressure ulcers were occurring in higher risk patients after implementation of the turn team. A team dedicated to turning SICU patients every 2 hours dramatically decreased the incidence of pressure ulcers. The majority of stage I and stage II ulcers appear to be preventable with an aggressive intervention aimed at pressure ulcer prevention. Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Synthetic Aperture Computation as the Head is Turned in Binaural Direction Finding

Directory of Open Access Journals (Sweden)

Duncan Tamsett

2017-03-01

Full Text Available Binaural systems measure instantaneous time/level differences between acoustic signals received at the ears to determine angles λ between the auditory axis and directions to acoustic sources. An angle λ locates a source on a small circle of colatitude (a lamda circle on a sphere symmetric about the auditory axis. As the head is turned while listening to a sound, acoustic energy over successive instantaneous lamda circles is integrated in a virtual/subconscious field of audition. The directions in azimuth and elevation to maxima in integrated acoustic energy, or to points of intersection of lamda circles, are the directions to acoustic sources. This process in a robotic system, or in nature in a neural implementation equivalent to it, delivers its solutions to the aurally informed worldview. The process is analogous to migration applied to seismic profiler data, and to that in synthetic aperture radar/sonar systems. A slanting auditory axis, e.g., possessed by species of owl, leads to the auditory axis sweeping the surface of a cone as the head is turned about a single axis. Thus, the plane in which the auditory axis turns continuously changes, enabling robustly unambiguous directions to acoustic sources to be determined.

Turning movements, vehicle offsets and ageing drivers driving behaviour at channelized and unchannelized intersections.

Science.gov (United States)

Choi, Jaisung; Tay, Richard; Kim, Sangyoup; Jeong, Seungwon

2017-11-01

Ageing drivers experience a higher risk of intersection crashes because of their decrease in driving efficiency, including the decline in cognitive ability, head and neck flexibility, and visual acuity. Although several studies have been conducted to examine the factors associated with ageing driver crashes at intersections, little research has been conducted to examine the differences in the factors related to ageing drivers' turning paths and intersection geometric features. This study aims to improve the safety of ageing drivers at intersections by identifying the maneuvers that are risky for them and tracking their turning movements at selected intersections. We find that ageing drivers experience more crashes at intersections than younger drivers, especially crashes involving turning movements. Furthermore, ageing drivers experience more crashes at unchannelized intersections compared to channelized intersections. In addition, this study finds that ageing drivers exhibit greater and more inconsistent offsets during turning movements compared to those of younger drivers at both channelized and unchannelized intersections. Ageing drivers also tend to make relatively sharper or tighter turns than younger drivers. Hence, transportation engineers and road safety professionals should consider appropriate countermeasures to reduce the risks of crashes involving ageing drivers at intersections. Copyright © 2017 Elsevier Ltd. All rights reserved.

Crack turning in integrally stiffened aircraft structures

Science.gov (United States)

Pettit, Richard Glen

Current emphasis in the aircraft industry toward reducing manufacturing cost has created a renewed interest in integrally stiffened structures. Crack turning has been identified as an approach to improve the damage tolerance and fail-safety of this class of structures. A desired behavior is for skin cracks to turn before reaching a stiffener, instead of growing straight through. A crack in a pressurized fuselage encounters high T-stress as it nears the stiffener---a condition favorable to crack turning. Also, the tear resistance of aluminum alloys typically varies with crack orientation, a form of anisotropy that can influence the crack path. The present work addresses these issues with a study of crack turning in two-dimensions, including the effects of both T-stress and fracture anisotropy. Both effects are shown to have relation to the process zone size, an interaction that is central to this study. Following an introduction to the problem, the T-stress effect is studied for a slightly curved semi-infinite crack with a cohesive process zone, yielding a closed form expression for the future crack path in an infinite medium. For a given initial crack tip curvature and tensile T-stress, the crack path instability is found to increase with process zone size. Fracture orthotropy is treated using a simple function to interpolate between the two principal fracture resistance values in two-dimensions. An extension to three-dimensions interpolates between the six principal values of fracture resistance. Also discussed is the transition between mode I and mode II fracture in metals. For isotropic materials, there is evidence that the crack seeks out a direction of either local symmetry (pure mode I) or local asymmetry (pure mode II) growth. For orthotropic materials the favored states are not pure modal, and have mode mixity that is a function of crack orientation. Drawing upon these principles, two crack turning prediction approaches are extended to include fracture

Surface Corrosion Resistance in Turning of Titanium Alloy

Directory of Open Access Journals (Sweden)

Rui Zhang

2015-01-01

Full Text Available This work addresses the issues associated with implant surface modification. We propose a method to form the oxide film on implant surfaces by dry turning to generate heat and injecting oxygen-rich gas at the turning-tool flank. The morphology, roughness, composition, and thickness of the oxide films in an oxygen-rich atmosphere were characterized using scanning electron microscopy, optical profiling, and Auger electron spectroscopy. Electrochemical methods were used to study the corrosion resistance of the modified surfaces. The corrosion resistance trends, analyzed relative to the oxide film thickness, indicate that the oxide film thickness is the major factor affecting the corrosion resistance of titanium alloys in a simulated body fluid (SBF. Turning in an oxygen-rich atmosphere can form a thick oxide film on the implant surface. The thickness of surface oxide films processed at an oxygen concentration of 80% was improved to 4.6 times that of films processed at an oxygen concentration of 21%; the free corrosion potential shifted positively by 0.357 V, which significantly improved the corrosion resistance of titanium alloys in the SBF. Therefore, the proposed method may (partially replace the subsequent surface oxidation. This method is significant for biomedical development because it shortens the process flow, improves the efficiency, and lowers the cost.

Conservation laws for a system of two point masses in general relativity

International Nuclear Information System (INIS)

Damour, Thibaut; Deruelle, Nathalie

1981-01-01

We study the symmetries of the generalized lagrangian of two point masses, in the post-post newtonian approximation of General Relativity. We deduce, via Noether's theorem, conservation laws for energy, linear and angular momentum, as well as a generalisation of the center-of-mass theorem [fr

Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF

CERN Document Server

Farvacque, L; Scheidt, K

2001-01-01

This High-Resolution, Turn-by-Turn BPM system is a low-cost extension to the existing BPM system, based on the RF-multiplexing concept, used for slow Closed-Orbit measurements. With this extension Beam Position measurements in both planes, at all (224) BPMs in the 844 m ESRF Storage Ring, for up to 2048 Orbit Turns with 1 μm resolution are performed. The data acquisition is synchronised to a single, flat 1 μs, transverse deflection kick to the 1μs beamfill in the 2.8μs revolution period. The high quality of this synchronisation, together with the good reproducibility of the deflection kick and the overall stability of the Closed Orbit beam allows to repeat the kick and acquisition in many cycles. The subsequent averaging of the data obtained in these cycles yields the 1um resolution. The latter allows lattice measurements with high precision such as the localisation of very small focussing errors and modulation in Beta values and phase advances. It also finds an unique ...

Laterality of the lower limbs and carving turns

Directory of Open Access Journals (Sweden)

F Vaverka

2010-06-01

Full Text Available The aim of this study is to discover whether the lateral preference of the lower limbs influences the execution of successive carving turns or not. Six skilled skiers (men, right lower limb preference, age 26.5±1.61 years old, height 1.80±0.04 m, body weight 78.83±5.46 kg executed 30 (18 left, 12 right symmetrical carving turns. Kinetic analysis of the final vertical component of reaction force FZ(t measured dynamometrically provided the information about the time of initiation and steering phases of the turn and the maximum force, average force and force impulse. Differences between right and left turns are not statistically significant. Factual analyses of the magnitude of measured variables confirmed that left turns were found to have a longer duration, a shorter initiation and longer steering phase, and higher level of produced force and force impulse in comparison with right turns. Based on the results it can be concluded that the turns where the outer leg is the preferred limb are preferentially used to regulate the speed of the ride. The study of laterality in symmetrical carving turns has proven that lateral preference of lower extremities influences the execution of the turn also by expert skiers.

At a long-awaited turning point

Science.gov (United States)

Ghosh, Arindam; Krishnan, Yamuna

2014-07-01

Research in nanotechnology in India is on an upswing given the substantial investments in the past two decades. Making an impact globally will now require investing in education, entrepreneurship, translational science, infrastructure for manufacturing, and changing the administrative mindset.

Nuclear energy at the turning point

Energy Technology Data Exchange (ETDEWEB)

Weinberg, A.M.

1977-07-01

In deciding the future course of nuclear energy, it is necessary to re-examine man's long-term energy options, in particular solar energy and the breeder reactor. Both systems pose difficultiies: energy from the sun is likely to be expensive as well as limited, whereas a massive world-wide deployment of nuclear breeders will create problems of safety and of proliferation. Nuclear energy's long-term success depends on resolving both of these problems. Collocation of nuclear facilities with a system of resident inspectors are measures that ought to help increase the proliferation-resistance as well as the safety of a large-scale, long-term nuclear system based on breeders. In such a long-term system a strengthened International Atomic Energy Agency (IAEA) is viewed as playing a central role.

Training Needs Identification: A Turning Point.

Science.gov (United States)

Thomas, Edwin A.

1982-01-01

Describes a systematic approach to training needs identification that is directly tied to changing organizational events and performance requirements. The discussion includes nine questions which address performance expectations. (JJD)

Dynamic characterization of the cutting conditions in dry turning

Energy Technology Data Exchange (ETDEWEB)

Serra, R [ENI Val de Loire, Universite Francois Rabelais de Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Chibane, H [Universite Francois Rabelais, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Leroy, R, E-mail: roger.serra@univ-tours.f [Universite Francois Rabelais, Polytech' Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, 7 Avenue Marcel Dassault, 37200 Tours (France)

2009-08-01

Machining instability in the form of violent vibrations or chatter is a physical process characterized by extreme cutting force at the cutting point. The process has very negative impact on machine integrity, tool life, surface quality and dimensional accuracy. Thus it could significantly compromise productivity and manufacturing quality. In the present paper, the importance of characterization and identification of dynamic instability in dry turning operation are shown. The stability behaviour of machine vibration or chatter has been examined and the various relevant parameters are studied and discuted. For chatter detection and identification of the transition between stable and unstable states, different methods are used. Results obtained proof the accuracy of these methods.

Wittgenstein and the linguistic turn in social theory

DEFF Research Database (Denmark)

Hermansen, Jens Christian

of Winch in social theory, the wider and more recent influence of Wittgenstein in areas such as technology and science studies, social theory, feminist and gender studies and conversation and discourse analysis is also considered. Historically, the readings of Wittgenstein in the social sciences have taken...... of the linguistic turn in social theory, the linguistic turn is a double-edged sword of both profound insights and limits; the claim is that the limits of the linguistic turn are the strengths of functionalist, structuralist and materialist approaches to the social sciences. The approach of the critical turn...... is to develop a more comprehensive social theory that is sensitive to these strengths and thus supersedes the limits of the linguistic turn. This paper suggests a different approach. Against the critical turn, the paper argues that the limits of the linguistic turn are identical with the very assumptions...

Characterization of beta-turn and Asx-turns mimicry in a model peptide: stabilization via C--H . . . O interaction.

Science.gov (United States)

Thakur, A K; Kishore, R

2006-04-15

The chemical synthesis and single-crystal X-ray diffraction analysis of a model peptide, Boc-Thr-Thr-NH2 (1) comprised of proteinogenic residues bearing an amphiphilic Cbeta -stereogenic center, has been described. Interestingly, the analysis of its molecular structure revealed the existence of a distinct conformation that mimics a typical beta-turn and Asx-turns, i.e., the two Thr residues occupy the left- and right-corner positions. The main-chain torsion angles of the N- and C-terminal residues i.e., semiextended: phi = -68.9 degrees , psi = 128.6 degrees ; semifolded: phi = -138.1 degrees , psi = 2.5 degrees conformations, respectively, in conjunction with a gauche- disposition of the obligatory C-terminus Thr CgammaH3 group, characterize the occurrence of the newly described beta-turn- and Asx-turns-like topology. The preferred molecular structure is suggested to be stabilized by an effective nonconventional main-chain to side-chain Ci=O . . . H--Cgamma(i+2)-type intraturn hydrogen bond. Noteworthy, the observed topology of the resulting 10-membered hydrogen-bonded ring is essentially similar to the one perceived for a classical beta-turn and the Asx-turns, stabilized by a conventional intraturn hydrogen bond. Considering the signs as well as magnitudes of the backbone torsion angles and the orientation of the central peptide bond, the overall mimicked topology resembles the type II beta-turn or type II Asx-turns. An analysis of Xaa-Thr sequences in high-resolution X-ray elucidated protein structures revealed the novel topology prevalence in functional proteins (unpublished). In view of indubitable structural as well as functional importance of nonconventional interactions in bioorganic and biomacromolecules, we intend to highlight the participation of Thr CgammaH in the creation of a short-range C=O . . . H--Cgamma -type interaction in peptides and proteins. Copyright 2006 Wiley Periodicals, Inc.

Critical points in magnetic systems

International Nuclear Information System (INIS)

Bongaarts, A.L.M.

1975-01-01

The magnetical phase transitions of CsCoCl 3 .2H 2 O and CsCoCl 3 .2D 2 O are investigated by neutron diffraction techniques with special attention to the critical points in the phase diagrams. CsCoCl 3 .2H 2 O turned out to be a one-dimentional magnetic antiferromagnet with ferromagnetic and antiferromagnetic interactions. In the vicinity of the Neel point, the critical behavior in zero magnetic field could be described as a three-dimentional long range ordering, while the fluctuations in the system are one-dimensional. In the presence of a magnetic field, the behavior of the system in the critical region of the magnetic phase diagram between the Neel temperature at zero field (3.3degK) and 1.85degK, was in good agreement with the theory. Below 1.85degK, the phase transition in a magnetic field changes into a line of triple points whose end point could be identified as a tricritical point, i.e., an intersection of three critical lines. The parameters derived from observations in the neighborhood of this tricritical point obey the scaling laws but are not in numerical agreement with theoretical predictions

METHODICAL MODEL FOR TEACHING BASIC SKI TURN

Directory of Open Access Journals (Sweden)

Danijela Kuna

2013-07-01

Full Text Available With the aim of forming an expert model of the most important operators for basic ski turn teaching in ski schools, an experiment was conducted on a sample of 20 ski experts from different countries (Croatia, Bosnia and Herzegovina and Slovenia. From the group of the most commonly used operators for teaching basic ski turn the experts picked the 6 most important: uphill turn and jumping into snowplough, basic turn with hand sideways, basic turn with clapping, ski poles in front, ski poles on neck, uphill turn with active ski guiding. Afterwards, ranking and selection of the most efficient operators was carried out. Due to the set aim of research, a Chi square test was used, as well as the differences between frequencies of chosen operators, differences between values of the most important operators and differences between experts due to their nationality. Statistically significant differences were noticed between frequencies of chosen operators (c2= 24.61; p=0.01, while differences between values of the most important operators were not obvious (c2= 1.94; p=0.91. Meanwhile, the differences between experts concerning thier nationality were only noticeable in the expert evaluation of ski poles on neck operator (c2=7.83; p=0.02. Results of current research are reflected in obtaining useful information about methodological priciples of learning basic ski turn organization in ski schools.

Optimization of machining parameters of turning operations based on multi performance criteria

Directory of Open Access Journals (Sweden)

N.K.Mandal

2013-01-01

Full Text Available The selection of optimum machining parameters plays a significant role to ensure quality of product, to reduce the manufacturing cost and to increase productivity in computer controlled manufacturing process. For many years, multi-objective optimization of turning based on inherent complexity of process is a competitive engineering issue. This study investigates multi-response optimization of turning process for an optimal parametric combination to yield the minimum power consumption, surface roughness and frequency of tool vibration using a combination of a Grey relational analysis (GRA. Confirmation test is conducted for the optimal machining parameters to validate the test result. Various turning parameters, such as spindle speed, feed and depth of cut are considered. Experiments are designed and conducted based on full factorial design of experiment.

On some 3-point functions in the W{sub 4} CFT and related braiding matrix

Energy Technology Data Exchange (ETDEWEB)

Furlan, P. [Dipartimento di Fisica dell’Università di Trieste,Trieste (Italy); Petkova, V.B. [Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences,Sofia (Bulgaria)

2015-12-14

We construct a class of 3-point constants in the sl(4) Toda conformal theory W{sub 4}, extending the examples in Fateev and Litvinov http://dx.doi.org/10.1088/1126-6708/2007/11/002. Their knowledge allows to determine the braiding/fusing matrix transforming 4-point conformal blocks of one fundamental, labelled by the 6-dimensional sl(4) representation, and three partially degenerate vertex operators. It is a 3×3 submatrix of the generic 6×6 fusing matrix consistent with the fusion rules for the particular class of representations. We check a braiding relation which has wider applications to conformal models with sl(4) symmetry. The 3-point constants in dual regions of central charge are compared in preparation for a BPS like relation in the (sl)-hat (4) WZW model.

Experience sharing, emotional reciprocity, and turn-taking

Directory of Open Access Journals (Sweden)

Melisa eStevanovic

2015-04-01

Full Text Available In this perspective article, we consider the relationship between experience sharing and turn-taking. There is much evidence suggesting that human social interaction is permeated by two temporal organizations: (1 the sequential framework of turn-taking and (2 the concurrent framework of emotional reciprocity. From this perspective, we introduce two alternative hypotheses about how the relationship between experience sharing and turn-taking could be viewed. According to the first hypothesis, the home environment of experience sharing is in the concurrent framework of emotional reciprocity, while the motivation to share experiences is in tension with the sequential framework of turn-taking. According to the second hypothesis, then again, people’s inclination to coordinate their actions in terms of turn-taking is motivated precisely by their propensity to share experiences. We consider theoretical and empirical ideas in favor of both of these hypotheses and discuss their implications for future research.

Performance indicators related to points scoring and winning in international rugby sevens.

Science.gov (United States)

Higham, Dean G; Hopkins, Will G; Pyne, David B; Anson, Judith M

2014-05-01

Identification of performance indicators related to scoring points and winning is needed to inform tactical approaches to international rugby sevens competition. The aim of this study was to characterize team performance indicators in international rugby sevens and quantify their relationship with a team's points scored and probability of winning. Performance indicators of each team during 196 matches of the 2011/2012 International Rugby Board Sevens World Series were modeled for their linear relationships with points scored and likelihood of winning within (changes in team values from match to match) and between (differences between team values averaged over all matches) teams. Relationships were evaluated as the change and difference in points and probability of winning associated with a two within- and between-team standard deviations increase in performance indicator values. Inferences about relationships were assessed using a smallest meaningful difference of one point and a 10% probability of a team changing the outcome of a close match. All indicators exhibited high within-team match-to-match variability (intraclass correlation coefficients ranged from 0.00 to 0.23). Excluding indicators representing points-scoring actions or events occurring on average less than once per match, 13 of 17 indicators had substantial clear within-team relationships with points scored and/or likelihood of victory. Relationships between teams were generally similar in magnitude but unclear. Tactics that increase points scoring and likelihood of winning should be based on greater ball possession, fewer rucks, mauls, turnovers, penalties and free kicks, and limited passing. Key pointsSuccessful international rugby sevens teams tend to maintain ball possession; more frequently avoid taking the ball into contact; concede fewer turnovers, penalties and free kicks; retain possession in scrums, rucks and mauls; and limit passing the ball.Selected performance indicators may be used to

Primordial spectra from sudden turning trajectory

Science.gov (United States)

Noumi, Toshifumi; Yamaguchi, Masahide

2013-12-01

Effects of heavy fields on primordial spectra of curvature perturbations are discussed in inflationary models with a sudden turning trajectory. When heavy fields are excited after the sudden turn and oscillate around the bottom of the potential, the following two effects are generically induced: deformation of the inflationary background spacetime and conversion interactions between adiabatic and isocurvature perturbations, both of which can affect the primordial density perturbations. In this paper, we calculate primordial spectra in inflationary models with sudden turning potentials taking into account both of the two effects appropriately. We find that there are some non-trivial correlations between the two effects in the power spectrum and, as a consequence, the primordial scalar power spectrum has a peak around the scale exiting the horizon at the turn. Though both effects can induce parametric resonance amplifications, they are shown to be canceled out for the case with the canonical kinetic terms. The peak feature and the scale dependence of bispectra are also discussed.

An Investigation of the Relation Between Contact Thermometry and Dew-Point Temperature Realization

Science.gov (United States)

Benyon, R.; Böse, N.; Mitter, H.; Mutter, D.; Vicente, T.

2012-09-01

Precision optical dew-point hygrometers are the most commonly used transfer standards for the comparison of dew-point temperature realizations at National Metrology Institutes (NMIs) and for disseminating traceability to calibration laboratories. These instruments have been shown to be highly reproducible when properly used. In order to obtain the best performance, the resistance of the platinum resistance thermometer (PRT) embedded in the mirror is usually measured with an external, traceable resistance bridge or digital multimeter. The relation between the conventional calibration of miniature PRTs, prior to their assembly in the mirrors of state-of-the-art optical dew-point hygrometers and their subsequent calibration as dew-point temperature measurement devices, has been investigated. Standard humidity generators of three NMIs were used to calibrate hygrometers of different designs, covering the dew-point temperature range from -75 °C to + 95 °C. The results span more than a decade, during which time successive improvements and modifications were implemented by the manufacturer. The findings are presented and discussed in the context of enabling the optimum use of these transfer standards and as a basis for determining contributions to the uncertainty in their calibration.

Practical challenges related to point of care testing.

Science.gov (United States)

Shaw, Julie L V

2016-04-01

Point of care testing (POCT) refers to laboratory testing that occurs near to the patient, often at the patient bedside. POCT can be advantageous in situations requiring rapid turnaround time of test results for clinical decision making. There are many challenges associated with POCT, mainly related to quality assurance. POCT is performed by clinical staff rather than laboratory trained individuals which can lead to errors resulting from a lack of understanding of the importance of quality control and quality assurance practices. POCT is usually more expensive than testing performed in the central laboratory and requires a significant amount of support from the laboratory to ensure the quality testing and meet accreditation requirements. Here, specific challenges related to POCT compliance with accreditation standards are discussed along with strategies that can be used to overcome these challenges. These areas include: documentation of POCT orders, charting of POCT results as well as training and certification of individuals performing POCT. Factors to consider when implementing connectivity between POCT instruments and the electronic medical record are also discussed in detail and include: uni-directional versus bidirectional communication, linking patient demographic information with POCT software, the importance of positive patient identification and considering where to chart POCT results in the electronic medical record.

Charged point particles with magnetic moment in general relativity

International Nuclear Information System (INIS)

Amorim, R.; Tiomno, J.

1977-01-01

Halbwachs Lagrangean formalism for the theory of charged point particles with spin (g = 2) is generalized and formulated in General Relativity for particles of arbitrary charge and magnetic moment. Equations are obtained, both corresponding to Frenkel's condition Ssub(μν)Xsup(ν) = 0 and to Nakano's condition Ssub(μν)Psup(ν) = 0. With the later condition the exact equations are highly coupled and non linear. When linearized in the electromagnetic and gravitational fields they coincide with de Groot-Suttorp equations for vanishing gravitational fields and with Dixon-Wald equations in the absence of electromagnetic field. The equations corresponding to Frenkel's condition, when linearized in Ssub(μν), coincide with Papapetrou's and Frenkel's equations in the corresponding limits [pt

Causal Role of Motor Simulation in Turn-Taking Behavior.

Science.gov (United States)

Hadley, Lauren V; Novembre, Giacomo; Keller, Peter E; Pickering, Martin J

2015-12-16

Overlap between sensory and motor representations has been documented for a range of human actions, from grasping (Rizzolatti et al., 1996b) to playing a musical instrument (Novembre and Keller, 2014). Such overlap suggests that individuals use motor simulation to predict the outcome of observed actions (Wolpert, 1997). Here we investigate motor simulation as a basis of human communication. Using a musical turn-taking task, we show that pianists call on motor representations of their partner's part to predict when to come in for their own turn. Pianists played alternating solos with a videoed partner, and double-pulse transcranial magnetic stimulation was applied around the turn-switch to temporarily disrupt processing in two cortical regions implicated previously in different forms of motor simulation: (1) the dorsal premotor cortex (dPMC), associated with automatic motor resonance during passive observation of hand actions, especially when the actions are familiar (Lahav et al., 2007); and (2) the supplementary motor area (SMA), involved in active motor imagery, especially when the actions are familiar (Baumann et al., 2007). Stimulation of the right dPMC decreased the temporal accuracy of pianists' (right-hand) entries relative to sham when the partner's (left-hand) part had been rehearsed previously. This effect did not occur for dPMC stimulation without rehearsal or for SMA stimulation. These findings support the role of the dPMC in predicting the time course of observed actions via resonance-based motor simulation during turn-taking. Because turn-taking spans multiple modes of human interaction, we suggest that simulation is a foundational mechanism underlying the temporal dynamics of joint action. Even during passive observation, seeing or hearing somebody execute an action from within our repertoire activates motor cortices of our brain. But what is the functional relevance of such "motor simulation"? By combining a musical duet task with a real

New horizons of the theory of society at the turn of the century: from postindustrialism to neocapitalism

Directory of Open Access Journals (Sweden)

N. L. Polyakova

2016-01-01

Full Text Available The paper aims to trace the formation of new theories of society, of theories of basic social conflict and of theories of social inequality at the turn of the century. These theories are based on a theoretical scheme of “new” capitalism / neocapitalism. They also criticize the established theories of postindustrialim and knowledge society. The new theories focus on analysis of the nature of work in contemporary society, of the structures and dynamics of social inequality. The main point of the analysis carried out in the paper is that knowledge science and technology cannot be viewed as an indepentdent explanatory factor on which to base the research of the actual social relations and their transformation. The theories of postindustrialism and theories of knowledge society do precisely this and that is why they are the object of criticism in the new theories which view knowledge, science and technology as subordinate to the relations of ownership and power.

Relativity, Symmetry, and the Structure of Quantum Theory, Volume 2; Point form relativistic quantum mechanics

Science.gov (United States)

Klink, William H.; Schweiger, Wolfgang

2018-03-01

This book covers relativistic quantum theory from the point of view of a particle theory, based on the irreducible representations of the Poincaré group, the group that expresses the symmetry of Einstein relativity. There are several ways of formulating such a theory; this book develops what is called relativistic point form quantum mechanics, which, unlike quantum field theory, deals with a fixed number of particles in a relativistically invariant way. A chapter is devoted to applications of point form quantum mechanics to nuclear physics.

Zero-point length, extra-dimensions and string T-duality

OpenAIRE

Spallucci, Euro; Fontanini, Michele

2005-01-01

In this paper, we are going to put in a single consistent framework apparently unrelated pieces of information, i.e. zero-point length, extra-dimensions, string T-duality. More in details we are going to introduce a modified Kaluza-Klein theory interpolating between (high-energy) string theory and (low-energy) quantum field theory. In our model zero-point length is a four dimensional ``virtual memory'' of compact extra-dimensions length scale. Such a scale turns out to be determined by T-dual...

The QCD Critical Point and Related Observables

Energy Technology Data Exchange (ETDEWEB)

Nahrgang, Marlene

2016-12-15

The search for the critical point of QCD in heavy-ion collision experiments has sparked enormous interest with the completion of phase I of the RHIC beam energy scan. Here, I review the basics of the thermodynamics of the QCD phase transition and its implications for experimental multiplicity fluctuations in heavy-ion collisions. Several sources of noncritical fluctuations impact the observables and need to be understood in addition to the critical phenomena. Recent progress has been made in dynamical modeling of critical fluctuations, which ultimately is indispensable to understand potential signals of the QCD critical point in heavy-ion collision.

Examining the consistency relations describing the three-point functions involving tensors

International Nuclear Information System (INIS)

Sreenath, V.; Sriramkumar, L.

2014-01-01

It is well known that the non-Gaussianity parameter f NL characterizing the scalar bi-spectrum can be expressed in terms of the scalar spectral index in the squeezed limit, a property that is referred to as the consistency relation. In contrast to the scalar bi-spectrum, the three-point cross-correlations involving scalars and tensors and the tensor bi-spectrum have not received adequate attention, which can be largely attributed to the fact that the tensors had remained undetected at the level of the power spectrum until very recently. The detection of the imprints of the primordial tensor perturbations by BICEP2 and its indication of a rather high tensor-to-scalar ratio, if confirmed, can open up a new window for understanding the tensor perturbations, not only at the level of the power spectrum, but also in the realm of non-Gaussianities. In this work, we consider the consistency relations associated with the three-point cross-correlations involving scalars and tensors as well as the tensor bi-spectrum in inflationary models driven by a single, canonical, scalar field. Characterizing the cross-correlations in terms of the dimensionless non-Gaussianity parameters C NL R and C NL γ that we had introduced earlier, we express the consistency relations governing the cross-correlations as relations between these non-Gaussianity parameters and the scalar or tensor spectral indices, in a fashion similar to that of the purely scalar case. We also discuss the corresponding relation for the non-Gaussianity parameter h NL used to describe the tensor bi-spectrum. We analytically establish these consistency relations explicitly in the following two situations: a simple example involving a specific case of power law inflation and a non-trivial scenario in the so-called Starobinsky model that is governed by a linear potential with a sharp change in its slope. We also numerically verify the consistency relations in three types of inflationary models that permit deviations from

A novel hybrid method of beta-turn identification in protein using binary logistic regression and neural network.

Science.gov (United States)

Asghari, Mehdi Poursheikhali; Hayatshahi, Sayyed Hamed Sadat; Abdolmaleki, Parviz

2012-01-01

From both the structural and functional points of view, β-turns play important biological roles in proteins. In the present study, a novel two-stage hybrid procedure has been developed to identify β-turns in proteins. Binary logistic regression was initially used for the first time to select significant sequence parameters in identification of β-turns due to a re-substitution test procedure. Sequence parameters were consisted of 80 amino acid positional occurrences and 20 amino acid percentages in sequence. Among these parameters, the most significant ones which were selected by binary logistic regression model, were percentages of Gly, Ser and the occurrence of Asn in position i+2, respectively, in sequence. These significant parameters have the highest effect on the constitution of a β-turn sequence. A neural network model was then constructed and fed by the parameters selected by binary logistic regression to build a hybrid predictor. The networks have been trained and tested on a non-homologous dataset of 565 protein chains. With applying a nine fold cross-validation test on the dataset, the network reached an overall accuracy (Qtotal) of 74, which is comparable with results of the other β-turn prediction methods. In conclusion, this study proves that the parameter selection ability of binary logistic regression together with the prediction capability of neural networks lead to the development of more precise models for identifying β-turns in proteins.

MEDIACRACY TURNS INTO A SYNONYM OF MEDIOCRITY?

Directory of Open Access Journals (Sweden)

Valentina CHIPER

2014-11-01

Full Text Available The link between freedom of speech and democracy is based on ideological legitimacy report. A new phenomenon which is worth noticing is the conversion of the freedom of expression from a freedom seen in certain aspects as a solitary freedom into a communication of the masses. Another challenge is prompted by the change of the traditional communication system at the dawn of technology, Internet and its various applications, as well as of the channels used. A weak point is the change in the values scale. If a journalist or a book is deemed good or valuable in terms of competence and ideas, these values are now unfortunately inspired by what we watch on TV. In this train of thoughts, reliable opinion leaders are no longer the same. Mediacracy turns into a synonym of mediocrity with affectivity and emotion prevailing over reason and instead of the communication of thoughts and opinions.

[Study of beta-turns in globular proteins].

Science.gov (United States)

Amirova, S R; Milchevskiĭ, Iu V; Filatov, I V; Esipova, N G; Tumanian, V G

2005-01-01

The formation of beta-turns in globular proteins has been studied by the method of molecular mechanics. Statistical method of discriminant analysis was applied to calculate energy components and sequences of oligopeptide segments, and after this prediction of I type beta-turns has been drawn. The accuracy of true positive prediction is 65%. Components of conformational energy considerably affecting beta-turn formation were delineated. There are torsional energy, energy of hydrogen bonds, and van der Waals energy.

Relative stability of major types of beta-turns as a function of amino acid composition: a study based on Ab initio energetic and natural abundance data.

Science.gov (United States)

Perczel, András; Jákli, Imre; McAllister, Michael A; Csizmadia, Imre G

2003-06-06

Folding properties of small globular proteins are determined by their amino acid sequence (primary structure). This holds both for local (secondary structure) and for global conformational features of linear polypeptides and proteins composed from natural amino acid derivatives. It thus provides the rational basis of structure prediction algorithms. The shortest secondary structure element, the beta-turn, most typically adopts either a type I or a type II form, depending on the amino acid composition. Herein we investigate the sequence-dependent folding stability of both major types of beta-turns using simple dipeptide models (-Xxx-Yyy-). Gas-phase ab initio properties of 16 carefully selected and suitably protected dipeptide models (for example Val-Ser, Ala-Gly, Ser-Ser) were studied. For each backbone fold most probable side-chain conformers were considered. Fully optimized 321G RHF molecular structures were employed in medium level [B3LYP/6-311++G(d,p)//RHF/3-21G] energy calculations to estimate relative populations of the different backbone conformers. Our results show that the preference for beta-turn forms as calculated by quantum mechanics and observed in Xray determined proteins correlates significantly.

One for You, One for Me: Humans' Unique Turn-Taking Skills.

Science.gov (United States)

Melis, Alicia P; Grocke, Patricia; Kalbitz, Josefine; Tomasello, Michael

2016-07-01

Long-term collaborative relationships require that any jointly produced resources be shared in mutually satisfactory ways. Prototypically, this sharing involves partners dividing up simultaneously available resources, but sometimes the collaboration makes a resource available to only one individual, and any sharing of resources must take place across repeated instances over time. Here, we show that beginning at 5 years of age, human children stabilize cooperation in such cases by taking turns across instances of obtaining a resource. In contrast, chimpanzees do not take turns in this way, and so their collaboration tends to disintegrate over time. Alternating turns in obtaining a collaboratively produced resource does not necessarily require a prosocial concern for the other, but rather requires only a strategic judgment that partners need incentives to continue collaborating. These results suggest that human beings are adapted for thinking strategically in ways that sustain long-term cooperative relationships and that are absent in their nearest primate relatives. © The Author(s) 2016.

Turned Back: Mad Men as Intermedial Melodrama

Directory of Open Access Journals (Sweden)

Monique Rooney

2012-09-01

Full Text Available This essay draws on definitions of gesture (Giorgio Agamben and Peter Brooks and catachresis (Peter Brooks, Jacques Derrida to examine the primacy of non-verbal signifiers as communicators of meaning in AMC’s Mad Men. Beginning with an analysis of Mad Men’s credit sequence, it draws attention to Mad Men’s use of gesture and catachresis in relation to melodrama’s privileging of non-verbal and naturalistic expression and its persistence as an intermedial mode that has moved back and forth between various media (theatre, novel, cinema, television and now digital formats. It argues that Mad Men’s melodramatic aesthetic is one that obliquely, and via a gestural and rhetorical ‘turned back’, communicates its relation to the past and the present.

Energy-dependent expansion of .177 caliber hollow-point air gun projectiles.

Science.gov (United States)

Werner, Ronald; Schultz, Benno; Bockholdt, Britta; Ekkernkamp, Axel; Frank, Matthias

2017-05-01

Amongst hundreds of different projectiles for air guns available on the market, hollow-point air gun pellets are of special interest. These pellets are characterized by a tip or a hollowed-out shape in their tip which, when fired, makes the projectiles expand to an increased diameter upon entering the target medium. This results in an increase in release of energy which, in turn, has the potential to cause more serious injuries than non-hollow-point projectiles. To the best of the authors' knowledge, reliable data on the terminal ballistic features of hollow-point air gun projectiles compared to standard diabolo pellets have not yet been published in the forensic literature. The terminal ballistic performance (energy-dependent expansion and penetration) of four different types of .177 caliber hollow-point pellets discharged at kinetic energy levels from approximately 3 J up to 30 J into water, ordnance gelatin, and ordnance gelatin covered with natural chamois as a skin simulant was the subject of this investigation. Energy-dependent expansion of the tested hollow-point pellets was observed after being shot into all investigated target media. While some hollow-point pellets require a minimum kinetic energy of approximately 10 J for sufficient expansion, there are also hollow-point pellets which expand at kinetic energy levels of less than 5 J. The ratio of expansion (RE, calculated by the cross-sectional area (A) after impact divided by the cross-sectional area (A 0 ) of the undeformed pellet) of hollow-point air gun pellets reached values up of to 2.2. The extent of expansion relates to the kinetic energy of the projectile with a peak for pellet expansion at the 15 to 20 J range. To conclude, this work demonstrates that the hollow-point principle, i.e., the design-related enlargement of the projectiles' frontal area upon impact into a medium, does work in air guns as claimed by the manufacturers.

Tomographic reconstruction of transverse phase space from turn-by-turn profile data

CERN Document Server

Hancock, S; Lindroos, M

1999-01-01

Tomographic methods have the potential for useful application in beam diagnostics. The tomographic reconstruction of transverse phase space density from turn-by-turn profile data has been studied with particular attention to the effects of dispersion and chromaticity. It is shown that the modified Algebraic Reconstruction Technique (ART) that deals successfully with the problem of non-linear motion in the longitudinal plane cannot, in general, be extended to cover the transverse case. Instead, an approach is proposed in which the effect of dispersion is deconvoluted from the measured profiles before the phase space picture is reconstructed using either the modified ART algorithm or the inverse Radon Transform. This requires an accurate knowledge of the momentum distribution of the beam and the modified ART reconstruction of longitudinal phase space density yields just such information. The method has been tested extensively with simulated data.

Turning to Ontology in STS? Turning to STS through ‘Ontology’

NARCIS (Netherlands)

van Heur, B.; Leydesdorff, L.; Wyatt, S.

2012-01-01

We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology,

Geometric Spanners for Weighted Point Sets

DEFF Research Database (Denmark)

Abam, Mohammad; de Berg, Mark; Farshi, Mohammad

2009-01-01

Let (S,d) be a finite metric space, where each element p ∈ S has a non-negative weight w(p). We study spanners for the set S with respect to weighted distance function d w , where d w (p,q) is w(p) + d(p,q) + wq if p ≠ q and 0 otherwise. We present a general method for turning spanners with respect...... to the d-metric into spanners with respect to the d w -metric. For any given ε> 0, we can apply our method to obtain (5 + ε)-spanners with a linear number of edges for three cases: points in Euclidean space ℝ d , points in spaces of bounded doubling dimension, and points on the boundary of a convex body...... in ℝ d where d is the geodesic distance function. We also describe an alternative method that leads to (2 + ε)-spanners for points in ℝ d and for points on the boundary of a convex body in ℝ d . The number of edges in these spanners is O(nlogn). This bound on the stretch factor is nearly optimal...

Detection of inter-turn short-circuit at start-up of induction machine based on torque analysis

Directory of Open Access Journals (Sweden)

Pietrowski Wojciech

2017-12-01

Full Text Available Recently, interest in new diagnostics methods in a field of induction machines was observed. Research presented in the paper shows the diagnostics of induction machine based on torque pulsation, under inter-turn short-circuit, during start-up of a machine. In the paper three numerical techniques were used: finite element analysis, signal analysis and artificial neural networks (ANN. The elaborated numerical model of faulty machine consists of field, circuit and motion equations. Voltage excited supply allowed to determine the torque waveform during start-up. The inter-turn short-circuit was treated as a galvanic connection between two points of the stator winding. The waveforms were calculated for different amounts of shorted-turns from 0 to 55. Due to the non-stationary waveforms a wavelet packet decomposition was used to perform an analysis of the torque. The obtained results of analysis were used as input vector for ANN. The response of the neural network was the number of shorted-turns in the stator winding. Special attention was paid to compare response of general regression neural network (GRNN and multi-layer perceptron neural network (MLP. Based on the results of the research, the efficiency of the developed algorithm can be inferred.

How age affects pointing with mouse and touchpad

DEFF Research Database (Denmark)

Hertzum, Morten; Hornbæk, Kasper

2010-01-01

pointing with mouse and touchpad. The goal is to provide an integrated analysis of (a) how these three age groups differ in pointing performance, (b) how these differences are affected by the two pointing devices, and (c) how the submovement structure of cursor trajectories may explain performance...... neither more nor less errors than young and adult participants. All three age groups were slower and made more errors with the touchpad than the mouse, but the touchpad slowed down elderly participants more than young participants, who in turn were slowed down more than adult participants. Adult......Effects of age on pointing performance have become increasingly important as computers have become extensively used by still larger parts of the population. This study empirically investigates young (12-14 years), adult (25-33 years), and elderly (61-69 years) participants' performance when...

Predictors and use of nonpharmacologic interventions for procedural pain associated with turning among hospitalized adults.

Science.gov (United States)

Faigeles, Bonnie; Howie-Esquivel, Jill; Miaskowski, Christine; Stanik-Hutt, Julie; Thompson, Carol; White, Cheri; Wild, Lorie Rietman; Puntillo, Kathleen

2013-06-01

Many hospitalized adults cannot reposition themselves in their beds. Therefore, they are regularly turned by their nurses, primarily to prevent pressure ulcer formation. Earlier research indicates that turning is painful and that patients are rarely premedicated with analgesics. Nonpharmacologic interventions may be used to help with this painful procedure. However, no published research was found on the use of nonpharmacologic interventions for turning of hospitalized patients. The objectives of this study were: 1) to describe patient pain characteristics during turning and their association with patient demographic and clinical characteristics; 2) to determine the frequency of use of various nonpharmacologic interventions for hospitalized adult patients undergoing the painful procedure of turning; and 3) to identify factors that predict the use of specific nonpharmacologic interventions for pain associated with turning. Hospitalized adult patients who experienced turning, the nurses caring for them, and others who were present at the time of turning were asked if they used various nonpharmacologic interventions to manage pain during the turning. Out of 1,395 patients, 92.5% received at least one nonpharmacologic intervention. Most frequently used were calming voice (65.7%), information (60.6%), and deep breathing (37.9%). Critical-care patients were more likely to receive a calming voice (odds ratio [OR] 1.66, p patients. Those reporting higher pain were consistently more likely to receive each of the three interventions (OR 1.01, p turning procedure. The specific interventions used most often are ones that can be initiated spontaneously. Our data suggest that patients, nurses, and family members respond to patients' turning-related pain by using nonpharmacologic interventions. Copyright © 2013 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Injection space charge: enlargements of flux density functioning point choice

International Nuclear Information System (INIS)

Ropert, A.

In Saturne, injection consists of a synchrobetatron filling of the chamber, with the goal of providing a beam with the following characteristics circulating in the machine: horizontal flux density 90 πmm mrd, vertical flux density 210 πmm mrd, dispersion in moments +- 7 x 10 -3 , and number of particles 2 x 10 12 . The determination of the principal injection parameters was made by means of GOC calculation programs. The goal of this study is to show a certain number of phenomena induced by the forces due to space charge and left suspended up to this point: variations in the intensity injectable into the machine extension of the beam occupation zone in the ν/sub x'/ ν/sub z/ diagram, and turn-turn interactions. The effects of the space charge lead to a deterioration of the injected beam for certain functioning points leading to the selection of a zone in the ν/sub x'/ ν/sub z/ diagram that is particularly suitable for beam injection

FCC-hh turn-around cycle

CERN Document Server

Alemany Fernandez, Reyes; Bartmann, Wolfgang; Buffat, Xavier; Niemi, Arto; Schulte, Daniel; Solfaroli Camillocci, Matteo; Stoel, Linda

2016-01-01

The turn-around cycle time of a collider is defined as the time spent between the end of stable beams and the start of the next stable beams period, and its calculation is of fundamental importance. On one side it is a crucial ingredient for the computation of the optimal time spent in luminosity production, which defines the integrated luminosity per fill or store. On the other side, combined with the availability and reliability of the machine, it allows to perform a detailed breakdown of the operational performance of the collider over an operational season, i.e. percentage of time in stable beams and beam in the machine with respect to down time. This paper presents a preliminary operational cycle definition for the hadron-hadron Future Circular Collider, as a base line for estimating the corresponding turn-around time. The cycle definition is based on the Large Hadron Collider (LHC) operational cycle. Two turn-around times are presented, the theoretical one and a more realistic one based on the LHC exper...

Turning to alcohol?

International Nuclear Information System (INIS)

Reiboro, S.K.

1998-01-01

Brazil is examining whether turning to alcohol could solve its problems. The fuel alcohol producers are lobbying hard for the government to increase the use of alcohol to fuel the country's cars. Not only does using alcohol reduce CO 2 , runs the argument, but the Kyoto agreement might just attract international financing for the project. (author)

Silicon Carbide Emitter Turn-Off Thyristor

Directory of Open Access Journals (Sweden)

Jun Wang

2008-01-01

Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

Recent developments in turning hardened steels - A review

Science.gov (United States)

Sivaraman, V.; Prakash, S.

2017-05-01

Hard materials ranging from HRC 45 - 68 such as hardened AISI H13, AISI 4340, AISI 52100, D2 STL, D3 STEEL Steel etc., need super hard tool materials to machine. Turning of these hard materials is termed as hard turning. Hard turning makes possible direct machining of the hard materials and also eliminates the lubricant requirement and thus favoring dry machining. Hard turning is a finish turning process and hence conventional grinding is not required. Development of the new advanced super hard tool materials such as ceramic inserts, Cubic Boron Nitride, Polycrystalline Cubic Boron Nitride etc. enabled the turning of these materials. PVD and CVD methods of coating have made easier the production of single and multi layered coated tool inserts. Coatings of TiN, TiAlN, TiC, Al2O3, AlCrN over cemented carbide inserts has lead to the machining of difficult to machine materials. Advancement in the process of hard machining paved way for better surface finish, long tool life, reduced tool wear, cutting force and cutting temperatures. Micro and Nano coated carbide inserts, nanocomposite coated PCBN inserts, micro and nano CBN coated carbide inserts and similar developments have made machining of hardened steels much easier and economical. In this paper, broad literature review on turning of hardened steels including optimizing process parameters, cooling requirements, different tool materials etc., are done.

First turn around strategy for RHIC

International Nuclear Information System (INIS)

Milutinovic, J.; Ruggiero, A.G.

1991-01-01

The authors present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method proposed to correct a distorted closed orbit in RHIC, i.e. on a generalization of the local three-bump method. They found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In ten distributions of errors the software was capable of passing the beam through in 2-3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns

Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

Directory of Open Access Journals (Sweden)

Prabhu Raghavendra

2016-01-01

Full Text Available It is well recognized that mechanical surface enhancement methods can significantly improve the characteristics of highly-stressed metallic components. Deep cold rolling is one of such technique which is particularly attractive since it is possible to generate, near the surface, deep compressive residual stresses and work hardened layers while retaining a relatively smooth surface finish. In this paper, the effect of turn-assisted deep cold rolling on AISI 4140 steel is examined, with emphasis on the residual stress state. Based on the X-ray diffraction measurements, it is found that turn-assisted deep cold rolling can be quite effective in retarding the initiation and initial propagation of fatigue cracks in AISI 4140 steel.

Synthesis of conformationally restricted beta-turn mimics

NARCIS (Netherlands)

IJsselstijn, M.

2006-01-01

This thesis aims at developing methods for introducing conformational restriction in Beta-turns, the turn elements present in Beta-sheets. A conformationally restricted peptide might either be formed via incorporation of a bridging diamino acids in a growing peptide chain, or via covalent bond

Universal relations for differentially rotating relativistic stars at the threshold to collapse

Science.gov (United States)

Bozzola, Gabriele; Stergioulas, Nikolaos; Bauswein, Andreas

2018-03-01

A binary neutron star merger produces a rapidly and differentially rotating compact remnant whose lifespan heavily affects the electromagnetic and gravitational emissions. Its stability depends on both the equation of state (EOS) and the rotation law and it is usually investigated through numerical simulations. Nevertheless, by means of a sufficient criterion for secular instability, equilibrium sequences can be used as a computational inexpensive way to estimate the onset of dynamical instability, which, in general, is close to the secular one. This method works well for uniform rotation and relies on the location of turning points: stellar models that are stationary points in a sequence of equilibrium solutions with constant rest mass or angular momentum. Here, we investigate differentially rotating models (using a large number of EOSs and different rotation laws) and find that several universal relations between properly scaled gravitational mass, rest mass and angular momentum of the turning-point models that are valid for uniform rotation are insensitive to the degree of differential rotation, to high accuracy.

Stepping in Place While Voluntarily Turning Around Produces a Long-Lasting Posteffect Consisting in Inadvertent Turning While Stepping Eyes Closed

Directory of Open Access Journals (Sweden)

Stefania Sozzi

2016-01-01

Full Text Available Training subjects to step in place on a rotating platform while maintaining a fixed body orientation in space produces a posteffect consisting in inadvertent turning around while stepping in place eyes closed (podokinetic after-rotation, PKAR. We tested the hypothesis that voluntary turning around while stepping in place also produces a posteffect similar to PKAR. Sixteen subjects performed 12 min of voluntary turning while stepping around their vertical axis eyes closed and 12 min of stepping in place eyes open on the center of a platform rotating at 60°/s (pretests. Then, subjects continued stepping in place eyes closed for at least 10 min (posteffect. We recorded the positions of markers fixed to head, shoulder, and feet. The posteffect of voluntary turning shared all features of PKAR. Time decay of angular velocity, stepping cadence, head acceleration, and ratio of angular velocity after to angular velocity before were similar between both protocols. Both postrotations took place inadvertently. The posteffects are possibly dependent on the repeated voluntary contraction of leg and foot intrarotating pelvic muscles that rotate the trunk over the stance foot, a synergy common to both protocols. We propose that stepping in place and voluntary turning can be a scheme ancillary to the rotating platform for training body segment coordination in patients with impairment of turning synergies of various origin.

Derrida’s Turn to Franciscan Philosophy

Directory of Open Access Journals (Sweden)

Marko Zlomislic

2008-12-01

Full Text Available Contemporary French philosophers such as Levinas, Bataille, and Derrida, along with the existentialists Kierkegaard and Nietzsche have all made use of Franciscan insights in order to safeguard the ipseity that cannot be reduced or totalized. In keeping with the taste that concerns me, this paper will examine Derrida’s turn to the poetry of Gerard Manley Hopkins and how such a turn may place Derrida within a catholic and Franciscan tradition.

Emittance and damping of electrons in the neighborhood of resonance fixed points

International Nuclear Information System (INIS)

Crosbie, E.A.

1993-01-01

The stable fixed points generated by nonlinear field harmonics in a cyclic lattice define a multiturn stable orbit. The position of the orbit for each turn in each magnet of the lattice determines the betatron tunes and lattice dispersion functions describing the linear motion of charged particles with respect to the stable orbit. Since the position of the fixed points is dependent in part on the central orbit tune, it turns out that the multiturn orbit dispersion function depends to a large extent on the central orbit chromaticity. In particular, the horizontal partition number can be made to vary from values less than zero (horizontal antidamping for electrons) to values greater than three (longitudinal antidamping). The central orbit chromaticity therefore plays a major role in determining the characteristic emittance of an electron beam with respect to the multiturn orbit

Reliable tool life measurements in turning - an application to cutting fluid efficiency evaluation

DEFF Research Database (Denmark)

Axinte, Dragos A.; Belluco, Walter; De Chiffre, Leonardo

2001-01-01

The paper proposes a method to obtain reliable measurements of tool life in turning, discussing some aspects related to experimental procedure and measurement accuracy. The method (i) allows and experimental determination of the extended Taylor's equation, with a limited set of experiments and (ii......) provides efficiency evaluation. Six cutting oils, five of which formulated from vegetable basestock, were evaluated in turning. Experiments were run in a range of cutting parameters. according to a 2, 3-1 factorial design, machining AISI 316L stainless steel with coated carbide tools. Tool life...

performance characteristics of a cam turning attachment

African Journals Online (AJOL)

Dr Obe

ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

Geomediations in the Anthropocene: Fictions of the Geologic Turn

Directory of Open Access Journals (Sweden)

Alla Ivanchikova

2018-02-01

Full Text Available In both literature and philosophy, geologic matter has been imagined as a vector of extending perception and analysis into the territory of not only the nonhuman, but also the non-living, challenging the very distinctions between life and non-life, agile and inert matter. Recently, the debates over the concept of the Anthropocene amplified our fascination with the geologic, bringing into view the inescapable bond of human and Earth’s history. The article probes the possibilities of the geologic turn through two short stories published in the era of the Anthropocene debates—Margaret Atwood’s ‘Stone Mattress’ (2013 and A.S. Byatt’s ‘A Stone Woman’ (2003. The stories’ interest in a geologic setting, their staging of human-mineral intimacies, and their geologically-infused aesthetics position these two stories as fictions of the geologic turn. I examine how these writers—through reconfiguring the relations between bios and geos, human and nonhuman—forge alternatives to an extractive relation to the geos, as well as refuse to accept the figure of Earth as either an inert object or a victim. In this reframing, they also exemplify feminist critique of the imagined unity of ‘Anthropos’ that is named by the Anthropocene thinkers.

Evaluation of a Risk Awareness Perception Training Program on Novice Teen Driver Behavior at Left-Turn Intersections.

Science.gov (United States)

McDonald, Catherine C; Kandadai, Venk; Loeb, Helen; Seacrist, Thomas; Lee, Yi-Ching; Bonfiglio, Dana; Fisher, Donald L; Winston, Flaura K

Collisions at left turn intersections are among the most prevalent types of teen driver serious crashes, with inadequate surveillance as a key factor. Risk awareness perception training (RAPT) has shown effectiveness in improving hazard anticipation for latent hazards. The goal of this study was to determine if RAPT version 3 (RAPT-3) improved intersection turning behaviors among novice teen drivers when the hazards were not latent and frequent glancing to multiple locations at the intersection was needed. Teens aged 16-18 with ≤180 days of licensure were randomly assigned to: 1) an intervention group (n=18) that received RAPT-3 (Trained); or 2) a control group (n=19) that received no training (Untrained). Both groups completed RAPT-3 Baseline Assessment and the Trained group completed RAPT-3 Training and RAPT-3 Post Assessment. Training effects were evaluated on a driving simulator. Simulator ( gap selection errors and collisions ) and eye tracker ( traffic check errors) metrics from six left-turn stop sign controlled intersections in the Simulated Driving Assessment (SDA) were analyzed. The Trained group scored significantly higher in RAPT-3 Post Assessment than RAPT-3 Baseline Assessment (psign controlled intersections where the hazards were not latent. Our findings point to further research to better understand the challenges teens have with left turn intersections.

Turn over management and optimization of Shangdong nuclear power plant

International Nuclear Information System (INIS)

Zheng Tong

2014-01-01

After the equipments' installation is completed, the system will carry out commissioning tests. After commissioning work is completed, the system will be transferred to temporary operation. The plant buildings and structures will be transferred to operation for management and maintenance after civil work. The turn over work is an important part of the transfer from construction to operation. The article describes the significance of the nuclear power plant turn over work, turn over organization and management mode, the workflow of system turn over from construction to commissioning (TOP), turn over form commissioning to operation (TOTO), house hand over (HHO), building hand over (BHO) of Shandong Haiyang nuclear power plant, and analyze the current lack and future improvements of turn over work. Shandong Haiyang nuclear power plant will usher in the peak period of turn over work in 2013, fully aware of the importance of the turn over work, will play a key role in the long-term stable operation of the unit. (author)

Hatchability of chicken eggs as influenced by turning frequency in ...

African Journals Online (AJOL)

An experiment was conducted to determine the influence of turning frequency of chicken eggs on hatchability in hurricane lantern incubator. There were four treatments in which eggs were not turned in treatment one (control), those in treatment two were turned once daily (morning), treatment three turned twice daily ...

Precision lens assembly with alignment turning system

Science.gov (United States)

Ho, Cheng-Fang; Huang, Chien-Yao; Lin, Yi-Hao; Kuo, Hui-Jean; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Chen, Fong-Zhi

2017-10-01

The poker chip assembly with high precision lens barrels is widely applied to ultra-high performance optical system. ITRC applies the poker chip assembly technology to the high numerical aperture objective lenses and lithography projection lenses because of its high efficiency assembly process. In order to achieve high precision lens cell for poker chip assembly, an alignment turning system (ATS) is developed. The ATS includes measurement, alignment and turning modules. The measurement module is equipped with a non-contact displacement sensor (NCDS) and an autocollimator (ACM). The NCDS and ACM are used to measure centration errors of the top and the bottom surface of a lens respectively; then the amount of adjustment of displacement and tilt with respect to the rotational axis of the turning machine for the alignment module can be determined. After measurement, alignment and turning processes on the ATS, the centration error of a lens cell with 200 mm in diameter can be controlled within 10 arcsec. Furthermore, a poker chip assembly lens cell with three sub-cells is demonstrated, each sub-cells are measured and accomplished with alignment and turning processes. The lens assembly test for five times by each three technicians; the average transmission centration error of assembly lens is 12.45 arcsec. The results show that ATS can achieve high assembly efficiency for precision optical systems.

Development of a Low Cost MQL Setup for Turning Operations

Directory of Open Access Journals (Sweden)

Islam Sumaiya

2017-01-01

Full Text Available In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed and cutting environments (Dry, Wet and MQL. A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of tool wear. After each pass, the tool surface was examined under a microscope and the surface roughness was measured using a stylus based surface tester. The extent of tool wear from each pass is measured by using ImageJ software. Chips were collected after the five passes and were physically examined. The newly designed MQL delivery system was successful in delivering a fine mist of lubricant at the cutting point. MQL lubrication provided lower surface roughness and tool wear values compared to wet and dry conditions due to effective temperature reduction and improved lubrication penetration of cutting zones, as well as better chip flushing. Chip formed under MQL conditions had reduced chip thickness due to reduced temperatures. MQL was found to have the greatest positive impact on tool wear and surface roughness parameters based on ANOVA results.

Structural and sequence features of two residue turns in beta-hairpins.

Science.gov (United States)

Madan, Bharat; Seo, Sung Yong; Lee, Sun-Gu

2014-09-01

Beta-turns in beta-hairpins have been implicated as important sites in protein folding. In particular, two residue β-turns, the most abundant connecting elements in beta-hairpins, have been a major target for engineering protein stability and folding. In this study, we attempted to investigate and update the structural and sequence properties of two residue turns in beta-hairpins with a large data set. For this, 3977 beta-turns were extracted from 2394 nonhomologous protein chains and analyzed. First, the distribution, dihedral angles and twists of two residue turn types were determined, and compared with previous data. The trend of turn type occurrence and most structural features of the turn types were similar to previous results, but for the first time Type II turns in beta-hairpins were identified. Second, sequence motifs for the turn types were devised based on amino acid positional potentials of two-residue turns, and their distributions were examined. From this study, we could identify code-like sequence motifs for the two residue beta-turn types. Finally, structural and sequence properties of beta-strands in the beta-hairpins were analyzed, which revealed that the beta-strands showed no specific sequence and structural patterns for turn types. The analytical results in this study are expected to be a reference in the engineering or design of beta-hairpin turn structures and sequences. © 2014 Wiley Periodicals, Inc.

Diamond turning machine controller implementation

Energy Technology Data Exchange (ETDEWEB)

Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

1988-12-01

The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

Hatchability of chicken eggs as influenced by turning frequency in ...

African Journals Online (AJOL)

STORAGESEVER

2008-12-03

Dec 3, 2008 ... Brake (2004) confirmed that absence of turning resulted in presentation of the head in the small end of the egg. Egg turning facilitated the transfer of yolk nutrients to the embryo via the sub-embryonic fluid (Deeming, 1989a). With modern incubators, automatic turning devices allow the eggs to be turned on ...

The Effect of a Textured Insole on Symmetry of Turning

Directory of Open Access Journals (Sweden)

Etem Curuk

2018-01-01

Full Text Available Turning while walking is a common daily activity. Individuals with unilateral impairment frequently perform turns asymmetrically. The purpose of the study was to investigate the effect of a discomfort-inducing textured insole on symmetry of turning. Nine healthy individuals performed turns to the right while walking with no insole, immediately after the insole was inserted in the right shoe, and after walking for six minutes with the insole. The duration of turning, displacements of pelvic markers, and perceived level of discomfort were evaluated. Utilizing the insole was associated with the increased level of perceived discomfort (p<0.05. Moreover, using the insole was linked to changes in the displacement of two pelvic markers and larger asymmetry index while turning immediately after the insole was inserted in the right shoe as compared to no insole condition (p<0.05. The duration of right turning increased immediately after the insole was inserted (p<0.05 and after walking with the insole for six minutes. The results indicate that the textured insole creates asymmetry of turning in healthy individuals. The outcome provides a background for future studies focused on using a textured insole to minimize the asymmetry of turning commonly seen in individuals with unilateral impairment.

Characteristics of turn signal use at intersections in baseline naturalistic driving.

Science.gov (United States)

Sullivan, John M; Bao, Shan; Goudy, Roy; Konet, Heather

2015-01-01

The purpose of this study was to determine whether a driver's use of turn signals is sufficiently reliable to forecast a vehicle's future path around an intersection, when detailed information about the intersection is unavailable. Naturalistic observations of turn signal use among 108 drivers on surface streets were extracted from the baseline portion of a field operational test of a safety system. Left and right turns that resulted in heading changes of between 70 and 110° and turn radii between 18 and 90 m were selected from the dataset. The odds that a driver would signal a turn were modeled as a function of road type, turn direction, presence of a forward vehicle, whether the vehicle stopped before the turn, and driver age and gender. Overall, 25 percent of left turns and 29 percent of right turns were not signaled. Road type, turn direction, and presence of a forward vehicle were found to influence the odds that a turn is signaled, while gender and age of the driver did not. The results suggest that situational factors like road type and turn direction are more powerful predictors of whether a turn will be signaled than either age or gender. Signaling on major and minor surface roads was about 5 times more likely than on local roads and 1.5 times more likely when a forward vehicle was present, suggesting a possible effect of traffic volume. It was concluded that turn signal activation alone may be insufficiently reliable to forecast a driver's path. Copyright © 2014 Elsevier Ltd. All rights reserved.

Why nature doesn't turn off neurosis.

Science.gov (United States)

Badalamenti, Anthony F

2013-03-01

This paper develops an integration of psychoanalytic and wisdom tradition concepts to answer the question as to why nature does not turn off neurosis, The proposed answer is that nature wants a person to exploit the neurosis for two gains, one being the increase in adaptive capacity resulting from releasing it and the second involving the difficulty in the release itself, the latter related to gains proffered by the world's wisdom traditions. These see a movement from the psyche's creation by passive, unconscious means of finite promise rooted in parental love to creation by active, consciously chosen means of unlimited promise involving a direct relationship with nature and the Cosmos.

Analysis of the influence of tool dynamics in diamond turning

Energy Technology Data Exchange (ETDEWEB)

Fawcett, S.C.; Luttrell, D.E.; Keltie, R.F.

1988-12-01

This report describes the progress in defining the role of machine and interface dynamics on the surface finish in diamond turning. It contains a review of literature from conventional and diamond machining processes relating tool dynamics, material interactions and tool wear to surface finish. Data from experimental measurements of tool/work piece interface dynamics are presented as well as machine dynamics for the DTM at the Center.

Antiarrhythmic Drugs for Nonshockable-Turned-Shockable Out-of-Hospital Cardiac Arrest: The ALPS Study (Amiodarone, Lidocaine, or Placebo).

Science.gov (United States)

Kudenchuk, Peter J; Leroux, Brian G; Daya, Mohamud; Rea, Thomas; Vaillancourt, Christian; Morrison, Laurie J; Callaway, Clifton W; Christenson, James; Ornato, Joseph P; Dunford, James V; Wittwer, Lynn; Weisfeldt, Myron L; Aufderheide, Tom P; Vilke, Gary M; Idris, Ahamed H; Stiell, Ian G; Colella, M Riccardo; Kayea, Tami; Egan, Debra; Desvigne-Nickens, Patrice; Gray, Pamela; Gray, Randal; Straight, Ron; Dorian, Paul

2017-11-28

with amiodarone versus placebo were 2.3% (-0.3, 4.8), P =0.08, and for lidocaine versus placebo 1.2% (-1.1, 3.6), P =0.30. More than 50% of these survivors were functionally independent or required minimal assistance. Drug-related adverse effects were infrequent. Outcome from nonshockable-turned-shockable OHCA is poor but not invariably fatal. Although not statistically significant, point estimates for survival were greater after amiodarone or lidocaine than placebo, without increased risk of adverse effects or disability and consistent with previously observed favorable trends from treatment of initial shock-refractory VF/VT with these drugs. Together the findings may signal a clinical benefit that invites further investigation. URL: https://www.clinicaltrials.gov. Unique identifier: NCT01401647. © 2017 American Heart Association, Inc.

Predictors and use of non-pharmacologic interventions for procedural pain associated with turning among hospitalized adults

Science.gov (United States)

Faigeles, Bonnie; Howie-Esquivel, Jill; Miaskowski, Christine; Stanik - Hutt, Julie; Thompson, Carol; White, Cheri; Wild, Lorie Rietman; Puntillo, Kathleen

2010-01-01

Background Many hospitalized adults cannot reposition themselves in their beds. Therefore, they are regularly turned by their nurses, primarily to prevent pressure ulcer formation. Previous research indicates that turning is painful and that patients are rarely pre-medicated with analgesics. Non-pharmacologic interventions may be used to help with this painful procedure. However, no published research was found on the use of non-pharmacologic interventions for turning of hospitalized patients. Objectives 1) to describe patient pain characteristics during turning and their association with patient demographic and clinical characteristics; 2) to determine the frequency of use of various non-pharmacologic interventions for hospitalized adult patients undergoing the painful procedure of turning; and 3) to identify factors that predict the use of specific non-pharmacologic interventions for pain associated with turning. Methods Hospitalized adult patients who experienced turning, the nurses caring for them, and others who were present at the time of turning were asked if they used various non-pharmacologic interventions to manage pain during the turning. Results Of 1395 patients, 92.5% received at least one non-pharmacologic intervention. Most frequently used were calming voice (65.7%), information (60.6%), and deep breathing (37.9%). Critical care patients were more likely to receive a calming voice (OR= 1.66, ppatients. Those reporting higher pain were consistently more likely to receive each of the three interventions (OR=1.01, pturning procedure. The specific interventions used most often are ones that can be initiated spontaneously. These data suggest that patients, nurses, and family members respond to patients’ turning-related pain by using non-pharmacologic interventions. PMID:23688362

Cooling power technology at a turning point

International Nuclear Information System (INIS)

Hese, L.H.

1978-01-01

From freshwater cooling and efflux condenser cooling to wet recirculation cooling, hybrid and dry cooling towers, cooling tower technology has seen a development characterized by higher cooling tower costs and reduced power plant efficiency. Therefore, all research work done at the moment concentrates on making up for the economic losses connected with improved environmental protection. (orig.) [de

German Defense Policy At A Turning Point

Science.gov (United States)

2014-04-01

In discussing “the question of Germany’s normalizing ambitions”, Chaya Arora (2006) describes three important developments that have “added to...22). Which War to Mention?; Germany’s Russia Policy. The Economist, p. 25. Arora, Chaya . (2006). Germany’s Civilian Power Diplomacy: NATO...Dieter Dettke, Germany Says “No”, 73. 22 Ibid., 72. 23 Adrian Hyde-Price, Germany & European Order, 123. 24 Ibid., 123. 25 Ibid., 123. 26 Chaya

Theory of Nonlocal Point Transformations in General Relativity

Directory of Open Access Journals (Sweden)

Massimo Tessarotto

2016-01-01

Full Text Available A discussion of the functional setting customarily adopted in General Relativity (GR is proposed. This is based on the introduction of the notion of nonlocal point transformations (NLPTs. While allowing the extension of the traditional concept of GR-reference frame, NLPTs are important because they permit the explicit determination of the map between intrinsically different and generally curved space-times expressed in arbitrary coordinate systems. For this purpose in the paper the mathematical foundations of NLPT-theory are laid down and basic physical implications are considered. In particular, explicit applications of the theory are proposed, which concern (1 a solution to the so-called Einstein teleparallel problem in the framework of NLPT-theory; (2 the determination of the tensor transformation laws holding for the acceleration 4-tensor with respect to the group of NLPTs and the identification of NLPT-acceleration effects, namely, the relationship established via general NLPT between particle 4-acceleration tensors existing in different curved space-times; (3 the construction of the nonlocal transformation law connecting different diagonal metric tensors solution to the Einstein field equations; and (4 the diagonalization of nondiagonal metric tensors.

Measuring of roundness after turning of composite material with natural fibers

Directory of Open Access Journals (Sweden)

D. Mital

2016-12-01

Full Text Available The article is based on practical requirements from the reason of unequally removed material during the turning of the wood plastic composite (WPC. This results in geometrical deviations of the WPC bar diameter. WPC represents a relatively new group of materials that has been at the market for almost 30 years. In 1983 Lear Corporation in Wisconsine, USA made for the first time the interior panels of cars from composite materials – PP matrix with organic filler – 50 % wood flour. WPCs displace traditional materials such as wood, steel and cement materials in the marina industry. Designers are not limited technology of production from construction aspect, because different shapes and profiles can be produced by injection (resp. process of extrusion, but in the process of machining were monitored problems with tolerances. Mixed colors can be achieved by using of different pigments and one feels that this is real wood. Technologists begin to use convention technologies – drilling, milling and turning, as tendency of application of WPC increased. Knowledges about machining of WPC are not elaborate as deep as machining of metals or plastics. And this is a reason for orientation in this direction too. Commercial wood plastic composite MEGAWOOD (70 % wood flour, 30 % HDPE was a sample material in current investigation of roundness after turning of WPC. HSS EN ISO HS6-5-2 cutting tool was used. The geometry of the cutting tool was γ0 = 20°, α0 = 8°, κr = 45°, rε = 0,5 mm, εr = 90°. Cutting conditions during turning were as follows: cutting speed n = 900 m/min (constant, feed f = 0,1 to 0,61 mm, depth of cut ap = 0,5 mm for turning of final diameter d = 36 mm. It was dry turning. Roundness/cylindricity measuring system RA – 120 was used for measuring of roundness deviation. It was found that the roundness deviation increases with feed increasing. Popped heat was not used during the turning to final diameter – 36 mm. Using of popped heat

ω-Turn: a novel β-turn mimic in globular proteins stabilized by main-chain to side-chain C−H···O interaction.

Science.gov (United States)

Dhar, Jesmita; Chakrabarti, Pinak; Saini, Harpreet; Raghava, Gajendra Pal Singh; Kishore, Raghuvansh

2015-02-01

Mimicry of structural motifs is a common feature in proteins. The 10-membered hydrogen-bonded ring involving the main-chain C − O in a β-turn can be formed using a side-chain carbonyl group leading to Asx-turn. We show that the N − H component of hydrogen bond can be replaced by a C(γ) -H group in the side chain, culminating in a nonconventional C − H···O interaction. Because of its shape this β-turn mimic is designated as ω-turn, which is found to occur ∼ three times per 100 residues. Three residues (i to i + 2) constitute the turn with the C − H···O interaction occurring between the terminal residues, constraining the torsion angles ϕi + 1, ψi + 1, ϕi + 2 and χ'1(i + 2) (using the interacting C(γ) atom). Based on these angles there are two types of ω-turns, each of which can be further divided into two groups. C(β) -branched side-chains, and Met and Gln have high propensities to occur at i + 2; for the last two residues the carbonyl oxygen may participate in an additional interaction involving the S and amino group, respectively. With Cys occupying the i + 1 position, such turns are found in the metal-binding sites. N-linked glycosylation occurs at the consensus pattern Asn-Xaa-Ser/Thr; with Thr at i + 2, the sequence can adopt the secondary structure of a ω-turn, which may be the recognition site for protein modification. Location between two β-strands is the most common occurrence in protein tertiary structure, and being generally exposed ω-turn may constitute the antigenic determinant site. It is a stable scaffold and may be used in protein engineering and peptide design. © 2014 Wiley Periodicals, Inc.

Russian Turn to East on the Back of the New Anti-Russian Sanctions

Directory of Open Access Journals (Sweden)

Yu. M. Borisova

2018-01-01

Full Text Available It has been three years since the impose of anti-Russian sanctions and claimed turn to the East. It is possible to sum up some results of this politics already. Top-priority in such circumstances is China, world’s second large economy; Russian-Chinese relations “are now the best ever”. Leaders of both countries have focused on the importance of maintaining strategic partnership multiple times. While Russia turned to The East, China also chose turn to the West by declaring global “One belt — One road” initiative for development of worldwide transport and investment infrastructure in Eurasia. Moscow is the partnership of the Initiative. It was decided to cooperate in frames of Eurasian Economic Union (EAEU and Silk Road Economic Belt. However, such a high level of political communication cannot guarantee the same results in bilateral trade and economic relations. Main projects, which were agreed with the involvement of the top-officials, are in progress. Businessmen mostly have to handle with all the problems to enter new Chinese market by themselves. In addition, despite all the efforts Russia is still not developing the same good connection with other Asian countries, except Japan, South Korea and Vietnam.

Beam polarization during a Siberian snake turn-on

International Nuclear Information System (INIS)

Anferov, Vladimir A.

1999-01-01

Installing Siberian snakes in a circular proton accelerator allows one to overcome all spin depolarizing resonances even at very high energies. However, Siberian snake application at low energies is technically rather difficult. Turning snake on at some energy during acceleration would allow using Siberian snakes even in rings with low injection energies. It is shown that the beam polarization would be preserved during the snake ramp, provided that the snake is turned on in more than ten turns, and the energy is set near a half-integer Gγ

Relative criterion for validity of a semiclassical approach to the dynamics near quantum critical points.

Science.gov (United States)

Wang, Qian; Qin, Pinquan; Wang, Wen-ge

2015-10-01

Based on an analysis of Feynman's path integral formulation of the propagator, a relative criterion is proposed for validity of a semiclassical approach to the dynamics near critical points in a class of systems undergoing quantum phase transitions. It is given by an effective Planck constant, in the relative sense that a smaller effective Planck constant implies better performance of the semiclassical approach. Numerical tests of this relative criterion are given in the XY model and in the Dicke model.

Maximum power point tracker based on fuzzy logic

International Nuclear Information System (INIS)

Daoud, A.; Midoun, A.

2006-01-01

The solar energy is used as power source in photovoltaic power systems and the need for an intelligent power management system is important to obtain the maximum power from the limited solar panels. With the changing of the sun illumination due to variation of angle of incidence of sun radiation and of the temperature of the panels, Maximum Power Point Tracker (MPPT) enables optimization of solar power generation. The MPPT is a sub-system designed to extract the maximum power from a power source. In the case of solar panels power source. the maximum power point varies as a result of changes in its electrical characteristics which in turn are functions of radiation dose, temperature, ageing and other effects. The MPPT maximum the power output from panels for a given set of conditions by detecting the best working point of the power characteristic and then controls the current through the panels or the voltage across them. Many MPPT methods have been reported in literature. These techniques of MPPT can be classified into three main categories that include: lookup table methods, hill climbing methods and computational methods. The techniques vary according to the degree of sophistication, processing time and memory requirements. The perturbation and observation algorithm (hill climbing technique) is commonly used due to its ease of implementation, and relative tracking efficiency. However, it has been shown that when the insolation changes rapidly, the perturbation and observation method is slow to track the maximum power point. In recent years, the fuzzy controllers are used for maximum power point tracking. This method only requires the linguistic control rules for maximum power point, the mathematical model is not required and therefore the implementation of this control method is easy to real control system. In this paper, we we present a simple robust MPPT using fuzzy set theory where the hardware consists of the microchip's microcontroller unit control card and

First turn around strategy for RHIC

International Nuclear Information System (INIS)

Milutinovic, J.; Ruggiero, A.G.

1991-06-01

We present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method we had proposed to correct a distorted closed orbit in RHIC, i.e., on a generalization of the local three-bump method. We found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. We tested that software on ten different Gaussian distributions of dominant orbit distorting lattice imperfections. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In all of the ten distributions the software was capable of passing the beam through in 2--3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns that we had checked. The quality of the orbit, that was established in this way, was also found to be very good, i.e., the residual distortions at the places of large beta function were much less than one millimeter. With one or two monitors/correctors broken, the software established a first turn around without any extra difficulties. The quality of such orbit was, of course, somewhat degraded, especially around the broken devices. It was also observed that, in the process of actual closing, the beam develops free betatron oscillations in the amplitude range of 1--5 mm, which can be reduced either by changing the injection conditions to better match the actual closed orbit or by an appropriate damping device. The hardware proposed for RHIC is more than sufficient to meet the demands of the first turn controlling software. The maximum kick angle to be applied to the beam would require less than 2/3 of the corrector's top strength even at the top magnetic rigidity Bρ = 850 T·m, which means that the correctors will be performing an easy task at injection

The Analysis of a Wideband Strip-Helical Antenna with 1.1 Turns

Directory of Open Access Journals (Sweden)

Xihui Tang

2016-01-01

Full Text Available A wideband strip-helical antenna with 1.1 turns is analyzed numerically and experimentally. By replacing the traditional wire helix with wide metallic strip, the forward traveling current on the strip helix with about one turn smoothly decays to the minimum value at the open end of the helix. Therefore, the strip helix can excite a wideband circular polarization (CP wave with 50-ohm impedance matching. The proposed antenna is printed on a hollow-cylinder with a substrate relative permittivity of εr=2.2 and a thickness of h=0.5 mm. A 50 Ω coaxial cable is directly connected to excite the strip-helical antenna without any additional impedance matching section. The ground plane is placed below the antenna in order to provide a directional radiation pattern. To demonstrate this method, a prototype of 1.1-turn strip-helical antenna is tested. The test shows that the proposed antenna can reach an overlapped bandwidth of 46% with height of 0.52λ0, where λ0 is the wavelength in free space at the center operation frequency.

Wheelchair pushing and turning: lumbar spine and shoulder loads and recommended limits.

Science.gov (United States)

Weston, Eric B; Khan, Safdar N; Marras, William S

2017-12-01

The objective of this study was to determine how simulated manual wheelchair pushing influences biomechanical loading to the lumbar spine and shoulders. Sixty-two subjects performed simulated wheelchair pushing and turning in a laboratory. An electromyography-assisted biomechanical model was used to estimate spinal loads. Moments at the shoulder joint, external hand forces and net turning torque were also assessed. Multiple linear regression techniques were employed to develop biomechanically based wheelchair pushing guidelines relating resultant hand force or net torque to spinal load. Male subjects experienced significantly greater spinal loading (p pushing (p pushing and turning can pose biomechanical risk to the lumbar spine and shoulders. Psychophysically determined maximum acceptable push forces do not appear to be protective enough of this biomechanical risk. Practitioner Summary: This laboratory study investigated biomechanical risk to the low back and shoulders during simulated wheelchair pushing. Manual wheelchair pushing posed biomechanical risk to the lumbar spine (in compression and A/P shear) and to the shoulders. Biomechanically determined wheelchair pushing thresholds are presented and are more protective than the closest psychophysically determined equivalents.

Simulation of turn-by-turn passage of protons through the H-minus stripping foil in booster

Energy Technology Data Exchange (ETDEWEB)

Gardner, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2017-07-06

Equations for transverse emittance growth due to multiple passes of circulating proton beam through the H-minus stripping foil in Booster were developed in [1]. These were based on simple principles of statistics and simple assumptions about the initial distribution of particles incident on the foil. It was assumed there that the foil dimensions and position of the incoming beam are such that all particles hit the foil on every turn around the machine. In the present note we assume only that all incoming H-minus ions from Linac hit the foil and are stripped of their electrons. The resulting protons circulate indefinitely around the machine. Setups in which the foil width is reduced so that not all protons hit the foil on every turn are studied here by simulation. The aim is to determine the effectiveness of such setups in reducing the emittance growth of circulating proton beam during the injection of H-minus beam. The simulations also serve as a check of the equations developed in [1], and vice versa. The particulars of the simulation setup are given in Sections 1 through 11. Figures 1 through 12 show simulation results for the case in which all particles hit the foil on every turn. The results are in good agreement with those obtained from the equations of reference [1]. Figures 13 through 19 show simulation results for various setups in which the foil width is reduced. These results are summarized in Section 12. In all gures the horizontal axis gives the turn number. The unit of the vertical axis is micrometers ( m) in all plots of emittance.

Modeling Left-Turn Driving Behavior at Signalized Intersections with Mixed Traffic Conditions

Directory of Open Access Journals (Sweden)

Hong Li

2016-01-01

Full Text Available In many developing countries, mixed traffic is the most common type of urban transportation; traffic of this type faces many major problems in traffic engineering, such as conflicts, inefficiency, and security issues. This paper focuses on the traffic engineering concerns on the driving behavior of left-turning vehicles caused by different degrees of pedestrian violations. The traffic characteristics of left-turning vehicles and pedestrians in the affected region at a signalized intersection were analyzed and a cellular-automata-based “following-conflict” driving behavior model that mainly addresses four basic behavior modes was proposed to study the conflict and behavior mechanisms of left-turning vehicles by mathematic methodologies. Four basic driving behavior modes were reproduced in computer simulations, and a logit model of the behavior mode choice was also developed to analyze the relative share of each behavior mode. Finally, the microscopic characteristics of driving behaviors and the macroscopic parameters of traffic flow in the affected region were all determined. These data are important reference for geometry and capacity design for signalized intersections. The simulation results show that the proposed models are valid and can be used to represent the behavior of left-turning vehicles in the case of conflicts with illegally crossing pedestrians. These results will have potential applications on improving traffic safety and traffic capacity at signalized intersections with mixed traffic conditions.

Turning frequency in adult bedridden patients to prevent hospital-acquired pressure ulcer: A scoping review.

Science.gov (United States)

Jocelyn Chew, H-S; Thiara, Emelia; Lopez, Violeta; Shorey, Shefaly

2018-04-01

The aim of this study was to identify current research on turning frequencies of adult bed-bound patients and inform future turning practices for hospitals based on evidence-based practice. We undertook a scoping review framework that provided a transparent and systematic methodology using 8 electronic databases (CINAHL, PubMed, Cochrane Library, ScienceDirect, PsycINFO, Scopus, ProQuest, and Web of Science) to identify articles published from 2000 to 2016. Articles were included if they focused on the prevention of hospital-acquired pressure ulcers related to the frequency of turning or repositioning of bed-bound patients. Literature search and data extraction were performed independently by 3 authors. The study followed the PRISMA guidelines. In total, 911 articles were identified, of which 10 were eligible. Of the eligible articles, 8 studies could not reach a conclusion on the effective frequency of turning and duration for repositioning patients to prevent the development of pressure ulcers. Only 2 studies found significant differences among the intervention and control groups. Results regarding turning and repositioning schedules are inconclusive; however, the topic needs further exploration to improve the outdated guidelines surrounding pressure ulcer prevention. This may, in turn, make the work of nurses more efficient and make treatment cost-effective for both the patients and the hospitals. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Postural hemodynamic changes after turning to prone position

Directory of Open Access Journals (Sweden)

Микола Віталійович Лизогуб

2015-03-01

Full Text Available Background of study. Prone position is one of the most complex positions for anesthesiologist as it is accompanied by several physiological changes that can lead to specific complications. Hemodynamic changes are most controversial.Aim of study was to establish hemodynamic changes in non-anaesthetized patients in prone position depending on body mass index.Material and methods. We examined central hemodynamics in 40 patients the day before surgery using thoracic rheography in supine position, in prone position 5 min after turning and in prone position 20 min after turning. Patients were divided into 2 groups according to body mass index (18-25 and 26-35.Results. Patients with normal body weight did not have any hemodynamic changes after turning to prone position. Patients with increased body weight had higher cardiac index. After turning to prone position obese patients’ cardiac output and cardiac index reduced 22% comparing with supine position. After 20 min in prone position these hemodynamic parameters were found to be reduced to the same level.Conclusion. Significant hemodynamic changes after turning from supine to prone position were revealed only in patients with increased body mass index. In these patients cardiac index in prone position was reduced by 22% comparing to supine position

RUNX1/AML1 point mutations take part in the pathogenesis of radiation-and therapy-related myeloid neoplasms

International Nuclear Information System (INIS)

Harada, Yuka; Kimura, Akiro; Harada, Hironori

2012-01-01

High frequency of myelodysplastic syndrome (MDS) has been reported in Hiroshima A-bomb exposed survivors, in resident around Semipalatinsk Nuclear Laboratory and in exposed people by Chernobyl Nuclear Power Station Accident. MDS/acute myeloid leukemia (AML) is thought to be caused by mutation of runt-related transcription factor 1 (RUNX1) gene after a long time post exposure to relatively low dose radiation. In this study, participation of RUNX1/AML1 point mutations was examined in pathogenesis of the title neoplasms experienced in authors' facility. Subjects were 18/417 cases in whom myeloproliferative neoplasms (MPN) had switched to MDS or AML in the follow-up period of 1-25 years, and 11/124 cases in whom t-MN (therapy-related myeloid neoplasms) had developed during the remission of acute promyelocytic leukemia (APL) in the 1-9.7 years follow up. Point mutations were analyzed by PCR-single strand conformation polymorphism (PCR-SSCP) followed by base sequencing. In the former cases above, RUNX1 point mutation was found in 5/18 cases and in the latter, 4/11. When patients with persistent decrease of blood cells post therapy of APL were followed up for mutation, their RUNX1 point mutation was detected before they were diagnosed to be morbid of MDS/AML. The point mutation was thus a biomarker of myelo-hematogenic cancer, and was thought useful for early diagnosis of MDS and AML. (T.T.)

Turning around Newton's Second Law

Science.gov (United States)

Goff, John Eric

2004-01-01

Conceptual and quantitative difficulties surrounding Newton's second law often arise among introductory physics students. Simply turning around how one expresses Newton's second law may assist students in their understanding of a deceptively simple-looking equation.

Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas

Science.gov (United States)

Central Ohio Turns Trash Into Natural Gas to someone by E-mail Share Alternative Fuels Data Center : Central Ohio Turns Trash Into Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Central Ohio Turns

Power Prediction Model for Turning EN-31 Steel Using Response Surface Methodology

Directory of Open Access Journals (Sweden)

M. Hameedullah

2010-01-01

Full Text Available Power consumption in turning EN-31 steel (a material that is most extensively used in automotive industry with tungstencarbide tool under different cutting conditions was experimentally investigated. The experimental runs were planned accordingto 24+8 added centre point factorial design of experiments, replicated thrice. The data collected was statisticallyanalyzed using Analysis of Variance technique and first order and second order power consumption prediction models weredeveloped by using response surface methodology (RSM. It is concluded that second-order model is more accurate than thefirst-order model and fit well with the experimental data. The model can be used in the automotive industries for decidingthe cutting parameters for minimum power consumption and hence maximum productivity

Turning nuclear communications inside out

International Nuclear Information System (INIS)

Besenyei, Elisabeth; Czibolya, Laszlo

2002-01-01

Due to debates on the security of energy supply in the European Union, the international efforts on the implementation of Kyoto protocol and the forthcoming liberalization of the electrical energy market the attention of Hungarian decision-makers was focused on energy related problems. Discussions started on the future role of nuclear power and anti-nuclear environmentalists became more active in their criticism. Changes were needed in the approach and practice of communication on nuclear energy. Previous practice turned to be inefficient in dialogue with different social and influential groups. Public information could not be considered any more as an activity explaining measures to cope with incidents and accidents or giving technical answers to mostly superficial statements on allegedly unsafe features and solutions in nuclear industry. It was time to change the paradigm and to turn the communication into a powerful tool to put forward the arguments, to show the achievements and facts and to explain the efforts in addressing public concerns. The new paradigm turned the previous outside-in approach to a new inside-out type of behavior. Instead of reacting to the attacks coming from outside the new approach means first of all commitment to be open and pro-active in communication and to act in close cooperation with all interested organizations and institutions. The three pillars of the new paradigm, commitment, communication and co-operation are applicable not only for the nuclear industry, but also for the governmental agencies (regulatory bodies, health and emergency authorities etc.) and for the wide range of technical, scientific and civil organizations. Public information should be turned from a burden to a challenge for open, technically valid and honest dialogue. This active communication approach is illustrated by some new initiatives in public information in Hungary. Following the successful Nuclear Academy for Journalists formed new Section of Nuclear

Minimum-fuel turning climbout and descent guidance of transport jets

Science.gov (United States)

Neuman, F.; Kreindler, E.

1983-01-01

The complete flightpath optimization problem for minimum fuel consumption from takeoff to landing including the initial and final turns from and to the runway heading is solved. However, only the initial and final segments which contain the turns are treated, since the straight-line climbout, cruise, and descent problems have already been solved. The paths are derived by generating fields of extremals, using the necessary conditions of optimal control together with singular arcs and state constraints. Results show that the speed profiles for straight flight and turning flight are essentially identical except for the final horizontal accelerating or decelerating turns. The optimal turns require no abrupt maneuvers, and an approximation of the optimal turns could be easily integrated with present straight-line climb-cruise-descent fuel-optimization algorithms. Climbout at the optimal IAS rather than the 250-knot terminal-area speed limit would save 36 lb of fuel for the 727-100 aircraft.

A review of governmental management accounting : research around the turn of the century

NARCIS (Netherlands)

Helden, G. Jan van

2003-01-01

This paper shows that governmental management accounting research around the turn of the century, as published in FAM, MAR and EAR, is different from general management accounting research in some respects. Although there are variations related to topics, theories and research methods, a mainstream

Differences in axial segment reorientation during standing turns predict multiple falls in older adults.

Science.gov (United States)

Wright, Rachel L; Peters, Derek M; Robinson, Paul D; Sitch, Alice J; Watt, Thomas N; Hollands, Mark A

2012-07-01

The assessment of standing turning performance is proposed to predict fall risk in older adults. This study investigated differences in segmental coordination during a 360° standing turn task between older community-dwelling fallers and non-fallers. Thirty-five older adults age mean (SD) of 71 (5.4) years performed 360° standing turns. Head, trunk and pelvis position relative to the laboratory and each other were recorded using a Vicon motion analysis system. Fall incidence was monitored by monthly questionnaire over the following 12 months and used to identify non-faller, single faller and multiple faller groups. Multiple fallers were found to have significantly different values, when compared to non-fallers, for pelvis onset (p=0.002); mean angular separation in the transverse plane between the head and trunk (p=0.018); peak angular separation in the transverse plane between the trunk and pelvis (p=0.013); and mean angular separation between the trunk and pelvis (pfalls show a simplified turning pattern to assist in balance control. This may be a predictor for those at increased risk of falling. Copyright © 2012 Elsevier B.V. All rights reserved.

History of Education in Canada: Historiographic "Turns" and Widening Horizons

Science.gov (United States)

Bruno-Jofré, Rosa

2014-01-01

This paper explores major historiographic "turns" in history of education with a focus, although not exclusively, on English-speaking Canada. It addresses the transformative intellectual impact of the turn toward social history on the history of education, the impact of cultural history and the linguistic turn, the reception of Michel…

The narcissism and death of Yukio Mishima--from the object relational point of view.

Science.gov (United States)

Ushijima, S

1987-12-01

The author discussed the life and work of Yukio Mishima from the object relational point of view. First, he described his brief life history, pointing out the four big identity crises in his life as his fierce struggles against the suicidal wishes were likely to enlarge within himself. Then, he suggested that Mishima had been in the state of part object relationship throughout his life. Thirdly, the important role of the body or bodies in his fantastic and real life was discussed as a manifestation of not merely autoerotic activities but also disturbances of the core of identity. Finally, the fragility of the intermediate area of experience which was thought to have eventually led him to the last action, the seppuku, was examined.

Impacts of Satellite Orbit and Clock on Real-Time GPS Point and Relative Positioning.

Science.gov (United States)

Shi, Junbo; Wang, Gaojing; Han, Xianquan; Guo, Jiming

2017-06-12

Satellite orbit and clock corrections are always treated as known quantities in GPS positioning models. Therefore, any error in the satellite orbit and clock products will probably cause significant consequences for GPS positioning, especially for real-time applications. Currently three types of satellite products have been made available for real-time positioning, including the broadcast ephemeris, the International GNSS Service (IGS) predicted ultra-rapid product, and the real-time product. In this study, these three predicted/real-time satellite orbit and clock products are first evaluated with respect to the post-mission IGS final product, which demonstrates cm to m level orbit accuracies and sub-ns to ns level clock accuracies. Impacts of real-time satellite orbit and clock products on GPS point and relative positioning are then investigated using the P3 and GAMIT software packages, respectively. Numerical results show that the real-time satellite clock corrections affect the point positioning more significantly than the orbit corrections. On the contrary, only the real-time orbit corrections impact the relative positioning. Compared with the positioning solution using the IGS final product with the nominal orbit accuracy of ~2.5 cm, the real-time broadcast ephemeris with ~2 m orbit accuracy provided <2 cm relative positioning error for baselines no longer than 216 km. As for the baselines ranging from 574 to 2982 km, the cm-dm level positioning error was identified for the relative positioning solution using the broadcast ephemeris. The real-time product could result in <5 mm relative positioning accuracy for baselines within 2982 km, slightly better than the predicted ultra-rapid product.

Impacts of Satellite Orbit and Clock on Real-Time GPS Point and Relative Positioning

Directory of Open Access Journals (Sweden)

Junbo Shi

2017-06-01

Full Text Available Satellite orbit and clock corrections are always treated as known quantities in GPS positioning models. Therefore, any error in the satellite orbit and clock products will probably cause significant consequences for GPS positioning, especially for real-time applications. Currently three types of satellite products have been made available for real-time positioning, including the broadcast ephemeris, the International GNSS Service (IGS predicted ultra-rapid product, and the real-time product. In this study, these three predicted/real-time satellite orbit and clock products are first evaluated with respect to the post-mission IGS final product, which demonstrates cm to m level orbit accuracies and sub-ns to ns level clock accuracies. Impacts of real-time satellite orbit and clock products on GPS point and relative positioning are then investigated using the P3 and GAMIT software packages, respectively. Numerical results show that the real-time satellite clock corrections affect the point positioning more significantly than the orbit corrections. On the contrary, only the real-time orbit corrections impact the relative positioning. Compared with the positioning solution using the IGS final product with the nominal orbit accuracy of ~2.5 cm, the real-time broadcast ephemeris with ~2 m orbit accuracy provided <2 cm relative positioning error for baselines no longer than 216 km. As for the baselines ranging from 574 to 2982 km, the cm–dm level positioning error was identified for the relative positioning solution using the broadcast ephemeris. The real-time product could result in <5 mm relative positioning accuracy for baselines within 2982 km, slightly better than the predicted ultra-rapid product.

a Gross Error Elimination Method for Point Cloud Data Based on Kd-Tree

Science.gov (United States)

Kang, Q.; Huang, G.; Yang, S.

2018-04-01

Point cloud data has been one type of widely used data sources in the field of remote sensing. Key steps of point cloud data's pro-processing focus on gross error elimination and quality control. Owing to the volume feature of point could data, existed gross error elimination methods need spend massive memory both in space and time. This paper employed a new method which based on Kd-tree algorithm to construct, k-nearest neighbor algorithm to search, settled appropriate threshold to determine with result turns out a judgement that whether target point is or not an outlier. Experimental results show that, our proposed algorithm will help to delete gross error in point cloud data and facilitate to decrease memory consumption, improve efficiency.

A GROSS ERROR ELIMINATION METHOD FOR POINT CLOUD DATA BASED ON KD-TREE

Directory of Open Access Journals (Sweden)

Q. Kang

2018-04-01

Full Text Available Point cloud data has been one type of widely used data sources in the field of remote sensing. Key steps of point cloud data’s pro-processing focus on gross error elimination and quality control. Owing to the volume feature of point could data, existed gross error elimination methods need spend massive memory both in space and time. This paper employed a new method which based on Kd-tree algorithm to construct, k-nearest neighbor algorithm to search, settled appropriate threshold to determine with result turns out a judgement that whether target point is or not an outlier. Experimental results show that, our proposed algorithm will help to delete gross error in point cloud data and facilitate to decrease memory consumption, improve efficiency.

Turn-taking cue delays in human-robot communication

NARCIS (Netherlands)

Cuijpers, R. H.; Van Den Goor, V. J.P.

2017-01-01

Fluent communication between a human and a robot relies on the use of effective turn-taking cues. In human speech staying silent after a sequence of utterances is usually accompanied by an explicit turnyielding cue to signal the end of a turn. Here we study the effect of the timing of four

Human Rights Education and the Post Secular Turn

Science.gov (United States)

Bowie, Bob

2012-01-01

This article questions whether human rights education (HRE) scholarship is responding adequately to the post secular turn in thinking about the place and nature of religion in society. Here the post secular turn is used to describe the discrediting of secularisation theory, the recognition of religion as an enduring and pervasive global cultural…

Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

Science.gov (United States)

Petrenko, A. V.; Valishev, A. A.; Lebedev, V. A.

2011-09-01

Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA) technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM) as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

Directory of Open Access Journals (Sweden)

A. V. Petrenko

2011-09-01

Full Text Available Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

Characterization of jellyfish turning using 3D-PTV

Science.gov (United States)

Xu, Nicole; Dabiri, John

2017-11-01

Aurelia aurita are oblate, radially symmetric jellyfish that consist of a gelatinous bell and subumbrellar muscle ring, which contracts to provide motive force. Swimming is typically modeled as a purely vertical motion; however, asymmetric activations of swim pacemakers (sensory organs that innervate the muscle at eight locations around the bell margin) result in turning and more complicated swim behaviors. More recent studies have examined flow fields around turning jellyfish, but the input/output relationship between locomotive controls and swim trajectories is unclear. To address this, bell kinematics for both straight swimming and turning are obtained using 3D particle tracking velocimetry (3D-PTV) by injecting biocompatible elastomer tags into the bell, illuminating the tank with ultraviolet light, and tracking the resulting fluorescent particles in a multi-camera setup. By understanding these kinematics in both natural and externally controlled free-swimming animals, we can connect neuromuscular control mechanisms to existing flow measurements of jellyfish turning for applications in designing more energy efficient biohybrid robots and underwater vehicles. NSF GRFP.

Zigzag turning preference of freely crawling cells.

Directory of Open Access Journals (Sweden)

Taeseok Daniel Yang

Full Text Available The coordinated motion of a cell is fundamental to many important biological processes such as development, wound healing, and phagocytosis. For eukaryotic cells, such as amoebae or animal cells, the cell motility is based on crawling and involves a complex set of internal biochemical events. A recent study reported very interesting crawling behavior of single cell amoeba: in the absence of an external cue, free amoebae move randomly with a noisy, yet, discernible sequence of 'run-and-turns' analogous to the 'run-and-tumbles' of swimming bacteria. Interestingly, amoeboid trajectories favor zigzag turns. In other words, the cells bias their crawling by making a turn in the opposite direction to a previous turn. This property enhances the long range directional persistence of the moving trajectories. This study proposes that such a zigzag crawling behavior can be a general property of any crawling cells by demonstrating that 1 microglia, which are the immune cells of the brain, and 2 a simple rule-based model cell, which incorporates the actual biochemistry and mechanics behind cell crawling, both exhibit similar type of crawling behavior. Almost all legged animals walk by alternating their feet. Similarly, all crawling cells appear to move forward by alternating the direction of their movement, even though the regularity and degree of zigzag preference vary from one type to the other.

Effects of turning and through lane sharing on traffic performance at intersections

Science.gov (United States)

Li, Xiang; Sun, Jian-Qiao

2016-02-01

Turning vehicles strongly influence traffic flows at intersections. Effective regulation of turning vehicles is important to achieve better traffic performance. This paper studies the impact of lane sharing and turning signals on traffic performance at intersections by using cellular automata. Both right-turn and left-turn lane sharing are studied. Interactions between vehicles and pedestrians are considered. The transportation efficiency, road safety and energy economy are the traffic performance metrics. Extensive simulations are carried out to study the traffic performance indices. It is observed that shared turning lanes and permissive left-turn signal improve the transportation efficiency and reduce the fuel consumption in most cases, but the safety is usually sacrificed. It is not always beneficial for the through vehicles when they are allowed to be in the turning lanes.

One-turn stub-loaded loop patch antenna on a small ground plane

DEFF Research Database (Denmark)

Thaysen, Jesper; Jakobsen, Kaj Bjarne

2005-01-01

A small 1.1-cm3 one-turn loop patch antenna located 2.5 mm above an 18 × 25 mm ground plane separated by a dielectric substrate with relative permittivity of 9.8 is presented. By varying the length of a thin quarter-wavelength matching line, it is possible to change the resonant frequency. An RLC...

Phenomenology and the Empirical Turn

NARCIS (Netherlands)

Zwier, Jochem; Blok, Vincent; Lemmens, Pieter

2016-01-01

This paper provides a phenomenological analysis of postphenomenological philosophy of technology. While acknowledging that the results of its analyses are to be recognized as original, insightful, and valuable, we will argue that in its execution of the empirical turn, postphenomenology forfeits

How reverse turns may mediate the formation of helical segments in proteins: an x-ray model.

OpenAIRE

Perczel, A; Foxman, B M; Fasman, G D

1992-01-01

The three-dimensional structure of a protein is the assembly of different secondary structural elements, such as alpha-helices, beta-pleated sheets, and beta-turns. Although the conformation of hundreds of proteins has been elaborated in the solid state, only a vague understanding of the mechanism of their conformational folding is known. One facet of this topic is the conformational interconversion of one or more beta-turns to a helical structure (and vice versa), which may also be related t...

Evaluation of the i-STAT point-of-care analyzer in critically ill adult patients.

NARCIS (Netherlands)

Steinfelder-Visscher, J.; Teerenstra, S.; Klein Gunnewiek, J.M.T.; Weerwind, P.W.

2008-01-01

Point-of-care analyzers may benefit therapeutic decision making by reducing turn-around-time for samples. This is especially true when biochemical parameters exceed the clinical reference range, in which acute and effective treatment is essential. We therefore evaluated the analytical performance of

Joint classification and contour extraction of large 3D point clouds

Science.gov (United States)

Hackel, Timo; Wegner, Jan D.; Schindler, Konrad

2017-08-01

We present an effective and efficient method for point-wise semantic classification and extraction of object contours of large-scale 3D point clouds. What makes point cloud interpretation challenging is the sheer size of several millions of points per scan and the non-grid, sparse, and uneven distribution of points. Standard image processing tools like texture filters, for example, cannot handle such data efficiently, which calls for dedicated point cloud labeling methods. It turns out that one of the major drivers for efficient computation and handling of strong variations in point density, is a careful formulation of per-point neighborhoods at multiple scales. This allows, both, to define an expressive feature set and to extract topologically meaningful object contours. Semantic classification and contour extraction are interlaced problems. Point-wise semantic classification enables extracting a meaningful candidate set of contour points while contours help generating a rich feature representation that benefits point-wise classification. These methods are tailored to have fast run time and small memory footprint for processing large-scale, unstructured, and inhomogeneous point clouds, while still achieving high classification accuracy. We evaluate our methods on the semantic3d.net benchmark for terrestrial laser scans with >109 points.

Transparent lattice characterization with gated turn-by-turn data of diagnostic bunch train

Science.gov (United States)

Li, Yongjun; Cheng, Weixing; Ha, Kiman; Rainer, Robert

2017-11-01

Methods of characterization of a storage ring's lattice have traditionally been intrusive to routine operations. More importantly, the lattice seen by particles can drift with the beam current due to collective effects. To circumvent this, we have developed a novel approach for dynamically characterizing a storage ring's lattice that is transparent to operations. Our approach adopts a dedicated filling pattern which has a short, separate diagnostic bunch train (DBT). Through the use of a bunch-by-bunch feedback system, the DBT can be selectively excited on demand. Gated functionality of a beam position monitor system is capable of collecting turn-by-turn data of the DBT, from which the lattice can then be characterized after excitation. As the DBT comprises only about one percent of the total operational bunches, the effects of its excitation are negligible to users. This approach allows us to localize the distributed quadrupolar wakefields generated in the storage ring vacuum chamber during beam accumulation. While effectively transparent to operations, our approach enables us to dynamically control the beta beat and phase beat, and unobtrusively optimize performance of the National Synchrotron Light Source-II accelerator during routine operations.

Zero-point length from string fluctuations

International Nuclear Information System (INIS)

Fontanini, Michele; Spallucci, Euro; Padmanabhan, T.

2006-01-01

One of the leading candidates for quantum gravity, viz. string theory, has the following features incorporated in it. (i) The full spacetime is higher-dimensional, with (possibly) compact extra-dimensions; (ii) there is a natural minimal length below which the concept of continuum spacetime needs to be modified by some deeper concept. On the other hand, the existence of a minimal length (zero-point length) in four-dimensional spacetime, with obvious implications as UV regulator, has been often conjectured as a natural aftermath of any correct quantum theory of gravity. We show that one can incorporate the apparently unrelated pieces of information-zero-point length, extra-dimensions, string T-duality-in a consistent framework. This is done in terms of a modified Kaluza-Klein theory that interpolates between (high-energy) string theory and (low-energy) quantum field theory. In this model, the zero-point length in four dimensions is a 'virtual memory' of the length scale of compact extra-dimensions. Such a scale turns out to be determined by T-duality inherited from the underlying fundamental string theory. From a low energy perspective short distance infinities are cutoff by a minimal length which is proportional to the square root of the string slope, i.e., α ' . Thus, we bridge the gap between the string theory domain and the low energy arena of point-particle quantum field theory

Expectation of fairness: a turning point in the professional satisfaction of Iranian nurses.

Science.gov (United States)

Rafii, Forough; Nasrabadi, Alireza Nikbakht; Forooshani, Zahra Sadat Dibaji

2016-06-01

The professional satisfaction of staff is one of the most challenging organizational concepts that can enhance the efficiency level of organizations. In a similar vein, the professional satisfaction of nurses is of considerable importance, in that, professional dissatisfaction among nurses could result in emotional detachment, depression, anger, evasion from work, and inefficacy and would negatively impact the organization's work rate. The aim of this study was to understand Iranian nurses' experiences of the concept of professional satisfaction. This was a qualitative study conducted with a targeted sampling of 10 nurses (4 men and 6 women) in 2015. The data were collected through conducting in-depth interviews, and textual data were analyzed subsequently using the Qualitative Content Analysis (QCA) method. The findings of this study pointed to "fair conduct," which was comprised of three sub-categories, i.e., expectation of fairness in social-professional settings, expectation of fairness in receiving professional benefits, and expectation of fairness in the area of professional interactions. There are various ups and downs in nursing due to the challenging nature of the profession, from the initial education at the university until retirement. According to the findings of this study, a lack of fairness in social-professional settings, a lack of fairness in receiving professional benefits, and a lack of fairness in the area of professional interactions were among the factors that have great impacts on the degree of professional dissatisfaction among nurses.

Density of Plutonium Turnings Generated from Machining Activities

Energy Technology Data Exchange (ETDEWEB)

Gonzales, John Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Duane M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jachimowski, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Archuleta, Alonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Arellano, Gerald Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Melton, Vince Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-10-20

The purpose of this project was to determine the density of plutonium (Pu) turnings generated from the range of machining activities, using both surrogate material and machined Pu turnings. Verify that 500 grams (g) of plutonium will fit in a one quart container using a surrogate equivalent volume and that 100 grams of Pu will fit in a one quart Savy container.

Rare event simulation for stochastic fixed point equations related to the smoothing transform

DEFF Research Database (Denmark)

Collamore, Jeffrey F.; Vidyashankar, Anand N.; Xu, Jie

2013-01-01

In several applications arising in computer science, cascade theory, and other applied areas, it is of interest to evaluate the tail probabilities of non-homogeneous stochastic fixed point equations. Recently, techniques have been developed for the related linear recursions, yielding tail estimates...... and importance sampling methods for these recursions. However, such methods do not routinely generalize to non-homogeneous recursions. Drawing on techniques from the weighted branching process literature, we present a consistent, strongly efficient importance sampling algorithm for estimating the tail...

Formation of field reversed configurations in a slow, multi-turn coil system: Appendix B

International Nuclear Information System (INIS)

Slough, J.T.; Hoffman, A.L.

1987-01-01

A previous field-reversed theta pinch, TRX-1, has been modified by replacing the single turn main compression coil with an array of three-turn coils. Field reversed configurations (FRCs) have been formed at relatively low values of azimuthal electric field, where ohmic dissipation and axial compressive heating are substituted for the radial shock heating which is dominant in high voltage theta pinches. The longer magnetic field risetime has allowed various controls to be applied to the formation timing, so that the axial implosion can be made to coincide with the peak of the applied magnetic field. This 'programmed formation' control results in maximum plasma heating, and minimizes the formation dynamics

The art of anger: reward context turns avoidance responses to anger-related objects into approach.

Science.gov (United States)

Aarts, Henk; Ruys, Kirsten I; Veling, Harm; Renes, Robert A; de Groot, Jasper H B; van Nunen, Anna M; Geertjes, Sarit

2010-10-01

Anger has a special status among the emotions in that it can elicit avoidance as well as approach motivation. This study tested the ignored role of reward context in potentiating approach rather than avoidance responses toward objects associated with anger. In Experiment 1, angry and neutral facial expressions were parafoveally paired with common objects, and responses to the objects were assessed by subjective reports of motivation to obtain them. In Experiment 2, objects were again paired with angry or neutral faces outside of participants' awareness, and responses toward the objects were indexed by physical effort expended in attempting to win them. Results showed that approach motivation toward anger-related objects can be observed when responding is framed in terms of rewards that one can obtain, whereas avoidance motivation occurs in the absence of such a reward context. These findings point to the importance of a reward context in modulating people's responses to anger.

Surface roughness and cutting force estimation in the CNC turning using artificial neural networks

Directory of Open Access Journals (Sweden)

Mohammad Ramezani

2015-04-01

Full Text Available Surface roughness and cutting forces are considered as important factors to determine machinability rate and the quality of product. A number of factors like cutting speed, feed rate, depth of cutting and tool noise radius influence the surface roughness and cutting forces in turning process. In this paper, an Artificial Neural Network (ANN model was used to forecast surface roughness and cutting forces with related inputs, including cutting speed, feed rate, depth of cut and tool noise radius. The machined surface roughness and cutting force parameters related to input parameters are the outputs of the ANN model. In this work, 24 samples of experimental data were used to train the network. Moreover, eight other experimental tests were implemented to test the network. The study concludes that ANN was a reliable and accurate method for predicting machining parameters in CNC turning operation.

Tool life of ceramic wedges during precise turning of tungsten

Directory of Open Access Journals (Sweden)

Legutko Stanislaw

2017-01-01

Full Text Available Properties, application and machinability of tungsten and its alloys have been demonstrated. The comparison of the tool life and wear of the wedges made of SiAlON and whisker ceramics during the precise turning at different cutting parameters have been presented. The CNC lathe DMG CTX 310 Ecoline and tungsten of 99.7 % purity were used during the experiments. Only the wedge of whisker ceramics has proved to be sufficiently suitable and only for relatively low cutting speeds.

Effects of dual task on turning ability in stroke survivors and older adults.

Science.gov (United States)

Hollands, K L; Agnihotri, D; Tyson, S F

2014-09-01

Turning is an integral component of independent mobility in which stroke survivors frequently fall. This study sought to measure the effects of competing cognitive demands on the stepping patterns of stroke survivors, compared to healthy age-match adults, during turning as a putative mechanism for falls. Walking and turning (90°) was assessed under single (walking and turning alone) and dual task (subtracting serial 3s while walking and turning) conditions using an electronic, pressure-sensitive walkway. Dependent measures were time to turn, variability in time to turn, step length, step width and single support time during three steps of the turn. Turning ability in single and dual task conditions was compared between stroke survivors (n=17, mean ± SD: 59 ± 113 months post-stroke, 64 ± 10 years of age) and age-matched healthy counterparts (n=15). Both groups took longer, were more variable, tended to widen the second step and, crucially, increased single support time on the inside leg of the turn while turning and distracted. Increased single support time during turning may represent biomechanical mechanism, within stepping patterns of turning under distraction, for increased risk of falls for both stroke survivors and older adults. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

Hydrodynamics of Turning Flocks

OpenAIRE

Yang, Xingbo; Marchetti, M. Cristina

2014-01-01

We present a hydrodynamic model of flocking that generalizes the familiar Toner-Tu equations to incorporate turning inertia of well-polarized flocks. The continuum equations controlled by only two dimensionless parameters, orientational inertia and alignment strength, are derived by coarse graining the inertial spin model recently proposed by Cavagna et al. The interplay between orientational inertia and bend elasticity of the flock yields anisotropic spin waves that mediate the propagation o...

OpenTURNS, an open source uncertainty engineering software

International Nuclear Information System (INIS)

Popelin, A.L.; Dufoy, A.

2013-01-01

The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

A Postneoliberal Turn? Variants of the Recent Penal Policy in Argentina

Directory of Open Access Journals (Sweden)

Maximo Sozzo

2017-03-01

Full Text Available This paper analysed the connection between the emergence and consolidation of a postneoliberal political program and alliance – Kirchnerism – and penal policies in Argentina. Three key moments are identified in this recent period. After the experience of an intense punitive turn during the 1990s and early 2000s, Kirchnerist political alliances tried to deploy a progressive political discourse and agenda on penal issues. Nevertheless, this initially coincided with a strong wave of penal populism ‘from below’ that continued the precedent trend towards increasing punitiviness.  Since 2005, and for a brief moment, this tendency stopped. However, after that and during the presidencies of Fernandez de Kirchner a more volatile and contradictory scenario was generated. The incarceration rate between 2002 and 2014 in Argentina grew substantially as did the rate of convictions. Meanwhile the percentage of suspended sentences as part of the total convictions and the percentage of custodial sanctions both fell. Especially in relation to incarceration, these levels of change are not as stark as those of the preceding decades. However, the trends persist. Therefore, the question of how to transcend the dynamics of the punitive turn remains a pending and urgent political subject. The article argues the importance of analysing why a punitive turn is interrupted and presents an explanation of it.

A prospective observational study of ICU patient position and frequency of turning.

Science.gov (United States)

Goldhill, D R; Badacsonyi, A; Goldhill, A A; Waldmann, C

2008-05-01

Positioning and turning critically ill patients may be beneficial but there are little data on current practice. We prospectively recorded patient position every hour over two separate days in 40 British intensive care units and analysed 393 sets of observation. Five patients were prone at any time and 3.8% (day 1) and 5% (day 2) were on rotating beds. Patients were on their back for 46.1% of observations, turned left for 28.4% and right for 25.5%, and head up for 97.4%. A turn was defined as a change between on back, turned left or turned right. The average time (SD) between turns was 4.85 (3.3) h. There was no significant association between the average time between turns and age, weight, height, gender, respiratory diagnosis, intubated and ventilated, sedation score, day of week or nurse:patient ratio. There was a significant difference between hospitals in the frequency with which patients were turned.

Using support vector machine to predict beta- and gamma-turns in proteins.

Science.gov (United States)

Hu, Xiuzhen; Li, Qianzhong

2008-09-01

By using the composite vector with increment of diversity, position conservation scoring function, and predictive secondary structures to express the information of sequence, a support vector machine (SVM) algorithm for predicting beta- and gamma-turns in the proteins is proposed. The 426 and 320 nonhomologous protein chains described by Guruprasad and Rajkumar (Guruprasad and Rajkumar J. Biosci 2000, 25,143) are used for training and testing the predictive model of the beta- and gamma-turns, respectively. The overall prediction accuracy and the Matthews correlation coefficient in 7-fold cross-validation are 79.8% and 0.47, respectively, for the beta-turns. The overall prediction accuracy in 5-fold cross-validation is 61.0% for the gamma-turns. These results are significantly higher than the other algorithms in the prediction of beta- and gamma-turns using the same datasets. In addition, the 547 and 823 nonhomologous protein chains described by Fuchs and Alix (Fuchs and Alix Proteins: Struct Funct Bioinform 2005, 59, 828) are used for training and testing the predictive model of the beta- and gamma-turns, and better results are obtained. This algorithm may be helpful to improve the performance of protein turns' prediction. To ensure the ability of the SVM method to correctly classify beta-turn and non-beta-turn (gamma-turn and non-gamma-turn), the receiver operating characteristic threshold independent measure curves are provided. (c) 2008 Wiley Periodicals, Inc.

Pigeons produce aerodynamic torques through changes in wing trajectory during low speed aerial turns.

Science.gov (United States)

Ros, Ivo G; Badger, Marc A; Pierson, Alyssa N; Bassman, Lori C; Biewener, Andrew A

2015-02-01

The complexity of low speed maneuvering flight is apparent from the combination of two critical aspects of this behavior: high power and precise control. To understand how such control is achieved, we examined the underlying kinematics and resulting aerodynamic mechanisms of low speed turning flight in the pigeon (Columba livia). Three birds were trained to perform 90 deg level turns in a stereotypical fashion and detailed three-dimensional (3D) kinematics were recorded at high speeds. Applying the angular momentum principle, we used mechanical modeling based on time-varying 3D inertia properties of individual sections of the pigeon's body to separate angular accelerations of the torso based on aerodynamics from those based on inertial effects. Directly measured angular accelerations of the torso were predicted by aerodynamic torques, justifying inferences of aerodynamic torque generation based on inside wing versus outside wing kinematics. Surprisingly, contralateral asymmetries in wing speed did not appear to underlie the 90 deg aerial turns, nor did contralateral differences in wing area, angle of attack, wingbeat amplitude or timing. Instead, torso angular accelerations into the turn were associated with the outside wing sweeping more anteriorly compared with a more laterally directed inside wing. In addition to moving through a relatively more retracted path, the inside wing was also more strongly pronated about its long axis compared with the outside wing, offsetting any difference in aerodynamic angle of attack that might arise from the observed asymmetry in wing trajectories. Therefore, to generate roll and pitch torques into the turn, pigeons simply reorient their wing trajectories toward the desired flight direction. As a result, by acting above the center of mass, the net aerodynamic force produced by the wings is directed inward, generating the necessary torques for turning. © 2015. Published by The Company of Biologists Ltd.

pi-Turns: types, systematics and the context of their occurrence in protein structures.

Science.gov (United States)

Dasgupta, Bhaskar; Chakrabarti, Pinak

2008-09-22

For a proper understanding of protein structure and folding it is important to know if a polypeptide segment adopts a conformation inherent in the sequence or it depends on the context of its flanking secondary structures. Turns of various lengths have been studied and characterized starting from three-residue gamma-turn to six-residue pi-turn. The Schellman motif occurring at the C-terminal end of alpha-helices is a classical example of hydrogen bonded pi-turn involving residues at (i) and (i+5) positions. Hydrogen bonded and non-hydrogen bonded beta- and alpha-turns have been identified previously; likewise, a systematic characterization of pi-turns would provide valuable insight into turn structures. An analysis of protein structures indicates that at least 20% of pi-turns occur independent of the Schellman motif. The two categories of pi-turns, designated as pi-HB and SCH, have been further classified on the basis of backbone conformation and both have AAAa as the major class. They differ in the residue usage at position (i+1), the former having a large preference for Pro that is absent in the latter. As in the case of shorter length beta- and alpha-turns, pi-turns have also been identified not only on the basis of the existence of hydrogen bond, but also using the distance between terminal C alpha-atoms, and this resulted in a comparable number of non-hydrogen-bonded pi-turns (pi-NHB). The presence of shorter beta- and alpha-turns within all categories of pi-turns, the subtle variations in backbone torsion angles along the turn residues, the location of the turns in the context of tertiary structures have been studied. pi-turns have been characterized, first using hydrogen bond and the distance between C alpha atoms of the terminal residues, and then using backbone torsion angles. While the Schellman motif has a structural role in helix termination, many of the pi-HB turns, being located on surface cavities, have functional role and there is also sequence

Topological side-chain classification of beta-turns: ideal motifs for peptidomimetic development.

Science.gov (United States)

Tran, Tran Trung; McKie, Jim; Meutermans, Wim D F; Bourne, Gregory T; Andrews, Peter R; Smythe, Mark L

2005-08-01

Beta-turns are important topological motifs for biological recognition of proteins and peptides. Organic molecules that sample the side chain positions of beta-turns have shown broad binding capacity to multiple different receptors, for example benzodiazepines. Beta-turns have traditionally been classified into various types based on the backbone dihedral angles (phi2, psi2, phi3 and psi3). Indeed, 57-68% of beta-turns are currently classified into 8 different backbone families (Type I, Type II, Type I', Type II', Type VIII, Type VIa1, Type VIa2 and Type VIb and Type IV which represents unclassified beta-turns). Although this classification of beta-turns has been useful, the resulting beta-turn types are not ideal for the design of beta-turn mimetics as they do not reflect topological features of the recognition elements, the side chains. To overcome this, we have extracted beta-turns from a data set of non-homologous and high-resolution protein crystal structures. The side chain positions, as defined by C(alpha)-C(beta) vectors, of these turns have been clustered using the kth nearest neighbor clustering and filtered nearest centroid sorting algorithms. Nine clusters were obtained that cluster 90% of the data, and the average intra-cluster RMSD of the four C(alpha)-C(beta) vectors is 0.36. The nine clusters therefore represent the topology of the side chain scaffold architecture of the vast majority of beta-turns. The mean structures of the nine clusters are useful for the development of beta-turn mimetics and as biological descriptors for focusing combinatorial chemistry towards biologically relevant topological space.

A Polygon and Point-Based Approach to Matching Geospatial Features

Directory of Open Access Journals (Sweden)

Juan J. Ruiz-Lendínez

2017-12-01

Full Text Available A methodology for matching bidimensional entities is presented in this paper. The matching is proposed for both area and point features extracted from geographical databases. The procedure used to obtain homologous entities is achieved in a two-step process: The first matching, polygon to polygon matching (inter-element matching, is obtained by means of a genetic algorithm that allows the classifying of area features from two geographical databases. After this, we apply a point to point matching (intra-element matching based on the comparison of changes in their turning functions. This study shows that genetic algorithms are suitable for matching polygon features even if these features are quite different. Our results show up to 40% of matched polygons with differences in geometrical attributes. With regards to point matching, the vertex from homologous polygons, the function and threshold values proposed in this paper show a useful method for obtaining precise vertex matching.

Analytical and numerical construction of vertical periodic orbits about triangular libration points based on polynomial expansion relations among directions

Science.gov (United States)

Qian, Ying-Jing; Yang, Xiao-Dong; Zhai, Guan-Qiao; Zhang, Wei

2017-08-01

Innovated by the nonlinear modes concept in the vibrational dynamics, the vertical periodic orbits around the triangular libration points are revisited for the Circular Restricted Three-body Problem. The ζ -component motion is treated as the dominant motion and the ξ and η -component motions are treated as the slave motions. The slave motions are in nature related to the dominant motion through the approximate nonlinear polynomial expansions with respect to the ζ -position and ζ -velocity during the one of the periodic orbital motions. By employing the relations among the three directions, the three-dimensional system can be transferred into one-dimensional problem. Then the approximate three-dimensional vertical periodic solution can be analytically obtained by solving the dominant motion only on ζ -direction. To demonstrate the effectiveness of the proposed method, an accuracy study was carried out to validate the polynomial expansion (PE) method. As one of the applications, the invariant nonlinear relations in polynomial expansion form are used as constraints to obtain numerical solutions by differential correction. The nonlinear relations among the directions provide an alternative point of view to explore the overall dynamics of periodic orbits around libration points with general rules.

Two Methods for Turning and Positioning and the Effect on Pressure Ulcer Development: A Comparison Cohort Study.

Science.gov (United States)

Powers, Jan

2016-01-01

We evaluated 2 methods for patient positioning on the development of pressure ulcers; specifically, standard of care (SOC) using pillows versus a patient positioning system (PPS). The study also compared turning effectiveness as well as nursing resources related to patient positioning and nursing injuries. A nonrandomized comparison design was used for the study. Sixty patients from a trauma/neurointensive care unit were included in the study. Patients were randomly assigned to 1 of 2 teams per standard bed placement practices at the institution. Patients were identified for enrollment in the study if they were immobile and mechanically ventilated with anticipation of 3 days or more on mechanical ventilation. Patients were excluded if they had a preexisting pressure ulcer. Patients were evaluated daily for the presence of pressure ulcers. Data were collected on the number of personnel required to turn patients. Once completed, the angle of the turn was measured. The occupational health database was reviewed to determine nurse injuries. The final sample size was 59 (SOC = 29; PPS = 30); there were no statistical differences between groups for age (P = .10), body mass index (P = .65), gender (P = .43), Braden Scale score (P = .46), or mobility score (P = .10). There was a statistically significant difference in the number of hospital-acquired pressure ulcers between turning methods (6 in the SOC group vs 1 in the PPS group; P = .042). The number of nurses needed for the SOC method was significantly higher than the PPS (P ≤ 0.001). The average turn angle achieved using the PPS was 31.03°, while the average turn angle achieved using SOC was 22.39°. The difference in turn angle from initial turn to 1 hour after turning in the SOC group was statistically significant (P patients to prevent development of pressure ulcers.

Head turning as a prominent motor symptom in status epilepticus.

Science.gov (United States)

Bauer, Gerhard; Broessner, Gregor; Unterberger, Iris; Walser, Gerald; Pfausler, Bettina; Trinka, Eugen

2008-06-01

Head and eye turning is frequently observed during seizures. Versions with tonic and/or clonic symptoms can be differentiated from smooth head deviations. Head turning as a prominent symptom of status epilepticus has not previously been reported. We present eight case reports, (7 women/1 man, mean age 41 years, median 41.5, range 10 to 74), of status epilepticus (SE), with head turning as a prominent motor symptom. Six were accompanied by continuous frontal, occipital and temporal ictal epileptiform discharges. Furthermore, two patients had absence status with rhythmic and clonic head versions. While the localizing significance of head turnings in SE is low, in our cases, the direction was away from the discharging hemisphere in all cases of focal SE regardless of whether the turning was classified as version (three cases) or deviation (three cases). In this small series of SE, the classical observation of a patient looking away from the discharging hemisphere is still valid.

Turn Management or Impression Management?

NARCIS (Netherlands)

ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

2009-01-01

We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

Professional Employees Turn to Unions

Science.gov (United States)

Chamot, Dennis

1976-01-01

White-collar and professional employees are increasingly turning to unions to combat their loss of independence as employees of large organizations. Managers should realize that they and professional employees have different viewpoints about job situations and that the current trend toward white-collar unionism is apt to continue. (JG)

A Cognitive Analysis of Truck Drivers’ Right-hand Turns

DEFF Research Database (Denmark)

Sieker, Tobias Grønborg; G. Skulason, Thorgeir; Sletting, Kristian

2015-01-01

This paper presents an investigation of truck drivers’ performance during right-hand turns performed in intersections with traffic lights in order to elicit the truck drivers’ domain, decision-making processes, and the strategies used while executing the turn. To gain knowledge about this, a truc...

Won-Buddhism and a Great Turning in Civilization: The Role of Religion

Directory of Open Access Journals (Sweden)

Paik Nak-chung

2017-03-01

Full Text Available Addressing the theme of a great turning in civilization, this essay focuses on the Korean religion Won-Buddhism with its founding motto, “With this Great Opening of matter, let there be a Great Opening of spirit.” Both its doctrine and practice arguably possess great potential. Unlike the traditional Buddhist view of enlightenment, Won-Buddhism’s “Great Opening of spirit” starts from a specific diagnosis of the current time as an age of “Great Opening of matter” and proposes a double project of at once adapting to and overcoming modernity. In this way, it carries on the tradition of Korea’s indigenous religious movements since the mid-nineteenth century, but by combining that strain with Buddhism as its core doctrine, it achieves a fuller global significance than its predecessors. The essay examines Roberto Unger’s The Religion of the Future for both parallels and divergences, sympathizing with Unger’s emphasis on a religious revolution, but finding his thought essentially confined within the limits of Western metaphysics. Martin Heidegger is brought in to elucidate this point, as is Karl Marx, for comparison and contrast with Won-Buddhism’s diagnosis of and response to modernity. In closing, the essay takes up two Won-Buddhist agendas that are also of global concern: gender equality and the “church and state” relation.

Evolutionary diversity and turn-over of sex determination in teleost fishes.

Science.gov (United States)

Mank, J E; Avise, J C

2009-01-01

Sex determination, due to the obvious association with reproduction and Darwinian fitness, has been traditionally assumed to be a relatively conserved trait. However, research on teleost fishes has shown that this need not be the case, as these animals display a remarkable diversity in the ways that they determine sex. These different mechanisms, which include constitutive genetic mechanisms on sex chromosomes, polygenic constitutive mechanisms, environmental influences, hermaphroditism, and unisexuality have each originated numerous independent times in the teleosts. The evolutionary lability of sex determination, and the corresponding rapid rate of turn-over among different modes, makes the teleost clade an excellent model with which to test theories regarding the evolution of sex determining adaptations. Much of the plasticity in sex determination likely results from the dynamic teleost genome, and recent advances in fish genetics and genomics have revealed the role of gene and genome duplication in fostering emergence and turn-over of sex determining mechanisms. 2009 S. Karger AG, Basel.

Assessing lexical, syntactic, and conceptual turn-by-turn alignment in conversations involving conflict and deception

DEFF Research Database (Denmark)

Duran, Nicholas; Fusaroli, Riccardo; Paxton, Alexandra

2015-01-01

-based NLP tools, the procedure begins by taking conversational partners' turns and converting each into a lemmatized sequence of words, assigning part-of-speech tags and computing high-dimensional semantic vectors per each utterance. Words and part-of-speech tags are further sequenced into n-g! rams...

Turn me on! Using the “Internet of Things” to turn things on and off

CSIR Research Space (South Africa)

Butgereit, L

2011-10-01

Full Text Available to the Internet. There are many examples of things posting their status on Twitter and allowing uni-directional access. TurnMeOn is an example of allowing bidirectional access between people and things using Internet protocols. Users can query the status of a...

Semiautomatic machine for turning inside out industrial leather gloves

International Nuclear Information System (INIS)

Aragón-Gonzalez, G; Cano-Blanco, M; León-Galicia, A; Medrano-Sierra, L F; Morales-Gómez, J R

2015-01-01

The last step in the industrial leather gloves manufacturing is to turn the inside out so that the sewing be in the inside of the glove. This work presents the design and testing of a machine for that purpose. In order to quantify the relevant variables, testing was performed with a prototype glove. The employed devices and the testing proceeding were developed experimentally. The obtained information was used to build the turning inside out machine. This machine works with pneumatic power to carry the inside out turning by means of double effect lineal actuators. It has two independent work stations that could be operated simultaneously by two persons, one in each station or in single mode operating one station by one person. The turning inside out cycle is started by means of directional control valves operated with pedals. The velocity and developed force by the actuators is controlled with typical pneumatic resources. The geometrical dimensions of the machine are: 1.15 m length; 0.71 m width and 2.15 m high. Its approximated weight is 120 kg. The air consumption is 5.4 fps by each working station with 60 psig work pressure. The turning inside out operation is 40 s for each industrial leather glove

On the correlation between hydrogen bonding and melting points in the inositols

DEFF Research Database (Denmark)

Bekö, Sándor L; Alig, Edith; Schmidt, Martin U

2014-01-01

Inositol, 1,2,3,4,5,6-hexahydroxycyclohexane, exists in nine stereoisomers with different crystal structures and melting points. In a previous paper on the relationship between the melting points of the inositols and the hydrogen-bonding patterns in their crystal structures [Simperler et al. (2006...... ▶). CrystEngComm 8, 589], it was noted that although all inositol crystal structures known at that time contained 12 hydrogen bonds per molecule, their melting points span a large range of about 170 °C. Our preliminary investigations suggested that the highest melting point must be corrected for the effect...... ordered phases could be determined, of which seven were obtained from laboratory X-ray powder diffraction data. Five additional phases turned out to be rotator phases and only their unit cells could be determined. Two previously unknown melting points were measured, as well as most enthalpies of melting...

Family matters: Directionality of turning bias while kissing is modulated by context.

Science.gov (United States)

Sedgewick, Jennifer R; Elias, Lorin J

2016-01-28

When leaning forward to kiss to a romantic partner, individuals tend to direct their kiss to the right more often than the left. Studies have consistently demonstrated this kissing asymmetry, although other factors known to influence lateral biases, such as sex or situational context, had yet to be explored. The primary purpose of our study was to investigate if turning direction was consistent between a romantic (parent-parent) and parental (parent-child) kissing context, and secondly, to examine if sex differences influenced turning bias between parent-child kissing partners. An archival analysis coded the direction of turning bias for 161 images of romantic kissing (mothers kissing fathers) and 529 images of parental kissing (mothers or fathers kissing sons or daughters). The results indicated that the direction of turning bias differed between kissing contexts. As expected, a right-turn bias was observed for romantic kissing; however, a left-turn bias was exhibited for parental kissing. There was no significant difference of turning bias between any parent-child kissing partners. Interpretations for the left-turn bias discuss parental kissing as a learned lateral behaviour.

Turning to account the implicit side effects of hydroelectric projects implying reservoirs

International Nuclear Information System (INIS)

Ionescu, S.

1996-01-01

Operation of the hydroelectric projects including relatively important water reservoirs provides implicitly side effects favorable to water management (increase of minimum provided flows, flood routing, etc) and to related fields (additional facilities for water supply, extension of the public utility networks as: road, telecommunication, electric lines, favoring the tourism and recreative activities). The paper suggests methodologies for economic and financial assessment of these effects, the turning to account of which, may increase the efficiency of the hydroelectric development and may stimulate the interest for new investments in the field.(author). 3 figs., 5 refs

Cutting forces during turning with variable depth of cut

Directory of Open Access Journals (Sweden)

M. Sadílek

2016-03-01

The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

An expert machine tools selection system for turning operation

NARCIS (Netherlands)

Tan, C.F.; Khalil, S.N.; Karjanto, J.; Wahidin, L.S.; Chen, W.; Rauterberg, G.W.M.

2015-01-01

The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to

Why Does Hair Turn Gray?

Science.gov (United States)

... out, but people with naturally lighter hair are just as likely to go gray. From the time a person notices a few gray hairs, it may take more than 10 years for all of that person's hair to turn ... really believe that this happens. Just in case, try not to freak out your ...

Accurate Anharmonic Zero-Point Energies for Some Combustion-Related Species from Diffusion Monte Carlo.

Science.gov (United States)

Harding, Lawrence B; Georgievskii, Yuri; Klippenstein, Stephen J

2017-06-08

Full-dimensional analytic potential energy surfaces based on CCSD(T)/cc-pVTZ calculations have been determined for 48 small combustion-related molecules. The analytic surfaces have been used in Diffusion Monte Carlo calculations of the anharmonic zero-point energies. The resulting anharmonicity corrections are compared to vibrational perturbation theory results based both on the same level of electronic structure theory and on lower-level electronic structure methods (B3LYP and MP2).

Make your point! debate for ESL/EFL students

CERN Document Server

Lubetsky, Michael H

2014-01-01

This valuable workbook and downloadable audio can turn any ESL student into an accomplished debater!Make Your Point! opens the world of formal debate to the English learner. Debate fundamentals are taught form the first chapter in a student-centered format suitable for large and small classes alike.Each of the ten chapters offers a ""language focus"" and a ""debatable focus."" As students learn new debate skills, they also build important language skills. All task chains integrate speaking, listening, reading and writing activities. Most activities are intended for pairs and small groups.

Prediction of beta-turns and beta-turn types by a novel bidirectional Elman-type recurrent neural network with multiple output layers (MOLEBRNN).

Science.gov (United States)

Kirschner, Andreas; Frishman, Dmitrij

2008-10-01

Prediction of beta-turns from amino acid sequences has long been recognized as an important problem in structural bioinformatics due to their frequent occurrence as well as their structural and functional significance. Because various structural features of proteins are intercorrelated, secondary structure information has been often employed as an additional input for machine learning algorithms while predicting beta-turns. Here we present a novel bidirectional Elman-type recurrent neural network with multiple output layers (MOLEBRNN) capable of predicting multiple mutually dependent structural motifs and demonstrate its efficiency in recognizing three aspects of protein structure: beta-turns, beta-turn types, and secondary structure. The advantage of our method compared to other predictors is that it does not require any external input except for sequence profiles because interdependencies between different structural features are taken into account implicitly during the learning process. In a sevenfold cross-validation experiment on a standard test dataset our method exhibits the total prediction accuracy of 77.9% and the Mathew's Correlation Coefficient of 0.45, the highest performance reported so far. It also outperforms other known methods in delineating individual turn types. We demonstrate how simultaneous prediction of multiple targets influences prediction performance on single targets. The MOLEBRNN presented here is a generic method applicable in a variety of research fields where multiple mutually depending target classes need to be predicted. http://webclu.bio.wzw.tum.de/predator-web/.

Hinkley Point 'C' power station public inquiry: proof of evidence on local site related issues

International Nuclear Information System (INIS)

Gammon, K.M.

1988-09-01

A public inquiry has been set up to examine the planning application made by the Central Electricity Generating Board (CEGB) for the construction of a 1200 MW Pressurized Water Reactor power station at Hinkley Point (Hinkley Point ''C'') in the United Kingdom, adjacent to an existing nuclear power station. The CEGB evidence to the Inquiry on local site related issues begins by setting the proposed development within the context of local authority planning policies for the area. The implications of the development in terms of overall land needs, construction, access, buildings and works both temporary and permanent, are described. Environmental impacts, aesthetic and socio-economic factors are considered including possible effects on agriculture, nature conservation, water supply, transport and employment. (UK)

On-line diagnosis of inter-turn short circuit fault for DC brushed motor.

Science.gov (United States)

Zhang, Jiayuan; Zhan, Wei; Ehsani, Mehrdad

2018-06-01

Extensive research effort has been made in fault diagnosis of motors and related components such as winding and ball bearing. In this paper, a new concept of inter-turn short circuit fault for DC brushed motors is proposed to include the short circuit ratio and short circuit resistance. A first-principle model is derived for motors with inter-turn short circuit fault. A statistical model based on Hidden Markov Model is developed for fault diagnosis purpose. This new method not only allows detection of motor winding short circuit fault, it can also provide estimation of the fault severity, as indicated by estimation of the short circuit ratio and the short circuit resistance. The estimated fault severity can be used for making appropriate decisions in response to the fault condition. The feasibility of the proposed methodology is studied for inter-turn short circuit of DC brushed motors using simulation in MATLAB/Simulink environment. In addition, it is shown that the proposed methodology is reliable with the presence of small random noise in the system parameters and measurement. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Expanding the peptide beta-turn in alphagamma hybrid sequences: 12 atom hydrogen bonded helical and hairpin turns.

Science.gov (United States)

Chatterjee, Sunanda; Vasudev, Prema G; Raghothama, Srinivasarao; Ramakrishnan, Chandrasekharan; Shamala, Narayanaswamy; Balaram, Padmanabhan

2009-04-29

Hybrid peptide segments containing contiguous alpha and gamma amino acid residues can form C(12) hydrogen bonded turns which may be considered as backbone expanded analogues of C(10) (beta-turns) found in alphaalpha segments. Exploration of the regular hydrogen bonded conformations accessible for hybrid alphagamma sequences is facilitated by the use of a stereochemically constrained gamma amino acid residue gabapentin (1-aminomethylcyclohexaneacetic acid, Gpn), in which the two torsion angles about C(gamma)-C(beta) (theta(1)) and C(beta)-C(alpha) (theta(2)) are predominantly restricted to gauche conformations. The crystal structures of the octapeptides Boc-Gpn-Aib-Gpn-Aib-Gpn-Aib-Gpn-Aib-OMe (1) and Boc-Leu-Phe-Val-Aib-Gpn-Leu-Phe-Val-OMe (2) reveal two distinct conformations for the Aib-Gpn segment. Peptide 1 forms a continuous helix over the Aib(2)-Aib(6) segment, while the peptide 2 forms a beta-hairpin structure stabilized by four cross-strand hydrogen bonds with the Aib-Gpn segment forming a nonhelical C(12) turn. The robustness of the helix in peptide 1 in solution is demonstrated by NMR methods. Peptide 2 is conformationally fragile in solution with evidence of beta-hairpin conformations being obtained in methanol. Theoretical calculations permit delineation of the various C(12) hydrogen bonded structures which are energetically feasible in alphagamma and gammaalpha sequences.

Children’s Negative Emotions and Ego-Resiliency: Longitudinal Relations With Social Competence

OpenAIRE

Taylor, Zoe E.; Eisenberg, Nancy; VanSchyndel, Sarah K.; Eggum-Wilkens, Natalie D.; Spinrad, Tracy L.

2013-01-01

We examined the relations of negative emotions in toddlerhood to the development of ego-resiliency and social competence across early childhood. Specifically, we addressed whether fear and anger/frustration in 30-month-old children (N = 213) was associated with the development of ego-resiliency across 4 time points (42 to 84 months), and, in turn, whether ego-resiliency predicted social competence at 84 months. Child anger/frustration negatively predicted the intercept of ego-resiliency at 42...

Savage Solitude: The Problematisation of Disability at the Turn of the Eighteenth Century

Science.gov (United States)

Verstraete, Pieter

2009-01-01

In this article an old question with relation to disability history is dragged up and looked at from a rather new perspective. By referring to Foucault's notion of problematisation a new insight is presented into the way in which disability at the turn of the eighteenth century became a problem for contemporary politics and how a particular kind…

Effect of stern hull shape on turning circle of ships

Science.gov (United States)

Jaswar, Maimun, A.; Wahid, M. A.; Priyanto, A.; Zamani, Pauzi, Saman

2012-06-01

Many factors such as: stern hull shape, length, draught, trim, propulsion system and external forces affecting the drift angle influence rate of turn and size of turning circle of ships. This paper discusses turning circle characteristics of U and V stern hull shape of Very Large Crude Oil Carrier (VLCC) ships. The ships have same principal dimension such as length, beam, and draught. The turning circle characteristics of the VLCC ships are simulated at 35 degree of rudder angle. In the analysis, firstly, turning circle performance of U-type VLCC ship is simulated. In the simulation, initial ship speed is determined using given power and rpm. Hydrodynamic derivatives coefficients are determined by including effect of fullness of aft run. Using the obtained, speed and hydrodynamic coefficients, force and moment acting on hull, force and moment induced by propeller, force and moment induced by rudder are determined. Finally, ship trajectory, ratio of speed, yaw angle and drift angle are determined. Results of simulation results of the VLCC ship are compared with the experimental one as validation. Using the same method, V-type VLCC is simulated and the simulation results are compared with U-type VLCC ship. Results shows the turning circle of U-type is larger than V-type due to effect stern hul results of simulation are.

Measurement of signal use and vehicle turns as indication of driver cognition.

Science.gov (United States)

Wallace, Bruce; Goubran, Rafik; Knoefel, Frank

2014-01-01

This paper uses data analytics to provide a method for the measurement of a key driving task, turn signal usage as a measure of an automatic over-learned cognitive function drivers. The paper augments previously reported more complex executive function cognition measures by proposing an algorithm that analyzes dashboard video to detect turn indicator use with 100% accuracy without any false positives. The paper proposes two algorithms that determine the actual turns made on a trip. The first through analysis of GPS location traces for the vehicle, locating 73% of the turns made with a very low false positive rate of 3%. A second algorithm uses GIS tools to retroactively create turn by turn directions. Fusion of GIS and GPS information raises performance to 77%. The paper presents the algorithm required to measure signal use for actual turns by realigning the 0.2Hz GPS data, 30fps video and GIS turn events. The result is a measure that can be tracked over time and changes in the driver's performance can result in alerts to the driver, caregivers or clinicians as indication of cognitive change. A lack of decline can also be shared as reassurance.

The Idea of Modernity in Italian Literature at the Turn of the 19th and 20th Centuries

Directory of Open Access Journals (Sweden)

Anastasia V. Golubtsova

2016-09-01

Full Text Available The article analyzes various concepts of modernity in Italian literature at the turn of the 19th and 20th centuries. Modernity is considered a key category of the literary process of the period: different views of modernity reveal philosophical, historical, and aesthetic ideas of the major authors and literary currents. The term modernity in its relation to Italy at the turn of the 19th and 20th centuries may be understood in two different ways: as a specific time period after the unification of Italy and as an aesthetic ideal, both reachable and unreachable. Modernity as a historical period is inseparable from the sense of disappointment and awareness of Italian backwardness and provincialism. The Scapigliati manifest their socio-critical position as a Romantic conflict between individual and society, Verism represents the same idea as a tragic clash of traditional peasant world and modernity that is destroying it. Luigi Pirandello belongs to the same socio-critical tradition. The sense of weariness and decadence is one of the aspects of modern worldview: Gabriele D’Annunzio expresses it in the form of decadent aestheticism; the Crepusculars reject modernity and replace it with the idea of everyday life; Luigi Pirandello puts a special emphasis on the state of perplexity and confusion experienced by a modern man. From the aesthetic point of view, modernity in Italy begins as a struggle against Romanticism; however, here we encounter the controversial nature of the concept again. Giosue Carducci and the Scapigliati reject Italian Romanticism but turn to European Romanticism trying to overcome Italian cultural backwardness. A Verist writer Luigi Capuana elaborates a positivist ideal of modern literature and yet abandons it later. D’Annunzio sees the ideal of modern art in restoring cultural continuity. Futurists, on the contrary, understand modernity as breaking with tradition. Thus, all aesthetic interpretations of modernity in Italy focus

Analysis of the lateral push-off in the freestyle flip turn.

Science.gov (United States)

Araujo, Luciana; Pereira, Suzana; Gatti, Roberta; Freitas, Elinai; Jacomel, Gabriel; Roesler, Helio; Villas-Boas, Joao

2010-09-01

The aim of this study was to examine the contact phase during the lateral push-off in the turn of front crawl swimming to determine which biomechanical variables (maximum normalized peak force, contact time, impulse, angle of knee flexion, and total turn time within 15 m) contribute to the performance of this turn technique. Thirty-four swimmers of state, national, and international competitive standard participated in the study. For data collection, the following equipment was used: an underwater force platform, a 30-Hz VHS video camera, and a MiniDv digital camera within an underwater box. Data are expressed as descriptive statistics. Inferential analyses were performed using Pearson's correlation and multiple linear regressions. All variables studied had a significant relationship with turn performance. We conclude that a turn executed with a knee flexion angle of between 100° and 120° provides optimum peak forces to generate impulses that allow the swimmer to lose less time in the turn without the need for an excessive force application and with less energy lost.

Effects of Hypericum perforatum on turning behavior in an animal model of Parkinson's disease

Directory of Open Access Journals (Sweden)

Débora Dalla Vecchia

2015-03-01

Full Text Available Parkinson's disease (PD is an age-related neurodegenerative disorder characterized by the slow and progressive death of dopaminergic neurons in the (substantia nigra pars compact. Hypericum perforatum (H. perforatum is a plant widely used as an antidepressant, that also presents antioxidant and anti-inflammatory properties. We evaluated the effects of H. perforatum on the turning behavior of rats submitted to a unilateral administration of 6-hydroxydopamine (6-OHDA into the medial forebrain bundle as an animal model of PD. The animals were treated with H. perforatum (100, 200, or 400 mg/kg, v.o. for 35 consecutive days (from the 28th day before surgery to the 7th day after. The turning behavior was evaluated at 7, 14 and 21 days after the surgery, and the turnings were counted as contralateral or ipsilateral to the lesion side. All tested doses significantly reduced the number of contralateral turns in all days of evaluation, suggesting a neuroprotective effect. However, they were not able to prevent the 6-OHDA-induced decrease of tyrosine hydroxylase expression in the lesioned striatum. We propose that H. perforatum may counteract the overexpression of dopamine receptors on the lesioned striatum as a possible mechanism for this effect. The present findings provide new evidence that H. perforatum may represent a promising therapeutic tool for PD.

A novel method for calculating the energy cost of turning during running

Directory of Open Access Journals (Sweden)

Hatamoto Y

2013-05-01

Full Text Available Yoichi Hatamoto,1 Yosuke Yamada,2 Tatsuya Fujii,3 Yasuki Higaki,3 Akira Kiyonaga,3 Hiroaki Tanaka31Graduate School of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, Japan; 2The Fukuoka University Institute for Physical Activity, Nanakuma Jonan-ku Fukuoka, Japan; 3Faculty of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, JapanAbstract: Although changes of direction are one of the essential locomotor patterns in ball sports, the physiological demand of turning during running has not been previously investigated. We proposed a novel approach by which to evaluate the physiological demand of turning. The purposes of this study were to establish a method of measuring the energy expenditure (EE of a 180° turn during running and to investigate the effect of two different running speeds on the EE of a 180° turn. Eleven young, male participants performed measurement sessions at two different running speeds (4.3 and 5.4 km/hour. Each measurement session consisted of five trials, and each trial had a different frequency of turns. At both running speeds, as the turn frequency increased the gross oxygen consumption (V · O2 also increased linearly (4.3 km/hour, r = 0.973; 5.4 km/hour, r = 0.996. The V · O2 of a turn at 5.4 km/hour (0.55 [SD 0.09] mL/kg was higher than at 4.3 km/hour (0.34 [SD 0.13] mL/kg (P < 0.001. We conclude that the gross V · O2 of running at a fixed speed with turns is proportional to turn frequency and that the EE of a turn is different at different running speeds. The Different Frequency Accumulation Method is a useful tool for assessing the physiological demands of complex locomotor activity.Keywords: energy expenditure, turning, turn frequency, running speed, V · O2, heart rate

Now, It's Your Turn: How You Can Take Medicine Safely

Science.gov (United States)

... turn Javascript on. Feature: Taking Medicines Safely Now, It's Your Turn: How You Can Take Medicine Safely ... medicine. The pharmacist has filled the prescription. Now it's up to you to take the medicine safely. ...

Measuring the relative efficiencies of automated telling machines and point of sales

Directory of Open Access Journals (Sweden)

Sara Farajzadeh

2015-11-01

Full Text Available During the past few years, many people have been interested in purchasing goods and services via point of sales (POS. They have also wished to pay their bills, withdraw cash or transfer funds using automated telling machines (ATMs. These two facilities help banks’ customers carry less amount of cash and do their daily banking activities any time even when the banks are closed. This paper presents an empirical investigation to measure the relative efficiency of nearly 600 POS and ATM units associated with Bank Melli Iran located in city of Tehran, Iran. Using data envelopment analysis, the study has disclosed that only small portions of POS and ATM are working efficiently.

Sequence swapping does not result in conformation swapping for the beta4/beta5 and beta8/beta9 beta-hairpin turns in human acidic fibroblast growth factor.

Science.gov (United States)

Kim, Jaewon; Lee, Jihun; Brych, Stephen R; Logan, Timothy M; Blaber, Michael

2005-02-01

The beta-turn is the most common type of nonrepetitive structure in globular proteins, comprising ~25% of all residues; however, a detailed understanding of effects of specific residues upon beta-turn stability and conformation is lacking. Human acidic fibroblast growth factor (FGF-1) is a member of the beta-trefoil superfold and contains a total of five beta-hairpin structures (antiparallel beta-sheets connected by a reverse turn). beta-Turns related by the characteristic threefold structural symmetry of this superfold exhibit different primary structures, and in some cases, different secondary structures. As such, they represent a useful system with which to study the role that turn sequences play in determining structure, stability, and folding of the protein. Two turns related by the threefold structural symmetry, the beta4/beta5 and beta8/beta9 turns, were subjected to both sequence-swapping and poly-glycine substitution mutations, and the effects upon stability, folding, and structure were investigated. In the wild-type protein these turns are of identical length, but exhibit different conformations. These conformations were observed to be retained during sequence-swapping and glycine substitution mutagenesis. The results indicate that the beta-turn structure at these positions is not determined by the turn sequence. Structural analysis suggests that residues flanking the turn are a primary structural determinant of the conformation within the turn.

Wind Power: A Turning Point. Worldwatch Paper 45.

Science.gov (United States)

Flavin, Christopher

Recent studies have shown wind power to be an eminently practical and potentially substantial source of electricity and direct mechanical power. Wind machines range from simple water-pumping devices made of wood and cloth to large electricity producing turbines with fiberglass blades nearly 300 feet long. Wind is in effect a form of solar…

Butane/Propane. An economical and technical turning point

International Nuclear Information System (INIS)

Fridman, G.

1998-01-01

During 1997, the sales of all energies dropped. Even for the liquid fuel, its consumption came back under the level of three million tons. To fight this regression, liquid fuels producers innovate in the cisterns and the bottles and carry on their efforts in logistic matters. Hopes are allowed thanks to the new taxing and the demand increasing in the car industry, for liquid fuels. (A.L.B.)

Individual Test Point Fluctuations of Macular Sensitivity in Healthy Eyes and Eyes With Age-Related Macular Degeneration Measured With Microperimetry.

Science.gov (United States)

Barboni, Mirella Telles Salgueiro; Szepessy, Zsuzsanna; Ventura, Dora Fix; Németh, János

2018-04-01

To establish fluctuation limits, it was considered that not only overall macular sensitivity but also fluctuations of individual test points in the macula might have clinical value. Three repeated measurements of microperimetry were performed using the Standard Expert test of Macular Integrity Assessment (MAIA) in healthy subjects ( N = 12, age = 23.8 ± 1.5 years old) and in patients with age-related macular degeneration (AMD) ( N = 11, age = 68.5 ± 7.4 years old). A total of 37 macular points arranged in four concentric rings and in four quadrants were analyzed individually and in groups. The data show low fluctuation of macular sensitivity of individual test points in healthy subjects (average = 1.38 ± 0.28 dB) and AMD patients (average = 2.12 ± 0.60 dB). Lower sensitivity points are more related to higher fluctuation than to the distance from the central point. Fixation stability showed no effect on the sensitivity fluctuation. The 95th percentile of the standard deviations of healthy subjects was, on average, 2.7 dB, ranging from 1.2 to 4 dB, depending on the point tested. Point analysis and regional analysis might be considered prior to evaluating macular sensitivity fluctuation in order to distinguish between normal variation and a clinical change. S tatistical methods were used to compare repeated microperimetry measurements and to establish fluctuation limits of the macular sensitivity. This analysis could add information regarding the integrity of different macular areas and provide new insights into fixation points prior to the biofeedback fixation training.

Investigating the relationship between energy expenditure, walking speed and angle of turning in humans.

Directory of Open Access Journals (Sweden)

M A McNarry

Full Text Available Recent studies have suggested that changing direction is associated with significant additional energy expenditure. A failure to account for this additional energy expenditure of turning has significant implications in the design and interpretation of health interventions. The purpose of this study was therefore to investigate the influence of walking speed and angle, and their interaction, on energy expenditure in 20 healthy adults (7 female; 28±7 yrs. On two separate days, participants completed a turning protocol at one of 16 speed- (2.5, 3.5, 4.5, 5.5 km∙h-1 and angle (0, 45, 90, 180° combinations, involving three minute bouts of walking, interspersed by three minutes seated rest. Each condition involved 5 m of straight walking before turning through the pre-determined angle with the speed dictated by a digital, auditory metronome. Tri-axial accelerometry and magnetometry were measured at 60 Hz, in addition to gas exchange on a breath-by-breath basis. Mixed models revealed a significant main effect for speed (F = 121.609, P < 0.001 and angle (F = 19.186, P < 0.001 on oxygen uptake ([Formula: see text] and a significant interaction between these parameters (F = 4.433, P < 0.001. Specifically, as speed increased, [Formula: see text] increased but significant increases in [Formula: see text] relative to straight line walking were only observed for 90° and 180° turns at the two highest speeds (4.5 and 5.5 km∙hr-1. These findings therefore highlight the importance of accounting for the quantity and magnitude of turns completed when estimating energy expenditure and have significant implications within both sport and health contexts.

Computationally determining the salience of decision points for real-time wayfinding support

Directory of Open Access Journals (Sweden)

Makoto Takemiya

2012-06-01

Full Text Available This study introduces the concept of computational salience to explain the discriminatory efficacy of decision points, which in turn may have applications to providing real-time assistance to users of navigational aids. This research compared algorithms for calculating the computational salience of decision points and validated the results via three methods: high-salience decision points were used to classify wayfinders; salience scores were used to weight a conditional probabilistic scoring function for real-time wayfinder performance classification; and salience scores were correlated with wayfinding-performance metrics. As an exploratory step to linking computational and cognitive salience, a photograph-recognition experiment was conducted. Results reveal a distinction between algorithms useful for determining computational and cognitive saliences. For computational salience, information about the structural integration of decision points is effective, while information about the probability of decision-point traversal shows promise for determining cognitive salience. Limitations from only using structural information and motivations for future work that include non-structural information are elicited.

Ammonia and greenhouse gases losses from mechanically turned cattle manure windrows: A regional composting network.

Science.gov (United States)

Arriaga, Haritz; Viguria, Maialen; López, Diana M; Merino, Pilar

2017-12-01

An on-farm composting network operates in the Basque Country (northern Spain), in which solid manure produced in livestock farms (mostly dairy and beef cattle) is composted through windrow turning. This network aims to produce a valuable resource (compost) for the farmers whereas the volume of the solid manure was reduced at farm level The objective of the study was to assess the gaseous losses (NH 3 and GHG) from 6 on-farm composting windrows (either deep litter systems or solid fraction after slurry separation) after turning operations. Monitored turning events occurred 1 to 4 months after establishing the heaps on the field. Ammonia and greenhouse gas (GHG) losses were estimated by the open and close chamber techniques, respectively. Results showed overall low emission rates related to the long degradation period of the windrows. Maximum NH 3 release was at 2.0 mg m -2 d -1 after the second/third turning events. Baseline N 2 O losses were below 50 mg m -2 d -1 , with maximum rates close to 500 mg m -2 d -1 some days after turning works. Methane emissions were mostly below 100 mg m -2 d -1 , while CO 2 losses were lower than 25 g m -2 d -1 . Carbon dioxide peaks (≈250 g m -2 d -1 ) were reached after the second/third turnings. Overall, gaseous N and C losses accounted for 0.1 and 1% of the initial N and C content of the windrows, respectively. The present study concluded that two/three turning operations in aged solid manure-derived compost windrows do not have significant effects on NH 3 and GHG losses. The magnitude of the gaseous losses from on-farm composting systems is dependent on the manure management practices at farm level (e.g. moment of windrow stacking). Copyright © 2017 Elsevier Ltd. All rights reserved.

Optical spectroscopic elucidation of beta-turns in disulfide bridged cyclic tetrapeptides.

Science.gov (United States)

Borics, Attila; Murphy, Richard F; Lovas, Sándor

2007-01-01

Vibrational circular dichroism (VCD) spectroscopic features of type II beta-turns were characterized previously, but, criteria for differentiation between beta-turn types had not been established yet. Model tetrapeptides, cyclized through a disulfide bridge, were designed on the basis of previous experimental results and the observed incidence of amino acid residues in the i + 1 and i + 2 positions in beta-turns, to determine the features of VCD spectra of type I and II beta-turns. The results were correlated with electronic circular dichroism (ECD) spectra and VCD spectra calculated from conformational data obtained by molecular dynamics (MD) simulations. All cyclic tetrapeptides yielded VCD signals with a higher frequency negative and a lower frequency positive couplet with negative lobes overlapping. MD simulations confirmed the conformational homogeneity of these peptides in solution. Comparison with ECD spectroscopy, MD, and quantum chemical calculation results suggested that the low frequency component of VCD spectra originating from the tertiary amide vibrations could be used to distinguish between types of beta-turn structures. On the basis of this observation, VCD spectroscopic features of type II and VIII beta-turns and ECD spectroscopic properties of a type VIII beta-turn were suggested. The need for independent experimental as well as theoretical investigations to obtain decisive conformational information was recognized. Copyright 2006 Wiley Periodicals, Inc.

Quenched spin tunneling and diabolical points in magnetic molecules. I. Symmetric configurations

Science.gov (United States)

Garg, Anupam

2001-09-01

The perfect quenching of spin tunneling that has previously been discussed in terms of interfering instantons, and has recently been observed in the magnetic molecule Fe8, is treated using a discrete phase integral (or Wentzel-Kramers-Brillouin) method. The simplest model Hamiltonian for the phenomenon leads to a Schrödinger equation that is a five-term recursion relation. This recursion relation is reflection symmetric when the magnetic field applied to the molecule is along the hard magnetic axis. A completely general Herring formula for the tunnel splittings for all reflection-symmetric five-term recursion relations is obtained. Using connection formulas for a nonclassical turning point that may be described as lying ``under the barrier,'' and which underlies the oscillations in the splitting as a function of magnetic field, this Herring formula is transformed into two other formulas that express the splittings in terms of a small number of action and actionlike integrals. These latter formulas appear to be generally valid, even for problems where the recursion contains more than five terms. The results for the model Hamiltonian are compared with experiment, numerics, previous instanton based approaches, and the limiting case of no magnetic field.

Beyond Cultural History? The Material Turn, Praxiography, and Body History

Directory of Open Access Journals (Sweden)

Iris Clever

2014-10-01

Full Text Available The body came to be taken seriously as a topic of cultural history during the “corporeal” or “bodily” turn in the 1980s and 1990s. Soon, however, critique was raised against these studies’ conceptualization of the body as discursively shaped and socially disciplined: individual bodily agency and feeling were felt to be absent in the idea of the material body. This article critically analyzes new approaches in the field of body history, particularly the so-called “material turn”. It argues that the material turn, especially in the guise of praxiography, has a lot to offer historians of the body, such as more attention to material practices, to different kinds of actors and a more open eye to encounters. Potential problems of praxiographical analyses of the body in history include the complicated relationship between discourses and practices and the neglect of the political and feminist potential of deconstructive discourse analyses. However, a focus on the relationship between practices of knowledge production and the representation of the body may also provide new ways of opening up historical power relations.

Turning university professors into competent learners

NARCIS (Netherlands)

Stefanova, Eliza; Ilieva, Miroslava; Nikolova, Nikolina; Stefanov, Krassen

2008-01-01

Stefanova, E., Ilieva, M., Nikolova, N, & Stefanov, K. (2008). Turning university professors into competent learners. In H. W. Sligte & R. Koper (Eds.), Proceedings of the 4th TENCompetence Open Workshop. Empowering Learners for Lifelong Competence Development: pedagogical, organisational and

Cellular Reprogramming–Turning the Clock Back

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 6. Cellular Reprogramming - Turning the Clock Back - Nobel Prize in Physiology or Medicine, 2012. Deepa Subramanyam. General Article Volume 18 Issue 6 June 2013 pp 514-521 ...

Comparison between voltage by turn measured on different tokamaks operating in hybrid wave current drive regime

International Nuclear Information System (INIS)

Briffod, G.; Hoang, G.T.

1987-06-01

On a tokamak in a current drive operation with a hybrid wave, the R.F. current is estimated from the voltage drop by plasma turn generated by R.F. power application. This estimated current is not proportional to the injected power. There still exists in the plasma an electric field corresponding to the current part produced by induction. The role evaluation of this parameter on the current drive efficiency is important. In this report the relation voltage-R.F. current is studied on Petula and results on the voltage evolution by turn on different machines are compared [fr

Models and Algorithms for Tracking Target with Coordinated Turn Motion

Directory of Open Access Journals (Sweden)

Xianghui Yuan

2014-01-01

Full Text Available Tracking target with coordinated turn (CT motion is highly dependent on the models and algorithms. First, the widely used models are compared in this paper—coordinated turn (CT model with known turn rate, augmented coordinated turn (ACT model with Cartesian velocity, ACT model with polar velocity, CT model using a kinematic constraint, and maneuver centered circular motion model. Then, in the single model tracking framework, the tracking algorithms for the last four models are compared and the suggestions on the choice of models for different practical target tracking problems are given. Finally, in the multiple models (MM framework, the algorithm based on expectation maximization (EM algorithm is derived, including both the batch form and the recursive form. Compared with the widely used interacting multiple model (IMM algorithm, the EM algorithm shows its effectiveness.

Turn-taking in Human Communication--Origins and Implications for Language Processing.

Science.gov (United States)

Levinson, Stephen C

2016-01-01

Most language usage is interactive, involving rapid turn-taking. The turn-taking system has a number of striking properties: turns are short and responses are remarkably rapid, but turns are of varying length and often of very complex construction such that the underlying cognitive processing is highly compressed. Although neglected in cognitive science, the system has deep implications for language processing and acquisition that are only now becoming clear. Appearing earlier in ontogeny than linguistic competence, it is also found across all the major primate clades. This suggests a possible phylogenetic continuity, which may provide key insights into language evolution. Copyright © 2015 Elsevier Ltd. All rights reserved.

Developments Related to Tourism and Their Effects in Debrecen Following the Turn of the Millennium (Northern Great Plain Region, Hungary Success Or Failure?

Directory of Open Access Journals (Sweden)

Mária Vasvári

2013-04-01

Full Text Available The present paper focuses on the developments related to tourism and their effects in Debrecen, the largest city in the Northern Great Plain Region most of all in the time period after the country joining the European Union. The tourist industrial development regarding the infrastructure and supra-structure inDebrecen is presented. These developed further the traditionally popular attractions (Great Forest of the city. Relationship between the demand and reception conditions are described reflecting statistic data and the role of Debrecen in the market is analysed in relation to several other greater towns of the country. Data reveal that the number of visitors did not increase despite the developments related to tourism in the years following the turn of the millennium, even so it decreased after 2008 similarly to other greater towns of the country. Our questionnaire survey performed among the inhabitants and visitors as well revealed that the realized investments and the produced new attractions have only a slight role in attracting the target audience. Still the traditionally popular attractions attract most of the visitors to Debrecen therefore the most important task for the leaders of the Debrecen-Hortobágy Tourism Destination Management founded in 2010 is to propagate the new attraction elements.

Biomechanical Evaluation of a Bed Feature to Assist in Turning and Laterally Repositioning Patients.

Science.gov (United States)

Wiggermann, Neal

2016-08-01

This study investigated the effects of hospital bed features on the biomechanical stresses experienced by nurses when turning and laterally repositioning patients. Turn Assist, a common feature in ICU beds that helps to rotate patients, and side rail orientation were evaluated. Manual patient handling is a risk factor for musculoskeletal injury, and turning patients is one of the most common patient handling activities. No known studies have evaluated bed attributes such as the Turn Assist feature and side rail orientation that may affect the stresses experienced by the nurse. Nine female nurses laterally repositioned and turned a 63-kg and 123-kg subject on an ICU bed while motion capture, ground reaction forces, and hand force data were recorded. Loading of the spine and shoulder was modeled using 3D Static Strength Prediction Program (3DSSPP). Spine compression and shear forces did not exceed recommended limits when turning or laterally repositioning. However, the mean pull forces required to manually laterally reposition even the 63-kg subject was 340 Newtons, more than 50% greater than limits established in psychophysical testing. Turn Assist considerably reduced spine loading and pull forces for both turning and laterally repositioning. Lowering side rails reduced spinal compression by 11% when turning patients. Laterally repositioning patients as part of turning may pose an injury risk to caregivers. Turn Assist reduces physical loading on nurses when turning and repositioning patients. Caregivers should consider using Turn Assist and other aids such as mechanical lifts or sliding sheets especially when turning patients requires lateral repositioning. © 2015, Human Factors and Ergonomics Society.

U-turn type continuous irradiation method and device for radiation-irradiated capsule

International Nuclear Information System (INIS)

Kikuchi, Takayuki.

1997-01-01

A capsule to be irradiated is moved while being rotated in one of conveying shafts disposed in a reactor to conduct irradiation treatment. Then, the irradiated capsule is made U-turn in the reactor, inserted to the other conveying shaft and moved while being rotated to conduct irradiation treatment again, and then transported out of the reactor. The device comprises a rotational conveying shaft for moving the irradiated capsule while rotating it, a conveying gear for U-turning the irradiated capsule in the reactor and inserting it to the conveying shaft and a driving mechanism for synchronously rotating the conveying gear relative to the conveying shaft at a constant ratio. Mechanical time loss and manual operation time loss can be reduced upon loading and taking up of the irradiated capsule. Then, the amount of irradiation treatment per unit time is increased, and an optional neutron irradiation amount can be obtained thereby enabling to reduce operator's radiation exposure. (N.H.)

Virtual reality training improves turning capacity and functional reach in stroke patients

International Nuclear Information System (INIS)

Malik, A.N.; Masood, T.

2017-01-01

Objective: To determine the added effects of virtual reality training on turning capacity, gait parameters and functional reach capacity of stroke patients compared to task oriented training alone. Methodology: A randomized control trial was conducted from February 2016 to July 2106 at Physical Rehabilitation Department Pakistan Railway Hospital, Rawalpindi, Pakistan. Twenty stroke patients were selected through purposive sampling. The patients were randomly assigned through sealed envelope method into two groups; Task Oriented Training (TOT) and Virtual Reality Training (VRT) Group. The standardized tools were used for assessment. The TOT was provided for 4 days per week for 6 weeks while VRT group received additional exer-gaming training during sessions. Results: Significant improvement was observed in both groups regarding reaching forward, turning 360, gait pivot turn (p a 0.01) and FRT (p a 0.001). The two groups were statistically different from each other in terms of turning capacity, reaching forward, gait pivot turn and functional reach after 6 weeks of intervention (p a 0.05) Conclusion: Addition of virtual reality training further improves the significant improvement caused by task oriented training on turning capacity, reaching forward, gait pivot turn and functional reach in stroke patients. (author)

Incorporating beta-turns and a turn mimetic out of context in loop 1 of the WW domain affords cooperatively folded beta-sheets.

Science.gov (United States)

Kaul, R; Angeles, A R; Jäger, M; Powers, E T; Kelly, J W

2001-06-06

To probe the conformational requirements of loop 1 in the Pin1 WW domain, the residues at the i + 2 and i + 3 positions of a beta-turn within this loop were replaced by dPro-Gly and Asn-Gly, which are known to prefer the conformations required at the i + 1 and i + 2 positions of type II' and type I' beta-turns. Conformational specificity or lack thereof was further examined by incorporating into the i + 2 and i + 3 positions a non-alpha-amino acid-based beta-turn mimetic (4-(2'-aminoethyl)-6-dibenzofuran propionic acid residue, 1), which was designed to replace the i + 1 and i + 2 positions of beta-turns. All these Pin WW variants are monomeric and folded as discerned by analytical ultracentrifugation, NMR, and CD. They exhibit cooperative two-state transitions and display thermodynamic stability within 0.5 kcal/mol of the wild-type WW domain, demonstrating that the acquisition of native structure and stability does not require a specific sequence and, by extension, conformation within loop 1. However, it could be that these loop 1 mutations alter the kinetics of antiparallel beta-sheet folding, which will be addressed by subsequent kinetic studies.

Point specificity in acupuncture

Directory of Open Access Journals (Sweden)

Choi Emma M

2012-02-01

Full Text Available Abstract The existence of point specificity in acupuncture is controversial, because many acupuncture studies using this principle to select control points have found that sham acupoints have similar effects to those of verum acupoints. Furthermore, the results of pain-related studies based on visual analogue scales have not supported the concept of point specificity. In contrast, hemodynamic, functional magnetic resonance imaging and neurophysiological studies evaluating the responses to stimulation of multiple points on the body surface have shown that point-specific actions are present. This review article focuses on clinical and laboratory studies supporting the existence of point specificity in acupuncture and also addresses studies that do not support this concept. Further research is needed to elucidate the point-specific actions of acupuncture.

Comparison of Dose When Prescribed to Point A and Point H for Brachytherapy in Cervical Cancer

Energy Technology Data Exchange (ETDEWEB)

Gang, Ji Hyeong; Gim, Il Hwan; Hwang, Seon Boong; Kim, Woong; Im, Hyeong Seo; Gang, Jin Mook; Gim, Gi Hwan; Lee, Ah Ram [Dept. of Radiation Oncology, Korea Institute of Radiological and Medical Sciences, Seou (Korea, Republic of)

2012-09-15

The purpose of this study is to compare plans prescribed to point A with these prescribed to point H recommended by ABS (American Brachytherapy Society) in high dose rate intracavitary brachytherapy for cervical carcinoma. This study selected 103 patients who received HDR (High Dose Rate) brachytherapy using tandem and ovoids from March 2010 to January 2012. Point A, bladder point, and rectal point conform with Manchester System. Point H conforms with ABS recommendation. Also Sigmoid colon point, and vagina point were established arbitrarily. We examined distance between point A and point H. The percent dose at point A was calculated when 100% dose was prescribed to point H. Additionally, the percent dose at each reference points when dose is prescribed to point H and point A were calculated. The relative dose at point A was lower when point H was located inferior to point A. The relative doses at bladder, rectal, sigmoid colon, and vagina points were higher when point H was located superior to point A, and lower when point H was located inferior to point A. This study found out that as point H got located much superior to point A, the absorbed dose of surrounding normal organs became higher, and as point H got located much inferior to point A, the absorbed dose of surrounding normal organs became lower. This differences dose not seem to affect the treatment. However, we suggest this new point is worth being considered for the treatment of HDR if dose distribution and absorbed dose at normal organs have large differences between prescribed to point A and H.

Comprehension and utilisation of pointing gestures and gazing in dog-human communication in relatively complex situations.

Science.gov (United States)

Lakatos, Gabriella; Gácsi, Márta; Topál, József; Miklósi, Adám

2012-03-01

The aim of the present investigation was to study the visual communication between humans and dogs in relatively complex situations. In the present research, we have modelled more lifelike situations in contrast to previous studies which often relied on using only two potential hiding locations and direct association between the communicative signal and the signalled object. In Study 1, we have provided the dogs with four potential hiding locations, two on each side of the experimenter to see whether dogs are able to choose the correct location based on the pointing gesture. In Study 2, dogs had to rely on a sequence of pointing gestures displayed by two different experimenters. We have investigated whether dogs are able to recognise an 'indirect signal', that is, a pointing toward a pointer. In Study 3, we have examined whether dogs can understand indirect information about a hidden object and direct the owner to the particular location. Study 1 has revealed that dogs are unlikely to rely on extrapolating precise linear vectors along the pointing arm when relying on human pointing gestures. Instead, they rely on a simple rule of following the side of the human gesturing. If there were more targets on the same side of the human, they showed a preference for the targets closer to the human. Study 2 has shown that dogs are able to rely on indirect pointing gestures but the individual performances suggest that this skill may be restricted to a certain level of complexity. In Study 3, we have found that dogs are able to localise the hidden object by utilising indirect human signals, and they are able to convey this information to their owner.

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Energy Technology Data Exchange (ETDEWEB)

Yang, Xi [Brookhaven National Laboratory, Upton, Long Island, NY 11973 (United States); Huang, Xiaobiao, E-mail: xiahuang@slac.stanford.edu [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States)

2016-08-21

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. The method has been successfully demonstrated on the NSLS-II storage ring.

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Energy Technology Data Exchange (ETDEWEB)

Yang, Xi [Brookhaven National Lab. (BNL), Upton, NY (United States); Huang, Xiaobiao [SLAC National Accelerator Lab., Menlo Park, CA (United States)

2016-08-01

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. Furthermore, the fitting results are used for lattice correction. Our method has been successfully demonstrated on the NSLS-II storage ring.

HTS planar gradiometer consisting of SQUID with multi-turn input coil and large pickup coil made of GdBCO coated conductor

International Nuclear Information System (INIS)

Tsukamoto, Akira; Adachi, Seiji; Oshikubo, Yasuo; Hato, Tsunehiro; Enpuku, Keiji; Sugisaki, Masaki; Arai, Eiichi; Tanabe, Keiichi

2013-01-01

Highlights: ► We fabricated a large HTS gradiometer with 350-mm-long baseline. ► A 6-turn gradiometric planar pickup was made of a HTS coated conductor. ► A 26-turn HTS input coil chip was stacked on a HTS thin film gradiometer chip. ► A mechanical balancing structure was also implemented. ► The fabricated gradiometer showed a gradient field noise of 0.8 fT/cm Hz 1/2 . -- Abstract: We have investigated the fabrication of a high-temperature superconducting (HTS) gradiometer with long baseline for geophysical applications. The proof-of-concept gradiometer using a 1-turn pickup coil made of a GdBa 2 Cu 3 O y coated conductor (GCC) and 5.5-turn input coil integrated on a SQUID was fabricated in our previous work. In this study, we have optimized the device structure to improve the frequency response, gradient field sensitivity and gradiometer balance. The fabricated flux transformer consists of a 6-turn planar gradiometric pickup coil and a 26-turn input coil made of an HTS thin film. A low-melting-point alloy was used to connect polished Ag surfaces of the CGG pickup coil and Au pads of the input coil. An HTS SQUID was formed on another substrate and stacked on the input coil. A mechanical balancing structure using three pieces of GCC as a superconducting shield was also implemented. The fabricated gradiometer showed a gradient field noise of 0.8 fT/cm Hz 1/2 in the white noise regions, a gradiometer balance of 1/142, and a cutoff frequency of 9 Hz corresponding to a 2 mΩ contact resistance between the pickup coil and the input coil

[Abnormal head turn in a patient with Brown's syndrome].

Science.gov (United States)

van Waveren, M; Krzizok, T; Besch, D

2008-08-01

We report on an eight-year-old boy, who was presented in our clinic because of head turn. The cause of the tortecollis (ocular or general) in this case was and still cannot be explained. Only by applying extensive prism adaptation tests it was possible to prove the ocular character of the head turn. An eight-year-old boy with Brown's syndrome was referred to us because of a head tilt to the left side. Six months previously surgery on the M. obl. superior of the right eye was performed in another clinic. No improvement of the head tilt could be observed after the operation. In addition, an exotropia became decompensated. Under a 3-day occlusion of one eye, no change of the head turn and the squint could be measured. No other cause of the head turn could be found by an orthopaedist and a paediatrist. Under a prism of 20 cm/m basis in and 10 cm/m basis against the positive vertical deviation, the head tilt decreased, so that we decided to do a second surgery. The head tilting had not resumed at one year after the surgery. Although the initial diagnostic findings ruled out an ocular cause, it was possible to lessen the head tilting with the aid of the prism adaptation test. This case study emphasises the usefulness of a prism adaptation test of several days duration in order to validate an ocular cause of head turn and to determine an adequate indication for surgery.

How turn-taking strategies influence users’ impressions of an agent

NARCIS (Netherlands)

ter Maat, Mark; Truong, Khiet Phuong; Heylen, Dirk K.J.; Allbeck, Jan; Badler, Norman; Bickmore, Timothy; Pelachaud, Catherine; Safonova, Alla

Different turn-taking strategies of an agent influence the impression that people have of it. We recorded conversations of a human with an interviewing agent, controlled by a wizard and using a particular turn-taking strategy. A questionnaire with 27 semantic differential scales concerning

Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

Energy Technology Data Exchange (ETDEWEB)

Grigg, D.A.; Russell, P.E.; Dow, T.A.

1988-12-01

Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

Children's negative emotions and ego-resiliency: longitudinal relations with social competence.

Science.gov (United States)

Taylor, Zoe E; Eisenberg, Nancy; VanSchyndel, Sarah K; Eggum-Wilkens, Natalie D; Spinrad, Tracy L

2014-04-01

We examined the relations of negative emotions in toddlerhood to the development of ego-resiliency and social competence across early childhood. Specifically, we addressed whether fear and anger/frustration in 30-month-old children (N = 213) was associated with the development of ego-resiliency across 4 time points (42 to 84 months), and, in turn, whether ego-resiliency predicted social competence at 84 months. Child anger/frustration negatively predicted the intercept of ego-resiliency at 42 months (controlling for prior ego-resiliency at 18 months) as well as the slope. Fear did not significantly predict either the intercept or slope of ego-resiliency in the structural model, although it was positively correlated with anger/frustration and was negatively related to ego-resiliency in zero-order correlations. The slope of ego-resiliency was positively related to children's social competence at 84 months; however, the intercept of ego-resiliency (set at 42 months) was not a significant predictor of later social competence. Furthermore, the slope of ego-resiliency mediated the relations between anger/frustration and children's later social competence. The results suggest that individual differences in anger/frustration might contribute to the development of ego-resiliency, which, in turn, is associated with children's social competence.

A turning point in the concept of justice: from Adam Smith to John Stuart Mill

Directory of Open Access Journals (Sweden)

Estrella Trincado Aznar

2012-01-01

Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

A turning point in the concept of justice: from Adam Smith to John Stuart Mill

Directory of Open Access Journals (Sweden)

Estrella Trincado Aznar

2015-07-01

Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

Performance of diamond and point attack coal cutter picks

Energy Technology Data Exchange (ETDEWEB)

Liu, Y. [CSIRO, Brisbane, Qld. (Australia). Division of Exploration and Mining

1996-12-31

This paper presents results of laboratory experiments and field trials of PDC (Polycrystalline Diamond Compact) and PA (Point Attack) coal cutter picks. Laboratory cutting tests included linear rock and coal cutting and turning rock cutting. The following parameters were measured to assess performance of PDC and PA cutter picks: cutting force, normal force, specific energy consumption, yield, dust generation and ignitional characteristics (temperature rise). Field trials were conducted on a longwall shearer. Performance of both types of pick interims of pick life and dust generation were assessed. 3 refs., 18 figs., 3 tabs.

MIMIC: An Innovative Methodology for Determining Mobile Laser Scanning System Point Density

Directory of Open Access Journals (Sweden)

Conor Cahalane

2014-08-01

Full Text Available Understanding how various Mobile Mapping System (MMS laser hardware configurations and operating parameters exercise different influence on point density is important for assessing system performance, which in turn facilitates system design and MMS benchmarking. Point density also influences data processing, as objects that can be recognised using automated algorithms generally require a minimum point density. Although obtaining the necessary point density impacts on hardware costs, survey time and data storage requirements, a method for accurately and rapidly assessing MMS performance is lacking for generic MMSs. We have developed a method for quantifying point clouds collected by an MMS with respect to known objects at specified distances using 3D surface normals, 2D geometric formulae and line drawing algorithms. These algorithms were combined in a system called the Mobile Mapping Point Density Calculator (MIMIC and were validated using point clouds captured by both a single scanner and a dual scanner MMS. Results from MIMIC were promising: when considering the number of scan profiles striking the target, the average error equated to less than 1 point per scan profile. These tests highlight that MIMIC is capable of accurately calculating point density for both single and dual scanner MMSs.

Zero-point oscillations, zero-point fluctuations, and fluctuations of zero-point oscillations

International Nuclear Information System (INIS)

Khalili, Farit Ya

2003-01-01

Several physical effects and methodological issues relating to the ground state of an oscillator are considered. Even in the simplest case of an ideal lossless harmonic oscillator, its ground state exhibits properties that are unusual from the classical point of view. In particular, the mean value of the product of two non-negative observables, kinetic and potential energies, is negative in the ground state. It is shown that semiclassical and rigorous quantum approaches yield substantially different results for the ground state energy fluctuations of an oscillator with finite losses. The dependence of zero-point fluctuations on the boundary conditions is considered. Using this dependence, it is possible to transmit information without emitting electromagnetic quanta. Fluctuations of electromagnetic pressure of zero-point oscillations are analyzed, and the corresponding mechanical friction is considered. This friction can be viewed as the most fundamental mechanism limiting the quality factor of mechanical oscillators. Observation of these effects exceeds the possibilities of contemporary experimental physics but almost undoubtedly will be possible in the near future. (methodological notes)

Turn-Taking Based on Information Flow for Fluent Human-Robot Interaction

OpenAIRE

Thomaz, Andrea L.; Chao, Crystal

2011-01-01

Turn-taking is a fundamental part of human communication. Our goal is to devise a turn-taking framework for human-robot interaction that, like the human skill, represents something fundamental about interaction, generic to context or domain. We propose a model of turn-taking, and conduct an experiment with human subjects to inform this model. Our findings from this study suggest that information flow is an integral part of human floor-passing behavior. Following this, we implement autonomous ...

Measurement of tool forces in diamond turning

Energy Technology Data Exchange (ETDEWEB)

Drescher, J.; Dow, T.A.

1988-12-01

A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

Part-turn gearboxes for electric actuators; Schwenkgetriebe fuer elektrische Stellantriebe

Energy Technology Data Exchange (ETDEWEB)

Herbstritt, M. [Riester (W.) GmbH und Co. KG, Muellheim (Germany)

2002-09-01

Different types of gearboxes provide a useful complement to the electric actuator type ranges. The gearboxes can be combined with the actuators in many ways. Multi-turn actuators, for example, can be turned into part-turn actuators. When using a modular system, a suitable solution for almost any automation task in the field of industrial valves can be found. (orig.) [German] Sinnvoll ergaenzt werden elektrische Stellantriebe fuer Armaturen durch verschiedene Arten von Getrieben. Die Getriebe sind in vielfaeltiger Weise mit den Stellantrieben kombinierbar. So werden beispielsweise aus Drehantrieben Schwenkantriebe. Mit einem Baukasten-System laesst sich so fuer nahezu jede Automatisierungsaufgabe im Bereich der Industriearmaturen eine passende Loesung finden. (orig.)

Analyses of quenching process during turn-off of plasma electrolytic carburizing on carbon steel

International Nuclear Information System (INIS)

Wu, Jie; Liu, Run; Xue, Wenbin; Wang, Bin; Jin, Xiaoyue; Du, Jiancheng

2014-01-01

Highlights: • Cooling rate of carburized steel at the end of PEC treatment is measured. • The quench hardening in the fast or slow turn-off mode hardly takes place. • Decrease of the surface roughness during slow turn-off process is found. • A slow turn-off mode is recommended to replace the conventional turn-off mode. - Abstract: Plasma electrolytic carburizing (PEC) under different turn-off modes was employed to fabricate a hardening layer on carbon steel in glycerol solution without stirring at 380 V for 3 min. The quenching process in fast turn-off mode or slow turn-off mode of power supply was discussed. The temperature in the interior of steel and electron temperature in plasma discharge envelope during the quenching process were evaluated. It was found that the cooling rates of PEC samples in both turn-off modes were below 20 °C/s, because the vapor film boiling around the steel sample reduced the cooling rate greatly in terms of Leidenfrost effect. Thus the quench hardening hardly took place, though the slow turn-off mode slightly decreased the surface roughness of PEC steel. At the end of PEC treatment, the fast turn-off mode used widely at present cannot enhance the surface hardness by quench hardening, and the slow turn-off mode was recommended in order to protect the electronic devices against a large current surge

A Practice Turn for Teacher Education?

Science.gov (United States)

Reid, Jo-Anne

2011-01-01

Within the Research Institute for Professional Practice, Learning and Education (RIPPLE) at Charles Sturt University, teacher education researchers have been quick to respond to the opportunities created by what is known as "the practice turn" that characterises contemporary theory around the globe and across disciplines. We are working,…

The Dynamic Turn in Quantum Logic

NARCIS (Netherlands)

Baltag, A.; Smets, S.

2012-01-01

In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

The dynamic turn in quantum logic

NARCIS (Netherlands)

Baltag, Alexandru; Smets, Sonja

In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

Business Intelligence: Turning Knowledge into Power

Science.gov (United States)

Endsley, Krista

2009-01-01

Today, many school districts are turning to business intelligence tools to retrieve, organize, and share knowledge for faster analysis and more effective, guided decision making. Business intelligence (BI) tools are the technologies and applications that gather and report information to help an organization's leaders make better decisions. BI…

Novel β-amyloid aggregation inhibitors possessing a turn mimic.

Science.gov (United States)

Hamada, Yoshio; Miyamoto, Naoko; Kiso, Yoshiaki

2015-04-01

Amyloid β peptide, the main component of senile plaques found in the brain of Alzheimer disease (AD) patients, is a molecular target for AD therapeutic intervention. A number of potential AD therapeutics have been reported, including inhibitors of β-secretase, γ-secretase, and Aβ aggregation, and anti-amyloid agents, such as neprilysin, insulin degrading enzyme (IDE), and Aβ antibodies. Recently, we reported potent small-sized β-secretase (BACE1) inhibitors, which could serve as anti-AD drugs. However AD is a progressive disorder, where dementia symptoms gradually worsen over several decades, and therefore may require many years to get cured. One possible way to achieve a greater therapeutic effect is through simultaneous administration of multiple drugs, similar to those used in Highly Active Anti-Retroviral Therapy (HAART) used to treat AIDS. In order to overcome AD, we took a drug discovery approach to evaluate, novel β-amyloid aggregation inhibitors. Previously, we reported that a tong-type compound possessing a turn mimic as the inhibitor of HIV-1 protease dimerization. Oligomerized amyloid β peptides contain a turn structure within the molecule. Here, we designed and synthesized novel β-amyloid aggregation inhibitors with a turn-mimic template, based on the turn conformer of the oligomerized amyloid β peptides. Copyright © 2015 Elsevier Ltd. All rights reserved.

A high performance gate drive for large gate turn off thyristors

Energy Technology Data Exchange (ETDEWEB)

Szilagyi, C.P.

1993-01-01

Past approaches to gate turn-off (GTO) gating are application oriented, inefficient and dissipate power even when inactive. They allow the gate to avalanch, and do not reduce GTO turn-on and turn-off losses. A new approach is proposed which will allow modular construction and adaptability to large GTOs in the 50 amp to 2000 amp range. The proposed gate driver can be used in large voltage source and current source inverters and other power converters. The approach consists of a power metal-oxide-silicon field effect transistor (MOSFET) technology gating unit, with associated logic and supervisory circuits and an isolated flyback converter as the dc power source for the gating unit. The gate driver formed by the gating unit and the flyback converter is designed for 4000 V isolation. Control and supervisory signals are exchanged between the gate driver and the remote control system via fiber optics. The gating unit has programmable front-porch current amplitude and pulse-width, programmable closed-loop controlled back-porch current, and a turn-off switch capable of supplying negative gate current at demand as a function of peak controllable forward anode current. The GTO turn-on, turn-off and gate avalanch losses are reduced to a minimum. The gate driver itself has minimum operating losses. Analysis, design and practical realization are reported. 19 refs., 54 figs., 1 tab.

Ultimate refrigerating conditions, behavior turning and a thermodynamic analysis for absorption–compression hybrid refrigeration cycle

International Nuclear Information System (INIS)

Zheng Danxing; Meng Xuelin

2012-01-01

Highlights: ► Two novel fundamental concepts of the absorption refrigeration cycle were proposed. ► The interaction mechanism of compressor pressure increasing with other key-parameters was investigated. ► A set of optimal operating condition of hybrid refrigeration cycle was found. ► A simulation and investigation for R134a-DMF hybrid refrigeration cycle was performed. - Abstract: The absorption–compression hybrid refrigeration cycle has been considered as an effective approach to reduce the mechanical work consumption by using low-grade heat, such as solar energy. This work aims at studying the thermodynamic mechanism of the hybrid refrigeration cycle. Two fundamental concepts have been proposed, which are the ultimate refrigerating temperature (or the ultimate temperature lift) and the behavior turning. On the basis of that, the interaction mechanism of compressor pressure increasing with other key-parameters and the impact of compressor pressure increasing on the cycle performance have been investigated. The key-parameters include the concentration difference, the circulation ratio of working fluid, etc. The work points out that the hybrid refrigeration cycle performance varies with the change of compressor outlet pressure and depends on which one achieves dominance in the hybrid refrigeration cycle, the absorption sub-system or the compression sub-system. The behavior turning point during parameters changing corresponds to a maximum value of the heat powered coefficient of performance. In this case, the hybrid refrigeration cycle performance is optimal because the low-grade heat utilization is the most effective. In addition, to validate the theoretical analysis, a solar hybrid refrigeration cycle with R134a–DMF as working pair was simulated. The Peng–Robinson equation of state was adopted to calculate thermophysical properties when the reliability assessment of the prediction models on the available literature data of R134a–DMF system had been

Turn-on delay of QD and QW laser diodes: What is the difference?

International Nuclear Information System (INIS)

Sokolovskii, G S; Dudelev, V V; Kolykhalova, E D; Deryagin, A G; Maximov, M V; Nadtochiy, A M; Kuchinskii, V I; Mikhrin, S S; Livshits, D A; Viktorov, E A; Erneux, T

2013-01-01

Turn-on delay of laser diodes with quantum-sized active media is investigated both theoretically and experimentally. In this research we show the striking difference in turn-on delay of quantum dot and quantum well laser diodes: With quantum-well lasers turn on delay tends to zero in the limit of high pumping, while with quantum dot lasers turn-on delay has the non-vanishing component which is independent of pumping

Extended phenotype: nematodes turn ants into bird-dispersed fruits

DEFF Research Database (Denmark)

Hughes, D P; Kronauer, D J C; Boomsma, J J

2008-01-01

A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs.......A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs....

Turning lead into gold

DEFF Research Database (Denmark)

Jensen, Steffen Moltrup Ernø

For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

Effect of Antenna Pointing Errors on SAR Imaging Considering the Change of the Point Target Location

Science.gov (United States)

Zhang, Xin; Liu, Shijie; Yu, Haifeng; Tong, Xiaohua; Huang, Guoman

2018-04-01

Towards spaceborne spotlight SAR, the antenna is regulated by the SAR system with specific regularity, so the shaking of the internal mechanism is inevitable. Moreover, external environment also has an effect on the stability of SAR platform. Both of them will cause the jitter of the SAR platform attitude. The platform attitude instability will introduce antenna pointing error on both the azimuth and range directions, and influence the acquisition of SAR original data and ultimate imaging quality. In this paper, the relations between the antenna pointing errors and the three-axis attitude errors are deduced, then the relations between spaceborne spotlight SAR imaging of the point target and antenna pointing errors are analysed based on the paired echo theory, meanwhile, the change of the azimuth antenna gain is considered as the spotlight SAR platform moves ahead. The simulation experiments manifest the effects on spotlight SAR imaging caused by antenna pointing errors are related to the target location, that is, the pointing errors of the antenna beam will severely influence the area far away from the scene centre of azimuth direction in the illuminated scene.

[The actual Russian legislation in sphere of turn-over of drug agents and psychotropic substances].

Science.gov (United States)

Abramov, A Yu; Kosolapova, N V; Mikhaiylova, Yu V

2014-01-01

The drug abuse is a social occurrence. Hence, the social economic methods are the first of all means of combating this evil. At the same time, measures of especially juridical character possess significant value since they develop corresponding legal base for applying another measures. In the Russian Federation, during fifteen years the new policy of public regulation and normative legal base in the area of legal turn-over of drug agents, psychotropic substances and their precursors were developed factually from zero ground. However, the current national legislation is not deprived of some flaws and contradictions. Frequently a uniform practice of interpretation and application of legal rules regulating the controlled turn-over is lacking. On the one hand, this circumstance decreases effectiveness of action of such rules and on the other hand favors development of situations for outflow of pharmaceuticals from legal turn-over to illegal traffic. The becoming of the Russian legislation in the area of turn-over of drug agents, precursors and psychotropic substances relates to the period of late 1990s when the Federal Law No 3 FZ "On drug agents and psychotropic substances" of January 8 1998 was developed and passed by the State Duma of the Russian Federation. The given law completely conforms to principles of legal regulation of turn-over of drug agents and psychotropic substances determined by the Constitution of the Russian Federation (provisions 76, 90, 104, 105) and federal laws ("On the government of the Russian Federation" of December 17 1997, "On the ombudsman in the Russian Federation" of February 26 1997). The main characteristic of legal rules included into given group of sources of law is that they contain regulations of general disposition as basic ones for inferior sources of law. The analysis of basic Federal law No 3 FZ "On drug agents and psychotropic substances" of January 8 1998 makes it possible to conclude that in in Russia the international legal

Anatomical relation between S1 sacroiliac screws' entrance points and superior gluteal artery.

Science.gov (United States)

Zhao, Yong; You, Libo; Lian, Wei; Zou, Dexin; Dong, Shengjie; Sun, Tao; Zhang, Shudong; Wang, Dan; Li, Jingning; Li, Wenliang; Zhao, Yuchi

2018-01-18

To conduct radiologic anatomical study on the relation between S1 sacroiliac screws' entry points and the route of the pelvic outer superior gluteal artery branches with the aim to provide the anatomical basis and technical reference for the avoidance of damage to the superior gluteal artery during the horizontal sacroiliac screw placement. Superior gluteal artery CTA (CT angiography) vascular imaging of 74 healthy adults (37 women and 37 men) was done with 128-slice spiral CT (computed tomography). The CT attendant-measuring software was used to portray the "safe bony entrance area" (hereinafter referred to as "Safe Area") of the S1 segment in the standard lateral pelvic view of three-dimensional reconstruction. The anatomical relation between S1 sacroiliac screws' Safe Area and the pelvic outer superior gluteal artery branches was observed and recorded. The number of cases in which artery branches intersected the Safe Area was counted. The cases in which superior gluteal artery branches disjointed from the Safe Area were identified, and the shortest distance between the Safe Area and the superior gluteal artery branch closest to the Safe Area was measured. Three cases out of the 74 sample cases were excluded from this study as they were found to have no bony space for horizontal screw placement in S1 segment. Among the remaining 71 sample cases, there are 32 cases (45.1%) where the deep superior branch of superior gluteal artery passes through the Safe Area of S1 entrance point. There was no distinguishing feature and rule on how the deep superior branches and the Safe Area overlapped. In the 39 cases in which superior gluteal artery branches disjointed from the Safe Area, the deep superior branches of superior gluteal artery were the branches closest to the Safe Area and the part of the branch closest to the Safe Area was located in front of the widest part of the Safe Area. The shortest distance between the deep superior branch and the Safe Area is 0.86�

The Timed 180° Turn Test for Assessing People with Hemiplegia from Chronic Stroke

Directory of Open Access Journals (Sweden)

Regan L. Robinson

2018-01-01

Full Text Available Background. Turning is ubiquitous in activities of daily living. For people with hemiplegia, persistent impairments in strength, balance, and coordination will affect their ability to turn safely. Consequently, turning retraining should be addressed in rehabilitation programs. To measure turning for these individuals, a reliable clinical tool is required. Objective. To investigate (i the intrarater, interrater, and test-retest reliability of the timed 180° turn test; (ii the correlation of the timed 180° turn test with other measures of stroke-specific impairments; and (iii the cut-off time that best discriminates individuals with hemiplegia from chronic stroke and healthy older adults. Methods. 33 individuals with hemiplegia due to chronic stroke and 32 healthy elderly individuals participated in this cross-sectional study. The timed 180° turn test was administered along with other measures of stroke-specific impairment. Results. The timed 180° turn test demonstrated excellent intrarater, interrater, and test-retest reliability in individuals with hemiplegia from chronic stroke. The timed 180° turn test (times significantly correlated with the Fugl-Meyer Assessment of the Lower Extremities (FMA-LE, affected ankle plantar flexion strength, the 5-Times-Sit-To-Stand test, the Berg Balance Scale (BBS, and the Timed Up and Go (TUG test. Conclusion. The timed 180° turn test is a reliable clinical tool to assess the turning ability of subjects with hemiplegia from chronic stroke.

First impressions and beyond: marketing your practice in touch points--Part II.

Science.gov (United States)

Bisera, Cheryl

2012-01-01

When calling in a marketing expert to boost a practice's numbers, administrators and providers are usually looking for external marketing strategies--ways to attract new patients to the practice. However, one of the most important, yet often overlooked, elements to successfully marketing a practice is the very important work of retaining current patients and turning them into enthusiastic referrers. When new patients are simply filling the place of previous patients that have moved on, you are not building solid practice growth. You can create an atmosphere of loyal referring patients by providing positive touch points that fulfill the needs of your patients. This article will cover touch points that occur before a patient has chosen your practice. Laying the groundwork for positive touch points will give your marketing efforts a snowball effect, build growth, and deliver the most bang for your marketing bucks.

Experience of the Surveyor Mobile robot at Nine Mile Point

International Nuclear Information System (INIS)

Kniazewycz, B.G.; Irving, T.L.

1987-01-01

A successful test and evaluation program was recently conducted on a commercial-ready, wireless, remotely operated surveillance system for use in nuclear power plants. This evaluation of the Surveyor Mobile Surveillance System took place at Niagara Mohawk Power Corporation's (NMPC) Nine Mile Point (NMP) Nuclear Power Station. The remotely operated vehicles measures radiation, temperature and relative humidity and provides optical inspection capability. The vehicle is readily maneuvered through 36 inch wide passageways and labyrinth entries and can climb stairs, negotiating 180 degree turns on stair landings. The Surveyor systems consists of a Supervisory Control Station and a rugged, remotely operated, battery-powered vehicle. The Surveyor system is specifically designed to decrease personnel radiation exposure by supplementing the functions of an auxiliary operator or Health Physics Technician to perform periodic component inspections inside particular areas within a nuclear power plant. The purpose of this presentation is to describe the recent efforts, achievements and experiences of the personnel at NMP Unit 1. In particular, this will address the test and evaluation program for the Surveyor Mobile Surveillance Robot

In silico platform for predicting and initiating β-turns in a protein at desired locations.

Science.gov (United States)

Singh, Harinder; Singh, Sandeep; Raghava, Gajendra P S

2015-05-01

Numerous studies have been performed for analysis and prediction of β-turns in a protein. This study focuses on analyzing, predicting, and designing of β-turns to understand the preference of amino acids in β-turn formation. We analyzed around 20,000 PDB chains to understand the preference of residues or pair of residues at different positions in β-turns. Based on the results, a propensity-based method has been developed for predicting β-turns with an accuracy of 82%. We introduced a new approach entitled "Turn level prediction method," which predicts the complete β-turn rather than focusing on the residues in a β-turn. Finally, we developed BetaTPred3, a Random forest based method for predicting β-turns by utilizing various features of four residues present in β-turns. The BetaTPred3 achieved an accuracy of 79% with 0.51 MCC that is comparable or better than existing methods on BT426 dataset. Additionally, models were developed to predict β-turn types with better performance than other methods available in the literature. In order to improve the quality of prediction of turns, we developed prediction models on a large and latest dataset of 6376 nonredundant protein chains. Based on this study, a web server has been developed for prediction of β-turns and their types in proteins. This web server also predicts minimum number of mutations required to initiate or break a β-turn in a protein at specified location of a protein. © 2015 Wiley Periodicals, Inc.

Hg{sup 2+}-induced self-assembly of a naphthalimide derivative by selective 'turn-on' monomer/excimer emissions

Energy Technology Data Exchange (ETDEWEB)

Wanichacheva, Nantanit, E-mail: wanichacheva.nantanit@gmail.com [Department of Chemistry, Faculty of Science, Silpakorn University, Nakorn Pathom 73000 (Thailand); Prapawattanapol, Narupon [Petrochemistry and Polymer Science Program, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Sanghiran Lee, Vannajan [Department of Chemistry, Faculty of Science, University of Malaya 50603, Kuala Lumpur (Malaysia); Grudpan, Kate [Department of Chemistry, Center for Innovation in Chemistry, Faculty of Science, and Center of Excellence in Innovation for Analytical Science and Technology, Chiang Mai 50200 (Thailand); Petsom, Amorn [Research Centre for Bioorganic Chemistry, Department of Chemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand)

2013-02-15

A novel fluorescent sensor bearing two naphthalimide fluorophores based on 2-(3-(2-aminoethylsulfanyl)propylsulfanyl)ethanamine, 1, was readily synthesized for the recognition of Hg{sup 2+}. The sensitive and selective binding behaviors of 1 were investigated by fluorescence spectroscopy. Sensor 1 selectively binds Hg{sup 2+} by exhibiting OFF-ON fluorescence enhancement behaviors of the monomer and excimer bands. The sensor provides excellent Hg{sup 2+}-selectivity in the presence of high concentrations of competitive ions, particularly Cu{sup 2+} and Pb{sup 2+} as well as Na{sup +}, K{sup +}, Mn{sup 2+}, Cd{sup 2+}, Ni{sup 2+}, Ca{sup 2+}, Li{sup +}, Zn{sup 2+} and Co{sup 2+}, with an available detection limit of 2.1 Multiplication-Sign 10{sup -7} M or 42 ppb. - Highlights: Black-Right-Pointing-Pointer Multidentate sulfide-containing ligand bounded to naphthalimide as new Hg{sup 2+} sensor. Black-Right-Pointing-Pointer Sensor is prepared by a straightforward two-step synthesis. Black-Right-Pointing-Pointer Sensor shows high sensitivity and selectivity to Hg{sup 2+} with detection limit of 42 ppb. Black-Right-Pointing-Pointer Hg{sup 2+}-binding is indicated by fluorescence enhancement Black-Right-Pointing-Pointer Sensor 'turns-on' both monomeric and excimer emissions by the addition of Hg{sup 2+}.

How changes in top water bother big turning packs of up-going wet air

Science.gov (United States)

Wood, K.

2017-12-01

Big turning packs of up-going wet air form near areas of warm water at the top of big bodies of water. After these turning packs form, they usually get stronger if the top water stays warm. If the top water becomes less warm, the turning packs usually get less strong. Other things can change how strong a turning pack gets, like how wet the air around it is and if that air moves faster higher up than lower down. When these turning packs hit land, their rain and winds can hurt people and the stuff they own, especially if the turning pack is really strong. But it's hard to know how much stronger or less strong it will become before it hits land. Warm top water gives a turning pack of up-going wet air a lot of power, but cool top water doesn't, so we need to know how warm the top water is. Because I can't go into every turning pack myself, flying computers in outer space tell me what the top water is doing. I look at the top water near turning packs that get strong and see how it's different from the top water near those that get less strong. Top water that changes from warm to cool in a small area bothers a turning pack of up-going wet air, which then gets less strong. If we see these top water changes ahead of time, that might help us know what a turning pack will do before it gets close to land.

Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

Directory of Open Access Journals (Sweden)

Santiago Veiga

2013-12-01

Full Text Available The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity.

Prediction of beta-turns in proteins using the first-order Markov models.

Science.gov (United States)

Lin, Thy-Hou; Wang, Ging-Ming; Wang, Yen-Tseng

2002-01-01

We present a method based on the first-order Markov models for predicting simple beta-turns and loops containing multiple turns in proteins. Sequences of 338 proteins in a database are divided using the published turn criteria into the following three regions, namely, the turn, the boundary, and the nonturn ones. A transition probability matrix is constructed for either the turn or the nonturn region using the weighted transition probabilities computed for dipeptides identified from each region. There are two such matrices constructed for the boundary region since the transition probabilities for dipeptides immediately preceding or following a turn are different. The window used for scanning a protein sequence from amino (N-) to carboxyl (C-) terminal is a hexapeptide since the transition probability computed for a turn tetrapeptide is capped at both the N- and C- termini with a boundary transition probability indexed respectively from the two boundary transition matrices. A sum of the averaged product of the transition probabilities of all the hexapeptides involving each residue is computed. This is then weighted with a probability computed from assuming that all the hexapeptides are from the nonturn region to give the final prediction quantity. Both simple beta-turns and loops containing multiple turns in a protein are then identified by the rising of the prediction quantity computed. The performance of the prediction scheme or the percentage (%) of correct prediction is evaluated through computation of Matthews correlation coefficients for each protein predicted. It is found that the prediction method is capable of giving prediction results with better correlation between the percent of correct prediction and the Matthews correlation coefficients for a group of test proteins as compared with those predicted using some secondary structural prediction methods. The prediction accuracy for about 40% of proteins in the database or 50% of proteins in the test set is

Influence of slope steepness, foot position and turn phase on plantar pressure distribution during giant slalom alpine ski racing.

Directory of Open Access Journals (Sweden)

Thomas Falda-Buscaiot

Full Text Available The purpose of this study was to investigate the evolution of ground reaction force during alpine skiing turns. Specifically, this study investigated how turn phases and slope steepness affected the whole foot normal GRF pattern while performing giant slalom turns in a race-like setting. Moreover, the outside foot was divided into different plantar regions to see whether those parameters affected the plantar pressure distribution. Eleven skiers performed one giant slalom course at race intensity. Runs were recorded synchronously using a video camera in the frontal plane and pressure insoles under both feet's plantar surface. Turns were divided according to kinematic criteria into four consecutive phases: initiation, steering1, steering2 and completion; both steering phases being separated by the gate passage. Component of the averaged Ground Reaction Force normal to the ski's surface([Formula: see text], /BW, and Pressure Time Integral relative to the entire foot surface (relPTI, % parameters were calculated for each turn phases based on plantar pressure data. Results indicated that [Formula: see text] under the total foot surface differed significantly depending on the slope (higher in steep sections vs. flat sections, and the turn phase (higher during steering2 vs. three other phases, although such modifications were observable only on the outside foot. Moreover, [Formula: see text] under the outside foot was significantly greater than under the inside foot.RelPTI under different foot regions of the outside foot revealed a global shift from forefoot loading during initiation phase, toward heel loading during steering2 phase, but this was dependent on the slope studied. These results suggest a differentiated role played by each foot in alpine skiing turns: the outside foot has an active role in the turning process, while the inside foot may only play a role in stability.

The Apparent Lack of Lorentz Invariance in Zero-Point Fields with Truncated Spectra

Directory of Open Access Journals (Sweden)

Daywitt W. C.

2009-01-01

Full Text Available The integrals that describe the expectation values of the zero-point quantum-field-theoretic vacuum state are semi-infinite, as are the integrals for the stochastic electrodynamic vacuum. The unbounded upper limit to these integrals leads in turn to infinite energy densities and renormalization masses. A number of models have been put forward to truncate the integrals so that these densities and masses are finite. Unfortunately the truncation apparently destroys the Lorentz invariance of the integrals. This note argues that the integrals are naturally truncated by the graininess of the negative-energy Planck vacuum state from which the zero-point vacuum arises, and are thus automatically Lorentz invariant.

Relationship Between Magnitude of Applied Spin Recovery Moment and Ensuing Number of Recovery Turns

Science.gov (United States)

Anglin, Ernie L.

1967-01-01

An analytical study has been made to investigate the relationship between the magnitude of the applied spin recovery moment and the ensuing number of turns made during recovery from a developed spin with a view toward determining how to interpolate or extrapolate spin recovery results with regard to determining the amount of control required for a satisfactory recovery. Five configurations were used which are considered to be representative of modern airplanes: a delta-wing fighter, a stub-wing research vehicle, a boostglide configuration, a supersonic trainer, and a sweptback-wing fighter. The results obtained indicate that there is a direct relationship between the magnitude of the applied spin recovery moments and the ensuing number of recovery turns made and that this relationship can be expressed in either simple multiplicative or exponential form. Either type of relationship was adequate for interpolating or extrapolating to predict turns required for recovery with satisfactory accuracy for configurations having relatively steady recovery motions. Any two recoveries from the same developed spin condition can be used as a basis for the predicted results provided these recoveries are obtained with the same ratio of recovery control deflections. No such predictive method can be expected to give satisfactory results for oscillatory recoveries.

Casimir Energy of the Nambu-Goto String with Gauss-Bonnet Term and Point-Like Masses at the Ends

Science.gov (United States)

Hadasz, Leszek

1999-09-01

We calculate the Casimir energy of the rotating Nambu-Goto string with the Gauss-Bonnet term in the action and point-like masses at the ends. This energy turns out to be negative for every values of the parameters of the model.

Casimir Energy of the Nambu-Goto String with Gauss-Bonnet Term and Point-Like Masses at the Ends

International Nuclear Information System (INIS)

Hadasz, L.

1999-01-01

We calculate the Casimir energy of the rotating Nambu-Goto string with the Gauss-Bonnet term in the action and point-like masses at the ends. This energy turns out to be negative for every values of the parameters of the model. (author)

Treatment of uranium turning with the controllable oxidizing process

International Nuclear Information System (INIS)

Shen Bingyi; Zhang Yonggang; Zhen Huikuan

1989-02-01

The concept, procedure and safety measures of the controllable oxidizing for uranium turning is described. The feasibility study on technological process has been made. The process provided several advantages such as: simplicity of operation, no pollution environment, safety, high efficiency and low energy consumption. The process can yield nuclear pure uranium dioxide under making no use of a great number of chemical reagent. It may supply raw material for fluoration and provide a simply method of treatment for safe store of uranium turning

Possibilities of Application of High Pressure Jet Assisted Machining in Hard Turning with Carbide Tools

Directory of Open Access Journals (Sweden)

G. Globočki Lakić

2017-06-01

Full Text Available High Pressure Jet Assisted Machining (HPJAM in turning is a hybrid machining method in which a high pressure jet of cooling and lubrication fluid, under high pressure (50 MPa, leads to the zone between the cutting tool edge and workpiece. An experimental study was performed to investigate the capabilities of conventional and high pressure cooling (HPC in the turning of hard-to-machine materials: hard-chromed and surface hardened steel Ck45 (58 HRc and hardened bearing steel 100Cr6 (62 HRc. Machining experiments were performed using coated carbide tools and highly cutting speed. Experimental measurements were performed for different input process parameters. The cooling capabilities are compared by monitoring of tool wear, tool life, cooling efficiency, and surface roughness. Connection between the tool wear and surface roughness is established. Experimental research show that the hard turning with carbide cutting tools and HP supply CLF provides numerous advantages from the techno-economic aspect: greater productivity, reduce of temperature in the cutting zone, improved control chip formation, extended tool life, low intensity of tool wear, surface roughness in acceptable limits, significant reduce of production costs related to the CLF.

Turning Technology into Business Using University Patents

NARCIS (Netherlands)

Hartmann, L.

2014-01-01

We present an education paradigm that stimulates innovation and entrepreneurship through a master's-level university course: "Turning Technology into Business". The course was specifically designed to connect technological research with education using patented technologies developed at the research

Laser Dew-Point Hygrometer

Science.gov (United States)

Matsumoto, Shigeaki; Toyooka, Satoru

1995-01-01

A rough-surface-type automatic dew-point hygrometer was developed using a laser diode and an optical fiber cable. A gold plate with 0.8 µ m average surface roughness was used as a surface for deposition of dew to facilitate dew deposition and prevent supersaturation of water vapor at the dew point. It was shown experimentally that the quantity of dew deposited can be controlled to be constant at any predetermined level, and is independent of the dew point to be measured. The dew points were measured in the range from -15° C to 54° C in which the temperature ranged from 0° C to 60° C. The measurement error of the dew point was ±0.5° C which was equal to below ±2% in relative humidity in the above dew-point range.

Towards a Practice Turn in EU Studies

DEFF Research Database (Denmark)

Adler-Nissen, Rebecca

2016-01-01

This article explores how practice theory can be recruited for the study of European integration. New generations of EU researchers are fascinated by the prospect of leaving the armchair and studying the people and artefacts that make the EU on an everyday level. This article surveys key practice......-oriented, anthropological and micro-sociological studies of the EU and European integration and shows how their findings challenge more traditional understandings of the dynamics of European integration. Moving beyond a stock-taking, the article distinguishes between ‘order- ing’ and ‘disordering’ practices and explores...... the potential of a practice turn in EU studies for both theory (overcoming dualism, replacing substantialism with processualism and rethinking power) and methods (including unstructured interviews, fieldwork and participant observation). A practice turn will force us to rethink core assumptions about the EU...

Turning Perspective in Photoelectrocatalytic Cells for Solar Fuels.

Science.gov (United States)

Perathoner, Siglinda; Centi, Gabriele; Su, Dangsheng

2016-02-19

The development of new devices for the use and storage of solar energy is a key step to enable a new sustainable energy scenario. The route for direct solar-to-chemical energy transformation, especially to produce liquid fuels, represents a necessary element to realize transition from the actual energy infrastructure. Photoelectrocatalytic (PECa) devices for the production of solar fuels are a key element to enable this sustainable scenario. The development of PECa devices and related materials is of increasing scientific and applied interest. This concept paper introduces the need to turn the viewpoint of research in terms of PECa cell design and related materials with respect to mainstream activities in the field of artificial photosynthesis and leaves. As an example of a new possible direction, the concept of electrolyte-less cell design for PECa cells to produce solar fuels by reduction of CO2 is presented. The fundamental and applied development of new materials and electrodes for these cells should proceed fully integrated with PECa cell design and systematic analysis. A new possible approach to develop semiconductors with improved performances by using visible light is also shortly presented. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Correlations between boiling points and relative retention data for hydrocarbons

NARCIS (Netherlands)

Sojak, L.; Krupcik, J.; Rijks, J.A.

1974-01-01

An equation correlating retention indices, boiling points and activity coefficients is proposed. The equation can be applied not only to homologous series, but also to different classes of hydrocarbons.

Notes on the Spatial Turn

Directory of Open Access Journals (Sweden)

Stipe Grgas

2012-06-01

Full Text Available On the basis of ever-mounting evidence, amongst which is the “zone” problematic of the Zadar conference that occassioned these notes, it can be concluded that the spatial turn has insinuated itself as an all-pervading heuristic tool throughout the humanities and the social sciences. The extent to which space and spatiality have usurped the central stage in the various branches of reasearch can be gauged by admonishments that what we are witnessing is a new fundamentalism that has simply inverted the terms of the dualism of time and space (May and Thrift 2001: “Introduction”. According to Michael Dear the sway of space is manifested in multifold ways: in the ubiquity of spatial analysis in social theories and practices; in the explosion of publications devoted to the exploration of the interface of the social and the spatial; in the reintegration of human geography into various domains of knowledge; in the focus given to difference and the consequent diversification of theoretical and empirical practices; in a theoretically informed exploration of the relation between geographical knowledge and social action; and, finally, in the unprecedented proliferation of research agendas and publications pertaining to these isuuses (Dear 2001: 24. Two recent collections of papers are indicative of the ubiquity of spatial issues in scholarly work.

Wingbeat kinematics and motor control of yaw turns in Anna's hummingbirds (Calypte anna).

Science.gov (United States)

Altshuler, Douglas L; Quicazán-Rubio, Elsa M; Segre, Paolo S; Middleton, Kevin M

2012-12-01

The biomechanical and neuromuscular mechanisms used by different animals to generate turns in flight are highly variable. Body size and body plan exert some influence, e.g. birds typically roll their body to orient forces generated by the wings whereas insects are capable of turning via left-right wingbeat asymmetries. Turns are also relatively brief and have low repeatability, with almost every wingbeat serving a different function throughout the change in heading. Here we present an analysis of Anna's hummingbirds (Calypte anna) as they fed continuously from an artificial feeder revolving around the outside of the animal. This setup allowed for examination of sustained changes in yaw without requiring any corresponding changes in pitch, roll or body position. Hummingbirds sustained yaw turns by expanding the wing stroke amplitude of the outer wing during the downstroke and by altering the deviation of the wingtip path during both downstroke and upstroke. The latter led to a shift in the inner-outer stroke plane angle during the upstroke and shifts in the elevation of the stroke plane and in the deviation of the wingtip path during both strokes. These features are generally more similar to how insects, as opposed to birds, turn. However, time series analysis also revealed considerable stroke-to-stroke variation. Changes in the stroke amplitude and the wingtip velocity were highly cross-correlated, as were changes in the stroke deviation and the elevation of the stroke plane. As was the case for wingbeat kinematics, electromyogram recordings from pectoral and wing muscles were highly variable, but no correlations were found between these two features of motor control. The high variability of both kinematic and muscle activation features indicates a high level of wingbeat-to-wingbeat adjustments during sustained yaw. The activation timing of the muscles was more repeatable than the activation intensity, which suggests that the former may be constrained by harmonic

Is an increased elderly population related to decreased CO2 emissions from road transportation?