WorldWideScience

Sample records for related materials collected

  1. Bibliography of documents and related materials collected for the Hawaii Geothermal Project Environmental Impact Statement

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, F.M.; Boston, C.R.; Burns, J.C.; Hagan, C.W. Jr.; Saulsbury, J.W.; Wolfe, A.K.

    1995-03-01

    This report has been prepared to make available and archive information developed during preparation of the Environmental Impact Statement for Phases 3 and 4 of the Hawaii Geothermal Project as defined by the state of Hawaii in its April 1989 proposal to Congress. On May 17, 1994, the USDOE published a notice in the Federal Register withdrawing its Notice of Intent of February 14, 1992, to prepare the HGP EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This report provides a bibliography of documents, published papers, and other reference materials that were obtained or used. The report provides citations for approximately 642 documents, published papers, and other reference materials that were gathered to describe the potentially affected environment on the islands of Hawaii, Maui, and Oahu. The listing also does not include all the reference materials developed by support subcontractors and cooperating agencies who participated in the project. This listing does not include correspondence or other types of personal communications. The documents listed in this report can be obtained from original sources or libraries.

  2. Determination of yield related traits of sesame genotypes selected from world collection and mutant material

    International Nuclear Information System (INIS)

    Silme, R. S.; Cagirgan, M. I.

    2009-01-01

    Sesame (Sesamum indicum L.) is an important plant of Turkey that secondary gen center and very used of food industry's a lot of area. Mutation breeding of sesame research continued coordinately with IAEA since 1993. it is aimed in these breeding programmes to improve lines that have dehiscent capsule, determinate growth and resistance to wilting traits. This study was conducted in Antalya City, at Akdeniz University Agricultural Faculty experiment fields under second crop conditions in 2007. At this study, 19 genotypes selected from world sesame collection, 4 mutant genotypes and 2 local cultivars were sown. The experiments were conducted according to Complete Randomized Block Design with three replications. It was found that first flowering date varied between 35 to 45 days, 50% flowering date from 39 to 54 days, last flowering date from 63 to 88 days, first capsule date from 42 to 51 days, first capsule height from 44 to 116 cm, plant height from 102 to 177 cm, number of branch per plant from 0.1 to 2.7, number of pod per plant from 28 to 63, number of seeds in capsule 2.3-4.3 g, 1000 seed weight ranged from 2.3 to 4.3 g, seed yield per da from 18 to 77 kg. The highest yield per da (77 kg/da) was obtained from mutant genotype, wt-5.

  3. Collecting and Interpreting Qualitative Materials. Third Edition

    Science.gov (United States)

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book is the third volume of the paperback versions of "The SAGE Handbook of Qualitative Research, Third Edition." This portion of the handbook considers the tasks of collecting, analyzing, and interpreting empirical materials, and comprises the Handbook's Parts IV ("Methods of Collecting and Analyzing Empirical Materials") and V ("The Art and…

  4. Biomimetic water-collecting materials inspired by nature.

    Science.gov (United States)

    Zhu, Hai; Guo, Zhiguang; Liu, Weimin

    2016-03-11

    Nowadays, water shortage is a severe issue all over the world, especially in some arid and undeveloped areas. Interestingly, a variety of natural creatures can collect water from fog, which can provide a source of inspiration to develop novel and functional water-collecting materials. Recently, as an increasingly hot research topic, bioinspired materials with the water collection ability have captured vast scientific attention in both practical applications and fundamental research studies. In this review, we summarize the mechanisms of water collection in various natural creatures and present the fabrications, functions, applications, and new developments of bioinspired materials in recent years. The theoretical basis related to the phenomenon of water collection containing wetting behaviors and water droplet transportations is described in the beginning, i.e., the Young's equation, Wenzel model, Cassie model, surface energy gradient model and Laplace pressure equation. Then, the water collection mechanisms of three typical and widely researched natural animals and plants are discussed and their corresponding bioinspired materials are simultaneously detailed, which are cactus, spider, and desert beetles, respectively. This is followed by introducing another eight animals and plants (butterfly, shore birds, wheat awns, green bristlegrass, the Cotula fallax plant, Namib grass, green tree frogs and Australian desert lizards) that are rarely reported, exhibiting water collection properties or similar water droplet transportation. Finally, conclusions and outlook concerning the future development of bioinspired fog-collecting materials are presented.

  5. Technology for collecting and analyzing relational data

    Directory of Open Access Journals (Sweden)

    E. N. Fedorova

    2016-01-01

    Full Text Available Purpose of the study. The scientific and educational organizations use traditionally e-mail with Microsoft Excel spreadsheets and Microsoft Word documents for operational data collection. The disadvantages of this approach include the lack of control of the correctness of the data input, the complexity of processing the information received due to non-relational data model, etc. There are online services that enable to organize the collection of data in a relational form. The disadvantages of these systems are: the absence of thesaurus support; a limited set of elements of data input control; the limited control the operation of the input form; most of the systems is shareware, etc. Thus, it is required the development of Internet data collection and analysis technology, which should allow to identify quickly model the data collected and automatically implement data collection in accordance with this model.Materials and methods. The article describes the technology developed and tested for operational data collection and analysis using "Faramant" system. System operation "Faramant" is based on a model document, which includes three components: description of the data structure; visualization; logic of form work. All stages of the technology are performed by the user using the browser. The main stage of the proposed technology is the definition of the data model as a set of relational tables. To create a table within the system it’s required to determine the name and a list of fields. For each field, you must specify its name and use the control to the data input and logic of his work. Controls are used to organize the correct input data depending on the data type. Based on a model system "Faramant" automatically creates a filling form, using which users can enter information. To change the form visualization, you can use the form template. The data can be viewed page by page in a table. For table rows, you can apply different filters. To

  6. Materials related to the elite of the nobility of Bessarabia – the families of Cantacuzin and Krupensky in the collections of the National Museum of the History of Moldova

    Directory of Open Access Journals (Sweden)

    Vera Serjant

    2017-12-01

    Full Text Available The aim of the museum is to collect and store various objects. It gives the evidences of the past the possibility of "surviving” to the present day. At the same time, the museum should present these materials to the attention of the public, showing the origins of civilization, life in all its complexity, thereby helping the visitor to better understand the world with its secrets. Considering the role of the museum heritage in the development of society, we carried out a study of the collections of the National Museum of the History of Moldova related to the history of the Bessarabian noble families. The Cantacuzins and the Krupensky are two families, belonging to the elite of the nobility and having a centuries-old history. In our study we are considering the Bessarabian branch of these families. From 1991 to 2005 the National Museum of History of Moldova accepted as a gift and purchased important materials reflecting the history of the Cantacuzin family. These materials were collected by Irina Cantacuzin, the wife of the last descendant of the Bessarabian Cantacuzins, Pavel (1902-1992. Of particular value is the collection of documents and photographs of the family of Pavel Cantacuzin, collected and transferred to the museum by A. Krakan in 1993. It consists of about 50 units, among which 36 are originals and copies of photographs relating to the period from the 19th century to 1990. It is this collection that contains a number of photographs with representatives of the family of Krupensky, who were related to the Cantacuzins. In 2001, the NMHM received another collection of documents, photographs and other materials related to the Bessarabian Prince Pavel Cantacuzin. It reflects his life and activities during the period of imprisonment and after rehabilitation. The museum collections hold several things and household items belonging to these families. Museum collections are a valuable historical source. Their research and use in exhibitions

  7. Collective Psychological Ownership and Intergroup Relations

    NARCIS (Netherlands)

    Verkuyten, Maykel; Martinovic, Borja

    2017-01-01

    Whereas much social psychological research has studied the in-group and out-group implications of social categorization and collective identity (“we”), little research has examined the nature and relevance of collective psychological ownership (“ours”) for intergroup relations. We make a case for

  8. Collective Psychological Ownership and Intergroup Relations.

    Science.gov (United States)

    Verkuyten, Maykel; Martinovic, Borja

    2017-11-01

    Whereas much social psychological research has studied the in-group and out-group implications of social categorization and collective identity ("we"), little research has examined the nature and relevance of collective psychological ownership ("ours") for intergroup relations. We make a case for considering collective psychological ownership as an important source of intergroup tensions. We do so by integrating theory and research from various social sciences, and we draw out implications for future social psychological research on intergroup relations. We discuss collective psychological ownership in relation to the psychology of possessions, marking behavior, intergroup threats, outgroup exclusion, and in-group responsibility. We suggest that the social psychological processes discussed apply to a range of ownership objects (territory, buildings, cultural artifacts) and various intergroup settings, including international, national, and local contexts, and in organizations and communities. We conclude by providing directions for future research in different intergroup contexts.

  9. 76 FR 28034 - Labor-Management Relations Information Collection Requests

    Science.gov (United States)

    2011-05-13

    ... FEDERAL MEDIATION AND CONCILIATION SERVICE Labor-Management Relations Information Collection... of Subjects Labor-management relations, employee management relations, and Information collection... opportunity to comment on the following information collection requests. The information collection requests...

  10. Materialising digital collecting: An extended view of digital materiality

    OpenAIRE

    Mardon, Rebecca; Belk, Russell

    2018-01-01

    If digital objects are abundant and ubiquitous, why should consumers pay for, much less collect them? The qualities of digital code present numerous challenges for collecting, yet digital collecting can and does occur. We explore the role of companies in constructing digital consumption objects that encourage and support collecting behaviours, identifying material configuration techniques that materialise these objects as elusive and authentic. Such techniques, we argue, may facilitate those ...

  11. Collective management of copyright and related rights

    CERN Document Server

    2010-01-01

    In the course of the last decade, collective management organizations (CMOs) have become the nerve centres of copyright licensing in virtually every country. Their expertise and knowledge of copyright law and management have proven essential to make copyright work in the digital age. This book, an extensively revised and updated edition of the only major work on the legal status of CMOs, offers an indepth analysis of the various operating CMO models, their rights and obligations vis-a-vis both users and members, acquisition of legal authority to license, and (most important) the rights to license digital uses of protected material and build (or improve current) information systems to deal with ever more complex rights management and licensing tasks. All the chapters have been updated since the 2005 edition, and a new chapter on multiterritorial licensing has been added. Factors considered include the following: * role of 'families' such as the International Confederation of Societies of Authors and Composers ...

  12. CHAPTER 6. Biomimetic Materials for Efficient Atmospheric Water Collection

    KAUST Repository

    Zhang, Lianbin

    2016-02-23

    Water scarcity is a severe problem in semi-arid desert regions, land-scarce countries and in countries with high levels of economic activity. In these regions, the collection of atmospheric water - for example, fog - is recognized as an important method of providing water. In nature, through millions of year evolution, some animals and plants in many of the arid regions have developed unique and highly efficient systems with delicate microstructures and composition for the purpose of fog collection to survive the harsh conditions. With the unique ability of fog collection, these creatures could readily cope with insufficient access to fresh water or lack of precipitation. These natural examples have inspired the design and fabrication of artificial fog collection materials and devices. In this chapter, we will first introduce some natural examples for their unique fog collection capability, and then give some examples of the bioinspired materials and devices that are fabricated artificially to mimic these natural creatures for the purpose of fog collection. We believe that the biomimetic strategy is one of the most promising routes for the design and fabrication of functional materials and devices for the solution of the global water crisis.

  13. Collective issues related to B-factories

    International Nuclear Information System (INIS)

    Pestrikov, D.V.

    1993-02-01

    This report reviews the limitations on the performance of the planned B- and Φ-factories due to the collective interactions of stored bunches. Together with the traditional revision of the limitations due to the single- and multi-bunch interaction with surrounding electrodes, we briefly discuss in this report the limitations on the performance due to collective beam-beam instabilities of colliding beams and instabilities due to the collective interaction of beams with the ions. (author)

  14. Device for collecting chemical compounds and related methods

    Science.gov (United States)

    Scott, Jill R.; Groenewold, Gary S.; Rae, Catherine

    2013-01-01

    A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from the fixed surfaces so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

  15. Physical Hypermedia: Organising Collections of Mixed Physical and Digital Material

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kristensen, Jannie Friis; Ørbæk, Peter

    2003-01-01

    This paper introduces the notion of physical hypermedia, addressing the problem of organizing material in mixed digital and physical environments. Based on empirical studies, we propose concepts for collectional actions and meta-data actions, and present prototypes combining principles from...... augmented reality and hypermedia to support organization of mixtures of digital and physical materials. Our prototype of a physical hypermedia system is running on an augmented architect's desk and digital walls utilizing Radio Frequency Identifier (RFID) tags as well as visual tags tracked by cameras....... It allows users to tag physical materials, and have these tracked by readers (antennas) that may become pervasive in our work environments. In the physical hypermedia system, we work with three categories of RFID tags: simple object tags, collectional tags, and tooltags invoking operations such as grouping...

  16. The Materiality of Digital Collections: Theoretical and Historical Perspectives

    Science.gov (United States)

    Manoff, Marlene

    2006-01-01

    Digital and textual objects are coming under a new kind of scrutiny as scholars are becoming more interested in physical artifacts and their relation to their social and cultural environment. This study of material culture suggests a need to explore the nature of digital materiality, as well as the broader historical context in which electronic…

  17. Nonlinear constitutive relations for anisotropic elastic materials

    Science.gov (United States)

    Sokolova, Marina; Khristich, Dmitrii

    2018-03-01

    A general approach to constructing of nonlinear variants of connection between stresses and strains in anisotropic materials with different types of symmetry of properties is considered. This approach is based on the concept of elastic proper subspaces of anisotropic materials introduced in the mechanics of solids by J. Rychlewski and on the particular postulate of isotropy proposed by A. A. Il’yushin. The generalization of the particular postulate on the case of nonlinear anisotropic materials is formulated. Systems of invariants of deformations as lengths of projections of the strain vector into proper subspaces are developed. Some variants of nonlinear constitutive relations for anisotropic materials are offered. The analysis of these relations from the point of view of their satisfaction to general and limit forms of generalization of partial isotropy postulate on anisotropic materials is performed. The relations for particular cases of anisotropy are written.

  18. Relative consequences of transporting hazardous materials

    International Nuclear Information System (INIS)

    Fullwood, R.R.; Rhyne, W.R.; Simmons, J.A.; Reese, R.T.

    1980-01-01

    The objective of this paper is to discuss methods under study at Transportation Technology Center to develop a perspective on how technical measures of hazard and risk relate to perception of hazards, harm, and risks associated with transporting hazardous materials. This paper is concerned with two major aspects of the relative hazards problem. The first aspect is the analyses of the possible effects associated with exposure to hazardous materials as contained in the following two parts: outlines of possible problems and controversies that could be encountered in the evaluation and comparisons of hazards and risks; and description of the various measures of harm (hazards or dangers) and subsequent comparisons thereof. The second aspect of this paper leads into a presentation of the results of a study which had the following purposes: to develop analytical techniques for a consistent treatment of the phenomenology of the consequences of a release of hazardous materials; to reduce the number of variables in the consequence analyses by development of transportation accident scenarios which have the same meteorological conditions, demography, traffic and population densities, geographical features and other appropriate conditions and to develop consistent methods for presenting the results of studies and analyses that describe the phenomenology and compare hazards. The results of the study are intended to provide a bridge between analytical certainty and perception of the hazards involved. Understanding the differences in perception of hazards resulting from transport of various hazardous materials is fraught with difficulties in isolating the qualitative and quantitative features of the problem. By relating the quantitative impacts of material hazards under identical conditions, it is hoped that the perceived differences in material hazards can be delineated and evaluated

  19. 76 FR 43331 - Labor-Management Relations Information Collection Requests

    Science.gov (United States)

    2011-07-20

    ... FEDERAL MEDIATION AND CONCILIATION SERVICE Labor-Management Relations Information Collection... the following public information collection requests (ICR) to the Office of Management and Budget (OMB... information collection requests are FMCS forms: Arbitrator's Report and Fee Statement (Agency Form R-19...

  20. 77 FR 56842 - Labor-Management Relations Information Collection Requests

    Science.gov (United States)

    2012-09-14

    ... FEDERAL MEDIATION AND CONCILIATION SERVICE Labor-Management Relations Information Collection... the following public information collection request (ICR) to the Office of Management and Budget (OMB... information collection request is the Notice to Mediation Agencies (Agency Form F-7), OMB control number 3076...

  1. Economic botany collections: A source of material evidence for exploring historical changes in Chinese medicinal materials.

    Science.gov (United States)

    Brand, Eric; Leon, Christine; Nesbitt, Mark; Guo, Ping; Huang, Ran; Chen, Hubiao; Liang, Li; Zhao, Zhongzhen

    2017-03-22

    Many Chinese medicinal materials (CMMs) have changed over centuries of use, particularly in terms of their botanical identity and processing methods. In some cases, these changes have important implications for safety and efficacy in modern clinical practice. As most previous research has focused on clarifying the evolution of CMMs by analyzing traditional Chinese materia medica ("bencao") literature, assessments of historical collections are needed to validate these conclusions with material evidence. Historical collections of Chinese medicines reveal the market materials in circulation at a given moment in time, and represent an underexploited resource for analyzing the evolution of Chinese herbal medicines. This study compares specimens from a rare collection of CMMs from the 1920s with contemporary market materials; by highlighting examples of changes in botanical identity and processing that remain relevant for safe clinical practice in the modern era, this work aims to stimulate further research into previously unexplored historical collections of Chinese medicines. 620 specimens of CMMs that were collected from Chinese pharmacies in the Malay peninsula in the 1920s were examined macroscopically and compared with current pharmacopoeia specifications and authentic contemporary samples. These historical specimens, which are stored in the UK in the Economic Botany Collections (EBC) of Royal Botanic Gardens Kew, were morphologically examined, photographed, and compared to authentic CMMs stored at the Bank of China (Hong Kong) Chinese Medicines Center at Hong Kong Baptist University, as well as authentic herbarium-vouchered specimens from the Leon Collection (LC) at the Kew EBC. Case studies were selected to illustrate examples of historical changes in botanical identity, used plant parts, and processing methods. This investigation confirmed that confusion due to shared common names and regional variations in the botanical identity of certain CMMs has been a

  2. 78 FR 72151 - Proposed Collection; Comment Request on Information Collection Tools Relating to Qualitative...

    Science.gov (United States)

    2013-12-02

    ... Information Collection Tools Relating to Qualitative Feedback on Agency Service Delivery. AGENCY: Internal...(c)(2)(A)). Currently, the IRS is soliciting comments concerning the collection of qualitative...: Title: Collection of Qualitative Feedback on Agency Service Delivery OMB Number: 1545-NEW. Form Number...

  3. Hayabusa2 Sampler: Collection of Asteroidal Surface Material

    Science.gov (United States)

    Sawada, Hirotaka; Okazaki, Ryuji; Tachibana, Shogo; Sakamoto, Kanako; Takano, Yoshinori; Okamoto, Chisato; Yano, Hajime; Miura, Yayoi; Abe, Masanao; Hasegawa, Sunao; Noguchi, Takaaki

    2017-07-01

    Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe "Hayabusa2" in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350-1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples.

  4. Social comparison, personal relative deprivation, and materialism.

    Science.gov (United States)

    Kim, Hyunji; Callan, Mitchell J; Gheorghiu, Ana I; Matthews, William J

    2017-06-01

    Across five studies, we found consistent evidence for the idea that personal relative deprivation (PRD), which refers to resentment stemming from the belief that one is deprived of deserved outcomes compared to others, uniquely contributes to materialism. In Study 1, self-reports of PRD positively predicted materialistic values over and above socioeconomic status, personal power, self-esteem, and emotional uncertainty. The experience of PRD starts with social comparison, and Studies 2 and 3 found that PRD mediated the positive relation between a tendency to make social comparisons of abilities and materialism. In Study 4, participants who learned that they had less (vs. similar) discretionary income than people like them reported a stronger desire for more money relative to donating more to charity. In Study 5, during a windfall-spending task, participants higher in PRD spent more on things they wanted relative to other spending categories (e.g., paying off debts). © 2016 The Authors. British Journal of Social Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.

  5. Improvements in or relating to refractory materials

    International Nuclear Information System (INIS)

    Peckett, J.W.A.

    1980-01-01

    A process is described for the production of a refractory material which includes heating an intermediate material containing carbon to cause a thermally induced reaction involving carbon in the intermediate material, wherein the intermediate material has been produced by heating a shaped gel precipitated gel, and the carbon in the intermediate material for participating in the thermally induced reaction has been produced from a gelling agent, or a derivative thereof, incorporated in the gel during gel precipitation. As examples, the refractory material may comprise uranium/plutonium oxide, or uranium/plutonium carbide, or thorium/uranium carbide, or tungsten carbide, or tungsten carbide/cobalt metal. (author)

  6. Project Birdseye Aerial Photograph Collection: Digital and Analog Materials

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This collection consists of both analog and digital aerial photographs from Arctic areas in and around Baffin Bay, the Labrador Sea, the Arctic Ocean, the Beaufort...

  7. Relational iterations and emotional activations: towards a radicalization of processuality of collective identities

    Directory of Open Access Journals (Sweden)

    María Martínez

    2018-03-01

    Full Text Available Collective identity has been conceptualized by social movement theories mainly as a definition. In this text, based in feminist theories, I argue that the conceptualization of collective identity as a definition forgets other fundamental dimensions —mainly relations and emotions— and, moreover, limits its processual character. This argument is based on the study of contemporary feminist mobilizations in Spain through a qualitative fieldwork (quasi-biographical interviews, focus groups, participant observations and the analysis of written and graphic materials. The analysis allows the widening of dimensions of collective identities —from definitions to relations and emotions— as well as the radicalization of their processuality by placing the notions of iteration and activation at the heart of the analysis. I offer a theoretical-analytical proposal that understands that collective identities are but partial materializations, always unfinished processes.

  8. Current collective engagement stakeholder strategies for South African labour relations

    Directory of Open Access Journals (Sweden)

    Popi C. Madlala

    2018-05-01

    Full Text Available Orientation: Collective engagement stakeholder strategies are significant for the creation of harmony in the workplace. It is a known fact that the South African (SA labour environment has been dominated by industrial action before and after the 1994 democratic transition. To be precise, the statistics reveals that industrial action has increased and become more destructive post-1994. Purpose: The purpose of this article was to present the current collective engagement stakeholder strategies for South African labour relations. Motivation for the study: The SA mining sector has seen more violent strikes, with a higher number of deaths, injuries, criminal activities, arrests, dismissals and job losses in recent years. This article captures the current mining stakeholder strategies shaping the existing labour relations environment. Research approach, design and method: This is a theoretical article highlighting the recent literature on collective engagement in the mining sector in South Africa. Main findings: This article presents the current labour relations incidents, reflecting the need for more effective collective engagement and stakeholder management strategies. Practical and managerial implications: The current labour relations context has prompted key stakeholders at the National Economic Development and Labour Council (NEDLAC to look specifically at promoting employment, labour market stability, the right to strike, minimising violence through collective bargaining and highlighting the role of the state, reducing vulnerability through social protection and increasing the minimum wage. Contribution or value add: This article adds theoretically to the existing body of knowledge regarding collective engagement and stakeholder strategies in the SA mining sector.

  9. Collective bargaining under the new Labour Relations Act: The ...

    African Journals Online (AJOL)

    2 PHILOSOPHY OF THE NEW ACT. The 1956 Act was premised on a "pluralist" perspective) of the relation- ... However, in view of the Act's ostensible abstentionist approach, interven- tion by the courts in the bargaining ... trade union members but who are, in terms of a collective agreement, nevertheless represented by the ...

  10. Layered zeolite materials and methods related thereto

    Science.gov (United States)

    Tsapatsis, Michael; Maheshwari, Sudeep; Bates, Frank S; Koros, William J

    2013-08-06

    A novel oxide material (MIN-I) comprising YO.sub.2; and X.sub.2O.sub.3, wherein Y is a tetravalent element and X is a trivalent element, wherein X/Y=O or Y/X=30 to 100 is provided. Surprisingly, MIN-I can be reversibly deswollen. MIN-I can further be combined with a polymer to produce a nanocomposite, depolymerized to produce predominantly fully exfoliated layers (MIN-2), and pillared to produce a pillared oxide material (MIN-3), analogous to MCM-36. The materials are useful in a wide range of applications, such as catalysts, thin films, membranes, and coatings.

  11. Materials considerations relative to multibarrier waste isolation

    International Nuclear Information System (INIS)

    McCoy, H.E.; Griess, J.C.

    1981-07-01

    The environmental conditions associated with the storage of radioactive wastes are reviewed, and the corrosion of potential waste containment materials under these conditions is evaluated. The desired service life of about 1000 years is beyond the time period for which existing corrosion data can be extrapolated with certainty; however, titanium alloys seem to offer the most promise. The mechanical requirements for canisters and overpacks are considered and several candidate materials are selected. Designs for a canister and an overpack have been developed, and these are used to estimate the costs for three possible materials of construction

  12. 78 FR 3499 - Proposed Collection; Comment Request on Information Collection Tools Relating to Customer...

    Science.gov (United States)

    2013-01-16

    .... In regard to online services, this feedback will provide insights into customer preferences for... Information Collection Tools Relating to Customer Satisfaction Surveys AGENCY: Internal Revenue Service (IRS... use a data-driven approach to understanding customer satisfaction at the Internal Revenue Service (IRS...

  13. CHAPTER 6. Biomimetic Materials for Efficient Atmospheric Water Collection

    KAUST Repository

    Zhang, Lianbin; Wang, Peng

    2016-01-01

    Water scarcity is a severe problem in semi-arid desert regions, land-scarce countries and in countries with high levels of economic activity. In these regions, the collection of atmospheric water - for example, fog - is recognized as an important

  14. Flexible energetic materials and related methods

    Energy Technology Data Exchange (ETDEWEB)

    Heaps, Ronald J.

    2018-03-06

    Energetic compositions and methods of forming components from the compositions are provided. In one embodiment, a composition includes aluminum, molybdenum trioxide, potassium perchlorate, and a binder. In one embodiment, the binder may include a silicone material. The materials may be mixed with a solvent, such as xylene, de-aired, shaped and cured to provide a self-supporting structure. In one embodiment, one or more reinforcement members may be added to provide additional strength to the structure. For example, a weave or mat of carbon fiber material may be added to the mixture prior to curing. In one embodiment, blade casting techniques may be used to form a structure. In another embodiment, a structure may be formed using 3-dimensional printing techniques.

  15. A guide to archival collections relating to radioactive fallout from nuclear weapon testing

    International Nuclear Information System (INIS)

    Martin, B.W.

    1992-09-01

    This ninth edition of A Guide to Archival Collections Relating to Radioactive Fallout from Nuclear Weapon Testing constitutes History Associates Incorporated's (HAI) final report of its document collection, processing, and declassification efforts for the Nevada Field Office of the Department of Energy. The most significant feature of this edition is the updated HAI collection effort information. We confirmed the accuracy of this information using our screening, processing, and transmittal records. Unlike previous editions, funding limitations prevented us from systematically revising the collection descriptions and point-of-contact information for this final edition. This guide has been prepared by professional historians who have a working knowledge of many of the record collections included in the following pages. In describing materials, they have tried to include enough information so that persons unfamiliar with the complexities of large record systems will be able to determine that nature of the information in, and the quality of, each record collection

  16. Aviation Career Awareness Program [and Related Materials].

    Science.gov (United States)

    Petrie, Edwin T.

    The learning packet focuses on general aviation and is to be used in career awareness programs at the elementary level. It includes a document which presents a group of units on general aviation and its related careers. The units include the following: (1) aircraft manufacturing, (2) instruments and controls, (3) how airplanes fly, (4) flight…

  17. Instructional Materials in Consumer Education: Interpersonal Relations.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck.

    The seven interpersonal relations units in the consumer education guide are: Expressing Satisfaction or Dissatisfaction with Consumer Goods and Services, What to Do in Case of a Financial Crisis, Bridging the Generation Gap, Rebellion, Emotions, Discovering Myself, and Dual Role (homemaker/wage earner). Grade levels of the units, are…

  18. Constitutive relations for nuclear reactor core materials

    International Nuclear Information System (INIS)

    Zaverl, F. Jr.; Lee, D.

    1978-01-01

    A strain rate dependent constitutive equation is proposed which is capable of describing inelastic deformation behavior of anisotropic metals, such as Zircaloys, under complex loading conditions. The salient features of the constitutive equations are that they describe history dependent inelastic deformation behaviour of anisotropic metals under three-dimensional stress states in the presence of fast neutron flux. It is shown that the general form of the constitutive relations is consistent with experimental observations made under both unirradiated and irradiated conditions. The utility of the model is demonstrated by examining the analytical results obtained for a segment of tubing undergoing different loading histories in a reactor. (Auth.)

  19. Study of the collecting electrode material of an extrapolation chamber by Monte Carlo simulation

    International Nuclear Information System (INIS)

    Vedovato, Uly Pita; Santos, William S.; Perini, Ana Paula; Belinato, Walmir

    2017-01-01

    In this work, the influence of different materials of the collecting electrode on the response of an extrapolation ionization chamber, was evaluated. This ionization chamber was simulated with the MCNP-4C Monte Carlo code and the spectrum of a standard diagnostic radiology beam (RQR5) was utilized. The different results are due to interactions of photons with different materials of the collecting electrode contributing with different values of energy deposited in the sensitive volume of the ionization chamber, which depends on the atomic number of the evaluated materials. The material that presented the least influence was graphite, the original constituent of the ionization chamber. (author)

  20. Bibliography of published material related to the Soviet PNE Program

    International Nuclear Information System (INIS)

    Ledbetter, G.P.; Nordyke, M.D.

    1977-01-01

    Scientists in the Soviet Union have published many papers that provide details about the Soviet program for the peaceful use of nuclear explosions. Over the years much of this material has been gathered at the Lawrence Livermore Laboratory into what has become a sizeable collection. The bibliography of 334 references provides a useful record of the material available in that collection. The bibliography is divided into three main parts. Part I lists articles alphabetically. In Part II, the same articles are arranged by subject; many of them are included under more than one subject category. Part III is a list of important collections of papers. These collections provide many of the articles listed in Parts I and II

  1. ETV Program Report: Coatings for Wastewater Collection Systems - Standard Cement Materials, Epoxy Coating 4553

    Science.gov (United States)

    The Standard Cement Materials, Inc. Standard Epoxy Coating 4553™ (SEC 4553) epoxy coating used for wastewater collection system rehabilitation was evaluated by EPA’s Environmental Technology Verification Program under laboratory conditions at the Center for Innovative Grouting Ma...

  2. Individual differences in children's materialism: the role of peer relations.

    Science.gov (United States)

    Banerjee, Robin; Dittmar, Helga

    2008-01-01

    Associations between materialism and peer relations are likely to exist in elementary school children but have not been studied previously. The first two studies introduce a new Perceived Peer Group Pressures (PPGP) Scale suitable for this age group, demonstrating that perceived pressure regarding peer culture (norms for behavioral, attitudinal, and material characteristics) can be reliably measured and that it is connected to children's responses to hypothetical peer pressure vignettes. Studies 3 and 4 evaluate the main theoretical model of associations between peer relations and materialism. Study 3 supports the hypothesis that peer rejection is related to higher perceived peer culture pressure, which in turn is associated with greater materialism. Study 4 confirms that the endorsement of social motives for materialism mediates the relationship between perceived peer pressure and materialism.

  3. Are Competitive Materialism and Female Employment Related to International Homicide Rate?

    Science.gov (United States)

    Chon, Don Soo

    2017-04-01

    The institutional anomie theory is a proposal that states competitive materialism, an intense cultural pressure for economic success at any costs, and increased female employment may be related to a high homicide rate. The current work tested this proposition by utilizing homicide data collected from 45 developed and developing countries. Regression results did not support the proposition. Competitive materialism and female employment were not significantly related to the cross-national variation of homicide rates.

  4. Current Condition of Michigan Curriculum Materials Centers and Collections in Academic Institutions

    Science.gov (United States)

    Kohrman, Rita

    2015-01-01

    A 2005 sabbatical study revealed 24 unique curriculum materials centers or collections (CMCs) in Michigan colleges or universities. The focus of the study was to investigate the number, characteristics, and quality of these centers and collections supporting education faculty and students. A follow up 2014 study asked how or if the Michigan…

  5. 77 FR 20886 - Proposed Information Collection (Advertising, Sales, and Enrollment Materials, and Candidate...

    Science.gov (United States)

    2012-04-06

    ... (Advertising, Sales, and Enrollment Materials, and Candidate Handbooks) Activity: Comment Request AGENCY... the Office of Management and Budget (OMB) for each collection of information they conduct or sponsor... information technology. Title: Advertising, Sales, and Enrollment Materials, and Candidate Handbooks, 38 CFR...

  6. Systems and methods for producing biofuels and related materials

    Science.gov (United States)

    Leschine, Susan; Warnick, Thomas A.

    2010-03-23

    Clostridium phytofermentans cells (American Type Culture Collection 700394.sup.T) and all other strains of the species can ferment materials such as biomass into useful products and coproducts, such as ethanol, hydrogen and organic acids. Compositions that include Clostridium phytofermentans are also disclosed.

  7. Radiation resistance of InP-related materials

    International Nuclear Information System (INIS)

    Yamaguchi, Masafumi; Takamoto, Tatsuya; Ikeda, Eiji; Kurita, Hiroshi; Ohmori, Masamichi; Ando, Koshi; Vargas-Aburto, C.

    1995-01-01

    Irradiation effects of 1-MeV electrons on InP-related materials such as InP, InGaP and InGaAsP have been examined in comparison with those of GaAs. Superior radiation-resistance of InP-related materials and their devices compared to GaAs has been found in terms of minority-carrier diffusion length and properties of devices such as solar cells and light-emitting devices. Moreover, minority-carrier injection-enhanced annealing of radiation-induced defects in InP-related materials has also been observed. (author)

  8. Issues related to the inter-utility transfer of material

    International Nuclear Information System (INIS)

    1993-08-01

    An option that utilities have for obtaining material is to procure the desired item(s) from another utility. There are several reasons utilities choose another utility as the procurement source including item obsolescence, prohibitive cost on the commercial market, and excessive lead time. This document provides information on the technical, quality, and commercial issues which utilities may need to address when selling material to or procuring material from other utilities. This report provides suggested approaches for each of the following technical and quality issues: Design considerations; item acceptability considerations; original supplier considerations; commercial grade item dedication considerations; reportability considerations; packaging, shipping, and storage considerations; documentation considerations; receipt inspection considerations. The information is provided primarily for the inter-utility transfer of safety-related material. Several of the topics, however, may also apply to the transfer of non-safety-related material. The report also provides considerations on commercial issues which may be addressed during the inter-utility transfer of materials

  9. Preserving local writers, genealogy, photographs, newspapers, and related materials

    CERN Document Server

    Smallwood, Carol

    2012-01-01

    Preserving Local Writers, Genealogy, Photographs, Newspapers, and Related Materials draws on the practical knowledge of archivists, preservationists, librarians, and others who share the goal of making local history accessible to future generations. Anyone who plans to start a local history project or preserve important historical materials will find plenty of tips, techniques, sample documents, project ideas, and inspiration in its pages.

  10. GAINS IN PERFORMANCE OF DIFFERENT METHODS OF COLLECTING ENTOMOLOGICAL MATERIALS IN ENVIRONMENTAL AND FAUNAL STUDIES ON COLEOPTERA

    Directory of Open Access Journals (Sweden)

    B. N. Saypulaeva

    2015-01-01

    Full Text Available The aim is to study the effectiveness of methods of collecting entomological materials for further ecological and faunal studies as well as to gain the main evidence in ecological and faunal studies carried out in the field. Collection of the evidence in the field is necessary for the identification of species composition and to study such aspects as the distribution of species, confinement of species to certain habitats, relations with the food objects (trophism, climate, soil and orographic environmental factors.Methodology. We have used the traditional methods of collection (hand picking, pitfall traps, pitfall traps with increased light, light traps, processing and determination of materials. In recent years, the method of collection of soil invertebrates has introduced an innovation. In expeditionary studies in the island of Tyuleny new ways have been tested of using pitfall traps equipped with an incandescent light source. They provide a higher collection efficiency of Entomological materials. List of species composition of the discussed fauna has been composed by modern taxonomy with the use of directories.Results. We have made a comparative analysis of the effectiveness of different methods of collecting entomological materials on Coleoptera (Carabidae, Scarabaeidae, Elateridae, Tenebrionidae for environmental and faunal studies in the area of Irganayskaya arid basin of intramontane Dagestan. Not all species, registered in the studied habitat, have been identified by methods of soil sampling and pitfall traps. The greatest number of species has been identified by manual collection, and the least by soil sampling. The paper shows the effectiveness of different methods of collecting entomofauna against individual families and species of the groups studied.

  11. 77 FR 38307 - Agency Information Collection Activities: Refugee/Asylee Relative Petition, Extension, Without...

    Science.gov (United States)

    2012-06-27

    ... Collection Activities: Refugee/Asylee Relative Petition, Extension, Without Change, of a Currently Approved Collection ACTION: 60-Day Notice of Information Collection Under Review: Form I- 730, Refugee/Asylee Relative...: Extension, without change, of a currently approved collection. (2) Title of the Form/Collection: Refugee...

  12. Introducing LIR (Lithotheque Ireland, a reference collection of flaked stone tool raw materials from Ireland

    Directory of Open Access Journals (Sweden)

    Killian Driscoll

    2016-09-01

    Full Text Available The LIR (Lithotheque Ireland reference collection of flaked stone tool raw materials from Ireland began in 2013, and is based on the geological prospection from two projects. The first (2013-2015 focused attention primarily on Carboniferous cherts from the northwest of Ireland, collecting 405 samples. The second (2015-2017 is currently collecting samples of the Cretaceous flint primarily from in situ contexts in the northeast of Ireland, but also includes beach surveys of Cretaceous flint from around the island; the first phase of geological prospection in Autumn 2015 collected 239 samples, with the geological prospection continuing in 2016. Therefore, to date the collection contains over 600 hand samples of chert and flint, along with a small number of other materials (siliceous limestone, tuff, mudstone. The physical reference collection is housed at the UCD School of Archaeology, University College Dublin and contains the geological hand samples along with the various thin sections of the samples that are used for petrographic analysis. The physical collection is complemented by an online database that is to be used alongside the physical collection, or can be used as a stand-alone resource. This paper provides an overview of the database’s metadata and the processes of data entry and editing, to serve as a reference point for the database and the fieldwork undertaken to date, and to serve as a template for other researchers undertaking similar work on lithic reference collections.

  13. Data Collection Handbook to Support Modeling Impacts of Radioactive Material in Soil and Building Structures

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Cheng [Argonne National Lab. (ANL), Argonne, IL (United States); Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    This handbook is an update of the 1993 version of the Data Collection Handbook and the Radionuclide Transfer Factors Report to support modeling the impact of radioactive material in soil. Many new parameters have been added to the RESRAD Family of Codes, and new measurement methodologies are available. A detailed review of available parameter databases was conducted in preparation of this new handbook. This handbook is a companion document to the user manuals when using the RESRAD (onsite) and RESRAD-OFFSITE code. It can also be used for RESRAD-BUILD code because some of the building-related parameters are included in this handbook. The RESRAD (onsite) has been developed for implementing U.S. Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), crops and livestock, human intake, source characteristic, and building characteristic parameters are used in the RESRAD (onsite) code. The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code and can also model the transport of radionuclides to locations outside the footprint of the primary contamination. This handbook discusses parameter definitions, typical ranges, variations, and measurement methodologies. It also provides references for sources of additional information. Although this handbook was developed primarily to support the application of RESRAD Family of Codes, the discussions and values are valid for use of other pathway analysis models and codes.

  14. The projected relative index of consequence equivalence of transport of radioactive materials

    International Nuclear Information System (INIS)

    Nandakumar, A.N.

    1999-01-01

    The need exists for defining a unit risk factor to enable analysis to make a proper decision when faced with many options relating to the transport of radioactive materials between sites. A method is discussed for deriving such a factor with reference to the collective dose receivable due to the transport of radioactive material incidental to the production of one GWe.a of nuclear power. This quantity would enable the analyst to determine the projected relative index of consequence equivalence (PRICE) for the transport of various types of radioactive materials. (author)

  15. 78 FR 43003 - Proposed Collection; Comment Request on Information Collection Tools Relating to the Offshore...

    Science.gov (United States)

    2013-07-18

    ... information collections, as required by the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3506... accounts and undisclosed foreign entities to avoid or evade tax into compliance with United States tax laws... information unless the collection of information displays a valid OMB control number. Books or records...

  16. Acting and Collecting: Imagining Asia through material culture and musical theatre

    OpenAIRE

    Peter Thorley

    2015-01-01

    This paper explores the link between Asian-inspired material culture and musical theatre through the collections of Anglo-Australian performer Herbert Browne (1895-1975). Brown played lead roles in 1920s Australian musical theatre productions of The Mikado and Chu Chin Chow and re-lived his connection with oriental theatre by collecting and responding to objects performatively in the Chinoiserie room of his Melbourne home. Oriental musical theatre blended exotic cultures and locales in visual...

  17. Comparison of shrinkage related properties of various patch repair materials

    Science.gov (United States)

    Kristiawan, S. A.; Fitrianto, R. S.

    2017-02-01

    A patch repair material has been developed in the form of unsaturated polyester resin (UPR)-mortar. The performance and durability of this material are governed by its compatibility with the concrete being repaired. One of the compatibility issue that should be tackled is the dimensional compatibility as a result of differential shrinkage between the repair material and the concrete substrate. This research aims to evaluate such shrinkage related properties of UPR-mortar and to compare with those of other patch repair materials. The investigation includes the following aspects: free shrinkage, resistance to delamination and cracking. The results indicate that UPR-mortar poses a lower free shrinkage, lower risk of both delamination and cracking tendency in comparison to other repair materials.

  18. 77 FR 30540 - Proposed Collection; Comment Request; Cognitive Testing of Instrumentation and Materials for the...

    Science.gov (United States)

    2012-05-23

    ..., materials to support data collection (e.g., advance mailings, reminder letters, etc.), consent forms, and methods of administration (e.g., computer assisted personal interviews [CAPI], audio computer assisted... Assent Forms Youth 98 1 2 196 Consent Forms Adult 98 1 2 196 PATH Study Questionnaires Youth 40 1 2 80...

  19. 77 FR 58173 - Proposed Extension of Existing Information Collection; Explosive Materials and Blasting Units...

    Science.gov (United States)

    2012-09-19

    ... information in accordance with the Paperwork Reduction Act of 1995. This program helps to assure that requested data can be provided in the desired format, reporting burden (time and financial resources) is... Extension of Existing Information Collection; Explosive Materials and Blasting Units (Pertains to Metal and...

  20. Evaluation of a fungal collection as certified reference material producer and as a biological resource center

    Directory of Open Access Journals (Sweden)

    Tatiana Forti

    2016-06-01

    Full Text Available Abstract Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC. For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061.

  1. Evaluation of a fungal collection as certified reference material producer and as a biological resource center.

    Science.gov (United States)

    Forti, Tatiana; Souto, Aline da S S; do Nascimento, Carlos Roberto S; Nishikawa, Marilia M; Hubner, Marise T W; Sabagh, Fernanda P; Temporal, Rosane Maria; Rodrigues, Janaína M; da Silva, Manuela

    2016-01-01

    Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC). For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  2. Collection of preputial material by scraping and aspiration for the diagnosis of Tritrichomonas foetus in bulls

    Directory of Open Access Journals (Sweden)

    P.C. Irons

    2002-07-01

    Full Text Available Two trials were carried out to assess the diagnostic sensitivity and practicability of preputial scraping as a method of collecting preputial material from bulls infected with Tritrichomonas foetus. In the 1st trial, preputial material was collected by simultaneous scraping and aspiration from 3 infected and 1 uninfected bull 10 times over a 5-week period. In the 2nd trial, samples from 5 infected bulls were collected by both sheath washing and scraping on 6 occasions, while 8 uninfected animals were sampled 3 times. Samples were cultured using a modified Trichomonas culture medium (Oxoid. In the first trial, 29 of 30 samples from infected bulls were found to be positive. In the second trial, 83 % of samples collected by both methods tested positive. In neither trial were any samples from the control bulls found to be positive. Scraping was found to be quick and safe, and offered advantages over preputial washing in that urine contamination was easily avoided, samples were smaller and more concentrated and contamination was reduced. It may, however, be subject to greater operator variability than sheath washing. It is concluded that preputial scraping is as effective as washing and represents a suitable alternative for the collection of material for direct examination and culture of Tritrichomonas foetus.

  3. A collective theory of happiness: words related to the word "happiness" in Swedish online newspapers.

    Science.gov (United States)

    Garcia, Danilo; Sikström, Sverker

    2013-06-01

    It may be suggested that the representation of happiness in online media is collective in nature because it is a picture of happiness communicated by relatively few individuals to the masses. The present study is based on articles published in Swedish daily online newspapers in 2010; the data corpus comprises 1.5 million words. We investigated which words were most (un)common in articles containing the word "happiness" as compared with articles not containing this word. The results show that words related to people (by use of all relevant pronouns: you/me and us/them); important others (e.g., grandmother, mother); the Swedish royal wedding (e.g., Prince Daniel, Princess Victoria); and the FIFA World Cup (e.g., Zlatan, Argentina, Drogba) were highly recurrent in articles containing the word happiness. In contrast, words related to objects, such as money (e.g., millions, billions), bestselling gadgets (e.g., iPad, iPhone), and companies (e.g., Google, Windows), were predictive of contexts not recurrent with the word happiness. The results presented here are in accordance with findings in the happiness literature showing that relationships, not material things, are what make people happy. We suggest that our findings mirror a collective theory of happiness, that is, a shared picture or agreement, among members of a community, concerning what makes people happy. The fact that this representation is made public on such a large scale makes it collective in nature.

  4. Production of a diffuse very high reflectivity material for light collection in nuclear detectors

    CERN Document Server

    Pichler, B J; Mirzoyan, R; Weiss, L; Ziegler, S I

    2000-01-01

    A diffuse very high reflectivity material, based on polytetrafluorethylene (PTFE) for optimization of light-collection efficiency has been developed. PTFE powder was used to produce reflector block material. The powder was pressed with 525 kPa in a form and sintered at 375 deg. C. The reflectivity was above 98% within the spectral range from 350 to 1000 nm. The blocks of this material are machinable with saws, drilling and milling machines. The reflector is used as a housing for scintillating crystals in a nuclear medicine application (small animal positron emission tomograph). It is also used as a light collector in very high-energy gamma-ray astrophysicas experiments, HEGRA and MAGIC. The application of this inexpensive, easy to make diffuse reflector may allow the optimization of light collection in a wide range of low-level light-detector configurations.

  5. Hydrogenated amorphous silicon radiation detectors: Material parameters; radiation hardness; charge collection

    International Nuclear Information System (INIS)

    Qureshi, S.

    1991-01-01

    Properties of hydrogenated amorphous silicon p-i-n diodes relevant to radiation detection applications were studied. The interest in using this material for radiation detection applications in physics and medicine was motivated by its high radiation hardness and the fact that it can be deposited over large area at relatively low cost. Thick, fully depleted a-Si:H diodes are required for sufficient energy deposition by a charged particle and better signal to noise ratio. A sizeable electric field is essential for charge collection in a -Si:H diodes. The large density of ionized defects that exist in the i layer when the diode is under DC bias causes the electric field to be uniform. Material parameters, namely carrier mobility and lifetime and the ionized defect density in thick a-Si:H p-i-n diodes were studied by the transient photoconductivity method. The increase in diode leakage current with reverse bias over the operating bias was consistent with the Poole-Frenkel effect, involving excitation of carriers from neutral defects. The diode noise over the operating voltage range was completely explained in terms of the shot noise component for CR-(RC) 4 (pseudo-Gaussian) shaping at 3 μs shaping time and the noise component at 0 V bias (delta and thermal noise) added in quadrature. Irradiation with 1 Mev neutrons produced no significant degradation in leakage current and noise at fluences exceeding 4 x 10 14 cm -2 . Irradiation with 1.4 Mev proton fluence of 1 x 10 14 cm -2 decreased carrier lifetime by a factor of ∼4. Degradation in leakage current and noise became significant at proton fluence of ∼10 13 cm -2

  6. International Congress on Energy Efficiency and Energy Related Materials

    CERN Document Server

    Bahsi, Zehra; Ozer, Mehmet; ENEFM2013

    2014-01-01

    The International Congress on Energy Efficiency and Energy Related Materials (ENEFM2013) was held on 9-12 October, 2013. This three-day congress focused on the latest developments of sustainable energy technologies, materials for sustainable energy applications and environmental & economic perspectives of energy. These proceedings include 63 peer reviewed technical papers, submitted from leading academic and research institutions from over 23 countries, representing some of the most cutting edge research available. The papers included were presented at the congress in the following sessions: General Issues Wind Energy Solar Energy Nuclear Energy Biofuels and Bioenergy Energy Storage Energy Conservation and Efficiency Energy in Buildings   Economical and Environmental Issues Environment Energy Requirements Economic Development   Materials for Sustainable Energy Hydrogen Production and Storage Photovoltaic Cells Thermionic Converters Batteries and Superconductors Phase Change Materials Fuel Cells Supercon...

  7. A relation to describe rate-dependent material failure.

    Science.gov (United States)

    Voight, B

    1989-01-13

    The simple relation OmegaOmega-alpha = 0, where Omega is a measurable quantity such as strain and A and alpha are empirical constants, describes the behavior of materials in terminal stages of failure under conditions of approximately constant stress and temperature. Applicable to metals and alloys, ice, concrete, polymers, rock, and soil, the relation may be extended to conditions of variable and multiaxial stress and may be used to predict time to failure.

  8. A Study in Historical Materialism and International Relations

    African Journals Online (AJOL)

    Historical materialism as a discourse assumes that the economic determines the political and other dimensions of society. Nigeria had set specific conditions for renewed relations with apartheid South Africa. These were yet to be met and the intensity that characterised Nigeria's pursuance of an aggressive anti-apartheid ...

  9. EU external relations law : text, cases and materials

    NARCIS (Netherlands)

    Van Vooren, Bart; Wessel, Ramses A.

    2014-01-01

    This major new textbook for students in European law uses a text, cases and materials approach to explore the law, politics, policy and practice of EU external relations, and navigates the complex questions at the interface of these areas. The subject is explored by explaining major constitutional

  10. A survey of collection development for United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation material.

    Science.gov (United States)

    Hendrix, Dean; Hasman, Linda

    2008-07-01

    The research sought to ascertain medical and dental libraries' collection development policies, evaluation methods, purchase decisions, and issues that relate to print and electronic United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation materials. The investigators surveyed librarians supporting American Association of Medical Colleges (AAMC)-accredited medical schools (n = 58/125) on the USMLE and librarians supporting American Dental Association (ADA)-accredited dental schools (n = 23/56) on the NBDE. The investigators analyzed the data by cross-tabulating and filtering the results using EFM Continuum web survey software. Investigators also surveyed print and electronic USMLE and NBDE preparation materials from 2004-2007 to determine the number of publications and existence of reviews. A majority of responding AAMC libraries (62%, n = 58) provide at least 1 electronic or online USMLE preparation resource and buy an average of 11.6 print USMLE titles annually. Due to a paucity of NBDE print and electronic resources, ADA libraries bought significantly fewer print resources, and only 1 subscribed to an electronic resource. The most often reported evaluation methods for both populations were feedback from medical or dental students, feedback from medical or dental faculty, and online trials. Some AAMC (10%, n = 58) and ADA libraries (39%, n = 23) libraries reported that no evaluation of these materials occured at their libraries. From 2004-2007, publishers produced 45 USMLE preparation resources (total n = 546) to every 1 NBDE preparation resource (total n = 12). Users' needs, institutional missions and goals, financial status, and official collection policies most often underlie decisions to collect or not collect examination preparation materials. Evaluating the quality of examination preparation materials can be problematic due to lack of published reviews, lack of usability testing by libraries, and

  11. Nuclide-related exemption limits for radioactive materials

    International Nuclear Information System (INIS)

    Przyborowski, S.; Scheler, R.

    1984-01-01

    A procedure has been proposed for setting nuclide-related exemption limits for radioactive materials. It consists in grading the radionuclides into 4 groups of radiotoxicity and assigning only one activity limit to each of them. Examples are given for about 200 radionuclides. The radiation exposures resulting from a continuous steady release of activity fractions or from short-period release of the entire activity were assessed to remain below 0.1 ALI in both of these borderline cases, thus justifying the license-free utilization of radioactive materials below the exemption limits. (author)

  12. Actions of radiation protection in the collection of discarded radioactive material

    International Nuclear Information System (INIS)

    Neri, E.P.M.; Silva, F.C.A. da

    2017-01-01

    Brazil has approximately 2000 radiative facilities that use radiation sources in their processes and are controlled by The Brazilian Nuclear Energy Commission - CNEN through standards, authorizations and inspections. These radioactive materials, whether in the form of waste or radioactive source, used in medical, industrial, research, etc. are sometimes discarded and found in inappropriate places, such as garbage dumps, industrial waste, streets, squares, etc. found by urban cleaning professionals without the proper knowledge of them. The work presents the radiation protection actions required for the safe collection of radioactive material to be performed by these professionals. According to the type of radioactive material the main actions of radiation protection are, among others: recognition of a radioactive material; correct use of personal protective equipment to contain possible radiation contamination; implementation of an area control etc. In order for the actions of recognition and collection of discarded radioactive material to be effective, there is a need to implement a training program in radiation protection for urban cleaning professionals

  13. Collection of radiation resistant characteristics reports for instruments and materials in high dose rate environment

    International Nuclear Information System (INIS)

    Kusano, Joichi

    2008-03-01

    This document presents the collected official reports of radiation irradiation study for the candidate materials to be used in high dose rate environment as J-PARC facility. The effect of radiation damage by loss-beam or secondary particle beam of the accelerators influences the performance and the reliability of various instruments. The knowledge on the radiation resistivity of the materials is important to estimate the life of the equipments, the maintenance interval and dose evaluation for the personnel at the maintenance period. The radiation damage consists with mechanical property, electrical property and gas-evolution property. (author)

  14. Holdup-related issues in safeguarding of nuclear materials

    International Nuclear Information System (INIS)

    Pillay, K.K.S.

    1988-03-01

    Residual inventories of special nuclear materials (SNM) remaining in processing facilities (holdup) are recognized as an insidious problem for both safety and safeguards. This paper identifies some of the issues that are of concern to the safeguards community at-large that are related to holdup of SNM in large-scale process equipment. These issues range from basic technologies of SNM production to changing regulatory requirements to meet the needs of safeguarding nuclear materials. Although there are no magic formulas to resolve these issues, there are several initiatives that could be taken in areas of facility design, plant operation, personnel training, SNM monitoring, and regulatory guidelines to minimize the problems of holdup and thereby improve both safety and safeguards at nuclear material processing plants. 8 refs

  15. Relating water and air flow characteristics in coarse granular materials

    DEFF Research Database (Denmark)

    Andreasen, Rune Røjgaard; Canga, Eriona; Poulsen, Tjalfe Gorm

    2013-01-01

    Water pressure drop as a function of velocity controls w 1 ater cleaning biofilter operation 2 cost. At present this relationship in biofilter materials must be determined experimentally as no 3 universal link between pressure drop, velocity and filter material properties have been established. 4...... Pressure drop - velocity in porous media is much simpler and faster to measure for air than for water. 5 For soils and similar materials, observations show a strong connection between pressure drop – 6 velocity relations for air and water, indicating that water pressure drop – velocity may be estimated 7...... from air flow data. The objective of this study was, therefore, to investigate if this approach is valid 8 also for coarse granular biofilter media which usually consists of much larger particles than soils. In 9 this paper the connection between the pressure drop – velocity relationships for air...

  16. Nuclear power plant containment metallic pressure boundary materials and plans for collecting and presenting their properties

    International Nuclear Information System (INIS)

    Oland, C.B.

    1995-04-01

    A program is being conducted at the Oak Ridge National Laboratory (ORNL to assist the Nuclear Regulatory Commission (NRC)) in their assessment of the effects of degradation (primarily corrosion) on the structural capacity and leaktight integrity of metal containments and steel liners of reinforced concrete structures in nuclear power plants. One of the program objectives is to characterize and quantify manifestations of corrosion on the properties of steels used to construct containment pressure boundary components. This report describes a plan for use in collecting and presenting data and information on ferrous alloys permitted for use in construction of pressure retaining components in concrete and metal containments. Discussions about various degradation mechanisms that could potentially affect the mechanical properties of these materials are also included. Conclusions and recommendations presented in this report will be used to guide the collection of data and information that will be used to prepare a material properties data base for containment steels

  17. Acting and Collecting: Imagining Asia through material culture and musical theatre

    Directory of Open Access Journals (Sweden)

    Peter Thorley

    2015-07-01

    Full Text Available This paper explores the link between Asian-inspired material culture and musical theatre through the collections of Anglo-Australian performer Herbert Browne (1895-1975. Brown played lead roles in 1920s Australian musical theatre productions of The Mikado and Chu Chin Chow and re-lived his connection with oriental theatre by collecting and responding to objects performatively in the Chinoiserie room of his Melbourne home. Oriental musical theatre blended exotic cultures and locales in visually spectacular productions which bore little resemblance to reality. The taste for escapist fiction in the theatre took place against a backdrop of museum collecting which aimed to reproduce authentic Asian and Other cultures. In this paper, I draw on French philosopher Merleau-Ponty’s observations on the relationship between thought and the body’s interaction with space to interpret the influence of Browne’s theatricality on collecting choices. From this perspective, objects materialize particular understandings of the world which originate in the body and the body’s performative engagement with space.

  18. The united fund of materials about Chernobyl-related issues

    International Nuclear Information System (INIS)

    Bashilov, A. V.; Borisevich, N.Ya.; Sobolev, O.V.

    2013-01-01

    The United Fund of materials about Chernobyl-related issues was created in Russian-Belarusian Information Center on the Problems of the Consequences of the Catastrophe at Chernobyl NPP branch RSRUE 'Institute of Radiology' Ministry for Emergency Situations of the Republic of Belarus. It contains accumulated during the post-Chernobyl period systematized maps, scientific and practical, educational, documentary, journalistic, artistic, photographic and other information. (authors)

  19. A common basis for facilitated legitimate exchange of biological materials proposed by the European Culture Collections' Organisation

    Directory of Open Access Journals (Sweden)

    Dagmar Fritze

    2009-12-01

    Full Text Available Being charged with the task of accessioning and supplying of living microbiological material, microbial culture collections are institutions that play a central role between the interests of a variety of user communities. On the one side are the providers of living microbiological material, such as individual scientists, institutions and countries of origin and on the other side are the various kinds of recipients/users of cultures of microorganisms from academia and industry. Thus, providing access to high quality biological material and scientific services while at the same time observing donor countries' rights, intellectual property rights, biosafety and biosecurity aspects poses demanding challenges. E.g. donor countries rights relate to Article 15 of the Convention on Biological Diversity: "Contracting parties …. recognize the sovereign rights of states over their natural resources …. shall facilitate access to resources … and not impose restrictions that run counter to the aims of the Convention. Access to natural resources shall be by mutually agreed terms and subject to prior informed consent ..." The use of a proposed standard contract by culture collections is discussed as a way of contractually safeguarding the existing research commons, while observing the new rights established in the Convention on Biological Diversity as well as other existing and new legislation impacting on the accessibility of living microbial material.

  20. Data collection handbook to support modeling the impacts of radioactive material in soil

    International Nuclear Information System (INIS)

    Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E.; Loureiro, C.; Chia, Y.P.

    1993-04-01

    A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications

  1. Data collection handbook to support modeling the impacts of radioactive material in soil

    Energy Technology Data Exchange (ETDEWEB)

    Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.; Loureiro, C. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Escola de Engenharia; Chia, Y.P. [National Taiwan Univ., Taipei (Taiwan, Province of China). Dept. of Geology

    1993-04-01

    A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications.

  2. Improved explosive collection and detection with rationally assembled surface sampling materials

    Energy Technology Data Exchange (ETDEWEB)

    Chouyyok, Wilaiwan; Bays, J. Timothy; Gerasimenko, Aleksandr A.; Cinson, Anthony D.; Ewing, Robert G.; Atkinson, David A.; Addleman, R. Shane

    2016-01-01

    Sampling and detection of trace explosives is a key analytical process in modern transportation safety. In this work we have explored some of the fundamental analytical processes for collection and detection of trace level explosive on surfaces with the most widely utilized system, thermal desorption IMS. The performance of the standard muslin swipe material was compared with chemically modified fiberglass cloth. The fiberglass surface was modified to include phenyl functional groups. When compared to standard muslin, the phenyl functionalized fiberglass sampling material showed better analyte release from the sampling material as well as improved response and repeatability from multiple uses of the same swipe. The improved sample release of the functionalized fiberglass swipes resulted in a significant increase in sensitivity. Various physical and chemical properties were systematically explored to determine optimal performance. The results herein have relevance to improving the detection of other explosive compounds and potentially to a wide range of other chemical sampling and field detection challenges.

  3. Reciprocal relations of transport coefficients in simple materials

    International Nuclear Information System (INIS)

    Lam, L.

    1977-01-01

    The cross effects of viscosity and heat conduction in anisotropic simple materials (solids or liquids) are given in the linear regime, using our dissipation function theory introduced recently. Depending on whether the temperature gradient or the heat flux is used in the dissipation function, we show that two different but unambiguous reciprocal relations between the transport coefficients follow. These are compared and contrasted with the confusing predictions from the Onsager theory, and to the results of rational thermodynamics. The uncertain experimental situation in regard to these reciprocal relations is discussed. Experimental tests are strongly urged. (orig.) [de

  4. Planning for the Collection and Analysis of Samples of Martian Granular Materials Potentially to be Returned by Mars Sample Return

    Science.gov (United States)

    Carrier, B. L.; Beaty, D. W.

    2017-12-01

    NASA's Mars 2020 rover is scheduled to land on Mars in 2021 and will be equipped with a sampling system capable of collecting rock cores, as well as a specialized drill bit for collecting unconsolidated granular material. A key mission objective is to collect a set of samples that have enough scientific merit to justify returning to Earth. In the case of granular materials, we would like to catalyze community discussion on what we would do with these samples if they arrived in our laboratories, as input to decision-making related to sampling the regolith. Numerous scientific objectives have been identified which could be achieved or significantly advanced via the analysis of martian rocks, "regolith," and gas samples. The term "regolith" has more than one definition, including one that is general and one that is much more specific. For the purpose of this analysis we use the term "granular materials" to encompass the most general meaning and restrict "regolith" to a subset of that. Our working taxonomy includes the following: 1) globally sourced airfall dust (dust); 2) saltation-sized particles (sand); 3) locally sourced decomposed rock (regolith); 4) crater ejecta (ejecta); and, 5) other. Analysis of martian granular materials could serve to advance our understanding areas including habitability and astrobiology, surface-atmosphere interactions, chemistry, mineralogy, geology and environmental processes. Results of these analyses would also provide input into planning for future human exploration of Mars, elucidating possible health and mechanical hazards caused by the martian surface material, as well as providing valuable information regarding available resources for ISRU and civil engineering purposes. Results would also be relevant to matters of planetary protection and ground-truthing orbital observations. We will present a preliminary analysis of the following, in order to generate community discussion and feedback on all issues relating to: What are the

  5. Analysis on Domestic Law and Management Trend Related to Small-Quantity Nuclear Material

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jae Beom; Lee, Kyong Woo; Shim, Hye Won; Min, Gyung Sik [National Nuclear Management and Control Agency, Daejeon (Korea, Republic of)

    2005-07-01

    International Atomic Energy Agency (IAEA) has requested Korea to establish and manage the law ruling all nuclear materials through the INFCIRC/153. Now, it has been 30 years since Korea made the agreement, INFCIRC/153, with IAEA. Korea has tried their best to accomplish the international standard in nuclear control field and it is a fact that Korea finally produced some results in the nuclear control field. Related to nuclear material control, Korea is above the common level appropriately ranked 6th in the world in terms of nuclear power. Before 2000, Korea was making the foundation secure in the nuclear control. IAEA did not urge to establish the law supervising the small-quantity nuclear material and depleted uranium (DU). In a turnaround from early IAEA moderate line to Korea, the situation was changed. Since IAEA brought up the agenda to 2000 Joint Review Meeting between Korea-IAEA, IAEA has asked Korea to establish the control system for smallquantity nuclear material and DU. In 2003, the Korean government set up a project establishing the control system about all nuclear material including small-quantity nuclear material and DU. National Nuclear Management and Control Agency (NNCA), delegating the business relating to international controlling materials from government, developed some modules in nuclear material control system and operated it. The system includes a controlling system for small-quantity nuclear material. NNCA on behalf of government has collected the information and Korea Ministry of Science and Technology (MOST) has reported the information to the IAEA. This paper introduces you the background of controlling the small-quantity nuclear material and the system of controlling nuclear material in Korea. And it will suggest the improvement of the management method in the system for small-quantity nuclear material.

  6. Analysis on Domestic Law and Management Trend Related to Small-Quantity Nuclear Material

    International Nuclear Information System (INIS)

    Park, Jae Beom; Lee, Kyong Woo; Shim, Hye Won; Min, Gyung Sik

    2005-01-01

    International Atomic Energy Agency (IAEA) has requested Korea to establish and manage the law ruling all nuclear materials through the INFCIRC/153. Now, it has been 30 years since Korea made the agreement, INFCIRC/153, with IAEA. Korea has tried their best to accomplish the international standard in nuclear control field and it is a fact that Korea finally produced some results in the nuclear control field. Related to nuclear material control, Korea is above the common level appropriately ranked 6th in the world in terms of nuclear power. Before 2000, Korea was making the foundation secure in the nuclear control. IAEA did not urge to establish the law supervising the small-quantity nuclear material and depleted uranium (DU). In a turnaround from early IAEA moderate line to Korea, the situation was changed. Since IAEA brought up the agenda to 2000 Joint Review Meeting between Korea-IAEA, IAEA has asked Korea to establish the control system for smallquantity nuclear material and DU. In 2003, the Korean government set up a project establishing the control system about all nuclear material including small-quantity nuclear material and DU. National Nuclear Management and Control Agency (NNCA), delegating the business relating to international controlling materials from government, developed some modules in nuclear material control system and operated it. The system includes a controlling system for small-quantity nuclear material. NNCA on behalf of government has collected the information and Korea Ministry of Science and Technology (MOST) has reported the information to the IAEA. This paper introduces you the background of controlling the small-quantity nuclear material and the system of controlling nuclear material in Korea. And it will suggest the improvement of the management method in the system for small-quantity nuclear material

  7. Planning Considerations Related to Collecting and Analyzing Samples of the Martian Soils

    Science.gov (United States)

    Liu, Yang; Mellon, Mike T.; Ming, Douglas W.; Morris, Richard V.; Noble, Sarah K.; Sullivan, Robert J.; Taylor, Lawrence A.; Beaty, David W.

    2014-01-01

    The Mars Sample Return (MSR) End-to-End International Science Analysis Group (E2E-iSAG [1]) established scientific objectives associ-ated with Mars returned-sample science that require the return and investigation of one or more soil samples. Soil is defined here as loose, unconsolidated materials with no implication for the presence or absence of or-ganic components. The proposed Mars 2020 (M-2020) rover is likely to collect and cache soil in addition to rock samples [2], which could be followed by future sample retrieval and return missions. Here we discuss key scientific consid-erations for sampling and caching soil samples on the proposed M-2020 rover, as well as the state in which samples would need to be preserved when received by analysts on Earth. We are seeking feedback on these draft plans as input to mission requirement formulation. A related planning exercise on rocks is reported in an accompanying abstract [3].

  8. An Efficient approach for selective collection made by scavengers for transportation logistics of recyclable materials

    Directory of Open Access Journals (Sweden)

    Adelino Carlos Maccarini

    2014-01-01

    Full Text Available The advance of technology, associated to the increase in the production of recyclable waste due to the increase of consumption and population, has been led to a search for alternatives of management and minimization of this waste. A part of this recyclable material is collected by scavengers, who do it to guarantee their livelihood. Many of them face logistical difficulties in transportation, mainly when they have to walk long distances and the streets have high slopes. Therefore, to minimize these efforts, the purpose of this paper is to settle mobile warehouses to receive recyclable items, with trucks that receive in bulk all materials collected by the collectors, who will deliver them to someone who will be in the truck for weighing and subsequent payment to the collector. With the help of the Analysis of Variance – ANOVA, studies were made so that this receipt is a quick operation, with the historical record of each sampling in a spreadsheet and value calculations based on this description, thus minimizing errors in weighing in bulk and improving, in every collection, the system reliability.

  9. Matt waste from glass separated collection: an eco-sustainable addition for new building materials.

    Science.gov (United States)

    Bignozzi, M C; Saccani, A; Sandrolini, F

    2009-01-01

    Matt waste (MW), a by-product of purification processes of cullet derived from separated glass waste collection, has been studied as filler for self-compacting concrete and as an addition for newly blended cement. Properties of self-compacting concrete compared to reference samples are reported. They include characteristics at the fresh and hardened states, and the compressive strength and porosity of mortar samples that were formulated with increasing amounts of MW to be used as cement replacement (up to 50wt.%). The effects of matt waste are discussed with respect to the mechanical and microstructural characteristics of the resulting new materials.

  10. [The role of collective victimhood in intergroup aggression: Japan-China relations].

    Science.gov (United States)

    Nawata, Kengo; Yamaguchi, Hiroyuki

    2012-12-01

    This study examines an effect of collective victimhood in intergroup relations. Collective victimhood is the belief that an ingroup has been harmed by an outgroup. Previous studies focusing on collective victimhood have shown that collective victimhood escalates intergroup conflict. We predicted that the effect of collective victimhood on intergroup aggression would involve two different emotional processes: anger and fear. To test this hypothesis, Japanese attitudes toward the Chinese were examined in the context of Japan-China relations. The results of structural equation modeling showed that collective victimhood enhanced both anger and fear. However, intergroup emotions had converse effects on intergroup aggression. While anger promoted intergroup aggression, fear inhibited it. Nationalism promoted collective victimhood. These findings suggest that, in intergroup conflict, collective victimhood affects intergroup aggression through two emotional processes, which have inverse effects on the aggression.

  11. Model, Materialism, and Immanent Utopia in Relational Aesthetics

    DEFF Research Database (Denmark)

    Degn Johansson, Troels

    ), is crucial for the understanding of contemporary, socially and politically oriented fine art of the mid-1990 and onwards and its challenge of established aesthetic conceptions within art as well as theory. The concept of model is a reoccurring figure in RA and connects to a widespread "lab" (laboratory......  This paper seeks to contribute to the development of socio-aesthetics by analysing the notion of model established in the discourse of relational art--that is of course with special reference to French art critic Nicolas Bourriad's theoretical writings. His seminal book, Relational Aesthetics (RA......) metaphor where social reality is staged and facilitated in order to document and present its development. At the same time however, the notion of model is difficult to dissociate from Bourriaud's materialism which draws on such different figures as the late Althusser, Lucretius, and Deleuze and which...

  12. 77 FR 65702 - Agency Information Collection Activities: Refugee/Asylee Relative Petition, Form Number I-730...

    Science.gov (United States)

    2012-10-30

    ...-0037] Agency Information Collection Activities: Refugee/Asylee Relative Petition, Form Number I-730... request. (2) Title of the Form/Collection: Refugee/Asylee Relative Petition. (3) Agency form number, if... households. Form I- 730 will be used by an asylee or refugee to file on behalf of his or her spouse and/or...

  13. Book Review: EU External Relations Law: Text, Cases and Materials

    Directory of Open Access Journals (Sweden)

    Graham Butler

    2014-06-01

    Full Text Available This latest textbook contributing to the field of EU external relations law is unique in that it is the first such book in the post-Treaty of Lisbon environment to take a wide-angled look on as many aspects of the growing area as it continues to develop within the legal parameters as set by the Treaties, and it is suitably placed to become the core text for teaching this expanding EU policy field. In their book, EU External Relations Law: Text, Cases and Materials, Van Vooren and Wessel seek to fill the gap in up-to-date literature from a legal standpoint in the field of external relations of the EU, with a book that is suitable for delivery as a core textbook for students of all levels. Their analysis covering fifteen long chapters offers the reader a comprehensive insight into the world of EU external relations law, and allows for a thoroughly better understanding of all the encapsulated issues that are at play.

  14. A comparison of results for samples collected with bailers constructed of different materials

    International Nuclear Information System (INIS)

    Thomey, N.; Ogle, R.; Jackson, J.

    1992-01-01

    A bailer is one of the most common sampling devices used to collect ground water samples. Bailers constructed from various materials are available; teflon, polyvinyl chloride (PVC), polyethylene, and stainless steel are all commonly used. It is widely recognized that sample results can be affected by the material from which the bailer is constructed. Teflon and stainless steel are usually recommended based upon their inert properties. The cost of these bailers is significantly higher than other types. For the purposes of petroleum storage tank investigations, sampling devices that would not compromise sample quality but be more economical than teflon or stainless steel would be especially desirable. Water samples were collected using the different types of bailers; teflon, stainless steel, PVC, and polyethylene. Split samples were analyzed for benzene, toluene, ethylbenzene, total xylenes, and Total Petroleum Hydrocarbons. The analytical results were compared to determine if differences were due to normal analytical variances or due to interaction of the sample with the sampling device. No difference was noted in the results which were obtained

  15. IAEA mode-related research in the safe transport of radioactive material

    Energy Technology Data Exchange (ETDEWEB)

    Blalock, L.G.; Rawl, R.R. [International Atomic Energy Agency, IAEA, Vienna (Austria)

    1998-07-01

    The International Atomic Energy Agency sponsors Co-ordinated Research Programmes (CRP) in the safe transport of radioactive material. The CRPs are intended to encourage research by Member States in identified areas and to facilitate co-ordination of exchange of information and resources to reach a common understanding of the problem and alternative solutions. Two of these programmes are: Accident Severity at Sea During the Transport of Radioactive Material and Accident Severity During the Air Transport of Radioactive Material. This paper will discuss these two programmes and their relationship to the continuing regulatory revision process and interfaces with the International Maritime Organization (IMO) and the International Civil Aviation Organization (ICAO). Some Member States and non-governmental organizations in IMO meetings expressed concerns that accidents on board ships may be more severe than the IAEA regulatory tests account for, and that package failure with subsequent release of radioactive material may occur. The CRP on accident severity at sea was established to develop further quantitative information on potential accident severities during the transport of radioactive material by ships. The primary objective of this programme is to collect and evaluate statistical data of marine accidents, perform analyses of potential accident conditions and evaluate the risks resulting from such shipments. The CRP on air transport was established to make a major international effort to collect relevant frequency and severity data and to analyze it so the accident forces to which a packages of radioactive material might be subjected to in a severe air accident can be more confidently quantified. Several countries have ongoing data collection activities related to aircraft accidents and severity and other sources of statistics for in-flight aircraft accidents will be explored. The International Civil Aviation Organization informed the IAEA of their plans to improve

  16. IAEA mode-related research in the safe transport of radioactive material

    International Nuclear Information System (INIS)

    Blalock, L.G.; Rawl, R.R.

    1998-01-01

    The International Atomic Energy Agency sponsors Co-ordinated Research Programmes (CRP) in the safe transport of radioactive material. The CRPs are intended to encourage research by Member States in identified areas and to facilitate co-ordination of exchange of information and resources to reach a common understanding of the problem and alternative solutions. Two of these programmes are: Accident Severity at Sea During the Transport of Radioactive Material and Accident Severity During the Air Transport of Radioactive Material. This paper will discuss these two programmes and their relationship to the continuing regulatory revision process and interfaces with the International Maritime Organization (IMO) and the International Civil Aviation Organization (ICAO). Some Member States and non-governmental organizations in IMO meetings expressed concerns that accidents on board ships may be more severe than the IAEA regulatory tests account for, and that package failure with subsequent release of radioactive material may occur. The CRP on accident severity at sea was established to develop further quantitative information on potential accident severities during the transport of radioactive material by ships. The primary objective of this programme is to collect and evaluate statistical data of marine accidents, perform analyses of potential accident conditions and evaluate the risks resulting from such shipments. The CRP on air transport was established to make a major international effort to collect relevant frequency and severity data and to analyze it so the accident forces to which a packages of radioactive material might be subjected to in a severe air accident can be more confidently quantified. Several countries have ongoing data collection activities related to aircraft accidents and severity and other sources of statistics for in-flight aircraft accidents will be explored. The International Civil Aviation Organization informed the IAEA of their plans to improve

  17. Culture, Materiality, Memory: Collective Ownership and Action In Romanian Mutual Funds

    Directory of Open Access Journals (Sweden)

    Narcis TULBURE

    2015-12-01

    Full Text Available The paper presents the tensions between collectivist and corporatist forms of ownership for Romanian mutual funds. Drawing on my research among retail investors of funds that ended up in bankruptcy throughout the postsocialist period, I document the material practices and graphic artefacts they deploy in litigation as ways to make claims and produce evidence regarding their ongoing financial involvement and the rights to compensations. I focus specifically on the files documenting their personal histories (providing moral reasons for pursuing “speculative” investments as well as those materializing the memory of their involvement with the capital market. I conclude that material practices are constitutive of vernacular forms of financial and legal knowledge. Furthermore, they engender specific types of property that serve as premises for the defense of investor rights and as grounds for emerging forms of collective action. Methodologically, the conclusion of the paper is that qualitative methods constitute alternative approaches and a valuable complement of quantitate research methods for the behaviors of mutual fund investors illustrating some of the cultural components giving specific dynamics to the popular participation to the capital market that can be subsequently quantified.

  18. Field-Flow Fractionation of Carbon Nanotubes and Related Materials

    Energy Technology Data Exchange (ETDEWEB)

    John P. Selegue

    2011-11-17

    During the grant period, we carried out FFF studies of carbonaceous soot, single-walled and multi-walled carbon nanotubes, carbon nano-onions and polyoxometallates. FFF alone does not provide enough information to fully characterize samples, so our suite of characterization techniques grew to include light scattering (especially Photon Correlation Spectroscopy), scanning and transmission electron microscopy, thermogravimetric analysis and spectroscopic methods. We developed convenient techniques to deposit and examine minute FFF fractions by electron microscopy. In collaboration with Arthur Cammers (University of Kentucky), we used Flow Field-Flow Fractionation (Fl-FFF) to monitor the solution-phase growth of keplerates, a class of polyoxometallate (POM) nanoparticles. We monitored the evolution of Mo-POM nanostructures over the course of weeks by by using flow field-flow fractionation and corroborated the nanoparticle structures by using transmission electron microscopy (TEM). Total molybdenum in the solution and precipitate phases was monitored by using inductively coupled plasma analyses, and total Mo-POM concentration by following the UV-visible spectra of the solution phase. We observe crystallization-driven formation of (Mo132) keplerate and solution phase-driven evolution of structurally related nanoscopic species (3-60 nm). FFF analyses of other classes of materials were less successful. Attempts to analyze platelets of layered materials, including exfoliated graphite (graphene) and TaS2 and MoS2, were disappointing. We were not able to optimize flow conditions for the layered materials. The metal sulfides react with the aqueous carrier liquid and settle out of suspension quickly because of their high density.

  19. Materials comprising polydienes and hydrophilic polymers and related methods

    Science.gov (United States)

    Mays, Jimmy W [Knoxville, TN; Deng, Suxiang [Knoxville, TN; Mauritz, Kenneth A [Hattiesburg, MS; Hassan, Mohammad K [Hattiesburg, MS; Gido, Samuel P [Hadley, MA

    2011-11-22

    Materials prepared from polydienes, such as poly(cyclohexadiene), and hydrophilic polymers, such as poly(alkylene oxide), are described. Methods of making the materials and their use in fuel cell membranes, batteries, breathable chemical-biological protective materials, and templates for sol-gel polymerization are also provided. The materials can be crosslinked and sulfonated, and can include copolymers and polymer blends.

  20. Status of experimental data related to Be in ITER materials R and D data bank

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Shigeru [ITER Joint Central Team, Muenchen (Germany)

    1998-01-01

    To keep traceability of many valuable raw data that were experimentally obtained in the ITER Technology R and D Tasks related to materials for In-Vessel components (divertor, first wall, blanket, vacuum vessel, etc.) and to easily make the best use of these data in the ITER design activities, the `ITER Materials R and D Data Bank` has been built up, with the use of Excel{sup TM} spread sheets. The paper describes status of experimental data collected in this data bank on thermo-mechanical properties of unirradiated and neutron irradiated Be, on plasma-material interactions of Be, on mechanical properties of various kinds of Be/Cu joints (including plasma sprayed Be), and on thermal fatigue tests of Be/Cu mock-ups. (author)

  1. [Children, Collect Bones! : Teaching Aids and Propaganda Material on Bone-Collections and Bone-Utilisation Used in German Schools During the "Third Reich"].

    Science.gov (United States)

    Vaupel, Elisabeth; Preiß, Florian

    2018-06-05

    In the nineteenth and early twentieth centuries bones were an essential raw material for the German chemical industry, vital to the production of fertilizer, glue, gelatine, soap and other products. As most of this material was imported, the German school system during the "Third Reich" took the utilisation of bones as an example to illustrate the relevance of the four-year plan of 1936 and its policy of economic self-sufficiency. The school children were encouraged to collect bones from domestic sources and bring them to the collecting points in the schools. Several NS-institutions developed a variety of teaching aids and materials to support school education on this economically and politically important topic. Focussing on the example of bone-utilisation, this paper examines the messages and intentions of these educational materials. It also demonstrates how even apparently ideologically unbiased school subjects, such as chemistry, were instrumentalised for the political indoctrination of the pupils.

  2. Bacillus thuringiensis in caterpillars and associated materials collected from protected tropical forests in northwestern Costa Rica.

    Science.gov (United States)

    Rodríguez-Sánchez, César; Sittenfeld, Ana; Janzen, Daniel H; Espinoza, Ana M

    2006-06-01

    Bacillus thuringiensis (Bt) synthesizes crystalline inclusions that are toxic to caterpillars (Lepidoptera) and other orders of invertebrates. Materials associated with 37 caterpillars from 16 species, collected while feeding on 15 different species of host plants in dry, cloud and rain forests located in the Area de Conservación Guanacaste in northwestern Costa Rica, were examined for the presence of Bt. From a total of 101 derived samples, 25 Bt isolates were cultured: 56% from host plant leaves, 8% from caterpillar guts and 36% from caterpillar fecal pellets. Bt was isolated from at least one sample in 38% of the systems constituted by the food plant, gut and fecal pellets corresponding to a single caterpillar. Four different morphologies of crystalline inclusions were observed, with bipyramidal and irregular crystal morphologies being the most prevalent.

  3. Strong coupling of collection of emitters on hyperbolic meta-material

    Science.gov (United States)

    Biehs, Svend-Age; Xu, Chenran; Agarwal, Girish S.

    2018-04-01

    Recently, considerable effort has been devoted to the realization of a strong coupling regime of the radiation matter interaction in the context of an emitter at a meta surface. The strong interaction is well realized in cavity quantum electrodynamics, which also show that strong coupling is much easier to realize using a collection of emitters. Keeping this in mind, we study if emitters on a hyperbolic meta materials can yield a strong coupling regime. We show that strong coupling can be realized for densities of emitters exceeding a critical value. A way to detect strong coupling between emitters and hyperbolic metamaterials is to use the Kretschman-Raether configuration. The strong coupling appears as the splitting of the reflectivity dip. In the weak coupling regime, the dip position shifts. The shift and splitting can be used to sense active molecules at surfaces.

  4. Reuse of materials from recyclable-waste collection for road building

    International Nuclear Information System (INIS)

    Messineo, A.; Panno, D.; Ticali, D.

    2006-01-01

    A right policy of waste management should look to nature: in fact in nature nothing of produced is lost; everything could be considered food to energy resource for another subject. A diffusion of right policy of waste reuse is the leit motive of this study. Heavy problem of pollution and the protection of the natural environment, is the one of the most important problem of this society, and so to think waste to reuse for civil engineering research has a double aim: a) to reduce quantity to send to dump; b) to reuse good materials for civil engineering building, as substitute of natural aggregate. It look very innovative and actual to think to possibility of reuse glass from recyclable-waste collection for road building, and so we could consider road as a valid substitute to dump. The aim is to consider waste as an element with high energetic power and value added [it

  5. VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials. Collection of materials

    International Nuclear Information System (INIS)

    Tsvetkov, Yu.V.

    2010-01-01

    The materials of the VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials, held 8-11 November 2010 in Moscow, are presented. Structure and properties of high-strength nanostructured metal and composite materials, development of research methods and simulation of the structure and properties of materials and nanomaterials, functional ceramic and composite nanomaterials - in sight of the participants. The problems of physicochemical principles and processes for new technologies and forming powder materials and nanomaterials, physicochemical bases of production and processing of advanced inorganic materials, physical chemistry and technology of energy-, resource-saving and environmentally friendly processes for ferrous, non-ferrous and rare metals are under consideration. Promising composite coatings and nanostructured films of functional purposes, physicochemical bases of new processes of shaping and forming of materials and nanomaterials are discussed [ru

  6. Parental separation and adult psychological distress: an investigation of material and relational mechanisms.

    Science.gov (United States)

    Lacey, Rebecca E; Bartley, Mel; Pikhart, Hynek; Stafford, Mai; Cable, Noriko

    2014-03-23

    An association between parental separation or divorce occurring in childhood and increased psychological distress in adulthood is well established. However relatively little is known about why this association exists and how the mechanisms might differ for men and women. We investigate why this association exists, focussing on material and relational mechanisms and in particular on the way in which these link across the life course. This study used the 1970 British Cohort Study (n=10,714) to investigate material (through adolescent and adult material disadvantage, and educational attainment) and relational (through parent-child relationship quality and adult partnership status) pathways between parental separation (0-16 years) and psychological distress (30 years). Psychological distress was measured using Rutter's Malaise Inventory. The inter-linkages between these two broad mechanisms across the life course were also investigated. Missing data were multiply imputed by chained equations. Path analysis was used to explicitly model prospectively-collected measures across the life course, therefore methodologically extending previous work. Material and relational pathways partially explained the association between parental separation in childhood and adult psychological distress (indirect effect=33.3% men; 60.0% women). The mechanisms were different for men and women, for instance adult partnership status was found to be more important for men. Material and relational factors were found to interlink across the life course. Mechanisms acting through educational attainment were found to be particularly important. This study begins to disentangle the mechanisms between parental separation in childhood and adult psychological distress. Interventions which aim to support children through education, in particular, are likely to be particularly beneficial for later psychological health.

  7. Treatment, material, care, and patient-related factors in contact lens-related dry eye.

    Science.gov (United States)

    Ramamoorthy, Padmapriya; Sinnott, Loraine T; Nichols, Jason J

    2008-08-01

    To examine the effect of general contact lens and material characteristics, care solutions, treatment, and patient-related factors on contact lens-related dry eye. The data were derived from the Contact Lens and Dry Eye Study, designed as a cross-sectional and nested case-control study including 360 subjects. In separate statistical models, logistic regression was used to examine general contact lens characteristics, specific hydrogel lens materials, care solutions, and patient-related factors associated with dry eye status (controlled for age, gender, and current treatments). Several factors were significantly associated with dry eye, including treatment factors such as a recent contact lens refitting (odds ratios [OR] = 5.75, 95% confidence intervals [CI] = 2.14 to 15.46) and use of artificial tears/rewetting drops (OR = 1.09, 95% CI = 1.02 to 1.16), in addition, currently worn materials including Food and Drug Administration (FDA) group II (OR = 2.98, 95% CI = 1.14 to 6.19) and IV (OR = 1.87, 95% CI = 1.08 to 3.24). Significant patient-related factors included decreased overall satisfaction (OR = 3.57, 95% CI = 2.08 to 5.88,), dry eye in the absence of contact lens wear (OR = 6.54, 95% CI = 2.57 to 16.62), reduced daily lens wear duration (OR = 1.16, 95% CI = 1.06 to 1.26), and reduced ability to wear lenses as long as desired (OR = 2.44, 95% CI = 1.30 to 4.54). Care solutions were not associated with contact lens-related dry eye. The strong association of common treatment factors with dry eye status in contact lens wearers suggests that these treatments are not entirely effective. The use of high water content materials was strongly related to dry eye in lens wearers, whereas care solutions were not. Contact lens-related dry eye was also associated with several patient-related factors such as greater ocular discomfort (without lenses), dissatisfaction, and inability to wear lenses for desired durations.

  8. Data collection for the methods of in-pile materials testing

    International Nuclear Information System (INIS)

    Markina, N.V.; Rudkevich, A.V.; Lebedeva, E.E.

    1985-01-01

    Problems, relating to the creation of automated data banks intended for accumulatioon and systematization of data according to the methods of in-pile materials testing, taking into account their specific nature are discussed. The architecture of the bank, realized on the BESM-6 computer is described. The bank contains data on about 300 methods. The library of requests, which may be used by a user comprises about 20 descriptions. A new request description preparation and input take 5-20 min. The system answering time is from 30 sec to 3-4 min

  9. Photonic devices based on black phosphorus and related hybrid materials

    International Nuclear Information System (INIS)

    Vitiello, M.S.; Viti, L.

    2016-01-01

    Artificial semiconductor heterostructures played a pivotal role in modern electronic and photonic technologies, providing a highly effective means for the manipulation and control of carriers, from the visible to the far-infrared, leading to the development of highly efficient devices like sources, detectors and modulators. The discovery of graphene and the related fascinating capabilities have triggered an unprecedented interest in devices based on inorganic two-dimensional (2D) materials. Amongst them, black phosphorus (BP) recently showed an extraordinary potential in a variety of applications across micro-electronics and photonics. With an energy gap between the gapless graphene and the larger gap transition metal dichalcogenides, BP can form the basis for a new generation of high-performance photonic devices that could be specifically engineered to comply with different applications, like transparent saturable absorbers, fast photocounductive switches and low noise photodetectors, exploiting its peculiar electrical, thermal and optical anisotropy. This paper will review the latest achievements in black-phosphorus–based THz photonics and discuss future perspectives of this rapidly developing research field.

  10. The Alliance between Mengu-Timur and Abaga: The Problem of Sources Interpretation and Translation of Persian and Turkic Terms in Arabic Texts (on the example of “Collection of Materials Relating to the Golden Horde History. Volume I. Excerpts from the Arabic Writings” composed by V.G. Tiesenhausen »

    Directory of Open Access Journals (Sweden)

    Damirdzhan Zainuddinov

    2015-01-01

    Full Text Available The article deals with the problem of translation of Persian and Turkic lexical units in Arabic texts written between the 13th and 16th centuries. Author examines as an example an excerpt from the work of Ibn Khaldun (732/1332 – 808/1406 translated by V.G. Tiesenhausen. The author provides comments to the given translation and presents his own translation. The author also presents original analysis of the source both about the relations between Golden Horde and Constantinople and on the battle of Homs in 680 AH between Mangu Timur, son of Hulagu, and the Mamluk sultan al-Mansur. The author tries to prove that Mengu-Timur, son of Togan, did not participate in that war. This article also presents new sources of such authors as Yunini Kutb ad-din Musa ibn Muhammad (640/1242 – 726/1326, Yafi’I Abdulla ibn As’ad (698 – 768 AH and bibliographic collection of al-Markisi Taki ad-din (died in 845 AH.

  11. The Alliance between Mengu-Timur and Abaga: The Problem of Sources Interpretation and Translation of Persian and Turkic Terms in Arabic Texts (on the example of “Collection of Materials Relating to the Golden Horde History. Volume I. Excerpts from the Arabic Writings” composed by V.G. Tiesenhausen »

    Directory of Open Access Journals (Sweden)

    Damirdzhan Zainuddinov

    2015-03-01

    Full Text Available The article deals with the problem of translation of Persian and Turkic lexical units in Arabic texts written between the 13th and 16th centuries. Author examines as an example an excerpt from the work of Ibn Khaldun (732/1332 – 808/1406 translated by V.G. Tiesenhausen. The author provides comments to the given translation and presents his own translation. The author also presents original analysis of the source both about the relations between Golden Horde and Constantinople and on the battle of Homs in 680 AH between Mangu Timur, son of Hulagu, and the Mamluk sultan al-Mansur. The author tries to prove that Mengu-Timur, son of Togan, did not participate in that war. This article also presents new sources of such authors as Yunini Kutb ad-din Musa ibn Muhammad (640/1242 – 726/1326, Yafi’I Abdulla ibn As’ad (698 – 768 AH and bibliographic collection of al-Markisi Taki ad-din (died in 845 AH.

  12. Concise encyclopedia of semiconducting materials and related technologies

    CERN Document Server

    Mahajan, S M

    1992-01-01

    The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layer

  13. Many-Body Theory of Pyrochlore Iridates and Related Materials

    Science.gov (United States)

    Wang, Runzhi

    In this thesis we focus on two problems. First we propose a numerical method for generating optimized Wannier functions with desired properties. Second we perform the state of the art density functional plus dynamical mean-field calculations in pyrochlore iridates, to investigate the physics induced by the cooperation of spin-orbit coupling and electron correlation. We begin with the introduction for maximally localized Wannier functions and other related extensions. Then we describe the current research in the field of spin-orbit coupling and its interplay with correlation effects, followed by a brief introduction of the `hot' materials of iridates. Before the end of the introduction, we discuss the numerical methods employed in our work, including the density functional theory; dynamical mean-field theory and its combination with the exact diagonalization impurity solver. Then we propose our approach for constructing an optimized set of Wannier functions, which is a generalization of the functionality of the classic maximal localization method put forward by Marzari and Vanderbilt. Our work is motivated by the requirement of the effective description of the local subspace of the Hamiltonian by the beyond density functional theory methods. In extensions of density functional theory such as dynamical mean-field theory, one may want highly accurate description of particular local orbitals, including correct centers and symmetries; while the basis for the remaining degrees of freedom is unimportant. Therefore, we develop the selectively localized Wannier function approach which allows for a greater localization in the selected subset of Wannier functions and at the same time allows us to fix the centers and ensure the point symmetries. Applications in real materials are presented to demonstrate the power of our approach. Next we move to the investigation of pyrochlore iridates, focussing on the metal-insulator transition and material dependence in these compounds. We

  14. Some political issues related to future special nuclear materials production

    International Nuclear Information System (INIS)

    Peaslee, A.T. Jr.

    1981-08-01

    The Federal Government must take action to assure the future adequate supply of special nuclear materials for nuclear weapons. Existing statutes permit the construction of advanced defense production reactors and the reprocessing of commercial spent fuel for the production of special materials. Such actions would not only benefit the US nuclear reactor manufacturers, but also the US electric utilities that use nuclear reactors

  15. Readability of Online Patient Education Materials Related to IR.

    Science.gov (United States)

    McEnteggart, Gregory E; Naeem, Muhammad; Skierkowski, Dorothy; Baird, Grayson L; Ahn, Sun H; Soares, Gregory

    2015-08-01

    To assess the readability of online patient education materials (OPEM) related to common diseases treated by and procedures performed by interventional radiology (IR). The following websites were chosen based on their average Google search return for each IR OPEM content area examined in this study: Society of Interventional Radiology (SIR), Cardiovascular and Interventional Radiological Society of Europe (CIRSE), National Library of Medicine, RadiologyInfo, Mayo Clinic, WebMD, and Wikipedia. IR OPEM content area was assessed for the following: peripheral arterial disease, central venous catheter, varicocele, uterine artery embolization, vertebroplasty, transjugular intrahepatic portosystemic shunt, and deep vein thrombosis. The following algorithms were used to estimate and compare readability levels: Flesch-Kincaid Grade Formula, Flesch Reading Ease Score, Gunning Frequency of Gobbledygook, Simple Measure of Gobbledygook, and Coleman-Liau Index. Data were analyzed using general mixed modeling. On average, online sources that required beyond high school grade-level readability were Wikipedia (15.0), SIR (14.2), and RadiologyInfo (12.4); sources that required high school grade-level readability were CIRSE (11.3), Mayo Clinic (11.0), WebMD (10.6), and National Library of Medicine (9.0). On average, OPEM on uterine artery embolization, vertebroplasty, varicocele, and peripheral arterial disease required the highest level of readability (12.5, 12.3, 12.3, and 12.2, respectively). The IR OPEM assessed in this study were written above the recommended sixth-grade reading level and the health literacy level of the average American adult. Many patients in the general public may not have the ability to read and understand health information in IR OPEM. Copyright © 2015 SIR. Published by Elsevier Inc. All rights reserved.

  16. Survey of reference materials. V. 2: Environmentally related reference materials for trace elements, nuclides and microcontaminants

    International Nuclear Information System (INIS)

    1996-05-01

    The present report presently contains over 250 reference materials with trace element and organic contaminant information on fuel, geological and mineral, anthropogenic disposal, soil reference and miscellaneous reference materials. Not included in the current report is information on most biological and environmental reference materials with trace element, stable isotope, radioisotope and organic contaminant information. 8 refs, tabs

  17. Regulations related to the transport of radioactive material in Brazil

    International Nuclear Information System (INIS)

    Sahyun, Adelia; Sordi, Gian-Maria A.A.; Sanches, Matias P.

    2001-01-01

    The transport of radioactive material has raised great interest on the part of national regulatory authorities, thus resulting in a safety measures improvement for all kinds of transportation. The transport of radioactive material is regulated by safety criteria much more than those applied to conventional hazardous material. All radioactive material transportation run in Brazilian territory must be in accordance with what is established by the CNEN-NE 5.01 - Transport of Radioactive Material. There are other national and international regulations for radioactive material transportation, which have to be accomplished with and adopted during the operation of radioactive material transportation. The aim of this paper is to verify the criteria set up in the existing regulations and propose a consensus for all the intervening organizations in the regulation process for land, air or sea transportation. This kind of transportation can not depend on the efforts of only one person, a group of workers or even any governmental body, but must be instead a shared responsibility among workers, transport firms and all regulative transportation organizations. (author)

  18. Regulations related to the transport of radioactive material in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Sahyun, Adelia; Sordi, Gian-Maria A.A. [ATOMO Radioprotecao e Seguranca Nuclear, Sao Paulo, SP (Brazil)]. E-mail: atomo@atomo.com.br; Sanches, Matias P. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: msanches@net.ipen.br

    2001-07-01

    The transport of radioactive material has raised great interest on the part of national regulatory authorities, thus resulting in a safety measures improvement for all kinds of transportation. The transport of radioactive material is regulated by safety criteria much more than those applied to conventional hazardous material. All radioactive material transportation run in Brazilian territory must be in accordance with what is established by the CNEN-NE 5.01 - Transport of Radioactive Material. There are other national and international regulations for radioactive material transportation, which have to be accomplished with and adopted during the operation of radioactive material transportation. The aim of this paper is to verify the criteria set up in the existing regulations and propose a consensus for all the intervening organizations in the regulation process for land, air or sea transportation. This kind of transportation can not depend on the efforts of only one person, a group of workers or even any governmental body, but must be instead a shared responsibility among workers, transport firms and all regulative transportation organizations. (author)

  19. Materials removal by water jets with high relative velocity

    International Nuclear Information System (INIS)

    Schikorr, W.

    1986-01-01

    By way of introduction approaches to the systematic apprehension of the material removal by water jets up to 1000 bar are made. In drilling experiments the effects of jet dynamic are studied, using the controlled disintegration of the jet. Using model-layer-systems the removal of layers by the 'natural' disintegrating fluid-jet is examined. The mechanisms of material removal and the consequences on the praxis of cleaning are discussed. A concept to measure specially the effects of the dynamic jet components is developed. In conclusion aspects of progress in this methods of material removal are discussed. (orig.) [de

  20. Relationship of birth order and the marketing-related variable of materialism.

    Science.gov (United States)

    Zemanek, J E; Claxton, R P; Zemanek, W H

    2000-04-01

    The relationship between the birth order and materialism scores was investigated using materialism conceptualized as a consumer value. Data were collected from 275 alumni of a major southwestern university. The analysis indicated that first-borns in this sample scored significantly lower on materialism than younger siblings.

  1. An effective method of collecting practical knowledge by presentation of videos and related words

    Directory of Open Access Journals (Sweden)

    Satoshi Shimada

    2017-12-01

    Full Text Available The concentration of practical knowledge and experiential knowledge in the form of collective intelligence (the wisdom of the crowd is of interest in the area of skill transfer. Previous studies have confirmed that collective intelligence can be formed through the utilization of video annotation systems where knowledge that is recalled while watching videos of work tasks can be assigned in the form of a comment. The knowledge that can be collected is limited, however, to the content that can be depicted in videos, meaning that it is necessary to prepare many videos when collecting knowledge. This paper proposes a method for expanding the scope of recall from the same video through the automatic generation and simultaneous display of related words and video scenes. Further, the validity of the proposed method is empirically illustrated through the example of a field experiment related to mountaineering skills.

  2. Toward a comprehensive approach to the collection and analysis of pica substances, with emphasis on geophagic materials.

    Directory of Open Access Journals (Sweden)

    Sera L Young

    2008-09-01

    Full Text Available Pica, the craving and subsequent consumption of non-food substances such as earth, charcoal, and raw starch, has been an enigma for more than 2000 years. Currently, there are little available data for testing major hypotheses about pica because of methodological limitations and lack of attention to the problem.In this paper we critically review procedures and guidelines for interviews and sample collection that are appropriate for a wide variety of pica substances. In addition, we outline methodologies for the physical, mineralogical, and chemical characterization of these substances, with particular focus on geophagic soils and clays. Many of these methods are standard procedures in anthropological, soil, or nutritional sciences, but have rarely or never been applied to the study of pica.Physical properties of geophagic materials including color, particle size distribution, consistency and dispersion/flocculation (coagulation should be assessed by appropriate methods. Quantitative mineralogical analyses by X-ray diffraction should be made on bulk material as well as on separated clay fractions, and the various clay minerals should be characterized by a variety of supplementary tests. Concentrations of minerals should be determined using X-ray fluorescence for non-food substances and inductively coupled plasma-atomic emission spectroscopy for food-like substances. pH, salt content, cation exchange capacity, organic carbon content and labile forms of iron oxide should also be determined. Finally, analyses relating to biological interactions are recommended, including determination of the bioavailability of nutrients and other bioactive components from pica substances, as well as their detoxification capacities and parasitological profiles.This is the first review of appropriate methodologies for the study of human pica. The comprehensive and multi-disciplinary approach to the collection and analysis of pica substances detailed here is a necessary

  3. A guide to archival collections relating to radioactive fallout from nuclear weapon testing

    International Nuclear Information System (INIS)

    1989-10-01

    This guide has been prepared by professional historians who have a working knowledge of many of the record collections, included in the following pages. In describing materials, they have tried to include enough information so that persons unfamiliar with the complexities of large record systems will be able to determine the nature of the information in, and the quality of, each record collection. The guide is organized alphabetically by the means of the record repositories, not by the organizations which have custody of the records. It should be noted that arrangement by location does not reveal at a single glance all of the materials that may have originated in a specific laboratory, research center, or government agency. For example, records originated in one of the Atomic Energy Commission's national laboratories may, in some cases, be listed under the Federal Records Centers to which they have been retired. Thus, this guide includes an index of agencies originating documents and pages listing those agencies

  4. The Development of Digital Collections and Resources Organization Related Projects in Taiwan

    Directory of Open Access Journals (Sweden)

    Hsueh-Hua Chen

    2001-12-01

    Full Text Available With the development of Internet, digital libraries/museums have received worldwide attention and many developed countries are doing extensive researches on digital libraries/museums. In Taiwan, many institutions have digitized their rare collections. This paper introduces the recent development of digital projects in Taiwan, including: Digital Museum Project, National Digital Collection Project and National Culture Database Project, and also especially introduces some resources organization related projects. [Article content in Chinese

  5. On criteria for algebraic independence of collections of functions satisfying algebraic difference relations

    Directory of Open Access Journals (Sweden)

    Hiroshi Ogawara

    2017-01-01

    Full Text Available This paper gives conditions for algebraic independence of a collection of functions satisfying a certain kind of algebraic difference relations. As applications, we show algebraic independence of two collections of special functions: (1 Vignéras' multiple gamma functions and derivatives of the gamma function, (2 the logarithmic function, \\(q\\-exponential functions and \\(q\\-polylogarithm functions. In a similar way, we give a generalization of Ostrowski's theorem.

  6. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When..., paint-related material, adhesives, ink and resins must be packaged as follows: (1) As prescribed in...

  7. Issues related to the use of genetic material and information.

    Science.gov (United States)

    Giarelli, E; Jacobs, L A

    2000-04-01

    To review issues regarding the use of genetic materials and information. Professional literature, regional and federal legislation. An analysis is provided of the relationship among advances in genetic technology, use of genetic material and information, and the development of laws that protect the interests of donors, researchers, and insurers. Rapid technological achievements have generated complex questions that are difficult to answer. The Human Genome Project began and the scientific discoveries were put to use before adequate professional and public debate on the ethical, legal, social, and clinical issues. The term "proper use" of genetic material and information is not defined consistently. An incomplete patchwork of protective state and federal legislation exists. Many complicated issues surround the use and potential misuse of genetic material and information. Rapidly advancing technology in genetics makes it difficult for regulations that protect individuals and families to keep pace. Oncology nurses need to recognize their role as change agents, understand genetic technology, and advocate for patients by participating in the debate on the proper use and prevention of misuse of genetic material and information.

  8. Bacillus thuringiensis in caterpillars and associated materials collected from protected tropical forests in northwestern Costa Rica

    Directory of Open Access Journals (Sweden)

    César Rodríguez-Sánchez

    2006-06-01

    Full Text Available Bacillus thuringiensis (Bt synthesizes crystalline inclusions that are toxic to caterpillars (Lepidoptera and other orders of invertebrates. Materials associated with 37 caterpillars from 16 species, collected while feeding on 15 different species of host plants in dry, cloud and rain forests located in the Área de Conservación Guanacaste in northwestern Costa Rica, were examined for the presence of Bt. From a total of 101 derived samples, 25 Bt isolates were cultured: 56% from host plant leaves, 8% from caterpillar guts and 36% from caterpillar fecal pellets. Bt was isolated from at least one sample in 38% of the systems constituted by the food plant, gut and fecal pellets corresponding to a single caterpillar. Four different morphologies of crystalline inclusions were observed, with bipyramidal and irregular crystal morphologies being the most prevalent. Rev. Biol. Trop. 54(2: 265-271. Epub 2006 Jun 01.Bacillus thuringiensis (Bt sintetiza inclusiones cristalinas que resultan tóxicas para algunas larvas de lepidópteros y otros órdenes de invertebrados. Su presencia fue examinada en materiales asociados a 37 orugas de mariposas de 16 especies, las cuales fueron colectadas mientras se alimentaban en 15 especies diferentes de plantas hospederas en bosques secos, nubosos y húmedos localizados dentro del Área de Conservación Guanacaste (ACG en el noroeste de Costa Rica. A partir de un total de 101 muestras se obtuvo 25 aislamientos de Bt: 56% a partir de material foliar de las plantas hospederas, 8% a partir del contenido intestinal de las larvas y 36% a partir de sus excrementos. Esta bacteria fue cultivada a partir de al menos uno de los 3 diferentes tipos de muestra asociados a una oruga particular (planta hospedera, intestino, excremento en 38% de los casos posibles. En la colección de aislamientos obtenida se observaron cuatro morfologías de inclusiones cristalinas, siendo aquellas bipiramidales e irregulares las más prevalentes.

  9. The inhalation of radioactive materials as related to hand contamination

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, J.C.; Rohr, R.C.

    1953-09-15

    Tests performed to determine the hazard associated with the inhalation of radioactive materials as the result of smoking with contaminated hands indicate that for dry uranium compounds adhering to the palmar surfaces of the hands, approximately 1.0% of the material may be transferred to a cigarette, and that of this approximately 0.2% may appear in the smoke which is inhaled. Most of the contamination originally placed in a cigarette was found in the ash, and only 11% of the material was not recovered following burning; approximately half of this loss may be attributed to normal losses inherent in the analytical process, the recovery efficiency for which was found by supplementary experiments to be 95%.

  10. Potential SSP Perfluorooctanoic Acid Related Fluoropolymer Materials Obsolescence

    Science.gov (United States)

    Segars, Matt G.

    2006-01-01

    The Shuttle Environmental Assurance Initiative (SEA) has identified a potential for the Space Shuttle Program (SSP) to incur materials obsolescence issues due to agreements between the fluoro-chemical industry and the United States Environmental Protection Agency (USEPA) to participate in a Global Stewardship Program for perfluorooctanoic acid (PFOA). This presentation will include discussions of the chemistry, regulatory drivers, affected types of fluoropolymer and fluoroelastomer products, timeline for reformulations, and methodology for addressing the issue. It will cover the coordination of assessment efforts with the International Space Station and Head Quarters Air Force Space Command, along with some examples of impacted materials. The presentation is directed at all members of the international aerospace community concerned with identifying potential environmentally driven materials obsolescence issues.

  11. New Directions for Academic Video Game Collections: Strategies for Acquiring, Supporting, and Managing Online Materials

    Science.gov (United States)

    Robson, Diane; Durkee, Patrick

    2012-01-01

    The work of collection development in academic video game collections is at a crucial point of transformation--gaming librarians are ready to expand beyond console games collected in disc and cartridge format to the world of Internet games. At the same time, forms and genres of video games such as serious and independent games are increasingly…

  12. Tritium-related materials problems in fusion reactors

    International Nuclear Information System (INIS)

    Hickman, R.G.

    1976-01-01

    Pressing materials problems that must be solved before tritium can be used to produce energy economically in fusion reactors are discussed. The following topics are discussed: (1) breeding tritium, (2) recovering bred tritium, (3) containing tritium, (4) fuel recycling, and (5) laser-fusion fueling

  13. What should Marxism materialism propose to International Relations?

    Directory of Open Access Journals (Sweden)

    Egni Malo

    2014-07-01

    Full Text Available To argue for the acknowledgment of the importance of historical materialism today when the cold-war and communism have for more than two decades ceased to exist it might create the perception of appearing dejected. Yet such a task which we attempt to take in this work is possible, if only because of the way that our actuality has depicted itself. One can argue for example that the significance of historical materialism as an elucidating method was never reliant on the success of the authoritarian regimes of communism that gave it a face of their own, any more than has traditional conservatism been dependent on social Darwinism, racist or/and aggressive regimes. Beyond this indication we argue of the possibility that historical materialism can be recognised as explanatory system, as one that in derivation and maturity has as its focus of analysis and particularly lays emphasis on what more than ever before governs our social world today, capitalism. The cold war proved the ground or rather the fit for concealing the social and economic divide and made that division namely in competing strategic interest: with the failure of communism and the freeing of historical materialism itself, IR might as well accept the degree to which socio-economic issues determined its agenda and policy of the west.

  14. Common data elements collected among universities for sport-related concussion studies.

    Science.gov (United States)

    Yang, Jingzhen; Peek-Asa, Corinne; Noble, James M; Torner, James; Schmidt, Paul; Cooper, Martha L

    2018-02-12

    Universities are increasingly implementing programs to effectively respond to and manage sport-related concussions (SRCs). One such effort is to develop common data elements (CDEs) and standardize data collection methods. The objectives of this study were to describe CDEs currently collected by Big Ten and Ivy League universities for SRC studies, and to compare the data collected with the core CDEs recommended by the National Institute of Neurological Disorders and Stroke (NINDS). We conducted an anonymous cross-sectional online survey among medical staff at the 14 Big Ten and 8 Ivy League universities (one per university) between September and October 2015. The survey instrument, including 9 questions corresponding to the concussion data collected before, during, and after a concussion, was developed and pilot-tested before field use. We analyzed patterns of the concussion CDEs being collected, including when, what, and how the data were collected and stored, and compared them with the NINDS' recommended core CDEs. A total of 19 out of 22 universities were included, with 13 from Big Ten and 6 from Ivy-League universities. All 19 participating universities currently collected concussion data with athletes before, during, and after a concussion. Great similarities in data collection were observed at baseline and acutely post-concussion across participating universities. All 19 universities collected at least one of the ten recommended acute symptoms checklists, and 18 universities collected one of the four recommended core neuropsychological function cognitive measures. However, CDEs in the sub-acute and chronic timeframes were limited, with only 9 (47%) universities collecting post-concussion short to long term outcome data. While over 60% of universities collected and stored concussion data electronically, only 17% to 42% of data collected were readily available for research. Significant inter-institutional similarities in acute concussion CDEs were found. Further

  15. The Relative Impact of Aligning Tier 2 Intervention Materials with Classroom Core Reading Materials in Grades K-2

    Science.gov (United States)

    Foorman, Barbara R.; Herrera, Sarah; Dombek, Jennifer

    2018-01-01

    This randomized controlled trial in 55 low-performing schools across Florida compared 2 early literacy interventions--1 using stand-alone materials and 1 using materials embedded in the existing core reading/language arts program. A total of 3,447 students who were below the 30th percentile in vocabulary and reading-related skills participated in…

  16. Social Relations at the Collective Level: The Meaning and Measurement of Collective Control in Research on the Psychosocial Work Environment

    Directory of Open Access Journals (Sweden)

    Per Øystein Saksvik

    2013-09-01

    Full Text Available In this article, we suggest that organizational-level social relations should be defined and measured as workplace norms. We base this argument on new research on the components of the psychosocial work environment and on the availability of new techniques for measuring and analyzing workplace norms as organizational properties. Workplace norms emerge from interactions and negotiations among organizational actors, through which patterns of behavior, attitudes, and perspectives become defined as legitimate. This is an underestimated dimension of the psychosocial work environment that should be assessed with two types of data: self-reports by employees of their experiences in the workplace (task-level control and self-reports by employees and employers of collective or group-level norms. Hierarchical linear modeling is an especially useful tool for analyzing the relationships between workplace norms and different organizational outcomes because it allows researchers to separate the effects of individual-level variables from group or organizational-level factors. Our approach is anchored in the Nordic perspective of the work environment developed over the past 50 years.

  17. Like father, Like Son? Collective decisions taking into account family relations

    Directory of Open Access Journals (Sweden)

    Ariádne Scalfoni Rigo

    2018-01-01

    Full Text Available This teaching case aims to promote reflection on other possible economic actions and alternative management models based on proximity relations. It presents a real situation in a community in the interior of Bahia, experienced by a Community Development Bank, which is an innovative experience on solidarity financing in Brazil and worldwide, related to a credit request by a certain Mr. Francisco. In order to protect his son, Pedro, Francisco created a dilemma that Ms. Marta, the credit agent of the Community Development Bank, sought to solve within the Credit Analysis Committee, a collective decision-making structure based on neighborhood relations.  The decision was not easy and involved many variables. This case allows to discuss the influence of community relations on solidarity finances, in collective management structures, and in the dynamics of Community Development Banks.

  18. 78 FR 5828 - Agency Information Collection Activities: Petition To Classify Orphan as an Immediate Relative...

    Science.gov (United States)

    2013-01-28

    ...-0028] Agency Information Collection Activities: Petition To Classify Orphan as an Immediate Relative, Form I-600; Application for Advance Processing of Orphan Petition, Form I-600A; Listing of Adult Member... are encouraged and will be accepted until February 27, 2013. This process is conducted in accordance...

  19. Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility

    Energy Technology Data Exchange (ETDEWEB)

    Olinger, Becky D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Moran, Jesse S. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Shelley, Timothy J. [Air Force Research Lab. (AFRL), Tyndall AFB, FL (United States); Whinnery, LeRoy L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whipple, Richard E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kashgarian, Michaele [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-01-14

    Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have been consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.

  20. The Individual and the Collective: Sociological Influences on Lacan's Concept of the Relation Subject—Other

    Science.gov (United States)

    Schrans, David

    2018-01-01

    In this conceptual analysis we discuss the sociological influences on Lacan's conceptualization of the relation between the subject and the other. In his writings predating World War II Lacan defines this relation in terms of identification. However, from 1953 onward he defines it in terms of the subject of speech and the Symbolic Other. It is a popular notion to characterize this change in terms of a radical breach, influenced by the reading of Lévi-Strauss. However, through a close reading of both Lacan's early writings and their Durkheimian influences we will demonstrate that what has changed, is Lacan's conceptualization of the relation between the individual and the collective. This change was gradual rather than sudden. Moreover, it can be situated within the theoretical evolution of the contiguous fields of sociology, anthropology and psychoanalysis. Thus we reject the idea of a breach within his own thought and with what came before him. We will establish our point through a summary of how the relation between the individual and the collective was theorized before Lacan. Durkheim conceptualized this relation as dual: the individual and the collective are radically separated. Mauss attempted to unify the field of anthropology through the holistic concept of the total man. In Lévi-Straus's formalization the individual becomes a function within a structured, Symbolic system. Finally, a reading of Lacan's publications concerning the notion of the logic of the collective will testify to his attempts at formulating a notion of the subject that asserts itself against this collective while at the same time retaining its nature of a logical function. This is the conundrum that Lacan will confront time and again throughout his teachings. Lévi-Strauss merely provided him with the methodological tools of structural anthropology that helped him refine the interrogations that he had already begun. PMID:29867625

  1. The Individual and the Collective: Sociological Influences on Lacan's Concept of the Relation Subject-Other.

    Science.gov (United States)

    Schrans, David

    2018-01-01

    In this conceptual analysis we discuss the sociological influences on Lacan's conceptualization of the relation between the subject and the other. In his writings predating World War II Lacan defines this relation in terms of identification. However, from 1953 onward he defines it in terms of the subject of speech and the Symbolic Other. It is a popular notion to characterize this change in terms of a radical breach, influenced by the reading of Lévi-Strauss. However, through a close reading of both Lacan's early writings and their Durkheimian influences we will demonstrate that what has changed, is Lacan's conceptualization of the relation between the individual and the collective. This change was gradual rather than sudden. Moreover, it can be situated within the theoretical evolution of the contiguous fields of sociology, anthropology and psychoanalysis. Thus we reject the idea of a breach within his own thought and with what came before him. We will establish our point through a summary of how the relation between the individual and the collective was theorized before Lacan. Durkheim conceptualized this relation as dual: the individual and the collective are radically separated. Mauss attempted to unify the field of anthropology through the holistic concept of the total man. In Lévi-Straus's formalization the individual becomes a function within a structured, Symbolic system. Finally, a reading of Lacan's publications concerning the notion of the logic of the collective will testify to his attempts at formulating a notion of the subject that asserts itself against this collective while at the same time retaining its nature of a logical function. This is the conundrum that Lacan will confront time and again throughout his teachings. Lévi-Strauss merely provided him with the methodological tools of structural anthropology that helped him refine the interrogations that he had already begun.

  2. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  3. Relation between physicomechanical properties and diffusion phenomena in composite materials

    International Nuclear Information System (INIS)

    Nicaise, E.

    1984-06-01

    One of the procedures for storing low and medium activity nuclear waste consists of coating the contaminated material in a thermosetting resin. The drums thus constitued are stored in concreted underground trenches, then covered with cement, bitumen or clayey soil. Although the risk of water circulation is low, this element represents on the one hand the major cause of natural deterioration of the polymer, and on the other hand the most likely vehicle for conveying the radioactive ions confined in the drums. It is for this reason that the study of the behaviour of polyester or epoxide-based macromolecular materials with regard to water constitutes the first stage of this work. The second part of the thesis is directed towards the study of compound materials. Indeed, the charges are represented in the first case by the nuclear waste itself; in the second case, they are introduced into the polymer beforehand, on the one hand to reduce costs, and on the other hand to give the mixture suitable mechanical and rheological properties. In this study, three types of mineral charge are added in an epoxide resin: glass balls surface-treated or not, and sand. Various techniques are implemented in order to assess and characterize the interfacial adhesion, in the different systems. The strongest polymer-charge bonds are sought in order to resist natural deterioration. Finally, the object of the confinement process, is to avoid dispersion of low and medium activity substances ( 137 Cs, 90 Sr, 60 Co, 106 Ru..) in the environment. The final stage of this work therefore consists in assessing the barrier qualities of pure or charged polymers with regard to radioactive ion diffusion. We will show in particular that the use of fine resin membranes enables the diffusion coefficient of the 137 Cs to be calculated [fr

  4. Material relating to the Chernobyl accident submitted by Belarus

    International Nuclear Information System (INIS)

    1996-01-01

    This material contains attachments provided by the Resident Representative of Belarus to the IAEA, who has requested that it be circulated to member states in connection with the First International Conference of the European Commission, Belarus, the Russian Federation and Ukraine on the consequences of the Chernobyl Accident held in Minsk held from 18 to 22 March 1996. The paper discusses the environmental and health effect of the accident and efforts made to assess and rehabilitate the environmental consequences. One of the obvious effect presented is a significant increase in incidence of thyroid cancer in children and adolescents

  5. 77 FR 38395 - Agency Information Collection Activities (Advertising, Sales, and Enrollment Materials, and...

    Science.gov (United States)

    2012-06-27

    ... Activities (Advertising, Sales, and Enrollment Materials, and Candidate Handbooks) Under OMB Review AGENCY... correspondence. FOR FURTHER INFORMATION OR A COPY OF THE SUBMISSION CONTACT: Denise McLamb, Enterprise Records....'' SUPPLEMENTARY INFORMATION: Title: Advertising, Sales, and Enrollment Materials, and Candidate Handbooks, 38 CFR...

  6. Multielement analysis of foods and related materials by NAA

    International Nuclear Information System (INIS)

    Cunningham, W.C.; Anderson, D.L.

    1992-01-01

    This paper presents FDA's use of prompt- and delayed-gamma thermal neutron activation analysis (PGAA and INAA, respectively), collectively referred to here is NAA, for the analysis of foods. Several elements of nutritional or toxicological importance can be simultaneously determined at levels ranging from trace to percent. Concentrations of aluminum, boron, bromine, calcium, chlorine, hydrogen, potassium, magnesium, manganese, nitrogen, sodium, and sulfur can be determined in < 1 day in most foods. For INAA, after a few weeks of decay following irradiation, cobalt, cesium, iron, rubidium, scandium, and zinc can also be determined. Other elements that are detectable in only some food types include cadmium, chromium, copper, iodine, phosphorus, antimony, selenium, titanium, and vanadium

  7. Sapphire: a better material for atomization and in situ collection of silver volatile species for atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Musil, Stanislav, E-mail: stanomusil@biomed.cas.cz; Matoušek, Tomáš; Dědina, Jiří

    2015-06-01

    Sapphire is presented as a high temperature and corrosion resistant material of an optical tube of an atomizer for volatile species of Ag generated by the reaction with NaBH{sub 4}. The modular atomizer design was employed which allowed to carry out the measurements in two modes: (i) on-line atomization and (ii) in situ collection (directly in the optical tube) by means of excess of O{sub 2} over H{sub 2} in the carrier gas during the trapping step and vice versa in the volatilization step. In comparison with quartz atomizers, the sapphire tube atomizer provides a significantly increased atomizer lifetime as well as substantially improved repeatability of the Ag in situ collection signals shapes. In situ collection of Ag in the sapphire tube atomizer was highly efficient (> 90%). Limit of detection in the on-line atomization mode and in situ collection mode, respectively, was 1.2 ng ml{sup −1} and 0.15 ng ml{sup −1}. - Highlights: • Sapphire was tested as a new material of an atomizer tube for Ag volatile species. • Two measurement modes were investigated: on-line atomization and in situ collection. • In situ collection of Ag was highly efficient (> 90%) with LOD of 0.15 ng ml{sup −1}. • No devitrification of the sapphire tube observed in the course of several months.

  8. The standardization of data relational mode in the materials database for nuclear power engineering

    International Nuclear Information System (INIS)

    Wang Xinxuan

    1996-01-01

    A relational database needs standard data relation ships. The data relation ships include hierarchical structures and repeat set records. Code database is created and the relational database is created between spare parts and materials and properties of the materials. The data relation ships which are not standard are eliminated and all the relation modes are made to meet the demands of the 3NF (Third Norm Form)

  9. Material Factors in Relation to Development Time in Liquid-Penetrant Inspection. Part 1. Material Factors

    Directory of Open Access Journals (Sweden)

    Irek P.

    2016-06-01

    Full Text Available In technical publications and European Standards the development time (i.e. time of getting out of penetrant from a discontinuity to the material surface in penetration testing is specified within the range of 10-30 minutes. In practice, however, it is seen , that it is closely connected

  10. SISGR: Defect Studies of CZTSSe & Related Thin Film Photovoltaic Materials

    Energy Technology Data Exchange (ETDEWEB)

    Scarpulla, Michael [Univ. of Utah, Salt Lake City, UT (United States)

    2017-03-30

    The research objectives of this project centered around investigations of the basic properties of Cu2ZnSn(S,Se)4 especially the electronic defects in the bulk, at the interface with heterojunction partners used in solar cells, and at the polycrystalline grain boundaries. In the course of the project we addressed many specific sub-areas in 17 peer reviewed publications listed at the end of this report (2 more are also in preparation). The impact of this research is to generate basic but critical materials knowledge about this emerging alloy system that may be capable of photovoltaic efficiency on par with CdTe and CIGS but at lower cost and having the benefit of avoiding constraints on scale-up from rare and expensive elements using earth abundant elements. In the final phase of this project, Prof. Scarpulla worked with Dr. Kirstin Alberi at NREL and rigorously solved a theoretical problem that is general across all semiconductors – the prediction of point defect concentrations in the presence of excess carriers.

  11. Material Assessment for ITER’s Collective Thomson Scattering first mirror

    DEFF Research Database (Denmark)

    Santos, R.; Policarpo, H.; Gonçalves, B.

    2015-01-01

    Element Analysis (FEA) of the mirror over a 400s discharge (reasonable number for computational tests, since an ITER discharge will be between 200 s and 1000 s) , with and without mirror cooling, is performed. The results obtained in this preliminary analysis show that of the tested materials Mo and W....... In this work, three different materials (molybdenum (Mo), stainless steel 316L (SS-316L) and tungsten (W)) are considered for the first mirror of the CTS. The objective is to assess the suitability of these materials for this mirror and to provide a first ranking, considering the neutron radiation loads...... are the most suitable materials for this application, being able to reliably sustain the thermal and structural stresses imposed by the neutron loads....

  12. Mechanics/heat-transfer relation for particulate materials

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, C.S.; Wang, D.G.; Rahman, K.

    1991-11-01

    The original goal of this study was to try and understand the relationship between the thermal and mechanical properties of particulate flows. Two situations were examined. The first is a study of the effects of simple shear flows, as a embryonic flow type on the apparent thermal conductivity and apparent viscosity of a dry granular flow. The second study involved fluidized beds. The original idea was to try and relate the heat transfer behavior of a fluidized bed to the particle pressure,'' the forces by only the particle phase of the two-phase mixture. (VC)

  13. Mechanics/heat-transfer relation for particulate materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, C.S.; Wang, D.G.; Rahman, K.

    1991-11-01

    The original goal of this study was to try and understand the relationship between the thermal and mechanical properties of particulate flows. Two situations were examined. The first is a study of the effects of simple shear flows, as a embryonic flow type on the apparent thermal conductivity and apparent viscosity of a dry granular flow. The second study involved fluidized beds. The original idea was to try and relate the heat transfer behavior of a fluidized bed to the ``particle pressure,`` the forces by only the particle phase of the two-phase mixture. (VC)

  14. Analysis of material collected on swipes using laser-induced breakdown spectroscopy

    International Nuclear Information System (INIS)

    Chinni, Rosemarie; Cremers, David A.; Multari, Rosalie

    2010-01-01

    Laser-induced breakdown spectroscopy (LIBS) was evaluated to determine elements collected on swipes as surface contamination. A series of long laser plasmas formed along the swipe surface (Post-it paper) interrogated the collected contamination. LIBS detection limits, determined for the elements Ag, As, Ba, Be, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Sr, and Zn on swipes (2 cm 2 area), ranged from 0.002 μg (Be) to 1.46 μg (Pb). The elements were introduced as constituents of synthetic silicate particles serving as a contaminant dust stimulant. The average predicted mass was within 16% of the actual mass on the swipe. The efficiency of collecting particles from surfaces including plastic, Formica, and Al metal was also evaluated. The ability to detect and differentiate two amino acids on a swipe from each other and from the swipe using chemometric modeling techniques was also demonstrated.

  15. Cataloguing outside the box a practical guide to cataloguing special collections materials

    CERN Document Server

    Falk, Patricia

    2010-01-01

    A practical guide to cataloguing and processing the unique special collections formats in the Browne Popular Culture Library (BPCL) and the Music Library and Sound Recordings Archives (MLSRA) at Bowling Green State University (BGSU) (e.g. fanzines, popular sound recordings, comic books, motion picture scripts and press kits, popular fiction). Cataloguing Outside the Box provides guidance to professionals in library and information science facing the same cataloguing challenges. Additionally, name authority work for these collections is addressed.provides practical guidelines and solutions for

  16. Hybrid engineered materials with high water-collecting efficiency inspired by Namib Desert beetles.

    Science.gov (United States)

    Zhu, Hai; Guo, Zhiguang

    2016-05-21

    Inspired by Namib Desert beetles, a hybrid superhydrophobic surface was fabricated, showing highly efficient fog harvesting with a water collection rate (WCR) of 1309.9 mg h(-1) cm(-2). And, the surface possessed an excellent robustness and self-cleaning property.

  17. An analysis of bones and other materials collected by Cape Vultures ...

    African Journals Online (AJOL)

    We compared bones and non-faunal items collected by Cape Vultures at the Blouberg and Kransberg colonies. Bones from the base of the nesting cliffs were on average longer than those from the crops and stomachs of birds. Bones from the Blouberg cliff base were on average shorter than those from the Kransberg.

  18. Swelling, stiffness, and stress in gel material - as related to moisture sorption

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    1996-01-01

    A method is presented by which estimates can be made on swelling, bulk modulus, and internal stresses in gel materials as related to water sorption. Porous gel materials are considered as gel materials made porous by capillary pores large enough not to create capillary condensation and capillary...

  19. [Patient-related complexity in nursing care - Collective case studies in the acute care hospital].

    Science.gov (United States)

    Gurtner, Caroline; Spirig, Rebecca; Staudacher, Diana; Huber, Evelyn

    2018-06-04

    Patient-related complexity in nursing care - Collective case studies in the acute care hospital Abstract. Patient-related complexity of nursing is defined by the three characteristics "instability", "uncertainty", and "variability". Complexity increased in the past years, due to reduced hospital length of stay and a growing number of patients with chronic and multiple diseases. We investigated the phenomenon of patient-related complexity from the point of view of nurses and clinical nurse specialists in an acute care hospital. In the context of a collective case study design, nurses and clinical nurse specialists assessed the complexity of nursing situations with a questionnaire. Subsequently, we interviewed nurses and clinical nurse specialists about their evaluation of patient-related complexity. In a within-case-analysis we summarized data inductively to create case narratives. By means of a cross-case-analysis we compared the cases with regard to deductively derived characteristics. The four cases exemplarily showed that the degree of complexity depends on the controllability and predictability of clinical problems. Additionally, complexity increases or decreases, according to patients' individual resources. Complex patient situations demand professional expertise, experience, communicative competencies and the ability for reflection. Beginner nurses would benefit from support and advice by experienced nurses to develop these skills.

  20. Randomised controlled trial of whether erotic material is required for semen collection: impact of informed consent on outcome.

    Science.gov (United States)

    Handelsman, D J; Sivananathan, T; Andres, L; Bathur, F; Jayadev, V; Conway, A J

    2013-11-01

    Semen is collected to evaluate male fertility or cryostore sperm preferentially in laboratories but such collection facilities have no standard fit-out. It is widely believed but untested whether providing erotic material (EM) is required to collect semen by masturbation in the unfamiliar environment. To test this assumption, 1520 men (1046 undergoing fertility evaluation, 474 sperm cryostorage, providing 1932 semen collection episodes) consecutively attending the semen laboratory of a major metropolitan teaching hospital for semen analysis were eligible for randomization to be provided or not with printed erotic material EM (X-rated, soft-core magazines) during semen collection. Randomization was performed by providing magazines in the collection rooms (as a variation on non-standard fit-out) on alternate weeks using a schedule concealed from participants. In the pilot study, men were randomized without seeking consent. In the second part of the study, which continued on from the first without interruption, an approved informed consent procedure was added. The primary outcome, the time to collect semen defined as the time from receiving to returning the sample receptacle, was significantly longer (by ~6%, 14.9 ± 0.3 [mean ± standard error of mean] vs. 14.0 ± 0.2 minutes, p = 0.02) among men provided with EM than those randomized to not being provided. There was no significant increase in the failure to collect semen samples (2.6% overall) nor any difference in age, semen volume or sperm concentration, output or motility according to whether EM was provided or not. The significantly longer time to collect was evident in the pilot study and the study overall, but not in the main study where the informed consent procedure was used. This study provides evidence that refutes the assumption that EM needs to be provided for semen collection in a laboratory. It also provides an example of a usually unobservable participation bias influencing study outcome of a

  1. Toponymic Lexicography and Methods of Fieldwork Material Collection (1900-1920s

    Directory of Open Access Journals (Sweden)

    Nadezhda M. Ivashova

    2012-06-01

    Full Text Available The author studies the early stage of the history of toponymic lexicography and field studies in Russia. More particularly the article focuses on the discussion provoked by I. P. Filevitch’s report “On elaboration of geographic nomenclature” at the Archeological Congress in Odessa (1896, as well as on some publications of 1920s containing results of toponymic research, revealing the importance of collecting toponyms, considering different aspects of toponymic studies, elaborating methods of fieldwork.

  2. 75 FR 62363 - Notice of Request for Extension of Approval of an Information Collection; Bees and Related Articles

    Science.gov (United States)

    2010-10-08

    ...] Notice of Request for Extension of Approval of an Information Collection; Bees and Related Articles... an information collection associated with regulations for the importation of bees and related... INFORMATION CONTACT: For information on regulations for the importation of bees and related articles, contact...

  3. High-level radioactive wastes disposals and collection of relating basic information on geological environment

    International Nuclear Information System (INIS)

    Ishii, Takemasa; Marui, Atsunao; Uchida, Youhei; Nakashima, Yoshito; Hayashi, Takeshi; Miyakoshi, Akinobu

    2004-01-01

    Details of the NMR (nuclear magnetic resonance) spectroscopic method with pulsed gradient magnetic field are described for obtaining self-diffusion coefficient of a water molecule in clay gels. By computer simulation of three dimensional diffusion in random lattice, it will be shown that a vast amount of data having hitherto collected on diffusion of water in geological environment may be understood systematically by employment of the concept of disturbance played by water adsorption on clay surface. The disturbance efficiency is expressed by a parameter obtainable in nuclear magnetic resonance (NMR) experiment. It is concluded that a thicker water-containing layer in buffer material surrounding the specimens would show a slower diffusion. (S. Ohno)

  4. Shoichi Sakata: His Life and Physics ---Collections of Materials in Sakata Memorial Archival Library---

    Science.gov (United States)

    Tanabashi, M.

    Shoichi Sakata and his Nagoya School made a lot of important achievements at the predawn of the particle physics revolution. The ``two-meson'' theory (introduction of the second generation leptons), the ``C-meson theory'' (a theory which inspired Tomonaga's renormalization theory), the ``Sakata model'' (a precursor to the quark model), and the ``Maki-Nakagawa-Sakata'' theory on the neutrino mixings are among them. These outputs are now regarded as essential ingredients in modern particle physics. Sakata also took his leadership in setting up democratic administration system in his theoretical particle physics group (E-ken). It was this democratic atmosphere in which many excellent physicists were brought up as Sakata's diciples. In this talk, I introduce Sakata and his achievements in physics, showing various materials archived in the Sakata Memorial Archival Library (SMAL), an archival repository of primary material showing Sakata's activities. These SMAL documents vividly show Sakata's way of thinking in his approach to the new physics.

  5. Sensing and collecting radioactive materials as a project to teach engineering design

    International Nuclear Information System (INIS)

    Drake, D.; Majdi, T.; Strack, J.

    2015-01-01

    The remote detection and isolation of radioactive materials is both a challenging engineering design project and a relevant issue given modern nuclear circumstances. This project is used in the undergraduate capstone class of the Engineering Physics Department at McMaster University to teach students engineering design. This paper discusses the course outline and learning outcomes of the students who took the course over the 2014-2015 academic year. (author)

  6. Critical Defense Materials: Government Collected Data Are Sufficiently Reliable to Assess Tantalum Availability

    Science.gov (United States)

    2016-03-01

    conflict in the Democratic Republic of the Congo or an adjoining country. Pub. L. No. 111- 203 §1502( e )(4). Columbite-tantalite (coltan), cassiterite, and...departments—the Securities and Exchange Commission, the Department of State, and the Department of Commerce —to take certain actions to implement the...USGS and Department of Commerce , and performing analyses to determine if shortfalls for materials will occur during potential conflict scenarios

  7. Sensing and collecting radioactive materials as a project to teach engineering design

    Energy Technology Data Exchange (ETDEWEB)

    Drake, D.; Majdi, T.; Strack, J., E-mail: draked2@mcmaster.ca [McMaster University, Hamiltion, ON (Canada); and others

    2015-07-01

    The remote detection and isolation of radioactive materials is both a challenging engineering design project and a relevant issue given modern nuclear circumstances. This project is used in the undergraduate capstone class of the Engineering Physics Department at McMaster University to teach students engineering design. This paper discusses the course outline and learning outcomes of the students who took the course over the 2014-2015 academic year. (author)

  8. Materials of the Annual Scientific Conference at the Institute for Nuclear Research. (Collected reports)

    International Nuclear Information System (INIS)

    Vishnevs'kij, Yi.M.; Ostashko, V.V.

    1995-01-01

    The proceeding contain contributed papers submitted to the annual Scientific conference of the Institute for Nuclear Research, Ukraine (kiev, January 1996). The proceedings include reports have been presented on the following sections: Nuclear physics, Solid State physics, Plasma physics, Radio ecology, Reactor safety, Radiation and reactor materials Study. The book is a direct reproduction of the print-ready manuscripts presented by the authors. No corrections have been made in the texts

  9. Motivational Hierarchy in the Chinese Brain: Primacy of the Individual Self, Relational Self, or Collective Self?

    Science.gov (United States)

    Zhu, Xiangru; Wu, Haiyan; Yang, Suyong; Gu, Ruolei

    2016-01-01

    According to the three-tier hierarchy of motivational potency in the self system, the self can be divided into individual self, relational self, and collective self, and individual self is at the top of the motivational hierarchy in Western culture. However, the motivational primacy of the individual self is challenged in Chinese culture, which raises the question about whether the three-tier hierarchy of motivational potency in the self system can be differentiated in the collectivist brain. The present study recorded the event-related potentials (ERPs) to evaluate brain responses when participants gambled for individual self, for a close friend (relational self), or for the class (collective self). The ERP results showed that when outcome feedback was positive, gambling for individual self evoked a larger reward positivity compared with gambling for a friend or for the class, while there is no difference between the latter two conditions. In contrast, when outcome feedback was negative, no significant effect was found between conditions. The present findings provide direct electrophysiological evidence that individual self is at the top of the three-tier hierarchy of the motivational system in the collectivist brain, which supports the classical pancultural view that individual self has motivational primacy.

  10. Evolution of investment costs related to wood energy collective installations (2000-2006). Final report - Synthesis

    International Nuclear Information System (INIS)

    2009-04-01

    Based on a survey on 90 French projects, and on a comparison with 76 German projects and 36 Austrian projects, this document proposes a synthesis of a study which aimed at identifying and analysing the evolution of investment costs for wood collective heating systems between 2000 and 2006. Data are analysed and commented while stressing their limitations which are related to their quality, to project heterogeneity, to economic value scattering. The evolution of investment costs of French projects is analysed in terms of global cost, and of items (heat production, public works, studies and construction, item ratios)

  11. PREFACE: The 16th International Symposium on Boron, Borides and Related Materials (ISBB 2008)

    Science.gov (United States)

    Tanaka, Takaho

    2009-07-01

    This volume of Journal of Physics: Conference Series contains invited and contributed peer-reviewed papers that were presented at the 16th International Symposium on Boron, Borides and Related Materials (ISBB 2008), which was held on 7-12 September 2008, at Kunibiki Messe, Matsue, Japan. This triennial symposium has a half-century long history starting from the 1st meeting in 1959 at Asbury Park, New Jersey. We were very pleased to organize ISBB 2008, which gathered chemists, physicists, materials scientists as well as diamond and high-pressure researchers. This meeting had a strong background in the boron-related Japanese research history, which includes the discovery of superconductivity in MgB2 and development of Nd-Fe-B hard magnets and of YB66 soft X-ray monochromator. The scope of ISBB 2008 spans both basic and applied interdisciplinary research that is centered on boron, borides and related materials, and the collection of articles defines the state of the art in research on these materials. The topics are centered on: 1. Preparation of new materials (single crystals, thin films, nanostructures, ceramics, etc) under normal or extreme conditions. 2. Crystal structure and chemical bonding (new crystal structures, nonstoichiometry, defects, clusters, quantum-chemical calculations). 3. Physical and chemical properties (band structure, phonon spectra, superconductivity; optical, electrical, magnetic, emissive, mechanical properties; phase diagrams, thermodynamics, catalytic activity, etc) in a wide range of temperatures and pressures. 4. Applications and prospects (thermoelectric converters, composites, ceramics, coatings, etc) There were a few discoveries of new materials, such as nanomaterials, and developments in applications. Many contributions were related to 4f heavy Fermion systems of rare-earth borides. Exotic mechanisms of magnetism and Kondo effects have been discussed, which may indicate another direction of development of boride. Two special sessions

  12. Chemical pollutants in field-collected canvasback tissues, eggs, and food materials

    Science.gov (United States)

    White, D.H.; Dieter, M.P.; Stendell, R.C.

    1976-01-01

    In 1972 studies began on the levels of environmental pollutants in canvasback tissues, eggs, and food items. The purpose of the studies were to determine if the levels of toxic chemicals found in canvasbacks were of the magnitude to cause problems affecting reproduction and survival. Overall, levels of organochlorine pesticides and PCB's were low in canvasbacks and their eggs. Some individual birds, however, laid eggs with elevated residues of DDE (12.1 ppm) or PCB's (28.6 ppm). There was no significant difference between eggshell thicknesses of 1972-73 and pre-1946 collections. About 12% of the canvasbacks analyzed had elevated levels of blood lead with reduced ALAD enzyme activity. Adult canvasbacks collected from the Chesapeake Bay in 1975 had moderate to high levels of cadmium in their kidneys. Cadmium, in excessive amounts is very toxic and can curtail spermatogenesis in male birds. Although no single toxic chemical found in wild canvasbacks appears to be a major factor in population declines, the cumulative effects of sublethal levels of all the pollutants may render birds susceptible to disease, hunting pressure or predation.

  13. Identity and equipment in biosocial collectives: a material-semiotic reading

    Directory of Open Access Journals (Sweden)

    Jorge Castillo-Sepúlveda

    2015-07-01

    Full Text Available Biosociality refers to modes of personal and collective identification that are defined from a biological trait. Diverse investigations that have addressed social formations of this type, have exalted how through interaction processes with socio-technical entities, the identity of involved actors is redefined. In this paper are analysed the implications of participation in biosocial collectives to the humans involved, from the actor-network theory. In that sense, it is described how in these spaces the identity behaves as a composition, involving the association of heterogeneous elements which articulate a human to a number of entities that can transform the definition of the self. Also, are acquired meanings that amplify the spectrum of possible actions to face the uncertainty of the disease itself. By using the term of equipment, described by Foucault and rescued by Rabinow, it is considered that participation in biosocial weaves affects the acquisition of new skills to deal with scenarios of uncertainty. An equipment consists in a continuum of actions aimed to a practical purpose involving the preparation to deal with different contexts, from the association to heterogeneous entities.

  14. Shoichi Sakata: His life and physics. Collections of materials in Sakata Memorial Archival Library

    International Nuclear Information System (INIS)

    Tanabashi, Masaharu

    2012-01-01

    Shoichi Sakata and his Nagoya School made a lot of important achievements at the predawn of the particle physics revolution. The “two-meson” theory (introduction of the second generation leptons), the “C-meson theory” (a theory which inspired Tomonaga's renormalization theory), the “Sakata model” (a precursor to the quark model), and the “Maki-Nakagawa-Sakata” theory on the neutrino mixings are among them. These outputs are now regarded as essential ingredients in modern particle physics. Sakata also took his leadership in setting up democratic administration system in his theoretical particle physics group (E-ken). It was this democratic atmosphere in which many excellent physicists were brought up as Sakata's diciples. In this talk, I introduce Sakata and his achievements in physics, showing various materials archived in the Sakata Memorial Archival Library (SMAL), an archival repository of primary material showing Sakata's activities. These SMAL documents vividly show Sakata's way of thinking in his approach to the new physics. (author)

  15. Hidden biodiversity in entomological collections: The overlooked co-occurrence of dipteran and hymenopteran ant parasitoids in stored biological material.

    Directory of Open Access Journals (Sweden)

    Gabriela Pérez-Lachaud

    Full Text Available Biological collections around the world are the repository of biodiversity on Earth; they also hold a large quantity of unsorted, unidentified, or misidentified material and can house behavioral information on species that are difficult to access or no longer available to science. Among the unsorted, alcohol-preserved material stored in the Formicidae Collection of the 'El Colegio de la Frontera Sur' Research Center (Chetumal, Mexico, we found nine colonies of the ponerine ant Neoponera villosa, that had been collected in bromeliads at Calakmul (Campeche, Mexico in 1999. Ants and their brood were revised for the presence of any sign of parasitism. Cocoons were dissected and their content examined under a stereomicroscope. Six N. villosa prepupae had been attacked by the ectoparasitoid syrphid fly Hypselosyrphus trigonus Hull (Syrphidae: Microdontinae, to date the only known dipteran species of the Microdontinae with a parasitoid lifestyle. In addition, six male pupae from three colonies contained gregarious endoparasitoid wasps. These were specialized in parasitizing this specific host caste as no gyne or worker pupae displayed signs of having been attacked. Only immature stages (larvae and pupae of the wasp could be obtained. Due to the long storage period, DNA amplification failed; however, based on biological and morphological data, pupae were placed in the Encyrtidae family. This is the first record of an encyrtid wasp parasitizing N. villosa, and the second example of an encyrtid as a primary parasitoid of ants. Furthermore, it is also the first record of co-occurrence of a dipteran ectoparasitoid and a hymenopteran endoparasitoid living in sympatry within the same population of host ants. Our findings highlight the importance of biological collections as reservoirs of hidden biodiversity, not only at the taxonomic level, but also at the behavioral level, revealing complex living networks. They also highlight the need for funding in order

  16. Hidden biodiversity in entomological collections: The overlooked co-occurrence of dipteran and hymenopteran ant parasitoids in stored biological material.

    Science.gov (United States)

    Pérez-Lachaud, Gabriela; Lachaud, Jean-Paul

    2017-01-01

    Biological collections around the world are the repository of biodiversity on Earth; they also hold a large quantity of unsorted, unidentified, or misidentified material and can house behavioral information on species that are difficult to access or no longer available to science. Among the unsorted, alcohol-preserved material stored in the Formicidae Collection of the 'El Colegio de la Frontera Sur' Research Center (Chetumal, Mexico), we found nine colonies of the ponerine ant Neoponera villosa, that had been collected in bromeliads at Calakmul (Campeche, Mexico) in 1999. Ants and their brood were revised for the presence of any sign of parasitism. Cocoons were dissected and their content examined under a stereomicroscope. Six N. villosa prepupae had been attacked by the ectoparasitoid syrphid fly Hypselosyrphus trigonus Hull (Syrphidae: Microdontinae), to date the only known dipteran species of the Microdontinae with a parasitoid lifestyle. In addition, six male pupae from three colonies contained gregarious endoparasitoid wasps. These were specialized in parasitizing this specific host caste as no gyne or worker pupae displayed signs of having been attacked. Only immature stages (larvae and pupae) of the wasp could be obtained. Due to the long storage period, DNA amplification failed; however, based on biological and morphological data, pupae were placed in the Encyrtidae family. This is the first record of an encyrtid wasp parasitizing N. villosa, and the second example of an encyrtid as a primary parasitoid of ants. Furthermore, it is also the first record of co-occurrence of a dipteran ectoparasitoid and a hymenopteran endoparasitoid living in sympatry within the same population of host ants. Our findings highlight the importance of biological collections as reservoirs of hidden biodiversity, not only at the taxonomic level, but also at the behavioral level, revealing complex living networks. They also highlight the need for funding in order to carry out

  17. A double-mutant collection targeting MAP kinase related genes in Arabidopsis for studying genetic interactions.

    Science.gov (United States)

    Su, Shih-Heng; Krysan, Patrick J

    2016-12-01

    Mitogen-activated protein kinase cascades are conserved in all eukaryotes. In Arabidopsis thaliana there are approximately 80 genes encoding MAP kinase kinase kinases (MAP3K), 10 genes encoding MAP kinase kinases (MAP2K), and 20 genes encoding MAP kinases (MAPK). Reverse genetic analysis has failed to reveal abnormal phenotypes for a majority of these genes. One strategy for uncovering gene function when single-mutant lines do not produce an informative phenotype is to perform a systematic genetic interaction screen whereby double-mutants are created from a large library of single-mutant lines. Here we describe a new collection of 275 double-mutant lines derived from a library of single-mutants targeting genes related to MAP kinase signaling. To facilitate this study, we developed a high-throughput double-mutant generating pipeline using a system for growing Arabidopsis seedlings in 96-well plates. A quantitative root growth assay was used to screen for evidence of genetic interactions in this double-mutant collection. Our screen revealed four genetic interactions, all of which caused synthetic enhancement of the root growth defects observed in a MAP kinase 4 (MPK4) single-mutant line. Seeds for this double-mutant collection are publicly available through the Arabidopsis Biological Resource Center. Scientists interested in diverse biological processes can now screen this double-mutant collection under a wide range of growth conditions in order to search for additional genetic interactions that may provide new insights into MAP kinase signaling. © 2016 The Authors The Plant Journal © 2016 John Wiley & Sons Ltd.

  18. Relative Density of Backfilled Soil Material around Monopiles for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Sørensen, Søren Peder Hyldal; Ibsen, Lars Bo; Frigaard, Peter

    2012-01-01

    The relative density of backfilled soil material around offshore monopiles is assessed through experimental testing in the Large Wave Channel (GWK) of the Coastal Research Centre (FZK) in Hannover. The relative density of the backfill material was found to vary between 65 and 80 %. The dependency...... of the relative density of backfill on the maximum pile bending moment is assessed through three-dimensional numerical modeling of a monopile foundation located at the offshore wind farm at Horns Reef, Denmark....

  19. The Relationship Between Collective Self-Esteem, Acculturation, and Alcohol-Related Consequences Among Asian American Young Adults

    OpenAIRE

    PEDERSEN, ERIC R.; HSU, SHARON HSIN; NEIGHBORS, CLAYTON; LEE, CHRISTINE M.; LARIMER, MARY E.

    2013-01-01

    We examined the relationship between collective self-esteem (i.e., the value one places on being part of a collective group), acculturation, and alcohol-related consequences in a sample of 442 Asian American young adults. We found that membership self-esteem and public collective self-esteem interacted with acculturation such that low levels of both predicted greater rates of consequences. Participants with lower acculturation and greater private collective self-esteem experienced more alcoho...

  20. Impact of collection container material and holding times on sample integrity for mercury and methylmercury in water

    Energy Technology Data Exchange (ETDEWEB)

    Riscassi, Ami L [ORNL; Miller, Carrie L [ORNL; Brooks, Scott C [ORNL

    2014-01-01

    Mercury (Hg) and methylmercury (MeHg) concentrations in streamwater can vary on short timescales (hourly or less) during storm flow and on a diel cycle; the frequency and timing of sampling required to accurately characterize these dynamics may be difficult to accomplish manually. Automated sampling can assist in sample collection; however use has been limited for Hg and MeHg analysis due to stability concerns of trace concentrations during extended storage times. We examined the viability of using automated samplers with disposable low-density polyethylene (LDPE) sample bags to collect industrially contaminated streamwater for unfiltered and filtered Hg and MeHg analysis. Specifically we investigated the effect of holding times ranging from hours to days on streamwater collected during baseflow and storm flow. Unfiltered and filtered Hg and MeHg concentrations decreased with increases in time prior to sample processing; holding times of 24 hours or less resulted in concentration changes (mean 11 7% different) similar to variability in duplicates collected manually during analogous field conditions (mean 7 10% different). Comparisons of samples collected with manual and automated techniques throughout a year for a wide range of stream conditions were also found to be similar to differences observed between duplicate grab samples. These results demonstrate automated sampling into LDPE bags with holding times of 24 hours or less can be effectively used to collect streamwater for Hg and MeHg analysis, and encourage the testing of these materials and methods for implementation in other aqueous systems where high-frequency sampling is warranted.

  1. JRC GMO-Amplicons: a collection of nucleic acid sequences related to genetically modified organisms.

    Science.gov (United States)

    Petrillo, Mauro; Angers-Loustau, Alexandre; Henriksson, Peter; Bonfini, Laura; Patak, Alex; Kreysa, Joachim

    2015-01-01

    The DNA target sequence is the key element in designing detection methods for genetically modified organisms (GMOs). Unfortunately this information is frequently lacking, especially for unauthorized GMOs. In addition, patent sequences are generally poorly annotated, buried in complex and extensive documentation and hard to link to the corresponding GM event. Here, we present the JRC GMO-Amplicons, a database of amplicons collected by screening public nucleotide sequence databanks by in silico determination of PCR amplification with reference methods for GMO analysis. The European Union Reference Laboratory for Genetically Modified Food and Feed (EU-RL GMFF) provides these methods in the GMOMETHODS database to support enforcement of EU legislation and GM food/feed control. The JRC GMO-Amplicons database is composed of more than 240 000 amplicons, which can be easily accessed and screened through a web interface. To our knowledge, this is the first attempt at pooling and collecting publicly available sequences related to GMOs in food and feed. The JRC GMO-Amplicons supports control laboratories in the design and assessment of GMO methods, providing inter-alia in silico prediction of primers specificity and GM targets coverage. The new tool can assist the laboratories in the analysis of complex issues, such as the detection and identification of unauthorized GMOs. Notably, the JRC GMO-Amplicons database allows the retrieval and characterization of GMO-related sequences included in patents documentation. Finally, it can help annotating poorly described GM sequences and identifying new relevant GMO-related sequences in public databases. The JRC GMO-Amplicons is freely accessible through a web-based portal that is hosted on the EU-RL GMFF website. Database URL: http://gmo-crl.jrc.ec.europa.eu/jrcgmoamplicons/. © The Author(s) 2015. Published by Oxford University Press.

  2. Simulation of the electron collection efficiency of a PMT based on the MCP coated with high secondary yield material

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Lin, E-mail: chenlin@opt.cn [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Graduate School of Chinese Academy of Sciences (CAS), Beijing 100049 (China); Xi' an Jiaotong University, Xi' an 710049 (China); Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan 030006 (China); Tian, Jinshou [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan 030006 (China); Zhao, Tianchi [Institute of High Energy Physics (IHEP) of CAS, Beijing 100049 (China); Liu, Chunliang [Xi' an Jiaotong University, Xi' an 710049 (China); Liu, Hulin; Wei, Yonglin; Sai, Xiaofeng [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Chen, Ping [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Graduate School of Chinese Academy of Sciences (CAS), Beijing 100049 (China); Wang, Xing; Lu, Yu [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Hui, Dandan [State Key Laboratory of Transient Optics and Photonics, Xi' an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi' an 710119 (China); Graduate School of Chinese Academy of Sciences (CAS), Beijing 100049 (China)

    2016-11-01

    Owning to the serious loss of photoelectrons striking at the input electrode of traditional microchannel plate (MCP), photoelectron collection efficiency (CE) of photomultiplier tubes based on MCP (MCP-PMTs) fluctuates around the MCP open area fraction and cannot make a breakthrough. Depositing a thin film of high secondary electron yield material on the MCP is proposed as an effective approach to improve the CE. The available simulation and experimental data to validate it, however, is sparse. In our work, a three-dimensional small area MCP model is developed in CST Studio Suite to evaluate the collection efficiencies of PMTs based on the traditional MCP and the coated one, respectively. Results predict that CE of the PMT based on the coated MCP has a significant increase and a better uniformity, which is expected to reach 100%.

  3. Materials compatibility issues related to thermal energy storage for a space solar dynamic power system

    Science.gov (United States)

    Faget, N. M.

    1986-01-01

    Attention is given to results obtained to date in developmental investigations of a thermal energy storage (TES) system for the projected NASA Space Station's solar dynamic power system; these tests have concentrated on issues related to materials compatibility for phase change materials (PCMs) and their containment vessels' materials. The five PCMs tested have melting temperatures that correspond to the operating temperatures of either the Brayton or Rankine heat engines, which were independently chosen for their high energy densities.

  4. Homicides with corpse dismemberment in the material collected by the Department of Forensic Medicine, Krakow, Poland.

    Science.gov (United States)

    Konopka, Tomasz; Bolechała, Filip; Strona, Marcin; Kopacz, Paweł

    2016-01-01

    Aim of the study: To determine the circumstances which can be useful for offenders profiling in homicide cases with victim's body dismemberment. Material and methods: Study of all homicide cases with victim's corpse dismemberment examined in Krakow Department of Forensic Medicine over the last 50 years. Results: Within the past 50 years, a total number of 30 cases of homicides with dismembered bodies were examined in Krakow. 22 cases represent defensive mutilations performed by offender, 3 cases can be classified as offensive muti-lations and 3 cases represent aggressive mutilations - decapitation as a method of committing homicide. In this period the only 1 case of necrophilic mutilations was examined, when the body was dismembered without murder. In most cases the background of homicide was the family conflict, 6 was cause of mental illness of perpetrator and in 3 was sexual motive. Only in 3 cases (from 25 when the offender was known) perpetrator kill a stranger. In the other the offender belonged to the family or friends of the victim. In all cases where the perpetrator was determined, homicide and dismemberment was performed in his place of residence. The findings of the Police investigations indicate that in most cases homicides were not planned, occurred under the influence of emotion, only two have been previously scheduled. Conclusions: Homicides with corpses dismemberment usually are committed by offenders who is in close relationship with victim (family or friend). Dismemberment is almost always performed in the same place as murder - home of perpetrator. This type of homicide usually is not planned.

  5. Homicides with corpse dismemberment in the material collected by the Department of Forensic Medicine, Krakow, Poland

    Directory of Open Access Journals (Sweden)

    Tomasz Konopka

    2017-06-01

    Full Text Available Aim of the study : To determine the circumstances which can be useful for offenders profiling in homicide cases with victim’s body dismemberment. Material and methods: Study of all homicide cases with victim’s corpse dismemberment examined in Krakow Department of Forensic Medicine over the last 50 years. Results : Within the past 50 years, a total number of 30 cases of homicides with dismembered bodies were examined in Krakow. 22 cases represent defensive mutilations performed by offender, 3 cases can be classified as offensive muti­lations and 3 cases represent aggressive mutilations – decapitation as a method of committing homicide. In this period the only 1 case of necrophilic mutilations was examined, when the body was dismembered without murder. In most cases the background of homicide was the family conflict, 6 was cause of mental illness of perpetrator and in 3 was sexual motive. Only in 3 cases (from 25 when the offender was known perpetrator kill a stranger. In the other the offender belonged to the family or friends of the victim. In all cases where the perpetrator was determined, homicide and dismemberment was performed in his place of residence. The findings of the Police investigations indicate that in most cases homicides were not planned, occurred under the influence of emotion, only two have been previously scheduled. Conclusions : Homicides with corpses dismemberment usually are committed by offenders who is in close relationship with victim (family or friend. Dismemberment is almost always performed in the same place as murder – home of perpetrator. This type of homicide usually is not planned.

  6. Material parameters in a thick hydrogenated amorphous silicon detector and their effect on signal collection

    International Nuclear Information System (INIS)

    Qureshi, S.; Perez-Mendez, V.; Kaplan, S.N.; Fujieda, I.; Cho, G.; Street, R.A.

    1989-04-01

    Transient photoconductivity and ESR measurements were done to relate the ionized dangling bond density of thick hydrogenated amorphous silicon (a-Si:H) detectors. We found that only a fraction (/approximately/30--35%) of the total defect density as measured by ESR is ionized when the detector is biased into deep depletion. The measurements on annealed samples also show that this fraction is about 0.3. An explanation based on the shift of the Fermi energy is given. The measurements show that the time dependence of relaxation is a stretched exponential. 8 refs., 4 figs., 1 tab

  7. Uncertainty relations and topological-band insulator transitions in 2D gapped Dirac materials

    International Nuclear Information System (INIS)

    Romera, E; Calixto, M

    2015-01-01

    Uncertainty relations are studied for a characterization of topological-band insulator transitions in 2D gapped Dirac materials isostructural with graphene. We show that the relative or Kullback–Leibler entropy in position and momentum spaces, and the standard variance-based uncertainty relation give sharp signatures of topological phase transitions in these systems. (paper)

  8. Can ex situ plant collections differ in effectiveness, even 1 between closely related species?

    Science.gov (United States)

    Conservation of imperiled plant species often requires ex situ (offsite) living collections. Protocols for developing these collections most often emphasize sampling depth, but little is known about the genetics of such collections. This study compares how well a single collecting protocol can captu...

  9. Evaluating the Environmental Dimension of Material Efficiency Strategies Relating to the Circular Economy

    Directory of Open Access Journals (Sweden)

    Stuart Walker

    2018-03-01

    Full Text Available Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life-cycle. Although materials such as steel, on account of high recycling rates at end-of-life, are amongst the most ‘circular’ of manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. Life Cycle Assessment (LCA is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and reuse of materials from the supply chain and at end-of-life is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. The results are compared with a number of proposed material circularity indicators. Two conclusions from this exercise are that (i LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and (ii when applying indicators relating to the circularity of materials these should also be supported by LCA-based studies.

  10. Young Children's Judgments About the Relative Size of Shared Portions: The Role of Material Type

    Science.gov (United States)

    Wing, Rachel E.; Beal, Carole R.

    2004-01-01

    3 experiments were conducted to assess young (5-7 years) children's ability to judge the relative amount that a character would receive if sharing a material with 1 friend (halves) or 2 friends (thirds). Materials included items that appeared in 3 forms: continuous, discrete, and composite. In the first 2 experiments, performance was best with…

  11. Acute inflammatory reaction in rats after intratracheal instillation of material collected from a nylon flocking plant.

    Science.gov (United States)

    Porter, D W; Castranova, V; Robinson, V A; Hubbs, A F; Mercer, R R; Scabilloni, J; Goldsmith, T; Schwegler-Berry, D; Battelli, L; Washko, R; Burkhart, J; Piacitelli, C; Whitmer, M; Jones, W

    1999-05-14

    Several cases of interstitial lung disease have been diagnosed among workers at a nylon flock plant, but the etiologic agent for the disease outbreak was unknown. The results of a medical survey and industrial hygiene study indicated that the dust present in the plant may be responsible. Thus, airborne dust collected at the plant was examined for its inflammatory potential in rat lungs. The endpoints measured were: (1) breathing rates, (2) differential cell counts of bronchoalveolar lavage cells, (3) alveolar macrophage (AM) chemiluminescence, (4) albumin concentration and matrix metalloprotease activities in the acellular fluid from the initial bronchoalveolar lavage, and (5) pulmonary histopathology. In the first study, rats received a single dose of the airborne dust sample (10 mg/kg body weight) by intratracheal (IT) instillation. At 1 d post-IT, all inflammatory endpoints were significantly increased versus controls, but by 29 d post-IT they did not differ significantly from controls. Histopathology demonstrated mild to moderate, multifocal, suppurative pneumonia, usually centered around bronchioles, at 1 d post-IT. At 29 d post-IT, pulmonary inflammation was minimal to mild and characterized by alveolar histocytosis usually restricted to the immediate area of retained bire-fringent fibers. In subsequent experiments, airborne dust was extracted with water and the dust (washed airborne dust) and water extract (soluble fraction) were separated by centrifugation for further study. Nylon tow dust was prepared in the laboratory by milling uncut nylon strands (called tow) that had not been treated with the finish or dyes that are commonly used in the flock plants. Rats were administered a single dose of a dust sample (10 mg/kg body weight) or the soluble fraction (1.3 ml/kg body weight) by IT administration and the same endpoints were measured at 1 d post-IT. The dust samples caused significant increases in all of the inflammatory endpoints; however, the soluble

  12. DamaGIS: a multisource geodatabase for collection of flood-related damage data

    Science.gov (United States)

    Saint-Martin, Clotilde; Javelle, Pierre; Vinet, Freddy

    2018-06-01

    Every year in France, recurring flood events result in several million euros of damage, and reducing the heavy consequences of floods has become a high priority. However, actions to reduce the impact of floods are often hindered by the lack of damage data on past flood events. The present paper introduces a new database for collection and assessment of flood-related damage. The DamaGIS database offers an innovative bottom-up approach to gather and identify damage data from multiple sources, including new media. The study area has been defined as the south of France considering the high frequency of floods over the past years. This paper presents the structure and contents of the database. It also presents operating instructions in order to keep collecting damage data within the database. This paper also describes an easily reproducible method to assess the severity of flood damage regardless of the location or date of occurrence. A first analysis of the damage contents is also provided in order to assess data quality and the relevance of the database. According to this analysis, despite its lack of comprehensiveness, the DamaGIS database presents many advantages. Indeed, DamaGIS provides a high accuracy of data as well as simplicity of use. It also has the additional benefit of being accessible in multiple formats and is open access. The DamaGIS database is available at https://doi.org/10.5281/zenodo.1241089" target="_blank">https://doi.org/10.5281/zenodo.1241089.

  13. Species-specific accumulation of dioxin related compounds in cetaceans collected from Japanese coastal waters

    Energy Technology Data Exchange (ETDEWEB)

    Kajiwara, N.; Watanabe, M.; Tanabe, S. [Center for Marine Environmental Studies (CMES), Ehime Univ. (Japan); Amano, M. [Ocean Research Inst., Univ. of Tokyo, Iwate (Japan); Yamada, T. [National Science Museum, Tokyo (Japan)

    2004-09-15

    Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are extremely hazardous and persistent chemicals identified as contaminants in chlorophenols, herbicides, fly ash and other incineration products. Dioxin-like PCBs including non- and mono-ortho coplanar PCBs are referred to as dioxin related compounds and are evaluated on par with PCDD/Fs in environmental risks since they have a high toxicity, similar to that of PCDD/Fs. These congeners have a range of physicochemical characteristics, which profoundly affect their persistence, environmental distribution, and bioaccumulation in aquatic food chains. Fish-eating wildlife such as marine mammals are particularly vulnerable to such contamination given their long lives, high trophic level, relative inability to metabolize many persistent organic pollutants (POPs), and the biomagnification of these contaminants in aquatic food chains. However, most studies dealing with PCDDs and PCDFs in marine mammals have been carried out on pinnipeds, and data on PCDD/Fs levels in cetaceans are scarce. The present study is aimed at understanding the recent pattern of contamination by dioxin related compounds including non- and mono-ortho coplanar PCBs and PCDD/Fs in three cetacean species collected from Japanese coastal waters during 1998-2001, and also to discuss the factors determining the accumulation.

  14. Special quasirandom structures for gadolinia-doped ceria and related materials

    KAUST Repository

    Wang, Hao; Chroneos, Alexander I.; Jiang, Chao; Schwingenschlö gl, Udo

    2012-01-01

    cells describing 9% and 12% gadolinia doped ceria. These SQS cells are transferable and can be used to model related materials such as yttria stabilized zirconia. To demonstrate the applicability of the method we use density functional theory

  15. The relationship between collective self-esteem, acculturation, and alcohol-related consequences among Asian American young adults.

    Science.gov (United States)

    Pedersen, Eric R; Hsu, Sharon Hsin; Neighbors, Clayton; Lee, Christine M; Larimer, Mary E

    2013-01-01

    We examined the relationship between collective self-esteem (i.e., the value one places on being part of a collective group), acculturation, and alcohol-related consequences in a sample of 442 Asian American young adults. We found that membership self-esteem and public collective self-esteem interacted with acculturation such that low levels of both predicted greater rates of consequences. Participants with lower acculturation and greater private collective self-esteem experienced more alcohol consequences. This study suggests that differential aspects of collective self-esteem may serve as protective or risk factors for Asian American young adults depending on degree of acculturation.

  16. Lower life satisfaction related to materialism in children frequently exposed to advertising.

    Science.gov (United States)

    Opree, Suzanna J; Buijzen, Moniek; Valkenburg, Patti M

    2012-09-01

    Research among adults suggests that materialism and life satisfaction negatively influence each other, causing a downward spiral. So far, cross-sectional research among children has indicated that materialistic children are less happy, but causality remains uncertain. This study adds to the literature by investigating the longitudinal relation between materialism and life satisfaction. We also investigated whether their relation depended on children's level of exposure to advertising. A sample of 466 children (aged 8-11; 55% girls) participated in a 2-wave online survey with a 1-year interval. We asked children questions about material possessions, life satisfaction, and advertising. We used structural equation modeling to study the relationship between these variables. For the children in our sample, no effect of materialism on life satisfaction was observed. However, life satisfaction did have a negative effect on materialism. Exposure to advertising facilitated this effect: We only found an effect of life satisfaction on materialism for children who were frequently exposed to advertising. Among 8- to 11-year-old children, life satisfaction leads to decreased materialism and not the other way around. However, this effect only holds for children who are frequently exposed to television advertising. It is plausible that the material values portrayed in advertising teach children that material possessions are a way to cope with decreased life satisfaction. It is important to reduce this effect, because findings among adults suggest that materialistic children may become less happy later in life. Various intervention strategies are discussed.

  17. Representations for implicit constitutive relations describing non-dissipative response of isotropic materials

    Science.gov (United States)

    Gokulnath, C.; Saravanan, U.; Rajagopal, K. R.

    2017-12-01

    A methodology for obtaining implicit constitutive representations involving the Cauchy stress and the Hencky strain for isotropic materials undergoing a non-dissipative process is developed. Using this methodology, a general constitutive representation for a subclass of implicit models relating the Cauchy stress and the Hencky strain is obtained for an isotropic material with no internal constraints. It is shown that even for this subclass, unlike classical Green elasticity, one has to specify three potentials to relate the Cauchy stress and the Hencky strain. Then, a procedure to obtain implicit constitutive representations for isotropic materials with internal constraints is presented. As an illustration, it is shown that for incompressible materials the Cauchy stress and the Hencky strain could be related through a single potential. Finally, constitutive approximations are obtained when the displacement gradient is small.

  18. How the relative permittivity of solar cell materials influences solar cell performance

    DEFF Research Database (Denmark)

    Crovetto, Andrea; Huss-Hansen, Mathias K.; Hansen, Ole

    2017-01-01

    of the materials permittivity on the physics and performance of the solar cell by means of numerical simulation supported by analytical relations. We demonstrate that, depending on the specific solar cell configuration and materials properties, there are scenarios where the relative permittivity has a major......The relative permittivity of the materials constituting heterojunction solar cells is usually not considered as a design parameter when searching for novel combinations of heterojunction materials. In this work, we investigate the validity of such an approach. Specifically, we show the effect...... the heterojunction partner has a high permittivity, solar cells are consistently more robust against several non-idealities that are especially likely to occur in early-stage development, when the device is not yet optimized....

  19. Readability of Spine-Related Patient Education Materials From Leading Orthopedic Academic Centers.

    Science.gov (United States)

    Ryu, Justine H; Yi, Paul H

    2016-05-01

    Cross-sectional analysis of online spine-related patient education materials from leading academic centers. To assess the readability levels of spine surgery-related patient education materials available on the websites of academic orthopedic surgery departments. The Internet is becoming an increasingly popular resource for patient education. Yet many previous studies have found that Internet-based orthopedic-related patient education materials from subspecialty societies are written at a level too difficult for the average American; however, no prior study has assessed the readability of spine surgery-related patient educational materials from leading academic centers. All spine surgery-related articles from the online patient education libraries of the top five US News & World Report-ranked orthopedic institutions were assessed for readability using the Flesch-Kincaid (FK) readability test. Mean readability levels of articles amongst the five academic institutions and articles were compared. We also determined the number of articles with readability levels at or below the recommended sixth- or eight-grade levels. Intraobserver and interobserver reliability of readability assessment were assessed. A total of 122 articles were reviewed. The mean overall FK grade level was 11.4; the difference in mean FK grade level between each department varied significantly (range, 9.3-13.4; P Online patient education materials related to spine from academic orthopedic centers are written at a level too high for the average patient, consistent with spine surgery-related patient education materials provided by the American Academy of Orthopaedic Surgeons and spine subspecialty societies. This study highlights the potential difficulties patients might have in reading and comprehending the information in publicly available education materials related to spine. N/A.

  20. Research study on highly functional carbon related materials; Tansokei kokino zairyo no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The study results on highly functional carbon related materials are reported as a part of the leading research in fiscal 1996. Synthesis of these novel materials is outlined, and R & D results on the following materials are described: diamond, hetero-diamond, graphite, amorphous carbon, carbyne, fullerences, carbon nitride and chemically modified carbon materials. Their issues, future possibility and market in 2010 are also described. The markets are predicted of such electronic materials as electronic emitter, sensor, solid device and heat sink, such optical materials as X-ray lithography, and such chemical materials as electrode and catalyst. Promising characteristics of light-weight and high-hardness machine materials are presented, and some issues such as material synthesis, and intensive machining and application technologies are described. The future markets are predicted of their applications to tools, dies, information equipment, glass, automobiles, aircraft, spacecraft and industrial machines. Problems and their break through techniques of these novel materials are also presented. 220 refs., 68 figs., 16 tabs.

  1. 75 FR 61249 - Proposed Information Collection (Annual Certification of Veteran Status and Veteran-Relatives...

    Science.gov (United States)

    2010-10-04

    ..., non-VBA employees in VBA space and Veteran Service Organization employees who have access to VA's... (VBA) is announcing an opportunity for public comment on the proposed collection of certain information... the following collection of information, VBA invites comments on: (1) Whether the proposed collection...

  2. 75 FR 61858 - Proposed Information Collection (Annual Certification of Veteran Status and Veteran-Relatives...

    Science.gov (United States)

    2010-10-06

    ..., non-VBA employees in VBA space and Veteran Service Organization employees who have access to VA's... (VBA) is announcing an opportunity for public comment on the proposed collection of certain information... the following collection of information, VBA invites comments on: (1) Whether the proposed collection...

  3. Readability evaluation of Internet-based patient education materials related to the anesthesiology field.

    Science.gov (United States)

    De Oliveira, Gildasio S; Jung, Michael; Mccaffery, Kirsten J; McCarthy, Robert J; Wolf, Michael S

    2015-08-01

    The main objective of the current investigation was to assess the readability of Internet-based patient education materials related to the field of anesthesiology. We hypothesized that the majority of patient education materials would not be written according to current recommended readability grade level. Online patient education materials describing procedures, risks, and management of anesthesia-related topics were identified using the search engine Google (available at www.google.com) using the terms anesthesia, anesthesiology, anesthesia risks, and anesthesia care. Cross-sectional evaluation. None. Assessments of content readability were performed using validated instruments (Flesch-Kincaid Grade Formulae, the Gunning Frequency of Gobbledygook, the New Dale-Chall Test, the Fry graph, and the Flesch Reading Ease score). Ninety-six Web sites containing Internet patient education materials (IPEMs) were evaluated. The median (interquartile range) readability grade level for all evaluated IPEMs was 13.5 (12.0-14.6). All the evaluated documents were classified at a greater readability level than the current recommended readability grade, P Internet-based patient education materials related to the field of anesthesiology are currently written far above the recommended readability grade level. High complexity of written education materials likely limits access of information to millions of American patients. Redesign of online content of Web sites that provide patient education material regarding anesthesia could be an important step in improving access to information for patients with poor health literacy. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Radiological dose assessment related to management of naturally occurring radioactive materials generated by the petroleum industry

    International Nuclear Information System (INIS)

    Smith, K.P.; Blunt, D.L.; Williams, G.P.; Tebes, C.L.

    1995-01-01

    A preliminary radiological dose assessment related to equipment decontamination, subsurface disposal, landspreading, equipment smelting, and equipment burial was conducted to address concerns regarding the presence of naturally occurring radioactive materials in production waste streams. The assessment evaluated the relative dose of these activities and included a sensitivity analysis of certain input parameters. Future studies and potential policy actions are recommended

  5. Progress in 3D Printing of Carbon Materials for Energy-Related Applications.

    Science.gov (United States)

    Fu, Kun; Yao, Yonggang; Dai, Jiaqi; Hu, Liangbing

    2017-03-01

    The additive-manufacturing (AM) technique, known as three-dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D-printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO-based materials, have been extensively reported for energy-related applications. In these circumstances, understanding the very recent developments of 3D-printed carbon materials and their extended applications to address energy-related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy-related applications are reviewed, including energy-storage applications, electronic circuits, and thermal-energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D-printing technology based on carbon materials for energy-related applications and beyond. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Collection and identification of human remains volatiles by non-contact, dynamic airflow sampling and SPME-GC/MS using various sorbent materials.

    Science.gov (United States)

    DeGreeff, Lauryn E; Furton, Kenneth G

    2011-09-01

    Human remains detection canines are used in locating deceased humans in diverse scenarios and environments based on odor produced during the decay process of the human body. It has been established that human remains detection canines are capable of locating human remains specifically, as opposed to living humans or animal remains, thus suggesting a difference in odor between the different sources. This work explores the collection and determination of such odors using a dynamic headspace concentration device. The airflow rate and three sorbent materials-Dukal cotton gauze, Johnson & Johnson cotton-blend gauze, and polyester material-used for odor collection were evaluated using standard compounds. It was determined that higher airflow rates and openly woven material, e.g., Dukal cotton gauze, yielded significantly less total volatile compounds due to compound breakthrough through the sorbent material. Collection from polymer- and cellulose-based materials demonstrated that the molecular backbone of the material is a factor in compound collection as well. Volatiles, including cyclic and straight-chain hydrocarbons, organic acids, sulfides, aldehydes, ketones, and alcohols, were collected from a population of 27 deceased bodies from two collection locations. The common compounds between the subjects were compared and the odor profiles were determined. These odor profiles were compared with those of animal remains and living human subjects collected in the same manner. Principal component analysis showed that the odor profiles of the three sample types were distinct.

  7. Bringing together raptor collections in Europe for contaminant research and monitoring in relation to chemicals regulations.

    Science.gov (United States)

    Movalli, Paola; Dekker, René; Koschorreck, Jan; Treu, Gabriele

    2017-11-01

    Raptors are good sentinels of environmental contamination and there is good capability for raptor biomonitoring in Europe. Raptor biomonitoring can benefit from natural history museums (NHMs), environmental specimen banks (ESBs) and other collections (e.g. specialist raptor specimen collections). Europe's NHMs, ESBs and other collections hold large numbers of raptor specimens and samples, covering long periods of time. These collections are potentially a valuable resource for contaminant studies over time and space. There are strong needs to monitor contaminants in the environment to support EU and national chemical management. However, data on raptor specimens in NHMs, ESBs and other collections are dispersed, few are digitised, and they are thus not easy to access. Specimen coverage is patchy in terms of species, space and time. Contaminant research with raptors would be facilitated by creating a framework to link relevant collections, digitising all collections, developing a searchable meta-database covering all existing collections, making them more visible and accessible for contaminant research. This would also help identify gaps in coverage and stimulate specimen collection to fill gaps in support of prioritised contaminant monitoring. Collections can further support raptor biomonitoring by making samples available for analysis on request.

  8. Determination of several trace metals in biological materials by PIXE analysis after solvent extraction and polystyrene-film collection

    International Nuclear Information System (INIS)

    Iwata, Yoshihiro; Korenaga, Tatsumi; Suzuki, Nobuo

    1991-01-01

    Traces of vanadium, manganese, iron, cobalt, nickel, copper, and zinc were quantitatively extracted with diethyldithiocarbamate (DDTC) in benzene from a digested solution of biological materials and the metal-DDTC complexes were collected into a small amount of polystyrene foam produced by lyophilization of the benzene extract after addition of polystyrene. The polystyrene foam was dissolved in benzene and spread on Mylar film. After drying, a polystyrene film containing metal-DDTC complexes was produced on Mylar film, and then the polystyrene film was peeled from the Mylar film. This film was subjected to PIXE analysis. This method was applied to NBS SRM 1572 citrus leaves and a marine macroalgal sample, and 6 trace metals were simultaneously and accurately determined. (author)

  9. On the relation between the interacting boson model of Arima and Iachello and the collective model of Bohr and Mottelson

    International Nuclear Information System (INIS)

    Assenbaum, H.J.; Weiguny, A.

    1982-01-01

    The generator coordinate method is used to relate the interacting boson model of Arima and Iachello and the collective model of Bohr and Mottelson through an isometric transformation. It associates complex parameters to the original boson operators whereas the ultimate collective variables are real. The absolute squares of the collective wave functions can be given a direct probability interpretation. The lowest order Bohr-Mottelson hamiltonian is obtained in the harmonic approximation to the interacting boson model; unharmonic coupling terms render the collective potential to be velocity-dependent. (orig.)

  10. Topical issues of psychological research materials on matters related to extremism

    Directory of Open Access Journals (Sweden)

    Sekerazh T.N.

    2014-12-01

    Full Text Available The article deals with methodological support psychological and linguistic research "extremist" materials. Presents a comprehensive psycho-linguistic approach to the examination of information materials on matters related to combating extremism and terrorism, and certain provisions of the methodology developed by the Russian federal center of judicial examination of the Ministry of Justice of the Russian Federation. Based on the analysis of the "verbal" crimes related to criminal legal interpretation of extremism and terrorism, highlighted the types of prohibited public expression of communicative action, corresponding to the seven types of "extremist" values. The article outlines the key features of psychological analysis "extremist" materials research stages. It is shown that the complex (psycho-linguistic approach to the study of materials of extremist orientation, is scientifically sound, methodically proven, appropriate to the needs of law enforcement, judicial and investigative practice.

  11. Loopholes of laws and regulations related to redevelopment of former sites of radioactive material control area

    International Nuclear Information System (INIS)

    Akatsuka, Hiroshi

    2003-01-01

    We found loopholes of laws and regulations for supervising radioactive materials. It is not obliged to measure the soil radioactivity of the sites that were formerly used as scientific or engineering institutes, or hospitals with a radioactive material control area. If the former institutes or hospitals made studies with radioactive materials before the enforcement of the law concerning prevention from radiation hazards due to isotopes and its detailed regulations, it is concluded that there was the period when the radioactive materials were not under management. If it is found that the radioactive materials were applied at the former site before the enforcement of the related laws and regulations, the radioactivity in the soil of the redeveloped area should be examined, which should be obliged by some laws or regulations. (author)

  12. Digital Materials Related to Food Science and Cooking Methods for Preparing Eggs

    OpenAIRE

    沼田, 貴美子; 渡邉, 美奈; ヌマタ, キミコ; ワタナベ, ミナ; Numata, Kimiko; Watanabe, Mina

    2009-01-01

    We studied methods that were effective for teaching cooking to elementary school pupils using home economics materials. The subject was "Iritamago (scrambled eggs)". We researched the relationship between cookery science and experimental methods of making Iritamago. The various differences in condition and texture of Iritamago were compared among the different cooking utensils, conditions, and preparations of eggs. We created digital materials related to cookery science and the cooking method...

  13. Three-Fold Embedding: Farm Development in Relation to Its Socio-Material Context

    Directory of Open Access Journals (Sweden)

    Ron Methorst

    2017-09-01

    Full Text Available Understanding heterogeneity in farm development strategies is important in order to design effective policies and support programs to increase the sustainability of agriculture in relation to its socio-material context. Using a unique case study of 102 dairy farmers in The Netherlands, all operating in a highly similar socio-material context, this paper studies the differences in the relation of farms with the socio-material context. To this end, the concept of three-fold embedding is developed and tested using the ideal-typical characteristics of three patterns of farm development that were identified in the case study: (1 maximising total milk production; (2 optimising milk production using mainly on-farm resources; and (3 diversified on-farm production. Three-fold embedding was conceptualised in relation to the following dimensions: (1 value chain relations; (2 socio-cultural relations; and (3 natural resource relations, while using a scale ranging from a Close to a Stretched set of relations. The concept of three-fold embedding proves to be useful to identify in a non-normative and non-binary manner meaningful differences between patterns of farm development. These differences relate to differences in opportunity identification and strategic decision-making. The concept supports a relational perspective in studying farm strategy development using a sociology of entrepreneurship approach.

  14. MAT-DB - A database for nuclear energy related materials data

    International Nuclear Information System (INIS)

    Over, H.H.

    2009-01-01

    The web-enabled materials database (Mat-DB) of JRC-IE has a long-term history in storing materials test data resulting from European and international research projects. The database structure and the user-guidance has bee permanently updated improved and optimized. The database is implemented in the secure ODIN portal: https://odin.jrc.ec.europa.eu of JRC-IE. This architecture guarantees fast access to confidential and public data and documentation which are stored in an inter-related document management database (DoMa). It is a part of JRC's nuclear knowledge management. Mat-DB hosts the whole pool of IAEA surveillance data of reactor pressure vessel materials from different nuclear power plants of the member states. Mat-DB contains also thousands of European GEN IV reactor systems related R and D materials data which are an important basis for the evaluating and extrapolating design data for candidate materials and setting up design rules covering high temperature exposure, irradiation and corrosion. Those data and rules would match also fusion related components. Mat-DB covers thermo-mechanical and thermo-physical properties data of engineering alloys at low, elevated and high temperatures for base materials and joints, including irradiated materials for nuclear fission and fusion applications, thermal barrier coated materials for gas turbines and properties of corroded materials. The corrosion part refers to weight gain/loss data of high temperature exposed engineering alloys and ceramic materials. For each test type the database structure reflects international test standards and recommendations. Mat-DB features an extensive library of evaluation programs for web-enabled assessment of uniaxial creep, fatigue, crack growth and high temperature corrosion properties. Evaluations can be performed after data retrieval or independently of Mat-DB by transferring other materials data in a given format to the programs. The fast evaluation processes help the user to

  15. 'Low-activation' fusion materials development and related nuclear data needs

    International Nuclear Information System (INIS)

    Cierjacks, S.

    1990-01-01

    So-called ''low-activation'' materials are presently considered as an important means of improving the safety characteristics of future DT fusion reactors. Essential benefits are expected in various problem areas ranging from operation considerations to aspects of decommissioning and waste disposal. Present programs on ''low-activation'' materials development depend strongly on reliable activity calculations for a wide range of technologically important materials. The related nuclear data requirements and important needs for more and improved nuclear data are discussed. (author). 32 refs, 4 figs, 4 tabs

  16. k0-INAA for APM samples collected in period of June 2004 - March 2005 and some marine certified reference materials

    International Nuclear Information System (INIS)

    Dung, Ho Manh; Vu, Cao Dong; Y, Truong; Sy, Nguyen Thi

    2006-01-01

    The airborne particulate matter (APM) samples have been collected in 2004 using two types of polycarbonate membrane filter PM 2.5 and PM 2.5-10 at two sites of industrial (Ho Chi Mihn City) and rural (Dateh) regions in south of Vietnam. Three marine certified reference materials have been selected to establish a k0-NAA procedure for marine samples. The concentration of trace multi-element in the samples has been determined by the k 0 -INAA procedure using K o -DALAT software developed in Dalat NRI. About 28 elements in 224 APM samples collected at two areas of Dateh and HCMC of Vietnam in period from June, 2004 to March, 2005 were presented in report. The statistical analysis was applied to the data set to investigate the pollution source at sampling sites. The results proved that the k 0 -NAA on the Dalat research reactor is a reliable and effective analytical technique for characterization of trace multi-element in APM and marine samples for air and marine environmental pollution study in Vietnam. (author)

  17. Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

    Science.gov (United States)

    Heintze, S D; Forjanic, M; Ohmiti, K; Rousson, V

    2010-04-01

    (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. There was a significant interaction between material and load as well as between load and brushing time (pgloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be

  18. Synthesis, Properties, and Applications of Low-Dimensional Carbon-Related Nano materials

    International Nuclear Information System (INIS)

    Mostofizadeh, A.; Li, Y.; Song, B.; Huang, Y.; Mostofizadeh, A.

    2011-01-01

    In recent years, many theoretical and experimental studies have been carried out to develop one of the most interesting aspects of the science and nano technology which is called carbon-related nano materials. The goal of this paper is to provide a review of some of the most exciting and important developments in the synthesis, properties, and applications of low-dimensional carbon nano materials. Carbon nano materials are formed in various structural features using several different processing methods. The synthesis techniques used to produce specific kinds of low-dimensional carbon nano materials such as zero-dimensional carbon nano materials (including fullerene, carbon-encapsulated metal nanoparticles, nano diamond, and onion-like carbons), one-dimensional carbon nano materials (including carbon nano fibers and carbon nano tubes), and two-dimensional carbon nano materials (including graphene and carbon nano walls) are discussed in this paper. Subsequently, the paper deals with an overview of the properties of the mainly important products as well as some important applications and the future outlooks of these advanced nano materials.

  19. What Data Do States Collect Related to School Nurses, School Health, and the Health Care Provided?

    Science.gov (United States)

    Selekman, Janice; Wolfe, Linda C.; Cole, Marjorie

    2016-01-01

    School nurses collect data to report to their school district and state agencies. However, there is no national requirement or standard to collect specific data, and each state determines its own set of questions. This study resulted from a joint resolution between the National Association of State School Nurse Consultants and the National…

  20. 75 FR 77956 - Agency Information Collection (Annual Certification of Veteran Status and Veteran-Relatives...

    Science.gov (United States)

    2010-12-14

    ... Administration (VBA), Department of Veterans Affairs, will submit the collection of information abstracted below... Review: Extension of a currently approved collection. Abstract: VBA employees, non-VBA employees in VBA space and Veteran Service Organization employees who have access to VA's benefit records complete VA...

  1. Arranging the Pieces: A Survey of Library Practices Related to a Tabletop Game Collection

    Directory of Open Access Journals (Sweden)

    Teresa Slobuski

    2017-03-01

    Full Text Available Objective – The purpose of this study is to explore collection development, cataloguing, processing, and circulation practices for tabletop game collections in libraries. This study used the term “tabletop games” to refer to the array of game styles that are played in real-world, social settings, such as board games, dice and card games, collectible card games, and role-playing games. Methods – An online survey regarding tabletop games in libraries was developed with input from academic, public, and school librarians. Participants were recruited utilizing a snowball sampling technique involving electronic outlets and discussion lists used by librarians in school, public, and academic libraries. Results – One hundred nineteen libraries answered the survey. The results show that tabletop games have a presence in libraries, but practices vary in regard to collection development, cataloguing, processing, and circulation. Conclusion – Results indicate that libraries are somewhat fragmented in their procedures for tabletop collections. Libraries can benefit from better understanding how others acquire, process, and use these collections. Although they are different to other library collections, tabletop games do not suffer from extensive loss and bibliographic records are becoming more available. Best practices and guidance are still needed to fully integrate games into libraries and to help librarians feel comfortable piloting their own tabletop collections.

  2. Summary of Blast Shield and Material Testing for Development of Solid Debris Collection at the National Ignition Facility (NIF)

    International Nuclear Information System (INIS)

    Shaughnessy, D.A.; Gostic, J.M.; Moody, K.J.; Grant, P.M.; Lewis, L.A.; Hutcheon, I.D.

    2011-01-01

    The ability to collect solid debris from the target chamber following a NIF shot has application for both capsule diagnostics, particularly for fuel-ablator mix, and measuring cross sections relevant to the Stockpile Stewardship program and nuclear astrophysics. Simulations have shown that doping the capsule with up to 10 15 atoms of an impurity not otherwise found in the capsule does not affect its performance. The dopant is an element that will undergo nuclear activations during the NIF implosion, forming radioactive species that can be collected and measured after extraction from the target chamber. For diagnostics, deuteron or alpha induced reactions can be used to probe the fuel-ablator mix. For measuring neutron cross sections, the dopant should be something that is sensitive to the 14 MeV neutrons produced through the fusion of deuterium and tritium. Developing the collector is a challenge due to the extreme environment of the NIF chamber. The collector surface is exposed to a large photon flux from x-rays and unconverted laser light before it is exposed to a debris wind that is formed from vaporized material from the target chamber center. The photons will ablate the collector surface to some extent, possibly impeding the debris from reaching the collector and sticking. In addition, the collector itself must be mechanically strong enough to withstand the large amount of energy it will be exposed to, and it should be something that will be easy to count and chemically process. In order to select the best material for the collector, a variety of different metals have been tested in the NIF chamber. They were exposed to high-energy laser shots in order to evaluate their postshot surface characterization, morphology, degree of melt, and their ability to retain debris from the chamber center. The first set of samples consisted of 1 mm thick pieces of aluminum that had been fielded in the chamber as blast shields protecting the neutron activation diagnostic. Ten

  3. PWR composite materials use. A particular case of safety-related service water pipes

    International Nuclear Information System (INIS)

    Pays, M.F.; Le Courtois, T.

    1997-11-01

    This paper shows the present and future uses of composite materials in French nuclear and fossil-fuel power plants. Electricite de France has decided to install composite materials in service water piping in its future nuclear power plant (PWR) at Civaux (West of France) and for the firs time in France, in safety-related applications. A wide range of studies has been performed about the durability, the control and damage mechanisms of those materials under service conditions among an ongoing Research and Development project. The main results are presented under the following headlines: selection of basic materials and manufacturing processes; aging processes (mechanical behavior during 'lifetime'); design rules; non destructive examination during manufacturing process and during operation. The studies have been focused on epoxy pipings. The importance of strong quality insurance policy requirements are outlined. A study of the use of composite pipes in power plants (hydraulic, fossil fuel, and nuclear) in France and around the world (USA, Japan, Western Europe) are presented whether it be safety related or non safety-related applications. The different technical solutions for materials and manufacturing processes are presented and an economic comparison is made between steel and composite pipes. (author)

  4. PWR composite materials use. A particular case of safety-related service water pipes

    Energy Technology Data Exchange (ETDEWEB)

    Pays, M.F.; Le Courtois, T

    1997-11-01

    This paper shows the present and future uses of composite materials in French nuclear and fossil-fuel power plants. Electricite de France has decided to install composite materials in service water piping in its future nuclear power plant (PWR) at Civaux (West of France) and for the firs time in France, in safety-related applications. A wide range of studies has been performed about the durability, the control and damage mechanisms of those materials under service conditions among an ongoing Research and Development project. The main results are presented under the following headlines: selection of basic materials and manufacturing processes; aging processes (mechanical behavior during `lifetime`); design rules; non destructive examination during manufacturing process and during operation. The studies have been focused on epoxy pipings. The importance of strong quality insurance policy requirements are outlined. A study of the use of composite pipes in power plants (hydraulic, fossil fuel, and nuclear) in France and around the world (USA, Japan, Western Europe) are presented whether it be safety related or non safety-related applications. The different technical solutions for materials and manufacturing processes are presented and an economic comparison is made between steel and composite pipes. (author) 2 refs.

  5. The generalized Cauchy relation: a probe for local structure in materials with isotropic symmetry

    Energy Technology Data Exchange (ETDEWEB)

    Bactavatchalou, R [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Alnot, P [Universite Henri Poincare, Nancy I (France); Bailer, J [Universite du Luxembourg (Luxembourg); Kolle, M [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Mueller, U [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Philipp, M [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Possart, W [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Rouxel, D [Universite Henri Poincare, Nancy I (France); Sanctuary, R [Universite du Luxembourg (Luxembourg); Tschoepe, A [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Vergnat, Ch [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg); Wetzel, B [Institut fuer Verbundwerkstoffe TU Kaiserslautern 67663 Kaiserslautern (Germany); Krueger, J K [Laboratoire Europeen de Recherche Universitaire Saarland- Lorraine- Luxembourg at Universitaet des Saarlandes (Luxembourg)

    2006-05-15

    The elastic properties of the isotropic state of condensed matter are given by the elastic constants ell and c44. In the liquid state the static shear stiffness c44 vanishes whereas at sufficient high probe frequencies a dynamic shear stiffness may appear. In that latter case the question about the existence of a Cauchy relation appears. It will be shown that a pure Cauchy relation can appear only under special conditions which are rarely fulfilled. For all investigated materials, including ceramics, liquids and glasses, a linear relation between ell and c44 called generalized Cauchy relation is observed, which, surprisingly, follows a linear transformation.

  6. Evidence on dynamic effects in the water content – water potential relation of building materials

    DEFF Research Database (Denmark)

    Scheffler, Gregor Albrecht; Plagge, Rudolf

    2008-01-01

    static and dynamic moisture storage data and the more pronounced was the corresponding dynamic hysteresis. The paper thus provides clear experimental evidence on dynamic effects in the water content – water potential relation of building materials. By that, data published by previous authors as Topp et......Hygrothermal simulation has become a widely applied tool for the design and assessment of building structures under possible indoor and outdoor climatic conditions. One of the most important prerequisites of such simulations is reliable material data. Different approaches exist here to derive...... the required material functions, i.e. the moisture storage characteristic and the liquid water conductivity, from measured basic properties. The current state of the art in material modelling as well as the corresponding transport theory implies that the moisture transport function is unique...

  7. Materials-Related Aspects of Thermochemical Water and Carbon Dioxide Splitting: A Review

    Directory of Open Access Journals (Sweden)

    Robert Pitz-Paal

    2012-10-01

    Full Text Available Thermochemical multistep water- and CO2-splitting processes are promising options to face future energy problems. Particularly, the possible incorporation of solar power makes these processes sustainable and environmentally attractive since only water, CO2 and solar power are used; the concentrated solar energy is converted into storable and transportable fuels. One of the major barriers to technological success is the identification of suitable active materials like catalysts and redox materials exhibiting satisfactory durability, reactivity and efficiencies. Moreover, materials play an important role in the construction of key components and for the implementation in commercial solar plants. The most promising thermochemical water- and CO2-splitting processes are being described and discussed with respect to further development and future potential. The main materials-related challenges of those processes are being analyzed. Technical approaches and development progress in terms of solving them are addressed and assessed in this review.

  8. Hot cell works and related irradiation tests in fission reactor for development of new materials for nuclear application

    International Nuclear Information System (INIS)

    Shikama, Tatsuo

    1999-01-01

    Present status of research works in Oarai Branch, Institute for Materials Research, Tohoku University, utilizing Japan Materials Testing Reactor and related hot cells will be described.Topics are mainly related with nuclear materials studies, excluding fissile materials, which is mainly aiming for development of materials for advanced nuclear systems such as a nuclear fusion reactor. Conflict between traditional and routined procedures and new demands will be described and future perspective is discussed. (author)

  9. Competence-Based, Research-Related Lab Courses for Materials Modeling: The Case of Organic Photovoltaics

    Science.gov (United States)

    Schellhammer, Karl Sebastian; Cuniberti, Gianaurelio

    2017-01-01

    We are hereby presenting a didactic concept for an advanced lab course that focuses on the design of donor materials for organic solar cells. Its research-related and competence-based approach qualifies the students to independently and creatively apply computational methods and to profoundly and critically discuss the results obtained. The high…

  10. Three-fold embedding : farm developement in relation to its socio-material context

    NARCIS (Netherlands)

    Methorst, R.; Roep, D.; Verstegen, J.

    2017-01-01

    Understanding heterogeneity in farm development strategies is important in order to design effective policies and support programs to increase the sustainability of agriculture in relation to its socio-material context. Using a unique case study of 102 dairy farmers in The Netherlands, all operating

  11. The role of absorbent building materials in moderating changes of relative humidity

    DEFF Research Database (Denmark)

    Padfield, Tim

    The problem studied in this work is, how porous, absorbent materials surroundning or placed in a room influence the relative humidity of the room. This is of interest in designing precautions and machinery to monitor the indoor climate in museums and dwelling rooms. - A novel technique for the in...

  12. Doorways III: Teacher Reference Materials. On School-Related Gender-Based Violence Prevention and Response

    Science.gov (United States)

    US Agency for International Development, 2009

    2009-01-01

    The Doorways training program was designed by the U.S. Agency for International Development (USAID)-funded Safe Schools Program (Safe Schools) to enable teachers, community members and students to prevent and respond to school-related gender-based violence (SRGBV). This booklet, "Doorways III: Teacher Reference Materials on School-Related…

  13. On the derivative of the stress-strain relation in a no-tension material

    Czech Academy of Sciences Publication Activity Database

    Padovani, C.; Šilhavý, Miroslav

    2017-01-01

    Roč. 22, č. 7 (2017), s. 1606-1618 ISSN 1081-2865 Institutional support: RVO:67985840 Keywords : no-tension material * stress-strain relation Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics Impact factor: 2.953, year: 2016 http:// journals .sagepub.com/doi/10.1177/1081286515571786

  14. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship

    Directory of Open Access Journals (Sweden)

    Dean Wesley R

    2012-05-01

    Full Text Available Abstract Introduction Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Methods Field notes were provided by teams of promotora-researchers (indigenous community health workers and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Results Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on

  15. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship.

    Science.gov (United States)

    Dean, Wesley R; Sharkey, Joseph R; Johnson, Cassandra M; St John, Julie

    2012-05-15

    BSTRACT: Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities) along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Field notes were provided by teams of promotora-researchers (indigenous community health workers) and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day) within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on inexpensive staple foods and dishes, and

  16. Use of self-collected capillary blood samples for islet autoantibody screening in relatives: a feasibility and acceptability study.

    Science.gov (United States)

    Liu, Y; Rafkin, L E; Matheson, D; Henderson, C; Boulware, D; Besser, R E J; Ferrara, C; Yu, L; Steck, A K; Bingley, P J

    2017-07-01

    To evaluate the feasibility of using self-collected capillary blood samples for islet autoantibody testing to identify risk in relatives of people with Type 1 diabetes. Participants were recruited via the observational TrialNet Pathway to Prevention study, which screens and monitors relatives of people with Type 1 diabetes for islet autoantibodies. Relatives were sent kits for capillary blood collection, with written instructions, an online instructional video link and a questionnaire. Sera from capillary blood samples were tested for autoantibodies to glutamic acid decarboxylase, islet antigen-2, insulin and zinc transporter 8. 'Successful' sample collection was defined as obtaining sufficient volume and quality to provide definitive autoantibody results, including confirmation of positive results by repeat assay. In 240 relatives who returned samples, the median (range) age was 15.5 (1-49) years and 51% were male. Of these samples, 98% were sufficient for glutamic acid decarboxylase, islet antigen-2 and zinc transporter 8 autoantibody testing and 84% for insulin autoantibody testing and complete autoantibody screen. The upper 90% confidence bound for unsuccessful collection was 4.4% for glutamic acid decarboxylase, islet antigen-2 and/or zinc transporter 8 autoantibody assays, and 19.3% for insulin autoantibodies. Despite 43% of 220 questionnaire respondents finding capillary blood collection uncomfortable or painful, 82% preferred home self-collection of capillary blood samples compared with outpatient venepuncture (90% of those aged 18 years). The perceived difficulty of collecting capillary blood samples did not affect success rate. Self-collected capillary blood sampling offers a feasible alternative to venous sampling, with the potential to facilitate autoantibody screening for Type 1 diabetes risk. © 2017 Diabetes UK.

  17. Hydrological dispersion of radioactive material in relation to nuclear power plant siting

    International Nuclear Information System (INIS)

    1985-01-01

    This Guide discusses the dispersion of normal and accidental releases of radioactive materials from nuclear power plants into surface water, including the washout of airborne radionuclides, and gives recommendations on information to be collected during the various stages of the siting procedure, a minimum measurement programme and the selection and validation of appropriate mathematical models for predicting dispersion. Guidelines are also provided for the optimal use of models for a specific site situation and for defining the necessary input parameters. Results of existing validation studies are given

  18. The IAEA inventory databases related to radioactive material entering the marine environment

    International Nuclear Information System (INIS)

    Rastogi, R.C.; Sjoeblom, K.L.

    1999-01-01

    Contracting Parties to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and other Matter (LC 1972) have requested the IAEA to develop an inventory of radioactive material entering the marine environment from all sources. The rationale for developing and maintaining the inventory is related to its use as an information base with which the impact of radionuclides entering the marine environment from different sources can be assessed and compared. Five anthropogenic sources of radionuclides entering the marine environment can be identified. These sources are: radioactive waste disposal at sea; accidents and losses at sea involving radioactive material; discharge of low level liquid effluents from land-based nuclear facilities; the fallout from nuclear weapons testing; and accidental releases from land-based nuclear facilities. The first two of these sources are most closely related to the objective of the LC 1972 and its request to the IAEA. This paper deals with the Agency's work on developing a database on radioactive material entering the marine environment from these two sources. The database has the acronym RAMEM (RAdioactive Material Entering the Marine Environment). It includes two modules: inventory of radioactive waste disposal at sea and inventory of accidents and losses at sea involving radioactive material

  19. Nature of events and alcohol-related content in marketing materials at a university freshers' fair: a summative content analysis.

    Science.gov (United States)

    Fuller, A; Fleming, K M; Szatkowski, L; Bains, M

    2017-12-15

    The transition to university is a potentially influential time upon students' drinking behaviour. This study explored the nature of activities and alcohol-related content in marketing materials from student-led societies and local businesses provided to students, at a university freshers' fair in the UK. All marketing materials handed out at the fair were collected across the 5-day event in September 2015. Written and visual content was analysed using a summative qualitative content analysis. Most student-led societies promoted social events they were hosting (n = 530), most of which took place in a drinking venue or referred to drinking (n = 335). Only four explicitly alcohol-free events were promoted. Student-led societies also promoted activities relating to their interest, e.g. sports training (n = 519), a small proportion of which had references to drinking and drinking venues (n = 54). Three societies provided promotional handouts from local bars or nightclubs. Local bars, pubs and nightclubs promoted events they hosted (n = 81) as well as alcoholic drink promotions (n = 79) and alcohol branded advertising (n = 22), albeit infrequently for the latter. In the first week of university, students are exposed to alcohol-related events, promotions and advertising, which may act as an incentive to participate in drinking. © The Author(s) 2017. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  20. Experimental Measurement of Relative Permeability Functions for Fuel Cell GDL Materials

    KAUST Repository

    Hussaini, Irfan; Wang, Chao-Yang

    2009-01-01

    Gas diffusion layer in PEM fuel cells plays a pivotal role in water management. Modeling of liquid water transport through the GDL relies on knowledge of relative permeability functions in the in-plane and through-plane directions. In the present work, air and water relative permeabilities are experimentally determined as functions of saturation for typical GDL materials such as Toray-060, -090, -120 carbon paper and E-Tek carbon cloth materials in their plain, untreated forms. Saturation is measured using an ex-situ gravimetric method. Absolute and relative permeability functions in the two directions of interest are presented. Significant departure from the generally assumed cubic function of saturation is observed. ©The Electrochemical Society.

  1. Comparison of relative INAA and k0-INAA using soil and sediment reference materials

    International Nuclear Information System (INIS)

    Jacimovic, R.

    2014-01-01

    The objective of this work was to compare the results obtained by the relative INAA and k 0 -INAA methods for the same input parameters (sample mass, nuclear data, net peak area for the same gamma line and the same measurement and same cooling and measurement times). In total eight environmental soil and sediment reference materials (RM) or certified reference materials (CRM) from different producers were analysed. In this work only the recommended or certified values were considered, allowing comparison of the two methods for 30 elements. The results point out that k 0 -INAA possesses superior qualities compared to relative INAA, being insensitive to flux gradients, and independent of recommended/certified values in RMs/CRMs, often used as standards in relative INAA. (author)

  2. Risks and reliability of manufacturing processes as related to composite materials for spacecraft structures

    Science.gov (United States)

    Bao, Han P.

    1995-01-01

    Fabricating primary aircraft and spacecraft structures using advanced composite materials entail both benefits and risks. The benefits come from much improved strength-to-weight ratios and stiffness-to-weight ratios, potential for less part count, ability to tailor properties, chemical and solvent resistance, and superior thermal properties. On the other hand, the risks involved include high material costs, lack of processing experience, expensive labor, poor reproducibility, high toxicity for some composites, and a variety of space induced risks. The purpose of this project is to generate a manufacturing database for a selected number of materials with potential for space applications, and to rely on this database to develop quantitative approaches to screen candidate materials and processes for space applications on the basis of their manufacturing risks including costs. So far, the following materials have been included in the database: epoxies, polycyanates, bismalemides, PMR-15, polyphenylene sulfides, polyetherimides, polyetheretherketone, and aluminum lithium. The first four materials are thermoset composites; the next three are thermoplastic composites, and the last one is is a metal. The emphasis of this database is on factors affecting manufacturing such as cost of raw material, handling aspects which include working life and shelf life of resins, process temperature, chemical/solvent resistance, moisture resistance, damage tolerance, toxicity, outgassing, thermal cycling, and void content, nature or type of process, associate tooling, and in-process quality assurance. Based on industry experience and published literature, a relative ranking was established for each of the factors affecting manufacturing as listed above. Potential applications of this database include the determination of a delta cost factor for specific structures with a given process plan and a general methodology to screen materials and processes for incorporation into the current

  3. 77 FR 64533 - Agency Information Collection Activities: Regulations Relating to Recordation and Enforcement of...

    Science.gov (United States)

    2012-10-22

    ... the collection of information (a total capital/startup costs and operations and maintenance costs... Management and Budget (OMB) approval. All comments will become a matter of public record. In this document... intellectual property rights for which federal law provides import protection. Respondents may submit their...

  4. 75 FR 24731 - Agency Information Collection Activities: Regulations Relating to Recordation and Enforcement of...

    Science.gov (United States)

    2010-05-05

    ... respondents or record keepers from the collection of information (a total of capital/startup costs and... request for Office of Management and Budget (OMB) approval. All comments will become a matter of public... and determine if such goods infringe on [[Page 24732

  5. Sexual-Minority College Women's Experiences with Discrimination: Relations with Identity and Collective Action

    Science.gov (United States)

    Friedman, Carly; Leaper, Campbell

    2010-01-01

    This study examined sexual-minority women's reports of sexism, heterosexism, and gendered heterosexism (discrimination that is both sexist and heterosexist) as predictors of social identity and collective action during college. A measure of gendered heterosexism was developed that assesses women's experiences with discrimination that is…

  6. Transportation safety aspects of ore and related material - inconsistencies in current exemption values

    International Nuclear Information System (INIS)

    Rawl, R.R.; Leggett, R.W.; Eckerman, K.F.; Cook, J.R.

    2004-01-01

    The IAEA's system for exemption of material from the transport regulations is based on the fundamental principle that exemption values should be commensurate with the risk posed by the material, as represented by effective dose and skin dose. Important departures from that principle as well as inconsistencies between exemption values for different radionuclides have resulted from special provisions for natural materials that depend on their intended use, and from exposure scenarios and other assumptions and rules used in the derivation of exemption values. This paper examines the sources and extent of inconsistencies in exemption values for transport, particularly as they relate to naturally occurring radionuclides, and suggests ways to achieve greater internal consistency in exemption values as well as greater consistency with the fundamental principle underlying the current system

  7. Collection of human reaction times and supporting health related data for analysis of cognitive and physical performance

    Directory of Open Access Journals (Sweden)

    Petr Brůha

    2018-04-01

    Full Text Available Smoking, excessive drinking, overeating and physical inactivity are well-established risk factors decreasing human physical performance. Moreover, epidemiological work has identified modifiable lifestyle factors, such as poor diet and physical and cognitive inactivity that are associated with the risk of reduced cognitive performance. Definition, collection and annotation of human reaction times and suitable health related data and metadata provides researchers with a necessary source for further analysis of human physical and cognitive performance. The collection of human reaction times and supporting health related data was obtained from two groups comprising together 349 people of all ages - the visitors of the Days of Science and Technology 2016 held on the Pilsen central square and members of the Mensa Czech Republic visiting the neuroinformatics lab at the University of West Bohemia. Each provided dataset contains a complete or partial set of data obtained from the following measurements: hands and legs reaction times, color vision, spirometry, electrocardiography, blood pressure, blood glucose, body proportions and flexibility. It also provides a sufficient set of metadata (age, gender and summary of the participant's current life style and health to allow researchers to perform further analysis. This article has two main aims. The first aim is to provide a well annotated collection of human reaction times and health related data that is suitable for further analysis of lifestyle and human cognitive and physical performance. This data collection is complemented with a preliminarily statistical evaluation. The second aim is to present a procedure of efficient acquisition of human reaction times and supporting health related data in non-lab and lab conditions. Keywords: Reaction time, Health related data, Cognitive and physical performance, Chronic disease, Data acquisition, Data collection, Software for data collection

  8. Impact of donor- and collection-related variables on product quality in ex utero cord blood banking.

    Science.gov (United States)

    Askari, Sabeen; Miller, John; Chrysler, Gayl; McCullough, Jeffrey

    2005-02-01

    Optimizing product quality is a current focus in cord blood banking. This study evaluates the role of selected donor- and collection-related variables. Retrospective review was performed of cord blood units (CBUs) collected ex utero between February 1, 2000, and February 28, 2002. Preprocessing volume and total nucleated cell (TNC) counts and postprocessing CD34 cell counts were used as product quality indicators. Of 2084 CBUs, volume determinations and TNC counts were performed on 1628 and CD34+ counts on 1124 CBUs. Mean volume and TNC and CD34+ counts were 85.2 mL, 118.9 x 10(7), and 5.2 x 10(6), respectively. In univariate analysis, placental weight of greater than 500 g and meconium in amniotic fluid correlated with better volume and TNC and CD34+ counts. Greater than 40 weeks' gestation predicted enhanced volume and TNC count. Cesarean section, two- versus one-person collection, and not greater than 5 minutes between placental delivery and collection produced superior volume. Increased TNC count was also seen in Caucasian women, primigravidae, female newborns, and collection duration of more than 5 minutes. A time between delivery of newborn and placenta of not greater than 10 minutes predicted better volume and CD34+ count. By regression analysis, collection within not greater than 5 minutes of placental delivery produced superior volume and TNC count. Donor selection and collection technique modifications may improve product quality. TNC count appears to be more affected by different variables than CD34+ count.

  9. Fuel-related Emissions from the Croatian Municipal Solid Waste Collection System in 2013: Mixed Municipal Waste

    Directory of Open Access Journals (Sweden)

    Anamarija Grbeš

    2018-01-01

    Full Text Available Waste removal (collection and landfilling in the Republic of Croatia is the responsibility of the municipalities and local governments in 21 administrative units (counties. They entrust the respective economic activity to 208 private and public companies specialized in waste collection and treatment. Organised waste collection affects 99 % of the population. The mixed waste from households and enterprises is at various frequencies collected at the door (kerbside collection and transported by truck to a landfill, or processing plant. This article aims to estimate fuel consumption and fuel-related airborne emissions from the collection of mixed municipal waste in Croatia in 2013. The input data and emission results are shown for Croatia and each Croatian county, in total, and relative to the number of inhabitants and mass of collected waste. Annual consumption of diesel for the collection of mixed waste is estimated at 10.6 million litres. At the county level, fuel consumption ranges from 87 thousand litres to 2.2 million litres, on average 504 thousand litres per county. Total emission of CO2 is estimated at 28 000 t, which at county level ranges from 231 to 5711 t. Relative emission ranges from 3.3 to 13 kg CO2 per capita (average 6.6 kg per capita, or 8.6–28.1 kg t−1 of municipal waste (average 17 kg CO2 per ton of municipal waste. The average values of CO2 emission from MSW collection that should also be the target values are 7–9 kg for mixed waste, and 8–15 kg CO2 for separate waste streams. Apart from CO2 emission, this research estimates emission of other, diesel combustion related compounds, such as NOx, CO, lubricant related CO2, NMVOC, PM, f-BC, N2O, SO2, NH3, Pb, ID[1,2,3-cd]P, B[k]F, B[b]F, B[a]P, as well as total distance of transport.

  10. A relation to predict the failure of materials and potential application to volcanic eruptions and landslides.

    Science.gov (United States)

    Hao, Shengwang; Liu, Chao; Lu, Chunsheng; Elsworth, Derek

    2016-06-16

    A theoretical explanation of a time-to-failure relation is presented, with this relationship then used to describe the failure of materials. This provides the potential to predict timing (tf - t) immediately before failure by extrapolating the trajectory as it asymptotes to zero with no need to fit unknown exponents as previously proposed in critical power law behaviors. This generalized relation is verified by comparison with approaches to criticality for volcanic eruptions and creep failure. A new relation based on changes with stress is proposed as an alternative expression of Voight's relation, which is widely used to describe the accelerating precursory signals before material failure and broadly applied to volcanic eruptions, landslides and other phenomena. The new generalized relation reduces to Voight's relation if stress is limited to increase at a constant rate with time. This implies that the time-derivatives in Voight's analysis may be a subset of a more general expression connecting stress derivatives, and thus provides a potential method for forecasting these events.

  11. Alternative approaches of SiC & related wide bandgap materials in light emitting & solar cell applications

    Science.gov (United States)

    Wellmann, Peter; Syväjärvi, Mikael; Ou, Haiyan

    2014-03-01

    silicon oxycarbide material can provide potential applications of the Eu luminescent materials to challenging conditions like high temperatures or aggressive environments where the silica has weaknesses. In some approaches, silicon rich silicon oxide that contain silicon nanoclusters emit red to near infrared luminescence due to quantum confinement effects while luminescence at shorter wavelength is difficult due to the interplay of defects and quantum confinement effects. In addition it is applicable as low-k dielectric, etch-stop and passivation layers. It also has an optical band-gap that is smaller than that of SiO2 which may facilitate carrier injection at lower voltages that is suitable for optoelectronics. From materials perspective of emerging materials, it seems distant to consider system related issues. The future demands on communication and lighting devices require higher information flows in modernized optical devices, for example by replacing electrical interconnects with their optical counterparts and tunable backgrounds filters for integrated optics or photonics applications. However, there are materials issues related to such device performance, for example by a non-linearity, that provide the possibility for selective removal or addition of wavelengths using hetero structures in which one side of the structure enhances the light-to-dark sensitivity of long and medium wavelength channels and diminish others, and an opposite behavior in other face of the structure. Certainly materials may be applied in various innovative ways to provide new performances in devices and systems. In any materials and device evaluation, reliability issues in passivation and packaging of semiconductor device structures provide a base knowledge that may be used to evaluate new concepts. Fundamental aspects of dielectric constant, bandgap and band offsets between the valence and conduction band edges between the passivation layer and the semiconductor create a foundation for

  12. Material constraints related to storage of future European renewable electricity surpluses with CO_2 methanation

    International Nuclear Information System (INIS)

    Meylan, Frédéric D.; Moreau, Vincent; Erkman, Suren

    2016-01-01

    The main challenges associated with a growing production of renewable electricity are intermittency and dispersion. Intermittency generates spikes in production, which need to be curtailed when exceeding consumption. Dispersion means electricity has to be transported over long distances between production and consumption sites. In the Directive 2009/28/EC, the European Commission recommends sustainable and effective measures to prevent curtailments and facilitate transportation of renewable electricity. This article explores the material constraints of storing and transporting surplus renewable electricity by conversion into synthetic methane. Europe is considered for its mix of energy technologies, data availability and multiple energy pathways to 2050. Results show that the requirements for key materials and land remain relatively low, respecting the recommendations of the EU Commission. By 2050, more than 6 million tons of carbon dioxide might be transformed into methane annually within the EU. The efficiency of renewable power methane production is also compared to the natural process of converting solar into chemical energy (i.e. photosynthesis), both capturing and reenergizing carbon dioxide. Overall, the production of renewable methane (including carbon dioxide capture) is more efficient and less material intensive than the production of biofuels derived from photosynthesis and biomass conversion. - Highlights: •The potential of methanation to store renewable electricity surpluses is assessed. •Material constraints are relatively low. •Biogenic CO_2 will probably be insufficient. •Production of renewable power methane is more efficient than conventional biofuels. •Renewable power methane can help decarbonizing the global energy sector.

  13. Theorising international monetary relations: three questions about the significance of materiality

    Directory of Open Access Journals (Sweden)

    Anna Leander

    2015-12-01

    Full Text Available Abstract This article engages a conversation with Benjamin Cohen by raising three questions about the significance of materiality. The paper's questions focus on how materiality can be included in theorizations so that its political import is not defined away from the outset. The article does this focussing on Cohen's treatment of electronic money and its significance for the Politics of International Monetary Relations. The first question posed is about ontology, the second about agency and the third about the scope of politics. The three questions are raised as a conversation in which arguments and counterarguments are advanced. The questions are therefore posed with Cohen's contributions to theorizing the political significance of materiality as their point of departure. They are formulated as a consequence of bringing these contributions in relation to insights from the Social Studies of Finance. From this perspective it would seem that a more far reaching engagement with materiality (in terms of ontology, agency and epistemology is necessary to capture its political significance for international monetary politics and currency hierarchies. The article does not conclude in conventional fashion but purposefully strives to leave these questions open for discussion.

  14. Room-temperature Electrochemical Synthesis of Carbide-derived Carbons and Related Materials

    Energy Technology Data Exchange (ETDEWEB)

    Gogotsi, Yury [Drexel Univ., Philadelphia, PA (United States). Nanomaterials Group. Materials Science and Engineering Dept.

    2015-02-28

    This project addresses room-temperature electrochemical etching as an energy-efficient route to synthesis of 3D nanoporous carbon networks and layered 2D carbons and related structures, as well as provides fundamental understanding of structure and properties of materials produced by this method. Carbide-derived-carbons (CDCs) are a growing class of nanostructured carbon materials with properties that are desirable for many applications, such as electrical energy and gas storage. The structure of these functional materials is tunable by the choice of the starting carbide precursor, synthesis method, and process parameters. Moving from high-temperature synthesis of CDCs through vacuum decomposition above 1400°C and chlorination above 400°C, our studies under the previous DOE BES support led to identification of precursor materials and processing conditions for CDC synthesis at temperatures as low as 200°C, resulting in amorphous and highly reactive porous carbons. We also investigated synthesis of monolithic CDC films from carbide films at 250-1200°C. The results of our early studies provided new insights into CDC formation, led to development of materials for capacitive energy storage, and enabled fundamental understanding of the electrolyte ions confinement in nanoporous carbons.

  15. Longitudinal relations between adolescents' materialism and prosocial behavior toward family, friends, and strangers.

    Science.gov (United States)

    Yang, Zhixu; Fu, Xinyuan; Yu, Xiaoxia; Lv, Yichen

    2018-01-01

    The present study examines the short-term changes and longitudinal relations between adolescents' materialism and prosocial behavior toward family, friends, and strangers over a year. A total of 434 Chinese adolescents (mean age at Time 1 = 11.27; 54% girls) participated in the two time points. From 6 th grade to 7 th grade, boys' and girls' materialism increased, whereas their prosocial behavior toward family, friends, and strangers declined, despite the stable trend in boys' prosocial behavior toward strangers. Furthermore, a cross-lagged model was conducted and the results showed that, adolescent materialism was associated longitudinally with decreased prosocial behavior toward friends and strangers, but not toward family. However, earlier prosocial behavior toward family, friends, and strangers were not associated with subsequent adolescent materialism. The findings point toward an understanding of materialism as a precursor rather than an outcome or byproduct to prosocial behavior. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  16. Basic considerations for the preparation of performance testing materials as related to performance evaluation acceptance criteria

    International Nuclear Information System (INIS)

    McCurdy, D.E.; Morton, J.S.

    2001-01-01

    The preparation of performance testing (PT) materials for environmental and radiobioassay applications involves the use of natural matrix materials containing the analyte of interest, the addition (spiking) of the analyte to a desired matrix (followed by blending for certain matrices) or a combination of the two. The distribution of the sample analyte concentration in a batch of PT samples will reflect the degree of heterogeneity of the analyte in the PT material and/or the reproducibility of the sample preparation process. Commercial and government implemented radioanalytical performance evaluation programs have a variety of acceptable performance criteria. The performance criteria should take into consideration many parameters related to the preparation of the PT materials including the within and between sample analyte heterogeneity, the accuracy of the quantification of an analyte in the PT material and to what 'known' value will a laboratory's result be compared. How sample preparation parameters affect the successful participation in performance evaluation (PE) programs having an acceptance criteria established as a percent difference from a 'known' value or in PE programs using other acceptance criteria, such as the guidance provided in ANSI N42.22 and N13.30 is discussed. (author)

  17. Materials-related issues in the safety and licensing of nuclear fusion facilities

    Science.gov (United States)

    Taylor, N.; Merrill, B.; Cadwallader, L.; Di Pace, L.; El-Guebaly, L.; Humrickhouse, P.; Panayotov, D.; Pinna, T.; Porfiri, M.-T.; Reyes, S.; Shimada, M.; Willms, S.

    2017-09-01

    Fusion power holds the promise of electricity production with a high degree of safety and low environmental impact. Favourable characteristics of fusion as an energy source provide the potential for this very good safety and environmental performance. But to fully realize the potential, attention must be paid in the design of a demonstration fusion power plant (DEMO) or a commercial power plant to minimize the radiological hazards. These hazards arise principally from the inventory of tritium and from materials that become activated by neutrons from the plasma. The confinement of these radioactive substances, and prevention of radiation exposure, are the primary goals of the safety approach for fusion, in order to minimize the potential for harm to personnel, the public, and the environment. The safety functions that are implemented in the design to achieve these goals are dependent on the performance of a range of materials. Degradation of the properties of materials can lead to challenges to key safety functions such as confinement. In this paper the principal types of material that have some role in safety are recalled. These either represent a potential source of hazard or contribute to the amelioration of hazards; in each case the related issues are reviewed. The resolution of these issues lead, in some instances, to requirements on materials specifications or to limits on their performance.

  18. Improvements in and relating to apparatus for moving along or through a material

    International Nuclear Information System (INIS)

    Butterfield, R.

    1975-01-01

    The apparatus described, which has many uses, including operation as part of a remote control device in a nuclear environment, comprises two parts the first of which has an electrically conducting outer surface for engagement with the material and the second part also having an electrically conducting outer surface, electrically insulated from the first part, for engagement with the material. The two conducting outer surfaces are connected to a source of potential difference, and thrust means are provided for exerting a force between the two parts to move them closer together or further apart as required. The first part may be divided into a number of electrically insulated sections. The apparatus may include structures in the first and second parts to prevent liquid that has collected in the first part during operation from entering the second part, or vice versa. The method of operation relies on the fact that the ease with which an electrically conducting body not carrying an electric current can pass along or through material is increased by making the body negative or reduced by making the body positive. (U.K.)

  19. Self-esteem and subjective well-being revisited: The roles of personal, relational, and collective self-esteem

    OpenAIRE

    Du, Hongfei; King, Ronnel B.; Chi, Peilian

    2017-01-01

    Previous studies have shown that self-esteem is an important predictor of subjective well-being. However, the majority of research has focused on self-esteem at the individual and the collective level, but has mostly ignored self-esteem at the relational level. According to social identity theory, individuals can maintain and enhance self-esteem through personal traits (personal self-esteem, PSE), relationships with significant others (relational self-esteem, RSE), and relationships with larg...

  20. Government Collection of Private Information: Background and Issues Related to the USA PATRIOT Act Reauthorization

    Science.gov (United States)

    2010-03-02

    sparse use. The approval process is less familiar, multi-layered, sometimes cumbersome, and time consuming.131 Moreover, voluntary compliance, NSLs...nondisclosure requirement.153 Petitions, which survive a screening process designed to weed out frivolous challenges, may be granted only if the judge concludes...forms of material support are unconstitutionally vague.183 The Supreme Court has agreed to hear arguments which assert that they are incompatible with

  1. Neutron activation analysis of reference materials by the k sub 0 standardization and relative methods

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, M C; Martinho, E [LNETI/ICEN, Sacavem (Portugal)

    1989-04-15

    Instrumental neutron activation analysis with the k{sub o}-standardization method was applied to eight geological, environmental and biological reference materials, including leaves, blood, fish, sediments, soils and limestone. To a first approximation, the results were normally distributed around the certified values with a standard deviation of 10%. Results obtained by using the relative method based on well characterized multi-element standards for IAEA CRM Soil-7 are reported.

  2. Metallorganic precursors route for high Tc superconducting materials and related phases

    International Nuclear Information System (INIS)

    Beltran-porter, D.; Gonzalez, A.; Sanchis, M.J.; Beltran-porter, A.; Ibanez, R.; Sapina, F.

    1991-01-01

    The adequacy of the precursors approach for high Tc superconducting materials is validated by means of three examples of a new synthesis of mixed oxides which are directly related to the high Tc superconductors. The synthesis temperature is lowered significantly, and the need for extending the classic 'building block' approach is shown. The hypothesis that topochemical reactions from molecular to extended solids are posssible is proven. 28 refs

  3. Materials

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2009-02-01

    Full Text Available . It is generally included as part of a structurally insulated panel (SIP) where the foam is sandwiched between external skins of steel, wood or cement. Cement composites Cement bonded composites are an important class of building materials. These products... for their stone buildings, including the Egyptians, Aztecs and Inca’s. As stone is a very dense material it requires intensive heating to become warm. Rocks were generally stacked dry but mud, and later cement, can be used as a mortar to hold the rocks...

  4. Readability of Orthopaedic Oncology-related Patient Education Materials Available on the Internet.

    Science.gov (United States)

    Shah, Akash K; Yi, Paul H; Stein, Andrew

    2015-12-01

    A person's health literacy is one of the most important indicators of a patient's health status. According to national recommendations, patient education materials should be written at no higher than the sixth- to eighth-grade reading level. The purpose of our study was to assess the readability of online patient education materials related to orthopaedic oncology on the websites of the American Academy of Orthopaedic Surgeons (AAOS), American Cancer Society (ACS), Bone and Cancer Foundation (BCF), and National Cancer Institute (NCI). We searched the online patient education libraries of the AAOS, ACS, BCF, and NCI for all articles related to orthopaedic oncology. The Flesch-Kincaid (FK) readability score was calculated for each article and compared between sources. A total of 227 articles were identified with an overall mean FK grade level of 9.8. Stratified by source, the mean FK grade levels were 10.1, 9.6, 11.1, and 9.5 for the AAOS, ACS, BCF, and NCI, respectively (P education materials related to orthopaedic oncology appear to be written at a level above the comprehension ability of the average patient. Copyright 2015 by the American Academy of Orthopaedic Surgeons.

  5. Type material of Platyhelminthes housed in the Helminthological Collection of the Oswaldo Cruz Institute/ FIOCRUZ (CHIOC, Rio de Janeiro, Brazil, from 1979 to 2016 (Rhabditophora, Trematoda and Cestoda

    Directory of Open Access Journals (Sweden)

    Daniela A. Lopes

    2017-03-01

    Full Text Available The second part of the catalogue of type material deposited in the Helminthological Collection of the Oswaldo Cruz Institute/ FIOCRUZ (CHIOC, between 1979 and 2016, is presented, to complement the first list of all types that was published in 1979. This part includes Platyhelminthes other than monogenoids, which were covered in the first part published in September 2016. The present catalogue comprises type material for 104 species, distributed across three classes, 40 families and 75 genera. Species names are listed systematically, followed by type host, infection site, type locality and specimens with their collection numbers and references. The classification and the nomenclature of the species have been updated.

  6. Using relational databases to collect and store discrete-event simulation results

    DEFF Research Database (Denmark)

    Poderys, Justas; Soler, José

    2016-01-01

    , export the results to a data carrier file and then process the results stored in a file using the data processing software. In this work, we propose to save the simulation results directly from a simulation tool to a computer database. We implemented a link between the discrete-even simulation tool...... and the database and performed performance evaluation of 3 different open-source database systems. We show, that with a right choice of a database system, simulation results can be collected and exported up to 2.67 times faster, and use 1.78 times less disk space when compared to using simulation software built...

  7. Regulatory focussing of the relevant aspects related to the transport of radioactive materials in Argentina

    International Nuclear Information System (INIS)

    Lopez Vietri, J.R.; Novo, R.G.; Bianchi, A.J.

    1998-01-01

    Full text: This paper points out a summary of the relevant aspects related to the transport of radioactive material in Argentina treated only from a regulatory focussing, it is to say from the point of view of its competent authority of application the Nuclear Regulatory Authority (in Spanish, the Autoridad Regulatoria Nuclear, ARN). Firstly, it is introduced the legal and regulatory framework applicable to the transport of radioactive material and the corresponding authorities involved (ARN, Secretary of Transport, and the Argentine Air Force, Naval Prefecture and Navy). Then, it is presented a schedule of the main characteristics of the shipments of radioactive material used in both the nuclear cycle and in medicine, industry and research, and an average of the shipments annually transported in Argentina. Further on the paper briefly analyses the ARN sources and the way in which it performs the compliance assurance with the in-force transport regulations in the country. Particularly, it is explained certain main tools used by the compliance system, as for example, transport notice, data base, licensing of certain design packages, shipments and materials, inspection and audits, and fees and sanctions regimes. On the other hand, it is mentioned the Argentine experience in the development, licensing, manufacture and use of domestic designs of Type B(U) packages and special form radioactive material (cobalt 60 and iridium 192 sealed sources). Moreover, it is concisely described test facilities available in the country necessary to perform the mentioned designs. Finally, the paper shortly describes the ARN main transport activities exclusively concerning the relationship with other national organisations (Federal Police, Gendarmerie, Naval Prefecture and Argentine Institute of Material Rationalisation, in Spanish Instituto Argentino de Racionalizacion de Materiales - IRAM) and with regional and inter regional organisations (South American Common Market, in Spanish

  8. Common cause failure data collection and analysis for safety-related components of TRIGA SSR-14MW Pitesti, Romania

    International Nuclear Information System (INIS)

    Radu, G.; Mladin, D.

    2003-01-01

    This paper presents a study performed on the set of common cause failures (CCF) of safety-related components of the research reactor TRIGA SSR-14 MW Pitesti. The data collected cover a period of 20 years, from 1979 to 2000. The sources of data are Shift Supervisor Reports, Work Authorizations, and Reactor Log Books. Events collected are analyzed by failure mode and degrees of failure. Qualitative analysis of root causes, coupling factors and corrective actions and quantitative analysis of CCF events are studied. The objective of this work is to develop qualitative insights in the nature of the reported events and to build a site-specific common cause events database. (author)

  9. A catalog of bird specimens associated with Prince Maximilian of Wied-Neuwied and potential type material in the natural history collection in Wiesbaden

    Directory of Open Access Journals (Sweden)

    Dorothee Hoffmann

    2013-11-01

    Full Text Available Bird specimens collected by 19th century explorer and ornithologist Prince Maximilian of Wied-Neuwied form one of the foundation collections of the American Museum of Natural History in New York. However, parts of his collection remained in Germany and came to the Museum Wiesbaden. Since Wied described numerous new species without designating types, some of these specimens might be type material. Here we present a catalog of the 30 Wiesbaden specimens associated with him and discuss their potential type status. We conclude that 17 individuals in 11 species are potential type specimens that should be considered in future taxonomic work.

  10. Relation between bandgap and resistance drift in amorphous phase change materials.

    Science.gov (United States)

    Rütten, Martin; Kaes, Matthias; Albert, Andreas; Wuttig, Matthias; Salinga, Martin

    2015-12-01

    Memory based on phase change materials is currently the most promising candidate for bridging the gap in access time between memory and storage in traditional memory hierarchy. However, multilevel storage is still hindered by the so-called resistance drift commonly related to structural relaxation of the amorphous phase. Here, we present the temporal evolution of infrared spectra measured on amorphous thin films of the three phase change materials Ag4In3Sb67Te26, GeTe and the most popular Ge2Sb2Te5. A widening of the bandgap upon annealing accompanied by a decrease of the optical dielectric constant ε∞ is observed for all three materials. Quantitative comparison with experimental data for the apparent activation energy of conduction reveals that the temporal evolution of bandgap and activation energy can be decoupled. The case of Ag4In3Sb67Te26, where the increase of activation energy is significantly smaller than the bandgap widening, demonstrates the possibility to identify new phase change materials with reduced resistance drift.

  11. Facilitating Effects of Nanoparticles/Materials on Sensitive Immune-Related Lung Disorders

    Directory of Open Access Journals (Sweden)

    Ken-ichiro Inoue

    2011-01-01

    Full Text Available Although the adverse health effects of nanoparticles/materials have been proposed and are being clarified, their facilitating effects on preexisting pathological conditions have not been fully examined. In this paper, we provide insights into the immunotoxicity of nanoparticles/materials as an aggravating factor in hypersusceptible subjects, especially those with immune-related respiratory disorders using our in vivo experimental model. We first exhibit the effects of nanoparticles/materials on lung inflammation induced by bacterial endotoxin (lipopolysaccharide: LPS in vivo as a disease model in innate immunity, and demonstrated that nanoparticles instilled through both an intratracheal tube and an inhalation system can exacerbate the lung inflammation. Secondly, we introduce the effects of nanoparticles/materials on allergic asthma in vivo as a disease model in adaptive immunity, and showed that repetitive pulmonary exposure to nanoparticles has aggravating effects on allergic airway inflammation, including adjuvant effects on Th2-milieu. Taken together, nanoparticle exposure may synergistically facilitate pathological inflammatory conditions in the lung via both innate and adaptive immunological abnormalities.

  12. Facilitating Effects of Nanoparticles/Materials on Sensitive Immune-Related Lung Disorders

    International Nuclear Information System (INIS)

    Inoue, K.I.; Takano, H.

    2011-01-01

    Although the adverse health effects of nanoparticles/materials have been proposed and are being clarified, their facilitating effects on preexisting pathological conditions have not been fully examined. In this paper, we provide insights into the immunotoxicity of nanoparticles/materials as an aggravating factor in hyper susceptible subjects, especially those with immune-related respiratory disorders using our in vivo experimental model. We first exhibit the effects of nanoparticles/materials on lung inflammation induced by bacterial endotoxin (lipopolysaccharide: LPS) in vivo as a disease model in innate immunity, and demonstrated that nanoparticles instilled through both an intratracheal tube and an inhalation system can exacerbate the lung inflammation. Secondly, we introduce the effects of nanoparticles/materials on allergic asthma in vivo as a disease model in adaptive immunity, and showed that repetitive pulmonary exposure to nanoparticles has aggravating effects on allergic airway inflammation, including adjuvant effects on Th2-milieu. Taken together, nanoparticle exposure may synergistically facilitate pathological inflammatory conditions in the lung via both innate and adaptive immunological abnormalities.

  13. Lessons learned from a rigorous peer-review process for building the Climate Literacy and Energy Awareness (CLEAN) collection of high-quality digital teaching materials

    Science.gov (United States)

    Gold, A. U.; Ledley, T. S.; McCaffrey, M. S.; Buhr, S. M.; Manduca, C. A.; Niepold, F.; Fox, S.; Howell, C. D.; Lynds, S. E.

    2010-12-01

    The topic of climate change permeates all aspects of our society: the news, household debates, scientific conferences, etc. To provide students with accurate information about climate science and energy awareness, educators require scientifically and pedagogically robust teaching materials. To address this need, the NSF-funded Climate Literacy & Energy Awareness Network (CLEAN) Pathway has assembled a new peer-reviewed digital collection as part of the National Science Digital Library (NSDL) featuring teaching materials centered on climate and energy science for grades 6 through 16. The scope and framework of the collection is defined by the Essential Principles of Climate Science (CCSP 2009) and a set of energy awareness principles developed in the project. The collection provides trustworthy teaching materials on these socially relevant topics and prepares students to become responsible decision-makers. While a peer-review process is desirable for curriculum developer as well as collection builder to ensure quality, its implementation is non-trivial. We have designed a rigorous and transparent peer-review process for the CLEAN collection, and our experiences provide general guidelines that can be used to judge the quality of digital teaching materials across disciplines. Our multi-stage review process ensures that only resources with teaching goals relevant to developing climate literacy and energy awareness are considered. Each relevant resource is reviewed by two individuals to assess the i) scientific accuracy, ii) pedagogic effectiveness, and iii) usability/technical quality. A science review by an expert ensures the scientific quality and accuracy. Resources that pass all review steps are forwarded to a review panel of educators and scientists who make a final decision regarding inclusion of the materials in the CLEAN collection. Results from the first panel review show that about 20% (~100) of the resources that were initially considered for inclusion

  14. Special relativity and quantum theory: a collection of papers on the Poincari Group

    International Nuclear Information System (INIS)

    Noz, M.E.; Kim, Y.S.

    1988-01-01

    When the present form of quantum mechanics was formulated in 1927, the most pressing problem was how to make it consistent with special relativity. This still remains a most important and urgent theoretical problem in physics. The underlying language for both disciplines is group theory, and E.P. Wigner's 1939 paper on the Poincari group laid the foundation for unifying the concepts and algorithms of quantum mechanics and special relativity. This volume comprises forty-five papers, including those by P.A.M. Dirac, R.P. Feynman, S. Weinberg, E.P. Wigner and H. Yukawa, covering representations of the Poincari group, time-energy uncertainty relation, covariant pictures of quantum bound states, Lorentz-Dirac deformation in high-enery physics, gauge degrees of freedom for massless particles, group contractions applied to the large-momentum/zero-mass limit, localization problems, and physical applications of the Lorentz group

  15. Development of a relational database for nuclear material (NM) accounting in RC and I Group

    International Nuclear Information System (INIS)

    Yadav, M.B.; Ramakumar, K.L.; Venugopal, V.

    2011-01-01

    A relational database for the nuclear material accounting in RC and I Group has been developed with MYSQL for Back-End and JAVA for Front-End development. Back-End has been developed to avoid any data redundancy, to provide random access of the data and to retrieve the required information from database easily. JAVA Applet and Java Swing components of JAVA programming have been used in the Front-End development. Front-End has been developed to provide data security, data integrity, to generate inventory status report at the end of accounting period, and also to have a quick look of some required information on computer screen. The database has been tested for the data of three quarters of the year 2009. It has been implemented from 1st January, 2010 for the accounting of nuclear material in RC and I Group. (author)

  16. Development of a relational database for nuclear material (NM) accounting in RC and I Group

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, M B; Ramakumar, K L; Venugopal, V [Radioanalytical Chemistry Division, Radiochemistry and Isotope Group, Bhabha Atomic Research Centre, Mumbai (India)

    2011-07-01

    A relational database for the nuclear material accounting in RC and I Group has been developed with MYSQL for Back-End and JAVA for Front-End development. Back-End has been developed to avoid any data redundancy, to provide random access of the data and to retrieve the required information from database easily. JAVA Applet and Java Swing components of JAVA programming have been used in the Front-End development. Front-End has been developed to provide data security, data integrity, to generate inventory status report at the end of accounting period, and also to have a quick look of some required information on computer screen. The database has been tested for the data of three quarters of the year 2009. It has been implemented from 1st January, 2010 for the accounting of nuclear material in RC and I Group. (author)

  17. Heterotopic relation between media and materiality in children's online memorials and on children's graves

    DEFF Research Database (Denmark)

    Sandvik, Kjetil; Christensen, Dorthe Refslund

    place across media. We show how the death of an infant can lead to mediation, remediation and mediatization strategies which involves both the uses and arrangement of objects on memorial pages and on children’s graves as well as uses of new social technologies, that produce, negotiate and develop social......In this paper we analyze how bereaved parents make use of various media-strategies on online memorial sites and on children’s graves when performing processes of grief and commemoration for their stillborns and infants, and how these processes are not just linked to one particular media but take...... relations with the dead child and the (re)negotiating of parenthood. We understand media as a function of an object reflected in human practices and embedded and structured by the different materialities they are intertwined with. We argue that the use of media and materiality online and on the graves are...

  18. Solitons and polarons in quasi-one dimensional conducting polymers and related materials

    International Nuclear Information System (INIS)

    Campbell, D.K.

    1983-01-01

    In recent years it has become increasingly appreciated that fundamentally nonlinear excitations - solitons - play an essential role in an incredible variety of natural systems. These solitons, which frequently exhibit remarkable stability under interactions and perturbations, often dominate the transport, response, or structural properties of the systems in which they occur. In this article, we present an introduction to the solitons that occur in quasi-one-dimensional conducting polymers (synmetals) and related systems. The relevance of this subject to molecular electronic devices is twofold. First, many of these materials have molecular structures similar to possible prototype molecular switches. Second, to understand in detail how a molecular electronic device could work, it is essential to have a broad perspective on the nature of possible excitations in a variety of natural and synthetic molecular materials. 51 references

  19. 75 FR 69047 - Proposed Information Collection; Comment Request; Questionnaire on Business-Related Visa Processes

    Science.gov (United States)

    2010-11-10

    ... active in the global economy. The facilitation of business travel is a priority of Secretary's and very... Request; Questionnaire on Business-Related Visa Processes AGENCY: International Trade Administration... products, services, capital, and people create a positive business environment for their domestic firms...

  20. Thermophysical Properties of Mars' North Polar Layered Deposits and Related Materials from Mars Odyssey THEMIS

    Science.gov (United States)

    Vasavada, A. R.; Richardson, M. I.; Byrne, S.; Ivanov, A. B.; Christensen, P. R.

    2003-01-01

    The presence of a thick sequence of horizontal layers of ice-rich material at Mars north pole, dissected by troughs and eroding at its margins, is undoubtedly telling us something about the evolution of Mars climate [1,2] we just don t know what yet. The North Polar Layered Deposits (NPLD) most likely formed as astronomically driven climate variations led to the deposition of conformable, areally extensive layers of ice and dust over the polar region. More recently, the balance seems to have fundamentally shifted to net erosion, as evidenced by the many troughs within the NPLD and the steep, arcuate scarps present near its margins, both of which expose layering. We defined a number of Regions of Interest ROI) for THEMIS to target as part of the Mars Odyssey Participating Scientist program. We use these THEMIS data in order to understand the morphology and color/thermal properties of the NPLD and related materials over relevant (i.e., m to km) spatial scales. We have assembled color mosaics of our ROIs in order to map the distribution of ices, the different layered units, dark material, and underlying basement. The color information from THEMIS is crucial for distinguishing these different units which are less distinct on Mars Orbiter Camera images. We wish to understand the nature of the marginal scarps and their relationship to the dark material. Our next, more ambitious goal is to derive the thermophysical properties of the different geologic materials using THEMIS and Mars Global Surveyor Thermal Emission Spectrometer TES) data.

  1. Material factors in relation to development time in liquid-penetrant inspection. Part 3. Testing of model plates

    Directory of Open Access Journals (Sweden)

    Irek P.

    2017-03-01

    Full Text Available The paper is the continuation of the previous ones entitled „Material factors in relation to development time in liquid-penetrant inspection. Part 1. Material factors“ and „Material factors in relation to development time in liquid-penetrant inspection. Part 2. Investigation programme and preliminary tests“ in which material factors influencing essentially the development time in penetrant testing as well as the range of their values have been specified. These factors are: material kind, surface roughness and imperfection width.

  2. Readability assessment of Internet-based patient education materials related to endoscopic sinus surgery.

    Science.gov (United States)

    Cherla, Deepa V; Sanghvi, Saurin; Choudhry, Osamah J; Liu, James K; Eloy, Jean Anderson

    2012-08-01

    Numerous professional societies, clinical practices, and hospitals provide Internet-based patient education materials (PEMs) to the general public, but not all of this information is written at a reading level appropriate for the average patient. The National Institutes of Health and the US Department of Health and Human Services recommend that PEMs be written at or below the sixth-grade level. Our purpose was to assess the readability of endoscopic sinus surgery (ESS)-related PEMs available on the Internet and compare readability levels of PEMs provided by three sources: professional societies, clinical practices, and hospitals. A descriptive and correlational design was used for this study. The readability of 31 ESS-related PEMs was assessed with four different readability indices: Flesch-Kincaid Grade Level (FKGL), Flesch Reading Ease Score (FRES), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (Gunning FOG). Averages were evaluated against national recommendations and between each source using analysis of variance and t tests. The majority of PEMs (96.8%) were written above the recommended sixth-grade reading level, based on FKGL (P Internet-based PEMs related to ESS, regardless of source type, were written well above the recommended sixth-grade level. Materials from the hospitals/university-affiliated websites had lower readability scores, but were still above recommended levels. Web-based PEMs pertaining to ESS should be written with the average patient in mind. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

  3. On the determination of representative stress–strain relation of metallic materials using instrumented indentation

    International Nuclear Information System (INIS)

    Fu, Kunkun; Chang, Li; Zheng, Bailin; Tang, Youhong; Wang, Hongjian

    2015-01-01

    Highlights: • A method to convert indentation load–depth curve into representative stress–strain curve is presented. • Representative stress–strain curves of six metals are obtained using finite element analysis. • Different representative strain definitions are compared using finite element method. • Representative stress–strain curve of molybdenum films is obtained by nanoindentation tests. - Abstract: In this study, attempts have been made to estimate the representative stress–strain relation of metallic materials from indentation tests using an iterative method. Finite element analysis was performed to validate the method. The results showed that representative stress–strain relations of metallic materials using the present method were in a good agreement with those from tensile tests. Further, this method was extended to predict representative stress–strain relation of ultra-thin molybdenum films with a thickness of 485 nm using nanoindentation. Yielding strength and strain hardening exponent of the films were therefore obtained, which showed a good agreement with the published data

  4. Teeth and bones: applications of surface science to dental materials and related biomaterials

    Science.gov (United States)

    Jones, F. H.

    2001-05-01

    Recent years have seen a considerable upsurge in publications concerning the surface structure and chemistry of materials with biological or biomedical applications. Within the body, gas-solid interactions become relatively less significant and solid-liquid or solid-solid interfaces dominate, providing new challenges for the surface scientist. The current paper aims to provide a timely review of the use of surface analysis and modification techniques within the biomaterials field. A broad overview of applications in a number of related areas is given with particular attention focusing on those materials commonly encountered in dentistry and oral or maxillofacial implantology. Several specific issues of current interest are discussed. The interaction between synthetic and natural solids, both in the oral environment and elsewhere in the body is important in terms of adhesion, related stresses and strains and ultimately the longevity of a dental restoration, biomedical implant, or indeed the surrounding tissue. Exposure to body fluids, of course, can also affect stability, leading to the degradation or corrosion of materials within the body. Whilst this could potentially be harmful, e.g., if cytotoxic elements are released, it may alternatively provide a route to the preferential release of beneficial substances. Furthermore, in some cases, the controlled disintegration of a biomaterial is desirable, allowing the removal of an implant, e.g., without the need for further surgery. The presence of cells in the immediate bioenvironment additionally complicates the situation. A considerable amount of current research activity is targeted at the development of coatings or surface treatments to encourage tissue growth. If this is to be achieved by stimulating enhanced cell productivity, determination of the relationship between cell function and surface composition is essential.

  5. Annotated bibliography of methods for determining sulfur and forms of sulfur in coal and coal-related materials

    Energy Technology Data Exchange (ETDEWEB)

    Chriswell, C.D.; Norton, G.A.; Akhtar, S.S.; Straszheim, W.E.; Markuszewski, R.

    1993-01-01

    Over 400 published papers, presentations at scientific meetings, and reports relating to the determination of sulfur and sulfur forms in coal-related materials have been accumulated, classified, and an evaluation made of their content.

  6. Role Breadth Self-Efficacy and Foci of Proactive Behavior: Moderating Role of Collective, Relational, and Individual Self-Concept.

    Science.gov (United States)

    Hwang, Pin-Chyuan; Han, Ming-Chuan; Chiu, Su-Fen

    2015-01-01

    This study aims to identify the interactive effect of role breadth self-efficacy (RBSE) and the three levels of self-concept (collective, relational, and individual) in predicting of different foci of proactive behaviors. Results from 259 matched responses from an airline company in Taiwan showed that RBSE had a positive effect on (1) pro-organizational proactive behavior among those with higher collective self-concept, (2) pro-supervisor proactive behavior among those with higher relational self-concept, and (3) pro-self proactive behavior among those with higher individual self-concept. Our findings provide insights into the moderating role of different levels of self-concept on RBSE-proactive behavior process in terms of specific targets or beneficiaries. Further implications for organizational research and practice are discussed.

  7. Self-esteem and subjective well-being revisited: The roles of personal, relational, and collective self-esteem.

    Directory of Open Access Journals (Sweden)

    Hongfei Du

    Full Text Available Previous studies have shown that self-esteem is an important predictor of subjective well-being. However, the majority of research has focused on self-esteem at the individual and the collective level, but has mostly ignored self-esteem at the relational level. According to social identity theory, individuals can maintain and enhance self-esteem through personal traits (personal self-esteem, PSE, relationships with significant others (relational self-esteem, RSE, and relationships with larger groups (collective self-esteem, CSE. The current research investigated whether RSE and CSE can predict subjective well-being beyond PSE among Chinese college students. With four cross-sectional studies and one longitudinal study (N = 847, we found that, when controlling for PSE, RSE was associated with greater life satisfaction, positive affect, meaning in life, happiness, and subjective vitality (Studies 1-5, but CSE was not (Studies 2-5. Implications are discussed.

  8. Self-esteem and subjective well-being revisited: The roles of personal, relational, and collective self-esteem.

    Science.gov (United States)

    Du, Hongfei; King, Ronnel B; Chi, Peilian

    2017-01-01

    Previous studies have shown that self-esteem is an important predictor of subjective well-being. However, the majority of research has focused on self-esteem at the individual and the collective level, but has mostly ignored self-esteem at the relational level. According to social identity theory, individuals can maintain and enhance self-esteem through personal traits (personal self-esteem, PSE), relationships with significant others (relational self-esteem, RSE), and relationships with larger groups (collective self-esteem, CSE). The current research investigated whether RSE and CSE can predict subjective well-being beyond PSE among Chinese college students. With four cross-sectional studies and one longitudinal study (N = 847), we found that, when controlling for PSE, RSE was associated with greater life satisfaction, positive affect, meaning in life, happiness, and subjective vitality (Studies 1-5), but CSE was not (Studies 2-5). Implications are discussed.

  9. Self-esteem and subjective well-being revisited: The roles of personal, relational, and collective self-esteem

    Science.gov (United States)

    Du, Hongfei; King, Ronnel B.; Chi, Peilian

    2017-01-01

    Previous studies have shown that self-esteem is an important predictor of subjective well-being. However, the majority of research has focused on self-esteem at the individual and the collective level, but has mostly ignored self-esteem at the relational level. According to social identity theory, individuals can maintain and enhance self-esteem through personal traits (personal self-esteem, PSE), relationships with significant others (relational self-esteem, RSE), and relationships with larger groups (collective self-esteem, CSE). The current research investigated whether RSE and CSE can predict subjective well-being beyond PSE among Chinese college students. With four cross-sectional studies and one longitudinal study (N = 847), we found that, when controlling for PSE, RSE was associated with greater life satisfaction, positive affect, meaning in life, happiness, and subjective vitality (Studies 1–5), but CSE was not (Studies 2–5). Implications are discussed. PMID:28841716

  10. A review of modern instrumental methods of elemental analysis of petroleum related material. Part 2

    International Nuclear Information System (INIS)

    Nadkarni, R.A.

    1991-01-01

    In this paper a review is presented of the state of the art in elemental analysis of petroleum-related materials (crude oil, gasoline, additives, and lubricants) using modern instrumental analysis techniques. The major instrumental techniques used for elemental analysis of petroleum products include atomic absorption spectrometry (both with flame and with graphite furnace atomizer), inductively coupled plasma atomic emission spectrometry, ion chromatography, microelemental methods, neutron activation, spark source mass spectrometry, and x-ray fluorescence. Each of these techniques is compared for its advantages, disadvantages, and typical applications in the petroleum field

  11. Rapid photometric determination of phosphorus in iron ores and related materials as phosphomolybdenum-blue.

    Science.gov (United States)

    Bhargava, O P; Gmitro, M

    1984-04-01

    A rapid, simple and accurate method for determining phosphorus photometrically in iron ores and related materials, obviating the use of perchloric acid, is described. The sample is fused with sodium peroxide in a zirconium crucible and the melt dissolved in hydrochloric acid. The molybdenum-blue complex is developed by the addition of ammonium molybdate and hydrazine sulphate and the absorbance is measured at 725 nm. The range of the method is from 0.005 to 1.0% P. A batch of 6 samples can be analysed in about 2 hr.

  12. Collection and presentation of animal data relating to internally distributed radionuclides

    International Nuclear Information System (INIS)

    Lathrop, K.A.

    1981-01-01

    Data obtained from laboratory animals on the distribution of an internally administered radionuclide may be put to use by various people in ways quite different from the one for which the original observations were made. Consideration for these other scientists, sometimes in unrelated fields, can be shown by attention to a few details in the method of data collection and reporting that may improve the author's credibility, the reader's comprehension, and the value of the data. Briefly stated, two rules should be followed: Account for 100% of the administered radioactivity; and report data as fraction of administered activity per organ. The first rule serves as an internal check on the proper functioning of counting equipment, and may disclose excretion, contamination of counting tubes, or failure to inject the desired amount of activity. The second rule allows anyone to make use of the raw data. Presentation of the data only in complicated, manipulated form either totally prevents reconstruction of the raw data, or demands tedious, uncertain conversions. Examples of such manipulated data include percent dose per gram per 1% body weight and percent kilogram dose per gram. At the other extreme in reporting data for radioactivity, and to be equally avoided, are completely unprocessed values, such as counts per minute, with no reference made to the number of counts injected or to the time lapse between counts. Adherence to these two principles will permit the reader to follow through on any permutations of the data that the author may make, and to apply the data in unrelated situations

  13. Collective and Personal Representations of the Crimean Tatars in the Ukrainian Media Discourse: Ideological Implications and Power Relations

    OpenAIRE

    Bezverkha, Anastasia

    2015-01-01

    This study analyzes the Ukrainian national and Crimean media’s collective and individual representations of the Crimean Tatar people during 2010–2012. It demonstrates that this media’s discourse was a sensitive milieu that reflected the unequal power relations between Crimea’s ethnic groups — the Crimean Tatar minority and the Slavic majority — and informed the way individuals constructed their identities and social roles within Crimean society. The discursive mechanisms of the media’s repres...

  14. Relating desorption of polycyclic aromatic hydrocarbons from harbour sludges to type of organic material

    Science.gov (United States)

    Heister, K.; Pols, S.; Loch, J. P. G.; Bosma, T.

    2009-04-01

    For decades, polycyclic aromatic hydrocarbons (PAH) cause great concern as environmental pollutants. Especially river and marine harbour sediments are frequently polluted with PAH derived from surface runoff, fuel and oil spills due to shipping and industrial activities, industrial waste and atmospheric deposition. Harbour sediments contain large amounts of organic carbon and clay minerals and are therefore not easy to remediate and have to be stored in sludge depositories after dredging to maintain sufficient water depth for shipping. The organic contaminants will be adsorbed to particles, leached in association with dissolved organic material or microbially degraded. However, compounds of high molecular weight are very persistent, particularly under anaerobic conditions, thus giving rise to the potential to become desorbed again. PAH adsorb mainly to organic material. It has been shown that components of the organic material with a low polarity and a high hydrophobicity like aliphatic and aromatic components exhibit a high sorption capacity for hydrophobic organic contaminants like PAH. Accordingly, not only the amount but also the type of organic material needs to be determined in order to be able to predict contaminant behaviour. In this study, desorption behaviour of the 16 EPA-PAH in two different harbour sludges from the port of Rotterdam, the Netherlands, has been investigated. The Beerkanaal (BK) site is located relatively close to the North Sea and represents a brackish environment; the Beneden Merwede River (BMR) site originates from a fresh water environment and is close to industrial sites. The samples were placed in dialysis membranes and brought into contact with water for a period of 130 days. At several time intervals, water samples were retrieved for analysis of pH, dissolved organic carbon (DOC) content, electrical conductivity and PAH concentrations. The experiment was conducted at 4 and at 20°C. Although the samples were initially treated with

  15. Nutrient content in macrophyta collected from southern Baltic Sea beaches in relation to eutrophication and biogas production

    Energy Technology Data Exchange (ETDEWEB)

    Bucholc, K.; Szymczak-Żyła, M.; Lubecki, L. [Marine Pollution Laboratory, Institute of Oceanology, Polish Academy of Sciences, ul. Powstańców Warszawy 55, 81-712 Sopot (Poland); Zamojska, A. [University of Gdańsk, Department of Econometrics, ul. Armii Krajowej 101, 81-824 Sopot (Poland); Hapter, P. [Marine Pollution Laboratory, Institute of Oceanology, Polish Academy of Sciences, ul. Powstańców Warszawy 55, 81-712 Sopot (Poland); Tjernström, E. [Environmental Department, Trelleborg Municipality, Algatan 13, 231 83 Trelleborg (Sweden); Kowalewska, G. [Marine Pollution Laboratory, Institute of Oceanology, Polish Academy of Sciences, ul. Powstańców Warszawy 55, 81-712 Sopot (Poland)

    2014-03-01

    One of the signs of eutrophication is the excessive growth of opportunistic macroalgae, a worldwide phenomenon also observed in the Baltic Sea. Mats of macroalgae may drift long distances and accumulate at the seashore, considerably decreasing the recreational value of beaches. The matter accumulating at the shore is treated usually as waste. However, it could be used, for example, as a resource for biogas production. The aim of this work was to verify the hypothesis that collecting of macrophyta accumulating on the beach and potential usage of this material for biogas production will decrease nutrient reserves in the sea to counteract eutrophication and the increase in greenhouse effects. Samples of macrophyta were collected in 2011 and 2012 and analysed for their C, N, and P contents, and degree of degradation (% Chl-a in the sum of chloropigments-a); the results were analysed statistically. The nutrient content was studied in macrophyta accumulating on the beach (Sopot, Gulf of Gdańsk, Poland) and for comparison, macrophyta collected from their habitats in less nutrient polluted area (off the Skåre coast, Trelleborg, Sweden). The nutrient content (N, P) in macrophyta depends primarily on their morphology and only secondarily on environmental nutrient pollution. Collecting the macrophyta biomass accumulating on beaches will not significantly change the eutrophication of the Baltic as a whole; any improvements in this respect are likely to be on a local scale only. Collecting macrophyta removes more nitrogen than phosphorous, so this would decrease the N/P ratio in seawater. This macrophyta biomass is a substantial reserve of renewable energy, which could be utilized with the appropriate technology for biomass collection/preservation and biofuel production as an additive to other carbon-rich biomasses. And the biofuel production should be evaluated not only from the standpoint of economic efficiency but also from the environmental point of view. - Highlights:

  16. Do User (Browse and Click) Sessions Relate to Their Questions in a Domain-specific Collection?

    DEFF Research Database (Denmark)

    Steinhauer, Jeremy; Delcambre, Lois M.L.; Lykke, Marianne

    2013-01-01

    relate to the question that they are answering. The contribution of this paper is the evalua-tion of the suitability of common machine learning metrics (measuring the dis-tance between two sessions) to distinguish sessions of users searching for the answer to same or different questions. We found...... that sessions for people an-swering the same question are significantly different that those answering dif-ferent questions, but results are dependent on the distance metric used. We ex-plain why some distance metrics performed better than others....

  17. Construction cost impacts related to manpower, material, and equipment factors in contractor firms perspective

    Science.gov (United States)

    Husin, Saiful; Abdullah, Riza, Medyan; Afifuddin, Mochammad

    2017-11-01

    Risk can be defined as consequences which possible happened inscrutably. Although an activity has planned as good as possible, but it keep contains uncertainty. Implementation of construction project was encountering various risk impacts from a number of risk factors. This study was intended to analyze the impacts of construction cost to for contractor firms as construction project executor related to the factors of manpower, material and equipment. The study was using data obtained from questionnaires distributed to 15 large qualification contractor firms. The period of study classified into conflict period (2000-2004), post tsunami disaster rehabilitation and reconstruction period (2005-2009), and post rehabilitation and reconstruction period (2010-present). The statistical analysis of severity index and variance used to analyze the data. The three risk factors reviewed generally affected the cost in a medium impact. The high impact occurred in minor variables, which are `increase in material prices', `theft of materials', and `the fuel scarcity'. In overall, the three risk factors and the observed period contributed significant impact on construction costs.

  18. Radon survey related to construction materials and soils in Zacatecas, Mexico using LR-115

    International Nuclear Information System (INIS)

    Mireles, F.; Garcia, M.L.; Quirino, L.L.; Davila, J.I.; Pinedo, J.L.; Rios, C.; Montero, M.E.; Colmenero, L.; Villalba, L.

    2007-01-01

    Indoor radon gas ( 222 Rn), present in the air inside buildings, is one of the most important sources of radiation exposure to the population. This gas originates in the 238 U radioactive decay chain, which is contained in rock and solid soil particles. Radon accumulation in confined spaces, inside buildings, depends on several factors such as the type of soils, type of constructions, building materials, and ventilation. The aim of this work is to present indoor and outdoor radon concentrations for 202 dwellings and indoor concentrations for 148 public clinics; and the radon concentrations relate to the type of predominant soils, the construction years; and building materials used in the ceilings, walls and floors, for cities and towns of the 57 municipalities in the State of Zacatecas, Mexico. The 222 Rn concentrations were measured with a passive-type radon monitor, with LR-115 as detector material; and the radon survey was made during four stages of three months each throughout Zacatecas from 2001 to 2002. The indoor and outdoor radon concentration averages in dwellings were 55.6±4.9Bqm -3 and 46.5±5.3Bqm -3 , respectively. The indoor radon concentration average in public clinics was 57.8±5.4Bqm -3 . These values were lower than the US EPA action limit of 148Bqm -3

  19. Quantum chemical and spectroscopic analysis of calcium hydroxyapatite and related materials

    International Nuclear Information System (INIS)

    Khavryuchenko, V.D.; Khavryuchenko, O.V.; Lisnyak, V.V.

    2007-01-01

    Amorphous calcium hydroxyapatite was examined by vibrational spectroscopy (Raman and infra-red (IR)) and quantum chemical simulation techniques. The structures and vibrational (IR, Raman and inelastic neutron scattering) spectra of PO 4 3- ion, Ca 3 (PO 4 ) 2 , [Ca 3 (PO 4 ) 2 ] 3 , Ca 5 (PO 4 ) 3 OH, CaHPO 4 , [CaHPO 4 ] 2 , Ca 3 (PO 4 ) 2 .H 2 O, Ca 3 (PO 4 ) 2 .2H 2 O and Ca 3 (PO 4 ) 2 .3H 2 O clusters were quantum chemically simulated at ab initio and semiempirical levels of approximation. A complete coordinate analysis of the vibrational spectra was performed. The comparison of the theoretically simulated spectra with the experimental ones allows to identify correctly the phase composition of the amorphous calcium hydroxyapatite and related materials. The shape of the bands in the IR spectra of the hydroxoapatite can be used in order to characterize the structural properties of the material, e.g., the PO 4 3- ion status, the degree of hydrolysis of the material and the presence of hydrolysis products. - Graphical abstract: The structure of the quantum chemically optimized Ca 5 (PO 4 ) 3 (OH) cluster, which was used for vibrations spectra simulation

  20. Foreign Body Giant Cell-Related Encapsulation of a Synthetic Material Three Years After Augmentation.

    Science.gov (United States)

    Lorenz, Jonas; Barbeck, Mike; Sader, Robert A; Kirkpatrick, Charles J; Russe, Philippe; Choukroun, Joseph; Ghanaati, Shahram

    2016-06-01

    Bone substitute materials of different origin and chemical compositions are frequently used in augmentation procedures to enlarge the local bone amount. However, relatively little data exist on the long-term tissue reactions. The presented case reports for the first time histological and histomorphometrical analyses of a nanocrystaline hydroxyapatite-based bone substitute material implanted in the human sinus cavity after an integration period of 3 years. The extracted biopsy was analyzed histologically and histomorphometrically with focus on the tissue reactions, vascularization, new bone formation, and the induction of a foreign body reaction. A comparably high rate of connective tissue (48.25%) surrounding the remaining bone substitute granules (42.13%) was observed. Accordingly, the amount of bone tissue (9.62%) built the smallest fraction within the biopsy. Further, tartrate-resistant acid phosphatase-positive and -negative multinucleated giant cells (4.35 and 3.93 cells/mm(2), respectively) were detected on the material-tissue interfaces. The implantation bed showed a mild vascularization of 10.03 vessels/mm(2) and 0.78%. The present case report shows that after 3 years, a comparable small amount of bone tissue was observable. Thus, the foreign body response to the bone substitute seems to be folded without further degradation or regeneration.

  1. Viscoelastic Materials Study for the Mitigation of Blast-Related Brain Injury

    Science.gov (United States)

    Bartyczak, Susan; Mock, Willis, Jr.

    2011-06-01

    Recent preliminary research into the causes of blast-related brain injury indicates that exposure to blast pressures, such as from IED detonation or multiple firings of a weapon, causes damage to brain tissue resulting in Traumatic Brain Injury (TBI) and Post Traumatic Stress Disorder (PTSD). Current combat helmets are not sufficient to protect the warfighter from this danger and the effects are debilitating, costly, and long-lasting. Commercially available viscoelastic materials, designed to dampen vibration caused by shock waves, might be useful as helmet liners to dampen blast waves. The objective of this research is to develop an experimental technique to test these commercially available materials when subject to blast waves and evaluate their blast mitigating behavior. A 40-mm-bore gas gun is being used as a shock tube to generate blast waves (ranging from 1 to 500 psi) in a test fixture at the gun muzzle. A fast opening valve is used to release nitrogen gas from the breech to impact instrumented targets. The targets consist of aluminum/ viscoelastic polymer/ aluminum materials. Blast attenuation is determined through the measurement of pressure and accelerometer data in front of and behind the target. The experimental technique, calibration and checkout procedures, and results will be presented.

  2. Emergence of collective action and environmental networking in relation to radioactive waste management

    International Nuclear Information System (INIS)

    Williams, R.G.; Payne, B.A.

    1985-01-01

    This paper explores the relationship between the national environmental movement and nuclear technology in relation to a local emergent group. The historical development of nuclear technology in this conutry has followed a path leading to continued fear and mistrust of waste management by a portion of the population. At the forefront of opposition to nuclear technology are people and groups endorsing environmental values. Because of the antinuclear attitudes of environmentalists and the value orientation of appropriate technologists in the national environmental movement, it seems appropriate for local groups to call on these national groups for assistance regarding nuclear-related issues. A case study is used to illustrate how a local action group, once integrated into a national environmental network, can become an effective, legitimate participant in social change. The formation, emergence, mobilization, and networking of a local group opposed to a specific federal radioactive waste management plan is described based on organizational literature. However, inherent contradictions in defining the local versus national benefits plus inherent problems within the environmental movement could be acting to limit the effectiveness of such networks. 49 refs

  3. Proceedings of the international workshop on aged and decommissioned material collection and testing for structural integrity purposes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This workshop was sponsored by the CEC DG XI and XII/JRC Petten/AMES and by the Principal Working Group 3 (PWG-3) on reactor component integrity of the NEA CSNI, and it was hosted by the CEN Mol, Belgium. The activities of PWG-3 fall into three main areas: non-destructive examination (NDE), fracture analysis, and ageing/materials degradation. The topic of the workshop falls into the third area of ageing and materials degradation. The titles of the papers are: AMES and other European networks in Integrity of Ageing Structures; Over View of Proving Test on the Reliability of Material of Nuclear Power Plant Components; Activities on Ageing Degradation Phenomena of NPP in Korea; Capability of Investigation on Decommissioned Parts from NPPs at the MPA Stuttgart; How Accurately can Surveillance Specimens Reflect the True State of RPV Materials?; Applicability of Design Codes to Aged Materials; Microstructural Investigations of as-Fabricated, Long-Term Thermally Aged and Neutron Irradiated RPV Materials: An Atom Probe Study; Proposed Post-Service Investigations on Decommissioned Greifswald Units; Tools and Experience in Post Irradiation Examination of Structural Core Components at PSI Hot laboratory; Testing of Beznau NPP Unit 1 Steam Generator Cast Stainless Steel Elbows; Mechanical Properties Characterisation of Irradiated Materials From Operating or Decommissioned Nuclear Power Plants; Long Term Ageing of Cast Ti-Stabilised Stainless Steel; Enhanced Surveillance of Nuclear Reactor Pressure Vessels. Discussions and conclusions are also presented

  4. Identification and Assessment of Material Models for Age-Related Degradation of Structures and Passive Components in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Nie,J.; Braverman, J.; Hofmayer, C.; Kim, M. K.; Choi, I-K.

    2009-04-27

    When performing seismic safety assessments of nuclear power plants (NPPs), the potential effects of age-related degradation on structures, systems, and components (SSCs) should be considered. To address the issue of aging degradation, the Korea Atomic Energy Research Institute (KAERI) has embarked on a five-year research project to develop a realistic seismic risk evaluation system which will include the consideration of aging of structures and components in NPPs. Three specific areas that are included in the KAERI research project, related to seismic probabilistic risk assessment (PRA), are probabilistic seismic hazard analysis, seismic fragility analysis including the effects of aging, and a plant seismic risk analysis. To support the development of seismic capability evaluation technology for degraded structures and components, KAERI entered into a collaboration agreement with Brookhaven National Laboratory (BNL) in 2007. The collaborative research effort is intended to continue over a five year period with the goal of developing seismic fragility analysis methods that consider the potential effects of age-related degradation of SSCs, and using these results as input to seismic PRAs. In the Year 1 scope of work BNL collected and reviewed degradation occurrences in US NPPs and identified important aging characteristics needed for the seismic capability evaluations that will be performed in the subsequent evaluations in the years that follow. This information is presented in the Annual Report for the Year 1 Task, identified as BNL Report-81741-2008 and also designated as KAERI/RR-2931/2008. The report presents results of the statistical and trending analysis of this data and compares the results to prior aging studies. In addition, the report provides a description of U.S. current regulatory requirements, regulatory guidance documents, generic communications, industry standards and guidance, and past research related to aging degradation of SSCs. This report

  5. TERRITORIES, TERRITORIALITIES AND IDENTITIES: MATERIAL RELATIONS, SYMBOLIC, AND OF GENDER IN THE COUNTRYSIDE

    Directory of Open Access Journals (Sweden)

    Lívia Aparecida Pires de

    2017-06-01

    Full Text Available The territory is understood as an appropriate space, delimitated by power relations, and constituted by material and symbolic relations which provide elements to the territorialities development and for forming men and women identities. In the territory of familiar production, the sexual division of labor and of spaces causes the 'invisibility' of women's work in the productive sphere, fact that influences on the construction of the rural women’s identity. However, women exercise their territorialities in both spaces and their productive and reproductive activities are fundamental to the family's livingness and permanence in the countryside. In this sense, it proposes to analyze the territorialities and the territorial identity of the subjects of the countryside and ascertain how this discussion contributes to the recognition of rural woman's identity. To the development of this research, have been taken theoretical research about: territory, territoriality, identity, gender and domestic space.

  6. Progress in heavy-fermion superconductivity. Ce115 and related materials

    International Nuclear Information System (INIS)

    Thompson, Joe D.; Fisk, Zachary

    2012-01-01

    Ce115 and related Ce compounds are particularly suited to detailed studies of the interplay of antiferromagnetic order, unconventional superconductivity and quantum criticality due to their availability as high quality single crystals and their tunability by chemistry, pressure and magnetic field. Neutron-scattering, NMR and angle-resolved thermodynamic measurements have deepened the understanding of this interplay. Very low temperature experiments in pure and lightly doped CeCoIn 5 have elaborated the FFLO-like magnetic state near the field-induced quantum-critical point. New, related superconducting materials have broadened the phase space for discovering underlying principles of heavy-fermion superconductivity and its relationship to nearby states. (author)

  7. Readability of the Most Commonly Accessed Arthroscopy-Related Online Patient Education Materials.

    Science.gov (United States)

    Akinleye, Sheriff D; Krochak, Ryan; Richardson, Nicholas; Garofolo, Garret; Culbertson, Maya Deza; Erez, Orry

    2018-04-01

    To assess the readability and comprehension of written text by the most commonly visited websites containing patient education materials on common conditions that can be treated arthroscopically. We examined 50 websites, assessed independently by 2 orthopaedic surgery residents (S.A. and G.G.), with educational materials on 5 common conditions treated by arthroscopic surgeons: anterior cruciate ligament (ACL) tear, meniscus tear, hip labral tear, shoulder labral tear, and rotator cuff tear. Following a Google search for each condition, we analyzed the 10 most visited websites for each disorder using a widely used and validated tool for assessing the reading levels of written materials (Flesch-Kincaid formula). The average grade reading level of the 50 websites studied was 9.90 with a reading ease of 52.14 ("fairly difficult, high school"). Only 26% of the websites were at or below the national average of an eighth-grade reading level. Of the 5 conditions treated by arthroscopic surgery, ACL tear had the highest average grade reading level at 10.73 ± 1.54, whereas meniscus tear had the lowest at 9.31 ± 1.81. Every condition in this study had an average readability at or above the ninth-grade reading level. The most frequently accessed materials for patients with injuries requiring arthroscopic surgery exceeds the readability recommendations of the American Medical Association and National Institutes of Health, as well as the average reading ability of US adults. Given the fact that these are the most commonly visited websites by the lay public, there needs to be a greater emphasis on tailoring written information to the literacy levels of the patient population. This study emphasizes the discrepancy between the recommended versus the measured reading levels of online patient education materials related to conditions treated by arthroscopic surgeons. The subject matter of these conditions is inherently complex; thus, relying solely on text to inform patients

  8. Redox Bias in Loss on Ignition Moisture Measurement for Relatively Pure Plutonium-Bearing Oxide Materials

    International Nuclear Information System (INIS)

    Eller, P. G.; Stakebake, J. L.; Cooper, T. D.

    2002-01-01

    This paper evaluates potential analytical bias in application of the Loss on Ignition (LOI) technique for moisture measurement to relatively pure (plutonium assay of 80 wt.% or higher) oxides containing uranium that have been stabilized according to stabilization and storage standard DOE-STD-3013-2000 (STD- 3013). An immediate application is to Rocky Flats (RF) materials derived from high-grade metal hydriding separations subsequently treated by multiple calcination cycles. Specifically evaluated are weight changes due to oxidation/reduction of multivalent impurity oxides that could mask true moisture equivalent content measurement. Process knowledge and characterization of materials representing complex-wide materials to be stabilized and packaged according to STD-3013, and particularly for the immediate RF target stream, indicate that oxides of uranium, iron and gallium are the only potential multivalent constituents expected to be present above 0.5 wt.%. The evaluation show s that of these constituents, with few exceptions, only uranium oxides can be present at a sufficient level to produce weight gain biases significant with respect to the LOI stability test. In general, these formerly high-value, high-actinide content materials are reliably identifiable by process knowledge and measurement. Significant bias also requires that UO2 components remain largely unoxidized after calcination and are largely converted to U3O8 during LOI testing at only slightly higher temperatures. Based on well-established literature, it is judged unlikely that this set of conditions will be realized in practice. We conclude that it is very likely that LOI weight gain bias will be small for the immediate target RF oxide materials containing greater than 80 wt.% plutonium plus a much smaller uranium content. Recommended tests are in progress to confirm these expectations and to provide a more authoritative basis for bounding LOI oxidation/reduction biases. LOI bias evaluation is more

  9. Brain Tumor Database, a free relational database for collection and analysis of brain tumor patient information.

    Science.gov (United States)

    Bergamino, Maurizio; Hamilton, David J; Castelletti, Lara; Barletta, Laura; Castellan, Lucio

    2015-03-01

    In this study, we describe the development and utilization of a relational database designed to manage the clinical and radiological data of patients with brain tumors. The Brain Tumor Database was implemented using MySQL v.5.0, while the graphical user interface was created using PHP and HTML, thus making it easily accessible through a web browser. This web-based approach allows for multiple institutions to potentially access the database. The BT Database can record brain tumor patient information (e.g. clinical features, anatomical attributes, and radiological characteristics) and be used for clinical and research purposes. Analytic tools to automatically generate statistics and different plots are provided. The BT Database is a free and powerful user-friendly tool with a wide range of possible clinical and research applications in neurology and neurosurgery. The BT Database graphical user interface source code and manual are freely available at http://tumorsdatabase.altervista.org. © The Author(s) 2013.

  10. Bidirectional Relations of Impulsive Personality and Alcohol Use Across Three Waves of Data Collection.

    Science.gov (United States)

    Kaiser, Alison J; Davis, Heather A; Milich, Richard; Smith, Gregory T; Charnigo, Richard

    2018-06-11

    To explore the bidirectional relations between alcohol use and three impulsive personality traits, to advance understanding of risk processes. 525 college students (mean age = 18.95 years) recruited in August 2008 and 2009 and followed up annually for three years. Personality and past/current substance use were assessed. T2 sensation seeking mediated the predictive relationship between T1 and T3 alcohol use, and T2 alcohol use mediated the predictive relationship between T1 and T3 sensation seeking. In addition, T2 alcohol problems mediated the predictive relationship between T1 alcohol use and T3 negative urgency. Findings support a bidirectional relationship between sensation seeking and alcohol use, and drinking anticipates drinking problems, which predict increases in negative urgency. For some individuals, there appears to be an ongoing process of increased risk in the form of increases in both drinking and high-risk personality traits.

  11. Sustainable Materials Management (SMM) Web Academy Webinar: Building Collection Infrastructure for Composting: Success in the Greater Worcester, Massachusetts Area

    Science.gov (United States)

    This is a webinar page for the Sustainable Management of Materials (SMM) Web Academy webinar titled Let’s WRAP (Wrap Recycling Action Program): Best Practices to Boost Plastic Film Recycling in Your Community

  12. [Proposal of a method for collective analysis of work-related accidents in the hospital setting].

    Science.gov (United States)

    Osório, Claudia; Machado, Jorge Mesquita Huet; Minayo-Gomez, Carlos

    2005-01-01

    The article presents a method for the analysis of work-related accidents in hospitals, with the double aim of analyzing accidents in light of actual work activity and enhancing the vitality of the various professions that comprise hospital work. This process involves both research and intervention, combining knowledge output with training of health professionals, fostering expanded participation by workers in managing their daily work. The method consists of stimulating workers to recreate the situation in which a given accident occurred, shifting themselves to the position of observers of their own work. In the first stage of analysis, workers are asked to show the work analyst how the accident occurred; in the second stage, the work accident victim and analyst jointly record the described series of events in a diagram; in the third, the resulting record is re-discussed and further elaborated; in the fourth, the work accident victim and analyst evaluate and implement measures aimed to prevent the accident from recurring. The article concludes by discussing the method's possibilities and limitations in the hospital setting.

  13. In vivo release of calcitonin gene-related peptide-like material from the cervicotrigeminal area in the rat. Effects of electrical and noxious stimulations of the muzzle.

    Science.gov (United States)

    Pohl, M; Collin, E; Bourgoin, S; Clot, A M; Hamon, M; Cesselin, F; Le Bars, D

    1992-10-01

    The continuous perfusion with an artificial cerebrospinal fluid of the cervicotrigeminal area of the spinal cord in halothane-anaesthetized rats allowed the collection of calcitonin gene-related peptide-like material with the same immunological and chromatographic characteristics as authentic rat alpha-calcitonin gene-related peptide. The spinal release of calcitonin gene-related peptide-like material could be significantly increased by the local application of 60 mM K+ (approximately +100%), high-intensity percutaneous electrical stimulation (approximately +200%) and noxious heat (by immersion in water at 52 degrees C; approximately +150%) applied to the muzzle. By contrast, noxious mechanical (pinches) and chemical (subcutaneous formalin injection) stimulations and deep cooling (by immersion in water at 0 degrees C) of the muzzle did not alter the spinal release of calcitonin gene-related peptide-like material. In addition, low-intensity electrical stimulation, recruiting only the A alpha/beta primary afferent fibres, significantly reduced (approximately -30%) the release of calcitonin gene-related peptide-like material from the cervicotrigeminal area. These data suggest that among the various types of natural noxious stimuli, noxious heat may selectively excite calcitonin gene-related peptide-containing A delta and C primary afferent fibres projecting within the dorsal horn of the spinal cord, and that activation of A alpha/beta fibres reduces spontaneous calcitonin gene-related peptide-like material release possibly through an inhibitory presynaptic control of calcitonin gene-related peptide-containing A delta/C fibres.

  14. Improvements in or relating to a fluidizing process and apparatus for treating comminuted solid materials

    Energy Technology Data Exchange (ETDEWEB)

    1949-02-15

    A fluidizing process of treating comminuted solid materials cyclically with different gaseous materials in different treatment zones, which comprises fluidizing comminuted solid material in contiguous treatment zones with different gaseous materials, and establishing unequal fluid-static heads in said zones to effect cyclic flow of said solid material through said zones which are in communication adjacent their respective top and bottom portions and permit the overflow of said solid material from one of said zones to another.

  15. Fiber composition of a diversity panel of the world collection of sugarcane (Saccharum spp. and related grasses

    Directory of Open Access Journals (Sweden)

    James Ryan Todd

    2017-12-01

    Full Text Available ABSTRACT The world collection of sugarcane (Saccharum hybrids. and related grasses (WCSRG is an important source of genes for sugarcane and energycane breeding. The core collection or diversity panel of the WCSRG was created in Canal Point with 300 accession and 10 checks to evaluate its diversity. The fiber components of the species and accessions within the WCSRG are unknown, so a shredded and dried fiber sample was taken from each accession and sent for fiber analysis. The acetyl groups, acid insoluble lignin, acid soluble lignin, arabinan, glucan, holocellulose, total lignin, structural ash, and xylan were quantified on a % fiber basis and nonstructural ash on a % total basis. There were significant, but not large differences between species for holocellulose, lignin, acetyl, acid soluble lignin, nonstructural ash, and glucan. For each trait, Saccharum spontaneum had significantly more holocellulose, glucan, lignin, and nonstructural ash and less acetyl and acid soluble lignin than other species. In all populations, glucan and holocellulose were positively correlated and glucan and lignin were negatively correlated. In hybrids, internode length correlated positively with holocellulose and nonstructural ash and negatively with lignin. Principal component analysis indicated that a large amount of diversity exists within each of the species. The results suggest that strategic use of the WCSRG could provide both positive and negative selection for fiber-related traits could be made within all species of the collection.

  16. Diagrams and Relational Maps: The Use of Graphic Elicitation Techniques with Interviewing for Data Collection, Analysis, and Display

    Directory of Open Access Journals (Sweden)

    Andrea J. Copeland PhD

    2012-12-01

    Full Text Available Graphic elicitation techniques, which ask research participants to provide visual data representing personal understandings of concepts, experiences, beliefs, or behaviors, can be especially useful in helping participants to express complex or abstract ideas or opinions. The benefits and drawbacks of using graphic elicitation techniques for data collection, data analysis, and data display in qualitative research studies are analyzed using examples from a research study that employed data matrices and relational maps in conjunction with semi-structured interviews. Results from this analysis demonstrate that the use of these combined techniques for data collection facilitates triangulation and helps to establish internal consistency of data, thereby increasing the trustworthiness of the interpretation of that data and lending support to validity and reliability claims. Findings support the notion that graphic elicitation techniques can be highly useful in qualitative research studies at the data collection, the data analysis, and the data reporting stages. For example, this study found that graphic elicitation techniques are especially useful for eliciting data related to emotions and emotional experiences.

  17. Negotiating power relations, gender equality, and collective agency: are village health committees transformative social spaces in northern India?

    Science.gov (United States)

    Scott, Kerry; George, Asha S; Harvey, Steven A; Mondal, Shinjini; Patel, Gupteswar; Sheikh, Kabir

    2017-09-15

    Participatory health initiatives ideally support progressive social change and stronger collective agency for marginalized groups. However, this empowering potential is often limited by inequalities within communities and between communities and outside actors (i.e. government officials, policymakers). We examined how the participatory initiative of Village Health, Sanitation, and Nutrition Committees (VHSNCs) can enable and hinder the renegotiation of power in rural north India. Over 18 months, we conducted 74 interviews and 18 focus groups with VHSNC members (including female community health workers and local government officials), non-VHSNC community members, NGO staff, and higher-level functionaries. We observed 54 VHSNC-related events (such as trainings and meetings). Initial thematic network analysis supported further examination of power relations, gendered "social spaces," and the "discourses of responsibility" that affected collective agency. VHSNCs supported some re-negotiation of intra-community inequalities, for example by enabling some women to speak in front of men and perform assertive public roles. However, the extent to which these new gender dynamics transformed relations beyond the VHSNC was limited. Furthermore, inequalities between the community and outside stakeholders were re-entrenched through a "discourse of responsibility": The comparatively powerful outside stakeholders emphasized community responsibility for improving health without acknowledging or correcting barriers to effective VHSNC action. In response, some community members blamed peers for not taking up this responsibility, reinforcing a negative collective identity where participation was futile because no one would work for the greater good. Others resisted this discourse, arguing that the VHSNC alone was not responsible for taking action: Government must also intervene. This counter-narrative also positioned VHSNC participation as futile. Interventions to strengthen

  18. Estimation of collective effective dose equivalent from environmental radiation and radioactive materials in Japan. A preliminary study

    International Nuclear Information System (INIS)

    Maruyama, Takashi; Noda, Yutaka; Takeshita, Mitsue; Iwai, Kazuo.

    1994-01-01

    The peaceful uses of nuclear power and radiations have been developed into a stage of practical applications for human life. Radiation causes harmful effects to human beings, although human beings receives a number of invaluable benefits from the nuclear energy and the uses of radiation. In order to examine the optimization of radiation protection in these practices, collective effective dose equivalent from environmental exposures due to natural and artificial radiations have been preliminarily evaluated using most recent data. The resultant collective doses were compared with those from medical and occupational exposures. It is noted that, in Japan, the collective effective dose from environmental radiation sources can be approximately same to that from medical exposure. (author)

  19. My Kind of Town (Chicago Is): Content Collections Optimize Learning Related to the 2018 AANA Annual Meeting.

    Science.gov (United States)

    Hunt, Timothy J; Brand, Jefferson C; Rossi, Michael J; Lubowitz, James H

    2018-04-01

    The 2018 Arthroscopy Association of North America Annual Meeting represents an opportunity to deepen one's understanding of a wide variety of topics. Arthroscopy journal readers have diverse practices and interests, and the meeting is designed to accommodate individual needs. The constructivist learning theory provides that scholars learn in many different ways. Thus, to enrich your learning experience, selected recently published Arthroscopy articles are suggested to supplement material presented at the meeting. The articles are collated on our web site in Content Collections, to allow meeting participants to prepare and to allow those unable to attend to remain engaged. We offer suggestions and encourage readers to customize their own learning experience. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  20. Derivation of residual radioactive material guidelines for the Laboratory for Energy-Related Health Research site

    International Nuclear Information System (INIS)

    Chapman, T.E.

    1993-11-01

    Residual radioactive material guidelines were derived for the Laboratory for Energy-Related Health Research (LEHR) Environmental Restoration (ER) site in Davis, California. The guideline derivation was based on a dose limit of 100 mrem/yr. The US Department of Energy (DOE) residual radioactive material guideline computer code was used in this evaluation. This code implements the methodology described in the DOE manual for implementing residual radioactive material guidelines. Three potential site utilization scenarios were considered with the assumption that following ER action, the site will be used without radiological restrictions. The defined scenarios vary with regard to use of the site, time spent at the site, and sources of food consumed. The results of the evaluation indicate that the basic dose limit of 100 mrem/yr will not be exceeded, provided that the soil concentrations of these radionuclides at the LEHR site do not exceed the scenario-specific values calculated by this study. Except for the extent of the contaminated zone (which is very conservative), assumptions used are as site-specific as possible, given available information. The derived guidelines are single- radionuclide guidelines and are linearly proportional to the dose limit used in the calculations. In setting the actual residual soil contamination guides for the LEHR site, DOE will apply the as low as reasonably achievable policy to the decision-making process, along with other factors such as whether a particular scenario is reasonable and appropriate, as well as using site-specific inputs to computer models based on data not yet fully determined

  1. Readability assessment of internet-based patient education materials related to facial fractures.

    Science.gov (United States)

    Sanghvi, Saurin; Cherla, Deepa V; Shukla, Pratik A; Eloy, Jean Anderson

    2012-09-01

    Various professional societies, clinical practices, hospitals, and health care-related Web sites provide Internet-based patient education material (IPEMs) to the general public. However, this information may be written above the 6th-grade reading level recommended by the US Department of Health and Human Services. The purpose of this study is to assess the readability of facial fracture (FF)-related IPEMs and compare readability levels of IPEMs provided by four sources: professional societies, clinical practices, hospitals, and miscellaneous sources. Analysis of IPEMs on FFs available on Google.com. The readability of 41 FF-related IPEMs was assessed with four readability indices: Flesch-Kincaid Grade Level (FKGL), Flesch Reading Ease Score (FRES), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (Gunning FOG). Averages were evaluated against national recommendations and between each source using analysis of variance and t tests. Only 4.9% of IPEMs were written at or below the 6th-grade reading level, based on FKGL. The mean readability scores were: FRES 54.10, FKGL 9.89, SMOG 12.73, and Gunning FOG 12.98, translating into FF-related IPEMs being written at a "difficult" writing level, which is above the level of reading understanding of the average American adult. IPEMs related to FFs are written above the recommended 6th-grade reading level. Consequently, this information would be difficult to understand by the average US patient. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

  2. Readability of Trauma-Related Patient Education Materials From the American Academy of Orthopaedic Surgeons.

    Science.gov (United States)

    Eltorai, Adam E M; P Thomas, Nathan; Yang, Heejae; Daniels, Alan H; Born, Christopher T

    2016-02-01

    According to the american medical association (AMA) and the national institutes of health (NIH), the recommended readability of patient education materials should be no greater than a sixth-grade reading level. The online patient education information produced by the american academy of orthopaedic surgeons (AAOS) may be too complicated for some patients to understand. This study evaluated whether the AAOS's online trauma-related patient education materials meet recommended readability guidelines for medical information. Ninety-nine articles from the "Broken Bones and Injuries" section of the AAOS-produced patient education website, orthoinfo.org, were analyzed for grade level readability using the Flesch-Kincaid formula, a widely-used and validated tool to evaluate the text reading level. Results for each webpage were compared to the AMA/NIH recommended sixth-grade reading level and the average reading level of U.S. adults (eighth-grade). The mean (SD) grade level readability for all patient education articles was 8.8 (1.1). All but three of the articles had a readability score above the sixth-grade level. The readability of the articles exceeded this level by an average of 2.8 grade levels (95% confidence interval, 2.6 - 3.0; P reading skill level of U.S. adults (eighth grade) by nearly an entire grade level (95% confidence interval, 0.6-1.0; P education website have readability levels that may make comprehension difficult for a substantial portion of the patient population.

  3. Constitutive Relation of Engineering Material Based on SIR Model and HAM

    Directory of Open Access Journals (Sweden)

    Haoxiang He

    2014-01-01

    Full Text Available As an epidemic mathematical model, the SIR model represents the transition of the Susceptible, Infected, and Recovered. The profound implication of the SIR model is viewed as the propagation and dynamic evolutionary process of the different internal components and the characteristics in a complex system subject to external effect. The uniaxial stress-strain curve of engineering material represents the basic constitutive relation, which also represents the damage propagation in the units of the damaged member. Hence, a novel dynamic stress-strain model is established based on the SIR model. The analytical solution and the approximate solution for the proposed model are represented according to the homotopy analysis method (HAM, and the relationship of the solution and the size effect and the strain rate is discussed. In addition, an experiment on the size effect of confined concrete is carried out and the solution of SIR model is suitable for simulation. The results show that the mechanical mechanism of the parameters of the uniaxial stress-strain model proposed in this paper reflects the actual characteristics of the materials. The solution of the SIR model can fully and accurately show the change of the mechanical performance and the influence of the size effect and the strain rate.

  4. Special quasirandom structures for gadolinia-doped ceria and related materials

    KAUST Repository

    Wang, Hao

    2012-01-01

    Gadolinia doped ceria in its doped or strained form is considered to be an electrolyte for solid oxide fuel cell applications. The simulation of the defect processes in these materials is complicated by the random distribution of the constituent atoms. We propose the use of the special quasirandom structure (SQS) approach as a computationally efficient way to describe the random nature of the local cation environment and the distribution of the oxygen vacancies. We have generated two 96-atom SQS cells describing 9% and 12% gadolinia doped ceria. These SQS cells are transferable and can be used to model related materials such as yttria stabilized zirconia. To demonstrate the applicability of the method we use density functional theory to investigate the influence of the local environment around a Y dopant in Y-codoped gadolinia doped ceria. It is energetically favourable if Y is not close to Gd or an oxygen vacancy. Moreover, Y-O bonds are found to be weaker than Gd-O bonds so that the conductivity of O ions is improved. © 2012 the Owner Societies.

  5. Investigation of metal/carbon-related materials for fuel cell applications by electronic structure calculations

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Ki-jeong [Korea Research Institute of Chemical Technology, P.O.Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of)]. E-mail: kong@krict.re.kr; Choi, Youngmin [Korea Research Institute of Chemical Technology, P.O.Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Ryu, Beyong-Hwan [Korea Research Institute of Chemical Technology, P.O.Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Lee, Jeong-O [Korea Research Institute of Chemical Technology, P.O.Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Chang, Hyunju [Korea Research Institute of Chemical Technology, P.O.Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of)

    2006-07-15

    The potential of carbon-related materials, such as carbon nanotubes (CNTs) and graphite nanofibers (GNFs), supported metal catalysts as an electrode for fuel cell application was investigated using the first-principle electronic structure calculations. The stable binding geometries and energies of metal catalysts are determined on the CNT surface and the GNF edge. The catalyst metal is more tightly bound to the GNF edge than to the CNT surface because of the existence of active dangling bonds of edge carbon atoms. The diffusion barrier of metal atoms on the surface and edge is also obtained. From our calculation results, we have found that high dispersity is achievable for GNF due to high barrier against the diffusion of metal atoms, while CNT appears less suitable. The GNF with a large edge-to-wall ratio is more suitable for the high-performance electrode than perfect crystalline graphite or CNT.

  6. Investigation of metal/carbon-related materials for fuel cell applications by electronic structure calculations

    International Nuclear Information System (INIS)

    Kong, Ki-jeong; Choi, Youngmin; Ryu, Beyong-Hwan; Lee, Jeong-O; Chang, Hyunju

    2006-01-01

    The potential of carbon-related materials, such as carbon nanotubes (CNTs) and graphite nanofibers (GNFs), supported metal catalysts as an electrode for fuel cell application was investigated using the first-principle electronic structure calculations. The stable binding geometries and energies of metal catalysts are determined on the CNT surface and the GNF edge. The catalyst metal is more tightly bound to the GNF edge than to the CNT surface because of the existence of active dangling bonds of edge carbon atoms. The diffusion barrier of metal atoms on the surface and edge is also obtained. From our calculation results, we have found that high dispersity is achievable for GNF due to high barrier against the diffusion of metal atoms, while CNT appears less suitable. The GNF with a large edge-to-wall ratio is more suitable for the high-performance electrode than perfect crystalline graphite or CNT

  7. Chemistry, materials and related problems in steam generators of power stations

    International Nuclear Information System (INIS)

    Mathur, P.K.

    2000-01-01

    The operational reliability and availability of power plants are considerably influenced by chemical factors. Researches all over the world indicate that several difficulties in power plants can be traced to off-normal or abnormal water chemistry conditions. Whatever the source of energy, be it fossil fuel or nuclear fuel, the ultimate aim is steam generation to drive a turbine. It is, therefore, natural that problems of water chemistry and material compatibility are similar in thermal and nuclear power stations. The present paper discusses various types of problems in the form of corrosion damages, taking place in the boiler-turbine cycles and describes different types of boiler feed water/boiler water treatments that have been in use both in nuclear and thermal power stations. Current positions in relation to requirements of boiler feed water, boiler water and steam quality have been described

  8. Dielectric relaxations in non-metallic materials related to Y-Ba-Cu-O superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Bennani, H.; Pilet, J.C. (Lab. Instrumentation, Rennes-1 Univ., 35 (France)); Guilloux-Viry, M.; Perrin, C.; Perrin, A.; Sergent, M. (Lab. de Chimie Minerale B, C.N.R.S., 35 - Rennes (France))

    1990-10-15

    In relation with high Tc superconducting material studies, dielectric measurements have been carried out, in the frequency range 10 Hz - 100 kHz, on two powdered compounds belonging to the Y-Ba-Cu-O system. The non-metallic tetragonal phases YBa{sub 2}Cu{sub 3}O{sub 6+x} exhibit dielectric relaxations: for the studied samples (x<0.4) the activation energy U is observed in the range 0.5related to the presence of electrical dipoles due to the local dissymmetries induced by oxygen vacancies in the Cu-O chains. The insulating green phase Y{sub 2}BaCuO{sub 5} has a lower activation energy U {approx equal} 0.4 eV and an entropy factor A {approx equal} 10{sup 10} Hz. A second dielectric relaxation has been detected at higher temperature, near 400 K. Additional measurements to 77 K at 1 MHz give a value of dielectric constant {epsilon}'=3 and a low loss factor tg{delta}=10{sup -3}: this latter value is comparable to the one of lanthanum gallate recently proposed as a substrate for high frequency uses. This result enhances the previously reported potential interest of this material as substrate or buffer layer for preparation of superconducting thin films for high frequency applications. (orig.).

  9. Development of Contextual Mathematics teaching Material integrated related sciences and realistic for students grade xi senior high school

    Science.gov (United States)

    Helma, H.; Mirna, M.; Edizon, E.

    2018-04-01

    Mathematics is often applied in physics, chemistry, economics, engineering, and others. Besides that, mathematics is also used in everyday life. Learning mathematics in school should be associated with other sciences and everyday life. In this way, the learning of mathematics is more realstic, interesting, and meaningful. Needs analysis shows that required contextual mathematics teaching materials integrated related sciences and realistic on learning mathematics. The purpose of research is to produce a valid and practical contextual mathematics teaching material integrated related sciences and realistic. This research is development research. The result of this research is a valid and practical contextual mathematics teaching material integrated related sciences and realistic produced

  10. Actions of radiation protection in the collection of discarded radioactive material; Ações de proteção radiológica no recolhimento de material radioativo descartado

    Energy Technology Data Exchange (ETDEWEB)

    Neri, E.P.M.; Silva, F.C.A. da, E-mail: dasilva@ird.gov.br [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Riode Janeiro, RJ (Brazil)

    2017-07-01

    Brazil has approximately 2000 radiative facilities that use radiation sources in their processes and are controlled by The Brazilian Nuclear Energy Commission - CNEN through standards, authorizations and inspections. These radioactive materials, whether in the form of waste or radioactive source, used in medical, industrial, research, etc. are sometimes discarded and found in inappropriate places, such as garbage dumps, industrial waste, streets, squares, etc. found by urban cleaning professionals without the proper knowledge of them. The work presents the radiation protection actions required for the safe collection of radioactive material to be performed by these professionals. According to the type of radioactive material the main actions of radiation protection are, among others: recognition of a radioactive material; correct use of personal protective equipment to contain possible radiation contamination; implementation of an area control etc. In order for the actions of recognition and collection of discarded radioactive material to be effective, there is a need to implement a training program in radiation protection for urban cleaning professionals.

  11. Gender and engineering aptitude: Is the color of science, technology, engineering, and math materials related to children's performance?

    Science.gov (United States)

    Mulvey, Kelly Lynn; Miller, Bridget; Rizzardi, Victoria

    2017-08-01

    To investigate gender stereotypes, demonstrated engineering aptitude, and attitudes, children (N=105) solved an engineering problem using either pastel-colored or primary-colored materials. Participants also evaluated the acceptability of denial of access to engineering materials based on gender and counter-stereotypic preferences (i.e., a boy who prefers pastel-colored materials). Whereas material color was not related to differences in female participants' performance, younger boys assigned to pastel materials demonstrated lower engineering aptitude than did other participants. In addition, results documented age- and gender-related differences; younger participants, and sometimes boys, exhibited less flexibility regarding gender stereotypes than did older and female participants. The findings suggest that attempts to enhance STEM (science, technology, engineering, and math) engagement or performance through the color of STEM materials may have unintended consequences. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Recycling of plastic materials collected by `Duales System Deutschland (DSD)`; Werkstoffliches Recycling von Kunststoffen aus DSD-Sammlungen

    Energy Technology Data Exchange (ETDEWEB)

    Baumgaertner, D. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Heinz, H. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Hiller, W. [Lech-Elektrizitaetswerke AG, Augsburg (Germany)

    1996-01-01

    The article deals with the importance, problems and technology of plastics recycling. It gives an overview of the specific demands of plastics recyclates, the necessary process technology, and the characteristic values of materials. (orig.) [Deutsch] Es wird die Bedeutung, die Problematik und Technik des werkstofflichen Recyclings von Kunststoffen dargestellt. Dabei sind sowohl die spezifischen Anforderungen des Einsatzstoffes als Recyclingmaterial, die notwendige Verfahrenstechnik als auch die werkstofflichen Kennwerte in einer Uebersicht dargestellt. (orig.)

  13. The causal relation between children’s life satisfaction and materialism and the role of advertising exposure

    NARCIS (Netherlands)

    Opree, S.J.; Buijzen, M.; Eisend, M.; Langner, T.

    2011-01-01

    This longitudinal survey study was designed to determine the causal direction of the relation between materialism and life satisfaction among children. We tested the hypothesis that life satisfaction negatively affects materialism. In addition, we tested the hypothesis that this effect would be

  14. Synthesis, toxicity, biocompatibility, and biomedical applications of graphene and graphene-related materials

    Directory of Open Access Journals (Sweden)

    Gurunathan S

    2016-05-01

    Full Text Available Sangiliyandi Gurunathan, Jin-Hoi Kim Stem Cell and Regenerative Biology, Konkuk University, Seoul, Republic of Korea Abstract: Graphene is a two-dimensional atomic crystal, and since its development it has been applied in many novel ways in both research and industry. Graphene possesses unique properties, and it has been used in many applications including sensors, batteries, fuel cells, supercapacitors, transistors, components of high-strength machinery, and display screens in mobile devices. In the past decade, the biomedical applications of graphene have attracted much interest. Graphene has been reported to have antibacterial, antiplatelet, and anticancer activities. Several salient features of graphene make it a potential candidate for biological and biomedical applications. The synthesis, toxicity, biocompatibility, and biomedical applications of graphene are fundamental issues that require thorough investigation in any kind of applications related to human welfare. Therefore, this review addresses the various methods available for the synthesis of graphene, with special reference to biological synthesis, and highlights the biological applications of graphene with a focus on cancer therapy, drug delivery, bio-imaging, and tissue engineering, together with a brief discussion of the challenges and future perspectives of graphene. We hope to provide a comprehensive review of the latest progress in research on graphene, from synthesis to applications. Keywords: biomedical applications, cancer therapy, drug delivery, graphene, graphene-related materials, tissue engineering, toxicity 

  15. Radiological dose assessment related to management of naturally occurring radioactive materials generated by the petroleum industry

    International Nuclear Information System (INIS)

    Smith, K.P.; Blunt, D.L.; Williams, G.P.

    1996-09-01

    A preliminary radiological dose assessment of equipment decontamination, subsurface disposal, landspreading, equipment smelting, and equipment burial was conducted to address concerns regarding the presence of naturally occurring radioactive materials (NORM) in production waste streams. The assessment estimated maximum individual dose equivalents for workers and the general public. Sensitivity analyses of certain input parameters also were conducted. On the basis of this assessment, it is concluded that (1) regulations requiring workers to wear respiratory protection during equipment cleaning operations are likely to result in lower worker doses, (2) underground injection and downhole encapsulation of NORM wastes present a negligible risk to the general public, and (3) potential doses to workers and the general public related to smelting NORM-contaminated equipment can be controlled by limiting the contamination level of the initial feed. It is recommended that (1) NORM wastes be further characterized to improve studies of potential radiological doses; (2) states be encouraged to permit subsurface disposal of NORM more readily, provided further assessments support this study; results; (3) further assessment of landspreading NORM wastes be conducted; and (4) the political, economic, sociological, and nonradiological issues related to smelting NORM-contaminated equipment be studied to fully examine the feasibility of this disposal option

  16. Photo-Machining of Semiconductor Related Materials with Femtosecond Laser Ablation and Characterization of Its Properties

    Science.gov (United States)

    Yokotani, Atushi; Mizuno, Toshio; Mukumoto, Toru; Kawahara, Kousuke; Ninomiya, Takahumi; Sawada, Hiroshi; Kurosawa, Kou

    We have analyzed the drilling process with femtosecond laser on the silicon surface in order to investigate a degree of thermal effect during the dicing process of the very thin silicon substrate. A regenerative amplified Ti:Al2O3 laser (E= 30˜500 μJ/pulse, τ= 200 fs, λ= 780 nm, f= 10 Hz) was used and focused onto a 50 μm-thick silicon sample. ICCD (Intensified Charge coupled Device) camera with a high-speed gate of 5 ns was utilized to take images of processing hole. First, we investigated the dependence of laser energy on the speed of the formation of the drilled hole. As a result, it was found that the lager the energy, the slower the speed of the formation under the minimum hole was obtained. Consequently, in the case of defocused condition, even when the smaller the energy density was used, the very slow speed of formation and the much lager thermal effects are simultaneously observed. So we can say that the degree of the thermal effects is not simply related to energy density of the laser but strongly related to the speed of the formation, which can be measured by the ICCD camera. The similar tendency was also obtained for other materials, which are important for the fabrication of ICs (Al, Cu, SiO2 and acrylic resin).

  17. Readability and quality assessment of internet-based patient education materials related to laryngeal cancer.

    Science.gov (United States)

    Narwani, Vishal; Nalamada, Keerthana; Lee, Michael; Kothari, Prasad; Lakhani, Raj

    2016-04-01

    Patients are increasingly using the internet to access health-related information. The purpose of this study was to assess the readability and quality of laryngeal cancer-related websites. Patient education materials were identified by performing an internet search using 3 search engines. Readability was assessed using Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), and Gunning Fog Index (GFI). The DISCERN instrument was utilized to assess quality of health information. A total of 54 websites were included in the analysis. The mean readability scores were as follows: FRES, 48.2 (95% confidence interval [CI] = 44.8-51.6); FKGL, 10.9 (95% CI = 10.3-11.5); and GFI, 13.8 (95% CI = 11.3-16.3). These scores suggest that, on average, online information about patients with laryngeal cancer is written at an advanced level. The mean DISCERN score was 49.8 (95% CI = 45.4-54.2), suggesting that online information is of variable quality. Our study suggests much of the laryngeal cancer information available online is of suboptimal quality and written at a level too difficult for the average adult to read comfortably. © 2015 Wiley Periodicals, Inc.

  18. Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity (journal)

    Science.gov (United States)

    The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50% and 70% RH). A dynamic dual-chamber test meth...

  19. Determination of partition and diffusion coefficient of formaldehyde in selected building materials and impact of relative humidity

    Science.gov (United States)

    The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50% and 70% RH). A dynamic dual-chamber test meth...

  20. Technical Progress Report for "Optical and Electrical Properties of III-Nitrides and Related Materials"

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Hongxing

    2008-10-31

    Investigations have been conducted focused on the fundamental material properties of AIN and high AI-content AIGaN alloys and further developed MOCVD growth technologies for obtaining these materials with improved crystalline quality and conductivities.

  1. Digital Materials - Evaluation of the Possibilities of using Selected Hyperelastic Models to Describe Constitutive Relations

    Science.gov (United States)

    Mańkowski, J.; Lipnicki, J.

    2017-08-01

    The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker's stability criterion was also examined. Fourteen different materials were analyzed.

  2. Digital Materials – Evaluation of the Possibilities of using Selected Hyperelastic Models to Describe Constitutive Relations

    Directory of Open Access Journals (Sweden)

    Mańkowski J.

    2017-08-01

    Full Text Available The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker’s stability criterion was also examined. Fourteen different materials were analyzed.

  3. Readability of internet-sourced patient education material related to “labour analgesia”

    Science.gov (United States)

    Boztas, Nilay; Omur, Dilek; Ozbılgın, Sule; Altuntas, Gözde; Piskin, Ersan; Ozkardesler, Sevda; Hanci, Volkan

    2017-01-01

    Abstract We evaluated the readability of Internet-sourced patient education materials (PEMs) related to “labour analgesia.” In addition to assessing the readability of websites, we aimed to compare commercial, personal, and academic websites. We used the most popular search engine (http://www.google.com) in our study. The first 100 websites in English that resulted from a search for the key words “labour analgesia” were scanned. Websites that were not in English, graphs, pictures, videos, tables, figures and list formats in the text, all punctuation, the number of words in the text is less than 100 words, feedback forms not related to education, (Uniform Resource Locator) URL websites, author information, references, legal disclaimers, and addresses and telephone numbers were excluded. The texts included in the study were assessed using the Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (FOG) readability formulae. The number of Latin words within the text was determined. Analysis of 300-word sections of the texts revealed that the mean FRES was 47.54 ± 12.54 (quite difficult), mean FKGL and SMOG were 11.92 ± 2.59 and 10.57 ± 1.88 years of education, respectively, and mean Gunning FOG was 14.71 ± 2.76 (very difficult). Within 300-word sections, the mean number of Latin words was identified as 16.56 ± 6.37. In our study, the readability level of Internet-sourced PEM related to “labour analgesia” was identified to be quite high indicating poor readability. PMID:29137057

  4. Readability of internet-sourced patient education material related to "labour analgesia".

    Science.gov (United States)

    Boztas, Nilay; Omur, Dilek; Ozbılgın, Sule; Altuntas, Gözde; Piskin, Ersan; Ozkardesler, Sevda; Hanci, Volkan

    2017-11-01

    We evaluated the readability of Internet-sourced patient education materials (PEMs) related to "labour analgesia." In addition to assessing the readability of websites, we aimed to compare commercial, personal, and academic websites.We used the most popular search engine (http://www.google.com) in our study. The first 100 websites in English that resulted from a search for the key words "labour analgesia" were scanned. Websites that were not in English, graphs, pictures, videos, tables, figures and list formats in the text, all punctuation, the number of words in the text is less than 100 words, feedback forms not related to education, (Uniform Resource Locator) URL websites, author information, references, legal disclaimers, and addresses and telephone numbers were excluded.The texts included in the study were assessed using the Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (FOG) readability formulae. The number of Latin words within the text was determined.Analysis of 300-word sections of the texts revealed that the mean FRES was 47.54 ± 12.54 (quite difficult), mean FKGL and SMOG were 11.92 ± 2.59 and 10.57 ± 1.88 years of education, respectively, and mean Gunning FOG was 14.71 ± 2.76 (very difficult). Within 300-word sections, the mean number of Latin words was identified as 16.56 ± 6.37.In our study, the readability level of Internet-sourced PEM related to "labour analgesia" was identified to be quite high indicating poor readability.

  5. Positron probing of electron momentum density in GaAs-AlAs superlattices and related materials

    International Nuclear Information System (INIS)

    Arutyunov, N.Y.; Sekkal, N.

    2008-08-01

    The band structure calculations based on the method proposed by Jaros et al. (Phys. Rev. B 31, 1205 (1985)) have been performed for the defect-free GaAs-AlAs superlattice and related AlAs and GaAs single crystals; the electron-positron momentum density distributions have been computed and analyzed. The results of calculations are in good agreement with the experimental data obtained ad hoc for GaAs and AlAs bulk materials by measuring the angular correlation of the annihilation radiation (ACAR). Small (but marked) features of the electron-positron momentum density of the valence band have been revealed both for constituent materials and GaAs-AlAs superlattice. The delocalization of positron in 'perfect' defect-'free' AlAs and GaAs single crystals to be observed experimentally is borne out by the results of pseudo-potential band calculations performed on the basis of method proposed by Sekkal et al. (Superlattices and Microstructures, 33, 63 (2003)). The prediction of the possibility of a certain confinement of positron in the interstitial area of GaAs- AlAs superlattice is confirmed by the agreement between the results of calculations and relevant experimental data obtained for GaAs and AlAs single crystals. No considerable effect of the enhancement of the annihilation rate (due to electron-positron interaction) upon the electron-positron momentum density distribution both in the superlattice and its constituent bulk materials has been found. The results of ACAR measurements and calculations performed suggest that a tangible improvement of the sensitivity of existing positron annihilation techniques is necessary for studying details of the electron-positron momentum density distributions in defect-'free' superlattices to be created on the basis of the diamond-like semiconductors possessing close values of the electron momentum densities. On the contrary, the positron-sensitive vacancy-type defects of various types in the superlattice may become a source of the

  6. New improved method for evaluation of growth by food related fungi on biologically derived materials

    DEFF Research Database (Denmark)

    Bergenholtz, Karina P.; Nielsen, Per Væggemose

    2002-01-01

    Biologically derived materials, obtained as commercial and raw materials (Polylactate (PLA), Polyhydroxybutyrate (PHB), potato, wheat and corn starch) were tested for their ability to support fungal growth using a modified ASTM G21-96 (American Society for Testing and Materials) standard as well...

  7. The separate and collective effects of personalization, personification, and gender on learning with multimedia chemistry instructional materials

    Science.gov (United States)

    Halkyard, Shannon

    Chemistry is a difficult subject to learn and teach for students in general. Additionally, female students are under-represented in chemistry and the physical sciences. Within chemistry, atomic and electronic structure is a key concept and several recommendations in the literature describe how this topic can be taught better. These recommendations can be employed in multimedia instructional materials designed following principles understood through the Cognitive Theory of Multimedia Learning. Additionally, these materials can expand the known use of principles like personalization (addressing the learner as "you") and test prospective design principles like personification (referring to abstract objects like atoms as "she" or "he"). The purpose of this study was to use the recommendations on teaching atomic and electronic structure along with known multimedia design principles to create multimedia chemistry learning materials that can be used to test the use of personalization and personification both separately and together. The study also investigated how learning with these materials might be different for male and female students. A sample of 329 students from private northern California high schools were given an atomic structure pre-test, watched a multimedia chemistry instructional video, and took a post-test on atomic structure. Students were randomly assigned to watch one of six versions of the instructional video. Students in the six groups were compared using ANOVA procedures and no significant differences were found. Males were compared to females for the six different treatment conditions and the most significant difference was for the treatment that combined personalization (you) and female personification (she), with a medium effect size (Cohen's d=0.65). Males and females were then compared separately across the six groups using ANOVA procedures and t-tests. A significant difference was found for female students using the treatment that combined

  8. Developing institutional repository at National Institute for Materials Science : Researchers directory service “SAMURAI” and Research Collection Library

    Science.gov (United States)

    Takaku, Masao; Tanifuji, Mikiko

    National Institute for Materials Science (NIMS) has developed an institutional repository “NIMS eSciDoc” since 2008. eSciDoc is an open source repository software made in Germany, and provides E-Science infrastructures through its flexible data model and rich Web APIs. NIMS eScidoc makes use of eSciDoc functions to benefit for NIMS situations. This article also focuses on researchers directory service “SAMURAI” in addition to NIMS eSciDoc. Successfully launched in October 2010, SAMURAI provides approximately 500 researchers' profile and publication information.

  9. Collection of Ni-bearing material from electroless plating waste by magnetic separation with HTS bulk magnet

    International Nuclear Information System (INIS)

    Oka, T.; Fukazawa, H.; Fukui, S.; Ogawa, J.; Sato, T.; Ooizumi, M.; Tsujimura, M.; Yokoyama, K.

    2014-01-01

    Highlights: ► The magnetic separation for Ni compounds was conducted by HTS bulk magnet. ► The coarse Ni-sulfate crystals were formed from the Ni-phosphite precipitates. ► Ni-sulfate crystals was separated from the mixture of Ni-sulfate and Ni-phosphite compounds. -- Abstract: The magnetic separation experiment to collect the Ni compounds from the waste liquid of electroless plating processes was conducted in the open-gradient magnetic separation process with the high temperature superconducting bulk magnet system. The magnetic pole containing Gd-based bulk superconductors was activated to 3.45 T at 35 K in the static magnetic field of 5 T with use of a superconducting solenoid magnet. The coarse Ni-sulfate crystals were formed by adding the concentrated sulfuric acid to the Ni-phosphite precipitates which yielded from the plating waste liquid by controlling the temperature and the pH value. The open-gradient magnetic separation technique was employed to separate the Ni-sulfate crystals from the mixture of the Ni-sulfate and Ni-phosphite compounds by the difference between their magnetic properties. And we succeeded in collecting Ni-sulfate crystals preferentially to the Ni-phosphite by attracting them to the magnetic pole soon after the Ni-sulfate crystals began to grow

  10. Collection of Ni-bearing material from electroless plating waste by magnetic separation with HTS bulk magnet

    Energy Technology Data Exchange (ETDEWEB)

    Oka, T., E-mail: okat@eng.niigata-u.ac.jp [Niigata University, 8050 Ikarashi-Ninocho, Nishi-ku, Niigata 950-2181 (Japan); Fukazawa, H.; Fukui, S.; Ogawa, J.; Sato, T.; Ooizumi, M. [Niigata University, 8050 Ikarashi-Ninocho, Nishi-ku, Niigata 950-2181 (Japan); Tsujimura, M. [Aichi Giken Co., 50-1 Takeshita, Hitotugi-cho, Kariya, Aichi 448-0003 (Japan); Yokoyama, K. [Ashikaga Institute of Technology, 268-1 Ohmae-cho, Ashikaga, Tochigi 326-8558 (Japan)

    2014-01-15

    Highlights: ► The magnetic separation for Ni compounds was conducted by HTS bulk magnet. ► The coarse Ni-sulfate crystals were formed from the Ni-phosphite precipitates. ► Ni-sulfate crystals was separated from the mixture of Ni-sulfate and Ni-phosphite compounds. -- Abstract: The magnetic separation experiment to collect the Ni compounds from the waste liquid of electroless plating processes was conducted in the open-gradient magnetic separation process with the high temperature superconducting bulk magnet system. The magnetic pole containing Gd-based bulk superconductors was activated to 3.45 T at 35 K in the static magnetic field of 5 T with use of a superconducting solenoid magnet. The coarse Ni-sulfate crystals were formed by adding the concentrated sulfuric acid to the Ni-phosphite precipitates which yielded from the plating waste liquid by controlling the temperature and the pH value. The open-gradient magnetic separation technique was employed to separate the Ni-sulfate crystals from the mixture of the Ni-sulfate and Ni-phosphite compounds by the difference between their magnetic properties. And we succeeded in collecting Ni-sulfate crystals preferentially to the Ni-phosphite by attracting them to the magnetic pole soon after the Ni-sulfate crystals began to grow.

  11. Collection of Ni-bearing material from electroless plating waste by magnetic separation with HTS bulk magnet

    Science.gov (United States)

    Oka, T.; Fukazawa, H.; Fukui, S.; Ogawa, J.; Sato, T.; Ooizumi, M.; Tsujimura, M.; Yokoyama, K.

    2014-01-01

    The magnetic separation experiment to collect the Ni compounds from the waste liquid of electroless plating processes was conducted in the open-gradient magnetic separation process with the high temperature superconducting bulk magnet system. The magnetic pole containing Gd-based bulk superconductors was activated to 3.45 T at 35 K in the static magnetic field of 5 T with use of a superconducting solenoid magnet. The coarse Ni-sulfate crystals were formed by adding the concentrated sulfuric acid to the Ni-phosphite precipitates which yielded from the plating waste liquid by controlling the temperature and the pH value. The open-gradient magnetic separation technique was employed to separate the Ni-sulfate crystals from the mixture of the Ni-sulfate and Ni-phosphite compounds by the difference between their magnetic properties. And we succeeded in collecting Ni-sulfate crystals preferentially to the Ni-phosphite by attracting them to the magnetic pole soon after the Ni-sulfate crystals began to grow.

  12. The position of IAEA safeguards relative to nuclear material control accountancy by States

    International Nuclear Information System (INIS)

    Rometsch, R.; Hough, G.

    1977-01-01

    IAEA Safeguards, which are always implemented on the basis of agreements which are concluded between one or more Governments and the IAEA, lay down the rights and obligations of the parties; and the more modern types of agreement, in particular those in connection with the Treaty on the Non-Proliferation of Nuclear Weapons, do this in quite some detail. Several articles, for instance, regulate the working relations between the States and the IAEA inspectorate. These are based on two basic obligations - that of the State to establish and maintain a ''System of Accountancy for and Control of Nuclear Material'' and that of the IAEA to ascertain the absence of diversion of nuclear material by verifying the findings of the States' systems, inter alia through independent measurements and observations. Other articles dealing also with the working relations between States and the IAEA rule that the IAEA should take due account of the technical effectiveness of the States' systems and mention among the criteria for determining the inspection effort, the extent of functional dependence of the State's accountancy on that of the facility operator. However, quantitative relationships in this respect are left to be worked out in practice. With the help of consultants and expert advisory groups a rationale has been developed and possible practical arrangements discussed with several States concerned. The rationale for co-ordinating the work of the States' inspectorate with that of the IAEA was to use a factor by which the significant quantity used for calculating verification sampling plans would be adjusted so as to reduce to a certain extent the IAEA's independent verification work in case the States would themselves do extensive verifications in a manner transparent to the IAEA. However, in practice it proved that there are a number of points in the fuel cycle where such adaptations would have little or no effect on the inspection effort necessary to achieve the safeguards

  13. The position of IAEA safeguards relative to nuclear material control accountancy by states

    International Nuclear Information System (INIS)

    Rometsch, R.; Hough, G.

    1977-01-01

    IAEA Safeguards are always implemented on the basis of agreements which are concluded between one or more Governments and the Agency. They lay down the rights and obligations of the parties; the more modern types of agreements, in particular those in connection with the Treaty on the Non-Proliferation of Nuclear Weapons, do that in quite some details. Several articles, for instance, regulate the working relations between the States and the IAEA inspectorate. Those are based on two basic obligations: that of the State to establish and maintain a ''System of Accountancy for and Control of Nuclear Material'' and that of the Agency to ascertain the absence of diversion of nuclear material by verifying the findings of the States' system, inter alia through independent measurements and observations. Other articles dealing also with the working relations States - IAEA rule that the Agency should take due account of the technical effectiveness of the States' system and mention among the criteria for determining the inspection effort, the extent of functional dependence of the State's accountancy from that of the facility operator. However, quantitative relationships in that respect are left to be worked out in practice. With the help of consultants and expert advisory groups a rational has been developed and possible practical arrangements discussed with several States concerned. The rational for coordinating the work of the States' inspectorate with IAEA's inspectorate was to use a factor by which the significant quantity used for calculating verification sampling plans would be adjusted in order to reduce to a certain extent the Agency's independent verification work in case the States would do extensive verifications themselves in a manner transparent to IAEA. However, in practice it proved that there are quite a number of points in the fuel cycle where such adaptations would have little or no effect on the inspection effort necessary to achieve the safeguards objective

  14. The Vapor Plume at Material Disposal Are C in Relation to Pajarito Corridor Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Masse, William B. [Los Alamos National Laboratory

    2012-04-02

    A vapor plume made up of volatile organic compounds is present beneath Material Disposal Area C (MDA C) at Los Alamos National Laboratory (LANL). The location and concentrations within the vapor plume are discussed in relation to existing and planned facilities and construction activities along Pajarito Road (the 'Pajarito Corridor') and in terms of worker health and safety. This document provides information that indicates that the vapor plume does not pose a threat to the health of LANL workers nor will it pose a threat to workers during construction of proposed facilities along Pajarito Road. The Los Alamos National Laboratory (LANL or the Laboratory) monitors emissions, effluents, and environmental media to meet environmental compliance requirements, determine actions to protect the environment, and monitor the long-term health of the local environment. LANL also studies and characterizes 'legacy' waste from past Laboratory operations to make informed decisions regarding eventual corrective actions and the disposition of that waste. Starting in 1969, these activities have been annually reported in the LANL Environmental Report (formerly Environmental Surveillance Report), and are detailed in publicly accessible technical reports meeting environmental compliance requirements. Included among the legacy sites being investigated are several formerly used material disposal areas (MDAs) set aside by the Laboratory for the general on-site disposal of waste from mission-related activities. One such area is MDA C located in Technical Area 50 (TA-50), which was used for waste disposal between 1948 and 1974. The location of TA-50 is depicted in Figure 1. The present paper uses a series of maps and cross sections to address the public concerns raised about the vapor plume at MDA C. As illustrated here, extensive sampling and data interpretation indicate that the vapor plume at MDA C does not pose a threat to the health of LANL workers nor will it pose a

  15. Advisory group meeting on safeguards related to final disposal of nuclear material in waste and spent fuel

    International Nuclear Information System (INIS)

    1988-07-01

    This paper is primarily concerned with Section 11 of INFCIRC/153 which provides for the possible termination of safeguards based on a determination that the nuclear material in question has been consumed, has been diluted, or has become practicably irrecoverable. Two distinctly different categories of nuclear material have been suggested for possible termination of safeguards based on a determination that the nuclear material has become practicably irrecoverable: One relates to a variety of low concentration waste materials, meaning thereby materials which the State or plant operator considers to be of questionable economic recoverability and the other relates to the spent fuel placed in facilities described as ''permanent repositories'' which are at least claimed to represent ''final disposal'' facilities and are candidates for a possible determination of practicably irrecoverable. 26 refs, tabs

  16. Improvements in or relating to method of preparing porous material/synthetic polymer composites

    International Nuclear Information System (INIS)

    Hills, P.R.; McGahan, D.J.

    1976-01-01

    A method for preparing a composite material is described comprising polymerising a monoethylenically unsaturated monomer of a mixture of copolymerisable monoethylenically unsaturated monomers in a porous material, excluding a porous natural cellulosic fibre material, the polymerisable liquid being admixed in the porous material with a saturated aliphatic hydrocarbon or a halogen derivative thereof. It is preferable that the polymerisable liquid and the hydrocarbon or halogen derivative are present in the porous material. Impregnation may be carried out by a vacuum technique or by simple immersion. The monomers that may be used are listed, but a mixture of styrene and acrylonitrile is preferred in the proportions 60 : 40 by volume. Polymerisation may be effected by irradiation, preferably with 60 Co γ-radiation. Suitable porous materials include concrete, stone, and fibreboard. If concrete is used the composite material may be used for pressure pipes and other articles normally made of steel. Examples of the application of the process are given. (U.K.)

  17. Scholars in International Relations Cite Books More Frequently than Journals: More Research is Needed to Better Understand Research Behaviour and Use. A Review of: Zhang, Li. ʺCitation Analysis for Collection Development: A Study of International Relations Journal Literature.ʺ Library Collections, Acquisitions, and Technical Services 31.3‐4 (2007: 195‐207.

    Directory of Open Access Journals (Sweden)

    Megan von Isenburg

    2009-09-01

    representing quantitative research were randomly selected from each of the three journals for each of the six years. Subsequently, five citations from each of the resulting pool of 72 articles were randomly selected to create a sample of 360 citations. These citations were analyzed by material type and age of source.Main Results – Analysis of the citation data showed that books (including monographs, edited books, book chapters and dictionaries made up 48.2% of the total citations; journals (including scholarly and non‐scholarly titles made up 38.4% of the citations; and government publications made up 4.5% of the citations. Electronic resources, which primarily refer to Web sites and digital collections in this study, represented 1.7% of the citations. Other sources of citations included magazines (1.1%, newspapers (1.1%, working papers (1.1%, theses (0.9%, conference papers not yet published as articles (0.6%, and a miscellaneous category, which included items such as committee minutes, radio broadcasts, unpublished materials and personal communications (2.5%. The average age of book citations was 14.3 years and the median age was 8 years. Foreign language citations represented 3.7% of the 651 total citations. The top ranked foreign languages were German (7, French (5, Russian (4, Spanish (3, Korean (2 and Swedish (number not given. Subject analysis of the citations revealed that 38% of all citations were from international relations and two related disciplines, political science, political theory, and public administration. Subject areas outside international relations included social sciences (23.4% ‐ including economics, commerce, industries and finance, history (16.3%, sociology (6.2%, and law (5.9%. Citations from philosophy, psychology, military science and general works together made up 7.3% of the total citations. Citations from science, linguistics, literature, geography and medicine made up less than 2% of the total.Authors of qualitative research articles

  18. Exploring a Tomato Landraces Collection for Fruit-Related Traits by the Aid of a High-Throughput Genomic Platform.

    Science.gov (United States)

    Sacco, Adriana; Ruggieri, Valentino; Parisi, Mario; Festa, Giovanna; Rigano, Maria Manuela; Picarella, Maurizio Enea; Mazzucato, Andrea; Barone, Amalia

    2015-01-01

    During its evolution and domestication Solanum lycopersicum has undergone various genetic 'bottlenecks' and extreme inbreeding of limited genotypes. In Europe the tomato found a secondary centre for diversification, which resulted in a wide array of fruit shape variation given rise to a range of landraces that have been cultivated for centuries. Landraces represent a reservoir of genetic diversity especially for traits such as abiotic stress resistance and high fruit quality. Information about the variation present among tomato landrace populations is still limited. A collection of 123 genotypes from different geographical areas was established with the aim of capturing a wide diversity. Eighteen morphological traits were evaluated, mainly related to the fruit. About 45% of morphological variation was attributed to fruit shape, as estimated by the principal component analysis, and the dendrogram of relatedness divided the population in subgroups mainly on the basis of fruit weight and locule number. Genotyping was carried out using the tomato array platform SolCAP able to interrogate 7,720 SNPs. In the whole collection 87.1% markers were polymorphic but they decreased to 44-54% when considering groups of genotypes with different origin. The neighbour-joining tree analysis clustered the 123 genotypes into two main branches. The STRUCTURE analysis with K = 3 also divided the population on the basis of fruit size. A genomic-wide association strategy revealed 36 novel markers associated to the variation of 15 traits. The markers were mapped on the tomato chromosomes together with 98 candidate genes for the traits analyzed. Six regions were evidenced in which candidate genes co-localized with 19 associated SNPs. In addition, 17 associated SNPs were localized in genomic regions lacking candidate genes. The identification of these markers demonstrated that novel variability was captured in our germoplasm collection. They might also provide a viable indirect selection tool

  19. Exploring a Tomato Landraces Collection for Fruit-Related Traits by the Aid of a High-Throughput Genomic Platform.

    Directory of Open Access Journals (Sweden)

    Adriana Sacco

    Full Text Available During its evolution and domestication Solanum lycopersicum has undergone various genetic 'bottlenecks' and extreme inbreeding of limited genotypes. In Europe the tomato found a secondary centre for diversification, which resulted in a wide array of fruit shape variation given rise to a range of landraces that have been cultivated for centuries. Landraces represent a reservoir of genetic diversity especially for traits such as abiotic stress resistance and high fruit quality. Information about the variation present among tomato landrace populations is still limited. A collection of 123 genotypes from different geographical areas was established with the aim of capturing a wide diversity. Eighteen morphological traits were evaluated, mainly related to the fruit. About 45% of morphological variation was attributed to fruit shape, as estimated by the principal component analysis, and the dendrogram of relatedness divided the population in subgroups mainly on the basis of fruit weight and locule number. Genotyping was carried out using the tomato array platform SolCAP able to interrogate 7,720 SNPs. In the whole collection 87.1% markers were polymorphic but they decreased to 44-54% when considering groups of genotypes with different origin. The neighbour-joining tree analysis clustered the 123 genotypes into two main branches. The STRUCTURE analysis with K = 3 also divided the population on the basis of fruit size. A genomic-wide association strategy revealed 36 novel markers associated to the variation of 15 traits. The markers were mapped on the tomato chromosomes together with 98 candidate genes for the traits analyzed. Six regions were evidenced in which candidate genes co-localized with 19 associated SNPs. In addition, 17 associated SNPs were localized in genomic regions lacking candidate genes. The identification of these markers demonstrated that novel variability was captured in our germoplasm collection. They might also provide a viable

  20. Effect of Relative Humidity and CO2 Concentration on the Properties of Carbonated Reactive MgO Cement Based Materials

    Science.gov (United States)

    Bilan, Yaroslav

    Sustainability of modern concrete industry recently has become an important topic of scientific discussion, and consequently there is an effort to study the potential of the emerging new supplementary cementitious materials. This study has a purpose to investigate the effect of reactive magnesia (reactive MgO) as a replacement for general use (GU) Portland Cements and the effect of environmental factors (CO2 concentrations and relative humidity) on accelerated carbonation curing results. The findings of this study revealed that improvement of physical properties is related directly to the increase in CO2 concentrations and inversely to the increase in relative humidity and also depends much on %MgO in the mixture. The conclusions of this study helped to clarify the effect of variable environmental factors and the material replacement range on carbonation of reactive magnesia concrete materials, as well as providing an assessment of the optimal conditions for the effective usage of the material.

  1. Readability assessment of internet-based patient education materials related to mammography for breast cancer screening.

    Science.gov (United States)

    AlKhalili, Rend; Shukla, Pratik A; Patel, Ronak H; Sanghvi, Saurin; Hubbi, Basil

    2015-03-01

    The US Department of Health and Human Services (USDHHS) recommends that Internet-based patient education materials (IPEMs) be written below the sixth-grade reading level to target the average American adult. This study was designed to determine the readability of IPEMs regarding mammography for breast cancer screening. Three-hundred mammography-related Web sites were reviewed for IPEMs. Forty-two IPEMs that met the Health on the Net Foundation Code of Conduct were assessed for readability level with four readability indices that use existing algorithms based on word and sentence length to quantitatively analyze Internet sources for language intricacy including the following: Flesch-Kincaid Grade Level (FKGL), Flesch Reading Ease Score (FRES), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (Gunning FOG; GFOG). Results were compared to national recommendations, and intergroup analysis was performed. No IPEMs (0%) regarding mammography were written at or below the sixth-grade reading level, based on FKGL. The mean readability scores were as follows: FRES, 49.04 ± 10.62; FKGL, 10.71 ± 2.01; SMOG, 13.33 ± 1.67; and Gunning FOG, 14.32 ± 2.18. These scores indicate that the readability of mammography IPEMs is written at a "difficult" level, significantly above the recommended sixth-grade reading level (P < .05) determined by the USDHHS. IPEMs related to mammography are written well above the recommended sixth-grade level and likely reflect other IPEMs in diagnostic radiology. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  2. Review of the IAEA Nuclear Fuel Cycle Materials Section activities related to WWER fuel

    International Nuclear Information System (INIS)

    Killeen, J.

    2003-01-01

    The IAEA Nuclear Fuel Cycle Programme, designated as Programme B, has the main objective of supporting Member States in policy making, strategic planning, developing technology and addressing issues with respect to safe, reliable, economically efficient, proliferation resistant and environmentally sound nuclear fuel cycle. This paper is concentrated on describing the work within Sub-programme B.2 'Fuel Performance and Technology'. Two Technical Working Groups assist in the preparation of the IAEA programme in the nuclear fuel cycle area - Technical Working Group on Water Reactor Fuel Performance and Technology and Technical Working Group on Nuclear Fuel Cycle Options. The activities of the Unit within the Nuclear Fuel Cycle and Materials Section working on Fuel Performance and Technology are given, based on the sub-programme structure of the Agency programme and budget for 2002-2003. Within the framework of Co-ordinated Research Projects a study of the delayed hydride cracking (DHC) of the zirconium alloys used in pressurised heavy water reactors (PHWR) involving 10 countries has been completed. It achieved very effective transfer of know-how at the laboratory level in three technologically important areas: 1) Controlled hydriding of samples to predetermined levels; 2) Accurate measurement of hydrogen concentrations at the relatively low levels found in pressure tubes and RBMK channel tubes; and 3) In the determination of DHC rates under various conditions of temperature and stress. A new project has been started on the 'Improvement of Models used for Fuel Behaviour Simulation' (FUMEX II) to assist Member States in improving the predictive capabilities of computer codes used in modelling fuel behaviour for extended burnup. The IAEA also collaborates with organisations in the Member States to support activities and meetings on nuclear fuel cycle related topics

  3. Technical Meeting on Fast Reactors and Related Fuel Cycle Facilities with Improved Economic Characteristics. Working Material

    International Nuclear Information System (INIS)

    2013-01-01

    In recent years, engineering oriented work, rather than basic research and development (R&D), has led to significant progress in improving the economics of innovative fast reactors and associated fuel cycle facilities, while maintaining and even enhancing the safety features of these systems. Optimization of plant size and layout, more compact designs, reduction of the amount of plant materials and the building volumes, higher operating temperatures to attain higher generating efficiencies, improvement of load factor, extended core lifetimes, high fuel burnup, etc. are good examples of achievements to date that have improved the economics of fast neutron systems. The IAEA, through its Technical Working Group on Fast Reactors (TWG-FR) and Technical Working Group on Nuclear Fuel Cycle Options and Spent Fuel Management (TWG-NFCO), devotes many of its initiatives to encouraging technical cooperation and promoting common research and technology development projects among Member States with fast reactor and advanced fuel cycle development programmes, with the general aim of catalysing and accelerating technology advances in these fields. In particular the theme of fast reactor deployment, scenarios and economics has been largely debated during the recent IAEA International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios, held in Paris in March 2013. Several papers presented at this conference discussed the economics of fast reactors from different national and regional perspectives, including business cases, investment scenarios, funding mechanisms and design options that offer significant capital and energy production cost reductions. This Technical Meeting on Fast Reactors and Related Fuel Cycle Facilities with Improved Economic Characteristics addresses Member States’ expressed need for information exchange in the field, with the aim of identifying the main open issues and launching possible initiatives to help and

  4. Biological availability of energy related effluent material in the coastal ecosystem

    International Nuclear Information System (INIS)

    Gibson, C.I.; Abel, K.H.; Ahlstrom, S.W.; Crecelius, E.A.; Schmidt, R.L.; Thatcher, T.O.; Wildung, R.E.

    1977-01-01

    In order to make the predictions necessary to forecast the ecological consequences of an energy-related technology, there must be an understanding of: the biogeochemical processes involved in the natural system; the manner in which an energy technology affects these processes and how, in turn, this affects the ecosystem as a whole. Direct biological effects such as lethality, behavioral changes, and physiological changes, are being studied under the program previously discussed. The biological availability and impact studies are investigating: the chemical, physical, and biological processes that occur in the natural marine ecosystem; how energy effluents affect these processes; and the factors involved in regulating the bioavailability of effluent material. This past year's effort has centered on defining the quantities and forms of metals and radioisotopes in nuclear power plant effluent streams, the chemical forms present in bioassay systems, the chemical and microbial processes controlling the forms of metals available from the sediments, and the uptake and control of copper in shrimp. In addition, several sites in Sequim Bay have been monitored for potential use in field verification studies

  5. Determination of collected quantities of wild strawbery, bluberry and juniper in Serbia in relation to different scenarios of climate change

    Directory of Open Access Journals (Sweden)

    Ranković Nenad

    2017-01-01

    Full Text Available This study examines the influence of some climate elements on the collected quantities of blueberry, wild strawberry and juniper in Serbia. The main objective of the research is to predict the quantity of selected forest fruits depending on the different climate change scenarios (A1Bmin, A1Bmax, A2min and A2max. The general (modeling method, basic (dialectical and specific scientific methods (induction and deduction, analysis and synthesis, abstraction and concretization were used. Regression models were used in data processing, where the focus was on the statistical significance of the correlation coefficient in relation to the statistical significance of the parameters. The research found that, in the coming period, with the increase in temperature and precipitation, an increase in the collected amount of wild strawberries and blueberries could be expected, and the decline of juniper. Longer-term forecasts indicate expected growth with wild strawberries and blueberries with a tendency to slow down after 2040, and expected decline with juniper, with the same slow down tendency after 2040. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 43007Studies of climate changes and their impact on the environment - monitoring impacts, adaptation and mitigation, sub-project No. 43007/16-III: Socio-economic development, mitigation and adaptation to climate change

  6. Radiation sensitive devices and systems for detection of radioactive materials and related methods

    Science.gov (United States)

    Kotter, Dale K

    2014-12-02

    Radiation sensitive devices include a substrate comprising a radiation sensitive material and a plurality of resonance elements coupled to the substrate. Each resonance element is configured to resonate responsive to non-ionizing incident radiation. Systems for detecting radiation from a special nuclear material include a radiation sensitive device and a sensor located remotely from the radiation sensitive device and configured to measure an output signal from the radiation sensitive device. In such systems, the radiation sensitive device includes a radiation sensitive material and a plurality of resonance elements positioned on the radiation sensitive material. Methods for detecting a presence of a special nuclear material include positioning a radiation sensitive device in a location where special nuclear materials are to be detected and remotely interrogating the radiation sensitive device with a sensor.

  7. Implementation of Cavity Perturbation Method for Determining Relative Permittivity of Non Magnetic Materials

    Directory of Open Access Journals (Sweden)

    FAHIM GOHARAWAN

    2017-04-01

    Full Text Available Techniques for the cavity measurement of the electrical characteristics of the materials are well established using the approximate method due to its simplicity in material insertion and fabrication. However, the exact method which requires more comprehensive mathematical analysis as well, owing to the practical difficulties for the material insertion, is not mostly used while performing the measurements as compared to approximate method in most of the works. In this work the comparative analysis of both the approximate as well as Exact method is performed and accuracy of the Exact method is established by performing the measurements of non-magnetic material Teflon within the cavity.

  8. Implementation of cavity perturbation method for determining relative permittivity of non magnetic materials

    International Nuclear Information System (INIS)

    Awan, F.G.; Sheikh, N.A.; Qureshi, S.A.; Sheikh, N.M.

    2017-01-01

    Techniques for the cavity measurement of the electrical characteristics of the materials are well established using the approximate method due to its simplicity in material insertion and fabrication. However, the exact method which requires more comprehensive mathematical analysis as well, owing to the practical difficulties for the material insertion, is not mostly used while performing the measurements as compared to approximate method in most of the works. In this work the comparative analysis of both the approximate as well as Exact method is performed and accuracy of the Exact method is established by performing the measurements of non-magnetic material Teflon within the cavity. (author)

  9. Synthesis and characterization of nanometer sized thermoelectric lead-antimony-silver-tellurium compounds and related materials

    International Nuclear Information System (INIS)

    Petri, Denis

    2012-01-01

    The present dissertation deals with different variants of synthesis and processing of nanocrystalline composites of various thermoelectric compounds based on lead telluride including LAST-m (AgPb m SbTe m+2 ), LASTT-m-x (AgPb m-x Sn x SbTe m+2 ), LABST-m-x (AgPb m Sb 1-x Bi x Te m+2 ), doped LAST-m and (PbTe) m (M 15 2 Te 3 ) and the characterization thereof. A new route of manufacturing nanocrystalline composites was developed. The so called co-ball milling-route includes the synthesis of bi- or multinary compounds by conventional solid state melting methods followed by combined milling of appropriate amounts in a planetary ball mill; a process related to the widely used mechanical alloying of elemental powders. The as produced powders were shortly annealed for one hour and a.erwards compacted either at room temperature followed by pressureless sintering or combined application of high pressure and elevated temperatures via spark-plasma-sintering or short-term-sintering. The ball milling yielded micron-sized agglomerates consisting of crystallites with diameters ranging from 10 to 50 nm. These crystallites exhibited complicated internal nanostructures severe crystal defects as a consequence of the high energy processing. During short-term annealing some grain coarsening occured and the crystal defects partly healed, which was confirmed by TEM and HRTEM investigations as well as profile analysis of XRD powder pattern. Local EDX-analysis showed different compositions at every point as a consequence of synthesis and decomposition of the compounds. Measurements of thermopower, electrical and thermal conductivity were carried out and the values of the figure of merit ZT and the powerfactor were calculated. In general the compounds exhibited larger thermopower than corresponding bulk materials, which might be attributed to energy filtering of charge carriers at partly oxidized grain boundaries. Due to enhanced phonon scattering at grain boundarys, nanoscopic

  10. Microparticles and human health: particulate materials, trace metals elements and black carbon in aerosols collected at Andravoahangy-Antananarivo, Madagascar

    International Nuclear Information System (INIS)

    Rasoazanany, E. O.; Andriamahenina, N. N.; Harinoely, M.; Ravoson, H. N.; Randriamanivo, L. V.; Raoelina Andriambololona; Ramaherison, H.

    2013-01-01

    The present work is to determine the concentrations of microparticles having diameter inferior to 10 μm (PM 10 ), the metal trace elements and the black carbon in the aerosols sampled in Andravoahangy-Antananarivo, Madagascar in 2008. The air sampler GENT is used to collect aerosol samples. The total reflection X-ray fluorescence spectrometer is used for qualitative and quantitative analysis of simultaneous way all metallic trace elements contained in the aerosols. The M43D reflectometer permits to measure the reflectances in order to determine the black carbon concentrations. The results show that the average concentrations of the particulate matters PM 2,5-10 are higher than those of PM 2,5 . The average concentrations of PM 10 in the aerosols are exceeding the World Health Organisation (WHO) and European Union guidelines, set at 50 μg.m -3 and those of PM 2,5 are higher than the 2005 WHO (25 μg.m-3) and the United States Environment Protection Agency (35 μg.m -3 ) guidelines. Consequently, air quality in Andravoahangy does not respect these daily guidelines. The identified metallic trace elements in the aerosols are Ti, Cr, Mn, Fe, Ni, Cu, Zn and Pb. The average concentrations of these elements are also higher in the coarse particles than in the fine particles. The concentrations of black carbon are higher in the fine particles. The maximum value is 9.12 μg.m -3 . [fr

  11. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    International Nuclear Information System (INIS)

    2003-01-01

    The Director General of the International Atomic Energy Agency has received Notes Verbales dated 28 February 2003 from the Resident Representatives to the Agency of Argentina, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Japan, Kazakhstan, Latvia, Netherlands, Norway, Portugal, Republic of Korea, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland, and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Note Verbales is to provide further information on those Governments' Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full

  12. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    International Nuclear Information System (INIS)

    2005-01-01

    The Director General of the International Atomic Energy Agency has received Notes Verbales dated 25 October 2004 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Canada, Cyprus, Czech Republic, Estonia, Finland, France, Greece, Hungary, Italy, Japan, Malta, Netherlands, Norway, Republic of Korea, South Africa, Spain, Sweden, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Notes Verbales is to provide further information on those Governments' guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full

  13. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-16

    The Director General of the International Atomic Energy Agency has received Notes Verbales dated 28 February 2003 from the Resident Representatives to the Agency of Argentina, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Japan, Kazakhstan, Latvia, Netherlands, Norway, Portugal, Republic of Korea, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland, and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Note Verbales is to provide further information on those Governments' Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full.

  14. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-23

    The Director General of the International Atomic Energy Agency has received Notes Verbales dated 25 October 2004 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Canada, Cyprus, Czech Republic, Estonia, Finland, France, Greece, Hungary, Italy, Japan, Malta, Netherlands, Norway, Republic of Korea, South Africa, Spain, Sweden, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology. The purpose of the Notes Verbales is to provide further information on those Governments' guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbales is attached. The attachment to these Notes Verbales is also reproduced in full.

  15. 2nd IAEA research coordination meeting on collection and evaluation of reference data for thermo-mechanical properties of fusion reactor plasma facing materials. Summary report

    International Nuclear Information System (INIS)

    Langley, R.A.

    1996-08-01

    The proceedings and results of the 2nd IAEA Research Coordination Meeting on ''Collection and Evaluation of Reference Data for Thermo-mechanical Properties of Fusion Reactor Plasma Facing Materials'' held on March 25, 26 and 27, 1996 at the IAEA Headquarters in Vienna are briefly described. This report includes a summary of presentations made by the meeting participants, the results of discussions amongst the participants regarding the status of data, publication of a multi-author review paper and recommendations regarding future work. (author). 1 tab

  16. Framework for Reducing Teaching Challenges Relating to Improvisation of Science Education Equipment and Materials in Schools

    Science.gov (United States)

    Akuma, Fru Vitalis; Callaghan, Ronel

    2016-01-01

    The science education budget of many secondary schools has decreased, while shortages and environmental concerns linked to conventional Science Education Equipment and Materials (SEEMs) have emerged. Thus, in some schools, resourceful educators produce low-cost equipment from basic materials and use these so-called improvised SEEMs in practical…

  17. Fragile differences, relational effects: stories about the materiality of race and sex

    NARCIS (Netherlands)

    M'charek, A.

    2010-01-01

    This article is about the materiality of difference, about race, sex and sexual differences among others. To find out about these differences and their materialities, this article looks not into bodies but rather at how bodies are positioned in spaces and how they are enacted in practice. In the

  18. 75 FR 69138 - Environmental Assessment and Finding of No Significant Impact Related to Exemption of Material...

    Science.gov (United States)

    2010-11-10

    ... Installation was completed, and the decontamination and dismantlement phase of HBPP Unit 3 decommissioning..., building materials, and soil debris from Unit 3. The waste would be transported by truck from HBPP in... concrete, steel, insulation, roofing material, gravel and other metal, wood and soil debris generated...

  19. Rehabilitation materials from surface- coal mines in western U.S.A. III. Relations between elements in mine soil and uptake by plants.

    Science.gov (United States)

    Severson, R.C.; Gough, L.P.

    1984-01-01

    Plant uptake of Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn from mine soils was assessed using alfalfa Medicago sativa, sainfoin Onobrychis viciaefolia, smooth brome Bromus inermis, crested wheatgrass Agropyron cristatum, slender wheatgrass A. trachycaulum and intermediate wheatgrass A. intermedium; mine soil (cover-soil and spoil material) samples were collected from rehabilitated areas of 11 western US surface-coal mines in North Dakota, Montana, Wyoming and Colorado. Correlations between metals in plants and DTPA-extractable metals from mine soils were generally not statistically significant and showed no consistent patterns for a single metal or for a single plant species. Metal uptake by plants, relative to amounts in DTPA extracts of mine soil, was positively related to mine soil organic matter content or negatively related to mine soil pH. DTPA-extractable metal levels were significantly correlated with mine soil pH and organic-matter content.-from Authors

  20. Materials problems related to the core catcher of sodium cooled reactors

    International Nuclear Information System (INIS)

    Goetzmann, O.

    1975-05-01

    There are in principal two possible solutions for the external core catcher as far as materials are concerned. 1) A barrier consisting of a material with a high melting point, 2) a tray of comparatively low melting material with a high solubility for the fuel. In case of the first concept one has to look for materials whose melting temperatures are above the temperature of the molten core. Based on metallurgical reasons it seems very likely that the molten core does not exceed a temperature in the range between 2,500 and 2,800 0 C. Due to the compatibility situation with the molten core only a few high melting oxides will be suitable as liner materials for a core catcher. In the second case basalt or concrete, if free of water and lime, are suitable materials. Graphite is a high melting material, however, due to its behaviour with the molten core it should be listed under the second group. By the reaction of graphite with the core materials the melt can be kept liquid down to temperatures of around 1,100 0 C. The evolution of CO by this reaction should be supportable. It is an endothermal reaction. Experiments on the behaviour of core catcher materials have shown that sodium is capable of penetrating into sintered bodies of UO 2 with densities of 90% TD at temperatures higher than 200 0 C. This may lead to the desintegration of these bodies. The exposure to moist air has not done much harm to UO 2 pellets of densities from 80 to 90% TD. Even after one year of exposure, swelling or desintegration could not be observed. Sodium is also capable of penetrating into bodies of synthetic carbon and graphite. Only well graphitized material will not be destroyed. (orig.) [de

  1. Metal-insulator transition and superconductivity in heavily boron-doped diamond and related materials

    Energy Technology Data Exchange (ETDEWEB)

    Achatz, Philipp

    2009-05-15

    During this PhD project, the metal-insulator transition and superconductivity of highly boron-doped single crystal diamond and related materials have been investigated. The critical boron concentration n{sub c} for the metal-insulator transition was found to be the same as for the normal-superconductor transition. All metallic samples have been found to be superconducting and we were able to link the occurence of superconductivity to the proximity to the metal-insulator transition. For this purpose, a scaling law approach based on low temperature transport was proposed. Furthermore, we tried to study the nature of the superconductivity in highly boron doped single crystal diamond. Raman spectroscopy measurements on the isotopically substituted series suggest that the feature occuring at low wavenumbers ({approx} 500 cm{sup -1}) is the A1g vibrational mode associated with boron dimers. Usual Hall effect measurements yielded a puzzling situation in metallic boron-doped diamond samples, leading to carrier concentrations up to a factor 10 higher than the boron concentration determined by secondary ion mass spectroscopy (SIMS). The low temperature transport follows the one expected for a granular metal or insulator, depending on the interplay of intergranular and intragranular (tunneling) conductance. The metal-insulator transition takes place at a critical conductance g{sub c}. The granularity also influences significantly the superconducting properties by introducing the superconducting gap {delta} in the grain and Josephson coupling J between superconducting grains. A peak in magnetoresistance is observed which can be explained by superconducting fluctuations and the granularity of the system. Additionally we studied the low temperature transport of boron-doped Si samples grown by gas immersion laser doping, some of which yielded a superconducting transition at very low temperatures. Furthermore, preliminary results on the LO-phonon-plasmon coupling are shown for the

  2. Metal-insulator transition and superconductivity in heavily boron-doped diamond and related materials

    International Nuclear Information System (INIS)

    Achatz, Philipp

    2009-01-01

    During this PhD project, the metal-insulator transition and superconductivity of highly boron-doped single crystal diamond and related materials have been investigated. The critical boron concentration n c for the metal-insulator transition was found to be the same as for the normal-superconductor transition. All metallic samples have been found to be superconducting and we were able to link the occurence of superconductivity to the proximity to the metal-insulator transition. For this purpose, a scaling law approach based on low temperature transport was proposed. Furthermore, we tried to study the nature of the superconductivity in highly boron doped single crystal diamond. Raman spectroscopy measurements on the isotopically substituted series suggest that the feature occuring at low wavenumbers (∼ 500 cm -1 ) is the A1g vibrational mode associated with boron dimers. Usual Hall effect measurements yielded a puzzling situation in metallic boron-doped diamond samples, leading to carrier concentrations up to a factor 10 higher than the boron concentration determined by secondary ion mass spectroscopy (SIMS). The low temperature transport follows the one expected for a granular metal or insulator, depending on the interplay of intergranular and intragranular (tunneling) conductance. The metal-insulator transition takes place at a critical conductance g c . The granularity also influences significantly the superconducting properties by introducing the superconducting gap Δ in the grain and Josephson coupling J between superconducting grains. A peak in magnetoresistance is observed which can be explained by superconducting fluctuations and the granularity of the system. Additionally we studied the low temperature transport of boron-doped Si samples grown by gas immersion laser doping, some of which yielded a superconducting transition at very low temperatures. Furthermore, preliminary results on the LO-phonon-plasmon coupling are shown for the first time in aluminum

  3. Stability of concentration-related self-interstitial atoms in fusion material tungsten

    Science.gov (United States)

    Hong, Zhang; Shu-Long, Wen; Min, Pan; Zheng, Huang; Yong, Zhao; Xiang, Liu; Ji-Ming, Chen

    2016-05-01

    Based on the density functional theory, we calculated the structures of the two main possible self-interstitial atoms (SIAs) as well as the migration energy of tungsten (W) atoms. It was found that the difference of the and formation energies is 0.05-0.3 eV. Further analysis indicated that the stability of SIAs is closely related to the concentration of the defect. When the concentration of the point defect is high, SIAs are more likely to exist, SIAs are the opposite. In addition, the vacancy migration probability and self-recovery zones for these SIAs were researched by making a detailed comparison. The calculation provided a new viewpoint about the stability of point defects for self-interstitial configurations and would benefit the understanding of the control mechanism of defect behavior for this novel fusion material. Project supported by the Fundamental Research Funds for the Central Universities of Ministry of Education of China (Grant Nos. A0920502051411-5 and 2682014ZT30), the Program of International Science and Technology Cooperation, China (Grant No. 2013DFA51050), the National Magnetic Confinement Fusion Science Program, China (Grant Nos. 2011GB112001 and 2013GB110001), the National High Technology Research and Development Program of China (Grant No. 2014AA032701), the National Natural Science Foundation of China (Grant No. 11405138), the Southwestern Institute of Physics Funds, China, the Western Superconducting Technologies Company Limited, China, the Qingmiao Plan of Southwest Jiaotong University, China (Grant No. A0920502051517-6), and the China Postdoctoral Science Foundation (Grant No. 2014M560813).

  4. The Relative Patient Costs and Availability of Dental Services, Materials and Equipment in Public Oral Care Facilities in Tanzania.

    OpenAIRE

    Nyamuryekung'e, Kasusu K; Lahti, Satu M; Tuominen, Risto J

    2015-01-01

    Background Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. Methods A survey of all dis...

  5. Optical properties of copper-oxygen planes in superconducting oxides and related materials

    International Nuclear Information System (INIS)

    Kelly, M.K.; Barboux, P.; Tarascon, J.; Aspnes, D.E.

    1989-01-01

    The optical spectra of YBa 2 Cu 3 O 7-x and other Cu-O-based superconductors have several common features in the visible and near uv. Chemical changes that affect the conductivity of these materials also have a strong effect on some of these features. By comparing the spectra of many materials containing similar Cu-O structures, we have determined that some of the optical features are associated with specific local structures within the unit cell. Of particular interest is a sharp feature at 1.7 eV that appears for nonmetallic compositions of many of the materials and is removed by the introduction of carriers. Similar features in materials not yet showing superconductivity encourage further investigation of them

  6. The inversion of relative shear rigidity in different material classes at megabar pressures

    CERN Document Server

    Brazhkin, V V

    2002-01-01

    The behaviour of elastic moduli of substances is analysed in the megabar pressure range. A new effect - inversion of the shear moduli and mechanical properties upon compression - is predicted for various classes of substances. The melting-curve data for different materials confirm the predicted phenomenon. The materials traditionally considered the softest, such as rare-gas solids and molecular substances, may become the hardest in the megabar range. This should be taken into account in developing experimental high-pressure techniques.

  7. NA Departmental Activities Related to Nuclear Materials for Advanced Reactor Systems

    International Nuclear Information System (INIS)

    Zeman, Andrej

    2013-01-01

    Overview of completed and ongoing coordinated research projects which address the following issues: (1) Better understanding of radiation effects and mechanisms of material damage and basic physics of accelerator irradiation under specific conditions, (2) Improvement of knowledge and data for the present and new generation of structural materials, (3) Contribution to developmental of theoretical models for radiation degradation mechanism, (4) Fostering of advanced and innovative technologies by support of Round Robin testing, collaboration and networking

  8. Neutron imaging methods for the investigation of energy related materials. Fuel cells, battery, hydrogen storage and nuclear fuel

    Science.gov (United States)

    Lehmann, Eberhard H.; Boillat, Pierre; Kaestner, Anders; Vontobel, Peter; Mannes, David

    2015-10-01

    After a short explanation of the state-of-the-art in the field of neutron imaging we give some examples how energy related materials can be studied successfully. These are in particular fuel cell studies, battery research approaches, the storage of hydrogen, but also some investigations with nuclear fuel components. The high contrast for light isotopes like H-1, Li-6 or B-10 are used to trace low amounts of material even within compact sealing of metals which are relatively transparent for neutrons at the same time.

  9. Relation of historical quarrying, material utilization and performance on buildings in Eastern Finland

    Science.gov (United States)

    Luodes, Nike M.; Pirinen, Heikki

    2016-04-01

    Finland might seem to have lower stone heritage compared to other southern European countries, but it has been the main exporter of dimension stone to the majestic buildings that made St.Petersburg a recognized cultural heritage. In Finland, though, the stone seems undervalued. The only dramatic and predominant stone buildings are those of agencies and administrations located in the towns, where the stone has been used to impress and symbolize value. Romantic style used massive bossy stone in building's full height and created fine traditional carvings. Otherwise the communities have mainly built settlements in contact with the nature, with materials easily available and of low cost, following architectonical trends of the periods and producing interesting stone details. During the past years, research has been conducted on historical buildings interconnecting scientific and artistic approach to evaluate material durability and cultural relevance of the artifacts. Generally until mid 20th century the stone has been traditionally used massive for basements and walls. The materials still present good mechanical characteristics and most often the weathering level after hundreds of years of exposure had reached only the first millimeters from the curst. Instead the old methodology for deposit exploitation has left visible signs on the buildings. Some examples are visible from Kuopio. The exploitation of small, easy-to-reach surface deposits, even if planned by local experts, has affected quality and appearance of historical buildings. As an example the excavation of shallow quarries where also weathered crop was kept as a product has characterized the basement of the Niirala school that presents change in colors due to original material more than to weathering on site. Fissuring is also visible on a couple of blocks while marks on the rocks depict the old excavation method. Most often the deposits had been in the vicinities, frequently hidden by further construction

  10. The Study about the Influence of the Pop Culture for the Japanese Fashion : The Historical Materials Collection about the Connection of Japanese Fashion and Pop Cultures after World War II

    OpenAIRE

    田中, 里尚; 中村, 仁; 梅原, 宏司; 齋木, 吉隆; 古賀, 令子

    2010-01-01

    The purpose of this research collect and arrange documents and historical materials to determine how pop culture influenced the fashion in Japan after World War II. In 2010, we firstly collected previous fashion and popular culture studies done in foreign countries. We found many intriguing studies, but we came upon one which was particularly noteworthy. As a means of clarifying the relationship between fashion and pop culture, we collected books written by Angela McRobbie. Second, we collect...

  11. Assessing the fracture strength of geological and related materials via an atomistically based J-integral

    Science.gov (United States)

    Jones, R. E.; Criscenti, L. J.; Rimsza, J.

    2016-12-01

    Predicting fracture initiation and propagation in low-permeability geomaterials is a critical yet un- solved problem crucial to assessing shale caprocks at carbon dioxide sequestration sites, and controlling fracturing for gas and oil extraction. Experiments indicate that chemical reactions at fluid-geomaterial interfaces play a major role in subcritical crack growth by weakening the material and altering crack nu- cleation and growth rates. Engineering the subsurface fracture environment, however, has been hindered by a lack of understanding of the mechanisms relating chemical environment to mechanical outcome, and a lack of capability directly linking atomistic insight to macroscale observables. We have developed a fundamental atomic-level understanding of the chemical-mechanical mecha- nisms that control subcritical cracks through coarse-graining data from reactive molecular simulations. Previous studies of fracture at the atomic level have typically been limited to producing stress-strain curves, quantifying either the system-level stress or energy at which fracture propagation occurs. As such, these curves are neither characteristic of nor insightful regarding fracture features local to the crack tip. In contrast, configurational forces, such as the J-integral, are specific to the crack in that they measure the energy available to move the crack and truly quantify fracture resistance. By development and use of field estimators consistent with the continuum conservation properties we are able to connect the data produced by atomistic simulation to the continuum-level theory of fracture mechanics and thus inform engineering decisions. In order to trust this connection we have performed theoretical consistency tests and validation with experimental data. Although we have targeted geomaterials, this capability can have direct impact on other unsolved technological problems such as predicting the corrosion and embrittlement of metals and ceramics. Sandia National

  12. PREFACE Surface Modifications of Diamond and Related Materials (Session D, E-MRS Spring Meeting)

    Science.gov (United States)

    Nebel, Christoph E.

    2010-11-01

    This special issue contains selected papers which were presented at the E-MRS Symposium BIOMATERIALS, SENSORS & SURFACES, D: 'Surface modifications of diamond and related materials' which was held on 7-9 June 2010 in Strasbourg (France). With about 54 oral and poster presentations given from teams all over the world it was a very interesting, dense and lively meeting. The symposium focused on chemical modifications applied to graft surfaces of diamond, nano-diamond particles, diamond-like carbon, graphene, graphite and carbon nano-tubes with linker molecular layers for realization of bio-sensors, bio-markers, separation techniques, and switchable chemical links. Presented techniques span spontaneous bonding to photo-chemical attachment, electrochemical modifications, to Suzuki-coupling of aryl molecules. Special attention was drawn to mechanisms driving bonding kinetics such as electron transfer reactions, hydrogen cleavage reactions by nucleophilic molecules and growths schemas which vary from correlated two-dimensional chain reactions to three-dimensional cross polymerization. Hydrogen terminations, surface defects, surface roughness and atomic arrangements of surface carbon atoms were of interest to elucidate bonding mechanisms. In addition, bonding stability, either of linker molecules or of complex functionalized surfaces with DNA, proteins and enzymes was discussed by several speakers as well as details of the electronic interfaces between solid transducers and bio-layers. Here the characterization of surface and interface defect densities, of Fermi level pinning and of electron transfer rates was a major topic. Miniaturization of sensor area and application of new detection schemas was discussed. Diamond nano-particles which are increasingly used as biomarkers in drug delivery experiments also attracted attention. The organizers express our gratitude to the international members of the scientific committee who actively contributed to ensure an attractive

  13. Charge collection efficiency in SI GaAs grown from melts with variable composition as a material for solar neutrino detection

    CERN Document Server

    Verbitskaya, E; Ivanov, A; Strokan, N; Vasilev, V; Markov, A; Polyakov, A; Gavrin, V; Kozlova, Y; Veretenkin, E; Bowles, T J

    2000-01-01

    The results on electrical characteristics and charge collection efficiency in the detectors from bulk SI GaAs developed as a material for solar neutrino spectroscopy are presented. SI GaAs crystals were grown by the Czochralski method. The changes in the stoichiometric components are permanently controlled. It is shown that the performance of GaAs p sup + -i-n sup + structures provided the range of operational reverse voltage up to 1 kV. Measurement of deep level spectra and their analysis reveal the dominant deep levels - hole traps E sub v +0.51 and +0.075 eV in GaAs grown from stoichiometric and nonstoichiometric melts, respectively. Investigation of carrier transport properties and bulk homogeneity evinced in charge collection efficiency has shown advantageous results for SI GaAs grown from stoichiometric melt. The reduction of carrier transport parameters and charge collection efficiency in GaAs grown from nonstoichiometric melt is analyzed taking into consideration formation of the hole trap E sub v +0....

  14. Charge collection efficiency in SI GaAs grown from melts with variable composition as a material for solar neutrino detection

    International Nuclear Information System (INIS)

    Verbitskaya, E.; Eremin, V.; Ivanov, A.; Strokan, N.; Vasilev, V.; Markov, A.; Polyakov, A.; Gavrin, V.; Kozlova, Yu.; Veretenkin, E.; Bowles, T.J.

    2000-01-01

    The results on electrical characteristics and charge collection efficiency in the detectors from bulk SI GaAs developed as a material for solar neutrino spectroscopy are presented. SI GaAs crystals were grown by the Czochralski method. The changes in the stoichiometric components are permanently controlled. It is shown that the performance of GaAs p + -i-n + structures provided the range of operational reverse voltage up to 1 kV. Measurement of deep level spectra and their analysis reveal the dominant deep levels - hole traps E v +0.51 and +0.075 eV in GaAs grown from stoichiometric and nonstoichiometric melts, respectively. Investigation of carrier transport properties and bulk homogeneity evinced in charge collection efficiency has shown advantageous results for SI GaAs grown from stoichiometric melt. The reduction of carrier transport parameters and charge collection efficiency in GaAs grown from nonstoichiometric melt is analyzed taking into consideration formation of the hole trap E v +0.075 eV, presumably assigned to Ga antisite and its influence on the concentration of the ionized deep donor level EL2 +

  15. Enhancement of photoluminescence from GaInNAsSb quantum wells upon annealing: improvement of material quality and carrier collection by the quantum well

    International Nuclear Information System (INIS)

    Baranowski, M; Kudrawiec, R; Latkowska, M; Syperek, M; Misiewicz, J; Sarmiento, T; Harris, J S

    2013-01-01

    In this study we apply time resolved photoluminescence and contactless electroreflectance to study the carrier collection efficiency of a GaInNAsSb/GaAs quantum well (QW). We show that the enhancement of photoluminescence from GaInNAsSb quantum wells annealed at different temperatures originates not only from (i) the improvement of the optical quality of the GaInNAsSb material (i.e., removal of point defects, which are the source of nonradiative recombination) but it is also affected by (ii) the improvement of carrier collection by the QW region. The total PL efficiency is the product of these two factors, for which the optimal annealing temperatures are found to be ∼700 °C and ∼760 °C, respectively, whereas the optimal annealing temperature for the integrated PL intensity is found to be between the two temperatures and equals ∼720 °C. We connect the variation of the carrier collection efficiency with the modification of the band bending conditions in the investigated structure due to the Fermi level shift in the GaInNAsSb layer after annealing.

  16. Guide on a national system for collecting, assessing and disseminating information on safety-related events in nuclear power plants

    International Nuclear Information System (INIS)

    1983-02-01

    There is a wide spectrum of safety significance in the events that can occur during nuclear power plant operations. It is important that lessons be learned from safety-related events (hereinafter referred to as unusual events) so as to improve the safety of nuclear power plants. Hence formal procedures should be established for this purpose. The purpose of this document is to provide guidance to Member States for establishing a system (hereinafter referred to as a national system) for collecting, storing, retrieving, assessing and disseminating information on unusual events in nuclear power plants. The guidance given is based on experience gained in the use of existing national and international systems. This guide covers a national system that is part of a programme to improve nuclear power plant safety using experience gained from operating plants both within and outside the country. Implementing the recommendations in this guide would render any national system compatible with other national systems and facilitate the participation in the IAEA System for Reporting Unusual Events with Safety Significance (hereinafter referred to as the IAEA Incident Reporting System, IAEA-IRS) for more widespread dissemination of lessons learned from nuclear power plant operation

  17. Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

    International Nuclear Information System (INIS)

    2006-01-01

    The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology [es

  18. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-09

    The document reproduces the text of the Notes Verbales received by the Director General of the IAEA on 20 October 1999 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, the Slovak Republic, South Africa, Spain, Sweden, Switzerland, Ukraine, the United Kingdom, and the United States of America relating to the transfers of nuclear-related dual-use equipment, materials, software and related technology.

  19. Communications received from certain Member States regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

    International Nuclear Information System (INIS)

    2000-01-01

    The document reproduces the text of the Notes Verbales received by the Director General of the IAEA on 20 October 1999 from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, the Slovak Republic, South Africa, Spain, Sweden, Switzerland, Ukraine, the United Kingdom, and the United States of America relating to the transfers of nuclear-related dual-use equipment, materials, software and related technology

  20. Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

    International Nuclear Information System (INIS)

    2006-01-01

    The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology

  1. Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

    International Nuclear Information System (INIS)

    2006-01-01

    The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology [fr

  2. Material interactions relating to long-term geologic disposal of nuclear waste glass

    International Nuclear Information System (INIS)

    Bibler, N.E.; Jantzen, C.M.

    1986-01-01

    This review paper systematizes the additional interactions that materials in a geologic repository will impose on the borosilicate glass waste form-groundwater interactions. These materials are the steel canister that holds the glass, the steel overpack over the canister, backfill materials that may be used, and last, the repository host rock. The repository geologies reviewed are tuff, salt, basalt, and granite. The interactions emphasized are those appropriate to conditions expected after repository closure, e.g., oxic vs anoxic conditions. Whenever possible, the effect of radiation from the waste form on the interaction(s) is examined. The interactions are evaluated based on their effect on the release and speciation of various elements including radionuclides from the glass. Repository relevant interactions testing that requires further study before long-term predictions can be made are noted. 62 refs

  3. Details of criminological investigations of large-valued thefts related to nuclear materials (diversion safeguards program)

    International Nuclear Information System (INIS)

    Leachman, R.B.; Cornella, A.P.

    1972-06-01

    Studies were made of five areas of criminology which have great similarity to the case of nuclear materials. Actual cases of crimes were analyzed by experts in law enforcement and criminal justice. To identify fields of analogous criminology, possible characteristics of nuclear material thefts were considered: total value, high unit cost, limited marketability, special technology for handling, and licensing. The items considered to be analogous to nuclear materials in these aspects were: narcotics, data (as exists in computer memories, tapes, or discs), precious metal and gems, objects of art, and weapons. A criminology survey was conducted in which 509 individuals received one or more questionnaires soliciting opinion responses. Sixty-five questionnaires were returned. Eighty-four individuals replied by letter indicating inadequate knowledge of the crimes being surveyed. The questionnaire was supplemented by 18 interviews with criminal justice and industry personnel for more definitive information on diversion problems. Results of this survey are reported

  4. Study of the Variation of Material layer Compotition and Thickness Related Neutron Flux and Gamma Radiation

    Science.gov (United States)

    Nirmalasari, Yuliana Dian; Suparmi; Sardjono, Y.

    2017-11-01

    Optimation of simulation design of collimator is corresponding to 30 MeV cyclotron generator. The simulation has used the variation of the thickness materials layers that was applied at treatment room’s door. The purpose of the variation and thickness of the material in this simulation to obtain optimum results for the shielding design in the irradiation chamber. The layers that we used are Pb-Fe and Pb-SS312. Simulation on cancer treatment is used with monte carlo simaulation MCNPX. The spesifications that we used for cyclotron is the spesification of the HM-30 Proton Cyclotron from Sumitomo Heavy Industries Ltd. The variation of the thickness materials layers that was applied at treatment room’s door are Pb remains 4cm while Fe and SS312 varies between 2 cm, 4 cm, 6 cm respectively. This simulation of Fe layer on Pb was give good result in measurement simulation at 4 cm thickness.

  5. Modeling of the interfacial separation work in relation to impurity concentration in adjoining materials

    Science.gov (United States)

    Alekseev, Ilia M.; Makhviladze, Tariel M.; Minushev, Airat Kh.; Sarychev, Mikhail E.

    2010-02-01

    On the basis of the general thermodynamic approach developed in a model describing the influence of point defects on the separation work at an interface of solid materials is developed. The kinetic equations describing the defect exchange between the interface and the material bulks are formulated. The model have been applied to the case when joined materials contain such point defects as impurity atoms (interstitial and substitutional), concretized the main characteristic parameters required for a numerical modeling as well as clarified their domains of variability. The results of the numerical modeling concerning the dependences on impurity concentrations and the temperature dependences are obtained and analyzed. Particularly, the effects of interfacial strengthening and adhesion incompatibility predicted analytically for the case of impurity atoms are verified and analyzed.

  6. Estimation of Resource Productivity and Efficiency: An Extended Evaluation of Sustainability Related to Material Flow

    Directory of Open Access Journals (Sweden)

    Pin-Chih Wang

    2014-09-01

    Full Text Available This study is intended to conduct an extended evaluation of sustainability based on the material flow analysis of resource productivity. We first present updated information on the material flow analysis (MFA database in Taiwan. Essential indicators are selected to quantify resource productivity associated with the economy-wide MFA of Taiwan. The study also applies the IPAT (impact-population-affluence-technology master equation to measure trends of material use efficiency in Taiwan and to compare them with those of other Asia-Pacific countries. An extended evaluation of efficiency, in comparison with selected economies by applying data envelopment analysis (DEA, is conducted accordingly. The Malmquist Productivity Index (MPI is thereby adopted to quantify the patterns and the associated changes of efficiency. Observations and summaries can be described as follows. Based on the MFA of the Taiwanese economy, the average growth rates of domestic material input (DMI; 2.83% and domestic material consumption (DMC; 2.13% in the past two decades were both less than that of gross domestic product (GDP; 4.95%. The decoupling of environmental pressures from economic growth can be observed. In terms of the decomposition analysis of the IPAT equation and in comparison with 38 other economies, the material use efficiency of Taiwan did not perform as well as its economic growth. The DEA comparisons of resource productivity show that Denmark, Germany, Luxembourg, Malta, Netherlands, United Kingdom and Japan performed the best in 2008. Since the MPI consists of technological change (frontier-shift or innovation and efficiency change (catch-up, the change in efficiency (catch-up of Taiwan has not been accomplished as expected in spite of the increase in its technological efficiency.

  7. Unmeasured improvement work: the lack of routinely collected, service-related data in NHS endoscopy units in England involved in "modernisation"

    Directory of Open Access Journals (Sweden)

    Hutchings Hayley A

    2008-01-01

    Full Text Available Abstract Background The availability of routinely collected service-related endoscopy data from NHS endoscopy units has never been quantified. Methods This retrospective observational study asked 19 endoscopy units to submit copies of all in-house, service-related endoscopy data that had been routinely collected by the unit – Referral numbers, Activity, Number of patients waiting and Number of lost slots. Nine of the endoscopy units had previously participated in the Modernising Endoscopy Services (MES project during 2003 to redesign their endoscopy services. These MES sites had access to additional funding and data collection software. The other ten (Control sites had modernised independently. All data was requested in two phases and corresponded to eight specific time points between January 2003 and April 2006. Results Only eight of 19 endoscopy units submitted routinely collected, service-related data. Another site's data was collected specifically for the study. A further two units claimed to routinely collect service-related data but did not submit any to the study. The remaining eight did not collect any service-related endoscopy data routinely and liaised with their Trust for data. Of the eight sites submitting service-related data, only three were MES project sites. Of these three, the data variables collected were limited and none collected the complete set of endoscopy data variables requested. Of the other five sites, two collected all four endoscopy data types. Data for the three MES project sites went back as far as January 2003, whilst the five Control sites were only able to submit data from December 2003 onwards. Conclusion There was a lack of service-related endoscopy data routinely collected by the study sites, especially those who had participated in the MES project. Without this data, NHS endoscopy services cannot have a true understanding of their services, cannot identify problems and cannot measure the impact of any

  8. Experience gained from some incidents related to the shipment of radioactive materials

    International Nuclear Information System (INIS)

    Devillers, C.

    1989-08-01

    The number of accidents occurring during shipment of dangerous materials in France varies between 200 and 250 each year. Those concerning radioactive materials represent one or two events per year. Six incidents or accidents recorded these last few years have been selected as particularly significant; they include not only events on public highways but also events on nuclear sites relevant to transportation safety. These events are summarized together with corrective actions engaged after analysis of the causes of the events. Finally, more general conclusions drawn from these abnormal events are presented from the point of view of emergency preparedness

  9. Scientific report. Plasma-wall interaction studies related to fusion reactor materials

    International Nuclear Information System (INIS)

    Temmerman, G. De

    2006-01-01

    This scientific report summarises research done on erosion and deposition mechanisms affecting the optical reflectivity of potential materials for use in the mirrors used in fusion reactors. Work done in Juelich, Germany, at the Federal Institute of Technology in Lausanne, Switzerland, the JET laboratory in England and in Basle is discussed. Various tests made with the mirrors are described. Results obtained are presented in graphical and tabular form and commented on. The influence of various material choices on erosion and deposition mechanisms is discussed

  10. Solid state nuclear magnetic resonance: investigating the spins of nuclear related materials

    International Nuclear Information System (INIS)

    Charpentier, Th.

    2007-10-01

    The author reviews his successive research works: his research thesis work on the Multiple Quantum Magic Angle Spinning (MQMAS) which is a quadric-polar nucleus multi-quanta correlation spectroscopy method, the modelling of NMR spectra of disordered materials, the application to materials of interest for the nuclear industry (notably the glasses used for nuclear waste containment). He presents the various research projects in which he is involved: storing glasses, nuclear magnetic resonance in paramagnetism, solid hydrogen storing matrices, methodological and instrument developments in high magnetic field and high resolution solid NMR, long range distance measurement by solid state Tritium NMR (observing the structure and dynamics of biological complex systems at work)

  11. IE Information Notice No. 85-08: Industry experience on certain materials used in safety-related equipment

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    This information notice is being issued to provide licensees and construction permit holders with information pertaining to the behavior of certain materials used in safety-related equipment. The materials, as described below, were observed to have the potential of degrading the operability of safety-related equipment. These observations were made during environmental qualification testing and/or during routine inspection of in-service equipment. The notice describes the following: elastomeric seals used in personnel air locks for the reactor containment systems; epoxy phenolic coating applied to the lower portion of the interior surface of diesel oil storage tanks; the use of Viton elastomer as the seal material in hydrogen recombiner applications; and environmental qualification of ASCO NP valves with Viton and ethylene propylene parts

  12. Advisory group meeting on safeguards related to final disposal of nuclear material in waste and spent fuel (AGM-660)

    International Nuclear Information System (INIS)

    1988-12-01

    The Advisory Group was asked to advise the Agency on the circumstances under which the Agency might logically implement Section 11 of INFCIRC/153, or the comparable Section 26c of INFCIRC/66/rev2, which provides for a determination that nuclear material is 'practicably irrecoverable', and that therefore safeguards could be terminated. This advice was sought, and in the paragraphs that follow is given, in two areas. One relates to 'waste', which the Group understands as referring to material which contains nuclear material that the State/facility operator believes has no economically recoverable value and for which no further use is foreseen. The other relates to spent fuel, which in some cases may be placed in geological 'permanent repositories'

  13. Improvements in or relating to method of preparing porous material/synthetic polymer composites

    International Nuclear Information System (INIS)

    Hills, P.R.; McGahan, D.J.

    1976-01-01

    Monomers in a porous natural material, e.g. cellulose fibre, wood, are polymerized with gamma radiation. Addition of a chlorinated hydrocarbon to the monomer improves fire resistance, brittleness and friction coefficient and reduces the radiation dose required for polymerization. (U.K.)

  14. Relating the structural strength of concrete sewer pipes and material properties retrieved from core samples

    NARCIS (Netherlands)

    Stanic, N.; Langeveld, J.G.; Salet, Theo; Clemens, F.H.L.R.

    2016-01-01

    Drill core samples are taken in practice for an analysis of the material characteristics of concrete pipes in order to improve the quality of the decision-making on rehabilitation actions. Earlier research has demonstrated that core sampling is associated with a significant uncertainty. In this

  15. Lower life satisfaction related to materialism in children frequently exposed to advertising

    NARCIS (Netherlands)

    Opree, S.J.; Buijzen, M.; Valkenburg, P.M.

    2012-01-01

    OBJECTIVE: Research among adults suggests that materialism and life satisfaction negatively influence each other, causing a downward spiral. So far, cross-sectional research among children has indicated that materialistic children are less happy, but causality remains uncertain. This study adds to

  16. Guide relative to the regulatory requirements applicable to the radioactive materials transport in airport area

    International Nuclear Information System (INIS)

    2006-02-01

    This guide makes an inventory of all the points necessary for the correct functioning of the transport of radioactive materials in airport zone. Stowage of the parcels, program of radiological protection (P.R.P.), operation of transport, quality assurance, radiation dose evaluation, radiation monitoring, dose optimization, storage management, are the principal points of this guide. (N.C.)

  17. Depression, materialism, and excessive Internet use in relation to compulsive buying.

    Science.gov (United States)

    Mueller, Astrid; Mitchell, James E; Peterson, Lisa A; Faber, Ronald J; Steffen, Kristine J; Crosby, Ross D; Claes, Laurence

    2011-01-01

    The objective of the study was to examine the relationship between compulsive buying (CB), depression, materialism, and excessive Internet use. An online survey of 387 consumers was conducted including questions about demographics and shopping venues, the Compulsive Buying Scale, the Patient Health Questionnaire Depression Scale, the Materialistic Values Scale, and questions concerning excessive Internet use. Seventeen percent of the participants reported Compulsive Buying Scale scores less than -1.34 and were considered to be having CB. Participants with CB did not significantly differ from those without CB regarding age, sex, marital status, annual household income, and shopping preferences. Individuals with CB reported more depressive symptoms, higher materialistic values endorsement, and more severe excessive Internet use compared with those without CB. Results of a stepwise logistic regression analysis with CB as the dependent variable showed that materialism and depression were associated with CB, whereas excessive Internet use was not. Materialism and depression jointly influence CB. Further research is needed to examine the influence of materialism on CB in a clinical sample consisting of patients with diagnosed CB. Copyright © 2011 Elsevier Inc. All rights reserved.

  18. Law and Responsibilities (Law-Related Education Materials) 1982-83. Okeechobee County.

    Science.gov (United States)

    Allen, Rodney F., Ed.

    Teacher-developed materials for legal education in elementary and junior high schools in Florida are presented. The lessons focus on the consequences of crime and rule-breaking in terms of the law and penal systems, the victim and loved ones, the criminal and loved ones (as victims, too), and the community, which suffers and pays the costs. In the…

  19. Inspection of the coupling part material degradation. Some experiences and results from SKODA JS related to internals

    International Nuclear Information System (INIS)

    Brynda, J.

    1998-01-01

    In this presentation some experiences and results from SKODA JS, related to internals, are reported. Sketches of the construction of WWER 440 RPV and internal's materials, including chemical composition are given. The results of hardness tests on internal parts are reported as well as some changes in the construction of internal parts which were made to improve their crack and fracture properties

  20. Doorways II: Community Counselor Reference Materials. On School-Related Gender-Based Violence Prevention and Response

    Science.gov (United States)

    US Agency for International Development, 2009

    2009-01-01

    The Doorways training program was designed by the U.S. Agency for International Development (USAID)-funded Safe Schools Program (Safe Schools) to enable teachers, community members and students to prevent and respond to school-related gender-based violence (SRGBV). This booklet, "Doorways II: Community Counselor Reference Materials on…

  1. Investigating the relative influences of molecular dimensions and binding energies on diffusivities of guest species inside nanoporous crystalline materials

    NARCIS (Netherlands)

    Krishna, R.; van Baten, J.M.

    2012-01-01

    The primary objective of this article is to investigate the relative influences of molecular dimensions and adsorption binding energies on unary diffusivities of guest species inside nanoporous crystalline materials such as zeolites and metal-organic frameworks (MOFs). The investigations are based

  2. 26 CFR 301.6104(a)-2 - Public inspection of material relating to pension and other plans.

    Science.gov (United States)

    2010-04-01

    ... pension and other plans. 301.6104(a)-2 Section 301.6104(a)-2 Internal Revenue INTERNAL REVENUE SERVICE... and Returns Returns and Records § 301.6104(a)-2 Public inspection of material relating to pension and...— (i) A pension, profit-sharing, or stock bonus plan under section 401(a), (ii) An annuity plan under...

  3. Report of the APS summer study on physics problems relating to energy technologies: radiation effects on materials

    International Nuclear Information System (INIS)

    Vook, F.L.; Birnbaum, H.K.; Blewitt, T.H.

    1974-06-01

    The status of research and development programs related to radiation effects on materials is reviewed. Information is included on point defects in metals, dislocations, radiation damage, simulation of neutron damage, H and He in metals, insulators, semiconductors, and superconductors. (U.S.)

  4. Proceedings of the first international conference on indium phosphide and related materials for advanced electronic and optical devices

    International Nuclear Information System (INIS)

    Singh, R.; Messick, L.J.

    1989-01-01

    This book contains the proceedings of the first international conference on indium phosphide and related materials for advanced electronic and optical devices. Topics covered include: Growth and characterization of bulk and epitaxial films, Passivation technology, Processing technology, High speed optoelectronic integrated circuits, and Solar cells

  5. The Belgoprocess Strategy Relating to the Management of Materials from Decommissioning

    International Nuclear Information System (INIS)

    Teunckens, L.; Lewandowski, P.; Walthery, R.; Ooms, B.

    2003-01-01

    Belgium started its nuclear program quite early. The first installations were constructed in the fifties, and presently, more than 55 % of the Belgian electricity production is provided by nuclear power plants. After 30 years of nuclear experience, Belgium started decommissioning of nuclear facilities in the eighties with two main projects: the BR3-PWR plant and the Eurochemic reprocessing plant. The BR3-decommissioning project is carried out at the Belgian Nuclear Research Centre, while the decommissioning of the former Eurochemic reprocessing plant is managed and operated by Belgoprocess n.v., which is also operating the centralized waste treatment facilities and the interim storage for Belgian radioactive waste. Some fundamental principles have to be considered for the management of materials resulting from the decommissioning of nuclear installations, equipment and/or components, mainly based on the guidelines of the ''IAEA-Safety Fundamentals. The Principles of Radioactive Waste Management. Safety Series No. 111-F, IAEA, Vienna, 1995'' with respect to radioactive waste management. Two of the fundamental principles indicated in this document are specifically dealing with the strategy for the management of materials from decommissioning, ''Generation of radioactive waste shall be kept to the minimum practicable'' (seventh principle), and ''Radioactive waste shall be managed in such a way that it will not impose undue burdens on future generations'' (fifth principle). Based on these fundamental principles, Belgoprocess has made a straightforward choice for a strategy with minimization of the amount of materials to be managed as radioactive waste. This objective is obtained through the use of advanced decontamination techniques and the unconditional release of decontaminated materials. Unconditionally released materials are recycled, such as i.e., metal materials that are removed to conventional melting facilities, or are removed to conventional industrial

  6. Science Library of Test Items. Volume Twenty-Two. A Collection of Multiple Choice Test Items Relating Mainly to Skills.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

  7. Science Library of Test Items. Volume Eighteen. A Collection of Multiple Choice Test Items Relating Mainly to Chemistry.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

  8. Science Library of Test Items. Volume Twenty. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 1.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

  9. Science Library of Test Items. Volume Seventeen. A Collection of Multiple Choice Test Items Relating Mainly to Biology.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

  10. Science Library of Test Items. Volume Nineteen. A Collection of Multiple Choice Test Items Relating Mainly to Geology.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

  11. Study on photon sensitivity of silicon diodes related to materials used for shielding

    International Nuclear Information System (INIS)

    Moiseev, T.

    1999-01-01

    Large area silicon diodes used in electronic neutron dosemeters have a significant over-response to X- and gamma-rays, highly non-linear at photon energies below 200 keV. This over-response to photons is proportional to the diode's active area and strongly affects the neutron sensitivity of such dosemeters. Since silicon diodes are sensitive to light and electromagnetic fields, most diode detector assemblies are provided with a shielding, sometimes also used as radiation filter. In this paper, the influence of materials covering the diode's active area is investigated using the MCNP-4A code by estimating the photon induced pulses in a typical silicon wafer (300 μm thickness and 1 cm diameter) when provided with a front case cover. There have been simulated small-size diode front covers made of several materials with low neutron interaction cross-sections like aluminium, TEFLON, iron and lead. The estimated number of induced pulses in the silicon wafer is calculated for each type of shielding at normal photon incidence for several photon energies from 9.8 keV up to 1.15 MeV and compared with that in a bare silicon wafer. The simulated pulse height spectra show the origin of the photon-induced pulses in silicon for each material used as protective cover: the photoelectric effect for low Z front case materials at low-energy incident photons (up to about 65 keV) and the Compton and build-up effects for high Z case materials at higher photon energies. A simple means to lower and flatten the photon response of silicon diodes over an extended X- and gamma rays energy range is proposed by designing a composed photon filter. (author)

  12. Study on Photon Sensitivity of Silicon Diodes Related to Materials Used for Shielding

    International Nuclear Information System (INIS)

    Moiseev, T.

    2000-01-01

    Large area Silicon diodes used in electronic neutron dosemeters have a significant over-response to X and gamma rays, highly non-linear at photon energies below 200 keV. This over-response to photons is proportional to the diodes active area and strongly affects the neutron sensitivity of such dosemeters. Since Silicon diodes are sensitive to light and electromagnetic fields, most diode detector assemblies are provided with a shielding, sometimes also used as radiation filter. In this paper, the influence of materials covering the diode's active area is investigated using the MCNP-4A code by estimating the photon induced pulses in a typical silicon wafer (300 μm thickness and 1 cm diameter) when provided with a front case cover. There have been simulated small-size diode front covers made of several materials with low neutron interaction cross-sections like aluminium, TEFLON, iron and lead. The estimated number of induced pulses in the silicon wafer is calculated for each type of shielding at normal photon incidence for several photon energies from 9.8 keV up to 1.15 MeV and compared with that in a bare silicon wafer. The simulated pulse height spectra show the origin of the photon induced pulses in silicon for each material used as protective cover: the photoelectric effect for low Z front case materials at low energy incident photons (up to about 65 keV) and the Compton and build-up effects for high Z case materials at higher photon energies. A simple means to lower and flatten the photon response of silicon diodes over an extended X and gamma rays energy range is proposed by designing a composed photon filter. (author)

  13. Alcohol-related cancers and genetic susceptibility in Europe: the ARCAGE project: study samples and data collection.

    LENUS (Irish Health Repository)

    Lagiou, Pagona

    2009-02-01

    Cancers of the upper aerodigestive tract (UADT) include those of the oral cavity, pharynx (other than nasopharynx), larynx, and esophagus. Tobacco smoking and consumption of alcoholic beverages are established causes of UADT cancers, whereas reduced intake of vegetables and fruits are likely causes. The role of genetic predisposition and possible interactions of genetic with exogenous factors, however, have not been adequately studied. Moreover, the role of pattern of smoking and drinking, as well as the exact nature of the implicated dietary variables, has not been clarified. To address these issues, the International Agency for Research on Cancer initiated in 2002 the alcohol-related cancers and genetic susceptibility (ARCAGE) in Europe project, with the participation of 15 centers in 11 European countries. Information and biological data from a total of 2304 cases and 2227 controls have been collected and will be used in a series of analyses. A total of 166 single nucleotide polymorphisms of 76 genes are being studied for genetic associations with UADT cancers. We report here the methodology of the ARCAGE project, main demographic and lifestyle characteristics of the cases and controls, as well as the distribution of cases by histology and subsite. About 80% of cases were males and fewer than 20% of all cases occurred before the age of 50 years. Overall, the most common subsite was larynx, followed by oral cavity, oropharynx, esophagus and hypopharynx. Close to 90% of UADT cancers were squamous cell carcinomas. A clear preponderance of smokers and alcohol drinkers among UADT cases compared with controls was observed.

  14. Coordinated research programme on safety of RBMK type NPPs in relation to external events. V. 1. Working material

    International Nuclear Information System (INIS)

    1999-01-01

    The present volume is a collection of progress reports which have been submitted within the scope of the CRP on safety of RBMK type NPPs in relation to external events including seismic related papers and man-induced events (explosions and airplane crash). It includes papers concerned with experience related to RBMK equipment testing and calculations of seismic resistance, soil-structure interactions analysis, safety assurance, aircraft impact qualification and other external events for RBMK type NPP, seismic stability of NPPs in Eastern Europe, probabilistic assessment of NPP safety under aircraft impact, dynamic analysis of NPPs, screening of external hazards for NPP

  15. Study of variation of materials patients room's door related of neutron flux iradiation

    Science.gov (United States)

    Nirmalasari, Yuliana Dian; Suparmi, A.; Sardjono, Y.

    2017-08-01

    The treatment chamber of patients has been simulating with MCNPX Code. Optimation of simulation design of Irradiation chamber is corresponding to ISO standards for 30 MeV cyclotron generator. The simulation has used the variation of door's materials that was applied at treatment room's door. The variation of materials was Stainless Steel 202 and Pb, the thickness Pb and stainless steel 202 with the thickness were 2 cm, respectively. Neutron flux that was radiated to stainless steel 202 in the sequence was 3.34195 × 105 n . Cm-2 s-1 and 8.41568 × 104 n . Cm-2 s-1, while for Pb was 4.01349 × 105 n . Cm-2 s-1 and 2.58058 × 104 n . Cm-2 s-1. The further, neutron flux that was radiated to Pb and stainless steel 202 with the thickness were 4 cm in sequence was 4.00601 × 105 n . Cm-2 s-1 and 1.71713 × 104 n . Cm-2 s-1 for Pb, while for SS 202 was 3.09925 × 105 n . Cm-2 s-1. From this ratio we concluded that material Pb absorbed higher neutron flux than material Stainless Steel 202. On the other hand, the cost of Pb was more expensive than Stainless Steel 202. In addition, the material Stainless Steel 202 was obtaine more easily than the material Pb. There fore to overcome the economics problem, can try to build the door with stainless still 202 sheet and Pb sheet together. The further, the neutron dose with 2 cm of thickness was 7.69603 × 10-2 Gy and 2.10623 × 10-2 Gy for SS 202, while for Pb was 4.19444 × 10-2 Gy and 1.50581 × 10-2 Gy. While the neutron dose with 4 cm of thickness for SS 202 was 9.39602 × 10-2 Gy and for Pb was 4.46541 × 10-2 Gy and 1.50502 × 10-2 Gy. We recommend that this simulation should be further optimized.

  16. Estimation of the individual and collective doses received by workers and the public during the transport of radioactive materials in france between 1981 and 1990

    International Nuclear Information System (INIS)

    Hamard, J.; Ringot, C.; Bernard, H.; Connat, R.; Lecoq, P.; Morin, P.

    1993-01-01

    The monitoring of the exposure of workers and the public during the transport of radioactive materials is complicated by the mobile nature of the sources and by the fact that, up to now, a large proportion of workers have not been considered to be at risk and their exposure has therefore not been the subject of surveillance. Likewise, in the case of the public, the mobile nature of the sources makes it difficult to define a critical group which could be the subject of dose evaluation. For this reason, the IAEA transport regulations recommend periodic evaluations of exposure to verify that it remains below an acceptable level, in accordance with the principle of optimization and to ensure that dose limits are complied with. In France, an inquiry covering the workers of the main companies engaged in the transport of radioactive materials has been conducted on a two-yearly basis since 1980, and the results have been published at each PATRAM meeting. This inquiry now spans a period of ten years (1980 to 1990) and it is possible to see how exposure has evolved as a function of the development of the French nuclear power programme and the consequent increase in a number of transport operations. As concerns the public, a comparison is made between the exposure levels estimated in the study and the exposure levels calculated by application of the RADTRAN model developed for the purpose by the IAEA. The results show the evolution of the maximum annual doses, the average doses and the collective doses received by workers during the transport of different radio-pharmaceutical and fuel cycle products, as well as the collective dose for the public during the period covered. (author)

  17. Aerosolization of fungi, (1→3)-β-D glucan, and endotoxin from flood-affected materials collected in New Orleans homes

    Science.gov (United States)

    Adhikari, Atin; Jung, Jaehee; Reponen, Tiina; Lewis, Jocelyn Suzanne; DeGrasse, Enjoli C.; Grimsley, L. Faye; Chew, Ginger L.; Grinshpun, Sergey A.

    2015-01-01

    Standing water and sediments remaining on flood-affected materials were the breeding ground for many microorganisms in flooded homes following Hurricane Katrina. The purpose of this laboratory study was to examine the aerosolization of culturable and total fungi, (1→3)-β-D glucan, and endotoxin from eight flood-affected floor and bedding materials collected in New Orleans homes, following Hurricane Katrina. Aerosolization was examined using the Fungal Spore Source Strength Tester (FSSST) connected to a BioSampler. Dust samples were collected by vacuuming. A two-stage cyclone sampler was used for size-selective analysis of aerosolized glucan and endotoxin. On average, levels of culturable fungi ranged from undetectable (lower limit = 8.3×104) to 2.6×105 CFU/m2; total fungi ranged from 2.07×105 to 1.6×106 spores/m2; (1→3)-β-D glucan and endotoxin were 2.0×103 – 2.9×104 ng/m2 and 7.0×102 – 9.3×104 EU/m2, respectively. The results showed that 5–15 min sampling is sufficient for detecting aerosolizable biocontaminants with the FSSST. Smaller particle size fractions (1.8 μm) fractions, which raises additional exposure concerns. Vacuuming was found to overestimate inhalation exposure risks by a factor of approximately 102 for (1→3)-β-D glucan and by 103 to 104 for endotoxin as detected by the FSSST. The information generated from this study is important with respect to restoration and rejuvenation of the flood-affected areas in New Orleans. We believe the findings will be significant during similar disasters in other regions of the world including major coastal floods from tsunamis. PMID:19201399

  18. Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: A critical assessment

    International Nuclear Information System (INIS)

    Straffelini, Giovanni; Ciudin, Rodica; Ciotti, Alessandro; Gialanella, Stefano

    2015-01-01

    This critical review presents several aspects related to the use of copper as a main component in brake pads in road vehicles. The compositions of these materials are attracting increasing interest and concern due to the relative contribution of wear products to particulate matter emissions in the environment as a result of braking action even though there has been a reduction in exhaust products from internal combustion engines. We review the data on the main wear mechanisms in brake systems and highlight the positive role of copper. However, similar to other heavy metal emissions, even the release of copper into the atmosphere may have important environmental and health effects. Thus, several replacement strategies are being pursued, and the positive and negative features will be critically reviewed. Additionally, the future perspectives in materials development will be discussed. - Highlights: • Copper in brake pad materials: role and concerns. • Environmental and health impact of copper. • Copper replacement in frictional brake materials. • International legislation and standards on the above issues. - Importance of copper in brake pad materials and concern as regards environmental and health impact of its emission as brake wear product.

  19. Neutron irradiation effects in fusion or spallation structural materials: Some recent insights related to neutron spectra

    International Nuclear Information System (INIS)

    Garner, F.A.; Greenwood, L.R.

    1998-01-01

    A review is presented of recent insights on the role of transmutation in the development of radiation-induced changes in dimension or radiation-induced changes in physical or mechanical properties. It is shown that, in some materials and some neutron spectra, transmutation can significantly affect or even dominate a given property change process. When the process under study is also sensitive to displacement rate, and especially if it involves radiation-induced segregation and precipitation, it becomes much more difficult to separate the transmutation and displacement rate dependencies. This complicates the application of data derived from 'surrogate' spectra to predictions in other flux-spectra environments. It is also shown in this paper that one must be sensitive to the impact of previously -ignored 'small' variations in neutron spectra within a given reactor. In some materials these small variations have major consequences. (author)

  20. Microscopic properties of lithium, sodium, and magnesium battery anode materials related to possible dendrite growth

    International Nuclear Information System (INIS)

    Jäckle, Markus; Groß, Axel

    2014-01-01

    Lithium and magnesium exhibit rather different properties as battery anode materials with respect to the phenomenon of dendrite formation which can lead to short-circuits in batteries. Diffusion processes are the key to understanding structure forming processes on surfaces. Therefore, we have determined adsorption energies and barriers for the self-diffusion on Li and Mg using periodic density functional theory calculations and contrasted the results to Na which is also regarded as a promising electrode material in batteries. According to our calculations, magnesium exhibits a tendency towards the growth of smooth surfaces as it exhibits lower diffusion barriers than lithium and sodium, and as an hcp metal it favors higher-coordinated configurations in contrast to the bcc metals Li and Na. These characteristic differences are expected to contribute to the unequal tendencies of these metals with respect to dendrite growth

  1. Review of flexible and transparent thin-film transistors based on zinc oxide and related materials

    International Nuclear Information System (INIS)

    Zhang Yong-Hui; Mei Zeng-Xia; Liang Hui-Li; Du Xiao-Long

    2017-01-01

    Flexible and transparent electronics enters into a new era of electronic technologies. Ubiquitous applications involve wearable electronics, biosensors, flexible transparent displays, radio-frequency identifications (RFIDs), etc. Zinc oxide (ZnO) and relevant materials are the most commonly used inorganic semiconductors in flexible and transparent devices, owing to their high electrical performances, together with low processing temperatures and good optical transparencies. In this paper, we review recent advances in flexible and transparent thin-film transistors (TFTs) based on ZnO and relevant materials. After a brief introduction, the main progress of the preparation of each component (substrate, electrodes, channel and dielectrics) is summarized and discussed. Then, the effect of mechanical bending on electrical performance is highlighted. Finally, we suggest the challenges and opportunities in future investigations. (paper)

  2. Study on ceramic breeder and related materials by means of work function measurement under irradiation

    International Nuclear Information System (INIS)

    Luo, G.N.; Terai, T.; Yamawaki, M.; Yamaguchi, K.

    2002-01-01

    Ceramic breeder materials, Li 2 O, LiAlO 2 and Li 4 SiO 4 , under irradiation have been studied using a Kelvin probe that measures work function changes of materials. Surface charging was observed to influence greatly the probe output, which can be explained qualitatively employing a model concerning induction electric field due to external field and free charges on ceramic surface. It is found that the insulating ceramics could not be studied properly with the Kelvin probe. A probable solution is to heat the ceramics, so as to raise their electric conductivities high enough to root out the surface charging. Also briefly discussed is the application of the probe to metals under ion irradiation. (orig.)

  3. Material-related issues at high-power and high-energy ion beam facilities

    CERN Document Server

    Bender, M.; Tomut, M.; Trautmann, C.

    2015-01-01

    When solids are exposed to energetic ions (MeV-GeV), their physical and chemical structure can be severely modified. The change is governed by ultrafast dynamical processes starting from the deposition of large energy densities, electronic excitation and ionization processes, and finally damage creation in the atomic lattice system. In many materials, each projectile creates a cylindrical track with a few nanometers in diameter and up to many μm in length. To study and monitor the creation of damage, the GSI irradiation facility dedicated to materials science provides different in-situ and on-line techniques such as high resolution microscopy, X-ray diffraction, optical absorption spectroscopy, thermal imaging and residual gas analysis. The irradiation experiments can be performed under various gas atmospheres and under cryogenic or elevated temperature.

  4. Brush-Like Polymers: New Design Platforms for Soft, Dry Materials with Unique Property Relations

    Science.gov (United States)

    Daniel, William Francis McKemie, Jr.

    Elastomers represent a unique class of engineering materials due to their light weight, low cost, and desirable combination of softness (105 -107 Pa) and large extensibilities (up to 1000%). Despite these advantages, there exist applications that require many times softer modulus, greater extensibility, and stronger strain hardening for the purpose of mimicking the mechanical properties of systems such as biological tissues. Until recently, only liquid-filled gels were suitable materials for such applications, including soft robotics and implants. A considerable amount of work has been done to create gels with superior properties, but despite unique strengths they also suffer from unique weaknesses. This class of material displays fundamental limitations in the form of heterogeneous structures, solvent loss and phase transitions at extreme temperatures, and loss of liquid fraction upon high deformations. In gels the solvent fraction also introduces a large solvent/polymer interaction parameter which must be carefully considered when designing the final mechanical properties. These energetic considerations further exaggerate the capacity for inconstant mechanical properties caused by fluctuations of the solvent fraction. In order to overcome these weaknesses, a new platform for single component materials with low modulus (Standard networks have one major control factor outside of chemistry, the network stand length. Brush-like architectures are created from long strands with regularly grafted side chains creating three characteristic length scales which may be independently manipulated. In collaboration with M. Rubinstein, we have utilized bottlebrush polymer architectures (a densely grafted brush-like polymer) to experimentally verify theoretical predictions of disentangled bottlebrush melts. By attaching well-defined side chains onto long polymer backbones, individual polymer strands are separated in space (similar to dilution with solvent) accompanied by a

  5. Low Temperature Grown and Highly Non-Stoichiometric GaAs and Related Materials

    Science.gov (United States)

    1994-08-03

    Technological University, Houghton, MI 49931 P.W. COOKE* GEO-Centers, Inc., Fort Monmouth, Operations NJ 07703 P. ASOKA -KUMAR and K.G. LYNN Department of...Lake Hopatcong, NJ 07849. possible through the formation of split interstitial 1405 1406 Umlor, Keeble, Cooke, Asoka -Kumar, and Lynn Mean...drawn to guide the eye only.) 1408 Umlor, Keeble, Cooke, Asoka -Kumar, and Lynn commonly observed in our samples with the anneal Division of Materials

  6. Materials interactions relating to long-term geologic disposal of nuclear waste glass

    International Nuclear Information System (INIS)

    Bibler, N.E.; Jantzen, C.M.

    1987-01-01

    In the geologic disposal of nuclear waste glass, the glass will eventually interact with groundwater in the repository system. Interactions can also occur between the glass and other waste package materials that are present. These include the steel canister that holds the glass, the metal overpack over the canister, backfill materials that may be used, and the repository host rock. This review paper systematizes the additional interactions that materials in the waste package will impose on the borosilicate glass waste form-groundwater interactions. The repository geologies reviewed are tuff, salt, basalt, and granite. The interactions emphasized are those appropriate to conditions expected after repository closure, e.g. oxic vs anoxic conditions. Whenever possible, the effect of radiation from the waste form on the interactions is examined. The interactions are evaluated based on their effect on the release and speciation of various elements including radionuclides from the glass. It is noted when further tests of repository interactions are needed before long-term predictions can be made. 63 references, 1 table

  7. Variational principles for collective motion: Relation between invariance principle of the Schroedinger equation and the trace variational principle

    International Nuclear Information System (INIS)

    Klein, A.; Tanabe, K.

    1984-01-01

    The invariance principle of the Schroedinger equation provides a basis for theories of collective motion with the help of the time-dependent variational principle. It is formulated here with maximum generality, requiring only the motion of intrinsic state in the collective space. Special cases arise when the trial vector is a generalized coherent state and when it is a uniform superposition of collective eigenstates. The latter example yields variational principles uncovered previously only within the framework of the equations of motion method. (orig.)

  8. Thermal performance of solar air collection-storage system with phase change material based on flat micro-heat pipe arrays

    International Nuclear Information System (INIS)

    Wang, Teng-yue; Diao, Yan-hua; Zhu, Ting-ting; Zhao, Yao-hua; Liu, Jing; Wei, Xiang-qian

    2017-01-01

    Highlights: • A new type of solar air collection-storage thermal system with PCM is proposed. • Flat micro-heat pipe array is used as the core heat transfer element. • Air volume flow rate influence charging and discharging time obviously. • Air-side thermal resistance dominates during charging and discharging. - Abstract: In this study, a new type of solar air collection-storage thermal system (ACSTS) with phase change material (PCM) is designed using flat micro-heat pipe arrays (FMHPA) as the heat transfer core element. The solar air collector comprises FMHPA and vacuum tubes. The latent thermal storage device (LTSD) utilizes lauric acid, which is a type of fatty acid, as PCM. The experiments test the performance of collector efficiency and charging and discharging time of thermal storage device through different air volume flow rates. After a range of tests, high air volume flow rate is concluded to contribute to high collector efficiency and short charging and discharging time and enhance instantaneous heat transfer, whereas an air volume flow rate of 60 m"3/h during discharging provides a steady outlet temperature. The cumulative heat transfer during discharging is between 4210 and 4300 kJ.

  9. Relative translucency of six all-ceramic systems. Part II: core and veneer materials.

    Science.gov (United States)

    Heffernan, Michael J; Aquilino, Steven A; Diaz-Arnold, Ana M; Haselton, Debra R; Stanford, Clark M; Vargas, Marcos A

    2002-07-01

    STATEMENT OF PROBLEM All-ceramic core materials with various strengthening compositions have a range of translucencies. It is unknown whether translucency differs when all-ceramic materials are fabricated similarly to the clinical restoration with a veneered core material. This study compared the translucency of 6 all-ceramic materials veneered and glazed at clinically appropriate thicknesses. Core specimens (n = 5 per group) of Empress dentin, Empress 2 dentin, In-Ceram Alumina, In-Ceram Spinell, In-Ceram Zirconia, and Procera AllCeram were fabricated as described in Part I of this study and veneered with their corresponding dentin porcelain to a final thickness of 1.47 +/- 0.01 mm. These specimens were compared with veneered Vitadur Alpha opaque dentin (as a standard), a clear glass disc (positive control), and a high-noble metal-ceramic alloy (Porc. 52 SF) veneered with Vitadur Omega dentin (negative control). Specimen reflectance was measured with an integrating sphere attached to a spectrophotometer across the visible spectrum (380 to 700 nm); 0-degree illumination and diffuse viewing geometry were used. Measurements were repeated after a glazing cycle. Contrast ratios were calculated from the luminous reflectance (Y) of the specimens with a black (Yb) and a white backing (Yw) to give Yb/Yw with CIE illuminant D65 and a 2-degree observer function (0.0 = transparent, 1.0 = opaque). One-way analysis of variance and Tukey's multiple-comparison test were used to analyze the data (P<.05). Significant differences in contrast ratios were found among the ceramic systems tested when they were veneered (P<.0001) and after the glazing cycle (P<.0001). Significant changes in contrast ratios (P<.0001) also were identified when the veneered specimens were glazed. Within the limitations of this study, a range of translucency was identified in the veneered all-ceramic systems tested. Such variability may affect their ability to match natural teeth. The glazing cycle resulted

  10. Factors affecting the wettability of different surface materials with vegetable oil at high temperatures and its relation to cleanability

    Energy Technology Data Exchange (ETDEWEB)

    Ashokkumar, Saranya, E-mail: saras@food.dtu.dk [Accoat A/S, Munkegardsvej 16, 3490 Kvistgard (Denmark); Food Production Engineering, DTU FOOD, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark); Adler-Nissen, Jens [Food Production Engineering, DTU FOOD, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark); Moller, Per [Department of Materials Science and Engineering, DTU Mechanical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark)

    2012-12-15

    Graphical abstract: Plot of cos {theta} versus temperature for metal and ceramic surfaces where cos {theta} rises linearly with increase in temperature. Highlights: Black-Right-Pointing-Pointer cos {theta} of olive oil on different surface materials rises linearly with increase in temperature. Black-Right-Pointing-Pointer Slopes are much higher for quasicrystalline and polymers than for ceramics. Black-Right-Pointing-Pointer Increase in surface roughness and surface flaws increases surface wettability. Black-Right-Pointing-Pointer Contact angle values gave information for grouping easy-clean polymers from other materials. Black-Right-Pointing-Pointer Contact angle measurements cannot directly estimate the cleanability of a surface. - Abstract: The main aim of the work was to investigate the wettability of different surface materials with vegetable oil (olive oil) over the temperature range of 25-200 Degree-Sign C to understand the differences in cleanability of different surfaces exposed to high temperatures in food processes. The different surface materials investigated include stainless steel (reference), PTFE (polytetrafluoroethylene), silicone, quasicrystalline (Al, Fe, Cr) and ceramic coatings: zirconium oxide (ZrO{sub 2}), zirconium nitride (ZrN) and titanium aluminum nitride (TiAlN). The ceramic coatings were deposited on stainless steel with two different levels of roughness. The cosine of the contact angle of olive oil on different surface materials rises linearly with increasing temperature. Among the materials analyzed, polymers (PTFE, silicone) gave the lowest cos {theta} values. Studies of the effect of roughness and surface flaws on wettability revealed that the cos {theta} values increases with increasing roughness and surface flaws. Correlation analysis indicates that the measured contact angle values gave useful information for grouping easy-clean polymer materials from the other materials; for the latter group, there is no direct relation between

  11. Identification of exponent from load-deformation relation for soft materials from impact tests

    Science.gov (United States)

    Ciornei, F. C.; Alaci, S.; Romanu, I. C.; Ciornei, M. C.; Sopon, G.

    2018-01-01

    When two bodies are brought into contact, the magnitude of occurring reaction forces increase together with the amplitude of deformations. The load-deformation dependency of two contacting bodies is described by a function having the form F = Cxα . An accurate illustration of this relationship assumes finding the precise coefficient C and exponent α. This representation proved to be very useful in hardness tests, in dynamic systems modelling or in considerations upon the elastic-plastic ratio concerning a Hertzian contact. The classical method for identification of the exponent consists in finding it from quasi-static tests. The drawback of the method is the fact that the accurate estimation of the exponent supposes precise identification of the instant of contact initiation. To overcome this aspect, the following observation is exploited: during an impact process, the dissipated energy is converted into heat released by internal friction in the materials and energy for plastic deformations. The paper is based on the remark that for soft materials the hysteresis curves obtained for a static case are similar to the ones obtained for medium velocities. Furthermore, utilizing the fact that for the restitution phase the load-deformation dependency is elastic, a method for finding the α exponent for compression phase is proposed. The maximum depth of the plastic deformations obtained for a series of collisions, by launching, from different heights, a steel ball in free falling on an immobile prism made of soft material, is evaluated by laser profilometry method. The condition that the area of the hysteresis loop equals the variation of kinetical energy of the ball is imposed and two tests are required for finding the exponent. Five collisions from different launching heights of the ball were taken into account. For all the possible impact-pair cases, the values of the exponent were found and close values were obtained.

  12. Relative translucency of six all-ceramic systems. Part I: core materials.

    Science.gov (United States)

    Heffernan, Michael J; Aquilino, Steven A; Diaz-Arnold, Ana M; Haselton, Debra R; Stanford, Clark M; Vargas, Marcos A

    2002-07-01

    All-ceramic restorations have been advocated for superior esthetics. Various materials have been used to improve ceramic core strength, but it is unclear whether they affect the opacity of all-ceramic systems. This study compared the translucency of 6 all-ceramic system core materials at clinically appropriate thicknesses. Disc specimens 13 mm in diameter and 0.49 +/- 0.01 mm in thickness were fabricated from the following materials (n = 5 per group): IPS Empress dentin, IPS Empress 2 dentin, In-Ceram Alumina core, In-Ceram Spinell core, In-Ceram Zirconia core, and Procera AllCeram core. Empress and Empress 2 dentin specimens also were fabricated and tested at a thickness of 0.77 +/- 0.02 mm (the manufacturer's recommended core thickness is 0.8 mm). A high-noble metal-ceramic alloy (Porc. 52 SF) served as the control, and Vitadur Alpha opaque dentin was used as a standard. Sample reflectance (ratio of the intensity of reflected light to that of the incident light) was measured with an integrating sphere attached to a spectrophotometer across the visible spectrum (380 to 700 nm); 0-degree illumination and diffuse viewing geometry were used. Contrast ratios were calculated from the luminous reflectance (Y) of the specimens with a black (Yb) and a white (Yw) backing to give Yb/Yw with CIE illuminant D65 and a 2-degree observer function (0.0 = transparent, 1.0 = opaque). One-way analysis of variance and Tukey's multiple-comparison test were used to analyze the data (P In-Ceram Spinell > Empress, Procera, Empress 2 > In-Ceram Alumina > In-Ceram Zirconia, 52 SF alloy.

  13. Universal properties of materials with the Dirac dispersion relation of low-energy excitations

    Energy Technology Data Exchange (ETDEWEB)

    Protogenov, A. P., E-mail: alprot@appl.sci-nnov.ru [Russian Academy of Sciences, Institute for Applied Physics (Russian Federation); Chulkov, E. V. [Universidad del Pais Vasco, Departamento de Fisica de Materiales (Spain)

    2015-12-15

    The N-terminal scheme is considered for studying the contribution of edge states to the response of a two-dimensional topological insulator. A universal distribution of the nonlocal resistance between terminals is determined in the ballistic transport approach. The calculated responses are identical to experimentally observed values. The spectral properties of surface electronic states in Weyl semimetals are also studied. The density of surface states is accurately determined. The universal behavior of these characteristics is a distinctive feature of the considered Dirac materials which can be used in practical applications.

  14. Universal properties of materials with the Dirac dispersion relation of low-energy excitations

    International Nuclear Information System (INIS)

    Protogenov, A. P.; Chulkov, E. V.

    2015-01-01

    The N-terminal scheme is considered for studying the contribution of edge states to the response of a two-dimensional topological insulator. A universal distribution of the nonlocal resistance between terminals is determined in the ballistic transport approach. The calculated responses are identical to experimentally observed values. The spectral properties of surface electronic states in Weyl semimetals are also studied. The density of surface states is accurately determined. The universal behavior of these characteristics is a distinctive feature of the considered Dirac materials which can be used in practical applications

  15. Magnetic-field-free thermoelectronic power conversion based on graphene and related two-dimensional materials

    Science.gov (United States)

    Wanke, R.; Hassink, G. W. J.; Stephanos, C.; Rastegar, I.; Braun, W.; Mannhart, J.

    2016-06-01

    Mobile energy converters require, in addition to high conversion efficiency and low cost, a low mass. We propose to utilize thermoelectronic converters that use 2D-materials such as graphene for their gate electrodes. Deriving the ultimate limit for their specific energy output, we show that the positive energy output is likely close to the fundamental limit for any conversion of heat into electric power. These converters may be valuable as electric power sources of spacecraft, and with the addition of vacuum enclosures, for power generation in electric planes and cars.

  16. Regulatory problems relating to physical protection of nuclear plants and materials in Italy

    International Nuclear Information System (INIS)

    Nocera, F.

    1981-10-01

    Although the questions raised by physical protection have an international charater, it is important to know of national regulations in that field since exchange of information and study of common problems help to achieve satisfactory results. This paper analyses the Italian situation, by illustrating legislative and administrative actions undertaken as well as the practices adopted in Italy to meet problems of prevention of malevolent acts against nuclear installations and substances, until such time an Act is passed in this respect. Finally, the author is in favour of the 1980 Convention of Physical Protection of Nuclear Material being ratified soon by a large number of countries. (NEA) [fr

  17. EI Scale: an environmental impact assessment scale related to the construction materials used in the reinforced concrete

    Directory of Open Access Journals (Sweden)

    Gilson Morales

    2010-12-01

    Full Text Available This study aimed to create EI Scal, an environmental impact assessment scal, related to construction materials used in the reinforced concrete structure production. The main reason for that was based on the need to classify the environmental impact levels through indicators to assess the damage level process. The scale allowed converting information to estimate the environmental impact caused. Indicators were defined trough the requirements and classification criteria of impact aspects considering the eco-design theory. Moreover, the scale allowed classifying the materials and processes environmental impact through four score categories which resulted in a single final impact score. It was concluded that the EI scale could be cheap, accessible, and relevant tool for environmental impact controlling and reduction, allowing the planning and material specification to minimize the construction negative effects caused in the environment.

  18. A multi-scale model for structure-property relations of materials exhibiting martensite transformation plasticity

    NARCIS (Netherlands)

    Kouznetsova, V.; Balmachnov, A.; Geers, M.G.D.

    2009-01-01

    The remarkable mechanical properties of many advanced steels, e.g. metastable austenitic stainless steels, are related to their complex microstructural behaviour, resulting from the interaction between plastic deformation of the phases and the austenite to martensite phase transformation during

  19. Estimating material parameters of a structurally based constitutive relation for skin mechanics

    KAUST Repository

    Jor, Jessica W. Y.; Nash, Martyn P.; Nielsen, Poul M. F.; Hunter, Peter J.

    2010-01-01

    This paper presents a structurally based modeling framework to characterize the structure-function relation in skin tissues, based upon biaxial tensile experiments performed in vitro on porcine skin. Equi-axial deformations were imposed

  20. Evaluation of concrete pavements with materials-related distress : appendix B.

    Science.gov (United States)

    2010-02-02

    An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

  1. Evaluation of concrete pavements with materials-related distress : appendix C.

    Science.gov (United States)

    2010-03-02

    An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

  2. Environmental Degradation of Materials: Surface Chemistry Related to Stress Corrosion Cracking

    Science.gov (United States)

    Schwarz, J. A.

    1985-01-01

    Parallel experiments have been performed in order to develop a comprehensive model for stress cracking (SCC) in structural materials. The central objective is to determine the relationship between the activity and selectivity of the microstructure of structural materials to their dissolution kinetics and experimentally measured SCC kinetics. Zinc was chosen as a prototype metal system. The SCC behavior of two oriented single-crystal disks of zinc in a chromic oxide/sodium sulfate solution (Palmerton solution) were determined. It was found that: (1) the dissolution rate is strongly (hkil)-dependent and proportional to the exposure time in the aggressive environment; and (2) a specific slip system is selectively active to dissolution under applied stress and this slip line controls crack initiation and propagation. As a precursor to potential microgrvity experiments, electrophoretic mobility measurements of zinc particles were obtained in solutions of sodium sulfate (0.0033 M) with concentrations of dissolved oxygen from 2 to 8 ppm. The equilibrium distribution of exposed oriented planes as well as their correlation will determine the particle mobility.

  3. Methods of assessment of individual and collective doses to transport workers and members of the public during the transport of radioactive materials. Part of a coordinated programme on safe transport of radioactive material

    International Nuclear Information System (INIS)

    Vohra, K.G.

    1983-12-01

    A study in India, partially supported by an IAEA research contract, provided measurements of exposure to transport workers associated with the transport of radioisotopes for medical, industry and research purposes. A survey showed this to be the single most significant source of transport worker exposure in India. The largest exposures were found with transport workers at the Bombay airport through which these packages are ''funnelled''. The maximum occupational doses were found to be between 1.8 and 2.0 mSv/y assuming only four men handle all of the packages throughout the year. Furthermore, it was found that the surface transport of these materials in the Bombay area results in an estimated maximum annual collective dose to the public of only 0.1 man Sv/y. It was further noted that this collective dose results not from high radiation levels but from the high population density involved in the Bombay area. The model provides reasonable correlation with the measured data, but it was indicated that additional testing of the model needed to be performed. The data indicate a correlation between persons preparing the packages and persons handling the packages in transport. It was not possible to derive a simple empirical model based solely on Transport Index

  4. Alternative approaches of SiC and related wide bandgap materials in light emitting and solar cell applications

    International Nuclear Information System (INIS)

    Wellman, P; Syväjärvi, M; Ou, H

    2014-01-01

    silicon oxycarbide material can provide potential applications of the Eu luminescent materials to challenging conditions like high temperatures or aggressive environments where the silica has weaknesses. In some approaches, silicon rich silicon oxide that contain silicon nanoclusters emit red to near infrared luminescence due to quantum confinement effects while luminescence at shorter wavelength is difficult due to the interplay of defects and quantum confinement effects. In addition it is applicable as low-k dielectric, etch-stop and passivation layers. It also has an optical band-gap that is smaller than that of SiO2 which may facilitate carrier injection at lower voltages that is suitable for optoelectronics. From materials perspective of emerging materials, it seems distant to consider system related issues. The future demands on communication and lighting devices require higher information flows in modernized optical devices, for example by replacing electrical interconnects with their optical counterparts and tunable backgrounds filters for integrated optics or photonics applications. However, there are materials issues related to such device performance, for example by a non-linearity, that provide the possibility for selective removal or addition of wavelengths using hetero structures in which one side of the structure enhances the light-to-dark sensitivity of long and medium wavelength channels and diminish others, and an opposite behavior in other face of the structure. Certainly materials may be applied in various innovative ways to provide new performances in devices and systems. In any materials and device evaluation, reliability issues in passivation and packaging of semiconductor device structures provide a base knowledge that may be used to evaluate new concepts. Fundamental aspects of dielectric constant, bandgap and band offsets between the valence and conduction band edges between the passivation layer and the semiconductor create a foundation for

  5. 77 FR 6861 - Agency Information Collection Activity; Proposed Collection

    Science.gov (United States)

    2012-02-09

    ... 1995, Public Law 104-13(44 U.S.C. 3506(c)(2)(A)). DATES: Written comments should be received on or... OMB control number. Books or records relating to a collection of information must be retained as long as their contents may become material in the administration of any internal revenue law. Generally...

  6. Investigational research on highly functional carbon and related materials (HF-CRMs); Tansokei kokino zairyo no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper arranged a fiscal 1997 guiding study of highly functional carbon and related materials (HF-CRMs). In the material invention field, described were the composition by interatomic control technology and the characteristics of pure carbon nanotubes, carbynes, graphite, fullerene polymer, porous carbon, etc. Heteroelement substituted materials were also described. The paper also reported the application of HF-CRMs to the electric/chemical field, and arranged the basement technology and applicability of diamond in particular. The subjects are enhancement of composition technology and reduction of the price of processing technology. Especially, the control of impurities and defects is a must for the electric use. The application of HF-CRMs to the mechanical field was reported. Superlubricant, wear resistant and high temperature corrosion resistant materials were taken up, and were surveyed in terms of their use mostly to refuse incineration power generation boilers, and thermal power generation use turbines. In the development of mechanical materials, technologies were surveyed especially for large area/complex shape film formation to form films for various parts, functionally gradient film formation for relaxation of thermal stress and residual stress in the film, and high speed film formation for quantity production. 363 refs., 88 figs., 10 tabs.

  7. Model development of SAS4A and investigation on the initiating phase consequences in LMFRs related with material motion

    International Nuclear Information System (INIS)

    Niwa, H.

    1994-01-01

    This paper focuses on an analytical aspect of the initiating phase scenario and consequences of postulated core disruptive accident in liquid-metal-cooled fast breeder reactors. An analytical code, SAS4A, has been developed at Argonne National Laboratory, and introduced to PNC. Improvement and validation effort have been performed for the mixed-oxide version of SAS4A at PNC. This paper describes firstly recent development of SAS4A's material motion related models briefly. A fission gas mass transfer model and solid fuel chunk jamming model are developed and introduced to SAS4A, and validated using CABRI-2 E13 experimental data. Secondly, an investigation of the mechanism of energetics in the initiating phase of an unprotected loss-of-flow accident has identified major control parameters which are intimately related to core design parameters and material motion phenomena. (author)

  8. Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: A critical assessment.

    Science.gov (United States)

    Straffelini, Giovanni; Ciudin, Rodica; Ciotti, Alessandro; Gialanella, Stefano

    2015-12-01

    This critical review presents several aspects related to the use of copper as a main component in brake pads in road vehicles. The compositions of these materials are attracting increasing interest and concern due to the relative contribution of wear products to particulate matter emissions in the environment as a result of braking action even though there has been a reduction in exhaust products from internal combustion engines. We review the data on the main wear mechanisms in brake systems and highlight the positive role of copper. However, similar to other heavy metal emissions, even the release of copper into the atmosphere may have important environmental and health effects. Thus, several replacement strategies are being pursued, and the positive and negative features will be critically reviewed. Additionally, the future perspectives in materials development will be discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Survey of trace elements in coals and coal-related materials by neutron activation analysis

    International Nuclear Information System (INIS)

    Ruch, R.R.; Cahill, R.A.; Frost, J.K.; Camp, L.R.; Gluskoter, H.J.

    1977-01-01

    Utilizing primarily instrumental neutron activation analysis and other analytical methods such as neutron-activation analysis with radiochemical separation, emission spectrochemical analysis, atomic absorption spectroscopy, X-ray fluorescence analysis, ion-selective electrode analysis, and American Society for Testing of Materials procedures (ASTM), as many as 61 elements were quantitatively surveyed in 170 U.S. whole coals, 70 washed coals, and 40 bench samples. Data on areal and vertical distributions in various regions were obtained along with extensive information on the mode of occurence of various elements in the coal matrix itself. Efforts have been made to attain the maximal accuracy and precision possible for a wide variety of elements in the inhomogeneous coal matrix. (T.G.)

  10. Improvements in or relating to the production of metal-containing material in particulate form

    International Nuclear Information System (INIS)

    Woodhead, J.L.; Scott, K.T.B.; Ball, P.W.

    1977-01-01

    The process described refers mainly to production of the material in the form of very small spheres. It comprises forming a metal compound-containing gel precipitate by mixing a solution or sol of the metal compound with a soluble organic polymer and contacting the mixture with a precipitating reagent to precipitate the metal as an insoluble compound bound with the polymer. The precipitate is then subjected in the liquid phase to a breaking down and dispersing process to produce an intermediate product suitable for spray drying, and the intermediate product is spray dried to form the particulate product. The breaking down and dispersing process may be performed by means of a colloid mill or vibratory stirrer. Examples of application of the process are described. (U.K.)

  11. EI Scale: an environmental impact assessment scale related to the construction materials used in the reinforced concrete

    OpenAIRE

    Gilson Morales; Antonio Edésio Jungles; Sheila Elisa Scheidemantel Klein; Juliana Guarda

    2010-01-01

    This study aimed to create EI Scal, an environmental impact assessment scal, related to construction materials used in the reinforced concrete structure production. The main reason for that was based on the need to classify the environmental impact levels through indicators to assess the damage level process. The scale allowed converting information to estimate the environmental impact caused. Indicators were defined trough the requirements and classification criteria of impact aspects consid...

  12. Consumer Law-Related Education Materials (Grades 4-7). Okeechobee County.

    Science.gov (United States)

    Allen, Rodney F., Ed.; Landry, Russell H., Ed.

    These teacher-developed learning activities for grades 4-7 deal with consumer law-related topics. The self-contained activities are organized into five sections. Section one contains a role-playing card game that helps students examine rules and feelings. For example, one role-playing situation involves a confrontation between a student and a bus…

  13. Inapplicability of the Maxwell relation for the quantification of caloric effects in anisotropic ferroic materials

    Czech Academy of Sciences Publication Activity Database

    Niemann, R.; Heczko, Oleg; Schultz, L.; Fähler, S.

    2014-01-01

    Roč. 37, SI (2014), 281-288 ISSN 0140-7007 R&D Projects: GA ČR(CZ) GAP107/11/0391 Institutional support: RVO:68378271 Keywords : magnetocaloric * shape memory alloy s * multiferroic * Ni-Mn-Ga * Maxwell relation Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.241, year: 2014

  14. A Typology of Agency in New Generation Learning Environments: Emerging Relational, Ecological and New Material Considerations

    Science.gov (United States)

    Charteris, Jennifer; Smardon, Dianne

    2018-01-01

    The impetus to move to a new generation learning environments places a spotlight on the relational dynamics of classroom spaces. A key feature is the notion of learner agency. A complex notion, learner agency involves both compliance with and resistance to classroom norms and therefore is far more sophisticated than acting in acquiescence to…

  15. Structural Relations of Personal and Collective Self-Esteem to Subjective Well-Being: Attachment as Moderator

    Science.gov (United States)

    Simsek, Omer Faruk

    2013-01-01

    A model indicating that the relationship between collective self-esteem and indicators of subjective well-being, happiness and life satisfaction, was mediated by personal self-esteem was tested by structural equation modeling. The model, including all participants, fitted well to the data. The results suggested that the relationship of collective…

  16. Reflections on the individual–collective relation in change agency formation in the Samsø renewable energy island project

    DEFF Research Database (Denmark)

    Carlsson, Monica Susanne

    2018-01-01

    This paper offers reflections on change agency formation in the Renewable Energy Island (REI) project on Samsø, following a field visit to the island in June 2016. Both individual and collective agency are set out as central for the processes leading to the change in the REI project, spurring ref...

  17. Research progress of perovskite materials in photocatalysis- and photovoltaics-related energy conversion and environmental treatment.

    Science.gov (United States)

    Wang, Wei; Tadé, Moses O; Shao, Zongping

    2015-08-07

    Meeting the growing global energy demand is one of the important challenges of the 21st century. Currently over 80% of the world's energy requirements are supplied by the combustion of fossil fuels, which promotes global warming and has deleterious effects on our environment. Moreover, fossil fuels are non-renewable energy and will eventually be exhausted due to the high consumption rate. A new type of alternative energy that is clean, renewable and inexpensive is urgently needed. Several candidates are currently available such as hydraulic power, wind force and nuclear power. Solar energy is particularly attractive because it is essentially clean and inexhaustible. A year's worth of sunlight would provide more than 100 times the energy of the world's entire known fossil fuel reserves. Photocatalysis and photovoltaics are two of the most important routes for the utilization of solar energy. However, environmental protection is also critical to realize a sustainable future, and water pollution is a serious problem of current society. Photocatalysis is also an essential route for the degradation of organic dyes in wastewater. A type of compound with the defined structure of perovskite (ABX3) was observed to play important roles in photocatalysis and photovoltaics. These materials can be used as photocatalysts for water splitting reaction for hydrogen production and photo-degradation of organic dyes in wastewater as well as for photoanodes in dye-sensitized solar cells and light absorbers in perovskite-based solar cells for electricity generation. In this review paper, the recent progress of perovskites for applications in these fields is comprehensively summarized. A description of the basic principles of the water splitting reaction, photo-degradation of organic dyes and solar cells as well as the requirements for efficient photocatalysts is first provided. Then, emphasis is placed on the designation and strategies for perovskite catalysts to improve their

  18. Technical Meeting on Fast Reactors and Related Fuel Cycle Facilities with Improved Economic Characteristics. Working Material

    International Nuclear Information System (INIS)

    2013-01-01

    The objectives of the meeting were: - To identify the main issues and technical features that affect capital and energy production costs of fast reactors and related fuel cycle facilities; - To present fast reactor concepts and designs with enhanced economic characteristics, as well as innovative technical solutions (components, subsystems, etc.) that have the potential to reduce the capital costs of fast reactors and related fuel cycle facilities; - To present energy models and advanced tools for the cost assessment of innovative fast reactors and associated nuclear fuel cycles; - To discuss the results of studies and on-going R&D activities that address cost reduction and the future economic competitiveness of fast reactors; and - To identify research and technology development needs in the field, also in view of new IAEA initiatives to help and support Member States in improving the economic competitiveness of fast reactors and associated nuclear fuel cycles

  19. The principles of ultrasound and its application in freezing related processes of food materials: A review.

    Science.gov (United States)

    Cheng, Xinfeng; Zhang, Min; Xu, Baoguo; Adhikari, Benu; Sun, Jincai

    2015-11-01

    Ultrasonic processing is a novel and promising technology in food industry. The propagation of ultrasound in a medium generates various physical and chemical effects and these effects have been harnessed to improve the efficiency of various food processing operations. Ultrasound has also been used in food quality control as diagnostic technology. This article provides an overview of recent developments related to the application of ultrasound in low temperature and closely related processes such as freezing, thawing, freeze concentration and freeze drying. The applications of high intensity ultrasound to improve the efficiency of freezing process, to control the size and size distribution of ice crystals and to improve the quality of frozen foods have been discussed in considerable detail. The use of low intensity ultrasound in monitoring the ice content and to monitor the progress of freezing process has also been highlighted. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Relation of the external mechanical stress to the properties of piezoelectric materials for energy harvesting

    Science.gov (United States)

    Jeong, Soon-Jong; Kim, Min-Soo; Lee, Dae-Su; Song, Jae-Sung; Cho, Kyung-Ho

    2013-12-01

    We investigated the piezoelectric properties and the generation of voltage and power under the mechanical compressive loads for three types of piezoelectric ceramics 0.2Pb(Mg1/3Nb2/3)O3-0.8Pb(Zr0.475Ti0.525)O3 (soft-PZT), 0.1Pb(Mg1/3Sb2/3)O3- 0.9Pb(Zr0.475Ti0.525)O3 (hard-PZT) and [0.675Pb(Mg1/3Nb2/3)O3-0.35PbTiO3]+5 wt% BaTiO3 (textured-PMNT). The piezoelectric d 33 coefficients of all specimens increased with increasing compressive load. The generated voltage and power showed a linear relation and square relation to the applied stress, respectively. These results were larger than those calculated using the simple piezoelectric equation due to the non-linear characteristics of the ceramics, so they were evaluated with a simple model based on a non-linear relation.

  1. Determination of enthalpy–temperature–composition relations in incongruent-melting phase change materials

    International Nuclear Information System (INIS)

    Desgrosseilliers, Louis; Allred, Paul; Groulx, Dominic; White, Mary Anne

    2013-01-01

    This paper demonstrates that liquidus line (T-x) data can be obtained from calorimetric determinations of phase transition enthalpy profiles (H-T) for incongruent-melting phase change materials (PCMs) more efficiently than using traditional cooling curves. An accurate and reliable equilibrium mixture enthalpy model bridges the H-T and T-x gap to provide a full suite of high density H-T-x data to assist latent heat energy storage researchers to evaluate composition-dependent two-phase equilibrium processes. The proposed method is validated for T-history method H-T determinations of 1:1 diluted sodium acetate trihydrate in water, and can also be used with other laboratory calorimetric techniques used to determine the phase transition enthalpy profiles of incongruent-melting compounds. -- Highlights: • H-T data can also be used to obtain valuable liquidus region T-x data. • Applies to all incongruent-melting compounds with known thermodynamic properties. • Reduces the effort and cost of assessing full suite H-T-x data for PCMs. • Uses existing T-x or H-T data of incongruent-melting PCMs to determine the other

  2. High pressure {mu}SR studies: rare earths and related materials

    Energy Technology Data Exchange (ETDEWEB)

    Kalvius, G.M., E-mail: kalvius@ph.tum.de; Schreier, E. [Technical University Munich, Physics Department (Germany)], E-mail: kalvius@ph.tum.de; Ekstroem, M.; Hartmann, O. [Uppsala University, Physics Department (Sweden); Henneberger, S., E-mail: kalvius@ph.tum.de; Kratzer, A. [Technical University Munich, Physics Department (Germany)], E-mail: kalvius@ph.tum.de; Waeppling, R. [Uppsala University, Physics Department (Sweden); Martin, E., E-mail: kalvius@ph.tum.de; Burghart, F.J. [Technical University Munich, Physics Department (Germany)], E-mail: kalvius@ph.tum.de; Ballou, R.; Deportes, J. [CNRS, Laboratoire Louis Neel (France); Niedermayer, Ch. [University of Constance, Faculty of Physics (Germany)

    2000-11-15

    After a short introduction to {mu}SR with respect to the study of magnetic properties, followed by a brief outline of the principle of the high pressure-low temperature {mu}SR spectrometer installed at the Paul Scherrer Institute, we discuss some measurements on rare earth materials employing this instrument. They are concerned with: (1) The pressure dependence of the spin turning process in ferromagnetic Gd. (2) The volume dependence of the internal magnetic field in the heavy rare earth metals Gd, Dy, and Ho in their ordered magnetic states. (3) The response of the (first order) magnetic transition in the frustrated antiferromagnets of type RMn{sub 2} (R = Y,Gd) to pressure. (4) The variation of magnetic parameters with pressure in La{sub 2}CuO{sub 4} (powder sample), the antiferromagnetic parent compound of the high T{sub C} superconductors of type La{sub 2-x}(Sr, Ba){sub x}CuO{sub 4}. In conclusion a short outlook on further developments is given.

  3. Problems in complying with regulations related to low activity materials: Industry, medical, research

    International Nuclear Information System (INIS)

    Steen, J. van der

    1997-01-01

    The new Basic Safety Standards (BSS) for protection against ionizing radiation and for the safety of radiation sources contain nuclide specific exemption levels on reporting. In many cases, these exemption levels differ orders of magnitude, higher or lower, compared to those from the old standards. For the natural radionuclides, the exempted specific activity is much lower (10 or even 1 Bq/g, depending on the radionuclide, compared to 500 Bq/g in the old BSS). As a consequence, industrial activities with certain minerals or raw materials containing elevated concentrations of radionuclides, which were exempted from the radiation protection control system under the old BSS, may have to be declared as radiologically relevant activities and may now come under regulatory control. Examples of these activities are the phosphate ore processing, the refining of a number of metals, the use of slag, and the oil and natural gas production. This might give rise, in some cases, to large volumes of waste which should be treated, conditioned and disposed of in a controlled way. For artificial radionuclides with higher exemption levels, the use of such radionuclides for industrial, medical or research purposes, such as tracers, sealed sources and beta lights, may increase considerably without being controlled any longer by the regulatory system. (author)

  4. Design, synthesis, and characterization of new phosphazene related materials, and study the structure property correlations

    Science.gov (United States)

    Tian, Zhicheng

    The work described in this thesis is divided into three major parts, and all of which involve the exploration of the chemistry of polyphosphazenes. The first part (chapters 2 and 3) of my research is synthesis and study polyphoshazenes for biomedical applications, including polymer drug conjugates and injectable hydrogels for drug or biomolecule delivery. The second part (chapters 4 and 5) focuses on the synthesis of several organic/inorganic hybrid polymeric structures, such as diblock, star, brush and palm tree copolymers using living cationic polymerization and atom transfer radical polymerization techniques. The last part (chapters 6 and 7) is about exploratory synthesis of new polymeric structures with fluorinated side groups or cycloaliphatic side groups, and the study of new structure property relationships. Chapter 1 is an outline of the fundamental concepts for polymeric materials, as such the history, important definitions, and some introductory material for to polymer chemistry and physics. The chemistry and applications of phopshazenes is also briefly described. Chapter 2 is a description of the design, synthesis, and characterization of development of a new class of polymer drug conjugate materials based on biodegradable polyphosphazenes and antibiotics. Poly(dichlorophosphazene), synthesized by a thermal ring opening polymerization, was reacted with up to 25 mol% of ciprofloxacin or norfloxacin and three different amino acid esters (glycine, alanine, or phenylalanine) as cosubstituents via macromolecular substitutions. Nano/microfibers of several selected polymers were prepared by an electrospinning technique. Chapter 3 is concerned with the development of a class of injectable and biodegradable hydrogels based on water-soluble poly(organophosphazenes) containing oligo(ethylene glycol) methyl ethers and glycine ethyl esters. The hydrogels can be obtained by mixing alpha-cyclodextrin aqueous solution and poly(organophosphazenes) aqueous solution in

  5. Readability Assessment of Internet-Based Patient Education Materials Related to Parathyroid Surgery.

    Science.gov (United States)

    Patel, Chirag R; Sanghvi, Saurin; Cherla, Deepa V; Baredes, Soly; Eloy, Jean Anderson

    2015-07-01

    Patient education is critical in obtaining informed consent and reducing preoperative anxiety. Written patient education material (PEM) can supplement verbal communication to improve understanding and satisfaction. Published guidelines recommend that health information be presented at or below a sixth-grade reading level to facilitate comprehension. We investigate the grade level of online PEMs regarding parathyroid surgery. A popular internet search engine was used to identify PEM discussing parathyroid surgery. Four formulas were used to calculate readability scores: Flesch Reading Ease (FRE), Flesch-Kincaid Grade Level (FKGL), Gunning Frequency of Gobbledygook (GFOG), and Simple Measure of Gobbledygook (SMOG). Thirty web-based articles discussing parathyroid surgery were identified. The average FRE score was 42.8 (±1 standard deviation [SD] 16.3; 95% confidence interval [CI], 36.6-48.8; range, 6.1-71.3). The average FKGL score was 11.7 (±1 SD 3.3; 95% CI, 10.5-12.9; range, 6.1-19.0). The SMOG scores averaged 14.2 (±1 SD 2.6; 95% CI, 13.2-15.2; range, 10.7-21.9), and the GFOG scores averaged 15.0 (±1 SD 3.5; 95% CI, 13.7-16.3; range, 10.6-24.8). Online PEM on parathyroid surgery is written above the recommended sixth-grade reading level. Improving readability of PEM may promote better health education and compliance. © The Author(s) 2015.

  6. Calculations on displacement damage and its related parameters for heavy ion bombardment in reactor materials

    International Nuclear Information System (INIS)

    Sone, Kazuho; Shiraishi, Kensuke

    1975-04-01

    The depth distribution of displacement damage expressed in displacements per atom (DPA) in reactor materials such as Mo, Nb, V, Fe and Ni bombarded by energetic nitrogen, argon and self ions with incident energy below 2 MeV was calculated following the theory developed by Lindhard and co-workers for the partition of energy as an energetic ion slowing down. In this calculation, energy loss due to electron excitation was taken into account for the atomic collision cascade after the primary knock-on process. Some parameters indispensable for the calculation such as energy loss rate, damage efficiency, projected range and its straggling were tabulated as a function of incident ion energy of 20 keV to 2 MeV. The damage and parameters were also calculated for 2 MeV nickel ions bombarding Fe targets. In this case, the DPA value is of 40--75% overestimated in a calculation disregarding electronic energy loss for primary knock-on atoms. The formula proposed in this report is significant for calculations on displacement damage produced by heavy ion bombardment as a simulation of high fluence fast neutron damage. (auth.)

  7. Calculations on displacement damage and its related parameters for heavy ion bombardment in reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Sone, K; Shiraishi, K

    1975-04-01

    The depth distribution of displacement damage expressed in displacements per atom (DPA) in reactor materials such as Mo, Nb, V, Fe and Ni bombarded by energetic nitrogen, argon and self ions with incident energy below 2 MeV was calculated following the theory developed by Lindhard and co-workers for the partition of energy as an energetic ion slowing down. In this calculation, energy loss due to electron excitation was taken into account for the atomic collision cascade after the primary knock-on process. Some parameters indispensable for the calculation such as energy loss rate, damage efficiency, projected range and its straggling were tabulated as a function of incident ion energy of 20 keV to 2 MeV. The damage and parameters were also calculated for 2 MeV nickel ions bombarding Fe targets. In this case, the DPA value is of 40--75% overestimated in a calculation disregarding electronic energy loss for primary knock-on atoms. The formula proposed in this report is significant for calculations on displacement damage produced by heavy ion bombardment as a simulation of high fluence fast neutron damage.

  8. Individual self > relational self > collective self-But why? Processes driving the self-hierarchy in self- and person perception.

    Science.gov (United States)

    Nehrlich, Andreas D; Gebauer, Jochen E; Sedikides, Constantine; Abele, Andrea E

    2018-03-25

    The self has three parts: individual, relational, and collective. Typically, people personally value their individual self most, their relational self less, and their collective self least. This self-hierarchy is consequential, but underlying processes have remained unknown. Here, we propose two process accounts. The content account draws upon selves' agentic-communal content, explaining why the individual self is preferred most. The teleology account draws upon selves' instrumentality for becoming one's personal ideal, explaining why the collective self is preferred least. In Study 1 (N = 200, 45% female, M age  = 32.9 years, 79% Caucasian), participants listed characteristics of their three selves (individual, relational, collective) and evaluated those characteristics in seven preference tasks. Additionally, we analyzed the characteristics' agentic-communal content, and participants rated their characteristics' teleological instrumentality. Study 2 (N = 396, 55% female, M age  = 34.5 years, 76% Caucasian) used identical methodology and featured an additional condition, where participants evaluated the selves of a friend. Study 1 reconfirmed the self-hierarchy and supported both process accounts. Study 2 replicated and extended findings. As hypothesized, when people evaluate others' selves, a different self-hierarchy emerges (relational > individual > collective). This research pioneers process-driven explanations for the self-hierarchy, establishing why people prefer different self-parts in themselves than in others. © 2018 Wiley Periodicals, Inc.

  9. Mechanism of plasma-arc formation of fullerenes from coal and related materials

    Energy Technology Data Exchange (ETDEWEB)

    Pang, L S.K.; Wilson, M A; Quezada, R A [CSIRO Petroleum, North Ryde (Australia); and others

    1996-12-31

    When an arc is struck across graphite or coal electrodes in a helium atmosphere several products are formed including soot containing fullerenes. The mechanism by which fullerenes and nanotubes are formed is not understood. At arc temperatures exceeding 3000{degrees}C, highly ordered fullerenes might be expected to be less stable than graphite, and hence fullerene production is believed to proceed in cooler regions at the edge of the arc. There is irrefutable evidence that [C{sub 60}]-fullerene grows in a plasma from atomic carbon vapour or equivalent. When {sup 13}C-labelled carbon powder is packed into the anode, the fullerenes as produced contain a statistical distribution of {sup 13}C atoms. This implies that graphite has split into small units, predominantly C{sub 1} or C{sub 2} in the plasma and these units are involved in fullerene formation. When coal or other organic materials are used in the anode, weaker bonds are present, which may break preferentially. As a result, larger fragments, other than C{sub 1} and C{sub 2} units can exist in the plasma. This paper demonstrates the existence of such larger fragments when various coals are used and this implies that fullerenes can be formed from larger units than C{sub 1} and C{sub 2}. The distribution of polycyclic hydrocarbons formed depends very much on the structure of the coal used for the arcing experiments. The distribution of the natural abundance of {sup 13}C/{sup 12}C ratios in the fullerene products further supports this evidence.

  10. On the importance of organic materials in environmental systems in relation with nuclear waste disposals

    International Nuclear Information System (INIS)

    Moulin, V.; Moulin, C.

    1995-01-01

    The occurrence of humic substances (humic and fulvic acids) in natural systems at different concentration ranges (from some ppm to several hundred ppm) according to the geological environment (crystalline, sedimentary,...) will strongly affect the speciation of radionuclides due to their strong complexing properties towards cations. In order to predict the fate of these radionuclides in conditions relevant to those occurring around nuclear waste disposals in geological formations, the knowledge of the characteristics of the humic materials (occurrence, properties) and their complexing properties towards radionuclides should be assess in order to be able to introduce them into geochemical codes. The methods of extraction, separation and characterisation of humic substances occurring in a granitic environment are presented with results concerning their proportion in the natural water and their main specificities (elementary analysis, size analysis, binding site content,...). The complexation of fluorescent actinide (Cm, U) and lanthanide (Dy) cations with humic substances is investigated through the use of Time-Resolved Laser-Induced Spectrofluorometry (TRLIS) under various experimental conditions (pH (4-7), ionic strength (0.001 M to 0.1 M), cation concentrations (from nM to μM)). Spectrophotometry has been used to study the complexation of a non-fluorescent cation (Np) with humic substances. The principle of these techniques (non-destructive) is based on the titration of the cation by the organic ligand (inducing either a change in the fluorescence signal or a shift in the absorbance spectrum) which allows interaction constant and complexing capacity determination. The results obtained for each cation representative of tri-, penta- and hexavalent actinides of interest for safety assessment of nuclear waste disposals are presented, compared and discussed. From the data here obtained, actinide speciation under conditions relevant to nuclear waste disposal in

  11. Improvements in or relating to the manufacture of compact bodies from particulate material

    International Nuclear Information System (INIS)

    Lefevre, R.L.R.; Barbier, Y.M.J.; Thomas, J.P.; Sturge, D.W.J.

    1976-01-01

    It is stated that a problem arises in the manufacture of compact bodies of nuclear fuel from fuel particles. The particles may comprise spheroidal kernels of sintered UO 2 coated with layers of pyrocarbon and SiC and overcoated with layers of soft graphite. These particles are compressed in dies to form compact bodies, the layers of overcoating deforming to fill the spaces between the fuel particles. When the compact bodies are to be of elongated form pressure is applied axially through rams entering the ends of the die cavity, but this unfortunately leads to a variation in volume loading and matrix density of the particles, so that those particles and associated matrix at the ends of the elongated body are compacted to a higher degree than those at the center. Attempts to rectify this by increasing the pressure of compaction often results in breakage of the particles subjected to the greatest pressure. The method of manufacture described seeks to overcome this difficulty. The material is placed in a shaped die cavity, that partly defines the shape of the body, and is compacted between oppositely acting pairs of rams that extend over the full length of the cavity. Forces are then applied normal to the longitudinal axis of the cavity. The rams are shaped to combine with the cavity to define the shape of the compacted body. The addition of some end-compaction is advantageous, and for this purpose additional forces may be applied in the direction of the longitudinal axis. The die cavity may contain a mandrel arranged so that a hollow compact body is formed by compaction. (U.K.)

  12. Energies of rare-earth ion states relative to host bands in optical materials from electron photoemission spectroscopy

    Science.gov (United States)

    Thiel, Charles Warren

    There are a vast number of applications for rare-earth-activated materials and much of today's cutting-edge optical technology and emerging innovations are enabled by their unique properties. In many of these applications, interactions between the rare-earth ion and the host material's electronic states can enhance or inhibit performance and provide mechanisms for manipulating the optical properties. Continued advances in these technologies require knowledge of the relative energies of rare-earth and crystal band states so that properties of available materials may be fully understood and new materials may be logically developed. Conventional and resonant electron photoemission techniques were used to measure 4f electron and valence band binding energies in important optical materials, including YAG, YAlO3, and LiYF4. The photoemission spectra were theoretically modeled and analyzed to accurately determine relative energies. By combining these energies with ultraviolet spectroscopy, binding energies of excited 4fN-15d and 4fN+1 states were determined. While the 4fN ground-state energies vary considerably between different trivalent ions and lie near or below the top of the valence band in optical materials, the lowest 4f N-15d states have similar energies and are near the bottom of the conduction band. As an example for YAG, the Tb3+ 4f N ground state is in the band gap at 0.7 eV above the valence band while the Lu3+ ground state is 4.7 eV below the valence band maximum; however, the lowest 4fN-15d states are 2.2 eV below the conduction band for both ions. We found that a simple model accurately describes the binding energies of the 4fN, 4fN-1 5d, and 4fN+1 states. The model's success across the entire rare-earth series indicates that measurements on two different ions in a host are sufficient to predict the energies of all rare-earth ions in that host. This information provides new insight into electron transfer transitions, luminescence quenching, and valence

  13. Problems in complying with regulations related to low activity materials: Nuclear fuel cycle issues

    International Nuclear Information System (INIS)

    Coates, R.

    1997-01-01

    The range of issues relating to exemption and clearance within the nuclear fuel cycle is reviewed. It is concluded that current regulatory systems and the underpinning technical criteria are potentially inflexible and over-conservative, resulting in an imbalance in the use of society's resources. Proposals are developed for establishing practical requirements which would ensure that resource allocation is commensurate with the magnitude of the risks and in broad proportion to the other risks affecting society. Such an approach would be consistent with the concept of sustainability and could support wider public acceptance of these issues. Within this approach the practical distinction between exemption and clearance is challenged. (author)

  14. Applications of High Throughput (Combinatorial) Methodologies to Electronic, Magnetic, Optical, and Energy-Related Materials

    Science.gov (United States)

    2013-06-17

    ray beams in transmission geome- try.48 Using 100 nm thick films in the Ce2O3–Al2O3–HfO2 system, they were able to obtain texture , epitaxial relation...is the identification of lead-free, high piezoelectric coefficient replacements for the commonly used compound Pb(Zr,Ti)O3 ( PZT ). Ferroelectric...Fig. 24 shows the variation in the electric-field induced transition in a bulk ceramic composition spread, where a subtle substitution effect of a

  15. Global partnering related to nuclear materials safeguards and security - A pragmatic approach to international safeguards work

    International Nuclear Information System (INIS)

    Stanford, Dennis

    2007-01-01

    This paper documents issues Nuclear Fuel Services, Inc. has addressed in the performance of international work to safeguards and security work. It begins with a description of the package we put together for a sample proposal for the Global Threat Reduction Initiative, for which we were ranked number one for technical approach and cost, and concludes with a discussion of approaches that we have taken to performing this work, including issues related to performing the work as part of a team. The primary focus is on communication, workforce, equipment, and coordination issues. Finally, the paper documents the rules that we use to assure the work is performed safely and successfully. (author)

  16. Hands on what? The relative effectiveness of physical versus virtual materials in an engineering design project by middle school children

    Science.gov (United States)

    Klahr, David; Triona, Lara M.; Williams, Cameron

    2007-01-01

    Hands-on activities play an important, but controversial, role in early science education. In this study we attempt to clarify some of the issues surrounding the controversy by calling attention to distinctions between: (a) type of instruction (direct or discovery); (b) type of knowledge to be acquired (domain-general or domain-specific); and (c) type of materials that are used (physical or virtual). We then describe an empirical study that investigates the relative effectiveness of the physical-virtual dimension. In the present study, seventh and eighth grade students assembled and tested mousetrap cars with the goal of designing a car that would go the farthest. Children were assigned to four different conditions, depending on whether they manipulated physical or virtual materials, and whether they had a fixed number of cars they could construct or a fixed amount of time in which to construct them. All four conditions were equally effective in producing significant gains in learners' knowledge about causal factors, in their ability to design optimal cars, and in their confidence in their knowledge. Girls' performance, knowledge, and effort were equal to boys' in all conditions, but girls' confidence remained below boys' throughout. Given the fact that, on several different measures, children were able to learn as well with virtual as with physical materials, the inherent pragmatic advantages of virtual materials in science may make them the preferred instructional medium in many hands-on contexts.

  17. Physico-Chemical Alternatives in Lignocellulosic Materials in Relation to the Kind of Component for Fermenting Purposes

    Directory of Open Access Journals (Sweden)

    Alberto Coz

    2016-07-01

    Full Text Available The complete bioconversion of the carbohydrate fraction is of great importance for a lignocellulosic-based biorefinery. However, due to the structure of the lignocellulosic materials, and depending basically on the main parameters within the pretreatment steps, numerous byproducts are generated and they act as inhibitors in the fermentation operations. In this sense, the impact of inhibitory compounds derived from lignocellulosic materials is one of the major challenges for a sustainable biomass-to-biofuel and -bioproduct industry. In order to minimise the negative effects of these compounds, numerous methodologies have been tested including physical, chemical, and biological processes. The main physical and chemical treatments have been studied in this work in relation to the lignocellulosic material and the inhibitor in order to point out the best mechanisms for fermenting purposes. In addition, special attention has been made in the case of lignocellulosic hydrolysates obtained by chemical processes with SO2, due to the complex matrix of these materials and the increase in these methodologies in future biorefinery markets. Recommendations of different detoxification methods have been given.

  18. Estimating material parameters of a structurally based constitutive relation for skin mechanics

    KAUST Repository

    Jor, Jessica W. Y.

    2010-11-25

    This paper presents a structurally based modeling framework to characterize the structure-function relation in skin tissues, based upon biaxial tensile experiments performed in vitro on porcine skin. Equi-axial deformations were imposed by stretching circular skin specimens uniformly along twelve directions, and the resultant loads at the membrane attachment points were measured. Displacement fields at each deformation step were tracked using an image 2D cross-correlation technique. A modeling framework was developed to simulate the experiments, whereby measured forces were applied to finite element models that were created to represent the geometry and structure of the tissue samples. Parameters of a structurally based constitutive relation were then identified using nonlinear optimization. Results showed that the ground matrix stiffness ranged from 5 to 32 kPa, fiber orientation mean from 2 to 13. from the torso midline, fiber undulation mean from 1.04 to 1.34 and collagen fiber stiffness from 48 to 366 MPa. It was concluded that the objective function was highly sensitive to the mean orientation and that a priori information about fiber orientation mean was important for the reliable identification of constitutive parameters. © Springer-Verlag 2010.

  19. The importance of building construction materials relative to other factors affecting structure survival during wildfire

    Science.gov (United States)

    Syphard, Alexandra D.; Brennan, Teresa J.; Keeley, Jon E.

    2017-01-01

    Structure loss to wildfire is a serious problem in wildland-urban interface areas across the world. Laboratory experiments suggest that fire-resistant building construction and design could be important for reducing structure destruction, but these need to be evaluated under real wildfire conditions, especially relative to other factors. Using empirical data from destroyed and surviving structures from large wildfires in southern California, we evaluated the relative importance of building construction and structure age compared to other local and landscape-scale variables associated with structure survival. The local-scale analysis showed that window preparation was especially important but, in general, creating defensible space adjacent to the home was as important as building construction. At the landscape scale, structure density and structure age were the two most important factors affecting structure survival, but there was a significant interaction between them. That is, young structure age was most important in higher-density areas where structure survival overall was more likely. On the other hand, newer-construction structures were less likely to survive wildfires at lower density. Here, appropriate defensible space near the structure and accessibility to major roads were important factors. In conclusion, community safety is a multivariate problem that will require a comprehensive solution involving land use planning, fire-safe construction, and property maintenance.

  20. Chemical Composition and Amounts of Mineral Elements in Honeybee-Collected Pollen in Relation to Botanical Origin

    Directory of Open Access Journals (Sweden)

    Taha El-Kazafy Abdou

    2015-06-01

    Full Text Available This study was conducted at the apiary of the Agricultural and Veterinary Training and Research Station, King Faisal University, Al-Ahsa, Saudi Arabia. The purpose was to study the relationship between the botanical origin and chemical composition of bee-collected pollen. The amount of mineral elements present in bee-collected pollen was also studied. The composition of pollen loads showed the maximum contents of dry matter, ash, glucose, fructose, magnesium (Mg, phosphorus (P, and manganese (Mn for the date palm; the maximum contents of protein, calcium (Ca, and zinc (Zn for alfalfa; the maximum contents of fiber, and copper (Cu for the sunflower; the maximum contents of the lipids and iron (Fe for summer squash; and the maximum contents of sodium (Na, and potassium (K for rape. Calcium was found to be correlated in a significantly (p<0.01 positive way with K, Na, Mg, P, Mn, and Zn. Copper, though, was correlated in a significantly (p<0.01 negative way with Ca, Mg, P, Mn, and Zn. The high levels of protein, ash, glucose, and fructose, and low lipid content found in bee-pollen from the date palm and from alfalfa, mean that pollen from the date palm and from alfalfa make an excellent food supplement. It was concluded, that the chemical composition of beecollected pollen can be correlated with the plant species from which pollen was collected.