Use of prioritization in meeting regulatory requirements

International Nuclear Information System (INIS)

Bowling, M.L.; Sommers, D.A.; Girvin, L.M.

1993-01-01

The use of prioritization in the allocation of resources is certainly not a new idea. However, the degree to which prioritization must now be used is much greater than ever before. In the past, utilities generally allocated the necessary resources to meet all regulatory requirements and commitments. Prioritization was then applied to the remaining nonregulatory but required needs. This approach to resource allocation is no longer appropriate for the current and projected economic and operating environment. Key reasons for this conclusion are discussed in this paper by staff from Virginia Power

Regulatory requirements of the integrated technology demonstration program, Savannah River Site (U)

International Nuclear Information System (INIS)

Bergren, C.L.

1992-01-01

The integrated demonstration program at the Savannah River Site (SRS) involves demonstration, testing and evaluation of new characterization, monitoring, drilling and remediation technologies for soils and groundwater impacted by organic solvent contamination. The regulatory success of the demonstration program has developed as a result of open communications between the regulators and the technical teams involved. This open dialogue is an attempt to allow timely completion of applied environmental restoration demonstrations while meeting all applicable regulatory requirements. Simultaneous processing of multiple regulatory documents (satisfying RCRA, CERCLA, NEPA and various state regulations) has streamlined the overall permitting process. Public involvement is achieved as various regulatory documents are advertised for public comment consistent with the site's community relations plan. The SRS integrated demonstration has been permitted and endorsed by regulatory agencies, including the Environmental Protection Agency (EPA) and the South Carolina Department of Health and Environmental Control. EPA headquarters and regional offices are involved in DOE's integrated Demonstration Program. This relationship allows for rapid regulatory acceptance while reducing federal funding and time requirements. (author)

Regulatory and administrative requirements for practice of nuclear medicine in India

International Nuclear Information System (INIS)

Tandon, Pankaj

1998-01-01

In order to ensure safety of the patients, staff and public in the practice of nuclear medicine, including in-vivo diagnostic investigations, radionuclide therapy and in research using unsealed radioactive substances a number of administrative and regulatory procedures are adopted. The salient features of regulatory and administrative requirements for practice of nuclear medicine in India are discussed

Assessment of compliance with regulatory requirements for a best estimate methodology for evaluation of ECCS

Energy Technology Data Exchange (ETDEWEB)

Lee, Un Chul; Jang, Jin Wook; Lim, Ho Gon; Jeong, Ik [Seoul National Univ., Seoul (Korea, Republic of); Sim, Suk Ku [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2000-03-15

Best estimate methodology for evaluation of ECCS proposed by KEPCO(KREM) os using thermal-hydraulic best-estimate code and the topical report for the methodology is described that it meets the regulatory requirement of USNRC regulatory guide. In this research the assessment of compliance with regulatory guide. In this research the assessment of compliance with regulatory requirements for the methodology is performed. The state of licensing procedure of other countries and best-estimate evaluation methodologies of Europe is also investigated, The applicability of models and propriety of procedure of uncertainty analysis of KREM are appraised and compliance with USNRC regulatory guide is assessed.

Mixed Waste Integrated Program emerging technology development

International Nuclear Information System (INIS)

Berry, J.B.; Hart, P.W.

1994-01-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m 3 of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development's Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW

17 CFR 1.52 - Self-regulatory organization adoption and surveillance of minimum financial requirements.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Self-regulatory organization... Miscellaneous § 1.52 Self-regulatory organization adoption and surveillance of minimum financial requirements. (a) Each self-regulatory organization must adopt, and submit for Commission approval, rules...

Galectin-1 is required for the regulatory function of B cells.

Science.gov (United States)

Alhabbab, R; Blair, P; Smyth, L A; Ratnasothy, K; Peng, Q; Moreau, A; Lechler, R; Elgueta, R; Lombardi, G

2018-02-09

Galectin-1 (Gal-1) is required for the development of B cells in the bone marrow (BM), however very little is known about the contribution of Gal-1 to the development of B cell regulatory function. Here, we report an important role for Gal-1 in the induction of B cells regulatory function. Mice deficient of Gal-1 (Gal-1 -/- ) showed significant loss of Transitional-2 (T2) B cells, previously reported to include IL-10 + regulatory B cells. Gal-1 -/- B cells stimulated in vitro via CD40 molecules have impaired IL-10 and Tim-1 expression, the latter reported to be required for IL-10 production in regulatory B cells, and increased TNF-α expression compared to wild type (WT) B cells. Unlike their WT counterparts, T2 and T1 Gal-1 -/- B cells did not suppress TNF-α expression by CD4 + T cells activated in vitro with allogenic DCs (allo-DCs), nor were they suppressive in vivo, being unable to delay MHC-class I mismatched skin allograft rejection following adoptive transfer. Moreover, T cells stimulated with allo-DCs show an increase in their survival when co-cultured with Gal-1 -/- T2 and MZ B cells compared to WT T2 and MZ B cells. Collectively, these data suggest that Gal-1 contributes to the induction of B cells regulatory function.

Analysis of regulatory requirement for beyond design basis events of SMART

International Nuclear Information System (INIS)

Kim, W. S.; Seol, K. W.

2000-01-01

To enhance the safety of SMART reactor, safety and regulatory requirements associated with beyond design basis events (beyond BDE), which were developed and applied to advanced light water reactor designs, were analyzed along with a design status of passive reactor. And, based on these requirements, their applicability on the SMART design was evaluated. In the design aspect, severe accident prevention and mitigation features, containment performance, and accident management were analyzed. The evaluation results show that the requirement related to beyond DBE such as ATWS, loss of residual heat removal during shutdown operation, station blackout, fire, inter-system LOCA, and well-known events from severe accident phenomena is applicable to the SMART design. However, comprehensive approach against beyond DBE is not yet provided in the SMART design, and then it is required to designate and analyze the beyond DBE-related features. This study is expected to contribute to efforts to improve plant safety and to establish regulatory requirements for safety review

17 CFR 249.821 - Form PILOT, information required of self-regulatory organizations operating pilot trading systems...

Science.gov (United States)

2010-04-01

... required of self-regulatory organizations operating pilot trading systems pursuant to § 240.19b-5 of this... Associations § 249.821 Form PILOT, information required of self-regulatory organizations operating pilot trading systems pursuant to § 240.19b-5 of this chapter. This form shall be used by all self-regulatory...

Regulatory objectives, requirements and guidelines for the disposal of radioactive wastes - long-term aspects

International Nuclear Information System (INIS)

1987-01-01

It is the purpose of this document to present the regulatory basis for judging the long-term acceptability of radioactive waste disposal options, assuming that the operational aspects of waste emplacement and facility closure satisfy the existing regulatory framework of requirements. Basic objectives of radioactive waste disposal are given, as are the regulatory requirements which must be satisfied in order to achieve these objectives. In addition, guidelines are given on the application of the radiological requirements to assist proponents in the preparation of submissions to the Atomic Energy Control Board (AECB). The primary focus of the requirements is on radiation protection, although environmental protection and institutional controls are also addressed in a more general way since these factors stem directly from the overall objectives for radioactive waste disposal

Review of light water reactor regulatory requirements: Assessment of selected regulatory requirements that may have marginal importance to risk: Postaccident sampling system, Turbine missiles, Combustible gas control, Charcoal filters

International Nuclear Information System (INIS)

Scott, W.B.; Jamison, J.D.; Stoetzel, G.A.; Tabatabai, A.S.; Vo, T.V.

1987-05-01

In a study commissioned by the Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory (PNL) evaluated the costs and benefits of modifying regulatory requirements in the areas of the postaccident sampling system, turbine rotor design reviews and inspections, combustible gas control for inerted Boiling Water Reactor (BWR) containments, and impregnated charcoal filters in certain plant ventilation systems. The basic framework for the analyses was that presented in the Regulatory Analysis Guidelines (NUREG/BR-0058) and in the Handbook for Value-Impact Assessment (NUREG/CR-3568). The effects of selected modifications to regulations were evaluated in terms of such factors as public risk and costs to industry and NRC. The results indicate that potential modifications of the regulatory requirements in three of the four areas would have little impact on public risk. In the fourth area, impregnated charcoal filters in building ventilation systems do appear to limit risks to the public and plant staff. Revisions in the severe accident source term assumptions, however, may reduce the theoretical value of charcoal filters. The cost analysis indicated that substantial savings in operating costs may be realized by changing the interval of turbine rotor inspections. Small to moderate operating cost savings may be realized through postulated modifications to the postaccident sampling system requirements and to the requirements for combustible gas control in inerted BWR containments. Finally, the use of impregnated charcoal filters in ventilation systems appears to be the most cost-effective method of reducing radioiodine concentrations

Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues

Guidance and methods for satisfying low specific activity material and surface contaminated object regulatory requirements

International Nuclear Information System (INIS)

Pope, R.B.; Shappert, L.B.; Michelhaugh, R.D.; Boyle, R.W.; Easton, E.P.; Coodk, J.R.

1998-01-01

The U.S. Department of Transportation (DOT) and the U.S. Nuclear Regulatory Commission (NRC) have prepared a comprehensive set of draft guidance for shippers and inspectors to use when applying the newly imposed regulatory requirements for low specific activity (LSA) material and surface contaminated objects (SCOs). These requirements represent significant departures in some areas from the manner in which these materials and objects were regulated by the earlier versions of the regulations. The proper interpretation and application of the regulatory criteria can require a fairly complex set of decisions be made. To assist those trying these regulatory requirements, a detailed set of logic-flow diagrams representing decisions related to multiple factors were prepared and included in the draft report for comment on Categorizing and Transporting Low Specific Activity Materials and Surface Contaminated Objects, (DOT/NRC, 1997). These logic-flow diagrams, as developed, are specific to the U.S. regulations, but were readily adaptable to the IAEA regulations. The diagrams have been modified accordingly and tied directly to specific paragraphs in IAEA Safety Series No. 6. This paper provides the logic-flow diagrams adapted in the IAEA regulations, and demonstrated how these diagrams can be used to assist consignors and inspectors in assessing compliance of shipments with the LSA material and SCO regulatory requirements. (authors)

Development of safety-related regulatory requirements for nuclear power in developing countries. Key issue paper no. 4

International Nuclear Information System (INIS)

Han, K.I.

2000-01-01

In implementing a national nuclear power program, balanced regulatory requirements are necessary to ensure nuclear safety and cost competitive nuclear power, and to help gain public acceptance. However, this is difficult due to the technology-intensive nature of the nuclear regulatory requirements, the need to reflect evolving technology and the need for cooperation among multidisciplinary technical groups. This paper suggests approaches to development of balanced nuclear regulatory requirements in developing countries related to nuclear power plant safety, radiation protection and radioactive waste management along with key technical regulatory issues. It does not deal with economic or market regulation of electric utilities using nuclear power. It suggests that national regulatory requirements be developed using IAEA safety recommendations as guidelines and safety requirements of the supplier country as a main reference after careful planning, manpower buildup and thorough study of international and supplier country's regulations. Regulation making is not recommended before experienced manpower has been accumulated. With an option that the supplier country's regulations may be used in the interim, the lack of complete national regulatory requirements should not deter introduction of nuclear power in developing countries. (author)

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-09-15

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered.

An evaluation model for the definition of regulatory requirements on spent fuel pool cooling systems

International Nuclear Information System (INIS)

Izquierdo, J.M.

1979-01-01

A calculation model is presented for establishing regulatory requirements in the SFPCS System. The major design factors, regulatory and design limits and key parameters are discussed. A regulatory position for internal use is proposed. Finally, associated problems and experience are presented. (author)

Economic analysis requirements in support of orbital debris regulatory policy

Science.gov (United States)

Greenberg, Joel S.

1996-10-01

As the number of Earth orbiting objects increases so does the potential for generating orbital debris with the consequent increase in the likelihood of impacting and damaging operating satellites. Various debris remediation approaches are being considered that encompass both in-orbit and return-to-Earth schema and have varying degrees of operations, cost, international competitiveness, and safety implications. Because of the diversity of issues, concerns and long-term impacts, there is a clear need for the setting of government policies that will lead to an orderly abatement of the potential orbital debris hazards. These policies may require the establishment of a supportive regulatory regime. The Department of Transportation is likely to have regulatory responsibilities relating to orbital debris stemming from its charge to protect the public health and safety, safety of property, and national security interests and foreign policy interests of the United States. This paper describes DOT's potential regulatory role relating to orbital debris remediation, the myriad of issues concerning the need for establishing government policies relating to orbital debris remediation and their regulatory implications, the proposed technological solutions and their economic and safety implications. Particular emphasis is placed upon addressing cost-effectiveness and economic analyses as they relate to economic impact analysis in support of regulatory impact analysis.

Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Stevenson, J D

1976-04-01

Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria.

Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

International Nuclear Information System (INIS)

Stevenson, J.D.

1976-01-01

Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria. (Auth.)

Licensing evaluation of CANDU-PHW nuclear power plants relative to U.S. regulatory requirements

International Nuclear Information System (INIS)

Erp, J.B. van

1978-01-01

Differences between the U.S. and Canadian approach to safety and licensing are discussed. U.S. regulatory requirements are evaluated as regards their applicability to CANDU-PHW reactors; vice-versa the CANDU-PHW reactor is evaluated with respect to current Regulatory Requirements and Guides. A number of design modifications are proposed to be incorporated into the CANDU-PHW reactor in order to facilitate its introduction into the U.S. These modifications are proposed solely for the purpose of maintaining consistency within the current U.S. regulatory system and not out of a need to improve the safety of current-design CANDU-PHW nuclear power plants. A number of issues are identified which still require resolution. Most of these issues are concerned with design areas not (yet) covered by the ASME code. (author)

Mixed Waste Integrated Program emerging technology development

Energy Technology Data Exchange (ETDEWEB)

Berry, J.B. [Oak Ridge National Lab., TN (United States); Hart, P.W. [USDOE, Washington, DC (United States)

1994-06-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m{sup 3} of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development`s Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW.

Multicriteria decision methodology for selecting technical alternatives in the Mixed Waste Integrated Program

International Nuclear Information System (INIS)

Ferrada, J.J.; Berry, J.B.

1993-11-01

The US Department of Energy (DOE) Mixed Waste Integrated Program (MWIP) has as one of its tasks the identification of a decision methodology and key decision criteria for the selection methodology. The aim of a multicriteria analysis is to provide an instrument for a systematic evaluation of distinct alternative projects. Determination of this methodology will clarify (1) the factors used to evaluate these alternatives, (2) the evaluator's view of the importance of the factors, and (3) the relative value of each alternative. The selected methodology must consider the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) decision-making criteria for application to the analysis technology subsystems developed by the DOE Office of Technology Development. This report contains a compilation of several decision methodologies developed in various national laboratories, institutions, and universities. The purpose of these methodologies may vary, but the core of the decision attributes are very similar. Six approaches were briefly analyzed; from these six, in addition to recommendations made by the MWIP technical support group leaders and CERCLA, the final decision methodology was extracted. Slight variations are observed in the many methodologies developed by different groups, but most of the analyzed methodologies address similar aspects for the most part. These common aspects were the core of the methodology suggested in this report for use within MWIP for the selection of technologies. The set of criteria compiled and developed for this report have been grouped in five categories: (1) process effectiveness, (2) developmental status, (3) life-cycle cost, (4) implementability, and (5) regulatory compliance

Regulatory requirements for radiation protection

International Nuclear Information System (INIS)

Mason, E.A.; Cunningham, R.E.; Hard, J.E.; Mattson, R.J.; Smith, R.D.; Peterson, H.T. Jr.

1977-01-01

Regulatory requirements for radiation protection have evolved and matured over several decades. Due to the wide adoption of recommendations of the International Commission on Radiation Protection (ICRP), there exists international agreement on the principles to be followed for radiation protection. This foundation will be increasingly important due to the growing need for international agreements and standards for radiation protection and radioactive materials management. During the infancy of the commercial nuclear industry, primary reliance was placed on the protection of the individual, both in the work force and as a member of the public. With the growth of nuclear power in the 1960's and 1970's, environmental impact assessments and expert reviews of bio-effects data have focused attention on statistical risks to large population groups and the use of the collective dose commitment concept to estimate potential effects. The potential release of long-lived radionuclides from the nuclear fuel cycle requires further consideration of radionuclide accumulation in the biosphere and calls for controls conceived and implemented at the international level. The initial development efforts for addressing these concerns already have been instituted by the ICRP and the IAEA. However, formal international agreements and a unified set of international standards may be required to implement the recommendations of these groups. Further international efforts in the field of radiation protection are also called for in developing waste management practices and radioactive effluent control technology, in site selection for fuel reprocessing plants and waste dispersal facilities, and for ensuring safe transport of high-level wastes in various forms. Since the regulation of very low dose rates and doses will be involved, it will be useful to reexamine dose-effect relationships and societal goals for health protection. Improved criteria and methodologies for ''as low as readily

Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

Energy Technology Data Exchange (ETDEWEB)

MULKEY, C.H.

1999-07-06

This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants.

Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants

Regulatory requirement of the Juragua nuclear Power Plant PSA

International Nuclear Information System (INIS)

Valhuerdi Debesa, C.

1996-01-01

Probabilistic Safety Assessment has proved to be a powerful tool for improving the knowledge of the safety insides of Nuclear Power Plants and increasing the efficiency of the safety measures adopted by both operators and regulators. In this paper the regulatory approach adopted in Cuba with regard to the PSA , the scope of the requirement and the basis and proposal of this decision are presented

Continuing education requirements among State Occupational Therapy Regulatory Boards in the United States of America

Directory of Open Access Journals (Sweden)

Savannah R. Hall

2016-10-01

Full Text Available Purpose The purpose of this study is to compare and contrast the contents of each state’s occupational therapy (OT regulatory board requirements regarding licensees’ acquisition of continuing education units in the United States of America. Methods Data related to continuing education requirements from each OT regulatory board of all 50 states and the District of Columbia in the United States were reviewed and categorized by two reviewers. Analysis was conducted based on the categorization of the continuing education requirements and activities required, allowed, and not allowed/not mentioned for continuing education units. Results Findings revealed non-uniformity and inconsistency of continuing education requirements for licensure renewal between OT regulatory boards and was coupled with lack of specific criteria for various continuing education activities. Continuing education requirements were not tailored to meet the needs of individual licensee’s current and anticipated professional role and job responsibilities, with a negative bias towards presentation and publication allowed for continuing education units. Few boards mandated continuing education topics on ethics related to OT practice within each renewal cycle. Conclusion OT regulatory boards should move towards unifying the reporting format of continuing education requirements across all states to reduce ambiguity and to ensure licensees are equipped to provide ethical and competent practice. Efforts could be made to enact continuing education requirements specific to the primary role of a particular licensee. Finally, assigning the amount of continuing education credits to be awarded for different activities should be based on research evidence rather than arbitrary determination.

Information management systems for integrating the technical data and regulatory requirements of environmental restoration activities

International Nuclear Information System (INIS)

Geffen, C.A.; Garrett, B.A.; Walter, M.B.

1990-03-01

Current environmental regulations require that comprehensive planning be conducted before remediating a hazardous waste site to characterize the nature and extent of site contamination, calculate the risk to the public, and assess the effectiveness of various remediation technologies. Remediation of Department of Energy (DOE) sites contaminated with hazardous or mixed wastes will require the effective integration of scientific and engineering data with regulatory and institutional requirements. The information management challenge presented by waste site cleanup activities goes beyond merely dealing with the large quantity of data that will be generated. The information must be stored, managed, and presented in a way that provides some consistency in approach across sites, avoids duplication of effort, and facilitates responses to requests for information from the regulators and the public. This paper provides background information on the regulatory requirements for data gathering and analysis for environmental restoration activities, and outlines the data and information management requirements for completing the pre-remediation phases of an environmental restoration project. Information management systems for integrating the regulatory and institutional requirements of the environmental restoration process with the technical data and analysis requirements are also described. 7 refs

A study on the influence of the regulatory requirements of a nuclear facility during decommissioning activities

Energy Technology Data Exchange (ETDEWEB)

Park, Hee Seong; Park, Seung Kook; Park, Kook Nam; Hong, Yun Jeong; Park, Jang Jin; Choi, Jong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The preliminary decommissioning plan should be written with various chapters such as a radiological characterization, a decommissioning strategy and methods, a design for decommissioning usability, a safety evaluation, decontamination and dismantling activities, radioactive waste management, an environmental effect evaluation, and fire protection. The process requirements of the decommissioning project and the technical requirements and technical criteria should comply with regulatory requirements when dismantling of a nuclear facility. The requirements related to safety in the dismantling of a nuclear facility refer to the IAEA safety serious. The present paper indicates that a decommissioning design and plan, dismantling activities, and a decommissioning project will be influenced by the decommissioning regulatory requirements when dismantling of a nuclear facility. We hereby paved the way to find the effect of the regulatory requirements on the decommissioning of a whole area from the decommissioning strategy to the radioactive waste treatment when dismantling a nuclear facility. The decommissioning requirements have a unique feature in terms of a horizontal relationship as well as a vertical relationship from the regulation requirements to the decommissioning technical requirements. The decommissioning requirements management will be conducted through research that can recognize a multiple relationship in the next stage.

Methods for ensuring compliance with regulatory requirements: regulators and operators

International Nuclear Information System (INIS)

Fleischmann, A.W.

1989-01-01

Some of the methods of ensuring compliance with regulatory requirements contained in various radiation protection documents such as Regulations, ICRP Recommendations etc. are considered. These include radiation safety officers and radiation safety committees, personnel monitoring services, dissemination of information, inspection services and legislative power of enforcement. Difficulties in ensuring compliance include outmoded legislation, financial and personnel constraints

Regulatory Guide 1.79 safety injection recirculation test requirements, fact or fiction

International Nuclear Information System (INIS)

Roberts, J.K.

1976-01-01

The overwhelming concern of the general public in this day of state nuclear initiatives is the basic question, ''is nuclear power safe.'' Much of this concern has focused on the emergency core cooling systems. This public attention spotlights the testing organization's responsibility during startup of proving the operation and reliability of the emergency core cooling systems. The standard established by the Nuclear Regulatory Commission for testing emergency core cooling systems is Regulatory Guide 1.79 ''Preoperational Testing of Emergency Core Cooling Systems for Pressurized Water Reactors''. The nuclear industry must satisfy the testing requirements of Regulatory Guide 1.79 to meet their responsibility to the public; and to prevent future embarrassment when questioned on the adequacy of emergency core cooling systems

Use of probabilistic risk assessments to define areas of possible exemption from regulatory requirements

International Nuclear Information System (INIS)

Thompson, C.A.; Carlson, D.; Kolaczkowski, A.; LaChance, J.

1988-01-01

The Risk-Based Licensing Program (RBLP) was sponsored by the Department of Energy for the purpose of establishing and demonstrating an approach for identifying potential areas for exemption from current regulatory requirements in the licensing of nuclear power plants. Such an approach could assist in the improvement of the regulatory process for both current and future nuclear plant designs. Use of the methodology could result in streamlining the regulatory process by eliminating unnecessarily detailed reviews of portions of a plant design not important to risk. The RBLP methodology utilizes probabilistic risk assessments, (PRAs), which are required of all future applicants for nuclear power plant licenses. PRA results are used as a screening tool to determine the risk significance of various plant features which are correlated to the risk importance of regulations to identify potential areas for regulatory exemption. Additional consideration is then given to non-risk factors in the final determination of exemption candidates. The RBLP methodology was demonstrated using an existing PRA. The results of the demonstration are highlighted. 10 refs

Regulatory requirements for designing PET-CT facility in India

International Nuclear Information System (INIS)

Tandon, Pankaj

2010-01-01

In India, cyclotron-produced radionuclides are gaining importance in molecular imaging in Nuclear Medicine (NM) departments. The importance of this modality among others is due to the fact that it provides valuable clinical information, which was lacking in other available modalities. Presently, every well-established hospital would like to procure Medical Cyclotron or positron emission tomography-computed tomography (PET-CT) facility in their NM department. Because cyclotron-produced radionuclides have higher energy than the other routinely used radionuclides for diagnosis, it becomes essential for the user to know about the regulatory requirement and radiation safety precautions that one has to take for the installation of this new modality in their premises. The various stages of approval of PET-CT facility by the Atomic Energy Regulatory Board (AERB) and important steps that one has to know/follow before planning for this new facility are summarized

Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis; FINAL

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants

Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report

International Nuclear Information System (INIS)

2000-01-01

OAK B188 Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report. The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-formed approach for the design and regulation of nuclear power plants. This approach will include the development and/or confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRS) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go further by focusing on the design of new plants

Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

OAK B188 Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report. The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-formed approach for the design and regulation of nuclear power plants. This approach will include the development and/or confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRS) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go further by focusing on the design of new plants.

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (Spanish Edition)

International Nuclear Information System (INIS)

2010-01-01

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (French Edition)

International Nuclear Information System (INIS)

2010-01-01

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (Chinese Edition)

International Nuclear Information System (INIS)

2010-01-01

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (Arabic Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-09-15

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered.

Regulatory philosophy and requirements for radiation control in Canadian uranium mine-mill facilities

International Nuclear Information System (INIS)

Dory, A.B.

1981-10-01

The approach the Canadian Atomic Energy Control Board takes in licensing uranium mine/mill facilities is based on a minimum of rigidly set regulatory requirements. The regulations state only the basic objectives: the obligation to acquire a licence, some administrative and reporting requirements, and exposure limits. The regulations are supported by a set of regulatory guides. The operator always has the option of following different procedures if he can demonstrate that they will produce the same or better results. Good relationships exist between the AECB and mine management as well as trade unions. Under this approach, however, it is difficult to take action against uncooperative parties. The Board has decided that a somewhat more formalized system is necessary. New regulations are being drafted, giving more detailed licensing and administrative requirements and covering the areas of ventilation and worker and supervisor education more thoroughly

Review of regulatory requirements relevant to calibration of monitoring instruments in research reactors

Energy Technology Data Exchange (ETDEWEB)

Gomaa, Hassan; Khedr, Ahmed; El-Din Talha, Kamal [Egyptian Nuclear and Radiological Regulatory Authority, Cairo (Egypt). Nuclear Safety Engineering Dept.

2015-05-15

The objective of this work is to demonstrate the regulatory requirements pertaining to calibration of monitoring instruments in research reactors. The regulatory statements concerning this subject in IAEA safety standards and the implementation of such regulations in twelve countries with different levels of nuclear programs are surveyed: Australia, Bulgaria, Canada, Egypt, Finland, Germany, Hungary, Slovenia, South Korea, Spain, United Kingdom of England and United States of America. In addition, the requirements of ISO/IEC17025 and NUPIC (Nuclear Utilities Procurement Issues Committee) are compared. Seven technical and administrate aspects are suggested as the comparison criteria and the explicit expression of the statements, the level of document (i.e.: act, requirement or guide) are the considered resources. The main differences and similarities between the different approaches are identified in order to provide an input for future development of the national regulations.

Romanian regulatory requirements on nuclear field specific education needs

International Nuclear Information System (INIS)

Biro, L.; Velicu, O.

2004-01-01

This work is intended as a general presentation of the educational system and research field, with reference to nuclear sciences, and the legal system, with reference to requirements established by the regulatory body for the professional qualification and periodic training of personnel involved in different activities in the nuclear field. Thus, part 2 and 3 of the work present only public information regarding the education in nuclear sciences and nuclear research in Romania; in part 4 the CNCAN requirements for the personnel training, specific to nuclear activities are slightly detailed; part 5 consists of few words about the public information activities in Romania; and part 6 tries to draw a conclusion. (authors)

Regulatory requirements to the thermal-hydraulic and thermal-mechanical computer codes

International Nuclear Information System (INIS)

Vitkova, M.; Kalchev, B.; Stefanova, S.

2006-01-01

The paper presents an overview of the regulatory requirements to the thermal-hydraulic and thermal-mechanical computer codes, which are used for safety assessment of the fuel design and the fuel utilization. Some requirements to the model development, verification and validation of the codes and analysis of code uncertainties are also define. Questions concerning Quality Assurance during development and implementation of the codes as well as preparation of a detailed verification and validation plan are briefly discussed

Method for developing cost estimates for generic regulatory requirements

International Nuclear Information System (INIS)

1985-01-01

The NRC has established a practice of performing regulatory analyses, reflecting costs as well as benefits, of proposed new or revised generic requirements. A method had been developed to assist the NRC in preparing the types of cost estimates required for this purpose and for assigning priorities in the resolution of generic safety issues. The cost of a generic requirement is defined as the net present value of total lifetime cost incurred by the public, industry, and government in implementing the requirement for all affected plants. The method described here is for commercial light-water-reactor power plants. Estimating the cost for a generic requirement involves several steps: (1) identifying the activities that must be carried out to fully implement the requirement, (2) defining the work packages associated with the major activities, (3) identifying the individual elements of cost for each work package, (4) estimating the magnitude of each cost element, (5) aggregating individual plant costs over the plant lifetime, and (6) aggregating all plant costs and generic costs to produce a total, national, present value of lifetime cost for the requirement. The method developed addresses all six steps. In this paper, we discuss on the first three

Federal and state regulatory requirements for decontamination and decommissioning at US Department of Energy Oak Ridge Operations Facilities

International Nuclear Information System (INIS)

Etnier, E.L.; Houlberg, L.M.; Bock, R.E.

1994-06-01

The purpose of this report is to address regulatory requirements for decontamination and decommissioning (D and D) activities at the Oak Ridge Reservation and Paducah Gaseous Diffusion Plant. This report is a summary of potential federal and state regulatory requirements applicable to general D and D activities. Excerpts are presented in the text and tables from the complete set of regulatory requirements. This report should be used as a guide to the major regulatory issues related to D and D. Compliance with other federal, state, and local regulations not addressed here may be required and should be addressed carefully by project management on a site-specific basis. The report summarizes the major acts and implementing regulations (e.g., Resource and Conservation Recovery Act, Clean Air Act, and Toxic Substances Control Act) only with regard to D and D activities. Additional regulatory drivers for D and D activities may be established through negotiated agreements, such as the Federal Facility Agreement and the US Environmental Protection Agency Mixed Waste Federal Facility Compliance Agreement; these are discussed in this report. The DOE orders and Energy Systems procedures also are summarized briefly in instances where they directly apply to D and D

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1, Revision 1 (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This publication establishes requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered. A review of Safety Requirements publications was commenced in 2011 following the accident in the Fukushima Daiichi nuclear power plant in Japan. The review revealed no significant areas of weakness and resulted in just a small set of amendments to strengthen the requirements and facilitate their implementation, which are contained in the present publication.

Regulatory requirements important to Hanford single-shell tank waste management decisions

International Nuclear Information System (INIS)

Keller, J.F.; Woodruff, M.G.

1989-06-01

This report provides an initial analysis of the regulations that may be pertinent to SST management activities (e.g., characterization, disposal, retrieval, processing, etc.) and the interrelationships among those regulations. Waste disposal decisions regarding SST waste must consider the regulatory requirements against which technical solutions will be evaluated. Regulatory requirements can also be used as guidelines for management and disposal of waste in a manner that protects human health and safety and the environment. Also, in cases where waste management regulations do not specifically address a waste form, such as radioactive mixed waste, the SST waste may come under the purview of a number of regulations related to radioactive waste management, hazardous waste management, and water and air quality protection. This report provides a comprehensive review of the environmental pollution control and radioactive waste management statutes and regulations that are relevant to SST waste characterization and management. Also, other statutes and regulations that contain technical standards that may be used in the absence of directly applicable regulations are analyzed. 8 refs., 4 figs

Preparation of safety regulatory requirements for new technology like digital system

International Nuclear Information System (INIS)

2012-01-01

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following two general common positions are discussed and to be issued in this fiscal year. Verification and Validation throughout the life cycle of safety systems using digital computers. The Impact of Cyber Security Features on Digital I and C Safety Systems. (author)

Regulatory quality assurance requirements for the operation of nuclear R and D facilities in Korea

International Nuclear Information System (INIS)

Kwon, H.I.; Lim, N.J.

2006-01-01

Full text: Korea Atomic Energy Research Institute (KAERI) has many R and D facilities in operation. including HANARO research reactor, radioactive waste treatment facility (RWTF), post-irradiation examination facility (PIEF) and irradiated material test facility (IMEF). Recently. nation-wide interest is focused on the safety and security of major industrial facilities. Safe operation of nuclear facilities is imperative because of the consequence of public disaster by radiological release/contamination, in case of an accident. Recently, Ministry of Science and Technology (MOST) of the Korean government announced amendments of Atomic Energy laws to enforce requirements of the physical protection and radiological emergency. All provisions on nuclear safety regulation and radiation protection are entrusted to the Atomic Energy Act(AEA). The Act is enacted as the main law concerning the safety regulation of nuclear installations, and is supplemented by the Enforcement Decree and Enforcement Regulation of the Act. These Atomic Energy laws include provisions on the construction permission and the operation license of nuclear installations, such as nuclear power reactors, research reactors, nuclear ships, nuclear fuel fabrication facilities, spent fuel treatment facilities, etc. Regulatory requirements for the regulatory inspection and the safety measures for operation are also defined in the laws. The Notice of the MOST prescribes specific issues including regulatory requirements and technical standards, as entrusted by the AEA, the Decree and the Regulation. Detailed QA requirements for nuclear installations are specified differently, depending upon the type of facility. The guidelines for safety reviews and regulatory inspections are developed by the Korea Institute of Nuclear Safety (KINS), which is an exclusive organization for safety regulation of nuclear installations in Korea. In this paper, the context of the Atomic Energy laws were reviewed to confirm the

WIPP Waste Characterization: Implementing Regulatory Requirements in the Real World

International Nuclear Information System (INIS)

Cooper Wayman, J.D.; Goldstein, J.D.

1999-01-01

It is imperative to ensure compliance of the Waste Isolation Pilot Project (WIPP) with applicable statutory and regulatory requirements. In particular, compliance with the waste characterization requirements of the Resource Conservation and Recovery Act (RCRA) and its implementing regulation found at 40 CFR Parts 262,264 and 265 for hazardous and mixed wastes, as well as those of the Atomic Energy Act of 1954, as amended, the Reorganization Plan No. 3 of 1970, the Nuclear Waste Policy Act of 1982, as amended, and the WIPP Land Withdrawal Act, as amended, and their implementing regulations found at 40 CFR Parts 191 and 194 for non-mixed radioactive wastes, are often difficult to ensure at the operational level. For example, where a regulation may limit a waste to a certain concentration, this concentration may be difficult to measure. For example, does the definition of transuranic waste (TRU) as 100 nCi/grain of alpha-emitting transuranic isotopes per gram of waste mean that the radioassay of a waste must show a reading of 100 plus the sampling and measurement error for the waste to be a TRU waste? Although the use of acceptable knowledge to characterize waste is authorized by statute, regulation and DOE Orders, its implementation is similarly beset with difficulty. When is a document or documents sufficient to constitute acceptable knowledge? What standard can be used to determine if knowledge is acceptable for waste characterization purposes? The inherent conflict between waste characterization regulatory requirements and their implementation in the real world, and the resolution of this conflict, will be discussed

Preparation of safety regulatory requirements for new technology like digital system

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following four general common positions have been discussed in this fiscal year. The Treatment of Common Cause Failure Resulting from Software within Digital Safety Systems, The Treatment of Hardware Description Language(HDL) Programmed Devices for Use in Nuclear Safety System, Factory Acceptance Test and Site Acceptance Test, The Use of Automatic Tests to Perform Surveilance for Digital Systems. (author)

Regulatory requirements for demonstration of the achieved safety level at the Mochovce NPP before commissioning

International Nuclear Information System (INIS)

Lipar, M.

1997-01-01

A review of regulatory requirements for demonstration of the achieved safety level at the Mochovce NPP before commissioning is given. It contains licensing steps in Slovakia during commissioning; Status and methodology of Mochovce safety analysis report; Mochovce NPP safety enhancement program; Regulatory body policy towards Mochovce NPP safety enhancement; Recent development in Mochovce pre-operational safety enhancement program review and assessment process; Licensing steps in Slovakia during commissioning

Regulatory requirements on the calibration and use of survey instruments

International Nuclear Information System (INIS)

Domondon, D.B.

1989-01-01

Regulatory requirements on the provision, calibration and occasions of use of survey instruments are enumerated for a number of licensed activities. Two methods of calibrating survey instruments are described. Factors that must be taken into consideration in conducting calibrations, contents of calibration reports and of the sticker attached to the instrument which are needed for the correct use of the instrument are discussed. The precautions to be observed in order to insure correct use of survey instruments are described. (Auth.)

A study for the establishment of regulatory requirement and evaluation guide for station blackout in nuclear power plants

International Nuclear Information System (INIS)

Lim, J. H.; Koo, C. S.; Joo, W. P.; Oh, S. H.; Shin, W. K.

1999-01-01

The consequence of SBO event could be a severe accident unless AC power was restored within a proper time, because many safety systems depend upon AC power. Based on the severity, the SBO has been extensively studied since it was identified as Unresolved Safety Issue at USNRC. The resolution of those studies is a rule-making such as 10 CFR 50.63 and Regulatory Guide 1.155. But there is no regulatory requirements of SBO for an operating domestic nuclear power plant up to the present time. This tudy has established SBO rule(regulatory requirements and evaluation guides) for an operating PWR type of the operating nuclear power plants in Korea

Evolution of New cis-Regulatory Motifs Required for Cell-Specific Gene Expression in Caenorhabditis.

Directory of Open Access Journals (Sweden)

Michalis Barkoulas

2016-09-01

Full Text Available Patterning of C. elegans vulval cell fates relies on inductive signaling. In this induction event, a single cell, the gonadal anchor cell, secretes LIN-3/EGF and induces three out of six competent precursor cells to acquire a vulval fate. We previously showed that this developmental system is robust to a four-fold variation in lin-3/EGF genetic dose. Here using single-molecule FISH, we find that the mean level of expression of lin-3 in the anchor cell is remarkably conserved. No change in lin-3 expression level could be detected among C. elegans wild isolates and only a low level of change-less than 30%-in the Caenorhabditis genus and in Oscheius tipulae. In C. elegans, lin-3 expression in the anchor cell is known to require three transcription factor binding sites, specifically two E-boxes and a nuclear-hormone-receptor (NHR binding site. Mutation of any of these three elements in C. elegans results in a dramatic decrease in lin-3 expression. Yet only a single E-box is found in the Drosophilae supergroup of Caenorhabditis species, including C. angaria, while the NHR-binding site likely only evolved at the base of the Elegans group. We find that a transgene from C. angaria bearing a single E-box is sufficient for normal expression in C. elegans. Even a short 58 bp cis-regulatory fragment from C. angaria with this single E-box is able to replace the three transcription factor binding sites at the endogenous C. elegans lin-3 locus, resulting in the wild-type expression level. Thus, regulatory evolution occurring in cis within a 58 bp lin-3 fragment, results in a strict requirement for the NHR binding site and a second E-box in C. elegans. This single-cell, single-molecule, quantitative and functional evo-devo study demonstrates that conserved expression levels can hide extensive change in cis-regulatory site requirements and highlights the evolution of new cis-regulatory elements required for cell-specific gene expression.

Public consultation: regulatory requirement or business principle?

International Nuclear Information System (INIS)

Seeley, R.

1999-01-01

A summary is included of knowledge and experiences related to planning and implementing a public consultation program over a number of years in Shell Canada's Athabasca Oil Sands development. This project consists of three major sub- projects with a total estimated capital investment of $4 billion. The three sub- projects are: the Muskeg River Mine, the Scotford Upgrader, and the Corridor Pipeline. The facilities will produce 150,000 bbl/day of synthetic crude for over 25 years and are targeted to begin production in late 2002. From the title of the paper, although public consultation is required under environmental legislation, many companies are adopting a more pro-active approach to public consultation and participation as a business principle. This commitment to engage in and dialogue with stakeholders must be open, transparent and long term, not just during the regulatory process. Successful consultation begins with the prerequisites: senior management commitment, buy-in from the project or operating team that the process adds value, and the ability to listen and make changes. A consultation program is not a short term activity, but is rather an ongoing process linked to a business or operating principle. It requires long term resources and follow through on agreements and commitments made to stakeholders and communities

Public consultation: regulatory requirement or business principle?

Energy Technology Data Exchange (ETDEWEB)

Seeley, R. [Shell Canada Oil Sands, Calgary, AB (Canada)

1999-07-01

A summary is included of knowledge and experiences related to planning and implementing a public consultation program over a number of years in Shell Canada's Athabasca Oil Sands development. This project consists of three major sub- projects with a total estimated capital investment of $4 billion. The three sub- projects are: the Muskeg River Mine, the Scotford Upgrader, and the Corridor Pipeline. The facilities will produce 150,000 bbl/day of synthetic crude for over 25 years and are targeted to begin production in late 2002. From the title of the paper, although public consultation is required under environmental legislation, many companies are adopting a more pro-active approach to public consultation and participation as a business principle. This commitment to engage in and dialogue with stakeholders must be open, transparent and long term, not just during the regulatory process. Successful consultation begins with the prerequisites: senior management commitment, buy-in from the project or operating team that the process adds value, and the ability to listen and make changes. A consultation program is not a short term activity, but is rather an ongoing process linked to a business or operating principle. It requires long term resources and follow through on agreements and commitments made to stakeholders and communities.

Preparation of safety regulatory requirements for new technology like digital system

International Nuclear Information System (INIS)

Ito, Juichiro; Takita, Masami

2011-01-01

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG (Digital Instrumentation and Control Working Group) of MDEP (Multinational Design Evaluation Program). MDEP DICWG held in OECD/NEA (Organisation for Economic Co-operation and Development/Nuclear Energy Agency) gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance regarding digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed upon process and framework. Five general common positions are under discussion in this fiscal year. Simplicity in Design, Software Common Cause Failures, Software Tools, Data communication, Verification and Validation throughout the life cycle of safety systems using digital computers. In addition, the technical evaluation of standards of the Japan Electric Association about digital system for safety was made to support NISA (Nuclear and Industrial Safety Agency). (author)

Regulatory requirements on PSA level 2: Review, aspects and applications

International Nuclear Information System (INIS)

Husarcek, J.

2003-01-01

The general requirements concerning utility obligations, probabilistic safety criteria (CDF should not exceed 1.0E-4/reactor year and LERF should not exceed 1.0E-5/reactor year), documentation and results, living PSA requirements and major steps in level 2 PSA are presented. PSA developments in Slovakia, collection and assembly of information, plant damage states, containment performance and failure modes, severe accident progression analyses, containment failure modes and source terms as a part of performed level 2 PSA are discussed. The PSA applications in design and operation evaluation, support to plant upgrade and modifications are also described. At the end, the following conclusion is made: more extensive PSA application needs to foster the exchange of experience and communication between PSA specialists, non-PSA engineers, designers, and the regulatory body staff responsible for safety assessment, inspection and enforcement

Report of the working group 'Regulatory requirements on AM - Concept of nuclear and radiation safety during beyond-design-basis accidents'

International Nuclear Information System (INIS)

Bobaly, P.

2001-01-01

The developed working group report contains the following main paragraphs: legal basis and basis for regulatory requirements for on-site and off-site Accident Management (AM), regulatory requirements or recommendations for on-site AM and for emergency preparedness, background information concerning the implementation and review of an AM program as a basis for an AM guideline. Overview about AM/SAM implementation in member countries of the SAMINE project; measure and candidates for high level actions based upon US SAMG; interactions of severe accident research and the regulatory positions, relationship between different components of an accident management programme are also given

Regulatory requirements for nuclear power plant site selection in Malaysia-a review.

Science.gov (United States)

Basri, N A; Hashim, S; Ramli, A T; Bradley, D A; Hamzah, K

2016-12-01

Malaysia has initiated a range of pre-project activities in preparation for its planned nuclear power programme. Clearly one of the first steps is the selection of sites that are deemed suitable for the construction and operation of a nuclear power plant. Here we outline the Malaysian regulatory requirements for nuclear power plant site selection, emphasizing details of the selection procedures and site characteristics needed, with a clear focus on radiation safety and radiation protection in respect of the site surroundings. The Malaysia Atomic Energy Licensing Board (AELB) site selection guidelines are in accord with those provided in International Atomic Energy Agency (IAEA) and United Stated Nuclear Regulatory Commission (USNRC) documents. To enhance the suitability criteria during selection, as well as to assist in the final decision making process, possible assessments using the site selection characteristics and information are proposed.

A framework for regulatory requirements and industry standards for new nuclear power plants

International Nuclear Information System (INIS)

Duran, Felicia A.; Camp, Allen L.; Apostolakis, George E.; Golay, Michael W.

2000-01-01

This paper summarizes the development of a framework for risk-based regulation and design for new nuclear power plants. Probabilistic risk assessment methods and a rationalist approach to defense in depth are used to develop a framework that can be applied to identify systematically the regulations and standards required to maintain the desired level of safety and reliability. By implementing such a framework, it is expected that the resulting body of requirements will provide a regulatory environment that will ensure protection of the public, will eliminate the burden of requirements that do not contribute significantly to safety, and thereby will improve the market competitiveness of new plants. (author)

Regulatory requirements and quality assurance of radiation monitoring instruments

International Nuclear Information System (INIS)

Narasimharao, K.L.; Sharma, Ranjit

2005-01-01

The successful utilisation of radiation sources in the fields of medicine and industry requires the accurate measurement of activity, exposure rate and dose. Many varieties of instruments are in use for measurement of these parameters and new ones are being developed. The criteria for the design of the radiation monitoring instrument include the type and intensity of the radiation, purpose of measurement and ruggedness of the instrument. Quality and reliability of radiation monitoring instruments ensure that individuals are adequately protected. Accuracy, response time and ruggedness are required to be as per the approved/ prescribed guidelines. Regulatory authorities outline the design and performance criteria for radiation monitoring instruments and prescribe the recommendations of international agencies such as IAEA, ICRU and ISO for radiological measurement assurance programme. National Standards Laboratories all over the world prescribe procedures for calibration of various radiation monitoring instruments. The instruments should be calibrated as per these guidelines and should be traceable to national standards. The calibration traceable to national/ international standards and documentation as well as limits stipulated by the competent authority ensures the expected performance of the instrument. (author)

Development of Regulatory Technical Requirements for the Advanced Integral Type Research Reactor

International Nuclear Information System (INIS)

Jo, Jong Chull; Yune, Young Gill; Kim, Woong Sik; Kim, Hho Jung

2004-01-01

This paper presents the current status of the study on the development of regulatory technical requirements for the licensing review of an advanced integral type research reactor of which the license application is expected in a few years. According to the Atomic Energy Act of Korea, both research and education reactors are subject to the technical requirements for power reactors in the licensing review. But, some of the requirements may not be applicable or insufficient for the licensing reviews of reactors with unique design features. Thus it is necessary to identify which review topics or areas can not be addressed by the existing requirements and to develop the required ones newly or supplement appropriately. Through the study performed so far, it has been identified that the following requirements need to be developed newly for the licensing review of SMART-P: the use of proven technology, the interfacial facility, the non-safety systems, and the metallic fuels. The approach and basis for the development of each of the requirements are discussed. (authors)

Regulatory requirements for replacement of analog systems with digital upgrades

International Nuclear Information System (INIS)

Loeser, P.J.

1993-01-01

This paper reviews briefly the regulatory guidelines which must be met in order to replace analog systems in nuclear power plants with digital systems. There is a move to do such replacements for a number of reasons: analog systems are aging, and showing considerable drift; few vendors manufacture analog systems today; support and parts are hard to get; digital systems provide flexibility. There is a safety concern however about undesirable and unpredictable effects to digital safety equipment due to plant transients, accidents, post-accident condition, and EMI/RF environmental interferences. License holders must comply with the requirements of 10 C.F.R. 50.59, which deals with safety concerns with respect to any changes to operating plants which may have an impact on the safety of the plant. NRC staff is taking the position that all digital upgrades will require an evaluation under this regulation

Regulatory requirements for the use of consumer products containing radioactive substances

International Nuclear Information System (INIS)

Mason, G.C.; Paynter, R.A.; Schmitt-Hannig, A.; Sztanyik, L.B.

1996-01-01

In almost 100 years since the discovery of radioactivity, the properties of radioactive materials have been exploited in products such as clocks and watches incorporating luminous paint which are freely available to members of the public. Over time, regulatory authorities have felt it necessary to apply some degree of control to the supply and use of such products in order to protect public health. In many areas of radiation protection, national authorities take note of international recommendations when developing national standards, but the existing detailed guidance of the International Atomic Energy Agency (IAEA) for consumer products is incomplete and out of date. Recently, a thorough revision of the International Basic Safety Standards (BSS) has occurred, which has prompted a review and revision of the related guidance published by the IAEA. A draft Guide on Regulatory Requirements for the Use of Consumer Products Containing Radioactive Substances has now been completed and is currently under review within the IAEA's system for development of documents in its Safety Series of publications. (author)

Characterizing costs and benefits of uncertain future regulatory requirements on the U.S. natural gas industry

International Nuclear Information System (INIS)

Godec, M.L.; Smith, G.E.; Fitzgibbon, T.

1995-01-01

Environmental regulatory requirements at both the state and federal level are constantly changing, making it difficult for industry and R ampersand D program managers to project future compliance requirements and costs. Even if a company is trying to keep abreast of various proposed regulatory initiatives, the number of possible combinations of initiatives that could occur in the future seems virtually limitless. Uncertainty associated with potential future environmental compliance requirements makes the identification and evaluation of future investment and R ampersand D opportunities exceedingly difficult, and makes the process of systematic strategic planning increasingly complex. This paper describes a methodology for accounting for uncertain future environmental compliance costs in a systematic, comprehensive manner. Through analysis of proposed initiatives for making future environmental requirements more stringent, forecasting the likelihood of occurrence and potential timing of each initiative, and estimating potential future compliance costs associated with each initiative, a thorough process for incorporating regulatory uncertainty into strategic planning and project evaluation is described. This approach can be used for evaluating R ampersand D opportunities to determine where development of new technologies or assessment of risks posed by industry operations may have the greatest impact on future industry costs of compliance. This approach could also be used to account for the uncertainty of future environmental costs in corporate strategic planning or for factoring future compliance costs into project evaluation. This approach could also be enhanced through use in conjunction with other modeling and forecasting systems that could consider a broad range of impacts, including impacts on gas production, industry activity levels, and tax revenues

The major cellular sterol regulatory pathway is required for Andes virus infection.

Directory of Open Access Journals (Sweden)

Josiah Petersen

2014-02-01

Full Text Available The Bunyaviridae comprise a large family of RNA viruses with worldwide distribution and includes the pathogenic New World hantavirus, Andes virus (ANDV. Host factors needed for hantavirus entry remain largely enigmatic and therapeutics are unavailable. To identify cellular requirements for ANDV infection, we performed two parallel genetic screens. Analysis of a large library of insertionally mutagenized human haploid cells and a siRNA genomic screen converged on components (SREBP-2, SCAP, S1P and S2P of the sterol regulatory pathway as critically important for infection by ANDV. The significance of this pathway was confirmed using functionally deficient cells, TALEN-mediated gene disruption, RNA interference and pharmacologic inhibition. Disruption of sterol regulatory complex function impaired ANDV internalization without affecting virus binding. Pharmacologic manipulation of cholesterol levels demonstrated that ANDV entry is sensitive to changes in cellular cholesterol and raises the possibility that clinically approved regulators of sterol synthesis may prove useful for combating ANDV infection.

Incinerators and health. Recommendations relative to the epidemiological studies in order to improve the knowledge on sanitary impacts of incinerators; Incinerateurs et sante. Recommandations concernant les etudes epidemiologiques visant a ameliorer la connaissance sur les impacts sanitaires des incinerateurs

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-10-15

The Institut de Veille Sanitaire gathered a group of experts to put forward the main epidemiologic research issues of health impacts on populations living near municipal waste incineration plants (MWIPs). The study concentrated on the health effects for which a response to the social demand and the public powers is the most difficult due to the fact of continued scientific uncertainty. The health effects are identified as such: - cancers: in adults and children, solid tumours (specifically liver, soft tissues, skin) and hematologic malignancies (specifically leukemia, Non-Hodgkin's Lymphoma); - their effects on reproduction (specifically congenital anomalies). Specific recommendations are made to put in place a multi-faceted study on cancers and follow up on work regarding congenital anomalies from MWIPs. Prospects for other projects are also identified (studies on the sexual maturation process, studies on the work environment). Specific recommendations are made regarding the direction that ought to be taken for putting into place a surveillance system of populations living alongside MWIPs. (author)

Technical area status report for chemical/physical treatment

International Nuclear Information System (INIS)

Brown, C.H. Jr.; Schwinkendorf, W.E.

1993-08-01

The Office of Environmental Restoration and Waste Management (EM) was established by the Department of Energy (DOE) to direct and coordinate waste management and site remediation programs and activities throughout the DOE Complex. The Mixed Waste Integrated Program (MWIP) was created by the DOE Office of Technology Development (OTD) to develop, deploy, and complete appropriate technologies for the treatment of an DOE low-level mixed waste (LLMW). The MWIP mission includes development of strategies related to enhanced waste form production, improvements to and testing of the EM-30 baseline flowsheet for mixed waste treatment, programmatic oversight for ongoing technical projects, and specific technical tasks related to the site specific Federal Facilities Compliance Agreement (FFCA). The MWIP has established five Technical Support Groups (TSGs) based on primary functional areas of the Mixed Waste Treatment Plant) identified by EM-30. These TSGs are: (1) Front-End Waste Handling, (2) Chemical/Physical Treatment, (3) Waste Destruction and Stabilization, (4) Second-stage Destruction and Offgas Treatment, and (5) Final Waste Forms. The focus of this document is the Chemical/Physical Treatment System (CPTS). The CPTS performs the required pretreatment and/or separations on the waste streams passing through the system for discharge to the environment or efficient downstream processing. Downstream processing can include all system components except Front-End Waste Handling. The primary separations to be considered by the CPTS are: (1) removal of suspended and dissolved solids from aqueous and liquid organic streams, (2) separation of water from organic liquids, (3) treatment of wet and dry solids, including separation into constituents as required, for subsequent thermal treatment and final form processing, (4) mercury removal and control, and (5) decontamination of equipment and waste classified as debris

A simplified ALARA approach to demonstration of compliance with surface contaminated object regulatory requirements

International Nuclear Information System (INIS)

Pope, R.B.; Shappert, L.B.; Michelhaugh, R.D.; Boyle, R.W.; Cook, J.C.

1998-02-01

The US Department of Transportation (DOT) and the US Nuclear Regulatory Commission (NRC) have jointly prepared a comprehensive set of draft guidance for consignors and inspectors to use when applying the newly imposed regulatory requirements for low specific activity (LSA) material and surface contaminated objects (SCOs). The guidance is being developed to facilitate compliance with the new LSA material and SCO requirements, not to impose additional requirements. These new requirements represent, in some areas, significant departures from the manner in which packaging and transportation of these materials and objects were previously controlled. On occasion, it may be appropriate to use conservative approaches to demonstrate compliance with some of the requirements, ensuring that personnel are not exposed to radiation at unnecessary levels, so that exposures are kept as low as reasonably achievable (ALARA). In the draft guidance, one such approach would assist consignors preparing a shipment of a large number of SCOs in demonstrating compliance without unnecessarily exposing personnel. In applying this approach, users need to demonstrate that four conditions are met. These four conditions are used to categorize non-activated, contaminated objects as SCO-2. It is expected that, by applying this approach, it will be possible to categorize a large number of small contaminated objects as SCO-2 without the need for detailed, quantitative measurements of fixed, accessible contamination, or of total (fixed and non-fixed) contamination on inaccessible surfaces. The method, which is based upon reasoned argument coupled with limited measurements and the application of a sum of fractions rule, is described and examples of its use are provided

Information Management system of the safety regulatory requirements and guidance for the Korea next generation reactors

International Nuclear Information System (INIS)

Yun, Y. C.; Lee, J. H.; Lee, H. C.; Lee, J. S.

2000-01-01

In order to achieve the safety of the Korea Next Generation Reactors (KNGR), the Korea Institute of Nuclear Safety has carried out the Safety and Regulatory Requirements and Guidance (SRRG) development program from 1992 such as establishment of the SRRG hierarchy, development of technical requirements and guidance, and consideration of new licensing system. The SRRG hierarchy for the KNGR was consisted of five tiers; Safety Objectives, Safety Principles, General Safety Criteria, Specific Safety Requirements and Safety Regulatory Guides. The developed SRRG have been compared the criteria in 10CFR and Reg. Guide in the U.S.A and the IAEA documents for assuring internationally acceptable level of the SRRG. To improve the efficiency and accuracy of SRRG development, the construction of database system was required in the course of development. Therefore, the Information Management System of SRRG for the KNGR has been developed which enables developers to quickly and accurately seek and systematically manage whole contexts of the SRRG, reference requirements, and current atomic energy regulation rules. Moreover, through homepage whose URL is 'http://kngr.kins.re.kr', the concerned persons and public can acquire the information related with SRRG and KNGR project, and post his/her thought to the opinion forum in the homepage

Information Management system of the safety regulatory requirements and guidance for the Korea next generation reactors

Energy Technology Data Exchange (ETDEWEB)

Yun, Y. C. [LG-EDS Systems, Seoul (Korea, Republic of); Lee, J. H.; Lee, H. C.; Lee, J. S. [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

2000-05-01

In order to achieve the safety of the Korea Next Generation Reactors (KNGR), the Korea Institute of Nuclear Safety has carried out the Safety and Regulatory Requirements and Guidance (SRRG) development program from 1992 such as establishment of the SRRG hierarchy, development of technical requirements and guidance, and consideration of new licensing system. The SRRG hierarchy for the KNGR was consisted of five tiers; Safety Objectives, Safety Principles, General Safety Criteria, Specific Safety Requirements and Safety Regulatory Guides. The developed SRRG have been compared the criteria in 10CFR and Reg. Guide in the U.S.A and the IAEA documents for assuring internationally acceptable level of the SRRG. To improve the efficiency and accuracy of SRRG development, the construction of database system was required in the course of development. Therefore, the Information Management System of SRRG for the KNGR has been developed which enables developers to quickly and accurately seek and systematically manage whole contexts of the SRRG, reference requirements, and current atomic energy regulation rules. Moreover, through homepage whose URL is 'http://kngr.kins.re.kr', the concerned persons and public can acquire the information related with SRRG and KNGR project, and post his/her thought to the opinion forum in the homepage.

Data Quality Objectives for Regulatory Requirements for Dangerous Waste Sampling and Analysis

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes sampling and analytical requirements needed to meet state and federal regulations for dangerous waste (DW). The River Protection Project (RPP) is assigned to the task of storage and interim treatment of hazardous waste. Any final treatment or disposal operations, as well as requirements under the land disposal restrictions (LDRs), fall in the jurisdiction of another Hanford organization and are not part of this scope. The requirements for this Data Quality Objective (DQO) Process were developed using the RPP Data Quality Objective Procedure (Banning 1996), which is based on the U.S. Environmental Protection Agency's (EPA) Guidance for the Data Quality Objectives Process (EPA 1994). Hereafter, this document is referred to as the DW DQO. Federal and state laws and regulations pertaining to waste contain requirements that are dependent upon the composition of the waste stream. These regulatory drivers require that pertinent information be obtained. For many requirements, documented process knowledge of a waste composition can be used instead of analytical data to characterize or designate a waste. When process knowledge alone is used to characterize a waste, it is a best management practice to validate the information with analytical measurements

78 FR 76757 - Regulatory Guidance on Hours of Service of Drivers Rest Break Requirement; Drivers Who Become...

Science.gov (United States)

2013-12-19

... limitations for unforeseen reasons, is the driver in violation of the Sec. 395.3 rest break provision if more... unforeseen reasons, is not in violation of the Sec. 395.3 rest-break requirements if 8 or more hours have... Regulatory Guidance on Hours of Service of Drivers Rest Break Requirement; Drivers Who Become Ineligible for...

Development of guidance on applications of regulatory requirements for low specific activity materials and surface contaminated objects

International Nuclear Information System (INIS)

Pope, R.B.; Easton, E.P.; Shankman, S.F.

1997-01-01

In 1985, the International Atomic Energy Agency issued revised regulations for the safe transport of radioactive material. Significant among the changes were major revisions to requirements for Low Specific Activity (LSA) material and Surface Contaminated Objects (SCOs). In preparation for the adoption of these requirements into regulations in the United States, it became apparent that guidance on how to apply these requirements, clarifying technical uncertainties and ensuring proper implementation, would be needed both by the regulators and those regulated. Thus, the US Department of Transportation and the US Nuclear Regulatory Commission, with the assistance of staff from Oak Ridge National Laboratory, are preparing regulatory guidance for LSA material and SCO transport. The guidance will present examples of acceptable methods for demonstrating compliance with the revised rules. Ideas being investigated for inclusion in the pending guidance are discussed in this paper. Under current plans, the guidance will be issued for public comment prior to final issuance of the guidance in 1997

Development of guidance on applications of regulatory requirements for low specific activity materials and surface contaminated objects

International Nuclear Information System (INIS)

Pope, R.B.; Easton, E.P.; Shankman, S.F.; Boyle, R.W.

1997-01-01

In 1985, the International Atomic Energy Agency issued revised regulations for the safe transport of radioactive material. Significant among the changes were major revisions to requirements for Low Specific Activity (LSA) material and Surface Contaminated Objects (SCOs). In preparation for the adoption of these requirements into regulations in the United States, it became apparent that guidance on how to apply these requirements, clarifying technical uncertainties and ensuring proper implementation, would be needed both by the regulators and those regulated. Thus, the US Department of Transportation and the U.S. Nuclear Regulatory Commission, with the assistance of staff from Oak Ridge National Laboratory, are preparing regulatory guidance for LSA material and SCO transport. The guidance will present examples of acceptable methods for demonstrating compliance with the revised rules. Ideas being investigated for inclusion in the pending guidance are discussed in this paper. Under current plans, the guidance will be issued for public comment prior to final issue of the guidance in 1997. (Author)

Federal and state regulatory requirements for the D ampersand D of the Alpha-4 Building, Y-12 Plant, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Etnier, E.L.; Houlberg, L.M.; Bock, R.E.

1994-01-01

The US Department of Energy (DOE) has begun the decontamination and decommissioning (D ampersand D) of Building 9201-4 (Alpha-4) at the Oak Y-12 Plant, Oak Ridge, Tennessee, The Alpha-4 Building was used from 1953--1962 to house a column exchange (Colex) process for lithium isotope separation. This process involved electrochemical and solvent extraction processes that required substantial quantities of mercury. Presently there is no law or regulation mandating decommissioning at DOE facilites or setting de minimis or ''below regulatory concern'' (BRC) radioactivity levels to guide decommissioning activities at DOE facilities. However, DOE Order 5820.2A, Chap. V (Decommissioning of Radioactively Contaminated Facilities), requires that the regulatory status of each project be identified and that technical engineering planning must assure D ampersand D compliance with all environmental regulations during cleanup activities. To assist in the performance of this requirement, this paper gives a brief overview of potential federal and state regulatory requirements related to D ampersand D activities at Alpha-4. Compliance with other federal, state, and local regulations not addressed here may be required, depending on site characterization, actual D ampersand D activities, and wastes generated

The Defence in Depth Concept Applied to the New Regulatory Requirements in Japan

Energy Technology Data Exchange (ETDEWEB)

Yamagata, H., E-mail: hiroshi_yamagata@nsr.go.jp [Nuclear Regulation Authority, Minato-ku, Tokyo (Japan)

2014-10-15

Full text: The new regulatory requirements based on lessons learnt from Fukushima Daiichi accident, which places emphasis on Defense-in-Depth concept, was put into effect in Japan on 8th July, 2013. It is required to prepare multi-layered protective measures. Each layer should achieve the objective only in that layer regardless of the measures in the other layers. The challenge is how to enhance independence of measures between layers. In the third layer, the current concept of design regarding safety relies on “single failure”, whose condition is elimination of common cause failure (CCF). To eliminate CCFs we introduced a more accurate approach in assessment of earthquake and tsunami, and introduction of measures against tsunami inundation. Redundancy of safety systems could not eliminate CCF by extreme natural hazards. Safety system should be designed by due consideration of diversity and independence including spatial dispersement. In the fourth layer, multi-layered protective measures are also applied for severe accidents, which consists of “prevention of core damage” under multiple failure, “prevention of containment failure”, and “prevention of large release, that is controlled release by venting”. In the fifth layer, we also require operators to prepare measures for “suppression of radioactive materials dispersion”. Of course, off-site emergency preparedness and response has been enhanced by introduction of PAZ and UPZ. Introduction of “Specialized Safety Facility” against intentional aircraft crash will contribute enhancement of some layers by providing electricity and water under extremely severe conditions. The new regulatory requirements are not our goal, just a first step. It is expected for regulator and operators to improve safety continuously by periodic comprehensive safety assessments including IPE, IPEEE, Margin test, and etc. We have to make an upward spiral of nuclear safety. (author)

Regulatory Safety Requirements for Operating Nuclear Installations

International Nuclear Information System (INIS)

Gubela, W.

2017-01-01

The National Nuclear Regulator (NNR) is established in terms of the National Nuclear Regulator Act (Act No 47 of 1999) and its mandate and authority are conferred through sections 5 and 7 of this Act, setting out the NNR's objectives and functions, which include exercising regulatory control over siting, design, construction etc of nuclear installations through the granting of nuclear authorisations. The NNR's responsibilities embrace all those actions aimed at providing the public with confidence and assurance that the risks arising from the production of nuclear energy remain within acceptable safety limits -> Therefore: Set fundamental safety standards, conducting pro-active safety assessments, determining licence conditions and obtaining assurance of compliance. The promotional aspects of nuclear activities in South Africa are legislated by the Nuclear Energy Act (Act No 46 of 1999). The NNR approach to regulations of nuclear safety and security take into consideration, amongst others, the potential hazards associated with the facility or activity, safety related programmes, the importance of the authorisation holder's safety related processes as well as the need to exercise regulatory control over the technical aspects such as of the design and operation of a nuclear facility in ensuring nuclear safety and security. South Africa does not have national nuclear industry codes and standards. The NNR is therefore non-prescriptive as it comes to the use of industry codes and standards. Regulatory framework (current) provide for the protection of persons, property, and environment against nuclear damage, through Licensing Process: Safety standards; Safety assessment; Authorisation and conditions of authorisation; Public participation process; Compliance assurance; Enforcement

Fuel utilization experience in Bohunice NPP and regulatory requirements for implementation of progressive fuel management strategies

Energy Technology Data Exchange (ETDEWEB)

Patenyi, V [Nuclear Regulatory Authority, Bratislava (Slovakia); Darilek, P; Majercik, J [Vyskumny Ustav Jadrovych Elektrarni, Trnava (Slovakia)

1994-12-31

The experience gained in fuel utilization and the basic requirements for fuel licensing in the Slovak NPPs is described. The original project of WWER-440 reactors supposes 3-year fuel cycle with cycle length of about 320 full power days (FPD). Since 1984 it was reduced to 290 FPD. Based on the experience of other countries, a 4-year fuel cycle utilization started in 1987. It is illustrated with data from the Bohunice NPP units. Among 504 fuel assemblies left for the fourth burnup cycle no leakage was observed. The mean burnup achieved in the different units varied from 33.1 to 38.5 Mwd/kg U. The new fuel assemblies used are different from the recent ones in construction, thermohydraulics, water-uranium ratio, enrichment and material design. To meet the safety criteria, regulatory requirements for exploitation of new fuel in WWER-440 were formulated by the Nuclear Regulatory Authority of Slovak Republic. 1 tab., 5 refs.

Regulatory inspection of nuclear facilities and enforcement by the regulatory body. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The purpose of this Safety Guide is to provide recommendations for regulatory bodies on the inspection of nuclear facilities, regulatory enforcement and related matters. The objective is to provide the regulatory body with a high level of confidence that operators have the processes in place to ensure compliance and that they do comply with legal requirements, including meeting the safety objectives and requirements of the regulatory body. However, in the event of non-compliance, the regulatory body should take appropriate enforcement action. This Safety Guide covers regulatory inspection and enforcement in relation to nuclear facilities such as: enrichment and fuel manufacturing plants; nuclear power plants; other reactors such as research reactors and critical assemblies; spent fuel reprocessing plants; and facilities for radioactive waste management, such as treatment, storage and disposal facilities. This Safety Guide also covers issues relating to the decommissioning of nuclear facilities, the closure of waste disposal facilities and site rehabilitation. Section 2 sets out the objectives of regulatory inspection and enforcement. Section 3 covers the management of regulatory inspections. Section 4 covers the performance of regulatory inspections, including internal guidance, planning and preparation, methods of inspection and reports of inspections. Section 5 deals with regulatory enforcement actions. Section 6 covers the assessment of regulatory inspections and enforcement activities. The Appendix provides further details on inspection areas for nuclear facilities

Nuclear Energy Research Initiative. Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants. Annual Report

International Nuclear Information System (INIS)

Ritterbusch, S.E.

2000-01-01

The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-informed approach for the design and regulation of nuclear power plants. This approach will include the development and.lor confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRs) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go farther by focusing on the design of new plants

Nuclear Energy Research Initiative. Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants. Annual Report

Energy Technology Data Exchange (ETDEWEB)

Ritterbusch, S.E.

2000-08-01

The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-informed approach for the design and regulation of nuclear power plants. This approach will include the development and.lor confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRs) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go farther by focusing on the design of new plants.

Oil spill emergency response: Fulfilling regulatory requirements on the Grand Banks

International Nuclear Information System (INIS)

Horvath, C.L.

1991-01-01

Offshore well licensing under Canadian regulations requires the operator to conduct a practice exercise of oil spill countermeasures and emergency response procedures at least yearly, once the drilling program starts. The relevant parts of the Newfoundland Offshore Petroleum Drilling Regulations are summarized and the objectives and benefits of the practice exercises are reviewed. In addition to ensuring regulatory compliance, the exercises also provide the opportunity to test operational procedures, to provide in-house training, and improve response efficiency by regular repetition of the exercise. Exercises in communications during a spill incident in the offshore and in deployment of offshore spill response equipment conducted by Petro-Canada in Newfoundland are described. Problems identified during the exercises are noted

Environment, safety, and health regulatory implementation plan

International Nuclear Information System (INIS)

1993-01-01

To identify, document, and maintain the Uranium Mill Tailings Remedial Action (UMTRA) Project's environment, safety, and health (ES ampersand H) regulatory requirements, the US Department of Energy (DOE) UMTRA Project Office tasked the Technical Assistance Contractor (TAC) to develop a regulatory operating envelope for the UMTRA Project. The system selected for managing the UMTRA regulatory operating envelope data bass is based on the Integrated Project Control/Regulatory Compliance System (IPC/RCS) developed by WASTREN, Inc. (WASTREN, 1993). The IPC/RCS is a tool used for identifying regulatory and institutional requirements and indexing them to hardware, personnel, and program systems on a project. The IPC/RCS will be customized for the UMTRA Project surface remedial action and groundwater restoration programs. The purpose of this plan is to establish the process for implementing and maintaining the UMTRA Project's regulatory operating envelope, which involves identifying all applicable regulatory and institutional requirements and determining compliance status. The plan describes how the Project will identify ES ampersand H regulatory requirements, analyze applicability to the UMTRA Project, and evaluate UMTRA Project compliance status

Data Quality Objectives for Regulatory Requirements for Dangerous Waste Sampling and Analysis; FINAL

International Nuclear Information System (INIS)

MULKEY, C.H.

1999-01-01

This document describes sampling and analytical requirements needed to meet state and federal regulations for dangerous waste (DW). The River Protection Project (RPP) is assigned to the task of storage and interim treatment of hazardous waste. Any final treatment or disposal operations, as well as requirements under the land disposal restrictions (LDRs), fall in the jurisdiction of another Hanford organization and are not part of this scope. The requirements for this Data Quality Objective (DQO) Process were developed using the RPP Data Quality Objective Procedure (Banning 1996), which is based on the U.S. Environmental Protection Agency's (EPA) Guidance for the Data Quality Objectives Process (EPA 1994). Hereafter, this document is referred to as the DW DQO. Federal and state laws and regulations pertaining to waste contain requirements that are dependent upon the composition of the waste stream. These regulatory drivers require that pertinent information be obtained. For many requirements, documented process knowledge of a waste composition can be used instead of analytical data to characterize or designate a waste. When process knowledge alone is used to characterize a waste, it is a best management practice to validate the information with analytical measurements

Radiological and administrative criteria and procedures required by the Radiation Protection Ordinance for exemption from regulatory control

International Nuclear Information System (INIS)

Birkholz, W.

2000-01-01

The system of required radioactivity measurements and limits as well as methods, based on the 10 μSv concept, constitutes the regulatory regime for exemption of radioactive waste materials from regulatory control according to atomic energy law. The methods and administrative procedures are suitable both for smaller amounts of materials, such as those resulting from the use of radioactive substances in scientific research and medical applications, and for the large waste volumes emanating from the dismantling of nuclear installations. The system provided for in the Radiation Protection Ordinance ensures harmonized administrative action of all public authorities involved. (orig./CB) [de

An overview of exhaust emissions regulatory requirements and control technology for stationary natural gas engines

International Nuclear Information System (INIS)

Ballard, H.N.; Hay, S.C.; Shade, W.N. Jr.

1992-01-01

In this paper a practical overview of stationary natural gas engine exhaust emissions control technology and trends in emissions regulatory requirements is presented. Selective and non-selective catalytic reduction and lean burn technologies are compared. Particular emphasis is focussed on implications of the Clean Air Act of 1990. Recent emissions reduction conversion kit developments and a practical approach to continuous monitoring are discussed

A comparison of immunotoxic effects of nanomedicinal products with regulatory immunotoxicity testing requirements

Directory of Open Access Journals (Sweden)

Giannakou C

2016-06-01

Full Text Available Christina Giannakou,1,2 Margriet VDZ Park,1 Wim H de Jong,1 Henk van Loveren,1,2 Rob J Vandebriel,1 Robert E Geertsma1 1Centre for Health Protection, National Institute for Public Health and the Environment (RIVM, Bilthoven, 2Department of Toxicogenomics, Maastricht University, Maastricht, the Netherlands Abstract: Nanomaterials (NMs are attractive for biomedical and pharmaceutical applications because of their unique physicochemical and biological properties. A major application area of NMs is drug delivery. Many nanomedicinal products (NMPs currently on the market or in clinical trials are most often based on liposomal products or polymer conjugates. NMPs can be designed to target specific tissues, eg, tumors. In virtually all cases, NMPs will eventually reach the immune system. It has been shown that most NMs end up in organs of the mononuclear phagocytic system, notably liver and spleen. Adverse immune effects, including allergy, hypersensitivity, and immunosuppression, have been reported after NMP administration. Interactions of NMPs with the immune system may therefore constitute important side effects. Currently, no regulatory documents are specifically dedicated to evaluate the immunotoxicity of NMs or NMPs. Their immunotoxicity assessment is performed based on existing guidelines for conventional substances or medicinal products. Due to the unique properties of NMPs when compared with conventional medicinal products, it is uncertain whether the currently prescribed set of tests provides sufficient information for an adequate evaluation of potential immunotoxicity of NMPs. The aim of this study was therefore, to compare the current regulatory immunotoxicity testing requirements with the accumulating knowledge on immunotoxic effects of NMPs in order to identify potential gaps in the safety assessment. This comparison showed that immunotoxic effects, such as complement activation-related pseudoallergy, myelosuppression, inflammasome

Process simulation and uncertainty analysis of plasma arc mixed waste treatment

International Nuclear Information System (INIS)

Ferrada, J.J.; Welch, T.D.

1994-01-01

Innovative mixed waste treatment subsystems have been analyzed for performance, risk, and life-cycle cost as part of the U.S. Department of Energy's (DOE)'s Mixed Waste Integrated Program (MWIP) treatment alternatives development and evaluation process. This paper concerns the analysis of mixed waste treatment system performance. Performance systems analysis includes approximate material and energy balances and assessments of operability, effectiveness, and reliability. Preliminary material and energy balances of innovative processes have been analyzed using FLOW, an object-oriented, process simulator for waste management systems under development at Oak Ridge National Laboratory. The preliminary models developed for FLOW provide rough order-of-magnitude calculations useful for sensitivity analysis. The insight gained from early modeling of these technologies approximately will ease the transition to more sophisticated simulators as adequate performance and property data become available. Such models are being developed in ASPEN by DOE's Mixed Waste Treatment Project (MWTP) for baseline and alternative flow sheets based on commercial technologies. One alternative to the baseline developed by the MWIP support groups in plasma arc treatment. This process offers a noticeable reduction in the number of process operations as compared to the baseline process because a plasma arc melter is capable of accepting a wide variety of waste streams as direct inputs (without sorting or preprocessing). This innovative process for treating mixed waste replaces several units from the baseline process and, thus, promises an economic advantage. The performance in the plasma arc furnace will directly affect the quality of the waste form and the requirements of the off-gas treatment units. The ultimate objective of MWIP is to reduce the amount of final waste produced, the cost, and the environmental impact

77 FR 8082 - Regulatory Flexibility Agenda

Science.gov (United States)

2012-02-13

... Required: Yes. Agency Contact: Alicia Goldin, Division of Trading and Markets, Securities and Exchange.../01/11 Regulatory Flexibility Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of... Withdrawn 10/01/11 Regulatory Flexibility Analysis Required: Yes. Agency Contact: Alicia Goldin, Division of...

Regulatory guidance document

International Nuclear Information System (INIS)

1994-05-01

The Office of Civilian Radioactive Waste Management (OCRWM) Program Management System Manual requires preparation of the OCRWM Regulatory Guidance Document (RGD) that addresses licensing, environmental compliance, and safety and health compliance. The document provides: regulatory compliance policy; guidance to OCRWM organizational elements to ensure a consistent approach when complying with regulatory requirements; strategies to achieve policy objectives; organizational responsibilities for regulatory compliance; guidance with regard to Program compliance oversight; and guidance on the contents of a project-level Regulatory Compliance Plan. The scope of the RGD includes site suitability evaluation, licensing, environmental compliance, and safety and health compliance, in accordance with the direction provided by Section 4.6.3 of the PMS Manual. Site suitability evaluation and regulatory compliance during site characterization are significant activities, particularly with regard to the YW MSA. OCRWM's evaluation of whether the Yucca Mountain site is suitable for repository development must precede its submittal of a license application to the Nuclear Regulatory Commission (NRC). Accordingly, site suitability evaluation is discussed in Chapter 4, and the general statements of policy regarding site suitability evaluation are discussed in Section 2.1. Although much of the data and analyses may initially be similar, the licensing process is discussed separately in Chapter 5. Environmental compliance is discussed in Chapter 6. Safety and Health compliance is discussed in Chapter 7

Improving nuclear regulatory effectiveness

International Nuclear Information System (INIS)

2001-01-01

Ensuring that nuclear installations are operated and maintained in such a way that their impact on public health and safety is as low as reasonably practicable has been and will continue to be the cornerstone of nuclear regulation. In the past, nuclear incidents provided the main impetus for regulatory change. Today, economic factors, deregulation, technological advancements, government oversight and the general requirements for openness and accountability are leading regulatory bodies to review their effectiveness. In addition, seeking to enhance the present level of nuclear safety by continuously improving the effectiveness of regulatory bodies is seen as one of the ways to strengthen public confidence in the regulatory systems. This report covers the basic concepts underlying nuclear regulatory effectiveness, advances being made and future requirements. The intended audience is primarily nuclear safety regulators, but government authorities, nuclear power plant operators and the general public may also be interested. (author)

The dynein regulatory complex is required for ciliary motility and otolith biogenesis in the inner ear.

Science.gov (United States)

Colantonio, Jessica R; Vermot, Julien; Wu, David; Langenbacher, Adam D; Fraser, Scott; Chen, Jau-Nian; Hill, Kent L

2009-01-08

In teleosts, proper balance and hearing depend on mechanical sensors in the inner ear. These sensors include actin-based microvilli and microtubule-based cilia that extend from the surface of sensory hair cells and attach to biomineralized 'ear stones' (or otoliths). Otolith number, size and placement are under strict developmental control, but the mechanisms that ensure otolith assembly atop specific cells of the sensory epithelium are unclear. Here we demonstrate that cilia motility is required for normal otolith assembly and localization. Using in vivo video microscopy, we show that motile tether cilia at opposite poles of the otic vesicle create fluid vortices that attract otolith precursor particles, thereby biasing an otherwise random distribution to direct localized otolith seeding on tether cilia. Independent knockdown of subunits for the dynein regulatory complex and outer-arm dynein disrupt cilia motility, leading to defective otolith biogenesis. These results demonstrate a requirement for the dynein regulatory complex in vertebrates and show that cilia-driven flow is a key epigenetic factor in controlling otolith biomineralization.

Introduction to the Unified Agenda of Federal Regulatory and Deregulatory Actions

Science.gov (United States)

2010-04-26

... Regulatory Commission Federal Housing Finance Agency Federal Maritime Commission Federal Mediation and... that the Regulatory Flexibility Act may require a Regulatory Flexibility Analysis, actions selected for.... Regulatory Flexibility Analysis Required -- whether an analysis is required by the Regulatory Flexibility Act...

A regulatory adjustment process for the determination of the optimal percentage requirement in an electricity market with Tradable Green Certificates

International Nuclear Information System (INIS)

Currier, Kevin M.

2013-01-01

A system of Tradable Green Certificates (TGCs) is a market-based subsidy scheme designed to promote electricity generation from renewable energy sources such as wind power. Under a TGC system, the principal policy instrument is the “percentage requirement,” which stipulates the percentage of total electricity production (“green” plus “black”) that must be obtained from renewable sources. In this paper, we propose a regulatory adjustment process that a regulator can employ to determine the socially optimal percentage requirement, explicitly accounting for environmental damages resulting from black electricity generation. - Highlights: • A Tradable Green Certificate (TGC) system promotes energy production from renewable sources. • We consider an electricity oligopoly operated under a TGC system. • Welfare analysis must account for damages from “black” electricity production. • We characterize the welfare maximizing (optimal) “percentage requirement.” • We present a regulatory adjustment process that computes the optimal percentage requirement iteratively

UK regulatory standards - the 'Guidance on requirements for authorisation'

International Nuclear Information System (INIS)

Williams, C.R.

1999-01-01

In the United Kingdom, disposal of radioactive waste requires an authorisation under the Radioactive Substances Act 1993. The power to grant such authorisations rests with the Environment Agency for disposals in England and Wales, and with similar Agencies in Scotland and Northern Ireland - namely the Scottish Environment Protection Agency (SEPA) and the Environment and Heritage Service (EHS) of the Department of the Environment for Northern Ireland. In 1997, following two rounds of consultation, the Environment Agency jointly with SEPA and EHS published a document 'Disposal Facilities on Land for Low and Intermediate Level Radioactive Wastes: Guidance on Requirements for Authorisation' - the GRA document. The GRA document outlines the regulatory framework governing the disposal of radioactive waste, general guidance on procedures, the principles and criteria against which proposals for a disposal facility will be assessed, and the radiological and technical requirements which a facility will be expected to meet. In particular, the document states that, in the period after control is withdrawn, the assessed radiological risk from a facility to a representative member of the potentially exposed group at greatest risk should be consistent with a risk target of 10 -6 per year. The document also specifies the information which a developer will need to provide, to demonstrate that a proposal is consistent with the principles and requirements, and identifies other, non-risk-based, criteria. In March 1997, the Secretary of State for the Environment rejected a planning appeal by United Kingdom Nirex Ltd for an underground Rock Characterisation Facility located near Sellafield in Cumbria. That decision has effectively delayed the construction of any deep repository in the UK. Subsequently a House of Lords Select Committee has commenced a major review of nuclear waste management. The Environment Agency continues to be responsible for the authorisation of the shallow

Economics of the specification 6M safety re-evaluation and regulatory requirements

International Nuclear Information System (INIS)

Hopper, C.M.

1985-01-01

The objective of this work was to examine the potential economic impact of the DOT Specification 6M criticality safety re-evaluation and regulatory requirements. The examination was based upon comparative analyses of current authorized fissile material load limits for the 6M, current Federal regulations (and interpretations) limiting the contents of Type B fissile material packages, limiting aggregates of fissile material packages, and recent proposed fissile material mass limits derived from specialized criticality safety analyses of the 6M package. The work examines influences on cost in transportation, handling, and storage of fissile materials. Depending upon facility throughput requirements (and assumed incremental costs of fissile material packaging, storage, and transport), operating, facility storage capacity, and transportation costs can be reduced significantly. As an example of the pricing algorithm application based upon reasonable cost influences, the magnitude of the first year cost reductions could extend beyond four times the cost of the packaging nuclear criticality safety re-evaluation. 1 tab

Regulatory framework for nuclear power plant operation

International Nuclear Information System (INIS)

Perez Alcaniz, T.; Esteban Barriendos, M.

1995-01-01

As the framework of standards and requirements covering each phase of nuclear power plant project and operation developed, plant owners defined their licensing commitments (codes, rules and design requirements) during the project and construction phase before start-up and incorporated regulatory requirements imposed by the regulatory Body during the licensing process prior to operation. This produces a regulatory framework for operating a plant. It includes the Licensing Basis, which is the starting point for analyzing and incorporating new requirements, and for re-evaluation of existing ones. This presentation focuses on the problems of applying this regulatory framework to new operating activities, in particular to new projects, analyzing new requirements, and reconsidering existing ones. Clearly establishing a plant's licensing basis allows all organizations involved in plant operation to apply the requirements in a more rational way. (Author)

Requirements for growth and IL-10 expression of highly purified human T regulatory cells

OpenAIRE

Bonacci, Benedetta; Edwards, Brandon; Jia, Shuang; Williams, Calvin; Hessner, Martin J.; Gauld, Stephen; Verbsky, James

2012-01-01

Human regulatory T cells (TR) cells have potential for the treatment of a variety of immune mediated diseases but the anergic phenotype of these cells makes them difficult to expand in vitro. We have examined the requirements for growth and cytokine expression from highly purified human TR cells, and correlated these findings with the signal transduction events of these cells. We demonstrate that these cells do not proliferate or secrete IL-10 even in the presence of high doses of IL-2. Stimu...

Lessons learned from the Fukushima Dai-ichi accident and responses in NRA regulatory requirements

International Nuclear Information System (INIS)

Fuketa, Toyoshi

2014-01-01

The author would like to present significant lessons learned from the TEPCO’s Fukushima Dai-ichi accident and responses in regulatory requirements developed by the Nuclear Regulation Authority for power-producing light water reactors. The presentation will cover prevention of structures, systems and components failures, measures to prevent common cause failures, prevention of core damage, mitigation of severe accidents, emergency preparedness, continuous improvement of safety, use of probabilistic risk assessment, and post-accident regulation on the Fukushima Dai-ichi. (author)

Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes

International Nuclear Information System (INIS)

Perona, J.J.; Brown, C.H.

1993-03-01

The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP

MWIP: Surrogate formulations for thermal treatment of low-level mixed waste

International Nuclear Information System (INIS)

Bostick, W.D.; Hoffmann, D.P.; Stevenson, R.J.; Richmond, A.A.; Bickford, D.F.

1994-01-01

The category of sludges, filter cakes, and other waste processing residuals represent the largest volume of low-level mixed (hazardous and radioactive) wastes within the US Department of Energy (DOE) complex. Treatment of these wastes to minimize the mobility of contaminants, and to eliminate the presence of free water, is required under the Federal Facility Compliance Act agreements between DOE and the Environmental Protection Agency. In the text, we summarize the currently available data for several of the high priority mixed-waste sludge inventories within DOE. Los Alamos National Laboratory TA-50 Sludge and Rocky Flats Plant By-Pass Sludge are transuranic (TRU)-contaminated sludges that were isolated with the use of silica-based filter aids. The Oak Ridge Y-12 Plant West End Treatment Facility Sludge is predominantly calcium carbonate and biomass. The Oak Ridge K-25 Site Pond Waste is a large-volume waste stream, containing clay, silt, and other debris in addition to precipitated metal hydroxides. We formulate ''simulants'' for the waste streams described above, using cerium oxide as a surrogate for the uranium or plutonium present in the authentic material. Use of nonradiological surrogates greatly simplifies material handling requirements for initial treatability studies. The use of synthetic mixtures for initial treatability testing will facilitate compositional variation for use in conjunction with statistical design experiments; this approach may help to identify any ''operating window'' limitations. The initial treatability testing demonstrations utilizing these ''simulants'' will be based upon vitrification, although the materials are also amenable to testing grout-based and other stabilization procedures. After the feasibility of treatment and the initial evaluation of treatment performance has been demonstrated, performance must be verified using authentic samples of the candidate waste stream

[Regulatory requirements regarding cell-based medicinal products for human and veterinary use - a comparison].

Science.gov (United States)

Kuhlmann-Gottke, Johanna; Duchow, Karin

2015-11-01

At present, there is no separate regulatory framework for cell-based medicinal products (CBMP) for veterinary use at the European or German level. Current European and national regulations exclusively apply to the corresponding medicinal products for human use. An increasing number of requests for the regulatory classification of CBMP for veterinary use, such as allogeneic stem cell preparations and dendritic cell-based autologous tumour vaccines, and a rise in scientific advice for companies developing these products, illustrate the need for adequate legislation. Currently, advice is given and decisions are made on a case-by-case basis regarding the regulatory classification and authorisation requirements.Since some of the CBMP - in particular in the area of stem-cell products - are developed in parallel for human and veterinary use, there is an urgent need to create specific legal definitions, regulations, and guidelines for these complex innovative products in the veterinary sector as well. Otherwise, there is a risk that that the current legal grey area regarding veterinary medicinal products will impede therapeutic innovations in the long run. A harmonised EU-wide approach is desirable. Currently the European legislation on veterinary medicinal products is under revision. In this context, veterinary therapeutics based on allogeneic cells and tissues will be defined and regulated. Certainly, the legal framework does not have to be as comprehensive as for human CBMP; a leaner solution is conceivable, similar to the special provisions for advanced-therapy medicinal products laid down in the German Medicines Act.

Regulatory aspects of criticality control in Australia

International Nuclear Information System (INIS)

Zimin, Sergei

2003-01-01

With the creation of Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) the Australian approach to criticality safety was revisited. Consistency with international best practices is required by the Act that created ARPANSA and this was applied to practices in criticality safety adopted in other countries. This required extensive regulatory efforts both in auditing the major Australian Nuclear Operator, Australian Nuclear Science and Technology Organisation (ANSTO), and assessing the existing in Australia criticality safety practices and implementing the required changes using the new legislative power of ARPANSA. The adopted regulatory approach is formulated through both the issued by ARPANSA licenses for nuclear installations (including reactors, fuel stores and radioactive waste stores) and the string of new regulatory documents, including the Regulatory Assessment Principles and the Regulatory Assessment Guidelines for criticality safety. The main features of the adopted regulation include the requirements of independent peer-review, ongoing refresher training coupled with annual accreditation and the reliance on the safe design rather than on an administrative control. (author)

Regulatory analysis technical evaluation handbook. Final report

International Nuclear Information System (INIS)

1997-01-01

The purpose of this Handbook is to provide guidance to the regulatory analyst to promote preparation of quality regulatory analysis documents and to implement the policies of the Regulatory Analysis Guidelines of the US Nuclear Regulatory Commission (NUREG/BR-0058 Rev. 2). This Handbook expands upon policy concepts included in the NRC Guidelines and translates the six steps in preparing regulatory analyses into implementable methodologies for the analyst. It provides standardized methods of preparation and presentation of regulatory analyses, with the inclusion of input that will satisfy all backfit requirements and requirements of NRC's Committee to Review Generic Requirements. Information on the objectives of the safety goal evaluation process and potential data sources for preparing a safety goal evaluation is also included. Consistent application of the methods provided here will result in more directly comparable analyses, thus aiding decision-makers in evaluating and comparing various regulatory actions. The handbook is being issued in loose-leaf format to facilitate revisions. NRC intends to periodically revise the handbook as new and improved guidance, data, and methods become available

Evaluation of the applicability of existing nuclear power plant regulatory requirements in the U.S. to advanced small modular reactors.

Energy Technology Data Exchange (ETDEWEB)

LaChance, Jeffrey L.; Wheeler, Timothy A.; Farnum, Cathy Ottinger; Middleton, Bobby D.; Jordan, Sabina Erteza; Duran, Felicia Angelica; Baum, Gregory A.

2013-05-01

The current wave of small modular reactor (SMR) designs all have the goal of reducing the cost of management and operations. By optimizing the system, the goal is to make these power plants safer, cheaper to operate and maintain, and more secure. In particular, the reduction in plant staffing can result in significant cost savings. The introduction of advanced reactor designs and increased use of advanced automation technologies in existing nuclear power plants will likely change the roles, responsibilities, composition, and size of the crews required to control plant operations. Similarly, certain security staffing requirements for traditional operational nuclear power plants may not be appropriate or necessary for SMRs due to the simpler, safer and more automated design characteristics of SMRs. As a first step in a process to identify where regulatory requirements may be met with reduced staffing and therefore lower cost, this report identifies the regulatory requirements and associated guidance utilized in the licensing of existing reactors. The potential applicability of these regulations to advanced SMR designs is identified taking into account the unique features of these types of reactors.

Development of regulatory policy for SMART-P

Energy Technology Data Exchange (ETDEWEB)

Lee, S. H.; Lee, Y. H.; Moo, Philip; Koh, B. J.; Son, M. K.; Han, G. H.; Kim, D. H. [Korea Association for Nuclear Technology, Daejeon (Korea, Republic of)

2004-06-15

KAERI promoted the construction of a research reactor, SMART-P, the reduced scale of SMART, with intent to demonstrate the safety and performance of SMART. According to this progress, the development of regulatory process for SMART-P became necessary. The establishment of regulatory policy, based on the current regulatory guidelines as well as technical aspect, became essential matters. Considering the on-going small and medium size reactors in near future, the selection of the appropriate measure in the existing regulatory process to SMART-P is very important. Thus the schematic study for the applicable licensing procedure and regulatory requirements suitable for SMART-P is required.

Development of regulatory policy for SMART-P

Energy Technology Data Exchange (ETDEWEB)

Lee, S. H.; Moon, S. H.; Lee, Y. H.; Son, M. K.; Han, K. H.; Kim, D. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

2003-06-15

KAERI promoted the construction of a research reactor, SMART-P, the reduced scale of SMART, with intent to demonstrate the safety and performance of SMART. According to this progress, the development of regulatory process for SMART-P became necessary. The establishment of regulatory policy, based on the current regulatory guidelines as well as technical aspect, became essential matters. Considering the on-going small and medium size reactors m near future, the selection of the appropriate measure in the existing regulatory process to SMART-P is very important. Thus the schematic study for the applicable licensing procedure and regulatory requirements suitable for SMART-P is required.

Regulatory requirements for groundwater monitoring networks at hazardous waste sites

International Nuclear Information System (INIS)

Keller, J.F.

1989-10-01

In the absence of an explicit national mandate to protect groundwater quality, operators of active and inactive hazardous waste sites must use a number of statutes and regulations as guidance for detecting, correcting, and preventing groundwater contamination. The objective of this paper is to provide a framework of the technical and regulatory considerations that are important to the development of groundwater monitoring programs at hazardous waste sites. The technical site-specific needs and regulatory considerations, including existing groundwater standards and classifications, will be presented. 14 refs., 2 tabs

78 FR 44275 - Semiannual Regulatory Agenda

Science.gov (United States)

2013-07-23

... Rights. National Park Service--Completed Actions Regulation Sequence No. Title Identifier No. 200 Winter.... Timetable: Action Date FR Cite NPRM 07/00/13 Final Action 05/00/14 Regulatory Flexibility Analysis Required...: Action Date FR Cite NPRM 10/00/14 Final Action 10/00/14 Regulatory Flexibility Analysis Required: Yes...

Regulatory philosophy and requirements for radiation control in Canadian uranium mine-mill facilities

International Nuclear Information System (INIS)

Dory, A.B.

1981-10-01

With the point made that radiation exposure is one of the health hazards of uranium mining and accordingly has to be controlled, the Canadian regulatory philosophy is outlined as it pertains to the uranium mining industry. Two extremes in regulatory approach are examined, and the joint regulatory process is explained. Two examples of poor management performance are given, and the role of mine unions in the regulatory process is touched upon. The development of new regulations to cover ventilation and employee training is sketched briefly. The author concludes with a general expression of objectives for the eighties which include improved personal dosimetry

Safety Committees for Argentinean Research Reactor - Regulatory Issues

International Nuclear Information System (INIS)

Perrin, Carlos D.

2009-01-01

In the field of radiological and nuclear safety, the Nuclear Regulatory Authority (ARN) of Argentina controls three research reactors and three critical assemblies, by means of evaluations, audits and inspections, in order to ensure the fulfillment of the requirements established in the Licenses, in the Regulatory Standards and in the Mandatory Documentation in general. From the Nuclear Regulatory Authority's point of view, within the general process of research reactors safety management, the Operational Organization self verification of radiological and nuclear safety plays an outstanding role. In this aspect the ARN has established specific requirements in the Regulatory Standards, in the Operation Licenses and in the Operational Limits and Conditions. These requirements include the figure of different safety committees, which act as reviewers or advisers in diverse situations. This paper describes the main characteristics of the committees, their function, scope and the regulatory documents where the requirements are included. (author)

Methodology for the Systematic Assessment of the Regulatory Competence Needs (SARCoN) for Regulatory Bodies of Nuclear Installations

International Nuclear Information System (INIS)

2015-03-01

A regulatory body’s competence is dependent, among other things, on the competence of its staff. A necessary, but not sufficient, condition for a regulatory body to be competent is that its staff can perform the tasks related to the functions of the regulatory body. In 2001, the IAEA published TECDOC 1254, Training the Staff of the Regulatory Body for Nuclear Facilities: A Competency Framework, which examines the manner in which the recognized regulatory functions of a nuclear regulatory body results in competence needs. Using the internationally recognized systematic approach to training, TECDOC 1254 provides a framework for regulatory bodies for managing training and developing, and maintaining the competence of its staff. It has been successfully used by many regulatory bodies all over the world, including States embarking on a nuclear power programme. The IAEA has also introduced a methodology and an assessment tool — Guidelines for Systematic Assessment of Regulatory Competence Needs (SARCoN) — which provides practical guidance on analysing the training and development needs of a regulatory body and, through a gap analysis, guidance on establishing competence needs and how to meet them. In 2013, the IAEA published Safety Reports Series No. 79, Managing Regulatory Body Competence, which provides generic guidance based on IAEA safety requirements in the development of a competence management system within a regulatory body’s integrated management system. An appendix in the Safety Report deals with the special case of building up the competence of regulatory bodies as part of the overall process of establishing an embarking State’s regulatory system. This publication provides guidance for the analysis of required and existing competences to identify those required by the regulatory body to perform its functions and therefore associated needs for acquiring competences. Hence, it is equally applicable to the needs of States embarking on nuclear power

Mission Risk Reduction Regulatory Change Management

Science.gov (United States)

Scroggins, Sharon

2007-01-01

NASA Headquarters Environmental Management Division supports NASA's mission to pioneer the future in space exploration, scientific discovery, and aeronautics research by integrating environmental considerations into programs and projects early-on, thereby proactively reducing NASA's exposure to institutional, programmatic and operational risk. As part of this effort, NASA established the Principal Center for Regulatory Risk Analysis and Communication (RRAC PC) as a resource for detecting, analyzing, and communicating environmental regulatory risks to the NASA stakeholder community. The RRAC PC focuses on detecting emerging environmental regulations and other operational change drivers that may pose risks to NASA programs and facilities, and effectively communicating the potential risks. For example, regulatory change may restrict how and where certain activities or operations may be conducted. Regulatory change can also directly affect the ability to use certain materials by mandating a production phase-out or restricting usage applications of certain materials. Regulatory change can result in significant adverse impacts to NASA programs and facilities due to NASA's stringent performance requirements for materials and components related to human-rated space vehicles. Even if a regulation does not directly affect NASA operations, U.S. and international regulations can pose program risks indirectly through requirements levied on manufacturers and vendors of components and materials. For example, manufacturers can change their formulations to comply with new regulatory requirements. Such changes can require time-consuming and costly requalification certification for use in human spaceflight programs. The RRAC PC has implemented a system for proactively managing regulatory change to minimize potential adverse impacts to NASA programs and facilities. This presentation highlights the process utilized by the RRACPC to communicate regulatory change and the associated

Regulatory issues associated with the Multi-Purpose (MPC) system

International Nuclear Information System (INIS)

Roberts, J.P.; Desell, L.J.; Birch, M.L.; Morgan, R.G.

1994-01-01

The US Department of Energy Office of Civilian Radioactive Waste Management is developing a Multi-Purpose Canister system to promote compatibility between the waste program elements of storage, transportation, and disposal. The development of a Multi-Purpose Canister system requires meeting various regulatory requirements. These regulatory requirements are set forth in environmental and Nuclear Regulatory Commission (NRC) regulations. This paper discusses the more significant regulatory issues that must be addressed in the development of a Multi-Purpose Canister system by the Department of Energy

Design reviews from a regulatory perspective

International Nuclear Information System (INIS)

Foster, B.D.

1991-01-01

This paper presents views on the role of the licensing engineer in the design process with specific emphasis on design reviews and the automated information management tools that support design reviews. The licensing engineer is seen as an important member of a design review team. The initial focus of the licensing engineer during design reviews is shown to be on ensuring that applicable regulatory requirements are addressed by the design. The utility of an automated tool, such as a commitments management system, to support regulatory requirements identification is discussed. The next responsibility of the licensing engineer is seen as verifying that regulatory requirements are transformed into measurable performance requirements. Performance requirements are shown to provide the basis for developing detailed design review criteria. Licensing engineer input during design reviews is discussed. This input is shown to be especially critical in cases where review findings may impact application of regulatory requirements. The use of automated tools in supporting design reviews is discussed. An information structure is proposed to support design reviews in a regulated environment. This information structure is shown to be useful to activities beyond design reviews. Incorporation of the proposed information structure into the Licensing Support System is proposed

Regulatory requirements for clinical trial and marketing authorisation application for cell-based medicinal products.

Science.gov (United States)

Salmikangas, P; Flory, E; Reinhardt, J; Hinz, T; Maciulaitis, R

2010-01-01

The new era of regenerative medicine has led to rapid development of new innovative therapies especially for diseases and tissue/organ defects for which traditional therapies and medicinal products have not provided satisfactory outcome. Although the clinical use and developments of cell-based medicinal products (CBMPs) could be witnessed already for a decade, robust scientific and regulatory provisions for these products have only recently been enacted. The new Regulation for Advanced Therapies (EC) 1394/2007 together with the revised Annex I, Part IV of Directive 2001/83/EC provides the new legal framework for CBMPs. The wide variety of cell-based products and the foreseen limitations (small sample sizes, short shelf life) vs. particular risks (microbiological purity, variability, immunogenicity, tumourigenicity) associated with CBMPs have called for a flexible, case-by-case regulatory approach for these products. Consequently, a risk-based approach has been developed to allow definition of the amount of scientific data needed for a Marketing Authorisation Application (MAA) of each CBMP. The article provides further insight into the initial risk evaluation, as well as to the quality, non-clinical, and clinical requirements of CBMPs. Special somatic cell therapies designed for active immunotherapy are also addressed.

Guidelines on how to meet the requirement to keep all exposures as low as reasonably achievable. Regulatory guide

International Nuclear Information System (INIS)

1997-01-01

The purpose of Regulatory Guide G-129 (E) is to provide Atomic Energy Control Board (AECB) licensees with guidelines on how to meet the forthcoming AECB regulatory requirement to keep doses received by workers and members of the public As Low As Reasonably Achievable (ALARA), social and economic factors taken into account. it is realized that the scope for realistic dose reductions will vary depending on the nature of the licensed activity. Therefore, criteria are given in section D for determining if doses can be deemed to be as low as reasonably achievable without further evaluation. The elements that the AECB considers to be essential in the approach to ALARA are described in section E and are summarized as follows: a demonstrated management commitment to the ALARA principle; the implementation of ALARA through a licensee's organization and management, provision of resources, training, establishment of action levels, documentation and other measures; and regular operational reviews. The above elements will be the focus of any AECB assessment to verify compliance with the requirement to keep radiation exposures as low as reasonably achievable. (author)

Regulatory science requirements of labeling of genetically modified food.

Science.gov (United States)

Moghissi, A Alan; Jaeger, Lisa M; Shafei, Dania; Bloom, Lindsey L

2018-05-01

This paper provides an overview of the evolution of food labeling in the USA. It briefly describes the three phases of agricultural development consisting of naturally occurring, cross-bred, and genetically engineered, edited or modified crops, otherwise known as Genetically Modified Organisms (GMO). It uses the Best Available Regulatory Science (BARS) and Metrics for Evaluation of Regulatory Science Claims (MERSC) to evaluate the scientific validity of claims applicable to GMO and the Best Available Public Information (BAPI) to evaluate the pronouncements by public media and others. Subsequently claims on health risk, ecological risk, consumer choice, and corporate greed are evaluated based on BARS/MERSC and BAPI. The paper concludes by suggesting that labeling of food containing GMO should consider the consumer's choice, such as the food used by those who desire kosher and halal food. Furthermore, the consumer choice is already met by the exclusion of GMO in organic food.

Regulatory requirements on management of radioactive material safe transport in China

International Nuclear Information System (INIS)

Chu, C.

2016-01-01

Since 1980s, the IAEA Regulation for safe transport of radioactive material was introduced into China; the regulatory system of China began with international standards, and walked towards the institutionalized. In 2003 the National People’s Congress (NPC) promulgated “the Act on the Prevention of Radioactive Pollution of the People's Republic of China”. In 2009 “Regulation for the Safe Transport of Radioactive Material” (Referred to “Regulation”) was promulgated by the State Council. Subsequently, the National Nuclear Safety Administration (NNSA) began to formulate executive detailed department rules, regulations guidelines and standards. The present system of acts, regulations and standards on management of safe transport of radioactive material in China and future planning were introduced in this paper. Meanwhile, the paper described the specific administration requirements of the Regulation on classification management of radioactive materials, license management of transport packaging including design, manufacture and use, licensing management of transport activities and the provisions of illegal behaviors arising in safe transport of radioactive material. (author)

Risk-based Regulatory Evaluation Program methodology

International Nuclear Information System (INIS)

DuCharme, A.R.; Sanders, G.A.; Carlson, D.D.; Asselin, S.V.

1987-01-01

The objectives of this DOE-supported Regulatory Evaluation Progrwam are to analyze and evaluate the safety importance and economic significance of existing regulatory guidance in order to assist in the improvement of the regulatory process for current generation and future design reactors. A risk-based cost-benefit methodology was developed to evaluate the safety benefit and cost of specific regulations or Standard Review Plan sections. Risk-based methods can be used in lieu of or in combination with deterministic methods in developing regulatory requirements and reaching regulatory decisions

Global Regulatory Differences for Gene- and Cell-Based Therapies

DEFF Research Database (Denmark)

Coppens, Delphi G M; De Bruin, Marie L; Leufkens, Hubert G M

2017-01-01

Gene- and cell-based therapies (GCTs) offer potential new treatment options for unmet medical needs. However, the use of conventional regulatory requirements for medicinal products to approve GCTs may impede patient access and therapeutic innovation. Furthermore, requirements differ between...... jurisdictions, complicating the global regulatory landscape. We provide a comparative overview of regulatory requirements for GCT approval in five jurisdictions and hypothesize on the consequences of the observed global differences on patient access and therapeutic innovation....

NRC regulatory agenda

International Nuclear Information System (INIS)

1993-07-01

The NRC Regulatory Agenda is a compilation of all rules on which the NRC has recently completed action, or has proposed action, or is considering action, and all petitions for rulemaking which have been received by the Commission and are pending disposition by the Commission. The Regulatory Agenda is updated and issued each quarter. The rules on which final action has been taken since March 31, 1993 are: Repeal of NRC standards of conduct; Fitness-for-duty requirements for licensees who possess, use, or transport Category I material; Training and qualification of nuclear power plant personnel; Monitoring the effectiveness of maintenance at nuclear power plants; Licensing requirements for land disposal of radioactive wastes; and Licensees' announcements of safeguards inspections

Legislative framework and regulatory requirements for the introduction of nuclear power

International Nuclear Information System (INIS)

Ha-Vinh, Phuong

1975-01-01

The adoption of appropriate legislation is to be considered as a prerequisite to the introduction of nuclear power in view of the issues that need to be regulated. Preparatory steps should be started at the earliest stage in conjunction with the planning of nuclear power projects. The primary objectives of a licensing scheme are to ensure safety, public health and environmental protection as well as financial protection for third parties in case of nuclear incident. For licensing purposes, a legislative framework and regulatory determinations are required. Within such a framework and pursuant to such regulatory determinations, the elaboration of safety standards, rules, guides and enforcement procedures is to be considered of paramount importance. To this end a number of international recommendations and advisory material prepared by the IAEA provide useful guidance. A licensing process would normally be split into several stages relating to site approval, construction permit, pre-operational tests, and operating licence, each stage being subject to safety assessments and reviews as determined by regulations. Financial protection against nuclear damage has also to be insured. A special regime of nuclear liability has been established by international conventions, based on the principle of strict liability of the operator of a nuclear installation. As a result of such channelling of liability to him, his liability is limited in amount and time. This liability system has the dual purpose of ensuring appropriate protection for potential victims and of relieving the nuclear industry from unlimited liability risks, which would impede practical applications of atomic energy. For the elaboration of nuclear legislation and specialized regulations the Agency's advisory services have proved to be of help to countries embarking on a nuclear power programme. (author)

Regulatory systems-based licensing guidance documentation

International Nuclear Information System (INIS)

Delligatti, M.S.

1991-01-01

The US Nuclear Regulatory Commission (NRC) has developed a series of licensing guidance documents based on the regulatory requirements in Part 60 of Title 10 of the Code of Federal Regulations (10 CFR Part 60). This regulatory systems-based approach to licensing guidance documentation relies on the definition of the high-level waste repository in 10 CFR Part 60. A document which is important for the frame-work it gives to other programmatic licensing guidance is the Draft Regulatory Guide open-quotes Format and Content for the License Application for the High-Level Waste Repositoryclose quotes (FCRG). The FCRG describes a format and content acceptable to NRC for a high-level waste repository license application pursuant to the requirements of 10 CFR Part 60. Other licensing guidance documents will be compatible with the FCRG

Quality assurance within regulatory bodies

International Nuclear Information System (INIS)

1999-06-01

The IAEA directed extensive efforts during the years 1991 to 1995 to the integral revision of all NUSS quality assurance publications, which were approved and issued as Safety Series No.50-C/SG-Q, Quality Assurance for Safety in Nuclear Power Plants and other Nuclear Installations (1996). When these quality assurance publications were developed, their prime focus was on requirements against which work performed by the licensees could be measured and assessed by the regulatory bodies. In this way, they only helped to facilitate the functions of regulators. No requirements or recommendations were provided on how the regulators should ensure the effective implementation of their own activities. The present publication is a first attempt to collect, integrate and offer available experience to directly support performance of regulatory activities. It presents a comprehensive compilation on the application of quality assurance principles and methods by regulatory bodies to their activities. The aim is consistent good performance of regulatory activities through a systematic approach

Nuclear Regulatory Commission: more aggressive leadership needed

International Nuclear Information System (INIS)

Staats, E.B.

1980-01-01

The Energy Reorganization Act of 1974 which established the Nuclear Regulatory Commission required GAO to evaluate the Commission's performance by January 18, 1980. This report responds to that requirement. GAO concluded that, although improvements have been made, the Commission's nuclear regulatory performance can be characterized best as slow, indecisive, cautious - in a word, complacent. This has largely resulted from a lack of aggressive leadership as evidenced by the Commissioners' failure to establish regulatory goals, control policymaking, and most importantly, clearly define their roles in nuclear regulation

Evaluation of research reactor fuel reliability in support of regulatory requirements

International Nuclear Information System (INIS)

Sokolov, Eugene N.

2005-01-01

This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

Evaluation of research reactor fuel reliability in support of regulatory requirements

Energy Technology Data Exchange (ETDEWEB)

Sokolov, Eugene N [Chalk River Laboratories, AECL, Chalk River, ON, K0J 1J0 (Canada)

2005-07-01

This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

Development of guidance on applications of regulatory requirements for regulating large, contaminated equipment and large decommissioning and decontamination (D and D) components

International Nuclear Information System (INIS)

Pope, R.B.; Easton, E.P.; Cook, J.R.; Boyle, R.W.

1997-01-01

In 1985, the International Atomic Energy Agency issued revised regulations for the safe transport of radioactive material. Significant were major changes to requirements for Low Specific Activity (LSA) material and Surface Contaminated Objects (SCOs). As these requirements were adopted into regulations in the United States, it was recognised that guidance on how to apply these requirements to large, contaminated/activated pieces of equipment and decommissioning and decontamination (D and D) objects would be needed both by the regulators and those regulated to clarify technical uncertainties and ensure implementation. Thus, the US Department of Transportation and the US Nuclear Regulatory Commission, with assistance of staff from Oak Ridge National Laboratory, are preparing regulatory guidance which will present examples of acceptable methods for demonstrating compliance with the revised rules for large items. Concepts being investigated for inclusion in the pending guidance are discussed in this paper. Under current plans, the guidance will be issued for public comment before final issuance in 1997. (Author)

Development of guidance on applications of regulatory requirements for regulating large, contaminated equipment and large decommissioning and decontamination (D and D) components

International Nuclear Information System (INIS)

Pope, R.B.; Easton, E.P.; Cook, J.R.; Boyle, R.W.

1997-01-01

In 1985, the International Atomic Energy Agency issued revised regulations for the safe transport of radioactive material. Significant were major changes to requirements for Low Specific Activity material and Surface Contaminated Objects. As these requirements were adopted into regulations in the US, it was recognized that guidance on how to apply these requirements to large, contaminated/activated pieces of equipment and decommissioning and decontamination objects would be needed both by the regulators and those regulated to clarify technical uncertainties and ensure implementation. Thus, the US Department of Transportation and the US Nuclear Regulatory Commission, with assistance of staff from Oak Ridge National Laboratory, are preparing regulatory guidance which will present examples of acceptable methods for demonstrating compliance with the revised rules for large items. Concepts being investigated for inclusion in the pending guidance are discussed in this paper. Under current plans, the guidance will be issued for public comment before final issuance in 1997

47 CFR 1.1160 - Refunds of regulatory fees.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Refunds of regulatory fees. 1.1160 Section 1... Statutory Charges and Procedures for Payment § 1.1160 Refunds of regulatory fees. (a) Regulatory fees will be refunded, upon request, only in the following instances: (1) When no regulatory fee is required or...

Regulatory cross-cutting topics for fuel cycle facilities.

Energy Technology Data Exchange (ETDEWEB)

Denman, Matthew R.; Brown, Jason; Goldmann, Andrew Scott; Louie, David

2013-10-01

This report overviews crosscutting regulatory topics for nuclear fuel cycle facilities for use in the Fuel Cycle Research & Development Nuclear Fuel Cycle Evaluation and Screening study. In particular, the regulatory infrastructure and analysis capability is assessed for the following topical areas: Fire Regulations (i.e., how applicable are current Nuclear Regulatory Commission (NRC) and/or International Atomic Energy Agency (IAEA) fire regulations to advance fuel cycle facilities) Consequence Assessment (i.e., how applicable are current radionuclide transportation tools to support risk-informed regulations and Level 2 and/or 3 PRA) While not addressed in detail, the following regulatory topic is also discussed: Integrated Security, Safeguard and Safety Requirement (i.e., how applicable are current Nuclear Regulatory Commission (NRC) regulations to future fuel cycle facilities which will likely be required to balance the sometimes conflicting Material Accountability, Security, and Safety requirements.)

13 CFR 120.463 - Regulatory accounting-What are SBA's regulatory accounting requirements for SBA Supervised Lenders?

Science.gov (United States)

2010-01-01

... basis in accordance with Generally Accepted Accounting Principles (GAAP) as promulgated by the Financial Accounting Standards Board (FASB), supplemented by Regulatory Accounting Principles (RAP) as identified by... set forth in FASB Statement of Financial Accounting Standards No. 15, Accounting by Debtors and...

Virginia Power's regulatory reduction program

International Nuclear Information System (INIS)

Miller, G.D.

1996-01-01

Virginia Power has two nuclear plants, North Anna and Surry Power Stations, which have two units each for a total of four nuclear units. In 1992, the Nuclear Regulatory Commission solicited comments from the nuclear industry to obtain their ideas for reducing the regulatory burden on nuclear facilities. Pursuant to the new regulatory climate, Virginia Power developed an internal program to evaluate and assess the regulatory and self-imposed requirements to which they were committed, and to pursue regulatory relief or internal changes where possible and appropriate. The criteria were that public safety must be maintained, and savings must be significant. Up to the date of the conference, over US$22 million of one-time saving had been effected, and US$2.75 million in annual savings

76 FR 6587 - Pennsylvania Regulatory Program

Science.gov (United States)

2011-02-07

... [PA-159-FOR; OSM 2010-0017] Pennsylvania Regulatory Program AGENCY: Office of Surface Mining... remove a required amendment to the Pennsylvania regulatory program (the ``Pennsylvania program'') under... program amendment codified in the Federal regulations, Pennsylvania has submitted information that it...

The current regulatory requirements on optimisation and BAT in Sweden in the context of geological disposal

International Nuclear Information System (INIS)

Dverstorp, B.

2010-01-01

Bjorn Dverstorp, Swedish Radiation Safety authority (SSM) presented 'The current regulatory requirements on optimisation and BAT in Sweden in the context of geological disposal'. In Sweden, a nuclear waste repository will be evaluated according to both to general environmental legislation (the Environmental Code, SFS, 1998:808) and according to more specific requirements in the Act on Nuclear Activities (SFS, 1984:3) and the Radiation Protection Act (SFS, 1988:220). The evaluations according to these laws will be carried out according to two separate, but coordinated, legal-review and decision-making processes. This will be a basis for the siting process. Although the requirements on BAT and siting in the Environmental Code apply to radiological protection, they aim at a broader system optimisation. The more specific requirements on optimisation and BAT of radiological protection of geological disposal systems are given in the regulations associated with the Radiation Protection Act. The Swedish radiation protection regulations (SSM, 2009) comprise three corner stones: a risk target, environmental protection goals and the use of optimisation and BAT. In SSM' s guidance optimisation is defined as a means to reduce risk, guided by the results of risk calculations. In case of a conflict between BAT and optimisation, measures satisfying BAT should have priority. Application of optimisation and BAT on different timescales are described as well as for human intrusion scenarios. B. Dverstorp explained that because of uncertainties in the long term there is a need for additional arguments in the safety case in support of decision making. It is in this context that the requirements on optimisation and BAT should be seen as supplementary to the risk target, in providing evidence that the developer has taken into consideration, as far as reasonably possible, measures and options for reducing future doses and risks. Both principles focus on the proponent's work on developing

ENSI’s regulatory framework strategy

International Nuclear Information System (INIS)

2015-03-01

This short brochure issued by the Swiss Federal Nuclear Safety Inspectorate ENSI defines the organisation’s regulatory framework strategy. Six guiding principles are declared and discussed: Comprehensive harmonisation with relevant international requirements, basing the regulatory framework on existing, tried-and-tested regulations, issuing of its own guidelines only when it is necessary to do so, guidelines to be drawn up transparently and with the involvement of all stakeholders and basing the level of detail of its regulatory framework on hazard potential and risk

Ego depletion and positive illusions: does the construction of positivity require regulatory resources?

Science.gov (United States)

Fischer, Peter; Greitemeyer, Tobias; Frey, Dieter

2007-09-01

Individuals frequently exhibit positive illusions about their own abilities, their possibilities to control their environment, and future expectations. The authors propose that positive illusions require resources of self-control, which is considered to be a limited resource similar to energy or strength. Five studies revealed that people with depleted self-regulatory resources indeed exhibited a less-optimistic sense of their own abilities (Study 1), a lower sense of subjective control (Study 2), and less-optimistic expectations about their future (Study 3). Two further studies shed light on the underlying psychological process: Ego-depleted (compared to nondepleted) individuals generated/retrieved less positive self-relevant attributes (Studies 4 and 5) and reported a lower sense of general self-efficacy (Study 5), which both partially mediated the impact of ego depletion on positive self-views (Study 5).

14 CFR 313.4 - Major regulatory actions.

Science.gov (United States)

2010-01-01

...) PROCEDURAL REGULATIONS IMPLEMENTATION OF THE ENERGY POLICY AND CONSERVATION ACT § 313.4 Major regulatory... of actions shall not be deemed as major regulatory actions requiring an energy statement: (1) Tariff...

Regulatory framework and safety requirements for new (gen III) reactors

International Nuclear Information System (INIS)

Mourlon, Sophie

2014-01-01

Sophie Mourlon, ASN Deputy General Director, described the international process to enhance safety between local safety authorities through organizations such as WENRA. Then she explained to the participants the regulatory issues for the next generation of NPPs

Regulatory Considerations for the Long Term Cooling Safe Shutdown Requirements of the Passive Residual Heat Removal Systems in Advanced Reactors

International Nuclear Information System (INIS)

Sim, S. K.; Bae, S. H.; Kim, Y. S.; Hwang, Min Jeong; Bang, Young Seok; Hwang, Taesuk

2016-01-01

USNRC approved safe shutdown at 215.6 .deg. C for a safe and long term cooling state for the redundant passive RHRSs by SECY-94-084. USNRC issued COLA(Combined Construction and Operating License) for the Levy County NP Unit-1/2 for the AP1000 passive RHRSs in 2014. Korea Hydro and Nuclear Power(KHNP) is developing APR+ and adopted Passive Auxiliary Feedwater System(PAFS) as a new passive RHRS design. Korea Institute of Nuclear Safety(KINS) has been developing regulatory guides for the advanced safety design features of the advanced ALWRs which has plan to construct in near future in Korea[5]. Safety and regulatory issues as well as the safe shut down requirements of the passive RHRS are discussed and considerations in developing regulatory guides for the passive RHRS are presented herein. Passive RHRSs have been introduced as new safety design features for the advanced reactors under development in Korea. These passive RHRSs have potential advantages over existing active RHRS, however, their functions are limited due to inherent ability of passive heat removal processes. It is high time to evaluate the performance of the passive PRHRs and develop regulatory guides for the safety as well as the performance analyses of the passive RHRS

Private Equity and Regulatory Capital

NARCIS (Netherlands)

Bongaerts, D.; Charlier, E.

2008-01-01

Regulatory Capital requirements for European banks have been put forward in the Basel II Capital Framework and subsequently in the Capital Requirements Directive (CRD) of the EU. We provide a detailed discussion of the capital requirements for private equity investments under the simple risk weight

Nuclear Regulatory Infrastructure in the Philippines

International Nuclear Information System (INIS)

Leonin, Teofilo V. Jr.

2015-01-01

Regulating the use of radioactive materials in the Philippines involves the adherence to legislation, regulations, standards and regulatory guides. It is based on a detailed review and assessment of the radiation safety program of owners and users of these materials and associated equipment against safety requirements and on additional verification of the operating practices and procedures. Republic Acts 5207 and 2067, both as amended, are implemented through the regulations which are titled Code of PNRI Regulations or CPRs are developed and issued together with supporting regulatory guides, Bulletins and other documents detailing the safety requirements. These issuance adhere to internationally accepted requirements on radiation protection, and nuclear safety and security, as well as safeguards. Design documents and technical Specifications of important radioactive materials, equipment and components are required to be submitted and reviewed by the PNRI before the issuance of an authorization in the form of a license Verification of adherence to regulations and safety requirements are periodically checked through the implementation of an inspection and enforcement program. The ISO certified regulatory management system of PNRI is documented in a QMS manual that provides guidance on all work processes. It involves systematic planning and evaluation of activities, multiple means of getting feedback on the work processes, and continuous efforts to improve its effectiveness. Efforts are implemented in order to strengthen the transparency openness, independence, technical competence and effectiveness of the regulatory body. (author)

[European Union regulatory and quality requirements for botanical drugs and their implications for Chinese herbal medicinal products development].

Science.gov (United States)

Zhu, You-Ping

2017-06-01

This paper introduces regulatory pathways and characteristic quality requirements for marketing authorization of herbal medicinal products in the European Union（EU）, and the legal status and applications of "European Union list of herbal substances, preparations and combinations" and "European Union herbal monographs". Also introduced are Chinese herbs that have been granted the EU list entry, those with EU herbal monographs, and registered EU traditional herbal medicinal products with Chinese herbs as active ingredients. Special attention is paid to the technical details of three authorized EU herbal medicinal products (Veregen, Sativex and Episalvan) in comparison with Andrographis paniculata extract HMPL-004 that failed the phase Ⅲ clinical trial for ulcerative colitis. The paper further emphasizes the importance of enriching active fractions of herbal extracts and taking regulatory and quality considerations into account in early stage of botanical drug development. Copyright© by the Chinese Pharmaceutical Association.

Requirements for US regulatory approval of the International Thermonuclear Experimental Reactor (ITER)

International Nuclear Information System (INIS)

Petti, D.A.; Haire, J.C.

1993-12-01

The International Thermonuclear Experimental Reactor (ITER) is the first fusion machine that will have sufficient decay heat and activation product inventory to pose potential nuclear safety concerns. As a result, nuclear safety and environmental issues will be much more important in the approval process for the design, siting, construction, and operation of ITER in the United States than previous fusion devices, such as the Tokamak Fusion Test Reactor. The purpose of this report is (a) to provide an overview of the regulatory approval process for a Department of Energy (DOE) nuclear facility; (b) to present the dose limits used by DOE to protect workers, the public, and the environment from the risks of exposure to radiation and hazardous materials; (c) to discuss some key nuclear safety-related issues that must be addressed early in the Engineering Design Activities (EDA) to obtain regulatory approval; and (d) to provide general guidelines to the ITER Joint Central Team (JCT) concerning the development of a regulatory framework for the ITER project

Understanding how to maintain compliance in the current regulatory climate

International Nuclear Information System (INIS)

Bignell, D.T.; Burns, R.

1995-01-01

High level radioactive waste facilities must maintain compliance with all regulatory requirements, even those requirements that have been promulgated after the facility was placed into operation. Facilities must aggressively pursue compliance because environmental laws often impose strict liability for violations; therefore, an honest mistake is no defense. Radioactive waste management is constantly under the public microscope, particularly those facilities that handle high-level radioactive waste. The Savannah River Site has effectively met the challenges of regulatory compliance in its HLRW facilities and plans are being formulated to meet future regulatory requirements as well. Understanding, aggressively achieving, and clearly demonstrating compliance is essential for the continued operations of radioactive waste management facilities. This paper examines how HLRW facilities are impacted by regulatory requirements and how compliance in this difficult area is achieved and maintained

Regulatory requirements for the transport of radioactive materials in Canada

Energy Technology Data Exchange (ETDEWEB)

Garg, R. [Canadian Nuclear Safety Commission, Ottawa (Canada)

2004-07-01

Canada is a major producer and shipper of radioactive material. Each year more than a million packages are transported in Canada. The safety record with the transport of RAM in Canada has historically been excellent. There have never been any serious injuries, overexposure or fatality or environmental consequences attributable to the radioactive nature of such material being transported or being involved in a transport accident. In Canada, the Canadian Nuclear Safety Commission (CNSC) is the prime agency of the federal government entrusted with regulating all activities related to the use of nuclear energy and nuclear substances including the packaging and transport of nuclear substances. The mission of the CNSC is to regulate the use of nuclear energy and materials to protect health, safety, security of the person and the environment and to respect Canada's international commitments on the peaceful use of nuclear energy. The division of responsibility for the regulation of transport of radioactive material has been split between Transport Canada and the CNSC. The governing Transport Canada's regulations are Transport of Dangerous Goods (TDG) Regulations and the CNSC regulations are Packaging and Transport of Nuclear Substances Regulations (PTNSR). Canada has actively participated in the development of the IAEA regulations for the safe transport of radioactive material since 1960. As an IAEA member state, Canada generally follows the requirements of IAEA regulations with few deviations. The Nuclear Safety and Control Act (NSCA) strongly supports Canada's international obligations to ensure safe packaging, transport, storage and disposal of nuclear substances, prescribed equipment and prescribed information. Prescribed equipment and prescribed information are defined in the CNSC General Nuclear Safety and Control Regulations. This paper presents the current CNSC regulatory requirements and initiatives taken by the CNSC to improve its effectiveness and

Regulatory requirements for the transport of radioactive materials in Canada

International Nuclear Information System (INIS)

Garg, R.

2004-01-01

Canada is a major producer and shipper of radioactive material. Each year more than a million packages are transported in Canada. The safety record with the transport of RAM in Canada has historically been excellent. There have never been any serious injuries, overexposure or fatality or environmental consequences attributable to the radioactive nature of such material being transported or being involved in a transport accident. In Canada, the Canadian Nuclear Safety Commission (CNSC) is the prime agency of the federal government entrusted with regulating all activities related to the use of nuclear energy and nuclear substances including the packaging and transport of nuclear substances. The mission of the CNSC is to regulate the use of nuclear energy and materials to protect health, safety, security of the person and the environment and to respect Canada's international commitments on the peaceful use of nuclear energy. The division of responsibility for the regulation of transport of radioactive material has been split between Transport Canada and the CNSC. The governing Transport Canada's regulations are Transport of Dangerous Goods (TDG) Regulations and the CNSC regulations are Packaging and Transport of Nuclear Substances Regulations (PTNSR). Canada has actively participated in the development of the IAEA regulations for the safe transport of radioactive material since 1960. As an IAEA member state, Canada generally follows the requirements of IAEA regulations with few deviations. The Nuclear Safety and Control Act (NSCA) strongly supports Canada's international obligations to ensure safe packaging, transport, storage and disposal of nuclear substances, prescribed equipment and prescribed information. Prescribed equipment and prescribed information are defined in the CNSC General Nuclear Safety and Control Regulations. This paper presents the current CNSC regulatory requirements and initiatives taken by the CNSC to improve its effectiveness and efficiency

76 FR 64043 - Iowa Regulatory Program

Science.gov (United States)

2011-10-17

...) Requirements for permits for special categories of mining. 27--40.41(207) Permanent regulatory program--small... DEPARTMENT OF THE INTERIOR Office of Surface Mining Reclamation and Enforcement 30 CFR Part 915 [Docket No. IA-016-FOR; Docket ID: OSM-2011-0014] Iowa Regulatory Program AGENCY: Office of Surface Mining...

Regulatory issues in the maintenance of Argentine nuclear power plants

International Nuclear Information System (INIS)

Castro, E.; Caruso, G.

1997-01-01

The influence of maintenance activities upon nuclear safety and their relevance as means to detect and prevent aging make them play an outstanding role among the fields of interest of the Argentine nuclear regulatory body (ENREN). Such interest is reinforced by the fact that the data obtained during maintenance are used - among other - as inputs in the Probabilistic Safety Analyses required for those nuclear power plants. This paper provides a brief description of the original requirements by the regulatory body concerning maintenance, of the factors that led to review the criteria involved in such requirements and of the key items identified during the reviewing process. The latter shall be taken into account in the maintenance regulatory policy, for the consequent issue of new requirements from the utilities and for the eventual publication of a specific regulatory standard. (author)

FORECAST: Regulatory effects cost analysis software annual

International Nuclear Information System (INIS)

Lopez, B.; Sciacca, F.W.

1991-11-01

Over the past several years the NRC has developed a generic cost methodology for the quantification of cost/economic impacts associated with a wide range of new or revised regulatory requirements. This methodology has been developed to aid the NRC in preparing Regulatory Impact Analyses (RIAs). These generic costing methods can be useful in quantifying impacts both to industry and to the NRC. The FORECAST program was developed to facilitate the use of the generic costing methodology. This PC program integrates the major cost considerations that may be required because of a regulatory change. FORECAST automates much of the calculations typically needed in an RIA and thus reduces the time and labor required to perform these analysis. More importantly, its integrated and consistent treatment of the different cost elements should help assure comprehensiveness, uniformity, and accuracy in the preparation of needed cost estimates

Regulatory agencies and regulatory risk

OpenAIRE

Knieps, Günter; Weiß, Hans-Jörg

2008-01-01

The aim of this paper is to show that regulatory risk is due to the discretionary behaviour of regulatory agencies, caused by a too extensive regulatory mandate provided by the legislator. The normative point of reference and a behavioural model of regulatory agencies based on the positive theory of regulation are presented. Regulatory risk with regard to the future behaviour of regulatory agencies is modelled as the consequence of the ex ante uncertainty about the relative influence of inter...

A Review on Regulatory Enforcement Policy

International Nuclear Information System (INIS)

Lim, Ji Han; Lee, Kyung Joo; Choi, Young Sung

2017-01-01

This paper examine the meaning and principle of enforcement through examples from other countries. Regulatory enforcement is the last stage of safety regulation and how it is exercised when one failing to meet regulatory requirements can have significant ripple effect across the industry. Thus, right philosophy and principle should be established. It is not recommended to emphasize neither deterrence approach nor behavior modification approach. This should be also taken into consideration when setting up the principle and system of regulatory enforcement. In the process of Vienna Declaration, Europe and the U.S showed the fundamental differences in their approaches to safety regulation. Considering this, it is required to remain cautious at all times on what to be improved in the aspect of internal consistency within our system and also in the aspect of procedure.

Regulatory control of fuel design and manufacturing

International Nuclear Information System (INIS)

1994-01-01

The regulatory control of the design and manufacturing of the nuclear fuel and of the control rods aims to ensure conformance to set requirements during normal operating conditions, anticipated operational transients and postulated accident conditions. The regulatory control of design, manufacturing, receiving inspections and the start of operation of the nuclear fuel are specified in the guide. The regulatory control procedure also applies to the control rods and the shield elements

A comparison of immunotoxic effects of nanomedicinal products with regulatory immunotoxicity testing requirements.

Science.gov (United States)

Giannakou, Christina; Park, Margriet Vdz; de Jong, Wim H; van Loveren, Henk; Vandebriel, Rob J; Geertsma, Robert E

2016-01-01

Nanomaterials (NMs) are attractive for biomedical and pharmaceutical applications because of their unique physicochemical and biological properties. A major application area of NMs is drug delivery. Many nanomedicinal products (NMPs) currently on the market or in clinical trials are most often based on liposomal products or polymer conjugates. NMPs can be designed to target specific tissues, eg, tumors. In virtually all cases, NMPs will eventually reach the immune system. It has been shown that most NMs end up in organs of the mononuclear phagocytic system, notably liver and spleen. Adverse immune effects, including allergy, hypersensitivity, and immunosuppression, have been reported after NMP administration. Interactions of NMPs with the immune system may therefore constitute important side effects. Currently, no regulatory documents are specifically dedicated to evaluate the immunotoxicity of NMs or NMPs. Their immunotoxicity assessment is performed based on existing guidelines for conventional substances or medicinal products. Due to the unique properties of NMPs when compared with conventional medicinal products, it is uncertain whether the currently prescribed set of tests provides sufficient information for an adequate evaluation of potential immunotoxicity of NMPs. The aim of this study was therefore, to compare the current regulatory immunotoxicity testing requirements with the accumulating knowledge on immunotoxic effects of NMPs in order to identify potential gaps in the safety assessment. This comparison showed that immunotoxic effects, such as complement activation-related pseudoallergy, myelosuppression, inflammasome activation, and hypersensitivity, are not readily detected by using current testing guidelines. Immunotoxicity of NMPs would be more accurately evaluated by an expanded testing strategy that is equipped to stratify applicable testing for the various types of NMPs.

Defining regulatory requirements for water supply systems in Vietnam

Directory of Open Access Journals (Sweden)

Deryushev Leonid Georgiyevich

2014-01-01

Full Text Available In the article the authors offer their suggestions for improving the reliability of the standardization requirements for water supply facilities in Vietnam, as an analog of building regulations of Russia 31.13330.2012. In Russia and other advanced countries the reliability of the designed water supply systems is usual to assess quantitatively. Guidelines on the reliability assessment of water supply systems and facilities have been offered by many researchers, but these proposals are not officially approved. Some methods for assessing the reliability of water supply facilities are informally used in practice when describing their quality. These evaluation methods are simple and useful. However, the given estimations defy common sense and regulatory requirements used by all the organizations, ministries and departments, for example, of Russia, in the process of allowances for restoration and repair of water supply facilities. Inadequacy of the water supply facilities assessment is shown on the example of assessing the reliability of pipeline system. If we take MTBF of specific length of the pipeline as reliability index for a pipeline system, for example, 5 km, a pipeline of the similar gauge, material and working conditions with the length of 5 m, according to the estimation on the basis of non-official approach, must have a value of MTBF 1000 times greater than with the length of 5 km. This conclusion runs counter to common sense, for the reason that all the pipes in the area of 5 km are identical, have the same load and rate of wear (corrosion, fouling, deformation, etc.. It was theoretically and practically proved that products of the same type in the same operating conditions (excluding determined impact of a person, work as an entity, which MTBF is equal to the average lifetime. It is proposed to take the average service life as a reliability indicator of a pipeline. Durability, but not failsafety of the pipe guarantees pipeline functioning

Regulatory issues in accreditation of toxicology laboratories.

Science.gov (United States)

Bissell, Michael G

2012-09-01

Clinical toxicology laboratories and forensic toxicology laboratories operate in a highly regulated environment. This article outlines major US legal/regulatory issues and requirements relevant to accreditation of toxicology laboratories (state and local regulations are not covered in any depth). The most fundamental regulatory distinction involves the purposes for which the laboratory operates: clinical versus nonclinical. The applicable regulations and the requirements and options for operations depend most basically on this consideration, with clinical toxicology laboratories being directly subject to federal law including mandated options for accreditation and forensic toxicology laboratories being subject to degrees of voluntary or state government–required accreditation.

The regulatory framework in the UK

International Nuclear Information System (INIS)

O'Sullivan, R.

1984-01-01

The subject is covered in sections, headed: basic regulatory requirements covering the transport of radioactive material in the UK; responsibility for safety (competent authority; provision of regulations; implementation of regulations (international and national); design of transport flask; safety case; testing; assessment; approval certificate; compliance assurance; administration); advice and information on the regulatory safety standards. (U.K.)

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (French Edition); Cadre gouvernemental, legislatif et reglementaire de la surete. Prescriptions generales de surete. Partie 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered.

Governmental, Legal and Regulatory Framework for Safety. General Safety Requirements. Part 1 (Spanish Edition); Marco gubernamental, juridico y regulador para la seguridad. Requisitos de Seguridad Generales. Parte 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

The objective of this publication is to establish requirements in respect of the governmental, legal and regulatory framework for safety. It covers the essential aspects of the framework for establishing a regulatory body and taking other actions necessary to ensure the effective regulatory control of facilities and activities utilized for peaceful purposes. Other responsibilities and functions, such as liaison within the global safety regime and on support services for safety (including radiation protection), emergency preparedness and response, nuclear security, and the State system of accounting for and control of nuclear material, are also covered.

Technical area status report for second-stage destruction and offgas treatment

International Nuclear Information System (INIS)

French, N.B.; Dalton, J.D.; Vavruska, J.

1994-08-01

This report was sponsored by the Mixed Waste Integrated Program (MWIP), which was established by the Department of Energy (DOE), Office of Environmental Restoration and Waste Management (EM), Office of Technology Development (OTD). DOE/EM carries the charter to direct and coordinate waste management and site remediation throughout the DOE complex. Within EM, the OTD established the MWIP to identify and develop new technologies for treatment of DOE low-level mixed waste. This report represents the second TASR for the Second-Stage Destruction and Offgas Treatment technical area. This TASR updates technology information, a design methodology for air pollution control systems for mixed waste treatment, and technology development needs for DOE/EM. The TASRs form the basis of a technology development program that addresses the highest priority DOE environmental needs and is coordinated with other technology development efforts both inside and outside DOE. The main functions of the second-stage destruction and offgas treatment system are to treat the gaseous effluent from the primary treatment process to acceptable levels for release to the atmosphere. Specific functions include (1) destruction of volatile organics; (2) capture of particulate matter; (3) capture of volatile metals; (4) capture and control of volatile, condensed-phase, and solid-phase radionuclides; (5) control of acid gases; (6) NO x abatement; and (7) gas cooling and reheating as required to perform these functions

Waste management from reprocessing: a stringent regulatory requirements for high quality conditioned residues

International Nuclear Information System (INIS)

Bordier, J. C.; Greneche, D.; Devezeaux, J. G.; Dalcorso, J.

2000-01-01

Nuclear waste production and management in France is governed by safety requirements imposed to all operators. French nuclear safety relies on two basic principles: · Responsibility of the nuclear operator, which expands to waste generated, · Safety basic objectives issued by national Safety Authority. For a long time the regulatory framework for waste production and management has been satisfactorily applied and has benefited to each actor of the process. LLW/MLW and HLW nuclear waste are currently conditioned in safe matrices or packages either likely to be disposed in surface repositories or designed with the intention to be disposed underground according to their radioactive content. France is looking into the case of VLLW and has already carried out a design for future disposal, the design being in the pipe. Other types of waste (i. e. radium bearing waste, graphite, and tritium content waste) are also considered in the whole framework of French waste management. (author)

Canadian and international approaches to regulatory effectiveness

International Nuclear Information System (INIS)

Lojk, R.

2014-01-01

Regulatory effectiveness is an important attribute of any regulator, particularly nuclear regulators. As the nuclear industry has matured, and as the social landscape has changed, so have views on what constitutes regulatory effectiveness. Canada has evolved its regulatory structure and modernized its legislative framework and technical requirements and guidance over time. In addition, Canada continues to collaborate with international agencies, particularly the NEA and the IAEA, to ensure that there is a common understanding of the indicators and key attributes of regulatory effectiveness. This paper discusses Canadian and international views on the subject, including perspectives from other industries. (author)

A 3D bioprinting exemplar of the consequences of the regulatory requirements on customized processes.

Science.gov (United States)

Hourd, Paul; Medcalf, Nicholas; Segal, Joel; Williams, David J

2015-01-01

Computer-aided 3D printing approaches to the industrial production of customized 3D functional living constructs for restoration of tissue and organ function face significant regulatory challenges. Using the manufacture of a customized, 3D-bioprinted nasal implant as a well-informed but hypothetical exemplar, we examine how these products might be regulated. Existing EU and USA regulatory frameworks do not account for the differences between 3D printing and conventional manufacturing methods or the ability to create individual customized products using mechanized rather than craft approaches. Already subject to extensive regulatory control, issues related to control of the computer-aided design to manufacture process and the associated software system chain present additional scientific and regulatory challenges for manufacturers of these complex 3D-bioprinted advanced combination products.

Decommissioning of uranium mines and mills - Canadian regulatory approach and experience

International Nuclear Information System (INIS)

Whitehead, W.

1986-09-01

At the time of the recent closures of the Agnew Lake, Beaverlodge and Madawaska Mines Limited uranium mining and milling facilities, several relevant regulatory initiatives, including the development of decommissioning criteria, were underway, or contemplated. In the absence of precedents, the regulatory agencies and companies involved adopted approaches to the decommissioning of these facilities that reflected site specific circumstances, federal and provincial regulatory requirements, and generally accepted principles of good engineering practice and environmental protection. This paper summarizes related historical and current regulatory policies, requirements and guidelines; including those implemented at the three decommissioned sites

Franchise Values, Regulatory Monitoring, and Capital Requirements in Optimal Bank Regulation

DEFF Research Database (Denmark)

Andersen, Thomas Barnebeck; Harr, Thomas

2008-01-01

This paper demonstrates that financial deregulation is likely to make standard prudential regulatory instruments less effective in curbing excessive risk-taking incentives among banks. This has interesting implications for optimal bank regulation. When there is an increase in competition, the opt...

Regulatory Control of Radiation Sources. Safety Guide

International Nuclear Information System (INIS)

2009-01-01

This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

Fabrication of sterile experimental radiopharmaceuticals: technical and regulatory requirements

International Nuclear Information System (INIS)

Briand, S.

2008-03-01

The radiopharmaceuticals devoted to the biomedical research were the object of the directive 2001/20/C.E. transposition that defined again the conditions of implementation of biomedical research using drugs at human use, whom authorization is delivered by A.f.s.s.a.p.s.. In an other hand the law 2006-686 of the 13. june 2006 ( called law T.S.N.) has modified the regulatory dispositions relative to the radiation protection norms. These new dispositions allow to the health facilities to realize their research projects without difficulties for experimental drugs supply. (N.C.)

Structure and drafting of safeguards regulatory documents

International Nuclear Information System (INIS)

Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

1977-09-01

This study develops hypothesis about the relation between the structure and drafting of safeguards regulatory documents and the ability of document users to understand and implement them in a way that reflects the intent and requirements of the NRC. Four decisions are needed to improve communication: (1) Should improvement of safeguards regulatory documents as communication instruments be an explicit NRC program. (2) What specific methods of communication should be the focus of improvement efforts. (3) What actions to improve communications are feasible and desirable. (4) How should the NRC divide its available effort and resources among desirable actions in order to provide the most effective communication through regulatory documents. This volume contains: introduction, conceptual bases, legal requirements, targets, choice of documents, preparation of documents, readability, and further study of recommended changes in structure and drafting

Regulatory difficulties in a developing country

International Nuclear Information System (INIS)

Jacobs, W.R. Jr.

1978-01-01

The regulatory agency assigned the task of regulating the initial entry into the field of nuclear power generation by a developing country has a very difficult job. Based on the authors' experience during the start-up and initial operation of Ko-Ri Unit I, the first power reactor in the Republic of Korea, observations on regulatory difficulties and recommendations for improved regulatory effectiveness are offered. The problem areas can be loosely grouped into three general categories: (1) Lack of adequate technical knowledge which is the basis for all effective regulation; (2) Difficulties with understanding and utilization of the required regulatory documentation; (3) Failure to establish the proper regulatory environment. Examples are cited from actual experience during the Ko-Ri Unit I start-up to demonstrate the impact that regulatory activities can have on a plant construction and testing programme. The problems encountered are not unique to developing countries but also exist in the United States of America. Recommendations are offered which should be beneficial to either newly formed regulatory agencies or agencies wishing to improve their abilities and effectiveness. These include: (1) Additional training of regulatory inspectors in plant operations; (2) Additional experience gained by participation in regulatory activities in other countries; (3) Increased attention given to regulatory documents, especially plant technical specifications; (4) Establishment of formal lines of communication between the utility and the regulatory agency; (5) Clear definition of regulatory responsibilities to avoid areas of overlapping jurisdiction; (6) Active participation by the regulatory staff very early in the project. It is hoped that these and other recommendations offered will greatly improve regulatory effectiveness and at the same time demonstrate that when the decision is made to 'go nuclear', a strong commitment must be made to develop and support a technically

A regulatory perspective on design and performance requirements for engineered systems in high-level waste

International Nuclear Information System (INIS)

Bernero, R.M.

1992-01-01

For engineered systems, this paper gives an overview of some of the current activities at the U.S. Nuclear Regulatory Commission (NRC), with the intent of elucidating how the regulatory process works in the management of high-level waste (HLW). Throughout the waste management cycle, starting with packaging and transportation, and continuing to final closure of a repository, these activities are directed at taking advantage of the prelicensing consultation period, a period in which the NRC, DOE and others can interact in ways that will reduce regulatory, technical and institutional uncertainties, and open the path to development and construction of a deep geologic repository for permanent disposal of HLW. Needed interactions in the HLW program are highlighted. Examples of HLW regulatory activities are given in discussions of a multipurpose-cask concept and of current NRC work on the meaning of the term substantially complete containment

78 FR 1634 - Regulatory Agenda

Science.gov (United States)

2013-01-08

... amendments include updates to organizational information, use of the term ``disability'' in lieu of the term.../00/13 Regulatory Flexibility Analysis Required: No. Agency Contact: Robert W. Cosgrove, External...

78 FR 44329 - Regulatory Agenda

Science.gov (United States)

2013-07-23

... amendments include updates to organizational information, use of the term ``disability'' in lieu of the term.../00/13 Regulatory Flexibility Analysis Required: No. Agency Contact: Robert W. Cosgrove, External...

Cost-benefit and regulatory decision making

International Nuclear Information System (INIS)

Harvie, J.

1996-01-01

The Atomic Energy Control Board is investigating the feasibility of developing methods for factoring cost-benefit considerations into its regulatory decision-making. This initiative results, in part, from the federal government policy requiring cost-benefit considerations to be taken into account in regulatory processes, and from the recommendations of an Advisory Panel on Regulatory Review in 1993, submitted to the Minister of Natural Resources Canada. One of these recommendations stated: 'that mechanisms be developed to examine cost benefit issues and work towards some consensus of opinion among stake holders: a task force on the subject could be an appropriate starting point'. (author)

U.S. regulatory requirements for nuclear plant license renewal: The B and W Owners Group License Renewal Program

International Nuclear Information System (INIS)

Staudinger, Deborah K.

2004-01-01

This paper discusses the current U.S. Regulatory Requirements for License Renewal and describes the Babcock and Wilcox Owners Group (B and WOG) Generic License Renewal Program (GLRP). The B and W owners, recognizing the need to obtain the maximum life for their nuclear generating units, embarked on a program to renew the licenses of the seven reactors in accordance with the requirements of the Atomic Energy Act of 1954 and further defined by Title 10 of the Code of Federal Regulation Part 54 (10 CFR 54). These reactors, owned by five separate utilities, are Pressurized Water Reactors (PWR) ranging in net rated capacity from approximately 800 to 900 MW. The plants, predominately constructed in the 70s, have USNRC Operating Licenses that expire between 2013 to 2017. (author)

Technical area status report for low-level mixed waste final waste forms

International Nuclear Information System (INIS)

Mayberry, J.L.; Huebner, T.L.; Ross, W.; Nakaoka, R.; Schumacher, R.; Cunnane, J.; Singh, D.; Darnell, R.; Greenhalgh, W.

1993-08-01

This report presents information on low-level mixed waste forms.The descriptions of the low-level mixed waste (LLMW) streams that are considered by the Mixed Waste Integrated Program (MWIP) are given in Appendix A. This information was taken from descriptions generated by the Mixed Waste Treatment Program (MWTP). Appendix B provides a list of characteristic properties initially considered by the Final Waste Form (FWF) Working Group (WG). A description of facilities available to test the various FWFs discussed in Volume I of DOE/MWIP-3 are given in Appendix C. Appendix D provides a summary of numerous articles that were reviewed on testing of FWFS. Information that was collected by the tests on the characteristic properties considered in this report are documented in Appendix D. The articles reviewed are not a comprehensive list, but are provided to give an indication of the data that are available

Regulatory perspectives of concept assessment

International Nuclear Information System (INIS)

Flavelle, Peter A.

1987-09-01

The Atomic Energy Control Board is the head agency for the regulatory review of the Assessment of the Canadian Concept for Nuclear Fuel Waste Disposal being done by Atomic Energy of Canada Limited and Ontario Hydro. This paper describes the regulatory perspective of how the Concept Assessment could demonstrate the feasibility of a disposal conforming to regulatory requirements. The long-term aspects of Concept Assessment encourage the use of various predictive techniques for different time scales. Each technique will have a different potential for establishing confidence in the predictions. The predicted performance of a facility during operation should have a very high confidence, as it can be based on standard engineering calculations and the predictions can be validated later by monitoring during operation. The predictions of the transient period following closure of the facility should achieve a medium level of confidence, since they can be based on extrapolations of predictions of operational performance, using models that can be calibrated with monitoring data and with averaged input data derived from natural analog studies. Predictions based on fundamental processes will have a medium level of confidence when made to intermediate times after closure. Long-term predictions using generic or typical input data or Monte Carlo calculations of simplified models will have the least confidence and yet they can still contribute to the confidence that the disposal concept will conform to regulatory requirements

Regulatory Requirements to Combat Illicit Trafficking of Hazardous Materials

International Nuclear Information System (INIS)

Hussein, A.Z.; Zakaria, Kh.M.

2011-01-01

Since more than a decade illicit Trafficking of hazardous ( CBRNE), materials ( chemical, biological, radiological, nuclear and explosive ) has been identified as a key threat in national, regional, inter regional and international strategies. An Effective response to hazardous materials (CBRNE) risk and threat were realized to require a very high level of cooperation and coordination between various governments and their responsible organizations and authorities of regional and international partner. While improper policy of actions may easily be exploited by non- state members to (CBRNE) trafficking which may lead to develop weapon of mass destruction (WMD). Such strategy are of paramount important between all levels of the states and among regional agreements through comprehensive tailored assistance packages (e.g. export control, illicit trafficking of hazardous materials, redirection of scientist, emergency planning, crisis response safety and security culture. Capacity building, action plans and instruments for stability are necessary actions for efficient combating against illicit trafficking of hazardous materials. Regarding the needs of assessment phase, assistance must be based on data collection, analysis and prioritization of implanting the regulatory controls. Several activities have to be conducted to reduce CBRNE threat. The one- by- one approach, covering either nuclear and radioactive or chemical or biological materials has to be implanted on the country basis performance to mitigate CBRNE hazardous risk. On several consequent phases of intervention dealing with CBRNE risk mitigation the country has to establish a network of local, regional and international capabilities. Such network is setting up the mechanism for the country needs identifications, the guidelines for data collection, for data platform maintenance and update, the data assessment and the competent and operative organizations. This network will be to strengthen the long - term

Continuous improvement of the regulatory framework for the control of medical exposure

International Nuclear Information System (INIS)

Larcher, Ana M.; Ortiz Lopez, Pedro; Arias, Cesar; Marechal, Maria H.; Hernandez Alvarez, Ramon; Ferrer Garcia, Natividad; Castaneda Mucino, Antonia; Faller, Blanca

2008-01-01

One of the key elements to guide the improvement of the regulatory control is the availability of a self-assessment tool for regulatory performance. Although there is general guidance on self-assessment for regulators and users (IAEA), there is a need for more specific advice on how to address challenges and difficulties faced by regulatory bodies, when regulating radiation protection of patients. Examples of these challenges are the need for regulatory initiatives, in cooperation with health and education authorities, professional bodies and equipment suppliers, and to put in place necessary elements that are beyond responsibility of individual user of radiation, to enable them compliance with safety standards. Purpose: Within the programme of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, a project to develop such a self-assessment tool for the regulatory control of medical exposure has been designed. Method: National experiences in transposing and enforcing the international radiation safety standards, as to how the requirements are included in national regulations are reviewed. Further, difficulties to the implementation of safety requirements are analyzed and a self-assessment approach and possible regulatory solutions a are presented. Results and discussion: In this study the following documents are being produced: 1) transposition of international requirements into national regulations in the six countries of the Forum, 2) difficulties to implement and enforce the requirements, 3) guidance on self-assessment of regulatory framework for medical exposure, 4) suggested contribution to the revision of international radiation safety standards. (author)

7 CFR 1710.105 - State regulatory approvals.

Science.gov (United States)

2010-01-01

... and Basic Policies § 1710.105 State regulatory approvals. (a) In States where a borrower is required... loans are approved by RUS: (1) Loans requiring an Environmental Impact Statement; (2) Loans to finance...

Hydrogen mitigation systems - a Canadian regulatory perspective

International Nuclear Information System (INIS)

Khosla, J.K.; Rizk, M.

1997-01-01

This is a discussion paper to examine the regulatory requirements that may be necessary for the design, operation and maintenance of the hydrogen mitigation systems. These systems (if deemed necessary to maintain the containment function), may be considered to be a part of the containment systems. Therefore, these requirements are derived mostly from the AECB Regulatory Document R-7, which specifies the requirements for containment systems for CANDU nuclear power plants. Some additional requirements, which are specific to these systems have also been included. These requirements relate to a systematic examination of the hazards of hydrogen, the design basis for the mitigation systems, their functional and design requirements, analytical support to justify their selection, and operating and testing requirements. The requirements for severe accident have not yet been developed. It is, however, anticipated that the design of the hydrogen mitigation system would be such that future requirement can be accommodated. These requirements are intended for application to the new reactors in Canada. For the existing reactors, their application will be subjected to practicability. (author)

Regulatory Models and the Environment: Practice, Pitfalls, and Prospects

Energy Technology Data Exchange (ETDEWEB)

Holmes, K. John; Graham, Judith A.; McKone, Thomas; Whipple, Chris

2008-06-01

Computational models support environmental regulatory activities by providing the regulator an ability to evaluate available knowledge, assess alternative regulations, and provide a framework to assess compliance. But all models face inherent uncertainties, because human and natural systems are always more complex and heterogeneous than can be captured in a model. Here we provide a summary discussion of the activities, findings, and recommendations of the National Research Council's Committee on Regulatory Environmental Models, a committee funded by the US Environmental Protection Agency to provide guidance on the use of computational models in the regulatory process. Modeling is a difficult enterprise even outside of the potentially adversarial regulatory environment. The demands grow when the regulatory requirements for accountability, transparency, public accessibility, and technical rigor are added to the challenges. Moreover, models cannot be validated (declared true) but instead should be evaluated with regard to their suitability as tools to address a specific question. The committee concluded that these characteristics make evaluation of a regulatory model more complex than simply comparing measurement data with model results. Evaluation also must balance the need for a model to be accurate with the need for a model to be reproducible, transparent, and useful for the regulatory decision at hand. Meeting these needs requires model evaluation to be applied over the"life cycle" of a regulatory model with an approach that includes different forms of peer review, uncertainty analysis, and extrapolation methods than for non-regulatory models.

Regulatory facility guide for Ohio

Energy Technology Data Exchange (ETDEWEB)

Anderson, S.S.; Bock, R.E.; Francis, M.W.; Gove, R.M.; Johnson, P.E.; Kovac, F.M.; Mynatt, J.O. [Oak Ridge National Lab., TN (United States); Rymer, A.C. [Transportation Consulting Services, Knoxville, TN (United States)

1994-02-28

The Regulatory Facility Guide (RFG) has been developed for the DOE and contractor facilities located in the state of Ohio. It provides detailed compilations of international, federal, and state transportation-related regulations applicable to shipments originating at destined to Ohio facilities. This RFG was developed as an additional resource tool for use both by traffic managers who must ensure that transportation operations are in full compliance with all applicable regulatory requirements and by oversight personnel who must verify compliance activities.

Regulatory requirements related to risk-based inspection and maintenance

International Nuclear Information System (INIS)

Schroeder, H.C.; Kauer, R.

2003-01-01

By asking the question why new inspection and maintenance strategies have to be developed one can often be made aware that there is always a continue demand for cost reduction and optimisation. In this framework, general trends involving staff reduction, outsourcing, benchmarking etc. can often be observed nearly everywhere. Since inspection and maintenance are amongst the few cost factors, which could be actively influenced in the short term, and in combination with the recent regulatory fundamental changes (e.g. PED) yielding to considerably greater responsibilities for the operator of a plant, also the demand for documentation and comprehensibility of measures will increase. (orig.)

Current status of developmental neurotoxicity: regulatory view

DEFF Research Database (Denmark)

Hass, Ulla

2003-01-01

in the testing strategy for new and existing substances, and biocides. Hopefully, this will lead to an improved database for risk assessment of potential developmental neurotoxicants. However, the regulatory authorities and toxicologists will also be faced with the challenge that decisions have to be made......The need for developmental neurotoxicity testing has been recognized for decades and guidelines are available, as the USEPA guideline and the OECD draft TG 426. Regulatory testing of industrial chemicals for developmental neurotoxicity is required to some extent, especially for pesticides in the US....... Until recently, however, developmental neurotoxicity testing of industrial chemicals has not been a clear regulatory requirement in EU, probably due to the lack of an accepted OECD TG. The revised EU Technical Guidance Document for Risk Assessment (EU-TGD) has now included the OECD draft TG 426...

Comments on regulatory reform

Energy Technology Data Exchange (ETDEWEB)

Hendrie, J.M.

1982-01-01

Nuclear regulatory reform is divided into two parts. The first part contains all those matters for which new legislation is required. The second part concerns all those matters that are within the power of the Commission under existing statutes. Recommendations are presented.

Comments on regulatory reform

International Nuclear Information System (INIS)

Hendrie, J.M.

1982-01-01

Nuclear regulatory reform is divided into two parts. The first part contains all those matters for which new legislation is required. The second part concerns all those matters that are within the power of the Commission under existing statutes. Recommendations are presented

Design basis ground motion (Ss) required on new regulatory guide

International Nuclear Information System (INIS)

Kamae, Katsuhiro

2013-01-01

New regulatory guide is enforced on July 8. Here, it is introduced how the design basis ground motion (Ss) for seismic design of nuclear power reactor facilities was revised on the new guide. Ss is formulated as two types of earthquake ground motions, earthquake ground motions with site specific earthquake source and with no such specific source locations. The latter is going to be revised based on the recent observed near source ground motions. (author)

Perceptions of regulatory approaches

International Nuclear Information System (INIS)

Halin, Magnus; Leinonen, Ruusaliisa

2012-01-01

Ms. Ruusaliisa Leinonen and Mr. Magnus Halin from Fortum gave a joint presentation on industry perceptions of regulatory oversight of LMfS/SC. It was concluded that an open culture of discussion exists between the regulator (STUK) and the licensee, based on the common goal of nuclear safety. An example was provided of on how regulatory interventions helped foster improvements to individual and collective dose rate trends, which had remained static. Regulatory interventions included discussions on the ALARA concept to reinforce the requirement to continuously strive for improvements in safety performance. Safety culture has also been built into regulatory inspections in recent years. Training days have also been organised by the regulatory body to help develop a shared understanding of safety culture between licensee and regulatory personnel. Fortum has also developed their own training for managers and supervisors. Training and ongoing discussion on LMfS/SC safety culture is considered particularly important because both Fortum and the regulatory body are experiencing an influx of new staff due to the demographic profile of their organisations. It was noted that further work is needed to reach a common understanding of safety culture on a practical level (e.g., for a mechanic setting to work), and in relation to the inspection criteria used by the regulator. The challenges associated with companies with a mix of energy types were also discussed. This can make it more difficult to understand responsibilities and decision making processes, including the role of the parent body organisation. It also makes communication more challenging due to increased complexity and a larger number of stakeholders

Compliance. Regulatory policy P-211

International Nuclear Information System (INIS)

2001-05-01

This regulatory policy describes the basic principles and directives for establishing and conducting the Canadian Nuclear Safety Commission (CNSC) Compliance Program. The program is aimed at securing compliance by regulated persons with regulatory requirements made under the Nuclear Safety and Control Act ('the Act'). The policy applies to persons who are regulated by the CNSC through the Act, regulations and licences, as well as by decisions and orders made under the Act. The policy applies to officers and employees of the CNSC, and its authorized representatives or agents, who are involved in developing and carrying out compliance activities. Compliance, in the context of this policy, means conformity by regulated persons with the legally binding requirements of the Act, and the CNSC regulations, licences, decisions, and orders made under the Act. Compliance activities are CNSC measures of promotion, verification and enforcement aimed at securing compliance by regulated person with the applicable legally binding requirements. (author)

Situation of the medical physics in the Republic of Argentina. Regulatory problem linked to the requirement of physic specialists

International Nuclear Information System (INIS)

Arbor Gonzalez, A.; Larcher, A.; Blanco, S.

2001-01-01

This paper provides up-to-date data on the participation of medical physicists in current staffs for radiotherapy, nuclear medicine and diagnostic radiology in Argentina, and it presents projections on the academic education of specialists in the next five years. At the same time, the regulatory framework including the requirements for physicists staffing levels in medical practices is presented. This panorama permits to stick out the important role of the professional associations and the academic institutions in the development of Medical Physics in the country. (author)

Guidelines for IAEA International Regulatory Review Teams (IRRTs)

International Nuclear Information System (INIS)

2002-01-01

The IAEA International Regulatory Review Team (IRRT) programme provides advice and assistance to Member States to strengthen and enhance the effectiveness of the nuclear regulatory body whilst recognizing the ultimate responsibility of each Member State for nuclear safety. The IRRT programme, initiated in 1989, is not restricted to any particular group of Member States, whether developing or industrialized, but is available to all countries with nuclear installations in operation or approaching operation. The basic concepts, purposes and functions of a national regulatory body are well recognized in all Member States having a nuclear power programme. The IAEA Safety Standards Series publication entitled 'Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, Safety: Requirements', No. GS-R-1 (2000), provides a general consensus reference for the practices necessary for a national organization to fulfil the regulatory purposes and discharge the regulatory functions. The Requirements also defines the terms used in these guidelines. The guidance given in the Requirements recognizes that the organizational structure and regulatory processes will vary from country to country depending on their existing constitutional, legal and administrative systems; the size and structure of their nuclear programme; the technical skills and professional and financial resources available to their regulatory body, and social customs and cultural traditions. The objective of this report is to provide guidance on the basic structure of an IRRT mission and provide a common reference both across the various areas covered by an IRRT mission and across all the missions in the programme. As such, it is addressed, principally, to the team members of IRRT missions but it also provides guidance to a host regulatory body receiving a mission. This report identifies the objectives of the IRRT mission and sets out the scope of the topic areas that are

Continuous Improvement of the Regulatory Framework for the Control of Medical Exposure

International Nuclear Information System (INIS)

Larcher, A.M.; Ortiz lopez, Pedro; Arias, Cesar; Marechal, Maria H.; Hernandez Alvarez, Ramon; Ferrer Garcia, Natividad; Castaneda Mucino, Antonia; Faller, Blanca

2011-01-01

Background: One of the key elements to guide the improvement of the regulatory control is the availability of a self-assessment tool for regulatory performance. Although there is general guidance on self-assessment for regulators and users (IAEA), there is a need for specific advice on how to address challenges and difficulties faced by regulatory bodies, when regulating radiation protection of patients. Examples of these challenges are the need of regulatory initiatives, in cooperation with health and education authorities, professional bodies and equipment suppliers, and to put in place necessary elements that are beyond responsibility of individual users of radiation, to enable them compliance with safety standards. Purpose: within the programme of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, a project to develop such a self assessment tool for the regulatory control of medical exposure has been designed. Method: national experiences in transposing and enforcing the international radiation safety standards, as to how the requirements are included in national regulations are reviewed. Further, difficulties to the implementation of safety requirements are included in national regulations are analyzed and a self assessment approach and possible regulatory solutions are presented. Results and discussion: in tis study the following documents are being produced: 1) Transposition of international requirements into national regulations in the six countries of the Forum, 2) difficulties to implement and enforce the requirements, 3) guidance on self assessment of regulatory framework for medical exposure, 4) suggested contribution to the revision of international radiation safety standards. (authors)

Regulatory requirements on accident management and emergency preparedness - concept of nuclear and radiation safety during beyond-design-basis accidents

International Nuclear Information System (INIS)

Yanke, R.

2002-01-01

Actual practice the and proposals for further activities in the field of Accident Management (AM) in the member countries of the Co-operation Forum of WWER regulators and in Western countries have been assessed. Further the results of the last working group on AM , the overview of interactions of severe accident research and the regulatory positions in various countries, IAEA reports, practice in Switzerland and Finland, were taken into consideration. From this information, the working group derived recommendations on Accident Management. The general proposals correspond to the present state of the art on AM. They do not describe the whole spectra of recommendations on AM for NPPs with WWER reactors. A basis for the implementation of an AM program is given, which could be extended in a follow-up working group. The developments and research concerning AM have to be continued. The positions of various countries with regard to the 'Interactions of severe accident research and the regulatory positions' are given. On the basis of the working group proposals, the WWER regulators could set regulatory requirements and support further developments of AM strategies, making use of the benefits of common features of NPPs with WWER reactors. Concerted actions in the field of AM between the WWER regulators would bundle the development of a unified concept of recommendations and speed up the implementation of AM measures in order to minimise the risks involved in nuclear power generation

Regulatory requirements and administrative practice in safety of nuclear installations

International Nuclear Information System (INIS)

Servant, J.

1977-01-01

This paper reviews the current situation of the France regulatory rules and procedures dealing with the safety of the main nuclear facilities and, more broadly, the nuclear security. First, the author outlines the policy of the French administration which requires that the licensee responsible for an installation has to demonstrate that all possible measures are taken to ensure a sufficient level of safety, from the early stage of the project to the end of the operation of the plant. Thus, the administration performs the assessment on a case-by-case basis, of the safety of each installation before granting a nuclear license. On the other hand, the administration settles overall safety requirements for specific categories of installations or components, which determine the ultimate safety performances, but avoid, as far as possible, to detail the technical specifications to be applied in order to comply with these goals. This approach, which allows the designers and the licensees to rely upon sound codes and standards, gains the advantage of a great flexibility without imparing the nuclear safety. The author outlines the licensing progress for the main categories of installations: nuclear power plants of the PWR type, fast breeders, uranium isotope separation plants, and irradiated fuel processing plants. Emphasis is placed on the most noteworthy points: standardization of projects, specific risks of each site, problems of advanced type reactors, etc... The development of the technical regulations is presented with emphasis on the importance of an internationally concerned action within the nuclear international community. The second part of this paper describes the France operating experience of nuclear installations from the safety point of view. Especially, the author examines the technical and administrative utilization of data from safety significant incidents in reactors and plants, and the results of the control performed by the nuclear installations

Current status of herbal product: Regulatory overview

Science.gov (United States)

Sharma, Sanjay

2015-01-01

A review of the regulatory status of herbal drugs/products was done for few countries forming part of Asia, Africa, America, Europe, and Australia, to understand various categories under which the trade of herbal products is permitted and their premarketing requirements. A critical assessment was done, to know the hindrances in the process of harmonization of herbal products. It has been found that there is a lack of harmonization in the regulatory requirements of herbal products internationally, besides the issues of availability of herbs and their conservation. These are hindering the international trade and growth of the herbal products segment. PMID:26681886

Canadian uranium mines and mills evolution of regulatory expectations and requirements for effluent treatment

International Nuclear Information System (INIS)

LeClair, J.; Ashley, F.

2006-01-01

The regulation of uranium mining in Canada has changed over time as our understanding and concern for impacts on both human and non-human biota has evolved. Since the mid-1970s and early 1980s, new uranium mine and mill developments have been the subject of environmental assessments to assess and determine the significance of environmental effects throughout the project life cycle including the post-decommissioning phase. Water treatment systems have subsequently been improved to limit potential effects by reducing the concentration of radiological and non-radiological contaminants in the effluent discharge and the total loadings to the environment. This paper examines current regulatory requirements and expectations and how these impact uranium mining/milling practices. It also reviews current water management and effluent treatment practices and performance. Finally, it examines the issues and challenges for existing effluent treatment systems and identifies factors to be considered in optimizing current facilities and future facility designs. (author)

Common definition for categories of clinical research: a prerequisite for a survey on regulatory requirements by the European Clinical Research Infrastructures Network (ECRIN)

LENUS (Irish Health Repository)

Kubiak, Christine

2009-10-16

Abstract Background Thorough knowledge of the regulatory requirements is a challenging prerequisite for conducting multinational clinical studies in Europe given their complexity and heterogeneity in regulation and perception across the EU member states. Methods In order to summarise the current situation in relation to the wide spectrum of clinical research, the European Clinical Research Infrastructures Network (ECRIN) developed a multinational survey in ten European countries. However a lack of common classification framework for major categories of clinical research was identified, and therefore reaching an agreement on a common classification was the initial step in the development of the survey. Results The ECRIN transnational working group on regulation, composed of experts in the field of clinical research from ten European countries, defined seven major categories of clinical research that seem relevant from both the regulatory and the scientific points of view, and correspond to congruent definitions in all countries: clinical trials on medicinal products; clinical trials on medical devices; other therapeutic trials (including surgery trials, transplantation trials, transfusion trials, trials with cell therapy, etc.); diagnostic studies; clinical research on nutrition; other interventional clinical research (including trials in complementary and alternative medicine, trials with collection of blood or tissue samples, physiology studies, etc.); and epidemiology studies. Our classification was essential to develop a survey focused on protocol submission to ethics committees and competent authorities, procedures for amendments, requirements for sponsor and insurance, and adverse event reporting following five main phases: drafting, consensus, data collection, validation, and finalising. Conclusion The list of clinical research categories as used for the survey could serve as a contribution to the, much needed, task of harmonisation and simplification of the

Common definition for categories of clinical research: a prerequisite for a survey on regulatory requirements by the European Clinical Research Infrastructures Network (ECRIN

Directory of Open Access Journals (Sweden)

Sanz Nuria

2009-10-01

Full Text Available Abstract Background Thorough knowledge of the regulatory requirements is a challenging prerequisite for conducting multinational clinical studies in Europe given their complexity and heterogeneity in regulation and perception across the EU member states. Methods In order to summarise the current situation in relation to the wide spectrum of clinical research, the European Clinical Research Infrastructures Network (ECRIN developed a multinational survey in ten European countries. However a lack of common classification framework for major categories of clinical research was identified, and therefore reaching an agreement on a common classification was the initial step in the development of the survey. Results The ECRIN transnational working group on regulation, composed of experts in the field of clinical research from ten European countries, defined seven major categories of clinical research that seem relevant from both the regulatory and the scientific points of view, and correspond to congruent definitions in all countries: clinical trials on medicinal products; clinical trials on medical devices; other therapeutic trials (including surgery trials, transplantation trials, transfusion trials, trials with cell therapy, etc.; diagnostic studies; clinical research on nutrition; other interventional clinical research (including trials in complementary and alternative medicine, trials with collection of blood or tissue samples, physiology studies, etc.; and epidemiology studies. Our classification was essential to develop a survey focused on protocol submission to ethics committees and competent authorities, procedures for amendments, requirements for sponsor and insurance, and adverse event reporting following five main phases: drafting, consensus, data collection, validation, and finalising. Conclusion The list of clinical research categories as used for the survey could serve as a contribution to the, much needed, task of harmonisation and

17 CFR 201.420 - Appeal of determinations by self-regulatory organizations.

Science.gov (United States)

2010-04-01

... self-regulatory organizations. 201.420 Section 201.420 Commodity and Securities Exchanges SECURITIES... Review § 201.420 Appeal of determinations by self-regulatory organizations. (a) Application for review... by a self-regulatory organization determination as to which a notice is required to be filed with the...

47 CFR 1.1159 - Filing locations and receipts for regulatory fees.

Science.gov (United States)

2010-10-01

... fees. 1.1159 Section 1.1159 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND... for regulatory fees. (a) Regulatory fee payments must be directed to the location and address set forth in §§ 1.1152 through 1.1156 for the specific category of fee involved. Any regulatory fee required...

Regulatory Risk Management of Advanced Nuclear Power Plants

International Nuclear Information System (INIS)

George, Glenn R.

2002-01-01

Regulatory risk reflects both the likelihood of adverse outcomes during regulatory interactions and the severity of those outcomes. In the arena of advanced nuclear power plant licensing and construction, such adverse outcomes may include, for example, required design changes and construction delays. These, in turn, could significantly affect the economics of the plant and the generation portfolio in which it will operate. In this paper, the author addresses these issues through the lens of risk management. The paper considers various tools and techniques of regulatory risk management, including design diversity and hedging strategies. The effectiveness of alternate approaches is weighed and recommendations are made in several regulatory contexts. (author)

Cost-benefit considerations in regulatory decision-making

International Nuclear Information System (INIS)

Harvie, J.D.

1996-01-01

The Atomic Energy Control Board is investigating the feasibility of developing methods for factoring cost-benefit considerations into its regulatory decision-making. This initiative results, in part, from the federal government policy requiring cost-benefit considerations to be taken into account in regulatory processes, and from the recommendations of an Advisory Panel on Regulatory Review in 1993, submitted to the Minister of Natural Resources Canada. One of these recommendations stated: 'that mechanisms be developed to examine cost-benefit issues and work towards some consensus of opinion among stakeholders; a task force on the subject could be an appropriate starting point'. (author)

Impact of regulatory science on global public health

Directory of Open Access Journals (Sweden)

Meghal Patel

2012-07-01

Full Text Available Regulatory science plays a vital role in protecting and promoting global public health by providing the scientific basis for ensuring that food and medical products are safe, properly labeled, and effective. Regulatory science research was first developed for the determination of product safety in the early part of the 20th Century, and continues to support innovation of the processes needed for regulatory policy decisions. Historically, public health laws and regulations were enacted following public health tragedies, and often the research tools and techniques required to execute these laws lagged behind the public health needs. Throughout history, similar public health problems relating to food and pharmaceutical products have occurred in countries around the world, and have usually led to the development of equivalent solutions. For example, most countries require a demonstration of pharmaceutical safety and efficacy prior to marketing these products using approaches that are similar to those initiated in the United States. The globalization of food and medical products has created a shift in regulatory compliance such that gaps in food and medical product safety can generate international problems. Improvements in regulatory research can advance the regulatory paradigm toward a more preventative, proactive framework. These improvements will advance at a greater pace with international collaboration by providing additional resources and new perspectives for approaching and anticipating public health problems. The following is a review of how past public health disasters have shaped the current regulatory landscape, and where innovation can facilitate the shift from reactive policies to proactive policies.

Impact of regulatory science on global public health.

Science.gov (United States)

Patel, Meghal; Miller, Margaret Ann

2012-07-01

Regulatory science plays a vital role in protecting and promoting global public health by providing the scientific basis for ensuring that food and medical products are safe, properly labeled, and effective. Regulatory science research was first developed for the determination of product safety in the early part of the 20th Century, and continues to support innovation of the processes needed for regulatory policy decisions. Historically, public health laws and regulations were enacted following public health tragedies, and often the research tools and techniques required to execute these laws lagged behind the public health needs. Throughout history, similar public health problems relating to food and pharmaceutical products have occurred in countries around the world, and have usually led to the development of equivalent solutions. For example, most countries require a demonstration of pharmaceutical safety and efficacy prior to marketing these products using approaches that are similar to those initiated in the United States. The globalization of food and medical products has created a shift in regulatory compliance such that gaps in food and medical product safety can generate international problems. Improvements in regulatory research can advance the regulatory paradigm toward a more preventative, proactive framework. These improvements will advance at a greater pace with international collaboration by providing additional resources and new perspectives for approaching and anticipating public health problems. The following is a review of how past public health disasters have shaped the current regulatory landscape, and where innovation can facilitate the shift from reactive policies to proactive policies. Copyright © 2012. Published by Elsevier B.V.

ATMPs for Cancer Immunotherapy: A Regulatory Overview.

Science.gov (United States)

Galli, Maria Cristina

2016-01-01

This chapter discusses European regulatory requirements for development of advanced therapy medicinal products (ATMP) for cancer immunotherapy approaches, describing the framework for clinical trials and for marketing authorization.Regulatory critical issues and challenges for developing ATMP are also discussed, with focus on potency determination, long-term follow-up, comparability, and insertional mutagenesis issues. Some of the most critical features of GMP application to ATMP are also described.

Licensing and regulatory control of nuclear power plants in Canada

International Nuclear Information System (INIS)

Atchison, R.J.

1975-01-01

The paper discusses the safety philosophy adopted in Canada, the safety criteria and regulatory requirements necessary for the application of this philosophy to reactor design and operation, and finally the means by which compliance with Board requirements is effected. It is emphasized that the effectiveness of regulatory control depends not only on the underlying philosophy but also on the detailed way in which it is applied. (orig./HP) [de

Regulatory issues of digital instrumentation and control system in Lungmen project

International Nuclear Information System (INIS)

Chuang, C.F.; Chou, H.P.

2004-01-01

The Lungmen Nuclear Power Station (LNPS) is currently under construction in Taiwan, which consists of 2 advanced boiling water reactor (ABWR) units. The instrumentation and control (IC) systems of the LNPS are based on the state-of-the-art modernized fully integrated digital design. These IC systems possess many advantages and distinguished features comparing to traditional analog IC systems, they enjoy set-point stability, self-diagnostic and automatic testing ability, fault tolerance and avoidance, low power requirements, data handling and storage capability, as well as enhanced human-machine interfaces. This paper presents regulatory overviews, regulatory requirements, current major regulatory issues, as well as the areas of regulatory concerns and the lessons learned on the digital IC systems in the Lungmen Project

Regulatory pathways for vaccines for developing countries.

Science.gov (United States)

Milstien, Julie; Belgharbi, Lahouari

2004-01-01

Vaccines that are designed for use only in developing countries face regulatory hurdles that may restrict their use. There are two primary reasons for this: most regulatory authorities are set up to address regulation of products for use only within their jurisdictions and regulatory authorities in developing countries traditionally have been considered weak. Some options for regulatory pathways for such products have been identified: licensing in the country of manufacture, file review by the European Medicines Evaluation Agency on behalf of WHO, export to a country with a competent national regulatory authority (NRA) that could handle all regulatory functions for the developing country market, shared manufacturing and licensing in a developing country with competent manufacturing and regulatory capacity, and use of a contracted independent entity for global regulatory approval. These options have been evaluated on the basis of five criteria: assurance of all regulatory functions for the life of the product, appropriateness of epidemiological assessment, applicability to products no longer used in the domestic market of the manufacturing country, reduction of regulatory risk for the manufacturer, and existing rules and regulations for implementation. No one option satisfies all criteria. For all options, national infrastructures (including the underlying regulatory legislative framework, particularly to formulate and implement local evidence-based vaccine policy) must be developed. WHO has led work to develop this capacity with some success. The paper outlines additional areas of action required by the international community to assure development and use of vaccines needed for the developing world. PMID:15042235

Regulatory and licensee surveys

International Nuclear Information System (INIS)

2009-01-01

Prior to the workshop two CSNI/WGHOF surveys were distributed. One survey was directed at regulatory bodies and the other was directed at plant licensees. The surveys were: 1 - Regulatory Expectations of Licensees' Arrangements to Ensure Suitable Organisational Structure, Resources and Competencies to Manage Safety (sent to WGHOF regulatory members). The survey requested that the respondents provide a brief overview of the situation related to plant organisations in their country, their regulatory expectations and their formal requirements. The survey addressed three subjects: the demonstration and documentation of organisational structures, resources and competencies, organisational changes, issues for improvement (for both current and new plants). Responses were received from eleven regulatory bodies. 2 - Approaches to Justify Organisational Suitability (sent to selected licensees). The purpose of the survey to was to gain an understanding of how licensees ensure organisational suitability, resources and competencies. This information was used to assist in the development of the issues and subjects that were addressed at the group discussion sessions. Responses were received from over fifteen licensees from nine countries. The survey requested that the licensees provide information on how they ensure effective organisational structures at their plants. The survey grouped the questions into the following four categories: organisational safety functions, resource and competence, decision-making and communication, good examples and improvement needs. The findings from these surveys were used in conjunction with other factors to identify the key issues for the workshop discussion sessions. The responses from these two surveys are discussed briefly in Sections 4 and 5 of this report. More extensive reviews of the regulatory and licensee responses are provided in Appendix 1

Systematic Assessment of Regulatory Competences (SARCON) V18a

International Nuclear Information System (INIS)

Zimmermann, Moritz

2014-01-01

Why Competence Management? • Arrangements for competence management is a key factor to: • Support the implementation of article 8 of CNS (Convention on Nuclear Safety – “regulatory body with adequate competence and human resources”); • Support the implementation of Modules 3 and 4 of the IRRS and other IAEA Safety Standards (Module 3: “Responsibilities and functions of the regulatory body”, Module 4: “Management system of the regulatory body”); • Identify gaps between regulatory required competences and the existing resources; • Develop and implement tools and programmes to fill the gaps; • Review periodically the competence needs and training programmes

As to achieve regulatory action, regulatory approaches

International Nuclear Information System (INIS)

Cid, R.; Encinas, D.

2014-01-01

The achievement of the effectiveness in the performance of a nuclear regulatory body has been a permanent challenge in the recent history of nuclear regulation. In the post-Fukushima era this challenge is even more important. This article addresses the subject from two complementary points of view: the characteristics of an effective regulatory body and the regulatory approaches. This work is based on the most recent studies carried out by the Committee on Nuclear Regulatory Activities, CNRA (OECD/NEA), as well as on the experience of the Consejo de Seguridad Nuclear, CSN, the Spanish regulatory body. Rafael Cid is the representative of CSN in these project: Diego Encinas has participated in the study on regulatory approaches. (Author)

US Department of Energy Mixed Waste Integrated Program performance systems analysis

International Nuclear Information System (INIS)

Ferrada, J.J.; Berry, J.B.

1994-01-01

The primary goal of this project is to support decision making for the U.S. Department of Energy (DOE)/EM-50 Mixed Waste Integrated Program (MWIP) and the Mixed Low-Level Waste Program. A systems approach to the assessment of enhanced waste form(s) production will be employed including, coordination and configuration management of activities in specific technology development tasks. The purpose of this paper is to describe the development and application of a methodology for implementing a performance systems analysis on mixed waste treatment process technologies. The second section describes a conventional approach to process systems analysis followed by a methodology to estimate uncertainties when analyzing innovative technologies. Principles from these methodologies have been used to develop a performance systems analysis for MWIP. The third section describes the systems analysis tools. The fourth section explains how the performance systems analysis will be used to analyze MWIP process alternatives. The fifth and sixth sections summarize this paper and describe future work for this project. Baseline treatment process technologies (i.e., commercially available technologies) and waste management strategies are evaluated systematically using the ASPEN PLUS program applications developed by the DOE Mixed Waste Treatment Project (MWTP). Alternatives to the baseline (i.e., technologies developed by DOE's Office of Technology Development) are analyzed using FLOW, a user-friendly program developed at Oak Ridge National Laboratory (ORNL). Currently, this program is capable of calculating rough order-of-magnitude mass and energy balances to assess the performance of the alternative technologies as compared to the baseline process. In the future, FLOW will be capable of communicating information to the ASPEN PLUS program

ENSI’s regulatory framework strategy; Regelwerksstrategie des ENSI -- Stratégie réglementaire de l’IFSN -- ENSI’s regulatory framework strategy

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-03-15

This short brochure issued by the Swiss Federal Nuclear Safety Inspectorate ENSI defines the organisation’s regulatory framework strategy. Six guiding principles are declared and discussed: Comprehensive harmonisation with relevant international requirements, basing the regulatory framework on existing, tried-and-tested regulations, issuing of its own guidelines only when it is necessary to do so, guidelines to be drawn up transparently and with the involvement of all stakeholders and basing the level of detail of its regulatory framework on hazard potential and risk.

Safeguards inventory and process monitoring regulatory comparison

Energy Technology Data Exchange (ETDEWEB)

Cavaluzzi, Jack M. [Texas A & M Univ., College Station, TX (United States); Gibbs, Philip W. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2013-06-27

Detecting the theft or diversion of the relatively small amount of fissile material needed to make a nuclear weapon given the normal operating capacity of many of today’s running nuclear production facilities is a difficult task. As throughput increases, the ability of the Material Control and Accountability (MC&A) Program to detect the material loss decreases because the statistical measurement uncertainty also increases. The challenge faced is the ability of current accounting, measurement, and material control programs to detect small yet significant losses under some regulatory approaches can decrease to the point where it is extremely low if not practically non-existent at normal operating capacities. Adding concern to this topic is that there are variations among regulatory bodies as far as what is considered a Significant Quantity (SQ). Some research suggests that thresholds should be lower than those found in any current regulation which if adopted would make meeting detection goals even more difficult. This paper reviews and compares the current regulatory requirements for the MA elements related to physical inventory, uncertainty of the Inventory Difference (ID), and Process Monitoring (PM) in the United States Department of Energy (DOE) and Nuclear Regulatory Commission (NRC), Rosatom of the Russian Federation and the Chinese Atomic Energy Agency (CAEA) of China. The comparison looks at how the regulatory requirements for the implementation of various MA elements perform across a range of operating capacities in example facilities.

Regulatory Control of Radiation Sources. Safety Guide (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

Semaphorin 4C Protects against Allergic Inflammation: Requirement of Regulatory CD138+ Plasma Cells.

Science.gov (United States)

Xue, Di; Kaufman, Gabriel N; Dembele, Marieme; Beland, Marianne; Massoud, Amir H; Mindt, Barbara C; Fiter, Ryan; Fixman, Elizabeth D; Martin, James G; Friedel, Roland H; Divangahi, Maziar; Fritz, Jörg H; Mazer, Bruce D

2017-01-01

The regulatory properties of B cells have been studied in autoimmune diseases; however, their role in allergic diseases is poorly understood. We demonstrate that Semaphorin 4C (Sema4C), an axonal guidance molecule, plays a crucial role in B cell regulatory function. Mice deficient in Sema4C exhibited increased airway inflammation after allergen exposure, with massive eosinophilic lung infiltrates and increased Th2 cytokines. This phenotype was reproduced by mixed bone marrow chimeric mice with Sema4C deficient only in B cells, indicating that B lymphocytes were the key cells affected by the absence of Sema4C expression in allergic inflammation. We determined that Sema4C-deficient CD19 + CD138 + cells exhibited decreased IL-10 and increased IL-4 expression in vivo and in vitro. Adoptive transfer of Sema4c -/- CD19 + CD138 + cells induced marked pulmonary inflammation, eosinophilia, and increased bronchoalveolar lavage fluid IL-4 and IL-5, whereas adoptive transfer of wild-type CD19 + CD138 + IL-10 + cells dramatically decreased allergic airway inflammation in wild-type and Sema4c -/- mice. This study identifies a novel pathway by which Th2-mediated immune responses are regulated. It highlights the importance of plasma cells as regulatory cells in allergic inflammation and suggests that CD138 + B cells contribute to cytokine balance and are important for maintenance of immune homeostasis in allergic airways disease. Furthermore, we demonstrate that Sema4C is critical for optimal regulatory cytokine production in CD138 + B cells. Copyright © 2016 by The American Association of Immunologists, Inc.

Measuring and Modeling the U.S. Regulatory Ecosystem

Science.gov (United States)

Bommarito, Michael J., II; Katz, Daniel Martin

2017-09-01

Over the last 23 years, the U.S. Securities and Exchange Commission has required over 34,000 companies to file over 165,000 annual reports. These reports, the so-called "Form 10-Ks," contain a characterization of a company's financial performance and its risks, including the regulatory environment in which a company operates. In this paper, we analyze over 4.5 million references to U.S. Federal Acts and Agencies contained within these reports to measure the regulatory ecosystem, in which companies are organisms inhabiting a regulatory environment. While individuals across the political, economic, and academic world frequently refer to trends in this regulatory ecosystem, far less attention has been paid to supporting such claims with large-scale, longitudinal data. In this paper, in addition to positing a model of regulatory ecosystems, we document an increase in the regulatory energy per filing, i.e., a warming "temperature." We also find that the diversity of the regulatory ecosystem has been increasing over the past two decades. These findings support the claim that regulatory activity and complexity are increasing, and this framework contributes an important step towards improving academic and policy discussions around legal complexity and regulation.

Glycoconjugate Vaccines: The Regulatory Framework.

Science.gov (United States)

Jones, Christopher

2015-01-01

Most vaccines, including the currently available glycoconjugate vaccines, are administered to healthy infants, to prevent future disease. The safety of a prospective vaccine is a key prerequisite for approval. Undesired side effects would not only have the potential to damage the individual infant but also lead to a loss of confidence in the respective vaccine-or vaccines in general-on a population level. Thus, regulatory requirements, particularly with regard to safety, are extremely rigorous. This chapter highlights regulatory aspects on carbohydrate-based vaccines with an emphasis on analytical approaches to ensure the consistent quality of successive manufacturing lots.

Regulatory control of nuclear power plants

International Nuclear Information System (INIS)

2002-01-01

consultants meeting at the end of 2001 by adding updates on the Nuclear Safety Convention and US regulatory practices. The main purpose of the book is to provide written background material to the participants and to support lecturers of the training courses on Regulatory Control of Nuclear Power Plants. The idea is to present general practices recommended by the IAEA in its safety guidance as well as country specific examples of how these general principles and requirements have been implemented in various countries. The examples selected are representative, showing existing and functional practices, and also provide a good selection of different practices adopted by different regulatory organizations. They reflect practices in large and small countries and regulatory bodies. They do not follow any particular regulatory practice but try to offer several alternatives to be useful for many inspectors coming from different types of organizations. The textbook has been compiled from the presentations provided during the training courses on Regulatory Control of Nuclear Power Plants from 1997 to 2001

Improving regulatory oversight of maintenance programs

International Nuclear Information System (INIS)

Cook, S.

2008-01-01

Safe nuclear power plant operation requires that risks due to failure or unavailability of Structures, Systems and Components (SSCs) be minimized. Implementation of an effective maintenance program is a key means for achieving this goal. In its regulatory framework, the important relationship between maintenance and safety is acknowledged by the CNSC. A high level maintenance program requirement is included in the Class I Facilities Regulations. In addition, the operating licence contains a condition based on the principle that the design function and performance of SSCs needs to remain consistent with the plant's design and analysis documents. Nuclear power plant licensees have the primary responsibility for safe operation of their facilities and consequently for implementation of a successful maintenance program. The oversight role of the Canadian Nuclear Safety Commission (CNSC) is to ensure that the licensee carries out that responsibility. The challenge for the CNSC is how to do this consistently and efficiently. Three opportunities for improvement to regulatory maintenance oversight are being pursued. These are related to the regulatory framework, compliance verification inspection activities and monitoring of self-reporting. The regulatory framework has been improved by clarifying expectations through the issuance of S-210 'Maintenance Programs for Nuclear Power Plants'. Inspection activities have been improved by introducing new maintenance inspections into the baseline program. Monitoring is being improved by making better use of self-reported and industry produced maintenance related performance indicators. As with any type of program change, the challenge is to ensure the consistent and optimal application of regulatory activities and resources. This paper is a summary of the CNSC's approach to improving its maintenance oversight strategy. (author)

75 FR 54921 - Withdrawal of Regulatory Guides 1.38, 1.94, and 1.116

Science.gov (United States)

2010-09-09

... Guide 1.38, ``Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling....116, ``Quality Assurance Requirements for Installation, Inspection, and Testing of Mechanical... Development Branch, Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory...

Regulatory and Non-regulatory Responses to Hydraulic Fracturing in Local Communities

Science.gov (United States)

Phartiyal, P.

2015-12-01

The practice of extracting oil and gas from tight rock formations using advances in technology, such as hydraulic fracturing and directional drilling, has expanded exponentially in states and localities across the country. As the scientific data collection and analysis catches up on the many potential impacts of this unconventional oil and gas development, communities are turning to their local officials to make decisions on whether and how fracking should proceed. While most regulatory authority on the issue rests with the state agencies, local officials have experimented with a wide range of regulatory, non-regulatory, and fiscal tools to manage the impacts of fracking. These impacts can occur on the local air, water, seismicity, soil, roads, schools, and affect residents, on-site workers, emergency and social services. Local officials' approaches are often influenced by their prior experience with minerals extraction in their localities. The speaker will present examples of the kinds of information sources, tools and approaches communities across the country are using, from noise barriers to setback requirements to information sharing in order to be able to balance the promise and perils of oil and gas development in their jurisdictions.

Enabling legislation and regulatory determinations for a nuclear power programme

International Nuclear Information System (INIS)

Ha-Vinh, Phuong

1975-01-01

Broad definition of the scope of enabling legislation, identification of branches of laws involved in the licensing and regulatory control, overview of some typical licensing practices and provisions, some specific legislative or regulatory requirements including financial security to over nuclear liability. (HP) [de

Strengthening Regulatory Competence in Pakistan

International Nuclear Information System (INIS)

Sadiq, M.

2016-01-01

Capacity building of Pakistan Nuclear Regulatory Authority is considered an essential element in pursuit of its vision to become a world class regulatory body. Since its inception in 2001, PNRA has continuously endeavoured to invest in its people, develop training infrastructure and impart sound knowledge and professional skills with the aim to improve its regulatory effectiveness. The use of nuclear and radioactive material in Pakistan has increased manifold in recent years, thus induction of more manpower was needed for regulatory oversight. PNRA adopted two pronged approach for meeting the manpower demand (a) employment of university graduates through fast track recruitment drive and (b) induction of graduates by offering fellowships for Master degree programs. Although, the newly employed staff was selected on the basis of their excellent academic qualifications in basic and applied sciences, but they required rigorous knowledge and skills in regulatory perspectives. In order to implement a structured training program, PNRA conducted Training Needs Assessment (TNA) and identified competency gaps of the regulatory staff in legal, technical, regulatory practice and behavioural domains. PNRA took several initiatives for capacity building which included establishment of a training centre for sustainability of trainings, initiation of a fellowship scheme for Master program, attachment of staff at local institutes for on-the-job training and placement at foreign regulatory bodies and organizations for technical development with the assistance of IAEA. The above strategies have been very beneficial in competence building of the PNRA staff to perform all regulatory activities indigenously for nuclear power plants, research reactors and radiation facilities. Provision of vibrant technical support to IAEA and Member States in various programs by PNRA is a landmark of these competence development efforts. This paper summarizes PNRA initiatives and the International Atomic

A guide to ventilation requirements for uranium mines and mills. Regulatory guide G-221

International Nuclear Information System (INIS)

2003-06-01

The purpose of G-221 is to help persons address the requirements for the submission of ventilation-related information when applying for a Canadian Nuclear Safety Commission (CNSC) licence to site and construct, operate or decommission a uranium mine or mill. This guide is also intended to help applicants for a uranium mine or mill licence understand their operational and maintenance obligations with respect to ventilation systems, and to help CNSC staff evaluate the adequacy of applications for uranium mine and mill licences. This guide is relevant to any application for a CNSC licence to prepare a site for and construct, operate or decommission a uranium mine or mill. In addition to summarizing the ventilation-related obligations or uranium mine and mill licensee, the guide describes and discusses the ventilation-related information that licence applicants should typically submit to meet regulatory requirements. The guide pertains to any ventilation of uranium mines and mills for the purpose of assuring the radiation safety of workers and on-site personnel. This ventilation may be associated with any underground or surface area or premise that is licensable by the CNSC as part of a uranium mine or mill. These areas and premises typically include mine workings, mill buildings, and other areas or premises involving or potentially affected by radiation or radioactive materials. Some examples of the latter include offices, effluent treatment plants, cafeterias, lunch rooms and personnel change-rooms. (author)

Reliability programs for nuclear power plants. Regulatory standard S-98 revision 1

International Nuclear Information System (INIS)

2005-07-01

The purpose of this regulatory standard is to help assure, in accordance with the purpose of the Nuclear Safety and Control Act (NSCA), that a licensee who constructs or operates a nuclear power plant (NPP) develops and implements a reliability program that assures that the systems important to safety at the plant can and will meet their defined design and performance specifications at acceptable levels of reliability throughout the lifetime of the facility. This regulatory standard describes the requirements of a reliability program for a nuclear power plant. The licensee shall implement the requirements described in this regulatory standard when a condition of a licence or other legally enforceable instrument so requires.(author)

Regulatory viewpoint on nuclear fuel quality assurance

International Nuclear Information System (INIS)

Tripp, L.E.

1976-01-01

Considerations of the importance of fuel quality and performance to nuclear safety, ''as low reasonably achievable'' release of radioactive materials in reactor effluents, and past fuel performance problems demonstrate the need for strong regulatory input, review and inspection of nuclear fuel quality assurance programs at all levels. Such a regulatory program is being applied in the United States of America by the US Nuclear Regulatory Commission. Quality assurance requirements are contained within government regulations. Guidance on acceptable methods of implementing portions of the quality assurance program is contained within Regulatory Guides and other NRC documents. Fuel supplier quality assurance program descriptions are reviewed as a part of the reactor licensing process. Inspections of reactor licensee control of their fuel vendors as well as direct inspections of fuel vendor quality assurance programs are conducted on a regularly scheduled basis. (author)

Regulatory practices of radiation safety of SNF transportation in Russia

International Nuclear Information System (INIS)

Kuryndina, Lidia; Kuryndin, Anton; Stroganov, Anatoly

2008-01-01

This paper overviews current regulatory practices for the assurance of nuclear and radiation safety during railway transportation of SNF on the territory of Russian Federation from NPPs to longterm-storage of reprocessing sites. The legal and regulatory requirements (mostly compliant with IAEA ST-1), licensing procedure for NM transportation are discussed. The current procedure does not require a regulatory approval for each particular shipment if the SNF fully comply with the Rosatom's branch standard and is transported in approved casks. It has been demonstrated that SNF packages compliant with the branch standard, which is knowingly provide sufficient safety margin, will conform to the federal level regulations. The regulatory approval is required if a particular shipment does not comply with the branch standard. In this case, the shipment can be approved only after regulatory review of Applicant's documents to demonstrate that the shipment still conformant to the higher level (federal) regulations. The regulatory review frequently needs a full calculation test of the radiation safety assurance. This test can take a lot of time. That's why the special calculation tools were created in SEC NRS. These tools aimed for precision calculation of the radiation safety parameters by SNF transportation use preliminary calculated Green's functions. Such approach allows quickly simulate any source distribution and optimize spent fuel assemblies placement in cask due to the transport equation property of linearity relatively the source. The short description of calculation tools are presented. Also, the paper discusses foreseen implications related to transportation of mixed-oxide SNF. (author)

76 FR 78059 - Self-Regulatory Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change...

Science.gov (United States)

2011-12-15

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-65927; File No. SR-OCC-2011-15] Self-Regulatory Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change Relating to Management of..., future regulatory requirements for clearinghouses could impose liquidity requirements that would be...

Radiation safety in educational, medical and research institutions. Regulatory guide G-121

International Nuclear Information System (INIS)

2000-05-01

This regulatory guide is intended to help educational, medical and research institutions design and implement radiation protection programs that meed regulatory requirements. This guide applied to educational, medical or research institutions that require a licence from the CNSC to posses or use radioactive materials. It describes programs to assure that radioactive materials are used safely during licensed activities. (author)

77 FR 40817 - Low-Level Radioactive Waste Regulatory Management Issues

Science.gov (United States)

2012-07-11

...-2011-0012] RIN-3150-AI92 Low-Level Radioactive Waste Regulatory Management Issues AGENCY: Nuclear... regulatory time of compliance for a low-level radioactive waste disposal facility, allowing licensees the... system, and revising the NRC's licensing requirements for land disposal of radioactive waste. DATES: The...

South African Regulatory Framework for Nuclear Power Plant Life Management

International Nuclear Information System (INIS)

Mbebe, B.Z.

2012-01-01

The paper presents the regulatory approach to plant life management (PLiM) adopted by the National Nuclear Regulator (NNR) in South Africa, the licensing basis and regulatory requirements for Koeberg Nuclear Power Station (KNPS),operational programmes ensuring continued safe operation, issues related to the ageing of the plant, and the requirements for spent fuel as well as radioactive waste management. The paper will further present insights from the Periodic Safety Review (PSR) and Long Term Asset Management. (author)

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-08-23

importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.

Safety of Research Reactors. Safety Requirements

International Nuclear Information System (INIS)

2010-01-01

The main objective of this Safety Requirements publication is to provide a basis for safety and a basis for safety assessment for all stages in the lifetime of a research reactor. Another objective is to establish requirements on aspects relating to regulatory control, the management of safety, site evaluation, design, operation and decommissioning. Technical and administrative requirements for the safety of research reactors are established in accordance with these objectives. This Safety Requirements publication is intended for use by organizations engaged in the site evaluation, design, manufacturing, construction, operation and decommissioning of research reactors as well as by regulatory bodies

75 FR 21871 - Spring 2010 Regulatory Agenda

Science.gov (United States)

2010-04-26

... Review 10/00/10 Regulatory Flexibility Analysis Required: No Agency Contact: Tad Wysor, Environmental...: wysor.tad@epamail.epa.gov Tom Eagles, Environmental Protection Agency, Air and Radiation, 6103A...

78 FR 1562 - Improving Government Regulations; Unified Agenda of Federal Regulatory and Deregulatory Actions

Science.gov (United States)

2013-01-08

... agenda incorporates the objective and criteria, when applicable, of the regulatory reform program under the Executive Order and other regulatory guidance. It contains DoD issuances initiated by DoD... statutory administration requirements as required. Starting with the fall 2007 edition, the Internet became...

Communication and Consultation with Interested Parties by the Regulatory Body. General Safety Guide

International Nuclear Information System (INIS)

2017-01-01

This Safety Guide provides recommendations on meeting the safety requirements concerning communication and consultation with the public and other interested parties by the regulatory body about the possible radiation risks associated with facilities and activities, and about processes and decisions of the regulatory body. The Safety Guide can be used by authorized parties in circumstances where there are regulatory requirements placed on them for communication and consultation. It may also be used by other organizations or individuals considering their responsibilities for communication and consultation with interested parties.

Regulation for continuous improvements - the new regulatory strategy of SKI

International Nuclear Information System (INIS)

Hoegberg, L.; Svensson, G.; Viktorsson, C.

1998-01-01

This paper describes the new regulatory objectives and strategy of the Swedish Nuclear Power Inspectorate. Factors that have influenced the development of the regulatory strategy, including an international peer review, are discussed. In addition to general technical requirements for a defence in depth, the new strategy strongly focuses on the quality of plant safety management processes, to be monitored by process-oriented inspections. Also, quality assurance of regulatory activities is stressed. Experience gained so far shows that the regulatory approach chosen in Sweden promotes utility self assessment, quality of safety management and ownership of safety work within the utility staff. (author)

Air Quality Science and Regulatory Efforts Require Geostationary Satellite Measurements

Science.gov (United States)

Pickering, Kenneth E.; Allen, D. J.; Stehr, J. W.

2006-01-01

Air quality scientists and regulatory agencies would benefit from the high spatial and temporal resolution trace gas and aerosol data that could be provided by instruments on a geostationary platform. More detailed time-resolved data from a geostationary platform could be used in tracking regional transport and in evaluating mesoscale air quality model performance in terms of photochemical evolution throughout the day. The diurnal cycle of photochemical pollutants is currently missing from the data provided by the current generation of atmospheric chemistry satellites which provide only one measurement per day. Often peak surface ozone mixing ratios are reached much earlier in the day during major regional pollution episodes than during local episodes due to downward mixing of ozone that had been transported above the boundary layer overnight. The regional air quality models often do not simulate this downward mixing well enough and underestimate surface ozone in regional episodes. Having high time-resolution geostationary data will make it possible to determine the magnitude of this lower-and mid-tropospheric transport that contributes to peak eight-hour average ozone and 24-hour average PM2.5 concentrations. We will show ozone and PM(sub 2.5) episodes from the CMAQ model and suggest ways in which geostationary satellite data would improve air quality forecasting. Current regulatory modeling is typically being performed at 12 km horizontal resolution. State and regional air quality regulators in regions with complex topography and/or land-sea breezes are anxious to move to 4-km or finer resolution simulations. Geostationary data at these or finer resolutions will be useful in evaluating such models.

Regulatory Oversight Program, July 1, 1993--March 3, 1997. Volume 2: Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On July, 1993, a Regulatory Oversight (RO) organization was established within the US DOE, Oak Ridge Operations to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the OR program was to ensure continued plant safety, safeguards and security while the plants were transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). Volume 2 contains copies of the documents which established the relationship between NRC, DOE, USEC, and DOL (Dept of Labor) required to facilitate regulatory oversight transition.

Regulatory Oversight Program, July 1, 1993 - March 3, 1997. Volume 2: Appendices

International Nuclear Information System (INIS)

1997-01-01

On July, 1993, a Regulatory Oversight (RO) organization was established within the US DOE, Oak Ridge Operations to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the OR program was to ensure continued plant safety, safeguards and security while the plants were transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). Volume 2 contains copies of the documents which established the relationship between NRC, DOE, USEC, and DOL (Dept of Labor) required to facilitate regulatory oversight transition

Regulatory compliance analysis for the closure of single-shell tanks

International Nuclear Information System (INIS)

Smith, E.H.; Boomer, K.D.; Letourneau, M.; Oakes, L.; Lorang, R.

1991-08-01

This document provides a regulatory compliance analysis of the baseline environmental protection requirements for the closure of single-shell tanks. In preparing this document, the Westinghouse Hanford Company has analyzed the regulatory pathways and decisions points that have been identified to data through systems engineering and related studies as they relate to environmental protection. This regulatory compliance analysis has resulted in several conclusions that will aid the US Department of Energy in managing the single-shell tank waste and in developing strategies for the closure of these tanks. These conclusions include likely outcomes of current strategies, regulatory rulings that are required for future actions, variances and exemptions to be pursued, where appropriate, and potential rulings that may affect systems engineering and other portions of the single-shell tank closure effort. The conclusions and recommendations presented here are based on analysis of current regulations, regulatory exemptions and variances, and federal facility agreements. Because the remediation of the single-shell tanks will span 30 years, regulations that have yet to be promulgated and future interpretations of existing laws and regulations may impact the recommendations and conclusions presented here. 50 refs., 22 figs

FOXP3: required but not sufficient. the role of GARP (LRRC32) as a safeguard of the regulatory phenotype.

Science.gov (United States)

Probst-Kepper, M; Balling, R; Buer, J

2010-08-01

FOXP3 is essential for the development and function of regulatory CD4(+)CD25(hi) T (T(reg)) cells. However, recent evidence suggests that FOXP3 alone is not sufficient to completely explain the regulatory phenotype of these key players in autoimmunity and inflammation: after being activated, conventional human CD4(+) T cells transiently up-regulate FOXP3 without acquiring a regulatory function. Researchers have recently found that glycoprotein A repetitions predominant (GARP, or LRRC32) is a T(reg)-specific receptor that binds latent TGF-beta and dominantly controls FOXP3 and the regulatory phenotype via a positive feedback loop. This finding provides a missing link in our molecular understanding of FOXP3 in T(reg) cells. This viewpoint focuses on GARP as safeguard of FOXP3 and the regulatory phenotype.

Quality Assurance Source Requirements Traceability Database

International Nuclear Information System (INIS)

MURTHY, R.; NAYDENOVA, A.; DEKLEVER, R.; BOONE, A.

2006-01-01

At the Yucca Mountain Project the Project Requirements Processing System assists in the management of relationships between regulatory and national/industry standards source criteria, and Quality Assurance Requirements and Description document (DOE/R W-0333P) requirements to create compliance matrices representing respective relationships. The matrices are submitted to the U.S. Nuclear Regulatory Commission to assist in the commission's review, interpretation, and concurrence with the Yucca Mountain Project QA program document. The tool is highly customized to meet the needs of the Office of Civilian Radioactive Waste Management Office of Quality Assurance

Cooperation of Ukrainian regulatory authorities in the SIP

Energy Technology Data Exchange (ETDEWEB)

Kutina, L.; Bachner, D.; Bykov, V.; Erickson, L.; Kondralyev, S.; Redko, V.; Simonov, I.; Vasilchenko, V. [SSTC NRS, Stusa St. 35-37, 03142, Kyiv (Ukraine)

2003-07-01

The State Nuclear Regulatory Committee of Ukraine (SNRCU) supported by the State Scientific and Technical Center (SSTC) and the Licensing consultant (LC - RISKAUDIT/SCIENTECH) coordinates the activities of other regulatory authorities (RA) within the Shelter Implementation Plan (SIP) licensing. A protocol on cooperation and differentiation of competence in the SIP has been agreed between SNRCU and other RA (Ecology, Health, Construction, Occupational safety, Fire). The RA intended to carry out their activities such that SIP be implemented in the most efficient way by: - providing the Chernobyl NPP with a possibility to choose optimal variants for Shelter transformation; - minimizing required regulatory steps for SIP; - reviewing SIP documents at the initial stages of development of SIP designs; - providing consultative support by technical support organizations (TSO) on the SIP designs; - relating regulatory decisions on safety issues to the competence of the inspection at the Chernobyl NPP site. Coordination of regulatory activity and cooperation in safety areas are presented.

Regulatory Framework and Radiation Protection as Basis for Evaluation

International Nuclear Information System (INIS)

Elegba, S.B.

2010-01-01

Regulatory Framework for Nuclear Safety and Radiation Protection International Instruments: Conventions; Safety Fundamentals; Codes of Conduct; Safety Requirements and Guide, and National Instruments:-Legislation; Regulations; Guidance Documents. The Sustainable Development Principle recognizes a duty to prevent undue burden and degradation of the environment for future generations. The prime responsibility for safety must rest with the person or organization responsible for facilities…that give rise to radiation risks” (IAEA Safety Fundamentals – SF-1). Compliance with regulations and requirements imposed by the Regulatory Body shall not relieve the organization of its prime responsibility for safety. The regulatory body shall establish and implement appropriate arrangements for a systematic approach to quality management which extend throughout the range of responsibilities and functions undertaken.”. The IAEA self-assessment model for a Regulatory Body is based on a three tier approach. This model is modular and can be used and adopted for implementation by any regulator at any stage of maturity “Start up”, “On the way”, “Mature” Small, medium size, big. The IAEA is required by its Statute to promote international cooperation while regulating safety is a national responsibility. However, radiation risks may transcend national borders and international cooperation that serves to promote and enhance safety globally by exchanging experience and by improving capabilities to control hazards, to prevent accidents, to respond to emergencies and to mitigate any harmful consequences

Building Nuclear Safety and Security Culture Within Regulatory Body

International Nuclear Information System (INIS)

Huda, K.

2016-01-01

To achieve a higher level of nuclear safety and security, it needs to develop the safety and security culture not only in the facility but also in the regulatory body. The regulatory body, especially needs to develop the safety and security culture within the organization, because it has a function to promote and oversee the culture in the facilities. In this sense, the regulatory body should become a role model. Development of the nuclear safety and security culture should be started by properly understanding its concept and awakening the awareness of individual and organization on the importance of nuclear safety and security. For effectiveness of the culture development in the regulatory body, the following steps are suggested to be taken: setting up of the regulatory requirements, self-assessment, independent assessment review, communication with the licensee, oversight of management system implementation, and integration with regulatory activities. The paper discusses those steps in the framework of development of nuclear safety and security culture in the regulatory body, as well as some important elements in building of the culture in the nuclear facilities. (author)

Characterization of noncoding regulatory DNA in the human genome.

Science.gov (United States)

Elkon, Ran; Agami, Reuven

2017-08-08

Genetic variants associated with common diseases are usually located in noncoding parts of the human genome. Delineation of the full repertoire of functional noncoding elements, together with efficient methods for probing their biological roles, is therefore of crucial importance. Over the past decade, DNA accessibility and various epigenetic modifications have been associated with regulatory functions. Mapping these features across the genome has enabled researchers to begin to document the full complement of putative regulatory elements. High-throughput reporter assays to probe the functions of regulatory regions have also been developed but these methods separate putative regulatory elements from the chromosome so that any effects of chromatin context and long-range regulatory interactions are lost. Definitive assignment of function(s) to putative cis-regulatory elements requires perturbation of these elements. Genome-editing technologies are now transforming our ability to perturb regulatory elements across entire genomes. Interpretation of high-throughput genetic screens that incorporate genome editors might enable the construction of an unbiased map of functional noncoding elements in the human genome.

Classical dendritic cells are required for dietary antigen-mediated peripheral regulatory T cell and tolerance induction

Science.gov (United States)

Esterházy, Daria; Loschko, Jakob; London, Mariya; Jove, Veronica; Oliveira, Thiago Y.; Mucida, Daniel

2016-01-01

Oral tolerance prevents pathological inflammatory responses towards innocuous foreign antigens via peripheral regulatory T cells (pTreg cells). However, whether a particular subset of antigen-presenting cells (APCs) is required during dietary antigen exposure to instruct naïve CD4+ T cells to differentiate into pTreg cells has not been defined. Using myeloid lineage-specific APC depletion in mice, we found that monocyte-derived APCs are dispensable, while classical dendritic cells (cDCs) are critical for pTreg cell induction and oral tolerance. CD11b− cDCs from the gut-draining lymph nodes efficiently induced pTreg cells, and conversely, loss of IRF8-dependent CD11b− cDCs impaired their polarization, although oral tolerance remained intact. These data reveal the hierarchy of cDC subsets in pTreg cell induction and their redundancy during oral tolerance development. PMID:27019226

Evaluation of New Chemical Entities as Substrates of Liver Transporters in the Pharmaceutical Industry: Response to Regulatory Requirements and Future Steps.

Science.gov (United States)

Okudaira, Noriko

2017-09-01

This article discusses the evaluation of drug candidates as hepatic transporter substrates. Recently, research on the applications of hepatic transporters in the pharmaceutical industry has improved to meet the requirements of the regulatory guidelines for the evaluation of drug interactions. To identify the risk of transporter-mediated drug-drug interactions at an early stage of drug development, we used a strategy of reviewing the in vivo animal pharmacokinetics and tissue distribution data obtained in the discovery stage together with the in vitro data obtained for regulatory submission. In the context of nonclinical evaluation of new chemical entities as medicines, we believe that transporter studies are emerging as a key strategy to predict their pharmacological and toxicological effects. In combination with the recent progress in systems approaches, the estimation of effective concentrations in the target tissues, by using mathematical models to describe the transporter-mediated distribution and elimination, has enabled us to identify promising compounds for clinical development at the discovery stage. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Inspection and enforcement by the regulatory body for nuclear power plants

International Nuclear Information System (INIS)

1980-01-01

This Safety Guide was prepared as part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to nuclear power plants. It supplements the Code of Practice on Governmental Organization for the Regulation of Nuclear Power Plants, IAEA Safety Series No.50-C-G and should be used in conjunction with that document. The purpose of this Guide is to provide information, guidance and recommendations to assist Member States in (1) establishing and conducting a regulatory inspection programme for nuclear power plants, (2) establishing requirements for the applicant/licensee in regard to regulatory inspection, (3) establishing a system for enforcing compliance with the requirements and decisions of the regulatory body

Assessment of regulatory effectiveness. Peer discussions on regulatory practices

International Nuclear Information System (INIS)

1999-09-01

This report arises from the seventh series of peer discussions on regulatory practices entitled 'Assessment of Regulatory Effectiveness'. The term 'regulatory effectiveness' covers the quality of the work and level of performance of a regulatory body. In this sense, regulatory effectiveness applies to regulatory body activities aimed at preventing safety degradation and ensuring that an acceptable level of safety is being maintained by the regulated operating organizations. In addition, regulatory effectiveness encompasses the promotion of safety improvements, the timely and cost effective performance of regulatory functions in a manner which ensures the confidence of the operating organizations, the general public and the government, and striving for continuous improvements to performance. Senior regulators from 22 Member States participated in two peer group discussions during March and May 1999. The discussions were focused on the elements of an effective regulatory body, possible indicators of regulatory effectiveness and its assessment. This report presents the outcome of these meetings and recommendations of good practices identified by senior regulators, which do not necessarily reflect those of the governments of the nominating Member States, the organizations they belong to, or the International Atomic Energy Agency. In order to protect people and the environment from hazards associated with nuclear facilities, the main objective of a nuclear regulatory body is to ensure that a high level of safety in the nuclear activities under its jurisdiction is achieved, maintained and within the control of operating organizations. Even if it is possible to directly judge objective safety levels at nuclear facilities, such safety levels would not provide an exclusive indicator of regulatory effectiveness. The way the regulatory body ensures the safety of workers and the public and the way it discharges its responsibilities also determine its effectiveness. Hence the

Improving clinical drug development regulatory procedures for anticonvulsants

Directory of Open Access Journals (Sweden)

Janković Slobodan

2015-01-01

Full Text Available Background: Clinical development of antiepileptic drugs is demanding due to complex character of the disorder and to diversity of its forms and etiologies. Objective: The aim of this review was to suggest improvements in regulatory procedures for clinical development of antiepileptic drugs. Methods: The following databases of scientific articles were searched: MEDLINE, SCOPUS and SCINDEKS. In total 558 publications were retrieved. The types of articles selected were reviews, reports on clinical trials and letters to the Editor. Results: There are several changes of regulatory documents necessary for improving process of clinical development of antiepileptic drugs: preference of parallel groups design for add-on trials should be explicit; the noninferiority design for monotherapy clinical trials should be acceptable; restrictive formulations when trials of antiepileptic drugs in children are in question should be avoided; requirements in regard to the efficacy measures should be harmonized among the regulatory bodies; proactive attitude towards discovery of adverse events; and precise requirements for clinical trials specifically designed to prove anti-epileptogenic effects should be made clear. Conclusion: Current regulatory documents are incomplete in many aspects; an international effort to improve and harmonize guidelines for clinical development of antiepileptic drugs is necessary for improvement of this process.

Regulatory Framework of Safety for HTGR

International Nuclear Information System (INIS)

Huh, Chang Wook; Suh, Nam Duk

2011-01-01

Recent accident in Fukushima Daiichi plant in Japan makes big impacts on the future of nuclear business. Many countries are changing their nuclear projects and increased safety of nuclear plants is asked for from the public. Without providing safety the society accepts, it might be almost impossible to build new plants further. In this sense high temperature gas-cooled reactor (HTGR) which is under development needs to be licensed reflecting this new expectation regarding safety. It means we should have higher level of safety goal and a systematic regulatory framework to assure the safety. In our previous paper, we evaluated the current safety goal and design practice in view of this new safety expectation after Fukushima accident. It was argued that a top-down approach starting from safety goal is necessary to develop safety requirements or to assure safety. Thus we need to propose an ultimate safety goal public accepts and then establish a systematic regulatory framework. In this paper we are going to provide a conceptual regulatory framework to guarantee the safety of HTGR. Section 2 discusses the recent trend of IAEA safety requirements and then summarize the HTGR design approach. Incorporating these discussions, we propose a conceptual framework of regulation for safety of HTGR

Meeting the regulatory information needs of users of radioactive materials

International Nuclear Information System (INIS)

MacDurmon, G.W.

1996-01-01

The use of radioactive materials is one of the most regulated areas of research. Researchers face ever increasing regulatory requirements and issues involving the disposal of radioactive material, while meeting the demands of higher productivity. Radiation safety programs must maximize regulatory compliance, minimize barriers, provide services and solutions, and effectively communicate with users of radioactive materials. This talk will discuss methods by which a radiation safety program can meet the needs of both the research staff and regulatory compliance staff

Meeting the regulatory information needs of users of radioactive materials

Energy Technology Data Exchange (ETDEWEB)

MacDurmon, G.W. [American Cyanamid Company, Princeton, NJ (United States)

1996-10-01

The use of radioactive materials is one of the most regulated areas of research. Researchers face ever increasing regulatory requirements and issues involving the disposal of radioactive material, while meeting the demands of higher productivity. Radiation safety programs must maximize regulatory compliance, minimize barriers, provide services and solutions, and effectively communicate with users of radioactive materials. This talk will discuss methods by which a radiation safety program can meet the needs of both the research staff and regulatory compliance staff.

The regulatory requirements, design bases, researches and assessments in the field of Ukrainian NPP's seismic safety

International Nuclear Information System (INIS)

Mykolaychuk, O.; Mayboroda, O.; Krytskyy, V.; Karnaukhov, O.

2001-01-01

State Nuclear Regulatory Authority of Ukraine (SNRA) pays large attention to problem of nuclear installations seismic stability. As a result the seismic design regulatory guides is revised, additional seismic researches of NPP sites are conducted, seismic reassessment of NPP designs were begun. The experts involved address all seismic related factors under close contact with the staff of NPP, design institutes and research organizations. This document takes stock on the situation and the research programs. (author)

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

International Nuclear Information System (INIS)

Moe, Wayne Leland

2015-01-01

technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.

78 FR 44403 - Unified Agenda of Federal Regulatory and Deregulatory Actions

Science.gov (United States)

2013-07-23

... agenda (the Agenda) in accordance with Public Law 96-354, ``The Regulatory Flexibility Act,'' and... goals; (2) support for the Strategic Plan organizational excellence objectives; (3) a governmental... Flexibility Act Section 610 of the Regulatory Flexibility Act (RFA) requires agencies to conduct a review...

Current regulatory and licensing status for byproduct sources, facilities and applications

International Nuclear Information System (INIS)

Tingey, G.L.; Jensen, G.A.; Hazelton, R.F.

1985-02-01

Public use of nuclear byproducts, especially radioactive isotopes, will require approval by various regulatory agencies. Use of cesium-137 as an irradiation source for sterilizing medical products will require US Nuclear Regulatory Commission (NRC) approval. Two applications have been filed with NRC, and approval is expected soon. Widespread use of irradiation for food products depends on a favorable ruling by the Food and Drug Administration (FDA). A ruling is pending that would permit irradiation of fruits and vegetables up to 100 krad. NRC also controls the use of isotopes in remote power generators, but little regulatory action has been required in recent years. Recent development of radioluminescent (RL) lighting for runway lights has led to interest by commercial manufacturers. At the present time, a license has been issued to at least one manufacturer for sale of tritium-powered runway lights. 28 refs., 1 fig

Regulatory approvals in a large multinational clinical trial: the ESPRIT experience.

Science.gov (United States)

McNay, Laura A; Tavel, Jorge A; Oseekey, Karen; McDermott, Cathy M; Mollerup, David; Bebchuk, Judith D

2002-02-01

While accepted as serving an important function to safeguard human subjects, the process of obtaining regulatory approvals to conduct clinical trials is generally regarded as cumbersome and time-consuming. For large multinational trials, U.S. federally sponsored human subject research abroad involves specific U.S. regulatory requirements, in addition to those of the host country, that act as further hurdles. These requirements may include obtaining an Assurance of Protection for Human Subjects from the Office of Human Research Protection of the U.S. Department of Health and Human Services, maintaining specific Ethics Committee/Institutional Review Board (EC/IRB) composition, and incorporating mandated elements in informed consents, all of which may differ from local policies and guidelines. Specific examples of issues that led to delays in regulatory approvals for sites participating in the multinational clinical trial entitled Evaluation of Subcutaneous Proleukin in a Randomized International Trial (ESPRIT) are presented here. While the goal of these requirements is to protect the rights and welfare of human subjects, they may create substantial delays and engender resentment over the notion of lack of respect for individual country sovereignty. Substudies within ESPRIT have been undertaken to obtain feedback from EC/IRB chairpersons, site personnel responsible for processing the required assurances, ESPRIT investigators, and study participants regarding aspects of current U.S. regulatory requirements related to human subject protection and ethical issues in multinational research. The purpose of these substudies is to compare the attitudes and experiences across countries regarding important ethical issues associated with conducting ESPRIT. One objective of the substudies is to gather additional insight to the impact of U.S. regulatory processes. Another is to help to inform the debate about how to best maximize the rights and welfare of clinical trial

Regulatory considerations for computational requirements for nuclear criticality safety

International Nuclear Information System (INIS)

Bidinger, G.H.

1995-01-01

As part of its safety mission, the U.S. Nuclear Regulatory Commission (NRC) approves the use of computational methods as part of the demonstration of nuclear criticality safety. While each NRC office has different criteria for accepting computational methods for nuclear criticality safety results, the Office of Nuclear Materials Safety and Safeguards (NMSS) approves the use of specific computational methods and methodologies for nuclear criticality safety analyses by specific companies (licensees or consultants). By contrast, the Office of Nuclear Reactor Regulation approves codes for general use. Historically, computational methods progressed from empirical methods to one-dimensional diffusion and discrete ordinates transport calculations and then to three-dimensional Monte Carlo transport calculations. With the advent of faster computational ability, three-dimensional diffusion and discrete ordinates transport calculations are gaining favor. With the proper user controls, NMSS has accepted any and all of these methods for demonstrations of nuclear criticality safety

Different regulatory strategies in regulation of nuclear power projects: An Indian experience

International Nuclear Information System (INIS)

Khan, Sohail Ahmad

2002-01-01

Regulatory strategy needed for management of safety and safety culture involves careful planning and use of engineering concepts keeping in mind feasibility to implement certain safety requirements. It also requires adequate attention on working environment and mental conditions of designers, operating and maintenance staff and regulators. Different strategies followed during safety review and regulatory inspection of nuclear power projects for improving status of safety management and safety cultures have given certain results. The present paper brings out certain experience gained during regulation of Indian Nuclear Power Projects by Atomic Energy Regulatory Board of India in the area of management of safety and safety culture. (author)

Issues and regulatory requirements for the connection of wind generation

Energy Technology Data Exchange (ETDEWEB)

Gimenez Alvarez, J.M. [National University of San Juan (Argentina)], E-mail: jgimenez@unsj.edu.ar; Gomez Targarona, J.C. [National University of Rio Cuarto, Cordoba (Argentina). Electric Power Systems Protection Institute (IPSEP)], E-mail: jcgomez@ing.unrc.edu.ar

2009-07-01

Pollution problems such as greenhouse effect as well as the high value and volatility of fuel prices have forced and accelerated the development and use of renewable energy sources. In this work a complete revision of wind generation is presented. In the first part a brief history of the wind energy developments is detailed. Next, some commentaries related to the present and future state are made. Then, a revision of the modern structures of wind generation is realized. In fourth place it is included a brief comparison between small and big size turbines. Then, different types of energy storage are mentioned. Finally regulatory aspects are discussed, respect to the treatment of the technical problems. (author)

Containment leakage rate testing requirements

International Nuclear Information System (INIS)

Arndt, E.G.

1992-01-01

This report presents the status of several documents under revision or development that provide requirements and guidance for testing nuclear power plant containment systems for leakage rates. These documents include the general revision to 10 CFR Part 50, Appendix J; the regulatory guide affiliated with the revision to Appendix J; the national standard that the regulatory guide endorses, ANSI/ANS-56.8, 'Containment System Leakage Rate Testing Requirements'; and the draft industry Licensing Topical Report, 'Standardized Program for Primary Containment Integrity Testing'. The actual or potential relationships between these documents are also explored

Regulatory challenges associated with conducting multicountry clinical trials in resource-limited settings.

Science.gov (United States)

Ndebele, Paul; Blanchard-Horan, Christina; Shahkolahi, Akbar; Sanne, Ian

2014-01-01

International public health and infectious diseases research has expanded to become a global enterprise transcending national and continental borders in organized networks addressing high-impact diseases. In conducting multicountry clinical trials, sponsors and investigators have to ensure that they meet regulatory requirements in all countries in which the clinical trials will be conducted. Some of these requirements include review and approval by national drug regulatory authorities and recognized research ethics committees. A limiting factor to the efficient conduct of multicountry clinical trials is the regulatory environment in each collaborating country, with significant differences determined by various factors including the laws and the procedures used in each country. The long regulatory processes in resource-limited countries may hinder the efficient implementation of multisite clinical trials, delaying research important to the health of populations in these countries and costing millions of dollars a year.

Strengthening Regulatory Competence through Techno-managerial Knowledge Integration: Indian Experience

International Nuclear Information System (INIS)

Kuchibhotla, S.

2016-01-01

Competence development is the process of identifying the competencies required to perform a given job, role or set of tasks successfully at workplace. Strengthening regulatory competence, for the nuclear regulator, is essential to ensure skilled and competent human resources for performing the functions of the Regulatory Body. The strengthening of existing competence level for the Indian nuclear regulator, takes into account the understanding of the elements such as legal basis and regulatory processes governing operations of regulatory body, technological competences for performing regulatory functions, competences pertinent to regulatory practices, and competences related to personal and interpersonal effectiveness within the organization. Competency data from AERB divisions was compiled to identify gaps at various positions with recommendations for making specialized training modules and modifications to basic and refresher training modules. The exercise is aimed at providing continual improvement in skills and knowledge of human resources at AERB in a phased manner. (author)

Review of Legislation and Regulatory Framework in Ukraine with Regard to Environmental Radiation Monitoring

International Nuclear Information System (INIS)

Goldammer, Wolfgang; Batandjieva, Borislava; Nasvit, Oleg; German, Olga

2009-06-01

The aim of this review is to compare the current legal basis and regulatory framework in Ukraine to the relevant international safety requirements and to identify shortcomings, such as deficiencies and internal contradictions. However, no assessment of its practical implementation is made beyond the aspects related to environmental radiation monitoring. The report focuses on 13 areas present in the in the Ukrainian legislation and regulatory framework: R-1 Radiation monitoring R-2 Definition of responsibilities R-3 Normal situations R-4 Emergencies R-5 Long-term monitoring R-6 Intervention in cases of lasting exposure R-7 Use of monitoring data R-8 Record keeping R-9 Reporting to the regulatory authority R-10 Public information R-11 Human and financial resources R-12 Transboundary aspects R-13 Quality assurance. For each topic a description of the current situation and an evaluation is carried out. Ranking is then supplied supported by its evaluation. In brief these categories are: A: The national legal and regulatory documents are harmonised in substance with the international safety requirements; B: Substantial differences exist between the national and international requirements which should be addressed with the view to harmonise the legislation; C: Substantial deficiencies exist in the legal and/or regulatory bases which results in no or at least partial compliance with international safety requirements. P: In addition practical issues are also provided to indicates where practical implementation of the legislation and regulatory basis is not adequate in all respects. This report then presents main observations and conclusions of the review. On this basis, the report derives general suggestions for improvement of the legal and regulatory bases. These should be considered by the Ukrainian Government and the regulatory authorities within an action plan to improve the legal basis for radiological monitoring of the environment and to facilitate its implementation

Review of Legislation and Regulatory Framework in Ukraine with Regard to Environmental Radiation Monitoring

Energy Technology Data Exchange (ETDEWEB)

Goldammer, Wolfgang; Batandjieva, Borislava (Private Consultants (Ukraine)); Nasvit, Oleg (National Security and Defence Council of Ukraine, Kyiv (Ukraine)); German, Olga (Swedish Radiation Safety Authority, Stockholm (Sweden))

2009-06-15

The aim of this review is to compare the current legal basis and regulatory framework in Ukraine to the relevant international safety requirements and to identify shortcomings, such as deficiencies and internal contradictions. However, no assessment of its practical implementation is made beyond the aspects related to environmental radiation monitoring. The report focuses on 13 areas present in the in the Ukrainian legislation and regulatory framework: R-1 Radiation monitoring R-2 Definition of responsibilities R-3 Normal situations R-4 Emergencies R-5 Long-term monitoring R-6 Intervention in cases of lasting exposure R-7 Use of monitoring data R-8 Record keeping R-9 Reporting to the regulatory authority R-10 Public information R-11 Human and financial resources R-12 Transboundary aspects R-13 Quality assurance. For each topic a description of the current situation and an evaluation is carried out. Ranking is then supplied supported by its evaluation. In brief these categories are: A: The national legal and regulatory documents are harmonised in substance with the international safety requirements; B: Substantial differences exist between the national and international requirements which should be addressed with the view to harmonise the legislation; C: Substantial deficiencies exist in the legal and/or regulatory bases which results in no or at least partial compliance with international safety requirements. P: In addition practical issues are also provided to indicates where practical implementation of the legislation and regulatory basis is not adequate in all respects. This report then presents main observations and conclusions of the review. On this basis, the report derives general suggestions for improvement of the legal and regulatory bases. These should be considered by the Ukrainian Government and the regulatory authorities within an action plan to improve the legal basis for radiological monitoring of the environment and to facilitate its implementation

47 CFR 1.1165 - Payment by cashier's check for regulatory fees.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Payment by cashier's check for regulatory fees. 1.1165 Section 1.1165 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND... regulatory fees. Payment by cashier's check may be required when a person or organization makes payment, on...

Establishing exemption and clearance criteria by the regulatory authority

International Nuclear Information System (INIS)

Salih, A.E.A.

2012-04-01

This Project work discusses the relationship between the concepts of exemption and clearance, and their practical use in the overall scheme of regulatory control of practices. It also discusses how exemptions and clearance is established and the scope of its applications for regulatory control. The concept of general clearance levels for any type of material and any possible pathway of disposal is also introduced in this work. Guidance of the Group of Experts establishing scenarios for general clearance, parameter values, and a nuclide-specific list of calculated clearance levels is also presented. Regulatory authorities are required to develop guidance on exemption and clearance levels to assist licensees and registrants to know which practices and sources within practices are exempted from regulatory control and those to be cleared from further controls. Exemption and clearance levels are tools for assisting the Regulatory Authority to optimize the use of resources. (author)

Regulatory controls for NORM contamination: Emerging issues and strategies

International Nuclear Information System (INIS)

Wennerberg, Linda

1992-01-01

Naturally occurring and accelerator-produced radioactive material (NORM) faces the increasing likelihood of federal or state regulatory control. Public concern and limited preliminary survey data fuel the debate over the necessity, approach, and jurisdiction of a NORM regulatory strategy. This debate requires the resolution of technical controversies and potentially competing state and federal agency interests. An additional facet of the debate is the impact of regulation upon traditionally non-nuclear industries, such as oil and gas production. Regulatory response has been initiated in several states, such as Louisiana's controls on equipment used in oil and gas production, to control specific industrial activities which generate NORM. A more comprehensive, generic federal strategy to control NORM contamination is also under review by the Environmental Protection Agency. This paper will detail the emerging technical issues, federal and state regulatory strategies under consideration, and evaluate the efficacy of selected regulatory approaches. (author)

Regulatory uncertainty and the associated business risk for emerging technologies

International Nuclear Information System (INIS)

Hoerr, Robert A.

2011-01-01

An oversight system specifically concerned with nanomaterials should be flexible enough to take into account the unique aspects of individual novel materials and the settings in which they might be used, while recognizing that heretofore unrecognized safety issues may require future modifications. This article considers a question not explicitly considered by the project team: what is the risk that uncertainty over how regulatory oversight will be applied to nanomaterials will delay or block the development of this emerging technology, thereby depriving human health of potential and substantial benefits? An ambiguous regulatory environment could delay the availability of valuable new technology and therapeutics for human health by reducing access to investment capital. Venture capitalists list regulatory uncertainty as a major reason not to invest at all in certain areas. Uncertainty is far more difficult to evaluate than risk, which lends itself to quantitative models and can be factored into projections of return on possible investments. Loss of time has a large impact on investment return. An examination of regulatory case histories suggests that an increase in regulatory resting requirement, where the path is well-defined, is far less costly than a delay of a year or more in achieving product approval and market launch.

Regulatory uncertainty and the associated business risk for emerging technologies

Science.gov (United States)

Hoerr, Robert A.

2011-04-01

An oversight system specifically concerned with nanomaterials should be flexible enough to take into account the unique aspects of individual novel materials and the settings in which they might be used, while recognizing that heretofore unrecognized safety issues may require future modifications. This article considers a question not explicitly considered by the project team: what is the risk that uncertainty over how regulatory oversight will be applied to nanomaterials will delay or block the development of this emerging technology, thereby depriving human health of potential and substantial benefits? An ambiguous regulatory environment could delay the availability of valuable new technology and therapeutics for human health by reducing access to investment capital. Venture capitalists list regulatory uncertainty as a major reason not to invest at all in certain areas. Uncertainty is far more difficult to evaluate than risk, which lends itself to quantitative models and can be factored into projections of return on possible investments. Loss of time has a large impact on investment return. An examination of regulatory case histories suggests that an increase in regulatory resting requirement, where the path is well-defined, is far less costly than a delay of a year or more in achieving product approval and market launch.

Methodology For Evaluation Of Regulatory Effectiveness In Physical Protection

International Nuclear Information System (INIS)

Izmaylov, Alexander; Valente, John; Griggs, James R.; Rexroth, Paul; Piskarev, Alexander; Babkin, Vladimir; Sokolov, Egor; Melton, Ronald B.; Cunningham, Mitchel E.; Baker, Kathryn A.; Brothers, Alan J.

2005-01-01

Material protection, control, and accounting (MPC and A) regulatory documents play an important role in securing and protecting nuclear material by regulating a variety of activities at different hierarchical levels. The development, implementation, and practical application of these regulatory documents requires a significant investment of financial and material resources. Therefore, it is important to evaluate the effectiveness of the regulatory development process and the extent to which regulations improve the effectiveness of MPC and A at nuclear sites. The joint Russian and U.S. Regulatory Development Project has a goal of evaluating the effectiveness of regulatory documents developed for MPC and A. As part of this joint Project, a methodology for evaluating effectiveness has been developed. This methodology was developed around physical protection objectives. The developed methodology specifies physical protection objectives to be accomplished through the implementation of a regulatory system based on the physical protection goals at the nuclear sites. It includes approaches to assessing regulatory effectiveness, the hierarchical structure of physical protection objectives to be accomplished through implementing regulations, a 'mapping' of the physical protection objectives to the regulatory framework, a list of criteria for evaluating the effectiveness of physical protection regulations and effectiveness indicators, as well as means and methods for gathering information and implementation of this evaluation.

Sustaining Nuclear Safety: Upholding the Core Regulatory Values

International Nuclear Information System (INIS)

Kumar, S.

2016-01-01

Nuclear Energy and management of safety therein, has a somewhat distinct streak in that from its early days it has had the privilege of being shaped and supervised by the eminent scientists and engineers, in fact it owes its very origin to them. This unique engagement has resulted in culmination of the several safety elements like defence-in-depth in the form of multiple safety layers, redundancy, diversity and physical separation of components, protection against single failures as well as common cause failures right at the beginning of designing a nuclear reactor. The fundamental principles followed by regulators across the globe have many similarities such as, creation of an organization which has a conflict-free primary responsibility of safety supervision, laying down the safety criteria and requirements for the respective industry and developing and using various tools and regulatory methodology to ensure adherence to the laid down regulatory requirements. Yet the regulatory regimes in different States have evolved differently and therefore, has certain attributes which are unique to these and confer on them their identity.

What is a comprehensive system of regulatory governance?

International Nuclear Information System (INIS)

Real diaz, F. J.

2011-01-01

The progressive evolution and diversification of regulations concerning industrial safety has made their management increasingly complex, requiring more resources of organizations. Therefore, it is advisable that this management be made more efficient through systematization, specialization and the use of computing technologies. This is supported by the implementation of integrated regulatory management systems. This article explain the concept of integrated regulatory management systems, their structure and their advantages. It also includes a model for implementing them in an organization. (Author)

Regulatory practices for nuclear power plants in India

Indian Academy of Sciences (India)

decision making, the responsibility for ensuring that the regulatory decisions and enforcement ... and indicate acceptable methods for implementing specific requirements .... commissioning of coolant and moderator systems with light water.

77 FR 61463 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Science.gov (United States)

2012-10-09

... entry of erroneous orders. In addition, the Market Access Rule requires certain regulatory risk... authorized by the broker-dealer. These regulatory risk management controls also include measures designed to...-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness of Proposed Rule...

77 FR 61449 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Science.gov (United States)

2012-10-09

..., regulatory and other risks of this business activity. These controls include financial risk management... entry of erroneous orders. In addition, the Market Access Rule requires certain regulatory risk... authorized by the broker-dealer. These regulatory risk management controls also include measures designed to...

Risk-informing special treatment requirements for reactors

International Nuclear Information System (INIS)

McKenna, E.M.; Reed, T.A.

2001-01-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to make regulatory changes to the scope of structures, systems, and components (SSCs) requiring special treatment. ''Special treatment requirements'' refers to those specific examples of regulations that are applied in order to provide a high degree of assurance that SSC will be capable of performing their intended functions when needed. The current scope of SSCs covered by the special treatment requirements governing commercial nuclear reactors is deterministically based and stems primarily from the evaluation of selected design basis events, as described in updated final safety analysis reports (UFSARs). This regulatory framework provides reasonable assurance of no undue risk to the health and safety of the public. However, recent advances in technology, coupled with operating reactor experience, have suggested that an alternative approach that would use a risk-informed process for evaluating SSC safety significance, would, in turn, result in a more focused determination of which SSCs should receive special treatment requirements. (author)

Characterization of the evolution of the pharmaceutical regulatory environment.

Science.gov (United States)

Shafiei, Nader; Ford, James L; Morecroft, Charles W; Lisboa, Paulo J; Taylor, Mark J

2013-01-01

This paper is part of a research study that is intended to identify pharmaceutical quality risks induced by the ongoing transformation in the industry. This study establishes the current regulatory context by characterizing the development of the pharmaceutical regulatory environment. The regulatory environment is one of the most important external factors that affects a company's organization, processes, and technological strategy. This is especially the case with the pharmaceutical industry, where its products affect the quality of life of the consumers. The quantitative analysis of regulatory events since 1813 and review of the associated literature resulted in identification of six factors influencing the regulatory environment, namely public health protection, public health promotion, crisis management, harmonization, innovation, and modernization. From 1813 to the 1970s the focus of regulators was centered on crisis management and public health protection-a basic mission that has remained consistent over the years. Since the 1980s a gradual move in the regulatory environment towards a greater focus on public health promotion, international harmonization, innovation, and agency modernization may be seen. The pharmaceutical industry is currently going through changes that affect the way it performs its research, manufacturing, and regulatory activities. The impact of these changes on the approaches to quality risk management requires more understanding. The authors are engaged in research to identify elements of the changes that influence pharmaceutical quality. As quality requirements are an integral part of the pharmaceutical regulations, a comprehensive understanding of these regulations is seen as the first step. The results of this study show that (i) public health protection, public health promotion, crisis management, harmonization, innovation, and modernization are factors that affect regulations in the pharmaceutical industry; (ii) the regulators' main

Regulatory control of maintenance activities in Argentine nuclear power plants

International Nuclear Information System (INIS)

Calvo, J.C.; Caruso, G.

2000-01-01

The main maintenance objective is to assure that the safety features of structures, components and systems of nuclear power plants are kept as designed. Therefore, there is a direct relationship between safety and maintenance. Owing to the above mentioned, maintenance activities are considered a relevant regulatory issue for the Argentine Nuclear Regulatory Authority (ARN). This paper describes the regulatory control to maintenance activities of Argentine nuclear power plants. It also addresses essential elements for maintenance control, routine inspections, special inspections during planned outages, audits and license conditions and requirements. (author)

Safety Culture Implementation in Indonesian Nuclear Energy Regulatory Agency (BAPETEN)

International Nuclear Information System (INIS)

Nurwidi Astuti, Y.H.; Dewanto, P.

2016-01-01

The Indonesia Nuclear Energy Act no. 10 of 1997 clearly stated that Nuclear Energy Regulatory Agency (BAPETEN) is the Nuclear Regulatory Body. This is the legal basis of BAPETEN to perform regulatory functions on the use of nuclear energy in Indonesia, including regulation, authorisation, inspection and enforcement. The Independent regulatory functions are stipulated in Article 4 and Article 14 of the Nuclear Energy Act no. 10 (1997) which require the government to establish regulatory body that is reporting directly to the president and has responsibility to control of the use of nuclear energy. BAPETEN has been start fully its functioning on January 4, 1999. In it roles as a regulatory body, the main aspect that continues and always to be developed is the safety culture. One of the objectives of regulatory functions is “to increase legal awareness of nuclear energy of the user to develop safety culture” (Article 15, point d), while in the elucidation of article 15 it is stipulated that “safety culture is that of characteristics and attitudes in organizations and individual that emphasise the importance of safety”.

78 FR 1570 - Semiannual Regulatory Agenda

Science.gov (United States)

2013-01-08

... Deregulatory Priorities. Gregory H. Woods, General Counsel. Energy Efficiency and Renewable Energy--Proposed... Action 10/01/12 77 FR 59719 Regulatory Flexibility Analysis Required: Yes. Agency Contact: Stephen Witkowski, Phone: 202 586-7463, Email: stephen[email protected] . RIN: 1904-AB90 [FR Doc. 2012-31497...

Nuclear regulatory policy concept on safety, security, safeguards and emergency preparedness (3S+EP)

International Nuclear Information System (INIS)

Ilyas, Zurias

2009-01-01

Regulatory Policy is formulated in regulations that stipulate the assurance of workers and public safety and environmental protection. Legislation and regulations on nuclear energy should consider nuclear safety, security and safeguards, as well as nuclear emergency preparedness (3S+EP) and liability for nuclear damage. Specific requirements stipulated in international conventions and agreements should also be taken into account. Regulatory Policy is formulated in regulations that stipulate the assurance of workers and public safety and environmental protection. Legislation and regulations on nuclear energy should consider nuclear safety, security and safeguards, as well as nuclear emergency preparedness (3S+EP) and liability for nuclear damage. Specific requirements stipulated in international conventions and agreements should also be taken into account. By undertaking proper regulatory oversight on Safety, Security and Emergency Preparedness (3S+EP) as an integrated and comprehensive system, safe and secure use of nuclear energy can be assured. Licence requirements and conditions should fulfil regulatory requirements pertaining to 3S+EP for nuclear installation as an integrated system. An effective emergency capacity that can be immediately mobilized is important. The capacity in protecting the personnel before, during and after the disaster should also be planned. Thus, proper emergency preparedness should be supported by adequate resources. The interface between safety, security, safeguards and emergency preparedness has to be set forth in nuclear regulations, such as regulatory requirements; 3S+EP; components, systems and structures of nuclear installations and human resources. Licensing regulations should stipulate, among others, DIQ, installations security system, safety analysis report, emergency preparedness requirements and necessary human resources that meet the 3S+EP requirements.

Interpretation of ALARA in the Canadian regulatory framework

Energy Technology Data Exchange (ETDEWEB)

Utting, R. [Atomic Energy Control Board, Ottawa, Ontario (Canada)

1995-03-01

The Atomic Energy Control Board (AECB) is responsible for the regulation of all aspects of atomic energy in Canada. This includes the complete nuclear fuel cycle from uranium mining to long-term disposal of nuclear fuel, as well as the medical and industrial utilization of radioisotopes. Clearly, the regulatory approach will differ from practice to practice but, as far as possible, the AECB has attempted to minimize the degree of prescription of regulatory requirements. The traditional modus operandi of the AECB has been to have broad general principles enshrined in regulations with the requirement that licensees submit specific operating policies and procedures to the AECB for approval. In the large nuclear facilities with their sophisticated technical infrastructures, this policy has been largely successful although in a changing legal and political milieu the AECB is finding that a greater degree of proactive regulation is becoming necessary. With the smaller users, the AECB has for a long time found it necessary to have a greater degree of prescription in its regulatory function. Forthcoming General Amendments to the Atomic Energy Control Regulations will, amongst other things, formally incorporate the concept of ALARA into the Canadian regulatory framework. Within the broad range of practices licensed by the AECB it is not practical to provide detailed guidance on optimization that will be relevant and appropriate to all licensees, however the following general principles are proposed.

Preparation of safety and regulatory document for BARC Facilities

International Nuclear Information System (INIS)

Prasad, S.S.; Jayarajan, K.

2017-01-01

In India, the necessary codes and safety guidelines for achieving the safety objectives are provided by the Atomic Energy Regulatory Board (AERB), which are in conformity with the principles of radiation protection as formulated by the International Council of Radiation Protection (ICRP) and International Atomic Energy Agency (IAEA). The same is followed by BARC Safety Council (BSC), which is the regulatory body for the BARC facilities. In addition to all types of fuel cycle facilities, BSC regulates safety of many types of conventional facilities. Many such types of facilities and projects are not under the regulatory purview of AERB. Therefore, the Council has also initiated a programme for development and publication of safety documents for installations in BARC in the fields/ topics yet not addressed by IAEA or AERB. This makes the task pioneering, as some of the areas taken up for defining the regulatory requirements are new, where standard regulatory documents are not available

Regulatory requirements on the design and construction of nuclear power plant control and instrumentation systems in Finland

International Nuclear Information System (INIS)

Heikkila, M.A.

1978-01-01

The Department of Reactor Safety of the Institute of Radiation Protection, being the nuclear regulatory authority in Finland, has set up regulations which govern the design and construction of NPP systems and components. The regulations are partly compiled from existing codes and standards, published primarily in the United States and Federal Republic of Germany, and partly worked out at the Institute. The regulations are collected to a special set of YVL guides (guides for nuclear power plants), and one of these gives requirements on the design and construction of NPPCI systems and components. The scope of the requirements is based on the safety classification of the CI systems and components. Three safety classes have been singled out: the first for CI systems which take part in reactor protection, the second for other directly safety related, and the third for remaining CI systems important enough to deserve supervision. The safety class for CI components is inherited from the system they belong to. The safety classification of IC systems has direct bearing on the initial assumptions of plant accident analysis. The design principles of IC systems are inspected as part of the preliminary and final safety reports. Focus is directed on the principles of redundancy, separation, diversity, testability, etc. The requirements on IC components are directed to different stages of manufacture, installation and operation. The type tests shall be adequate and acceptably documented. The manufacture of components is followed, the test reports reviewed and the efficiency of manufacturers quality assurance program evaluated. Further requirements concern the installation phase and tests at the end of it, and finally guides include directions for maintenance and testing during the operations phase. (author)

Regulatory activities

International Nuclear Information System (INIS)

2001-01-01

This publication, compiled in 8 chapters, presents the regulatory system developed by the Nuclear Regulatory Authority (NRA) of the Argentine Republic. The following activities and developed topics in this document describe: the evolution of the nuclear regulatory activity in Argentina; the Argentine regulatory system; the nuclear regulatory laws and standards; the inspection and safeguards of nuclear facilities; the emergency systems; the environmental systems; the environmental monitoring; the analysis laboratories on physical and biological dosimetry, prenatal irradiation, internal irradiation, radiation measurements, detection techniques on nuclear testing, medical program on radiation protection; the institutional relations with national and international organization; the training courses and meeting; the technical information

On-farm welfare assessment for regulatory purposes: Issues and possible solutions

DEFF Research Database (Denmark)

Sørensen, Jan Tind; Fraser, David

2010-01-01

On-farm welfare assessment has been used mainly for non-regulatory purposes such as producer education or to qualify for voluntary welfare-assurance programs. The application of on-farm assessments in regulatory programs would require four issues to be addressed: (1) selecting criteria...... solution. Issues 3 and 4 (fairness and efficiency) require scientific data on the precision, repeatability, independence, and cost-of-scoring for the various candidate criteria. A process is also needed to bring the scientific information into the deliberative process, either as formal recommendations and...

17 CFR 31.28 - Self-regulatory organization adoption and surveillance of minimum financial, cover, segregation...

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Self-regulatory organization... TRANSACTIONS § 31.28 Self-regulatory organization adoption and surveillance of minimum financial, cover, segregation and sales practice requirements. (a) Each self-regulatory organization must adopt, and submit for...

Performance as a basic regulatory rule

International Nuclear Information System (INIS)

Spano, F.; Rudelli, M.D.; Telleria, D.M.

1998-01-01

In Argentina, the Nuclear Regulatory Authority has been sustained, from beginning by a normative system whose fundamental features are its requirements for performance. The Authority has defined indicators for carrying out the classification of practices as major o minor. (As a function of the complexity of processes and operation, equipment, associate risks and type of consequences, etc.). An example is given base on the requirements of standards related with the practice of gammagraphy in Argentina. From the Authority records we know that the effective dose of operators registered do not exceed 5 mSv per year. The associate risk is lower than 2 10 -4 per year. Risk assessment in scenarios resulting in a potential exposure, taken into account the Argentine standards gives a total risk per year in the order of 10 -4 for workers and 4 10 -5 for members of the public. The contents and requirements of system that sustains the regulatory authority can be prescriptive or just based in performance. A decision in favour of one of them should not only reflect the technical-scientific reality of the country implementing it but also other factors like social and economic issues. (author)

ENVIRONMENTAL SPECIFICATION REQUIREMENTS

International Nuclear Information System (INIS)

TIFFT, S.R.

2003-01-01

Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all SST and DST waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm ESD implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations/Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

Modeling Dynamic Regulatory Processes in Stroke

Science.gov (United States)

McDermott, Jason E.; Jarman, Kenneth; Taylor, Ronald; Lancaster, Mary; Shankaran, Harish; Vartanian, Keri B.; Stevens, Susan L.; Stenzel-Poore, Mary P.; Sanfilippo, Antonio

2012-01-01

The ability to examine the behavior of biological systems in silico has the potential to greatly accelerate the pace of discovery in diseases, such as stroke, where in vivo analysis is time intensive and costly. In this paper we describe an approach for in silico examination of responses of the blood transcriptome to neuroprotective agents and subsequent stroke through the development of dynamic models of the regulatory processes observed in the experimental gene expression data. First, we identified functional gene clusters from these data. Next, we derived ordinary differential equations (ODEs) from the data relating these functional clusters to each other in terms of their regulatory influence on one another. Dynamic models were developed by coupling these ODEs into a model that simulates the expression of regulated functional clusters. By changing the magnitude of gene expression in the initial input state it was possible to assess the behavior of the networks through time under varying conditions since the dynamic model only requires an initial starting state, and does not require measurement of regulatory influences at each time point in order to make accurate predictions. We discuss the implications of our models on neuroprotection in stroke, explore the limitations of the approach, and report that an optimized dynamic model can provide accurate predictions of overall system behavior under several different neuroprotective paradigms. PMID:23071432

Creating a safety culture in the regulatory authority: The Cuban experience

International Nuclear Information System (INIS)

Ferro Fernandez, R.; Guillen Campos, A.

2002-01-01

The Cuban regulatory authority has been working during several years for the fostering and development of a high Safety Culture level in nuclear activities in the country. As starting point to achieve this objective the assessment of the Safety Culture level in the regulatory authority performance was considered an important issue. For this purpose a preliminary diagnosis was carried out by means of a national survey that allowed identifying some areas of the regulatory activity that required improvements in order to achieve a higher Safety Culture and to immediately implement appropriate actions. Two of the most important actions undertaken were: the statement of the regulatory authority Safety Policy which governs and determines the performance of this organization and its staff and also the implementation of a new interaction practice at top level between the regulatory authority and the utilities of the nuclear sector through the Annual Regulatory Conference. The present paper summarizes these two introduced practices into the Cuban regulatory activity. (author)

77 FR 55430 - Arkansas Regulatory Program and Abandoned Mine Land Reclamation Plan

Science.gov (United States)

2012-09-10

... of its regulatory program and abandoned mine land reclamation plan, make grammatical changes, correct... portions of its regulatory program and abandoned mine land reclamation plan, make grammatical changes... Streams. PART 785--REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING 785.13, 785.14, 785.15...

Technical Support Organization Knowledge Management for Nuclear Regulatory Support

International Nuclear Information System (INIS)

Kohut, P.; Ramsey, J.; Katsenelenbogen, S.

2016-01-01

Full text: Knowledge management awareness has increased through the nuclear industrial and regulatory community leading to better understanding of the handling of critical information. Utilizing, managing and regulating the application of nuclear power require an extensive system of expertise and associated research through established organizations. The long term maintenance of the specific expertise is only viable by using scientific knowledge management principles all through the national nuclear infrastructure involving regulatory, industrial, academic and other research institutions. National governments in countries operating or planning to establish nuclear facilities have instituted regulatory regimes on the use of nuclear materials and facilities to insure a high level of operational safety. (author

The regulatory framework for safe decommissioning of nuclear power plants in Korea

International Nuclear Information System (INIS)

Sangmyeon Ahn; Jungjoon Lee; Chanwoo Jeong; Kyungwoo Choi

2013-01-01

We are having 23 units of nuclear power plants in operation and 5 units of nuclear power plants under construction in Korea as of September 2012. However, we don't have any experience on shutdown permanently and decommissioning of nuclear power plants. There are only two research reactors being decommissioned since 1997. It is realized that improvement of the regulatory framework for decommissioning of nuclear facilities has been emphasized constantly from the point of view of IAEA's safety standards. It is also known that IAEA will prepare the safety requirement on decommissioning of facilities; its title is the Safe Decommissioning of Facilities, General Safety Requirement Part 6. According to the result of IAEA's Integrated Regulatory Review Service (IRRS) mission to Korea in 2011, it was recommended that the regulatory framework should require decommissioning plans for nuclear installations to be constructed and operated and these plans should be updated periodically. In addition, after the Fukushima nuclear disaster in Japan in March of 2011, preparedness for early decommissioning caused by an unexpected severe accident became important issues and concerns. In this respect, it is acknowledged that the regulatory framework for decommissioning of nuclear facilities in Korea need to be improved. First of all, we focus on identifying the current status and relevant issues of regulatory framework for decommissioning of nuclear power plants compared to the IAEA's safety standards in order to achieve our goal. And then the plan is established for improvement of regulatory framework for decommissioning of nuclear power plants in Korea. It is expected that if the things will go forward as planned, the revised regulatory framework for decommissioning could enhance the safety regime on the decommissioning of nuclear power plants in Korea in light of international standards. (authors)

Facing regulatory challenges of on-line hemodiafiltration.

Science.gov (United States)

Kümmerle, Wolfgang

2011-01-01

On-line hemodiafiltration (on-line HDF) is the result of a vision that triggered multifarious changes in very different areas. Driven by the idea to offer better medical treatment for renal patients, technological innovations were developed and established that also constituted new challenges in the field of regulatory affairs. The existing regulations predominantly addressed the quality and safety of those products needed to perform dialysis treatment which were supplied by industrial manufacturers. However, the complexity of treatment system required for the provision of on-line fluids demanded a holistic approach encompassing all components involved. Hence, focus was placed not only on single products, but much more on their interfacing, and the clinical infrastructure, in particular, had to undergo substantial changes. The overall understanding of the interaction between such factors, quite different in their nature, was crucial to overcome the arising regulatory obstacles. This essay describes the evolution of the on-line HDF procedure from the regulatory point of view. A simplified diagram demonstrates the path taken from the former regulatory understanding to the realization of necessary changes. That achievement was only possible through 'management of preview' and consequent promotion of technical and medical innovations as well as regulatory re-evaluations. Copyright © 2011 S. Karger AG, Basel.

Regulation of the life cycle of nuclear installations. Peer discussions on regulatory practices

International Nuclear Information System (INIS)

1999-06-01

This report arises from the sixth series of peer discussions on regulatory practices entitled 'Regulation of Life Cycle of Nuclear Installations'. Senior regulators from 18 Member States participated in three peer group discussions during 1997-1998. This report presents the outcome of these meetings and recommendations of good practices identified by senior regulators, which do not necessarily reflect those of the governments of the nominating Member States, the nominating organizations, or the IAEA. The purpose of this report is to disseminate the views which the senior regulators presented at the meetings relating to the policies, principles and requirements imposed by regulatory bodies for the safe management of the life cycle of a nuclear installation. The intention of doing this is to assist Member States in the formulation and enhancement of their regulatory control over PLCM by identifying commonly accepted good practices. This report is structured to cover the subject matter under the following main headings: Policies and Principles for the Life Cycle Management of Nuclear Installations; Responsibilities of the Regulatory Body and the Operating Organization; Requirements and Criteria Imposed by the Regulatory Body; Licensing and Regulatory Assessment for Plant Life Cycle Management; and Good Practices

Development of procedural requirements for life extension of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Hun; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Ham, Cheol Hun [The Catholic University of Korea, Seoul (Korea, Republic of); Chang, Keun Sun [Sunmoon Univ., Asan (Korea, Republic of); Paek, Won Phil [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Cheong, Ji Hwan [Baekseok College Cultural Studies, Cheonan (Korea, Republic of)

2001-03-15

Current status of regulatory aspects of life extension and upgrading of NPPs is reviewed for major foreign countries. Most countries require similar technical requirements; however, procedural aspects differ country by country. Regulatory systems suitable for NPP life extension is investigated. The procedure and requirements for reassessment of design life should be established first; then it can be incorporated into the PSR system. The concept of 'Current Licensing Basis (CLB)' can be adopted in Korea, but further elaboration for terms and definitions is needed for common understanding between interested groups. The procedure for maintenance and backfitting should also be improved. The Systems, Structures, and Components (SSCs) that require development of regulatory requirements for life extension are identified based on extensive analysis of foreign experiences. By analyzing the rules and regulations related to life extension. Basic directions are suggested to harmonize or establish regulatory systems for life extension, two-step licensing, PSR, and backfitting.

Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

Energy Technology Data Exchange (ETDEWEB)

Jorde, K.

1997-12-31

The study was intended to develop a model versatile enough to permit quantification of various water demand scenarios in connection with operation of riverine hydroelectric power plants. Specific emphasis was to be placed on defining the minimum instream flow to be maintained in river segments because of the elementary significance to flowing water biocinoses. Based on fictitious minimum water requirements, various scenarious were simulated for flow regimes depending on power plant operation, so as to establish a system for comparative analysis and evaluation of resulting economic effects on power plant efficiency on the one hand, and the ecologic effects on the aquatic habitat. The information derived was to serve as a basis for decision-making for regulatory purposes. For this study, the temporal and spatial variability of the flow regime at the river bed in a river segment was examined for the first time. Based on this information, complemented by information obtained from habitat simulations, a method was derived for determination of ecologic requirements and their incorporation into regulatory water management provisions. The field measurements were carried out with the FST hemisphere as a proven and most efficient and reliable method of assessing flow regimes at river beds. Evaluation of the measured instream flow data characterising three morphologically different segments of diverted rivers was done with the CASIMIR computer code. The ASS models derived were used for comparative assessment of existing regulatory provisions and recommended amendments determining required minimum instream flow in diverted rivers. The requirements were defined taking as a basis data obtained for three different years. (orig./CB) [Deutsch] Ziel der Arbeit war die Entwicklung eines Modellverfahrens, das flexibel die Quantifizierung unterschiedlicher Nutzansprueche an Laufwasserkraftanlagen ermoeglicht. Insbesondere der Erhalt einer gewissen Dynamik, die fuer

Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

Energy Technology Data Exchange (ETDEWEB)

Jorde, K

1998-12-31

The study was intended to develop a model versatile enough to permit quantification of various water demand scenarios in connection with operation of riverine hydroelectric power plants. Specific emphasis was to be placed on defining the minimum instream flow to be maintained in river segments because of the elementary significance to flowing water biocinoses. Based on fictitious minimum water requirements, various scenarious were simulated for flow regimes depending on power plant operation, so as to establish a system for comparative analysis and evaluation of resulting economic effects on power plant efficiency on the one hand, and the ecologic effects on the aquatic habitat. The information derived was to serve as a basis for decision-making for regulatory purposes. For this study, the temporal and spatial variability of the flow regime at the river bed in a river segment was examined for the first time. Based on this information, complemented by information obtained from habitat simulations, a method was derived for determination of ecologic requirements and their incorporation into regulatory water management provisions. The field measurements were carried out with the FST hemisphere as a proven and most efficient and reliable method of assessing flow regimes at river beds. Evaluation of the measured instream flow data characterising three morphologically different segments of diverted rivers was done with the CASIMIR computer code. The ASS models derived were used for comparative assessment of existing regulatory provisions and recommended amendments determining required minimum instream flow in diverted rivers. The requirements were defined taking as a basis data obtained for three different years. (orig./CB) [Deutsch] Ziel der Arbeit war die Entwicklung eines Modellverfahrens, das flexibel die Quantifizierung unterschiedlicher Nutzansprueche an Laufwasserkraftanlagen ermoeglicht. Insbesondere der Erhalt einer gewissen Dynamik, die fuer

Nuclear regulatory communication with the public: 10 years of progress

International Nuclear Information System (INIS)

Gauvain, J.; Jorle, A.; Chanial, L.

2008-01-01

The NEA has an acknowledged role to assist its member countries in maintaining and developing, through international co-operation, the scientific, technological and legal bases required for a safe, environmentally friendly and economical use of nuclear energy. In this context, the NEA Committee on Nuclear Regulatory Activities (CNRA) provides a forum for senior representatives from nuclear regulatory bodies to exchange information and experience on nuclear regulatory policies and practices in NEA member countries and to review developments which could affect regulatory requirements. Public confidence in government and in risk management structures is important to all developed countries with an open society. The use of nuclear power in a democracy is built upon a certain trust in the political system and the national authorities. To foster and maintain such trust in a period of greater public scrutiny of nuclear activities, a number of nuclear regulatory organisations (NROs) initiated various processes to pro-actively inform the public about their supervision and control of nuclear activities, or when appropriate to involve the public in decision making. In 1998 the question was raised within the CNRA of whether public trust in the regulator might be very different from one country to another, and an activity was started among member countries to exchange experience and best practices and to learn lessons about NRO communication with their publics. Three workshops were organised by the NEA, and a Working Group on Public Communication of Nuclear Regulatory Organisations was set up in 2001. The activities and findings are summarised below. (author)

Design requirements for new nuclear reactor facilities in Canada

International Nuclear Information System (INIS)

Shim, S.; Ohn, M.; Harwood, C.

2012-01-01

The Canadian Nuclear Safety Commission (CNSC) has been establishing the regulatory framework for the efficient and effective licensing of new nuclear reactor facilities. This regulatory framework includes the documentation of the requirements for the design and safety analysis of new nuclear reactor facilities, regardless of size. For this purpose, the CNSC has published the design and safety analysis requirements in the following two sets of regulatory documents: 1. RD-337, Design of New Nuclear Power Plants and RD-310, Safety Analysis for Nuclear Power Plants; and 2. RD-367, Design of Small Reactor Facilities and RD-308, Deterministic Safety Analysis for Small Reactor Facilities. These regulatory documents have been modernized to document past practices and experience and to be consistent with national and international standards. These regulatory documents provide the requirements for the design and safety analysis at a high level presented in a hierarchical structure. These documents were developed in a technology neutral approach so that they can be applicable for a wide variety of water cooled reactor facilities. This paper highlights two particular aspects of these regulatory documents: The use of a graded approach to make the documents applicable for a wide variety of nuclear reactor facilities including nuclear power plants (NPPs) and small reactor facilities; and, Design requirements that are new and different from past Canadian practices. Finally, this paper presents some of the proposed changes in RD-337 to implement specific details of the recommendations of the CNSC Fukushima Task Force Report. Major changes were not needed as the 2008 version of RD-337 already contained requirements to address most of the lessons learned from the Fukushima event of March 2011. (author)

Upgrading nuclear regulatory infrastructure in Armenia

International Nuclear Information System (INIS)

Martirosyan, A.; Amirjanyan, A.; Kacenelenbogen, S.

2010-01-01

Armenia is contemplating an upgrade to its national power generation capacity to meet replacement and future energy needs. Unit 2 of ANPP is scheduled for shutdown after replacement power generation capacities are in place. A recent alternative energy study indicates viability of the nuclear option to replace this capacity. Some technology-specific proposals are being considered by the Ministry of Energy of Armenia. It is likely that the reactor technology decision will be made in the not too distant future. The existing reactor continues to be operated in the regulatory framework developed in the Soviet Union and adopted in Armenia. Given the interest in the new reactor, Armenia launched a project to review the existing system of regulation and to bring it into harmony with modern practice in preparation for the new reactor project development. The new regulatory framework will be needed as a basis for any potential tendering process. The US NRC and ANRA have agreed to perform a review and update nuclear legislation and the system of regulation in this area. The first step in this process was to develop an action plan for such program. The action plan describes the overall strategy of ANRA to modify existing or develop new processes and requirements, identifies the major Laws that need to be reviewed given practical legal considerations to construct and operate the reactor and Armenia's international obligations under various conventions. This work included review of existing models of regulation in different countries with 'small' nuclear program, including IAEA recommendations as well as existing legislation in Armenia in this area and development of a strategy for the regulatory model development. In addition, the plan to develop requirements for ANRA staffing and training needs to meet its regulatory obligations under the new reactor development process was developed

Steam Generator tube integrity -- US Nuclear Regulatory Commission perspective

International Nuclear Information System (INIS)

Murphy, E.L.; Sullivan, E.J.

1997-01-01

In the US, the current regulatory framework was developed in the 1970s when general wall thinning was the dominant degradation mechanism; and, as a result of changes in the forms of degradation being observed and improvements in inspection and tube repair technology, the regulatory framework needs to be updated. Operating experience indicates that the current U.S. requirements should be more stringent in some areas, while in other areas they are overly conservative. To date, this situation has been dealt with on a plant-specific basis in the US. However, the NRC staff is now developing a proposed steam generator rule as a generic framework for ensuring that the steam generator tubes are capable of performing their intended safety functions. This paper discusses the current U.S. regulatory framework for assuring steam generator (SG) tube integrity, the need to update this regulatory framework, the objectives of the new proposed rule, the US Nuclear Regulatory Commission (NRC) regulatory guide (RG) that will accompany the rule, how risk considerations affect the development of the new rule, and some outstanding issues relating to the rule that the NRC is still dealing with

European regulatory tools for advanced therapy medicinal products.

Science.gov (United States)

Flory, Egbert; Reinhardt, Jens

2013-12-01

Increasing scientific knowledge and technical innovations in the areas of cell biology, biotechnology and medicine resulted in the development of promising therapeutic approaches for the prevention and treatment of human diseases. Advanced therapy medicinal products (ATMPs) reflect a complex and innovative class of biopharmaceuticals as these products are highly research-driven, characterised by innovative manufacturing processes and heterogeneous with regard to their origin, type and complexity. This class of ATMP integrates gene therapy medicinal products, somatic cell therapy medicinal products and tissue engineering products and are often individualized and patient-specific products. Multiple challenges arise from the nature of ATMPs, which are often developed by micro, small and medium sized enterprises, university and academia, for whom regulatory experiences are limited and regulatory requirements are challenging. Regulatory guidance such as the reflection paper on classification of ATMPs and guidelines highlighting product-specific issues support academic research groups and pharmaceutical companies to foster the development of safe and effective ATMPs. This review provides an overview on the European regulatory aspects of ATMPs and highlights specific regulatory tools such as the ATMP classification procedure, a discussion on the hospital exemption for selected ATMPs as well as borderline issues towards transplants/transfusion products.

Politically Induced Regulatory Risk and Independent Regulatory Agencies

OpenAIRE

Strausz, Roland

2015-01-01

Uncertainty in election outcomes generates politically induced regulatory risk. Political parties' risk attitudes towards such risk depend on a fluctuation effect that hurts both parties and an output--expansion effect that benefits at least one party. Notwithstanding the parties' risk attitudes, political parties have incentives to negotiate away all regulatory risk by pre-electoral bargaining. Efficient pre-electoral bargaining outcomes fully eliminate politically induced regulatory risk. P...

Regulatory analysis for final rule on nuclear power plant license renewal

International Nuclear Information System (INIS)

1991-12-01

This regulatory analysis provides the supporting information for the final rule (10 CFR Part 54) that defines the Nuclear Regulatory Commission's requirements for renewing the operating licenses of commercial nuclear power plants. A set of four specific alternatives for the safety review of license renewal applications is defined and evaluated. These are: Alternative A-current licensing basis; Alternative B-extension of Alternative A to require assessment and managing of aging; Alternative C -- extension of Alternative B to require assessment of design differences against selected new-plant standards using probabilistic risk assessment; and Alternative D -- extension of Alternative B to require compliance with all new-plant standards. A quantitative comparison of the four alternatives in terms of impact-to-value ratio is presented, and Alternative B is the most cost-beneficial safety review alternative

Regulatory aspects of fusion power-lessons from fission plants

International Nuclear Information System (INIS)

Natalizio, A.; Brunnader, H.; Sood, S.K.

1993-01-01

Experience from fission reactors has shown the regulatory process for licensing a nuclear facility to be legalistic, lengthy, unpredictable, and costly. This experience also indicates that much of the regulatory debate is focused on safety margins, that is, the smaller the safety margins the bigger the regulatory debate and the greater the amount of proof required to satisfy the regulatory. Such experience suggests that caution and prudence guide the development of a regulatory regime for fusion reactors. Fusion has intrinsic safety and environmental advantages over fission, which should alleviate significantly, or even eliminate, the regulatory problems associated with fission. The absence of a criticality concern and the absence of fission products preclude a Chernobyl type accident from occurring in a fusion reactor. Although in a fusion reactor there are large inventories of radioactive products that can be mobilized, the total quantity is orders of magnitude smaller than in fission power reactors. The bulk of the radioactivity in a fusion reactor is either activation products in steel structures, or tritium fuel supplies safely stored in the form of a metal tritide in storage beds. The quantity of tritium that can be mobilized under accident conditions is much less than ten million curies. This compares very favorably with a fission product inventory greater than ten billion curies in a fission power reactor. Furthermore, in a fission reactor, all of the reactivity is contained in a steel vessel that is pressurized to about 150 atmospheres, whereas in a fusion reactor, the inventory of radioactive material is dispersed in different areas of the plant, such that it is improbable that a single event could give rise to the release of the entire inventory to the environment. With such significant intrinsic safety advantages there is no a priori need to make fusion requirements/regulations more demanding and more stringent than fission

Regulatory control of the use of contractors by operating organizations. Peer discussions on regulatory practices

International Nuclear Information System (INIS)

2000-09-01

This report arises from the eighth series of peer discussions on regulatory practices entitled 'Regulatory control of the use of contractors by operating organizations'. Senior regulators from 19 Member States participated in two peer group discussions in March 2000 and May 2000. This report gives an account of the outcomes of these meetings and of practical suggestions put forward by senior regulators. These suggestions do not necessarily reflect the views of the governments of the nominating Member States, the organizations they belong to, or the International Atomic Energy Agency. The objective of this document is to share experience between regulatory bodies and provide practical suggestions for controlling the use of contractors and subcontractors by the operating organizations during all stages, especially operation, of a nuclear power plant, so as to ensure that the quality of work and services delivered is commensurate with the safety importance of the activities and that these are carried out in a manner that will not adversely affect the safe or reliable operation of the facility. These documented practical suggestions and experiences are the result of a series of peer discussions at the IAEA in 2000. It is considered that the manner in which control is exercised, and the various challenges connected to this control, are highly dependent upon the legislative framework, maturity of the nuclear programme, the size of the national nuclear industry and the culture in each country. The report is structured so that it covers the subject matter under the following main headings: Legal Provisions, Regulatory Strategy and Requirements; Regulatory Approaches for Controlling the Use of Contractors; Types of Contracts; Practical Suggestions

78 FR 47015 - Software Requirement Specifications for Digital Computer Software Used in Safety Systems of...

Science.gov (United States)

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Requirement Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission... issuing a revised regulatory guide (RG), revision 1 of RG 1.172, ``Software Requirement Specifications for...

77 FR 7968 - Semiannual Regulatory Agenda

Science.gov (United States)

2012-02-13

... Regulation Sequence No. Title Identifier No. 392 Non-Federal Oil and Gas 1024-AD78 Rights. National Park.... Timetable: Action Date FR Cite NPRM 07/00/12 Regulatory Flexibility Analysis Required: Yes. Agency Contact... anaconda, and Beni anaconda. Timetable: Action Date FR Cite ANPRM 01/31/08 73 FR 5784 ANPRM Comment Period...

Using Inequality Measures to Incorporate Environmental Justice into Regulatory Analyses

Science.gov (United States)

Harper, Sam; Ruder, Eric; Roman, Henry A.; Geggel, Amelia; Nweke, Onyemaechi; Payne-Sturges, Devon; Levy, Jonathan I.

2013-01-01

Formally evaluating how specific policy measures influence environmental justice is challenging, especially in the context of regulatory analyses in which quantitative comparisons are the norm. However, there is a large literature on developing and applying quantitative measures of health inequality in other settings, and these measures may be applicable to environmental regulatory analyses. In this paper, we provide information to assist policy decision makers in determining the viability of using measures of health inequality in the context of environmental regulatory analyses. We conclude that quantification of the distribution of inequalities in health outcomes across social groups of concern, considering both within-group and between-group comparisons, would be consistent with both the structure of regulatory analysis and the core definition of environmental justice. Appropriate application of inequality indicators requires thorough characterization of the baseline distribution of exposures and risks, leveraging data generally available within regulatory analyses. Multiple inequality indicators may be applicable to regulatory analyses, and the choice among indicators should be based on explicit value judgments regarding the dimensions of environmental justice of greatest interest. PMID:23999551

Electricity and telecommunications regulatory institutions in small and developing countries

Energy Technology Data Exchange (ETDEWEB)

Stern, J. [London Business School, London (United Kingdom)

2000-09-01

The spread of utility liberalisation and privatisation to middle and low income developing countries raises the problem of whether and how they can establish an effective regulatory capability of whether the supply of regulatory services is likely to be insufficient. The paper presents evidence on the size of electricity regulatory agencies in 24 mainly middle and lower income countries as well as the number of high-level, specialist regulatory staff and the potential resource pool from post-school education. The paper also discusses how far the problem can be alleviated and/or avoided by the use of regulation by contract, regulation by multi-national regulatory agency or contracting-out. The paper concludes that such solutions are unlikely to be generally effective but that informal exchanges of information and pooling of resources between national regulators on a market-driven basis, as seen in Southern Africa and the EU, is a promising option. The paper concludes by pointing to the need to ascertain the minimum required regulatory capability in developing countries as perceived by Governments and potential investors. (author)

ENVIRONMENTAL SPECIFICATION REQUIREMENTS

International Nuclear Information System (INIS)

TIFFT, S.R.

2003-01-01

Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all single-shell tank (SST) and double-shell tank (DST) waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm Environmental Specifications Document (ESD) implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

Sucrose-induced anthocyanin accumulation in vegetative tissue of Petunia plants requires anthocyanin regulatory transcription factors.

Science.gov (United States)

Ai, Trinh Ngoc; Naing, Aung Htay; Arun, Muthukrishnan; Lim, Sun-Hyung; Kim, Chang Kil

2016-11-01

The effects of three different sucrose concentrations on plant growth and anthocyanin accumulation were examined in non-transgenic (NT) and transgenic (T 2 ) specimens of the Petunia hybrida cultivar 'Mirage rose' that carried the anthocyanin regulatory transcription factors B-Peru+mPAP1 or RsMYB1. Anthocyanin accumulation was not observed in NT plants in any treatments, whereas a range of anthocyanin accumulation was observed in transgenic plants. The anthocyanin content detected in transgenic plants expressing the anthocyanin regulatory transcription factors (B-Peru+mPAP1 or RsMYB1) was higher than that in NT plants. In addition, increasing sucrose concentration strongly enhanced anthocyanin content as shown by quantitative real-time polymerase chain reaction (qRT-PCR) analysis, wherein increased concentrations of sucrose enhanced transcript levels of the transcription factors that are responsible for the induction of biosynthetic genes involved in anthocyanin synthesis; this pattern was not observed in NT plants. In addition, sucrose affected plant growth, although the effects were different between NT and transgenic plants. Taken together, the application of sucrose could enhance anthocyanin production in vegetative tissue of transgenic Petunia carrying anthocyanin regulatory transcription factors, and this study provides insights about interactive effects of sucrose and transcription factors in anthocyanin biosynthesis in the transgenic plant. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Regulatory aspects for nuclear and radiation applications

International Nuclear Information System (INIS)

Duraisamy, S.

2014-01-01

The Atomic Energy Regulatory Board (AERB) is the national authority for ensuring that the use of ionizing radiation and nuclear energy does not cause any undue risk to the health of workers, members of the public and to the environment. AERB was constituted on November 15, 1983 and derives its regulatory power from the rules and notifications promulgated under the Atomic Energy Act, 1962 and the Environment (Protection) Act, 1986. AERB is provided with the necessary powers and mandate to frame safety policies, lay down safety standards and requirements for monitoring and enforcing the safety provisions. AERB follows multi-tier system for its review and assessment, safety monitoring, surveillance and enforcement. While regulating various nuclear and radiation facilities, AERB adopts a graded approach taking into account the hazard potential associated with the facilities being regulated. The regulatory process has been continuous evolving to cater to the new developments in reactor and radiation technologies. The regulatory effectiveness and efficiency of AERB have grown over the last three decades to make it into a robust organization. The radiation protection infrastructure in the country is on a sound footing and is constantly being strengthened based on experience and continued research and development. As one of its mandates AERB prescribes radiation dose limits for the occupational workers and the public, in line with the IAEA Safety Standard and ICRP recommendations. The current dose limits and the radiation safety requirements are more stringent than past. To meet the current safety standards, it is important for the facilities to have state of art radiation monitoring system and programme in place. While recognizing the current system in place, this presentation also highlights certain key radiation protection challenges associated with the implementation of radiation protection standards in the nuclear and radiation facilities especially in the areas of

The Safety Culture of an Effective Nuclear Regulatory Body

International Nuclear Information System (INIS)

Carlsson, Lennart; Bernard, Benoit; Lojk, Robert; Koskinen, Kaisa; Rigail, Anne-Cecile; Stoppa, Gisela; Lorand, Ferenc; Aoki, Masahiro; Fujita, Kenichi; Takada, Hiroko; Kurasaki, Takaaki; Choi, Young Sung; Smit, Martin; Bogdanova, Tatiana; Sapozhnikov, Alexander; Smetnik, Alexander; Cid Campo, Rafael; Axelsson, Lars; Carlsson, Lennart; Edland, Anne; Ryser, Cornelia; Cohen, Miriam; Ficks, Ben; Valentin, Andrea; Nicic, Adriana; Lorin, Aurelie; Nezuka, Takayoshi; Creswell, Len

2016-01-01

The fundamental objective of all nuclear safety regulatory bodies is to ensure that activities related to the peaceful use of nuclear energy are carried out in a safe manner within their respective countries. In order to effectively achieve this objective, the nuclear regulatory body requires specific characteristics, one of which is a healthy safety culture. This regulatory guidance report describes five principles that support the safety culture of an effective nuclear regulatory body. These principles concern leadership for safety, individual responsibility and accountability, co-operation and open communication, a holistic approach, and continuous improvement, learning and self-assessment. The report also addresses some of the challenges to a regulatory body's safety culture that must be recognised, understood and overcome. It provides a unique resource to countries with existing, mature regulators and can be used for benchmarking as well as for training and developing staff. It will also be useful for new entrant countries in the process of developing and maintaining an effective nuclear safety regulator. (authors)

Evolution of cichlid vision via trans-regulatory divergence

Directory of Open Access Journals (Sweden)

O’Quin Kelly E

2012-12-01

Full Text Available Abstract Background Phenotypic evolution may occur through mutations that affect either the structure or expression of protein-coding genes. Although the evolution of color vision has historically been attributed to structural mutations within the opsin genes, recent research has shown that opsin regulatory mutations can also tune photoreceptor sensitivity and color vision. Visual sensitivity in African cichlid fishes varies as a result of the differential expression of seven opsin genes. We crossed cichlid species that express different opsin gene sets and scanned their genome for expression Quantitative Trait Loci (eQTL responsible for these differences. Our results shed light on the role that different structural, cis-, and trans-regulatory mutations play in the evolution of color vision. Results We identified 11 eQTL that contribute to the divergent expression of five opsin genes. On three linkage groups, several eQTL formed regulatory “hotspots” associated with the expression of multiple opsins. Importantly, however, the majority of the eQTL we identified (8/11 or 73% occur on linkage groups located trans to the opsin genes, suggesting that cichlid color vision has evolved primarily via trans-regulatory divergence. By modeling the impact of just two of these trans-regulatory eQTL, we show that opsin regulatory mutations can alter cichlid photoreceptor sensitivity and color vision at least as much as opsin structural mutations can. Conclusions Combined with previous work, we demonstrate that the evolution of cichlid color vision results from the interplay of structural, cis-, and especially trans-regulatory loci. Although there are numerous examples of structural and cis-regulatory mutations that contribute to phenotypic evolution, our results suggest that trans-regulatory mutations could contribute to phenotypic divergence more commonly than previously expected, especially in systems like color vision, where compensatory changes in the

Innovative approach to training radiation safety regulatory professionals

International Nuclear Information System (INIS)

Gilley, Debbie Bray

2008-01-01

Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)

Application of omics data in regulatory toxicology: report of an international BfR expert workshop.

Science.gov (United States)

Marx-Stoelting, P; Braeuning, A; Buhrke, T; Lampen, A; Niemann, L; Oelgeschlaeger, M; Rieke, S; Schmidt, F; Heise, T; Pfeil, R; Solecki, R

2015-11-01

Advances in omics techniques and molecular toxicology are necessary to provide new perspectives for regulatory toxicology. By the application of modern molecular techniques, more mechanistic information should be gained to support standard toxicity studies and to contribute to a reduction and refinement of animal experiments required for certain regulatory purposes. The relevance and applicability of data obtained by omics methods to regulatory purposes such as grouping of chemicals, mode of action analysis or classification and labelling needs further improvement, defined validation and cautious expert judgment. Based on the results of an international expert workshop organized 2014 by the Federal Institute for Risk Assessment in Berlin, this paper is aimed to provide a critical overview of the regulatory relevance and reliability of omics methods, basic requirements on data quality and validation, as well as regulatory criteria to decide which effects observed by omics methods should be considered adverse or non-adverse. As a way forward, it was concluded that the inclusion of omics data can facilitate a more flexible approach for regulatory risk assessment and may help to reduce or refine animal testing.

Regulatory experience with ALARP investigation reports at some UK nuclear sites

International Nuclear Information System (INIS)

Robinson, I.F.; Turton, D.

1991-01-01

This paper describes the UK regulatory requirements placed on employers regarding the investigation of whether doses incurred are as low as reasonably practicable. It discusses the operational experience gained by an inspection Branch of the HM Nuclear Installations Inspectorate (NII) of the Health and Safety Executive which is the UK regulatory body responsible for the enforcement of these requirements. The general approach taken by employers to preparing investigation reports is discussed, and the form and content of the reports is considered. An aspect of the employers approach to dose restriction is discussed, and the NII's response to investigation reports is described. (Author)

Patient Preferences in Regulatory Benefit-Risk Assessments: A US Perspective.

Science.gov (United States)

Johnson, F Reed; Zhou, Mo

Demands for greater transparency in US regulatory assessments of benefits and risks, together with growing interest in engaging patients in Food and Drug Administration regulatory decision making, have resulted in several recent regulatory developments. Although Food and Drug Administration's Center for Drug Evaluation and Research (CDER) and Center for Devices and Radiological Health (CDRH) have established patient-engagement initiatives, CDRH has proposed guidelines for considering quantitative data on patients' benefit-risk perspectives, while CDER has focused on a more qualitative approach. We summarize two significant studies that were developed in collaboration and consultation with CDER and CDRH. CDER encouraged a patient advocacy group to propose draft guidance on engaging patient and caregiver stakeholders in regulatory decision making for Duchenne muscular dystrophy. CDRH sponsored a discrete-choice experiment case study to quantify obese respondents' perspectives on "meaningful benefits." CDRH and CDER issued draft guidance in May and June 2015, respectively, on including patient-preference data in regulatory submissions. Both organizations face challenges. CDER is working on integrating qualitative data into existing evidence-based review processes and is exploring options for therapeutic areas not included on a priority list. CDRH has adopted an approach that requires patient-preference data to satisfy standards of valid scientific evidence. Although that strategy could facilitate integrating patient perspectives directly with clinical data on benefits and harms, generating such data requires building capacity. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The nuclear regulatory process in Canada experience and possible future direction

International Nuclear Information System (INIS)

Sainsbury, J.D.

1987-01-01

The underlying principle in the Canadian licensing process is that the licensee (owner/operatopr) bears the responsibility for safety while the regulatory authority sets safety objectives and audits their achievement. As a consequence, Canadian Regulatory Requirements emphasize numerical safety goals, and minimize specific design or operational rules. This paper traces the evolution of this approach, and indicates direction for the future. (author)

A study on the regulatory approach of major technical issues

Energy Technology Data Exchange (ETDEWEB)

Chang, Keun Sun; Oh, S. H.; Kang, H. J.; Kim, G. S. [Sunmoon Univ., Asan (Korea, Republic of); Lee, S. H.; Baek, W. P.; Yang, S. H.; Jeong, Y. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

1999-02-15

This project is to provide the regulatory direction of 4 major technical issues for the Korean Next Generation Reactors, which are parts of major technical issues resulted from the safety regulation R and D on the KNGR. The outstanding results are are as follows : related to the classification and acceptance criteria of plant conditions, currently used classification and safety requirement were reviewed and regulatory direction was proposed. Among multiple failures, it is identified that SBO, TLOFW, multiple SGTR and ATWS are basically to be considered for additional requirements for advanced reactors. This study reviewed risk aspects, design consideration, and trends of safety requirements, and proposed fundamental safety requirements to be applied for KNGR. Multiple steam generator tube failure is a significant safety concern because of the possibility of release of radionuclides to the environment through containment bypass. Proposed safety requirement for this event can be categorized mainly as analysis requirement, design evaluation requirement and PSA requirement; For protection of containment failure, a reasonable safety position is necessary through and integrated review of possibility of severe accident occurrence, effects of sever accident mitigation features and cost effects of these design features. With this consideration safety requirements developed are the analysis requirement, provision of protective measures and survivability/availability of protective measures.

Immobilization of defense high-level waste: an assessment of technological strategies and potential regulatory goals. Volume I

International Nuclear Information System (INIS)

1979-06-01

An investigation was made of the high-level radioactive waste immobilization technology programs in the U.S. and Europe, and of the associated regulatory programs and waste management perspectives in the countries studied. Purpose was to assess the ability of those programs to satisfy DOE waste management needs and U.S. regulatory requirements. This volume includes: introduction, immobilization strategies in the context of waste isolation program needs, high-level waste management as an integrated system, regulatory goals, engineered-barrier characteristics, barrier technology, high-level waste disposal programs, analysis of HLW immobilization technology in the context of policy and regulatory requirements, and waste immobilization program option

Handbook for value-impact assessments of NRC regulatory actions

International Nuclear Information System (INIS)

Mullen, M.F.; DiPalo, A.J.

1985-01-01

According to current Nuclear Regulatory Commission (NRC) procedures, value-impact (cost-benefit) assessments must be prepared for all rulemaking actions and for a broad range of other regulatory requirements and guidance. Probabilistic risk assessment (PRA) methods furnish an important part of the information base for these assessments. PRA methods are frequently the principal quantitative tool for estimating the benefits (e.g., public risk reduction) of proposed regulatory actions. In December 1983, the NRC published A Handbook for Value-Impact Assessment, NUREG/CR-3568, which provides a set of systematic procedures for performing value-impact assessments. The Handbook contains methods, data, and sources of information that can assist the regulatory analyst in conducting such assessments. The use of probabilistic risk analysis to estimate the benefits of proposed regulatory actions is described. Procedures and methods are also given for evaluating the costs and other consequences associated with regulatory actions. The Handbook has been adopted by the NRC as the recommended guideline for value impact assessments. This paper presents the background, objectives, and scope of the Handbook, describes the value-impact assessment methods (including the use of probabilistic risk assessment to estimate benefits), and discusses a selection of current and planned applications, with examples to illustrate how the methods are used

Establishing a regulatory value chain model: An innovative approach to strengthening medicines regulatory systems in resource-constrained settings.

Science.gov (United States)

Chahal, Harinder Singh; Kashfipour, Farrah; Susko, Matt; Feachem, Neelam Sekhri; Boyle, Colin

2016-05-01

Medicines Regulatory Authorities (MRAs) are an essential part of national health systems and are charged with protecting and promoting public health through regulation of medicines. However, MRAs in resource-constrained settings often struggle to provide effective oversight of market entry and use of health commodities. This paper proposes a regulatory value chain model (RVCM) that policymakers and regulators can use as a conceptual framework to guide investments aimed at strengthening regulatory systems. The RVCM incorporates nine core functions of MRAs into five modules: (i) clear guidelines and requirements; (ii) control of clinical trials; (iii) market authorization of medical products; (iv) pre-market quality control; and (v) post-market activities. Application of the RVCM allows national stakeholders to identify and prioritize investments according to where they can add the most value to the regulatory process. Depending on the economy, capacity, and needs of a country, some functions can be elevated to a regional or supranational level, while others can be maintained at the national level. In contrast to a "one size fits all" approach to regulation in which each country manages the full regulatory process at the national level, the RVCM encourages leveraging the expertise and capabilities of other MRAs where shared processes strengthen regulation. This value chain approach provides a framework for policymakers to maximize investment impact while striving to reach the goal of safe, affordable, and rapidly accessible medicines for all.

75 FR 15475 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing of Proposed Minor Rule...

Science.gov (United States)

2010-03-29

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-61752; File No. 4-594] Self-Regulatory... Rule 19d-1(c)(1) of the Act \\3\\ requiring that a self- regulatory organization promptly file notice... Commission adopted amendments to paragraph (c) of Rule 19d-1 to allow self-regulatory organizations (``SROs...

75 FR 15471 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing of Proposed Minor Rule...

Science.gov (United States)

2010-03-29

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-61753; File No. 4-595] Self-Regulatory... Rule 19d-1(c)(1) of the Act \\3\\ requiring that a self- regulatory organization promptly file notice... Commission adopted amendments to paragraph (c) of Rule 19d-1 to allow self-regulatory organizations (``SROs...

An electronic regulatory document management system for a clinical trial network.

Science.gov (United States)

Zhao, Wenle; Durkalski, Valerie; Pauls, Keith; Dillon, Catherine; Kim, Jaemyung; Kolk, Deneil; Silbergleit, Robert; Stevenson, Valerie; Palesch, Yuko

2010-01-01

A computerized regulatory document management system has been developed as a module in a comprehensive Clinical Trial Management System (CTMS) designed for an NIH-funded clinical trial network in order to more efficiently manage and track regulatory compliance. Within the network, several institutions and investigators are involved in multiple trials, and each trial has regulatory document requirements. Some of these documents are trial specific while others apply across multiple trials. The latter causes a possible redundancy in document collection and management. To address these and other related challenges, a central regulatory document management system was designed. This manuscript shares the design of the system as well as examples of it use in current studies. Copyright (c) 2009 Elsevier Inc. All rights reserved.

A study on the regulatory approach of major technical issues

Energy Technology Data Exchange (ETDEWEB)

Chang, Keun Sun; Choi, J. T.; Kim, I. J. [Sunmoon Univ., Asan (Korea, Republic of); Lee, S. H.; Baek, W. P.; Yang, S. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

1998-06-15

This project is to provide the regulatory direction of 4 major technical issues for the Korean Next Generation Reactors, which are parts of major technical issues resulted from the safety regulation R and D on the KNGR. The outstanding results are as follows : reliability of risk significant SSCs established during design stage must be maintained through the operating life of the plant, currently used classification method of plant conditions and safety requirement were reviewed, and a quantitative classification method is needed to be developed further, the basic regulatory directions are proposed for multiple failures such as SBO, TLOFW, multiple SGTR and ATWS, safety requirements are proposed for survivability/availability of severe accident mitigation design features by 5 items if basic requirements, selection of initial event, identification of available equipment and instruments, identification of environmental conditions and verification methods.

Strengthening Regulatory Competence in a Changing Nuclear Regulatory Environment

International Nuclear Information System (INIS)

Illizastigui, P.F.

2016-01-01

The paper addresses the approach followed by the Cuban National Center for Nuclear Safety for the management of current and new competences of its regulatory staff with the aim of allowing those staff to effectively fulfill their core regulatory functions. The approach is realized through an Integrated System for Competence Building, which is based on the IAEA recommendations, shown to be effective in ensuring the necessary competence in the relevant areas. In the author’s opinion, competence of the regulatory staff in the area of human and organizational factors is of paramount importance and needs to be further strengthened in order to be able to assess safety performance at the facilities and detect early signs of deteriorating safety performance. The former is defined by the author as the core regulatory function “Analysis” which covers the entire spectrum of assessment tasks carried out by the regulatory staff to: a) detect declining safety performance, b) diagnose latent weaknesses (root causes) and c) make effective safety culture interventions. The author suggests that competence associated with the fulfillment of the analysis function is distinctly identified and dealt with separately in the current system of managing regulatory competence. (author)

Novel excipients - Regulatory challenges and perspectives - The EU insight.

Science.gov (United States)

Kozarewicz, Piotr; Loftsson, Thorsteinn

2018-05-21

Novel excipients are indispensable in development of modern, advanced drug delivery systems and biotechnology-derived drugs. Although numerous novel excipients are developed for pharmaceutical use, they are not frequently seen in medicinal products due to the strict regulatory requirements and perception that their use makes new product evaluation more complex with risk of delays in the approval process. Regulators regard novel excipients as new substances and whenever new excipient is used in a formulation it must be subjected to full evaluation, similarly to the one required for new active substance. Consequently, the amount of information required in support of the regulatory approval (i.e. marketing authorization) is much more complex and comprehensive than for established excipients. This short review provides an insight into the use of novel excipients in medicinal products approved in the European Union. In addition, barriers and challenges in development of novel excipients are being discussed as well as means to overcome those barriers. Copyright © 2018 Elsevier B.V. All rights reserved.

Implementation of the waste management transfer act. Requirements from a regulatory point of view

International Nuclear Information System (INIS)

Mueller-Dehn, Christian

2017-01-01

In future in Germany, the state will be responsible for financing and handling the interim and final storage of radioactive waste from nuclear power plants. With regard to interim storage, this objective is achieved with the provisions of the Waste Management Transfer Act. Regulatory implementation is based on these regulations. BGZ Gesellschaft fuer Zwischenlager mbH is responsible for interim storage on behalf of the Federal Government. Simultaneously with the transfer of interim storage facilities to BGZ a legal transfer of approval is carried out. Insofar as there is a technical, organisational or personnel conjunction with the nuclear power plant operation, which continues to exist beyond this deadline and is relevant for regulatory purposes, a regulation is made via a service contract with the BGZ. This ensures compliance with the licensing regulations. Irradiated fuel assemblies and the waste from reprocessing can be handed over to BGZ from 1 January 2019 onwards and waste with negligible heat generation can be disposed of as of the determination of their proper packaging.

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

International Nuclear Information System (INIS)

Dey, M.

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission's Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Dey, M. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Safety Issue Resolution; Arsenault, F.; Patterson, M.; Gaal, M. [SCIENTECH, Inc., Rockville, MD (United States)

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission`s Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements.

78 FR 44193 - Introduction to the Unified Agenda of Federal Regulatory and Deregulatory Actions

Science.gov (United States)

2013-07-23

... the United States Federal Mediation and Conciliation Service Financial Stability Oversight Council... Flexibility Analysis, actions selected for periodic review under section 610(c) of the Regulatory Flexibility... know what action it will take next. Regulatory Flexibility Analysis Required--whether an analysis is...

Regulatory aspects of nuclear reactor decommissioning

International Nuclear Information System (INIS)

Ross, W.M.

1990-01-01

The paper discusses the regulatory aspects of decommissioning commercial nuclear power stations in the UK. The way in which the relevant legislation has been used for the first time in dealing with the early stages of decommissioning commercial nuclear reactor is described. International requirements and how they infit with the UK system are also covered. The discussion focusses on the changes which have been required, under the Nuclear Site Licence, to ensure that the licensee carries out of work of reactor decommissioning in a safe and controlled manner. (Author)

76 FR 57060 - International Cooperation on Harmonisation of Technical Requirements for Registration of...

Science.gov (United States)

2011-09-15

...] International Cooperation on Harmonisation of Technical Requirements for Registration of Veterinary Medicinal... veterinary use by the International Cooperation on Harmonisation of Technical Requirements for Registration... regulatory authorities and industry associations to promote the international harmonization of regulatory...

Mixed wasted integrated program: Logic diagram

International Nuclear Information System (INIS)

Mayberry, J.; Stelle, S.; O'Brien, M.; Rudin, M.; Ferguson, J.; McFee, J.

1994-01-01

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development's Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR)

Mixed wasted integrated program: Logic diagram

Energy Technology Data Exchange (ETDEWEB)

Mayberry, J.; Stelle, S. [Science Applications International Corp., Idaho Falls, ID (United States); O`Brien, M. [Univ. of Arizona, Tucson, AZ (United States); Rudin, M. [Univ. of Nevada, Las Vegas, NV (United States); Ferguson, J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); McFee, J. [I.T. Corp., Albuquerque, NM (United States)

1994-11-30

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

Regulatory networks, legal federalism, and multi-level regulatory systems

OpenAIRE

Kerber, Wolfgang; Wendel, Julia

2016-01-01

Transnational regulatory networks play important roles in multi-level regulatory regimes, as e.g, the European Union. In this paper we analyze the role of regulatory networks from the perspective of the economic theory of legal federalism. Often sophisticated intermediate institutional solutions between pure centralisation and pure decentralisation can help to solve complex tradeoff problems between the benefits and problems of centralised and decentralised solutions. Drawing upon the insight...

A study on the implement of regulatory issue problems about service business

International Nuclear Information System (INIS)

Kim, In Hwan; Shim, H. S.; Yoon, K. H.; Jun, I. Y.; Kang, W. S.; Chang, J. H.

2004-12-01

This study is intended to derive a proposal for revision of the Atomic Energy Law, with understanding of differences between regulatory requirements and current issues based on findings during safety review and regular inspection. The contents and scope of this study is as follows: - Deep review for service business in 'the rationalization of the radiation protection system related with use of radionuclide', studied by Korea Isotope Association and presentation in the Korea Association for radiation protection, - Efficient regulatory activity through pre-finding of current regulatory issues to be derived during safety review and regular inspection

Pathogenic adaptation of intracellular bacteria by rewiring a cis-regulatory input function.

Science.gov (United States)

Osborne, Suzanne E; Walthers, Don; Tomljenovic, Ana M; Mulder, David T; Silphaduang, Uma; Duong, Nancy; Lowden, Michael J; Wickham, Mark E; Waller, Ross F; Kenney, Linda J; Coombes, Brian K

2009-03-10

The acquisition of DNA by horizontal gene transfer enables bacteria to adapt to previously unexploited ecological niches. Although horizontal gene transfer and mutation of protein-coding sequences are well-recognized forms of pathogen evolution, the evolutionary significance of cis-regulatory mutations in creating phenotypic diversity through altered transcriptional outputs is not known. We show the significance of regulatory mutation for pathogen evolution by mapping and then rewiring a cis-regulatory module controlling a gene required for murine typhoid. Acquisition of a binding site for the Salmonella pathogenicity island-2 regulator, SsrB, enabled the srfN gene, ancestral to the Salmonella genus, to play a role in pathoadaptation of S. typhimurium to a host animal. We identified the evolved cis-regulatory module and quantified the fitness gain that this regulatory output accrues for the bacterium using competitive infections of host animals. Our findings highlight a mechanism of pathogen evolution involving regulatory mutation that is selected because of the fitness advantage the new regulatory output provides the incipient clones.

Efficient Reverse-Engineering of a Developmental Gene Regulatory Network

Science.gov (United States)

Cicin-Sain, Damjan; Ashyraliyev, Maksat; Jaeger, Johannes

2012-01-01

Understanding the complex regulatory networks underlying development and evolution of multi-cellular organisms is a major problem in biology. Computational models can be used as tools to extract the regulatory structure and dynamics of such networks from gene expression data. This approach is called reverse engineering. It has been successfully applied to many gene networks in various biological systems. However, to reconstitute the structure and non-linear dynamics of a developmental gene network in its spatial context remains a considerable challenge. Here, we address this challenge using a case study: the gap gene network involved in segment determination during early development of Drosophila melanogaster. A major problem for reverse-engineering pattern-forming networks is the significant amount of time and effort required to acquire and quantify spatial gene expression data. We have developed a simplified data processing pipeline that considerably increases the throughput of the method, but results in data of reduced accuracy compared to those previously used for gap gene network inference. We demonstrate that we can infer the correct network structure using our reduced data set, and investigate minimal data requirements for successful reverse engineering. Our results show that timing and position of expression domain boundaries are the crucial features for determining regulatory network structure from data, while it is less important to precisely measure expression levels. Based on this, we define minimal data requirements for gap gene network inference. Our results demonstrate the feasibility of reverse-engineering with much reduced experimental effort. This enables more widespread use of the method in different developmental contexts and organisms. Such systematic application of data-driven models to real-world networks has enormous potential. Only the quantitative investigation of a large number of developmental gene regulatory networks will allow us to

Nuclear reactor decommissioning: an analysis of the regulatory environments

International Nuclear Information System (INIS)

Cantor, R.

1986-08-01

In the next several decades, the electric utility industry will be faced withthe retirement of 50,000 megawatts (mW) of nuclear capacity. Responsibility for the financial and technical burdens this activity entails has been delegated to the utilities operating the reactors. However, the operators will have to perform the tasks of reactor decommissioning within the regulatory environment dictated by federal, state and local regulations. The purpose of this study was to highlight some of the current and likely trends in regulations and regulatory practices that will significantly affect the costs, technical alternatives and financing schemes encountered by the electric utilities and their customers. To identify significant trends and practices among regulatory bodies and utilities, a reviw of these factors was undertaken at various levels in the regulatory hierarchy. The technical policies were examined in reference to their treatment of allowed technical modes, restoration of the plant site including any specific recognition of the residual radioactivity levels, and planning requirements. The financial policies were examined for specification of acceptable financing arrangements, mechanisms which adjust for changes in the important parameters used to establish the fund, tax and rate-base treatments of the payments to and earnings on the fund, and whether or not escalation and/or discounting were considered in the estimates of decommissioning costs. The attitudes of regulators toward financial risk, the tax treatment of the decommissioning fund, and the time distribution of the technical mode were found to have the greatest effect on the discounted revenue requirements. Under plausible assumptions, the cost of a highly restricted environment is about seven times that of the minimum revenue requirement environment for the plants that must be decommissioned in the next three decades

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

78 FR 14306 - International Cooperation on Harmonisation of Technical Requirements for Registration of...

Science.gov (United States)

2013-03-05

...]; (Formerly Docket No. 00D-1631)] International Cooperation on Harmonisation of Technical Requirements for... for veterinary use by the International Cooperation on Harmonisation of Technical Requirements for... regulatory authorities and industry associations to promote the international harmonization of regulatory...

Regulatory aspects of Olkiluoto 3 nuclear power plant (EPR-1600) (Draft, 12 Sept. 2005)

International Nuclear Information System (INIS)

Sandberg, J.; Tiippana, P.

2005-01-01

A 1600 MWe European Pressurized Water Reactor (EPR) supplied by the Framatome ANP - Siemens Consortium is under construction at the Olkiluoto site in Finland. Current international safety requirements and especially French and German operating experience have been applied in the design. Finnish requirements and operating experience have also been applied, especially regarding site-specific features. Severe accidentmanagement and protection against a collision of a large passenger airplane are implemented in the plant design. The plant safety features, licensing procedure, Finnish regulatory requirements, changes to the original EPR design, project quality management and regulatory control are discussed. (author)

Regulatory and extra-regulatory testing to demonstrate radioactive material packaging safety

International Nuclear Information System (INIS)

Ammerman, D.J.

1997-01-01

Packages for the transportation of radioactive material must meet performance criteria to assure safety and environmental protection. The stringency of the performance criteria is based on the degree of hazard of the material being transported. Type B packages are used for transporting large quantities of radioisotopes (in terms of A 2 quantities). These packages have the most stringent performance criteria. Material with less than an A 2 quantity are transported in Type A packages. These packages have less stringent performance criteria. Transportation of LSA and SCO materials must be in open-quotes strong-tightclose quotes packages. The performance requirements for the latter packages are even less stringent. All of these package types provide a high level of safety for the material being transported. In this paper, regulatory tests that are used to demonstrate this safety will be described. The responses of various packages to these tests will be shown. In addition, the response of packages to extra-regulatory tests will be discussed. The results of these tests will be used to demonstrate the high level of safety provided to workers, the public, and the environment by packages used for the transportation of radioactive material

Regulatory Inspection of Nuclear Power Plants in NEA Member Countries

International Nuclear Information System (INIS)

1978-01-01

Based on the replies to a questionnaire, this report gives a description and comparative evaluation of the regulatory inspection activities in several NEA Member countries. The questionnaire which was circulated to all Member countries requested details on the organisation, system, scope and objectives of nuclear regulatory inspection and the effort required throughout all stages of the life of a nuclear plant including the use of independent bodies or consultants. Additional information was requested on the documentation concerned with regulatory inspections, incident and accident reporting procedures, and the duties, powers and bases for recruitment of regulatory personnel with the object of covering all related aspects. However, because of the differences in national practices and perhaps in the interpretation of the questionnaire, it proved to be extremely difficult to make an evaluation and comparison of inspection activities and effort involved in these Member countries. This report, which includes a section on the nuclear power programme in Member countries, should therefore only be regarded as an initial review but it provides a useful contribution to the exchange of experience and views on regulatory inspection practices

Probabilistic safety assessment - regulatory perspective

International Nuclear Information System (INIS)

Solanki, R.B.; Paul, U.K.; Hajra, P.; Agarwal, S.K.

2002-01-01

Full text: Nuclear power plants (NPPs) have been designed, constructed and operated mainly based on deterministic safety analysis philosophy. In this approach, a substantial amount of safety margin is incorporated in the design and operational requirements. Additional margin is incorporated by applying the highest quality engineering codes, standards and practices, and the concept of defence-in-depth in design and operating procedures, by including conservative assumptions and acceptance criteria in plant response analysis of postulated initiating events (PIEs). However, as the probabilistic approach has been improved and refined over the years, it is possible for the designer, operator and regulator to get a more detailed and realistic picture of the safety importance of plant design features, operating procedures and operational practices by using probabilistic safety assessment (PSA) along with the deterministic methodology. At present, many countries including USA, UK and France are using PSA insights in their decision making along with deterministic basis. India has also made substantial progress in the development of methods for carrying out PSA. However, consensus on the use of PSA in regulatory decision-making has not been achieved yet. This paper emphasises on the requirements (e.g.,level of details, key modelling assumptions, data, modelling aspects, success criteria, sensitivity and uncertainty analysis) for improving the quality and consistency in performance and use of PSA that can facilitate meaningful use of the PSA insights in the regulatory decision-making in India. This paper also provides relevant information on international scenario and various application areas of PSA along with progress made in India. The PSA perspective presented in this paper may help in achieving consensus on the use of PSA for regulatory / utility decision-making in design and operation of NPPs

75 FR 21523 - Airworthiness Standards; Rotor Overspeed Requirements

Science.gov (United States)

2010-04-26

...- Engine-Inoperative (OEI) ratings. Overspeed Capability. The r.p.m. (revolutions per minute) at which the... regulation justify its costs. Second, the Regulatory Flexibility Act of 1980 (Pub. L. 96-354) requires... should be clear. The net effect of this proposed rule would provide regulatory cost relief. Second, all...

Current Status of Regulatory Science Education in Faculties of Pharmaceutical Science in Japan.

Science.gov (United States)

Tohkin, Masahiro

2017-01-01

I introduce the current pharmaceutical education system in Japan, focusing on regulatory science. University schools or faculties of pharmaceutical science in Japan offer two courses: a six-year course for pharmacists and a four-year course for scientists and technicians. Students in the six-year pharmaceutical course receive training in hospitals and pharmacies during their fifth year, and those in the four-year life science course start research activities during their third year. The current model core curriculum for pharmaceutical education requires them to "explain the necessity and significance of regulatory science" as a specific behavior object. This means that pharmacists should understand the significance of "regulatory science", which will lead to the proper use of pharmaceuticals in clinical practice. Most regulatory science laboratories are in the university schools or faculties of pharmaceutical sciences; however, there are too few to conduct regulatory science education. There are many problems in regulatory science education, and I hope that those problems will be resolved not only by university-based regulatory science researchers but also by those from the pharmaceutical industry and regulatory authorities.

Safety culture as a matter of regulatory control and regulatory effectiveness

International Nuclear Information System (INIS)

Camargo, C.T.M.; Furieri, E.B.; Arrieta, L.A.I.; Almeida, C.U.C.

2002-01-01

More than 15 years have passed since the term 'safety culture' was introduced by the International Nuclear Safety Advisory Group (INSAG), and although the concept now is widely accepted, practical applications and characteristics have been disseminated mainly for nuclear power plant operating organizations. There is still a lack of international guidance on the use of safety culture as a regulatory matter and on the application of the concept within regulatory organizations. This work explores the meaning of safety culture in two different fields: as an element of safety management systems it shall be a matter of regulatory control; as a complementary tool for quality management it should be used to enhance regulatory effectiveness. Brazilian recent experience on regulating nuclear power reactors provide some examples on how the concept of safety culture may influence regulatory strategies and regulatory management. (author)

78 FR 66940 - Regulatory Requirements for Hearing Aid Devices and Personal Sound Amplification Products; Draft...

Science.gov (United States)

2013-11-07

... for such products. These inconsistent interpretations of the definitions may inadvertently result in... amplification products (PSAPs), as well as the regulatory controls that apply to each. This draft guidance is... of clarity regarding how the Agency defines a hearing aid versus a personal sound amplification...

Improved cost-benefit techniques in the US Nuclear Regulatory Commission

Energy Technology Data Exchange (ETDEWEB)

Cronin, F.J.; Nesse, R.J.; Vaeth, M.; Wusterbarth, A.R.; Currie, J.W.

1983-06-01

The major objective of this report is to help the US Nuclear Regulatory Commission (NRC) in its regulatory mission, particularly with respect to improving the use of cost-benefit analysis and the economic evaluation of resources within the NRC. The objectives of this effort are: (1) to identify current and future NRC requirements (e.g., licensing) for valuing nonmarket goods; (2) to identify, highlight, and present the relevant efforts of selected federal agencies, some with over two decades of experience in valuing nonmarket goods, in this area; and (3) to review methods for valuing nonmarket impacts and to provide estimats of their magnitudes. Recently proposed legislation may result in a requirement for not only more sophisticated valuation analyses, but more extensive applications of these techniques to issues of concern to the NRC. This paper is intended to provide the NRC with information to more efficiently meet such requirements.

75 FR 64771 - Self-Regulatory Organizations; Order Approving Minor Rule Violation Plan for BATS Y-Exchange, Inc.

Science.gov (United States)

2010-10-20

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-63113; File No. 4-616] Self-Regulatory... provisions of Rule 19d-1(c)(1) of the Act \\4\\ requiring that a self-regulatory organization promptly file... Commission adopted amendments to paragraph (c) of Rule 19d-1 to allow self-regulatory organizations (``SROs...

Regulatory approach of the monitoring the effectiveness of maintenance at nuclear power plants program

International Nuclear Information System (INIS)

Vajgel, Stefan

2009-03-01

The electrical power generation using nuclear power plants requires this installation being safety, reliable and available for the working periods. For this purpose, an adequate, effective and well conducted maintenance program makes an essential and useful tool to the owner of the plant. However, it is necessary to follow the regulatory requirements for this program implementation which monitories this maintenance effectiveness. There are Brazilian norms requirements which must be followed. The international regulatory guides establish these requirements in good details but it is necessary to verify if this methodology for implementing can be totally applied here in Brazil. Then, the american guide NUMARC 93-01 which details how can be implemented a program for this monitoring, shows some methods for using. In this thesis, the Delphi and Probabilistic Safety Analysis were briefly included because they were preferred for implementing this monitoring.in a Brazilian plant. The results which are being obtained show that, looking the regulatory aspects, the NUMARC 93-01 follows our regulations and gives good results for the plant management. (author)

CsrB, a noncoding regulatory RNA, is required for BarA-dependent expression of biocontrol traits in Rahnella aquatilis HX2.

Science.gov (United States)

Mei, Li; Xu, Sanger; Lu, Peng; Lin, Haiping; Guo, Yanbin; Wang, Yongjun

2017-01-01

Rahnella aquatilis is ubiquitous and its certain strains have the applicative potent as a plant growth-promoting rhizobacteria. R. aquatilis HX2 is a biocontrol agent to produce antibacterial substance (ABS) and showed efficient biocontrol against crown gall caused by Agrobacterium vitis on sunflower and grapevine plants. The regulatory network of the ABS production and biocontrol activity is still limited known. In this study, a transposon-mediated mutagenesis strategy was used to investigate the regulators that involved in the biocontrol activity of R. aquatilis HX2. A 366-nt noncoding RNA CsrB was identified in vitro and in vivo, which regulated ABS production and biocontrol activity against crown gall on sunflower plants, respectively. The predicted product of noncoding RNA CsrB contains 14 stem-loop structures and an additional ρ-independent terminator harpin, with 23 characteristic GGA motifs in the loops and other unpaired regions. CsrB is required for ABS production and biocontrol activity in the biocontrol regulation by a two-component regulatory system BarA/UvrY in R. aquatilis HX2. The noncoding RNA CsrB regulates BarA-dependent ABS production and biocontrol activity in R. aquatilis HX2. To the best of our knowledge, this is the first report of noncoding RNA as a regulator for biocontrol function in R. aquatilis.

Digital publication of EDF's regulatory files

International Nuclear Information System (INIS)

Picard, Pauline

2012-06-01

The Engineering Centre of Deconstruction and Environment wants to modernize the distribution of its regulatory filings in digital form. This project requires a prior upstream of its implementation to determine the best publishing solution suited to the constraints of diffusion and heritage protection of EDF

Requirements for growth and IL-10 expression of highly purified human T regulatory cells

Science.gov (United States)

Bonacci, Benedetta; Edwards, Brandon; Jia, Shuang; Williams, Calvin; Hessner, Martin J.; Gauld, Stephen; Verbsky, James

2013-01-01

Human regulatory T cells (TR) cells have potential for the treatment of a variety of immune mediated diseases but the anergic phenotype of these cells makes them difficult to expand in vitro. We have examined the requirements for growth and cytokine expression from highly purified human TR cells, and correlated these findings with the signal transduction events of these cells. We demonstrate that these cells do not proliferate or secrete IL-10 even in the presence of high doses of IL-2. Stimulation with a superagonistic anti-CD28 antibody (clone 9D4) and IL-2 partially reversed the proliferative defect, and this correlated with reversal of the defective calcium mobilization in these cells. Dendritic cells were effective at promoting TR cell proliferation, and under these conditions the proliferative capacity of TR cells was comparable to conventional CD4 lymphocytes. Blocking TGF-β activity abrogated IL-10 expression from these cells, while addition of TGF-β resulted in IL-10 production. These data demonstrate that highly purified populations of TR cells are anergic even in the presence of high doses of IL-2. Furthermore, antigen presenting cells provide proper co-stimulation to overcome the anergic phenotype of TR cells, and under these conditions they are highly sensitive to IL-2. In addition, these data demonstrate for the first time that TGF-β is critical to enable human TR cells to express IL-10. PMID:22562448

US Department of Energy wind turbine candidate site program: the regulatory process

Energy Technology Data Exchange (ETDEWEB)

Greene, M.R.; York, K.R.

1982-06-01

Sites selected in 1979 as tentative sites for installation of a demonstration MOD-2 turbine are emphasized. Selection as a candidate site in this program meant that the US Department of Energy (DOE) designated the site as eligible for a DOE-purchased and installed meteorological tower. The regulatory procedures involved in the siting and installation of these meteorological towers at the majority of the candidate sites are examined. An attempt is also made, in a preliminary fashion, to identify the legal and regulatory procedures that would be required to put up a turbine at each of these candidate sites. The information provided on each of these sites comes primarily from utility representatives, supplemented by conversations with state and local officials. The major findings are summarized on the following: federal requirements, state requirements, local requirements, land ownership, wind rights, and public attitudes.

TANK FARM ENVIRONMENTAL REQUIREMENTS

International Nuclear Information System (INIS)

TIFFT, S.R.

2003-01-01

Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment, The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all single-shell tank (SST) and double-shell tank (DST) waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm Environmental Specifications Document (ESD) implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations/Projects or that Operations Projects have direct impact upon. This document does not supercede or replace any Department of Energy (DOE) Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or Notice of Construction for an inclusive listing of requirements

Regulatory control of radiation sources. Safety guide

International Nuclear Information System (INIS)

2004-01-01

The basic requirements for the protection of persons against exposure to ionizing radiation and for the safety of radiation sources were established in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards), jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the OECD Nuclear Energy Agency (OECD/ NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO) (the Sponsoring Organizations). The application of the Basic Safety Standards is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities for radiation protection and safety. Requirements relating to the legal and governmental infrastructure for the safety of nuclear facilities and sources of ionizing radiation, radiation protection, the safe management of radioactive waste and the safe transport of radioactive material are established in the Safety Requirements on Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, Safety Standards Series No. GS-R-1. This Safety Guide, which is jointly sponsored by the FAO, the IAEA, the International Labour Office, the PAHO and the WHO, gives detailed guidance on the key elements for the organization and operation of a national regulatory infrastructure for radiation safety, with particular reference to the functions of the national regulatory body that are necessary to ensure the implementation of the Basic Safety Standards. The Safety Guide is based technically on material first published in IAEA-TECDOC-10671, which was jointly sponsored by the FAO, the IAEA, the OECD/NEA, the PAHO and the WHO. The requirements established in GS-R-1 have been taken into account. The Safety Guide is oriented towards national

Regulatory audit to the Argentine teletherapy units

International Nuclear Information System (INIS)

Kay, J.M.

1995-01-01

As a consequence of an erroneous calibration of the ionization chamber dosimeter of a new licensed 6 Mev electron lineal accelerator that caused accidental overexposures in the first patients under treatment, the Regulatory Board decided to perform an audit to every teletherapy unit (accelerator and telegammatherapy units) in Argentina. The audit was carried out at the en of 1994 in 27 accelerators and 107 telegammatherapy units. The objectives of the audit were the control of the mechanical and optical aspects of the each accelerator and telegammatherapy unit and the control of the calibration of their radiation beams. The last action was undertaken to detect as soon as possible, any eventual accidental overexposure or underexposure of patients under treatment. The audit was conducted by the author and performed for a team of 22 inspectors who worked in groups of 2 to 3 people and completed the inspection of the teletherapy units of the whole country in 3 months. As a result of the audit, the Regulatory Board had in a short period a clear panorama of the performance of each teletherapy unit of the country and also confirmed that no accidental situation had happened. The audit revealed the necessity of imposing urgent regulatory requirements not related to the calibration of the radiation beam in 5% of the cases, as well as non-urgent requirements of different importance in approximately other 60% of the cases. (author)

76 FR 21932 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Granting...

Science.gov (United States)

2011-04-19

... statement therein, as follows: I. Introduction On February 4, 2011, the Financial Industry Regulatory...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Granting Approval of a... Financial Industry Regulatory Authority, Inc. (``FINRA'') to amend Rule 13806 of the Code of Arbitration...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of bench-marking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Performance-based quality assurance: the regulatory viewpoint

International Nuclear Information System (INIS)

Sajaroff, Pedro M.

2000-01-01

This paper complements and upgrades a previous one recently presented, the aim is a further contribution to a wide dissemination of this new methodology and way of thinking. Modern quality management techniques emphasizes errors prevention instead of finding and correcting them, in line with the new generation of ISO-9000 documents. Performance-based QA is coherent with this 'right-first-time' attitude, resting on the managerial role (establishing and applying policies and instructions allowing to integrate quality objectives to everyday work) and on the responsibility of every single involved person (the attainment of such objectives). The contents of the final draft of the revised IAEA NUSS Code on QA -namely 'Quality Assurance for Safety in Nuclear Power Plants and other Nuclear Facilities', is based on that approach, so it is not perspective. The text only contains ten basic requirements, where the objective is improving nuclear safety through an improvement in the methods applied for attaining quality during design, construction, commissioning, operation and decommissioning of nuclear installations. These requirements are assigned to: 'Management' (QA programme; training and qualification; non-conformance control and corrective actions; document control and records); 'Performance' (work; design; procurement; inspection and testing for acceptance) and 'Assessment' (management self-assessment; independent assessment). The management is responsible for planning, organization, direction, control and support; the line groups are responsible for attaining quality; and the assessment group is responsible for analyzing the management's and the line groups' effectiveness. From the regulatory point of view in the performance context, operating organizations will have to demonstrate the effective fulfillment of QA requirements to the satisfaction of regulatory authorities. This is not a novel mechanism, it is usual within the regulatory performance approach. The Code is

Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 2. Evaluation of seismic designs: a review of seismic design requirements for Nuclear Power Plant Piping

Energy Technology Data Exchange (ETDEWEB)

1985-04-01

This document reports the position and recommendations of the NRC Piping Review Committee, Task Group on Seismic Design. The Task Group considered overlapping conservation in the various steps of seismic design, the effects of using two levels of earthquake as a design criterion, and current industry practices. Issues such as damping values, spectra modification, multiple response spectra methods, nozzle and support design, design margins, inelastic piping response, and the use of snubbers are addressed. Effects of current regulatory requirements for piping design are evaluated, and recommendations for immediate licensing action, changes in existing requirements, and research programs are presented. Additional background information and suggestions given by consultants are also presented.

Support in the development of Regulatory Procedures for licensing Lepse Waste Management Operations

International Nuclear Information System (INIS)

2001-05-01

This report describes a project intended to assist Gosatomnadzor of Russia develop a set of documents defining the regulatory requirements for information to be submitted to Gosatomnadzor in support of any application for a licence relating to the removal of spent nuclear fuel from the depot ship Lepse. The project resulted in the development of three regulatory documents covering the documentation required in support of a licence application, the requirements for quality assurance arrangements and the safety analysis report. The working method adopted involved staged development of draft material and review at workshops involving a wide variety of relevant Russian and western organizations. The input and output of the workshops was fully documented to provide an audit trail for the document development and the rationale for what has been included and what is excluded and why. The availability of the regulatory documents in English should significantly assist in the use of the documents by western partners in the actual industrial project. Important experience and information was exchanged among participants in the project. The developing understanding is an important element in providing confidence, from a western perspective, that appropriate regulatory supervision can be applied to industrial projects supported by organizations such as the European Commission and national agencies. The same working methods could be used in the next phase of Lepse regulatory support, i.e., support in development of the procedures for the regulatory review of licence applications, and, subsequently, support in the application of the regulatory inspection process to ensure licence conditions are being complied with. Similarly, these working methods could be used in providing regulatory support for nuclear and radiation safety related to other industrial projects involving radioactive waste management. The participants in this sub-project described in this report were Norwegian

77 FR 26018 - Determination of Regulatory Review Period for Purposes of Patent Extension; Victoza

Science.gov (United States)

2012-05-02

... exercise to improve glycemic control in adults with type 2 diabetes mellitus. Subsequent to this approval...] Determination of Regulatory Review Period for Purposes of Patent Extension; Victoza AGENCY: Food and Drug... regulatory review period for Victoza and is publishing this notice of that determination as required by law...

75 FR 33871 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing and Immediate...

Science.gov (United States)

2010-06-15

...-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing and Immediate Effectiveness of... is hereby given that on May 28, 2010, the Fixed Income Clearing Corporation (``FICC'') filed with the... Division's (``GSD'') rules pertaining to the Required Fund Deposit Deadline. II. Self-Regulatory...

18 CFR 153.21 - Conformity with requirements.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Conformity with requirements. 153.21 Section 153.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Requirements § 153.21 Conformity with requirements. (a) General Rule. Applications under subparts B and C of...

Regulatory compliance guide for DOT-7A type A packaging design

International Nuclear Information System (INIS)

Kelly, D.L.

1996-01-01

The purpose of this guide is to provide instruction for assuring that the regulatory design requirements for a DOT-7A Type A packaging are met. This guide also supports the testing and evaluation activities that are performed on new packaging designs by a DOE-approved test facility through the DOE's DOT-7A Test Program. This Guide was updated to incorporate regulatory changes implemented by HM-169A (49 CFR, 'Transportation')

Satisfying regulatory and accreditation requirements for quality control.

Science.gov (United States)

Ehrmeyer, Sharon S

2013-03-01

The Clinical Laboratory Improvement Amendments of 1988 (CLIA) requires all US clinical laboratories that test "materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of any disease..." to be regulated. The CLIA mandates are site neutral; based on test complexity; and focus on the three phases of the testing process (preanalytical, analytical, and postanalytical). Many testing sites choose to meet the CLIA requirements by following the testing standards of a professional accreditation organization deemed by the Centers for Medicare and Medicaid Services. The three principal organizations are The Joint Commission, the College of American Pathologists, and COLA. Copyright © 2013 Elsevier Inc. All rights reserved.

FORECAST: Regulatory effects cost analysis software manual -- Version 4.1. Revision 1

International Nuclear Information System (INIS)

Lopez, B.; Sciacca, F.W.

1996-07-01

The FORECAST program was developed to facilitate the preparation of the value-impact portion of NRC regulatory analyses. This PC program integrates the major cost and benefit considerations that may result from a proposed regulatory change. FORECAST automates much of the calculations typically needed in a regulatory analysis and thus reduces the time and labor required to perform these analyses. More importantly, its integrated and consistent treatment of the different value-impact considerations should help assure comprehensiveness, uniformity, and accuracy in the preparation of NRC regulatory analyses. The Current FORECAST Version 4.1 has been upgraded from the previous version and now includes an uncertainty package, an automatic cost escalation package, and other improvements. In addition, it now explicitly addresses public health impacts, occupational health impacts, onsite property damage, and government costs. Thus, FORECAST Version 4.1 can treat all attributes normally quantified in a regulatory analysis

Overlapping positive and negative regulatory domains of the human β-interferon gene

International Nuclear Information System (INIS)

Goodbourn, S.; Maniatis, T.

1988-01-01

Virus of poly(I) x poly(C) induction of human β-interferon gene expression requires a 40-base-pair DNA sequence designated the interferon gene regulatory element (IRE). Previous studies have shown that the IRE contains both positive and negative regulatory DNA sequences. To localize these sequences and study their interactions, the authors have examined the effects of a large number of single-base mutations within the IRE on β-interferon gene regulation. They find that the IRE consists of two genetically separable positive regulatory domains and an overlapping negative control sequence. They propose that the β-interferon gene is switched off in uninduced cells by a repressor that blocks the interaction between one of the two positive regulatory sequences and a specific transcription factor. Induction would then lead to inactivation or displacement of the repressor and binding of transcription factors to both positive regulatory domains

18 CFR 284.126 - Reporting requirements.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Reporting requirements. 284.126 Section 284.126 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... AUTHORITIES Certain Transportation by Intrastate Pipelines § 284.126 Reporting requirements. (a) Notice of...

Competencies Setup for Nuclear Regulatory Staff in Thailand

International Nuclear Information System (INIS)

Pingish, Panupong; Siripirom, Lopchai; Nakkaew, Pongpan; Manuwong, Theerapatt; Wongsamarn, Vichian

2010-01-01

Competencies setup for regulatory bodies oversee a research reactor and nuclear power reactors in Thailand, concentrating on staff development in areas of review and assessment, inspection and enforcement, authorization, and development of regulations and guides. The regulatory body in Thailand is the Bureau of Nuclear Safety Regulation (BNSR) which belongs to the Office of Atoms for Peace (OAP). The BNSR is divided into 4 groups according to the International Atomic Energy Agency (IAEA). These groups are the nuclear safety administration group, nuclear safety technical support group, nuclear safety assessment and licensing group, and the nuclear installations inspection group. Each group is divided into senior and junior positions. The competencies model was used for implementation of staff qualification, career planning and professional progression by BNSR. Competencies are related to knowledge, skills and attitudes (KSAs) needed to perform their job. A key issue is obtaining competencies for the regulatory bodies. The systematic approach to training (SAT) has been used in several countries for improvement regulator performance. The SAT contains 5 steps, including analysis, design, development, implementation and evaluation, to achieve competencies. The SAT provides a logical progression from the identification of competencies required to perform a job to the design, development and implementation of training using the competencies model. In the first step, BNSR performs an operating analysis of training needs assessment (TNA) by using gap analysis technique, as suggested by IAEA. Individual regulatory bodies address the gap using appropriate training program, after comparing the actual and desired competency profiles to determine the gap. This paper examines competencies setup for regulatory staff of BNSR as a result of gaps analysis to establish a scheme for design characteristics of regulatory staff and training courses, thereby enhancing the regulatory

Exemption from Regulatory Control of Goods Containing Small Amounts of Radioactive Material

International Nuclear Information System (INIS)

2012-01-01

Small amounts of radioactive material may be added to various goods for functional reasons. Several such items are currently available for either professional or personal use. These include ionization chamber smoke detectors, thoriated-tungsten welding rods, luminous dials, electrical devices and electric discharge lamps. Some of these goods may be intended for particular types of market such as cinemas or other places to which the public may have access, but they are unlikely to be provided directly to members of the public. Other goods may be intended for wide scale use and therefore readily available on the market as consumer products through commercial outlets where personal and household products are normally purchased. Members of the public may be exposed to ionizing radiation as a consequence of activities such as transport, storage, use and disposal of such goods. The IAEA safety standards provide the basic requirements for regulatory control of such goods. The most relevant documents are the Governmental, Legal and Regulatory Framework for Safety and the International Basic Safety Standards (hereafter referred to as the BSS). These requirements include notification of a practice to the regulatory body and authorization of the practice by the regulatory body. Provision is made for the exemption of practices from these and other regulatory requirements based on general criteria given in the BSS or any exemption levels specified by the regulatory body on the basis of these criteria. The BSS, which are jointly sponsored by the IAEA and several other international organizations, apply to all facilities and all activities for peaceful purposes that give rise to exposure to radiation. In the interest of harmonization of approaches among Member States, some guidance on the application of the criteria for exemption has been provided in a number of Safety Guides, e.g. Regulatory Control of Radiation Sources, IAEA Safety Standards Series No. GS-G-1.5 (2004) and the

Regulatory analysis of the Underground Storage Tank-Integrated Demonstration Program

International Nuclear Information System (INIS)

Smith, E.H.

1992-01-01

The Underground Storage Tank-Integrated Demonstration (UST-ID) Program has been developed to identify, demonstrate, test, and evaluate technologies that will provide alternatives to the current underground storage tank remediation program. The UST-ID Program is a national program that consists of five participating US Department of Energy (DOE) sites where technologies can be developed an ultimately demonstrated. Once these technologies are demonstrated, the UST-ID Program will transfer the developed technology system to industry (governmental or industrial) for application or back to Research and Development for further evaluation and modification, as necessary. In order to ensure that the UST-ID Program proceeds without interruption, it will be necessary to identify regulatory requirements along with associated permitting and notification requirements early in the technology development process. This document serves as a baseline for identifying certain federal and state regulatory requirements that may impact the UST-ID Program and the demonstration of any identified technologies

Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants (Cooperative Agreement DE-FC03-99SF21902, Am. M004) Final Technical Report

International Nuclear Information System (INIS)

Ritterbusch, Stanley E.

2003-01-01

accidents would be an inherent part of the Probabilistic Safety Assessment for the plant and their evaluation would be probabilistic. Other first year accomplishments include (1) the conversion of an NRC database for cross-referencing NRC criteria and industry codes and standards to Microsoft 2000 software, (2) an assessment of the NRC's hearing process which concluded that the normal cross-examination during public hearings is not actually required by the U.S. Administrative Procedures Act, (3) the identification and listing of reliability data sources, and (4) interfacing with other industry groups (e.g., NEI and IAEA) and NRC at workshops for risk-informing regulations. The major accomplishments during the second year consisted of (1) issuance of the final report for Subtask 1.1, ''Identify Current Applicable Regulatory Requirements [and Industry Standards],'' (2) issuance of the final report for Subtask 1.2,'' Identify Structures, Systems, and Components and Their Associate d Costs for a Typical Plant,'' (3) extension of the new, highly risk-informed design and regulatory framework to non-light-water-reactor technology, (4) completion of more detailed thermal-hydraulic and probabilistic analyses of advanced conceptual reactor system/component designs, (6) initial evaluation and recommendations for improvement of the NRC design review process, and (7) initial development of the software format, procedures and statistical routines needed to store, analyze and retrieve the available reliability data. Final reports for Subtasks 1.1 (regulatory and design criteria) and 1.2 (costs for structures, systems, and components) were prepared and issued. A final report for Subtask 1.3 (Regulatory Framework) was drafted with the aim to issue it in Phase 3 (Year 3). One technical report was produced for Subtask 1.4 (methods development) and two technical reports were produced for Subtask 1.6 (sample problem analysis). An interim report on the NRC design review process (Subtask 1.7) was

77 FR 76319 - Self-Regulatory Organizations; BOX Options Exchange LLC; Order Approving Minor Rule Violation...

Science.gov (United States)

2012-12-27

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-68489; File No. 4-655] Self-Regulatory Organizations; BOX Options Exchange LLC; Order Approving Minor Rule Violation Plan for BOX Options Exchange LLC... \\4\\ requiring that a self-regulatory organization (``SRO'') promptly file notice with the Commission...

Multi-Year Program Plan - Building Regulatory Programs

Energy Technology Data Exchange (ETDEWEB)

none,

2010-10-01

This document presents DOE’s multi-year plan for the three components of the Buildings Regulatory Program: Appliance and Equipment Efficiency Standards, ENERGY STAR, and the Building Energy Codes Program. This document summarizes the history of these programs, the mission and goals of the programs, pertinent statutory requirements, and DOE’s 5-year plan for moving forward.

PRMT1 mediated methylation of TAF15 is required for its positive gene regulatory function

Energy Technology Data Exchange (ETDEWEB)

Jobert, Laure; Argentini, Manuela [Institut de Genetique et de Biologie Moleculaire et Cellulaire (IGBMC), CNRS UMR 7104, INSERM U 596, Universite Louis Pasteur de Strasbourg, BP 10142 - 67404 Illkirch Cedex, CU de Strasbourg (France); Tora, Laszlo, E-mail: laszlo@igbmc.u-strasbg.fr [Institut de Genetique et de Biologie Moleculaire et Cellulaire (IGBMC), CNRS UMR 7104, INSERM U 596, Universite Louis Pasteur de Strasbourg, BP 10142 - 67404 Illkirch Cedex, CU de Strasbourg (France)

2009-04-15

TAF15 (formerly TAF{sub II}68) is a nuclear RNA-binding protein that is associated with a distinct population of TFIID and RNA polymerase II complexes. TAF15 harbours an N-terminal activation domain, an RNA recognition motif (RRM) and many Arg-Gly-Gly (RGG) repeats at its C-terminal end. The N-terminus of TAF15 serves as an essential transforming domain in the fusion oncoprotein created by chromosomal translocation in certain human chondrosarcomas. Post-transcriptional modifications (PTMs) of proteins are known to regulate their activity, however, nothing is known on how PTMs affect TAF15 function. Here we demonstrate that endogenous human TAF15 is methylated in vivo at its numerous RGG repeats. Furthermore, we identify protein arginine N-methyltransferase 1 (PRMT1) as a TAF15 interactor and the major PRMT responsible for its methylation. In addition, the RGG repeat-containing C-terminus of TAF15 is responsible for the shuttling between the nucleus and the cytoplasm and the methylation of RGG repeats affects the subcellular localization of TAF15. The methylation of TAF15 by PRMT1 is required for the ability of TAF15 to positively regulate the expression of the studied endogenous TAF15-target genes. Our findings demonstrate that arginine methylation of TAF15 by PRMT1 is a crucial event determining its proper localization and gene regulatory function.

PRMT1 mediated methylation of TAF15 is required for its positive gene regulatory function

International Nuclear Information System (INIS)

Jobert, Laure; Argentini, Manuela; Tora, Laszlo

2009-01-01

TAF15 (formerly TAF II 68) is a nuclear RNA-binding protein that is associated with a distinct population of TFIID and RNA polymerase II complexes. TAF15 harbours an N-terminal activation domain, an RNA recognition motif (RRM) and many Arg-Gly-Gly (RGG) repeats at its C-terminal end. The N-terminus of TAF15 serves as an essential transforming domain in the fusion oncoprotein created by chromosomal translocation in certain human chondrosarcomas. Post-transcriptional modifications (PTMs) of proteins are known to regulate their activity, however, nothing is known on how PTMs affect TAF15 function. Here we demonstrate that endogenous human TAF15 is methylated in vivo at its numerous RGG repeats. Furthermore, we identify protein arginine N-methyltransferase 1 (PRMT1) as a TAF15 interactor and the major PRMT responsible for its methylation. In addition, the RGG repeat-containing C-terminus of TAF15 is responsible for the shuttling between the nucleus and the cytoplasm and the methylation of RGG repeats affects the subcellular localization of TAF15. The methylation of TAF15 by PRMT1 is required for the ability of TAF15 to positively regulate the expression of the studied endogenous TAF15-target genes. Our findings demonstrate that arginine methylation of TAF15 by PRMT1 is a crucial event determining its proper localization and gene regulatory function.

Analytical challenges and regulatory requirements for nasal drug products in europe and the u.s.

Science.gov (United States)

Trows, Sabrina; Wuchner, Klaus; Spycher, Rene; Steckel, Hartwig

2014-04-11

Nasal drug delivery can be assessed by a variety of means and regulatory agencies, e.g., the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) have published a set of guidelines and regulations proposing in vitro test methods for the characterization of nasal drug products. This article gives a summary of the FDA and EMA requirements regarding the determination of droplet size distribution (DSD), plume geometry, spray pattern and shot weights of solution nasal sprays and discusses the analytical challenges that can occur when performing these measurements. In order to support findings from the literature, studies were performed using a standard nasal spray pump and aqueous model formulations. The aim was to identify possible method-, device- and formulation-dependent influencing factors. The literature review, as well as the results from the studies show that DSD, plume geometry and spray pattern are influenced by, e.g., the viscosity of the solution, the design of the device and the actuation parameters, particularly the stroke length, actuation velocity and actuation force. The dominant factor influencing shot weights, however, is the adjustment of the actuation parameters, especially stroke length and actuation velocity. Consequently, for routine measurements assuring, e.g., the quality of a solution nasal spray or, for in vitro bioequivalence studies, the critical parameters, have to be identified and considered in method development in order to obtain reproducible and reliable results.

13 CFR 108.150 - Management and ownership diversity requirement.

Science.gov (United States)

2010-01-01

... VENTURE CAPITAL (âNMVCâ) PROGRAM Qualifications for the NMVC Program Organizing A Nmvc Company § 108.150... 70 percent of your Regulatory Capital or your Leverageable Capital. (c) Non-affiliation requirement. At least 30 percent of your Regulatory Capital and Leverageable Capital must be owned and controlled...

Co-suppression of sterol-regulatory element binding protein ...

African Journals Online (AJOL)

Administrator

2011-06-22

Jun 22, 2011 ... In Arabidopsis,. At5g35220 gene being sterol regulatory element-binding protein site 2, protease and metalloendopeptidase activity were required for chloroplast development and play a role in regulation of endodermal plastid size and number that are involved in ethylene-dependent gravitropism of light-.

75 FR 79811 - Department Regulatory Agenda; Semiannual Summary

Science.gov (United States)

2010-12-20

....S.C. 602), DOT's printed agenda entries include only: 1. The Agency's agenda preamble; 2. Rules that... Regulatory Flexibility Act. Printing of these entries is limited to fields that contain information required... transfer of the functions from the Office of Emergency Transportation (OET) to the Office of Intelligence...

Regulatory experiences from the spent fuel disposal step-wise implementation

International Nuclear Information System (INIS)

Heinonen, Jussi

2016-01-01

How to ensure regulatory readiness in different steps? Criteria for decision making: • Up-to-date safety requirements; • What is enough in this licensing step? Review strategy: • What is relevant in this licensing step?; • How to address (top-down or bottom-up review, own analysis, inspection)?Expertise: • Strategy for developing regulatory competences and resources; • Adapted to licensing step in question. Interaction with applicant: • important for mutual understanding; • Address main safety questions during pre-licensing – no surprises!

Enhancement of Nuclear Safety in Korea: A Regulatory Perspective

International Nuclear Information System (INIS)

Chung, K.Y.

2016-01-01

In the aftermath of Fukushima Daiichi accident in 2011 Korean regulatory body immediately performed special inspections on nuclear power plants (NPPs) and a research reactor in Korea, and issued an enforcement order for the licensees to implement fifty Fukushima action items to address the safety issues identified by the inspections. Subsequently, the licensees have established the implementation plans for resolution of the action items. By the implementation of the action items, the possibility of severe accident due to the extreme hazards has been greatly reduced and the capabilities to mitigate the severe accident, should it occur, have been upgraded. To improve the consistency and predictability of the regulation on severe accidents, Nuclear Safety and Security Commission (NSSC) the regulatory body in Korea, is revising the regulatory framework for severe accidents. The new framework will require the licensee to enhance the capabilities for prevention and mitigation of severe accidents in view of the defence in depth principle, to assess the radiological effects from the severe accidents, and to improve current accident management procedures and guidelines necessary for the prevention and mitigation of severe accidents. This rulemaking also considers the safety principles provided by the IAEA Vienna Declaration in 2015, which require new NPPs to prevent large radioactive releases. (author)

Global Banking System Regulatory Environment

Directory of Open Access Journals (Sweden)

Oleh Mozhovyi

2017-03-01

Full Text Available The international and domestic experience shows that the main factors of financial destabilization during the financial crises are in the banking sector. The article reveals that the vulnerability of the financial system is connected with functions, deposit and credit transactions, risks distribution and ensuring liquidity; banks act as a major factor in stabilisation measures in the current context of globalization processes, since the economic stability of banking activities relates directly to all the entities and only stable banking system can withstand the crisis phenomena. Therefore, as a result of the analysis, it is proved that not only reduction of risks of banks is needed, but also introduction of the effective supervision system over implementation of the requirements and standards to prevent these risks. According to modern international approaches, banks use the so-called prudential supervision, which is based on the risk management assessment policy on the part of the Bank’s management, and regulatory bodies contribute to implementation of such policy. The authors have concluded that not only modern specificity of banks, but also the impact of supervision systems and regulation of modern trends in development of the banking should be analysed. Application of the general regulatory principles and banking risks methodology is required. The task of supervision is distribution of reliable risk management practices in the banking system, taking into account national peculiarities of development.

Regulatory Issues Surrounding Merchant Interconnection

International Nuclear Information System (INIS)

Kuijlaars, Kees-Jan; Zwart, Gijsbert

2003-11-01

We discussed various issues concerning the regulatory perspective on private investment in interconnectors. One might claim that leaving investment in transmission infrastructure to competing market parties is more efficient than relying on regulated investment only (especially in the case of long (DC) lines connecting previously unconnected parts of the grids, so that externalities from e.g. loop flows do not play a significant role). We considered that some aspects of interconnection might reduce these market benefits. In particular, the large fixed costs of interconnection construction may lead to significant under investment (due to both first mover monopoly power and the fact that part of generation cost efficiencies realised by interconnection are not captured by the investor itself, and remain external to the investment decision). Second, merchant ownership restricts future opportunities for adaptation of regulation, as would be required e.g. for introduction of potentially more sophisticated methods of congestion management or market splitting. Some of the disadvantages of merchant investment may be mitigated however by a suitable regulatory framework, and we discussed some views in this direction. The issues we discussed are not intended to give a complete framework, and detailed regulation will certainly involve many more specific requirements. Areas we did not touch upon include e.g. the treatment of deep connection costs, rules for operation and maintenance of the line, and impact on availability of capacity on other interconnections

CFD analyses in regulatory practice

International Nuclear Information System (INIS)

Bloemeling, F.; Pandazis, P.; Schaffrath, A.

2012-01-01

Numerical software is used in nuclear regulatory procedures for many problems in the fields of neutron physics, structural mechanics, thermal hydraulics etc. Among other things, the software is employed in dimensioning and designing systems and components and in simulating transients and accidents. In nuclear technology, analyses of this kind must meet strict requirements. Computational Fluid Dynamics (CFD) codes were developed for computing multidimensional flow processes of the type occurring in reactor cooling systems or in containments. Extensive experience has been accumulated by now in selected single-phase flow phenomena. At the present time, there is a need for development and validation with respect to the simulation of multi-phase and multi-component flows. As insufficient input by the user can lead to faulty results, the validity of the results and an assessment of uncertainties are guaranteed only through consistent application of so-called Best Practice Guidelines. The authors present the possibilities now available to CFD analyses in nuclear regulatory practice. This includes a discussion of the fundamental requirements to be met by numerical software, especially the demands upon computational analysis made by nuclear rules and regulations. In conclusion, 2 examples are presented of applications of CFD analysis to nuclear problems: Determining deboration in the condenser reflux mode of operation, and protection of the reactor pressure vessel (RPV) against brittle failure. (orig.)

Regulatory Issues Surrounding Merchant Interconnection

Energy Technology Data Exchange (ETDEWEB)

Kuijlaars, Kees-Jan; Zwart, Gijsbert [Office for Energy Regulation (DTe), The Hague (Netherlands)

2003-11-01

We discussed various issues concerning the regulatory perspective on private investment in interconnectors. One might claim that leaving investment in transmission infrastructure to competing market parties is more efficient than relying on regulated investment only (especially in the case of long (DC) lines connecting previously unconnected parts of the grids, so that externalities from e.g. loop flows do not play a significant role). We considered that some aspects of interconnection might reduce these market benefits. In particular, the large fixed costs of interconnection construction may lead to significant under investment (due to both first mover monopoly power and the fact that part of generation cost efficiencies realised by interconnection are not captured by the investor itself, and remain external to the investment decision). Second, merchant ownership restricts future opportunities for adaptation of regulation, as would be required e.g. for introduction of potentially more sophisticated methods of congestion management or market splitting. Some of the disadvantages of merchant investment may be mitigated however by a suitable regulatory framework, and we discussed some views in this direction. The issues we discussed are not intended to give a complete framework, and detailed regulation will certainly involve many more specific requirements. Areas we did not touch upon include e.g. the treatment of deep connection costs, rules for operation and maintenance of the line, and impact on availability of capacity on other interconnections.

National legislative and regulatory activities

International Nuclear Information System (INIS)

2015-01-01

This section treats of the following National legislative and regulatory activities: 1 - Australia: General legislation - Bill to amend the Australian Radiation Protection and Nuclear Safety Act 1998; 2 - France: General legislation - Law No. 2015-992 of 17 August 2015 on the energy transition for green growth; ASN Report on the state of nuclear safety and radiation protection in France in 2014; 3 - Germany: Radioactive waste management - First Ordinance to amend the 2005 Gorleben Development Freeze Ordinance (2015); 4 - Greece: Radioactive waste management - Joint Ministerial Decision establishing the national policy on the management of spent fuel and radioactive waste; 5 - Lithuania: Nuclear safety and radiological protection - Revised requirements for modifications, Plan for enhancement of nuclear safety, New requirements for the commissioning of nuclear power plants, Revised requirements regulating the provision of information on abnormal events; Radioactive waste management - Revised requirements for acceptance criteria for near surface repository; Nuclear security - Revised requirements for physical protection; 6 - Romania: Licensing and regulatory infrastructure - Government Decision No. 600/2014 for approval of National Nuclear Safety and Security; International co-operation - Government Decision No. 525/2014 for approval of the Co-operation Agreement on the radioactive waste management between the French National Radioactive Waste Management Agency (ANDRA) and Nuclear Agency and Radioactive Waste (ANDR) Strategy; Memorandum of Understanding for Co-operation and Exchange of Information in Nuclear Regulatory Matters between the National Commission for Nuclear Activities Control (CNCAN) of Romania and the President of National Atomic Energy Agency (PAA) of Poland; Government Decision No. 540/2015 for approval of the Agreement between the Government of Romania and the Government of the People's Republic of China regarding co-operation in the peaceful

Regulatory Oversight of Safety Culture in Finland: A Systemic Approach to Safety

International Nuclear Information System (INIS)

Oedewald, P.; Väisäsvaara, J.

2016-01-01

In Finland the Radiation and Nuclear Safety Authority STUK specifies detailed regulatory requirements for good safety culture. Both the requirements and the practical safety culture oversight activities reflect a systemic approach to safety: the interconnections between the technical, human and organizational factors receive special attention. The conference paper aims to show how the oversight of safety culture can be integrated into everyday oversight activities. The paper also emphasises that the scope of the safety culture oversight is not specific safety culture activities of the licencees, but rather the overall functioning of the licence holder or the new build project organization from safety point of view. The regulatory approach towards human and organizational factors and safety culture has evolved throughout the years of nuclear energy production in Finland. Especially the recent new build projects have highlighted the need to systematically pay attention to the non-technical aspects of safety as it has become obvious how the HOF issues can affect the design processes and quality of construction work. Current regulatory guides include a set of safety culture related requirements. The requirements are binding to the licence holders and they set both generic and specific demands on the licencee to understand, monitor and to develop safety culture of their own organization but also that of their supplier network. The requirements set for the licence holders has facilitated the need to develop the regulator’s safety culture oversight practices towards a proactive and systemic approach.

Radioactive material package test standards and performance requirements - public perception

International Nuclear Information System (INIS)

Pope, R.B.; Shappert, L.B.; Rawl, R.R.

1992-01-01

This paper addresses issues related to the public perception of the regulatory test standards and performance requirements for packaging and transporting radioactive material. Specifically, it addresses the adequacy of the package performance standards and testing for Type B packages, which are those packages designed for transporting the most hazardous quantities and forms of radioactive material. Type B packages are designed to withstand accident conditions in transport. To improve public perception, the public needs to better understand: (a) the regulatory standards and requirements themselves, (b) the extensive history underlying their development, and (c) the soundness of the technical foundation. The public needs to be fully informed on studies, tests, and analyses that have been carried out worldwide and form the basis of the regulatory standards and requirements. This paper provides specific information aimed at improving the public perception of packages test standards

Regulatory issues resolved through design certification on the System 80+trademark standard plant design

International Nuclear Information System (INIS)

Ritterbusch, S.E.; Brinkman, C.B.

1996-01-01

The US Nuclear Regulatory Commission (NRC) has completed its review of the System 80+trademark Standard Plant Design, approving advanced design features and closing severe accident licensing issues. Final Design Approval was granted in July 1994. The NRC review was extensive, requiring written responses to over 4,950 questions and formal printing of over 50,000 Safety Analysis Report pages. New safety issues never before addressed in a regulatory atmosphere had to be resolved with detailed analysis and evaluation of design features. the System 80+ review demonstrated that regulatory issues can be firmly resolved only through presentation of a detailed design and completion of a comprehensive regulatory review

Animal testing, 3R models and regulatory acceptance : Technology transition in a risk-averse context

NARCIS (Netherlands)

Schiffelers, M.J.W.A.

2016-01-01

Risk avoidance has resulted in a broad range of regulations to guarantee the safety of products such as pharmaceuticals and chemicals. Many of these regulations rely on animal tests. About 3 million laboratory animals are used annually in Europe to meet such regulatory requirements.Regulatory animal

Environmental challenges and opportunities of the evolving North American electricity market : European electricity generating facilities: an overview of European regulatory requirements and standardization efforts

International Nuclear Information System (INIS)

Nichols, L.

2002-06-01

Several factors are affecting power generating facilities, such as the opening of both electricity and gas markets, and the pressure applied on generators and governments to ensure a steady energy supply for consumers. An additional factor is the pressure for the closing of nuclear power facilities. European siting and emissions requirements for coal-fired and natural gas generating facilities were presented in this background paper. In addition, the author provided an overview of the standardization process in place in Europe. The European Union and its functioning were briefly described, as well as a listing of relevant organizations. The current trends were examined. The document first introduced the European Union, and the next section dealt with Regulatory regime: the internal energy market. The third section examined the issue of Regulatory regime: generation and environmental regulations. Section four presented environmental management systems, followed by a section on standardization. Section six discussed European organizations involved in electricity issues, while the following section dealt with European commission programs. The last section briefly looked at the trends in the electricity sector, broaching topics such as compliance, electricity generation, and emissions trading. 52 refs., 2 tabs

RNA-ID, a Powerful Tool for Identifying and Characterizing Regulatory Sequences.

Science.gov (United States)

Brule, C E; Dean, K M; Grayhack, E J

2016-01-01

The identification and analysis of sequences that regulate gene expression is critical because regulated gene expression underlies biology. RNA-ID is an efficient and sensitive method to discover and investigate regulatory sequences in the yeast Saccharomyces cerevisiae, using fluorescence-based assays to detect green fluorescent protein (GFP) relative to a red fluorescent protein (RFP) control in individual cells. Putative regulatory sequences can be inserted either in-frame or upstream of a superfolder GFP fusion protein whose expression, like that of RFP, is driven by the bidirectional GAL1,10 promoter. In this chapter, we describe the methodology to identify and study cis-regulatory sequences in the RNA-ID system, explaining features and variations of the RNA-ID reporter, as well as some applications of this system. We describe in detail the methods to analyze a single regulatory sequence, from construction of a single GFP variant to assay of variants by flow cytometry, as well as modifications required to screen libraries of different strains simultaneously. We also describe subsequent analyses of regulatory sequences. © 2016 Elsevier Inc. All rights reserved.

Tracking of time-varying genomic regulatory networks with a LASSO-Kalman smoother

OpenAIRE

Khan, Jehandad; Bouaynaya, Nidhal; Fathallah-Shaykh, Hassan M

2014-01-01

It is widely accepted that cellular requirements and environmental conditions dictate the architecture of genetic regulatory networks. Nonetheless, the status quo in regulatory network modeling and analysis assumes an invariant network topology over time. In this paper, we refocus on a dynamic perspective of genetic networks, one that can uncover substantial topological changes in network structure during biological processes such as developmental growth. We propose a novel outlook on the inf...

Regulatory RNA design through evolutionary computation and strand displacement.

Science.gov (United States)

Rostain, William; Landrain, Thomas E; Rodrigo, Guillermo; Jaramillo, Alfonso

2015-01-01

The discovery and study of a vast number of regulatory RNAs in all kingdoms of life over the past decades has allowed the design of new synthetic RNAs that can regulate gene expression in vivo. Riboregulators, in particular, have been used to activate or repress gene expression. However, to accelerate and scale up the design process, synthetic biologists require computer-assisted design tools, without which riboregulator engineering will remain a case-by-case design process requiring expert attention. Recently, the design of RNA circuits by evolutionary computation and adapting strand displacement techniques from nanotechnology has proven to be suited to the automated generation of DNA sequences implementing regulatory RNA systems in bacteria. Herein, we present our method to carry out such evolutionary design and how to use it to create various types of riboregulators, allowing the systematic de novo design of genetic control systems in synthetic biology.

Regulatory Acceptance of Alternative Methods in the Development and Approval of Pharmaceuticals.

Science.gov (United States)

Beken, Sonja; Kasper, Peter; van der Laan, Jan-Willem

Animal studies may be carried out to support first administration of a new medicinal product to either humans or the target animal species, or before performing clinical trials in even larger populations, or before marketing authorisation, or to control quality during production. Ethical and animal welfare considerations require that animal use is limited as much as possible. Directive 2010/63/EU on the protection of animals used for scientific purposes unambiguously fosters the application of the principle of the 3Rs when considering the choice of methods to be used.As such, today, the 3Rs are embedded in the relevant regulatory guidance both at the European (European Medicines Agency (EMA)) and (Veterinary) International Conference on Harmonization ((V)ICH) levels. With respect to non-clinical testing requirements for human medicinal products, reduction and replacement of animal testing has been achieved by the regulatory acceptance of new in vitro methods, either as pivotal, supportive or exploratory mechanistic studies. Whilst replacement of animal studies remains the ultimate goal, approaches aimed at reducing or refining animal studies have also been routinely implemented in regulatory guidelines, where applicable. The chapter provides an overview of the implementation of 3Rs in the drafting of non-clinical testing guidelines for human medicinal products at the level of the ICH. In addition, the revision of the ICH S2 guideline on genotoxicity testing and data interpretation for pharmaceuticals intended for human use is discussed as a case study.In October 2010, the EMA established a Joint ad hoc Expert Group (JEG 3Rs) with the mandate to improve and foster the application of 3Rs principles to the regulatory testing of medicinal products throughout their lifecycle. As such, a Guideline on regulatory acceptance of 3R testing approaches was drafted that defines regulatory acceptance and provides guidance on the scientific and technical criteria for regulatory

75 FR 11166 - Joint Meeting of the Nuclear Regulatory Commission and the Federal Energy Regulatory Commission...

Science.gov (United States)

2010-03-10

... the Nuclear Regulatory Commission and the Federal Energy Regulatory Commission; Notice of Joint Meeting of the Nuclear Regulatory Commission and the Federal Energy Regulatory Commission March 2, 2010. The Federal Energy Regulatory Commission (FERC) and the Nuclear Regulatory Commission (NRC) will hold...

77 FR 52096 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Order Approving a Proposed Rule Change, as...

Science.gov (United States)

2012-08-28

...'s rules, the financial and regulatory risk management controls and supervisory procedures required...-Regulatory Organizations; EDGX Exchange, Inc.; Order Approving a Proposed Rule Change, as Modified by... that broker-dealers appropriately control the risks associated with market access, so as not to...

Regulatory Challenges for Cartilage Repair Technologies.

Science.gov (United States)

McGowan, Kevin B; Stiegman, Glenn

2013-01-01

In the United States, few Food and Drug Administration (FDA)-approved options exist for the treatment of focal cartilage and osteochondral lesions. Developers of products for cartilage repair face many challenges to obtain marketing approval from the FDA. The objective of this review is to discuss the necessary steps for FDA application and approval for a new cartilage repair product. FDA Guidance Documents, FDA Panel Meetings, scientific organization recommendations, and clinicaltrials.gov were reviewed to demonstrate the current thinking of FDA and the scientific community on the regulatory process for cartilage repair therapies. Cartilage repair therapies can receive market approval from FDA as medical devices, drugs, or biologics, and the specific classification of product can affect the nonclinical, clinical, and regulatory strategy to bring the product to market. Recent FDA guidance gives an outline of the required elements to bring a cartilage repair product to market, although these standards are often very general. As a result, companies have to carefully craft their study patient population, comparator group, and clinical endpoint to best showcase their product's attributes. In addition, regulatory strategy and manufacturing process validation need to be considered early in the clinical study process to allow for timely product approval following the completion of clinical study. Although the path to regulatory approval for a cartilage repair therapy is challenging and time-consuming, proper clinical trial planning and attention to the details can eventually save companies time and money by bringing a product to the market in the most expeditious process possible.

Regulatory Considerations for Gene Therapy Products in the US, EU, and Japan.

Science.gov (United States)

Halioua-Haubold, Celine-Lea; Peyer, James G; Smith, James A; Arshad, Zeeshaan; Scholz, Matthew; Brindley, David A; MacLaren, Robert E

2017-12-01

Developers of gene therapy products (GTPs) must adhere to additional regulation beyond that of traditional small-molecule therapeutics, due to the unique mechanism-of-action of GTPs and the subsequent novel risks arisen. We have provided herein a summary of the regulatory structure under which GTPs fall in the United States, the European Union, and Japan, and a comprehensive overview of the regulatory guidance applicable to the developer of GTP. Understanding the regulatory requirements for seeking GTP market approval in these major jurisdictions is crucial for an effective and expedient path to market. The novel challenges facing GTP developers is highlighted by a case study of alipogene tiparvovec (Glybera).

Structure and drafting of safeguards regulatory documents

International Nuclear Information System (INIS)

Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

1977-09-01

Improving communication of NRU's requirements is the subject of this study. This summary is organized in terms of four decisions on whether safeguards regulatory documents as communication instruments should be an explicit NRC program, what communication methods should be focused on, what actions are feasible and desirable, and how should the NRC divide its effort and resources among desirable actions

What factors facilitate regulatory competence in supervising the safety of nuclear technology?

International Nuclear Information System (INIS)

Mishar, Marina

2012-01-01

The proposed utilization of nuclear energy for electricity generation as the alternative energy source requires Atomic Energy Licensing Board (AELB), the Malaysian nuclear regulatory body taking key role in supervising the safety of the program. This study looked into factors influencing the competency of current AELB human resource as technical competency has been identified as one of the main contributors to the success of a civil nuclear power program. The four quadrant competency model developed by International Atomic Energy Agency was utilized as the required competency. A comprehensive study on 81 personnel from five states in different geographic regions of the country were carried out to investigate the impact of six factors related to competency (educational level, years of working experience, trainings attended, participation in technical committees, numbers of technical papers written and number of technical presentation presented) on four dependent measures in the areas of regulatory competency (legal basis, technical disciplines, regulatory practices and personal and interpersonal effectiveness). Multiple regression (method enter) identified factors that had significant contribution to level of competency while stepwise regression resulted in identifying predictors to enhance competencies. Results were mixed but each of the independent factors is a predictor to different competencies. This study had identified the best predictors that could significantly contribute to the enhancement of regulatory. (author)

Nuclear energy research initiative, an overview of the cooperative program for the risk-informed assessment of regulatory and design requirements for future nuclear power plants

International Nuclear Information System (INIS)

Ritterbusch, Stanley E.

2000-01-01

EPRI sstudies have shown that nuclear plant capital costs will have to decrease by about 35% to 40% to be competitive with fossil-generated electricity in the Unite States. Also, the ''first concrete'' to fuel load construction schedule will have to be decreased to less than 40 months. Therefore, the U. S. Department of Energy (DOE) initiate the Nuclear Energy Research Initiative (NERI) and ABB CENP proposed a cooperative program with Sandia National Laboratory (SNL) and Duke Engineering and Services (DE and S) to begin an innovative research effort to drastically cut the cost of new nuclear power plant construction for the U. S. de-regulated market place. This program was approved by the DOE through three separate but coordinated ''cooperative agreements.'' They are the ''Risk-Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants'' (Risk-Informed NPP), the ''Smart Nuclear Power Plant Program'' (Smart-NPP), and ''Design, Procure, Construct, Install and Test'' (DPCIT) Program. DOE funded the three cooperative agreements at a level of $2.6 million for the first year of the program. Funding for the complete program is durrently at a level $6.9 million, however, ABB CENP and all partners anticipate that the scope of the NERI program will be increased as a result of the overall importance of NERI to the U. S. Government. The Risk-Informed NPP program, which is aimed at revising costly regularory and design requirements without reducing overall plant safety, has two basic tasks: ''development of Risk-Informed Methods'' and ''strengthening the Reliability Database.'' The overall objective of the first task is to develop a scientific, risk-informed approach for identifying and simplifying deterministic industry standards, regulatory requirements, and safety systems that do not significantly contribute to nuclear power plant reliability and safety. The second basic task is to develop a means for strengthening the reliability database

The regulatory application of authorization in radiological protection

International Nuclear Information System (INIS)

Lazo, T.; Frullani, S.

2004-01-01

Authorization is the process used by governments and regulatory authorities to decide what regulatory controls or conditions, if any, should be applied to radioactive sources or radiation exposure situations in order to protect the public, workers and the environment appropriately. Over the years, governments and regulatory authorities have used various approaches to the authorization process under differing circumstances. Now, with the new draft recommendations from the International Commission on Radiological Protection (ICRP), there is the prospect of being able to use a single, simple and self-coherent approach for the process of regulatory authorization under all circumstances. Previously, the ICRP recommended the use of various approaches to manage radiological protection situations. For what were called practices, exposures were subject to limits, and optimisation was required below these limits. What were called interventions were subject to intervention levels, above which some action could be considered justified, and which should be optimised based on consideration of how much dose could be averted by the countermeasure considered. Radon in homes was subject to action levels, above which some sort of countermeasure could be recommended. These approaches are all philosophically distinct and logically constructed, but their differences, particularly in the types of numerical criteria used (limits, intervention levels, action levels, etc.) contributed to confusion and misunderstanding. (author)

Public Perceptions of Regulatory Costs, Their Uncertainty and Interindividual Distribution.

Science.gov (United States)

Johnson, Branden B; Finkel, Adam M

2016-06-01

Public perceptions of both risks and regulatory costs shape rational regulatory choices. Despite decades of risk perception studies, this article is the first on regulatory cost perceptions. A survey of 744 U.S. residents probed: (1) How knowledgeable are laypeople about regulatory costs incurred to reduce risks? (2) Do laypeople see official estimates of cost and benefit (lives saved) as accurate? (3) (How) do preferences for hypothetical regulations change when mean-preserving spreads of uncertainty replace certain cost or benefit? and (4) (How) do preferences change when unequal interindividual distributions of hypothetical regulatory costs replace equal distributions? Respondents overestimated costs of regulatory compliance, while assuming agencies underestimate costs. Most assumed agency estimates of benefits are accurate; a third believed both cost and benefit estimates are accurate. Cost and benefit estimates presented without uncertainty were slightly preferred to those surrounded by "narrow uncertainty" (a range of costs or lives entirely within a personally-calibrated zone without clear acceptance or rejection of tradeoffs). Certain estimates were more preferred than "wide uncertainty" (a range of agency estimates extending beyond these personal bounds, thus posing a gamble between favored and unacceptable tradeoffs), particularly for costs as opposed to benefits (but even for costs a quarter of respondents preferred wide uncertainty to certainty). Agency-acknowledged uncertainty in general elicited mixed judgments of honesty and trustworthiness. People preferred egalitarian distributions of regulatory costs, despite skewed actual cost distributions, and preferred progressive cost distributions (the rich pay a greater than proportional share) to regressive ones. Efficient and socially responsive regulations require disclosure of much more information about regulatory costs and risks. © 2016 Society for Risk Analysis.

Carbon Capture and Storage Legal and Regulatory Review. Edition 3

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The International Energy Agency (IEA) considers carbon capture and storage (CCS) a crucial part of worldwide efforts to limit global warming by reducing greenhouse-gas emissions. The IEA estimates that emissions can be reduced to a level consistent with a 2°C global temperature increase through the broad deployment of low-carbon energy technologies – and that CCS would contribute about one-fifth of emission reductions in this scenario. Achieving this level of deployment will require that regulatory frameworks – or rather a lack thereof – do not unnecessarily impede environmentally safe demonstration and deployment of CCS, so in October 2010 the IEA launched the IEA Carbon Capture and Storage Legal and Regulatory Review. The CCS Review is a regular review of CCS regulatory progress worldwide. Produced annually, it collates contributions by national and regional governments, as well as leading organisations engaged in CCS regulatory activities, to provide a knowledge-sharing forum to support CCS framework development. Each two page contribution provides a short summary of recent and anticipated CCS regulatory developments and highlights a particular, pre-nominated regulatory theme. To introduce each edition, the IEA provides a brief analysis of key advances and trends, based on the contributions submitted. The theme for this third edition is stakeholder engagement in the development of CO2 storage projects. Other issues addressed include: regulating CO2-EOR, CCS and CO2-EOR for storage; CCS incentive policy; key, substantive issues being addressed by jurisdictions taking steps to finalise CCS regulatory framework development; and CCS legal and regulatory developments in the context of the Clean Energy Ministerial Carbon Capture, Use and Storage Action Group.

Task-based dermal exposure models for regulatory risk assessment

NARCIS (Netherlands)

Warren, N.D.; Marquart, H.; Christopher, Y.; Laitinen, J.; Hemmen, J.J. van

2006-01-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of

75 FR 63878 - Self-Regulatory Organizations; Self-Regulatory Organizations; Notice of Filing and Immediate...

Science.gov (United States)

2010-10-18

...-Regulatory Organizations; Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of...(b)(1). \\2\\ 17 CFR 240.19b-4. I. Self-Regulatory Organization's Statement of the Terms of Substance... Public Reference Room. II. Self-Regulatory Organization's Statement of the Purpose of, and Statutory...

Veterinary applications of ionising radiation HERCA Task Force on Veterinary Applications. Main results of the Questionnaire 'National regulatory requirements with regard to veterinary medical applications of ionising radiation' and conclusions of the TF

International Nuclear Information System (INIS)

Van Bladel, Lodewijk; Berlamont, Jolien; Michalczak, Herbert; Balogh, Lajos; Peremans, Kathelijne

2013-11-01

In the fall of 2012, the subject of radiation protection in veterinary medicine was raised during the meeting of the HERCA Board. Issues with regard to this subject had been brought to the attention of HERCA by the European College of Veterinary Diagnostic Imaging (ECVDI). In October 2012, the Board decided to charge a small Task Force (TF) to further explore the issues in this field. This TF drew up a questionnaire which looked at the general radiation protection regulatory requirements in veterinary medicine applications of ionizing radiation. The results of this study showed large differences in the requirements applicable in the HERCA member countries. The TF also noticed the increasing use of more complex imaging procedures and of different radio-therapeutic modalities, which may imply greater risks of exposure of humans to ionising radiation. These results were presented during the HERCA Board meeting in Berlin, Germany and on which the Board decided to establish a Working Group on veterinary applications of ionising radiations (WG Vet). The main results of the Questionnaire 'National regulatory requirements with regard to veterinary medicine applications of ionising radiation' is attached in Appendix

Time-Varying Capital Requirements and Disclosure Rules

DEFF Research Database (Denmark)

Imbierowicz, Björn; Kragh, Jonas; Rangvid, Jesper

2018-01-01

We investigate how banks' capital and lending decisions respond to changes in bank-specific capital and disclosure requirements. We find that an increase in the bank-specific regulatory capital requirement results in a higher bank capital ratio, brought about via less asset risk. A decrease...

Strategies for environmental restoration in an evolving regulatory environment

International Nuclear Information System (INIS)

Keller, J.F.; Geffen, C.A.

1990-03-01

The US Department of Energy (DOE) is faced with the immense challenge of effectively implementing a program to mitigate and manage the environmental impacts created by past and current operations at its facilities. Such a program must be developed and administered in accordance with the Comprehensive Environmental Response, Compensation and Liability Act and the Resource Conservation and Recovery Act. These regulations are extremely complex, burdening the environmental restoration process with a number of planning and public interaction requirements that must be met before remediation of a site may begin. Existing regulatory and institutional requirements for environmental restoration dictate that extensive planning, characterization and assessment activities be conducted. An important part of the process is the involvement of regulators and the public in the site characterization and assessment activities and in developing reasonable solutions for cleanup. This paper identifies the regulatory requirements and highlights implementation strategies for key aspects of the environmental restoration process for DOE. Trends in legislation and policy relevant to the DOE environmental restoration process are highlighted, with strategies identified for dealing with the evolution of the regulations while maintaining continuity in the technical activities required for cleaning up the DOE hazardous and mixed waste sites. 10 refs