78 FR 54517 - Water Quality Standards Regulatory Clarifications

Science.gov (United States)

2013-09-04

... 131 Water Quality Standards Regulatory Clarifications; Proposed Rule #0;#0;Federal Register / Vol. 78... AGENCY 40 CFR Part 131 [EPA-HQ-OW-2010-0606; FRL-9839-7] RIN 2040-AF 16 Water Quality Standards... Environmental Protection Agency (EPA) is proposing changes to the federal water quality standards (WQS...

Below regulatory concern standards: The limits of state and local authority

International Nuclear Information System (INIS)

Silverman, D.J.

1990-01-01

The paper discusses: (1) the scope of the Nuclear Regulatory Commission's authority to develop and implement below regulatory concern or BRC standards; and (2) the limitations on the legal authority of states and local governments to create impediments to full implementation of such standards. The paper demonstrates that the NRC is acting well within its statutory authority in developing BRC regulations and guidelines, and that the ability of state and local governments to impede generators' use of those regulations and guidelines on the basis of legal or regulatory initiatives is substantially circumscribed. While some generators may be reluctant, as a result of political factors, to utilize BRC standards, the decision whether or not to use such standards should not be made without careful consideration of the applicable legal and regulatory limitations on state and local authority

7 CFR 371.5 - Marketing and Regulatory Programs Business Services.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Marketing and Regulatory Programs Business Services... AUTHORITY § 371.5 Marketing and Regulatory Programs Business Services. (a) General statement. Marketing and Regulatory Programs Business Services (MRPBS) plans and provides for the agency's human, financial, and...

77 FR 33253 - Regulatory Guide 8.33, Quality Management Program

Science.gov (United States)

2012-06-05

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0126] Regulatory Guide 8.33, Quality Management Program... Regulatory Commission (NRC or Commission) is withdrawing Regulatory Guide (RG) 8.33, ``Quality Management... Quality Management Program was deleted from the regulations as part of an overall revision in 2002 of the...

Regulatory research program for 1987/88

International Nuclear Information System (INIS)

1987-01-01

The regulatory research program of Canada's Atomic Energy Control Board (AECB) is intended to augment the AECB's research program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program covers the following areas: the safety of nuclear facilities, radioactive waste management, health physics, physical security, and the development of regulatory processes. Sixty-seven projects are planned for 1987/88; as well, there are some projects held in reserve in case funding becomes available. This information bulletin contains a list of the projects with a brief description of each

Building objectives and incorrect use of regulatory standards

Directory of Open Access Journals (Sweden)

Sůra Miroslav

2018-01-01

Full Text Available European and other regulatory standards affect, besides everyday life, also planning, designing, and other building processes. Regulations alter, sometimes threaten, or even completely prevent, the achievement of the intended objectives of investors and other participants in building processes. Implementation of regulative standards may result in problems that cause various defects to planning-design-construction objectives. Such regulatory issues are known to have already caused ethical, social and financial burdens in other areas of human activity. In planning and construction processes, various participants may be the source of misuse problems – unintentionally or otherwise. A model of categories of problems is presented (and has been tested – of misuse problems that result from potential conflicts between (EU regulatory standards and objectives of participants in building processes. The categories have been compiled and compared also according to sources and actors of the problems. Protective strategies against incorrect application and/or misuse of regulations are in the process of formulation and verification, taking into account sources and actors in the problem categories. Finally, it helps and protects participants – especially as regards matters of technology, design phase, public attitudes, and money.

77 FR 25868 - Iowa Regulatory Program

Science.gov (United States)

2012-05-02

... reference of applicable portions of 30 CFR part 700 to End from the July 1, 2002, version to the July 1, 2010, version. Additionally, Iowa proposed to revise its Program related to ownership and control by... the Iowa regulatory program (Iowa program) under the Surface Mining Control and Reclamation Act of...

Information resources in state regulatory agencies-a California perspective

Energy Technology Data Exchange (ETDEWEB)

DiZio, S.M. [California Environmental Protection Agency, Sacramento (United States)

1990-12-31

Various state regulatory agencies have expressed a need for networking with information gatherers/researchers to produce a concise compilation of primary information so that the basis for regulatory standards can be scientifically referenced. California has instituted several programs to retrieve primary information, generate primary information through research, and generate unique regulatory standards by integrating the primary literature and the products of research. This paper describes these programs.

Regulatory research and support program for 1989/90

International Nuclear Information System (INIS)

1989-01-01

The Regulatory Research and Support Program is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into eight main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 83 projects are planned for 1989/90, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed. Most of the projects will be carried out under contracts issued through the Department of Supply and Services. This Information Bulletin contains a list of the projects with a brief description of each, and additional supporting information

Methodologies for evaluation of AECB regulatory program

International Nuclear Information System (INIS)

Yarranton, G.A.; Gray, B.J.; Yarranton, M.

1986-05-01

AECB (Atomic Energy Control Board) commissioned this report to obtain information about methods of planning and conducting evaluation of its regulatory program. The report begins with a bibliography consisting of 280 abstracts assembled from an extensive search of international literature. Each cited publication describes or uses methods applicable to the evaluation of regulatory programs. The report continues with a review of the methodologies found in the literature. It identifies the most relevant references for each step in program evaluation: the commissioning of evaluation; the identification of evaluation issues; the defining of questions; the answering of questions; the reporting of reslts, and the implementation of recommendations. Finally, the report examines the applicability, advantages and disadvantages of the different evaluation methods and makes recommendations about the selection of methods and their application to the AECB program

Regulatory oversight strategy for chemistry program at Canadian nuclear power plants

International Nuclear Information System (INIS)

Kameswaran; Ram

2012-09-01

Chemistry program is one of the essential programs for the safe operation of a nuclear power plant. It helps to ensure the necessary integrity, reliability and availability of plant structures, systems and components important to safety. Additionally, the program plays an important role in asset preservation, limiting radiation exposure and environmental protection. A good chemistry program will minimize corrosion of materials, reduce activation products, minimize of the buildup of radioactive material leading to occupational radiation exposure and it helps limit the release of chemicals and radioactive materials to the environment. The legal basis for the chemistry oversight at Canadian NPPs is established by the Nuclear Safety and Control Act and its associated regulations. It draws on the Canadian Nuclear Safety Commission's regulatory framework and NPP operating license conditions that include applicable standards such as CAN/CSA N286-05 Management System Requirements for Nuclear Power Plants. This paper focuses on the regulatory oversight strategy used in Canada to assess the performance of chemistry program at the nuclear power plants (NPPs) licensed by CNSC. The strategy consists of a combination of inspection and performance monitoring activities. The activities are further supported from information gathered through staff inspections of cross-cutting areas such as maintenance, corrective-action follow-ups, event reviews and safety related performance indicators. (authors)

Regulatory activities

International Nuclear Information System (INIS)

2001-01-01

This publication, compiled in 8 chapters, presents the regulatory system developed by the Nuclear Regulatory Authority (NRA) of the Argentine Republic. The following activities and developed topics in this document describe: the evolution of the nuclear regulatory activity in Argentina; the Argentine regulatory system; the nuclear regulatory laws and standards; the inspection and safeguards of nuclear facilities; the emergency systems; the environmental systems; the environmental monitoring; the analysis laboratories on physical and biological dosimetry, prenatal irradiation, internal irradiation, radiation measurements, detection techniques on nuclear testing, medical program on radiation protection; the institutional relations with national and international organization; the training courses and meeting; the technical information

The development of AECB regulatory documents

International Nuclear Information System (INIS)

Joyce, M.

1981-01-01

This document describes the Atomic Energy Control Board's (AECB) approach to the development and preparation of regulatory documents. The principal factors that have shaped the AECB'a regulatory approach are identified as background to the evolution of regulatory documents as are a number of current influences that affect the present and future development of these documents. Also described are the process by which regulatory documents are prepared and published and the points of contact between this process and the Canadian Standards Association program for nuclear standards. (author)

Transcriptional regulatory programs underlying barley germination and regulatory functions of Gibberellin and abscisic acid

Science.gov (United States)

2011-01-01

germination. Those genes and metabolic pathways are likely to be important parts of transcriptional regulatory networks underlying GA and ABA regulation of seed germination and seedling growth. Conclusions The studies developed a model depicting transcriptional regulatory programs underlying barley germination and GA and ABA regulation of germination at gene, pathway and systems levels, and established a standard transcriptome reference for further integration with various -omics and biological data to illustrate biological networks underlying seed germination. The studies also generated a great amount of systems biological evidence for previously proposed hypotheses, and developed a number of new hypotheses on transcriptional regulation of seed germination for further experimental validation. PMID:21668981

Transcriptional regulatory programs underlying barley germination and regulatory functions of Gibberellin and abscisic acid

Directory of Open Access Journals (Sweden)

Lin Li

2011-06-01

-regulated by both GA and seed germination. Those genes and metabolic pathways are likely to be important parts of transcriptional regulatory networks underlying GA and ABA regulation of seed germination and seedling growth. Conclusions The studies developed a model depicting transcriptional regulatory programs underlying barley germination and GA and ABA regulation of germination at gene, pathway and systems levels, and established a standard transcriptome reference for further integration with various -omics and biological data to illustrate biological networks underlying seed germination. The studies also generated a great amount of systems biological evidence for previously proposed hypotheses, and developed a number of new hypotheses on transcriptional regulation of seed germination for further experimental validation.

U.S. Nuclear Regulatory Commission natural analogue research program

International Nuclear Information System (INIS)

Kovach, L.A.; Ott, W.R.

1995-01-01

This article describes the natural analogue research program of the U.S. Nuclear Regulatory Commission (US NRC). It contains information on the regulatory context and organizational structure of the high-level radioactive waste research program plan. It also includes information on the conditions and processes constraining selection of natural analogues, describes initiatives of the US NRC, and describes the role of analogues in the licensing process

Comparison of ISO 9000 and recent software life cycle standards to nuclear regulatory review guidance

International Nuclear Information System (INIS)

Preckshot, G.G.; Scott, J.A.

1998-01-01

Lawrence Livermore National Laboratory is assisting the Nuclear Regulatory Commission with the assessment of certain quality and software life cycle standards to determine whether additional guidance for the U.S. nuclear regulatory context should be derived from the standards. This report describes the nature of the standards and compares the guidance of the standards to that of the recently updated Standard Review Plan

Regulatory barriers blocking standardization of interoperability.

Science.gov (United States)

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-07-12

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders.

Selected review of regulatory standards and licensing issues for nuclear power plants

International Nuclear Information System (INIS)

Stevenson, J.D.; Thomas, F.A.

1982-11-01

This report presents a compilation and description of current foreign regulatory standards and licensing issues in the areas of interest associated with Siting, Structural Engineering, Metallurgy and Materials, and Mechanical Engineering. In addition, summary comparisons of the requirements of both the US and foreign nuclear power plant regulatory standards are provided. The selected foreign countries surveyed include Canada, France, Japan, Sweden, United Kingdom of Great Britain and Northern Ireland, and the Federal Republic of Germany

Human Factors Regulatory Research Program Plan, FY 1989--FY 1992

International Nuclear Information System (INIS)

Coffman, F.; Persensky, J.; Ryan, T.; Ramey-Smith, A.; Goodman, C.; Serig, D.; Trager, E; Nuclear Regulatory Commission, Washington, DC; Nuclear Regulatory Commission, Washington, DC; Nuclear Regulatory Commission, Washington, DC

1989-10-01

This report describes the currently ongoing (FY 1989) and planned (FY 1989-1992) Human Factors Regulatory Research Program in the NRC Office of Nuclear Regulatory Research (RES). Examples of the influence of human factors on nuclear safety are presented, and the role of personnel is discussed. Current regulatory issues associated with human factors in the nuclear system and the purpose of the research plan are provided. The report describes the research process applied to the human factors research issues and the program activities: Personnel Performance Measurement, Personnel Subsystem, Human-System Interface. Organization and Management, and Reliability Assessment. The research being conducted within each activity is summarized along with the objectives, background information, and expected regulatory products. Budget and personnel forecasts are provided along with a summary of contractors performing some of the ongoing research. Appendices contain a chronology of human factors research at NRC, a description of the research approach, an update on human factors programs and initiatives in RES and other NRC offices, and the integration among these programs. 46 refs., 5 tabs

Determinants of Effective Information Transfer in International Regulatory Standards Adoption

Science.gov (United States)

Popescu, Denisa

2010-01-01

The role of international regulatory standards within the current global environment has become of the most importance. The age of the global system and free market capitalism carried us into the unprecedented age of regulations, and standard setting. Regulations are now becoming the emerging mode of global governance. This study focuses on…

Regulatory research and support program for 1993/1994 - project descriptions

International Nuclear Information System (INIS)

1993-01-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year's program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M

Regulatory research and support program for 1993/1994 - project descriptions

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year`s program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M.

Working group 2: regulatory and standards development

Energy Technology Data Exchange (ETDEWEB)

Bunch, Chad; Lee, Shu; Peters, Mike; Parsonage, Kevin; Saad, Ziad

2011-07-01

This second workshop explored regulatory standards and developments in the pipeline industry. New methods of improved damage prevention for regulators and pipelines to implement were presented. First, incident trends were discussed, using incident analysis to identify the possible causes and solutions of incidents. The determination of realistic goals was attempted. Next, leak detection was discussed with the presentation of current work in annex E which will form part of the new CSA Z662 standard in a few years time. New testing methods such as external methods of leak detection were studied. A third presentation showed the recent development in overpressure protection with reference to the new annex M incorporated in the CSA Z662-11 standard. The last presentation introduced the topic of public safety issues associated with CO2 pipelines with regard to different failure scenarios and the appropriate emergency responses.

NRC review of passive reactor design certification testing programs: Overview and regulatory perspective

International Nuclear Information System (INIS)

Levin, A.E.

1993-01-01

Reactor vendors are developing new designs for future deployment, including open-quotes passiveclose quotes light water reactors (LWRs), such as General Electric's (G.E.'s) simplified boiling water reactor (SBWR) and Westinghouse's AP600, which depend primarily on inherent processes, such as national convection and gravity feed, for safety injection and emergency core cooling. The U.S. Nuclear Regulatory Commission (NRC) has implemented a new process, certification of standardized reactor designs, for licensing these Plants. Part 52 of Title 10 of the Code of Federal Regulations (10CFR52) contains the requirements that vendors must meet for design certification. One important section, 10CFR52.47, reads open-quotes Certification of a standard design which . . . utilizes simplified, inherent, passive, or other innovative means to accomplish its safety functions will be granted only if: (1) The performance of each safety feature of the design has been demonstrated through either analysis, appropriate test programs, experience, or a combination thereof; (2) Interdependent effects among the safety features have been found acceptable by analysis, appropriate test programs, experience, or a combination thereof; and (3) Sufficient data exist on the safety features of the design to assess the analytical tools used for safety analyses. . . . The vendors have initiated programs to test innovative features of their designs and to develop data bases needed to validate their analytical codes, as required by the design certification rule. Accordingly, the NRC is reviewing and evaluating the vendors programs to ensure that they address adequately key issues concerning safety system performance. This paper provides an overview of the NRC's review process and regulatory perspective

75 FR 48525 - Pennsylvania Regulatory Program

Science.gov (United States)

2010-08-10

... maintain jurisdiction of the regulatory program under the Federal Surface Mining Control and Reclamation... Part IV Department of the Interior Office of Surface Mining Reclamation and Enforcement 30 CFR... Surface Mining Reclamation and Enforcement 30 CFR Part 938 [PA-153; Docket ID OSM-2008-0021] Pennsylvania...

Regulatory Oversight Program, July 1, 1993 - March 3, 1997. Volume 1

International Nuclear Information System (INIS)

1997-09-01

On July 1, 1993, a Regulatory Oversight (RO) organization was established within the United States Department of Energy (DOE), Oak Ridge Operations (ORO) to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the RO program was to ensure continued plant safety, safeguards and security while the Paducah and Portsmouth gaseous diffusion plants (GDPs) transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). These activities were performed under the authority of the lease agreement between DOE and USEC until NRC issued a Certificate of Compliance or approved a Compliance Plan pursuant to Section 1701 of the Atomic Energy Act of 1954, as amended, and assumed regulatory responsibility. This report chronicles the formal development, operation and key activities of the RO organization from its beginning in July 1993, until the turnover of the regulatory oversight responsibility to the NRC on March 3, 1997. Through its evolution to closure, the RO program was a formal, proceduralized effort designed to provide consistent regulation and to facilitate transition to NRC. The RO Program was also a first-of-a-kind program for DOE. The process, experience, and lessons learned summarized herein should be useful as a model for transition of other DOE facilities to privatization or external regulation

Regulatory Oversight Program, July 1, 1993--March 3, 1997. Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

On July 1, 1993, a Regulatory Oversight (RO) organization was established within the United States Department of Energy (DOE), Oak Ridge Operations (ORO) to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the RO program was to ensure continued plant safety, safeguards and security while the Paducah and Portsmouth gaseous diffusion plants (GDPs) transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). These activities were performed under the authority of the lease agreement between DOE and USEC until NRC issued a Certificate of Compliance or approved a Compliance Plan pursuant to Section 1701 of the Atomic Energy Act of 1954, as amended, and assumed regulatory responsibility. This report chronicles the formal development, operation and key activities of the RO organization from its beginning in July 1993, until the turnover of the regulatory oversight responsibility to the NRC on March 3, 1997. Through its evolution to closure, the RO program was a formal, proceduralized effort designed to provide consistent regulation and to facilitate transition to NRC. The RO Program was also a first-of-a-kind program for DOE. The process, experience, and lessons learned summarized herein should be useful as a model for transition of other DOE facilities to privatization or external regulation.

Standard guide for establishing a quality assurance program for uranium conversion facilities

CERN Document Server

American Society for Testing and Materials. Philadelphia

2004-01-01

1.1 This guide provides guidance and recommended practices for establishing a comprehensive quality assurance program for uranium conversion facilities. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. 1.3 The basic elements of a quality assurance program appear in the following order: FUNCTION SECTION Organization 5 Quality Assurance Program 6 Design Control 7 Instructions, Procedures & Drawings 8 Document Control 9 Procurement 10 Identification and Traceability 11 Processes 12 Inspection 13 Control of Measuring and Test Equipment 14 Handling, Storage and Shipping 15 Inspection, Test and Operating Status 16 Control of Nonconforming Items 17 Corrective Actions 18 Quality Assurance Records 19 Audits 20 TABLE 1 NQA-1 Basic Requirements Relat...

Regulatory activities; Actividades regulatorias

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This publication, compiled in 8 chapters, presents the regulatory system developed by the Nuclear Regulatory Authority (NRA) of the Argentine Republic. The following activities and developed topics in this document describe: the evolution of the nuclear regulatory activity in Argentina; the Argentine regulatory system; the nuclear regulatory laws and standards; the inspection and safeguards of nuclear facilities; the emergency systems; the environmental systems; the environmental monitoring; the analysis laboratories on physical and biological dosimetry, prenatal irradiation, internal irradiation, radiation measurements, detection techniques on nuclear testing, medical program on radiation protection; the institutional relations with national and international organization; the training courses and meeting; the technical information.

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-07-08

The regulatory research program is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year.

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

International Nuclear Information System (INIS)

1986-01-01

The regulatory research program is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year

Battelle integrity of nuclear piping program. Summary of results and implications for codes/standards

International Nuclear Information System (INIS)

Miura, Naoki

2005-01-01

The BINP(Battelle Integrity of Nuclear Piping) program was proposed by Battelle to elaborate pipe fracture evaluation methods and to improve LBB and in-service flaw evaluation criteria. The program has been conducted from October 1998 to September 2003. In Japan, CRIEPI participated in the program on behalf of electric utilities and fabricators to catch up the technical backgrounds for possible future revision of LBB and in-service flaw evaluation standards and to investigate the issues needed to be reflected to current domestic standards. A series of the results obtained from the program has been well utilized for the new LBB Regulatory Guide Program by USNRC and for proposal of revised in-service flaw evaluation criteria to the ASME Code Committee. The results were assessed whether they had implications for the existing or future domestic standards. As a result, the impact of many of these issues, which were concerned to be adversely affected to LBB approval or allowable flaw sizes in flaw evaluation criteria, was found to be relatively minor under actual plant conditions. At the same time, some issues that needed to be resolved to address advanced and rational standards in the future were specified. (author)

The waste isolation pilot plant regulatory compliance program

International Nuclear Information System (INIS)

Mewhinney, J.A.; Kehrman, R.F.

1996-01-01

The passage of the WIPP Land Withdrawal Act of 1992 (LWA) marked a turning point for the Waste Isolation Pilot Plant (WIPP) program. It established a Congressional mandate to open the WIPP in as short a time as possible, thereby initiating the process of addressing this nation's transuranic (TRU) waste problem. The DOE responded to the LWA by shifting the priority at the WIPP from scientific investigations to regulatory compliance and the completion of prerequisites for the initiation of operations. Regulatory compliance activities have taken four main focuses: (1) preparing regulatory submittals; (2) aggressive schedules; (3) regulator interface; and (4) public interactions

30 CFR 906.10 - State regulatory program approval.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false State regulatory program approval. 906.10 Section 906.10 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE COLORADO § 906.10 State...

Regulatory requirements of the integrated technology demonstration program, Savannah River Site (U)

International Nuclear Information System (INIS)

Bergren, C.L.

1992-01-01

The integrated demonstration program at the Savannah River Site (SRS) involves demonstration, testing and evaluation of new characterization, monitoring, drilling and remediation technologies for soils and groundwater impacted by organic solvent contamination. The regulatory success of the demonstration program has developed as a result of open communications between the regulators and the technical teams involved. This open dialogue is an attempt to allow timely completion of applied environmental restoration demonstrations while meeting all applicable regulatory requirements. Simultaneous processing of multiple regulatory documents (satisfying RCRA, CERCLA, NEPA and various state regulations) has streamlined the overall permitting process. Public involvement is achieved as various regulatory documents are advertised for public comment consistent with the site's community relations plan. The SRS integrated demonstration has been permitted and endorsed by regulatory agencies, including the Environmental Protection Agency (EPA) and the South Carolina Department of Health and Environmental Control. EPA headquarters and regional offices are involved in DOE's integrated Demonstration Program. This relationship allows for rapid regulatory acceptance while reducing federal funding and time requirements. (author)

77 FR 55430 - Arkansas Regulatory Program and Abandoned Mine Land Reclamation Plan

Science.gov (United States)

2012-09-10

... of its regulatory program and abandoned mine land reclamation plan, make grammatical changes, correct... portions of its regulatory program and abandoned mine land reclamation plan, make grammatical changes... Streams. PART 785--REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING 785.13, 785.14, 785.15...

Safety research programs sponsored by Office of Nuclear Regulatory Research

International Nuclear Information System (INIS)

Weiss, A.J.; Azarm, A.; Baum, J.W.

1989-07-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems Research of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through September 30, 1988

The Atomic Energy Control Board's regulatory research and support program

International Nuclear Information System (INIS)

1988-04-01

The purpose of the Regulatory Research and Support Program is to augment and extend the capability of the Atomic Energy Control Board's (AECB) regulatory program beyond the capability of in-house resources. The overall objective of the program is to produce pertinent and independent scientific and other knowledge and expertise that will assist the AECB in making correct, timely and credible decisions on regulating the development, application and use of atomic energy. The objectives are achieved through contracted research, development, studies, consultant and other kinds of projects administered by the Research and Radiation Protection Branch (RRB) of the AECB

Regulatory research and support program for 1992/93 - project descriptions. Information bulletin

International Nuclear Information System (INIS)

1992-01-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear facilities and materials

Regulatory research and support program for 1992/93 - project descriptions. Information bulletin

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-02

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear facilities and materials.

Dental Assisting Program Standards.

Science.gov (United States)

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the dental assisting program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program…

Regulatory analysis of the Underground Storage Tank-Integrated Demonstration Program

International Nuclear Information System (INIS)

Smith, E.H.

1992-01-01

The Underground Storage Tank-Integrated Demonstration (UST-ID) Program has been developed to identify, demonstrate, test, and evaluate technologies that will provide alternatives to the current underground storage tank remediation program. The UST-ID Program is a national program that consists of five participating US Department of Energy (DOE) sites where technologies can be developed an ultimately demonstrated. Once these technologies are demonstrated, the UST-ID Program will transfer the developed technology system to industry (governmental or industrial) for application or back to Research and Development for further evaluation and modification, as necessary. In order to ensure that the UST-ID Program proceeds without interruption, it will be necessary to identify regulatory requirements along with associated permitting and notification requirements early in the technology development process. This document serves as a baseline for identifying certain federal and state regulatory requirements that may impact the UST-ID Program and the demonstration of any identified technologies

7 CFR 1700.32 - Program Accounting and Regulatory Analysis.

Science.gov (United States)

2010-01-01

... Administrator with respect to management, information systems, budgets, and other such matters. (a) The... 7 Agriculture 11 2010-01-01 2010-01-01 false Program Accounting and Regulatory Analysis. 1700.32... SERVICE, DEPARTMENT OF AGRICULTURE GENERAL INFORMATION Agency Organization and Functions § 1700.32 Program...

Regulatory Monitoring of Fortified Foods: Identifying Barriers and Good Practices

Science.gov (United States)

Rowe, Laura A; Vossenaar, Marieke; Garrett, Greg S

2015-01-01

While fortification of staple foods and condiments has gained enormous global traction, poor performance persists throughout many aspects of implementation, most notably around the critical element of regulatory monitoring, which is essential for ensuring foods meet national fortification standards. Where coverage of fortified foods is high, limited nutritional impact of fortification programs largely exists due to regulatory monitoring that insufficiently identifies and holds producers accountable for underfortified products. Based on quality assurance data from 20 national fortification programs in 12 countries, we estimate that less than half of the samples are adequately fortified against relevant national standards. In this paper, we outline key findings from a literature review, key informant interviews with 11 fortification experts, and semi-quantitative surveys with 39 individuals from regulatory agencies and the food fortification industry in 17 countries on the perceived effectiveness of regulatory monitoring systems and barriers to compliance against national fortification standards. Findings highlight that regulatory agencies and industry disagree on the value that enforcement mechanisms have in ensuring compliance against standards. Perceived political risk of enforcement and poorly resourced inspectorate capacity appear to adversely reinforce each other within an environment of unclear legislation to create a major hurdle for improving overall compliance of fortification programs against national standards. Budget constraints affect the ability of regulatory agencies to create a well-trained inspector cadre and improve the detection and enforcement of non-compliant and underfortified products. Recommendations to improve fortification compliance include improving technical capacity; ensuring sustained leadership, accountability, and funding in both the private and the public sectors; and removing political barriers to ensure consistent detection of

First update to the US Nuclear Regulatory Commission's regulatory strategy for the high-level waste repository program

International Nuclear Information System (INIS)

Johnson, R.L.; Linehan, J.J.

1991-01-01

The US Nuclear Regulatory Commission (NRC) staff has updated its initial regulatory strategy for the High-Level Waste Repository Licensing Program. The update describes changes to the initial strategy and summarizes progress and future activities. This paper summarizes the first update of the regulatory strategy. In general the overall strategy of identifying and reducing uncertainties is unchanged. Identifying regulatory and institutional uncertainties is essentially complete, and therefore, the current and future emphasis is on reducing those regulatory and institutional uncertainties identified to date. The NRC staff has improved the methods of reducing regulatory uncertainties by (1) enhancing the technical basis preparation process for potential rulemakings and guidance and (2) designing a new guidance document, called a staff position, for clarifying regulatory uncertainties. For guiding the US DOE's reduction of technical uncertainties, the NRC staff will give more emphasis to prelicense application reviews and less emphasis on preparing staff technical positions

Standardization of nuclear power plants in the United States: recent regulatory developments

International Nuclear Information System (INIS)

Cowan, B.Z.; Tourtellotte, J.R.

1992-01-01

On April 18, 1989, the United States (U.S.) Nuclear Regulatory Commission (NRC) amended the regulations governing the process for licensing nuclear power plants in the United States to provide for issuance of early site permits, standard design certifications and combined construction permits and operating licenses for nuclear power reactors. The new regulations are designed to achieve early resolution of licensing issues and facilitate standardization of nuclear power plants in the United States. The program for design standardization is central to efforts mounted by the U.S. government and industry to ensure that there will be a next generation of nuclear power facilities in the U.S. The most significant changes are provisions for certification of standard designs and for issuance prior to start of construction of combined licenses which incorporate a construction permit and an operating license with conditions. Such certifications and combined licenses must contain tests, inspections and analyses, and acceptance criteria, which are necessary and sufficient to provide reasonable assurance that the facility has been constructed and will operate in accordance with the combined license. A number of significant implementation issues have arisen. In addition a major court case brought by several anti-nuclear groups is pending, challenging NRC authority to issue combined licenses. It is the goal of the U.S. nuclear industry to have the first of the next generation of standardized nuclear power plants ordered, licensed, constructed and on-line by the year 2000. (author)

Risk Analysis as Regulatory Science: Toward The Establishment of Standards.

Science.gov (United States)

Murakami, Michio

2016-09-01

Understanding how to establish standards is essential for risk communication and also provides perspectives for further study. In this paper, the concept of risk analysis as regulatory science for the establishment of standards is demonstrated through examples of standards for evacuation and provisional regulation values in foods and drinking water. Moreover, academic needs for further studies related to standards are extracted. The concepts of the traditional 'Standard I', which has a paternalistic orientation, and 'Standard II', established through stakeholder consensus, are then systemized by introducing the current status of the new standards-related movement that developed after the Fukushima nuclear power plant accident, and the perspectives of the standards are discussed. Preparation of standards on the basis of stakeholder consensus through intensive risk dialogue before a potential nuclear power plant accident is suggested to be a promising approach to ensure a safe society and enhance subjective well-being. © The Author 2016. Published by Oxford University Press.

Regulatory perspective on NAS recommendations for Yucca Mountain standards

International Nuclear Information System (INIS)

Brocoum, S.J.; Nesbit, S.P.; Duguid, J.A.; Lugo, M.A.; Krishna, P.M.

1996-01-01

This paper provides a regulatory perspective from the viewpoint of the potential licensee, the US Department of Energy (DOE), on the National Academy of Sciences (NAS) report on Yucca Mountain standards published in August 1995. The DOE agrees with some aspects of the NAS report; however, the DOE has serious concerns with the ability to implement some of the recommendations in a reasonable manner

Recommended regulatory program plan for low-level radioactive waste management in Maryland

International Nuclear Information System (INIS)

1986-01-01

The National Program for Low-Level Radioactive Waste Management was instituted by the US Department of Energy to assist the states in carrying out this new federal policy. Based on the premise that the safe disposal of low-level waste is technologically feasible and that states have the necessary degree of authority to set management policy, the National Program is helping them to develop a responsive, comprehensive regulatory program. The State of Maryland is actively engaged with the National Program in its efforts to form a comprehensive management program. The purpose of this plan is to review existing statutory and regulatory program responsibilities and provide a recommended management scheme for low-level radioactive waste

Regulatory Oversight Program, July 1, 1993--March 3, 1997. Volume 2: Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On July, 1993, a Regulatory Oversight (RO) organization was established within the US DOE, Oak Ridge Operations to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the OR program was to ensure continued plant safety, safeguards and security while the plants were transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). Volume 2 contains copies of the documents which established the relationship between NRC, DOE, USEC, and DOL (Dept of Labor) required to facilitate regulatory oversight transition.

Regulatory Oversight Program, July 1, 1993 - March 3, 1997. Volume 2: Appendices

International Nuclear Information System (INIS)

1997-01-01

On July, 1993, a Regulatory Oversight (RO) organization was established within the US DOE, Oak Ridge Operations to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the OR program was to ensure continued plant safety, safeguards and security while the plants were transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). Volume 2 contains copies of the documents which established the relationship between NRC, DOE, USEC, and DOL (Dept of Labor) required to facilitate regulatory oversight transition

Regulatory Endorsement Activities for ASME Nuclear Codes and Standards

International Nuclear Information System (INIS)

West, Raymond A.

2006-01-01

The ASME Board on Nuclear Codes and Standards (BNCS) has formed a Task Group on Regulatory Endorsement (TG-RE) that is currently in discussions with the United States Nuclear Regulatory Commission (NRC) to look at suggestions and recommendations that can be used to help with the endorsement of new and revised ASME Nuclear Codes and Standards (NC and S). With the coming of new reactors in the USA in the very near future we need to look at both the regulations and all the ASME NC and S to determine where we need to make changes to support these new plants. At the same time it is important that we maintain our operating plants while addressing ageing management needs of our existing reactors. This is going to take new thinking, time, resources, and money. For all this to take place the regulations and requirements that we use must be clear concise and necessary for safety and to that end both the NRC and ASME are working together to make this happen. Because of the influence that the USA has in the world in dealing with these issues, this paper is written to inform the international nuclear engineering community about the issues and what actions are being addressed under this effort. (author)

78 FR 58500 - Water Quality Standards Regulatory Clarifications Proposed Rule; Public Meeting and Public Webinars

Science.gov (United States)

2013-09-24

... the proposed rule ``Water Quality Standards Regulatory Clarifications,'' which was published... the federal water quality standards (WQS) regulation at 40 CFR Part 131 which helps implement the..., the proposed rule will lead to improved water quality standard development, implementation and...

30 CFR 906.15 - Approval of Colorado regulatory program amendments.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Approval of Colorado regulatory program amendments. 906.15 Section 906.15 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE COLORADO...

Regulatory issues resolved through design certification on the System 80+trademark standard plant design

International Nuclear Information System (INIS)

Ritterbusch, S.E.; Brinkman, C.B.

1996-01-01

The US Nuclear Regulatory Commission (NRC) has completed its review of the System 80+trademark Standard Plant Design, approving advanced design features and closing severe accident licensing issues. Final Design Approval was granted in July 1994. The NRC review was extensive, requiring written responses to over 4,950 questions and formal printing of over 50,000 Safety Analysis Report pages. New safety issues never before addressed in a regulatory atmosphere had to be resolved with detailed analysis and evaluation of design features. the System 80+ review demonstrated that regulatory issues can be firmly resolved only through presentation of a detailed design and completion of a comprehensive regulatory review

System engineering in the Nuclear Regulatory Commission licensing process: Program architecture process and structure

International Nuclear Information System (INIS)

Romine, D.T.

1989-01-01

In October 1987, the U.S. Nuclear Regulatory Commission (NRC) established the Center for Nuclear Waste Regulatory Analyses at Southwest Research Institute in San Antonio, Texas. The overall mission of the center is to provide a sustained level of high-quality research and technical assistance in support of NRC regulatory responsibilities under the Nuclear Waste Policy Act (NWPA). A key part of that mission is to assist the NRC in the development of the program architecture - the systems approach to regulatory analysis for the NRC high-level waste repository licensing process - and the development and implementation of the computer-based Program Architecture Support System (PASS). This paper describes the concept of program architecture, summarizes the process and basic structure of the PASS relational data base, and describes the applications of the system

Workplace wellness programs: how regulatory flexibility might undermine success.

Science.gov (United States)

Pomeranz, Jennifer L

2014-11-01

The Patient Protection and Affordable Care Act revised the law related to workplace wellness programs, which have become part of the nation's broader health strategy. Health-contingent programs are required to be reasonably designed. However, the regulatory requirements are lax and might undermine program efficacy in terms of both health gains and financial return. I propose a method for the government to support a best-practices approach by considering an accreditation or certification process. Additionally I discuss the need for program evaluation and the potential for employers to be subject to litigation if programs are not carefully implemented.

Regulatory Oversight Program, July 1, 1993--March 3, 1997. Volume 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On July, 1993, a Regulatory Oversight (RO) organization was established within the US DOE, Oak Ridge Operations (ORO) to provide regulatory oversight of the DOE uranium enrichment facilities leased to the United States Enrichment Corporation (USEC). The purpose of the OR program was to ensure continued plant safety, safeguards and security while the plants were transitioned to regulatory oversight by the Nuclear Regulatory Commission (NRC). Volume 3 contains copies of two reports that document the DOE/ORO regulatory oversight inspection and enforcement history for each gaseous diffusion plant site. Each report provides a formal mechanism by which DOE/ORO could communicate the inspection and enforcement history to NRC. The reports encompass the inspection activities that occurred during July 1, 1993 through March 2, 1997.

NRC review of passive reactor design certification testing programs: Overview, progress, and regulatory perspective

Energy Technology Data Exchange (ETDEWEB)

Levin, A.E.

1995-09-01

New reactor designs, employing passive safety systems, are currently under development by reactor vendors for certification under the U.S. Nuclear Regulatory Commission`s (NRC`s) design certification rule. The vendors have established testing programs to support the certification of the passive designs, to meet regulatory requirements for demonstration of passive safety system performance. The NRC has, therefore, developed a process for the review of the vendors` testing programs and for incorporation of the results of those reviews into the safety evaluations for the passive plants. This paper discusses progress in the test program reviews, and also addresses unique regulatory aspects of those reviews.

Overview of the Nuclear Regulatory Commission's safety research program

International Nuclear Information System (INIS)

Beckjord, E.S.

1989-01-01

Accomplishments during 1988 of the Office of Nuclear Regulatory Research and the program of safety research are highlighted, and plans, expections, and needs of the next year and beyond are discussed. Topics discussed include: ECCS Appendix K Revision; pressurized thermal shock; NUREG-1150, or the PRA method performance document; resolution of station blackout; severe accident integration plan; nuclear safety research review committee; and program management

Standards for Adult Education ESL Programs

Science.gov (United States)

TESOL Press, 2013

2013-01-01

What are the components of a quality education ESL program? TESOL's "Standards for Adult Education ESL Programs" answers this question by defining quality components from a national perspective. Using program indicators in eight distinct areas, the standards can be used to review an existing program or as a guide in setting up a new…

Regulatory research and support program for 1988/89 - project descriptions

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-15

Information Bulletin, 1988. Project descriptions for the Regulatory Research and Support Program. This Information Bulletin contains a list of the projects with a brief description of each, and additional supporting information.

Regulatory research and support program for 1988/89 - project descriptions

International Nuclear Information System (INIS)

1988-01-01

Information Bulletin, 1988. Project descriptions for the Regulatory Research and Support Program. This Information Bulletin contains a list of the projects with a brief description of each, and additional supporting information

A model surveillance program based on regulatory experience

International Nuclear Information System (INIS)

Conte, R.J.

1980-01-01

A model surveillance program is presented based on regulatory experience. The program consists of three phases: Program Delineation, Data Acquistion and Data Analysis. Each phase is described in terms of key quality assurance elements and some current philosophies is the United States Licensing Program. Other topics include the application of these ideas to test equipment used in the surveillance progam and audits of the established program. Program Delineation discusses the establishment of administrative controls for organization and the description of responsibilities using the 'Program Coordinator' concept, with assistance from Data Acquisition and Analysis Teams. Ideas regarding frequency of surveillance testing are also presented. The Data Acquisition Phase discusses various methods for acquiring data including operator observations, test procedures, operator logs, and computer output, for trending equipment performance. The Data Analysis Phase discusses the process for drawing conclusions regarding component/equipment service life, proper application, and generic problems through the use of trend analysis and failure rate data. (orig.)

Program plan for future regulatory activity in nuclear-power-plant maintenance

International Nuclear Information System (INIS)

Badalamente, R.V.

1982-10-01

The intent of this paper is to describe the results of a study of nuclear power plant (NPP) maintenance conducted by Battelle's Pacific Northwest Laboratories (PNL) for the Nuclear Regulatory Commission (NRC). The purpose of the study for the NRC was to determine problems affecting human performance in NPP maintenance, pinpoint those which adversely affect public health and safety, review strategies for overcoming the problems, and suggest the direction that regulatory activities should take. Results of the study were presented to the NRC (Division of Human Factors Safety) in the form of a recommended program plan for future regulatory activity in NPP maintenance

Comparative study of Malaysian and Philippine regulatory infrastructures on radiation and nuclear safety with international standards

International Nuclear Information System (INIS)

Cayabo, Lynette B.

2013-06-01

This study presents the results of the critical reviews, analysis, and comparison of the regulatory infrastructures for radiation and nuclear safety of Malaysis and the Philippines usi ng the IAEA safety requirements, GSR Part 1, G overnment, Legal and Regulatory Framework for Safety'' as the main basis and in part, the GSR Part 3, R adiation Protection and Safety of Radiation Sources: International Basic Safety Standards . The scope of the comparison includes the elements of the relevant legislations, the regulatory system and processes including the core functions of the regulatory body (authorization, review and assessment, inspection and enforcement, development of regulations and guides); and the staffing and training of regulatory body. The respective availabe data of the Malaysian and Philippine regulatory infrastructures and current practices were gathered and analyzed. Recommendations to fill the gaps and strengthen the existing regulatory infrastructure of each country was given using as bases relevant IAEA safety guides. Based on the analysis made, the main findings are: the legislations of both countries do not contain al the elements of teh national policy and strategy for safety as well as those of teh framework for safety in GR Part I. Among the provision that need to be included in the legislations are: emergency planning and response; decommissioning of facilities safe management of radioactive wastes and spent fuel; competence for safety; and technical sevices. Provisions on coordination of different authorities with safety responsibilities within the regulatory framework for safety as well as liaison with advisory bodies and support organizations need to be enhanced. The Philippines needs to establish an independent regulatory body, ie. separate from organizations charged with promotion of nuclear technologies and responsible for facilitiesand activities. Graded approach on the system of notification and authorization by registration and

Research program on regulatory safety research

International Nuclear Information System (INIS)

Mailaender, R.

2010-02-01

This paper elaborated for the Swiss Federal Office of Energy (SFOE) presents the synthesis report for 2009 made by the SFOE's program leader on the research program concerning regulatory nuclear safety research, as co-ordinated by the Swiss Nuclear Safety Inspectorate ENSI. Work carried out in various areas is reviewed, including that done on reactor safety, radiation protection and waste disposal as well as human aspects, organisation and safety culture. Work done concerning materials, pressure vessel integrity, transient analysis, the analysis of serious accidents in light-water reactors, fuel and material behaviour, melt cooling and concrete interaction is presented. OECD data bank topics are discussed. Transport and waste disposal research at the Mont Terri rock laboratory is looked at. Requirements placed on the personnel employed in nuclear power stations are examined and national and international co-operation is reviewed

Management plan for the Nuclear Standards Program

International Nuclear Information System (INIS)

1979-11-01

This Management Plan was prepared to describe the manner in which Oak Ridge National Laboratory will provide technical management of the Nuclear Standards Program. The organizational structure that has been established within ORNL for this function is the Nuclear Standards Management Center, which includes the Nuclear Standards Office (NSO) already in existence at ORNL. This plan is intended to support the policies and practices for the development and application of technical standards in ETN projects, programs, and technology developments as set forth in a standards policy memorandum from the DOE Program Director for Nuclear Energy

Gas industry standards board: Legal considerations in the standard setting process

Energy Technology Data Exchange (ETDEWEB)

Mishkin, M.T.; Adelman, D.I.

1994-01-01

On December 23, 1993, the Federal Energy Regulatory Commission (FERC) issued Order 563, a Final Rule adopting the agreements of informal industry-wide working groups to standardize information relating to pipeline capacity release programs mandated under Order 636. Order 563 is noteworthy for its reliance upon the industry to develop consensus standards for Commission adoption. The industry's success in reaching agreements on key communication standards issues spawned recommendations from the working groups to continue the development and maintenance of industry-wide standards through a permanent Gas Industry Standards Board (GISB). This article examines legal issues bearing on GISB's potential role in the regulatory process. Specifically, this article addresses constitutional and statutory considerations relating to the FERC's authority to delegate certain responsibilities to a voluntary, industry sponsored and supported private body such as that taking shape within the gas industry.

The standard for program management

CERN Document Server

2017-01-01

The Standard for Program Management – Fourth Edition differs from prior editions by focusing on the principles of good program management. Program activities have been realigned to program lifecycle phases rather than topics, and the first section was expanded to address the key roles of program manager, program sponsor and program management office. It has also been updated to better align with PMI’s Governance of Portfolios, Programs, and Projects: A Practice Guide.

77 FR 29001 - Medicare and Medicaid Program; Regulatory Provisions to Promote Program Efficiency, Transparency...

Science.gov (United States)

2012-05-16

... Provisions to Promote Program Efficiency, Transparency, and Burden Reduction; Final Rule #0;#0;Federal..., Transparency, and Burden Reduction AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Final... on providers of care. CMS has also identified non-regulatory changes to increase transparency and to...

1994 DOE Technical Standards Program Workshop: Proceedings

International Nuclear Information System (INIS)

Spellman, D.J.

1994-01-01

The DOE Technical Standards Program has been structured to provide guidance and assistance for the development, adoption, and use of voluntary standards within the Department. OMB Circular A-119, ''Federal Participation in the Development and Use of Voluntary Standards'' establishes the policy to be followed in working with voluntary standards bodies, and in adopting and using voluntary standards whenever feasible. The DOE Technical Standards Program is consistent with this policy and is dedicated to the task of promoting its implementation. The theme of this year's workshop is ''Standards Initiatives in Environmental Management fostering the development and use of industry standards for safe, environmentally responsible operations.'' The objective of the workshop is to increase the participant's awareness of the standardization activities taking place nationally and internationally and the impact of these activities on their efforts, and to facilitate the exchange of experiences, processes, and tools for implementing the program. Workshop sessions will include presentations by industry and Government notables in the environment, safety, and health arena with ample opportunity for everyone to ask questions and share experiences. There will be a breakout session which will concentrate on resolution of issues arising from the implementation of the DOE Technical Standards Program and a plenary session to discuss the plans developed by the breakout groups. Many organizations provide services and products which support the development, processing, distribution, and retrieval of standards. Those organizations listed at the end of the agenda will have exhibits available for your perusal throughout the workshop. Last year's workshop was very successful in stimulating an understanding of an interest in the standards program. This year, we hope to build on that success and provide an environment for the synergism of ideas to enhance the program and advance its implementation

Strategies of bringing drug product marketing applications to meet current regulatory standards.

Science.gov (United States)

Wu, Yan; Freed, Anita; Lavrich, David; Raghavachari, Ramesh; Huynh-Ba, Kim; Shah, Ketan; Alasandro, Mark

2015-08-01

In the past decade, many guidance documents have been issued through collaboration of global organizations and regulatory authorities. Most of these are applicable to new products, but there is a risk that currently marketed products will not meet the new compliance standards during audits and inspections while companies continue to make changes through the product life cycle for continuous improvement or market demands. This discussion presents different strategies to bringing drug product marketing applications to meet current and emerging standards. It also discusses stability and method designs to meet process validation and global development efforts.

Participatory workplace wellness programs: reward, penalty, and regulatory conflict.

Science.gov (United States)

Pomeranz, Jennifer L

2015-06-01

POLICY POINTS: Workplace wellness programs that provide incentives for completing a health risk assessment are a form of participatory programs. There are legal and ethical concerns when employers assess penalties for not completing a health risk assessment, raising questions about the voluntariness of such a program. The Departments of Treasury, Labor, and Health and Human Services' 2013 regulations for participatory programs and employers' current practices conflict with the Equal Employment Opportunity Commission's prevailing interpretation of the Americans with Disabilities Act of 1990. In keeping with the Patient Protection and Affordable Care Act, Congress revised the law related to workplace wellness programs. In June 2013, the Departments of Treasury, Labor, and Health and Human Services passed the final regulations, updating their 2006 regulatory framework. Participatory programs that reward the completion of a health risk assessment are now the most common type of wellness program in the United States. However, legal and ethical concerns emerge when employers utilize incentives that raise questions about the voluntariness of such programs. At issue is that under the Americans with Disabilities Act (ADA) of 1990, employers cannot require health-related inquiries and exams. To analyze the current interpretation of the ADA, I conducted research on both LexisNexis and federal agency websites. The resulting article evaluates the differences in the language of Congress's enabling legislation and the federal departments' regulations and how they may conflict with the ADA. It also reviews the federal government's authority to address both the legal conflict and ethical concerns related to nonvoluntary participatory programs. Employers' practices and the federal departments' regulations conflict with the current interpretation of the ADA by permitting employers to penalize employees who do not complete a health risk assessment. The departments' regulations may be

14 CFR 151.99 - Modifications of programming standards.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

Methodology for value/impact assessment of nuclear regulatory research programs

International Nuclear Information System (INIS)

Carlson, D.D.

1978-12-01

A methodology for conducting a value/impact assessment of research programs has been developed to provide the Nuclear Regulatory Commission (NRC) an improved capability for allocating resources for confirmatory research. This report presents a seven-step evaluation process and applies it to selected units of research. The methodology is intended to provide insight into the technical merits of the programs, one dimension of the complex problem of resource allocation for confirmatory research

Standards for maintenance documentation of COSMOS programs

International Nuclear Information System (INIS)

Burstall, R.F.; Rickets, T.M.; Butland, A.T.D.

1982-06-01

The Compatible Open Shop Modular Operating Scheme (COSMOS) is used for fast reactor neutronics and subassembly distortion calculations in the UK. It provides database and databank facilities for this purpose. A large number of applications programs use these facilities. This report sets down the standards agreed for use in the preparation of maintenance documents for these programs. These standards have been developed as the result of experience with earlier more complicated standards. Some of the terminology used in this report is particular to COSMOS, but the general features of the standard may be useful to those responsible for other computer programs. (author)

Overview of NRC's human factors regulatory research program

International Nuclear Information System (INIS)

Coffman, F.D. Jr.

1989-01-01

The human factors research program is divided into distinct and interrelated program activities: (1) Personnel Performance measurement, (2) Personnel Subsystem, (3) Human-System Interface, (4) Organization and Management, and (5) a group of Reliability Assessment activities. The purpose of the Personnel Performance Measurement activity is to improve the Agency's understanding of the factors influencing personnel performance and the effects on the safety of nuclear operations and maintenance by developing improvements to methods for collecting and managing personnel performance data. Personnel Subsystem research will broaden the understanding of such factors as staffing, qualifications, and training that influence human performance in the nuclear system and will develop the technical basis for regulatory guidance to reduce any adverse impact of these influences on nuclear safety. Research in the Human-System Interface activity will provide the technical basis for ensuring that the interface between the system and the human user supports safe operations and maintenance. Organization and Management research will result in the development of tools for evaluating organization and management issues within the nuclear industry. And finally, the Reliability Assessment group of activities includes multidisciplinary research that will integrate human and hardware considerations for evaluating reliability and risk in NRC licensing, inspection, and regulatory decisions

Comparisons of ANSI standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANSI standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

1995-10-01

This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

DOE standard: Radiological control

International Nuclear Information System (INIS)

1999-07-01

The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ''Occupational Radiation Protection''. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835

DOE standard: Radiological control

Energy Technology Data Exchange (ETDEWEB)

1999-07-01

The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

Standards for School Guidance Programs in Maryland.

Science.gov (United States)

Maryland State Dept. of Education, Baltimore. Div. of Compensatory, Urban, and Supplementary Programs.

This brochure is a checklist to rate school compliance with the standards for school guidance programs in Maryland, which were developed by the Maryland State Department of Education. The first set of standards addresses the philosophy and goals of school guidance programs in Maryland and the extent to which program goals and objectives are…

Discussion of Regulatory Guide 7.10, emphasizing the graded approach for establishing QA programs

International Nuclear Information System (INIS)

Gordon, L.; Lake, W.H.

1983-01-01

To assist applicants in establishing an acceptable QA program to meet the programmatic elements of Appendix E to 10 CFR Part 71, Regulatory Guide 7.10 was developed. Regulatory Guide 7.10 is organized in three self-contained ANNEXES. Guidance applicable to designer/fabricators, to users, and users of radiographic devices are in separate annexes. QA programs for packaging to transport radioactive material are similar in regard to the various operations a licensee may be involved in. However, the appropriate QA/QC effort to verify the program elements may vary significantly. This is referred to as the graded approach. Appendix A in the guide addresses the graded approach

Humanitarian Use Device and Humanitarian Device Exemption regulatory programs: pros and cons.

Science.gov (United States)

Bernad, Daniel Maxwell

2009-03-01

The US FDA established the Humanitarian Use Device (HUD) and Humanitarian Device Exemption (HDE) program to encourage medical device firms to address rare diseases. Despite being in existence for over a decade, there has only been one peer-reviewed publication examining this field. The objective of this report is to investigate how the HUD/HDE program differs from the standard regulatory system, discuss its potential advantages and disadvantages, and to speculate which humanitarian devices will be brought to market within the next 5 years. A total of 40 semistructured interviews with stakeholders, representing approximately half (n = 20, 49%) of the firms that have successfully obtained HDE-approved products, were performed in order to acquire the primary data for this paper. There appear to be short-term gains and long-term drains associated with launching humanitarian devices to market. This report aims to provide sponsors with information that may allow them to make better decisions during their product development of humanitarian devices and may, hopefully, also play a role in encouraging other sponsors to take the necessary steps forward in helping to find treatments for patients with rare diseases.

The current state of inservice testing programs at U.S. Nuclear Power Plants - a regulatory overview

International Nuclear Information System (INIS)

Campbell, P.; Colaccino, J.

1994-01-01

Information is provided on inservice testing (IST) of pumps and valves at U.S. nuclear power plants to provide consistency in the implementation of regulatory requirements and to enhance communications among utility licensees who may have, like NSSS vendors, similar kinds and numbers of components or comparable IST programs. Documents discussed include the ASME Operation and Maintenance Standards Parts 6 and 10 (covering inservice testing of pumps and valves in light water reactor power plants), the draft NUREG-1482, Guidelines for Inservice Testing at Nuclear Power Plants (including review comments by Nuclear Management and Resource Council), and applicable Licensee Event Reports including summaries of several reports relating to IST

Regulatory challenges for independent organization and licensing procedures for Egypt first nuclear power program

International Nuclear Information System (INIS)

Elsheikh, B.M.

2012-01-01

In March 2010 the Government of Egypt issued an Ordinance creating an independent regulatory body the Egypt Nuclear and Radiological Regulatory Authority (NRRA) reporting directly to the Prime Minister and responsible for matters dealing with protection of the radiation worker, public and environment from the harmful effects of ionizing radiation. A little more than 2 years have elapsed since this date. Some of the challenges faced by NRRA to its regulatory independence are given below. This paper will discuss the major challenges relating to Egyptian nuclear power program and specially the regulatory effectiveness and licensing procedures compared to international comparison.

Regulatory approach of the monitoring the effectiveness of maintenance at nuclear power plants program

International Nuclear Information System (INIS)

Vajgel, Stefan

2009-03-01

The electrical power generation using nuclear power plants requires this installation being safety, reliable and available for the working periods. For this purpose, an adequate, effective and well conducted maintenance program makes an essential and useful tool to the owner of the plant. However, it is necessary to follow the regulatory requirements for this program implementation which monitories this maintenance effectiveness. There are Brazilian norms requirements which must be followed. The international regulatory guides establish these requirements in good details but it is necessary to verify if this methodology for implementing can be totally applied here in Brazil. Then, the american guide NUMARC 93-01 which details how can be implemented a program for this monitoring, shows some methods for using. In this thesis, the Delphi and Probabilistic Safety Analysis were briefly included because they were preferred for implementing this monitoring.in a Brazilian plant. The results which are being obtained show that, looking the regulatory aspects, the NUMARC 93-01 follows our regulations and gives good results for the plant management. (author)

1996 DOE technical standards program workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

Regulatory strategy and status for the Y2K readiness program of the nuclear power plants

International Nuclear Information System (INIS)

Jeong, Choong Heui; Ji, Seong Hyon; Oh, Soung Hun; Shin, Won Ki

1999-01-01

KINS established a Regulatory Strategy for Y2K Readiness Program of the Nuclear Power Plants in May 1998. On July 29, 1998, the Regulatory Action was enforced on licensees to setup the Y2K Readiness Program and report the stepwise Implementation Results of the Program. KEPCO established the Y2K Readiness Program and finished the Detailed Assessment following the Program. The Assessment showed that 108 out of 726 assets are Non-Compliant. KINS has performed the evaluation for Initial and Detailed Assessment Reports and the site audit for the Wolsong Site Division. Through those regulatory activities, we have gotten much assurance that no Y2K problem will impact on safety-related systems. And considering the progress forwarded by the licensee, we expect that all Y2K issues can be resolved before July 1999. However, to obtain the perfect assurance of the safety against the challenge of Year 2000, we will perform a thorough Audit for Validation Tests at Sites, perform a proper review for the major issues, and complete an in-depth evaluation of Submittals including Contingency Plan

Environmental radioactive intercomparison program and radioactive standards program

Energy Technology Data Exchange (ETDEWEB)

Dilbeck, G. [Environmental Monitoring Systems Laboratory, Las Vegas, NV (United States)

1993-12-31

The Environmental Radioactivity Intercomparison Program described herein provides quality assurance support for laboratories involved in analyzing public drinking water under the Safe Drinking Water Act (SDWA) Regulations, and to the environmental radiation monitoring activities of various agencies. More than 300 federal and state nuclear facilities and private laboratories participate in some phase of the program. This presentation describes the Intercomparison Program studies and matrices involved, summarizes the precision and accuracy requirements of various radioactive analytes, and describes the traceability determinations involved with radioactive calibration standards distributed to the participants. A summary of program participants, sample and report distributions, and additional responsibilities of this program are discussed.

Study of federal microwave standards

Energy Technology Data Exchange (ETDEWEB)

David, L.

1980-08-01

Present and future federal regulatory processes which may impact the permissible levels of microwave radiation emitted by the SPS Microwave Power Transmission (MPTS) were studied. An historical development of US occupational and public microwave standards includes an overview of Western and East European philosophies of environmental protection and neurophysiology which have led to the current widely differing maximum permissible exposure limits to microwaves. The possible convergence of microwave standards is characterized by a lowering of Western exposure levels while Eastern countries consider standard relaxation. A trend toward stricter controls on activities perceived as harmful to public health is under way as is interest in improving the federal regulatory process. Particularly relevant to SPS is the initiation of long-term, low-level microwave exposure programs. Coupled with new developments in instrumentation and dosimetry, the results from chronic exposure program and population exposure studies could be expected within the next five to ten years. Also discussed is the increasing public concern that rf energy is yet another hazardous environmental agent.

KWOC [Key-Word-Out-of-Context] Index of US Nuclear Regulatory Commission Regulatory Guide Series

International Nuclear Information System (INIS)

Jennings, S.D.

1990-04-01

To meet the objectives of the program funded by the Department of Energy (DOE)-Nuclear Energy (NE) Technology Support Programs, the Performance Assurance Project Office (PAPO) administers a Performance Assurance Information Program that collects, compiles, and distributes program-related information, reports, and publications for the benefit of the DOE-NE program participants. THE ''KWOC Index of US Nuclear Regulatory Commission Regulatory Guide Series'' is prepared as an aid in searching for specific topics in the US Nuclear Regulatory Commission, Regulatory Guide Series

Reactive Programming in Standard ML

OpenAIRE

Pucella, Riccardo

2004-01-01

Reactive systems are systems that maintain an ongoing interaction with their environment, activated by receiving input events from the environment and producing output events in response. Modern programming languages designed to program such systems use a paradigm based on the notions of instants and activations. We describe a library for Standard ML that provides basic primitives for programming reactive systems. The library is a low-level system upon which more sophisticated reactive behavi...

77 FR 71445 - Regulatory and Administrative Waivers Granted for Multifamily Housing Programs To Assist With...

Science.gov (United States)

2012-11-30

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. 5677-N-01] Regulatory and Administrative Waivers Granted for Multifamily Housing Programs To Assist With Recovery and Relief in Sandy Disaster... in the disaster areas is widespread, and the need for regulatory relief in many areas pertaining to...

Relationship between internal medicine program board examination pass rates, accreditation standards, and program size.

Science.gov (United States)

Falcone, John L; Gonzalo, Jed D

2014-01-19

To determine Internal Medicine residency program compliance with the Accreditation Council for Graduate Medical Education 80% pass-rate standard and the correlation between residency program size and performance on the American Board of Internal Medicine Certifying Examination. Using a cross-sectional study design from 2010-2012 American Board of Internal Medicine Certifying Examination data of all Internal Medicine residency pro-grams, comparisons were made between program pass rates to the Accreditation Council for Graduate Medical Education pass-rate standard. To assess the correlation between program size and performance, a Spearman's rho was calculated. To evaluate program size and its relationship to the pass-rate standard, receiver operative characteristic curves were calculated. Of 372 Internal Medicine residency programs, 276 programs (74%) achieved a pass rate of =80%, surpassing the Accreditation Council for Graduate Medical Education minimum standard. A weak correlation was found between residency program size and pass rate for the three-year period (p=0.19, pInternal Medicine residency programs complied with Accreditation Council for Graduate Medical Education pass-rate standards, a quarter of the programs failed to meet this requirement. Program size is positively but weakly associated with American Board of Internal Medicine Certifying Examination performance, suggesting other unidentified variables significantly contribute to program performance.

The U.S. Nuclear Regulatory Commission seismic safety research program

International Nuclear Information System (INIS)

Kenneally, R.M.; Guzy, D.J.; Murphy, A.J.

1988-01-01

The seismic safety research program sponsored by the U.S. Nuclear Regulatory Commission is directed toward improving the evaluation of potential earthquake effects on nuclear power plant operations. The research has been divided into three major program areas: earth sciences, seismic design margins, and fragilities and response. A major thrust of this research is to assess plant behavior for seismic events more severe and less probable than those considered in design. However, there is also research aimed at improving the evaluation of earthquake input and plant response at plant design levels

The regulatory control of radioactive sources in Argentina

International Nuclear Information System (INIS)

Rojkind, Roberto Hector

1997-01-01

Argentina has been conducting nuclear activities for more than forty years, and as early as in 1956 established a Regulatory Authority. Procedures for compliance monitoring and enforcement have been in use in the regulatory control of radioactive sources, and regulatory standards and regulations had been set in Argentina, before the accident in Goiania. The conclusions drawn from that accident encouraged in Argentina the improvement of some regulatory procedures and helped to enhance the quality of the regulatory process. Therefore, the effectiveness of the control of spent radioactive sources has gradually increased, and enforcement actions to prevent radioactive sources ending up in the public domain improved. Some lessons learned in Argentina from the accident in Goiania and the main characteristics of an effective enforcement program helpful to prevent radiological accidents in industrial, medical, research and teaching uses of radioactive sources are presented. (author)

Overview of the Nuclear Regulatory Commission Low-Level Waste Management Program

International Nuclear Information System (INIS)

Bishop, W.P.; Bell, M.J.; Dragonette, K.S.; Adam, J.

1979-01-01

Environmental impacts from Table S-3 of 10 CFR Part 51 are included in individual environmental impact statements for LWR's. In response to a U.S. Court of Appeals finding of inadequate documentation to support Table S-3, ''Environmental Survey of Reprocessing and Waste Management Portions of the LWR Fuel Cycle'' (NUREG-0116) and ''Public Comments and Task Force Responses Regarding Environmental Survey of the Reprocessing and Waste Portions of the LWR Fuel Cycle'' (NUREG-0216) were published. As a result of these in-house studies, an interim rule revising Table S-3 has been published. These documents include discussions of shallow land burial of low-level waste, past experiences and sensitivity calculations estimating potential dose commitments from the groundwater migration of the wastes. An NRC task force report (NUREG-0217) examining the Federal and Agreement State programs for regulating commercial low-level waste disposal recommends increasing the federal role in low-level waste disposal. The need to investigate alternatives to shallow land burial is identified. The NRC is developing a radioactive waste management program which includes a plan for the implementation of the task force recommendations, the development of environmental impacts for low-level waste disposal, development of standards and criteria, and the establishment of a regulatory framework and licensing procedures for the disposal of low-level radioactive waste

77 FR 39385 - Receipts-Based, Small Business Size Standard

Science.gov (United States)

2012-07-03

.... The NRC is increasing its receipts-based, small business size standard from $6.5 million to $7 million...-based, small business size standard increasing from $6.5 million to $7.0 million. This adjustment is to... regulatory programs. The NRC is increasing its receipts-based, small business size standard from $6.5 million...

Manufacturing of biodrugs: need for harmonization in regulatory standards.

Science.gov (United States)

Sahoo, Niharika; Choudhury, Koel; Manchikanti, Padmavati

2009-01-01

Biodrugs (biologics) are much more complex than chemically synthesized drugs because of their structural heterogeneity and interactions within a given biologic system. The manufacturing process in the biodrug industry varies with each type of molecule and is far more elaborate and stringent due to the use of living organisms and complex substrates. Product purity and altered structural characteristics leading to potential immunogenicity have often been of concern when establishing quality and safety in the use of biodrugs. Regulatory compliance in manufacturing and commercialization of biodrugs involves quality control, quality assurance, and batch documentation. Many factors such as host cell development, cell bank establishment, cell culture, protein production, purification, analysis, formulation, storage, and handling are critical for ensuring the purity, activity, and safety of the finished product. Good Manufacturing Practice (GMP) for biodrugs has been developed in certain regions such as the EU, US, and Japan. Due to differences in manufacturing methods and systems, product-specific GMP guidelines are evolving. In general, there are variations in GMP guidelines between countries, which lead to difficulty for the manufacturers in conforming to different standards, thus entailing delays in the commercialization of biodrugs. There is a need to develop a unified regulatory guideline for biodrug manufacturing across various countries, which would be helpful in the marketing of products and trade. This review deals with the comparative framework and analysis of GMP regulation of biodrugs.

Comparisons of ANS, ASME, AWS, and NFPA standards cited in the NRC standard review plan, NUREG-0800, and related documents

International Nuclear Information System (INIS)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Spiesman, J.B.

1995-11-01

This report provides the results of comparisons of the cited and latest versions of ANS, ASME, AWS and NFPA standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC's Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review

Conserved Transcriptional Regulatory Programs Underlying Rice and Barley Germination

Science.gov (United States)

Lin, Li; Tian, Shulan; Kaeppler, Shawn; Liu, Zongrang; An, Yong-Qiang (Charles)

2014-01-01

Germination is a biological process important to plant development and agricultural production. Barley and rice diverged 50 million years ago, but share a similar germination process. To gain insight into the conservation of their underlying gene regulatory programs, we compared transcriptomes of barley and rice at start, middle and end points of germination, and revealed that germination regulated barley and rice genes (BRs) diverged significantly in expression patterns and/or protein sequences. However, BRs with higher protein sequence similarity tended to have more conserved expression patterns. We identified and characterized 316 sets of conserved barley and rice genes (cBRs) with high similarity in both protein sequences and expression patterns, and provided a comprehensive depiction of the transcriptional regulatory program conserved in barley and rice germination at gene, pathway and systems levels. The cBRs encoded proteins involved in a variety of biological pathways and had a wide range of expression patterns. The cBRs encoding key regulatory components in signaling pathways often had diverse expression patterns. Early germination up-regulation of cell wall metabolic pathway and peroxidases, and late germination up-regulation of chromatin structure and remodeling pathways were conserved in both barley and rice. Protein sequence and expression pattern of a gene change quickly if it is not subjected to a functional constraint. Preserving germination-regulated expression patterns and protein sequences of those cBRs for 50 million years strongly suggests that the cBRs are functionally significant and equivalent in germination, and contribute to the ancient characteristics of germination preserved in barley and rice. The functional significance and equivalence of the cBR genes predicted here can serve as a foundation to further characterize their biological functions and facilitate bridging rice and barley germination research with greater confidence. PMID

A study of science leadership and science standards in exemplary standards-based science programs

Science.gov (United States)

Carpenter, Wendy Renae

The purpose for conducting this qualitative study was to explore best practices of exemplary standards-based science programs and instructional leadership practices in a charter high school and in a traditional high school. The focus of this study included how twelve participants aligned practices to National Science Education Standards to describe their science programs and science instructional practices. This study used a multi-site case study qualitative design. Data were obtained through a review of literature, interviews, observations, review of educational documents, and researcher's notes collected in a field log. The methodology used was a multi-site case study because of the potential, through cross analysis, for providing greater explanation of the findings in the study (Merriam, 1988). This study discovered six characteristics about the two high school's science programs that enhance the literature found in the National Science Education Standards; (a) Culture of expectations for learning-In exemplary science programs teachers are familiar with a wide range of curricula. They have the ability to examine critically and select activities to use with their students to promote the understanding of science; (b) Culture of varied experiences-In exemplary science programs students are provided different paths to learning, which help students, take in information and make sense of concepts and skills that are set forth by the standards; (c) Culture of continuous feedback-In exemplary science programs teachers and students work together to engage students in ongoing assessments of their work and that of others as prescribed in the standards; (d) Culture of Observations-In exemplary science programs students, teachers, and principals reflect on classroom instructional practices; teachers receive ongoing evaluations about their teaching and apply feedback towards improving practices as outlined in the standards; (e) Culture of continuous learning-In exemplary

Operating the Advanced Test Reactor in today's economic and regulatory environment

International Nuclear Information System (INIS)

Furstenau, R.V.; Patrick, M.E.; Mecham, D.C.

1999-01-01

The Advanced Test Reactor (ATR), located at the Idaho National Engineering and Environmental Laboratory, is the US Department of Energy's largest and most versatile test reactor. Base programs at ATR are planned well into the 21st century. The ATR and support facilities along with an overview of current programs will be reviewed, but the main focus of the presentation will be on the impact that today's economic and regulatory concerns have had on the operation of this test reactor. Today's economic and regulatory concerns have demanded more work be completed at lower cost while increasing the margin of safety. By the beginning of the 1990 s, federal budgets for research generally and particularly for nuclear research had decreased dramatically. Many national needs continued to require testing in the ATR; but demanded lower cost, increased efficiency, improved performance, and an increased margin of safety. At the same time budgets were decreasing, there was an increase in regulatory compliance activity. The new standards imposed higher margins of safety. The new era of greater openness and higher safety standards complemented research demands to work safer, smarter and more efficiently. Several changes were made at the ATR to meet the demands of the sponsors and public. Such changes included some workforce reductions, securing additional program sponsors, upgrading some facilities, dismantling other facilities, and implementing new safety programs. (author)

Inspection of radiation sources and regulatory enforcement (supplement to IAEA Safety Standards Series No. GS-G-1.5)

International Nuclear Information System (INIS)

2010-08-01

The achievement and maintenance of a high level of safety in the use of radiation sources depends on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for carrying out regulatory inspections, and taking necessary enforcement actions. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the processes for carrying out regulatory inspections and taking enforcement actions. It includes information on the development and use of procedures and standard review plans (i.e. checklists) for inspection. Specific procedures for inspection of radiation practices and sources are provided in the Appendices

Inspection of radiation sources and regulatory enforcement (supplement to IAEA Safety Standards Series No. GS-G-1.5)

International Nuclear Information System (INIS)

2007-04-01

The achievement and maintenance of a high level of safety in the use of radiation sources depends on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for carrying out regulatory inspections, and taking necessary enforcement actions. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the processes for carrying out regulatory inspections and taking enforcement actions. It includes information on the development and use of procedures and standard review plans (i.e. checklists) for inspection. Specific procedures for inspection of radiation practices and sources are provided in the Appendices

Standardization of SOPs to Evaluations: Impacts on Regulatory Decisions using Learning and Memory as Case Studies

Science.gov (United States)

In an era of global trade and regulatory cooperation, consistent and scientifically based interpretation of developmental neurotoxicity (DNT) studies is essential, particularly for non­ standard assays and variable endpoints. Because there is flexibility in the selection of ...

Arrangement between the US Nuclear Regulatory Commission (USNRC) and the Belgian Government for Exchange of Technical Information in Regulatory Matters and in Cooperation in Safety Research and in Standards Development

International Nuclear Information System (INIS)

1978-01-01

This Arrangement was concluded on 6 June 1978 between the United States Nuclear Regulatory Commission and the Belgian Government for exchange of technical information in regulatory matters and in co-operation in safety research and in standards development. Both Parties agree to exchange, as available, technical information related to the regulation of safety and the environmental impact of designated nuclear energy facilities and to safety research of designated types of nuclear facilities. As regards co-operation in safety research, the execution of joint programmes and projects under which activities are divided between the two Parties will be agreed on a case by case basis. The Parties further agree to co-operate in the development of regulatory standards applicable to the designated nuclear facilities. The Arrangement is valid for 5 years and may be extended. (NEA) [fr

76 FR 76104 - Arkansas Regulatory Program and Abandoned Mine Land Reclamation Plan

Science.gov (United States)

2011-12-06

... of their regulatory program and abandoned mine land plan, make grammatical changes, correct..., make grammatical changes, correct punctuation, revise dates, and add citations. The Arkansas... SPECIAL CATEGORIES OF MINING 785.14, 785.16, 785.18, and 785.25 Mountaintop Removal Mining; Permits...

Environmental challenges and opportunities of the evolving North American electricity market : European electricity generating facilities: an overview of European regulatory requirements and standardization efforts

International Nuclear Information System (INIS)

Nichols, L.

2002-06-01

Several factors are affecting power generating facilities, such as the opening of both electricity and gas markets, and the pressure applied on generators and governments to ensure a steady energy supply for consumers. An additional factor is the pressure for the closing of nuclear power facilities. European siting and emissions requirements for coal-fired and natural gas generating facilities were presented in this background paper. In addition, the author provided an overview of the standardization process in place in Europe. The European Union and its functioning were briefly described, as well as a listing of relevant organizations. The current trends were examined. The document first introduced the European Union, and the next section dealt with Regulatory regime: the internal energy market. The third section examined the issue of Regulatory regime: generation and environmental regulations. Section four presented environmental management systems, followed by a section on standardization. Section six discussed European organizations involved in electricity issues, while the following section dealt with European commission programs. The last section briefly looked at the trends in the electricity sector, broaching topics such as compliance, electricity generation, and emissions trading. 52 refs., 2 tabs

The enforcement program of the nuclear regulatory commission in the United States

International Nuclear Information System (INIS)

Thornburg, H.D.

1977-01-01

The enforcement program of the United States Nuclear Regulatory Commission consists of a clearly spelled out, evenly applied program of deterrents which escalate according to the nature of the offense and the past history of the licensee's noncompliances. Ninety-eight percent of all enforcement actions are normally handled by the five Regional offices. Only one percent of noncompliances have been classed as violations where significant safety consequences occurred. A strong and timely enforcement program is essential to insure that licensees fulfill their obligations to protect the public and the environment. (Auth.) [fr

[Regulatory science: modern trends in science and education for pharmaceutical products].

Science.gov (United States)

Beregovykh, V V; Piatigorskaia, N V; Aladysheva, Zh I

2012-01-01

This article reviews modern trends in development of new instruments, standards and approaches to drugs safety, efficacy and quality assessment in USA and EU that can be called by unique term--"regulatory science" which is a new concept for Russian Federation. New education programs (curricula) developed by USA and EU universities within last 3 years are reviewed. These programs were designed in order to build workforce capable to utilize science approach for drug regulation. The principal mechanisms for financing research in regulatory science used by Food and Drug Administration are analyzed. There are no such science and relevant researches in Russian Federation despite the high demand as well as needs for the system for higher education and life-long learning education of specialists for regulatory affairs (or compliance).

The core to regulatory reform

International Nuclear Information System (INIS)

Partridge, J.W. Jr.

1993-01-01

Federal Energy Regulatory Commission (FERC) Orders 436, 500, and 636, the Clean Air Act Amendments of 1990, Public Utility Holding Company Act reform, and the 1992 Energy Policy Act all can have significant effects on an LDC's operations. Such changes in an LDC's environments must be balanced by changes within the utility, its marketplace, and its state regulatory environment. The question is where to start. For Columbia Gas Distribution Cos., based in Columbus, OH, the new operating foundation begins with each employee. Internal strength is critical in designing initiatives that meet the needs of the marketplace and are well-received by regulators. Employees must understand not only the regulatory environment in which the LDC operates, but also how their work contributes to a positive regulatory relationship. To achieve this, Columbia initiated the COntinuing Regulatory Education program, or CORE, in 1991. CORE is a regulatory-focused, information-initiative program coordinated by Columbia's Regulatory Policy, Planning, and Government Affairs Department. The CORE programs can take many forms, such as emerging issue discussions, dialogues with regulators and key parties, updates on regulatory fillings, regulatory policy meetings, and formal training classes. The speakers and discussion facilitators can range from human resource department trainers to senior officers, from regulatory department staff members to external experts, or from state commissioners to executives from other LDCs. The goals of CORE initiatives are to: Support a professional level of regulatory expertise through employee participation in well-developed regulatory programs presented by credible experts. Encourage a constructive state regulatory environment founded on communication and cooperation. CORE achieves these goals via five program levels: introductory basics, advanced learning, professional expertise, crossfunctional dialogues, and external idea exchanges

Special Education Compliance: Program Review Standards and Indicators.

Science.gov (United States)

Missouri State Dept. of Elementary and Secondary Education, Jefferson City. Div. of Special Education.

This manual contains special education standards and indicators for educating children with disabilities in Missouri. It is divided into four main sections. Section 1 contains special education compliance standards based upon the federal Office of Special Education Programs Continuous Improvement Monitoring Program clusters and indicators. The…

January 1978 monthly highlights for Office of Nuclear Regulatory Research Programs at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Mynatt, F.R.

1978-01-01

Highlights of technical progress during January 1978 are presented for sixteen separate program activities which comprise the ORNL research program for the Office of Nuclear Regulatory Research's Division of Reactor Safety Research

Monthly highlights for Office of Nuclear Regulatory Research Programs at Oak Ridge National Laboratory, March 1977

International Nuclear Information System (INIS)

Fee, G.G.

1977-01-01

Highlights of technical progress during March 1977 are presented for thirteen separate program activities which comprise the ORNL research program for the Office of Nuclear Regulatory Research's Division of Reactor Safety Research

Conservation Law Enforcement Program Standardization

National Research Council Canada - National Science Library

Rogers, Stan

2004-01-01

The ultimate goal of standardization is to develop a safe and effective program that is recognized within the USAF, DoD, and by other Federal and state law enforcement agencies, and the general public...

The regulatory control of radioactive sources in Argentina

Energy Technology Data Exchange (ETDEWEB)

Rojkind, Roberto Hector [Autoridade Regulatoria Nuclear, Buenos Aires (Argentina)

1997-12-31

Argentina has been conducting nuclear activities for more than forty years, and as early as in 1956 established a Regulatory Authority. Procedures for compliance monitoring and enforcement have been in use in the regulatory control of radioactive sources, and regulatory standards and regulations had been set in Argentina, before the accident in Goiania. The conclusions drawn from that accident encouraged in Argentina the improvement of some regulatory procedures and helped to enhance the quality of the regulatory process. Therefore, the effectiveness of the control of spent radioactive sources has gradually increased, and enforcement actions to prevent radioactive sources ending up in the public domain improved. Some lessons learned in Argentina from the accident in Goiania and the main characteristics of an effective enforcement program helpful to prevent radiological accidents in industrial, medical, research and teaching uses of radioactive sources are presented. (author) 9 refs; e-mail: rrojkind at sede.arn.gov.br

Preparation of safety regulatory requirements for new technology like digital system

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following four general common positions have been discussed in this fiscal year. The Treatment of Common Cause Failure Resulting from Software within Digital Safety Systems, The Treatment of Hardware Description Language(HDL) Programmed Devices for Use in Nuclear Safety System, Factory Acceptance Test and Site Acceptance Test, The Use of Automatic Tests to Perform Surveilance for Digital Systems. (author)

Safety research programs sponsored by Office of Nuclear Regulatory Research: Progress report, January 1--June 30, 1988

Energy Technology Data Exchange (ETDEWEB)

Baum, J W; Boccio, J L; Diamond, D; Fitzpatrick, R; Ginsberg, T; Greene, G A; Guppy, J G; Hall, R E; Higgins, J C; Weiss, A J [comp.

1988-12-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems Research of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through December 31, 1987.

Safety research programs sponsored by Office of Nuclear Regulatory Research: Progress report, October 1--December 31, 1988

Energy Technology Data Exchange (ETDEWEB)

Weiss, A J; Azarm, A; Baum, J W; Boccio, J L; Carew, J; Diamond, D J; Fitzpatrick, R; Ginsberg, T; Greene, G A; Guppy, J G; Haber, S B

1989-07-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems Research of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through September 30, 1988.

Safety research programs sponsored by Office of Nuclear Regulatory Research: Progress report, January 1--June 30, 1988

International Nuclear Information System (INIS)

Baum, J.W.; Boccio, J.L.; Diamond, D.

1988-12-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems Research of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through December 31, 1987

U.S. Nuclear Regulatory Commission, annual report, 1978

International Nuclear Information System (INIS)

1978-01-01

The report contains the following chapters: (1) overview and summary, (2) reactor regulation, (3) materials regulation, (4) domestic safeguards, (5) waste management, (6) injection and enforcement, (7) operating experience, (8) state programs, (9) international activities, (10) standards development, (11) regulatory research, (12) informing and involving the public, (13) proceedings and litigation, and (14) administration and mangement

Evaluation of regulatory processes affecting nuclear power plant early site approval and standardization

International Nuclear Information System (INIS)

1983-12-01

This report presents the results of a survey and evaluation of existing federal, state and local regulatory considerations affecting siting approval of power plants in the United States. Those factors that may impede early site approval of nuclear power plants are identified, and findings related to the removal of these impediments and the general improvement of the approval process are presented. A brief evaluation of standardization of nuclear plant design is also presented

DOE [Department of Energy]-Nuclear Energy Standards Program annual assessment, FY 1990

International Nuclear Information System (INIS)

Williams, D.L. Jr.

1990-11-01

To meet the objectives of the programs funded by the Department of Energy (DOE)-Nuclear Energy (NE) Technology Support Programs, the Performance Assurance Project Office (PAPO) administers a nuclear standards program and related activities and fosters the development and application of standards. This standards program is carried out in accordance with the principles in DOE Order 1300.2, Department of Energy Standards Program, December 18, 1980. The purposes of this effort, as set forth in three subtasks, are to (1) manage the NE Standards Program, (2) manage the development and maintenance of NE standards, and (3) operate an NE Standards Information Program. This report assesses the Performance Assurance Project Office (PAPO) activities in terms of the objectives of the Department of Energy-Nuclear Energy (DOE-NE) funded programs. To meet these objectives, PAPO administers a nuclear standards program and related activities and fosters the development and application of standards. This task is carried out in accordance with the principles set forth in DOE Order 1300.2, Department of Energy Standards Program, December 18, 1980, and DOE memorandum, Implementation of DOE Orders on Quality Assurance, Standards, and Unusual Occurrence Reporting for Nuclear Energy Programs, March 3, 1982, and with guidance from the DOE-NE Technology Support Programs. 1 tab. (JF)

A Review on the Regulatory Strategy of Human Factors Engineering Consideration in Pakistan Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Sohail, Sabir [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Choi, Seong Nam [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-10-15

In this paper, the legal and regulatory infrastructure available in Pakistan for HFE requirements is assessed, and the methodology for strengthening of legal infrastructure is presented. The regulatory strategy on evaluation of HFE consideration should provide reviewers with guidance on review process. Therefore, the suggested methodology is based on preparation of guidance documents such as checklist, working procedures, S and Gs etc.; incorporation of PRM elements in regulatory system; and finally the development of PRM implementation criteria. Altogether, the scheme provide the enhancement in regulatory infrastructure and also the effective and efficient review process. The Three Mile Island (TMI) accident brought the general consensus among the nuclear community on the integration of human factors engineering (HFE) principles in all phases of nuclear power. This notion has further strengthened after the recent Fukushima nuclear accident. Much effort has been put over to incorporate the lesson learned and continuous technical evolution on HFE to device different standards. The total of 174 ergonomics standards are alone identified by Dul et al. (2004) published by International Organization for Standardization (ISO) and the European Committee for Standardization (CEN) and number of standards and HFE guidelines (S and Gs) are also published by organizations like Institute for Electrical and Electronics Engineering (IEEE), International Electrotechnical Commission (IEC), International Atomic Energy Agency (IAEA), United States Nuclear Regulatory Commission (USNRC), etc. The ambition of effective review on HFE integration in nuclear facility might be accomplished through the development of methodology for systematic implementation of S and Gs. Such kind of methodology would also be beneficial for strengthening the regulatory framework and practices for countries new in the nuclear arena and with small scale nuclear program. The objective of paper is to review the

Overcoming regulatory barriers: DOE environmental technology development program

International Nuclear Information System (INIS)

Kurtyka, B.M.; Clodfelter-Schumack, K.; Evans, T.T.

1995-01-01

The potential to improve environmental conditions via compliance or restoration is directly related to the ability to produce and apply innovative technological solutions. However, numerous organizations, including the US General Accounting Office (GAO), the EPA National Advisory Council for Environmental Policy and Technology (NACEPT), the DOE Environmental Management Advisory Board (EMAB), and the National Science and Technology Council (NSTC) have determined that significant regulatory barriers exist that inhibit the development and application of these technologies. They have noted the need for improved efforts in identifying and rectifying these barriers for the purpose of improving the technology development process, providing innovative alternatives, and enhancing the likelihood of technology acceptance by all. These barriers include, among others, regulator and user bias against ''unknown/unproven'' technologies; multi-level/multi-media permit disincentives; potential liability of developers and users for failed implementation; wrongly defined or inadequate data quality objectives: and lack of customer understanding and input. The ultimate goal of technology development is the utilization of technologies. This paper will present information on a number of regulatory barriers hindering DOE's environmental technology development program and describe DOE efforts to address these barriers

Interprovincial regulatory barriers to procurement in western Canada's oil and gas sector : potential standardization-based solutions : final report

International Nuclear Information System (INIS)

Hawkins, R.; Godin, M.; Josty, P.

2008-01-01

This study reviewed the regulatory environment related to the oil and gas industry in western Canada in order to identify factors limiting the procurement of goods and services required by the industry. The aim of the study was to identify solutions based on the development of voluntary industry standards. Literature and reports related to interprovincial trade and standards were reviewed. The procurement divisions of oil and gas companies and suppliers to the oil and gas industry were consulted in addition to government official and industry experts. A review of provincial technical regulations was completed. The study identified 3 candidates for specific action within the standards system: (1) modular transport platforms; (2) regulatory conformance procedures; and (3) the mobility of skilled workers. Results of the study indicated that the development of service standards for technical and inspection activities of importance to the petroleum industry will help to facilitate the increased mobility of skilled workers, while initiatives to develop a standard information disclosure and exchange format for all federal, provincial and territorial jurisdictions will address the conflicting regimes to which oil and gas products and services are subjected. 40 refs., 5 tabs.

Safety research programs sponsored by Office of Nuclear Regulatory Research: Progress report, July 1--September 30, 1988

Energy Technology Data Exchange (ETDEWEB)

Weiss, A J [comp.

1989-02-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through June 30, 1988. 71 figs., 24 tabs.

Safety research programs sponsored by Office of Nuclear Regulatory Research: Progress report, July 1--September 30, 1988

International Nuclear Information System (INIS)

Weiss, A.J.

1989-02-01

This progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the Division of Regulatory Applications, Division of Engineering, Division of Safety Issue Resolution, and Division of Systems of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research following the reorganization in July 1988. The previous reports have covered the period October 1, 1976 through June 30, 1988. 71 figs., 24 tabs

DOE standard: The Department of Energy Laboratory Accreditation Program for radiobioassay

International Nuclear Information System (INIS)

1998-12-01

This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the US Department of Energy (DOE) and DOE Contractor radiobioassay programs. This standard is intended to be used in conjunction with the general administrative technical standard that describes the overall DOELAP accreditation process--DOE-STD-1111-98, Department of Energy Laboratory Accreditation Program Administration. This technical standard pertains to radiobioassay service laboratories that provide either direct or indirect (in vivo or in vitro) radiobioassay measurements in support of internal dosimetry programs at DOE facilities or for DOE and DOE contractors. Similar technical standards have been developed for other DOELAP dosimetry programs. This program consists of providing an accreditation to DOE radiobioassay programs based on successful completion of a performance-testing process and an on-site evaluation by technical experts. This standard describes the technical requirements and processes specific to the DOELAP Radiobioassay Accreditation Program as required by 10 CFR 835 and as specified generically in DOE-STD-1111-98

Technical bases for regulatory review; comparison of practices, standards and guides

International Nuclear Information System (INIS)

Vinck, W.; Naurer, H.; Van Reijen, G.

1979-01-01

In first place, national licensing and regulatory scenes are presentd, as well as correlations between: a) Correlations and industrial standards; b) national and international developments. The purpose of harmonisation efforts and ongoing activities, especially within the EC, are highlighted. For the purpose of being sufficiently specific, three specific areas are dealt with as examples, explaining how actual application of practices and criteria in EC Member States correlate (or not) to one another including the points of convergence and divergences: protection against aircraft crash, seismic effects, protection against fuel handling accidents. Conclusive remarks deal with the origin in and relative importance of discrepancies in safety practices and criteria. (author)

SRS ES ampersand H standards compliance program management plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the Department of Energy (DOE), called for three actions: (1) identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; (2) assessment of the adequacy of those standards for protecting public health and safety; and (3) determination of the extent to which they have and are being implemented. This document defines the elements of the SRS program required to support the HQ program in response to DNFSB Recommendation 90-2. The objective is to ensure a consistent approach for all sitewide ES and H Standards Compliance Program efforts that satisfied the intent of Recommendation 90-2 and the HQ 90-2 Implementation Plan in a cost-effective manner. The methodology and instructions for implementation of the SRS program are contained in the Standards Compliance Program Implementation Plan. The Management Plan shall be used in conjunction with the Implementation Plan

78 FR 8544 - Training Program for Regulatory Project Managers; Information Available to Industry

Science.gov (United States)

2013-02-06

...] Training Program for Regulatory Project Managers; Information Available to Industry AGENCY: Food and Drug... Brum, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave... to industry's drug development processes and (2) a venue for sharing information about project...

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

International Nuclear Information System (INIS)

1993-03-01

The primary objective of the Early Site Plan Demonstration Program (ESPDP) is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. This document provides appendices A and B of this report. Appendix A contains a list of regulations, regulatory guidance, and acceptance criteria; Appendix B contains a cross-reference index of siting-related documentation

Regulatory activities related with the modification of the frequency of the programmed stoppings of the Argentine nuclear centrals

International Nuclear Information System (INIS)

Marino, E.; Calvo, J.; Waldman, R.; Navarro, R.

2006-01-01

The mandatory character documentation of the Argentinean nuclear power stations in Embalse and Atucha I, required the realization of a programmed stoppings every twelve months to execute that settled down in the maintenance and surveillance programs for each installation. Nucleoelectrica Argentina S.A., in it character of Responsible Entity of the operation of these power stations, requested to the Argentinean Nuclear Regulatory Authority, in 2003 and 2005 respectively, the authorization to change the period of the repetitive tests and of the preventive maintenance of the systems related with the safety, to extend them from twelve to eighteen months. The mentioned applications were founded in economic aspects and in inclining to a decrease in the doses of the workers that perform in the activities that are carried out in the programmed stops. The adopted position by the Nuclear Regulatory Authority to decide on these applications was based on the result of diverse evaluations that included the use of the Probabilistic Analysis of Safety specific of each power station, the operative experience resultant of the execution of the preventive maintenance program, and of the results of the repetitive tests and of the inspections in service. The regulatory decisions were different in each case. Indeed, the Embalse nuclear power station was authorized by the Regulatory Authority to modify from twelve to eighteen months the period among the realization of the repetitive tests and of the preventive maintenance, conditioned to the execution of some specific regulatory requirements. On the other hand, the Atucha I nuclear power station was not authorized to modify this period. In this presentation that is detailed the acted by the Nuclear Regulatory Authority in both cases, the used analysis tools, and the foundation of the adopted decisions. (Author)

76 FR 9028 - Training Program for Regulatory Project Managers; Information Available to Industry

Science.gov (United States)

2011-02-16

...] Training Program for Regulatory Project Managers; Information Available to Industry AGENCY: Food and Drug... Duvall-Miller, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire... to provide the following: (1) Firsthand exposure to industry's drug development processes and (2) a...

75 FR 10806 - Training Program for Regulatory Project Managers; Information Available to Industry

Science.gov (United States)

2010-03-09

...] Training Program for Regulatory Project Managers; Information Available to Industry AGENCY: Food and Drug... INFORMATION CONTACT: Beth Duvall-Miller, Center for Drug Evaluation and Research, Food and Drug Administration... to provide the following: (1) First hand exposure to industry's drug development processes and (2) a...

77 FR 10538 - Training Program for Regulatory Project Managers; Information Available to Industry

Science.gov (United States)

2012-02-22

...] Training Program for Regulatory Project Managers; Information Available to Industry AGENCY: Food and Drug... Brum, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave...) Firsthand exposure to industry's drug development processes and (2) a venue for sharing information about...

How Much Can Non-industry Standard Measurement Methodologies Benefit Methane Reduction Programs?

Science.gov (United States)

Risk, D. A.; O'Connell, L.; Atherton, E.

2017-12-01

In recent years, energy sector methane emissions have been recorded in large part by applying modern non-industry-standard techniques. Industry may lack the regulatory flexibility to use such techniques, or in some cases may not understand the possible associated economic advantage. As progressive jurisdictions move from estimation and towards routine measurement, the research community should provide guidance to help regulators and companies measure more effectively, and economically if possible. In this study, we outline a modelling experiment in which we explore the integration of non-industry-standard measurement techniques as part of a generalized compliance measurement program. The study was not intended to be exhaustive, or to recommend particular combinations, but instead to explore the inter-relationships between methodologies, development type, compliance practice. We first defined the role, applicable scale, detection limits, working distances, and approximate deployment cost of several measurement methodologies. We then considered a variety of development types differing mainly in footprint, density, and emissions "profile". Using a Monte Carlo approach, we evaluated the effect of these various factors on the cost and confidence of the compliance measurement program. We found that when added individually, some of the research techniques were indeed able to deliver an improvement in cost and/or confidence when used alongside industry-standard Optical Gas Imaging. When applied in combination, the ideal fraction of each measurement technique depended on development type, emission profile, and whether confidence or cost was more important. Results suggest that measurement cost and confidence could be improved if energy companies exploited a wider range of measurement techniques, and in a manner tailored to each development. In the short-term, combining clear scientific guidance with economic information could benefit immediate mitigation efforts over

Regulatory requirements for groundwater monitoring networks at hazardous waste sites

International Nuclear Information System (INIS)

Keller, J.F.

1989-10-01

In the absence of an explicit national mandate to protect groundwater quality, operators of active and inactive hazardous waste sites must use a number of statutes and regulations as guidance for detecting, correcting, and preventing groundwater contamination. The objective of this paper is to provide a framework of the technical and regulatory considerations that are important to the development of groundwater monitoring programs at hazardous waste sites. The technical site-specific needs and regulatory considerations, including existing groundwater standards and classifications, will be presented. 14 refs., 2 tabs

Nuclear Regulatory Infrastructure in the Philippines

International Nuclear Information System (INIS)

Leonin, Teofilo V. Jr.

2015-01-01

Regulating the use of radioactive materials in the Philippines involves the adherence to legislation, regulations, standards and regulatory guides. It is based on a detailed review and assessment of the radiation safety program of owners and users of these materials and associated equipment against safety requirements and on additional verification of the operating practices and procedures. Republic Acts 5207 and 2067, both as amended, are implemented through the regulations which are titled Code of PNRI Regulations or CPRs are developed and issued together with supporting regulatory guides, Bulletins and other documents detailing the safety requirements. These issuance adhere to internationally accepted requirements on radiation protection, and nuclear safety and security, as well as safeguards. Design documents and technical Specifications of important radioactive materials, equipment and components are required to be submitted and reviewed by the PNRI before the issuance of an authorization in the form of a license Verification of adherence to regulations and safety requirements are periodically checked through the implementation of an inspection and enforcement program. The ISO certified regulatory management system of PNRI is documented in a QMS manual that provides guidance on all work processes. It involves systematic planning and evaluation of activities, multiple means of getting feedback on the work processes, and continuous efforts to improve its effectiveness. Efforts are implemented in order to strengthen the transparency openness, independence, technical competence and effectiveness of the regulatory body. (author)

Foetal immune programming: hormones, cytokines, microbes and regulatory T cells.

Science.gov (United States)

Hsu, Peter; Nanan, Ralph

2014-10-01

In addition to genetic factors, environmental cues play important roles in shaping the immune system. The first environment that the developing foetal immune system encounters is the uterus. Although physically the mother and the foetus are separated by the placental membranes, various factors such as hormones and cytokines may provide "environmental cues" to the foetal immune system. Additionally, increasing evidence suggests that prenatal maternal environmental factors, particularly microbial exposure, might significantly influence the foetal immune system, affecting long-term outcomes, a concept termed foetal immune programming. Here we discuss the potential mediators of foetal immune programming, focusing on the role of pregnancy-related hormones, cytokines and regulatory T cells, which play a critical role in immune tolerance. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

78 FR 79567 - National School Lunch Program and School Breakfast Program: Nutrition Standards for All Foods...

Science.gov (United States)

2013-12-31

... Program: Nutrition Standards for All Foods Sold in Schools as Required by the Healthy, Hunger-Free Kids... interim rule entitled National School Lunch Program and School Breakfast Program: Nutrition Standards for..., 2013 / Rules and Regulations [[Page 79567

Preparation of safety regulatory requirements for new technology like digital system

International Nuclear Information System (INIS)

Ito, Juichiro; Takita, Masami

2011-01-01

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG (Digital Instrumentation and Control Working Group) of MDEP (Multinational Design Evaluation Program). MDEP DICWG held in OECD/NEA (Organisation for Economic Co-operation and Development/Nuclear Energy Agency) gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance regarding digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed upon process and framework. Five general common positions are under discussion in this fiscal year. Simplicity in Design, Software Common Cause Failures, Software Tools, Data communication, Verification and Validation throughout the life cycle of safety systems using digital computers. In addition, the technical evaluation of standards of the Japan Electric Association about digital system for safety was made to support NISA (Nuclear and Industrial Safety Agency). (author)

Verification of implementation of the radiological safety standards through the regulatory inspections

International Nuclear Information System (INIS)

Perez Gonzalez, Francisco; Fornet Rodriguez, Ofelia M.

2008-01-01

Full text: As an element of the updating process of the legal framework on radiological safety in Cuba, a new rule was put into force; the Radiological Basic Safety Standards (RBSS) in January 2002. Five years after the application of these new safety requirements, it was considered appropriate to assess the effectiveness of its implementation. Therefore, in this work the authors analysed the outcomes of the regulatory inspections conducted in this period upon medical and industrial practices in a sample of facilities representative of those with the highest radiological risks in the territory under supervision of a Territorial Delegation of the Nuclear Regulatory Authority. For better understanding of this presentation, a summary explanation of the structure of the rule is given in its introduction. The work was to identify for each deficiency, or finding, or counter-measure; out of the relevant inspections; the corresponding requirement/Article of the RBSS that shows difficulties in implementation. For each installation an analysis is made with regard to the relevant articles difficult to implement. Finally, the appraisal is shown separately for the medical practice, and for the industrial practice, and also in general for the whole sample of installations under review. The study showed that the implementation of the Standards has been satisfactory and uniform in the practices under review. So far it seems that there have not been major difficulties with the implementation of the Titles; III On Intervention, IV Dose Limits, as well as with the Especial, Final, and Transitory Dispositions. On the other hand, it is shown there is a need for continued work only with regard to the implementation of the requirements in Section IV Verification of Safety and in Section V On the responsibilities with regard to occupational exposure in Chapter III Title I, and correspondingly in Chapter II Occupational Exposure in Title II. It is recommended to conduct this kind of

Resolution of regulatory issues facing the DOE in situ vitrification program

International Nuclear Information System (INIS)

Corathers, L.A.

1992-03-01

In situ vitrification (ISV) is being developed by researchers at the Pacific Northwest Laboratory (PNL), Idaho National Engineering Laboratory (INEL), and Oak Ridge National Laboratory (ORNL) as a technology for remediating soils, underground storage tank residuals, and buried materials that have been contaminated with hazardous, radioactive, and mixed wastes (i.e., wastes containing both radioactive and hazardous wastes) at US Department of Energy (DOE) facilities. The goal of the DOE ISV technology development program (i.e., the ISV Integrated Program) is to ensure that ISV is a workable technology for environmental restoration applications for DOE and other agencies. A DOE complex-wide plan was prepared during Fiscal Year 1991 to coordinate all levels of activities associated with the deployment of ISV. As part of this plan, a programmatic regulatory strategy was developed which focused on the federal environmental, health, safety, and nuclear regulations, including the US Environmental Protection Agency (EPA) and DOE regulations, believed to have the most significant near-term impact on the use of ISV as a remediation technology. The portion of the programmatic regulatory strategy addressing compliance with the Comprehensive Environmental Response, Compensation and Liability Act, as amended, and the Resource Conservation and Recovery Act, as amended, is presented in this paper

A new standard for core training in radiation safety

International Nuclear Information System (INIS)

Trinoskey, P.A.

1997-02-01

A new American National Standard for radiation worker training was recently developed. The standard emphasizes performance-based training and establishing a training program rather than simply prescribing objectives. The standard also addresses basic criteria, including instructor qualifications. The standard is based on input from a wide array of regulatory agencies, universities, national laboratories, and nuclear power entities. This paper presents an overview of the new standard and the philosophy behind it. The target audience includes radiation workers, management and supervisory personnel, contractors, students, emergency personnel, and visitors

Regulatory inspection of BARC facilities

International Nuclear Information System (INIS)

Rajdeep; Jayarajan, K.

2017-01-01

Nuclear and radiation facilities are sited, constructed, commissioned, operated and decommissioned, in conformity with the current safety standards and codes. Regulatory bodies follow different means to ensure compliance of the standards for the safety of the personnel, the public and the environment. Regulatory Inspection (RI) is one of the important measures employed by regulatory bodies to obtain the safety status of a facility or project and to verify the fulfilment of the conditions stipulated in the consent

76 FR 50796 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Science.gov (United States)

2011-08-16

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing and Immediate Effectiveness of Proposed Rule Change To Increase the Position Limit for Options on the Standard and Poor's... Financial Industry Regulatory Authority, Inc. (``FINRA'') filed with the Securities and Exchange Commission...

Review of the Commission program for standardization of nuclear power plants and recommendations to improve standardization concepts

International Nuclear Information System (INIS)

1978-02-01

This is a report of a staff study describing the need and utility of specific changes to the Commission's standardization program. The various matters considered in the study include: (1) A discussion of industry use to date of the standardization program. (2) A discussion of the experience to date with each of the standardization concepts. (3) A review of public comments on the standardization program and the staff response to each principal comment. (4) A review of the need for standardization considering the likely number of license applications to be submitted in the coming years. (5) A discussion of the reference system concept, including review of applicable experience and recommended changes to the concept. (6) A discussion of the duplicate plant concept, including review of applicable experience and recommended changes to the concept. (7) A discussion of the manufacturing license concept, including review of applicable experience and recommended changes to the concept. (8) A discussion of the replicate plant concept, including review of applicable experience and recommended changes to the concept. (9) A discussion of the effective periods for approved designs under all four standardization concepts. (10) A description of continuing staff activities related to the standardization program

Current role of the USNRC safety research program in support of the regulatory process

International Nuclear Information System (INIS)

Levine, S.

1979-01-01

The current role of the USNRC's safety research program is shown. Some aspects of this role in the wake of the TMI accident are discused as well as some historical perspective on the development of USNRC's program, its relationship with the NRC mission, an overview of the program activities and some recent research results, and finally the impact of the TMI accident in clarifiying needs for expedited and new research activities, including the need for a greatly enhanced use of probabilistic analysis techniques to improve the coherence of its regulatory process. (author)

Interim radiological safety standards and evaluation procedures for subseabed high-level waste disposal

International Nuclear Information System (INIS)

Klett, R.D.

1997-06-01

The Seabed Disposal Project (SDP) was evaluating the technical feasibility of high-level nuclear waste disposal in deep ocean sediments. Working standards were needed for risk assessments, evaluation of alternative designs, sensitivity studies, and conceptual design guidelines. This report completes a three part program to develop radiological standards for the feasibility phase of the SDP. The characteristics of subseabed disposal and how they affect the selection of standards are discussed. General radiological protection standards are reviewed, along with some new methods, and a systematic approach to developing standards is presented. The selected interim radiological standards for the SDP and the reasons for their selection are given. These standards have no legal or regulatory status and will be replaced or modified by regulatory agencies if subseabed disposal is implemented. 56 refs., 29 figs., 15 tabs

Dismantlement of nuclear facilities decommissioned from the Russian navy: Enhancing regulatory supervision of nuclear and radiation safety

International Nuclear Information System (INIS)

Sneve, M.K.

2013-01-01

The availability of up to date regulatory norms and standards for nuclear and radiation safety, relevant to the management of nuclear legacy situations, combined with effective and efficient regulatory procedures for licensing and monitoring compliance, are considered to be extremely important. Accordingly the NRPA has set up regulatory cooperation programs with corresponding authorities in the Russian Federation. Cooperation began with the civilian regulatory authorities and was more recently extended to include the military authority and this joint cooperation supposed to develop the regulatory documents to improve supervision over nuclear and radiation safety while managing the nuclear military legacy facilities in Northwest Russia and other regions of the country. (Author)

Dismantlement of nuclear facilities decommissioned from the Russian navy: Enhancing regulatory supervision of nuclear and radiation safety

Energy Technology Data Exchange (ETDEWEB)

Sneve, M.K.

2013-03-01

The availability of up to date regulatory norms and standards for nuclear and radiation safety, relevant to the management of nuclear legacy situations, combined with effective and efficient regulatory procedures for licensing and monitoring compliance, are considered to be extremely important. Accordingly the NRPA has set up regulatory cooperation programs with corresponding authorities in the Russian Federation. Cooperation began with the civilian regulatory authorities and was more recently extended to include the military authority and this joint cooperation supposed to develop the regulatory documents to improve supervision over nuclear and radiation safety while managing the nuclear military legacy facilities in Northwest Russia and other regions of the country. (Author)

75 FR 7556 - Energy Efficiency Standards for Manufactured Housing

Science.gov (United States)

2010-02-22

... climatic differences should be addressed through a singular energy standard addressing manufactured homes... (e.g., ENERGY STAR) and/or the analysis that DOE should conduct in assessing such programs. (10... has concluded its review. DOE intends to develop a regulatory impact analysis (RIA), also identified...

Development of Standards for Textiles and Clothing Postsecondary Programs. Final Report.

Science.gov (United States)

Iowa State Univ. of Science and Technology, Ames. Dept. of Home Economics Education.

A project was conducted to validate program standards and performance standards for four postsecondary occupational areas--fashion merchandising, fashion design, apparel, and window treatment services. Returns from 117 questionnaires from postsecondary institutions in fifty states were used to develop program standards statements and to provide…

Leak-Before-Break: Further developments in regulatory policies and supporting research

International Nuclear Information System (INIS)

Wilkowski, G.M.; Chao, K.-S.

1990-02-01

The fourth in a series of international Leak-Before-Break (LBB) Seminars supported in part by the US Nuclear Regulatory Commission was held at the National Central Library in Taipei, Taiwan on May 11 and 12, 1989. The seminar updated the international polices and supporting research on LBB. Attendees included representatives from regulatory agencies, electric utilities, nuclear power plant fabricators, research organizations, and academic institutions. Regulatory policy was the subject of presentations by Mr. G. Arlotto (US NRC, USA) Dr. B. Jarman (AECB, Canada), Dr.P. Milella (ENEA-DISP, Italy), Dr. C. Faidy (EDF/Septen, France ), and Dr. K. Takumi (NUPEC, Japan). A paper by Mr. K. Wichman and Mr. A. Lee of the US NRC Office of Nuclear Reactor Regulation is included as background material to these proceedings; it discusses the history and status of LBB applications in US nuclear power plants. In addition, several papers on the supporting research programs described regulatory policy or industry standards for flaw evaluations, e.g., the ASME Section XI code procedures. Supporting research programs were reviewed on the first and second day by several participants from Taiwan, US, Japan, Canada, Italy, and France. Each individual paper has been cataloged separately

Regulatory Aspect of an Ageing Management Program

International Nuclear Information System (INIS)

Basic, I.; Zabric, I.; Savli, S.

2006-01-01

The aspects of plant ageing management (AM) gained increasing attention over the last ten years. Numerous technical studies have been performed to study the impact of ageing mechanisms on the safe and reliable operation of nuclear power plants. National research activities have been initiated or are in progress to provide the technical basis for decision making processes. The long-term operation of nuclear power plants is influenced by economic considerations, the socio-economic environment including public acceptance, developments in research and the regulatory framework, the availability of technical infrastructure to maintain and service the systems, structures and components as well as qualified personnel. Besides national activities there are a number of international activities in particular under the umbrella of the IAEA, the OECD and the EU. The paper will provide the summary on Nuclear Plant Life Management (PLIM) (or Ageing Management Program (AMP)) and Plant Life Extension (PLEX) development in USA and European countries. Also, insights from such effort currently performing in Slovenia will be discussed.(author)

Minimum Information about T Regulatory Cells: A Step toward Reproducibility and Standardization

Directory of Open Access Journals (Sweden)

Anke Fuchs

2018-01-01

Full Text Available Cellular therapies with CD4+ T regulatory cells (Tregs hold promise of efficacious treatment for the variety of autoimmune and allergic diseases as well as posttransplant complications. Nevertheless, current manufacturing of Tregs as a cellular medicinal product varies between different laboratories, which in turn hampers precise comparisons of the results between the studies performed. While the number of clinical trials testing Tregs is already substantial, it seems to be crucial to provide some standardized characteristics of Treg products in order to minimize the problem. We have previously developed reporting guidelines called minimum information about tolerogenic antigen-presenting cells, which allows the comparison between different preparations of tolerance-inducing antigen-presenting cells. Having this experience, here we describe another minimum information about Tregs (MITREG. It is important to note that MITREG does not dictate how investigators should generate or characterize Tregs, but it does require investigators to report their Treg data in a consistent and transparent manner. We hope this will, therefore, be a useful tool facilitating standardized reporting on the manufacturing of Tregs, either for research purposes or for clinical application. This way MITREG might also be an important step toward more standardized and reproducible testing of the Tregs preparations in clinical applications.

Identifying Strategies Programs Adopt to Meet Healthy Eating and Physical Activity Standards in Afterschool Programs.

Science.gov (United States)

Weaver, Robert G; Moore, Justin B; Turner-McGrievy, Brie; Saunders, Ruth; Beighle, Aaron; Khan, M Mahmud; Chandler, Jessica; Brazendale, Keith; Randell, Allison; Webster, Collin; Beets, Michael W

2017-08-01

The YMCA of USA has adopted Healthy Eating and Physical Activity (HEPA) Standards for its afterschool programs (ASPs). Little is known about strategies YMCA ASPs are implementing to achieve Standards and these strategies' effectiveness. (1) Identify strategies implemented in YMCA ASPs and (2) evaluate the relationship between strategy implementation and meeting Standards. HEPA was measured via accelerometer (moderate-to-vigorous-physical-activity [MVPA]) and direct observation (snacks served) in 20 ASPs. Strategies were identified and mapped onto a capacity building framework ( Strategies To Enhance Practice [STEPs]). Mixed-effects regression estimated increases in HEPA outcomes as implementation increased. Model-implied estimates were calculated for high (i.e., highest implementation score achieved), moderate (median implementation score across programs), and low (lowest implementation score achieved) implementation for both HEPA separately. Programs implemented a variety of strategies identified in STEPs. For every 1-point increase in implementation score 1.45% (95% confidence interval = 0.33% to 2.55%, p ≤ .001) more girls accumulated 30 min/day of MVPA and fruits and/or vegetables were served on 0.11 more days (95% confidence interval = 0.11-0.45, p ≤ .01). Relationships between implementation and other HEPA outcomes did not reach statistical significance. Still regression estimates indicated that desserts are served on 1.94 fewer days (i.e., 0.40 vs. 2.34) in the highest implementing program than the lowest implementing program and water is served 0.73 more days (i.e., 2.37 vs. 1.64). Adopting HEPA Standards at the national level does not lead to changes in routine practice in all programs. Practical strategies that programs could adopt to more fully comply with the HEPA Standards are identified.

Mission Risk Reduction Regulatory Change Management

Science.gov (United States)

Scroggins, Sharon

2007-01-01

NASA Headquarters Environmental Management Division supports NASA's mission to pioneer the future in space exploration, scientific discovery, and aeronautics research by integrating environmental considerations into programs and projects early-on, thereby proactively reducing NASA's exposure to institutional, programmatic and operational risk. As part of this effort, NASA established the Principal Center for Regulatory Risk Analysis and Communication (RRAC PC) as a resource for detecting, analyzing, and communicating environmental regulatory risks to the NASA stakeholder community. The RRAC PC focuses on detecting emerging environmental regulations and other operational change drivers that may pose risks to NASA programs and facilities, and effectively communicating the potential risks. For example, regulatory change may restrict how and where certain activities or operations may be conducted. Regulatory change can also directly affect the ability to use certain materials by mandating a production phase-out or restricting usage applications of certain materials. Regulatory change can result in significant adverse impacts to NASA programs and facilities due to NASA's stringent performance requirements for materials and components related to human-rated space vehicles. Even if a regulation does not directly affect NASA operations, U.S. and international regulations can pose program risks indirectly through requirements levied on manufacturers and vendors of components and materials. For example, manufacturers can change their formulations to comply with new regulatory requirements. Such changes can require time-consuming and costly requalification certification for use in human spaceflight programs. The RRAC PC has implemented a system for proactively managing regulatory change to minimize potential adverse impacts to NASA programs and facilities. This presentation highlights the process utilized by the RRACPC to communicate regulatory change and the associated

Suggested state requirements and criteria for a low-level radioactive waste disposal site regulatory program

International Nuclear Information System (INIS)

Ratliff, R.A.; Dornsife, B.; Autry, V.; Gronemyer, L.; Vaden, J.; Cashman, T.

1985-08-01

Description of criteria and procedure is presented for a state to follow in the development of a program to regulate a LLW disposal site. This would include identifying those portions of the NRC regulations that should be matters of compatibility, identifying the various expertise and disciplines that will be necessary to effectively regulate a disposal site, identifying the resources necessary for conducting a confirmatory monitoring program, and providing suggestions in other areas which, based on experiences, would result in a more effective regulatory program

SRS ES and H Standards Compliance Program Implementation Plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the U.S. Department of Energy (DOE), called for three actions: identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; assessment of the adequacy of those standards for protecting public health and safety; and determination of the extent to which they have and are being implemented. The purpose of this Implementation Plan is to define the single program for all sitewide and facility 90-2 ES and H Standards Compliance efforts, which will satisfy the HQ Implementation Plan, avoid duplicate efforts, be as simple and achievable as possible, include cost-saving innovations, use a graded approach based on facility hazards and future needs of facilities, and support configuration control for facility requirements. The Defense Waste Processing Facility (DWPF) has been designated a pilot facility for the 90-2 program and has progressed with their facility program ahead of the site-level program. The DWPF, and other Government-Owned Contractor-Operated (GOCO) facilities that progress on an enhanced schedule, will serve as pilot facilities for the site-level program. The lessons learned with their requirement identifications, and their assessments of the adequacy of and their compliance with these requirements will be used to improve the efficiency of the site-level and subsequent programs

US Department of Energy wind turbine candidate site program: the regulatory process

Energy Technology Data Exchange (ETDEWEB)

Greene, M.R.; York, K.R.

1982-06-01

Sites selected in 1979 as tentative sites for installation of a demonstration MOD-2 turbine are emphasized. Selection as a candidate site in this program meant that the US Department of Energy (DOE) designated the site as eligible for a DOE-purchased and installed meteorological tower. The regulatory procedures involved in the siting and installation of these meteorological towers at the majority of the candidate sites are examined. An attempt is also made, in a preliminary fashion, to identify the legal and regulatory procedures that would be required to put up a turbine at each of these candidate sites. The information provided on each of these sites comes primarily from utility representatives, supplemented by conversations with state and local officials. The major findings are summarized on the following: federal requirements, state requirements, local requirements, land ownership, wind rights, and public attitudes.

Regulatory guidance document

International Nuclear Information System (INIS)

1994-05-01

The Office of Civilian Radioactive Waste Management (OCRWM) Program Management System Manual requires preparation of the OCRWM Regulatory Guidance Document (RGD) that addresses licensing, environmental compliance, and safety and health compliance. The document provides: regulatory compliance policy; guidance to OCRWM organizational elements to ensure a consistent approach when complying with regulatory requirements; strategies to achieve policy objectives; organizational responsibilities for regulatory compliance; guidance with regard to Program compliance oversight; and guidance on the contents of a project-level Regulatory Compliance Plan. The scope of the RGD includes site suitability evaluation, licensing, environmental compliance, and safety and health compliance, in accordance with the direction provided by Section 4.6.3 of the PMS Manual. Site suitability evaluation and regulatory compliance during site characterization are significant activities, particularly with regard to the YW MSA. OCRWM's evaluation of whether the Yucca Mountain site is suitable for repository development must precede its submittal of a license application to the Nuclear Regulatory Commission (NRC). Accordingly, site suitability evaluation is discussed in Chapter 4, and the general statements of policy regarding site suitability evaluation are discussed in Section 2.1. Although much of the data and analyses may initially be similar, the licensing process is discussed separately in Chapter 5. Environmental compliance is discussed in Chapter 6. Safety and Health compliance is discussed in Chapter 7

Family Violence Prevention and Services Programs. Final rule.

Science.gov (United States)

2016-11-02

This rule will better prevent and protect survivors of family violence, domestic violence, and dating violence, by clarifying that all survivors must have access to services and programs funded under the Family Violence Prevention and Services Act. More specifically, the rule enhances accessibility and non-discrimination provisions, clarifies confidentiality rules, promotes coordination among community-based organizations, State Domestic Violence Coalitions, States, and Tribes, as well as incorporates new discretionary grant programs. Furthermore, the rule updates existing regulations to reflect statutory changes made to the Family Violence Prevention and Services Act, and updates procedures for soliciting and awarding grants. The rule also increases clarity and reduces potential confusion over statutory and regulatory standards. The rule codifies standards already used by the program in the Funding Opportunity Announcements and awards, in technical assistance, in reporting requirements, and in sub-regulatory guidance.

Department of Energy Nuclear Energy Standards Program

International Nuclear Information System (INIS)

Silver, E.G.

1980-01-01

The policy with respect to the development and use of standards in the Department of Energy (DOE) programs concerned with maintaining and developing the nuclear option for the civilian sector (both in the form of the currently used light water reactors and for advanced concepts including the Liquid Metal Fast Breeder Reactor), is embodied in a Nuclear Standards Policy, issued in 1978, whose perspectives and philosophy are discussed

Standard Review Plan Maintenance Program implementing procedures document

International Nuclear Information System (INIS)

1996-11-01

The implementing Procedures Document (IPD) was developed by the Inspection Program Projects Branch, Office of Nuclear Reactor Regulation, with assistance from Pacific Northwest National Laboratory, for the Standard Review Plan Maintenance Program (SRP-MP). The SRP-MP was established to maintain the Standard Review Plan (SRP) on an on-going basis. The IPD provides guidance, including an overall approach and procedures, for SRP-MP tasks. The objective of the IPD is to ensure that modifications to SRP need to reflect current NRC requirements and guidance are identified and that a consistent methodology is used to develop and revise SRP sections

Safety implications of standardized continuous quality improvement programs in community pharmacy.

Science.gov (United States)

Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

2013-06-01

Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

Opinions of practitioners and program directors concerning accreditation standards for postdoctoral pediatric dentistry training programs.

Science.gov (United States)

Casamassimo, P S; Wilson, S

1999-01-01

This study was performed to assess opinions of program directors and practitioners about the importance and necessary numbers of experiences required by current accreditation standards for training of pediatric dentists. A 32-item questionnaire was sent to all program directors of ADA-accredited postdoctoral pediatric dentistry training programs and to a random sample of 10% of the fellow/active membership of the American Academy of Pediatric Dentistry. An overall response rate of 56% was obtained from the single mailing. Practitioners and program directors differed significantly (P dentistry: initiating and completing a research paper, biostatistics/epidemiology, and practice management. Program directors had little difficulty obtaining required experiences, and program dependence on Medicaid did not negatively affect quality of education. Practitioners and program directors agreed on the importance of most experiences and activities required by current accreditation standards.

The regulatory framework of accounting and accounting standard-setting bodies in the European Union member states

OpenAIRE

Mamić-Sačer, Ivana

2015-01-01

One of the principal features of accounting in the 21st century is harmonisation and stanardisation. Regulation of the European Parliament and European Council No. 1606/2002 harmonizes financial reporting for certain companies in the EU. However, national accounting principles are of great importance for financial reporting. The main purpose of this research was to investigate the application of generally accepted accounting principles, the regulatory accounting framework and the standard-set...

Regulatory viewpoint on nuclear fuel quality assurance

International Nuclear Information System (INIS)

Tripp, L.E.

1976-01-01

Considerations of the importance of fuel quality and performance to nuclear safety, ''as low reasonably achievable'' release of radioactive materials in reactor effluents, and past fuel performance problems demonstrate the need for strong regulatory input, review and inspection of nuclear fuel quality assurance programs at all levels. Such a regulatory program is being applied in the United States of America by the US Nuclear Regulatory Commission. Quality assurance requirements are contained within government regulations. Guidance on acceptable methods of implementing portions of the quality assurance program is contained within Regulatory Guides and other NRC documents. Fuel supplier quality assurance program descriptions are reviewed as a part of the reactor licensing process. Inspections of reactor licensee control of their fuel vendors as well as direct inspections of fuel vendor quality assurance programs are conducted on a regularly scheduled basis. (author)

A framework for regulatory requirements and industry standards for new nuclear power plants

International Nuclear Information System (INIS)

Duran, Felicia A.; Camp, Allen L.; Apostolakis, George E.; Golay, Michael W.

2000-01-01

This paper summarizes the development of a framework for risk-based regulation and design for new nuclear power plants. Probabilistic risk assessment methods and a rationalist approach to defense in depth are used to develop a framework that can be applied to identify systematically the regulations and standards required to maintain the desired level of safety and reliability. By implementing such a framework, it is expected that the resulting body of requirements will provide a regulatory environment that will ensure protection of the public, will eliminate the burden of requirements that do not contribute significantly to safety, and thereby will improve the market competitiveness of new plants. (author)

USL/DBMS NASA/PC R and D project C programming standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

A set of programming standards intended to promote reliability, readability, and portability of C programs written for PC research and development projects is established. These standards must be adhered to except where reasons for deviation are clearly identified and approved by the PC team. Any approved deviation from these standards must also be clearly documented in the pertinent source code.

High-level waste program management: A ratepayers' and regulatory perspective

International Nuclear Information System (INIS)

Anderson, E.G.

1986-01-01

The nation's electric utility regulators have joined the effort to enhance the federal project to dispose of high-level nuclear waste. Because all financial support comes from ratepayers, the National Association of Regulatory Utility Commissioners (NARUC), through the mechanism of a subcommittee, seeks to investigate and monitor the federal program to provide to the Congress and the U.S. Department of Energy (DOE) the NARUC's unique expertise. Its views to enhance program management and improve cost control are its central contribution. While conveying no lack of confidence in the federal management, the NARUC is imparting its relevant experience derived from review of nuclear power plant construction and cost control. Recommendations are made for more cost-effective program direction and views on its management are given. Financial control, public input and cost responsibilities for disposal of defense and commercial wastes are separately identified. Needs for the DOE's heightened insight into and development of the monitored retrievable storage proposal to the Congress are described. Finally, with a warning that there exists a limit to ratepayer funding of this effort, the request is made for Congressional cost-control hearings and for expanded dialogue between the Department of Engery and financially responsible parties

Survey of international personnel radiation dosimetry programs

International Nuclear Information System (INIS)

Swaja, R.E.

1985-04-01

In September of 1983, a mail survey was conducted to determine the status of external personnel gamma and neutron radiation dosimetry programs at international agencies. A total of 130 agencies participated in this study including military, regulatory, university, hospital, laboratory, and utility facilities. Information concerning basic dosimeter types, calibration sources, calibration phantoms, corrections to dosimeter responses, evaluating agencies, dose equivalent reporting conventions, ranges of typical or expected dose equivalents, and degree of satisfaction with existing systems was obtained for the gamma and neutron personnel monitoring programs at responding agencies. Results of this survey indicate that to provide the best possible occupational radiation monitoring programs and to improve dosimetry accuracy in performance studies, facility dosimetrists, regulatory and standards agencies, and research laboratories must act within their areas of responsibility to become familiar with their radiation monitoring systems, establish common reporting guidelines and performance standards, and provide opportunities for dosimetry testing and evaluation. 14 references, 10 tables

Research reactor standards and their impact on the TRIGA reactor community

International Nuclear Information System (INIS)

Richards, W.J.

1980-01-01

The American Nuclear Society has established a standards committee devoted to writing standards for research reactors. This committee was formed in 1971 and has since that time written over 15 standards that cover all aspects of research reactor operation. The committee has representation from virtually every group concerned with research reactors and their operation. This organization includes University reactors, National laboratory reactors, Nuclear Regulatory commission, Department of Energy and private nuclear companies and insurers. Since its beginning the committee has developed standards in the following areas: Standard for the development of technical specifications for research reactors; Quality control for plate-type uranium-aluminium fuel elements; Records and reports for research reactors; Selection and training of personnel for research reactors; Review of experiments for research reactors; Research reactor site evaluation; Quality assurance program requirements for research reactors; Decommissioning of research reactors; Radiological control at research reactor facilities; Design objectives for and monitoring of systems controlling research reactor effluents; Physical security for research reactor facilities; Criteria for the reactor safety systems of research reactors; Emergency planning for research reactors; Fire protection program requirements for research reactors; Standard for administrative controls for research reactors. Besides writing the above standards, the committee is very active in using communications with the nuclear regulatory commission on proposed rules or positions which will affect the research reactor community

Strengthening Regulatory Competence in Pakistan

International Nuclear Information System (INIS)

Sadiq, M.

2016-01-01

Capacity building of Pakistan Nuclear Regulatory Authority is considered an essential element in pursuit of its vision to become a world class regulatory body. Since its inception in 2001, PNRA has continuously endeavoured to invest in its people, develop training infrastructure and impart sound knowledge and professional skills with the aim to improve its regulatory effectiveness. The use of nuclear and radioactive material in Pakistan has increased manifold in recent years, thus induction of more manpower was needed for regulatory oversight. PNRA adopted two pronged approach for meeting the manpower demand (a) employment of university graduates through fast track recruitment drive and (b) induction of graduates by offering fellowships for Master degree programs. Although, the newly employed staff was selected on the basis of their excellent academic qualifications in basic and applied sciences, but they required rigorous knowledge and skills in regulatory perspectives. In order to implement a structured training program, PNRA conducted Training Needs Assessment (TNA) and identified competency gaps of the regulatory staff in legal, technical, regulatory practice and behavioural domains. PNRA took several initiatives for capacity building which included establishment of a training centre for sustainability of trainings, initiation of a fellowship scheme for Master program, attachment of staff at local institutes for on-the-job training and placement at foreign regulatory bodies and organizations for technical development with the assistance of IAEA. The above strategies have been very beneficial in competence building of the PNRA staff to perform all regulatory activities indigenously for nuclear power plants, research reactors and radiation facilities. Provision of vibrant technical support to IAEA and Member States in various programs by PNRA is a landmark of these competence development efforts. This paper summarizes PNRA initiatives and the International Atomic

The regulatory system of monitoring workers in Germany for intakes of radioactivity

International Nuclear Information System (INIS)

Dalheimer, A.; Henrichs, K.

1996-01-01

In Germany, the working group 'Incorporation Monitoring' of the German-Swiss Radiation Protection Association defined a new standard for the monitoring of workers occupationally exposed to radioactive material. During the last two years this draft has been accepted by the German government in the form of three guidelines. The purpose of the approach was the installation of a consistent state-of-the-art system: defining clear criteria for the necessity of routine and special monitoring programs, giving guidelines for monitoring programs ensuring that dose assessments are as reliable as necessary with the lowest possible expenses, standardizing as far as possible the procedures of dose assessments, and guaranteeing the necessary quality standards. The scientific basis of this regulatory system are the publications 30 and 54 of lCRP. (author)

Evidence for deep regulatory similarities in early developmental programs across highly diverged insects.

Science.gov (United States)

Kazemian, Majid; Suryamohan, Kushal; Chen, Jia-Yu; Zhang, Yinan; Samee, Md Abul Hassan; Halfon, Marc S; Sinha, Saurabh

2014-09-01

Many genes familiar from Drosophila development, such as the so-called gap, pair-rule, and segment polarity genes, play important roles in the development of other insects and in many cases appear to be deployed in a similar fashion, despite the fact that Drosophila-like "long germband" development is highly derived and confined to a subset of insect families. Whether or not these similarities extend to the regulatory level is unknown. Identification of regulatory regions beyond the well-studied Drosophila has been challenging as even within the Diptera (flies, including mosquitoes) regulatory sequences have diverged past the point of recognition by standard alignment methods. Here, we demonstrate that methods we previously developed for computational cis-regulatory module (CRM) discovery in Drosophila can be used effectively in highly diverged (250-350 Myr) insect species including Anopheles gambiae, Tribolium castaneum, Apis mellifera, and Nasonia vitripennis. In Drosophila, we have successfully used small sets of known CRMs as "training data" to guide the search for other CRMs with related function. We show here that although species-specific CRM training data do not exist, training sets from Drosophila can facilitate CRM discovery in diverged insects. We validate in vivo over a dozen new CRMs, roughly doubling the number of known CRMs in the four non-Drosophila species. Given the growing wealth of Drosophila CRM annotation, these results suggest that extensive regulatory sequence annotation will be possible in newly sequenced insects without recourse to costly and labor-intensive genome-scale experiments. We develop a new method, Regulus, which computes a probabilistic score of similarity based on binding site composition (despite the absence of nucleotide-level sequence alignment), and demonstrate similarity between functionally related CRMs from orthologous loci. Our work represents an important step toward being able to trace the evolutionary history of gene

Evidence for Deep Regulatory Similarities in Early Developmental Programs across Highly Diverged Insects

Science.gov (United States)

Zhang, Yinan; Samee, Md. Abul Hassan; Halfon, Marc S.; Sinha, Saurabh

2014-01-01

Many genes familiar from Drosophila development, such as the so-called gap, pair-rule, and segment polarity genes, play important roles in the development of other insects and in many cases appear to be deployed in a similar fashion, despite the fact that Drosophila-like “long germband” development is highly derived and confined to a subset of insect families. Whether or not these similarities extend to the regulatory level is unknown. Identification of regulatory regions beyond the well-studied Drosophila has been challenging as even within the Diptera (flies, including mosquitoes) regulatory sequences have diverged past the point of recognition by standard alignment methods. Here, we demonstrate that methods we previously developed for computational cis-regulatory module (CRM) discovery in Drosophila can be used effectively in highly diverged (250–350 Myr) insect species including Anopheles gambiae, Tribolium castaneum, Apis mellifera, and Nasonia vitripennis. In Drosophila, we have successfully used small sets of known CRMs as “training data” to guide the search for other CRMs with related function. We show here that although species-specific CRM training data do not exist, training sets from Drosophila can facilitate CRM discovery in diverged insects. We validate in vivo over a dozen new CRMs, roughly doubling the number of known CRMs in the four non-Drosophila species. Given the growing wealth of Drosophila CRM annotation, these results suggest that extensive regulatory sequence annotation will be possible in newly sequenced insects without recourse to costly and labor-intensive genome-scale experiments. We develop a new method, Regulus, which computes a probabilistic score of similarity based on binding site composition (despite the absence of nucleotide-level sequence alignment), and demonstrate similarity between functionally related CRMs from orthologous loci. Our work represents an important step toward being able to trace the evolutionary

Environmental protection and regulatory compliance at the Elk Hills field

International Nuclear Information System (INIS)

Chappelle, H.H.; Donahoe, R.L.; Kato, T.T.; Ordway, H.E.

1991-01-01

Environmental protection has played an integral role in the development and operation of the Elk Hills field since production at the maximum efficient rate was authorized in 1976. The field is located in a non-attainment area for California and National Ambient Air Quality Standards for two criteria pollutants and their associated precursors, is home to four endangered species, and operates within the California regulatory framework. Environmental protection and regulatory compliance is a multi-faceted program carried out through a substantial commitment of resources and workforce involvement. This paper describes the actions taken and resources employed to protect the environment, specific technologies and projects implemented, and the ongoing nature of these efforts at Elk Hills

Preliminary Safety Information Document for the Standard MHTGR. Volume 1, (includes latest Amendments)

Energy Technology Data Exchange (ETDEWEB)

None

1986-01-01

With NRC concurrence, the Licensing Plan for the Standard HTGR describes an application program consistent with 10CFR50, Appendix O to support a US Nuclear Regulatory Commission (NRC) review and design certification of an advanced Standard modular High Temperature Gas-Cooled Reactor (MHTGR) design. Consistent with the NRC's Advanced Reactor Policy, the Plan also outlines a series of preapplication activities which have as an objective the early issuance of an NRC Licensability Statement on the Standard MHTGR conceptual design. This Preliminary Safety Information Document (PSID) has been prepared as one of the submittals to the NRC by the US Department of Energy in support of preapplication activities on the Standard MHTGR. Other submittals to be provided include a Probabilistic Risk Assessment, a Regulatory Technology Development Plan, and an Emergency Planning Bases Report.

Air Emissions Damages from Municipal Drinking Water Treatment Under Current and Proposed Regulatory Standards.

Science.gov (United States)

Gingerich, Daniel B; Mauter, Meagan S

2017-09-19

Water treatment processes present intersectoral and cross-media risk trade-offs that are not presently considered in Safe Drinking Water Act regulatory analyses. This paper develops a method for assessing the air emission implications of common municipal water treatment processes used to comply with recently promulgated and proposed regulatory standards, including concentration limits for, lead and copper, disinfection byproducts, chromium(VI), strontium, and PFOA/PFOS. Life-cycle models of electricity and chemical consumption for individual drinking water unit processes are used to estimate embedded NO x , SO 2 , PM 2.5 , and CO 2 emissions on a cubic meter basis. We estimate air emission damages from currently installed treatment processes at U.S. drinking water facilities to be on the order of $500 million USD annually. Fully complying with six promulgated and proposed rules would increase baseline air emission damages by approximately 50%, with three-quarters of these damages originating from chemical manufacturing. Despite the magnitude of these air emission damages, the net benefit of currently implemented rules remains positive. For some proposed rules, however, the promise of net benefits remains contingent on technology choice.

Savannah River Site peer evaluator standards: Operator assessment for restart

International Nuclear Information System (INIS)

1990-01-01

Savannah River Site has implemented a Peer Evaluator program for the assessment of certified Central Control Room Operators, Central Control Room Supervisors and Shift Technical Engineers prior to restart. This program is modeled after the nuclear Regulatory Commission's (NRC's) Examiner Standard, ES-601, for the requalification of licensed operators in the commercial utility industry. It has been tailored to reflect the unique differences between Savannah River production reactors and commercial power reactors

DOE standard: The Department of Energy Laboratory Accreditation Program administration

International Nuclear Information System (INIS)

1998-12-01

This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP), organizational responsibilities, and the accreditation process. DOELAP evaluates and accredits personnel dosimetry and radiobioassay programs used for worker monitoring and protection at DOE and DOE contractor sites and facilities as required in Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection. The purpose of this technical standard is to establish procedures for administering DOELAP and acquiring accreditation

Annual Report 2010. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2010-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across six chapters and seven annexes the activities developed by the organism during 2010. The main topic are: institutional issues; regulatory guides and standards; argentinean nuclear regulatory system; quality assurance of the ARN; the institutional communications; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the safeguards and the physical protection; the environmental control; the institutional relations; the training and the public information. Also, this publication have annexes with the following content: the regulatory framework; regulatory documents; inspections to medical, industrial and training installations; measurement and evaluation of the drinking water of Ezeiza; international expert's report on the application of the international standards of radiological protection of the public in the zone of the Ezeiza Atomic Center; ethical code

Annual Report 2011. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2011-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across six chapters and seven annexes the activities developed by the organism during 2011. The main topic are: institutional issues; regulatory guides and standards; argentinean nuclear regulatory system; quality assurance of the ARN; the institutional communications; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the safeguards and the physical protection; the environmental control; the institutional relations; the training and the public information. Also, this publication have annexes with the following content: the regulatory framework; regulatory documents; inspections to medical, industrial and training installations; measurement and evaluation of the drinking water of Ezeiza; international expert's report on the application of the international standards of radiological protection of the public in the zone of the Ezeiza Atomic Center; ethical code

A method for developing standard patient education program

DEFF Research Database (Denmark)

Lura, Carolina Bryne; Hauch, Sophie Misser Pallesgaard; Gøeg, Kirstine Rosenbeck

2018-01-01

for developing standard digital patient education programs for patients in self-administration of blood samples drawn from CVC. The Design Science Research Paradigm was used to develop a digital patient education program, called PAVIOSY, to increase patient safety during execution of the blood sample collection...... of the educational patient system, health professionals must be engaged early in the development of content and design phase....

Assessment of the Japanese Energy Efficiency Standards Program

Directory of Open Access Journals (Sweden)

Jun Arakawa

2015-03-01

Full Text Available Japanese energy efficiency standards program for appliances is a unique program which sets and revises mandatory standards based on the products of the highest energy efficiency on the markets. This study assessed the cost-effectiveness of the standard settings for air conditioner as a major residential appliance or typical example in the program. Based on analyses of empirical data, the net costs and effects from 1999 to 2040 were estimated. When applying a discount rate of 3%, the cost of abating CO2 emissions realized through the considered standards was estimated to be -13700 JPY/t-CO2. The sensitivity analysis, however, showed the cost turns into positive at a discount rate of 26% or higher. The authors also revealed that the standards’ “excellent” cost-effectiveness largely depends on that of the 1st standard setting, and the CO2 abatement cost through the 2nd standard was estimated to be as high as 26800 JPY/t-CO2. The results imply that the government is required to be careful about the possible economic burden imposed when considering introducing new, additional standards.

Recent developments in the Clean Water Act: Section 404 regulatory program

Energy Technology Data Exchange (ETDEWEB)

Kelsch, T. (EPA, Washington, DC (United States))

1992-12-01

Since the late 1970's and the 1980's, the Nation has become increasingly aware of the vital role wetlands play in providing habitat, protecting us from flooding and maintaining surface water quality. This public awakening came at the same time that the Fish and Wildlife Service's National Wetlands Inventory published reports indicating that less than one half of the wetlands that existed when the Europeans came to the US remain. The reports also indicated that the US was continuing to lose approximately 450,000 acres of our wetlands per year. Although recent data updating the status and trends of wetland losses for the 1980's indicate that the rate of loss has decreased, the Fish and Wildlife Service estimates indicate that approximately 290,000 acres of wetlands are still lost each year. Any loss in the natural functions provided by wetlands is not just felt in the environment; we simultaneously sustain, as a loss to our national economy, a decline in the income that could have been derived from the fisheries, recreation and other critical services performed by wetland systems. Clearly wetlands merit protection. However, in the US, where over 75 percent of our remaining wetlands are on private property, the protection of wetlands is often a difficult and sometimes contentious issue -- evoking debate about private property rights, economic development, the public interest in protecting wetland values, and the kind of world we wish to leave for future generations. Section 404 of the Clean Water Act establishes the primary Federal regulatory program providing protection for the Nation's remaining wetlands. The Section 404 permit program is recognized by both its supporters and critics as one of the strongest, yet often most contentious, Federal environmental protection programs. This presentation provides an overview of the Section 404 regulatory requirements and discusses some of the recent developments that have stirred considerable

Study of the impacts of regulations affecting the acceptance of Integrated Community Energy Systems: public utility, energy facility siting and municipal franchising regulatory programs in the United States. Preliminary background report

Energy Technology Data Exchange (ETDEWEB)

Feurer, D.A.; Weaver, C.L.; Gallagher, K.C.; Hejna, D.; Rielley, K.J.

1980-01-01

This report is one of a series of preliminary reports describing the laws and regulatory programs of the United States and each of the 50 states affecting the siting and operation of energy generating facilities likely to be used in Integrated Community Energy Systems (ICES). Public utility regulatory statutes, energy facility siting programs, and municipal franchising authority are examined to identify how they may impact on the ability of an organization, whether or not it be a regulated utility, to construct and operate an ICES. This report describes laws and regulatory programs in the United States. Subsequent reports will (1) describe public utility rate regulatory procedures and practices as they might affect an ICES, (2) analyze each of the aforementioned regulatory programs to identify impediments to the development of ICES, and (3) recommend potential changes in legislation and regulatory practices and procedures to overcome such impediments.

The regulatory framework of accounting and accounting standard-setting bodies in the European Union member states

Directory of Open Access Journals (Sweden)

Ivana Mamić-Sačer

2015-12-01

Full Text Available One of the principal features of accounting in the 21st century is harmonisation and stanardisation. Regulation of the European Parliament and European Council No. 1606/2002 harmonizes financial reporting for certain companies in the EU. However, national accounting principles are of great importance for financial reporting. The main purpose of this research was to investigate the application of generally accepted accounting principles, the regulatory accounting framework and the standard-setting bodies of EU member states. The analysis of these accounting issues was conducted with respect to all 28 EU member states. The results indicate that EU member states regulate their principal accounting issues through separate accounting acts or implement those issues in companies acts. Some EU member states do not have national accounting standards, the national accounting principles being incorporated in companies acts and accounting acts. Nevertheless, national accounting standard-setting bodies are governmental organisations in almost half the member states.

Annual Report 2013. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2010-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across seven parts and eight annexes the activities developed by the organism during 2013. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the environmental monitoring; the occupational surveillance; the training and the public information; improved organizational and budgetary developments. Also, this publication has annexes with the following content: regulatory documents; inspections to medical; presentations of publications from ARN staff; measurement and evaluation of the drinking water of Ezeiza; international expert report on the implementation of international standards on radiation protection in the Ezeiza Atomic Center; Code of Ethics of the Nuclear Regulatory Authority.

24 CFR 200.948 - Building product standards and certification program for carpet cushion.

Science.gov (United States)

2010-04-01

... Minimum Property Standards § 200.948 Building product standards and certification program for carpet... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and certification program for carpet cushion. 200.948 Section 200.948 Housing and Urban Development Regulations...

The U.S. Nuclear Regulatory Commission Thermal-Hydraulic Research Program: Maintaining expertise in a changing environment

International Nuclear Information System (INIS)

Sheron, B.W.; Shotkin, L.M.; Baratta, A.J.

1993-01-01

Throughout the 1970s and early 1980s, the U.S. Nuclear Regulatory Commission's (NRC's) thermal-hydraulic research program enjoyed ample funding, sponsored extensive experimental and analytical development programs, and attracted worldwide expertise. With the completion of the major experimental programs and with the promulgation of the revised emergency core-cooling system rule, both the funding and prominence of thermal-hydraulic research at the NRC have declined in recent years. This has led justifiably to the concern by some that the program may no longer have the minimal elements needed to maintain both expertise and world-class status. The purpose of this article is to describe the NRC's current thermal-hydraulic research program and to show how this program ensures maintenance of a viable, robust research effort and retention of needed expertise and international leadership

Review of standards and guidelines pertinent to DOE's remedial action programs

International Nuclear Information System (INIS)

Soldat, J.K.; Denham, D.H.

1984-10-01

A number of radiological standards, guidelines, and dose criteria have been promulgated that may be relevant to the Department of Energy's (DOE) Remedial Action programs. Some of these will be applied to remedial actions undertaken by DOE to ensure that health and safety aspects will be adequately addressed. Pacific Northwest Laboratory staff are reviewing and evaluating existing and proposed environmental radiological standards and criteria for their applicability. National and international environmental standards and criteria, and studies conducted by other DOE contractors are being evaluated. The aim of the review is to identify gaps in these standards and guidelines and to recommend further development as necessary. This paper provides a summary of the standards and guidelines evaluated for applicability to DOE's Remedial Action programs. 33 references, 5 tables

41 CFR 102-194.5 - What is the Standard and Optional Forms Management Program?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is the Standard and Optional Forms Management Program? 102-194.5 Section 102-194.5 Public Contracts and Property Management... PROGRAMS 194-STANDARD AND OPTIONAL FORMS MANAGEMENT PROGRAM § 102-194.5 What is the Standard and Optional...

75 FR 12804 - Withdrawal of Regulatory Guide 8.6

Science.gov (United States)

2010-03-17

... ``Regulatory Guides'' in the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc-collections... NUCLEAR REGULATORY COMMISSION [NRC-2010-0103] Withdrawal of Regulatory Guide 8.6 AGENCY: Nuclear Regulatory Commission. ACTION: Withdrawal of Regulatory Guide 8.6, ``Standard Test Procedure for Geiger-M...

The Engineering Compliance Program development process and its role in design

International Nuclear Information System (INIS)

1997-12-01

This paper presents an overview of the Engineering Compliance Program (ECP) development process and its role in design. The ECP is a formal program to assess Nuclear Regulatory Commission (NRC) regulatory guidance in terms of precedence, industry experience documents, and codes and standards to determine their applicability to Mined Geologic Disposal System (MGDS) design. These determinations are documented in ECP Guidance Packages for MGDS Structures, Systems and Components (SSCs). This ensures that the license application appropriately reflects the MGDS design and facilitates NRC acceptance and compliance review

12 CFR 567.2 - Minimum regulatory capital requirement.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Minimum regulatory capital requirement. 567.2... Regulatory Capital Requirements § 567.2 Minimum regulatory capital requirement. (a) To meet its regulatory capital requirement a savings association must satisfy each of the following capital standards: (1) Risk...

Medical program in radiation protection from the Argentine Nuclear Regulatory Authority

International Nuclear Information System (INIS)

Perez, M. R.; Gisone, P.; Di Trano, J.L.; Dubner, D.L.; Michelin, S.C.

1998-01-01

This program is carried out by the Radio pathology Laboratory, belonging to the Nuclear Regulatory Authority. The program includes the following aspects: 1) planning and organization of medical response in radiological emergencies. A three-level system of medical assistance has been developed considering: a- determination of each level of care and their potential roles; b- choice of medical facilities for medical assistance; c- preparedness for medical response (equipment s, logistic support, human resources, training). 2) scientific research activities related to radio pathology subjects: a- hematological indicators in radioinduced aplasia; b- biological and biophysical dosimeters; c- radiation effects on the developing brain. 3) edition of practical guidelines for diagnostic and treatment: a- external and internal radioactive contamination; b- acute radiation syndrome; c- radiological burns. 4) medical advising in radioprotection (risk assessment in radiation workers, medical exposures, potential effects of prenatal irradiation). 5) international interactions: activities related with the constitution of a Latin American radio pathology network, linkage with international reference centers. (author) [es

Quality assurance program for nuclear power plants

International Nuclear Information System (INIS)

Gamon, T.H.

1976-02-01

The Topical Report presented establishes and provides the basis for the Brown and Root Quality Assurance Program for Nuclear Power Plants from which the Brown and Root Quality Assurance Manual is prepared and implemented. The Quality Assurance Program is implemented by the Brown and Root Power Division during the design, procurement, and construction phases of nuclear power plants. The Brown and Root Quality Assurance Program conforms to the requirements of Nuclear Regulatory Commission Regulation 10 CFR 50, Appendix B; to approved industry standards such as ANSI N45.2 and ''Daughter Standards''; or to equivalent alternatives as indicated in the appropriate sections of the report

Quality assurance program for nuclear power plants

International Nuclear Information System (INIS)

Gamon, T.H.

1976-06-01

This topical report establishes and provides the basis for the Brown and Root Quality Assurance Program for Nuclear Power Plants from which the Brown and Root Quality Assurance Manual is prepared and implemented. The Quality Assurance Program is implemented by the Brown and Root Power Division during the design, procurement, and construction phases of nuclear power plants. The Brown and Root Quality Assurance Program conforms to the requirements of Nuclear Regulatory Commission Regulation 10 CFR 50, Appendix B; to approved industry standards such as ANSI N45.2 and ''Daughter Standards''; or to equivalent alternatives as indicated in the appropriate sections of this report

A reference standard-based quality assurance program for radiology.

Science.gov (United States)

Liu, Patrick T; Johnson, C Daniel; Miranda, Rafael; Patel, Maitray D; Phillips, Carrie J

2010-01-01

The authors have developed a comprehensive radiology quality assurance (QA) program that evaluates radiology interpretations and procedures by comparing them with reference standards. Performance metrics are calculated and then compared with benchmarks or goals on the basis of published multicenter data and meta-analyses. Additional workload for physicians is kept to a minimum by having trained allied health staff members perform the comparisons of radiology reports with the reference standards. The performance metrics tracked by the QA program include the accuracy of CT colonography for detecting polyps, the false-negative rate for mammographic detection of breast cancer, the accuracy of CT angiography detection of coronary artery stenosis, the accuracy of meniscal tear detection on MRI, the accuracy of carotid artery stenosis detection on MR angiography, the accuracy of parathyroid adenoma detection by parathyroid scintigraphy, the success rate for obtaining cortical tissue on ultrasound-guided core biopsies of pelvic renal transplants, and the technical success rate for peripheral arterial angioplasty procedures. In contrast with peer-review programs, this reference standard-based QA program minimizes the possibilities of reviewer bias and erroneous second reviewer interpretations. The more objective assessment of performance afforded by the QA program will provide data that can easily be used for education and management conferences, research projects, and multicenter evaluations. Additionally, such performance data could be used by radiology departments to demonstrate their value over nonradiology competitors to referring clinicians, hospitals, patients, and third-party payers. Copyright 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Nuclear Regulatory Commission: 1981 annual report

International Nuclear Information System (INIS)

1981-01-01

This seventh annual report of the US Nuclear Regulatory Commission covers major actions, events and planning that occurred during fiscal year 1981, with some coverage of later events, where appropriate. Chapters of the report address the agency's various functions or areas of activity: regulating nuclear power plants; evaluating reactor operating experience; licensing nuclear materials and their transportation; safeguarding nuclear plants and materials; managing nuclear wastes; inspection and enforcement; cooperation with state governments; international activities; research and standards development; hearings; decisions and litigation; and administrative and public communications matters. Each chapter presents a detailed review of program accomplishments during the report period, fiscal year 1981

Evaluation model applied to TRANSPETRO's Marine Terminals Standardization Program

Energy Technology Data Exchange (ETDEWEB)

Almeida, Maria Fatima Ludovico de; Mueller, Gabriela [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ (Brazil). Instituto Tecnologico; Garcia, Luciano Maldonado [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

This paper describes an innovative evaluation model applied to TRANSPETRO's 'Marine Terminals Standardization Program' based on updating approaches of programs evaluation and organizational learning. Since the program was launched in 2004, the need for having an evaluation model able to evaluate its implementation progress, to measure the degree of standards compliance and its potential economic, social and environmental impacts has become evident. Within a vision of safe and environmentally responsible operations of marine terminals, this evaluation model was jointly designed by TRANSPETRO and PUC-Rio to promote continuous improvement and learning in operational practices and in the standardization process itself. TRANSPETRO believes that standardization supports its services and management innovation capability by creating objective and internationally recognized parameters, targets and metrology for its business activities. The conceptual model and application guidelines for this important tool are presented in this paper, as well as the next steps towards its implementation. (author)

Safety Experts Complete IAEA Nuclear Regulatory Review of the United States

International Nuclear Information System (INIS)

2010-01-01

Full text: An international team of senior nuclear safety experts today completed a two-week International Atomic Energy Agency (IAEA) review of the governmental and regulatory framework for nuclear safety in the United States. The team identified good practices within the U.S. system and offered suggestions for ways the U.S. Nuclear Regulatory Commission (NRC) could improve. The IAEA has conveyed the team's main conclusions to the NRC, and a final report will be submitted to the NRC in about two months. At the request of the United States, the IAEA assembled a team of 19 international experts to conduct an Integrated Regulatory Review Service (IRRS) mission. This mission was a peer review based on the IAEA Safety Standards. It was not an inspection, nor an audit. The experts came from 14 different countries: Canada, China, the Czech Republic, Finland, France, Italy, Japan, Mexico, the Republic of Korea, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom. Team leader Jukka Laaksonen of Finland said: ''We found a comprehensive, consistent, and mature regulatory system run by the NRC, which has a strong drive for continuous improvement.' The scope of the mission included the U.S. regulatory framework and the regulation of the nuclear plant operation. The mission was conducted from 18 to 29 October, mainly at NRC headquarters outside of Washington, D.C. To study U.S. regulatory activities, the mission conducted a series of interviews and discussions with NRC staff and other organizations to help assess the effectiveness of the regulatory system. In addition, the team observed regulatory activities at two operating nuclear power reactors and an emergency preparedness exercise. The IAEA's IRRS coordinator Gustavo Caruso said, ''This mission represents a milestone for the IRRS program because the U.S. regulatory system is the largest in the world and many nations look to it. The IRRS is a useful tool that allows host nations to gain guidance from experienced

77 FR 59712 - Energy Conservation Program: Energy Conservation Standards for Dishwashers

Science.gov (United States)

2012-10-01

... amended energy conservation standards, DOE conducted a market survey using all available public... Energy Conservation Program: Energy Conservation Standards for Dishwashers AGENCY: Office of Energy... establish amended energy conservation standards for dishwashers in the Federal Register on May 30, 2012. DOE...

Nuclear energy research initiative, an overview of the cooperative program for the risk-informed assessment of regulatory and design requirements for future nuclear power plants

International Nuclear Information System (INIS)

Ritterbusch, Stanley E.

2000-01-01

EPRI sstudies have shown that nuclear plant capital costs will have to decrease by about 35% to 40% to be competitive with fossil-generated electricity in the Unite States. Also, the ''first concrete'' to fuel load construction schedule will have to be decreased to less than 40 months. Therefore, the U. S. Department of Energy (DOE) initiate the Nuclear Energy Research Initiative (NERI) and ABB CENP proposed a cooperative program with Sandia National Laboratory (SNL) and Duke Engineering and Services (DE and S) to begin an innovative research effort to drastically cut the cost of new nuclear power plant construction for the U. S. de-regulated market place. This program was approved by the DOE through three separate but coordinated ''cooperative agreements.'' They are the ''Risk-Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants'' (Risk-Informed NPP), the ''Smart Nuclear Power Plant Program'' (Smart-NPP), and ''Design, Procure, Construct, Install and Test'' (DPCIT) Program. DOE funded the three cooperative agreements at a level of $2.6 million for the first year of the program. Funding for the complete program is durrently at a level $6.9 million, however, ABB CENP and all partners anticipate that the scope of the NERI program will be increased as a result of the overall importance of NERI to the U. S. Government. The Risk-Informed NPP program, which is aimed at revising costly regularory and design requirements without reducing overall plant safety, has two basic tasks: ''development of Risk-Informed Methods'' and ''strengthening the Reliability Database.'' The overall objective of the first task is to develop a scientific, risk-informed approach for identifying and simplifying deterministic industry standards, regulatory requirements, and safety systems that do not significantly contribute to nuclear power plant reliability and safety. The second basic task is to develop a means for strengthening the reliability database

Environment, safety, and health regulatory implementation plan

International Nuclear Information System (INIS)

1993-01-01

To identify, document, and maintain the Uranium Mill Tailings Remedial Action (UMTRA) Project's environment, safety, and health (ES ampersand H) regulatory requirements, the US Department of Energy (DOE) UMTRA Project Office tasked the Technical Assistance Contractor (TAC) to develop a regulatory operating envelope for the UMTRA Project. The system selected for managing the UMTRA regulatory operating envelope data bass is based on the Integrated Project Control/Regulatory Compliance System (IPC/RCS) developed by WASTREN, Inc. (WASTREN, 1993). The IPC/RCS is a tool used for identifying regulatory and institutional requirements and indexing them to hardware, personnel, and program systems on a project. The IPC/RCS will be customized for the UMTRA Project surface remedial action and groundwater restoration programs. The purpose of this plan is to establish the process for implementing and maintaining the UMTRA Project's regulatory operating envelope, which involves identifying all applicable regulatory and institutional requirements and determining compliance status. The plan describes how the Project will identify ES ampersand H regulatory requirements, analyze applicability to the UMTRA Project, and evaluate UMTRA Project compliance status

77 FR 58022 - Montana Regulatory Program

Science.gov (United States)

2012-09-19

... precludes in situ gasification projects from including carbon capture and sequestration (CCS) under the... Conservation as the regulatory authority for CCS activities within the State. SB498 generally established that..., the Board would regulate any proposed CCS activities appropriately. CCS operations have potential...

Impact of standards and certification on environmental impairment liability insurance programs

International Nuclear Information System (INIS)

Gulledge, W.P.

1993-01-01

Environmental impairment liability (EIL) insurance is available for petroleum storage tank and other environmental exposures. Recent standards and performance criteria for leak detection for underground storage tanks (USTs) and other technical standards for USTs have been both a benefit and an interference to risk-based underwriting of storage tank EIL insurance programs. Insurance underwriters and state financial responsibility program administrators are confronted with confusing information to manage these environmental risks. Standards and certification are also key issues for site assessment programs. Recent activities from ASTM and the Institute for Environmental Auditing (IEA) have addressed the need to increase the professional stature of site assessments and environmental management. Reaction and acceptance of these efforts by the users have been mixed. Ultimately, these efforts will greatly impact insurance coverage for environmental risks

NEGOTIATING STRUCTURAL VULNERABILITY FOLLOWING REGULATORY CHANGES TO A PROVINCIAL METHADONE PROGRAM IN VANCOUVER, CANADA: A QUALITATIVE STUDY

Science.gov (United States)

McNeil, Ryan; Kerr, Thomas; Anderson, Solanna; Maher, Lisa; Keewatin, Chereece; Milloy, MJ; Wood, Evan; Small, Will

2015-01-01

While regulatory frameworks governing methadone maintenance therapy (MMT) require highly regimented treatment programs that shape treatment outcomes, little research has examined the effects of regulatory changes to these programs on those receiving treatment, and located their experiences within the wider context of socialstructural inequities. In British Columbia (BC), Canada, provincial regulations governing MMT have recently been modified, including: replacing the existing methadone formulation with Methadose® (pre-mixed and 10 times more concentrated); prohibiting pharmacy delivery of methadone; and, prohibiting pharmacies incentives for methadone dispensation. We undertook this study to examine the impacts of these changes on a structurally vulnerable population enrolled in MMT in Vancouver, BC. Qualitative interviews were conducted with 34 people enrolled in MMT and recruited from two ongoing observational prospective cohort studies comprised of drug-using individuals in the six-month period in 2014 following these regulatory changes. Interview transcripts were analyzed thematically, and by drawing on the concept of ‘structural vulnerability’. Findings underscore how these regulatory changes disrupted treatment engagement, producing considerable health and social harms. The introduction of Methadose® precipitated increased withdrawal symptoms. The discontinuation of pharmacy delivery services led to interruptions in MMT and codispensed HIV medications due to constraints stemming from their structural vulnerability (e.g., poverty, homelessness). Meanwhile, the loss of pharmacy incentives limited access to material supports utilized by participants to overcome barriers to MMT, while diminishing their capacity to assert some degree of agency in negotiating dispensation arrangements with pharmacies. Collectively, these changes functioned to compromise MMT engagement and increased structural vulnerability to harm, including re-initiation of injection drug

Technical support to the Nuclear Regulatory Commission for the boiling water reactor blowdown heat transfer program

International Nuclear Information System (INIS)

Rice, R.E.

1976-09-01

Results are presented of studies conducted by Aerojet Nuclear Company (ANC) in FY 1975 to support the Nuclear Regulatory Commission (NRC) on the boiling water reactor blowdown heat transfer (BWR-BDHT) program. The support provided by ANC is that of an independent assessor of the program to ensure that the data obtained are adequate for verification of analytical models used for predicting reactor response to a postulated loss-of-coolant accident. The support included reviews of program plans, objectives, measurements, and actual data. Additional activity included analysis of experimental system performance and evaluation of the RELAP4 computer code as applied to the experiments

Radio-ecological characterization and radiological assessment in support of regulatory supervision of legacy sites in northwest Russia.

Science.gov (United States)

Sneve, M K; Kiselev, M; Shandala, N K

2014-05-01

The Norwegian Radiation Protection Authority has been implementing a regulatory cooperation program in the Russian Federation for over 10 years, as part of the Norwegian government's Plan of Action for enhancing nuclear and radiation safety in northwest Russia. The overall long-term objective has been the enhancement of safety culture and includes a special focus on regulatory supervision of nuclear legacy sites. The initial project outputs included appropriate regulatory threat assessments, to determine the hazardous situations and activities which are most in need of enhanced regulatory supervision. In turn, this has led to the development of new and updated norms and standards, and related regulatory procedures, necessary to address the often abnormal conditions at legacy sites. This paper presents the experience gained within the above program with regard to radio-ecological characterization of Sites of Temporary Storage for spent nuclear fuel and radioactive waste at Andreeva Bay and Gremikha in the Kola Peninsula in northwest Russia. Such characterization is necessary to support assessments of the current radiological situation and to support prospective assessments of its evolution. Both types of assessments contribute to regulatory supervision of the sites. Accordingly, they include assessments to support development of regulatory standards and guidance concerning: control of radiation exposures to workers during remediation operations; emergency preparedness and response; planned radionuclide releases to the environment; development of site restoration plans, and waste treatment and disposal. Examples of characterization work are presented which relate to terrestrial and marine environments at Andreeva Bay. The use of this data in assessments is illustrated by means of the visualization and assessment tool (DATAMAP) developed as part of the regulatory cooperation program, specifically to help control radiation exposure in operations and to support

40 CFR 131.8 - Requirements for Indian Tribes to administer a water quality standards program.

Science.gov (United States)

2010-07-01

... administer a water quality standards program. 131.8 Section 131.8 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.8 Requirements for Indian Tribes to administer a water quality standards program. (a) The Regional Administrator, as...

75 FR 18850 - National Protection and Programs Directorate; Chemical Facility Anti-Terrorism Standards...

Science.gov (United States)

2010-04-13

... Directorate; Chemical Facility Anti-Terrorism Standards Personnel Surety Program AGENCY: National Protection...-terrorism Vulnerability Information (CVI), Sensitive Security Information (SSI), or Protected Critical... . SUPPLEMENTARY INFORMATION: Program Description The Chemical Facility Anti-Terrorism Standards (CFATS), 6 CFR...

40 CFR 73.86 - State regulatory autonomy.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false State regulatory autonomy. 73.86 Section 73.86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... regulatory autonomy. Nothing in this subpart shall preclude a State or State regulatory authority from...

78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

Science.gov (United States)

2013-12-06

... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

Creating a Comprehensive, Efficient, and Sustainable Nuclear Regulatory Structure: A Process Report from the U.S. Department of Energy's Material Protection, Control and Accounting Program

International Nuclear Information System (INIS)

Wright, Troy L.; O'Brien, Patricia E.; Hazel, Michael J.; Tuttle, John D.; Cunningham, Mitchel E.; Schlegel, Steven C.

2010-01-01

With the congressionally mandated January 1, 2013 deadline for the U.S. Department of Energy's (DOE) Nuclear Material Protection, Control and Accounting (MPC and A) program to complete its transition of MPC and A responsibility to the Russian Federation, National Nuclear Security Administration (NNSA) management directed its MPC and A program managers and team leaders to demonstrate that work in ongoing programs would lead to successful and timely achievement of these milestones. In the spirit of planning for successful project completion, the NNSA review of the Russian regulatory development process confirmed the critical importance of an effective regulatory system to a sustainable nuclear protection regime and called for an analysis of the existing Russian regulatory structure and the identification of a plan to ensure a complete MPC and A regulatory foundation. This paper describes the systematic process used by DOE's MPC and A Regulatory Development Project (RDP) to develop an effective and sustainable MPC and A regulatory structure in the Russian Federation. This nuclear regulatory system will address all non-military Category I and II nuclear materials at State Corporation for Atomic Energy 'Rosatom,' the Federal Service for Ecological, Technological, and Nuclear Oversight (Rostechnadzor), the Federal Agency for Marine and River Transport (FAMRT, within the Ministry of Transportation), and the Ministry of Industry and Trade (Minpromtorg). The approach to ensuring a complete and comprehensive nuclear regulatory structure includes five sequential steps. The approach was adopted from DOE's project management guidelines and was adapted to the regulatory development task by the RDP. The five steps in the Regulatory Development Process are: (1) Define MPC and A Structural Elements; (2) Analyze the existing regulatory documents using the identified Structural Elements; (3) Validate the analysis with Russian colleagues and define the list of documents to be

75 FR 37733 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

Science.gov (United States)

2010-06-30

... Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... direct final rule to amend the Renewable Fuel Standard program requirements on May 10, 2010. Because EPA... Fuel Standard program requirements, published on May 10, 2010. We stated in that direct final rule that...

75 FR 28073 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-05-19

... ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc... NUCLEAR REGULATORY COMMISSION [NRC-2010-0181] Draft Regulatory Guide: Issuance, Availability... Guide, DG-3039, ``Standard Format and Content for Emergency Plans for Fuel Cycle and Materials...

75 FR 45166 - Draft Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-08-02

... ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc... NUCLEAR REGULATORY COMMISSION [NRC-2010-0265] Draft Regulatory Guide: Issuance, Availability... Guide, DG-3030, ``Nuclear Criticality Safety Standards for Fuels and Material Facilities.'' [[Page 45167...

Scinfi, a program to calculate the standardization curve in liquid scintillation counting

International Nuclear Information System (INIS)

Grau Carles, A.; Grau Malonda, A.

1984-01-01

A code, Scinfi, was developed, written in Basic, to compute the efficiency-quench standardization curve for any radionuclide. The program requires the standardization curve for 3 H and the polynomial relations between counting efficiency and figure of merit for both 3 H and the problem (e.g. 14 C). The program is applied to the computation of the efficiency-quench standardization curve for 14 C. Five different liquid scintillation spectrometers and two scintillator solutions have been checked. The computation results are compared with the experimental values obtained with a set of 14 C standardized samples. (author)

SCINFI, a program to calculate the standardization curve in liquid scintillation counting

International Nuclear Information System (INIS)

Grau Carles, A.; Grau Malonda, A.

1984-01-01

A code, SCINFI, was developed, written in BASIC, to compute the efficiency- quench standardization curve for any radionuclide. The program requires the standardization curve for 3H and the polynomial relations between counting efficiency and figure of merit for both 3H and the problem (e.g. 14 C ). The program is applied to the computation of the efficiency-quench standardization curve for 14 c . Five different liquid scintillation spectrometers and two scintillator solutions have bean checked. The computation results are compared with the experimental values obtained with a set of 14 c standardized samples. (Author)

Distinct gene regulatory programs define the inhibitory effects of liver X receptors and PPARG on cancer cell proliferation.

Science.gov (United States)

Savic, Daniel; Ramaker, Ryne C; Roberts, Brian S; Dean, Emma C; Burwell, Todd C; Meadows, Sarah K; Cooper, Sara J; Garabedian, Michael J; Gertz, Jason; Myers, Richard M

2016-07-11

The liver X receptors (LXRs, NR1H2 and NR1H3) and peroxisome proliferator-activated receptor gamma (PPARG, NR1C3) nuclear receptor transcription factors (TFs) are master regulators of energy homeostasis. Intriguingly, recent studies suggest that these metabolic regulators also impact tumor cell proliferation. However, a comprehensive temporal molecular characterization of the LXR and PPARG gene regulatory responses in tumor cells is still lacking. To better define the underlying molecular processes governing the genetic control of cellular growth in response to extracellular metabolic signals, we performed a comprehensive, genome-wide characterization of the temporal regulatory cascades mediated by LXR and PPARG signaling in HT29 colorectal cancer cells. For this analysis, we applied a multi-tiered approach that incorporated cellular phenotypic assays, gene expression profiles, chromatin state dynamics, and nuclear receptor binding patterns. Our results illustrate that the activation of both nuclear receptors inhibited cell proliferation and further decreased glutathione levels, consistent with increased cellular oxidative stress. Despite a common metabolic reprogramming, the gene regulatory network programs initiated by these nuclear receptors were widely distinct. PPARG generated a rapid and short-term response while maintaining a gene activator role. By contrast, LXR signaling was prolonged, with initial, predominantly activating functions that transitioned to repressive gene regulatory activities at late time points. Through the use of a multi-tiered strategy that integrated various genomic datasets, our data illustrate that distinct gene regulatory programs elicit common phenotypic effects, highlighting the complexity of the genome. These results further provide a detailed molecular map of metabolic reprogramming in cancer cells through LXR and PPARG activation. As ligand-inducible TFs, these nuclear receptors can potentially serve as attractive therapeutic

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs

Energy Technology Data Exchange (ETDEWEB)

Zhou, Nan; Zheng, Nina; Fridley, David

2012-02-28

Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energy Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process

1997 DOE technical standards program workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. The workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.

Considering public confidence in developing regulatory programs

International Nuclear Information System (INIS)

Collins, S.J.

2001-01-01

In the area of public trust and in any investment, planning and strategy are important. While it is accepted in the United States that an essential part of our mission is to leverage our resources to improving Public Confidence this performance goal must be planned for, managed and measured. Similar to our premier performance goal of Maintaining Safety, a strategy must be developed and integrated with our external stake holders but with internal regulatory staff as well. In order to do that, business is to be conducted in an open environment, the basis for regulatory decisions has to be available through public documents and public meetings, communication must be done in clear and consistent terms. (N.C.)

Review and evaluation of the Nuclear Regulatory Commission safety research program for Fiscal Year 1983. Report to the Congress

International Nuclear Information System (INIS)

1982-02-01

Public Law 95-209 includes a requirement that the Advisory Committee on Reactor Safeguards submit an annual report to Congress on the safety research program of the Nuclear Regulatory Commission. This report presents the results of the ACRS review and evaluation of the NRC safety research program for Fiscal Year 1983. The report contains a number of comments and recommendations

Roadmap to sustainable textiles and clothing regulatory aspects and sustainability standards of textiles and the clothing supply chain

CERN Document Server

2015-01-01

This book covers the elements involved in achieving sustainability in textiles and clothing sector. The chapters covered in three volumes of this series title cover all the distinctive areas earmarked for achieving sustainable development in textiles and clothing industry. This third volume highlights the areas pertaining to the regulatory aspects and sustainability standards applicable to textiles and clothing supply chain. There are various standards earmarked for measuring the environmental impacts and sustainability of textile products. There are also plenty of certification schemes available along with the index systems applicable to textile sector. Brands and manufactures are also venturing into new developments to achieve sustainable development in textile sector. This third volume addresses all these important aspects.

Review of regulatory requirements for digital I and C systems

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon; Lee, Cheol Kwon; Lee, Jang Soo [and others

2001-11-01

This work analyzed and summarized systematically various regulatory requirements that are necessary to develop digital nuclear instrumentation and control (I and C) systems, especially safety systems. The requirements are categorized into system, hardware, software, and quality assurance aspects. This report provides the explanations of terms and abbreviations to help readers understand. Furthermore, appendices of this report summarize the code and standards corresponding to each principal regulatory requirement. The hierarchical structure of regulatory requirements has Nuclear Energy Laws, Enforcement Regulations of Nuclear Energy Laws, and Notifications of Ministry of Science and Technology as utmost level requirements [In case of the US, 10 CFR 50 Appendix A, 10 CFR 50 Appendix B, 10 CFR 50.55a(h), 10 CFR 50.49, etc.]. The requirements include the Draft Regulatory Guidelines for Digital I and C Systems [In case of the US, Standard Review Plan (NUREG-0800), Regulatory Guide, Branch Technical Position (BTP)], KEPIC as standards [In case of the US, IEEE Standards, IEC Standards, ISA, Military Standard, etc.], and various reports issued by Korea Institute of Nuclear Safety [In case of the US, NUREG reports, EPRI reports, etc.]. This report can be referred for the development of safety grade control equipment, plant protection system, and engineered safety feature actuation system.

Review of regulatory requirements for digital I and C systems

International Nuclear Information System (INIS)

Kwon, Kee Choon; Lee, Cheol Kwon; Lee, Jang Soo

2001-11-01

This work analyzed and summarized systematically various regulatory requirements that are necessary to develop digital nuclear instrumentation and control (I and C) systems, especially safety systems. The requirements are categorized into system, hardware, software, and quality assurance aspects. This report provides the explanations of terms and abbreviations to help readers understand. Furthermore, appendices of this report summarize the code and standards corresponding to each principal regulatory requirement. The hierarchical structure of regulatory requirements has Nuclear Energy Laws, Enforcement Regulations of Nuclear Energy Laws, and Notifications of Ministry of Science and Technology as utmost level requirements [In case of the US, 10 CFR 50 Appendix A, 10 CFR 50 Appendix B, 10 CFR 50.55a(h), 10 CFR 50.49, etc.]. The requirements include the Draft Regulatory Guidelines for Digital I and C Systems [In case of the US, Standard Review Plan (NUREG-0800), Regulatory Guide, Branch Technical Position (BTP)], KEPIC as standards [In case of the US, IEEE Standards, IEC Standards, ISA, Military Standard, etc.], and various reports issued by Korea Institute of Nuclear Safety [In case of the US, NUREG reports, EPRI reports, etc.]. This report can be referred for the development of safety grade control equipment, plant protection system, and engineered safety feature actuation system

U.S. Nuclear Regulatory Commission human factors program plan

International Nuclear Information System (INIS)

1986-04-01

The purpose of the U.S. Nuclear Regulatory Commission (NRC) Human Factors Program Plan is to ensure that proper consideration is given to human factors in the design and operation of nuclear facilities. This revised plan addresses human factors issues related to the operation of nuclear power plants (NPPs). The three issues of concern are (1) the activities planned to provide the technical bases to resolve the remaining tasks related to human factors as described in NUREG-0660, The NRC Action Plan Developed as a Result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements; (2) the need to address the additional human factors efforts that were identified during implementation of the Action Plan; and (3) the actual fulfillment of those developmental activities specified in Revision 1 of this plan. The plan represents a systematic approach for addressing high priority human factors concerns important to NPP safety in FY 1986 through 1987

Practical standard for nuclear power plant life management programs: 2007

International Nuclear Information System (INIS)

2006-03-01

The standard specifies the method of implementing nuclear power plant life management programs. The plant life management programs evaluate the integrity of the plant structures, systems and components, assessing if appropriate measures are taken against existing aging phenomena, if there are possibilities of occurrence and development of aging phenomena and if a sufficient level of margin is maintained to assure the integrity throughout the future operating period. The programs also assess the validity of the current maintenance activities, such as trend monitoring, walkdowns, periodic tests and inspections, repair and replacement work for the purpose of preventive maintenance, and utilization of lessons learned from past trouble experience, in order to newly identify maintenance measures. The technical evaluation on aging phenomena is conducted to establish the 10 year maintenance program for nuclear power plants until the plant reaches 30 years of service. The standard was established and issued by the Atomic Energy Society of Japan (AESJ) through the discussion of experts in the associated fields. (T. Tanaka)

NWTS program criteria for mined geologic disposal of nuclear waste: program objectives, functional requirements, and system performance criteria

International Nuclear Information System (INIS)

1982-03-01

The NWTS-33 series, of which this document is a part, provides guidance for the National Waste Terminal Storage (NWTS) program in the development and implementation of licensed mined geologic disposal systems for solidified high-level and TRU wastes. Program objectives, functional requirements, and system performance criteria are found in this document. At the present time final criteria have not been issued by the Nuclear Regulatory Commission (NRC) and Environmental Protection Agency (EPA). The criteria in these documents have been developed on the basis of DOE's judgment of what is required to protect the health and safety of the public and the quality of the environment. It is expected that these criteria will be consistent with regulatory standards. The criteria will be re-evaluated on a periodic basis to ensure that they remain consistent with national waste management policy and regulatory requirements. A re-evaluation will be made when final criteria are promulgated by the NRC and EPA. A background section that briefly describes the mined geologic disposal system and explains the hierarchy and application of the NWTS criteria is included in Section 2.0. Secton 3.0 presents the program objectives, Section 4.0 functional requirements, Secton 5.0 the system performance criteria, and Section 6.0 quality assurance and standards. A draft of this document was issued for public comment in April 1981. Appendix A contains the DOE responses to the comments received. Appendix B is a glossary

Radioactivity standards distribution program, 1978--1979. Interim report, 1978--1979

International Nuclear Information System (INIS)

Ziegler, L.H.

1978-06-01

A program for the distribution of calibrated radioactive samples, as one function of EPA's quality assurance program for environmental radiation measurements, is described. Included is a discussion of the objectives of the distribution program and a description of the preparation, availability, and distribution of calibrated radioactive samples. Instructions and application forms are included for laboratories desiring to participate in the program. This document is not a research report. It is designed for use by personnel of laboratories participating or desiring to participate in the Radioactivity Standards Distribution Program, which is a part of the U.S. Environmental Protection Agency's quality assurance program

Evaluation of four building energy analysis computer programs against ASHRAE standard 140-2007

CSIR Research Space (South Africa)

Szewczuk, S

2014-08-01

Full Text Available ) standard or code of practice. Agrément requested the CSIR to evaluate a range of building energy simulation computer programs. The standard against which these computer programs were to be evaluated was developed by the American Society of Heating...

Review of standards and guidelines pertinent to DOE's Remedial Action programs

International Nuclear Information System (INIS)

Soldat, J.K.; Denham, D.H.

1985-01-01

A number of radiological standards, guidelines, and dose criteria have been promulgated that may be relevant to the Department of Energy's (DOE) Remedial Action programs. Some of these are being applied to remedial actions undertaken by DOE to ensure that health and safety aspects are adequately addressed. Pacific Northwest Laboratory staff reviewed existing and proposed environmental radiological standards and criteria for their applicability to DOE's Remedial Action Programs. National and international environmental standards and criteria, and studies conducted by other DOE contractors were reviewed. The review indicated that there is a lack of uniformity between the dose guidelines developed by the various agencies. A uniform dose standard is needed for DandD, at least as an upper limit with application of the ALARA philosophy. 33 references, 5 tables

Food Reformulation, Responsive Regulation, and “Regulatory Scaffolding”: Strengthening Performance of Salt Reduction Programs in Australia and the United Kingdom

Directory of Open Access Journals (Sweden)

Roger Magnusson

2015-06-01

Full Text Available Strategies to reduce excess salt consumption play an important role in preventing cardiovascular disease, which is the largest contributor to global mortality from non-communicable diseases. In many countries, voluntary food reformulation programs seek to reduce salt levels across selected product categories, guided by aspirational targets to be achieved progressively over time. This paper evaluates the industry-led salt reduction programs that operate in the United Kingdom and Australia. Drawing on theoretical concepts from the field of regulatory studies, we propose a step-wise or “responsive” approach that introduces regulatory “scaffolds” to progressively increase levels of government oversight and control in response to industry inaction or under-performance. Our model makes full use of the food industry’s willingness to reduce salt levels in products to meet reformulation targets, but recognizes that governments remain accountable for addressing major diet-related health risks. Creative regulatory strategies can assist governments to fulfill their public health obligations, including in circumstances where there are political barriers to direct, statutory regulation of the food industry.

Survey of regulatory agency review of generating unit performance

International Nuclear Information System (INIS)

Roach, E.M. Jr.; Tarletz, D.B.

1985-01-01

Regulatory agencies across the country are being called upon increasingly to monitor the management of electric utilities. Such activity, which once was relatively rare, is now common. Most frequently this oversight centers around the operating performance of generating units, both nuclear and fossil. There are, perhaps, several reasons for this increased interest in the efficient operation of generating units: increased fuel costs and fuel cost differentials, increased lead times and costs for construction of new generating units, and increased dependence on existing units because of construction programs being revised to meet decreased load growth. The monitoring of generating units has taken the form of after the fact evaluation of performance on a case-by-case basis and the implementation of productivity incentive programs. Performance standards are used in these contexts both to measure the adequacy of unit performance and to implement incentives in the form of rewards or penalties. The standard used may be a subjective test of prudent performance or some numerical index of plant performance, e.g., equivalent availability, capacity factor or heat rate. Some of the activity by regulators is reviewed in applying subjective and numerical standards and the considerations involved in applying such standards are discussed

Radio-ecological characterization and radiological assessment in support of regulatory supervision of legacy sites in northwest Russia

International Nuclear Information System (INIS)

Sneve, M.K.; Kiselev, M.; Shandala, N.K.

2014-01-01

The Norwegian Radiation Protection Authority has been implementing a regulatory cooperation program in the Russian Federation for over 10 years, as part of the Norwegian government's Plan of Action for enhancing nuclear and radiation safety in northwest Russia. The overall long-term objective has been the enhancement of safety culture and includes a special focus on regulatory supervision of nuclear legacy sites. The initial project outputs included appropriate regulatory threat assessments, to determine the hazardous situations and activities which are most in need of enhanced regulatory supervision. In turn, this has led to the development of new and updated norms and standards, and related regulatory procedures, necessary to address the often abnormal conditions at legacy sites. This paper presents the experience gained within the above program with regard to radio-ecological characterization of Sites of Temporary Storage for spent nuclear fuel and radioactive waste at Andreeva Bay and Gremikha in the Kola Peninsula in northwest Russia. Such characterization is necessary to support assessments of the current radiological situation and to support prospective assessments of its evolution. Both types of assessments contribute to regulatory supervision of the sites. Accordingly, they include assessments to support development of regulatory standards and guidance concerning: control of radiation exposures to workers during remediation operations; emergency preparedness and response; planned radionuclide releases to the environment; development of site restoration plans, and waste treatment and disposal. Examples of characterization work are presented which relate to terrestrial and marine environments at Andreeva Bay. The use of this data in assessments is illustrated by means of the visualization and assessment tool (DATAMAP) developed as part of the regulatory cooperation program, specifically to help control radiation exposure in operations and to support

BACHELOR OF INFORMATICS COMPETENCE IN PROGRAMMING

Directory of Open Access Journals (Sweden)

Andrii M. Striuk

2015-04-01

Full Text Available Based on the analysis of approaches to the definition of professional competencies of IT students the competence in programming of bachelor of informatics is proposed. Due to the standard of training in 040302 “Informatics” and Computing Curricula 2001 it was defined the content and structure of the competence in programming of bachelor of informatics. The system of content modules providing its formation was designed. The contribution of regulatory competencies of bachelor of informatics in the formation of competence in programming is defined. The directions of formation of competence in programming in the cloudy-oriented learning environment are proposed.

The status of ANSI N13.11 - The dosimeter performance test standard

International Nuclear Information System (INIS)

Sims, C.S.

1991-01-01

The standard designated ANSI N13.11 was issued in 1983 and is the basis for the dosimeter performance test associated with the National Voluntary Laboratory Accreditation Program (NVLAP). The standard is important because the Nuclear Regulatory Commission requires that all licensees use personnel dosimeters processed by NVLAP-accredited processors. The standard has undergone review and modifications have been recommended. Historical information concerning the development and utilization of the present standard, ANSI N13.11-1983, is presented. Details associated with the review of the standard (e.g., policy, group selection) are then given. Finally, the modifications recommended by the review group are discussed

DOE standard: Filter test facility quality program plan

International Nuclear Information System (INIS)

1999-02-01

This standard was developed primarily for application in US Department of Energy programs. It contains specific direction for HEPA filter testing performed at a DOE-accepted HEPA Filter Test Facility (FTF). Beneficial comments (recommendations, additions, deletions) and any pertinent data that may improve this document should be sent to the Office of Nuclear Safety Policy and Standards (EH-31), US Department of Energy, Washington, DC 20585, by letter or by using the self-addressed Document Improvement Proposal form (DOE F 1300.3) appearing at the end of this document

Data Availability in Appliance Standards and Labeling Program Development and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Vine, Edward [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-05-01

In this report, we describe the necessary data inputs for both standards development and program evaluation and perform an initial assessment of the availability and uncertainty of those data inputs in China. For standards development, we find that China and its standards and labeling program administrators currently has access to the basic market and technical data needed for conducting market and technology assessment and technological and economic analyses. Some data, such as shipments data, is readily available from the China Energy Label product registration database while the availability of other data, including average unit energy consumption, prices and design options, needs improvement. Unlike some other countries such as the United States, most of the necessary data for conducting standards development analyses are not publicly available or compiled in a consolidated data source. In addition, improved data on design and efficiency options as well as cost data (e.g., manufacturing costs, mark-ups, production and product use-phase costs) – key inputs to several technoeconomic analyses – are particularly in need given China’s unconsolidated manufacturing industry. For program evaluation, we find that while China can conduct simple savings evaluations on its incentive programs with the data it currently has available from the Ministry of Finance – the program administrator, the savings estimates produced by such an evaluation will carry high uncertainty. As such, China could benefit from an increase in surveying and metering in the next one to three years to decrease the uncertainty surrounding key data points such as unit energy savings and free ridership.

Meeting regulatory standards with BeO ceramic TLD

International Nuclear Information System (INIS)

Gammage, R.B.; Christian, D.J.

1978-01-01

Measurements of exposures below 1 mR are possible with BeO ceramic TLD by signal recording that discriminates against an interfering pyroelectric incandescence. Performance under environmental monitoring conditions is considered in light of current regulatory criteria. Factors such as reproducibility and batch uniformity are satisfactory. An anomalous energy dependence causes an over-response that will probably require use of an energy compensation shield

76 FR 72220 - Incorporation of Risk Management Concepts in Regulatory Programs

Science.gov (United States)

2011-11-22

... actions? 4. What are the key characteristics for a holistic risk management regulatory structure for... accomplishing the goal of a holistic risk management regulatory structure? How could these challenges be... NUCLEAR REGULATORY COMMISSION [NRC-2011-0269] Incorporation of Risk Management Concepts in...

Global warming mitigation strategies and programs for power plant developers

International Nuclear Information System (INIS)

Holmes, N.R.

1992-01-01

Power plant developers are increasingly being surprised by regulatory agencies requiring them to mitigate the carbon dioxide(CO 2 ) emissions from their proposed power plants, as part of the plant's operating permit conditions. Since carbon dioxide is not a criteria pollutant with a National Ambient Air Quality Standard, power plant developers are often troubled by this additional regulatory requirement. This presentation will describe the contribution that CO 2 makes to global warming, the role of trees and forests as carbon sequesters or sinks, some non-forestry related and forestry related mitigation programs, including the advantages, disadvantages, and some cost estimates for the forestry related CO 2 mitigation programs. As public concern about global warming continues to escalate, it is almost certain that regulatory agencies will increase their focus on CO 2 mitigation

Investigating the Availability of Quality Assurance Standards of Academic Programs in the Music Teacher Preparation Program- University of Jordan, from the Students’ Perspective

Directory of Open Access Journals (Sweden)

Nedal M. Nsairat

2017-08-01

Full Text Available This study aimed to find out how far quality assurance standards were applied in the music teacher preparation program at the University of Jordan, from the viewpoint of the students enrolled in the same program. The population of this study consisted of all the students (53 enrolled in the program , and majoring in music education and music performance. The study followed a descriptive analytical approach to collect the data. The study results revealed the extent of relevance of the BA program of preparing music teachers in the University of Jordan, which came as a result of applying each quality assurance standard in the program except the standard of facilities and equipment. In light of the findings, the study recommended that all those in charge of the educational process should pay more heed to certification programs of music teacher education. This should be done by designing and implementing programs to support this type of program, so as to be in conformity with quality assurance standards of music teacher education. Keywords: Preparation , Music teacher education , Standard , Quality assurance.

Overview of EPA's environmental standards for the land disposal of LLW and NARM waste - 1988

International Nuclear Information System (INIS)

Gruhlke, J.M.; Galpin, F.L.; Holcomb, W.F.

1988-01-01

The Environmental Protection Agency program to develop proposed generally applicable environmental standards for land disposal of low-level radioactive waste (LLW) and certain naturally occurring and accelerator-produced radioactive wastes has been completed. The elements of the proposed standards include the following: (a) exposure limits for predisposal management and storage operations, (b) criteria for other regulatory agencies to follow in specifying wastes that are below regulatory concern; (c) postdisposal exposure limits, (d) groundwater protection requirements, and (e) qualitative implementation requirements. In addition to covering those radioactive wastes subject to the Atomic Energy Act, the Agency also intends to propose a standard to require the disposal of high concentration, naturally occurring and accelerator-produced radioactive materials wastes exceeding 2 nCi/g, excluding a few consumer items, in regulated LLW disposal facilities

Proceedings of the tenth annual DOE low-level waste management conference: Session 1: Institutional and regulatory issues

International Nuclear Information System (INIS)

1988-12-01

This document contains eleven papers on various aspects of low-level radioactive waste regulation. Topics include: EPA environmental standards; international exemption principles; the concept of below regulatory concern; envirocare activities in Utah; mixed waste; FUSRAP and the Superfund; and a review of various incentive programs. Individual papers are processed separately for the data base

RECOMMENDED FOUNDATION FILL MATERIALS CONSTRUCTION STANDARD OF THE FLORIDA RADON RESEARCH PROGRAM

Science.gov (United States)

The report summarizes the technical basis for a recommended foundation fill materials standard for new construction houses in Florida. he radon-control construction standard was developed by the Florida Radon Research Program (FRRP). ill material standards are formulated for: (1)...

Data Standards for the Genomes to Life Program

Energy Technology Data Exchange (ETDEWEB)

Arkin, Adam; Ambrosiano, John; Babnigg, Gyorgy; Frank, Ed; Geist,Al; Giometti, Carol; Jacobsen, Janet; Samatova, Nagiza; Slater, Nancy; Taylor, Ron

2004-01-31

Existing GTL Projects already have produced volumes of dataand, over the course of the next five years, will produce an estimatedhundreds, or possibly thousands, of terabytes of data from hundreds ofexperiments conducted at dozens of laboratories in National Labs anduniversities across the nation. These data will be the basis forpublications by individual researchers, research groups, andmulti-institutional collaborations, and the basis for future DOEdecisions on funding further research in bioremediation. The short-termand long-term value of the data to project participants, to the DOE, andto the nation depends, however, on being able to access the data and onhow, or whether, the data are archived. The ability to access data is thestarting point for data analysis and interpretation, data integration,data mining, and development of data-driven models. Limited orinefficient data access means that less data are analyzed in acost-effective and timely manner. Data production in the GTL Program willlikely outstrip, or may have already outstripped, the ability to analyzethe data. Being able to access data depends on two key factors: datastandards and implementation of the data standards. For the purpose ofthis proposal, a data standard is defined as a standard, documented wayin which data and information about the data are describe. The attributesof the experiment in which the data were collected need to be known andthe measurements corresponding to the data collected need to bedescribed. In general terms, a data standard could be a form (electronicor paper) that is completed by a researcher or a document that prescribeshow a protocol or experiment should be described in writing.Datastandards are critical to data access because they provide a frameworkfor organizing and managing data. Researchers spend significant amountsof time managing data and information about experiments using labnotebooks, computer files, Excel spreadsheets, etc. In addition, dataoutput format

Trends and the determination of effective doses for standard X-ray procedures

International Nuclear Information System (INIS)

Johnson, H.M.; Neduzak, C.; Gallet, J.; Sandeman, J.

2001-01-01

Trends in the entrance skin exposures (air kerma) for standard x-ray imaging procedures are reported for the Province of Manitoba, Canada. Average annual data per procedure using standard phantoms and standard ion chambers have been recorded since 1981. For example, chest air kerma (backscatter included) has decreased from 0.14 to 0.09 mGy. Confounding factors may negate the gains unless facility quality control programs are maintained. The data were obtained for a quality assurance and regulatory compliance program. Quoting such data for risk evaluation purposes lacks rigor hence a compartment model for organ apportioning, using organ absorbed doses and weighting factors, has been applied to determine effective dose per procedure. The effective doses for the standard procedures are presented, including the value of 0.027 mSv (1999) calculated for the effective dose in PA chest imaging. (author)

Regulatory Support Program in Central Asia. Progress and new bilateral project with the State Inspectorate on Safety in Industry and Mining of Republic of Uzbekistan

International Nuclear Information System (INIS)

2011-01-01

A meeting of the regional regulatory support program in Central Asia (CA) was held in May 25 to 26, 2011 in Tashkent, Uzbekistan, where parties discussed ongoing bilateral cooperation between the NRPA and the regulatory bodies of Kazakhstan, Kyrgyzstan and Tajikistan. (Author)

Regulatory Support Program in Central Asia. Progress and new bilateral project with the State Inspectorate on Safety in Industry and Mining of Republic of Uzbekistan

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

A meeting of the regional regulatory support program in Central Asia (CA) was held in May 25 to 26, 2011 in Tashkent, Uzbekistan, where parties discussed ongoing bilateral cooperation between the NRPA and the regulatory bodies of Kazakhstan, Kyrgyzstan and Tajikistan. (Author)

Through the regulatory hoop

International Nuclear Information System (INIS)

Kirner, N.P.

1985-01-01

There are many regulatory hoops through which waste generators, brokers, and disposal site operators must jump to dispose of waste safely. As the proposed exclusionary date of January 1, 1986, approaches, these regulatory hoops have the distinct possibility of multiplying or at least changing shape. The state of Washington, in its role as an Agreement State with the US Nuclear Regulatory Commission, licenses and inspects the commercial operator of the Northwest Compact's low-level radioactive waste disposal site on the Hanford Reservation. Washington has received as much as 53%, or 1.4 million cubic feet per year, of the nation's total volume of waste disposed. To control such a large volume of waste, a regulatory program involving six agencies has developed over the years in Washington

76 FR 62312 - Multi-Agency Informational Meeting Concerning Compliance With the Federal Select Agent Program...

Science.gov (United States)

2011-10-07

... interested individuals to obtain specific regulatory guidance and information on standards concerning biosafety and biosecurity issues related to the Federal Select Agent Program. CDC, APHIS, and CJIS...

Cartographic standards to improve maps produced by the Forest Inventory and Analysis program

Science.gov (United States)

Charles H. (Hobie) Perry; Mark D. Nelson

2009-01-01

The Forest Service, U.S. Department of Agriculture's Forest Inventory and Analysis (FIA) program is incorporating an increasing number of cartographic products in reports, publications, and presentations. To create greater quality and consistency within the national FIA program, a Geospatial Standards team developed cartographic design standards for FIA map...

77 FR 71643 - Standard Mail Pricing

Science.gov (United States)

2012-12-03

... POSTAL REGULATORY COMMISSION [Docket No. R2013-1; Order No.1556] Standard Mail Pricing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a recent Postal Service filing concerning Standard Mail pricing and related matters. This notice informs the public of the filing...

Safety Committees for Argentinean Research Reactor - Regulatory Issues

International Nuclear Information System (INIS)

Perrin, Carlos D.

2009-01-01

In the field of radiological and nuclear safety, the Nuclear Regulatory Authority (ARN) of Argentina controls three research reactors and three critical assemblies, by means of evaluations, audits and inspections, in order to ensure the fulfillment of the requirements established in the Licenses, in the Regulatory Standards and in the Mandatory Documentation in general. From the Nuclear Regulatory Authority's point of view, within the general process of research reactors safety management, the Operational Organization self verification of radiological and nuclear safety plays an outstanding role. In this aspect the ARN has established specific requirements in the Regulatory Standards, in the Operation Licenses and in the Operational Limits and Conditions. These requirements include the figure of different safety committees, which act as reviewers or advisers in diverse situations. This paper describes the main characteristics of the committees, their function, scope and the regulatory documents where the requirements are included. (author)

Management of the Regulatory Authority Information

International Nuclear Information System (INIS)

Suman, H.

2003-01-01

Safe Management of the Regulatory Authority Information is one of the essential elements to ensure the effectiveness of the regulatory program as a whole. This paper briefly describes the information management basis in RNRO, which is in charge of the regulatory authority tasks in Syria. SINA-2, a computational tool prepared in RNRO for managing the information related to the inventory of radiation sources and users, is also introduced

Reliability-based maintenance evaluations and standard preventive maintenance programs

International Nuclear Information System (INIS)

Varno, M.; McKinley, M.

1993-01-01

Due to recent issuance of 10CFR50.65, the U.S. Nuclear Regulatory Commission maintenance rule (Rule), and the open-quotes Industry Guideline for Monitoring the Effectiveness of Maintenance at Nuclear Power Plantsclose quotes prepared by the Nuclear Management and Resources Council, many utilities are undertaking review or evaluation of current preventive maintenance (PM) programs. Although PM optimization and documentation are not specifically required by the Rule, an appropriate and effective PM program (PMP) will be the cornerstone of the successful and cost-effective implementation of the Rule. Currently, a project is being conducted at the Vermont Yankee Nuclear Power Station (VYNPS) in conjunction with Quadrex Energy Services to evaluate, optimize, and document the PMP. The project began in March 1993 and is scheduled for completion in mid-1995. The initial scope for the project is the evaluation of those structures, systems, and components that are within the scope of the Rule. Because of the number of systems to be evaluated (∼50), the desired completion schedule, and cost considerations, a streamlined approach to PM optimization and documentation is being utilized

Annual Report 2008. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2009-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2008. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

Annual Report 2007. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2008-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across tree parts and seven annexes the activities developed by the organism during 2007. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

The regulatory framework of special medical group students' physical education: identifying the problem.

Directory of Open Access Journals (Sweden)

Mazur Valerij Anatol'evich

2011-09-01

Full Text Available The question of regulatory framework for special medical group students' physical education, and their physical condition in particular is elaborated. It is found that in the current program the identified question is missing, although the assessment of individual performance standards for the physical condition of the students was envisaged in the programs of 1977 and 1982. The need for such an assessment is indicated by the large number of Ukrainian and foreign pediatricians and specialists in therapeutic physical culture. At the same time the standards for assessing these indicators are not developed. It complicates the formation of positive motivation of students to regular classes, and does not promote their self-confidence, capabilities and effectiveness of monitoring the effectiveness of exercise in various forms. The findings suggest the need to define the optimal composition of the bulk of tests and functional tests to assess the physical condition of special medical group students with various diseases and to develop appropriate indicators for their evaluation standards.

Automatic compilation from high-level biologically-oriented programming language to genetic regulatory networks.

Science.gov (United States)

Beal, Jacob; Lu, Ting; Weiss, Ron

2011-01-01

The field of synthetic biology promises to revolutionize our ability to engineer biological systems, providing important benefits for a variety of applications. Recent advances in DNA synthesis and automated DNA assembly technologies suggest that it is now possible to construct synthetic systems of significant complexity. However, while a variety of novel genetic devices and small engineered gene networks have been successfully demonstrated, the regulatory complexity of synthetic systems that have been reported recently has somewhat plateaued due to a variety of factors, including the complexity of biology itself and the lag in our ability to design and optimize sophisticated biological circuitry. To address the gap between DNA synthesis and circuit design capabilities, we present a platform that enables synthetic biologists to express desired behavior using a convenient high-level biologically-oriented programming language, Proto. The high level specification is compiled, using a regulatory motif based mechanism, to a gene network, optimized, and then converted to a computational simulation for numerical verification. Through several example programs we illustrate the automated process of biological system design with our platform, and show that our compiler optimizations can yield significant reductions in the number of genes (~ 50%) and latency of the optimized engineered gene networks. Our platform provides a convenient and accessible tool for the automated design of sophisticated synthetic biological systems, bridging an important gap between DNA synthesis and circuit design capabilities. Our platform is user-friendly and features biologically relevant compiler optimizations, providing an important foundation for the development of sophisticated biological systems.

Innovative approach to training radiation safety regulatory professionals

International Nuclear Information System (INIS)

Gilley, Debbie Bray

2008-01-01

Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)

Controlling fuel costs: Procurement strategies and regulatory standards

International Nuclear Information System (INIS)

Einhorn, H.A.; Levi, B.I.

1992-01-01

Since the oil price shocks and inflation of the 1970s, regulatory authorities and utilities have devoted considerable attention to controlling energy costs while maintaining reliable service. Although much of this concern has been directed towards capital cost containment, increasing scrutiny has been applied to a broad range of variable costs, especially to fuel procurement expenditures. With some 40% to 65% of the electric utility industry's annual operation and maintenance expenses paid to secure fuel supplies, even a small difference in fuel costs could have a substantial impact on costs to ratepayers. This increased attention to fuel cost containment can be expected to intensify as implementation of the 1990 amendments to the Clean Air Act affects fuel purchase decisions. To assure that fuel is purchased in a responsible and cost-effective manner, some state jurisdictions have initiated periodic reviews (audits) of the procurement practices that electric utilities follow when purchasing fuel. While a utility must demonstrate how it purchases fuel, there is wide variation in interest and scope of audits among jurisdictions. In this paper, the authors review: (1) the regulatory environment within which fuel procurement and audits occur, and (2) some particularly controversial issues that will receive increasing attention as the practice of conducting fuel procurement audits spreads

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

Energy Technology Data Exchange (ETDEWEB)

Nakarado, Gary L. [Regulatory Logic LLC, Golden, CO (United States)

2017-02-22

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA, to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.

Regulatory Audit Activities on Nuclear Design of Reactor Cores

International Nuclear Information System (INIS)

Yang, Chae-Yong; Lee, Gil Soo; Lee, Jaejun; Kim, Gwan-Young; Bae, Moo-Hun

2016-01-01

Regulatory audit analyses are initiated on the purpose of deep knowledge, solving safety issues, being applied in the review of licensee's results. The current most important safety issue on nuclear design is to verify bias and uncertainty on reactor physics codes to examine the behaviors of high burnup fuel during rod ejection accident (REA) and LOCA, and now regulatory audits are concentrated on solving this issue. KINS develops regulatory audit tools on its own, and accepts ones verified from foreign countries. The independent audit tools are sometimes standardized through participating the international programs. New safety issues on nuclear design, reactor physics tests, advanced reactor core design are steadily raised, which are mainly drawn from the independent examination tools. It is some facing subjects for the regulators to find out the unidentified uncertainties in high burnup fuels and to systematically solve them. The safety margin on nuclear design might be clarified by precisely having independent tools and doing audit calculations by using them. SCALE-PARCS/COREDAX and the coupling with T-H code or fuel performance code would be certainly necessary for achieving these purposes

Regulatory Audit Activities on Nuclear Design of Reactor Cores

Energy Technology Data Exchange (ETDEWEB)

Yang, Chae-Yong; Lee, Gil Soo; Lee, Jaejun; Kim, Gwan-Young; Bae, Moo-Hun [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2016-10-15

Regulatory audit analyses are initiated on the purpose of deep knowledge, solving safety issues, being applied in the review of licensee's results. The current most important safety issue on nuclear design is to verify bias and uncertainty on reactor physics codes to examine the behaviors of high burnup fuel during rod ejection accident (REA) and LOCA, and now regulatory audits are concentrated on solving this issue. KINS develops regulatory audit tools on its own, and accepts ones verified from foreign countries. The independent audit tools are sometimes standardized through participating the international programs. New safety issues on nuclear design, reactor physics tests, advanced reactor core design are steadily raised, which are mainly drawn from the independent examination tools. It is some facing subjects for the regulators to find out the unidentified uncertainties in high burnup fuels and to systematically solve them. The safety margin on nuclear design might be clarified by precisely having independent tools and doing audit calculations by using them. SCALE-PARCS/COREDAX and the coupling with T-H code or fuel performance code would be certainly necessary for achieving these purposes.

A review of standardized patients in clinical education: Implications for speech-language pathology programs.

Science.gov (United States)

Hill, Anne E; Davidson, Bronwyn J; Theodoros, Deborah G

2010-06-01

The use of standardized patients has been reported as a viable addition to traditional models of professional practice education in medicine, nursing and allied health programs. Educational programs rely on the inclusion of work-integrated learning components in order to graduate competent practitioners. Allied health programs world-wide have reported increasing difficulty in attaining sufficient traditional placements for students within the workplace. In response to this, allied health professionals are challenged to be innovative and problem-solving in the development and maintenance of clinical education placements and to consider potential alternative learning opportunities for students. Whilst there is a bank of literature describing the use of standardized patients in medicine and nursing, reports of its use in speech-language pathology clinical education are limited. Therefore, this paper aims to (1) provide a review of literature reporting on the use of standardized patients within medical and allied health professions with particular reference to use in speech-language pathology, (2) discuss methodological and practical issues involved in establishing and maintaining a standardized patient program and (3) identify future directions for research and clinical programs using standardized patients to build foundation clinical skills such as communication, interpersonal interaction and interviewing.

Ontario's standard offer programs: moving toward a cleaner energy future

International Nuclear Information System (INIS)

Shervill, P.

2006-01-01

The Ontario Standard Offer Program is designed to ensure reliable, long-term electricity supply for Ontario. The functional areas of the program are planning, conservation and supply sector development. The long-term plan is to create a self-sustaining electricity market in Ontario with 2700 MW renewable sources by 2010 including wind, waterpower, solar photovoltaic (PV) and biomass

24 CFR 200.950 - Building product standards and certification program for solar water heating system.

Science.gov (United States)

2010-04-01

... PROGRAMS Minimum Property Standards § 200.950 Building product standards and certification program for...) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

Regulatory Barriers Blocking Standardization of Interoperability

OpenAIRE

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-01-01

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the ad...

Regulatory impact analysis of national emissions standards for hazardous air pollutants for by-product coke oven charging, door leaks, and topside leaks. Draft report

International Nuclear Information System (INIS)

1992-11-01

Under the authority of the 1990 Clean Air Act Amendments, a Natioal Emissions Standard for Hazardous Air Pollutants is proposed to control emissions from By-product Coke Oven Charging, door leaks, and topside leaks. Because the EPA considers the regulation for By-product Coke Oven batteries to be a major rule, the attached Regulatory Impact Analysis was prepared to fulfill the requirements of E012291. The document reviews the need for regulation, control techniques, regulatory options, costs of control, economic impacts, benefits of the regulation, and compares benefits and costs associated with the regulation

Air toxics regulatory issues facing urban settings

Energy Technology Data Exchange (ETDEWEB)

Olden, K.; Guthrie, J. [National Institute of Environmental Health Sciences, Research Triangle Park, NC (United States)

1996-10-01

Biomarker research does not exist in isolation. Its usefulness can only be realized when it is translated into prevention strategies to protect public health. In the context of air toxics, these prevention strategies begin with the development of regulatory standards derived from risk assessment schemes. The Clean Air Act Amendments of 1990 list 189 air toxics, including many volatile organics, metals, and pesticides. The National Institute of Environmental Health Sciences (NIEHS), through its affiliation with the National Toxicology Program, has generated toxicity and carcinogenicity data on more than 100 of these air toxics. The NIEHS extramural and intramural research portfolios support a variety of projects that develop and validate biomarkers for use in environmental health science and risk assessment. Biomarkers have a tremendous potential in the areas of regulating air toxics and protecting public health. Risk assessors need data provided by biomarkers of exposure, biomarkers of close/pharmacokinetics, biomarkers of susceptibility or individual variability, and biomarkers of effects. The greatest benefit would be realized if biomarkers could be employed in four areas of primary and secondary prevention. The first is the use of biomarkers to enhance extrapolation of animal data to human exposure situations in establishing risk standards. The second is the use of biomarkers that assess noncancer, as well as cancer, end points. Important health end points include pulmonary dysfunction, immunotoxicity, and neurotoxicity. Third, biomarkers that serve as early warning signs to detect intermediate effects would enhance our ability to design timely and cost-effective intervention strategies. Finally, biomarkers used to evaluate the effectiveness of intervention strategies both in clinical and regulatory settings, would enable us to ensure that programs designed to protect public health do, in fact, achieve the desired outcome. 9 refs., 2 tabs.

Comparison of regulatory framework among bench marking countries for improving regulatory effectiveness in Malaysia

International Nuclear Information System (INIS)

Khairuddin, Nik Mohd Faiz Bin; Choi, Kwang Sik

2010-01-01

Nowadays some of developing countries in Asian region are announcing their planning to embark the nuclear power program. This progression are rising due to four factor: increasing political instabilities in fossil-fuel exporting countries; declining domestic natural energy resources; growing concerns about greenhouse gas emissions; and increasing demand for electricity. This paper gives a study on the comparison between Canada, Republic of South Korea and Malaysia regarding to their regulatory framework as well as the licensing procedures in controlling the nuclear power plants establishment. Canada and Korea were selected to study because of both of the countries have different system in controlling the nuclear power plants in terms of its regulatory framework as well as the licensing process. The idea is to compare these countries along with the guidelines by the IAEA and to find out what Malaysia could be learn to start the nuclear power program and find out the best practice in nuclear licensing. Factors taken into consideration are the regulatory framework, especially the nature of the licensing authority, the licensing process and enforcement actions. Together, these give a way to evaluate the effectiveness of the regulatory body due to the licensing authorization of nuclear power plant

Comparison of regulatory framework among bench marking countries for improving regulatory effectiveness in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Khairuddin, Nik Mohd Faiz Bin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Choi, Kwang Sik [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2010-05-15

Nowadays some of developing countries in Asian region are announcing their planning to embark the nuclear power program. This progression are rising due to four factor: increasing political instabilities in fossil-fuel exporting countries; declining domestic natural energy resources; growing concerns about greenhouse gas emissions; and increasing demand for electricity. This paper gives a study on the comparison between Canada, Republic of South Korea and Malaysia regarding to their regulatory framework as well as the licensing procedures in controlling the nuclear power plants establishment. Canada and Korea were selected to study because of both of the countries have different system in controlling the nuclear power plants in terms of its regulatory framework as well as the licensing process. The idea is to compare these countries along with the guidelines by the IAEA and to find out what Malaysia could be learn to start the nuclear power program and find out the best practice in nuclear licensing. Factors taken into consideration are the regulatory framework, especially the nature of the licensing authority, the licensing process and enforcement actions. Together, these give a way to evaluate the effectiveness of the regulatory body due to the licensing authorization of nuclear power plant

Approach of Czech regulatory body to LBB

Energy Technology Data Exchange (ETDEWEB)

Tendera, P.

1997-04-01

At present there are two NPPs equipped with PWR units in Czech Republic. The Dukovany, NPP is about ten years in operation (four units 440 MW - WWBFL model 213) and Tomelin NPP is under construction (two units 1000 MW - WWER model 320). Both NPPs were built to Soviet design and according to Soviet regulations and standards but most of equipment for primary circuits was supplied by home manufacturers. The objective of the Czech LBB program is to prove the LBB status of the primary piping systems of there NPPs and the LBB concept is a part of strategy to meet western style safety standards. The reason for the Czech LBB project is a lack of some standard safety Facilities too. For both Dukovany and Tomelin NPPs a full LBB analysis should be carried out. The application of LBB to the piping system should be also a cost effective means to avoid installations of pipe whip restraints and jet shields. The Czech regulatory body issued non-mandatory requirement, {open_quotes}Leak Before Break{close_quotes} which is in compliance with national legal documents and which is based on the US NRC Regulatory Procedures and US standards (ASMF CODE, ANSI). The requirement has been published in the document {open_quotes}Safety of Nuclear Facilities{close_quotes} No 1/1991 as {open_quotes}Requirements on the Content and Format of Safety Reports and their Supplements{close_quote} and consist of two parts (1) procedure for obtaining proof of evidence {open_quotes}Leak Before Break{close_quotes} (2) leak detection systems for the pressurized reactor primary circuit. At present some changes concerning both parts of the above document will be introduced. The reasons for this modifications will be presented.

Role of secondary standard dosimetry laboratory in radiation protection program

International Nuclear Information System (INIS)

Rahman, Sohaila; Ali, Noriah Mohd.

2008-01-01

Full text: The radiation dosimetry program is an important element of operational radiation protection. Dosimetry data enable workers and radiation protection professionals to evaluate and control work practices to eliminate unnecessary exposure to ionizing radiation. The usefulness of the data produced however depends on its quality and traceability. The emphasis of the global dosimetry program is focused through the IAEA/WHO network of secondary standard dosimetry laboratories (SSDLs), which aims for the determination of SI quantities through proper traceable calibration of radiation protection equipment. The responsibility of SSDL-NUCLEAR MALAYSIA to guarantee a reliable dosimetry service, which is traceable to international standards, is elucidated. It acts as the basis for harmonized occupational radiation monitoring in Malaysia.

The Nuclear Regulatory Commission's research reactor inspection program

International Nuclear Information System (INIS)

Constable, George L.

1977-01-01

The Division of Reactor Inspection Program's functional responsibilities are presented. The include (a) inspections and investigations necessary to determine whether licensees are complying with license provisions and rules, and to ascertain whether licensed operations are being conducted safely; (b) establishment of bases for the issuance or denial of a construction permit or license; (c) investigation of accidents, incidents, and theft or diversion of special nuclear materials; (d) enforcement actions; and (e) evaluation of licensed operations as a basis for recommending changes to standards and license conditions and for issuance of reports to the nuclear industry and the public

13 CFR 120.463 - Regulatory accounting-What are SBA's regulatory accounting requirements for SBA Supervised Lenders?

Science.gov (United States)

2010-01-01

... basis in accordance with Generally Accepted Accounting Principles (GAAP) as promulgated by the Financial Accounting Standards Board (FASB), supplemented by Regulatory Accounting Principles (RAP) as identified by... set forth in FASB Statement of Financial Accounting Standards No. 15, Accounting by Debtors and...

Design of an internal dosimetry program

International Nuclear Information System (INIS)

Wu, C.F.; Goff, T.E.

2004-01-01

Measurement of radiation dose is an essential element of radiation protection programs at nuclear facilities. To protect workers and demonstrate compliance with regulatory requirements, dosimetry programs must be established based on sound technical basis. Historically, external exposure was controlled by occupational dose limits. Internal exposure to radionuclides was limited by maximum permissible body burden and maximum permissible concentration. With the issuance of ICRP 26, ICRP 30, DOE Order 5480.11, DOE/EH-0256T, and the new 10 CFR 20, it has become a requirement that internal dose be assessed and the sum of internal and external doses be maintained below regulatory limits. Nuclear facilities are required to have internal dose evaluation programs adequate to demonstrate compliance with radiation protection standards (RPSs). The Waste Isolation Pilot Plant is a DOE facility designed to demonstrate safe disposal of transuranic (TRU) wastes in an ancient salt bed 2,150 feet underground. Internal dose measurement is required to support waste handling activities. This paper describes the technical basis for the WIPP Internal Dosimetry Program. (author)

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

International Nuclear Information System (INIS)

1993-03-01

The primary objective of the Early Site Plan Demonstration Program (ESPDP) is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. This document provides appendices C and D of this report. Appendix C contains data from the licensing and technical reviews; Appendix D contains technology toolkit data sheets

Technical assistance for regulatory development: review and evaluation of the EPA standard 40 CFR191 for disposal of high-level waste. Vol. 1

International Nuclear Information System (INIS)

Ortiz, N.R.; Wahi, K.K.

1983-04-01

The Environmental Protection Agency (EPA) has prepared a draft Standard (40CFR191, Draft 19) which, when finalized, will provide the overall system requirements for the geologic disposal of radioactive waste. This document (Vol. 1) provides an Executive Summary of the work performed at Sandia National Laboratories, Albuquerque, NM, under contract to the US Nuclear Regulatory Commission to analyze certain aspects of the draft Standard. The issues of radionuclide release limits, interpretation, uncertainty, achievability, and assessment of compliance with respect to the requirements of the draft Standard are addressed based on the detailed analyses presented in five companion volumes to this report

A global regulatory science agenda for vaccines.

Science.gov (United States)

Elmgren, Lindsay; Li, Xuguang; Wilson, Carolyn; Ball, Robert; Wang, Junzhi; Cichutek, Klaus; Pfleiderer, Michael; Kato, Atsushi; Cavaleri, Marco; Southern, James; Jivapaisarnpong, Teeranart; Minor, Philip; Griffiths, Elwyn; Sohn, Yeowon; Wood, David

2013-04-18

The Decade of Vaccines Collaboration and development of the Global Vaccine Action Plan provides a catalyst and unique opportunity for regulators worldwide to develop and propose a global regulatory science agenda for vaccines. Regulatory oversight is critical to allow access to vaccines that are safe, effective, and of assured quality. Methods used by regulators need to constantly evolve so that scientific and technological advances are applied to address challenges such as new products and technologies, and also to provide an increased understanding of benefits and risks of existing products. Regulatory science builds on high-quality basic research, and encompasses at least two broad categories. First, there is laboratory-based regulatory science. Illustrative examples include development of correlates of immunity; or correlates of safety; or of improved product characterization and potency assays. Included in such science would be tools to standardize assays used for regulatory purposes. Second, there is science to develop regulatory processes. Illustrative examples include adaptive clinical trial designs; or tools to analyze the benefit-risk decision-making process of regulators; or novel pharmacovigilance methodologies. Included in such science would be initiatives to standardize regulatory processes (e.g., definitions of terms for adverse events [AEs] following immunization). The aim of a global regulatory science agenda is to transform current national efforts, mainly by well-resourced regulatory agencies, into a coordinated action plan to support global immunization goals. This article provides examples of how regulatory science has, in the past, contributed to improved access to vaccines, and identifies gaps that could be addressed through a global regulatory science agenda. The article also identifies challenges to implementing a regulatory science agenda and proposes strategies and actions to fill these gaps. A global regulatory science agenda will enable

Public Utility Regulatory Policies Act of 1978. Annual report to Congress

Energy Technology Data Exchange (ETDEWEB)

None,

1980-05-01

Titles I and III of the Public Utility Regulatory Policies Act of 1978 (PURPA) establish retail regulatory policies for electric and natural gas utilities, respectively, aimed at achieving three purposes: conservation of energy supplied by electric and gas utilities; efficiency in the use of facilities and resources by these utilities; equitable rates to electricity and natural gas consumers. PURPA also continues the pilot utility implementation program, authorized under Title II of the Energy Conservation and Production ACT (ECPA), to encourage adoption of cost-based rates and efficient energy-management practices. The purpose of this report is twofold: (1) to summarize and analyze the progress that state regulatory authorities and certain nonregulated utilities have made in their consideration of the PURPA standards; and (2) to summarize the Department of Energy (DOE) activities relating to PURPA and ECPA. The report provides a broad overview and assessment of the status of electric and gas regulation nationwide, and thus helps provide the basis for congressional and DOE actions targeted on the utility industry to address pressing national energy problems.

Regulatory barriers to hazardous waste technology innovation

International Nuclear Information System (INIS)

Kuusinen, T.L.; Siegel, M.R.

1991-02-01

The primary federal regulatory programs that influence the development of new technology for hazardous waste are the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA, also commonly known as Superfund). Two important aspects of RCRA that can create barriers to hazardous waste technology innovation are technology-based waste pre-treatment standards and a cumbersome permitting program. By choosing a technology-based approach to the RCRA land disposal restrictions program, the US Environmental Protection Agency (EPA) has simultaneously created tremendous demand for the technologies specified in its regulations, while at the same time significantly reduced incentives for technology innovation that might have otherwise existed. Also, the RCRA hazardous waste permitting process can take years and cost hundreds of thousands of dollars. The natural tendency of permit writers to be cautious of unproven (i.e., innovative) technology also can create a barrier to deployment of new technologies. EPA has created several permitting innovations, however, to attempt to mitigate this latter barrier. Understanding the constraints of these permitting innovations can be important to the success of hazardous waste technology development programs. 3 refs

The regulatory framework in the UK

International Nuclear Information System (INIS)

O'Sullivan, R.

1984-01-01

The subject is covered in sections, headed: basic regulatory requirements covering the transport of radioactive material in the UK; responsibility for safety (competent authority; provision of regulations; implementation of regulations (international and national); design of transport flask; safety case; testing; assessment; approval certificate; compliance assurance; administration); advice and information on the regulatory safety standards. (U.K.)

Annual Report 2009. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2010-01-01

The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2009. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the environmental monitoring; the occupational surveillance; the training and the public information; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

Genetic Programming and Standardization in Water Temperature Modelling

Directory of Open Access Journals (Sweden)

Maritza Arganis

2009-01-01

Full Text Available An application of Genetic Programming (an evolutionary computational tool without and with standardization data is presented with the aim of modeling the behavior of the water temperature in a river in terms of meteorological variables that are easily measured, to explore their explanatory power and to emphasize the utility of the standardization of variables in order to reduce the effect of those with large variance. Recorded data corresponding to the water temperature behavior at the Ebro River, Spain, are used as analysis case, showing a performance improvement on the developed model when data are standardized. This improvement is reflected in a reduction of the mean square error. Finally, the models obtained in this document were applied to estimate the water temperature in 2004, in order to provide evidence about their applicability to forecasting purposes.

Design control for standard U.S. EPRTM plants

International Nuclear Information System (INIS)

Mathews, Toney A.; Miller, Matthew P.

2009-01-01

The U.S. EPR TM design is being reviewed by the U.S. Nuclear Regulatory Commission (NRC) for reference by utility applicants to build and operate EPR TM nuclear reactors in the United States. While the U.S. EPR TM Design Certification and utility Combined License Applications are being reviewed by the NRC, the AREVA-Bechtel Consortium for Engineering Procurement and Construction is proceeding with developing the detailed design. Multiple, parallel regulatory and engineering activities require carefully prepared documents and rigorous design control processes. This paper will review the design control processes used by the AREVA-Bechtel Consortium. Design control must consider the basic design processes required to achieve an integrated, functional design, as well as design change control. Sources of change and the need to keep design bases and licensing bases consistent must be thoroughly understood. An objective of the U.S. EPR TM reactor deployment program for the United States is to achieve maximum standardization of common features of the plant. Such standardization is necessary for economics, speed-of-construction, and operational efficiencies available from a 'fleet' approach to deployment. (author)

Superfund TIO videos. Set A. Regulatory overview - CERCLA's relationship to other programs: RCRA, Title III, UST, CWA, SDWA. Part 1. Audio-Visual

International Nuclear Information System (INIS)

1990-01-01

The videotape is divided into five sections. Section 1 provides definitions and historical information on both the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The four types of RCRA regulatory programs - Subtitles C, D, I, and J - are described. Treatment, storage, and disposal (TSD) and recycling facilities are also discussed. Section 2 discusses the history behind the Emergency Planning and Community Right-to-Know Act (Title III). The four major provisions of Title III, which are emergency planning, emergency release notification, community right-to-know reporting, and the toxic chemical release inventory are covered. Section 3 outlines the UST program covering notification, record keeping, and the UST Trust Fund. Section 4 outlines the six major provisions of the Clean Water Act (CWA): water quality, pretreatment, prevention of oil and hazardous substance discharges, responses to oil and hazardous substance discharges, discharges of hazardous substances into the ocean, and dredge and fill. Section 5 explains the purpose, regulations, and standards of the Safe Drinking Water Act (SDWA). Specific issues such as underground injection, sole source aquifers, and lead contamination are discussed

Proposed Accreditation Standards for Degree-Granting Correspondence Programs Offered by Accredited Institutions.

Science.gov (United States)

McGraw-Hill Continuing Education Center, Washington, DC.

A study on proposed accreditation standards grew out of a need to (1) stimulate the growth of quality correspondence degree programs; and (2) provide a policy for accreditation of correspondence degree programs so that graduates would be encouraged to pursue advanced degree programs offered elsewhere by educational institutions. The study focused…

41 CFR 101-26.501-2 - Standardized buying programs.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Standardized buying programs. 101-26.501-2 Section 101-26.501-2 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26-PROCUREMENT...

75 FR 6404 - Regulatory Site Visit Training Program

Science.gov (United States)

2010-02-09

... review efficiency and quality, and the quality of its regulatory efforts and interactions, by providing... tissue establishments. The visits may include packaging facilities, quality control and pathology...

Marketing Program Standardization: The Experience of TNCs in Poland

Directory of Open Access Journals (Sweden)

Mariusz Sagan

2016-01-01

Full Text Available The purpose of this study is to determine the rate of standardization of marketing programs in transnational corporations in the consumer goods market in Poland, which currently is one of the fastest growing markets in the world. An important research objective was to observe how Polish consumers adopt the marketing patterns and related lifestyles from countries of Western Europe and the USA. The empirical tests and data, collected in a sample survey of 35 transnational corporations and their 140 products, and using varied methods of statistical inference, allowed to formulate the following conclusions. The analyzed TNC’s adopted a clear standardization strategy in the Polish market. Among the analyzed products, 2/3 of them have been entirely transferred from foreign markets into the Polish market. A detailed analysis has indicated that the standardization rate of product and its items in the FMCG market in Poland is high and very high, and significantly higher than the pricing and advertising strategy standardization rates. The product standardization rate in the Polish market has been slightly higher than the rate in the developed countries, yet the pricing standardization has been significantly lower. The standardization of advertising strategies showed similar features.

Switzerland; Financial Sector Assessment Program: Factual Update: Insurance Sector Market and Regulatory Developments

OpenAIRE

International Monetary Fund

2007-01-01

This paper presents a factual update of the Insurance Core Principles including insurance sector market and regulatory developments for Switzerland. Regulatory reforms since 2003 have updated Switzerland’s regulatory and supervisory regime for the insurance industry to bring it in line with international best practices. The Insurance Supervision Law (ISL) has reoriented the regulatory focus and expanded the regulatory scope to include group/conglomerate supervision, corporate governance, risk...

Annual report to the Atomic Energy Control Board on the Regulatory Research and Support Program April 1, 1994 - March 31, 1995

International Nuclear Information System (INIS)

1996-03-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. During Fiscal Year 1994/95, a total of $3.245M was spent of RSP research and support work. The range of activities included projects in the general fields of nuclear reactors, fuel cycle facilities, uranium mines and mills, waste management, dosimetry, health physics, regulations and regulatory process development, and other special support services. Some of this work was organized into sub-program groups, each of which addresses research and support effort in theme-related areas. Five sub-programs were launched during the year bringing to eight the total number of such sub-programs. Areas addressed in the sub-programs are environmental impact assessment and management, safety critical software, seismologic studies, pressure boundary integrity, integrity of containment and safety-related structures, human factors, internal dosimetry, and health effects in human populations. During the year, there were a total of 157 active projects

Review and evaluation of the Nuclear Regulatory Commission Safety Research Program for Fiscal Years 1984 and 1985

International Nuclear Information System (INIS)

1983-02-01

This is the sixth report by the Advisory Committee on Reactor Safeguards (ACRS) that has been prepared in response to the Congressional requirement for an annual report on the Nuclear Regulatory Commission (NRC) Reactor Safety Research Program. Part I is a compilation of our general comments and recommendations regarding the NRC Safety Research Program, and includes budget recommendations and an identification of matters of special importance that deserve increased emphasis. It is intended to serve as an Executive Summary. Part II is divided into ten chapters, each of which represents a Decision Unit of the NRC research program. In each chapter, specific comments are included on the research involved in the Decision Unit, an assessment of priorities, and recommendations regarding new directions and levels of funding

Developing Standards for Language Teacher Education Programs in Indonesia: Professionalizing or Losing in Complexity?

Directory of Open Access Journals (Sweden)

Luciana Luciana

2004-01-01

Full Text Available Setting standards for language teacher education programs, materials, and evaluation sparks some hope in attempts to improve the quality of the programs. Yet, this very fact augmented by my examination of ten language teacher education programs in Java, Bali, and Lampung (FKIP and PGRI triggers a critical look at the idea of standard development. In particular, I would like to explore whether it can lead to a better professionalism or we are just lost in the complexity of the standardization itself. This paper consists of four sections. Departing from an overview of language teacher education programs in Indonesia and the theoretical foundations, some major problems in this area are identified. Following this, the discussion is focused on the idea of standard development for language teacher education programs in Indonesia. Eventually, some suggestions are put forth to highlight the need for establishing coherent curriculum framework bridging the two realms of language teacher education and school milieu as well as providing learners with knowledge base that enables them to cope with complex demands of school settings and more essentially, to act as an agent in the social change process.

25 CFR 36.12 - Standard III-Program needs assessment.

Science.gov (United States)

2010-04-01

...., (1) Perceptions of the parents, tribes, educators, and the students with regard to the relevance and....12 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS... Program Evaluation. This assessment shall include at least the following: (a) A clear statement of student...

Using the IRRS to Strengthen Regulatory Competence in Ireland

International Nuclear Information System (INIS)

Smith, K.

2016-01-01

In 2015, Ireland underwent an IRRS (Integrated Regulatory Review Service) review mission. The purpose of the mission was to review Ireland’s radiation and nuclear safety regulatory framework and activities against the relevant IAEA safety standards, to report on the regulatory effectiveness and to exchange information and experience in the areas covered by the IRRS. The review mission was well-timed as there had been recent changes in the regulatory infrastructure with the merger of the Radiological Protection Institute of Ireland (RPII) and the Environmental Protection Agency (EPA) in 2014, as well as the upcoming implementation of the new Euratom Basic Safety Standards (BSS) Directive. The key objectives of the mission were to enhance the national legal, governmental and regulatory framework for nuclear and radiation safety, and national arrangements for emergency preparedness and response. The agreed scope of the review covered all relevant facilities and activities regulated in Ireland and also included medical exposures and public exposure to radon. In advance of the mission, Ireland completed a process of self-assessment and review. This process identified strengths and weaknesses in the national regulatory framework compared with the international standards. In addition to the value of having Ireland’s radiation protection framework peer reviewed by senior international experts, the mission helped to further strengthen links between all the national bodies (government, licensees, regulatory) with a role in the regulation of radiation safety. The findings from the IRRS review team’s objective evaluation of Ireland’s regulatory infrastructure are being used to prioritise actions for strengthening the regulatory framework, to provide input into the transposition of the Euratom BSS, and to support the revision of the national emergency plan for nuclear accidents. It is planned to have addressed the findings of the IRRS mission in advance of a follow up

Standard Review Plan Update and Development Program

International Nuclear Information System (INIS)

1992-05-01

This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures

Standard Review Plan Update and Development Program

Energy Technology Data Exchange (ETDEWEB)

1992-05-01

This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures.

Nuclear Plant Aging Research (NPAR) program plan

International Nuclear Information System (INIS)

1991-06-01

A comprehensive Nuclear Plant Aging Research (NPAR) Program was implemented by the US NRC office of Nuclear Regulatory Research in 1985 to identify and resolve technical safety issues related to the aging of systems, structures, and components in operating nuclear power plants. This is Revision 2 to the Nuclear Plant Aging Research Program Plant. This planes defines the goals of the program the current status of research, and summarizes utilization of the research results in the regulatory process. The plan also describes major milestones and schedules for coordinating research within the agency and with organizations and institutions outside the agency, both domestic and foreign. Currently the NPAR Program comprises seven major areas: (1) hardware-oriented engineering research involving components and structures; (2) system-oriented aging interaction studies; (3) development of technical bases for license renewal rulemaking; (4) determining risk significance of aging phenomena; (5) development of technical bases for resolving generic safety issues; (6) recommendations for field inspection and maintenance addressing aging concerns; (7) and residual lifetime evaluations of major LWR components and structures. The NPAR technical database comprises approximately 100 NUREG/CR reports by June 1991, plus numerous published papers and proceedings that offer regulators and industry important insights to aging characteristics and aging management of safety-related equipment. Regulatory applications include revisions to and development of regulatory guides and technical specifications; support to resolve generic safety issues; development of codes and standards; evaluation of diagnostic techniques; (e.g., for cables and valves); and technical support for development of the license renewal rule. 80 refs., 25 figs., 10 tabs

A compliance testing program for diagnostic X-ray equipment

International Nuclear Information System (INIS)

Hutchinson, D.E.; Cobb, B.J.; Jacob, C.S.

1999-01-01

Compliance testing is nominally that part of a quality assurance program dealing with those aspects of X-ray equipment performance that are subject to radiation control legislation. Quality assurance programs for medical X-ray equipment should be an integral part of the quality culture in health care. However while major hospitals and individual medical centers may implement such programs with some diligence, much X-ray equipment can remain unappraised unless there is a comprehensive regulatory inspection program or some form of compulsion on the equipment owner to implement a testing program. Since the late 1950s all X-ray equipment in the State of Western Australia has been inspected by authorized officers acting on behalf of the Radiological Council, the regulatory authority responsible for administration of the State's Radiation Safety Act. However, economic constraints, coupled with increasing X-ray equipment numbers and a geographically large State have significantly affected the inspection rate. Data available from inspections demonstrate that regular compliance and performance checks are essential in order to ensure proper performance and to minimize unnecessary patient and operator dose. To ensure that diagnostic X-ray equipment complies with accepted standards and performance criteria, the regulatory authority introduced a compulsory compliance testing program for all medical, dental and chiropractic diagnostic X-ray equipment effective from 1 January 1997

Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

Science.gov (United States)

Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

2015-01-01

The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

76 FR 76168 - Regulatory Site Visit Training Program

Science.gov (United States)

2011-12-06

... quality of its regulatory efforts and interactions, by providing CBER staff with a better understanding of... may include the following: (1) Packaging facilities, (2) quality control and pathology/toxicology...

76 FR 4919 - Regulatory Site Visit Training Program

Science.gov (United States)

2011-01-27

... quality of its regulatory efforts and interactions, by providing CBER staff with a better understanding of... may include the following: (1) Packaging facilities, (2) quality control and pathology/toxicology...

Nuclear security standard: Argentina approach

International Nuclear Information System (INIS)

Bonet Duran, Stella M.; Rodriguez, Carlos E.; Menossi, Sergio A.; Serdeiro, Nelida H.

2007-01-01

Argentina has a comprehensive regulatory system designed to assure the security and safety of radioactive sources, which has been in place for more than fifty years. In 1989 the Radiation Protection and Nuclear Safety branch of the National Atomic Energy Commission created the 'Council of Physical Protection of Nuclear Materials and Installations' (CAPFMIN). This Council published in 1992 a Physical Protection Standard based on a deep and careful analysis of INFCIRC 225/Rev.2 including topics like 'sabotage scenario'. Since then, the world's scenario has changed, and some concepts like 'design basis threat', 'detection, delay and response', 'performance approach and prescriptive approach', have been applied to the design of physical protection systems in facilities other than nuclear installations. In Argentina, radioactive sources are widely used in medical and industrial applications with more than 1,600 facilities controlled by the Nuclear Regulatory Authority (in spanish ARN). During 2005, measures like 'access control', 'timely detection of intruder', 'background checks', and 'security plan', were required by ARN for implementation in facilities with radioactive sources. To 'close the cycle' the next step is to produce a regulatory standard based on the operational experience acquired during 2005. ARN has developed a set of criteria for including them in a new standard on security of radioactive materials. Besides, a specific Regulatory Guide is being prepared to help licensees of facilities in design a security system and to fulfill the 'Design of Security System Questionnaire'. The present paper describes the proposed Standard on Security of Radioactive Sources and the draft of the Nuclear Security Regulatory Guidance, based on our regulatory experience and the latest international recommendations. (author)

Recommendations for a proposed standard for performing systems analysis

International Nuclear Information System (INIS)

LaChance, J.; Whitehead, D.; Drouin, M.

1998-01-01

In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

Assessment of the Impacts of Standards and Labeling Programs inMexico (four products).

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Itha; Pulido, Henry; McNeil, Michael A.; Turiel, Isaac; della Cava, Mirka

2007-06-12

This study analyzes impacts from energy efficiency standards and labeling in Mexico from 1994 through 2005 for four major products: household refrigerators, room air conditioners, three-phase (squirrel cage) induction motors, and clothes washers. It is a retrospective analysis, seeking to assess verified impacts on product efficiency in the Mexican market in the first ten years after standards were implemented. Such an analysis allows the Mexican government to compare actual to originally forecast program benefits. In addition, it provides an extremely valuable benchmark for other countries considering standards, and to the energy policy community as a whole. The methodology for evaluation begins with historical test data taken for a large number of models of each product type between 1994 and 2005. The pre-standard efficiency of models in 1994 is taken as a baseline throughout the analysis. Model efficiency data were provided by an independent certification laboratory (ANCE), which tested products as part of the certification and enforcement mechanism defined by the standards program. Using this data, together with economic and market data provided by both government and private sector sources, the analysis considers several types of national level program impacts. These include: Energy savings; Environmental (emissions) impacts, and Net financial impacts to consumers, manufacturers and utilities. Energy savings impacts are calculated using the same methodology as the original projections, allowing a comparison. Other impacts are calculated using a robust and sophisticated methodology developed by the Instituto de Investigaciones Electricas (IIE) and Lawrence Berkeley National Laboratory (LBNL), in a collaboration supported by the Collaborative Labeling and Standards Program (CLASP).

Nuclear Regulatory Commission probabilistic risk assessment implementation program: A status report

International Nuclear Information System (INIS)

Rubin, M.P.; Caruso, M.A.

1996-01-01

The US Nuclear Regulatory Commission (NRC) is undertaking a number of activities intended to increase the consideration of risk significance in its decision processes and the effective use of risk-based technologies in its regulatory activities. Although the NRC is moving toward risk-informed regulation throughout its areas of responsibilities, this paper focuses primarily on those issues associated with reactor regulation. As the NRC completed significant milestones in its development of probabilistic risk assessment (PRA) methodology and gained considerable experience in the limited application of risk assessment to selected regulatory activities, it became evident that a much broader use of risk informed approaches offered advantages to both the NRC and the US commercial nuclear industry. This desire to enhance the use of risk assessment is driven by the clear belief that application of PRA methods will result in direct improvements in nuclear power plant operational safety from the perspective of both the regulator and the plant operator. The NRC believed that an overall policy on the use of PRA methods in nuclear regulatory activities should be established so that the many potential applications of PRA could be implemented in a consistent and predictable manner that would promote regulatory stability and efficiency. This paper describes the key activities that the NRC has undertaken to implement the initial stages of an integrated risk-informed regulatory framework

Regulatory Promotion of Emergent CCS Technology

Energy Technology Data Exchange (ETDEWEB)

Davies, Lincoln; Uchitel, Kirsten; Johnson, David

2014-01-01

Despite the growing inevitability of climate change and the attendant need for mitigation strategies, carbon capture and sequestration (CCS) has yet to gain much traction in the United States. Recent regulatory proposals by the U.S. Environmental Protection Agency (EPA), limited in scope to new-build power plants, represent the only significant policy initiative intended to mandate diffusion of CCS technology. Phase I of this Project assessed barriers to CCS deployment as prioritized by the CCS community. That research concluded that there were four primary barriers: (1) cost, (2) lack of a carbon price, (3) liability, and (4) lack of a comprehensive regulatory regime. Phase II of this Project, as presented in this Report, assesses potential regulatory models for CCS and examines where those models address the hurdles to diffusing CCS technology identified in Phase I. It concludes (1) that a CCS-specific but flexible standard, such as a technology performance standard or a very particular type of market-based regulation, likely will promote CCS diffusion, and (2) that these policies cannot work alone, but rather, should be combined with other measures, such as liability limits and a comprehensive CCS regulatory regime.

A Model of Yeast Cell-Cycle Regulation Based on a Standard Component Modeling Strategy for Protein Regulatory Networks.

Directory of Open Access Journals (Sweden)

Teeraphan Laomettachit

Full Text Available To understand the molecular mechanisms that regulate cell cycle progression in eukaryotes, a variety of mathematical modeling approaches have been employed, ranging from Boolean networks and differential equations to stochastic simulations. Each approach has its own characteristic strengths and weaknesses. In this paper, we propose a "standard component" modeling strategy that combines advantageous features of Boolean networks, differential equations and stochastic simulations in a framework that acknowledges the typical sorts of reactions found in protein regulatory networks. Applying this strategy to a comprehensive mechanism of the budding yeast cell cycle, we illustrate the potential value of standard component modeling. The deterministic version of our model reproduces the phenotypic properties of wild-type cells and of 125 mutant strains. The stochastic version of our model reproduces the cell-to-cell variability of wild-type cells and the partial viability of the CLB2-dbΔ clb5Δ mutant strain. Our simulations show that mathematical modeling with "standard components" can capture in quantitative detail many essential properties of cell cycle control in budding yeast.

A hybrid health service accreditation program model incorporating mandated standards and continuous improvement: interview study of multiple stakeholders in Australian health care.

Science.gov (United States)

Greenfield, David; Hinchcliff, Reece; Hogden, Anne; Mumford, Virginia; Debono, Deborah; Pawsey, Marjorie; Westbrook, Johanna; Braithwaite, Jeffrey

2016-07-01

The study aim was to investigate the understandings and concerns of stakeholders regarding the evolution of health service accreditation programs in Australia. Stakeholder representatives from programs in the primary, acute and aged care sectors participated in semi-structured interviews. Across 2011-12 there were 47 group and individual interviews involving 258 participants. Interviews lasted, on average, 1 h, and were digitally recorded and transcribed. Transcriptions were analysed using textual referencing software. Four significant issues were considered to have directed the evolution of accreditation programs: altering underlying program philosophies; shifting of program content focus and details; different surveying expectations and experiences and the influence of external contextual factors upon accreditation programs. Three accreditation program models were noted by participants: regulatory compliance; continuous quality improvement and a hybrid model, incorporating elements of these two. Respondents noted the compatibility or incommensurability of the first two models. Participation in a program was reportedly experienced as ranging on a survey continuum from "malicious compliance" to "performance audits" to "quality improvement journeys". Wider contextual factors, in particular, political and community expectations, and associated media reporting, were considered significant influences on the operation and evolution of programs. A hybrid accreditation model was noted to have evolved. The hybrid model promotes minimum standards and continuous quality improvement, through examining the structure and processes of organisations and the outcomes of care. The hybrid model appears to be directing organisational and professional attention to enhance their safety cultures. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Uses of ANSI/HPS N13.12-1999, "Surface and Volume Radioactivity Standards for Clearance" and Comparison with Existing Standards

Energy Technology Data Exchange (ETDEWEB)

Stansbury, Paul S.; Strom, Daniel J.

2001-04-30

In August of 1999, the American National Standards Institute (ANSI) approved a standard for clearance of materials contaminated with residual levels of radioactivity. "Clearance," as used in the standard, means the movement of material from the control of a regulatory agency to a use or disposition that has no further regulatory controls of any kind. The standard gives derived screening levels (DSLs) in Bq/g and Bq/cm2 for 50 radionuclides. Items or materials with residual surface and volume radioactivity levels below the DSLs can be cleared, that is, managed without regard to their residual radioactivity. Since federal agencies are to use voluntary, industry standards developed by the private sector whenever possible, the standard should play an important role in DOE's regulatory process. The thrust of this report is to explain the standard, make simple observations on its usefulness to DOE, and to explore uses of the standard within DOE facilities beyond the clearance of radioactive materials.

Techniques for analyzing the impacts of certain electric-utility ratemaking and regulatory-policy concepts. Regulatory laws and policies. [State by state

Energy Technology Data Exchange (ETDEWEB)

None

1980-08-01

This report is a legal study prepared to provide a review of the substantive and procedural laws of each regulatory jurisdiction that may affect implementation of the PURPA standards, and to summarize the current state of consideration and implementation of policies and rate designs similar or identical to the PURPA standards by state regulatory agencies and nonregulated utilities. This report is divided into three sections. The first section, the Introduction, summarizes the standards promulgated by PURPA and the results of the legal study. The second section, State Regulatory Law and Procedure, summarizes for each state or other ratemaking jurisdiction: (1) general constitutional and statutory provisions affecting utility rates and conditions of service; (2) specific laws or decisions affecting policy or rate design issues covered by PURPA standards; and (3) statutes and decisions governing administrative procedures, including judicial review. A chart showing actions taken on the policy and rate design issues addressed by PURPA is also included for each jurisdiction, and citations to relevant authorities are presented for each standard. State statutes or decisions that specifically define a state standard similar or identical to a PURPA standard, or that refer to one of the three PURPA objectives, are noted. The third section, Nonregulated Electric Utilities, summarizes information available on nonregulated utilities, i.e., publicly or cooperatively owned utilities which are specifically exempted from state regulation by state law.

The role of the EPA radiation quality assurance program in the measurement quality assurance accreditation program for radioassay laboratories

Energy Technology Data Exchange (ETDEWEB)

Grady, T.M. [Environmental Monitoring Systems Laboratory, Las Vegas, NV (United States)

1993-12-31

As the nature and extent of radiological contamination becomes better documented and more public, radioanalytical laboratories are faced with a constantly expanding variety of new and difficult analytical requirements. Concurrent with those requirements is the responsibility to provide customers, regulatory officials, or the public with defensible data produced in an environment of verifiable, controlled quality. To meet that need, a quality assurance accreditation program for radioassay laboratories has been proposed by the American National Standards Institute (ANSI). The standard will provide the organizational framework and functional requirements needed to assure the quality of laboratory outputs. Under the proposed program, the U.S. Environmental Protection Agency`s (EPA`s) Laboratory Intercomparison Program plays a key role as a reference laboratory. The current and proposed roles of the EPA Intercomparison Program are discussed, as are the functional relationships between EPA, the accreditating organization, and the service and monitoring laboratories.

The role of effective communications in Nuclear Regulatory Commission licensing

International Nuclear Information System (INIS)

Counsil, W.G.

1991-01-01

Communications are essential to the licensing and general regulatory program of the Nuclear Regulatory Commission. This paper attempts to identify and address certain aspects of, and approaches to, maintaining effective and efficient communications. It considers, from the perspective of the high-level radioactive waste repository program, both internal communication within the DOE itself and external communication with the Nuclear Regulatory Commission and interested parties. Many of the points presented are based on lessons learned from electric utility experience with nuclear plants

Meeting the regulatory information needs of users of radioactive materials

International Nuclear Information System (INIS)

MacDurmon, G.W.

1996-01-01

The use of radioactive materials is one of the most regulated areas of research. Researchers face ever increasing regulatory requirements and issues involving the disposal of radioactive material, while meeting the demands of higher productivity. Radiation safety programs must maximize regulatory compliance, minimize barriers, provide services and solutions, and effectively communicate with users of radioactive materials. This talk will discuss methods by which a radiation safety program can meet the needs of both the research staff and regulatory compliance staff

Meeting the regulatory information needs of users of radioactive materials

Energy Technology Data Exchange (ETDEWEB)

MacDurmon, G.W. [American Cyanamid Company, Princeton, NJ (United States)

1996-10-01

The use of radioactive materials is one of the most regulated areas of research. Researchers face ever increasing regulatory requirements and issues involving the disposal of radioactive material, while meeting the demands of higher productivity. Radiation safety programs must maximize regulatory compliance, minimize barriers, provide services and solutions, and effectively communicate with users of radioactive materials. This talk will discuss methods by which a radiation safety program can meet the needs of both the research staff and regulatory compliance staff.

NASA's Agency-Wide Strategy for Environmental Regulatory Risk Analysis and Communication

Science.gov (United States)

Scroggins, Sharon; Duda, Kristen

2008-01-01

This viewgraph presentation gives an overview of NASA's risk analysis communication programs associated with changing environmental policies. The topics include: 1) NASA Program Transition; 2) Principal Center for Regulatory Risk Analysis and Communication (RRAC PC); and 3) Regulatory Tracking and Communication Process.

Comparison of Size Modulation Standard Automated Perimetry and Conventional Standard Automated Perimetry with a 10-2 Test Program in Glaucoma Patients.

Science.gov (United States)

Hirasawa, Kazunori; Takahashi, Natsumi; Satou, Tsukasa; Kasahara, Masayuki; Matsumura, Kazuhiro; Shoji, Nobuyuki

2017-08-01

This prospective observational study compared the performance of size modulation standard automated perimetry with the Octopus 600 10-2 test program, with stimulus size modulation during testing, based on stimulus intensity and conventional standard automated perimetry, with that of the Humphrey 10-2 test program in glaucoma patients. Eighty-seven eyes of 87 glaucoma patients underwent size modulation standard automated perimetry with Dynamic strategy and conventional standard automated perimetry using the SITA standard strategy. The main outcome measures were global indices, point-wise threshold, visual defect size and depth, reliability indices, and test duration; these were compared between size modulation standard automated perimetry and conventional standard automated perimetry. Global indices and point-wise threshold values between size modulation standard automated perimetry and conventional standard automated perimetry were moderately to strongly correlated (p 33.40, p modulation standard automated perimetry than with conventional standard automated perimetry, but the visual-field defect size was smaller (p modulation-standard automated perimetry than on conventional standard automated perimetry. The reliability indices, particularly the false-negative response, of size modulation standard automated perimetry were worse than those of conventional standard automated perimetry (p modulation standard automated perimetry than with conventional standard automated perimetry (p = 0.02). Global indices and the point-wise threshold value of the two testing modalities correlated well. However, the potential of a large stimulus presented at an area with a decreased sensitivity with size modulation standard automated perimetry could underestimate the actual threshold in the 10-2 test protocol, as compared with conventional standard automated perimetry.

76 FR 78343 - HOME Investment Partnerships Program: Improving Performance and Accountability; and Updating...

Science.gov (United States)

2011-12-16

... CFR Parts 91 and 92 HOME Investment Partnerships Program: Improving Performance and Accountability... Performance and Accountability; and Updating Property Standards AGENCY: Office of the Assistant Secretary for... regulatory requirements and establish new requirements designed to enhance accountability by States and units...

A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment

Energy Technology Data Exchange (ETDEWEB)

de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg; Gopal, Anand

2013-08-01

Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using case studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.

The Canadian approach to nuclear codes and standards. A CSA forum for development of standards for CANDU: radioactive waste management and decommissioning

International Nuclear Information System (INIS)

Shin, T.; Azeez, S.; Dua, S.

2006-01-01

Together with the Canadian Standards Association (CSA), industry stakeholders, governments, and the public have developed a suite of standards for CANDU nuclear power plants that generate electricity in Canada and abroad. In this paper, we will describe: CSA's role in national and international nuclear standards development; the key issues and priority projects that the nuclear standards program has addressed; the new CSA nuclear committees and projects being established, particularly those related to waste management and decommissioning; the hierarchy of nuclear regulations, nuclear, and other standards in Canada, and how they are applied by AECL; the standards management activities; and the future trends and challenges for CSA and the nuclear community. CSA is an accredited Standards Development Organization (SDO) and part of the international standards system. CSA's Nuclear Strategic Steering Committee (NSSC) provides leadership, direction, and support for a standards committee hierarchy comprised of members from a balanced matrix of interests. The NSSC strategically focuses on industry challenges; a new nuclear regulatory system, deregulated energy markets, and industry restructuring. As the first phase of priority projects is nearing completion, the next phase of priorities is being identified. These priorities address radioactive waste management, environmental radiation management, decommissioning, structural, and seismic issues. As the CSA committees get established in the coming year, members and input will be solicited for the technical committees, subcommittees, and task forces for the following related subjects: Radioactive Waste Management; a) Dry Storage of Irradiated Fuel; b) Short-Term Radioactive Waste Management; c) Long-Term Storage and Disposal of Radioactive Waste. 2. Decommissioning Nuclear Power is highly regulated, and public scrutiny has focused Codes and Standards on public and worker safety. Licensing and regulation serves to control

47 CFR 1.1167 - Error claims related to regulatory fees.

Science.gov (United States)

2010-10-01

...) Challenges to determinations or an insufficient regulatory fee payment or delinquent fees should be made in writing. A challenge to a determination that a party is delinquent in paying a standard regulatory fee... 47 Telecommunication 1 2010-10-01 2010-10-01 false Error claims related to regulatory fees. 1.1167...

Regulatory capture in the globalisation of accounting standards

OpenAIRE

Jayne M Godfrey; Ian A Langfield-Smith

2005-01-01

The Australian Financial Reporting Council recently shocked the world business community by unexpectedly announcing a change in the nation’s approach to global-accounting-standards development. The change involved switching from ensuring consistency of Australian accounting standards with International Financial Reporting Standards (IFRSs) developed by the International Accounting Standards Board to outright adoption of IFRSs by 2005. At the time of the announcement, Australia had the most de...

State Electricity Regulatory Policy and Distributed Resources: Distributed Resource Distribution Credit Pilot Programs--Revealing the Value to Consumers and Vendors

Energy Technology Data Exchange (ETDEWEB)

Moskovitz, D.; Harrington, C.; Shirley, W.; Cowart, R.; Sedano, R.; Weston, F.

2002-10-01

Designing and implementing credit-based pilot programs for distributed resources distribution is a low-cost, low-risk opportunity to find out how these resources can help defer or avoid costly electric power system (utility grid) distribution upgrades. This report describes implementation options for deaveraged distribution credits and distributed resource development zones. Developing workable programs implementing these policies can dramatically increase the deployment of distributed resources in ways that benefit distributed resource vendors, users, and distribution utilities. This report is one in the State Electricity Regulatory Policy and Distributed Resources series developed under contract to NREL (see Annual Technical Status Report of the Regulatory Assistance Project: September 2000-September 2001, NREL/SR-560-32733). Other titles in this series are: (1) Accommodating Distributed Resources in Wholesale Markets, NREL/SR-560-32497; (2) Distributed Resources and Electric System Re liability, NREL/SR-560-32498; (3) Distribution System Cost Methodologies for Distributed Generation, NREL/SR-560-32500; (4) Distribution System Cost Methodologies for Distributed Generation Appendices, NREL/SR-560-32501.

A Standardized "Rescue" Exercise Program for Symptomatic Flare-up of Knee Osteoarthritis

DEFF Research Database (Denmark)

Bartholdy, Cecilie; Klokker, Louise; Bandak, Elisabeth

2016-01-01

the implementation of standardized rescue exercises for patients with pain exacerbations and to assess whether performing these benefit or further worsen symptoms in patients with exacerbated symptoms of knee OA. Methods The data from 2 randomized controlled studies of exercise in patients with knee OA were used......Study Design Secondary analysis of clinical trial data. Background Knee osteoarthritis (OA) management has changed significantly over recent decades toward nonpharmacological treatments, particularly exercise. However, the optimal exercise program remains to be established. Objective To describe....... A supervised, standard exercise program that included standardized "rescue" exercises to be performed in the event of symptomatic exacerbation, defined as knee pain of greater than 5 on a 0-to-10 numeric pain-rating scale, was conducted for 12 weeks at 3 sessions per week. Pain ratings were obtained before...

77 FR 39442 - Receipts-Based, Small Business Size Standard

Science.gov (United States)

2012-07-03

... RIN 3150-AJ14 [NRC-2012-0062] Receipts-Based, Small Business Size Standard AGENCY: Nuclear Regulatory... Regulatory Flexibility Act of 1980, as amended. The NRC is proposing to increase its receipts-based, small business size standard from $6.5 million to $7 million to conform to the standard set by the Small Business...

Regulatory Control of Radiation Sources. Safety Guide

International Nuclear Information System (INIS)

2009-01-01

This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

ISO/IEC 17025 laboratory accreditation of NRC Acoustical Standards Program

Science.gov (United States)

Wong, George S. K.; Wu, Lixue; Hanes, Peter; Ohm, Won-Suk

2004-05-01

Experience gained during the external accreditation of the Acoustical Standards Program at the Institute for National Measurement Standards of the National Research Council is discussed. Some highlights include the preparation of documents for calibration procedures, control documents with attention to reducing future paper work and the need to maintain documentation or paper trails to satisfy the external assessors. General recommendations will be given for laboratories that are contemplating an external audit in accordance to the requirements of ISO/IEC 17025.

Ranking system for national regulatory jurisdictions based on pesticide standard values in major exposures

Directory of Open Access Journals (Sweden)

Zijian Li

2017-07-01

Full Text Available To control the risk of human exposure to pesticides, about 50 nations have promulgated pesticide soil regulatory guidance values (RGVs, and 104 nations have provided pesticide drinking water maximum concentration levels (MCLs. In addition, 90 nations have regulated pesticide agricultural commodity maximum residue limits (MRLs. Pesticide standard values (PSVs for one single pesticide varied in a range of six, seven, or even eight orders of magnitude. Some PSVs are too large to prevent the impact of pesticides on human health. Many nations have not provided PSVs for some commonly used pesticides until now. This research has introduced several completeness values and numerical values methods to evaluate the national jurisdiction’s performance on PSVs on a nation base. The national jurisdiction ranking system developed by these methods will be beneficial to the environmental regulation makers in the management of PSVs. Results also indicate that European countries perform better in the regulation of pesticide soil RGVs, drinking water MCLs, and agricultural commodity MRLs.

Evaluation of research reactor fuel reliability in support of regulatory requirements

International Nuclear Information System (INIS)

Sokolov, Eugene N.

2005-01-01

This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

Evaluation of research reactor fuel reliability in support of regulatory requirements

Energy Technology Data Exchange (ETDEWEB)

Sokolov, Eugene N [Chalk River Laboratories, AECL, Chalk River, ON, K0J 1J0 (Canada)

2005-07-01

This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

NRC regulatory agenda

International Nuclear Information System (INIS)

1993-07-01

The NRC Regulatory Agenda is a compilation of all rules on which the NRC has recently completed action, or has proposed action, or is considering action, and all petitions for rulemaking which have been received by the Commission and are pending disposition by the Commission. The Regulatory Agenda is updated and issued each quarter. The rules on which final action has been taken since March 31, 1993 are: Repeal of NRC standards of conduct; Fitness-for-duty requirements for licensees who possess, use, or transport Category I material; Training and qualification of nuclear power plant personnel; Monitoring the effectiveness of maintenance at nuclear power plants; Licensing requirements for land disposal of radioactive wastes; and Licensees' announcements of safeguards inspections

Monitoring control program as a tool for regulatory control

International Nuclear Information System (INIS)

Silva Peres, Sueli da; Lauria, Dejanaira C.; Martins, Nadia S.F.; Rio, Monica A.P.

2008-01-01

Full text: The Institute of Radiation Protection and Dosimetry (IRD) of the Brazilian Commission of Nuclear Energy (CNEN) is responsible for developing, establishing and carrying out an independent assessment to verify the adequacy, effectiveness and accuracy of environmental radiological control carried out by licensed and controlled facilities. This independent assessment is performed by Environmental Monitoring Control Program (MCP). The MCP is a regulatory control and its main goal is to provide public and environment with an appropriate protection level against harmful effects of ionising radiation. The main purpose of the MCP is to verify whether applicable requirements prescribed by legislation are met, the environmental radiological control of the facilities are adequate and effective and the facilities are able to generate valid measuring results. The MCP is carried out in order to evaluate the quality of environmental radiation monitoring programs (EMP) and the effectiveness of their implementation, sampling conditions in the field, changes of environmental aspects in the impact area, adequacy of and adherence to procedures established and other applicable documents, technical competence of the staff and the necessary resources to ensure the required quality of the EMP. The MCP has been performed by activities should include inspecting and auditing of several types of nuclear and radioactive facilities. The inspection programme include the joint sampling program (CCP). The aim of the CCP is to check data of environmental monitoring of operator. The MCP was implemented in 1994. Ever since several problems related to the environmental control performed by operator was identified. The most important of them include problems related to the preparation and analysis of environmental samples, training of personnel, necessary resources, adherence of procedures to the purpose of the monitoring, fulfillment of procedures established, adequacy of the EMP and EMP

Defining Tobacco Regulatory Science Competencies.

Science.gov (United States)

Wipfli, Heather L; Berman, Micah; Hanson, Kacey; Kelder, Steven; Solis, Amy; Villanti, Andrea C; Ribeiro, Carla M P; Meissner, Helen I; Anderson, Roger

2017-02-01

In 2013, the National Institutes of Health and the Food and Drug Administration funded a network of 14 Tobacco Centers of Regulatory Science (TCORS) with a mission that included research and training. A cross-TCORS Panel was established to define tobacco regulatory science (TRS) competencies to help harmonize and guide their emerging educational programs. The purpose of this paper is to describe the Panel's work to develop core TRS domains and competencies. The Panel developed the list of domains and competencies using a semistructured Delphi method divided into four phases occurring between November 2013 and August 2015. The final proposed list included a total of 51 competencies across six core domains and 28 competencies across five specialized domains. There is a need for continued discussion to establish the utility of the proposed set of competencies for emerging TRS curricula and to identify the best strategies for incorporating these competencies into TRS training programs. Given the field's broad multidisciplinary nature, further experience is needed to refine the core domains that should be covered in TRS training programs versus knowledge obtained in more specialized programs. Regulatory science to inform the regulation of tobacco products is an emerging field. The paper provides an initial list of core and specialized domains and competencies to be used in developing curricula for new and emerging training programs aimed at preparing a new cohort of scientists to conduct critical TRS research. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

USNRC regulatory guidance for engineered safety feature air cleaning systems

International Nuclear Information System (INIS)

Bellamy, R.R.

1991-01-01

The need for clear, technically appropriate, and easily implementable guidance for the design, testing, and maintenance of nuclear air cleaning systems has long been recognized. Numerous industry consensus standards have been issued and revised over the last 30 years. Guidance has also been published by the US Nuclear Regulatory Commission in the form of regulations, regulatory guides, standard review plans, NUREG documents, and information notices. This paper will summarize the latest revisions to these documents and emphasize Regulatory Guide 1.52, Design, Testing, and Maintenance Criteria for Post-Accident Engineered-Safety-Feature Atmosphere Cleanup System Air Filtration and Adsorption Units of Light-Water-Cooled Nuclear Power Plants, which was last revised in 1978. The USNRC has undertaken a project to revise this regulatory guide, and the status of that revision is highlighted

Bruce Power's nuclear pressure boundary quality assurance program requirements, implementation and transition

International Nuclear Information System (INIS)

Krane, J.C.

2009-01-01

The development of a full scope nuclear pressure boundary quality assurance program in Canada requires extensive knowledge of the structure and detailed requirements of codes and standards published by the Canadian Standards Association (CSA) and American Society of Mechanical Engineers (ASME). Incorporation into company governance documents and implementation of these requirements while managing the transition to more recent revisions of these codes and standards represents a significant challenge for Bruce Power, Canada's largest independent nuclear operator. This paper explores the key developments and innovative changes that are used to ensure successful regulatory compliance and effective implementation of the Bruce Power Pressure Boundary Quality Assurance Program. Challenges and mitigating strategies to sustain this large compliance based program at Bruce Power's 8 unit nuclear power plant site will also be detailed. (author)

Evaluation of Public Service Electric & Gas Company`s standard offer program, Volume I

Energy Technology Data Exchange (ETDEWEB)

Goldman, C.A.; Kito, M.S.; Moezzi, M.M.

1995-07-01

In May 1993, Public Service Electric and Gas (PSE&G), the largest investor-owned utility in New Jersey, initiated the Standard Offer program, an innovative approach to acquiring demand-side management (DSM) resources. In this program, PSE&G offers longterm contracts with standard terms and conditions to project sponsors, either customers or third-party energy service companies (ESCOs), on a first-come, first-serve basis to fill a resource block. The design includes posted, time-differentiated prices which are paid for energy savings that will be verified over the contract term (5, 10, or 15 years) based on a statewide measurement and verification (M&V) protocol. The design of the Standard Offer differs significantly from DSM bidding programs in several respects. The eligibility requirements and posted prices allow ESCOs and other energy service providers to market and develop projects among customers with few constraints on acceptable end use efficiency technologies. In contrast, in DSM bidding, ESCOs typically submit bids without final commitments from customers and the utility selects a limited number of winning bidders who often agree to deliver a pre-specified mix of savings from various end uses in targeted markets. The major objectives of the LBNL evaluation were to assess market response and customer satisfaction; analyze program costs and cost-effectiveness; review and evaluate the utility`s administration and delivery of the program; examine the role of PSE&G`s energy services subsidiary (PSCRC) in the program and the effect of its involvement on the development of the energy services industry in New Jersey; and discuss the potential applicability of the Standard Offer concept given current trends in the electricity industry (i.e., increasing competition and the prospect of industry restructuring).

Employee Perceptions of Workplace Health Promotion Programs: Comparison of a Tailored, Semi-Tailored, and Standardized Approach.

Science.gov (United States)

Street, Tamara D; Lacey, Sarah J

2018-04-28

In the design of workplace health promotion programs (WHPPs), employee perceptions represent an integral variable which is predicted to translate into rate of user engagement (i.e., participation) and program loyalty. This study evaluated employee perceptions of three workplace health programs promoting nutritional consumption and physical activity. Programs included: (1) an individually tailored consultation with an exercise physiologist and dietitian; (2) a semi-tailored 12-week SMS health message program; and (3) a standardized group workshop delivered by an expert. Participating employees from a transport company completed program evaluation surveys rating the overall program, affect, and utility of: consultations ( n = 19); SMS program ( n = 234); and workshops ( n = 86). Overall, participants’ affect and utility evaluations were positive for all programs, with the greatest satisfaction being reported in the tailored individual consultation and standardized group workshop conditions. Furthermore, mode of delivery and the physical presence of an expert health practitioner was more influential than the degree to which the information was tailored to the individual. Thus, the synergy in ratings between individually tailored consultations and standardized group workshops indicates that low-cost delivery health programs may be as appealing to employees as tailored, and comparatively high-cost, program options.

Hanford Environmental Management Program implementation plan

International Nuclear Information System (INIS)

1988-08-01

The Hanford Environmental Management Program (HEMP) was established to facilitate compliance with the applicable environmental statues, regulations, and standards on the Hanford Site. The HEMP provides a structured approach to achieve environmental management objectives. The Hanford Environmental Management Program Plan (HEMP Plan) was prepared as a strategic level planning document to describe the program management, technical implementation, verification, and communications activities that guide the HEMP. Four basic program objectives are identified in the HEMP Plan as follows: establish ongoing monitoring to ensure that Hanford Site operations comply with environmental requirements; attain regulatory compliance through the modification of activities; mitigate any environmental consequences; and minimize the environmental impacts of future operations at the Hanford Site. 2 refs., 24 figs., 27 tabs

Review of regulatory requirements relevant to calibration of monitoring instruments in research reactors

Energy Technology Data Exchange (ETDEWEB)

Gomaa, Hassan; Khedr, Ahmed; El-Din Talha, Kamal [Egyptian Nuclear and Radiological Regulatory Authority, Cairo (Egypt). Nuclear Safety Engineering Dept.

2015-05-15

The objective of this work is to demonstrate the regulatory requirements pertaining to calibration of monitoring instruments in research reactors. The regulatory statements concerning this subject in IAEA safety standards and the implementation of such regulations in twelve countries with different levels of nuclear programs are surveyed: Australia, Bulgaria, Canada, Egypt, Finland, Germany, Hungary, Slovenia, South Korea, Spain, United Kingdom of England and United States of America. In addition, the requirements of ISO/IEC17025 and NUPIC (Nuclear Utilities Procurement Issues Committee) are compared. Seven technical and administrate aspects are suggested as the comparison criteria and the explicit expression of the statements, the level of document (i.e.: act, requirement or guide) are the considered resources. The main differences and similarities between the different approaches are identified in order to provide an input for future development of the national regulations.

Projected Standard on neutron skyshine

International Nuclear Information System (INIS)

Westfall, R.M.; Williams, D.S.

1987-07-01

Current interest in neutron skyshine arises from the application of dry fuel handling and storage techniques at reactor sites, at the proposed monitored retrievable storage facility and at other facilities being considered as part of the civilian radioactive waste management programs. The chairman of Standards Subcommittee ANS-6, Radiation Protection and Shielding, has requested that a work group be formed to characterize the neutron skyshine problem and, if necessary, prepare a draft Standard. The work group is comprised of representatives of storage cask vendors, architect engineering firms, nuclear utilities, the academic community and staff members of national laboratories and government agencies. The purpose of this presentation summary is to describe the activities of the work group and the scope and contents of the projected Standard, ANS-6.6.2, ''Calculation and Measurement of Direct and Scattered Neutron Radiation from Nuclear Power Operations.'' The specific source under consideration by the work group is an array of dry fuel casks located at a reactor site. However, it is recognized that the scope of the standard should be broad enough to encompass other neutron sources. The Standard will define appropriate methodology for properly characterizing the neutron dose due to skyshine. This dose characterization is necessary, for example, in demonstrating compliance with pertinent regulatory criteria

The dynamics of the transnational food chain regulatory governance

DEFF Research Database (Denmark)

Chatzopoulou, Sevasti

2015-01-01

dynamics of the interactions among public and private actors operate within the transnational food standards setting process. The study identifies the groups of interdependent actors (public and private) that interact within the transnational food chain regulatory process and develop public...... in detail how these interactions operate empirically on specific regulations. Practical implications – The paper offers an integrative thorough understanding of the food chain regulatory standard setting process, relevant for academics, policy makers, the industry, and society. Originality/value – The paper...

Immobilization of defense high-level waste: an assessment of technological strategies and potential regulatory goals. Volume I

International Nuclear Information System (INIS)

1979-06-01

An investigation was made of the high-level radioactive waste immobilization technology programs in the U.S. and Europe, and of the associated regulatory programs and waste management perspectives in the countries studied. Purpose was to assess the ability of those programs to satisfy DOE waste management needs and U.S. regulatory requirements. This volume includes: introduction, immobilization strategies in the context of waste isolation program needs, high-level waste management as an integrated system, regulatory goals, engineered-barrier characteristics, barrier technology, high-level waste disposal programs, analysis of HLW immobilization technology in the context of policy and regulatory requirements, and waste immobilization program option

FORECAST: Regulatory effects cost analysis software annual

International Nuclear Information System (INIS)

Lopez, B.; Sciacca, F.W.

1991-11-01

Over the past several years the NRC has developed a generic cost methodology for the quantification of cost/economic impacts associated with a wide range of new or revised regulatory requirements. This methodology has been developed to aid the NRC in preparing Regulatory Impact Analyses (RIAs). These generic costing methods can be useful in quantifying impacts both to industry and to the NRC. The FORECAST program was developed to facilitate the use of the generic costing methodology. This PC program integrates the major cost considerations that may be required because of a regulatory change. FORECAST automates much of the calculations typically needed in an RIA and thus reduces the time and labor required to perform these analysis. More importantly, its integrated and consistent treatment of the different cost elements should help assure comprehensiveness, uniformity, and accuracy in the preparation of needed cost estimates

Regulatory approach of the monitoring the effectiveness of maintenance at nuclear power plants program; Abordagem regulatoria do programa de monitoracao da eficacia da manutencao para usinas nucleoeletricas

Energy Technology Data Exchange (ETDEWEB)

Vajgel, Stefan

2009-03-15

The electrical power generation using nuclear power plants requires this installation being safety, reliable and available for the working periods. For this purpose, an adequate, effective and well conducted maintenance program makes an essential and useful tool to the owner of the plant. However, it is necessary to follow the regulatory requirements for this program implementation which monitories this maintenance effectiveness. There are Brazilian norms requirements which must be followed. The international regulatory guides establish these requirements in good details but it is necessary to verify if this methodology for implementing can be totally applied here in Brazil. Then, the american guide NUMARC 93-01 which details how can be implemented a program for this monitoring, shows some methods for using. In this thesis, the Delphi and Probabilistic Safety Analysis were briefly included because they were preferred for implementing this monitoring.in a Brazilian plant. The results which are being obtained show that, looking the regulatory aspects, the NUMARC 93-01 follows our regulations and gives good results for the plant management. (author)

Views of surgery program directors on the current ACGME and proposed IOM duty-hour standards.

Science.gov (United States)

Willis, Ross E; Coverdill, James E; Mellinger, John D; Collins, J Craig; Potts, John R; Dent, Daniel L

2009-01-01

The purpose of this study was to survey the experiences of surgery program directors with the current Accreditation Council for Graduate Medical Education (ACGME) duty-hour standards and views of the Institute of Medicine (IOM) proposed duty-hour recommendations. A total of 118 program directors (47.6% of all surgery programs in the US) responded to the survey. Results showed that the current duty-hour standards have hindered clinical education opportunities by reducing or eliminating rotations on many services, didactic teaching conferences, and clinical bedside teaching opportunities. Additionally, patient safety has been compromised by frequent hand offs of care. Most IOM recommendations were perceived as extremely difficult or impossible to implement, with the exception of the moonlighting recommendation. The results indicated that adopting the IOM recommendations is not feasible given current workforce limitations, and most program directors supported maintaining the current duty-hour standards until such time as there is evidence-based outcomes research to direct change. The conclusion was that the current ACGME duty-hour standards have reduced teaching opportunities and narrowed the scope of training.

Evaluation of a draft standard on performance specifications for health physics instrumentation - program overview

International Nuclear Information System (INIS)

Kathren, R.L.; Selby, J.M.; Kenoyer, J.L.; Swinth, K.L.

1983-01-01

The draft ANSI Standard N42.17 on performance specifications for health physics instrumentation was written in 1981 by a task group that included both manufacturers and users of these instruments as well as representation from the regulatory bodies; the second draft of this standard is currently being evaluated by Pacific Northwest Laboratory. Objectives of this project include the evaluation of the applicability and practicality of the proposed standard and the determination of the degree of conformance of a cross-section of currently available commercial instruments to the proposed standard. This standard is being tested against such instruments as ionization chambers. G.M. detectors, alpha survey meters, and neutron dose equivalent survey meters. Radiological, electrical, mechanical, safety, and environmental performance criteria are specified and tests to evaluate conformance are detailed. Specific criteria which are discussed in this draft standard include inspection tests (e.g., readout units, scaling and zero set, decontamination, moisture protection, alarm threshold, battery status indication), AC and battery power requirements, alarm reset, stability, geotropism, response time, accuracy, precision, IER, beta, and neutron energy dependence, radiation overloads, angular dependence, extracameral response, nonionizing electromagnetic radiations, magnetic fields, interfering ionizing radiations, and effect of temperature, humidity, ambient pressure, shock, and vibration. The testing procedures were developed with emphasis on the requirements found in ANSI N42.17 with additional criteria from other draft and current ANSI and IEC standards

Virginia power nuclear power station engineer training program

International Nuclear Information System (INIS)

Williams, T.M.; Haberstroh-Timpano, S.

1987-01-01

In response to the Institute of Nuclear Power Operations (INPO) accreditation requirements for technical staff and manager, Virginia Power developed the Nuclear Power Station Engineer Training Programs (NPSETP). The NPSETP is directed toward enhancing the specific knowledge and skills of company engineers, especially newly hired engineers. The specific goals of the program are to promote safe and reliable plant operation by providing engineers and appropriate engineering technicians with (1) station-specific basic skills; (2) station-specific specialized skills in the areas of surveillance and test, plant engineering, nuclear safety, and in-service inspection. The training is designed to develop, maintain, and document through demonstration the required knowledge and skills of the engineers in the identified groups at North Anna and Surry Power Stations. The program responds to American National Standards Institute, INPO, and US Nuclear Regulatory Commission standards

Functional and topological characteristics of mammalian regulatory domains

Science.gov (United States)

Symmons, Orsolya; Uslu, Veli Vural; Tsujimura, Taro; Ruf, Sandra; Nassari, Sonya; Schwarzer, Wibke; Ettwiller, Laurence; Spitz, François

2014-01-01

Long-range regulatory interactions play an important role in shaping gene-expression programs. However, the genomic features that organize these activities are still poorly characterized. We conducted a large operational analysis to chart the distribution of gene regulatory activities along the mouse genome, using hundreds of insertions of a regulatory sensor. We found that enhancers distribute their activities along broad regions and not in a gene-centric manner, defining large regulatory domains. Remarkably, these domains correlate strongly with the recently described TADs, which partition the genome into distinct self-interacting blocks. Different features, including specific repeats and CTCF-binding sites, correlate with the transition zones separating regulatory domains, and may help to further organize promiscuously distributed regulatory influences within large domains. These findings support a model of genomic organization where TADs confine regulatory activities to specific but large regulatory domains, contributing to the establishment of specific gene expression profiles. PMID:24398455

75 FR 1830 - Final Regulatory Guide: Issuance, Availability

Science.gov (United States)

2010-01-13

... (RG) 5.71, ``Cyber Security Programs for Nuclear Facilities.'' FOR FURTHER INFORMATION CONTACT: Karl J... review of applications for permits and licenses. RG 5.71, ``Cyber Security Programs for Nuclear... Nuclear Regulatory Research concerning cyber security program development and the collective body of...

Piping research program plan

International Nuclear Information System (INIS)

1988-09-01

This document presents the piping research program plan for the Structural and Seismic Engineering Branch and the Materials Engineering Branch of the Division of Engineering, Office of Nuclear Regulatory Research. The plan describes the research to be performed in the areas of piping design criteria, environmentally assisted cracking, pipe fracture, and leak detection and leak rate estimation. The piping research program addresses the regulatory issues regarding piping design and piping integrity facing the NRC today and in the foreseeable future. The plan discusses the regulatory issues and needs for the research, the objectives, key aspects, and schedule for each research project, or group of projects focussing of a specific topic, and, finally, the integration of the research areas into the regulatory process is described. The plan presents a snap-shot of the piping research program as it exists today. However, the program plan will change as the regulatory issues and needs change. Consequently, this document will be revised on a bi-annual basis to reflect the changes in the piping research program. (author)

77 FR 10997 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction

Science.gov (United States)

2012-02-24

... Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction AGENCY: Office of... standards for distribution transformers. It was recently discovered that values in certain tables of the...,'' including distribution transformers. The Energy Policy Act of 1992 (EPACT 1992), Public Law 102-486, amended...

Technical Standards for Nursing Education Programs in the 21st Century.

Science.gov (United States)

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

Science.gov (United States)

2010-04-05

... Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction AGENCY: Office of... standards for small electric motors, which was published on March 9, 2010. In that final rule, the U.S... titled ``Energy Conservation Standards for Small Electric Motors.'' 75 FR 10874. Since the publication of...

Position paper on standardization

International Nuclear Information System (INIS)

1991-04-01

The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

Challenges and opportunities in establishing scientific and regulatory standards for determining therapeutic equivalence of modified-release products: Workshop summary report.

Science.gov (United States)

Chen, Mei-Ling; Shah, Vinod P; Ganes, Derek; Midha, Kamal K; Caro, James; Nambiar, Prabu; Rocci, Mario L; Thombre, Avinash G; Abrahamsson, Bertil; Conner, Dale; Davit, Barbara; Fackler, Paul; Farrell, Colm; Gupta, Suneel; Katz, Russell; Mehta, Mehul; Preskorn, Sheldon H; Sanderink, Gerard; Stavchansky, Salomon; Temple, Robert; Wang, Yaning; Winkle, Helen; Yu, Lawrence

2010-09-01

Modified-release (MR) products are complex dosage forms designed to release drug in a controlled manner to achieve the desired efficacy and safety profiles. Inappropriate control of drug release from such products may result in reduced efficacy or increased toxicity. This paper is a summary report of the American Association of Pharmaceutical Scientists, International Pharmaceutical Federation, and Product Quality Research Institute workshop titled "Challenges and Opportunities in Establishing Scientific and Regulatory Standards for Assuring Therapeutic Equivalence of Modified Release Products", held October 1-2, 2009, in Baltimore, Maryland. The workshop provided an opportunity for pharmaceutical scientists from academia, industry, and regulatory agencies to discuss current regulatory expectations and industry practices for evaluating the pharmaceutical equivalence and bioequivalence of oral MR products. In the case of conventional monophasic MR formulations, the current regulatory approaches and criteria for bioequivalence evaluation were considered adequate for the assessment of therapeutic equivalence and inter-changeability of drug products. Additional measures may occasionally be needed to determine the bioequivalence of multiphasic MR products. The metric of partial AUC proposed by the US Food and Drug Administration received broad support as an additional measure for evaluating bioequivalence of multiphasic MR products designed to have a rapid onset of drug action followed by sustained response. The cutoff for partial AUCs may be based on the pharmacokinetic/pharmacodynamic or pharmacokinetic/ response characteristics of the products under examination. If the new metric is highly variable, the bioequivalence limits may be set based on the known within-subject variability for the reference product. The current regulatory approaches and criteria for bioequivalence evaluation were considered adequate for the assessment of therapeutic equivalence and

Do School-Based Tutoring Programs Significantly Improve Student Performance on Standardized Tests?

Science.gov (United States)

Rothman, Terri; Henderson, Mary

2011-01-01

This study used a pre-post, nonequivalent control group design to examine the impact of an in-district, after-school tutoring program on eighth grade students' standardized test scores in language arts and mathematics. Students who had scored in the near-passing range on either the language arts or mathematics aspect of a standardized test at the…

Continuous improvement of the regulatory framework for the control of medical exposure

International Nuclear Information System (INIS)

Larcher, Ana M.; Ortiz Lopez, Pedro; Arias, Cesar; Marechal, Maria H.; Hernandez Alvarez, Ramon; Ferrer Garcia, Natividad; Castaneda Mucino, Antonia; Faller, Blanca

2008-01-01

One of the key elements to guide the improvement of the regulatory control is the availability of a self-assessment tool for regulatory performance. Although there is general guidance on self-assessment for regulators and users (IAEA), there is a need for more specific advice on how to address challenges and difficulties faced by regulatory bodies, when regulating radiation protection of patients. Examples of these challenges are the need for regulatory initiatives, in cooperation with health and education authorities, professional bodies and equipment suppliers, and to put in place necessary elements that are beyond responsibility of individual user of radiation, to enable them compliance with safety standards. Purpose: Within the programme of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, a project to develop such a self-assessment tool for the regulatory control of medical exposure has been designed. Method: National experiences in transposing and enforcing the international radiation safety standards, as to how the requirements are included in national regulations are reviewed. Further, difficulties to the implementation of safety requirements are analyzed and a self-assessment approach and possible regulatory solutions a are presented. Results and discussion: In this study the following documents are being produced: 1) transposition of international requirements into national regulations in the six countries of the Forum, 2) difficulties to implement and enforce the requirements, 3) guidance on self-assessment of regulatory framework for medical exposure, 4) suggested contribution to the revision of international radiation safety standards. (author)

Regulatory analysis technical evaluation handbook. Final report

International Nuclear Information System (INIS)

1997-01-01

The purpose of this Handbook is to provide guidance to the regulatory analyst to promote preparation of quality regulatory analysis documents and to implement the policies of the Regulatory Analysis Guidelines of the US Nuclear Regulatory Commission (NUREG/BR-0058 Rev. 2). This Handbook expands upon policy concepts included in the NRC Guidelines and translates the six steps in preparing regulatory analyses into implementable methodologies for the analyst. It provides standardized methods of preparation and presentation of regulatory analyses, with the inclusion of input that will satisfy all backfit requirements and requirements of NRC's Committee to Review Generic Requirements. Information on the objectives of the safety goal evaluation process and potential data sources for preparing a safety goal evaluation is also included. Consistent application of the methods provided here will result in more directly comparable analyses, thus aiding decision-makers in evaluating and comparing various regulatory actions. The handbook is being issued in loose-leaf format to facilitate revisions. NRC intends to periodically revise the handbook as new and improved guidance, data, and methods become available

SCINFI II A program to calculate the standardization curve in liquid scintillation counting

Energy Technology Data Exchange (ETDEWEB)

Grau Carles, A.; Grau Malonda, A.

1985-07-01

A code, SCINFI II, written in BASIC, has been developed to compute the efficiency-quench standardization curve for any beta radionuclide. The free parameter method has been applied. The program requires the standardization curve for 3{sup H} and the polynomial or tabulated relating counting efficiency as figure of merit for both 3{sup H} and the problem radionuclide. The program is applied to the computation, of the counting efficiency for different values of quench when the problem is 14{sup C}. The results of four different computation methods are compared. (Author) 17 refs.

SCINFI II A program to calculate the standardization curve in liquid scintillation counting

International Nuclear Information System (INIS)

Grau Carles, A.; Grau Malonda, A.

1985-01-01

A code, SCINFI II, written in BASIC, has been developed to compute the efficiency-quench standardization curve for any beta radionuclide. The free parameter method has been applied. The program requires the standardization curve for 3 H and the polynomial or tabulated relating counting efficiency as figure of merit for both 3 H and the problem radionuclide. The program is applied to the computation, of the counting efficiency for different values of quench when the problem is 14 C . The results of four different computation methods are compared. (Author) 17 refs

Implementing 'Continuous Improvement' in the U.S. Nuclear Regulatory Commission's Decommissioning Program

International Nuclear Information System (INIS)

Orlando, D. A.; Buckley, J. T.; Johnson, R. L.; Gillen, D. M.

2006-01-01

The United States Nuclear Regulatory Commission's (US NRC's) comprehensive decommissioning program encompasses the decommissioning of all US NRC licensed facilities, ranging from the termination of routine licenses for sealed sources, to the closure of complex materials sites and nuclear power reactor facilities. Of the approximately 200 materials licenses that are terminated each year, most are routine and require little, if any, remediation to meet the US NRC unrestricted release criteria. However, some present technical and policy challenges that require large expenditures of resources, including a few complex materials sites that have requested license termination under the restricted-use provisions of 10 CFR 20.1403. Fiscal constraints to reduce budgeted resources in the decommissioning program, as well as concerns over the time to complete the decommissioning process have led to actions to improve the program and use resources more efficiently. In addition, the US NRC's Strategic Plan requires efforts to identify and implement improvements to US NRC programs in order to improve efficiency, effectiveness, timeliness, and openness, of the US NRC's activities, while maintaining the necessary focus on safety. Decommissioning regulations, and more recently the analysis of several issues associated with implementing those regulations, also have been significant catalysts for improvements in the decommissioning program. Actions in response to these catalysts have resulted in a program focused on the management of complex sites in a comprehensive, consistent, and risk-informed manner, as opposed to the past practice of focusing on sites deemed to be problematic. This paper describes the current status of the decommissioning of US NRC-licensed nuclear facilities, including an overview of recent decommissioning project completion efforts. It provides a detailed summary of past, current, and future improvements in the US NRC decommissioning program including the

Regulatory acceptance of the proposed well abandonment program for the present landfill, Operable Unit 7, Rocky Flats Environmental Technology Site, Golden, Colorado

International Nuclear Information System (INIS)

Wood, M.R.

1995-01-01

The regulatory agencies approved a well abandonment program for the Present Landfill, Operable Unit (OU) 7 at the Rocky Flats Environmental Technology Site, only three months after preparation. The proposed well abandonment program consists of abandoning 26 of the 54 existing monitoring wells in OU 7 that are currently sampled quarterly as Resource Conservation and Recovery Act (RCRA) compliance wells or sitewide groundwater protection wells. Well abandonment was proposed on the basis that the purpose of each well has been fulfilled, the wells fall under the footprint of the landfill cap, the presence of the wells would compromise the integrity of the cap because holes would have to be cut in the synthetic liner, and unequal compaction of the fill material around the wells would potentially cause differential settlement of the cap. The proposal provided the technical justification to abandon the wells in place. The timely approval of the proposal by the regulatory agencies will allow the abandonment of the wells during fiscal year 1995 under the sitewide Well Abandonment and Replacement Program (WARP). Cost savings resulting from a decrease in the number of wells to be sampled under the groundwater monitoring program are estimated at $416,000 per year. This paper presents a summary of the well abandonment program, discusses the timely approvals required for implementation, and present the potential cost savings that can be achieved through implementation of the program

77 FR 8020 - Semiannual Regulatory Agenda

Science.gov (United States)

2012-02-13

... (Reg Plan Seq No. 148). 452 Small Business Innovation 3245-AF84 Research (SBIR) Program Policy... Business Innovation Research (SBIR) Program Policy Directive Regulatory Plan: This entry is Seq. No. 149 in... proposal for a contract and that if the percentage is not met, the large business prime contractor must...

78 FR 38739 - Standard Format and Content for Post-Shutdown Decommissioning Activities Report

Science.gov (United States)

2013-06-27

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0299] Standard Format and Content for Post-Shutdown Decommissioning Activities Report AGENCY: Nuclear Regulatory Commission. ACTION: Regulatory guide; issuance..., ``Standard Format and Content for Post-shutdown Decommissioning Activities Report.'' This guide describes a...

Reactor safety research program. A description of current and planned reactor safety research sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research

International Nuclear Information System (INIS)

1975-06-01

The reactor safety research program, sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research, is described in terms of its program objectives, current status, and future plans. Elements of safety research work applicable to water reactors, fast reactors, and gas cooled reactors are presented together with brief descriptions of current and planned test facilities. (U.S.)

Regulatory system reform of occupational health and safety in China.

Science.gov (United States)

Wu, Fenghong; Chi, Yan

2015-01-01

With the explosive economic growth and social development, China's regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined.

Design of Standards and Labeling programs in Chile: Techno-Economic Analysis for Refrigerators

Energy Technology Data Exchange (ETDEWEB)

Letschert, Virginie E. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; McNeil, Michael A. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; Pavon, Mariana [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; Lutz, Wolfgang F. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.

2013-05-01

Lawrence Berkeley National Laboratory is a global leader in the study of energy efficiency and its effective implementation through government policy. The Energy Analysis and Environmental Impacts Department of LBNL’s Environmental Energy Technologies Division provides technical assistance to help federal, stat e and local government agencies in the United States, and throughout the world, develop long-term strategies, policy, and programs to encourage energy efficiency in all sectors and industries. In the past, LBNL has assisted staff of various countries government agencies and their con tractors in providing methodologies to analyze cost-effectiveness of regulations and asses s overall national impacts of efficiency programs. The paper presents the work done in collaboration with the Ministry of Energy (MoE) in Chile and the Collaborative Labeling Appliance Standards Programs (CLASP) on designing a Minimum Energy Performance Standards (MEPS) and ext ending the current labeling program for refrigerators.

24 CFR 200.947 - Building product standards and certification program for polystyrene foam insulation board.

Science.gov (United States)

2010-04-01

... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.947 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards and the type of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

Alternatives to animal experimentation: The regulatory background

International Nuclear Information System (INIS)

Garthoff, Bernward

2005-01-01

The framework, in which alternatives to animal experiments can be developed, standardized, respectively formally validated, has to be seen in a global context. The ever increasing demand of testing for hazard and risk assessment in health and environment, exemplified by the EU REACH program, subsequently triggers laboratory animal testing. This holds especially true, if no valid alternative methods agreed to by the regulatory authorities and the scientific community are available. At least for regulatory toxicity testing, the global frame and network are given by institutions such as OECD, ICH, and alike. However, due to the necessity of global consent of states, organizations, and stakeholders, the time gap between availability of a novel alternative test method and its final acceptance by authorities and implementation thereafter is widening. The lack of new technologies or opportunities for alternative method application such as, for example, the broad use of transgenic animals for refinement of existing tests, adds to the problem. The bare existence of certain in vivo tests increases also the gap between public demands for testing versus availability of alternative tests. Industries operating on a worldwide basis support the alternative test development in their respective area of research and operational business. However, a more coordinating approach such as that of the ecopa-organization (European Consensus Platform on Alternatives) is needed to exploit the existing possibilities within the current regulatory framework. This will speed up the process of acceptance and challenge the political worldto feel responsible for the sequels of their demanding more testing, that is, by funding alternative method development in academia and industry

13 CFR 108.585 - Voluntary decrease in NMVC Company's Regulatory Capital.

Science.gov (United States)

2010-01-01

...'s Regulatory Capital. 108.585 Section 108.585 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Managing the Operations of a NMVC Company Voluntary Decrease in Regulatory Capital § 108.585 Voluntary decrease in NMVC Company's Regulatory Capital. You must...

NAGC Pre-K-Grade 12 Gifted Education Programming Standards: A Guide to Planning and Implementing High-Quality Services

Science.gov (United States)

Johnsen, Susan K., Ed.

2012-01-01

The new Pre-K-Grade 12 Gifted Education Programming Standards should be part of every school district's repertoire of standards to ensure that the learning needs of advanced students are being met. "NAGC Pre-K-Grade 12 Gifted Education Programming Standards: A Guide to Planning and Implementing High-Quality Services" details six standards that…

Regulatory agencies and regulatory risk

OpenAIRE

Knieps, Günter; Weiß, Hans-Jörg

2008-01-01

The aim of this paper is to show that regulatory risk is due to the discretionary behaviour of regulatory agencies, caused by a too extensive regulatory mandate provided by the legislator. The normative point of reference and a behavioural model of regulatory agencies based on the positive theory of regulation are presented. Regulatory risk with regard to the future behaviour of regulatory agencies is modelled as the consequence of the ex ante uncertainty about the relative influence of inter...

MDEP Technical Report TR-CSWG-01. Technical Report: Regulatory Frameworks for the Use of Nuclear Pressure Boundary Codes and Standards in MDEP Countries

International Nuclear Information System (INIS)

2013-01-01

The Codes and Standards Working Group (CSWG) is one of the issue-specific working groups that the MDEP members are undertaking; its long term goal is harmonisation of regulatory and code requirements for design and construction of pressure-retaining components in order to improve the effectiveness and efficiency of the regulatory design reviews, increase quality of safety assessments, and to enable each regulator to become stronger in its ability to make safety decisions. The CSWG has interacted closely with the Standards Development Organisations (SDOs) and CORDEL in code comparison and code convergence. The Code Comparison Report STP-NU-051 has been issued by SDO members to identify the extent of similarities and differences amongst the pressure-boundary codes and standards used in various countries. Besides the differences in codes and standards, the way how the codes and standards are applied to systems, structures and components also affects the design and construction of nuclear power plant. Therefore, to accomplish the goal of potential harmonisation, it is also vital that the regulators learn about each other's procedures, processes, and regulations. To facilitate the learning process, the CSWG meets regularly to discuss issues relevant to licensing new reactors and using codes and standards in licensing safety reviews. The CSWG communicates very frequently with the SDOs to discuss similarities and differences among the various codes and how to proceed with potential harmonisation. It should be noted that the IAEA is invited to all of the issue-specific working groups within MDEP to ensure consistency with IAEA standards. The primary focus of this technical report is to consolidate information shared and accomplishments achieved by the member countries. This report seeks to document how each MDEP regulator utilises national or regional mechanical codes and standards in its safety reviews and licensing of new reactors. The preparation of this report

Regulatory issues associated with the Multi-Purpose (MPC) system

International Nuclear Information System (INIS)

Roberts, J.P.; Desell, L.J.; Birch, M.L.; Morgan, R.G.

1994-01-01

The US Department of Energy Office of Civilian Radioactive Waste Management is developing a Multi-Purpose Canister system to promote compatibility between the waste program elements of storage, transportation, and disposal. The development of a Multi-Purpose Canister system requires meeting various regulatory requirements. These regulatory requirements are set forth in environmental and Nuclear Regulatory Commission (NRC) regulations. This paper discusses the more significant regulatory issues that must be addressed in the development of a Multi-Purpose Canister system by the Department of Energy

Preparation of safety regulatory requirements for new technology like digital system

International Nuclear Information System (INIS)

2012-01-01

The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following two general common positions are discussed and to be issued in this fiscal year. Verification and Validation throughout the life cycle of safety systems using digital computers. The Impact of Cyber Security Features on Digital I and C Safety Systems. (author)

Integrated Regulatory Review Service (IRRS) Guidelines for the Preparation and Conduct of IRRS Missions

International Nuclear Information System (INIS)

2013-01-01

The IAEA Integrated Regulatory Review Service (IRRS) was established to strengthen and enhance the effectiveness of national regulatory infrastructure for nuclear safety, radiation safety, radioactive waste and transport safety, and the security of radioactive sources, while recognizing the ultimate responsibility of each Member State to ensure safety in these areas. The IRRS process sets out to accomplish this expressed purpose through consideration of both technical and policy issues of a regulatory nature against IAEA safety standards and, where appropriate, good practice elsewhere. The regulatory review process directly draws upon the wide-ranging international experience and expertise of IRRS review team members. Peer exchange on technical and policy issues gives insight into the efficiency and effectiveness of the legal and governmental framework and regulatory infrastructure for safety. Through this process, opportunities for improvement are explored and potential improvement strategies identified which may be shared with other States. IRRS missions provide an opportunity for sharing regulatory experiences, harmonizing regulatory approaches among States, and creating mutual learning opportunities among regulators. IRRS discussions focus on issues arising from the State's self-assessment and the evaluation of technical areas and policy issues. The IAEA Fundamental Safety Principles (IAEA Safety Standards Series No. SF-1) provide the basis for IAEA safety standards and IAEA safety related programmes. In support of effective regulation, the IAEA has established safety standards in the area of the Governmental, Legal and Regulatory Framework for Safety (IAEA Safety Standards Series No. GSR Part 1). These safety standards form a core component of an IRRS review. Other requirements and guidance, such as The Management System for Facilities and Activities (IAEA Safety Standards Series No. GS-R-3) and Radiation Protection and Safety of Radiation Sources

Categorization and selection of regulatory approaches for nuclear power plants

International Nuclear Information System (INIS)

Sugaya, Junko; Harayama, Yuko

2009-01-01

Several new regulatory approaches have been introduced to Japanese nuclear safety regulations, in which a prescriptive and deterministic approach had traditionally predominated. However, the options of regulatory approaches that can possibly be applied to nuclear safety regulations as well as the methodology for selecting the options are not systematically defined. In this study, various regulatory approaches for nuclear power plants are categorized as prescriptive or nonprescriptive, outcome-based or process-based, and deterministic or risk-informed. 18 options of regulatory approaches are conceptually developed and the conditions for selecting the appropriate regulatory approaches are identified. Current issues on nuclear regulations regarding responsibilities, transparency, consensus standards and regulatory inspections are examined from the viewpoints of regulatory approaches to verify usefulness of the categorization and selection concept of regulatory approaches. Finally, some of the challenges at the transitional phase of regulatory approaches are discussed. (author)

77 FR 74033 - Standard Mail Pricing

Science.gov (United States)

2012-12-12

... POSTAL REGULATORY COMMISSION [Docket No. R2012-5; Order No. 1568] Standard Mail Pricing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a recent Postal Service filing concerning an amendment to an existing negotiated service agreement with Canada Post Corporation...

Systematic Assessment of Regulatory Competences (SARCON) V18a

International Nuclear Information System (INIS)

Zimmermann, Moritz

2014-01-01

Why Competence Management? • Arrangements for competence management is a key factor to: • Support the implementation of article 8 of CNS (Convention on Nuclear Safety – “regulatory body with adequate competence and human resources”); • Support the implementation of Modules 3 and 4 of the IRRS and other IAEA Safety Standards (Module 3: “Responsibilities and functions of the regulatory body”, Module 4: “Management system of the regulatory body”); • Identify gaps between regulatory required competences and the existing resources; • Develop and implement tools and programmes to fill the gaps; • Review periodically the competence needs and training programmes

How to Integrate International Financial Reporting Standards into Accounting Programs

Science.gov (United States)

Singer, Robert A.

2012-01-01

It is expected the SEC will require U.S. domestic companies to prepare and file their annual 10Ks in accordance with international financial reporting standards (IFRS) by 2016. Given the probability that the FASB-IASB convergence project (i.e., Norwalk Agreement) will continue subsequent to mandatory adoption, US accounting programs will be…

Environmental assessment for the Consumer Products Efficiency Standards program

Energy Technology Data Exchange (ETDEWEB)

1980-05-23

The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

The effect of state renewable portfolio standards on consumer participation in green pricing programs

Science.gov (United States)

Maltese, James L.

In the last several years, two mechanisms for increasing the supply of renewable electricity have become increasingly popular: renewable portfolio standards, a state policy of mandating increased production of green power; and green pricing programs, which allow customers to purchase green power through their utilities. These mechanisms have been effective in increasing the adoption of renewable energy; however, it is unclear whether they interact in a way that is mutually beneficial or counterproductive. It is important to understand the effect of renewable portfolio standards on the voluntary market for green energy, especially as Congress considers a nationwide portfolio standard. The effectiveness of a renewable portfolio standard may be undercut if it leads customers to purchase less green power. This study analyzes the relationship between the passage and implementation of a renewable portfolio standard and two measures of enrollment in utility green pricing programs. Using eight years of data for all fifty states, the study utilizes multiple regression analysis with fixed-effects estimation. The results indicate that the passage of a renewable portfolio standard has a positive and statistically significant effect on green pricing enrollment within the state. At the same time, the rate at which states increase the stringency of the renewable portfolio standard is found to have no effect on enrollment. Although further study is needed to determine if additional factors are responsible for the observed increase in green pricing enrollment, this study provides evidence that such programs do not harm, and may in fact encourage, voluntary purchases of green power.

Continuous Improvement of the Regulatory Framework for the Control of Medical Exposure

International Nuclear Information System (INIS)

Larcher, A.M.; Ortiz lopez, Pedro; Arias, Cesar; Marechal, Maria H.; Hernandez Alvarez, Ramon; Ferrer Garcia, Natividad; Castaneda Mucino, Antonia; Faller, Blanca

2011-01-01

Background: One of the key elements to guide the improvement of the regulatory control is the availability of a self-assessment tool for regulatory performance. Although there is general guidance on self-assessment for regulators and users (IAEA), there is a need for specific advice on how to address challenges and difficulties faced by regulatory bodies, when regulating radiation protection of patients. Examples of these challenges are the need of regulatory initiatives, in cooperation with health and education authorities, professional bodies and equipment suppliers, and to put in place necessary elements that are beyond responsibility of individual users of radiation, to enable them compliance with safety standards. Purpose: within the programme of the Ibero American Forum of Nuclear and Radiation Safety Regulatory Organizations, a project to develop such a self assessment tool for the regulatory control of medical exposure has been designed. Method: national experiences in transposing and enforcing the international radiation safety standards, as to how the requirements are included in national regulations are reviewed. Further, difficulties to the implementation of safety requirements are included in national regulations are analyzed and a self assessment approach and possible regulatory solutions are presented. Results and discussion: in tis study the following documents are being produced: 1) Transposition of international requirements into national regulations in the six countries of the Forum, 2) difficulties to implement and enforce the requirements, 3) guidance on self assessment of regulatory framework for medical exposure, 4) suggested contribution to the revision of international radiation safety standards. (authors)

[The Purpose of Medical Education: Proposal to Standardize a System of Credits for Medical Specializations Programs].

Science.gov (United States)

Cañar, Carlos Andrés Pineda

2012-01-01

This article analyzes the concept of an academic credit system and proposes a way to systematize medical specialization programs. The credit system is a way to recognize and standardize the total time that a student must devote to their training. Thus, a credit equal to a certain number of hours of classroom training and independent activities is proposed. An educational program is expressed in the number of credits needed for the whole training process to achieve the competencies expected. A review of the concept of competition in education is also performed. The introduction of the term and its relation to the need to measure performance in future professionals according to labor market needs is identified. A critical discussion about skills defining the different types of skills in the educational field is later discussed. Subsequently, the Colombian regulatory framework is presented concerning the powers, in particular, Decree 1295 of 2010, which defines one academic credit equal to 48 hours in a semester, of which 16 hours are classroom and 32 hours are independent study. A tor of the major milestones in the history of medical education is later made. The structure of credits and contact hours, independent of postgraduate psychiatry in the country is reviewed showing the heterogeneity in their approach. The proposal is presented, defining the types of classroom activities and how to calculate the hours of independent study by type of classroom activity. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Regulatory practices of radiation safety of SNF transportation in Russia

International Nuclear Information System (INIS)

Kuryndina, Lidia; Kuryndin, Anton; Stroganov, Anatoly

2008-01-01

This paper overviews current regulatory practices for the assurance of nuclear and radiation safety during railway transportation of SNF on the territory of Russian Federation from NPPs to longterm-storage of reprocessing sites. The legal and regulatory requirements (mostly compliant with IAEA ST-1), licensing procedure for NM transportation are discussed. The current procedure does not require a regulatory approval for each particular shipment if the SNF fully comply with the Rosatom's branch standard and is transported in approved casks. It has been demonstrated that SNF packages compliant with the branch standard, which is knowingly provide sufficient safety margin, will conform to the federal level regulations. The regulatory approval is required if a particular shipment does not comply with the branch standard. In this case, the shipment can be approved only after regulatory review of Applicant's documents to demonstrate that the shipment still conformant to the higher level (federal) regulations. The regulatory review frequently needs a full calculation test of the radiation safety assurance. This test can take a lot of time. That's why the special calculation tools were created in SEC NRS. These tools aimed for precision calculation of the radiation safety parameters by SNF transportation use preliminary calculated Green's functions. Such approach allows quickly simulate any source distribution and optimize spent fuel assemblies placement in cask due to the transport equation property of linearity relatively the source. The short description of calculation tools are presented. Also, the paper discusses foreseen implications related to transportation of mixed-oxide SNF. (author)

Draft CSA standard on environmental risk assessments at class I nuclear facilities and uranium mines and mills

International Nuclear Information System (INIS)

Hart, D.; Garisto, N.; Parker, R.; Kovacs, R.; Thompson, B.

2012-01-01

The Canadian Standards Association (CSA) is preparing a draft Standard on environmental risk assessments (ERAs) at Class I nuclear facilities and uranium mines and mills (CSA N288.6). It is being prepared by a technical subcommittee of the CSA N288 Technical Committee, including experts from across the nuclear industry, government and regulatory authorities, and environmental service providers, among others. It addresses the design, implementation, and management of environmental risk assessment programs, and is intended to standardize practice across the industry. This paper outlines the scope of the draft Standard and highlights key features. It is under development and subject to change. (author)

76 FR 17617 - Multi-Agency Informational Meeting Concerning Compliance With the Federal Select Agent Program...