Toward introduction of risk informed safety regulation. Nuclear Safety Commission taskforce's interim report

International Nuclear Information System (INIS)

2006-01-01

Nuclear Safety Commission's taskforce on 'Introduction of Safety Regulation Utilizing Risk Information' completed the interim report on its future subjects and directions in December 2005. Although current safety regulatory activities have been based on deterministic approach, this report shows the risk informed approach is expected to be very useful for making nuclear safety regulation and assurance activities reasonable and also for appropriate allocation of regulatory resources. For introduction of risk informed regulation, it also recommends pileups of experiences with gradual introduction and trial of the risk informed approach, improvement of plant maintenance rules and regulatory requirements utilizing risk information, and establishment of framework to assure quality of risk evaluation. (T. Tanaka)

Fire safety regulations and licensing

International Nuclear Information System (INIS)

Berg, H.P.

1998-01-01

Experience of the past tow decades of nuclear power plant operation and results obtained from modern analytical techniques confirm that fires may be a real threat to nuclear safety and should receive adequate attention from the design phase throughout the life of the plant. Fire events, in particular influence significantly plant safety due to the fact that fires have the potential to simultaneously damage components of redundant safety-related equipment. Hence, the importance of fire protection for the overall safety of a nuclear power plant has to be reflected by the fire safety regulations and to be checked during the licensing process of a plant as well as during the continuous supervision of the operating plant

Improving the rationality of nuclear safety regulations

International Nuclear Information System (INIS)

Choi, Byung Sun; Choi, Y. G.; Mun, G. H.

2005-03-01

This study focuses on human nature and institutions around the risk management in Korean Nuclear Installations. Nuclear safety regulatory system in Korea has had a tendency to overvalue the technical or engineering areas. But just like other risk management system, the knowledge of social science is also required to design more valid safety regulatory system. As a result of analysis, this study suggest that performance regulation need to be introduced to current nuclear safety regulation system. In this advanced regulatory system, each nuclear generation unit have to be evaluated by performance of its own regulatory implementation and would be treated differently by the performance. Additionally, self-regulation could be very effective was to guarantee nuclear safety. Because KHNP could be judged to have an considerable capabilities to manage its own regulatory procedures. To make self-regulatory system established successfully, it is also important to arrange the appropriate incentive and compensate structures

Driving Safety and Fitness to Drive in Sleep Disorders.

Science.gov (United States)

Tippin, Jon; Dyken, Mark Eric

2017-08-01

Driving an automobile while sleepy increases the risk of crash-related injury and death. Neurologists see patients with sleepiness due to obstructive sleep apnea, narcolepsy, and a wide variety of neurologic disorders. When addressing fitness to drive, the physician must weigh patient and societal health risks and regional legal mandates. The Driver Fitness Medical Guidelines published by the National Highway Traffic Safety Administration (NHTSA) and the American Association of Motor Vehicle Administrators (AAMVA) provide assistance to clinicians. Drivers with obstructive sleep apnea may continue to drive if they have no excessive daytime sleepiness and their apnea-hypopnea index is less than 20 per hour. Those with excessive daytime sleepiness or an apnea-hypopnea index of 20 per hour or more may not drive until their condition is effectively treated. Drivers with sleep disorders amenable to pharmaceutical treatment (eg, narcolepsy) may resume driving as long as the therapy has eliminated excessive daytime sleepiness. Following these guidelines, documenting compliance to recommended therapy, and using the Epworth Sleepiness Scale to assess subjective sleepiness can be helpful in determining patients' fitness to drive.

49 CFR 385.321 - What failures of safety management practices disclosed by the safety audit will result in a...

Science.gov (United States)

2010-10-01

... disclosed by the safety audit will result in a notice to a new entrant that its USDOT new entrant... MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.321 What failures of safety management practices disclosed by the safety audit will result in a notice...

Economic consideration of nuclear safety and cost benefit analysis in nuclear safety regulation

International Nuclear Information System (INIS)

Choi, Y. S.; Choi, K. S.; Choi, K. W.; Song, I. J.; Park, D. K.

2001-01-01

For the optimization of nuclear safety regulation, understanding of economic aspects of it becomes increasingly important together with the technical approach used so far to secure nuclear safety. Relevant economic theories on private and public goods were reviewed to re-illuminate nuclear safety from the economic perspective. The characteristics of nuclear safety as a public good was reviewed and discussed in comparison with the car safety as a private safety good. It was shown that the change of social welfare resulted from the policy change induced can be calculated by the summation of compensating variation(CV) of individuals. It was shown that the value of nuclear safety could be determined in monetary term by this approach. The theoretical background and history of cost benefit analysis of nuclear safety regulation were presented and topics for future study were suggested

Safety goals and safety culture opening plenary. 2. Safety Regulation Implemented by Gosatomnadzor of Russia

International Nuclear Information System (INIS)

Gutsalov, A.T.; Bukrinsky, A.M.

2001-01-01

This paper describes principles and approaches used by Gosatomnadzor of Russia in establishing safety goals. The link between safety goals and safety culture is demonstrated. The paper also contains information on nuclear regulatory activities in Russia. Regulatory documents of Gosatomnadzor of Russia do not provide precise definitions of safety goals as IAEA documents INSAG-3 or INSAG-12 do. However, overall activities of Gosatomnadzor of Russia are directed to the achievement of these safety goals, as Gosatomnadzor of Russia is a federal executive authority responsible for the regulation of nuclear and radiation safety in accordance with the Russian Federal Law 'On the Use of Nuclear Energy'. Thus, in the Statement of the Policy of the Russian Regulatory Authority, enacted in 1992, it was established that the overall activities of Gosatomnadzor of Russia are directed to the achievement of the main goal. This goal is to establish conditions that ensure that personnel, the public, and the environment are protected from unacceptable radiation and nonproliferation of nuclear materials. The practical application of such a method as given by the publication of Statements of Policy of Gosatomnadzor of Russia may be considered as a safety culture element. 'General Provisions of NPP Safety Ensuring' (OPB-88/ 97) is a regulatory document of the highest level in the hierarchy of regulatory documents of Gosatomnadzor of Russia. It establishes quantitative values of safety goals as do the foregoing IAEA documents. Thus, this regulatory document sets up the following: 1. The estimated total probability of severe accidents should not exceed 10 5 /reactor.yr. 2. The estimated probability of the worst possible radioactive release to the environment specified in the standards should not exceed 10 -7 /reactor.yr in the case of severe beyond-design-basis accidents. 3. The probability of a reactor vessel failure should not exceed 10 -7 /reactor.yr. The foregoing values are somehow

Radiation Safety (Qualifications) Regulations 1980

International Nuclear Information System (INIS)

1980-01-01

These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.

48 CFR 245.7311-2 - Safety, security, and fire regulations.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Safety, security, and fire regulations. 245.7311-2 Section 245.7311-2 Federal Acquisition Regulations System DEFENSE ACQUISITION... Inventory 245.7311-2 Safety, security, and fire regulations. ...

The politics of nuclear safety regulation

International Nuclear Information System (INIS)

Adam, G.

2002-01-01

The paper discusses political aspects of decision making about the safety of nuclear power plants especially in Eastern Europe and in connection with the enlargement of the European Union. The problem of the Kozloduy NPP safety is also discussed. Recommendations on the policy and tasks for nuclear regulators are given

Regulatory Body Safety Culture in Non-nuclear HROs: Lessons for Nuclear Regulators

International Nuclear Information System (INIS)

Fleming, M.; Bowers, K.

2016-01-01

Regulator safety culture is a relatively new area of investigation, even though deficiencies in regulatory oversight have been identified in a number of public inquiries (e.g., Piper Alpha, Deep Water Horizon). More recently the IAEA report into the Fukushima disaster specifically identified the need for regulatory bodies to have a positive safety culture. While there are clear parallels between duty holder safety culture and regulator safety culture there are also likely to be differences. To date they have been no published studies investigating regulator safety culture. In order to develop a framework to understand regulator safety culture we conducted a literature review and interviewed safety culture subject matter experts from a range of HRO domains (e.g., offshore oil and gas). There was general consensus among participants that regulatory safety culture was an important topic that was worthy of further investigation. That there was general agreement that regulatory safety culture was multi-dimensional and that some of the elements of existing safety culture models applied to regulator culture (e.g., learning and leadership). The participants also identified unique dimensions of regulator safety culture including commitment to high standards and ethics, transparency and perceived role of the regulator. In this paper we will present the results of the interviews and present a model of regulator safety culture. This model will be contrasted with models being used in the nuclear industry. Implications for assessing regulatory safety culture will be discussed. (author)

Development of NPP safety regulation in Russia

International Nuclear Information System (INIS)

Vishnevsky, Y.G.; Gutsalov, A.T.; Bukrinsky, A.M.; Gordon, B.G.

1999-01-01

The presentation describes the organisation scheme of Russian safety regulatory bodies, their tasks and responsibilities. Legislative and regulatory basis of NPP safety regulations rely on the federal laws: Law on the Use of Nuclear Energy and Law on Radiation Safety of the Population. Role of international cooperation and Improvement of regulatory activities in Russia are emphasised

Safety regulations for radioisotopes, etc. (interim report)

International Nuclear Information System (INIS)

1980-01-01

An (interim) report by an ad hoc expert committee to the Nuclear Safety Commission, on the safety regulations for radioisotopes, etc., was presented. For the utilization of radioisotopes, etc., there is the Law Concerning Prevention of Radiation Injury Due to Radioisotopes, etc. with the advances in this field and the improvement in international standards, the regulations by the law have been examined. After explaining the basic ideas of the regulations, the problems and countermeasures in the current regulations are described: legal system, rationalization in permission procedures and others, inspection on RI management, the system of the persons in charge of radiation handling, RI transport, low-level radioactive wastes, consumer goods, definitions of RIs, radiation and sealed sources, regulations by group partitioning, RI facilities, system of personnel exposure registration, entrusting of inspection, etc. to private firms, and reduction in the works for permission among governmental offices. (author)

Legislation for the countermeasures on special issues of nuclear safety regulations

International Nuclear Information System (INIS)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul

2003-02-01

Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea

Legislation for the countermeasures on special issues of nuclear safety regulations

Energy Technology Data Exchange (ETDEWEB)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

2003-02-15

Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea.

On the Regulation of Life Safety Risk

DEFF Research Database (Denmark)

Faber, Michael Havbro; Sørensen, John Dalsgaard; Vrouwenvelder, A.C.W.M.

2015-01-01

. Starting point is taken in a short outline of what is considered to comprise the present best practice rationale for life safety and health risk regulation. Thereafter, based on selected principal examples from different application areas, inconsistencies in present best practice risk quantification...... absolute level of individual life safety risk subject to assessment of acceptability. It is highlighted that a major cause of inconsistency in risk quantifications and comparisons originates from the fact that present regulations partly address societal activities and partly address applied technologies...

Safety regulations: Implications of the new risk perspectives

International Nuclear Information System (INIS)

Aven, T.; Ylönen, M.

2016-01-01

The current safety regulations for industrial activities are to a large extent functionally oriented and risk-based (informed), expressing what to achieve rather than the means and solutions needed. They are founded on a probability-based perspective on risk, with the use of risk assessment, risk acceptance criteria and tolerability limits. In recent years several risk researchers have argued for the adoption of some new types of risk perspectives which highlight uncertainties rather than probabilities in the way risk is defined, the point being to better reflect the knowledge, and lack of knowledge, dimension of risk. The Norwegian Petroleum Safety Authority has recently implemented such a perspective. The new ISO standard 31000 is based on a similar thinking. In this paper we discuss the implications of these perspectives on safety regulation, using the oil & gas and nuclear industries as illustrations. Several suggestions for how to develop the current safety regulations in line with the ideas of the new risk perspectives are outlined, including some related to the use of risk acceptance criteria (tolerability limits). We also point to potential obstacles and incentives that the larger societal and institutional setting may impose on industry as regards the adoption of the new risk perspectives. - Highlights: • Some new types of risk perspectives have been promoted. • They have been implemented for example by the Norwegian Petroleum Safety Authority. • The paper studies the implication of these perspectives on the risk regulation. • Suggestions for how to develop the regulations are provided • Obstacles and incentives for the implementation of the perspectives are pointed to.

NEA activities in safety and regulation

International Nuclear Information System (INIS)

Stadie, K.B.

1983-01-01

The NEA programme on Safety and Regulations is briefly reviewed. It encompasses four main areas - nuclear safety technology; nuclear licensing; radiation protection; and waste management - with three principal objectives: to promote exchanges of technical information in order to enlarge the data base for national decision making; to improve co-ordination of national R and D activities with emphasis on international standard problem exercises, and to promote international projects; to develop common technical, administrative and legal approaches to improve compatibility of safety and regulatory practices

Strategy for public understanding and participation in nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Kim, H. J.; Chung, Yun Hyung

2004-02-15

The objective of this study is to help the general public and local residents to better understand and trust nuclear safety regulation. In order to obtain public confidence in nuclear safety regulation, the emotion and demand of public should be first understood and the change in an attitude to meet the present circumstances actively is requisite. Hence it is intended that a genuine communication shall be newly arranged and accomplished on the basis of mutual understanding. To achieve this, a series of public opinion poll have performed periodically and symposium for the public acceptance is held in order to frame a policy based on the understanding of nuclear safety and regulation of the general public and local residents. Besides nuclear safety indicators including safety sentiment indicators are being developed as a means to understand the safety of operating nuclear power plants from the viewpoint of the general public, a plan for the harmonious communication of nuclear safety information is established, and handbooks of nuclear terminologies and report-writing are under development in part. Finally plans for convergence of the public opinions and a wide public involvement in nuclear safety regulation are formulated and their applicability as organization and administration program is now under consideration.

Iron homeostasis in Arabidopsis thaliana: transcriptomic analyses reveal novel FIT-regulated genes, iron deficiency marker genes and functional gene networks.

Science.gov (United States)

Mai, Hans-Jörg; Pateyron, Stéphanie; Bauer, Petra

2016-10-03

FIT (FER-LIKE IRON DEFICIENCY-INDUCED TRANSCRIPTION FACTOR) is the central regulator of iron uptake in Arabidopsis thaliana roots. We performed transcriptome analyses of six day-old seedlings and roots of six week-old plants using wild type, a fit knock-out mutant and a FIT over-expression line grown under iron-sufficient or iron-deficient conditions. We compared genes regulated in a FIT-dependent manner depending on the developmental stage of the plants. We assembled a high likelihood dataset which we used to perform co-expression and functional analysis of the most stably iron deficiency-induced genes. 448 genes were found FIT-regulated. Out of these, 34 genes were robustly FIT-regulated in root and seedling samples and included 13 novel FIT-dependent genes. Three hundred thirty-one genes showed differential regulation in response to the presence and absence of FIT only in the root samples, while this was the case for 83 genes in the seedling samples. We assembled a virtual dataset of iron-regulated genes based on a total of 14 transcriptomic analyses of iron-deficient and iron-sufficient wild-type plants to pinpoint the best marker genes for iron deficiency and analyzed this dataset in depth. Co-expression analysis of this dataset revealed 13 distinct regulons part of which predominantly contained functionally related genes. We could enlarge the list of FIT-dependent genes and discriminate between genes that are robustly FIT-regulated in roots and seedlings or only in one of those. FIT-regulated genes were mostly induced, few of them were repressed by FIT. With the analysis of a virtual dataset we could filter out and pinpoint new candidates among the most reliable marker genes for iron deficiency. Moreover, co-expression and functional analysis of this virtual dataset revealed iron deficiency-induced and functionally distinct regulons.

Alternative development and action plan for the atomic safety regulation instruments

International Nuclear Information System (INIS)

Kim, J. Y.; Ahn, S. K.; Ham, Y. S.

2004-01-01

The goal of this study to provide highly practical model to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency

Development of Comprehensive Nuclear Safety Regulation Plan for 2007-2011

International Nuclear Information System (INIS)

Choi, Young Sung; Kim, Woong Sik; Park, Dong Keuk; Kim, Ho Ki

2006-01-01

The Article 8-2 of Atomic Energy Act requires the government to establish Atomic Energy Promotion Plan every five years. It sets out national nuclear energy policies in a systematic and consistent way. The plan presents the goals and basic directions of national nuclear energy policies on the basis of current status and prospects. Both areas of utilization and safety management of nuclear energy are included and various projects and schedules are delineated based on the national policy directions. The safety management area in this plan deals with the overall safety and regulation policy. Its detail projects and schedule should be developed in separate plans by responsible ministries under the mediation of the MOST. As a regulatory authority, MOST is responsible for safety management area and its technical support organization, KINS has developed Comprehensive Nuclear Safety Regulation Plan as an implementation plan of safety area. This paper presents the development process and specific projects contained in the Comprehensive Nuclear Safety Regulation Plan which is under development now

78 FR 11092 - Safety and Health Regulations for Construction

Science.gov (United States)

2013-02-15

... LABOR DEPARTMENT Occupational Safety and Health Administration 29 CFR Part 1926 Safety and Health Regulations for Construction CFR Correction In Title 29 of the Code of Federal Regulations, Part 1926, revised as of July 1, 2012, on page 225, in Sec. 1926.152, paragraph (c)(16) is added to read as follows: Sec...

Improving fit to work assessments for rail safety workers by exploring work limitations

NARCIS (Netherlands)

Boschman, J. S.; Hulshof, C. T. J.; Frings-Dresen, M. H. W.; Sluiter, J. K.

2016-01-01

We aim to provide evidence for improving fit to work assessments for rail safety workers and raised the question whether adding an assessment of work limitations is useful. Therefore, we assessed differences in the proportions of perceived work limitations and reported health complaints and whether

Review of Policy Documents for Nuclear Safety and Regulation

International Nuclear Information System (INIS)

Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki

2006-01-01

The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies

Review of Policy Documents for Nuclear Safety and Regulation

Energy Technology Data Exchange (ETDEWEB)

Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

2006-07-01

The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies.

Implementation of the new regulation on radiological safety in Peru

International Nuclear Information System (INIS)

Medina Gironzini, E.

1997-01-01

Since its creation in 1975, the Peruvian Institute of Nuclear Energy (IPEN) has enacted three regulations of national importance on the norms of protection against ionizing radiation. The first regulation, which is called regulation of radiological protection (1980) approved by a resolution of IPEN, is the result of the work of a committee constituted by IPEN and the Ministry of Health. Its implementation caused some problems as result of which, in 1989, a new regulation on radiological protection was enacted through a supreme decree. Taking into account the new recommendation of the International Commission on Radiological Protection and the International Basic Safety Standard for Protection against Ionizing Radiation and for the Safety of Radiation Sources, approved in May 1997, the regulation of radiological safety also considers evolving aspects in the Project ARCAL XVII/IAEA. This regulation includes various topics such as exclusions, requirements of protection (medical exposure, occupational exposure, public exposure, chronic exposure), requirements of source safety, interventions and emergencies, control of sources and practices (exemptions, authorizations, inspections) etc. The implementation of this regulation at the national level falls to IPEN, the unique authority commissioned to control nuclear installations, radioactivity and x ray facilities in medicine, industry and research

Education and Training of Safety Regulation for Nuclear Safety Infrastructure: Its Necessity and Unique Features

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Young Joon; Lee, Jae Cheon

2009-01-01

Faced with global warming and electricity demands, countries over the world recognize the comparative advantages of nuclear energy. It is estimated that about 300 nuclear power plants (NPPs) expect to be constructed until 2030 worldwide. In addition, according to the IAEA, approximately 20 new countries might have their first NPP in operation by 2030 in the high projection compared with bout 5 new countries in the low projection. When introducing nuclear power, the implementation of an appropriate infrastructure to address all of the relevant issues is a central concern of international community. In particular, nuclear power program requires, at an earlier stage than when construction starts, the development of a legal and regulatory framework and training of regulators and safety experts whose combined knowledge adequately covers all areas of nuclear safety and regulation applied at a NPP construction and operation. As an essential component of such human resource development, special attention was paid to the provision of education and training to regulators of which countries plan to introduce NPPs. In term of education theory, safety regulation has some unique features in learning and teaching, which are different from those of nuclear engineering or development. This paper overviews nuclear safety infrastructure, explores the roles of exporting countries, and presents features and components in education of nuclear safety regulation

Legislation for the countermeasures on special issues of nuclear safety regulations

International Nuclear Information System (INIS)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul

2004-02-01

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation

Legislation for the countermeasures on special issues of nuclear safety regulations

Energy Technology Data Exchange (ETDEWEB)

Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

2004-02-15

Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation.

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-10-15

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

49 CFR 385.313 - Who will conduct the safety audit?

Science.gov (United States)

2010-10-01

... FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.313 Who will conduct the safety audit? An individual certified under the FMCSA regulations to perform safety audits will conduct the safety audit. ... 49 Transportation 5 2010-10-01 2010-10-01 false Who will conduct the safety audit? 385.313 Section...

Leadership for Safety in Practice: Perspectives from a Nuclear Regulator

International Nuclear Information System (INIS)

Tyobeka, B. M.

2016-01-01

The principal responsibility for a nuclear regulator is to assure compliance with regulations and safety standards by operators. One of these requirements is demonstration of, and adherence to, nuclear safety culture by the operators. At the same time, the regulators themselves are expected to live the talk and practice what they preach, i.e., demonstrate highest levels of nuclear safety culture within their organizations. Consequently, it is recognised that leadership is important in the creation of a culture that supports and promotes a strong nuclear safety performance of an organization. The leaders of a regulatory body are vital in inspiring employees to a higher level of safety and productivity, which means that they must apply good leadership attributes on a daily basis. This paper will attempt to bring forth and share attributes for strong leadership role in promoting a safety culture within a nuclear regulatory body by surveying world-wide practices and examples in developing and advanced nuclear countries. (author)

Improving the regulation of safety at DOE nuclear facilities. Final report

International Nuclear Information System (INIS)

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by DOE itself. The three major recommendations are: under any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

Nuclear safety: risks and regulation

International Nuclear Information System (INIS)

Wood, W.C.

1983-01-01

Taking a fresh look at nuclear safety regulations, this study finds that the mandate and organization of the Nuclear Regulatory Commission (NRC) militate against its making sound decisions. The author criticizes failures to make hard decisions on societal risk, to clarify responsibility, and to implement cost-effective safety measures. Among his recommendations are reorganization of the NRC under a single authoritative administrator, separation of technical issues from social ones, and reform of the Price-Anderson Act. The author concludes that the worst eventuality would be to continue the current state of indecision. 161 references, 6 figures, 4 tables

Domestic Regulation for Periodic Safety Review of Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Daesik; Ahn, Seunghoon; Auh, Geunsun; Lee, Jonghyeok

2015-01-01

The so-called Periodic Safety Review (PSR) has been carried out such safety assessment throughout its life, on a periodic basis. In January 2001, the Atomic Energy Act and related regulations were amended to adopt the PSR institutional scheme from IAEA Nuclear Safety Guide 50-SG-O12. At that time the safety assessment was made to review the plant safety on 10 safety factors, such as aging management and emergency planning, where the safety factor indicates the important aspects of safety of an operating NPP to be addressed in the PSR. According to this legislation, the domestic utility, the KHNP has conducted the PSR for the operating NPP of 10 years coming up from operating license date, starting since May 2000. Some revisions in the PSR rule were made to include the additional safety factors last year. This paper introduces the current status of the PSR review and regulation, in particular new safety factors and updated technical regulation. Comprehensive safety assessment for Korea Nuclear Power Plants have performed a reflecting design and procedure changes and considering the latest technology every 10 years. This paper also examined the PSR system changes in Korea. As of July 2015, reviews for PSR of 18 units have been completed, with 229 nuclear safety improvement items. And implementation have been completed for 165 of them. PSR system has been confirmed that it has contributed to improvement of plant safety. In addition, this paper examined the PSR system change in Korea

R and D perspectives on the advanced nuclear safety regulation system

International Nuclear Information System (INIS)

Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook; Han, Sang Hoon; Lee, Jung Won

2009-01-01

As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea

R and D perspectives on the advanced nuclear safety regulation system

Energy Technology Data Exchange (ETDEWEB)

Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Han, Sang Hoon; Lee, Jung Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2009-04-15

As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea.

Radiation Safety of Accelerator Facility with Regard to Regulation

International Nuclear Information System (INIS)

Dedi Sunaryadi; Gloria Doloresa

2003-01-01

The radiation safety of accelerator facility and the status of the facilities according to licensee in Indonesia as well as lesson learned from the accidents are described. The atomic energy Act No. 10 of 1997 enacted by the Government of Indonesia which is implemented in Radiation Safety Government Regulation No. 63 and 64 as well as practice-specific model regulation for licensing request are discussed. (author)

Legal principles of regulatory administration and nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyeong Hui; Cheong, Sang Kee [Hannam Univ., Taejon (Korea, Republic of)

2000-12-15

This research presents a critical analysis and evaluation of principles of administrative laws in order to provide framework of structural reform on the nuclear safety regulation system. The focus of this analysis and evaluation is centered around the area of origin of regulatory administrative laws; authorities of regulation; procedures of regulatory actions; regulatory enforcement; and administrative relief system. In chapter 2 the concept of regulatory administration is analysed. Chapter 3 identifies the origin of regulatory administration and the principles of administration laws. It also examines legal nature of the nuclear safety standard. In relation to regulatory authorities. Chapter 4 identifies role and responsibility of administration authorities and institutions. It also examines fundamental principles of delegation of power. Then the chapter discusses the nuclear safety regulation authorities and their roles and responsibilities. Chapter 5 classifies and examines regulatory administration actions. Chapter 6 evaluates enforcement measure for effectiveness of regulation. Finally, chapter 7 discusses the administrative relief system for reviewing unreasonable regulatory acts.

Offshore regulators focus on incentives for safety

Energy Technology Data Exchange (ETDEWEB)

Reid, W.

2000-11-27

Strict safety regulations in effect at offshore drilling sites are discussed. The guiding principle in all existing regulation is that while economic or industrial considerations are important, the value and the concern for human life is paramount. Should some tragic event occur at an offshore drilling site that is shown to have been caused by negligence of an operator, there is no question at all that the regulatory authority, in this case the Canada-Newfoundland Offshore Petroleum Board (CNOPB), would take the negligent operator to court. Nevertheless, Canadian authorities remain confident that encouragement of maintaining a safe working environment is likely to be more successful in ensuring workplace safety than threats of punishment. Indeed, Canadian regulators have, in recent times, shown a tendency to move towards performance-based systems, as opposed to the more usual prescriptive or rule-bound regulatory regime. This new approach involves setting targets and giving companies the responsibility to implement measures to reach the targets rather than relying on government instructions. Still, performance-based regulation in Canada is relatively new and some regulations remain prescriptive. Examples are the requirement for two immersion suits and two lifeboat seats for every worker on a drilling unit.

Safety culture in nuclear installations - The role of the regulator

International Nuclear Information System (INIS)

Karigi, Alice W.

2002-01-01

Safety culture is an amalgamation of values, standards, morals and norms of acceptable behavior by the licensees, Radiation workers and the Regulator. The role played by a Regulator in establishing safety culture in a nuclear installation is that related to Authorization, review, assessment, inspection and enforcement. The regulator is to follow the development of a facility or activity from initial selection of the site through design, construction, commissioning, radioactive waste management through to decommissioning and closure. He is to ensure safety measures are followed through out the operation of the facility by laying down in the license conditions of controlling construction of nuclear installations and ensuring competence of the operators. (author)

Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE`s nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation.

Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

International Nuclear Information System (INIS)

1995-12-01

The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

Radiation Safety (General) Regulations 1983 (Western Australia)

International Nuclear Information System (INIS)

1983-01-01

The provisions of the Regulations cover, inter alia, the general precautions and requirements relating to radiation safety of the public and radiation workers and registration of irradiating apparatus or premises on which such apparatus is operated. In addition, the Regulations set forth requirements for the operation of such apparatus and for the premises involved. (NEA) [fr

Impact of Construction Health & Safety Regulations on Project ...

African Journals Online (AJOL)

Impact of Construction Health & Safety Regulations on Project Parameters in Nigeria: Consultants and Contractors View. ... The study recommends that better attention is given to health and safety should as a project parameter and that related practice notes and guidelines should be evolved for all project stakeholders.

International Safety Regulation and Standards for Space Travel and Commerce

Science.gov (United States)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

49 CFR 385.319 - What happens after completion of the safety audit?

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What happens after completion of the safety audit... REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.319 What happens after completion of the safety audit? (a) Upon completion of the safety audit, the auditor will review the findings...

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Lee, Kwang Gu; Huh, Gyun Young; Hahn, Young Tae [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

2000-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. The approach to improve regulatory effectiveness is also reviewed and a transition to 'knowledge-based regulation' is suggested.

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Roh, Chang Hyun; Lee, Kwang Gu; Kim, Hong Chae; Lee, Yong Ho [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. Efforts are also required to cope with other circumstantial changes such as the establishment of International Nuclear Regulators Association (INRA)

Legal bases of safety regulations in electrical engineering

Energy Technology Data Exchange (ETDEWEB)

Jeiter, W

1981-12-01

Apart from the governmental regulations the rule for the prevention of accidents 'Electric plants and equipment' must be observed in order to protect the insurants. Actually, all these regulations do not contain any independent instructions. They rather utilize the VDE regulations and refer to them. The laws of electrical safety engineering are strongly influenced by harmonization efforts particularly within the European Communitties.

Pakistan nuclear safety and radiation protection regulation 1990

International Nuclear Information System (INIS)

1990-01-01

In this act regulations of nuclear safety and radiation protection in Pakistan has been explained. A legal and licensing procedure to handle protection of nuclear materials, processing storage of radioactive products has been described under this regulation. In these regulations full explanation of accidental exposure, delegation of powers and record keeping/waste disposal of radioactive has been given. (A.B.)

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

OpenAIRE

Ko, Wen-Hwa

2015-01-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was cla...

Safety Culture for Regulator Competence Management in Embarking States

International Nuclear Information System (INIS)

Kandil, M.

2016-01-01

Full text: Safety is based on preventive actions where the ability of a regulatory body to fulfill its responsibilities depends largely on the competence of its staff. Building employees’ skills and knowledge is an investment for each employee and in the future of the organization. This building must be the competence of its staff integration with their safety culture, the essential to ensure competent human resources as required in the IAEA safety standards and other documents, in which the need and importance of ensuring regulatory competence is emphasized. As it involves both operational and management issues, safety culture is a sensitive topic for regulators whose role is to ensure compliance with safety requirements and not to intervene in management decisions. A number of embarking States are aspiring to develop nuclear power generation and this means that, among other things, regulatory bodies have to be established and rapidly expanded. This paper reports major considerations on the integration of safety culture with an adequate competence management system for regulators in embarking states. (author

Investigation and consideration on the framework of oversight-based safety regulation. U.S. NRC 'Risk-Informed, Performance-Based' Regulation

International Nuclear Information System (INIS)

Saji, Gen

2001-01-01

Regulation on safety, environment and health in Japan has before today been intended to correspond with an accident at forms of reinforcement of national standards and monitoring, if any. However, as it was thought that such regulation reinforcement was afraid to bring some social rigidity, and to weaken independent responsibility, as a result, because of anxiety of losing peoples' merits inversely, some fundamental directivity such as respect of self-responsibility principle' and 'necessary and least limit of regulation' were selected as a part of political innovation. On the other hand, at a background of wide improvements on various indexing values showing operation results of nuclear power stations in U.S.A., private independent effort on upgrading of safety is told to largely affect at beginning of INPO (Institute of Nuclear Power Operations), without regulation reinforcement of NRC side. This is a proof of concrete effect of transfer to oversight-based safety regulation. Here were introduced on nuclear safety in U.S.A. at a base of some references obtained on entering the 'MIT summer specialist program. Nuclear system safety', on focussing at new safety regulation of NRC and its effect and so on, and adding some considerations based on some knowledge thereafter. (G.K.)

Fitting motivational content and process: A systematic investigation of fit between value framing and self-regulation.

Science.gov (United States)

Woltin, Karl-Andrew; Bardi, Anat

2017-12-28

Values are often phrased as ideals that people seek to approach, but they can also be conceptualized as counter-ideals that people seek to avoid. We aimed to test whether individuals endorse more strongly values that are framed in line with their predominant self-regulatory motivation, using individual difference scales in promotion/prevention (Higgins, 1997) and in behavioral approach/inhibition (Carver & White, 1994). To address this systematically, we developed approach- and avoidance-framed versions of the Portrait Value Questionnaire-RR (PVQ-RR; Schwartz et al., 2012). Participants completed approach- and avoidance-framed PVQ-RR versions in two studies measuring regulatory focus or motivational orientation (together 414 U.S. adults, 48% female, ages 18-69) and one study manipulating motivational orientation (39 UK high school students, 79% female, ages 16-19). Value framing consistently interacted with both self-regulation variables. However, a fit between self-regulation and value framing resulted in greater value endorsement only for promotion-focused and approach-oriented (not prevention-focused and avoidance-oriented) participants. This may be because values are more naturally understood as ideal states that people seek to approach. Our findings provide first insights into the psychological process of person-value framing fit affecting value endorsement. We discuss implications for cross-cultural value research and research on value-congruent behavior. © 2017 Wiley Periodicals, Inc.

Nuclear safety: economic analysis of American, French and Japanese regulations

International Nuclear Information System (INIS)

Leveque, Francois

2013-05-01

While discussing and comparing the American, Japanese and French approaches and practices, and identifying the strengths and weaknesses of each of them, the author discusses why self-regulation and civil responsibility cannot guarantee a sufficient nuclear safety level, why the safety regulation authority must be independent from industry and government, whether a figure must be put to the safety objective (for example with a risk threshold), whether it is better to define detailed standards to be applied by manufacturers and operators or to define general performance criteria to be reached

Nuclear safety regulations in the Republic of Croatia

International Nuclear Information System (INIS)

Cizmek, A.; Horvatic, M.; Ilijas, B.; Medakovic, S.

2009-01-01

Based on Nuclear Safety Act (Official Gazette No. 173/03) in 2006 State Office for Nuclear Safety (SONS) adopted beside Ordinance on performing nuclear activities (Official Gazette No. 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (Official Gazette No. 74/06) the new Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08) and Ordinance on conditions for nuclear safety and protection with regard to the sitting, design, construction, use and decommissioning of a facility in which a nuclear activity is to be performed (Official Gazette No. 71/08). The Ordinance on performing nuclear activities regulates the procedure of notification of the intent to perform nuclear activities, submitting the application for the issue of a licence to perform nuclear activities, and the procedure for issuing decisions on granting a license to perform nuclear activity. The Ordinance also regulates the content of the form for notification of the intent to perform nuclear activities, as well as of the application for the issue of a licence to perform the nuclear activity and the method of keeping the register of nuclear conditions, whereas compliance is established by the decision passed by SONS. Ordinance on special conditions (requirements) for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety regulates these mentioned activities Ordinance on the control of nuclear material and special equipment lays down the list of nuclear materials and special equipment as well as of nuclear activities covered by the system of control of production of special equipment and non-nuclear material, the procedure for notifying the intention to and filing the application for a licence to carry out nuclear activities, and the format and contents of the forms for doing so. This Ordinance

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Who regulates food? Australians' perceptions of responsibility for food safety.

Science.gov (United States)

Henderson, Julie; Coveney, John; Ward, Paul

2010-01-01

Food scares have diminished trust in public institutions to guarantee food safety. Food governance after the food scare era is concerned with institutional independence and transparency leading to a hybrid of public and private sector management and to mechanisms for consumer involvement in food governance. This paper explores Australian consumers' perceptions of who is, and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry, and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Participants are wary of the role of the food industry in food safety, believing that profit motives will undermine effective food regulation. Personal responsibility for food safety practices was also identified. While there are fewer mechanisms for consumer involvement and transparency built into the food governance system, Australian consumers display considerable trust in government to protect food safety. There is little evidence of the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares.

Fusion safety regulations in the United States: Progress and trends

International Nuclear Information System (INIS)

DeLooper, J.

1994-01-01

This paper explores the issue of regulations as they apply to current and future fusion experimental machines. It addresses fusion regulatory issues, current regulations used for fusion, the Tokamak Fusion Test Reactor experience with regulations, and future regulations to achieve fusion's safety and environmental potential

Occupational demand and human rights. Public safety officers and cardiorespiratory fitness.

Science.gov (United States)

Shephard, R J

1991-08-01

The issue of discrimination in physically demanding employment, such as police, firefighters, prison guards and military personnel, is contentious. In terms of oxygen transport, the 'action limit' (calling for personnel selection or task redesign) is a steady oxygen consumption of 0.7 L/min, while the maximum permissible limit is 2.1 L/min. Note is taken of the commonly expressed belief that public safety duties are physically demanding, calling for personnel with an aerobic power of at least 3 L/min, or 42 to 45 ml/kg/min. The actual demands of such work can be assessed on small samples by physiological measurements (using heart rate or oxygen consumption meters), but the periods sampled may not be typical of a normal day. A Gestalt can also be formed as to the heaviness of a given job, or a detailed task analysis can be performed; most such analyses of public safety work list distance running and other aerobic activities infrequently. An arbitrary requirement of 'above average fitness' is no longer accepted by courts, but a further approach is to examine the characteristics of those currently meeting the demands of public safety jobs satisfactorily. Young men commonly satisfy the 3 L/min standard, but this is not usually the case for women or older men; in the case of female employees, it also seems unreasonable that they should be expected to satisfy the same standards as men, since a lower body mass reduces the energy cost of most of the tasks that they must perform. A second criterion sometimes applied to physically demanding work (a low vulnerability to heart attacks) is examined critically. It is concluded that the chances that a symptom-free public safety officer will develop a heart attack during a critical solo mission are so low that cardiac risk should not be a condition of employment. Arbitrary age- and sex-related employment criteria are plainly discriminatory, since some women and 65-year-old men have higher levels of physical fitness than the

A study in improvement of administrative system in the nuclear safety regulation

International Nuclear Information System (INIS)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho

2001-03-01

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents

A study in improvement of administrative system in the nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents.

Public opinion poll on safety and regulations of nuclear energy

Energy Technology Data Exchange (ETDEWEB)

Park, M. I.; Park, B. I.; Lee, S. M. [Gallup Korea, Seoul (Korea, Republic of)

2004-02-15

The purpose of this poll is not only to research understanding on safety and regulations of nuclear energy and to compare the result by time series followed 2003 to 2002 years, also to establish the public relations strategies and to offer information for developing long-term policies. The contents of the study are on the general perception, safety, management of nuclear power station, regulations and surroundings about nuclear energy.

49 CFR 385.337 - What happens if a new entrant refuses to permit a safety audit to be performed on its operations?

Science.gov (United States)

2010-10-01

... safety audit to be performed on its operations? 385.337 Section 385.337 Transportation Other Regulations... TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.337 What happens if a new entrant refuses to permit a safety audit to be performed on its...

Evolution of nuclear safety regulation for BARC Facilities

International Nuclear Information System (INIS)

Jayarajan, K.; Taly, Y.K.

2017-01-01

Safety programmes in BARC stared during the formative years and grown its stature, as the years passed by. Seventeen years of BSC, with one hundred meetings, have been quite eventful with several achievements. BSC could bring all facilities of BARC under its safety umbrella and could streamline many safety and regulatory activities. BSC aims at incident free operation of all facilities and protection of the workers, the public, the environment from radiation and other hazards. Although, incidents could not be entirely prevented, BSC have taken every event as a lesson and used the experience for improving safety. Safety enhancement is an endless journey, which has to be performed by joining hands of the managers, designers, manufacturers, inspectors and operators, in addition to the regulators

75 FR 50700 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge...

Science.gov (United States)

2010-08-17

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge Operation... notice lists temporary safety zones, security zones, special local regulations, and drawbridge operation... responsive to the safety and security needs within their jurisdiction; therefore, District Commanders and...

49 CFR 397.2 - Compliance with Federal motor carrier safety regulations.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Compliance with Federal motor carrier safety...) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HAZARDOUS MATERIALS; DRIVING AND PARKING RULES General § 397.2 Compliance with...

49 CFR 385.333 - What happens at the end of the 18-month safety monitoring period?

Science.gov (United States)

2010-10-01

... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.333 What happens at the end of the 18-month safety monitoring period? (a) If a safety audit has been performed within... the same basis as any other carrier. (d) If a safety audit or compliance review has not been performed...

A study on enforcement effects of radiation safety control regulations for diagnostic X-ray equipment

International Nuclear Information System (INIS)

Sung, Mo IL; Park, Myeong Hwan; Kwon, Duk Moon; Lee, Joon IL

1999-01-01

The purposes of this study are to analyze the realities after enforcements of safety control regulations for diagnostic X-ray equipment and to suggest means for an improvement of low radiation safety control. A questionnaire survey for medical radiologic technologists was carried out to determine enforcement effects of the safety control regulations. The results of analysis from the survey are as follows. That is, most of he respondents realized the importance of the radiation safety control system, but about a half of them revealed that regulations were not well observed in accordance with their purposes. Only 43.9 percent of the respondents took an active part in quality control of radiation. And responsibility, sex, age, and knowledge for safety control were important indicators for observations of the regulations. Training for the safety control regulations are needed to ensure safety control and proper usage of diagnostic X-ray equipment. And management of organizations using diagnostic X-ray equipment have to understand and stress the importance of radiation safety control system. (author)

The UK nuclear regulator's view of external influences on safety

International Nuclear Information System (INIS)

Summers, J.L.

2001-01-01

Over the past forty or so years, significant changes have taken place in the UK nuclear industry and the pace of change is continually increasing. As a consequence, the Nuclear Installations Inspectorate (NII), the UK's nuclear regulator, has also had to change. This paper describes some of the challenges to safety that have arisen in recent years and how NII's style of regulation has had to adapt to ensure that safety is maintained and improved. NII's approach has been to: be proactive in its relations with Government and market regulators; adopt new competencies to equip it for the challenges it faces; strive to improve its efficiency and effectiveness; and develop new approaches to regulating changes in licensees' organisations and ways of working. Importantly, NII seeks to anticipate change rather than react to it. (author)

Safety performance indicators used by the Russian Safety Regulatory Authority in its practical activities on nuclear power plant safety regulation

International Nuclear Information System (INIS)

Khazanov, A.L.

2005-01-01

The Sixth Department of the Nuclear, Industrial and Environmental Regulatory Authority of Russia, Scientific and Engineering Centre for Nuclear and Radiation Safety process, analyse and use the information on nuclear power plants (NPPs) operational experience or NPPs safety improvement. Safety performance indicators (SPIs), derived from processing of information on operational violations and analysis of annual NPP Safety Reports, are used as tools to determination of trends towards changing of characteristics of operational safety, to assess the effectiveness of corrective measures, to monitor and evaluate the current operational safety level of NPPs, to regulate NPP safety. This report includes a list of the basic SPIs, those used by the Russian safety regulatory authority in regulatory activity. Some of them are absent in list of IAEA-TECDOC-1141 ('Operational safety performance indicators for nuclear power plants'). (author)

A German perspective on advances in safety standards and regulations

International Nuclear Information System (INIS)

Berg, H.P.; Herttrich, P.M.

1993-01-01

At present, different proposals for evolutionary or innovative reactors are under consideration. Therefore, it is necessary that the regulators give guidance on the required safety characteristics of future designs of nuclear power plants. On the one hand, existing regulations have to be updated according to the current state of science and technology. Best available and adequately approved technology has to be used as a yardstick for the acceptability of future basic design features. On the other hand, potential safety features of innovative or revolutionary designs must be considered as serious competitors and potential technical solutions taking the state of maturity of the concepts, the extent of practical experience and the level of effort needed for realization into due account. On this background, recent developments of the Atomic Energy Act, of safety regulations and investigations of requirements for future designs in the Federal Republic of Germany and current projects of international cooperation are presented. (author)

Assessment of policy issues in nuclear safety regulation according to circumstantial changes

Energy Technology Data Exchange (ETDEWEB)

Chang, Soon Heung; Lee, Byong Ho; Baek, Woon Pil; Lee, Seong Wook; Choi, Seong Soo; Roh, Chang Hyun; Lee, Kwang Gu [Korea Advanced Institute of Scienc and Technology, Taejon (Korea, Republic of)

1998-03-15

The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. The derivation of an effective regulation system considering 'Rhodic Safety Review (PSR)', 'operating License Renewal (LR)', 'backfitting' and 'maintenance rule' is the main objective of the first two years. It is found that those approaches should be introduced in Korea as soon as possible, with cross lingkage to maximize the effectiveness of regulation. In particular, the approaches for PSR are discussed with consultation of IAEA document and foreign practices.

Development in France of nuclear safety technical regulations and standards used in the licensing procedure

International Nuclear Information System (INIS)

Lebouleux, P.

1983-04-01

Initially, the Commissariat a l'Energie Atomique was the overall structure which encompassed all nuclear activities in France, including those connected with radiological protection and nuclear safety. As other partners appeared, the Authorities have laid down national regulations relative to nuclear installations since 1963. These regulations more particularly provide for the addition of prescriptions with which the applicant must comply to obtain the necessary licenses and the establishment of General Technical Regulations pertaining to nuclear safety. The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operation of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. A RFS, or a letter, can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

NRC safety research in support of regulation, 1988

International Nuclear Information System (INIS)

1989-05-01

This report, the fourth in a series of annual reports, was prepared in response to Congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during 1988. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

The improvement of nuclear safety regulation : American, European, Japanese, and South Korean experiences

International Nuclear Information System (INIS)

Cho, Byung Sun

2005-01-01

Key concepts in South Korean nuclear safety regulation are safety and risk. Nuclear regulation in South Korea has required reactor designs and safeguards that reduce the risk of a major accident to less than one in a million reactor-years-a risk supposedly low enough to be acceptable. To data, in South Korean nuclear safety regulation has involved the establishment of many technical standards to enable administration enforcement. In scientific lawsuits in which the legal issue is the validity of specialized technical standards that are used for judge whether a particular nuclear power plant is to be licensed, the concept of uncertainty law is often raised with regard to what extent the examination and judgement by the judicial power affects a discretion made by the administrative office. In other words, the safety standards for nuclear power plants has been adapted as a form of the scientific technical standards widely under the idea of uncertainty law. Thus, the improvement of nuclear safety regulation in South Korea seems to depend on the rational lawmaking and a reasonable, judicial examination of the scientific standards on nuclear safety

FOOD SAFETY REGULATIONS BASED ON REAL SCIENCE

Directory of Open Access Journals (Sweden)

Huub LELIEVELD

2015-10-01

Full Text Available Differences in regulations result in needless destruction of safe food and hamper food trade. The differences are not just the result of the history of food safety regulations, often developed in times before global cooperation, but are also built in new regulations. It may be responses to media hypes or for other reasons, but in most cases the differences cannot be justified scientifically. A major difficulty is that, due to the developments in analytical techniques the number of chemicals that are found in food is increasing rapidly and chemicals are always suspected to be a safety risk. By far most chemicals are of natural origin but could not be detected in the past because the methods available in the past were not sensitive enough. Demanding the absence of chemicals because the risk they present is unknown, however, would eventually make all food unacceptable. The general public should be shown that everything they eat is chemical, and all food components will be toxic if the amount is too high. It should also be shown that many of these chemicals will also cause illness and death if there is not enough of it as is the case with vitamins and minerals.

Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

International Nuclear Information System (INIS)

Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

2003-01-01

Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

2006-01-01

Jan 1, 2006 ... Book cover Environmental Regulation and Food Safety: Studies of ... are sometimes perceived in developing countries as nontariff barriers to trade. ... In some cases, products that had initially been refused access to a ...

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

Directory of Open Access Journals (Sweden)

Wen-Hwa Ko

2015-12-01

Full Text Available The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry.

The Competence Promoting by NNSA for Keeping High Level Nuclear Safety: The Corner Stone of the Nuclear Safety Regulation Edifice

International Nuclear Information System (INIS)

Hu, L.

2016-01-01

Facing the fast development of the nuclear power industry and the application of radioactive sources, The MEP(NNSA) is endeavoured to promoting its competency, including: complementing the law system, training and recruiting staff to keep a capable team, constructing the R&D base to keep the basic capability, promoting safety culture both for the industry and the regulator. After the Fukushima nuclear accident, the MEP(NNSA) planned to construct R&D base, in which the Platform Nuclear Safety Monitoring and Emergency Responding, the Platform of Safety Technology of PWR Testing, the Laboratory of Safety Management Technology of Nuclear Waste Verification, the Laboratory of Environmental Radiation Monitoring and the Center of International Cooperation are included. On the other hand, the MEP(NNSA) issued Chinese nuclear safety culture policy declaration in 2014, and carried out a large scale Specialized Action for Nuclear Safety Promotion to promote the nuclear safety culture both for the industry and herself. For the nuclear regulator, It is essential to conduct the competence promoting by both “hardware” and “software”, the former is the material foundation of regulation authority, which will be effectively functioning under the facilitating of the latter. (author)

Safety evaluation and regulation of chemicals. 2. Impact of regulations - improvement of methods

Energy Technology Data Exchange (ETDEWEB)

Homburger, F [ed.

1985-01-01

This volume assesses the impact of new scientific knowledge on the testing and regulation of chemicals, including food additives, drugs, cosmetics, pesticides, and other commercial substances. Apart from describing the newest tests, regulations, and risk assessment strategies, chapters reflect changes forced by both the growing need for cost containment and the mounting pressure to find alternatives to animal testing. Based on an international congress, the book also brings the advantage of diversity in the background and nationality of the authors, thus allowing a view of central problems according to the different interests of academics, industry scientists, government scientists, and regulators. The book opens with coverage of national and international regulations designed to prevent and control damage to human health and the environment. Topics range from basic problems of policy design and enforcement to the specific requirements for chemical regulation in developing countries. The next chapters cover new tests, systems, and assays used in in vivo safety testing. Readers will find a critical assessment of tests used to determine teratogenicity, mutagenicity, carcinogenicity, neurotoxicity and chemical lethality. Other topics include factors operating in the public perception of chemical hazards, guidelines for decision making in the management and regulation of risks, and future trends in the methodology of safety evaluation. The volume concludes with an overview of in vitro methods for testing hepatotoxicity. Several short-term in vitro test models and limited in vivo bioassays are presented and evaluated in terms of their capacity to substitute for long-term animal studies. Expert and thorough in its coverage, the book offers a wealth of technical and practical information for toxicologists, pharmacologists, industrial policy makers, and government regulators. (orig.). With 67 figs., 34 tabs.

Knowledge Management for Safety Regulators: Cooperation to Achieve a Much Needed Product

International Nuclear Information System (INIS)

Mallick, S.

2016-01-01

Full text: Knowledge management (KM) has been identified by a number of IAEA documents as one of the key factors that can contribute to the safe and efficient operation of nuclear facilities in Member States. The IAEA Strategic Approaches to Education and Training in Nuclear and Radiation, Transport and Waste Safety identify and underline KM as an important line of action for effective national and organizational strategies in education and training. The capacity building “umbrella concept”, developed within the Action Plan in Nuclear Safety, also recognizes KM as one of the main four pillars (Education and Training, Human Resource Development, Knowledge Management and Knowledge Networks) of capacity building. Within existing IAEA publications, there is currently no specific practical guidance on how to develop and implement KM programmes for regulators. As such, in 2014, the IAEA Steering Committee on Regulatory Capacity Building and Knowledge Management requested the IAEA to develop a publication providing such practical guidance. The objective of the publication is to provide practical guidance to Member States on how to plan, establish and maintain an effective safety KM programme for regulators of facilities and activities. The report will identify benefits and uses of KM by regulators and will describe how a regulator could use KM in support of its functions. This presentation will provide an overview of the Knowledge Management for Safety Regulators document while highlighting the cross-departmental cooperation (i.e., NS and NE) used in its development. Furthermore, this presentation will provide insight into the challenges currently being faced by safety regulators vis-à-vis KM programmes and present potential paths forward with respect to the definition of efficient and effective KM indicators. (author

Study on the development of safety regulations for geological disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Wei Fangxin

2012-01-01

The development of regulations under Regulations on Safety Management of Radioactive Waste has become necessary as the issuance of it. The regulations related to geological disposal of high-level radioactive waste can promote the progress of research and development on geological disposal of high-level radioactive waste in China. This paper has present suggestions on development of regulations on geological disposal of high-level radioactive waste by analyzing development of safety regulations on geological disposal of high-level radioactive waste in foreign countries and problems occurred in China and discussed important issues related to the development of safety regulations on geological disposal of high-level radioactive waste. (author)

Safety regulation for the design approval of special form radioactive sources

International Nuclear Information System (INIS)

Cho, Woon-Kap

2009-01-01

Several kinds of special form radioactive sources for industrial, medical applications are being produced in Korea. Special form radioactive sources should meet strict safety requirements specified in the domestic safety regulations and the design of the sources should be certified by the regulatory authority, the Ministry of Education, Science and Technology (MEST). Several safety tests such as impact, percussion, heating, and leak tests are performed on the sources according to the domestic regulations and the international safety standards such as ANSI N542-1977 and ISO 2919-1999(E). As a regulatory expert body, Korea Institute of Nuclear Safety (KINS) assesses various types of application documents, such as safety analysis report, quality assurance program, and other documents evidencing fulfillment of requirements for design approval of the special form radioactive sources, submitted by a legal person who intends to produce special form radioactive sources and then reports the assessment result to MEST. A design approval certificate is issued to the applicant by MEST on the basis of a technical evaluation report presented by KINS.

A comparison of some Mexican/U.S. safety regulations

Energy Technology Data Exchange (ETDEWEB)

Bunner, W.R. [Training Associates, Columbus, OH (United States)

1994-12-31

In the US, safety and hygiene began to be enforced broadly with the formation of the US Department of Labor`s, Occupational Safety and Health Administration (OSHA) in 1970. In Mexico, the 1917 Constitution required companies to protect their workers against safety and hygiene hazards in the workplace. Additional requirements were added with the Federal Labor Law of 1931. General safety and hygiene regulations were added in 1934. Modern-day federal labor law in Mexico requires the creation of mixed safety and hygiene commissions in all industries. However, only about 114,000 workplaces have registered mixed commissions. In a similar vein, the most favored OSHA reform bill in the US proposes to require safety and health committees in all work places. At this time such committees are common in larger companies but not in smaller ones.

CONFORMITY TO OCCUPATIONAL SAFETY AND HEALTH REGULATIONS IN MALAYSIAN SMALL AND MEDIUM ENTERPRISES

OpenAIRE

Baba Md Deros; Ahmad Rasdan Ismail; Jaharah A. Ghani; Mohd Yusri Mohd Yusof

2014-01-01

Regulation on occupational safety and health in Malaysia had evolved from the prescriptive factory and machinery act to a self-regulated occupational safety and health act. However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by Small and Medium Enterprises (SMEs). The two main objectives of this study are: First, first, to identify and determine the level of conformity and second...

Framework for applying probabilistic safety analysis in nuclear regulation

International Nuclear Information System (INIS)

Dimitrijevic, V.B.

1997-01-01

The traditional regulatory framework has served well to assure the protection of public health and safety. It has been recognized, however, that in a few circumstances, this deterministic framework has lead to an extensive expenditure on matters hat have little to do with the safe and reliable operation of the plant. Developments of plant-specific PSA have offered a new and powerful analytical tool in the evaluation of the safety of the plant. Using PSA insights as an aid to decision making in the regulatory process is now known as 'risk-based' or 'risk-informed' regulation. Numerous activities in the U.S. nuclear industry are focusing on applying this new approach to modify regulatory requirements. In addition, other approaches to regulations are in the developmental phase and are being evaluated. One is based on the performance monitoring and results and it is known as performance-based regulation. The other, called the blended approach, combines traditional deterministic principles with PSA insights and performance results. (author)

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan.

Science.gov (United States)

Ko, Wen-Hwa

2015-12-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry. Copyright © 2015. Published by Elsevier B.V.

The Role of the Regulator in the Field of Safety Culture to Shun Nuclear Accident

International Nuclear Information System (INIS)

Kandil, M.M.

2016-01-01

The 2011 accident at the Fukushima Daiichi nuclear power plant in Japan has, as might be expected, led to improvements in equipment at plants around the world that have fortified safety systems and allowed for better protection against rare, extreme natural events. Equally important to the process of improving nuclear safety is the emphasis placed on implementing quality improvements to the human side of nuclear safety, a crucial element that is often not considered by those outside the nuclear sector. Ensuring nuclear reactor safety is not only a question of physical protection against all credible threats, enhancing robustness of important safety systems and increasing redundancy of back-up power and water cooling systems, but also one of making certain that qualified and trained staff are supported by effective procedures. However, these assets are valued only in an organizational culture that places a premium on ensuring high levels of safety, or implementing what is called an effective “nuclear safety culture”. Principles, characteristics and factors for effective safety culture are to great extent similar between licencees and regulatory bodies and can be applied for developing RB’s safety. Safety is the primary purpose of the regulatory body, Regulator plays a significant role in the field of nuclear safety even though the prime responsibility for safety belongs to the operator, and it is the regulator which actually decides what is considered to be safe. In order to effectively implement the international principle of high level of nuclear safety, nuclear safety culture should be clearly named as an objective in international nuclear legal acts and the regulator’s responsibility for promotion of nuclear safety culture should be established. What is more difficult for the regulator is finding the right balance of firmness but fairness in dealing with the operator. In addition to enforcing safety regulations, the regulator should have a positive

Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

OpenAIRE

Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

2013-01-01

Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

Safety valve including a hydraulic brake and hydraulic brake that could be fitted into a valve

International Nuclear Information System (INIS)

Chabat-Courrede, Jean.

1981-01-01

Making of a safety valve that can be fitted to a containment vessel filled with a non compressible fluid, such as the water system of a nuclear power station. It includes a hydraulic brake located between the valve and the elastic means, close to the valve which completely suppresses the high frequency oscillations of the equipment [fr

The global nitrogen regulator, FNR1, regulates fungal nutrition-genes and fitness during Fusarium oxysporum pathogenesis.

Science.gov (United States)

Divon, Hege Hvattum; Ziv, Carmit; Davydov, Olga; Yarden, Oded; Fluhr, Robert

2006-11-01

SUMMARY Fusarium oxysporum is a soil-borne pathogen that infects plants through the roots and uses the vascular system for host ingress. Specialized for this route of infection, F. oxysporum is able to adapt to the scarce nutrient environment in the xylem vessels. Here we report the cloning of the F. oxysporum global nitrogen regulator, Fnr1, and show that it is one of the determinants for fungal fitness during in planta growth. The Fnr1 gene has a single conserved GATA-type zinc finger domain and is 96% and 48% identical to AREA-GF from Gibberella fujikuroi, and NIT2 from Neurospora crassa, respectively. Fnr1 cDNA, expressed under a constitutive promoter, was able to complement functionally an N. crassa nit-2(RIP) mutant, restoring the ability of the mutant to utilize nitrate. Fnr1 disruption mutants showed high tolerance to chlorate and reduced ability to utilize several secondary nitrogen sources such as amino acids, hypoxanthine and uric acid, whereas growth on favourable nitrogen sources was not affected. Fnr1 disruption also abolished in vitro expression of nutrition genes, normally induced during the early phase of infection. In an infection assay on tomato seedlings, infection rate of disruption mutants was significantly delayed in comparison with the parental strain. Our results indicate that FNR1 mediates adaptation to nitrogen-poor conditions in planta through the regulation of secondary nitrogen acquisition, and as such acts as a determinant for fungal fitness during infection.

The safety regulation of small-scale coal mines in China: Analysing the interests and influences of stakeholders

International Nuclear Information System (INIS)

Song, Xiaoqian; Mu, Xiaoyi

2013-01-01

Small scale coal mines (SCMs) have played an important role in China’s energy supply. At the same time, they also suffer from many social, economic, environmental, and safety problems. The Chinese government has made considerable efforts to strengthen the safety regulation of the coal mining industry. Yet, few of these efforts have proven to be very effective. This paper analyzes the interests and influences of key stakeholders in the safety regulation of SCMs, which includes the safety regulator, the local government, the mine owner, and mineworkers. We argue that the effective regulation of coal mine safety must both engage and empower mineworkers. - Highlights: ► Small scale coal mines have played an important role in China's energy supply. ► We analyze the interests and influences of key stakeholders in the safety regulation of small coal mines. ► The mineworkers have the strongest interest but least influence. ► An effective regulation must engage the mineworkers, organize, and empower them.

NRC safety research in support of regulation--FY 1989

International Nuclear Information System (INIS)

1990-04-01

This report, the fifth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1989. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1991

International Nuclear Information System (INIS)

1992-04-01

This report, the seventh in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1991. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

NRC safety research in support of regulation, FY 1990

International Nuclear Information System (INIS)

1991-04-01

This report, the sixth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1990. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

Safety regulation: The lessons of workplace safety rule management for managing the regulatory burden

OpenAIRE

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal regulations and reduce the regulatory burden. The authors were commissioned to prepare a discussion paper on this issue by the Mercatus Center of George Mason University in Arlington, Virginia, aimed pa...

NRC - regulator of nuclear safety

International Nuclear Information System (INIS)

1997-01-01

The U.S. Nuclear Regulatory Commission (NRC) was formed in 1975 to regulate the various commercial and institutional uses of nuclear energy, including nuclear power plants. The agency succeeded the Atomic Energy Commission, which previously had responsibility for both developing and regulating nuclear activities. Federal research and development work for all energy sources, as well as nuclear weapons production, is now conducted by the U.S. Department of Energy. Under its responsibility to protect public health and safety, the NRC has three principal regulatory functions: (1) establish standards and regulations, (2) issue licenses for nuclear facilities and users of nuclear materials, and (3) inspect facilities and users of nuclear materials to ensure compliance with the requirements. These regulatory functions relate to both nuclear power plants and to other uses of nuclear materials - like nuclear medicine programs at hospitals, academic activities at educational institutions, research work, and such industrial applications as gauges and testing equipment. The NRC places a high priority on keeping the public informed of its work. The agency recognizes the interest of citizens in what it does through such activities as maintaining public document rooms across the country and holding public hearings, public meetings in local areas, and discussions with individuals and organizations

Classification of research reactors and discussion of thinking of safety regulation based on the classification

International Nuclear Information System (INIS)

Song Chenxiu; Zhu Lixin

2013-01-01

Research reactors have different characteristics in the fields of reactor type, use, power level, design principle, operation model and safety performance, etc, and also have significant discrepancy in the aspect of nuclear safety regulation. This paper introduces classification of research reactors and discusses thinking of safety regulation based on the classification of research reactors. (authors)

Advisory material for the IAEA regulations for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2008-01-01

Since the first edition in 1961, the Regulations for the Safe Transport of Radioactive Material of the IAEA (IAEA Regulations) have served as the basis of safety for the transport of radioactive material worldwide. In the discussions leading to the first edition of the IAEA Regulations, it was realized that there was need for a publication to supplement the Regulations which could give information of individual provisions as to their purpose, their scientific background and how to apply them in practice. In response, the Agency published Safety Series No. 7, entitled, in its first edition in 1961, 'Notes on Certain Aspects of the Regulations'. An additional source of information on the Regulations, providing advice on 'how' the user should comply with them which could be augmented from time to time in the light of latest experience, was provided by the Agency, initially in relation to the 1973 edition of the Regulations. This was entitled 'Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material' and designated Safety Series No. 37. This document is the result of combining the two Safety Series in a single publication. Thus the primary purpose of this publication is to provide guidance to users on proven and acceptable ways of complying with the Regulations. This Advisory Material is not a stand-alone text and it only has significance when used as a companion to the IAEA Safety Standards Series No. ST-1, Regulations for the Safe Transport of Radioactive Material (1996 edition)

48 CFR 752.7033 - Physical fitness.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Physical fitness. 752.7033 Section 752.7033 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CLAUSES AND... fitness. For use in all USAID contracts involving performance overseas. Physical Fitness (JUL 1997) (The...

Safety practice and regulations in different IGORR member countries

International Nuclear Information System (INIS)

Hickman, C.; Minguet, J.L.; Arnould, F.

1999-01-01

In the suggestions of the 1996 IGORR 5 conference, Technicatome proposed 'Comparing Regulations for Research Reactors in Participating Countries'. The aim was to enhance and facilitate the dissemination of pertinent information amongst potential utilities of operational research reactors. A questionnaire on the following topics was subsequently sent out to IGORR 5 participants : Procedures for Research Reactors and Associated Equipment, Safety Analysis, Safety Related Components, Radiation Protection and Management of Nuclear materials. The objective of the present paper is to identify major trends, similarities and differences in the approaches adopted by different countries. Its scope has been limited to: Licensing and Regulatory approach; Operating and Safety documents; Safety Analysis; Radiological Safety; Management of Nuclear Materials. The investigations carried out indicate that to a large extent international recommendations (IAEA, ICPR,..) are being followed and that there is a general tendency to integrate them into national legislation and regulations. Although Safety Culture varies from one country to another an overall general consensus exists on the basic approach to safety inasmuch as: different countries have their own legally defined Safety Authorities, a Preliminary Safety Report is required before a research reactor can be built, and a final Safety Report before the core can be loaded with nuclear fuel and the reactor made critical; these documents must be accepted by the Safety Authorities concerned; a combination of defense-in-depth strategy (deterministic approach) and probabilistic analysis is applied; three or more safety classes are used to categorize systems and components; the single failure criterion is taken into consideration for systems and components having safety functions; both Operating Basis and Safety Shutdown type earthquakes are considered; the crashing of an aircraft onto a research reactor is taken into consideration

Fitness for service - A continuing challenge

International Nuclear Information System (INIS)

McGonnagle, W.J.

1983-01-01

Fitness for service, as defined by this author, is the ability of a material, component, or system - the product - to perform its designated function. A fitness for service program promotes quality, assures reliability, enhances confidence and improves the safety of products - which is crucial in a critical industry as nuclear energy. Fitness for service necessitates strict adherence to and conformance with all safety and quality requirements. In short, the product must perform its designated function, under designated operational and environmental conditions, for a designated period of time

Nuclear safety regulation in the People's Republic of China

International Nuclear Information System (INIS)

Shi Guangchang

1987-01-01

The present report gives a general view of how the problem of nuclear safety is dealt with in China, with particular reference to the nuclear power plants. The most relevant nuclear legal regulations and procedures are reported. Organization of the National Nuclear Safety Administration (NNSA) of China and its working activities are presented. The report gives also the principle and practice with regard to licensing process and regulatory inspection of nuclear power plant in China. (author)

International Nuclear Officials Discuss IAEA Peer Reviews of Nuclear Safety Regulations

International Nuclear Information System (INIS)

2011-01-01

Full text: Senior nuclear regulators today concluded a Workshop on the Lessons Learned from the IAEA Integrated Regulatory Review Service (IRRS) Missions. The U.S. Nuclear Regulatory Commission (NRC) hosted the workshop, in cooperation with the International Atomic Energy Agency, in Washington, DC, from 26 to 28 October 2011. About 60 senior regulators from 22 IAEA Member States took part in this workshop. The IRRS programme is an international peer review service offered by the IAEA to its Member States to provide an objective evaluation of their nuclear safety regulatory framework. The review is based on the internationally recognized IAEA Safety Standards. ''The United States Nuclear Regulatory Commission was pleased to host the IAEA's IRRS meeting this week. The discussions over the past three days have provided an important opportunity for regulators from many countries to come together to strengthen the international peer review process,'' said U.S. NRC Chairman Gregory B. Jaczko. ''Especially after the Fukushima Daiichi accident, the global community recognizes that IRRS missions fill a vital role in strengthening nuclear safety and security programs around the world, and we are proud to be a part of this important effort.'' The IAEA Action Plan on Nuclear Safety includes actions focused towards strengthening the existing IAEA peer reviews, incorporating lessons learned and improving their effectiveness. The workshop provided a platform for the exchange of information, experience and lessons learned from the IRRS missions, as well as expectations for the IRRS programme for the near future. Further improvements in the planning and implementation of the IRRS missions in the longer term were discussed. A strong commitment of all relevant national authorities to the IRRS programme was identified as a key element of an effective regulatory framework. The conclusions of the workshop will be issued in November 2011 and the main results will be reported to the IAEA

Trends in food safety standards and regulation implications for developing countries

OpenAIRE

Caswell, Julie A.

2003-01-01

"Food safety is affected by the decisions of producers, processors, distributors, food service operators, and consumers, as well as by government regulations. In developed countries, the demand for higher levels of food safety has led to the implementation of regulatory programs that address more types of safety-related attributes (such as bovine spongiform encephalopathy (BSE), microbial pathogens, environmental contaminants, and animal drug and pesticide residues) and impose stricter standa...

Study of different fitness functions with safety restriction for nuclear reactor reload problem using QDPSO

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Paulo C. de, E-mail: paulocaixeta@poli.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Departamento de Engenharia Nuclear; Lima, Alan M.M. de; Schirru, Roberto, E-mail: alan@lmp.ufrj.br, E-mail: schirru@lmp.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil)

2015-07-01

Nuclear Reactor Reload Problem (NRRP) is a classical problem in Nuclear Engineering that has been studied for more than 40 years, which focuses on the economics and safety of the Nuclear Power Plant (NPP). This problem consists in searching for the best loading pattern of fuel assemblies (FA) in the core, aiming to determine the permutation of fuel assemblies that optimizes the uranium utilization, with fitness function evaluated according to specific criteria and methods of nuclear reactor physics, such as the maximum mean power peak and the boron concentration. In this article will be presented different methodologies to obtain a representative fitness function for NRRP, where Quantum particle Swarm optimization (QPSO) was used to determine which one gives the best array of fuel assemblies that will make the maximum EFPD (Effective Full Power Days) with the least computational effort. In this approach, as well as others in literature, was not used Burnable Poison in the simulations and the results will be compared in relation of the maximization of the cycle length considering the boron concentration yield by the reactor physics code, to make sure that the configuration is valid from a safety point of view. This paper was based on Angra 1's seventh reload cycle. (author)

[Problems of safety regulation under radioactive waste management in Russia].

Science.gov (United States)

Monastyrskaia, S G; Kochetkov, O A; Barchukov, V G; Kuznetsova, L I

2012-01-01

Analysis of the requirements of Federal Law N 190 "About radioactive waste management and incorporation of changes into some legislative acts of the Russian Federation", as well as normative-legislative documents actual and planned to be published related to provision of radiation protection of the workers and the public have been done. Problems of safety regulation raised due to different approaches of Rospotrebnadzor, FMBA of Russia, Rostekhnadzor and Minprirody with respect to classification and categorization of the radioactive wastes, disposal, exemption from regulatory control, etc. have been discussed in the paper. Proposals regarding improvement of the system of safety regulation under radioactive waste management and of cooperation of various regulatory bodies have been formulated.

Integrating environmental management into food safety and food packaging in Malaysia: review of the food regulation 1985

Science.gov (United States)

Nordin, N. H.; Hara, H.; Kaida, N.

2017-05-01

Food safety is an important issue that is related to public safety to prevent the toxicity threats of the food. Management through legal approach has been used in Malaysia as one of the predominant approaches to manage the environment. In this regard, the Food Regulation 1985 has been one of the mechanisms of environmental management through legal approach in controlling the safety of packaged food in food packaging industry in Malaysia. The present study aims to analyse and to explain the implementation of the Food Regulation 1985 in controlling the safety of packaged food in Malaysia and to integrate the concept of environmental management into the food safety issue. Qualitative analysis on the regulation document revealed that there are two main themes, general and specific, while their seven sub themes are included harmful packages, safety packages, reuse packages, polyvinyl chloride (PVC), alcoholic bottle, toys, money and others and iron powder. The implementation of the Food Regulation 1985 in controlling the safety of packaged food should not be regarded solely for regulation purposes but should be further developed for a broader sense of food safety from overcoming the food poisoning.

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

1 janv. 2006 ... Environmental Regulation and Food Safety intéressera les artisans des politiques et les ONG , les chercheurs et les spécialistes de l'économie ... This funding will help strengthen the Science, Technology and Innovation Policy Research Organization's (STIPRO) role as a credible public policy institution in ...

Safety management and control policy. A study of the safety regulation of offshore oil activity by the Norwegian Petroleum Directorate. Sikkerhetsstyring og reguleringsteknikk. Oljedirektoratets regulering av sikkerheten ved produksjon av petroleum

Energy Technology Data Exchange (ETDEWEB)

Graver, H P

1983-01-01

The Norwegian Petroleum Directorate (NPD) is the main administrative body with responsibility to regulate and control the safety aspects of drilling for and production of petroleum on the Norwegian Continental Shelf. Its responsibility does not, however, include the aspects of maritime safety, which are regulated by the Norwegian Maritime Directorate. This study is limited to the regulation of safety on fixed installations for production of petroleum. The object has been to describe the methods applied by the NPD to achieve better safety, and to give answers to why these specific methods of approach have developed as they have. A conclusion that may be drawn from this study is that there exists a relationship of close cooperation between the NPD and the oil industry represented by the operating companies. Only this can explain the differences we find in the NPD approach as compared to the approach of other parts of public administration. Such a relationship probably leads to better safety within the scope of technical rationality than would have a more hostile relationship between the Directorate and the industry. This has its price, however. Aspects of the safety question not included within the limits of a purely technical approach are not as easily taken into account. Partly due to this fact, other parties with interests in safety are not represented.

Safety regulation : The lessons of workplace safety rule management for managing the regulatory burden

NARCIS (Netherlands)

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal

Co-operative development of nuclear safety regulations, guides and standards based on NUSS

International Nuclear Information System (INIS)

Pachner, J.; Boyd, F.C.; Yaremy, E.M.

1985-01-01

A major need of developing Member States building nuclear power plants (NPPs) of foreign origin is to acquire a capability to regulate such nuclear plants independently. Among other things, this requires the development of national nuclear safety regulations, guides and standards to govern the development and use of nuclear technology. Recognizing the importance and complexity of this task, it seems appropriate that the NPP-exporting Member States share their experience and assist the NPP-importing Member States in the development of their national regulations and guides. In 1983, the Atomic Energy Control Board and Atomic Energy of Canada Ltd. conducted a study of a possible joint programme involving Canada, an NPP-importing Member State and the IAEA for the development of the national nuclear safety regulations and guides based on NUSS documents. During the study, a work plan with manpower estimates for the development of design regulations, safety guides and a guide for regulatory evaluation of design was prepared as an investigatory exercise. The work plan suggests that a successful NUSS implementation in developing Member States will require availability of significant resources at the start of the programme. The study showed that such a joint programme could provide an effective mechanism for transfer of nuclear safety know-how to the developing Member States through NUSS implementation. (author)

Radiation sources safety and radioactive materials security regulation in Ukraine

International Nuclear Information System (INIS)

Smyshliaiev, A.; Holubiev, V.; Makarovska, O.

2001-01-01

Radiation sources are widely used in Ukraine. There are about 2500 users in industry, science, education and about 2800 in medicine. About 80,000 sealed radiation sources with total kerma-equivalent of 450 Gy*M 2 /sec are used in Ukraine. The exact information about the radiation sources and their users will be provided in 2001 after the expected completion of the State inventory of radiation sources in Ukraine. In order to ensure radiation source safety in Ukraine, a State System for regulation of activities dealing with radiation sources has been established. The system includes the following elements: establishment of norms, rules and standards of radiation safety; authorization activity, i.e. issuance of permits (including those in the form of licences) for activities dealing with radiation sources; supervisory activity, i.e. control over observance of norms, rules and standards of radiation safety and fulfilment of conditions of licences for activities dealing with radiation sources, and also enforcement. Comprehensive nuclear legislation was developed and implemented from 1991 to 2000. Radiation source safety is regulated by three main nuclear laws in Ukraine: On the use of nuclear energy and radiation safety (passed on 8 February 1995); On Human Protection from Impact of Ionizing Radiation (passed on 14 January 1998); On permissive activity in the area of nuclear energy utilization (passed on 11 January 2000). The regulatory authorities in Ukraine are the Ministry for Ecology and Natural Resources (Nuclear Regulatory Department) and the Ministry of Health (State sanitary-epidemiology supervision). According to the legislation, activities dealing with radiation sources are forbidden without an officially issued permit in Ukraine. Permitted activities with radiation sources are envisaged: licensing of production, storage and maintenance of radiation sources; licensing of the use of radiation sources; obligatory certification of radiation sources and transport

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

Science.gov (United States)

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

Challenges in developing competency-based training curriculum for food safety regulators in India

Directory of Open Access Journals (Sweden)

Anitha Thippaiah

2014-01-01

Full Text Available Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1 Identify the competencies needed among the food regulatory workforce in India. 2 Develop a competency-based training curriculum for food safety regulators in the country. 3 Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level, II and III (Retail/ Catering/ Manufacturing were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

Basic concept on safety regulation for land disposal of low level radioactive solid wastes

International Nuclear Information System (INIS)

1985-01-01

As to the land disposal of low level radioactive solid wastes, to which the countermeasures have become the urgent problem at present, it is considered to be a realistic method to finally store the solid wastes concentratedly outside the sites of nuclear power stations and others, and effort has been exerted by those concerned to realize it. Besides, as for extremely low level radioactive solid wastes, the measures of disposing them corresponding to the radioactivity level are necessary, and the concrete method has been examined. The Committee on Safety Regulation for Radioactive Wastes has discussed the safety regulation for those since April, 1984, and the basic concept on the safety regulation was worked up. It is expected that the safety of the land disposal of low level radioactive solid wastes can be ensured when the safety regulation is carried out in conformity with this basic concept. The present status of the countermeasures to the land disposal of low level radioactive solid wastes is shown. As the concrete method, the disposal in shallow strate has been generally adopted. At present, the plan for the final storage in Aomori Prefecture is considered, and it will be started with the first stage of four-stage control. (Kako, I.)

Fitness for duty in the nuclear power industry: A review of technical issues

International Nuclear Information System (INIS)

Barnes, V.; Fleming, I.; Grant, T.

1988-09-01

This report presents information gathered and analyzed in support of the United States Nuclear Regulatory Commission's (NRC's) efforts to develop a rule that will ensure that workers with unescorted access to protected areas in nuclear power plants are fit for duty. The primary potential fitness-for-duty concern addressed in the report is impairment caused by substance abuse, although other sources of impairment on the job are discussed. The report examines the prevalence of fitness-for-duty problems and discusses the use and effects of illicit drugs, prescription drugs, over-the-counter preparations and alcohol. The ways in which fitness-for-duty concerns are being addressed in both public- and private-sector industries are reviewed, and a description is provided of fitness-for-duty practices in six organizations that, like the nuclear industry, are regulated and whose operations can affect public health and safety. Methods of ensuring fitness for duty in the nuclear industry are examined in detail. The report also addresses methods of evaluating the effectiveness of fitness-for-duty programs in the nuclear power industry

JICST Factual DatabaseJICST Chemical Substance Safety Regulation Database

Science.gov (United States)

Abe, Atsushi; Sohma, Tohru

JICST Chemical Substance Safety Regulation Database is based on the Database of Safety Laws for Chemical Compounds constructed by Japan Chemical Industry Ecology-Toxicology & Information Center (JETOC) sponsored by the Sience and Technology Agency in 1987. JICST has modified JETOC database system, added data and started the online service through JOlS-F (JICST Online Information Service-Factual database) in January 1990. JICST database comprises eighty-three laws and fourteen hundred compounds. The authors outline the database, data items, files and search commands. An example of online session is presented.

77 FR 6007 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2012-02-07

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... they could be published in the Federal Register. This notice lists temporary safety zones, security... the safety and security needs within their jurisdiction; therefore, District Commanders and COTPs have...

Duty and role of Nuclear Regulation Authority facing a crucial moment

International Nuclear Information System (INIS)

Asaoka, Mie

2013-01-01

Duty of Nuclear Regulation Authority (NRA) was to restore public trust on nuclear regulation spoiled by the Fukushima nuclear accident. How applied such regulation as mandatory back-fitting based on latest knowledge and 40 year operational limit in principle became of great concern. Active faults issue on existing nuclear power station could be a touchstone. Safety side judgment and electric utilities side's proof responsibilities were required as more stringent criteria for active faults. The expert group had been working on assessment of fracture zones under the field survey. Reform of safety regulations should be done based on three important standpoints: (1) not business easiness but public safety was first (2) NRA keeping stance to judge its own safety standard and how NRA ought to be and (3) importance of public disclosure of information and participation in decision-making judging from greatness of public effects caused by nuclear disaster. (T. Tanaka)

33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

Science.gov (United States)

2010-07-01

..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and Security... section are designated as regulated navigation areas. (2) Safety and security zones. All waters within a...

International experts conclude IAEA peer review of Iran's safety regulation of Bushehr NPP

International Nuclear Information System (INIS)

2010-01-01

Full text: An international team of nuclear safety experts today completed an IAEA mission to review the effectiveness of Iran's safety regulation of its first nuclear power plant and to identify possible improvements before the plant begins operation. Upon invitation of the Islamic Republic of Iran, the International Atomic Energy Agency (IAEA) assembled a team of senior regulators from seven Member States for an Integrated Regulatory Review Service (IRRS) mission. The scope of the mission was limited to the safety regulation of Bushehr nuclear power plant (BNPP-1). The IRRS review took place from 20 February to 2 March at the INRA offices in Tehran and included a technical visit to the BNPP-1 site. The mission was an objective peer review based on IAEA safety standards, and was neither an inspection, nor an audit. Ms. Olena Mykolaichuk, IRRS Team Leader and Head of the State Nuclear Regulatory Committee of Ukraine, commended her INRA counterparts: 'The regulatory work performed on the Bushehr construction and in preparation for commissioning has demonstrated significant progress of INRA as a nuclear regulatory authority,' she said. Philippe Jamet, Director of the IAEA's Nuclear Installation Safety Division, added: 'Through this IRRS mission, both Iran and the international experts contribute to the enhancement of nuclear safety and worldwide experience sharing.' In the course of its review the IRRS team identified the following strengths: - INRA has a dedicated, conscientious staff, demonstrating clear commitments to further improvements. - INRA clearly recognizes the value of peer reviews and international cooperation regarding nuclear safety. - Despite a shortage of staff, INRA demonstrated strong leadership while performing both review and assessment and inspection tasks during the BNPP-1 construction and pre-commissioning. - INRA has developed an excellent computerized documentation control system. Recommendations and suggestions to improve INRA's regulatory

Regulation of Aging Power Plants: Ensuring Safety in a Changing Environment

International Nuclear Information System (INIS)

Jackson, S.A.

1999-01-01

In her keynote address to the Plim and Plex 1997 Conference, Dr. Jackson, President of the US Nuclear Regulatory Commission, dealt with four problem areas: (i) the development and application of safety margins; (ii) aging mechanisms and the use of inspection and testing methods; (iii) the U. S. licence renewal process; and (iv) risk-informed, performance-based regulation. Aging effects can further complicate existing interactions between 'explicit' and 'implicit' safety margins. Attempting to satisfy these combined margins can have a significant technical and financial impact on the plant operator. Aging degradation affects a broad range of plant systems, structures and components. Inspection and testing methods are improved continually, but development of methods for direct measuring of material properties on a more microscopic level together with elaboration of more precise predictive models of aging is still needed. In the U. S., the decision on whether to seek licence renewal rests with the licensee. The NRC task is to establish a reasonable process and clear safety standards. License renewal (extension of a NPP 40-years operating licence for additional 20 years) is explicitly allowed in NRS regulations in 10 CFR Part 54. In the U. S. nuclear power industry, there is considerable interest in licence renewal. A 'risk informed' approach to regulation means that, in the decision-making, the risk information is considered along with other factors. Performance-based regulation is, by definition, results focused; its essential component is the feedback of operating experience into subsequent evaluation. When the results focus is linked to risk analysis and ranking, the result is risk-informed, performance-based regulation. The NRS applies this combined approach in all its activities and, also, in its collaborative programs with the nuclear power industry. At the threshold of the 21st century, the nuclear power industry faces an array of challenges and opportunities

The influence of the internalization of emotional regulation on mental health among the Taiwanese people: the moderating effect of cultural fit.

Science.gov (United States)

Chu, Li-Chuan

2015-03-01

This study used a 2-stage questionnaire survey to explore whether self-regulation by withholding negative emotions (SRWNE) affects mental health and examines further whether cultural fit can moderate the relationship between SRWNE and mental health. The 2-stage studies used data collected from 405 (time 1) and 313 (time 2) full-time staff employed by private and public enterprises in Taiwan. The author tested hypotheses through the use of hierarchical multiple regression. The results showed that controlled SRWNE through external regulation and introjected regulation is significantly associated positively with somatic symptoms, anxiety and insomnia, social dysfunction, and severe depression, whereas autonomous SRWNE through identified regulation is significantly associated negatively with anxiety and insomnia, and social dysfunction. In addition, this study also found that cultural fit may moderate the relationship between SRWNE or introjected regulation and identified regulation and the mental health indicators. © 2012 APJPH.

GENERAL CONSIDERATIONS ON REGULATIONS AND SAFETY REQUIREMENTS FOR QUADRICYCLES

Directory of Open Access Journals (Sweden)

Ana Pavlovic

2015-12-01

Full Text Available In recent years, a new class of compact vehicles has been emerging and wide-spreading all around Europe: the quadricycle. These four-wheeled motor vehicles, originally derived from motorcycles, are a small and fuel-efficient mean of transportation used in rural or urban areas as an alternative to motorbikes or city cars. In some countries, they are also endorsed by local authorities and institutions which support small and environmentally-friendly vehicles. In this paper, several general considerations on quadricycles will be provided including the vehicle classification, evolution of regulations (as homologation, driver licence, emissions, etc, technical characteristics, safety requirements, most relevant investigations, and other additional useful information (e.g. references, links. It represents an important and actual topic of investigation for designers and manufacturers considering that the new EU regulation on the approval and market surveillance of quadricycles will soon enter in force providing conclusive requirements for functional safety environmental protection of these promising vehicles.

Regulation of chemical safety at fuel cycle facilities by the United States Nuclear Regulatory Commission

International Nuclear Information System (INIS)

Ramsey, Kevin M.

2013-01-01

When the U.S. Nuclear Regulatory Commission (NRC) was established in 1975, its regulations were based on radiation dose limits. Chemical hazards rarely influenced NRC regulations. After the Three Mile Island reactor accident in 1979, the NRC staff was directed to address emergency planning at non-reactor facilities. Several fuel cycle facilities were ordered to submit emergency plans consistent with reactor emergency plans because no other guidance was available. NRC published a notice that it was writing regulations to codify the requirements in the Orders and upgrade the emergency plans to address all hazards, including chemical hazards. The legal authority of NRC to regulate chemical safety was questioned. In 1986, an overfilled uranium hexafluoride cylinder ruptured and killed a worker. The NRC staff was directed to address emergency planning for hazardous chemicals in its regulations. The final rule included a requirement for fuel cycle facilities to certify compliance with legislation requiring local authorities to establish emergency plans for hazardous chemicals. As with emergency planning, NRC's authority to regulate chemical safety during routine operations was limited. NRC established memoranda of understanding (MOUs) with other regulatory agencies to encourage exchange of information between the agencies regarding occupational hazards. In 2000, NRC published new, performance-based, regulations for fuel cycle facilities. The new regulations required an integrated safety analysis (ISA) which used quantitative standards to assess chemical exposures. Some unique chemical exposure cases were addressed while implementing the new regulations. In addition, some gaps remain in the regulation of hazardous chemicals at fuel cycle facilities. The status of ongoing efforts to improve regulation of chemical safety at fuel cycle facilities is discussed. (authors)

76 FR 70342 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-11-14

...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... published in the Federal Register. This notice lists temporary safety zones, security zones, special local... Commanders and Captains of the Port (COTP) must be immediately responsive to the safety and security needs...

The safety and regulation of natural products used as foods and food ingredients.

Science.gov (United States)

Abdel-Rahman, Ali; Anyangwe, Njwen; Carlacci, Louis; Casper, Steve; Danam, Rebecca P; Enongene, Evaristus; Erives, Gladys; Fabricant, Daniel; Gudi, Ramadevi; Hilmas, Corey J; Hines, Fred; Howard, Paul; Levy, Dan; Lin, Ying; Moore, Robert J; Pfeiler, Erika; Thurmond, T Scott; Turujman, Saleh; Walker, Nigel J

2011-10-01

The use of botanicals and dietary supplements derived from natural substances as an adjunct to an improved quality of life or for their purported medical benefits has become increasingly common in the United States. This review addresses the safety assessment and regulation of food products containing these substances by the U.S. Food and Drug Administration (FDA). The issue of safety is particularly critical given how little information is available on the toxicity of some of these products. The first section uses case studies for stevia and green tea extracts as examples of how FDA evaluates the safety of botanical and herbal products submitted for consideration as Generally Recognized as Safe under the Federal Food, Drug, and Cosmetics Act. The 1994 Dietary Supplement Health Education Act (DSHEA) created a regulatory framework for dietary supplements. The article also discusses the regulation of this class of dietary supplements under DSHEA and addresses the FDA experience in analyzing the safety of natural ingredients described in pre-market safety submissions. Lastly, we discuss an ongoing interagency collaboration to conduct safety testing of nominated dietary supplements.

Sor/88-391, 21 July 1988, uranium mines (Ontario) occupational health and safety regulations, amendment

International Nuclear Information System (INIS)

1988-08-01

These Regulations (SOR/84-435) were made to establish uniformity in the laws governing occupational health and safety in mines in the Province of Ontario. To ensure conformity, the legal references in the Regulations have been amended to accord with the 1987 amendment of the Ontario Occupational Health and Safety Act [fr

Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-22

The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

Fitting into the Harsh Reality: Regulation of Irondeficiency Responses in Dicotyledonous Plants

Institute of Scientific and Technical Information of China (English)

Rumen Ivanov; Tzvetina Brumbarova; Petra Bauer

2012-01-01

Iron is an essential element for life on Earth and its shortage,or excess,in the living organism may lead to severe health disorders.Plants serve as the primary source of dietary iron and improving crop iron content is an important step towards a better public health.Our review focuses on the control of iron acquisition in dicotyledonous plants and monocots that apply a reduction-based strategy in order to mobilize and import iron from the rhizosphere.Achieving a balance between shortage and excess of iron requires a tight regulation of the activity of the iron uptake system.A number of studies,ranging from single gene characterization to systems biology analyses,have led to the rapid expansion of our knowledge on iron uptake in recent years.Here,we summarize the novel insights into the regulation of iron acquisition and internal mobilization from intracellular stores.We present a detailed view of the main known regulatory networks defined by the Arabidopsis regulators FIT and POPEYE (PYE).Additionally,we analyze the root and leaf ironresponsive regulatory networks,revealing novel potential gene interactions and reliable iron-deficiency marker genes.We discuss perspectives and open questions with regard to iron sensing and post-translational regulation.

The role of the regulator in promoting and evaluating safety culture. Operating experience feedback programme approach

International Nuclear Information System (INIS)

Perez, S.

2002-01-01

Promoting and Evaluating Safety Culture (S.C.) in Operating Organizations must be one of the main Nuclear Regulator goals to achieve. This can be possible only if each and every one of the regulatory activities inherently involves S.C. It can be seen throughout attitudes, values, uses and practices in both individuals and the whole regulatory organization. One among all the regulatory tools commonly used by regulators to promote and evaluate the commitment of the licensees with safety culture as a whole involves organizational factors and particular attention is directed to the operating organization. This entailed a wide range of activities, including all those related with management of safety performance. Operating Experience Feedback Programme as a tool to enhance safety operation is particularly useful for regulators in the evaluation of the role of S.C. in operating organization. Safety Culture is recognized as a subset of the wider Organizational Culture. Practices that improve organizational effectiveness can also contribute to enhance safety. An effective event investigation methodology is a specific practice, which contributes to a healthy Safety Culture. (author)

Comparing Person Organization Fit and Person Job Fit

Directory of Open Access Journals (Sweden)

Kadir Ardıç

2016-07-01

Full Text Available Although there have been many studies conducted to analyze the effects of person-organization fit (POF and person-job fit (PJF on individual outcomes, little is known about which of these fit associates stronger with individual variables (i.e., intention to quit job, IQJ, and perceived individual performance, PIP. Therefore the purpose of the study is to compare the relationships of PJF and POF with IQJ and PIP. The sample of the study consists of security guards working at a private company's civil aviation safety department. Totally 98 security guards participated to the research. Results indicated that, the relationships of PJF and POF with IQJ and PIP were not significantly different. Consequently the results indicate that POF and PJF associate similarly with critical individual outcomes.

Harmonization of nuclear and radiation safety regulations for nuclear power plants with reference levels of Western European Nuclear Regulators Association (WENRA)

International Nuclear Information System (INIS)

Bojchuk, V.S.; Mikolajchuk, O.A.; Gromov, G.V.; Dibach, O.M.; Godovanyuk, G.M.; Nosovs'kij, A.V.

2014-01-01

Self-evaluation of the Ukrainian regulations on nuclear and radiation safety that apply to nuclear power plants for compliance with the reference levels of the Western European Nuclear Regulators Association (WENRA) is presented. Proposals on improvement of the regulations upon self-evaluation are provided

INFLUENCE OF PLANNING, ORGANIZATIONAL CHARACTERISTICS AND REGULATION ON ROAD TRAFFIC SAFETY OF PEDESTRIANS

Directory of Open Access Journals (Sweden)

G. M. Kuharenok

2011-01-01

Full Text Available The paper presents results of research on planning, organizational characteristics and regulation modes at  the regulated pedestrian crossings, located out of crossroads in the street and road network of Minsk. Some regularities pertaining to the influence of the investigated characteristics on road traffic safety of pedestrians are revealed in the paper. Practical offers on increase of road traffic safety of pedestrians in the Republic of Belarus have been developed on the basis of the executed investigations and cited in the paper. 

Providing current radiation safety according to new version of 'Ukrytie' object regulation

International Nuclear Information System (INIS)

Borovoj, A.A.; Vysotskij, E.D.; Krinitsyn, A.P.; Bogatov, S.A.

1999-01-01

Main provisions are given of the 'Ukryttia' object's Regulation related to provision of radiation safety during the object's operation. The safety is provided due to the realization by the object's personnel of functions of global monitoring of current radiation conditions, as well as of the measures of operative or preventive suppression of radiation abnormalities sources

Transports of radioactive materials. Legal regulations, safety and security concepts, experience

International Nuclear Information System (INIS)

Schwarz, Guenther

2012-01-01

In Germany, approximately 650,000 to 750,000 units containing radioactive materials for scientific, medical and technical applications are shipped annually by surface, air and water transports. Legally speaking, radioactive materials are dangerous goods which can cause hazards to life, health, property and the environment as a result of faulty handling or accidents in transit. For protection against these hazards, their shipment therefore is regulated in extensive national and international rules of protection and safety. The article contains a topical review of the international and national transport regulations and codes pertaining to shipments of radioactive materials, and of the protection concepts underlying these codes so as to ensure an adequate standard of safety and security in shipping radioactive materials in national and international goods traffic. (orig.)

A macromarketing perspective on food safety regulation

DEFF Research Database (Denmark)

Bech-Larsen, Tino; Aschemann-Witzel, Jessica

2012-01-01

of the major stakeholders in the Danish food marketing system. Adding to the literature on diffusion of regulatory initiatives, the analysis shows that the Danish ban on trans-fats had—and still has—an important impact on trans-fat regulation in other European and overseas countries. In the final section......This article discusses the implementation and diffusion of mandatory and voluntary food safety regulations from a marketing systems perspective, and specifically applies this framework to an analysis of the antecedents and implications of the Danish 2003 ban on trans-fatty acids (TFAs......). The analysis is based on reviews of published material and on interviews with food marketers, nutrition experts, and policy makers. It is established that the ban was implemented due to scientific proof of health risks associated with the intake of TFAs but also as a result of aligned interests and efforts...

Use of the bootstrap method to develop a physical fitness test for public safety officers who serve as both police officers and firefighters.

Science.gov (United States)

Adams, Jenny; Cheng, Dunlei; Lee, John; Shock, Tiffany; Kennedy, Kathleen; Pate, Scotty

2014-07-01

Physical fitness testing is a common tool for motivating employees with strenuous occupations to reach and maintain a minimum level of fitness. Nevertheless, the use of such tests can be hampered by several factors, including required compliance with US antidiscrimination laws. The Highland Park (Texas) Department of Public Safety implemented testing in 1991, but no single test adequately evaluated its sworn employees, who are cross-trained and serve as police officers and firefighters. In 2010, the department's fitness experts worked with exercise physiologists from Baylor Heart and Vascular Hospital to develop and evaluate a single test that would be equitable regardless of race/ethnicity, disability, sex, or age >50 years. The new test comprised a series of exercises to assess overall fitness, followed by two sequences of job-specific tasks related to firefighting and police work, respectively. The study group of 50 public safety officers took the test; raw data (e.g., the number of repetitions performed or the time required to complete a task) were collected during three quarterly testing sessions. The statistical bootstrap method was then used to determine the levels of performance that would correlate with 0, 1, 2, or 3 points for each task. A sensitivity analysis was done to determine the overall minimum passing score of 17 points. The new physical fitness test and scoring system have been incorporated into the department's policies and procedures as part of the town's overall employee fitness program.

76 FR 9646 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-02-22

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 100, 117, 147, and 165 [USCG-2010-0399] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation Regulations and Regulated Navigation Areas AGENCY: Coast Guard, DHS. ACTION: Notice of expired temporary rules...

Use of risk information to safety regulation. Fabrication facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

A procedure of ISA (Integrated Safety Analysis) for uranium fuel fabrication/enrichment facilities has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. There are two major activities in the year. First one is a study on ISA procedure for external events such as earthquakes. Second one is that for chemical consequences such as UF6 and HF. Other than the activities a fundamental study on a policy of utilizing risk information was conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

Bases of updating of nuclear safety regulations for NPP in Romania

International Nuclear Information System (INIS)

Biro, Lucian; Serbanescu, Dan

1999-01-01

The paper presents the basic principles of reviewing and updating process of the regulatory environment pyramid. The main part of this review process refers to Cernavoda NPP Unit 2. However, there is an important impact on Cernavoda NPP Unit 1. The basic principles were defined in 1993/1994 when the licensing process for Unit 1 was resumed in order to be in accordance with the latest developments of Candu 600 worldwide and with the IAEA and NEA latest recommended documents and practices. After the licensing process for the Unit 1 was completed up to operation stage, CNCAN developed new updated regulations on nuclear safety and the regulatory pyramid in the framework of the RAMG PHARE project. CNCAN issued in 1996 the regulatory Policy for Unit 2, self-sustained and independent of future possible revisions of the regulations. The use of the concept of hierarchical systems, systematic review of safety criteria and objectives and margins along with the feedback from international and national experience on this topic ensured issuance of a reference document for future approach of nuclear safety in Romania. (authors)

Cost-benefit comparison of nuclear and nonnuclear health and safety protective measures and regulations

International Nuclear Information System (INIS)

O'Donnell, E.P.; Mauro, J.J.

1979-01-01

This article compares the costs and benefits of health and safety measures and regulations in the nuclear and nonnuclear fields. A cost-benefit methodology for nuclear safety concerns is presented and applied to existing nuclear plant engineered safety features. Comparisons in terms of investment costs to achieve reductions in mortality rates are then made between nuclear plant safety features and the protective measures and regulations associated with nonnuclear risks, particularly with coal-fired power plants. These comparisons reveal a marked inconsistency in the cost effectiveness of health and safety policy, in which nuclear regulatory policy requires much greater investments to reduce the risk of public mortality than is required in nonnuclear areas where reductions in mortality rates could be achieved at much lower cost. A specific example of regulatory disparity regarding gaseous effluent limits for nuclear and fossil-fuel power plants is presented. It is concluded that a consistent health and safety regulatory policy based on uniform risk and cost-benefit criteria should be adopted and that future proposed Nuclear Regulatory Commission regulatory requirements should be critically evaluated from a cost-benefit viewpoint

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1984-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows: limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Mori, K.)

Regulation for delivery of subsidies for public relations and safety

International Nuclear Information System (INIS)

1985-01-01

The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows : limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Kubozono, M.)

AVIATION SAFETY CULTURE MEASUREMENT MODEL FIT VALIDATION OF A SURVEY FOR THE AVIATION MAINTENANCE REPAIR ORGANIZATIONS

OpenAIRE

Vahap ÖNEN

2017-01-01

It is believed that safety is the major issue for the aviation industry. According to Boeing Study %15 of the fatal accidents are incurred by maintenance sources related. On the other hand, from the last ten years safety management system which firstly introduced by ICAO became popular in the aviation industry. In the beginning, enforcement by ICAO Annex 19 then following it consequtively by EASA’s regulation, at the same time issued many advisory circulars by FAA that SMS entried in force an...

Guidelines on Building Regulations 2008

DEFF Research Database (Denmark)

Thse guidelines clarify and intepret the provisions of the Building Regulations of 2008 (BR08). The Guidelines, which match BR08 in terms of organisation into Parts, are accompanied by the full text of the regulations and the explanatory notes issued by the Danish Enterprise and Construction...... Authority. The Guidelines refer the reader to sources such as relevant standards, instructions and other background material which provides more detailed information. The Guidelines cover the same ground as BR08, including building control regulations, layout, fitting out, structures, fire safety, indoor...... climate, energy consumotion and services. The Guidelines are aimed at all professionals involved in building projects, particularly building design consultants, contractors and municipal application officers....

Pesticide regulations and farm worker safety: the need to improve pesticide regulations in Viet Nam.

Science.gov (United States)

Phung, Dung Tri; Connell, Des; Miller, Greg; Rutherford, Shannon; Chu, Cordia

2012-06-01

Agricultural pesticide use in Viet Nam has more than tripled since 1990. However, pesticide legislation and regulations have not been developed in response to this large increase in usage, as a result of which pesticides pose a serious threat to human health and the environment. This paper identifies the need to improve pesticide regulations in Viet Nam through a comparative analysis of pesticide regulations in Viet Nam and the United States of America, where the rate of acute poisoning among agricultural workers is much lower than in Viet Nam and where information pertaining to pesticide regulations is made accessible to the public. The analysis identified several measures that would help to improve Viet Nam's pesticide regulations. These include enhancing pesticide legislation, clarifying the specific roles and active involvement of both the environmental and health sectors; performing a comprehensive risk-benefit evaluation of pesticide registration and management practices; improving regulations on pesticide suspension and cancellation, transport, storage and disposal; developing import and export policies and enhancing pesticide-related occupational safety programmes.

The challenges for global harmonisation of food safety norms and regulations: issues for India.

Science.gov (United States)

Prakash, Jamuna

2014-08-01

Safe and adequate food is a human right, safety being a prime quality attribute without which food is unfit for consumption. Food safety regulations are framed to exercise control over all types of food produced, processed and sold so that the customer is assured that the food consumed will not cause any harm. From the Indian perspective, global harmonisation of food regulations is needed to improve food and nutrition security, the food trade and delivery of safe ready-to-eat (RTE) foods at all places and at all times. The Millennium Development Goals (MDGs) put forward to transform developing societies incorporate many food safety issues. The success of the MDGs, including that of poverty reduction, will in part depend on an effective reduction of food-borne diseases, particularly among the vulnerable group, which includes women and children. Food- and water-borne illnesses can be a serious health hazard, being responsible for high incidences of morbidity and mortality across all age groups of people. Global harmonisation of food regulations would assist in facilitating food trade within and outside India through better compliance, ensuring the safety of RTE catered foods, as well as addressing issues related to the environment. At the same time, regulations need to be optimum, as overregulation may have undue negative effects on the food trade. © 2013 Society of Chemical Industry.

State of bus safety in the U.S. : summary of federal and state regulations.

Science.gov (United States)

2014-06-01

This report provides a comprehensive overview of transit bus safety regulations and standards developed by all 50 states, as well as : information on how state departments of transportation (DOT) regulate the maintenance or operation of transit/parat...

Risk assessment and safety regulations in offshore oil and gas ...

African Journals Online (AJOL)

Risk management of which risk assessment is part, and safety regulations are common in the offshore oil and gas industry management system. The process of conducting risk assessment is mostly a challenge for operational personnel assigned to perform this function. The most significant problem is the decision to use ...

Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-11-15

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

International Nuclear Information System (INIS)

2011-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Nuclear safety philosophy and its general application to fuel management and handling - a regulator's viewpoint

International Nuclear Information System (INIS)

Petty, I.C.

1995-01-01

The Nuclear Safety Division (NSD) of the Health and Safety Executive (HSE) informs the UK Nuclear Industry of the principles that it applies in assessing whether licensees have demonstrated that their nuclear plants are as safe as is reasonably practicable. The paper commences with a discussion of the non-prescriptive approach to health and safety regulation which is the basis of the regulatory activities of NSD's operating arm -the Nuclear Installations Inspectorate (NII). It then describes in broad terms the overall approach used by NII for analysing the safety of nuclear plant, including fuel, which will cover both deterministic and probabilistic methodologies. The paper then introduces the sections of the Safety Assessment Principles which apply to nuclear fuel safety (both fuel handling and management). Most of these principles are of a general nature and do not just apply to fuel. The paper explains how safety cases might relate to the SAPs and offers some views on how a licensee might interpret them in developing his safety case. Particular emphasis is placed on the importance of submitting a high quality safety case and the type of information that should be in it. The advantages of the approach proposed, to the licensee as well as to the regulator, are identified. (author)

Regulations of 19 August 1978 on the optional principles of the Nuclear Safety Committee

International Nuclear Information System (INIS)

1978-01-01

These regulations were published in the Turkish Official Gazette of 19 August 1978 and were made pursuant to Decree no. 7/9141 of 1975 on licensing of nuclear installations which established the Nuclear Safety Committee. They determine the duties and responsibilities of the Committee, its qualifications, its operating principles and its relations with the Nuclear Safety Assistance Service set up in the Turkish Atomic Energy Commission for the purposes of assisting its Secretary General. The regulations also lay down the procedures to be applied for consultations on granting licences. (NEA) [fr

Converting the GSR part3 into a national regulations for the protection and safety of radiation sources

International Nuclear Information System (INIS)

Hatim, Abdulrahman

2016-04-01

The achievement and maintenance of a high level of Radiation Protection and Safety of Radiation Sources depends on a sound legal and governmental infrastructure, including a regulatory body with well-defined responsibilities and functions. The project aimed at converting the IAEA GRS Part 3 into National regulations in Sudan for the protection against the harmful effects of ionizing radiation and safety of radiation sources. The regulations developed covered general requirements for radiation protection, verification of safety, planned exposure situations, emergency exposure situations and existing exposure situation. The Government of Sudan is expected to empower the Sudanese Nuclear Radiological Regulatory Authority (SNRAA) and other relevant authorities to undertake the conversion of IAEA GSR Part 3 into national regulations to be used to regulate all facilities and activities in Sudan. (au)

Application of a support vector machine algorithm to the safety precaution technique of medium-low pressure gas regulators

Science.gov (United States)

Hao, Xuejun; An, Xaioran; Wu, Bo; He, Shaoping

2018-02-01

In the gas pipeline system, safe operation of a gas regulator determines the stability of the fuel gas supply, and the medium-low pressure gas regulator of the safety precaution system is not perfect at the present stage in the Beijing Gas Group; therefore, safety precaution technique optimization has important social and economic significance. In this paper, according to the running status of the medium-low pressure gas regulator in the SCADA system, a new method for gas regulator safety precaution based on the support vector machine (SVM) is presented. This method takes the gas regulator outlet pressure data as input variables of the SVM model, the fault categories and degree as output variables, which will effectively enhance the precaution accuracy as well as save significant manpower and material resources.

Critical Reflections on Conservatism in Nuclear Safety Regulation

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Kwang Sik

2007-01-01

A recent report published by the Committee on Nuclear Regulatory Activities (CNRA) of the OECD Nuclear Energy Agency (NEA) says that a fundamental principle for safety regulators is the practice of conservative decision making. Nuclear regulators frequently face challenging issues surrounded by uncertainties or lack of data and information. No matter what efforts will be made to collect the available information and to assess the issues, nobody can clear all the uncertainties and make absolutely certain decision. More often than not, the regulators have to make a decision in light of continuing uncertainties and limited information. It is at this point that the principle of conservatism should play a role. However the principle comes in many diverse forms such as default conservatism, precautionary principle, defense in depth and realistic conservatism. These different forms of conservatism have different roles and meanings that will take a decision maker to drastically different results. This paper reviews different forms of conservatism in critical way, presents analytical framework for decision making under uncertainty and suggests future research works needed

Safety experts complete second IAEA regulatory review of UK nuclear regulator

International Nuclear Information System (INIS)

2009-01-01

Full text: Nuclear safety experts today concluded a 10-day mission to peer-review the UK Nuclear Regulator: Health and Safety Executive (HSE), Nuclear Directorate (ND). At the request of the UK Government, the International Atomic Energy Agency assembled a team of ten high-level regulatory experts from eight nations to conduct the Integrated Regulatory Review Service (IRRS) mission. The mission was the second of three planned IRRS missions for the United Kingdom. The first was held in March 2006 to begin a process to assess the nation's readiness to regulate and license new reactor designs, considered as a result of the Energy Policy review initiated by the British Prime Minister and the Secretary of State for Trade and Industry (DTI) in 2005. The IRRS team leader Mr. William Borchardt, Executive Director of Operations from the US Nuclear Regulatory Commission, stated, ''The IAEA IRRS serves an important role in both benchmarking against its safety standards and in promoting dialogue between nuclear safety regulators from around the world.'' During the 2nd mission the IRRS the team reviewed HSE/ND progress since the first IRRS mission and recent regulatory developments, the regulation of operating power plants and fuel cycle facilities, the inspection and enforcement programme for nuclear power plants and fuel cycle facilities, and the emergency preparedness and response programme. The IAEA found that HSE/ND has made significant progress toward improving its effectiveness in regulating existing nuclear power plants and in preparing to license new nuclear reactors designs. Many of the findings identified in the 2006 report had been fully addressed and therefore could be considered closed, the others are being addressed in accordance with a comprehensive action plan. IRRS team members visited the Heysham 1 Nuclear Power Plant near Lancaster, the Sellafield site at Cumbria and the Strategic Control Centre at Hutton, and they met senior managers from HSE and a UK

Development of a safety and regulation systems simulation program II

International Nuclear Information System (INIS)

1985-05-01

This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

Disclosure and Fit Capability of the Filtering Facepiece Respirator.

Science.gov (United States)

Lofgren, Don J

2018-05-01

The filtering facepiece air-purifying respirator is annually purchased in the tens of millions and widely used for worker protection from harmful airborne particulates. The workplace consumers of this safety product, i.e., employers, workers, and safety and health professionals, have assurances of its effectiveness through the respirator certification and disclosure requirements of the National Institute for Occupational Safety and Health. However, the certification of a critical performance requirement has been missing for the approved filtering facepiece respirator since 1995: fit capability. Without this certification, consumers continue to be at risk of purchasing a respirator model that may fit a small percentage of the intended users. This commentary updates and expands an earlier one by this author, addresses the consequences of poorly fitting certified models on the market and lack of disclosure, and calls for further action by National Institute for Occupational Safety and Health to meet the needs and expectations of the consumer.

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition); Reglement de transport des matieres radioactives. Edition de 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

Use of Active-Play Video Games to Enhance Aerobic Fitness in Schizophrenia: Feasibility, Safety, and Adherence.

Science.gov (United States)

Kimhy, David; Khan, Samira; Ayanrouh, Lindsey; Chang, Rachel W; Hansen, Marie C; Lister, Amanda; Ballon, Jacob S; Vakhrusheva, Julia; Armstrong, Hilary F; Bartels, Matthew N; Sloan, Richard P

2016-02-01

Active-play video games have been used to enhance aerobic fitness in various clinical populations, but their use among individuals with schizophrenia has been limited. Feasibility, acceptability, safety, and adherence data were obtained for use of aerobic exercise (AE) equipment by 16 individuals with schizophrenia during a 12-week AE program consisting of three one-hour exercise sessions per week. Equipment included exercise video games for Xbox 360 with Kinect motion sensing devices and traditional exercise equipment. Most participants (81%) completed the training, attending an average of 79% of sessions. The proportion of time spent playing Xbox (39%) exceeded time spent on any other type of equipment. When using Xbox, participants played 2.24±1.59 games per session and reported high acceptability and enjoyment ratings, with no adverse events. Measures of feasibility, acceptability, adherence, and safety support the integration of active-play video games into AE training for people with schizophrenia.

Safety and regulation in the use of radiation in medicine: status in India and future perspective

International Nuclear Information System (INIS)

Gopalakrishnan, A.; Parthasarathy, K.S.; Ghosh, P.K.

1996-01-01

This paper briefly reviews the history of radiation protection, regulatory aspects and the status of radiation safety in radiotherapy, radiodiagnosis and nuclear medicine in India. The revised basic safety standards and the future developments envisaged in the safety and regulation are also mentioned. (author). 24 refs., 8 tabs

Recent development in safety regulation of nuclear fuel cycle activities

International Nuclear Information System (INIS)

Kato, S.

2001-01-01

Through the effort of deliberation and legislation over five years, Japanese government structure was reformed this January, with the aim of realizing simple, efficient and transparent administration. Under the reform, the Agency for Nuclear and Industrial Safety (ANIS) was founded in the Ministry of Economy, Trade and Industry (METI) to be responsible for safety regulation of energy-related nuclear activities, including nuclear fuel cycle activities, and industrial activities, including explosives, high-pressure gasses and mining. As one of the lessons learned from the JCO criticality accident of September 1999, it was pointed out that the government's inspection function was not enough for fuel fabrication facilities. Accordingly, new statutory regulatory activities were introduced, namely, inspection of observance of safety rules and procedures for all kinds of nuclear operators and periodic inspection of fuel fabrication facilities. In addition, in order to cope with insufficient safety education and training of workers in nuclear facilities, licensees of nuclear facilities are required by law to specify safety education and training for their workers. ANIS is committed to enforce these new regulatory activities effectively and efficiently. In addition, it is going to be prepared, in its capacity as safety regulatory authority, for future development of Japanese fuel cycle activities, including commissioning of JNFL Rokkasho reprocessing plant and possible application for licenses for JNFL MOX fabrication plant and for spent fuel interim storage facilities. (author)

The role of the nuclear safety regulator

International Nuclear Information System (INIS)

Mellado, I.

2007-01-01

The Consejo de Seguridad Nuclear (CSN), or Nuclear Safety Council, is the only Spanish institution qualified in nuclear safety and radiological protection. Created in 1980, the CSN is independent of the Central State Administration, and possesses its own legal standing, estate and resources acquired directly from tax revenues. The CSN proposes regulations and advises the government on subjects within its competence, including the criteria for siting nuclear facilities once the autonomous regions have been informed. The CSN is responsible for issuing mandatory and binding reports to the Ministry of Industry. Tourism and Commerce, and for inspections and evaluation of the facilities included within its realm of competence throughout their phases (construction, start-up, operating and decommissioning). It is also responsible for the radiological control and surveillance of workers, the general public and the environment, as described below. In 1999, a new responsibility was assigned to the CSN to perform studies, assessment and inspections in relation to all phases of radioactive waste and spent fuel management. The CSN reports to the Spanish Parliament and is not subject to the hierarchy or auspices of the Government or the organisations in charge of promoting nuclear energy. The Council itself is an Associative Body comprised of 5 members, appointed by Parliament for a 6 year term (these members cannot be removed). Under this Council is situated an extensive technical body. A General Secretary is seconded by Technical Directors in the area of Nuclear Safety and Radiological Protection. As well there are a R and D Office, an Inspection Office, and a Technical Standards Office. The CSN counts 446 workers, of which 191 are university graduate specialists in nuclear safety or radiological protection. The average age is 45 years. Ongoing training is provided in technical specialties and management. (author)

Seismic and tsunami safety margin assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

Nuclear Regulation Authority is going to establish new seismic and tsunami safety guidelines to increase the safety of NPPs. The main purpose of this research is testing structures/components important to safety and tsunami resistant structures/components, and evaluating the capacity of them against earthquake and tsunami. Those capacity data will be utilized for the seismic and tsunami back-fit review based on the new seismic and tsunami safety guidelines. The summary of the program in 2012 is as follows. 1. Component seismic capacity test and quantitative seismic capacity evaluation. PWR emergency diesel generator partial-model seismic capacity tests have been conducted and quantitative seismic capacities have been evaluated. 2. Seismic capacity evaluation of switching-station electric equipment. Existing seismic test data investigation, specification survey and seismic response analyses have been conducted. 3. Tsunami capacity evaluation of anti-inundation measure facilities. Tsunami pressure test have been conducted utilizing a small breakwater model and evaluated basic characteristics of tsunami pressure against seawall structure. (author)

Seismic and tsunami safety margin assessment

International Nuclear Information System (INIS)

2013-01-01

Nuclear Regulation Authority is going to establish new seismic and tsunami safety guidelines to increase the safety of NPPs. The main purpose of this research is testing structures/components important to safety and tsunami resistant structures/components, and evaluating the capacity of them against earthquake and tsunami. Those capacity data will be utilized for the seismic and tsunami back-fit review based on the new seismic and tsunami safety guidelines. The summary of the program in 2012 is as follows. 1. Component seismic capacity test and quantitative seismic capacity evaluation. PWR emergency diesel generator partial-model seismic capacity tests have been conducted and quantitative seismic capacities have been evaluated. 2. Seismic capacity evaluation of switching-station electric equipment. Existing seismic test data investigation, specification survey and seismic response analyses have been conducted. 3. Tsunami capacity evaluation of anti-inundation measure facilities. Tsunami pressure test have been conducted utilizing a small breakwater model and evaluated basic characteristics of tsunami pressure against seawall structure. (author)

The UK health and safety executive's policies on information relating to nuclear safety regulation

International Nuclear Information System (INIS)

Williams, L.

1994-01-01

How a message is transmitted can be as important as what is said. To be effective a message has to be timely, targeted and clear. People do not always remember what was said, by how and when it was said. This paper discusses some of the tools which the Nuclear Safety Division (NSD), the UK's nuclear regulator, has used and emphasizes the need to recognize the importance of a recipient interest in attempting to transmit a message. (author). 4 refs

NRC safety research in support of regulation. Selected highlights

International Nuclear Information System (INIS)

1986-05-01

The report presents selected highlights of how research has contributed to the regulatory effort. It explains the research role of the NRC and nuclear safety research contributions in the areas of: pressure vessel integrity, piping, small- and large-break loss-of-coolant accidents, hydrogen and containment, source term analysis, seismic hazards and high-level waste management. The report also provides a summary of current and future research directions in support of regulation

48 CFR 1252.217-80 - Department of Labor Safety and Health Regulations for Ship Repairing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Department of Labor Safety and Health Regulations for Ship Repairing. 1252.217-80 Section 1252.217-80 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1252.217-80...

Learning and nuclear safety: New reactors and US regulation

International Nuclear Information System (INIS)

Nichols, E.; Wildavsky, A.

1992-01-01

Gathering and analyzing data from operating reactors has become part of government and industry programs to improve performance in plants already on line and to inform development of future reactors. In the United States, however, early development and certain other factors combined to encourage a bias in learning. Regulation and learning from operational data intersect in ways that limit participation, data collection, and positive response to findings. Past learning has shown the advantage of simpler more standard designs with passive or inherent safety features. However, even designs incorporating these past lessons are apt to face tough regulatory tests and much criticism as operating experience is gathered. Only the operational success of new standardized reactors is apt to help rationalize regulation. (orig.)

Food safety regulations: what we learned from the Fukushima nuclear accident

International Nuclear Information System (INIS)

Hamada, Nobuyuki; Ogino, Haruyuki

2012-01-01

On 11 March 2011, the magnitude-9.0 earthquake and a substantial tsunami struck off the northeast coast of Japan. The Fukushima nuclear power plants were inundated and stricken, followed by radionuclide releases outside the crippled reactors. Provisional regulation values for radioactivity in food and drink were set on 17 March and were adopted from the preset index values, except that for radioiodines in water and milk ingested by infants. For radiocesiums, uranium, plutonium and transuranic α emitters, index values were defined in all food and drink not to exceed a committed effective dose of 5 mSv/year. Index values for radioiodines were defined not to exceed a committed equivalent dose to the thyroid of 50 mSv/year, and set in water, milk and some vegetables, but not in other foodstuffs. Index values were calculated as radioactive concentrations of indicator radionuclides ( 131 I for radioiodines, 134 Cs and 137 Cs for radiocesiums) by postulating the relative radioactive concentration of coexisting radionuclides (e.g., 132 I, 133 I, 134 I, 135 I and 132 Te for 131 I). Surveys were thence conducted to monitor levels of 131 I, 134 Cs and 137 Cs. Provisional regulation values were exceeded in tap water, raw milk and some vegetables, and restrictions on distribution and consumption began on 21 March. Fish contaminated with radioiodines at levels of concern were then detected, so that the provisional regulation value for radioiodines in seafood adopted from that in vegetables were additionally set on 5 April. Overall, restrictions started within 25 days after the first excess in each food or drink item, and maximum levels were detected in leafy vegetables (54,100 Bq/kg for 131 I, and a total of 82,000 Bq/kg for 134 Cs and 137 Cs). This paper focuses on the logic behind such food safety regulations, and discusses its underlying issues. The outlines of the food monitoring results for 24,685 samples and the enforced restrictions will also be described. - Highlights

Project CHERISH (Children in Home Environments: Regulation To Improve Safety and Health). Final Report.

Science.gov (United States)

Grubb, Paul Dallas

In 1990, Project CHERISH (Children in Home Environments: Regulation to Increase Safety and Health) enabled the Texas Department of Human Services to implement and evaluate several innovative strategies to strengthen regulation of family day care homes. This report contains descriptions of those strategies, an evaluation of their efficacy, and…

76 FR 7107 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

Science.gov (United States)

2011-02-09

... defined boundary for which regulations for vessels navigating within the area have been established by the...)...... 9/19/2008 USCG-2008-0814 San Diego, CA Safety Zones (Part 165)...... 9/6/2008 USCG-2008-0827 Ocean... (Part 165). USCG-2009-0402 Ocean City, NJ Safety Zones (Part 165)...... 10/10/2009 USCG-2009-0403...

75 FR 4305 - Regulatory Guidance Concerning the Applicability of the Federal Motor Carrier Safety Regulations...

Science.gov (United States)

2010-01-27

... review of, or preparation and transmission of, typed messages via wireless phones. Because of the safety... Secretary broad power in carrying out motor carrier safety statutes and regulations to ``prescribe.... Handheld or other wireless electronic devices that are brought into a CMV are considered ``additional...

Moving beyond command-and-control: reflexivity in the regulation of occupational safety and health and the environment.

NARCIS (Netherlands)

Aalders, M.V.C.; Wilthagen, T.

1997-01-01

Direct or "command-and-control" regulation has had limited success in dealing with occupational health and safety and with environmental regulation. This lack of success has led policymakers to experiment with self-regulation as an alternative means of achieving the goals of social regulation. The

Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2009 Ed.). Safety Guide

International Nuclear Information System (INIS)

2014-01-01

This Safety Guide is issued in support of Regulations for the Safe Transport of Radioactive Material (IAEA Safety Standards Series No. TS-R-1, 2009 Edition). It lists the paragraph numbers of the Transport Regulations that are relevant for specified types of consignment, classified according to their UN numbers. It does not provide additional recommendations. The intended users are consignors and consignees, carriers, shippers, regulators, and end users involved in the transport of radioactive material. A person or organization intending to transport a particular type of consignment of radioactive material must meet requirements in all sections of the Transport Regulations. This Safety Guide aids users by providing a listing of the relevant requirements of the Transport Regulations for each type of radioactive material, package or shipment. Once a consignor has classified the radioactive material to be shipped, the appropriate UN number can be assigned and the paragraph numbers of the requirements that apply for the shipment can be found in the corresponding schedule

Fit, Healthy, and Ready To Learn: A School Health Policy Guide. Part II: Policies To Promote Sun Safety and Prevent Skin Cancer.

Science.gov (United States)

Fraser, Katherine

This publication is a supplementary chapter to "Fit, Healthy, and Ready to Learn: A School Health Policy Guide; Part I: General School Health Policies, Physical Activity, Healthy Eating, and Tobacco-Use Prevention." It discusses various aspects of a complete school policy and plan to promote sun safety. The first section "Purpose…

Trends in pharmacy staff's perception of patient safety in Swedish community pharmacies after re-regulation of conditions.

Science.gov (United States)

Kälvemark Sporrong, Sofia; Nordén-Hägg, Annika

2014-10-01

All changes in the regulation of pharmacies have an impact on the work carried out in pharmacies and also on patient safety, regardless of whether this is the intention or not. To compare staff apprehension regarding some aspects of patient safety and quality in community pharmacies prior to and after the 2009 changes in regulation of the Swedish community pharmacy market. Questionnaires targeted at pharmacy staff before and after the changes in regulation (in 2008, 2011/12, and 2012/13 respectively) used four identical items, making comparisons of some aspects possible. All four items demonstrated a significant decrease in the first survey after the changes as compared to before. In the second survey significant differences were found on the two items representing safety climate whereas the items representing team climate and management showed no significant differences. The comparison carried out in this study indicates a negative effect in Swedish community pharmacies on safety and quality issues, as experienced by pharmacy staff. It is recommended that the possible effects of healthcare reforms are assessed before implementation, in order to counteract conceivable decline in factors including patient safety and working conditions.

Stakeholder confidence in effective safety regulation. A regulator's view on the role of independent research capability

International Nuclear Information System (INIS)

Kotra, Janet; Mohanty, Sitakanto

2006-01-01

The authors provided a regulator's view on the role of independent research capability and its relationship to stakeholder confidence. They underscored the NRC's commitment to regulatory openness in its Strategic Plan. A number of actions have been adopted to achieve openness: public access to information about risks, safety and licensee performance that is accurate and timely; enhanced awareness of NRC as an independent regulator; fair and timely process for public involvement in NRC's decision-making; and early public involvement and two-way communication to enhance public confidence in NRC's regulatory process. The presentation reviewed the ways through which the NRC seeks to inspire confidence in its process as independent regulator and in future decisions concerning whether to authorize the U.S. DOE to construct the proposed repository at Yucca Mountain. Key to this will be reviewing all information objectively, making open decisions based on sound, scientific judgements about the facts; and maintaining an open and fair public process, and accessing independent R and D. It was noted that among the requirements for the safety review for the Yucca Mountain repository will be extensive technical and scientific analyses, evaluation of expert judgement, and long-range modelling assessments of expected repository performance. NRC requires independent scientific and engineering analyses to develop technical bases for regulations and guidance; evaluate adequacy of DOE's safety case for a potential repository; assist preparation of NRC Safety Evaluation Report; provide technical support for NRC testimony during licensing hearing; and develop effective outreach and communication tools. Confidence in NRC's use of science and engineering will depend upon: competence; independence; open and fair process; regulatory outcomes that are subject to verification and monitoring. To assist, the NRC established the Centre for Nuclear Waste Regulatory

Development of safety evaluation methods and analysis codes applied to the safety regulations for the design and construction stage of fast breeder reactor

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to develop the safety evaluation methods and analysis codes needed in the design and construction stage of fast breeder reactor (FBR). In JFY 2012, the following results are obtained. As for the development of safety evaluation methods needed in the safety examination conducted for the reactor establishment permission, development of the analysis codes, such as core damage analysis code, were carried out following the planned schedule. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

Improved nuclear power plant operations through performance-based safety regulation

International Nuclear Information System (INIS)

Golay, M.W.

1998-01-01

The US Nuclear Regulatory Commission (NRC) has recently instituted use of Risk-Informed, Performance-Based Regulation (RIPBR) for protecting public safety in the use of nuclear power. This was done most importantly during June 1997 in issuance of revised Regulatory Guides and Standard Review Plan (SRP) guidance to licensees and the NRC staff. The propose of RIPBR is to replace the previously-used system of prescriptive regulation, which focuses upon what licensees must do, to a system which focuses upon what they must achieve. RIPBR is goals-oriented and the previous system is means-oriented. This regulatory change is potentially revolutionary, and offers many opportunities for improving the efficiency of improving both nuclear power operations and safety. However, it must be nurtured carefully if is to be successful. The work reported in this paper is concerned with showing how RIPBR can be implemented successfully, with benefits in both areas being attained. It is also concerned with how several of the practical barriers to establishing a workable new regulatory system can be overcome. This work, sponsored by the US Dept. of Energy, is being performed in collaboration with Northeast Utilities Services Crop. and the Idaho National Engineering Laboratory. In our work we have examined a practical safety-related example at the Millstone 3 nuclear power station for implementation of RIPBR. In this examination we have formulated a set of modifications to the plant's technical specifications, and are in the process of investigating their bases and refining the modifications. (author)

Design and qualification of nuclear fittings

International Nuclear Information System (INIS)

Coppolani, P.

1985-01-01

This paper gives a definition of nuclear fittings and presents its characteristics, its operating conditions and the safety function that they ensure. The classification of fittings and the consequences on its design are presented. The procedures of design verification and the validation in loop are given. Two equipments are finally presented: the Framatome Velan Rateau valve and the VR3-1500 LB valve [fr

33 CFR 183.554 - Fittings, joints, and connections.

Science.gov (United States)

2010-07-01

... (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.554 Fittings, joints, and connections. Each fuel system fitting, joint, and connection must be arranged so that it can be reached for inspection, removal, or maintenance without removal of permanent boat structure. ...

Safety Margins and Their Economical Value in a De-regulated Market

International Nuclear Information System (INIS)

Vidard, Michel

2002-01-01

The definition of safety margins is sometimes ambiguous. Depending on assumptions used to evaluate the evolution of plant parameters and on acceptance criteria, the same design could well turn out to have positive, zero, or negative margin for the same operating situation. Very often, considering that an optimized reactor would have to operate with zero margin compared to at least one safety criterion, designers or utilities considered in their analyses penalizing assumptions. This was done for example either considering reduced component capability or very high core peaking factors, the latter generally exceeding by far what would be anticipated in perturbed situations. This approach has three major drawbacks: -having a reasonable understanding of the real importance of safety margins is difficult, -if a non-conservatism is identified in a methodology, there is a high risk of being in a no-compliance situation from a regulatory standpoint, -it leads to a limitation on allowable electrical output and constraints on technical specifications for example. In a regulated market, such a situation can be tolerable as the final customer has to pay the extra financial burden in any case. In a de-regulated market, the situation is significantly different. The final customer can choose his supplier, and is likely to go to those offering the best prices, i.e. those making optimal use of their available resources. There is so a need for better understanding of real plant capabilities. Revisiting assumptions used for evaluating safety margins is so highly recommended, if not imperative, to electricity companies. This will helpful to reshape company strategies in case of evolution of market conditions. (author)

A double-regulated oncolytic adenovirus with improved safety for adenocarcinoma therapy

International Nuclear Information System (INIS)

Wei, Na; Fan, Jun Kai; Gu, Jin Fa; He, Ling Feng; Tang, Wen Hao; Cao, Xin; Liu, Xin Yuan

2009-01-01

Safety and efficiency are equally important to be considered in developing oncolytic adenovirus. Previously, we have reported that ZD55, an oncolytic adenovirus with the deletion of E1B-55K gene, exhibited potent antitumor activity. In this study, to improve the safety of ZD55, we utilized MUC1 promoter to replace the native promoter of E1A on the basis of ZD55, and generated a double-regulated adenovirus, named MUD55. Our data demonstrated that the expression of early and late genes of MUD55 was both reduced in MUC1-negative cells, resulting in its stricter glandular-tumor selective progeny production. The cytopathic effect of MUD55 was about 10-fold lower than mono-regulated adenovirus ZD55 or Ad.MUC1 in normal cells and not obviously attenuated in glandular tumor cells. Moreover, MUD55 showed the least liver toxicity when administrated by intravenous injection in nude mice. These results indicate that MUD55 could be a promising candidate for the treatment of adenocarcinoma.

Nintendo Wii Fit as an adjunct to physiotherapy following lower limb fractures: preliminary feasibility, safety and sample size considerations.

Science.gov (United States)

McPhail, S M; O'Hara, M; Gane, E; Tonks, P; Bullock-Saxton, J; Kuys, S S

2016-06-01

The Nintendo Wii Fit integrates virtual gaming with body movement, and may be suitable as an adjunct to conventional physiotherapy following lower limb fractures. This study examined the feasibility and safety of using the Wii Fit as an adjunct to outpatient physiotherapy following lower limb fractures, and reports sample size considerations for an appropriately powered randomised trial. Ambulatory patients receiving physiotherapy following a lower limb fracture participated in this study (n=18). All participants received usual care (individual physiotherapy). The first nine participants also used the Wii Fit under the supervision of their treating clinician as an adjunct to usual care. Adverse events, fracture malunion or exacerbation of symptoms were recorded. Pain, balance and patient-reported function were assessed at baseline and discharge from physiotherapy. No adverse events were attributed to either the usual care physiotherapy or Wii Fit intervention for any patient. Overall, 15 (83%) participants completed both assessments and interventions as scheduled. For 80% power in a clinical trial, the number of complete datasets required in each group to detect a small, medium or large effect of the Wii Fit at a post-intervention assessment was calculated at 175, 63 and 25, respectively. The Nintendo Wii Fit was safe and feasible as an adjunct to ambulatory physiotherapy in this sample. When considering a likely small effect size and the 17% dropout rate observed in this study, 211 participants would be required in each clinical trial group. A larger effect size or multiple repeated measures design would require fewer participants. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

The costs of uncertainty: regulating health and safety in the Canadian uranium industry

International Nuclear Information System (INIS)

Robinson, I.

1982-04-01

Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements. (Russian Edition); Pravila bezopasnoj perevozki radioaktivnykh materialov. Izdanie 2012 goda. Konkretnye trebovaniya bezopasnosti

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Ethical issues in engineering design processes ; regulative frameworks for safety and sustainability

NARCIS (Netherlands)

Gorp, A. van

2007-01-01

The ways designers deal with ethical issues that arise in their consideration of safety and sustainability in engineering design processes are described. In the case studies, upon which this article is based, a difference can be seen between normal and radical design. Designers refer to regulative

Reference values on safety regulation of land disposal of low level radioactive solid waste (the second interim report) and its incorporation into legal regulations

International Nuclear Information System (INIS)

Aoki, Terumi

1994-01-01

Safety regulation of land disposal of low level radioactive solid waste in Japan is based on 'the basic philosophy on the safety regulation of land disposal of low level radioactive solid waste' determined by the Nuclear safety Committee (October 1985). The basic philosophy on the upper limit of radioactivity of disposed wastes was published as the reference values in the interim report (February 1987) and in the second interim report (June 1992). In the second interim report, the upper limits of radioactivity are established for three types of solid radioactive wastes: 1) metals, incombustible or flame resistant wastes generated nuclear reactor facilities and solidified in vessels, 2) large metallic structures generated from decommissioning of reactor facilities and difficult to solidify in vessels, and 3) radioactive concrete waste generated from decommissioning of reactor facilities. The upper limits of radioactivity are presented for C-14, Co-60, Ni-63, Sr-90, Cs-137, alfa-emmitters, Ca-41 (for concrete) and Eu-152 (for concrete). Related laws and regulations in Japan on safe disposal of low level wastes are explained. (T.H.)

Food Safety Regulation and Firm Productivity: Evidence from the French Food Industry

OpenAIRE

Requillart, Vincent; Nauges, Celine; Simioni, Michel; Bontemps, Christophe

2012-01-01

The purpose of this article is to assess whether food safety regulations imposed by the European Union in the 2000s may have induced a slow-down in the productivity of firms in the food processing sector. The impact of regulations on costs and productivity has seldom been studied. This article contributes to the literature by measuring productivity change using a panel of French food processing firms for the years 1996 to 2006. To do so, we develop an original iterative testing procedure b...

33 CFR 165.T09-1080 - Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL. 165.T09-1080 Section 165.T09-1080 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED...

Food safety regulations in Australia and New Zealand Food Standards.

Science.gov (United States)

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

A primer of drug safety surveillance: an industry perspective. Part I: Information flow, new drug development, and federal regulations.

Science.gov (United States)

Allan, M C

1992-01-01

To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part I of this series provides a background for the discussion of drug safety by defining the basic terms and showing the flow of safety information through a pharmaceutical company. The customers for adverse drug event data are identified to provide a basis for providing quality service. The development of a drug product is briefly reviewed to show the evolution of safety data. Drug development and safety are defined by federal regulations. These regulations are developed by the FDA with information from pharmaceutical manufacturers. The intent of the regulations and the accompanying guidelines is described. An illustration from the news media is cited to show an alternative, positive approach to handling an adverse event report. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text and additional readings are presented in an appendix. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction ;of the components

NRC safety research in support of regulation, 1986

International Nuclear Information System (INIS)

1987-09-01

This report is the second in a series of annual reports responding to congressional inquiries as to the utilization of nuclear regulatory research. NUREG-1175, ''NRC Safety Research in Support of Regulation,'' published in May 1986, reported major research accomplishments between about FY 1980 and FY 1985. This report narrates the accomplishments of FY 1986 and does not restate earlier accomplishments. Earlier research results are mentioned in the context of current results in the interest of continuity. Both the direct contributions to scientific and technical knowledge and their regulatory applications, when there has been a definite regulatory outcome during FY 1986, have been described

Upholding science in health, safety and environmental risk assessments and regulations

International Nuclear Information System (INIS)

Aschner, Michael; Autrup, Herman N.; Berry, Sir Colin L.; Boobis, Alan R.; Cohen, Samuel M.; Creppy, Edmond E.; Dekant, Wolfgang; Doull, John; Galli, Corrado L.; Goodman, Jay I.; Gori, Gio B.; Greim, Helmut A.; Joudrier, Philippe

2016-01-01

A public appeal has been advanced by a large group of scientists, concerned that science has been misused in attempting to quantify and regulate unmeasurable hazards and risks. The appeal recalls that science is unable to evaluate hazards that cannot be measured, and that science in such cases should not be invoked to justify risk assessments in health, safety and environmental regulations. The appeal also notes that most national and international statutes delineating the discretion of regulators are ambiguous about what rules of evidence ought to apply. Those statutes should be revised to ensure that the evidence for regulatory action is grounded on the standards of the scientific method, whenever feasible. When independent scientific evidence is not possible, policies and regulations should be informed by publicly debated trade-offs between socially desirable uses and social perceptions of affordable precaution. This article explores the premises, implications and actions supporting the appeal and its objectives.

Food safety regulatory systems in Europe and China：A study of how co-regulation can improve regulatory effectiveness

Institute of Scientific and Technical Information of China (English)

Kevin Chen; WANG Xin-xin; SONG Hai-ying

2015-01-01

Food safety has received a great deal of attention in both developed and developing countries in recent years. In China, the numerous food scandals and scares that have struck over the past decade have spurred signiifcant food safety regulatory reform, which has been increasingly oriented towards the public-private partnership model adopted by the Europe Union’s (EU) food safety regulatory system. This paper analyzes the development of both the EU’s and China’s food safety regu-latory systems, identiifes the current chalenges for China and additionaly considers the role of public-private partnership. The success of co-regulation in the food regulatory system would bring signiifcant beneifts and opportunities for China. Finaly, this paper recommends additional measures like training and grants to improve the private’s sector effectiveness in co-regulating China’s food safety issues.

Health and safety regulation of uranium mining and milling

International Nuclear Information System (INIS)

Dory, A.B.

1980-07-01

The Canadian Atomic Energy Control Board licenses all nuclear facilities in Canada, including uranium mines and mills. The protection of health, safety and the environment is one of the requirements of each licence. A limit of 4 Working Level Months exposure to radon and radon daughters annually has been set, and guidelines for weekly or more frequent workplace monitoring have been established. Personal monitoring devices are being tested, and thermoluminescent dosimeters are to be introduced. The Board reviews its licensees' ventilation plans continuously. The staged licensing process involves the granting of the following documents: 1) ore removal; 2) underground exploration permit; 3) site and construction approval; 4) mining facility operating licence; 5) shut-down approval. Compliance with regulations and licence conditions is monitored mainly by inspectors appointed by provincial agencies, with Board staff exercising auditing fuctions. The Board involves the workers directly with their own health and safety by sending their unions copies of all relevant documents and inviting comments

Practice specific model regulations: Radiation safety of non-medical irradiation facilities. Interim report for comment

International Nuclear Information System (INIS)

2003-08-01

The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (Standards or BSS) were published as IAEA Safety Series No. 115 in 1996. This publication is the culmination of efforts over the past decades towards harmonization of radiation protection and safety standards internationally, and is jointly sponsored by the Food and Agriculture Organisation of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organisation (PAHO) and the World Health Organisation (WHO). The purpose of the Standards is to establish basic requirements for protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure (hereinafter called 'radiation safety'). The requirements are based on the principles set out in the Safety Fundamentals, published as IAEA Safety Series Nos 110 and 120. The Standards can be implemented only through an effective radiation safety infrastructure that includes adequate laws and regulations, an efficient regulatory system, supporting experts and services, and a 'safety culture' shared by all those with responsibilities for protection, including both management and workers. IAEA-TECDOC-1067, Organization and Implementation of a National Regulatory Infrastructure Governing Protection against Ionizing Radiation and the Safety of Radiation Sources, provides detailed guidance on how to establish or improve national radiation safety infrastructure in order to implement the requirements of the Standards. The TECDOC covers the elements of a radiation safety infrastructure at the national level needed to apply the Standards to radiation sources such as those used in medicine, agriculture, research, industry and education. It also provides advice on approaches to the organization and operation of

Construction and fitting of NUCEF

International Nuclear Information System (INIS)

Takeshita, Isao; Itahashi, Takayuki; Izawa, Naoki; Okazaki, Shuji

1994-01-01

NUCEF consists of two criticality experiment devices, three alpha-gamma cells, the experimental equipments contained in about 90 glove boxes and many others. The background and the course of the construction and fitting of NUCEF are described on the selection of important research, the rationalization of facilities, the integration of the criticality safety experiments facility(CSEF) and the TRU safety test facility(TRUST), the safety examination, and the construction and fitting. The whole NUCEF, the static criticality facility(STACY), the transient criticality facility(TRACY), the mock-up test of the machinery and equipment for both criticality facilities, the solution fuel preparation facility, cells and glove boxes and the equipment contained in them, the analysis facility consists of four analysis rooms, and the radioactive waste facility for gas, liquid and solid wastes are described. The classification of these facilities based on the relevant laws is shown. The way of thinking in the basic design and the detailed design is explained. The permission of nuclear reactor installation and the use of nuclear fuel substances was obtained. The design and the method of works were approved. The inspection is reported. The measures for the security are explained. (K.I.)

76 FR 27897 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port...

Science.gov (United States)

2011-05-13

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-0342] Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port Columbia River... will enforce the security and safety zone in 33 CFR 165.1318 for large passenger vessels operating in...

75 FR 16370 - Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports in Boston Captain of...

Science.gov (United States)

2010-04-01

... rule under Executive Order 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and would not create an environmental risk to...] RIN 1625-AA00, RIN 1625-AA11 Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports...

In Vivo fitness associated with high virulence in a vertebrate virus is a complex trait regulated by host entry, replication, and shedding

Science.gov (United States)

Wargo, Andrew R.; Kurath, Gael

2011-01-01

The relationship between pathogen fitness and virulence is typically examined by quantifying only one or two pathogen fitness traits. More specifically, it is regularly assumed that within-host replication, as a precursor to transmission, is the driving force behind virulence. In reality, many traits contribute to pathogen fitness, and each trait could drive the evolution of virulence in different ways. Here, we independently quantified four viral infection cycle traits, namely, host entry, within-host replication, within-host coinfection fitness, and shedding, in vivo, in the vertebrate virus Infectious hematopoietic necrosis virus (IHNV). We examined how each of these stages of the viral infection cycle contributes to the fitness of IHNV genotypes that differ in virulence in rainbow trout. This enabled us to determine how infection cycle fitness traits are independently associated with virulence. We found that viral fitness was independently regulated by each of the traits examined, with the largest impact on fitness being provided by within-host replication. Furthermore, the more virulent of the two genotypes of IHNV we used had advantages in all of the traits quantified. Our results are thus congruent with the assumption that virulence and within-host replication are correlated but suggest that infection cycle fitness is complex and that replication is not the only trait associated with virulence.

Contribution of radiobiology to the problem of general fitness

International Nuclear Information System (INIS)

Vacha, J.

1976-01-01

On the basis of the present scarce literary data it can be taken as proved that between the numerous properties of the organism usually considered as biologically valuable (high fertility, longevity, higher body weight, resistance to fasting, radiation, and infection agents, certain favorable parameters of CNS) there exist many single and multiple positive correlations. The existence of these correlations allows for the introduction of the working concept of general fitness, stimulating further interdisciplinary research in this field important both in practice and theory. Most correlated manifestations of fitness demonstrated a masked influence of the organism's genotype even though the manner of this manifestation on the phenotype level remains considerably obscure. The efficiency of the haematopoietic system is doubtless one of the mechanisms of general fitness; it is determined by the very complex coordination of several cytokinetic parameters. Important factors are the efficiency of regulation mechanisms at CNS level, the endocrine system, and the regulators of cell populations. Generally highest fitness is connected with a ''balanced'' regulation type, which is characterized by optimal activation of the homeostatic regulation mechanism. In studying the causes of general fitness a systems approach is inevitable which evaluates the levels of individual factors not ''mechanically'' or linearly but from the point of view of the needs of the whole organism and with the application of concepts established by the systems theory (e.g. by the theory of automatic regulation). The sensitivity of an organism to irradiation with ionizing radiation turns out to be a suitable criterion of its general fitness. (author)

A simple field test for the assessment of physical fitness.

Science.gov (United States)

1963-04-01

An essential factor in air safety is the physical and mental fitness of all personnel directly involved in operations of general, commercial, and military aviation. Standardization and classification of fitness, however, have not been established to ...

Hotels Make Room for Fitness.

Science.gov (United States)

Koszuta, Laurie Einstein

1986-01-01

Hotels, in hopes of gaining a competitive edge, are offering workout rooms, exercise equipment, fitness trails, and jogging tracks, but no standards have been set for safety of the facilities or staff preparedness in exercise screening, equipment use, injury prevention, or first aid. (MT)

Protectionism or Legitimate Regulations: What can Trade Partners Expect from the New US Food Safety Regime?

OpenAIRE

Nakuja, T.; Kerr, William A.

2013-01-01

In January 2011, the US passed the Food Safety Modernization Act (FSMA) which represents a major legislative initiative to revise and strengthen the regulatory regime pertaining to foodborne illness and contamination. The tightening of the regulatory regime was justified on the basis of a number of high-profile foodborne disease incidents, which are claimed to have undermined public confidence in the US food safety system. While tightening food safety regulations inevitably increase barriers ...

Periodic Safety Review in Interim Storage Facilities - Current Regulation and Experiences in Germany

International Nuclear Information System (INIS)

Neles, Julia Mareike; Schmidt, Gerhard

2014-01-01

Periodic safety reviews in nuclear power plants in Germany have been performed since the end of the 1980's as an indirect follow-up of the accident in Chernobyl and, in the meantime, are formally required by law. During this process the guidelines governing this review were developed in stages and reached their final form in 1996. Interim storage facilities and other nuclear facilities at that time were not included, so the guidelines were solely focused on the specific safety issues of nuclear power plants. Following IAEA's recommendations, the Western European Nuclear Regulator Association (WENRA) introduced PSRs in its safety reference levels for storage facilities (current version in WGWD report 2.1 as of Feb 2011: SRLs 59 - 61). Based on these formulations, Germany improved its regulation in 2010 with a recommendation of the Nuclear Waste Management Commission (Entsorgungskommission, ESK), an expert advisory commission for the federal regulatory body BMU. The ESK formulated these detailed requirements in the 'ESK recommendation for guides to the performance of periodic safety reviews for interim storage facilities for irradiated fuel elements and heat-generating radioactive waste'. Before finalization of the guideline a test phase was introduced, aimed to test the new regulation in practice and to later include the lessons learned in the final formulation of the guideline. The two-year test phase started in October 2011 in which the performance of a PSR will be tested at two selected interim storage facilities. Currently these recommendations are discussed with interested/concerned institutions. The results of the test phase shall be considered for improvements of the draft and during the final preparation of guidelines. Currently the PSR for the first ISF is in an advanced stage, the second facility just started the process. Preliminary conclusions from the test phase show that the implementation of the draft guideline requires interpretation. The aim of a

Facing new safety-challenges in a large particle accelerator experiment at CERN

CERN Document Server

Schmidt, Reiner

1999-01-01

An upgraded safety concept for CMS has been adapted to the size of the project and its organisational challenges under today's budgetary constraints, as well as to the increasing levels of risk. Strong magnetic fields and high radiation levels, including neutrons, pose additional hazards to materials, to operators, to maintenance and to ultimate deposit of activated materials. CMS also fits the insurer's risk-description for modern facilities, i.e. characterised by "higher energy density, more combustible materials and unattended operation". The regulatory environment, consisting essentially of CERN's autonomous regulations as well as of those of its host countries, also need to be satisfied with much attention. To face this challenge, seven distinct safety management tools have been identified, which are described in some detail, namely clear safety objectives, documented safety requirements, open items list, safety ( and design)reviews, safety risk analysis, enforcement of compliance and quality management....

76 FR 14590 - Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and...

Science.gov (United States)

2011-03-17

... makes it unlikely that a small business could afford to sustain the infrastructure required to perform...-AG73 Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and... facilities, infrastructure, and equipment that are intended for use by military or civilian personnel of the...

A task management system for compliance with health, safety, and environmental regulations

International Nuclear Information System (INIS)

Crump, J.J.; O'Gorman, T.P.

1992-01-01

Shell Western E and P Inc. (SWEPI) has developed a new computer system to help it comply with health, safety, and environmental (HS and E) regulations. It is a task management system that functions at the detailed inventory level. It schedules work, instructs operations, and records compliance status. This article discusses design and development of the system

The UK system for regulating the long-term safety of radioactive waste disposal

International Nuclear Information System (INIS)

Duncan, A.

1997-01-01

The general system is described for regulation of disposal of solid, long-lived radioactive wastes. The relevant Government policy is outlined, and the framework of legislation and arrangements for implementation, the associated guidance produced by regulatory bodies and the approach to assessment by regulators of a safety case for radioactive waste disposal are reported. Also, for the purposes of discussion in the Workshop, some of the practical issues are considered which are still in development in the UK in regard to regulatory methodology. (author)

Consideration of timescales in the finnish safety regulations for spent fuel disposal

International Nuclear Information System (INIS)

Ruokola, E.

2010-01-01

Esko Ruokola (STUK) presented an example of regulatory approach and explained that the Finnish spent fuel disposal program is progressing towards the construction license stage. The Government Decree on the Safety of Nuclear Waste Disposal which entered into force on 1 St December 2008 will be detailed by a STUK Guide that is currently being updated. These regulations distinguish three post-closure time periods for which different safety criteria are defined: The Environmentally Predictable Future: During this first period, extending up to several thousands of years, predictable environmental changes will occur. People may be exposed to the disposed radioactive substances only due to limited early failures of engineered barriers, due to e.g. fabrication defects. Disposal shall be so designed that as a consequence of expected evolutions: 1. The annual dose to the most exposed members of the public shall remain below 0.1 mSv. 2. The average annual doses to other members of the public shall remain insignificantly low. STUK provides guidance for the different elements of the safety assessment including potential exposure pathways, potential changes in the environment to be considered, assumption on climate change and human habits, as well as the reference conditions for the most exposed individual and people living in the surroundings. Era of Extreme Climate Changes: Beyond about 10 000 years, great climatic changes, such as permafrost and glaciation, will occur and a conservative approach is followed. For this time period, the radiation protection criteria are based on release rates of radionuclides from the geosphere to biosphere (geo-bio flux constraints). The STUK guide specifies the nuclide specific constraints for the activity release to the environment for individual radionuclides. The selected approach by STUK implies that the implementer need not to consider the biosphere scenarios when preparing his safety case for the time period discussed as the regulator

One size fits all: Safety training for 10,000 workers

International Nuclear Information System (INIS)

March, J.

1998-01-01

Last summer, the author participated in a major, orchestrated, training event at Los Alamos designed to convey some of the key components of ISM to the workforce. The event was called Safety Days 1997. The objectives were to produce a genuine training event that was logical, focused, interactive, well-written, easy to follow, and that provided people with choices rather than a rigid script. This was the first effort at the Laboratory to organize a way for middle managers to become the safety trainers of their work teams. While upper management supported the concept and product, many were satisfied with the notion of simply creating a time for workers to discuss safety concerns. This paper considers the context of Safety Days 1997, how the training was received, the response to that training, and recommendations for Safety Days 1998

Improving nuclear regulation. NEA regulatory guidance booklets volumes 1-14

International Nuclear Information System (INIS)

2011-01-01

A common theme throughout the series of NEA regulatory guidance reports, or 'green booklets', is the premise that the fundamental objective of all nuclear safety regulatory bodies is to ensure that nuclear facilities are continuously maintained and operated in an acceptably safe manner. In meeting this objective the regulator must bear in mind that it is the operator that has responsibility for safely operating the nuclear facility; the role of the regulator is to assess and to provide assurance regarding the operator's activities in terms of assuming that responsibility. The full series of these reports was brought together in one edition for the first time in 2009 and was widely found to be a useful resource. This second edition comprises 14 volumes, including the latest on The Nuclear Regulator's Role in Assessing Licensee Oversight of Vendor and Other Contracted Services. The reports address various challenges that could apply throughout the lifetime of a nuclear facility, including design, siting, manufacturing, construction, commissioning, operation, maintenance and decommissioning. The compilation is intended to serve as a knowledge management tool both for current regulators and the new nuclear professionals and organisations entering the regulatory field. Contents: Executive Summary; Regulatory Challenges: 1. The Role of the Nuclear Regulator in Promoting and Evaluating Safety Culture; 2. Regulatory Response Strategies for Safety Culture Problems; 3. Nuclear Regulatory Challenges Related to Human Performance; 4. Regulatory Challenges in Using Nuclear Operating Experience; 5. Nuclear Regulatory Review of Licensee Self-assessment (LSA); 6. Nuclear Regulatory Challenges Arising from Competition in Electricity Markets; 7. The Nuclear Regulatory Challenge of Judging Safety Back-fits; 8. The Regulatory Challenges of Decommissioning Nuclear Reactors; 9. The Nuclear Regulator's Role in Assessing Licensee Oversight of Vendor and Other Contracted Services

Fog lamp regulation as a safety measure to reduce risk in fog conditions.

NARCIS (Netherlands)

Oppe, S.

1992-01-01

This short note summarizes the relevant aspects for a decision concerning the fog lamp use regulation. Most motorway accidents in the Netherlands took place in fog conditions in the early morning hours. The safety problem in fog conditions is a serious problem caused by bad driving behaviour. The

Mapping medical marijuana: state laws regulating patients, product safety, supply chains and dispensaries, 2017.

Science.gov (United States)

Klieger, Sarah B; Gutman, Abraham; Allen, Leslie; Pacula, Rosalie Liccardo; Ibrahim, Jennifer K; Burris, Scott

2017-12-01

(1) To describe open source legal data sets, created for research use, that capture the key provisions of US state medical marijuana laws. The data document how state lawmakers have regulated a medicine that remains, under federal law, a Schedule I illegal drug with no legitimate medical use. (2) To demonstrate the variability that exists across states in rules governing patient access, product safety and dispensary practice. Two legal researchers collected and coded state laws governing marijuana patients, product safety and dispensaries in effect on 1 February 2017, creating three empirical legal data sets. We used summary tables to identify the variation in specific statutory provisions specified in each state's medical marijuana law as it existed on 1 February 2017. We compared aspects of these laws to the traditional Federal approach to regulating medicine. Full data sets, codebooks and protocols are available through the Prescription Drug Abuse Policy System (http://www.pdaps.org/; Archived at http://www.webcitation.org/6qv5CZNaZ on 2 June 2017). Twenty-eight states (including the District of Columbia) have authorized medical marijuana. Twenty-seven specify qualifying diseases, which differ across states. All states protect patient privacy; only 14 protect patients against discrimination. Eighteen states have mandatory product safety testing before any sale. While the majority have package/label regulations, states have a wide range of specific requirements. Most regulate dispensaries (25 states), with considerable variation in specific provisions such as permitted product supply sources number of dispensaries per state and restricting proximity to various types of location. The federal ban in the United States on marijuana has resulted in a patchwork of regulatory strategies that are not uniformly consistent with the approach usually taken by the Federal government and whose effectiveness remains unknown. © 2017 Society for the Study of Addiction.

Harmonization of legislation and regulations to achieve food safety: US and Canada perspective.

Science.gov (United States)

Keener, Larry; Nicholson-Keener, Sophia M; Koutchma, Tatiana

2014-08-01

Trade in food and food ingredients among the nations of the world is rapidly expanding and, with this expansion, new supply chain partners, from globally disparate geographic regions, are being enrolled. Food and food ingredients are progressively sourced more from lesser developed nations. Food safety incidents in the USA and Canada show a high unfavorable correlation between illness outbreaks and imported foods. In the USA, for example, foodborne disease outbreaks caused by imported food appeared to rise in 2009 and 2010, and nearly half of the outbreaks, associated with imported food, implicated foods imported from areas which previously had not been associated with outbreaks. Projecting supply chains into new geographical regions raises serious questions about the capacity of the new supply chain partners to provide the requisite regulatory framework and sufficiently robust public health measures for ensuring the safety of the foods and foodstuffs offered for international trade. The laws, regulation and legislation among the many nations participating in the global food trade are, at best, inconsistent. These inconsistencies frequently give rise to trade disputes and cause large quantities of food to be at risk of destruction on the often dubious pretext that they are not safe. Food safety is often viewed through a political or normative lens. Often as not, this lens has been wrought absent scientific precision. Harmonization of food safety legislation around sound scientific principles, as advocated by the US Food Safety Modernization Act (FSMA), would ultimately promote trade and likely provide for incremental improvement in public health. Among the priority roles of most national governments are the advancement of commerce and trade, preservation of public health and ensuring domestic tranquility. Achieving these priorities is fundamental to creating and preserving the wealth of nations. Countries such as the Netherlands, Canada, Germany, Japan and the USA

75 FR 36288 - Amended Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL

Science.gov (United States)

2010-06-25

...The Coast Guard is revising its safety zone and Regulated Navigation Area (RNA) on the Chicago Sanitary and Ship Canal (CSSC) near Romeoville, IL. This revised temporary interim rule reduces the areas covered by the safety zone and RNA, and places additional restrictions on vessels that may transit the RNA.

Outline of safety regulations and administrations for commercial nuclear power plants in Japan

International Nuclear Information System (INIS)

Kinichi Yamamoto

1987-01-01

Outline of safety regulations and administrations for the commercial nuclear power plants in Japan is briefly described. The strict measures for safety assurance are always taken based on the principle of defense-indepth. In the actual procedures of regulatory control, the examinations and inspections shall be performed at each individual step in the stage of applications, and also in the stage of constructions. Thus, those regulatory examinations and inspections shall be performed in detail and carefully, and at the most suitable time; resulting in an effective regulatory control by the Ministry of International Trade and Industry. (author)

Encouraging Maternal Sacrifice: How Regulations Governing the Consumption of Pharmaceuticals During Pregnancy Prioritize Fetal Safety over Maternal Health and Autonomy.

Science.gov (United States)

Donley, Greer

Pregnant women are routinely faced with the stressful decision of whether to consume needed medications during their pregnancies. Because the risks associated with pharmaceutical drug consumption during pregnancy are largely unknown, pregnant women both inadvertently consume dangerous medications and avoid needed drugs. Both outcomes are harmful to pregnant women and their fetuses. This unparalleled lack of drug safety information is a result of ill-conceived, paternalistic regulations in two areas of the law: regulations governing ethical research in human subjects and regulations that dictate the required labels on drugs. The former categorizes pregnant women as "vulnerable" and thus precludes them from most medical research. The result is that ninety-one percent of drugs lack any reliable safety information for pregnant consumers. The latter currently requires all drug labels to encourage drug avoidance during pregnancy, despite ample evidence that avoiding needed medications can harm pregnant women. On June 30, 2015, new pregnancy labeling regulations took effect. Though these regulations make important improvements, they continue to treat pregnant women unlike any population, including other unique subpopulations, such as children. As a result, the new regulations do not fix the problem of over-warning pregnant women about the risks of drug consumption. This article questions the legitimacy of both regulations and suggests three reforms for how to improve access to vital safety information: (1) amend the regulations governing ethical research in human subjects to reclassify pregnant women as non-vulnerable adults; (2) create incentives to generate safety data in pregnant women by granting a period of market exclusivity for drug companies that invest in this research; and (3) make the FDA pregnancy labeling regulations consistent with the routine FDA practice of requiring the display of balanced, human data on risk.

Revised technical regulations on radiation protection and safety of 30 September 1975

International Nuclear Information System (INIS)

1975-01-01

These revised technical regulations were made in implementation of Section 4 of Decree No 7/9038 of 30 November 1974 on radiation health and safety and lay down in detail the requirements to be met in Turkey for the use of all types of radiation sources. They set out protection plans and specify the protective equipment to be used as well as the controlled areas, i.e. areas in which radiation sources are used and which must be subject to special safety measures. Finally to obtain a license, users of radiation sources must fill in forms, the models of which are provided, giving their particulars and the specifications of the intended use and activity of the sources. (NEA) [fr

Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

Science.gov (United States)

Graydon, Patrick J.; Holloway, C. M.

2015-01-01

Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

Safety research activities for Japanese regulations of spent fuel interim storage facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

Japan Nuclear Energy Safety Organization (JNES) carries out (a) preparation of technical documents, (b) technical evaluations of standards (prepared by academic societies), etc. and (c) other R and D activities, to support Nuclear Regulation Authority (NRA: which controls the regulations for Spent Fuel Interim Storage Facilities). In 2012 fiscal year, JNES carried out dynamic test of spent fuel to examine the integrity of spent fuel under cask drop accidents, and preparation for PWR spent fuel storage test to prove long term integrity of spent fuel and cask itself. Some of these tests will be also carried out in 2013 fiscal year and after. (author)

White paper on nuclear safety in 2009

International Nuclear Information System (INIS)

2009-06-01

It deals with a general introduction of nuclear safety like general safety, safety regulation and system law and standard. It indicates of nuclear energy facility safety about general safety, safety regulation of operating nuclear power plant safety regulation under constructing nuclear power plant. It deals with radiation facility safety, monitoring of environmental radiation, radiation protection, radiation control, international cooperating on nuclear energy safety and establishment of safety regulation.

A fresh start of nuclear safety regulation and international perspective

International Nuclear Information System (INIS)

Oshima, Kenzo

2013-01-01

It should be explained more to the outside modestly the Fukushima nuclear accident would be a man-made complex disaster, which might be reluctant to do but not be neglected. Utmost efforts to change inward-looking attitude and reform safety culture should be done so as to prevent superficial reflection of the Fukushima nuclear accident. Since all nuclear regulatory functions ('3S': safety, security, safeguards) were integrated in Nuclear Regulation Authority (NRA), NRA and secretariat of NRA became more responsible for international response, and strengthening of organization system and human resources development would be an urgent necessity. This article described present stage of NRA focusing on international dimension including personal views. Overseas strong concern over the Fukushima nuclear accident and international communications were reviewed. The Fukushima nuclear accident started from natural disaster and enlarged as a man-made complex disaster with many human factors (mainly inaction, wilful negligence) overlapping and safety culture flawed. Examples of overseas and Japanese action plan to learn and absorb lessons from the Fukushima accident were introduced. NRA's started activities on inviting IAEA's IRRS and OPPAS as soon as ready, strengthening nuclear security measures, safeguards to prevent nuclear proliferation, bilateral cooperation and international advisors were also presented. (T. Tanaka)

Impact of Safety-Related Regulations on Codeine Use in Children: A Quasi-Experimental Study Using Taiwan's National Health Insurance Research Database.

Science.gov (United States)

Lin, Chih-Wan; Wang, Ching-Huan; Huang, Wei-I; Ke, Wei-Ming; Chao, Pi-Hui; Chen, Wen-Wen; Hsiao, Fei-Yuan

2017-07-01

Safety concerns regarding potential life-threatening adverse events associated with codeine have resulted in policy decisions to restrict its use in pediatrics. However, whether these drug safety communications have had an immediate and strong impact on codeine use remains in question. We aimed to investigate the impact of the two implemented safety-related regulations (label changes and reimbursement regulations) on the use of codeine for upper respiratory infection (URI) or cough. A quasi-experimental study was performed using Taiwan's National Health Insurance Research Database. Quarterly data of codeine prescription rates for URI/cough visits were reported, and an interrupted time series design was used to assess the impact of the safety regulations on the uses of codeine among children with URI/cough visits. Multivariable logistic regression models were used to explore patient and provider characteristics associated with the use of codeine. The safety-related regulations were associated with a significant reduction in codeine prescription rates of -4.24% (95% confidence interval [CI] -4.78 to -3.70), and the relative reduction compared with predicted rates based on preregulation projections was 60.4, 56.6, and 53.2% in the first, second, and third year after the regulations began, respectively. In the postregulation period, physicians specializing in otolaryngology (odds ratio [OR] 1.47, 95% CI 1.45-1.49), practicing in district hospitals (OR 6.84, 95% CI 5.82-8.04) or clinics (OR 6.50, 95% CI 5.54-7.62), and practicing in the least urbanized areas (OR 1.60, 95% CI 1.55-1.64) were more likely to prescribe codeine to children than their counterparts. Our study provides a successful example of how to effectively reduce the codeine prescriptions in children in the 'real-world' settings, and highlights areas where future effort could be made to improve the safety use of codeine. Future research is warranted to explore whether there was a simultaneous decrease in

Use of risk information to safety regulation. Reprocessing facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

A procedure of probabilistic risk assessment (PRA) for a reprocessing facility has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. A major activity is a fundamental study on a concept of serious accidents, requirements of serious accident management, and a policy of utilizing risk information for fabrication and reprocessing facilities. Other than the activity a study on release and transport of aerial radioactive materials at a serious accident in a reprocessing facility has been conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

Global regulator SoxR is a negative regulator of efflux pump gene expression and affects antibiotic resistance and fitness in Acinetobacter baumannii.

Science.gov (United States)

Li, Henan; Wang, Qi; Wang, Ruobing; Zhang, Yawei; Wang, Xiaojuan; Wang, Hui

2017-06-01

SoxR is a global regulator contributing to multidrug resistance in Enterobacteriaceae. However, the contribution of SoxR to antibiotic resistance and fitness in Acinetobacter baumannii has not yet been studied. Comparisons of molecular characteristics were performed between 32 multidrug-resistant A. baumannii isolates and 11 susceptible isolates. A soxR overexpression mutant was constructed, and its resistance phenotype was analyzed. The impact of SoxR on efflux pump gene expression was measured at the transcription level. The effect of SoxR on the growth and fitness of A. baumannii was analyzed using a growth rate assay and an in vitro competition assay. The frequency of the Gly39Ser mutation in soxR was higher in multidrug-resistant A. baumannii, whereas the soxS gene was absent in all strains analyzed. SoxR overexpression led to increased susceptibility to chloramphenicol (4-fold), tetracycline (2-fold), tigecycline (2-fold), ciprofloxacin (2-fold), amikacin (2-fold), and trimethoprim (2-fold), but it did not influence imipenem susceptibility. Decreased expression of abeS (3.8-fold), abeM (1.3-fold), adeJ (2.4-fold), and adeG (2.5-fold) were correlated with soxR overexpression (P baumannii.

The FITS model office ergonomics program: a model for best practice.

Science.gov (United States)

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

CANDU reactors, their regulation in Canada, and the identification of relevant NRC safety issues

International Nuclear Information System (INIS)

Charak, I.; Kier, P.H.

1995-04-01

Atomic Energy of Canada, Limited (AECL) and its subsidiary in the US, are considering submitting the CANDU 3 design for standard design certification under 10 CFR Part 52. CANDU reactors are pressurized heavy water power reactors. They have some substantially different safety responses and safety systems than the LWRs that the commercial power reactor licensing regulations of the US Nuclear Regulatory Commission (NRC) have been developed to deal with. In this report, the authors discuss the basic design characteristics of CANDU reactors, specifically of the CANDU 3 where possible, and some safety-related consequences of these characteristics. The authors also discuss the Canadian regulatory provisions, and the CANDU safety systems that have evolved to satisfy the Canadian regulatory requirements as of December 1992. Finally, the authors identify NRC regulations, mainly in 10 CFR Parts 50 and 100, with issues for CANDU 3 reactor designs. In all, eleven such regulatory issues are identified. They are: (1) the ATWS rule (section 50.62); (2) station blackout (section 50.63); (3) conformance with Standard Review Plan (SRP); (4) appropriateness of the source term (section 50.34(f) and section 100.11); (5) applicability of reactor coolant pressure boundary (RCPB) requirements (section 50.55a, etc); (6) ECCS acceptance criteria (section 50.46)(b); (7) combustible gas control (section 50.44, etc); (8) power coefficient of reactivity (GDC 11); (9) seismic design (Part 100); (10) environmental impacts of the fuel cycle (section 51.51); and (11) (standards section 50.55a)

Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

International Nuclear Information System (INIS)

2015-01-01

IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

International Nuclear Information System (INIS)

2013-12-01

IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

Influence of safety vlave pressure on gelled electrolyte valve-regulated lead/acid batteries under deep cycling applications

International Nuclear Information System (INIS)

Oh, Sang Hyub; Kim, Myung Soo; Lee, Jin Bok; Lee, Heung Lark

2002-01-01

Cycle life tests have been carried out to evaluate the influence of safety valve pressure on vlave regulated lead/acid batteries under deep cycling applications. Batteries were cycled at 5 hour rates at 100 % DOD, and safety valve pressure was set to 1.08 and 2.00 bar, respectively. The batteries lost 248.3 g of water for each case after about 1,200 cycles, but the cyclic performances of the batteries were comparable. Most of the gas of the battery during discharging was hydrogen, and the oxygen concentration increased to 18 % after 3 hours of charging. The micro structure of the positive active materials was completely changed and the corrosion layer of the positive grid was less than 50 μm, regardless of the pressure of the safety valve after cycle life tests. The cause of discharge capacity decrease was found to water loss and the shedding of the positive active materials. The pressure of safety valve does not give little effect to the cyclic performance and the failure modes of the gelled electrolyte valve-regulated lead acid batteries

SCAPIS Pilot Study: Sitness, Fitness and Fatness - Is Sedentary Time Substitution by Physical Activity Equally Important for Everyone's Markers of Glucose Regulation?

Science.gov (United States)

Ekblom-Bak, Elin; Ekblom, Örjan; Bolam, Kate A; Ekblom, Björn; Bergström, Göran; Börjesson, Mats

2016-07-01

Although moderate-to-vigorous physical activity (MVPA) is mainly recommended for glucose control, light physical activity (LIPA) may also have the potential to induce favorable changes. We investigated sedentary time (SED) substitution with equal time in LIPA and MVPA, and the association with markers of glucose regulation and insulin sensitivity after stratification by waist circumference, fitness and fasting glucose levels. A total of 654 men and women, 50 to 64 years, from the SCAPIS pilot study were included. Daily SED, LIPA and MVPA were assessed using hip-worn accelerometers. Fasting plasma glucose, insulin and HOMA-IR were determined. Substituting 30 min of SED with LIPA was significantly associated with 3.0% lower fasting insulin values and 3.1% lower HOMA-IR values, with even lower levels when substituting SED with MVPA. Participants with lower fitness and participants with high fasting glucose levels benefited significantly more from substituting 30 min of SED with LIPA compared with participants with normal to high fitness levels and participants with normal glucose levels, respectively. LIPA, and not only MVPA, may have beneficial associations with glucose regulation. This is of great clinical and public health importance, not least because it may confer a higher compliance rate to regular PA.

Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

International Nuclear Information System (INIS)

2007-01-01

The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer-based systems used in Nuclear Power Plants for safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national policies and in revisions of guidelines; - as a reference in safety cases and demonstrations of safety of software based systems; - as guidance for system design specifications by manufacturers and major I and C suppliers on the international market. The task force decided at an early stage to focus attention on computer based systems used in Nuclear Power Plants for the implementation of safety functions; namely, those systems classified by the IAEA as 'Safety Systems'. Therefore, recommendations of this report - except those of chapter 1.11 - primarily address 'safety systems' and not 'safety related systems'. It was felt that the most difficult aspects of the licensing of digital programmable systems are rooted in the specific properties of the technology. The objective was therefore to delineate practical and technical licensing guidance, rather than discussing or proposing basic principles or requirements. The design requirements and the basic principles of nuclear safety in force in each member state are assumed to remain applicable. This report represents the consensus view achieved by the experts who contributed to the task force. It is the result of what was at the time of its initiation a first attempt at the international level to achieve consensus among nuclear regulators on practical methods for

76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

Science.gov (United States)

2011-01-19

... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

International laser-safety regulations: a status update

Science.gov (United States)

Weiner, Robert M.

1990-07-01

There is an increase in international laser safety requirements as part of the emphasis on world-wide standardization of products and regulations. In particular the documents which will evolve from the 1992 consolidation efforts of the European Community (EC) will impact both laser manufacturers and users. This paper provides a discussion of the current status of the various laser radiation standards. NORTH AMERICAN REQUIREMENTS United States Requirements on manufacturers from the Food and Drug Administration (FDA) have been in effect since 1975. The Center for Devices and Radiological Health (CDRH) within that agency ensures that these mandatory requirements [1] are satisfied. The CDRH regulations include the division of products into classes depending on their potential for hazard criteria for power measurement and requirements for product features labels and manuals and records and reports. Manufacturers must test products and certify that they comply with the CDRH requirements. User requirements are found in a standard published by the American National Standards Institute (ANSI) and in requirements from several individual states. Specific ANSI standards have also been published for fiber communications systems [34] and for lasers in medical applications [35]. Please note that the Appendix includes additional information on the standards discussed in this paper including sources for obtaining the documents. Canada In the past Canada has had requirements for two specified product categories (bar code scanners and educational lasers) [26 These will be replaced

Resolution No. 6/04 Regulations for the recognition of the competence of services for radiation safety

International Nuclear Information System (INIS)

2004-01-01

This Regulation aims to establish the rules that govern the process to recognize the competence of services for radiation safety, they are no authorized under Resolution No. 25, dated May 29, 1998, the Ministry of Science, Technology and Environment, A uthorization Regulation Practices Associated with Use of Ionizing Radiation , in order to ensure that services that are related to the practices associated with the use of nuclear energy, with the requisite expertise. This Regulation applies to all natural or legal persons performing or purporting to perform service activities for radiation safety in the country. These services are: 2.1. Individual Radiation Monitoring Services, in one or more of the following areas: 2.1.1. Control of external exposure a) Electromagnetic Radiation. b) beta radiation. c) neutron radiation. 2.1.2. Control of internal contamination a) Determination of internal contamination by direct measurements. b) Determination of internal contamination by analysis of biological samples. c) Monitoring of air, personal and total. 2.2. Service environmental measurements and samples. 2.3. Service control radioactive contamination in foods. 2.4. Service measuring dose rate, surface contamination and air pollution. 2.5. Calibration and verification of equipment. 2.6. Service courses in radio-logical protection. 2.7. Consultancy services in radiation protection. 2.8. Service control radioactive contamination in scrap. 2.9. Service quality control equipment that is used in the practices associated with the use of ionizing radiation. 2.10. Any other service in the field of radiation safety in scope and interest of end-National Center for Nuclear Safety.

Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material. Safety Guide (Spanish Edition)

International Nuclear Information System (INIS)

2010-01-01

This Safety Guide provides recommendations on achieving and demonstrating compliance with IAEA Safety Standards Series No. TS-R-1, Regulations for the Safe Transport of Radioactive Material, 2005 Edition, establishing safety requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material; these include the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Series No. TS-G-1.1, 2002 Edition

Cooperative development of nuclear safety regulations, guides and standards based on NUSS

International Nuclear Information System (INIS)

Pachner, J.; Boyd, F.C.; Yaremy, E.M.

1984-10-01

In 1983, the Atomic Energy Control Board and Atomic Energy of Canada Limited conducted a study of a possible joint program involving Canada, a nuclear power plant importing Member State and the IAEA for the development of the national nuclear safety regulations and guides based on NUSS documents. During the study, a work plan with manpower estimates for the development of design was prepared as an investigatory exercise. The work plan suggests that a successful NUSS implementation in developing Member States will require availability of significant resources at the start of the program. The study showed that such a joint program could provide an effective mechanism for transfer of nuclear safety know-how to the developing Member States through NUSS implementation

Accidents and Apathy: The Construction of the 'Robens Philosophy' of Occupational Safety and Health Regulation in Britain, 1961-1974.

Science.gov (United States)

Sirrs, Christopher

2016-02-01

The 1972 Robens Report is widely regarded to have provided the underlying rationale for the 'modern' system of occupational health and safety regulation in Britain, embodied in the Health and Safety at Work Act (HSW Act) 1974. The HSW Act advanced a new, more flexible system of regulation, premised on the ideal of self-regulation by industry. This article advances a more nuanced historical understanding of the Report and its ethos-the 'Robens philosophy'-than hitherto developed, situating its assumptions about accidents, regulation and the role of the state in the social, economic and political context of Britain in the 1960s and early 1970s. Highlighting the interaction between these trends and long-established regulatory practices, the article argues that the turn to 'self-regulation' heralded by the Robens Report was highly convincing from a political and regulatory perspective at the time it was promulgated.

Regulatory risks associated with nuclear safety legislation after Fukushima Daiichi Nuclear Accident in Japan. Focus on legal structure of the nuclear reactor regulation act

International Nuclear Information System (INIS)

Tanabe, Tomoyuki; Maruyama, Masahiro

2016-01-01

Nuclear safety regulations enforced after Fukushima Daiichi Nuclear Accident under the Nuclear Reactor Regulation Act face the following regulatory problems that involve potential risk factors for nuclear businesses; 1) 'entity based regulation' unable to cope with business cessation or bankruptcy of the entity subject of regulation, 2) potential risk of the Nuclear Regulation Authority's inappropriate involvement in nuclear industry policy beyond their duty, and 3) compliance of backfits under vague regulations. In order to alleviate them, this report, through analyzing these regulatory problems from the view point of sound development of the nuclear industry, proposes the following regulatory reforms; (1) To clarify the rule for industry policy in nuclear regulations and enable the authority, Ministry of Economy, Trade and Industry, to choose most appropriate industrial policy measure. (2) Through establishing safety goals as measures to promote continuous improvement of nuclear safety regulations, to stimulate timely adjustments of the regulations, and to introduce a legal mechanism into the nuclear regulation systems under which validity of administrative law and its application can be checked. (author)

The impact of regulations, safety considerations and physical limitations on research progress at maximum biocontainment.

Science.gov (United States)

Shurtleff, Amy C; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S; Bavari, Sina

2012-12-01

We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

Directory of Open Access Journals (Sweden)

Jean Patterson

2012-12-01

Full Text Available We describe herein, limitations on research at biosafety level 4 (BSL-4 containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

Science.gov (United States)

Shurtleff, Amy C.; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S.; Bavari, Sina

2012-01-01

We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review. PMID:23342380

The role of the Gosatomnadzor of Russia in national regulating of safety of radiation sources and security of radioactive materials

International Nuclear Information System (INIS)

Mikhailov, M.V.; Sitnikov, S.A.

2001-01-01

As at the end of 1999, the Gosatomnadzor of Russia supervised 6551 radiation sources, including 1285 unsealed sources with individual activity from a minimal level to 1x10 12 Bq and a total activity of 585x10 12 Bq, and also 5266 sealed sources with individual activity from 30 to 1x10 17 Bq and the total activity of more than 11x10 17 Bq. A national infrastructure has been created in the Russian Federation in order to regulate the safety of nuclear energy use. The infrastructure includes the legal system and the regulatory authorities based on and acting according to it. The regulation of radiation safety, including assurance of radiation source safety and radioactive material security (management of disused sources, planning, preparedness and response to abnormal events and emergencies, recovery of control over orphan sources, informing users and others who might be affected by lost source, and education and training in the safety of radiation sources and the security of radioactive materials), is realized within this infrastructure. The legal system includes federal laws ('On the Use of Nuclear Energy' and 'On Public Radiation Safety'), a number of decrees and resolutions of the President and the Government of the Russian Federation, federal standards and rules for nuclear energy use, and also departmental and industrial manuals and rules, State standards, construction standards and rules and other documents. The safety regulation tasks have been defined by these laws, according to which regulatory authorities are entrusted with the development, approval and putting into force of standards and rules in the nuclear energy use, with issuing licenses for carrying out nuclear activities, with safety supervision assurance, with review and inspection implementation, with control over development and realization of protective measures for workers, population and environment in emergencies at nuclear and radiation hazardous facilities. Russian national regulatory

For improvements of issues behind food safety regulations implemented following the Fukushima nuclear accident

International Nuclear Information System (INIS)

Hamada, Nobuyuki; Ogino, Haruyuki

2011-01-01

The great quake and a subsequent tsunami seriously damaged the Fukushima nuclear power plants on 11 March 2011, followed by radionuclide releases outside the crippled reactors. Regulatory limits stipulated as 'provisional regulation values' were set to minimize internal exposure via ingestion of contaminated food and drink. Tap water, raw milk, vegetables, seafood and tea exceeded the limit, and distribution and/or consumption of these stuffs were temporality restricted. It took 7 and 11 days to set the provisional regulation values and to order the first restriction after the declaration of nuclear emergency situations, respectively. All restrictions began within 25 days after the first excess in each item, but the commencement of restrictions was concomitant with the social dislocations. All restrictions for tap water were withdrawn within 51 days, but restrictions for food have yet to be lifted. Among all items, maximum levels were detected in leafy vegetables (54,100 Bq/kg of 131 I, 82,000 Bq/kg of 134 Cs and 137 Cs). Most provisional regulation values were adopted from the preexisting 'index values'. Index values were logically designed and practically convenient. However, food and radionuclides were not comprehensively covered, and the same value was given to emergency and existing exposure situations. Also, different provisional regulation values were set for infants and others. In this respect, we here propose the concept of the 'graded triphasic reference level system' to optimize food safety regulations in early, intermediate and late phases following the accident, where each example phase-specific reference level value is provided. This paper focuses on the logic and issues behind such food safety regulations. The food monitoring data of 24,685 samples and the enforced restrictions shall also be outlined predicated on the information available as of 12 June 2011. (author)

Australian Experience in Implementing Transport Safety Regulations and Transport Security Recommendations

International Nuclear Information System (INIS)

Sarkar, S.

2016-01-01

Australian transport safety and security regulatory framework is governed by Commonwealth, State and Territory legislations. There are eleven competent authorities in Australia that includes three Commonwealth authorities, six states and two territory authorities. IAEA Regulations for Safe Transport of Radioactive Material (TS-R-1, 2005 edition) is applied through Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) Code of Practice for Transport of Radioactive Material 2008 by road, rail and waterways not covered by marine legislations. All states and territories apply this Transport Code through their regulatory system. For air transport, the Civil Aviation Act 1988 adopts the requirements of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air DOC 9284, which also adopts TS-R-1. The security of radioactive material in air transport is achieved via the Aviation Transport Security Act 2004. For sea transport Australian Marine Order 41 applies the requirements of IMDG (International Maritime Dangerous Goods) Code which also adopts TS-R-1. The security of radioactive material (nuclear material) is governed by two Commonwealth Agencies namely, ARPANSA and ASNO (Australian Safeguards and Non-proliferation Office) . ARPANSA regulates the security of radioactive sources through ARPANSA Code of Practice for the Security of Radioactive Sources 2007 which is based on the IAEA Draft Security Series. ASNO regulates security of nuclear material including U, Th and Pu through the Nuclear Non-Proliferation (Safeguards) Act, and the object of which is to give effect to certain obligations that Australia has as a party to the NPT, Australia’s safeguards agreement with the IAEA, and other bilateral safeguards agreements and certain obligations that Australia has as a party to the Convention for the Physical Protection of Nuclear Materials (CPPNM). This paper presents the effectiveness of regulatory approaches for safe and secure

Science and regulation 50 years hand in hand in radiation safety work in Finland

International Nuclear Information System (INIS)

Laaksonen, Jukka; Mustonen, Raimo; Ikaheimonen, Tarja

2008-01-01

The first predecessor of the present Nuclear and Radiation Safety Authority of Finland (STUK) was founded in 1958 to regulate the use of radiation and to study artificial radiation in the environment. In those days radiation was used only in medical and industrial applications and there were also first indications that atmospheric nuclear tests might cause significant exposure to radiation, especially in the Northern Finland. Focusing activities of the new Institute of Radiation Physics, as STUK was called in those days, to these two activities laid foundation for the operations culture where regulators and scientists work together to achieve the optimum level of safety. Since those early days STUK has continued this operations model and developed it to include also other activities. Today STUK is the national regulatory body for both radiation protection and nuclear safety, but at the same time it is a research organisation and an expert body, supporting for instance the national emergency preparedness for nuclear and radiation accidents. This has brought great synergy benefits and given STUK an opportunity to use the limited national resources in the most effective way. This paper describes the main functions of STUK in its fifty years' operation and highlights the arguments favouring to keep regulatory and research activities as close to each other as possible. In today's world nuclear safety, radiation protection, and radiological preparedness and security issues are so closely connected with each other that organisations dealing with them should have comprehensive knowledge about all of them. (author)

SAFETY ASSESSMENT AND LIABILITY REGULATIONS IN THE CONTEXT OF GENETICALLY MODIFIED FOOD IN THE BRICS COUNTRIES

Directory of Open Access Journals (Sweden)

Sh. K. Balashanmugam

2018-01-01

Full Text Available International trade of food products is expected to increase rapidly with the widespread introduction of genetically modified (GM food. There will be greater participation of developing countries based on investment as well as research and development. Investment in research and development and commercial production of GM crops is high in Asia, particularly in India and China, but also in Latin American countries, such as Brazil, and on the African continent, especially in South Africa. Despite the merits, the introduction of GM foods in the world market has continued to raise public concerns touching upon health, legal, social, ethical and environmental issues. Especially, the issue of contamination is considered asignificant threat at many stages of development of GM food. Transboundary aspects and certain aspects of the components of the food safety system such as safety assessment, liability and redress are still not completely addressed. The present study is the systematic review of the extent of the development of legislation and institutional mechanisms in relation to safety assessment and liability mechanisms for regulating the emerging GM foods in the developing countries of BRICS. Additionally, the comparison of the components of national food safety systems of Brazil, Russia, India, China and South Africa reveals differences in policy and regulation in relation to GM food.

Barriers to Construction Health and Safety Self-regulation: A Scoping Case of Nigeria

Directory of Open Access Journals (Sweden)

Umeokafor Nnedinma

2017-03-01

Full Text Available This scoping study builds on the recent uncovering that in terms of health and safety (H&S, the Nigerian construction industry is self-regulated in various forms, not unregulated and that the size of company can further explain H&S self-regulation. Consequently, the barriers identified through literature review were assessed using questionnaires. Analysis of the data collected from construction practitioners in Nigeria shows that ‘economic factors’ mostly explains the barriers to construction H&S self-regulation. This is followed by the ‘ability to self-regulate’ and ‘lack of awareness’. Furthermore, the results show significant differences among small, medium and large construction contractors on seven factors of which include ‘normative case’ factors, ‘H&S is a duty’, ‘H&S is the right thing’ and ‘unfair H&S standards or legislation’. Although a scoping study, the study draws attention to the barriers to construction H&S self-regulation in Nigeria and demonstrates an alternative to state regulation of H&S.

Mines Safety Control (Radiation Protection) Regulations (Northern Territory) No. 30 of 25 September 1981

International Nuclear Information System (INIS)

1981-01-01

These Regulations, pursuant to the Mines Safety Control Act, are intended to prevent or limit the radiation risk to persons involved in the mining or milling of radioactive ores. The duties and responsibilities imposed by the Regulations on owners, managers and employees of the mines are identical with those set forth in the 1980 Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores which establishes radiation standards and exposure limits, requires health surveillance of employees and provides for the management of radioactive wastes. (NEA) [fr

Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

Science.gov (United States)

Falk, A.; Hartl, S.; Sinner, F.

2013-04-01

As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R&D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R&D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

New Safety rules

CERN Multimedia

Safety Commission

2008-01-01

The revision of CERN Safety rules is in progress and the following new Safety rules have been issued on 15-04-2008: Safety Procedure SP-R1 Establishing, Updating and Publishing CERN Safety rules: http://cern.ch/safety-rules/SP-R1.htm; Safety Regulation SR-S Smoking at CERN: http://cern.ch/safety-rules/SR-S.htm; Safety Regulation SR-M Mechanical Equipment: http://cern.ch/safety-rules/SR-M.htm; General Safety Instruction GSI-M1 Standard Lifting Equipment: http://cern.ch/safety-rules/GSI-M1.htm; General Safety Instruction GSI-M2 Standard Pressure Equipment: http://cern.ch/safety-rules/GSI-M2.htm; General Safety Instruction GSI-M3 Special Mechanical Equipment: http://cern.ch/safety-rules/GSI-M3.htm. These documents apply to all persons under the Director General’s authority. All Safety rules are available at the web page: http://www.cern.ch/safety-rules The Safety Commission

The History of Infant Formula: Quality, Safety, and Standard Methods.

Science.gov (United States)

Wargo, Wayne F

2016-01-01

Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

Cerebrospinal fluid protein and glucose examinations and tuberculosis:
Will laboratory safety regulations force a change of practice?

Science.gov (United States)

Tormey, William P; O'Hagan, Christopher

2015-01-01

Cerebrospinal fluid (CSF) protein and glucose examinations are usually performed in chemical pathology departments on autoanalysers. Tuberculosis (TB) is a group 3 biological agent under Directive 2000/54/EC of the European Parliament but in the biochemistry laboratory, no extra precautions are taken in its analysis in possible TB cases. The issue of laboratory practice and safety in the biochemical analyses of CSF specimens, when tuberculosis infection is in question is addressed in the context of ambiguity in the implementation of current national and international health and safety regulations. Additional protective measures for laboratory staff during the analysis of CSF TB samples should force a change in current laboratory practice and become a regulatory issue under ISO 15189. Annual Mantoux skin test or an interferon-γ release assay for TB should be mandatory for relevant staff. This manuscript addresses the issue of biochemistry laboratory practice and safety in the biochemical analyses of CSF specimens when tuberculosis infection is in question in the context of the ambiguity of statutory health and safety regulations.

Medicalising disability? Regulation and practice around fitness assessment of disabled students and professionals in nursing, social work and teaching professions in Great Britain.

Science.gov (United States)

Sin, Chih Hoong

2009-01-01

The reliance on medical information and on occupational health (OH) professionals in ascertaining fitness of applicants and registrants within the educational and employment contexts may lead to the medicalisation of disability. The Disability Rights Commission's Formal Investigation into the regulation of three public sector professions of nursing, social work and teaching in Britain sheds light on the nature of regulatory fitness requirements and how these are implemented in practice. The multi-pronged investigation included a review of relevant statutory and regulatory frameworks, formal written and oral evidence submitted by key stakeholder organisations and research into formal and informal fitness assessments within the education and employment contexts. There are varied and vague fitness requirements in all three professions. OH professionals figure prominently in formal and informal decision-making around fitness within education and employment settings, regardless of regulatory prescriptions. There is a multitude of approaches. There are, however, particular issues in the deployment of OH expertise within the employment setting. The determination of fitness should not rely solely on medical information. Blanket fitness requirements that are not contextualized against specific competencies for particular jobs are inappropriate. More collaborative and integrated working is necessary, particularly in exploring how reasonable adjustments may be provided to enable safe and effective practice. The positive spirit of the disability equality duty should be embraced.

Fitness for duty: A tried-and-true model for decision making

International Nuclear Information System (INIS)

Horn, G.L.

1989-01-01

The US Nuclear Regulatory Commission (NRC) rules and regulations pertaining to fitness for duty specify development of programs designed to ensure that nuclear power plant personnel are not under the influence of legal or illegal substances that cause mental or physical impairment of work performance such that public safety is compromised. These regulations specify the type of decision loop to employ in determining the employee's movement through the process of initial restriction of access to the point at which his access authorization is restores. Suggestions are also offered to determine the roles that various components of the organization should take in the decision loop. This paper discusses some implications and labor concerns arising from the suggested role of employee assistance programs (EAPs) in the decision loop for clinical assessment and return-to-work evaluation of chemical testing failures. A model for a decision loop addressing some of the issues raised is presented. The proposed model has been implemented in one nuclear facility and has withstood the scrutiny of an NRC audit

Guide to Radiation Safety regulations and guidelines (SSMFS 2012:3) on the management of contaminated ash

International Nuclear Information System (INIS)

Moere, Hans

2012-06-01

Energy producers burning peat or wood fuel can obtain ash that is contaminated with cesium-137 from Tjernobyl accident or naturally occurring uranium, thorium and potassium, from some peat bogs. Regulations (SSMFS 2012:3) have been developed which regulates how the contaminated ash should be handled. The regulations affect all who handle contaminated ash in incinerators, landfills, public works, ash recycling, transportation or recycling of ash in other ways. Radiation Safety regulations and guidelines (SSMFS 2012:3) on the management of contaminated ash will apply from 1 September 2012. At that time Regulations (SSMFS 2008:16) on the management of ash that is contaminated with cesium-137, ceases to apply. The contents have been incorporated into the new regulations. This report provides explanations and guidance to the Regulations in order to facilitate the practical application. This guidance is not legally binding

After the Fukushima Daiichi Accident, Extending the Human and Organizational Factors (HOF) Framework to Safety Regulation

International Nuclear Information System (INIS)

Chanton, O.; Mangeon, M.; Jeffroy, F.

2016-01-01

The accident of Fukushima-Daichi is regarded as a product of multiple failures of the nuclear risks regulation system in Japan and more particularly as a failure of the regulatory system (authorities, regulator and operator) to take into account seismic risks and flood risks caused by tsunamis. This statement conducted the French institute for radiological protection and nuclear safety (IRSN) to develop a research program dedicated to the study of the way the French nuclear regulatory system developed and addresses flood risks. A regulatory system rests upon a number of institutional and organizational devices and upon normative tools, such as technical standards or guidelines. The aim of these normative tools is to guide NPP operators during both stages of risks identification and characterisation and of the design of protections against risks. These instruments have profound and multiple effects on the stakeholders involved. They affect the design of nuclear facilities, significantly influence the safety demonstration of a plant, but also the manner in which the actions implemented by the operator are evaluated and their reality controlled by the regulator.

On safety management and nuclear safety - A frame of reference for studies of safety management with examples from non-nuclear contects of relevance for nuclear safety

International Nuclear Information System (INIS)

Svenson, O.; Allwin, P.; Salo, I.

2004-03-01

The report includes three case studies of safety management. The studies are presented as chapters, but are written in a format that makes them easy to read separately. Two of the studies cover regulators (the Swedish Civil Aviation Safety Authority, Luftfartsinspektionen) and the Norwegian Petroleum Directorate) and one a regulated activity/industry (a car manufacturer, Volvo Car). The introduction outlines a living system framework and relates this to concepts used in organizational management. The report concludes with some findings with potential relevance for safety management in the nuclear power domain. In the next phase of the work, the regulated counterparts of the regulators here will be investigated in addition to a fourth case study of a regulated activity/industry. (au)

Resolution 12/2004 Guideline for implementation of safety regulations in the practice of industrial radiography

International Nuclear Information System (INIS)

2004-01-01

1. This guide is intended to clarify, in relation to its application in practice Industrial Radiography, the provisions of: a) Joint Resolution CITMA-MINSAP, of December 15, 2002, Regulation: B asic Radiation Safety Standards , hereinafter Regulation NBS; b) Resolution No. 25/98 of CITMA Regulation. A uthorization Practices Associated with the use of ionizing radiation , hereinafter Resolution 25/98; c) Resolution 121/2000 CITMA Regulation: F or the Safe Transport of Radioactive materials , hereinafter Resolution 121/2000; and in d) Joint Resolution CITMA-MINSAP, Regulation: S election, Training and Authorization of personnel performing Employment Practices Associated Radiation Ionizing . 2. For the purposes of applying this Guide considers the practice of Industrial Radiography includes the following techniques: a) Industrial Radiography with use of gamma radiation sources; b) crawler radiography equipment; and c) Industrial Radiography with X-rays

International regulations on labour health and safety applied to fishing and maritime transport sectors. Are maritime workers under-protected.

Science.gov (United States)

Rodríguez, Julio Louro; Portela, Rosa Mary de la Campa; Pardo, Guadalupe Martín

2012-01-01

The work activity developed on board is of great importance in our nearby environment, and it has a series of peculiarities that determine the service rendering of sea workers. On the other hand, work at sea is developed on an international basis. Nowadays such work becomes a completely globalised industrial sector in relation to the elements that make up the ship's operation, including manpower. For that reason several relevant international organisations have paid attention to this industrial sector and have adopted a broad regulation on this matter. In the case of the European Union, the Community procedure emphasises enormous interest in providing specific and comprehensive training to seafarers, as well as in regulating working time on board with the aim of minimising the safety problems caused by fatigue. In the present article a schematic presentation of regulations on workers' health and occupational safety protection derived from the European Union, the International Maritime Organisation, and the International Labour Organisation has been done. Also it shows what parts of these regulations are not applicable to the work on board, and it reveals how the workers of fishing and maritime transport sectors are under-protected with regard to the guarantee of their health and occupational safety compared to workers in other sectors.

The institutional fit of peatland governance in Indonesia

NARCIS (Netherlands)

Uda, Saritha Kittie; Schouten, Greetje; Hein, Lars

2018-01-01

The Government of Indonesia has published a number of policies and regulations to better manage its vast amount of tropical peatland, yet the degradation and conversion of Indonesian peatlands still continues. This paper analyses the institutional fit between Indonesian regulations related to

Use of a Graded Approach in the Application of the Safety Requirements for Research Reactors. Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-11-15

The IAEA's Statute authorizes the Agency to 'establish or adopt? standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

Safety Regulation Implemented by Gosatomnadzor of Russia

International Nuclear Information System (INIS)

Gutsalov, A.T.; Bukrinsky, A.M.

2001-01-01

The principles and approaches used by Gosatomnadzor of Russia in establishing safety goals are described. The link between safety goals and safety culture is demonstrated. Information on nuclear regulatory activities in Russia is also presented

What Can We Learn about Workplace Heat Stress Management from a Safety Regulator Complaints Database?

Science.gov (United States)

Hansen, Alana; Pisaniello, Dino; Varghese, Blesson; Rowett, Shelley; Hanson-Easey, Scott; Bi, Peng; Nitschke, Monika

2018-03-06

Heat exposure can be a health hazard for many Australian workers in both outdoor and indoor situations. With many heat-related incidents left unreported, it is often difficult to determine the underlying causal factors. This study aims to provide insights into perceptions of potentially unsafe or uncomfortably hot working conditions that can affect occupational health and safety using information provided by the public and workers to the safety regulator in South Australia (SafeWork SA). Details of complaints regarding heat exposure to the regulator's "Help Centre" were assembled in a dataset and the textual data analysed thematically. The findings showed that the majority of calls relate to indoor work environments such as kitchens, factories, and warehouses. The main themes identified were work environment, health effects, and organisational issues. Impacts of hot working conditions ranged from discomfort to serious heat-related illnesses. Poor management practices and inflexibility of supervisors featured strongly amongst callers' concerns. With temperatures predicted to increase and energy prices escalating, this timely study, using naturalistic data, highlights accounts of hot working conditions that can compromise workers' health and safety and the need for suitable measures to prevent heat stress. These could include risk assessments to assess the likelihood of heat stress in workplaces where excessively hot conditions prevail.

Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

International Nuclear Information System (INIS)

Falk, A; Hartl, S; Sinner, F

2013-01-01

As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R and D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R and D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

Regulation of occupational health and safety in the semiconductor industry: enforcement problems and solutions.

Science.gov (United States)

Watterson, Andrew

2006-01-01

Reports of high incidences of occupational illnesses in the semiconductor industry should have triggered global investigations and rigorous inspection of the industry. Yet semiconductor plants remain essentially unregulated. Health and safety standards are inadequate and enforcement is lax. Roles for stakeholders in laying down good practice, monitoring, and regulating are proposed, and obstacles are described. Effective regulation has advantages for the industry as well as workers. Conditions for best practice include education at all levels, protection and support for labor inspectors, government commitment to enforcing laws, recognition of the right of workers to organize, and recognition of their rights.

Aspects of the state safety regulation dealing with management of radioactive wastes from nuclear vessels

International Nuclear Information System (INIS)

Markarov, Valentin G.

1999-01-01

According to this presentation, the Constitution of the Russian Federation states that nuclear power engineering and fissile materials are under the jurisdiction of the Russian Federation. But there is no federal law with detailed directions for radioactive waste (RW) management, which thus comes under the Federal law ''On Use of Atomic Energy''. This law defines the legal basis and principles of regulating the relations occurring during RW management and sets some general requirements. RW management safety is regulated by the federal norms and rules (1) Radiation Safety Norms (NRB-96), Basic Sanitary Rules (OSP-72, 87) and (3) Sanitary Rules for RW Management (SPORO-85), etc. A number of normative documents on RW management will be put in force in 1999. For work in the field of RW management, licence must in general be obtained from Gozatomnazdor of Russia. The conditions for receiving a license for the management of RW from vessels are presented

The Swedish Nuclear Power Inspectorate's Regulations concerning Safety in connection with the Disposal of Nuclear Material and Nuclear Waste. General Recommendations concerning the Application of the Swedish Nuclear Power Inspectorate's Regulations above

International Nuclear Information System (INIS)

2002-06-01

An english translation of the original Swedish regulations concerning the safety in disposal of nuclear wastes is published in this booklet, together with recommendations on how these regulations can be applied

Implementation of ICRP-60, BBS-115 and the patient directives in radiation safety regulations of TAEK

International Nuclear Information System (INIS)

Okyar, H.B.; Vural, M.

2001-01-01

clearance procedures. The preamble to the Basic Safety Standards states that it is presumed in the Standards that Governments have an adequate national infrastructure in place in order to discharge their responsibilities for radiation protection and safety. In Turkey, the relevant national authority for regulating activities involving radioactive sources is the Turkish Atomic Energy Authority (TAEK). The structure of TAEK and its legislation will be introduced. Radiation Safety Regulation (Official Journal no.: 20983) which was issued in 6 September 1991 was revised and issued in 24 March 2000 (Official Journal no.: 23999). The revised version of the Radiation Safety Regulation based on BSS-115 and EC Directives includes definitions, exemptions, responsibilities, dose limits (significant decrease in the limits follows the recommendations of ICRP-60), redefinition of controlled and supervised areas, import and re-export procedures of radioactive materials, redefinition of licensing procedures, limitations in import radiation generators used in medicine, quality control, guidance levels of dose, dose rate and activity for medical exposures (including diagnostic radiological procedures, diagnostic procedures in nuclear medicine), dose levels in interventions and guidelines for intervention levels and action levels in emergency exposure situations. (author)

Finite impulse testing (FIT) system for Emergency Cooling System (ECS) in Dhruva

International Nuclear Information System (INIS)

Punekar, Parag; Ramkumar, N.; Kulkarni, U.S.; Darbhea, M.D.; Bharadhwaj, G; Jangra, L.R.; Geetha, Patil; Das, Shantanu; Sonnis, S.T.; Trevedi, P.; Patil, M.B.; Biswas, B.B.

2006-01-01

Finite Impulse Testing (FIT) system for Emergency Cooling System (ECS) is used to check healthiness of ECS logic circuits in an online mode. The ECS is an important safety system that ensures the cooling of reactor core during shutdown state of Main Coolant Pumps (MCPs), and hence FIT-ECS that monitors the health of ECS logic circuits in an online (real time) mode is an important part of it. Based on a Safety Related Unusual Occurrence in ECS system due to the malfunction of its earlier single channel FIT system, the new FIT-ECS system has been designed with new features and is commissioned. The FIT-ECS system feeds the simulated input signals (fine impulses of nominal width 575 μS) to the ECS logic circuits and read the outputs. These output (predicted) signals from ECS logic circuit are processed in the FIT-ECS system and in event of any discrepancy, the FIT-ECS system displays fault signature on local panel, detailed information of the fault on Operator Console (OC), and generates an alarm 'ECS logic Fail' in the control room. FIT-ECS also monitors the inputs and outputs of ECS logic circuit. All the information required is stored as a database that can be subsequently displayed in various formats. ECS system is designated as Category I-A system and is a hardwired system and FIT-ECS monitors the healthiness of the logics of the ECS System is a computerized system. As per IEC 1226, FIT-ECS is categorized as Category I-B system. This paper provides technical information on FIT-ECS system design, its important features, the testing carried on the FIT-ECS system, interconnections of FIT-ECS and ECS and the commissioning experience of FIT-ECS system. (author)

Disposal of Radioactive Waste. Specific Safety Requirements

International Nuclear Information System (INIS)

2011-01-01

The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

76 FR 80850 - Special Local Regulations and Safety Zones; Recurring Events in Northern New England

Science.gov (United States)

2011-12-27

..., design, or operation; test methods; sampling procedures; and related management systems practices) that... safety of life or property. (f) For all power boat races listed, vessels operating within the regulated... that will not interfere with the progress of the event. (g) For all regattas and boat parades listed...

77 FR 15323 - Special Local Regulations and Safety Zone; War of 1812 Bicentennial Commemorations, Chesapeake...

Science.gov (United States)

2012-03-15

... National Technology Transfer and Advancement Act (NTTAA) (15 U.S.C. 272 note) directs agencies to use...] RIN 1625-AA08, AA00 Special Local Regulations and Safety Zone; War of 1812 Bicentennial Commemorations... Chesapeake Bay and Port of Baltimore, Maryland for War of 1812 Bicentennial Commemorations activities. This...

33 CFR 165.1319 - Safety Zone Regulations, Seafair Blue Angels Air Show Performance, Seattle, WA.

Science.gov (United States)

2010-07-01

... Blue Angels Air Show Performance, Seattle, WA. 165.1319 Section 165.1319 Navigation and Navigable... Thirteenth Coast Guard District § 165.1319 Safety Zone Regulations, Seafair Blue Angels Air Show Performance... Peninsula; thence northerly along the shore of Mercer Island to the point of origin. [Datum: NAD 1983] (c...

Adolescents' Attitudes towards E-cigarette Ingredients, Safety, Addictive Properties, Social Norms, and Regulation

OpenAIRE

Gorukanti, Anuradha; Delucchi, Kevin; Ling, Pamela; Fisher-Travis, Raymond; Halpern-Felsher, Bonnie

2016-01-01

E-cigarette use has dramatically increased. While studies have examined adolescents’ attitudes towards smoking, few have extended this research to adolescents’ attitudes towards e-cigarettes. The goal of this study was to examine adolescents' attitudes regarding e-cigarette ingredients, safety, addictive properties, social norms, accessibility, price, and regulation; and determine whether attitudes differ by past cigarette/e-cigarette use. Participants were 786 9th and 12th graders from Calif...

Review of the regulation and safety assessment of food substances in various countries and jurisdictions

Science.gov (United States)

Magnuson, Bernadene; Munro, Ian; Abbot, Peter; Baldwin, Nigel; Lopez-Garcia, Rebeca; Ly, Karen; McGirr, Larry; Roberts, Ashley; Socolovsky, Susan

2013-01-01

This review compares the regulations, definitions and approval processes for substances intentionally added to or unintentionally present in human food in the following specific countries/jurisdictions: Argentina, Australia, Brazil, Canada, China, the European Union, Japan, Mexico, New Zealand, and the United States. This includes direct food additives, food ingredients, flavouring agents, food enzymes and/or processing aids, food contact materials, novel foods, and nanoscale materials for food applications. The regulatory authority of each target jurisdiction/country uses its own regulatory framework and although the definitions, regulations and approval processes may vary among all target countries, in general there are many similarities. In all cases, the main purpose of each authority is to establish a regulatory framework and maintain/enforce regulations to ensure that food consumed and sold within its respective countries is safe. There is a move towards harmonisation of food regulations, as illustrated by Australia and New Zealand and by Mercosur. The European Union has also established regulations, which are applicable for all member states, to establish a common authorisation procedure for direct food additives, flavourings and enzymes. Although the path for approval of different categories of food additives varies from jurisdiction to jurisdiction, there are many commonalities in terms of the data requirements and considerations for assessment of the safety of use of food additives, including the use of positive lists of approved substances, pre-market approval, and a separation between science and policy decisions. The principles applied are largely reflective of the early work by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) committees and JECFA assessments of the safety of food additives for human and animal foods. PMID:23781843

Cryogenic Safety Rules and Guidelines at CERN

CERN Multimedia

CERN. Geneva

2016-01-01

CERN defines and implements a Safety Policy that sets out the general principles governing safety at CERN. As an intergovernmental organisation, CERN further establishes its own Safety Rules as necessary for its proper functioning. In this process, it takes into account the laws and regulation of the Host States (France and Switzerland), EU regulations and directives, as well as international regulations, standards and directives. For the safety of cryogenic equipment, this is primarily covered by the Safety Regulation for Mechanical Equipment and the General Safety Instruction for Cryogenic Equipment. In addition, CERN has also developed Safety Guidelines to support the implementation of these safety rules, covering cryogenic equipment and oxygen deficiency hazard assessment and mitigation. An overview of the cryogenic safety rules and these safety guidelines will be presented.

United States import safety, environmental health, and food safety regulation in China.

Science.gov (United States)

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

Fit-For-Purpose Land Administration

DEFF Research Database (Denmark)

Enemark, Stig

2015-01-01

The term “Fit-For-Purpose Land Administration” indicates that the approach used for building land administration systems in less developed countries should be flexible and focused on serving the purpose of the systems (such as providing security of tenure and control of land use) rather than...... focusing on top-end technical solutions and high accuracy surveys. Of course, such flexibility allows for land administration systems to be incrementally improved over time. This paper unfolds the Fit-For-Purpose concept by analyzing the three core components: The spatial framework (large scale land parcel...... mapping) should be provided using affordable modern technologies such aerial imageries rather than field surveys. The legal framework must support both legal and social tenure, and the regulations must be designed along administrative rather than judicial lines. The fit-for-purpose approach must...

The Csr System Regulates Escherichia coli Fitness by Controlling Glycogen Accumulation and Energy Levels.

Science.gov (United States)

Morin, Manon; Ropers, Delphine; Cinquemani, Eugenio; Portais, Jean-Charles; Enjalbert, Brice; Cocaign-Bousquet, Muriel

2017-10-31

In the bacterium Escherichia coli , the posttranscriptional regulatory system Csr was postulated to influence the transition from glycolysis to gluconeogenesis. Here, we explored the role of the Csr system in the glucose-acetate transition as a model of the glycolysis-to-gluconeogenesis switch. Mutations in the Csr system influence the reorganization of gene expression after glucose exhaustion and disturb the timing of acetate reconsumption after glucose exhaustion. Analysis of metabolite concentrations during the transition revealed that the Csr system has a major effect on the energy levels of the cells after glucose exhaustion. This influence was demonstrated to result directly from the effect of the Csr system on glycogen accumulation. Mutation in glycogen metabolism was also demonstrated to hinder metabolic adaptation after glucose exhaustion because of insufficient energy. This work explains how the Csr system influences E. coli fitness during the glycolysis-gluconeogenesis switch and demonstrates the role of glycogen in maintenance of the energy charge during metabolic adaptation. IMPORTANCE Glycogen is a polysaccharide and the main storage form of glucose from bacteria such as Escherichia coli to yeasts and mammals. Although its function as a sugar reserve in mammals is well documented, the role of glycogen in bacteria is not as clear. By studying the role of posttranscriptional regulation during metabolic adaptation, for the first time, we demonstrate the role of sugar reserve played by glycogen in E. coli Indeed, glycogen not only makes it possible to maintain sufficient energy during metabolic transitions but is also the key component in the capacity of cells to resume growth. Since the essential posttranscriptional regulatory system Csr is a major regulator of glycogen accumulation, this work also sheds light on the central role of posttranscriptional regulation in metabolic adaptation. Copyright © 2017 Morin et al.

Predicting workers' compensation claims and disciplinary actions using SecureFit®: Further support for integrative models of workplace safety.

Science.gov (United States)

O'Connell, Matthew; Delgado, Kristin; Lawrence, Amie; Kung, Mavis; Tristan, Esteban

2017-06-01

A growing body of applied research has identified certain psychological traits that are predictive of worker safety. However, most of these studies suffer from an overreliance on common method bias caused by self-report measures of both: (a) personal factors such as personality traits; and (b) outcomes such as safety behaviors and injuries. This study utilized archival data from 796 employees at a large U.S. automobile manufacturer. Data were gathered on a pre-employment assessment, SecureFit®, that measured key personality characteristics such as conscientiousness, locus of control, and risk taking. In addition, objective measures of workers' compensation claims and disciplinary actions were also gathered. The results indicated that disciplinary actions and workers' compensation claims were strongly correlated. It also demonstrated that the pre-employment assessment was able to predict both disciplinary actions and workers' compensation claims up to 12months in the future. Screening out just 8% of the applicant sample using the assessment would have resulted in a 35% reduction in disciplinary actions and 46% in workers' compensation claims, respectively. The study found a very strong relationship between counterproductive work behaviors (CWBs), such as not following rules, and workers' compensation claims. It also found a strong relationship between a combination of personality traits that have been shown to be associated with both variables, although the current study was able to demonstrate that relationship with objective measure of both variables. Individuals who receive disciplinary actions for things such as not following rules, not coming to work on time, etc. are significantly more likely to also be involved in serious safety incidents, and vice versa. Identifying those individuals early on in the hiring process and screening them out can significantly reduce the number of CWBs as well as workers' compensation claims. Copyright © 2017 Elsevier Ltd and

International cooperation for the development of consistent and stable transportation regulations to promote and enhance safety and security

International Nuclear Information System (INIS)

Strosnider, J.

2004-01-01

International commerce of radioactive materials crosses national boundaries, linking separate regulatory institutions with a common purpose and making it necessary for these institutions to work together in order to achieve common safety goals in a manner that does not place an undue burden on industry and commerce. Widespread and increasing use of radioactive materials across the world has led to increases in the transport of radioactive materials. The demand for consistency in the oversight of international transport has also increased to prevent unnecessary delays and costs associated with incongruent or redundant regulatory requirements by the various countries through which radioactive material is transported. The International Atomic Energy Agency (IAEA) is the authority for international regulation of transportation of radioactive materials responsible for promulgation of regulations and guidance for the establishment of acceptable methods of transportation for the international community. As such, the IAEA is seen as the focal point for consensus building between its Member States to develop consistency in transportation regulations and reviews and to ensure the safe and secure transport of radioactive material. International cooperation is also needed to ensure stability in our regulatory processes. Changes to transportation regulations should be based on an anticipated safety benefit supported by risk information and insights gained from continuing experience, evaluation, and research studies. If we keep safety as the principle basis for regulatory changes, regulatory stability will be enhanced. Finally, as we endeavour to maintain consistency and stability in our international regulations, we must be mindful of the new security challenges that lay before the international community as a result of a changing terrorist environment. Terrorism is a problem of global concern that also requires international cooperation and support, as we look for ways to

Safety of research reactors - A regulator's perspective

International Nuclear Information System (INIS)

Rahman, M.S.

2001-01-01

Due to historical reasons research reactors have received less regulatory attention in the world than nuclear power plants. This has given rise to several safety issues which, if not addressed immediately, may result in an undesirable situation. However, in Pakistan, research reactors and power reactors have received due attention from the regulatory authority. The Pakistan Research Reactor-1 has been under regulatory surveillance since 1965, the year of its commissioning. The second reactor has also undergone all the safety reviews and checks mandated by the licensing procedures. A brief description of the regulatory framework, the several safety reviews carried out have been briefly described in this paper. Significant activities of the regulatory authority have also been described in verifying the safety of research reactors in Pakistan along with the future activities. The views of the Pakistani regulatory authority on the specific issues identified by the IAEA have been presented along with specific recommendations to the IAEA. We are of the opinion that there are more Member States operating nuclear research reactors than nuclear power plants. Therefore, there should be more emphasis on the research reactor safety, which somehow has not been the case. In several recommendations made to the IAEA on the specific safety issues the emphasis has been, in general, to have a similar documentation and approach for maintaining and verifying operational safety at research reactors as is currently available for nuclear power reactors and may be planned for nuclear fuel cycle facilities. (author)

Safety culture

International Nuclear Information System (INIS)

Keen, L.J.

2003-01-01

Safety culture has become a topic of increasing interest for industry and regulators as issues are raised on safety problems around the world. The keys to safety culture are organizational effectiveness, effective communications, organizational learning, and a culture that encourages the identification and resolution of safety issues. The necessity of a strong safety culture places an onus on all of us to continually question whether the safety measures already in place are sufficient, and are being applied. (author)

Classification and methodical features of fitness and wellness facilities

Directory of Open Access Journals (Sweden)

Yu. I. Beliak

2014-11-01

Full Text Available Purpose : health and fitness use a large arsenal of different sports and physical activity. Development of fitness industry promotes its expansion and requires classification and methodological features that lead to the use of appropriate fitness programs. Material : more than 60 literature and video of 42 prestigious international fitness - conventions lessons were analyzed. Results : the evolution of species fitness and wellness, as well as the character used in those funds. Conclusions : as a means of improving classification attribute fitness appropriate to use their orientation, according to which they are divided into aerobic, strength exercises that promote flexibility and psychomotor coordination. The main methodological features fitness facilities are highlighted: the variety and interchangeability, clear regulation, the ability to transform, to exercise a selective effect on the body, the ability to solve a wide range of tasks, innovation.

78 FR 42012 - Safety Zone and Regulated Navigation Area; Chicago Sanitary and Ship Canal, Romeoville, IL

Science.gov (United States)

2013-07-15

... is issuing this Interim Rule to address two omissions from the regulatory text of the Safety zone and... boats, etc.). This revision is intended to make the regulatory text consistent with the discussion of... of Homeland Security IR Interim Rule NPRM Notice of Proposed Rulemaking RNA Regulated Navigation Area...

CERN's new safety policy

CERN Multimedia

2014-01-01

The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

Safety first. Status reports on the IAEA's safety standards

International Nuclear Information System (INIS)

Webb, G.; Karbassioun, A.; Linsley, G.; Rawl, R.

1998-01-01

Documents in the IAEA's Safety Standards Series known as RASS (Radiation Safety Standards) are produced to develop an internally consistent set of regulatory-style publications that reflects an international consensus on the principles of radiation protection and safety and their application through regulation. In this article are briefly presented the Agency's programmes on Nuclear Safety Standards (NUSS), Radioactive Waste Safety Standards (RADWASS), and Safe Transport of Radioactive Materials

Presenting information on regulation values improves the public’s sense of safety: Perceived mercury risk in fish and shellfish and its effects on consumption intention

Science.gov (United States)

Suzuki, Mai; Yamaguchi, Tomiko

2017-01-01

Risk communication aims to promote health and understanding through information exchange; however, explanations regarding the basis of regulation values for the public are insufficient. Moreover, it is unclear how information presentation affects the public’s sense of safety and their consumption intentions. We first investigated the relationship between perception of mercury-risk in fish and shellfish and individual attributes and knowledge. We then examined how presenting information on regulation values and primary factors regarding perception affected sense of safety toward regulations and food-consumption intentions. An online survey was conducted with Japanese individuals (N = 1148). Respondents were randomly assigned to one of three groups based on the presentation level of regulation values. People who frequently consumed tuna had a high perception of dread risk of mercury. This suggests that the dread risk perception of mercury does not determine tuna-type consumption behavior; rather, individuals’ consumption behavior determines dread risk perception of mercury. Among those with high tuna-type consumption, those receiving information that a safety factor of 10 times had been considered showed a significantly greater sense of safety than did the group that was not presented with information on regulation values (odds ratio (95% confidence interval): 2.04 (1.18–3.53), p values showed a weak but significantly positive correlation with excessive intake of tuna-type fish (odds ratio: 2.95 (0.93–9.32), p values increases sense of safety; however, it may also lead to excessive intake. PMID:29267301

Implementation of the chemicals regulation REACH : Exploring the impact on occupational health and safety management among Swedish downstream users

OpenAIRE

Schenk, Linda; Antonsson, Ann-Beth

2015-01-01

In the present study we have examined how the European chemicals regulation Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) has influenced occupational risk management of chemicals at Swedish downstream user companies. The data were collected through interviews with occupational health and safety professionals, safety representatives and authority employees. The results show that most of the informants had scarce knowledge about REACH and that REACH implementation...

Safety: Preventive Medicine.

Science.gov (United States)

Kotula, John R.; Digenakis, Anthony

1985-01-01

Underscores the need for community colleges to practice safety within the institutions and to instruct students in workplace safety procedures and requirements. Reviews Occupational Safety and Health Act (OSHA) regulations and their impact on industry and education. Looks at the legal responsibilities of colleges for safety. (DMM)

A study of influences of the workers' compensation and injury management regulations on aviation safety at a workplace.

Science.gov (United States)

Yadav, Devinder K; Nikraz, Hamid; Chen, Yongqing

2016-01-01

As the aviation industries developed, so too did the recognition that there must be an effective regulatory framework to address issues related to the workers' compensation and rehabilitation. All employees would like to work and return home safely from their workplace. Therefore, the efficient management of workplace injury and disease reduces the cost of aviation operations and improves flight safety. Workers' compensation and injury management laws regulate a majority of rehabilitation and compensation issues, but achieving an injury-free workplace remains a major challenge for the regulators. This paper examines the clauses of the workers' compensation and injury management laws of Western Australia related to workplace safety, compensation, and rehabilitations of the injured workers. It also discusses various provisions of common law under the relevant workers' health injury management legislations.

Safety Learning, Organizational Contradictions and the Dynamics of Safety Practice

Science.gov (United States)

Ripamonti, Silvio Carlo; Scaratti, Giuseppe

2015-01-01

Purpose: The purpose of this paper is to explore the enactment of safety routines in a transshipment port. Research on work safety and reliability has largely neglected the role of the workers' knowledge in practice in the enactment of organisational safety. The workers' lack of compliance with safety regulations represents an enduring problem…

The most prominent safety guarantees

International Nuclear Information System (INIS)

Lucenet, G.

1978-01-01

The Creys-Malville Nuclear Centre has been designed using the safety analysis implemented since the beginning of the developments of breeder reactors in France and the Super Phenix follows almost the same safety regulations as its predecessor the Phenix reactor. These regulations are based on: 'Recommendations for the safety standards of the Super Phenix' drawn up by the French Safety Authorities in July 1973. The prominent points are summarised. (C.F.)

Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material (2012 Ed.). Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-06-15

This Safety Guide provides recommendations and guidance on achieving and demonstrating compliance with IAEA Safety Standards Series No. SSR-6, Regulations for the Safe Transport of Radioactive Material (2012 Edition), which establishes the requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material, including the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Standards Series No. TS-G-1.1 Rev. 1, which was issued in 2008.

White paper on nuclear safety in 2005

International Nuclear Information System (INIS)

2006-04-01

The white paper consists of four parts. The first part described the outline of international discussions on safety culture and activities promoted by utilities and regulatory bodies in Japan. The second part explained the main activities of the Nuclear Safety Commission of Japan and nuclear regulatory authorities on nuclear safety regulation. The third part introduced various activities for ensuring overall nuclear safety in Japan, such as safety regulation systems for nuclear facilities, disaster measures at nuclear facilities, progress in nuclear research, nuclear safety regulation by risk-informed utilization, environmental radiation surveys, international cooperation on nuclear safety. The forth part contained various materials and data related to the Nuclear Safety Commission of Japan. (J.P.N.)

Utility regulation-The scope and structure of electrical safety regulation

International Nuclear Information System (INIS)

Abbott, Malcolm; Cohen, Bruce

2011-01-01

As a consequence of policies in Australia and New Zealand to increase competition in the utilities sector, regulatory agencies have been created in each state to provide independent and authorative advice on matters such as electricity pricing, access to infrastructure, service quality and security of supply. In addition arrangements have been established to maintain safety standards in the industry. The purpose of this paper is to discuss the major issues that have arisen in the creation of regulatory agencies responsible for electrical safety standards in Australia and New Zealand, and how they have impacted on liberalised electricity markets. - Highlights: → Policies in Australia and New Zealand to increase competition have led to the creation of electrical safety agencies. → These agencies have been created in response to perceived market failures. → There is a variance in agencies in terms of their independence and industry coverage. → These agencies have been created at a time of falling fatalities.

Regulator and industry Co-operation on safety research: challenges and opportunities. Final report and answers to questionnaire

International Nuclear Information System (INIS)

2003-02-01

A Group has been set up by the CSNI to identify and review the issues which hinder closer co-operation on research between regulators and industry, and to propose possible ways for resolving such issues while maintaining regulatory independence in decision-making. The Group has analyzed the potential advantages and disadvantages of regulator-industry collaboration in safety research and has also provided indications on how to overcome possible difficulties that can arise from such collaboration. The Group focused in particular on the issue of regulator independence, on means to preserve it and ways to demonstrate it to the public while undertaking collaboration with industry

Transports of radioactive materials. Legal regulations, safety and security concepts, experience; Befoerderung radioaktiver Stoffe. Rechtsvorschriften, Sicherheits- und Sicherungskonzept, Erfahrungen

Energy Technology Data Exchange (ETDEWEB)

Schwarz, Guenther

2012-07-15

In Germany, approximately 650,000 to 750,000 units containing radioactive materials for scientific, medical and technical applications are shipped annually by surface, air and water transports. Legally speaking, radioactive materials are dangerous goods which can cause hazards to life, health, property and the environment as a result of faulty handling or accidents in transit. For protection against these hazards, their shipment therefore is regulated in extensive national and international rules of protection and safety. The article contains a topical review of the international and national transport regulations and codes pertaining to shipments of radioactive materials, and of the protection concepts underlying these codes so as to ensure an adequate standard of safety and security in shipping radioactive materials in national and international goods traffic. (orig.)

Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

Science.gov (United States)

Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

2018-03-22

Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

Pediatric anthropometrics are inconsistent with current guidelines for assessing rider fit on all-terrain vehicles.

Science.gov (United States)

Bernard, Andrew C; Mullineaux, David R; Auxier, James T; Forman, Jennifer L; Shapiro, Robert; Pienkowski, David

2010-07-01

This study sought to establish objective anthropometric measures of fit or misfit for young riders on adult and youth-sized all-terrain vehicles and use these metrics to test the unproved historical reasoning that age alone is a sufficient measure of rider-ATV fit. Male children (6-11 years, n=8; and 12-15 years, n=11) were selected by convenience sampling. Rider-ATV fit was quantified by five measures adapted from published recommendations: (1) standing-seat clearance, (2) hand size, (3) foot vs. foot-brake position, (4) elbow angle, and (5) handlebar-to-knee distance. Youths aged 12-15 years fit the adult-sized ATV better than the ATV Safety Institute recommended age-appropriate youth model (63% of subjects fit all 5 measures on adult-sized ATV vs. 20% on youth-sized ATV). Youths aged 6-11 years fit poorly on ATVs of both sizes (0% fit all 5 parameters on the adult-sized ATV vs 12% on the youth-sized ATV). The ATV Safety Institute recommends rider-ATV fit according to age and engine displacement, but no objective data linking age or anthropometrics with ATV engine or frame size has been previously published. Age alone is a poor predictor of rider-ATV fit; the five metrics used offer an improvement compared to current recommendations. Copyright 2010 Elsevier Ltd. All rights reserved.

High temperature reactor safety and environment

International Nuclear Information System (INIS)

Brisbois, J.; Charles, J.

1975-01-01

High-temperature reactors are endowed with favorable safety and environmental factors resulting from inherent design, main-component safety margins, and conventional safety systems. The combination of such characteristics, along with high yields, prove in addition, that such reactors are plagued with few problems, can be installed near users, and broaden the recourse to specific power, therefore fitting well within a natural environment [fr

Political economy and social psychology of nuclear safety

International Nuclear Information System (INIS)

Choe, Gwang Sik

2009-03-01

The contents of this book are consideration on independence of nuclear safety regulations, analysis of trend in internal and external on effectualness of nuclear safety regulations, political psychology of a hard whistle, how to deal with trust and distrust on regulation institute, international trend and domestic trend of nuclear safe culture, policy for building of trust of people on nuclear safety and regulations, measurement and conception of nuclear safety and for who imposes legal controls?

Political economy and social psychology of nuclear safety

Energy Technology Data Exchange (ETDEWEB)

Choe, Gwang Sik

2009-03-15

The contents of this book are consideration on independence of nuclear safety regulations, analysis of trend in internal and external on effectualness of nuclear safety regulations, political psychology of a hard whistle, how to deal with trust and distrust on regulation institute, international trend and domestic trend of nuclear safe culture, policy for building of trust of people on nuclear safety and regulations, measurement and conception of nuclear safety and for who imposes legal controls?.

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Collaborative, cross-national studies on health and safety in seafaring for evidence-based Maritime policy and regulations.

Science.gov (United States)

Jensen, Olaf C

2009-01-01

Until recently, maritime health and safety policies and regulations were sparsely based on health and safety research, and only a small number of countries contributed to new research. To strengthen maritime health and safety research activities by presenting a study example and discussing the possibilities and needs for more national and cross-national research. In a cross-national epidemiological study example, the seafarers from eleven countries completed small, anonymous questionnaires concerning the working conditions on their latest tours at sea while waiting for their health examinations. Significant disparities were pointed out among the nationalities, e.g., the length of the tours at sea, the proportional distribution of officers and non-officers, the mean age structure, the injury incidence rates, and the differences of occupational safety standards. The analysis of all data together increased the statistical strength of the multivariate analyses and allowed for valid comparisons among the nationalities. The questionnaire data was used successfully in the collaborative study example, but other data sources and methods are useful for health and safety research in seafaring as well. More national and cross-national research on maritime health and safety is warranted.

A survey of costs incurred in U.K. X-ray diffraction research laboratories as a consequence of proposed regulations for radiological safety

International Nuclear Information System (INIS)

Blow, D.M.

1981-01-01

A small survey of British X-ray diffraction laboratories was undertaken, with the aim of discovering the effects of the Health and Safety at Work Act (1974) and the draft regulations on radiological protection and ionising radiations (1978) on the practice of X-ray crystallography. The responses lead to the conclusion that the average cost incurred in bringing X-ray diffraction equipment to a safety standard compatible with the draft regulations (as judged by the respondents) will exceed Pound2,000 per X-ray generator. The safety costs will represent an overhead charge of at least 15-18% on the purchase of an X-ray generator, requiring additional capital outlay of over Pound5m to maintain the current level of X-ray diffraction activity in the U.K. There seems to be no evidence of a high accident rate with diffraction equipment, and the cost of the safety precautions bears no relation to the risks involved. (author)

78 FR 20277 - Safety Zones & Special Local Regulations; Recurring Marine Events in Captain of the Port Long...

Science.gov (United States)

2013-04-04

.... Regulatory History and Information The Coast Guard promulgated safety zones and special local regulations for... first week of July. Location: Waters of the Connetquot River off Snapper Inn Restaurant, Oakdale, NY in...: Waters of Patchogue Bay off ``Lombardi's On the Bay'' restaurant, Patchogue, NY in approximate position...

33 CFR 165.1318 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Portland, OR Captain of...

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security and Safety Zone Regulations, Large Passenger Vessel Protection, Portland, OR Captain of the Port Zone 165.1318 Section 165.1318 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND...

Some Thoughts on Regulating Food Safety in China

Institute of Scientific and Technical Information of China (English)

Wang Lei

2006-01-01

The article analyses the current situation of food safety supervision in China, summarizes the deep reason behind the food safety and puts forward some suggestions to strengthen the supervision by using foreign references and advance operations from the legislation, the food safety supervision system and other aspects.

Discussion on the safety classification of nuclear safety mechanical equipment

International Nuclear Information System (INIS)

Shen Wei

2010-01-01

The purpose and definition of the equipment safety classification in nuclear plant are introduced. The differences of several safety classification criterions are compared, and the object of safety classification is determined. According to the regulation, the definition and category of the safety functions are represented. The safety classification method, safety classification process, safety class interface, and the requirement for the safety class mechanical equipment are explored. At last, the relation of the safety classification between the mechanical and electrical equipment is presented, and the relation of the safety classification between mechanical equipment and system is also presented. (author)

Discussion on building safety culture inside a nuclear safety regulatory body

International Nuclear Information System (INIS)

Fan Yumao

2013-01-01

A strong internal safety culture plays a key role in improving the performance of a nuclear regulatory body. This paper discusses the definition of internal safety culture of nuclear regulatory bodies, and explains the functions that the safety culture to facilitate the nuclear safety regulation and finally puts forward some thoughts about building internal safety culture inside regulatory bodies. (author)

Effect of test exercises and mask donning on measured respirator fit.

Science.gov (United States)

Crutchfield, C D; Fairbank, E O; Greenstein, S L

1999-12-01

Quantitative respirator fit test protocols are typically defined by a series of fit test exercises. A rationale for the protocols that have been developed is generally not available. There also is little information available that describes the effect or effectiveness of the fit test exercises currently specified in respiratory protection standards. This study was designed to assess the relative impact of fit test exercises and mask donning on respirator fit as measured by a controlled negative pressure and an ambient aerosol fit test system. Multiple donnings of two different sizes of identical respirator models by each of 14 test subjects showed that donning affects respirator fit to a greater degree than fit test exercises. Currently specified fit test protocols emphasize test exercises, and the determination of fit is based on a single mask donning. A rationale for a modified fit test protocol based on fewer, more targeted test exercises and multiple mask donnings is presented. The modified protocol identified inadequately fitting respirators as effectively as the currently specified Occupational Safety and Health Administration (OSHA) quantitative fit test protocol. The controlled negative pressure system measured significantly (p < 0.0001) more respirator leakage than the ambient aerosol fit test system. The bend over fit test exercise was found to be predictive of poor respirator fit by both fit test systems. For the better fitting respirators, only the talking exercise generated aerosol fit factors that were significantly lower (p < 0.0001) than corresponding donning fit factors.

The nuclear safety regulation in Japan and the response to changes of circumstances surrounding the nuclear electricity generation

International Nuclear Information System (INIS)

Hombu, K.; Hirota, M.; Taniguchi, T.; Tanaka, N.; Akimoto, S.

2001-01-01

The influences of external factors on nuclear safety are discussed in this paper, based on the views on the circumstances of nuclear electricity generation. The following external factors, which might have some potential impacts on nuclear safety, are selected for discussion: (1) The deregulation in the electricity generation industry; (2) The modification of approval/certification system in the regulation of electricity generation; (3) The influences on social atmosphere due to the occurrence of a series of troubles; (4) The government reform and the structural adjustment of industry and (5) Others. Our further discussion seems to focus on the following 2 issues: (a) Whether nuclear power and the other electrical sources should compete with each other for short term economical cost, or whether factors of cost stability and competitiveness as well as longer term energy supply security and global environmental issues ranging over several decades should be considered; (b) How to realize the appropriate regulation from the perspective of public acceptance and confidence (when a series of troubles occur) without imposing unnecessary burdens on industry and without jeopardizing safety. These issues may be common among many countries and can be widely discussed. (author)

29 CFR 1926.105 - Safety nets.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety nets. 1926.105 Section 1926.105 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Personal Protective and Life Saving Equipment § 1926.105...

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

International Nuclear Information System (INIS)

2010-01-01

It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national policies and in revisions

Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

Energy Technology Data Exchange (ETDEWEB)

2010-07-01

It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national

Radiation safety

International Nuclear Information System (INIS)

Van Riessen, A.

2002-01-01

Full text: Experience has shown that modem, fully enclosed, XRF and XRD units are generally safe. This experience may lead to complacency and ultimately a lowering of standards which may lead to accidents. Maintaining awareness of radiation safety issues is thus an important role for all radiation safety officers. With the ongoing progress in technology, a greater number of radiation workers are more likely to use a range of instruments/techniques - eg portable XRF, neutron beam analysis, and synchrotron radiation analysis. The source for each of these types of analyses is different and necessitates an understanding of the associated dangers as well as use of specific radiation badges. The trend of 'suitcase science' is resulting in scientists receiving doses from a range of instruments and facilities with no coordinated approach to obtain an integrated dose reading for an individual. This aspect of radiation safety needs urgent attention. Within Australia a divide is springing up between those who work on Commonwealth property and those who work on State property. For example a university staff member may operate irradiating equipment on a University campus and then go to a CSIRO laboratory to operate similar equipment. While at the University State regulations apply and while at CSIRO Commonwealth regulations apply. Does this individual require two badges? Is there a need to obtain two licences? The application of two sets of regulations causes unnecessary confusion and increases the workload of radiation safety officers. Radiation safety officers need to introduce risk management strategies to ensure that both existing and new procedures result in risk minimisation. A component of this strategy includes ongoing education and revising of regulations. AXAA may choose to contribute to both of these activities as a service to its members as well as raising the level of radiation safety for all radiation workers. Copyright (2002) Australian X-ray Analytical

Decision of the Council of State on the general regulations for the safety of a disposal facility for reactor waste (398/91)

International Nuclear Information System (INIS)

1991-01-01

These Regulations contain provisions for the safe planning, construction and use of final radioactive waste storage facilities. Licensees with a waste management obligation are responsible for ensuring the safety of such facilities. The Regulations entered into force on 1 March 1991. (NEA)

Risk-informed regulation

International Nuclear Information System (INIS)

Hoffman, D.R.

2003-01-01

In assessing safety for nuclear facilities, regulators have traditionally used a deterministic approach. New techniques for assessing nuclear or radiological risks make it possible for regulators to incorporate risk insights into their regulations. By 'risk-informing' the regulatory processes, independent bodies tasked with protecting the health and safety of the public can focus on those design and operational issues most important to safety. Such an approach is a move away from prescriptive regulations that were based on conservative engineering judgments toward regulations focused on issues that contribute significantly to safety. Despite the availability of probabilistic risk assessment (PRA) tools, organisations often struggle with how to best use this capability. Most international regulations are still based largely on deterministic analyses that were developed without the benefit of quantitative or measurable estimates of risk. PRA considers issues of risk in a more comprehensive manner by examining a wider spectrum of initiating events and their frequency, and considers the likelihood of events in a rigorous and comprehensive manner. In some countries, nuclear regulators are actively moving toward increasing the use of risk insights in a variety of strategic arenas, including risk-informed technical specifications (operating limits and conditions), in-service inspection and testing, programs, and assessment and enforcement actions. A risk-informed approach enhances the traditional deterministic approach by explicitly considering a broader range of safety challenges, focusing resources on the basis of risk significance, considering a broader range of counter measures to mitigate challenges, and explicitly identifying and quantifying uncertainties in analyses. (author)

More safety by improving the safety culture

International Nuclear Information System (INIS)

Laaksonen, J.

1993-01-01

In its meeting in 1986, after Chernobyl accident, the INSAG group concluded, that the most important reason for the accident was lack of safety culture. Later the group realized that the safety culture, if it is well enough, can be used as a powerful tool to assess and develop practices affecting safety in any country. A comprehensive view on the various aspects of safety culture was presented in the INSAG-4 report published in 1991. Finland was among the first nations include the concept of safety culture in its regulations. This article describes the roles of government and the regulatory body in creating a national safety culture. How safety culture is seen in the operation of a nuclear power plant is also discussed. (orig.)

Legal issues of the environmental safety regulation in the sphere of nanotechnology in Russian Federation

International Nuclear Information System (INIS)

Belokrylova, Ekaterina A

2013-01-01

Nowadays one of the principal innovative spheres in Russia is considered to be a rapid development of nanotechnology and nanomaterials and implementation its products into almost all fields of social and industrial life. Nevertheless, despite the pointed advantages an appearance of nano products has set not only a positive example of the scientific progress development and dynamics, but also a potential threat of possible risks for the environment and people's health in the case of its massive use when there is a lack of research about its impacts. In Russian Federation the problem of nanosafety regulation is extremely actual. A number of international documents have noted a lack of legal regulation in the sphere of nanotechnologies in Russian Federation. Thus, according to the strategic EU program, it's mentioned that in 2009 on an annual meeting of OECD Tour de Table Meeting in Paris (November, 2007) Russia took responsibility to develop a long term program of nanoindustry development by 2015 (Nanotechnology Action Plan for Russia-2015). The key role should be dedicated to the nanosafety aspects and potential risk assessment of nanomaterials for environment and humans' health. Unfortunately, until now Russia did not provide this document for discussion at the international level by the partners of nanoconsortcium. Indeed, from 2007 until nowadays in Russian Federation there are no a single federal act of legislation (federal'nyi zakon), establishing the state foundations of regulation of nanosafety. The only one Federeal Legal Act in the described sphere is the Federalniy Zakon from 19 July 2007 A bout the Russian corporation of nanotechnologies , which has established the principles of organization, activites, functions and termination of Rosnanotech. However, there are no articles dedicated to the environmental safety provision in regards of nano products applications. Also there is no complex federal act consolidating legal status of action in the field of

Legal issues of the environmental safety regulation in the sphere of nanotechnology in Russian Federation

Science.gov (United States)

Belokrylova, Ekaterina A.

2013-04-01

Nowadays one of the principal innovative spheres in Russia is considered to be a rapid development of nanotechnology and nanomaterials and implementation its products into almost all fields of social and industrial life. Nevertheless, despite the pointed advantages an appearance of nano products has set not only a positive example of the scientific progress development and dynamics, but also a potential threat of possible risks for the environment and people's health in the case of its massive use when there is a lack of research about its impacts. In Russian Federation the problem of nanosafety regulation is extremely actual. A number of international documents have noted a lack of legal regulation in the sphere of nanotechnologies in Russian Federation. Thus, according to the strategic EU program, it's mentioned that in 2009 on an annual meeting of OECD Tour de Table Meeting in Paris (November, 2007) Russia took responsibility to develop a long term program of nanoindustry development by 2015 (Nanotechnology Action Plan for Russia-2015). The key role should be dedicated to the nanosafety aspects and potential risk assessment of nanomaterials for environment and humans' health. Unfortunately, until now Russia did not provide this document for discussion at the international level by the partners of nanoconsortcium. Indeed, from 2007 until nowadays in Russian Federation there are no a single federal act of legislation (federal'nyi zakon), establishing the state foundations of regulation of nanosafety. The only one Federeal Legal Act in the described sphere is the Federalniy Zakon from 19 July 2007 "About the Russian corporation of nanotechnologies", which has established the principles of organization, activites, functions and termination of Rosnanotech. However, there are no articles dedicated to the environmental safety provision in regards of nano products applications. Also there is no complex federal act consolidating legal status of action in the field of

Current Approaches of Regulating Radiological Safety of Medical and Industrial Practices in Romania

International Nuclear Information System (INIS)

Goicea, C.

2016-01-01

The principal document regulating the radiological safety of ionizing radiation application in Romania is the “Fundamental Norms for Radiological Safety”. These norms establish the requirements concerning the assurance of radiological safety of occupational exposed workers, population and environment, in accordance with the provisions of Law 111/1996 on the safe deployment of nuclear activities, republished. Justification of practices for all new practices which lead to exposure to ionizing radiation shall be justified in writing by their initiator, underlining their economic, social or other nature advantages, in comparison with the detriment which they could cause to health. CNCAN authorise these practices, provided that they consider the justification as being thorough. The applicant, respectively the authorisation holder, has to demonstrate that all actions to ensure radiation protection optimization are undertaken, with a view to ensure that all exposures, including the potential ones, within the framework of practice developed are maintained at the lowest reasonable achievable level, taking into account the economic and social factors: ALARA principle.

Development of safety performance indicators in Japan

International Nuclear Information System (INIS)

Ohashi, H.; Tamao, S.; Tanaka, J.; Sawayama, T.

2001-01-01

For the purpose of safety regulations of operating nuclear power stations in Japan, the regulatory authorities utilize two types of regulations. One is the direct regulation, such as periodical inspection to inspect the function and performance of equipment important to safety, and the other is the audit type regulation such as preservation inspection to audit the compliance with the safety preservation rules. As performance indicators are expected to be an effective tool to evaluate the activities by audit type regulations, NUPEC is studying a comprehensive set of operational performance indicators to meet the effective evaluation method for the safety preservation activities in the audit type regulations under the frame of current safety regulation system. The study includes the establishment of comprehensive operational performance indicators applicable in Japan, the effective application of performance indicators to the current Japanese regulation, the clarification of the applicable scope of utilization, the possibility of applying the performance indicators. This report describes the present status of our performance indicator studies. After the completion of these studies the regulatory authorities will evaluate if and how the new set of comprehensive performance indicators could be introduced to Japanese regulatory scheme. (author)

Global Nuclear Safety and Security Network

International Nuclear Information System (INIS)

Guo Lingquan

2013-01-01

The objectives of the Regulatory Network are: - to contribute to the effectiveness of nuclear regulatory systems; - to contribute to continuous enhancements, and - to achieve and promote radiation and nuclear safety and security by: • Enhancing the effectiveness and efficiency of international cooperation in the regulation of nuclear and radiation safety of facilities and activities; • Enabling adequate access by regulators to relevant safety and security information; • Promoting dissemination of information on safety and security issues as well as information of good practices for addressing and resolving these issues; • Enabling synergies among different web based networks with a view to strengthening and enhancing the global nuclear safety framework and serving the specific needs of regulators and international organizations; • Providing additional information to the public on international regulatory cooperation in safety and security matters

Overview of nuclear safety regulations in countries of Easter Europe and the former Soviet Union. Working material

International Nuclear Information System (INIS)

1996-10-01

The document contains a compilation of information on Nuclear Safety Regulations in countries of Eastern Europe and the Former Soviet Union provided by the representatives of Armenia, Bulgaria, Czech Republic, Hungary, Slovakia and Ukraine in the Steering Committee of the Extrabudgetary Programme on the Safety of WWER Nuclear Power Plants (the Steering Committee provides co-ordination and guidance to the IAEA on technical matters and serves as a forum for exchange of information with the European Commission and with other international and financial organizations). A separate abstract was prepared for each of the seven individual papers

Organisational culture at the Radiation and Nuclear Safety Authority of Finland's Nuclear Reactor Regulation department

International Nuclear Information System (INIS)

Reiman, T.

2001-01-01

A case study to investigate the organisational culture of the regulatory authority was conducted at the Radiation and Nuclear Safety Authority of Finland's (STUK) Nuclear Reactor Regulation (YTO) department. Organisational culture is defined as a pattern of shared basic assumptions, which are basically unconscious. Objectives of the study were to conceptualise and describe the main characteristics of YTO's organisational culture and to carry out a tentative core task analysis of the inspectors' work. A combination of quantitative and qualitative methods was used in the research. In the first phase of the research, an organisational culture survey (FOCUS) was administered. It is base on a theory according to which organisations can be categorised into four main culture types, support-, innovation, goal- and rule-culture. It was tailored to better fit this kind of organisation on the basis of document analysis and preliminary interviews. Data was factor analysed and summated scales were formed. YTO's culture was identified as a hierarchy-focused (rule) culture with less emphasis on innovation, support or goals. However, the ideal values of the personnel emphasised also social support and goal setting. Ambiguous goals were felt by some personnel as increased uncertainty about the meaningfulness of one's job. Also a lack of feedback was mentioned as a weakness in YTO's culture. In the second phase of the research, a development workshop was carried out. The themes of the workshop were identified on the basis of the results of the first phase. Main targets for development that were identified in the workshop were human resources, goal setting and knowledge management. The ideal values of the personnel emphasised support and goal cultures. (orig.)

Experience with the 1985 UK ionizing radiation regulations: the regulators' viewpoint

International Nuclear Information System (INIS)

Bines, W.P.; Beaver, P.F.

1991-01-01

The Ionising Radiations Regulations 1985 achieved UK implementation of the Euratom Basic Safety Standards Directive; interim action has taken account of recent revisions of risk estimates and the regulations will not be revised in advance of renegotiation of the Euratom Directive. Wide ranging consultation, central to the development of health and safety legislation in the UK, leads to greater co-operation between regulators and regulated and more acceptable legislation. Examples of co-operation, also of methods of enforcement and the use made of them, are given. The authors conclude that the regulations have stood the test of experience well. (Author)

Realism in nuclear criticality safety

International Nuclear Information System (INIS)

McLaughlin, T. P.

2009-01-01

Commercial nuclear power plant operation and regulation have made remarkable progress since the Three Mile Island Accident. This is attributed largely to a heavy dose of introspection and self-regulation by the industry and to a significant infusion of risk-informed and performance-based regulation by the Nuclear Regulatory Commission. This truly represents reality in action both by the plant operators and the regulators. On the other hand, the implementation of nuclear criticality safety in ex-reactor operations involving significant quantities of fissile material has not progressed, but, tragically, it has regressed. Not only is the practice of the discipline in excess of a factor of ten more expensive than decades ago; the trend continues. This unfortunate reality is attributed to a lack of coordination within the industry (as contrasted to what occurred in the reactor operations sector), and to a lack of implementation of risk-informed and performance-based regulation by the NRC While the criticality safety discipline is orders of magnitude smaller than the reactor safety discipline, both operators and regulators must learn from the progress made in reactor safety and apply it to the former to reduce the waste, inefficiency and potentially increased accident risks associated with current practices. Only when these changes are made will there be progress made toward putting realism back into nuclear criticality safety. (authors)

Safety Education and Science.

Science.gov (United States)

Ralph, Richard

1980-01-01

Safety education in the science classroom is discussed, including the beginning of safe management, attitudes toward safety education, laboratory assistants, chemical and health regulation, safety aids, and a case study of a high school science laboratory. Suggestions for safety codes for science teachers, student behavior, and laboratory…

Food safety measurement issues. Way forward

International Nuclear Information System (INIS)

Venkatesh Iyengar

2013-01-01

Ensuring food safety (FS) is a persistent concern frequently faced by many countries. Safeguarding the quality of food that is fit for human consumption is the primary responsibility of the governmental regulatory agencies. For most part, agro-industries and food processors assume voluntary leadership for producing safe food. However, in the event of FS breach, the regulatory responsibility kicks into identify and rectify the situation. Notwithstanding whether it is the regulator or the industry that institutes the remedial action (e.g. improved hygiene and refined agricultural and manufacturing practices), the role of laboratory measurements is central in safeguarding the integrity of a functioning FS system. There are many analytical tools available to implement this task, such as validated analytical methods, natural matrix reference materials, field tested monitoring systems (proactive assessment) and effective surveillance systems (constant vigilance to prevent repeat safety violations). Way forward: existing FS tools are insufficient and should be strengthened with innovative approaches. Examples are: assembling swift intervention logistics to face FS breaches; rapid response systems including communication; robust metrology based measurement systems located at strategic locations in the country; and inter-disciplinary human resource to match the need for capacity development. These issues are discussed. (author)

A study on the feasibility and a possible form of local residents participation in nuclear safety regulation

International Nuclear Information System (INIS)

Lee, Sang Hoon; Son, Moon Kyu; Kim, Seong Sook

2003-02-01

It is expected that the results of this study will help policy makers in the government and nuclear industry enhance the confidence of local residents and citizens in the safety of nuclear energy. It is also believed that the citizen confidence on the nuclear energy will help them implement nuclear policies more efficiently and more safely. Considering that the newly sworn-in government is to involve citizens in wide variety of policy areas, this study fits with the policy directions of the new government. Most importantly, desirable citizen participation in public decision-making is to contribute to the enhancement of the working democracy

A study on the feasibility and a possible form of local residents participation in nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Hoon; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Kim, Seong Sook [Shila Univ., Busan (Korea, Republic of)

2003-02-15

It is expected that the results of this study will help policy makers in the government and nuclear industry enhance the confidence of local residents and citizens in the safety of nuclear energy. It is also believed that the citizen confidence on the nuclear energy will help them implement nuclear policies more efficiently and more safely. Considering that the newly sworn-in government is to involve citizens in wide variety of policy areas, this study fits with the policy directions of the new government. Most importantly, desirable citizen participation in public decision-making is to contribute to the enhancement of the working democracy.

Regulatory regime and its influence in the nuclear safety

International Nuclear Information System (INIS)

Laaksonen, J.

1999-01-01

Main elements of nuclear regulatory regime in general is presented. These elements are: national rules and safety regulations, system of nuclear facility licensing, activities of regulatory body. Regulatory body is needed to specify the national safety regulations, review and assess the safety documentation presented to support license application, make inspections to verify fulfilment of safety regulations and license conditions, monitor the quality of work processes of user organization, and to assess whether these processes provide a high safety level, promote high safety culture, promote maintenance and development of national infrastructure relevant to nuclear safety, etc

Fitness

Science.gov (United States)

... gov home http://www.girlshealth.gov/ Home Fitness Fitness Want to look and feel your best? Physical ... are? Check out this info: What is physical fitness? top Physical fitness means you can do everyday ...

Challenges in safety regulation of R and D activities for advanced technologies in DAE units

International Nuclear Information System (INIS)

Shukla, Dinesh Kumar

2016-01-01

DAE is engaged in intensive research and developmental activities, especially for advanced technologies such as accelerators, lasers, supercomputers, advanced materials and instrumentation. The starting point of an R and D project might be a hypothesis to be tested, problem to be solved, or the performance of an item to be improved, and there may be many possible solutions and technologies that could be used. R and D is quite different from designing, constructing, operating a plant. In these, precisely described result can be defined from the beginning and can be described in design specifications, process descriptions and procedures. However, while established procedures may be available to begin an R and D project, deviation from these procedures may occur often as a legitimate component of the conduct of R and D. Nevertheless, the R and D activities have to be performed in a manner which provides assurance that safety requirements are adequately addressed. Hence, the regulatory approach for enforcing the safety regulation in such facilities is also not as rigid as those for an operating industry. This paper is aimed to discuss some of the key challenges in regulating such R and D activities and also attempts to suggest a way forward. (author)

Overview of Development and Deployment of Codes, Standards and Regulations Affecting Energy Storage System Safety in the United States

Energy Technology Data Exchange (ETDEWEB)

Conover, David R.

2014-08-22

This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

Deterministic Safety Analysis for Nuclear Power Plants. Specific Safety Guide (Spanish Edition)

International Nuclear Information System (INIS)

2012-01-01

The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the contracting parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

Arianespace Launch Service Operator Policy for Space Safety (Regulations and Standards for Safety)

Science.gov (United States)

Jourdainne, Laurent

2013-09-01

Since December 10, 2010, the French Space Act has entered into force. This French Law, referenced as LOS N°2008-518 ("Loi relative aux Opérations Spatiales"), is compliant with international rules. This French Space Act (LOS) is now applicable for any French private company whose business is dealing with rocket launch or in orbit satellites operations. Under CNES leadership, Arianespace contributed to the consolidation of technical regulation applicable to launch service operators.Now for each launch operation, the operator Arianespace has to apply for an authorization to proceed to the French ministry in charge of space activities. In the files issued for this purpose, the operator is able to justify a high level of warranties in the management of risks through robust processes in relation with the qualification maintenance, the configuration management, the treatment of technical facts and relevant conclusions and risks reduction implementation when needed.Thanks to the historic success of Ariane launch systems through its more than 30 years of exploitation experience (54 successes in a row for latest Ariane 5 launches), Arianespace as well as European public and industrial partners developed key experiences and knowledge as well as competences in space security and safety. Soyuz-ST and Vega launch systems are now in operation from Guiana Space Center with identical and proved risks management processes. Already existing processes have been slightly adapted to cope with the new roles and responsibilities of each actor contributing to the launch preparation and additional requirements like potential collision avoidance with inhabited space objects.Up to now, more than 12 Ariane 5 launches and 4 Soyuz-ST launches have been authorized under the French Space Act regulations. Ariane 5 and Soyuz- ST generic demonstration of conformity have been issued, including exhaustive danger and impact studies for each launch system.This article will detail how Arianespace

European regulations on nutraceuticals, dietary supplements and functional foods: A framework based on safety

International Nuclear Information System (INIS)

Coppens, Patrick; Fernandes da Silva, Miguel; Pettman, Simon

2006-01-01

This article describes the legislation that is relevant in the marketing of functional foods in the European Union (EU), how this legislation was developed as well as some practical consequences for manufacturers, marketers and consumers. It also addresses some concrete examples of how the EU's safety requirements for food products have impacted a range of product categories. In the late nineties, research into functional ingredients was showing promising prospects for the use of such ingredients in foodstuffs. Due mainly to safety concerns, these new scientific developments were accompanied by an urgent call for legislation. The European Commission 2000 White Paper on Food Safety announced some 80 proposals for new and improved legislation in this field. Among others, it foresaw the establishment of a General Food Law Regulation, laying down the principles of food law and the creation of an independent Food Authority endowed with the task of giving scientific advice on issues based upon scientific risk assessment with clearly separated responsibilities for risk assessment, risk management and risk communication. Since then, more than 90% of the White Paper proposals have been implemented. However, there is not, as such, a regulatory framework for 'functional foods' or 'nutraceuticals' in EU Food Law. The rules to be applied are numerous and depend on the nature of the foodstuff. The rules of the general food law Regulation are applicable to all foods. In addition, legislation on dietetic foods, on food supplements or on novel foods may also be applicable to functional foods depending on the nature of the product and on their use. Finally, the two proposals on nutrition and health claims and on the addition of vitamins and minerals and other substances to foods, which are currently in the legislative process, will also be an important factor in the future marketing of 'nutraceuticals' in Europe. The cornerstone of EU legislation on food products, including

Risk based regulation: a convenient concept for legislation and regulation in the field of technical risks?

International Nuclear Information System (INIS)

Seiler, J.H.

1998-01-01

Legislation and regulation concerning risk activities are traditionally based on deterministic safety measures. This may lead to inefficient results: sometimes the law requires safety measures which are - from an economic viewpoint - not justified because of their poor cost-effectiveness; sometimes it does not require safety measures although they would be very efficient. The risk based regulation approach wants to make the law more efficient and to get more safety at less costs. Legislation and regulation should be based on terms of risk rather than on deterministic rules. Risk should be expressed in quantitative terms and risk regulation should be based on the cost-effectiveness of safety measures. Thus a most efficient (in the sense of the economic analysis of the law) strategy for safety and environmental law could be established. The approach is economically reasonable and theoretically convincing. Its practical implementation however raises a lot of technical and legal questions. The project 'Risk Based Regulation' (1996-1999), sponsored by the Swiss National Fund for Scientific Research, intends to evaluate the practical feasibility of the approach from a technical and a legal view. It contains a general part which describes the risk based regulation approach and its legal and technical questions, case studies which try to practically implement the risk based regulation approach; the case studies are: storage and management of explosives in the army, storage and management of explosives for non-military purposes, safety at work, accident prevention in the non-professional field (mainly road accidents), fire protection, transportation of dangerous goods, waste disposal: traditional waste, waste disposal: radioactive waste, nuclear energy (reactor safety), a synthesis with recommendations for the future legislation and regulation in the field of technical risks. The paper presents the project and its preliminary results. (author)

Hamiltonian inclusive fitness: a fitter fitness concept.

Science.gov (United States)

Costa, James T

2013-01-01

In 1963-1964 W. D. Hamilton introduced the concept of inclusive fitness, the only significant elaboration of Darwinian fitness since the nineteenth century. I discuss the origin of the modern fitness concept, providing context for Hamilton's discovery of inclusive fitness in relation to the puzzle of altruism. While fitness conceptually originates with Darwin, the term itself stems from Spencer and crystallized quantitatively in the early twentieth century. Hamiltonian inclusive fitness, with Price's reformulation, provided the solution to Darwin's 'special difficulty'-the evolution of caste polymorphism and sterility in social insects. Hamilton further explored the roles of inclusive fitness and reciprocation to tackle Darwin's other difficulty, the evolution of human altruism. The heuristically powerful inclusive fitness concept ramified over the past 50 years: the number and diversity of 'offspring ideas' that it has engendered render it a fitter fitness concept, one that Darwin would have appreciated.

White paper on nuclear safety in 2004

International Nuclear Information System (INIS)

2005-05-01

The white paper consists of four parts. The first part described the regulation of nuclear facility decommissioning and the clearance level at which the decommissioned waste materials are not necessarily treated as radioactive materials. The second part explained the main operations of the nuclear safety regulation of the Nuclear Safety Commission and the regulatory bodies in 2004 and Mihama unit 3 accident. The third part introduced various activities for the general preservation of nuclear safety in Japan, such as safety regulation systems for nuclear facilities, disaster preparedness of nuclear facilities, progress in nuclear research, environmental radiation surveys and international cooperation on nuclear safety. The forth part contained various materials and data related to the Nuclear Safety Commission. (J.P.N.)

49 CFR 385.311 - What will the safety audit consist of?

Science.gov (United States)

2010-10-01

... SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.311 What will the safety audit consist of? The safety audit will consist of a review of the new entrant's safety management systems and a... 49 Transportation 5 2010-10-01 2010-10-01 false What will the safety audit consist of? 385.311...

Methods for formulation of design basis accidents within a risk-informed approach to safety regulation of new nuclear power plants

International Nuclear Information System (INIS)

Beer, B.C.; Apostolakis, G.E.; Golay, M.W.

2000-01-01

Within a project sponsored by the U.S. Department of Energy (DOE) an investigation is being conducted into creating a risk-informed safety regulatory framework and design process based upon the use of probabilistic risk assessment (PRA). In conjunction with efforts to formulate an overall regulatory framework (i.e., reported in PSAM 5 by F. Duran, A. Camp, G. Apostolakis and M. Golay, 'A Framework for Regulatory Requirements and Industry Standards for New Nuclear Power Plants'), this paper addresses the potential role(s) of Design Basis Accidents (DBAs) within this new framework. Currently that role, if any, is unclear. In previous nuclear safety regulatory treatments, DBAs have been of great practical value for both designers and regulators. However, they have suffered from being inconsistently formulated, and lacking fundamental justification. Any DBA set is likely to be formulated uniquely for a specific reactor concept. The staff of any nuclear power plant (NPP) in the U.S. routinely calculates the likelihood of core damage, the likelihood of radioactive release and the likelihood of adverse health effects due to radioactive release. As the accuracy of such estimates improves industry-wide, safety regulators consider weighing these calculated risks more heavily than strict adherence to the prescriptive conservatisms of existing regulations, hence risk-informed regulation. DBAs, despite their prescriptive nature, can remain useful tools for regulators and designers in a risk-informed regulatory framework, providing that they can be formulated in a fashion consistent with the risk profiles of a plant. DBAs also offer the opportunity to take into account factors of uncertainty not captured in a PRA, which are typically addressed via defense-in-depth features and subjective judgements. Designers seeking only to create a plant having a calculated risk below a certain value, while minimizing cost, may find themselves in an inefficient trial-and-error process as they

Europe's progress towards joint regulation of nuclear safety; Le cheminement de l'Europe vers une reglementation commune sur la surete nucleaire

Energy Technology Data Exchange (ETDEWEB)

Hennenhofer, G. [surete des installations nucleaires et la radioprotection, Ministere de l' Environnement, de la Protection de la nature et de la securite nucleaire (BMU) (Germany)

2010-11-15

Following the end of the Second World War, there was great hope for the use of nuclear energy for peaceful applications. In the beginning, the different approaches adopted by East and West led to the design of different types of reactors, with priority being given to rapid development of the reactor fleet. Cooperation between safety regulators only came about very gradually. The Chernobyl disaster was in this respect the trigger event, as it clearly showed that the effects of nuclear events do not stop at borders and that collaboration by the safety regulators in this field was essential. Texts such as the Convention on Nuclear Safety, requiring the creation of a regulatory body independent of economic interests, the other work done by IAEA on the issue of nuclear safety and, within the European context, the creation of WENRA, are all milestones along the path to close cooperation. The recently adopted European directive on the safety of nuclear installations is the natural successor to these achievements. The road to a common European vision of nuclear safety is now mapped out. Germany will be joining this movement and making its own contribution. (author)

Health Activities Project (HAP): Heart Fitness and Action Module.

Science.gov (United States)

Buller, Dave; And Others

Contained within this Health Activities Project (HAP) learning packet are activities for children in grades 5-8. Design of the activities centers around the idea that students can control their own health and safety. Within the Heart Fitness and Action Module are teacher and student folios describing five activities which involve students in…

49 CFR 385.315 - Where will the safety audit be conducted?

Science.gov (United States)

2010-10-01

... SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.315 Where will the safety audit be conducted? The safety audit will generally be conducted at the new entrant's business premises. ... 49 Transportation 5 2010-10-01 2010-10-01 false Where will the safety audit be conducted? 385.315...

Geothermal FIT Design: International Experience and U.S. Considerations

Energy Technology Data Exchange (ETDEWEB)

Rickerson, W.; Gifford, J.; Grace, R.; Cory, K.

2012-08-01

Developing power plants is a risky endeavor, whether conventional or renewable generation. Feed-in tariff (FIT) policies can be designed to address some of these risks, and their design can be tailored to geothermal electric plant development. Geothermal projects face risks similar to other generation project development, including finding buyers for power, ensuring adequate transmission capacity, competing to supply electricity and/or renewable energy certificates (RECs), securing reliable revenue streams, navigating the legal issues related to project development, and reacting to changes in existing regulations or incentives. Although FITs have not been created specifically for geothermal in the United States to date, a variety of FIT design options could reduce geothermal power plant development risks and are explored. This analysis focuses on the design of FIT incentive policies for geothermal electric projects and how FITs can be used to reduce risks (excluding drilling unproductive exploratory wells).

The Structure and Application of High Level Safety Goals. A Review by the MDEP Sub-committee on Safety Goals

International Nuclear Information System (INIS)

2011-01-01

One of the aims of MDEP is to work towards greater harmonisation of regulatory requirements. To achieve this aim, it is necessary that there is a degree of convergence on the safety goals that are required to be met by designers and operators. The term 'safety goals' is defined to cover all health and safety requirements which must be met: these may be deterministic rules and/or probabilistic targets. They should cover the safety of workers, public and the environment in line with the IAEA's Basic Safety Objective; encompassing safety in normal operation through to severe accidents. All regulators have safety goals, but these are expressed in many different ways and exercises in comparing them frequently are done at a very low level eg specific temperatures in the reactor vessel. The differences in the requirements from different regulators are difficult to resolve as the goals are derived using different principles and assumptions and are for a specific technology. Therefore MDEP set up a sub-committee to investigate a different approach. This approach was to start with the top level goals and to derive a structure and means of deriving lower tier goals that can be seen to be clearly related to the higher level ones. This approach has the potential to greatly assist in the process of harmonisation of regulatory requirements. The paper reviews the high level goals used in MDEP countries and the relevant work of international groups. From these it draws broad conclusions that the form of the framework should be an Hierarchical Structure of Safety Goals, incorporating an extended Defense-in-Depth approach. The basis concept is that the higher level safety goals can then developed, in a coherent and consistent manner, into lower level safety goals and targets that can be applied within the design and operation of reactors, with a clear connection between the different levels. This structured approach is technology-neutral and is sufficiently flexible that it can be

Shutdown channels and fitted interlocks in atomic reactors

International Nuclear Information System (INIS)

Furet, J.; Landauer, C.

1968-01-01

This catalogue consists of tables (one per reactor) giving the following information: number and type of detectors, range of the shutdown channels, nature of the associated electronics, thresholds setting off the alarms, fitted interlocks. These cards have been drawn up with a view to an examination of the reactors safety by the 'Reactor Safety Sub-Commission', they take into account the latest decisions. The reactors involved in this review are: Azur, Cabri, Castor-Pollux, Cesar-Marius-2, Edf-2, EL3, EL4, Eole, G1, G2-G3, Harmonie, Isis, Masurca, Melusine, Minerve, Osiris, Pegase, Peggy, PAT, Rapsodie, SENA, Siloe, Siloette, Triton-Nereide, and Ulysse. (authors) [fr

A Response to Proposed Equal Employment Opportunity Commission Regulations on Employer-Sponsored Health, Safety, and Well-Being Initiatives.

Science.gov (United States)

2016-03-01

The aim of this study was to identify areas of consensus in response to proposed Equal Employment Opportunity Commission Americans with Disabilities Act of 1990 and Genetic Information Nondiscrimination Act of 2008 regulations on employer-sponsored health, safety, and well-being initiatives. The consensus process included review of existing and proposed regulations, identification of key areas where consensus is needed, and a methodical consensus-building process. Stakeholders representing employees, employers, consulting organizations, and wellness providers reached consensus around five areas, including adequate privacy notice on how medical data are collected, used, and protected; effective, equitable use of inducements that influence participation in programs; observance of reasonable alternative standards; what constitutes reasonably designed programs; and the need for greater congruence between federal agency regulations. Employee health and well-being initiatives that are in accord with federal regulations are comprehensive, evidence-based, and are construed as voluntary by employees and regulators alike.

Highway Safety, Economic Behavior, and Driving Environment

OpenAIRE

Keeler, Theodore E.

1991-01-01

Economic analysis has enhanced our understanding of the efficacy of highway safety regulations. Specifically, a consumer-theoretic literature has developed on drivers' responses to regulations, based on ideas first set forth by Lester lave and W. E. Weber (1970) and more fully thought out by Sam Peltzman (1975). Meanwhile, an empirical literature has also developed, testing hypotheses relating to the effects on safety of speed limits, safety-device regulations, and alcohol policies, among oth...

Panel 1: Safety design criteria

International Nuclear Information System (INIS)

Yllera, Javier

2013-01-01

There is general consensus in the nuclear community, and more after the Fukushima accident, that the deployment of nuclear energy has to be done at the highest levels of nuclear safety and that safety cannot be compromised by other factors. It is well understood that reactors that are being licensed and the new generations of reactors that will be constructed in the future will need to reach higher safety levels than the existing ones. Several countries and international organizations or international groups are launching initiatives to harmonise safety goals, safety requirements, safety objectives, regulations, criteria or safety reference levels. There are differences in the meanings of these terms and the working approaches, but the overall purpose is the same: to specify how new plants can be safer. In this context, the IAEA has an statutory function for developing international nuclear safety standards. The IAEA safety standards are per se not mandatory for IAEA Member States. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA’s standards for use in their national regulations in different ways. The IAEA Safety Standards represent international consensus on what must constitute a high level of safety for nuclear installations. In the area of NPP design, IAEA safety standards that are published are intended to apply primarily to new plants. It might not be practicable to apply all the requirements to plants that are already in operation. In addition, the focus is primarily on plants with water cooled reactors

The programme of the Minister of the Interior for technical regulations concerning the safety of nuclear facilities

International Nuclear Information System (INIS)

Berg, K.H.

1977-01-01

The BMI is responsible for the Atomic Energy Act being implemented. A survey is presented of the BMI's programme for setting up technical safety regulations (bar the KTA) according to the following categories: the structure of objects (hardware); the functions of machinery and human behaviour (software); know-how, abilities, responsibility of humans (live-ware); environment. (HP) [de

Fusion reactor passive safety and ignitor risk-based regulation

International Nuclear Information System (INIS)

Zucchetti, M.

1995-01-01

Passive design features are more reliable than operator action of successful operation of active safety systems. Passive safety has usually been adopted for fission. The achievement of an inventory-based passive safety is difficult if the fusion reactor uses neutronic reactions. Ignitor is a high-magnetic field tokamak designed to study the physics of ignited plasmas. The safety goal for Ignitor is classification as a mobility-based passively safe machine

On the role of safety culture in risk-informed regulation

International Nuclear Information System (INIS)

Sorensen, J.N.; Apostolakis, G.E.; Powers, D.A.

2000-01-01

There is a widespread belief that safety culture is an important contributor to safety of operations. The commonly accepted attributes of safety culture include good organizational communications, good organizational learning, and senior management commitment to safety. Safety culture may be particularly important in reducing latent errors in complex, well-defended systems. The role of regulatory bodies in fostering strong safety cultures remains unclear, and additional work is required to define the essential attributes of safety culture and to identify reliable performance indicators. (author)

The development of regulations

International Nuclear Information System (INIS)

Slokan Dusic, D.; Levstek, M.F.; Stritar, A.

2003-01-01

In October 2002, The Act on Protection Against Ionising Radiation and Nuclear Safety which regulates all aspects of protection against ionising radiation and nuclear safety entered into force in Slovenia. The Slovenian government and its responsible ministries shall issue several governmental and ministerial regulations to support the above - mentioned act. The Slovenian Nuclear Safety Administration (SNSA) which acts within the Ministry of the Environment, Spatial Planing and Energy takes an active part in drafting the regulations which are defined in the act. Due to a very comprehensive and pretentious task, that is to be completed in a relatively short period of time, taking into consideration the involvement of stakeholders and all competent ministries, the SNSA within the Quality Management System developed a special procedure that insures the systematic approach to the preparation of regulations. The article will briefly represent the process that: defines the preparation, development, harmonisation, review, approval and issue of regulations and uniforms the format of developed regulations. (author)

Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

International Nuclear Information System (INIS)

Chung, Dae Wook

2011-01-01

Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

Nuclear criticality safety guide

International Nuclear Information System (INIS)

Pruvost, N.L.; Paxton, H.C.

1996-09-01

This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators