WorldWideScience

Sample records for regulation technology saibo

  1. Leading research on cell proliferation regulation technology; Saibo zoshoku seigyo gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing intelligent material, animal test alternative model, bio-cell analysis equipment, self-controlling bio-reactor and medical material, development of functional cells was studied by cell proliferation regulation technology. In fiscal 1996, the expression analysis and separation technology of specific gene for cell proliferation, and the intracellular regulation technology were surveyed from the viewpoint of intracellular regulation. The cell proliferation regulation technology by specific regulating material of cells, extracellular matrix, coculture system and embryonic cell was surveyed from the viewpoint of extracellular regulation. In addition, based on these survey results, new cell culture/analysis technology, new bio-material, artificial organ system, energy saving bio-reactor, environment purification microorganism, and animal test alternative model were surveyed as applications to industrial basic technologies from a long-term viewpoint. The approach to cell proliferation regulation requires preparation of a concrete proliferation regulation technology system of cells, and concrete application targets. 268 refs., 43 figs., 4 tabs.

  2. Function of mammalian genes regulation cellular growth; Saibo zoshoku wo seigyosuru dobutsu saibo idenshi no kino kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, K. [Nagoya University, Nagoya (Japan)

    1995-12-15

    Intracellular signaling from receptor tyrosine kindles in mammalian cells results in activation of a signal cascade that includes the guanine nucleotide binding protein Ras and the protein kinases Raf, MEK [Mitogen activated protein kindle (MAPK) or Extracellular signal regulated kinase (ERK) kinase] and MAPK. MAPK activation that is dependent on the coupling of Ras and Raf was reconstituted in yeast. Yeast genes were isolated that, when overexpressed, enhanced the function of Raf. One of them is identical to BMH 1, which encodes a protein similar to members of the mammalian 14-3-3 family. Bacterially synthesized mammalian 14-3-3 protein stimulated the activity of Raf prepared from yeast cells expressing c-Raf-1. Thus, the 14-3-3 protein may participate in or be required for activation of Raf. 9 refs., 2 figs.

  3. Fiscal 1999 leading research report. Research on 3-D cell tissue module technology; 1999 nendo sanjigen saibo soshiki module kogaku chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For forming cell tissues alternative to bio-tissues, this research targets the technology for forming bio-tissue modules by cultivating 3-D cell tissues from various kinds of cells. In fiscal 1999, research was made on various issues of element technologies necessary for forming module structure of bio-tissues, and study was also made on the application of 3-D cell tissue module engineering to industrial fields. Survey was made on element technologies and solutions supporting such engineering, and in addition, on progressive conditions of cell cultivation techniques, and concrete techniques for expressing cell functions. Research was made on a cell behavior under physicochemical stimulus environment to study the optimum environment for cell multiplication and function expression. Further research was made on state analysis of cells, in particular, fast precise measurement techniques of activation or malignant of cells and secretion of toxic substances by physical/optical analytical evaluation techniques such as photo-CT and spectroscopic analysis, and biochemical analysis techniques using bio-sensors. Study was also made on successful development and application cases of practical bio-artificial organs in western countries. (NEDO)

  4. Research and development of basic technologies for next-generation industries. Evaluation of 2nd phase research and development of technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saibo tairyo baiyo gijutsu. Dainiki kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-03-30

    The project aims to establish basic technologies for the mass culture of cells which will enable a large, stable supply of fine chemical products whose industrial production the conventional technique of synthesis has failed to realize. In the 1st phase, cell stains were selected, a serumless medium was developed, basic culturing conditions were established, and substances production rates were improved, and the 2nd phase stands succeeding these 1st phase achievements. Toward the ultimate goal of establishing basic technologies for serumless high-density cultures for industrial use and technologies for isolating and refining useful substances, a small-scale optimum culture technique and a serumless culture technique are developed. Serumless cultures are developed for strains of man's lymphoid cells, cells deriving from bone marrow, epithelial cells, and hybridomas of man and mouse, all these sampled during the 1st phase endeavors. Success is attained in growing each cell strain on a scale of 1-10L to increase to 10{sup 7} cells/ml or more in population density. It is found that each cell strain produces useful substances, such as man's monoclonal antibodies and elements involved in the multiplication or differentiation of new cells. (NEDO)

  5. Research and development of basic technologies for next-generation industries. Evaluation of 2nd phase research and development of technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saibo tairyo baiyo gijutsu. Dainiki kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-03-30

    The project aims to establish basic technologies for the mass culture of cells which will enable a large, stable supply of fine chemical products whose industrial production the conventional technique of synthesis has failed to realize. In the 1st phase, cell stains were selected, a serumless medium was developed, basic culturing conditions were established, and substances production rates were improved, and the 2nd phase stands succeeding these 1st phase achievements. Toward the ultimate goal of establishing basic technologies for serumless high-density cultures for industrial use and technologies for isolating and refining useful substances, a small-scale optimum culture technique and a serumless culture technique are developed. Serumless cultures are developed for strains of man's lymphoid cells, cells deriving from bone marrow, epithelial cells, and hybridomas of man and mouse, all these sampled during the 1st phase endeavors. Success is attained in growing each cell strain on a scale of 1-10L to increase to 10{sup 7} cells/ml or more in population density. It is found that each cell strain produces useful substances, such as man's monoclonal antibodies and elements involved in the multiplication or differentiation of new cells. (NEDO)

  6. Research, development, and evaluation of basic technologies for next-generation industries. Technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu hyoka. Saibo tairyo baiyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    The project aims to establish basic technologies for the mass culture of cells by utilizing the features of animal cells, which will enable a large, stable supply of fine chemicals such as highly functional physiologically active proteins whose industrial production the conventional technique of synthesis fails to realize. For this purpose, efforts are exerted to select cells which are capable of producing target substances, to breed highly productive strains, to develop a serumless medium that satisfies demands for an all-purpose feature and heat sterilization, and to develop technologies of high-density culture and effective refining, etc. Some DNA (deoxyribonucleic acid) recombination technologies are also resorted to. As the result, a high-density culture of 2 times 10{sup 8} cells/ml has become available. Production is now feasible of various differentiation-inducing elements such as monoclonal antibodies with anti-HB virus activity, DIF, etc. Furthermore, cooperation with the Tsukuba University leads to the discovery of a novel vasopressor peptide (endothelin). The heat sterilization accepting serumless medium, which is put to practical use as the first of the kind in the world under this research and development project, contributes to the advancement of basic studies about cell biology. (NEDO)

  7. Leading research report for fiscal 1998 on the research of basic technologies of cranial nerve cell engineering; 1998 nendo noshinkei saibo kogaku kiban gijutsu no chosa kenkyu sendo kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches are conducted about the present and future of the research and development of elementary technological details for elucidating, from the viewpoint of the level of molecules or cells, the functions of neurons which are the basic elements of the cranial nerve circuit and for applying the results to cranial nerve cell engineering. It is then concluded that the most important and urgent is to 'develop basic technologies for understanding the functions of neural circuits so that a remedial step may be taken in the presence of a defect in a neural circuit and that electronic devices may be applied to help neural functions.' It is agreed that the most immediate and ripple-effective is to 'establish the technology of intelligent connection between electronic devices and neural circuits for the reconstruction of motor functions.' It is also concluded that, upon achievement of the above two goals, new basic technologies will become available for the moderation of problems in the sensor input and motor output systems by means of electronic circuits, for the improvement on efficiency of rehabilitation with the aid of electronics, for the cure of denatured nerves or a damaged spinal cord, for the study of neural circuits, etc., and that a new industrial series will be created through the utilization of the above-mentioned details. (NEDO)

  8. Leading research report for fiscal 1998 on the research of basic technologies of cranial nerve cell engineering; 1998 nendo noshinkei saibo kogaku kiban gijutsu no chosa kenkyu sendo kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches are conducted about the present and future of the research and development of elementary technological details for elucidating, from the viewpoint of the level of molecules or cells, the functions of neurons which are the basic elements of the cranial nerve circuit and for applying the results to cranial nerve cell engineering. It is then concluded that the most important and urgent is to 'develop basic technologies for understanding the functions of neural circuits so that a remedial step may be taken in the presence of a defect in a neural circuit and that electronic devices may be applied to help neural functions.' It is agreed that the most immediate and ripple-effective is to 'establish the technology of intelligent connection between electronic devices and neural circuits for the reconstruction of motor functions.' It is also concluded that, upon achievement of the above two goals, new basic technologies will become available for the moderation of problems in the sensor input and motor output systems by means of electronic circuits, for the improvement on efficiency of rehabilitation with the aid of electronics, for the cure of denatured nerves or a damaged spinal cord, for the study of neural circuits, etc., and that a new industrial series will be created through the utilization of the above-mentioned details. (NEDO)

  9. FY 1997 report on the survey of fundamental technologies in the field of brain neuro-biotechnology; 1997 nendo Sendo kenkyu hokokusho (noshinkei saibo kogaku kiban gijutsu no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan with its rapidly aging society, fundamental technologies are required for the development of artificial nerves substituting for or supporting damaged ones, and ultimately constituting artificial neurons based on the knowledge of the brain functions at the molecular and cellular levels. This study defines the fundamental technologies which would be required for the development in the area, and further, evaluates the potential of the technologies to develop the novel industry. The brain function is closely related to the activity in neuronal circuits. In order to repair injured nerves and to develop the advanced technologies of electronics for helping impaired neuronal functions, the most important and urgent is to understand how to work the neuronal circuit system in the brain. Based on these viewpoints, new methodological approaches would make it possible to relieve neural impairment in the sensory input system and the motor system by the use of electronic circuits. They also would improve rehabilitation after injury, and treat neurodegenerative diseases such as Parkinson`s disease. These advances surely create the new types of industry seeds in near future. 77 refs., 29 figs., 2 tabs.

  10. New technologies to meet regulations

    International Nuclear Information System (INIS)

    Frank, C.; Harmon, L.

    1991-01-01

    The US Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management has set the ambitious goal of having all of its facilities cleaned up and in compliance with applicable environmental laws and regulations by the year 2019. This goal is ambitious both because of the magnitude of the effort required and because, in many cases, the means for attaining the goal do not now exist. The DOE's strategy for reaching its goal is based on applied research and development, education, and cooperation with regulators. The Office of Technology Development (OTD) within the Office of Environmental Restoration and Waste Management has instituted a program to assess the magnitude of the cleanup effort and to evaluate the potential technologies to be used. The OTD has program responsibility for providing new and more effective technologies for meeting DOE's goal for compliance and cleanup. Included are research and development of new technologies; demonstration, testing, and evaluation of technologies developed elsewhere; transportation; and educational programs to produce the scientists and engineers needed to maintain the momentum of research, development, demonstration, testing, and evaluation (RDDT and E) until the job is complete

  11. Environmental regulation and technological innovation

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, A.E. [Carnegie Mellon Electricity Industry Center, Pittsburg, PA (United States)

    2002-07-01

    Government policies are a major factor in the determination of structural conditions of competition. The innovative activity comprises the following: invention, adoption, and diffusion. Invention involves research and development activities such as patenting, research and development budgets. The adoption phase is concerned with deployment. As for the diffusion phase, it involves commercialization, and scale-economies. The process of introducing new technologies that are adopted by small numbers of customers in a niche market was explained. Once costs are lowered through experience gained in designing, manufacturing and servicing the new technology, mew applications generally lead to larger markets. Environmental technologies have no early adopters, implying that governments have an important role to play. However, commercial processes are not normally as well known to government as it is to the private sector. The electoral cycle also interferes with long term research and development efforts for technological clusters. A look at sulphur dioxide control at United States power plants illustrated the problem. The author then explained the reasons behind low allowance prices. Low-sulphur western coal was rendered economic in large areas of the United States by rail deregulation. Electricity restructuring was also a factor. The author indicated that binding government regulation must come before adoption and diffusion of emission controls. A summary of recent research was provided, in which the author stated that no single policy instrument was likely to properly stimulate innovative activity. In those cases where both supply and demand are stimulated by government, the technological innovation is greatest. Stringent regulations induce innovation, as do greater flexibility and greater regulatory certainty. Knowledge transfer within the industry is vital. 8 refs., 3 figs.

  12. Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

  13. Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

  14. Achievement report for fiscal 1987 on the entrusted research and development of basic technologies for next-generation industries. Research and development of technologies of mass culture of cells; 1987 nendo jisedai sangyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    The aim is to add value to the chemical industry by establishing technologies for realizing a large and stable supply of fine chemical products whose industrial production is difficult when conventional techniques are applied, the products including various useful substances yielded by animal cells including those of man. To fulfill the aim, efforts are exerted to complete basic technologies involving the mass culture of cells through conducting researches into animal biofunctions. This report covers the endeavors made in fiscal 1987 under the above-named project created in fiscal 1981. All the subject matters are for the development of substance production methods for industrial use, and include the studies of use of optimal cultivation methods mainly for serumless cultures and cultivation engineering, studies centering on the high-density cultivation of cells and serumless cultures, studies using suspended and quasi-suspended cell lines, studies using cells deriving from bone marrow, and studies using epithelial cells. Furthermore, the results are outlined of the comprehensive researches conducted into technologies of mass cultivation of cells. (NEDO)

  15. ENVIRONMENTAL REGULATIONS AND TECHNOLOGY - THE ELECTROPLATING INDUSTRY

    Science.gov (United States)

    This 44-page Technology Transfer Environmental Regulations and Technology publication is an update of a 1980 EPA publication that has been revised to reflect changes in the EPA regulations, as well as in the pollution control technologies that affect the electroplating industry. ...

  16. Public and private regulation of reproductive technologies.

    Science.gov (United States)

    Byk, C

    1995-01-01

    Human reproduction is interrelated with privacy. However, in most countries where new reproductive technologies are used public regulations have been passed to provide a legal framework for such technologies. This interference in private life can be justified by the need to control medical intervention in the human reproductive process. But in order to find a balance between public regulations and other social regulations, this article analyses the impact private regulation may have on issues raised by reproductive technologies. It also addresses the issue of the influence of private bodies on the drafting of public regulations.

  17. The regulations of the Nuclear Technology Committee

    International Nuclear Information System (INIS)

    Schwarzer, W.

    1984-01-01

    The work of the Nuclear Technology Committee (NTC) is characterised by the key words 'safety related regulations' and 'nuclear technology'. The rationalisation effect desired from regulations and the not unlimited number of experts qualified for working out regulations, make it necessary to establish priorities. The NTC has almost exclusively worked out regulations for nuclear powerstations and mainly for light water reactors. The program defined at present seems to cover the most important areas. Future developments can be foreseen in the execution of the part of the program not yet concluded, the maintenance of the regulations and, depending on the development of nuclear technology, the greater inclusion of the HTR and possibly the expansion of the regulations to fast breeder reactors and plant of the fuel circuit. (orig./HSCH) [de

  18. Innovation, Diffusion, and Regulation in Energy Technologies

    Science.gov (United States)

    Fetter, Theodore Robert

    The innovation and diffusion of new technologies is one of the central concerns of economics. New inventions or technological combinations do not spring fully formed into the world; as firms encounter and learn about new technologies they experiment, refine, and learn about them, improving productivity (and sometimes earning economic rents). Understanding the processes by which firms learn, and how these processes interact with regulations, is fundamental to understanding the emergence of new technologies, their contribution to growth, and the interaction of innovation and regulation. This dissertation addresses how firms learn and respond to regulations in the context of emerging technologies. Within this framework, I address several questions. When production inputs are socially controversial, do firms respond to disclosure laws by voluntarily constraining their inputs? Do these public disclosure laws facilitate knowledge transmission across firms, and if so, what are the implications for public welfare - for instance, do the gains from trade outweigh any effects of reduced incentives for innovation? I study these questions in the context of hydraulic fracturing, though the results offer insight for more general settings. Panning out to a much broader view, I also explore how energy-related technologies - in both generation and consumption - diffuse across national boundaries over time, and whether innovation and diffusion of energy-efficient technologies has led to more or less energy-efficient economic growth. In my first paper, I contribute to improved understanding of the conditions in which information-based regulations, which are increasingly common in multiple policy domains, decrease externalities such as environmental pollution. Specifically, I test whether information disclosure regulations applied to hydraulic fracturing chemicals caused firms to decrease their use of toxic inputs. Prior to these mandatory disclosure laws, some operators voluntarily

  19. Leading research on artificial techniques controlling cellular function; Saibo zoshoku seigyo gijutsu no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Advanced research and its applicability were surveyed to apply the advanced functional cells to industry. The basic target was set to develop, produce, control and utilize the functional cells, such as intelligent materials and self-regulation bioreactors. The regulation factors regarding apotosis, which is a process of cell suicide programmed within the cell itself of multicellular organisms, cell cycle and aging/ageless were investigated. Furthermore, the function of regulatory factors was investigated at the protein level. Injection of factors regulating cellular function and tissue engineering required for the regulation of cell proliferation were investigated. Tissue engineering is considered to be the intracellular regulation by gene transduction and the extracellular regulation by culture methods, such as coculture. Analysis methods for cell proliferation and function of living cells were investigated using the probes recognizing molecular structure. Novel biomaterials, artificial organ systems, cellular therapy and useful materials were investigated for utilizing the regulation techniques of cell proliferation. 425 refs., 85 figs., 9 tabs.

  20. Future Regulations – A Catalyst for Technology Development

    Science.gov (United States)

    Summary of current mobile source regulations and EPA mobile source regulatory authority with an emphasis on how EPA regulations are a driver for the development and introduction of automotive technology.

  1. Timing of adoption of clean technologies by regulated monopolies

    Directory of Open Access Journals (Sweden)

    Youssef Slim Ben

    2015-01-01

    Full Text Available We consider a monopoly firm producing a good and, at the same time, polluting and using fossil energy. By incurring an investment cost, this firm can adopt a lower production cost clean technology using renewable energy. We determine the optimal adoption date for the firm in the case where it is not regulated at all and in the case where it is regulated at each period. Interestingly, the regulated firm adopts the clean technology earlier than what is socially optimal, as opposed to the nonregulated firm. The regulator can induce the firm to adopt the clean technology at the socially optimal date by a postpone adoption subsidy. Nevertheless, the regulator may be interested in the earlier adoption of the firm to encourage the diffusion of the use of clean technologies in other industries.

  2. University students’ self-regulated learning using digital technologies

    Directory of Open Access Journals (Sweden)

    Carmen Yot-Domínguez

    2017-11-01

    Full Text Available Abstract Analysing the process by which students—whether at university or not—manage and facilitate their own learning has been a recurrent educational research problem. Recently, the question arises about how the development of strategies taking place during the aforementioned process could be made easier by using technologies. In an effort to know whether university students really use digital technologies to plan, organize and facilitate their own learning, we have proposed three research questions. Which technologies do university students use to self-regulate their learning? What self-regulated learning strategies do they develop using technologies? What profiles could be identified among students based on their use of self-regulation strategies with technology? To answer these questions, the “Survey of Self-regulated Learning with Technology at the University” was designed. Information from a sample group with 711 students from various universities located in the region of Andalusia (Spain was collected with this survey. The results indicate that university students, even when they are frequent users of digital technology, they tend not to use these technologies to regulate their own learning process. Of all technologies analysed, Internet information search and instant communication tools are used continually. In turn, the most generalised self-regulation learning strategies are those relative to social support. Nevertheless, students differ from each other regarding their use and frequency. There are groups of students who make use of self-regulation strategies when learning with technologies. In this regard, two distinctive groups of students have been identified, who show differentiated self-regulated levels.

  3. Citizenship, Collaborative Technologies and Regulation | Page 8 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The recent rise of a wide range of collaborative information technologies ... and sanitation utilities using web 2.0 applications and/or cellphones (mobile phones). ... Organization for Women in Science for the Developing World (OWSD), IDRC ...

  4. Averting catastrophe: Strategies for regulating risky technologies

    International Nuclear Information System (INIS)

    Morone, J.G.; Woodhouse, E.J.

    1986-01-01

    This nonpartisan study of the imperfect but steadily developing system for containing the risks of such technologies as chemicals, nuclear power, and genetic engineering views regulatory efforts over a period of decades, noting the surprisingly low number of disasters, and finds an ad hoc but intelligent social process at work

  5. Mapping public regulation measures for photovoltaic technologies

    DEFF Research Database (Denmark)

    Sperling, Karl; Mathiesen, Brian Vad; Hvelplund, Frede

    2011-01-01

    There is a relatively large potential for the use of photovoltaic (PV) technologies in the Nordic countries, including Denmark. Optimally designed PV support policies are a main prerequisite for the utilisation of this potential. The paper provides an overview of the main (financial) public...

  6. Environmental regulation and the export dynamics of energy technologies

    International Nuclear Information System (INIS)

    Costantini, Valeria; Crespi, Francesco

    2008-01-01

    The pollution haven hypothesis affirms that an open market regime will encourage the flow of low-technology polluting industries towards developing countries because of potential comparative advantages related to low environmental standards. In contrast, the hypothesis suggested by Porter and van der Linde claims that innovating firms operate in a dynamic competitive situation which allows global diffusion of environmental-friendly technologies. Environmental regulation may represent a relevant mechanism through which technological change is induced. In this way, countries that are subject to more stringent environmental regulations may become net exporters of environmental technologies. This paper provides new evidence on the evolution of export flows of environmental technologies across different countries for the energy sector. Advanced economies, particularly the European Union, have increasingly focused on the role of energy policies as tools for sustaining the development path. The Kyoto Protocol commitments, together with growing import dependence on energy products, have brought attention to the analysis of innovation processes in this specific sector. The analysis uses a gravity model in order to test the determinants and the transmission channels through which environmental technologies for renewable energies and energy efficiency are exported to advanced and developing countries. Our results are consistent with the Porter and van der Linde hypothesis where environmental regulation represents a significant source of comparative advantages. What strongly emerges is that the stringency of environmental regulation supplemented by the strength of the National Innovation System is a crucial driver of export performance in the field of energy technologies. (author)

  7. Strategies to facilitate stakeholder and regulator support for technology deployment

    International Nuclear Information System (INIS)

    Burford, T.D.

    1997-01-01

    Implementation and deployment of new and innovative environmental technologies is impossible without regulator, enduser and stakeholder support. Technologies being developed for different needs require different strategies to facilitate this endorsement. Areas addressed will include technologies developed to meet site specific cleanup needs and those developed for multiple site applications. A third area deals with using site specific technologies at previously unidentified locations. In order to expand the application of these technologies to other sites a plan to include potential site regulators and stakeholders early in the development process should be considered. The Subsurface Contaminant Focus Area has developed a Stakeholder Communication Plan. This plan, in addition to lessons learned from current technology development projects that have successfully obtained this type of support, will provide the basis for the information provided in this paper. The object of this paper is to suggest strategies that could facilitate the implementation and deployment of technologies at environmental sites by involving regulators and stakeholders at the proper time for various applications

  8. Human Dignity and the Ethics and Regulation of Technology

    NARCIS (Netherlands)

    Duwell, M.

    2017-01-01

    This chapter investigates how human dignity might be understood as a normative concept for the regulation of technologies. First, various distinctions that are relevant for the way human dignity can be understood are discussed. It is argued that it is particularly important that we should see human

  9. The Regulation of Food Science and Technology Professions in Europe

    Directory of Open Access Journals (Sweden)

    Rui Costa

    2014-04-01

    Full Text Available The regulation of a profession is justified when it improves consumer protection and public health. Higher education food science and technology (FST degrees, widely offered in many universities in Europe open to a wide range of jobs in the food sectors where the employees could cover different positions, roles and carry out diverse activities dealing with the food production and the quality and safety of the food products. This work reviews the state of the art of the FST regulated professions requiring higher education qualifications in the European countries. The research was carried out by collecting specific information on regulated professions by contacting unions, professional associations, public servant categories/professions, and by visiting national and EU websites.  The data collected for each regulated profession were: country, training/education required, date of implementation of regulation, professional training (if required, capability test (if required and acts required by law to be signed by a regulated professional. Only professions that required a higher education diploma were included in this search. Few countries were found to have a regulated profession in FST, in particular: Food Engineering (Turkey, Food Technologist (Greece, Iceland, Italy and Slovenia, and Oenologist (Italy, Portugal and Spain. FST regulated professions in Europe are thus scarce and have a rather limited history. The Food Technologist in Italy and the Food Engineer in Turkey were found to be the only completely regulated professions found in Europe. Food and professional regulation have been evolved over the years and raised the debate on the regulation of FST professions. Academia as well as other policymakers has to further contribute to this discussion to keep high the standards for quality of education and training of the qualified workforce and professionals in the food sector.

  10. Climate regulation enhances the value of second generation biofuel technology

    Science.gov (United States)

    Hertel, T. W.; Steinbuks, J.; Tyner, W.

    2014-12-01

    Commercial scale implementation of second generation (2G) biofuels has long been 'just over the horizon - perhaps a decade away'. However, with recent innovations, and higher oil prices, we appear to be on the verge of finally seeing commercial scale implementations of cellulosic to liquid fuel conversion technologies. Interest in this technology derives from many quarters. Environmentalists see this as a way of reducing our carbon footprint, however, absent a global market for carbon emissions, private firms will not factor this into their investment decisions. Those interested in poverty and nutrition see this as a channel for lessening the biofuels' impact on food prices. But what is 2G technology worth to society? How valuable are prospective improvements in this technology? And how are these valuations affected by future uncertainties, including climate regulation, climate change impacts, and energy prices? This paper addresses all of these questions. We employ FABLE, a dynamic optimization model for the world's land resources which characterizes the optimal long run path for protected natural lands, managed forests, crop and livestock land use, energy extraction and biofuels over the period 2005-2105. By running this model twice for each future state of the world - once with 2G biofuels technology available and once without - we measure the contribution of the technology to global welfare. Given the uncertainty in how these technologies are likely to evolve, we consider a range cost estimates - from optimistic to pessimistic. In addition to technological uncertainty, there is great uncertainty in the conditions characterizing our baseline for the 21st century. For each of the 2G technology scenarios, we therefore also consider a range of outcomes for key drivers of global land use, including: population, income, oil prices, climate change impacts and climate regulation. We find that the social valuation of 2G technologies depends critically on climate change

  11. Changes in regulation at the science and technology agency

    International Nuclear Information System (INIS)

    Hioki, K.

    1998-01-01

    This paper summarizes recent changes in the regulation at the Science and Technology Agency (STA) of Japan. The changes are based on the lessons learned from the series of incidents at the nuclear facilities of Power Reactor and Nuclear Fuel Development Corporation (PNC). It is considered that the safety culture was missing in the organization, which was reflected in the rating of the International Nuclear Event Scale (INES) level of the incidents. The PNC is going to be reorganized in October 1997, and the outline of the reorganization is also presented. (author)

  12. M-health: the union of technology and healthcare regulations.

    Science.gov (United States)

    Silberman, Mark J; Clark, Lisa

    2012-01-01

    As healthcare continues to become technology-based, so too does the potential for increased governmental regulation of mobile health (m-health). "M-health" is a broad term that applies to hardware or software that is mobile and delivers healthcare wirelessly. M-health includes consumer- and provider-oriented medical applications (apps), such as weight monitoring apps, and medical devices, such as glucose meters, that send health information back to the provider. It is important for anyone entering the field of mobile healthcare, whether developing apps, providing remote medical care, or simply investing in the future of healthcare technology, to understand the impact governmental oversight can have on this industry. Understanding the different roles to be played by the federal and state governments can be the difference between success and frustration.

  13. 76 FR 34886 - General Services Administration Acquisition Regulation; Implementation of Information Technology...

    Science.gov (United States)

    2011-06-15

    ... Acquisition Regulation; Implementation of Information Technology Security Provision AGENCY: Office of... information technology (IT) supplies, services and systems with security requirements. DATES: Effective Date... effective date that include information technology (IT) supplies, services and systems with security...

  14. 77 FR 749 - General Services Administration Acquisition Regulation; Implementation of Information Technology...

    Science.gov (United States)

    2012-01-06

    ... Acquisition Regulation; Implementation of Information Technology Security Provision AGENCY: Office of... orders that include information technology (IT) supplies, services and systems. DATES: Effective Date... 6, 2012 that include information technology (IT) supplies, services and systems with security...

  15. Through Patients' Eyes: Regulation, Technology, Privacy, and the Future.

    Science.gov (United States)

    Petersen, Carolyn

    2018-04-22

    Privacy is commonly regarded as a regulatory requirement achieved via technical and organizational management practices. Those working in the field of informatics often play a role in privacy preservation as a result of their expertise in information technology, workflow analysis, implementation science, or related skills. Viewing privacy from the perspective of patients whose protected health information is at risk broadens the considerations to include the perceived duality of privacy; the existence of privacy within a context unique to each patient; the competing needs inherent within privacy management; the need for particular consideration when data are shared; and the need for patients to control health information in a global setting. With precision medicine, artificial intelligence, and other treatment innovations on the horizon, health care professionals need to think more broadly about how to preserve privacy in a health care environment driven by data sharing. Patient-reported privacy preferences, privacy portability, and greater transparency around privacy-preserving functionalities are potential strategies for ensuring that privacy regulations are met and privacy is preserved. Georg Thieme Verlag KG Stuttgart.

  16. Validation of an Instrument to Measure Students' Motivation and Self-Regulation towards Technology Learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-01-01

    Background: Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose: The present study is to validate an…

  17. Future impact of Blockchain technologies on services, businesses and regulation

    OpenAIRE

    Di Matteo, Tiziana; Aste, Tomaso; Tasca, Paolo

    2017-01-01

    We introduce basic concepts about Blockchain and discuss the future, foreseeable impact of Blockchain technologies onto our industry and society. The paper briefly tracks the origins of this technology from the Bitcoin digital cash system and describes applications ad applicability in other domains highlighting potentials as well as weaknesses, limitations and risks.

  18. Validation of an instrument to measure students' motivation and self-regulation towards technology learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-05-01

    Background:Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose:The present study is to validate an instrument for assessing senior high school students' motivation and self-regulation towards technology learning. Sample:A total of 1822 Taiwanese senior high school students (1020 males and 802 females) responded to the newly developed instrument. Design and method:The Motivation and Self-regulation towards Technology Learning (MSRTL) instrument was developed based on the previous instruments measuring students' motivation and self-regulation towards science learning. Exploratory and confirmatory factor analyses were utilized to investigate the structure of the items. Cronbach's alpha was applied for measuring the internal consistency of each scale. Furthermore, multivariate analysis of variance was used to examine gender differences. Results:Seven scales, including 'Technology learning self-efficacy,' 'Technology learning value,' 'Technology active learning strategies,' 'Technology learning environment stimulation,' 'Technology learning goal-orientation,' 'Technology learning self-regulation-triggering,' and 'Technology learning self-regulation-implementing' were confirmed for the MSRTL instrument. Moreover, the results also showed that male and female students did not present the same degree of preference in all of the scales. Conclusions:The MSRTL instrument composed of seven scales corresponding to 39 items was shown to be valid based on validity and reliability analyses. While male students tended to express more positive and active performance in the motivation scales, no gender differences were found in the self-regulation scales.

  19. New cooling regulation technology of secondary cooling station in DCS

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xuan; Yan, Jun-wei; Zhu, Dong-sheng; Liu, Fei-long; Lei, Jun-xi [The Key Lab of Enhanced Heat Transfer and Energy Conservation of Ministry of Education, School of Chemical and Energy Engineering, South China University of Technology, Guangzhou 510641 (China); Liang, Lie-quan [The Key Lab of E-Commerce Market Application Technology of Guangdong Province, Guangdong University of Business Studies, Guangzhou 510320 (China)

    2008-07-01

    In this paper, a kind of new control technology of secondary cooling station (constant flow rate/variable temperature difference) in district cooling system (DCS) is proposed in view of serial consequences including low efficiency and high operating cost caused by low temperature of supply water in DCS. This technology has been applied in DCS of Guangzhou University City. The result has already indicated that such technology can increase the supply and return temperatures of buildings, return water temperature of primary side in the plate heat exchanger unit, moreover, the efficiency of both the chiller and the whole system are improved significantly. (author)

  20. Privacy Protection: Regulations and Technologies, Opportunities and Threats

    OpenAIRE

    PEDRESCHI, Dino; BONCHI, Francesco; TURINI, Franco; VERYKIOS, Vassilios; Atzori, Maurizio; Malin, Brad; MOELANS, Bart; SAYGIN, Yucel

    2008-01-01

    nformation and communication technologies (ICTs) touch many aspects of our lives. The integration of ICTs is enhanced by the advent of mobile, wireless, and ubiquitous technologies. ICTs are increasingly embedded in common services, such as mobile and wireless communication, Internet browsing, credit card e-transactions, and electronic health records. As ICT-based services become ubiquitous, our everyday actions leave behind increasingly detailed digital traces in the information systems of I...

  1. Technical guideline technology according to the X-ray regulations

    International Nuclear Information System (INIS)

    2011-01-01

    The guideline covers the required technical knowledge concerning radiation protection and knowledge concerning for the operation of X-ray devices for technical purposes and stray radiation sources requiring licensing, and requirements for the qualification of officially authorized inspectors. The guidelines includes the following chapters: (1) introductory regulations; (2) Volume of the required technical knowledge; (3) Acquirement and certification of the technical knowledge; (4) Actualization of the technical knowledge; (5)Approval of courses and other training measures; (6) Combination of courses and training measures according to the guideline; (7) Requirements for qualification of officially authorized inspectors; (8) Interim regulations.

  2. Future carbon regulations and current investments in alternative coal-fired power plant technologies

    International Nuclear Information System (INIS)

    Sekar, Ram C.; Parsons, John E.; Herzog, Howard J.; Jacoby, Henry D.

    2007-01-01

    We analyze how uncertain future US carbon regulations shape the current choice of the type of power plant to build. Our focus is on two coal-fired technologies, pulverized coal (PC) and integrated coal gasification combined cycle technology (IGCC). The PC technology is cheapest-assuming there is no need to control carbon emissions. The IGCC technology may be cheaper if carbon must be captured. Since power plants last many years and future regulations are uncertain, a US electric utility faces a standard decision under uncertainty. A company will confront the range of possible outcomes, assigning its best estimate of the probability of each scenario, averaging the results and determining the power plant technology with the lowest possible cost inclusive of expected future carbon related costs, whether those costs be in the form of emissions charges paid or capital expenditures for retrofitting to capture carbon. If the company assigns high probability to no regulation or to less stringent regulation of carbon, then it makes sense for it to build the PC plant. But if it assigns sufficient probability to scenarios with more stringent regulation, then the IGCC technology is warranted. We provide some useful benchmarks for possible future regulation and show how these relate back to the relative costs of the two technologies and the optimal technology choice. Few of the policy proposals widely referenced in the public discussion warrant the choice of the IGCC technology. Instead, the PC technology remains the least costly. However, recent carbon prices in the European Emissions Trading System are higher than these benchmarks. If it is any guide to possible future penalties for emissions in the US, then current investment in the IGCC technology is warranted. Of course, other factors need to be factored into the decision as well

  3. 34 CFR 400.3 - What other regulations apply to the Vocational and Applied Technology Education Programs?

    Science.gov (United States)

    2010-07-01

    ... Applied Technology Education Programs? 400.3 Section 400.3 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.3 What other regulations apply to the Vocational and Applied Technology Education Programs? The following regulations apply to the...

  4. Outsourcing Technology in Government: Owned, Controlled, or Regulated Institutions.

    Science.gov (United States)

    Gordon, Mark L.; Walsh, Timothy P.

    1997-01-01

    Examines the growing trend toward and objectives of government outsourcing of information technology (IT) both in the United States and around the world. Describes representative outsourcing arrangements; highlights steps governments should take to ensure that objectives are met; and discusses factors influencing management of public sector…

  5. Rethinking Regulation for Experimenting with Emerging Robotics Technologies

    NARCIS (Netherlands)

    Fosch Villaronga, Eduard; Heldeweg, Michiel A.

    2016-01-01

    Great expectations and major concerns accompany the development and possible uses of robotics in many areas of life and in many forms, such as drones and care-robots. Possible pro’s and con’s require careful regulatory attention, both as regards technological aspects and with respect to

  6. Government regulation's impact on health care technology companies

    Science.gov (United States)

    McGlynn, J. C.

    1994-12-01

    Startups in the medical device industry have made major advances to medical technology. Today the ability to fund these companies is being adversely effected by the difficulty in accessing capital. The capital markets had been disrupted by uncertainty about healthcare reform and by changes in the FDA regulatory process. Both of these have adversely effected market valuations for medical device components.

  7. THE SYNTHESIS AND ANALYSIS INFORMATION TECHNOLOGY OF INTERACTIVE REGULATIONS FUNCTIONAL MODELS

    Directory of Open Access Journals (Sweden)

    Владимир Александрович ТИМОФЕЕВ

    2016-02-01

    Full Text Available A person has no ability to capture entirely and to estimate correctly the logical coherence and consistency of Regulations in the Text Form. It leads to mistakes in a work of an Enterprise Staff and to the impossibility of mastering of the Regulations with considerable volume. Presented Information Technology allows the Regulations Executor to receive on-line proper information of the Optimum Actions in any possible Situation, which can arise in the course of the work. Leading Experts of any Enterprise may create the full-fledged Expert System by themselves with the help of Specialized Software. Such a System will contain the knowledge in the Functional Model of Regulations (the Optimum Business Process. Stages of realization of the represented Information Technology and the peculiarities of on-line data displaying for the Regulations Executor are illustrated by the Pharmacy Customer Service Regulations.

  8. Regulation tomorrow : What happens when technology is faster than the law?

    NARCIS (Netherlands)

    Vermeulen, Erik; Fenwick, Mark; Kaal, Wulf A.

    2016-01-01

    In an age of constant, complex and disruptive technological innovation, knowing what, when, and how to structure regulatory interventions has become much more difficult. Regulators can find themselves in a situation where they believe they must opt for either reckless action (regulation without

  9. Exploring car manufacturers' responses to technology-forcing regulation : The case of California's ZEV mandate

    NARCIS (Netherlands)

    Wesseling, Joeri; Farla, J. C M; Hekkert, M. P.

    2015-01-01

    The ability of firms to influence environmental regulation has largely been overlooked in transition studies. We study how car manufacturers combine and change their innovation and political influence strategies in response to a technology-forcing regulation. We apply a conceptual framework on

  10. The choice of strategic alternatives under increasing regulation in high technology companies.

    Science.gov (United States)

    Birnbaum, P H

    1984-09-01

    The strategic response of U.S. high technology companies in the medical X-ray manufacturing industry to increased governmental regulations from 1962 to 1977 is examined. Results suggest that regulations increase consumer and competitor uncertainty, with the consequence that firms select less risky strategies and decrease the riskier new product invention strategy. Larger firms reduce inventions less than smaller firms.

  11. Governance strategies for living technologies: bridging the gap between stimulating and regulating technoscience.

    Science.gov (United States)

    van Est, Rinie; Stemerding, Dirk

    2013-01-01

    The life sciences present a politically and ethically sensitive area of technology development. NBIC convergence-the convergence of nanotechnology, biotechnology, and information and cognitive technology-presents an increased interaction between the biological and physical sciences. As a result the bio-debate is no longer dominated by biotechnology, but driven by NBIC convergence. NBIC convergence enables two bioengineering megatrends: "biology becoming technology" and "technology becoming biology." The notion of living technologies captures the latter megatrend. Accordingly, living technology presents a politically and ethically sensitive area. This implies that governments sooner or later are faced with the challenge of both promoting and regulating the development of living technology. This article describes four current political models to deal with innovation promotion and risk regulation. Based on two specific developments in the field of living technologies-(psycho)physiological computing and synthetic biology-we reflect on appropriate governance strategies for living technologies. We conclude that recent pleas for anticipatory and deliberative governance tend to neglect the need for anticipatory regulation as a key factor in guiding the development of the life sciences from a societal perspective. In particular, when it is expected that a certain living technology will radically challenge current regulatory systems, one should opt for just such a more active biopolitical approach.

  12. Tightening water quality regulations produces an innovative separation technology

    International Nuclear Information System (INIS)

    Welther, P.B.; Broussard, P.C.

    1994-01-01

    The impact of the recent proposed changes in the water quality standards for offshore producing platforms is having a far reaching effect on the oil and gas industry. At a time when oil companies are cutting back their work forces and reducing capital outlays in order to stay competitive in the market, water treatment equipment manufacturing companies are aggressively seeking innovative and cost effective solutions to meet the environmental requirements. Necessity drives advancements in technology, so Monosep Corporation has accepted the challenge to improve induced gas flotation technology and to develop enhanced gravity separation. This system of improved gas flotation and enhanced gravity separation can be used to consistently meet the proposed new guideline of an ''oil and grease'' maximum monthly average of 29 mg/l (milligrams per liter) in the discharged water from offshore platforms. The results demonstrated in the field suggest that adding enhanced gravity separation upstream of existing gas flotation units can improve performance sufficient to meet the Proposed stricter discharge limits. For platforms that do not have efficient gas flotation units, the old units can be replaced or modified to include the new features improved gas flotation technology like the Veirsep. For those few platforms are having difficulty meeting the current discharge requirements, both a new improved gas flotation unit, as well as a more sophisticated upstream gravity separator like the Cyclosep, may need to be installed. Chemical additives are sometimes a required necessity, but must be used sparingly due to the potential for creating soluble oil problems

  13. 76 FR 31415 - Federal Acquisition Regulation; Buy American Exemption for Commercial Information Technology...

    Science.gov (United States)

    2011-05-31

    ... 9000-AL62 Federal Acquisition Regulation; Buy American Exemption for Commercial Information Technology... from the Buy American Act for acquisition of information technology that is a commercial item. DATES: Effective Date: May 31, 2011. FOR FURTHER INFORMATION CONTACT: Ms. Cecelia L. Davis, Procurement Analyst, at...

  14. The impact of environmental regulations on drilling fluid technology

    International Nuclear Information System (INIS)

    Clark, R.K.

    1994-01-01

    A multitude of new drilling fluid products, systems, and treatment processes have been developed in recent years in response to increasingly stringent environmental regulations. Many fluid additives and systems that once played a major role in the drilling industry are little used today or are no longer available. New water-base mud systems are approaching the performance levels typical of conventional oil-base muds, levels largely achieved by the new synthetic-base fluids. However, these new drilling fluids do not have the adverse environmental impact associated with oil-base systems when waste fluids and cuttings are discarded. 65 refs., 3 tabs

  15. Sustainable recycling of automotive products in China: Technology and regulation

    Science.gov (United States)

    Chen, Ming

    2006-08-01

    The Chinese economy is growing rapidly, but accompanyingsuch growth are issues of environmental protection and social inequity which must be addressed. With the Automobile Industry Development Policy and the Motor Vehicle Product Recovery Technology Policy, an automobile products recoverability target has been established and will be incorporated into an automobile products authentication management system in China. By 2010, for all end-of-life automobile products, reuse and recovery shall be increased to a minimum of 85% by average weight per vehicle, and the use of lead, mercury, cadmium, and hexavalent chromium is prohibited. This paper will address the sustainable recycling of Chinese automobile products within the period of 2006 2010.

  16. Lifetime Management in Non-US-Technology Nuclear Power Plants using US Regulations

    International Nuclear Information System (INIS)

    Cornelius Steenkamp, J.; Encabo Espartero, J.; Garcia Iglesias, R.

    2013-01-01

    In July 2009 the Spanish Nuclear Regulator (CSN) issued a Safety Instruction (IS-22) for the development of Lifetime Management in the Nuclear Power Plants within Spain. The context of this Safety Instruction is based on the American Regulations 10CFR54, NUREG1800/1801 and the technical guide NEI95-10. All these regulations are aimed at US-Technology Nuclear Power Plants. Lifetime Management of Nuclear Power Plants with a plant design different from US technologies can most certainly be developed with the mentioned US regulations. The successful development of Lifetime Management in these cases depends on the adaptation of the different requirements of the regulations. Challenges resulting from the adaptation process can be resolved by taking into consideration the plant design of the plant in question.

  17. Scenarios for a urban energy transition. Actors, regulations, technologies

    International Nuclear Information System (INIS)

    Debizet, Gilles; Blanco, Sylvie; Buclet, Nicolas; Forest, Fabrice; Gauthier, Caroline; La Branche, Stephane; Menanteau, Philippe; Schneuwly, Patrice; Tabourdeau, Antoine

    2016-01-01

    Cities concentrate populations, consumptions, levers of actions, and are places of various experiments for energy transition. This book aims at giving an overview of possible scenarios of development of renewable energies in urban context. It is based on interviews of actors of the energy, building and urban planning sectors by researchers in town planning, management, technology, political and economic sciences. The authors examine what would occur if large companies would manage entire quarters, if local authorities would supervise production and supply, if the State would take control of all fields of action again, or if consumer cooperatives would exchange energy and pool productions. In its different chapters, the book presents four scenarios of energy coordination in urban context by 2040, discuss energy transition in urban spaces, discuss the perspectives of evolution towards more autonomous cities and quarters from an energetic point of view, and discuss business models and urban energetic innovations

  18. The role of technology in the de-regulated electricity marketplace

    International Nuclear Information System (INIS)

    Seckington, B.

    1999-01-01

    There are certain priorities for a power generation company in a deregulated market including: low cost client satisfaction, end-use technologies and quality and reliability performance; low cost/high marginal profit generation for the shareholder's values; and minimum environmental impacts, that are economically affordable and consistent with or better than regulations requirements. R and D strategic directions over time include the short term, medium term and long term, corresponding to 1-3 years, 4-6 years, and 7-10 years. In the short term, technology is operational, while in the medium term it is transitional and includes existing new technology. In the long term, there is a new generation technology emerging, and in the strategic long term of 11-20 years, there is new technology enhancement and visionary technology emerging. For short term technology in order to optimize profitability and assets, certain things are essential: for nuclear, get existing units back on track; for hydro, life management of existing equipment; and for coal, improve efficiency, optimize OMA/re-investment and improve environmental performance. Other minor means of generation and corresponding comments are added. For medium term technology in order to optimize profitability and assets, certain things are necessary including: for nuclear, get and maintain existing units on track; for hydro, life management of existing equipment; and for coal, improve efficiency, optimize OMA/re-investment and improve environmental performance. Other minor generation means are mentioned in the near term. For generation R and D in the long term, brief comments are made concerning what can be done to optimize profitability and meet new regulations, with existing assets to improve cost and environmental performance, with new generation and environmental technologies, and taking risks with developing visionary technologies, both environmental and generational. Further comments concerning optimizing

  19. Self-regulation of recombinant DNA technology in Japan in the 1970s.

    Science.gov (United States)

    Nagai, Hiroyuki; Nukaga, Yoshio; Saeki, Koji; Akabayashi, Akira

    2009-07-01

    Recombinant DNA technology was developed in the United States in the early 1970s. Leading scientists held an international Asilomar Conference in 1975 to examine the self regulation of recombinant DNA technology, followed by the U.S. National Institutes of Health drafting the Recombinant DNA Research Guidelines in 1976. The result of this conference significantly affected many nations, including Japan. However, there have been few historical studies on the self-regulation of recombinant technologies conducted by scientists and government officials in Japan. The purpose of this paper is to analyze how the Science Council of Japan, the Ministry of Education, Science adn Culture, and the Science and Technology Agency developed self-regulation policies for recombinant DNA technology in Japan in the 1970s. Groups of molecular biologist and geneticists played a key role in establishing guidelines in cooperation with government officials. Our findings suggest that self-regulation policies on recombinant DNA technology have influenced safety management for the life sciences and establishment of institutions for review in Japan.

  20. Analysis of Global CCS Technology, Regulations and Its Potential for Emission Reduction with Focus on China

    OpenAIRE

    Fan, Ying; Zhu, Lei; Zhang, Xiaobing

    2011-01-01

    This paper introduces the development of Carbon Capture and Storage (CCS) technology, the progress in CCS demonstration projects, and regulations and policies related to CCS. Barriers and limitations for the large-scale deployment of CCS are discussed. CCS and different technological solutions for emission reduction (e.g., energy conservation and renewable energy) are compared. The analysis shows that China should carefully evaluate the negative impacts of CCS deployment and needs to enhance ...

  1. Self-regulated and technology-enhanced learning: a European perspective

    NARCIS (Netherlands)

    Mooij, Ton; Steffens, Karl; Andrade, Maureen Snow

    2014-01-01

    Self-regulation of learning, learning to learn, and their potential stimulation by specific Information and Communication Technologies (ICTs), are main topics in European policy. This issue of the ‘European Educational Research Journal’ (EERJ) focuses on research to develop, integrate, and evaluate

  2. Self-regulated and technology-enhanced learning: a European perspective

    NARCIS (Netherlands)

    Mooij, Ton; Steffens, Karl; Andrade, Maureen Snow

    2015-01-01

    Self-regulation of learning, learning to learn, and their potential stimulation by specific Information and Communication Technologies (ICTs), are main topics in European policy. This issue of the ‘European Educational Research Journal’ (EERJ) focuses on research to develop, integrate, and evaluate

  3. Students' Characteristics, Self-Regulated Learning, Technology Self-Efficacy, and Course Outcomes in Online Learning

    Science.gov (United States)

    Wang, Chih-Hsuan; Shannon, David M.; Ross, Margaret E.

    2013-01-01

    The purpose of this study was to examine the relationship among students' characteristics, self-regulated learning, technology self-efficacy, and course outcomes in online learning settings. Two hundred and fifty-six students participated in this study. All participants completed an online survey that included demographic information, the modified…

  4. FDA Regulation of Clinical Applications of CRISPR-CAS Gene-Editing Technology.

    Science.gov (United States)

    Grant, Evita V

    Scientists have repurposed an adaptive immune system of single cell organisms to create a new type of gene-editing tool: CRISPR (clustered regularly interspaced short palindromic repeats)-Cas technology. Scientists in China have reported its use in the genome modification of non-viable human embryos. This has ignited a spirited debate about the moral, ethical, scientific, and social implications of human germline genome engineering. There have also been calls for regulations; however, FDA has yet to formally announce its oversight of clinical applications of CRISPR-Cas systems. This paper reviews FDA regulation of previously controversial biotechnology breakthroughs, recombinant DNA and human cloning. It then shows that FDA is well positioned to regulate CRISPR-Cas clinical applications, due to its legislative mandates, its existing regulatory frameworks for gene therapies and assisted reproductive technologies, and other considerations.

  5. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-01

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI. PMID:29382112

  6. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Jiangfeng Hu

    2018-01-01

    Full Text Available This study examines the spillover effects of foreign direct investment (FDI on green technology progress rate (as measured by the green total factor productivity. The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  7. Environmental Regulation, Foreign Direct Investment and Green Technological Progress-Evidence from Chinese Manufacturing Industries.

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-29

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications-high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  8. Regulation of gene expression by manipulating transcriptional repressor activity using a novel CoSRI technology.

    Science.gov (United States)

    Xu, Yue; Li, Song Feng; Parish, Roger W

    2017-07-01

    Targeted gene manipulation is a central strategy for studying gene function and identifying related biological processes. However, a methodology for manipulating the regulatory motifs of transcription factors is lacking as these factors commonly possess multiple motifs (e.g. repression and activation motifs) which collaborate with each other to regulate multiple biological processes. We describe a novel approach designated conserved sequence-guided repressor inhibition (CoSRI) that can specifically reduce or abolish the repressive activities of transcription factors in vivo. The technology was evaluated using the chimeric MYB80-EAR transcription factor and subsequently the endogenous WUS transcription factor. The technology was employed to develop a reversible male sterility system applicable to hybrid seed production. In order to determine the capacity of the technology to regulate the activity of endogenous transcription factors, the WUS repressor was chosen. The WUS repression motif could be inhibited in vivo and the transformed plants exhibited the wus-1 phenotype. Consequently, the technology can be used to manipulate the activities of transcriptional repressor motifs regulating beneficial traits in crop plants and other eukaryotic organisms. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  9. Using vehicle-to-grid technology for frequency regulation and peak-load reduction

    Science.gov (United States)

    White, Corey D.; Zhang, K. Max

    This paper explores the potential financial return for using plug-in hybrid electric vehicles as a grid resource. While there is little financial incentive for individuals when the vehicle-to-grid (V2G) service is used exclusively for peak reduction, there is a significant potential for financial return when the V2G service is used for frequency regulation. We propose that these two uses for V2G technology are not mutually exclusive, and that there could exist a "dual-use" program that utilizes V2G for multiple uses simultaneously. In our proposition, V2G could be used for regulation on a daily basis to ensure profits, and be used for peak reduction on days with high electricity demand and poor ambient air quality in order to reap the greatest environmental benefits. The profits for the individual in this type of dual-use program are close to or even higher than the profits experienced in either of the single-use programs. More importantly, we argue that the external benefits of this type of program are much greater as well. At higher V2G participation rates, our analysis shows that the market for regulation capacity could become saturated by V2G-based regulation providers. At the same time, there is plenty of potential for widespread use of V2G technology, especially if the demand for regulation, reserves, and storage grows as more intermittent renewable resources are being incorporated into the power systems.

  10. Trends in the use of digital technology for control and regulation of power supplies

    International Nuclear Information System (INIS)

    Carwardine, J.; Lenkszus, F.

    1999-01-01

    Since the availability of computers, accelerator power supplies have relied on digital technology in some way, from such simple tasks as turning the supplies on and off to the supplying of computer-controlled references. However, advances in digital technology, both in performance and cost, allow considerably more than simple control and monitoring. This, coupled with increasing demand for higher performance and monitoring capabilities, has made it appealing to integrate such technology into power supply designs. This paper will review current trends in the use of such advanced technology as embedded DSP controllers, and the application of real-time algorithms to the regulation and control of power supplies for accelerators and other large-scale physics applications

  11. The Study of the Application Rate of Effective Learning Technologies in Self-Regulation of KFU and VIIU Students

    Science.gov (United States)

    Khuziakhmetov, Anvar N.; Amin, Azimi Sayed

    2015-01-01

    The aim of the present research is the study of the application rate of learning technologies in KFU and VIIU electronic courses to improve students' self-regulation. For this aim, this research was based on Kitsantas research, the rate of the use of effective learning technologies in students' self-regulation in electronic courses in these two…

  12. To the Question of Legal Regulation in Conditions of Information Technologies Development

    Directory of Open Access Journals (Sweden)

    Alexander A. Galushkin

    2014-12-01

    Full Text Available In the present article author analyzes questions of legal regulation of the new public relations which appeared in connection with development and a wide circulation of new information and information and communication technologies. In article author carries out the analysis of questions of cyberwars and cyberespionage, opinions of the Russian and foreign scientists are analyzed. In the conclusion author draws a conclusion that emergence of new technologies and their active distribution in society generates a set of the legal problems needing to development of adequate legal decisions.

  13. PRESBYOPIA OPTOMETRY METHOD BASED ON DIOPTER REGULATION AND CHARGE COUPLE DEVICE IMAGING TECHNOLOGY.

    Science.gov (United States)

    Zhao, Q; Wu, X X; Zhou, J; Wang, X; Liu, R F; Gao, J

    2015-01-01

    With the development of photoelectric technology and single-chip microcomputer technology, objective optometry, also known as automatic optometry, is becoming precise. This paper proposed a presbyopia optometry method based on diopter regulation and Charge Couple Device (CCD) imaging technology and, in the meantime, designed a light path that could measure the system. This method projects a test figure to the eye ground and then the reflected image from the eye ground is detected by CCD. The image is then automatically identified by computer and the far point and near point diopters are determined to calculate lens parameter. This is a fully automatic objective optometry method which eliminates subjective factors of the tested subject. Furthermore, it can acquire the lens parameter of presbyopia accurately and quickly and can be used to measure the lens parameter of hyperopia, myopia and astigmatism.

  14. EU Criminal Law and the Regulation of Information and Communication Technology

    Directory of Open Access Journals (Sweden)

    Sarah Summers

    2015-07-01

    Full Text Available The opportunities afforded by the global information space give rise to the potential for the commission of new crimes –crimes such as hacking or denial of service attacks– and for existing crimes, such as speech offences or fraud, to be committed in new ways and with potentially larger consequences. One of the biggest challenges for the regulation of information and communications technology is that the global information space does not respect national boundaries. In order to be successful, any regulatory approach will call for some degree of cooperation between countries. This poses an obvious problem for those seeking to develop a regulatory structure. This challenge is particularly relevant in the criminal law context, as the criminal law has traditionally been considered to be the product and responsibility of national law. This article considers the EU’s regulatory approach in this area. The aim here is not to offer a critique of the EU’s regulatory structure in the context of cybercrime, but rather to use the situation in the EU to illustrate various issues arising in the context of the criminal law regulation of information and communications technology. This article examines some of the issues which have arisen in the context of the regulation of cyber activity at the EU level as a result of this tension between national sovereignty and broader overarching EU regulation and assesses the relevance of these issues in the context of criminal law regulation more broadly. Consideration of the processes of criminalisation and harmonisation provides the basis for an analysis of the manner in which the EU seeks to justify its involvement in criminal law in this field.

  15. Radiation protection technology. Specific course for authorized radiation protection representatives according the qualification guidelines technology for the radiation protection regulations (StrlSchV) and X-ray regulation (RoeV). 2. rev. ed.

    International Nuclear Information System (INIS)

    Rahn, Hans-Joachim

    2012-01-01

    The specific course for authorized radiation protection representatives according the qualification guidelines technology for the radiation protection regulations (StrlSchV) and X-ray regulation (RoeV). Covers the following issues: radiation protection - generally; licenses and notifications; scientific fundamentals; dosimetry, surveillance, control, documentation; technical radiation protection; radiation protection calculations.

  16. ISO New England: Results of Ancillary Service Pilot Programs, Alternative Technology Regulation Pilot Program and Demand Response Reserves Pilot Program

    Energy Technology Data Exchange (ETDEWEB)

    Lowell, Jon [ISO New England, Holyoke, MA (United States); Yoshimura, Henry [ISO New England, Holyoke, MA (United States)

    2011-10-26

    This PowerPoint presentation compares performance of pilot program assets and generation resources in alternative technology regulation and demand response reserves for flywheels and residential electric thermal storage.

  17. The method of using current regulations and standards in designing management and technologies of construction

    Directory of Open Access Journals (Sweden)

    Sinenko Sergey

    2017-01-01

    Full Text Available Economic efficiency of using funds in construction of buildings and structures begins from an effective, proper design, which is based on modern, cutting-edge, advanced equipment, streamlined organization and process solutions of construction operations. In the light of this it is considered application of “Self-Organization and Technology of Building” multifunctional software package capable of solving various engineering tasks on designing management of construction operations in accordance with the applicable rules and regulations in view of using software for automatic generation of workflow. Implementing this software in the construction management processes may help to solve management tasks at the construction site.

  18. Technology versus demand regulation - strategic modelling of transport, land use and energy scenarios

    International Nuclear Information System (INIS)

    Pfaffenbichler, Paul C.; Shepherd, Simon

    2007-01-01

    Scarcity of oil supply is seen as one of the biggest future threats to our society. The recently finished EU-funded research project STEPs (Scenarios for the Transport System and Energy Supply and their Potential Effects) had the objective to develop, compare and assess possible scenarios for the transport system and the energy supply of the future taking into account the effects on the environment as well as economic and social viability. Two energy supply scenarios, one with and one without scarcity of oil supply, form the basis of STEPs. Furthermore two different policies are suggested to tackle the problem of scarcity of oil: a technology driven strategy and a demand regulation based strategy. This paper presents the application of these scenarios and strategies to the strategic Systems Dynamics model MARS (Metropolitan Activity Relocation Simulator) covering the metropolitan area of Edinburgh. Scenario indicators like car ownership, fleet composition and fuel resource costs were provided by the European model ASTRA and the world energy market model POLES. The first part of the paper summarises the scenarios and strategies in detail. The second part describes briefly some basics of Systems Dynamics as well as the main mechanisms underlying the model MARS. Finally the results of the scenario simulations are presented. The main outcome is that a demand regulation policy is more effective in reducing the consumption of non-renewable energy resources than a technology driven policy

  19. Development of the core safety regulation technology for the SMART-P

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Nam Zin; Kim, Do Sam; Lee, Kyeong Taek; Park, Young Ryoung; Lee, Gil Soo; Kim, Jong Woon; Yun, Sung Hwan; Lee, Jae Jun; Lee, Myung Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2003-06-15

    As the SMART-P is different from existing general reactors, new regulation technology is required to understand and assess the SMART-P for its regulatory reviews. One of the these technologies is related to the core design analysis. Because the SMART-P used metallic fuels, this study also collects general metallic nuclear fuel data and SMART-P's metallic fuel data from the materials studied by KAERI. The core design methodologies of KWU, ABB-CE, Westinghouse, Studsvik, Scandpower, US NRC and domestic research centers were investigated. Specially, The Hellios lattice core was studied for hexagonal nuclear fuel assembly calculation. Also, the VVER-1000 benchmark problem was analyzed by the PARCS code which has been developed by U.S. NRC. In this study, a AFEN-based computing code KORDAX os developed for the regulatory review of the SMART-P. KORDAX which is a nodal code using AFEN method dose not use transverse integration and this it can give higher accuracy results. Also, Because KORDAX is useful for hexagonal core and uses a method different with the core design code of the SMART-P developed by KAERI, it is judged that KORDAX can be an independent and reliable regulation verification code. In the next year study, HELIOS will be further studied as a core lattice code, and a hexagonal kinetics code which is based on AFEN method will be developed more systematically.

  20. Challenges in safety regulation of R and D activities for advanced technologies in DAE units

    International Nuclear Information System (INIS)

    Shukla, Dinesh Kumar

    2016-01-01

    DAE is engaged in intensive research and developmental activities, especially for advanced technologies such as accelerators, lasers, supercomputers, advanced materials and instrumentation. The starting point of an R and D project might be a hypothesis to be tested, problem to be solved, or the performance of an item to be improved, and there may be many possible solutions and technologies that could be used. R and D is quite different from designing, constructing, operating a plant. In these, precisely described result can be defined from the beginning and can be described in design specifications, process descriptions and procedures. However, while established procedures may be available to begin an R and D project, deviation from these procedures may occur often as a legitimate component of the conduct of R and D. Nevertheless, the R and D activities have to be performed in a manner which provides assurance that safety requirements are adequately addressed. Hence, the regulatory approach for enforcing the safety regulation in such facilities is also not as rigid as those for an operating industry. This paper is aimed to discuss some of the key challenges in regulating such R and D activities and also attempts to suggest a way forward. (author)

  1. Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

    International Nuclear Information System (INIS)

    Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

    2003-01-01

    Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

  2. Proceedings: An international workshop on offshore lease abandonment and platform disposal: Technology, regulation, and environmental effects

    Energy Technology Data Exchange (ETDEWEB)

    Pulsipher, A. [ed.] [Louisiana State Univ., Baton Rouge, LA (United States). Center for Energy Studies

    1997-03-01

    This Proceedings volume includes papers prepared for an international workshop on lease abandonment and offshore platform disposal. The workshop was held April 15, 16, and 17, 1996, in New Orleans, Louisiana. Included in the volume are several plenary speeches and issue papers. prepared by six working groups, who discussed: Abandoning Wells; Abandoning Pipelines; Removing Facilities; Site Clearance; Habitat Management, Maintenance, and Planning; and Regulation and Policy. Also included are an introduction, an afterword (reprinted with the permission of its author, John Lohrenz), and, as Appendix C, the complete report of the National Research Council Marine Boards An Assessment of Techniques for Removing Fixed Offshore Structures, around which much of the discussion at the workshop was organized. Short biographies of many speakers, organizers, and chairpersons are included as Appendix A. Appendix B is a list of conference participants. Selected papers have been processes separately for inclusion in the Energy Science and Technology database.

  3. Interactive, technology-enhanced self-regulated learning tools in healthcare education: a literature review.

    Science.gov (United States)

    Petty, Julia

    2013-01-01

    Learning technology is increasingly being implemented for programmes of blended learning within nurse education. With a growing emphasis on self-directed study particularly in post-basic education, there is a need for learners to be guided in their learning away from practice and limited classroom time. Technology-enabled (TE) tools which engage learners actively can play a part in this. The effectiveness and value of interactive TE learning strategies within healthcare is the focus of this paper. To identify literature that explores the effectiveness of interactive, TE tools on knowledge acquisition and learner satisfaction within healthcare with a view to evaluating their use for post-basic nurse education. A Literature Review was performed focusing on papers exploring the comparative value and perceived benefit of TE tools compared to traditional modes of learning within healthcare. The Databases identified as most suitable due to their relevance to healthcare were accessed through EBSCOhost. Primary, Boolean and advanced searches on key terms were undertaken. Inclusion and exclusion criteria were applied which resulted in a final selection of 11 studies for critique. Analysis of the literature found that knowledge acquisition in most cases was enhanced and measured learner satisfaction was generally positive for interactive, self-regulated TE tools. However, TE education may not suit all learners and this is critiqued in the light of the identified limitations. Interactive self regulation and/or testing can be a valuable learning strategy that can be incorporated into self-directed programmes of study for post-registration learners. Whilst acknowledging the learning styles not suited to such tools, the concurrent use of self-directed TE tools with those learning strategies necessitating a more social presence can work together to support enhancement of knowledge required to deliver rationale for nursing practice. Copyright © 2012 Elsevier Ltd. All rights

  4. Morals or markets? Regulating assisted reproductive technologies as morality or economic policies in the states.

    Science.gov (United States)

    Heidt-Forsythe, Erin

    2017-01-01

    The availability of assisted reproductive technologies (ARTs) in the medical marketplace complicates our understanding of reproductive public policy in the United States. Political debates over ARTs often are based on fundamental moral principles of life, reproduction, and kinship, similar to other reproductive policies in the United States. However, ARTs are an important moneymaking private enterprise for the U.S. biotechnology industry. This project investigates how the U.S. states regulate these unique and challenging technologies as either moral policies or economic policies. This study employs ordinary least squares (OLS) regression to estimate the significance of morality and economic policy variables on ART policies at the state level, noting associations between state-level political, economic, and gender variables on restrictive and permissive state-level ART policies. Economic variables (reflecting the biotechnology industry) and advocacy for access to ART on behalf of infertility patients increase the chances of states passing policies that enable consumer use of ARTs. Additionally, individual ART policies are distinct from one another in the ways that morality variables increase the chances of ART regulations. Surprisingly, the role of religious adherence among state residents varied in positive and negative relationships with individual policy passage. In general, these results support the hypothesis that ART laws are associated with economic as well as moral concerns of the states-ARTs lie at the intersection of issues of life and reproduction and of scientific innovation and health. What is most striking about these results is that they do not follow patterns seen in the legislation of abortion, contraception, and sexuality in general-those reproductive policies that are considered "morality policy." Similarly, economic variables are not consistently significant in the expected direction.

  5. A novel steric effect-regulated isothermal exponential amplification technology for the one-step homogeneous sensing of proteins.

    Science.gov (United States)

    Wu, Wanghua; Pan, Wufan; Yu, Dongdong; Yuan, Zhen; Qin, Yazhou; Lu, Yuxiang; Zhang, Tao; Zhou, Jianguang

    2018-02-12

    A simple and homogeneous technology, the steric effect-regulated isothermal exponential amplification reaction (SER-EXPAR), was developed to sense proteins. By using a small molecule linked DNA nanostructure, termed enzyme-binding hairpin (EBH), the protein-small molecule binding events could be readily sensed by utilizing the steric effect generated between the protein and enzyme. It set free the enzyme to be active again, thus regulating the amplification rate of EXPAR.

  6. Pressure transmitters: Addressing post-Fukushima regulations and requirements with Bibloc technology by Rolls-Royce

    International Nuclear Information System (INIS)

    Fabbro, Herve; Desgeorge, Romain; Chowanek, Michel

    2013-06-01

    Nuclear power stations are designed to withstand substantial seismic activity and as such represent some of the most robust buildings in the world. However The Fukushima nuclear incident highlighted the potential vulnerability of nuclear power plants when multiple natural events of historic proportions happen simultaneously. Following the incident, the worldwide nuclear industry quite rightly called for an immediate review and a targeted reassessment of the safety margins of nuclear reactors. Several recommendations have been given by international safety authorities, including a significant toughening of the already stringent regulations and requirements, with respect to earthquakes, extreme temperatures, pressure and radiation resistance. In the event of an accident, a quick response is imperative and to act efficiently, a correct knowledge of the situation as well as an accurate estimation of its severity are required. Thus, it is essential to be able to rely on the most reliable sensors possible, in particular for the 50 to 100 classified pressure transmitters. Equipment used in nuclear plants all over the world, such pressure transmitters, are implemented following one of two different types of design: - The Monobloc design where almost all the equipment or system is installed very close to the reactor, within the reactor building. - The Bibloc design where the most sensitive parts (in particular the electronics) are removed from the harsh environment present in the vicinity of the reactor to be placed outside of the reactor building. The paper will present the advantages of the Bibloc technology and will show how this technology meets the 'Post Fukushima' requirements. (authors)

  7. Neonatal outcome following new assisted reproductive technology regulations in Turkey - a nationwide multicenter point prevalence study.

    Science.gov (United States)

    Kultursay, Nilgun; Yalaz, Mehmet; Koroglu, Ozge Altun

    2015-01-01

    In March 2010, a new legislation about assisted reproductive technology (ART) activities, favoring single embryo transfer, was introduced in Turkey. Consequences of new regulations on neonatal outcome have not been evaluated in multicenter studies yet. In this study, our aim was to evaluate neonatal outcome of infants from medically assisted reproduction (MAR) pregnancies in the post-legislation era. A point prevalence study was conducted at 51 centers in Turkey on 1 April 2013. Data about fertility treatments and neonatal characteristics were evaluated for "live births" (Group 1) and "patients being cared in the NICU" (Group 2). Seventeen (4%) of 420 infants in group 1, and 89 (8.1%) of 1094 infants in group 2 were born after MAR pregnancies. The ratio of multiple births in MAR pregnancies was still very high as 47.1% for group 1, 69.1% for group 2 infants. MAR babies constituted 9.9% of infants in Level 3 NICUs and 7.6% infants in Level 2 NICUs. MAR was associated with increased risk of multiple births and prematurity. After the new legislation, multiple birth rates are still high in MAR pregnancies, resulting in unfavorable neonatal outcomes. Efforts to decrease multiple birth rates should be encouraged.

  8. A broad look at separator material technology for valve-regulated lead/acid batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zguris, G.C. [Hollingsworth and Vose, West Groton, MA (United States)

    1998-05-18

    Recent research has proved the importance of a constant force of 40 kPa or greater on the paste solidus-grid interface. This has lead to increased interest in re-examining the microglass separator and the system that the plate-separator interaction forms. This renewed interest has resulted in new separator ideas and the revisiting of concepts tried in the early days of valve-regulated lead/acid (VRLA) technology. The paper is divided into two parts. The first part examines some past separator developments that have been tried but are presently not accepted by the general VRLA community. This is due to the excellent performance of the microglass separator used so successfully during the last 20 years. Many fundamental questions that need to be asked regarding the selection of a new separator system have long ago been forgotten. The second part of the paper reviews some fundamental aspects of separator selection, and some important attributes that the separator must provide based on current knowledge of the separator system. Attributes such as toughness, corrosion resistance, compression, wicking, stratification, porosity and conformability are discussed. (orig.)

  9. AGROPHYSICAL ASPECTS OF TECHNOLOGICAL LOAD REGULATION ON SOIL COVER IN THE MODERN AGROLANDSCAPES

    Directory of Open Access Journals (Sweden)

    Barvinskyi A.V.

    2016-05-01

    Full Text Available Modern agricultural landuseof researched Tetiivskyi-Boguslavskyi nature-agricultural district of Kyiv region is characterized by high technological loading on the soil covering, associated with the transformation of lands structure and sowing areas of crops under the influence of market situations. The high level of technological loading on land resources causes the development of degradation processes, and as a result – reduced lands productivity. The main reasons are: unbalanced development of the productive forces and exhausting exploitation of land resources, producers ignoring of environmental imperatives, technical, technological and organizational backwardness of agricultural production; embryonic nature of ecological and economical mechanism of land use and realization of land protection measures, the lack of perfect legal framework of regulating and management of resource- ecological security at national, regional and local levels. Increasing of anthropogeneous pressure on soil (excessive soil tillage in agricultural landscapes, ecologically unsustainable use of agricultural chemicals, high intensity of heavy agricultural machinery, etc. leads to increase of degradation processes almost on the all area of arable land (Medvedev, 1994. So important is the continuous monitoring of agrophysical condition of soils and development of scientific and practical foundations of optimizing the physical parameters of fertility. The environmentally unbalanced application of anthropogeneous factors results in agrophysical degradation of arable lands, what is displaied in top soil overcompaction.Experimentally found that depending on how the agricultural land use equilibrium bulk density of the gray forest soils varies between 1,35-1,58 g/cm3, dark-gray forest soils - 1,36-1,44, podzolized chernozem - 1,26-1,33, typical chernozem- 1,09-1,18 g/cm3, that indicating the imbalance of soil-physical factors, a significant deviation from the requirements of

  10. Technologically enhanced naturally occurring radioactive material (TENORM) and its regulation. Aspects at issue

    International Nuclear Information System (INIS)

    Menon, Shankar

    2001-01-01

    It has been known for quite a long time that mankind lives in a naturally radioactive world. However, it is only during the last decade that it has become generally registered that naturally occurring radioactive material (NORM) is artificially concentrated ('technologically enhanced') in many non- nuclear industries. This concentration, termed TENORM, can be in the products, the by- products or the wastes arising from these industries. The emergence of the NORM/TENORM issue has been of great significance for the discussions on clearance regulations in the nuclear industry. A task group of the OECD/NEA Co-operative Programme on Decommissioning has found that TENORM arisings occur in huge quantities; two to three orders of magnitude larger than those used in European studies on release of material from the nuclear industry. The activity levels in TENORM arisings are generally the same as in very low level nuclear waste. Their occurrence in a large number of industries, as well as their activity levels and quantities, have not been generally known, even to regulatory authorities, until fairly recently. Thus the regulation of TENORM is in its early stages. Ra 226 with a half-life of 1,600 years is by far the most important radionuclide. These data are only shown to give an idea of quantities and activity levels. Other industries with significant radioactive waste streams are petroleum processing, geothermal plants and paper mills. Studies by the European Commission have shown that more or less comparable quantities of TENORM arise in Europe, with similar concentrations of radioactivity. Two of the largest source industries of TENORM are the coal and fertiliser industries. According to UNSCEAR, 280 million tons of coal ash arise globally every year. 40 million tons are used in the production of bricks and cement and 'a great deal' is utilised as road stabiliser, road fill, asphalt mix and fertiliser. Annual doses to residents can be up to several mSv. These doses are

  11. Regulating the unknown: Managing the occupational health risks of nanomedical technologies and nanopharmaceuticals in the research laboratory

    Science.gov (United States)

    Ersin, Ozlem Hacer

    Novel technologies and their resultant products demand fresh ways of thinking about pre-market risk analysis and post-market surveillance. A regulatory framework that is responsive to emerging knowledge about the hazards of novel technologies offers repeatable and transparent processes and remains economically and socially feasible. Workers are an especially vulnerable population who are exposed to unknown hazards of novel technologies and serve often as unwitting sentinels of impending risks. This Grounded Theory-based case study identifies gaps in our current ability to regulate novel technologies so as to minimize occupational health risks and offers necessary modifications for an environment that is conducive to proper regulation. Nanopharmaceuticals and the nano-based technologies at their base are used by way of exemplar technologies that are currently taxing the ability of the regulatory system to provide adequate oversight. Ambiguities of definition, absence of a tracking system (of who is doing nanotechnology research), and the paucity of scientific evidence to support risk management efforts are among the findings of the study and need to be addressed as ameliorative steps toward an effective regulatory structure.

  12. ELECTRONIC FUNDS TRANSFER IN MONEY LAUNDERING CRIME: REGULATION NEEDED IN RESPONSE TO MEETING OF TECHNOLOGY AND CRIME IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Go Lisanawati

    2010-12-01

    Full Text Available Advancements in information technology have affected modern society in numerous areas, including communication, education, commerce, and so on. These advancements have brought incredible benefits; they have also provided opportunities and motivation for various forms of crime. Information technology has also made crime highly profitable. Among the many types of criminal activities, modern technology has allowed money laundering to become an online crime. This new type of crime has raised some legal questions about the capability of national and international regulations in relation to current and upcoming issues. These include finding electronic funds transfer records after the fact, and determining money laundering activity that includes electronic funds transfer. Although Indonesia is an integral member of a community concerned with the interaction between technology and money laundering, it has not provided regulations to deal with the current and upcoming issues involving the crime of electronic money laundering. The increase in the amount of crime indicates the following series of techniques and mechanisms that had been detected in relation to money laundering activity. This research will examine current issues under the light of Indonesian regulations, and will put forward some proposals to close the legal vacuum.

  13. 75 FR 60266 - Federal Acquisition Regulation; Buy American Exemption for Commercial Information Technology...

    Science.gov (United States)

    2010-09-29

    ...). Section 615 authorizes exemption from the Buy American Act for acquisition of information technology that... acquisition of information technology that is a commercial item. This same exemption has appeared every year... applies. ``Information technology'' and ``Commercial item'' are already defined in FAR part 2. This is a...

  14. Self-Regulated Out-of-Class Language Learning with Technology

    Science.gov (United States)

    Lai, Chun; Gu, Mingyue

    2011-01-01

    Current computer-assisted language learning (CALL) research has identified various potentials of technology for language learning. To realize and maximize these potentials, engaging students in self-initiated use of technology for language learning is a must. This study investigated Hong Kong university students' use of technology outside the…

  15. Determining Science Teachers' Levels of Motivation and Self-Regulation Regarding Use of Education Technologies

    Science.gov (United States)

    Efe, Hülya Aslan; Baysal, Yunus Emre

    2017-01-01

    In line with the growing importance of use of education technologies in the field of education, teachers are increasingly expected to use education technologies in class environment and to provide students with appropriate environments and opportunities to use these technologies. This situation makes it necessary to investigate teachers'…

  16. Environmental Regulations, Market Structure and Technological Progress in Renewable Energy Technology — A Panel Data Study on Wind Turbines

    OpenAIRE

    Dirk Rübbelke; Pia Weiss

    2011-01-01

    We study the impact of environmental regulations on the patent activities for wind turbines between 1980 and 2008. We explicitly control for energy market liberalisation and take a potential interaction between liberalisation and policy instruments into account. We find a strong and highly significant effect of environmental tax revenues, which we regard as a proxy for the extent to which energy prices changed in favour of renewable energies, as well as foreign demand for wind turbines on inn...

  17. Systematically reviewing the potential of concept mapping technologies to promote self-regulated learning in primary and secondary science education

    DEFF Research Database (Denmark)

    Stevenson, Matt P.; Hartmeyer, Rikke; Bentsen, Peter

    2017-01-01

    We systematically searched five databases to assess the potential of concept mapping-based technologies to promote self-regulated learning in science education. Our search uncovered 17 relevant studies that investigated seven different types of learning technologies. We performed a narrative....... Computer software was particularly useful for developing cognitive strategies through ease of use. Teaching agents were particularly useful for developing metacognitive strategies by coupling visualisation of knowledge patterns with performance monitoring, aided by a teaching metaphor. Finally, mobile...... devices and teaching agents were most effective in enhancing motivation. Effects on knowledge gains remain unclear due to small sample sizes....

  18. Regulation

    International Nuclear Information System (INIS)

    Ballereau, P.

    1999-01-01

    The different regulations relative to nuclear energy since the first of January 1999 are given here. Two points deserve to be noticed: the decree of the third august 1999 authorizing the national Agency for the radioactive waste management to install and exploit on the commune of Bures (Meuse) an underground laboratory destined to study the deep geological formations where could be stored the radioactive waste. The second point is about the uranium residues and the waste notion. The judgment of the administrative tribunal of Limoges ( 9. july 1998) forbidding the exploitation of a storage installation of depleted uranium considered as final waste and qualifying it as an industrial waste storage facility has been annulled bu the Court of Appeal. It stipulated that, according to the law number 75663 of the 15. july 1965, no criteria below can be applied to depleted uranium: production residue (possibility of an ulterior enrichment), abandonment of a personal property or simple intention to do it ( future use aimed in the authorization request made in the Prefecture). This judgment has devoted the primacy of the waste notion on this one of final waste. (N.C.)

  19. Federal regulation of the pipeline industry: a summary review. [Effects on use of energy-conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-05-31

    The principal purposes of this report are: (1) identification of the jurisdiction areas of the Federal pipeline-regulating agencies, and (2) examination of the amenability of the regulatory system to the introduction of energy-conservative new technology into the pipeline industry. The history, scope, and agency structure of state and Federal regulation are recounted and some gaps, overlaps, and ambiguities are identified. The only significant inhibitory effects upon technological innovation are found to derive from the FPC and ICC limits upon profit, the 1941 Justice Department consent decree limiting dividends to shipper-owned pipelines, and the income tax rules governing recovery of investment credits and startup losses. Effects of these limits are explored by simulation studies using the Systems, Science and Software pipeline economic model (PEM). Two new concepts of regulation are proposed which would neutralize the inhibitory effect of the present regulatory system and would motivate pipeline operators to conserve energy: (1) use of a ''national equivalent value'' in the economic tradeoff analyses which justify entry of a technological innovation into the rate base (valuation), and (2) a ''valuation allowance'' which would reverse the presently often-existing situation and insure that the pipeline operator would realize a greater profit from saving energy than from wasting it.

  20. Could the Pharmaceutical Industry Benefit from Full-Scale Adoption of Radio-Frequency Identification (RFID) Technology with New Regulations?

    Science.gov (United States)

    Coustasse, Alberto; Kimble, Craig A; Stanton, Robert B; Naylor, Mariah

    2016-01-01

    Healthcare regulators are directing attention to the pharmaceutical supply chain with the passage of the Drug Quality and Security Act (DQSA) and the Drug Supply Chain Security Act (DSCSA). Adoption of Radio-Frequency Identification (RFID) technology has the ability to improve compliance, reduce costs, and improve safety in the supply chain but its implementation has been limited; primarily because of hardware and tag costs. The purpose of this research study was to analyze the benefits to the pharmaceutical industry and healthcare system of the adoption of RFID technology as a result of newly implemented supply chain regulations. The methodology was a review following the steps of a systematic review with a total of 96 sources used. With the DSCSA, pharmaceutical companies must track and trace prescription drugs across the supply chain, and RFID can resolve many track-and-trace issues with manufacturer control of data. The practical implication of this study is that pharmaceutical companies must continue to have the potential to increase revenues, decrease associated costs, and increase compliance with new FDA regulations with RFID. Still, challenges related to regulatory statute wording, implementation of two-dimensional barcode technology, and the variety of interfaces within the pharmaceutical supply chain have delayed adoption and its full implementation.

  1. Reproduction in the Genetic Age: A Proposed Scheme for the Regulation of Assisted Reproductive Technologies

    OpenAIRE

    Lindstrom, Laura J.

    2002-01-01

    In the last several years, there have been a number of advances in the area of assisted (or advanced) reproductive technology (ART) that are so fantastic that they strain the credulity of even those well-versed in medicine and science. Moreover, the potential medical, legal, psychological, and social repercussions of the applications of these technologies cause most people who hear about their use to worry somewhat about the ramifications. In fact, part of the general fear of these technologi...

  2. Self-Regulated Learning: A Touchstone for Technology-Enhanced Classrooms

    Science.gov (United States)

    McQuirter Scott, Ruth; Meeussen, Nancy

    2017-01-01

    Technology-enhanced classrooms offer dynamic possibilities for teachers and students. The teacher's role can shift from being an expert in control of the class to being a coach who challenges students to use technology to explore the world and share their findings in innovative ways. Such redefining of roles, however, involves risk and often…

  3. Іnformation and communication technologies and their integration in the teaching process regulations

    Directory of Open Access Journals (Sweden)

    Oksana Chekan

    2017-03-01

    Full Text Available In the article the role and place of ICT in the educational process of modern preschoolinstitutions have been outlined. The ways of integration the ICT into the educational process ofpreschool institutions have been specified. Psychological and educational literature about ICTin upbringing process have been analyzed. Theoretical foundations of information andcommunication technologies and their integration into the educational process of preschoolshave been studied. The key goals and objectives of the problem have been determined. Theterms of use the ICT in the preschools have been grounded. The didactic capabilities ofmultimedia technologies have been verified. Computer games as a factor of child’sdevelopment have been determined.Key words: information technologies, information and communication technologies,information society, computer games, multimedia.

  4. 78 FR 42430 - Revisions to the Export Administration Regulations Based on the 2012 Missile Technology Control...

    Science.gov (United States)

    2013-07-16

    ... that are generally: a. Characterized by high nickel, very low carbon content and use substitutional... the ``development'' of fly-by-wire control systems), 0E521 No. 6 (for ``technology'' for the...

  5. Applying novel technologies and methods to inform the ontology of self-regulation.

    Science.gov (United States)

    Eisenberg, Ian W; Bissett, Patrick G; Canning, Jessica R; Dallery, Jesse; Enkavi, A Zeynep; Whitfield-Gabrieli, Susan; Gonzalez, Oscar; Green, Alan I; Greene, Mary Ann; Kiernan, Michaela; Kim, Sunny Jung; Li, Jamie; Lowe, Michael R; Mazza, Gina L; Metcalf, Stephen A; Onken, Lisa; Parikh, Sadev S; Peters, Ellen; Prochaska, Judith J; Scherer, Emily A; Stoeckel, Luke E; Valente, Matthew J; Wu, Jialing; Xie, Haiyi; MacKinnon, David P; Marsch, Lisa A; Poldrack, Russell A

    2018-02-01

    Self-regulation is a broad construct representing the general ability to recruit cognitive, motivational and emotional resources to achieve long-term goals. This construct has been implicated in a host of health-risk behaviors, and is a promising target for fostering beneficial behavior change. Despite its clear importance, the behavioral, psychological and neural components of self-regulation remain poorly understood, which contributes to theoretical inconsistencies and hinders maximally effective intervention development. We outline a research program that seeks to define a neuropsychological ontology of self-regulation, articulating the cognitive components that compose self-regulation, their relationships, and their associated measurements. The ontology will be informed by two large-scale approaches to assessing individual differences: first purely behaviorally using data collected via Amazon's Mechanical Turk, then coupled with neuroimaging data collected from a separate population. To validate the ontology and demonstrate its utility, we will then use it to contextualize health risk behaviors in two exemplar behavioral groups: overweight/obese adults who binge eat and smokers. After identifying ontological targets that precipitate maladaptive behavior, we will craft interventions that engage these targets. If successful, this work will provide a structured, holistic account of self-regulation in the form of an explicit ontology, which will better clarify the pattern of deficits related to maladaptive health behavior, and provide direction for more effective behavior change interventions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Incentives of carbon dioxide regulation for investment in low-carbon electricity technologies in Texas

    International Nuclear Information System (INIS)

    Castillo, Anya; Linn, Joshua

    2011-01-01

    This paper compares the incentives a carbon dioxide emissions price creates for investment in low carbon dioxide-emitting technologies in the electricity sector. We consider the extent to which operational differences across generation technologies - particularly, nuclear, wind and solar photovoltaic - create differences in the incentives for new investment, which is measured by the operating profits of a potential entrant. First, astylized model of an electricity system demonstrates that the composition of the existing generation system may cause electricity prices to increase by different amounts over time when a carbon dioxide price is imposed. Differences in operation across technologies therefore translate to differences in the operating profits of a potential entrant. Then, a detailed simulation model is used to consider a hypothetical carbon dioxide price of $10-$50 per metric ton for the Electric Reliability Council of Texas (ERCOT) market. The simulations show that, for the range of prices considered, the increase in electricity prices is positively correlated with output from a typical wind unit, but the correlation is much weaker for nuclear and photovoltaic. Consequently, a carbon dioxide price creates much stronger investment incentives for wind than for nuclear or photovoltaic technologies in the Texas market. - Highlights: → Compare incentives for new investment in low-emission electricity technologies created by carbon dioxide price. → Focus on ERCOT power system using stochastic unit commitment model. →Find a greater incentive for wind than solar or nuclear because of correlation between wind generation and increase in electricity prices.

  7. Current products and future plan of regulatory technology R and D for risk-informed regulation and applications

    International Nuclear Information System (INIS)

    Song, K. Y.; Lee, C. J.; Kim, W. S.; Jeong, D. W.; Kim, H. J.

    2002-01-01

    The first phase of a R and D project for risk-informed regulation (RIR) and applications (RIA) has been finished. Various results which would be useful for preparing domestic RIR system were accomplished, in areas of safety goals and general principles of RIR, which provide fundamental bases for establishment of RIR system as well as regulatory review guides, which ensure the quality for PSA. RIA guidelines for ISI, IST, MOV, Tech.-Sepc. also have been developed, implementing some pilot plant applications. As essential documents for actual RIR inspection, risk-informed inspection guides and implementation guide for maintenance effectiveness were prepared. In the second phase of R and D, two projects on RIR area will be performed. One is to study on institutionalization of RIR and performance-based regulation, another is to develop a PSA model for regulatory audit as well as regulatory technology for risk monitoring

  8. THE USE OF CHEMICALS AS PLANT REGULATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 8.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS, THIS MODULE IS SPECIFICALLY CONCERNED WITH CHEMICALS AS PLANT REGULATORS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS INCLUDE -- (1) CHEMICALS AS MODIFIERS OF PLANT GROWTH, (2)…

  9. NOx emission control for gas turbines: A 1991 update on regulations and technology (Part II)

    International Nuclear Information System (INIS)

    Schorr, M.M.

    1991-01-01

    The technologies that are available for the control of NO x emissions from gas turbines utilize the factors that impact the formation of NO x described in the previous section and include (1) diluent injection (i.e., water or steam) into the combustion zone, which is a front-end control technology that lowers the combustor flame temperature, (2) selective catalytic reduction (SCR), which is a back-end exhaust gas cleanup system, (3) dry low NO x combustors (DLN), which use staged combustion and very lean fuel-air mixtures (they are currently being introduced), and (4) catalytic combustion systems that hold the promise of achieving extremely low emission levels without resorting to exhaust gas cleanup. This last option is being developed to burn very lean fuel-air mixtures, but will require significant technological breakthroughs; it is still several years away from becoming commercially available

  10. Regulations on the allocating of subsidies to promote the development of radiation exposure reduction technology for nuclear power facilities

    International Nuclear Information System (INIS)

    1984-01-01

    The regulations provide for subsidies for the research and development of radiation exposure reduction technology for nuclear power facilities and evaluation of the results. The subsidies are for purchase of equipment, materials, etc. and other expendures approved. The contents are as follows: applications for subsidies, determination of subsidy allocations, withdrawal of applications, a report on the work proceedings, a report on the results, confirmation on the sum of the subsidies, payment of subsidies, approval of alterations in the plans, withdrawal of the decision for subsidies, patent rights, payment of the earnings, management of the properties, etc. (Mori, K.)

  11. Regulations on allocating the sums of money regarding of development of radiation exposure reduction technology for nuclear power facilities

    International Nuclear Information System (INIS)

    1984-01-01

    The regulations provide for the sums of money regarding research and development of radiation exposure reduction technology for nuclear power facilities and evaluation of the results. Expenses cover the purchase of equipment, personnel expenditures, travelling expenses, communication, etc. The contents are as follows: the application for subsidy allocations, determination of subsidy allocations, withdrawal of applications, a report on the work proceedings, a report on the results, approval of alterations in the plans, withdrawal of the decision for a subsidy allocation, patent rights, utilization etc. of the results, management of the properties, etc. (Mori, K.)

  12. Governance strategies for living technologies : bridging the gap between stimulating and regulating technoscience

    NARCIS (Netherlands)

    Est, van Q.C.; Stemerding, D.

    2013-01-01

    The life sciences present a politically and ethically sensitive area of technology development. NBIC convergence—the convergence of nanotechnology, biotechnology, and information and cognitive technology—presents an increased interaction between the biological and physical sciences. As a result the

  13. Publication of the safety regulation KTA 3603 of the Committee for Nuclear Technology (KTA)

    International Nuclear Information System (INIS)

    1980-01-01

    The regulation applies to the planning, construction and operation of plants for the treatment of radioactive, contaminated water from stationary nuclear power plants with LWR- and HTR-type reactors. According to the regulation, plants for the treatment of contaminated natur are to be planned, constructed, and operated in such a way that - uncontrolled discharge of contaminated water will be avoided (article 46, paragraph 1, no. 1 StrlSchV), - the activity discharged with water is as low as possible (article 46, paragraph 1, no. 2 StrlSchV), - radioactive contaminated water will not be discharged into the ground, - personnel exposure due to direct radiation, contamination, and inhalation will be as low as possible even below the limiting values fixed in the Radiation Protection Ordinance (article 28, paragraph 1 StrlSchV). Furthermore, discharge of liquid waste into bodies of water requires special permission (articles 2, 3, 7 WHG). (orig./HP) [de

  14. Policies and regulations in Mexico with regard to genetic technology and food security

    OpenAIRE

    Colmenarez Ortiz, Claudia; Ortiz Garcia, Sol

    2016-01-01

    In 1988 the first application for field trials of a GMO was formally received in Mexico. Since then a Biosafety law, few bylaws and national official standards were enacted in order to regulate the safe use of GMOs and to evaluate, control and avoid adverse effects to human health and the environment. The Law on Biosafety of Genetically Modified Organisms was enacted in 2005 in order to comply with international obligations derived from the Cartagena Protocol on Biosafety signed by Mexico in ...

  15. Analysis of technologies and experiences for reducing occupational radiation dose and study for applying to regulations

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Joo Hyun; Park, Moon Soo; Lee, Un Jang; Song, Jae Hyuk; Kim, Byeong Soo; Kim, Chong Uk [Seoul National Univ., Seoul (Korea, Republic of)

    2003-01-15

    To reduce Occupational Radiation Dose (ORD) effectively and enhance the radiological safety, the comprehensive assessment of the experiences to reduce ORD should be made by regulatory body as well as utilities. Hence, the objective of this study is to assess the experiences for reducing ORD from the regulatory viewpoint. With the research objective, the followings are performed in this research; analysis of occupational dose trends at domestic and foreign NPPs, identification of the effective technologies for reducing ORD, examination of the effects of the technologies for reducing ORD, derivation of the regulatory means for implementing he research results. From this study, the regulatory means for effective reduction of ORD are derived. Hence, the results can be utilized as a basic materials for ALARA requirements.

  16. 'Capture ready' regulation of fossil fuel power plants - Betting the UK's carbon emissions on promises of future technology

    International Nuclear Information System (INIS)

    Markusson, Nils; Haszeldine, Stuart

    2010-01-01

    Climate change legislation requires emissions reductions, but the market shows interest in investing in new fossil fuelled power plants. The question is whether capture ready policy can reconcile these interests. The term 'capture ready' has been used a few years by the UK Government when granting licences for fossil fuelled power plants, but only recently has the meaning of the term been defined. The policy has been promoted as a step towards CCS and as an insurance against carbon lock-in. This paper draws on literature on technology lock-in and on regulation of technology undergoing development. Further, versions of the capture readiness concept proposed to date are compared. Capture readiness requirements beyond the minimum criterion of space on the site for capture operations are explored. This includes integration of capture and power plant, downstream operations, overall system integration and regulation of future retrofitting. Capture readiness comes with serious uncertainties and is no guarantee that new-built fossil plants will be abatable or abated in the future. As a regulatory strategy, it has been over-promised in the UK.

  17. Peers, Regulators, and Professions: The Influence of Organizations in Health Information Technology Adoption

    OpenAIRE

    Campion, Thomas R.; Gadd, Cynthia S.

    2010-01-01

    According to the U.S. National Research Council, current health information technology (HIT) efforts are insufficient and arguably detrimental to healthcare transformation. Many hospitals have already implemented HIT, and federal stimulus funding will further adoption efforts. Organizations become more similar through the adoption of innovations like HIT, but the effects of the changes do not necessarily improve efficiency. This view from sociology and organizational studies, called instituti...

  18. Plant Pathology and Information Technology: Opportunity for Management of Disease Outbreak and Applications in Regulation Frameworks

    Directory of Open Access Journals (Sweden)

    Andrea Luvisi

    2016-08-01

    Full Text Available In many European rural areas, agriculture is not only an economic activity, but it is strictly linked to environmental and social characteristics of the area. Thus, sometimes, a pathogen can become a social threat, as in the case of Xylella fastidiosa and olive trees (Olea europaea L. in Salento. Fast and systemic response to threats represents the key to success in stopping pest invasions, and proves a great help in managing lots of data in a short time or coordinating large-scale monitoring coming from applying Information Technology tools. Regarding the field of applications, the advantages provided by new technologies are countless. However, is it the same in agriculture? Electronic identification tools can be applied for plant health management and certification. Treatments, agrochemical management or impact assessment may also be supported by dematerialization of data. Information Technology solution for urban forestry management or traceability of commodities belonging to “Food from Somewhere” regimes were analyzed and compared to protection from pests of a unique tree heritage such as olive trees in Salento.

  19. Environmental policy and technological change: The effects of economic incentives and direct regulation on energy-saving innovation

    Science.gov (United States)

    Newell, Richard G., Jr.

    Over the long run, the impacts of environmental policies will be greatly affected by the influence these policies have on the rate and direction of technological change. In particular, the roles played by energy prices and product regulation in energy-saving technology innovation are exceptionally important considerations in modeling climate change and evaluating alternative policy options. We analyze the effects of energy prices and energy-efficiency regulations on the menu of air conditioner and water heater models available on the market over a period of more than three decades, measuring their innovation in terms of improvements in the products' underlying characteristics. Through estimation of a series of "characteristics transformation surfaces," we find that during less than four decades, substantial innovation in these products reduced the total capital and operating costs of air conditioning by one-half and water heating by more than one-fifth. Although the overall rate of innovation in these products appears to be independent of energy prices and regulations, the evidence suggests that the direction of innovation may be responsive to energy price changes. This would imply that energy price increases induced innovation in a direction that lowered the capital cost tradeoffs inherent in producing more energy-efficient products. The evidence supporting "regulation-induced" changes in these tradeoffs is much weaker. Our estimates indicate that about one- to two-fifths of the energy-efficiency improvements in these products from 1973 to 1993 were associated with historical changes in energy prices. We also find that this responsiveness to price changes increased substantially after product labeling requirements came into effect, and that minimum efficiency standards had a significant positive effect on average efficiency levels. Nonetheless, a sizeable portion of historical efficiency improvements in these technologies is associated with the products' overall

  20. Work, meaning, and gene regulation: Findings from a Japanese information technology firm.

    Science.gov (United States)

    Kitayama, Shinobu; Akutsu, Satoshi; Uchida, Yukiko; Cole, Steve W

    2016-10-01

    The meaning in life, typically reflected in a sense of purpose, growth, or social embeddedness (called eudaimonic well-being, EWB), has been linked to favorable health outcomes. In particular, this experience is inversely associated with the conserved transcriptional response to adversity (CTRA), which involves up-regulation of genes linked to inflammation and down-regulation of genes linked to viral resistance. So far, however, little is known about how this transcriptome profile might be situated in specific socio-cultural contexts. Here, we tested 106 male workers at a large Japanese IT firm and found that the CTRA is inversely associated not only with general EWB but also with a more contextualized sense of meaning derived from the perceived significance of one's work and a sense of interdependence with others in the workplace. These results expand previous links between personal well-being and CTRA gene expression to include the socio-cultural determinants of meaning in life. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Leading research report for fiscal 1998. Research and study of 3-dimensional cell structure module engineering; 1998 nendo sendo chosa kenkyu hokokusho. Sanjigen saibo soshiki module kogaku chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the formation of cellular tissues to replace bionic tissues, researches were conducted about technologies of forming bionic tissue modules by culturing various kinds of cells. As for the materials and methods for constructing cellular tissues, researches were conducted about the trends of research and development of 3-dimensional tissue culturing matrices and materials for micromanipulation. As for the development of technologies for the functionalization of 3-dimensionally structured cells, research and study were conducted about the technology of 3-dimensional cell structure organization through application of physical stimulation, the biochemical technology of differentiation inducing, and the differentiation inducing technology for hetero tissue culturing. As for the development of technologies for evaluation using 3-dimensionally structured cells, light CT (computer tomography), analysis and evaluation using spectroscopy and the like, feasibility of the biochemical analysis of the cell state using biosensors, technologies for measuring the secretion of carcinogenic and toxic substances, etc., were studied. In addition, the development of organic models to replace test animals, industrial evolution of 3-dimensional tissue module engineering, etc., were investigated. (NEDO)

  2. Gene technology regulation in Australia: a decade of a federal implementation of a statutory legal code in a context of constituent states taking divergent positions.

    Science.gov (United States)

    Tribe, David

    2012-01-01

    Gene technology is regulated in Australia by the Office of the Gene Technology Regulator (OGTR), a federal government agency with responsibility for managing health and environmental risks of GM organisms under the Gene Technology Act 2000. The OGTR liaises with other national agencies, governments of States and Territories of Australia and local councils. Current national risk management regulation is the result of three decades of experience with oversight of gene technology. A major operational feature of Australian regulation is reliance on Institutional Biosafety Committees (IBCs) located within the regulated institutions. In 2009-2010 the OGTR managed 45 licenses relating to GM crop field trials, and inspected crop trials that included canola, wheat, barley, banana, sugarcane, cotton, Indian mustard and grapevines. States and Territories of Australia make decisions on market related (non-safety) issues, and adopt different political stances with respect to commercialization of GM crops. Some Australian states support environmental release of licensed GM crops (e.g., Queensland), others ban them (Tasmania), while some have re-positioned themselves, after initially opposing commercialization, to currently allowing regulated commercial use (Victoria, Western Australia). Flexibility exhibited by the Australian regulatory system is facilitated by separation of political decision-making in the Gene Technology Ministerial Council away from the OGTR.

  3. Carbamazepine as a Possible Anthropogenic Marker in Water: Occurrences, Toxicological Effects, Regulations and Removal by Wastewater Treatment Technologies

    Directory of Open Access Journals (Sweden)

    Faisal I. Hai

    2018-01-01

    Full Text Available Carbamazepine (CBZ, a pharmaceutical compound, has been proposed as an anthropogenic marker to assess water quality due to its persistence in conventional treatment plants and widespread presence in water bodies. This paper presents a comprehensive literature review on sources and occurrences of CBZ in water bodies, as well as toxicological effects and regulations of the drug. Given the documented side effects of CBZ on the human body when taken medicinally, its careful monitoring in water is recommended. CBZ residues in drinking water may provide a pathway to embryos and infants via intrauterine exposure or breast-feeding, which may cause congenital malformations and/or neurodevelopmental problems over long term exposure. An in-depth technical assessment of the conventional and advanced treatment technologies revealed the inadequacy of the standalone technologies. Compared to conventional activated sludge and membrane bioreactor processes, effective removal of CBZ can be achieved by nanofiltration and reverse osmosis membranes. However, recent studies have revealed that harsh chemical cleaning, as required to mitigate membrane fouling, can often reduce the long-term removal efficiency. Furthermore, despite the efficient performance of activated carbon adsorption and advanced oxidation processes, a few challenges such as cost of chemicals and regeneration of activated carbon need to be carefully considered. The limitations of the individual technologies point to the advantages of combined and hybrid systems, namely, membrane bioreactor coupled with nanofiltration, adsorption or advanced oxidation process.

  4. Qualification of class 1e equipment: regulation, technological margins and test experience

    International Nuclear Information System (INIS)

    Pasco, Y.; Le Meur, M.; Henry, J.Y.; Droger, J.P.; Morange, E.; Roubault, J.

    1986-10-01

    French regulation requires licensee to qualify electrical equipment important to safety for service in nuclear power plants to ensure that the equipment can perform its safety function under the set of plausible operating conditions. The French regulatory texts entitled Fundamental safety rules have classified safety related electrical equipment in three main categories: k1, k2, k3, according to their location and operating conditions. The definition of a design basis accident test profile must account for margins applied to thermal hydraulic code outputs. Specific safety margins was added to cover uncertainties in qualification test representativity. Up to now, accidental sequence studies have shown the validity of such a qualification test profile. On the other hand, the results from post accident simulation tests have shown that it is useful not only to validate post accident operating life but also to reveal failures initiated during previous tests [fr

  5. Assessment of regulations set up under public law concerning questions of safety technology

    International Nuclear Information System (INIS)

    Steiff, A.; Althaus, W.; Dietz, B.; Gross, H.J.; Stasiczek, M.; Salzwedel, J.; Reinhardt, M.

    1992-02-01

    A goal of the preliminary study was to assess the need for a data-processing system, to analyze the goals of such a system, to conceptualize it and examine possibilities for implementing it and to do a cost-benefit analysis of it. It serves as a means of assistance for - licensing and supervisory authorities, - the manufacturers and operators of plants, - the control institutions, - the communes, the governments of the Laender and the federal government, - trade associations and professional associations, - employers' organizations and employees' organizations in their efforts to solve problems and carry out tasks regarding safety technology. Such problems arise during the planning, construction, operation, alteration, closure and removal of plants as well as during the transport and storing of materials and goods. (orig./DG) [de

  6. Municipalities as facilitators, regulators and energy consumers for enhancing the dissemination of biogas technology in Denmark

    Directory of Open Access Journals (Sweden)

    Rikke Lybæk

    2015-06-01

    Full Text Available Biogas provides many potential benefits as far as renewable energy production, environmental protection and job creation etc. Insufficient initiatives from government/municipalities however hamper more biogas plants to be established, and hence that the large manure potential, and other types of digestible organic waste materials, are being utilized for energy purposes. By looking at municipalities as energy consumer’s, that constitutes a local market for biogas, as regulator’s, enforcing new requirements and regulations on the biogas sector, and finally as facilitator’s, assisting and helping involved stakeholders, the development of the biogas sector could be enhanced. We suggest to: Slim the documentation needed; Require that a part of the municipal heat are provided by biogas; Identify alternative heat markets for sale of non-upgraded biogas; Map new types of gas boosters, etc. We conclude that the role of municipalities as facilitator’s is the most important support that local governments can provide to support biogas.

  7. Frequency Regulation Strategies in Grid Integrated Offshore Wind Turbines via VSC-HVDC Technology: A Review

    Directory of Open Access Journals (Sweden)

    Jafar Jallad

    2017-08-01

    Full Text Available The inclusion of wind energy in a power system network is currently seeing a significant increase. However, this inclusion has resulted in degradation of the inertia response, which in turn seriously affects the stability of the power system’s frequency. This problem can be solved by using an active power reserve to stabilize the frequency within an allowable limit in the event of a sudden load increment or the loss of generators. Active power reserves can be utilized via three approaches: (1 de-loading method (pitching or over-speeding by a variable speed wind turbine (VSWT; (2 stored energy in the capacitors of voltage source converter-high voltage direct current (VSC-HVDC transmission; and (3 coordination of frequency regulation between the offshore wind farms and the VSC-HVDC transmission. This paper reviews the solutions that can be used to overcome problems related to the frequency stability of grid- integrated offshore wind turbines. It also details the permanent magnet synchronous generator (PMSG with full-scale back to back (B2B converters, its corresponding control strategies, and a typical VSC-HVDC system with an associated control system. The control methods, both on the levels of a wind turbine and the VSC-HVDC system that participate in a system’s primary frequency control and emulation inertia, are discussed.

  8. European accomplishments in regulation of the family status of the child conceived by artificial reproduction technologies

    Directory of Open Access Journals (Sweden)

    Kovaček-Stanić Gordana

    2015-01-01

    Full Text Available In this paper, the author analyzes family status of the child conceived by artificial reproduction technologies using the following treatments: homologues artificial insemination, heterologus artificial insemination (artificial insemination by donor, ovum donation, embryo donation and surrogate motherhood. One specific situation of homologues artificial insemination is posthumous insemination, insemination after the death of the husband/partner. This procedure is allowed in, for instance, United Kingdom, but not allowed in France, Switzerland, and Italy. Considering genetics elements in this situation there is no doubt on fatherhood - father is a man whose sperm is used for insemination, regardless of the fact if frozen sperm or frozen embryo is used in the procedure. Nevertheless, until 2008 in United Kingdom, the husband/partner was not considered as legal father, because of the fact that the child was born after his death. Heterologous artificial insemination could be used in three different situations. First, when subjects are spouses or unmarried partners of different sexes. Second, when subjects are spouses or unmarried partners of the same sex and the third if a single woman is an only subject. Most recent procedure is the one in which subjects are spouses or unmarried partners of the same sex, specifically two women. This procedure is allowed in the United Kingdom and Sweden. In these legislatures, there is a rule that the woman who delivers the child is legal mother, and her spouse/partner is a second parent of the child. The most recent procedure of egg donation is a donation of only a part of an egg, mitochondrial DNA. In this case, there are in fact three genetic parents of the child: two genetic mothers and a father. Legally, the child has one mother (the woman who delivers a child and a father. One of potential outcomes of the recent research is the ability to create human embryo without any male genetic contribution - by

  9. Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 3: technological innovation, renewable sources and rural energization

    International Nuclear Information System (INIS)

    1999-01-01

    These proceedings cover the papers presented in the 8. Brazilian congress on energy held at Rio de Janeiro from November, 30 to December, 02, 1999, focusing energy policy, regulation and sustainable development, specifically the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; renewable energy sources and rural areas energy supply

  10. Software-Related Recalls of Health Information Technology and Other Medical Devices: Implications for FDA Regulation of Digital Health.

    Science.gov (United States)

    Ronquillo, Jay G; Zuckerman, Diana M

    2017-09-01

    Policy Points: Medical software has become an increasingly critical component of health care, yet the regulation of these devices is inconsistent and controversial. No studies of medical devices and software assess the impact on patient safety of the FDA's current regulatory safeguards and new legislative changes to those standards. Our analysis quantifies the impact of software problems in regulated medical devices and indicates that current regulations are necessary but not sufficient for ensuring patient safety by identifying and eliminating dangerous defects in software currently on the market. New legislative changes will further deregulate health IT, reducing safeguards that facilitate the reporting and timely recall of flawed medical software that could harm patients. Medical software has become an increasingly critical component of health care, yet the regulatory landscape for digital health is inconsistent and controversial. To understand which policies might best protect patients, we examined the impact of the US Food and Drug Administration's (FDA's) regulatory safeguards on software-related technologies in recent years and the implications for newly passed legislative changes in regulatory policy. Using FDA databases, we identified all medical devices that were recalled from 2011 through 2015 primarily because of software defects. We counted all software-related recalls for each FDA risk category and evaluated each high-risk and moderate-risk recall of electronic medical records to determine the manufacturer, device classification, submission type, number of units, and product details. A total of 627 software devices (1.4 million units) were subject to recalls, with 12 of these devices (190,596 units) subject to the highest-risk recalls. Eleven of the devices recalled as high risk had entered the market through the FDA review process that does not require evidence of safety or effectiveness, and one device was completely exempt from regulatory review

  11. A Case Study on the Impacts of Connective Technology on Self-Efficacy and Self-Regulated Learning of Female Adult Students Managing Work-Life Balance

    Science.gov (United States)

    Sheetz, Tracey L.

    2014-01-01

    Adults frequently define their lives as "hectic" and "overextended;" yet, many make the decision to return to school and add the role of student into their busy lives. This research study explored and explained the impact of connective technology on self-efficacy and self-regulated learning of female adult students balancing…

  12. 'Not so wrong that we are prepared to threaten the entire service': the regulation of reproductive technologies in the UK.

    Science.gov (United States)

    Levitt, M

    2001-01-01

    In the UK human embryo research and infertility treatments are regulated by the Human Fertilisation and Embryology Authority (HFEA), a national statutory body set up in 1991. Clinics are required by law to be licensed by the HFEA and open to inspection. In 1999 there were 107 clinics licensed to carry out IVF and/or donor insemination. There are regional variations in National Health Service funding and seventy-five percent of those treated pay for most of their treatment, usually to avoid long waiting lists or because they do not meet the eligibility criteria set by their local health authority. Having described the code of practice laid down by the HFEA the paper discusses the implications of new reproductive technologies from a social science perspective, focusing on three topics which continue to be debated by the media, the regulatory authorities, health professionals and 'lay' people. First, age limits and other criteria for assisted reproduction which raise the question 'who should be allowed to reproduce?' Second, donor anonymity and the question of payment for donors. Finally, the screening and selection of embryos for implantation and the recurring theme in the media of 'designer babies'. The HFEA can be seen to fulfill its intended role, mediating between the infertility professionals, patients and the wider general public. It seeks to allay public fears while supporting professionals by avoiding restrictions on research and treatment and by consulting with the public as to when extensions to research will be acceptable.

  13. The 'Risk' of Implementing New Regulations on Game-Changing Technology: Sequestering CO2 in the Built Environment.

    Science.gov (United States)

    Constantz, B.

    2009-05-01

    , the value produced combined with available carbon credits makes this CCC technology economically and environmentally sustainable. Calera has a pilot plant and laboratory operating at Moss Landing, CA, within the Monterey Bay Marine Sanctuary. During operation, the Calera process draws in seawater, which is combined with a variety of natural and manufactured minerals held in liquid suspension. Flue gas from the neighboring power plant is then sparged through the liquid. The process may also be enhanced by supplementing the water with additional minerals. These minerals are then separated from the seawater and are further processed to produce cement or other building materials. After the seawater flows through the Calera process, additional flue gas is sparged through the water to restore the native bicarbonate buffer levels and pH to match the pH of the incoming seawater, and within the prescribed limits. The outflow will be largely unchanged, with the exception of being calcium and magnesium depleted. One of the biggest hurdles Calera faces today is gaining support for this new technology. Most of the state and federal regulatory agencies are very familiar with geologic sequestration, and consequently most of the legislative language is geared towards supporting this form of carbon capture. For example, when a Request for Proposal comes out from the Department of Energy it often limits applicants to some form of geologic sequestration activity. This scenario is true for grant funding, loans and tax credits. Calera is spending a considerable amount of time and effort to open these opportunities up to all forms of carbon capture. An overview of the process along with the risk involved in changing regulations will be presented.

  14. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  15. Regulations of 10 January 1989 relating to the implementation of control of the export of strategic goods, services and technology, laid down by the ministry of foreign affairs

    International Nuclear Information System (INIS)

    1989-01-01

    These Regulations were made by the Ministry of Foreign Affairs in pursuance of Act No. 93 of 18 December 1987 on the control of the export of strategic goods, services and technology, in particular nuclear material, equipment, technology and services. The Regulations entered into force on 15 February 1989. That Ministry compiles lists of goods requiring an export licence or permission which also cover nuclear installations, material and equipment. The Regulations provide that the Ministry may require that an application for export of such goods, etc. be accompanied by a statement on the final use of the goods concerned (end-use statement) ascertaining that they will not be re-exported without the consent of the Norwegian authorities [fr

  16. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  17. Compatibility of technologies with regulations in the waste management of H-3, I-129, C-14, and Kr-85. Part I. Initial information base

    International Nuclear Information System (INIS)

    Trevorrow, L.E.; Vandegrift, G.F.; Kolba, V.M.; Steindler, M.J.

    1983-08-01

    This report summarizes the information base that was collected and reviewed in preparation for carrying out an analysis of the compatibility with regulations of waste management technologies for disposal of H-3, I-129, C-14, and Kr-85. Based on the review of this literature, summaries are presented here of waste-form characteristics, packaging, transportation, and disposal methods. Also discussed are regulations that might apply to all operations involved in disposal of the four nuclides, including the processing of irradiated fuel in a fuel reprocessing plant, packaging, storage, transport, and final disposal. The compliance assessment derived from this information is reported in a separate document. 309 references

  18. Regulation of membrane protein function by lipid bilayer elasticity—a single molecule technology to measure the bilayer properties experienced by an embedded protein

    DEFF Research Database (Denmark)

    Lundbæk, Jens August

    2008-01-01

    , regulate a number of structurally unrelated proteins in an apparently non-specific manner. It is well known that changes in the physical properties of a lipid bilayer (e.g., thickness or monolayer spontaneous curvature) can affect the function of an embedded protein. However, the role of such changes......-dependent sodium channels, N-type calcium channels and GABAA receptors, it has been shown that membrane protein function in living cells can be regulated by amphiphile induced changes in bilayer elasticity. Using the gramicidin channel as a molecular force transducer, a nanotechnology to measure the elastic...... properties experienced by an embedded protein has been developed. A theoretical and technological framework, to study the regulation of membrane protein function by lipid bilayer elasticity, has been established....

  19. Asynchronous interaction, online technologies self-efficacy and self-regulated learning as predictors of academic achievement in an online class

    Science.gov (United States)

    McGhee, Rosie M. Hector

    This research is a correlational study of the relationship among the independent variables: asynchronous interaction, online technologies self-efficacy, and self-regulated learning, and the dependent variable; academic achievement. This study involves an online computer literacy course at a local community college. Very little research exists on the relationship among asynchronous interaction, online technologies self-efficacy and self-regulated learning on predicting academic achievement in an online class. Liu (2008), in his study on student interaction in online courses, concluded that student interaction is a complex issue that needs more research to increase our understanding as it relates to distance education. The purpose of this study was to examine the relationships between asynchronous interaction, online technologies self-efficacy, self-regulated learning and academic achievement in an online computer literacy class at a community college. The researcher used quantitative methods to obtain and analyze data on the relationships among the variables during the summer 2010 semester. Forty-five community college students completed three web-based self-reporting instruments: (a) the GVU 10th WWW User Survey Questionnaire, (b) the Online Technologies Self-Efficacy Survey, and (c) selected items from the Motivated Strategies for Learning Questionnaire. Additional data was obtained from asynchronous discussions posted on Blackboard(TM) Learning Management System. The results of this study found that there were statistically significant relationships between asynchronous interaction and academic achievement (r = .55, p online technologies self-efficacy and academic achievement (r = .50, p online instructors, online course designers, faculty, students and others who are concerned about predictors for online students' success. Also, it serves as a foundation for future research and provides valuable information for educators interested in taking online teaching and

  20. Ceramics adsorbing virus and cells. Uirusu, saibo bunri ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Hiraide, T. (Asahi Optical Co. Ltd., Tokyo (Japan))

    1993-07-01

    It has been reported that hydroxyapatite (HA), which is the main inorganic component of teeth and bones of homo sapiens and used for biomaterials such as artificial tooth roots, adsorbs viruses such as influenza viruses. In this article, the history of development up to now of HA and its adsorption mechanism of protein, virus, etc., are introduced. HA was applied for chromatography in 1956 becoming one of the separating and refining methods of protein and nucleic acid, then after the development of spherical porous HA, it has become applied for high speed liquid chromatography (HPLC). Also by means of a column filled with HA granules, T-cells have been able to be purified in a short time from lymphocyte which was separated from the blood of homo sapiens. Recently it has also been reported that HA granules can adsorb influenza viruses, Japanese encephalitis viruses, polio viruses and hepatitis B viruses, and a cold-preventative mask based upon this report is now on sale. 11 refs., 7 figs.

  1. Adapting to extreme events related to natural variability and climate change: the imperative of coupling technology with strong regulation and governance.

    Science.gov (United States)

    Kythreotis, A P; Mercer, T G; Frostick, L E

    2013-09-03

    In recent years there has been an increase in extreme events related to natural variability (such as earthquakes, tsunamis and hurricanes) and climate change (such as flooding and more extreme weather). Developing innovative technologies is crucial in making society more resilient to such events. However, little emphasis has been placed on the role of human decision-making in maximizing the positive impacts of technological developments. This is exacerbated by the lack of appropriate adaptation options and the privatization of existing infrastructure, which can leave people exposed to increasing risk. This work examines the need for more robust government regulation and legislation to complement developments and innovations in technology in order to protect communities against such extreme events.

  2. Regulating technological change - The strategic reactions of utility companies towards subsidy policies in the German, Spanish and UK electricity markets

    International Nuclear Information System (INIS)

    Stenzel, Till; Frenzel, Alexander

    2008-01-01

    This paper focuses on how incumbent electric utilities strategically react to subsidy schemes supporting renewable energy technologies in the UK, Germany, and Spain. Firms coordinate the development of their technological capabilities and their political activities to shape their regulatory environment. Analysing the diffusion of wind power in these countries, we show that the different ways, in which firms coordinate their technological and political strategies, lead to very different market outcomes, both for the firms' market share and the size of the overall market. Although incumbents are usually seen as being resistant to change in energy systems, we show that Spanish utilities proactively drive the diffusion of wind power. We speculate about the relation between the ownership structure of the energy system and its inertia with respect to the integration of new technologies. We derive novel policy implications that explicitly take into account the strategic actions of incumbent firms shaping the technological and regulatory system

  3. On the Use of Energy Storage Technologies for Regulation Services in Electric Power Systems with Significant Penetration of Wind Energy

    DEFF Research Database (Denmark)

    Yang, Bo; Makarov, Yuri; Desteese, John

    2008-01-01

    Energy produced by intermittent renewable resources is sharply increasing in the United States. At high penetration levels, volatility of wind power production could cause additional problems for the power system balancing functions such as regulation. This paper reports some partial results...... and frequently changing regulation signal. Several energy storage options have been analyzed based on thirteen selection criteria. The evaluation process resulted in the selection of flywheels, pumped hydro electric power (or conventional hydro electric power) plant and sodium sulfur or nickel cadmium batteries...... of a project work, recently conducted by the Pacific Northwest National Laboratory (PNNL) for Bonneville Power Administration (BPA). The project proposes to mitigate additional intermittency with the help of Wide Area Energy Management System (WAEMS) that would provide a two-way simultaneous regulation service...

  4. Innovation in energy networks. A study on the changing relation between regulation, technology and market in liberalized energy markets

    International Nuclear Information System (INIS)

    Kuenneke, R.W.; Bouwmans, I.; Kling, W.L.; Slootweg, J.G.; Stout, H.D.; De Vries, L.J.; Van Poelje, H.; Wolters, M.

    2001-10-01

    The purpose of this study is to contribute to the development a view on the future of the energy infrastructure for the next 10-15 years, including the related regulation, focusing on the strategic options for development of networks. Attention is paid to (1) planning concepts (to what extent should existing planning concepts be revised as a result of liberalization and technical innovation); and (2) positioning of networks (what are the consequences of the separation of energy markets in commercial and regulated sectors for the development of the energy sector) [nl

  5. Regulation of membrane protein function by lipid bilayer elasticity-a single molecule technology to measure the bilayer properties experienced by an embedded protein

    International Nuclear Information System (INIS)

    Lundbaek, Jens August

    2006-01-01

    Membrane protein function is generally regulated by the molecular composition of the host lipid bilayer. The underlying mechanisms have long remained enigmatic. Some cases involve specific molecular interactions, but very often lipids and other amphiphiles, which are adsorbed to lipid bilayers, regulate a number of structurally unrelated proteins in an apparently non-specific manner. It is well known that changes in the physical properties of a lipid bilayer (e.g., thickness or monolayer spontaneous curvature) can affect the function of an embedded protein. However, the role of such changes, in the general regulation of membrane protein function, is unclear. This is to a large extent due to lack of a generally accepted framework in which to understand the many observations. The present review summarizes studies which have demonstrated that the hydrophobic interactions between a membrane protein and the host lipid bilayer provide an energetic coupling, whereby protein function can be regulated by the bilayer elasticity. The feasibility of this 'hydrophobic coupling mechanism' has been demonstrated using the gramicidin channel, a model membrane protein, in planar lipid bilayers. Using voltage-dependent sodium channels, N-type calcium channels and GABA A receptors, it has been shown that membrane protein function in living cells can be regulated by amphiphile induced changes in bilayer elasticity. Using the gramicidin channel as a molecular force transducer, a nanotechnology to measure the elastic properties experienced by an embedded protein has been developed. A theoretical and technological framework, to study the regulation of membrane protein function by lipid bilayer elasticity, has been established

  6. The trilogy nuclear technology-quality-reliability in nuclear energy: the interface technical regulation/industrial norm in the nuclear industry

    International Nuclear Information System (INIS)

    Costa, Jose Ribeiro da

    1995-01-01

    In this paper, it is tried to find out a compatibility among Regulations (mandatory) documents governing Quality Assurance Requirements for the Nuclear Industry (like IAEA/50-C-QA, IAEA/50-SG-QA1, IAEA/50-SG-QA7, and others), with similar documents prescribing same requirements for COnventional Industry (like ISO/900 Series), using the technical support of the prescriptions contained in the IAEA/TR-328 documents. Harmonization and compatibility of these documents is a great deal for Industries engaged -directly or indirectly - in the Nuclear Technology, taking into account that such compatibility can avoid troubles for already ISO/9000 Series Certified Industries in the fulfillment of its contract requirements in the nuclear field. Its also represents in that field a symbiosis between Technical Regulations (mandatory) and Voluntary Standards (Industrial, Consensual Standards). (author). 7 refs., 1 fig., 1 tab

  7. Food traceability systems in China: The current status of and future perspectives on food supply chain databases, legal support, and technological research and support for food safety regulation.

    Science.gov (United States)

    Tang, Qi; Li, Jiajia; Sun, Mei; Lv, Jun; Gai, Ruoyan; Mei, Lin; Xu, Lingzhong

    2015-02-01

    Over the past few decades, the field of food security has witnessed numerous problems and incidents that have garnered public attention. Given this serious situation, the food traceability system (FTS) has become part of the expanding food safety continuum to reduce the risk of food safety problems. This article reviews a great deal of the related literature and results from previous studies of FTS to corroborate this contention. This article describes the development and benefits of FTS in developed countries like the United States of America (USA), Japan, and some European countries. Problems with existing FTS in China are noted, including a lack of a complete database, inadequate laws and regulations, and lagging technological research into FTS. This article puts forward several suggestions for the future, including improvement of information websites, clarification of regulatory responsibilities, and promotion of technological research.

  8. RNA Interference Based Approach to Down Regulate Osmoregulators of Whitefly (Bemisia tabaci): Potential Technology for the Control of Whitefly

    Science.gov (United States)

    Over the past decade RNA interference (RNAi) technology has emerged as a successful tool not only for functional genomics, but in planta expression of short interfering RNAs (siRNAs) could offer potential for insect pest management. Insects feeding exclusively on plant sap depend on osmotic pressure...

  9. The Interaction of Pedagogical Approach, Gender, Self-Regulation, and Goal Orientation Using Student Response System Technology

    Science.gov (United States)

    Edens, Kellah M.

    2008-01-01

    This research compares a behaviorally based approach for using electronic student response system (SRS) technology with a metacognitive-oriented approach to determine effects on attendance, preparation for class, and achievement. Also examined are the interaction effects of pedagogical approach with self-regulatory and motivational characteristics…

  10. Survey of regulations accompanied with isolation technology of carbon dioxide; Nisanka tanso no kakuri gijutsu ni tomonau hokisei no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Regulations, conventions and agreements relating to the discharging liquefied carbon dioxide (CO2) into the bathypelagic zone from a cruising ships are investigated. The ocean storage of CO2 is not specifically prohibited by law, but must be regulated on a global scale because such treatment may impact the marine environment. In principle, treatment with impact on the nature is prohibited. Laws of environmental conservation are completed in European, Asian, and Pacific countries, which join international conventions and committees with high interests. It is suggested that the engineering technique of the storage should be improved to observe regulations and that an impact assessment for the ocean storage should be carefully conducted in full understanding of the basic premise of the regulatory systems or organizations. Furthermore, it is significant to study on the possible effect of the ocean storage of CO2 on global warming and life-cycle assessment inventory analysis, namely the balance of the energy budget between the separation and the ocean storage of CO2. 23 refs., 7 figs., 6 tabs.

  11. Building automation - terms, guidelines, norms. Regulations for a recent technology; Gebaeudeautomation - Begriffe, Richtlinien, Normen. Regelwerke einer jungen Technik

    Energy Technology Data Exchange (ETDEWEB)

    Kranz, H.R. [Siemens AG, Karlsruhe (Germany)

    1995-12-31

    In chapter 22 of the anthology about building control the field of building automation with respect to terms, guidelines and norms is described. The following aspects are discussed: digital building automation ranging from the technology to the company, functions as basics of building automation, normative basics of technical building systems, overview of relevant norms in the field of heating, ventilation, climate, contract procedure for building works and supplies, standardisation of building cabling, standardisation ``electric system technology for houses and buildings``. (BWI) [Deutsch] Kapitel 22 des Sammelbandes ueber Building Control ist dem Themenbereich der Gebaeudeautomation vor dem Hintergrund der Begriffe, Richtlinien und Normen gewidmet. In diesem Zusammenhang werden folgende Themen angesprochen: Digitale GA - von der Technologie zum Gewerk; Funktionen als Grundlage der Gebaeudeautomation; Nomenklatur digitaler Gebaeudeautomation; Normative Grundlagen Technischer Gebaeudesysteme; Uebersicht ueber relevante Normen im HLK-Bereich; Verbingungsordnung fuer Bauleistungen; Normung der Gebaeudeverkabelung; Normung `Elektrische Systemtechnik fuer Heim und Gebaeude`. (BWI)

  12. Effect of regulation on the rate of adoption of cost saving scale technology in the electric utility industry: a portfolio approach

    International Nuclear Information System (INIS)

    Scheraga, C.A.

    1984-01-01

    This study presents a new analytical framework for examining the relationship between regulation and the investment behavior of electric utilities. The particular kind of investment behavior considered is the adoption of new as well as innovative electrical generation technology. The technologies of interest are large scale coal and nuclear generation plants. The theoretical model used in this study differs from traditional approaches in its utilization of a behavioral framework of analysis. The responsiveness of utilities to the required rate of return demanded by stockholders is demonstrated using an augmented form of the standard Capital Asset Pricing Model. Regulation is viewed as affecting utility investment behavior through the effect of the actions of regulatory commissions on the required rate of return that utilities must earn on equity. The particular regulatory policies considered are modification of existing rate structure, automatic adjustment clauses, and required efficiency standards. These policies are of particular interest both because their effects have not been previously examined in detail, and because they are recommended for adoption in the Public Utility Regulatory Policies Act of 1978. It is demonstrated empirically that the above policies do affect the required rate of return for utilities and hence their innovative investment behavior

  13. Rasch measurement of self-regulated learning in an information and communication technology (ICT)-rich environment.

    Science.gov (United States)

    Njiru, Joseph N; Waugh, Russell F

    2007-01-01

    This report describes how a linear scale of self-regulated learning in an ICT-rich environment was created by analysing student data using the Rasch measurement model. A person convenience sample of (N = 409) university students in Western Australia was used. The stem-item sample was initially 41, answered in two perspectives ("I aim for this" and "I actually do this"), and reduced to 16 that fitted the measurement model to form a unidimensional scale. Items for motivation (extrinsic rewards, intrinsic rewards, and social rewards), academic goals (fear of performing poorly) (but not standards), self-learning beliefs (ability and interest), task management (strategies and time management) (but not cooperative learning), Volition (action control (but not environmental control), and self-evaluation (cognitive self-evaluation and metacognition) fitted the measurement model. The proportion of observed variance considered true was 0.90. A new instrument is proposed to handle the conceptually valid but non-fitting items. Characteristics of high self-regulated learners are measured.

  14. Development of Well-Balanced Regulation in the Sphere of Innovative Financial Technologies for Digitalization of the Common Measure of Value

    Directory of Open Access Journals (Sweden)

    Kotlyarevskyy Yaroslav V.

    2017-11-01

    Full Text Available The article focuses on the modern financial technologies in the sphere of monetary and credit circulation, in particular, the ontology of so-called virtual currencies is investigated, theoretical, methodological and practical aspects of their implementation are defined both in the retrospective and in modern contexts. Along with the analysis of theoretical developments of domestic and foreign scholars, a comparative analysis of the international financial and economic issues of establishing effective regulation was conducted, the main provisions for further improving the coordination of the monetary, financial and economic policies in the mentioned sphere with regard to aspects of sustainable development, institutional economy, tax policy and counteracting the money laundering have been expounded.

  15. The Italian regulation on Assisted Reproductive Technologies facing the European Court of Human Rights: the case of Costa and Pavan v. Italy.

    Science.gov (United States)

    Penasa, Simone

    2012-01-01

    This article will describe the current legal framework on Assisted Reproduction Technology (ART) regulation in Italy, taking into account recent case-law derived from the implementation of the Law 40 of 2004 on ART. Special attention will be devoted to the case of Costa and Pavan v. Italy, recently decided by the Tenth Session of the European Court of Human Rights (ECtHR). In that decision, the European Court declared the incompatibility of the ban to pre-implantation genetic diagnosis introduced by the abovementioned Italian law on ART. The case will be analysed from a dual perspective. On the one hand, it will be considered in the light of the ECtHR case-law, in order to derive systematic aspects of continuity or discontinuity between the former and the latter2. On the other hand, the case will be considered in the light of its concrete and prospective impact on the Italian legal approach to ART regulation, considering especially the direct and indirect influence of the case: e.g., its possible utilisation by Italian judges when they are called upon to implement Law 40.

  16. ALDO: A radiation-tolerant, low-noise, adjustable low drop-out linear regulator in 0.35 μm CMOS technology

    International Nuclear Information System (INIS)

    Carniti, P.; Cassina, L.; Gotti, C.; Maino, M.; Pessina, G.

    2016-01-01

    In this work we present ALDO, an adjustable low drop-out linear regulator designed in AMS 0.35 μm CMOS technology. It is specifically tailored for use in the upgraded LHCb RICH detector in order to improve the power supply noise for the front end readout chip (CLARO). ALDO is designed with radiation-tolerant solutions such as an all-MOS band-gap voltage reference and layout techniques aiming to make it able to operate in harsh environments like High Energy Physics accelerators. It is capable of driving up to 200 mA while keeping an adequate power supply filtering capability in a very wide frequency range from 10 Hz up to 100 MHz. This property allows us to suppress the noise and high frequency spikes that could be generated by a DC/DC regulator, for example. ALDO also shows a very low noise of 11.6 μV RMS in the same frequency range. Its output is protected with over-current and short detection circuits for a safe integration in tightly packed environments. Design solutions and measurements of the first prototype are presented.

  17. ALDO: A radiation-tolerant, low-noise, adjustable low drop-out linear regulator in 0.35 μm CMOS technology

    Energy Technology Data Exchange (ETDEWEB)

    Carniti, P., E-mail: paolo.carniti@mib.infn.it [INFN, Sezione di Milano Bicocca, I-20126 Milano (Italy); Dipartimento di Fisica, Università di Milano Bicocca, I-20126 Milano (Italy); Cassina, L.; Gotti, C.; Maino, M.; Pessina, G. [INFN, Sezione di Milano Bicocca, I-20126 Milano (Italy); Dipartimento di Fisica, Università di Milano Bicocca, I-20126 Milano (Italy)

    2016-07-11

    In this work we present ALDO, an adjustable low drop-out linear regulator designed in AMS 0.35 μm CMOS technology. It is specifically tailored for use in the upgraded LHCb RICH detector in order to improve the power supply noise for the front end readout chip (CLARO). ALDO is designed with radiation-tolerant solutions such as an all-MOS band-gap voltage reference and layout techniques aiming to make it able to operate in harsh environments like High Energy Physics accelerators. It is capable of driving up to 200 mA while keeping an adequate power supply filtering capability in a very wide frequency range from 10 Hz up to 100 MHz. This property allows us to suppress the noise and high frequency spikes that could be generated by a DC/DC regulator, for example. ALDO also shows a very low noise of 11.6 μV RMS in the same frequency range. Its output is protected with over-current and short detection circuits for a safe integration in tightly packed environments. Design solutions and measurements of the first prototype are presented.

  18. ALDO: A radiation-tolerant, low-noise, adjustable low drop-out linear regulator in 0.35 μm CMOS technology

    Science.gov (United States)

    Carniti, P.; Cassina, L.; Gotti, C.; Maino, M.; Pessina, G.

    2016-07-01

    In this work we present ALDO, an adjustable low drop-out linear regulator designed in AMS 0.35 μm CMOS technology. It is specifically tailored for use in the upgraded LHCb RICH detector in order to improve the power supply noise for the front end readout chip (CLARO). ALDO is designed with radiation-tolerant solutions such as an all-MOS band-gap voltage reference and layout techniques aiming to make it able to operate in harsh environments like High Energy Physics accelerators. It is capable of driving up to 200 mA while keeping an adequate power supply filtering capability in a very wide frequency range from 10 Hz up to 100 MHz. This property allows us to suppress the noise and high frequency spikes that could be generated by a DC/DC regulator, for example. ALDO also shows a very low noise of 11.6 μV RMS in the same frequency range. Its output is protected with over-current and short detection circuits for a safe integration in tightly packed environments. Design solutions and measurements of the first prototype are presented.

  19. Technological innovation and environmental regulation at the petroleum refining industry: the Paulinia refinery case; Inovacao tecnologica e regulacao ambiental na industria de refino de petroleo: o caso da Refinaria de Paulinia

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Adalberto Mantovani Martiniano de; Pereira, Newton Mueller [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Inst. de Geociencias. Dept. de Politica Cientifica e Tecnologica]. E-mails: adalba@ige.unicamp.br; newpe@ige.unicamp.br

    2006-07-01

    This article discusses the influence of environmental regulation on the adoption of new production techniques and on the improvement of existing techniques in the refining petroleum industry, namely at the Paulinia refinery (REPLAN). Describes the techniques adopted in order to fit refining processes into the regulation about environmental impacts (related to the protection of resources like water, air and soil), and also techniques adopted in order to produce less pollutant diesel and gasoline. This article has support on bibliographic research and data collected in REPLAN and CENPES, which permit characterize technologies adopted in REPLAN at the end of the 90s and the regulatory rules that drive them. The regulation is presented under an evolutionary approach, considering that technology develops along whit the socio-economic context, the environmental regulation is a related element which determines the search and selection of technologies able to comply with regulation ensuring economic viability. Regulation is also a determinant factor for the adoption of innovations in the refining industry. Specifically in REPLAN, the environmental regulation has required large investments in order to comply processes and products with the established standards. (author)

  20. Translating Scientific Judgment, Technological Insight and Economic Theory Into Practical Policy Lessons: The Case of Climate Regulation in the United States

    Science.gov (United States)

    Mignone, B. K.

    2008-12-01

    Effective solutions to the climate change problem will require unprecedented cooperation across space, continuity across time and coordination between disciplines. One well-known methodology for synthesizing the lessons of physical science, energy engineering and economics is integrated assessment. Typically, integrated assessment models use scientific and technological relationships as physical constraints in a larger macroeconomic optimization that is designed to either balance the costs and benefits of climate change mitigation or find the least-cost path to an exogenously prescribed endpoint (e.g. atmospheric CO2 stabilization). The usefulness of these models depends to a large extent on the quality of the assumptions and the relevance of the outcome metrics chosen by the user. In this study, I show how a scientifically-based emissions reduction scenario can be combined with engineering-based assumptions about the energy system (e.g. estimates of the marginal cost premium of carbon-free technology) to yield insights about the price path of CO2 under a future regulatory regime. I then show how this outcome metric (carbon price) relates to key decisions about the design of a future cap-and-trade system and the way in which future carbon markets may be regulated.

  1. Procedures and Criteria for the regulation of innovative non-medicinal technologies into the benefit catalogue of solidly financed health care insurances

    Directory of Open Access Journals (Sweden)

    Hagen, Anja

    2007-01-01

    Full Text Available Because great interest in an efficient range of effective medicinal innovations and achievements has arisen, many countries have introduced procedures to regulate the adoption of innovative non-medicinal technologies into the benefit catalogue of solidly financed health care insurances. With this as a background, this report will describe procedures for the adoption of innovative non-medicinal technologies by solidly financed health care insurances in Germany, England, Australia and Switzerland. This report was commissioned by the German Agency for Health Technology Assessment at the German Institute for Medical Documentation and Information.In order to find the relevant literature and information, systematic literature research, a hand search and a written survey were carried out. All the selected documents (chosen according to defined criteria for inclusion and exclusion were qualitatively evaluated, summarized and presented on a chart using a framework developed for this purpose. All the countries in this report require that some innovative non-medicinal technologies undergo evaluation by a central governing body. This evaluation is a prerequisite for adoption into the benefit catalogue. The process of evaluation can differ (e. g. the people and institutions concerned, the division of the synthesis of evidence and overall evaluation, processing the evidence. Similarities do exist, such as the size and composition of the governing bodies or the overreaching criteria according to which institutions must make their recommendations. This is how all the countries examined in this report determine how the benefits and effectiveness of the innovations, as well as their cost-effectiveness, can be chosen as criteria for the evaluation. Furthermore, there are many criteria which differ from country to country (social and ethical aspects, possible effects on the health system, etc. and which are also relevant to an evaluation. The preferred types of

  2. Technology round and management of technology

    International Nuclear Information System (INIS)

    Park, Yong Tae

    1994-04-01

    This book deals with beginning of technology round with background of it, change of scientific technique paradigm with economy, management and policy, change of international political environment globalization of technical and economic environment, formation of strategic alliance, intensifying regionalism, new GATT system, UR and technology round, new international technique regulation and technology round of OECD, feature and meaning of technology round, assignment and scientific technique of Korea, past and present of scientific technology in Korea, correspondence for technology round.

  3. Micro-hybrid electric vehicle application of valve-regulated lead-acid batteries in absorbent glass mat technology: Testing a partial-state-of-charge operation strategy

    Energy Technology Data Exchange (ETDEWEB)

    Schaeck, S.; Stoermer, A.O.; Hockgeiger, E. [BMW Group, Powertrain Development, Energy Storage, Hufelandstrasse 4, 80788 Muenchen (Germany)

    2009-05-01

    The BMW Group has launched two micro-hybrid functions in high volume models in order to contribute to reduction of fuel consumption in modern passenger cars. Both the brake energy regeneration (BER) and the auto-start-stop function (ASSF) are based on the conventional 14 V vehicle electrical system and current series components with only little modifications. An intelligent control algorithm of the alternator enables recuperative charging in braking and coasting phases, known as BER. By switching off the internal combustion engine at a vehicle standstill the idling fuel consumption is effectively reduced by ASSF. By reason of economy and package a lead-acid battery is used as electrochemical energy storage device. The BMW Group assembles valve-regulated lead-acid (VRLA) batteries in absorbent glass mat (AGM) technology in the micro-hybrid electrical power system since special challenges arise for the batteries. By field data analysis a lower average state-of-charge (SOC) due to partial state-of-charge (PSOC) operation and a higher cycling rate due to BER and ASSF are confirmed in this article. Similar to a design of experiment (DOE) like method we present a long-term lab investigation. Two types of 90 Ah VRLA AGM batteries are operated with a test bench profile that simulates the micro-hybrid vehicle electrical system under varying conditions. The main attention of this lab testing is focused on capacity loss and charge acceptance over cycle life. These effects are put into context with periodically refresh charging the batteries in order to prevent accelerated battery aging due to hard sulfation. We demonstrate the positive effect of refresh chargings concerning preservation of battery charge acceptance. Furthermore, we observe moderate capacity loss over 90 full cycles both at 25 C and at 3 C battery temperature. (author)

  4. Micro-hybrid electric vehicle application of valve-regulated lead-acid batteries in absorbent glass mat technology: Testing a partial-state-of-charge operation strategy

    Science.gov (United States)

    Schaeck, S.; Stoermer, A. O.; Hockgeiger, E.

    The BMW Group has launched two micro-hybrid functions in high volume models in order to contribute to reduction of fuel consumption in modern passenger cars. Both the brake energy regeneration (BER) and the auto-start-stop function (ASSF) are based on the conventional 14 V vehicle electrical system and current series components with only little modifications. An intelligent control algorithm of the alternator enables recuperative charging in braking and coasting phases, known as BER. By switching off the internal combustion engine at a vehicle standstill the idling fuel consumption is effectively reduced by ASSF. By reason of economy and package a lead-acid battery is used as electrochemical energy storage device. The BMW Group assembles valve-regulated lead-acid (VRLA) batteries in absorbent glass mat (AGM) technology in the micro-hybrid electrical power system since special challenges arise for the batteries. By field data analysis a lower average state-of-charge (SOC) due to partial state-of-charge (PSOC) operation and a higher cycling rate due to BER and ASSF are confirmed in this article. Similar to a design of experiment (DOE) like method we present a long-term lab investigation. Two types of 90 Ah VRLA AGM batteries are operated with a test bench profile that simulates the micro-hybrid vehicle electrical system under varying conditions. The main attention of this lab testing is focused on capacity loss and charge acceptance over cycle life. These effects are put into context with periodically refresh charging the batteries in order to prevent accelerated battery aging due to hard sulfation. We demonstrate the positive effect of refresh chargings concerning preservation of battery charge acceptance. Furthermore, we observe moderate capacity loss over 90 full cycles both at 25 °C and at 3 °C battery temperature.

  5. Regulating the Regulator

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-26

    The article reports on a challenge to the UK electricity regulator to defend his record by the Coalition for Fair Electricity Regulation (COFFER). The challenge centres on whether the obligation for the regional electric companies (REC) to purchase power from the cheapest source is being enforced. This is related to the wider issue of whether the REC's support of combined-cycle gas turbine (CCGT) is economic. COFFER considers that uneconomic gas-fired power plants are being allowed to displace economic coal-fired stations. Aspects discussed include the background to the dispute and the costs of CCGT and coal fired power generation. 1 fig., 1 tab.

  6. Self-Regulated Learning: The Continuous-Change Conceptual Framework and a Vision of New Paradigm, Technology System, and Pedagogical Support

    Science.gov (United States)

    Huh, Yeol; Reigeluth, Charles M.

    2017-01-01

    A modified conceptual framework called the Continuous-Change Framework for self-regulated learning (SRL) is presented. Common elements and limitations among the past frameworks are discussed in relation to the modified conceptual framework. The iterative nature of the goal setting process and overarching presence of self-efficacy and motivational…

  7. REGULATION OF INSTANTANEOUS POWER OUTPUT VALUE IN MAGNETRON WITH CONTINUOUS GENERATION MODE (M-105-, M-112-TYPES BEING PART OF PLASMA TECHNOLOGICAL UNIT

    Directory of Open Access Journals (Sweden)

    S. V. Bordusov

    2010-01-01

    Full Text Available The paper presents results of investigations pertaining to the possibility of regulating instantaneous power output  in a magnetron of M-105 (M-112-type by changing the capacity value of a capacitor in structure diagram for doubling voltage of high-voltage power supply on the basis of a step-up transformer operating in the saturation regime.

  8. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  9. Smart regulation of rural electricity grids. Modern communications technology reduces the voltage fluctuations and regulates the storage of surplus electricity; Laendliches Stromnetz smart geregelt. Moderne Kommunikationstechnik reduziert Spannungsschwankungen und regelt die Speicherung ueberschuessigen Stroms

    Energy Technology Data Exchange (ETDEWEB)

    Durst, Anna

    2012-07-01

    In the ''Smart Country'' model project, researchers in Bitburg- Pruem were testing out the distribution network of the future. It is designed to respond flexibly to the increasingly decentralised generation of renewable electricity in the grid. For this purpose various operating resources were further developed: an optimised biogas plant, which controls the electricity supplied by the grid, virtually stores surplus electricity with an efficiency of 98 %. In addition, voltage regulators double the usable output capacity in the grid. The Eifel project successfully passed the field test after around one year. (orig.)

  10. Market, Regulation, Market, Regulation

    DEFF Research Database (Denmark)

    Frankel, Christian; Galland, Jean-Pierre

    2015-01-01

    barriers to trade in Europe, realized the free movement of products by organizing progressively several orders of markets and regulation. Based on historical and institutional documents, on technical publications, and on interviews, this article relates how the European Commission and the Member States had......This paper focuses on the European Regulatory system which was settled both for opening the Single Market for products and ensuring the consumers' safety. It claims that the New Approach and Standardization, and the Global Approach to conformity assessment, which suppressed the last technical...... alternatively recourse to markets and to regulations, at the three main levels of the New Approach Directives implementation. The article focuses also more specifically on the Medical Devices sector, not only because this New Approach sector has long been controversial in Europe, and has recently been concerned...

  11. A pilot investigation of the potential for incorporating lifelog technology into executive function rehabilitation for enhanced transfer of self-regulation skills to everyday life

    OpenAIRE

    Cuberos-Urbano, Gustavo; Caracuel, Alfonso; Valls-Serrano, Carlos; Garcia-Mochon, Letitia; Gracey, Fergus; Verdejo-Garcia, Antonio

    2018-01-01

    The objective of the study was to identify the potential target and effect size of goal management training (GMT) enhanced with life-logging technology compared with standard GMT on a range of possible primary outcomes reflecting cognitive and ecological aspects of executive functioning and quality of life. Sixteen patients with acquired brain injury involving executive dysfunction were randomly allocated to one of the two interventions: seven weeks of GMT (n = 8), or seven weeks of GMT+Lifel...

  12. Biopoder & regulação da tecnologia: o caráter normativo da análise de risco dos OGMs Bio-power & technology regulation: the normative character of GMO risk analysis

    Directory of Open Access Journals (Sweden)

    Victor Pelaez

    2004-12-01

    Full Text Available Este artigo analisa a regulação da tecnologia como um processo de disputa de poder através do qual o caráter de neutralidade do conhecimento científico é adotado como uma instância legitimadora das agências reguladoras. Utiliza-se como estudo de caso o processo de disputa na regulação dos organismos geneticamente modificados a partir de dois princípios fundamentais: o Princípio de Equivalência Substancial, adotado pelos EUA; e o Princípio de Precaução, adotado pelos países da União Européia.This paper analyses the regulation of technology as a process of power dispute through which the character of neutrality of scientific knowledge is adopted as a legitimising factor of regulating bodies. The dispute for the regulation of genetically modified organisms is taken as a case study from two fundamental principles: the Principle of Substantial Equivalence adopted by the USA; and the Precautionary Principle adopted by European Union Countries.

  13. Compatibility of technologies with regulations in the waste management of H-3, I-129, C-14, and Kr-85. Part II. Analysis

    International Nuclear Information System (INIS)

    Trevorrow, L.E.; Kolba, V.M.; Vandegrift, G.F.; Steindler, M.J.

    1983-11-01

    Waste forms of 3 H, 129 I, 14 C, and 85 Kr separated from fuel reprocessing streams and procedures for managing them were analyzed regarding compliance with regulations. Transportation of these wastes in certain DOT-specification packagings would be permissible, but some of these packagings may not be acceptable in some disposal situations. Transportation of gaseous 85 Kr in a currently certified cylinder is possible, but a fuel reprocessor may wish to ship larger quantities per package. Disposal of tritium using a package designed by a DOE contractor and shallow land burial, in accord with the regulations of 10 CFR 61, seems practicable. Although 10 CFR 61 permits shallow land burial of 129 I, the concentration limit requires distribution in a volume that may seem impractical to commercial fuel reprocessors. The concentration limit of 10 CFR 61 for shallow land burial of 14 C requires distribution in a lesser, although still large, volume. For both 129 I and 14 C, management as high-level waste offers the advantage of smaller volumes. Similar advantages may be offered by greater confinement or non-near surface concepts for disposal. The concrete waste forms developed for these nuclides may not meet technical criteria being formulated for geologic disposal. The lack of accommodation of 85 Kr at disposal facilities makes storage of the gaseous form at the fuel reprocessing plant, followed by dispersal after partial decay, seem attractive. Ocean disposal of 129 I and 14 C by the rules of the International Atomic Energy Agency-London Ocean Dumping Convention offers advantages over shallow land burial: higher allowed concentrations, resulting in smaller volumes and fewer packages. These rules, however, thwart ocean disposal of 85 Kr since gaseous forms are banned, and for solid forms, concentration limits would require distribution of radioactivity in very large volumes. 80 references

  14. 'Emotional rights', moral reasoning, and Jewish-Arab alliances in the regulation of in-vitro-fertilization in israel: theorizing the unexpected consequences of assisted reproductive technologies.

    Science.gov (United States)

    Gooldin, Sigal

    2013-04-01

    Consumption rates of assisted reproductive technologies (ARTs) in Israel is internationally unprecedented, a phenomenon that has been the subject of growing anthropological and sociological attention. Explanations for the singular extent of ARTs use in Israel tend to pre-assume and conceptually prioritize the symbolic and political power of pro-natalist discourses, Jewish religious values, and the demographic interests of the Jewish state. This article attempts to understand the exceptional usage of IVF in Israel in terms of its emergent meanings and unexpected effects in a particular local setup. The question that this article tries to answer is: How is the 'Israeli character' of IVF emerges within and through the interactive practice of moral justifications, and how might this medical technology affect the networks within which it is enmeshed? The article is based on a case-study analysis of a public dispute that took place in 2003-2004 over the extent of public funding for fertility treatments. Ethnographic analysis of parliament discussions, media coverage, and an online forum of IVF consumers recorded three frames of justification for the uniquely generous public funding scheme of IVF in Israel: 'rational-economic', 'nationalist', and 'liberal'. The latter assumes shared 'emotional vulnerability' of all 'childless' Israelis, Jews and Arabs alike and advocates a universal language of 'emotional rights' and 'human rights'. This liberal framing of IVF, which is the most persuasive justification in the dispute, blurs dichotomous rivalries between Jews and Arabs and generates a potential for alliances between traditionally rival sectors. These are some of the unexpected and non-intuitive consequences of ARTs in Israel. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Inhibition of expression in Escherichia coli of a virulence regulator MglB of Francisella tularensis using external guide sequence technology.

    Directory of Open Access Journals (Sweden)

    Gaoping Xiao

    Full Text Available External guide sequences (EGSs have successfully been used to inhibit expression of target genes at the post-transcriptional level in both prokaryotes and eukaryotes. We previously reported that EGS accessible and cleavable sites in the target RNAs can rapidly be identified by screening random EGS (rEGS libraries. Here the method of screening rEGS libraries and a partial RNase T1 digestion assay were used to identify sites accessible to EGSs in the mRNA of a global virulence regulator MglB from Francisella tularensis, a Gram-negative pathogenic bacterium. Specific EGSs were subsequently designed and their activities in terms of the cleavage of mglB mRNA by RNase P were tested in vitro and in vivo. EGS73, EGS148, and EGS155 in both stem and M1 EGS constructs induced mglB mRNA cleavage in vitro. Expression of stem EGS73 and EGS155 in Escherichia coli resulted in significant reduction of the mglB mRNA level coded for the F. tularensis mglB gene inserted in those cells.

  16. A pilot investigation of the potential for incorporating lifelog technology into executive function rehabilitation for enhanced transfer of self-regulation skills to everyday life.

    Science.gov (United States)

    Cuberos-Urbano, Gustavo; Caracuel, Alfonso; Valls-Serrano, Carlos; García-Mochón, Leticia; Gracey, Fergus; Verdejo-García, Antonio

    2018-06-01

    The objective of the study was to identify the potential target and effect size of goal management training (GMT) enhanced with life-logging technology compared with standard GMT on a range of possible primary outcomes reflecting cognitive and ecological aspects of executive functioning and quality of life. Sixteen patients with acquired brain injury involving executive dysfunction were randomly allocated to one of the two interventions: seven weeks of GMT (n = 8), or seven weeks of GMT+Lifelog (n = 8). Outcome measures included a battery of executive function tests, the Dysexecutive Questionnaire (DEX) and the Quality of Life after Brain Injury scale (QOLIBRI), measured pre- and post-interventions. Within-group changes were assessed with related-samples t-tests and estimation of effect sizes. GMT+Lifelog was associated with significant changes, of medium to large effect size, in response inhibition (Stroop), multitasking (Strategy Application and Multiple Errand tests), DEX Intentionality and Positive Affect subscales and QOLIBRI Daily Life and Autonomy, subscales. GMT alone was associated with significant changes of overall quality of life. It was concluded that GMT+Lifelog holds promise to optimise the impact of GMT on executive dysfunction and quality of life.

  17. Is self-regulation possible

    International Nuclear Information System (INIS)

    Barkenbus, J.N.

    1983-01-01

    The Nuclear Regulatory Commission's increasingly prescriptive regulation of the nuclear industry can have deleterious effects, perhaps the most serious being the shift in responsibility for safety from the utility to the NRC. Several factors account for this type of regulation including the nature and structure of the nuclear industry, public opinion and bureaucratic incentives, and the nature of the technology itself. The opportunities to create heightened industry self-regulation (performance-based regulation) deserve further examination. The key to self-regulation is to structure incentives so that it is clearly within the nuclear utilities' interests to build and operate nuclear power facilities in the safest manner possible. 27 references

  18. Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 3: technological innovation, renewable sources and rural energization; Anais do 8. Congresso brasileiro de energia: politica energetica, regulamentacao e desenvolvimento sustentavel. v. 3: inovacao tecnologica, fontes renovaveis e energizacao rural

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    These proceedings cover the papers presented in the 8. Brazilian congress on energy held at Rio de Janeiro from November, 30 to December, 02, 1999, focusing energy policy, regulation and sustainable development, specifically the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; renewable energy sources and rural areas energy supply.

  19. Radiation regulation

    International Nuclear Information System (INIS)

    Braithwaite, J.; Grabosky, P.

    1985-01-01

    The five main areas of radiation regulation considered are radiation exposure in the mining of uranium and other minerals, exposure in the use of uranium in nuclear reactors, risks in the transport of radioactive materials and hazards associated with the disposal of used materials. In Australia these problems are regulated by mines departments, the Australian Atomic Energy Commission and radiation control branches in state health departments. Each of these instutional areas of regulation is examined

  20. Mars Technology Program Planetary Protection Technology Development

    Science.gov (United States)

    Lin, Ying

    2006-01-01

    The objectives of the NASA Planetary Protection program are to preserve biological and organic conditions of solar-system bodies for future scientific exploration and to protect the Earth from potential hazardous extraterrestrial contamination. As the exploration of solar system continues, NASA remains committed to the implementation of planetary protection policy and regulations. To fulfill this commitment, the Mars Technology Program (MTP) has invested in a portfolio of tasks for developing necessary technologies to meet planetary protection requirements for the next decade missions.

  1. Reguladores vegetais e qualidade tecnológica da cana-de-açúcar em meio de safra Growth regulators and technological quality of sugarcane in the middle of the cropping season

    Directory of Open Access Journals (Sweden)

    Glauber Henrique Pereira Leite

    2008-12-01

    Full Text Available A maturação da cana-de-açúcar (Saccharum officinarum L. refere-se a um dos aspectos fundamentais para o sistema de produção da indústria sucroalcooleira. Objetivou-se, neste trabalho, avaliar a qualidade tecnológica da cana-de-açúcar em função da aplicação de reguladores vegetais em meio de safra. O delineamento experimental utilizado foi o de blocos casualizados com cinco repetições, sendo os tratamentos constituídos da aplicação de quatro maturadores da classe dos retardantes de crescimento (Ethefon, Etil-trinexapac, KNO3 e KNO3 + Boro e uma testemunha (maturação natural. A eficiência agronômica dos maturadores foi influenciada pela época de aplicação, pela condição climática e pela característica genética da variedade. A aplicação dos maturadores em 10/05/2004 permitiu explorar de forma significativa o potencial genético da variedade quanto ao acúmulo de sacarose nos colmos, implicando em melhoria na qualidade tecnológica da matéria-prima. A adoção dessa prática em 04/08/2005, de modo geral, pouco afetou os parâmetros tecnológicos, exceto a aplicação de Etil-trinexapac, o qual induziu melhoria significativa na qualidade da matéria-prima. A produtividade de açúcar refletiu-se de forma direta na margem de contribuição agrícola, sendo constatado maior retorno econômico para as plantas tratadas com KNO3 na safra 2004.The ripening of sugarcane (Saccharum officinarum L. is the most important aspect in the production system for sugar and alcohol industry. The objective of this work was to evaluate the technological quality of sugarcane as a function of plant regulators application in the middle of the cropping season. The experiment was carried out in a randomized block design with five replications. The treatments consisted of four plant regulators application of the class of growth retainers (Ethephon, Ethyl.trinexapac, Potassium nitrate and Potassium nitrate + Boron and a control (natural

  2. Citizenship, Collaborative Technologies and Regulation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Canada-Latin America and Caribbean Zika Virus Research Program. A new funding opportunity on Zika virus is responding to the virus outbreak and the health threat it represents for the affected populations in the hardest hit countries in Latin America and the... View moreCanada-Latin America and Caribbean Zika Virus ...

  3. 48 CFR 970.2770 - Technology Transfer.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technology Transfer. 970.2770 Section 970.2770 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Patents, Data, and Copyrights 970.2770 Technology Transfer. ...

  4. Regulative environmental policy. Regulative Umweltpolitik

    Energy Technology Data Exchange (ETDEWEB)

    Goerlitz, A; Voigt, R [Universitaet der Bundeswehr Muenchen, Neubiberg (Germany, F.R.). Fakultaet fuer Sozialwissenschaften; eds.

    1991-01-01

    Regulative policy means those governmental attempts to steer the course of things which can fall back on a certain repertoire of instruments for actions in order to warrant the causal and temporal connection between the making available and the employment of means. The fact that environmental protection needs regulative policy is substantiated by the thesis that the market has failed; consequently only government can manage the public goods 'environment' in a suitable way, and it is a matter of fact that environmental protection at present is operated preferably via regulative policy. The problems of regulative enviromental policy are manifold. Its implementation often miscarries because of limited administrative resources on the one hand - making sufficient control impossible for instance -, and because of poor quality regulative instruments on the other hand. One way out would be to increase the efficiency of regulative policy by sophisticating judicial techniques. Other ways out point to the executing level and aim at improving implementation strategies or are concerned with post-regulative law. The latter refers to a new legal quality which demonstrates itself already in corporatistical crisis regulation or in induction programs such as pollution limits. A final way out favours deregulation strategies which includes the introduction of environmental levies or the allocation of environmental licences. An interdisciplinary discourse is to find out what would happen if these ways were taken. Pointers to solutions from varying scientific disciplines resulting from this discourse are to be found in this volume. (orig./HSCH).

  5. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  6. 48 CFR 27.204 - Patented technology under trade agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patented technology under trade agreements. 27.204 Section 27.204 Federal Acquisition Regulations System FEDERAL ACQUISITION... Patented technology under trade agreements. ...

  7. biosafety regulations

    African Journals Online (AJOL)

    Modern biotechnology will provide important tools for developing countries seeking to gain benefits from ..... several conferences in Latin America that have difficulties in successful transfer of the technology .... innovation in biotechnology.

  8. Emerging and Disruptive Technologies.

    Science.gov (United States)

    Kricka, Larry J

    2016-08-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages.

  9. NORM regulations

    Energy Technology Data Exchange (ETDEWEB)

    Gray, P. [ed.

    1997-02-01

    The author reviews the question of regulation for naturally occuring radioactive material (NORM), and the factors that have made this a more prominent concern today. Past practices have been very relaxed, and have often involved very poor records, the involvment of contractors, and the disposition of contaminated equipment back into commercial service. The rationale behind the establishment of regulations is to provide worker protection, to exempt low risk materials, to aid in scrap recycling, to provide direction for remediation and to examine disposal options. The author reviews existing regulations at federal and state levels, impending legislation, and touches on the issue of site remediation and potential liabilities affecting the release of sites contaminated by NORM.

  10. 從科技匯流到管制匯流 ― 論NCC成立後的通訊傳播監理政策 From the Convergence of Technologies to the Convergence of Regulations: Reviews of NCC Policies

    Directory of Open Access Journals (Sweden)

    簡維克 Wei-Ke Chien

    2007-11-01

    Full Text Available 原先電信產業與廣電產業分立的管制模式在因應數位匯流後也必須配合產業為一定之調整,以避免管制機關間之決策不一致。隨著國家通訊傳播委員會(NCC)於2006 年2 月22 日的成立,我國通訊傳播法制正嘗試性地走出傳統電信法、廣電法二元管制的窠臼,在市場匯流、服務匯流的指引下,進而希望達成管制匯流的終極目標。本文將簡述NCC 成立一年半以來,重大的通訊傳播政策以及對於其近日公布的「通訊傳播管理法」草案提出一些摘要性的評析。 In the past, DGT (the Directorate General of Telecommunications and GIO (Government Information Office, the two regulatory agencies, had governed telecommunications and mass electronic media policies in Taiwan respectively. However, with the development of IP technology and the convergence of communications services from time to time, there is a strong need from relevant industries to establish a new regulatory agency to cope with all the disputing issues in telecommunications and mass electronic media fields, in order to reduce the inconsistencies of regulation philosophy between DGT and GIO. In this case, the new national regulatory agency, National Communications Commission (NCC had been established in February 22, 2007. Not surprisingly, the Commission has to deal with many complicated and disputing issues of communications field from the very beginning, likes announcing the copper pair lines of last mile being bottleneck facility, or transforming the MOD service provided by CHT originally defined as a cable TV service to one kind of telecommunications service. In these policy-making processes, NCC not only utilizes the relevant laws and regulations at present, it also integrates the idea of future digital convergence trends in to these policies. Nevertheless, due to lack of professional financial knowledge in NCC, it seems that some policies on the price

  11. Development of National Technology Audit Policy

    Directory of Open Access Journals (Sweden)

    Subiyanto Subiyanto

    2017-07-01

    Full Text Available The Laws have mandated implementation of technology audit, nevertheless such implementation needs an additional policy that is more technical. The concept of national audit technology policy shall make technology audit as a tool to ensure the benefit of technology application for society and technology advance for nation independency. This article discusses on technology audit policy concept especially infrastructure requirement, with emphasis on regulation, implementation tools, and related institution. The development of technology audit policy for national interest requires provision of mandatory audit implementation, accompanied by tools for developing technology auditor’s competence and technology audit institutional’s mechanism. To guide technology auditor’s competence, concept of national audit technology policy shall classify object of technology audit into product technology, production technology, and management of technology, accompanied by related parameters of technology performance evaluation.

  12. Fisheries regulation

    DEFF Research Database (Denmark)

    Jensen, Frank; Frost, Hans Staby; Abildtrup, Jens

    2017-01-01

    Economists normally claim that a stock externality arises within fisheries because each individual fisherman does not take the effect on stock size into account when making harvest decisions. Due to the stock externality, it is commonly argued that fisheries regulation is necessary, but regulatory...... decisions are complicated by a tremendous amount of uncertainty and asymmetric information. This paper provides an overview of selected parts of the literature on the regulation of fisheries under uncertainty and asymmetric information, and possible areas for future research are identified. Specifically...

  13. French regulations

    International Nuclear Information System (INIS)

    Ballereau, P.

    1998-01-01

    In this issue are given the new French regulations relative to radiation protection of temporary personnel, the licensing to release gaseous and liquid wastes and the licensing granted to thirty two laboratories using beta and gamma decay radioisotopes. (N.C.)

  14. OHVT technology roadmap [2000

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, R.A.

    2000-02-01

    The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones.

  15. Development of National Technology Audit Policy

    OpenAIRE

    Subiyanto Subiyanto

    2017-01-01

    The Laws have mandated implementation of technology audit, nevertheless such implementation needs an additional policy that is more technical. The concept of national audit technology policy shall make technology audit as a tool to ensure the benefit of technology application for society and technology advance for nation independency. This article discusses on technology audit policy concept especially infrastructure requirement, with emphasis on regulation, implementation tools, and related ...

  16. Designing Next Generation Telecom Regulation

    DEFF Research Database (Denmark)

    Henten, Anders; Samarajiva, Rohan

    – ICT convergence regulation and multisector utility regulation. Whatever structure of next generation telecom regulation is adopted, all countries will need to pay much greater attention to the need for increased coordination of policy directions and regulatory activities both across the industries......Continuously expanding applications of information and communication technologies (ICT) are transforming local, national, regional and international economies into network economies, the foundation for information societies. They are being built upon expanded and upgraded national telecom networks...... to creating an environment to foster a massive expansion in the coverage and capabilities of the information infrastructure networks, with national telecom regulators as the key implementers of the policies of reform. The first phase of reform has focused on industry specific telecom policy and regulation...

  17. Regulating nuclear fuel waste

    International Nuclear Information System (INIS)

    1995-01-01

    When Parliament passed the Atomic Energy Control Act in 1946, it erected the framework for nuclear safety in Canada. Under the Act, the government created the Atomic Energy Control Board and gave it the authority to make and enforce regulations governing every aspect of nuclear power production and use in this country. The Act gives the Control Board the flexibility to amend its regulations to adapt to changes in technology, health and safety standards, co-operative agreements with provincial agencies and policy regarding trade in nuclear materials. This flexibility has allowed the Control Board to successfully regulate the nuclear industry for more than 40 years. Its mission statement 'to ensure that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment' concisely states the Control Board's primary objective. The Atomic Energy Control Board regulates all aspects of nuclear energy in Canada to ensure there is no undue risk to health, safety, security or the environment. It does this through a multi-stage licensing process

  18. Photovoltaics technology program summary

    Science.gov (United States)

    1985-05-01

    An adequate supply of energy at reasonable price is discussed. Economic efficiency and the following strategies to obtain it are suggested: (1) minimization of federal regulation in energy pricing; and (2) promote a balanced and mixed energy resource system. The development of photovoltaic energy conversion technology is summarized.

  19. Subliminal communication technology

    Science.gov (United States)

    Various types of subliminal communication devices presently in use, the psychological basis for subliminal technology, and the effectiveness of subliminal communication for therapy are examined as well as potentials for abuse. Social, legal, and ethical aspects are considered with respect to the privacy and autonomy of captive audiences. Implications for the regulation of subliminal techniques are reviewed with application to the various media.

  20. Regulating Internalities

    OpenAIRE

    Sunstein, Cass Robert; Allcott, Hunt

    2015-01-01

    This paper offers a framework for regulating internalities. Using a simple economic model, we provide four principles for designing and evaluating behaviorally-motivated policy. We then outline rules for determining which contexts reliably reflect true preferences and discuss empirical strategies for measuring internalities. As a case study, we focus on energy efficiency policy, including Corporate Average Fuel Economy (CAFE) standards and appliance and lighting energy efficiency standards.

  1. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  2. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  3. Re-Framing Biotechnology Regulation.

    Science.gov (United States)

    Peck, Alison

    Biotechnology is about to spill the banks of federal regulation. New genetic engineering techniques like CRISPR-Cas9 promise revolutionary breakthroughs in medicine, agriculture, and public health—but those techniques would not be regulated under the terms of the Coordinated Framework for Regulation of Biotechnology. This revolutionary moment in biotechnology offers an opportunity to correct the flaws in the framework, which was hastily patched together at the advent of the technology. The framework has never captured all relevant technologies, has never satisfied the public that risk is being effectively managed, and has never been accessible to small companies and publicly-funded labs that increasingly are positioned to make radical, life-saving innovations. This Article offers a proposal for new legislation that would reshape biotechnology regulation to better meet these goals. Key reforms include tying regulation to risk rather than technology category; consolidating agency review; capturing distinct regulatory expertise through inter-agency consultations; creating a clearinghouse to help guide applicants and disseminate information; setting up more comprehensive monitoring of environmental effects; and providing federal leadership to fill key data gaps and address socio-economic impacts.

  4. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  5. Rover Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature rover technologies supporting robotic exploration including rover design, controlling rovers over time delay and for exploring . Technology...

  6. Effective regulation under conditions of scientific uncertainty: how collaborative networks contribute to occupational health and safety regulation for nanomaterials

    NARCIS (Netherlands)

    Reichow, Aline

    2015-01-01

    This thesis seeks to understand, and evaluate, the contribution of business associations within the United States (US) and German chemical sector, to the effective regulation of nanomaterials. In the effective regulation of new technologies characterized by high scientific uncertainty, with

  7. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  8. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  9. 78 FR 67847 - Debt Collection (Regulation F)

    Science.gov (United States)

    2013-11-12

    ... ( www.RegulationRoom.org ), that uses web technologies and approaches to enhance public understanding... that RegulationRoom is not an official United States Government Web site. Although comments made on... range of other businesses. Skip-tracing companies, for instance, provide contact information for...

  10. Sodium technology handbook

    International Nuclear Information System (INIS)

    2005-09-01

    This document was published as a textbook for the education and training of personnel working for operations and maintenances of sodium facilities including FBR plants and those engaged in R and D activities related to sodium technology. This handbook covers the following technical areas. Properties of sodium. Compatibilities of sodium with materials. Thermalhydraulics and structural integrity. Sodium systems and components. Sodium instrumentations. Sodium handling technology. Sodium related accident evaluation and countermeasures for FBRs. Operation, maintenance and repair technology of sodium facilities. Safety measures related to sodium. Laws, regulations and internal rules related to sodium. The plannings and discussions of the handbook were made in the Sodium Technology Education Committee organized in O-arai Engineering Center consisting of the representatives of the related departments including Tsuruga headquarters. Experts in various departments participated in writing individual technical subjects. (author)

  11. Introduction to nuclear technology

    International Nuclear Information System (INIS)

    Goldsmith, M.W.

    1985-01-01

    In the late 1940s and early 1950s when nuclear technology emerged, there was no oil embargo or any obvious signs of an energy crisis. The driving forces for the rapid development of the atom were its fuel efficiency and its potential cost-effectiveness compared to its alternatives. Uranium was a cheap and abundant domestic fuel and the development of the technology provided new vistas and challenges for the engineering community. It was the goal of providing environmentally clean, abundant, and reasonably priced energy that motivated engineers then as now. Nuclear technology developed under a mixture of government regulation and promotion and utility industry commercialization. This paper discusses the development and implementation of a technology largely resulting from the efforts of government to make the production of nuclear-powered electricity a commercial enterprise. This effort has largely succeeded, as greater than 10% of the electricity generated nationally is now provided by nuclear power

  12. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    International Nuclear Information System (INIS)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

  13. Compliance with air quality regulations

    International Nuclear Information System (INIS)

    Steen, D.V.; Tackett, D.L.

    1990-01-01

    Due to the probable passage of Clean Air Act Amendments in 1990, electric utilities throughout the United States are faced with numerous choices to comply with the new acid rain regulations, expected in 1991. The choice of a compliance plan is not a simple task. Every compliance option will be costly. At Ohio Edison, deliberations are quite naturally influenced by past compliance with air quality regulations. This paper discusses compliance with air quality regulations in the 1970's, clean coal technologies and advanced scrubbers, and compliance with air quality regulations in 1995 - 2000. The choice of a compliance strategy for many utilities will involve serving customer loads through some combination of scrubbers, clean coal technologies, fuel switching, fuel blending, redispatch of units, and emissions trading. Whatever the final choice, it must be economic while providing sufficient flexibility to accommodate the critical uncertainties of load growth, state regulatory treatment, markets for emission allowances, advancements in control technologies, additional federal requirements for air emissions, equipment outages and fuel supply disruptions.s

  14. Casting Technology.

    Science.gov (United States)

    Wright, Michael D.; And Others

    1992-01-01

    Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

  15. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  16. Technology transfer

    International Nuclear Information System (INIS)

    1998-01-01

    On the base of technological opportunities and of the environmental target of the various sectors of energy system this paper intend to conjugate the opportunity/objective with economic and social development through technology transfer and information dissemination [it

  17. Transnational models for regulation of nanotechnology.

    Science.gov (United States)

    Marchant, Gary E; Sylvester, Douglas J

    2006-01-01

    Like all technologies, nanotechnology will inevitably present risks, whether they result from unintentional effects of otherwise beneficial applications, or from the malevolent misuse of technology. Increasingly, risks from new and emerging technologies are being regulated at the international level, although governments and private experts are only beginning to consider the appropriate international responses to nanotechnology. In this paper, we explore both the potential risks posed by nanotechnology and potential regulatory frameworks that law may impose. In so doing, we also explore the various rationales for international regulation including the potential for cross-boundary harms, sharing of regulatory expertise and resources, controlling protectionism and trade conflicts, avoiding a "race to the bottom" in which governments seek economic advantage through lax regulation, and limiting the "nano divide" between North and South. Finally, we examine some models for international regulation and offer tentative thoughts on the prospects for each.

  18. Earthing Technology

    NARCIS (Netherlands)

    Blok, Vincent

    2017-01-01

    In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

  19. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  20. Remediation Technology Collaboration Development

    Science.gov (United States)

    Mahoney, John; Olsen, Wade

    2010-01-01

    This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

  1. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...... & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990...

  2. Technology roadmaps

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, B. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre

    2003-07-01

    The purpose of a technology road map is to define the state of a current technology, relevant market issues, and future market needs; to develop a plan that industry can follow to provide these new products and services; and to map technology pathways and performance goals for bringing these products and services to market. The three stages (planning, implementation, and reviewing and updating), benefits, and status of the Clean Coal Technology Roadmap are outlined. Action Plan 2000, a $1.7 million 2000 Climate Change Technology and Innovation Program, which uses the technology roadmapping process, is described. The members of the management steering committee for the Clean Coal Technology Roadmap are listed. A flowsheet showing activities until November 2004, when the final clean coal road map is due, is included.

  3. Nuclear Safety Regulations

    International Nuclear Information System (INIS)

    Novosel, N.; Prah, M.

    2008-01-01

    Beside new Ordinance on the control of nuclear material and special equipment ('Official Gazette' No. 15/08), from 2006 State Office for Nuclear Safety (SONS) adopted Ordinance on performing nuclear activities ('Official Gazette' No. 74/06) and Ordinance on special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety ('Official Gazette' No. 74/06), based on Nuclear Safety Act ('Official Gazette' No. 173/03). The Ordinance on performing nuclear activities regulates the procedure of notification of the intent to perform nuclear activities, submitting the application for the issue of a licence to perform nuclear activities, and the procedure for issuing decisions on granting a licence to perform a nuclear activity. The Ordinance also regulates the content of the forms for notification of the intent to perform nuclear activities, as well as of the application for the issue of a licence to perform the nuclear activity and the method of keeping the register of nuclear activities. According to the Nuclear Safety Act, nuclear activities are the production, processing, use, storage, disposal, transport, import, export, possession or other handling of nuclear material or specified equipment. The Ordinance on special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety regulates these mentioned conditions, whereas compliance is established by a decision passed by the SONS. Special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety are organizational, technical, technological conditions and established system of quality assurance. In 2007, State Office for Nuclear Safety finalized the text of new Ordinance on conditions for nuclear safety and protection with regard to the siting, design, construction, use and decommissioning of a facility in which a nuclear activity is

  4. New Nuclear Safety Regulations

    International Nuclear Information System (INIS)

    Novosel, N.; Prah, M.; Cizmek, A.

    2008-01-01

    Beside new Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08), from 2006 State Office for Nuclear Safety (SONS) adopted Ordinance on performing nuclear activities (Official Gazette No. 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (Official Gazette No. 74/06), based on Nuclear Safety Act (Official Gazette No. 173/03). The Ordinance on performing nuclear activities regulates the procedure of announcing the intention to perform nuclear activity, submitting an application for the issue of a license to perform nuclear activity, and the procedure for adoption a decision on issuing a nuclear activity license. The Ordinance also regulates the contents of the application form for the announcement of the intention to perform nuclear activity, as well as of the application for the issue of a nuclear activity license and the method of keeping a nuclear activity register. The Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety regulates these mentioned conditions, whereas compliance is established by a decision passed by the SONS. Special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety are organizational, technical, technological conditions and established system of quality assurance. In 2007, SONS finalized the text of new Ordinance on nuclear safety and protection conditions for location, design, construction, operation and decommissioning of facility in which nuclear activity is performed. This Ordinance regulates nuclear safety and protection conditions for location, design, construction, operation and decommissioning of facility in which nuclear activity is performed. This Ordinance defines facilities in which nuclear activity is

  5. Appropriate Technology as Indian Technology.

    Science.gov (United States)

    Barry, Tom

    1979-01-01

    Describes the mounting enthusiasm of Indian communities for appropriate technology as an inexpensive means of providing much needed energy and job opportunities. Describes the development of several appropriate technology projects, and the goals and activities of groups involved in utilizing low scale solar technology for economic development on…

  6. 3-D bioprinting law regulation perspectives.

    Science.gov (United States)

    Pashkov, Vitalii; Harkusha, Andrii

    Achieved level of technical progress moves us closer and closer to practical use of 3-d bioprinting technologies in real life. Such perspective raise a wide variety of crucial legal issues from the acceptable model of regulation of the science and its' societal effects to problems of the commercialization of the technology and potential restrictions of its use. Some key points on concept of legal regulation of abovementioned sphere is a base of this study. Scientific discussion on 3-D bioprinting, European Union`s and US experience in patenting of 3-D bioprinting technologies, European Medicine Agency (EMA) or the US Food and Drug Administration (FDA) regulations, European Medical Technology Industry Association (EUCOMED) Acts. Article is based on dialectical, comparative, analytic, synthetic and comprehensive research methods. General debate of last few years comes down to an attempt to resolve hesitation between legal attempts for regulation of 3-D biobrinting and concept of complete prohibition of such activities. An adequate response to the mentioned challenge is a reasonable position between some aspects of prohibition and self-regulation, resulting in a moderate number of regulations and standards for developing and marketing. Such regulations may concern an intellectual property (IP) rights, regulation of distribution, premarket restrictions, control mechanism etc. Scientific approach and regulatory settlement of 3-D bioprinting sphere must unite to achieve a fair balance between the interests of humanity and of individuals - on the one hand, and development of science and business benefits for stakeholders - on the other. The main instruments for this must be balanced regulation of intellectual property (IP) rights, regulation of access and distribution, premarket restrictions, control mechanism etc.

  7. Political construction of technology

    International Nuclear Information System (INIS)

    Bruheze, A.A.A. de la.

    1992-01-01

    In the 1970s radioactive waste disposal became a controversial scientific and social issue in the United States, after the US Atomic Energy Commission (AEC) charged with the development, regulation and promotion of nuclear technology, had tried to implement its disposal technology near Lyons, Kansas. This study traces the emergence of this controversy as part of the long-term development of the US radioactive waste disposal technology. Radioactive waste was not always considered a problem, and different meanings were attached to radwaste in the 1940s and early 1950s. Problem definitions and technical designs that underlaid this technology can be reconstructed, and its possible to show how some definitions received attention and others not, and how some became, and remained, dominant. During the process of problem definition, views compete, agendas are built, resources are allocated, and boundaries are created and maintained between 'inside' and 'outside world'. This is a political process, and by heuristically using concepts from political science and recent technology studies, the Political Construction of US radioactive waste disposal technologically can be reconstructed. (author). 301 refs.; 3 figs.; 15 tabs

  8. Technology '90

    International Nuclear Information System (INIS)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report

  9. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital camera...... and other devices are depicted by everyday aesthetics as capable of producing a unique human presence and interaction. The medium, the technology is a necessary helper of this very special and lost humanity. Without the technology, no special humanity, no soul - such is the prophecy. This personification...... or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization...

  10. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...... of innovation" understanding of learning. Narula and Smith reconcile an important paradox. On the one hand, locations and firms are increasingly interdependent through supranational organisations, regional integration, strategic alliances, and the flow of investments, technologies, ideas and people...

  11. Army Technology

    Science.gov (United States)

    2015-02-01

    that allows them to perform applied research under the Institute for Biotechnology research team 1 2 3 20 | ARMY TECHNOLOGY MAGAZINE ...DASA(R&T) Deputy Assistant Secretary of the Army for Research and Technology Download the magazine , view online or read each individual story with...Army photo by Conrad Johnson) Front and back cover designs by Joe Stephens EXECUTIVE DEPUTY TO THE COMMANDING GENERAL Army Technology Magazine is an

  12. Technology alliances

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Boczar, P.G.; Kugler, G.

    1991-10-01

    In the field of nuclear technology, Canada and Korea developed a highly successful relationship that could serve as a model for other high-technology industries. This is particularly significant when one considers the complexity and technical depth required to design, build and operate a nuclear reactor. This paper will outline the overall framework for technology transfer and cooperation between Canada and Korea, and will focus on cooperation in nuclear R and D between the two countries

  13. Technological risks

    International Nuclear Information System (INIS)

    Klinke, A.; Renn, O.

    1998-01-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  14. Technological risks

    Energy Technology Data Exchange (ETDEWEB)

    Klinke, A.; Renn, O. [Center of Technology Assessment in Baden-Wuerttemberg, Stuttgart (Germany)

    1998-07-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  15. U.S. Experiences and Regulatory Challenges with New Medical Technologies

    International Nuclear Information System (INIS)

    Elee, J.

    2016-01-01

    There are many challenges in regulating new medical technologies in the United States. In the US, there are fifty different state agencies, several local and city agencies, and eleven federal agencies which all delve into some aspects of regulating the use of radiation. It also can take several years to promulgate new regulations for new technologies. Additionally, some technologies are used outside of their original approved/intended use which causes issues for regulators. Finally, many of our regulating agencies have limited resources to learn and train on the new technologies that are on the market. All of these reasons combine to make regulating new technologies and uses of radiation difficult. (author)

  16. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  17. Application of cytotoxicity test for toxic micropollutants. Saibo dokusei shiken ni yoru yugai kagaku busshitsu osen no hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Utsumi, H; Hamada, A [Showa University, Tokyo (Japan). School of Pharmaceutical Science; Ono, Y [National Institute of Hygienic Sciences, Tokyo (Japan)

    1992-10-01

    Considerations were given from a viewpoint of assessing toxicity to human bodies on methods of assessing water pollutants and organisms, and applicability of cytotoxity test using cultured cells to water quality assessment. Biological assessment systems used for water environment may use tests using multicellular organisms, cells, or organelles in cells. The organism assessment method is intended mainly for assessing ecological effects, and a suitable method must be selected upon extrapolating it to human bodies. A toxicity parameter used most frequently in a cytotoxity test is the cell revival rate, and life and death are determined from liberation of enzymes in cells, or with color rejection tests and incorporation tests. There are a number of test specimens of raw tap water and its chlorine treatment condensate that show no mutagenicity but cytotoxity. Efficiencies of removal by means of mild chlorine treatment, fast filtration, and activated carbon adsorption vary greatly with cytotoxity and mutagenicity. Introducing the cytotoxity test is expected of further contributing to improving safety in water quality. 24 refs., 1 fig., 7 tabs.

  18. Technology Catalogue

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

  19. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  20. Technology Exhibition

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1979-09-15

    Linked to the 25th Anniversary celebrations, an exhibition of some of CERN's technological achievements was opened on 22 June. Set up in a new 600 m{sup 2} Exhibition Hall on the CERN site, the exhibition is divided into eight technology areas — magnets, vacuum, computers and data handling, survey and alignment, radiation protection, beam monitoring and handling, detectors, and workshop techniques.

  1. Radiation Technology

    International Nuclear Information System (INIS)

    1990-01-01

    The conference was organized to evaluate the application directions of radiation technology in Vietnam and to utilize the Irradiation Centre in Hanoi with the Co-60 source of 110 kCi. The investigation and study of technico-economic feasibility for technology development to various items of food and non-food objects was reported. (N.H.A)

  2. Technology Transformation

    Science.gov (United States)

    Scott, Heather; McGilll, Toria

    2011-01-01

    Social networking and other technologies, if used judiciously, present the means to integrate 21st century skills into the classroom curriculum. But they also introduce challenges that educators must overcome. Increased concerns about plagiarism and access to technology can test educators' creativity and school resources. Air Academy High School,…

  3. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  4. Hardware-in-the-loop environment for the design and test of regulators in the refrigeration technology; Hardware-in-the-Loop Umgebung fuer den Entwurf und Test von kaeltetechnischen Reglern

    Energy Technology Data Exchange (ETDEWEB)

    Koeberle, Thomas; Becker, Martin [Hochschule Biberach (Germany). Inst. fuer Gebaeude- und Energiesysteme

    2012-07-01

    test environment and new simulation models based on component libraries were created. Furthermore, a hardware coupler was developed in order to capture the control signals and to pass on the simulated state variables to the controller. Next to the hardware interface, several software interfaces were programmed in order to facilitate the communication between the hardware and software by means of a middleware. Real cooling controllers were used to perform first tests at the test environment. The functionality of the test environment was proven. The tests have shown that the test environment is suitable for the desired comparison of the energy efficiency of regulators. The test environment will be developed later in the project, so that not only refrigeration controller may be tested as hitherto, but also regulators for the power control of refrigerators and cold water exchange regulators. In addition to the application of the test environment for the evaluation of the efficiency regulators already available on the market, the test environment also can be applied for the development of new control concepts, strategies and algorithms. In addition, new applications in the refrigeration engineering are possible. Thus, the test environment could be used for example for pre-commissioning of the regulator in order to reduce the time of commissioning of refrigeration systems on-site.

  5. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  6. Legal aspects of auxillary reproductive technologies in infertility treatment

    OpenAIRE

    V.Yu. Albitskiy; N.D. Odinayeva; V.O. Mansimova

    2011-01-01

    The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

  7. OHVT technology roadmap[2000]; TOPICAL

    International Nuclear Information System (INIS)

    Bradley, R.A.

    2000-01-01

    The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones

  8. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  9. 48 CFR 39.104 - Information technology services.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

  10. 48 CFR 1852.227-70 - New technology.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true New technology. 1852.227-70... New technology. As prescribed in 1827.303-70(b), insert the following clause: New Technology (NOV 1998... administration of this New Technology clause within six months of conception and/or first actual reduction to...

  11. Governing Science, Technology and Innovation:

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2007-01-01

    Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexi...

  12. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  13. Technology | FNLCR

    Science.gov (United States)

    The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

  14. Plasma technology

    International Nuclear Information System (INIS)

    Drouet, M.G.

    1984-03-01

    IREQ was contracted by the Canadian Electrical Association to review plasma technology and assess the potential for application of this technology in Canada. A team of experts in the various aspects of this technology was assembled and each team member was asked to contribute to this report on the applications of plasma pertinent to his or her particular field of expertise. The following areas were examined in detail: iron, steel and strategic-metals production; surface treatment by spraying; welding and cutting; chemical processing; drying; and low-temperature treatment. A large market for the penetration of electricity has been identified. To build up confidence in the technology, support should be provided for selected R and D projects, plasma torch demonstrations at full power, and large-scale plasma process testing

  15. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  16. Technology and ecological economics. Promethean technology, Pandorian potential

    Energy Technology Data Exchange (ETDEWEB)

    Small, Bruce [AgResearch Ltd., Private Bag 3123, Hamilton (New Zealand); Jollands, Nigel [New Zealand Centre for Ecological Economics, Massey University and Landcare Research Ltd, Private Bag 11052, Palmerston North (New Zealand)

    2006-03-15

    In considering social, economic and ecological impacts of new technologies it is essential to start from an understanding of human nature. This paper explores this issue drawing out some implications for ecological and neoclassical economics. The paper presents two key arguments. First, we argue that there is a growing tension between our evolved human nature and social structures and our emerging technological prowess. Modern technologies give us increasing power to manipulate the very axes of nature: space, time, energy, matter, and life. Technologies are now so powerful they give us abilities our ancestors would consider godlike. The question is posed: Are humans ready to wield the power of the gods? We have the knowledge, but do we have the wisdom? The myth of Prometheus and Pandora is considered as a metaphor for the interaction between technology, nature and universal aspects of human nature developed over eons of evolution. Second, we argue that even a 'technologically optimistic' scenario (employed by some economists) may not actually deliver Utopian outcomes. With technological advancement and diffusion there is a 'technological trickle down effect' whereby potent technologies, once available only to governments and powerful elites, become available to greater numbers of groups and individuals. The more accessible a technology, the more likely its social and ecological impacts will be shaped by the full range and extremes of human nature. These issues have implications for the development and regulation of Promethean technologies such as nuclear energy, genetic engineering and nanotechnology; technologies with unprecedented power and reach through nature. Development and diffusion of such technologies may also have implications for the ethics of the social structure of society. (author)

  17. Technological risk

    Energy Technology Data Exchange (ETDEWEB)

    Dierkes, M; Coppock, R; Edwards, S

    1980-01-01

    The book begins with brief statements from representatives of political organizations. Part II presents an overview of the discussion about the control and management of technological progress. Parts III and IV discuss important elements in citizens' perception of technological risks and the development of consensus on how to deal with them. In Part V practical problems in the application of risk assessment and management, and in Part VI additional points are summarized.

  18. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  19. Technological risk

    International Nuclear Information System (INIS)

    Dierkes, M.; Coppock, R.; Edwards, S.

    1980-01-01

    The book begins with brief statements from representatives of political organizations. Part II presents an overview of the discussion about the control and management of technological progress. Parts III and IV discuss important elements in citizens' perception of technological risks and the development of consensus on how to deal with them. In Part V practical problems in the application of risk assessment and management, and in Part VI additional points are summarized. (DG)

  20. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  1. Competition between bank regulators

    OpenAIRE

    Schindler, Dirk; Eggert, Wolfgang

    2004-01-01

    This paper examines competition between bank regulators in open economies. We use a model where credit demand of firms is endogenous and show any tendency for downward competition in regulation policy is limited by the effect of regulation on profits of nonfinancial firms. Moreover, perfect mobility on loans and deposit markets fully eliminates the incentives of regulators to set bank regulation at ine±cient low levels.

  2. Developing technologies and resources

    Energy Technology Data Exchange (ETDEWEB)

    Walker, R.S. [Canadian Nuclear Laboratories, Chalk River, ON (Canada)

    2015-07-01

    Our success as a nuclear nation rests on interdependent pillars involving industry, governments, regulators, and academia. In a context of coherent public policy, we must achieve: 5 Nuclear Industry Priorities: Ensure refurbishments are completed to cost and schedule; Achieve Canadian supply chain success in international nuclear business; Support a strong Canadian nuclear science, technology and innovation agenda; Enhance the supply of skilled workers; Develop a coordinated and integrated strategy for the long term management of all radioactive waste materials; Refine communication strategies informed by insights from social sciences. Canada's nuclear sector has the opportunity to adapt to the opportunities presented by having a national laboratory in Canada.

  3. Developing technologies and resources

    International Nuclear Information System (INIS)

    Walker, R.S.

    2015-01-01

    Our success as a nuclear nation rests on interdependent pillars involving industry, governments, regulators, and academia. In a context of coherent public policy, we must achieve: 5 Nuclear Industry Priorities: Ensure refurbishments are completed to cost and schedule; Achieve Canadian supply chain success in international nuclear business; Support a strong Canadian nuclear science, technology and innovation agenda; Enhance the supply of skilled workers; Develop a coordinated and integrated strategy for the long term management of all radioactive waste materials; Refine communication strategies informed by insights from social sciences. Canada's nuclear sector has the opportunity to adapt to the opportunities presented by having a national laboratory in Canada.

  4. Food Irradiation Regulations And Code Of Practice

    International Nuclear Information System (INIS)

    Jimba, B.W. Centre For Energy Research And Training, Ahmadu Bello University, Zaria,

    1996-01-01

    Official attitude towards irradiated food is determined by factors such as: level of scientific knowledge, consumer habits, food shortages, agricultural production and technological know-how. To date, 39 countries have accepted the process for one or more food items while 27 nations carry out the process on a commercial basis. Regulations and codes of practice is essential for consumer confidence while uniformity of regulations, at the international level, will enhance international trade in irradiated food items. The internationally accepted Codex Standard on irradiated food and Codes of Practice for the operation of irradiation facilities, adopted in 1983, forms the basis for International regulations and a template for nations in the development of regulations. This paper discusses the basic legal requirements for licensing the process, procedures, facility and the operator and suggests a framework for a national regulation based on experiences of Hungary, Brazil and Israel

  5. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  6. Regulating through leverage: Civil regulation in China

    NARCIS (Netherlands)

    Fürst, K.

    2016-01-01

    The overarching goal of this study is to examine the efforts of Chinese NGOs to prevent and/or control industrial pollution risks and then use the findings of this research to study the nature of civil regulation in, and beyond, China’s authoritarian setting. It first argues that 'regulation through

  7. Low water FGD technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-15

    Conventional flue gas desulphurisation (FGD) systems require large supplies of water. Technologies which reduce water usage are becoming more important with the large number of FGD systems being installed in response to ever tightening emission regulations. Reducing water loss is particularly important in arid regions of the world. This report reviews commercial and near commercial low water FGD processes for coal-fired power plants, including dry, semi-dry and multi-pollutant technologies. Wet scrubbers, the most widely deployed FGD technology, account for around 10–15% of the water losses in power plants with water cooling systems. This figure is considerably higher when dry/air cooling systems are employed. The evaporative water losses can be reduced by some 40–50% when the flue gas is cooled before it enters the wet scrubber, a common practice in Europe and Japan. Technologies are under development to capture over 20% of the water in the flue gas exiting the wet scrubber, enabling the power plant to become a water supplier instead of a consumer. The semi-dry spray dry scrubbers and circulating dry scrubbers consume some 60% less water than conventional wet scrubbers. The commercial dry sorbent injection processes have the lowest water consumption, consuming no water, or a minimal amount if the sorbent needs hydrating or the flue gas is humidified to improve performance. Commercial multi-pollutant systems are available that consume no water.

  8. ABC Technology Development Program

    International Nuclear Information System (INIS)

    1994-01-01

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: 'Provide a weapon's grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon's grade plutonium to be disposed on in [20] years.' This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments

  9. Management of health technologies: An international view

    NARCIS (Netherlands)

    Jonsson, E.; Banta, D.

    1999-01-01

    Health technology includes not only equipment, pharmaceuticals, and medical devices but also surgical and medical procedures Most countries regulate drugs and devices by law, by payment, or by placement of services-a new, multidisciplinary research called health technology assessment assists policy

  10. Smart technology

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1991-01-01

    The success of smart technology in the pursuit of the Gulf War has accentuated the awareness of how the Safeguards and Security disciplines are changing in response to new weaponry. Throughout the Department of Energy Integrated Complex (IC) Safeguards and Security efforts such as: Protection Programs Operations; Materials, Controls and Accountability; Information Security; Computer Security; Operational Security; Personnel Security, Safeguards and/or Security (S and S) surveys, and Inspections and Evaluations are undergoing a reassessment and refocusing. Some of this is in response to such things as the DOE initiated Freeze Report and the Drell Report. An important aspect is also technological, adjusting the way business is done in light of the weapons, tools and processes/procedures becoming available. This paper addresses the S and S issues with the promise of using smart technology to develop new approaches and equipment across the IC

  11. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  12. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  13. Technology Management

    DEFF Research Database (Denmark)

    Pilkington, Alan

    2014-01-01

    This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...

  14. Superconducting technology

    International Nuclear Information System (INIS)

    2010-01-01

    Superconductivity has a long history of about 100 years. Over the past 50 years, progress in superconducting materials has been mainly in metallic superconductors, such as Nb, Nb-Ti and Nb 3 Sn, resulting in the creation of various application fields based on the superconducting technologies. High-T c superconductors, the first of which was discovered in 1986, have been changing the future vision of superconducting technology through the development of new application fields such as power cables. On basis of these trends, future prospects of superconductor technology up to 2040 are discussed. In this article from the viewpoints of material development and the applications of superconducting wires and electronic devices. (author)

  15. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  16. Technological Inovattion

    Directory of Open Access Journals (Sweden)

    Alexandra Bostan

    2009-06-01

    Full Text Available The spectacular development of technology within the field of informatics and telecommunicationfor the last decade, associated with a postindustrial revolution, has solidly contributed to the globalization ofthe contemporary international economic life. A very important factor in promoting the globalization ofproduction and the financial globalization is the recent progress from the technology of information andcommunication which has a strong impact on the economic, social and cultural life. The postindustrialrevolution marks the transfer from an industrial based culture to a culture based on information,communication and experience.

  17. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  18. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  19. 48 CFR 311.7000 - Defining electronic information technology requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

  20. Ultrasonication and food technology: A review

    OpenAIRE

    Ishrat Majid; Gulzar Ahmad Nayik; Vikas Nanda

    2015-01-01

    With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extractio...

  1. Technology Transfer: Marketing Tomorrow's Technology

    Science.gov (United States)

    Tcheng, Erene

    1995-01-01

    The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

  2. Health technology

    International Nuclear Information System (INIS)

    Nicolas, Delphine; Dangleant, Caroline; Ganier, Aude; Kaczmarek, Delphine

    2008-01-01

    The CEA is an organization with a primarily technological focus, and one of the key areas in which it carries out research is Health Technology. This field of research was recognized and approved by the French Atomic Energy Committee on July 20, 2004. The expectations of both the public and health care professionals relate to demands for the highest standards of health care, at minimum risk. This implies a need to diagnose illness and disease as accurately and as at early a stage as possible, to target surgery precisely to deal only with damaged organs or tissues, to minimize the risk of side effects, allergies and hospital-acquired infections, to follow-up and, as far as possible, tailor the health delivery system to each individual's needs and his or her lifestyle. The health care sector is subject to rapid changes and embraces a vast range of scientific fields. It now requires technological developments that will serve to gather increasing quantities of useful information, analyze and integrate it to obtain a full understanding of highly complex processes and to be able to treat the human body as un-invasively as possible. All the technologies developed require assessment, especially in the hospital environment. (authors)

  3. Technology transfer

    International Nuclear Information System (INIS)

    Boury, C.

    1986-01-01

    This paper emphasizes in the specific areas of design, engineering and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  4. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  5. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  6. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  7. Atomic Energy Control Regulations

    International Nuclear Information System (INIS)

    1992-01-01

    This is the consolidated text of the Atomic Energy Control Regulations of 17 March 1960, with amendments to 27 August 1992. The Regulations cover the licensing of nuclear facilities, radiation sources, including uranium mining, radiation protection questions, etc. (NEA)

  8. Environmental regulation and competitiveness

    NARCIS (Netherlands)

    Mulatu, A.; Florax, R.J.G.M.; Withagen, C.A.A.M.

    2001-01-01

    The potential relationship between domestic environmental regulation and international competitiveness has evoked various speculations. The common neoclassical train of thought is that strict environmental regulation is detrimental to the competitiveness of industry, and that it induces phenomena

  9. Ocean Dumping Control Regulations

    International Nuclear Information System (INIS)

    1978-01-01

    These Regulations were made further to the Ocean Dumping Control Act which provides for restrictions in dumping operations. The Regulations contain model applications for permits to dump or load a series of materials. (NEA)

  10. Regulation of Genetic Tests

    Science.gov (United States)

    ... for Genomics Research Intellectual Property Issues in Genetics Archive Online Bioethics Resources Privacy in Genomics Regulation of ... are not regulated, meaning that they go to market without any independent analysis to verify the claims ...

  11. Trout Stream Special Regulations

    Data.gov (United States)

    Minnesota Department of Natural Resources — This layer shows Minnesota trout streams that have a special regulation as described in the 2006 Minnesota Fishing Regulations. Road crossings were determined using...

  12. Photovoltaic technologies

    International Nuclear Information System (INIS)

    Bagnall, Darren M.; Boreland, Matt

    2008-01-01

    Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5-6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost-competitive solar energy in 10-15 years. (author)

  13. Vacuum Technology

    Energy Technology Data Exchange (ETDEWEB)

    Biltoft, P J

    2004-10-15

    The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

  14. Unconditionally Stable Low Dropout Regulators for Extreme Environments, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — We have developed a low dropout (LDO) regulator using a patented MESFET transistor technology that can be manufactured in commercial CMOS foundries with no changes...

  15. 7 CFR 3411.1 - Applicability of regulations.

    Science.gov (United States)

    2010-01-01

    ... teams whose research has the eventual goal of technology transfer and education capacity through the... Agriculture Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION... improve research capabilities in the agricultural, food, and environmental sciences in the following...

  16. Technology Retreats and the Politics of Social Media

    Directory of Open Access Journals (Sweden)

    Adam Fish

    2017-04-01

    Full Text Available This essay examines weeklong technology retreats in Silicon Valley. These retreats embody digital healthism, which I define as the discourse that promotes the self-regulation of digital consumption for personal health. I argue that the self-regulation advanced by digital healthism insufficiently addresses the politics of media refusal. Technology retreats channel frustrations about social media use into opportunities for personal and corporate growth instead of political activism. I consider how technology retreats might participate in a dialogue about the regulation of social media platforms and companies by states. Evidence for these claims come from ethnographic research with the founders of a technology retreat in Silicon Valley.

  17. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo [ed.

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  18. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  19. How Does Environmental Regulation Affect Industrial Transformation? A Study Based on the Methodology of Policy Simulation

    Directory of Open Access Journals (Sweden)

    Wei Liu

    2016-01-01

    Full Text Available The difference of factor input structure determines different response to environmental regulation. This paper constructs a theoretical model including environmental regulation, factor input structure, and industrial transformation and conducts a policy simulation based on the difference of influencing mechanism of environmental regulation considering industrial heterogeneity. The findings show that the impact of environmental regulation on industrial transformation presents comparison of distortion effect of resource allocation and technology effect. Environmental regulation will promote industrial transformation when technology effect of environmental regulation is stronger than distortion effect of resource allocation. Particularly, command-control environmental regulation has a significant incentive effect and spillover effect of technological innovation on cleaning industries, but these effects do not exist in pollution-intensive industries. Command-control environmental regulation promotes industrial transformation. The result of simulation showed that environmental regulation of market incentives is similar to that of command-control.

  20. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  1. The International Traffic in Arms Regulations: An Impediment to National Security

    National Research Council Canada - National Science Library

    Mahon, Steven G

    2008-01-01

    The International Traffic in Arms Regulations (ITAR) is putting United States (U.S.) advanced technology and weapons companies at a competitive disadvantage, particularly in the fields of satellite manufacturing and technology...

  2. 77 FR 69483 - Federal Acquisition Regulation; Information Collection; Summary Subcontract Report

    Science.gov (United States)

    2012-11-19

    ... be posted without change to http://www.regulations.gov , including any personal and/or business... appropriate technological collection techniques or other forms of information technology. DATES: Submit... small business, small disadvantaged business, historically underutilized business zone (HUBZone) small...

  3. 75 FR 66686 - Defense Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for...

    Science.gov (United States)

    2010-10-29

    ... Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for Commercial... Balance of Payments Program for construction material that is commercial information technology. DATES... the Balance of Payments Program for commercial information technology to be used in overseas...

  4. Culture and emotion regulation.

    Science.gov (United States)

    Ford, Brett Q; Mauss, Iris B

    2015-06-01

    While anthropological research has long emphasized cultural differences in whether emotions are viewed as beneficial versus harmful, psychological science has only recently begun to systematically examine those differences and their implications for emotion regulation and well-being. Underscoring the pervasive role of culture in people's emotions, we summarize research that has examined links between culture, emotion regulation, and well-being. Specifically, we focus on two questions. First, how does culture lead individuals to regulate their emotions? And second, how does culture modulate the link between emotion regulation and well-being? We finish by suggesting directions for future research to advance the study of culture and emotion regulation.

  5. Radiation Control Regulation 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This Regulation (No. 434-1993) was made in pursuance of the Radiation Control Act 1990 and replaces the Active Substances Regulations 1959 repealed by the Act. It entered into force on 1 September 1993. The Regulation specifies that the technical radiation protection definitions have the same meaning as in the 1990 recommendations. The Regulation provides for the licensing of persons to use radioactive substances and radiation apparatus. It prescribes activities which may only be carried out by an accredited radiation expert and regulates the use of radiation apparatus and radioactive substances as well as the disposal and transport of radiation apparatus and radioactive substances. (NEA)

  6. Load regulating expansion fixture

    International Nuclear Information System (INIS)

    Wagner, L.M.; Strum, M.J.

    1998-01-01

    A free standing self contained device for bonding ultra thin metallic films, such as 0.001 inch beryllium foils is disclosed. The device will regulate to a predetermined load for solid state bonding when heated to a bonding temperature. The device includes a load regulating feature, whereby the expansion stresses generated for bonding are regulated and self adjusting. The load regulator comprises a pair of friction isolators with a plurality of annealed copper members located there between. The device, with the load regulator, will adjust to and maintain a stress level needed to successfully and economically complete a leak tight bond without damaging thin foils or other delicate components. 1 fig

  7. Technological elixir

    Energy Technology Data Exchange (ETDEWEB)

    Snieckus, Darius

    2000-07-01

    In a short article, the aim of Pilot (formerly the Oil and Gas Industry Task Force) is discussed with respect to extending the productive life of the North Sea. The head of Pilot is the Industry Facilitator MD David Ellix and he believes that the new technology will restore the North Sea to its former level of productivity. The problems, and how they are to be addressed, are discussed.

  8. Technology transfer

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Illustrated by the example of the FRG's nuclear energy exports, it is shown that the nuclear technology transfer leads to new dimensions of intergovernmental relations, which hold within themselves on account of multiple state-to-state, scientific, industrial and - last but not least - personal contacts the chance of far-reaching friendships between countries and people. If the chance is taken, this can also be seen as an important contribution towards maintaining the peace. (orig.) [de

  9. Nuclear technology

    International Nuclear Information System (INIS)

    1983-03-01

    This report examines nuclear technology in Canada, with emphasis on Quebec, as a means of revitilizing industry. The historical, present day, and future states of Atomic Energy of Canada Limited are examined. Future research programs are discussed in greatest detail. These range from disposal of porcine wastes to new applications for electricity to nuclear medical techniques (to cite only a few examples). The executive summary is written in English. (23 fig., 16 tab.)

  10. Group technology

    International Nuclear Information System (INIS)

    Rome, C.P.

    1976-01-01

    Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

  11. Clean coal technologies

    International Nuclear Information System (INIS)

    Aslanyan, G.S.

    1993-01-01

    According to the World Energy Council (WEC), at the beginning of the next century three main energy sources - coal, nuclear power and oil will have equal share in the world's total energy supply. This forecast is also valid for the USSR which possesses more than 40% of the world's coal resources and continuously increases its coal production (more than 700 million tons of coal are processed annually in the USSR). The stringent environmental regulations, coupled with the tendency to increase the use of coal are the reasons for developing different concepts for clean coal utilization. In this paper, the potential efficiency and environmental performance of different clean coal production cycles are considered, including technologies for coal clean-up at the pre-combustion stage, advanced clean combustion methods and flue gas cleaning systems. Integrated systems, such as combined gas-steam cycle and the pressurized fluidized bed boiler combined cycle, are also discussed. The Soviet National R and D program is studying new methods for coal utilization with high environmental performance. In this context, some basic research activities in the field of clean coal technology in the USSR are considered. Development of an efficient vortex combustor, a pressurized fluidized bed gasifier, advanced gas cleaning methods based on E-beam irradiation and plasma discharge, as well as new catalytic system, are are presented. In addition, implementation of technological innovations for retrofitting and re powering of existing power plants is discussed. (author)

  12. Biohydrometallurgical technologies

    International Nuclear Information System (INIS)

    Torma, A.E.; Wey, J.E.; Lakshmanan, V.I.

    1993-01-01

    The theme of the International Biohydrometallurgy Symposium held in Jackson Hole, Wyoming, August 22-25, 1993, is ''Biohydrometallurgy: An Industry Matures.'' This is a developing technology which made important contributions to the minerals industry. Biohydrometallurgical technology was first introduced into the copper industry and subsequently to the uranium industry for the production of metal values from low-grade mineral resources. Currently, biotechnology has advanced a step further. It is now commercially applied for the treatment of high-grade refractory gold ores in aerated stirred reactors to liberate precious metals for cyanidation. In addition, the industrial applications of biotechnology involve bioenhanced tertiary oil recovery processes, which contribute to an increase in oil production from previously exhausted wells. Furthermore, many bioremediation technologies are being developed for the removal of toxic heavy metals and radionuclides from contaminated soils and aqueous mining and industrial effluents. This volume contains papers selected for publication which are predominantly dealing with subjects related to laboratory and industrial scale bioleaching of base and precious metals, biocorrosion phenomena, diverse bioreduction processes and electrochemical reactions. Individual papers have been processed separately for inclusion in the appropriate data bases

  13. Volume regulation in epithelia

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Hoffmann, Else Kay

    2016-01-01

    to amphibian skin and mammalian cortical collecting tubule of low and intermediate osmotic permeability. Crosstalk between entrance and exit mechanisms interferes with volume regulation both at aniso-osmotic and iso-osmotic volume perturbations. It has been proposed that cell volume regulation is an intrinsic...... regulation are cloned. The volume-regulated anion channel (VRAC) exhibiting specific electrophysiological characteristics seems exclusive to serve cell volume regulation. This is contrary to K+ channels as well as cotransporters and exchange mechanisms that may serve both transepithelial transport and cell...... volume regulation. In the same cell, these functions may be maintained by different ion pathways that are separately regulated. RVD is often preceded by increase in cytosolic free Ca2+, probably via influx through TRP channels, but Ca2+ release from intracellular stores has also been observed. Cell...

  14. Voltage regulator for generator

    Energy Technology Data Exchange (ETDEWEB)

    Naoi, K

    1989-01-17

    It is an object of this invention to provide a voltage regulator for a generator charging a battery, wherein even if the ambient temperature at the voltage regulator rises abnormally high, possible thermal breakage of the semiconductor elements constituting the voltage regulator can be avoided. A feature of this invention is that the semiconductor elements can be protected from thermal breakage, even at an abnormal ambient temperature rise at the voltage regulator for the battery charging generator, by controlling a maximum conduction ratio of a power transistor in the voltage regulator in accordance with the temperature at the voltage regulator. This is achieved through a switching device connected in series to the field coil of the generator and adapted to be controlled in accordance with an output voltage of the generator and the ambient temperature at the voltage regulator. 6 figs.

  15. Communication between a Matrix Converter Modulator and a Superset Regulator

    Directory of Open Access Journals (Sweden)

    P. Pošta

    2008-01-01

    Full Text Available This work deals with the modulator of a matrix converter and its communication with the superset regulator. A switching algorithm is briefly introduced. The input voltage measurement method is presented. In the last part of the paper, the testing of communication between the superset regulator and the modulator in FPGA technology are also presented. 

  16. Fostering Self-Regulation in Training Complex Cognitive Tasks

    Science.gov (United States)

    van Meeuwen, Ludo W.; Brand-Gruwel, Saskia; Kirschner, Paul A.; de Bock, Jeano J. P. R.; van Merriënboer, Jeroen J. G.

    2018-01-01

    In complex cognitive domains such as air traffic control, professionals must be able to adapt to and act upon continuing changes in a highly advanced technological work environment. To function optimally in such an environment, the controllers must be able to regulate their learning. Although these regulation skills should be part of their…

  17. Pollution Under Environmental Regulation in Energy Markets

    CERN Document Server

    Gullì, Francesco

    2013-01-01

    Pollution Under Environmental Regulation in Energy Markets provides a study of environmental regulation when energy markets are imperfectly competitive. This theoretical treatment focuses on three relevant cases of energy markets. First, the residential space heating sector where hybrid regulation such as taxation and emissions trading together are possible. Second, the electricity market where transactions are organized in the form of multi-period auctions. Third, namely natural gas (input) and electricity (output) markets where there is combined imperfect competition in vertical related energy markets.   The development of free or low carbon technologies supported by energy policies, aiming at increasing security of supply, is also explored whilst considering competition policies that reduce market power in energy markets thus improving market efficiency. Pollution Under Environmental Regulation in Energy Markets discusses the key issues of whether imperfect competition can lessen the ability of environmen...

  18. Federal radiation protection regulations: An industry viewpoint

    International Nuclear Information System (INIS)

    Harward, E.D.

    1987-01-01

    Regulations and standards to protect the public and workers from ionizing radiation have been in transition for a number of years, although most of the basic limits in use have remained essentially unchanged over the past 25 years or so. Legislation, political changes, new scientific data, advances in scientific concepts, and finally, public perception and resulting pressures have all been factors in the modifications that have been implemented or considered for radiation protection regulations in recent years. During this period, radiation exposures to both the public and the work force have been reduced through program management and improved technology. Based on activities of the AIF Subcommittee on Radiation Protection, this paper reviews pertinent NRC and EPA regulations, standards and guidance as well as NCRP recommendations and provide some analyses of these in terms of their potential effect on nuclear industry operations. Comments include suggestions where minor changes in Federal agency approaches to radiation regulation might be made for the public benefit

  19. German rules and regulations eith special reference to application documents

    International Nuclear Information System (INIS)

    Kraut, A.

    1979-01-01

    Regulations and standards play an essential role in achieving a safe and economic technology and in making the licensing procedure systematic, effective and clear. German rules and regulations applicable to the nuclear field are presented in this paper together with references to the rulemaking organizations. Detailed information is given on those rules and regulations, which prescribe the requirements concerning necessary documents for the nuclear licensing procedure. (author)

  20. 科技进步拓展意思自治之适用空间-论代孕中亲子关系的认定的规制模式选择%The Improvement of Science and Technology Expands the Applicability of Private Autonomy:On the Mode Selection of the Regulation that Identiifes Parent-child Relationship in Surrogacy

    Institute of Scientific and Technical Information of China (English)

    关剑夫

    2016-01-01

    人工辅助生殖技术的进步使得人类获得了前所未有的操纵生殖过程的自由。这一自由正在我国被大量利用,以帮助众多家庭克服不孕不育的困境。然而私法规制的缺位导致当事人,尤其是代孕生育子女的权利难以得到保障。在规制代孕中的亲子关系时,“事实行为”模式呆板僵化,无法满足现实需求;“法律行为”模式,立足于科技进步带来的伦理物可支配性,采取尊重当事人的自由意志的态度,将科技催生的新生事物纳入社会家庭伦常的轨道,既具有可行性,又具有必要性。%The improvement of artiifcial reproductive technology allows human beings to get unprecedented freedom to manipulate the reproductive process. This freedom is frequently utilized to help many families overcome infertility. However, the absence of private regulation leads to the dififculties in guaranteeing the rights of parties of surrogacy contracts, especially the rights of the babies. The regulation mode of “the factual act” and “the legal act” are optional. While the mode of “the factual act” is too ossiifcation to meet the needs of the lfexible reality, the mode of “the legal act” is rather optimal, as it is based on the fact that the new technologies allows the ethical things to be deposited, and it take the attitude of respect the will of the parties of surrogacy contracts, which would lead the surrogacy into the track of the traditional moral system of our society.

  1. 10 CFR 603.1340 - Technology investment agreement.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Technology investment agreement. 603.1340 Section 603.1340 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in this Part § 603.1340 Technology investment agreement. A TIA is a special type of...

  2. 48 CFR 2452.239-71 - Information Technology Virus Security.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Information Technology... Provisions and Clauses 2452.239-71 Information Technology Virus Security. As prescribed in 2439.107(b), insert the following clause: Information Technology Virus Security (FEB 2006) (a) The contractor hereby...

  3. 48 CFR 939.7002 - Contractor acquisition of information technology.

    Science.gov (United States)

    2010-10-01

    ... information technology. 939.7002 Section 939.7002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Implementing DOE Policies and Procedures 939.7002 Contractor acquisition of information technology. (a) Management and operating (M&O...

  4. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  5. PIGMI technology

    International Nuclear Information System (INIS)

    Swenson, D.A.

    1980-01-01

    The accelerator technologies relevant to the design of a medically practical pion generator for medical irradiations (PIGMI) have been identified and developed. A base-case design for PIGMI is presented here. The accelerator portion of the PIGMI facility consists of an injector, an rf quadrupole linac structure, a drift-tube linac structure, a coupled-cavity linac structure, 1 440-MHz rf system, six 1320-MHz rf systems, and a control and instrumentation system. Each of these components is described in some detail. A 100-μA, 650-MeV proton beam is anticipated. 24 figures, 2 tables

  6. 77 FR 63805 - Federal Acquisition Regulation; Information Collection; Service Contracting

    Science.gov (United States)

    2012-10-17

    ... use of appropriate technological collection techniques or other forms of information technology. DATES... all correspondence related to this collection. All comments received will be posted without change to http://www.regulations.gov , including any personal and/or business confidential information provided...

  7. UK medicines regulation: responding to current challenges.

    Science.gov (United States)

    Richards, Natalie; Hudson, Ian

    2016-12-01

    The medicines regulatory environment is evolving rapidly in response to the changing environment. Advances in science and technology have led to a vast field of increasingly complicated pharmaceutical and medical device products; increasing globalization of the pharmaceutical industry, advances in digital technology and the internet, changing patient populations, and shifts in society also affect the regulatory environment. In the UK, the Medicines and Healthcare products Regulatory Agency (MHRA) regulates medicines, medical devices and blood products to protect and improve public health, and supports innovation through scientific research and development. It works closely with other bodies in a single medicines network across Europe and takes forward UK health priorities. This paper discusses the range of initiatives in the UK and across Europe to support innovation in medicines regulation. The MHRA leads a number of initiatives, such as the Innovation Office, which helps innovators to navigate the regulatory processes to progress their products or technologies; and simplification of the Clinical Trials Regulations and the Early Access to Medicines Scheme, to bring innovative medicines to patients faster. The Accelerated Access Review will identify reforms to accelerate access for National Health Service patients to innovative medicines and medical technologies. PRIME and Adaptive Pathways initiatives are joint endeavours within the European regulatory community. The MHRA runs spontaneous reporting schemes and works with INTERPOL to tackle counterfeiting and substandard products sold via the internet. The role of the regulator is changing rapidly, with new risk-proportionate, flexible approaches being introduced. International collaboration is a key element of the work of regulators, and is set to expand. © 2016 The British Pharmacological Society.

  8. TOWARD MORE EFFECTIVE REGULATION

    Energy Technology Data Exchange (ETDEWEB)

    J. GRAF

    2000-06-01

    This paper proposes a model relationship between the operator engaged in a hazardous activity, the regulator of that activity, and the general public. The roles and responsibilities of each entity are described in a way that allows effective communication flow. The role of the regulator is developed using the steam boiler as an example of a hazard subject to regulation; however, the model applies to any regulated activity. In this model the safety analyst has the extremely important role of communicating sometimes difficult technical information to the regulator in a way that the regulator can provide credible assurance to the general public as to the adequacy of the control of the hazardous activity. The conclusion asserts that acceptance of the model, understanding of the roles and responsibilities and definition of who communicates what information to whom will mitigate frustration on the part of each of the three entities.

  9. The development of regulations

    International Nuclear Information System (INIS)

    Slokan Dusic, D.; Levstek, M.F.; Stritar, A.

    2003-01-01

    In October 2002, The Act on Protection Against Ionising Radiation and Nuclear Safety which regulates all aspects of protection against ionising radiation and nuclear safety entered into force in Slovenia. The Slovenian government and its responsible ministries shall issue several governmental and ministerial regulations to support the above - mentioned act. The Slovenian Nuclear Safety Administration (SNSA) which acts within the Ministry of the Environment, Spatial Planing and Energy takes an active part in drafting the regulations which are defined in the act. Due to a very comprehensive and pretentious task, that is to be completed in a relatively short period of time, taking into consideration the involvement of stakeholders and all competent ministries, the SNSA within the Quality Management System developed a special procedure that insures the systematic approach to the preparation of regulations. The article will briefly represent the process that: defines the preparation, development, harmonisation, review, approval and issue of regulations and uniforms the format of developed regulations. (author)

  10. Regulating hedge funds.

    OpenAIRE

    Daníelsson, J.; Zigrand, JP.

    2007-01-01

    Due to the ever-increasing amounts under management and their unregulated and opaque nature, hedge funds have emerged as a key concern for policymakers. While until now, hedge funds have been left essentially unregulated, we are seeing increasing calls for regulation for both microprudential and macroprudential reasons. In our view, most calls for the regulation of hedge funds are based on a misperception of the effectiveness of financial regulations, perhaps coupled with a lack of understand...

  11. Wearable Technology

    Science.gov (United States)

    Watson, Amanda

    2013-01-01

    Wearable technology projects, to be useful, in the future, must be seamlessly integrated with the Flight Deck of the Future (F.F). The lab contains mockups of space vehicle cockpits, habitat living quarters, and workstations equipped with novel user interfaces. The Flight Deck of the Future is one element of the Integrated Power, Avionics, and Software (IPAS) facility, which, to a large extent, manages the F.F network and data systems. To date, integration with the Flight Deck of the Future has been limited by a lack of tools and understanding of the Flight Deck of the Future data handling systems. To remedy this problem it will be necessary to learn how data is managed in the Flight Deck of the Future and to develop tools or interfaces that enable easy integration of WEAR Lab and EV3 products into the Flight Deck of the Future mockups. This capability is critical to future prototype integration, evaluation, and demonstration. This will provide the ability for WEAR Lab products, EV3 human interface prototypes, and technologies from other JSC organizations to be evaluated and tested while in the Flight Deck of the Future. All WEAR Lab products must be integrated with the interface that will connect them to the Flight Deck of the Future. The WEAR Lab products will primarily be programmed in Arduino. Arduino will be used for the development of wearable controls and a tactile communication garment. Arduino will also be used in creating wearable methane detection and warning system.

  12. Understanding Technology?

    Directory of Open Access Journals (Sweden)

    Erik Bendtsen

    2016-11-01

    Full Text Available We are facing radical changes in our ways of living in the nearest future. Not necessarily of our own choice, but because tchnological development is moving so fast, that it will have still greater impact on many aspects of our lives. We have seen the beginnings of that change within the latest 35 years or so, but according to newest research that change will speed up immensely in the nearest years to come. The impact of that change or these changes will affect our working life immensely as a consequence of automation. How these changes are brought about and which are their consequences in a broad sense is being attempted to be understood and guessed by researchers. No one knows for sure, but specific patterns are visible. This paper will not try to guess, what will come, but will rather try to understand the deepest ”nature” of technology in order to understand the driving factors in this development: the genesis of technology in a broad sense in order to contibute to the understanding of the basis for the expected development.

  13. Nuclear technologies

    International Nuclear Information System (INIS)

    Toyama, Makoto; Hamasaki, Manabu; Kobayashi, Masahiko; Hoshide, Akihiko; Katayama, Kimio; Nozawa, H.; Karigome, Satoshi

    2010-01-01

    In recent days, energy security is becoming a major global concern and it has been recognized that a major reduction in greenhouse-gas emissions is required to combat climate change. Considerable expansion and new introduction of nuclear power generation are currently being planned and considered for the further in various parts of the world. Nuclear technologies of the latest 10 years in Japan were reviewed with their characteristics, advancement and future perspective. Steady efforts have been made to construct new nuclear power stations with computer-aided engineering system and modular and prefabricated structures, extend the interval of periodic inspections under the new inspection system that should improve both safety and reliability, implement advanced measures against aging and develop the next-generation light water reactors including a medium small reactor. Export of nuclear power plants has been promoted with international business alliance or cooperation. Activities to close nuclear fuel cycle to ensure sustainable nuclear energy utilization have been promoted. Decommissioning technologies for Tokai power station have been developed and accumulated know-how will be utilized in light water reactors. (T. Tanaka)

  14. Regulating household financial advice

    Directory of Open Access Journals (Sweden)

    Benjamin F. Cummings

    2012-08-01

    Full Text Available This paper reviews economic theory related to investment advice. This theory explains 1 why financial advisors need to be carefully regulated for the benefit of both the investment advice industry and for consumers, 2 why principles-based regulation (e.g., a fiduciary standard is more efficient than rules-based regulation, 3 why dual regulation of financial professionals providing investment or insurance advice is inefficient and inequitable policy, and 4 why the application of a universal and uniform fiduciary standard will be difficult to implement.

  15. The regulation of hunting

    DEFF Research Database (Denmark)

    Abildtrup, Jens; Jensen, Frank

    Within hunting, wildlife populations are estimated to be too high in many countries which is assumed to be due to the market failure, that each hunter harvests too little compared to what the regulator wants. This may be due to the existing regulation which, among other things, requires knowledge...... by an individual, variable tax rate. The variable tax rate is, among other things, based on the difference in marginal value of the population between the hunter and the regulator. The paper shows that the population tax/subsidy secures a first-best optimum. Thus, the population tax is a good alternative...... to the existing regulation....

  16. Nuclear safety and regulation

    International Nuclear Information System (INIS)

    Kim, Hho Jung

    2000-03-01

    This book contains 12 chapters, which are atom and radiation, nuclear reactor and kinds of nuclear power plant, safeguard actuation system and stability evaluation for rock foundation of nuclear power plant, nuclear safety and principle, safety analysis and classification of incident, probabilistic safety assessment and major incident, nuclear safety regulation, system of nuclear safety regulation, main function and subject of safety regulation in nuclear facilities, regulation of fuel cycle and a nuclear dump site, protection of radiation and, safety supervision and, safety supervision and measurement of environmental radioactivity.

  17. 31 CFR 539.201 - Prohibited importation of goods, technology, or services.

    Science.gov (United States)

    2010-07-01

    ..., technology, or services. 539.201 Section 539.201 Money and Finance: Treasury Regulations Relating to Money... date, directly or indirectly, of any goods, technology, or services produced or provided by a... DESTRUCTION TRADE CONTROL REGULATIONS Prohibitions § 539.201 Prohibited importation of goods, technology, or...

  18. Technology transfer and technological learning through CERN's procurement activity

    CERN Document Server

    Autio, Erkko; Hameri, Ari-Pekka; CERN. Geneva

    2003-01-01

    This report analyses the technological learning and innovation benefits derived from CERN's procurement activity during the period 1997-2001. The base population of our study, the technology-intensive suppliers to CERN, consisted of 629 companies out of 6806 companies during the same period, representing 1197 MCHF in procurement. The main findings from the study can be summarized as follows: the various learning and innovation benefits (e.g., technological learning, organizational capability development, market learning) tend to occur together. Learning and innovation benefits appear to be regulated by the quality of the supplier's relationship with CERN: the greater the amount of social capital built into the relationship, the greater the learning and innovation benefits. Regardless of relationship quality, virtually all suppliers derived significant marketing reference benefits from CERN. Many corollary benefits are associated with procurement activity. As an example, as many as 38% of the respondents devel...

  19. Incinerator technology overview

    Science.gov (United States)

    Santoleri, Joseph J.

    1993-03-01

    Many of the major chemical companies in the U.S. who regarded a safe environment as their responsibility installed waste treatment and disposal facilities on their plant sites in the last two decades. Many of these plants elected to use incinerators as the treatment process. This was not always the most economical method, but in many cases it was the only method of disposal that provided a safe and sure method of maximum destruction. Environmental concern over contamination from uncontrolled land disposal sites, and the emergence of tougher regulations for land disposal provide incentives for industry to employ a wide variety of traditional and advanced technologies for managing hazardous wastes. Incineration systems utilizing proper design, operation, and maintenance provides the safest, and in the long run, the most economical avenue to the maximum level of destruction of organic hazardous wastes.

  20. On the Regulation of Life Safety Risk

    DEFF Research Database (Denmark)

    Faber, Michael Havbro; Sørensen, John Dalsgaard; Vrouwenvelder, A.C.W.M.

    2015-01-01

    . Starting point is taken in a short outline of what is considered to comprise the present best practice rationale for life safety and health risk regulation. Thereafter, based on selected principal examples from different application areas, inconsistencies in present best practice risk quantification...... absolute level of individual life safety risk subject to assessment of acceptability. It is highlighted that a major cause of inconsistency in risk quantifications and comparisons originates from the fact that present regulations partly address societal activities and partly address applied technologies...

  1. Contraceptive technology.

    Science.gov (United States)

    Potts, M; Atkinson, L

    1984-06-01

    A question of the 1980s is how will contraceptive technology contribute to improving family planning services to meet the goal of making available a simple, safe, effective, and widely acceptable contraceptive method. Significant changes in existing technology in the 1970s resulted in safer and more effective contraceptive methods. Voluntary sterilization emerged as the primary method in developed and developing countries, as important modifications simplified the procedure for women. The tolerance and effectiveness of the IUD were improved by reducing its size, adding copper to its surface, or encapsulating progesterone within it. The steroid content of the birth control pill was reduced 10-fold, leading to fewer side effects, and the pill was found to be an effective postcoital contraceptive when taken at specific intervals. Vacuum aspiration for the termination of 1st trimester pregnancy proved to be 1 of the safest surgical techniques practiced. Belated attention is now being focused on adapting existing contraceptive methods for use during the postpartum period and breast feeding. The insertion of an IUD immediately following childbirth is a particularly useful option in the developing world as an increasing number of women have their babies in urban hospitals. A method of enhancing the contraceptive effect of breast feeding should neither change milk production nor transfer the drug to the nursing infant. Fortunately, progestin-only pills have been found to have no effect on breast milk and an attempt is being made to expand the use of this approved method. More simplification of female sterilization is needed. Current techniques require back-up facilities in case of complications and are unlikely to meet the developing world's enormous demand. 2 methods not widely used -- spermicides and periodic abstinence -- are coming under new scrutiny. In mid-1983 the US Food and Drug Administration approved a spermicide-impregnanated disposable sponge for over

  2. Medical technology in Japan the politics of regulation

    CERN Document Server

    Altenstetter, Christa

    2014-01-01

    Compared to its American and European counterparts, Japan lags in adopting innovative medical devices and making new treatments and procedures available. Christa Altenstetter examines the contextual conditions of Japan's medical profession and its regulatory framework. Altenstetter looks into how physicians and device companies connect to the government and bureaucracy, the relationships connecting Japanese patients to their medical system and governmental bureaucracy, and how relationships between policymakers and the medical profession are changing.

  3. Entering the Matrix: The Challenge of Regulating Radical Leveling Technologies

    Science.gov (United States)

    2015-12-01

    Source Horizon: 3D Printing,” LinuxInsider, May 28, 2014, http://www.linuxinsider.com/story/ 80519.html; Nozomi Hayase, “ Blockchain Revolution: Open...Source Democracy for the 99%,” openDemocracy UK, August 4, 2014, https://www.opendemocracy.net/ourkingdom/nozomi-hayase/ blockchain -revolution-open...Issues of Copyright Law.” SCRIPT-ed 2, no. 4 (December 2005): 545–71. doi: 10.2966/scrip.020405.514. Hayase, Nozomi. “ Blockchain Revolution: Open

  4. Biohydrometallurgical technologies

    International Nuclear Information System (INIS)

    Torma, A.E.; Apel, M.L.; Brierley, C.L.

    1993-01-01

    The theme of the International Biohydrometallurgy Symposium (IBS) held in Jackson Hole, Wyoming, August 22--25, 1993, is ''Biohydrometallurgy: An Industry Matures''. This is a developing technology which made important contributions to the minerals industry. The IBS-93 is focused on recent advances achieved in fundamental and applied aspects of research and development of biotechnologies applied to mineral domains. The papers presented at the Symposium are grouped together in two volumes, which are the following: this volume contains papers selected for publication which are predominantly dealing with subjects related to laboratory and industrial scale bioleaching of base and precious metals, biocorrosion phenomena, diverse bioreduction processes and electrochemical reactions. Individual papers have been processed separately for inclusion in the appropriate data bases

  5. Robot technology

    International Nuclear Information System (INIS)

    Vertut, Jean; Coiffet, Philippe.

    1985-01-01

    Teleoperation is concerned with the exploration and exploitation of of spaces which do not allow, because of their inaccessibility or hostility, direct access to man. This volume (Parts 2, 3 and 4) covers the contribution of computer science and automatic control to this technology. Part 2 includes a description of teleoperation systems followed by chapters on the operator substitution function by computer feedback to the operator. Part 3 has chapters on performance evaluation of teleoperation systems and the human operator in the teleoperation system. Part 4 is about applications of teleoperation in the nuclear industry, underwater, in space, in medicine, in industry and in security and civil protection. The nuclear applications include research and pilot facilities, reactor operation and maintenance, reactor decommissioning and dismantling and in emergencies, for example following a reactor accident. (U.K.)

  6. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Mogensen, A.C. [Demand Data Services Inc., Calgary, AB (Canada)

    2001-06-01

    This paper addressed the issue of how the petroleum industry can prepare itself with regards to the imminent changes in communication mechanisms as the Internet and World-Wide-Web are being accepted as the norm for all technical and scientific information services. In particular, the paper focused on new technologies for data acquisition, well site monitoring and data analysis where information is gathered from a remote site to the office. The paper also reviewed modeling concepts which show that secure and dependable data communications can disseminate information to personnel within an organization to make informed decisions and reduce response time. The topic is particularly relevant to the petroleum industry as fluctuations in oil and gas pricing, global competition, environmental policy, and government monetary and fiscal policy have forced companies to change the way they conduct business. Security issues associated with data communication were also addressed. 3 refs., 6 figs.

  7. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  8. Powder technology

    International Nuclear Information System (INIS)

    Agueda, Horacio

    1989-01-01

    Powder technology is experiencing nowadays a great development and has broad application in different fields: nuclear energy, medicine, new energy sources, industrial and home artifacts, etc. Ceramic materials are of daily use as tableware and also in the building industry (bricks, tiles, etc.). However, in machine construction its utilization is not so common. The same happens with metals: powder metallurgy is employed less than traditional metal forming techniques. Both cases deal with powder technology and the forming techniques as far as the final consolidation through sintering processes are very similar. There are many different methods and techniques in the forming stage: cold-pressing, slip casting, injection molding, extrusion molding, isostatic pressing, hot-pressing (which involves also the final consolidation step), etc. This variety allows to obtain almost any desired form no matter how complex it could be. Some applications are very specific as in the case of UO 2 pellets (used as nuclear fuels) but with the same technique and other materials, it is possible to manufacture a great number of different products. This work shows the characteristics and behaviour of two magnetic ceramic materials (ferrites) fabricated in the laboratory of the Applied Research Division of the Bariloche Atomic Center for different purposes. Other materials and products made with the same method are also mentioned. Likewise, densities and shrinkage obtained by different methods of forming (cold-pressing, injection molding, slip casting and extrusion molding) using high-purity alumina (99.5% Al 2 O 3 ). Finally, different applications of such methods are given. (Author) [es

  9. Lander Technologies

    Science.gov (United States)

    Chavers, Greg

    2015-01-01

    Since 2006 NASA has been formulating robotic missions to the lunar surface through programs and projects like the Robotic Lunar Exploration Program, Lunar Precursor Robotic Program, and International Lunar Network. All of these were led by NASA Marshall Space Flight Center (MSFC). Due to funding shortfalls, the lunar missions associated with these efforts, the designs, were not completed. From 2010 to 2013, the Robotic Lunar Lander Development Activity was funded by the Science Mission Directorate (SMD) to develop technologies that would enable and enhance robotic lunar surface missions at lower costs. In 2013, a requirements-driven, low-cost robotic lunar lander concept was developed for the Resource Prospector Mission. Beginning in 2014, The Advanced Exploration Systems funded the lander team and established the MSFC, Johnson Space Center, Applied Physics Laboratory, and the Jet Propulsion Laboratory team with MSFC leading the project. The lander concept to place a 300-kg rover on the lunar surface has been described in the New Technology Report Case Number MFS-33238-1. A low-cost lander concept for placing a robotic payload on the lunar surface is shown in figures 1 and 2. The NASA lander team has developed several lander concepts using common hardware and software to allow the lander to be configured for a specific mission need. In addition, the team began to transition lander expertise to United States (U.S.) industry to encourage the commercialization of space, specifically the lunar surface. The Lunar Cargo Transportation and Landing by Soft Touchdown (CATALYST) initiative was started and the NASA lander team listed above is partnering with three competitively selected U.S. companies (Astrobotic, Masten Space Systems, and Moon Express) to develop, test, and operate their lunar landers.

  10. Offsite demonstrations for MWLID technologies

    International Nuclear Information System (INIS)

    Williams, C.; Gruebel, R.

    1995-01-01

    The goal of the Offsite Demonstration Project for Mixed Waste Landfill Integrated Demonstration (MWLID)-developed environmental site characterization and remediation technologies is to facilitate the transfer, use, and commercialization of these technologies to the public and private sector. The meet this goal, the project identified environmental restoration needs of mixed waste and/or hazardous waste landfill owners (Native American, municipal, DOE, and DoD); documenting potential demonstration sites and the contaminants present at each site; assessing the environmental regulations that would effect demonstration activities; and evaluating site suitability for demonstrating MWLID technologies at the tribal and municipal sites identified. Eighteen landfill sites within a 40.2-km radius of Sandia National Laboratories are listed on the CERCLIS Site/Event Listing for the state of New Mexico. Seventeen are not located within DOE or DoD facilities and are potential offsite MWLID technology demonstration sites. Two of the seventeen CERCLIS sites, one on Native American land and one on municipal land, were evaluated and identified as potential candidates for off-site demonstrations of MWLID-developed technologies. Contaminants potentially present on site include chromium waste, household/commercial hazardous waste, volatile organic compounds, and petroleum products. MWLID characterization technologies applicable to these sites include Magnetometer Towed Array, Cross-borehole Electromagnetic Imaging, SitePlanner trademark/PLUME, Hybrid Directional Drilling, Seamist trademark/Vadose Zone Monitoring, Stripping Analyses, and x-ray Fluorescence Spectroscopy for Heavy Metals

  11. Peak regulation right

    International Nuclear Information System (INIS)

    Gao, Z. |; Ren, Z.; Li, Z.; Zhu, R.

    2005-01-01

    A peak regulation right concept and corresponding transaction mechanism for an electricity market was presented. The market was based on a power pool and independent system operator (ISO) model. Peak regulation right (PRR) was defined as a downward regulation capacity purchase option which allowed PRR owners to buy certain quantities of peak regulation capacity (PRC) at a specific price during a specified period from suppliers. The PRR owner also had the right to decide whether or not they would buy PRC from suppliers. It was the power pool's responsibility to provide competitive and fair peak regulation trading markets to participants. The introduction of PRR allowed for unit capacity regulation. The PRR and PRC were rated by the supplier, and transactions proceeded through a bidding process. PRR suppliers obtained profits by selling PRR and PRC, and obtained downward regulation fees regardless of whether purchases are made. It was concluded that the peak regulation mechanism reduced the total cost of the generating system and increased the social surplus. 6 refs., 1 tab., 3 figs

  12. Soft Regulators, though judges

    NARCIS (Netherlands)

    de Geest, G.G.A.; Dari Mattiacci, G.

    Judges have a tendency to be more demanding than regulators. In the United States, a majority of the courts has adopted the rule that the unexcused violation of a statutory standard is negligence per se. However, the converse does not hold: compliance with regulation does not relieve the injurer of

  13. Mortgage market regulation: Europe

    NARCIS (Netherlands)

    Aalbers, M.B.; Smith, S.J.

    2012-01-01

    Despite several European Union (EU) initiatives, there is only limited pan-European mortgage market regulation. The EU strategy can be characterised as one of parallel liberalisation and consolidation. This article highlights the key differences in regulation among European mortgage markets.

  14. Microfluidic Technologies for Synthetic Biology

    Directory of Open Access Journals (Sweden)

    Sung Kuk Lee

    2011-06-01

    Full Text Available Microfluidic technologies have shown powerful abilities for reducing cost, time, and labor, and at the same time, for increasing accuracy, throughput, and performance in the analysis of biological and biochemical samples compared with the conventional, macroscale instruments. Synthetic biology is an emerging field of biology and has drawn much attraction due to its potential to create novel, functional biological parts and systems for special purposes. Since it is believed that the development of synthetic biology can be accelerated through the use of microfluidic technology, in this review work we focus our discussion on the latest microfluidic technologies that can provide unprecedented means in synthetic biology for dynamic profiling of gene expression/regulation with high resolution, highly sensitive on-chip and off-chip detection of metabolites, and whole-cell analysis.

  15. Regulation as Rhetoric

    DEFF Research Database (Denmark)

    Boll, Karen; Györy, Csaba

    This paper analyses the way regulatory agencies strategically use public ‘rhetoric’ and ‘management of appearance’ to strengthen their regulation. It reports a comparative study of the Securities and Exchange Commission (SEC) which is the US federal securities regulator and the Danish Tax...... and Customs Administration (SKAT) which is the national tax regulator in Denmark. SEC operates in a US context where the agency fights to get trust, while SKAT operates in a context where high trust in public agencies is a basic condition. We argue, however, that despite the radically different institutional...... engage reflectively in image promotion which serves two purposes: establishing and maintaining legitimacy in a particular social and political environment and producing compliance. Further, we argue that this regulation is a form of ‘post-bureaucratic’ regulation in which compliance is achieved...

  16. Reconceptualizing Civil Regulation

    DEFF Research Database (Denmark)

    Galang, Roberto Martin; Castello, Itziar

    2011-01-01

    This article re-conceptualizes the notion of civil regulation, through an analysis of 775 projects by firms located in 21 Asian countries, wherein we map the state of civil regulation initiatives in the region. We challenge two established assumptions in the Corporate Social Responsibility litera....... Finally, we argue that, in Asia, governments act as a structuration mechanism which challenges the current understanding of CSR.......This article re-conceptualizes the notion of civil regulation, through an analysis of 775 projects by firms located in 21 Asian countries, wherein we map the state of civil regulation initiatives in the region. We challenge two established assumptions in the Corporate Social Responsibility...... and environmental standards; but also that local, small and medium companies play a key role in the development of Asian civil regulation. We call this second finding the “CSR importation trap”. Our findings are supported by evidence on the limitations in the interchangeable properties of business and governments...

  17. Regulation for innovativeness or regulation of innovation?

    NARCIS (Netherlands)

    Larouche, Pierre; Butenko, Anna

    2015-01-01

    The legal literature concerning the interplay between innovation and law is split between two streams: law and economics (broadly defined) and law and technology. They seem to exist in parallel and largely non-intersecting inter-disciplinary silos. This paper attempts to reconcile these two streams

  18. 34 CFR 614.3 - What regulations apply to this program?

    Science.gov (United States)

    2010-07-01

    ... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION PREPARING TOMORROW'S TEACHERS TO USE TECHNOLOGY § 614.3 What... Technology: (a) The Education Department General Administrative Regulations (EDGAR) as follows: (1) 34 CFR... 34 Education 3 2010-07-01 2010-07-01 false What regulations apply to this program? 614.3 Section...

  19. Pupils' Readiness for Self-Regulated Learning in the Forethought Phase of Exploratory Production

    Science.gov (United States)

    Metsärinne, Mika; Kallio, Manne; Virta, Kalle

    2015-01-01

    This article discusses pupils' readiness for self-regulation in Exploratory Production in Technology Education. In the forethought phase of Exploratory Production, pupils envision and regulate their technological production activities. Next, in the performance phase, the envisioned goals are tried and implemented through ideating, planning and…

  20. 77 FR 30227 - Small Business Size Regulations, Small Business Innovation Research (SBIR) Program and Small...

    Science.gov (United States)

    2012-05-22

    ... Business Size Regulations, Small Business Innovation Research (SBIR) Program and Small Business Technology... public Webinar and Roundtable Meetings regarding its proposal to amend its regulations governing size and eligibility for the Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR...

  1. Acoustic Separation Technology; FINAL

    International Nuclear Information System (INIS)

    Fred Ahrens; Tim Patterson

    2002-01-01

    Today's restrictive environmental regulations encourage paper mills to close their water systems. Closed water systems increase the level of contaminants significantly. Accumulations of solid suspensions are detrimental to both the papermaking process and the final products. To remove these solids, technologies such as flotation using dissolved air (DAF), centrifuging, and screening have been developed. Dissolved Air Flotation systems are commonly used to clarify whitewater. These passive systems use high pressure to dissolve air into whitewater. When the pressure is released, air micro-bubbles form and attach themselves to fibers and particles, which then float to the surface where they are mechanically skimmed off. There is an economic incentive to explore alternatives to the DAF technology to drive down the cost of whitewater processing and minimize the use of chemicals. The installed capital cost for a DAF system is significant and a typical DAF system takes up considerable space. An alternative approach, which is the subject of this project, involves a dual method combining the advantages of chemical flocculation and in-line ultrasonic clarification to efficiently remove flocculated contaminants from a water stream

  2. Transfer of Canadian nuclear regulatory technology

    International Nuclear Information System (INIS)

    Harvie, J.D.

    1985-10-01

    This paper discusses the Canadian approach to the regulation of nuclear power reactors, and its possible application to CANDU reactors in other countries. It describes the programs which are in place to transfer information on licensing matters to egulatory agencies in other countries, and to offer training on nuclear safety regulation as it is practised in Canada. Experience to date in the transfer of regulatory technology is discussed. 5 refs

  3. Isotope production technologies from a regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murthy, K. [Canadian Nuclear Safety Committee, Ottawa, Ontario (Canada)

    2012-07-01

    This paper discusses isotope production technologies from a regulatory perspective. The regulator is the CNSC which has the mandate to protect the health, safety and security of persons and the environment and to implement Canada's international commitments on the peaceful use of nuclear energy. Nuclear facilities regulated by CNSC include linear accelerator (medical), pool irradiator (industrial) and Pelletron (research) as well as cyclotrons.

  4. Deregulation, a challenge for regulators

    International Nuclear Information System (INIS)

    Alonso, Augustin

    2001-01-01

    Deregulation and competitiveness in the electricity market invites the plant owner/operator to reduce operating cost with a potential reduction in maintenance, degradation of investment in safety, reduction of operating staff and a downgrading in research and development. On the other side, deregulation and competitiveness brings the social and industrial benefit of reducing the electricity cost. Regulatory organisations have to watch that the safety level of the plant does not go beyond the established level, while recognising the benefits of the new situation; therefore they have the moral responsibility of regulating nuclear energy effectively and efficiently and in eliminating unnecessary regulatory burdens. Regulation has evolved with time and in accordance with the knowledge gained from research and the analysis of operating experience. The knowledge gained has made it possible to follow the path of other modern advanced technologies, where risk is quantified and the system approved when the risk becomes lower than an accepted level. The regulatory use of this advanced tool is being now developed by the most advanced regulatory organisations, under the name of risk informed regulation, where the reference level is the expected frequency of core damage. Deregulation and competitiveness will not change the basis of the already well established procedure to verify compliance. Nevertheless, the contents of Safety Analysis Reports and other regulatory documents, such as Technical Specifications for Operation, offer room for improvement in the sense of being more to the roots of the matter and becoming more efficient tools in the verification process. The contents of these documents have been evolving along the time and they have become unnecessary voluminous and rather burdensome. Much work has been done to improve the efficiency of regulatory inspections by concentrating on basic aspects. As a partial application of the already mentioned risk-informed regulation

  5. Regulation of liquid metal coolant flow rate in experimental loops

    International Nuclear Information System (INIS)

    Kozlov, F.A.; Laptev, G.I.

    1987-01-01

    The possibility to use the VRT-2, RPA-T and R 133 analog temperature regulators for the automated regulation of liquid metal flow rate in the experimental loops for investigations on sodium and sodium-potassium alloy technology is considered. The RPA-T device is shown to be the most convenient one; it is characterized by the following parameters: measuring modulus transfer coefficient is 500; the range of regulating modulus proportionality factor variation - 0.3 - 50; the range of the regulating modulus intergrating time constant variation - 5 - 500 s

  6. How Technology Teachers Understand Technological Knowledge

    Science.gov (United States)

    Norström, Per

    2014-01-01

    Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

  7. International technology transfer

    International Nuclear Information System (INIS)

    Kwon, Won Gi

    1991-11-01

    This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

  8. Ultrasonication and food technology: A review

    Directory of Open Access Journals (Sweden)

    Ishrat Majid

    2015-12-01

    Full Text Available With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extraction, drying, filtration, emulsification, sterilization, cutting, etc. Ultrasound is being applied as an effective preservation tool in many food-processing fields viz. vegetables and fruits, cereal products, honey, gels, proteins, enzymes, microbial inactivation, cereal technology, water treatment, diary technology, etc. This review summarizes the latest knowledge on impact and application of ultrasound in food technology.

  9. Remarks on the german regulation of crowdfunding

    OpenAIRE

    Tröger, Tobias

    2017-01-01

    Crowdfunding is a buzzword that signifies a sub-set in the new forms of finance facilitated by advances in information technology usually categorized as fintech. Concerns for financial stability, investor and consumer protection, or the prevention of money laundering or funding of terrorism hinge incrementally on including the new techniques to initiate financing relationships adequately in the regulatory framework. This paper analyzes the German regulation of crowdinvesting and finds that it...

  10. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  11. Risk-informed regulation

    International Nuclear Information System (INIS)

    Hoffman, D.R.

    2003-01-01

    In assessing safety for nuclear facilities, regulators have traditionally used a deterministic approach. New techniques for assessing nuclear or radiological risks make it possible for regulators to incorporate risk insights into their regulations. By 'risk-informing' the regulatory processes, independent bodies tasked with protecting the health and safety of the public can focus on those design and operational issues most important to safety. Such an approach is a move away from prescriptive regulations that were based on conservative engineering judgments toward regulations focused on issues that contribute significantly to safety. Despite the availability of probabilistic risk assessment (PRA) tools, organisations often struggle with how to best use this capability. Most international regulations are still based largely on deterministic analyses that were developed without the benefit of quantitative or measurable estimates of risk. PRA considers issues of risk in a more comprehensive manner by examining a wider spectrum of initiating events and their frequency, and considers the likelihood of events in a rigorous and comprehensive manner. In some countries, nuclear regulators are actively moving toward increasing the use of risk insights in a variety of strategic arenas, including risk-informed technical specifications (operating limits and conditions), in-service inspection and testing, programs, and assessment and enforcement actions. A risk-informed approach enhances the traditional deterministic approach by explicitly considering a broader range of safety challenges, focusing resources on the basis of risk significance, considering a broader range of counter measures to mitigate challenges, and explicitly identifying and quantifying uncertainties in analyses. (author)

  12. Regulation of radioactive waste management

    International Nuclear Information System (INIS)

    2002-01-01

    This bulletin contains information about activities of the Nuclear Regulatory Authority of the Slovak Republic (UJD). In this leaflet the regulation of radioactive waste management of the UJD are presented. Radioactive waste (RAW) is the gaseous, liquid or solid material that contains or is contaminated with radionuclides at concentrations or activities greater than clearance levels and for which no use is foreseen. The classification of radioactive waste on the basis of type and activity level is: - transition waste; - short lived low and intermediate level waste (LlLW-SL); - long lived low and intermediate level waste (LlLW-LL); - high level waste. Waste management (in accordance with Act 130/98 Coll.) involves collection, sorting, treatment, conditioning, transport and disposal of radioactive waste originated by nuclear facilities and conditioning, transport to repository and disposal of other radioactive waste (originated during medical, research and industrial use of radioactive sources). The final goal of radioactive waste management is RAW isolation using a system of engineered and natural barriers to protect population and environment. Nuclear Regulatory Authority of the Slovak Republic regulates radioactive waste management in accordance with Act 130/98 Coll. Inspectors regularly inspect and evaluate how the requirements for nuclear safety at nuclear facilities are fulfilled. On the basis of safety documentation evaluation, UJD issued permission for operation of four radioactive waste management facilities. Nuclear facility 'Technologies for treatment and conditioning contains bituminization plants and Bohunice conditioning centre with sorting, fragmentation, evaporation, incineration, supercompaction and cementation. Final product is waste package (Fibre reinforced container with solidified waste) acceptable for near surface repository in Mochovce. Republic repository in Mochovce is built for disposal of short lived low and intermediate level waste. Next

  13. Epigenetic Regulation of Adipokines

    Directory of Open Access Journals (Sweden)

    Tho X. Pham

    2017-08-01

    Full Text Available Adipose tissue expansion in obesity leads to changes in the expression of adipokines, adipocyte-specific hormones that can regulate whole body energy metabolism. Epigenetic regulation of gene expression is a mechanism by which cells can alter gene expression through the modifications of DNA and histones. Epigenetic mechanisms, such as DNA methylation and histone modifications, are intimately tied to energy metabolism due to their dependence on metabolic intermediates such as S-adenosylmethionine and acetyl-CoA. Altered expression of adipokines in obesity may be due to epigenetic changes. The goal of this review is to highlight current knowledge of epigenetic regulation of adipokines.

  14. The power of regulation

    International Nuclear Information System (INIS)

    Lewis, M.G.

    1995-01-01

    Slides accompanying a presentation at The Power of Change Conference in Vancouver, BC in April 1995 about regulations affecting the power industry were presented. Issues addressed included customer choice, incentive regulation changes (price-caps, revenue sharing and pricing flexibility), the reactions of Canadian industry to regulatory changes, and anticipated reactions of the financial markets to changes in regulations. The potential effects of competition and changes that will create competition were discussed. The level of readiness of Canadian financial, ownership and regulatory bodies was discussed. The needs and expectations of investors from a new regulatory regime were quesstimated. Possible alternatives to the present regulatory framework were suggested

  15. Electrical installations and regulations

    CERN Document Server

    Whitfield, J F

    1966-01-01

    Electrical Installations and Regulations focuses on the regulations that apply to electrical installations and the reasons for them. Topics covered range from electrical science to alternating and direct current supplies, as well as equipment for providing protection against excess current. Cables, wiring systems, and final subcircuits are also considered, along with earthing, discharge lighting, and testing and inspection.Comprised of 12 chapters, this book begins with an overview of electrical installation work, traits of a good electrician, and the regulations governing installations. The r

  16. Fourteenth National Industrial Energy Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1992-01-01

    Presented are many short articles on various aspects of energy production, use, and conservation in industry. The impacts of energy efficient equipment, recycling, pollution regulations, and energy auditing are discussed. The topics covered include: New generation sources and transmission issues, superconductivity applications, integrated resource planning, electro technology research, equipment and process improvement, environmental improvement, electric utility management, and recent European technology and conservation opportunities. Individual papers are indexed separately

  17. Regulating reprogenetics: strategic sacralisation and semantic massage.

    Science.gov (United States)

    Mackenzie, Robin

    2007-12-01

    This paper forms part of the feminist critique of the regulatory consequences of biomedicine's systematic exclusion of the role of women's bodies in the development of reprogenetic technologies. I suggest that strategic use of notions of the sacred to decontextualise and delimit disagreement fosters this marginalisation. Here conceptions of the sacred and sacralisation afford a means by which pragmatic consensus over regulation may be achieved, through the deployment of a bricolage of dense images associated with cultural loyalties to solidify support or exclude contradictory elements. Hence an explicit renegotiation of the symbolic order structuring salient debates is necessary to disrupt and enrich the entrenched and exclusionary dominant discourse over reprogenetic regulation. I draw upon previous analyses of strategic rhetoric associated with the regulation of infertility treatment and embryo research in the United Kingdom, the cultural anthropology of biomedicine and feminist ethnographies of reprogenetics to illustrate these claims.

  18. How can we characterize nano-specific soft regulation? Lessons from occupational health and safety governance

    NARCIS (Netherlands)

    Reichow, Aline; Dorbeck-Jung, Barbel R.; Konrad, Kornelia; Coenen, Christopher; Dijkstra, Anne; Milburn, Colin; van Lente, Harro

    2013-01-01

    Soft regulation is a widely used instrument in the governance of emerging technologies, especially in the governance of nanotechnologies. So far, evaluations on the effects of nano-specific soft regulation cannot build on a coherent and consistent typology. Characterization of soft regulation is

  19. Legislation and regulation

    International Nuclear Information System (INIS)

    1998-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 3 of the document contains some details about the Brazilian legislation and regulation, the nuclear and environmental licensing, and emergency preparedness legislation

  20. Benchmarking and Regulation

    DEFF Research Database (Denmark)

    Agrell, Per J.; Bogetoft, Peter

    . The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

  1. Legislation and regulation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 3 of the document contains some details about the Brazilian legislation and regulation, the nuclear and environmental licensing, and emergency preparedness legislation.

  2. The regulation of appetite

    OpenAIRE

    Druce, M; Bloom, S R

    2006-01-01

    The worsening global obesity epidemic, particularly the increase in childhood obesity, has prompted research into the mechanisms of appetite regulation. Complex pathways modulate energy balance, involving appetite centres in the hypothalamus and brain stem, and hormonal signals of energy status released by the gut and by the periphery. Better understanding of appetite regulation improves understanding of the aetiology of obesity. Manipulation of this homoeostatic system offers potentially use...

  3. Corruption, Institutions and Regulation

    OpenAIRE

    Michael Breen; Robert Gillanders

    2011-01-01

    We analyze the effects of corruption and institutional quality on the quality of business regulation. Our key findings indicate that corruption negatively aspects the quality of regulation and that general institutional quality is insignificant once corruption is controlled for. These findings hold over a number of specifications which include additional exogenous historical and geographic controls. The findings imply that policy-makers should focus on curbing corruption to improve regulat...

  4. Regulating deregulated energy markets

    International Nuclear Information System (INIS)

    Jackson, M.

    2002-01-01

    The North American gas and electricity markets are fast evolving, and regulators are currently faced with a host of issues such as market-based rates, unbundling, stranded costs, open access, and incentive regulation are surfacing as a result of deregulation. The regulatory environment in Ontario was reviewed by the author. Deregulated markets rule, from commodities to gas and electricity. Additionally, there is an evolution of traditional utility regulation. A look at deregulated markets revealed that there are regulations on boundary conditions on the deregulated market. Under the Ontario Energy Board (OEB), all generators, transmitters, distributors, and retailers of electricity must be licensed. The standard supply service (SSS) offered by electricity distributors and system gas which is still being sold by natural gas distributors continues to be regulated by OEB. One issue that was addressed was separation for revenues and costs of the utility's purchase and sale of gas business, at least for accounting purposes. The next issue discussed was cost of system gas and SSS, followed by timely signals and prudent incurred costs. Historical benefits were reviewed, such as historical commitments to low-cost electricity. Pooling transportation costs, transmission pricing continued, market-based rates, unbundling, stranded costs, open access, incentive regulation/ performance based regulation (PBR) were all discussed. Price cap on PBR, both partial and comprehensive were looked at. A requirement to review guidelines on cost of capital and an application to extend blanket approval provisions for gas storage were discussed, as they are amongst some of the challenges of the future. Other challenges include revised rules and practice and procedure; practice directions for cost awards, appeals, and other functions; confidentiality guidelines; and refinements to the role of and approaches to alternative dispute resolution. The future role of regulators was examined in light

  5. 48 CFR 3004.470 - Security requirements for access to unclassified facilities, Information Technology resources...

    Science.gov (United States)

    2010-10-01

    ... access to unclassified facilities, Information Technology resources, and sensitive information. 3004.470... Technology resources, and sensitive information. ... ACQUISITION REGULATION (HSAR) GENERAL ADMINISTRATIVE MATTERS Safeguarding Classified and Sensitive Information...

  6. Interpersonal emotion regulation.

    Science.gov (United States)

    Zaki, Jamil; Williams, W Craig

    2013-10-01

    Contemporary emotion regulation research emphasizes intrapersonal processes such as cognitive reappraisal and expressive suppression, but people experiencing affect commonly choose not to go it alone. Instead, individuals often turn to others for help in shaping their affective lives. How and under what circumstances does such interpersonal regulation modulate emotional experience? Although scientists have examined allied phenomena such as social sharing, empathy, social support, and prosocial behavior for decades, there have been surprisingly few attempts to integrate these data into a single conceptual framework of interpersonal regulation. Here we propose such a framework. We first map a "space" differentiating classes of interpersonal regulation according to whether an individual uses an interpersonal regulatory episode to alter their own or another person's emotion. We then identify 2 types of processes--response-dependent and response-independent--that could support interpersonal regulation. This framework classifies an array of processes through which interpersonal contact fulfills regulatory goals. More broadly, it organizes diffuse, heretofore independent data on "pieces" of interpersonal regulation, and identifies growth points for this young and exciting research domain.

  7. Federal Aviation Regulations - National Aviation Regulations of Russia

    Science.gov (United States)

    Chernykh, O.; Bakiiev, M.

    2018-03-01

    Chinese Aerospace Engineering is currently developing cooperation with Russia on a wide-body airplane project that has directed the work towards better understanding of Russian airworthiness management system. The paper introduces national Aviation regulations of Russia, presents a comparison of them with worldwide recognized regulations, and highlights typical differences. They have been found to be: two general types of regulations used in Russia (Aviation Regulations and Federal Aviation Regulations), non-unified structure of regulations on Aircraft Operation management, various separate agencies responsible for regulation issuance instead of one national aviation authority, typical confusions in references. The paper also gives a list of effective Russian Regulations of both types.

  8. Heterogeneous Policies, Heterogeneous Technologies: The Case of Renewable Energy

    International Nuclear Information System (INIS)

    Nicolli, Francesco; Vona, Francesco

    2014-07-01

    This paper investigates empirically the effect of market regulation and renewable energy policies on innovation activity in different renewable energy technologies. For the EU countries and the years 1980 to 2007, we built a unique dataset containing information on patent production in eight different technologies, proxies of market regulation and technology-specific renewable energy policies. Our main findings show that lowering entry barriers is a more significant driver of renewable energy innovation than privatisation and un-bundling, but its effect varies across technologies, being stronger in technologies characterised by the potential entry of small, independent power producers. Additionally, the inducement effect of renewable energy policies is heterogeneous and more pronounced for wind, which is the only technology that is mature and has high technological potential. Finally, the ratification of the Kyoto protocol - determining a more stable and less uncertain policy framework - amplifies the inducement effect of both energy policy and market liberalisation. (authors)

  9. Review of automated vehicle technology : policy and implementation implications.

    Science.gov (United States)

    2016-03-14

    The goals of this project were to undergo a systematic review of automated vehicle technologies with a focus on policy : implications, methods of implementation, regulation by states, and developments occurring on legal fronts, ultimately creating a ...

  10. Wireless communication technologies in distribution automation

    Energy Technology Data Exchange (ETDEWEB)

    Takala, J. [VTT Energy, Espoo (Finland)

    1996-12-31

    The project examines four different wireless communication technologies: GSM short message service, NMT data calls, packet radio network, Autonet (Actionet) status message service. The targets for communication include: energy measurement, especially in the de-regulated electricity market, secondary sub-station control, fault indicators. The research concentrates on the usability of different communication technologies for different purposes. Data about response times, error rates, retry times, communication delays, costs etc. will be collected for each communication technology and comparative results will be obtained. Some field experiments and demonstrations will be made in energy measurement and distribution network remote control. The project is divided in four tasks. Each task is described briefly

  11. Clean coal technology roadmap: issues paper

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, B. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre

    2003-07-01

    The need for the Clean Coal Technology Roadmap is based on the climate change threat, Canada's commitment to the Kyoto protocol, and the need to keep options open in determining the future position of coal in Canada's energy mix. The current role of coal, issues facing coal-fired utilities, and greenhouse gas emission policies and environmental regulations are outlined. The IEA energy outlook (2002) and a National Energy Board draft concerning Canada's energy future are outlined. Environmental, market, and technical demands facing coal, technology options for existing facilities, screening new developments in technology, and clean coal options are considered. 13 figs. 5 tabs.

  12. Wireless communication technologies in distribution automation

    Energy Technology Data Exchange (ETDEWEB)

    Takala, J [VTT Energy, Espoo (Finland)

    1997-12-31

    The project examines four different wireless communication technologies: GSM short message service, NMT data calls, packet radio network, Autonet (Actionet) status message service. The targets for communication include: energy measurement, especially in the de-regulated electricity market, secondary sub-station control, fault indicators. The research concentrates on the usability of different communication technologies for different purposes. Data about response times, error rates, retry times, communication delays, costs etc. will be collected for each communication technology and comparative results will be obtained. Some field experiments and demonstrations will be made in energy measurement and distribution network remote control. The project is divided in four tasks. Each task is described briefly

  13. Nuclear regulation in transition

    International Nuclear Information System (INIS)

    Tomain, J.P.

    1986-01-01

    The current state of nuclear regulations in the USA is examined. Since Three Mile Island the regulation of the nuclear power industry has been undergoing a noticeable transition. It will be argued here that the transition is characterized by two indicia. First, the primary focus of state and federal regulators has been on the financial aspects of the industry: this is best seen in the context of decisions allocating the costs of nuclear plant cancellations. Second, decisionmaking power has been decentralized: although the regulatory history of nuclear power demonstrates the tradition of centralized decisionmaking power (i.e., formerly the primary decisionmaking body was the Atomic Energy Commission), now States share decisionmaking power with the Nuclear Regulatory Commission. In Section 1 a brief legislative history of nuclear regulation is presented to establish the assertion that nuclear regulation, both de jure and de facto, was centralized. Next, Section 2 canvasses recent United States Supreme Court opinions regarding nuclear regulation. The Court frequently acts as policymaker through the consequences of its opinions, if not by its intent. In the area of nuclear policymaking, the Court has paid allegiance recently both to the tradition of centralization and to the movement toward decentralization. This dualism is reflected in other federal court decisions as well which will be briefly mentioned. Continuing the analysis of Federal regulation, Section 3 examines the current reform efforts of the NRC. Section 4 presents an examination of State responses to nuclear plant cancellations. In this section, State administrative agency and court decisions will be examined and recent State legislation will be discussed. (author)

  14. Nuclear regulation in transition

    Energy Technology Data Exchange (ETDEWEB)

    Tomain, J.P. (Cincinnati Univ., OH, US. Coll. of Law)

    1986-01-01

    The current state of nuclear regulations in the USA is examined. Since Three Mile Island the regulation of the nuclear power industry has been undergoing a noticeable transition. It will be argued here that the transition is characterized by two indicia. First, the primary focus of state and federal regulators has been on the financial aspects of the industry: this is best seen in the context of decisions allocating the costs of nuclear plant cancellations. Second, decisionmaking power has been decentralized: although the regulatory history of nuclear power demonstrates the tradition of centralized decisionmaking power (i.e., formerly the primary decisionmaking body was the Atomic Energy Commission), now States share decisionmaking power with the Nuclear Regulatory Commission. In Section 1 a brief legislative history of nuclear regulation is presented to establish the assertion that nuclear regulation, both de jure and de facto, was centralized. Next, Section 2 canvasses recent United States Supreme Court opinions regarding nuclear regulation. The Court frequently acts as policymaker through the consequences of its opinions, if not by its intent. In the area of nuclear policymaking, the Court has paid allegiance recently both to the tradition of centralization and to the movement toward decentralization. This dualism is reflected in other federal court decisions as well which will be briefly mentioned. Continuing the analysis of Federal regulation, Section 3 examines the current reform efforts of the NRC. Section 4 presents an examination of State responses to nuclear plant cancellations. In this section, State administrative agency and court decisions will be examined and recent State legislation will be discussed.

  15. Rejecting New Technology: The Case of Genetically Modified Wheat

    OpenAIRE

    Derek Berwald; Colin A. Carter; Guillaume P. Gruère

    2006-01-01

    Canada has stringent regulations covering the release of new wheat varieties, but the United States has virtually no regulations in this area. Monsanto Co. developed genetically modified (GM) spring wheat for North America, and made a commitment to the U.S. industry to release this new technology simultaneously in both Canada and the United States, or not at all. The Canadian regulatory bias against new varieties acted as a veto against GM wheat and caused Monsanto to shelve the technology in...

  16. Handling the Misalignment of Interests in Assisted Reproductive Technology Practices

    OpenAIRE

    Pierson, Anne

    2010-01-01

    One of the major problems we see in the use of reproductive technology at this time is that there is very little regulation of embryo transfer practices that lead to multigestational pregnancies. While the FDA must approve assisted reproductive technology (ART) devices and drugs that stimulate ovulation, it has no jurisdiction over the practice of medicine, how these drugs and devices are used on the ground, often in off-label procedures. The only current regulation of these practices is at...

  17. Regulating ICT convergence

    OpenAIRE

    Simpson, Seamus

    2015-01-01

    The Broadcasting, Information Technology and Telecommunications sectors have in recent years been the subject of notable transformation, one important feature of which is their coming closer together in a number of ways - it is now commonplace to speak of a new hybrid sector, Information and Communications Technologies (ICTs). This convergence is of considerable interest to policy-makers in industry and government at the national and international level, as well as the academic community and,...

  18. Veterinary Medicine and Animal Health Technology Handbook.

    Science.gov (United States)

    New York State Education Dept., Albany. Office of the Professions.

    The laws, rules, and regulations of the New York State Education Department that govern professional veterinary medicine and animal health technology practice in the state are presented. Licensure requirements are described, and complete application forms and instructions for obtaining license and first registration as a licensed veterinarian and…

  19. Plasma technology directory

    International Nuclear Information System (INIS)

    Ward, P.P.; Dybwad, G.L.

    1995-01-01

    The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling

  20. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  1. Regulating interface science healthcare products: myths and uncertainties.

    Science.gov (United States)

    Bravery, Christopher A

    2010-12-06

    Whenever new technology emerges it brings with it concerns and uncertainties about whether or how it will need to be regulated, particularly when it is applied to human healthcare. Drawing on the recent history in the European Union (EU) of the regulation of cell-based medicinal products, and in particular tissue-engineered products, this paper explores the myths that persist around their regulation and speculates on whether the existing regulatory landscape in the EU is flexible enough to incorporate nanotechnology and other new technologies into healthcare products. By untangling these myths a number of clear conclusions are revealed that, when considered in the context of risk-benefit, make it clear that what hinders the uptake of new technology is not regulatory process but basic science.

  2. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  3. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  4. To regulate or not to regulate?

    Energy Technology Data Exchange (ETDEWEB)

    Mason, G.; Wrixon, A. [IAEA, Vienna (Austria)

    2006-07-01

    Full text of publication follows: In Hamlet famous soliloquy to be or not to be, he wrestles with the perennial human problem of choosing the right course of action in difficult circumstances. In recent years, we have witnessed a cast of thousands playing out a long-running scene that seems to echo Hamlet dilemma on a rather more prosaic level. When is it necessary to apply regulations to the control of exposure to ionizing radiation and when is regulatory control not warranted? This seemingly straightforward question has brought out the philosopher, ethician, lawyer, pragmatist, orator in simple radiation protection folk and has led to passionate debate on numerous occasions. This paper attempts an answer based on a review of recent developments. For deciding when to apply regulatory controls, several concepts have evolved over time, including exemption of practices and sources, exclusion of exposures and clearance of materials. These have different origins, purposes and characteristics. Exemption and clearance have often been associated with triviality of risk, while exclusion has been related to un-amenability of control. For each concept, criteria have been developed to assist the regulator in reaching a decision, but there has much disputation over numerical values. This paper briefly reviews and analyses recent developments and attempts to clarify the problem from first principles. The conclusion is that the underlying issue in each case is to determine when regulatory controls become unwarranted: that is, when the societal resources expended in applying them and complying with them would be disproportionate to any benefit they might bring. This is a natural extension of the principle of optimization of protection to the regulatory control of protection, in the context of exposure to radiation at very low levels. It also reflects common expectations of good governance: wise management of finite societal resources and avoidance of unwarranted controls on

  5. To regulate or not to regulate?

    International Nuclear Information System (INIS)

    Mason, G.; Wrixon, A.

    2006-01-01

    Full text of publication follows: In Hamlet famous soliloquy to be or not to be, he wrestles with the perennial human problem of choosing the right course of action in difficult circumstances. In recent years, we have witnessed a cast of thousands playing out a long-running scene that seems to echo Hamlet dilemma on a rather more prosaic level. When is it necessary to apply regulations to the control of exposure to ionizing radiation and when is regulatory control not warranted? This seemingly straightforward question has brought out the philosopher, ethician, lawyer, pragmatist, orator in simple radiation protection folk and has led to passionate debate on numerous occasions. This paper attempts an answer based on a review of recent developments. For deciding when to apply regulatory controls, several concepts have evolved over time, including exemption of practices and sources, exclusion of exposures and clearance of materials. These have different origins, purposes and characteristics. Exemption and clearance have often been associated with triviality of risk, while exclusion has been related to un-amenability of control. For each concept, criteria have been developed to assist the regulator in reaching a decision, but there has much disputation over numerical values. This paper briefly reviews and analyses recent developments and attempts to clarify the problem from first principles. The conclusion is that the underlying issue in each case is to determine when regulatory controls become unwarranted: that is, when the societal resources expended in applying them and complying with them would be disproportionate to any benefit they might bring. This is a natural extension of the principle of optimization of protection to the regulatory control of protection, in the context of exposure to radiation at very low levels. It also reflects common expectations of good governance: wise management of finite societal resources and avoidance of unwarranted controls on

  6. The undertow of de-regulation : re-regulation

    International Nuclear Information System (INIS)

    Bradford, J.A.

    2003-01-01

    Alberta, Ontario and New Brunswick each initiated steps to deregulate their electric power industries in order to remain competitive with lower electricity rates in certain American states where the industry was also moving towards deregulation. This paper considers how the original sweep of deregulation policy goals succumbed to electricity re regulation policies. The decision by British Columbia to re-examine its deregulation plans in light of the experience in Canada's 3 other province's was also examined. The paper describes the electric power industry from 1900 to 1960s, before the deregulation wave hit the industry and then proceeds to the 1970s which was marked by the oil embargo. The 1980s saw a new era of policy shifts towards deregulation and privatization activity which was intended to introduce competition into regulated industries. Technological advances were taking place in the electricity sector, improving the viability of small gas turbines and making cogeneration possible. In the 1990s, Alberta was the first Canadian province to introduce competition to its electricity industry in an effort to remain competitive with neighbouring U.S. jurisdictions. By the 1990s Ontario's vertically integrated electricity industry was in trouble and recommendations were made to dissolve Ontario's Hydro One monopoly, particularly in power generation. In 1999, New Brunswick restructured its electricity industry to remain competitive with New England's electricity industry. The paper describes the gradual pull back from deregulation by all three provinces and the measures taken to impose price controls. Both industry and consumers paid a price for major policy changes. Complete competition in New Brunswick never materialized. It was suggested that controlled competition will likely move the electricity industry in the future. 40 refs

  7. Economic impact of potential NORM regulations

    International Nuclear Information System (INIS)

    Smith, G.E.; Fitzgibbon, T.; Karp, S.

    1995-01-01

    Oil and gas field wastes and sites contaminated with naturally occurring radioactive materials (NORM) have quickly become a focus of substantial attention by regulators both at the state and federal level. Although currently regulated in a number of states, the Environmental Protection Agency (EPA) has indicated a desire to develop federal regulations to address management and disposal of NORM-contaminated wastes. This paper provides a brief overview of current state NORM regulations, currently available technologies for managing and disposing NORM wastes, and the cost of employing these techniques. Based on these characterizations and alternative assumptions about the volume of NORM wastes, four alternative scenarios have been developed to bracket potential future NORM requirements. These scenarios have been used is the basis for an analysis of the potential economic and supply impacts of NORM requirements on the U.S. oil and gas industry. The results illustrate that a reasonable approach to regulation that focuses only on those NORM wastes that pose a risk and allows producers to use safe, low cost disposal methods (downhole or other) would have minimal economic impacts on the oil and gas industry. A very stringent regulatory approach that covered large volumes of wastes, required the use of higher cost disposal techniques, and required extensive site clean-up activities could have a substantial economic impact, resulting in a loss of up to 20 percent of U.S. oil production and 8 percent of U.S. gas production by 2000. The costs of compliance with these alternative approaches could range from $71 million to over $14 billion annually. Between these two cases lies the opportunity for regulators to develop requirements for management and disposal of NORM wastes that will address any environmental and human health risks posed at industry sites without imposing unnecessarily costly regulations on the U.S. oil and gas E ampersand P industry

  8. Technology of environmental pollution control

    International Nuclear Information System (INIS)

    Shaheen, E.I.

    1992-01-01

    This book aims to be a comprehensive reference for technological advances in pollution control and abatement and pollution regulations. The first chapter, 'The dilemma of environmental pollution' summarises pollution legislation in the United States and discusses worldwide interest in pollution abatement. Chapter 2 describes some recent environmental disasters and discusses the major air pollutants and their harmful effects. Chapters 3 and 4 assess the various techniques for air pollution control and water pollution control. Chapter 5 is devoted to oil pollution impact and abatement. Solid waste management and methods of solid waste disposal are discussed in chapter 6, and noise pollution, its harmful effects and its control are dealt within chapter 7. Appendices contain a glossary, a summary of the US Clean Air Act and the US drinking water regulations and reference figures and tables relating to energy and the environment. Individual chapters contain many references

  9. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

  10. Current state and trend of radiation regulation system in Japan

    International Nuclear Information System (INIS)

    Yonehara, Hidenori

    2004-01-01

    Japanese regulation system for safety against radiation essentially started from 'Atomic Energy Basic Law' enacted in 1955 and 'Law Concerning Prevention of Radiation Hazards due to Radioisotopes, etc' enacted in 1957, has been regarded as a central rule for radiation protection and safety. Related laws and regulations have been enacted together with their revision. Radiation Council, established in the Science and Technology Agency in 1962 and now belonging to the Ministry of Education, Culture, Sports, Science and Technology, has deliberated basically on International Commission of Radiological Protection (ICRP) statements for legal revision and has set up working groups for current problems. Activities of the groups have concerned ICRP Publication 60 (1990) and later related publications for incorporating the principle into laws as to concepts of dose limits, effective dose, and then of exemption and exclusion. International status of the Japanese regulation, problems and tasks in the regulation are also commented. (N.I.)

  11. Staff rules and regulations

    CERN Multimedia

    HR Department

    2007-01-01

    The 11th edition of the Staff Rules and Regulations, dated 1 January 2007, adopted by the Council and the Finance Committee in December 2006, is currently being distributed to departmental secretariats. The Staff Rules and Regulations, together with a summary of the main modifications made, will be available, as from next week, on the Human Resources Department's intranet site: http://cern.ch/hr-web/internal/admin_services/rules/default.asp The main changes made to the Staff Rules and Regulations stem from the five-yearly review of employment conditions of members of the personnel. The changes notably relate to: the categories of members of the personnel (e.g. removal of the local staff category); the careers structure and the merit recognition system; the non-residence, installation and re-installation allowances; the definition of family, family allowances and family-related leave; recognition of partnerships; education fees. The administrative circulars, some of which are being revised following the ...

  12. Deciphering Transcriptional Regulation

    DEFF Research Database (Denmark)

    Valen, Eivind

    The myriad of cells in the human body are all made from the same blueprint: the human genome. At the heart of this diversity lies the concept of gene regulation, the process in which it is decided which genes are used where and when. Genes do not function as on/off buttons, but more like a volume...... mostly near the start of the gene known as the promoter. This region contains patterns scattered in the DNA that the TFs can recognize and bind to. Such binding can prompt the assembly of the pre-initiation complex which ultimately leads to transcription of the gene. In order to achieve the regulation...... on what characterizes a hippocampus promoter. Pairing CAGE with TF binding site prediction we identi¿ed a likely key regulator of hippocampus. Finally, we developed a method for CAGE exploration. While the DeepCAGE library characterized a full 1.4 million transcription initiation events it did not capture...

  13. Radiation emitting devices regulations

    International Nuclear Information System (INIS)

    1970-01-01

    The Radiation Emitting Devices Regulations are the regulations referred to in the Radiation Emitting Devices Act and relate to the operation of devices. They include standards of design and construction, standards of functioning, warning symbol specifications in addition to information relating to the seizure and detention of machines failing to comply with the regulations. The radiation emitting devices consist of the following: television receivers, extra-oral dental x-ray equipment, microwave ovens, baggage inspection x-ray devices, demonstration--type gas discharge devices, photofluorographic x-ray equipment, laser scanners, demonstration lasers, low energy electron microscopes, high intensity mercury vapour discharge lamps, sunlamps, diagnostic x-ray equipment, ultrasound therapy devices, x-ray diffraction equipment, cabinet x-ray equipment and therapeutic x-ray equipment

  14. Natural Gas Regulation

    International Nuclear Information System (INIS)

    1995-01-01

    The regulation of Natural Gas. Natural gas Regulation clarifies and consolidates the legal and institutional framework for development of the industry through six principal elements: 1) Establishment of a vision of the industry. 2) Development of regulatory objectives. 3) Determination of relationships among industry participants. 4) Clear specification of the role of PEMEX in the industry. 5) Definition of the functions of the Regulatory authority. 6) Creation of a transition regime. In parallel with the development of the substantive legal framework, the law of the Comision Reguladora de Energia (CRE) was also enacted by Congress in October 1995 to strength the institutional framework and implement the legal changes. This law defines the CRE as an agency of the Energy Ministry with technical, operational, and budgetary autonomy, and responsibility for implementing natural gas industry regulation. (Author)

  15. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume...... but are also essential for a number of physiological processes such as proliferation, controlled cell death, migration and endocrinology. The thesis have been focusing on two Channels, namely the swelling activated Cl- channel (ICl, swell) and the transient receptor potential Vanilloid (TRPV4) channel. I: Cl......- serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...

  16. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  17. Nuclear regulations: current status and proposed initiatives

    International Nuclear Information System (INIS)

    Domondon, D.B.; Valdezco, E.M.; Mateo, A.J.; Parami, V.K.

    1996-01-01

    The science Act of 1958 created the Philippine Atomic Energy Commission, presently known as the Philippine Nuclear Research Institute (PNRI), under the Department of Science and Technology (DOST). The PNRI is tasked with the dual role of promotion and control of the peaceful applications of atomic energy. To carry its mandate of regulation and control on the use of raioisotopes in various fields, the PNRI had promulgated and issued specific regulations known as the Code of PNRI regulations. This paper summarizes the activities undertaken by PNRI in the continuing process of review and subsequent revisions of the Code of PNRI regulations and related guidance documents. It highlights proposed modifications in the present regulations in an attempt to adopt the new international basic safety standards, the practical problems and related issues attendant to the implementation of these new standards, among others. In line with the overall objective of PNRI to ensure the safe application of nuclear energy and radiation technology in various fields, the institute conducted a series of regulatory information conferences to provide an opportunity for members of the regulatory staff of the PNRI and licenses to discuss safety initiatives and regulatory issues. This paper will also provide an in-depth assessment of the lessons learned from these conferences which were conducted by sector or by specific applications for a more focused approach, e.g. radiopharmaceuticals, industrial radiography, research, among others. Licensees' feedback on the PNRI regulatory process are presented as part of the overall objective of enhancing the operational experiences of the licensing, review and evaluation group as well as that of inspection, enforcement and compliance. Several proposed initiatives for consideration of the PNRI to further strengthen its regulatory functions are also briefly outlined. (author)

  18. QUANTITATIVE ANALYSIS OF FLUX REGULATION THROUGH HIERARCHICAL REGULATION ANALYSIS

    NARCIS (Netherlands)

    van Eunen, Karen; Rossell, Sergio; Bouwman, Jildau; Westerhoff, Hans V.; Bakker, Barbara M.; Jameson, D; Verma, M; Westerhoff, HV

    2011-01-01

    Regulation analysis is a methodology that quantifies to what extent a change in the flux through a metabolic pathway is regulated by either gene expression or metabolism. Two extensions to regulation analysis were developed over the past years: (i) the regulation of V(max) can be dissected into the

  19. Quantitative analysis of flux regulation through hierarchical regulation analysis

    NARCIS (Netherlands)

    Eunen, K. van; Rossell, S.; Bouwman, J.; Westerhoff, H.V.; Bakker, B.M.

    2011-01-01

    Regulation analysis is a methodology that quantifies to what extent a change in the flux through a metabolic pathway is regulated by either gene expression or metabolism. Two extensions to regulation analysis were developed over the past years: (i) the regulation of Vmax can be dissected into the

  20. The Impact of Regulating Social Science Research with Biomedical Regulations

    Science.gov (United States)

    Durosinmi, Brenda Braxton

    2011-01-01

    The Impact of Regulating Social Science Research with Biomedical Regulations Since 1974 Federal regulations have governed the use of human subjects in biomedical and social science research. The regulations are known as the Federal Policy for the Protection of Human Subjects, and often referred to as the "Common Rule" because 18 Federal…

  1. Energy technologies and energy efficiency in economic modelling

    DEFF Research Database (Denmark)

    Klinge Jacobsen, Henrik

    1998-01-01

    This paper discusses different approaches to incorporating energy technologies and technological development in energy-economic models. Technological development is a very important issue in long-term energy demand projections and in environmental analyses. Different assumptions on technological ...... of renewable energy and especially wind power will increase the rate of efficiency improvement. A technologically based model in this case indirectly makes the energy efficiency endogenous in the aggregate energy-economy model....... technological development. This paper examines the effect on aggregate energy efficiency of using technological models to describe a number of specific technologies and of incorporating these models in an economic model. Different effects from the technology representation are illustrated. Vintage effects...... illustrates the dependence of average efficiencies and productivity on capacity utilisation rates. In the long run regulation induced by environmental policies are also very important for the improvement of aggregate energy efficiency in the energy supply sector. A Danish policy to increase the share...

  2. Possibilities for global governance of converging technologies

    Science.gov (United States)

    Roco, Mihail C.

    2008-01-01

    The convergence of nanotechnology, modern biology, the digital revolution and cognitive sciences will bring about tremendous improvements in transformative tools, generate new products and services, enable opportunities to meet and enhance human potential and social achievements, and in time reshape societal relationships. This paper focuses on the progress made in governance of such converging, emerging technologies and suggests possibilities for a global approach. Specifically, this paper suggests creating a multidisciplinary forum or a consultative coordinating group with members from various countries to address globally governance of converging, emerging technologies. The proposed framework for governance of converging technologies calls for four key functions: supporting the transformative impact of the new technologies; advancing responsible development that includes health, safety and ethical concerns; encouraging national and global partnerships; and establishing commitments to long-term planning and investments centered on human development. Principles of good governance guiding these functions include participation of all those who are forging or affected by the new technologies, transparency of governance strategies, responsibility of each participating stakeholder, and effective strategic planning. Introduction and management of converging technologies must be done with respect for immediate concerns, such as privacy, access to medical advancements, and potential human health effects. At the same time, introduction and management should also be done with respect for longer-term concerns, such as preserving human integrity, dignity and welfare. The suggested governance functions apply to four levels of governance: (a) adapting existing regulations and organizations; (b) establishing new programs, regulations and organizations specifically to handle converging technologies; (c) building capacity for addressing these issues into national policies and

  3. Possibilities for global governance of converging technologies

    International Nuclear Information System (INIS)

    Roco, Mihail C.

    2008-01-01

    The convergence of nanotechnology, modern biology, the digital revolution and cognitive sciences will bring about tremendous improvements in transformative tools, generate new products and services, enable opportunities to meet and enhance human potential and social achievements, and in time reshape societal relationships. This paper focuses on the progress made in governance of such converging, emerging technologies and suggests possibilities for a global approach. Specifically, this paper suggests creating a multidisciplinary forum or a consultative coordinating group with members from various countries to address globally governance of converging, emerging technologies. The proposed framework for governance of converging technologies calls for four key functions: supporting the transformative impact of the new technologies; advancing responsible development that includes health, safety and ethical concerns; encouraging national and global partnerships; and establishing commitments to long-term planning and investments centered on human development. Principles of good governance guiding these functions include participation of all those who are forging or affected by the new technologies, transparency of governance strategies, responsibility of each participating stakeholder, and effective strategic planning. Introduction and management of converging technologies must be done with respect for immediate concerns, such as privacy, access to medical advancements, and potential human health effects. At the same time, introduction and management should also be done with respect for longer-term concerns, such as preserving human integrity, dignity and welfare. The suggested governance functions apply to four levels of governance: (a) adapting existing regulations and organizations; (b) establishing new programs, regulations and organizations specifically to handle converging technologies; (c) building capacity for addressing these issues into national policies and

  4. Possibilities for global governance of converging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Roco, Mihail C. [National Science Foundation (NSF) (United States)], E-mail: mroco@nsf.gov

    2008-01-15

    The convergence of nanotechnology, modern biology, the digital revolution and cognitive sciences will bring about tremendous improvements in transformative tools, generate new products and services, enable opportunities to meet and enhance human potential and social achievements, and in time reshape societal relationships. This paper focuses on the progress made in governance of such converging, emerging technologies and suggests possibilities for a global approach. Specifically, this paper suggests creating a multidisciplinary forum or a consultative coordinating group with members from various countries to address globally governance of converging, emerging technologies. The proposed framework for governance of converging technologies calls for four key functions: supporting the transformative impact of the new technologies; advancing responsible development that includes health, safety and ethical concerns; encouraging national and global partnerships; and establishing commitments to long-term planning and investments centered on human development. Principles of good governance guiding these functions include participation of all those who are forging or affected by the new technologies, transparency of governance strategies, responsibility of each participating stakeholder, and effective strategic planning. Introduction and management of converging technologies must be done with respect for immediate concerns, such as privacy, access to medical advancements, and potential human health effects. At the same time, introduction and management should also be done with respect for longer-term concerns, such as preserving human integrity, dignity and welfare. The suggested governance functions apply to four levels of governance: (a) adapting existing regulations and organizations; (b) establishing new programs, regulations and organizations specifically to handle converging technologies; (c) building capacity for addressing these issues into national policies and

  5. A Review of Fintech Regulations in China, Singapore, and Hong Kong

    OpenAIRE

    Chee Yuen Yew; Ameen Talib

    2018-01-01

    The world has transformed from traditional business model into digitalised business model, financial services as well. As financial sector is strictly regulated by worldwide regulator in the past, there’s the dilemma on the regulation in the combination of Financial Technology (“Fintech”). This paper has selected three samples of emerging countries in Asia to examine the current regulations development. In the end of the paper, there is a comparison of regulatory framework between the samples...

  6. Public regulators and CSR

    DEFF Research Database (Denmark)

    Buhmann, Karin

    2016-01-01

    The social licence to operate (SLO) concept is little developed in the academic literature so far. Deployment of the term was made by the United National (UN) Guiding Principles on Business and Human Rights and the UN ‘Protect, Respect and Remedy’ Framework, which apply SLO as an argument...... for responsible business conduct, connecting to social expectations and bridging to public regulation. This UN guidance has had a significant bearing on how public regulators seek to influence business conduct beyond Human Rights to broader Corporate Social Responsibility (CSR) concerns. Drawing on examples...

  7. Collaborative Tax Regulation

    DEFF Research Database (Denmark)

    Boll, Karen

    2016-01-01

    This article shows a new form of regulation within a tax administration where tax administrators abate tax evasion by nudging and motivating consumers to only purchase services from tax compliant businesses. This indirectly closes or forces tax evading businesses to change their practices, because...... stakeholders, i.e. the consumers, in the regulatory craft. The study is based on a qualitative methodology and draws on a unique case of regulation in the cleaning sector. This sector is at high risk of tax evasion and human exploitation of vulnerable workers operating in the informal economy. The article has...

  8. Public regulators and CSR

    DEFF Research Database (Denmark)

    Buhmann, Karin

    2016-01-01

    of such public regulatory governance, this article explores and explains developments towards a juridification of CSR entailing efforts by public regulators to reach beyond jurisdictional and territorial limitations of conventional public law to address adverse effects of transnational economic activity. Through...... analysis of an expansion of law into the normative framing of what constitutes responsible business conduct, we demonstrate a process of juridification entailing a legal framing of social expectations of companies, a proliferation of law into the field of business ethics, and an increased regulation by law...

  9. Nuclear regulations and environment

    International Nuclear Information System (INIS)

    Oliveira, Antonio A.

    2001-01-01

    After an historical overview of the nuclear regulation system in Argentina a description is made of the country's Nuclear Regulatory Authority (ARN) and of its regulation and control functions. Its organic structure is also outlined. A detailed report is given of the environmental monitoring activities in the sites of the operating Argentine nuclear power plants as well as those of the nuclear research centres. A special reference is made of the monitoring of the relevant uranium mining districts in Argentina. The radon determination in houses of several regions of the country is also mentioned

  10. Nuclear regulation and safety

    International Nuclear Information System (INIS)

    Hendrie, J.M.

    1982-01-01

    Nuclear regulation and safety are discussed from the standpoint of a hypothetical country that is in the process of introducing a nuclear power industry and setting up a regulatory system. The national policy is assumed to be in favor of nuclear power. The regulators will have responsibility for economic, reliable electric production as well as for safety. Reactor safety is divided into three parts: shut it down, keep it covered, take out the afterheat. Emergency plans also have to be provided. Ways of keeping the core covered with water are discussed

  11. Regulated underground storage tanks

    International Nuclear Information System (INIS)

    1992-06-01

    This guidance package is designed to assist DOE Field operations by providing thorough guidance on the underground storage tank (UST) regulations. [40 CFR 280]. The guidance uses tables, flowcharts, and checklists to provide a ''roadmap'' for DOE staff who are responsible for supervising UST operations. This package is tailored to address the issues facing DOE facilities. DOE staff should use this guidance as: An overview of the regulations for UST installation and operation; a comprehensive step-by-step guidance for the process of owning and operating an UST, from installation to closure; and a quick, ready-reference guide for any specific topic concerning UST ownership or operation

  12. Outlines of revised regulation standards for experimental research reactors

    International Nuclear Information System (INIS)

    Hohara, Shinya

    2015-01-01

    In response to the accident of TEPCO Fukushima Daiichi Nuclear Power Station, the government took actions through the revision of regulatory standards as well as the complete separation of regulation administrative department from promotion administrative department. The Nuclear and Industrial Safety Agency of the Ministry of Economy, Trade and Industry, which has been in charge of the regulations of commercial reactors, and the Office of Nuclear Regulations of the Ministry of Education, Culture, Sports, Science and Technology, which has been in charge of the regulations of reactors for experiment and research, were separated from both ministries, and integrated into the Nuclear Regulation Authority, which was newly established as the affiliated agency of the Ministry of the Environment. As for the revision of regulations and standards, the Nuclear Safety Commission was dismantled, and regulation enacting authority was given to the new Nuclear Regulation Authority, and the regulations that stipulated new regulatory standards were enacted. This paper outlines the contents of regulations related mainly to the reactors for experiment and research, and explains the following: (1) retroactive application of the new regulatory standards to existing reactor facilities, (2) examinations at the Nuclear Regulatory Agency, (3) procedures to confirm the compliance to the new standards, (4) seismic design classification, and (5) importance classification of safety function. (A.O.)

  13. CSPMS supported by information technology

    Science.gov (United States)

    Zhang, Hudan; Wu, Heng

    This paper will propose a whole new viewpoint about building a CSPMS(Coal-mine Safety Production Management System) by means of information technology. This system whose core part is a four-grade automatic triggered warning system achieves the goal that information transmission will be smooth, nondestructive and in time. At the same time, the system provides a comprehensive and collective technology platform for various Public Management Organizations and coal-mine production units to deal with safety management, advance warning, unexpected incidents, preplan implementation, and resource deployment at different levels. The database of this system will support national related industry's resource control, plan, statistics, tax and the construction of laws and regulations effectively.

  14. Export controls on high technology

    Energy Technology Data Exchange (ETDEWEB)

    Frank, N.K.

    1987-01-01

    A overview of the Export Administration Act of 1979 and subsequent regulations and amendments focuses on how licensing requirements and restrictions against boycott affect high technology exports. The purpose of these controls is to limit the export of technology with possible military applications, as well as to advance US foreign policy and protect the economy without imposing too great a restriction on the principles of free trade. Thus, the act encompasses political, economic, and security goals. Problems of predictability arise when embargoes or other controls are imposed for political or foreign policy reasons without regard to economic impacts. Amendments have attempted to streamline the exporting process, particularly in the area of computer and software licensing.

  15. 34 CFR 403.63 - How does a State carry out the State Vocational and Applied Technology Education Program?

    Science.gov (United States)

    2010-07-01

    ... Applied Technology Education Program? 403.63 Section 403.63 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the Secretary Assist Under... Technology Education Program? (a) Unless otherwise indicated in the regulations in this part, a State board...

  16. Identifying and overcoming barriers to technology implementation

    International Nuclear Information System (INIS)

    Bailey, M.; Warren, S.; McCune, M.

    1996-01-01

    In a recent General Accounting Office report, the Department of Energy's (DOE) Office of Environmental Management was found to be ineffective in integrating their environmental technology development efforts with the cleanup actions. As a result of these findings, a study of remediation documents was performed by the Technology Applications Team within DOE's Office of Environmental Restoration (EM-40) to validate this finding and to understand why it was occurring. A second initiative built on the foundation of the remediation document study and evaluated solutions to the ineffective implementation of improved technologies. The Technology Applications Team examined over 50 remediation documents (17 projects) which included nearly 600 proposed remediation technologies. It was determined that very few technologies are reaching the Records of Decision documents. In fact, most are eliminated in the early stages of consideration. These observations stem from regulators' and stakeholders' uncertainties in cost and performance of the technology and the inability of the technology to meet site specific conditions. The Technology Applications Team also set out to identify and evaluate solutions to barriers to implementing innovative technology into the DOE's environmental management activities. Through the combined efforts of DOE and the Hazardous Waste Action Coalition (HWAC), a full day workshop was conducted at the annual HWAC meeting in June 1995 to solve barriers to innovative technology implementation. Three barriers were identified as widespread throughout the DOE complex and industry. Identified barriers included a lack of verified or certified cost and performance data for innovative technologies; risk of failure to reach cleanup goals using innovative technologies; and communication barriers that are present at virtually every stage of the characterization/remediation process from development through implementation

  17. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  18. Technology Transfer Report

    Science.gov (United States)

    2000-01-01

    Since its inception, Goddard has pursued a commitment to technology transfer and commercialization. For every space technology developed, Goddard strives to identify secondary applications. Goddard then provides the technologies, as well as NASA expertise and facilities, to U.S. companies, universities, and government agencies. These efforts are based in Goddard's Technology Commercialization Office. This report presents new technologies, commercialization success stories, and other Technology Commercialization Office activities in 1999.

  19. Technology transfer by multinationals

    OpenAIRE

    Kostyantyn Zuzik

    2003-01-01

    The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

  20. Regulatory barriers to hazardous waste technology innovation

    International Nuclear Information System (INIS)

    Kuusinen, T.L.; Siegel, M.R.

    1991-02-01

    The primary federal regulatory programs that influence the development of new technology for hazardous waste are the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA, also commonly known as Superfund). Two important aspects of RCRA that can create barriers to hazardous waste technology innovation are technology-based waste pre-treatment standards and a cumbersome permitting program. By choosing a technology-based approach to the RCRA land disposal restrictions program, the US Environmental Protection Agency (EPA) has simultaneously created tremendous demand for the technologies specified in its regulations, while at the same time significantly reduced incentives for technology innovation that might have otherwise existed. Also, the RCRA hazardous waste permitting process can take years and cost hundreds of thousands of dollars. The natural tendency of permit writers to be cautious of unproven (i.e., innovative) technology also can create a barrier to deployment of new technologies. EPA has created several permitting innovations, however, to attempt to mitigate this latter barrier. Understanding the constraints of these permitting innovations can be important to the success of hazardous waste technology development programs. 3 refs

  1. Morgantown Energy Technology Center, technology summary

    International Nuclear Information System (INIS)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

  2. Living technology: exploiting life's principles in technology.

    Science.gov (United States)

    Bedau, Mark A; McCaskill, John S; Packard, Norman H; Rasmussen, Steen

    2010-01-01

    The concept of living technology-that is, technology that is based on the powerful core features of life-is explained and illustrated with examples from artificial life software, reconfigurable and evolvable hardware, autonomously self-reproducing robots, chemical protocells, and hybrid electronic-chemical systems. We define primary (secondary) living technology according as key material components and core systems are not (are) derived from living organisms. Primary living technology is currently emerging, distinctive, and potentially powerful, motivating this review. We trace living technology's connections with artificial life (soft, hard, and wet), synthetic biology (top-down and bottom-up), and the convergence of nano-, bio-, information, and cognitive (NBIC) technologies. We end with a brief look at the social and ethical questions generated by the prospect of living technology.

  3. Heterogeneous technologies, strategic groups and environmental efficiency technology gaps for European countries

    International Nuclear Information System (INIS)

    Kounetas, Konstantinos

    2015-01-01

    This paper measures technology (TG) and environmental efficiency technology gaps (EETGs) in 25 European countries over two distinct periods 2002 and 2008 examining the possible effect of adopted environmental regulations and the Kyoto protocol commitments on environmental efficiency technology gaps. However, the introduction of the metafrontier in our analysis puts into our discussion the role of heterogeneous technologies and its effect on the above-mentioned measures. Employing a directional distance function, we investigate whether there is an actual difference, in terms of environmental efficiency and efficiency performance, among European countries considering the technological frontiers under which they operate. The construction of individual frontiers has been realized employing a large number of variables that are highly correlated with countries' learning and absorbing capacity, new technological knowledge and using economic theory and classical frontier discrimination like developed vs. developing, North vs. South and participation in the Eurozone or not. The overall results indicate a crucial role of heterogeneous technologies for technology gaps in both periods. Moreover, a significant decrease for both measures, although in different percent, has been recorded emphasizing the key role of knowledge spillovers. -- Highlights: •We estimate technology gaps (TGs) for 25 EU countries in two distinct periods. •We estimate environmental efficiency technology gaps (EETGs). •We consider countries' technological capabilities with R&D, innovation and eco-innovation. •We test the effect of different frontier constitutions on TGs-EETGs. •We denote the specific role of knowledge spillovers

  4. Ketamine and international regulations.

    Science.gov (United States)

    Liao, Yanhui; Tang, Yi-Lang; Hao, Wei

    2017-09-01

    Ketamine is an anesthetic commonly used in low-income countries and has recently been shown to be effective for treatment-resistant depression. However, the illicit manufacturing, trafficking, and nonmedical use of ketamine are increasing globally, and its illicit use poses major public health challenges in many countries. To review the nonmedical use of ketamine in selected countries and its regulatory control. We conducted a review of literature identified from searches of the China National Knowledge Infrastructure (CNKI) (1979-2016) and PubMed databases, supplemented by additional references identified by the authors. Special attention was given to the regulation of ketamine. Illicit manufacturing, trafficking, and use of ketamine appear to have begun on a large scale in several Asian nations, and it has subsequently spread to other regions. Regulations governing availability of ketamine vary across countries, but there is a clear trend toward tighter regulations. As nonmedical use of ketamine and its harmful consequences have worsened globally, stricter controls are necessary. Appropriate regulation of ketamine is important for international efforts to control ketamine's cross-border trafficking and its nonmedical use.

  5. Federal Gasoline Regulations

    Science.gov (United States)

    The Clean Air Act requires EPA to regulate fuels and fuel additives for use in mobile sources if such fuel, fuel additive or any emission products causes or contributes to air or water pollution that may endanger the public health or welfare.

  6. Emotion regulation during isolation

    Czech Academy of Sciences Publication Activity Database

    Poláčková Šolcová, Iva; Šolcová, Iva

    2012-01-01

    Roč. 47, Suppl. 1 (2012) ISSN 0020-7594. [International Congress of Psychology /30./. 22.07.2012-27.07.2012, Cape Town] R&D Projects: GA ČR(CZ) GAP407/11/2226 Institutional support: RVO:68081740 Keywords : emotion regulation * isolation * Mars500 Subject RIV: AN - Psychology

  7. Legislation and regulation

    International Nuclear Information System (INIS)

    2001-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 3 of the document contains some details about the Brazilian legislation and regulation, the legislative and regulatory framework, regulatory body and responsibility of the license holder

  8. Legislation and regulation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 3 of the document contains some details about the Brazilian legislation and regulation, the legislative and regulatory framework, regulatory body and responsibility of the license holder.

  9. Regulations in radiation protection

    International Nuclear Information System (INIS)

    1986-01-01

    On the occasion of the twenty fifth anniversary of the Dutch Society for Radiation Protection, a symposium was held about Regulations in Radiation Protection. The program consisted of six contributions of which four are included in this publication. The posters presented are published in NVS-nieuws, 1985, vol. 11(5). (G.J.P.)

  10. Nuclear safety regulations

    International Nuclear Information System (INIS)

    1998-01-01

    The Departmental Rules and The Safety Guides were issued by the NNSA in 1998. The NNSA performed the activities of propagation and implementation of nuclear safety regulations at QTNPP in order to improve the nuclear safety culture of operating organization and construct and contract organizations

  11. Regulation under Uncertainty

    DEFF Research Database (Denmark)

    Sabel, Charles; Herrigel, Gary; Hull Kristensen, Peer

    2017-01-01

    generation of the implicated components or installations are updated accordingly. In this essay we develop these arguments and look closely at changes in the Norwegian offshore oil and gas industry and its regulator, the Petroleum Safety Authority to better understand the coevolution of vertically...

  12. Nondissipative optimum charge regulator

    Science.gov (United States)

    Rosen, R.; Vitebsky, J. N.

    1970-01-01

    Optimum charge regulator provides constant level charge/discharge control of storage batteries. Basic power transfer and control is performed by solar panel coupled to battery through power switching circuit. Optimum controller senses battery current and modifies duty cycle of switching circuit to maximize current available to battery.

  13. Vehicle recycling regulations

    DEFF Research Database (Denmark)

    Smink, Carla

    2007-01-01

    The number of end-of-life vehicles (ELVs) in the EU is increasing continously. Around 75 percent of an ELV are recyclable metals. The forecast growth in the number of ELVs calls for regulation that aims to minimise the environmental impact of a car. Using Denmark as an example, this article...

  14. Metabolic regulation of yeast

    Science.gov (United States)

    Fiechter, A.

    1982-12-01

    Metabolic regulation which is based on endogeneous and exogeneous process variables which may act constantly or time dependently on the living cell is discussed. The observed phenomena of the regulation are the result of physical, chemical, and biological parameters. These parameters are identified. Ethanol is accumulated as an intermediate product and the synthesis of biomass is reduced. This regulatory effect of glucose is used for the aerobic production of ethanol. Very high production rates are thereby obtained. Understanding of the regulation mechanism of the glucose effect has improved. In addition to catabolite repression, several other mechanisms of enzyme regulation have been described, that are mostly governed by exogeneous factors. Glucose also affects the control of respiration in a third class of yeasts which are unable to make use of ethanol as a substrate for growth. This is due to the lack of any anaplerotic activity. As a consequence, diauxic growth behavior is reduced to a one-stage growth with a drastically reduced cell yield. The pulse chemostat technique, a systematic approach for medium design is developed and medium supplements that are essential for metabolic control are identified.

  15. Voltage regulating circuit

    NARCIS (Netherlands)

    2005-01-01

    A voltage regulating circuit comprising a rectifier (2) for receiving an AC voltage (Vmains) and for generating a rectified AC voltage (vrec), and a capacitor (3) connected in parallel with said rectified AC voltage for providing a DC voltage (VDC) over a load (5), characterized by a unidirectional

  16. Maintenance and regulations

    International Nuclear Information System (INIS)

    Noel, R.

    1984-01-01

    Description of the main regulations concerning the processes tied with maintenance and in service supervision of the pressure vessels in classical or nuclear power plants or of their accessories (essentially in order to fix the time-table of the hydraulic test procedures and the inspection chronology [fr

  17. Allosteric Regulation of Proteins

    Indian Academy of Sciences (India)

    ... Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Resonance – Journal of Science Education; Volume 22; Issue 1. Allosteric Regulation of Proteins: A Historical Perspective on the Development of Concepts and Techniques. General Article Volume 22 Issue 1 January 2017 pp 37-50 ...

  18. Optimal Regulation of Lumpy Investments

    NARCIS (Netherlands)

    Zwart, G.; Broer, D.P.

    2012-01-01

    When a monopolist has discretion over the timing of infrastructure investments, regulation of post-investment prices interferes with incentivizing socially optimal investment timing. In a model of regulated lumpy investment under uncertainty, we study regulation when the regulator can condition

  19. Nuclear technology and society

    International Nuclear Information System (INIS)

    Suzuki, Tatsujiro; Tanaka, Yutaka; Taniguchi, Taketoshi; Oyama, Kosuke

    1999-01-01

    This special issue of Journal of the Atomic Energy Society of Japan deals with the relation between nuclear technology and society, and is composed of four papers: (1) Nuclear energy and international politics - sociotechnics around plutonium utilization; (2) Risk recognition and benefit recognition of nuclear facilities and social acceptance; (3) Environmental risk management and radioactive waste problem; and, (4) Public administration around the relation between nuclear energy and society. (1) describes the historical development of nuclear energy since its birth, focusing on how the leading countries tried to control nuclear proliferation. Peaceful utilization of nuclear energy is closely connected with the Non-proliferation problem. (1) also discusses the relation of plutonium utilization of Japan with international society. (2) discusses how nuclear facilities can be accepted by society, analyzing the background of risk recognition, in particular, of psychological character of mass society. (3) introduces an new approach (risk-based or risk-informed regulation) of environmental risk management for radioactive waste disposal problem, focusing on HLW (high-level waste). (4) explains the approach from public administration to nuclear energy and general energy policy and introduces PPA (participatory policy analysis) as a means for policy making. (M.M.)

  20. 34 CFR 300.6 - Assistive technology service.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology service. 300.6 Section 300.6 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... selection, acquisition, or use of an assistive technology device. The term includes— (a) The evaluation of...

  1. COMPUGIRLS: Stepping Stone to Future Computer-Based Technology Pathways

    Science.gov (United States)

    Lee, Jieun; Husman, Jenefer; Scott, Kimberly A.; Eggum-Wilkens, Natalie D.

    2015-01-01

    The COMPUGIRLS: Culturally relevant technology program for adolescent girls was developed to promote underrepresented girls' future possible selves and career pathways in computer-related technology fields. We hypothesized that the COMPUGIRLS would promote academic possible selves and self-regulation to achieve these possible selves. We compared…

  2. Legal aspects of auxillary reproductive technologies in infertility treatment

    Directory of Open Access Journals (Sweden)

    V.Yu. Albitskiy

    2011-01-01

    Full Text Available The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

  3. Development & Implementation of Electric Tram System with Wireless Charging Technology

    Directory of Open Access Journals (Sweden)

    DongHo Cho

    2015-06-01

    Full Text Available In this paper, an electric tram system with a wireless power transfer system based on SMFIR technology is presented. The detailed technology of power-line infra, regulator, and pick-up device is described for train application, respectively. Furthermore, implementation and experimental results for wireless power transfer electric tram are presented

  4. Improving Teacher-Made Assessments in Technology and Engineering Education

    Science.gov (United States)

    White, Jesse W.; Moye, Johnny J.; Gareis, Christopher R.; Hylton, Sarah P.

    2018-01-01

    In the interest of learning how to effectively use the technological literacy standards and of adhering to education regulation, this article focuses on efforts to improve the professional teaching practices of Technology and Engineering Education (TEE) teachers by using the Gareis and Grant (2015) process with respect to "Standards for…

  5. Regulation of Communication Policy of Modern Banks

    Directory of Open Access Journals (Sweden)

    Ketova Natalia, P.

    2016-03-01

    Full Text Available The paper shows the need for effective communication commercial banks, revealed the possibility of interaction with customers through advertising, sponsorship, philanthropy, sales promotion, lobbying of interests of banking institutions. The principles for the regulation of communications to ensure consistency of communication complex, which cause a complex effect on the external environment, the creation of adaptive system of marketing communications. It is proved that the possibilities of implementing an active communication policy of modern banks in recent years is constantly increasing. This contributes to the extension of Internet technologies, the creation of remote service channels, the emergence of new tools and technologies to attract and retain customers. On the example of JSC "Sberbank of Russia" presented the technology of using the traditional tools of ATL and BTL communications, the formation of the system CSR – corporate social responsibility, building contact with customers, enhancing their loyalty to the Bank. Reveals the areas of regulation of the savings Bank of its activities on the creation of the daily value of services based on the principles of involvement and co-operation of the system "Client - Bank", "Bank - Company", "Bank – Employees".

  6. Constructive Technology Assessmentand Technology Dynamics. The Case of Clean Technologies

    NARCIS (Netherlands)

    Schot, Johan

    1992-01-01

    A synthesis of neo-Schumpeterian evolutionary, sociological, and historical coevolution ary models could be used for constructive technology assessment, aimed at the active management of the process of technological change. This article proposes a synthetic quasi-evolutionary model, in which

  7. World Market Development and Consumer Acceptance of Irradiation Technology

    Directory of Open Access Journals (Sweden)

    Behnoush Maherani

    2016-11-01

    Full Text Available Food irradiation is an efficient technology that can be used to ensure food safety by eliminating insects and pathogens to prolong the shelf life. The process could be applied to fresh or frozen products without affecting the nutritional value. Presently more than 60 countries have adopted the technology. However, the technology adaptation differs from one country to another and, in some cases, consumers’ misunderstanding and lack of acceptance may hinder the technology adaptation process. This review summarizes the development of irradiation treatment worldwide and consumer attitudes towards the introduction of this technology. Also, the wholesomeness, beneficial effects, and regulation of irradiation are assessed.

  8. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Emerging environmental technologies and environmental technology policy

    Science.gov (United States)

    Clarke, Leon Edward

    This dissertation explores the role and design of environmental technology policy when environmental innovation is embodied in emerging environmental technologies such as photovoltaic cells or fuel cells. The dissertation consists of three individual studies, all of which use a simplified, general model industry between an emerging environmental technology and an entrenched, more-polluting technology. It clarifies the situations in which environmental technology policy can achieve high welfare and those in which it cannot; and it separates the possible situations an emerging environmental technology might face into four scenarios, each with its own technology policy recommendations. The second study attempts to clarify which of two factors is having a larger limiting effect on private investment in photovoltaics: the failure to internalize the environmental costs of fossil fuel electricity generation or a broad set of innovation market failures that apply to innovation irrespective of environmental concerns. The study indicates that innovation market failures are probably having a significantly larger impact than incomplete internalization. The third study explores the effectiveness of adoption subsidies at encouraging private-sector innovation. The conclusion is that adoption subsidies probably have only a limited effect on long-term, private-sector research. Two important general conclusions of the dissertation are (1) that optimal technology policy should begin with technology-push measures and end with demand-pull measures; and (2) that the technological response to internalization instruments, such as emissions taxes, may be highly nonlinear.

  10. Competitive Electricity Market Regulation in the United States: A Primer

    Energy Technology Data Exchange (ETDEWEB)

    Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Grid, Warwick (United Kingdom)

    2016-12-01

    The electricity system in the United States is a complex mechanism where different technologies, jurisdictions and regulatory designs interact. Today, two major models for electricity commercialization operate in the United States. One is the regulated monopoly model, in which vertically integrated electricity providers are regulated by state commissions. The other is the competitive model, in which power producers can openly access transmission infrastructure and participate in wholesale electricity markets. This paper describes the origins, evolution, and current status of the regulations that enable competitive markets in the United States.

  11. Technology's Impact on Production

    Energy Technology Data Exchange (ETDEWEB)

    Rachel Amann; Ellis Deweese; Deborah Shipman

    2009-06-30

    As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

  12. Disruptive Technology: An Uncertain Future

    Science.gov (United States)

    2005-05-21

    Technology that overturns market -- Military - Technology that causes a fundamental change in force structure, basing, and capability balance * Disruptive Technologies may arise from systems or enabling technology.

  13. 48 CFR 1804.470 - Security requirements for unclassified information technology (IT) resources.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Security requirements for unclassified information technology (IT) resources. 1804.470 Section 1804.470 Federal Acquisition Regulations... Classified Information Within Industry 1804.470 Security requirements for unclassified information technology...

  14. 31 CFR 545.205 - Prohibited importation of goods, software, technology, or services.

    Science.gov (United States)

    2010-07-01

    ..., software, technology, or services. 545.205 Section 545.205 Money and Finance: Treasury Regulations Relating..., software, technology, or services owned or controlled by the Taliban or persons whose property or interests... (AFGHANISTAN) SANCTIONS REGULATIONS Prohibitions § 545.205 Prohibited importation of goods, software...

  15. Whether blockchain technology violates the right to be forgotten?

    OpenAIRE

    Žymančius, Juras

    2018-01-01

    This master thesis analyzes the issues associated with the compliance of blockchain technology with the right to erasure or “right to be forgotten” in the General Data Protection Regulation. The first chapter reviews blockchain technology, how it works, types it has that is relevant to this thesis problem. In addition, it ascertains that there is no current legislation or guidelines regarding blockchain technology and its impact on personal data protection. The second chapter revi...

  16. Space shuttle OMS helium regulator design and development

    Science.gov (United States)

    Wichmann, H.; Kelly, T. L.; Lynch, R.

    1974-01-01

    Analysis, design, fabrication and design verification testing was conducted on the technological feasiblity of the helium pressurization regulator for the space shuttle orbital maneuvering system application. A prototype regulator was fabricated which was a single-stage design featuring the most reliable and lowest cost concept. A tradeoff study on regulator concepts indicated that a single-stage regulator with a lever arm between the valve and the actuator section would offer significant weight savings. Damping concepts were tested to determine the amount of damping required to restrict actuator travel during vibration. Component design parameters such as spring rates, effective area, contamination cutting, and damping were determined by test prior to regulator final assembly. The unit was subjected to performance testing at widely ranging flow rates, temperatures, inlet pressures, and random vibration levels. A test plan for propellant compatibility and extended life tests is included.

  17. Proposed changes for part N of suggested state regulations

    Energy Technology Data Exchange (ETDEWEB)

    Paris, R.

    1997-02-01

    This paper discusses proposed changes for Part N regulations regarding naturally occuring radioactive materials. It describes the work of the Commission on NORM of the Conference of Radiation Control Program Directors (CRCPD), toward adjusting the regulations. A set of questions was formulated and a review panel established to address these questions and come back with recommended actions. The panel recommended the distinction that the material being regulated is `Technologically Enhanced Naturally Occurring Radioactive Material` (TENORM). By this they mean `naturally occurring radioactive material not regulated under the Atomic Energy Act (AEA) whose radionuclide concentrations have been increased by or as a result of human practices.` Recommendations also include: using a dose based instead of concentration based standard; refined definition of exemptions from regulations; exclusion of radon from Total Effective Dose Equivalent (TEDE) calculations; provide states flexibility in implementation; inclusion of prospective remedial and operations aspects for TENORM; provision of institutional controls.

  18. Investment, regulation, and uncertainty

    Science.gov (United States)

    Smyth, Stuart J; McDonald, Jillian; Falck-Zepeda, Jose

    2014-01-01

    As with any technological innovation, time refines the technology, improving upon the original version of the innovative product. The initial GM crops had single traits for either herbicide tolerance or insect resistance. Current varieties have both of these traits stacked together and in many cases other abiotic and biotic traits have also been stacked. This innovation requires investment. While this is relatively straight forward, certain conditions need to exist such that investments can be facilitated. The principle requirement for investment is that regulatory frameworks render consistent and timely decisions. If the certainty of regulatory outcomes weakens, the potential for changes in investment patterns increases.   This article provides a summary background to the leading plant breeding technologies that are either currently being used to develop new crop varieties or are in the pipeline to be applied to plant breeding within the next few years. Challenges for existing regulatory systems are highlighted. Utilizing an option value approach from investment literature, an assessment of uncertainty regarding the regulatory approval for these varying techniques is undertaken. This research highlights which technology development options have the greatest degree of uncertainty and hence, which ones might be expected to see an investment decline. PMID:24499745

  19. Radioactive waste management and regulation

    International Nuclear Information System (INIS)

    Willrich, M.; Lester, R.K.; Greenberg, S.C.; Mitchell, H.C.; Walker, D.A.

    1977-01-01

    Purpose of this book is to assist in developing public policy and institutions for the safe management of radioactive waste, currently and long term. Both high-level waste and low-level waste containing transuranium elements are covered. The following conclusions are drawn: the safe management of post-fission radioactive waste is already a present necessity and an irreversible long-term commitment; the basic goals of U.S. radioactive waste policy are unclear; the existing organization for radioactive waste management is likely to be unworkable if left unchanged; and the existing framework for radioactive waste regulation is likely to be ineffective if left unchanged. The following recommendations are made: a national Radioactive Waste Authority should be established as a federally chartered public corporation; with NRC as the primary agency, a comprehensive regulatory framework should be established to assure the safety of all radioactive waste management operations under U.S. jurisdiction or control; ERDA should continue to have primary government responsibility for R and D and demonstration of radioactive waste technology; and the U.S. government should propose that an international Radioactive Waste Commission be established under the IAEA

  20. Regulation of microgeneration and microgrids

    International Nuclear Information System (INIS)

    Moises Costa, Paulo; Matos, Manuel A.; Pecas Lopes, J.A.

    2008-01-01

    The concept of microgrid (μGrid) has been emerging as a way to integrate microgeneration (μG) in low-voltage (LV) networks and simultaneously improve its potential benefits. Technical requirements to connect μgrids to LV networks have been studied in order to make this concept technologically feasible and safe to operate. However, the regulatory framework for economic integration of μG and μGrids on distribution systems, despite being crucial, is still an open issue. The main purpose of this paper is to contribute for the development of an appropriate economic regulation framework that removes the barriers to μG and μGrid development. To do so, the relevant costs and benefits resulting from the establishment of μG and μGrid are identified and a methodology for sharing those costs and benefits among the involved economic agents is presented. The only pre-requisite of such a methodology is the existence of a net benefit to all economic agents

  1. Regulation of microgeneration and microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Moises Costa, Paulo [Escola Superior Tecnologia Viseu, Instituto Politecnico Viseu, Campus Politecnico Repeses, 3504-510 Viseu (Portugal)], E-mail: paulomoises@elect.estv.ipv.pt; Matos, Manuel A.; Pecas Lopes, J.A. [INESC Porto, Faculdade de Engenharia da Universidade do Porto, Porto (Portugal)

    2008-10-15

    The concept of microgrid ({mu}Grid) has been emerging as a way to integrate microgeneration ({mu}G) in low-voltage (LV) networks and simultaneously improve its potential benefits. Technical requirements to connect {mu}grids to LV networks have been studied in order to make this concept technologically feasible and safe to operate. However, the regulatory framework for economic integration of {mu}G and {mu}Grids on distribution systems, despite being crucial, is still an open issue. The main purpose of this paper is to contribute for the development of an appropriate economic regulation framework that removes the barriers to {mu}G and {mu}Grid development. To do so, the relevant costs and benefits resulting from the establishment of {mu}G and {mu}Grid are identified and a methodology for sharing those costs and benefits among the involved economic agents is presented. The only pre-requisite of such a methodology is the existence of a net benefit to all economic agents.

  2. Regulation of microgeneration and microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Paulo Moises [Escola Superior Tecnologia Viseu, Instituto Politecnico Viseu, Campus Politecnico Repeses, 3504-510 Viseu (Portugal); Matos, Manuel A.; Pecas Lopes, J.A. [INESC Porto, Faculdade de Engenharia da Universidade do Porto, Porto (Portugal)

    2008-10-15

    The concept of microgrid ({mu}Grid) has been emerging as a way to integrate microgeneration ({mu}G) in low-voltage (LV) networks and simultaneously improve its potential benefits. Technical requirements to connect {mu}grids to LV networks have been studied in order to make this concept technologically feasible and safe to operate. However, the regulatory framework for economic integration of {mu}G and {mu}Grids on distribution systems, despite being crucial, is still an open issue. The main purpose of this paper is to contribute for the development of an appropriate economic regulation framework that removes the barriers to {mu}G and {mu}Grid development. To do so, the relevant costs and benefits resulting from the establishment of {mu}G and {mu}Grid are identified and a methodology for sharing those costs and benefits among the involved economic agents is presented. The only pre-requisite of such a methodology is the existence of a net benefit to all economic agents. (author)

  3. Marketing technology in macroeconomics.

    Science.gov (United States)

    Tamegawa, Kenichi

    2012-01-01

    In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

  4. EPA'S ENVIRONMENTAL TECHNOLOGIES

    Science.gov (United States)

    The use of innovative technology is impeded by the lack of independent, credible information as to how the technology performs. Such data is needed by technology buyers and regulatory decision makers to make informed decisions on technologies that represent good financial invest...

  5. Technology Partnership Agreements | NREL

    Science.gov (United States)

    Partnership Agreements Technology Partnership Agreements Looking for Funding? We do not fund any projects under a technology partnership agreement. The partner provides the necessary resources and, in using technology partnership agreements. See a summary of our Fiscal Year 2017 technology partnership

  6. On technology blending.

    OpenAIRE

    Rosenberg N

    1986-01-01

    ILO pub-WEP pub. Working paper on the blending of traditional technology and technological change in developing countries - argues that choice of technology should be compatible with labour intensive requirements and local level management and economic conditions; considers employment creation and economic implications; concludes that technology transfer should be selective. References.

  7. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  8. Emerging technology and ethics

    CERN Document Server

    Wakunuma, Kutoma

    2011-01-01

    This e-book on Emerging Technologies and Ethics includes a collection of essays which explore the future and ethics of emerging information and communication technologies. Articles in the collection include an overview of the legal implications which may be relevant to the ethical aspects of emerging technologies and also ethical issues arising from the mass-take up of mobile technologies.

  9. Teacher Educator Technology Competencies

    Science.gov (United States)

    Foulger, Teresa S.; Graziano, Kevin J.; Schmidt-Crawford, Denise A.; Slykhuis, David A.

    2017-01-01

    The U.S. National Educational Technology Plan recommends the need to have a common set of technology competencies specifically for teacher educators who prepare teacher candidates to teach with technology (U.S. Department of Education, Office of Educational Technology, 2017). This study facilitated the co-creation of the Teacher Educator…

  10. Educational Technology in China

    Science.gov (United States)

    Meifeng, Liu; Jinjiao, Lv; Cui, Kang

    2010-01-01

    This paper elaborates the two different academic views of the identity of educational technology in China at the current time--advanced-technology-oriented cognition, known as Electrifying Education, and problem-solving-oriented cognition, known as Educational Technology. It addresses five main modes of educational technology in China: as a…

  11. Regulation of meiotic gene expression in plants

    Directory of Open Access Journals (Sweden)

    Adele eZhou

    2014-08-01

    Full Text Available With the recent advances in genomics and sequencing technologies, databases of transcriptomes representing many cellular processes have been built. Meiotic transcriptomes in plants have been studied in Arabidopsis thaliana, rice (Oryza sativa, wheat (Triticum aestivum, petunia (Petunia hybrida, sunflower (Helianthus annuus, and maize (Zea mays. Studies in all organisms, but particularly in plants, indicate that a very large number of genes are expressed during meiosis, though relatively few of them seem to be required for the completion of meiosis. In this review, we focus on gene expression at the RNA level and analyze the meiotic transcriptome datasets and explore expression patterns of known meiotic genes to elucidate how gene expression could be regulated during meiosis. We also discuss mechanisms, such as chromatin organization and non-coding RNAs, that might be involved in the regulation of meiotic transcription patterns.

  12. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  13. NASA Technology Transfer System

    Science.gov (United States)

    Tran, Peter B.; Okimura, Takeshi

    2017-01-01

    NTTS is the IT infrastructure for the Agency's Technology Transfer (T2) program containing 60,000+ technology portfolio supporting all ten NASA field centers and HQ. It is the enterprise IT system for facilitating the Agency's technology transfer process, which includes reporting of new technologies (e.g., technology invention disclosures NF1679), protecting intellectual properties (e.g., patents), and commercializing technologies through various technology licenses, software releases, spinoffs, and success stories using custom built workflow, reporting, data consolidation, integration, and search engines.

  14. Markets, religion, regulation

    DEFF Research Database (Denmark)

    Fischer, Johan

    2016-01-01

    Most recent scholarship on moral economies or religious markets argues for the compatibility of economies/markets and religious practices in particular national or regional contexts. However, over the last couple of decades or so religious markets have entered a new phase characterized by new forms...... of regulation, certification and standardization on a global scale. Building on research on global kosher (a Hebrew term meaning “fit” or “proper”), halal (an Arabic word that literally means “permissible” or “lawful”) and Hindu vegetarianism this paper argues that these economies or markets to a large extent...... are conditioned by and themselves condition forms of transnational governmentality, that is, new and often overlapping practices of government and grassroots politics. I explore religious economies and markets at three interrelated levels of the social scale: state and non-state regulation, the marketplace...

  15. Environmental considerations and regulations

    International Nuclear Information System (INIS)

    Blanco, R.E.

    1976-01-01

    Methods used to control the radiological impact of the nuclear fuel cycle are described. This control is exercised through the application of a series of federal laws and regulations that are used as the basis for licensing nuclear facilities. The control is exercised more directly by the use of radwaste treatment equipment at the nuclear facilities to limit the release of radioactive materials. Federal laws and regulations are summarized and their applications in licensing actions are discussed. Radiological doses from materials released from licensed facilities are compared with doses from natural background. A series of cost/benefit engineering surveys are being made to determine the cost and effectiveness of radwaste systems for decreasing the release of radioactive materials from model fuel cycle facilities and to determine the benefits in terms of reduction in dose commitment to individuals and populations in surrounding areas

  16. Transients: The regulator's view

    International Nuclear Information System (INIS)

    Sheron, B.W.; Speis, T.P.

    1984-01-01

    This chapter attempts to clarify the basis for the regulator's concerns for transient events. Transients are defined as both anticipated operational occurrences and postulated accidents. Recent operational experience, supplemented by improved probabilistic risk analysis methods, has demonstrated that non-LOCA transient events can be significant contributors to overall risk. Topics considered include lessons learned from events and issues, the regulations governing plant transients, multiple failures, different failure frequencies, operator errors, and public pressure. It is concluded that the formation of Owners Groups and Regulatory Response Groups within the owners groups are positive signs of the industry's concern for safety and responsible dealing with the issues affecting both the US NRC and the industry

  17. The regulator's perspective

    International Nuclear Information System (INIS)

    Norrby, S.

    1997-01-01

    Recommendations on general safety objectives and good practices related to radioactive waste management are given by international organisations such as the OECD/NEA and the IAEA. Moreover, international conventions and other supranational legal instruments, such as EU directives, lay down requirements on the safe management of radioactive waste. The implementer of the system for waste management and disposal and the regulator will have different roles. The responsibility for the management and disposal of radioactive waste is with the implementer, who has taken over that responsibility from the generator of the waste. The regulator's responsibility is to define safety and radiation protection requirements, to issue guidance on safety assessment methodology and documentation, to review the implementer's safety assessments as a basis for licensing of waste management and disposal activities and facilities and to inspect and review construction and operation of nuclear facilities to ensure compliance with licensing conditions. (R.P.)

  18. Probiotics and Appetite Regulation

    DEFF Research Database (Denmark)

    Bjerg, Anne Toksvig

    resistance and blood lipid profile among others. Probiotics which are health promoting bacteria can potentially be used to affect the GM and thereby change metabolic outcomes of the host. Animal studies have shown associations between intake of probiotics and appetite regulation, but currently no human...... studies have investigated this effect. Supplementation with different probiotic strains have been shown to have an effect on blood lipid profiles in both animals and humans and the mechanisms behind have been studied in vitro and in rodents. The aim of the present thesis was to examine in an ex vivo...... intestine, in an animal study and in two human studies the effect of the probiotic bacteria Lactobacillus paracasei subsp. paracasei L. casei W8 (W8) on appetite regulation, blood lipids and blood fatty acids. In addition, it was investigated if W8 had an effect on the fecal microbiota of the human...

  19. Regulation of Meiotic Recombination

    Energy Technology Data Exchange (ETDEWEB)

    Gregory p. Copenhaver

    2011-11-09

    Meiotic recombination results in the heritable rearrangement of DNA, primarily through reciprocal exchange between homologous chromosome or gene conversion. In plants these events are critical for ensuring proper chromosome segregation, facilitating DNA repair and providing a basis for genetic diversity. Understanding this fundamental biological mechanism will directly facilitate trait mapping, conventional plant breeding, and development of genetic engineering techniques that will help support the responsible production and conversion of renewable resources for fuels, chemicals, and the conservation of energy (1-3). Substantial progress has been made in understanding the basal recombination machinery, much of which is conserved in organisms as diverse as yeast, plants and mammals (4, 5). Significantly less is known about the factors that regulate how often and where that basal machinery acts on higher eukaryotic chromosomes. One important mechanism for regulating the frequency and distribution of meiotic recombination is crossover interference - or the ability of one recombination event to influence nearby events. The MUS81 gene is thought to play an important role in regulating the influence of interference on crossing over. The immediate goals of this project are to use reverse genetics to identify mutants in two putative MUS81 homologs in the model plant Arabidopsis thaliana, characterize those mutants and initiate a novel forward genetic screen for additional regulators of meiotic recombination. The long-term goal of the project is to understand how meiotic recombination is regulated in higher eukaryotes with an emphasis on the molecular basis of crossover interference. The ability to monitor recombination in all four meiotic products (tetrad analysis) has been a powerful tool in the arsenal of yeast geneticists. Previously, the qrt mutant of Arabidopsis, which causes the four pollen products of male meiosis to remain attached, was developed as a facile system

  20. Physics and high technology

    International Nuclear Information System (INIS)

    Shao Liqin; Ma Junru.

    1992-01-01

    At present, the development of high technology has opened a new chapter in world's history of science and technology. This review describes the great impact of physics on high technology in six different fields (energy technology, new materials, information technology, biotechnology, space technology, and Ocean technology). It is shown that the new concepts and new methods created in physics and the special conditions and measurements established for physics researches not only deepen human's knowledge about nature but also point out new directions for engineering and technology. The achievements in physics have been more and more applied to high technology, while the development of high technology has explored some new research areas and raised many novel, important projects for physics. Therefore, it is important for us to strengthen the research on these major problems in physics