WorldWideScience

Sample records for regulate retail wheeling

  1. The prospects for retail wheeling

    International Nuclear Information System (INIS)

    O'Donnell, E.H.; Center, J.A.

    1992-01-01

    This paper as published is an outline of a presentation on retail wheeling of electric power. The topics discussed are development of increased wholesale transmission access, government regulatory policies on wholesale transmission, examples of past and present retail transmission access agreements, examples of Federal Energy Regulatory Commission jurisdiction over retail wheeling, and state policies on retail wheeling

  2. The time has come for retail wheeling

    International Nuclear Information System (INIS)

    Dahlen, D.O.; Achinger, S.K.

    1993-01-01

    Retail wheeling, the transmission and distribution of electric power for end users, fosters competition and promotes the efficient use of resources. Access to electric-utility transmission and distribution systems would establish competitive electric markets by permitting retail customers to obtain the lowest cost for energy which would meet their specific needs. Among electric utilities and their customers, the idea of allowing market forces to attract supply and set prices is a current controversy. To counter the anticompetitive effects of recent mergers in the wholesale market, the Federal Energy Regulatory Commission (FERC) has mandated open transmission access for wholesale customers. However, the FERC denied access to retail customers and qualifying facilities (QF) in both its Northeast Utilities (FERC case No. EC-90-1 90) and PacifiCorp (U.S. Circuit Court of Appeals for D.C., 89-1333) decisions. Retail wheeling will benefit both consumers and producers. The ability of large customers to purchase power from the lowest cost sources and have it transmitted to their facilities, will save American industrial and commercial customers at least $15 billion annually. The Increased efficiency resulting from competition would also reduce residential electric bills. Through retail wheeling, independent power producers can market their capacity to a greater customer base, and traditional utilities will benefit from access to other utilities markets with the more efficient utilities prospering. Retail wheeling will, therefore, reward efficient utilities and encourage inefficient utilities to improve

  3. Transmission access and retail wheeling. The key questions

    International Nuclear Information System (INIS)

    Casazza, J.A.

    1996-01-01

    The key questions involving transmission access and retail wheeling are discussed, distinguishing between opposing views regarding the effect on system costs and the environment, particularly on optimal planning involving matching capacity and demand, generation use, demand side management, and economic operations. Also discussed are contrasting views regarding the effect of cost control pressures, regulatory advantages and disadvantages, the impact on system reliability, and the stranding of investment. The author's key concern is the effect of retail wheeling upon optimal planning and operation i.e., will competitors be willing to provide one another with the cost and technical information required for coordination? In his worst scenario, retail wheeling may lead to substantial production cost increases, lessened reliability, and unfair cost-shifting between customer classes. More optimistically, production costs and reliability may be unaffected and the cost-shifting could be salubrious. 7 figs., 11 refs

  4. Regulated electricity retailing in Chile

    Energy Technology Data Exchange (ETDEWEB)

    Galetovic, Alexander, E-mail: alexander@galetovic.cl [Facultad de Ciencias Economicas y Empresariales, Universidad de los Andes, Santiago, Chile. Av. San Carlos de Apoquindo 2200, Las Condes, Santiago (Chile); Munoz, Cristian M., E-mail: cmunozm@aes.com [AES Gener and Departamento de Ingenieria Electrica, Universidad Catolica de Chile (Chile)

    2011-10-15

    While some countries have unbundled distribution and retailing, skeptics argue that the physical attributes of electricity make retailers redundant. Instead, it is claimed that passive pass through of wholesale prices plus regulated charges for transmission and distribution suffice for customers to benefit from competitive generation markets. We review the Chilean experience with regulated retailing and pass through of wholesale prices. We argue that when energy wholesale prices are volatile and prices are stabilized, distortions emerge. Regulated retailers gain little by mitigating or correcting them. On the contrary, sometimes price distortions increase their profits. We estimate the cost of three distortions that neither regulated retailers nor the regulator have shown any interest in correcting. - Highlights: > We review Chile's experience with regulated electricity retailing. > Distortions emerge when energy wholesale prices are volatile and prices stabilized. > Regulated retailers gain little by mitigating or correcting distortions. > Sometimes price distortions increase retailers' profits. > We estimate the cost of three distortions, which retailers have not corrected.

  5. Regulated electricity retailing in Chile

    International Nuclear Information System (INIS)

    Galetovic, Alexander; Munoz, Cristian M.

    2011-01-01

    While some countries have unbundled distribution and retailing, skeptics argue that the physical attributes of electricity make retailers redundant. Instead, it is claimed that passive pass through of wholesale prices plus regulated charges for transmission and distribution suffice for customers to benefit from competitive generation markets. We review the Chilean experience with regulated retailing and pass through of wholesale prices. We argue that when energy wholesale prices are volatile and prices are stabilized, distortions emerge. Regulated retailers gain little by mitigating or correcting them. On the contrary, sometimes price distortions increase their profits. We estimate the cost of three distortions that neither regulated retailers nor the regulator have shown any interest in correcting. - Highlights: → We review Chile's experience with regulated electricity retailing. → Distortions emerge when energy wholesale prices are volatile and prices stabilized. → Regulated retailers gain little by mitigating or correcting distortions. → Sometimes price distortions increase retailers' profits. → We estimate the cost of three distortions, which retailers have not corrected.

  6. Using distributed fuel cells to compete with established utilities under rules permitting retail wheeling

    International Nuclear Information System (INIS)

    Miller, D.A.; Mathur, A.

    1996-01-01

    Regulatory reform in the electricity industry clearly has many implications for the corporate structure of electric utilities, the pricing of energy products and services, and the quality of service received by customers. But it also has implications for the selection of energy generating technologies. The rise of the cogenerator and independent power producer has been a major force in the expanded use of combined-cycle power plants and their technological advancement. The next stage of increased deregulation, retail wheeling, must also lead to further technological change, because the economic climate determines the operational characteristics required of new generating resources. This paper discusses the use of distributed fuel cells to compete with established utilities in areas where retail wheeling has been instituted. It will cover in detail the unique advantages of the technology under this industry configuration. The paper will pay particular attention to the operational and design characteristics of fuel cells that will provide companies the flexibility they require to compete successfully. Finally, the paper will discuss the implications for the use of distributed fuel cells of alternative retail wheeling implementation schemes

  7. Regulated and unregulated Nordic retail prices

    DEFF Research Database (Denmark)

    Olsen, Ole Jess; Johnsen, Tor Arnt

    2011-01-01

    in Sweden but higher than in Norway and Finland. Because of market design Norwegian default contracts are competitive whereas Swedish contracts provide the retailer with some market power. We interpret the low Finnish margins as a result of municipal retailers continuing traditional pricing from...... competitive prices....... default prices are regulated whereas default prices in the other countries are unregulated. Systematic price differences exist among the Nordic countries. However, as wholesale prices sometimes differ the gross margin is a more relevant indicator. Regulated gross margins are lower in Denmark than...

  8. Retailer licensing and tobacco display compliance: are some retailers more likely to flout regulations?

    Science.gov (United States)

    Fry, Rae; Burton, Suzan; Williams, Kelly; Walsberger, Scott; Tang, Anita; Chapman, Kathy; Egger, Sam

    2017-03-01

    To assess retailer compliance with a licensing scheme requiring tobacco retailers to list their business details with the government, to examine whether listed retailers are more likely to comply with a point-of-sale (POS) display ban and other in-store retailing laws and to explore variations in compliance between different retailer types and locations. An audit of 1739 retailers in New South Wales, Australia, was used to assess compliance with tobacco retailing legislation. Auditors actively searched for and audited unlisted retailers and all listed retailers in 122 metropolitan and regional postcodes. Multivariate generalised linear regression models were used to examine associations between compliance and retailer type, remoteness and demographic characteristics (socioeconomic level, proportion of population under 18 years and proportion born in Australia). One unlisted tobacco retailer was identified for every 12.6 listed tobacco retailers. Unlisted retailers were significantly more likely than listed retailers to breach in-store retailing laws (plaws was only 73.4%. Retailers in socioeconomically disadvantaged areas had lower compliance than those in high socioeconomic areas. Some tobacco retailers did not list their business details with the government as required, even though there was no financial cost to do so. Unlisted retailers were more likely to violate in-store regulations. The results suggest licensing schemes can be useful for providing a list of retailers, thus facilitating enforcement, but require a system to search for, and respond to, unlisted/unlicensed retailers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  9. Regulated and unregulated Nordic retail prices

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, Tor Arnt, E-mail: tor.a.johnsen@bi.no [Norwegian School of Management BI, NO-0442 Oslo (Norway); Olsen, Ole Jess, E-mail: ojo@ruc.dk [Department of Environmental, Social and Spatial Change (ENSPAC), Roskilde University, Building 10.1, Universitetsvej 1, DK-4000, Roskilde (Denmark)

    2011-06-15

    Nordic residential electricity consumers can now choose among a number of contracts and suppliers. A large number of households have continued to purchase electricity from the incumbent supplier at default contract terms. In this paper, we compare the situation for such passive customers. Danish default prices are regulated whereas default prices in the other countries are unregulated. Systematic price differences exist among the Nordic countries. However, as wholesale prices sometimes differ the gross margin is a more relevant indicator. Regulated gross margins are lower in Denmark than in Sweden but higher than in Norway and Finland. Because of market design Norwegian default contracts are competitive whereas Swedish contracts provide the retailer with some market power. We interpret the low Finnish margins as a result of municipal retailers continuing traditional pricing from the monopoly period. Danish margins are higher than the competitive Norwegian margins but are earned from a much lower level of consumption. The annually margins earned per consumer are very close in the two countries, which indicates that the Danish regulation is achieving its objective of approaching competitive prices. - Highlights: > Prices of active and passive Nordic residential electricity consumers are compared. > Active consumers get lower prices in Sweden but not in Norway. > Prices of passive consumers differ considerably among the four Nordic countries. > Danish regulated prices compare well with unregulated prices in the other countries. > Passive consumers in Finland have low prices compared with the other countries.

  10. Regulated and unregulated Nordic retail prices

    International Nuclear Information System (INIS)

    Johnsen, Tor Arnt; Olsen, Ole Jess

    2011-01-01

    Nordic residential electricity consumers can now choose among a number of contracts and suppliers. A large number of households have continued to purchase electricity from the incumbent supplier at default contract terms. In this paper, we compare the situation for such passive customers. Danish default prices are regulated whereas default prices in the other countries are unregulated. Systematic price differences exist among the Nordic countries. However, as wholesale prices sometimes differ the gross margin is a more relevant indicator. Regulated gross margins are lower in Denmark than in Sweden but higher than in Norway and Finland. Because of market design Norwegian default contracts are competitive whereas Swedish contracts provide the retailer with some market power. We interpret the low Finnish margins as a result of municipal retailers continuing traditional pricing from the monopoly period. Danish margins are higher than the competitive Norwegian margins but are earned from a much lower level of consumption. The annually margins earned per consumer are very close in the two countries, which indicates that the Danish regulation is achieving its objective of approaching competitive prices. - Highlights: → Prices of active and passive Nordic residential electricity consumers are compared. → Active consumers get lower prices in Sweden but not in Norway. → Prices of passive consumers differ considerably among the four Nordic countries. → Danish regulated prices compare well with unregulated prices in the other countries. → Passive consumers in Finland have low prices compared with the other countries.

  11. 75 FR 55409 - Regulation of Off-Exchange Retail Foreign Exchange Transactions and Intermediaries

    Science.gov (United States)

    2010-09-10

    ... currency with members of the retail public (i.e., ``retail forex transactions''). The new regulations and... in detail the historical background of the regulation of retail forex transactions, and the events... between forex firms and retail customers on the other hand.\\5\\ \\3\\ Regulation of Off-Exchange Retail...

  12. CIVIL-LEGAL REGULATION OF THE SUPPLY AGREEMENT WITH RETAILERS

    Directory of Open Access Journals (Sweden)

    Gulshat T. Kamalieva

    2015-01-01

    Full Text Available The article deals with topical issues in the sphere of delivery contracts with retailеrs. The author makes conclusions based on the conducted analysis of regulations, litigation, commercial practices, in particular on the example of legal delivery contracts with retail chains.

  13. Regulating the tobacco retail environment: beyond reducing sales to minors.

    Science.gov (United States)

    Chapman, S; Freeman, B

    2009-12-01

    The World Health Organization Framework Convention on Tobacco Control (FCTC) has little to say about the regulation of tobacco retailing, with most research and policy debate having been restricted to confining sales to adults and removing advertising displays, including packs. Tobacco retailing is largely unregulated, reflecting the historical regulatory trivialisation of tobacco products, now demonstrably anachronistic with the advent of near global support for the FCTC. This situation contrasts markedly with the regulation of pharmaceuticals, and many other goods and services subject to a wide variety of restrictions. This review proposes that the international tobacco control community should open up debate on retail regulation to examine the suitability of principles long accepted in pharmaceutical regulation. These include: restrictions on the number and location of tobacco retail outlets, the banning of tobacco retail displays, floor (minimum) price controls, restricting the amount of tobacco smokers could purchase over a given time and loss of retail licensure following breaches of any of the conditions of license. It proposes that retail licenses should be heavily restricted and tradable, becoming valuable commercial assets, where the threat of loss or revocation would act as an incentive for strict adherence to the measures proposed.

  14. QF certification and state regulation of retail sales

    International Nuclear Information System (INIS)

    Gross, T.P.

    1990-01-01

    This article examines the relationship of qualify facilities (QFs) and the industrial facilities to which they provide power. The paper presents case histories of Alcon and Puerto Rico Electric Power Authority versus FERC, Union Carbide Corporation and Fina Oil and Chemical Company versus FERC, state decisions regarding regulation of retail sales by QFs and steps to avoiding similar confrontations

  15. Living in the twilight zone : from regulation to retail

    International Nuclear Information System (INIS)

    Lambright, B.

    1998-01-01

    The electric power industry structure in the province of Alberta was discussed. One of the biggest challenges facing the industry is the transition from regulation to open retail competition. Deregulation in the industry began in 1996 with the Electric Utilities Act. In January 1999 the market will open for large industrial customers and full customer choice is to be in place by January 2001. The challenges that Alberta will face in moving to full customer choice was the special focus of this presentation. Adding to these formidable challenges is the fact that the Alberta market is small and is physically isolated from other electrical systems with very limited interconnections with other areas. In consequence, the system may be nearing a point of supply and demand balance for generation and needs some immediate market action to avoid capacity shortages. Alberta Power is tackling these challenges on three fronts: (1) the regulated wire business, (2) the deregulation framework, and (3) new competitive opportunities

  16. 78 FR 21019 - Retail Foreign Exchange Transactions (Regulation NN)

    Science.gov (United States)

    2013-04-09

    ... \\6\\ (a ``retail forex rule''). Section 2(c)(2)(B)(i)(I) includes ``an agreement, contract, or...)).'' \\7\\ A Federal regulatory agency's retail forex rule must treat all such futures and options and all.... 7 U.S.C. 1a(21). \\4\\ For purposes of the retail forex rules, ``Federal regulatory agency'' includes...

  17. 76 FR 46652 - Retail Foreign Exchange Transactions (Regulation NN)

    Science.gov (United States)

    2011-08-03

    ... Federal regulatory agency shall prescribe \\6\\ (a ``retail forex rule''). Section 2(c)(2)(B)(i)(I) includes... Exchange Act of 1934 (15 U.S.C. 78f(a)).'' \\7\\ A Federal regulatory agency's retail forex rule must treat... retail forex statutory provisions will be the section where the provisions will be codified in the...

  18. Retail gas markets - a case of regulated deregulation?

    International Nuclear Information System (INIS)

    Wood, T.

    2001-01-01

    While much has been said recently on the introduction of full retail contestability in Australia's gas markets, the process is far from over. The General Manager (Retail) with Origin Energy-and a new addition to the Australian Gas Association Board-provides an overview of the process to date, and how it might progress in the future. He concluded that in Australia, the retail gas market is relatively small and the processes initiated to achieve full retail competition are still largely fragmented across jurisdictions. These factors have potential to generate costs which could severely dent, if not exceed the anticipated benefit of competition

  19. 75 FR 3281 - Regulation of Off-Exchange Retail Foreign Exchange Transactions and Intermediaries

    Science.gov (United States)

    2010-01-20

    ... members of the retail public (i.e., ``retail forex transactions''). The Commodity Exchange Act, as amended... forex transactions offered by NFA's members. Additionally, the Proposal would amend existing regulations... forex. \\1\\ Food, Conservation, and Energy Act of 2008, Pub. L. 110-246, 122 Stat. 1651, 2189-2204 (2008...

  20. Retail experience in the de-regulated market

    International Nuclear Information System (INIS)

    Cummings, R.

    2003-01-01

    This paper describes the experience gained to date in the de-regulated electricity market through an examination of the commercial market. In 2001, chaos provided opportunity, while in 2002 the emphasis was on operations. In 2003, the landscape reflected hyper-competition, selling second services, and a changing landscape. A discussion followed on the residential market with a look at market structure, economics, and uncertainty concerning the future. The following components were identified as working well: wholesale market, commercial market, market model/data, and innovation in offerings and green supply. Areas requiring further improvement were also identified. It was suggested that the residential de-regulated roadmap should be clarified and retail friendly transactions should be imposed. Other improvements involve education and operations/system capabilities. The author concluded that the deregulated electricity market is still an immature market, where progress is being made in the commercial market. The residential market is in a critical period, with a market model still evolving. figs

  1. Competition, regulation, and pricing behavior in the Spanish retail gasoline market

    OpenAIRE

    Contín Pilart, Ignacio; Correljé, Aad F.; Palacios, María Blanca

    2006-01-01

    The restructuring of the Spanish oil industry produced a highly concentrated oligopoly in the retail gasoline market. In June 1990 the Spanish government introduced a system of ceiling price regulation in order to ensure that "liberalization" was accompanied by adequate consumer protection. This paper examines the pricing behavior of the retail gasoline market using multivariate error correction models over the period January 1993 (abolishment of the state monopoly)-December 2004. The results...

  2. Are retailers compliant with zoning regulations that ban tobacco sales near schools in Changsha, China?

    Science.gov (United States)

    Wang, Ling; Lu, Bo; Wewers, Mary Ellen; Foraker, Randi E; Xie, Mengyao; Ferketich, Amy K

    2017-07-01

    Tobacco retail sales are prohibited within 100 m of schools in many large cities in China. However, little is known about the enforcement of this zoning regulation. The objectives of this study were to estimate tobacco retailers' compliance with the regulation, examine the density of tobacco retail stores, describe the types of tobacco products sold in stores and how they are marketed, and determine if there are displays of warning messages in retail stores around schools and in neighbourhoods in Changsha, China. Tobacco retail stores located within 200 m of 36 schools and 36 residential neighbourhoods were audited by trained students with a validated audit form. On average, there were about 3 tobacco retail stores within 100 m of the front entrance of schools. The density of the stores and the types of tobacco products sold in the stores were similar near schools and in neighbourhoods. Over one-fourth of the stores had exterior tobacco advertisements. Interior advertising was slightly less prevalent, and it was most prevalent among tobacco shops (62.5%). Tobacco displays that target children were pervasive, with about 83% of tobacco retail stores displaying cigarettes within 1 m of the floor and 59% displaying cigarettes within 0.3 m of toys and candy. About 40% of stores within 100 m of a school had a visible retail licence. Only 19.6% of the stores had a 'smoke-free' sign and 22.2% had a 'no sales to minors' sign. We observed low enforcement of the regulation that bans tobacco retail sales near schools and high prevalence of tobacco displays that target children in Changsha, China. Chinese officials should act to effectively enforce the regulation bans of tobacco sales near schools. In addition, regulations are urgently needed to limit tobacco marketing practices at the point of sale, especially those targeting youth. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. Genetic algorithm–based varying parameter linear quadratic regulator control for four-wheel independent steering vehicle

    Directory of Open Access Journals (Sweden)

    Linlin Gao

    2015-11-01

    Full Text Available From the perspective of vehicle dynamics, the four-wheel independent steering vehicle dynamics stability control method is studied, and a four-wheel independent steering varying parameter linear quadratic regulator control system is proposed with the help of expert control method. In the article, a four-wheel independent steering linear quadratic regulator controller for model following purpose is designed first. Then, by analyzing the four-wheel independent steering vehicle dynamic characteristics and the influence of linear quadratic regulator control parameters on control performance, a linear quadratic regulator control parameter adjustment strategy based on vehicle steering state is proposed to achieve the adaptive adjustment of linear quadratic regulator control parameters. In addition, to further improve the control performance, the proposed varying parameter linear quadratic regulator control system is optimized by genetic algorithm. Finally, simulation studies have been conducted by applying the proposed control system to the 8-degree-of-freedom four-wheel independent steering vehicle dynamics model. The simulation results indicate that the proposed control system has better performance and robustness and can effectively improve the stability and steering safety of the four-wheel independent steering vehicle.

  4. Price regulation and relative price convergence: Evidence from the retail gasoline market in Canada

    International Nuclear Information System (INIS)

    Suvankulov, Farrukh; Lau, Marco Chi Keung; Ogucu, Fatma

    2012-01-01

    This paper explores price regulation and relative price convergence in the Canadian retail gasoline market. We use monthly data (2000–2010) on retail gasoline prices in 60 Canadian cities to investigate (i) whether the retail gasoline market in Canada has experienced a relative price convergence to the mean, which is expected, given the increased economic integration across Canadian provinces; and (ii) whether the introduction of price regulation mechanisms in New Brunswick and Nova Scotia in July 2006 had any impact on the price convergence in these provinces. We use a nonlinear panel unit root test and find solid evidence that Canadian retail gasoline markets are well integrated across locales; however, the share of converging cities reveals a significant decline since July of 2006. The impact of price regulation on price convergence is mixed; our results indicate that since the enactment of the regulation in all New Brunswick cities (9) included in the dataset, gasoline prices converge to the national mean. Volatility of price is also significantly reduced. In contrast, in the wake of price regulation in Nova Scotia, all 6 cities of the province are non-convergent to the mean with increased volatility and overall price level. - Highlights: ► The paper examines price regulation and convergence of gasoline prices in Canada. ► Overall in 2000–2010 the Canadian retail gasoline market was well integrated. ► Price convergence across cities has significantly declined since July 2006. ► The impact of price regulation at province level on a price convergence is mixed. ► The paper relies on the most advanced nonlinear panel unit root test.

  5. Tools Related to the Federal Tobacco Products Regulations: What Retailers Need to Know PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2010-09-16

    PSA to announce a new mobile text message program that will help raise retailers' awareness of the new federal tobacco regulations.  Created: 9/16/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 9/16/2010.

  6. Regulating the sale of tobacco in New Zealand: A qualitative analysis of retailers' views and implications for advocacy.

    Science.gov (United States)

    Robertson, Lindsay; Marsh, Louise; Hoek, Janet; McGee, Rob; Egan, Richard

    2015-12-01

    In contrast to the sale of alcohol and other psychoactive substances, the retail availability of tobacco in New Zealand (NZ) is relatively unregulated. Tobacco is almost universally available, and the absence of a licensing scheme for tobacco retailers makes enforcement of retail-level legislation challenging. As a key stakeholder group, the views of tobacco retailers are likely to influence the tobacco retail policies that gain political support. We explored NZ tobacco retailers' views towards mandatory licensing of tobacco retailers, and how they perceived policies that would reduce tobacco availability. We conducted face-to-face interviews with tobacco retail store owners and managers throughout NZ (n=21). A semi-structured interview guide was used, and interviews explored participants' views of existing tobacco retail policies, the NZ government's goal of becoming a smokefree country by 2025, possible future policies, such as licensing of tobacco retailers, and perceptions of selling tobacco. Qualitative content analysis was conducted using the interview transcripts as the data source. The tobacco retailers interviewed expressed varying views on how tobacco sales should be regulated. Around half of the study participants were positive or indifferent about mandatory retailer licensing, and several believed licensing would not have a large impact on them. The idea of restricting the sale of tobacco within 500m of a school was generally well received by participants, and had more support than policies that would prohibit certain outlet types from selling tobacco. In contrast to claims made by industry-related organisations, a proposed licensing policy is unlikely to be met with blanket opposition from tobacco retailers. Advocacy efforts may garner more support for tobacco retail policies if the purpose of policies was framed in terms of protecting young people from smoking. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Competition, regulation, and pricing behaviour in the Spanish retail gasoline market

    International Nuclear Information System (INIS)

    Contin-Pilart, Ignacio; Correlje, Aad F.; Blanca Palacios, M.

    2009-01-01

    The restructuring of the Spanish oil industry produced a highly concentrated oligopoly in the retail gasoline market. In June 1990, the Spanish government introduced a system of ceiling price regulation in order to ensure that 'liberalization' was accompanied by adequate consumer protection. By 1998, prices were left to the 'free' market. This paper examines the pricing behaviour of the retail gasoline market using multivariate error correction models over the period January 1993 (abolishment of the state monopoly)-December 2004. The results suggest that gasoline retail prices respond symmetrically to increases as well as to decreases in the spot price of gasoline both over the period of price regulation (January 1993-September 1998) and over the period of free market (October 1998-December 2004). However, once the ceiling price regulation was abolished, cooperation emerged between the government and the major operators, Repsol-YPF and Cepsa-Elf, to control the inflation rate. This resulted in a slower rate of adjustment of gasoline retail prices when gasoline spot prices went up, as compared with the European pattern. Finally, the Spanish retail margin was by the end of our timing period of analysis, as in the starting years after the abolishment of the state monopoly, above the European average. This pattern confirms our political economic hypothesis, which suggests that the Spanish government and the oil companies were working together in reducing the inflation, in periods of rising oil and gasoline prices. It is also inferred that explaining the pricing pattern in energy markets may require different hypothesis than the classical perspective, involving just firms taking advantage of market power

  8. Competition, regulation, and pricing behaviour in the Spanish retail gasoline market

    Energy Technology Data Exchange (ETDEWEB)

    Contin-Pilart, Ignacio [Departamento de Gestion de Empresas, Universidad Publica de Navarra, Campus de Arrosadia, 31006 Pamplona (Spain); Correlje, Aad F. [Section Economics of Infrastructures, Faculty of Technology, Policy and Management, Delft University of Technology, P.O. Box 5015, 2600 GA Delft (Netherlands); Clingendael International Energy Programme (Netherlands); Blanca Palacios, M. [Departamento de Estadistica e Investigacion Operativa, Universidad Publica de Navarra, Campus de Arrosadia, 31006 Pamplona (Spain)

    2009-01-15

    The restructuring of the Spanish oil industry produced a highly concentrated oligopoly in the retail gasoline market. In June 1990, the Spanish government introduced a system of ceiling price regulation in order to ensure that 'liberalization' was accompanied by adequate consumer protection. By 1998, prices were left to the 'free' market. This paper examines the pricing behaviour of the retail gasoline market using multivariate error correction models over the period January 1993 (abolishment of the state monopoly)-December 2004. The results suggest that gasoline retail prices respond symmetrically to increases as well as to decreases in the spot price of gasoline both over the period of price regulation (January 1993-September 1998) and over the period of free market (October 1998-December 2004). However, once the ceiling price regulation was abolished, cooperation emerged between the government and the major operators, Repsol-YPF and Cepsa-Elf, to control the inflation rate. This resulted in a slower rate of adjustment of gasoline retail prices when gasoline spot prices went up, as compared with the European pattern. Finally, the Spanish retail margin was by the end of our timing period of analysis, as in the starting years after the abolishment of the state monopoly, above the European average. This pattern confirms our political economic hypothesis, which suggests that the Spanish government and the oil companies were working together in reducing the inflation, in periods of rising oil and gasoline prices. It is also inferred that explaining the pricing pattern in energy markets may require different hypothesis than the classical perspective, involving just firms taking advantage of market power. (author)

  9. Global control of reaction wheel pendulum through energy regulation and extended linearization of the state variables

    Directory of Open Access Journals (Sweden)

    Oscar D. Montoya-Giraldo

    2014-01-01

    Full Text Available This paper presents the design and simulation of a global controller for the Reaction Wheel Pendulum system using energy regulation and extended linearization methods for the state feedback. The proposed energy regulation is based on the gradual reduction of the energy of the system to reach the unstable equilibrium point. The signal input for this task is obtained from the Lyapunov stability theory. The extended state feedback controller design is used to get a smooth nonlinear function that extends the region of operation to a bigger range, in contrast with the static linear state feedback obtained through the method of approximate linearization around an operating point. The general designed controller operates with a switching between the two control signals depending upon the region of operation; perturbations are applied in the control signal and the (simulated measured variables to verify the robustness and efficiency of the controller. Finally, simulations and tests using the model of the reaction wheel pendulum system, allow to observe the versatility and functionality of the proposed controller in the entire operation region of the pendulum.

  10. Shopping for Society? Consumers’ Value Conflicts in Socially Responsible Consumption Affected by Retail Regulation

    OpenAIRE

    Jin-Myong Lee; Hyo-Jung Kim; Jong-Youn Rha

    2017-01-01

    Consumers have a dual role as economic actors who purchase products and as citizens comprising society. Thus, consumers may experience conflict between pursuing personal values (i.e., low price and high quality) and social values (i.e., equity and common good). In addition, these choices can be affected by governmental regulation of retail markets. This study aimed to identify consumer perspectives toward socially responsible consumption (SRC) in the choice of grocery store format and to inve...

  11. 76 FR 56103 - Retail Foreign Exchange Transactions; Conforming Changes to Existing Regulations in Response to...

    Science.gov (United States)

    2011-09-12

    ... off-exchange foreign currency transactions with members of the retail public (i.e., retail forex... various provisions of the CEA as amended by the Dodd-Frank Act with respect to retail forex transactions... counterparty to a retail forex transaction under CEA Section 2(c)(2)(B) (``permitted counterparty''), which...

  12. An empirical investigation of spatial differentiation and price floor regulations in retail markets for gasoline

    Science.gov (United States)

    Houde, Jean-Francois

    In the first essay of this dissertation, I study an empirical model of spatial competition. The main feature of my approach is to formally specify commuting paths as the "locations" of consumers in a Hotelling-type model of spatial competition. The main consequence of this location assumption is that the substitution patterns between stations depend in an intuitive way on the structure of the road network and the direction of traffic flows. The demand-side of the model is estimated by combining a model of traffic allocation with econometric techniques used to estimate models of demand for differentiated products (Berry, Levinsohn and Pakes (1995)). The estimated parameters are then used to evaluate the importance of commuting patterns in explaining the distribution of gasoline sales, and compare the economic predictions of the model with the standard home-location model. In the second and third essays, I examine empirically the effect of a price floor regulation on the dynamic and static equilibrium outcomes of the gasoline retail industry. In particular, in the second essay I study empirically the dynamic entry and exit decisions of gasoline stations, and measure the impact of a price floor on the continuation values of staying in the industry. In the third essay, I develop and estimate a static model of quantity competition subject to a price floor regulation. Both models are estimated using a rich panel dataset on the Quebec gasoline retail market before and after the implementation of a price floor regulation.

  13. Retail Price Model

    Science.gov (United States)

    The Retail Price Model is a tool to estimate the average retail electricity prices - under both competitive and regulated market structures - using power sector projections and assumptions from the Energy Information Administration.

  14. Shopping for Society? Consumers’ Value Conflicts in Socially Responsible Consumption Affected by Retail Regulation

    Directory of Open Access Journals (Sweden)

    Jin-Myong Lee

    2017-10-01

    Full Text Available Consumers have a dual role as economic actors who purchase products and as citizens comprising society. Thus, consumers may experience conflict between pursuing personal values (i.e., low price and high quality and social values (i.e., equity and common good. In addition, these choices can be affected by governmental regulation of retail markets. This study aimed to identify consumer perspectives toward socially responsible consumption (SRC in the choice of grocery store format and to investigate actual store choice behavior across consumer groups with those different perspectives while considering the role of retail regulation. For this purpose, we conducted a Q methodological study in which 30 South Korean consumers rank-ordered 40 statements regarding SRC. After performing Q factor analysis using PQ-Method software, we classified four distinctive consumer groups: “ethical conformist”, “market liberalist”, “ambivalent bystander”, and “internally conflicted”. After investigating similarities and differences between these consumer groups, we found major criteria for understanding consumer perspectives to SRC such as the priority of values pursued, the experience of a value-action gap, and internal conflicts in the decision-making process.

  15. Regulations as a Tool to Increase Consumer Protection on the European Retail Payment Market

    Directory of Open Access Journals (Sweden)

    Janina Harasim

    2018-03-01

    Full Text Available Aim/purpose - The purpose of the paper is to identify the main areas of customers' threats concerning using financial services and the in-depth review of European industry- -specific consumer regulations concerning current accounts and payments. Design/methodology/approach - Desk research including in-depth analysis of industry- specific consumer regulations referring to current accounts and payment services having the character of EU directives and regulations, European Commission reports, and documents. Findings - The paper shows that consumers' interests are threatened even when they use basic financial services as current account and combined payment instruments. The analysis based on of desk resources has revealed that the regulations give effect to customer protection only if they strictly correspond to defined areas of threats and particular types of risks. Research implications/limitations - The experience of the recent financial crisis proved that the asymmetry of knowledge and information was one of the crucial reasons disrupting customers' position on financial markets. Research findings will help to identify gaps in regulations and develop the quality of further initiatives aimed on informing customers about the implementation of regulations and improving their financial literacy level. Originality/value/contribution - The payment products are rarely discussed in the literature in the context of consumers' protection and financial regulations. This paper contributes to the debate by providing an overview of financial consumer protection issues concerning retail payments.(original abstract

  16. Testing optimal punishment mechanisms under price regulation : the case of the retail market for gasoline

    International Nuclear Information System (INIS)

    Gagne, R.; Versaevel, B.

    2003-01-01

    The effects of a price floor on price wars in the retail market for gasoline were analyzed. The authors selected a theoretical model which assumed a Bertrand oligopoly supergame, where firms initially collude by charging the monopolistic price. Once a deviation from this strategy is detected by the firms, a switch to a lower price is made in what can be called a punishment phase (price war), before returning to collusive prices. A natural experiment for the testing of the model was provided by the introduction of a price floor regulation in the Quebec retail market for gasoline in 1996. A Markov Switching Model with two latent states was used to simultaneously identify the periods of price-collusion/price war, and also to estimate the parameters which characterized each state. The results indicated that the intensity of price wars was reduced by the introduction of the price floor, but the expected duration of those wars was raised. 14 refs., 5 tabs., 1 fig

  17. Testing optimal punishment mechanisms under price regulation : the case of the retail market for gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Gagne, R. [Montreal Univ., Quebec, PQ (Canada). Ecole des Hautes Etudes Commerciales; Van Norden, S. [Montreal Univ., Quebec, PQ (Canada). Ecole des Hautes Etudes Commerciales]|[Centre for Interuniversity Research and Analysis on Organizations, Montreal, PQ (Canada); Versaevel, B.

    2003-09-01

    The effects of a price floor on price wars in the retail market for gasoline were analyzed. The authors selected a theoretical model which assumed a Bertrand oligopoly supergame, where firms initially collude by charging the monopolistic price. Once a deviation from this strategy is detected by the firms, a switch to a lower price is made in what can be called a punishment phase (price war), before returning to collusive prices. A natural experiment for the testing of the model was provided by the introduction of a price floor regulation in the Quebec retail market for gasoline in 1996. A Markov Switching Model with two latent states was used to simultaneously identify the periods of price-collusion/price war, and also to estimate the parameters which characterized each state. The results indicated that the intensity of price wars was reduced by the introduction of the price floor, but the expected duration of those wars was raised. 14 refs., 5 tabs., 1 fig.

  18. An Improved Path-Generating Regulator for Two-Wheeled Robots to Track the Circle/Arc Passage

    Directory of Open Access Journals (Sweden)

    Jun Dai

    2014-01-01

    Full Text Available The improved path-generating regulator (PGR is proposed to path track the circle/arc passage for two-wheeled robots. The PGR, which is a control method for robots so as to orient its heading toward the tangential direction of one of the curves belonging to the family of path functions, is applied to navigation problem originally. Driving environments for robots are usually roads, streets, paths, passages, and ridges. These tracks can be seen as they consist of straight lines and arcs. In the case of small interval, arc can be regarded as straight line approximately; therefore we extended the PGR to drive the robot move along circle/arc passage based on the theory that PGR to track the straight passage. In addition, the adjustable look-ahead method is proposed to improve the robot trajectory convergence property to the target circle/arc. The effectiveness is proved through MATLAB simulations on both the comparisons with the PGR and the improved PGR with adjustable look-ahead method. The results of numerical simulations show that the adjustable look-ahead method has better convergence property and stronger capacity of resisting disturbance.

  19. Is Italian regulation of Deceptive advertising Really Effective? A Content Analysis of the Authority’s Sentences (1999-2004) in Three Sectors: Mobile Communication, Cosmetics, Retailing

    OpenAIRE

    K. Premazzi

    2005-01-01

    Study involving a content analysis of the Italian Authority’s Sentences about deceptive advertising in the mobile communication, cosmetics, and retailing sector in the period 1999-2004, with the main aim to assess the effectiveness of the Italian regulation on this subject.

  20. Elevator wheel

    Energy Technology Data Exchange (ETDEWEB)

    Zhornik, V.I.; Cherkov, Ye.M.; Simonov, A.A.

    1982-01-01

    An elevator wheel is suggested for unloading a sunken product from a bath of a heavy-average separator including discs of a bucket with inner walls, and covering sheets hinged to the buckets. In order to improve the degree of dehydration of the removed product, the inner wall of each bucket is made of sheets installed in steps with gaps of one in relation to the other.

  1. Word wheels

    CERN Document Server

    Clark, Kathryn

    2013-01-01

    Targeting the specific problems learners have with language structure, these multi-sensory exercises appeal to all age groups including adults. Exercises use sight, sound and touch and are also suitable for English as an Additional Lanaguage and Basic Skills students.Word Wheels includes off-the-shelf resources including lesson plans and photocopiable worksheets, an interactive CD with practice exercises, and support material for the busy teacher or non-specialist staff, as well as homework activities.

  2. Regulating Tobacco Product Advertising and Promotions in the Retail Environment: A Roadmap for States and Localities.

    Science.gov (United States)

    Lange, Tamara; Hoefges, Michael; Ribisl, Kurt M

    2015-01-01

    Recent amendments to federal law and a burgeoning body of research have intensified public health officials' interest in reducing youth initiation of tobacco use, including by regulating the time, place, or manner of tobacco product advertising at the point of sale. This article analyzes legal obstacles to various strategies for reducing youth initiation. © 2015 American Society of Law, Medicine & Ethics, Inc.

  3. Chronic wheel running reduces maladaptive patterns of methamphetamine intake: regulation by attenuation of methamphetamine-induced neuronal nitric oxide synthase

    Science.gov (United States)

    Engelmann, Alexander J.; Aparicio, Mark B.; Kim, Airee; Sobieraj, Jeffery C.; Yuan, Clara J.; Grant, Yanabel

    2013-01-01

    We investigated whether prior exposure to chronic wheel running (WR) alters maladaptive patterns of excessive and escalating methamphetamine intake under extended access conditions, and intravenous methamphetamine self-administration-induced neurotoxicity. Adult rats were given access to WR or no wheel (sedentary) in their home cage for 6 weeks. A set of WR rats were injected with 5-bromo-2′-deoxyuridine (BrdU) to determine WR-induced changes in proliferation (2-h old) and survival (28-day old) of hippocampal progenitors. Another set of WR rats were withdrawn (WRw) or continued (WRc) to have access to running wheels in their home cages during self-administration days. Following self-administration [6 h/day], rats were tested on the progressive ratio (PR) schedule. Following PR, BrdU was injected to determine levels of proliferating progenitors (2-h old). WRc rats self-administered significantly less methamphetamine than sedentary rats during acquisition and escalation sessions, and demonstrated reduced motivation for methamphetamine seeking. Methamphetamine reduced daily running activity of WRc rats compared with that of pre-methamphetamine days. WRw rats self-administered significantly more methamphetamine than sedentary rats during acquisition, an effect that was not observed during escalation and PR sessions. WR-induced beneficial effects on methamphetamine self-administration were not attributable to neuroplasticity effects in the hippocampus and medial prefrontal cortex, but were attributable to WR-induced inhibition of methamphetamine-induced increases in the number of neuronal nitric oxide synthase expressing neurons and apoptosis in the nucleus accumbens shell. Our results demonstrate that WR prevents methamphetamine-induced damage to forebrain neurons to provide a beneficial effect on drug-taking behavior. Importantly, WR-induced neuroprotective effects are transient and continued WR activity is necessary to prevent compulsive methamphetamine intake

  4. Consumer views on safety of over-the-counter drugs, preferred retailers and information sources in Sweden: after re-regulation of the pharmacy market.

    Science.gov (United States)

    Westerlund, Tommy; Barzi, Sahra; Bernsten, Cecilia

    2017-01-01

    The availability of over-the-counter drugs (OTCs) has increased in Sweden since a re-regulation of the pharmacy market in 2009, through which non-pharmacy retailers became permitted to provide certain OTCs. To examine the adult general public's views on safety, purchasing and information channels, storage and disposal of OTCs in Sweden, three years after the re-regulation of the pharmacy market. A questionnaire study in 2012-13 in a stratified, random sample of all inhabitants in Sweden ≥ 18 years old. Totally 8,302 people (42%) answered the questionnaire. Seven percent found OTCs completely harmless regardless of how they are being used, 18% felt they should be used only on health professionals' recommendation. Differences in how OTCs are perceived were however found with regards to respondents' country of birth, family type, educational level and income. The pharmacy was still the preferred OTC drug retailer by 83% of the respondents and preferred information source by 80% Reasons for preferred retailers were primarily due to out of habit (45%), counseling provided (35%), the product range (34%) and the confidence in staff (27%). Analgesics are the most common OTCs to have at home (90%). The bathroom cabinet is the primary site for storage (42%) and 16% throw their OTC leftovers in the trash. The study population does not consider OTCs as harmless regardless of how they are used, but on the other hand feels they should not be taken on health professionals' recommendation only. The pharmacy is still the preferred retailer and information source, and there is room for further improvement in the storage and disposal of OTCs. A return of OTC drug leftovers to the pharmacy should be further encouraged. Due to several limitations, great caution should however be observed when generalizing the results to the adult population of Sweden.

  5. Consumer views on safety of over-the-counter drugs, preferred retailers and information sources in Sweden: after re-regulation of the pharmacy market

    Directory of Open Access Journals (Sweden)

    Westerlund T

    2017-03-01

    Full Text Available Background: The availability of over-the-counter drugs (OTCs has increased in Sweden since a re-regulation of the pharmacy market in 2009, through which non-pharmacy retailers became permitted to provide certain OTCs. Objective: To examine the adult general public’s views on safety, purchasing and information channels, storage and disposal of OTCs in Sweden, three years after the re-regulation of the pharmacy market. Methods: A questionnaire study in 2012-13 in a stratified, random sample of all inhabitants in Sweden ≥ 18 years old. Results: Totally 8,302 people (42% answered the questionnaire. Seven percent found OTCs completely harmless regardless of how they are being used, 18% felt they should be used only on health professionals’ recommendation. Differences in how OTCs are perceived were however found with regards to respondents’ country of birth, family type, educational level and income. The pharmacy was still the preferred OTC drug retailer by 83% of the respondents and preferred information source by 80% Reasons for preferred retailers were primarily due to out of habit (45%, counseling provided (35%, the product range (34% and the confidence in staff (27%. Analgesics are the most common OTCs to have at home (90%. The bathroom cabinet is the primary site for storage (42% and 16% throw their OTC leftovers in the trash. Conclusions: The study population does not consider OTCs as harmless regardless of how they are used, but on the other hand feels they should not be taken on health professionals’ recommendation only. The pharmacy is still the preferred retailer and information source, and there is room for further improvement in the storage and disposal of OTCs. A return of OTC drug leftovers to the pharmacy should be further encouraged. Due to several limitations, great caution should however be observed when generalizing the results to the adult population of Sweden.

  6. 29 CFR 1915.134 - Abrasive wheels.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Abrasive wheels. 1915.134 Section 1915.134 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... wheels shall fit freely on the spindle and shall not be forced on. The spindle nut shall be tightened...

  7. Retail competition

    International Nuclear Information System (INIS)

    1998-01-01

    Retail competition as the cornerstone of a competitive electricity marketplace was the subject of the seventh in the series of policy discussion papers developed at the Market Design Conference. Concern was expressed that because of the complexities involved in market design and technical implementation, the retail competition may lag behind other elements of the implementation of the new market design. A variety of key issues were debated, including the role of physical versus financial contracts, the form of retail competition and financial settlement systems in the short term, the requirement to separate 'competitive' (metering, billing, maintenance, consumer education) from non-competitive' (the transmission wires) services and the role of municipal electric utilities. It was agreed that the IMO should play an important role in defining and enforcing the separation of services, and that as a general rule, the development of policy in this area should be guided by the principle of maximizing the potential for competition

  8. Retail sales of scheduled listed chemical products; self-certification of regulated sellers of scheduled listed chemical products. Interim final rule with request for comment.

    Science.gov (United States)

    2006-09-26

    In March 2006, the President signed the Combat Methamphetamine Epidemic Act of 2005, which establishes new requirements for retail sales of over-the-counter (nonprescription) products containing the List I chemicals ephedrine, pseudoephedrine, and phenylpropanolamine. The three chemicals can be used to manufacture methamphetamine illegally. DEA is promulgating this rule to incorporate the statutory provisions and make its regulations consistent with the new requirements. This action establishes daily and 30-day limits on the sales of scheduled listed chemical products to individuals and requires recordkeeping on most sales.

  9. Wheel inspection system environment.

    Science.gov (United States)

    2008-11-18

    International Electronic Machines Corporation (IEM) has developed and is now marketing a state-of-the-art Wheel Inspection System Environment (WISE). WISE provides wheel profile and dimensional measurements, i.e. rim thickness, flange height, flange ...

  10. Unpackaged Cigarettes and Smokeless Tobacco: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    This podcast helps retailers understand new federal regulations surrounding the sale of unpackaged tobacco products. To comply with the law, retailers may not break open packages of cigarettes or smokeless tobacco to sell or distribute as single or smaller quantities.

  11. Retail Food Refrigeration and the Phaseout of HCFC-22

    Science.gov (United States)

    Provides information on the HCFC phaseout that is relevant to food retailers, including alternatives to the use of HCFC-22 in retail food refrigeration, other refrigerant regulations, and resources for more information.

  12. 76 FR 62327 - Retail Inventory Method

    Science.gov (United States)

    2011-10-07

    ... accounting. The regulations restate and clarify the computation of ending inventory values under the retail... method of accounting for inventories must clearly reflect income. Section 1.471-2(c) provides that the...-retail ratio, or cost complement. The numerator of the cost complement is the value of beginning...

  13. Mobile Business Retailing: Driving Experiential Learning on Campus

    Science.gov (United States)

    Fischbach, Sarah; Guerrero, Veronica

    2018-01-01

    Engaging students in the classroom is a struggle all faculty face especially in the age of modern technology. This article proposes a novel approach to engage and motivate students through the mobile business "on wheels" marketing concept. The growth in mobile business retailing (e.g., food trucks, mobile dog groomers, etc.) is an…

  14. Grinding Wheel System

    Science.gov (United States)

    Malkin, Stephen; Gao, Robert; Guo, Changsheng; Varghese, Biju; Pathare, Sumukh

    2003-08-05

    A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

  15. Weighted Average Cost of Retail Gas (WACORG) highlights pricing effects in the US gas value chain: Do we need wellhead price-floor regulation to bail out the unconventional gas industry?

    International Nuclear Information System (INIS)

    Weijermars, Ruud

    2011-01-01

    The total annual revenue stream in the US natural gas value chain over the past decade is analyzed. Growth of total revenues has been driven by higher wellhead prices, which peaked in 2008. The emergence of the unconventional gas business was made possible in part by the pre-recessional rise in global energy prices. The general rise in natural gas prices between 1998 and 2008 did not lower overall US gas consumption, but shifts have occurred during the past decade in the consumption levels of individual consumer groups. Industry's gas consumption has decreased, while power stations increased their gas consumption. Commercial and residential consumers maintained flat gas consumption patterns. This study introduces the Weighted Average Cost of Retail Gas (WACORG) as a tool to calculate and monitor an average retail price based on the different natural gas prices charged to the traditional consumer groups. The WACORG also provides insight in wellhead revenues and may be used as an instrument for calibrating retail prices in support of wellhead price-floor regulation. Such price-floor regulation is advocated here as a possible mitigation measure against excessive volatility in US wellhead gas prices to improve the security of gas supply. - Highlights: → This study introduces an average retail price, WACORG. → WACORG can monitor price differentials for the traditional US gas consumer groups. → WACORG also provides insight in US wellhead revenues. → WACORG can calibrate retail prices in support of wellhead price-floor regulation. → Gas price-floor can improve security of gas supply by reducing price volatility.

  16. The Reaction Wheel Pendulum

    CERN Document Server

    Block, Daniel J; Spong, Mark W

    2007-01-01

    This monograph describes the Reaction Wheel Pendulum, the newest inverted-pendulum-like device for control education and research. We discuss the history and background of the reaction wheel pendulum and other similar experimental devices. We develop mathematical models of the reaction wheel pendulum in depth, including linear and nonlinear models, and models of the sensors and actuators that are used for feedback control. We treat various aspects of the control problem, from linear control of themotor, to stabilization of the pendulum about an equilibrium configuration using linear control, t

  17. A Nontoxic Barlow's Wheel

    Science.gov (United States)

    Daffron, John A.; Greenslade, Thomas B.

    2015-01-01

    Barlow's wheel has been a favorite demonstration since its invention by Peter Barlow (1776-1862) in 1822.1 In the form shown in Fig. 1, it represents the first electric motor. The interaction between the electric current passing from the axle of the wheel to the rim and the magnetic field produced by the U-magnet produces a torque that turns the wheel. The original device used mercury to provide electrical contact to the rim, and the dangers involved with the use of this heavy metal have caused the apparatus to disappear from the lecture hall.

  18. Wheeled hopping robot

    Science.gov (United States)

    Fischer, Gary J [Albuquerque, NM

    2010-08-17

    The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

  19. 電信零售價格調整上限制之研究 Comparative Study on the Price Cap Regulation of Telecom Retail Services

    Directory of Open Access Journals (Sweden)

    劉孔中 Kung-Chung Liu

    2007-12-01

    Full Text Available 各國自1980 年代開始自由化電信市場時,紛紛改採用較具有效率誘因的價格調整上限法管制零售價格,以電信業者技術或服務創新所帶來的效率增加⎯⎯所謂的效率因子或調整係數X 值⎯⎯扣除通貨膨脹或其他總體經濟變數變動後之數值,作為其調整價格之上限。國家通訊傳播委員會(NCC)審酌電信事業生產經營效率、各國費率水平及平均降幅、各國監理機關所訂X 值範圍及保障消費者權益等五個因素,於2006 年底公告新的X 值:ADSL電路出租為△CPI + 5.35%,900 兆赫及1800 兆赫行動電話業務中市話撥打行動電話的服務、預付資費方式的服務及月租型服務之不同費率選單中通信費單價最高者,均為△CPI + 4.88%。本文回顧實施零售價格調整上限制最有經驗的英國與美國聯邦(而不包括各州的零售價格管制),發現該制均盛極而衰,走向結束。本文檢討NCC 調整X 值之作法中三點可檢討之處:1.未要求中華電信舉證其ADSL 之成本與利潤,錯失進一步合理降低ADSL 價格的機會;2.要求連續三年調降月租型行動電話服務不同費率選單中通信費單價最高通信費4.88%,並非針對競爭不足的特定業務;3.未充分說明調整係數 X 之組成元素。本文最後點出事前管制零售價格的必要性會日益降低,故應該加強電信業者間資費管制的研究與規範。 When liberalizing telecom markets in the 1980s, countries world over adopted the price cap regime to regulate retail prices that telecom companies may charge their customers. Under price cap telecom companies may not raise the retail prices above the level where efficiency gains—commonly known as the efficiency factor or X factor-minus inflation rate. The National Communications Commission (NCC promulgated new X factors for various telecom services at the end of 2006: X for ADSL is

  20. Wheeling in Canada

    International Nuclear Information System (INIS)

    Fytche, E.L.

    1991-01-01

    The quest for economic efficiency, or lowest cost, in the electricity supply industry is furthered by trading between high and low cost utilities, one aspect being transporting or wheeling power through the transmission system of a third party. Some of the pressures and constraints limiting wheeling are discussed. A simple formula is presented for determining whether trading and wheeling are worthwhile. It is demonstrated for assumed capital and operating cost levels, the viability of nine cases where bulk power or economy energy would need to be wheeled across provincial boundaries in order to reach potential buyers. Wheeling in Canada is different from the situation in the USA, due to large distances spanned by Canadian utilities and because most are provincial crown corporations, with different territorial interests and profit motivations than investor-owned utilities. Most trading in electricity has been between contiguous neighbours, for mutual advantage. New technology allows power transmission over distances of up to 1000 miles, and the economics of Canada's electrical supply could be improved, with means including access to low cost coal of Alberta, and remote hydro in British Columbia, Manitoba, Quebec and Labrador. Nuclear plants could be located anywhere but suffer from an unfriendly public attitude. A bridge across the Prairies appears uneconomic due to cost of transmission, and also due to low valuation given to Alberta coal. 7 refs., 2 figs., 3 tabs

  1. The hydraulic wheel

    International Nuclear Information System (INIS)

    Alvarez Cardona, A.

    1985-01-01

    The present article this dedicated to recover a technology that key in disuse for the appearance of other techniques. It is the hydraulic wheel with their multiple possibilities to use their energy mechanical rotational in direct form or to generate electricity directly in the fields in the place and to avoid the high cost of transport and transformation. The basic theory is described that consists in: the power of the currents of water and the hydraulic receivers. The power of the currents is determined knowing the flow and east knowing the section of the flow and its speed; they are given you formulate to know these and direct mensuration methods by means of floodgates, drains and jumps of water. The hydraulic receivers or properly this hydraulic wheels that are the machines in those that the water acts like main force and they are designed to transmit the biggest proportion possible of absolute work of the water, the hydraulic wheels of horizontal axis are the common and they are divided in: you rotate with water for under, you rotate with side water and wheels with water for above. It is analyzed each one of them, their components are described; the conditions that should complete to produce a certain power and formulate them to calculate it. There are 25 descriptive figures of the different hydraulic wheels

  2. STUDY ON RETAIL BRAND AWARENESS IN RETAIL

    Directory of Open Access Journals (Sweden)

    Dabija Dan Cristian

    2011-12-01

    Full Text Available Brand awareness, together with other behavioural indicators (sympathy, trust, image, satisfaction or loyalty, is one of the main vectors that has an essential contribution to the outline of brand equity in general and to that of retail brand, in particular. The perception upon these indicators must be taken into consideration by production, service or retail companies in order to be able to identify their position on target markets, and in order to be able to create an adequate strategy that would help them reach the desired positioning. The aim of this paper is, on one hand, to reveal both the dimensions of brand awareness, and the relationship between these and consumers brand perception and, on the other hand, to offer a suitable instrument to measure awareness level of various retail chains. Questioning of almost 4.000 consumers indicates a significant awareness of the retailers that have been on the selected market for a longer period of time.

  3. POLICIES OF RETAIL SECTOR OF INDIA AND OTHER SELECTED COUNTRIES

    Directory of Open Access Journals (Sweden)

    Mukherjee Subhadip

    2011-12-01

    Full Text Available The retail sector is one of the fastest growing sectors in India. Before 1991, the retail sector was mainly unorganized and fragmented. The rapid growth of the organized retail sector has resulted in the decreasing sales of unorganized retail outlets. Along with that, the traditional unorganized retailers were lagging behind in the context of promotional strategies. This study intends to examine the government policies of different countries including India regarding the unorganized and organized retail sector. The present study examines whether the government provides a tight legal framework along with economic support to the small and unorganized retailers to sustain in this big fight. The study concludes that in the environment of intense competition, governments of different countries (including India had helped small as well as big domestic retail chains through formulating appropriate policies over time. The governments had helped domestic retail chains by providing capital support and/or formulating strict legislations to restrict entry of foreign retailers in their respective countries. In India, all the regulations regarding retail sector is still in state level and is being influenced by the existing political parties of different states. Thus, it varies across states and their impacts are also heterogeneous.

  4. New frontier, new power: the retail environment in Australia's dark market.

    Science.gov (United States)

    Carter, S M

    2003-12-01

    To investigate the role of the retail environment in cigarette marketing in Australia, one of the "darkest" markets in the world. Analysis of 172 tobacco industry documents; and articles and advertisements found by hand searching Australia's three leading retail trade journals. As Australian cigarette marketing was increasingly restricted, the retail environment became the primary communication vehicle for building cigarette brands. When retail marketing was restricted, the industry conceded only incrementally and under duress, and at times continues to break the law. The tobacco industry targets retailers via trade promotional expenditure, financial and practical assistance with point of sale marketing, alliance building, brand advertising, and distribution. Cigarette brand advertising in retail magazines are designed to build brand identities. Philip Morris and British American Tobacco are now competing to control distribution of all products to retailers, placing themselves at the heart of retail business. Cigarette companies prize retail marketing in Australia's dark market. Stringent point of sale marketing restrictions should be included in any comprehensive tobacco control measures. Relationships between retailers and the industry will be more difficult to regulate. Retail press advertising and trade promotional expenditure could be banned. In-store marketing assistance, retail-tobacco industry alliance building, and new electronic retail distribution systems may be less amenable to regulation. Alliances between the health and retail sectors and financial support for a move away from retail dependence on tobacco may be necessary to effect cultural change.

  5. Strategy for Addressing the Retail Sector under the Resource Conservation and Recovery Act's Regulatory Framework

    Science.gov (United States)

    The Retail Strategy lays out a cohesive and effective plan to address the unique challenges the retail sector has with complying with the hazardous waste regulations while reducing burden and protecting human health and the environment.

  6. Costs associated with wheeling

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Wheeling costs are incurred by all companies that experience a change in power flows over their transmission lines during a specific transaction, whether or not the lines of that company are part of the contract path. The costs of providing wheeling service differ from one system to another and from one kind of wheeling transaction to another. While most transactions may be completed using existing capacity, others may require an increase in line. Depending on the situation, some cost components may be high, low, negative, or not incurred at all. This article discusses two general categories of costs; transactional and capital. The former are all operation, maintenance and opportunity costs incurred in completing a specific transaction assuming the existence of adequate capacity. Capital costs are the costs of major new equipment purchases and lines necessary to provide any increased level of transmission services

  7. Rethinking retailer buying behaviour

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    2001-01-01

    Research of retailer buying behaviour has previously focused on the buying decision. In this paper a new approach to studying retailer buying behaviour is suggested, one which focuses on the sensemaking processes leading up to a decision being made. A research project taking a sensemaking...... perspective is outlined and the implications and expected contribution of studying retailer buying behaviour from a sensemaking perspective are discussed....

  8. THE RETAIL CONCENTRATION AND CHANGES OF THE GROCERY RETAIL STRUCTURE

    OpenAIRE

    Knežević, Blaženka; Knego, Nikola; Delić, Mia

    2014-01-01

    Concentration is one of several key processes that are taking place in retail markets of the European countries. Retail concentration process occurs in all EU countries and it’s manifested with the decreasing number of leading retailers with simultaneous increase in their market share. Undergoing process of retail market concentration is bringing new challenges to all market participants: suppliers, existing retailers and customers. In this paper we will discuss concentration in retail indust...

  9. 15 CFR 400.45 - Retail trade.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Retail trade. 400.45 Section 400.45 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) FOREIGN-TRADE ZONES BOARD, DEPARTMENT OF COMMERCE REGULATIONS OF THE FOREIGN-TRADE ZONES BOARD Zone Operations and...

  10. Color Wheel Windows

    Science.gov (United States)

    Leonard, Stephanie

    2012-01-01

    In this article, the author describes a painting and drawing lesson which was inspired by the beautiful circular windows found in cathedrals and churches (also known as "rose windows"). This two-week lesson would reinforce both the concept of symmetry and students' understanding of the color wheel. (Contains 1 online resource.)

  11. Atomic Ferris wheel beams

    Science.gov (United States)

    Lembessis, Vasileios E.

    2017-07-01

    We study the generation of atom vortex beams in the case where a Bose-Einstein condensate, released from a trap and moving in free space, is diffracted from a properly tailored light mask with a spiral transverse profile. We show how such a diffraction scheme could lead to the production of an atomic Ferris wheel beam.

  12. Retailer buying behaviour: A review

    DEFF Research Database (Denmark)

    Hansen, Tommy Holm; Skytte, Hans

    1998-01-01

    With centralised buying organisations, growth in market coverage and turn over retailers have become gatekeepers to the consumer markets. Therefore, knowledge about retailers' and trade buyers' buying behaviour has become important to producers. W review the literature on retailer buying behaviour...... committees, the relationship with manufacturers, European buying alliances, the use of information, retail buyer task, sales man influences, acce of trade deals, country or origin effects and new information technology. Keywords Retailer buying behaviour, review, buying criteria, retailing, assortment...

  13. New frontier, new power: the retail environment in Australia's dark market

    Science.gov (United States)

    Carter, S

    2003-01-01

    Objective: To investigate the role of the retail environment in cigarette marketing in Australia, one of the "darkest" markets in the world. Design: Analysis of 172 tobacco industry documents; and articles and advertisements found by hand searching Australia's three leading retail trade journals. Results: As Australian cigarette marketing was increasingly restricted, the retail environment became the primary communication vehicle for building cigarette brands. When retail marketing was restricted, the industry conceded only incrementally and under duress, and at times continues to break the law. The tobacco industry targets retailers via trade promotional expenditure, financial and practical assistance with point of sale marketing, alliance building, brand advertising, and distribution. Cigarette brand advertising in retail magazines are designed to build brand identities. Philip Morris and British American Tobacco are now competing to control distribution of all products to retailers, placing themselves at the heart of retail business. Conclusions: Cigarette companies prize retail marketing in Australia's dark market. Stringent point of sale marketing restrictions should be included in any comprehensive tobacco control measures. Relationships between retailers and the industry will be more difficult to regulate. Retail press advertising and trade promotional expenditure could be banned. In-store marketing assistance, retail–tobacco industry alliance building, and new electronic retail distribution systems may be less amenable to regulation. Alliances between the health and retail sectors and financial support for a move away from retail dependence on tobacco may be necessary to effect cultural change. PMID:14645954

  14. Canadian ethanol retailers' directory

    International Nuclear Information System (INIS)

    1998-06-01

    This listing is a directory of all ethanol-blended gasoline retailers in Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia, and the Yukon. The listing includes the name and address of the retailer. Bulk purchase facilities of ethanol-blended fuels are also included, but in a separate listing

  15. Canada's ethanol retail directory

    International Nuclear Information System (INIS)

    1996-11-01

    A directory was published listing all ethanol-blended gasoline retailers in Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia, and the Yukon. The listings include the name and address of the retailer. A list of bulk purchase facilities of ethanol-blended fuels is also included

  16. Retail markets. Electricity and natural gas retail markets Observatory 2. Quarter 2014

    International Nuclear Information System (INIS)

    2014-06-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  17. Retail markets. Electricity and natural gas retail markets Observatory 4. Quarter 2013

    International Nuclear Information System (INIS)

    2013-12-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  18. Retail markets. Electricity and natural gas retail markets Observatory 1. Quarter 2014

    International Nuclear Information System (INIS)

    2014-03-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  19. Retail markets. Electricity and natural gas retail markets Observatory 1. Quarter 2015

    International Nuclear Information System (INIS)

    2015-03-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  20. Retail markets. Electricity and natural gas retail markets Observatory 3. Quarter 2015

    International Nuclear Information System (INIS)

    2015-09-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  1. Retail markets. Electricity and natural gas retail markets Observatory 4. Quarter 2015

    International Nuclear Information System (INIS)

    2015-12-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  2. Retail markets. Electricity and natural gas retail markets Observatory 1. Quarter 2016

    International Nuclear Information System (INIS)

    2016-03-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  3. Retail markets. Electricity and natural gas retail markets Observatory 2. Quarter 2015

    International Nuclear Information System (INIS)

    2015-06-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  4. Retail markets. Electricity and natural gas retail markets Observatory 3. Quarter 2014

    International Nuclear Information System (INIS)

    2014-09-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  5. Retail markets. Electricity and natural gas retail markets Observatory 3. Quarter 2013

    International Nuclear Information System (INIS)

    2013-09-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  6. Retail markets. Electricity and natural gas retail markets Observatory 4. Quarter 2014

    International Nuclear Information System (INIS)

    2014-12-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  7. Electronic Cigarette Retail Outlets and Proximity to Schools.

    Science.gov (United States)

    Hahn, Ellen J; Begley, Kathy; Gokun, Yevgeniya; Johnson, Andrew O; Mundy, Monica E; Rayens, Mary Kay

    2015-01-01

    To compare the retail distribution and density per population of electronic and conventional cigarettes in smoke-free communities with and without e-cigarette restrictions. A cross-sectional study with field observations of retail tobacco stores. Two Central Kentucky counties with 100% smoke-free workplace regulations; counties selected on the basis of whether e-cigarette use was restricted. Fifty-seven tobacco retailers in two counties, including conventional retailers and stand-alone e-cigarette stores. Type and location of store and products sold; addresses of stores and schools geocoded with ArcGIS. Bivariate comparisons between counties, rates and confidence intervals for frequency of tobacco retailers and e-cigarette stores per population. Fifty-three percent of tobacco retailers sold e-cigarettes. E-cigarette availability did not differ by whether smoke-free regulation covered e-cigarettes. Rates of tobacco retailers and e-cigarette distributors per 10,000 were 8.29 and 4.40, respectively, in the two-county area. Of the 40 schools, 88% had a tobacco retailer and 68% had an e-cigarette distributor within 1 mile. In this exploratory study, e-cigarette use restriction was not related to store availability. For a relatively new product, e-cigarettes were readily available in retail outlets and close to schools.

  8. The Evolution and Future of Retailing and Retailing Education

    Science.gov (United States)

    Grewal, Dhruv; Motyka, Scott; Levy, Michael

    2018-01-01

    The pace of retail evolution has increased dramatically, with the spread of the Internet and as consumers have become more empowered by mobile phones and smart devices. This article outlines significant retail innovations that reveal how retailers and retailing have evolved in the past several decades. In the same spirit, the authors discuss how…

  9. Canadian retail petroleum markets study

    International Nuclear Information System (INIS)

    Ervin, M.J.

    1998-02-01

    A retail petroleum market study was conducted to provide a comprehensive overview of the competitiveness of the downstream petroleum industry in Canada and to set a foundation for effective policy development. The downstream petroleum industry, which includes the petroleum refining and marketing sectors, faces a poor public image, competitive pressures from U.S. and offshore refiners, and a broad range of environmental challenges. In this study, 19 markets representing a wide range of conditions were chosen for a detailed review of outlet economics. A market-by-market and regional comparisons of key competitiveness indicators was made in order to identify market and regional competitive differences as potential issues or opportunities within the industry. The study also included a pump price/margin model and provided a general overview of the retail gasoline sub-sector in terms of infrastructure. A review of prices, margins and demand patterns over the past several years was also undertaken to show the relationship between consumer demand patterns and pump price fluctuations. The study presented 22 findings which led to several conclusions and recommendations regarding the competitiveness of Canada's petroleum marketing sector. Two of the key conclusions were that taxation is a significant factor in the price of retail gasoline (about 50 per cent) and that government intervention into petroleum marketing is likely to be a poor alternative to market-based regulation. 18 tabs., 37 figs

  10. Wheels With Sense

    Science.gov (United States)

    Cambridge, Dwayne; Clauss, Douglas; Hewson, Fraser; Brown, Robert; Hisrich, Robert; Taylor, Cyrus

    2002-10-01

    We describe a student intrapreneurial project in the Physics Entrepreneurship Program at Case Western Reserve University. At the request of a major fortune 100 company, a study has been made of the technical and marketing issues for a new business of selling sensors on commercial vehicle wheels for monitoring pressure, temperature, rotations, and vibrations, as well as providing identification. The nature of the physics involved in the choice of the appropriate device such as capacitive or piezoresistive sensors is discussed, along with the possibility of MEMS (micro-electro-mechanical systems) technology and RFID (radiofrequency identification) readout on wheels. Five options (status quo, in-house development, external business acquisition, a large business national partnership, and a small-business Cleveland consortium partnership) were studied from both technological and business perspectives to commercialize the technology. The decision making process for making a choice is explained.

  11. Diabetes education on wheels.

    Science.gov (United States)

    Hardway, D; Weatherly, K S; Bonheur, B

    1993-01-01

    Diabetes education programs remain underdeveloped in the pediatric setting, resulting in increased consumer complaints and financial liability for hospitals. The Diabetes Education on Wheels program was designed to provide comprehensive, outcome-oriented education for patients with juvenile diabetes. The primary goal of the program was to enhance patients' and family members' ability to achieve self-care in the home setting. The program facilitated sequential learning, improved consumer satisfaction, and promoted financial viability for the hospital.

  12. Local Retailers Response to Retail Internationalisation:Malaysia Perspective

    OpenAIRE

    Wong, Poh Ling

    2005-01-01

    This paper explores the entirety of grocery retail internationalisation, and the happening in the Malaysian Grocery Retail. The results of a field study suggest that local retailers were generally optimistic about the industry in the next ten years, and the examination on their strategic behaviour in the face of grocery retail internationalisation suggests that local retailers have learned and understood the need for modernised strategies in their strategic posture as well as their competitiv...

  13. Retail Price Levels and Concentrations of Wholesalers, Retailers and Hypermarkets

    OpenAIRE

    Asplund, Marcus; Friberg, Richard

    1999-01-01

    This paper examines retail grocery price levels with a very large (unbalanced) panel of stores that operate in well-defined local markets. We explain price variation across grocery retailers by the concentration of wholesalers and retailers, and the market share of hypermarkets (and control for a number of store and region specific factors). Our most important result is that concentration at the wholesale level is an important determinant of retail prices. The price effect of retail concentra...

  14. Making working in retailing interesting

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Buck, Nuka; Grunert, Klaus G.

    2010-01-01

    This paper is about how five retail chains in the Danish grocery industry attempt to make low-wage, low-status store-level retail jobs as checkout operators and sales assistants interesting from the perspective of both retailers and employees. Following analysis of the social and institutional...... and make store-level retail jobs interesting to them. Although retailers mainly focus their attention on career seekers, we find that working in retailing is interesting for all employee types because the retailers are currently able to meet their respective motivations and aspirations. Nevertheless, we...

  15. The Danish Retail Market

    DEFF Research Database (Denmark)

    Aastrup, Jesper; Bjerre, Mogens; Kornum, Niels

    2010-01-01

    This paper presents an overview of the Danish retail market. A detailed picture of the Danish grocery sector is provided, and we highlight issues from the specialty sectors of fashion and DIY as well as patterns of internationalisation among Danish retailers. We further profile the Danish consumer...... in terms of consumption patterns and demographic changes as well as some specific consumer tendencies with a special emphasis on sustainability issues. E-commerce is taken up as a special theme, both profiling the consumer side and the retailer side. This part is exemplified with books and groceries...

  16. 49 CFR 570.10 - Wheel assemblies.

    Science.gov (United States)

    2010-10-01

    ... bead through one full wheel revolution and note runout in excess of one-eighth of an inch. (c) Mounting... 49 Transportation 6 2010-10-01 2010-10-01 false Wheel assemblies. 570.10 Section 570.10... Pounds or Less § 570.10 Wheel assemblies. (a) Wheel integrity. A tire rim, wheel disc, or spider shall...

  17. Tracked Vehicle Road Wheel Puller

    Science.gov (United States)

    2009-02-01

    employed for removing smaller-size components, such as bolts and the like. U.S. Patent No. 5,410,792, issued to Freeman (3), discloses a caster wheel ...separation of the rubberized annular layer from the outer annular surface of the wheel . Figure 5 further illustrates a modification of the wheel puller...2001. 2. Rubino et al. Pulling Tool. U.S. Patent 5,479,688, 1996. 3. Freeman. Caster Wheel Axle Extraction Apparatus. U.S. Patent 5,410,792

  18. Retail Spending Potential

    Data.gov (United States)

    City and County of Durham, North Carolina — This map shows the average household spending potential for retail goods in the United States in 2012. Spending potential data measures household consumer spending...

  19. Environmental Retail Supply Chains

    DEFF Research Database (Denmark)

    Kotzab, Herbert; Munch, Hilde; de Faultrier, Birgitte

    2011-01-01

    which were grouped into eight categories; they refer to “fundamental environmental attitude”, “use of energy”, “use of input material”, “product”, “packaging”, “transport”, “consumption” and “waste”. The level of environmental supply chain management can be characterised as very operational and very...... short-term oriented (green operations). Long-term oriented green design initiatives were hardly observed. Furthermore, the specific environmental activities of three retailers from Denmark, France and the UK were compared. Research limitations/implications – The empirical study investigates supply chain...... operations of retailers and excludes other areas of retail management. The results are based on material that is published by the respective companies and thus do not include internal reports. Originality/value – The main contribution of this paper is to test the proposition that global retailers follow...

  20. Ethics in retail business

    OpenAIRE

    VONDRUŠKA, Leoš

    2013-01-01

    The aim of this study was to assess the current state of ethics in retail establishments and to find suitable solutions to improve the situation. In literary part I described the important concepts of business ethics, moral, ethics, social responsibility. I also dealt with business ethics and implementation of codes of conduct, which I explained in more detail in the practical part. In the practical part, I examined the ethical codes of retail companies and for better illustrative there is a ...

  1. Wheel speed management control system for spacecraft

    Science.gov (United States)

    Goodzeit, Neil E. (Inventor); Linder, David M. (Inventor)

    1991-01-01

    A spacecraft attitude control system uses at least four reaction wheels. In order to minimize reaction wheel speed and therefore power, a wheel speed management system is provided. The management system monitors the wheel speeds and generates a wheel speed error vector. The error vector is integrated, and the error vector and its integral are combined to form a correction vector. The correction vector is summed with the attitude control torque command signals for driving the reaction wheels.

  2. Mechanical Design Engineering Enabler Project wheel and wheel drives

    Science.gov (United States)

    Nutt, Richard E.; Couch, Britt K.; Holley, John L., Jr.; Garris, Eric S.; Staut, Paul V.

    1992-01-01

    Our group was assigned the responsibility of designing the wheel and wheel drive system for a proof-of-concept model of the lunar-based ENABLER. ENABLER is a multi-purpose, six wheeled vehicle designed to lift and transport heavy objects associated with the construction of a lunar base. The resulting design was based on the performance criteria of the ENABLER. The drive system was designed to enable the vehicle to achieve a speed of 7 mph on a level surface, climb a 30 percent grade, and surpass a one meter high object and one meter wide crevice. The wheel assemblies were designed to support the entire weight of the vehicle on two wheels. The wheels were designed to serve as the main component of the vehicle's suspension and will provide suitable traction for lunar-type surfaces. The expected performance of the drive system for the ENABLER was influenced by many mechanical factors. The expected top speed on a level sandy surface is 4 mph instead of the desired 7 mph. This is due to a lack of necessary power at the wheels. The lack of power resulted from dimension considerations that allowed only an eight horsepower engine and also from mechanical inefficiencies of the hydraulic system. However, the vehicle will be able to climb a 30 percent grade, surpass a one meter high object and one meter wide crevice. The wheel assemblies will be able to support the entire weight of the vehicle on two wheels. The wheels will also provide adequate suspension for the vehicle and sufficient traction for lunar-type surfaces.

  3. Modern food retailing buying behaviour in Africa

    DEFF Research Database (Denmark)

    Nandonde, Felix Adamu; Kuada, John

    2016-01-01

    by the overlapping food certification requirements of various government agencies, which impose limitations on the buyers’ decision. Due to the exploratory nature of the study and its focus on the context of a particular geographical marketplace, the findings may not be generalizable to other countries. Originality......Purpose – The purpose of this paper is to explore modern food retail buyers’ behaviour in developing economies using the case of Tanzania. This paper provides an insight into the decision-making practice of modern food retail buyers’ behaviour in emerging modern food distribution systems, where...... the buying task involves balancing the retailer’s commercial interests with more stringent government regulations that shape food business in the region. Design/methodology/approach – A qualitative case study approach was used for the study. The researcher used semi-structured interviews with retailers...

  4. Retail innovation technologies

    Directory of Open Access Journals (Sweden)

    Vasile Dinu

    2015-05-01

    Full Text Available Commerce, as an important industry of any national economy, is a socially important complex of activities, which has to correspond to the general level of development and civilization of the community it serves. Considering this, the essential priorities commercial activity will turn to are represented by the increased power that consumers get through better informing, the assurance of a better connection between retail and innovation, more equitable and sustainable commercial relationships along the purchase chain, the improvement of retail services accessibility, the creation of a better work environment through the better correlation between employers’ needs and employers’ competences. Retail is permanently adapting to the changing market conditions, remaining a high competitive sector. Modern buyer is hurried, more mobile, better informed; more concerned about health, environment, comfort and aesthetics issues, more demanding in terms of quality and level of customization. Population migration, urbanization, and ageing, its absolute decrease, the average households size reduction, are all demographic trends to which retail must provide an appropriate answer. Retail businesses operating costs tend to increase, while buyers are warier under the impact of the global financial crisis, which will put additional pressure on profit margins.

  5. Impact of state policy on forming the competitiveness of retail trade in Russia

    Directory of Open Access Journals (Sweden)

    Regina Rafailevna Salikhova

    2015-06-01

    Full Text Available Objective to estimate the efficiency of the state regulation of retail trade and its influence on the formation of competitive advantage in retailing. Method logicalmathematical. Results the article considers the methods of retail trade regulation. The factors constraining the business activity of retail chains are analyzed the factors constraining the business activity of retail networks are revealed. The activities are proposed that would contribute to improving the competitiveness of domestic trade of Russia. Scientific novelty econometric model has been built that includes 8 factors. Within the model the influence of the studied factors on retail chains turnover is defined. Practical value the possibility to apply the obtained results to increase the efficiency of retail trade enterprises and consequently their competitiveness. nbsp

  6. Innovations in retail business models

    NARCIS (Netherlands)

    Sorescu, A.; Frambach, R.T.; Singh, J.; Rangaswamy, A.; Bridges, C.

    2011-01-01

    A retail business model articulates how a retailer creates value for its customers and appropriates value from the markets. Innovations in business models are increasingly critical for building sustainable advantage in a marketplace defined by unrelenting change, escalating customer expectations,

  7. An elevator wheel

    Energy Technology Data Exchange (ETDEWEB)

    Zhornik, V.I.; Cherkov, Ye.M.; Simonov, A.A.

    1982-01-01

    This invention deals with mineral enrichment and is primarily for unloading submerged products of enrichment during separation in heavy mediums. An elevator wheel is proposed for unloading the submerged product from the bath of a heavy to medium separator which includes ladle disks with internal walls and overlapping sheets hinged to the ends. In order to increase the degree of dehydration of the unloaded product, the internal wall of each ladle is made of sheets installed in stages with clearances relative to each other. The advantages of the proposed device include an improvement in the degree of dehydration of the submerged product in the ladles and a reduction in the carry away of the heavy medium with the enrichment products.

  8. Innovations and czech retail business

    OpenAIRE

    Pecho, Maroš

    2014-01-01

    The aim of this thesis is to describe current trends in global retail, the current state of retail in Czech Republic and possible need of bringing innovation to the outburst of Millennials generation economic activity. Introduction is devoted to theoretical description of retail and its meaning. As part of the thesis, there is a significant part containing relations within the worldwide retail and also its current trends and development. Furthermore, part of the thesis is devoted to the devel...

  9. Organized Retailing of Horticultural Commodities

    OpenAIRE

    Sinha, Piyush Kumar; Thomas, Sujo

    2012-01-01

    Owing to rapid urbanization and changing consumption patterns, more and more retailers are trying to put their best efforts to discover new avenues of success when it comes to the sales of horticultural commodities. There are several Indian companies as well as foreign companies who have been focusing all their energies to succeed in the organized retail sector of Indian horticulture commodities. The Indian retail industry is worth $470 million and organized retail stands at $26 million which...

  10. Biologically Inspired Modular Neural Control for a Leg-Wheel Hybrid Robot

    DEFF Research Database (Denmark)

    Manoonpong, Poramate; Wörgötter, Florentin; Laksanacharoen, Pudit

    2014-01-01

    In this article we present modular neural control for a leg-wheel hybrid robot consisting of three legs with omnidirectional wheels. This neural control has four main modules having their functional origin in biological neural systems. A minimal recurrent control (MRC) module is for sensory signal...... processing and state memorization. Its outputs drive two front wheels while the rear wheel is controlled through a velocity regulating network (VRN) module. In parallel, a neural oscillator network module serves as a central pattern generator (CPG) controls leg movements for sidestepping. Stepping directions...... or they can serve as useful modules for other module-based neural control applications....

  11. Retail design : A new discipline

    NARCIS (Netherlands)

    Christiaans, H.H.C.M.; Almendra, R.A.

    2012-01-01

    This paper has the aim to address Retail Design as a new research and education discipline that because of its multidisciplinarity asks for a holistic approach. Although retailing as commerce is timeless, Retail Design is one of the most challenging new fields of design, embracing both design

  12. The State of Online Retailing.

    Science.gov (United States)

    Tamimi, Nabil; Rajan, Murli; Sebastianelli, Rose

    2003-01-01

    Benchmarks online retailing transactions against critical factors that impact online retailing. Findings suggest several areas that e-retailers should target for improvement, including the speed of home page loading, ability to translate into multiple languages, capabilities of search engines, security policies display, payment options, minimum…

  13. The worlds retail buyers construct

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    Previous research on retailer buying has assumed that the context of decision-making is more or less objectively given, or is at least kept constant for the purpose of study. This paper develops an alternative view in which retail buyers and retailers actively participate in the construction...

  14. Retailer brand architectures: Consumer perceptions of five Danish food retailers

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G.; Juhl, Hans Jørn

    In this paper we adapt the concept of brand architecture to food retailing. We present initial findings of a study investigating how consumer perceive and evaluate the brand architectures of five different Danish food retailers. Our findings show that consumers perceive differences in the brand...... architecture of food retailers and that it is an important factor in relation to evaluations of food retailers. We also find that consumers have considerable difficulties distinguishing between retailer brands and manufacturer brands, which has potentially disconcerting implications for branded food...

  15. Effective Retail Sales Techniques.

    Science.gov (United States)

    Canei, Robert A.

    The manual is a 12-hour program for adults who are working or preparing to work as retail salespeople. It can also be used as a summarization manual for high school students. The manual consists of five sessions which take the individual from the human aspect of sales to the related sales technique. The sessions are entitled: employee and customer…

  16. Optimizing retail assortments

    NARCIS (Netherlands)

    Bijmolt, T.H.A.; van Heerde, H.J.; Rooderkerk, R.P.

    2013-01-01

    Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKU sales can be cannibalized by other SKUs in the

  17. Optimizing Retail Assortments

    NARCIS (Netherlands)

    Rooderkerk, Robert P.; van Heerde, Harald J.; Bijmolt, Tammo H. A.

    2013-01-01

    Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number. of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKIT sales can be cannibalized by other SKUs in the

  18. Management Training in Retailing.

    Science.gov (United States)

    Veness, C. Rosina

    Intended for prospective members of the new Distributive Industrial Training Board in Great Britain, this training guide concentrates on managerial functions in retailing; the selection of trainees; the planning of in-company and external training programs; scheduling and continuity of training; roles of training personnel; and the use of various…

  19. Product mix retail strategies

    Directory of Open Access Journals (Sweden)

    Ristić Miloš

    2005-01-01

    Full Text Available The sales of appropriate merchandise is essential for performance of every retail enterprise. The way that products are displayed within retail sales object will be in so much important as the merchandise is considered a pad of the perceived image of that outlet. Thus, assorted products speak to their consumers as far as to what they [the consumers] can expect, and they signal off a number of marketing messages as well. Merchandising is the key element in attracting the consumers and in encouraging of repeated purchases. The question then could be: products or services?, yet the retailer's future will depend on his ability to develop the best sale offers. The selection of appropriate merchandise, and that would be the one [merchandise] that is in accordance with outlet's image, requires careful planning which, again, needs to be related with the direction the seller is following. Managing of the product assortments' dimensions emerges from the retailer's strategic planning, therefore, the decisions made on the inclusion of novel products as well as about deleting of the old stock are deemed (to be strategic.

  20. Modelling Retail Floorspace Productivity

    NARCIS (Netherlands)

    A.R. Thurik (Roy); P. Kooiman

    1986-01-01

    textabstractThis research note presents a "switching regime" model to investigate the impact of environmental factors on floorspace productivity of individual retail stores. The model includes independent supply and demand functions, which are incorporated within a sales maximizing framework. Unlike

  1. Optimizing retail assortments

    NARCIS (Netherlands)

    R.P. Rooderkerk (Robert); H.J. van Heerde (Harald); T.H.A. Bijmolt (Tammo)

    2013-01-01

    markdownabstract__Abstract__ Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKU sales can be

  2. Voluntary Wheel Running in Mice.

    Science.gov (United States)

    Goh, Jorming; Ladiges, Warren

    2015-12-02

    Voluntary wheel running in the mouse is used to assess physical performance and endurance and to model exercise training as a way to enhance health. Wheel running is a voluntary activity in contrast to other experimental exercise models in mice, which rely on aversive stimuli to force active movement. This protocol consists of allowing mice to run freely on the open surface of a slanted, plastic saucer-shaped wheel placed inside a standard mouse cage. Rotations are electronically transmitted to a USB hub so that frequency and rate of running can be captured via a software program for data storage and analysis for variable time periods. Mice are individually housed so that accurate recordings can be made for each animal. Factors such as mouse strain, gender, age, and individual motivation, which affect running activity, must be considered in the design of experiments using voluntary wheel running. Copyright © 2015 John Wiley & Sons, Inc.

  3. Wheels lining up for ATLAS

    CERN Multimedia

    2003-01-01

    On 30 October, the mechanics test assembly of the central barrel of the ATLAS tile hadronic calorimeter was completed in building 185. It is the second wheel for the Tilecal completely assembled this year.

  4. Grinding Wheel Profile

    Science.gov (United States)

    2004-01-01

    This graphic dubbed by engineers as the 'Grinding Wheel Profile' is the detective's tool used by the Opportunity team to help them understand one of the processes that formed the interior of a rock called 'McKittrick.' Scientists are looking for clues as to how layers, grains and minerals helped create this rock, and the engineers who built the rock abrasion tool (RAT) wanted to ensure that their instrument's handiwork did not get confused with natural processes.In the original microscopic image underlaying the graphics, engineers and scientists noticed 'layers' or 'scratches' on the spherical object nicknamed 'blueberry' in the lower right part of the image. The designers of the rock abrasion tool noticed that the arc length and width of the scratches were similar to the shape and size of the rock abrasion tool's grinding wheel, which is made out of a pad of diamond teeth.The scrapes on the bottom right blueberry appear to be caused by the fact that the berry got dislodged slightly and its surface was scraped with the grinding pad. In this image, the largest yellow circle is the overall diameter of the hole ground by the rock abrasion tool and the largest yellow rectangular shape is the area of the grinding wheel bit. The smaller yellow semi-circle is the path that the center of the grinding tool follows. The orange arrow arcing around the solid yellow circle (center of grinding tool) indicates the direction that the grinding tool spins around its own center at 3,000 revolutions per minute. The tool simultaneously spins in an orbit around the center of the hole, indicated by the larger orange arrow to the left.The grinding tool is 22 millimeters (0.9 inches) in length and the actual grinding surface, which consists of the diamond pad, is 1.5 millimeters (0.06 inches) in length, indicated by the two smaller rectangles. You can see that the smaller bottom rectangle fits exactly the width of the scrape marks.The grooves on the blueberry are also the same as the

  5. The emerging marijuana retail environment: Key lessons learned from tobacco and alcohol retail research.

    Science.gov (United States)

    Berg, Carla J; Henriksen, Lisa; Cavazos-Rehg, Patricia A; Haardoerfer, Regine; Freisthler, Bridget

    2018-06-01

    The emerging retail market for recreational marijuana use warrants research and surveillance as such markets are established in more US states. This research can be informed by the existing literature regarding tobacco and alcohol, which highlights the impact of spatial access to tobacco and alcohol retailers and exposure to tobacco and alcohol marketing on smoking and drinking among youth and young adults. Prior research indicates that tobacco and alcohol retailers, as well as medical marijuana dispensaries, are disproportionately located in neighborhoods characterized by socioeconomic disadvantage and by higher proportions of racial/ethnic minorities and young adults. Moreover, retail marketing or point-of-sale practices may differentially target subpopulations and differ by neighborhood demography and local policy. This literature and the methods employed for studying the tobacco and alcohol market could inform research on the retail environment for marijuana, as current gaps exist. In particular, much of the existing literature involves cross-sectional research designs; longitudinal studies are needed. Moreover, standardized measures are needed for systematic monitoring of industry marketing practices and to conduct research examining neighborhood differences in exposure to retail marketing for marijuana and its contribution to use modality and frequency, alone and in combination with nicotine and alcohol. The use of standardized measures for tobacco and alcohol marketing have been critical to develop an evidence base from cross-sectional and longitudinal studies that document the impact of retail marketing on substance use by adolescents and adults. Similar research is needed to establish an evidence base to inform federal, state, and local regulations of marijuana. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Retailers test Ontario market

    International Nuclear Information System (INIS)

    Kishewitsch, S.

    2000-01-01

    In anticipation of the full opening of the Ontario electricity market in November 2000, some of the newly-licensed electricity retailers are reported to be ready to begin testing the market early, hoping that all the uncertainties that still exist about pricing will be worked out in time. Among those jumping in now is Direct Energy Marketing, a retailer which claims 800,000 households in Ontario as electricity supply customers, as well as a wholesale gas marketing business. Direct Energy began retail electrical marketing on April 3, 2000, starting cautiously with small commercial operations as the initial target. Greengrid Electric, another of the new marketers, planned to begin marketing in mid-April, offering 100 per cent renewable-sourced electricity. Provident Energy Management, one of the new marketers whose licence is still pending, hopes to begin direct marketing as soon as its licence is confirmed. Another marketer ready to go as soon its license is issued is the former Sault Ste. Marie Hydro, now reorganized as PUC Energies Inc. PUC has the advantage of having a firm contract with a NUG (non-utility generator), Great Lakes Power, signed while PUC was still a municipal electric utility. As far as the other potential marketers are concerned, caution overrides opportunity for the present. Principal concerns are uncertainty over the retail settlement code, the electronic business data transfer system, transmission and distribution tariffs, whether existing non-utility generator contracts will allow for supply to another party, and over how quickly Ontario Power Generation Inc's (successor to Ontario Hydro) market power will be ratcheted down. Many of the potential marketers feel that despite the Ontario government's desire to see more competition, the power mitigation agreement, as it now reads, leaves little room for the small retailer to compete

  7. Retailers test Ontario market

    Energy Technology Data Exchange (ETDEWEB)

    Kishewitsch, S.

    2000-04-01

    In anticipation of the full opening of the Ontario electricity market in November 2000, some of the newly-licensed electricity retailers are reported to be ready to begin testing the market early, hoping that all the uncertainties that still exist about pricing will be worked out in time. Among those jumping in now is Direct Energy Marketing, a retailer which claims 800,000 households in Ontario as electricity supply customers, as well as a wholesale gas marketing business. Direct Energy began retail electrical marketing on April 3, 2000, starting cautiously with small commercial operations as the initial target. Greengrid Electric, another of the new marketers, planned to begin marketing in mid-April, offering 100 per cent renewable-sourced electricity. Provident Energy Management, one of the new marketers whose licence is still pending, hopes to begin direct marketing as soon as its licence is confirmed. Another marketer ready to go as soon its license is issued is the former Sault Ste. Marie Hydro, now reorganized as PUC Energies Inc. PUC has the advantage of having a firm contract with a NUG (non-utility generator), Great Lakes Power, signed while PUC was still a municipal electric utility. As far as the other potential marketers are concerned, caution overrides opportunity for the present. Principal concerns are uncertainty over the retail settlement code, the electronic business data transfer system, transmission and distribution tariffs, whether existing non-utility generator contracts will allow for supply to another party, and over how quickly Ontario Power Generation Inc's (successor to Ontario Hydro) market power will be ratcheted down. Many of the potential marketers feel that despite the Ontario government's desire to see more competition, the power mitigation agreement, as it now reads, leaves little room for the small retailer to compete.

  8. Marketing Sustainable Retail Development

    Directory of Open Access Journals (Sweden)

    Dragan Ilić

    2013-06-01

    Full Text Available One of the primary benefits of sustainable retail over the long run has to be the marketing gain from having something other competitors do not: lower operating costs, a more socially responsible public profile, ease of gaining planning approval for new projects, better access to certain investment pools, higher rents (in the case of developers, ease of recruiting and retaining key people. Each of these benefits needs marketing and public relations support; each benefits from a clear and consistent corporate message that promotes sustainable retail. To date, there are very few retailers or developers who have championed sustainability long enough, consistently enough and with enough actual demonstration of changes in standard operations to gain the benefits of green marketing, but the very paucity of examples serves to underscore the point: the green marketing space is wide open for large retailers and developers. What would be the marketing steps that a company could take to benefit from its “sustainability focus?” The key to any marketing program is to differentiate a company’s actions from those of competitors and to do it along lines that its various stakeholders care about. This practice of differentiation is often expressed as “finding a difference that makes a difference, to someone who makes difference to you.” For retail developers, the first differentiator should be to attract more and better tenants to all of their centers, tenants who value lower operating costs and the developer’s program of sustainable development and corporate social responsibility.

  9. Informization Implementation for Chinese Retailers

    Institute of Scientific and Technical Information of China (English)

    ZHU Yan; LI Yan; QIAN Yu; CHEN Jianfeng; CHEN Jian

    2008-01-01

    Retailing is an important component of every country's economic system. The current status and developments in the informization of Chinese retail industry were investigated by using questionnaires and interviews to survey 139 retailers throughout China. The investigation shows that Chinese retailers are in the initial informization stage, and can be classified into different types with corresponding informization characteristics. In addition, the survey identified the key problems faced by retailers in the initial stage. Developments in the information technology field were analyzed to identify the key technologies that Chinese retailers should focus on during the informization process. The investigation also shows that the retailers have not arrived at a consensus about information technology adoption, and thus hesitate to use new information technologies, such as the radio frequency identification.

  10. Estimating the Backup Reaction Wheel Orientation Using Reaction Wheel Spin Rates Flight Telemetry from a Spacecraft

    Science.gov (United States)

    Rizvi, Farheen

    2013-01-01

    A report describes a model that estimates the orientation of the backup reaction wheel using the reaction wheel spin rates telemetry from a spacecraft. Attitude control via the reaction wheel assembly (RWA) onboard a spacecraft uses three reaction wheels (one wheel per axis) and a backup to accommodate any wheel degradation throughout the course of the mission. The spacecraft dynamics prediction depends upon the correct knowledge of the reaction wheel orientations. Thus, it is vital to determine the actual orientation of the reaction wheels such that the correct spacecraft dynamics can be predicted. The conservation of angular momentum is used to estimate the orientation of the backup reaction wheel from the prime and backup reaction wheel spin rates data. The method is applied in estimating the orientation of the backup wheel onboard the Cassini spacecraft. The flight telemetry from the March 2011 prime and backup RWA swap activity on Cassini is used to obtain the best estimate for the backup reaction wheel orientation.

  11. Unpackaged Cigarettes and Smokeless Tobacco: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    2010-10-28

    This podcast helps retailers understand new federal regulations surrounding the sale of unpackaged tobacco products. To comply with the law, retailers may not break open packages of cigarettes or smokeless tobacco to sell or distribute as single or smaller quantities.  Created: 10/28/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 10/28/2010.

  12. Don't Sell Tobacco to Minors: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    2010-07-08

    This podcast helps raise retailers awareness of the new federal tobacco regulations. Under the new regulations, retailers can not sell cigarettes or smokeless tobacco to anyone younger 18.  Created: 7/8/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 7/8/2010.

  13. Barriers in EU retail financial markets

    OpenAIRE

    Micuda, Dan

    2007-01-01

    Looking at the retail financial markets and identifing a number of ‘‘natural’’ and ‘‘policy induced’’ obstacles to free trade. We use the term ‘‘natural’’ barriers to refer to those arising as a result of different cultures or consumer preferences, while different state tax policies or regulations are classified as ‘‘policy induced’’ barriers.

  14. 29 CFR 1926.303 - Abrasive wheels and tools.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Abrasive wheels and tools. 1926.303 Section 1926.303 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... freely on the spindle and shall not be forced on. The spindle nut shall be tightened only enough to hold...

  15. Restructuring of LDCs and retail marketing by producers

    International Nuclear Information System (INIS)

    Heath, D.

    1998-01-01

    The restructuring of local distribution companies (LDCs) and retail marketing producers and the challenges facing market participants were discussed. In Canada, LDC operations are regulated by provincial utilities commissions. This presentation focused on Ontario because it has the largest and most active retail gas market in Canada where some significant LDC restructuring initiatives are taking place. The current state of retail gas pricing in Ontario was also reviewed. Consumers Gas or Union Gas are the two utilities that serve most of the 2.2 million natural gas customers in Ontario. Both utilities have fully integrated supply and marketing businesses which include the sale and delivery of natural gas, related products and services. Suncor's recent entry into the retail natural gas market has been successful. Suncor currently has the third largest number of retail customers in Ontario and a significant share of that market. LDCs will become delivery companies who focus on providing reliable and safe distribution of natural gas to all customers and will provide open access to all gas marketers on a non-discriminatory basis. This will result in more sophisticated marketing to retail customers, retail customer contracts will change to fixed term, fixed price agreements, and there will be strong brand identification. Additional opportunities will be created as a result of deregulation of the electricity industry

  16. Electricity marketing and retailing

    International Nuclear Information System (INIS)

    Phillips, E.

    2001-01-01

    This power point presentation outlined the values of wholesale and retail marketing of natural gas to offer choice to all Canadians. The initial wholesale market dealt with physical bilaterals, financial bilaterals and transmission rights, while the mature wholesale market deals with futures contracts, reserve markets, dispatchable loads, swaps, trades and emissions trading. Wholesale prices include debt reduction charges, transmission charges transformation charges, ancillary charges, and independent market operator (IMO) fees. Retail rates offered by local distribution companies (LDC) include distribution charges, adjustments to SSS, and distribution losses. The role of marketers is to provide consumers with what they want, which is annual fixed rates with aggregation and load profiling as well as billing and procurement services

  17. Electricity marketing and retailing

    International Nuclear Information System (INIS)

    Hanlon, C.

    2001-01-01

    ECNG Inc. is a full service provider of independent and objective energy advice and management services to industrial, commercial and institutional end-users of all forms of energy. ECNG manages 10 per cent of the Ontario gas market and expects a 10 per cent share of electricity (14 TWh). ECNG has a balanced portfolio with expertise in both petroleum and electricity sectors. The company has also dealt extensively with retailers, marketers, wholesalers and suppliers on issues regarding deregulation

  18. Geisinger's Retail Innovation Journey.

    Science.gov (United States)

    Prince, Denise B; Graf, Thomas

    2015-01-01

    In 2003, Geisinger Health System formed a new group, Geisinger Ventures (GV), to accelerate the growth of new lines of business that were extensions of the core mission of the organization. Careworks, the convenient care clinic line of business, began in early 2006 as one of the early components of the GV portfolio. Over the past nine years, Geisinger has tested several retail and walk-in models, including in-store clinics, separate retail sites, and models colocated with primary care practices and emergency departments. Each site and model presents different benefits and challenges with respect to patient care, marketing, staffing, and clinical integration. With the implementation of healthcare reform and a decision to participate in Medicaid'managed care, Geisinger's strategic need for convenient care options has intensified, and new models, including e-visits and telemedicine specialty consultations, are being actively explored. Geisinger's view is that healthcare is rapidly changing, being affected by demographic shifts, diagnostic and treatment options, payment changes, and communication technologies. Healthcare delivery must flex to adjust to these and other trends, and retail clinics are part of that response. Careful examination of the critical elements necessary for optimal care (including wellness, prevention, and management of chronic disease and severe multimorbid disease) and then matching those elements to the optimal mode and site of care will lead to a streamlined healthcare system. The historical--and still most prevalent--methodology of traditional office, emergency department, and inpatient care options are not ideal for all patients' care needs in the twenty-first century. A thoughtful, deliberate extension of those options will be necessary. Rather than simply adding a static retail or virtual offering, medical professionals should develop a process to continually assess patients, technology, payment, and disease changes so that they are

  19. Vliv reklamy na retail

    OpenAIRE

    Kučerová, Lenka

    2008-01-01

    The purpose of this thesis is the connection of two aspects: retail and advertising and to provide general overviews. To foreshadow expected changes in the consumer's behaviour and establish how important the role advertisement constitutes. Research is also focused on direct influence of advertisement on customers. This thesis is composed of both a theoretical and a practical part. The first two chapters of the theoretical part represent a description of basic information about advertising an...

  20. An analysis of strategic price setting in retail gasoline markets

    Science.gov (United States)

    Jaureguiberry, Florencia

    This dissertation studies price-setting behavior in the retail gasoline industry. The main questions addressed are: How important is a retail station's brand and proximity to competitors when retail stations set price? How do retailers adjust their pricing when they cater to consumers who are less aware of competing options or have less discretion over where they purchase gasoline? These questions are explored in two separate analyses using a unique datasets containing retail pricing behavior of stations in California and in 24 different metropolitan areas. The evidence suggests that brand and location generate local market power for gasoline stations. After controlling for market and station characteristics, the analysis finds a spread of 11 cents per gallon between the highest and the lowest priced retail gasoline brands. The analysis also indicates that when the nearest competitor is located over 2 miles away as opposed to next door, consumers will pay an additional 1 cent per gallon of gasoline. In order to quantify the significance of local market power, data for stations located near major airport rental car locations are utilized. The presumption here is that rental car users are less aware or less sensitive to fueling options near the rental car return location and are to some extent "captured consumers". Retailers located near rental car locations have incentives to adjust their pricing strategies to exploit this. The analysis of pricing near rental car locations indicates that retailers charge prices that are 4 cent per gallon higher than other stations in the same metropolitan area. This analysis is of interest to regulators who are concerned with issues of consolidation, market power, and pricing in the retail gasoline industry. This dissertation concludes with a discussion of the policy implications of the empirical analysis.

  1. Canada's directory of ethanol retailers

    International Nuclear Information System (INIS)

    1997-07-01

    This document is a directory listing all ethanol-blended gasoline retailers in Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia, and the Yukon. The listings include the name and address of the retailer by province from west to east. Appendices providing a list of bulk purchase facilities of ethanol-blended fuels was also included, as well as a list of ethanol-blended gasoline retailers

  2. Tobacco advertising in retail stores.

    Science.gov (United States)

    Cummings, K M; Sciandra, R; Lawrence, J

    1991-01-01

    Recent studies have described tobacco advertising in the print media, on billboards, and through sponsorship of cultural and sporting events. However, little attention has been given to another common and unavoidable source of tobacco advertising, that which is encountered in retail stores. In July 1987, we conducted a survey of 61 packaged goods retail stores in Buffalo, NY, to assess the prevalence and type of point-of-sale tobacco advertising. In addition, store owners or managers were surveyed to determine their store's policy regarding tobacco advertising, receipt of monetary incentives from distributors for displaying tobacco ads, and willingness to display antitobacco ads. Six types of stores were involved in the study: 10 supermarkets, 10 privately owned grocery stores, 9 chain convenience food stores that do not sell gasoline, 11 chain convenience food stores that sell gasoline, 11 chain pharmacies, and 10 private pharmacies. Two-thirds of the stores displayed tobacco posters, and 87 percent had promotional items advertising tobacco products, primarily cigarettes. Larger stores, and those that were privately owned, tended to display more posters and promotional items. Eighty percent of tobacco product displays were for cigarettes, 16 percent for smokeless tobacco products, and 4 percent for cigars and pipe tobacco. Convenience stores selling gasoline had the most separate tobacco product displays. Of tobacco product displays, 24 percent were located adjacent to candy and snack displays. Twenty-nine of the 61 store owners or managers indicated that their store had a policy regulating the display of tobacco ads and tobacco product displays.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1910192

  3. The retailing of health care.

    Science.gov (United States)

    Paul, T; Wong, J

    1984-01-01

    A number of striking parallels between recent developments in health care marketing and changes in the retailing industry exist. The authors have compared retailing paradigms to the area on health care marketing so strategists in hospitals and other health care institutions can gain insight from these parallels. Many of the same economic, demographic, technological and lifestyle forces may be at work in both the health care and retail markets. While the services or products offered in health care are radically different from those of conventional retail markets, the manner in which the products and services are positioned, priced or distributed is surprisingly similar.

  4. Percentage Retail Mark-Ups

    OpenAIRE

    Thomas von Ungern-Sternberg

    1999-01-01

    A common assumption in the literature on the double marginalization problem is that the retailer can set his mark-up only in the second stage of the game after the producer has moved. To the extent that the sequence of moves is designed to reflect the relative bargaining power of the two parties it is just as plausible to let the retailer move first. Furthermore, retailers frequently calculate their selling prices by adding a percentage mark-up to their wholesale prices. This allows a retaile...

  5. Two new wheels for ATLAS

    CERN Multimedia

    2002-01-01

    Juergen Zimmer (Max Planck Institute), Roy Langstaff (TRIUMF/Victoria) and Sergej Kakurin (JINR), in front of one of the completed wheels of the ATLAS Hadronic End Cap Calorimeter. A decade of careful preparation and construction by groups in three continents is nearing completion with the assembly of two of the four 4 m diameter wheels required for the ATLAS Hadronic End Cap Calorimeter. The first two wheels have successfully passed all their mechanical and electrical tests, and have been rotated on schedule into the vertical position required in the experiment. 'This is an important milestone in the completion of the ATLAS End Cap Calorimetry' explains Chris Oram, who heads the Hadronic End Cap Calorimeter group. Like most experiments at particle colliders, ATLAS consists of several layers of detectors in the form of a 'barrel' and two 'end caps'. The Hadronic Calorimeter layer, which measures the energies of particles such as protons and pions, uses two techniques. The barrel part (Tile Calorimeter) cons...

  6. Retailer adherence to Family Smoking Prevention and Tobacco Control Act, North Carolina, 2011.

    Science.gov (United States)

    Rose, Shyanika W; Myers, Allison E; D'Angelo, Heather; Ribisl, Kurt M

    2013-04-04

    The Family Smoking Prevention and Tobacco Control Act regulates the sales and marketing of tobacco products in the United States; poor adherence by tobacco retailers may reduce the effectiveness of the Act's provisions. The objectives of this study were 1) to assess whether and to which provisions retailers were adherent and 2) to examine differences in adherence by county, retailer neighborhood, and retailer characteristics. We conducted multivariate analysis of tobacco retailers' adherence to 12 point-of-sale provisions of the Tobacco Control Act in 3 North Carolina counties. We conducted observational audits of 324 retailers during 3 months in 2011 to assess adherence. We used logistic regression to assess associations between adherence to provisions and characteristics of each county, retailer neighborhood, and retailer. We found 15.7% of retailers did not adhere to at least 1 provision; 84.3% adhered to all provisions. The provisions most frequently violated were the ban on sales of cigarettes with modified-risk labels (eg, "light" cigarettes) (43 [13.3%] retailers nonadherent) and the ban on self-service for cigarettes and smokeless tobacco (6 [1.9%] retailers nonadherent). We found significant differences in rates of nonadherence by county and type of retailer. Pharmacies and drug stores were more than 3 times as likely as grocery stores to be nonadherent. Most tobacco retailers have implemented regulatory changes without enforcement by the US Food and Drug Administration. Monitoring rates of adherence by store type and locale (eg, county) may help retailers comply with point-of-sale provisions.

  7. A comparison of three policy approaches for tobacco retailer reduction.

    Science.gov (United States)

    Myers, Allison E; Hall, Marissa G; Isgett, Lisa F; Ribisl, Kurt M

    2015-05-01

    The Institute of Medicine recommends that public health agencies restrict the number and regulate the location of tobacco retailers as a means of reducing tobacco use. However, the best policy strategy for tobacco retailer reduction is unknown. The purpose of this study is to test the percent reduction in the number and density of tobacco retailers in North Carolina resulting from three policies: (1) prohibiting sales of tobacco products in pharmacies or stores with a pharmacy counter, (2) restricting sales of tobacco products within 1000 ft of schools, and (3) regulating to 500 ft the minimum allowable distance between tobacco outlets. This study uses data from two lists of tobacco retailers gathered in 2012, one at the statewide level, and another "gold standard" three-county list. Retailers near schools were identified using point and parcel boundaries in ArcMap. Python programming language generated a random lottery system to remove retailers within 500 ft of each other. Analyses were conducted in 2014. A minimum allowable distance policy had the single greatest impact and would reduce density by 22.1% at the state level, or 20.8% at the county level (range 16.6% to 27.9%). Both a pharmacy and near-schools ban together would reduce density by 29.3% at the state level, or 29.7% at the county level (range 26.3 to 35.6%). The implementation of policies restricting tobacco sales in pharmacies, near schools, and/or in close proximity to another tobacco retailer would substantially reduce the number and density of tobacco retail outlets. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Propulsion Wheel Motor for an Electric Vehicle

    Science.gov (United States)

    Figuered, Joshua M. (Inventor); Herrera, Eduardo (Inventor); Waligora, Thomas M. (Inventor); Bluethmann, William J. (Inventor); Farrell, Logan Christopher (Inventor); Lee, Chunhao J. (Inventor); Vitale, Robert L. (Inventor); Winn, Ross Briant (Inventor); Eggleston, IV, Raymond Edward (Inventor); Guo, Raymond (Inventor); hide

    2016-01-01

    A wheel assembly for an electric vehicle includes a wheel rim that is concentrically disposed about a central axis. A propulsion-braking module is disposed within an interior region of the wheel rim. The propulsion-braking module rotatably supports the wheel rim for rotation about the central axis. The propulsion-braking module includes a liquid cooled electric motor having a rotor rotatable about the central axis, and a stator disposed radially inside the rotor relative to the central axis. A motor-wheel interface hub is fixedly attached to the wheel rim, and is directly attached to the rotor for rotation with the rotor. The motor-wheel interface hub directly transmits torque from the electric motor to the wheel rim at a 1:1 ratio. The propulsion-braking module includes a drum brake system having an electric motor that rotates a cam device, which actuates the brake shoes.

  9. Analysis of power wheeling services

    Energy Technology Data Exchange (ETDEWEB)

    Tepel, R.C.; Jewell, W.; Johnson, R.; Maddigan, R.

    1986-11-01

    Purpose of this study is to examine existing wheeling arrangements to determine the terms of the agreements, to analyze the terms relative to regulatory goals, and finally, to suggest ways in which the arrangements can be modified to lead to outcomes more closely in line with the goals. The regulatory goals that are considered are: Does the arrangement meet the revenue requirement of the wheeling firm. Is efficient use promoted. Are the costs fairly apportioned. And, is the arrangement practical and feasible to implement.

  10. 49 CFR 229.73 - Wheel sets.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Wheel sets. 229.73 Section 229.73 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Suspension System § 229.73 Wheel sets. (a...) when applied or turned. (b) The maximum variation in the diameter between any two wheel sets in a three...

  11. Electricity marketing and retailing

    International Nuclear Information System (INIS)

    Kilby, M.

    2001-01-01

    Canadian Metering Services provides metrology expertise to power producers and has more than 40 years experience in the industry. The company is privately and nationally accredited in Canada and is an expert in data communications. This power point presentation focused on issues regarding prices and price stability. Graphs were included with the presentation which depicted the profiles of winners and losers in electricity marketing and retailing. The presentation also discussed the benefits of a market surveillance panel, AMV, and MDMA and how to go about choosing them. tabs., figs

  12. Electricity marketing and retailing

    Energy Technology Data Exchange (ETDEWEB)

    Kilby, M. [Canadian Meter Services, Toronto ON (Canada)

    2001-07-01

    Canadian Metering Services provides metrology expertise to power producers and has more than 40 years experience in the industry. The company is privately and nationally accredited in Canada and is an expert in data communications. This power point presentation focused on issues regarding prices and price stability. Graphs were included with the presentation which depicted the profiles of winners and losers in electricity marketing and retailing. The presentation also discussed the benefits of a market surveillance panel, AMV, and MDMA and how to go about choosing them. tabs., figs.

  13. Retail Shopping Lists

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  14. What is smart for retailing?

    NARCIS (Netherlands)

    Pantano, Eleonora; Timmermans, Harry

    2014-01-01

    While the last decade has seen increasing interest in the smart city phenomenon from both scholars and practitioners, little attention has been paid to what extent retailing might be considered as part of smart cities, with benefits for all the actors involved in the process. In fact, retailing is

  15. COMPLEX PROMOTIONSIN RETAIL

    Directory of Open Access Journals (Sweden)

    O. Yusupova

    2015-10-01

    Full Text Available Complex promotions used by retailers introduce to the consumers several rules that must be satisfied in order to get some benefits and usually refer to multiple products (e.g. “buy two, get one free”. Rules of complex promotions can be quite sophisticated and complicated themselves. Since diversity of complex promotions limited only by marketers’ imagination we can observe broad variety of promotions’ rules and representa¬tions of those rules in retailers’ commercials. Such diversification makes no good for fellow scientist who’s trying to sort all type of promotions into the neatly organized classification. Although we can simple add every single set of rules offered by retailers as a separate form of sales promotion it seems not to be the best way of dealing with such a problem. The better way is to realize that mechanisms underlying that variety of promotions are basically the same, namely changes in demand or quantity demanded. Those two concepts alone provide powerful insight into classification of complex promotions and allow us to comprehend the variety of promotions offered by marketers nowadays.

  16. 29 CFR 779.110 - Employees in retailing whose activities may bring them under the Act.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Employees in retailing whose activities may bring them under the Act. 779.110 Section 779.110 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR... Production of Goods for Commerce § 779.110 Employees in retailing whose activities may bring them under the...

  17. Recovery tread wheel pairs of machining

    Directory of Open Access Journals (Sweden)

    Igor IVANOV

    2013-01-01

    Full Text Available The basic methods of resurfacing wheels are determined and analised. It’sshown that for raising resource of used wheels and decreasing requirements of railwaytransport for new wheels it’s reasonable to use methods of recovering not only geometricparameters of rim, but also its mechanical properties. It’s marked that use of infeedprofile high-speed grinding (VPVSh enables to intensify significantly process ofmechanical treatment of wheel rim profile both when its resurfacing in service and whenmanufacturing new wheel.

  18. Influencia de la regulación regional en la eficiencia en el sector minorista (1999-2012 || Influence of regional regulation on efficiency in the retail sector in the period 1999-2012

    Directory of Open Access Journals (Sweden)

    Gutiérrez Carmona, Cristina

    2015-06-01

    Full Text Available El objetivo principal de este trabajo es la identificación de los factores explicativos de las diferencias de eficiencia en las empresas del sector minorista (CNAE-09 4711 en España, prestando especial atención a la regulación con el fin de vislumbrar la forma en que esta ha influido en el desempeño de las empresas a raíz de los cambios legislativos acaecidos en el periodo 1999-2012. Preliminarmente también se realiza una primera etapa de análisis donde se estudian los niveles y evolución de la eficiencia y productividad. Los resultados obtenidos muestran que la eficiencia técnica media del sector para todo el periodo de estudio se cifra en el 65,9%, de manera que las empresas que operan en este podrían haber obtenido el mismo nivel de output con un ahorro potencial del 34% de los inputs. La escala a la que operan las compañías, alejada de su ́optimo, se constituye como el principal causante de la ineficiencia técnica. Respecto a la productividad total de los factores, experimentó un crecimiento medio en todo el periodo del 0,3%. En cuanto a los factores determinantes de la eficiencia, la regulación y el tamaño presentan una relación positiva y estadísticamente significativa. Igualmente la localización también influye sobre la eficiencia, mientras que la edad no se configura como factor determinante de la misma. || The main objective of this study is the identification of the explanatory factors on the differences in efficiency in the retail sector enterprises (CNAE-09 4711 in Spain, paying particular attention to the regulation in order to clarify the way in which this regulation has influenced the performance of the companies because of the legislative changes occurred in the 1999-2012 period. Moreover, a preliminary analysis is carried out to study levels and evolution of efficiency and productivity. The results show that the average technical efficiency for this retail sector in the period under study is estimated at 65

  19. Western diet increases wheel running in mice selectively bred for high voluntary wheel running.

    Science.gov (United States)

    Meek, T H; Eisenmann, J C; Garland, T

    2010-06-01

    Mice from a long-term selective breeding experiment for high voluntary wheel running offer a unique model to examine the contributions of genetic and environmental factors in determining the aspects of behavior and metabolism relevant to body-weight regulation and obesity. Starting with generation 16 and continuing through to generation 52, mice from the four replicate high runner (HR) lines have run 2.5-3-fold more revolutions per day as compared with four non-selected control (C) lines, but the nature of this apparent selection limit is not understood. We hypothesized that it might involve the availability of dietary lipids. Wheel running, food consumption (Teklad Rodent Diet (W) 8604, 14% kJ from fat; or Harlan Teklad TD.88137 Western Diet (WD), 42% kJ from fat) and body mass were measured over 1-2-week intervals in 100 males for 2 months starting 3 days after weaning. WD was obesogenic for both HR and C, significantly increasing both body mass and retroperitoneal fat pad mass, the latter even when controlling statistically for wheel-running distance and caloric intake. The HR mice had significantly less fat than C mice, explainable statistically by their greater running distance. On adjusting for body mass, HR mice showed higher caloric intake than C mice, also explainable by their higher running. Accounting for body mass and running, WD initially caused increased caloric intake in both HR and C, but this effect was reversed during the last four weeks of the study. Western diet had little or no effect on wheel running in C mice, but increased revolutions per day by as much as 75% in HR mice, mainly through increased time spent running. The remarkable stimulation of wheel running by WD in HR mice may involve fuel usage during prolonged endurance exercise and/or direct behavioral effects on motivation. Their unique behavioral responses to WD may render HR mice an important model for understanding the control of voluntary activity levels.

  20. 76 FR 56094 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-09-12

    ... currency with retail customers, subject to the requirements enumerated in the OCC's retail forex rule. The... shall prescribe \\5\\ (a retail forex rule). A transaction described in section 2(c)(2)(B)(i)(I) includes... associations are depository institutions. See 12 U.S.C. 1813(c)(1). \\3\\ For purposes of the retail forex rules...

  1. Three omni-directional wheels control on a mobile robot

    OpenAIRE

    Ribeiro, António Fernando; Moutinho, Ivo; Silva, Pedro; Fraga, Carlos; Pereira, Nino

    2004-01-01

    Traditional two wheels differential drive normally used on mobile robots have manoeuvrability limitations and take time to sort out. Most teams use two driving wheels (with one or two cast wheels), four driving wheels and even three driving wheels. A three wheel drive with omni-directional wheel has been tried with success, and was implemented on fast moving autonomous mobile robots. This paper deals with the mathematical kinematics description of such mobile platform, it describes the advant...

  2. Food Retailers and Obesity.

    Science.gov (United States)

    Stanton, Rosemary A

    2015-03-01

    We live in an 'obesogenic environment' where we are constantly bombarded with choices that encourage us to move less and eat more. Many factors influence our dietary choices, including the expert marketers who advise manufacturers on ways to encourage the population to buy more, especially profitable, palatable 'ultra-processed' foods. Supermarkets themselves have become skilled in manipulating buying behaviour, using their layout and specific product placement as well as advertising to maximise purchases of particular foods. Increasingly, supermarkets push their own 'house' brands. Those marketing fast foods also use persuasive tactics to attract customers, especially children who they entice with non-food items such as promotional or collectable toys. There is no mystery to the increase in obesity: our energy intake from foods and drinks has increased over the same period that energy output has decreased. Obesity has a range of relevant factors, but there is little doubt that marketing from supermarkets and fast food retailers has played a role.

  3. Wheeling and Banking Strategies for Optimal Renewable Energy Deployment. International Experiences

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, Jenny [National Renewable Energy Lab. (NREL), Golden, CO (United States); Vora, Ravi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mathur, Shivani [National Renewable Energy Lab. (NREL), Golden, CO (United States); Madrigal, Paola [Energy Regulatory Commission (Mexico); Chatterjee, Sushanta K. [Central Electricity Regulatory Commission (India); Shah, Rakesh [SunEdison, Mumbai (India)

    2016-03-01

    This paper defines the principles of wheeling (i.e., transmission) tariffs and renewable energy (RE) banking provisions and their role in RE deployment in countries with plans for large-scale RE. It reviews experiences to date in the United States, Mexico, and India and discusses key policy and regulatory considerations for devising more effective wheeling and/or banking provisions for countries with ambitious RE deployment targets. The paper addresses the challenges of competing needs of stakeholders, especially those of RE generators, distribution utilities, and transmission network owners and operators. The importance of wheeling and banking and their effectiveness for financial viability of RE deployment is also explored. This paper aims to benefit policymakers and regulators as well as key renewable energy stakeholders. Key lessons for regulators include: creating long-term wheeling and banking policy certainty, considering incentivizing RE through discounted transmission access, and assessing the cost implications of such discounts, as well as expanding access to renewable energy customers.

  4. TENDENCIES OF INTERNATIONALIZATION IN RETAILING

    Directory of Open Access Journals (Sweden)

    Pop Nicolae Alexandru

    2008-05-01

    Full Text Available Manufacturing companies took advantage of internationalization as early as in the seventies and eighties of the last century, whereas retail companies have used these chances not before the last few years in order to improve access to resources, to increase sales and to extend activities to external markets. Once a retail company has decided to penetrate a foreign market they must be aware of the unfamiliar working of external environment that they cannot control. Even the world’s leading retailers make mistakes when approaching markets they do not understand properly.

  5. UK retail marketing survey 94

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This document draws together data on the United Kingdom (UK) petroleum market up to the end of 1993. Lists include suppliers of petrol to the UK market listed by brand name, a regional breakdown of petrol and derv outlets, UK outlets which retail derv. Average retail prices for motor spirit and derv per litre are given as are sites fitted with Vapour Recovery equipment. Other tables shown indicate various companies' share of the market in terms of the percentage of petrol sites, including supermarkets. The volumes of motor spirit and derv delivered to retail and commercial customers between 1984 and 1993 is also given. (UK)

  6. Retailer buying: A paradigmatic critique

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    The paradigmatic anchoring of research determines for the researcher the nature of reality, what can be known about it and how it can be known. Previous research on retail buying has been anchored in post-positivism. A number of shortcomings resulting from this anchoring are identified which, taken...... together, are interpreted to have let to neglecting the notion of meaning in existing research. It is argued that taking a constructivist perspective can help overcome the limitations of previous research and contribute to the development of an understanding of retailer buying as meaningful action.retailer...

  7. Reconsidering Community-based Retailing

    OpenAIRE

    Maughan, Rebecca; O'Driscoll, Aidan

    2012-01-01

    One of the areas with great potential for economic, social and environmental benefit is community-based retailing. The concept of community based retailing can incorporate a number of different tenets. We suggest that it is retailing that is based close to the community it serves, usually within the town or village centre rather than out-of-town locations, and which is composed of a diverse range of small and medium sized business that are often independently or co-operatively owned. These co...

  8. Tobacco Retail Outlets and Vulnerable Populations in Ontario, Canada

    Directory of Open Access Journals (Sweden)

    Michael O. Chaiton

    2013-12-01

    Full Text Available Interest has been increasing in regulating the location and number of tobacco vendors as part of a comprehensive tobacco control program. The objective of this paper is to examine the distribution of tobacco outlets in a large jurisdiction, to assess: (1 whether tobacco outlets are more likely to be located in vulnerable areas; and (2 what proportion of tobacco outlets are located close to schools. Retail locations across the Province of Ontario from Ministry of Health Promotion data were linked to 2006 Census data at the neighbourhood level. There was one tobacco retail outlet for every 1,000 people over age 15 in Ontario. Density of outlets varied by public health unit, and was associated with the number of smokers. Tobacco outlets were more likely to be located in areas that had high neighbourhood deprivation, in both rural and urban areas. Outlets were less likely to be located in areas with high immigrant populations in urban areas, with the reverse being true for rural areas. Overall, 65% of tobacco retailers were located within 500 m of a school. The sale of tobacco products is ubiquitous, however, neighbourhoods with lower socio-economic status are more likely to have easier availability of tobacco products and most retailers are located within walking distance of a school. The results suggest the importance of policies to regulate the location of tobacco retail outlets.

  9. 29 CFR 779.321 - Inapplicability of “retail concept” to some types of sales or services of an eligible establishment.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Inapplicability of âretail conceptâ to some types of sales... DIRECTLY RELATED TO REGULATIONS THE FAIR LABOR STANDARDS ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES... Retailâ § 779.321 Inapplicability of “retail concept” to some types of sales or services of an eligible...

  10. Space shuttle wheels and brakes

    Science.gov (United States)

    Carsley, R. B.

    1985-01-01

    The Space Shuttle Orbiter wheels were subjected to a combination of tests which are different than any previously conducted in the aerospace industry. The major testing difference is the computer generated dynamic landing profiles used during the certification process which subjected the wheels and tires to simulated landing loading conditions. The orbiter brakes use a unique combination of carbon composite linings and beryllium heat sink to minimize weight. The development of a new lining retention method was necessary in order to withstand the high temperature generated during the braking roll. As with many programs, the volume into which this hardware had to fit was established early in the program, with no provisions made for growth to offset the continuously increasing predicted orbiter landing weight.

  11. Real-time Non-linear Target Tracking Control of Wheeled Mobile Robots

    Institute of Scientific and Technical Information of China (English)

    YU Wenyong

    2006-01-01

    A control strategy for real-time target tracking for wheeled mobile robots is presented. Using a modified Kalman filter for environment perception, a novel tracking control law derived from Lyapunov stability theory is introduced. Tuning of linear velocity and angular velocity with mechanical constraints is applied. The proposed control system can simultaneously solve the target trajectory prediction, real-time tracking, and posture regulation problems of a wheeled mobile robot. Experimental results illustrate the effectiveness of the proposed tracking control laws.

  12. CHALLENGES AND OPPORTUNITIES OF CATALOGUE RETAILING

    OpenAIRE

    Heri Bezic; Katija Vojvodic; Zrinka Gjanovic

    2012-01-01

    Today`s retail environment is characterised by new, store and non-store, retailing formats, a wide range of new products, the use of new information and communication technologies and, consequently, the changing customer behaviour. Catalogue retailing is a non-store retail format that has a long history in North America and Europe. Previous research revealed that the primary shopping motives related to catalogue retailing were convenience oriented. Other motives included recreational orientat...

  13. « Retail Brand Equity: A PLS Approach

    OpenAIRE

    Magali Jara

    2009-01-01

    In large retail stores, France is characterized by market saturation and even a decline of several retail concepts such as variety stores, or even supermarkets and hypermarkets (Cliquet, 2000). This situation leads to a fierce competition and raises questions which affect marketing strategies of French retail companies. Given the legal context, the French retailers can increase sales through retail brands which appear to be henceforth among the most effective marketing tools. Indeed, product ...

  14. Optimal Retail Price Model for Partial Consignment to Multiple Retailers

    Directory of Open Access Journals (Sweden)

    Po-Yu Chen

    2017-01-01

    Full Text Available This paper investigates the product pricing decision-making problem under a consignment stock policy in a two-level supply chain composed of one supplier and multiple retailers. The effects of the supplier’s wholesale prices and its partial inventory cost absorption of the retail prices of retailers with different market shares are investigated. In the partial product consignment model this paper proposes, the seller and the retailers each absorb part of the inventory costs. This model also provides general solutions for the complete product consignment and the traditional policy that adopts no product consignment. In other words, both the complete consignment and nonconsignment models are extensions of the proposed model (i.e., special cases. Research results indicated that the optimal retail price must be between 1/2 (50% and 2/3 (66.67% times the upper limit of the gross profit. This study also explored the results and influence of parameter variations on optimal retail price in the model.

  15. 76 FR 33065 - Adaptation of Regulations to Incorporate Swaps

    Science.gov (United States)

    2011-06-07

    ... regulation 1.3 as well. The Commission also proposes adding the term ``retail forex customer'' to regulation... appears in regulation 5.1(k).\\21\\ \\21\\ 17 CFR 5.1(k) currently defines ``retail forex customer'' as ``a...,'' ``retail forex exchange transactions,'' and ``commodity option transactions'' with the term ``commodity...

  16. 77 FR 66287 - Adaptation of Regulations To Incorporate Swaps

    Science.gov (United States)

    2012-11-02

    ... the term ``retail forex customer'' in regulation 1.3 because it appears in several regulations in part... receive any comments to the Proposal's addition of a definition of ``retail forex customer'' to regulation 1.3. \\26\\ 17 CFR 5.1(k) currently defines ``retail forex customer'' as ``a person, other than an...

  17. How Retailers Handle Complaint Management

    DEFF Research Database (Denmark)

    Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

    2009-01-01

    This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained as to the......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived...

  18. Prerequisites for Setting Up Management System in Municipal Retail Trade

    Science.gov (United States)

    Suraeva, Maria O.; Grigoryants, Igor A.; Karpova, Galina A.; Khoreva, Lyubov V.; Schreyer, Alexander V.; Sirotkin, Victor A.

    2016-01-01

    The relevance of the research problem Urban district, management, trade, sales network is determined by the number of complex problems that exist in present Samara municipal retail trade system, which is manifested in the lack of regulation, a glut of sales area, and poorly developed infrastructure. The purpose of this article is to form a…

  19. Tobacco Control Act: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    2010-06-22

    This podcast helps raise retailers awareness of the new federal tobacco regulations.  Created: 6/22/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 6/22/2010.

  20. National steel tries wheeling

    International Nuclear Information System (INIS)

    Dudak, J.R.

    1992-01-01

    In 1989, National Steel felt the need to take the next step to make its Detroit-based division, Great Lakes Steel, more competitive in the world flat-rolled steel market. In 1988, Great Lakes Steel started flowing natural gas through the first fully litigated bypass (Competitive Sourcing Option) of a local distribution company. In 1989, the second connection with the new supply route for gas transportation, Panhandle Eastern had started flowing and the LDC, Michigan Consolidated Gas Co. (MichCon) had pulled out their piping previously serving the plants. Since we had been able to structure a fully reliable supply route, storage and balancing program for gas in the face of such strong opposition by the LDC, the author felt it was time to attack the next singularly sourced major commodity, electricity. Electricity, at this major integrated steel plant, represented approximately 7% of plant cost yearly. Yet being monopolized, Great Lakes Division (GLD) could not multiple source this commodity like it does with its other 93% of costs, except for labor (25% of the 93%). Multiple sourcing is done to bring competitive pressure to suppliers and to diversify supplies and protect plant operation in the event of failure by one supplier. This paper describes National Steel's strategy to reduce the cost of power, at the minimum of capital costs, the most expedient way possible, that does not sacrifice any major long-term potential cost improvements. The results show that competitively priced power is available across the mid-west, at prices well below many state regulated electric utilities, for at least 5 to 15 years, but with major obstacles in obtaining transmission access

  1. Tobacco advertising in retail stores.

    OpenAIRE

    Cummings, K M; Sciandra, R; Lawrence, J

    1991-01-01

    Recent studies have described tobacco advertising in the print media, on billboards, and through sponsorship of cultural and sporting events. However, little attention has been given to another common and unavoidable source of tobacco advertising, that which is encountered in retail stores. In July 1987, we conducted a survey of 61 packaged goods retail stores in Buffalo, NY, to assess the prevalence and type of point-of-sale tobacco advertising. In addition, store owners or managers were sur...

  2. Retail Visual Assistant Digital Artefact

    OpenAIRE

    Knott, Neville

    2013-01-01

    Window display, store layout and visual merchandising are defined as the ability to attract and sell to the consumer silently. One of the biggest challenges facing small retail businesses in towns and villages around the globe is how to compete against large multinationals in the visual layout and presentation of their merchandise and shops. One of the key advantages that large retail units have over small ones is professionally merchandised stock incorporated into a strategic spatial layout....

  3. Retail payments and economic growth

    OpenAIRE

    Hasan, Iftekhar; De Renzis, Tania; Schmiedel , Heiko

    2012-01-01

    This paper examines the fundamental relationship between retail payments and overall economic growth. Using data from across 27 European markets over the period 1995–2009, the results confirm that migration to efficient electronic retail payments stimulates overall economic growth, consumption and trade. Among different payment instruments, this relationship is strongest for card payments, followed by credit transfers and direct debits. Cheque payments are found to have a relatively low macro...

  4. Reaction wheels for kinetic energy storage

    Science.gov (United States)

    Studer, P. A.

    1984-11-01

    In contrast to all existing reaction wheel implementations, an order of magnitude increase in speed can be obtained efficiently if power to the actuators can be recovered. This allows a combined attitude control-energy storage system to be developed with structure mounted reaction wheels. The feasibility of combining reaction wheels with energy storage wwheels is demonstrated. The power required for control torques is a function of wheel speed but this energy is not dissipated; it is stored in the wheel. The I(2)R loss resulting from a given torque is shown to be constant, independent of the design speed of the motor. What remains, in order to efficiently use high speed wheels (essential for energy storage) for control purposes, is to reduce rotational losses to acceptable levels. Progress was made in permanent magnet motor design for high speed operation. Variable field motors offer more control flexibility and efficiency over a broader speed range.

  5. Customer loads of two-wheeled vehicles

    Science.gov (United States)

    Gorges, C.; Öztürk, K.; Liebich, R.

    2017-12-01

    Customer usage profiles are the most unknown influences in vehicle design targets and they play an important role in durability analysis. This publication presents a customer load acquisition system for two-wheeled vehicles that utilises the vehicle's onboard signals. A road slope estimator was developed to reveal the unknown slope resistance force with the help of a linear Kalman filter. Furthermore, an automated mass estimator was developed to consider the correct vehicle loading. The mass estimation is performed by an extended Kalman filter. Finally, a model-based wheel force calculation was derived, which is based on the superposition of forces calculated from measured onboard signals. The calculated wheel forces were validated by measurements with wheel-load transducers through the comparison of rainflow matrices. The calculated wheel forces correspond with the measured wheel forces in terms of both quality and quantity. The proposed methods can be used to gather field data for improved vehicle design loads.

  6. Stability Simulation of a Vehicle with Wheel Active Steering

    Directory of Open Access Journals (Sweden)

    Brabec Pavel

    2016-01-01

    Full Text Available This paper deals with the possibility of increasing the vehicle driving stability at a higher speed. One of the ways how to achieve higher stability is using the 4WS system. Mathematical description of vehicle general movement is a very complex task. For simulation, models which are aptly simplified are used. For the first approach, so-called single-truck vehicle model (often linear is usually used. For the simulation, we have chosen to extend the model into a two-truck one, which includes the possibility to input more vehicle parameters. Considering the 4WS system, it is possible to use a number of potential regulations. In our simulation model, the regulation system with compound coupling was used. This type of regulation turns the rear wheels depending on the input parameters of the system (steering angle of the front wheels and depending on the output moving quantities of the vehicle, most frequently the yaw rate. Criterion for compensation of lateral deflection centre of gravity angle is its zero value, or more precisely the zero value of its first-order derivative. Parameters and set-up of the simulation model were done in conjunction with the dSAPACE software. Reference performances of the vehicle simulation model were made through the defined manoeuvres. But the simulation results indicate that the rear-wheels steering can have a positive effect on the vehicle movement stability, especially when changing the driving direction at high speed.

  7. Using wheel availability to shape running behavior of the rat towards improved behavioral and neurobiological outcomes.

    Science.gov (United States)

    Basso, Julia C; Morrell, Joan I

    2017-10-01

    Though voluntary wheel running (VWR) has been used extensively to induce changes in both behavior and biology, little attention has been given to the way in which different variables influence VWR. This lack of understanding has led to an inability to utilize this behavior to its full potential, possibly blunting its effects on the endpoints of interest. We tested how running experience, sex, gonadal hormones, and wheel apparatus influence VWR in a range of wheel access "doses". VWR increases over several weeks, with females eventually running 1.5 times farther and faster than males. Limiting wheel access can be used as a tool to motivate subjects to run but restricts maximal running speeds attained by the rodents. Additionally, circulating gonadal hormones regulate wheel running behavior, but are not the sole basis of sex differences in running. Limitations from previous studies include the predominate use of males, emphasis on distance run, variable amounts of wheel availability, variable light-dark cycles, and possible food and/or water deprivation. We designed a comprehensive set of experiments to address these inconsistencies, providing data regarding the "microfeatures" of running, including distance run, time spent running, running rate, bouting behavior, and daily running patterns. By systematically altering wheel access, VWR behavior can be finely tuned - a feature that we hypothesize is due to its positive incentive salience. We demonstrate how to maximize VWR, which will allow investigators to optimize exercise-induced changes in their behavioral and/or biological endpoints of interest. Published by Elsevier B.V.

  8. Food retailing and food service.

    Science.gov (United States)

    Capps, Oral; Park, John L

    2003-07-01

    The food retailing and food service sector is not only an important component of the food marketing channel but is also vital to the United States economy, accounting for more than 7% of the United States gross domestic product in 2001. The business of food retailing and food service is undergoing salient change. The authors argue that the singular force driving this change is the consumer. To understand the linkages in the food marketing channel, this article provides information on the farm-to-retail price spread and the economic forces that influence their magnitude. Examples are given of farm-to-retail price spreads for red meat and dairy industries. In addition, the economics behind the provision of retail services and the growth of the food service industry are discussed. Further, the authors demonstrate that the structure of the food market channel is consumer driven, and present three characteristics of convenience (preparation, delivery, and service) and identify four food distribution channels in terms of convenience (complete convenience, traditional food service, consumer direct, and traditional retail).

  9. Four-Wheel Vehicle Suspension System

    Science.gov (United States)

    Bickler, Donald B.

    1990-01-01

    Four-wheel suspension system uses simple system of levers with no compliant components to provide three-point suspension of chassis of vehicle while maintaining four-point contact with uneven terrain. Provides stability against tipping of four-point rectangular base, without rocking contact to which rigid four-wheel frame susceptible. Similar to six-wheel suspension system described in "Articulated Suspension Without Springs" (NPO-17354).

  10. Face-to-face Tobacco Sales: What Retailers Need to Know PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    PSA to help raise retailers' awareness of the new federal tobacco regulations related to the sale of cigarettes and smokeless tobacco products to people under 18 and the requirement to sell products face-to-face.

  11. Origami Wheel Transformer: A Variable-Diameter Wheel Drive Robot Using an Origami Structure.

    Science.gov (United States)

    Lee, Dae-Young; Kim, Sa-Reum; Kim, Ji-Suk; Park, Jae-Jun; Cho, Kyu-Jin

    2017-06-01

    A wheel drive mechanism is simple, stable, and efficient, but its mobility in unstructured terrain is seriously limited. Using a deformable wheel is one of the ways to increase the mobility of a wheel drive robot. By changing the radius of its wheels, the robot becomes able to pass over not only high steps but also narrow gaps. In this article, we propose a novel design for a variable-diameter wheel using an origami-based soft robotics design approach. By simply folding a patterned sheet into a wheel shape, a variable-diameter wheel was built without requiring lots of mechanical parts and a complex assembly process. The wheel's diameter can change from 30 to 68 mm, and it is light in weight at about 9.7 g. Although composed of soft materials (fabrics and films), the wheel can bear more than 400 times its weight. The robot was able to change the wheel's radius in response to terrain conditions, allowing it to pass over a 50-mm gap when the wheel is shrunk and a 50-mm step when the wheel is enlarged.

  12. Retailing residential electricity : A concept that makes sense?

    International Nuclear Information System (INIS)

    MacDonald, C.

    2003-07-01

    A heated debate centres around the deregulation of the electricity industry and the retailing of residential electricity. An assessment of the current situation in the industry was provided in this paper to provide a basis for discussion. The experience gained both in Alberta and Texas in residential retail was examined. The main issue of concern is whether residential customers will benefit from deregulation of the electricity sector. The Retail Energy Deregulation (RED) Index provides a benchmark for those jurisdictions considering the residential options. Deregulation has not led to significant benefits to residential customers in most jurisdictions. The electricity industry will always require a central dispatch/market process that will have to designed, governed, regulated, modified regularly. The benefits to residential consumers are not expected for a very long time. Standard market design is an issue that will require attention. refs., 7 figs

  13. ETHICAL EVALUATIONS OF RETAILERS: AN EMPIRICAL STUDY ON FOOD AND CLOTHING RETAILERS IN KAYSERİ

    Directory of Open Access Journals (Sweden)

    Ramazan Kurtoğlu

    2016-04-01

    Full Text Available Rapid developments in retailing sector bring about some ethical problems. Retailing is a faceto-face marketing activity by its nature. Thus, ethical problems in retailing directly affect consumers and consumer reactions turn directly to retailers. Therefore, defining and solving the ethical problems in retailing is an important issue for retailers. The main purpose of this study is to identify the food and clothing retailers’ perspective about ethical purchase decision making process and their evaluations on this subject. Beside this, identifying the differences of these evaluations in terms of the demographic characteristics of retailers is another objective of this study. Findings show that retailers generally approve ethical behaviors and disapprove unethical behaviors. In addition, evaluations of retailers differ in terms of some demographic characteristics. Results of the study also show that retailers are sensitive about unethical actions and behaviors and they believe that all the retailers must act according to ethical principles.

  14. Greasing the Wheels of Trade

    OpenAIRE

    Hendrik P. van Dalen; Aico P. van Vuuren

    2003-01-01

    This discussion paper resulted in a publication in 'De Economist' , 2005, 153(2), 139-165. How much does a nation spend on resources to 'grease the wheels of trade'? To examine this question the Dutch economy is used as an exemplary case as the Netherlands are known as a nation of traders. This image was derived in the seventeenth century from successes in long distance trade, shipping and financial innovations. Despite its historical background in trading the potential to 'truck and barter' ...

  15. Creating employees' motivational paths in the retail trade

    OpenAIRE

    Kantanen Teuvo; Julkunen Saara; Hiltunen Esa; Nickell David

    2017-01-01

    This study examines the manifestation of intrinsic motivation by exploring the sources of intrinsic and extrinsic motivation among employees of a retail hypermarket. The research uses narrative and ethnographical analysis from 24 interviews. Two unique dimensions were created for motivational power—source and growth process—for a new typology of work motivation. The typology consists of four processes: intrinsic regulation, intrinsic valuation, extrinsic valuation, and extrinsic regulation. T...

  16. French retail electricity and gas markets functioning - 2011-2012 report

    International Nuclear Information System (INIS)

    2013-01-01

    French retail electricity and gas markets are progressively opening to competition. These changes reflect the development of more competitive market offers with respect to regulated sales tariffs in both energies, as well as a better knowledge of these markets by end-users. In this context of retail markets development, the Energy Regulatory Commission (CRE) pays attention to the monitoring of actors behaviour, in particular in the domain of price and offer transparency. This report presents, first, the situation of the French retail electricity and gas markets by December 31, 2011. Then, an economic analysis of the supplies on retail market is made. Next, a qualitative analysis of transparency and operation on retail markets is presented. Finally, CRE makes some proposals for the improvement of the transparency and operation of these markets

  17. Meals on Wheels Association of America

    Science.gov (United States)

    ... Meals About Meals on Wheels Get Started The Issue The Problem & Our Solution Meals on Wheels Health Facts & Resources Senior Facts Map State Fact Sheets Research More Than a Meal Pilot Research Study Medicare Claims Analyses Policy Myths Hunger in Older Adults Take Action Volunteer Advocate #SAVELUNCH ...

  18. A Full Disturbance Model for Reaction Wheels

    NARCIS (Netherlands)

    Le, M.P.; Ellenbroek, Marcellinus Hermannus Maria; Seiler, R; van Put, P.; Cottaar, E.J.E.

    2014-01-01

    Reaction wheels are rotating devices used for the attitude control of spacecraft. However, reaction wheels also generate undesired disturbances in the form of vibrations, which may have an adverse effect on the pointing accuracy and stability of spacecraft (optical) payloads. A disturbance model for

  19. Assessment of a Boat Fractured Steering Wheel

    Directory of Open Access Journals (Sweden)

    Vukelic Goran

    2016-09-01

    Full Text Available During regular use of the steering wheel mounted on a boat, two cracks emanating from a fastener hole were noticed which, consequently, caused final fracture of the wheel. To determine the behavior of a boat steering wheel with cracks present, assessment of a fractured wheel was performed. Torque moments of the fasteners were measured prior to removing the steering wheel from the boat. Visual and dye penetrant inspection followed along with the material detection. Besides using experimental procedures, assessment of the fractured wheel was performed using finite element analysis, i.e. stress intensity factor values were numerically determined. Variation of stress intensity factor with crack length is presented. Possible causes of crack occurrence are given and they include excessive values of fastener torque moments coupled with fretting between fastener and fastener hole that was poorly machined. Results obtained by this assessment can be taken for predicting fracture behavior of a cracked steering wheel and as a reference in the design, mounting and exploitation process of steering wheels improving that way their safety in transportation environment.

  20. Riding the Ferris Wheel: A Sinusoidal Model

    Science.gov (United States)

    Mittag, Kathleen Cage; Taylor, Sharon E.

    2011-01-01

    When thinking of models for sinusoidal waves, examples such as tides of the ocean, daily temperatures for one year in your town, light and sound waves, and certain types of motion are used. Many textbooks [1, p. 222] also present a "Ferris wheel description problem" for students to work. This activity takes the Ferris wheel problem out of the…

  1. The Ferris Wheel and Justifications of Curvature

    Science.gov (United States)

    Stevens, Irma E.; Moore, Kevin C.

    2016-01-01

    This report discusses the results of semi-structured clinical interviews with ten prospective secondary mathematics teachers who were provided with dynamic images of Ferris wheels. We asked the students to graph the relationship between the distance a rider traveled around the Ferris wheel and the height of the rider from the ground. We focus on…

  2. Dynamic and Acoustic Characterisation of Automotive Wheels

    Directory of Open Access Journals (Sweden)

    Francesca Curà

    2004-01-01

    Full Text Available The subject of this paper is the dynamic and acoustic characterisation of an automotive wheel. In particular, an experimental research activity previously performed by the authors about the dynamic behaviour of automotive wheels has been extended to the acoustic field.

  3. Response to DOE's call for comments on its discussion paper on wholesale and retail market design

    International Nuclear Information System (INIS)

    Pound, T.

    2005-01-01

    The options available to the Government of Alberta concerning retail electricity policy were reviewed by the Office of the Utilities Consumer Advocate. The Council claims that the deregulation of Alberta's electricity market has been a success because competition has added new generation and removed inefficient generation from service. However, the Council is concerned that the transition to competitive retail electricity market can impose additional costs and risks on small consumers. Therefore, it proposes that electricity be bought on a central basis for small consumers using a suitable mix of 3 to 5 year hedges; that competitive and regulated retailers be given full access to a centrally purchased hedge supply; that regulated retailers be offered a small customer service margin price incentive per kWh over the hedged energy rate; and that the regulated rate option be reviewed in 4 years. 1 fig

  4. Effect of short-term prefeeding and body weight on wheel running and responding reinforced by the opportunity to run in a wheel.

    Science.gov (United States)

    Belke, Terry W; Pierce, W David; Jensen, K

    2004-07-30

    A biobehavioural analysis of activity anorexia suggests that the motivation for physical activity is regulated by food supply and body weight. In the present experiment, food allocation was varied within subjects by prefeeding food-deprived rats 0, 5, 10 and 15 g of food before sessions of lever pressing for wheel-running reinforcement. The experiment assessed the effects of prefeeding on rates of wheel running, lever pressing, and postreinforcement pausing. Results showed that prefeeding animals 5 g of food had no effect. Prefeeding 10 g of food reduced lever pressing for wheel running and rates of wheel running without a significant change in body weight; the effect was, however, transitory. Prefeeding 15 g of food increased the animals' body weights, resulting in a sustained decrease of wheel running and lever pressing, and an increase in postreinforcement pausing. Overall the results indicate that the motivation for physical activity is regulated by changes in local food supply, but is sustained only when there is a concomitant change in body weight.

  5. College-Level Education in Retailing: A Comparison of Perceptions of Retail Employment Executives and Retail Educators.

    Science.gov (United States)

    Coates, Sue Stringer

    The tremendous changes in methods of operation experienced in the retailing field in recent years, have brought about changes in the nature and extent of formal education required of potential retail executives. The primary purpose of this study was to ascertain the relative value of various elements of college retailing programs in the…

  6. Retailing: Careers in the Department Store Industry.

    Science.gov (United States)

    Martin, Gail M.

    1982-01-01

    The retailing industry is overviewed and executive training programs are detailed. Jobs in retailing are described: merchandising, department manager, assistant buyer, buyer, merchandise manager, and store manager. Also discussed are operations, financial control, and personnel management. (CT)

  7. Retail Market Structure Development in Central Europe

    Directory of Open Access Journals (Sweden)

    Martin Machek

    2012-12-01

    Full Text Available This article is analyzing the trends and development in the retailing sector in Central Europe, namely in the Czech Republic, Hungary, Poland and Slovakia. These markets serve about 63 million inhabitants. The retail industry in Central Europe has changed dramatically in the last two decades, and has become a model for successful transformation of emerging markets. The retail market is highly concentrated and dominated by Western European retail chains. International retail chains are using all formats of modern distribution. This article is focusing on the development of hypermarkets, supermarkets and discount stores. Due to the international retail chains, Central European countries benefit from a dense network of modern shopping places; the intense competition of highly productive retailers contributes to the lower level of inflation rate because of the so-called Wal-Mart Effect. The constant pressure on prices influences the marketing strategies of both retailers and suppliers.

  8. Retail applications of signature verification

    Science.gov (United States)

    Zimmerman, Thomas G.; Russell, Gregory F.; Heilper, Andre; Smith, Barton A.; Hu, Jianying; Markman, Dmitry; Graham, Jon E.; Drews, Clemens

    2004-08-01

    The dramatic rise in identity theft, the ever pressing need to provide convenience in checkout services to attract and retain loyal customers, and the growing use of multi-function signature captures devices in the retail sector provides favorable conditions for the deployment of dynamic signature verification (DSV) in retail settings. We report on the development of a DSV system to meet the needs of the retail sector. We currently have a database of approximately 10,000 signatures collected from 600 subjects and forgers. Previous work at IBM on DSV has been merged and extended to achieve robust performance on pen position data available from commercial point of sale hardware, achieving equal error rates on skilled forgeries and authentic signatures of 1.5% to 4%.

  9. Biaxial wheel/hub test facility. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, G.; Grubisic, V. [eds.

    2000-07-01

    The 4{sup th} meeting aims to exchange the experience and knowledge of engineers during several presentations and discussions about new developments required for a reliable, time and cost reducing validation of the wheel/hub assembly. Tremendous development of the wheel performance, described by the ratio of the rated load (kg) versus the wheel weight (kg) had taken place during the last 5000 years. Starting from the ratio of 3 for wooden 2-piece-disc-wheels in Mesopotamia it needed nearly 1000 years to increase the ratio to approx 5 at light-weight spoke wheels for fighting carriages, found in the grave of king Tutenchamon in Egypt. Modern light alloy wheels of commercial vehicles reach values up to 160 kg/kg. Additionally the comlex design of the modern systems for cars and commercial vehicles comprising wheel, brake, hub, bearing, spindle and hub carrier, including different materials and their treatment, fasteners, press-fits, require an appropriate testing procedure. The variable loading conditions, caused by operational wheel forces, brake and torque moments including heating, may result in changing tolerances and press-fits during operation and consequently in different damage mechanisms. This can be simulated in the Biaxial Wheel Test Machine, whereby corresponding load programs are necessary. An overview about all biaxial test machines in usage at the end of 1999 is shown in the introduction. The total number is 17 for cars, 7 for commercial vehicles and 1 for trains. The six presentations of this meeting were consequently concentrated on: (a) recommendations for a standardization of load programs of the German Wheel Committee, (b) the simulation of brake and torque events and (c) the possibility for a numerical stress analyses and fatigue life assessment. (orig./AKF)

  10. THE AGGREGATE IMPACT OF ONLINE RETAIL

    OpenAIRE

    Allen Tran

    2014-01-01

    To study the impact of online retail on aggregate welfare, I use a spatial model to calculate a new measure of store level retail productivity and each store's equilibrium response to increased competitive pressure from online retailers. The model is estimated on confidential store-level data spanning the universe of US retail stores, detailed local-level demographic data and shortest-route data between locations. From counterfactual exercises mimicking improvements in shipping and increased ...

  11. Retailer opinions about and compliance with family smoking prevention and tobacco control act point of sale provisions: a survey of tobacco retailers.

    Science.gov (United States)

    Rose, Shyanika W; Emery, Sherry L; Ennett, Susan; Reyes, Heathe Luz McNaughton; Scott, John C; Ribisl, Kurt M

    2015-09-11

    The objectives of this study were to document retailer opinions about tobacco control policy at the point of sale (POS) and link these opinions with store level compliance with sales and marketing provisions of the Tobacco Control Act. This study conducted interviews of 252 tobacco retailers in three counties in North Carolina and linked their opinions with in-person observational audit data of their stores' compliance with POS policies. We conducted analyses examining retailer factors associated with noncompliance using Generalized Estimating Equations (GEE) controlling for individual, store, neighborhood, and county factors. Over 90 % of retailers support minors' access provisions and a large minority (over 40 %) support graphic warnings and promotion bans. Low levels of support were found for a potential ban on menthol cigarettes (17 %). Store noncompliance with tobacco control policies was associated with both more reported retailer barriers to compliance and less support for POS policies. Awareness of and source of information about tobacco control regulations were not associated with compliance when accounting for neighborhood and county characteristics. Retailers expressed some support for a wide range of POS policies. Advocates and government agencies tasked with enforcement can work with retailers as stakeholders to enhance support, mitigate barriers, and promote compliance with tobacco control efforts at the point of sale.

  12. Energy Flexibility in Retail Buildings

    DEFF Research Database (Denmark)

    Ma, Zheng; Billanes, Joy Dalmacio; Kjærgaard, Mikkel Baun

    2017-01-01

    Retail buildings has an important role for demand side energy flexibility because of their high energy consumption, variety of energy flexibility resources, and centralized control via building control systems. Energy flexibility requires agreements and collaborations among different actors......), with the discussion of the stakeholders’ roles and their interrelation in delivering energy flexibility with the influential factors to the actual implementation of energy flexible operation of their buildings. Based on a literature analysis, the results cover stakeholders’ types and roles, perceptions (drivers......, barriers, and benefits), energy management activities and technology adoptions, and the stakeholders’ interaction for the energy flexibility in retail buildings....

  13. Customer Experience Management in Retailing

    OpenAIRE

    Kamaladevi B

    2009-01-01

    Survival of fittest & fastest is the mantra of today’s business game. To compete successfully in this business era, the retailer must focus on the customer’s buying experience. To manage a customer’s experience, retailers should understand what “customer experience” actually means. Customer Experience Management is a strategy that focuses the operations and processes of a business around the needs of the individual customer. It represents a strategy that results in a win–win value exchange be...

  14. Retailing Laboratory: Delivering Skills through Experiential Learning

    Science.gov (United States)

    Franco Valdez, Ana Dolores; Valdez Cervantes, Alfonso

    2018-01-01

    Building from a theoretical foundation of active learning, this article describes how using a retail laboratory in an educational curriculum can benefit both students and strategic partners. Students work alongside strategic partners, and the retail laboratory enables them to probe and design novel retailing strategies, such as launching new…

  15. Organisational identity and food retailers' buying behaviour

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    How do retailers decide what products to buy? Previous answers to this question have tended to focus on the decisions being made, typically investigating what criteria retail buyers use to choose between products and suppliers (Hansen & Skytte 1998). However, as the decisions made by retail buyer...

  16. 76 FR 28358 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-05-17

    ... \\6\\ (a ``retail forex rule''). Section 2(c)(2)(B)(i)(I) includes ``an agreement, contract, or...)).'' \\7\\ A Federal regulatory agency's retail forex rule must treat all such futures and options and all... codified at 7 U.S.C. 2(c)(2)(E)). In this preamble, citations to the retail forex statutory provisions will...

  17. 76 FR 41375 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-07-14

    ... regulatory agency shall prescribe \\6\\ (a ``retail forex rule''). Section 2(c)(2)(B)(i)(I) includes ``an... of 1934 (15 U.S.C. 78f(a)).'' \\7\\ A Federal regulatory agency's retail forex rule must treat... the retail forex statutory provisions are to the sections in which the provisions will be codified in...

  18. 76 FR 22633 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-04-22

    ... \\6\\ (a ``retail forex rule''). Section 2(c)(2)(B)(i)(I) includes ``an agreement, contract, or...)).'' \\7\\ A Federal regulatory agency's retail forex rule must treat all such futures and options and all... codified at 7 U.S.C. 2(c)(2)(E)). In this preamble, citations to the retail forex statutory provisions will...

  19. 78 FR 42439 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2013-07-16

    ... a retail forex business, provided that the broker-dealer complies with the Securities Exchange Act...) of which the broker-dealer is a member insofar as they are applicable to retail forex transactions... Exchange Act, to permit a registered broker or dealer (``broker-dealer'') to engage in retail forex...

  20. Standardized Curriculum for Service Station Retailing.

    Science.gov (United States)

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    This curriculum guide for service station retailing was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all service station retailing programs in the state. The guide contains objectives for service station retailing I and II courses.…

  1. Application of social media tools by retailers

    NARCIS (Netherlands)

    Alarcon-del-Amo, M.d.C.; Lorenzo-Romero, C.; Constantinides, Efthymios; Eldon, Y.L.; Loh, S.; Evans, C.; Lorenzi, F.

    2013-01-01

    The chapter explores the factors influencing the adoption process and the degree of engagement of the social media as part of the online marketing strategy by Spanish retailers. A retail industry survey identifies four different segments of retailers depending on the level of implementation of

  2. Retailer brand architecture and consumer perceptions

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Stacey, Julia

    2006-01-01

    Which assortment of products and services should retailers offer consumers? Which foods can be deleted from the present assortment? Which brands do retailers have to have in their assortment to satisfy consumer demands? These are a few of the questions food retailers continuously strive to answer...

  3. Retail availability and marketing of electronic cigarettes in Canada.

    Science.gov (United States)

    Hammond, David; White, Christine M; Czoli, Christine D; Martin, Christina L; Magennis, Paul; Shiplo, Samantha

    2015-10-09

    Canada is among an increasing number of countries with restrictions on the sale of electronic cigarettes (e-cigarettes). In Canada, e-cigarettes containing nicotine have not been approved for sale; however, e-cigarettes that do not contain nicotine and do not make health claims can be sold. To date, there is little empirical evidence assessing the retail availability and marketing of e-cigarettes in countries such as Canada. Audits were conducted at 59 brick-and-mortar retail outlets (grocery stores, convenience stores, tobacconist shops and vape shops) in four cities (Vancouver, Toronto, Montreal and Halifax) in August-October 2014. In addition, a total of 21 e-cigarette manufacturer/retailer websites were audited, and inquiries were made as to whether the companies sold nicotine-containing products. Overall, 76% of the retail outlets sold e-cigarette products. Of convenience stores, grocery stores and tobacconist shops with e-cigarettes for sale, the vast majority (94%) sold nicotine-free products only; in contrast, all the vape shops sold at least one nicotine-containing e-cigarette product. Front counter displays were the most common form of in-store promotions and were present in virtually all convenience stores, tobacconist shops and vape shops. Nicotine-containing e-cigarettes were available for purchase at approximately half (52%) of the online e-cigarette retailers surveyed. E-cigarettes with and without nicotine are widely available and marketed at a variety of retail outlets in Canada. "Illegal" sales of nicotinecontaining e-cigarettes were predominantly found at vape shops and online outlets, suggesting limited compliance with existing regulations.

  4. Development of Food Retailing and Factors Affecting the Competition in Food Retailing

    OpenAIRE

    Serkan Kilic; Gokhan Senol

    2010-01-01

    Retailing is a dynamic and complex sector that offers wide range of products and services to consumers. This sector which includes different types of enterprises, has an important position within the supply chain. Food retailing has also a big potential within retailing sector. On the other hand, an intensive competition exists in food retailing. Taking place in the competitive market, food retailers attempt to gain a competitive advantage against their rivals with their geographic location,...

  5. Plasma adiponectin is increased in mice selectively bred for high wheel-running activity, but not by wheel running per se

    NARCIS (Netherlands)

    Vaanholt, L. M.; Meerlo, P.; Garland, T.; Visser, G. H.; van Dijk, G.

    2007-01-01

    Mice selectively bred for high wheel-running activity (S) have decreased fat content compared to mice from randomly bred control (C) lines. We explored whether this difference was associated with alterations in levels of circulating hormones involved in regulation of food intake and energy balance,

  6. The response of a high-speed train wheel to a harmonic wheel-rail force

    International Nuclear Information System (INIS)

    Sheng, Xiaozhen; Liu, Yuxia; Zhou, Xin

    2016-01-01

    The maximum speed of China's high-speed trains currently is 300km/h and expected to increase to 350-400km/h. As a wheel travels along the rail at such a high speed, it is subject to a force rotating at the same speed along its periphery. This fast moving force contains not only the axle load component, but also many components of high frequencies generated from wheel-rail interactions. Rotation of the wheel also introduces centrifugal and gyroscopic effects. How the wheel responds is fundamental to many issues, including wheel-rail contact, traction, wear and noise. In this paper, by making use of its axial symmetry, a special finite element scheme is developed for responses of a train wheel subject to a vertical and harmonic wheel-rail force. This FE scheme only requires a 2D mesh over a cross-section containing the wheel axis but includes all the effects induced by wheel rotation. Nodal displacements, as a periodic function of the cross-section angle 6, can be decomposed, using Fourier series, into a number of components at different circumferential orders. The derived FE equation is solved for each circumferential order. The sum of responses at all circumferential orders gives the actual response of the wheel. (paper)

  7. Minisatellite Attitude Guidance Using Reaction Wheels

    Directory of Open Access Journals (Sweden)

    Ion STROE

    2015-06-01

    Full Text Available In a previous paper [2], the active torques needed for the minisatellite attitude guidance from one fixed attitude posture to another fixed attitude posture were determined using an inverse dynamics method. But when considering reaction/momentum wheels, instead of this active torques computation, the purpose is to compute the angular velocities of the three reaction wheels which ensure the minisatellite to rotate from the initial to the final attitude. This paper presents this computation of reaction wheels angular velocities using a similar inverse dynamics method based on inverting Euler’s equations of motion for a rigid body with one fixed point, written in the framework of the x-y-z sequence of rotations parameterization. For the particular case A=B not equal C of an axisymmetric minisatellite, the two computations are compared: the active torques computation versus the computation of reaction wheels angular velocities ̇x , ̇y and ̇z. An interesting observation comes out from this numerical study: if the three reaction wheels are identical (with Iw the moment of inertia of one reaction wheel with respect to its central axis, then the evolutions in time of the products between Iw and the derivatives of the reaction wheels angular velocities, i.e. ̇ , ̇ and ̇ remain the same and do not depend on the moment of inertia Iw.

  8. Impact of wheel running on chronic ethanol intake in aged Syrian hamsters.

    Science.gov (United States)

    Brager, Allison J; Hammer, Steven B

    2012-10-10

    Alcohol dependence in aging populations is seen as a public health concern, most recently because of the significant proportion of heavy drinking among "Baby Boomers." Basic animal research on the effects of aging on physiological and behavioral regulation of ethanol (EtOH) intake is sparse, since most of this research is limited to younger models of alcoholism. Here, EtOH drinking and preference were measured in groups of aged Syrian hamsters. Further, because voluntary exercise (wheel-running) is a rewarding substitute for EtOH in young adult hamsters, the potential for such reward substitution was also assessed. Aged (24 month-old) male hamsters were subjected to a three-stage regimen of free-choice EtOH (20% v/v) or water and unlocked or locked running wheels to investigate the modulatory effects of voluntary wheel running on EtOH intake and preference. Levels of fluid intake and activity were recorded daily across 60 days of experimentation. Prior to wheel running, levels of EtOH intake were significantly less than levels of water intake, resulting in a low preference for EtOH (30%). Hamsters with access to an unlocked running wheel had decreased EtOH intake and preference compared with hamsters with access to a locked running wheel. These group differences in EtOH intake and preference were sustained for up to 10 days after running wheels were re-locked. These results extend upon those of our previous work in young adult hamsters, indicating that aging dampens EtOH intake and preference. Voluntary wheel running further limited EtOH intake, suggesting that exercise could offer a practical approach for managing late-life alcoholism. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Profit margins in Japanese retailing

    NARCIS (Netherlands)

    J.C.A. Potjes; A.R. Thurik (Roy)

    1993-01-01

    textabstractUsing a rich data source, we explain differences and developments in profit margins of medium-sized stores in Japan. We conclude that the protected environment enables the retailer to pass on all operating costs to the customers and to obtain a relatively high basic income. High service

  10. Rethinking how retail buyers make buying decisions

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    The nature of retailer buying is changing, but not so our conceptualisations. Existing literature on retailer buying is characterised by a rather narrow focus on what retail buyers decide and which decision criteria they use to make decisions, whereas comparatively little attention has been devoted...... to the processes of how and why certain decisions are made. This paper aims to move beyond a focus on single decisions as discrete events to viewing retailer buying as something that occurs in ongoing relationally-responsive interaction between retailers and suppliers....

  11. A rotating target wheel system for gammasphere

    International Nuclear Information System (INIS)

    Greene, J. P.

    1999-01-01

    A description is given for a low-mass, rotating target wheel to be used within the Gammasphere target chamber. This system was developed for experiments employing high beam currents in order to extend lifetimes of targets using low-melting point target material. The design is based on a previously successful implementation of rotating target wheels for the Argonne Positron Experiment (APEX) as well as the Fragment Mass Analyser (FMA) at ATLAS (Argonne Tandem Linac Accelerator System). A brief history of these rotating target wheel systems is given as well as a discussion on target preparation and performance

  12. Why Animals Run on Legs, Not on Wheels.

    Science.gov (United States)

    Diamond, Jared

    1983-01-01

    Speculates why animals have not developed wheels in place of inefficient legs. One study cited suggests three reasons why animals are better off without wheels: wheels are efficient only on hard surfaces, limitation of wheeled motion due to vertical obstructions, and the problem of turning in spaces cluttered with obstacles. (JN)

  13. Wheel set run profile renewing method effectiveness estimation

    OpenAIRE

    Somov, Dmitrij; Bazaras, Žilvinas; Žukauskaite, Orinta

    2010-01-01

    At all the repair enterprises, despite decreased rim wear-off resistance, after every grinding only geometry wheel profile parameters are renewed. Exploit wheel rim work edge decrease tendency is noticed what induces acquiring new wheels. This is related to considerable axle load and train speed increase and also because of wheel work edge repair method imperfection.

  14. 49 CFR 230.113 - Wheels and tire defects.

    Science.gov (United States)

    2010-10-01

    ... tires may not have a seam running lengthwise that is within 33/4 inches of the flange. (g) Worn flanges... 49 Transportation 4 2010-10-01 2010-10-01 false Wheels and tire defects. 230.113 Section 230.113... Tenders Wheels and Tires § 230.113 Wheels and tire defects. Steam locomotive and tender wheels or tires...

  15. Vape shop retailers' perceptions of their customers, products and services: A content analysis.

    Science.gov (United States)

    Tsai, Jennifer Y; Bluthenthal, Ricky; Allem, Jon-Patrick; Garcia, Robert; Garcia, Jocelyn; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve Y

    2016-01-01

    The popularity of electronic cigarettes (e-cigarettes) has spurred the growth of vape shops, but little is known about the retailers who may play an important role in the introduction and dissemination of vape products. In this paper we examine how retailers profile their customers and their perceptions of vaping, and the services their shops provide. Semi-structured interviews were conducted with a convenience sample of retailers (n=77) located across southern California. Open-ended questions were coded and analyzed using a content analysis approach. Three themes emerged from the content analysis: who vapes, why people vape, and the vape shop environment. Retailers profiled customers as friendly, health conscious, and interested in tobacco cessation or cessation maintenance. Retailers believed e-cigarettes were used recreationally or as products that help curb other addictive behaviors. While most retailers reported positive experiences with vaping, some reported potentially negative experiences including failed cessation attempts, dual use of e-cigarettes and combustible cigarettes, and increased nicotine dependence. Retailers reported that they regularly answer questions about vaping and believe their shops function as social lounges that are tied to other recreational activities. Retailers attach certain characteristics to their clientele, perceive certain health benefits associated with vaping, and seek to establish their shops as places that provide guidance on vape products as well as shops with a recreational aesthetic. As vape shops grow in popularity, additional research on, and regulation of, these retailers will be necessary. Education campaigns are needed to inform retailers of the benefits and consequences of vaping.

  16. Reinventing the wheel: comparison of two wheel cage styles for assessing mouse voluntary running activity.

    Science.gov (United States)

    Seward, T; Harfmann, B D; Esser, K A; Schroder, E A

    2018-04-01

    Voluntary wheel cage assessment of mouse activity is commonly employed in exercise and behavioral research. Currently, no standardization for wheel cages exists resulting in an inability to compare results among data from different laboratories. The purpose of this study was to determine whether the distance run or average speed data differ depending on the use of two commonly used commercially available wheel cage systems. Two different wheel cages with structurally similar but functionally different wheels (electromechanical switch vs. magnetic switch) were compared side-by-side to measure wheel running data differences. Other variables, including enrichment and cage location, were also tested to assess potential impacts on the running wheel data. We found that cages with the electromechanical switch had greater inherent wheel resistance and consistently led to greater running distance per day and higher average running speed. Mice rapidly, within 1-2 days, adapted their running behavior to the type of experimental switch used, suggesting these running differences are more behavioral than due to intrinsic musculoskeletal, cardiovascular, or metabolic limits. The presence of enrichment or location of the cage had no detectable impact on voluntary wheel running. These results demonstrate that mice run differing amounts depending on the type of cage and switch mechanism used and thus investigators need to report wheel cage type/wheel resistance and use caution when interpreting distance/speed run across studies. NEW & NOTEWORTHY The results of this study highlight that mice will run different distances per day and average speed based on the inherent resistance present in the switch mechanism used to record data. Rapid changes in running behavior for the same mouse in the different cages demonstrate that a strong behavioral factor contributes to classic exercise outcomes in mice. Caution needs to be taken when interpreting mouse voluntary wheel running activity to

  17. Workshop: Rethinking the profession and education of retail design

    OpenAIRE

    Quartier, Katelijn; Claes, Stephanie; Vanrie, Jan

    2016-01-01

    We strongly believe retail design is becoming a discipline in its own right. Today, the growth of digital technology asks for new ways of retailing. The intertwining of retail and society makes it challenging for retailers to stay relevant in relation to the consumers changing habits. Fitch believed that ‘shopping is the purpose of life’ (Fitch, 2012). His belief shifted the way all stakeholders in retail thought about what retail and retail design should be about. By rec...

  18. The Influence of Wheel/Rail Contact Conditions on the Microstructure and Hardness of Railway Wheels

    Directory of Open Access Journals (Sweden)

    Paul Molyneux-Berry

    2014-01-01

    Full Text Available The susceptibility of railway wheels to wear and rolling contact fatigue damage is influenced by the properties of the wheel material. These are influenced by the steel composition, wheel manufacturing process, and thermal and mechanical loading during operation. The in-service properties therefore vary with depth below the surface and with position across the wheel tread. This paper discusses the stress history at the wheel/rail contact (derived from dynamic simulations and observed variations in hardness and microstructure. It is shown that the hardness of an “in-service” wheel rim varies significantly, with three distinct effects. The underlying hardness trend with depth can be related to microstructural changes during manufacturing (proeutectoid ferrite fraction and pearlite lamellae spacing. The near-surface layer exhibits plastic flow and microstructural shear, especially in regions which experience high tangential forces when curving, with consequentially higher hardness values. Between 1 mm and 7 mm depth, the wheel/rail contacts cause stresses exceeding the material yield stress, leading to work hardening, without a macroscopic change in microstructure. These changes in material properties through the depth of the wheel rim would tend to increase the likelihood of crack initiation on wheels toward the end of their life. This correlates with observations from several train fleets.

  19. An Ultrasonic Wheel-Array Probe

    Science.gov (United States)

    Drinkwater, B. W.; Brotherhood, C. J.; Freemantle, R. J.

    2004-02-01

    This paper describes the development and modeling of an ultrasonic array wheel probe scanning system. The system operates at 10 MHz using a 64 element array transducer which is 50 mm in length and located in a fluid filled wheel. The wheel is coupled to the test structure dry, or with a small amount of liquid couplant. When the wheel is rolled over the surface of the test structure a defect map (C-Scan) is generated in real-time. The tyre is made from a soft, durable polymer which has very little acoustic loss. Two application studies are presented; the inspection of sealant layers in an aluminum aircraft wing structure and the detection of embedded defects in a thick section carbon composite sample.

  20. Multiple Wheel Throwing: And Chess Sets.

    Science.gov (United States)

    Sapiro, Maurice

    1978-01-01

    A chess set project is suggested to teach multiple throwing, the creation on a potter's wheel of several pieces of similar configuration. Processes and finished sets are illustrated with photographs. (SJL)

  1. UT Biomedical Informatics Lab (BMIL) probability wheel

    Science.gov (United States)

    Huang, Sheng-Cheng; Lee, Sara; Wang, Allen; Cantor, Scott B.; Sun, Clement; Fan, Kaili; Reece, Gregory P.; Kim, Min Soon; Markey, Mia K.

    A probability wheel app is intended to facilitate communication between two people, an "investigator" and a "participant", about uncertainties inherent in decision-making. Traditionally, a probability wheel is a mechanical prop with two colored slices. A user adjusts the sizes of the slices to indicate the relative value of the probabilities assigned to them. A probability wheel can improve the adjustment process and attenuate the effect of anchoring bias when it is used to estimate or communicate probabilities of outcomes. The goal of this work was to develop a mobile application of the probability wheel that is portable, easily available, and more versatile. We provide a motivating example from medical decision-making, but the tool is widely applicable for researchers in the decision sciences.

  2. ANALYSIS OF FORMING TREAD WHEEL SETS

    Directory of Open Access Journals (Sweden)

    Igor IVANOV

    2017-09-01

    Full Text Available This paper shows the results of a theoretical study of profile high-speed grinding (PHSG for forming tread wheel sets during repair instead of turning and mold-milling. Significant disadvantages of these methods are low capacity to adapt to the tool and inhomogeneous structure of the wheel material. This leads to understated treatment regimens and difficulties in recovering wheel sets with thermal and mechanical defects. This study carried out modeling and analysis of emerging cutting forces. Proposed algorithms describe the random occurrence of the components of the cutting forces in the restoration profile of wheel sets with an inhomogeneous structure of the material. To identify the statistical features of randomly generated structures fractal dimension and the method of random additions were used. The multifractal spectrum formed is decomposed into monofractals by wavelet transform. The proposed method allows you to create the preconditions for controlling the parameters of the treatment process.

  3. Electrostatic Spectrometer for Mars Rover Wheel

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a simple electrostatic spectrometer that can be mounted on the wheels of a Mars rover to continuously and unobtrusively determine the mineral composition and...

  4. Benefits of magnesium wheels for consumer cars

    Science.gov (United States)

    Frishfelds, Vilnis; Timuhins, Andrejs; Bethers, Uldis

    2018-05-01

    Advantages and disadvantages of magnesium wheels are considered based on a mechanical model of a car. Magnesium wheels are usually applied to racing cars as they provide slightly better strength/weight ratio than aluminum alloys. Do they provide notable benefits also for the everyday user when the car speeds do not exceed allowed speed limit? Distinct properties of magnesium rims are discussed. Apart from lighter weight of magnesium alloys, they are also good in dissipating the energy of vibrations. The role of energy dissipation in the rim of a wheel is estimated by a quarter car model. Improvements to safety by using the magnesium wheels are considered. Braking distance and responsiveness of the car is studied both with and without using an Anti Blocking System (ABS). Influence of rim weight on various handling parameters of the car is quantitatively tested.

  5. Retail unbundling: how much progress has been made?

    International Nuclear Information System (INIS)

    Bennett, P.

    1999-01-01

    Bentek Consulting Services is a power market research and management consulting firm that provides information and analytical services to large non-regulated retail marketing companies. Their studies have indicated that retail unbundling in the the U.S. energy sector is unfolding too slowly because many local distribution companies (LDCs) are subverting the process and many marketers make the problem worse with bad management. In an unbundled market, the local utilities' monopoly merchant role will be replaced by numerous competitive energy merchants. Both customers and suppliers could benefit financially from unbundling. In addition, unbundling holds promise for more efficient use of resources. One way to determine the success of unbundling is to determine how many customers have actually switched to a non-regulated utility. The numbers vary from a low in California of 5 per cent to a high of more than 50 per cent in Pennsylvania. The factors that determine customer participation were also reviewed. 2 tabs., 11 figs

  6. Mathematical Modeling of the Braking System of Wheeled Mainline Aircraft

    Directory of Open Access Journals (Sweden)

    I. S. Shumilov

    2016-01-01

    Full Text Available The braking system of the landing gear wheels of a mainline aircraft has to meet mandatory requirements laid out in the Aviation Regulations AP-25 (Para 25.735. «Brakes and brake systems". These requirements are essential when creating the landing gear wheel brake control system (WBCS and are used as main initial data in its mathematical modeling. The WBCS is one of the most important systems to ensure the safe completion of the flight. It is a complex of devices, i.e. units (hydraulic, electrical, and mechanical, connected through piping, wiring, mechanical constraints. This complex should allow optimizing the braking process when a large number of parameters change. The most important of them are the following: runway friction coefficient (RFC, lifting force, weight and of the aircraft, etc. The main structural elements involved in braking the aircraft are: aircraft wheels with pneumatics (air tires and brake discs, WBCS, and cooling system of gear wheels when braking.To consider the aircraft deceleration on the landing run is of essence at the stage of design, development, and improvement of brakes and braking systems. Based on analysis of equation of the aircraft motion and energy balance can be determined energy loading and its basic design parameters, braking distances and braking time.As practice and analysis of energy loading show, they (brake + wheel absorb the aircraftpossessed kinetic energy at the start of braking as much as 60-70%, 70-80%, and 80-90%, respectively, under normal increased, and emergency operating conditions. The paper presents a procedure for the rapid calculation of energy loading of the brake wheel.Currently, the mainline aircrafts use mainly electrohydraulic brake systems in which there are the main, backup, and emergency-parking brake systems. All channels are equipped with automatic anti-skid systems. Their presence in the emergency (the third reserve channel significantly improves the reliability and safety of

  7. A Nontoxic Barlow's Wheel

    Science.gov (United States)

    Daffron, John A.; Greenslade, Thomas B., Jr.

    2015-01-01

    Barlow's wheel has been a favorite demonstration since its invention by Peter Barlow (1776-1862) in 1822. In the form shown in Fig. 1, it represents the first electric motor. The interaction between the electric current passing from the axle of the wheel to the rim and the magnetic field produced by the U-magnet produces a torque that turns…

  8. Containment of fertilizers and pesticides at retail operations

    Energy Technology Data Exchange (ETDEWEB)

    Broder, M.F.

    1990-06-28

    Environmental protection has become as important to the fertilizer retailer as the products and services he offers. Emphasis on environmental protection at the dealer level is largely in response to state regulations designed to protect groundwater. The national Clean Water Act of 1987 gave states the lead in developing groundwater protection strategies. Several states have adopted new or stronger regulations and others are moving to do so. Fertilizer dealers need to keep up with these regulations and promote groundwater protection. This paper describes several containment systems for fertilizers and pesticides to help dealers decide how to modify their plants to protect groundwater.

  9. The new contaminated land power: the implications for petrol retailers

    Energy Technology Data Exchange (ETDEWEB)

    Doolittle, I.

    1995-08-01

    The likely effects of the new contaminated land power, legislation, which is about to become law, are discussed for petroleum retail sites. These sites are owned and operated in a variety of ways and it is expected that as regulations become more rigorous, the number of legal suits against previous owners is set to rise sharply. The various complications of ownership, and liability are also considered. (UK)

  10. The new contaminated land power: the implications for petrol retailers

    International Nuclear Information System (INIS)

    Doolittle, I.

    1995-01-01

    The likely effects of the new contaminated land power, legislation, which is about to become law, are discussed for petroleum retail sites. These sites are owned and operated in a variety of ways and it is expected that as regulations become more rigorous, the number of legal suits against previous owners is set to rise sharply. The various complications of ownership, and liability are also considered. (UK)

  11. Aerodynamic analysis of an isolated vehicle wheel

    Science.gov (United States)

    Leśniewicz, P.; Kulak, M.; Karczewski, M.

    2014-08-01

    Increasing fuel prices force the manufacturers to look into all aspects of car aerodynamics including wheels, tyres and rims in order to minimize their drag. By diminishing the aerodynamic drag of vehicle the fuel consumption will decrease, while driving safety and comfort will improve. In order to properly illustrate the impact of a rotating wheel aerodynamics on the car body, precise analysis of an isolated wheel should be performed beforehand. In order to represent wheel rotation in contact with the ground, presented CFD simulations included Moving Wall boundary as well as Multiple Reference Frame should be performed. Sliding mesh approach is favoured but too costly at the moment. Global and local flow quantities obtained during simulations were compared to an experiment in order to assess the validity of the numerical model. Results of investigation illustrates dependency between type of simulation and coefficients (drag and lift). MRF approach proved to be a better solution giving result closer to experiment. Investigation of the model with contact area between the wheel and the ground helps to illustrate the impact of rotating wheel aerodynamics on the car body.

  12. Aerodynamic analysis of an isolated vehicle wheel

    International Nuclear Information System (INIS)

    Leśniewicz, P; Kulak, M; Karczewski, M

    2014-01-01

    Increasing fuel prices force the manufacturers to look into all aspects of car aerodynamics including wheels, tyres and rims in order to minimize their drag. By diminishing the aerodynamic drag of vehicle the fuel consumption will decrease, while driving safety and comfort will improve. In order to properly illustrate the impact of a rotating wheel aerodynamics on the car body, precise analysis of an isolated wheel should be performed beforehand. In order to represent wheel rotation in contact with the ground, presented CFD simulations included Moving Wall boundary as well as Multiple Reference Frame should be performed. Sliding mesh approach is favoured but too costly at the moment. Global and local flow quantities obtained during simulations were compared to an experiment in order to assess the validity of the numerical model. Results of investigation illustrates dependency between type of simulation and coefficients (drag and lift). MRF approach proved to be a better solution giving result closer to experiment. Investigation of the model with contact area between the wheel and the ground helps to illustrate the impact of rotating wheel aerodynamics on the car body.

  13. High frequency vibration characteristics of electric wheel system under in-wheel motor torque ripple

    Science.gov (United States)

    Mao, Yu; Zuo, Shuguang; Wu, Xudong; Duan, Xianglei

    2017-07-01

    With the introduction of in-wheel motor, the electric wheel system encounters new vibration problems brought by motor torque ripple excitation. In order to analyze new vibration characteristics of electric wheel system, torque ripple of in-wheel motor based on motor module and vector control system is primarily analyzed, and frequency/order features of the torque ripple are discussed. Then quarter vehicle-electric wheel system (QV-EWS) dynamics model based on the rigid ring tire assumption is established and the main parameters of the model are identified according to tire free modal test. Modal characteristics of the model are further analyzed. The analysis indicates that torque excitation of in-wheel motor is prone to arouse horizontal vibration, in which in-phase rotational, anti-phase rotational and horizontal translational modes of electric wheel system mainly participate. Based on the model, vibration responses of the QV-EWS under torque ripple are simulated. The results show that unlike vertical low frequency (lower than 20 Hz) vibration excited by road roughness, broadband torque ripple will arouse horizontal high frequency (50-100 Hz) vibration of electric wheel system due to participation of the three aforementioned modes. To verify the theoretical analysis, the bench experiment of electric wheel system is conducted and vibration responses are acquired. The experiment demonstrates the high frequency vibration phenomenon of electric wheel system and the measured order features as well as main resonant frequencies agree with simulation results. Through theoretical modeling, analysis and experiments this paper reveals and explains the high frequency vibration characteristics of electric wheel system, providing references for the dynamic analysis, optimal design of QV-EWS.

  14. The factors of retail brand positioning

    Directory of Open Access Journals (Sweden)

    Filipović Vinka

    2010-01-01

    Full Text Available This paper gives the basic characteristics of a retail process as a function of the development of a successful brand. The retail network is continuously progressing, developing its abilities, successfully adjusting to its environment, and which is the most important it is persistently following wishes and needs of its consumers, and is satisfying them through high-quality offers. The retail network is relatively a new business structure, which has a great potential for competitive advantage. Once, prestigious partners to retailers, which have represented successful brands, they are often perceived to be stripped of rank and to come back at the level of common suppliers. Also, the suppliers' brands have no longer the position as they had, their status has decreased and their former power is gone, as a more superior, compared to the retailers. The inertia, enjoying 'the old glory', thinking in the manner of the same well-established formula as well as the inability to adjust themselves to the changes occurring among consumers have led the majority of the brands to be stuck in the past. The companies have to stop this increasing phenomenon, if they do not want to face in the near future, even more dramatic and more harmful consequences. Since the main aim of the research, performed in this work, was to determine the importance of retail brand positioning, the retail environment was analyzed, with special emphases on the consumer role in retail, and factors of successful retail activities. As a special aspect of successful retail, the environment of retail place was determined and within this, the effects of the retail places' atmosphere. For setting the retail strategy framework, the following basic entities are observed: product, price, exclusivity, quick response, information technology, price strategy, logistics and competitiveness. .

  15. Retail competition in electricity markets

    International Nuclear Information System (INIS)

    Defeuilley, Christophe

    2009-01-01

    The introduction of competition into retail electricity supply gave rise to great expectations. However, to date, its performance has proven less than stellar, owing primarily to the theoretical concepts underpinning this reform, which draw heavily on the Austrian school. Neither consumers' decision processes nor this sector's technical paradigm were adequately accounted for, leading to an uncorrect estimation of the expected impact of opening to competition. Short- and medium-term prospects for the evolution of retail markets must be reconsidered from the perspective of greater stability: not a generalization of competition, but rather a persistent segmentation between active and inactive clients; not a large and rapid diffusion of radical innovations in commercialisation, with the potential for undermining the incumbents' positions

  16. Retail competition in electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Defeuilley, Christophe [LARSEN and EDF R and D, Fontenay aux Roses (France)

    2009-02-15

    The introduction of competition into retail electricity supply gave rise to great expectations. However, to date, its performance has proven less than stellar, owing primarily to the theoretical concepts underpinning this reform, which draw heavily on the Austrian school. Neither consumers' decision processes nor this sector's technical paradigm were adequately accounted for, leading to an uncorrect estimation of the expected impact of opening to competition. Short- and medium-term prospects for the evolution of retail markets must be reconsidered from the perspective of greater stability: not a generalization of competition, but rather a persistent segmentation between active and inactive clients; not a large and rapid diffusion of radical innovations in commercialisation, with the potential for undermining the incumbents' positions. (author)

  17. Executing the Perfect Retail Brand

    DEFF Research Database (Denmark)

    Gyrd-Jones, Richard; Rygaard Jonas, Louise

    The alignment of employees around the corporate brand has emerged as a major area of study in corporate and service branding literature generally and in the retail branding literature in particular. Corporate brand scholars are focused on achieving coherence in brand expressions. Traditionally fo...... and management levels in the organisation. It is argued that responsibility for brand expressions should be more decentralised.......The alignment of employees around the corporate brand has emerged as a major area of study in corporate and service branding literature generally and in the retail branding literature in particular. Corporate brand scholars are focused on achieving coherence in brand expressions. Traditionally...... focus has been on using corporate communication to align employees around the corporate brand to achieve this. Through in-depth, longitudinal, ethnographic research this paper suggests that coherence can only be achieved by understanding the complex interplay of identities between occupational groups...

  18. Project considerations and design of systems for wheeling cogenerated power

    Energy Technology Data Exchange (ETDEWEB)

    Tessmer, R.G. Jr.; Boyle, J.R.; Fish, J.H. III; Martin, W.A.

    1994-08-01

    Wheeling electric power, the transmission of electricity not owned by an electric utility over its transmission lines, is a term not generally recognized outside the electric utility industry. Investigation of the term`s origin is intriguing. For centuries, wheel has been used to describe an entire machine, not just individual wheels within a machine. Thus we have waterwheel, spinning wheel, potter`s wheel and, for an automobile, wheels. Wheel as a verb connotes transmission or modification of forces and motion in machinery. With the advent of an understanding of electricity, use of the word wheel was extended to be transmission of electric power as well as mechanical power. Today, use of the term wheeling electric power is restricted to utility transmission of power that it doesn`t own. Cogeneration refers to simultaneous production of electric and thermal power from an energy source. This is more efficient than separate production of electricity and thermal power and, in many instances, less expensive.

  19. Eastern European retailers and wholesalers' buying behaviour

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Stacey, Julia

    1999-01-01

    During the last ten years, retailing in Eastern Europe has undergone considerable changes. The entry of Western European retail chains into Eastern Europe has helped accelerate the distributive trade of Eastern Europe. But what does it take to sell fish and cheese to retailers and wholesalers...... in Eastern Europe compared to Western Europe? Eastern European buyers attach great importance to other aspects when they list new suppliers and products than does Western European retailing. These are the results of a MAPP study of Eastern European retail and wholesale buying behaviour for fish and cheese....... Low prices and favourable terms of payment are most important when retailers in Eastern Europe buy fish and cheese. Then follows the supplier's range of products, trustworthiness of the supplier and product quality. Eastern European wholesalers also rank price and financial conditions as most...

  20. Shopper marketing strategy in food retailing

    Directory of Open Access Journals (Sweden)

    Bogetić Zoran

    2016-01-01

    Full Text Available The leading role of retailers in food industry marketing channels significantly contributes to shopper marketing affirmation. Shopper marketing is a new marketing paradigm which focuses on the shopper and point-of-sale. Results of thorough literature review on shopper marketing have been presented in this paper. In addition, research methodology includes surveying 1000 shoppers in food retail stores in Belgrade area. The paper considers and analyzes the characteristics of urban food retail market shoppers, and based on the findings of the conducted research concludes that adaptation of shopper marketing strategies is necessary. Significant research finding is that shoppers' perceptions in food retail market require a profiled approach to retail store strategy adjustments, which includes shopper marketing programs and activities. The paper opens a number of questions regarding possible approaches to shopper marketing by crisscrossing the variables of retail formats, sex, and shoppers' income categories.

  1. The brand architecture of grocery retailers

    DEFF Research Database (Denmark)

    Bech-Larsen, Tino; Esbjerg, Lars

    2009-01-01

    This article discusses how the brand architecture of grocery retailers set material and symbolic boundaries for consumer choice, thus limiting consumer sovereignty. The article first discusses previous work on store atmospherics, servicescapes and brand architecture. It is argued that work based...... on these concepts has taken an internal management perspective on how retailers can manipulate aspects of the retail setting to serve their own interests. Then, we develop an alternative conceptualisation of retailer brand architecture that takes into account that consumers (and other constituents) are active co......- constructors of material and symbolic aspects of retail settings. It is discussed how consumers participate in constructing retailer brand architecture and how this concept differs from previous research. Implications for both research and practice are discussed....

  2. Design of Wheeled Mobile Robot with Tri-Star Wheel as Rescue Robot

    Directory of Open Access Journals (Sweden)

    Rafiuddin Syam

    2016-05-01

    Full Text Available This study aims to design, and analyze a mobilerobot that can handle some of the obstacles, they are unevensurfaces, slopes, can also climb stairs. WMR in this study is Tristarwheel that is containing three wheels for each set. Onaverage surface only two wheels in contact with the surface, ifthere is an uneven surface or obstacle then the third wheel willrotate with the rotation center of the wheel in contact with theleading obstacle then only one wheel in contact with the surface.This study uses the C language program. Furthermore, theminimum thrust to be generated torque of the motor andtransmission is 9.56 kg. The results obtained by calculation andanalysis of DC motors used must have a torque greater than14.67 kg.cm. Minimum thrust to be generated motor torque andthe transmission is 9.56 kg. The experimental results give goodresults for robot to moving forward, backward, turn left, turnright and climbing the stairs

  3. Umbrella Wheel - a stair-climbing and obstacle-handling wheel design concept

    DEFF Research Database (Denmark)

    Iversen, Simon; Jouffroy, Jerome

    2017-01-01

    This paper proposes a new design for stair-climbing using a wheel that can split into segments and walk up stairs or surmount other obstacles often found where humans traverse, while still being able to retain a perfectly round shape for traveling on smooth ground. Using this change of configurat......This paper proposes a new design for stair-climbing using a wheel that can split into segments and walk up stairs or surmount other obstacles often found where humans traverse, while still being able to retain a perfectly round shape for traveling on smooth ground. Using this change...... of configuration, staircases with a wide range of dimensions can be covered efficiently and safely. The design, named Umbrella Wheel, can consist of as many wheel segments as desired, and as few as two. A smaller or higher number of wheel segments has advantages and disadvantages depending on the specific...

  4. MARKETING OBJECTIVES AMONG RURAL FOOD RETAILERS

    OpenAIRE

    Stegelin, Forrest E.

    1996-01-01

    Food retailers representing four retailer types (family operated grocery stores, produce markets, meat/egg/dairy markets, and convenience stores) in rural Georgia communities were surveyed as to their marketing objectives. Qualitative marketing objectives were ranked by the marketers as to marketing intentions, and by customers as to marketing expectations. More definitive and quantitative marketing objectives were also ranked by the food retailers as to the priority of implementation in thei...

  5. Retail Tactical Planning: An Aligned Process?

    OpenAIRE

    Dreyer , Heidi; Dukovska-Popovska , Iskra; Kiil , Kasper; Kaipia , Riikka

    2016-01-01

    Part 9: Quality in Production Management; International audience; This paper addresses tactical planning in retailing through a case study approach in one grocery retailing company. The issues are how tactical planning is conducted and how the different plans are connected. The study complements earlier retail planning studies by showing the sequence of planning phases and by studying the fragmented plans as a process. The master category planning is important and sets borders for the other p...

  6. GENDER ASPECTS OF MARKETING COMMUNICATIONS IN RETAIL

    OpenAIRE

    DEPUTATOVA ELENA YURYEVNA

    2016-01-01

    Situation in Russian retail demonstrates a highly competitive structure. Irrespective of segmentation ways, many retailers have still been using common ways of marketing communications and the search of loyal customers remains an elusive target for many companies. The problem is that a great variety of retailers have similar offers both to men and women, ignoring the fact it should be different. The article deals with differences of men and women consumer behavior aspects in choosing shops, t...

  7. Supply Chain Management in Retail Industry

    OpenAIRE

    Ivana Plazibat; Sladana Brajevic

    2009-01-01

    Companies attempt to change their ways of doing business to find out new approaches to customers. Internationalization and consolidation of retailing turned traditional retail industry upside down. Fast and efficient operational models and new technologies constantly challenge retailers. The term supply chain management (SCM) is relatively new in the literature, appearing first in 1982. Supply chain is a set of institutions that moves goods from the point of production to the point of consump...

  8. Retail payments and the real economy

    OpenAIRE

    Hasan, Iftekhar; De Renzis, Tania; Schmiedel, Heiko

    2013-01-01

    This paper examines the fundamental relationship between retail payments and the real economy. Using data from across 27 European markets over the period 1995-2009, the results confirm that migration to efficient electronic retail payments stimulates the overall economy, consumption and trade. Among different payment instruments, this relationship is strongest for card payments, followed by credit transfers. Cheque payments are found to have a relatively low macroeconomic impact. Retail payme...

  9. New Trends in Logistics as Retail Support

    OpenAIRE

    Sanda Renko; Dejan Ficko; Kristina Petljak

    2009-01-01

    Abstract Informatisation, internationalisation and globalisation have dramatically changed retail sector; speeding up the retail processes, creating new sale formats, fastening the increase of income etc. During the last decade, logistics influenced the development of retailing by cutting down costs and increasing the service quality level. The main purpose of this paper is to give a comprehensive review of market trends that affected logistics and directly caused changes in Croatian retailin...

  10. Potentials of RFID Application in Retailing

    DEFF Research Database (Denmark)

    Foscht, Thomas; Kotzab, Herbert; Maloles III, Cesar

    2008-01-01

    The willingness of retailers to adopt RFID systems, as well as finding optimal RFID applications has yet not been investigated. This paper examines the issues associated with the RFID adoption based on the results of a conjoint analysis. The conjoint measurement looked at the trade-off decisions...... among different possible set-ups of RFID applications in retailing companies. Considerable willingness to adopt, but low diffusion and a structure of preferences with respect to RFID features was shown throughout the examined retailing companies. Furthermore, differences were shown among different types...... of retailers in their preferences for RFID system features and clusters were implied....

  11. Retail video analytics: an overview and survey

    Science.gov (United States)

    Connell, Jonathan; Fan, Quanfu; Gabbur, Prasad; Haas, Norman; Pankanti, Sharath; Trinh, Hoang

    2013-03-01

    Today retail video analytics has gone beyond the traditional domain of security and loss prevention by providing retailers insightful business intelligence such as store traffic statistics and queue data. Such information allows for enhanced customer experience, optimized store performance, reduced operational costs, and ultimately higher profitability. This paper gives an overview of various camera-based applications in retail as well as the state-ofthe- art computer vision techniques behind them. It also presents some of the promising technical directions for exploration in retail video analytics.

  12. Implementation of Integrated Retail Module (IRM)

    National Research Council Canada - National Science Library

    Perrin, Richard A; Bona, Richard E; Brekhus, Dennis A; Padilla, Robert J

    2005-01-01

    ...) systems for achieving reduced military clothing inventories though automated systems providing asset visibility at the wholesale retail and manufacturing levels and balanced flow replenishment...

  13. Retail Consulting Class: Experiential Learning Platform to Develop Future Retail Talents

    Science.gov (United States)

    Oh, Hyunjoo; Polidan, Mary

    2018-01-01

    The retail industry is undergoing a significant transformation. Factors such as technological advancement and evolving consumer demands have forced companies to rethink their traditional approaches to retail. Retailers have since embraced data-driven strategies with real-time implementation to stay relevant in this complex, ever-changing industry.…

  14. Reaction Wheel Disturbance Model Extraction Software - RWDMES

    Science.gov (United States)

    Blaurock, Carl

    2009-01-01

    The RWDMES is a tool for modeling the disturbances imparted on spacecraft by spinning reaction wheels. Reaction wheels are usually the largest disturbance source on a precision pointing spacecraft, and can be the dominating source of pointing error. Accurate knowledge of the disturbance environment is critical to accurate prediction of the pointing performance. In the past, it has been difficult to extract an accurate wheel disturbance model since the forcing mechanisms are difficult to model physically, and the forcing amplitudes are filtered by the dynamics of the reaction wheel. RWDMES captures the wheel-induced disturbances using a hybrid physical/empirical model that is extracted directly from measured forcing data. The empirical models capture the tonal forces that occur at harmonics of the spin rate, and the broadband forces that arise from random effects. The empirical forcing functions are filtered by a physical model of the wheel structure that includes spin-rate-dependent moments (gyroscopic terms). The resulting hybrid model creates a highly accurate prediction of wheel-induced forces. It accounts for variation in disturbance frequency, as well as the shifts in structural amplification by the whirl modes, as the spin rate changes. This software provides a point-and-click environment for producing accurate models with minimal user effort. Where conventional approaches may take weeks to produce a model of variable quality, RWDMES can create a demonstrably high accuracy model in two hours. The software consists of a graphical user interface (GUI) that enables the user to specify all analysis parameters, to evaluate analysis results and to iteratively refine the model. Underlying algorithms automatically extract disturbance harmonics, initialize and tune harmonic models, and initialize and tune broadband noise models. The component steps are described in the RWDMES user s guide and include: converting time domain data to waterfall PSDs (power spectral

  15. Light, Low, Mild, and Similar Terms: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    This podcast helps raise retailers' and manufacturers' awareness of the new federal tobacco regulations. Under the new regulations, manufacturers can not produce any tobacco products labeled or advertised as "light," "low," or "mild." As of July 21, 2010, manufacturers may no longer distribute these products.

  16. Wheeling rates evaluation using optimal power flows

    International Nuclear Information System (INIS)

    Muchayi, M.; El-Hawary, M. E.

    1998-01-01

    Wheeling is the transmission of electrical power and reactive power from a seller to a buyer through a transmission network owned by a third party. The wheeling rates are then the prices charged by the third party for the use of its network. This paper proposes and evaluates a strategy for pricing wheeling power using a pricing algorithm that in addition to the fuel cost for generation incorporates the optimal allocation of the transmission system operating cost, based on time-of-use pricing. The algorithm is implemented for the IEEE standard 14 and 30 bus system which involves solving a modified optimal power flow problem iteratively. The base of the proposed algorithm is the hourly spot price. The analysis spans a total time period of 24 hours. Unlike other algorithms that use DC models, the proposed model captures wheeling rates of both real and reactive power. Based on the evaluation, it was concluded that the model has the potential for wide application in calculating wheeling rates in a deregulated competitive power transmission environment. 9 refs., 3 tabs

  17. High Fat High Sugar Diet Reduces Voluntary Wheel Running in Mice Independent of Sex Hormone Involvement

    Science.gov (United States)

    Vellers, Heather L.; Letsinger, Ayland C.; Walker, Nicholas R.; Granados, Jorge Z.; Lightfoot, J. Timothy

    2017-01-01

    Introduction: Indirect results in humans suggest that chronic overfeeding decreases physical activity with few suggestions regarding what mechanism(s) may link overfeeding and decreased activity. The primary sex hormones are known regulators of activity and there are reports that chronic overfeeding alters sex hormone levels. Thepurpose of this study was to determine if chronic overfeeding altered wheel running through altered sex hormone levels. Materials and Methods: C57BL/6J mice were bred and the pups were weaned at 3-weeks of age and randomly assigned to either a control (CFD) or high fat/high sugar (HFHS) diet for 9–11 weeks depending on activity analysis. Nutritional intake, body composition, sex hormone levels, and 3-day and 2-week wheel-running activity were measured. Additionally, groups of HFHS animals were supplemented with testosterone (males) and 17β-estradiol (females) to determine if sex hormone augmentation altered diet-induced changes in activity. Results: 117 mice (56♂, 61♀) were analyzed. The HFHS mice consumed significantly more calories per day than CFD mice (male: p running-wheel distance in male (p = 0.05, 70 ± 28%) and female mice (p = 0.02, 57 ± 26%). In animals that received hormone supplementation, there was no significant effect on activity levels. Two-weeks of wheel access was not sufficient to alter HFHS-induced reductions in activity or increases in body fat. Conclusion: Chronic overfeeding reduces wheel running, but is independent of the primary sex hormones. PMID:28890701

  18. Enabling smart retail settings via mobile augmented reality shopping apps

    OpenAIRE

    Dacko, Scott

    2017-01-01

    Retail settings are being challenged to become smarter and provide greater value to both consumers and retailers. An increasingly recognised approach having potential for enabling smart retail is mobile augmented reality (MAR) apps. In this research, we seek to describe and discover how, why and to what extent MAR apps contribute to smart retail settings by creating additional value to customers as well as benefiting retailers. In particular, by adopting a retail customer experience perspecti...

  19. The Impact of Retail Formats on the Development of Food Retailing

    Directory of Open Access Journals (Sweden)

    Sreten Ćuzović

    2017-03-01

    Full Text Available Objective: The main objective of this paper is to analyse the development of retail formats and their impact on the development of food retailing, through empirical testing of the largest food retailers within the timeframe 2009-2014. Research Design & Methods: This paper shall, in addition to the review of literature on the development of retail formats, focus on the analysis of the Global Power of Retailing report 2011-2016. Statistical material consists of the available data on the ranking of the largest retail companies, viewed by sales volume, in the period from 2009 to 2014, published annually by the consulting firm, Deloitte Touche. Findings: The research results show the dominant share of food retailers in the total number of retailers in the list of Top 250 retailers. In addition, the results point to a different structure of food retail formats in the period from 2009 to 2014. The position of individual food retailers in the list of the most successful ones changes over time and standard multiple regression results show that this is due to the introduction of new retail formats. Implications & Recommendations: Continuing innovation in the field of retail formats is very important to food retailers. Decision makers need to pay special attention and focus on increasing the sales volume and better ranking of companies in the list of most successful ones, where one of the factors is the introduction of new retail formats. Contribution & Value Added: The originality of this work lies in studying some aspects of the FDI inflow into the group of both similar and different countries in terms of economy.

  20. Position Control of the Single Spherical Wheel Mobile Robot by Using the Fuzzy Sliding Mode Controller

    Directory of Open Access Journals (Sweden)

    Hamed Navabi

    2017-01-01

    Full Text Available A spherical wheel robot or Ballbot—a robot that balances on an actuated spherical ball—is a new and recent type of robot in the popular area of mobile robotics. This paper focuses on the modeling and control of such a robot. We apply the Lagrangian method to derive the governing dynamic equations of the system. We also describe a novel Fuzzy Sliding Mode Controller (FSMC implemented to control a spherical wheel mobile robot. The nonlinear nature of the equations makes the controller nontrivial. We compare the performance of four different fuzzy controllers: (a regulation with one signal, (b regulation and position control with one signal, (c regulation and position control with two signals, and (d FSMC for regulation and position control with two signals. The system is evaluated in a realistic simulation and the robot parameters are chosen based on a LEGO platform, so the designed controllers have the ability to be implemented on real hardware.

  1. Evaluation of the 30 Ton CHA Crane Wheel Axle Modification

    International Nuclear Information System (INIS)

    RICH, J.W.

    2002-01-01

    An existing design for eccentric bushings was utilized and updated as necessary to accommodate minor adjustment as required to correct wheel alignment on the North West Idler wheel. The design is revised to install eccentric bushings on only one end

  2. Tensegrital Wheel for Enhanced Surface Mobility, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations introduces the "tensegrital wheel" an inventive concept for wheeled locomotion that exploits the geometric and mechanical attributes of a tensegrity...

  3. Maximum Torque and Momentum Envelopes for Reaction Wheel Arrays

    Science.gov (United States)

    Markley, F. Landis; Reynolds, Reid G.; Liu, Frank X.; Lebsock, Kenneth L.

    2009-01-01

    Spacecraft reaction wheel maneuvers are limited by the maximum torque and/or angular momentum that the wheels can provide. For an n-wheel configuration, the torque or momentum envelope can be obtained by projecting the n-dimensional hypercube, representing the domain boundary of individual wheel torques or momenta, into three dimensional space via the 3xn matrix of wheel axes. In this paper, the properties of the projected hypercube are discussed, and algorithms are proposed for determining this maximal torque or momentum envelope for general wheel configurations. Practical strategies for distributing a prescribed torque or momentum among the n wheels are presented, with special emphasis on configurations of four, five, and six wheels.

  4. Reaction Wheel Disturbance Model Extraction Software, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Reaction wheel disturbances are some of the largest sources of noise on sensitive telescopes. Such wheel-induced mechanical noises are not well characterized....

  5. Manufacturer and retailer brands in food retail assortments: Notes from a shopping trip across Europe

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G.; Bech-Larsen, Tino

    and perform a variety of activities and services, which provide added value in the eyes of consumers (Burt 2000). In this connection, branding is becoming increasingly important, as food retailers develop their own brands within and across product categories. Many retailers are attempting to cultivate...... an overall brand identity in order to protect and identify their market offering (Burt & Sparks 2002). The assortment of products food retailers offer typically includes manufacturer brands, re-tailer brands and generic or unbranded products. In recent years, increasing competition in food retailing has made...... retailers is discussed. Then, the findings from a shopping trip across Europe are presented. Finally, a discussion of the findings is provided and it is briefly considered how the findings of this study were used as input for a study of consumer perceptions of the brand architectures of food retailers...

  6. Do Daily Retail Gasoline Prices adjust Asymmetrically?

    NARCIS (Netherlands)

    L.J.H. Bettendorf (Leon); S.A. van der Geest (Stéphanie); G. Kuper

    2005-01-01

    textabstractThis paper analyzes adjustments in the Dutch retail gasoline prices. We estimate an error correction model on changes in the daily retail price for gasoline (taxes excluded) for the period 1996-2004 taking care of volatility clustering by estimating an EGARCH model. It turns out the

  7. Do daily retail gasoline prices adjust asymmetrically?

    NARCIS (Netherlands)

    Bettendorf, L.; van der Geest, S. A.; Kuper, G. H.

    2009-01-01

    This paper analyses adjustments in the Dutch retail gasoline prices. We estimate an error correction model on changes in the daily retail price for gasoline (taxes excluded) for the period 1996-2004, taking care of volatility clustering by estimating an EGARCH model. It turns out that the volatility

  8. Understanding retail gasoline pricing : An empirical approach

    NARCIS (Netherlands)

    Bruzikas, Tadas

    2017-01-01

    Retail gasoline markets offer an abundance of price data at the daily and, more recently, hourly level. Firms in this industry use sophisticated price strategies. Moreover, there have been a number of important recent market developments. All this makes retail gasoline a promising industry to study

  9. Part-time labour in retailing

    OpenAIRE

    Thurik, Roy; Wijst, Nico

    1984-01-01

    textabstractRetailers have to deal with a fluctuating demand for labor. The use of part-time employees is one of their instruments to cope with these fluctuations. This article gives theoretical considerations regarding the use of part-time labor in the retail trade and empirical evidence regarding the influence of its use on labor productivity.

  10. The concentration of retail in Poland

    Directory of Open Access Journals (Sweden)

    Michał Gazdecki

    2010-01-01

    Full Text Available The article discusses the processes of concentration taking place in retail in Poland. In spite of strong concentration processes, which took place after 2000, Poland still remains a country of dispersed retail structure. In the nearest years we can expect capital concentration (mainly takeovers in modern trade and contract concentration (for example, merchants’ societies in traditional trade.

  11. Part-time labour in retailing

    NARCIS (Netherlands)

    A.R. Thurik (Roy); N. van der Wijst (Nico)

    1984-01-01

    textabstractRetailers have to deal with a fluctuating demand for labor. The use of part-time employees is one of their instruments to cope with these fluctuations. This article gives theoretical considerations regarding the use of part-time labor in the retail trade and empirical evidence regarding

  12. 76 FR 41676 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-07-15

    ... with persons who are not ``eligible contract participants'' (commonly referred to as ``retail forex... temporary Rule 15b12-1T to allow a registered broker-dealer to engage in a retail forex business until July... forex transactions. DATES: Effective Date: Rule 15b12-1T is effective on July 15, 2011 and will remain...

  13. 77 FR 62177 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2012-10-12

    ... \\5\\ (a retail foreign exchange (forex) rule). Transactions described in section 2(c)(2)(B)(i)(I...'s retail forex rule must treat similarly all such futures and options and all agreements, contracts... forex rules must prescribe appropriate requirements with respect to disclosure, recordkeeping, capital...

  14. 47 CFR 301.6 - Retailer participation.

    Science.gov (United States)

    2010-10-01

    ... responsible for checking consumer or household eligibility but shall report to NTIA suspicious patterns of customer behavior. (4) Use commercially reasonable methods to order and manage inventory to meet customer... requires the retailers to self certify that they: (A) Have been engaged in the consumer electronics retail...

  15. Documentation of the Retail Price Model

    Science.gov (United States)

    The Retail Price Model (RPM) provides a first‐order estimate of average retail electricity prices using information from the EPA Base Case v.5.13 Base Case or other scenarios for each of the 64 Integrated Planing Model (IPM) regions.

  16. Electronic Commerce and Retail Channel Substitution

    NARCIS (Netherlands)

    M.C.W. Janssen (Maarten); R. van der Noll

    2002-01-01

    textabstractWe analyze a market where firms compete in a conventional and an electronic retail channel. Consumers easily compare prices online, but some incur purchase uncertainties on the online channel. We investigate the market shares of the two retail channels and the prices that are charged. We

  17. Social media: a new frontier for retailers?

    NARCIS (Netherlands)

    Constantinides, Efthymios; Lorenzo Romero, Carlota; Gomez Boria, Miguel A.; Swoboda, B.; Morschett, D; Rudolph, T.; Schnedlitz, P.; Schramm-Klein, H

    2008-01-01

    During the last two decades the retailing industry is finding itself in a state of constant evolution and transformation. Globalization, mergers and acquisitions, and technological developments have drastically changed the retailing landscape. The explosive growth of the Internet has been one of the

  18. Labour costs and queueing theory in retailing

    NARCIS (Netherlands)

    J.B.G. Frenk (Hans); A.R. Thurik (Roy); C.A. Bout

    1991-01-01

    textabstractIn this paper approximation results for the M/G/s queueing model are used to derive an empirically verified shop type dependent non-homogeneous relation between labour volume and sales in retail trade. Moreover, we formulate the retailer's labour management as a formal minimization

  19. Developing Strategic Planning for the Retail Market.

    Science.gov (United States)

    Greenawalt, Richard A.

    1983-01-01

    Retailers need a strategic plan that will enable them to adapt to changing trends and work with new ideas. Questions retailers should ask to shape the strategic plan and generic strategies--overall cost leadership, differentiation, and marketing to a particular group or offering a special service--are discussed. (SR)

  20. Innovation in Downstream Fashion Retail Networks

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    While product marketers and brand owners struggle to make new products, manufacturing processes and inbound logistics, innovation taking place in retail networks is often overlooked. Networks in retailing are comprised by varieties of single- and multi-brand stores, chains and departments stores...

  1. Simulating Retail Banking for Banking Students

    Science.gov (United States)

    Supramaniam, Mahadevan; Shanmugam, Bala

    2009-01-01

    The purpose of this study was to examine the implementation flow and development of retail bank management simulation based training system which could provide a comprehensive knowledge about the operations and management of banks for the banking students. The prototype of a Retail banking simulation based training system was developed based on…

  2. Competition in the retail gasoline industry

    Science.gov (United States)

    Brewer, Jedidiah

    2007-05-01

    This dissertation examines competition in the retail gasoline industry. The first chapter highlights the importance of gasoline in modern society, introduces my work, and places it in the context of the existing academic literature. The second chapter details the institutional structure and profitability of the industry. The vast majority of retail gasoline stations are not directly owned and operated by major oil companies. Instead, most stations are set up under other contractual relationships: lessee-dealer, open-dealer, jobber-owned-and-operated, and independent. Gasoline retailers make relatively low profits, as is the case in many other retail industries, and are substantially less profitable than major oil companies. Gas stations also make less money when retail prices are climbing than when they are falling. As prices rise, total station profits are near zero or negative. When retail prices are constant or falling, retailers can make positive profits. The third chapter describes the entry of big-box stores into the retail gasoline industry over the last decade. The growth of such large retailers, in all markets, has led to a great deal of controversy as smaller competitors with long-term ties to the local community have become less common. I estimate the price impact that big-box stores have on traditional gasoline retailers using cross-sectional data in two geographically diverse cities. I also examine changes in pricing following the entry of The Home Depot into a local retail gasoline market. The results show that big-box stores place statistically and economically significant downward pressure on the prices of nearby gas stations, offering a measure of the impact of the entry of a big-box store. Chapter 4 examines the nature of price competition in markets where some competing retailers sell the same brand. The price effect of having more retailers selling the same brand is theoretically unclear. High brand diversity could give individual retailers

  3. Reducing the Density and Number of Tobacco Retailers: Policy Solutions and Legal Issues.

    Science.gov (United States)

    Ackerman, Amy; Etow, Alexis; Bartel, Sara; Ribisl, Kurt M

    2017-02-01

    Because higher density of tobacco retailers is associated with greater tobacco use, U.S. communities seek ways to reduce the density and number of tobacco retailers. This approach can reduce the concentration of tobacco retailers in poorer communities, limit youth exposure to tobacco advertising, and prevent misleading associations between tobacco and health messaging. Communities can reduce the density and number of tobacco retailers by imposing minimum distance requirements between existing retailers, capping the number of retailers in a given geographic area, establishing a maximum number of retailers proportional to population size, and prohibiting sales at certain types of establishments, such as pharmacies, or within a certain distance of locations serving youth. Local governments use direct regulation, licensing, or zoning laws to enact these changes. We analyze each approach under U.S. constitutional law to assist communities in selecting and implementing one or more of these methods. There are few published legal opinions that address these strategies in the context of tobacco control. But potential constitutional challenges include violations of the Takings Clause of the Fifth Amendment, which protects property owners from onerous government regulations, and under the Fourteenth Amendment's Equal Protection and Due Process Clauses, which protect business owners from arbitrary or unreasonable regulations that do not further a legitimate government interest. Because there is an evidentiary basis linking the density of tobacco retailers to smoking rates in a community, courts are likely to reject constitutional challenges to carefully crafted laws that reduce the number of tobacco retailers. Our review of the relevant constitutional issues confirms that local governments have the authority to utilize laws and policies to reduce the density and number of tobacco retailers in their communities, given existing public health data. The analysis guides policy

  4. Research and Development Costs in Retail Trade

    Directory of Open Access Journals (Sweden)

    Radojko LUKIC

    2016-12-01

    Full Text Available Research and development expenses are crucial business performance factors for all enterprises, including trading companies. The size and structure of these expenses depend largely on the nature of a company’s activities. Due to such importance and specificity, the research focus of this article is on R&D expenses in trading companies with particular emphasis on retail companies. Their share in the sales revenue of trading companies is increasingly important and determined by many factors, such as innovation, size, location, product categories, and others. Due to varying intensity of influence of these and other factors, research and development expenses in commercial companies differ among countries, trade types (wholesale, retail, wholesale and retail, retail formats (store types and product categories. Understanding the factors of these differences is important for efficient management of research and development costs in trade, particularly retail companies. They are the focus of research in this work.

  5. Food Waste Avoidance Actions in Food Retailing

    DEFF Research Database (Denmark)

    Kulikovskaja, Viktorija; Aschemann-Witzel, Jessica

    2017-01-01

    Food waste occurs throughout the entire food supply chain, from production to consumption of food in households. Retailers are in a unique position to contribute to food waste avoidance, not only by minimizing the amount of waste in their distribution channels but also by influencing consumer...... attitudes and behaviors. This explorative study aims to identify which food waste avoidance actions are conducted by retailers in Denmark, to which extent, and how they vary across food categories and supermarket chain. Based on an analysis of secondary and empirical data collected via observations...... at retail stores, the authors identify 22 food waste avoidance actions in Danish retail. The results provide new insights into food waste avoidance in retail. Based on the findings, suggestions for further research directions are developed that should serve to identify the most efficient customer targeted...

  6. Corporate Social Responsibility and UK Retailers

    Directory of Open Access Journals (Sweden)

    Peter Jones

    2007-12-01

    Full Text Available This paper offers a preliminary examination of the Corporate Social Responsibility (CSR commitments and agendas being addressed and reported by the UK‟s leading retailers. The paper begins with a short discussion of the characteristics and origins of CSR and of the current structure of retailing in the UK. This is followed by an illustrative examination of the CSR issues publicly reported by the UK‟s top ten country of origin retailers and the paper draws its empirical material from the CSR reports posted on the World Wide Web by these retailers. The findings reveal that the UK‟s top ten retailers are addressing and reporting on four sets of CSR themes namely those relating to the environment; the marketplace; the workplace and the community. The paper concludes with a discussion of a number of general issues relating to these themes.

  7. Retail Executives’ Professional Learning Contents

    Directory of Open Access Journals (Sweden)

    Eduardo de Aquino Lucena

    2014-05-01

    Full Text Available The research question that is addressed in this article is the following: what do the executives from small retailing firms learn in their work environment? The theoretical framework of the study is based on texts from the field of learning. This is a qualitative investigation. Ten interviews with clothing retail executives were carried out. Later, these interviews were transcribed and analyzed. In the data analysis stage, two categories were established in response to the research question. Regarding the first, respondents perceived difficulties (problems in their work environments and obtained specific information and knowledge in order to deal with these situations. So as to overcome different professional difficulties, respondents learned about colors and types of fabric and about certain manufacturing process aspects referring to the clothing sold by their companies. They also declared to have learned about their companies’ suppliers and about certain issues referring to sales, and to the accounting and the financial management of their companies. The second category refers to a change in some of the respondents’ habits. This learning content refers to predispositions to respond and/ or act in situations at their work environments. Respondents reported having changed the way they related to other people. They emphasized that they had learned how to interact with the employees at their stores and how to carry out supervision. Differently from other studies, we found that the retailers’ learning (individual learning affected their companies’ learning (organizational learning through changes in certain aspects of the analyzed companies’ organizational structures.

  8. 29 CFR 1910.215 - Abrasive wheel machinery.

    Science.gov (United States)

    2010-07-01

    ... be securely fastened to the spindle and the bearing surface shall run true. When more than one wheel... 29 Labor 5 2010-07-01 2010-07-01 false Abrasive wheel machinery. 1910.215 Section 1910.215 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.215 Abrasive wheel machinery. (a...

  9. 49 CFR 229.75 - Wheels and tire defects.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Wheels and tire defects. 229.75 Section 229.75....75 Wheels and tire defects. Wheels and tires may not have any of the following conditions: (a) A... two adjoining spots that are each two or more inches in length. (e) A seam running lengthwise that is...

  10. Unbundling the retail gas market: Current activities and guidance for serving residential and small customers

    Energy Technology Data Exchange (ETDEWEB)

    Costello, K.W.; Lemon, J.R.

    1996-05-01

    The restructuring of retail gas services has followed a typical pattern for previously heavily regulated industries: large customers are initially given rights to purchase unbundled services from different entities, with the same rights dispersed over time to smaller customers. For about ten years now industrial customers in most states have been able to {open_quotes}play the market{close_quotes}. Since the passage of the Federal Energy Regulatory Commission (FERC) Order 636 in 1992, interest has centered on expanding service unbundling to small retail customers, including residential customers. Importantly, the Order prohibited pipelines from providing bundled sales service. This is not surprising - in the telecommunications industry, for example, the unbundling of wholesale services was a strong stimulant for developing competition in the local exchange market. The push for small-customer service unbundling has derived from the basic but politically attractive idea that all retail customers should directly benefit from competitive forces in the natural gas industry. When one looks at the movement of prices since 1985, it is easy to see that large retail customers have enjoyed more favorable prices than other retail customers. For example, over the period 1985 to 1994 gas prices to industrial customers and electric utilities fell around 23 percent and 36 percent, respectively. In comparison, gas prices to residential customers increased by around 5 percent while gas prices to commercial customers decreased slightly by about 1 percent. This report examines various aspects of unbundling to small retail gas customers, with special emphasis on residential customers.

  11. Unbundling the retail gas market: Current activities and guidance for serving residential and small customers

    International Nuclear Information System (INIS)

    Costello, K.W.; Lemon, J.R.

    1996-05-01

    The restructuring of retail gas services has followed a typical pattern for previously heavily regulated industries: large customers are initially given rights to purchase unbundled services from different entities, with the same rights dispersed over time to smaller customers. For about ten years now industrial customers in most states have been able to open-quotes play the marketclose quotes. Since the passage of the Federal Energy Regulatory Commission (FERC) Order 636 in 1992, interest has centered on expanding service unbundling to small retail customers, including residential customers. Importantly, the Order prohibited pipelines from providing bundled sales service. This is not surprising - in the telecommunications industry, for example, the unbundling of wholesale services was a strong stimulant for developing competition in the local exchange market. The push for small-customer service unbundling has derived from the basic but politically attractive idea that all retail customers should directly benefit from competitive forces in the natural gas industry. When one looks at the movement of prices since 1985, it is easy to see that large retail customers have enjoyed more favorable prices than other retail customers. For example, over the period 1985 to 1994 gas prices to industrial customers and electric utilities fell around 23 percent and 36 percent, respectively. In comparison, gas prices to residential customers increased by around 5 percent while gas prices to commercial customers decreased slightly by about 1 percent. This report examines various aspects of unbundling to small retail gas customers, with special emphasis on residential customers

  12. How satisfied are hospital systems with their ownership of retail clinics?

    Science.gov (United States)

    Kaissi, Amer; Charland, Thomas A

    2013-01-01

    Retail clinics--while innovative--can no longer be considered a new model of healthcare delivery, as an increasing number of hospitals and health systems now own them. The purpose of this article is to explore the extent to which hospital systems are satisfied with their ownership of retail clinics. In terms of operational challenges, respondents to our survey, administered to representatives from 19 health systems, were relatively satisfied with clinic staffing and their relationship with the retailers regarding lease terms, store locations, and shopper demographics. They expressed mostly neutral levels of satisfaction with regulations and laws related to retail clinics and low satisfaction with insurance reimbursement and clinics' seasonal patterns. The two areas that received the lowest respondent satisfaction ratings were patient volume and response to marketing initiatives. When asked to share their perceptions of their organization's satisfaction with various strategic aspects of retail clinic ownership, respondents revealed that the clinics were achieving several important strategic goals, such as improved access, increased referrals, defense against competitors, and increased brand exposure. They indicated overall dissatisfaction with profitability and cost-reduction outcomes. We conclude that serious operational challenges and strategic threats must be overcome if retail clinics are to be a successful service line for hospitals and health systems.

  13. Energy to the masses : a blueprint for competition in Alberta's retail energy markets

    International Nuclear Information System (INIS)

    Topp, L.

    2004-01-01

    This paper presents a framework for competition in Alberta's retail energy market and its influence on Direct Energy Marketing Limited . The main factors for successful retail energy competition were identified as being a level playing field for all retailers; a stable and committed regulatory framework; customer education; brand trust and visibility; regulated pricing which reflects market conditions; customer service and billing; unrestricted customer choice; and, conformity between electricity and gas markets. Direct Energy is a wholly owned subsidiary of British-based Centrica plc, one of the top 30 companies in the United Kingdom in terms of market capitalization. It was created during Britain's regulatory reform of the energy industry and operates through 4 retail brand units. Centrica entered the North American market in 2000 when it acquired Direct Energy Marketing Limited which supplies energy and services to half of the households in Ontario. Direct Energy is expected to increase its customer base with the pending closure of ATCO Gas and ATCO Electric in Alberta, making it Canada's largest provider of retail energy services. In a competitive energy market, retailers can offer a wider range of products than energy alone. Cost-to services can be reduced by offering services such as heating, ventilation and air conditioning

  14. Managing Food Allergens in the U.K. Retail Supply Chain.

    Science.gov (United States)

    Walker, Michael J; Gowland, M Hazel; Points, John

    2018-01-01

    The U.K. food and grocery market is highly significant financially and dominated by 10 retailers within a regulated and extremely economically competitive environment. We summarize the approach of U.K. retailers to allergen risk assessment (RA) and risk management (RM) within the U.K. legal framework and explore public visibility of retailers' allergen policies. RA and RM of allergens appear effective in curtailing retail-triggered severe food allergy reactions. However, allergen recalls remain high, precautionary allergen labeling (PAL) remains an area of confusion, and there is no consistent Web-based provision of information for consumers who have allergies. Resolution of PAL awaits an agreed-on threshold framework, but a key challenge is to engage with patients and gain their trust rather than thrust education at them. It would be helpful for retailers to publish their allergen RA and RM policies. A target should be agreed on between government and retailers for a reduction in the proliferation of PAL wording variants by a given date within the next 3 years. A further hurdle is potentially flawed allergen analysis-development of reference methods and reference materials are acknowledged needs. Laboratories should report allergen results in an informative manner, communicating uncertainty and caveats. Ideally a laboratory representative would be included on any incident control team. Efforts must continue to standardize preparedness for protecting and defending food and drink from deliberate attack.

  15. Circulating levels of endocannabinoids respond acutely to voluntary exercise, are altered in mice selectively bred for high voluntary wheel running, and differ between the sexes.

    Science.gov (United States)

    Thompson, Zoe; Argueta, Donovan; Garland, Theodore; DiPatrizio, Nicholas

    2017-03-01

    The endocannabinoid system serves many physiological roles, including in the regulation of energy balance, food reward, and voluntary locomotion. Signaling at the cannabinoid type 1 receptor has been specifically implicated in motivation for rodent voluntary exercise on wheels. We studied four replicate lines of high runner (HR) mice that have been selectively bred for 81 generations based on average number of wheel revolutions on days five and six of a six-day period of wheel access. Four additional replicate lines are bred without regard to wheel running, and serve as controls (C) for random genetic effects that may cause divergence among lines. On average, mice from HR lines voluntarily run on wheels three times more than C mice on a daily basis. We tested the general hypothesis that circulating levels of endocannabinoids (i.e., 2-arachidonoylglycerol [2-AG] and anandamide [AEA]) differ between HR and C mice in a sex-specific manner. Fifty male and 50 female mice were allowed access to wheels for six days, while another 50 males and 50 females were kept without access to wheels (half HR, half C for all groups). Blood was collected by cardiac puncture during the time of peak running on the sixth night of wheel access or no wheel access, and later analyzed for 2-AG and AEA content by ultra-performance liquid chromatography coupled to tandem mass spectrometry. We observed a significant three-way interaction among sex, linetype, and wheel access for 2-AG concentrations, with females generally having lower levels than males and wheel access lowering 2-AG levels in some but not all subgroups. The number of wheel revolutions in the minutes or hours immediately prior to sampling did not quantitatively predict plasma 2-AG levels within groups. We also observed a trend for a linetype-by-wheel access interaction for AEA levels, with wheel access lowering plasma concentrations of AEA in HR mice, while raising them in C mice. In addition, females tended to have higher AEA

  16. Rolling Friction on a Wheeled Laboratory Cart

    Science.gov (United States)

    Mungan, Carl E.

    2012-01-01

    A simple model is developed that predicts the coefficient of rolling friction for an undriven laboratory cart on a track that is approximately independent of the mass loaded onto the cart and of the angle of inclination of the track. The model includes both deformation of the wheels/track and frictional torque at the axles/bearings. The concept of…

  17. Vegetation response to wagon wheel camp layouts.

    African Journals Online (AJOL)

    Wagon wheel camp layouts have been favoured, in some quarters, for rotational grazing due to the economy and convenience of having the camps radially arranged around central facilities. A possible disadvantage of such layouts is the tendency for over-grazing near the hub and under-grazing at the extremities.

  18. Examination of a failed fifth wheel coupling

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1998-03-01

    Full Text Available Examination of a fifth wheel coupling which had failed in service showed that it had been modified and that the operating handle had been moved from its original design position. This modification completely eliminated the safety device designed...

  19. Omnidirectional Wheel-Legged Hybrid Mobile Robot

    Directory of Open Access Journals (Sweden)

    István Vilikó

    2015-06-01

    Full Text Available The purpose of developing hybrid locomotion systems is to merge the advantages and to eliminate the disadvantages of different type of locomotion. The proposed solution combines wheeled and legged locomotion methods. This paper presents the mechatronic design approach and the development stages of the prototype.

  20. Investigating Functions with a Ferris Wheel

    Science.gov (United States)

    Johnson, Heather Lynn; Hornbein, Peter; Azeem, Sumbal

    2016-01-01

    The authors provide a dynamic Ferris wheel computer activity that teachers can use as an instructional tool to help students investigate functions. They use a student's work to illustrate how students can use relationships between quantities to further their thinking about functions.

  1. Experiments on a Tail-wheel Shimmy

    Science.gov (United States)

    Harling, R; Dietz, O

    1954-01-01

    Model tests on the "running belt" and tests with a full-scale tail wheel were made on a rotating drum as well as on a runway in order to investigate the causes of the undesirable shimmy phenomena frequently occurring on airplane tail wheels, and the means of avoiding them. The small model (scale 1:10) permitted simulation of the mass, moments of inertia, and fuselage stiffness of the airplane and determination of their influence on the shimmy, whereas by means of the larger model with pneumatic tires (scale 1:2) more accurate investigations were made on the tail wheel itself. The results of drum and road tests show good agreement with one another and with model values. Detailed investigations were made regarding the dependence of the shimmy tendency on trail, rolling speed, load, size of tires, ground friction,and inclination of the swivel axis; furthermore, regarding the influence of devices with restoring effect on the tail wheel, and the friction damping required for prevention of shimmy. Finally observations from slow-motion pictures are reported and conclusions drawn concerning the influence of tire deformation.

  2. The physics of wheel-rail stability

    Science.gov (United States)

    Tan, B. T. G.

    2018-05-01

    This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure.

  3. 49 CFR 215.103 - Defective wheel.

    Science.gov (United States)

    2010-10-01

    ... of the rim; or, (i) A wheel on the car has been welded unless the car is being moved for repair in... on the car shows evidence of being loose such as oil seepage on the back hub or back plate; (h) A...

  4. Steady state modeling of desiccant wheels

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Kærn, Martin Ryhl

    2014-01-01

    Desiccant wheels are rotary desiccant dehumidifiers used in air conditioning and drying applications. The modeling of simultaneous heat and mass transfer in these components is crucial for estimating their performances, as well as for simulating and optimizing their implementation in complete...

  5. Performance Evaluation of Abrasive Grinding Wheel Formulated ...

    African Journals Online (AJOL)

    This paper presents a study on the formulation and manufacture of abrasive grinding wheel using locally formulated silicon carbide abrasive grains. Six local raw material substitutes were identified through pilot study and with the initial mix of the identified materials, a systematic search for an optimal formulation of silicon ...

  6. 2009 Tactical Wheeled Vehicles Conference (TWV)

    Science.gov (United States)

    2009-02-03

    fields. 5 ... Spent $265.2 Million in Reset of TWVs … or larger than the entire 2007 revenue of the Los Angeles Dodgers . ... Spent $265.2 Million in...Reset of T Vs or larger than the entire 2007 revenue of the Los Angeles Dodgers . ... Maintains over 29,000 Tactical Wheeled Vehicles in theater … or

  7. The Physics of Wheel-Rail Stability

    Science.gov (United States)

    Tan, B. T. G.

    2018-01-01

    This article discusses, at a simple level, the dynamics of the wheel-rail interface, which is fundamental to the stability of rail vehicles. The physics underlying this topic deserves to be better known by physicists and physics students, as it underpins such an important part of our technological infrastructure

  8. Reinventing the Wheel: The Economic Benefits of Wheeled Transportation in Early British Colonial West Africa

    OpenAIRE

    Isaías N. Chaves; Stanley L. Engerman; James A. Robinson

    2013-01-01

    One of the great puzzles of Sub-Saharan African economic history is that wheeled transportation was barely used prior to the colonial period. Instead, head porterage was the main method of transportation. The consensus among historians is that this was a rational adaption to the underlying conditions and factor endowments. In this paper we undertake the first systematic investigation of the relative costs of the different forms of wheeled transportation in Africa. We focus on calculating the ...

  9. Customer retention: maintaining the competitive edge in the retail market

    Energy Technology Data Exchange (ETDEWEB)

    Wright, T. [CitiPower Ltd., Melbourne, VIC (Australia)

    1997-09-01

    The current market environment in the electricity industry is one of changing regulations with many of the rules being developed. There is a great deal of customer confusion and uncertainty with some customers unaware of their contestable status and many are insecure about mixing retail and distribution supplies. This paper discusses customer retention and maintaining the competitive edge in the retail market. It draws on some conclusions from a survey released by the Australian Chamber of Manufacturers entitled `Customer feedback on Victoria`s competitive electricity market`. An overview is presented of the retail market in Australia which is one of very strong price-based competition, with as yet little differentiation. A process is described for retaining customers which involves asking the customer what he/she wants in a language which they understand. The best way to determine customer needs is through a combination of internal and external sources. Enhancing customer loyalty and differentiating and marketing the product are also discussed. As the market matures, customer retention and satisfaction will be based on value added services at a reasonable cost. (author). 6 figs.

  10. A dynamic wheel-rail impact analysis of railway track under wheel flat by finite element analysis

    Science.gov (United States)

    Bian, Jian; Gu, Yuantong; Murray, Martin Howard

    2013-06-01

    Wheel-rail interaction is one of the most important research topics in railway engineering. It involves track impact response, track vibration and track safety. Track structure failures caused by wheel-rail impact forces can lead to significant economic loss for track owners through damage to rails and to the sleepers beneath. Wheel-rail impact forces occur because of imperfections in the wheels or rails such as wheel flats, irregular wheel profiles, rail corrugations and differences in the heights of rails connected at a welded joint. A wheel flat can cause a large dynamic impact force as well as a forced vibration with a high frequency, which can cause damage to the track structure. In the present work, a three-dimensional finite element (FE) model for the impact analysis induced by the wheel flat is developed by the use of the FE analysis (FEA) software package ANSYS and validated by another validated simulation. The effect of wheel flats on impact forces is thoroughly investigated. It is found that the presence of a wheel flat will significantly increase the dynamic impact force on both rail and sleeper. The impact force will monotonically increase with the size of wheel flats. The relationships between the impact force and the wheel flat size are explored from this FEA and they are important for track engineers to improve their understanding of the design and maintenance of the track system.

  11. Defining Toll Fee of Wheeling Renewable with Reference to a Gas Pipeline in Indonesia

    Science.gov (United States)

    Hakim, Amrullah

    2017-07-01

    Indonesia has a huge number of renewable energy sources (RE) however; the utilization of these is currently very low. The main challenge of power production is its alignment with consumption levels; supply should equal demand at all times. There is a strong initiative from corporations with high energy demand, compared to other sectors, to apply a renewable portfolio standard for their energy input, e.g. 15% of their energy consumption requirement must come from a renewable energy source. To support this initiative, the utilization of power wheeling will help large factories on industrial estates to source firm and steady renewables from remote sites. The wheeling renewable via PLN’s transmission line has been regulated under the Ministry Decree in 2015 however; the tariff or toll fee has not yet been defined. The potential project to apply wheeling renewable will obtain power supply from a geothermal power plant, with power demand from the scattered factories under one company. This is the concept driving the application of power wheeling in the effort to push the growth of renewable energy in Indonesia. Given that the capacity of PLN’s transmission line are normally large and less congested compared to distribution line, the wheeling renewable can accommodate the scattered factories locations which then results in the cheaper toll fee of the wheeling renewable. Defining the best toll fee is the main topic of this paper with comparison of the toll fee of the gas pipeline infrastructure in Indonesia, so that it can be applied massively to achieve COP21’s commitment.

  12. Design of Wheeled Mobile Robot with Tri-Star Wheel as Rescue Robot

    Directory of Open Access Journals (Sweden)

    Rafiuddin Syam

    2014-10-01

    Full Text Available This study aims to design, and analyze a mobile robot that can handle some of the obstacles, they are uneven surfaces, slopes, can also climb stairs. WMR in this study is Tristar wheel that is containing three wheels for each set. On average surface only two wheels in contact with the surface, if there is an uneven surface or obstacle then the third wheel will rotate with the rotation center of the wheel in contact with the leading obstacle then only one wheel in contact with the surface. This study uses the C language program. Furthermore, the minimum thrust to be generated torque of the motor and transmission is 9.56 kg. The results obtained by calculation and analysis of DC motors used must have a torque greater than 14.67 kg.cm. Minimum thrust to be generated motor torque and the transmission is 9.56 kg. The experimental results give good results for robot to moving forward, backward, turn left, turn right and climbing the stairs.

  13. French retail electricity and gas markets functioning - 2012-2013 report

    International Nuclear Information System (INIS)

    2014-01-01

    French retail electricity and gas markets are still progressively opening to competition. Competition dynamics, even if more limited on the electricity market, is changing in a favorable way. These changes reflect the development of more competitive market offers with respect to regulated sales tariffs in both energies, as well as a better knowledge of these markets by end-users. In this context of retail markets development, the Energy Regulatory Commission (CRE) pays more and more attention to the monitoring of actors behaviour, in particular in the domain of price and offer transparency. This activity is going to become reinforced in the future with the scheduled disappearance of regulated sales tariffs. This report presents the situation of the French retail electricity and gas markets by December 31, 2012 (supplies, offers and prices), with a comparison with other European countries (Germany, UK, Belgium)

  14. Observational study of food safety practices in retail deli departments.

    Science.gov (United States)

    Lubran, M B; Pouillot, R; Bohm, S; Calvey, E M; Meng, J; Dennis, S

    2010-10-01

    In order to improve the safety of refrigerated ready-to-eat food products prepared at retail deli departments, a better understanding of current practices in these establishments is needed. Food employees in deli departments at six chain and three independent retail establishments in Maryland and Virginia were observed, using notational analysis, as they prepared deli products for sale. The frequency of contact with objects and deli products before sale, hand washing and glove changing during preparation, and equipment, utensil, and surface cleaning and sanitizing was determined. Compliance with the U.S. Food and Drug Administration's 2005 model Food Code recommendations, which must be adopted by the individual state and local jurisdictions that are responsible for directly regulating retail establishments, was also assessed. Observations indicated there were a large number of actions for which hand washing was recommended at independent and chain stores (273 recommended of 1,098 total actions and 439 recommended of 3,073 total actions, respectively). Moreover, 67% (295 of 439) of the actions for which hand washing was recommended at the chain stores and 86% (235 of 273) of those at the independent stores resulted from employees touching non-food contact surfaces prior to handling ready-to-eat food. Compliance with hand washing recommendations was generally low and varied depending on store type with independent stores exhibiting lower compliance than chain stores (5 instances of compliance for 273 recommended actions and 73 instances of compliance for 439 recommended actions, respectively). Potential risk mitigation measures that may reduce the frequency of hand washing actions needed during ready-to-eat food preparation in retail deli departments are discussed. More research is needed to determine the impact of such measures on food safety.

  15. Kinematics and dynamics modelling of a mecanum wheeled mobile platform

    CSIR Research Space (South Africa)

    Tlale, NS

    2008-12-01

    Full Text Available analysis for mecanum wheeled mobile platform same time during the operation of the mobile platform, a maximum of eighty-one combinations of wheels (four wheels: 1,2, 3 and 4) and directions of rotational velocity of wheels (three directions of rotation... = I ’ (15) where ai is a constant depending on the wheel number and ai = -1 for i = 1 and 4, and ai = 1 for i = 2 and 3, T is the torque developed on the vehicle that changes the posture of the vehicle, I is the mass inertia of the vehicle...

  16. Study on the Attitude Control of Spacecraft Using Reaction Wheels

    Directory of Open Access Journals (Sweden)

    Ju-Young Du

    1998-06-01

    Full Text Available Attitude determination and control of satellite is important component which determines the accomplish satellite missions. In this study, attitude control using reaction wheels and momentum dumping of wheels are considered. Attitude control law is designed by Sliding control and LQR. Attitude maneuver control law is obtained by Shooting method. Wheels momentum dumping control law is designed by Bang-Bang control. Four reaction wheels are configurated for minimized the electric power consumption. Wheels control torque and magnetic moment of magnetic torquer are limited.

  17. Latent effectiveness of desiccant wheel: A silica gels- water system

    International Nuclear Information System (INIS)

    Rabah, A. A.; Mohamed, S. A.

    2009-01-01

    A latent heat effectiveness model in term of dimensionless groups? =f (NTU, m * ,Crm * ) for energy wheel has been analytically derived. The energy wheel is divided into humidification and dehumidification sections. For each section macroscopic mass differential equations for gas and the matrix were applied. In this process local latent effectiveness (? c ,? h ) for the humidification and dehumidification section of the wheel were obtained. The Latent effectiveness of the wheel is then derived form local effectiveness [? =f (? c ,? h)]. The model is compared with the existing experimental investigation and manufacturer data for energy wheel. More than 90% of the experimental data within a confidence limit of 95%. (Author)

  18. Indian Organized Retail Sector: Impediments and Opportunities

    Directory of Open Access Journals (Sweden)

    Dharmendra Mehta

    2012-11-01

    Full Text Available The winds of globalization have yielded rich dividends to the social and economic growth of India. The boom in Indian market has widened the horizons for the customers to be selective while purchasing any product. On the other hand, the sellers are more proactive in facilitating their customers’ quality services and cater to their growing demands. There is a paradigm shift in the customer’s perception and purchasing tendencies. The traditional shops and shopkeepers are now being slowly but gradually replaced by big/mini retail stores (shopping malls and retailers (top corporate houses. Indian consumers are evolving and accepting modern retail formats. In the context of Indian retail sectors, Big Bazaar, More, Pantaloon Retail India Ltd, ITC's e-choupal Reliance Retail Ltd, Vishal Mega Mart, Titan Industries, Archies, Bata India Ltd etc. are dominating the scene and have a wide spread network to execute their operation. The present paper is an attempt to study impediment and opportunities related to organized retailing in India.

  19. Adolescence and the path to maturity in global retail

    NARCIS (Netherlands)

    Bronnenberg, Bart; Ellickson, Paul B.

    2015-01-01

    The paper discusses retail modernization in the developed and developing world using data from the grocery trade and internet retailing across a global set of nations. Retail modernization leads to more variety, lower prices, and more time savings for consumers relative to a traditional retailing

  20. 76 FR 19741 - Exemption for Retail Store Operations

    Science.gov (United States)

    2011-04-08

    ... the types of operations traditionally and usually conducted at retail stores and restaurants when those operations are conducted at any retail store or restaurant or similar retail-type establishment... Retail Store Operations AGENCY: Food Safety and Inspection Service, USDA. [[Page 19742

  1. Retailing policies for generic medicines.

    Science.gov (United States)

    Narciso, Susana

    2005-06-01

    As there is general disagreement about the way generic medicines should be commercialized, two retailing policies are analyzed, taking into account their effects on the welfare of patients, government, pharmacies and physicians. In the first policy scenario, pharmacies are allowed to substitute generic medicines for branded ones, while in the second, substitution is forbidden. In both cases a pharmacies association is allowed to have a share in the production of generic medicines. The model predicts that under some conditions patients may prefer substitution by pharmacies but when doctors' decisions are binding, they are never "excessively bad". However, the policy choice belongs to the government, which prefers to allow for substitution more often than patients would like.

  2. Strategi Periklanan pada Bisnis Retail

    Directory of Open Access Journals (Sweden)

    Veny Ari Sejati

    2015-01-01

    Full Text Available This research aims to analyze the benefits of advertising strategy of Poundland. The method used is a qualitative approach because its ability to produce an in-depth description to obtain an authentic understanding of the experience of the people concerned. The study found that Poundland conducted intensive advertising by utilizing important moments such as Halloween, Christmas, Mother Day, etc using Internet media, social media, and e-mail sent 1-2 times per week. Poundland also employs other media such as word of mouth spread among students. Catalog is also used as the print media to reach the consumers. Poundland uses communication technology and take advantage of important moments for advertising strategy. This description can be a reference for retail businesses in Indonesia to pay attention to important events in Indonesia such as national moments and utilizing non-traditional communication technologies as an advertising strategy.

  3. The Running Wheel Enhances Food Anticipatory Activity: An Exploratory Study.

    Science.gov (United States)

    Flôres, Danilo E F L; Bettilyon, Crystal N; Jia, Lori; Yamazaki, Shin

    2016-01-01

    Rodents anticipate rewarding stimuli such as daily meals, mates, and stimulant drugs. When a single meal is provided daily at a fixed time of day, an increase in activity, known as food anticipatory activity (FAA), occurs several hours before feeding time. The factors affecting the expression of FAA have not been well-studied. Understanding these factors may provide clues to the undiscovered anatomical substrates of food entrainment. In this study we determined whether wheel-running activity, which is also rewarding to rodents, modulated the robustness of FAA. We found that access to a freely rotating wheel enhanced the robustness of FAA. This enhancement was lost when the wheel was removed. In addition, while prior exposure to a running wheel alone did not enhance FAA, the presence of a locked wheel did enhance FAA as long as mice had previously run in the wheel. Together, these data suggest that FAA, like wheel-running activity, is influenced by reward signaling.

  4. Gaining access to the retail customer

    International Nuclear Information System (INIS)

    Wills, D.

    1998-01-01

    The challenges facing Ontario's municipal electric utilities (MEUs) in the new competitive electricity marketplace are discussed. Various roles that MEUs are in a good position to perform have been suggested. Among them are: to represent consumer interests, to serve as a source of unbiased information to consumers, to provide meter ownership, meter reading, data management, billing and collection services on behalf of customers and all competitors. This author considers MEUs as assets to be leveraged and not liabilities to be fixed. The majority of retail customers in Ontario have been well served by their MEUs in the past and the performance-based regulation required by Bill 35 will guarantee that MEUs continue to be accountable to consumers and competitors for prices and standards of the services they receive. For this reason, it seems excessive to compare publicly-owned MEUs with private gas companies and conclude that the rules should be the same. To be viable, MEUs should remain over 50 per cent municipally owned, and rather than limit their activities, they should be given operational and commercial freedom to benefit their consumers and their municipality

  5. Omni-channel Retail Information Systems

    DEFF Research Database (Denmark)

    Tambo, Torben

    2014-01-01

    key players in the industry of retailing (Wilson, 2012; Verizon, 2012) and covers the idea that anything can be sold anywhere with consistent marketing, reasonable efficiency of the supply chain channels and responsible customer service. This article aims at contributing to a characterisation...... and definition of omni-channel retail information systems (OCRIS) by using the information systems research tradition as a distinctive starting point (Treiblmaier and Strebinger, 2008; Avgerou, 2001; Parboteah et al., 2009). Omni-channel retailing has evolved since 2010 with the ultimate aim of aligning physical...

  6. Monitoring process hygiene in Serbian retail establishments

    Science.gov (United States)

    Vesković Moračanin, S.; Baltić, T.; Milojević, L.

    2017-09-01

    The present study was conducted to estimate the effectiveness of sanitary procedures on food contact surfaces and food handlers’ hands in Serbian retail establishments. For that purpose, a total of 970 samples from food contact surfaces and 525 samples from workers’ hands were microbiologically analyzed. Results of total aerobic plate count and total Enterobacteriaceae count showed that the implemented washing and disinfection procedures, as a part of HACCP plans, were not effective enough in most retail facilities. Constant and intensive education of employees on proper implementation of sanitation procedures are needed in order to ensure food safety in the retail market.

  7. Electricity and natural gas retail markets - Observatory 3. Quarter 2017 (Figures as at 30/09/2017)

    International Nuclear Information System (INIS)

    2017-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  8. Electricity and natural gas retail markets - Observatory 4. Quarter 2016 (Figures as at 31/12/2016)

    International Nuclear Information System (INIS)

    2016-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  9. Electricity and natural gas retail markets - Observatory 3. Quarter 2016 (Figures as at 30/09/2016)

    International Nuclear Information System (INIS)

    2016-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  10. Electricity and natural gas retail markets - Observatory 2. Quarter 2016 (Figures as at 30/06/2016)

    International Nuclear Information System (INIS)

    2016-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  11. Electricity and natural gas retail markets - Observatory 2. Quarter 2017 (Figures as at 30/06/2017)

    International Nuclear Information System (INIS)

    2017-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  12. Electricity and natural gas retail markets - Observatory 1. Quarter 2017 (Figures as at 31/03/2017)

    International Nuclear Information System (INIS)

    2017-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  13. Electricity and natural gas retail markets - Observatory 4. Quarter 2017 (Figures as at 31/12/2017)

    International Nuclear Information System (INIS)

    2017-01-01

    The retail markets Observatory aims to provide general monitoring indicators of electricity and natural gas retail markets in France. This Observatory is updated on a Quarterly basis and published on CRE's web site (www.cre.fr). The first part of the report summarises the highlights of the electricity market (situation, market shares, suppliers, sales, dynamic analysis, regulated prices). The natural gas market is detailed in the second part

  14. An Introduction to Retail Electricity Choice in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shengru [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-10-04

    Retail electricity choice in the United States allows end-use customers (including industrial, commercial, and residential customers) to buy electricity from competitive retail suppliers. This brochure offers an overview of retail electricity choice in the United States, and its impact on prices and renewable energy procurement. It concludes with three lessons learned from the U.S. retail market experience that may serve as a reference for other countries and regions taking steps towards retail electricity market liberalization.

  15. Wheel traffic effect on air-filled porosity and air permeability in a soil catena across the wheel rut

    DEFF Research Database (Denmark)

    Berisso, Feto Esimo; Schjønning, Per; Lamandé, Mathieu

    might induce different effects on soil physical properties. The objective of this study was to investigate the impact of vehicle traffic on soil physical properties and air permeability by systematic collection of samples in a transect running from the center to the outside of the wheel rut. A field...... catena running from center of the wheel rut to un wheeled part of the field ( 0, 20, 40, 50,60 and 400 cm horizontal distance). We measured water retention and air permeability (ka) at -30, -100 and -300 hPa matric potentials. At -100 hPa, we obtained consistently lower air filled under the wheel rut......The impact of wheel traffic on soil physical properties is usually quantified by randomly collecting soil cores at specific depths below the wheeled surface. However, modeling studies as well as few measurements indicated a non-uniform stress distribution in a catena across the wheel rut, which...

  16. Buying behaviour of Western European food retailers

    DEFF Research Database (Denmark)

    Skytte, Hans; Blunch, Niels Johan

    2005-01-01

    The aim of this study has been to analyze important aspects of buying behavior of food retailers, i.e., trade buyers' evaluation of product and vendor attributes, based on a number of background variables, when choosing a new supplier of an already well-known product category. The study encompassed...... the retailers' buying behavior for pork, fish and cheese products. By conducting a conjoint analysis in sixteen Western European countries (15 'old' EU Countries (except Luxemburg), and Norway, and Austria), it is demonstrated that the traditional four Ps are losing ground to some previously neglected...... attributes, and that it is possible to generalise retailers' buying behavior for different food products across countries, retail organizations, and buyers....

  17. Predicting retail banking customers' attitude towards Internet ...

    African Journals Online (AJOL)

    chestt

    at increasing the adoption of Internet banking use among retail banking .... customers to access and perform financial transactions on their bank account from ..... customers barely agree with the statements that measured this construct.

  18. 76 FR 40779 - Retail Foreign Exchange Transactions

    Science.gov (United States)

    2011-07-12

    ... transaction are offset when: (i) The customer maintains separate accounts managed by different advisors; (ii... could nominate a deposit account as containing margin for its retail forex transactions. Nothing in this...

  19. Retailing and Shopping on the Internet.

    Science.gov (United States)

    Rowley, Jennifer

    1996-01-01

    Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

  20. Electricity prices in the Finnish retail market

    International Nuclear Information System (INIS)

    Lehto, Eero

    2011-01-01

    This study focuses, firstly, on the pricing of electricity in the Finnish retail market. In particular, the impact of the ownership structure on prices is tested empirically. Secondly, the influence of low-cost electricity sources on retail prices is considered. The question about whether the average fuel costs rather than the wholesale price determine the retail prices is thus addressed. The supply side behaviour characterised may explain the passivity of client activity in the seemingly competitive Finnish market. - Research highlights: → Ownership has a strong impact on retail prices in the Finnish electricity market. → Locally owned companies' rates are 5-15 per cent lower than investor owned companies' rates. → Own low cost acquisition of electricity helps local firms to keep prices at low levels.

  1. Green Power Partnership Top 30 Retail

    Science.gov (United States)

    EPA's Green Power Partnership is a voluntary program designed to reduce the environmental impact of electricity generation by promoting renewable energy. This list represents the largest green power users among retail partners within the GPP.

  2. 40 CFR 80.35 - Labeling of retail gasoline pumps; oxygenated gasoline.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Labeling of retail gasoline pumps; oxygenated gasoline. 80.35 Section 80.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Oxygenated Gasoline § 80.35 Labeling...

  3. Don't Sell Tobacco to Minors: What Retailers Need to Know PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2010-07-08

    PSA helps raise retailers awareness of the new federal tobacco regulations related to sale of cigarettes and smokeless tobacco products to people under 18.  Created: 7/8/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 7/8/2010.

  4. Face-to-face Tobacco Sales: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    2010-09-30

    This podcast reviews new federal tobacco product regulations that require retailers to sell cigarettes and smokeless tobacco products in a face-to-face exchange.  Created: 9/30/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 9/30/2010.

  5. Unpackaged Cigarettes and Smokeless Tobacco: What Retailers Need to Know PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2010-10-28

    This PSA helps retailers understand new federal regulations surrounding the sale of unpackaged cigarettes and smokeless tobacco.  Created: 10/28/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 10/28/2010.

  6. Advanced Control of Wheeled Inverted Pendulum Systems

    CERN Document Server

    Li, Zhijun; Fan, Liping

    2013-01-01

    Advanced Control of Wheeled Inverted Pendulum Systems is an orderly presentation of recent ideas for overcoming the complications inherent in the control of wheeled inverted pendulum (WIP) systems, in the presence of uncertain dynamics, nonholonomic kinematic constraints as well as underactuated configurations. The text leads the reader in a theoretical exploration of problems in kinematics,dynamics modeling, advanced control design techniques,and trajectory generation for WIPs. An important concern is how to deal with various uncertainties associated with the nominal model, WIPs being characterized by unstable balance and unmodelled dynamics and being subject to time-varying external disturbances for which accurate models are hard to come by.   The book is self-contained, supplying the reader with everything from mathematical preliminaries and the basic Lagrange-Euler-based derivation of dynamics equations to various advanced motion control and force control approaches as well as trajectory generation met...

  7. The Retail Designer in the Age of Phygital Retail: a Practice-based Retail Design Competence Framework for Retail Design Education

    OpenAIRE

    Claes, Stephanie; Quartier, Katelijn; Vanrie, Jan

    2017-01-01

    During the past two decades, digitalisation and the emergence of new online/mobile channels have changed retailing dramatically (Verhoef et al. 2015). The proliferation of channels and consumers’ demand for a seamless experience across them, is challenging retailers’ business strategies (Melero et al. 2016). Concerning the physical channel, professional literature (e.g. blogs, newsletters, opinion articles) urges retailers to shift towards a phygital strategy. By means of integrating digital ...

  8. Methodological challenges in retailer buying behaviour research

    DEFF Research Database (Denmark)

    Hansen, Tommy Holm; Skytte, Hans

    This paper presents a review of studies on retailer buying behaviour with focus on the methodological issues. It is argued that the researcher of retailer buying behaviour is faced with particular challenges regarding the sample frame, defining th of analysis, potentially small populations and low...... response rates, buying centres and product specific behaviour. At the end, the authors propose a descriptive research design that will try to take account of the mentioned issues....

  9. The retail market : a consumer perspective

    International Nuclear Information System (INIS)

    Girvan, J.

    2002-01-01

    A consumer's perspective of the Ontario open retail electricity market was presented. The author, who believes the retail market in Ontario is flawed, presents some key decisions that were made regarding open competition, that may have been done differently or which have helped the market move forward. It was noted that the 1996 report by the Macdonald Committee clearly recommended that retail competition should be phased in only after the wholesale market was in place. That report also cautioned about the risks of proceeding with an open retail market without being properly prepared. The Ontario government rejected the recommendations of the Macdonald Committee and chose to open both wholesale and retail markets at the same time. Another important decision by the Ontario Energy Board was to determine that Standard Supply Service customers would be billed on the basis of a spot price pass-through model. It was noted that the lack of understanding by consumers regarding the new market and the absence of a comprehensive education campaign gave retailers an opportunity to deceive some customers. Allowing retailing prior to the introduction of unbundled bills has also led to the current state of customer confusion. Although the government has now made communication efforts, it is believed that these efforts must be greater in assuring that local distribution companies are providing what is necessary to understand the new billing format. The government has introduced Bill 58, a new legislation that includes a Customer Bill of Rights. Although this is a good initiative, it does not help the thousands of people who were misled and locked into long-term contracts. It was recommended that immediate action must be taken in the retail sector to maintain customer confidence

  10. CALiPER Retail Lamps Study 3

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-02-01

    This is a special CALiPER report on LED lamps available through the retail marketplace and targeted toward general consumers. It follows similar reports published in 2011 and 2012 (products purchased in 2010 and 2011), and is intended as a continuation that identifies long-term trends. For this report, products were selected to investigate specific hypotheses, rather than represent a sample of the increasingly large retail LED market.

  11. Growing Role of Retail in Distribution Channels

    OpenAIRE

    Ishak Mesic

    2011-01-01

    This article aims to demonstrate the growing role of retail trade (retail) in the channels of distribution of goods both in domestic and international markets. Technical-technological development has provided great opportunities for all production of material goods, so that the focus of problem in the economic possibilities of playing shifted from production to sales opportunities, or consumption. The ultimate consumers and their needs and requirements have become a central area of study, bas...

  12. Gender Segregation in the Retail Industry

    OpenAIRE

    Lynch, Samantha

    2002-01-01

    This paper examines the phenomenon of occupational gender segregation in the retail industry, with a particular focus on part time working. The empirical data was gathered through a series of 59 interviews, and a small survey of employees, with store level managers in three UK retail organisations. The paper illustrates the extent of occupational gender segregation and considers the impact of such stereotyping on the gender pay gap, training and career development.\\ud \\ud Occupational gender ...

  13. A study of Canadian retail gasoline prices

    International Nuclear Information System (INIS)

    Eckert, A.L.

    1999-05-01

    Retail gasoline pricing in Canadian markets was examined to demonstrate why retail prices tend to follow one of two distinct patterns and that neither pattern is observable in the wholesale price. In many cities, retail prices are more rigid than wholesale prices, while in other markets, retail prices follow a cyclic pattern not seen in wholesale prices. This study examined why constant prices are observed in some cities, while other cities have cyclic prices. Theoretical justification was given to the argument that prices will remain constant only in markets in which there are only few gasoline companies with a small number of stations, but a large per-station capacity. It was shown that when one firm operates significantly more stations than its rival, a constant cost equilibrium cannot be maintained. However, a cycle equilibrium can be constructed in this case, and also when the two companies are similarly sized. An initial examination of available price, cost and market structure data shows that there is a positive correlation between price stability and concentration. The response of retail prices to wholesale price movements in the presence of a retail price cycle was also examined through the use of a simple model based on the predictions of the above theory. Data for the city of Windsor, Ontario was used for the modelling approach. A new cycle is created by an increase in price whenever the distance between the previous retail price and the current wholesale prices is very small. Retail prices are more responsive to wholesale prices over the increasing portion of the cycle. It was shown that when the asymmetric error correction model of Borenstein, Cameron and Gilbert is estimated, it indicates a more rapid response to wholesale price increases than to decreases. 72 refs., 22 tabs., 8 figs

  14. Loyalty programs challenges in retail banking industry

    OpenAIRE

    Ivanauskienė, Neringa; Auruškevičienė, Viltė

    2009-01-01

    The purpose of this paper is to examine the challenges of loyalty programs in retail banks in Lithuania. Case study methodology was chosen to analyze the loyalty programs launched by various banks to show how banks are building the loyalty of individual customers and what challenges these banks face. The findings suggest that the majority of analyzed loyalty programs reward a repeat purchasing. Lithuanian retail banks launching loyalty programs for two customer segments - the potentially prof...

  15. Clustering and Joint Marketing in Retail Trade

    OpenAIRE

    Bohlin, Nils

    2001-01-01

    This paper presents the idea that retail trade stories might cluster with their competitors to pool marketing expenses and thereby increase their individual visibility among consumers. In a model which presumes such a marketing technology we derive some new comparative statics results. In a small/mega center we expect more competing stores in retail trade markets where products are heterogenous and consumers like to compare products before they buy, i.e. where people like to shop around. The ...

  16. Retail business model transformation in multichannel environment

    OpenAIRE

    Chapagain, B. (Bimala)

    2015-01-01

    Abstract With the advent of internet and e-commerce, the way of carrying out business and transactions has changed to a great extent. Consumers are continuously changing the way they do shopping and this has forced retail business to transform their traditional brick and mortar into adopting multi-channel business models. Retailing is one of the most dynamic and competitive areas of business organization. Effective marketin...

  17. ASPECTS REGARDING THE MARKETING ENVIRONMENT OF RETAILERS

    OpenAIRE

    Dan Cristian Dabija

    2011-01-01

    The marketing environment in which producers or retailers act consists of the totality of factors and forces that come under the immediate control of a production or retail company and that influence the maintenance or development of profitable relationships with customers [Balaure, 2002, p.76]. It also represents the grouping of actors and of external forces of a company capable of influencing the way in which it develops and maintains satisfactory exchanges with the target market [Kotler, K...

  18. Attitudes of Chinese consumers towards retail formats

    OpenAIRE

    Staack, Tosten; Schramm, Matthias; Spiller, Achim

    2006-01-01

    The Chinese consumer goods market is widely considered to be one of the economic hot spots of the world. China seems to be the market with the largest growth potential within the next decade. Multina - tional retail companies, for example, Wal-Mart, Metro and Carrefour have made large investments to open up this new market. However, parallel to the positive aspects of the market development, foreign retail companies entering the market encounter numerous risks and difficulties. Whereas questi...

  19. A bilevel model for electricity retailers' participation in a demand response market environment

    International Nuclear Information System (INIS)

    Zugno, Marco; Morales, Juan Miguel; Pinson, Pierre; Madsen, Henrik

    2013-01-01

    Demand response programmes are seen as one of the contributing solutions to the challenges posed to power systems by the large-scale integration of renewable power sources, mostly due to their intermittent and stochastic nature. Among demand response programmes, real-time pricing schemes for small consumers are believed to have significant potential for peak-shaving and load-shifting, thus relieving the power system while reducing costs and risk for energy retailers. This paper proposes a game theoretical model accounting for the Stackelberg relationship between retailers (leaders) and consumers (followers) in a dynamic price environment. Both players in the game solve an economic optimisation problem subject to stochasticity in prices, weather-related variables and must-serve load. The model allows the determination of the dynamic price-signal delivering maximum retailer profit, and the optimal load pattern for consumers under this pricing. The bilevel programme is reformulated as a single-level MILP, which can be solved using commercial off-the-shelf optimisation software. In an illustrative example, we simulate and compare the dynamic pricing scheme with fixed and time-of-use pricing. We find that the dynamic pricing scheme is the most effective in achieving load-shifting, thus reducing retailer costs for energy procurement and regulation in the wholesale market. Additionally, the redistribution of the saved costs between retailers and consumers is investigated, showing that real-time pricing is less convenient than fixed and time-of-use price for consumers. This implies that careful design of the retail market is needed. Finally, we carry out a sensitivity analysis to analyse the effect of different levels of consumer flexibility. - Highlights: ► We model the game between electricity retailers and consumers under dynamic pricing. ► The retailer cuts procurement costs by shifting demand in time via price-incentive. ► Imbalance costs for the retailer taper

  20. Peculiarities of Clutch Forming Rails and Wheel Block Construction

    Science.gov (United States)

    Shiler, V. V.; Galiev, I. I.; Shiler, A. V.

    2018-03-01

    The clutch of the wheel and rail is significantly influenced by the design features of the standard wheel pair, which are manifested in the presence of "parasitic" slipping of the wheels along the rails during its movement. The purpose of the presented work is to evaluate new design solutions for wheel sets. The research was carried out using methods of comparative simulation modelling and physical prototyping. A new design of the wheel pair (block wheel pair) is proposed, which features an independent rotation of all surfaces of the wheels in contact with the rails. The block construction of the wheel pair forms open mechanical contours with the track gauge, which completely eliminates the "parasitic" slippage. As a result, in the process of implementing traction or braking forces, the coupling coefficient of the block construction of the wheel pair is significantly higher than that of existing structures. In addition, in the run-out mode, the resistance to movement of the block wheel pair is half as much. All this will allow one to significantly reduce the energy consumption for traction of trains, wear of track elements and crew, and to increase the speed and safety of train traffic.

  1. Phenomena of Foamed Concrete under Rolling of Aircraft Wheels

    Science.gov (United States)

    Jiang, Chun-shui; Yao, Hong-yu; Xiao, Xian-bo; Kong, Xiang-jun; Shi, Ya-jie

    2014-04-01

    Engineered Material Arresting System (EMAS) is an effective technique to reduce hazards associated with aircraft overrunning runway. In order to ascertain phenomena of the foamed concrete used for EMAS under rolling of aircraft wheel, a specially designed experimental setup was built which employed Boeing 737 aircraft wheels bearing actual vertical loads to roll through the foamed concrete. A number of experiments were conducted upon this setup. It is discovered that the wheel rolls the concrete in a pure rolling manner and crushes the concrete downwards, instead of crushing it forward, as long as the concrete is not higher than the wheel axle. The concrete is compressed into powder in-situ by the wheel and then is brought to bottom of the wheel. The powder under the wheel is loose and thus is not able to sustain wheel braking. It is also found that after being rolled by the wheel the concrete exhibits either of two states, i.e. either 'crushed through' whole thickness of the concrete or 'crushed halfway', depending on combination of strength of the concrete, thickness of the concrete, vertical load the wheel carries, tire dimension and tire pressure. A new EMAS design concept is developed that if an EMAS design results in the 'crushed through' state for the main gears while the 'crushed halfway' state for the nose gear, the arresting bed would be optimal to accommodate the large difference in strength between the nose gear and the main gear of an aircraft.

  2. AN OVERVIEW ON RETAIL REVERSE LOGISTICS

    Directory of Open Access Journals (Sweden)

    Ioana Olariu

    2014-07-01

    Full Text Available This article is a theoretical approach on retail reverse logistics. Environmental concern and the current marketing strategy have spurred retailers to implement strategies to facilitate product returns from end customers. Reverse logistics, indicating the process of this return flow, encompasses such activities as the movement of returned products, facilities to accommodate returned items, and overall remedy process for returned items. The retail industry, under great competitive pressure, has used return policies as a competitive weapon. Grocery retailers were the first to begin to focus serious attention on the problem of returns and to develop reverse logistics innovations. Grocery retailers first developed innovations such as reclamation centers. Reclamation centers, in turn, led to the establishment of centralized return centers. Centralizing returns has led to significant benefits for most firms that have implemented them. Over the last several years, retailers have consolidated. Now, more than ever, reverse logistics is seen as being important. This reverse distribution activity can be crucial to the survival of companies, because the permanent goodwill of the company is at stake. Businesses succeed because they respond to both external and internal changes and adjust in an effective manner to remain competitive.

  3. HIV / AIDS and the retail sector.

    Science.gov (United States)

    Michael, K

    1999-01-01

    Employing approximately 1.5 million employees and comprised of 80,000 employers, the retail and wholesale sector accounted for 16.1% of South Africa's gross domestic product in 1996. HIV/AIDS threatens the retail sector, but it is unclear whether the pandemic threatens equally every sub-sector of the industry. The 4 main sub-sectors are fast-moving consumer goods; clothing, footwear, and textiles; vehicles; and furniture and major appliances. The nature of retail infrastructure and competitive and economic trends are described. Over the next decade, AIDS may reduce the size of consumer markets through increased mortality, and will certainly slow growth in spending. The pandemic may also divert spending away from retail merchandise to health care, and threaten businesses which extend credit and offer death benefits and funeral policies to clients. AIDS morbidity and mortality could also disrupt supply chains, especially for retailers who buy their products locally. The vulnerability of retail activities is discussed, with reference to the Living Standards Measure (LSM) developed by the South African Advertising Research Foundation.

  4. Problems of locomotive wheel wear in fleet replacement

    Directory of Open Access Journals (Sweden)

    L.P. Lingaytis

    2013-08-01

    Full Text Available Purpose. To conduct a research and find out the causes of defects appearing on the wheel thread of freight locomotives 2М62 and SIEMENS ER20CF. Methodology. To find the ways to solve this problem comparing the locomotive designs and their operating conditions. Findings. After examining the nature of the wheel wear the main difference was found: in locomotives of the 2M62 line wears the wheel flange, and in the locomotives SIEMENS ER20CF – the tread surface. After installation on the 2M62 locomotive the lubrication system of flanges their wear rate significantly decreased. On the new freight locomotives SIEMENS ER20CF the flange lubrication systems of the wheel set have been already installed at the factory, however the wheel thread is wearing. As for locomotives 2M62, and on locomotives SIEMENS ER20CF most wear profile skating wheels of the first wheel set. On both locomotive lines the 2М62 and the SIEMENS ER20CF the tread profile of the first wheel set most of all is subject to the wear. After reaching the 170 000 km run, the tread surface of some wheels begins to crumble. There was a suspicion that the reason for crumb formation of the wheel surface may be insufficient or excessive wheel hardness or its chemical composition. In order to confirm or deny this suspicion the following studies were conducted: the examination of the rim surface, the study of the wheel metal hardness and the document analysis of the wheel production and their comparison with the results of wheel hardness measurement. Practical value. The technical condition of locomotives is one of the bases of safety and reliability of the rolling stock. The reduction of the wheel wear significantly reduces the operating costs of railway transport. After study completion it was found that there was no evidence to suggest that the ratio of the wheel-rail hardness could be the cause of the wheel surface crumbling.

  5. The colour wheels of art, perception, science and physiology

    Science.gov (United States)

    Harkness, Nick

    2006-06-01

    Colour is not the domain of any one discipline be it art, philosophy, psychology or science. Each discipline has its own colour wheel and this presentation examines the origins and philosophies behind the colour circles of Art, Perception, Science and Physiology (after image) with reference to Aristotle, Robert Boyle, Leonardo da Vinci, Goethe, Ewald Hering and Albert Munsell. The paper analyses and discusses the differences between the four colour wheels using the Natural Colour System® notation as the reference for hue (the position of colours within each of the colour wheels). Examination of the colour wheels shows the dominance of blue in the wheels of art, science and physiology particularly at the expense of green. This paper does not consider the three-dimensionality of colour space its goal was to review the hue of a colour with regard to its position on the respective colour wheels.

  6. OPTIMIZATION OF HEATING OF GEAR WHEEL USING NUMERICAL MODELING

    Directory of Open Access Journals (Sweden)

    Soňa Benešová

    2013-09-01

    Full Text Available Successful heat treating and carburizing of gear wheels for wind turbine gear boxes requires that plastic deformation in the wheel is minimized. Numerical modeling using the DEFORM software was aimed at exploring the effects of the base, on which the gear wheel rests during heating, on the heating process. Homogeneous heating was assumed. It was found that the base heats up more quickly than the workpiece. It is the consequence of the base's shape and volume. As a result, the base expands and slides against the wheel, predominantly at the first heating stage. Later on, it prevents the gear wheel from expanding, causing plastic deformation in the wheel. The findings were used for designing new heating schedules to minimize these undesirable interactions and to reduce the plastic deformation to a negligible magnitude. In addition, this paper presents an example of a practical use of numerical modeling in the DEFORM software.

  7. OPTIMIZATION OF HEATING OF GEAR WHEEL USING NUMERICAL MODELING

    Directory of Open Access Journals (Sweden)

    Sona Benesova

    2013-05-01

    Full Text Available Successful heat treating and carburizing of gear wheels for wind turbine gear boxes requires that plastic deformation in the wheel is minimized. Numerical modeling using the DEFORM software was aimed at exploring the effects of the base, on which the gear wheel rests during heating, on the heating process. Homogeneous heating was assumed. It was found that the base heats up more quickly than the workpiece. It is the consequence of the base's shape and volume. As a result, the base expands and slides against the wheel, predominantly at the first heating stage. Later on, it prevents the gear wheel from expanding, causing plastic deformation in the wheel. The findings were used for designing new heating schedules to minimize these undesirable interactions and to reduce the plastic deformation to a negligible magnitude. In addition, this paper presents an example of a practical use of numerical modeling in the DEFORM software.

  8. Labelling and marketing of bivalve and gastropod molluscs retailed in Sardinia, Italy between 2009 and 2013

    Directory of Open Access Journals (Sweden)

    Domenico Meloni

    2015-06-01

    Full Text Available The aim of the present survey was to investigate the correct enforcement of the Community rules on the labelling and marketing of bivalve and gastropod molluscs retailed in Sardinia, Italy between 2009 and 2013. A total of 1500 packages and labels for live bivalve and gastropod molluscs were considered. A total of 375 labels (25% presented non-compliance concerning the wrong trade name and additional wrong or missing information. The highest percentage of anomalous labels has been detected in small-scale retail shops (35% and open-air markets (25% compared with the big retailing chains (20%. The 5% of packages were not in compliance with the European Community rules on packaging of bivalve and gastropod molluscs. The high percentage of non-compliance with the European regulations on labelling results is a strong limitation for the consumers and highlights the need to improve the control system about labelling of seafood products.

  9. Labelling and Marketing of Bivalve and Gastropod Molluscs Retailed in Sardinia, Italy Between 2009 and 2013.

    Science.gov (United States)

    Meloni, Domenico

    2015-05-28

    The aim of the present survey was to investigate the correct enforcement of the Community rules on the labelling and marketing of bivalve and gastropod molluscs retailed in Sardinia, Italy between 2009 and 2013. A total of 1500 packages and labels for live bivalve and gastropod molluscs were considered. A total of 375 labels (25%) presented non-compliance concerning the wrong trade name and additional wrong or missing information. The highest percentage of anomalous labels has been detected in small-scale retail shops (35%) and open-air markets (25%) compared with the big retailing chains (20%). The 5% of packages were not in compliance with the European Community rules on packaging of bivalve and gastropod molluscs. The high percentage of non-compliance with the European regulations on labelling results is a strong limitation for the consumers and highlights the need to improve the control system about labelling of seafood products.

  10. Torsional Moment Measurement on Bucket Wheel Shaft of Giant Machine

    Directory of Open Access Journals (Sweden)

    Jiří FRIES

    2011-06-01

    Full Text Available Bucket wheel loading at the present time (torsional moment on wheel shaft, peripheral cutting force is determined from electromotor incoming power or reaction force measured on gearbox hinge. Both methods together are weighted by steel construction absorption of driving units and by inertial forces of motor rotating parts. In the article is described direct method of the torsional moment measurement, which eliminates mentioned unfavourable impacts except absorption of steel construction of bucket wheel itself.

  11. Analysis of traversable pits model to make intelligent wheeled vehicles

    Directory of Open Access Journals (Sweden)

    F. Abbasi

    2017-11-01

    Full Text Available In this paper, the issue of passing wheeled vehicles from pits is discussed. The issue is modeled by defining the limits of passing wheeled vehicles. The proposed model has been studied based on changes in the effective parameters. Finally, in order to describe the problem, the proposed model has been solved for wheeled vehicles based on the effective parameters by using one of the numerical methods.

  12. Strategy of image management in retail shops

    Directory of Open Access Journals (Sweden)

    Sandra Soče Kraljević

    2007-12-01

    Full Text Available A sound positioning in consumers’ mind, along with strong promotion support, brought many retail shops to the top. This is mostly thanks to the image created in the consumers’ mind. A retail shop’s image may but need not conform to reality. Image often looks like a cliché. It overstates certain elements of the shop while simply omitting others. That is exactly why image is of great importance and often crucial to consumer behavior. This paper aims at determining the impact of image on customer behavior in the course of decision making about shopping and choosing a particular retail shop. Image is a significant factor of success of every company, hence also of a retail shops. It is a relatively strong value and a component of creating competitive advantage. But if we do not pay sufficient attention to image, it can become counterproductive. Instead to, like an additional value helps creating and maintaining the advantage in competition and realization of business aims, transforms into a limiting factor. Therefore, it is imperative to identify the elements of image that are of greatest importance to customers. Research has shown that customers choose the retail shop first and after that products and brands within this shop. When it comes to the supermarket, as a kind of retail shop, research has shown that two out of three shopping decisions are made by the customer on the spot, that is, without previous planning. That practically means that we can influence customers with different sales techniques. The paper suggests different strategies of image management for supermarkets and conventional shops. For supermarkets it is the “widest assortment” strategy, while for conventional shops the strategy is that of a “selected group of products“. Improvements to research methods will enable getting more information about customer behavior, while pressures of increased competition in the business environment will force retailers to get

  13. High Fat High Sugar Diet Reduces Voluntary Wheel Running in Mice Independent of Sex Hormone Involvement

    Directory of Open Access Journals (Sweden)

    Heather L. Vellers

    2017-08-01

    Full Text Available Introduction: Indirect results in humans suggest that chronic overfeeding decreases physical activity with few suggestions regarding what mechanism(s may link overfeeding and decreased activity. The primary sex hormones are known regulators of activity and there are reports that chronic overfeeding alters sex hormone levels. Thepurpose of this study was to determine if chronic overfeeding altered wheel running through altered sex hormone levels.Materials and Methods: C57BL/6J mice were bred and the pups were weaned at 3-weeks of age and randomly assigned to either a control (CFD or high fat/high sugar (HFHS diet for 9–11 weeks depending on activity analysis. Nutritional intake, body composition, sex hormone levels, and 3-day and 2-week wheel-running activity were measured. Additionally, groups of HFHS animals were supplemented with testosterone (males and 17β-estradiol (females to determine if sex hormone augmentation altered diet-induced changes in activity.Results: 117 mice (56♂, 61♀ were analyzed. The HFHS mice consumed significantly more calories per day than CFD mice (male: p < 0.0001; female: p < 0.0001 and had significantly higher body fat (male: p < 0.0001; female: p < 0.0001. The HFHS diet did not reduce sex hormone levels, but did significantly reduce acute running-wheel distance in male (p = 0.05, 70 ± 28% and female mice (p = 0.02, 57 ± 26%. In animals that received hormone supplementation, there was no significant effect on activity levels. Two-weeks of wheel access was not sufficient to alter HFHS-induced reductions in activity or increases in body fat.Conclusion: Chronic overfeeding reduces wheel running, but is independent of the primary sex hormones.

  14. Effects of acute voluntary loaded wheel running on BDNF expression in the rat hippocampus.

    Science.gov (United States)

    Lee, Minchul; Soya, Hideaki

    2017-12-31

    Voluntary loaded wheel running involves the use of a load during a voluntary running activity. A muscle-strength or power-type activity performed at a relatively high intensity and a short duration may cause fewer apparent metabolic adaptations but may still elicit muscle fiber hypertrophy. This study aimed to determine the effects of acute voluntary wheel running with an additional load on brain-derived neurotrophic factor (BDNF) expression in the rat hippocampus. Ten-week old male Wistar rats were assigned randomly to a (1) sedentary (Control) group; (2) voluntary exercise with no load (No-load) group; or (3) voluntary exercise with an additional load (Load) group for 1-week (acute period). The expression of BDNF genes was quantified by real-time PCR. The average distance levels were not significantly different in the No-load and Load groups. However, the average work levels significantly increased in the Load group. The relative soleus weights were greater in the No-load group. Furthermore, loaded wheel running up-regulated the BDNF mRNA level compared with that in the Control group. The BDNF mRNA levels showed a positive correlation with workload levels (r=0.75), suggesting that the availability of multiple workload levels contributes to the BDNF-related benefits of loaded wheel running noted in this study. This novel approach yielded the first set of findings showing that acute voluntary loaded wheel running, which causes muscular adaptation, enhanced BDNF expression, suggesting a possible role of high-intensity short-term exercise in hippocampal BDNF activity. ©2017 The Korean Society for Exercise Nutrition

  15. Wheel running decreases the positive reinforcing effects of heroin.

    Science.gov (United States)

    Smith, Mark A; Pitts, Elizabeth G

    2012-01-01

    The purpose of this study was to examine the effects of voluntary wheel running on the positive reinforcing effects of heroin in rats with an established history of drug self-administration. Rats were assigned to sedentary (no wheel) and exercise (wheel) conditions and trained to self-administer cocaine under positive reinforcement contingencies. Rats acquiring cocaine self-administration were then tested with various doses of heroin during daily test sessions. Sedentary rats self-administered more heroin than exercising rats, and this effect was greatest at low and moderate doses of heroin. These data suggest that voluntary wheel running decreases the positive reinforcing effects of heroin.

  16. Module-based structure design of wheeled mobile robot

    Directory of Open Access Journals (Sweden)

    Z. Luo

    2018-02-01

    Full Text Available This paper proposes an innovative and systematic approach for synthesizing mechanical structures of wheeled mobile robots. The principle and terminologies used for the proposed synthesis method are presented by adopting the concept of modular design, isomorphic and non-isomorphic, and set theory with its associated combinatorial mathematics. The modular-based innovative synthesis and design of wheeled robots were conducted at two levels. Firstly at the module level, by creative design and analysing the structures of classic wheeled robots, a wheel module set containing four types of wheel mechanisms, a suspension module set consisting of five types of suspension frames and a chassis module set composed of five types of rigid or articulated chassis were designed and generalized. Secondly at the synthesis level, two kinds of structure synthesis modes, namely the isomorphic-combination mode and the non-isomorphic combination mode were proposed to synthesize mechanical structures of wheeled robots; which led to 241 structures for wheeled mobile robots including 236 novel ones. Further, mathematical models and a software platform were developed to provide appropriate and intuitive tools for simulating and evaluating performance of the wheeled robots that were proposed in this paper. Eventually, physical prototypes of sample wheeled robots/rovers were developed and tested so as to prove and validate the principle and methodology presented in this paper.

  17. Computation of wheel-rail contact force for non-mapping wheel-rail profile of Translohr tram

    Science.gov (United States)

    Ji, Yuanjin; Ren, Lihui; Zhou, Jinsong

    2017-09-01

    Translohr tram has steel wheels, in V-like arrangements, as guide wheels. These operate over the guide rails in inverted-V arrangements. However, the horizontal and vertical coordinates of the guide wheels and guide rails are not always mapped one-to-one. In this study, a simplified elastic method is proposed in order to calculate the contact points between the wheels and the rails. By transforming the coordinates, the non-mapping geometric relationship between wheel and rail is converted into a mapping relationship. Considering the Translohr tram's multi-point contact between the guide wheel and the guide rail, the elastic-contact hypothesis take into account the existence of contact patches between the bodies, and the location of the contact points is calculated using a simplified elastic method. In order to speed up the calculation, a multi-dimensional contact table is generated, enabling the use of simulation for Translohr tram running on curvatures with different radii.

  18. Light, Low, Mild, and Similar Terms: What Retailers Need to Know

    Centers for Disease Control (CDC) Podcasts

    2010-07-21

    This podcast helps raise retailers' and manufacturers' awareness of the new federal tobacco regulations. Under the new regulations, manufacturers can not produce any tobacco products labeled or advertised as "light," "low," or "mild." As of July 21, 2010, manufacturers may no longer distribute these products.  Created: 7/21/2010 by The CDC Division of News and Electronic Media and the FDA Center for Tobacco Products.   Date Released: 7/21/2010.

  19. HOW RETAILING HAS CHANGED? WHAT MARKETING DID FOR THIS CHANGE?

    Directory of Open Access Journals (Sweden)

    Rodica ERDEI

    2007-01-01

    Full Text Available Retailing is carried on by those business which sell goods to the final consumer. The obvious example is provided by the shops we all know and deal with. The retailing stage, therefore, is the one where goods reach the end of their journey from the manufacturer. This does not that in those instances there is not retailing. The manufacturer or wholesaler who sells direct to the consumer is acting as a retailer; he adds retailing to his other activities. What ever channel of distribution is used, the retailing function always exists. In the past almost all retailers confined their activities to retailing; they did not combine it with other activities. These we can call “traditional” retailers. The functions of the traditional retailer where/and are: they break bulk into saleable portions; they put the goods in a saleable condition; they make goods immediately available to consumers; they measure consumer preferences. But the times have changed! In the “new” retailing the retailer provides a long range of services to whom he sells and to those from whom he buys. We’ll have in mind in this paper the refrigeration engineering and the “artificial cold”, the creative services at the point of sale (POS, the POS marketing, the marketing activities a the point of promotion (POP, the international diversity. In recent years most retail businesses tend to grow, and the statistics proves this, as it is shown in the paper.

  20. A retailer's perspective on generation in Alberta

    International Nuclear Information System (INIS)

    Willerton, K.

    2003-01-01

    There are several reasons for a retailer to invest in power generation. This investment acts as a risk management hedge against fixed price retail load, while improving competitiveness in illiquid wholesale markets. Investing in power generation leverages the retailer's wholesale trading capabilities. It also provides appropriate returns. Some of the factors that ensure the success of a retailer investing in power generation are low cost structure, low risk, strong forward commodity market, owners with large healthy balance sheets, and willingness to finance projects entirely with equity. A cost comparison was presented for different generation technologies. ENMAX chose to invest in wind power since the costs were comparable to that of other technologies. In addition, green credits will lower the cost of wind power. With low environmental impacts and no fuel risk, wind energy fitted ENMAX's retail strategy. Green power at ENMAX (GREENMAX) was the first to implement a Green Power Residential program in 1998, followed by the Green Power Commercial program in 2000. The author discussed the McBride Lake Wind Farm located near Fort MacLeod, Alberta. figs

  1. RETAIL BANKING BUSINESS: CURRENT STATE ANDSPECIFIC FEATURES

    Directory of Open Access Journals (Sweden)

    Гузель Рефкадовна Фаизова

    2013-04-01

    Full Text Available The role and importance of the retail banking business in the banking sector continueto grow. The current state of the retail banking business is considered and specific features of this area in the face of growing demand for banking products and services by the public and interest from lending institutions are identified by the article.Purpose: Research of current state of retail banking business and detection specific features of this area.Methodology: In the process of analysis and researchof the question the methods of economical and statistical analysis, methods of comparison and generalizationwereused.Results: The conclusion is that interest in the retail banking business continues to grow.There were revealed the role and the importance of standardized service processes and standardized products and services delivering as one of the main line of development in the segment of retail business.DOI: http://dx.doi.org/10.12731/2218-7405-2013-3-2

  2. Retail firewood can transport live tree pests.

    Science.gov (United States)

    Jacobi, W R; Hardin, J G; Goodrich, B A; Cleaver, C M

    2012-10-01

    Untreated firewood can harbor destructive insects and pathogens and transport them to uninfested areas. In a national survey of retail locations selling firewood in 18 states, over half (52%) of the firewood was from sources out of the purchase state and 50% showed evidence of insect infestation. In a three state survey of southern Rocky Mountain retailers, the most common retailer types carrying firewood were grocery stores and department or big box stores followed by gas stations or convenience stores. In 2007-2009, we purchased 419 firewood bundles from retailers in Colorado, New Mexico, Utah, and Wyoming and caged the firewood to quantify insect emergence. Live insects emerged from 47% of firewood bundles over 18 mo of rearing time. Approximately 11 insects emerged on average from each infested bundle (1-520 per bundle). Pine, fir, and mixed-conifer bundles yielded the greatest number of insects. Beetles (Coleoptera) were prominent and made up the majority of individuals (3-60 individuals in each of 24 families). Most Coleoptera were bark and ambrosia beetles (subfamily Scolytinae) while wood borers (Buprestidae, Cerambycidae, Siricidae) occurred in lower numbers. Firewood with evidence of previous or current insect infestation was more likely to have insects emerge than firewood without such evidence. The risk of moving live native or nonindigenous insects in untreated firewood is high because insects emerged up to 558 d from purchase date. Retail firewood should be heat treated in a manner to eliminate insects that is uniformly accepted across North America.

  3. Chronic wheel running-induced reduction of extinction and reinstatement of methamphetamine seeking in methamphetamine dependent rats is associated with reduced number of periaqueductal gray dopamine neurons.

    Science.gov (United States)

    Sobieraj, Jeffery C; Kim, Airee; Fannon, McKenzie J; Mandyam, Chitra D

    2016-01-01

    Exercise (physical activity) has been proposed as a treatment for drug addiction. In rodents, voluntary wheel running reduces cocaine and nicotine seeking during extinction, and reinstatement of cocaine seeking triggered by drug-cues. The purpose of this study was to examine the effects of chronic wheel running during withdrawal and protracted abstinence on extinction and reinstatement of methamphetamine seeking in methamphetamine dependent rats, and to determine a potential neurobiological correlate underlying the effects. Rats were given extended access to methamphetamine (0.05 mg/kg, 6 h/day) for 22 sessions. Rats were withdrawn and were given access to running wheels (wheel runners) or no wheels (sedentary) for 3 weeks after which they experienced extinction and reinstatement of methamphetamine seeking. Extended access to methamphetamine self-administration produced escalation in methamphetamine intake. Methamphetamine experience reduced running output, and conversely, access to wheel running during withdrawal reduced responding during extinction and, context- and cue-induced reinstatement of methamphetamine seeking. Immunohistochemical analysis of brain tissue demonstrated that wheel running during withdrawal did not regulate markers of methamphetamine neurotoxicity (neurogenesis, neuronal nitric oxide synthase, vesicular monoamine transporter-2) and cellular activation (c-Fos) in brain regions involved in relapse to drug seeking. However, reduced methamphetamine seeking was associated with running-induced reduction (and normalization) of the number of tyrosine hydroxylase immunoreactive neurons in the periaqueductal gray (PAG). The present study provides evidence that dopamine neurons of the PAG region show adaptive biochemical changes during methamphetamine seeking in methamphetamine dependent rats and wheel running abolishes these effects. Given that the PAG dopamine neurons project onto the structures of the extended amygdala, the present findings also

  4. 76 FR 21427 - Proposed Collection; Comment Request for Regulation Project

    Science.gov (United States)

    2011-04-15

    ... other administrative provisions of special application to manufacturers and retailers excise taxes... Manufacturers and Retailers Excise Taxes. OMB Number: 1545-0723. Regulation Project Number: T.D. 8043. Abstract... regulation. Type of Review: Extension of a currently approved collection. Affected Public: Individuals...

  5. Using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS) to Assess Product Availability, Price Promotions, and Messaging in New Hampshire Vape Shop Retailers.

    Science.gov (United States)

    Kong, Amanda Y; Eaddy, Jessica L; Morrison, Susan L; Asbury, Donna; Lindell, Kristine M; Ribisl, Kurt M

    2017-04-01

    This is the first statewide census of the product availability, price promotions, and product messaging of vape shops. A comprehensive list of New Hampshire vape shops was developed through a previously validated online search method. Store audits were conducted in 55 stores between January and February 2016 using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS). Modifiable devices and cig-alikes were sold in 92.6% and 14.6% of stores, respectively. Cross-product promotions with tobacco products were rare, and messaging promoting e-cigarettes as effective cessation devices was found in 27.3% of all stores. Candy/fruit and menthol e-liquids were most commonly found in stores, and sampling of products was available in 83.6% of stores. Ten (18.2%) stores did not have a minimum age sign posted, and self-service sampling displays were available in about one-fifth of stores. Using V-STARS to conduct retail assessments of vape shops is feasible and is important for assessing the changing retail environment of vape shops. Vape shops distinguish themselves from traditional tobacco product retailers and offer a variety of products to customize a consumer's experience. Regulations and effective enforcement ensuring accurate health messages is essential.

  6. Using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS) to Assess Product Availability, Price Promotions, and Messaging in New Hampshire Vape Shop Retailers

    Science.gov (United States)

    Kong, Amanda Y.; Eaddy, Jessica L.; Morrison, Susan L.; Asbury, Donna; Lindell, Kristine M.; Ribisl, Kurt M.

    2017-01-01

    Objectives This is the first statewide census of the product availability, price promotions, and product messaging of vape shops. Methods A comprehensive list of New Hampshire vape shops was developed through a previously validated online search method. Store audits were conducted in 55 stores between January and February 2016 using the Vape Shop Standardized Tobacco Assessment for Retail Settings (V-STARS). Results Modifiable devices and cig-alikes were sold in 92.6% and 14.6% of stores, respectively. Cross-product promotions with tobacco products were rare, and messaging promoting e-cigarettes as effective cessation devices was found in 27.3% of all stores. Candy/fruit and menthol e-liquids were most commonly found in stores, and sampling of products was available in 83.6% of stores. Ten (18.2%) stores did not have a minimum age sign posted, and self-service sampling displays were available in about one-fifth of stores. Conclusions Using V-STARS to conduct retail assessments of vape shops is feasible and is important for assessing the changing retail environment of vape shops. Vape shops distinguish themselves from traditional tobacco product retailers and offer a variety of products to customize a consumer’s experience. Regulations and effective enforcement ensuring accurate health messages is essential. PMID:29201950

  7. Drowsy Driver Detection via Steering Wheel

    Directory of Open Access Journals (Sweden)

    Herlina ABDUL RAHIM

    2010-09-01

    Full Text Available The main purpose of this project is to produce a safety system especially for fatigue car driver so as to prevent from accidents. The statistic on road fatality shows that human error constitute of 64.84 % road accidents fatality and 17.4 % due to technical factors. These systems encompassed the approach of hand pressure applied on the steering wheel. The steering will be installed with pressure sensors. At the same time these sensors can be used to measure gripping force while driving.

  8. Electric wheel hub motor; Elektrischer Radnabenmotor

    Energy Technology Data Exchange (ETDEWEB)

    Groeninger, Michael; Kock, Alexander [IFAM Bremen (Germany); Horch, Felix [IFAM Bremen (Germany). Komponentenentwicklung; Pleteit, Hermann [IFAM Bremen (Germany). Abt. Giessereitechnologie und Komponentenentwicklung

    2012-02-15

    The bundled competences of the participating Fraunhofer Institutes have made it possible to develop a wheel hub motor that has essentially overcome currently existing technical hurdles, enabling its use in a vehicle. In addition to direct technical challenges such as sealing against external influences, high bearing stiffness requirements, necessary high torque densities and simple integration in the chassis, the safety aspects required by modern vehicles were also taken into account. A drive system that guarantees safe driving states, even in the case of malfunction, was developed through the combination of recuperative braking with a classic mechanical braking system and redundant motor design. (orig.)

  9. The Effects of Application of Lean Concept in Retail

    Directory of Open Access Journals (Sweden)

    Radojko LUKIC

    2012-06-01

    Full Text Available Lean principles and techniques can be successfully applied in the retail sector. In the retail sector, lean approach improves operational flows. Lean retail encourages manufacturers to produce standard products in accordance with the created (placed orders from retailers pursuant to the demand of their consumers. Characteristics of the retail market are: strong competition, shorter product life cycle, longer product development time and high sensitivity of demand. In order to be more competitive and profitable today's retailers operate strategically oriented to lower prices and gain exemption from holding unnecessary stocks. Lean retail is an example of best practices of successful operational strategies which management need to accept - to maximize the operating efficiency of the retail process.

  10. Comparative analysis of wholesale and retail frozen fish marketing ...

    African Journals Online (AJOL)

    Comparative analysis of wholesale and retail frozen fish marketing in Port Harcourt Metropolis, Rivers State, Nigeria. ... from each market giving 30 retail marketers and 30 wholesale marketers. ... EMAIL FULL TEXT EMAIL FULL TEXT

  11. What Older Adults Need to Know about Retail Clinics

    Science.gov (United States)

    What Older Adults Need to Know about Retail Clinics Expert Information from Healthcare Professionals Who Specialize in the Care of Older Adults Retail clinics are medical clinics based in pharmacies, ...

  12. Internationalization and Performance of Retail Firms

    DEFF Research Database (Denmark)

    Assaf, A. George; Josiassen, Alexander; T. Ratchford, Brian

    2012-01-01

    retailers through facilitating the transfer of learning in international markets. The study innovates by introducing a new performance metric, and an advanced methodology to account for the dynamic aspects of organizational learning. Testing our hypotheses on a sample of international retailers, we find......This paper offers a fresh approach to the literature examining the effect of internationalization on retail-firm performance. We draw on the organizational learning theory to test the moderating effect of four variables which are hypothesized to affect the performance of internationalizing...... that the relationship between internationalization and performance is U-shaped, and moderated by mergers and acquisitions, age at entry to international markets and country of origin. The findings extend prior research by providing more comprehensive evidence regarding the conditions under which internationalization...

  13. How retailer coupons increase attitudinal loyalty –

    DEFF Research Database (Denmark)

    Wierich, Ralf; Zielke, Stephan

    2014-01-01

    Purpose – The aim of this paper is to investigate how different design elements of retailer coupons increase the attitudinal loyalty towards retailers. Design/methodology/approach – Three design elements are manipulated in a 2x2x2 experimental design. Data is analysed using structural equation...... and the minimum purchase amount require at least some cognitive processing to have a loyalty impact. Research limitations/implications – Future studies can use the developed framework to test the impact of other design elements, promotion types or loyalty schemes. Practical implications – The results underline...... that personalization offers opportunities for increasing loyalty without the necessity of large investments. As these effects can occur without redemption, coupon promotions should not be evaluated based on redemption rates only. Originality/value – The study extends existing research by focusing on retailer coupons...

  14. WHOLESALER TO RETAILER GOODS FORWARDING CONTROLLING

    Directory of Open Access Journals (Sweden)

    Oleg NIKIFOROV

    2016-06-01

    Full Text Available The modern trends in the development of logistics controlling through the prism of collaboration between wholesale companies and retail chains have been considered. The nature and structure of cargo transportation by the wholesale company to the retail chain have been analysed. The key transportation processes have been identified and the reliance on transportation drivers-forwarders for their effectiveness has been determined. The study has resulted in the program-mathematical approach to the transportation controlling automation used by the wholesale company to deliver goods to the retail chain as well as the mathematical model of the system information flow. The practical recommendations for the mathematical software implementation using the AWS Forwarder software product as an example have been illustrated.

  15. Preliminary experimental evaluation of a four wheel motors, batteries plus ultracapacitors and series hybrid powertrain

    Energy Technology Data Exchange (ETDEWEB)

    Rambaldi, Lorenzo [Interuniversity Research Center on Sustainable Development, Sapienza University of Rome, Rome (Italy); Bocci, Enrico [Department of Mechanics and Aeronautics, Sapienza University of Rome, Rome (Italy); Orecchini, Fabio [Guglielmo Marconi University, Rome (Italy)

    2011-02-15

    This paper reports the preliminary experimental evaluation of a four wheel motors series hybrid prototype equipped with an internal combustion engine coupled to a generator and an energy recovery system (batteries plus ultracapacitors). The paper analyses global efficiency (energy dissipated to overcome the dissipative forces on energy dissipated in fuel), autonomy in electric configuration, and the efficiency of the regenerative braking system. The tests were carried out in a test cell equipped with a chassis dynamometer. The tests were performed according to the current regulated procedures. A constant speed test was performed in order to evaluate the autonomy of the vehicle in the electric configuration. The results show that the real tank to wheels efficiency is about 30% for HOST as a series hybrid and 79% for HOST as an electric vehicle. (author)

  16. Exploring the trade-off between competing objectives for electricity energy retailers through a novel multi-objective framework

    International Nuclear Information System (INIS)

    Charwand, Mansour; Ahmadi, Abdollah; Siano, Pierluigi; Dargahi, Vahid; Sarno, Debora

    2015-01-01

    Highlights: • Proposing a new stochastic multi-objective framework for an electricity retailer. • Proposing a MIP model for an electricity retailer problem. • Employing ε-constraint method to generate Pareto solution. - Abstract: Energy retailer is the intermediary between Generation Companies and consumers. In the medium time horizon, in order to gain market share, he has to minimize his selling price while looking at the profit, which is dependent on the revenues from selling and the costs to buy energy from forward contracts and participation in the market pool. In this paper, the two competing objectives are engaged proposing a new multi-objective framework in which a ε-constraint mathematical technique is used to produce the Pareto front (set of optimal solutions). The stochasticity of energy prices in the market and customer load demand are coped with the Lattice Monte Carlo Simulation (LMCS) and the method of the roulette wheel, which allow the stochastic multi-objective problem to be turned into a set of deterministic equivalents. The method performance is tested into some case studies

  17. Fashion Retail Master Data Model and Business Development

    OpenAIRE

    Hovmøller, Harald; Tambo, Torben

    2014-01-01

    Retailing, and particularly fashion retailing, is changing into a much more technology driven business model using omni-channel retailing approaches. Also analytical and data-driven marketing is on the rise. However, there has not been paid a lot of attention to the underlying and underpinning datastructures, the characteristics for fashion retailing, the relationship between static and dynamic data, and the governance of this. This paper is analysing and discussing the data dimension of fash...

  18. Retailing & design: combining the best of both worlds

    OpenAIRE

    QUARTIER, Katelijn; LOMMELEN, Tinne

    2014-01-01

    In today’s knowledge economies, the importance of lifelong learning for active professionals grows tremendously (Vanweddingen, 2009). Also in a traditional sector like retailing. Because of evolutions in the interplay between on- and offline stores and omni-channel retail, retailers need to follow up on these developments to remain competitive (Van Ossel, 2014). Looking at the current educational offer in Europe to professionals in the domain of retail, two perspectives are possible, i.e. the...

  19. Pricing, Variety, and Inventory Decisions in Retail Operations Management

    OpenAIRE

    Maddah, Bacel

    2005-01-01

    This dissertation is concerned with decision making in retail operations management. Specifically, we focus on pricing, variety, and inventory decisions, which are at the interface of the marketing and operations functions of a retail firm. We consider two problems that relate to two major types of retail goods. First, we study joint pricing, variety, and inventory decisions for a set of substitutable" items that serve the same need for the consumer (commonly referred to as a "retailer's ...

  20. RETAIL READY PACKAGING – WHAT'S IN IT FOR FOOD MANUFACTURERS?

    OpenAIRE

    Davor Dujak; Martina Ferencic; Jelena Franjkovic

    2014-01-01

    Process of concentration in retail market, as well in Croatia as in other European countries, has insured for retailers stronger negotiating position in fast moving consumer goods supply chain, especially in food chain. Retailers have initiated retail supply chain management - a lot of different cost efficiency processes in food supply chain which they were able to force with their suppliers, usually with the absence of an equitable distribution of savings that this collaboration enables. One...

  1. Economy system and operation of a selected retail chain

    OpenAIRE

    KALUSOVÁ, Monika

    2011-01-01

    The goal of the thesis Economy system and operation of a selected retail chain is to explore and analyze the sphere in which the retailer chain operates, and evaluate their financial situation. At the same time, the selected retail chain will compare with the selected sectoral competition. The first part of thesis covers the theoretical information about issues, in particular the definition of basic terms of trade and retail. The second part of thesis includes application theoretical knowledg...

  2. When IKEA enters : Do local retailers win or lose?

    OpenAIRE

    Daunfeldt, Sven-Olov; Mihaescu, Oana; Nilsson, Helena; Rudholm, Niklas

    2015-01-01

    IKEA is one of the world’s largest retailers, but little is known about how IKEA impact incumbent retailers when deciding to enter a local market. Previous studies on the effects of big-box entry on surrounding retailers have also generated inconclusive results, and mainly been focused towards entry of Wal-Mart in the United States. We contribute to this literature by investigating the effects of IKEA entry on revenues and employment for incumbent retail firms in three Swedish municipalities ...

  3. Antecedents of loyalty in an online retailing business

    OpenAIRE

    Hashemi, Roshanak

    2013-01-01

    Retailing industry is challenged by empowered customers, scattered markets and intensified competition. Online retailing has a unique opportunity to take a leading role in the global marketplace by providing location free, customer controlled, and information rich retail service. Customer experience with an online retailer includes multiple factors. It is crucial to determine what website functions and features should be emphasized to create a satisfactory experience. Understanding an effecti...

  4. Cost reduction analysis in the online retail as compared to the classic retail

    OpenAIRE

    Mirela Camelia BABA

    2015-01-01

    The industry of retail was segmented by new technologies, but the financial performance of every segment is far to explain the market share. An exploratory study is necessary in order to explain the appeal for entrepreneurs. A comparison between two new forms of retail is used to understand the business models in this industry. Due to the fact that the maturity of the new segment of retail are different in various countries, the study cases focused on the some leaders firms from USA, China an...

  5. Customer satisfaction in European food retailing

    DEFF Research Database (Denmark)

    Juhl, Hans Jørn; Kristensen, Kai; Østergaard, Peder

    2002-01-01

    based upon measures identifying how potential partners are perceived by the customers. Based on results from the European Customer Satisfaction study, a comparative analysis of customer satisfaction in Europe is conducted. Some specific Danish results are shown and the relationship between customer...... loyalty, supermarket type and ownership structure is studied. The relationship between results after taxes and customer loyalty is documented.......Customer satisfaction and customer loyalty is becoming an increasingly important factor in modern retailing - a market characterized by slow growth and intense competition. Big non-European chains such as Walmart are already present in some countries and consider to buy some of the retail chains...

  6. Multinational retailers and home country food exports

    OpenAIRE

    Cheptea, Angela; Latouche, Karine; Emlinger, Charlotte

    2015-01-01

    This article questions whether food exports to a given national market are impacted by a domestic retailer opening in that market. To answer this question, we considered an empirical gravity-type trade model. We tested our model with data on bilateral exports of food products sold in supermarkets (groceries) on a large panel of countries, as well as the foreign grocery sales of the world’s 100 largest retail companies from 2001–2010. We found a strong positive effect of the overseas presence ...

  7. Buying atmosphere in the selected retail unit

    OpenAIRE

    GOLKOVÁ, Iveta

    2013-01-01

    Diploma thesis deals with analysis of the shopping atmosphere of selected retail unit depending on its main objective. In the first part of the thesis - literary research - the theoretical background of the issue is processed. The second part - own work - already deals with the analysis. Retail unit Tesco České Budějovice was chosen for the analysis and a description of its shopping atmosphere is included in the work. The main method of analysis was an on-line questionnaire survey which was c...

  8. Issues of innovations in large retailers marketing

    Directory of Open Access Journals (Sweden)

    Simona BĂLĂŞESCU

    2015-12-01

    Full Text Available Analysing the way distribution systems evolved in various countries it can be seen that, in all areas of the globe, the distribution has become progressively dynamic, suffering mutations on all levels, changing constantly the methods of marketing and sale, distribution forms, geographic distribution, etc. Retail sector has become a dynamic sector, with a rapid evolution and various forms of organization, mainly due to economic development and technological progress we have witnessed in recent years. To the rapid development of retail contributed the innovation, allowing it to adapt rapidly to market conditions, to continuous growth in consumer demands and requirements and the need for traders to streamline their business activities.

  9. Internet Retailing as a Marketing Strategy

    OpenAIRE

    Janssen, Maarten; Noll, R.

    2005-01-01

    textabstractWe analyze the incentives for incumbent bricks-and-mortar firms and new entrants to start an online retail channel in a differentiated goods market. To this end we set up a two-stage model where firms first decide whether or not to build the infrastructure necessary to start an online retail channel and then compete in prices using the channels they have opened up. Consumers trade-off the convenience of online shopping and the ease to compare prices, with online uncertainties. Wit...

  10. Retail industry adopting change : adaptation: automation: benefits

    OpenAIRE

    Ahmed, Nabeel

    2013-01-01

    This thesis contains the research on the key change adoptive agents/forces and the solu-tions to the world‟s rapidly growing and one of the most consumer facing industry. The trillions worth retail industries are undergoing the period of important restructuring inter-nally and externally. The author highlights the key factors that force the retail industry to adopt modern technologies for their daily business processes in order to be more competi-tive. The factors have been viewed in two pers...

  11. Retail Structured Products for Socially Responsible Investments

    DEFF Research Database (Denmark)

    Jessen, Pernille

    Institutional investors are the main drivers of demand for socially responsible investment (SRI). Preferences for non- nancial goals such as social and environmental sustainability are also held by small retail agents who, nonetheless, are almost non-existent in the market. This paper studies how...... and when it can be utility enhancing to engage in SRI: It proposes a quantitative method to incorporate responsibility into the investment decision and investigates how structured financial instruments can facilitate access to SRI for small retail agents. The goal is to demonstrate market potential...

  12. Wheelchair users' perceptions of and experiences with power assist wheels.

    Science.gov (United States)

    Giacobbi, Peter R; Levy, Charles E; Dietrich, Frederick D; Winkler, Sandra Hubbard; Tillman, Mark D; Chow, John W

    2010-03-01

    To assess wheelchair users' perceptions of and experiences with power assist wheels using qualitative interview methods. Qualitative evaluations were conducted in a laboratory setting with a focus on users' experiences using power assist wheel in their naturalistic environments. Participants consisted of seven women and 13 men (M(age) = 42.75, SD = 14.68) that included one African American, one Hispanic, 17 whites, and one individual from Zambia. Qualitative interviews were conducted before, during, and after use of a power assist wheel. Main outcome measures included the wheelchair users' evaluations and experiences related to the use of power assist wheels. The primary evaluations included wheeling on challenging terrains, performance of novel activities, social/family aspects, fatigue, and pain. These descriptions indicated that most participants perceived positive experiences with the power assist wheels, including access to new and different activities. Secondary evaluations indicated that the unit was cumbersome and prohibitive for some participants because of difficulties with transport in and out of a vehicle and battery life. Most participants felt that power assist wheels provided more independence and social opportunities. The power assist wheel seems to offer physical and social benefits for most wheelers. Clinicians should consider users' home environment and overall life circumstances before prescribing.

  13. Hybrid Control Design for a Wheeled Mobile Robot

    DEFF Research Database (Denmark)

    Bak, Thomas; Bendtsen, Jan Dimon; Ravn, Anders Peter

    We present a hybrid systems solution to the problem of trajectory tracking for a four-wheel steered four-wheel driven mobile robot. The robot is modelled as a non-holonomic dynamic system subject to pure rolling, no-slip constraints. Under normal driving conditions, a nonlinear trajectory tracking...

  14. Hybrid Control Design for a Wheeled Mobile Robot

    DEFF Research Database (Denmark)

    Bak, Thomas; Bendtsen, Jan Dimon; Ravn, Anders Peter

    2003-01-01

    We present a hybrid systems solution to the problem of trajectory tracking for a four-wheel steered four-wheel driven mobile robot. The robot is modelled as a non-holonomic dynamic system subject to pure rolling, no-slip constraints. Under normal driving conditions, a nonlinear trajectory tracking...

  15. First Wheel of the Hadronic EndCap Calorimeter Completed

    CERN Multimedia

    Oram, C.J.

    2002-01-01

    With the LAr calorimeters well advanced in module production, the attention is turning to Batiment 180 where the calorimeter modules are formed into complete detectors and inserted into their respective cryostats. For the Hadronic End Cap (HEC) Group the task in B180 is to assemble the wheels, rotate them into their final orientation, and put them onto the cradle in front of the End Cap Cryostat. These tasks have been completed for the first HEC wheel in the B180 End Cap Clean Room. Given that this wheel weighs 70 tons the group is very relieved to have established that these gymnastics with the wheel proceed in a routine fashion. To assemble a wheel we take modules that have already been cold tested, do the final electrical testing and locate them onto the HEC wheel assembly table. Four wheels are required in total, each consisting of 32 modules. Wheel assembly is done in the horizontal position, creating a doughnut-like object sitting on the HEC table. The first picture shows the last module being added ...

  16. Procedure and applications of combined wheel/rail roughness measurement

    NARCIS (Netherlands)

    Dittrich, M.G.

    2009-01-01

    Wheel-rail roughness is known to be the main excitation source of railway rolling noise. Besides the already standardised method for direct roughness measurement, it is also possible to measure combined wheel-rail roughness from vertical railhead vibration during a train pass-by. This is a different

  17. Cyber Security Considerations for Autonomous Tactical Wheeled Vehicles

    Science.gov (United States)

    2016-04-01

    Update Will Enable Autonomous Driving. Retrieved August 6, 2015, from http://spectrum.ieee.org/: http://spectrum.ieee.org/ cars -that-think...Cyber Security Considerations for Autonomous Tactical Wheeled Vehicles 1 UNCLASSIFIED Cyber Security Considerations for... Autonomous Tactical Wheeled Vehicles Sebastian C Iovannitti 4/1/2016 Submitted to Lawrence Technological University College of Management in

  18. 49 CFR 230.112 - Wheels and tires.

    Science.gov (United States)

    2010-10-01

    ... wheels mounted on the same axle shall not vary more than 1/4 inch. (d) Tire thickness. Wheels may not have tires with a minimum thickness less than that indicated in the table in this paragraph (d). When... the minimum thickness of tires may be as much below the limits specified earlier in this paragraph (d...

  19. Load-bearing processes in agricultural wheel-soil systems

    NARCIS (Netherlands)

    Tijink, F.G.J.

    1988-01-01

    In soil dynamics we distinguish between loosening and loadbearing processes. Load-bearing processes which can occur under agricultural rollers, wheels, and tyres are dealt with In this dissertation.

    We classify rollers, wheels, and tyres and treat some general aspects of these

  20. The Wheels of Stress Go 'Round and 'Round

    Science.gov (United States)

    Brey, Rebecca A.; Clark, Susan E.

    2012-01-01

    "The Wheels of Stress Go Round and Round" teaching idea uses three activity wheels to reinforce stress-related content and concepts. After presenting a definition of stress, the instructor assists students in identifying stressors, and aids in formulating a list of negative, reactive behaviors and a list of positive coping mechanisms. Using…

  1. Hybrid Control Design for a Wheeled Mobile Robot

    DEFF Research Database (Denmark)

    Bak, Thomas; Bendtsen, Jan Dimon; Ravn, Anders Peter

    2003-01-01

    We present a hybrid systems solution to the problem of trajectory tracking for a four-wheel steered four-wheel driven mobile robot. The robot is modelled as a non-holonomic dynamic system subject to pure rolling, no-slip constraints. Under normal driving conditions, a nonlinear trajectory trackin...

  2. Multi-scale Fatigue Damage Life Assessment of Railroad Wheels

    Science.gov (United States)

    2018-01-01

    This study focused on the presence of a crack in the railway wheels subsurface and how it affects the wheels fatigue life. A 3-D FE-model was constructed to simulate the stress/strain fields that take place under the rolling contact of railway ...

  3. Wheeling and transmission system service policy in North America

    International Nuclear Information System (INIS)

    Casazza, J.A.; Schultz, A.J.; Limmer, H.D.

    1991-01-01

    This paper provides a review and discussion of the status of wheeling in the USA and Canada; the pros and cons of the new policies that are evolving and under consideration for wheeling and transmission access; specific case examples of some of the difficulties that have arisen; and the potential for new transmission technology. (author)

  4. Lateral ring metal elastic wheel absorbs shock loading

    Science.gov (United States)

    Galan, L.

    1966-01-01

    Lateral ring metal elastic wheel absorbs practically all shock loading when operated over extremely rough terrain and delivers only a negligible shock residue to associated suspension components. The wheel consists of a rigid aluminum assembly to which lateral titanium ring flexible elements with treads are attached.

  5. Possibilities of using welding-on technologies in crane wheel ...

    Indian Academy of Sciences (India)

    WINTEC

    Abstract. The paper deals with analysis of welds-on quality of traverse crane wheels made from gr. 90–60 mate- rial, ASTM A148. Three types of welding-on technology with various filling materials were used. On wheel after wearing was welded-on one interlayer by a combination of additional materials, wire A 106 with F 11 ...

  6. Simulation of Intelligent Single Wheel Mobile Robot

    Directory of Open Access Journals (Sweden)

    Maki K. Rashid

    2008-11-01

    Full Text Available Stabilization of a single wheel mobile robot attracted researcher attentions in robotic area. However, the budget requirements for building experimental setups capable in investigating isolated parameters and implementing others encouraged the development of new simulation methods and techniques that beat such limitations. In this work we have developed a simulation platform for testing different control tactics to stabilize a single wheel mobile robot. The graphic representation of the robot, the dynamic solution, and, the control scheme are all integrated on common computer platform using Visual Basic. Simulation indicates that we can control such robot without knowing the detail of it's internal structure or dynamics behaviour just by looking at it and using manual operation tactics. Twenty five rules are extracted and implemented using Takagi-Sugeno's fuzzy controller with significant achievement in controlling robot motion during the dynamic simulation. The resulted data from the successful implementation of the fuzzy model are used to utilize and train a neurofuzzy controller using ANFIS scheme to produce further improvement in robot performance

  7. Camber Angle Inspection for Vehicle Wheel Alignments.

    Science.gov (United States)

    Young, Jieh-Shian; Hsu, Hong-Yi; Chuang, Chih-Yuan

    2017-02-03

    This paper introduces an alternative approach to the camber angle measurement for vehicle wheel alignment. Instead of current commercial approaches that apply computation vision techniques, this study aims at realizing a micro-control-unit (MCU)-based camber inspection system with a 3-axis accelerometer. We analyze the precision of the inspection system for the axis misalignments of the accelerometer. The results show that the axes of the accelerometer can be aligned to the axes of the camber inspection system imperfectly. The calibrations that can amend these axis misalignments between the camber inspection system and the accelerometer are also originally proposed since misalignments will usually happen in fabrications of the inspection systems. During camber angle measurements, the x -axis or z -axis of the camber inspection system and the wheel need not be perfectly aligned in the proposed approach. We accomplished two typical authentic camber angle measurements. The results show that the proposed approach is applicable with a precision of ± 0.015 ∘ and therefore facilitates the camber measurement process without downgrading the precision by employing an appropriate 3-axis accelerometer. In addition, the measured results of camber angles can be transmitted via the medium such as RS232, Bluetooth, and Wi-Fi.

  8. Camber Angle Inspection for Vehicle Wheel Alignments

    Directory of Open Access Journals (Sweden)

    Jieh-Shian Young

    2017-02-01

    Full Text Available This paper introduces an alternative approach to the camber angle measurement for vehicle wheel alignment. Instead of current commercial approaches that apply computation vision techniques, this study aims at realizing a micro-control-unit (MCU-based camber inspection system with a 3-axis accelerometer. We analyze the precision of the inspection system for the axis misalignments of the accelerometer. The results show that the axes of the accelerometer can be aligned to the axes of the camber inspection system imperfectly. The calibrations that can amend these axis misalignments between the camber inspection system and the accelerometer are also originally proposed since misalignments will usually happen in fabrications of the inspection systems. During camber angle measurements, the x-axis or z-axis of the camber inspection system and the wheel need not be perfectly aligned in the proposed approach. We accomplished two typical authentic camber angle measurements. The results show that the proposed approach is applicable with a precision of ± 0.015 ∘ and therefore facilitates the camber measurement process without downgrading the precision by employing an appropriate 3-axis accelerometer. In addition, the measured results of camber angles can be transmitted via the medium such as RS232, Bluetooth, and Wi-Fi.

  9. Bridging Theory and Practice in an Applied Retail Track

    Science.gov (United States)

    Lange, Fredrik; Rosengren, Sara; Colliander, Jonas; Hernant, Mikael; Liljedal, Karina T.

    2018-01-01

    In this article, we present an educational approach that bridges theory and practice: an applied retail track. The track has been co-created by faculty and 10 partnering retail companies and runs in parallel with traditional courses during a 3-year bachelor's degree program in retail management. The underlying pedagogical concept is to move retail…

  10. RETAIL ORGANIZATION, A SUGGESTED ADULT DISTRIBUTIVE EDUCATION COURSE OUTLINE.

    Science.gov (United States)

    MAURO, RALPH N.; AND OTHERS

    THIS SUGGESTED OUTLINE FOR A COURSE ON RETAIL ORGANIZATION IS PLANNED FOR FIVE 2-HOUR SESSIONS ON (1) EVOLUTION OF RETAIL ORGANIZATIONAL STRUCTURE, (2) ORGANIZATION, INCLUDING CONCEPTS, PRINCIPLES, AND PRACTICES, (3) TYPICAL RETAIL ORGANIZATION PATTERNS, (4) ORGANIZATIONAL AND FUNCTIONAL ANAYSIS, INCLUDING MERCHANDISING, SALES PROMOTION, AND…

  11. Factory Gate Pricing: An Analysis of the Dutch Retail Distribution

    NARCIS (Netherlands)

    H.M. le Blanc; F. Cruijssen (Frans); H.A. Fleuren; M.B.M. de Koster (René)

    2004-01-01

    textabstractFactory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution. Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers. Owing to both the asymmetry in the distribution networks

  12. Factory Gate Pricing : An Analysis of the Dutch Retail Distribution

    NARCIS (Netherlands)

    Le Blanc, H.M.; Cruijssen, F.C.A.M.; Fleuren, H.A.; de Koster, M.B.M.

    2004-01-01

    Factory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution.Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers.Owing to both the asymmetry in the distribution networks (the supplier

  13. Development of a Cooperative Retailing Program for the Disadvantaged.

    Science.gov (United States)

    Litzinger, F. Donald; And Others.

    This report presents a two-year junior college retailing curriculum for the disadvantaged, proposed on the basis of answers to questionnaires sent to retailing industries in the Metropolitan Rochester area. The questionnaires were designed to assess the need and feasibility of such a retailing program and to ascertain qualifications required to…

  14. Effects of leptin treatment and Western diet on wheel running in selectively bred high runner mice.

    Science.gov (United States)

    Meek, Thomas H; Dlugosz, Elizabeth M; Vu, Kim T; Garland, Theodore

    2012-05-15

    The role of leptin in regulating physical activity is varied. The behavioral effects of leptin signaling depend on the type of activity and the animal's physiological state. We used mice from lines selectively bred for high voluntary wheel running to further study how leptin regulates volitional exercise. Mice from four replicate high runner (HR) lines typically run ~3-fold more revolutions per day than those from four non-selected control (C) lines. HR mice have altered dopamine function and differences from C in brain regions known to be important in leptin-mediated behavior. Furthermore, male HR mice have been found to dramatically increase running when administered Western diet, an effect possibly mediated through leptin signaling. Male mice from generation 61 (representing three HR lines and one C line) were allowed wheel access at 24 days of age and given either Western diet (high in fat and with added sucrose) or standard chow. After four weeks, Western diet significantly increased circulating leptin, insulin, C-peptide, gastric inhibitory polypeptide, and inflammatory hormone resistin concentrations in HR mice (C mice not measured). Western diet increased running in HR mice, but did not significantly affect running in C mice. During the fifth week, all mice received two days of intra-peritoneal sham injections (physiological saline) followed by three days of murine recombinant leptin injections, and then another six days of sham injections. Leptin treatment significantly decreased caloric intake (adjusted for body mass) and body mass in all groups. Wheel running significantly increased with leptin injections in HR mice (fed Western or standard diet), but was unaffected in C mice. Whether Western diet and leptin treatment stimulate wheel running in HR mice through the same physiological pathways awaits future study. These results have implications for understanding the neural and endocrine systems that control locomotor activity, food consumption, and body

  15. Blocking of conditioned taste avoidance induced by wheel running.

    Science.gov (United States)

    Pierce, W David; Heth, C Donald

    2010-01-01

    In Experiment 1, compared to non-reinforced presentation of a food stimulus (A-->no US), the association of a food stimulus with wheel running (A-->US) blocked subsequent avoidance of a distinctive flavor (X), when both the food and flavor were followed by wheel running (AX-->US). Experiment 2 replicated and extended the blocking effect, demonstrating that the amount of avoidance of X after AX-->wheel training depended on the correlation between A-alone trials and wheel running-the predictiveness of the A stimulus. The present study is the first to demonstrate associative blocking of conditioned taste avoidance (CTA) induced by wheel running and strongly implicates associative learning as the basis for this kind of avoidance. 2009 Elsevier B.V. All rights reserved.

  16. Control of wheeled mobile robot in restricted environment

    Science.gov (United States)

    Ali, Mohammed A. H.; En, Chang Yong

    2018-03-01

    This paper presents a simulation and practical control system for wheeled mobile robot in restricted environment. A wheeled mobile robot with 3 wheels is fabricated and controlled by proportional derivative active force control (PD-AFC) to move in a pre-planned restricted environment to maintain the tracking errors at zero level. A control system with two loops, outer by PD controller and inner loop by Active Force Control, are designed to control the wheeled mobile robot. Fuzzy logic controller is implemented in the Active force Control to estimate the inertia matrix that will be used to calculate the actual torque applied on the wheeled mobile robot. The mobile robot is tested in two different trajectories, namely are circular and straight path. The actual path and desired path are compared.

  17. A fully omnidirectional wheeled assembly for robotic vehicles

    International Nuclear Information System (INIS)

    Killough, S.M.; Pin, F.G.

    1990-01-01

    A large number of wheeled or tracked platform mechanisms have been studied and developed to provide their mobility capability to teleoperated and autonomous robot vehicles. This paper presents an original wheeled platform based on an orthogonal wheel assembly that provides a full (three-degrees-of-freedom) omnidirectionality of the platform without wheel slippage and with the capability for simultaneous motions in rotation and translation (including sideways movements). A schematic of the basic wheel assembly is shown. The motion of the assembly is unconstrained (freewheeling) in the direction parallel to the main assembly shaft, while it is constrained in the direction perpendicular to the shaft, being driven in this direction by rotation of the shaft. A prototype platform was constructed to demonstrate the feasibility of this new concept

  18. Nonlinear analysis of the GFRP material wheel hub

    Directory of Open Access Journals (Sweden)

    Dong Yun-Feng

    2015-01-01

    Full Text Available In this paper, the current bicycle wheel was replaced by the ones which composed by the wheel hub with Glassfiber Reinforced Plastic (alkali free thin-walled cylinder material, hereinafter referred to as GFRP material and the protective components made up of rubber outer pneumatic pad. With the help of the basic theory of elastic-plastic mechanics, the finite element “Nonlinear buckling” analysis of the wheel was carried out. The results show that the maximum elastic deformation of the wheel hub and the critical value of buckling failure load were restricted by the elasticity under the condition of external loads. Considering with the tensile strength and elastic modulus of the GFRP value of the material, it is demonstrated that the material is feasible to be used for wheel hub.

  19. Analysis of wheel rim - Material and manufacturing aspects

    Science.gov (United States)

    Misra, Sheelam; Singh, Abhiraaj; James, Eldhose

    2018-05-01

    The tire in an automobile is supported by the rim of the wheel and its shape and dimensions should be adjusted to accommodate a specified tire. In this study, a tire of car wheel rim belonging to the disc wheel category is considered. Design is an important industrial operation used to define and specify the quality of the product. The design and modelling reduces the risk of damage involved in the manufacturing process. The design performed on this wheel rim is done on modelling software. After designing the model, it is imported for analysis purposes. The analysis software is used to calculate the different types of force, stresses, torque, and pressures acting upon the rim of the wheel and it reduces the time spent by a human for mathematical calculations. The analysis carried out considers two different materials namely structural steel and aluminium. Both materials are analyzed and their performance is noted.

  20. The effect of wheel eccentricity and run-out on grinding forces, waviness, wheel wear and chatter

    OpenAIRE

    O'DONNELL, GARRET; MURPHY, STUART

    2011-01-01

    PUBLISHED The effect of grinding-wheel eccentricity on grinding forces, wheel wear and final waviness height was studied. Eccentricity was evident in force oscillations and acceleration and audio measurements. A model was developed to predict final scallop-profile shape from grinding parameters and eccentricity. Recommendations are given on detecting eccentricity and determining when eccentricity is tolerable.

  1. Grinding Characteristics Of Directionally Aligned SiC Whisker Wheel-Comparison With Al2O3 Fiber Wheel

    Institute of Scientific and Technical Information of China (English)

    魏源迁; 山口胜美; 菊泽贤二; 洞口严; 中根正喜

    2003-01-01

    A unique SiC whisker wheel was invented,in which the whiskers were aligned normally to the grinding wheel surface.In this paper,grindabilities of the SiC whisker wheel are investigated and compared with those of other wheels of SiC grains,Al2O3 grains,as well as Al2O3 long and short fibres which were also aligned normally to the grinding wheel surface,respectively.The main research contents concern grinding characteristics of a directionally aligned SiC whisker wheel such as material-removal volume,wheel-wear rates,integrity of the ground surfaces,grinding ratios and grinding efficiency.Furthermore,grinding wheels of whiskers and fibres have a common disadvantage:they tend to load easily.The authors have proposed a simple method of loading-free grinding to overcome this propensity and investigate some related grinding characteristics under loading-free grinding conditions.

  2. Installation of the first of the big wheels of the ATLAS muon spectrometer, a thin gap chamber (TGC) wheel

    CERN Multimedia

    Claudia Marcelloni

    2006-01-01

    The muon spectrometer will include four big moving wheels at each end, each measuring 25 metres in diameter. Of the eight wheels in total, six will be composed of thin gap chambers for the muon trigger system and the other two will consist of monitored drift tubes (MDTs) to measure the position of the muons

  3. The influence of friction coefficient and wheel/rail profiles on energy dissipation in the wheel/rail contact

    NARCIS (Netherlands)

    Idarraga Alarcon, G.A.; Burgelman, N.D.M.; Meza Meza, J.; Toro, A.; Li, Z.

    2015-01-01

    This work investigates the energy dissipation in a wheel/rail system through friction work modeling. In order to identify the effect of the friction coefficient on the energy dissipation in the wheel/rail contact, several simulations were performed using a 3D multibody model of a railway vehicle

  4. 77 FR 70478 - RG Steel Wheeling, LLC, Wheeling Office, A Division Of RG Steel, LLC, Including On-Site Leased...

    Science.gov (United States)

    2012-11-26

    ... Unlimited and Green Energy Initiatives LLC, Including Workers Whose Wages Were Reported Through Severstal..., Wheeling Office, a division of RG Steel, LLC, including on-site leased workers from Pro Unlimited and Green Energy Initiatives, LLC, Wheeling, West Virginia (TA-W-81,880) and Mountain State Carbon, LLC, including...

  5. Cost reduction analysis in the online retail as compared to the classic retail

    Directory of Open Access Journals (Sweden)

    Mirela Camelia BABA

    2015-06-01

    Full Text Available The industry of retail was segmented by new technologies, but the financial performance of every segment is far to explain the market share. An exploratory study is necessary in order to explain the appeal for entrepreneurs. A comparison between two new forms of retail is used to understand the business models in this industry. Due to the fact that the maturity of the new segment of retail are different in various countries, the study cases focused on the some leaders firms from USA, China and Romania are important to design a probable trend the online commerce. General theoretical benchmarks, validated by current practice are used in case studies, as well as innovative approaches and well-known examples of successful retail companies.

  6. Making working in retailing interesting: A study of human resource management practices in Danish grocery retail chains

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G.; Buck, Nuka

    In this paper we investigate the human resource management practices of five Danish grocery retail chains from the perspective of both retailers and employees. We present an analytical framework for analysing the social and institutional context of Danish retailing and interpret our case study...

  7. Private Equity for Retail Investors : How to efficiently involve Finnish retail investors in private equity

    OpenAIRE

    Moita, Angelo

    2017-01-01

    Private equity has been the best performing asset class for institutional investors. Meanwhile, retail investors have been left out from the asset class for several reasons, such as legislation and wealth profiling. This study aims at assessing the types of private equity vehicles that could be the most appropriate for Finnish retail investors. The study solely focuses on the investment opportunities, hence it does not cover investment behaviour. Private equity should not be a primary as...

  8. Retail environments and spatial shopping behavior

    NARCIS (Netherlands)

    Timmermans, H.J.P.; Gaerling, T.; Golledge, R.G.

    1993-01-01

    The interplay between aspects of retail environments and consumer spatial shopping behavior has traditionally been an area of major concern in geography, urban planning and related disciplines. It reflects an interest in explaining the relationship between locational and nonlocational attributes of

  9. Retail inventory management with lost sales

    NARCIS (Netherlands)

    Curseu - Stefanut, A.

    2012-01-01

    The inventory control problem of traditional store-based grocery retailers has several challenging features. Demand for products is stochastic, and is typically lost when no inventory is available on the shelves. As the consumer behavior studies reveal, only a small percentage of customers are

  10. Italian retail gasoline activities: inadequate distribution network

    International Nuclear Information System (INIS)

    Verde, Stefano

    2005-01-01

    It is common belief that competition in the Italian retail gasoline activities is hindered by oil companies' collusive behaviour. However, when developing a broader analysis of the sector, low efficiency and scarce competition could results as the consequences coming from an inadequate distribution network and from the recognition of international markets and focal point [it

  11. Campylobacter prevalence in retail chicken liver

    Science.gov (United States)

    Foodborne campylobacteriosis has been linked to undercooked chicken liver. It is unknown how commonly chicken livers are contaminated with Campylobacter. The objective of this study was to determine the prevalence of Campylobacter on chicken livers available at retail. For each of five weeks, t...

  12. Student Guide Presentation Retail Marketing (Merchandising)

    OpenAIRE

    Juan Vigaray, María Dolores de

    2010-01-01

    La asignatura se imparte íntegramente en inglés. Presentación de la asignatura RETAIL MARKETING con los contenidos, requisitos, métodos y técnicas de aprendizaje, sistema de evaluación, trabajo a realizar.

  13. Customer loyalty of retail firm - Billa

    OpenAIRE

    Dančevská, Ráchel

    2009-01-01

    The bachelor thesis results from marketing, which includes customer loyalty and consumer typology. Then the thesis is concerned with a marketing research and a proper creation of a questionnaire for this research. The practical part of the thesis introduces the retail company Billa and presents the results from field research, which was focused on finding of customer loyalty of the Billa's customers.

  14. Management economics in a large retail company

    NARCIS (Netherlands)

    W.S. Siebert (W. Stanley); N.V. Zubanov (Nick)

    2010-01-01

    textabstractWe use unique data from 245 stores of a UK retailer to study links among middle (store) manager skills, sales, and manager pay. We find that, of the six management practice areas surveyed, the most important is "commercial awareness," where abler managers achieve up to 13.9% higher sales

  15. Retail Trade. Industry Training Monograph No. 7.

    Science.gov (United States)

    Dumbrell, Tom

    Australia's retailing sector is the largest single industry of employment, with more than 1.2 million workers. It is characterized by high levels of part-time and casual employment; a young work force, including many young people still in full-time education; and employment widely distributed geographically. Over the past 10 years, employment has…

  16. The old pillars of new retailing.

    Science.gov (United States)

    Berry, L L

    2001-04-01

    Despite the harsh realities of retailing, the illusion persists that magical tools can help companies overcome the problems of fickle consumers, price-slashing competitors, and mood swings in the economy. Such wishful thinking holds that retailers will thrive if only they communicate better with customers through e-mail, employ hidden cameras to learn how customers make purchase decisions, and analyze scanner data to tailor special offers and manage inventory. But the truth is, there are no quick fixes. In the course of his extensive research on dozens of retailers, Leonard Berry found that the best companies create value for their customers in five interlocking ways. Whether you're running a physical store, a catalog business, an e-commerce site, or a combination of the three, you have to offer your customers superior solutions to their needs, treat them with respect, and connect with them on an emotional level. You also have to set prices fairly and make it easy for people to find what they need, pay for it quickly, and then move on. None of these pillars is new, and each sounds exceedingly simple, but don't be fooled--implementing these axioms in the real world is surprisingly difficult. The author illustrates how some retailers have built successful operations by attending to these commonsense ways of dealing with their customers and how others have failed to do so.

  17. Ethical Dilemmas in Retail Merchandising: Student Perceptions

    Science.gov (United States)

    Paulins, V. Ann; Lombardy, Lisa

    2005-01-01

    Ethical dilemmas observed by students in retailing internships were the basis for a survey in which students indicated their perceptions as to whether case situations involved unethical behavior. Expanded case situations were offered to students for further exploration. The specific questions posed in this study included the following: (1) In what…

  18. Nudging consumer behaviour in retail stores

    DEFF Research Database (Denmark)

    Adam, Abdulfatah

    2016-01-01

    -effectiveness of alternative interventions in retail store settings. In cooperation with a supermarket chain in Denmark, we manipulated food locations inside the store so that relatively low energy dense products were placed favorable shelf locations. The underlying theory for the experiment was the behavioral approach (so...

  19. Virtual Retail Simulations in Second Life

    Science.gov (United States)

    Drake-Bridges, Erin; Strelzoff, Andrew; Sulbaran, Tulio

    2011-01-01

    This paper explores the use of simulations in virtual reality to teach students the fundamental processes behind retailing and product development. The project described involved one class of students who developed their own clothing lines of "virtual merchandise." A second class of students then "purchased" the wholesale…

  20. Internet Retailing as a Marketing Strategy

    NARCIS (Netherlands)

    M.C.W. Janssen (Maarten); R. van der Noll

    2005-01-01

    textabstractWe analyze the incentives for incumbent bricks-and-mortar firms and new entrants to start an online retail channel in a differentiated goods market. To this end we set up a two-stage model where firms first decide whether or not to build the infrastructure necessary to start an online

  1. IMPACT OF GLOBALIZATION ON RETAILING IN CROATIA

    Directory of Open Access Journals (Sweden)

    Sandra Mrvica MAĐARAC

    2017-05-01

    Full Text Available Trade is one of the leading sectors of the Croatian economy, which has undergone significant changes under the influence of globalization over the last decade. According to Central Bureau of Statistics in Croatia about 16 % of all employees work in trade business, and more than a quarter of business entities are registered in this sector. Therefore the trade has a significant share in Croatian GDP creation. Globalization is considered an important factor of economic development around the world. Through development of communication technology the world has become integrated into the "global village" and a business contact itself can be accomplished in a matter of minutes. The effects of globalization on retailing in Croatia are mostly reflected in the introduction of new retailing forms, development of e-commerce, consumer protection, the introduction of space management, changes in consumer habits and the arrival of multinational trading companies on the market of Croatia. In this way, the Croatian market has become a part of a single system. Globalization has a negative effect on trade in the Republic of Croatia too, because the domestic production and retail sales of small neighborhood stores are threatened in this way. Retailing in Croatia should make an attempt to adapt to the global trends in the world and to new changes taking into account the domestic production by the principle of comparative advantage.

  2. Sustainability in retailing – a summative content analysis

    DEFF Research Database (Denmark)

    Wiese, Anne; Kellner, Julian; Lietke, Britta

    2012-01-01

    and industrial branches in the sustainability literature relevant to retail supply chains, and sustainability considerations in retail practice. Findings – Sustainability-related issues have been discussed for many years and the term sustainability has received increased attention in research since the mid-1990s....... In retail research, there seems to be a time lag of more than ten years in using the term sustainability compared to other fields in research and industry. However, some of these other research fields and industries have an impact on retail supply chains. At the same time, it seems that sustainability has...... and industries relevant to retail supply chains....

  3. Sales Forecasting for Fashion Retailing Service Industry: A Review

    Directory of Open Access Journals (Sweden)

    Na Liu

    2013-01-01

    Full Text Available Sales forecasting is crucial for many retail operations. It is especially critical for the fashion retailing service industry in which product demand is very volatile and product’s life cycle is short. This paper conducts a comprehensive literature review and selects a set of papers in the literature on fashion retail sales forecasting. The advantages and the drawbacks of different kinds of analytical methods for fashion retail sales forecasting are examined. The evolution of the respective forecasting methods over the past 15 years is revealed. Issues related to real-world applications of the fashion retail sales forecasting models and important future research directions are discussed.

  4. Perspectives of retailers and local food suppliers on the evolution of modern retail in Africa

    DEFF Research Database (Denmark)

    Kuada, John Ernest; Nandonde, Felix Adamu

    2018-01-01

    Purpose: The purpose of this paper is to present the findings of an exploratory qualitative study of the evolution of modern food retailing in Tanzania ( from both retailers and suppliers’ perspectives). Design/methodology/approach – The qualitative case approach was used in this study. Participa......Purpose: The purpose of this paper is to present the findings of an exploratory qualitative study of the evolution of modern food retailing in Tanzania ( from both retailers and suppliers’ perspectives). Design/methodology/approach – The qualitative case approach was used in this study...... factors that account for the evolution of modern food retail in the country were identified. These are availability of suppliers, acceptance of trade credit, innovation, lifestyle change, institutional support, convenience, and availability of consumers. Originality/value – The study has expanded...... the knowledge of the evolution ofmodern food retail in developing economies by using the relationship marketing theory. Furthermore, the study employed some major actors in the food value chain to understand determinant factors that accelerated the evolution of supermarkets in Tanzania....

  5. Dynamic motion stabilization for front-wheel drive in-wheel motor electric vehicles

    Directory of Open Access Journals (Sweden)

    Jia-Sheng Hu

    2015-12-01

    Full Text Available This article presents a new dynamic motion stabilization approach to front-wheel drive in-wheel motor electric vehicles. The approach includes functions such as traction control system, electronic differential system, and electronic stability control. The presented electric vehicle was endowed with anti-skid performance in longitudinal accelerated start; smooth turning with less tire scrubbing; and safe driving experience in two-dimensional steering. The analysis of the presented system is given in numerical derivations. For practical verifications, this article employed a hands-on electric vehicle named Corsa-electric vehicle to carry out the tests. The presented approach contains an integrated scheme which can achieve the mentioned functions in a single microprocessor. The experimental results demonstrated the effectiveness and feasibility of the presented methodology.

  6. Energy consumption and conservation in food retailing

    International Nuclear Information System (INIS)

    Tassou, S.A.; Ge, Y.; Hadawey, A.; Marriott, D.

    2011-01-01

    The total annual CO 2 emissions associated with the energy consumption of the major retail food outlets in the UK amount to around 4.0 MtCO 2 . The energy consumption and emissions from supermarkets varies widely and can depend on many factors such as the type and size of the store, business and merchandising practices and refrigeration and environmental control systems used. This paper provides energy consumption data of a sample of 2570 retail food stores from a number of major retail food chains in the UK. The sample covers all major store categories from convenience stores to hypermarkets and includes approximately 30% of the total number of stores in the UK having a net sales area more than 280 m 2 . The data show a wide variability of energy intensity even within stores of the same retail chain. A power law can be used to describe the variation of the average electrical energy intensity of the stores in the sample with sales area. If the electrical intensity of the stores above the average is reduced to the average by energy conservation measures, annual energy savings of the order of 10% or 840 GWh can be achieved representing 355,000 tonnes annual reduction in CO 2 emissions. The paper also discusses the major energy consuming processes in retail food stores and identifies opportunities for energy savings. - Research highlights: → Energy consumption by supermarkets in the UK is significant and a wide variability exists between stores of similar size. → Energy conservation measures to reduce energy consumption of individual stores to the average can produce a0% energy savings. → Significant opportunities for energy savings exist from the integration of HVAC and refrigeration equipment.

  7. Habituation contributes to the decline in wheel running within wheel-running reinforcement periods.

    Science.gov (United States)

    Belke, Terry W; McLaughlin, Ryan J

    2005-02-28

    Habituation appears to play a role in the decline in wheel running within an interval. Aoyama and McSweeney [Aoyama, K., McSweeney, F.K., 2001. Habituation contributes to within-session changes in free wheel running. J. Exp. Anal. Behav. 76, 289-302] showed that when a novel stimulus was presented during a 30-min interval, wheel-running rates following the stimulus increased to levels approximating those earlier in the interval. The present study sought to assess the role of habituation in the decline in running that occurs over a briefer interval. In two experiments, rats responded on fixed-interval 30-s schedules for the opportunity to run for 45 s. Forty reinforcers were completed in each session. In the first experiment, the brake and chamber lights were repeatedly activated and inactivated after 25 s of a reinforcement interval had elapsed to assess the effect on running within the remaining 20 s. Presentations of the brake/light stimulus occurred during nine randomly determined reinforcement intervals in a session. In the second experiment, a 110 dB tone was emitted after 25 s of the reinforcement interval. In both experiments, presentation of the stimulus produced an immediate decline in running that dissipated over sessions. No increase in running following the stimulus was observed in the first experiment until the stimulus-induced decline dissipated. In the second experiment, increases in running were observed following the tone in the first session as well as when data were averaged over several sessions. In general, the results concur with the assertion that habituation plays a role in the decline in wheel running that occurs within both long and short intervals. (c) 2004 Elsevier B.V. All rights reserved.

  8. Interaction among actors in retail market competition in malang city

    Science.gov (United States)

    Kurniawan, B.; Ma'ruf, M. F.

    2018-01-01

    In several countries, traditional market lose in competition with supermarket. Supermarket has several advantages compared with traditional market. It can provides consumers with lower prices, offer more varieties of products and higher quality products than traditional retailers, has more comfortable place for shopping. In Malang City, the existence of traditional traders was threatened. In a competitive retail market, traditional traders get less protection from the Government of Malang Municipality. Massive demonstrations conducted by traditional traders along with other society elements unable to stem the rapid growth of modern retail. This paper focus on the interaction of Malang Municipality actors in the local retail market competition. How those interaction can make imbalance retail market competition. The author uses descriptive-analytic method with a qualitative approach in this work. As a result, the interaction tend to produce imbalance retail market competition. Interaction between legislative, executive, bureaucracy and mass media tend to support modern retail growth than traditional one.

  9. Determining Spacecraft Reaction Wheel Friction Parameters

    Science.gov (United States)

    Sarani, Siamak

    2009-01-01

    Software was developed to characterize the drag in each of the Cassini spacecraft's Reaction Wheel Assemblies (RWAs) to determine the RWA friction parameters. This tool measures the drag torque of RWAs for not only the high spin rates (greater than 250 RPM), but also the low spin rates (less than 250 RPM) where there is a lack of an elastohydrodynamic boundary layer in the bearings. RWA rate and drag torque profiles as functions of time are collected via telemetry once every 4 seconds and once every 8 seconds, respectively. Intermediate processing steps single-out the coast-down regions. A nonlinear model for the drag torque as a function of RWA spin rate is incorporated in order to characterize the low spin rate regime. The tool then uses a nonlinear parameter optimization algorithm based on the Nelder-Mead simplex method to determine the viscous coefficient, the Dahl friction, and the two parameters that account for the low spin-rate behavior.

  10. Rover's Wheel Churns Up Bright Martian Soil

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Spirit acquired this mosaic on the mission's 1,202nd Martian day, or sol (May 21, 2007), while investigating the area east of the elevated plateau known as 'Home Plate' in the 'Columbia Hills.' The mosaic shows an area of disturbed soil, nicknamed 'Gertrude Weise' by scientists, made by Spirit's stuck right front wheel. The trench exposed a patch of nearly pure silica, with the composition of opal. It could have come from either a hot-spring environment or an environment called a fumarole, in which acidic, volcanic steam rises through cracks. Either way, its formation involved water, and on Earth, both of these types of settings teem with microbial life. Spirit acquired this mosaic with the panoramic camera's 753-nanometer, 535-nanometer, and 432-nanometer filters. The view presented here is an approximately true-color rendering.

  11. Design of two wheel self balancing car

    Science.gov (United States)

    He, Chun-hong; Ren, Bin

    2018-02-01

    This paper proposes a design scheme of the two-wheel self-balancing dolly, the integration of the gyroscope and accelerometer MPU6050 constitutes the car position detection device.System selects 32-bit MCU stmicroelectronics company as the control core, completed the processing of sensor signals, the realization of the filtering algorithm, motion control and human-computer interaction. Produced and debugging in the whole system is completed, the car can realize the independent balance under the condition of no intervention. The introduction of a suitable amount of interference, the car can adjust quickly to recover and steady state. Through remote control car bluetooth module complete forward, backward, turn left and other basic action..

  12. The Wheeling and Transmission Manual, Second Edition

    International Nuclear Information System (INIS)

    Weiss, L.; Spiewak, S.

    1991-01-01

    The Wheeling and Transmission Manual addresses the key issues involved in the debate: the need for coordination, the extent to which access should be permitted, various pricing methodologies which might be employed, obstacles to the addition of new transmission capacity, and contractual matters which should be considered in negotiations between the parties. As one shall see, these matters are all interrelated and the resolution of any of them may affect the outcome of the others. The Manual is designed to give an overview of the issues involved. It is not intended exclusively for the expert engineer or attorney, although both might benefit from it. Rather, the Manual was written with the objective of providing decisionmakers and policymakers with detailed, timely and understandable materials to evaluate the specific circumstances affecting their companies. Each chapter of the book is indexed separately

  13. Infinity properads and infinity wheeled properads

    CERN Document Server

    Hackney, Philip; Yau, Donald

    2015-01-01

    The topic of this book sits at the interface of the theory of higher categories (in the guise of (∞,1)-categories) and the theory of properads. Properads are devices more general than operads, and enable one to encode bialgebraic, rather than just (co)algebraic, structures.   The text extends both the Joyal-Lurie approach to higher categories and the Cisinski-Moerdijk-Weiss approach to higher operads, and provides a foundation for a broad study of the homotopy theory of properads. This work also serves as a complete guide to the generalised graphs which are pervasive in the study of operads and properads. A preliminary list of potential applications and extensions comprises the final chapter.   Infinity Properads and Infinity Wheeled Properads is written for mathematicians in the fields of topology, algebra, category theory, and related areas. It is written roughly at the second year graduate level, and assumes a basic knowledge of category theory.

  14. Security of supply and retail competition in the European gas market

    Energy Technology Data Exchange (ETDEWEB)

    Abada, Ibrahim, E-mail: ibrahim.abada@polytechnique.edu [IFP Energies nouvelles, 1 et 4 avenue de Bois Preau, 92852 Rueil-Malmaison (France); EDF Research and Development, 1 avenue du General de Gaulle, 92140 Clamart (France); EconomiX-CNRS, University of Paris Ouest (France); Massol, Olivier, E-mail: olivier.massol@ifpen.fr [Center for Economics and Management, IFP School, 228-232 av. Napoleon Bonaparte, 92852 Rueil-Malmaison (France); Department of Economics, City University London, Northampton Square, London EC1V 0HB (United Kingdom)

    2011-07-15

    In this paper, we analyze the impact of uncertain disruptions in gas supply upon gas retailer contracting behavior and consequent price and welfare implications in a gas market characterized by long-term gas contracts using a static Cournot model. In order to most realistically describe the economical situation, our representation divides the market into two stages: the upstream market that links, by means of long-term contracts, producers in exporting countries (Russia, Algeria, etc.) to local retailers who bring gas to the consuming countries to satisfy local demands in the downstream market. Disruption costs are modeled using short-run demand functions. First we mathematically develop a general model and write the associated KKT conditions, then we propose some case studies, under iso-elasticity assumptions, for the long-short-run inverse-demand curves in order to predict qualitatively and quantitatively the impacts of supply disruptions on Western European gas trade. In the second part, we study in detail the German gas market of the 1980s to explain the supply choices of the German retailer, and we derive interesting conclusions and insights concerning the amounts and prices of natural gas brought to the market. The last part of the paper is dedicated to a study of the Bulgarian gas market, which is greatly dependent on the Russian gas supplies and hence very sensitive to interruption risks. Some interesting conclusions are derived concerning the necessity to economically regulate the market, by means of gas amounts control, if the disruption probability is high enough. - Highlights: > We model retail competition using a Nash-Cournot framework. > Risk-neutral retailers decide their import policy among a set of risky producers. > Case 1: the German gas trade of the 1980s to understand the gas sources' choices. > Case 2: the current Bulgarian gas trade to study the market properties. > Conclusions about the market regulation for welfare optimization reasons.

  15. Security of supply and retail competition in the European gas market

    International Nuclear Information System (INIS)

    Abada, Ibrahim; Massol, Olivier

    2011-01-01

    In this paper, we analyze the impact of uncertain disruptions in gas supply upon gas retailer contracting behavior and consequent price and welfare implications in a gas market characterized by long-term gas contracts using a static Cournot model. In order to most realistically describe the economical situation, our representation divides the market into two stages: the upstream market that links, by means of long-term contracts, producers in exporting countries (Russia, Algeria, etc.) to local retailers who bring gas to the consuming countries to satisfy local demands in the downstream market. Disruption costs are modeled using short-run demand functions. First we mathematically develop a general model and write the associated KKT conditions, then we propose some case studies, under iso-elasticity assumptions, for the long-short-run inverse-demand curves in order to predict qualitatively and quantitatively the impacts of supply disruptions on Western European gas trade. In the second part, we study in detail the German gas market of the 1980s to explain the supply choices of the German retailer, and we derive interesting conclusions and insights concerning the amounts and prices of natural gas brought to the market. The last part of the paper is dedicated to a study of the Bulgarian gas market, which is greatly dependent on the Russian gas supplies and hence very sensitive to interruption risks. Some interesting conclusions are derived concerning the necessity to economically regulate the market, by means of gas amounts control, if the disruption probability is high enough. - Highlights: → We model retail competition using a Nash-Cournot framework. → Risk-neutral retailers decide their import policy among a set of risky producers. → Case 1: the German gas trade of the 1980s to understand the gas sources' choices. → Case 2: the current Bulgarian gas trade to study the market properties. → Conclusions about the market regulation for welfare optimization

  16. The sensory wheel of virgin olive oil

    Directory of Open Access Journals (Sweden)

    Mojet, Jos

    1994-04-01

    Full Text Available During a 3-year FLAIR study extra virgin olive oils, varying in species, degree of ripeness and extraction method, were evaluated by 6 different institutes according to QDA or GDI-methods in order to identify parameters related to the quality of extra virgin olive oil. The current COI-method yields a poor between-panel reproducibility. This could well be caused by a difference in the perception of positive quality aspects. Whereas the QDA-method is especially suitable for determining sensory profiles according to the perception of the consumer, the COI-method should be tailored to detect possible defects only.
    In order to cluster all attributes to one condensed set of sensory attributes for describing virgin olive oil, the COI and QDA data of ail panels were pooled and analyzed separately for appearance, texture and flavour. This approach resulted in a set of 3 appearance, 3 texture and 12 flavour descriptors which can be conveniently represented graphically in the form of a "sensory wheel".
    On the basis of the findings it is recommended to base the "extra virgin" qualification for olive oils solely on the absence of defects. The between-panel reproducibility of such a simplified COI-test can be assessed by means of ring tests and improved by training with reference products. When an oil passes this screening it can be profiled subsequently using the attributes of the sensory wheel. Such a profile can be linked to preferential profiles derived from consumer studies enabling the production of most preferred olive oils.

  17. Diagnostics of the wheel thread of railway rolling stock

    Directory of Open Access Journals (Sweden)

    S. Yu. Buryak

    2013-02-01

    Full Text Available Purpose. At present, the devastating impact of faulty wheels on rails on the move is a major problem of railway transport. This factor is one of the most important, which causes the shift from traditional manual methods of verification and external examination to the automated diagnostic system of rolling stock in operation. Methodology. To achieve this goal the main types of wheel damages and the way they appear are analyzed. The methods for defects and abnormalities of the wheel thread determining as well as their advantages and disadvantages were presented. Nowadays these methods are under usage in both the international practice and in the one of the CIS countries. Findings. The faulty wheel sound on the move was researched and analyzed. The necessity of using the automated system, enabling one to reduce significantly the human factor is substantiated. Originality. The method to determine the wheel thread damage on the basis of a sound diagnostic is proposed. Practical value. Automatic tracking system of the wheels condition allows performing their more qualitative diagnostics, detecting a fault at the early stage and forecasting the rate of its extension. Besides detecting the location of the faulty wheel in the rolling stock, it is also possible to trace the dynamics of the fault extension and to give the recommendations on how to eliminate it.

  18. Pre-exposure to wheel running disrupts taste aversion conditioning.

    Science.gov (United States)

    Salvy, Sarah-Jeanne; Pierce, W David; Heth, Donald C; Russell, James C

    2002-05-01

    When rats are given access to a running wheel after drinking a flavored solution, they subsequently drink less of that flavor solution. It has been suggested that running produces a conditioned taste aversion (CTA). This study explored whether CTA is eliminated by prior exposure to wheel running [i.e., unconditioned stimulus (UCS) pre-exposure effect]. The rats in the experimental group (UW) were allowed to wheel run for 1 h daily for seven consecutive days of pre-exposure. Rats in the two other groups had either access to locked wheels (LW group) or were maintained in their home cages (HC group) during the pre-exposure days. All rats were then exposed to four paired and four unpaired trials using a "ABBAABBA" design. Conditioning trials were composed of one flavored liquid followed by 60-min access to wheel running. For the unpaired trials, rats received a different flavor not followed by the opportunity to run. All rats were then initially tested for water consumption followed by tests of the two flavors (paired or unpaired) in a counterbalanced design. Rats in the UW group show no CTA to the liquid paired with wheel running, whereas LW and HC groups developed CTA. These results indicate that pre-exposure to wheel running (i.e., the UCS), eliminates subsequent CTA.

  19. Wheel liner design for improved sound and structural performances

    Science.gov (United States)

    Oltean, Alexandru; Diaconescu, Claudiu; Tabacu, Ştefan

    2017-10-01

    Vehicle noise is composed mainly of wheel-road noise and noise from the power unit. At low speeds power unit noise dominates while at high speeds wheel-road noise dominates as wheel-road noise level increases approximately logarithmically with speed. The wheel liner is designed as a component of the vehicle that has a multiple role. It has to prevent the dirt or water from the road surface that are engaged by the wheel to access the engine/front bay. Same time it has the important role to reduce perceived noised in the passenger’s compartment that comes from the wheel-road interaction. Progress in plastic injection moulding technology allowed for new structures to be developed - nonwoven materials in combination with a PP based carrier structure which benefits from a cell structure caused by MuCell injection moulding. The results are light parts with increased sound absorption performances. An adapted combination of materials and production processes can provide the solution for stiff yet soundproofing structures valued for modern vehicles. Sound absorption characteristics of materials used for wheel liners applications were reported in this study. Different polypropylene and polyester fibre-based thermally bonded nonwovens varying in weight and thickness were investigated. Having as a background the performances of the nonwoven material the microcellular structure was part of the analysis. Acoustical absorptive behaviour was explained by analysing the results obtained using the impedance tube and correlating with the knowledge of materials structure.

  20. Low-cost real-time automatic wheel classification system

    Science.gov (United States)

    Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

    1992-11-01

    This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.