CERN Shuttles - Enlarged Regular Shuttle Services as from 8/02/2010
2010-01-01
As of Monday 8 February 2010, please note the enhancement of the regular shuttle services: - with now two shuttles dedicated to the transportation within and between both CERN sites, Meyrin and Prevessin with bus stop at more buildings - To and from the Geneva airport every hour (from building 500) to complement the TPG bus Y For timetable details, please click here: http://gs-dep.web.cern.ch/gs-dep/groups/sem/ls/RegularShuttleTimetable_Feb2010.htm GS-SEM
CERN Shuttles - NEW Regular Shuttle Services as from 11/01/2010
GS Department
2010-01-01
As of Monday 11 January a new regular shuttle service (from Monday to Friday) will be available to facilitate transportation: Within and between both CERN sites, Meyrin and Prevessin; To and from the following LHC points: ATLAS, ALICE, CMS, LHCb. For further details, please consult the timetable for this service. We should also like to take this opportunity to encourage you to use the new regular TPG Y bus service rather than the special on-demand CERN transport service to and from Geneva Airport whenever possible. The TPG buses run from 06:00 to 00:30. For further details, please consult the TPG timetable. Please do not hesitate to give us your feedback on the shuttle services: e-mail to veronique.marchal@cern.ch. In case of problems with the shuttles, please contact 75411. GS-SEM Group Infrastructure and General Services Department
New timetable for a Regular morning and evening shuttle
TS Department
2008-01-01
Starting from 31 March 2008, for one month, a new timetable for a regular morning and evening shuttle serving LHC Points 2 and 5 will be put in place. You can find all the corresponding details on the FM group WEB page: http://ts-dep.web.cern.ch/ts-dep/groups/fm/logistique/shuttle_timetable.htm Please note that during April, all other requests for transport from Meyrin and Prévessin to the LHC Points via tel. 76969 during the day (between 8:30 and 17:30) will not be met. TS/FM group Tel. 160239
New timetable for a morning and evening regular shuttle
TS Department
2008-01-01
Starting from the 31st of March 2008 and for one month, a new timetable for a morning and evening regular shuttle serving LHC Points 2 and 5, will be put in place. You can find all the corresponding details in the FM group WEB page http://ts-dep.web.cern.ch/ts-dep/groups/fm/logistique/shuttle_timetable.htm Please note that during April, every other request of transfer from Meyrin and Prevessin towards LHC Points reaching the 76969 during the day (between 8:30 and 17:30) will not be satisfied. TS/FM group 160239
New timetable for the CERN Shuttle service 2015
2014-01-01
Due to the reduction of operational budgets, please note that as from 5 January 2015: Circuit 1 (Meyrin) will not run during lunch; Circuit 2 (Prévessin) will run two more times each day; Circuit 6 will no longer run. For more information: http://cern.ch/ShuttleService. Departmental Administrative Office
Hubble Servicing Challenges Drive Innovation of Shuttle Rendezvous Techniques
Goodman, John L.; Walker, Stephen R.
2009-01-01
Hubble Space Telescope (HST) servicing, performed by Space Shuttle crews, has contributed to what is arguably one of the most successful astronomy missions ever flown. Both nominal and contingency proximity operations techniques were developed to enable successful servicing, while lowering the risk of damage to HST systems, and improve crew safety. Influencing the development of these techniques were the challenges presented by plume impingement and HST performance anomalies. The design of both the HST and the Space Shuttle was completed before the potential of HST contamination and structural damage by shuttle RCS jet plume impingement was fully understood. Relative navigation during proximity operations has been challenging, as HST was not equipped with relative navigation aids. Since HST reached orbit in 1990, proximity operations design for servicing missions has evolved as insight into plume contamination and dynamic pressure has improved and new relative navigation tools have become available. Servicing missions have provided NASA with opportunities to gain insight into servicing mission design and development of nominal and contingency procedures. The HST servicing experiences and lessons learned are applicable to other programs that perform on-orbit servicing and rendezvous, both human and robotic.
New works in space. [Space Shuttle based manufacturing and services
Kingsbury, J. E.
1978-01-01
Goods and services that may be furnished by the Space Shuttle are described. A single multibeam antenna array capable of supplying satellite communication for 256 U.S. cities, a disaster warning network, and a TV link to remote areas is discussed. Attention is also given to such materials processing programs as crystal growth (for example, production of mercuric iodide crystals for gamma-ray detectors), eutectic growth of solid-solution crystals such as mercury-cadmium-telluride, manufacture of uniform latex spheres for medical applications, and development of small glass spheres for fusion power applications. In addition to the Space Telescope, a meter-class telescope on the Shuttle and a wide-field survey instrument are under study.
dental services and attitudes towards its regular utilization among ...
responsible for 6.1million days of admission related ill health ... 2Department of Preventive Medicine and Primary Care, Faculty of the Clinical Sciences, University of Ibadan ... among civil servants and their attitudes towards its regular use.
41 CFR 301-10.420 - When may I use a taxi, shuttle service or other courtesy transportation?
2010-07-01
... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false When may I use a taxi... Courtesy Transportation § 301-10.420 When may I use a taxi, shuttle service or other courtesy... of official travel are reimbursable for the usual fare plus tip for use of a taxi, shuttle service or...
Benke, L.; Buocz, Z.
1985-01-01
The basic problems associated with the ventilation of diesel-powered self-propelled equipment used in underground mines are summarized. The composition of exhaust gases and its dependence on various conditions are investigated. After an overview of ventilation regulation rules, the principles of mine air volume determination are discussed. Next, the ventilation problems of diesel vehicles used for shuttle services are considered. The main results are presented in the form of diagrams for the determination of air volume and air flow.
Access to serviced land for the urban poor: the regularization paradox in Mexico
Alfonso Iracheta Cenecorta
2000-01-01
Full Text Available The insufficient supply of serviced land at affordable prices for the urban poor and the need for regularization of the consequent illegal occupations in urban areas are two of the most important issues on the Latin American land policy agenda. Taking a structural/integrated view on the functioning of the urban land market in Latin America, this paper discusses the nexus between the formal and the informal land markets. It thus exposes the perverse feedback effects that curative regularization policies may have on the process by which irregularity is produced in the first place. The paper suggests that a more effective approach to the provision of serviced land for the poor cannot be resolved within the prevailing (curative regularization programs. These programs should have the capacity to mobilize the resources that do exist into a comprehensive program that links regularization with fiscal policy, including the exploration of value capture mechanisms.
A mobile robot system for ground servicing operations on the space shuttle
Dowling, K.; Bennett, R.; Blackwell, M.; Graham, T.; Gatrall, S.; O'Toole, R.; Schempf, H.
1992-01-01
A mobile system for space shuttle servicing, the Tessellator, has been configured, designed and is currently being built and integrated. Robot tasks include chemical injection and inspection of the shuttle's thermal protection system. This paper outlines tasks, rationale, and facility requirements for the development of this system. A detailed look at the mobile system and manipulator follow with a look at mechanics, electronics, and software. Salient features of the mobile robot include omnidirectionality, high reach, high stiffness and accuracy with safety and self-reliance integral to all aspects of the design. The robot system is shown to meet task, facility, and NASA requirements in its design resulting in unprecedented specifications for a mobile-manipulation system.
2010-07-01
... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false How much will my agency reimburse me for a tip to a taxi, shuttle service, or courtesy transportation driver? 301-10.421 Section 301... tip to a taxi, shuttle service, or courtesy transportation driver? An amount which your agency...
Machado, Luciene Petcov; Camargo, Maria Beatriz Junqueira; Jeronymo, José Carlos Milanez; Bastos, Gisele Alsina Nader
2012-06-01
To estimate the prevalence of regular use of dental care services by adults and older adults residing in vulnerable community and to identify associated factors. A population-based cross-sectional study was carried out with 3,391 adults and older adults residing in areas of social vulnerability in Porto Alegre, Southern Brazil, from July to December of 2009. A systematic sampling method was used the selection probability proportional to the population of each of the the 121 census sectors. The outcome for regular use of dental care services was defined as regular use of dental services, regardless of the presence of dental problems. A standardized questionnaire was administered, which included demographic, socioeconomic, type of dental care services, self-perception of dental health and self-perceived needs variables. A chi-square test for heterogeneity was used for bivariate analyses, and a Poisson regression with a robust variance and Wald tests were performed for the adjusted analysis. The prevalence of regular use of dental services was 25.7%. The prevalence was higher among people with >12 years schooling (PR 2.48 [95%CI:1.96;3.15]), higher income (PR 1.95[95%CI: 1.03;1.53]), use of private health services (PR 1.43 [95%CI: 1.20;1.71]),excellent self-perceived oral health (PR 4.44 [95%CI: 3.07;6.42]) and a self-perceived need for consultation related to routine checkup (RP 2.13 [95%CI: 1.54;2.96]). Inequalities were found in the regular use of dental services. Integrated approaches that raise awareness of oral health, improve self-care and expand access to dental services, may contribute to increase the use of dental services on a regular basis.
Opportunistic Wireless Charging System Design for an On-Demand Shuttle Service
Meintz, Andrew; Doubleday, Kate; Markel, Tony
2016-06-29
System right-sizing is critical to the implementation of in-motion wireless power transfer (WPT) for electric vehicles. This study evaluates potential system designs for an on-demand employee shuttle by determining the required battery size based on the rated power at a variable number of charging locations. Vehicle power and state of charge are simulated over the drive cycle, based on position and velocity data at every second from the existing shuttle. Adding just one WPT location can halve the battery size. Many configurations are capable of self-sustaining with WPT, while others benefit from supplemental stationary charging.
McGlawn, Penny Ann
2010-01-01
The purpose of this study was to determine the perceptions of early and middle level childhood pre-service teachers concerning foster children's academic abilities and behaviors in a regular classroom. The participants consisted of a convenience sample of students from a junior level education class. The participants rated their degree of…
Open Cherry Picker simulation results. [manned platform for satellite servicing from Shuttle
Nathan, C. A.
1982-01-01
The Open Cherry Picker (OCP) is a manned platform, mounted at the end of the Remote Manipulator System (RMS), which is used to enhance extravehicular activities. The objective of the simulation program described was to reduce the existing complexity of those OCP design features that are mandatory for initial Space Shuttle applications. The OCP development test article consists of a torque box, a rotating foot restraint, a rotating stanchion that houses handholds, and a tool storage section with an interface with payload modules. If the size or complexity of the payload increases, payload handling devices may be added at a later data. The simulations have shown that the crew can control the RMS from the Aft Flight Deck of the Shuttle, using voice commands from the EVA crewman. No need for a stabilizer was evident, and RMS dynamics due to crew-induced workloads were found to be minor.
Md. Saiful Malak
2013-01-01
Full Text Available Inclusive education (IE has been recognized as a key strategy to ensure education for all in the developing world for the last two decades. As a developing country, Bangladesh is striving to address IE by undergoing various initiatives such as policy reform, awareness creation and teacher development. This paper based on a qualitative approach attempts to explore pre-service teachers’ responses to include students with special educational needs (SEN in regular classrooms in primary schools. A one-on-one interview was conducted with 20 pre-service teachers who were enrolled in a teacher education program of one public university in Bangladesh. The findings revealed from the study indicate that majority of the pre-service teachers have unfavourable attitudes to include students with SEN in regular classrooms. Misconception and lack of knowledge about disabilities are revealed from most of the pre-service teachers’ responses. Further large class size, high workloads, inflexible curriculum policy of primary education and inadequate experiential learning facilities of teacher education program are identified as barriers to IE reform. Several issues are discussed as implications in order to promote better inclusive practices in regular primary education.
An Opportunistic Wireless Charging System Design for an On-Demand Shuttle Service
Doubleday, Kate; Meintz, Andrew; Markel, Tony
2016-07-25
System right-sizing is critical to implementation of in-motion wireless power transfer (WPT) for electric vehicles. This study introduces a modeling tool, WPTSim, which uses one-second speed, location, and road grade data from an on-demand employee shuttle in operation to simulate the incorporation of WPT at fine granularity. Vehicle power and state of charge are simulated over the drive cycle to evaluate potential system designs. The required battery capacity is determined based on the rated power at a variable number of charging locations. Adding just one WPT location can more than halve the battery capacity needed. Many configurations are capable of being self sustaining with WPT, while others benefit from supplemental stationary charging.
An Opportunistic Wireless Charging System Design for an On-Demand Shuttle Service: Preprint
Doubleday, Kate; Meintz, Andrew; Markel, Tony
2016-08-01
System right-sizing is critical to implementation of in-motion wireless power transfer (WPT) for electric vehicles. This study introduces a modeling tool, WPTSim, which uses one-second speed, location, and road grade data from an on-demand employee shuttle in operation to simulate the incorporation of WPT at fine granularity. Vehicle power and state of charge are simulated over the drive cycle to evaluate potential system designs. The required battery capacity is determined based on the rated power at a variable number of charging locations. Adding just one WPT location can more than halve the battery capacity needed. Many configurations are capable of being self sustaining with WPT, while others benefit from supplemental stationary charging.
2007-01-01
Please note that, to improve the service we provide, a new telephone number - 72500 - has been set up for all shuttle requests concerning: journeys within the CERN site, i.e. official visits or bidders' conferences; journeys to or from the airport or city centre; long-distance journeys. However, it will still be possible to submit requests in writing to Fm.Support@cern. The radio taxi can also still be reached on 76969. The TS/FM group would also like to inform you that details of all light logistics services (transport of persons, distribution and collection of parcels up to 1 tonne, distribution and collection of mail) can be found on the group's website: http://ts-dep.web.cern.ch/ts-dep/groups/fm/fm.htm TS/FM Group 160239
Christensen, Lisa Bøge; Rosing, Kasper; Merete Lempert, Susanne
2016-01-01
OBJECTIVES: To describe the pattern of dental services provided to 64-65-year-old Danes who are regular users of dental care over a 5-year period, to analyse whether this pattern is associated with socio-demographic and/or socioeconomic factors, and if different uses of dental services are related......-sectional study of all aged 64-65 (n = 37 234) who received a dental examination in 2009 was conducted. Clinical data comprised dental services received under the National Health Insurance reimbursement scheme, dental status and DMFT. Geographical, socio-demographic and socioeconomic data derived from public...... and social area-based factors and to some degree gender, income, and education must be taken into consideration as all these factors seem to influence the future demand for dental services....
Comparison of inclusive practices of regular and special education services teachers in Mexico
García Cedillo, Ismael; Romero Rubio, Silvia; Flores Barrera, Vasthi Jocabed; Martínez Ramírez, Araceli; Rubio Rodríguez, Silviana
2015-01-01
Las prácticas inclusivas buscan atender a toda la población estudiantil, independientemente de sus características. En el presente artículo se comparan las prácticas docentes de escuelas regulares con apoyo de educación especial (ER-USAER) y las escuelas especiales, llamadas Centros de Atención Múltiple (CAM), para conocer dónde se le brinda una atención más inclusiva a la población infantil con discapacidad. Se trabajó con 15 docentes de CAM y 17 de ER-USAER de tres estados de México, a quie...
Areej M. Abduldaim
2013-01-01
Full Text Available We introduced and studied -regular modules as a generalization of -regular rings to modules as well as regular modules (in the sense of Fieldhouse. An -module is called -regular if for each and , there exist and a positive integer such that . The notion of -pure submodules was introduced to generalize pure submodules and proved that an -module is -regular if and only if every submodule of is -pure iff is a -regular -module for each maximal ideal of . Many characterizations and properties of -regular modules were given. An -module is -regular iff is a -regular ring for each iff is a -regular ring for finitely generated module . If is a -regular module, then .
Maria Beatriz J. Camargo
2009-09-01
Full Text Available O objetivo deste estudo foi avaliar o uso regular de serviços odontológicos entre adultos, identificando grupos nos quais esse comportamento é mais freqüente. O estudo foi realizado em Pelotas, Rio Grande do Sul, Brasil, com desenho transversal de base populacional, envolvendo 2.961 indivíduos, que responderam um questionário estruturado. A prevalência de uso regular encontrada foi de 32,8%. Estiveram positivamente associadas ao uso de forma regular as seguintes características: ser do sexo feminino, ter idade The aim of this study was to estimate the prevalence of regular use of dental services by adults and identify groups where this behavior is more frequent. A cross-sectional population-based study was carried out in Pelotas, southern Brazil, including 2,961 individuals who answered a standardized questionnaire. Overall prevalence of regular use of dental services was 32.8%. The following variables were positively associated with regular use: female gender, age > 60 years, no partner, high educational level, high economic status, private service user, good/excellent self-rated oral health, and no perceived need for dental treatment. Those who had received orientation on prevention and expressed a favorable view towards the dentist had higher odds of being regular users. Especially among lower-income individuals, regular use was infrequent (15%. When restricting the analysis to users of public dental services, schooling was still positively associated with the outcome. Dental services, especially in the public sector, should develop strategies to increase regular and preventive use.
Carberry, Hugh; And Others
1981-01-01
Major objectives of the teacher workshop are to increase the empathy and knowledge of the regular teacher concerning the characteristics and problems of the LD student, and to work out communication problems and increase the dialogue between the resource learning center teachers and the regular classroom teachers. (SBH)
History of Space Shuttle Rendezvous
Goodman, John L.
2011-01-01
This technical history is intended to provide a technical audience with an introduction to the rendezvous and proximity operations history of the Space Shuttle Program. It details the programmatic constraints and technical challenges encountered during shuttle development in the 1970s and over thirty years of shuttle missions. An overview of rendezvous and proximity operations on many shuttle missions is provided, as well as how some shuttle rendezvous and proximity operations systems and flight techniques evolved to meet new programmatic objectives. This revised edition provides additional information on Mercury, Gemini, Apollo, Skylab, and Apollo/Soyuz. Some chapters on the Space Shuttle have been updated and expanded. Four special focus chapters have been added to provide more detailed information on shuttle rendezvous. A chapter on the STS-39 mission of April/May 1991 describes the most complex deploy/retrieve mission flown by the shuttle. Another chapter focuses on the Hubble Space Telescope servicing missions. A third chapter gives the reader a detailed look at the February 2010 STS-130 mission to the International Space Station. The fourth chapter answers the question why rendezvous was not completely automated on the Gemini, Apollo, and Space Shuttle vehicles.
Matos, D L; Lima-Costa, M F; Guerra, H L; Marcenes, W
2001-01-01
A cross-sectional study was conducted in Bambuí, Minas Gerais, to identify factors associated with regular use of dental services. Participants were interviewed with a structured questionnaire and previously validated questions. 999/1,221 (81.8%) randomly selected individuals aged > 18 years participated in the Bambuí dental survey. Of these, 654 out of 656 individuals who had at least one natural tooth and had visited a dentist during their lifetime participated in the study. Results adjusted by multiple logistic regression showed that regular use of dental services was significantly related to having > 8 and 4-7 years of schooling (OR = 9.90; 95% CI = 2.90-33.77 and OR = 3.87; 95% CI = 1.11-13.51, respectively), having a preference for restorative treatment rather than extraction (OR = 4.91; 95% CI = 2.23-10.79), having no present need of dental treatment (OR = 4.87; 95% CI = 3.17-7.49), and belief that visiting the dentist prevents tooth decay and gum disease (OR = 1.73; 95% CI = 1.13-2.65). The results show that regular use of dental services was related to factors distributed in the Andersen and Newman model (1973) explaining use of dentistry services.
Tóth, L Fejes; Ulam, S; Stark, M
1964-01-01
Regular Figures concerns the systematology and genetics of regular figures. The first part of the book deals with the classical theory of the regular figures. This topic includes description of plane ornaments, spherical arrangements, hyperbolic tessellations, polyhedral, and regular polytopes. The problem of geometry of the sphere and the two-dimensional hyperbolic space are considered. Classical theory is explained as describing all possible symmetrical groupings in different spaces of constant curvature. The second part deals with the genetics of the regular figures and the inequalities fo
2007-01-01
Please note that starting from 1 March 2007, the shuttle requests: for official visits or bidders' conferences on the CERN site; towards/from the airport or central Geneva; for long distances, shall be made via Fm.Support@cern.ch or by calling 77777. The radio taxi will still be reachable at 76969. TS/FM Group
General Infrastructure Services Department
2011-01-01
As of Monday 21 February, a new schedule will come into effect for the Airport Shuttle (circuit No. 4) at the end of the afternoon: Last departure at 7:00 pm from Main Buildig, (Bldg. 500) to Airport (instead of 5:10 p.m.); Last departure from Airport to CERN, Main Buildig, (Bldg. 500), at 7:30 p.m. (instead of 5:40 p.m.). Group GS-IS
Sharma, Umesh; Moore, Dennis; Sonawane, Sanjeev
2009-01-01
Attitudes and concerns of pre-service teachers regarding implementation of inclusive education were examined. The participants consisted of 480 pre-service teachers enrolled in a one year Bachelor of Education (B.Ed) program at Pune University, in the state of Maharashtra. The results of the study showed that participants had somewhat negative…
Da Feng
2016-12-01
Full Text Available Regular maintenance of non-communicable chronic diseases can constrain disease progression in diabetic and hypertensive patients. To identify the individual and social factors that are associated with positive health-seeking behaviors and regular maintenance of chronic diseases, we have conducted a follow up study in 2015 on diabetic and hypertensive patients in Hubei Province. We used binary logistic regression models to determine specific factors associated with diabetic and hypertensive patients that sought healthcare services for their conditions in accordance with current Chinese Centers for Disease Prevention and Control (CDC guidelines. Our findings show that 42.16% of 510 people living with chronic conditions (PLCDs sought health services in line with existing guidelines. Findings also show a higher probability (8.418 times for PLCDs seeking healthcare services at higher-tiered hospitals (secondary and tertiary hospitals than for PLCDs seeking care at primary hospitals (odds ratio (OR = 8.418, 95% confidence interval (CI = 4.82, 14.27, p < 0.001. These analyses underscore the importance of having patient advocates who can provide support, where necessary, and encourage positive health-seeking behavior. The study also shows a negative impact on regular maintenance for PLCDs in households with high financial constraints. In contrast, the study shows positive impacts for increased household income, age, and residency in rural locations. In sum, this study underscores the importance of primary hospitals as key points of care and critical players in care coordination for PLCDs. The study provides more evidence for Chinese policymakers seeking to contain costs and improve population health. The findings also underscore the need for community-based interventions, specifically interventions that link local primary hospitals, friends/family members, and PLCDs.
Space Shuttle Strategic Planning Status
Norbraten, Gordon L.; Henderson, Edward M.
2007-01-01
The Space Shuttle Program is aggressively flying the Space Shuttle manifest for assembling the International Space Station and servicing the Hubble Space Telescope. Completing this flight manifest while concurrently transitioning to the Exploration architecture creates formidable challenges; the most notable of which is retaining critical skills within the Shuttle Program workforce. The Program must define a strategy that will allow safe and efficient fly-out of the Shuttle, while smoothly transitioning Shuttle assets (both human and facility) to support early flight demonstrations required in the development of NASA's Crew Exploration Vehicle (Orion) and Crew and Cargo Launch Vehicles (Ares I). The Program must accomplish all of this while maintaining the current level of resources. Therefore, it will be necessary to initiate major changes in operations and contracting. Overcoming these challenges will be essential for NASA to fly the Shuttle safely, accomplish the Vision for Space Exploration, and ultimately meet the national goal of maintaining a robust space program. This paper will address the Space Shuttle Program s strategy and its current status in meeting these challenges.
Klerkx, L.W.A.; Jansen, J.
2010-01-01
Advisory service provisioning on sustainability issues such as the environment and food safety is considered suboptimal in privatised pluralistic agricultural extension systems. Hence policy measures have been proposed to stimulate farmer demand for such sustainable farm management advice (pull
Changes to the shuttle circuits
GS Department
2011-01-01
To fit with passengers expectation, there will be some changes to the shuttle circuits as from Monday 10 October. See details on http://cern.ch/ShuttleService (on line on 7 October). Circuit No. 5 is cancelled as circuit No. 1 also stops at Bldg. 33. In order to guarantee shorter travel times, circuit No. 1 will circulate on Meyrin site only and circuit No. 2, with departures from Bldg. 33 and 500, on Prévessin site only. Site Services Section
Klerkx, L.W.A.; Jansen, J.
2010-01-01
Advisory service provisioning on sustainability issues such as environmental care and food safety is considered suboptimal in privatized extension systems, which comprise a diverse set of private advisors. Apart from funding dedicated ‘public good’ projects, government also relies on these advisors
Hansen, Lars Kai; Rasmussen, Carl Edward; Svarer, C.
1994-01-01
Regularization, e.g., in the form of weight decay, is important for training and optimization of neural network architectures. In this work the authors provide a tool based on asymptotic sampling theory, for iterative estimation of weight decay parameters. The basic idea is to do a gradient descent...... in the estimated generalization error with respect to the regularization parameters. The scheme is implemented in the authors' Designer Net framework for network training and pruning, i.e., is based on the diagonal Hessian approximation. The scheme does not require essential computational overhead in addition...... to what is needed for training and pruning. The viability of the approach is demonstrated in an experiment concerning prediction of the chaotic Mackey-Glass series. The authors find that the optimized weight decays are relatively large for densely connected networks in the initial pruning phase, while...
N.J.A. van Exel (Job); M.A. Koopmanschap (Marc); J.D.H. van Wijngaarden (Jeroen); W.J.M. Scholte op Reimer (Wilma)
2003-01-01
textabstractBackground. Stroke is a major cause of death and long-term disability in Western societies and constitutes a major claim on health care budgets. Organising stroke care in a stroke service has recently been demonstrated to result in better health effects for patients. This paper discusses
M.A. Koopmanschap (Marc); W.J.M. Scholte op Reimer (Wilma); J.D.H. van Wijngaarden (Jeroen); N.J.A. van Exel (Job)
2003-01-01
textabstractBACKGROUND: Stroke is a major cause of death and long-term disability in Western societies and constitutes a major claim on health care budgets. Organising stroke care in a stroke service has recently been demonstrated to result in better health effects for patients. Th
Coxeter, H S M
1973-01-01
Polytopes are geometrical figures bounded by portions of lines, planes, or hyperplanes. In plane (two dimensional) geometry, they are known as polygons and comprise such figures as triangles, squares, pentagons, etc. In solid (three dimensional) geometry they are known as polyhedra and include such figures as tetrahedra (a type of pyramid), cubes, icosahedra, and many more; the possibilities, in fact, are infinite! H. S. M. Coxeter's book is the foremost book available on regular polyhedra, incorporating not only the ancient Greek work on the subject, but also the vast amount of information
Manas Mukul; Vinee Srivastava; Malay Mukul
2015-08-01
The Shuttle Radar Topography Mission (SRTM) carried out in February 2000 has provided near global topographic data that has been widely used in many fields of earth sciences. The mission goal of an absolute vertical accuracy within 16 m (with 90% confidence)/RMSE ∼10 m was achieved based on ground validation of SRTM data through various studies using global positioning system (GPS). We present a new and independent assessment of the vertical accuracy of both the X- and C-band SRTM datasets using data from the International GNSS Service (IGS) network of high-precision static GPS stations. These stations exist worldwide, have better spatial distribution than previous studies, have a vertical accuracy of 6 mm and constitute the most accurate ground control points (GCPs) possible on earth; these stations are used as fiducial stations to define the International Terrestrial Reference Frame (ITRF). Globally, for outlier-filtered data (135 X-band stations and 290 C-band stations), the error or difference between IGS and SRTM heights exhibits a non-normal distribution with a mean and standard error of 8.2 ± 0.7 and 6.9 ± 0.5 m for X- and C-band data, respectively. Continent-wise, Africa, Australia and North America comply with the SRTM mission absolute vertical accuracy of 16 m (with 90% confidence)/RMSE ∼10 m. However, Asia, Europe and South America have vertical errors higher than the SRTM mission goal. At stations where both the X- and C-band SRTM data were present, the root mean square error (RMSE) of both the X- and C-bands was identical at 11.5 m, indicating similar quality of both the X- and C-band SRTM data.
Shuttle Wastewater Solution Characterization
Adam, Niklas; Pham, Chau
2011-01-01
During the 31st shuttle mission to the International Space Station, STS-129, there was a clogging event in the shuttle wastewater tank. A routine wastewater dump was performed during the mission and before the dump was completed, degraded flow was observed. In order to complete the wastewater dump, flow had to be rerouted around the dump filter. As a result, a basic chemical and microbial investigation was performed to understand the shuttle wastewater system and perform mitigation tasks to prevent another blockage. Testing continued on the remaining shuttle flights wastewater and wastewater tank cleaning solutions. The results of the analyses and the effect of the mitigation steps are detailed in this paper.
Prochaska, Jürgen H; Göbel, Sebastian; Keller, Karsten; Coldewey, Meike; Ullmann, Alexander; Lamparter, Heidrun; Jünger, Claus; Al-Bayati, Zaid; Baer, Christina; Walter, Ulrich; Bickel, Christoph; ten Cate, Hugo; Münzel, Thomas; Wild, Philipp S
2015-01-23
The majority of studies on quality of oral anticoagulation (OAC) therapy with vitamin K-antagonists are performed with short-acting warfarin. Data on long-acting phenprocoumon, which is frequently used in Europe for OAC therapy and is considered to enable more stable therapy adjustment, are scarce. In this study, we aimed to assess quality of OAC therapy with phenprocoumon in regular medical care and to evaluate its potential for optimization in a telemedicine-based coagulation service. In the prospective observational cohort study program thrombEVAL we investigated 2,011 patients from regular medical care in a multi-center cohort study and 760 patients from a telemedicine-based coagulation service in a single-center cohort study. Data were obtained from self-reported data, computer-assisted personal interviews, and laboratory measurements according to standard operating procedures with detailed quality control. Time in therapeutic range (TTR) was calculated by linear interpolation method to assess quality of OAC therapy. Study monitoring was carried out by an independent institution. Overall, 15,377 treatment years and 48,955 international normalized ratio (INR) measurements were analyzed. Quality of anticoagulation, as measured by median TTR, was 66.3% (interquartile range (IQR) 47.8/81.9) in regular medical care and 75.5% (IQR 64.2/84.4) in the coagulation service (P service with TTR at 76.2% [(IQR 65.6/84.7); P = 0.001)]. Prospective follow-up of coagulation service patients with pretreatment in regular medical care showed an improvement of the TTR from 66.2% (IQR 49.0/83.6) to 74.5% (IQR 62.9/84.2; P service. Treatment in the coagulation service contributed to an optimization of the profile of time outside therapeutic range, a 2.2-fold increase of stabile INR adjustment and a significant decrease in TTR variability by 36% (P Quality of anticoagulation with phenprocoumon was comparably high in this real-world sample of regular medical care. Treatment in a
2001-01-01
The Space Shuttle represented an entirely new generation of space vehicles, the world's first reusable spacecraft. Unlike earlier expendable rockets, the Shuttle was designed to be launched over and over again and would serve as a system for ferrying payloads and persornel to and from Earth orbit. The Shuttle's major components are the orbiter spacecraft; the three main engines, with a combined thrust of more than 1.2 million pounds; the huge external tank (ET) that feeds the liquid hydrogen fuel and liquid oxygen oxidizer to the three main engines; and the two solid rocket boosters (SRB's), with their combined thrust of some 5.8 million pounds, that provide most of the power for the first two minutes of flight. Crucially involved with the Space Shuttle program virtually from its inception, the Marshall Space Flight Center (MSFC) played a leading role in the design, development, testing, and fabrication of many major Shuttle propulsion components. The MSFC was assigned responsibility for developing the Shuttle orbiter's high-performance main engines, the most complex rocket engines ever built. The MSFC was also responsible for developing the Shuttle's massive ET and the solid rocket motors and boosters.
Space Shuttle Vehicle Illustration
1975-01-01
The Space Shuttle represented an entirely new generation of space vehicle, the world's first reusable spacecraft. Unlike earlier expendable rockets, the Shuttle was designed to be launched over and over again and would serve as a system for ferrying payloads and persornel to and from Earth orbit. The Shuttle's major components are the orbiter spacecraft; the three main engines, with a combined thrust of more than 1.2 million pounds; the huge external tank (ET) that feeds the liquid hydrogen fuel and liquid oxygen oxidizer to the three main engines; and the two solid rocket boosters (SRB's), with their combined thrust of some 5.8 million pounds. The SRB's provide most of the power for the first two minutes of flight. Crucially involved with the Space Shuttle program virtually from its inception, the Marshall Space Flight Center (MSFC) played a leading role in the design, development, testing, and fabrication of many major Shuttle propulsion components. The MSFC was assigned responsibility for developing the Shuttle orbiter's high-performance main engines, the most complex rocket engines ever built. The MSFC was also responsible for developing the Shuttle's massive ET and the solid rocket motors and boosters.
MSFC shuttle lightning research
Vaughan, Otha H., Jr.
1993-01-01
The shuttle mesoscale lightning experiment (MLE), flown on earlier shuttle flights, and most recently flown on the following space transportation systems (STS's), STS-31, -32, -35, -37, -38, -40, -41, and -48, has continued to focus on obtaining additional quantitative measurements of lightning characteristics and to create a data base for use in demonstrating observation simulations for future spaceborne lightning mapping systems. These flights are also providing design criteria data for the design of a proposed shuttle MLE-type lightning research instrument called mesoscale lightning observational sensors (MELOS), which are currently under development here at MSFC.
Henderson, Edward M.; Nguyen, Tri X.
2011-01-01
This paper documents some of the evolutionary steps in developing a rigorous Space Shuttle launch abort capability. The paper addresses the abort strategy during the design and development and how it evolved during Shuttle flight operations. The Space Shuttle Program made numerous adjustments in both the flight hardware and software as the knowledge of the actual flight environment grew. When failures occurred, corrections and improvements were made to avoid a reoccurrence and to provide added capability for crew survival. Finally some lessons learned are summarized for future human launch vehicle designers to consider.
1983-01-01
Inventory Management System (SIMS) consists of series of integrated support programs providing supply support for both Shuttle program and Kennedy Space Center base opeations SIMS controls all supply activities and requirements from single point. Programs written in COBOL.
Yong Hua LI; Hai Bin KAN; Bing Jun YU
2004-01-01
In this paper, a special kind of partial algebras called projective partial groupoids is defined.It is proved that the inverse image of all projections of a fundamental weak regular *-semigroup under the homomorphism induced by the maximum idempotent-separating congruence of a weak regular *-semigroup has a projective partial groupoid structure. Moreover, a weak regular *-product which connects a fundamental weak regular *-semigroup with corresponding projective partial groupoid is defined and characterized. It is finally proved that every weak regular *-product is in fact a weak regular *-semigroup and any weak regular *-semigroup is constructed in this way.
NOETHERIAN GR-REGULAR RINGS ARE REGULAR
LIHUISHI
1994-01-01
It is proved that for a left Noetherian z-graded ring A,if every finitely generated graded A-module has finite projective dimension(i.e-,A is gr-regular)then every finitely generated A-module has finite projective dimension(i.e.,A is regular).Some applications of this result to filtered rings and some classical cases are also given.
Shuttle Planning for Link Closures in Urban Public Transport Networks
van der Hurk, Evelien; Koutsopoulos, Haris N.; Wilson, Nigel
2016-01-01
Urban public transport systems must periodically close certain links for maintenance, which can have significant effects on the service provided to passengers. In practice, the effects of closures are mitigated by replacing the closed links with a simple shuttle service. However, alternative...... cost, which includes transfers and frequency-dependent waiting time costs. This model is applied to a shuttle design problem based on a real-world case study of the Massachusetts Bay Transportation Authority network of Boston, Massachusetts. The results show that additional shuttle routes can reduce...
Shuttle Planning for Link Closures in Urban Public Transport Networks
van der Hurk, Evelien; Koutsopoulos, Haris N.; Wilson, Nigel
2016-01-01
Urban public transport systems must periodically close certain links for maintenance, which can have significant effects on the service provided to passengers. In practice, the effects of closures are mitigated by replacing the closed links with a simple shuttle service. However, alternative...... cost, which includes transfers and frequency-dependent waiting time costs. This model is applied to a shuttle design problem based on a real-world case study of the Massachusetts Bay Transportation Authority network of Boston, Massachusetts. The results show that additional shuttle routes can reduce...
Zettl, Alex Karlwalter [Kensington, CA
2012-03-06
A device for storing data using nanoparticle shuttle memory having a nanotube. The nanotube has a first end and a second end. A first electrode is electrically connected to the first end of the nanotube. A second electrode is electrically connected to the second end of the nanotube. The nanotube has an enclosed nanoparticle shuttle. A switched voltage source is electrically connected to the first electrode and the second electrode, whereby a voltage may be controllably applied across the nanotube. A resistance meter is also connected to the first electrode and the second electrode, whereby the electrical resistance across the nanotube can be determined.
Regular Expression Pocket Reference
Stubblebine, Tony
2007-01-01
This handy little book offers programmers a complete overview of the syntax and semantics of regular expressions that are at the heart of every text-processing application. Ideal as a quick reference, Regular Expression Pocket Reference covers the regular expression APIs for Perl 5.8, Ruby (including some upcoming 1.9 features), Java, PHP, .NET and C#, Python, vi, JavaScript, and the PCRE regular expression libraries. This concise and easy-to-use reference puts a very powerful tool for manipulating text and data right at your fingertips. Composed of a mixture of symbols and text, regular exp
Dimensional regularization is generic
Fujikawa, Kazuo
2016-01-01
The absence of the quadratic divergence in the Higgs sector of the Standard Model in the dimensional regularization is usually regarded to be an exceptional property of a specific regularization. To understand what is going on in the dimensional regularization, we illustrate how to reproduce the results of the dimensional regularization for the $\\lambda\\phi^{4}$ theory in the more conventional regularization such as the higher derivative regularization; the basic postulate involved is that the quadratically divergent induced mass, which is independent of the scale change of the physical mass, is kinematical and unphysical. This is consistent with the derivation of the Callan-Symanzik equation, which is a comparison of two theories with slightly different masses, for the $\\lambda\\phi^{4}$ theory without encountering the quadratic divergence. We thus suggest that the dimensional regularization is generic in a bottom-up approach starting with a successful low-energy theory. We also define a modified version of t...
STS-61 Space Shuttle mission report
Fricke, Robert W., Jr.
1994-02-01
The STS-61 Space Shuttle Program Mission Report summarizes the Hubble Space Telescope (HST) servicing mission as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the fifty-ninth flight of the Space Shuttle Program and fifth flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-60; three SSME's which were designated as serial numbers 2019, 2033, and 2017 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-063. The RSRM's that were installed in each SRB were designated as 360L023A (lightweight) for the left SRB, and 360L023B (lightweight) for the right SRB. This STS-61 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objective of the STS-61 mission was to perform the first on-orbit servicing of the Hubble Space Telescope. The servicing tasks included the installation of new solar arrays, replacement of the Wide Field/Planetary Camera I (WF/PC I) with WF/PC II, replacement of the High Speed Photometer (HSP) with the Corrective Optics Space Telescope Axial Replacement (COSTAR), replacement of rate sensing units (RSU's) and electronic control units (ECU's), installation of new magnetic sensing systems and fuse plugs, and the repair of the Goddard High Resolution Spectrometer (GHRS). Secondary objectives were to perform the requirements of the IMAX Cargo Bay Camera (ICBC), the IMAX Camera, and the Air Force Maui Optical Site (AMOS) Calibration Test.
Fundamental plant biology enabled by the space shuttle.
Paul, Anna-Lisa; Wheeler, Ray M; Levine, Howard G; Ferl, Robert J
2013-01-01
The relationship between fundamental plant biology and space biology was especially synergistic in the era of the Space Shuttle. While all terrestrial organisms are influenced by gravity, the impact of gravity as a tropic stimulus in plants has been a topic of formal study for more than a century. And while plants were parts of early space biology payloads, it was not until the advent of the Space Shuttle that the science of plant space biology enjoyed expansion that truly enabled controlled, fundamental experiments that removed gravity from the equation. The Space Shuttle presented a science platform that provided regular science flights with dedicated plant growth hardware and crew trained in inflight plant manipulations. Part of the impetus for plant biology experiments in space was the realization that plants could be important parts of bioregenerative life support on long missions, recycling water, air, and nutrients for the human crew. However, a large part of the impetus was that the Space Shuttle enabled fundamental plant science essentially in a microgravity environment. Experiments during the Space Shuttle era produced key science insights on biological adaptation to spaceflight and especially plant growth and tropisms. In this review, we present an overview of plant science in the Space Shuttle era with an emphasis on experiments dealing with fundamental plant growth in microgravity. This review discusses general conclusions from the study of plant spaceflight biology enabled by the Space Shuttle by providing historical context and reviews of select experiments that exemplify plant space biology science.
Robust Sparse Analysis Regularization
Vaiter, Samuel; Dossal, Charles; Fadili, Jalal
2011-01-01
This paper studies the properties of L1-analysis regularization for the resolution of linear inverse problems. Most previous works consider sparse synthesis priors where the sparsity is measured as the L1 norm of the coefficients that synthesize the signal in a given dictionary. In contrast, the more general analysis regularization minimizes the L1 norm of the correlations between the signal and the atoms in the dictionary. The corresponding variational problem includes several well-known regularizations such as the discrete total variation and the fused lasso. We first prove that a solution of analysis regularization is a piecewise affine function of the observations. Similarly, it is a piecewise affine function of the regularization parameter. This allows us to compute the degrees of freedom associated to sparse analysis estimators. Another contribution gives a sufficient condition to ensure that a signal is the unique solution of the analysis regularization when there is no noise in the observations. The s...
Goyvaerts, Jan
2009-01-01
This cookbook provides more than 100 recipes to help you crunch data and manipulate text with regular expressions. Every programmer can find uses for regular expressions, but their power doesn't come worry-free. Even seasoned users often suffer from poor performance, false positives, false negatives, or perplexing bugs. Regular Expressions Cookbook offers step-by-step instructions for some of the most common tasks involving this tool, with recipes for C#, Java, JavaScript, Perl, PHP, Python, Ruby, and VB.NET. With this book, you will: Understand the basics of regular expressions through a
Space Shuttle navigation validation
Ragsdale, A.
The validation of the guidance, navigation, and control system of the Space Shuttle is explained. The functions of the ascent, on-board, and entry mission phases software of the navigation system are described. The common facility testing, which evaluates the simulations to be used in the navigation validation, is examined. The standard preflight analysis of the operational modes of the navigation software and the post-flight navigation analysis are explained. The conversion of the data into a useful reference frame and the use of orbit parameters in the analysis of the data are discussed. Upon entry the data received are converted to flags, ratios, and residuals in order to evaluate performance and detect errors. Various programs developed to support navigation validation are explained. A number of events that occurred with the Space Shuttle's navigation system are described.
Shuttle entry guidance revisited
Mease, Kenneth D.; Kremer, Jean-Paul
1992-08-01
The Shuttle entry guidance concept is reviewed which is aimed at tracking a reference drag trajectory that leads to the specified range and velocity for the initiation of the terminal energy management phase. An approximate method of constructing the domain of attraction is proposed, and its validity is ascertained by simulation. An alternative guidance law yielding global exponential tracking in the absence of control saturation is derived using a feedback linearization method. It is noted that the alternative guidance law does not improve on the stability and performance of the current guidance law, for the operating domain and control capability of the Shuttle. It is suggested that the new guidance law with a larger operating domain and increased lift-to-drag capability would be superior.
Shuttle entry guidance revisited
Mease, Kenneth D.; Kremer, Jean-Paul
1992-01-01
The Shuttle entry guidance concept is reviewed which is aimed at tracking a reference drag trajectory that leads to the specified range and velocity for the initiation of the terminal energy management phase. An approximate method of constructing the domain of attraction is proposed, and its validity is ascertained by simulation. An alternative guidance law yielding global exponential tracking in the absence of control saturation is derived using a feedback linearization method. It is noted that the alternative guidance law does not improve on the stability and performance of the current guidance law, for the operating domain and control capability of the Shuttle. It is suggested that the new guidance law with a larger operating domain and increased lift-to-drag capability would be superior.
Electron shuttles in biotechnology.
Watanabe, Kazuya; Manefield, Mike; Lee, Matthew; Kouzuma, Atsushi
2009-12-01
Electron-shuttling compounds (electron shuttles [ESs], or redox mediators) are essential components in intracellular electron transfer, while microbes also utilize self-produced and naturally present ESs for extracellular electron transfer. These compounds assist in microbial energy metabolism by facilitating electron transfer between microbes, from electron-donating substances to microbes, and/or from microbes to electron-accepting substances. Artificially supplemented ESs can create new routes of electron flow in the microbial energy metabolism, thereby opening up new possibilities for the application of microbes to biotechnology processes. Typical examples of such processes include halogenated-organics bioremediation, azo-dye decolorization, and microbial fuel cells. Herein we suggest that ESs can be applied widely to create new microbial biotechnology processes.
Regularization in kernel learning
Mendelson, Shahar; 10.1214/09-AOS728
2010-01-01
Under mild assumptions on the kernel, we obtain the best known error rates in a regularized learning scenario taking place in the corresponding reproducing kernel Hilbert space (RKHS). The main novelty in the analysis is a proof that one can use a regularization term that grows significantly slower than the standard quadratic growth in the RKHS norm.
Regular database update logics
Spruit, Paul; Wieringa, Roel; Meyer, John-Jules
2001-01-01
We study regular first-order update logic (FUL), which is a variant of regular dynamic logic in which updates to function symbols as well as to predicate symbols are possible. We fi1rst study FUL without making assumptions about atomic updates. Second, we look at relational algebra update logic (RAU
Space Shuttle RTOS Bayesian Network
Morris, A. Terry; Beling, Peter A.
2001-01-01
With shrinking budgets and the requirements to increase reliability and operational life of the existing orbiter fleet, NASA has proposed various upgrades for the Space Shuttle that are consistent with national space policy. The cockpit avionics upgrade (CAU), a high priority item, has been selected as the next major upgrade. The primary functions of cockpit avionics include flight control, guidance and navigation, communication, and orbiter landing support. Secondary functions include the provision of operational services for non-avionics systems such as data handling for the payloads and caution and warning alerts to the crew. Recently, a process to selection the optimal commercial-off-the-shelf (COTS) real-time operating system (RTOS) for the CAU was conducted by United Space Alliance (USA) Corporation, which is a joint venture between Boeing and Lockheed Martin, the prime contractor for space shuttle operations. In order to independently assess the RTOS selection, NASA has used the Bayesian network-based scoring methodology described in this paper. Our two-stage methodology addresses the issue of RTOS acceptability by incorporating functional, performance and non-functional software measures related to reliability, interoperability, certifiability, efficiency, correctness, business, legal, product history, cost and life cycle. The first stage of the methodology involves obtaining scores for the various measures using a Bayesian network. The Bayesian network incorporates the causal relationships between the various and often competing measures of interest while also assisting the inherently complex decision analysis process with its ability to reason under uncertainty. The structure and selection of prior probabilities for the network is extracted from experts in the field of real-time operating systems. Scores for the various measures are computed using Bayesian probability. In the second stage, multi-criteria trade-off analyses are performed between the scores
Regularization by External Variables
Bossolini, Elena; Edwards, R.; Glendinning, P. A.
2016-01-01
Regularization was a big topic at the 2016 CRM Intensive Research Program on Advances in Nonsmooth Dynamics. There are many open questions concerning well known kinds of regularization (e.g., by smoothing or hysteresis). Here, we propose a framework for an alternative and important kind of regula...... of regularization, by external variables that shadow either the state or the switch of the original system. The shadow systems are derived from and inspired by various applications in electronic control, predator-prey preference, time delay, and genetic regulation....
Mukul, Manas; Srivastava, Vinee; Mukul, Malay
2016-07-01
Global Shuttle Radar Topography Mission (SRTM) data products have been widely used in Earth Sciences without an estimation of their accuracy and reliability even though large outliers exist in them. The global 1 arc-sec, 30 m resolution, SRTM C-Band (C-30) data collected in February 2000 has been recently released (2014-2015) outside North America. We present the first global assessment of the vertical accuracy of C-30 data using Ground Control Points (GCPs) from the International GNSS Service (IGS) Network of high-precision static fiducial stations that define the International Terrestrial Reference Frame (ITRF). Large outliers (height error ranging from -1285 to 2306 m) were present in the C-30 dataset and 14% of the data were removed to reduce the root mean square error (RMSE) of the dataset from ˜187 to 10.3 m which is close to the SRTM goal of an absolute vertical accuracy of RMSE ˜10 m. Globally, for outlier-filtered data from 287 GCPs, the error or difference between IGS and SRTM heights exhibited a non-normal distribution with a mean and standard error of 6.5 ± 0.5 m. Continent-wise, only Australia, North and South America complied with the SRTM goal. At stations where all the X- and C-Band SRTM data were present, the RMSE of the outlier-filtered C-30 data was 11.7 m. However, the RMSE of outlier-included dataset where C- and X-Band data were present was ˜233 m. The results suggest that the SRTM data must only be used after regional accuracy analysis and removal of outliers. If used raw, they may produce results that are statistically insignificant with RMSE in 100s of meters.
葛姗姗; 曲晶
2011-01-01
To address the International Space Station(ISS) resupply probem caused by space shuttle's retirement, NASA put forward the Commercial Crew and Cargo Program (C3P) in 2005, and broke it down into two programs: the Comercial Orbital Transportation Services (COTS) program and the Commercial Crew Development (CCDev) program, which rely on U.S. Private sectors to develop reliable and cost-effective commercial orbital transportation systems for ISS resupply. This paper introduces the background of the above programs, especially the development of two kinds of commercial orbital transportation systems developped under the COTS effort: Falcon 9/Dragon and Taurus 2/Cygnus. Finally, the possible development prospects of U.S. Commercial orbital transportation are predicted.%为解决航天飞机退役后国际空间站运输的问题,NASA于2005年制定了商业乘员与货物运输计划(C3P),并在此计划下先后制定并实施了商业轨道运榆服务(COTS)计划和商业载人航天发展(CCDev)计划,以鼓励私营公司研发可靠、高性价比的商业航天运输系统,接替航天飞机执行国际空间站货物与人员运输任务.对上述计划进行介绍,重点介绍了COTS计划下研制的"法尔肯9+天龙座"和"金牛座2+天鹅座"两种商业轨道运输系统及其研制进展,最后对美国商业航天运输的发展前景进行了分析.
Manas Mukul; Vinee Srivastava; Malay Mukul
2016-07-01
Global Shuttle Radar Topography Mission (SRTM) data products have been widely used in EarthSciences without an estimation of their accuracy and reliability even though large outliers exist in them.The global 1 arc-sec, 30 m resolution, SRTM C-Band (C-30) data collected in February 2000 has beenrecently released (2014–2015) outside North America. We present the first global assessment of thevertical accuracy of C-30 data using Ground Control Points (GCPs) from the International GNSS Service(IGS) Network of high-precision static fiducial stations that define the International Terrestrial ReferenceFrame (ITRF). Large outliers (height error ranging from –1285 to 2306 m) were present in the C-30dataset and 14% of the data were removed to reduce the root mean square error (RMSE) of the datasetfrom ∼187 to 10.3 m which is close to the SRTM goal of an absolute vertical accuracy of RMSE ∼10 m.Globally, for outlier-filtered data from 287 GCPs, the error or difference between IGS and SRTM heightsexhibited a non-normal distribution with a mean and standard error of 6.5 ± 0.5 m. Continent-wise,only Australia, North and South America complied with the SRTM goal. At stations where all the XandC-Band SRTM data were present, the RMSE of the outlier-filtered C-30 data was 11.7 m. However,the RMSE of outlier-included dataset where C- and X-Band data were present was ∼233 m. The resultssuggest that the SRTM data must only be used after regional accuracy analysis and removal of outliers.If used raw, they may produce results that are statistically insignificant with RMSE in 100s of meters.
Shuttle Lesson Learned - Toxicology
James, John T.
2010-01-01
This is a script for a video about toxicology and the space shuttle. The first segment is deals with dust in the space vehicle. The next segment will be about archival samples. Then we'll look at real time on-board analyzers that give us a lot of capability in terms of monitoring for combustion products and the ability to monitor volatile organics on the station. Finally we will look at other issues that are about setting limits and dealing with ground based lessons that pertain to toxicology.
2000-01-01
Want to sit in the cockpit of the Space Shuttle and watch astronauts work in outer space? At StenniSphere, you can do that and much more. StenniSphere, the visitor center at John C. Stennis Space Center in Hancock County, Miss., presents 14,000-square-feet of interactive exhibits that depict America's race for space as well as a glimpse of the future. StenniSphere is open free of charge from 9 a.m. to 5 p.m. daily.
2000-01-01
Want to sit in the cockpit of the Space Shuttle and watch astronauts work in outer space? At StenniSphere, you can do that and much more. StenniSphere, the visitor center at John C. Stennis space Center in Hancock County, Miss., presents 14,000-square-feet of interactive exhibits that depict America's race for space as well as a glimpse of the future. Stennisphere is open free of charge from 9 a.m. to 5 p.m. daily.
Regularized maximum correntropy machine
Wang, Jim Jing-Yan
2015-02-12
In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.
Regular Expression Containment
Henglein, Fritz; Nielsen, Lasse
2011-01-01
We present a new sound and complete axiomatization of regular expression containment. It consists of the conventional axiomatiza- tion of concatenation, alternation, empty set and (the singleton set containing) the empty string as an idempotent semiring, the fixed- point rule E* = 1 + E × E......* for Kleene-star, and a general coin- duction rule as the only additional rule. Our axiomatization gives rise to a natural computational inter- pretation of regular expressions as simple types that represent parse trees, and of containment proofs as coercions. This gives the axiom- atization a Curry......-Howard-style constructive interpretation: Con- tainment proofs do not only certify a language-theoretic contain- ment, but, under our computational interpretation, constructively transform a membership proof of a string in one regular expres- sion into a membership proof of the same string in another regular expression. We...
Regularities of Multifractal Measures
Hun Ki Baek
2008-05-01
First, we prove the decomposition theorem for the regularities of multifractal Hausdorff measure and packing measure in $\\mathbb{R}^d$. This decomposition theorem enables us to split a set into regular and irregular parts, so that we can analyze each separately, and recombine them without affecting density properties. Next, we give some properties related to multifractal Hausdorff and packing densities. Finally, we extend the density theorem in [6] to any measurable set.
T. (A)LVAREZ
2012-01-01
For a closed linear relation in a Banach space the concept of regularity is introduced and studied.It is shown that many of the results of Mbekhta and other authors for operators remain valid in the context of multivalued linear operators.We also extend the punctured neighbourhood theorem for operators to linear relations and as an application we obtain a characterization of semiFredholm linear relations which are regular.
Quantum Shuttle in Phase Space
Novotny, Tomas; Donarini, Andrea; Jauho, Antti-Pekka
2003-01-01
Abstract: We present a quantum theory of the shuttle instability in electronic transport through a nanostructure with a mechanical degree of freedom. A phase space formulation in terms of the Wigner function allows us to identify a crossover from the tunneling to the shuttling regime, thus...... extending the previously found classical results to the quantum domain. Further, a new dynamical regime is discovered, where the shuttling is driven exclusively by the quantum noise....
47 CFR 76.614 - Cable television system regular monitoring.
2010-10-01
... 47 Telecommunication 4 2010-10-01 2010-10-01 false Cable television system regular monitoring. 76.614 Section 76.614 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.614 Cable television system regular monitoring. Cable television...
Space Shuttle development update
Brand, V.
1984-01-01
The development efforts, since the STS-4 flight, in the Space Shuttle (SS) program are presented. The SS improvements introduced in the last two years include lower-weight loads, communication through the Tracking and Data Relay Satellite, expanded extravehicular activity capability, a maneuvering backpack and the manipulator foot restraint, the improvements in thermal projection system, the 'optional terminal area management targeting' guidance software, a rendezvous system with radar and star tracker sensors, and improved on-orbit living conditions. The flight demonstrations include advanced launch techniques (e.g., night launch and direct insertion to orbit); the on-orbit demonstrations; and added entry and launching capabilities. The entry aerodynamic analysis and entry flight control fine tuning are described. Reusability, improved ascent performance, intact abort and landing flexibility, rollout control, and 'smart speedbrakes' are among the many improvements planned for the future.
Harpold, J. C.; Graves, C. A., Jr.
1978-01-01
This paper describes the design of the entry guidance for the Space Shuttle Orbiter. This guidance provides the steering commands for trajectory control from initial penetration of the earth's atmosphere until the terminal area guidance is activated at an earth-relative speed of 2500 fps. At this point, the Orbiter is at a distance of about 50 nmi from the runway threshold, and at an altitude of about 80,000 ft. The entry guidance design is based on an analytic solution of the equations of motion defining the drag acceleration profile that meets the terminal criteria of the entry flight while maintaining the flight within systems and operational constraints. Guidance commands, which are based on a control law that ensures damping of oscillatory type trajectory motion, are computed to steer the Orbiter to this drag acceleration profile.
Regularized Structural Equation Modeling.
Jacobucci, Ross; Grimm, Kevin J; McArdle, John J
A new method is proposed that extends the use of regularization in both lasso and ridge regression to structural equation models. The method is termed regularized structural equation modeling (RegSEM). RegSEM penalizes specific parameters in structural equation models, with the goal of creating easier to understand and simpler models. Although regularization has gained wide adoption in regression, very little has transferred to models with latent variables. By adding penalties to specific parameters in a structural equation model, researchers have a high level of flexibility in reducing model complexity, overcoming poor fitting models, and the creation of models that are more likely to generalize to new samples. The proposed method was evaluated through a simulation study, two illustrative examples involving a measurement model, and one empirical example involving the structural part of the model to demonstrate RegSEM's utility.
Faupin, Jeremy; Møller, Jacob Schach; Skibsted, Erik
2011-01-01
We study regularity of bound states pertaining to embedded eigenvalues of a self-adjoint operator H, with respect to an auxiliary operator A that is conjugate to H in the sense of Mourre. We work within the framework of singular Mourre theory which enables us to deal with confined massless Pauli–......–Fierz models, our primary example, and many-body AC-Stark Hamiltonians. In the simpler context of regular Mourre theory, our results boil down to an improvement of results obtained recently in [8, 9]....
Manifold Regularized Reinforcement Learning.
Li, Hongliang; Liu, Derong; Wang, Ding
2017-01-27
This paper introduces a novel manifold regularized reinforcement learning scheme for continuous Markov decision processes. Smooth feature representations for value function approximation can be automatically learned using the unsupervised manifold regularization method. The learned features are data-driven, and can be adapted to the geometry of the state space. Furthermore, the scheme provides a direct basis representation extension for novel samples during policy learning and control. The performance of the proposed scheme is evaluated on two benchmark control tasks, i.e., the inverted pendulum and the energy storage problem. Simulation results illustrate the concepts of the proposed scheme and show that it can obtain excellent performance.
Annotation of Regular Polysemy
Martinez Alonso, Hector
Regular polysemy has received a lot of attention from the theory of lexical semantics and from computational linguistics. However, there is no consensus on how to represent the sense of underspecified examples at the token level, namely when annotating or disambiguating senses of metonymic words...
Sparse structure regularized ranking
Wang, Jim Jing-Yan
2014-04-17
Learning ranking scores is critical for the multimedia database retrieval problem. In this paper, we propose a novel ranking score learning algorithm by exploring the sparse structure and using it to regularize ranking scores. To explore the sparse structure, we assume that each multimedia object could be represented as a sparse linear combination of all other objects, and combination coefficients are regarded as a similarity measure between objects and used to regularize their ranking scores. Moreover, we propose to learn the sparse combination coefficients and the ranking scores simultaneously. A unified objective function is constructed with regard to both the combination coefficients and the ranking scores, and is optimized by an iterative algorithm. Experiments on two multimedia database retrieval data sets demonstrate the significant improvements of the propose algorithm over state-of-the-art ranking score learning algorithms.
Regularized Reduced Order Models
Wells, David; Xie, Xuping; Iliescu, Traian
2015-01-01
This paper puts forth a regularization approach for the stabilization of proper orthogonal decomposition (POD) reduced order models (ROMs) for the numerical simulation of realistic flows. Two regularized ROMs (Reg-ROMs) are proposed: the Leray ROM (L-ROM) and the evolve-then-filter ROM (EF-ROM). These new Reg-ROMs use spatial filtering to smooth (regularize) various terms in the ROMs. Two spatial filters are used: a POD projection onto a POD subspace (Proj) and a new POD differential filter (DF). The four Reg-ROM/filter combinations are tested in the numerical simulation of the one-dimensional Burgers equation with a small diffusion coefficient and the three-dimensional flow past a circular cylinder at a low Reynolds number (Re = 100). Overall, the most accurate Reg-ROM/filter combination is EF-ROM-DF. Furthermore, the DF generally yields better results than Proj. Finally, the four Reg-ROM/filter combinations are computationally efficient and generally more accurate than the standard Galerkin ROM.
Regularizing portfolio optimization
Still, Susanne; Kondor, Imre
2010-07-01
The optimization of large portfolios displays an inherent instability due to estimation error. This poses a fundamental problem, because solutions that are not stable under sample fluctuations may look optimal for a given sample, but are, in effect, very far from optimal with respect to the average risk. In this paper, we approach the problem from the point of view of statistical learning theory. The occurrence of the instability is intimately related to over-fitting, which can be avoided using known regularization methods. We show how regularized portfolio optimization with the expected shortfall as a risk measure is related to support vector regression. The budget constraint dictates a modification. We present the resulting optimization problem and discuss the solution. The L2 norm of the weight vector is used as a regularizer, which corresponds to a diversification 'pressure'. This means that diversification, besides counteracting downward fluctuations in some assets by upward fluctuations in others, is also crucial because it improves the stability of the solution. The approach we provide here allows for the simultaneous treatment of optimization and diversification in one framework that enables the investor to trade off between the two, depending on the size of the available dataset.
A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California
2001-01-01
A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California, on May 1, 2001. NASA's Dryden Flight Research Center at Edwards would subsequently service the shuttle and mount it on a 747 for the ferry flight to the Kennedy Space Center in Florida.
Wen LIU; Jing LIN
2011-01-01
In this paper,we define a class of strongly connected digraph,called the k-walk-regular digraph,study some properties of it,provide its some algebraic characterization and point out that the O-walk-regular digraph is the same as the walk-regular digraph discussed BY Liu and Lin in 2010 and the D-walk-regular digraph is identical with the weakly distance-regular digraph defined by Comellas et al in 2004.
Space Shuttle Program Legacy Report
Johnson, Scott
2012-01-01
Share lessons learned on Space Shuttle Safety and Mission Assurance (S&MA) culture, processes, and products that can guide future enterprises to improve mission success and minimize the risk of catastrophic failures. Present the chronology of the Johnson Space Center (JSC) S&MA organization over the 40-year history of the Space Shuttle Program (SSP) and identify key factors and environments which contributed to positive and negative performance.
CERN Shuttles – TRAM arrival – Two additional shuttles as from 2 May 2011
General Infrastructure Services Department
2011-01-01
With the TRAM’s arrival at CERN and to facilitate mobility inside CERN, the GS Department is reinforcing CERN's shuttle services and will provide users with two additional shuttles from/to Building 33 (CERN Reception) as from Monday 2 May: Circuit No. 5: serving the Meyrin site (approx. every 15 minutes) •\tfrom 7·30 to 9·15 •\tfrom 11·30 to 13·28 (serving restaurants Nos.1 and 2) •\tfrom 16·30 to 18·35 Circuit No. 6: serving the Prevessin site (approx. every 20 minutes) •\tfrom 7·30 to 9·10 •\tfrom 11·30 to 13·28 (serving restaurants Nos. 1, 2 and 3) •\tfrom 16·30 to 18·23 For further details, please consult the timetable for these circuits at the following url: http://gs-dep.web.cern.ch/gs-dep/groups/SEM/ls/ShuttleService/ Please do not hesitate to give us your feedback...
Behavioral Health and Performance Operations During the Space Shuttle Program
Beven, G.; Holland, A.; Moomaw, R.; Sipes, W.; Vander Ark, S.
2011-01-01
Prior to the Columbia STS 107 disaster in 2003, the Johnson Space Center s Behavioral Health and Performance Group (BHP) became involved in Space Shuttle Operations on an as needed basis, occasionally acting as a consultant and primarily addressing crew-crew personality conflicts. The BHP group also assisted with astronaut selection at every selection cycle beginning in 1991. Following STS 107, an event that spawned an increased need of behavioral health support to STS crew members and their dependents, BHP services to the Space Shuttle Program were enhanced beginning with the STS 114 Return to Flight mission in 2005. These services included the presence of BHP personnel at STS launches and landings for contingency support, a BHP briefing to the entire STS crew at L-11 months, a private preflight meeting with the STS Commander at L-9 months, and the presence of a BHP consultant at the L-1.5 month Family Support Office briefing to crew and family members. The later development of an annual behavioral health assessment of all active astronauts also augmented BHP s Space Shuttle Program specific services, allowing for private meetings with all STS crew members before and after each mission. The components of each facet of these BHP Space Shuttle Program support services will be presented, along with valuable lessons learned, and with recommendations for BHP involvement in future short duration space missions
Annotation of Regular Polysemy
Martinez Alonso, Hector
Regular polysemy has received a lot of attention from the theory of lexical semantics and from computational linguistics. However, there is no consensus on how to represent the sense of underspecified examples at the token level, namely when annotating or disambiguating senses of metonymic words...... like “London” (Location/Organization) or “cup” (Container/Content). The goal of this dissertation is to assess whether metonymic sense underspecification justifies incorporating a third sense into our sense inventories, thereby treating the underspecified sense as independent from the literal...
Shuttle Atlantis Landing at Edwards
1985-01-01
NASA's Space Shuttle Atlantis touched down on the lakebed runway at Edwards Air Force Base in California's Mojave Desert Tuesday, 3 December 1985 at 1:33:49 p.m. Pacific Standard Time, concluding the STS 61-B international mission. The eight-day mission successfully deployed three communications satellites including the Mexican Morelos B, the Australian Aussat 2 and an RCA Satcom K-2 satellite. In addition, two spacewalks were performed to experiment with construction of structures in space. Crew of the 61-B mission included Commander Brewster H. Shaw, Jr.; Pilot Bryan D. O'Connor; Mission Specialists Mary L. Cleave, Sherwood C. Spring and Jerry L. Ross; and Payload Specialists Rudolfo Neri Vela of Mexico and Charles Walker of McDonnell Douglas Astronautics Co. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be used once. Space Shuttles are designed to be continually reused. When Space Shuttles are used to transport complete scientific laboratories
Shuttle Discovery Landing at Edwards
1989-01-01
The STS-29 Space Shuttle Discovery mission lands at NASA's then Ames-Dryden Flight Research Facility, Edwards AFB, California, early Saturday morning, 18 March 1989. Touchdown was at 6:35:49 a.m. PST and wheel stop was at 6:36:40 a.m. on runway 22. Controllers chose the concrete runway for the landing in order to make tests of braking and nosewheel steering. The STS-29 mission was very successful, completing the launch of a Tracking and Data Relay communications satellite, as well as a range of scientific experiments. Discovery's five-man crew was led by Commander Michael L. Coats, and included pilot John E. Blaha and mission specialists James P. Bagian, Robert C. Springer, and James F. Buchli. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be used once. Space Shuttles are designed to be continually reused. When Space Shuttles are used to transport complete scientific laboratories into space, the laboratories remain inside the payload bay throughout
From regular modules to von Neumann regular rings via coordinatization
Leonard Daus
2014-07-01
Full Text Available In this paper we establish a very close link (in terms of von Neu- mann's coordinatization between regular modules introduced by Zel- manowitz, on one hand, and von Neumann regular rings, on the other hand: we prove that the lattice L^{fg}(M of all finitely generated submodules of a finitely generated regular module M, over an arbitrary ring, can be coordinatized as the lattice of all principal right ideals of some von Neumann regular ring S.
Modular Regularization Algorithms
Jacobsen, Michael
2004-01-01
The class of linear ill-posed problems is introduced along with a range of standard numerical tools and basic concepts from linear algebra, statistics and optimization. Known algorithms for solving linear inverse ill-posed problems are analyzed to determine how they can be decomposed into indepen......The class of linear ill-posed problems is introduced along with a range of standard numerical tools and basic concepts from linear algebra, statistics and optimization. Known algorithms for solving linear inverse ill-posed problems are analyzed to determine how they can be decomposed...... into independent modules. These modules are then combined to form new regularization algorithms with other properties than those we started out with. Several variations are tested using the Matlab toolbox MOORe Tools created in connection with this thesis. Object oriented programming techniques are explained...... and used to set up the illposed problems in the toolbox. Hereby, we are able to write regularization algorithms that automatically exploit structure in the ill-posed problem without being rewritten explicitly. We explain how to implement a stopping criteria for a parameter choice method based upon...
Structure for Regular Inclusions
Pitts, David R
2012-01-01
We study pairs (C,D) of unital C*-algebras where D is an abelian C*-subalgebra of C which is regular in C. When D is a MASA in C, there exists a unique completely positive unital map E of C into the injective envelope I(D) of D whose restriction to D is the identity on D. We show that the left kernel of E is the unique closed two-sided ideal of C maximal with respect to having trivial intersection with D. We introduce a new class of well behaved state extensions, the compatible states; we identify compatible states when D is a MASA in C in terms of groups constructed from local dynamics near a pure state on D. When C is separable, D is a MASA in C, and the pair (C,D) is regular, the set of pure states on D with unique state extensions to C is dense in D. The map E can be used as a substitute for a conditional expectation in the construction of coordinates for C relative to D. We show that certain classes of compatible states have natural groupoid operations, and we show that constructions of Kumjian and Renau...
]Space Shuttle Independent Assessment Team
2000-01-01
The Shuttle program is one of the most complex engineering activities undertaken anywhere in the world at the present time. The Space Shuttle Independent Assessment Team (SIAT) was chartered in September 1999 by NASA to provide an independent review of the Space Shuttle sub-systems and maintenance practices. During the period from October through December 1999, the team led by Dr. McDonald and comprised of NASA, contractor, and DOD experts reviewed NASA practices, Space Shuffle anomalies, as well as civilian and military aerospace experience. In performing the review, much of a very positive nature was observed by the SIAT, not the least of which was the skill and dedication of the workforce. It is in the unfortunate nature of this type of review that the very positive elements are either not mentioned or dwelt upon. This very complex program has undergone a massive change in structure in the last few years with the transition to a slimmed down, contractor-run operation, the Shuttle Flight Operations Contract (SFOC). This has been accomplished with significant cost savings and without a major incident. This report has identified significant problems that must be addressed to maintain an effective program. These problems are described in each of the Issues, Findings or Observations summarized, and unless noted, appear to be systemic in nature and not confined to any one Shuttle sub-system or element. Specifics are given in the body of the report, along with recommendations to improve the present systems.
Evolutionary internalized regularities.
Schwartz, R
2001-08-01
Roger Shepard's proposals and supporting experiments concerning evolutionary internalized regularities have been very influential in the study of vision and in other areas of psychology and cognitive science. This paper examines issues concerning the need, nature, explanatory role, and justification for postulating such internalized constraints. In particular, I seek further clarification from Shepard on how best to understand his claim that principles of kinematic geometry underlie phenomena of motion perception. My primary focus is on the ecological validity of Shepard's kinematic constraint in the context of ordinary motion perception. First, I explore the analogy Shepard draws between internalized circadian rhythms and the supposed internalization of kinematic geometry. Next, questions are raised about how to interpret and justify applying results from his own and others' experimental studies of apparent motion to more everyday cases of motion perception in richer environments. Finally, some difficulties with Shepard's account of the evolutionary development of his kinematic constraint are considered.
Adaptive Regularization of Neural Classifiers
Andersen, Lars Nonboe; Larsen, Jan; Hansen, Lars Kai
1997-01-01
We present a regularization scheme which iteratively adapts the regularization parameters by minimizing the validation error. It is suggested to use the adaptive regularization scheme in conjunction with optimal brain damage pruning to optimize the architecture and to avoid overfitting. Furthermo...
Space shuttle and life sciences
Mason, J. A.
1977-01-01
During the 1980's, some 200 Spacelab missions will be flown on space shuttle in earth-orbit. Within these 200 missions, it is planned that at least 20 will be dedicated to life sciences research, projects which are yet to be outlined by the life sciences community. Objectives of the Life Sciences Shuttle/Spacelab Payloads Program are presented. Also discussed are major space life sciences programs including space medicine and physiology, clinical medicine, life support technology, and a variety of space biology topics. The shuttle, spacelab, and other life sciences payload carriers are described. Concepts for carry-on experiment packages, mini-labs, shared and dedicated spacelabs, as well as common operational research equipment (CORE) are reviewed. Current NASA planning and development includes Spacelab Mission Simulations, an Announcement of Planning Opportunity for Life Sciences, and a forthcoming Announcement of Opportunity for Flight Experiments which will together assist in forging a Life Science Program in space.
Space Shuttle flight control system
Klinar, W. J.; Kubiak, E. T.; Peters, W. H.; Saldana, R. L.; Smith, E. E., Jr.; Stegall, H. W.
1975-01-01
The Space Shuttle is a control stabilized vehicle with control provided by an all digital, fly-by-wire flight control system. This paper gives a description of the several modes of flight control which correspond to the Shuttle mission phases. These modes are ascent flight control (including open loop first stage steering, the use of four computers operating in parallel and inertial guidance sensors), on-orbit flight control (with a discussion of reaction control, phase plane switching logic, jet selection logic, state estimator logic and OMS thrust vector control), entry flight control and TAEM (terminal area energy management to landing). Also discussed are redundancy management and backup flight control.
Shuttle Propulsion Overview to NATO
Lightfoot, Robert
2006-01-01
In the early morning on Saturday, February 1, 2003, the Space Shuttle Columbia broke up during entry. After extensive investigation of the accident and recommendations made by the Columbia Accident Investigation Board, President Bush gave the vision for space exploration for NASA, which include return the Space Shuttle to flight as soon as practical, complete assembly of the ISS by the end of the decade, initiate robotic missions to the moon no later than 2008, develop a new Crew Exploration Vehicle, conduct first robotic, then human missions to Mars and extend human exploration across the solar system.
Bambi, Cosimo
2013-01-01
The formation of spacetime singularities is a quite common phenomenon in General Relativity and it is regulated by specific theorems. It is widely believed that spacetime singularities do not exist in Nature, but that they represent a limitation of the classical theory. While we do not yet have any solid theory of quantum gravity, toy models of black hole solutions without singularities have been proposed. So far, there are only non-rotating regular black holes in the literature. These metrics can be hardly tested by astrophysical observations, as the black hole spin plays a fundamental role in any astrophysical process. In this letter, we apply the Newman-Janis algorithm to the Hayward and to the Bardeen black hole metrics. In both cases, we obtain a family of rotating solutions. Every solution corresponds to a different matter configuration. Each family has one solution with special properties, which can be written in Kerr-like form in Boyer-Lindquist coordinates. These special solutions are of Petrov type ...
Bambi, Cosimo, E-mail: bambi@fudan.edu.cn; Modesto, Leonardo, E-mail: lmodesto@fudan.edu.cn
2013-04-25
The formation of spacetime singularities is a quite common phenomenon in General Relativity and it is regulated by specific theorems. It is widely believed that spacetime singularities do not exist in Nature, but that they represent a limitation of the classical theory. While we do not yet have any solid theory of quantum gravity, toy models of black hole solutions without singularities have been proposed. So far, there are only non-rotating regular black holes in the literature. These metrics can be hardly tested by astrophysical observations, as the black hole spin plays a fundamental role in any astrophysical process. In this Letter, we apply the Newman–Janis algorithm to the Hayward and to the Bardeen black hole metrics. In both cases, we obtain a family of rotating solutions. Every solution corresponds to a different matter configuration. Each family has one solution with special properties, which can be written in Kerr-like form in Boyer–Lindquist coordinates. These special solutions are of Petrov type D, they are singularity free, but they violate the weak energy condition for a non-vanishing spin and their curvature invariants have different values at r=0 depending on the way one approaches the origin. We propose a natural prescription to have rotating solutions with a minimal violation of the weak energy condition and without the questionable property of the curvature invariants at the origin.
Ensemble manifold regularization.
Geng, Bo; Tao, Dacheng; Xu, Chao; Yang, Linjun; Hua, Xian-Sheng
2012-06-01
We propose an automatic approximation of the intrinsic manifold for general semi-supervised learning (SSL) problems. Unfortunately, it is not trivial to define an optimization function to obtain optimal hyperparameters. Usually, cross validation is applied, but it does not necessarily scale up. Other problems derive from the suboptimality incurred by discrete grid search and the overfitting. Therefore, we develop an ensemble manifold regularization (EMR) framework to approximate the intrinsic manifold by combining several initial guesses. Algorithmically, we designed EMR carefully so it 1) learns both the composite manifold and the semi-supervised learner jointly, 2) is fully automatic for learning the intrinsic manifold hyperparameters implicitly, 3) is conditionally optimal for intrinsic manifold approximation under a mild and reasonable assumption, and 4) is scalable for a large number of candidate manifold hyperparameters, from both time and space perspectives. Furthermore, we prove the convergence property of EMR to the deterministic matrix at rate root-n. Extensive experiments over both synthetic and real data sets demonstrate the effectiveness of the proposed framework.
Regular Bisimple ω2-semigroups
汪立民; 商宇
2008-01-01
@@ The regular semigroups S with an idempotent set Es = {e0,e1,…,en,…} such that e0 ＞ e1 ＞…＞ en ＞… is called a regular ω-semigroup. In [5] Reilly determined the structure of a regular bisimple ω-semigroup as BR(G,θ),which is the classical Bruck-Reilly extension of a group G.
Completely regular fuzzifying topological spaces
A. K. Katsaras
2005-12-01
Full Text Available Some of the properties of the completely regular fuzzifying topological spaces are investigated. It is shown that a fuzzifying topology ÃÂ„ is completely regular if and only if it is induced by some fuzzy uniformity or equivalently by some fuzzifying proximity. Also, ÃÂ„ is completely regular if and only if it is generated by a family of probabilistic pseudometrics.
On regular rotating black holes
Torres, R.; Fayos, F.
2017-01-01
Different proposals for regular rotating black hole spacetimes have appeared recently in the literature. However, a rigorous analysis and proof of the regularity of this kind of spacetimes is still lacking. In this note we analyze rotating Kerr-like black hole spacetimes and find the necessary and sufficient conditions for the regularity of all their second order scalar invariants polynomial in the Riemann tensor. We also show that the regularity is linked to a violation of the weak energy conditions around the core of the rotating black hole.
Constrained and regularized system identification
Tor A. Johansen
1998-04-01
Full Text Available Prior knowledge can be introduced into system identification problems in terms of constraints on the parameter space, or regularizing penalty functions in a prediction error criterion. The contribution of this work is mainly an extension of the well known FPE (Final Production Error statistic to the case when the system identification problem is constrained and contains a regularization penalty. The FPECR statistic (Final Production Error with Constraints and Regularization is of potential interest as a criterion for selection of both regularization parameters and structural parameters such as order.
On regular rotating black holes
Torres, Ramon
2016-01-01
Different proposals for regular rotating black hole spacetimes have appeared recently in the literature. However, a rigorous analysis and proof of the regularity of this kind of spacetimes is still lacking. In this note we analyze rotating Kerr-like black hole spacetimes and find the necessary and sufficient conditions for the regularity of all their second order scalar invariants polynomial in the Riemann tensor. We also show that the regularity is linked to a violation of the weak energy conditions around the core of the rotating black hole.
CHEN Huan Yin; LI Fu An
2002-01-01
In this paper, we investigate ideals of regular rings and give several characterizations for an ideal to satisfy the comparability. In addition, it is shown that, if Ⅰ is a minimal two-sided ideal of a regular ring R, then Ⅰ satisfies the comparability if and only if Ⅰ is separative. Furthermore, we prove that, for ideals with stable range one, Roth's problem has an affirmative solution. These extend the corresponding results on unit-regularity and one-sided unit-regularity.
DIMETHYL ETHER (DME)-FUELED SHUTTLE BUS DEMONSTRATION PROJECT
Elana M. Chapman; Shirish Bhide; Jennifer Stefanik; Howard Glunt; Andre L. Boehman; Allen Homan; David Klinikowski
2003-04-01
the bus, operation on the campus shuttle route began in early June 2002. However, the work and challenges continued as it has been difficult to maintain operability of the shuttle bus due to fuel and component difficulties. In late June 2002, the pump head itself developed operational problems (loss of smooth function) leading to excessive stress on the magnetic coupling and excessive current draw to operate. A new pump head was installed on the system to alleviate this problem and the shuttle bus operated successfully on DME blends from 10-25 vol% on the shuttle bus loop until September 30, 2002. During the period of operation on the campus loop, the bus was pulled from service, operated at the PTI test track and real-time emissions measurements were obtained using an on-board emissions analyzer from Clean Air Technologies International, Inc. Particulate emissions reductions of 60% and 80% were observed at DME blend ratios of 12 vol.% and 25 vol.%, respectively, as the bus was operated over the Orange County driving cycle. Increases in NOx, CO and HC emissions were observed, however. In summary, the conversion of the shuttle bus was successfully accomplished, particulate emissions reductions were observed, but there were operational challenges in the field. Nonetheless, they were able to demonstrate reliable operation of the shuttle bus on DME-diesel blends.
EnviroNET - The Space Environment Information Service
Lauriente, Michael
1991-01-01
The recent development of EnviroNET, the Space Environment Information Service, is discussed. The activities pursued by the Space Shuttle Working Group to establish a user-friendly database of current information on the Space Shuttle environment are described.
Regularly timed events amid chaos
Blakely, Jonathan N.; Cooper, Roy M.; Corron, Ned J.
2015-11-01
We show rigorously that the solutions of a class of chaotic oscillators are characterized by regularly timed events in which the derivative of the solution is instantaneously zero. The perfect regularity of these events is in stark contrast with the well-known unpredictability of chaos. We explore some consequences of these regularly timed events through experiments using chaotic electronic circuits. First, we show that a feedback loop can be implemented to phase lock the regularly timed events to a periodic external signal. In this arrangement the external signal regulates the timing of the chaotic signal but does not strictly lock its phase. That is, phase slips of the chaotic oscillation persist without disturbing timing of the regular events. Second, we couple the regularly timed events of one chaotic oscillator to those of another. A state of synchronization is observed where the oscillators exhibit synchronized regular events while their chaotic amplitudes and phases evolve independently. Finally, we add additional coupling to synchronize the amplitudes, as well, however in the opposite direction illustrating the independence of the amplitudes from the regularly timed events.
Online co-regularized algorithms
Ruijter, T. de; Tsivtsivadze, E.; Heskes, T.
2012-01-01
We propose an online co-regularized learning algorithm for classification and regression tasks. We demonstrate that by sequentially co-regularizing prediction functions on unlabeled data points, our algorithm provides improved performance in comparison to supervised methods on several UCI benchmarks
Online co-regularized algorithms
Ruijter, T. de; Tsivtsivadze, E.; Heskes, T.
2012-01-01
We propose an online co-regularized learning algorithm for classification and regression tasks. We demonstrate that by sequentially co-regularizing prediction functions on unlabeled data points, our algorithm provides improved performance in comparison to supervised methods on several UCI benchmarks
Nonconvex Regularization in Remote Sensing
Tuia, Devis; Flamary, Remi; Barlaud, Michel
2016-11-01
In this paper, we study the effect of different regularizers and their implications in high dimensional image classification and sparse linear unmixing. Although kernelization or sparse methods are globally accepted solutions for processing data in high dimensions, we present here a study on the impact of the form of regularization used and its parametrization. We consider regularization via traditional squared (2) and sparsity-promoting (1) norms, as well as more unconventional nonconvex regularizers (p and Log Sum Penalty). We compare their properties and advantages on several classification and linear unmixing tasks and provide advices on the choice of the best regularizer for the problem at hand. Finally, we also provide a fully functional toolbox for the community.
Conservative regularization of compressible flow
Krishnaswami, Govind S; Thyagaraja, Anantanarayanan
2015-01-01
Ideal Eulerian flow may develop singularities in vorticity w. Navier-Stokes viscosity provides a dissipative regularization. We find a local, conservative regularization - lambda^2 w times curl(w) of compressible flow and compressible MHD: a three dimensional analogue of the KdV regularization of the one dimensional kinematic wave equation. The regulator lambda is a field subject to the constitutive relation lambda^2 rho = constant. Lambda is like a position-dependent mean-free path. Our regularization preserves Galilean, parity and time-reversal symmetries. We identify locally conserved energy, helicity, linear and angular momenta and boundary conditions ensuring their global conservation. Enstrophy is shown to remain bounded. A swirl velocity field is identified, which transports w/rho and B/rho generalizing the Kelvin-Helmholtz and Alfven theorems. A Hamiltonian and Poisson bracket formulation is given. The regularized equations are used to model a rotating vortex, channel flow, plane flow, a plane vortex ...
Approximate Sparse Regularized Hyperspectral Unmixing
Chengzhi Deng
2014-01-01
Full Text Available Sparse regression based unmixing has been recently proposed to estimate the abundance of materials present in hyperspectral image pixel. In this paper, a novel sparse unmixing optimization model based on approximate sparsity, namely, approximate sparse unmixing (ASU, is firstly proposed to perform the unmixing task for hyperspectral remote sensing imagery. And then, a variable splitting and augmented Lagrangian algorithm is introduced to tackle the optimization problem. In ASU, approximate sparsity is used as a regularizer for sparse unmixing, which is sparser than l1 regularizer and much easier to be solved than l0 regularizer. Three simulated and one real hyperspectral images were used to evaluate the performance of the proposed algorithm in comparison to l1 regularizer. Experimental results demonstrate that the proposed algorithm is more effective and accurate for hyperspectral unmixing than state-of-the-art l1 regularizer.
ZOU Zhi-Yun; MAO Bao-Hua; HAO Hai-Ming; GAO Jian-Zhi; YANG Jie-Jiao
2009-01-01
According to the deficiencies in Watts and Strogatz's small-world network model, we present a new regular model to establish the small-world network. Besides the property of the small-world, this model has other properties such as accuracy in controlling the average shortest path length L, and the average clustering coefficient C, also regular network topology as well as enhanced network robustness. This method improves the construction of the small-world network essentially, so that the regular small-world network closely resembles the actual network. We also present studies on the relationships among the quantities of a variety of edges, L and C in regular small-world network in detail. This research lays the foundation for the establishment of the regular small-world network and acts as a good guidance for further research of this model and its applications.
A Criterion for Regular Sequences
D P Patil; U Storch; J Stückrad
2004-05-01
Let be a commutative noetherian ring and $f_1,\\ldots,f_r \\in R$. In this article we give (cf. the Theorem in $\\mathcal{x}$2) a criterion for $f_1,\\ldots,f_r$ to be regular sequence for a finitely generated module over which strengthens and generalises a result in [2]. As an immediate consequence we deduce that if $V(g_1,\\ldots,g_r) \\subseteq V(f_1,\\ldots,f_r)$ in Spec and if $f_1,\\ldots,f_r$ is a regular sequence in , then $g_1,\\ldots,g_r$ is also a regular sequence in .
Huanyin CHEN
2009-01-01
The necessary and sufficient conditions under which a ring satisfies regular power-substitution are investigated. It is shown that a ring R satisfies regular power-substitution if and only if a(-～)b in R implies that there exist n ∈ N and a U ∈ GLn(R) such that aU =Ub if and only if for any regular x ∈ R there exist m,n ∈ N and U ∈ GLn(R) such that xmIn = xmUxm, where a(-～)b means that there exists x, y, z ∈ R such that a = ybx, b = xaz and x = xyx = xzx. It is proved that every directly finite simple ring satisfies regular power-substitution. Some applications for stably free R-modules are also obtained.
Space Shuttle and Hypersonic Entry
Campbell, Charles H.; Gerstenmaier, William H.
2014-01-01
Fifty years of human spaceflight have been characterized by the aerospace operations of the Soyuz, of the Space Shuttle and, more recently, of the Shenzhou. The lessons learned of this past half decade are important and very significant. Particularly interesting is the scenario that is downstream from the retiring of the Space Shuttle. A number of initiatives are, in fact, emerging from in the aftermath of the decision to terminate the Shuttle program. What is more and more evident is that a new era is approaching: the era of the commercial usage and of the commercial exploitation of space. It is probably fair to say, that this is the likely one of the new frontiers of expansion of the world economy. To make a comparison, in the last 30 years our economies have been characterized by the digital technologies, with examples ranging from computers, to cellular phones, to the satellites themselves. Similarly, the next 30 years are likely to be characterized by an exponential increase of usage of extra atmospheric resources, as a result of more economic and efficient way to access space, with aerospace transportation becoming accessible to commercial investments. We are witnessing the first steps of the transportation of future generation that will drastically decrease travel time on our Planet, and significantly enlarge travel envelope including at least the low Earth orbits. The Steve Jobs or the Bill Gates of the past few decades are being replaced by the aggressive and enthusiastic energy of new entrepreneurs. It is also interesting to note that we are now focusing on the aerospace band, that lies on top of the aeronautical shell, and below the low Earth orbits. It would be a mistake to consider this as a known envelope based on the evidences of the flights of Soyuz, Shuttle and Shenzhou. Actually, our comprehension of the possible hypersonic flight regimes is bounded within really limited envelopes. The achievement of a full understanding of the hypersonic flight
Space Shuttle and Hypersonic Entry
Campbell, Charles H.; Gerstenmaier, William H.
2014-01-01
Fifty years of human spaceflight have been characterized by the aerospace operations of the Soyuz, of the Space Shuttle and, more recently, of the Shenzhou. The lessons learned of this past half decade are important and very significant. Particularly interesting is the scenario that is downstream from the retiring of the Space Shuttle. A number of initiatives are, in fact, emerging from in the aftermath of the decision to terminate the Shuttle program. What is more and more evident is that a new era is approaching: the era of the commercial usage and of the commercial exploitation of space. It is probably fair to say, that this is the likely one of the new frontiers of expansion of the world economy. To make a comparison, in the last 30 years our economies have been characterized by the digital technologies, with examples ranging from computers, to cellular phones, to the satellites themselves. Similarly, the next 30 years are likely to be characterized by an exponential increase of usage of extra atmospheric resources, as a result of more economic and efficient way to access space, with aerospace transportation becoming accessible to commercial investments. We are witnessing the first steps of the transportation of future generation that will drastically decrease travel time on our Planet, and significantly enlarge travel envelope including at least the low Earth orbits. The Steve Jobs or the Bill Gates of the past few decades are being replaced by the aggressive and enthusiastic energy of new entrepreneurs. It is also interesting to note that we are now focusing on the aerospace band, that lies on top of the aeronautical shell, and below the low Earth orbits. It would be a mistake to consider this as a known envelope based on the evidences of the flights of Soyuz, Shuttle and Shenzhou. Actually, our comprehension of the possible hypersonic flight regimes is bounded within really limited envelopes. The achievement of a full understanding of the hypersonic flight
NONCONVEX REGULARIZATION FOR SHAPE PRESERVATION
CHARTRAND, RICK [Los Alamos National Laboratory
2007-01-16
The authors show that using a nonconvex penalty term to regularize image reconstruction can substantially improve the preservation of object shapes. The commonly-used total-variation regularization, {integral}|{del}u|, penalizes the length of the object edges. They show that {integral}|{del}u|{sup p}, 0 < p < 1, only penalizes edges of dimension at least 2-p, and thus finite-length edges not at all. We give numerical examples showing the resulting improvement in shape preservation.
Regularization with a pruning prior
Goutte, Cyril; Hansen, Lars Kai
1997-01-01
We investigate the use of a regularization priorthat we show has pruning properties. Analyses areconducted both using a Bayesian framework and withthe generalization method, on a simple toyproblem. Results are thoroughly compared withthose obtained with a traditional weight decay.......We investigate the use of a regularization priorthat we show has pruning properties. Analyses areconducted both using a Bayesian framework and withthe generalization method, on a simple toyproblem. Results are thoroughly compared withthose obtained with a traditional weight decay....
Regular and Periodic Tachyon Kinks
Bazeia, D.; Menezes, R.; Ramos, J. G.
2004-01-01
We search for regular tachyon kinks in an extended model, which includes the tachyon action recently proposed to describe the tachyon field. The extended model that we propose adds a new contribution to the tachyon action, and seems to enrich the present scenario for the tachyon field. We have found stable tachyon kinks of regular profile, which may appropriately lead to the singular kink found by Sen sometime ago. Also, under specific conditions we may find periodic array of kink-antikink co...
Shervin Sahebi
2014-05-01
Full Text Available $R$ is called commuting regular ring (resp. semigroupif for each $x,y\\in R$ there exists $a\\in R$ such that$xy=yxayx$. In this paper, we introduce the concept ofcommuting $\\pi$-regular rings (resp. semigroups andstudy various properties of them.
Condition Number Regularized Covariance Estimation.
Won, Joong-Ho; Lim, Johan; Kim, Seung-Jean; Rajaratnam, Bala
2013-06-01
Estimation of high-dimensional covariance matrices is known to be a difficult problem, has many applications, and is of current interest to the larger statistics community. In many applications including so-called the "large p small n" setting, the estimate of the covariance matrix is required to be not only invertible, but also well-conditioned. Although many regularization schemes attempt to do this, none of them address the ill-conditioning problem directly. In this paper, we propose a maximum likelihood approach, with the direct goal of obtaining a well-conditioned estimator. No sparsity assumption on either the covariance matrix or its inverse are are imposed, thus making our procedure more widely applicable. We demonstrate that the proposed regularization scheme is computationally efficient, yields a type of Steinian shrinkage estimator, and has a natural Bayesian interpretation. We investigate the theoretical properties of the regularized covariance estimator comprehensively, including its regularization path, and proceed to develop an approach that adaptively determines the level of regularization that is required. Finally, we demonstrate the performance of the regularized estimator in decision-theoretic comparisons and in the financial portfolio optimization setting. The proposed approach has desirable properties, and can serve as a competitive procedure, especially when the sample size is small and when a well-conditioned estimator is required.
Condition Number Regularized Covariance Estimation*
Won, Joong-Ho; Lim, Johan; Kim, Seung-Jean; Rajaratnam, Bala
2012-01-01
Estimation of high-dimensional covariance matrices is known to be a difficult problem, has many applications, and is of current interest to the larger statistics community. In many applications including so-called the “large p small n” setting, the estimate of the covariance matrix is required to be not only invertible, but also well-conditioned. Although many regularization schemes attempt to do this, none of them address the ill-conditioning problem directly. In this paper, we propose a maximum likelihood approach, with the direct goal of obtaining a well-conditioned estimator. No sparsity assumption on either the covariance matrix or its inverse are are imposed, thus making our procedure more widely applicable. We demonstrate that the proposed regularization scheme is computationally efficient, yields a type of Steinian shrinkage estimator, and has a natural Bayesian interpretation. We investigate the theoretical properties of the regularized covariance estimator comprehensively, including its regularization path, and proceed to develop an approach that adaptively determines the level of regularization that is required. Finally, we demonstrate the performance of the regularized estimator in decision-theoretic comparisons and in the financial portfolio optimization setting. The proposed approach has desirable properties, and can serve as a competitive procedure, especially when the sample size is small and when a well-conditioned estimator is required. PMID:23730197
Green, Jan
2009-01-01
This viewgraph presentation gives a detailed description of the avionics associated with the Space Shuttle's data processing system and its usage of z/OS. The contents include: 1) Mission, Products, and Customers; 2) Facility Overview; 3) Shuttle Data Processing System; 4) Languages and Compilers; 5) Application Tools; 6) Shuttle Flight Software Simulator; 7) Software Development and Build Tools; and 8) Fun Facts and Acronyms.
Space Shuttle Main Engine Public Test Firing
2000-01-01
A new NASA Space Shuttle Main Engine (SSME) roars to the approval of more than 2,000 people who came to John C. Stennis Space Center in Hancock County, Miss., on July 25 for a flight-certification test of the SSME Block II configuration. The engine, a new and significantly upgraded shuttle engine, was delivered to NASA's Kennedy Space Center in Florida for use on future shuttle missions. Spectators were able to experience the 'shake, rattle and roar' of the engine, which ran for 520 seconds - the length of time it takes a shuttle to reach orbit.
Shot noise of a quantum shuttle
Novotny, Tomas; Donarini, Andrea; Flindt, Christian
2004-01-01
even in the quantum limit, confirming that shuttling is universally a low noise phenomenon. In approaching the semiclassical limit, the Fano factor shows a giant enhancement (Fsimilar or equal to10(2)) at the shuttling threshold, consistent with predictions based on phase-space representations......We formulate a theory for shot noise in quantum nanoelectromechanical systems. As a specific example, the theory is applied to a quantum shuttle, and the zero-frequency noise, measured by the Fano factor F, is computed. F reaches very low values (Fsimilar or equal to10(-2)) in the shuttling regime...
Quotient Complexity of Regular Languages
Janusz Brzozowski
2009-07-01
Full Text Available The past research on the state complexity of operations on regular languages is examined, and a new approach based on an old method (derivatives of regular expressions is presented. Since state complexity is a property of a language, it is appropriate to define it in formal-language terms as the number of distinct quotients of the language, and to call it "quotient complexity". The problem of finding the quotient complexity of a language f(K,L is considered, where K and L are regular languages and f is a regular operation, for example, union or concatenation. Since quotients can be represented by derivatives, one can find a formula for the typical quotient of f(K,L in terms of the quotients of K and L. To obtain an upper bound on the number of quotients of f(K,L all one has to do is count how many such quotients are possible, and this makes automaton constructions unnecessary. The advantages of this point of view are illustrated by many examples. Moreover, new general observations are presented to help in the estimation of the upper bounds on quotient complexity of regular operations.
Ratanpal B S; Sharma Jaita
2016-03-01
The charged anisotropic star on paraboloidal space-time is reported by choosing a particular form of radial pressure and electric field intensity. The non-singular solution of Einstein–Maxwell system of equation has been derived and it is shown that the model satisfies all the physical plausibility conditions. It is observed that in the absence of electric field intensity, the model reducesto a particular case of uncharged Sharma and Ratanpal model. It is also observed that the parameter used in the electric field intensity directly affects mass of the star.
Efficient Hyperelastic Regularization for Registration
Darkner, Sune; Hansen, Michael Sass; Larsen, Rasmus;
2011-01-01
For most image registration problems a smooth one-to-one mapping is desirable, a diffeomorphism. This can be obtained using priors such as volume preservation, certain kinds of elasticity or both. The key principle is to regularize the strain of the deformation which can be done through penalizat......For most image registration problems a smooth one-to-one mapping is desirable, a diffeomorphism. This can be obtained using priors such as volume preservation, certain kinds of elasticity or both. The key principle is to regularize the strain of the deformation which can be done through...... penalization of the eigen values of the stress tensor. We present a computational framework for regularization of image registration for isotropic hyper elasticity. We formulate an efficient and parallel scheme for computing the principal stain based for a given parameterization by decomposing the left Cauchy...
Current Noise Spectrum of a Quantum Shuttle
Flindt, Christian; Novotny, T.; Jauho, Antti-Pekka
2005-01-01
We present a method for calculating the full current noise spectrum S(omega) for the class of nano-electromechanical systems (NEMS) that can be described by a Markovian generalized master equation. As a specific example we apply the method to a quantum shuttle. The noise spectrum of the shuttle h...
Shuttle onboard IMU alignment methods
Henderson, D. M.
1976-01-01
The current approach to the shuttle IMU alignment is based solely on the Apollo Deterministic Method. This method is simple, fast, reliable and provides an accurate estimate for the present cluster to mean of 1,950 transformation matrix. If four or more star sightings are available, the application of least squares analysis can be utilized. The least squares method offers the next level of sophistication to the IMU alignment solution. The least squares method studied shows that a more accurate estimate for the misalignment angles is computed, and the IMU drift rates are a free by-product of the analysis. Core storage requirements are considerably more; estimated 20 to 30 times the core required for the Apollo Deterministic Method. The least squares method offers an intermediate solution utilizing as much data that is available without a complete statistical analysis as in Kalman filtering.
Reentry guidance for Space Shuttle
Causey, W.; Sohoni, V.
1973-01-01
An explicit guidance scheme is outlined which provides the appropriate energy management in order for the shuttle orbiter to reach any location within the required footprint. Considering the orbiter as entering the earth's atmosphere, expressions for the downrange, crossrange, and the time of the termination of the entry phase as functions of the control variables are developed. Performing an order-of-magnitude analysis of the terms in these expressions, only dominant terms are retained. Analytical expressions for the elements of the sensitivity matrix which represents the partial derivatives of the desired range with respect to control variables are formulated. Using the Gauss-Jordan inversion technique, the required change in guidance commands as a function of the deviations in the downrange and crossrange are explicitly computed.
Reentry guidance for Space Shuttle
Causey, W.; Sohoni, V.
1973-01-01
An explicit guidance scheme is outlined which provides the appropriate energy management in order for the shuttle orbiter to reach any location within the required footprint. Considering the orbiter as entering the earth's atmosphere, expressions for the downrange, crossrange, and the time of the termination of the entry phase as functions of the control variables are developed. Performing an order-of-magnitude analysis of the terms in these expressions, only dominant terms are retained. Analytical expressions for the elements of the sensitivity matrix which represents the partial derivatives of the desired range with respect to control variables are formulated. Using the Gauss-Jordan inversion technique, the required change in guidance commands as a function of the deviations in the downrange and crossrange are explicitly computed.
Nucleocytoplasmic shuttling of transcription factors
Cartwright, P; Helin, K
2000-01-01
To elicit the transcriptional response following intra- or extracellular stimuli, the signals need to be transmitted to their site of action within the nucleus. The nucleocytoplasmic shuttling of transcription factors is a mechanism mediating this process. The activation and inactivation...... of the transcriptional response is essential for cells to progress through the cell cycle in a normal manner. The involvement of cytoplasmic and nuclear accessory molecules, and the general nuclear membrane transport components, are essential for this process. Although nuclear import and export for different...... transcription factor families are regulated by similar mechanisms, there are several differences that allow for the specific activation of each transcription factor. This review discusses the general import and export pathways found to be common amongst many different transcription factors, and highlights...
Nucleocytoplasmic shuttling of transcription factors
Cartwright, P; Helin, K
2000-01-01
To elicit the transcriptional response following intra- or extracellular stimuli, the signals need to be transmitted to their site of action within the nucleus. The nucleocytoplasmic shuttling of transcription factors is a mechanism mediating this process. The activation and inactivation...... transcription factor families are regulated by similar mechanisms, there are several differences that allow for the specific activation of each transcription factor. This review discusses the general import and export pathways found to be common amongst many different transcription factors, and highlights...... of the transcriptional response is essential for cells to progress through the cell cycle in a normal manner. The involvement of cytoplasmic and nuclear accessory molecules, and the general nuclear membrane transport components, are essential for this process. Although nuclear import and export for different...
Regular algebra and finite machines
Conway, John Horton
2012-01-01
World-famous mathematician John H. Conway based this classic text on a 1966 course he taught at Cambridge University. Geared toward graduate students of mathematics, it will also prove a valuable guide to researchers and professional mathematicians.His topics cover Moore's theory of experiments, Kleene's theory of regular events and expressions, Kleene algebras, the differential calculus of events, factors and the factor matrix, and the theory of operators. Additional subjects include event classes and operator classes, some regulator algebras, context-free languages, communicative regular alg
Space Shuttle Orbiter-Illustration
2001-01-01
This illustration is an orbiter cutaway view with callouts. The orbiter is both the brains and heart of the Space Transportation System (STS). About the same size and weight as a DC-9 aircraft, the orbiter contains the pressurized crew compartment (which can normally carry up to seven crew members), the huge cargo bay, and the three main engines mounted on its aft end. There are three levels to the crew cabin. Uppermost is the flight deck where the commander and the pilot control the mission. The middeck is where the gallery, toilet, sleep stations, and storage and experiment lockers are found for the basic needs of weightless daily living. Also located in the middeck is the airlock hatch into the cargo bay and space beyond. It is through this hatch and airlock that astronauts go to don their spacesuits and marned maneuvering units in preparation for extravehicular activities, more popularly known as spacewalks. The Space Shuttle's cargo bay is adaptable to hundreds of tasks. Large enough to accommodate a tour bus (60 x 15 feet or 18.3 x 4.6 meters), the cargo bay carries satellites, spacecraft, and spacelab scientific laboratories to and from Earth orbit. It is also a work station for astronauts to repair satellites, a foundation from which to erect space structures, and a hold for retrieved satellites to be returned to Earth. Thermal tile insulation and blankets (also known as the thermal protection system or TPS) cover the underbelly, bottom of the wings, and other heat-bearing surfaces of the orbiter to protect it during its fiery reentry into the Earth's atmosphere. The Shuttle's 24,000 individual tiles are made primarily of pure-sand silicate fibers, mixed with a ceramic binder. The solid rocket boosters (SRB's) are designed as an in-house Marshall Space Flight Center project, with United Space Boosters as the assembly and refurbishment contractor. The solid rocket motor (SRM) is provided by the Morton Thiokol Corporation.
IMPORTANT NOTICE: Cancellation of shuttle Circuit 3
2013-01-01
Circuit 3 of the CERN Shuttle Service (Point 5), which has served CMS since the start of LS1, will be cancelled with effect from Tuesday 16 April. This decision has been taken in consultation with CMS, as the circuit was seldom used. In response to increasing demand for Circuit 1 - Meyrin and feedback from passengers, the two Circuit 3 journeys will be switched to Circuit 1 – Meyrin (see new timetable below): Mornings: Four journeys instead of three. Circuit 1 now starts at 8:10 (instead of 8:19 a.m.) and runs until 9:27 a.m. (instead of 9:16 a.m.). Lunchtimes: Five journeys in place between 12:10 p.m. and 1:47 p.m. Evenings: Circuit starts at 5:23 p.m. (instead of 5:03 p.m.) and ends at 6:20 p.m. at Building 33. Please note that the circuit will depart from Building 13 instead of Building 33.
Regularized Statistical Analysis of Anatomy
Sjöstrand, Karl
2007-01-01
This thesis presents the application and development of regularized methods for the statistical analysis of anatomical structures. Focus is on structure-function relationships in the human brain, such as the connection between early onset of Alzheimer’s disease and shape changes of the corpus cal...
Regularization in Matrix Relevance Learning
Schneider, Petra; Bunte, Kerstin; Stiekema, Han; Hammer, Barbara; Villmann, Thomas; Biehl, Michael
2010-01-01
A In this paper, we present a regularization technique to extend recently proposed matrix learning schemes in learning vector quantization (LVQ). These learning algorithms extend the concept of adaptive distance measures in LVQ to the use of relevance matrices. In general, metric learning can displa
Singularities of slice regular functions
Stoppato, Caterina
2010-01-01
Beginning in 2006, G. Gentili and D.C. Struppa developed a theory of regular quaternionic functions with properties that recall classical results in complex analysis. For instance, in each Euclidean ball centered at 0 the set of regular functions coincides with that of quaternionic power series converging in the same ball. In 2009 the author proposed a classification of singularities of regular functions as removable, essential or as poles and studied poles by constructing the ring of quotients. In that article, not only the statements, but also the proving techniques were confined to the special case of balls centered at 0. In a subsequent paper, F. Colombo, G. Gentili, I. Sabadini and D.C. Struppa (2009) identified a larger class of domains, on which the theory of regular functions is natural and not limited to quaternionic power series. The present article studies singularities in this new context, beginning with the construction of the ring of quotients and of Laurent-type expansions at points other than ...
Regular inference as vertex coloring
Costa Florêncio, C.; Verwer, S.
2012-01-01
This paper is concerned with the problem of supervised learning of deterministic finite state automata, in the technical sense of identification in the limit from complete data, by finding a minimal DFA consistent with the data (regular inference). We solve this problem by translating it in its enti
Regularized Generalized Structured Component Analysis
Hwang, Heungsun
2009-01-01
Generalized structured component analysis (GSCA) has been proposed as a component-based approach to structural equation modeling. In practice, GSCA may suffer from multi-collinearity, i.e., high correlations among exogenous variables. GSCA has yet no remedy for this problem. Thus, a regularized extension of GSCA is proposed that integrates a ridge…
Regular inference as vertex coloring
Costa Florêncio, C.; Verwer, S.
2012-01-01
This paper is concerned with the problem of supervised learning of deterministic finite state automata, in the technical sense of identification in the limit from complete data, by finding a minimal DFA consistent with the data (regular inference). We solve this problem by translating it in its
2011-01-20
... meeting of the Board will be held at the offices of the Farm Credit Administration in McLean, Virginia, on...Lean, Virginia 22102. SUPPLEMENTARY INFORMATION: This meeting of the Board will be open to the ] public... CORPORATION Farm Credit System Insurance Corporation Board Regular Meeting SUMMARY: Notice is hereby given of...
Chemical Shuttle Additives in Lithium Ion Batteries
Patterson, Mary
2013-03-31
The goals of this program were to discover and implement a redox shuttle that is compatible with large format lithium ion cells utilizing LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} (NMC) cathode material and to understand the mechanism of redox shuttle action. Many redox shuttles, both commercially available and experimental, were tested and much fundamental information regarding the mechanism of redox shuttle action was discovered. In particular, studies surrounding the mechanism of the reduction of the oxidized redox shuttle at the carbon anode surface were particularly revealing. The initial redox shuttle candidate, namely 2-(pentafluorophenyl)-tetrafluoro-1,3,2-benzodioxaborole (BDB) supplied by Argonne National Laboratory (ANL, Lemont, Illinois), did not effectively protect cells containing NMC cathodes from overcharge. The ANL-RS2 redox shuttle molecule, namely 1,4-bis(2-methoxyethoxy)-2,5-di-tert-butyl-benzene, which is a derivative of the commercially successful redox shuttle 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB, 3M, St. Paul, Minnesota), is an effective redox shuttle for cells employing LiFePO{sub 4} (LFP) cathode material. The main advantage of ANL-RS2 over DDB is its larger solubility in electrolyte; however, ANL-RS2 is not as stable as DDB. This shuttle also may be effectively used to rebalance cells in strings that utilize LFP cathodes. The shuttle is compatible with both LTO and graphite anode materials although the cell with graphite degrades faster than the cell with LTO, possibly because of a reaction with the SEI layer. The degradation products of redox shuttle ANL-RS2 were positively identified. Commercially available redox shuttles Li{sub 2}B{sub 12}F{sub 12} (Air Products, Allentown, Pennsylvania and Showa Denko, Japan) and DDB were evaluated and were found to be stable and effective redox shuttles at low C-rates. The Li{sub 2}B{sub 12}F{sub 12} is suitable for lithium ion cells utilizing a high voltage cathode (potential that is higher
Recursively-regular subdivisions and applications
Rafel Jaume
2016-05-01
Full Text Available We generalize regular subdivisions (polyhedral complexes resulting from the projection of the lower faces of a polyhedron introducing the class of recursively-regular subdivisions. Informally speaking, a recursively-regular subdivision is a subdivision that can be obtained by splitting some faces of a regular subdivision by other regular subdivisions (and continue recursively. We also define the finest regular coarsening and the regularity tree of a polyhedral complex. We prove that recursively-regular subdivisions are not necessarily connected by flips and that they are acyclic with respect to the in-front relation. We show that the finest regular coarsening of a subdivision can be efficiently computed, and that whether a subdivision is recursively regular can be efficiently decided. As an application, we also extend a theorem known since 1981 on illuminating space by cones and present connections of recursive regularity to tensegrity theory and graph-embedding problems.
42 CFR 61.3 - Purpose of regular fellowships.
2010-10-01
... mental diseases and impairments of man, (2) the organization, provision, and financing of health services, (3) the causes, prevention, and control of air pollution, and (4) medical library and related health... 42 Public Health 1 2010-10-01 2010-10-01 false Purpose of regular fellowships. 61.3 Section...
5 CFR 551.421 - Regular working hours.
2010-01-01
... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Regular working hours. 551.421 Section 551.421 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work Application of Principles in Relation to...
Space Shuttle OMS engine valve technology. [Orbital Maneuvering System
Wichmann, H.
1974-01-01
Valve technology program to determine shutoff valve concepts suitable for the Orbital Maneuvering System (OMS) engine of the Space Shuttle. The tradeoff studies selected the electric torque motor operated dual poppet and ball valves as the most desirable valve concepts for the OMS Engine Shutoff Valve. A prototype of one of these concepts was built and subjected to a design verification program. A number of unique features were designed to include the required contamination insensitivity, operating fluid compatibility, decontamination capability, minimum maintenance requirement and long service life capability.
Academic Training Lecture Regular Programme
2012-01-01
AMS_02 Particle Physics Detector Technologies Orbiting the Earth (1/2), by Corrado Gargiulo (CERN). Thursday, April 19, 2012 from 11:00 to 12:30 (Europe/Zurich) at CERN ( 4-3-006 - TH Conference Room ) AMS-02 has taken the high performance technologies used in particle physics and implemented them for use in low Earth orbit. Safety aspects for the Space Shuttle flight, that carried AMS_02 to the International Space Station, Space environment and inaccessibility during the life of AMS_02 are some of the aspects which have driven the design of the experiment. The technical challenges to build such a detector have been surmounted through the close collaboration amongst the AMS scientists and industries around the world. Their efforts have resulted in the development of new technologies and higher standards of precision.
Advantages of a round-body shuttle
Arrington, James P.; Wells, William L.; Lepsch, Roger A., Jr.; Huffman, Jarrett K.; Macconochie, Ian O.
1989-01-01
A cylindrical fuselage cross-section SSTOV representing the design generation beyond the current NASA Space Shuttle has been projected capable of reducing the cost of payload delivery to orbit while increasing mission scope. Due to its intrinsically greater wetted-area and structural weight efficiencies, this cylindrical vehicle would carry 40 percent greater payload than the Space Shuttle system despite a 20-percent lower gross liftoff weight. A LOX/hydrocarbon fuel combination would be employed during the early portion of flight, thereupon shifting to LOX/hydrogen. The cylindrical SSTOV would have eight times the volume of the Space Shuttle Orbiter.
General inverse problems for regular variation
Damek, Ewa; Mikosch, Thomas Valentin; Rosinski, Jan
2014-01-01
Regular variation of distributional tails is known to be preserved by various linear transformations of some random structures. An inverse problem for regular variation aims at understanding whether the regular variation of a transformed random object is caused by regular variation of components ...
Regular Motions of Resonant Asteroids
Ferraz-Mello, S.
1990-11-01
RESUMEN. Se revisan resultados analiticos relativos a soluciones regulares del problema asteroidal eliptico promediados en la vecindad de una resonancia con jupiten Mencionamos Ia ley de estructura para libradores de alta excentricidad, la estabilidad de los centros de liberaci6n, las perturbaciones forzadas por la excentricidad de jupiter y las 6rbitas de corotaci6n. ABSTRAC This paper reviews analytical results concerning the regular solutions of the elliptic asteroidal problem averaged in the neighbourhood of a resonance with jupiter. We mention the law of structure for high-eccentricity librators, the stability of the libration centers, the perturbations forced by the eccentricity ofjupiter and the corotation orbits. Key words: ASThROIDS
Energy functions for regularization algorithms
Delingette, H.; Hebert, M.; Ikeuchi, K.
1991-01-01
Regularization techniques are widely used for inverse problem solving in computer vision such as surface reconstruction, edge detection, or optical flow estimation. Energy functions used for regularization algorithms measure how smooth a curve or surface is, and to render acceptable solutions these energies must verify certain properties such as invariance with Euclidean transformations or invariance with parameterization. The notion of smoothness energy is extended here to the notion of a differential stabilizer, and it is shown that to void the systematic underestimation of undercurvature for planar curve fitting, it is necessary that circles be the curves of maximum smoothness. A set of stabilizers is proposed that meet this condition as well as invariance with rotation and parameterization.
Physical model of dimensional regularization
Schonfeld, Jonathan F.
2016-12-15
We explicitly construct fractals of dimension 4-ε on which dimensional regularization approximates scalar-field-only quantum-field theory amplitudes. The construction does not require fractals to be Lorentz-invariant in any sense, and we argue that there probably is no Lorentz-invariant fractal of dimension greater than 2. We derive dimensional regularization's power-law screening first for fractals obtained by removing voids from 3-dimensional Euclidean space. The derivation applies techniques from elementary dielectric theory. Surprisingly, fractal geometry by itself does not guarantee the appropriate power-law behavior; boundary conditions at fractal voids also play an important role. We then extend the derivation to 4-dimensional Minkowski space. We comment on generalization to non-scalar fields, and speculate about implications for quantum gravity. (orig.)
Maximum mutual information regularized classification
Wang, Jim Jing-Yan
2014-09-07
In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.
Shuttle Upgrade Program: Tile TPS
Leiser, Daniel B.; Stewart, David A.; DiFiore, Robert; Irby, Ed; Arnold, James (Technical Monitor)
2001-01-01
One of the areas where the thermal protection system on the Space Shuttle Orbiter could be improved is the RSI (Reusable Surface Insulation) tile. The improvement would be in damage resistance that would reduce the resultant maintenance and inspection required. It has performed very well in every other aspect. Improving the system's damage resistance has been the subject of much research over the past several years. One of the results of that research was a new system developed for damage prone areas on the orbiter (i.e., base heat shield). That system, designated as TUFI, Toughened Uni-Piece Fibrous Insulation, was successfully demonstrated as an experiment on the Orbiter and is now baselined for the base heat shield. This paper describes the results of a current research program to further improve the TUFI tile system, thus making it applicable to more areas on the orbiter. The way to remove the current limitations of the TUFI system (i.e., weight or thermal conductivity differences between it and the baseline tile (LI-900)) is to improve the characteristics of LI-900 or AETB-8. Specifically this paper describes the results of two efforts. The first shows performance data of an improved LI-900 system involving the application of TUFI and the second describes data that shows a reduced difference in thermal conductivity between the advanced TUFI substrate (AETB-8) now used on the orbiter and LI-900.
Central charges in regular mechanics
Cabo-Montes de Oca, Alejandro; Villanueva, V M
1997-01-01
We consider the algebra associated to a group of transformations which are symmetries of a regular mechanical system (i.e. system free of constraints). For time dependent coordinate transformations we show that a central extension may appear at the classical level which is coordinate and momentum independent. A cochain formalism naturally arises in the argument and extends the usual configuration space cochain concepts to phase space.
Fast regularized image interpolation method
Hongchen Liu; Yong Feng; Linjing Li
2007-01-01
The regularized image interpolation method is widely used based on the vector interpolation model in which down-sampling matrix has very large dimension and needs large storage consumption and higher computation complexity. In this paper, a fast algorithm for image interpolation based on the tensor product of matrices is presented, which transforms the vector interpolation model to matrix form. The proposed algorithm can extremely reduce the storage requirement and time consumption. The simulation results verify their validity.
Efficient Hyperelastic Regularization for Registration
Darkner, Sune; Hansen, Michael S; Larsen, Rasmus;
2011-01-01
For most image registration problems a smooth one-to-one mapping is desirable, a diffeomorphism. This can be obtained using priors such as volume preservation, certain kinds of elasticity or both. The key principle is to regularize the strain of the deformation which can be done through penalizat......For most image registration problems a smooth one-to-one mapping is desirable, a diffeomorphism. This can be obtained using priors such as volume preservation, certain kinds of elasticity or both. The key principle is to regularize the strain of the deformation which can be done through...... penalization of the eigen values of the stress tensor. We present a computational framework for regularization of image registration for isotropic hyper elasticity. We formulate an efficient and parallel scheme for computing the principal stain based for a given parameterization by decomposing the left Cauchy...... elastic priors such at the Saint Vernant Kirchoff model, the Ogden material model or Riemanian elasticity. We exemplify the approach through synthetic registration and special tests as well as registration of different modalities; 2D cardiac MRI and 3D surfaces of the human ear. The artificial examples...
From Dimensional to Cut-Off Regularization
Dillig, M
2006-01-01
We extent the standard approach of dimensional regularization of Feynman diagrams: we replace the transition to lower dimensions by a 'natural' cut-off regulator. Introducing an external regulator of mass Lambda^(2e), we regain in the limit e -> 0 and e > 0 the results of dimensional and cut-off regularization, respectively. We demonstrate the versatility and adequacy of the different regularization schemes for practical examples (such as non covariant regularization, the axial anomaly or regularization in effective field theories).
The space shuttle program technologies and accomplishments
Sivolella, Davide
2017-01-01
This book tells the story of the Space Shuttle in its many different roles as orbital launch platform, orbital workshop, and science and technology laboratory. It focuses on the technology designed and developed to support the missions of the Space Shuttle program. Each mission is examined, from both the technical and managerial viewpoints. Although outwardly identical, the capabilities of the orbiters in the late years of the program were quite different from those in 1981. Sivolella traces the various improvements and modifications made to the shuttle over the years as part of each mission story. Technically accurate but with a pleasing narrative style and simple explanations of complex engineering concepts, the book provides details of many lesser known concepts, some developed but never flown, and commemorates the ingenuity of NASA and its partners in making each Space Shuttle mission push the boundaries of what we can accomplish in space. Using press kits, original papers, newspaper and magazine articles...
Nucleocytoplasmic Shuttling of Influenza A Virus Proteins
Jing Li
2015-05-01
Full Text Available Influenza viruses transcribe and replicate their genomes in the nuclei of infected host cells. The viral ribonucleoprotein (vRNP complex of influenza virus is the essential genetic unit of the virus. The viral proteins play important roles in multiple processes, including virus structural maintenance, mediating nucleocytoplasmic shuttling of the vRNP complex, virus particle assembly, and budding. Nucleocytoplasmic shuttling of viral proteins occurs throughout the entire virus life cycle. This review mainly focuses on matrix protein (M1, nucleoprotein (NP, nonstructural protein (NS1, and nuclear export protein (NEP, summarizing the mechanisms of their nucleocytoplasmic shuttling and the regulation of virus replication through their phosphorylation to further understand the regulation of nucleocytoplasmic shuttling in host adaptation of the viruses.
Space Shuttle Program Tin Whisker Mitigation
Nishimi, Keith
2007-01-01
The discovery of tin whiskers (TW) on space shuttle hardware led to a program to investigate and removal and mitigation of the source of the tin whiskers. A Flight Control System (FCS) avionics box failed during vehicle testing, and was routed to the NASA Shuttle Logistics Depot for testing and disassembly. The internal inspection of the box revealed TW growth visible without magnification. The results of the Tiger Team that was assembled to investigate and develop recommendations are reviewed in this viewgraph presentation.
Designing the Space Shuttle Propulsion System
Owen, James; Moore, Dennis; Wood, David; VanHooser, Kathrine; Wlzyn, Ken
2011-01-01
The major elements of the Space Shuttle Main Propulsion System include two reusable solid rocket motors integrated into recoverable solid rocket boosters, an expendable external fuel and oxidizer tank, and three reusable Space Shuttle Main Engines. Both the solid rocket motors and space shuttle main engines ignite prior to liftoff, with the solid rocket boosters separating about two minutes into flight. The external tank separates after main engine shutdown and is safely expended in the ocean. The SSME's, integrated into the Space Shuttle Orbiter aft structure, are reused after post landing inspections. Both the solid rocket motors and the space shuttle main engine throttle during early ascent flight to limit aerodynamic loads on the structure. The configuration is called a stage and a half as all the propulsion elements are active during the boost phase, and the SSME's continue operation to achieve orbital velocity approximately eight and a half minutes after liftoff. Design and performance challenges were numerous, beginning with development work in the 1970 s. The solid rocket motors were large, and this technology had never been used for human space flight. The SSME s were both reusable and very high performance staged combustion cycle engines, also unique to the Space Shuttle. The multi body side mount configuration was unique and posed numerous integration and interface challenges across the elements. Operation of the system was complex and time consuming. This paper discusses a number of the system level technical challenges including development and operations.
Pillhofer, Melanie; Spangler, Gottfried; Bovenschen, Ina; Kuenster, Anne K; Gabler, Sandra; Fallon, Barbara; Fegert, Joerg M; Ziegenhain, Ute
2015-04-01
This pilot study examined the effectiveness of a short-term attachment-based intervention, the Ulm Model, in a German population at risk for child abuse and neglect. The intervention used home visits and video feedback to promote maternal sensitivity, and was implemented by trained staff within the health care and youth welfare systems. Mothers in the control group (n=33) received standard services only, while those in the intervention group (n=63) additionally the Ulm Model intervention. The outcomes measured were maternal sensitivity, as assessed by the CARE-Index at pre-intervention, after the last session, and at about 6 and 12 months of age; and infant socio-emotional development, as assessed by the ET6-6 development test at about 6 and 12 months of age. The moderating effects on treatment outcomes of two variables were examined: risk for child abuse (moderate vs. high) and type of maternal attachment representation (secure vs. insecure). Among participants at moderate risk for child abuse, no differences were found between the intervention group and control group in either maternal sensitivity or infant development. Among those considered high risk, mothers in the intervention group showed a significant increase in maternal sensitivity from pre- to post-intervention; however, no group differences were seen at follow-up. There were some indications that infants of mothers in the intervention group showed better emotional development. The variable of maternal attachment representation was not a significant moderator for the intervention effect, but post hoc analysis indicated that the mean sensitivity of secure mothers was significant higher at the 6-month follow-up. Copyright © 2014 Elsevier Ltd. All rights reserved.
Regularized degenerate multi-solitons
Correa, Francisco
2016-01-01
We report complex PT-symmetric multi-soliton solutions to the Korteweg de-Vries equation that asymptotically contain one-soliton solutions, with each of them possessing the same amount of finite real energy. We demonstrate how these solutions originate from degenerate energy solutions of the Schroedinger equation. Technically this is achieved by the application of Darboux-Crum transformations involving Jordan states with suitable regularizing shifts. Alternatively they may be constructed from a limiting process within the context Hirota's direct method or on a nonlinear superposition obtained from multiple Baecklund transformations. The proposed procedure is completely generic and also applicable to other types of nonlinear integrable systems.
Academic Training Lecture - Regular Programme
PH Department
2011-01-01
Regular Lecture Programme 9 May 2011 ACT Lectures on Detectors - Inner Tracking Detectors by Pippa Wells (CERN) 10 May 2011 ACT Lectures on Detectors - Calorimeters (2/5) by Philippe Bloch (CERN) 11 May 2011 ACT Lectures on Detectors - Muon systems (3/5) by Kerstin Hoepfner (RWTH Aachen) 12 May 2011 ACT Lectures on Detectors - Particle Identification and Forward Detectors by Peter Krizan (University of Ljubljana and J. Stefan Institute, Ljubljana, Slovenia) 13 May 2011 ACT Lectures on Detectors - Trigger and Data Acquisition (5/5) by Dr. Brian Petersen (CERN) from 11:00 to 12:00 at CERN ( Bldg. 222-R-001 - Filtration Plant )
Regularization methods in Banach spaces
Schuster, Thomas; Hofmann, Bernd; Kazimierski, Kamil S
2012-01-01
Regularization methods aimed at finding stable approximate solutions are a necessary tool to tackle inverse and ill-posed problems. Usually the mathematical model of an inverse problem consists of an operator equation of the first kind and often the associated forward operator acts between Hilbert spaces. However, for numerous problems the reasons for using a Hilbert space setting seem to be based rather on conventions than on an approprimate and realistic model choice, so often a Banach space setting would be closer to reality. Furthermore, sparsity constraints using general Lp-norms or the B
Robust integral stabilization of regular linear systems
XU Chengzheng; FENG Dexing
2004-01-01
We consider regular systems with control and observation. We prove some necessary and sufficient condition for an exponentially stable regular system to admit an integral stabilizing controller. We propose also some robust integral controllers when they exist.
Generalization performance of regularized neural network models
Larsen, Jan; Hansen, Lars Kai
1994-01-01
Architecture optimization is a fundamental problem of neural network modeling. The optimal architecture is defined as the one which minimizes the generalization error. This paper addresses estimation of the generalization performance of regularized, complete neural network models. Regularization...
STS-31 Space Shuttle mission report
Camp, David W.; Germany, D. M.; Nicholson, Leonard S.
1990-01-01
The STS-31 Space Shuttle Program Mission Report contains a summary of the vehicle subsystem activities on this thirty-fifth flight of the Space Shuttle and the tenth flight of the Orbiter Vehicle Discovery (OV-103). In addition to the Discovery vehicle, the flight vehicle consisted of an External Tank (ET) (designated as ET-34/LWT-27), three Space Shuttle main engines (SSME's) (serial numbers 2011, 2031, and 2107), and two Solid Rocket Booster (SRB) (designated as BI-037). The primary objective of the mission was to place the Hubble Space Telescope (HST) into a 330 nmi. circular orbit having an inclination of 28.45 degrees. The secondary objectives were to perform all operations necessary to support the requirements of the Protein Crystal Growth (PCG), Investigations into Polymer Membrane Processing (IPMP), Radiation Monitoring Equipment (RME), Ascent Particle Monitor (APM), IMAX Cargo Bay Camera (ICBC), Air Force Maui Optical Site Calibration Test (AMOS), IMAX Crew Compartment Camera, and Ion Arc payloads. In addition, 12 development test objectives (DTO's) and 10 detailed supplementary objectives (DSO's) were assigned to the flight. The sequence of events for this mission is shown. The significant problems that occurred in the Space Shuttle Orbiter subsystems during the mission are summarized, and the official problem tracking list is presented. In addition, each of the Space Shuttle Orbiter problems is cited in the subsystem discussion.
Shuttle Propulsion Overview - The Design Challenges
Owen, James W.
2011-01-01
The major elements of the Space Shuttle Main Propulsion System include two reusable solid rocket motors integrated into recoverable solid rocket boosters, an expendable external fuel and oxidizer tank, and three reusable Space Shuttle Main Engines. Both the solid rocket motors and space shuttle main engines ignite prior to liftoff, with the solid rocket boosters separating about two minutes into flight. The external tank separates, about eight and a half minutes into the flight, after main engine shutdown and is safely expended in the ocean. The SSME's, integrated into the Space Shuttle Orbiter aft structure, are reused after post landing inspections. The configuration is called a stage and a half as all the propulsion elements are active during the boost phase, with only the SSME s continuing operation to achieve orbital velocity. Design and performance challenges were numerous, beginning with development work in the 1970's. The solid rocket motors were large, and this technology had never been used for human space flight. The SSME s were both reusable and very high performance staged combustion cycle engines, also unique to the Space Shuttle. The multi body side mount configuration was unique and posed numerous integration and interface challenges across the elements. Operation of the system was complex and time consuming. This paper describes the design challenges and key areas where the design evolved during the program.
A FAST CONVERGENT METHOD OF ITERATED REGULARIZATION
Huang Xiaowei; Wu Chuansheng; Wu Di
2009-01-01
This article presents a fast convergent method of iterated regularization based on the idea of Landweber iterated regularization, and a method for a-posteriori choice by the Morozov discrepancy principle and the optimum asymptotic convergence order of the regularized solution is obtained. Numerical test shows that the method of iterated regu-larization can quicken the convergence speed and reduce the calculation burden efficiently.
Weakly and Strongly Regular Near-rings
N.Argac; N.J.Groenewald
2005-01-01
In this paper, we prove some basic properties of left weakly regular near-rings.We give an affirmative answer to the question whether a left weakly regular near-ring with left unity and satisfying the IFP is also right weakly regular. In the last section, we use among others left 0-prime and left completely prime ideals to characterize strongly regular near-rings.
MAXIMAL POINTS OF A REGULAR TRUTH FUNCTION
Every canonical linearly separable truth function is a regular function, but not every regular truth function is linearly separable. The most...promising method of determining which of the regular truth functions are linearly separable r quires finding their maximal and minimal points. In this...report is developed a quick, systematic method of finding the maximal points of any regular truth function in terms of its arithmetic invariants. (Author)
22 CFR 19.11-2 - Regular survivor annuity for a former spouse.
2010-04-01
... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Regular survivor annuity for a former spouse... survivor annuity for a former spouse. (a) Divorce prior to retirement. If a participant or former... share of such a principal's maximum regular survivor annuity (based on service performed prior to...
Natural frequency of regular basins
Tjandra, Sugih S.; Pudjaprasetya, S. R.
2014-03-01
Similar to the vibration of a guitar string or an elastic membrane, water waves in an enclosed basin undergo standing oscillatory waves, also known as seiches. The resonant (eigen) periods of seiches are determined by water depth and geometry of the basin. For regular basins, explicit formulas are available. Resonance occurs when the dominant frequency of external force matches the eigen frequency of the basin. In this paper, we implement the conservative finite volume scheme to 2D shallow water equation to simulate resonance in closed basins. Further, we would like to use this scheme and utilizing energy spectra of the recorded signal to extract resonant periods of arbitrary basins. But here we first test the procedure for getting resonant periods of a square closed basin. The numerical resonant periods that we obtain are comparable with those from analytical formulas.
Regularized degenerate multi-solitons
Correa, Francisco; Fring, Andreas
2016-09-01
We report complex {P}{T} -symmetric multi-soliton solutions to the Korteweg de-Vries equation that asymptotically contain one-soliton solutions, with each of them possessing the same amount of finite real energy. We demonstrate how these solutions originate from degenerate energy solutions of the Schrödinger equation. Technically this is achieved by the application of Darboux-Crum transformations involving Jordan states with suitable regularizing shifts. Alternatively they may be constructed from a limiting process within the context Hirota's direct method or on a nonlinear superposition obtained from multiple Bäcklund transformations. The proposed procedure is completely generic and also applicable to other types of nonlinear integrable systems.
Modeling polycrystals with regular polyhedra
Paulo Rangel Rios
2006-06-01
Full Text Available Polycrystalline structure is of paramount importance to materials science and engineering. It provides an important example of a space-filling irregular network structure that also occurs in foams as well as in certain biological tissues. Therefore, seeking an accurate description of the characteristics of polycrystals is of fundamental importance. Recently, one of the authors (MEG published a paper in which a method was devised of representation of irregular networks by regular polyhedra with curved faces. In Glicksman's method a whole class of irregular polyhedra with a given number of faces, N, is represented by a single symmetrical polyhedron with N curved faces. This paper briefly describes the topological and metric properties of these special polyhedra. They are then applied to two important problems of irregular networks: the dimensionless energy 'cost' of irregular networks, and the derivation of a 3D analogue of the von Neumann-Mullins equation for the growth rate of grains in a polycrystal.
REGULARITY FOR CERTAIN QUASILINEARELLIPTIC SYSTEMS OF DIVERGENCESTRUCTURE
周树清; 冉启康
2001-01-01
The regularity of the gradient of H lder continuous solutions of quasi-linear elliptic systems of the form -Dj(aij(x, u, Du)Diuk) = -Difik + gkis investigated. Partial regularity and ε-regularity are shown to hold under the structural assumption-Dj(aij(x,u, Du)) = hi ∈ L∞.
Technology Corner: A Regular Expression Training App
Nick Flor
2012-12-01
Full Text Available Regular expressions enable digital forensic analysts to find information in files. The best way for an analyst to become proficient in writing regular expressions is to practice. This paper presents the code for an app that allows an analyst to practice writing regular expressions.
Counting Rooted Nearly 2-regular Planar Maps
郝荣霞; 蔡俊亮
2004-01-01
The number of rooted nearly 2-regular maps with the valency of rootvertex, the number of non-rooted vertices and the valency of root-face as three parameters is obtained. Furthermore, the explicit expressions of the special cases including loopless nearly 2-regular maps and simple nearly 2-regular maps in terms of the above three parameters are derived.
On the Construction of Regular Orthocryptogroups
Xiang Zhi KONG
2002-01-01
The aim of this paper is to study regular orthocryptogroups. After obtaining some charac-terizations of such semigroups, we establish the construction theorem of regular orthocryptogroups. Asan application, we give the construction theorem of right quasi-normal orthocryptogroups and studyhomomorphisms between two regular orthocryptogroups.
REGULAR RELATIONS AND MONOTONE NORMAL ORDERED SPACES
XU XIAOQUAN; LIU YINGMING
2004-01-01
In this paper the classical theorem of Zareckii about regular relations is generalized and an intrinsic characterization of regularity is obtained. Based on the generalized Zareckii theorem and the intrinsic characterization of regularity, the authors give a characterization of monotone normality of ordered spaces. A new proof of the UrysohnNachbin lemma is presented which is quite different from the classical one.
Regular Pentagons and the Fibonacci Sequence.
French, Doug
1989-01-01
Illustrates how to draw a regular pentagon. Shows the sequence of a succession of regular pentagons formed by extending the sides. Calculates the general formula of the Lucas and Fibonacci sequences. Presents a regular icosahedron as an example of the golden ratio. (YP)
Oswald, Fred B.; Savage, Michael; Zaretsky, Erwin V.
2015-01-01
The U.S. Space Shuttle fleet was originally intended to have a life of 100 flights for each vehicle, lasting over a 10-year period, with minimal scheduled maintenance or inspection. The first space shuttle flight was that of the Space Shuttle Columbia (OV-102), launched April 12, 1981. The disaster that destroyed Columbia occurred on its 28th flight, February 1, 2003, nearly 22 years after its first launch. In order to minimize risk of losing another Space Shuttle, a probabilistic life and reliability analysis was conducted for the Space Shuttle rudder/speed brake actuators to determine the number of flights the actuators could sustain. A life and reliability assessment of the actuator gears was performed in two stages: a contact stress fatigue model and a gear tooth bending fatigue model. For the contact stress analysis, the Lundberg-Palmgren bearing life theory was expanded to include gear-surface pitting for the actuator as a system. The mission spectrum of the Space Shuttle rudder/speed brake actuator was combined into equivalent effective hinge moment loads including an actuator input preload for the contact stress fatigue and tooth bending fatigue models. Gear system reliabilities are reported for both models and their combination. Reliability of the actuator bearings was analyzed separately, based on data provided by the actuator manufacturer. As a result of the analysis, the reliability of one half of a single actuator was calculated to be 98.6 percent for 12 flights. Accordingly, each actuator was subsequently limited to 12 flights before removal from service in the Space Shuttle.
Shuttle Case Study Collection Website Development
Ransom, Khadijah S.; Johnson, Grace K.
2012-01-01
As a continuation from summer 2012, the Shuttle Case Study Collection has been developed using lessons learned documented by NASA engineers, analysts, and contractors. Decades of information related to processing and launching the Space Shuttle is gathered into a single database to provide educators with an alternative means to teach real-world engineering processes. The goal is to provide additional engineering materials that enhance critical thinking, decision making, and problem solving skills. During this second phase of the project, the Shuttle Case Study Collection website was developed. Extensive HTML coding to link downloadable documents, videos, and images was required, as was training to learn NASA's Content Management System (CMS) for website design. As the final stage of the collection development, the website is designed to allow for distribution of information to the public as well as for case study report submissions from other educators online.
STS-62 Space Shuttle mission report
Fricke, Robert W., Jr.
1994-05-01
The STS-62 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSHE) systems performance during the sixty-first flight of the Space Shuttle Program and sixteenth flight of the Orbiter vehicle Columbia (OV-102). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-62; three SSME's which were designated as serial numbers 2031, 2109, and 2029 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-064. The RSRM's that were installed in each SRB were designated as 360L036A (lightweight) for the left SRB, and 36OWO36B (welterweight) for the right SRB. This STS-62 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objectives of the STS-62 mission were to perform the operations of the United States Microgravity Payload-2 (USMP-2) and the Office of Aeronautics and Space Technology-2 (OAST-2) payload. The secondary objectives of this flight were to perform the operations of the Dexterous End Effector (DEE), the Shuttle Solar Backscatter Ultraviolet/A (SSBUV/A), the Limited Duration Space Environment Candidate Material Exposure (LDCE), the Advanced Protein Crystal Growth (APCG), the Physiological Systems Experiments (PSE), the Commercial Protein Crystal Growth (CPCG), the Commercial Generic Bioprocessing Apparatus (CGBA), the Middeck Zero-Gravity Dynamics Experiment (MODE), the Bioreactor Demonstration System (BDS), the Air Force Maui Optical Site Calibration Test (AMOS), and the Auroral Photography Experiment (APE-B).
An Analysis of Shuttle Crew Scheduling Violations
Bristol, Douglas
2012-01-01
From the early years of the Space Shuttle program, National Aeronautics and Space Administration (NASA) Shuttle crews have had a timeline of activities to guide them through their time on-orbit. Planners used scheduling constraints to build timelines that ensured the health and safety of the crews. If a constraint could not be met it resulted in a violation. Other agencies of the federal government also have scheduling constraints to ensure the safety of personnel and the public. This project examined the history of Space Shuttle scheduling constraints, constraints from Federal agencies and branches of the military and how these constraints may be used as a guide for future NASA and private spacecraft. This was conducted by reviewing rules and violations with regard to human aerospace scheduling constraints, environmental, political, social and technological factors, operating environment and relevant human factors. This study includes a statistical analysis of Shuttle Extra Vehicular Activity (EVA) related violations to determine if these were a significant producer of constraint violations. It was hypothesized that the number of SCSC violations caused by EVA activities were a significant contributor to the total number of violations for Shuttle/ISS missions. Data was taken from NASA data archives at the Johnson Space Center from Space Shuttle/ISS missions prior to the STS-107 accident. The results of the analysis rejected the null hypothesis and found that EVA violations were a significant contributor to the total number of violations. This analysis could help NASA and commercial space companies understand the main source of constraint violations and allow them to create constraint rules that ensure the safe operation of future human private and exploration missions. Additional studies could be performed to evaluate other variables that could have influenced the scheduling violations that were analyzed.
Effect of regularization parameters on geophysical reconstruction
Zhou Hui; Wang Zhaolei; Qiu Dongling; Li Guofa; Shen Jinsong
2009-01-01
In this paper we discuss the edge-preserving regularization method in the reconstruction of physical parameters from geophysical data such as seismic and ground-penetrating radar data.In the regularization method a potential function of model parameters and its corresponding functions are introduced.This method is stable and able to preserve boundaries, and protect resolution.The effect of regularization depends to a great extent on the suitable choice of regularization parameters.The influence of the edge-preserving parameters on the reconstruction results is investigated and the relationship between the regularization parameters and the error of data is described.
STS-129 shuttle crew visits Stennis
2010-01-01
Members of the STS-129 space shuttle crew visited NASA's John C. Stennis Space Center on Jan. 19 to share details of their November visit to the International Space Station. During their 11-day mission aboard shuttle Atlantis, crew members delivered equipment, supplies and spare parts to the ISS. Following their mission report, astronauts visited with Stennis employees during a brief reception. Astronauts visiting Stennis were Pilot Barry Wilmore, Mission Specialist Randy Bresnik, Commander Charles Hobaugh and Mission Specialists Mike Foreman and Robert Satcher.
Post-Shuttle EVA Operations on ISS
West, William; Witt, Vincent; Chullen, Cinda
2010-01-01
The expected retirement of the NASA Space Transportation System (also known as the Space Shuttle ) by 2011 will pose a significant challenge to Extra-Vehicular Activities (EVA) on-board the International Space Station (ISS). The EVA hardware currently used to assemble and maintain the ISS was designed assuming that it would be returned to Earth on the Space Shuttle for refurbishment, or if necessary for failure investigation. With the retirement of the Space Shuttle, a new concept of operations was developed to enable EVA hardware (Extra-vehicular Mobility Unit (EMU), Airlock Systems, EVA tools, and associated support hardware and consumables) to perform ISS EVAs until 2015, and possibly beyond to 2020. Shortly after the decision to retire the Space Shuttle was announced, the EVA 2010 Project was jointly initiated by NASA and the One EVA contractor team. The challenges addressed were to extend the operating life and certification of EVA hardware, to secure the capability to launch EVA hardware safely on alternate launch vehicles, to protect for EMU hardware operability on-orbit, and to determine the source of high water purity to support recharge of PLSSs (no longer available via Shuttle). EVA 2010 Project includes the following tasks: the development of a launch fixture that would allow the EMU Portable Life Support System (PLSS) to be launched on-board alternate vehicles; extension of the EMU hardware maintenance interval from 3 years (current certification) to a minimum of 6 years (to extend to 2015); testing of recycled ISS Water Processor Assembly (WPA) water for use in the EMU cooling system in lieu of water resupplied by International Partner (IP) vehicles; development of techniques to remove & replace critical components in the PLSS on-orbit (not routine); extension of on-orbit certification of EVA tools; and development of an EVA hardware logistical plan to support the ISS without the Space Shuttle. Assumptions for the EVA 2010 Project included no more
Minimally invasive space shuttle laminotomy for degenerative lumbar spinal canal stenosis
Shunji Asamoto
2016-01-01
Full Text Available Study Design: Technical note. Objectives: To show microsurgical technique, considering the meticulous anatomy of the ligamentum flavum (LF. Background: Different methods are available for treating lumbar spinal canal stenosis (LSCS. A minimally invasive surgery, namely, space shuttle laminotomy, has recently been proposed. Here, we describe the surgical method for this novel technique. To conduct this surgery accurately, surgeons must have perfect knowledge of anatomy, especially regarding the LF. Materials and Methods and Results: We use this interlaminectomy technique for all cases of LSCS. All patients with LSCS recovered from their neurological deficits in shorter hoslital stays than regular laminectomy. Conclusion: Minimally invasive space shuttle laminotomy (MISSL, which involves a microsurgical technique, is a safe, complication-free procedure.
Griffin Lifts Off at NASA With Calls for Speeding Shuttle Replacement, Reopening Hubble Decision
Morring, Frank, Jr.
2005-01-01
Michael D. Griffin launched his tenure as NASA's 11th administrator on a fast track, using his "emergency" confiimation by the U.S. Senate to plug himself into space shuttle return-to-flight decision-making and urging faster development of the shuttle replacement. He also deftly sidestepped the treacherous issue of letting the aging Hubble Space Telescope die that was left behind by former Administrator Sean O'Keefe. Griffin told the Senate Commerce, Science and Transportation Committee that he would take another look at a shuttle mission to service the telescope, but not until the redesigned shuttle system makes a couple of test flights. Griffin made clear at his confirmation hearing Apr. 12 that he has long supported the ideas embodied in President Bush s push to move human exploration out of low Earth orbit, while finishing the International Space Station and retiring the space shuttle as soon as possible. And he showed right out of the blocks that his technical training and management background should serve him well in implementing Bush's directives.
Westrup, R. W.
1972-01-01
Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.
Regular Black Holes with Cosmological Constant
MO Wen-Juan; CAI Rong-Gen; SU Ru-Keng
2006-01-01
We present a class of regular black holes with cosmological constant Λ in nonlinear electrodynamics. Instead of usual singularity behind black hole horizon, all fields and curvature invariants are regular everywhere for the regular black holes. Through gauge invariant approach, the linearly dynamical stability of the regular black hole is studied. In odd-parity sector, we find that the Λ term does not appear in the master equations of perturbations, which shows that the regular black hole is stable under odd-parity perturbations. On the other hand, for the even-parity sector, the master equations are more complicated than the case without the cosmological constant. We obtain the sufficient conditions for stability of the regular black hole. We also investigate the thermodynamic properties of the regular black hole, and find that those thermodynamic quantities do not satisfy the differential form of first law of black hole thermodynamics. The reason for violating the first law is revealed.
78 FR 58516 - Information Collection; Direct Loan Servicing-Regular
2013-09-24
... provide loans to family farmers to purchase real estate and equipment, and finance agricultural production... borrowers and provide credit counseling, management advice and financial guidance. Additionally, FSA must document that credit is not available to the borrower from commercial credit sources in order to...
Learning regularized LDA by clustering.
Pang, Yanwei; Wang, Shuang; Yuan, Yuan
2014-12-01
As a supervised dimensionality reduction technique, linear discriminant analysis has a serious overfitting problem when the number of training samples per class is small. The main reason is that the between- and within-class scatter matrices computed from the limited number of training samples deviate greatly from the underlying ones. To overcome the problem without increasing the number of training samples, we propose making use of the structure of the given training data to regularize the between- and within-class scatter matrices by between- and within-cluster scatter matrices, respectively, and simultaneously. The within- and between-cluster matrices are computed from unsupervised clustered data. The within-cluster scatter matrix contributes to encoding the possible variations in intraclasses and the between-cluster scatter matrix is useful for separating extra classes. The contributions are inversely proportional to the number of training samples per class. The advantages of the proposed method become more remarkable as the number of training samples per class decreases. Experimental results on the AR and Feret face databases demonstrate the effectiveness of the proposed method.
STS-41 Space Shuttle mission report
Camp, David W.; Germany, D. M.; Nicholson, Leonard S.
1990-01-01
The STS-41 Space Shuttle Program Mission Report contains a summary of the vehicle subsystem activities on this thirty-sixth flight of the Space Shuttle and the eleventh flight of the Orbiter vehicle, Discovery (OV-103). In addition to the Discovery vehicle, the flight vehicle consisted of an External Tank (ET) (designated as ET-39/LWT-32), three Space Shuttle main engines (SSME's) (serial numbers 2011, 2031, and 2107), and two Solid Rocket Boosters (SRB's), designated as BI-040. The primary objective of the STS-41 mission was to successfully deploy the Ulysses/inertial upper stage (IUS)/payload assist module (PAM-S) spacecraft. The secondary objectives were to perform all operations necessary to support the requirements of the Shuttle Backscatter Ultraviolet (SSBUV) Spectrometer, Solid Surface Combustion Experiment (SSCE), Space Life Sciences Training Program Chromosome and Plant Cell Division in Space (CHROMEX), Voice Command System (VCS), Physiological Systems Experiment (PSE), Radiation Monitoring Experiment - 3 (RME-3), Investigations into Polymer Membrane Processing (IPMP), Air Force Maui Optical Calibration Test (AMOS), and Intelsat Solar Array Coupon (ISAC) payloads. The sequence of events for this mission is shown in tabular form. Summarized are the significant problems that occurred in the Orbiter subsystems during the mission. The official problem tracking list is presented. In addition, each Orbiter problem is cited in the subsystem discussion.
STS-52 Space Shuttle mission report
Fricke, Robert W., Jr.
1992-12-01
The STS-52 Space Shuttle Program Mission Report provides a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle main engine (SSME) subsystem performance during the fifty-first flight of the Space Shuttle Program, and the thirteenth flight of the Orbiter vehicle Columbia (OV-102). In addition to the Orbiter, the flight vehicle consisted of the following: an ET (designated as ET-55/LWT-48); three SSME's, which were serial numbers 2030, 2015, and 2034 in positions 1, 2, and 3, respectively; and two SRB's, which were designated BI-054. The lightweight RSRM's that were installed in each SRB were designated 360L027A for the left SRB and 360Q027B for the right SRB. The primary objectives of this flight were to successfully deploy the Laser Geodynamic Satellite (LAGEOS-2) and to perform operations of the United States Microgravity Payload-1 (USMP-1). The secondary objectives of this flight were to perform the operations of the Attitude Sensor Package (ASP), the Canadian Experiments-2 (CANEX-2), the Crystals by Vapor Transport Experiment (CVTE), the Heat Pipe Performance Experiment (HPP), the Commercial Materials Dispersion Apparatus Instrumentation Technology Associates Experiments (CMIX), the Physiological System Experiment (PSE), the Commercial Protein Crystal Growth (CPCG-Block 2), the Shuttle Plume Impingement Experiment (SPIE), and the Tank Pressure Control Experiment (TPCE) payloads.
Shuttle Imaging Radar Survey Mission C
U.S. Geological Survey, Department of the Interior — Abstract: Spaceborne Imaging Radar-C (SIR-C) was part of an imaging radar system that was flown on board two Space Shuttle flights (9 - 20 April, 1994 and 30...
Rockwell Fails in Response to Shuttle Disaster.
Kaufman, John A.
1988-01-01
Describes the contingent media relations policy employed by Rockwell International, the prime contractor for the United States space shuttle program, following the January 28, 1986, destruction of the Challenger. Analyzes Rockwell's response through a theoretical model of crisis perception and Rockwell's policy in relation to the mass media. (MS)
Reliability of a Shuttle reaction timer
Hays, Russell D.; Mazzocca, Augustus D.; Rashid, Michael; Siconolfi, Steven F.
1992-01-01
Reaction, movement, and task times refer to the times needed to initially respond to a stimulus, make the specific movement, and complete the entire task. This study evaluated the reliability of a simple reaction timer designed to mimic a Space Shuttle task (turning on an overhead switch).
Shuttle Transportation System Case-Study Development
Ransom, Khadijah
2012-01-01
A case-study collection was developed for NASA's Space Shuttle Program. Using lessons learned and documented by NASA KSC engineers, analysts, and contractors, decades of information related to processing and launching the Space Shuttle was gathered into a single database. The goal was to provide educators with an alternative means to teach real-world engineering processes and to enhance critical thinking, decision making, and problem solving skills. Suggested formats were created to assist both external educators and internal NASA employees to develop and contribute their own case-study reports to share with other educators and students. Via group project, class discussion, or open-ended research format, students will be introduced to the unique decision making process related to Shuttle missions and development. Teaching notes, images, and related documents will be made accessible to the public for presentation of Space Shuttle reports. Lessons investigated included the engine cutoff (ECO) sensor anomaly which occurred during mission STS-114. Students will be presented with general mission infom1ation as well as an explanation of ECO sensors. The project will conclude with the design of a website that allows for distribution of information to the public as well as case-study report submissions from other educators online.
Shuttle Imaging Radar Survey Mission C
U.S. Geological Survey, Department of the Interior — Spaceborne Imaging Radar-C (SIR-C) was part of an imaging radar system that was flown on board two Space Shuttle flights (9 - 20 April, 1994 and 30 September - 11...
AMS gets lift on space shuttle Discovery
2009-01-01
AMS-02, the CERN-recognized experiment that will seek dark matter, missing matter and antimatter in Space aboard the International Space Station (ISS), has recently got the green light to be part of the STS-134 NASA mission in 2010. Installation of AMS detectors in the Prévessin experiment hall.In a recent press release, NASA announced that the last or last-but-one mission of the Space Shuttle programme would be the one that will deliver AMS, the Alpha Magnetic Spectrometer, to the International Space Station. The Space Shuttle Discovery is due to lift off in July 2010 from Kennedy Space Center and its mission will include the installation of AMS to the exterior of the space station, using both the shuttle and station arms. "It wasn’t easy to get a lift on the Space Shuttle from the Bush administration," says professor Samuel Ting, spokesperson of the experiment, "since during his administration all the funds for space research w...
Optimal Wafer Cutting in Shuttle Layout Problems
Nisted, Lasse; Pisinger, David; Altman, Avri
2011-01-01
A major cost in semiconductor manufacturing is the generation of photo masks which are used to produce the dies. When producing smaller series of chips it can be advantageous to build a shuttle mask (or multi-project wafer) to share the startup costs by placing different dies on the same mask...
Ideal regularization for learning kernels from labels.
Pan, Binbin; Lai, Jianhuang; Shen, Lixin
2014-08-01
In this paper, we propose a new form of regularization that is able to utilize the label information of a data set for learning kernels. The proposed regularization, referred to as ideal regularization, is a linear function of the kernel matrix to be learned. The ideal regularization allows us to develop efficient algorithms to exploit labels. Three applications of the ideal regularization are considered. Firstly, we use the ideal regularization to incorporate the labels into a standard kernel, making the resulting kernel more appropriate for learning tasks. Next, we employ the ideal regularization to learn a data-dependent kernel matrix from an initial kernel matrix (which contains prior similarity information, geometric structures, and labels of the data). Finally, we incorporate the ideal regularization to some state-of-the-art kernel learning problems. With this regularization, these learning problems can be formulated as simpler ones which permit more efficient solvers. Empirical results show that the ideal regularization exploits the labels effectively and efficiently.
Regularity extraction from non-adjacent sounds
Alexandra eBendixen
2012-05-01
Full Text Available The regular behavior of sound sources helps us to make sense of the auditory environment. Regular patterns may, for instance, convey information on the identity of a sound source (such as the acoustic signature of a train moving on the rails. Yet typically, this signature overlaps in time with signals emitted from other sound sources. It is generally assumed that auditory regularity extraction cannot operate upon this mixture of signals because it only finds regularities between adjacent sounds. In this view, the auditory environment would be grouped into separate entities by means of readily available acoustic cues such as separation in frequency and location. Regularity extraction processes would then operate upon the resulting groups. Our new experimental evidence challenges this view. We presented two interleaved sound sequences which overlapped in frequency range and shared all acoustic parameters. The sequences only differed in their underlying regular patterns. We inserted deviants into one of the sequences to probe whether the regularity was extracted. In the first experiment, we found that these deviants elicited the mismatch negativity (MMN component. Thus the auditory system was able to find the regularity between the non-adjacent sounds. Regularity extraction was not influenced by sequence cohesiveness as manipulated by the relative duration of tones and silent inter-tone-intervals. In the second experiment, we showed that a regularity connecting non-adjacent sounds was discovered only when the intervening sequence also contained a regular pattern, but not when the intervening sounds were randomly varying. This suggests that separate regular patterns are available to the auditory system as a cue for identifying signals coming from distinct sound sources. Thus auditory regularity extraction is not necessarily confined to a processing stage after initial sound grouping, but may precede grouping when other acoustic cues are unavailable.
Shuttle Repair Tools Automate Vehicle Maintenance
2013-01-01
Successfully building, flying, and maintaining the space shuttles was an immensely complex job that required a high level of detailed, precise engineering. After each shuttle landed, it entered a maintenance, repair, and overhaul (MRO) phase. Each system was thoroughly checked and tested, and worn or damaged parts replaced, before the shuttle was rolled out for its next mission. During the MRO period, workers needed to record exactly what needed replacing and why, as well as follow precise guidelines and procedures in making their repairs. That meant traceability, and with it lots of paperwork. In 2007, the number of reports generated during electrical system repairs was getting out of hand-placing among the top three systems in terms of paperwork volume. Repair specialists at Kennedy Space Center were unhappy spending so much time at a desk and so little time actually working on the shuttle. "Engineers weren't spending their time doing technical work," says Joseph Schuh, an electrical engineer at Kennedy. "Instead, they were busy with repetitive, time-consuming processes that, while important in their own right, provided a low return on time invested." The strain of such inefficiency was bad enough that slow electrical repairs jeopardized rollout on several occasions. Knowing there had to be a way to streamline operations, Kennedy asked Martin Belson, a project manager with 30 years experience as an aerospace contractor, to co-lead a team in developing software that would reduce the effort required to document shuttle repairs. The result was System Maintenance Automated Repair Tasks (SMART) software. SMART is a tool for aggregating and applying information on every aspect of repairs, from procedures and instructions to a vehicle s troubleshooting history. Drawing on that data, SMART largely automates the processes of generating repair instructions and post-repair paperwork. In the case of the space shuttle, this meant that SMART had 30 years worth of operations
Shuttle SBUV (SSBUV) Solar Spectral Irradiance V008
National Aeronautics and Space Administration — The Shuttle Solar Backscatter Ultraviolet (SSBUV) level-2 irradiance data are available for eight space shuttle missions flown between 1989 and 1996. SSBUV, a...
Macro Level Simulation Model Of Space Shuttle Processing
2000-01-01
The contents include: 1) Space Shuttle Processing Simulation Model; 2) Knowledge Acquisition; 3) Simulation Input Analysis; 4) Model Applications in Current Shuttle Environment; and 5) Model Applications for Future Reusable Launch Vehicles (RLV's). This paper is presented in viewgraph form.
Dosimetry Service
2005-01-01
Please remember to read your dosimeter at least once every month. A regular read-out is indispensable to ensure periodic monitoring of your personal dose. You must read your dosimeter even if you have not visited the controlled areas. Film badges are no longer valid at CERN and holders of film badges are no longer allowed to enter the controlled radiation areas or work with a source. Dosimetry Service Tel. 72155 http://cern.ch/rp-dosimetry
E-Service Quality in Higher Education and Frequency of Use of the Service
Kim-Soon, Ng; Rahman, Abd; Ahmed, Muhudin
2014-01-01
Universities have been at the forefront of online service provision. Regular evaluations and appraisals of its e-services provided to students are regularly improvised to keep pace with the rapid changes of learning technology and competitiveness of its services provided. There is a dread of research works investigating e-service quality…
New Regularization Method in Electrical Impedance Tomography
侯卫东; 莫玉龙
2002-01-01
Image reconstruction in elecrical impedance tomography(EIT)is a highly ill-posed inverse problem,Regularization techniques must be used in order to solve the problem,In this paper,a new regularization method based on the spatial filtering theory is proposed.The new regularized reconstruction for EIT is independent of the estimation of impedance distribution,so it can be implemented more easily than the maxiumum a posteriori(MAP) method.The regularization level in our proposed method varies spatially so as to be suited to the correlation character of the object's impedance distribution.We implemented our regularization method with two dimensional computer simulations.The experimental results indicate that the quality of the reconstructed impedance images with the descibed regularization method based on spatial filtering theory is better than that with Tikhonov method.
Regularized Laplacian Estimation and Fast Eigenvector Approximation
Perry, Patrick O
2011-01-01
Recently, Mahoney and Orecchia demonstrated that popular diffusion-based procedures to compute a quick \\emph{approximation} to the first nontrivial eigenvector of a data graph Laplacian \\emph{exactly} solve certain regularized Semi-Definite Programs (SDPs). In this paper, we extend that result by providing a statistical interpretation of their approximation procedure. Our interpretation will be analogous to the manner in which $\\ell_2$-regularized or $\\ell_1$-regularized $\\ell_2$-regression (often called Ridge regression and Lasso regression, respectively) can be interpreted in terms of a Gaussian prior or a Laplace prior, respectively, on the coefficient vector of the regression problem. Our framework will imply that the solutions to the Mahoney-Orecchia regularized SDP can be interpreted as regularized estimates of the pseudoinverse of the graph Laplacian. Conversely, it will imply that the solution to this regularized estimation problem can be computed very quickly by running, e.g., the fast diffusion-base...
Total variation regularization with bounded linear variations
Makovetskii, Artyom; Voronin, Sergei; Kober, Vitaly
2016-09-01
One of the most known techniques for signal denoising is based on total variation regularization (TV regularization). A better understanding of TV regularization is necessary to provide a stronger mathematical justification for using TV minimization in signal processing. In this work, we deal with an intermediate case between one- and two-dimensional cases; that is, a discrete function to be processed is two-dimensional radially symmetric piecewise constant. For this case, the exact solution to the problem can be obtained as follows: first, calculate the average values over rings of the noisy function; second, calculate the shift values and their directions using closed formulae depending on a regularization parameter and structure of rings. Despite the TV regularization is effective for noise removal; it often destroys fine details and thin structures of images. In order to overcome this drawback, we use the TV regularization for signal denoising subject to linear signal variations are bounded.
Hidden Regular Variation: Detection and Estimation
Mitra, Abhimanyu
2010-01-01
Hidden regular variation defines a subfamily of distributions satisfying multivariate regular variation on $\\mathbb{E} = [0, \\infty]^d \\backslash \\{(0,0, ..., 0) \\} $ and models another regular variation on the sub-cone $\\mathbb{E}^{(2)} = \\mathbb{E} \\backslash \\cup_{i=1}^d \\mathbb{L}_i$, where $\\mathbb{L}_i$ is the $i$-th axis. We extend the concept of hidden regular variation to sub-cones of $\\mathbb{E}^{(2)}$ as well. We suggest a procedure of detecting the presence of hidden regular variation, and if it exists, propose a method of estimating the limit measure exploiting its semi-parametric structure. We exhibit examples where hidden regular variation yields better estimates of probabilities of risk sets.
A multiplicative regularization for force reconstruction
Aucejo, M.; De Smet, O.
2017-02-01
Additive regularizations, such as Tikhonov-like approaches, are certainly the most popular methods for reconstructing forces acting on a structure. These approaches require, however, the knowledge of a regularization parameter, that can be numerically computed using specific procedures. Unfortunately, these procedures are generally computationally intensive. For this particular reason, it could be of primary interest to propose a method able to proceed without defining any regularization parameter beforehand. In this paper, a multiplicative regularization is introduced for this purpose. By construction, the regularized solution has to be calculated in an iterative manner. In doing so, the amount of regularization is automatically adjusted throughout the resolution process. Validations using synthetic and experimental data highlight the ability of the proposed approach in providing consistent reconstructions.
Regular Disjunction-Free Default Theories
Xi-ShunZhao
2004-01-01
In this paper, the class of regular disjunction-free default theories is introduced and investigated. A transformation from regular default theories to normal default theories is established. The initial theory and the transformed theory have the same extensions when restricted to old variables. Hence, regular default theories enjoy some similar properties (e.g., existence of extensions, semi-monotonicity) as normal default theories. Then, a new algorithm for credulous reasoning of regular theories is developed. This algorithm runs in a time not more than O(1.45n), where n is the number of defaults. In case of regular prerequisite-free or semi-2CNF default theories, the credulous reasoning can be solved in polynomial time. However, credulous reasoning for semi-Horn default theories is shown to be NP-complete although it is tractable for Horn default theories. Moreover, skeptical reasoning for regular unary default theories is co-NP-complete.
Regular Disjunction-Free Default Theories
Xi-Shun Zhao
2004-01-01
In this paper, the class of regular disjunction-free default theories is introduced and investigated.A transformation from regular default theories to normal default theories is established. The initial theory and the transformed theory have the same extensions when restricted to old variables. Hence, regular default theories enjoy some similar properties (e.g., existence of extensions, semi-monotonicity) as normal default theories. Then,a new algorithm for credulous reasoning of regular theories is developed. This algorithm runs in a time not more than O(1.45n), where n is the number of defaults. In case of regular prerequisite-free or semi-2CNF default theories, the credulous reasoning can be solved in polynomial time. However, credulous reasoning for semi-Horn default theories is shown to be NP-complete although it is tractable for Horn default theories. Moreover, skeptical reasoning for regular unary default theories is co-NP-complete.
Freight Shuttle System: Cross-Border Movement of Goods
Levien, Mary
2011-05-31
The Freight Shuttle System (FSS) is designed to provide freight transportation services between those short and intermediate distance locations (within 600 miles) that are currently handling large volumes of freight traffic. Much like trucks, the FSS's transporters are autonomous: each transporter has its own propulsion and travels independently of other transporters. Inspired by railroads, each FSS transporter has steel wheels operating on a steel running surface and can carry either a standardsize freight container or an over-the-road truck trailer. However, unlike either rail or trucks, the FSS runs on an elevated, dedicated guideway to avoid the interference of other transportation systems. The objective of this report is to examine the potential viability for an alternative transportation system for trailers and containers in a multi-national, cross-border setting. The El Paso-Ciudad Juarez region serves as the environment of this analysis.
Regularity effect in prospective memory during aging
Geoffrey Blondelle
2016-10-01
Full Text Available Background: Regularity effect can affect performance in prospective memory (PM, but little is known on the cognitive processes linked to this effect. Moreover, its impacts with regard to aging remain unknown. To our knowledge, this study is the first to examine regularity effect in PM in a lifespan perspective, with a sample of young, intermediate, and older adults. Objective and design: Our study examined the regularity effect in PM in three groups of participants: 28 young adults (18–30, 16 intermediate adults (40–55, and 25 older adults (65–80. The task, adapted from the Virtual Week, was designed to manipulate the regularity of the various activities of daily life that were to be recalled (regular repeated activities vs. irregular non-repeated activities. We examine the role of several cognitive functions including certain dimensions of executive functions (planning, inhibition, shifting, and binding, short-term memory, and retrospective episodic memory to identify those involved in PM, according to regularity and age. Results: A mixed-design ANOVA showed a main effect of task regularity and an interaction between age and regularity: an age-related difference in PM performances was found for irregular activities (older < young, but not for regular activities. All participants recalled more regular activities than irregular ones with no age effect. It appeared that recalling of regular activities only involved planning for both intermediate and older adults, while recalling of irregular ones were linked to planning, inhibition, short-term memory, binding, and retrospective episodic memory. Conclusion: Taken together, our data suggest that planning capacities seem to play a major role in remembering to perform intended actions with advancing age. Furthermore, the age-PM-paradox may be attenuated when the experimental design is adapted by implementing a familiar context through the use of activities of daily living. The clinical
Ambiguities in Pauli-Villars regularization
Kleiss, Ronald H P
2014-01-01
We investigate regularization of scalar one-loop integrals in the Pauli- Villars subtraction scheme. The results depend on the number of sub- tractions, in particular the finite terms that survive after the diver- gences have been absorbed by renormalization. Therefore the process of Pauli-Villars regularization is ambiguous. We discuss how these am- biguities may be resolved by applying an asymptotically large number of subtractions, which results in a regularization that is automatically valid in any number of dimensions.
Regularized brain reading with shrinkage and smoothing
Wehbe, Leila; Ramdas, Aaditya; Steorts, Rebecca C.; Shalizi, Cosma Rohilla
2014-01-01
Functional neuroimaging measures how the brain responds to complex stimuli. However, sample sizes are modest, noise is substantial, and stimuli are high dimensional. Hence, direct estimates are inherently imprecise and call for regularization. We compare a suite of approaches which regularize via shrinkage: ridge regression, the elastic net (a generalization of ridge regression and the lasso), and a hierarchical Bayesian model based on small area estimation (SAE). We contrast regularization w...
Branch Processes of Regular Magnetic Monopole
MO Shu-Fan; REN Ji-Rong; ZHU Tao
2009-01-01
In this paper, by making use of Duan's topological current theory, the branch process of regular magnetic monopoles is discussed in detail Regular magnetic monopoles are found generating or annihilating at the limit point and encountering, splitting, or merging at the bifurcation point and the degenerate point systematically of the vector order parameter field φ(x).Furthermore, it is also shown that when regular magnetic monopoles split or merge at the degenerate point of field function φ, the total topological charges of the regular magnetic monopoles axe still unchanged.
Iterative Regularization with Minimum-Residual Methods
Jensen, Toke Koldborg; Hansen, Per Christian
2007-01-01
We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES their success...... as regularization methods is highly problem dependent....
Iterative regularization with minimum-residual methods
Jensen, Toke Koldborg; Hansen, Per Christian
2006-01-01
We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES - their success...... as regularization methods is highly problem dependent....
Ideal-comparability over Regular Rings
Huan Yin CHEN; Miao Sen CHEN
2006-01-01
We introduce the concept of ideal-comparability condition for regular rings. Let I be an ideal of a regular ring R. If R satisfies the Ⅰ-comparability condition, then R is one-sided unit-regular if and only if so is R/I. Also, we show that a regular ring R satisfies the general comparability if and only if the following hold: (1) R/I satisfies the general comparability; (2) R satisfies the general Ⅰ-comparability condition; (3) The natural map B(R) → B(R/I) is surjective.
Local and Nonlocal Regularization to Image Interpolation
Yi Zhan
2014-01-01
Full Text Available This paper presents an image interpolation model with local and nonlocal regularization. A nonlocal bounded variation (BV regularizer is formulated by an exponential function including gradient. It acts as the Perona-Malik equation. Thus our nonlocal BV regularizer possesses the properties of the anisotropic diffusion equation and nonlocal functional. The local total variation (TV regularizer dissipates image energy along the orthogonal direction to the gradient to avoid blurring image edges. The derived model efficiently reconstructs the real image, leading to a natural interpolation which reduces blurring and staircase artifacts. We present experimental results that prove the potential and efficacy of the method.
Regularization and error assignment to unfolded distributions
Zech, Gunter
2011-01-01
The commonly used approach to present unfolded data only in graphical formwith the diagonal error depending on the regularization strength is unsatisfac-tory. It does not permit the adjustment of parameters of theories, the exclusionof theories that are admitted by the observed data and does not allow the com-bination of data from different experiments. We propose fixing the regulariza-tion strength by a p-value criterion, indicating the experimental uncertaintiesindependent of the regularization and publishing the unfolded data in additionwithout regularization. These considerations are illustrated with three differentunfolding and smoothing approaches applied to a toy example.
Bit-coded regular expression parsing
Nielsen, Lasse; Henglein, Fritz
2011-01-01
Regular expression parsing is the problem of producing a parse tree of a string for a given regular expression. We show that a compact bit representation of a parse tree can be produced efficiently, in time linear in the product of input string size and regular expression size, by simplifying...... the DFA-based parsing algorithm due to Dub ´e and Feeley to emit the bits of the bit representation without explicitly materializing the parse tree itself. We furthermore show that Frisch and Cardelli’s greedy regular expression parsing algorithm can be straightforwardly modified to produce bit codings...
The regularity of quotient paratopological groups
Banakh, Taras
2010-01-01
Let $H$ be a closed subgroup of a regular abelian paratopological group $G$. The group reflexion $G^\\flat$ of $G$ is the group $G$ endowed with the strongest group topology, weaker that the original topology of $G$. We show that the quotient $G/H$ is Hausdorff (and regular) if $H$ is closed (and locally compact) in $G^\\flat$. On the other hand, we construct an example of a regular abelian paratopological group $G$ containing a closed discrete subgroup $H$ such that the quotient $G/H$ is Hausdorff but not regular.
Orbital Fitness: An Overview of Space Shuttle Cardiopulmonary Exercise Physiology Findings
Moore, Alan D.
2011-01-01
Limited observations regarding the cardiopulmonary responses to aerobic exercise had been conducted during short-duration spaceflight before the Space Shuttle program. This presentation focuses on the findings regarding changes observed in the cardiopulmonary exercise responses during and following Shuttle flights. During flight, maximum oxygen uptake (VO2max) remained unchanged as did the maximum work rate achievable during cycle exercise testing conducted during the last full flight day. Immediately following flight, the ubiquitous finding, confirmed by investigations conducted during the Spacelab Life Sciences missions 1 and 2 and by NASA Detailed Supplemental Objective studies, indicated that VO2max was reduced; however, the reduction in VO2max was transient and returned to preflight levels within 7 days following return. Studies regarding the influence of aerobic exercise countermeasures performed during flight on postflight performance were mostly limited to the examination of the heart rate (HR) response to submaximal exercise testing on landing day. These studies revealed that exercise HR was elevated in individuals who performed little to no exercise during their missions as compared to individuals who performed regular exercise. In addition, astronauts who performed little to no aerobic exercise during flight demonstrated an increased HR and lowered pulse pressure response to the standard stand test on landing day, indicating a decrease in orthostatic function in these individuals. With regard to exercise modality, four devices were examined during the Shuttle era: two treadmills, a cycle ergometer, and a rowing device. Although there were limited investigations regarding the use of these devices for exercise training aboard the Shuttle, there was no clear consensus reached regarding which proved to be a "superior" device. Each device had a unique operational or physiologic limitation associated with its use. In conclusion, exercise research conducted
Continuum regularization of quantum field theory
Bern, Z.
1986-04-01
Possible nonperturbative continuum regularization schemes for quantum field theory are discussed which are based upon the Langevin equation of Parisi and Wu. Breit, Gupta and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the ''fifth-time'' of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, two difficulties arise which, in general, ruins the scheme. One problem is that the superficial quadratic divergences force a bottomless action for the noise. Another difficulty is that stochastic regularization by fifth-time smearing is incompatible with Zwanziger's gauge fixing, which is the only known nonperturbaive covariant gauge fixing for nonabelian gauge theories. Finally, a successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest. Hopefully, the scheme will lend itself to nonperturbative analysis. 44 refs., 16 figs.
Regular Decompositions for H(div) Spaces
Kolev, Tzanio [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Center for Applied Scientific Computing; Vassilevski, Panayot [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Center for Applied Scientific Computing
2012-01-01
We study regular decompositions for H(div) spaces. In particular, we show that such regular decompositions are closely related to a previously studied “inf-sup” condition for parameter-dependent Stokes problems, for which we provide an alternative, more direct, proof.
Adaptive regularization of noisy linear inverse problems
Hansen, Lars Kai; Madsen, Kristoffer Hougaard; Lehn-Schiøler, Tue
2006-01-01
In the Bayesian modeling framework there is a close relation between regularization and the prior distribution over parameters. For prior distributions in the exponential family, we show that the optimal hyper-parameter, i.e., the optimal strength of regularization, satisfies a simple relation: T...
12 CFR 725.3 - Regular membership.
2010-01-01
... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Regular membership. 725.3 Section 725.3 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.3 Regular membership. (a) A natural person...
Fast and compact regular expression matching
Bille, Philip; Farach-Colton, Martin
2008-01-01
We study 4 problems in string matching, namely, regular expression matching, approximate regular expression matching, string edit distance, and subsequence indexing, on a standard word RAM model of computation that allows logarithmic-sized words to be manipulated in constant time. We show how...
Regularity of harmonic maps with the potential
CHU; Yuming
2006-01-01
The aim of this work is to prove the partial regularity of the harmonic maps with potential. The main difficulty caused by the potential is how to find the equation satisfied by the scaling function. Under the assumption on the potential we can obtain the equation, however, for a general potential, even if it is smooth, the partial regularity is still open.
On the Equivalence of Regularization Schemes
YANG Ji-Feng
2002-01-01
We illustrate via the sunset diagram that dimensional regularization ‘deforms' the nonlocal contentsof multi-loop diagrams with its equivalence to cutoff regularization scheme recovered only after sub-divergence wassubtracted. Then we employed a differential equation approach for calculating loop diagrams to verify that dimensionalare argued especially in nonperturbativc perspective.
Regular Event Structures and Finite Petri Nets
Nielsen, M.; Thiagarajan, P.S.
2002-01-01
We present the notion of regular event structures and conjecture that they correspond exactly to finite 1-safe Petri nets. We show that the conjecture holds for the conflict-free case. Even in this restricted setting, the proof is non-trivial and involves a natural subclass of regular event...
Regularity Re-Revisited: Modality Matters
Tsapkini, Kyrana; Jarema, Gonia; Kehayia, Eva
2004-01-01
The issue of regular-irregular past tense formation was examined in a cross-modal lexical decision task in Modern Greek, a language where the orthographic and phonological overlap between present and past tense stems is the same for both regular and irregular verbs. The experiment described here is a follow-up study of previous visual lexical…
Regularization algorithms based on total least squares
Hansen, Per Christian; O'Leary, Dianne P.
1996-01-01
Discretizations of inverse problems lead to systems of linear equations with a highly ill-conditioned coefficient matrix, and in order to compute stable solutions to these systems it is necessary to apply regularization methods. Classical regularization methods, such as Tikhonov's method or trunc...
A regularized stationary mean-field game
Yang, Xianjin
2016-04-19
In the thesis, we discuss the existence and numerical approximations of solutions of a regularized mean-field game with a low-order regularization. In the first part, we prove a priori estimates and use the continuation method to obtain the existence of a solution with a positive density. Finally, we introduce the monotone flow method and solve the system numerically.
Space shuttle digital flight control system
Minott, G. M.; Peller, J. B.; Cox, K. J.
1976-01-01
The space shuttle digital, fly by wire, flight control system presents an interesting challenge in avionics system design. In residence in each of four redundant general purpose computers at lift off are the guidance, navigation, and control algorithms for the entire flight. The mission is divided into several flight segments: first stage ascent, second stage ascent; abort to launch site, abort once around; on orbit operations, entry, terminal area energy management; and approach and landing. The FCS is complicated in that it must perform the functions to fly the shuttle as a boost vehicle, as a spacecraft, as a reentry vehicle, and as a conventional aircraft. The crew is provided with both manual and automatic modes of operations in all flight phases including touchdown and rollout.
Optomechanical photon shuttling between photonic cavities
Li, Huan
2014-01-01
Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave-mixing between photons and phonons and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong nonlocal effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a novel multi-cavity optomechanical device: a "photon see-saw", in which torsional optomechanical motion can shuttle photons between two photonic crystal nanocavities. The resonance frequencies of the two cavities, one on each side of the see-saw, are modulated anti-symmetrically by the device's rotation. Pumping photons into one cavity excites optomechanical self-oscillation which strongly modulates the inter-cavity coupling and shuttles photons to the other...
Optomechanical photon shuttling between photonic cavities.
Li, Huan; Li, Mo
2014-11-01
Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave mixing between photons and phonons, and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong non-local effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a multicavity optomechanical device in which torsional optomechanical motion can shuttle photons between two photonic crystal nanocavities. The resonance frequencies of the two cavities, one on each side of this 'photon see-saw', are modulated antisymmetrically by the device's rotation. Pumping photons into one cavity excites optomechanical self-oscillation, which strongly modulates the inter-cavity coupling and shuttles photons to the other empty cavity during every oscillation cycle in a well-regulated fashion.
Space Shuttle security policies and programs
Keith, E. L.
1985-01-01
The Space Shuttle vehicle consists of the orbiter, external tank, and two solid rocket boosters. In dealing with security two major protective categories are considered, taking into account resource protection and information protection. A review is provided of four basic programs which have to be satisfied. Aspects of science and technology transfer are discussed. The restrictions for the transfer of science and technology information are covered under various NASA Management Instructions (NMI's). There were two major events which influenced the protection of sensitive and private information on the Space Shuttle program. The first event was a manned space flight accident, while the second was the enactment of a congressional bill to establish the rights of privacy. Attention is also given to national resource protection and national defense classified operations.
Shuttle Kit Freezer Refrigeration Unit Conceptual Design
Copeland, R. J.
1975-01-01
The refrigerated food/medical sample storage compartment as a kit to the space shuttle orbiter is examined. To maintain the -10 F in the freezer kit, an active refrigeration unit is required, and an air cooled Stirling Cycle refrigerator was selected. The freezer kit contains two subsystems, the refrigeration unit, and the storage volume. The freezer must provide two basic capabilities in one unit. One requirement is to store 215 lbs of food which is consumed in a 30-day period by 7 people. The other requirement is to store 128.3 lbs of medical samples consisting of both urine and feces. The unit can be mounted on the lower deck of the shuttle cabin, and will occupy four standard payload module compartments on the forward bulkhead. The freezer contains four storage compartments.
STS-74 Space Shuttle Mission Report
Fricke, Robert W., Jr.
1996-01-01
The STS-74 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Reusable Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the seventy-third flight of the Space Shuttle Program, the forty-eighth flight since the return-to-flight, and the fifteenth flight of the Orbiter Atlantis (OV-104). In addition to the Orbiter, the flight vehicle consisted of an ET that was designated ET-74; three Phase 11 SSME's that were designated as serial numbers 2012, 2026, and 2032 in positions 1, 2, and 3, respectively; and two SRB's that were designated BI-076. The RSRM's, designated RSRM-51, were installed in each SRB and the individual RSRM's were designated as 360TO51 A for the left SRB, and 360TO51 B for the right SRB. The primary objectives of this flight were to rendezvous and dock with the Mir Space Station and perform life sciences investigations. The Russian Docking Module (DM) was berthed onto the Orbiter Docking System (ODS) using the Remote Manipulator System (RMS), and the Orbiter docked to the Mir with the DM. When separating from the Mir, the Orbiter undocked, leaving the DM attached to the Mir. The two solar arrays, mounted on the DM, were delivered for future Russian installation to the Mir. The secondary objectives of the flight were to perform the operations necessary to fulfill the requirements of the GLO experiment (GLO-4)/Photogrammetric Appendage Structural Dynamics Experiment Payload (PASDE) (GPP), the IMAX Cargo Bay Camera (ICBC), and the Shuttle Amateur Radio Experiment-2 (SAREX-2). Appendix A lists the sources of data, both formal and informal, that were used to prepare this report. Appendix B provides the definition of acronyms and abbreviations used throughout the report. All times during the flight are given in Greenwich mean time (GMT)) and mission elapsed time (MET).
Shuttle Performance: Lessons Learned, part 1
Arrington, J. P. (Compiler); Jones, J. J. (Compiler)
1983-01-01
Beginning with the first orbital flight of the Space Shuttle, a great wealth of flight data became available to the aerospace community. These data were immediately subjected to analyses by several different groups with different viewpoints and motivations. The results were collected and presented in several papers in the subject areas of ascent and entry aerodynaics; guidance, navigation, and control; aerothermal environment prediction; thermal protection systems; and measurement techniques.
Cryogenic Michelson Interferometer on the Space Shuttle
Wellard, Stan; Blakeley, Jeff; Brown, Steven; Bartschi, Brent
1993-01-01
A helium-cooled interferometer was flown aboard shuttle ifight STS-39. This interferometer, along with its sister radiometer, set new benchmarks for the quantity and quality of data collected. The interferometer generated approximately 150,000 interferograms during the course of the ifight. Data was collected at tangent heights from the earth's surface to celestial targets. The interferograms encoded spectral data from aurora, earth limb, and earth terminator scenes. The interfemmeter collect...
A Simplified Shuttle Irradiation Facility for ATR
Palmer, Alma Joseph; Laflin, S. T.
1999-09-01
During the past fifteen years there has been a steady increase in the demand for radioisotopes in nuclear medicine and a corresponding decline in the number of reactors within the U.S. capable of producing them. The Advanced Test Reactor (ATR) is the largest operating test reactor in the U.S., but its isotope production capabilities have been limited by the lack of an installed isotope shuttle irradiation system. A concept for a simple “low cost” shuttle irradiation facility for ATR has been developed. Costs were reduced (in comparison to previous ATR designs) by using a shielded trough of water installed in an occupiable cubicle as a shielding and contamination control barrier for the send and receive station. This shielding concept also allows all control valves to be operated by hand and thus the need for an automatic control system was eliminated. It was determined that 4 – 5 ft of water would be adequate to shield the isotopes of interest while shuttles are transferred to a small carrier. An additional feature of the current design is a non-isolatable by-pass line, which provides a minimum coolant flow to the test region regardless of which control valves are opened or closed. This by-pass line allows the shuttle facility to be operated without bringing reactor coolant water into the cubicle except for send and receive operations. The irradiation position selected for this concept is a 1.5 inch “B” hole (B-11). This position provides neutron fluxes of approximately: 1.6 x 1014 (<0.5 eV) and 4.0 x 1013 (>0.8 MeV) n/cm2*sec.
Space shuttle entry terminal area energy management
Moore, Thomas E.
1991-01-01
A historical account of the development for Shuttle's Terminal Area Energy Management (TAEM) is presented. A derivation and explanation of logic and equations are provided as a supplement to the well documented guidance computation requirements contained within the official Functional Subsystem Software Requirements (FSSR) published by Rockwell for NASA. The FSSR contains the full set of equations and logic, whereas this document addresses just certain areas for amplification.
Minimal regular 2-graphs and applications
FAN; Hongbing; LIU; Guizhen; LIU; Jiping
2006-01-01
A 2-graph is a hypergraph with edge sizes of at most two. A regular 2-graph is said to be minimal if it does not contain a proper regular factor. Let f2(n) be the maximum value of degrees over all minimal regular 2-graphs of n vertices. In this paper, we provide a structure property of minimal regular 2-graphs, and consequently, prove that f2(n) = n+3-i/3where 1 ≤i≤6, i=n (mod 6) andn≥ 7, which solves a conjecture posed by Fan, Liu, Wu and Wong. As applications in graph theory, we are able to characterize unfactorable regular graphs and provide the best possible factor existence theorem on degree conditions. Moreover, f2(n) and the minimal 2-graphs can be used in the universal switch box designs, which originally motivated this study.
Regular Expression Matching and Operational Semantics
Rathnayake, Asiri; 10.4204/EPTCS.62.3
2011-01-01
Many programming languages and tools, ranging from grep to the Java String library, contain regular expression matchers. Rather than first translating a regular expression into a deterministic finite automaton, such implementations typically match the regular expression on the fly. Thus they can be seen as virtual machines interpreting the regular expression much as if it were a program with some non-deterministic constructs such as the Kleene star. We formalize this implementation technique for regular expression matching using operational semantics. Specifically, we derive a series of abstract machines, moving from the abstract definition of matching to increasingly realistic machines. First a continuation is added to the operational semantics to describe what remains to be matched after the current expression. Next, we represent the expression as a data structure using pointers, which enables redundant searches to be eliminated via testing for pointer equality. From there, we arrive both at Thompson's lock...
A linear functional strategy for regularized ranking.
Kriukova, Galyna; Panasiuk, Oleksandra; Pereverzyev, Sergei V; Tkachenko, Pavlo
2016-01-01
Regularization schemes are frequently used for performing ranking tasks. This topic has been intensively studied in recent years. However, to be effective a regularization scheme should be equipped with a suitable strategy for choosing a regularization parameter. In the present study we discuss an approach, which is based on the idea of a linear combination of regularized rankers corresponding to different values of the regularization parameter. The coefficients of the linear combination are estimated by means of the so-called linear functional strategy. We provide a theoretical justification of the proposed approach and illustrate them by numerical experiments. Some of them are related with ranking the risk of nocturnal hypoglycemia of diabetes patients.
On regularizations of the Dirac delta distribution
Hosseini, Bamdad; Nigam, Nilima; Stockie, John M.
2016-01-01
In this article we consider regularizations of the Dirac delta distribution with applications to prototypical elliptic and hyperbolic partial differential equations (PDEs). We study the convergence of a sequence of distributions SH to a singular term S as a parameter H (associated with the support size of SH) shrinks to zero. We characterize this convergence in both the weak-* topology of distributions and a weighted Sobolev norm. These notions motivate a framework for constructing regularizations of the delta distribution that includes a large class of existing methods in the literature. This framework allows different regularizations to be compared. The convergence of solutions of PDEs with these regularized source terms is then studied in various topologies such as pointwise convergence on a deleted neighborhood and weighted Sobolev norms. We also examine the lack of symmetry in tensor product regularizations and effects of dissipative error in hyperbolic problems.
STS-68 Space Shuttle mission report
Fricke, Robert W., Jr.
1995-01-01
The STS-68 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the sixty-fifth flight of the Space Shuttle Program and the seventh flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET that was designated ET-65; three SSMEs that were designated as serial numbers 2028, 2033, and 2026 in positions 1, 2, and 3, respectively; and two SRBs that were designated BI-067. The RSRMs that were installed in each SRB were designated as 360W040A for the left SRB and 360W040B for the right SRB. The primary objective of this flight was to successfully perform the operations of the Space Radar Laboratory-2 (SRL-2). The secondary objectives of the flight were to perform the operations of the Chromosome and Plant Cell Division in Space (CHROMEX), the Commercial Protein Crystal Growth (CPCG), the Biological Research in Canisters (BRIC), the Cosmic Radiation Effects and Activation Monitor (CREAM), the Military Application of Ship Tracks (MAST), and five Get-Away Special (GAS) payloads.
Quantitative regularities in floodplain formation
Nevidimova, O.
2009-04-01
Quantitative regularities in floodplain formation Modern methods of the theory of complex systems allow to build mathematical models of complex systems where self-organizing processes are largely determined by nonlinear effects and feedback. However, there exist some factors that exert significant influence on the dynamics of geomorphosystems, but hardly can be adequately expressed in the language of mathematical models. Conceptual modeling allows us to overcome this difficulty. It is based on the methods of synergetic, which, together with the theory of dynamic systems and classical geomorphology, enable to display the dynamics of geomorphological systems. The most adequate for mathematical modeling of complex systems is the concept of model dynamics based on equilibrium. This concept is based on dynamic equilibrium, the tendency to which is observed in the evolution of all geomorphosystems. As an objective law, it is revealed in the evolution of fluvial relief in general, and in river channel processes in particular, demonstrating the ability of these systems to self-organization. Channel process is expressed in the formation of river reaches, rifts, meanders and floodplain. As floodplain is a periodically flooded surface during high waters, it naturally connects river channel with slopes, being one of boundary expressions of the water stream activity. Floodplain dynamics is inseparable from the channel dynamics. It is formed at simultaneous horizontal and vertical displacement of the river channel, that is at Y=Y(x, y), where х, y - horizontal and vertical coordinates, Y - floodplain height. When dу/dt=0 (for not lowering river channel), the river, being displaced in a horizontal plane, leaves behind a low surface, which flooding during high waters (total duration of flooding) changes from the maximum during the initial moment of time t0 to zero in the moment tn. In a similar manner changed is the total amount of accumulated material on the floodplain surface
Microbiological Lessons Learned from the Space Shuttle
Pierson, Duane L.; Ott, C. Mark; Bruce, Rebekah; Castro, Victoria A.; Mehta, Satish K.
2011-01-01
After 30 years of being the centerpiece of NASA s human spacecraft, the Space Shuttle will retire. This highly successful program provided many valuable lessons for the International Space Station (ISS) and future spacecraft. Major microbiological risks to crewmembers include food, water, air, surfaces, payloads, animals, other crewmembers, and ground support personnel. Adverse effects of microorganisms are varied and can jeopardize crew health and safety, spacecraft systems, and mission objectives. Engineering practices and operational procedures can minimize the negative effects of microorganisms. To minimize problems associated with microorganisms, appropriate steps must begin in the design phase of new spacecraft or space habitats. Spacecraft design must include requirements to control accumulation of water including humidity, leaks, and condensate on surfaces. Materials used in habitable volumes must not contribute to microbial growth. Use of appropriate materials and the implementation of robust housekeeping that utilizes periodic cleaning and disinfection will prevent high levels of microbial growth on surfaces. Air filtration can ensure low levels of bioaerosols and particulates in the breathing air. The use of physical and chemical steps to disinfect drinking water coupled with filtration can provide safe drinking water. Thorough preflight examination of flight crews, consumables, and the environment can greatly reduce pathogens in spacecraft. The advances in knowledge of living and working onboard the Space Shuttle formed the foundation for environmental microbiology requirements and operations for the International Space Station (ISS) and future spacecraft. Research conducted during the Space Shuttle Program resulted in an improved understanding of the effects of spaceflight on human physiology, microbial properties, and specifically the host-microbe interactions. Host-microbe interactions are substantially affected by spaceflight. Astronaut immune
Launch Vehicle Demonstrator Using Shuttle Assets
Threet, Grady E., Jr.; Creech, Dennis M.; Philips, Alan D.; Water, Eric D.
2011-01-01
The Marshall Space Flight Center Advanced Concepts Office (ACO) has the leading role for NASA s preliminary conceptual launch vehicle design and performance analysis. Over the past several years the ACO Earth-to-Orbit Team has evaluated thousands of launch vehicle concept variations for a multitude of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). NASA plans to continue human space exploration and space station utilization. Launch vehicles used for heavy lift cargo and crew will be needed. One of the current leading concepts for future heavy lift capability is an inline one and a half stage concept using solid rocket boosters (SRB) and based on current Shuttle technology and elements. Potentially, the quickest and most cost-effective path towards an operational vehicle of this configuration is to make use of a demonstrator vehicle fabricated from existing shuttle assets and relying upon the existing STS launch infrastructure. Such a demonstrator would yield valuable proof-of-concept data and would provide a working test platform allowing for validated systems integration. Using shuttle hardware such as existing RS-25D engines and partial MPS, propellant tanks derived from the External Tank (ET) design and tooling, and four-segment SRB s could reduce the associated upfront development costs and schedule when compared to a concept that would rely on new propulsion technology and engine designs. There are potentially several other additional benefits to this demonstrator concept. Since a concept of this type would be based on man-rated flight proven hardware components, this demonstrator has the potential to evolve into the first iteration of heavy lift crew or cargo and serve as a baseline for block upgrades. This vehicle could also serve as a demonstration
Multiple graph regularized protein domain ranking
Wang, Jim Jing-Yan
2012-11-19
Background: Protein domain ranking is a fundamental task in structural biology. Most protein domain ranking methods rely on the pairwise comparison of protein domains while neglecting the global manifold structure of the protein domain database. Recently, graph regularized ranking that exploits the global structure of the graph defined by the pairwise similarities has been proposed. However, the existing graph regularized ranking methods are very sensitive to the choice of the graph model and parameters, and this remains a difficult problem for most of the protein domain ranking methods.Results: To tackle this problem, we have developed the Multiple Graph regularized Ranking algorithm, MultiG-Rank. Instead of using a single graph to regularize the ranking scores, MultiG-Rank approximates the intrinsic manifold of protein domain distribution by combining multiple initial graphs for the regularization. Graph weights are learned with ranking scores jointly and automatically, by alternately minimizing an objective function in an iterative algorithm. Experimental results on a subset of the ASTRAL SCOP protein domain database demonstrate that MultiG-Rank achieves a better ranking performance than single graph regularized ranking methods and pairwise similarity based ranking methods.Conclusion: The problem of graph model and parameter selection in graph regularized protein domain ranking can be solved effectively by combining multiple graphs. This aspect of generalization introduces a new frontier in applying multiple graphs to solving protein domain ranking applications. 2012 Wang et al; licensee BioMed Central Ltd.
J-regular rings with injectivities
Shen, Liang
2010-01-01
A ring $R$ is called a J-regular ring if R/J(R) is von Neumann regular, where J(R) is the Jacobson radical of R. It is proved that if R is J-regular, then (i) R is right n-injective if and only if every homomorphism from an $n$-generated small right ideal of $R$ to $R_{R}$ can be extended to one from $R_{R}$ to $R_{R}$; (ii) R is right FP-injective if and only if R is right (J, R)-FP-injective. Some known results are improved.
Low power implementation of datapath using regularity
LAI Li-ya; LIU Peng
2005-01-01
Datapath accounts for a considerable part of power consumption in VLSI circuit design. This paper presents a method for physical implementation of datapath to achieve low power consumption. Regularity is a characteristic of datapath and the key of the proposed method, where synthesis is tightly combined with placement to make full use of regularity, so that low power consumption is achieved. In This paper, a new concept of Synthesis In Relative Placement (SIRP) is given to deal with the semi-regularity in some datapath. Experimental results of a sample circuit validated the proposed method.
REGULARIZATION OF SINGULAR SYSTEMS BY OUTPUT FEEDBACK
De-lin Chu; Da-yong Cai
2000-01-01
Problem of regularization of a singular system by derivative and proportional output feedback is studied. Necessary and sufficient conditions are obtained under which a singular system can be regularized into a closed-loop system that is regular and of index at most one. The reduced form is given that can easily explore the system properties as well as the feedback to be determined. The main results of the present paper are based on orthogonal transformations. Therefore, they can be implemented by numerically stable ways.
Limitations on Dimensional Regularization in Renyi Entropy
Bao, Ning
2016-01-01
Dimensional regularization is a common method used to regulate the UV divergence of field theoretic quantities. When it is used in the context of Renyi entropy, however, it is important to consider whether such a procedure eliminates the statistical interpretation thereof as a measure of entanglement of states living on a Hilbert space. We therefore examine the dimensionally regularized Renyi entropy of a 4d unitary CFT and show that it admits no underlying Hilbert space in the state-counting sense. This gives a concrete proof that dimensionally regularized Renyi entropy cannot always be obtained as a limit of the Renyi entropy of some finite-dimensional quantum system.
Iterative Regularization with Minimum-Residual Methods
Jensen, Toke Koldborg; Hansen, Per Christian
2007-01-01
We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES their success...
Batson, B. H.; Seyl, J. W.; Huth, G. K.
1977-01-01
This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.
Could Regular Pot Smoking Harm Vision?
... fullstory_162441.html Could Regular Pot Smoking Harm Vision? Study suggests that it might slow signaling among ... may be linked to a limited degree of vision impairment, a new French study suggests. The finding ...
Regular-fat dairy and human health
Astrup, Arne; Bradley, Beth H Rice; Brenna, J Thomas
2016-01-01
In recent history, some dietary recommendations have treated dairy fat as an unnecessary source of calories and saturated fat in the human diet. These assumptions, however, have recently been brought into question by current research on regular fat dairy products and human health. In an effort...... dairy foods have on human health. The emerging scientific evidence indicates that the consumption of regular fat dairy foods is not associated with an increased risk of cardiovascular disease and inversely associated with weight gain and the risk of obesity. Dairy foods, including regular-fat milk...... to disseminate, explore and discuss the state of the science on the relationship between regular fat dairy products and health, symposia were programmed by dairy industry organizations in Europe and North America at The Eurofed Lipids Congress (2014) in France, The Dairy Nutrition Annual Symposium (2014...
The regularization of Old English weak verbs
Marta Tío Sáenz
2015-07-01
Full Text Available This article deals with the regularization of non-standard spellings of the verbal forms extracted from a corpus. It addresses the question of what the limits of regularization are when lemmatizing Old English weak verbs. The purpose of such regularization, also known as normalization, is to carry out lexicological analysis or lexicographical work. The analysis concentrates on weak verbs from the second class and draws on the lexical database of Old English Nerthus, which has incorporated the texts of the Dictionary of Old English Corpus. As regards the question of the limits of normalization, the solution adopted are, in the first place, that when it is necessary to regularize, normalization is restricted to correspondences based on dialectal and diachronic variation and, secondly, that normalization has to be unidirectional.
On π-regularity of General Rings
CHEN WEI-XING; CUI SHU-YING
2010-01-01
A general ring means an associative ring with or without identity. An idempotent e in a general ring I is called left (right) semicentral if for every x∈ I,xe = exe (ex = exe). And I is called semiabelian ff every idempotent in I is left or right semicentral. It is proved that a semiabelian general ring I is π-regular if and only ff the set N(I) of nilpotent elements in I is an ideal of I and I/N(I) is regular. It follows that if I is a semiabelian general ring and K is an ideal of I,then I is π-regular if and only if both K and I/K are r-regular. Based on this we prove that every semiabelian GVNL-ring is an SGVNL-ring. These generalize several known results on the relevant subject. Furthermore we give a characterization of a semiabelian GVNL-ring.
A Biordered Set Representation of Regular Semigroups
Bing Jun YU; Mang XU
2005-01-01
In this paper, for an arbitrary regular biordered set E, by using biorder-isomorphisms between the ω-ideals of E, we construct a fundamental regular semigroup WE called NH-semigroup of E, whose idempotent biordered set is isomorphic to E. We prove further that WE can be used to give a new representation of general regular semigroups in the sense that, for any regular semigroup S with the idempotent biordered set isomorphic to E, there exists a homomorphism from S to WE whose kernel is the greatest idempotent-separating congruence on S and the image is a full symmetric subsemigroup of WE. Moreover, when E is a biordered set of a semilattice E0, WE is isomorphic to the Munn-semigroup TE0; and when E is the biordered set of a band B, WE is isomorphic to the Hall-semigroup WB.
Regularities and Radicals in Near-rings
N.J. Groenewald
2002-01-01
Let F be a regularity for near-rings and F(R) the largest FR-regular ideal in R. In the first part of this paper, we introduce the concepts of maximal Fmodular ideals and F-primitive near-rings to characterize F(R) for any near-ring regularity F. Under certain conditions, F(R) is equal to the intersection of all the maximal F-modular ideals of R. As examples, we apply this to the different analogs of the Brown-McCoy radicals and also the Behrens radicals. In the last part of this paper, we show that for certain regularities, the class of F-primitive near-rings forms a special class.
Spectral partitioning of random regular blockmodels
Barucca, Paolo
2016-01-01
Graph partitioning problems emerge in a wide variety of complex systems, ranging from biology to finance, but can be rigorously analyzed and solved only for a few graph ensembles. Here, an ensemble of random graphs with regular block structure is introduced, for which analytical results can be obtained. In particular, the spectral density of such random regular blockmodels is computed exactly for a modular, bipartite and core-periphery structure. McKay's law for random regular graphs is found analytically to apply also for regular modular and bipartite structures when blocks are homogeneous. In core-periphery structures, where blocks are intrinsically heterogeneous, a new law is found to apply for the spectral density. Exact solution to the inference problem is provided for the models discussed. All analytical results show perfect agreement with numerical experiments. Final discussion summarizes results and outlines the relevance of the results for the solution of graph partitioning problems in other graph en...
Comparability for ideals of regular rings
CHEN Huanyin
2005-01-01
In this paper we investigate necessary and sufficient conditions under which the ideals possess comparability structure. For regular rings, we prove that every square matrix over ideals satisfying general comparability admits a diagonal reduction by quasi invertible matrices.
Regularity of optimal transport maps and applications
Philippis, Guido
2013-01-01
In this thesis, we study the regularity of optimal transport maps and its applications to the semi-geostrophic system. The first two chapters survey the known theory, in particular there is a self-contained proof of Brenier’ theorem on existence of optimal transport maps and of Caffarelli’s Theorem on Holder continuity of optimal maps. In the third and fourth chapter we start investigating Sobolev regularity of optimal transport maps, while in Chapter 5 we show how the above mentioned results allows to prove the existence of Eulerian solution to the semi-geostrophic equation. In Chapter 6 we prove partial regularity of optimal maps with respect to a generic cost functions (it is well known that in this case global regularity can not be expected). More precisely we show that if the target and source measure have smooth densities the optimal map is always smooth outside a closed set of measure zero.
On Comparison of Adaptive Regularization Methods
Sigurdsson, Sigurdur; Larsen, Jan; Hansen, Lars Kai
2000-01-01
, a very flexible regularization may substitute the need for selection procedures. This paper investigates recently suggested adaptive regularization schemes. Some methods focus directly on minimizing an estimate of the generalization error (either algebraic or empirical), whereas others start from...... different criteria, e.g., the Bayesian evidence. The evidence expresses basically the probability of the model, which is conceptually different from generalization error; however, asymptotically for large training data sets they will converge. First the basic model definition, training and generalization...
STS-46 Space Shuttle mission report
Fricke, Robert W.
1992-10-01
The STS-46 Space Shuttle Program Mission Report contains a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle main engine (SSME) subsystem performance during the forty-ninth flight of the Space Shuttle Program, and the twelfth flight of the Orbiter vehicle Atlantis (OV-104). In addition to the Atlantis vehicle, the flight vehicle consisted of the following: an ET, designated ET-48 (LWT-41); three SSME's, which were serial numbers 2032, 2033, and 2027 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-052. The lightweight/redesigned SRM's that were installed in each SRB were designated 360W025A for the left RSRM and 360L025B for the right RSRM. The primary objective of this flight was to successfully deploy the European Retrievable Carrier (EURECA) payload and perform the operations of the Tethered Satellite System-1 (TSS-1) and the Evaluation of Oxygen Interaction with Material 3/Thermal Energy Management Processes 2A-3 (EOIM-3/TEMP 2A-3). The secondary objectives of this flight were to perform the operations of the IMAX Cargo Bay Camera (ICBC), Consortium for Material Development in Space Complex Autonomous Payload-2 and 3 (CONCAP-2 and CONCAP-3), Limited Duration Space Environment Candidate Materials Exposure (LDCE), Pituitary Growth Hormone Cell Function (PHCF), and Ultraviolet Plume Instrumentation (UVPI). In addition to summarizing subsystem performance, this report also discusses each Orbiter, ET, SSME, SRB, and RSRM in-flight anomaly in the applicable section of the report. Also included in the discussion is a reference to the assigned tracking number as published on the Problem Tracking List. All times are given in Greenwich mean time (G.m.t.) as well as mission elapsed time (MET).
STS-54 Space Shuttle mission report
Fricke, Robert W., Jr.
1993-03-01
The STS-54 Space Shuttle Program Mission Report is a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle Main Engine (SSME) subsystems performance during this fifty-third flight of the Space Shuttle Program, and the third flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET, which was designated ET-51; three SSME's, which were serial numbers 2019, 2033, and 2018 in positions 1, 2, and 3, respectively; and two retrievable and reusable SRB's which were designated BI-056. The lightweight RSRM's that were installed in each SRB were designated 360L029A for the left SRB, and 360L029B for the right SRB. The primary objectives of this flight were to perform the operations to deploy the Tracking and Data Relay Satellite-F/Inertial Upper Stage payload and to fulfill the requirements of the Diffuse X-Ray Spectrometer (DXS) payload. The secondary objective was to fly the Chromosome and Plant Cell Division in Space (CHROMEX), Commercial Generic Bioprocessing Apparatus (CGBA), Physiological and Anatomical Rodent Experiment (PARE), and the Solid Surface Combustion Experiment (SSCE). In addition to presenting a summary of subsystem performance, this report also discusses each Orbiter, ET, SSME, SRB, and RSRM in-flight anomaly in the applicable section of the report. The official tracking number for each in-flight anomaly, assigned by the cognizant project, is also shown. All times are given in Greenwich mean time (G.m.t.) and mission elapsed time (MET).
*-Regular Leavitt Path Algebras of Arbitrary Graphs
Gonzalo ARANDA PINO; Kulumani RANGASWAMY; Lia VA(S)
2012-01-01
If K is a field with involution and E an arbitrary graph,the involution from K naturally induces an involution of the Leavitt path algebra LK(E).We show that the involution on LK(E) is proper if the involution on K is positive-definite,even in the case when the graph E is not necessarily finite or row-finite.It has been shown that the Leavitt path algebra LK(E) is regular if and only if E is acyclic.We give necessary and sufficient conditions for LK(E) to be *-regular (i.e.,regular with proper involution).This characterization of *-regularity of a Leavitt path algebra is given in terms of an algebraic property of K,not just a graph-theoretic property of E.This differs from the.known characterizations of various other algebraic properties of a Leavitt path algebra in terms of graphtheoretic properties of E alone.As a corollary,we show that Handelman's conjecture (stating that every *-regular ring is unit-regular) holds for Leavitt path algebras.Moreover,its generalized version for rings with local units also continues to hold for Leavitt path algebras over arbitrary graphs.
Shuttle Abort Flight Management (SAFM) - Application Overview
Hu, Howard; Straube, Tim; Madsen, Jennifer; Ricard, Mike
2002-01-01
One of the most demanding tasks that must be performed by the Space Shuttle flight crew is the process of determining whether, when and where to abort the vehicle should engine or system failures occur during ascent or entry. Current Shuttle abort procedures involve paging through complicated paper checklists to decide on the type of abort and where to abort. Additional checklists then lead the crew through a series of actions to execute the desired abort. This process is even more difficult and time consuming in the absence of ground communications since the ground flight controllers have the analysis tools and information that is currently not available in the Shuttle cockpit. Crew workload specifically abort procedures will be greatly simplified with the implementation of the Space Shuttle Cockpit Avionics Upgrade (CAU) project. The intent of CAU is to maximize crew situational awareness and reduce flight workload thru enhanced controls and displays, and onboard abort assessment and determination capability. SAFM was developed to help satisfy the CAU objectives by providing the crew with dynamic information about the capability of the vehicle to perform a variety of abort options during ascent and entry. This paper- presents an overview of the SAFM application. As shown in Figure 1, SAFM processes the vehicle navigation state and other guidance information to provide the CAU displays with evaluations of abort options, as well as landing site recommendations. This is accomplished by three main SAFM components: the Sequencer Executive, the Powered Flight Function, and the Glided Flight Function, The Sequencer Executive dispatches the Powered and Glided Flight Functions to evaluate the vehicle's capability to execute the current mission (or current abort), as well as more than IS hypothetical abort options or scenarios. Scenarios are sequenced and evaluated throughout powered and glided flight. Abort scenarios evaluated include Abort to Orbit (ATO), Transatlantic
Space Shuttle Orbiter auxiliary power unit status
Reck, M.; Loken, G.; Horton, J.; Lukens, W.; Scott, W.; Baughman, J.; Bauch, T.
An overview of the United States Space Shuttle Orbiter APU, which provides power to the Orbiter vehicle hydraulic system, is presented. Three complete APU systems, each with its own separate fuel system, supply power to three dedicated hydraulic systems. These in turn provide power to all Orbiter vehicle critical flight functions including launch, orbit, reentry, and landing. The basic APU logic diagram is presented. The APU includes a hydrazine-powered turbine that drives a hydraulic pump and various accessories through a high-speed gearbox. The APU also features a sophisticated thermal management system designed to ensure safe and reliable operation in the various launch, orbit, reentry, and landing environments.
Langley's Space Shuttle Technology: A bibliography
Champine, G. R.
1981-01-01
This bibliography documents most of the major publications, research reports, journal articles, presentations, and contractor reports, which have been published since the inception of the Space Shuttle Technology Task Group at the NASA Langley Reseach Center on July 11, 1969. This research work was performed in house by the Center staff or under contract, monitored by the Center staff. The report is arranged according to method of publication: (1) NASA Formal Reports; (2) Contractor Reports; and (3) Articles and Conferences. Disciplines covered are in the areas of aerothermodynamics, structures, dynamics and aeroelasticity, environmental, and materials. The publications are listed without abstracts for quick reference and planning.
Space shuttle main engine hardware simulation
Vick, H. G.; Hampton, P. W.
1985-01-01
The Huntsville Simulation Laboratory (HSL) provides a simulation facility to test and verify the space shuttle main engine (SSME) avionics and software system using a maximum complement of flight type hardware. The HSL permits evaluations and analyses of the SSME avionics hardware, software, control system, and mathematical models. The laboratory has performed a wide spectrum of tests and verified operational procedures to ensure system component compatibility under all operating conditions. It is a test bed for integration of hardware/software/hydraulics. The HSL is and has been an invaluable tool in the design and development of the SSME.
Redox shuttles for lithium ion batteries
Weng, Wei; Zhang, Zhengcheng; Amine, Khalil
2014-11-04
Compounds may have general Formula IVA or IVB. ##STR00001## where, R.sup.8, R.sup.9, R.sup.10, and R.sup.11 are each independently selected from H, F, Cl, Br, CN, NO.sub.2, alkyl, haloalkyl, and alkoxy groups; X and Y are each independently O, S, N, or P; and Z' is a linkage between X and Y. Such compounds may be used as redox shuttles in electrolytes for use in electrochemical cells, batteries and electronic devices.
NASA management of the Space Shuttle Program
Peters, F.
1975-01-01
The management system and management technology described have been developed to meet stringent cost and schedule constraints of the Space Shuttle Program. Management of resources available to this program requires control and motivation of a large number of efficient creative personnel trained in various technical specialties. This must be done while keeping track of numerous parallel, yet interdependent activities involving different functions, organizations, and products all moving together in accordance with intricate plans for budgets, schedules, performance, and interaction. Some techniques developed to identify problems at an early stage and seek immediate solutions are examined.
2012-01-27
... medicine physicians who practice obstetrics on a regular basis, providers of geriatric services, pediatric... nurse midwives (CNMs), family medicine physicians who practice obstetrics on a regular basis,...
Space shuttle program: Shuttle Avionics Integration Laboratory. Volume 7: Logistics management plan
1974-01-01
The logistics management plan for the shuttle avionics integration laboratory defines the organization, disciplines, and methodology for managing and controlling logistics support. Those elements requiring management include maintainability and reliability, maintenance planning, support and test equipment, supply support, transportation and handling, technical data, facilities, personnel and training, funding, and management data.
Space shuttle/payload interface analysis (study 2.4). Volume 2: Space shuttle traffic analysis
Plough, J. A.
1973-01-01
The transfer is reported of the capability to perform capture/cost analyses to MSFC. Space shuttle performance and direct costs, tug characteristics, reliability, and cost data were provided by NASA. The launch vehicle, mission models, payloads, and computer programs are discussed along with capture/cost analysis, and cost estimates. For Vol. 1, see N74-12493.
Final Results of Shuttle MMOD Impact Database
Hyde, J. L.; Christiansen, E. L.; Lear, D. M.
2015-01-01
The Shuttle Hypervelocity Impact Database documents damage features on each Orbiter thought to be from micrometeoroids (MM) or orbital debris (OD). Data is divided into tables for crew module windows, payload bay door radiators and thermal protection systems along with other miscellaneous regions. The combined number of records in the database is nearly 3000. Each database record provides impact feature dimensions, location on the vehicle and relevant mission information. Additional detail on the type and size of particle that produced the damage site is provided when sampling data and definitive spectroscopic analysis results are available. Guidelines are described which were used in determining whether impact damage is from micrometeoroid or orbital debris impact based on the findings from scanning electron microscopy chemical analysis. Relationships assumed when converting from observed feature sizes in different shuttle materials to particle sizes will be presented. A small number of significant impacts on the windows, radiators and wing leading edge will be highlighted and discussed in detail, including the hypervelocity impact testing performed to estimate particle sizes that produced the damage.
The Least Regular Order with Respect to a Regular Congruence on Ordered Γ-Semigroups
Manoj SIRIPITUKDET; Aiyared IAMPAN
2012-01-01
The motivation mainly comes from the conditions of congruences to be regular that are of importance and interest in ordered semigroups.In 1981,Sen has introduced the concept of the Γ-semigroups.We can see that any semigroup can be considered as a Γ-semigroup.In this paper,we introduce and characterize the concept of the regular congruences on ordered Γ-semigroups and prove the following statements on an ordered Γ-semigroup M:(1) Every ordered semilattice congruences is a regular congruence.(2) There exists the least regular order on the T-semigroup M/p with respect to a regular congruence p on M.(3) The regular congruences are not ordered semilattice congruences in general.
Rowan, K M; Harrison, D A; Walsh, T S; McAuley, D F; Perkins, G D; Taylor, B L; Menon, D K
2010-12-01
To use, existing critical care and early pandemic, data to inform care during the pandemic influenza A 2009 (H1N1) pandemic (with a possible use for triage - if the demand for critical care seriously exceeded supply). To monitor the impact of the H1N1 pandemic on critical care services, in real time, with regular feedback to critical care clinicians and other relevant jurisdictions to inform ongoing policy and practice. Modelling of data and cohort study. Modelling - 148 adult, general critical care units in England, Wales and Northern Ireland in the Intensive Care National Audit & Research Centre Case Mix Programme. Cohort study - 192 acute hospitals in England, Wales, Northern Ireland, Scotland and the Republic of Ireland. Modelling - 105,397 admissions to adult, general critical care units. Cohort study - 1728 H1N1 pandemic-related admissions referred and assessed as requiring critical care. Modelling - requirement for organ support and acute hospital mortality. Cohort study - survival to the end of critical care. Modelling - cancelled or postponed, elective or scheduled surgery resulted in savings in calendar days of critical, Level 3 and advanced respiratory care of 17, 11 and 10%, respectively. These savings varied across units. Using routine, physiological variables, the best triage models, for all and for acute respiratory admissions, achieved only satisfactory concordance of 0.79 and 0.75, respectively. Application of the best model on all admissions indicated that approximately 12.5% of calendar days of critical care could be saved. Cohort study - research governance approvals were achieved for 192 acute hospitals, for 91 within 1 day of central research and development approval across the five countries. A total of 1725 cases (562 confirmed) were reported. Confirmed cases were young (mean age of 40 years), had low severity of acute illness on presentation [61% CURB-65 (confusion, urea, respiratory rate, blood pressure, age over 65 years) 0-1], but had
A Construction for P-Regular Semigroups
无
2000-01-01
@@A regular semigroup S with a special involution *, i.e., a unaryoperation on S satisfying (x*)*=x, xx*x=x, (xy)*=y*x* x, y S, is called a regular *-semigroup［1］. It has been shown by Yamada［2］ that a regular semigroup S is a regular *-semigroup if and only if ithas a P-system, that is to say, there is a subset P ofE(S) such that (c.1) (1) ( p, q P) pq E(S), pqp P; (2) ( a S) ( | a+ V(a)) aP1a+, a+P1a P.As a generalization of regular *-semigroup and orthodox semigroup,Yamada［3］ defined P-regular semigroup. Let S be a regularsemigroup. A subset P of E(S) is called a C-set in S if (c.2) (1) ( p, q P) pq E(S), pqp P; (2) ( a S) ( a+ V(a)) aP1a+, a+P1a P. In this case, (S,P) forms a P-regular semigroup, innotation S(P). The element a+ in(c.2) (2) is called a P-inverse of a. The set of all P-inverses of a is denoted by VP(a). S(P) is said to bestrongly, meanwhile P is called a strong C-set in S, ifVP(p) P for all p P. A partial groupoid E as well as its partial subgroupoid Pforms a P-regular partial band and is denoted by E(P) if itis exactly the subalgebra of the idempotents in some P-regularsemigroup S(P). In this case, S(P) is called an adjacentsemigroup E(P). All P-regular partial bands are obtained inZhang and He［4］.
Counting colorings of a regular graph
Galvin, David
2012-01-01
At most how many (proper) q-colorings does a regular graph admit? Galvin and Tetali conjectured that among all n-vertex, d-regular graphs with 2d|n, none admits more q-colorings than the disjoint union of n/2d copies of the complete bipartite graph K_{d,d}. In this note we give asymptotic evidence for this conjecture, giving an upper bound on the number of proper q-colorings admitted by an n-vertex, d-regular graph of the form a^n b^{n(1+o(1))/d} (where a and b depend on q and where o(1) goes to 0 as d goes to infinity) that agrees up to the o(1) term with the count of q-colorings of n/2d copies of K_{d,d}. An auxiliary result is an upper bound on the number of colorings of a regular graph in terms of its independence number. For example, we show that for all even q and fixed \\epsilon > 0 there is \\delta=\\delta(\\epsilon,q) such that the number of proper q-colorings admitted by an n-vertex, d-regular graph with no independent set of size n(1-\\epsilon)/2 is at most (a-\\delta)^n.
Modified sparse regularization for electrical impedance tomography.
Fan, Wenru; Wang, Huaxiang; Xue, Qian; Cui, Ziqiang; Sun, Benyuan; Wang, Qi
2016-03-01
Electrical impedance tomography (EIT) aims to estimate the electrical properties at the interior of an object from current-voltage measurements on its boundary. It has been widely investigated due to its advantages of low cost, non-radiation, non-invasiveness, and high speed. Image reconstruction of EIT is a nonlinear and ill-posed inverse problem. Therefore, regularization techniques like Tikhonov regularization are used to solve the inverse problem. A sparse regularization based on L1 norm exhibits superiority in preserving boundary information at sharp changes or discontinuous areas in the image. However, the limitation of sparse regularization lies in the time consumption for solving the problem. In order to further improve the calculation speed of sparse regularization, a modified method based on separable approximation algorithm is proposed by using adaptive step-size and preconditioning technique. Both simulation and experimental results show the effectiveness of the proposed method in improving the image quality and real-time performance in the presence of different noise intensities and conductivity contrasts.
Regular Expression Matching and Operational Semantics
Asiri Rathnayake
2011-08-01
Full Text Available Many programming languages and tools, ranging from grep to the Java String library, contain regular expression matchers. Rather than first translating a regular expression into a deterministic finite automaton, such implementations typically match the regular expression on the fly. Thus they can be seen as virtual machines interpreting the regular expression much as if it were a program with some non-deterministic constructs such as the Kleene star. We formalize this implementation technique for regular expression matching using operational semantics. Specifically, we derive a series of abstract machines, moving from the abstract definition of matching to increasingly realistic machines. First a continuation is added to the operational semantics to describe what remains to be matched after the current expression. Next, we represent the expression as a data structure using pointers, which enables redundant searches to be eliminated via testing for pointer equality. From there, we arrive both at Thompson's lockstep construction and a machine that performs some operations in parallel, suitable for implementation on a large number of cores, such as a GPU. We formalize the parallel machine using process algebra and report some preliminary experiments with an implementation on a graphics processor using CUDA.
Regularities, Natural Patterns and Laws of Nature
Stathis Psillos
2014-02-01
Full Text Available The goal of this paper is to sketch an empiricist metaphysics of laws of nature. The key idea is that there are regularities without regularity-enforcers. Differently put, there are natural laws without law-makers of a distinct metaphysical kind. This sketch will rely on the concept of a natural pattern and more significantly on the existence of a network of natural patterns in nature. The relation between a regularity and a pattern will be analysed in terms of mereology. Here is the road map. In section 2, I will briefly discuss the relation between empiricism and metaphysics, aiming to show that an empiricist metaphysics is possible. In section 3, I will offer arguments against stronger metaphysical views of laws. Then, in section 4 I will motivate nomic objectivism. In section 5, I will address the question ‘what is a regularity?’ and will develop a novel answer to it, based on the notion of a natural pattern. In section 6, I will raise the question: ‘what is a law of nature?’, the answer to which will be: a law of nature is a regularity that is characterised by the unity of a natural pattern.
Mining High Utility Itemsets with Regular Occurrence
Komate Amphawan
2016-09-01
Full Text Available High utility itemset mining (HUIM plays an important role in the data mining community and in a wide range of applications. For example, in retail business it is used for finding sets of sold products that give high profit, low cost, etc. These itemsets can help improve marketing strategies, make promotions/ advertisements, etc. However, since HUIM only considers utility values of items/itemsets, it may not be sufficient to observe product-buying behavior of customers such as information related to “regular purchases of sets of products having a high profit margin”. To address this issue, the occurrence behavior of itemsets (in the term of regularity simultaneously with their utility values was investigated. Then, the problem of mining high utility itemsets with regular occurrence (MHUIR to find sets of co-occurrence items with high utility values and regular occurrence in a database was considered. An efficient single-pass algorithm, called MHUIRA, was introduced. A new modified utility-list structure, called NUL, was designed to efficiently maintain utility values and occurrence information and to increase the efficiency of computing the utility of itemsets. Experimental studies on real and synthetic datasets and complexity analyses are provided to show the efficiency of MHUIRA combined with NUL in terms of time and space usage for mining interesting itemsets based on regularity and utility constraints.
On a correspondence between regular and non-regular operator monotone functions
Gibilisco, P.; Hansen, Frank; Isola, T.
2009-01-01
We prove the existence of a bijection between the regular and the non-regular operator monotone functions satisfying a certain functional equation. As an application we give a new proof of the operator monotonicity of certain functions related to the Wigner-Yanase-Dyson skew information.......We prove the existence of a bijection between the regular and the non-regular operator monotone functions satisfying a certain functional equation. As an application we give a new proof of the operator monotonicity of certain functions related to the Wigner-Yanase-Dyson skew information....
US Helicopter Expands Service to Newark Liberty International Airport
无
2007-01-01
@@ US Helicopter Corporation ("US Helicopter") (OTC Bulletin Board: USHP) and Continental Airlines (NYSE: CAL)announced a partnership to provide eight-minute shuttle service between Manhattan and Newark Liberty International Airport beginning Dec.18, 2006.
Mission Possible: BioMedical Experiments on the Space Shuttle
Bopp, E.; Kreutzberg, K.
2011-01-01
Biomedical research, both applied and basic, was conducted on every Shuttle mission from 1981 to 2011. The Space Shuttle Program enabled NASA investigators and researchers from around the world to address fundamental issues concerning living and working effectively in space. Operationally focused occupational health investigations and tests were given priority by the Shuttle crew and Shuttle Program management for the resolution of acute health issues caused by the rigors of spaceflight. The challenges of research on the Shuttle included: limited up and return mass, limited power, limited crew time, and requirements for containment of hazards. The sheer capacity of the Shuttle for crew and equipment was unsurpassed by any other launch and entry vehicle and the Shuttle Program provided more opportunity for human research than any program before or since. To take advantage of this opportunity, life sciences research programs learned how to: streamline the complicated process of integrating experiments aboard the Shuttle, design experiments and hardware within operational constraints, and integrate requirements between different experiments and with operational countermeasures. We learned how to take advantage of commercial-off-the-shelf hardware and developed a hardware certification process with the flexibility to allow for design changes between flights. We learned the importance of end-to-end testing for experiment hardware with humans-in-the-loop. Most importantly, we learned that the Shuttle Program provided an excellent platform for conducting human research and for developing the systems that are now used to optimize research on the International Space Station. This presentation will include a review of the types of experiments and medical tests flown on the Shuttle and the processes that were used to manifest and conduct the experiments. Learning Objective: This paper provides a description of the challenges related to launching and implementing biomedical
Legacy of Biomedical Research During the Space Shuttle Program
Hayes, Judith C.
2011-01-01
The Space Shuttle Program provided many opportunities to study the role of spaceflight on human life for over 30 years and represented the longest and largest US human spaceflight program. Outcomes of the research were understanding the effect of spaceflight on human physiology and performance, countermeasures, operational protocols, and hardware. The Shuttle flights were relatively short, Biomedical research was conducted on the Space Shuttle using various vehicle resources. Specially constructed pressurized laboratories called Spacelab and SPACEHAB housed many laboratory instruments to accomplish experiments in the Shuttle s large payload bay. In addition to these laboratory flights, nearly every mission had dedicated human life science research experiments conducted in the Shuttle middeck. Most Shuttle astronauts participated in some life sciences research experiments either as test subjects or test operators. While middeck experiments resulted in a low sample per mission compared to many Earth-based studies, this participation allowed investigators to have repetition of tests over the years on successive Shuttle flights. In addition, as a prelude to the International Space Station (ISS), NASA used the Space Shuttle as a platform for assessing future ISS hardware systems and procedures. The purpose of this panel is to provide an understanding of science integration activities required to implement Shuttle research, review biomedical research, characterize countermeasures developed for Shuttle and ISS as well as discuss lessons learned that may support commercial crew endeavors. Panel topics include research integration, cardiovascular physiology, neurosciences, skeletal muscle, and exercise physiology. Learning Objective: The panel provides an overview from the Space Shuttle Program regarding research integration, scientific results, lessons learned from biomedical research and countermeasure development.
Shadow of rotating regular black holes
Abdujabbarov, Ahmadjon; Ahmedov, Bobomurat; Ghosh, Sushant G
2016-01-01
We study the shadows cast by the different types of rotating regular black holes viz. Ay\\'on-Beato-Garc\\'ia {(ABG)}, Hayward, and Bardeen. These black holes have in addition to the total mass ($M$) and rotation parameter ($a$), different parameters as electric charge ($Q$), deviation parameter ($g$), and magnetic charge ($g_{*}$), respectively. Interestingly, the size of the shadow is affected by these parameters in addition to the rotation parameter. We found that the radius of the shadow in each case decreases monotonically and the distortion parameter increases when the value of these parameters increase. A comparison with the standard Kerr case is also investigated. We have also studied the influence of the plasma environment around regular black holes to discuss its shadow. The presence of the plasma affects the apparent size of the regular black hole's shadow to be increased due to two effects (i) gravitational redshift of the photons and (ii) radial dependence of plasma density.
Fractional Regularization Term for Variational Image Registration
Rafael Verdú-Monedero
2009-01-01
Full Text Available Image registration is a widely used task of image analysis with applications in many fields. Its classical formulation and current improvements are given in the spatial domain. In this paper a regularization term based on fractional order derivatives is formulated. This term is defined and implemented in the frequency domain by translating the energy functional into the frequency domain and obtaining the Euler-Lagrange equations which minimize it. The new regularization term leads to a simple formulation and design, being applicable to higher dimensions by using the corresponding multidimensional Fourier transform. The proposed regularization term allows for a real gradual transition from a diffusion registration to a curvature registration which is best suited to some applications and it is not possible in the spatial domain. Results with 3D actual images show the validity of this approach.
Obregón, O; Ryan, M P; Obregon, Octavio; Quevedo, Hernando; Ryan, Michael P.
2004-01-01
We construct a family of time and angular dependent, regular S-brane solutions which corresponds to a simple analytical continuation of the Zipoy-Voorhees 4-dimensional vacuum spacetime. The solutions are asymptotically flat and turn out to be free of singularities without requiring a twist in space. They can be considered as the simplest non-singular generalization of the singular S0-brane solution. We analyze the properties of a representative of this family of solutions and show that it resembles to some extent the asymptotic properties of the regular Kerr S-brane. The R-symmetry corresponds, however, to the general Lorentzian symmetry. Several generalizations of this regular solution are derived which include a charged S-brane and an additional dilatonic field.
Landweber iterative regularization for nearfield acoustic holography
BI Chuanxing; CHEN Xinzhao; ZHOU Rong; CHEN Jian
2006-01-01
On the basis of the distributed source boundary point method (DSBPM)-based nearfield acoustic holography (NAH), Landweber iterative regularization method is proposed to stabilize the NAH reconstruction process, control the influence of measurement errors on the reconstructed results and ensure the validity of the reconstructed results. And a new method, the auxiliary surface method, is proposed to determine the optimal iterative number for optimizing the regularization effect. Here, the optimal number is determined by minimizing the relative error between the calculated pressure on the auxiliary surface corresponding to each iterative number and the measured pressure. An experiment on a speaker is investigated to demonstrate the high sensitivity of the reconstructed results to measurement errors and to validate the chosen method of the optimal iterative number and the Landweber iterative regularization method for controlling the influence of measurement errors on the reconstructed results.
Robust super-resolution without regularization
Pham, T Q [Canon Information Systems Research Australia, 1 Thomas Holt drive, North Ryde, NSW 2113 (Australia); Vliet, L J v [Quantitative Imaging Group, Department of Imaging Science and Technology, Faculty of Applied Sciences, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands); Schutte, K [Electro-Optics Group, TNO Defence, Security and Safety, PO Box 96864, 2509 JG The Hague (Netherlands)
2008-07-15
Super-resolution restoration is the problem of restoring a high-resolution scene from multiple degraded low-resolution images under motion. Due to imaging blur and noise, this problem is ill-posed. Additional constraints such as smoothness of the solution (i.e. regularization) is often required to obtain a stable solution. While regularizing the cost function is a standard practice in image restoration, we propose a restoration algorithm that does not require this extra regularization term. The robustness of the algorithm is achieved by a robust error norm that does not response to intensity outliers. With the outliers suppressed, our solution behaves similarly to a maximum-likelihood solution under the presence of Gaussian noise. The effectiveness of our algorithm is demonstrated with super-resolution restoration of real infrared image sequences under severe aliasing and intensity outliers.
Implementing regularization implicitly via approximate eigenvector computation
Mahoney, Michael W
2010-01-01
Regularization is a powerful technique for extracting useful information from noisy data. Typically, it is implemented by adding some sort of norm constraint to an objective function and then exactly optimizing the modified objective function. This procedure typically leads to optimization problems that are computationally more expensive than the original problem, a fact that is clearly problematic if one is interested in large-scale applications. On the other hand, a large body of empirical work has demonstrated that heuristics, and in some cases approximation algorithms, developed to speed up computations sometimes have the side-effect of performing regularization implicitly. Thus, we consider the question: What is the regularized optimization objective that an approximation algorithm is exactly optimizing? We address this question in the context of computing approximations to the smallest nontrivial eigenvector of a graph Laplacian; and we consider three random-walk-based procedures: one based on the heat ...
Nonlinear electrodynamics and regular black holes
Sajadi, S. N.; Riazi, N.
2017-03-01
In this work, an exact regular black hole solution in General Relativity is presented. The source is a nonlinear electromagnetic field with the algebraic structure T00=T11 for the energy-momentum tensor, partially satisfying the weak energy condition but not the strong energy condition. In the weak field limit, the EM field behaves like the Maxwell field. The solution corresponds to a charged black hole with q≤0.77 m. The metric, the curvature invariants, and the electric field are regular everywhere. The BH is stable against small perturbations of spacetime and using the Weinhold metric, geometrothermodynamical stability has been investigated. Finally we investigate the idea that the observable universe lives inside a regular black hole. We argue that this picture might provide a viable description of universe.
Regularization and Migration Policy in Europe
Philippe de Bruycker
2001-05-01
Full Text Available The following pages present, in a general way, the contents of Regularization of illegal immigrants in the European Union, which includes a comparative synthesis and statistical information for each of the eight countries involved; a description of actions since the beginning of the year 2000; and a systematic analysis of the different categories of foreigners, the types of regularization carried out, and the rules that have governed these actions.In relation to regularization, the author considers the political coherence of the actions taken by the member states as well as how they relate to two ever more crucial aspects of immigration policy –the integration of legal resident immigrants and the fight againstillegal immigration in the context of a control of migratory flows.
Width Distributions for Convex Regular Polyhedra
Finch, Steven R
2011-01-01
The mean width is a measure on three-dimensional convex bodies that enjoys equal status with volume and surface area [Rota]. As the phrase suggests, it is the mean of a probability density f. We verify formulas for mean widths of the regular tetrahedron and the cube. Higher-order moments of f_tetra and f_cube have not been examined until now. Assume that each polyhedron has edges of unit length. We deduce that the mean square width of the regular tetrahedron is 1/3+(3+sqrt(3))/(3*pi) and the mean square width of the cube is 1+4/pi.
Stability Analysis for Regularized Least Squares Regression
Rudin, Cynthia
2005-01-01
We discuss stability for a class of learning algorithms with respect to noisy labels. The algorithms we consider are for regression, and they involve the minimization of regularized risk functionals, such as L(f) := 1/N sum_i (f(x_i)-y_i)^2+ lambda ||f||_H^2. We shall call the algorithm `stable' if, when y_i is a noisy version of f*(x_i) for some function f* in H, the output of the algorithm converges to f* as the regularization term and noise simultaneously vanish. We consider two flavors of...
Interaction of Regular and Chaotic States
De Pace, A; Weidenmüller, H A
2006-01-01
Modelling the chaotic states in terms of the Gaussian Orthogonal Ensemble of random matrices (GOE), we investigate the interaction of the GOE with regular bound states. The eigenvalues of the latter may or may not be embedded in the GOE spectrum. We derive a generalized form of the Pastur equation for the average Green's function. We use that equation to study the average and the variance of the shift of the regular states, their spreading width, and the deformation of the GOE spectrum non-perturbatively. We compare our results with various perturbative approaches.
Regular transport dynamics produce chaotic travel times.
Villalobos, Jorge; Muñoz, Víctor; Rogan, José; Zarama, Roberto; Johnson, Neil F; Toledo, Benjamín; Valdivia, Juan Alejandro
2014-06-01
In the hope of making passenger travel times shorter and more reliable, many cities are introducing dedicated bus lanes (e.g., Bogota, London, Miami). Here we show that chaotic travel times are actually a natural consequence of individual bus function, and hence of public transport systems more generally, i.e., chaotic dynamics emerge even when the route is empty and straight, stops and lights are equidistant and regular, and loading times are negligible. More generally, our findings provide a novel example of chaotic dynamics emerging from a single object following Newton's laws of motion in a regularized one-dimensional system.
No finite $5$-regular matchstick graph exists
2014-01-01
A graph $G=(V,E)$ is called a unit-distance graph in the plane if there is an injective embedding of $V$ in the plane such that every pair of adjacent vertices are at unit distance apart. If additionally the corresponding edges are non-crossing and all vertices have the same degree $r$ we talk of a regular matchstick graph. Due to Euler's polyhedron formula we have $r\\le 5$. The smallest known $4$-regular matchstick graph is the so called Harborth graph consisting of $52$ vertices. In this ar...
Learning Rates for -Regularized Kernel Classifiers
Hongzhi Tong
2013-01-01
Full Text Available We consider a family of classification algorithms generated from a regularization kernel scheme associated with -regularizer and convex loss function. Our main purpose is to provide an explicit convergence rate for the excess misclassification error of the produced classifiers. The error decomposition includes approximation error, hypothesis error, and sample error. We apply some novel techniques to estimate the hypothesis error and sample error. Learning rates are eventually derived under some assumptions on the kernel, the input space, the marginal distribution, and the approximation error.
Estrada, Ernesto; de la Pena, Jose A.
2013-01-01
Let G be a graph with set of vertices 1,...,n and adjacency matrix A of size nxn. Let d(i,j)=d, we say that f_d:N->N is a d-function on G if for every pair of vertices i,j and k>=d, we have a_ij^(k)=f_d(k). If this function f_d exists on G we say that G is d-walk regular. We prove that G is d-walk regular if and only if for every pair of vertices i,j at distance
Astronaut Franklin Chang-Diaz organizes shuttle mail message
1994-01-01
On Discovery's aft flight deck, Astronaut Franklin R. Chang-Diaz begins to organize what was believed to be among the longest mail messages in Shuttle history. Though early Shuttle flights could brag of longer teleprinted messages, the Thermal Imaging Printing Systems's day four correspondence, most of which is out of frame here, is a record length for recent flights.
Time-resolved vibrational spectroscopy of a molecular shuttle
Panman, M.R.; Bodis, P.; Shaw, D.J.; Bakker, B.H.; Newton, A.C.; Kay, E.R.; Leigh, D.A.; Buma, W.J.; Brouwer, A.M.; Woutersen, S.
2012-01-01
Time-resolved vibrational spectroscopy is used to investigate the inter-component motion of an ultraviolet-triggered two-station molecular shuttle. The operation cycle of this molecular shuttle involves several intermediate species, which are observable in the amide I and amide II regions of the mid
Shuttle Orbiter Enterprise Off-Loaded at Redstone Arsenal Airfield
1978-01-01
The Shuttle Orbiter Enterprise is off-loaded Redstone Arsenal Airfield for later Mated Vertical Ground Vibration tests (MVGVT) at Marshall Space Flight Center's Dynamic Test Stand. The tests marked the first time ever that the entire shuttle complement (including orbiter, external tank, and solid rocket boosters) were mated vertically.
Shuttle Orbiter Enterprise Arrives at Redstone Arsenal Airfield
1978-01-01
The Shuttle Orbiter Enterprise atop a 747 landing at Redstone Arsenal Airfield for later Mated Vertical Ground Vibration tests (MVGVT) at Marshall Space Flight Center's Dynamic Test Stand. The tests marked the first time ever that the entire shuttle complement (including orbiter, external tank, and solid rocket boosters) were mated vertically.
Time management displays for shuttle countdown
Beller, Arthur E.; Hadaller, H. Greg; Ricci, Mark J.
1992-01-01
The Intelligent Launch Decision Support System project is developing a Time Management System (TMS) for the NASA Test Director (NTD) to use for time management during Shuttle terminal countdown. TMS is being developed in three phases: an information phase; a tool phase; and an advisor phase. The information phase is an integrated display (TMID) of firing room clocks, of graphic timelines with Ground Launch Sequencer events, and of constraints. The tool phase is a what-if spreadsheet (TMWI) for devising plans for resuming from unplanned hold situations. It is tied to information in TMID, propagates constraints forward and backward to complete unspecified values, and checks the plan against constraints. The advisor phase is a situation advisor (TMSA), which proactively suggests tactics. A concept prototype for TMSA is under development. The TMID is currently undergoing field testing. Displays for TMID and TMWI are described. Descriptions include organization, rationale for organization, implementation choices and constraints, and use by NTD.
Optimal guidance for the space shuttle transition
Stengel, R. F.
1974-01-01
A guidance method for the space shuttle's transition from hypersonic entry to subsonic cruising flight is presented. The method evolves from a numerical trajectory optimization technique in which kinetic energy and total energy (per unit weight) replace velocity and time in the dynamic equations. This allows the open end-time problem to be transformed to one of fixed terminal energy. In its ultimate form, E-Guidance obtains energy balance (including dynamic-pressure-rate damping) and path length control by angle-of-attack modulation and cross-range control by roll angle modulation. The guidance functions also form the basis for a pilot display of instantaneous maneuver limits and destination. Numerical results illustrate the E-Guidance concept and the optimal trajectories on which it is based.
Energy management during the space shuttle transition
Stengel, R. F.
1972-01-01
An approach to calculating optimal, gliding flight paths of the type associated with the space shuttle's transition from entry to cruising flight is presented. Kinetic energy and total energy (per unit weight) replace velocity and time in the dynamic equations, reducing the dimension and complexity of the problem. The capability for treating integral and terminal penalties (as well as Mach number effects) is retained in the numerical optimization; hence, stability and control boundaries can be observed as trajectories to the desired final energy, flight path angle, and range are determined. Numerical results show that the jump to the front-side of the L/D curve need not be made until the end of the transition and that the dynamic model provides a conservative range estimate. Alternatives for real time trajectory control are discussed.
Radar error statistics for the space shuttle
Lear, W. M.
1979-01-01
Radar error statistics of C-band and S-band that are recommended for use with the groundtracking programs to process space shuttle tracking data are presented. The statistics are divided into two parts: bias error statistics, using the subscript B, and high frequency error statistics, using the subscript q. Bias errors may be slowly varying to constant. High frequency random errors (noise) are rapidly varying and may or may not be correlated from sample to sample. Bias errors were mainly due to hardware defects and to errors in correction for atmospheric refraction effects. High frequency noise was mainly due to hardware and due to atmospheric scintillation. Three types of atmospheric scintillation were identified: horizontal, vertical, and line of sight. This was the first time that horizontal and line of sight scintillations were identified.
Dynamics of gradient formation by intracellular shuttling
Berezhkovskii, Alexander M. [Mathematical and Statistical Computing Laboratory, Division of Computational Bioscience, Center for Information Technology, National Institutes of Health, Bethesda, Maryland 20892 (United States); Shvartsman, Stanislav Y. [Department of Chemical and Biological Engineering and Lewis-Sigler Institute for Integrative Genomics, Princeton University, Princeton, New Jersey 08544 (United States)
2015-08-21
A number of important cellular functions rely on the formation of intracellular protein concentration gradients. Experimental studies discovered a number of mechanisms for the formation of such gradients. One of the mechanisms relies on the intracellular shuttling of a protein that interconverts between the two states with different diffusivities, under the action of two enzymes, one of which is localized to the plasma membrane, whereas the second is uniformly distributed in the cytoplasm. Recent work reported an analytical solution for the steady state gradient in this mechanism, obtained in the framework of a one-dimensional reaction-diffusion model. Here, we study the dynamics in this model and derive analytical expressions for the Laplace transforms of the time-dependent concentration profiles in terms of elementary transcendental functions. Inverting these transforms numerically, one can obtain time-dependent concentration profiles of the two forms of the protein.
Space shuttle crew training at CERN
Paola Catapano
From 13 to 16 October, the crew of NASA Space Shuttle mission STS-134 came to CERN for a special physics training programme. Invited here by Samuel Ting, they will deliver the Alpha Magnetic Spectrometer (AMS) detector to the International Space Station (ISS). The STS134 crew in the Lodge at the Aiguille du Midi wearing CERN fleeces. From left to right: Captain Mark Kelly, US Navy; Pilot Gregory Johnson, USAF ret.; Mission Specialist Andrew Feustel; Mission Specialist Mike Fincke, USAF, Mission Specialist Gregory Chamitoff and Mission Specialist Roberto Vittori, ESA and Italian Air Force. Headed by Commander Mark Kelly, a US Navy captain, the crew included pilot Gregory Johnson, a US Air Force (USAF) colonel, and mission specialists Mike Fincke (also a USAF Colonel), Andrew Feustel, and Gregory Chamitoff of NASA, as well as Colonel Roberto Vittori of the European Space Agency (ESA). Two flight directors, Gary Horlache and Derek Hassmann of NASA, and the engineer responsible for the Ext...
Dynamics of gradient formation by intracellular shuttling
Berezhkovskii, Alexander M.; Shvartsman, Stanislav Y.
2015-08-01
A number of important cellular functions rely on the formation of intracellular protein concentration gradients. Experimental studies discovered a number of mechanisms for the formation of such gradients. One of the mechanisms relies on the intracellular shuttling of a protein that interconverts between the two states with different diffusivities, under the action of two enzymes, one of which is localized to the plasma membrane, whereas the second is uniformly distributed in the cytoplasm. Recent work reported an analytical solution for the steady state gradient in this mechanism, obtained in the framework of a one-dimensional reaction-diffusion model. Here, we study the dynamics in this model and derive analytical expressions for the Laplace transforms of the time-dependent concentration profiles in terms of elementary transcendental functions. Inverting these transforms numerically, one can obtain time-dependent concentration profiles of the two forms of the protein.
Potential improvements to the Shuttle through evolution
Faget, Maxime A.; Smith, O. G.
1993-01-01
A possible series of evolutionary changes in the Space Shuttle are discussed that would increase both safety and performance while simultaneously decreasing the cost of operations. It is argued that major savings in operations costs can be achieved by employing electromechanical actuators in the hydraulic system and by making an architectural change to isolate the critical flight control processing system from other hardware. Minor modifications to existing Orbiters would enable the system to carry about 8000-10,000 more pounds to any given orbit. A more powerful, more reliable, and completely reusable booster should be developed, and reliability and safety improvements should be made. The SSMEs should be removed from the Orbiter and installed in a recoverable pod that would be attached to the rear of the ET.
Notch sensitivity of space shuttle tile materials
Newman, J. C., Jr.
1980-01-01
Tests were conducted at room temperature to determine the notch sensitivity of the thermal protection tile for the space shuttle. Two types of RSI tile were studied: LI-900 and LI-2200. Three point bend specimens were cut from discarded tiles in the in-plane (ip) and through-the-thickness (ttt) directions. They were tested with or without a sharp notch. The LI-900 (ip and ttt) specimens were not very notch sensitive, but the LI-2200 (ip and ttt) specimens were. The LI-2200 material showed about a 35 percent reduction in strength due to the presence of the notch. This reduction in strength should be considered in the design of mechanically fastened tile concepts.
The Legacy of Space Shuttle Flight Software
Hickey, Christopher J.; Loveall, James B.; Orr, James K.; Klausman, Andrew L.
2011-01-01
The initial goals of the Space Shuttle Program required that the avionics and software systems blaze new trails in advancing avionics system technology. Many of the requirements placed on avionics and software were accomplished for the first time on this program. Examples include comprehensive digital fly-by-wire technology, use of a digital databus for flight critical functions, fail operational/fail safe requirements, complex automated redundancy management, and the use of a high-order software language for flight software development. In order to meet the operational and safety goals of the program, the Space Shuttle software had to be extremely high quality, reliable, robust, reconfigurable and maintainable. To achieve this, the software development team evolved a software process focused on continuous process improvement and defect elimination that consistently produced highly predictable and top quality results, providing software managers the confidence needed to sign each Certificate of Flight Readiness (COFR). This process, which has been appraised at Capability Maturity Model (CMM)/Capability Maturity Model Integration (CMMI) Level 5, has resulted in one of the lowest software defect rates in the industry. This paper will present an overview of the evolution of the Primary Avionics Software System (PASS) project and processes over thirty years, an argument for strong statistical control of software processes with examples, an overview of the success story for identifying and driving out errors before flight, a case study of the few significant software issues and how they were either identified before flight or slipped through the process onto a flight vehicle, and identification of the valuable lessons learned over the life of the project.
Use of Probabilistic Risk Assessment in Shuttle Decision Making Process
Boyer, Roger L.; Hamlin, Teri, L.
2011-01-01
This slide presentation reviews the use of Probabilistic Risk Assessment (PRA) to assist in the decision making for the shuttle design and operation. Probabilistic Risk Assessment (PRA) is a comprehensive, structured, and disciplined approach to identifying and analyzing risk in complex systems and/or processes that seeks answers to three basic questions: (i.e., what can go wrong? what is the likelihood of these occurring? and what are the consequences that could result if these occur?) The purpose of the Shuttle PRA (SPRA) is to provide a useful risk management tool for the Space Shuttle Program (SSP) to identify strengths and possible weaknesses in the Shuttle design and operation. SPRA was initially developed to support upgrade decisions, but has evolved into a tool that supports Flight Readiness Reviews (FRR) and near real-time flight decisions. Examples of the use of PRA for the shuttle are reviewed.
Hamlin, Teri L.
2011-01-01
It is important to the Space Shuttle Program (SSP), as well as future manned spaceflight programs, to understand the early mission risk and progression of risk as the program gains insights into the integrated vehicle through flight. The risk progression is important to the SSP as part of the documentation of lessons learned. The risk progression is important to future programs to understand reliability growth and the first flight risk. This analysis uses the knowledge gained from 30 years of operational flights and the current Shuttle PRA to calculate the risk of Loss of Crew and Vehicle (LOCV) at significant milestones beginning with the first flight. Key flights were evaluated based upon historical events and significant re-designs. The results indicated that the Shuttle risk tends to follow a step function as opposed to following a traditional reliability growth pattern where risk exponentially improves with each flight. In addition, it shows that risk can increase due to trading safety margin for increased performance or due to external events. Due to the risk drivers not being addressed, the risk did not improve appreciably during the first 25 flights. It was only after significant events occurred such as Challenger and Columbia, where the risk drivers were apparent, that risk was significantly improved. In addition, this paper will show that the SSP has reduced the risk of LOCV by almost an order of magnitude. It is easy to look back afte r 30 years and point to risks that are now obvious, however; the key is to use this knowledge to benefit other programs which are in their infancy stages. One lesson learned from the SSP is understanding risk drivers are essential in order to considerably reduce risk. This will enable the new program to focus time and resources on identifying and reducing the significant risks. A comprehensive PRA, similar to that of the Shuttle PRA, is an effective tool quantifying risk drivers if support from all of the stakeholders is
Green, B. David; Yates, G. Kenneth; Ahmadjian, Mark; Miranda, Henry
1987-01-01
The Particle Analysis Cameras for Shuttle (PACS) Experiment was flown on Mission STS61C (Columbia) in January 1986. This experiment involved a pair of cameras in a stereo viewing configuration and an associated strobe light flash to permit particle observation during the entire orbit. Although only one camera functioned properly, significant trends and particle counts were still obtained from the film data. We report here the preliminary analysis and conclusions from that mission.
Dynamic stabilization of regular linear systems
Weiss, G; Curtain, RF
We consider a general class of infinite-dimensional linear systems, called regular linear systems, for which convenient representations are known to exist both in time and in frequency domain, For this class of systems, we investigate the concepts of stabilizability and detectability, in particular,
Regular and context-free nominal traces
Mezzetti, Gianluca
2016-01-01
Two kinds of automata are presented, for recognising new classes of regular and context-free nominal languages. We compare their expressive power with analogous proposals in the literature, showing that they express novel classes of languages. Although many properties of classical languages hold ...
Neural Classifier Construction using Regularization, Pruning
Hintz-Madsen, Mads; Hansen, Lars Kai; Larsen, Jan;
1998-01-01
In this paper we propose a method for construction of feed-forward neural classifiers based on regularization and adaptive architectures. Using a penalized maximum likelihood scheme, we derive a modified form of the entropic error measure and an algebraic estimate of the test error. In conjunction...
Deconvolution and Regularization with Toeplitz Matrices
Hansen, Per Christian
2002-01-01
of these discretized deconvolution problems, with emphasis on methods that take the special structure of the matrix into account. Wherever possible, analogies to classical DFT-based deconvolution problems are drawn. Among other things, we present direct methods for regularization with Toeplitz matrices, and we show...
The moduli space of regular stable maps
Robbin, Joel; Salamon, Dietmar; 10.1007/s00209-007-0237-x
2012-01-01
The moduli space of regular stable maps with values in a complex manifold admits naturally the structure of a complex orbifold. Our proof uses the methods of differential geometry rather than algebraic geometry. It is based on Hardy decompositions and Fredholm intersection theory in the loop space of the target manifold.
Regular conformal system for Einstein equations
Choquet-Bruhat, Y.; Novello, M.
1987-06-21
We give a system of partial differential equations satisfied by a metric g conformal to an Einstein metric and by the conformal factor ..omega.., regular system in the sense that it does not contain negative powers of ..omega... We use the ideas of Friedrich but we obtain here a hyperbolic system in the sense of Leray, by a different method.
Optimal Regularizing Effect for Scalar Conservation Laws
Golse, François
2011-01-01
We investigate the regularity of bounded weak solutions of scalar conservation laws with uniformly convex flux in space dimension one, satisfying an entropy condition with entropy production term that is a signed Radon measure. The proof is based on the kinetic formulation of scalar conservation laws and on an interaction estimate in physical space.
Bayesian regularization of diffusion tensor images
Frandsen, Jesper; Hobolth, Asger; Østergaard, Leif;
2007-01-01
several directions. The measured diffusion coefficients and thereby the diffusion tensors are subject to noise, leading to possibly flawed representations of the three dimensional fibre bundles. In this paper we develop a Bayesian procedure for regularizing the diffusion tensor field, fully utilizing...
Regularity of rotational travelling water waves.
Escher, Joachim
2012-04-13
Several recent results on the regularity of streamlines beneath a rotational travelling wave, along with the wave profile itself, will be discussed. The survey includes the classical water wave problem in both finite and infinite depth, capillary waves and solitary waves as well. A common assumption in all models to be discussed is the absence of stagnation points.
Contour Propagation With Riemannian Elasticity Regularization
Bjerre, Troels; Hansen, Mads Fogtmann; Sapru, W.;
2011-01-01
the planning CT onto the rescans and correcting to reflect actual anatomical changes. For deformable registration, a free-form, multi-level, B-spline deformation model with Riemannian elasticity, penalizing non-rigid local deformations, and volumetric changes, was used. Regularization parameters was defined...
NOTE ON REGULAR D-OPTIMAL MATRICES
李乔良
2003-01-01
Let A be aj ×d (0,1) matrix. It is known that ifj = 2k-1is odd, then det(AAT) ≤(j+1)((j+1)d/4j)j; ifj is even, then det(AAT) ≤ (j+1)((j+2)d/4(j+1))j. A is called a regularD-optimal matrix if it satisfies the equality of the above bounds. In this note, it is proved thatifj = 2k - 1 is odd, then A is a regular D-optimal matrix if and only if A is the adjacent matrixof a (2k - 1, k, (j + 1)d/4j)-BIBD; if j ＝ 2k is even, then A is a regular D-optimal matrix ifand only if A can be obtained from the adjacent matrix B of a (2k + 1, k + 1, (j + 2)d/4(j + 1))-BIBD by deleting any one row from B. Three 21 × 42 regular D-optimal matrices, which wereunknown in [11], are also provided.
A Note on Left Regular Semiring
N. Sulochana
2016-08-01
Full Text Available In this paper we have focused on the additive and multiplicative identity „e‟ and determine the additive and multiplicative semigroups. Here we established that, A semiring S in which (S, + and (S, • are left singular semigroups, then S is a left regular semiring. We have framed an example for this proposition by considering a two element set
Tikhonov Regularization and Total Least Squares
Golub, G. H.; Hansen, Per Christian; O'Leary, D. P.
2000-01-01
formulation involves a least squares problem, can be recast in a total least squares formulation suited for problems in which both the coefficient matrix and the right-hand side are known only approximately. We analyze the regularizing properties of this method and demonstrate by a numerical example that...
Creativity Workshops in the Regular Classroom.
Mildrum, Nancy King
2000-01-01
This article describes implementation of a creativity curriculum, Ten Lessons in Creativity, with gifted and typical students in elementary and middle school settings. It discusses creativity instruction as a bridge between gifted and regular education, ways that creativity workshops affirm the highly creative child, creativity and self-esteem,…
Regularization of turbulence - a comprehensive modeling approach
Geurts, B. J.
2011-12-01
Turbulence readily arises in numerous flows in nature and technology. The large number of degrees of freedom of turbulence poses serious challenges to numerical approaches aimed at simulating and controlling such flows. While the Navier-Stokes equations are commonly accepted to precisely describe fluid turbulence, alternative coarsened descriptions need to be developed to cope with the wide range of length and time scales. These coarsened descriptions are known as large-eddy simulations in which one aims to capture only the primary features of a flow, at considerably reduced computational effort. Such coarsening introduces a closure problem that requires additional phenomenological modeling. A systematic approach to the closure problem, know as regularization modeling, will be reviewed. Its application to multiphase turbulent will be illustrated in which a basic regularization principle is enforced to physically consistently approximate momentum and scalar transport. Examples of Leray and LANS-alpha regularization are discussed in some detail, as are compatible numerical strategies. We illustrate regularization modeling to turbulence under the influence of rotation and buoyancy and investigate the accuracy with which particle-laden flow can be represented. A discussion of the numerical and modeling errors incurred will be given on the basis of homogeneous isotropic turbulence.
Coprime factorization for regular linear systems
Curtain, R; Weiss, G; Weiss, M
1996-01-01
Mild sufficient conditions are given for the existence of a doubly coprime factorization of the transfer function of a regular linear system, as well as formulae for such a factorization. The results are illustrated by two examples of delay systems, one of which has infinitely many unstable poles. C
Dynamic stabilization of regular linear systems
Weiss, G; Curtain, RF
1997-01-01
We consider a general class of infinite-dimensional linear systems, called regular linear systems, for which convenient representations are known to exist both in time and in frequency domain, For this class of systems, we investigate the concepts of stabilizability and detectability, in particular,
Annotation of regular polysemy and underspecification
Martínez Alonso, Héctor; Pedersen, Bolette Sandford; Bel, Núria
2013-01-01
We present the result of an annotation task on regular polysemy for a series of seman- tic classes or dot types in English, Dan- ish and Spanish. This article describes the annotation process, the results in terms of inter-encoder agreement, and the sense distributions obtained with two methods...
Strategies of Teachers in the Regular Classroom
De Leeuw, Renske Ria; De Boer, Anke Aaltje
2016-01-01
It is known that regular schoolteachers have difficulties in educating students with social, emotional and behavioral difficulties (SEBD), mainly because of their disruptive behavior. In order to manage the disruptive behavior of students with SEBD many advices and strategies are provided in educational literature. However, very little is known…
Strategies of teachers in the regular classroom
de Leeuw, Renske Ria; de Boer, Anke Aaltje
2016-01-01
It is known that regular schoolteachers have difficulties in educating students with social, emotional and behavioral difficulties (SEBD), mainly because of their disruptive behavior. In order to manage the disruptive behavior of students with SEBD many advices and strategies are provided in educati
On the regularity in some variational problems
Ragusa, Maria Alessandra; Tachikawa, Atsushi
2017-01-01
Our main goal is the study some regularity results where are considered estimates in Morrey spaces for the derivatives of local minimizers of variational integrals of the form 𝒜 (u ,Ω )= ∫Ω F (x ,u ,D u ) dx where Ω is a bounded domain in ℝm and the integrand F have some different forms.
Regular-fat dairy and human health
Astrup, Arne; Bradley, Beth H Rice; Brenna, J Thomas;
2016-01-01
to disseminate, explore and discuss the state of the science on the relationship between regular fat dairy products and health, symposia were programmed by dairy industry organizations in Europe and North America at The Eurofed Lipids Congress (2014) in France, The Dairy Nutrition Annual Symposium (2014...
Regular Submanifolds in Conformal Space Qnp
Changxiong NIE; Chuanxi WU
2012-01-01
The authors study the regular submanifolds in the conformal space Qnp and introduce the submanifold theory in the conformal space Qnp.The first variation formula of the Willmore volume functional of pseudo-Riemannian submanifolds in the conformal space Qnp is given.Finally,the conformal isotropic submanifolds in the conformal space Qnp are classified.
On the regularization procedure in classical electrodynamics
Yaremko, Yu
2003-01-01
We consider the self-action problem in classical electrodynamics. A strict geometrical sense of commonly used renormalization of mass is made. A regularization procedure is proposed which relies on energy-momentum and angular momentum balance equations. We correct the expression for angular momentum tensor obtained by us in a previous paper (2002 J. Phys. A: Math. Gen. 35 831).
The canonical controller and its regularity
Willems, Jan C.; Belur, Madhu N.; Anak Agung Julius, A.A.J.; Trentelman, Harry L.
2003-01-01
This paper deals with properties of canonical controllers. We first specify the behavior that they implement. It follows that a canonical controller implements the desired controlled behavior if and only if the desired behavior is implementable. We subsequently investigate the regularity of the cont
Stabilization, Pole Placement, and Regular Implementability
Belur, Madhu N.; Trentelman, H.L.
2002-01-01
In this paper, we study control by interconnection of linear differential systems. We give necessary and sufficient conditions for regular implementability of a given linear differential system. We formulate the problems of stabilization and pole placement as problems of finding a suitable, regularl
Generalisation of Regular and Irregular Morphological Patterns.
Prasada, Sandeep; and Pinker, Steven
1993-01-01
When it comes to explaining English verbs' patterns of regular and irregular generalization, single-network theories have difficulty with the former, rule-only theories with the latter process. Linguistic and psycholinguistic evidence, based on observation during experiments and simulations in morphological pattern generation, independently call…
Liu, Jinzhen; Ling, Lin; Li, Gang
2013-07-01
A Tikhonov regularization method in the inverse problem of electrical impedance tomography (EIT) often results in a smooth distribution reconstruction, with which we can barely make a clear separation between the inclusions and background. The recently popular total variation (TV)regularization method including the lagged diffusivity (LD) method can sharpen the edges, and is robust to noise in a small convergence region. Therefore, in this paper, we propose a novel regularization method combining the Tikhonov and LD regularization methods. Firstly, we clarify the implementation details of the Tikhonov, LD and combined methods in two-dimensional open EIT by performing the current injection and voltage measurement on one boundary of the imaging object. Next, we introduce a weighted parameter to the Tikhonov regularization method aiming to explore the effect of the weighted parameter on the resolution and quality of reconstruction images with the inclusion at different depths. Then, we analyze the performance of these algorithms with noisy data. Finally, we evaluate the effect of the current injection pattern on reconstruction quality and propose a modified current injection pattern.The results indicate that the combined regularization algorithm with stable convergence is able to improve the reconstruction quality with sharp contrast and more robust to noise in comparison to the Tikhonov and LD regularization methods solely. In addition, the results show that the current injection pattern with a bigger driver angle leads to a better reconstruction quality.
Huvila, Isto; Daniels, Mats; Cajander, Åsa; Åhlfeldt, Rose-Mharie
2016-01-01
Introduction: We report results of a study of how ordering and reading of printouts of medical records by regular and inexperienced readers relate to how the records are used, to the health information practices of patients, and to their expectations of the usefulness of new e-Health services and online access to medical records. Method: The study…
ZHANG; Xiaoxia; GUO; Maozheng
2005-01-01
In this paper, it is shown that the regular representation and regular covariant representation of the crossed products A×α G correspond to the twisted multiplicative unitary operators, where A is a Woronowicz C*-algebra acted upon by a discrete group G. Meanwhile, it is also shown that the regular covariant C*-algebra is the Woronowicz C*-algebra which corresponds to a multiplicative unitary. Finally, an explicit description of the multiplicative unitary operator for C(SUq(2))×α Z is given in terms of those of the Woronowicz C*-algebra C(SUq(2)) and the discrete group G.
Nucleocytoplasmic shuttling activity of ataxin-3.
Sandra Macedo-Ribeiro
Full Text Available Spinocerebellar ataxia type-3, also known as Machado-Joseph Disease (MJD, is one of many inherited neurodegenerative disorders caused by polyglutamine-encoding CAG repeat expansions in otherwise unrelated genes. Disease protein misfolding and aggregation, often within the nucleus of affected neurons, characterize polyglutamine disorders. Several evidences have implicated the nucleus as the primary site of pathogenesis for MJD. However, the molecular determinants for the nucleocytoplasmic transport of human ataxin-3 (Atx3, the protein which is mutated in patients with MJD, are not characterized. In order to characterize the nuclear shuttling activity of Atx3, we performed yeast nuclear import assays and found that Atx3 is actively imported into the nucleus, by means of a classical nuclear localizing sequence formed by a cluster of lysine and arginine residues. On the other hand, when active nuclear export was inhibited using leptomycin B, a specific inhibitor of the nuclear export receptor CRM1, both endogenous Atx3 and transfected GFP-Atx3 accumulated inside the nucleus of a subpopulation of COS-7 cells, whereas both proteins are normally predominant in the cytoplasm. Additionally, using a Rev(1.4-GFP nuclear export assay, we performed an extensive analysis of six putative aliphatic nuclear export motifs identified in Atx3 amino acid sequence. Although none of the tested peptide sequences were found to drive nuclear export when isolated, we have successfully mapped the region of Atx3 responsible for its CRM1-independent nuclear export activity. Curiously, the N-terminal Josephin domain alone is exported into the cytoplasm, but the nuclear export activity of Atx3 is significantly enhanced in a longer construct that is truncated after the two ubiquitin interaction motifs, upstream from the polyQ tract. Our data show that Atx3 is actively imported to and exported from the cell nucleus, and that its nuclear export activity is dependent on a motif
7 CFR 3550.151 - Servicing goals.
2010-01-01
... 7 Agriculture 15 2010-01-01 2010-01-01 false Servicing goals. 3550.151 Section 3550.151 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, DEPARTMENT OF AGRICULTURE DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS Regular Servicing § 3550.151 Servicing goals....
Intelligent hypertext manual development for the Space Shuttle hazardous gas detection system
Lo, Ching F.; Hoyt, W. Andes
1989-01-01
This research is designed to utilize artificial intelligence (AI) technology to increase the efficiency of personnel involved with monitoring the space shuttle hazardous gas detection systems at the Marshall Space Flight Center. The objective is to create a computerized service manual in the form of a hypertext and expert system which stores experts' knowledge and experience. The resulting Intelligent Manual will assist the user in interpreting data timely, in identifying possible faults, in locating the applicable documentation efficiently, in training inexperienced personnel effectively, and updating the manual frequently as required.
Regularization and Iterative Methods for Monotone Variational Inequalities
Xiubin Xu
2010-01-01
Full Text Available We provide a general regularization method for monotone variational inequalities, where the regularizer is a Lipschitz continuous and strongly monotone operator. We also introduce an iterative method as discretization of the regularization method. We prove that both regularization and iterative methods converge in norm.
Power-law regularities in human language
Mehri, Ali; Lashkari, Sahar Mohammadpour
2016-11-01
Complex structure of human language enables us to exchange very complicated information. This communication system obeys some common nonlinear statistical regularities. We investigate four important long-range features of human language. We perform our calculations for adopted works of seven famous litterateurs. Zipf's law and Heaps' law, which imply well-known power-law behaviors, are established in human language, showing a qualitative inverse relation with each other. Furthermore, the informational content associated with the words ordering, is measured by using an entropic metric. We also calculate fractal dimension of words in the text by using box counting method. The fractal dimension of each word, that is a positive value less than or equal to one, exhibits its spatial distribution in the text. Generally, we can claim that the Human language follows the mentioned power-law regularities. Power-law relations imply the existence of long-range correlations between the word types, to convey an especial idea.
Towards lattice-regularized Quantum Gravity
Diakonov, Dmitri
2011-01-01
Using the Cartan formulation of General Relativity, we construct a well defined lattice-regularized theory capable to describe large non-perturbative quantum fluctuations of the frame field (or the metric) and of the spin connection. To that end we need to present the tetrad by a composite field built as a bilinear combination of fermion fields. The theory is explicitly invariant under local Lorentz transformations and, in the continuum limit, under general covariant transformations, or diffeomorphisms. Being well defined for large and fast varying fields at the ultraviolet cutoff, the theory simultaneously has chances of reproducing standard General Relativity in the infrared continuum limit. The present regularization of quantum gravity opens new possibilities of its unification with the Standard Model.
Basic analysis of regularized series and products
Jorgenson, Jay A
1993-01-01
Analytic number theory and part of the spectral theory of operators (differential, pseudo-differential, elliptic, etc.) are being merged under amore general analytic theory of regularized products of certain sequences satisfying a few basic axioms. The most basic examples consist of the sequence of natural numbers, the sequence of zeros with positive imaginary part of the Riemann zeta function, and the sequence of eigenvalues, say of a positive Laplacian on a compact or certain cases of non-compact manifolds. The resulting theory is applicable to ergodic theory and dynamical systems; to the zeta and L-functions of number theory or representation theory and modular forms; to Selberg-like zeta functions; andto the theory of regularized determinants familiar in physics and other parts of mathematics. Aside from presenting a systematic account of widely scattered results, the theory also provides new results. One part of the theory deals with complex analytic properties, and another part deals with Fourier analys...
Extreme values, regular variation and point processes
Resnick, Sidney I
1987-01-01
Extremes Values, Regular Variation and Point Processes is a readable and efficient account of the fundamental mathematical and stochastic process techniques needed to study the behavior of extreme values of phenomena based on independent and identically distributed random variables and vectors It presents a coherent treatment of the distributional and sample path fundamental properties of extremes and records It emphasizes the core primacy of three topics necessary for understanding extremes the analytical theory of regularly varying functions; the probabilistic theory of point processes and random measures; and the link to asymptotic distribution approximations provided by the theory of weak convergence of probability measures in metric spaces The book is self-contained and requires an introductory measure-theoretic course in probability as a prerequisite Almost all sections have an extensive list of exercises which extend developments in the text, offer alternate approaches, test mastery and provide for enj...
Tracking magnetogram proper motions by multiscale regularization
Jones, Harrison P.
1995-01-01
Long uninterrupted sequences of solar magnetograms from the global oscillations network group (GONG) network and from the solar and heliospheric observatory (SOHO) satellite will provide the opportunity to study the proper motions of magnetic features. The possible use of multiscale regularization, a scale-recursive estimation technique which begins with a prior model of how state variables and their statistical properties propagate over scale. Short magnetogram sequences are analyzed with the multiscale regularization algorithm as applied to optical flow. This algorithm is found to be efficient, provides results for all the spatial scales spanned by the data and provides error estimates for the solutions. It is found that the algorithm is less sensitive to evolutionary changes than correlation tracking.
Chiral Perturbation Theory With Lattice Regularization
Ouimet, P P A
2005-01-01
In this work, alternative methods to regularize chiral perturbation theory are discussed. First, Long Distance Regularization will be considered in the presence of the decuplet of the lightest spin 32 baryons for several different observables. This serves motivation and introduction to the use of the lattice regulator for chiral perturbation theory. The mesonic, baryonic and anomalous sectors of chiral perturbation theory will be formulated on a lattice of space time points. The consistency of the lattice as a regulator will be discussed in the context of the meson and baryon masses. Order a effects will also be discussed for the baryon masses, sigma terms and magnetic moments. The work will close with an attempt to derive an effective Wess-Zumino-Witten Lagrangian for Wilson fermions at non-zero a. Following this discussion, there will be a proposal for a phenomenologically useful WZW Lagrangian at non-zero a.
Testing the Equivalence of Regular Languages
Marco Almeida
2009-07-01
Full Text Available The minimal deterministic finite automaton is generally used to determine regular languages equality. Antimirov and Mosses proposed a rewrite system for deciding regular expressions equivalence of which Almeida et al. presented an improved variant. Hopcroft and Karp proposed an almost linear algorithm for testing the equivalence of two deterministic finite automata that avoids minimisation. In this paper we improve the best-case running time, present an extension of this algorithm to non-deterministic finite automata, and establish a relationship between this algorithm and the one proposed in Almeida et al. We also present some experimental comparative results. All these algorithms are closely related with the recent coalgebraic approach to automata proposed by Rutten.
Least square regularized regression in sum space.
Xu, Yong-Li; Chen, Di-Rong; Li, Han-Xiong; Liu, Lu
2013-04-01
This paper proposes a least square regularized regression algorithm in sum space of reproducing kernel Hilbert spaces (RKHSs) for nonflat function approximation, and obtains the solution of the algorithm by solving a system of linear equations. This algorithm can approximate the low- and high-frequency component of the target function with large and small scale kernels, respectively. The convergence and learning rate are analyzed. We measure the complexity of the sum space by its covering number and demonstrate that the covering number can be bounded by the product of the covering numbers of basic RKHSs. For sum space of RKHSs with Gaussian kernels, by choosing appropriate parameters, we tradeoff the sample error and regularization error, and obtain a polynomial learning rate, which is better than that in any single RKHS. The utility of this method is illustrated with two simulated data sets and five real-life databases.
Effort variation regularization in sound field reproduction
Stefanakis, Nick; Jacobsen, Finn; Sarris, Ioannis
2010-01-01
. Specifically, it is suggested that the phase differential of the source driving signals should be in agreement with the phase differential of the desired sound pressure field. The performance of the suggested method is compared with that of conventional effort regularization, wave field synthesis (WFS......In this paper, active control is used in order to reproduce a given sound field in an extended spatial region. A method is proposed which minimizes the reproduction error at a number of control positions with the reproduction sources holding a certain relation within their complex strengths......), and adaptive wave field synthesis (AWFS), both under free-field conditions and in reverberant rooms. It is shown that effort variation regularization overcomes the problems associated with small spaces and with a low ratio of direct to reverberant energy, improving thus the reproduction accuracy...
Totally Corrective Boosting for Regularized Risk Minimization
Shen, Chunhua; Barnes, Nick
2010-01-01
Consideration of the primal and dual problems together leads to important new insights into the characteristics of boosting algorithms. In this work, we propose a general framework that can be used to design new boosting algorithms. A wide variety of machine learning problems essentially minimize a regularized risk functional. We show that the proposed boosting framework, termed CGBoost, can accommodate various loss functions and different regularizers in a totally-corrective optimization fashion. We show that, by solving the primal rather than the dual, a large body of totally-corrective boosting algorithms can actually be efficiently solved and no sophisticated convex optimization solvers are needed. We also demonstrate that some boosting algorithms like AdaBoost can be interpreted in our framework--even their optimization is not totally corrective. We empirically show that various boosting algorithms based on the proposed framework perform similarly on the UCIrvine machine learning datasets [1] that we hav...
Development of a prototype specialist shuttle vehicle for chipped woodfuel
NONE
2003-06-01
This report gives details of a project to develop and test a specialist chip shuttle vehicle for conveying woodchips out of the forest with the aim of reducing the cost of woodfuel production. The design objectives are described and include the need to allow easy transfer of the chips from the chipper to the shuttle and on into haulage units, good performance and manoeuvrability on and off roads, and high-tip capacity. Estimates of the improved production and reduced woodfuel production costs are discussed along with the anticipated satisfactory operation of the chipper-shuttle combination in a forestry site.
NASA Shuttle Logistics Depot (NSLD) - The application of ATE
Simpkins, Lorenz G.; Jenkins, Henry C.; Mauceri, A. Jack
1990-01-01
The concept of the NASA Shuttle Logistics Depot (NSLD) developed for the Space Shuttle Orbiter Program is described. The function of the NSLD at Cape Canaveral is to perform the acceptance and diagnostic testing of the Shuttle's space-rated line-replaceable units and shop-replaceable units (SRUs). The NSLD includes a comprehensive electronic automatic test station, program development stations, and assorted manufacturing support equipment (including thermal and vibration test equipment, special test equipment, and a card SRU test system). The depot activities also include the establishment of the functions for manufacturing of mechanical parts, soldering, welding, painting, clean room operation, procurement, and subcontract management.
Effect of periodic inflow on speed-controlled shuttle bus
Nagatani, Takashi
2017-03-01
We investigate the dynamic behavior of a shuttle bus controlled the speed when passengers come periodically at the origin. We propose the nonlinear-map model for the dynamics of the speed-controlled bus with the periodic inflow. The bus schedule is closely connected to the motion. The motion of the speed-controlled bus is affected by the periodic inflow. The motion of the shuttle bus depends highly on both speed control and periodic inflow. The shuttle bus displays the periodic, quasi-periodic, and chaotic motions by varying both periodic inflow and speed control. We clarify the dependence of the bus motion on both speed control and periodic inflow.
Shuttle operations simulation model programmers'/users' manual
Porter, D. G.
1972-01-01
The prospective user of the shuttle operations simulation (SOS) model is given sufficient information to enable him to perform simulation studies of the space shuttle launch-to-launch operations cycle. The procedures used for modifying the SOS model to meet user requirements are described. The various control card sequences required to execute the SOS model are given. The report is written for users with varying computer simulation experience. A description of the components of the SOS model is included that presents both an explanation of the logic involved in the simulation of the shuttle operations cycle and a description of the routines used to support the actual simulation.
A survey of load methodologies for shuttle orbiter payloads
Chen, J. C.; Garba, J. A.; Salama, M.; Trubert, M.
1981-01-01
Loads methods currently being used to design planetary spacecraft to be launched on the shuttle orbiter are summarized. Experiences gained from expendable launch vehicle payloads are used to develop methodologies for the space shuttle orbiter payloads. The objectives for the development of a new methodology for the shuttle payloads are to reduce the cost and schedule for the payload load analysis by decoupling the payload analysis from the launch vehicle to the maximum extent possible. Methods are described for payload member load estimation or obtaining upper bounds for dynamic loads, as well as load prediction or calculating actual transient member load time histories.
Regular black hole in three dimensions
Myung, Yun Soo; Yoon, Myungseok
2008-01-01
We find a new black hole in three dimensional anti-de Sitter space by introducing an anisotropic perfect fluid inspired by the noncommutative black hole. This is a regular black hole with two horizons. We compare thermodynamics of this black hole with that of non-rotating BTZ black hole. The first-law of thermodynamics is not compatible with the Bekenstein-Hawking entropy.
A short proof of increased parabolic regularity
Stephen Pankavich
2015-08-01
Full Text Available We present a short proof of the increased regularity obtained by solutions to uniformly parabolic partial differential equations. Though this setting is fairly introductory, our new method of proof, which uses a priori estimates and an inductive method, can be extended to prove analogous results for problems with time-dependent coefficients, advection-diffusion or reaction diffusion equations, and nonlinear PDEs even when other tools, such as semigroup methods or the use of explicit fundamental solutions, are unavailable.
Regular aspirin use and lung cancer risk
Cummings K
2002-11-01
Full Text Available Abstract Background Although a large number of epidemiological studies have examined the role of aspirin in the chemoprevention of colon cancer and other solid tumors, there is a limited body of research focusing on the association between aspirin and lung cancer risk. Methods We conducted a hospital-based case-control study to evaluate the role of regular aspirin use in lung cancer etiology. Study participants included 868 cases with primary, incident lung cancer and 935 hospital controls with non-neoplastic conditions who completed a comprehensive epidemiological questionnaire. Participants were classified as regular aspirin users if they had taken the drug at least once a week for at least one year. Results Results indicated that lung cancer risk was significantly lower for aspirin users compared to non-users (adjusted OR = 0.57; 95% CI 0.41–0.78. Although there was no clear evidence of a dose-response relationship, we observed risk reductions associated with greater frequency of use. Similarly, prolonged duration of use and increasing tablet years (tablets per day × years of use was associated with reduced lung cancer risk. Risk reductions were observed in both sexes, but significant dose response relationships were only seen among male participants. When the analyses were restricted to former and current smokers, participants with the lowest cigarette exposure tended to benefit most from the potential chemopreventive effect of aspirin. After stratification by histology, regular aspirin use was significantly associated with reduced risk of small cell lung cancer and non-small cell lung cancer. Conclusions Overall, results from this hospital-based case-control study suggest that regular aspirin use may be associated with reduced risk of lung cancer.
Bouncing cosmology inspired by regular black holes
Neves, J. C. S.
2017-09-01
In this article, we present a bouncing cosmology inspired by a family of regular black holes. This scale-dependent cosmology deviates from the cosmological principle by means of a scale factor which depends on the time and the radial coordinate as well. The model is isotropic but not perfectly homogeneous. That is, this cosmology describes a universe almost homogeneous only for large scales, such as our observable universe.
Regular black hole in three dimensions
Myung, Yun Soo; Yoon, Myungseok
2008-01-01
We find a new black hole in three dimensional anti-de Sitter space by introducing an anisotropic perfect fluid inspired by the noncommutative black hole. This is a regular black hole with two horizons. We compare thermodynamics of this black hole with that of non-rotating BTZ black hole. The first-law of thermodynamics is not compatible with the Bekenstein-Hawking entropy.
Stream Processing Using Grammars and Regular Expressions
Rasmussen, Ulrik Terp
Kleenex, a language for expressing high-performance streaming string processing programs as regular grammars with embedded semantic actions, and its compilation to streaming string transducers with worst-case linear-time performance. Its underlying theory is based on transducer decomposition into oracle...... is based on a bottom-up tabulation algorithm reformulated using least fixed points and evaluated using an instance of the chaotic iteration scheme by Cousot and Cousot....
Sparse regularization for force identification using dictionaries
Qiao, Baijie; Zhang, Xingwu; Wang, Chenxi; Zhang, Hang; Chen, Xuefeng
2016-04-01
The classical function expansion method based on minimizing l2-norm of the response residual employs various basis functions to represent the unknown force. Its difficulty lies in determining the optimum number of basis functions. Considering the sparsity of force in the time domain or in other basis space, we develop a general sparse regularization method based on minimizing l1-norm of the coefficient vector of basis functions. The number of basis functions is adaptively determined by minimizing the number of nonzero components in the coefficient vector during the sparse regularization process. First, according to the profile of the unknown force, the dictionary composed of basis functions is determined. Second, a sparsity convex optimization model for force identification is constructed. Third, given the transfer function and the operational response, Sparse reconstruction by separable approximation (SpaRSA) is developed to solve the sparse regularization problem of force identification. Finally, experiments including identification of impact and harmonic forces are conducted on a cantilever thin plate structure to illustrate the effectiveness and applicability of SpaRSA. Besides the Dirac dictionary, other three sparse dictionaries including Db6 wavelets, Sym4 wavelets and cubic B-spline functions can also accurately identify both the single and double impact forces from highly noisy responses in a sparse representation frame. The discrete cosine functions can also successfully reconstruct the harmonic forces including the sinusoidal, square and triangular forces. Conversely, the traditional Tikhonov regularization method with the L-curve criterion fails to identify both the impact and harmonic forces in these cases.
Computational Topology for Regular Closed Sets
project, The I-TANGO; :; Peters, T J; Bisceglio, J.; Ferguson, D. R.; Hoffmann, C.M.; Maekawa, T.; Patrikalakis, N.M.; Sakkalis, T.; N F Stewart
2004-01-01
The Boolean algebra of regular closed sets is prominent in topology, particularly as a dual for the Stone-Cech compactification. This algebra is also central for the theory of geometric computation, as a representation for combinatorial operations on geometric sets. However, the issue of computational approximation introduces unresolved subtleties that do not occur within "pure" topology. One major effort towards reconciling this mathematical theory with computational practice is our ongoing ...
Hyperspectral Image Recovery via Hybrid Regularization
Arablouei, Reza; de Hoog, Frank
2016-12-01
Natural images tend to mostly consist of smooth regions with individual pixels having highly correlated spectra. This information can be exploited to recover hyperspectral images of natural scenes from their incomplete and noisy measurements. To perform the recovery while taking full advantage of the prior knowledge, we formulate a composite cost function containing a square-error data-fitting term and two distinct regularization terms pertaining to spatial and spectral domains. The regularization for the spatial domain is the sum of total-variation of the image frames corresponding to all spectral bands. The regularization for the spectral domain is the l1-norm of the coefficient matrix obtained by applying a suitable sparsifying transform to the spectra of the pixels. We use an accelerated proximal-subgradient method to minimize the formulated cost function. We analyze the performance of the proposed algorithm and prove its convergence. Numerical simulations using real hyperspectral images exhibit that the proposed algorithm offers an excellent recovery performance with a number of measurements that is only a small fraction of the hyperspectral image data size. Simulation results also show that the proposed algorithm significantly outperforms an accelerated proximal-gradient algorithm that solves the classical basis-pursuit denoising problem to recover the hyperspectral image.
Charge-regularization effects on polyelectrolytes
Muthukumar, Murugappan
2012-02-01
When electrically charged macromolecules are dispersed in polar solvents, their effective net charge is generally different from their chemical charges, due to competition between counterion adsorption and the translational entropy of dissociated counterions. The effective charge changes significantly as the experimental conditions change such as variations in solvent quality, temperature, and the concentration of added small electrolytes. This charge-regularization effect leads to major difficulties in interpreting experimental data on polyelectrolyte solutions and challenges in understanding the various polyelectrolyte phenomena. Even the most fundamental issue of experimental determination of molar mass of charged macromolecules by light scattering method has been difficult so far due to this feature. We will present a theory of charge-regularization of flexible polyelectrolytes in solutions and discuss the consequences of charge-regularization on (a) experimental determination of molar mass of polyelectrolytes using scattering techniques, (b) coil-globule transition, (c) macrophase separation in polyelectrolyte solutions, (c) phase behavior in coacervate formation, and (d) volume phase transitions in polyelectrolyte gels.
Regularization Parameter Selections via Generalized Information Criterion.
Zhang, Yiyun; Li, Runze; Tsai, Chih-Ling
2010-03-01
We apply the nonconcave penalized likelihood approach to obtain variable selections as well as shrinkage estimators. This approach relies heavily on the choice of regularization parameter, which controls the model complexity. In this paper, we propose employing the generalized information criterion (GIC), encompassing the commonly used Akaike information criterion (AIC) and Bayesian information criterion (BIC), for selecting the regularization parameter. Our proposal makes a connection between the classical variable selection criteria and the regularization parameter selections for the nonconcave penalized likelihood approaches. We show that the BIC-type selector enables identification of the true model consistently, and the resulting estimator possesses the oracle property in the terminology of Fan and Li (2001). In contrast, however, the AIC-type selector tends to overfit with positive probability. We further show that the AIC-type selector is asymptotically loss efficient, while the BIC-type selector is not. Our simulation results confirm these theoretical findings, and an empirical example is presented. Some technical proofs are given in the online supplementary material.
Longitudinal dynamic stability of a shuttle vehicle.
Vinh, N. X.; Laitone, E. V.
1972-01-01
Analytical study of the longitudinal dynamic stability of a nonrolling, lifting vehicle gliding at hypersonic speeds. The analysis applies to shuttle vehicles designed for operating up to the rim of a planetary atmosphere. A general nondimensional time transformation is introduced to derive a unified second-order linear differential equation for the angle of attack, valid for all types of reentry of a general type of vehicle. The stability of motion is discussed for two fundamental regimes of flight that are based on widely different assumptions. For near ballistic entry along a straight line trajectory, the equation reduces to a confluent hypergeometric equation, the solution of which can be expressed in terms of Whittaker's function. Using a theorem in the theory of stability of differential equations, criteria for damped oscillations are derived. It is shown that the aerodynamic criteria for stability are the same as for the case of ballistic entry. In addition, for each vehicle configuration, and specified planetary atmosphere, there exists an altitude range where the angle of attack frequency is nearly equal to the orbital frequency causing instability in pitch. This resonance instability is due to the ellipticity of the orbit. Criteria for eccentricity instability are derived.
1975-01-01
A cryogenic H2-O2 auxiliary power unit (APU) was developed and successfully demonstrated. It has potential application as a minimum weight alternate to the space shuttle baseline APU because of its (1) low specific propellant consumption and (2) heat sink capabilities that reduce the amount of expendable evaporants. A reference system was designed with the necessary heat exchangers, combustor, turbine-gearbox, valves, and electronic controls to provide 400 shp to two aircraft hydraulic pumps. Development testing was carried out first on the combustor and control valves. This was followed by development of the control subsystem including the controller, the hydrogen and oxygen control valves, the combustor, and a turbine simulator. The complete APU system was hot tested for 10 hr with ambient and cryogenic propellants. Demonstrated at 95 percent of design power was 2.25 lb/hp-hr. At 10 percent design power, specific propellant consumption was 4 lb/hp-hr with space simulated exhaust and 5.2 lb/hp-hr with ambient exhaust. A 10 percent specific propellant consumption improvement is possible with some seal modifications. It was demonstrated that APU power levels could be changed by several hundred horsepower in less than 100 msec without exceeding allowable turbine inlet temperatures or turbine speed.
Presenting the Shuttle Main Engine Software
Schreur, Barbara
1998-01-01
Originally, this project was to produce an animated Powerpoint presentation of the 'Shuttle Engine and its Software' and to produce a web page with animation including the same materials but with greater detail in the description of the software. The principal emphasis was to be on the web page. Midway through the first year of the project, we were advised by the technical coordinator of this work at MSFC to concentrate on the web page alone. Also, the project was expanded to include a web presentation of the MRECS (Modular Rocket Control System). For the SSME project, the web page presentation has been completed. The integration of the animation into the web page is complete although we have been asked to speed up the animation. Also, the addition of greater detail to the description of the SSME controller software has been added. Much of the work on this program was done by students as their task for their senior project course, the capstone course of their program of study. The students gained a great deal from this project. They have learned to use VISIO, POWERPOINT, PHOTOSHOP, and several web page software packages. The starting point for this project was a PowerPoint presentation by the PI while on a Summer Faculty Fellowship at MSFC. For this project, about half of the drawings of the SSME were improved and about half were completely redrawn. The original still drawings have been animated to illustrate the fuel flow through the SSME system.
Space shuttle SRM field joint: Review paper
S. Mohammad Gharouni
2014-09-01
Full Text Available Due to Challenger space shuttle accident in 1986, significant research has been done concerning structural behavior of field joints in solid rocket boosters (SRB. The structural deformations between the clevis inner leg and the tang (male-to-female parts of joint, the sealing of the O-ring to prevent the hot gas in joints, has been neglected causing the failure of the vehicle. Redesigning the field joint in SRB engine by accurate analysis of dynamic and thermal loads and by design of insulator and good O-ring, the leakiness of combustion hot gases was eliminated. Some parts of field joint such as capture feature (CF and its third O-ring, J-leg insulator and shim were added to redesigned field joint. Also, some adjustments in sealing system and pins were done to promote the efficiency of the field joint. Due to different experimental analysis on assembled field joints with default imperfections, redesigned joints operated well. These redesigned field joints are commonly used in aerospace and mechanical structures. This paper investigates the original and the redesigned field joints with additional explanations of different parts of the redesigned joints.
Space Alignment Based on Regularized Inversion Precoding in Cognitive Transmission
R. Yao
2015-09-01
Full Text Available For a two-tier Multiple-Input Multiple-Output (MIMO cognitive network with common receiver, the precoding matrix has a compact relationship with the capacity performance in the unlicensed secondary system. To increase the capacity of secondary system, an improved precoder based on the idea of regularized inversion for secondary transmitter is proposed. An iterative space alignment algorithm is also presented to ensure the Quality of Service (QoS for primary system. The simulations reveal that, on the premise of achieving QoS for primary system, our proposed algorithm can get larger capacity in secondary system at low Signal-to-Noise Ratio (SNR, which proves the effectiveness of the algorithm.
Yildiz, Cemil; ABBAS, Fadhil
2011-01-01
The concepts of fuzzy regular-I-closed set and fuzzy semi-I-regular set in fuzzy ideal topological spaces are investigated and some of their properties are obtained. Key words: Topological, Spaces, Fuzzy, Regular, Sets
Shuttle program. MCC level C formulation requirements: Shuttle TAEM guidance and flight control
Carman, G. L.
1980-01-01
The Level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are defined. This processor will be used for preentry evaluation of the entry through landing maneuvers, and will include a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.
Shuttle Electrical Power Analysis Program (SEPAP) distribution circuit analysis report
Torina, E. M.
1975-01-01
An analysis and evaluation was made of the operating parameters of the shuttle electrical power distribution circuit under load conditions encountered during a normal Sortie 2 Mission with emphasis on main periods of liftoff and landing.
Time-resolved vibrational spectroscopy of a molecular shuttle.
Panman, Matthijs R; Bodis, Pavol; Shaw, Danny J; Bakker, Bert H; Newton, Arthur C; Kay, Euan R; Leigh, David A; Buma, Wybren Jan; Brouwer, Albert M; Woutersen, Sander
2012-02-14
Time-resolved vibrational spectroscopy is used to investigate the inter-component motion of an ultraviolet-triggered two-station molecular shuttle. The operation cycle of this molecular shuttle involves several intermediate species, which are observable in the amide I and amide II regions of the mid-IR spectrum. Using ab initio calculations on specific parts of the rotaxane, and by comparing the transient spectra of the normal rotaxane with that of the N-deuterated version, we can assign the observed vibrational modes of each species occurring during the shuttling cycle in an unambiguous way. The complete time- and frequency-dependent data set is analyzed using singular value decomposition (SVD). Using a kinetic model to describe the time-dependent concentrations of the transient species, we derive the absorption spectra associated with each stage in the operation cycle of the molecular shuttle, including the recombination of the charged species.
Shuttle entry guidance revisited using nonlinear geometric methods
Mease, Kenneth D.; Kremer, Jean-Paul
1994-11-01
The entry guidance law for the space shuttle orbiter is revisited using nonlinear geometric methods. The shuttle guidance concept is to track a reference drag trajectory that has been designed to lead a specified range and velocity. It is shown that the approach taken in the original derivation of the shuttle entry guidance has much in common with the more recently developed feedback linearization method of differential geometric control. Using the feedback linearization method, however, an alternative, potentially superior, guidance law was formulated. Comparing the two guidance laws based performance domains in state space, taking into account the nonlinear dynamics, the alternative guidance law achieves the desired performance over larger domains in state space; the stability domain of the laws are similar. With larger operating domain for the shuttle or some other entry vehicle, the alternative guidance law should be considered.
Space Shuttle processing - A case study in artificial intelligence
Mollikarimi, Cindy; Gargan, Robert; Zweben, Monte
1991-01-01
A scheduling system incorporating AI is described and applied to the automated processing of the Space Shuttle. The unique problem of addressing the temporal, resource, and orbiter-configuration requirements of shuttle processing is described with comparisons to traditional project management for manufacturing processes. The present scheduling system is developed to handle the late inputs and complex programs that characterize shuttle processing by incorporating fixed preemptive scheduling, constraint-based simulated annealing, and the characteristics of an 'anytime' algorithm. The Space-Shuttle processing environment is modeled with 500 activities broken down into 4000 subtasks and with 1600 temporal constraints, 8000 resource constraints, and 3900 state requirements. The algorithm is shown to scale to very large problems and maintain anytime characteristics suggesting that an automated scheduling process is achievable and potentially cost-effective.
Space Shuttle Main Propulsion System Anomaly Detection: A Case Study
National Aeronautics and Space Administration — The space shuttle main engine (SSME) is part of the Main Propnlsion System (MPS) which is an extremely complex system containing several sub-systems and components,...
Space shuttle recommendations based on aircraft maintenance experience
Spears, J. M.; Fox, C. L.
1972-01-01
Space shuttle design recommendations based on aircraft maintenance experience are developed. The recommendations are specifically applied to the landing gear system, nondestructive inspection techniques, hydraulic system design, materials and processes, and program support.
Astronaut Judith Resnik in the Shuttle mission simulator
1984-01-01
Astronaut Judith A. Resnik, 41-D mission specialist, prepares to climb some steps leading to the flight deck portion of JSC's Shuttle mission simulator (SMS) in preparation for training for her 41-D mission.
Shuttle sonic boom - Technology and predictions. [environmental impact
Holloway, P. F.; Wilhold, G. A.; Jones, J. H.; Garcia, F., Jr.; Hicks, R. M.
1973-01-01
Because the shuttle differs significantly in both geometric and operational characteristics from conventional supersonic aircraft, estimation of sonic boom characteristics required a new technology base. The prediction procedures thus developed are reviewed. Flight measurements obtained for both the ascent and entry phases of the Apollo 15 and 16 and for the ascent phase only of the Apollo 17 missions are presented which verify the techniques established for application to shuttle. Results of extensive analysis of the sonic boom overpressure characteristics completed to date are presented which indicate that this factor of the shuttle's environmental impact is predictable, localized, of short duration and acceptable. Efforts are continuing to define the shuttle sonic boom characteristics to a fine level of detail based on the final system design.
Gas Pressure Measurements on Space Shuttle Mission-39.
2007-11-02
there have been numerous in-situ experiments designed to measure the gaseous contamination near the Shuttle [Green et al., 1985; Erlers et al., 1984...engines [ Erlers , 1984; Machuzak et al., 1993; Hunton, 19941. Engine-related pressure spikes were investigated by Narcisi et al. [19831, Wulf and von Zahn...Government Printing Office, Washington D.C., 1976. Erlers , H.K.F., S. Jacobs, L. Leger, and E. Miller (1984) Space Shuttle contamination measurements from
Exodus - Distributed artificial intelligence for Shuttle firing rooms
Heard, Astrid E.
1990-01-01
This paper describes the Expert System for Operations Distributed Users (EXODUS), a knowledge-based artificial intelligence system developed for the four Firing Rooms at the Kennedy Space Center. EXODUS is used by the Shuttle engineers and test conductors to monitor and control the sequence of tasks required for processing and launching Shuttle vehicles. In this paper, attention is given to the goals and the design of EXODUS, the operational requirements, and the extensibility of the technology.
Smart drugs: green shuttle or real drug?
Cornara, L; Borghesi, B; Canali, C; Andrenacci, M; Basso, M; Federici, S; Labra, M
2013-11-01
We have combined morphological, molecular, and chemical techniques in order to identify the plant and chemical composition of some last-generation smart drugs, present on the market under the following names: Jungle Mistic Incense, B-52, Blendz, and Kratom 10x. Micromorphological analyses of botanical fragments allowed identification of epidermal cells, stomata, trichomes, starch, crystals, and pollen. DNA barcoding was carried out by the plastidial gene rbcL and the spacer trnH-psbA as universal markers. The combination of morphological and molecular data revealed a mixture of plants from different families, including aromatic species, viz., Lamiaceae and Turneraceae. GC-MS and LC-MS analyses on ethanol or methanol extracts showed the presence of synthetic cannabinoids, including JWH-250 in Jungle, JWH-122 in B-52, and JWH-073 and JWH-018 in Blendz. In Kratom 10x, only the indole alkaloid mitragynine was detected. All the identified synthetic cannabinoids, apart from mitragynine, are under the restriction of law in Italy (TU 309/90). Synthetic cannabinoid crystals were also identified by scanning electron microscopy and energy dispersive X-ray spectroscopy, which also detected other foreign organic chemicals, probably preservatives or antimycotics. In Kratom only leaf fragments from Mitragyna speciosa, containing the alkaloid mitragynine, were found. In the remaining products, aromatic plant species have mainly the role of hiding synthetic cannabinoids, thus acting as a "green shuttle" rather than as real drugs. Such a multidisciplinary approach is proposed as a method for the identification of herbal blends of uncertain composition, which are widely marketed in "headshops" and on the Internet, and represent a serious hazard to public health.
Latent Virus Reactivation in Space Shuttle Astronauts
Mehta, S. K.; Crucian, B. E.; Stowe, R. P.; Sams, C.; Castro, V. A.; Pierson, D. L.
2011-01-01
Latent virus reactivation was measured in 17 astronauts (16 male and 1 female) before, during, and after short-duration Space Shuttle missions. Blood, urine, and saliva samples were collected 2-4 months before launch, 10 days before launch (L-10), 2-3 hours after landing (R+0), 3 days after landing (R+14), and 120 days after landing (R+120). Epstein-Barr virus (EBV) DNA was measured in these samples by quantitative polymerase chain reaction. Varicella-zoster virus (VZV) DNA was measured in the 381 saliva samples and cytomegalovirus (CMV) DNA in the 66 urine samples collected from these subjects. Fourteen astronauts shed EBV DNA in 21% of their saliva samples before, during, and after flight, and 7 astronauts shed VZV in 7.4% of their samples during and after flight. It was interesting that shedding of both EBV and VZV increased during the flight phase relative to before or after flight. In the case of CMV, 32% of urine samples from 8 subjects contained DNA of this virus. In normal healthy control subjects, EBV shedding was found in 3% and VZV and CMV were found in less than 1% of the samples. The circadian rhythm of salivary cortisol measured before, during, and after space flight did not show any significant difference between flight phases. These data show that increased reactivation of latent herpes viruses may be associated with decreased immune system function, which has been reported in earlier studies as well as in these same subjects (data not reported here).
Replication of Space-Shuttle Computers in FPGAs and ASICs
Ferguson, Roscoe C.
2008-01-01
A document discusses the replication of the functionality of the onboard space-shuttle general-purpose computers (GPCs) in field-programmable gate arrays (FPGAs) and application-specific integrated circuits (ASICs). The purpose of the replication effort is to enable utilization of proven space-shuttle flight software and software-development facilities to the extent possible during development of software for flight computers for a new generation of launch vehicles derived from the space shuttles. The replication involves specifying the instruction set of the central processing unit and the input/output processor (IOP) of the space-shuttle GPC in a hardware description language (HDL). The HDL is synthesized to form a "core" processor in an FPGA or, less preferably, in an ASIC. The core processor can be used to create a flight-control card to be inserted into a new avionics computer. The IOP of the GPC as implemented in the core processor could be designed to support data-bus protocols other than that of a multiplexer interface adapter (MIA) used in the space shuttle. Hence, a computer containing the core processor could be tailored to communicate via the space-shuttle GPC bus and/or one or more other buses.
Brand-new signage for the CERN shuttles
Roberto Cantoni
2010-01-01
If, after reading the title of this article, you're striving to remember what the signs for the CERN shuttles look like, then you just hit the nail on the head: we bet that only a few people can actually do so. In order to make it easier for CERN users to move around the CERN sites, a graphic restyling of the shuttle signage has been implemented. You will start to see the new timetables in the coming days. Larisa Kuchina, a graphic designer in the Communication Group, restyled the shuttle signage to make it more visible and intelligible. “I was inspired by the very clear and user friendly interface of the Geneva Public Transport system (TPG)”, explains Larisa. “Each timetable will also include the corresponding shuttle route. We will soon introduce new road signs for shuttle stops to make sure they are visible from a distance”. There are currently four shuttle lines, serving 28,000 passengers since February 2010: two of them operate between Meyrin and Pr...
Space Shuttle GN and C Development History and Evolution
Zimpfer, Douglas; Hattis, Phil; Ruppert, John; Gavert, Don
2011-01-01
Completion of the final Space Shuttle flight marks the end of a significant era in Human Spaceflight. Developed in the 1970 s, first launched in 1981, the Space Shuttle embodies many significant engineering achievements. One of these is the development and operation of the first extensive fly-by-wire human space transportation Guidance, Navigation and Control (GN&C) System. Development of the Space Shuttle GN&C represented first time inclusions of modern techniques for electronics, software, algorithms, systems and management in a complex system. Numerous technical design trades and lessons learned continue to drive current vehicle development. For example, the Space Shuttle GN&C system incorporated redundant systems, complex algorithms and flight software rigorously verified through integrated vehicle simulations and avionics integration testing techniques. Over the past thirty years, the Shuttle GN&C continued to go through a series of upgrades to improve safety, performance and to enable the complex flight operations required for assembly of the international space station. Upgrades to the GN&C ranged from the addition of nose wheel steering to modifications that extend capabilities to control of the large flexible configurations while being docked to the Space Station. This paper provides a history of the development and evolution of the Space Shuttle GN&C system. Emphasis is placed on key architecture decisions, design trades and the lessons learned for future complex space transportation system developments. Finally, some of the interesting flight operations experience is provided to inform future developers of flight experiences.
Dosimetry Service
2005-01-01
Please remember to read your dosimeter every month at least once and preferably during the first week. A regular read-out is indispensable in order to ensure a periodic monitoring of the personal dose. You should read your dosimeter even if you have not visited the controlled areas. If you still have the old dosimeter (film badge), please send it immediately for evaluation to us (Bdg 24 E-011). After January 2005 there will be no developing process for the old film system. Information for Contractors: Please remember also to bring the form âConfirm Reception of a CERN Dosimeter' signed with âFeuille d'enregistrement du CERN'. Without these forms the dosimeter cannot be assigned. Thank you for your cooperation. Dosimetry Service Tel 767 2155 http://cern.ch/rp-dosimetry
Convergence and fluctuations of Regularized Tyler estimators
Kammoun, Abla
2015-10-26
This article studies the behavior of regularized Tyler estimators (RTEs) of scatter matrices. The key advantages of these estimators are twofold. First, they guarantee by construction a good conditioning of the estimate and second, being a derivative of robust Tyler estimators, they inherit their robustness properties, notably their resilience to the presence of outliers. Nevertheless, one major problem that poses the use of RTEs in practice is represented by the question of setting the regularization parameter p. While a high value of p is likely to push all the eigenvalues away from zero, it comes at the cost of a larger bias with respect to the population covariance matrix. A deep understanding of the statistics of RTEs is essential to come up with appropriate choices for the regularization parameter. This is not an easy task and might be out of reach, unless one considers asymptotic regimes wherein the number of observations n and/or their size N increase together. First asymptotic results have recently been obtained under the assumption that N and n are large and commensurable. Interestingly, no results concerning the regime of n going to infinity with N fixed exist, even though the investigation of this assumption has usually predated the analysis of the most difficult N and n large case. This motivates our work. In particular, we prove in the present paper that the RTEs converge to a deterministic matrix when n → ∞ with N fixed, which is expressed as a function of the theoretical covariance matrix. We also derive the fluctuations of the RTEs around this deterministic matrix and establish that these fluctuations converge in distribution to a multivariate Gaussian distribution with zero mean and a covariance depending on the population covariance and the parameter.
Regular physical exercise: way to healthy life.
Siddiqui, N I; Nessa, A; Hossain, M A
2010-01-01
Any bodily activity or movement that enhances and maintains overall health and physical fitness is called physical exercise. Habit of regular physical exercise has got numerous benefits. Exercise is of various types such as aerobic exercise, anaerobic exercise and flexibility exercise. Aerobic exercise moves the large muscle groups with alternate contraction and relaxation, forces to deep breath, heart to pump more blood with adequate tissue oxygenation. It is also called cardiovascular exercise. Examples of aerobic exercise are walking, running, jogging, swimming etc. In anaerobic exercise, there is forceful contraction of muscle with stretching, usually mechanically aided and help to build up muscle strength and muscle bulk. Examples are weight lifting, pulling, pushing, sprinting etc. Flexibility exercise is one type of stretching exercise to improve the movements of muscles, joints and ligaments. Walking is a good example of aerobic exercise, easy to perform, safe, effective, does not require any training or equipment and less chance of injury. Regular 30 minutes brisk walking in the morning with 150 minutes per week is a good exercise. Regular exercise improves the cardiovascular status, reduces the risk of cardiac disease, high blood pressure and cerebrovascular disease. It reduces body weight, improves insulin sensitivity, helps in glycemic control, prevents obesity and diabetes mellitus. It is helpful for relieving anxiety, stress, brings a sense of well being and overall physical fitness. Global trend is mechanization, labor savings and leading to epidemic of long term chronic diseases like diabetes mellitus, cardiovascular diseases etc. All efforts should be made to create public awareness promoting physical activity, physically demanding recreational pursuits and providing adequate facilities.
Invariant Regularization of Supersymmetric Chiral Gauge Theory
Suzuki, H
1999-01-01
We present a regularization scheme which respects the supersymmetry and the maximal background gauge covariance in supersymmetric chiral gauge theories. When the anomaly cancellation condition is satisfied, the effective action in the superfield background field method automatically restores the gauge invariance without counterterms. The scheme also provides a background gauge covariant definition of composite operators that is especially useful in analyzing anomalies. We present several applications: The minimal consistent gauge anomaly; the super-chiral anomaly and the superconformal anomaly; as the corresponding anomalous commutators, the Konishi anomaly and an anomalous supersymmetric transformation law of the supercurrent (the ``central extension'' of N=1 supersymmetry algebra) and of the R-current.
Total-variation regularization with bound constraints
Chartrand, Rick [Los Alamos National Laboratory; Wohlberg, Brendt [Los Alamos National Laboratory
2009-01-01
We present a new algorithm for bound-constrained total-variation (TV) regularization that in comparison with its predecessors is simple, fast, and flexible. We use a splitting approach to decouple TV minimization from enforcing the constraints. Consequently, existing TV solvers can be employed with minimal alteration. This also makes the approach straightforward to generalize to any situation where TV can be applied. We consider deblurring of images with Gaussian or salt-and-pepper noise, as well as Abel inversion of radiographs with Poisson noise. We incorporate previous iterative reweighting algorithms to solve the TV portion.
Regularizing mappings of Lévy measures
Barndorff-Nielsen, Ole Eiler; Thorbjørnsen, Steen
2006-01-01
In this paper we introduce and study a regularizing one-to-one mapping from the class of one-dimensional Lévy measures into itself. This mapping appeared implicitly in our previous paper [O.E. Barndorff-Nielsen, S. Thorbjørnsen, A connection between free and classical infinite divisibility, Inf....... Dim. Anal. Quant. Probab. 7 (2004) 573–590], where we introduced a one-to-one mapping from the class of one-dimensional infinitely divisible probability measures into itself. Based on the investigation of in the present paper, we deduce further properties of . In particular it is proved that maps...
Multichannel image regularization using anisotropic geodesic filtering
Grazzini, Jacopo A [Los Alamos National Laboratory
2010-01-01
This paper extends a recent image-dependent regularization approach introduced in aiming at edge-preserving smoothing. For that purpose, geodesic distances equipped with a Riemannian metric need to be estimated in local neighbourhoods. By deriving an appropriate metric from the gradient structure tensor, the associated geodesic paths are constrained to follow salient features in images. Following, we design a generalized anisotropic geodesic filter; incorporating not only a measure of the edge strength, like in the original method, but also further directional information about the image structures. The proposed filter is particularly efficient at smoothing heterogeneous areas while preserving relevant structures in multichannel images.
Homology of powers of regular ideals
2003-01-01
For a commutative ring R with an ideal I, generated by a finite regular sequence, we construct differential graded algebras which provide R-free resolutions of I^s and of R/I^s for s>0 and which generalise the Koszul resolution. We derive these from a certain multiplicative double complex. By means of a Cartan-Eilenberg spectral sequence we express Tor_*^R(R/I,R/I^s) and Tor_*^R(R/I, I^s) in terms of exact sequences and find that they are free as R/I-modules. Except for R/I, their product str...
The regular state in higher order gravity
Cotsakis, Spiros; Kadry, Seifedine; Trachilis, Dimitrios
2016-08-01
We consider the higher-order gravity theory derived from the quadratic Lagrangian R + 𝜖R2 in vacuum as a first-order (ADM-type) system with constraints, and build time developments of solutions of an initial value formulation of the theory. We show that all such solutions, if analytic, contain the right number of free functions to qualify as general solutions of the theory. We further show that any regular analytic solution which satisfies the constraints and the evolution equations can be given in the form of an asymptotic formal power series expansion.
Regular collision of dilatonic inflating branes
Leeper, E; Maartens, R
2005-01-01
We demonstrate that a two brane system with a bulk scalar field driving power-law inflation on the branes has an instability in the radion. We solve for the resulting trajectory of the brane, and find that the instability can lead to collision. Brane quantities such as the scale factor are shown to be regular at this collision. In addition we describe the system using a low energy expansion. The low energy expansion accurately reproduces the known exact solution, but also identifies an alternative solution for the bulk metric and brane trajectory.
Limit cycle walking on a regularized ground
Jacobs, Henry O
2012-01-01
The singular nature of contact problems, such as walking, makes them difficult to analyze mathematically. In this paper we will "regularize" the contact problem of walking by approximating the ground with a smooth repulsive potential energy and a smooth dissipative friction force. Using this model we are able to prove the existence of a limit cycle for a periodically perturbed system which consists of three masses connected by springs. In particular, this limit cycle exists in a symmetry reduced phase. In the unreduced phase space, the motion of the masses resembles walking.
Two-pass greedy regular expression parsing
Grathwohl, Niels Bjørn Bugge; Henglein, Fritz; Nielsen, Lasse;
2013-01-01
We present new algorithms for producing greedy parses for regular expressions (REs) in a semi-streaming fashion. Our lean-log algorithm executes in time O(mn) for REs of size m and input strings of size n and outputs a compact bit-coded parse tree representation. It improves on previous algorithms......-based prototype indicates that the superior performance of our lean-log algorithm can also be observed in practice; it is also surprisingly competitive with RE tools not performing full parsing, such as Grep....
Accretion onto some well-known regular black holes
Jawad, Abdul; Shahzad, M.U. [COMSATS Institute of Information Technology, Department of Mathematics, Lahore (Pakistan)
2016-03-15
In this work, we discuss the accretion onto static spherically symmetric regular black holes for specific choices of the equation of state parameter. The underlying regular black holes are charged regular black holes using the Fermi-Dirac distribution, logistic distribution, nonlinear electrodynamics, respectively, and Kehagias-Sftesos asymptotically flat regular black holes. We obtain the critical radius, critical speed, and squared sound speed during the accretion process near the regular black holes. We also study the behavior of radial velocity, energy density, and the rate of change of the mass for each of the regular black holes. (orig.)
Accretion onto Some Well-Known Regular Black Holes
Jawad, Abdul
2016-01-01
In this work, we discuss the accretion onto static spherical symmetric regular black holes for specific choices of equation of state parameter. The underlying regular black holes are charged regular black hole using Fermi-Dirac Distribution, logistic distribution, nonlinear electrodynamics, respectively and Kehagias-Sftesos asymptotically flat regular black hole. We obtain the critical radius, critical speed and squared sound speed during the accretion process near the regular black holes. We also study the behavior of radial velocity, energy density and rate of change of mass for each regular black holes.
Multiple graph regularized nonnegative matrix factorization
Wang, Jim Jing-Yan
2013-10-01
Non-negative matrix factorization (NMF) has been widely used as a data representation method based on components. To overcome the disadvantage of NMF in failing to consider the manifold structure of a data set, graph regularized NMF (GrNMF) has been proposed by Cai et al. by constructing an affinity graph and searching for a matrix factorization that respects graph structure. Selecting a graph model and its corresponding parameters is critical for this strategy. This process is usually carried out by cross-validation or discrete grid search, which are time consuming and prone to overfitting. In this paper, we propose a GrNMF, called MultiGrNMF, in which the intrinsic manifold is approximated by a linear combination of several graphs with different models and parameters inspired by ensemble manifold regularization. Factorization metrics and linear combination coefficients of graphs are determined simultaneously within a unified object function. They are alternately optimized in an iterative algorithm, thus resulting in a novel data representation algorithm. Extensive experiments on a protein subcellular localization task and an Alzheimer\\'s disease diagnosis task demonstrate the effectiveness of the proposed algorithm. © 2013 Elsevier Ltd. All rights reserved.
Regularized Semiparametric Estimation for Ordinary Differential Equations.
Li, Yun; Zhu, Ji; Wang, Naisyin
2015-07-01
Ordinary differential equations (ODEs) are widely used in modeling dynamic systems and have ample applications in the fields of physics, engineering, economics and biological sciences. The ODE parameters often possess physiological meanings and can help scientists gain better understanding of the system. One key interest is thus to well estimate these parameters. Ideally, constant parameters are preferred due to their easy interpretation. In reality, however, constant parameters can be too restrictive such that even after incorporating error terms, there could still be unknown sources of disturbance that lead to poor agreement between observed data and the estimated ODE system. In this paper, we address this issue and accommodate short-term interferences by allowing parameters to vary with time. We propose a new regularized estimation procedure on the time-varying parameters of an ODE system so that these parameters could change with time during transitions but remain constants within stable stages. We found, through simulation studies, that the proposed method performs well and tends to have less variation in comparison to the non-regularized approach. On the theoretical front, we derive finite-sample estimation error bounds for the proposed method. Applications of the proposed method to modeling the hare-lynx relationship and the measles incidence dynamic in Ontario, Canada lead to satisfactory and meaningful results.
Tomographic laser absorption spectroscopy using Tikhonov regularization.
Guha, Avishek; Schoegl, Ingmar
2014-12-01
The application of tunable diode laser absorption spectroscopy (TDLAS) to flames with nonhomogeneous temperature and concentration fields is an area where only few studies exist. Experimental work explores the performance of tomographic reconstructions of species concentration and temperature profiles from wavelength-modulated TDLAS measurements within the plume of an axisymmetric McKenna burner. Water vapor transitions at 1391.67 and 1442.67 nm are probed using calibration-free wavelength modulation spectroscopy with second harmonic detection (WMS-2f). A single collimated laser beam is swept parallel to the burner surface, where scans yield pairs of line-of-sight (LOS) data at multiple radial locations. Radial profiles of absorption data are reconstructed using Tikhonov regularized Abel inversion, which suppresses the amplification of experimental noise that is typically observed for reconstructions with high spatial resolution. Based on spectral data reconstructions, temperatures and mole fractions are calculated point-by-point. Here, a least-squares approach addresses difficulties due to modulation depths that cannot be universally optimized due to a nonuniform domain. Experimental results show successful reconstructions of temperature and mole fraction profiles based on two-transition, nonoptimally modulated WMS-2f and Tikhonov regularized Abel inversion, and thus validate the technique as a viable diagnostic tool for flame measurements.
Regularized multiple criteria linear programs for classification
SHI Yong; TIAN YingJie; CHEN XiaoJun; ZHANG Peng
2009-01-01
Although multiple criteria mathematical program (MCMP), as an alternative method of classification, has been used in various real-life data mining problems, its mathematical structure of solvability is still challengeable. This paper proposes a regularized multiple criteria linear program (RMCLP) for two classes of classification problems. It first adds some regularization terms in the objective function of the known multiple criteria linear program (MCLP) model for possible existence of solution. Then the paper describes the mathematical framework of the solvability. Finally, a series of experimental tests are conducted to illustrate the performance of the proposed RMCLP with the existing methods: MCLP, multiple criteria quadratic program (MCQP), and support vector machine (SVM). The results of four publicly available datasets and a real-life credit dataset all show that RMCLP is a competitive method in classification. Furthermore, this paper explores an ordinal RMCLP (ORMCLP) model for ordinal multi-group problems. Comparing ORMCLP with traditional methods such as One-Against-One, One-Against-The rest on large-scale credit card dataset, experimental results show that both ORMCLP and RMCLP perform well.
Supporting Regularized Logistic Regression Privately and Efficiently.
Wenfa Li
Full Text Available As one of the most popular statistical and machine learning models, logistic regression with regularization has found wide adoption in biomedicine, social sciences, information technology, and so on. These domains often involve data of human subjects that are contingent upon strict privacy regulations. Concerns over data privacy make it increasingly difficult to coordinate and conduct large-scale collaborative studies, which typically rely on cross-institution data sharing and joint analysis. Our work here focuses on safeguarding regularized logistic regression, a widely-used statistical model while at the same time has not been investigated from a data security and privacy perspective. We consider a common use scenario of multi-institution collaborative studies, such as in the form of research consortia or networks as widely seen in genetics, epidemiology, social sciences, etc. To make our privacy-enhancing solution practical, we demonstrate a non-conventional and computationally efficient method leveraging distributing computing and strong cryptography to provide comprehensive protection over individual-level and summary data. Extensive empirical evaluations on several studies validate the privacy guarantee, efficiency and scalability of our proposal. We also discuss the practical implications of our solution for large-scale studies and applications from various disciplines, including genetic and biomedical studies, smart grid, network analysis, etc.
Supporting Regularized Logistic Regression Privately and Efficiently.
Li, Wenfa; Liu, Hongzhe; Yang, Peng; Xie, Wei
2016-01-01
As one of the most popular statistical and machine learning models, logistic regression with regularization has found wide adoption in biomedicine, social sciences, information technology, and so on. These domains often involve data of human subjects that are contingent upon strict privacy regulations. Concerns over data privacy make it increasingly difficult to coordinate and conduct large-scale collaborative studies, which typically rely on cross-institution data sharing and joint analysis. Our work here focuses on safeguarding regularized logistic regression, a widely-used statistical model while at the same time has not been investigated from a data security and privacy perspective. We consider a common use scenario of multi-institution collaborative studies, such as in the form of research consortia or networks as widely seen in genetics, epidemiology, social sciences, etc. To make our privacy-enhancing solution practical, we demonstrate a non-conventional and computationally efficient method leveraging distributing computing and strong cryptography to provide comprehensive protection over individual-level and summary data. Extensive empirical evaluations on several studies validate the privacy guarantee, efficiency and scalability of our proposal. We also discuss the practical implications of our solution for large-scale studies and applications from various disciplines, including genetic and biomedical studies, smart grid, network analysis, etc.
Supporting Regularized Logistic Regression Privately and Efficiently
Li, Wenfa; Liu, Hongzhe; Yang, Peng; Xie, Wei
2016-01-01
As one of the most popular statistical and machine learning models, logistic regression with regularization has found wide adoption in biomedicine, social sciences, information technology, and so on. These domains often involve data of human subjects that are contingent upon strict privacy regulations. Concerns over data privacy make it increasingly difficult to coordinate and conduct large-scale collaborative studies, which typically rely on cross-institution data sharing and joint analysis. Our work here focuses on safeguarding regularized logistic regression, a widely-used statistical model while at the same time has not been investigated from a data security and privacy perspective. We consider a common use scenario of multi-institution collaborative studies, such as in the form of research consortia or networks as widely seen in genetics, epidemiology, social sciences, etc. To make our privacy-enhancing solution practical, we demonstrate a non-conventional and computationally efficient method leveraging distributing computing and strong cryptography to provide comprehensive protection over individual-level and summary data. Extensive empirical evaluations on several studies validate the privacy guarantee, efficiency and scalability of our proposal. We also discuss the practical implications of our solution for large-scale studies and applications from various disciplines, including genetic and biomedical studies, smart grid, network analysis, etc. PMID:27271738
POTENSI MAHASISWA REGULAR BLOCK SYSTEM (RBS UNIVERSITAS KANJURUHAN MALANG
R. Anastasia Endang Susilawati
2008-02-01
Full Text Available Survey conducted to obtain get situation of quadran strategy determine elegibility of increase of maximum expense lecturing of program student of Regular Block System (RBS at institute education of University of Kanjuruhan Unlucky enlisting and active in year of akademic 2006/2007. Used variables shall be as follows: 1 psicografis, 2 social of demography and economics, 3 geografis, 4 benefit, 5 last experience, 6 physical medium, 7 expense, 8 advertisement, 9 word of mouth communication, 10 image of PTS, 11 quality of technical service, 12 quality of functional service, 13 satisfaction of student, and 14 student expectation. Technique data collecting use quesioner which consist of question closed and is open. Obtained to be data to be analysed to descriptive method and SWOT ( strengths, weaknesses, opportunities, threats. Result of survey indicate that University of Kanjuruhan unlucky reside in aggresive strategy ( strength 71.12% and opportunity 71.1% and also strategy diversify ( strength 71.12% and threat 69.8%, hence competent to boost up the expense of maximum study equal to 19.41% made balance to with diversification of program to overcome threats faced in this time and in the future.
2000-01-01
Personnel in the distribution groups Aleph, Delphi, L3, Opal who also work for other experiments than at LEP, should contact their dispatchers to explain their activities for the future, after LEP dismantling in order to be maintained on the regular distribution list at Individual DosimetryWe inform all staff and users under regular dosimetric control that the dosimeters for the monitoring period MAY/JUNE will be available from their usual dispatchers on Tuesday 2 May.Please have your films changed before the 12 May.The colour of the dosimeter valid in is MAY/JUNE is YELLOW.Individual Dosimetry Service will be closed on Friday 28 April.
2000-01-01
Personnel in the distribution groups Aleph, Delphi, L3, Opal who also work for other experiments than at LEP, should contact their dispatchers to explain their activities for the future, after LEP dismantling in order to be maintained on the regular distribution list at Individual Dosimetry ServiceWe inform all staffs and users under regular dosimetric control that the dosimeters for the monitoring period JULY/AUGUST are available from their usual dispatchers.Please have your films changed before the 10th of July.The colour of the dosimeter valid in JULY/AUGUST is PINK.
Neutron dosimetric measurements in shuttle and MIR.
Reitz, G
2001-06-01
Detector packages consisting of thermoluminescence detectors (TLD), nuclear emulsions and plastic track detectors were exposed at identical positions inside MIR space station and on shuttle flights inside Spacelab and Spacehab during different phases of the solar cycle. The objectives of the investigations are to provide data on charge and energy spectra of heavy ions, and the contribution of events with low-energy deposit (protons, electrons, gamma, etc.) to the dose, as well as the contribution of secondaries, such as nuclear disintegration stars and neutrons. For neutron dosimetry 6LiF (TLD600) and 7LiF (TLD700) chips were used both of which have almost the same response to gamma rays but different response to neutrons. Neutrons in space are produced mainly in evaporation and knock-on processes with energies mainly of 1-10 MeV and up to several 100 MeV, respectively. The energy spectrum undergoes continuous changes toward greater depth in the attenuating material until an equilibrium is reached. In equilibrium, the spectrum is a wide continuum extending down to thermal energies to which the 6LiF is sensitive. Based on the difference of absorbed doses in the 6LiF and 7LiF chips, thermal neutron fluxes from 1 to 2.3 cm-2 s-1 are calculated using the assumption that the maximum induced dose in TLD600 for 1 neutron cm-2 is 1.6 x 10(-10) Gy (Horowitz and Freeman, Nucl. Instr. and Meth. 157 (1978) 393). It is assumed that the flux of high-energy neutrons is at least of that quantity. Tissue doses were calculated taking as a mean ambient absorbed dose per neutron 6 x10(-12) Gy cm2 (for a10 MeV neutron). The neutron equivalent doses for the above-mentioned fluxes are 52 micro Gy d-1 and 120 micro Gy d-1. In recent experiments, a personal neutron dosimeter was integrated into the dosimeter packages. First results of this dosimeter which is based on nuclear track detectors with converter foils are reported. For future measurements, a scintillator counter with
Advanced Health Management System for the Space Shuttle Main Engine
Davidson, Matt; Stephens, John
2004-01-01
Boeing-Canoga Park (BCP) and NASA-Marshall Space Flight Center (NASA-MSFC) are developing an Advanced Health Management System (AHMS) for use on the Space Shuttle Main Engine (SSME) that will improve Shuttle safety by reducing the probability of catastrophic engine failures during the powered ascent phase of a Shuttle mission. This is a phased approach that consists of an upgrade to the current Space Shuttle Main Engine Controller (SSMEC) to add turbomachinery synchronous vibration protection and addition of a separate Health Management Computer (HMC) that will utilize advanced algorithms to detect and mitigate predefined engine anomalies. The purpose of the Shuttle AHMS is twofold; one is to increase the probability of successfully placing the Orbiter into the intended orbit, and the other is to increase the probability of being able to safely execute an abort of a Space Transportation System (STS) launch. Both objectives are achieved by increasing the useful work envelope of a Space Shuttle Main Engine after it has developed anomalous performance during launch and the ascent phase of the mission. This increase in work envelope will be the result of two new anomaly mitigation options, in addition to existing engine shutdown, that were previously unavailable. The added anomaly mitigation options include engine throttle-down and performance correction (adjustment of engine oxidizer to fuel ratio), as well as enhanced sensor disqualification capability. The HMC is intended to provide the computing power necessary to diagnose selected anomalous engine behaviors and for making recommendations to the engine controller for anomaly mitigation. Independent auditors have assessed the reduction in Shuttle ascent risk to be on the order of 40% with the combined system and a three times improvement in mission success.
Orthostatic Intolerance After ISS and Space Shuttle Missions.
Lee, Stuart M C; Feiveson, Alan H; Stein, Sydney; Stenger, Michael B; Platts, Steven H
2015-12-01
Cardiovascular deconditioning apparently progresses with flight duration, resulting in a greater incidence of orthostatic intolerance following long-duration missions. Therefore, we anticipated that the proportion of astronauts who could not complete an orthostatic tilt test (OTT) would be higher on landing day and the number of days to recover greater after International Space Station (ISS) than after Space Shuttle missions. There were 20 ISS and 65 Shuttle astronauts who participated in 10-min 80° head-up tilt tests 10 d before launch, on landing day (R+0), and 3 d after landing (R+3). Fisher's Exact Test was used to compare the ability of ISS and Shuttle astronauts to complete the OTT. Cox regression was used to identify cardiovascular parameters associated with OTT completion and mixed model analysis was used to compare the change and recovery rates between groups. The proportion of astronauts who completed the OTT on R+0 (2 of 6) was less in ISS than in Shuttle astronauts (52 of 65). On R+3, 13 of 15 and 19 of 19 of the ISS and Shuttle astronauts, respectively, completed the OTT. An index comprised of stroke volume and diastolic blood pressure provided a good prediction of OTT completion and was altered by spaceflight similarly for both astronaut groups, but recovery was slower in ISS than in Shuttle astronauts. The proportion of ISS astronauts who could not complete the OTT on R+0 was greater and the recovery rate slower after ISS compared to Shuttle missions. Thus, mission planners and crew surgeons should anticipate the need to tailor scheduled activities and level of medical support to accommodate protracted recovery after long-duration microgravity exposures.
COUNTING ROOTED NEAR-4-REGULAR EULERIAN MAPS ON SOME SURFACES
RenHan; LiuYanpei
1999-01-01
In this article the rooted planar near-4-regular Eulerian trails are enumerated and an explicit formula for such maps is presented. Further, the rooted near-4-regular Eulerian maps on the torus are counted in an exact way.
A distance regular graph of type E1 Ed
无
2000-01-01
In this note, the distance regular graph of type E1 Ed is considered and some characterization of the type graph is given. The results generalize the characterization of tight distance regular graphs.
The Penrose singularity theorem in regularity $C^{1,1}$
Kunzinger, Michael; Vickers, James A
2015-01-01
We extend the validity of the Penrose singularity theorem to spacetime metrics of regularity $C^{1,1}$. The proof is based on regularisation techniques, combined with recent results in low regularity causality theory.
Thorpe, Douglas G.
1991-01-01
An operation and schedule enhancement is shown that replaces the four-body cluster (Space Shuttle Orbiter (SSO), external tank, and two solid rocket boosters) with a simpler two-body cluster (SSO and liquid rocket booster/external tank). At staging velocity, the booster unit (liquid-fueled booster engines and vehicle support structure) is jettisoned while the remaining SSO and supertank continues on to orbit. The simpler two-bodied cluster reduces the processing and stack time until SSO mate from 57 days (for the solid rocket booster) to 20 days (for the liquid rocket booster). The areas in which liquid booster systems are superior to solid rocket boosters are discussed. Alternative and future generation vehicles are reviewed to reveal greater performance and operations enhancements with more modifications to the current methods of propulsion design philosophy, e.g., combined cycle engines, and concentric propellant tanks.
Wilson, Timmy R.; Kichak, Robert A.; McManamen, John P.; Kramer-White, Julie; Raju, Ivatury S.; Beil, Robert J.; Weeks, John F.; Elliott, Kenny B.
2009-01-01
The NASA Engineering and Safety Center (NESC) was tasked with assessing the validity of an alternate opinion that surfaced during the investigation of recurrent failures at the Space Shuttle T-0 umbilical interface. The most visible problem occurred during the Space Transportation System (STS)-112 launch when pyrotechnics used to separate Solid Rocket Booster (SRB) Hold-Down Post (HDP) frangible nuts failed to fire. Subsequent investigations recommended several improvements to the Ground Support Equipment (GSE) and processing changes were implemented, including replacement of ground-half cables and connectors between flights, along with wiring modifications to make critical circuits quad-redundant across the interface. The alternate opinions maintained that insufficient data existed to exonerate the design, that additional data needed to be gathered under launch conditions, and that the interface should be further modified to ensure additional margin existed to preclude failure. The results of the assessment are contained in this report.
Laplacian embedded regression for scalable manifold regularization.
Chen, Lin; Tsang, Ivor W; Xu, Dong
2012-06-01
Semi-supervised learning (SSL), as a powerful tool to learn from a limited number of labeled data and a large number of unlabeled data, has been attracting increasing attention in the machine learning community. In particular, the manifold regularization framework has laid solid theoretical foundations for a large family of SSL algorithms, such as Laplacian support vector machine (LapSVM) and Laplacian regularized least squares (LapRLS). However, most of these algorithms are limited to small scale problems due to the high computational cost of the matrix inversion operation involved in the optimization problem. In this paper, we propose a novel framework called Laplacian embedded regression by introducing an intermediate decision variable into the manifold regularization framework. By using ∈-insensitive loss, we obtain the Laplacian embedded support vector regression (LapESVR) algorithm, which inherits the sparse solution from SVR. Also, we derive Laplacian embedded RLS (LapERLS) corresponding to RLS under the proposed framework. Both LapESVR and LapERLS possess a simpler form of a transformed kernel, which is the summation of the original kernel and a graph kernel that captures the manifold structure. The benefits of the transformed kernel are two-fold: (1) we can deal with the original kernel matrix and the graph Laplacian matrix in the graph kernel separately and (2) if the graph Laplacian matrix is sparse, we only need to perform the inverse operation for a sparse matrix, which is much more efficient when compared with that for a dense one. Inspired by kernel principal component analysis, we further propose to project the introduced decision variable into a subspace spanned by a few eigenvectors of the graph Laplacian matrix in order to better reflect the data manifold, as well as accelerate the calculation of the graph kernel, allowing our methods to efficiently and effectively cope with large scale SSL problems. Extensive experiments on both toy and real
Adjacent strong edge colorings and total colorings of regular graphs
WOODALL; Douglas; R
2009-01-01
It is conjectured that χas(G) = χt(G) for every k-regular graph G with no C5 component (k 2). This conjecture is shown to be true for many classes of graphs, including: graphs of type 1; 2-regular, 3-regular and (|V (G)| - 2)-regular graphs; bipartite graphs; balanced complete multipartite graphs; k-cubes; and joins of two matchings or cycles.
Completely Regular Semigroups with Generalized Strong Semilattice Decompositions
Xiangzhi Kong; K.P. Shum
2005-01-01
The concept of ρG-strong semilattice of semigroups is introduced. By using this concept, we study Green's relation H on a completely regular semigroup S. Necessary and sufficient conditions for S/H to be a regular band or a right quasi-normal band are obtained. Important results of Petrich and Reilly on regular cryptic semigroups are generalized and enriched. In particular, characterization theorems of regular cryptogroups and normal cryptogroups are obtained.
Regularity properties of a class of hybrid methods
DaxueCHEN; AiguoXIAO
2000-01-01
The existence of spurious steady solutions and period-2 solutions in constant timestep is studied. The concepts of Rill-regularity and R-regularity of a class of hybrid methods for dynamical systems of ordinary differential equations are introduced and studied.Some conditions guaranteeing R-regularity and R-regularity of such methods applied to dynamical systems of ordinary differential equations with some important structures are given.
Invariant Regularization of Supersymmetric Chiral Gauge Theory
Hayashi, T; Okuyama, K; Suzuki, H; Hayashi, Takuya; Ohshima, Yoshihisa; Okuyama, Kiyoshi; Suzuki, Hiroshi
1998-01-01
We formulate a manifestly supersymmetric gauge-covariant regularization of supersymmetric chiral gauge theories. In our scheme, the effective action in the superfield background-field method above one-loop is always supersymmetric and gauge invariant. The gauge anomaly has the covariant form and can emerge only in one-loop diagrams with all the external lines are the background gauge superfield. We also present several illustrative applications in the one-loop approximation: The self-energy part of the chiral multiplet and the gauge multiplet; the super-chiral anomaly and the superconformal anomaly; as the corresponding anomalous commutators, the Konishi anomaly and the anomalous supersymmetric transformation law of the supercurrent (the ``central extension'' of N=1 supersymmetry algebra) and of the R-current.
Generalized equations of state and regular universes
Contreras, Felipe; González, Esteban
2015-01-01
We found non singular solutions for universes filled with a fluid which obey a Generalized Equation of State of the form $P(\\rho)=-A\\rho+\\gamma\\rho^{\\lambda}$. An emergent universe is obtained if $A=1$ and $\\lambda =1/2$. If the matter source is reinterpret as that of a scalar matter field with some potential, the corresponding potential is derived. For a closed universe, an exact bounce solution is found for $A=1/3$ and the same $\\lambda $. We also explore how the composition of theses universes can be interpreted in terms of known fluids. It is of interest to note that accelerated solutions previously found for the late time evolution also represent regular solutions at early times.
Transient Lunar Phenomena: Regularity and Reality
Crotts, Arlin P S
2007-01-01
Transient lunar phenomena (TLPs) have been reported for centuries, but their nature is largely unsettled. A review of TLP reports shows regularities in the observations; a key question is whether this structure is imposed by human observer effects, terrestrial atmospheric effects or processes tied to the lunar surface. I interrogate an extensive TLP catalog to determine if human factors determine the distribution of TLP reports. I divide the sample according to variables which should produce varying results if determining factors involve humans e.g., historical epoch or geographical location of the observer, not reflecting phenomena tied to the lunar surface. Regardless of how we split the ample, the results are similar: ~50% of the reports involve crater Aristarchus nd vicinity, ~16% from Plato, ~6% from other recent, major impacts, plus a few at Grimaldi. Mare Crisium produces a robust signal for three of five averages of up to 7% of the reports (however, Crisium is an extended feature). The consistency in ...
Explicit formulas for regularized products and series
Jorgenson, Jay; Goldfeld, Dorian
1994-01-01
The theory of explicit formulas for regularized products and series forms a natural continuation of the analytic theory developed in LNM 1564. These explicit formulas can be used to describe the quantitative behavior of various objects in analytic number theory and spectral theory. The present book deals with other applications arising from Gaussian test functions, leading to theta inversion formulas and corresponding new types of zeta functions which are Gaussian transforms of theta series rather than Mellin transforms, and satisfy additive functional equations. Their wide range of applications includes the spectral theory of a broad class of manifolds and also the theory of zeta functions in number theory and representation theory. Here the hyperbolic 3-manifolds are given as a significant example.
Generalized equations of state and regular universes
Contreras, F.; Cruz, N.; González, E.
2016-05-01
We found non singular solutions for universes filled with a fluid which obey a Generalized Equation of State of the form P(ρ) = - Aρ + γρλ. An emergent universe is obtained if A =1 and λ = 1/2. If the matter source is reinterpret as that of a scalar matter field with some potential, the corresponding potential is derived. For a closed universe, an exact bounce solution is found for A = 1/3 and the same λ. We also explore how the composition of theses universes ean be interpreted in terms of known fluids. It is of interest to note that accelerated solutions previously found for the late time evolution also represent regular solutions at early times.
Sparse regularization in limited angle tomography
Frikel, Jürgen
2011-01-01
We investigate the reconstruction problem of limited angle tomography. Such problems arise naturally in applications like digital breast tomosynthesis, dental tomography, electron microscopy etc. Since the acquired tomographic data is highly incomplete, the reconstruction problem is severely ill-posed and the traditional reconstruction methods, such as filtered backprojection (FBP), do not perform well in such situations. To stabilize the reconstruction procedure additional prior knowledge about the unknown object has to be integrated into the reconstruction process. In this work, we propose the use of the sparse regularization technique in combination with curvelets. We argue that this technique gives rise to an edge-preserving reconstruction. Moreover, we show that the dimension of the problem can be significantly reduced in the curvelet domain. To this end, we give a characterization of the kernel of limited angle Radon transform in terms of curvelets and derive a characterization of solutions obtained thr...
Trapping in dendrimers and regular hyperbranched polymers
Wu, Bin; Zhang, Zhongzhi; Chen, Guanrong
2012-01-01
Dendrimers and regular hyperbranched polymers are two classic families of macromolecules, which can be modeled by Cayley trees and Vicsek fractals, respectively. In this paper, we study the trapping problem in Cayley trees and Vicsek fractals with different underlying geometries, focusing on a particular case with a perfect trap located at the central node. For both networks, we derive the exact analytic formulas in terms of the network size for the average trapping time (ATT)---the average of node-to-trap mean first-passage time over the whole networks. The obtained closed-form solutions show that for both Cayley trees and Vicsek fractals, the ATT display quite different scalings with various system sizes, which implies that the underlying structure plays a key role on the efficiency of trapping in polymer networks. Moreover, the dissimilar scalings of ATT may allow to differentiate readily between dendrimers and hyperbranched polymers.
Regularization destriping of remote sensing imagery
R. Basnayake
2017-07-01
Full Text Available We illustrate the utility of variational destriping for ocean color images from both multispectral and hyperspectral sensors. In particular, we examine data from a filter spectrometer, the Visible Infrared Imaging Radiometer Suite (VIIRS on the Suomi National Polar Partnership (NPP orbiter, and an airborne grating spectrometer, the Jet Population Laboratory's (JPL hyperspectral Portable Remote Imaging Spectrometer (PRISM sensor. We solve the destriping problem using a variational regularization method by giving weights spatially to preserve the other features of the image during the destriping process. The target functional penalizes the neighborhood of stripes (strictly, directionally uniform features while promoting data fidelity, and the functional is minimized by solving the Euler–Lagrange equations with an explicit finite-difference scheme. We show the accuracy of our method from a benchmark data set which represents the sea surface temperature off the coast of Oregon, USA. Technical details, such as how to impose continuity across data gaps using inpainting, are also described.
Regularization destriping of remote sensing imagery
Basnayake, Ranil; Bollt, Erik; Tufillaro, Nicholas; Sun, Jie; Gierach, Michelle
2017-07-01
We illustrate the utility of variational destriping for ocean color images from both multispectral and hyperspectral sensors. In particular, we examine data from a filter spectrometer, the Visible Infrared Imaging Radiometer Suite (VIIRS) on the Suomi National Polar Partnership (NPP) orbiter, and an airborne grating spectrometer, the Jet Population Laboratory's (JPL) hyperspectral Portable Remote Imaging Spectrometer (PRISM) sensor. We solve the destriping problem using a variational regularization method by giving weights spatially to preserve the other features of the image during the destriping process. The target functional penalizes the neighborhood of stripes (strictly, directionally uniform features) while promoting data fidelity, and the functional is minimized by solving the Euler-Lagrange equations with an explicit finite-difference scheme. We show the accuracy of our method from a benchmark data set which represents the sea surface temperature off the coast of Oregon, USA. Technical details, such as how to impose continuity across data gaps using inpainting, are also described.
A regularity lemma and twins in words
Axenovich, Maria; Puzynina, Svetlana
2012-01-01
For a word $S$, let $f(S)$ be the largest integer $m$ such that there are two disjoints identical (scattered) subwords of length $m$. Let $f(n, \\Sigma) = \\min \\{f(S): S \\text{is of length} n, \\text{over alphabet} \\Sigma \\}$. Here, it is shown that \\[2f(n, \\{0,1\\}) = n-o(n)\\] using the regularity lemma for words. I.e., any binary word of length $n$ can be split into two identical subwords (referred to as twins) and, perhaps, a remaining subword of length $o(n)$. A similar result is proven for $k$ identical subwords of a word over an alphabet with at most $k$ letters.
Regular phantom black holes as gravitational lenses
Eiroa, Ernesto F
2015-01-01
The distortion of the spacetime structure in the surroundings of black holes affects the trajectories of light rays. As a consequence, black holes can act as gravitational lenses. Observations of type Ia supernovas, show that our Universe is in accelerated expansion. The usual explanation is that the Universe is filled with a negative pressure fluid called dark energy, which accounts for 70 % of its total density, which can be modeled by a self-interacting scalar field with a potential. We consider a class of spherically symmetric regular phantom black holes as gravitational lenses. We study large deflection angles, using the strong deflection limit, corresponding to an asymptotic logarithmic approximation. In this case, photons passing close to the photon sphere of the black hole experiment several loops around it before they emerge towards the observer, giving place to two infinite sets of relativistic images. Within this limit, we find analytical expressions for the positions and the magnifications of thes...
Local orientational mobility in regular hyperbranched polymers
Dolgushev, Maxim; Fürstenberg, Florian; Guérin, Thomas
2016-01-01
We study the dynamics of local bond orientation in regular hyperbranched polymers modeled by Vicsek fractals. The local dynamics is investigated through the temporal autocorrelation functions of single bonds and the corresponding relaxation forms of the complex dielectric susceptibility. We show that the dynamic behavior of single segments depends on their remoteness from the periphery rather than on the size of the whole macromolecule. Remarkably, the dynamics of the core segments (which are most remote from the periphery) shows a scaling behavior that differs from the dynamics obtained after structural average. We analyze the most relevant processes of single segment motion and provide an analytic approximation for the corresponding relaxation times. Furthermore, we describe an iterative method to calculate the orientational dynamics in the case of very large macromolecular sizes.
Stability of C-regularized Semigroups
Miao LI; Quan ZHENG
2004-01-01
Let T = (T(t))t≥0 be a bounded C-regularized semigroup generated by A on a Banachspace X and R(C) be dense in X. We show that if there is a dense subspace Y of X such that forevery x ∈ Y, σu(A, Cx), the set of all points λ∈ iR to which (λ - A)-1Cx can not be extendedholomorphically, is at most countable and σr(A) ∩ iR = φ, then T is stable. A stability result for the case of R(C) being non-dense is also given. Our results generalize the work on the stability of strongly continuous semigroups.
Vertex-antimagic Labelings of Regular Graphs
Ali AHMAD; Kashif ALI; Martin BA(C)A; Petr KOV(A)(R); Andrea SEMANI(C)OV(A)-FE(N)OV(C)(I)KOV(A)
2012-01-01
Let G =(V,E) be a finite,simple and undirected graph with p vertices and q edges.An (a,d)-vertex-antimagic total labeling of G is a bijection f from V(G).∪E(G) onto the set of consecutive integers 1,2,...,p + q,such that the vertex-weights form an arithmetic progression with the initial term a and difference d,where the vertex-weight of x is the sum of the value f(x) assigned to the vertex x together with all values f(xy) assigned to edges xy incident to x.Such labeling is called super if the smallest possible labels appear on the vertices.In this paper,we study the properties of such labelings and examine their existence for 2r-regular graphs when the difference d is 0,1,...,r + 1.
Regularized canonical correlation analysis with unlabeled data
Xi-chuan ZHOU; Hai-bin SHEN
2009-01-01
In standard canonical correlation analysis (CCA), the data from definite datasets are used to estimate their canonical correlation. In real applications, for example in bilingual text retrieval, it may have a great portion of data that we do not know which set it belongs to. This part of data is called unlabeled data, while the rest from definite datasets is called labeled data. We propose a novel method called regularized canonical correlation analysis (RCCA), which makes use of both labeled and unlabeled samples. Specifically, we learn to approximate canonical correlation as if all data were labeled. Then. we describe a generalization of RCCA for the multi-set situation. Experiments on four real world datasets, Yeast, Cloud, Iris, and Haberman, demonstrate that,by incorporating the unlabeled data points, the accuracy of correlation coefficients can be improved by over 30%.
Robust Clustering Using Outlier-Sparsity Regularization
Forero, Pedro A; Giannakis, Georgios B
2011-01-01
Notwithstanding the popularity of conventional clustering algorithms such as K-means and probabilistic clustering, their clustering results are sensitive to the presence of outliers in the data. Even a few outliers can compromise the ability of these algorithms to identify meaningful hidden structures rendering their outcome unreliable. This paper develops robust clustering algorithms that not only aim to cluster the data, but also to identify the outliers. The novel approaches rely on the infrequent presence of outliers in the data which translates to sparsity in a judiciously chosen domain. Capitalizing on the sparsity in the outlier domain, outlier-aware robust K-means and probabilistic clustering approaches are proposed. Their novelty lies on identifying outliers while effecting sparsity in the outlier domain through carefully chosen regularization. A block coordinate descent approach is developed to obtain iterative algorithms with convergence guarantees and small excess computational complexity with res...
The Anomaly Structure of Regularized Supergravity
Butter, Daniel
2014-01-01
On-shell Pauli-Villars regularization of the one-loop divergences of supergravity theories is used to study the anomaly structure of supergravity and the cancellation of field theory anomalies under a $U(1)$ gauge transformation and under the T-duality group of modular transformations in effective supergravity theories with three K\\"ahler moduli $T^i$ obtained from orbifold compactification of the weakly coupled heterotic string. This procedure requires constraints on the chiral matter representations of the gauge group that are consistent with known results from orbifold compactifications. Pauli-Villars regulator fields allow for the cancellation of all quadratic and logarithmic divergences, as well as most linear divergences. If all linear divergences were canceled, the theory would be anomaly free, with noninvariance of the action arising only from Pauli-Villars masses. However there are linear divergences associated with nonrenormalizable gravitino/gaugino interactions that cannot be canceled by PV fields...
Thermodynamics of regular accelerating black holes
Astorino, Marco
2017-03-01
Using the covariant phase space formalism, we compute the conserved charges for a solution, describing an accelerating and electrically charged Reissner-Nordstrom black hole. The metric is regular provided that the acceleration is driven by an external electric field, in spite of the usual string of the standard C-metric. The Smarr formula and the first law of black hole thermodynamics are fulfilled. The resulting mass has the same form of the Christodoulou-Ruffini irreducible mass. On the basis of these results, we can extrapolate the mass and thermodynamics of the rotating C-metric, which describes a Kerr-Newman-(A)dS black hole accelerated by a pulling string.
Homological Pisot Substitutions and Exact Regularity
Barge, Marcy; Jones, Leslie; Sadun, Lorenzo
2010-01-01
We consider one-dimensional substitution tiling spaces where the dilatation (stretching factor) is a degree d Pisot number, and where the first rational Cech cohomology is d-dimensional. We construct examples of such "homological Pisot" substitutions that do not have pure discrete spectra. These examples are not unimodular, and we conjecture that the coincidence rank must always divide a power of the norm of the dilatation. To support this conjecture, we show that homological Pisot substitutions exhibit an Exact Regularity Property (ERP), in which the number of occurrences of a patch for a return length is governed strictly by the length. The ERP puts strong constraints on the measure of any cylinder set in the corresponding tiling space.
Regularization of Instantaneous Frequency Attribute Computations
Yedlin, M. J.; Margrave, G. F.; Van Vorst, D. G.; Ben Horin, Y.
2014-12-01
We compare two different methods of computation of a temporally local frequency:1) A stabilized instantaneous frequency using the theory of the analytic signal.2) A temporally variant centroid (or dominant) frequency estimated from a time-frequency decomposition.The first method derives from Taner et al (1979) as modified by Fomel (2007) and utilizes the derivative of the instantaneous phase of the analytic signal. The second method computes the power centroid (Cohen, 1995) of the time-frequency spectrum, obtained using either the Gabor or Stockwell Transform. Common to both methods is the necessity of division by a diagonal matrix, which requires appropriate regularization.We modify Fomel's (2007) method by explicitly penalizing the roughness of the estimate. Following Farquharson and Oldenburg (2004), we employ both the L curve and GCV methods to obtain the smoothest model that fits the data in the L2 norm.Using synthetic data, quarry blast, earthquakes and the DPRK tests, our results suggest that the optimal method depends on the data. One of the main applications for this work is the discrimination between blast events and earthquakesFomel, Sergey. " Local seismic attributes." , Geophysics, 72.3 (2007): A29-A33.Cohen, Leon. " Time frequency analysis theory and applications." USA: Prentice Hall, (1995).Farquharson, Colin G., and Douglas W. Oldenburg. "A comparison of automatic techniques for estimating the regularization parameter in non-linear inverse problems." Geophysical Journal International 156.3 (2004): 411-425.Taner, M. Turhan, Fulton Koehler, and R. E. Sheriff. " Complex seismic trace analysis." Geophysics, 44.6 (1979): 1041-1063.
Regularization for Atmospheric Temperature Retrieval Problems
Velez-Reyes, Miguel; Galarza-Galarza, Ruben
1997-01-01
Passive remote sensing of the atmosphere is used to determine the atmospheric state. A radiometer measures microwave emissions from earth's atmosphere and surface. The radiance measured by the radiometer is proportional to the brightness temperature. This brightness temperature can be used to estimate atmospheric parameters such as temperature and water vapor content. These quantities are of primary importance for different applications in meteorology, oceanography, and geophysical sciences. Depending on the range in the electromagnetic spectrum being measured by the radiometer and the atmospheric quantities to be estimated, the retrieval or inverse problem of determining atmospheric parameters from brightness temperature might be linear or nonlinear. In most applications, the retrieval problem requires the inversion of a Fredholm integral equation of the first kind making this an ill-posed problem. The numerical solution of the retrieval problem requires the transformation of the continuous problem into a discrete problem. The ill-posedness of the continuous problem translates into ill-conditioning or ill-posedness of the discrete problem. Regularization methods are used to convert the ill-posed problem into a well-posed one. In this paper, we present some results of our work in applying different regularization techniques to atmospheric temperature retrievals using brightness temperatures measured with the SSM/T-1 sensor. Simulation results are presented which show the potential of these techniques to improve temperature retrievals. In particular, no statistical assumptions are needed and the algorithms were capable of correctly estimating the temperature profile corner at the tropopause independent of the initial guess.
Discriminative Elastic-Net Regularized Linear Regression.
Zhang, Zheng; Lai, Zhihui; Xu, Yong; Shao, Ling; Wu, Jian; Xie, Guo-Sen
2017-03-01
In this paper, we aim at learning compact and discriminative linear regression models. Linear regression has been widely used in different problems. However, most of the existing linear regression methods exploit the conventional zero-one matrix as the regression targets, which greatly narrows the flexibility of the regression model. Another major limitation of these methods is that the learned projection matrix fails to precisely project the image features to the target space due to their weak discriminative capability. To this end, we present an elastic-net regularized linear regression (ENLR) framework, and develop two robust linear regression models which possess the following special characteristics. First, our methods exploit two particular strategies to enlarge the margins of different classes by relaxing the strict binary targets into a more feasible variable matrix. Second, a robust elastic-net regularization of singular values is introduced to enhance the compactness and effectiveness of the learned projection matrix. Third, the resulting optimization problem of ENLR has a closed-form solution in each iteration, which can be solved efficiently. Finally, rather than directly exploiting the projection matrix for recognition, our methods employ the transformed features as the new discriminate representations to make final image classification. Compared with the traditional linear regression model and some of its variants, our method is much more accurate in image classification. Extensive experiments conducted on publicly available data sets well demonstrate that the proposed framework can outperform the state-of-the-art methods. The MATLAB codes of our methods can be available at http://www.yongxu.org/lunwen.html.
Lower bound for the regularity index of fat points
Van Thien, Phan
2016-01-01
The problem to find an upper bound for the regularity index of fat points has been dealt with by many authors. In this paper we give a lower bound for the regularity index of fat points. It is useful for determining the regularity index.
Regular implementation in the space of compactly supported functions
Napp Avelli, D.; Shankar, Shiva; Trentelman, H.L.
2008-01-01
This article extends results on regular implementability in [P. Rocha, Canonical controllers and regular implementation of nd behaviors, in: Proceedings of the 16th IFAC World Congress, 20051 and [H.L. Trentelman, D. Napp Avelli, On the regular implementability of nD systems, Systems Control Lett. 5
On the Lipschitz Regularity in Signal Singularity Detection
LUO Li-chun
2003-01-01
The concepts of Lipschitz regularity and Hlder one are reviewed. They are not equivalent except for α＜1. A modification for Definition 1 on Lipschitz regularity in Ref.[1], which is not rigorous, is offered. Two propositions on Hlder regularity are given and proven.
The Iterated Regularization With Perturbed Operators and Noisy Data
陈宏; 侯宗义
1994-01-01
The method of iterated Tikhonov regularization with perturbed operators and noisy data for solving operators equations of the first kind is investigated. The rates of convergence of regularization approximation are achieved by using generalized Arcangeli’s method for the choice of the regularization parameter.
Brown, Joyceanne; And Others
1991-01-01
This survey of 201 regular education teachers found that the most frequently used prereferral strategies used to facilitate classroom adjustment and achievement were consultation with other professionals, parent conferences, and behavior management techniques. Elementary teachers implemented more strategies than secondary-level teachers.…
Regularity of weak solutions to the Landau-Lifshitz system in bounded regular domains
Kevin Santugini-Repiquet
2007-10-01
Full Text Available In this paper, we study the regularity, on the boundary, of weak solutions to the Landau-Lifshitz system in the framework of the micromagnetic model in the quasi-static approximation. We establish the existence of global weak solutions to the Landau-Lifshitz system whose tangential space gradient on the boundary is square integrable.
Arellano, Brenda R.
Since the end of the space shuttle program, a new generation spacecraft has been developed to transport humans back into space. NASA's Orion will carry a crew beyond low-earth orbit and the exploration of Mars may be possible in the future. Space safety becomes significant with human spaceflight and the risks are high. However, aerospace materials may provide opportunities to prevent future disasters. When the space shuttle Columbia disintegrated during re-entry in 2001, thousands of debris were collected for analysis. In contrast, when the Challenger space shuttle broke apart in 1986, all shuttle debris were buried. These tragic disasters are reminders of the importance of proper material selection and the concern of their performance in service. This research focused on investigating the effects of the debris recovered from the Columbia space shuttle after re-entry and break-up. Many of the components encountered unforeseen extreme temperatures, vibrations, and high stresses. The Columbia debris contained unique characteristics that have yet to be examined and the components for this study are the thermal protection system (TPS) carrier panel tiles and the thermal pane glass from the starboard orbiter Window 7. The alterations endured by the debris was studied through forensic materials characterization to investigate material interactions, material degradation, and thermal consequences. These materials played an essential role in the operation of the orbiter as they protected the underlying structural materials of the shuttle and underwent extreme temperatures. The methods and procedures for analyzing the debris included non-destructive and destructive evaluations. Non-destructive evaluations involved visual inspection, photographic documentation, 3D modeling, and surface elemental composition. The destructive analysis consisted of sectioning, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy
Advanced Microbial Check Valve development. [for Space Shuttle
Colombo, G. V.; Greenley, D. R.; Putnam, D. F.; Sauer, R. L.
1981-01-01
The Microbial Check Valve (MCV) is a flight qualified assembly that provides bacteriologically safe drinking water for the Space Shuttle. The 1-lb unit is basically a canister packed with an iodinated ion-exchange resin. The device is used to destroy organisms in a water stream as the water passes through it. It is equally effective for fluid flow in either direction and its primary method of disinfection is killing rather than filtering. The MCV was developed to disinfect the fuel cell water and to prevent back contamination of stored potable water on the Space Shuttle. This paper reports its potential for space applications beyond the basic Shuttle mission. Data are presented that indicate the MCV is suitable for use in advanced systems that NASA has under development for the reclamation of humidity condensate, wash water and human urine.
Effect of speedup delay on shuttle bus schedule
Nagatani, Takashi
2016-10-01
We study the bus schedule in the shuttle bus transportation system controlled by speedup. The bus schedule is closely related to the dynamic motion of the bus. The motion of a shuttle bus depends on the inflow rate of passengers and the delayed speedup control. The delayed speedup control has an important effect on the dynamic motion of the bus. We present the delayed map model for the dynamics of the shuttle bus with the delayed speedup control. The bus motion changes from a stable state, through a periodic state, to a quasi-periodic state by the delayed speedup control. The return map of the tour time displays a smooth closed curve and the bus motion is quasi-periodic. The dynamic transition to the quasi-periodic motion changes greatly with the delay time. We clarify the effect of the delayed speedup control on the bus schedule.
Maintaining space shuttle safety within an environment of change
Greenfield, Michael A.
1999-09-01
In the 10 years since the Challenger accident, NASA has developed a set of stable and capable processes to prepare the Space Shuttle for safe launch and return. Capitalizing on the extensive experience gained from a string of over 50 successful flights, NASA today is changing the way it does business in an effort to reduce cost. A single Shuttle Flight Operations Contractor (SFOC) has been chosen to operate the Shuttle. The Government role will change from direct "oversight" to "insight" gained through understanding and measuring the contractor's processes. This paper describes the program management changes underway and the NASA Safety and Mission Assurance (S&MA) organization's philosophy, role, and methodology for pursuing this new approach. It describes how audit and surveillance will replace direct oversight and how meaningful performance metrics will be implemented.