WorldWideScience

Sample records for refuelling charge 13th

  1. Study of Arkansas Nuclear One-1 13th refueling outage

    International Nuclear Information System (INIS)

    Hashiba, Takashi

    1997-01-01

    Recently performance of nuclear power plants in the USA has improved remarkably. Their average automatic shutdown rate has been sharply dropping, although it is still higher than that in Japan, and their average capacity factor has become higher than that in Japan in recent years. One of the main contributors is an extension of the operational period, and another is a shortening of refueling-outage time. It is considerably difficult to have accomplished both the improvement of plant reliability and shortening of refueling-outage time because their refueling outage corresponds to our periodical inspection which is central to maintenance activities in Japanese plants. In order to learn how they have been achieved, a visit to Arkansas Nuclear One-1 (ANO-1) which obtained the top-class result of SALP (Systematic Assessment of Licensee Performance) performed by the Nuclear Regulatory Commission was planned and study of their 13th refueling outage was carried out. Their achievements result from performance-base maintenance and on-line maintenance, based on a proper preventive maintenance program, and untiring efforts of efficiency improvement, represented by the introduction of several on-line systems. And the reason behind this is severe competition concerning power generation cost reduction. (author)

  2. Study of Arkansas Nuclear One-1 13th refueling outage

    Energy Technology Data Exchange (ETDEWEB)

    Hashiba, Takashi [Institute of Nuclear Safety System Inc., Seika, Kyoto (Japan)

    1997-09-01

    Recently performance of nuclear power plants in the USA has improved remarkably. Their average automatic shutdown rate has been sharply dropping, although it is still higher than that in Japan, and their average capacity factor has become higher than that in Japan in recent years. One of the main contributors is an extension of the operational period, and another is a shortening of refueling-outage time. It is considerably difficult to have accomplished both the improvement of plant reliability and shortening of refueling-outage time because their refueling outage corresponds to our periodical inspection which is central to maintenance activities in Japanese plants. In order to learn how they have been achieved, a visit to Arkansas Nuclear One-1 (ANO-1) which obtained the top-class result of SALP (Systematic Assessment of Licensee Performance) performed by the Nuclear Regulatory Commission was planned and study of their 13th refueling outage was carried out. Their achievements result from performance-base maintenance and on-line maintenance, based on a proper preventive maintenance program, and untiring efforts of efficiency improvement, represented by the introduction of several on-line systems. And the reason behind this is severe competition concerning power generation cost reduction. (author)

  3. Considering the dynamic refueling behavior in locating electric vehicle charging stations

    Science.gov (United States)

    Liu, K.; Sun, X. H.

    2014-11-01

    Electric vehicles (EVs) will certainly play an important role in addressing the energy and environmental challenges at current situation. However, location problem of EV charging stations was realized as one of the key issues of EVs launching strategy. While for the case of locating EV charging stations, more influence factors and constraints need to be considered since the EVs have some special attributes. The minimum requested charging time for EVs is usually more than 30minutes, therefore the possible delay time due to waiting or looking for an available station is one of the most important influence factors. In addition, the intention to purchase and use of EVs that also affects the location of EV charging stations is distributed unevenly among regions and should be considered when modelling. Unfortunately, these kinds of time-spatial constraints were always ignored in previous models. Based on the related research of refuelling behaviours and refuelling demands, this paper developed a new concept with dual objectives of minimum waiting time and maximum service accessibility for locating EV charging stations - named as Time-Spatial Location Model (TSLM). The proposed model and the traditional flow-capturing location model are applied on an example network respectively and the results are compared. Results demonstrate that time constraint has great effects on the location of EV charging stations. The proposed model has some obvious advantages and will help energy providers to make a viable plan for the network of EV charging stations.

  4. A TRIGA refueling exercise

    Energy Technology Data Exchange (ETDEWEB)

    McEwen, Michael J [Kansas State University (United States)

    1974-07-01

    In June 1973 the U.S. Atomic Energy Commission offered to assist the Department of Nuclear Engineering staff in refueling the KSU TRIGA Mkll - Nuclear Reactor. The replacement fuel was made available free of charge and a contract was negotiated between the Department of Nuclear Engineering and the A.E.C. to provide for costs incurred during the refueling operation. In addition, the A.E.C. aided in the fuel transfers by providing the names of contacts at the different laboratories and agencies concerned with fuel transfers. Data and numbers relevant to the entire reloading will be available in the short summary. (author)

  5. 13th International Conference on Information Technology

    CERN Document Server

    2016-01-01

    This book collects articles presented at the 13th International Conference on Information Technology- New Generations, April, 2016, in Las Vegas, NV USA. It includes over 100 chapters on critical areas of IT including Web Technology, Communications, Security, and Data Mining.

  6. 13th International Conference Intelligent Autonomous Systems

    CERN Document Server

    Michael, Nathan; Berns, Karsten; Yamaguchi, Hiroaki

    2016-01-01

    This book describes the latest research accomplishments, innovations, and visions in the field of robotics as presented at the 13th International Conference on Intelligent Autonomous Systems (IAS), held in Padua in July 2014, by leading researchers, engineers, and practitioners from across the world. The contents amply confirm that robots, machines, and systems are rapidly achieving intelligence and autonomy, mastering more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision making. A wide range of research results and applications are covered, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions have been selected through a rigorous peer-review process and contain many exciting and visionary ideas that will further galvanize the research community, spurring novel research directions. The series of biennial IAS conferences ...

  7. 13th International Symposium on Experimental Robotics

    CERN Document Server

    Dudek, Gregory; Khatib, Oussama; Kumar, Vijay

    2013-01-01

    The International Symposium on Experimental Robotics (ISER) is a series of bi-annual meetings which are organized in a rotating fashion around North America, Europe and Asia/Oceania. The goal of  ISER is to provide a forum for research in robotics that focuses on novelty of theoretical contributions validated by experimental results. The meetings are conceived to bring together, in a small group setting, researchers from around the world who are in the forefront of experimental robotics research. This unique reference presents the latest advances across the various fields of robotics, with ideas that are not only conceived conceptually but also explored experimentally. It collects robotics contributions on the current developments and new directions in the field of experimental robotics, which are based on the papers presented at the 13th ISER held held in Québec City, Canada, at the Fairmont Le Château Frontenac, on June 18-21, 2012. This present thirteenth edition of Experimental Robotics edited by Jayd...

  8. 13th International Congress on Polymers in Concrete

    OpenAIRE

    Aguiar, J. L. Barroso de, ed. lit.; Jalali, Said, ed. lit.; Camões, Aires, ed. lit; Ferreira, Rui Miguel, ed. lit.; International Congress on Polymers in Concrete, 13, Madeira, 2010

    2010-01-01

    The 13th International Congress on Polymers in Concrete 2010 (13th ICPIC 2010) follows a series of 12 earlier successful congresses, which has been started in London in 1975. These congresses, being held every three years, played a key role in disseminating R&D findings between researchers, academics, industrials and students. The 13th ICPIC was again a forum to exchange knowledge and most recent research findings among participants. It represented a contribution to the development of this im...

  9. Nuclear reactor machine refuelling system

    International Nuclear Information System (INIS)

    Cashen, W.S.; Erwin, D.

    1977-01-01

    Part of an on-line fuelling machine for a CANDU pressure-tube reactor is described. The present invention provides a refuelling machine wherein the fuelling components, including the fuel carrier and the closure adapter, are positively positioned and retained within the machine magazine or positively secured to the machine charge tube head, and cannot be accidentally disengaged as in former practice. The positive positioning devices include an arcuate keeper plate. Simplified hooked fingers are used. (NDH)

  10. On Power Refueling Management of HTR-PM

    International Nuclear Information System (INIS)

    Sun Furui; Luo Yong; Gao Qiang

    2014-01-01

    The refueling management is an important work of nuclear power plant , directly affecting its safety and economy. At present, the ordinary commercial pressurized water reactor (PWR) nuclear power plant has developed more mature in the refueling management, and formed a set of relatively complete system and methods.The High Temperature Gas-cooled Reactor Pebble-modules Demonstration Project(HTR-PM) has significant differences with the ordinary PWR nuclear power plant in the fuel morphology and the refueling mode. It adopts the spherical fuel element and the on-power refueling. Therefore, the HTR-PM refueling management has its own unique characteristics, but currently there is no mature experience to use for reference across the world. This paper gives a brief introduction to the HTR-PM on power refueling management, including the refueling management system construction, the refueling strategy, the fuel element internal transportation,charging and discharging, etc. It aims at finding the befitting HTR-PM refueling management methods in view of its own unique characteristics in order to ensure the orderly development of the refueling management and the refueling safety. (author)

  11. Refuelling nuclear reactors

    International Nuclear Information System (INIS)

    Stacey, J.; Webb, J.; White, W.P.; McLaren, N.H.

    1981-01-01

    An improved nuclear reactor refuelling machine is described which can be left in the reactor vault to reduce the off-load refuelling time for the reactor. The system comprises a gripper device rangeable within a tubular chute, the gripper device being movable by a pantograph. (U.K.)

  12. Reactor refueling machine simulator

    International Nuclear Information System (INIS)

    Rohosky, T.L.; Swidwa, K.J.

    1987-01-01

    This patent describes in combination: a nuclear reactor; a refueling machine having a bridge, trolley and hoist each driven by a separate motor having feedback means for generating a feedback signal indicative of movement thereof. The motors are operable to position the refueling machine over the nuclear reactor for refueling the same. The refueling machine also has a removable control console including means for selectively generating separate motor signals for operating the bridge, trolley and hoist motors and for processing the feedback signals to generate an indication of the positions thereof, separate output leads connecting each of the motor signals to the respective refueling machine motor, and separate input leads for connecting each of the feedback means to the console; and a portable simulator unit comprising: a single simulator motor; a single simulator feedback signal generator connected to the simulator motor for generating a simulator feedback signal in response to operation of the simulator motor; means for selectively connecting the output leads of the console to the simulator unit in place of the refueling machine motors, and for connecting the console input leads to the simulator unit in place of the refueling machine motor feedback means; and means for driving the single simulator motor in response to any of the bridge, trolley or hoist motor signals generated by the console and means for applying the simulator feedback signal to the console input lead associated with the motor signal being generated by the control console

  13. The 13th Malaysian general election: Uncertainties and expectations

    OpenAIRE

    M. Moniruzzaman

    2013-01-01

    Malaysia held its 13th general election on May 5, 2013 which was a contest between two coalitions, the ruling Barisan Nasional (BN) and the opposition Pakatan Rakyat (PR). The latter’s expectations for an outright win did not materialise. The election results have shown a rather status quo with minor losses and gains for the two coalitions. This study analysed the 13th election and found a number of noticeable trends. The Chinese voters have voted overwhelmingly for the opposition. The politi...

  14. Proceedings of the 13th symposium on advanced photon research

    International Nuclear Information System (INIS)

    2013-09-01

    The 13th Symposium on Advanced Photon Research was held at Kansai Photon Science Institute, Japan Atomic Energy Agency (JAEA-KPSI) in Kizugawa-shi, Kyoto on November 15 - 16, 2012. This report consists of invited and contributed papers presented at the oral and poster sessions in the Symposium. (author)

  15. The 13th international conference on scientometrics and informetrics

    DEFF Research Database (Denmark)

    Ocholla, Dennis; Ingwersen, Peter; Noyons, Ed

    2012-01-01

    The 13th International Conference on Scientometrics and Informetrics took place in Durban, South Africa from 4 to 7 July 2011, Ocholla and Ingwersen (2011). The meeting was organised under the auspices of the International Society for Scientometrics and Informetrics (ISSI) and by the ISSI 2011...

  16. Refueling of nuclear reactor

    International Nuclear Information System (INIS)

    Kaufmann, J.W.; Swidwa, K.J.; Hornak, L.P.

    1989-01-01

    This patent describes an apparatus for refueling a nuclear reactor, the reactor being disposed for refueling under water in a pit in a containment, the apparatus including a bridge to be mounted moveably over the pit on the containment, first means connected to the bridge, for moving the bridge forward and backward on the containment over the pit along a first path, a first pulse generator, connected to the moving means, responsive to the movement of the bridge, for producing pulses, means, connected to the generator,for counting the pulses, the count of the pulses being dependent on the distance of the movement of the bridge

  17. The 13th Malaysian general election: Uncertainties and expectations

    Directory of Open Access Journals (Sweden)

    M. Moniruzzaman

    2013-06-01

    Full Text Available Malaysia held its 13th general election on May 5, 2013 which was a contest between two coalitions, the ruling Barisan Nasional (BN and the opposition Pakatan Rakyat (PR. The latter’s expectations for an outright win did not materialise. The election results have shown a rather status quo with minor losses and gains for the two coalitions. This study analysed the 13th election and found a number of noticeable trends. The Chinese voters have voted overwhelmingly for the opposition. The political culture of Malaysia is also shifting toward more participatory type with increased social and economic mobility. The days of one-party dominance in Malaysia are apparently over. The electoral politics in Malaysia might become more polarised along ethnic lines which may require reshuffling of its coalition framework and design.

  18. Development of refueling support system

    International Nuclear Information System (INIS)

    Nishimura, Hiroshi; Hayashi, Shoichi; Sano, Kazuya; Hochin, Koji; Iguchi, Yukihiro

    1992-01-01

    The refueling of Fugen Nuclear Power Station requires correct management of fuels, etc. And empirical knowledge is necessary for efficient planning and refueling. Fugen developed refueling support system and put it into practical operation. The system features a network of refueling equipment and AI rules aquired from operators knowledge. The system helps make an optimized plan, displays step-by-step guidance and prints out lists of fuel locations and movements. The system reduced the labor of the operators, optimized the management and improved the reliability of the refueling. (author)

  19. Rome, October 13th, 1965: Shklovsky interviewed by Arbasino

    Directory of Open Access Journals (Sweden)

    Alberto Arbasino

    2013-07-01

    Full Text Available In an issue that connects artistic creation with desire in many ways, we propose here the notoriously eccentric point of view of Šklovskij, through the re-reading a long conversation he had with Alberto Arbasino, published by “Il Giorno”, 13th October 1965. This is the original version of the interview: an extensively revised edition is included in the profile dedicated by Arbasino to Šklovskij in Sessanta posizioni, Milano, Feltrinelli, 1971, pp. 410-28.

  20. PREFACE: 13th International Conference on Liquid and Amorphous Metals

    Science.gov (United States)

    Popel, Pjotr; Gelchinskii, Boris; Sidorov, Valeriy; Son, Leonid; Sabirzjanov, Alexandre

    2007-06-01

    The state of the art in the field of liquid and amorphous metals and alloys is regularly updated through two series of complementary international conferences, the LAM (Liquid and Amorphous Metals) and the RQ (Rapidly Quenched Materials). The first series of the conferences started as LM-1 in 1966 at Brookhaven for the basic understanding of liquid metals. The subsequent LM conferences were held in Tokyo (1972) and Bristol (1976). The conference was renewed in Grenoble (1980) as a LAM conference including amorphous metals and continued in Los Angeles (1983), Garmisch-Partenkirchen (1986), Kyoto (1989), Vienna (1992), Chicago (1995), Dortmund (1998), Yokohama (2001) and Metz (2004). The conferences are mainly devoted to liquid and amorphous metals and alloys. However, communications on some non-metallic systems such as semi conductors, quasicrystals etc, were accepted as well. The conference tradition strongly encourages the participation of junior researchers and graduate students. The 13th conference of the LAM series was organized in Ekaterinburg, Russia, by the Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences (IMet UB RAS) and Ural State Pedagogical University (USPU) and held on 8-13 July 2007 under the chairmanship of Professors Pjotr Popel (USPU) and Boris Gelchinskii (IMet UB RAS). There were 242 active and about 60 guest participants from 20 countries who attended the conference. There were no parallel sessions and all oral reports were separated into three groups: invited talks (40 min), full-scale (25 min) and brief (15 min) oral reports. The program included 10 sessions, ranging from purely theoretical subjects to technological application of molten and amorphous alloys. The following sessions took place: A) Electronic structure and transport, magnetic properties; B) Phase transitions; C) Structure; D) Atomic dynamics and transport; E) Thermodynamics; F) Modelling, simulation; G) Surface and interface; H) Mechanical properties

  1. 13th International Conference on Computer Aided Engineering

    CERN Document Server

    Pietrusiak, Damian

    2017-01-01

    These proceedings of the 13th International Conference on Computer Aided Engineering present selected papers from the event, which was held in Polanica Zdrój, Poland, from June 22 to 25, 2016. The contributions are organized according to thematic sections on the design and manufacture of machines and technical systems; durability prediction; repairs and retrofitting of power equipment; strength and thermodynamic analyses for power equipment; design and calculation of various types of load-carrying structures; numerical methods for dimensioning materials handling; and long-distance transport equipment. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances in this dynamic field.

  2. The 13th Winter Conference on Medicinal and Bioorganic Chemistry.

    Science.gov (United States)

    Williams, Scott D

    2017-04-06

    The Medicinal and Bioorganic Chemistry Foundation (MBCF) hosted its 13 th biannual Winter Conference on Medicinal and Bioorganic Chemistry (WCMBC) this past January 22 nd -26 th in Steamboat Springs, Colorado (USA). The gathering this year kept true to the tradition of this conference series, with an impressive lineup of presenters from both academia and industry. With about 125 delegates, the conference took all the advantages of a mid-sized gathering: a sufficiently wide spectrum of scientists in attendance, yet an intimate atmosphere conducive to solid networking and frank, open discussions. This conference report summarizes the presentations that were given this year. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. 13th International Conference on Distributed Computing and Artificial Intelligence

    CERN Document Server

    Silvestri, Marcello; González, Sara

    2016-01-01

    The special session Decision Economics (DECON) 2016 is a scientific forum by which to share ideas, projects, researches results, models and experiences associated with the complexity of behavioral decision processes aiming at explaining socio-economic phenomena. DECON 2016 held in the University of Seville, Spain, as part of the 13th International Conference on Distributed Computing and Artificial Intelligence (DCAI) 2016. In the tradition of Herbert A. Simon’s interdisciplinary legacy, this book dedicates itself to the interdisciplinary study of decision-making in the recognition that relevant decision-making takes place in a range of critical subject areas and research fields, including economics, finance, information systems, small and international business, management, operations, and production. Decision-making issues are of crucial importance in economics. Not surprisingly, the study of decision-making has received a growing empirical research efforts in the applied economic literature over the last ...

  4. 13thInternational Conference on Computer and Information Science

    CERN Document Server

    Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing 2012

    2013-01-01

    The purpose of the 13th  International Conference on Computer and Information Science (SNPD 2012) held on August 8-10, 2012 in Kyoto, Japan was to bring together researchers and scientists, businessmen and entrepreneurs, teachers and students to discuss the numerous fields of computer science, and to share ideas and information in a meaningful way.  Our conference officers selected the best 17 papers from those papers accepted for presentation at the conference in order to publish them in this volume.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rounds of rigorous review.   The  conference organizers selected 17 outstanding papers from SNPD 2012, all of which you will find in this volume of Springer’s Studies in Computational Intelligence.

  5. Robotic refueling machine

    International Nuclear Information System (INIS)

    Challberg, R.C.; Jones, C.R.

    1996-01-01

    One of the longest critical path operations performed during the outage is removing and replacing the fuel. A design is currently under development for a refueling machine which would allow faster, fully automated operation and would also allow the handling of two fuel assemblies at the same time. This design is different from current designs, (a) because of its lighter weight, making increased acceleration and speed possible, (b) because of its control system which makes locating the fuel assembly more dependable and faster, and (c) because of its dual handling system allowing simultaneous fuel movements. The new design uses two robotic arms to span a designated area of the vessel and the fuel storage area. Attached to the end of each robotic arm is a lightweight telescoping mast with a pendant attached to the end of each mast. The pendant acts as the base unit, allowing attachment of any number of end effectors depending on the servicing or inspection operation. Housed within the pendant are two television cameras used for the positioning control system. The control system is adapted from the robotics field using the technology known as machine vision, which provides both object and character recognition techniques to enable relative position control rather than absolute position control as in past designs. The pendant also contains thrusters that are used for fast, short distance, precise positioning. The new refueling machine system design is capable of a complete off load and reload of an 872 element core in about 5.3 days compared to 13 days for a conventional system

  6. Research on constellation refueling based on formation flying

    Science.gov (United States)

    Bo, Xu; Feng, Quansheng

    2011-06-01

    A new scheme for refueling satellite constellation is proposed in this paper. Compared with the traditional research, where the satellite refueling is implemented through spacecraft rendezvous and docking, the new pattern studied here is based on formation flying, and it is more feasible, safer and more reliable. On the grounds of the proposed pattern, two refueling strategies are studied. The first is called single supplier refueling (SSR) based on formation flying. In this scenario, one fuel-sufficient satellite called a supplier, departs from its parking orbit, and after a series of orbit maneuvers, arrives at the target constellation that consists of multiple fuel-deficient satellites called workers. It then transfers equal fuel to each worker within the prescribed mission time. The second strategy is called double suppliers refueling (DSR) based on formation flying. This time two suppliers take charge of refueling half of the workers respectively in the same way as SSR. Using a genetic algorithm, the orbit of a supplier with a minimum consumption of fuel can be obtained once the mission time is fixed. Simulation results indicate that DSR is superior to SSR and that this dominance will be more distinct as the number of workers increases and the mission time decreases.

  7. First Bolgar Silver Dinars of 13th Century

    Directory of Open Access Journals (Sweden)

    Bugarchev Alexey I.

    2017-12-01

    Full Text Available The article considers silver coins minted in the first half of 13th century in the territory of Bolgar vilayet. All studied coins feature a theophoric name of Baghdad caliph al-Nasir li-din Allah. The author determined the existence of three types of Bolgar dinars and provides metrological parameters for each type of coins. Due to the fact that the year of coinage is not specified on the coins, the author suggests a relative sequence of the minting of the three coin types on the basis of a histogram study. The final date of the minting of Bolgar dinars with the name of An-Nasir is 1251. The author concludes that the presence of caliph an-Nasir’s name on the coins minted in Bolgar cannot be considered an argument in the discussion of their Pre-Mongol or Mongol origin. The dinars have a well-established typological consistency, which has allowed to determine a relative chronology of their minting.

  8. A 13th-century kettlehat from Kodasoo, Estonia

    Directory of Open Access Journals (Sweden)

    Mäll, Jaak

    2011-12-01

    Full Text Available The oldest surviving helmet from Estonia is a 13th-century kettlehat found near village of Kodasoo in northern Estonia. Three samples from different parts of the kettlehat were investigated in a metallographic study. The raw material of the Kodasoo kettlehat was a slag-rich iron of heterogeneous carbon content. It was improved by folding and forge-welding it at least three times, resulting in layered structure with more uniformly distributed carbon content.

    El casco más antiguo encontrado en Estonia es un «chapel de fer» del siglo XIII que proviene de cerca de la aldea de Kodasoo, en el Norte de Estonia. Tres muestras de diversas partes del casco fueron investigadas mediante un estudio metalográfico. El material original del casco de Kodasoo era un hierro de contenido de carbono heterogéneo y con abundantes inclusiones de escoria. Se intentó mejorar su calidad mediante forja, doblándolo y soldándolo a la calda por lo menos tres veces, dando como resultado una estructura estratificada, con el contenido de carbono distribuido más uniformemente.

  9. The 13th International Workshops on Opportunistic Protists (IWOP13).

    Science.gov (United States)

    Calderon, Enrique J; Cushion, Melanie T; Xiao, Lihua; Lorenzo-Morales, Jacob; Matos, Olga; Kaneshiro, Edna S; Weiss, Louis M

    2015-01-01

    The 13th International Workshops on Opportunistic Protists (IWOP-13) was held November 13-15, 2014 in Seville, Spain. The objectives of the IWOP meetings are to: (1) serve as a forum for exchange of new information among active researchers concerning the basic biology, molecular genetics, immunology, biochemistry, pathogenesis, drug development, therapy, and epidemiology of these immunodeficiency-associated pathogenic eukaryotic microorganisms that are seen in patients with AIDS and; (2) to foster the entry of new and young investigators into these underserved research areas. The IWOP meeting focuses on opportunistic protists; e.g. the free-living amoebae, Pneumocystis, Cryptosporidium, Toxoplasma, the Microsporidia, and kinetoplastid flagellates. This conference represents the major conference which brings together research groups working on these opportunistic pathogens. Progress has been achieved on understanding the biology of these pathogenic organisms, their involvement in disease causation in both immune deficient and immune competent hosts and is providing important insights into these emerging and reemerging pathogens. A continuing concern of the participants is the ongoing loss of scientific expertise and diversity in this research community. This decline is due to the small size of these research communities and an ongoing lack of understanding by the broader scientific community of the challenges and limitations faced by researchers working on these organisms, which makes these research communities very sensitive to declines in research funding. © 2015 The Author(s) Journal of Eukaryotic Microbiology © 2015 International Society of Protistologists.

  10. 13th International Conference on X-Ray Lasers

    CERN Document Server

    Gautier, Julien; Ros, David; Zeitoun, Philippe

    2014-01-01

    These proceedings comprise of invited and contributed papers presented at the 13th International Conference on X-Ray Lasers (ICXRL 2012) which was held 11–15 June 2012 in Paris, in the famous Quartier Latin, inside the historical Center of Cordeliers. This conference is part of a continuing series dedicated to recent developments and applications of x-ray lasers and other coherent x-ray sources with attention to supporting technologies and instrumentation. New results in the generation of intense, coherent x-rays and progress towards practical devices and their applications are reported in these proceedings, including areas of research in plasma-based x-ray lasers, 4th generation accelerator-based sources and higher harmonic generation. Recent achievements related to the increase of the repetition rate up to 100 Hz and shorter wavelength collisional plasma-based soft x-ray lasers down to about 7 nm are presented. Seeding the amplifying plasma with a femtosecond high-order harmonic of infrared laser was fore...

  11. 13th Workshop on What Comes Beyond the Standard Models

    CERN Document Server

    Nielsen, Holger Bech; Lukman, Dragan; What Comes Beyond the Standard Models

    2010-01-01

    1. Noncommutativity and Topology within Lattice Field Theories 2. The Construction of Quantum Field Operators 3. The Bargmann-Wigner Formalism for Spin 2 Fields 4. New Light on Dark Matter from the LHC 5. Extra Dimensional Metric Reversal Symmetry and its Prospect... 6. Masses and Mixing Matrices of Families within SU(3) Flavor Symmetry ... 7. Dark Atoms of the Universe: OHe Nuclear Physics, 8. Can the Matter-Antimatter Asymmetry be Easier to Understand Within the "Spin-charge-family-theory", .. 9. Mass Matrices of Twice Four Families of Quarks and Leptons, ...in the "Spin-charge-family-theory" 10. Bohmian Quantum Mechanics or What Comes Before the Standard Model 11. Backward Causation in Complex Action Model ... 12. Is the Prediction of the "Spin-charge-family-theory" in Disagreement with the XENON100..? 13. Masses and Mixing Matrices of Families of Quarks and Leptons Within the "Spin-charge-family-theory" 14. Can the Stable Fifth Family of the "Spin-charge-family-theory" ...Form the Fifth Antibaryon Cluster...

  12. Preliminary design considerations for automatic refueling at N Reactor

    International Nuclear Information System (INIS)

    Quapp, W.J.; Yount, J.A.

    1985-01-01

    The Refueling Enhancement Program is an effort to upgrade and improve the N Reactor refueling operation. Primary goals of this effort are to reduce personnel exposure, reduce effluents to the environment, and, where possible, increase the refueling rate. Recent advances in available commercial robotics systems have prompted a look at automating the Charge/Discharge (C/D) operations. Current efforts will culminate in a conceptual design report (CDR) and accompanying economic and risk analysis in January 1986. Based on the results in that report, DOE will review the viability of the approach as a future capital project. Implementation of automation in existing plants raises questions regarding both the programmatic (how does one implement such an effort) and technical (what equipment is available; how will it be applied) concerns. This paper addresses both aspects

  13. 13th International Conference on Films and Coatings

    International Nuclear Information System (INIS)

    2017-01-01

    Analytical Review of the Reports Presented at the 13th International Conference on Films and Coatings (ICFC13) V G Kuznetsov 1 and D K Kostrin 2 1 Institute of Problems of Mechanical Engineering, Russian Academy of Sciences, 199178, Saint Petersburg, Russia 2 Saint Petersburg Electrotechnical University “LETI”, 197376, Saint Petersburg, Russia E-mail: kvgipme@gmail.com Abstract. In this preface main trends in the development of films and coatings technology presented at the 13th International Conference on Films and Coatings (ICFC13) that was held on 18–20 April 2017 in Saint Petersburg, Russia are discussed. During the Conference were presented the results of theoretical and experimental research in the physics and mechanics of condensed matter, physics of low temperature plasma, formation of films and coatings using plasma and related methods that were obtained over the past two years that have passed since the previous meeting. Special attention was paid to the study of properties of surfaces and coatings, methods of their research, new coating materials, including nanomaterials, new areas of their application, development of modern equipment and technological processes, surface preparation and many other issues. During the Conference were presented more than 150 reports that were distributed in 8 sections: • vacuum ion-plasma methods; • thermal spray coating methods; • physical processes at all stages of coatings formation; • equipment for application of films and coatings; • materials for sputtering and deposition; • nanomaterials and nanotechnologies; • properties of coatings and films and methods of their evaluation; • preparation of surfaces before application and methods of post-processing of coatings and films. For the first time the Conference had a special section for young scientists, where presentations were made by students, postgraduates, candidates and doctors of science aged up to 35 years. Among the participants were

  14. Diablo Canyon refueling outage program

    International Nuclear Information System (INIS)

    McLane, W.B.; Irving, T.L.

    1991-01-01

    Management of outages has become one of the most talked about subjects in the nuclear power industry in the past several years. Many utilities do not perform refueling outages very well or in the past have had some outages that they would not like to repeat and in some cases do not even like to think about. With the growing cost of energy and the demands placed on utilities to improve capacity factors, it is very easy for management to focus on shortening refueling outage durations as a prime objective in improving overall corporate performance. So it is with Pacific Gas and Electric Company and the Diablo Canyon power plant. A review of their refueling outage performance reflects a utility that is responding to the nuclear industry's call for improved outage performance

  15. Support services to refuelling exploitation

    International Nuclear Information System (INIS)

    Castineira, M; Cortes, M.; Rayo, A.

    2010-01-01

    The refuelling period in nuclear power stations is very important due to the need to optimise its duration, large volumes of work and resources that have to be planned and coordinated and their impact on the subsequent operating cycle. Empresarios Agrupados has a permanent organisation, with specialised resources and extensive availability of human resources. (Author)

  16. Hydrant refueling system as an optimisation of aircraft refuelling

    Directory of Open Access Journals (Sweden)

    Martin HROMÁDKA

    2015-09-01

    Full Text Available At large international airports, aircraft can be refuelled either by fuel trucks or using dedicated underground pipeline systems. The latter, hydrant refuelling, is considered to be an optimal fuelling method as it increases safety, shortens the aircraft turnaround time and cuts the overall costs. However, at smaller airports, implementation of this system can lead to high investment costs. Thus, the paper discusses the airport size from which this system may be efficient to implement. Various definitions of term “airport size” are assessed. Based on data collection, the hydrant system model is created within the paper. As a result, methodology for assessing the suitability of hydrant system implementation is set. This methodology can be used at every airport using three simple inputs.

  17. Pellet refueling program at Risoe

    International Nuclear Information System (INIS)

    Andersen, V.; Chang, C.T.; Joergensen, L.W.; Nielsen, P.; Sillesen, A.H.

    1978-01-01

    The pellet refueling work at Riso has up to now been concentrated at studying the ablation rate of hydrogen pellets in hydrogen and deuterium plasmas in the Puffatron device. The main results of these studies are well known and we shall only give a brief summary including some more recent results relating to the ablation process. The work on the Puffatron device has been completed and we are presently preparing to start ablation studies in a small Tokamak, Dante. This tokamak has only been constructed this summer and ablation studies are expected to begin in the beginning of 1978. We shall give the expected parameters of the tokamak plasma and indicate some of the planned work. In this presentation we shall also report on the theoretical work on refueling taking place at Riso. We have particularly been interested in the effect of α-particles which could significantly alter the conclusions made from present experiments

  18. Automated refueling inventory control system at FFTF

    International Nuclear Information System (INIS)

    Ordonez, C.R.

    1983-10-01

    The Refueling Inventory Control System (RICS) at the Fast Flux Test Facility (FFTF) keeps track of all assemblies that reside in the various refueling facilities. The automated RICS allows the user to obtain information regarding any assembly under its control by displaying the data on a screen. It also provides a simulation mode which allows assembly moves on a duplicated data base. This simulation is used to verify the refueling documentation before it is issued

  19. Improving refueling outages through partnership

    International Nuclear Information System (INIS)

    Mercado, Angelo L.

    2004-01-01

    This paper describes an approach to reduce nuclear plant outage duration and cost through partnership. Partnership is defined as a long-term commitment between the utility and the vendor with the objective of achieving shared business goals by maximizing the effectiveness of each party's resources. The elements of an effective partnership are described. Specific examples are given as to how partnership has worked in the effective performance of refueling outages. To gain the full benefits of a partnership, both parties must agree to share information, define the scope early, communicate goals and expectations, and identify boundaries for technical ownership. (author)

  20. Compact toroid refueling of reactors

    International Nuclear Information System (INIS)

    Gouge, M.J.; Hogan, J.T.; Milora, S.L.; Thomas, C.E.

    1988-04-01

    The feasibility of refueling fusion reactors and devices such as the International Thermonuclear Engineering Reactor (ITER) with high-velocity compact toroids is investigated. For reactors with reasonable limits on recirculating power, it is concluded that the concept is not economically feasible. For typical ITER designs, the compact toroid fueling requires about 15 MW of electrical power, with about 5 MW of thermal power deposited in the plasma. At these power levels, ideal ignition (Q = ∞) is not possible, even for short-pulse burns. The pulsed power requirements for this technology are substantial. 6 ref., 1 figs

  1. 13th EU-US Transport Task Force Workshop on transport in fusion plasmas

    DEFF Research Database (Denmark)

    Connor, J.W.; Fasoli, A.; Hidalgo, C.

    2009-01-01

    This report summarizes the contributions presented at the 13th EU-US Transport Task Force Workshop on transport in fusion plasmas, held in Copenhagen, Denmark, 1-4 September 2008. There were sessions on core heat and particle transport; core and edge momentum transport; edge and scrape-off-layer ......This report summarizes the contributions presented at the 13th EU-US Transport Task Force Workshop on transport in fusion plasmas, held in Copenhagen, Denmark, 1-4 September 2008. There were sessions on core heat and particle transport; core and edge momentum transport; edge and scrape...

  2. The 2001 January 13th M {W}7.7 and February 13th M {W}6.6 El Salvador Earthquakes: Deformation and Stress Triggering

    Science.gov (United States)

    Hreinsdóttir, S.; Freymueller, J. T.

    2001-12-01

    On the 13th of January 2001, an M {W} 7.7 normal fault earthquake occurred offshore El Salvador. The earthquake occurred in the subducting Cocos plate and was followed by high seismic activity and several earthquakes exceeding magnitude 5. On the 13th of February, an M {W} 6.6 strike slip earthquake occurred in the overriding Caribbean plate, about 75 km NNW from the epicenter of the large January earthquake. Deformation due to these earthquakes was observed at six continuous CORS GPS stations in Central America. In the M {W} 7.7 earthquake about 10 mm displacement was measured at GPS stations in El Salvador and Honduras. A smaller but significant dispacement was also observed at GPS stations in Nicaragua, more then 200 km from the earthquake's epicenter. In the M {W} 6.6 earthquake 41+/- 1 mm displacement in direction N111oE was measured at the GPS station in San Salvador, El Salvador. Other CORS GPS stations were not affected by that earthquake. A postsesmic signal is detectable at the San Salvador GPS station, strongest right after the earthquake and then decays. On average we see 0.3 +/- 0.1 mm/day of SSW motion of the station in the first twenty days following the earthquake. Using seismic and geodetic data, we calculated Coulomb stress changes following the January 13th, M {W} 7.7 earthquake. Of special interest were six 5.4 earthquake that occurred in the overriding Caribean plate. The location and focal mechanism of these earthquakes correlate with areas of calculated increase in static stress thus indicating stress triggering. The thrust events occurred 2 to 20 days after the M {W} 7.7 earthquake, in increasing distance from the M {W} 7.7 event with time.

  3. Method for refuelling a nuclear reactor core

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    This invention relates to an improved method for refuelling a nuclear reactor core inside a reactor vessel. The technique allows a substantial reduction in the refuelling time as compared with previously known methods and permits fewer out of core operations and smaller temporary storage space. (U.K.)

  4. Refueling machine for a nuclear reactor

    International Nuclear Information System (INIS)

    Kowalski, E.F.; Hornak, L.P.; Swidwa, K.J.

    1981-01-01

    An improved refuelling machine for inserting and removing fuel assemblies from a nuclear reactor is described which has been designed to increase the reliability of such machines. The system incorporates features which enable the refuelling operation to be performed more efficiently and economically. (U.K.)

  5. The 13th World Health Congress has been conducted between April ...

    African Journals Online (AJOL)

    admin

    1 School of Public Health, Addis Ababa University, Addis Ababa, Ethiopia. EDITORIAL. Fostering public health leadership in Africa. Damen Haile Mariam1. The 13th. World Health Congress has been conducted between April 23-27, 2012 in Addis. Ababa and the Ethiopian Public Health. Association (EPHA) has ...

  6. Policy Recommendations from the 13th ICABR Conference on the Emerging Bioeconomy

    NARCIS (Netherlands)

    Smyth, S.J.; Falck-Zepeda, J.B.; Gray, R.S.; Nassem, A.; Paarlberg, R.; Phillips, P.W.B.; Pray, C.E.; Savastano, S.; Scandizzo, P.; Scatasta, S.; Wesseler, J.H.H.; Zilberman, D.

    2010-01-01

    The International Consortium on Agricultural Biotechnology Research held its 13th annual conference in Ravello, Italy in June 2009. The theme of the conference was the bioeconomy, and this topic was addressed through research presentations from academia, government, and industry. Numerous

  7. Abstracts of 13th International Congress on Plasma Physics (ICPP 2006). Published in 2 volumes

    International Nuclear Information System (INIS)

    Anon

    2006-01-01

    This report contains the presentation on the 13-th International Congress on Plasma Physics (ICPP 2006). Five main topics are covered: fundamental problems of plasma physics; fusion plasmas; plasmas in astrophysics and space physics; plasmas in applications and technologies; complex plasmas

  8. Abstracts of 13th International Congress on Plasma Physics (ICPP 2006). Published in 2 volumes

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    2006-07-01

    This report contains the presentation on the 13-th International Congress on Plasma Physics (ICPP 2006). Five main topics are covered: fundamental problems of plasma physics; fusion plasmas; plasmas in astrophysics and space physics; plasmas in applications and technologies; complex plasmas.

  9. 78 FR 68443 - Filing Dates for the Florida Special Elections in the 13th Congressional District

    Science.gov (United States)

    2013-11-14

    ... 13th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for... Primary and the Special General Election on March 11, 2014, shall file a 12-day Pre-Primary Report, 12-day... committees of candidates who participate in the Florida Special Primary and Special General Elections shall...

  10. Acute coronary syndrome on Friday the 13th: a case for re-organising services?

    Science.gov (United States)

    Protty, Majd B; Jaafar, Mustafa; Hannoodee, Sahar; Freeman, Phillip

    2016-12-12

    Friday the 13th is described as an "unlucky" day that brings misfortune. There are few studies on the question, and none on its effect in cardiovascular patients. The recently misreported "weekend effect" has led to changes in the junior doctor contract in England, providing greater staffing levels on weekends. Should we make similar provisions for Friday the 13th? A retrospective analysis of a large database for patients admitted to hospitals in South Wales with an acute coronary syndrome (ACS) during 1999-2014. Mortality rates for 217 admission day number/name combinations and for Friday the 13th were compared in a Cox proportional hazards regression model. 56 062 ACS patients were identified. There were no significant differences in 13-year mortality between most admission dates (211 of 216) and Friday the 13th. However, a statistically significant reduction in mortality was identified for five dates: Thursday the 15th (HR, 0.77; 95% CI, 0.59-0.999), Wednesday the 18th (HR, 0.76; 95% CI, 0.58-0.99), Monday the 28th (HR, 0.76; 95% CI, 0.57-0.99), Monday the 30th (HR, 0.75; 95% CI, 0.57-0.99) and Tuesday the 31st (HR, 0.71; 95% CI, 0.51-0.99). On most days, there was no difference in the 13-year mortality rate for patients admitted with their first ACS from that for "unlucky" Friday the 13th. However, patients admitted on five day/number combinations were 20-30% more likely to survive at 13 years. These findings could be explained by subgroup analysis inflation of the type I error, although supernatural causes merit further investigation. Our findings should be taken into account in future junior doctor contract negotiations, and may provide a case for reduced staffing levels on these lucky days.

  11. Females do not have more injury road accidents on Friday the 13th

    Directory of Open Access Journals (Sweden)

    Summala Heikki

    2004-11-01

    Full Text Available Abstract Background This study reinvestigated the recent finding that females – but not males – die in traffic accidents on Friday the 13th more often than on other Fridays (Näyhä S: Traffic deaths and superstition on Friday the 13th. Am J Psychiatry 2002, 159: 2110–2111. The current study used matched setting and injury accident data base that is more numerous than fatality data. If such an effect would be caused by impaired psychic and psychomotor functioning due to more frequent anxiety among women, it should also appear in injury crashes. Methods We used the national Finnish road accident database for 1989–2002. To control seasonal variation, 21 Fridays the 13th were compared in a matched design to previous and following Fridays, excluding all holidays, on number of accidents, male/female responsibility for accidents, and the number of dead, injured and overall number of active participants (drivers, pedestrians and bicyclists as a consequence of the accident. Results There were no significant differences in any examined aspect of road injury accidents among the three Fridays, either in females or males. Women were not overrepresented in crashes that occurred on Fridays 13th. Conclusion There is no consistent evidence for females having more road traffic crashes on Fridays the 13th, based on deaths or road accident statistics. However, this does not imply a non-existent effect of superstition related anxiety on accident risk as no exposure-to-risk data are available. People who are anxious of "Black Friday" may stay home, or at least avoid driving a car.

  12. ASDEX papers at the 13th European conference on controlled fusion and plasma physics

    International Nuclear Information System (INIS)

    1986-05-01

    This report provides 29 ASDEX papers concerning pellet refuelling, confinement, high-beta plasma and MHD-equilibrium, heating by ICR, lower hybrid and current-drive, impurity studies and plasma diagnostics. All of these papers have been indexed separately. (GG)

  13. Enhanced methods for operating refueling station tube-trailers to reduce refueling cost

    Science.gov (United States)

    Elgowainy, Amgad; Reddi, Krishna

    2017-08-22

    A method and apparatus are provided for operating a refueling station including source tube-trailers and at least one compressor to reduce refueling cost. The refueling station includes a gaseous fuel supply source including a plurality of tanks on a tube trailer coupled to a first control unit, and high pressure buffer storage having predefined capacity coupled to a second control unit and the first tanks by a pressure control valve and the first control unit, and at least one compressor. The refueling station is operated at different modes depending on a state of the refueling station at the beginning of each operational mode. The refueling system is assessed at the end of each operational mode to identify the state of the system and select a next mode of operation. The operational modes include consolidating hydrogen, or any gaseous fuel, within the tubes mounted on the trailer.

  14. Rural Transformation and Planning Tactics in the 13th Five-Year Plan Period

    Institute of Scientific and Technical Information of China (English)

    Luo; Xiaolong; Xu; Xiao; Li; Min

    2016-01-01

    Rural development has long been the focus of China’s central and local governments. Since the late 2000 s, rural areas have presented new transformation features and development trends. To stimulate rural transformation and development in the 13 th Five-Year Plan period, this paper reviews major ideas on rural development in related disciplines. This study also summarizes main rural transformation features, including the aging population, hollow villages, changes in the allocation of land resource, semi-urbanization, and regional differences in rural development. Finally, it also provides suggestions for planning tactics in the 13 th Five-Year Plan period, such as making differentiated rural development strategies, exploring new methods to stimulate rural stock land planning and use, and enforcing relevant policy and management reforms.

  15. Rural Transformation and Planning Tactics in the 13th Five-Year Plan Period

    Institute of Scientific and Technical Information of China (English)

    Luo Xiaolong; Xu Xiao; Li Min

    2016-01-01

    Rural development has long been the focus of China's central and local governments.Since the late 2000s,rural areas have presented new transformation features and development trends.To stimulate rural transformation and development in the 13th Five-Year Plan period,this paPer reviews major ideas on rural development in related disciplines.This study also summarizes main rural transformation features,including the aging population,hollow villages,changes in the allocation of land resource,semi-urbanization,and regional differences in rural development.Finally,it also provides suggestions for planning tactics in the 13th Five-Year Plan period,such as making differentiated rural development strategies,exploring new methods to stimulate rural stock land planning and use,and enforcing relevant policy and management reforms.

  16. 13th : THE BLACK AND WHITE OF THE AMERICAN PRISON SYSTEM

    OpenAIRE

    Shamasha, Marim

    2017-01-01

    The purpose of this thesis is to examine what facts the documentary 13th presents and how they are portrayed filmically. By conducting, both, a discourse analysis and a neoformalist film analysis those two factors can be fully examined. And by later adding the three theoretical perspectives of discourse analysis, hegemony, and neoformalist film theory, the results of the analyses can be discussed in a way that covers both the narrative part of the film and the aesthetic and stylistic ones.The...

  17. Overseas Voter Mobilisation in Singapore: Implications from Malaysia’s 13th General Election

    OpenAIRE

    James Gomez; Rusdi Omar

    2013-01-01

    "This paper discusses voter mobilisation and other election-related activities of Malaysian voters living, studying and working in Singapore in the context of Malaysia's 13th general election (GE13). According to the World Bank, nearly 400,000 Malaysians reside in the city-state. Thus these figures represent a significant Malaysian voter pool based in Singapore. Efforts to mobilise these voters for general elections or other causes have political implications for both countries, which became ...

  18. Refueling and control of RFP burns

    International Nuclear Information System (INIS)

    Nebel, R.; Miley, G.H.

    1978-01-01

    An earlier study of the stability of a fusion burn in a Reversed Field Pinch (RFP) has been extended to include cold particle refueling. This refueling, coupled with anomalous transport, makes possible quasi-steady state operation which both flattens the wall-loading temporal dependence and significantly increases energy gain factors. This paper discusses results of these burn simulations along with parametric studies aimed at determining associated reactor scaling problems

  19. Pellets for fusion reactor refueling. Annual progress report, 1 January 1975--31 December 1975

    International Nuclear Information System (INIS)

    Turnbull, R.J.

    1976-01-01

    The feasibility of refueling fusion reactors using pellets of deuterium-tritium is discussed. A pellet injector has been constructed and experiments have been done injecting solid pellets into the ORMAK machine. Theoretical explanations of the results from these experiments have been successful. Other experiments underway include techniques for charging the pellets in order to accelerate and control them

  20. Pellets for fusion reactor refueling. Annual progress report, January 1, 1976--December 31, 1976

    International Nuclear Information System (INIS)

    Turnbull, R.J.; Kim, K.

    1977-01-01

    The purpose of this research is to test the feasibility of refueling fusion reactors using solid pellets composed of fuel elements. A solid hydrogen pellet generator has been constructed and experiments have been done to inject the pellets into the ORMAK Tokamak. A theory has been developed to describe the pellet ablation in the plasma, and an excellent agreement has been found between the theory and the experiment. Techniques for charging the pellets have been developed in order to accelerate and control them. Other works currently under way include the development of techniques for accelerating the pellets for refueling purpose. Evaluation of electrostatic acceleration has also been performed

  1. Hydrogen Production for Refuelling Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hulteberg, Christian; Aagesen, Diane (Intelligent Energy, Long Beach, CA (United States))

    2009-08-15

    The aim of this work is to support the development of a high-profile demonstration of hydrogen generation technologies in a Swedish context. The overall objective of the demonstration is to deploy a reforming based hydrogen refilling station along the Swedish west coast; intermediate to the Malmoe refuelling station and planned stations in Goeteborg. In this way, the Norwegian hydrogen highway will be extended through the south of Sweden and down into Denmark. The aim of the project's first phase, where this constitutes the final report, was to demonstrate the ability to operate the IE reforming system on the E.On/SGC site-specific fuel. During the project, a preliminary system design has been developed, based on IE's proprietary reformer. The system has been operated at pressure, to ensure a stable operation of the downstream PSA; which has been operated without problems and with the expected hydrogen purity and recovery. The safe operation of the proposed and tested system was first evaluated in a preliminary risk assessment, as well as a full HazOp analysis. A thorough economic modelling has been performed on the viability of owning and operating this kind of hydrogen generation equipment. The evaluation has been performed from an on-site operation of such a unit in a refuelling context. The general conclusion from this modelling is that there are several parameters that influence the potential of an investment in a Hestia hydrogen generator. The sales price of the hydrogen is one of the major drivers of profitability. Another important factor is the throughput of the unit, more important than efficiency and utilization. Varying all of the parameters simultaneously introduce larger variations in the NPV, but 60% of the simulations are in the USD 90 000 to USD 180 000 interval. The chosen intervals for the parameters were: Hydrogen Sales Price (USD 5 - USD 7 per kg); Investment Cost (USD 70 000 - USD 130 000 per unit); Throughput (20 - 30 kg

  2. Generics, Supergenerics and Patent Strategies--SMi's 13th Annual Meeting.

    Science.gov (United States)

    Edwards, Catherine

    2010-07-01

    SMi's 13th Annual Meeting on Generics, Supergenerics and Patent Strategies, held in London, included topics covering new trends in the generics field, the difficulties faced by companies in entering the generics market and recent developments in IP. This conference report highlights selected presentations on generics in India, protecting pharmaceutical products in China, changes in generics law and litigation in the US and Europe, challenges for market selection and entry for generics companies, the influence of changes in the healthcare market on the generics industry, supergenerics, and biosimilars.

  3. Feminine anthroponyms in 13th-century Scotland: the Ragman Roll (1296

    Directory of Open Access Journals (Sweden)

    Valeria Di Clemente

    2012-10-01

    Full Text Available The documents known as Ragman Roll collect the fealty oaths sworn and the homages rendered by Scottish nobility, clergy, landowners and burgesses to Edward I Plantagenet after the English invasion of Scotland in the spring and summer of 1296. These documents record personal names and surnames of ca. 1800 people, being a precious source for the study of Scottish anthroponymy in the second half of the 13th century. This paper focuses on the feminine anthroponyms occurring in the Ragman Roll, on their form and on their historical-etymological and cultural background.

  4. RFSP simulations of Darlington FINCH refuelling transient

    International Nuclear Information System (INIS)

    Carruthers, E.V.; Chow, H.C.

    1997-01-01

    Immediately after refuelling of a channel, the fresh bundles are free of fission products. Xenon-135, the most notable of the saturating fission products, builds up to an equilibrium level in about 30 h. The channel power of the refuelled channel would therefore initially peak and then drop to a steady-state level. The RFSP code can track saturating-fission-product transients and power transients. The Fully INstrumented CHannels (FINCHs) in Darlington NGS provides channel power data on the refuelling power transients. In this paper, such data has been used to identify the physical evidence of the fission-product transient effect on channel power, and to validate RFSP fission-product-driver calculation results. (author)

  5. The ultrasonographic diagnosis of fetal encephalocele at 13th gestational week

    Directory of Open Access Journals (Sweden)

    Šorak Marija

    2010-01-01

    Full Text Available Background. Encephalocele presents a rare anomaly of central nervous system, developed as a consequence of neural tube closing defect during early embrional development, and it is described by a baggy formation which prolaborates through the pores of the scull, filled with brain tissue, cerebrospinal liquor and entwined with meninges. According to literature search, until this day, the earliest it can be ultrasonically detected is the 13th gestation week, with the appliance of three-dimensional ultrasound. Case report. We presented 25 years old patient, ultrasonically diagnosed with occipital fetal encephalocela at the 13th gestation week. A gestation sack was located in the right uteral corn of the two-corned uterus with one cervix. The diagnosis was confirmed also by trippled value of alpha-fetoprotein in maternal serum: 75,98 IU/mL. Conclusion. Ultrasonic examination is the method of choice for prenatal detection of a fetal anomaly. It is possible to diagnose encephalocele if it prominates above the limits of the scull.

  6. Trepanation to Treat a Head Wound: A Case of Neurosurgery from 13th-Century Tuscany.

    Science.gov (United States)

    Riccomi, Giulia; Fornaciari, Gino; Vitiello, Angelica; Bini, Anna; Caramella, Davide; Giuffra, Valentina

    2017-08-01

    During the archaeological excavations conducted in the 13th century cemetery of the Church of Sant'Agostino in Poggibonsi (Tuscany, Italy), a skull with evidence of neurosurgical intervention was brought to light. The skull, belonging to an adult male, shows two traumatic lesions produced by bladed instruments. The first lesion, located on the anterior part of the parietal bones, involved only the outer cranial table; bone remodeling indicates that the individual survived the injury for a long time. The second lesion, located on the frontal bone, involved all the thickness of the bone; the absence of reparative processes allows a diagnosis of peri mortem lesion. To treat this wound, the patient underwent surgical intervention. In fact, in correspondence to the lesion, an oval bone loss, with clean and well-defined cutting edges, can be interpreted as the result of a trepanation, probably performed to clean the wound and to remove any bone splinters. Half of the bone "rondella" was found in situ; it can be hypothesized that the surgeon decided to replace the bony piece to protect the brain. However, the surgical intervention failed, and the patient died soon afterwards. Trepanation for the treatment of cranial traumas is described by several medical classical and medieval authors, whose texts were available in the 13th century. This case represents rare Middle Ages evidence of neurosurgery used to treat a bone injury. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Report of the 13th IEA workshop on radiation effects in ceramic insulators

    International Nuclear Information System (INIS)

    2004-03-01

    The 13th IEA Workshop on Radiation Effects in Ceramic Insulators, based on Annex II: Experimentation on Radiation Damage in Fusion Materials, to the IEA Implementing Agreement for a Programme of Research and Development on Radiation Damage in Fusion Materials, was held on the 9th, December, 2003, at Kyoto International Conference Center, in Kyoto, Japan, in conjunction with the 11th International Conference on Fusion Reactor Materials (ICFRM-11). 44 participants from 10 countries (26 from Japan, 5 from Spain, 3 from Belgium, 3 from USA, 2 from RF, each 1 from Austria, Greece, Italy, Romania, and UK) gathered together and discussed following issues extensively, with the newest experimental results, after the welcome remarks by one of the organizer and chairpersons, Dr. E.R. Hodgson of CIEMAT. Effects of electric field on radiation induced microstructural evolution, parasitic electrical current and voltage induced in cables and wires by radiation effects, optical materials, IFMIF related issues and fundamental aspects were discussed. Significant results such as an observation of γ-alumina and aluminum colloid formation for the Radiation Induced Electrical Degradation mechanism are obtained. This report is workshop summary, abstracts and documents of the 13th IEA Workshop on Radiation Effects in Ceramic Insulators. (author)

  8. Refueling machine with relative positioning capability

    International Nuclear Information System (INIS)

    Challberg, R.C.; Jones, C.R.

    1998-01-01

    A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs

  9. Refueling machine with relative positioning capability

    Science.gov (United States)

    Challberg, R.C.; Jones, C.R.

    1998-12-15

    A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs.

  10. Moved range monitor of a refueling machine

    International Nuclear Information System (INIS)

    Nakajima, Masaaki; Sakanaka, Tadao; Kayano, Hiroyuki.

    1976-01-01

    Purpose: To incorporate light receiving and emitting elements in a face monitor to thereby increase accuracy and reliability to facilitate handling in the refueling of a BWR power plant. Constitution: In the present invention, a refueling machine and a face monitoring light receiving and emitting elements are analogously coupled whereby the face monitoring light receiving and emitting elements may be moved so as to be analogous to a route along which the refueling machine has moved. A shielding plate is positioned in the middle of the light receiving and emitting elements, and the shielding plate is machined so as to be outside of action. The range of action of the refueling machine may be monitored depending on the light receiving state of the light receiving element. Since the present invention utilizes the permeating light as described above, it is possible to detect positions more accurately than the mechanical switch. In addition, the detection section is of the non-contact system and the light receiving element comprises a hot cell, and therefore the service life is extended and the reliability is high. (Nakamura, S.)

  11. 13th New Mexico Analysis Seminar & Western Spring Sectional Meeting of the AMS

    CERN Document Server

    Marcantognini, Stefania; Stokolos, Alexander; Urbina, Wilfredo; Harmonic analysis, partial differential equations, complex analysis, Banach spaces, and operator theory : celebrating Cora Sadosky's life

    2016-01-01

    Covering a range of subjects from operator theory and classical harmonic analysis to Banach space theory, this book contains survey and expository articles by leading experts in their corresponding fields, and features fully-refereed, high-quality papers exploring new results and trends in spectral theory, mathematical physics, geometric function theory, and partial differential equations. Graduate students and researchers in analysis will find inspiration in the articles collected in this volume, which emphasize the remarkable connections between harmonic analysis and operator theory. Another shared research interest of the contributors of this volume lies in the area of applied harmonic analysis, where a new notion called chromatic derivatives has recently been introduced in communication engineering. The material for this volume is based on the 13th New Mexico Analysis Seminar held at the University of New Mexico, April 3-4, 2014 and on several special sections of the Western Spring Sectional Meeting at th...

  12. Construction of War Discourse on International News Agencies: Case Study Terrorist attacks November 13th 2015

    Directory of Open Access Journals (Sweden)

    Ángel TORRES-TOUKOUMIDIS

    2017-01-01

    Full Text Available This study analyzes warmongering rhetoric presented by international agencies Reuters, Al Arabiya, Al Jazeera and Associated Press (AP of the information related to the terrorist attacks in Paris on November 13th, 2015 for 15 days after the event. We have started from a quantitative and qualitative analysis of 550 information units using the software MAXQDA (v. 11.0.11. Subsequently, the semantic criteria of media discourse: functionality, significance and direction of the goal was applied on the selected sample. The results demonstrate the prevailing demonization of Islam, the exaltation of fear and panic in the discursive construction and it highlighted the spectacle of the information as a communicative strategy on the rhetorical guidance.

  13. 13th Workshop on Crystalline Silicon Solar Cell Materials and Processes: Extended Abstracts and Papers

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.; Rand, J.; Saitoh, T.; Sinton, R.; Stavola, M.; Swanson, D.; Tan, T.; Weber, E.; Werner, J.; Al-Jassim, M.

    2003-08-01

    The 13th Workshop will provide a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. It will offer an excellent opportunity for researchers in private industry and at universities to prioritize mutual needs for future collaborative research. The workshop is intended to address the fundamental aspects of impurities and defects in silicon: their properties, the dynamics during device processing, and their application for developing low-cost processes for manufacturing high-efficiency silicon solar cells. A combination of oral, poster, and discussion sessions will review recent advances in crystal growth, new cell structures, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands.

  14. 13th Workshop on Radiation Monitoring for the International Space Station - Final Program

    International Nuclear Information System (INIS)

    2008-01-01

    The Workshop on Radiation Monitoring for the International Space Station (WRMISS) has been held annually since 1996. The major purpose of WRMISS is to provide a forum for discussion of technical issues concerning radiation dosimetry aboard the International Space Station. This includes discussion of new results, improved instrumentation, detector calibration, and radiation environment and transport models. The goal of WRMISS is to enhance international efforts to provide the best information on the space radiation environment in low-Earth orbit and on the exposure of astronauts and cosmonauts in order to optimize the radiation safety of the ISS crew. During the 13 th Annual WRMISS, held in the Institute of Nuclear Physics (Krakow, Poland) on 8-10 September 2008, participants presented 47 lectures

  15. 13th International conference on environmental degradation of materials in nuclear power systems

    International Nuclear Information System (INIS)

    2007-01-01

    The 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems was held on August 19-23, 2007 in Whistler, British Columbia, Canada. More of a scientific meeting than a convention, this conference series is the premier nuclear industry corrosion meeting where the 225 registrations consisted of world experts of the field from utilities, engineering and service organizations, manufacturers, research establishments and universities gathered to listen to 144 technical papers on new work and to explore new insights into corrosion mechanisms in the many water cooled systems in nuclear power plants. Over 225 delegates attended the conference, over 144 technical papers were presented in the following sessions: IASCC; Waste; PWR Secondary; Ni-Base Welds; Operating Experience; Low Alloy Steels; Alloy 800 Steam Generator Tubing; Zirconium Alloys; Crack Growth; SCWR; PWR Primary; BWR SCC; Irradiation Effects; Flow Accelerated Corrosion; and, Nobel Metal

  16. City state institutions under municipal or family rule in 13th-century Alessandria

    Directory of Open Access Journals (Sweden)

    Alberto Luongo

    2011-11-01

    Full Text Available In the 13th century many attempts were made to set up personal rule over Alessandria, with varying degrees of success. The first was Manfredi II Lancia, viceroy of Emperor Frederick II. This was followed by Guglielmo VII of Monferrato, whose plans were opposed initially by Oberto Pelavicino and subsequently by Carlo of Angiò. Dominion over Alessandria actively involved the population and the dignitaries of the city (divided by loyalty to the rival Lanzavecchia and Del Pozzo families. They were able to establish or end the rule of one family or another. Hence, the political élite of Alessandria took advantage of the aspirations of foreign rulers to solve internal problems, by according them with different powers as the situation demanded and as the loyalties of the rival factions changed.

  17. 13th International Symposium on Distributed Computing and Artificial Intelligence 2016

    CERN Document Server

    Semalat, Ali; Bocewicz, Grzegorz; Sitek, Paweł; Nielsen, Izabela; García, Julián; Bajo, Javier

    2016-01-01

    The 13th International Symposium on Distributed Computing and Artificial Intelligence 2016 (DCAI 2016) is a forum to present applications of innovative techniques for studying and solving complex problems. The exchange of ideas between scientists and technicians from both the academic and industrial sector is essential to facilitate the development of systems that can meet the ever-increasing demands of today’s society. The present edition brings together past experience, current work and promising future trends associated with distributed computing, artificial intelligence and their application in order to provide efficient solutions to real problems. This symposium is organized by the University of Sevilla (Spain), Osaka Institute of Technology (Japan), and the Universiti Teknologi Malaysia (Malaysia).

  18. 13th North American Caribou Workshop, 25-28 October 2010, Winnipeg, Manitoba, Canada.

    Directory of Open Access Journals (Sweden)

    Rolf Egil Haugerud (editor in chief

    2012-03-01

    Full Text Available The 13th North American Caribou Workshop which was held in Winnipeg, Manitoba, was a great success with more than 400 participants: people from Canada, the United States, Norway and Greenland, representatives from co-management and resource management boards across North America, First Nations, Inuit and Inuvialuit, governmental and non-governmental organisations, private companies, researchers, students and youth. The theme of the Workshop was Sustaining Caribou and their Landscapes – Knowledge to Action and the intent of the organizers was twofold: first, to provide participants with the opportunity to share scientific and traditional knowledge on different subspecies and ecotypes of Rangifer across the circumpolar North, the particularities of the different landscapes and land use management issues; second, to explore innovative ways to transfer knowledge to action, ensuring the long-term persistence of Rangifer throughout its range through the development of better governance structures, sound policies and effective communication.

  19. The 13th International Workshop on Targetry and Target Chemistry Proceedings

    DEFF Research Database (Denmark)

    Haroun, Samar; Givskov, Alex David; Jensen, Mikael

    in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal......This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risø National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production...... of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring...

  20. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  1. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  2. Early Mongols – the Ethno-Political History to the 13th Century

    Directory of Open Access Journals (Sweden)

    Nenad Vidaković

    2015-04-01

    Full Text Available The paper examines the etnogenesis of the Mongol tribes from the period of the Rouran and Shiwei tribal alliances to the unification in the early 13th century under Genghis Khan’s leadership. The initial period of the ethnogenesis of medieval Mongols’ ancestors is associated with Rouran and Shiwei tribal alliances while news about them are written in Chinese dynastic chronicles. Within the Shiwei association there was the Mengwu tribe that inhabited forest expanses of north-western Manchuria, and the Argun river basin is considered to be the original homeland of the Mongols. The directions and time of migration processes which played an important role in the transformation of part of Mongol tribes from forest hunters to steppe nomads have been further investigated. The ethnic history of the Mongol tribes is closely associated with the Turkic and Tungus-Manchurian tribes. The Turkic tribes, that inhabited the steppes of Mongolia today, had a crucial importance in the development of Mongol nomadic tribes, while the Tungus-Manchu and northern Mongol tribes shared forest expanses of Manchuria and Trans-Baikal. The following text describes the events in the Turkic khaganates and kingdoms in the north of China, which influenced the historical development of the Mongol tribes. The period of the Qidan Liao dynasty (10th ‒ 12th century is of great importance because the core of the Mongol nomadic tribes was formed at that time in the northeastern Mongolia, that were gradually spreading over the steps to the west. During the Jurchen Jin dynasty (12th ‒ 13th century the importance of the Mongol tribes in the steppe increased. The attempts of political unification of the Mongols appeared during that period – for the first time in the mid-12th century, during the reign of Khabul Khan. The final part of the paper describes the struggle of Temujin (Temüjin, the future Genghis Khan, for the unification of the Mongol-Turkic tribes. After victory over

  3. 13th European Workshop on Advanced Control and Diagnosis (ACD 2016)

    International Nuclear Information System (INIS)

    2017-01-01

    13 th European Workshop on Advanced Control and Diagnosis The 13th European Workshop on Advanced Control and Diagnosis (ACD 2016), www.acd2016.eu took place at Hautes Etrudes d’Ingénieur (HEI), Lille, France, on November 17-18, 2016. The annual European Workshop on Advanced Control and Diagnosis has been organized since 2003 by Control Engineering departments of several European universities in Germany, France, the UK, Poland, Italy, Hungary, Denmark and Czech Republic, to bring together senior and junior academics and engineers from diverse fields of automatic control, fault detection, and signal processing. The workshop provides an opportunity for researchers and developers to present their recent theoretical developments, practical applications, or even open problems. It also offers a great opportunity for industrial partners to express their needs and priorities and to review the current activities in the fields. A total of 100 papers have been submitted for ACD 2016. Based on the peer reviews 71 papers were accepted for oral presentation, 4 papers withdrawn, 3 papers not presented. The accepted papers covered areas of Fault Diagnosis, Estimation and Observation, Fault Tolerant Control, Predictive Control, Robust Control, Control Theory, fractional order systems, Modeling and Data °Processing, Software tools and code generation. In addition, four excellent plenary lectures were delivered by experts on their domain: Ir. Serge Legonidec from the company Airbus Safran Launchers, France : An overview of connections between scientific automatic topics and their applications in the propulsive systems, Dr. Ir. Jan-Willem Van Wingerden, Technical University of Delft, Nederland : Wind Energy Control Research, Prof. Sarah Spurgeon, University College London, UK: On discontinuous Observers: From Basic Properties to a Robust Fault Detection and Condition Monitoring Tool, Dr. Joseph-Julien Yame, University of Lorraine, Nancy, France : Data Driven Fault Tolerant Control

  4. Joint deployment of refuelling infrastructure and vehicles

    International Nuclear Information System (INIS)

    Smith, R.

    2010-01-01

    A wide range of fuels will be used in future transportation technologies. This presentation discussed refuelling infrastructure solutions for alternative fuels. A well-placed demonstration infrastructure will help to accelerate market development. Stakeholder collaboration is needed to create high value business paradigms and identify stakeholder benefits. Infrastructure paradigms include the home; businesses; retail public refuelling forecourts; and multi-fuel waste heat recovery sites. Commercial nodes can be developed along major transportation routes. Stakeholder groups include technology providers, supply chain and service providers, commercial end-users, and government. A successful alternative fuel infrastructure model will consider market development priorities, time frames and seed investment opportunities. Applications must be market-driven in order to expand. A case study of the natural gas vehicle (NGV) program in Ontario was also discussed, as well as various hydrogen projects. tabs., figs.

  5. Refueling system for a nuclear reactor

    International Nuclear Information System (INIS)

    Koschkin, J.N.; Ordynskij, G.V.; Schchijan, C.G.; Schapkin, A.F.; Fadeev, A.I.; Laptev, F.V.; Batjukov, V.I.; Korolkov, K.I.; Borodin, I.V.; Tschernomordik, E.N.

    1979-01-01

    With the refueling system fuel elements are transferred from the intermediate distributing chamber within the fast breeder reactor vessel to the storage tanks for new and irradiated fuel elements outside of the reactor vessel and vice versa. It consists of a hermetic chamber, filled with inert gas, within which the refueling machine, having got a vertical swing pipe, is placed. On the swing pipe there is mounted by means of a bracket a hanging support tube for a tube manipulator that can be moved over the openings to the fuel elements. At the end of the tube manipulator there is a gripping device whose drive mechanism is arranged within the support tube. The swing pipe is moved by means of a drive mechanism outside of the chamber. (DG) [de

  6. Aerial Refueling Boom/Receptacle Guide

    Science.gov (United States)

    2017-07-28

    Collision Beacon 22 9.6.2 Tanker Identity Platform Illumination 22 9.6.3 Formation Lights 22 9.6.4 Tanker/Receiver Aircraft...unlatch the receptacle door lock system, mechanical, electrical or hydraulic. Some airplanes will have a master refuel switch which energizes the...some receiver aircraft, pulling the manual door control handle to the detented “DOOR OPEN” position will release the receptacle door lock and

  7. The 13th quality control survey for radioisotopes in vitro tests in Japan, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    This paper presents the results of the 13th quality control nationwide survey. Of 568 hospitals performing RI in vitro tests as of December 1991, 280 (49.3%) participated in this survey. The following 37 items were examined: ACTH, 17[alpha]-hydroxyprogesterone, [alpha]-fetoprotein, aldosterone, [beta]2-microglobulin, CA 125, CA 15-3, CA 19-9, calcitonin, CEA, cortisol, C-peptide, digoxin, esteradiol, ferritin, free triiodothyronine (T[sub 3]), free thyroxine (T[sub 4]), FSH, gastrin, GH, glucagon, IgE, insulin, LH, PAP, progesterone, prolactin, PTH, somatomedin C, T[sub 3], T[sub 4], T[sub 3] uptake, TBG, testosterone, thyroglobulin, tissue polypeptide antigen, and TSH. Reliability and safety of measurement values were evaluated based on protein components of serum samples, spontaneous reliability test, time-dependent reliability test, repeated freezing-dissolution test, and serial change test after freezing. 'Within kit variation' between facilities was great especially for ACTH, CA 15-3, CA 19-9, free T[sub 4], calcitonin, gastrin, and testosterone, and was favorable for [beta][sub 2]-microglobulin, CA 125, digoxin, cortisol, IgE, T[sub 3], T[sub 4], T[sub 3] uptake, and TBG. It was noted that there was a great difference in measurement values of free T[sub 3] and free-T[sub 4] between RIA kits and non-isotopic kits. (N.K.).

  8. The 13th South-East Asian Congress of Medical Physics (SEACOMP 2015)

    International Nuclear Information System (INIS)

    2016-01-01

    These proceedings comprise selected, edited papers that were presented at the 13th SOUTH EAST ASIAN CONGRESS OF MEDICAL PHYSICS with the theme of “Improving the quality of human health through physics”, held in Yogyakarta, Indonesia, 10-12 December 2015. It was hosted by Sunan Kalijaga State Islamic University (UIN Sunan Kalijaga), Institut Teknologi Bandung (ITB) and University of Indonesia (UI) in association with the South East Asia Federation of Organizations for Medical Physics (SEAFOMP). Yogyakarta was the ancient capital of Daerah Istimewa Yogyakarta. It is famous for the UNESCO world heritage site of Borobudur temple. This temple was built in the 9 th century during the reign of the Sailendra Dynasty. The temple was designed in the Javanese Buddhist architectural style. The monument was restored by the Indonesian government with UNESCO's help in 1975 and 1982. The congress attracted about 241 participants from 13 countries. Twelve invited speakers delivered nine plenary lectures as well as four pre-congress workshops. A total of 86 oral and 65 poster presentations were given. A variety of topics were discussed, ranging from the most advanced topics such as proton therapy, image-guided radiotherapy, functional MRI to the more conventional ones such as dose distribution, simulation, dosimetry, quality assurance, etc. In this proceedings papers are published under five categories, namely therapeutics, diagnostics, nuclear medicine, biomedical engineering and biophysics. (paper)

  9. The 13th international workshop on targetry and target chemistry proceedings

    International Nuclear Information System (INIS)

    Haroun, S.; Givskov, A.; Jensen, Mikael

    2011-06-01

    This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risoe National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production of radioactive isotopes with accelerators. The WTTC series of workshops was initiated for the purpose of exchanging information about the problems and solutions associated with the production of radioisotopes for biomedical research and their applications to the diagnosis and treatment of disease. The goal of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal sessions. The present proceedings captures both submitted abstracts and the actual presentations showed during the very successful workshop meeting number 13 in the row, the WTTC13. (Author)

  10. The Serbo-Bulgarian relations at the end of the 13th century

    Directory of Open Access Journals (Sweden)

    Mišić Siniša

    2009-01-01

    Full Text Available Relations between the Serbs and the Bulgarians at the end of the 13th century has been a part of global international relations in the Balkans and in the Danube region. The Tatars (Mongols as the powerful warring people represent external factor that highly influenced those relations. They also made powerful impact on the Serbian and Bulgarian states of the time. The relations between the Serbs and the Bulgarians had not been at the time determined by their attitude toward the Byzantine Empire which was of the Serbian state, while Bulgaria went through tough period of disintegration of the central power. The internal affaires of those two states influenced their mutual relations. During the war with the Byzantine Empire, king Milutin tried to keep Bulgaria on his side, which is the reason why he became related by the marriage to the Bulgarian imperial family. However, strong involvement of Nogay made this alliance non-useful. After 1299 Serbia lost interest for Bulgaria, and behavior toward the queen Ana made two states enter the 14th century as the enemies. The close relations would be maintained with Vidin. In the frame of those relations Milutin's marriage and release of the Bulgarian princess Ana should be regarded, while Stefan's marriage had been motivated differently and happened around 1305/1306.

  11. The 13th international workshop on targetry and target chemistry proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Haroun, S. (SFU, TRIUMF (Canada)); Givskov, A.; Jensen, Mikael (Technical Univ. of Denmark. Risoe National Laboratory for Sustainable Energy, Radiation Research Division, Roskilde (Denmark))

    2011-06-15

    This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risoe National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production of radioactive isotopes with accelerators. The WTTC series of workshops was initiated for the purpose of exchanging information about the problems and solutions associated with the production of radioisotopes for biomedical research and their applications to the diagnosis and treatment of disease. The goal of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal sessions. The present proceedings captures both submitted abstracts and the actual presentations showed during the very successful workshop meeting number 13 in the row, the WTTC13. (Author)

  12. Proceedings of the 13th meeting for tandem accelerators and related techniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    The 13th Meeting for Tandem Accelerators and Related Techniques was held on June 8-9, 2000 at Mutsu, Aomori Prefecture, under the auspices of Marine Research Laboratory, Mutsu Establishment, the Japan Atomic Energy Research Institute. About 60 people participated in the meeting from 27 universities and organizations, many of which have a tandem accelerator or an electrostatic accelerator. The objectives of the meeting are to exchange information on tandem accelerates or electrostatic accelerators by making a presentation on related research and topics, and also to enhance mutual friendship of participants, resulting in the contribution to associated R and D. The meeting mainly consisted of presentations by participants and corresponding Q and A; the present situation on facilities of accelerator mass spectrometers (AMS), operations of and research on tandem accelerators or electrostatic accelerators, applications of AMS, related techniques and applications using accelerators, and so on. This report summarizes the contents of presentations made in the meeting. The 30 of the presented papers are indexed individually. (J.P.N.)

  13. [Fragments of an old west Nordic pharmacopoeia of the 13th century ].

    Science.gov (United States)

    Schwabe, Fabian

    2009-01-01

    Only few medicine books in Norrøn language have survived till today. Concerning Norway and Iceland, just seven fragments of manuscripts are known to us. The oldest manuscript has been dated at about the 13th century, the youngest, which was found in Ireland, at about the time between 1500 and 1550. In medieval times, genuine Scandinavian medical literature did not exist. All seven manuscripts are connected with Continental European sources that are derived from monastic medicine and classical antiquity. The names of Galen, Hippocrates of Kos and Dioscorides are mentioned in some of the texts. Obviously, Norway and Iceland were the recipients of an intensive knowledge transfer from the South via Denmark to the North. Henrik Harpestraeng's book of herbs and the well-known 'Macer floridus' (11th century) are the main sources of the Norrøn manuscripts that are highly related to each other. The text and its variations was made use of during a long period of time and it was widely distributed. A diplomatic edition of the oldest fragment, manuscript AM 655 XXX, and a translation into modern German are the core of the article.

  14. Staphylococcus aureus carriage among participants at the 13th European Congress of Clinical Microbiology and Infectious Diseases.

    NARCIS (Netherlands)

    Nulens, E.; Gould, I.; MacKenzie, F.; Deplano, A.; Cookson, B.; Alp, E.; Bouza, E.; Voss, A.

    2005-01-01

    The aim of this study was to measure the rate of Staphylococcus aureus nasal colonization among attendees of the 13th European Congress of Clinical Microbiology and Infectious Diseases (ECCMID), particularly with regard to methicillin-resistant (MRSA) strains. The 31.4% rate of Staphylococcus aureus

  15. IAEA technical meeting: 13th meeting of the IFRC Subcommittee on Atomic and Molecular Data for Fusion. Summary report

    International Nuclear Information System (INIS)

    Clark, R.E.H.; Peacock, N.J.

    2002-11-01

    This report briefly describes the proceedings, conclusions and recommendations of the 13th Meeting of the Subcommittee on Atomic and Molecular Data for Fusion of the International Fusion Research Council held on 24-25 June, 2002 at the IAEA Headquarters in Vienna Austria. The report includes an Executive Summary of the Subcommittee from this Meeting. (author)

  16. Residual risks of the 13th amendment to the German Atomic Energy Act

    International Nuclear Information System (INIS)

    Schneider, Horst

    2011-01-01

    The 13th amendment to the German Atomic Energy Act, which was adopted by the German federal parliament on June 30 and entered into force on August 6, 2011, must be judged in the light of its genesis. Federal Chancellor Merkel, in her government declaration of June 9, 2011, had mentioned topics such as residual risk, safety standards, and risk assumptions, on which the federal government, in the week after the event of March 11, 2011, had commissioned the Advisory Committee on Reactor Safeguards (RSK) to conduct a comprehensive safety review of all German nuclear power plants, and appointed an Ethics Committee to write an opinion on safe energy supply. On the basis of quickly drafted reports, the federal cabinet, without any international harmonization (EU, IEA), adopted a draft opt out law on June 6, 2011. How should the declarations by the Federal Chancellor on June 9, 2011 be classified in terms of atomic energy law? In her words, it all revolved around the residual risk. The debate, which has been shifted to the realm of constitutional law, is open to considerations and steps to attack the new opt out law on grounds of material unconstitutionality (violation of the property guarantee under Sec. 14 or the principle of equality under Art.3 of the Basic Law). As far as final storage is concerned, the amendment to the German Atomic Energy Act announced still for this year, also for transposition of the EURATOM Directive of July 19, 2011 about nuclear waste management, the ''re-assessment of the residual risk'' is not likely to play a role. All these events are reminiscent of a sentence by former Federal Chancellor Schmidt: ''The history of the NATO dual-track decision remains a textbook case showing that even in a democracy emotions using ethical arguments, mixed with demagogy, can become strong enough to cast aside balanced reason.'' There is also a distinction by Max Weber between ''ethics of ideology'' and ''ethics of responsibility''. (orig.)

  17. Refueling system for the gas-cooled fast breeder reactor

    International Nuclear Information System (INIS)

    Hawke, B.C.

    1980-05-01

    Criteria specifically related to the handling of Gas-Cooled Fast Breeder Reactor (GCFR) fuel are briefly reviewed, and the most significant requirements with which the refueling system must comply are discussed. Each component of the refueling system is identified, and a functional description of the fuel handling machine is presented. An illustrated operating sequence describing the various functions involved in a typical refueling cycle is presented. The design status of components and subsystems selected for conceptual development is reviewed, and anticipated refueling time frames are given

  18. Optimization of hydrogen vehicle refueling via dynamic simulation

    DEFF Research Database (Denmark)

    Rothuizen, Erasmus Damgaard; Mérida, W.; Rokni, Masoud

    2013-01-01

    loss in the vehicle's storage system is one of the main factors determining the mass flow and peak cooling requirements of the refueling process. The design of the refueling station does not influence the refueling of the vehicle when the requirements of the technical information report J2601 from...... Society of Automotive Engineers are met. However, by using multiple pressure stages in the tanks at the refueling station (instead of a single high-pressure tank), the total energy demand for cooling can be reduced by 12%, and the compressor power consumption can be reduced by 17%. The time between...

  19. Turn of the century refueling: A review of innovations in early gasoline refueling methods and analogies for hydrogen

    International Nuclear Information System (INIS)

    Melaina, Marc W.

    2007-01-01

    During the first decades of the 20th century, a variety of gasoline refueling methods supported early US gasoline vehicles and successfully alleviated consumer concerns over refueling availability. The refueling methods employed included cans, barrels, home refueling outfits, parking garage refueling facilities, mobile stations, hand carts and curb pumps. Only after robust markets for gasoline vehicles had been firmly established did the gasoline service station become the dominant refueling method. The present study reviews this history and draws analogies with current and future efforts to introduce hydrogen as a fuel for vehicles. These comparisons hold no predictive power; however, there is heuristic value in an historical review of the first successful and large-scale introduction of a vehicle fuel. From an energy policy perspective, these comparisons reinforce the importance of a long-term and portfolio approach to support for technology development and innovation

  20. The hydrogen refuelling plant in Madrid

    Energy Technology Data Exchange (ETDEWEB)

    Giron, E.; Saez, A.; Julia, A.

    2005-07-01

    Since the late days of spring 2003, a hydrogen refuelling station is operating in Madrid to provide fuel to a set of four FC-buses running in the frame of the European demonstration projects CUTE and CITYCELLS. This station is located at one of the EMT(1) bus depot premises. The station was designed and built for the EMT by the consortium 'esH2' composed by the industrial gases manufacturer Air Liquide Espana, the energy utility Gas Natural SDG and the oil company Repsol YPF. (Author)

  1. On the refuelling of large divertor experiments

    International Nuclear Information System (INIS)

    Staebler, A.; Haas, G.; Ott, W.; Speth, E.

    1976-01-01

    The use of fast hydrogen atoms, molecules and clusters for refuelling large divertor-experiments like ASDEX is investigated. Three criteria for the choice among the various methods are discussed. It is shown that clusters suffer from lack of penetration. Molecules, created by fragmentation of clusters, offer the advantage of plasma-like energy combined with appreciable penetration. Large penetration and high ionization efficiency can only be achieved at energies for above the plasma temperature with H 0 -atoms of several tens of keV

  2. Combined cooling and purification system for nuclear reactor spent fuel pit, refueling cavity, and refueling water storage tank

    Science.gov (United States)

    Corletti, Michael M.; Lau, Louis K.; Schulz, Terry L.

    1993-01-01

    The spent fuel pit of a pressured water reactor (PWR) nuclear power plant has sufficient coolant capacity that a safety rated cooling system is not required. A non-safety rated combined cooling and purification system with redundant branches selectively provides simultaneously cooling and purification for the spent fuel pit, the refueling cavity, and the refueling water storage tank, and transfers coolant from the refueling water storage tank to the refueling cavity without it passing through the reactor core. Skimmers on the suction piping of the combined cooling and purification system eliminate the need for separate skimmer circuits with dedicated pumps.

  3. Community Energy: Analysis of Hydrogen Distributed Energy Systems with Photovoltaics for Load Leveling and Vehicle Refueling

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Zuboy, J.

    2014-10-01

    Energy storage could complement PV electricity generation at the community level. Because PV generation is intermittent, strategies must be implemented to integrate it into the electricity system. Hydrogen and fuel cell technologies offer possible PV integration strategies, including the community-level approaches analyzed in this report: (1) using hydrogen production, storage, and reconversion to electricity to level PV generation and grid loads (reconversion scenario); (2) using hydrogen production and storage to capture peak PV generation and refuel hydrogen fuel cell electric vehicles (FCEVs) (hydrogen fueling scenario); and (3) a comparison scenario using a battery system to store electricity for EV nighttime charging (electric charging scenario).

  4. PREFACE: 13th Anglo-French Physical Acoustics Conference (AFPAC2014)

    Science.gov (United States)

    Gélat, Pierre; Pinfield, Valerie; Cegla, Frederic; Saffari, Nader; Lhémery, Alain

    2015-01-01

    The 13th Anglo-French Physical Acoustics Conference (AFPAC) was held at Selsdon Park Hotel, Croydon near London, United Kingdom, on 15-17 January 2014. The venue was an excellent location to exchange ideas, regardless whether this happened in the conference room, over lunch at the drinks reception in the conservatory, in the oak panelled bar after the conference dinner or in the local pub next door. Over 45 papers were presented at the conference. There were over 60 delegates from institutions covering four countries. The invited speakers from the French side shared their knowledge about the generation of sound from supersonic jets (Prof Christophe Bailly, École Centrale de Lyon) and the application of ultrasonic microscropy in the nuclear industry (Prof Gilles Despaux, Université de Montpellier). The UK invited speakers included Prof Malcolm Povey (University of Leeds), who talked about characterisation of the nucleation of crystals using ultrasound, and Prof Bruce Drinkwater (University of Bristol), who captured the audience by speaking about "ultrasonic lassos" and ultrasonic particle manipulation. There was a strong representation of laser ultrasonics at the meeting with scientific considerations of problems and applications that range from the macro to the nanoscale. There were also numerous papers on the interaction of elastic and acoustic waves with complex materials and scattering of these waves by materials such as foams or cavitating liquids. Presentations on biomedical applications are increasingly being featured at AFPAC meetings. Talks this year covered topics such as imaging and high-intensity focused ultrasound for therapeutic applications. Finally, there were also several contributions from the field of Non-Destructive Evaluation (NDE) and Structural Health Monitoring (SHM) with talks ranging from the determination of the properties of in vivo wood to ultrasonic scattering techniques and tomographic reconstructions to recover the size and shape of

  5. PREFACE: 13th High-Tech Plasma Processes Conference (HTPP-2014)

    Science.gov (United States)

    2014-11-01

    The High-Tech Plasma Processes - 13th European Plasma Conference (HTPP-2014) was held in Toulouse (France) on 22-27 June 2014. The conference series started in 1990 as a thermal plasma conference and has gradually expanded to include other related topics. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is an international conference organised in Europe every two years with topics encompassing the whole field of plasma processing science. The aim of the conference is to bring different scientific communities together, to facilitate contacts between science, technology and industry and to provide a platform for the exploration of both the fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have acheived a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 142 people from 17 countries attended the conference with the total number of contributions being 155, consisting of 8 plenary and 8 invited talks plus 51 oral and 88 poster contributions. We have received numerous papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed (60 referees with at least two reviewing each paper) and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 52 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We have grouped the papers into the following 5 topics: - Arc-Materials Interaction and Metallurgy - Plasma Torches and Spraying - Synthesis of Powders and Nanomaterials - Deposition and Surface Treatment - Non-Equilibrium Plasmas We deeply thank the authors for their enthusiastic and high

  6. Refueling strategy at the Budapest research reactor

    International Nuclear Information System (INIS)

    Hargitai, Timor

    1998-01-01

    Refueling strategy is very important for nuclear power plants and for highly utilized research reactors with power level in the megawatt range. New core design shall fulfill several demands and needs which can contradict each other sometimes. The loaded uranium quantity should assure the scheduled operation time (energy generation) and the maneuvering capability even at the end of the campaign. On the other hand the built in excess reactivity cannot be too high, because otherwise it would jeopardize the shutdown margin and reactor safety. Moreover the core arrangement should be optimum for in-core irradiation purposes and for the beam port experiments too. Sometimes this demand can be in contradiction with the desired burnup level. The achieved burnup level is very important from the fresh fuel consumption point of view, which has direct economic significance, however the generated spent fuel quantity is an important issue too. The refueling technique presented here allowed us at the Budapest Research Reactor to reach average burnup levels superseding 60%. (author)

  7. Refuelling: Swiss station will be semi-automated

    International Nuclear Information System (INIS)

    Fontaine, B.; Ribaux, P.

    1981-01-01

    The first semi-automated LWR refuelling machine in Europe has been supplied to the Leibstadt General Electric BWR in Switzerland. The system relieves operators of the boring and repetitive job of moving and accurately positioning the refuelling machine during fuelling operations and will thus contribute to plant safety. The machine and its mode of operation are described. (author)

  8. Silver Tableware from the Nomad Burials of 13th –14th Centuries on the East European Plain

    Directory of Open Access Journals (Sweden)

    Chkhaidze Victor N.

    2017-12-01

    Full Text Available The article considers 31 nomad burials of 13th – 14th cc. containing prestigious silverware (waist bowls, ladles and goblets discovered in the territory of nine regions of the East European Plain (Trans-Volga, Volga, Don, Cis-Caucasus, Kuban, Donets, Dnieper, Ob, Bug and Trans-Dniester regions. It is one of the most informative and expressive groups of nomadic burial inventories only available for the the representatives of the ruling elite and included in the attributes of nomadic aristocracy of 13th – 14th cc. The description of each finding is provided together with the aggregate data concerning the dating of the burials, their type and the gender of the deceased. The authors consider the role of tableware in burial rites and its correspondence the representatives of family and tribal nomadic Golden Horde aristocracy.

  9. Notarial acts «ad pedes consulum». About some Milanese trial records (12th-13th Century

    Directory of Open Access Journals (Sweden)

    Marta Luigina Mangini

    2014-06-01

    Full Text Available Milan’s documentary heritage created between the 12th and the 13th century is to be found by searching the records of the administrative offices and religious institutions that regularly had dealings with it. The aim of this paper is to examine some of these records anew, particularly evaluating the evolution of the constants and variables that have strongly influenced their creation and preservation over time.

  10. Overseas Voter Mobilisation in Singapore: Implications from Malaysia’s 13th General Election

    OpenAIRE

    James Gomez; Rusdi Omar

    2013-01-01

    This paper discusses voter mobilisation and other election-related activities of Malaysian voters living, studying and working in Singapore in the context of Malaysia’s 13th general election (GE13). According to the World Bank, nearly 400,000 Malaysians reside in the city-state. Thus these figures represent a significant Malaysian voter pool based in Singapore. Efforts to mobilise these voters for general elections or other causes have political implications for both countries, which became...

  11. EDITORIAL: Invited review and topical lectures from the 13th International Congress on Plasma Physics

    Science.gov (United States)

    Zagorodny, A.; Kocherga, O.

    2007-05-01

    The 13th International Congress on Plasma Physics (ICPP 2006) was organized, on behalf of the International Advisory Committee of the ICPP series, by the National Academy of Sciences of Ukraine and the Bogolyubov Institute for Theoretical Physics (BITP) and held in Kiev, Ukraine, 22 26 May 2006. The Congress Program included the topics: fundamental problems of plasma physics; fusion plasmas; plasmas in astrophysics and space physics; plasmas in applications and technologies; complex plasmas. A total of 305 delegates from 30 countries took part in the Congress. The program included 9 invited review lectures, 32 invited topical and 313 contributed papers (60 of which were selected for oral presentation). The Congress Program was the responsibility of the International Program Committee: Anatoly Zagorodny (Chairman) Bogolyubov Institute for Theoretical Physics, Ukraine Olha Kocherga (Scientific Secretary) Bogolyubov Institute for Theoretical Physics, Ukraine Boris Breizman The University of Texas at Austin, USA Iver Cairns School of Physics, University of Sydney, Australia Tatiana Davydova Institute for Nuclear Research, Ukraine Tony Donne FOM-Institute for Plasma Physics, Rijnhuizen, The Netherlands Nikolai S Erokhin Space Research Institute of RAS, Russia Xavier Garbet CEA, France Valery Godyak OSRAM SYLVANIA, USA Katsumi Ida National Institute for Fusion Science, Japan Alexander Kingsep Russian Research Centre `Kurchatov Institute', Russia E P Kruglyakov Budker Institute of Nuclear Physics, Russia Gregor Morfill Max-Planck-Institut für extraterrestrische Physik, Germany Osamu Motojima National Institute for Fusion Science, Japan Jef Ongena ERM-KMS, Brussels and EFDA-JET, UK Konstantyn Shamrai Institute for Nuclear Research, Ukraine Raghvendra Singh Institute for Plasma Research, India Konstantyn Stepanov Kharkiv Institute of Physics and Technology, Ukraine Masayoshi Tanaka National Institute for Fusion Science, Japan Nodar Tsintsadze Physics Institute, Georgia The

  12. PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

    Science.gov (United States)

    Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

    2014-03-01

    This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

  13. Control Room Tasks During Refueling in Ringhals 1 Nuclear Power Plant - Operator performance during refuelling outages

    International Nuclear Information System (INIS)

    Stroebeck, Einar; Olausson, Jesper; Van Gemst, Paul

    1998-01-01

    This paper discusses the performance and tasks of the operators in the control room during refuelling outages. Analyses of such events have, during the last years, shown that the risk for nuclear accidents is not negligible compared with the risk at higher reactor power levels. Some experts have the opinion that, due to mistakes during an outage, the risk for such accidents during the outage and other accidents later on during power operation is higher than in other plant situations. The high risk level is mainly a result of errors at maintenance actions and supervision of lining up of safety systems. Most of the control rooms in existing NPPs were designed more than 10 years ago. At that time the activities and the tasks for the operators were not very well understood. Procedures for refuelling and other activities during the outages were not described very well. Often the utility organisation for refuelling outages was not established at the start of the control room design. Experience from operation during many years has shown that the performance of operators can be improved in existing plant, and thus risks be reduced, by upgrading the control room. These issues have been studied as a part of the modernisation project for Ringhals 1, an ABB Atom BWR owned by Vattenfall AB in Sweden. The paper will describe the working model for upgrading the control room and important issues to take care of with respect to refuelling outages. The identified issues will be used as the input for improving control room philosophy and the individual technical systems. (authors)

  14. Risk assessment of LPG automotive refuelling facilities

    Energy Technology Data Exchange (ETDEWEB)

    Melchers, R.E. [University of Newcastle, Newcastle (Australia). Dept. of Civil, Surveying and Enviromental Engineering; Feutrill, W.R. [Wesfarmers Kleenheat Gas Pty. Ltd., Perth (Australia)

    2001-12-01

    Quantified risk analysis (QRA) was used for the revision of regulatory separation distances associated with medium size liquefied petroleum gas (LPG) refuelling facilities used in automotive service (gas) stations. Typically these facilities consist of a 7.5 kl pressure vessel, pump, pipework, dispensing equipment and safety equipment. Multi-tank installations are relatively uncommon. This paper describes the hazard scenarios considered, the risk analysis procedure and the selection and application of data for initiating events and for rates of failure of mechanical components and of the pressure vessel. Human errors and intervention possibilities were also considered. Because of the inapplicability of established consequence models and the relatively small scale of the facilities, a number of tests were performed to estimate flame length, flame impingement effects, ignition probabilities and the effectiveness of screening devices. (author)

  15. Hydrogen Refuelling Station Hamburg HafenCity

    Energy Technology Data Exchange (ETDEWEB)

    Hustadt, Daniel [Vattenfall Europe Innovation GmbH (Germany)

    2010-07-01

    Decoupling the growing road traffic and the related greenhouse gas emissions demand a major effort by research, OEMs as well as oil and energy companies. Above all the reduction of CO2-emissions is a growing need for climate protection. Bio fuels can help to reach those targets, however the available sources are not enough to guarantee a sustainable supply. Battery Electric Vehicles are today limited technically with regards to range and weight and will most likely be used in metropolitan regions. In this project the necessary infrastructure to refuel buses and cars of a bigger fleet will be installed. Doing so the prerequisite for using fuel cell based cars and buses as an alternative way of mobility is developed. The capability of new components for the productions, storage and distribution of larger amounts of hydrogen is shown. Additionally still existing potential optimizing on a technical and operational level shall be made available. (orig.)

  16. Refueling outage data collection and analysis

    International Nuclear Information System (INIS)

    Harshaw, K.; Quilliam, J.; Brinsfield, W.; Jeffries, J.

    1993-07-01

    This report summarizes the results of an EPRI project to compile an industry generic refueling outage database applicable to alternate (non-full-power) modes of shutdown conditions at nuclear power plants. The project team evaluated five outages at two BWR plants. They obtained data primarily from control room logs, outage schedules, incident reports, and licensee event reports. The team organized the data by outage segment and time line. Due to its small sample size, this study produced no conclusive results related to initiating event frequencies, equipment failure rates, or human reliability estimates during shutdown conditions. However, it pointed out the problems of brief or inconsistent recordkeeping. A too brief record results in difficulty determining if the root cause of an event was mechanical or the result of human performance. Retrieval of data can be difficult and labor-intensive. There is a clear need for better, more comprehensive documentation

  17. Gear failure of a PHWR refuelling machine

    International Nuclear Information System (INIS)

    Iorio, A.F.; Crespi, J.C.

    1986-01-01

    After ten year service in Atucha Nuclear Station a gear belonging to a pressurized heavy water reactor refuelling machine, failed. The gear box was used to transmit motion to the inlet-outlet heavy-water valve of that machine. Visual examination of the gear device revealed an absence of lubricant and several gear teeth were broken off at the root. The gear motion was transmitted from a speed-reducing device with controlled adjustable times in order to produce a right fitness of the valve closure. The main cause of gear failure was due to misalignment produced during assembly or in-service operation. It is suggested to control periodically the level of oil lubricant. (orig./IHOE) [de

  18. PREFACE: 13th International Conference on Muon Spin Rotation, Relaxation and Resonance

    Science.gov (United States)

    2014-12-01

    The 13th International Conference on Muon Spin Rotation, Relaxation and Resonance (μSR2014) organized by the Laboratory for Muon Spin Spectroscopy, Paul Scherrer Institute in collaboration with the University of Zurich and the University of Fribourg, was held in Grindelwald, Switzerland from 1st to 6th June 2014. The conference provided a forum for researchers from around the world with interests in the applications of μSR to study a wide range of topics including condensed matter physics, materials and molecular sciences, chemistry and biology. Polarized muons provide a unique and versatile probe of matter, enabling studies at the atomic level of electronic structure and dynamics in a wide range of systems. The conference was the thirteenth in a series, which began in Rorschach in 1978 and it took place for the third time in Switzerland. The previous conferences were held in Cancun, Mexico (2011), Tsukuba, Japan (2008), Oxford, UK (2005), Williamsburg, USA (2002), Les Diablerets, Switzerland (1999), Nikko, Japan (1996), Maui, USA (1993), Oxford, UK (1990), Uppsala, Sweden (1986), Shimoda, Japan (1983), Vancouver, Canada (1980), and Rorschach, Switzerland (1978). These conference proceedings contain 67 refereed publications from presentations covering magnetism, superconductivity, chemistry, semiconductors, biophysics and techniques. The conference logo, displayed in the front pages of these proceedings, represents both the location of μSR2014 in the Alps and the muon-spin rotation technique. The silhouette represents the famous local mountains Eiger, Mönch and Jungfrau as drawn by the Swiss painter Ferdinand Hodler and the apple with arrow is at the same time a citation of the Wilhelm Tell legend and a remembrance of the key role played by the muon spin and the asymmetric muon decay (which for the highest positron energy has an apple like shape). More than 160 participants (including 32 registered as students and 13 as accompanying persons) from 19 countries

  19. PREFACE: 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012)

    Science.gov (United States)

    Unal, Halil Ibrahim

    2013-02-01

    Conference photograph The 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012) was held in Ankara, Turkey at Gazi University in the Architect Kemaleddin historical hall on 2-6 July 2012. The first International Conference on Electrorheological Fluids and Magnetorheological Suspensions took place nearly 25 years ago and this conference continued the same tradition by providing an arena for researchers around the world to present their new research findings in these fields, and gave them the opportunity to learn about the latest research and technology and to renew their acquaintances. The meeting brought together scientists and engineers in multidisciplinary areas such as chemical engineering, mechanical engineering, materials science and engineering, physics, chemistry and polymer science and technology, to explore the state-of-art technology, identify key areas to be focused on and discuss their problems/issues. All oral presentations were held in a single session to enhance the interactions between the scientists and engineers. The ERMR2012 Conference included plenary lectures given by prominent leaders in their respective fields. About 130 participants from more than 50 organizations attended the conference and 15 plenary speeches, 64 oral presentations and 57 poster presentations took place in the following areas: (i) synthesis, characterization and processing of novel ER/MR materials, (ii) dynamics, chain and structure formation of ER/MR materials, (iii) ER/MR elastomers, ferrogels and their characterizations, (iv) rheological techniques and measurements of ER/MR materials, (v) modeling and simulations of ER/MR materials, (vi) device development and control techniques and (vii) applications of ER/MR materials. The ERMR2012 International Conference began with Turkish classical music performed by the musicians of the Ministry of Culture and Tourism. Rector Professor Dr R Ayhan welcomed the participants and the

  20. 15th International Congress on Plasma Physics & 13th Latin American Workshop on Plasma Physics

    Science.gov (United States)

    Soto, Leopoldo

    2014-05-01

    The International Advisory Committee of the 15th International Congress on Plasma Physics (ICPP 2010) and the International Advisory Committee of the 13th Latin American Workshop on Plasma Physics (LAWPP 2010), together agreed to carry out this combined meeting ICPP-LAWPP-2010 in Santiago de Chile, 8-13 August 2010, on occasion of the Bicentennial of Chilean Independence. The ICPP-LAWPP-2010 was organized by the Thermonuclear Plasma Department of the Chilean Nuclear Energy Commission (CCHEN) as part of the official program within the framework of the Chilean Bicentennial. The event was also a scientific and academic activity of the project ''Center for Research and Applications in Plasma Physics and Pulsed Power, P4'', supported by National Scientific and Technological Commission, CONICYT-Chile, under grant ACT-26. The International Congress on Plasma Physics was first held in Nagoya, in 1980, and followed by the Congresses: Gothenburg (1982), Lausanne (1984), Kiev (1987), New Delhi (1989), Innsbruck (1992), Foz do Iguacu (1994), Nagoya (1996), Prague (1998), Quebec City (2000), Sydney (2002), Nice (2004), Kiev (2006), and Fukuoka (2008). The purpose of the Congress is to discuss the recent progress and future views in plasma science, including fundamental plasma physics, fusion plasmas, astrophysical plasmas, and plasma applications, and so forth. The Latin American Workshop on Plasma Physics was first held in 1982 in Cambuquira, Brazil, followed by the Workshops: Medellín (1985), Santiago (1988), Buenos Aires (1990), Mexico City (1992), Foz do Iguacu (1994, also combined with ICPP), Caracas (1997), Tandil (1998), La Serena (2000), Sao Pedro (2003), Mexico City (2005), and Caracas (2007). The Latin American Workshop on Plasma Physics is a communication forum of the achievements of the plasma-physics regional community, fostering collaboration between plasma scientists within the region and elsewhere. The program of the ICPP-LAWPP-2010 included the topics

  1. Society and Environment Interaction. The Environment of the Laguna de los Tollos (Western Andalusia, 13th-15th Centuries

    Directory of Open Access Journals (Sweden)

    Emilio MARTÍN GUTIÉRREZ

    2014-12-01

    Full Text Available Environment of the Laguna de los Tollos is studied between 13th and 15th Centuries. The research, which aims to analyse the interaction environment-society, is part of a project that will deepen the knowledge of wetlands in this geographical area. In these ecosystems rural communities took advantage with their farmland for hunting, herding, fishing and gathering resources in riparian areas. The chosen chronological period includes a wide range of changes that had a direct impact on the management and organization of rural landscapes.

  2. Creating a human brain proteome atlas--13th HUPO BPP Workshop March 30-31, 2010, Ochang, Korea.

    Science.gov (United States)

    Gröttrup, Bernd; Stephan, Christian; Marcus, Katrin; Grinberg, Lea T; Wiltfang, Jens; Lee, Sang K; Kim, Young H; Meyer, Helmut E; Park, Young M

    2011-07-01

    The HUPO Brain Proteome Project (HUPO BPP) held its 13th workshop in Ochang from March 30th to 31st, 2010 prior to the Korean HUPO 10th Annual International Proteomics Conference. The principal aim of this project is to obtain a better understanding of neurodiseases and aging with the ultimate objective of discovering prognostic and diagnostic biomarkers, in addition to the development of novel diagnostic techniques and new medications. The attendees came together to discuss progress in the clinical neuroproteomics of human and to define the needs and guidelines required for more advanced proteomics approaches. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. A cracked mirror? - forming the ideal ruler in Epirus and Nicaea in the first half of the 13th century

    Directory of Open Access Journals (Sweden)

    Vukašinović Milan

    2015-01-01

    Full Text Available During the first half of the 13th century both Byzantine Empire and the image of its ideal ruler had to undergo a transformation. By applying mostly the narratological analysis to the parenetic texts written in the two successor states of the Empire, the paper sheds light on the dynamic ‘negotiations’ within the Roman elites of the place that the Emperor should have inside the symbolic order, and suggests a possible model of approach to other Byzantine texts and periods. [Projekat Ministarstva nauke Republike Srbije, br. 177015

  4. Selected Lectures of the 13th International Workshop on Neonatology; Cagliari (Italy); October 25th-28th, 2017

    OpenAIRE

    --- Various Authors

    2017-01-01

    Selected Lectures of the 13th International Workshop on Neonatology • The power of Epigenetics • Twins: identical but different • Cagliari (Italy) • October 25th-28th, 2017LECT 1. ASPHYXIA IN THE THIRD MILLENNIUM: FROM VIRGINIA APGAR TO METABOLOMICS • O.D. SaugstadLECT 2. INTRAPARTUM FETAL MONITORING: WHERE ARE WE NOW? • D. Ayres-de-CamposLECT 3. THERAPEUTIC HYPOTHERMIA: REVISED IN­DI­CA­TIONS • E. SalibaLECT 4. ANTIBIOTICS PRESCRIPTION IN NEONATAL INTENSIVE CARE UNIT • G. DimitriouLECT 5. CH...

  5. Regional Consumer Hydrogen Demand and Optimal Hydrogen Refueling Station Siting

    Energy Technology Data Exchange (ETDEWEB)

    Melendez, M.; Milbrandt, A.

    2008-04-01

    Using a GIS approach to spatially analyze key attributes affecting hydrogen market transformation, this study proposes hypothetical hydrogen refueling station locations in select subregions to demonstrate a method for determining station locations based on geographic criteria.

  6. Tracking of fission products release during refueling operations

    International Nuclear Information System (INIS)

    Agarwal, Sharad; Prajapat, M.K.; Vyas, Shyam; Hussain, S.A.

    2001-01-01

    It has been always observed that the release of fission products increase during refueling operations. At RAPP-3 and 4 an attempt has been made to follow-up the change in fission products activity release at each stage of refueling operation and quantification of concentrations of various radionuclides. This exercise was also extended to refueling operation of the channels containing suspected failed fuel. A level of FPNG ( 133 Xe) was observed to increase by a factor of about 10-40 during refueling of failed channel as compared to healthy channel. It can be concluded that by monitoring FPNG levels in exhaust status of the healthiness of spent fuel can be found out. This report discusses in detail the experiment conducted for this purpose. (author)

  7. Aerial Refueling For NATO’s Smart Defence Initiative

    Science.gov (United States)

    2012-04-01

    Rome: NATO Defense College, 2012, 148. 40 David A. Brown , "NATO Studying Development of Dedicated Refueling Unit Similar to Early Warning Force...accessed March 1, 2012). Brown , David A. "NATO Studying Development of Dedicated Refueling Unit Similar to Early Warning Force." Aviation Week...Aircraft. Coulsdon, Surrey: IHS Global Limited, 2011. Jennings, Gareth . "Nations Pool for NATO C-17A Fleet." Jane’s Defence Weekly, October 2008

  8. Image Dependent Relative Formation Navigation for Autonomous Aerial Refueling

    Science.gov (United States)

    2011-03-01

    and local variations of the Earth’s surface make a mathematical model difficult to create and use. The definition of an equipotential surface ...controlled with flight control surfaces attached to it. To refuel using this method, the receiver pilot flies the aircraft to within a defined refueling...I-frame would unnecessarily complicate aircraft navigation that, by definition, is limited to altitudes relatively close to the surface of the Earth

  9. Refueling system with small diameter rotatable plugs

    International Nuclear Information System (INIS)

    Ritz, W.C.

    1987-01-01

    This patent describes a liquid-metal fastbreeder nuclear reactor comprising a reactor pressure vessel and closure head therefor, a reactor core barrel disposed within the reactor vessel and enclosing a reactor core having therein a large number of closely spaced fuel assemblies, and the reactor core barrel and the reactor core having an approximately concentric circular cross-sectional configuration with a geometric center in predetermined location within the reactor vessel. The improved refueling system described here comprises: a large controllably rotatable plug means comprising the substantial portion of the closure head, a reactor upper internals structure mounted from the large rotatable plug means. The large rotatable plug means has an approximately circular configuration which approximates the cross-sectional configuration of the reactor core barrel with a center of rotation positioned a first predetermined distance from the geometric center of the reactor core barrel so that the large rotatable plug means rotates eccentrically with respect to the reactor core barrel; a small controllably rotatable plug means affixed to the large rotatable plug means and rotatable with respect thereto. The small rotatable plug means has a center of rotation which is offset a second predetermined distance from the rotational center of the large rotatable plug means so that the small rotatable plug means rotates eccentrically with respect to the large rotatable plug means

  10. Minimizing or eliminating refueling of nuclear reactor

    Science.gov (United States)

    Doncals, Richard A.; Paik, Nam-Chin; Andre, Sandra V.; Porter, Charles A.; Rathbun, Roy W.; Schwallie, Ambrose L.; Petras, Diane S.

    1989-01-01

    Demand for refueling of a liquid metal fast nuclear reactor having a life of 30 years is eliminated or reduced to intervals of at least 10 years by operating the reactor at a low linear-power density, typically 2.5 kw/ft of fuel rod, rather than 7.5 or 15 kw/ft, which is the prior art practice. So that power of the same magnitude as for prior art reactors is produced, the volume of the core is increased. In addition, the height of the core and it diameter are dimensioned so that the ratio of the height to the diameter approximates 1 to the extent practicable considering the requirement of control and that the pressure drop in the coolant shall not be excessive. The surface area of a cylinder of given volume is a minimum if the ratio of the height to the diameter is 1. By minimizing the surface area, the leakage of neutrons is reduced. By reducing the linear-power density, increasing core volume, reducing fissile enrichment and optimizing core geometry, internal-core breeding of fissionable fuel is substantially enhanced. As a result, core operational life, limited by control worth requirements and fuel burnup capability, is extended up to 30 years of continuous power operation.

  11. The Physical Formation of Nicosia in the Turkish Republic of Northern Cyprus from 13th to 15th Century

    Directory of Open Access Journals (Sweden)

    Çilen ERÇİN

    2014-02-01

    Full Text Available City may be defined as the artificial creation of communal life in a natural environment, made up of complexes of buildings that cater to human needs. Urbanization then is a process that forms a chain of events over time. It may be said that city itself is a process, when viewed as whole. In this article, this formation process is examined taking Nicosia on the island of Cyprus as the example. The article was prompted by a number of factors, namely similarities between the walled city in the centre of Nicosia and its equivalent in European medieval settlements, the fact that Nicosia’s walled city has survived to the present relatively intact, and its lack of mention in available sources. The article examines Nicosia’s walled city in the context of findings on the medieval cities of Europe. The information on Nicosia city in the medieval period and 13th-15th centuries was taken from available sources, and interpreted by analyzing the physical structure of the settlement. In the introduction, an overall perspective is given of the historical period of Nicosia city. This is followed by a detailed description of the medieval period and 13th-15th centuries of the city. The article concludes with an evaluation and comments on the the physical formation of Nicosia city at the close of 15th century.

  12. The Effective Medicinal plants in Cataract Treatment: An Inquiry in Persian Medicine Resources (4-13th century AH

    Directory of Open Access Journals (Sweden)

    MR Sheikhrezaee

    2017-04-01

    Full Text Available BACKGROUND AND OBJECTIVE: Cataract is a kind of eye disease that starts with blurriness of eye lens and the vision is disrupted as the opacity and cloudiness of the lens increases. Iranian people knew cataract as "Nozoul-al-ma" (water fall and they believed that this disease was an effect of the moisture that accumulates between lens and cornea. Currently, surgery is the only way to restore vision in people with cataract. However, effective medical therapy can reduce the costs and risks of surgery. The purpose of this study is to find the effective medicinal plants in cataract treatment. METHODS: This review article based on library research methods was conducted in three steps (keyword determination, analysis of resources, scoring and arrangement by investigating Persian medicine references. In this study, seven books from 4-13th century AH were studied. The results were scored from 1 to 3 based on implicit or undecided statement, single citation, direct statement and emphatic effect statement. FINDINGS: 36 medicinal plants were found and 11 plants (Ferula assafoetida, Ferula Persica, Foeniculum Vulgare, Cyclamen europaeum, Allium cepa, Euphorbia resinifera, Isatis tinctoria, Zataria multiflora , Olea europaea, Caesalpinia bonduc, Commiphora opobalsamum obtained the highest scores. CONCLUSION: The plants that obtained the highest scores were probably the most prominent drugs for the treatment of cataract in 4-13th century AH. Frequent use of these drugs in recent centuries may indicate their appropriate effect on cataract. However, more clinical researches are required to confirm that.

  13. Overseas Voter Mobilisation in Singapore: Implications from Malaysia’s 13th General Election

    Directory of Open Access Journals (Sweden)

    James Gomez

    2013-01-01

    Full Text Available This paper discusses voter mobilisation and other election-related activities of Malaysian voters living, studying and working in Singapore in the context of Malaysia’s 13th general election (GE13. According to the World Bank, nearly 400,000 Malaysians reside in the city-state. Thus these figures represent a significant Malaysian voter pool based in Singapore. Efforts to mobilise these voters for general elections or other causes have political implications for both countries, which became apparent following Singapore-based Malaysians’ activities to encourage Malaysians to return home to cast their votes during the 13th general election. Singapore’s strict public assembly laws led to several legal issues related to the voter mobilisation and election campaign activities undertaken by Malaysians in the city-state. These legal issues became a source of friction between the two countries during the elections as government leaders and authorities on both sides of the causeway accused the other of interfering in domestic political matters. Given the growing number of Malaysians in Singapore and the likely repeat of Malaysian voter mobilisation activities in Singapore in the run-up to the fourteenth general election (GE14 in 2018, issues related to the election activities of Malaysian voters in Singapore stand to be another set of factors that will shape the health of bilateral relations between these two countries.

  14. Design tool for offgrid hydrogen refuelling systems for aerospace applications

    International Nuclear Information System (INIS)

    Troncoso, E.; Lapeña-Rey, N.; Gonzalez, M.

    2016-01-01

    Highlights: • A simulation tool for offgrid CPV-based hydrogen refuelling systems is presented. • Simulations of system configurations with specific UAS hydrogen demand scenarios. • Regarding system size & reliability the most critical components are the CPV array and batteries. • In terms of energy efficiency the most critical component is the electrolyser. - Abstract: To develop an environmentally acceptable refuelling solution for fuel cell-powered unmanned aerial systems (UASs) to operate in remote areas, hydrogen fuel must be produced on-site from renewable energy sources. This paper describes a Matlab-based simulation tool specifically developed to pre-design offgrid hydrogen refuelling systems for UAS applications. The refuelling system comprises a high concentrated PV array (CPV), an electrolyser, a hydrogen buffer tank and a diaphragm hydrogen compressor. Small composite tanks are also included for fast refuelling of the UAV platforms at any time during the year. The novel approach of selecting a CPV power source is justified on the basis of minimizing the system footprint (versus flat plat or low concentration PV), aiming for a containerized remotely deployable UAS offgrid refuelling solution. To validate the simulation tool a number of simulations were performed using experimental data from a prototype offgrid hydrogen refuelling station for UAVs developed by Boeing Research & Technology Europe. Solar irradiation data for a selected location and daily UAS hydrogen demands of between 2.8 and 15.8 Nm"3 were employed as the primary inputs, in order to calculate a recommended system sizing solution and assess the expected operation of the refuelling system across a given year. The specific energy consumption of the refuelling system obtained from the simulations is between 5.6 and 8.9 kW h_e per kg of hydrogen delivered to the UAVs, being lower for larger daily hydrogen demands. Increasing the CPV area and electrolyser size in order to supply higher

  15. Technical and economic analysis of hydrogen refuelling

    International Nuclear Information System (INIS)

    Nistor, Silviu; Dave, Saraansh; Fan, Zhong; Sooriyabandara, Mahesh

    2016-01-01

    Highlights: • Technical and economic models of a hydrogen station for vehicles refuelling. • Hydrogen demand from fuel cell electric vehicles modelled stochastically. • Study case based on a UK pilot project. • Operation of the H_2 station using combined energy from wind and power grid is preferred. • Return on investment of 5–10 years is possible for the hydrogen station. - Abstract: This paper focuses on technical and economic analysis of a hydrogen refilling station to provide operational insight through tight coupling of technical models of physical processes and economic models. This allows the dynamic relationships of the system to be captured and analysed to provide short/medium term analytical capability to support system design, planning, and financing. The modelling developed here highlights the need to closely link technical and economic models for technology led projects where technical capability and commercial feasibility are important. The results show that hydrogen fuel can be competitive with petrol on a GBP/KG basis if the return on investment period is over 10 years for PEM electrolysers and 5 for Alkaline electrolysers. We also show that subsidies on capital costs (as reflected by some R&D funding programs) make both PEM and Alkaline technologies cheaper than the equivalent price of petrol, which suggests more emphasis should be put on commercialising R&D funded projects as they have commercial advantages. The paper also shows that a combined wind and grid connected station is preferable so that a higher number of customers are served (i.e. minimum shortage of hydrogen).

  16. 2015 Special Sessions of the 13th International Conference on Practical Applications of Agents and Multi-Agent Systems

    CERN Document Server

    Hernández, Josefa; Mathieu, Philippe; Campbell, Andrew; Fernández-Caballero, Antonio; Moreno, María; Julián, Vicente; Alonso-Betanzos, Amparo; Jiménez-López, María; Botti, Vicente; Trends in Practical Applications of Agents, Multi-Agent Systems and Sustainability : the PAAMS Collection

    2015-01-01

    This volume presents the papers that have been accepted for the 2015 special sessions of the 13th International Conference on Practical Applications of Agents and Multi-Agent Systems, held at University of Salamanca, Spain, at 3rd-5th June, 2015: Agents Behaviours and Artificial Markets (ABAM); Agents and Mobile Devices (AM); Multi-Agent Systems and Ambient Intelligence (MASMAI); Web Mining and Recommender systems (WebMiRes); Learning, Agents and Formal Languages (LAFLang); Agent-based Modeling of Sustainable Behavior and Green Economies (AMSBGE); Emotional Software Agents (SSESA) and Intelligent Educational Systems (SSIES). The volume also includes the paper accepted for the Doctoral Consortium in PAAMS 2015. PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest develo...

  17. The description and symbolic value of the unicorn in French literature of the 12th and 13th centuries

    Directory of Open Access Journals (Sweden)

    Marija Panić

    2016-02-01

    Full Text Available The paper considers naturalist and symbolic traits attributed to the unicorn in French 12th and 13th century literature. The corpus encompasses the bestiaries comprised by Philippe de Thaon, Gervaise, Guillaume de Normandy, Pierre de Beauvais, Richard de Fournival and pseudo-Pierre de Beauveis, which belong to the tradition of the Physiologoi, as well as other encyclopedic and other works which contain the bookish zoological and geographic knowledge of the middle ages: Mappemonde by Pierre de Beauvais, The letter of presbyter John, and the Mappemonde by Gossouin de Metz. In this corpus where the description of the animals comes mainly from the same written sources (from antiquity and late antiquity and the Bible, we consider how this nonexistent animal is described and to what extent a symbolic interpretation is present.

  18. What are the new challenges, goals, and tasks of occupational health in China's Thirteenth Five-Year Plan (13th FYP) period?

    Science.gov (United States)

    Wang, Bing; Wu, Chao; Kang, Liangguo; Huang, Lang; Pan, Wei

    2018-03-20

    In recent years, the Chinese government has attached great importance to occupational health under the guidance of people-oriented concept. This paper introduces the current status and future development of occupational health in China's Thirteenth Five-Year Plan (13th FYP) period (2016-2020) to promote the cooperation and exchange on occupational health between China and other countries. We collected statistical data about occupational diseases and information addressing occupational diseases. We included all types of official reports, guidelines, policies, and relevant laws published by the Chinese government. China has carried out a series of strategies and measures to reduce the incidence of occupational diseases, and has made progress in occupational health protection. However, occupational health in China still faces severe conditions and challenges for occupational diseases that have not been prevented and controlled effectively. To actively promote the future development of occupational health during the 13th FYP period, China has issued a series of important policy documents (such as the Plan for a Healthy China 2030, the 13th FYP for Occupational Disease Prevention and Control, and the 13th FYP for Occupational Health Hazard Prevention and Control) in the last two years. The overall situation condition of occupational health in China is still serious. Occupational health in China's 13th FYP period faces a series of challenges, future tasks include plans to add the employer and regulatory levels of occupational health management, and occupational health education and publicity to the current technology-dominated approaches.

  19. Manufacturing Competitiveness and Supply Chain Analyses for Hydrogen Refueling Stations

    Energy Technology Data Exchange (ETDEWEB)

    Mayyas, Ahmad T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Garland, Nancy [U.S. Department of Energy

    2018-04-27

    This slide deck was presented in the monthly FCTO webinar series (May 2017). The goal of this presentation was to share our latest results and remarks on the manufacturing competitiveness analysis of the hydrogen refueling stations (HRS). Manufacturing cost models were developed for major systems in the HRS such as compressors, storage tanks, chillers, heat exchangers, and dispensers. In addition to the cost models, we also discussed important remarks from our analysis for the international trade flows and global supply chain for the hydrogen refueling stations. The last part of the presentation also highlights effect of economies of scale and high production volumes on lowering the cost of the hydrogen at the pump.

  20. Structural Analysis of Advanced Refueling Machine of APR1400

    International Nuclear Information System (INIS)

    Cho, J. R.; Kim, Y. H.; Park, B. T.; Park, J. B.; Jung, J. H.

    2007-01-01

    The Refueling Machine (RM) consists of two structural parts of bridge and trolley. The bridge structure is approximately 8.5 m long and 5 m wide and is primarily composed of two deep wide flange sections spanning the rector area at the operating level. The trolley is mounted on wheels that roll on the rails of the bridge. Vertical movements of trolley and bridge are restricted by guide rollers. In this paper, dynamic and structural analyses based on the earthquake spectrum are carried out to verify the structural integrity of advanced refueling machine. It is done by 3-dimensional finite element analysis using ANSYS software

  1. John of Plano Carpini vs Simon of Saint-Quentin: 13th-century Emotions in the Eurasian Steppe

    Directory of Open Access Journals (Sweden)

    Mirko Sardelić

    2017-09-01

    Full Text Available The research objective is to analyse why the accounts of two missionaries who visited the same Mongol “Other” in 1245 are quite different, despite their authors belonging to the same Christian circle. More specifically, the paper explores why Simon’s report is so much more negative in its depiction of the Mongols, and the imagological and emotional impact that these representations had. My research materials include the two mendicant reports produced by John and Simon as well as extant scholarly discussions of various aspects of the Mongol Other, apocalyptic literature, and the relations between Western Christendom and the Mongol Empire in the mid-13th century. The research innovation of the article is in the comparison of the two contemporary accounts, the elaboration of their differences in representation of the Mongols, and the analysis of their imagery from the perspective of the history of emotions. The aim of this paper is to show that in interpreting medieval European texts about the Mongols, one should combine approaches from various fields, including (but not limited to history of emotions, cultural and literal history, anthropology, cross-cultural sociology, and others. Immediate and incorrect interpretations that the Mongols were cannibals or sodomites, as one could be tempted to hold from the account of Simon of Saint-Quentin, must be moderated from scholarly perspectives. These interpretations were the result of sediment layers of events in the 1240s: the violent contact of the Mongol armies with Western Christendom, contemporary Christian attempts to put the newcomers into known apocalyptic frameworks, and most probably the personal trauma of the author who had been threatened with death after an inaction with the Mongols, might be explained both as a cross-cultural misunderstanding and a display of power. Research results: Comparison of the two accounts, one written by John of Plano Carpini and the other by Simon of Saint

  2. World nuclear power once again in the spotlight. Comments on the 13th Pacfic Basin Nuclear Conference

    International Nuclear Information System (INIS)

    Zang Mingchang; Ruan Keqiang

    2004-01-01

    This paper comments on The 13th Pacific Basin Nuclear Conference held in Shenzhen, China, on October 21/25, 2002 and summarizes some key papers presented in the Conference and viewpoints from their following discussions, which indicates that nuclear power in the world is once again in the spotlight. The Conference shows that in the coming 50 years the roadmap to develop nuclear energy would be divided into two stages: Near-Term Deployment by 2010-2015, some advanced designs were developed for Utilities; Generation IV Program, its overall goal is to identify and develop next-generation nuclear power systems that could be deployed over the next 30 years to help meet the world's energy needs throughout the 21st century. Some visions is the future, such as co-generation of electricity and space heating or desalination, and combination of Generation IV and so-called Hydrogen Economy-the use of hydrogen in vehicle transport to replace petroleum, were presented. As a primary energy source nuclear power is particularly well suited to hydrogen production, offering the almost unique position of large-scale hydrogen production with near-zero emissions. (authors)

  3. Leo Sgouros – Tyrant and Patriot. The Ruler of the Northeastern Peloponnese in the Early 13th Century

    Directory of Open Access Journals (Sweden)

    Viktor N. Chkhaidze

    2017-11-01

    Full Text Available Leo Sgouros is one of the Byzantine magnates who ruled in the northeastern Peloponnese in the late 12th – early 13th centuries. The paper discusses the separatist activity of the Leo Sgouros which allowed him in a short time to create ephemeral ‘state’ in the South of Thessaly, Boeotia, Attica, Corinth and the Argolid. In order to give legitimacy to his authority Leo Sgouros married the daughter of the deposed Emperor Alexios III. But his way from separatism to Imperial idea was interrupted by the clash with the knights of the Latin Empire who have predetermined his defeat. Among the reasons for the defeat we can name the enmity with the clergy and nonpossibility of joining with other governors in fighting the crusaders. According to later legend, Leo Sgouros died, throwing himself with his horse from the cliff of the Acrocorinth fortress, besieged by the crusaders. According to another version, Leo Sgouros died under the walls of his native city Nauplius. The study examined the seal of the Leo Sgouros with a rare title of sebastohypertatos (higher sebastos, and similar seal which was reused by John Branas. Data analysis suggests that such a contradictory personality as Leo Sgouros’ may be characterized not only as an ambitious tyrant and the defender of Byzantine Hellenism. The Annex contains information about the seven of Sgouros names that have become known in recent years by virtue of the monuments of sphragistics.

  4. Hyapproval : final handbook for approval of hydrogen refuelling stations

    NARCIS (Netherlands)

    Wurster, R.; Landinger, H.; Machens, C.; Allidières, L.; Molag, M.; Barron, J.; Reijalt, M.; Hill, H.J.

    2006-01-01

    HyApproval is an EC co-financed Specific Targeted Research Project (STREP) to develop a Handbook facilitating the approval of Hydrogen Refuelling Stations (HRS). The project, started in October 2005, will be performed over 24 months by a balanced partnership including 25 partners from industry, SMEs

  5. Integrated refuelling activity service; Servicio integrado de actividades de recarga

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Valcarcel, M.; Lopez Garcia, J.L.

    2010-07-01

    Refuelling outages at nuclear power plants are subject to demanding improvement criteria in each and every one of the activities scheduled. In this article, the advantages of this general service performed by UTE-TWE for Asco and Vandellos II nuclear power plants, and their results and learned lessons are presented. (Author)

  6. H2USA: Siting Refueling Stations in the Northeast

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, Marc W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zuboy, Jarett [Consultant; Ellis, Steve [Honda

    2017-11-01

    To achieve cost-effective deployment of both fuel cell electric vehicles (FCEVs) and hydrogen stations, the number of vehicles and public stations must grow together in areas of highest demand. This fact sheet introduces two advanced modeling tools and presents preliminary analysis of the hydrogen refueling station locations needed to support early consumer demand for FCEVs in the Northeast United States. United States.

  7. Refueling outage services in Spanish Nuclear Power Plants

    International Nuclear Information System (INIS)

    Landete, J. L.; Soto, M.; Nunuez, A.

    2007-01-01

    DOMINGUIS Group, through its 75 years of business development, has positioned as the Spanish leader Group in Services for the Nuclear Energy and Petrochemical Sectors. In this article, we present the most significant services summary that, through the companies that constitute DOMINGUIS Group, we have developed in Refueling Outage in Spanish Nuclear Power Plants. (Author)

  8. 40 CFR 86.152-98 - Vehicle preparation; refueling test.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Vehicle preparation; refueling test... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles and New Light-Duty Trucks and New Otto-Cycle...

  9. Generalized model development for a cryo-adsorber and 1-D results for the isobaric refueling period

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, V. Senthil [India Science Lab, General Motors Global R and D, Creator Building, International Technology Park, Bangalore 560066 (India); Kumar, Sudarshan [Chemical Sciences and Material Systems Lab, General Motors Global R and D, Warren Technical Center Campus, 30500 Mound Road, Warren, MI 48090 (United States)

    2010-04-15

    We have developed 3-D model equations for a cryo-adsorption hydrogen storage tank, where the energy balance accommodates the temperature and pressure variation of all the thermodynamic properties. We then reduce the 3-D model to the 1-D isobaric system and study the isobaric refueling period, for simplified geometry and charging conditions. The hydrogen capacity evolution predicted by the 1-D axial bed model is significantly different than that predicted by the lumped-parameter model because of the presence of sharp temperature gradients during refueling. The 1-D model predicts a higher hydrogen capacity than the lumped-parameter model. This observation can be rationalized by the fact that a bed with temperature gradients on equilibration should desorb gas, whenever the adsorbed phase entropy is lower than the gas phase entropy. The 1-D analysis of the isobaric refueling period does not show any significant difference in hydrogen capacity evolution among the axial, single and multicartridge annular bed designs. Hence, a multicartridge annular design, though giving a slightly lower pressure drop, does not offer any heat and mass transfer enhancement over the single cartridge design. And, the single cartridge annular design appears to be optimal. (author)

  10. Optimal refueling principle of research and test reactors and its application

    International Nuclear Information System (INIS)

    Peng Feng; Sun Shouhua; Bu Yongxi

    1993-01-01

    Based on basic formula for core refueling, the optimal refueling principle for cores with fuel assemblies of different burnup are suggested. Some conclusions derived from this principle are given. Calculation formula for different refueling scheme and computation programme are derived and used for the HFETR typical core loading with different refueling scheme. With the suggested core fuel consuming index, core fuel managements of 24 cycles in 10 years operation of HFETR were analyzed. Results show that the application of optimal refueling principle can greatly save the fuel consuming. Direction of HFETR core fuel management research was also di cussed

  11. Collaborative networks in the internet of services: 13th IFIP WG 5.5 working conference on virtual enterprises, PRO-VE 2012, Bournemouth, UK, October 2012: proceedings

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Xu, L.; Afsarmanesh, H.

    2012-01-01

    This book constitutes the refereed proceedings of the 13th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2012, held in Bournemouth, UK, in October 2012. The 61 revised papers presented were carefully selected from numerous submissions. They provide a comprehensive overview of

  12. Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Mobile Learning (13th, Budapest, Hungary, April 10-12, 2017)

    Science.gov (United States)

    Sánchez, Inmaculada Arnedillo, Ed.; Isaías, Pedro, Ed.

    2017-01-01

    These proceedings contain the papers and posters of the 13th International Conference on Mobile Learning 2017, which was organised by the International Association for Development of the Information Society (IADIS), in Budapest, Hungary, April 10-12, 2017. The Mobile Learning 2017 Conference seeks to provide a forum for the presentation and…

  13. a Webgis for the Knowledge and Conservation of the Historical Wall Structures of the 13TH-18TH Centuries

    Science.gov (United States)

    Vacca, G.; Pili, D.; Fiorino, D. R.; Pintus, V.

    2017-05-01

    The presented work is part of the research project, titled "Tecniche murarie tradizionali: conoscenza per la conservazione ed il miglioramento prestazionale" (Traditional building techniques: from knowledge to conservation and performance improvement), with the purpose of studying the building techniques of the 13th-18th centuries in the Sardinia Region (Italy) for their knowledge, conservation, and promotion. The end purpose of the entire study is to improve the performance of the examined structures. In particular, the task of the authors within the research project was to build a WebGIS to manage the data collected during the examination and study phases. This infrastructure was entirely built using Open Source software. The work consisted of designing a database built in PostgreSQL and its spatial extension PostGIS, which allows to store and manage feature geometries and spatial data. The data input is performed via a form built in HTML and PHP. The HTML part is based on Bootstrap, an open tools library for websites and web applications. The implementation of this template used both PHP and Javascript code. The PHP code manages the reading and writing of data to the database, using embedded SQL queries. As of today, we surveyed and archived more than 300 buildings, belonging to three main macro categories: fortification architectures, religious architectures, residential architectures. The masonry samples investigated in relation to the construction techniques are more than 150. The database is published on the Internet as a WebGIS built using the Leaflet Javascript open libraries, which allows creating map sites with background maps and navigation, input and query tools. This too uses an interaction of HTML, Javascript, PHP and SQL code.

  14. Wushu Sanda: Color bias, home advantage and motor actions analysis in female matches’ from the 13th World Championships

    Directory of Open Access Journals (Sweden)

    Breno Berny Vasconcelos

    2017-05-01

    Full Text Available Introduction: Wushu Sanda is a mixed orientation combat sport in which athletes duel wearing red or black clothes. Despite its popularity, the knowledge about its technical and psychophysiological aspects are scarce. Objective: The aim of this study was to quantify the motor actions and the color bias and home advantage existence possibility in female matches from the 13th World Wushu Championships, held in Indonesia, 2015. Material and methods: In an observational study were analyzed 46 matches involving 55 athletes. Each match was analyzed twice, and were considered 22 possible techniques (5 types of punches, 5 types of kicks and 12 different throws. All the motor actions were registered for each athlete, aside of match outcome, clothing color and continent of origin. Results: From all applied motor actions, 48.2% were punches, 46.9% were kicks and 4.8% were throws. Athletes applied 11±8.67 punches, 10.7±5.63 kicks and 1.1±1.6 throws per round. The number of throwing techniques applied on the first and second rounds was higher in winners (F=10.24, p=0.002 and F=7.82, p=0.006 respectively. No differences were found in motor behavior among distinct competitive phases (F(3;88=1.87; p=0.140; η2p=0.06. Home advantage was observed supporting Asian athletes (χ2=10.12, p=0.038. Color bias was observed supporting athletes who wore red (χ2=8.52, p=0.004, which won a higher number of matches (65%. Conclusions: To the detriment of grappling actions (throws, female international level Wushu Sanda athletes predominantly used striking motor actions (punches and kicks. Winners applied a higher number of throws than losers. Home advantage was observed supporting Asian athletes. Color bias was observed supporting female athletes who wore red.

  15. Factors Associated with the Persistence of Bullying Victimization From 10th grade to 13th Grade: A Longitudinal Study.

    Science.gov (United States)

    Lien, Lars; Welander-Vatn, Audun

    2013-01-01

    Bullying among adolescents represents a major public health challenge. The aim of this study was to map the stability of bullying victimization across the transitional phase from lower to upper secondary school, and to describe the sociodemographic, academic and health-related characteristics of those bullied during the transition. 3674 Norwegian adolescents were followed longitudinally from the age of 15/16 until the age of 18/19, answering questionnaires about health, academic achievements, life events, lifestyle and sociodemography. The 337 participants reporting exposure to bullying victimization at age 15/16 were the target group, as we made comparisons between those reporting victimization only at the age of 15/16 (n=289) with the participants for whom the bullying had continued into later adolescence (n = 48). 14% of those victimized at age 15/16, reported continuation of bullying victimization into upper secondary school. These adolescents were significantly more likely to report having divorced parents, low parental educational level, poor self-perceived economy, muscle and skeletal pain, symptoms of mental distress, lower school marks in Norwegian and higher body-mass index (BMI) when group differences at age 18/19 were assessed through basic inferential statistical tests. However, the multivariate logistic regression analyses only revealed statistically significantly increased adjusted odds ratios for the variables mental distress and school-marks in Norwegian. The persistence of exposure to bullying from 10th grade to 13th grade is associated with mental health complaints and poor school performance. Preventive measures to take care of students being continuously bullied should be in place in secondary schools.

  16. Potential risk of a criticality event during refuelling

    Energy Technology Data Exchange (ETDEWEB)

    Laurioux, V.; Deschamps, P

    2003-01-01

    Following a core unloading due to an unscheduled shutdown during the cycle of Dampierre unit 4, the plant operator had to operate the refuelling in its previous configuration. During this operation, the fuel assembly concerned by loading step no. 25 was left in the fuel building and the assembly for the following step, no. 26, was placed in the reactor vessel instead of the previous one, causing an irregularity in core pattern only detected at step no. 139. At that point, the refuelling machine operator realized that he was handling an assembly equipped with its rod cluster, whereas according to his handling sheet, the assembly should not be equipped with. Thanks to the favourable conditions (primary system boron concentration = 2345 ppm and cycle burn-up = 2 GWj/tU), the core remained subcritical. However, the incident analysis revealed a potential criticality risk under less favourable circumstances, i.e. refuelling with fresh 1. cycle fuel assemblies and a primary system boron concentration at the lower limit of the range allowed by the Technical Operating Specifications (2000 ppm). Moreover, further studies have shown that the two neutron source range channels (SRC) are able to provide a count rate (reflecting neutron flux) but would not detect a local increase in reactivity under refuelling conditions (normal or defective), unless a reactive pattern was formed in the immediate vicinity of one of the two channels. However, if the criticality is reached, the SRCs are able to diagnose the critical state from the significant power level of 0.1% rated power. The human error that had led to the administrative validation of a fuel handling step that had not been physically carried out highlighted both the fragility of organizational lines of defence and the inadequacy of I and C systems with regard to technical in-depth defence lines. Following these observations, and beyond the preventive measures supposed to limit the occurrence of a divergence during refuelling

  17. Customer exposure to gasoline vapors during refueling at service stations.

    Science.gov (United States)

    Hakkola, M A; Saarinen, L H

    2000-09-01

    Gasoline is a volatile complex mixture of hydrocarbon compounds that is easily vaporized during handling under normal conditions. Modern reformulated gasoline also contains oxygenates to enhance octane number and reduce ambient pollution. This study measured the difference in the exposure of customers to gasoline and oxygenate vapors during refueling in service stations with and without vapor recovery systems. Field measurements were carried out at two self-service stations. One was equipped with Stage I and the other with Stage II vapor recovery systems. At Stage I stations there is vapor recovery only during delivery from road tanker, and at Stage II stations additional vapor recovery during refueling. The exposure of 20 customers was measured at both stations by collecting air samples from their breathing zone into charcoal tubes during refueling with 95-octane reformulated gasoline. Each sample represented two consecutive refuelings. The samples were analyzed in the laboratory by gas chromatography using mass-selective detection for vapor components. The Raid vapor pressure of gasoline was 70 kPa and an oxygen content 2 wt%. Oxygenated gasoline contained 7 percent methyl tert-butyl ether (MtBE) and 5 percent methyl tert-amyl ether (MtAE). The geometric mean concentrations of hydrocarbons (C3-C11) in the customers' breathing zone was 85 mg/m3 (range 2.5-531 mg/m3) at the Stage I service station and 18 mg/m3 (range service station. The geometric mean of the exposure of customers to MtBE during refueling at the Stage I service station was 15.3 mg/m3 (range 1.8-74 mg/m3), and at the Stage II service station 3.4 mg/m3 (range 0.2-16 mg/m3). The differences in exposure were statistically significant (p station. The measurements were done on consecutive days at the various service stations. The temperature ranged from 10 to 17 degrees C, and wind velocity was 2-4 m/s. The climatic conditions were very similar on the measurement days. Based on this study it was found

  18. The 13th International Workshop on H-mode Physics and Transport Barriers (Oxford, UK, 2011) The 13th International Workshop on H-mode Physics and Transport Barriers (Oxford, UK, 2011)

    Science.gov (United States)

    Saibene, G.

    2012-11-01

    The 13th International Workshop on H-mode Physics and Transport Barriers, held in Lady Margaret Hall College in Oxford in October 2011 continues the tradition of bi-annual international meetings dedicated to the study of transport barriers in fusion plasmas. The first meeting of this series took place in S Diego (CA, US) in 1987, and since then scientists in the fusion community studying the formation and effects of transport barriers in plasmas have been meeting at this small workshop to discuss progress, new experimental evidence and related theoretical studies. The first workshops were strongly focussed on the characterization and understanding of the H-mode plasma, discovered in ASDEX in 1982. Tokamaks throughout the entire world were able to reproduce the H-mode transition in the following few years and since then the H-mode has been recognised as a pervasive physics feature of toroidally confined plasmas. Increased physics understanding of the H-mode transition and of the properties of H-mode plasmas, together with extensive development of diagnostic capabilities for the plasma edge, led to the development of edge transport barrier studies and theory. The H-mode Workshop reflected this extension in interest, with more and more contributions discussing the phenomenology of edge transport barriers and instabilities (ELMs), L-H transition and edge transport barrier formation theory. In the last 15 years, in response to the development of fusion plasma studies, the scientific scope of the workshop has been broadened to include experimental and theoretical studies of both edge and internal transport barriers, including formation and sustainment of transport barriers for different transport channels (energy, particle and momentum). The 13th H-mode Workshop was organized around six leading topics, and, as customary for this workshop, a lead speaker was selected for each topic to present to the audience the state-of-the-art, new understanding and open issues, as well

  19. Performance of a rapidly-refuelable aluminum-air battery

    Science.gov (United States)

    Levy, D. J.; Hollandsworth, R. P.; Gonzales, E. M.; Littauer, E. L.

    The Al-air battery is being developed to provide an electric vehicle with conventional automobile performance. A rapidly-refuelable, 6-cell battery (200-sq cm electrodes) was evaluated. RX-808 aluminum anodes and air cathodes were used with a flowing alkaline electrolyte. Peak power was found to increase with temperature, decrease with aluminate concentration and be unaffected by electrolyte flow. The best performance was 5.28 kW/sq m peak power density, 2.08 kWh/kg Al energy density and 80 percent coulombic efficiency. Anode refueling is rapid and 100 percent utilization is achieved. Additional evaluation included cathode catalysts, a thermal balance and monitoring electrolyte composition.

  20. Refueling device for a nuclear reactor with fast neutrons

    International Nuclear Information System (INIS)

    Artemev, L.N.; Vitalevitsch, K.V.

    1978-01-01

    The refueling device has got a drum-shaped cartridge containing cells for unirradiated fuel assemblies and control rods as well as a grab for manipulation. The cells for the fuel assemblies are identical with those for the control rods. For the control rods in stock and those on the way from the drum-shaped magazine to the refueling mechanism there are provided cup-shaped casings (adapters) adapting their ends to the dimensions of the fuel assemblies. The casing is clamped to an annular tee-slot below the top by means of a collet. By this means fuel assemblies as well as control rods can be handled with the grab. By means of a stop on the grab the casing can be detached from the control rod. (DG) [de

  1. Television alignment of mast assembly in refueling of nuclear reactor

    International Nuclear Information System (INIS)

    Kaufmann, J.W.; Swidwa, K.J.; Hornak, L.P.

    1990-01-01

    This patent describes the refueling of a nuclear reactor having component assemblies of at least one type and being disposed in a pit in a containment under water, the refueling being carried out with a mast movable axially and circumferentially for raising and lowering the component assemblies, a mechanism, connected to an end of the mast, cooperative with the mast, for engaging a component assembly to be raised by the mast, a television camera, and a television monitor having an image-reference indication, the mechanism being connected to the mast movable with the mast; the method of positioning the mechanism to engage the component assembly appropriately for raising and lowering. It comprises: mounting the camera on the mechanism movable therewith, suspending the mast in the water of the pit with the mechanism extending from the end of the mast in the pit in position to engage the component assembly

  2. Business fleet refueling assessment. Final report, March 1992-November 1992

    International Nuclear Information System (INIS)

    Chaudier, A.

    1993-01-01

    The report investigates refueling characteristics and capabilities for the light-duty market sector, particularly business automobile fleets. It develops a profile of the characteristics of light-duty and automobile business fleets in 22 designated non-attainment areas, as well as Pittsburgh and Salt Lake City. Reliable data on these subjects will enable better analysis of the market potential for natural gas in the surveyed areas

  3. On the Drag Effect of a Refuelling Pellet

    DEFF Research Database (Denmark)

    Chang, Tinghong; Michelsen, Poul

    1981-01-01

    A refueling pellet is subjected mainly to two kinds of drags: (1) inertial drag caused by the motion of the pellet relative to the surrounding plasma, and (2) ablation drag caused by an uneven ablation rate of the front and the rear surface of the pellet in an inhomogeneous plasma. Computational ...... results showed that for reasonable combinations of pellet size and injection speed, the drag effect is hardly detectable for plasma conditions prevailing in current large tokamaks....

  4. RBMK full scope simulator gets virtual refuelling machine

    International Nuclear Information System (INIS)

    Khoudiakov, M.; Slonimsky, V.; Mitrofanov, S.

    2006-01-01

    The paper describes a continuation of efforts of an international Russian-Norwegian joint team to drastically increase operational safety during the refuelling process of an RBMK-type reactor by implementing a training simulator based on an innovative Virtual Reality (VR) approach. During the preceding stage of the project a display-based simulator was extended with VR models of the real Refueling Machine (RM) and its environment in order to improve both the learning process and operation's effectiveness. The simulator's challenge is to support the performance (operational activity) of RM operational staff firstly and to take major part in developing basic knowledge and skills as well as to keep skilled staff in close touch with the complex machinery of the Refueling Machine. At the given 2nd stage the functional scope of the VR-simulator was greatly enhanced - firstly, by connecting to the RBMK-unit full-scope simulator, and, secondly, by a training program and simulator model upgrade. (author)

  5. Automated Aerial Refueling Hitches a Ride on AFF

    Science.gov (United States)

    Hansen, Jennifer L.; Murray, James E.; Bever, Glenn; Campos, Norma V.; Schkolnik, Gerard

    2007-01-01

    The recent introduction of uninhabited aerial vehicles [UAVs (basically, remotely piloted or autonomous aircraft)] has spawned new developments in autonomous operation and posed new challenges. Automated aerial refueling (AAR) is a capability that will enable UAVs to travel greater distances and loiter longer over targets. NASA Dryden Flight Research Center, in cooperation with the Defense Advanced Research Projects Agency (DARPA), the Naval Air Systems Command (NAVAIR), the Naval Air Force Pacific Fleet, and the Air Force Research Laboratory, rapidly conceived and accomplished an AAR flight research project focused on collecting a unique, high-quality database on the dynamics of the hose and drogue of an aerial refueling system. This flight-derived database would be used to validate mathematical models of the dynamics in support of design and analysis of AAR systems for future UAVs. The project involved the use of two Dryden F/A-18 airplanes and an S-3 hose-drogue refueling store on loan from the Navy. In this year-long project, which was started on October 1, 2002, 583 research maneuvers were completed during 23 flights.

  6. Engineering study of frequent refueling for improved uranium utilization in pressurized water reactors

    International Nuclear Information System (INIS)

    Bernstein, I.

    1981-05-01

    The most practical alternative to annual refueling appeared to be semiannual refueling, with a short midyear refueling-only outage scheduled during minimum power demand and an annual outage during which maintenance outage tasks would be performed. A method for economic evaluation of frequent refueling was developed using fuel loading requirements, refueling frequency, replacement power costs and the price of uranium oxide as parameters and the economics evaluated with the costs anticipated for the year 1995. It was determined that to obtain breakeven energy costs, the extra semiannual refueling outage would have to be accomplished in six to nine days for most plants. Although it could not practicably be reduced to that level, proposed changes to arrangement, procedures and equipment indicated that an outage of from eleven to thirteen days was possible. Total cost of implementing these changes is estimated at less than 4% of the overall physical plant cost. This cost can be justified based on the time saved during refueling outages over the reactor lifetime. These changes were generally defined while a detailed design review was made of a fuel-handling system which utilizes two cantilever-supported refueling machines and two transfer systems, allowing independent and simultaneous handling of two fuel assemblies during the refueling sequence. A review of the critical path annual maintenance items indicated that these items would probably control the length of the annual refueling outage

  7. The institutions forming the socioeconomic structure of Turkish private enterprises between the 13th and the 19th centuries

    Directory of Open Access Journals (Sweden)

    Mehmet Özbirecikli

    2015-04-01

    principios éticos de la vida empresarial, en esencia, son los mismos. Dentro de este contexto, nos atrevemos a sugerir que las raíces del código ético de la vida empresarial turca se retrotraen en la historia a hace más de 800 años. Además, la similitud entre el funcionamiento presente y pasado indica que el origen de la formación de los aprendices para las empresas turcas tiene, igualmente, más de 800 años de historia.This study investigates three institutions forming the socioeconomic structure of Turkish private enterprises between the 13th and 19th Centuries: Akhism (13th-16th century, the Lonca System (the Guilds (16th-18th century, and the Gedik (Monopoly System (18th-20th century. The study particularly focuses on the social and economic rules, vocational training process, and organizational structure of the said institutions in order to discuss the effects of the socioeconomic structure of Turkish enterprises on economic and social development of private enterprises. The study also struggles to link between the relevant current applications and the applications in the past such as the social rules and vocational training. From economic point of view, both the statist structure of the State and the economic rules of the institutions herein caused private enterprises to remain small, and prevented them from having a competitive environment and having capital accumulation. As a result, enterprises could not benefit from new production techniques and the Turkish enterprise mentality fell behind modern developments On the other hand, although these three systems were completely abolished in the early 20th Century, it is seen that especially traces of the Akhism and Lonca systems have still been surviving. Both the most of rules of Akhism and some of the duties of the board of directors of Lonca such as keeping moral standards of production and trade remind us of professional code of ethics of today's modern business life. In other saying, there was code of

  8. Development and operating performance of the refuelling machine of the Fugen

    International Nuclear Information System (INIS)

    Kaneko, Jun; Kasai, Yoshimitsu; Takeshita, Norito; Ohta, Takeo

    1985-01-01

    In the advanced thermal reactor ''Fugen'' power station, with the refuelling machine the fuel replacement during operation is made through the reactor bottom. Its design was started in 1967 and up to 1975 various tests were conducted. Fugen's refuelling machine has thus been used from the initial fuel loading in 1978 and handled so far about 1300 fuel assemblies in seven times of the refuelling. In the stage of Fugen operation there occurred failure of the grab drive due to crud, etc. At present, with such troubles all eliminated, the refuelling machine is in steady operation with proper maintenance. The results with Fugen's refuelling machine are reflected in the development of the refuelling machine for the demonstration ATR. (Mori, K.)

  9. Development and implementation of full-automatic supervision and control programme for CEFR refueling control system

    International Nuclear Information System (INIS)

    Zhu Hao; Dong Shengguo; Ma Hongsheng; Zhao Lixia

    2011-01-01

    In order to make the process of CEFR refueling more convenient and reliable, the computer supervision and control system was designed according to the CEFR refueling technology. Meanwhile, the supervision and control function and database function were developed on the basis of KingView and SQL Server2000. The fuel of reactor core was fully loaded by the system, and full-automation of CEFR refueling process was implemented. (authors)

  10. Status of small reactor designs without on-site refuelling

    International Nuclear Information System (INIS)

    2007-01-01

    There is an ongoing interest in member states in the development and application of small and medium sized reactors (SMRs). In the near term, most new NPPs are likely to be evolutionary designs building on proven systems while incorporating technological advances and often the economics of scale, resulting from the reactor outputs of up to 1600 MW(e). For the longer term, the focus is on innovative designs aiming to provide increased benefits in the areas of safety and security, non-proliferation, waste management, resource utilization and economy, as well as to offer a variety of energy products and flexibility in design, siting and fuel cycle options. Many innovative designs are reactors within the small-to-medium size range, having an equivalent electric power less than 700 MW(e) or even less than 300 MW(e). A distinct trend in design and technology development, accounting for about half of the SMR concepts developed worldwide, is represented by small reactors without on-site refuelling. Such reactors, also known as battery-type reactors, could operate without reloading and shuffling of fuel in the core over long periods, from 5 to 25 years and beyond. Upon the advice and with the support of IAEA member states, within its Programme 1 'Nuclear Power, Fuel Cycle, and Nuclear Science', the IAEA provides a forum for the exchange of information by experts and policy makers from industrialized and developing countries on the technical, economic, environmental, and social aspects of SMRs development and implementation in the 21st century, and makes this information available to all interested Member States by producing status reports and other publications dedicated to advances in SMR technology. The objective of this report is to provide Member States, including those just considering the initiation of nuclear power programmes and those already having practical experience in nuclear power, with a balanced and objective information on important development trends and

  11. Preface: Proceedings of the 13th Conference on Liquid and Amorphous Metals (LAM13) (Ekaterinburg, Russia, 8 14 July 2007)

    Science.gov (United States)

    Popel, Pjotr; Gelchinskii, Boris; Sidorov, Valeriy

    2008-03-01

    The most recent developments in the field of liquid and amorphous metals and alloys are regularly updated through two complementary international conferences: the liquid and amorphous metals conference (LAM) and the rapidly quenched materials (RQ) conference. The first series of conferences started as LM1 in 1966 at Brookhaven for the basic understanding of liquid metals. The subsequent LM conferences were held in Tokyo (1972) and Bristol (1976). The conference was renewed in Grenoble (1980) as a LAM conference including amorphous metals and continued in Los Angeles (1983), Garmisch-Partenkirchen (1986), Kyoto (1989), Vienna (1992), Chicago (1995), Dortmund (1998), Yokohama (2001) and Metz (2004). The conferences are mainly devoted to liquid and amorphous metals and alloys. However, communications on some non-metallic systems such as semiconductors, quasicrystals etc, are also accepted. The conference tradition strongly encourages participation from junior researchers and graduate students. The 13th conference of the LAM series was organized in Ekaterinburg, Russia, by the Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences (IMet UB RAS) and the Ural State Pedagogical University (USPU), and held from 8-14 July 2007 under the chairmanship of Professors Pjotr Popel (USPU) and Boris Gelchinskii (IMet UB RAS). Two hundred and forty two active participants and about 60 guest participants from 20 countries attended the conference. There were no parallel sessions and all oral reports were separated into three groups: invited talks (40 min), full-scale oral reports (25 min), and brief oral reports (15 min). The program included ten sessions, ranging from purely theoretical subjects to the technological application of molten and amorphous alloys. The following sessions took place: A: Electronic structure and transport, magnetic properties; B: Phase transitions; C: Structure; D: Atomic dynamics and transport; E: Thermodynamics; F: Modelling

  12. Liquefied petroleum gas cold burn sustained while refueling a car.

    Science.gov (United States)

    Scarr, Bronwyn; Mitra, Biswadev; Maini, Amit; Cleland, Heather

    2010-02-01

    There have been few cases of cold burn related to the exposure of liquid petroleum gas (LPG). We present the case of a young woman exposed to LPG while refueling her car who sustained partial thickness burns to the dorsum of her hand. Contact with LPG leaking from a pressurized system causes tissue damage because of cold injury. Immediate management of LPG is extrapolated from the management of frostbite. The increasing use of LPG mandates an awareness of prevention strategies and management principles in the setting of adverse events.

  13. Some novel on-power refuelling features of CANDU stations

    International Nuclear Information System (INIS)

    Erwin, D.; Pendlebury, B.; Watson, J.F.; Welch, A.C.

    1976-01-01

    Part A of the paper describes the reasons for, and advantages resulting from, the use of flow assisted refuelling in the CANDU type nuclear reactors at the Pickering Generating Station. A separate fuel handling system is used for each reactor unit, as distinct from the system employed at the Bruce Generating station, where the fuel handling system is shared among several units. Part B of the paper describes some of the advantages of the shared concept with particular emphasis on the availability of the fuel handling system. (author)

  14. Insights from Hydrogen Refueling Station Manufacturing Competitiveness Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mayyas, Ahmad

    2015-12-18

    In work for the Clean Energy Manufacturing Analysis Center (CEMAC), NREL is currently collaborating with Great Lakes Wind Network in conducting a comprehensive hydrogen refueling stations manufacturing competitiveness and supply chain analyses. In this project, CEMAC will be looking at several metrics that will facilitate understanding of the interactions between and within the HRS supply chain, such metrics include innovation potential, intellectual properties, learning curves, related industries and clustering, existing supply chains, ease of doing business, and regulations and safety. This presentation to Fuel Cell Seminar and Energy Exposition 2015 highlights initial findings from CEMAC's analysis.

  15. Lainsa refueling specific services. Ideas of an evolution

    International Nuclear Information System (INIS)

    Soto Tomas, M.

    2010-01-01

    The knowledge evolution, in relation to works to develop in Refueling, related to the Cleaning and Decontamination, changed from almost total ignorance to be a reality, thanks personnel support and external organizations, already knowledgeable of the same, and to the human team effort highly involved in the fulfillment of the management development. We search where to find knowledge and we did it. We had ideas and we became them truth. The evolutionary process was positive. Some stages, equipment and developed services are commented, which allow us to offer High Quality Services and in agreed time term, especially during c ritical path . (Author)

  16. CLEO: A knowledge-based refueling assistant at FFTF

    International Nuclear Information System (INIS)

    Smith, D.E.; Kocher, L.F.; Seeman, S.E.

    1985-07-01

    CLEO is computer software system to assist in the planning and performance of the reactor refueling operations at the Fast Flux Test Facility. It is a recently developed application of artificial intelligence software with both expert systems and automated reasoning aspects. The computer system seeks to organize the sequence of core component movements according to the rules and logic used by the expert. In this form, CLEO has aspects which tie it to both the expert systems and automated reasoning areas within the artificial intelligence field

  17. The 13th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2013)

    Science.gov (United States)

    Mitcheson, Paul; Beeby, Steve

    2013-12-01

    It is a pleasure to welcome you to The Royal Society in London and the 13th International Conference on Micro- and Nano-Technology for Power Generation and Energy Conversion Applications, or PowerMEMS 2013. The objective of PowerMEMS 2013 is to catalyse innovation in miniature, micro- and nano-scale technologies for power generation and energy conversion. The conference aims to stimulate the exchange of insights and information, and the development of new ideas in the Power MEMS/NEMS field as well as at the meso-scale. It will allow the attendees to interact and network within our multidisciplinary community that includes professionals from many branches of science and engineering. The technical program is led by four invited speakers covering inductive power transfer, chip scale power sources, thermal energy harvesting and implantable biofuel cells. We received 177 abstracts and following a careful reviewing process by the Technical Program Committee a total of 137 papers were selected for presentation. These have been organised into 16 oral sessions in two parallel streams and two poster sessions that have been augmented by 10 late news papers. The oral and regular poster papers are, for the first time, being published by the Institute of Physics. We have made every effort to make PowerMEMS 2013 the busiest yet and have included for the first time the PowerMEMS School. This two-day school held at Imperial College London covered a wide range of power-MEMS topics including technologies for power generation, power transmission, energy storage, power electronics interfaces and metrology. Registrations for the School exceeded our expectations and it was full by early November. We hope this, and other activities such as the Discussion Panel and the inclusion of late news papers, will make PowerMEMS 2013 a memorable success. We have also reached out to new communities, such as those working in wireless power transfer and RF harvesting to broaden the technology remit of

  18. Optimal Refueling Pattern Search for a CANDU Reactor Using a Genetic Algorithm

    International Nuclear Information System (INIS)

    Quang Binh, DO; Gyuhong, ROH; Hangbok, CHOI

    2006-01-01

    This paper presents the results from the application of genetic algorithms to a refueling optimization of a Canada deuterium uranium (CANDU) reactor. This work aims at making a mathematical model of the refueling optimization problem including the objective function and constraints and developing a method based on genetic algorithms to solve the problem. The model of the optimization problem and the proposed method comply with the key features of the refueling strategy of the CANDU reactor which adopts an on-power refueling operation. In this study, a genetic algorithm combined with an elitism strategy was used to automatically search for the refueling patterns. The objective of the optimization was to maximize the discharge burn-up of the refueling bundles, minimize the maximum channel power, or minimize the maximum change in the zone controller unit (ZCU) water levels. A combination of these objectives was also investigated. The constraints include the discharge burn-up, maximum channel power, maximum bundle power, channel power peaking factor and the ZCU water level. A refueling pattern that represents the refueling rate and channels was coded by a one-dimensional binary chromosome, which is a string of binary numbers 0 and 1. A computer program was developed in FORTRAN 90 running on an HP 9000 workstation to conduct the search for the optimal refueling patterns for a CANDU reactor at the equilibrium state. The results showed that it was possible to apply genetic algorithms to automatically search for the refueling channels of the CANDU reactor. The optimal refueling patterns were compared with the solutions obtained from the AUTOREFUEL program and the results were consistent with each other. (authors)

  19. Modeling Hydrogen Refueling Infrastructure to Support Passenger Vehicles †

    Directory of Open Access Journals (Sweden)

    Matteo Muratori

    2018-05-01

    Full Text Available The year 2014 marked hydrogen fuel cell electric vehicles (FCEVs first becoming commercially available in California, where significant investments are being made to promote the adoption of alternative transportation fuels. A refueling infrastructure network that guarantees adequate coverage and expands in line with vehicle sales is required for FCEVs to be successfully adopted by private customers. In this paper, we provide an overview of modelling methodologies used to project hydrogen refueling infrastructure requirements to support FCEV adoption, and we describe, in detail, the National Renewable Energy Laboratory’s scenario evaluation and regionalization analysis (SERA model. As an example, we use SERA to explore two alternative scenarios of FCEV adoption: one in which FCEV deployment is limited to California and several major cities in the United States; and one in which FCEVs reach widespread adoption, becoming a major option as passenger vehicles across the entire country. Such scenarios can provide guidance and insights for efforts required to deploy the infrastructure supporting transition toward different levels of hydrogen use as a transportation fuel for passenger vehicles in the United States.

  20. Options for shortening nuclear power plant refueling outages

    International Nuclear Information System (INIS)

    Kastl, H.

    2001-01-01

    Deregulation of the European electricity market on 01.01.1999 forced a large number of electric utilities- especially nuclear power plant operators - to find ways of drastically cutting down their costs in order to be able to compete successfully within the new market environment. Nuclear power plants currently in operation mainly have three potential ways of reducing their power generating costs: by increasing plant availability, reducing fuel costs and cutting down operating costs. The optimization of plant refueling outages offers considerable potential for enhancing plant availability, but also helps bring down operating costs by reducing expenditure on maintenance. In order to optimize an outage in terms of its duration and costs, a variety of approaches are possible - all of which, however, involve certain key factors such as good organization, planning, logistics and control, improvement of equipment and tools, as well as motivation of personnel. Another aspect is the introduction of innovative technologies. In the last few years, such technologies have frequently enabled maintenance effort to be reduced, thus saving considerable time, and have also resulted in a need for fewer personnel to carry out the work, thus reducing radiation exposure. In many instances they have also improved the quality of work and outage performance as a whole. The paper uses recent examples to show how innovative technologies can contribute to-wards reducing nuclear plant maintenance costs and shorten the duration of refueling out-ages. (author)

  1. BWR Servicing and Refueling Improvement Program: Phase I summary report

    Energy Technology Data Exchange (ETDEWEB)

    Perry, D.R.

    1978-09-01

    Under the U.S. Department of Energy sponsorship, General Electric Co. (GE) undertook a study of boiling water reactor (BWR) refueling outages for the purpose of recommending the development and demonstration of critical path time savings improvements. The Tennessee Valley Authority (TVA) joined the study as a subcontractor, providing monitoring assistance and making the Browns Ferry Site available for improvement demonstrations. Agreement was also reached with Georgia Power Co., Power Authority of the State of New York, and Commonwealth Edison Co. for monitoring and data collection at Hatch 1, FitzPatrick, and Quad Cities 1 nuclear plants, respectively. The objective was to identify, develop, and demonstrate improved refueling, maintenance, and inspection procedures and equipment. The improvements recommended in this study are applicable to BWR nuclear plants currently in operation as well as those in the design and construction phases. The recommendations and outage information can be used as a basis to plan and conduct the first outages of new plants and to improve the planning and facilities of currently operating plants. Many of the recommendations can readily be incorporated in plants currently in the design and construction phases as well as in the design of future plants. Many of these recommended improvements can be implemented immediately by utilities without further technical development.

  2. Fire Protection Engineering Design Brief Template. Hydrogen Refueling Station.

    Energy Technology Data Exchange (ETDEWEB)

    LaFleur, Angela Christine [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Muna, Alice Baca [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Groth, Katrina M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    Building a hydrogen infrastructure system is critical to supporting the development of alternate- fuel vehicles. This report provides a methodology for implementing a performance-based design of an outdoor hydrogen refueling station that does not meet specific prescriptive requirements in NFPA 2, The Hydrogen Technologies Code . Performance-based designs are a code-compliant alternative to meeting prescriptive requirements. Compliance is demonstrated by comparing a prescriptive-based fueling station design with a performance-based design approach using Quantitative Risk Assessment (QRA) methods and hydrogen risk assessment tools. This template utilizes the Sandia-developed QRA tool, Hydrogen Risk Analysis Models (HyRAM), which combines reduced-order deterministic models that characterize hydrogen release and flame behavior with probabilistic risk models to quantify risk values. Each project is unique and this template is not intended to account for site-specific characteristics. Instead, example content and a methodology are provided for a representative hydrogen refueling site which can be built upon for new hydrogen applications.

  3. BWR Servicing and Refueling Improvement Program: Phase I summary report

    International Nuclear Information System (INIS)

    Perry, D.R.

    1978-09-01

    Under the U.S. Department of Energy sponsorship, General Electric Co. (GE) undertook a study of boiling water reactor (BWR) refueling outages for the purpose of recommending the development and demonstration of critical path time savings improvements. The Tennessee Valley Authority (TVA) joined the study as a subcontractor, providing monitoring assistance and making the Browns Ferry Site available for improvement demonstrations. Agreement was also reached with Georgia Power Co., Power Authority of the State of New York, and Commonwealth Edison Co. for monitoring and data collection at Hatch 1, FitzPatrick, and Quad Cities 1 nuclear plants, respectively. The objective was to identify, develop, and demonstrate improved refueling, maintenance, and inspection procedures and equipment. The improvements recommended in this study are applicable to BWR nuclear plants currently in operation as well as those in the design and construction phases. The recommendations and outage information can be used as a basis to plan and conduct the first outages of new plants and to improve the planning and facilities of currently operating plants. Many of the recommendations can readily be incorporated in plants currently in the design and construction phases as well as in the design of future plants. Many of these recommended improvements can be implemented immediately by utilities without further technical development

  4. 40 CFR 86.1825-08 - Durability demonstration procedures for refueling emissions.

    Science.gov (United States)

    2010-07-01

    ..., statistical analyses, additional data, or other information which is relevant to the decision. The... Durability demonstration procedures for refueling emissions. This section applies to 2008 and later model...-duty rules as allowed under the provisions of § 86.1801-01(c)(1) which are subject to refueling loss...

  5. Plasma density measurements on refuelling by solid hydrogen pellets in a rotating plasma

    International Nuclear Information System (INIS)

    Joergensen, L.W.; Sillesen, A.H.

    1978-01-01

    The refuelling of a plasma by solid hydrogen pellets situated in the plasma is investigated. Nearly half of the pellet material is evaporated and seems to be completely ionized, resulting in an increase of the amount of plasma equivalent to one third of the total amount of plasma without refuelling. The gross behaviour of the plasma is not changed. (author)

  6. The Feasibility of Pellet Re-Fuelling of a Fusion Reactor

    DEFF Research Database (Denmark)

    Chang, Tinghong; Jørgensen, L. W.; Nielsen, P.

    1980-01-01

    The feasibility of re-fuelling a fusion reactor by injecting pellets of frozen hydrogen isotopes is reviewed. First a general look is taken of the dominant energy fluxes received by the pellet, the re-fuelling rate required and the relation between pellet size, injection speed and frequency...

  7. The application of AI-based refueling control system to the Fugen NPP

    International Nuclear Information System (INIS)

    Maeda, Koichi; Nakamura, Shinji; Kawasaki, Noboru; Nanko, Takashi; Nishimura, Hiroshi; Tanaka, Koichi

    1996-01-01

    In a refueling operation of the Advanced Thermal Reactor Fugen, it is essential to precisely handle fuel assemblies to guarantee quality and from the standpoint of safety guard. In order to plan and execute efficient operations, knowledge of experienced operators based on experiences is required. Therefore, an automatic control system based on the Artificial Intelligence (AI) technology has been developed, and has been put into operation in actual refueling operations. This system prepares an optimum refueling plan, controls the fuel handling facilities by that plan, displays and prints out the history of transfer and storage of items by automatically sampled data on a work station, a network to express fuel handling facilities and operational rules acquired through operating experiences. The development of this system has made it possible to optimize refueling schedule, save control labor of items and improve reliability of refueling. Firstly the development started the off-line system that prepares optimum refueling plan and gives to the operator step by step instructions for operation, secondly developed the on-line system that automatically controls facilities by that plan. The development of this system started in 1989, the off-line system has been put into practical operation in the 17th refueling in 1991, the 22nd (12th annual inspection) refueling in 1995 has been done by using the on-line system automatically

  8. 1200 FPD refuelling simulation of RUFIC fuel in a CANDU 6 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soon Young; Jeong, Chang Joon; Min, Byung Joo; Suk, Ho Chun

    2001-07-01

    The refuelling strategy of RUFIC (Recovered Uranium Fuel in CANDU) fuel as a high-burnup fuel for a CANDU 6 reactor is studied to determine the achievable operation characteristics of the fuel and reactor. In this study, three refuelling schemes of 4-, 2-, and 3-bundle shift for 0.92 w/o RUFIC fuel in an CANDU 6 reactor were individually evaluated through 1200 FPD(Full Power Day)refuelling simulaltions where the 0.92 w/o RUFIC is equivalent to CANFLEX 0.9 w/o SEU(Slightly Enriched Uranium) in reactivity and burnup respects. The computer code system used for this study is WIMS-AECL/DRAGON/RFSP. The results simulated for the case of 4-bundle shift refueling scheme shows that the peak maximum channel power and peak maximum CPPF(Channel Power Peaking Factor)of 7228 kW and 1.175, respectively, seems too high to maintain the available operating margins, because some data of the maximum channel power exceed the operating limit(7070 kW based on the Technical Specifications of Wolsong 3 and 4 Units). Whereas, the results simulated for the case of 2-bundle shift refuelling scheme shows that sufficient operating margin could be secured where the peak maximum channel power and peak maximum CPPF were 6889 kW and 1.094, respectively. However, the channel refuelling rate (channels/day) of the 2-bundle shift refuelling scheme is twice that of the 4-bundle shift refuelling scheme, and hence the 2-bundle shift refuelling would not be an economical refuelling scheme for the RUFIC fuel bundles. Therefore, a 3-bundle shift refuelling scheme for the RUFIC fuel in CANDU 6 reactor was also studied by the 1200 FPD refuelling simulation. As a result, it is found that all the operating parameters in the 3-bundle shift case are achivable for the CANDU 6 reactor operation, and the channel refuelling rate of 2.88 channels/day seems to be attractive compared to the refuelling rate of 4.32 channels/day in the 2-bundle shift case.

  9. Meeting report: GSC M5 roundtable at the 13th International Society for Microbial Ecology meeting in Seattle, WA, USA August 22-27, 2010

    Science.gov (United States)

    Gilbert, Jack A.; Meyer, Folker; Knight, Rob; Field, Dawn; Kyrpides, Nikos; Yilmaz, Pelin; Wooley, John

    2010-01-01

    This report summarizes the proceedings of the Metagenomics, Metadata, Metaanalysis, Models and Metainfrastructure (M5) Roundtable at the 13th International Society for Microbial Ecology Meeting in Seattle, WA, USA August 22-27, 2010. The Genomic Standards Consortium (GSC) hosted this meeting as a community engagement exercise to describe the GSC to the microbial ecology community during this important international meeting. The roundtable included five talks given by members of the GSC, and was followed by audience participation in the form of a roundtable discussion. This report summarizes this event. Further information on the GSC and its range of activities can be found at http://www.gensc.org. PMID:21304725

  10. Meeting report: GSC M5 roundtable at the 13th International Society for Microbial Ecology meeting in Seattle, WA, USA August 22-27, 2010.

    Science.gov (United States)

    Gilbert, Jack A; Meyer, Folker; Knight, Rob; Field, Dawn; Kyrpides, Nikos; Yilmaz, Pelin; Wooley, John

    2010-12-15

    This report summarizes the proceedings of the Metagenomics, Metadata, Metaanalysis, Models and Metainfrastructure (M5) Roundtable at the 13th International Society for Microbial Ecology Meeting in Seattle, WA, USA August 22-27, 2010. The Genomic Standards Consortium (GSC) hosted this meeting as a community engagement exercise to describe the GSC to the microbial ecology community during this important international meeting. The roundtable included five talks given by members of the GSC, and was followed by audience participation in the form of a roundtable discussion. This report summarizes this event. Further information on the GSC and its range of activities can be found at http://www.gensc.org.

  11. The end of the nuclear power generation. On the recommendations of the ethics committee according to the 13th amendment to the Atomic Energy Act

    International Nuclear Information System (INIS)

    Becker, Peter

    2011-01-01

    With the 13th Amendment to the Atomic Energy Act the nuclear consequences of the earthquake disaster in Japan will result in an end to nuclear power generation in Germany. Here, the legislature resorted to unusual methods. For the first time, the legislature received advices from the ''ethics committee reliable energy supply''. This Ethics Commission adopted its recommendations ''on behalf of the Chancellor'' in the period from 4th April to 28th May, 2011. The understanding of this development, its epochal character and speed of decision-making requires an excursion into the economic history and the establishment of nuclear power generation with their legal protection.

  12. Cooperative observations of air showers in Tasmania looking for anisotropies in 10 to the 13th - 10 to the 14th eV primaries /COALA project/

    Science.gov (United States)

    Fenton, A. G.; Fenton, K. B.; Humble, J. E.; Jacklyn, R. M.; Vrana, A.; Murakami, K.; Fujii, Z.; Yamada, T.; Sakakibara, S.; Fujimoto, K.; Ueno, H.; Nagashima, K.; Kondo, I.

    Observations of cosmic ray air showers in Tasmania beginning in 1981 are discussed. The shower array consists of 18 unit trays of 4-sq m proportional counters deployed over an area of 20 m x 160 m, and showers around a median primary energy of 5 x 10 to the 13th are to be observed. The observations are carried out in order to catch cosmic ray flows in a stereoscopic manner with simultaneous observations in the northern hemisphere, and the shower frequency in a fundamental coincidence mode is expected to be about 16,000 events per year.

  13. New selection criteria for channel refueling of a Candu-6 reactor: introduction to floppy rules

    International Nuclear Information System (INIS)

    Brissette, D.

    2001-01-01

    A revised set of rules is in use at Gentilly-2 NGS for the selection of channels for refuelling. Traditional hard channel rejection rules (of go/no-go type) have been replaced by a more efficient set of soft evaluation rules based on concepts borrowed to the Fuzzy Logic. New evaluation rules, labelled as 'Floppy Rules', enable to assess and rate the channel suitability for refuelling by using a smooth and natural continuum of values qualifying excellent, good, fair and poor choices. Global channel suitability for refuelling is measured by combining separate ratings obtained from individual evaluation rules. Each evaluation rule is based on a specific control parameter related to local or lumped core properties. Two new software codes (NEWRULES and REFUEL) designed around the concept of Floppy Rules enable to perform a very efficient selection of optimized channel refuelling sequences either in manual and automatic mode. (author)

  14. Selected Lectures of the 13th International Workshop on Neonatology; Cagliari (Italy; October 25th-28th, 2017

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2017-10-01

    Full Text Available Selected Lectures of the 13th International Workshop on Neonatology • The power of Epigenetics • Twins: identical but different • Cagliari (Italy • October 25th-28th, 2017LECT 1. ASPHYXIA IN THE THIRD MILLENNIUM: FROM VIRGINIA APGAR TO METABOLOMICS • O.D. SaugstadLECT 2. INTRAPARTUM FETAL MONITORING: WHERE ARE WE NOW? • D. Ayres-de-CamposLECT 3. THERAPEUTIC HYPOTHERMIA: REVISED IN­DI­CA­TIONS • E. SalibaLECT 4. ANTIBIOTICS PRESCRIPTION IN NEONATAL INTENSIVE CARE UNIT • G. DimitriouLECT 5. CHORIOAMNIONITIS: FROM CLASSIC DATA TO METABOLOMICS • L. Pugni, C. Fattuoni, C. Pietrasanta, A. Ronchi, A. Noto, L. Barberini, F. Mosca, V. FanosLECT 6. FUNGAL INFECTIONS • A. Giannattasio, L. Capasso, T. Ferrara, S. Salomè, A. Umbaldo, R. Albachiara, F. RaimondiLECT 7. METABOLOMICS IN SEPSIS: THE POWER OF PREDICTION • V. Fanos, R. Pintus, A. Noto, A. DessìLECT 8. PROBIOTICS IN OBSTETRICS and GYNAE­COLOGY • G. Ettore, E. Palma, N. Recine, L. Ferrara, C. EttoreLECT 9. LATE PRETERM INFANTS WITH RESPIRATORY DISTRESS SYNDROME: LIGHTS AND SHADOWS • C. DaniLECT 10. PRECISION VENTILATION IN NEWBORN • P.E. Tagliabue, M.L. Ventura, E. Zannin, R. DellacàLECT 11. PRECISION NON-INVASIVE VENTILATION IN NEWBORNS • C. Moretti, F. Midulla, C.S. Barbara, R. Nenna, L. Di Lucchio, C. GizziLECT 12. BRONCHOPULMONARY DYSPLASIA: FROM NORTHWAY TO METABOLOMICS • D. Manus, V. Masile, M.C. Pintus, A. Dessì, V. FanosLECT 13. RESPIRATORY SYNCYTIAL VIRUS INFECTION: WHAT’S NEW? • M. Lanari, C. BiagiLECT 14. EMERGENCY IN OBSTETRICS, WORLDWIDE • R. Baiocchi, K. Picucci, E. BruniLECT 15. NEONATOLOGY IN AFGHANISTAN • M. TestaLECT 16. NEW PERSPECTIVES IN HUMAN MILK FOR­TIFIERS • E. Bertino, G.E. Moro, P. Tonetto, C. Peila, L. Occhi, E. Spada, G. Ansaldi, S. Deantoni, L. Cavallarin, M. Giribaldi, A. Coscia, A. Dessì, V. FanosLECT 17. GUT PERTURBATION AND PROBIOTICS IN NEONATOLOGY • G. BiasucciLECT 18. NEAR INFRARED SPECTROSCOPY AND GUT FUNCTION

  15. Her Royal Highness Princess Maha Chakri Sirindhorn, The Kingdom of Thailand at SM18 with (from left to right) A. De Roeck, P. Thajchayapong, F. Bordry, E. Tsesmelis and J. Ellis on Tuesday 13th April 2010

    CERN Multimedia

    Maximilien Brice; SM18

    2010-01-01

    Her Royal Highness Princess Maha Chakri Sirindhorn, The Kingdom of Thailand at SM18 with (from left to right) A. De Roeck, P. Thajchayapong, F. Bordry, E. Tsesmelis and J. Ellis on Tuesday 13th April 2010

  16. Low-Cost Methane Liquefaction Plant and Vehicle Refueling Station

    International Nuclear Information System (INIS)

    Wilding, B.; Bramwell, D.

    1999-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is currently negotiating a collaborative effort with Pacific Gas and Electric (PG and E) that will advance the use of liquefied natural gas (LNG) as a vehicle fuel. We plan to develop and demonstrate a small-scale methane liquefaction plant (production of 5,000 to 10,000 gallons per day) and a low-cost ($150,000) LNG refueling station to supply fuel to LNG-powered transit buses and other heavy-duty vehicles. INEEL will perform the research and development work. PG and E will deploy the new facilities commercially in two demonstration projects, one in northern California, and one in southern California

  17. Selected Abstracts of the 13th International Workshop on Neonatology; Cagliari (Italy; October 25th-28th, 2017

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2017-10-01

    Full Text Available Selected Abstracts of the 13th International Workshop on Neonatology • The power of Epigenetics • Twins: identical but different • Cagliari (Italy • October 25th-28th, 2017ABS 1. NEONATAL ACUTE KIDNEY INJURY AND OXI­DATIVE STRESS • A. Babintseva, Y. Hodovanets, L. Agafonova, A. PhrunzaABS 2. LIFE SUPPORT MANAGEMENT IN NEONATES WITH SEVERE OR DISMAL PROGNOSIS: THE OPINIONS OF DOCTORS AND NURSES IN A TERTIARY-LEVEL NEONATAL INTENSIVE CARE UNIT • S. Casarotto, R. Beghini, M. Castellani, E. Bonafiglia, R. Frassoldati, S. Carlassara, F. Carnevale, P. BibanABS 3. THE METABOLOMICS REVOLUTION IN BRON­CHOPULMONARY DYSPLASIA: PERSONAL EX­PERIENCE • A. Buffa, M.C. Pintus, M. Lussu, A. Noto, V. Masile, D. Manus, R. Pintus, A. Dessì, V. Fanos, L. AtzoriABS 4. WHARTON’S JELLY: A SIGNIFICANT DETAIL • P. Bini, A. Castiglione, R. Barachetti, G. Rulfi, G. Natalè, E. Villa, M. BarbariniABS 5. FROM STORK WINGS TO AIRPLANE’S: OUR EXPERIENCE ON 100 NEONATAL TRANSPORTS • F. Ferendeles, C.M. Vacca, D. Frailis, C. Spiga, N. Garau, R. Mazzitti, S. Ibba, A. Cirina, M. Puddu, G. Ottonello, M. Crisafulli, A. AtzeiABS 6. ANOMALIES OF INTRA-HEPATIC BILE DUCT CILIA IN BILIARY ATRESIA • R. Frassetto, F. Parolini, S. Marceddu, G. Satta, T. Pinna, A. Dessanti, V. Villanacci, R. Antonucci, F. Tanda, D. Alberti, K. Schwarz, M.G. ClementeABS 7. HUMAN HERPES VIRUS 6 INFECTION IN CHILDREN WITH LYMPHOBLASTIC ACUTE LEUKEMIA COMMON: CAUSING AGENT OR CASUAL ASSOCIATION? • F. Marino, S. Rossin, S. Abbate, V. Rametta, S. Innaurato, M. Berardi, F. Rimondi, M. Rotella, S. Zanella, C. Santagati, G. Passarella, F. Rigon, C. Lorenzetto, S. RugolottoABS 8. WHOOPING COUGH IN NEWBORN: A CLINICAL CASE DIFFICULT TO SOLVE • M. Vendemmia, G. Parisi, I. Nappa, S. Vendemmia, S. SciorioABS 9. FROZEN SECTIONS EXAMINATION OF PLA­CENTA IN SEPTIC NEWBORNS. THE GENOA EXPERIENCE • M. Paudice, G. Piccardo, A. Allodi, B. Spina, C.M. Biatta, F. Todeschini, F. Buffelli, E

  18. Design study for KALIMER upper internal structure and reactor refueling system

    International Nuclear Information System (INIS)

    Park, Jin Ho

    1996-09-01

    The design study for the KALIMER upper internal structure (UIS) and reactor refueling system has been described. Two distinct features are plug-in UIS and extended refueling outage. For the UIS system, the functional, structural and material requirements have been determined and the accommodation approaches to meet these functional requirements described. For the refueling system, the functional, structural, process and I and C (Instrument and Control) requirements have been established and the accommodation approaches for the functional and process requirements described. The impact on plant availability due to extension of the refueling outage has also been investigated. The accommodation approaches for UIS system show that the design concept of the system will satisfy the functional requirements with a few design issues to be resolved, such as UIS plug in/out handling system and cask design. It is also shown that the functional and process requirements of the refueling system are achievable with the design of the IVTM cask and related transfer system and the extended refueling outage has little effect (within 1%) on the plant availability if extra refueling time do not exceed 1 week. 1 refs. (Author)

  19. A Distance-Adaptive Refueling Recommendation Algorithm for Self-Driving Travel

    Directory of Open Access Journals (Sweden)

    Quanli Xu

    2018-03-01

    Full Text Available Taking the maximum vehicle driving distance, the distances from gas stations, the route length, and the number of refueling gas stations as the decision conditions, recommendation rules and an early refueling service warning mechanism for gas stations along a self-driving travel route were constructed by using the algorithm presented in this research, based on the spatial clustering characteristics of gas stations and the urgency of refueling. Meanwhile, by combining ArcEngine and Matlab capabilities, a scenario simulation system of refueling for self-driving travel was developed by using c#.net in order to validate and test the accuracy and applicability of the algorithm. A total of nine testing schemes with four simulation scenarios were designed and executed using this algorithm, and all of the simulation results were consistent with expectations. The refueling recommendation algorithm proposed in this study can automatically adapt to changes in the route length of self-driving travel, the maximum driving distance of the vehicle, and the distance from gas stations, which could provide variable refueling recommendation strategies according to differing gas station layouts along the route. Therefore, the results of this study could provide a scientific reference for the reasonable planning and timely supply of vehicle refueling during self-driving travel.

  20. Design study for KALIMER upper internal structure and reactor refueling system

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-09-01

    The design study for the KALIMER upper internal structure (UIS) and reactor refueling system has been described. Two distinct features are plug-in UIS and extended refueling outage. For the UIS system, the functional, structural and material requirements have been determined and the accommodation approaches to meet these functional requirements described. For the refueling system, the functional, structural, process and I and C (Instrument and Control) requirements have been established and the accommodation approaches for the functional and process requirements described. The impact on plant availability due to extension of the refueling outage has also been investigated. The accommodation approaches for UIS system show that the design concept of the system will satisfy the functional requirements with a few design issues to be resolved, such as UIS plug in/out handling system and cask design. It is also shown that the functional and process requirements of the refueling system are achievable with the design of the IVTM cask and related transfer system and the extended refueling outage has little effect (within 1%) on the plant availability if extra refueling time do not exceed 1 week. 1 refs. (Author).

  1. Safety approach to the selection of design criteria for the CRBRP reactor refueling system

    International Nuclear Information System (INIS)

    Meisl, C.J.; Berg, G.E.; Sharkey, N.F.

    1979-01-01

    The selection of safety design criteria for Liquid Metal Fast Breeder Reactor (LMFBR) refueling systems required the extrapolation of regulations and guidelines intended for Light Water Reactor refueling systems and was encumbered by the lack of benefit from a commercially licensed predecessor other than Fermi. The overall approach and underlying logic are described for developing safety design criteria for the reactor refueling system (RRS) of the Clinch River Breeder Reactor Plant (CRBRP). The complete selection process used to establish the criteria is presented, from the definition of safety functions to the finalization of safety design criteria in the appropriate documents. The process steps are illustrated by examples

  2. Fuel management study on quarter core refueling for Ling Ao NPP

    International Nuclear Information System (INIS)

    Zhang Hong; Li Jinggang

    2012-01-01

    The fuel management study on quarter core refueling is introduced for Ling Ao NPP. Starting from the selection of the objective of fuel management for quarter core refueling, the code and method used and the analysis carried out are explained in details to reach the final loading pattern chosen. The start-up physics test results are listed to demonstrate the realized quarter core fuel management. In the end, the advantage and disadvantage after turning to quarter core refueling has been given for the power plant from the fuel management point of view. (authors)

  3. Mesoscale convective system surface pressure anomalies responsible for meteotsunamis along the U.S. East Coast on June 13th, 2013.

    Science.gov (United States)

    Wertman, Christina A; Yablonsky, Richard M; Shen, Yang; Merrill, John; Kincaid, Christopher R; Pockalny, Robert A

    2014-11-25

    Two destructive high-frequency sea level oscillation events occurred on June 13th, 2013 along the U.S. East Coast. Seafloor processes can be dismissed as the sources, as no concurrent offshore earthquakes or landslides were detected. Here, we present evidence that these tsunami-like events were generated by atmospheric mesoscale convective systems (MCSs) propagating from inland to offshore. The USArray Transportable Array inland and NOAA tide gauges along the coast recorded the pressure anomalies associated with the MCSs. Once offshore, the pressure anomalies generated shallow water waves, which were amplified by the resonance between the water column and atmospheric forcing. Analysis of the tidal data reveals that these waves reflected off the continental shelf break and reached the coast, where bathymetry and coastal geometry contributed to their hazard potential. This study demonstrates that monitoring MCS pressure anomalies in the interior of the U.S. provides important observations for early warnings of MCS-generated tsunamis.

  4. Traumatic stress symptoms after the November 13th 2015 Terrorist Attacks among Young Adults: The relation to media and emotion regulation.

    Science.gov (United States)

    Monfort, Emmanuel; Afzali, Mohammad Hassan

    2017-05-01

    A major terror attack occurred in the Paris region on 13th November 2015. This event was widely showed, described, and commented in the media. Media consumption may lead to a widespread diffusion of trauma-related symptoms following a collective trauma. These effects may depend on the type of media and emotion regulation strategies used by the media consumer. Trauma history, traumatic symptoms, media consumption, psychological distress, and emotion regulation strategies of 451 young adults were assessed by an online survey. Findings reveal the joint role of social networks use and dysfunctional emotion regulation strategies on anxiety, depression, and somatization symptoms and also on cognitive and emotional alteration among traumatic symptoms. Consistent with the emotional contagion hypothesis, individuals who reported spending more time on social networks were also those who were experiencing more psychological distress. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. “The Invasion and Limits of the Catastrophe of the 13th century” in the Assessments of Contemporary Domestic and Foreign Researchers

    Directory of Open Access Journals (Sweden)

    Narozhnyi E.I.

    2017-12-01

    Full Text Available This review evaluates the works of several authors who published their articles in the journal, Stratum plus (2016, No. 5, which was entirely devoted to the issue of the Mongol-Tatar invasion. Authors from Russia, Ukraine, Belarus, Moldova and Romania assess the nature and extent of the consequences of this invasion on the European continent based on archaeological data, museum exhibits, written sources, church and household architecture. Considering the entire range of opinions expressed as a while, the review evaluates the successful attempt to address the aforementioned topics in a single issue of the journal. Thanks to the success of the attempt, this issue of the journal has become an important collection of articles for assessing the consequences of the relevant events of the 13th century. Without a doubt, this journal’s issue will not only be interesting, but also useful, for a wide range of interested readers.

  6. Current status of the development of the refuelable aluminum-air battery

    Science.gov (United States)

    Cooper, J. F.; Kraftick, K. A.; McKinley, B. J.

    1983-05-01

    The technical status of a refuelable aluminum air battery using flowing caustic aluminate electrolyte at 50 to 700 C is reviewed. Four distinct designs for rapidly refuelable cells were evaluated in single or multicell modules on an engineering scale (167 to 1000 cm(2)/cell). Consideration is given to cells of the wedge configuration, which allow partial recharge, high anode utilization, and rapid refueling. Kinetic models developed for aluminum trihydroxide precipitation are used to predict the behavior of integrated cell/crystallizer systems. Drive cycle life and polarization data are reviewed for air electrodes under simulated vehicle operating conditions. Problems in the development of cost effective anode alloys are described. These results are interpreted from the perspective of the potential of an aluminum air battery to provide an electric vehicle with the range, acceleration and rapid refueling capabilities of common automobiles.

  7. Improvement in or relating to methods and apparatus for refuelling nuclear reactors

    International Nuclear Information System (INIS)

    Shumyakin, E.P.; Sabir-de-Ribas, K.I.; Druzhinsky, I.A.; Kondratiev, P.V.; Andreichikov, B.I.; Slepov, L.M.; Borisjuk, E.V.; Smirnov, A.M.

    1977-01-01

    This invention relates to improvements in the methods and in the apparatus used for refuelling liquid metal cooled fast reactors and in particular to systems for cooling the fuel assemblies as they are removed from the reactor. (UK)

  8. Relative position control design of receiver UAV in flying-boom aerial refueling phase.

    Science.gov (United States)

    An, Shuai; Yuan, Suozhong

    2018-02-01

    This paper proposes the design of the relative position-keeping control of the receiver unmanned aerial vehicle (UAV) with the time-varying mass in the refueling phase utilizing an inner-outer loop structure. Firstly, the model of the receiver in the refueling phase is established. And then tank model is set up to analyze the influence of fuel transfer on the receiver. Subsequently, double power reaching law based sliding mode controller is designed to control receiver translational motion relative to tanker aircraft in the outer loop while active disturbance rejection control technique is applied to the inner loop to stabilize the receiver. In addition, the closed-loop stabilities of the subsystems are established, respectively. Finally, an aerial refueling model under various refueling strategies is utilized. Simulations and comparative analysis demonstrate the effectiveness and robustness of the proposed controllers. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  9. Refueling Infrastructure for Alternative Fuel Vehicles: Lessons Learned for Hydrogen; Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, M. W.; McQueen, S.; Brinch, J.

    2008-07-01

    DOE sponsored the Refueling Infrastructure for Alternative Fuel Vehicles: Lessons Learned for Hydrogen workshop to understand how lessons from past experiences can inform future efforts to commercialize hydrogen vehicles. This report contains the proceedings from the workshop.

  10. Air Force Air Refueling: The KC-X Aircraft Acquisition Program

    National Research Council Canada - National Science Library

    Knight, William; Bolkcom, Christopher

    2008-01-01

    ... to accomplish air refueling missions. The program is expected to cost approximately $35 billion. Both Boeing and a consortium consisting of Northrop Grumman and European Aeronautic Defence and Space Company...

  11. Exposure to regular gasoline and ethanol oxyfuel during refueling in Alaska.

    OpenAIRE

    Backer, L C; Egeland, G M; Ashley, D L; Lawryk, N J; Weisel, C P; White, M C; Bundy, T; Shortt, E; Middaugh, J P

    1997-01-01

    Although most people are thought to receive their highest acute exposures to gasoline while refueling, relatively little is actually known about personal, nonoccupational exposures to gasoline during refueling activities. This study was designed to measure exposures associated with the use of an oxygenated fuel under cold conditions in Fairbanks, Alaska. We compared concentrations of gasoline components in the blood and in the personal breathing zone (PBZ) of people who pumped regular unleade...

  12. Refueling emissions from cars in Japan: Compositions, temperature dependence and effect of vapor liquefied collection system

    Science.gov (United States)

    Yamada, Hiroyuki; Inomata, Satoshi; Tanimoto, Hiroshi

    2015-11-01

    Refueling emissions from cars available on the Japanese market, which were not equipped with specific controlling devices, were investigated. For the composition analysis, a proton transfer reaction plus switchable reagent ion mass spectrometry (PTR + SRI-MS), which is capable of real-time measurement, was used. In addition, the performance of a vapor liquefied collection system (VLCS), which is a recently developed controlling device, was evaluated and compared with an onboard refueling vapor recovery (ORVR) system. The refueling emission factor of uncontrolled vehicles at 20 °C was 1.02 ± 0.40 g/L in the case dispensing 20 L of fuel. The results of composition analysis indicated that the maximum incremental reactivity (MIR) of refueling emissions in Japan was 3.49 ± 0.83. The emissions consist of 80% alkanes and 20% alkenes, and aromatics and di-enes were negligible. C4 alkene had the highest impact on the MIR of refueling emissions. The amounts of refueling emissions were well reproduced by a function developed by MOVE2010 in the temperature range of 5-35 °C. The compositions of the refueling emissions varied in this temperature range, but the change in MIR was negligible. The trapping efficiency of VLCS was the same level as that of the ORVR (over 95%). The MIRs of refueling and evaporative emissions were strongly affected by that of the test fuel. This study and our previous study indicated that MIRbreakthrough ≈ MIRrefueling ≈ MIRfuel + 0.5 and MIRpermeation ≈ MIRfuel. The real-world estimated average MIRfuel in Japan was about 3.0.

  13. Advanced CANDU reactors fuel analysis through optimal fuel management at approach to refuelling equilibrium

    International Nuclear Information System (INIS)

    Tingle, C.P.; Bonin, H.W.

    1999-01-01

    The analysis of alternate CANDU fuels along with natural uranium-based fuel was carried out from the view point of optimal in-core fuel management at approach to refuelling equilibrium. The alternate fuels considered in the present work include thorium containing oxide mixtures (MOX), plutonium-based MOX, and Pressurised Water Reactor (PWR) spent fuel recycled in CANDU reactors (Direct Use of spent PWR fuel in CANDU (DUPIC)); these are compared with the usual natural UO 2 fuel. The focus of the study is on the 'Approach to Refuelling Equilibrium' period which immediately follows the initial commissioning of the reactor. The in-core fuel management problem for this period is treated as an optimization problem in which the objective function is the refuelling frequency to be minimized by adjusting the following decision variables: the channel to be refuelled next, the time of the refuelling and the number of fresh fuel bundles to be inserted in the channel. Several constraints are also included in the optimisation problem which is solved using Perturbation Theory. Both the present 37-rod CANDU fuel bundle and the proposed CANFLEX bundle designs are part of this study. The results include the time to reach refuelling equilibrium from initial start-up of the reactor, the average discharge burnup, the average refuelling frequency and the average channel and bundle powers relative to natural UO 2 . The model was initially tested and the average discharge burnup for natural UO 2 came within 2% of the industry accepted 199 MWh/kgHE. For this type of fuel, the optimization exercise predicted the savings of 43 bundles per full power year. In addition to producing average discharge burnups and other parameters for the advanced fuels investigated, the optimisation model also evidenced some problem areas like high power densities for fuels such as the DUPIC. Perturbation Theory has proven itself to be an accurate and valuable optimization tool in predicting the time between

  14. 13th international symposium on autoradiography (13th ISA '83)

    International Nuclear Information System (INIS)

    Strba, J.

    1983-01-01

    At the conference, 39 papers were heard all of which are included in INIS. Topics covered include: trends in development of solid state track detectors, theory and methods of quantitative autoradiography, equipment for autoradiographs processing and track counting, uses of autoradiography in research of semiconductors, in metallography and in biology

  15. A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

    Science.gov (United States)

    Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

    2014-05-01

    Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm-2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm-3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

  16. A Comparative Study on the Refueling Simulation Method for a CANDU Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Do, Quang Binh; Choi, Hang Bok; Roh, Gyu Hong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2006-07-01

    The Canada deuterium uranium (CANDU) reactor calculation is typically performed by the RFSP code to obtain the power distribution upon a refueling. In order to assess the equilibrium behavior of the CANDU reactor, a few methods were suggested for a selection of the refueling channel. For example, an automatic refueling channel selection method (AUTOREFUEL) and a deterministic method (GENOVA) were developed, which were based on a reactor's operation experience and the generalized perturbation theory, respectively. Both programs were designed to keep the zone controller unit (ZCU) water level within a reasonable range during a continuous refueling simulation. However, a global optimization of the refueling simulation, that includes constraints on the discharge burn-up, maximum channel power (MCP), maximum bundle power (MBP), channel power peaking factor (CPPF) and the ZCU water level, was not achieved. In this study, an evolutionary algorithm, which is indeed a hybrid method based on the genetic algorithm, the elitism strategy and the heuristic rules for a multi-cycle and multi-objective optimization of the refueling simulation has been developed for the CANDU reactor. This paper presents the optimization model of the genetic algorithm and compares the results with those obtained by other simulation methods.

  17. Laser driven pellet refuelling for JET (and reactor) uses

    International Nuclear Information System (INIS)

    Spalding, I.J.

    1978-11-01

    Published estimates of pellet sizes and velocities required to refuel JET and post-JET experiments are summarized. Possible advantages and difficulties of accelerating solid, unconstrained hydrogenic (and also jacketed) pellets to these velocities using laser techniques are then discussed. An essential problem to be solved is adequate axial guidance of the pellet during its acceleration, since laser pulse durations of many sound-transit times (in the solid D 2 ) are necessary to avoid shock-heating the pellet. It is shown that Culham's multikilojoule CO 2 TROJAN laser facility is well suited to testing many of the concepts proposed. In particular it is shown that successful verification, and subsequent optimization, of such (novel) techniques would permit single shot tests of contemporary pellet ablation theories by the injection of approximately 1 mm diameter D 2 pellets at velocities 6 cm s -1 into the JET plasma. Means for scaling these techniques to repetition rates of order 10 Hz, and to the 1 cm pellet diameters possibly required in a working Tokamak reactor, are also discussed. (author)

  18. Refueling the RPI reactor facility with low-enrichment fuel

    International Nuclear Information System (INIS)

    Harris, D.R.; Rodriguez-Vera, F.; Wicks, F.E.

    1985-01-01

    The RPI Critical Facility has operated since 1963 with a core of thin, highly enriched fuel plates in twenty-five fuel assembly boxes. A program is underway to refuel the reactor with 4.81 w/o enriched SPERT (F-1) fuel rods. Use of these fuel rods will upgrade the capabilities of the reactor and will eliminate a security risk. Adequate quantities of SPERT (F-1) fuel rods are available, and their use will result in a great cost saving relative to manufacturing new low-enrichment fuel plates. The SPERT fuel rods are 19 inches longer than are the present fuel plates, so a modified core support structure is required. It is planned to support and position the SPERT fuel pins by upper and lower lattice plates, thus avoiding the considerable cost of new fuel assembly boxes. The lattice plates will be secured to the existing top and bottom plates. The design permits the fabrication and use of other lattice plates for critical experiment research programs in support of long-lived full development for power reactors. (author)

  19. Ecclesiastical architecture in Álava and Treviño during the 12th and 13th centuries: promoters, builders and meanings in a transitional moment

    Directory of Open Access Journals (Sweden)

    Egoitz Alfaro Suescun

    2017-12-01

    Full Text Available This paper presents a reflection on church building in Álava and Treviño regions (north-central Spain during the 12th and 13th centuries. The study aims at tracking the transformations occurred in the promoters’ idiosyncrasy, the builders’ organizational model and both the function and meaning of these temples. More than a hundred cases have been analyzed to this end, so as to determine the variables involving their construction. Three main phases have been established according to changes documented in stonemasonry: period 1 (1100-1250, period 2 (1220-1250 and period 3 (1220-1300. The combined assessment of both the aforementioned variables and phases shows the existence of two major shifts in the ecclesiastical architecture of these centuries with regard to the previous period, constituting the 12th century itself kind of a transitional stage. These changes are seen in both the demand –economically, temporally and structurally more feasible buildings– and the supply – increasingly homogeneous temples–

  20. A glimpse into the early origins of medieval anatomy through the oldest conserved human dissection (Western Europe, 13(th) c. A.D.).

    Science.gov (United States)

    Charlier, Philippe; Huynh-Charlier, Isabelle; Poupon, Joël; Lancelot, Eloïse; Campos, Paula F; Favier, Dominique; Jeannel, Gaël-François; Bonati, Maurizio Rippa; de la Grandmaison, Geoffroy Lorin; Hervé, Christian

    2014-05-12

    Medieval autopsy practice is very poorly known in Western Europe, due to a lack of both descriptive medico-surgical texts and conserved dissected human remains. This period is currently considered the dark ages according to a common belief of systematic opposition of Christian religious authorities to the opening of human cadavers. The identification in a private collection of an autopsied human individual dated from the 13(th) century A.D. is an opportunity for better knowledge of such practice in this chrono-cultural context, i.e. the early origins of occidental dissections. A complete forensic anthropological procedure was carried out, completed by radiological and elemental analyses. The complete procedure of this body opening and internal organs exploration is explained, and compared with historical data about forensic and anatomical autopsies from this period. During the analysis, a red substance filling all arterial cavities, made of mercury sulfide (cinnabar) mixed with vegetal oil (oleic and palmitic acids) was identified; it was presumably used to highlight vascularization by coloring in red such vessels, and help in the preservation of the body. Of particular interest for the description of early medical and anatomical knowledge, this "human preparation" is the oldest known yet, and is particularly important for the fields of history of medicine, surgery and anatomical practice.

  1. The 13 th world congress on medical and health informatics, Cape Town, South Africa: Partnerships for effective e-Health solutions

    Directory of Open Access Journals (Sweden)

    Andrew Georgiou

    2011-01-01

    Full Text Available The 13 th World Congress on Medical and Health Informatics (Medinfo was held in 2010 between 12 and 15 September in Cape Town, South Africa. This triennial international gathering is the official conference of the International Medical Informatics Association (IMIA and brings together leading health informatics leaders, scientists, clinicians, researchers, vendors, developers and government and health care planners from around the globe. The conference attracted 905 submissions and resulted in a program that included 260 oral presentations, 349 posters presentations and 21 scientific demonstrations representing contributions from 58 countries. The Medinfo program covered all aspects of health informatics from traditional areas, such as hospital information systems, patient registries, nursing informatics, data integration, standards, interoperability issues and decision support, to innovative topics, such as translational bioinformatics, text mining, intelligent data analysis, emerging technologies, quality, social networking, workflow and organizational issues. The outgoing President of the IMIA, Professor Reinhold Haux, presented on health informatics challenges into the future, reinforcing that today and in the future, health care has to be considered as part of a continuous and coordinated life-time journey and not just as episodes of disease. Medical informatics has a key role to play in this paradigm shift. The new IMIA President, Professor Antoine Geissbuhler, was announced at the closing ceremony. The next Medinfo congress will take place in Copenhagen, Denmark, in September 2013.

  2. Signal transduction, receptors, mediators and genes: younger than ever - the 13th meeting of the Signal Transduction Society focused on aging and immunology

    Directory of Open Access Journals (Sweden)

    Klotz Lars-Oliver

    2010-02-01

    Full Text Available Abstract The 13th meeting of the Signal Transduction Society was held in Weimar, from October 28 to 30, 2009. Special focus of the 2009 conference was "Aging and Senescence", which was co-organized by the SFB 728 "Environmentally-Induced Aging Processes" of the University of Düsseldorf and the study group 'Signal Transduction' of the German Society for Cell Biology (DGZ. In addition, several other areas of signal transduction research were covered and supported by different consortia associated with the Signal Transduction Society including the long-term associated study groups of the German Society for Immunology and the Society for Biochemistry and Molecular Biology, and for instance the SFB/Transregio 52 "Transcriptional Programming of Individual T Cell Subsets" located in Würzburg, Mainz and Berlin. The different research areas that were introduced by outstanding keynote speakers attracted more than 250 scientists, showing the timeliness and relevance of the interdisciplinary concept and exchange of knowledge during the three days of the scientific program. This report gives an overview of the presentations of the conference.

  3. Papers read at the 13th symposium on neuroradiological contrast media, April 3-5, 1992, Fulda; Vortraege des 13. Neuroradiologischen Kontrastmittelsymposiums, 3.-5. April 1992 Fulda

    Energy Technology Data Exchange (ETDEWEB)

    Nadjmi, M [ed.; Hacker, H [ed.; Sartor, K [ed.; Voigt, K [ed.

    1993-05-01

    In recent years, NMR imaging has become a most important tool for the diagnosis of central nervous disorders in children. Using this non-invasive method, which also obviates the need for ionizing rays, it was possible to gain entirely new insights into certain types of neuropaediatric diseases. The particular role of NMR imaging in the assessment of such changes hence was the topic discussed at the 13th Symposium of Neuroradiological Contrast Media. The special journal offers a choice of the papers read on that occasion, among them contributions on methods of anaesthesia used in NMR imaging, on gadolinium DTPA, the physiological development of the infantile brain, congenital malformations and disorders, neurodegenerative and inflammatory diseases, malformations developing during childhood as well as on the limitations that NMR imaging was found to have in the fields of neuropaediatrics and neuropathology. (orig./VHE) [Deutsch] Die Kernspintomographie hat in den letzten Jahren eine wesentliche Bedeutung fuer die Diagnostik von Erkrankungen des Zentralnervensystems im Kindesalter erlangt. Mit Hilfe dieser nicht invasiven und ohne ionisierende Strahlung arbeitenden Methode konnten voellig neue Erkenntnisse ueber bestimmte neuropaediatrische Krankheitsbilder gewonnen werden. Die Kernspintomographie neuropaediatrischer Erkrankungen war daher Gegenstand des 13. Neuroradiologischen Kontrastmittelsymposiums. Im vorliegenden Heft wird eine Auswahl der zu diesem Thema gehaltenen Vortraege veroeffentlicht, die sich u.a. mit Anaesthesie bei kernspintomographischen Untersuchungen, Gadolinium-DTPA, der normalen Reifung des kindlichen Gehirns, angeborenen Missbildungen und Krankheiten, neurodegenerativen und entzuendlichen Erkrankungen und Missbildungen im Kindesalter sowie den Grenzen der Kernspintomographie in der Neuropaediatrie und -pathologie beschaeftigen. (orig./VHE)

  4. A simplified burnup calculation strategy with refueling in static molten salt reactor

    International Nuclear Information System (INIS)

    Srivastava, A.K.; Gupta, Anurag; Krishnani, P.D.

    2015-01-01

    Molten Salt Reactors, by nature can be refuelled and reprocessed online. Thus, a simulation methodology has to be developed which can consider online refueling and reprocessing aspect of the reactor. To cater such needs a simplified burnup calculation strategy to account for refueling and removal of molten salt fuel at any desired burnup has been identified in static molten salt reactor in batch mode as a first step of way forward. The features of in-house code ITRAN has been explored for such calculations. The code also enables us to estimate the reactivity introduced in the system due to removal of any number of considered nuclides at any burnup. The effect of refueling fresh fuel and removal of burned fuel has been studied in batch mode with in-house code ITRAN. The effect of refueling and burnup on change in reactivity per day has been analyzed. The analysis of removal of 233 Pa at a particular burnup has been carried out. The similar analysis has been performed for some other nuclides also. (author)

  5. Anti-disturbance rapid vibration suppression of the flexible aerial refueling hose

    Science.gov (United States)

    Su, Zikang; Wang, Honglun; Li, Na

    2018-05-01

    As an extremely dangerous phenomenon in autonomous aerial refueling (AAR), the flexible refueling hose vibration caused by the receiver aircraft's excessive closure speed should be suppressed once it appears. This paper proposed a permanent magnet synchronous motor (PMSM) based refueling hose servo take-up system for the vibration suppression of the flexible refueling hose. A rapid back-stepping based anti-disturbance nonsingular fast terminal sliding mode (NFTSM) control scheme with a specially established finite-time convergence NFTSM observer is proposed for the PMSM based hose servo take-up system under uncertainties and disturbances. The unmeasured load torque and other disturbances in the PMSM system are reconstituted by the NFTSM observer and to be compensated during the controller design. Then, with the back-stepping technique, a rapid anti-disturbance NFTSM controller is proposed for the PMSM angular tracking to improve the tracking error convergence speed and tracking precision. The proposed vibration suppression scheme is then applied to PMSM based hose servo take-up system for the refueling hose vibration suppression in AAR. Simulation results show the proposed scheme can suppress the hose vibration rapidly and accurately even the system is exposed to strong uncertainties and probe position disturbances, it is more competitive in tracking accuracy, tracking error convergence speed and robustness.

  6. Extension of the time-average model to Candu refueling schemes involving reshuffling

    International Nuclear Information System (INIS)

    Rouben, Benjamin; Nichita, Eleodor

    2008-01-01

    Candu reactors consist of a horizontal non-pressurized heavy-water-filled vessel penetrated axially by fuel channels, each containing twelve 50-cm-long fuel bundles cooled by pressurized heavy water. Candu reactors are refueled on-line and, as a consequence, the core flux and power distributions change continuously. For design purposes, a 'time-average' model was developed in the 1970's to calculate the average over time of the flux and power distribution and to study the effects of different refueling schemes. The original time-average model only allows treatment of simple push-through refueling schemes whereby fresh fuel is inserted at one end of the channel and irradiated fuel is removed from the other end. With the advent of advanced fuel cycles and new Candu designs, novel refueling schemes may be considered, such as reshuffling discharged fuel from some channels into other channels, to achieve better overall discharge burnup. Such reshuffling schemes cannot be handled by the original time-average model. This paper presents an extension of the time-average model to allow for the treatment of refueling schemes with reshuffling. Equations for the extended model are presented, together with sample results for a simple demonstration case. (authors)

  7. The development of AI-based refueling control system to the FUGEN NPP

    International Nuclear Information System (INIS)

    Nanko, Takashi; Tanaka, Koichi.

    1996-01-01

    Since even skilled workers spent a considerable time to perform the refueling work previously, an automatic control system was developed by using φNET, an AI tool and its application to refueling works was started in practice. In this system, the optimum plan for the refueling work was constructed using a network which allows to present the equipments to handle the fuel, as well as the operational roles obtained from the worker's experiences. Based on the plan, the instruments concerned were automatically operated to collect the data on the actual operation, the expression and/or printing was made on the movement histories of the articles and the status of their storages. By the development of the system, optimization of refueling works, rationalization of the management and the improvement of reliability for the works became possible. The development was performed in the following two steps; the first was development of an off-line system providing an operational guidance ot the operator according to the optimum operation plan and the second was development of an on-line system which allows to automatically control the instruments according to the operational plan. The off-line system has been put into practice since 1991 and the automatic operation of refueling has been started with the on-line system from 1995. (M.N.)

  8. Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013) Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013)

    Science.gov (United States)

    Lin, Z.

    2014-10-01

    In magnetic fusion plasmas, a significant fraction of the kinetic pressure is contributed by superthermal charged particles produced by auxiliary heating (fast ions and electrons) and fusion reactions (a-particles). Since these energetic particles are often far away from thermal equilibrium due to their non-Maxwellian distribution and steep pressure gradients, the free energy can excite electromagnetic instabilities to intensity levels well above the thermal fluctuations. The resultant electromagnetic turbulence could induce large transport of energetic particles, which could reduce heating efficiency, degrade overall plasma confinement, and damage fusion devices. Therefore, understanding and predicting energetic particle confinement properties are critical to the success of burning plasma experiments such as ITER since the ignition relies on plasma self-heating by a-particles. To promote international exchanges and collaborations on energetic particle physics, the biannual conference series under the auspices of the International Atomic Energy Agency (IAEA) were help in Kyiv (1989), Aspenas (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007), Kyiv (2009), and Austin (2011). The papers in this special section were presented at the most recent meeting, the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was hosted by the Fusion Simulation Center, Peking University, Beijing, China (17-20 September 2013). The program of the meeting consisted of 71 presentations, including 13 invited talks, 26 oral contributed talks, 30 posters, and 2 summary talks, which were selected by the International Advisory Committee (IAC). The IAC members include H. Berk, L.G. Eriksson, A. Fasoli, W. Heidbrink, Ya. Kolesnichenko, Ph. Lauber, Z. Lin, R. Nazikian, S. Pinches, S. Sharapov, K. Shinohara, K. Toi, G. Vlad, and X.T. Ding. The conference program

  9. Experiences with the upgraded SKP system during refuelling Paks nuclear power plant

    International Nuclear Information System (INIS)

    Baranyai, A.; Hetzmann, A.

    1997-01-01

    In order to control the neutron flux during the refueling period, new measuring chains were developed and put into operation by the experts of KFKI-RegTron Co., Ltd. and the Paks Nuclear Power Plant with the purpose of partially substituting the original Refuelling Neutron Monitoring system (SKP) of WWER-440 reactor units. The modified monitoring system processes the signals of detectors located in channels outside the core. The outputs of measurement amplifiers equipped with up-to-date electronics fit in the original system perfectly. Use of the out-of-core measuring technique confirmed the preliminary expectations: interference sensitivity has decreased, the neutron/gamma ration increased and refueling time has become shorter by one to one-and-a-half day. The paper details the reasons for upgrading, the essence of utilized solutions and the operational experience. (author)

  10. Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA) (13th, Mannheim, Germany, October 28-30, 2016)

    Science.gov (United States)

    Sampson, Demetrios G., Ed.; Spector, J. Michael, Ed.; Ifenthaler, Dirk, Ed.; Isaias, Pedro, Ed.

    2016-01-01

    These proceedings contain the papers of the 13th International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA 2016), October 28-30, 2016, which has been organized by the International Association for Development of the Information Society (IADIS), co-organized by the University of Mannheim, Germany, and endorsed by the…

  11. The valuation key day in legal expropriation according to the Atomic Energy Act. On the transferability of the legal compensation fundamentals of the so called progression legislation on the 13th AtG amendment

    International Nuclear Information System (INIS)

    Cornils, Matthias

    2015-01-01

    Under the - constitutionally based - regime ruling compensation for expropriated property notably the valuation key day is of crucial importance for the level of compensation. The study examines the therefor acknowledged principles and criteria, their constitutional foundation, their applicability on expropriation measures directly performed by an Act of Parliament, finally their transferability to the 13th amendment to the Atomic Energy Act.

  12. Report of the Two-Day National Seminar on New Directions in Higher Education, Organized by the Kerala State Higher Education Council on 12th and 13th July 2010

    Science.gov (United States)

    Praveen, C.

    2010-01-01

    This is a report of the Two-Day National Seminar on New Directions in Higher Education, organized by the Kerala State Higher Education Council on 12th and 13th July 2010. The objective of the seminar was to deliberate upon the reforms being undertaken by the Government of India in Higher Education. Reputed scholars from within and outside the…

  13. Formal methods for dynamical systems : 13th International School on Formal Methods for the Design of Computer, Communication, and Software Systems, SFM 2013, Bertinoro, Italy, June 17-22, 2013 : advanced lectures

    NARCIS (Netherlands)

    Bernardo, M.; Vink, de E.P.; Di Pierro, A.; Wiklicky, H.

    2013-01-01

    Preface. This volume presents a set of papers accompanying the lectures of the 13th International School on Formal Methods for the Design of Computer, Communication, and Software Systems (SFM). This series of schools addresses the use of formal methods in computer science as a prominent approach to

  14. Early Old Bulgarian Layer in the Office Menaion of Rostov Provenance of the 13th c. (RNL, F.p.I 37

    Directory of Open Access Journals (Sweden)

    Роман Николаевич Кривко

    2012-08-01

    Full Text Available The article is dedicated to the linguistic and textual peculiarities of the Festal Menaion F. p. I 37 preserved in Russian National Library (S.-Petersburg and dated to the beginning of the 13th c. Numerous linguistic features of the manuscript testify to Old West Bulgarian (Old Macedonian literary usage of the end of the 9th — beginning of the 10th c., on the basis of which the earliest Slavonic hymnographical translations were performed. Despite of such an archaic linguistic and textual layers observed in the manuscript, its calendar, structure and content were influenced by the monastic rite based on the Typicon of Patriarch Alexius the Studite which had been translated and introduced in Kievan Rus' at the second half of the 11th c. The linguistic features of the text version as attested by F. p. I 37 have been compared to the manuscripts testifying to the Alexius the Studite text version. It has been affirmed that adaptation of the Old Bulgarian hymnographic heritage in Kievan Rus' followed the unstable trend to neglect the most remarkable South (and South West Slavonic lingustic features and aimed at establishing “neutral” over dialectal Church Slavonic literary usage. The significant part of the article contains the edition of the earliest Slavonic, i.e., Old Bulgarian, translation of the Greek kanon Τάφῳ παρθενοδόχῳ dedicated to the Dormition of the Theotokos. The earliest Slavonic translation of this kanon has been preserved in the unique available manuscript, that is F. p. I 37. The publication of the Slavonic translation is supplied with the first critical edition of the Greek source performed on the basis of twelve manuscripts, the linguistic commentary of the Slavonic text, and remarks concerning some metric peculiarities of the original Greek version.

  15. NCSE's 13th National Conference on Disasters and Environment: Science, Preparedness and Resilience, Post Conference Follow-up Activities and Dissemination

    Energy Technology Data Exchange (ETDEWEB)

    Saundry, Peter [National Council for Science and the Environment, Washington, DC (United States); Johns Hopkins Univ., Baltimore, MD (United States); Kossak, Shelley [National Council for Science and the Environment, Washington, DC (United States)

    2014-04-29

    The National Council for Science and the Environment (NCSE) received $15,000 from the US Department of Energy to support post-conference activities of the 13th National Conference on the theme of Disasters and the Environment: Science, Preparedness and Resilience, held on January 15-17, 2013 at the Ronald Reagan Building and International Trade Center in Washington, DC. Over 1,000 participants from the scientific, emergency response, policy, conservation, and business communities, as well as federal and local government officials, and international entities attended the event. The conference developed actionable outcomes that constructively advance the science behind decision-making on environmental disasters, with an intended result of more prepared and resilient communities in light of a changing climate. Disasters and Environment topic was addressed through six organizing themes: Cascading Disasters; Intersection of the Built and Natural Environments; Disasters as Mechanisms of Ecosystem Change; Rethinking Recovery and Expanding the Vision of Mitigation; Human Behavior and its Consequences; and "No Regrets" Resilience. The program featured eight plenary sessions, 24 symposia and 23 breakout workshops and addressed pivotal issues surrounding disasters and environment including lifeline services, the energy, climate, hazard nexus, grid collapse, community vulnerability, and natural resource management. Sessions, symposia and workshops were conducted by over 200 distinguished thought leaders, scientists, government officials, policy experts and international speakers throughout the three day event. Following the conference, NCSE prepared a set of recommendations and results from the workshops and disseminated the results to universities, organizations and agencies, the business community. NCSE’s national dissemination involved organized several targeted trips and meetings to disseminate significant findings to key stakeholder groups.

  16. Integrated services as the key to the optimisation of refueling outages

    International Nuclear Information System (INIS)

    Ortega, Juan; Gonzalez, Roberto; Gutierrez, Jose E.

    2010-01-01

    Refueling outages at nuclear power plants are subject to demanding improvement criteria in each and every one of the activities scheduled. The management of activities on the refueling floor, including the phases of opening and closing of the reactor vessel and associated tasks relating to the reactor internals, the unloading, loading and management of the irradiated fuel and activities requested for the in-service inspection of essential primary circuit components, are interventions that have an impact on the refueling critical path and whose overall integration allows for significant optimization of the entire management of this fundamental refueling activity. For several years now, ENUSA, as the company specializing in irradiated fuel services, TECNATOM as the company responsible for the in-service inspection of critical primary side components and Westinghouse as the technology provider and specialist in the supply of plant support services, have together formed a solid working team offering this integrated refueling service to the Spanish plants. Today, the new and heightened demands regarding the training and specialization of the personnel participating in refueling outages, the need to consider contingencies in the activities scheduled and the objectives relating to the ALARA concept and safe operations require that this service include new activities providing synergies and leading to higher levels of commitment to excellence. This paper will present the service model developed, the most significant activities integrated in the service and the advantages and milestones achieved and reached during this period, compared to the conventional distributed functions model. Likewise, an analysis will be made of the new challenges that are being addressed, with a view to bringing about a more global integration. (authors)

  17. Computer simulation for risk management: Hydrogen refueling stations and water supply of a large region

    DEFF Research Database (Denmark)

    Markert, Frank; Kozine, Igor

    2012-01-01

    in applying DES models to the analysis of large infrastructures for refueling stations and water supply. Two case studies are described which are concerned with the inherently safer supply and storage of hydrogen at refueling stations and an established drinking water supply system of a large metropolitan...... area, respectively. For both, the simulation aims at identifying points of potential improvement from the reliability point of view. This allows setting up a list of activities and safety measures to reduce risk and possible losses and mitigate the consequences of accidents. Based on the cases...

  18. [CFD numerical simulation onto the gas-liquid two-phase flow behavior during vehicle refueling process].

    Science.gov (United States)

    Chen, Jia-Qing; Zhang, Nan; Wang, Jin-Hui; Zhu, Ling; Shang, Chao

    2011-12-01

    With the gradual improvement of environmental regulations, more and more attentions are attracted to the vapor emissions during the process of vehicle refueling. Research onto the vehicle refueling process by means of numerical simulation has been executed abroad since 1990s, while as it has never been involved so far domestically. Through reasonable simplification about the physical system of "Nozzle + filler pipe + gasoline storage tank + vent pipe" for vehicle refueling, and by means of volume of fluid (VOF) model for gas-liquid two-phase flow and Re-Normalization Group kappa-epsilon turbulence flow model provided in commercial computational fluid dynamics (CFD) software Fluent, this paper determined the proper mesh discretization scheme and applied the proper boundary conditions based on the Gambit software, then established the reasonable numerical simulation model for the gas-liquid two-phase flow during the refueling process. Through discussing the influence of refueling velocity on the static pressure of vent space in gasoline tank, the back-flowing phenomenon has been revealed in this paper. It has been demonstrated that, the more the flow rate and the refueling velocity of refueling nozzle is, the higher the gross static pressure in the vent space of gasoline tank. In the meanwhile, the variation of static pressure in the vent space of gasoline tank can be categorized into three obvious stages. When the refueling flow rate becomes higher, the back-flowing phenomenon of liquid gasoline can sometimes be induced in the head section of filler pipe, thus making the gasoline nozzle pre-shut-off. Totally speaking, the theoretical work accomplished in this paper laid some solid foundation for self-researching and self-developing the technology and apparatus for the vehicle refueling and refueling emissions control domestically.

  19. Image of the Golden Horde Tatar-Mongols and Ilkhans in the Writings of Crusade Propagandists (late 13th – early 14th centuries »

    Directory of Open Access Journals (Sweden)

    Alexandar Nikolov

    2015-09-01

    Full Text Available By the end of the 13th century, when the Tatar-Mongols were already well-known in Latin Europe, several experts in the Near East affairs tried to specify the real place of the Tatars of the Golden Horde and the Ilkhan Horde in the complicated geopolitical complex, related to the struggle for the liberation of the Holy Land and the Holy Sepulchre from the “yoke of the Saracens”. The experts had to explain to the Western European elites how they should perceive the two Western uluses of the formerly united Mongol Empire of the Chinggisids. The relations with the Golden Horde and the Ilkhans of Iran appeared to be of crucial importance for the liberation and preservation of the Holy Land. Thus, two images of the Tatars took shape gradually: that of potential enemies in the case of the Golden Horde, and the possible allies in the case of the Ilkhans. This text is dedicated to several treatises of these propagandists, unified under the title and the slogan De Recuperatione Terrae Sanctae. The main focus is on the treatises of Hayton of Corycus (“Flower of the Histories of the Orient” and of Marino Sanudo Torsello (“The Secrets of the Faithful to the Cross”, where we could find extremely interesting information on the Western European image of the Tatars. Several other excerpts are included in the text, namely passages from the treatises of William Adam (“How to exterminate the Saracens”, Pseudo-Brocardus (“A Guideline of Organization of a Crusade” and the founder of this genre – Fidenzio di Padova (“A Book for the Recovery of the Holy Land”, where the political and military tendencies are defined very clear. The evolution of the image of the Tatar-Mongols developed from “children of the Tartar” to “bonnes sauvages” and “global rulers”, that are able to handle even the holy cause of the liberation of the Promised Land of the Christian people.

  20. Comparison of Lamiaceae medicinal uses in eastern Morocco and eastern Andalusia and in Ibn al-Baytar's Compendium of Simple Medicaments (13th century CE).

    Science.gov (United States)

    El-Gharbaoui, Asmae; Benítez, Guillermo; González-Tejero, M Reyes; Molero-Mesa, Joaquín; Merzouki, Abderrahmane

    2017-04-18

    Transmission of traditional knowledge over time and across culturally and historically related territories is an important topic in ethnopharmacology. Here, we contribute to this knowledge by analysing data on medicinal uses in two neighbouring areas of the Western Mediterranean in relation to a historical text that has been scarcely mentioned in historical studies despite its interest. This paper discusses the sharing of popular knowledge on the medicinal uses of plants between eastern Morocco and eastern Andalusia (Spain), focusing on one of the most useful plant families in the Mediterranean area: Lamiaceae. Moreover, we used the classical work of Ibn al-Baytar (13th century CE) The Compendium of Simple Medicaments and Foods as a basis to contrast the possible link of this information, analysing the influence of this historical text on current popular tradition of medicinal plant use in both territories. For data collection, we performed ethnobotanical field research in the eastern part of Morocco, recording current medicinal uses for the Lamiaceae. In addition, we systematically reviewed the ethnobotanical literature from eastern Andalusia, developing a database. We investigated the possible historical link of the shared uses and included in this database the information from Ibn al-Baytar's Compendium. To compare the similarity and diversity of the data, we used Jaccard's similarity index. Our field work provided ethnobotanical information for 14 Lamiaceae species with 95 medicinal uses, serving to treat 13 different pathological groups. Of the total uses recorded in Morocco, 30.5% were shared by eastern Andalusia and found in Ibn al-Baytar's work. There was a higher similarity when comparing current uses of the geographically close territories of eastern Morocco and eastern Andalucía (64%) than for eastern Morocco and this historical text (43%). On the other hand, coincidences between current uses in eastern Andalusia and the ones related in the Compendium

  1. Enabling fast charging - Vehicle considerations

    Science.gov (United States)

    Meintz, Andrew; Zhang, Jiucai; Vijayagopal, Ram; Kreutzer, Cory; Ahmed, Shabbir; Bloom, Ira; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Dufek, Eric J.; Francfort, James; Hardy, Keith; Jansen, Andrew N.; Keyser, Matthew; Markel, Anthony; Michelbacher, Christopher; Mohanpurkar, Manish; Pesaran, Ahmad; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Tanim, Tanvir

    2017-11-01

    To achieve a successful increase in the plug-in battery electric vehicle (BEV) market, it is anticipated that a significant improvement in battery performance is required to increase the range that BEVs can travel and the rate at which they can be recharged. While the range that BEVs can travel on a single recharge is improving, the recharge rate is still much slower than the refueling rate of conventional internal combustion engine vehicles. To achieve comparable recharge times, we explore the vehicle considerations of charge rates of at least 400 kW. Faster recharge is expected to significantly mitigate the perceived deficiencies for long-distance transportation, to provide alternative charging in densely populated areas where overnight charging at home may not be possible, and to reduce range anxiety for travel within a city when unplanned charging may be required. This substantial increase in charging rate is expected to create technical issues in the design of the battery system and the vehicle's electrical architecture that must be resolved. This work focuses on vehicle system design and total recharge time to meet the goals of implementing improved charge rates and the impacts of these expected increases on system voltage and vehicle components.

  2. Analysis on engineering application of CNP1000 in-containment refueling water storage tank

    International Nuclear Information System (INIS)

    Wang Bin; Wang Yong; Qiu Jian; Weng Minghui

    2005-01-01

    Based on the basic design of CNP1000 (three loops), which is self-reliance designed by China National Nuclear Cooperation, and investigation results from abroad advanced nuclear power plant design of In-containment Refueling Water Storage tank, this paper describe the system flowsheet, functional requirements, structural design and piping arrangement about In-containment Refueling Water Storage Tank. The design takes the lower structural space as the IRWST. Four areas are configured to meet the diverse functional requirements, including depressurization area, water collection area, safety injection and/or containment spray suction area, TSP storage area / reactor cavity flooding holdup tank. Also the paper depict the corresponding analysis and demonstration, such as In-containment Refueling Water Storage Tank pressure transient on depressurization area of IRWST, suction and internal flow stream of IRWST, configuration of strains, the addition method and amount of chemical addition, design and engineering applicant of Reactor Cavity Flooding System. All the analysis results show the basic design of IRWST meeting with the Utility Requirement Document's requirements on performance of safety function, setting of overfill passage, overpressure protection, related interference, etc., and show the reliability of Engineering Safety Features being improved for CNP1000 (three loops). Meanwhile, it is demonstrated that the design of In-containment Refueling Water Storage Tank can apply on the future nuclear power plant project in China. (authors)

  3. Strength analysis of refueling machine for large PWR in nuclear power plant

    International Nuclear Information System (INIS)

    Jia Xiaofeng; Zhou Guofeng; Bi Xiangjun; Ji Shunying

    2010-01-01

    The refueling machine of PWR plays important roles in nuclear power plant operation,and the dynamic analysis and strength assessment should be carried out to check its safety. In this paper, the finite element model (FEM) was established with the software ANSYS 12 for the refueling machine structure of large 1 000 MW PWR. The dynamic computations were performed under three work conditions, i.e. normal (cart starting and braking), abnormal (OBE) and accident(SSE) conditions, respectively. The structure responses (internal force and stress) of refueling machine under earthquake response spectrum in three directions were combined with the method of square root of square sum (SRSS). Moreover, the static response under gravity was also considered to construct the most critical conditions. With the simulated results, the strength of main structure, bold and weld joint,and the stability of landing leg for additional crane were assessed based on the RCCM code. At last, the local stress analysis of finger-form hook, which function is to take fuel assemblies, was also analyzed, while its strength was also assessed. The results show that the strengths of the refueling machine under various working conditions can meet the safety requirements. (authors)

  4. 14 CFR 29.979 - Pressure refueling and fueling provisions below fuel level.

    Science.gov (United States)

    2010-01-01

    ..., DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.979 Pressure refueling and fueling provisions below fuel level. (a) Each fueling connection... from that tank in case of malfunction of the fuel entry valve. (b) For systems intended for pressure...

  5. Support services to refuelling exploitation; Servicios de apoyo a explotacion en recarga

    Energy Technology Data Exchange (ETDEWEB)

    Castineira, M; Cortes, M.; Rayo, A.

    2010-07-01

    The refuelling period in nuclear power stations is very important due to the need to optimise its duration, large volumes of work and resources that have to be planned and coordinated and their impact on the subsequent operating cycle. Empresarios Agrupados has a permanent organisation, with specialised resources and extensive availability of human resources. (Author)

  6. Report on the Fourth Reactor Refueling. Laguna Verde Nuclear Central. Unit 1. April-May 1995

    International Nuclear Information System (INIS)

    Mendoza L, A.; Flores C, E.; Lopez G, C.P.F.

    1995-01-01

    The fourth refueling of the Unit 1 of Laguna Verde Nuclear Central was executed in the period of April 17 to May 31 of 1995 with the participation of a task group of 358 persons, included technicians and radiation protection officials and auxiliaries.The radiation monitoring and radiological surveillance to the workers was present length ways the refueling process and always attached to the ALARA criteria. The check points for radiation levels were set at: primary container or dry well, reloading floor, decontamination room (level 10.5), turbine building and radioactive waste building. To take advantage of the refueling process, rooms 203 and 213 of the turbine buildings were subject to inspection and maintenance work in valves, heaters and drains of heaters. Management aspects as personnel selection and training, costs, and countable are also presented in this report. Owing to the high cost of man-hour of the members of the ININ staff, its participation in the refueling process was in smaller number than years before. (Author)

  7. The institutions forming the socioeconomic structure of Turkish private enterprises between the 13th and the 19th centuries: Akhism, the Lonca system and the Gedik system

    Directory of Open Access Journals (Sweden)

    Mehmet Özbirecikli

    2010-12-01

    principios éticos de la vida empresarial, en esencia, son los mismos. Dentro de este contexto, nos atrevemos a sugerir que las raíces del código ético de la vida empresarial turca se retrotraen en la historia a hace más de 800 años. Además, la similitud entre el funcionamiento presente y pasado indica que el origen de la formación de los aprendices para las empresas turcas tiene, igualmente, más de 800 años de historia.This study investigates three institutions forming the socioeconomic structure of Turkish private enterprises between the 13th and 19th Centuries: Akhism (13th-16th century, the Lonca System (the Guilds (16th-18th century, and the Gedik (Monopoly System (18th-20th century. The study particularly focuses on the social and economic rules, vocational training process, and organizational structure of the said institutions in order to discuss the effects of the socioeconomic structure of Turkish enterprises on economic and social development of private enterprises. The study also struggles to link between the relevant current applications and the applications in the past such as the social rules and vocational training. From economic point of view, both the statist structure of the State and the economic rules of the institutions herein caused private enterprises to remain small, and prevented them from having a competitive environment and having capital accumulation. As a result, enterprises could not benefit from new production techniques and the Turkish enterprise mentality fell behind modern developments. On the other hand, although these three systems were completely abolished in the early 20th Century, it is seen that especially traces of the Akhism and Lonca systems have still been surviving. Both the most of rules of Akhism and some of the duties of the board of directors of Lonca such as keeping moral standards of production and trade remind us of professional code of ethics of today’s modern business life. In other saying, there was code of

  8. Flywheel-Based Distributed Bus Signalling Strategy for the Public Fast Charging Station

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Sucic, Stepjan; Vasquez, Juan Carlos

    2014-01-01

    Fast charging stations (FCS) are able to recharge plug-in hybrid electric vehicles (pHEVs) in less than half an hour, thus representing an appealing concept to vehicle owners since the off-road time is similar as for refuelling at conventional public gas stations. However, since these FCS plugs...

  9. FOREWORD: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science

    Science.gov (United States)

    Jacob, Wolfgang; Linsmeier, Christian; Rubel, Marek

    2011-12-01

    The 13th International Workshop on Plasma-Facing Materials and Components (PFMC-13) jointly organized with the 1st International Conference on Fusion Energy Materials Science (FEMaS-1) was held in Rosenheim (Germany) on 9-13 May 2011. PFMC-13 is a successor of the International Workshop on Carbon Materials for Fusion Applications series. Between 1985 and 2003 ten 'Carbon Workshops' were organized in Jülich, Stockholm and Hohenkammer. Then it was time for a change and redefinition of the scope of the symposium to reflect the new requirements of ITER and the ongoing evolution in the field. Under the new name (PFMC-11), the workshop was first organized in 2006 in Greifswald, Germany and PFMC-12 took place in Jülich in 2009. Initially starting in 1985 with about 40 participants as a 1.5 day workshop, the event has continuously grown to about 220 participants at PFMC-12. Due to the joint organization with FEMaS-1, PFMC-13 set a new record with more than 280 participants. The European project Fusion Energy Materials Science, FEMaS, coordinated by the Max-Planck-Institut für Plasmaphysik (IPP), organizes and stimulates cooperative research activities which involve large-scale research facilities as well as other top-level materials characterization laboratories. Five different fields are addressed: benchmarking experiments for radiation damage modelling, the application of micro-mechanical characterization methods, synchrotron and neutron radiation-based techniques and advanced nanoscopic analysis based on transmission electron microscopy. All these fields need to be exploited further by the fusion materials community for timely materials solutions for a DEMO reactor. In order to integrate these materials research fields, FEMaS acted as a co-organizer for the 2011 workshop and successfully introduced a number of participants from research labs and universities into the PFMC community. Plasma-facing materials experience particularly hostile conditions as they are

  10. Design Status and Applications of Small reactors without On-site Refuelling

    International Nuclear Information System (INIS)

    Kuznetsov, V.

    2006-01-01

    Small reactors without on-site refuelling are the reactors that can operate without reloading and shuffling of fuel for a reasonably long period, consistent with plant economy and considerations of energy security, with no fresh or spent fuel being stored at a site during reactor operation. Such reactors could simplify the implementation of safeguards and provide certain guarantees of sovereignty to those countries that would prefer to lease fuel from a foreign vendor or, perhaps, an international fuel cycle centre. About 30 concepts of such reactors are being analyzed or developed in 6 IAEA Member States. They cover all principle reactor lines: water cooled, fast gas cooled, sodium cooled, lead or lead bismuth cooled and molten salt cooled reactors. An increased refuelling interval could be achieved with reduced core power density, burnable absorbers, or high conversion ratio. The design goals for small reactors without on-site refuelling, inter alia, include: difficult unauthorized access to fuel; design provisions to facilitate the implementation of safeguards; capability to survive all postulated accident scenarios without requiring emergency response in the public domain; economic competitiveness for anticipated market conditions and applications; the capability to achieve higher manufacturing quality through factory mass production, design standardization and common basis for design certification; and a flexibility in siting and applications. Such reactors are often considered in conjunction with fuel or NPP leasing Small reactors without on-site refuelling have many common technology development issues related to the provision of lifetime core operation, economic competitiveness, high level of safety and proliferation resistance. Reestablishment of a practice of licensing by test and establishment of legal provisions and the insurance scheme for a transit of fuel loads or factory fabricated reactors through the territory of a third country are mentioned as

  11. The influence of the placement method of fuel dispenserson the refueling cycle of vehicles

    Directory of Open Access Journals (Sweden)

    Levin Ruslan Yur’evich

    2015-05-01

    Full Text Available Logistics of production processes at a gas station is a critical point in the system of petroleum products, on the operation of which the effectiveness and sustainability of the transport sector depends. The provision and supply of road transportation of petroleum products is one of the most urgent tasks.Technological processes of reception, storage of fuel and refuelling of motor vehicles on petrol stations needs a scientific study of their structure and organization. At the design stage of a gas station, it is necessary to consider quite a lot of different factors: the configuration of the area under the gas station, the scheme of arrangement and the number of fuel dispensers, the trajectory of motion and the design of vehicles, calls to the station, distance between cars on duty, between the elements of buildings and equipment, as well as the requirements for fire, building, public, sanitary-epidemiological and state regulations. Therefore, the designer has a great opportunity for varying the parameters of the elements of the station, especially when considering the characteristics of the fueled vehicles.Typical projects at a same power station include various sizes, the seizure of land to build a station changes from planning decisions and the locations of all its technological elements. For increase of functioning efficiency of transportation systems of petroleum products in modern conditions on the basis of the design and technical innovations it is necessary to conduct special studies.Research planning decisions for a refueling station led to the conclusion that the placement of technological equipment in the refueling area has a certain impact on the length of vehicles service. Improving the layout of the refueling zone several times reduces the loss of the components of the refueling cycle time and increase the capacity of the station.Information base describing the stages of a gas station includes parts of refueling cycle time and

  12. Automated procedure for selection of optimal refueling policies for light water reactors

    International Nuclear Information System (INIS)

    Lin, B.I.; Zolotar, B.; Weisman, J.

    1979-01-01

    An automated procedure determining a minimum cost refueling policy has been developed for light water reactors. The procedure is an extension of the equilibrium core approach previously devised for pressurized water reactors (PWRs). Use of 1 1/2-group theory has improved the accuracy of the nuclear model and eliminated tedious fitting of albedos. A simple heuristic algorithm for locating a good starting policy has materially reduced PWR computing time. Inclusion of void effects and use of the Haling principle for axial flux calculations extended the nuclear model to boiling water reactors (BWRs). A good initial estimate of the refueling policy is obtained by recognizing that a nearly uniform distribution of reactivity provides low-power peaking. The initial estimate is improved upon by interchanging groups of four assemblies and is subsequently refined by interchanging individual assemblies. The method yields very favorable results, is simpler than previously proposed BWR fuel optimization schemes, and retains power cost as the objective function

  13. Interim qualitative risk assessment for an LNG refueling station and review of relevant safety issues

    Energy Technology Data Exchange (ETDEWEB)

    Siu, N.; Herring, S.; Cadwallader, L.; Reece, W.; Byers, J.

    1997-07-01

    This report is a qualitative assessment of the public and worker risk involved with the operation of a liquefied natural (LNG) vehicle refueling facility. This study includes facility maintenance and operations, tanker truck delivers and end-use vehicle fueling; it does not treat the risks of LNG vehicles on roadways. Accident initiating events are identified by using a Master Logic Diagram, a Failure Modes and Effects analysis and historical operating experiences. The event trees were drawn to depict possible sequences of mitigating events following the initiating events. The phenomenology of LNG and other vehicle fuels is discussed to characterize the hazard posed by LNG usage. Based on the risk modeling and analysis, recommendations are given to improve the safety of LNG refueling stations in the areas of procedures and training, station design, and the dissemination of best practice information throughout the LNG community.

  14. Qualitative Risk Assessment for an LNG Refueling Station and Review of Relevant Safety Issues

    Energy Technology Data Exchange (ETDEWEB)

    Siu, N.; Herring, J.S.; Cadwallader, L.; Reece, W.; Byers, J.

    1998-02-01

    This report is a qualitative assessment of the public and worker risk involved with the operation of a liquefied natural gas (LNG) vehicle refueling facility. This study includes facility maintenance and operations, tank truck deliveries, and end-use vehicle fueling; it does not treat the risks of LNG vehicles on roadways. Accident initiating events are identified by using a Master Logic Diagram, a Failure Modes and Effects Analysis, and historical operating experiences. The event trees were drawn to depict possible sequences of mitigating events following the initiating events. The phenomenology of LNG and other vehicle fuels is discussed to characterize the hazard posed by LNG usage. Based on the risk modeling and analysis, recommendations are given to improve the safety of LNG refueling stations in the areas of procedures and training, station design, and the dissemination of ``best practice`` information throughout the LNG community.

  15. Refueling Stop Activity Detection and Gas Station Extraction Using Crowdsourcing Vehicle Trajectory Data

    Directory of Open Access Journals (Sweden)

    YANG Wei

    2017-07-01

    Full Text Available In view of the deficiencies of current surveying methods of gas station, an approach is proposed to extract gas station from vehicle traces. Firstly, the spatial-temporal characteristics of individual and collective refueling behavior of trajectory is analyzed from aspects of movement features and geometric patterns. Secondly, based on Stop/Move model, the velocity sequence linear clustering algorithm is proposed to extract refueling stop tracks. Finally, using the methods including Delaunay triangulation, Fourier shape recognition and semantic constraints to identify and extract gas station. An experiment using 7 days taxi GPS traces in Beijing verified the novel method. The experimental results of 482 gas stations are extracted and the correct rate achieves to 93.1%.

  16. Management of individual and collective dosimetry at Fessenheim nuclear plant. Evaluation after refueling shutdown

    International Nuclear Information System (INIS)

    Lamarre, D.; Waller, A.

    1980-01-01

    The principle of dosimetry management chosen by Fessenheim nuclear power station was originally consisted of two phases: - an automatic acquisition of individual doses realized by stylodosimeter readers; - a deferred data processing by computer. The whole system has not been used during the shutdown for the first refuelling of unit number one in view of encountered difficulties with perfecting of automatic readers prototype, this last phase has been replaced by a manual acquisition of doses. The dosimetry data processing has two main objects: - supervision of individual dosimetry for people who work in the nuclear power station; - knowledge of doses assigned for each working and equipment. Moreover, a first dosimetric result of the shutdown for refuelling of unit number one, enables to notice the workings which doses are the most important and written in percentage of total doses: regulatory controls: about 19%; - steam generators working: 16%; - working decontamination and making health physics screen (lock chamber) 10% [fr

  17. REFUEL. The harvest so far. Papers to the 15th European Biomass Conference and Exhibition, May 2007

    International Nuclear Information System (INIS)

    2007-01-01

    The REFUEL project is designed to encourage a greater market penetration of biofuels. To help achieve this goal, we will develop a biofuels road map, consistent with EU biofuel policies and supported by stakeholders involved in the biofuels field. Starting early 2006, the project involves seven renowned partners and will take 24 months to complete. Refuel is financed by the European Commission under the 'Intelligent Energy - Europe' programme. This report contains papers that were presented at the title conference

  18. Environmental and biological monitoring of benzene during self-service automobile refueling.

    OpenAIRE

    Egeghy, P P; Tornero-Velez, R; Rappaport, S M

    2000-01-01

    Although automobile refueling represents the major source of benzene exposure among the nonsmoking public, few data are available regarding such exposures and the associated uptake of benzene. We repeatedly measured benzene exposure and uptake (via benzene in exhaled breath) among 39 self-service customers using self-administered monitoring, a technique rarely used to obtain measurements from the general public (130 sets of measurements were obtained). Benzene exposures averaged 2.9 mg/m(3) (...

  19. Optimal mission planning of GEO on-orbit refueling in mixed strategy

    Science.gov (United States)

    Chen, Xiao-qian; Yu, Jing

    2017-04-01

    The mission planning of GEO on-orbit refueling (OOR) in Mixed strategy is studied in this paper. Specifically, one SSc will be launched to an orbital slot near the depot when multiple GEO satellites are reaching their end of lives. The SSc replenishes fuel from the depot and then extends the lifespan of the target satellites via refueling. In the mixed scenario, only some of the target satellites could be served by the SSc, and the remaining ones will be fueled by Pseudo SScs (the target satellite which has already been refueled by the SSc and now has sufficient fuel for its operation as well as the fuel to refuel other target satellites is called Pseudo SSc here). The mission sequences and fuel mass of the SSc and Pseudo SScs, the dry mass of the SSc are used as design variables, whereas the economic benefit of the whole mission is used as design objective. The economic cost and benefit models are stated first, and then a mathematical optimization model is proposed. A comprehensive solution method involving enumeration, particle swarm optimization and modification is developed. Numerical examples are carried out to demonstrate the effectiveness of the model and solution method. Economic efficiencies of different OOR strategies are compared and discussed. The mixed strategy would perform better than the other strategies only when the target satellites satisfy some conditions. This paper presents an available mixed strategy scheme for users and analyzes its advantages and disadvantages by comparing with some other OOR strategies, providing helpful references to decision makers. The best strategy in practical applications depends on the specific demands and user preference.

  20. Unmanned Carrier-Based Aircraft System: Debate over Systems Role Led to Focus on Aerial Refueling

    Science.gov (United States)

    2016-03-24

    Unmanned Carrier-Based Aircraft System: Debate over System’s Role Led to Focus on Aerial Refueling Prior to February 2016, the Navy had planned to...Background In a May 2015 report, we found that the intended mission and required capabilities of UCLASS were under review as there was debate ...environments, or largely strike with limited surveillance capability operating in highly contested environments.2 This debate delayed the expected

  1. Management of refuelling, modifications and accidental shut-down of nuclear power plant

    International Nuclear Information System (INIS)

    1996-01-01

    This document is the appendix of HAF 0300 (91) 'Code on the Safety of Nuclear Power Plant Operation', which was promulgated by the National Nuclear Safety Administration (NNSA) on March 2, 1994, and has the same legal effect. This appendix is applicable to establish the administrative management procedures for refuelling, modifications and accidental shut-down in the period of operation of pressurized water thermal neutron reactor of nuclear power plants. The NNSA shall be responsible for interpretation of this document

  2. Investigating attitudes to hydrogen refuelling facilities and the social cost to local residents

    International Nuclear Information System (INIS)

    O'Garra, Tanya; Mourato, Susana; Pearson, Peter

    2008-01-01

    Vehicles fuelled by hydrogen (H 2 ) have attracted increasing attention because of their potentially enhanced environmental profiles. Their penetration into the vehicle stock will be influenced by the spread of refuelling facilities. This study investigates local attitudes towards the proposed installation of H 2 storage facilities at existing refuelling stations throughout London. Using multinomial logit analysis, we identify the determinants of attitudes. Results suggest that residents living very close to a proposed H 2 facility are less likely to be opposed than residents living 200-500 m away. Opposition appears to be determined by a lack of trust in safety regulations, non-environmental attitudes, and concerns about the existing local refuelling station. The social cost to local residents of a local H 2 storage facility was estimated using a method developed by Atkinson et al. [2004. 'Amenity' or 'eyesore'? Negative willingness to pay for options to replace electricity transmission towers. Applied Economics Letters 11(4), 203-208], which elicits the amount of time respondents are willing to commit to oppose a new facility development. Using the leisure rate of time, the social cost is estimated at just under Pounds 14 per local opposed resident. Add to this the WTP to support opposition efforts by a local group, and the value comes to just under Pounds 25 per opposed resident

  3. Refueling Behavior of Flexible Fuel Vehicle Drivers in the Federal Fleet

    Energy Technology Data Exchange (ETDEWEB)

    Daley, R.; Nangle, J.; Boeckman, G.; Miller, M.

    2014-05-01

    Federal fleets are a frequent subject of legislative and executive efforts to lead a national transition to alternative fuels and advanced vehicle technologies. Section 701 of the Energy Policy Act of 2005 requires that all dual-fueled alternative fuel vehicles in the federal fleet be operated on alternative fuel 100% of the time when they have access to it. However, in Fiscal Year (FY) 2012, drivers of federal flex fuel vehicles (FFV) leased through the General Services Administration refueled with E85 24% of the time when it was available--falling well short of the mandate. The U.S. Department of Energy's National Renewable Energy Laboratory completed a 2-year Laboratory Directed Research and Development project to identify the factors that influence the refueling behavior of federal FFV drivers. The project began with two primary hypotheses. First, information scarcity increases the tendency to miss opportunities to purchase E85. Second, even with perfect information, there are limits to how far drivers will go out of their way to purchase E85. This paper discusses the results of the project, which included a June 2012 survey of federal fleet drivers and an empirical analysis of actual refueling behavior from FY 2009 to 2012. This research will aid in the design and implementation of intervention programs aimed at increasing alternative fuel use and reducing petroleum consumption.

  4. Natural circulation analysis for the advanced neutron source reactor refueling process 11

    Energy Technology Data Exchange (ETDEWEB)

    Tucker, R.F.; Dasardhi, S.; Elkassabgi, Y. [Texas A& M Univ., Kingsville, TX (United States); Yoder, G.L. [Oak Ridge National Lab., TN (United States)

    1995-09-01

    During the refueling process of the Advanced Neutron Source Reactor (ANSR), the spent fuel elements must be moved from the primary coolant loop (containing D{sub 2}O), through a heavy water pool, and finally into a light water spent fuel storage area. The present refueling scheme utilizes remote refueling equipment to move the spent fuel elements through a D{sub 2}O filled stack and tunnel into a temporary storage canal. A transfer lock is used to move the spent fuel elements from the D{sub 2}O-filled interim storage canal to a light water pool. Each spent fuel element must be cooled during this process, using either natural circulation or forced convection. This paper presents a summary of the numerical techniques used to analyze natural circulation cooling of the ANSR fuel elements as well as selected results of the calculations. Details of the analysis indicate that coolant velocities below 10 cm/s exist in the coolant channels under single phase natural circulation conditions. Also, boiling does not occur within the channels if power levels are below a few hundred kW when the core transitions to natural circulation conditions.

  5. The achievement of on-load refuelling at Heysham 2 and Torness AGRs

    International Nuclear Information System (INIS)

    Sterland, P.R.; MacPherson, D.

    1995-01-01

    Heysham 2 and Torness are the last of the advanced gas cooled reactors constructed for the Central Electricity Generating Board and the South of Scotland Electricity Board. They are now operated by Nuclear Electric (NE) and Scottish Nuclear Limited (SNL), respectively. They were designed for on-load refuelling at high power and, being based on the design used for Hinkley Point B and Hunterston B, have benefited from experience at these stations. This paper examines the analysis work which was carried out in order to provide a sound, long-term, mainly probabilistic safety case which supports on-load refuelling. A significant problem has been that the design reliability of the microprocessor-based control and protection systems, used for the fuel route, could not be justified, and a number of changes to the overall protection system have had to be introduced to compensate for this. The safety assessment has covered the fuelling machine pressure boundary, the hoist and fuel assembly components, possible faults and the protection which is necessary to prevent them, the fuel and fuelling machine cooling requirements, the mechanical and radiological consequences of dropping fuel, and the effect of refuelling transients on the reactor and conventional plant. The resultant safety case complies with the stringent safety standards adopted by NE and SNL and accepted by the UK safety authority, the Nuclear Installations Inspectorate (NII). (author)

  6. Refueling availability for alternative fuel vehicle markets: Sufficient urban station coverage

    International Nuclear Information System (INIS)

    Melaina, Marc; Bremson, Joel

    2008-01-01

    Alternative fuel vehicles can play an important role in addressing the challenges of climate change, energy security, urban air pollution and the continued growth in demand for transportation services. The successful commercialization of alternative fuels for vehicles is contingent upon a number of factors, including vehicle cost and performance. Among fuel infrastructure issues, adequate refueling availability is one of the most fundamental to successful commercialization. A commonly cited source reports 164,300 refueling stations in operation nationwide. However, from the perspective of refueling availability, this nationwide count tends to overstate the number of stations required to support the widespread deployment of alternative fuel vehicles. In terms of spatial distribution, the existing gasoline station networks in many urban areas are more than sufficient. We characterize a sufficient level of urban coverage based upon a subset of cities served by relatively low-density station networks, and estimate that some 51,000 urban stations would be required to provide this sufficient level of coverage to all major urban areas, 33 percent less than our estimate of total urban stations. This improved characterization will be useful for engineering, economic and policy analyses. (author)

  7. Proceedings of the 17th annual day of scientific lectures and 13th annual meeting of the National Society of Black Physicists

    International Nuclear Information System (INIS)

    Reed, K.J.

    1990-01-01

    This report contains paper on the following topics: Evaporating Black Holes in an Inflationary Universe; Completely and Partially Polarized Signal Propagation; Is the Jet in Quasar 1038 + 064 Precessing? Physics of the Anisotropic Ferrite Wakefield Accelerator; Absolute Multilayer Characterization at High Spatial Resolution via Real Time Soft X-Ray Imaging; Update on the Status of the Superconducting Supercollider (SSC) Laboratory; The Use of Charge Coupled Devices in Remote Sensing from Space; A Scientific Visit to the USSR; Migdal-Kadanoff Study of Z 5 Symmetric Systems with Generalized Action -- Part 1; Migdal-Kadanoff Study of Z 5 Symmetric Systems with Generalized Action -- Part 2; and The Voyager Mission Exploration of the Solar System with Robotic Spacecraft

  8. Towards a standardized grasping and refuelling on-orbit servicing for geo spacecraft

    Science.gov (United States)

    Medina, Alberto; Tomassini, Angelo; Suatoni, Matteo; Avilés, Marcos; Solway, Nick; Coxhill, Ian; Paraskevas, Iosif S.; Rekleitis, Georgios; Papadopoulos, Evangelos; Krenn, Rainer; Brito, André; Sabbatinelli, Beatrice; Wollenhaupt, Birk; Vidal, Christian; Aziz, Sarmad; Visentin, Gianfranco

    2017-05-01

    Exploitation of space must benefit from the latest advances in robotics. On-orbit servicing is a clear candidate for the application of autonomous rendezvous and docking mechanisms. However, during the last three decades most of the trials took place combining extravehicular activities (EVAs) with telemanipulated robotic arms. The European Space Agency (ESA) considers that grasping and refuelling are promising near-mid-term capabilities that could be performed by servicing spacecraft. Minimal add-ons on spacecraft to enhance their serviceability may protect them for a changing future in which satellite servicing may become mainstream. ESA aims to conceive and promote standard refuelling provisions that can be installed in present and future European commercial geostationary orbit (GEO) satellite platforms and scientific spacecraft. For this purpose ESA has started the ASSIST activity addressing the analysis, design and validation of internal provisions (such as modifications to fuel, gas, electrical and data architecture to allow servicing) and external provisions (such as integrated berthing fixtures with peripheral electrical, gas, liquid connectors, leak check systems and corresponding optical and radio markers for cooperative rendezvous and docking). This refuelling approach is being agreed with European industry (OHB, Thales Alenia Space) and expected to be consolidated with European commercial operators as a first step to become an international standard; this approach is also being considered for on-orbit servicing spacecraft, such as the SpaceTug, by Airbus DS. This paper describes in detail the operational means, structure, geometry and accommodation of the system. Internal and external provisions will be designed with the minimum possible impact on the current architecture of GEO satellites without introducing additional risks in the development and commissioning of the satellite. End-effector and berthing fixtures are being designed in the range of few

  9. Development of a dose database in the refuelling scenario of a nuclear power plant for a virtual reality application

    International Nuclear Information System (INIS)

    Rodenas, J.; Zarza, I.; Pascual, A.; Felipe, A.; Sanchez-Mayoral, M.L.

    2002-01-01

    Operators in Nuclear Power Plants can receive high doses during refuelling operation. A training program simulating refuelling operations will be useful to reduce doses received by workers as well as to minimise operation time. With this goal in mind a Virtual Reality application is developed in the frame of CIPRES Project (Calculos Interactivos de Proteccion Radiologica en un Entorno de Simulacion - Interactive Calculations of Radiological Protection in a Simulation Environment), a RD project sponsored by IBERINCO and developed jointly by IBERINCO and the Nuclear Engineering Department of the Polytechnic University of Valencia. The Virtual Reality application requires the possibility of displaying doses, both instantaneous and accumulated, at all times during the operator training. Therefore, it is necessary to elaborate a database containing dose rates at every point of the refuelling plant. This database is elaborated from Radiological Protection Surveillance data measured throughout the plant during refuelling operation. To estimate doses throughout the refuelling plant some interpolation routines have been used. Different assumptions have been adopted in order to perform the interpolation and obtain consistent data. In this paper, procedures developed to elaborate the dose database for the Virtual Reality application are presented and analysed

  10. Automatic refueling platform and CRD remote handling device for BWR plant

    International Nuclear Information System (INIS)

    Kato, Hiroaki; Takagi, Kaoru

    1978-01-01

    In BWR plants, machines for replacing fuel assemblies and control rod drives are usually operated directly by personnel. An automatic refueling platform and a CRD remote handling device aiming at radiation exposure reduction and handling perfectness are described, which are already used in BWR plants. Automation of the former is achieved in transporting fuel assemblies between a reactor pressure vessel and a fuel storage pool, shuffling fuel assemblies in a reactor core and moving fuel assemblies in a fuel storage pool. In the latter, replacement of CRDs is nearly all performed remotely. (Mori, K.)

  11. Extending the features of RBMK refuelling machine simulator with a training tool based on virtual reality

    International Nuclear Information System (INIS)

    Khoudiakov, M.; Slonimsky, V.; Mitrofanov, S.

    2004-01-01

    The paper describes a continuation of efforts of an international Russian - Norwegian joint team to improve operational safety during the refuelling process of an RBMK-type reactor by implementing a training simulator based on an innovative Virtual Reality (VR) approach. During the preceding 1st stage of the project a display-based simulator was extended with VR models of the real Refuelling Machine (RM) and its environment in order to improve both the learning process and operation's effectiveness. The simulator's challenge is to support the performance (operational activity) of RM operational staff firstly by helping them to develop basic knowledge and skills as well as to keep skilled staff in close touch with the complex machinery of the Refuelling Machine. During the 2nd stage of the joint project the functional scope of the VR-simulator was greatly enhanced - firstly, by connecting to the RBMK-unit full-scope simulator, and, secondly, by including a training program and simulator model upgrade. The present 3rd stage of the Project is primarily oriented towards the improvement of the training process for maintenance and operational personnel by means of a development of the Training Support Methodology and Courses (TSMC) to be based on Virtual Reality and enlarged functionality of 3D and process modelling. The TMSC development is based on Russian and International Regulatory Bodies requirements and recommendations. Design, development and creation of a specialised VR-based Training System for RM Maintenance Personnel are very important for the Russian RBMK plants. The main goal is to create a powerful, autonomous VR-based simulator for training technical maintenance personnel on the Refuelling Machine. VR based training is expected to improve the effect of training compared to the current training based on traditional methods using printed documentation. The LNPP management and the Regulatory Bodies supported this goal. The VR-based Training System should

  12. The development of calculational methods and assessment standards for AGR refuelling safety cases

    International Nuclear Information System (INIS)

    Dawson, J.W.; Grant, R.J.; Thomas, D.L.

    1995-01-01

    This paper considers the methods used to assess the protection needed against hazards in the AGR fuel route. These methods are all directed towards the objective of showing that all postulated events taking place during refuelling are acceptable within agreed criteria of severity versus frequency. The methods allow the determination of temperatures arising in various hazards, from which estimates can be made of the radiological release, if any, which would occur. Comparison of this estimate with the level considered acceptable at the fault frequency leads to the requirement for protection. (author)

  13. Integrated head area design of KNGR to reduce refueling outage duration

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Woo Tae; Park, Chi Yong; Kim, In Hwan; Kim, Dae Woong [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    In the design of KNGR (Korea Next Generation Reactor), we believe that economy is one of the most important factors to be considered. Thus, we reviewed and evaluated the consequences of designing the head area into an integrated package from an economical point of view. The refueling outage durations of the nuclear power plants currently in operation in Korea, some having and others not having integrated head package, are compared. This paper discusses the characteristics of head area design and the critical design issues of KNGR head area to evaluate the effect of the head area characteristics on the outage duration. 8 refs., 4 figs. (Author)

  14. Integrated head area design of KNGR to reduce refueling outage duration

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Woo Tae; Park, Chi Yong; Kim, In Hwan; Kim, Dae Woong [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    In the design of KNGR (Korea Next Generation Reactor), we believe that economy is one of the most important factors to be considered. Thus, we reviewed and evaluated the consequences of designing the head area into an integrated package from an economical point of view. The refueling outage durations of the nuclear power plants currently in operation in Korea, some having and others not having integrated head package, are compared. This paper discusses the characteristics of head area design and the critical design issues of KNGR head area to evaluate the effect of the head area characteristics on the outage duration. 8 refs., 4 figs. (Author)

  15. Study of Some Innovant Reactors without on- Site Refueling with Triso and Cermet Fuel

    OpenAIRE

    A.Chetaine; A. Benchrif; H. Amsil; V. Kuznetsov; Y. Shimazu

    2012-01-01

    The evaluation of unit cell neutronic parameters and lifetime for some innovant reactors without on sit-refuling will be held in this work. the behavior of some small and medium reactors without on site refueling with triso and cermet fuel. For the FBNR long life except we propose to change the enrichment of the Cermet MFE to 9%. For the AFPR reactor we can see that the use of the Cermet MFE can extend the life of this reactor but to maintain the same life period for AFPR...

  16. The design and use of proficiency based BWR reactor maintenance and refuelling training mockups

    International Nuclear Information System (INIS)

    Ford, G.J.

    1996-01-01

    The purpose of this paper is to describe the ABB experience with the design and use of boiling water reactor training facilities. The training programs were developed and implemented in cooperation with the nuclear utilities. ABB operates two facilities, the ABB ATOM Light Water Reactor Service Center located in Vasteras, Sweden, and the ABB Combustion Engineering Nuclear Operations BWR Training Center located in Chattanooga, Tennessee, USA. The focus of the training centers are reactor maintenance and refueling activities plus the capability to develop and qualify tools, procedures and repair techniques

  17. Charge imbalance

    International Nuclear Information System (INIS)

    Clarke, J.

    1981-01-01

    This article provides a long theoretical development of the main ideas of charge imbalance in superconductors. Concepts of charge imbalance and quasiparticle charge are introduced, especially in regards to the use of tunnel injection in producing and detecting charge imbalance. Various mechanisms of charge relaxation are discussed, including inelastic scattering processes, elastic scattering in the presence of energy-gap anisotropy, and various pair-breaking mechanisms. In each case, present theories are reviewed in comparison with experimental data

  18. Target post-evaluation of China's “12th Five-Year” oil and gas exploration and development planning and its “13th Five-Year” target prediction

    Directory of Open Access Journals (Sweden)

    Jiping Pan

    2016-03-01

    Full Text Available In the turn of 12th and 13th “Five-Year Plan” of China, the global oil and gas market changes greatly. In this regard, the target post-evaluation of the “12th Five-Year” oil and gas exploration and development planning was conducted, which is of significant importance to scientifically and reasonably making the specific “13th Five-Year” oil and gas exploration and development target planning. The post-evaluation results indicate that, in the period of “12th Five-Year Plan”, the oil and gas exploration and development targets of China were satisfactorily completed, but some deficiencies still existed. For example, the target of oil production (2 × 108 t was overfulfilled, while the target of oil reserves (65 × 108 t remained 6.4% outstanding. The target of gas reserves (3.5 × 1012 m3 was overfulfilled, while the target of gas production (1385 × 108 m3 remained 6.2% outstanding. Moreover, the targets of unconventional gases were not satisfactorily completed-shale gas being better than coalbed methane (CBM. Failures to fulfill some targets in “12th Five-Year Plan” were primarily attributed to the slowdown of oil and gas consumption growth, sharp drop of oil price, downgrading of resources, and changes of statistic basis under the new normal. The forecast results suggest that, in the period of “13th Five-Year Plan”, given USD50–70/bbl of world oil price, China's annual average incremental conventional oil and gas in place will be 10.0 × 108–12.0 × 108 t and 6000 × 108–8000 × 108 m3 respectively, annual average incremental shale gas and CBM in place will be 1000 × 108–2000 × 108 m3 and 500 × 108–1000 × 108 m3 respectively, and annual oil production will be about 2.0 × 108 t. By 2020, China's annual gas production will approach 1800 × 108–2000 × 108 m3 (shale gas: 200 × 108 m3, and CBM: 150 × 108 m3.

  19. Drogue tracking using 3D flash lidar for autonomous aerial refueling

    Science.gov (United States)

    Chen, Chao-I.; Stettner, Roger

    2011-06-01

    Autonomous aerial refueling (AAR) is an important capability for an unmanned aerial vehicle (UAV) to increase its flying range and endurance without increasing its size. This paper presents a novel tracking method that utilizes both 2D intensity and 3D point-cloud data acquired with a 3D Flash LIDAR sensor to establish relative position and orientation between the receiver vehicle and drogue during an aerial refueling process. Unlike classic, vision-based sensors, a 3D Flash LIDAR sensor can provide 3D point-cloud data in real time without motion blur, in the day or night, and is capable of imaging through fog and clouds. The proposed method segments out the drogue through 2D analysis and estimates the center of the drogue from 3D point-cloud data for flight trajectory determination. A level-set front propagation routine is first employed to identify the target of interest and establish its silhouette information. Sufficient domain knowledge, such as the size of the drogue and the expected operable distance, is integrated into our approach to quickly eliminate unlikely target candidates. A statistical analysis along with a random sample consensus (RANSAC) is performed on the target to reduce noise and estimate the center of the drogue after all 3D points on the drogue are identified. The estimated center and drogue silhouette serve as the seed points to efficiently locate the target in the next frame.

  20. REFUEL. Potential and realizable cost reduction of 2nd generation biofuels

    International Nuclear Information System (INIS)

    Londo, H.M.; Deurwaarder, E.P.; Lensink, S.M.; Junginer, H.M.; De Wit, M.

    2007-05-01

    In the REFUEL project steering possibilities for and impacts of a greater market penetration of biofuels are assessed. Several benefits are attributed to second generation biofuels, fuels made from lignocellulosic feedstock, such as higher productivity, less impacts on land use and food markets and improved greenhouse gas emission reductions. The chances of second generation biofuels entering the market autonomously are assessed and several policy measures enhancing those changes are evaluated. It shows that most second generation biofuels might become competitive in the biofuel market, if the production of biodiesel from oil crops becomes limited by land availability. Setting high biofuel targets, setting greenhouse gas emissions caps on biofuel and setting subtargets for second generation biofuels, all have a similar impact of stimulating second generation's entrance into the biofuel market. Contrary, low biofuel targets and high imports can have a discouraging impact on second generation biofuel development, and thereby on overall greenhouse gas performance. Since this paper shows preliminary results from the REFUEL study, one is advised to contact the authors before quantitatively referring to this paper

  1. The achievement of on-load refuelling at Heysham 2 and Torness AGRs

    International Nuclear Information System (INIS)

    Sterland, P.R.; MacPherson, D.

    1995-01-01

    Heysham 2 and Torness are the last of the advanced gas cooled reactors (AGR) constructed for the Central Electricity Generating Board and the South of Scotland Electricity Board. They are now operated by Nuclear Electric (NE) and Scottish Nuclear Limited (SNL) respectively. They were designed for on load refuelling at high power and being based on the design used for Hinkley Point B and Hunterston B, have benefited from experience at these stations. This paper examines the analysis work which was carried out in order to provide a sound, long term, mainly probabilistic safety case which supports on load refuelling. A significant problem has been that the design reliability of the microprocessor based control and protection systems, used for the fuel route, could not be justified and a number of changes to the overall protection system have had to be introduced to compensate for this. The resultant safety case complies with the stringent safety standards adopted by NE and SNL and accepted by the UK safety authority, the Nuclear Installations Inspectorate (NII). (author)

  2. Use of an advanced document system in post-refuelling updating of nuclear power plant documentation

    International Nuclear Information System (INIS)

    Puech Suanzes, P.; Cortes Soler, M.

    1993-01-01

    This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

  3. Optimization of refueling-shuffling scheme in PWR core by random search strategy

    International Nuclear Information System (INIS)

    Wu Yuan

    1991-11-01

    A random method for simulating optimization of refueling management in a pressurized water reactor (PWR) core is described. The main purpose of the optimization was to select the 'best' refueling arrangement scheme which would produce maximum economic benefits under certain imposed conditions. To fulfill this goal, an effective optimization strategy, two-stage random search method was developed. First, the search was made in a manner similar to the stratified sampling technique. A local optimum can be reached by comparison of the successive results. Then the other random experiences would be carried on between different strata to try to find the global optimum. In general, it can be used as a practical tool for conventional fuel management scheme. However, it can also be used in studies on optimization of Low-Leakage fuel management. Some calculations were done for a typical PWR core on a CYBER-180/830 computer. The results show that the method proposed can obtain satisfactory approach at reasonable low computational cost

  4. Enabling fast charging – Vehicle considerations

    Energy Technology Data Exchange (ETDEWEB)

    Meintz, Andrew; Zhang, Jiucai; Vijayagopal, Ram; Kreutzer, Cory; Ahmed, Shabbir; Bloom, Ira; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Dufek, Eric J.; Francfort, James; Hardy, Keith; Jansen, Andrew N.; Keyser, Matthew; Markel, Anthony; Michelbacher, Christopher; Mohanpurkar, Manish; Pesaran, Ahmad; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Tanim, Tanvir

    2017-11-01

    To achieve a successful increase in the plug-in battery electric vehicle (BEV) market, it is anticipated that a significant improvement in battery performance is required to improve the range that BEVs can travel and the rate at which they can be recharged. While the range that BEVs can travel on a single recharge is improving, the recharging rate is still much slower than the refueling rate of conventional internal combustion engine vehicles. To achieve comparable recharge times, we explore the vehicle considerations of charge rates of at least 400 kW. Faster recharge is expected to significantly mitigate the perceived deficiencies for long-distance transportation, to provide alternative charging in densely populated areas where overnight charging at home may not be possible, and to reduce range anxiety for travel within a city when unplanned charging may be required. This substantial increase in charging rate is expected to create technical issues in the design of the battery system and vehicle’s electrical architecture that must be resolved. This work focuses on battery system thermal design and total recharge time to meet the goals of implementing higher charge rates and the impacts of the expected increase in system voltage on the components of the vehicle.

  5. WLAN Hot Spot services for the automotive and oil industries :a business analysis Or : "Refuel the car with petrol and information, both ways at the gas station"

    NARCIS (Netherlands)

    L-F. Pau (Louis-François); M.H.P. Oremus

    2003-01-01

    textabstractWhile you refuel for gas ,why not refuel for information or download vehicle data ? This paper analyzes in extensive detail the user segmentation by vehicle usage , service offering , and full business models from WLAN hot spot services delivered to vehicles (private, professional ,

  6. Byzantine Glazed Ceramics in the Cities of the Northern Black Sea Region in the Golden Horde Period (Second Half of the 13th to the Late 14th Century

    Directory of Open Access Journals (Sweden)

    Bocharov Sergei G.

    2012-03-01

    Full Text Available Glazed ceramics of Byzantine origin, which came has been found on town sites of the Northern Black Sea region referring to the Golden Horde period (second half of the 13th – late 14th cc., is characterized in the article. Materials from the urban centers of the Crimea (Solkhat, Sudak, Kaffa, Chersonese, Cembalo, the Azov Sea region (Azaq, and the lower reaches of the Don and Kuban rivers are discussed. The applied principles of ceramics classification have been formulated. On their basis, six major groups of Byzantine ceramic imports have been identified. For each group, a description of morphological and technological features, ornamentation methods and motifs has been provided; chronological framework of their arrival in the region has been specified. Conclusions have been offered as to the extent of distribution and the role played by diverse groups of Byzantine glazed ceramics in the cities of the Northern Black Sea region.

  7. Developing a virtual reality application for training Nuclear Power Plant operators: Setting up a database containing dose rates in the refuelling plant

    International Nuclear Information System (INIS)

    Rodenas, J.; Zarza, I.; Burgos, M. C.; Felipe, A.; Sanchez-Mayoral, M. L.

    2004-01-01

    Operators in Nuclear Power Plants can receive high doses during refuelling operations. A training programme for simulating refuelling operations will be useful in reducing the doses received by workers as well as minimising operation time. With this goal in mind, a virtual reality application is developed within the framework of the CIPRES project. The application requires doses, both instantaneous and accumulated, to be displayed at all times during operator training. Therefore, it is necessary to set up a database containing dose rates at every point in the refuelling plant. This database is based on radiological protection surveillance data measured in the plant during refuelling operations. Some interpolation routines have been used to estimate doses through the refuelling plant. Different assumptions have been adopted in order to perform the interpolation and obtain consistent data. In this paper, the procedures developed to set up the dose database for the virtual reality application are presented and analysed. (authors)

  8. Status and Prospects of the Global Automotive Fuel Cell Industry and Plans for Deployment of Fuel Cell Vehicles and Hydrogen Refueling Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Greene, David L [ORNL; Duleep, Gopal [HD Systems

    2013-06-01

    Automobile manufacturers leading the development of mass-market fuel cell vehicles (FCVs) were interviewed in Japan, Korea, Germany and the United States. There is general agreement that the performance of FCVs with respect to durability, cold start, packaging, acceleration, refueling time and range has progressed to the point where vehicles that could be brought to market in 2015 will satisfy customer expectations. However, cost and the lack of refueling infrastructure remain significant barriers. Costs have been dramatically reduced over the past decade, yet are still about twice what appears to be needed for sustainable market success. While all four countries have plans for the early deployment of hydrogen refueling infrastructure, the roles of government, industry and the public in creating a viable hydrogen refueling infrastructure remain unresolved. The existence of an adequate refueling infrastructure and supporting government policies are likely to be the critical factors that determine when and where hydrogen FCVs are brought to market.

  9. EDITORIAL: Invited papers from the 15th International Congress on Plasma Physics combined with the 13th Latin American Workshop on Plasma Physics Invited papers from the 15th International Congress on Plasma Physics combined with the 13th Latin American Workshop on Plasma Physics

    Science.gov (United States)

    Soto, Leopoldo

    2011-07-01

    The International Advisory Committee of the 15th International Congress on Plasma Physics (ICPP 2010) and the International Advisory Committee of the 13th Latin American Workshop on Plasma Physics (LAWPP 2010) both agreed to hold this combined meeting ICPP-LAWPP-2010 in Santiago de Chile, 8-13 August 2010, considering the celebration of the Bicentennial of Chilean Independence. ICPP-LAWPP-2010 was organized by the Thermonuclear Plasma Department of the Chilean Nuclear Energy Commission (CCHEN) as part of its official program, within the framework of the Chilean Bicentennial activities. This event was also a scientific and academic activity of the project `Center for Research and Applications in Plasma Physics and Pulsed Power, P4', supported by the National Scientific and Technological Commission, CONICYT-Chile, under grant ACT-26. The International Congress on Plasma Physics was first held in Nagoya in 1980, and was followed by: Gothenburg (1982), Lausanne (1984), Kiev (1987), New Delhi (1989), Innsbruck (1992), Foz do Iguacu (1994), Nagoya (1996), Prague (1998), Quebec City (2000), Sydney (2002), Nice (2004), Kiev (2006) and Fukuoka (2008). The purpose of the Congress is to discuss recent progress and outlooks in plasma science, covering fundamental plasma physics, fusion plasmas, astrophysical plasmas, plasma applications, etc. The Latin American Workshop on Plasma Physics was first held in 1982 in Cambuquira, Brazil, followed by: Medellín (1985), Santiago (1988), Buenos Aires (1990), Mexico City (1992), Foz do Iguacu (1994, also combined with ICPP), Caracas (1997), Tandil (1998), La Serena (2000), Sao Pedro (2003), Mexico City (2005) and Caracas (2007). The purpose of the Latin American Workshop on Plasma Physics is to provide a forum in which the achievements of the Latin American plasma physics communities can be displayed, as well as to foster collaboration between plasma scientists within the region and elsewhere. The Program of ICPP-LAWPP-2010 included

  10. Fractional charges

    International Nuclear Information System (INIS)

    Saminadayar, L.

    2001-01-01

    20 years ago fractional charges were imagined to explain values of conductivity in some materials. Recent experiments have proved the existence of charges whose value is the third of the electron charge. This article presents the experimental facts that have led theorists to predict the existence of fractional charges from the motion of quasi-particles in a linear chain of poly-acetylene to the quantum Hall effect. According to the latest theories, fractional charges are neither bosons nor fermions but anyons, they are submitted to an exclusive principle that is less stringent than that for fermions. (A.C.)

  11. GPS navigation algorithms for Autonomous Airborne Refueling of Unmanned Air Vehicles

    Science.gov (United States)

    Khanafseh, Samer Mahmoud

    Unmanned Air Vehicles (UAVs) have recently generated great interest because of their potential to perform hazardous missions without risking loss of life. If autonomous airborne refueling is possible for UAVs, mission range and endurance will be greatly enhanced. However, concerns about UAV-tanker proximity, dynamic mobility and safety demand that the relative navigation system meets stringent requirements on accuracy, integrity, and continuity. In response, this research focuses on developing high-performance GPS-based navigation architectures for Autonomous Airborne Refueling (AAR) of UAVs. The AAR mission is unique because of the potentially severe sky blockage introduced by the tanker. To address this issue, a high-fidelity dynamic sky blockage model was developed and experimentally validated. In addition, robust carrier phase differential GPS navigation algorithms were derived, including a new method for high-integrity reacquisition of carrier cycle ambiguities for recently-blocked satellites. In order to evaluate navigation performance, world-wide global availability and sensitivity covariance analyses were conducted. The new navigation algorithms were shown to be sufficient for turn-free scenarios, but improvement in performance was necessary to meet the difficult requirements for a general refueling mission with banked turns. Therefore, several innovative methods were pursued to enhance navigation performance. First, a new theoretical approach was developed to quantify the position-domain integrity risk in cycle ambiguity resolution problems. A mechanism to implement this method with partially-fixed cycle ambiguity vectors was derived, and it was used to define tight upper bounds on AAR navigation integrity risk. A second method, where a new algorithm for optimal fusion of measurements from multiple antennas was developed, was used to improve satellite coverage in poor visibility environments such as in AAR. Finally, methods for using data-link extracted

  12. Investigation of in-cabin volatile organic compounds (VOCs) in taxis; influence of vehicle's age, model, fuel, and refueling.

    Science.gov (United States)

    Bakhtiari, Reza; Hadei, Mostafa; Hopke, Philip K; Shahsavani, Abbas; Rastkari, Noushin; Kermani, Majid; Yarahmadi, Maryam; Ghaderpoori, Afshin

    2018-06-01

    The air pollutant species and concentrations in taxis' cabins can present significant health impacts on health. This study measured the concentrations of benzene, toluene, ethylbenzene, xylene (BTEX), formaldehyde, and acetaldehyde in the cabins of four different taxi models. The effects of taxi's age, fuel type, and refueling were investigated. Four taxi models in 3 age groups were fueled with 3 different fuels (gas, compressed natural gas (CNG), and liquefied petroleum gas (LPG)), and the concentrations of 6 air pollutants were measured in the taxi cabins before and after refueling. BTEX, formaldehyde, and acetaldehyde sampling were actively sampled using NIOSH methods 1501, 2541, and 2538, respectively. The average BTEX concentrations for all taxi models were below guideline values. The average concentrations (±SD) of formaldehyde in Model 1 to Model 4 taxis were 889 (±356), 806 (±323), 1144 (±240), and 934 (±167) ppbv, respectively. Acetaldehyde average concentrations (±SD) in Model 1 to Model 4 taxis were 410 (±223), 441 (±241), 443 (±210), and 482 (±91) ppbv, respectively. Refueling increased the in-vehicle concentrations of pollutants primarily the CNG and LPG fuels. BTEX concentrations in all taxi models were significantly higher for gasoline. Taxi age inversely affected formaldehyde and acetaldehyde. In conclusion, it seems that refueling process and substitution of gasoline with CNG and LPG can be considered as solutions to improve in-vehicle air concentrations for taxis. Copyright © 2018. Published by Elsevier Ltd.

  13. Design for air-to-air refuelling operations; new passenger and tanker aircraft design for AAR scenarios

    NARCIS (Netherlands)

    Li, M.O.

    2014-01-01

    Air-to-air refuelling is a way to improve fuel efficiency of the overall transport system without waiting for the improvement of basic aviation technology. To take full advantage of such an operation, both passenger aircraft and tanker aircraft (which deliver required fuel to the passenger aircraft

  14. Research and Development of a PEM Fuel Cell, Hydrogen Reformer, and Vehicle Refueling Facility

    Energy Technology Data Exchange (ETDEWEB)

    Edward F. Kiczek

    2007-08-31

    Air Products and Chemicals, Inc. has teamed with Plug Power, Inc. of Latham, NY, and the City of Las Vegas, NV, to develop, design, procure, install and operate an on-site hydrogen generation system, an alternative vehicle refueling system, and a stationary hydrogen fuel cell power plant, located in Las Vegas. The facility will become the benchmark for validating new natural gas-based hydrogen systems, PEM fuel cell power generation systems, and numerous new technologies for the safe and reliable delivery of hydrogen as a fuel to vehicles. Most important, this facility will serve as a demonstration of hydrogen as a safe and clean energy alternative. Las Vegas provides an excellent real-world performance and durability testing environment.

  15. Feasibility study on application of WIMS-AECL to Wolsong-1 refueling simulation

    International Nuclear Information System (INIS)

    Kim, Y.; Lee, S.

    2005-01-01

    'Full text:' At present, in Wolsong nuclear power plant, all of the reactor physics calculations are based on the cell code POWDERPUFS-V (PPV). PPV code use semi-empirical approximation rather than direct solving of transport equation with robust methodology. Switch from PPV to more robust transport solver is world-wide trend in addition to GAI issued from Canadian regulatory body (CNSC). In this paper, feasibility study on the replacement of cell code POWDERPUFS-V (PPV) with WIMS-AECL was performed for Wolsong-1 NPP. The impact of the cell code replacement on physics design parameters and refueling simulation was assessed. First, fuel isotopic composition affecting core reactivity is compared between PPV and WIMS-AECL. Generally it was shown that WIMS-AECL predicts higher uranium fissile concentration while less plutonium concentration as fuel burnup increases compared with prediction of PPV. Infinite multiplication factor of WIMS-AECL is slightly less predicted than that of PPV. Also core reactivity change from operating condition change such as moderator temperature, coolant temperature, fuel temperature and coolant density were compared for both fresh fuel and equilibrium fuel. Specially the analysis of void reactivity which is current hot issue for positive reactivity insertion in LOCA was also performed. As a result of this study, all of WIMS-AECL results were similar to PPV based calculation in the fresh fuel. However, there is a tendency that the deviation between the two codes increases as the fuel burn-up increases. This is because PPV code was made from the laboratory condition with fresh fuel and low fuel temperature. Second, refueling simulation with WIMS-AECL based RFSP was tried to compare with current PPV based RFSP simulation for about 20 months (5775FPD ∼ 6324FPD). To cover wide range of operating parameter condition such as purity of moderator and coolant and boron concentration, tremendous amount of computation time is needed with WIMS

  16. Detection and Tracking Strategies for Autonomous Aerial Refuelling Tasks Based on Monocular Vision

    Directory of Open Access Journals (Sweden)

    Yingjie Yin

    2014-07-01

    Full Text Available Detection and tracking strategies based on monocular vision are proposed for autonomous aerial refuelling tasks. The drogue attached to the fuel tanker aircraft has two important features. The grey values of the drogue's inner part are different from the external umbrella ribs, as shown in the image. The shape of the drogue's inner dark part is nearly circular. According to crucial prior knowledge, the rough and fine positioning algorithms are designed to detect the drogue. Particle filter based on the drogue's shape is proposed to track the drogue. A strategy to switch between detection and tracking is proposed to improve the robustness of the algorithms. The inner dark part of the drogue is segmented precisely in the detecting and tracking process and the segmented circular part can be used to measure its spatial position. The experimental results show that the proposed method has good performance in real-time and satisfied robustness and positioning accuracy.

  17. Hydrogen for buses in London: A scenario analysis of changes over time in refuelling infrastructure costs

    International Nuclear Information System (INIS)

    Shayegan, S.; Pearson, P.J.G.; Hart, D.

    2009-01-01

    The lack of a hydrogen refuelling infrastructure is one of the major obstacles to the introduction of the hydrogen vehicles to the road transport market. To help overcome this hurdle a likely transitional solution is to introduce hydrogen for niche applications such as buses or other types of fleet vehicles for which fuel demand is predictable and localised. This paper analyses the costs of different hydrogen production-delivery pathways, via a case study of buses in London. Scenario analysis over time (2007-2025) is used to investigate potential changes to the cost of hydrogen as a result of technology development, growing demand for hydrogen and changes in energy prices (gas and electricity). It is found that factors related to hydrogen demand have the greatest effect on the unit cost of hydrogen, while for the whole of the analysis period, on-site SMR (steam methane reforming) remains the least-cost production-delivery pathway. (author)

  18. Operational transparency: an advanced safeguards strategy for future on-load refuelled reactors

    International Nuclear Information System (INIS)

    Whitlock, J.J.; Trask, D.

    2012-01-01

    The IAEA's system for tracking fuel movement in an on-load refuelled heavy-water reactor is robust, but an opportunity remains to exploit the wealth of data streaming from the reactor vault during operation and provide real-time, third-party monitoring of reactor status and history. This concept of Operational Transparency would require that large amounts of operational data be reduced in near-real time to a small subset of high-level information. Operational Transparency would enhance the IAEA's ability to monitor the state of the core to an unprecedented level. This paper provides an overview of the novel concept of Operational Transparency in heavy water reactors, using potential application to CANDU reactors as an example, and explores some of the technical challenges that will need to be solved for efficient implementation. (author)

  19. Device for refueling a nuclear reactor having a core comprising a plurality of fuel assemblies

    International Nuclear Information System (INIS)

    Van Santen, A.; Elofsson, K.

    1975-01-01

    A nuclear reactor formed of fuel assemblies each including a plurality of parallel fuel rods arranged in a predetermined fuel rod lattice, which rods are freely extractable and insertable at one end of the fuel assembly, is refueled by extracting from one of the fuel assemblies a number of fuel rods substantially less than the total number of fuel rods and replacing these by inserting new fuel rods into the vacated positions. The removal and return of the rods is produced by a tool having a plurality of gripping members capable of engaging shoulders beneath heads formed on the upper ends of the fuel rods. This may be accomplished by providing a tool having a number of gripping members attached to the tool body corresponding to the lattice positions of the fuel rods to be extracted, having gripping members which can be pushed together to grip beneath shoulders on the upper ends of the fuel rods. (Official Gazette)

  20. Validation of physics model of FARE-Tool by comparison of RFSP flux simulations with measurements at discrete refuelling steps

    International Nuclear Information System (INIS)

    Shad, M.A.

    1995-01-01

    In CANDU 6 the on-power refuelling is done in the direction of the coolant flow through the channel, flow being in alternate direction in adjacent channels. The channel flow pushes the fuel string (a total of 20 bundles with the 8-bundle fuelling scheme) towards the downstream Fuelling Machine (FM), obviating the need for the upstream FM to insert the rams into the active core to push the fuel. In some channels of the outer core region, however, the coolant flow is low and the hydraulic drag is not enough to push the fuel string. In these channels a Flow Assist Ram Extension (FARE) tool is used during refuelling to augment the flow and hence enhance the hydraulic drag required to push the fuel string. The FARE-Tool is a strong neutron absorber and its use results in a severe local flux depression. During the refuelling process, when the FARE-Tool travels in the immediate vicinity of a Reactor Regulating System (RRS) detector, the spatial control system causes a short-term zone-fill reduction in an attempt to maintain the reference zone powers. This short term zone drain may in turn result in a single channel ROP trip of the SDS l or SDS2 reactor protection system. Therefore, the control room operator is always interested in minimizing the occurrence of this category of trip for obvious economic reasons. The physics modelling of the FARE-Tool used in the 2-neutron-energy-group 3-dimensional diffusion code RFSP is validated by comparing the simulated response of the in-core detectors with the measured response of the same detectors during refuelling. These measurements were recorded during a specially scheduled refuelling of channel B09 at the Point Lepreau Generating Station on 1993 July 6 at 3591 Equivalent Full Power Days (EFPDs). 3 refs., 10 tabs., 1 fig

  1. General empirical model for 60Co generation in pressurized water reactors with continuous refueling

    International Nuclear Information System (INIS)

    Urrutia, G.A.; Blesa, M.A.; Fernandez-Prini, R.; Maroto, A.J.G.

    1984-01-01

    A simplified model is presented that permits one to calculate the average activity on the fuel elements of a reactor that operates under continuous refueling, based on the assumption of crud interchange between fuel element surface and coolant in the form of particulate material only and using the crud specific activity as an empirical parameter determined in plant. The net activity flux from core to out-of-core components is then calculated in the form of parametric curves depending on crud specific activity and rate of particulate release from fuel surface. In pressure vessel reactors, contribution to out-ofcore radionuclide inventory arising in the release of activated materials from core components must be taken into account. The contribution from in situ activation of core components is calculated from the rates of release and the specific activities corresponding to the exposed surface of the component (calculated in a straightforward way on the basis of core geometry and neutron fluxes). The rates of release can be taken from the literature, or in the case of cobalt-rich alloys, can be calculated from experimentally determined cobalt contents of structural components and crud. For pressure vessel reactors operating under continuous refueling, activation of deposited crud and release of activated materials are compared; the latter, in certain cases, may represent a sizable (and even the largest) fraction of the total cobalt activity. It is proposed that the ratio of activities of 59 Fe to 54 Mn may be used as a diagnostic tool for in situ activation of structural materials; available data indicate ratios close to unity for pressure tube heavy water reactors (no in situ activation) and ratios around 4 to 10 for pressure vessel, heavy water reactors

  2. 13th European Conference on Applied Superconductivity

    CERN Document Server

    2017-01-01

    EUCAS is a worldwide forum for scientists and engineers, and provides an ideal platform to share knowledge and the most recent advances in all areas of applied superconductivity: from large-scale applications to miniature electronics devices, with a traditional focus on advanced materials and conductors. The broad scope is at the same time a challenge and an opportunity to foster novel, inter-disciplinary approaches and promote cross-fertilization among the various fields of applied superconductivity.

  3. PREFACE: 13th International Conference on Electrostatics

    Science.gov (United States)

    Taylor, D. Martin

    2011-06-01

    Electrostatics 2011 was held in the city of Bangor which is located in North West Wales in an area of outstanding natural beauty close to the Snowdonia mountain range and bordering the Irish Sea. The history of the area goes back into the mists of times, but a continuous technological thread can be traced from the stone- and bronze-age craftsmen, who inhabited the area several thousand years ago, via the civil engineering and fortifications of the Romans and Edward I of England, through Marconi's long-wave trans-Atlantic transmitter near Caernarfon to the conference host. The School of Electronic Engineering at Bangor University has contributed much to the discipline of Electrostatics not only in teaching and research but also in supporting industry. It was a great pleasure for me, therefore, to have the pleasure of welcoming the world's experts in Electrostatics to Bangor in April 2011. In my preface to the Proceedings of Electrostatics 1999, I reported that almost 90 papers were presented. Interestingly, a similar number were presented in 2011 testifying to the importance and endurance of the subject. The all-embracing nature of electrostatics is captured in the pictorial depiction used for the conference logo: a hand-held plasma ball with its close link to gaseous discharges and the superimposed Antarctic aurora highlighting the featured conference themes of atmospheric, planetary and environmental electrostatics. Leading these themes were three invited contributions, the first by Giles Harrison who delivered the Bill Bright Memorial Lecture 'Fair weather atmospheric electricity', Carlos Calle on 'The electrostatic environments of Mars and the Moon' and Istvan Berta on 'Lightning protection - challenges, solutions and questionable steps in the 21st century'. Leading other key sessions were invited papers by Atsushi Ohsawa on 'Statistical analysis of fires and explosions attributed to static electricity over the last 50 years in Japanese industry' and Antonio Ramos on 'Electrohydrodynamic pumping in microsystems'. Of the papers submitted for publication 69 passed through the thorough review process and I take this opportunity to warmly thank the reviewers for their constructive criticism and rapid turnaround which has allowed the Proceedings to be delivered to the publisher on time. It is a pleasure also to thank members of the International Advisory Panel, and the Organizing and Programme Committees for their guidance and suggestions and especially Claire Garland and her team at the Institute of Physics for their support, all of which ensured a successful and enjoyable conference. Special thanks are due to Jeremy Smallwood for organising the pre-conference workshop, to Tom Jones, Martin Glor and Dave Swenson for their highly informative and educational contributions at the workshop, to CST for organising the simulation workshop, and to CST and JCI Chilworth for their much appreciated sponsorship of the conference. I am sure you will enjoy reading this record of Electrostatics 2011, covering as it does the wide range of subjects upon which static electricity impinges. Especially important is the development of electrostatic-based methods for reducing atmospheric pollution. In this context it is interesting to see how Masuda's work on the surface-discharge-based Boxer charger, first reported over 30 years ago, has now developed into dielectric barrier discharge (DBD) systems for the removal of noxious molecules from industrial and vehicle exhaust gases. Thanks to our hard working conference chairman, Paul Holdstock, the conference retained its now well-established reputation for providing a friendly, sociable atmosphere for discussing the newest developments in this important scientific area. Finally, my sincere thanks go to all the presenters and to all those who attended and contributed to another successful conference. Professor D. Martin TaylorProceedings EditorBangor, May 2011

  4. 13th Radiochemical Conference. Booklet of Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    The Conference included the following sessions: (i) Opening plenary presentations (6 contributions); (ii) Chemistry of natural radionuclides, discovery of radium and polonium (6 verbal presentations + 5 poster presentations); (iii) Radionuclides in the environment, radioecology (29 + 48); (iv) Activation analysis and other radioanalytical methods (36 + 49); (v) Ionizing radiation in science and technology (12 + 12); (vi) Chemistry of actinide and trans-actinide elements (11 + 14); (vii) Separation methods, speciation (18 + 41); (viii) Production and application of radionuclides (14 + 29); and (ix) Radiochemical problems in nuclear waste management (12 + 22). The majority of verbal presentations has been input to INIS, mostly in the form of the full authors` abstracts. (P.A.)

  5. 13th Radiochemical Conference. Booklet of Abstracts

    International Nuclear Information System (INIS)

    1998-04-01

    The Conference included the following sessions: (i) Opening plenary presentations (6 contributions); (ii) Chemistry of natural radionuclides, discovery of radium and polonium (6 verbal presentations + 5 poster presentations); (iii) Radionuclides in the environment, radioecology (29 + 48); (iv) Activation analysis and other radioanalytical methods (36 + 49); (v) Ionizing radiation in science and technology (12 + 12); (vi) Chemistry of actinide and trans-actinide elements (11 + 14); (vii) Separation methods, speciation (18 + 41); (viii) Production and application of radionuclides (14 + 29); and (ix) Radiochemical problems in nuclear waste management (12 + 22). The majority of verbal presentations has been input to INIS, mostly in the form of the full authors' abstracts. (P.A.)

  6. 13th Australian tunnelling conference. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The theme of the conference was 'Engineering in a changing environment'. Topics covered include Australian tunnelling projects, design and development of ground support, tunnelling, international projects, fire and life safety, mining projects, risk management in tunnelling, and tunnel boring machine tunnelling. Papers of particular interest to the coal industry are: improving roadway development in underground coal mine (G. Lewis and G. Gibson), and polymer-based alternative to steel mesh for coal mine strata reinforcement (C. Lukey and others).

  7. 2008 13th Expeditionary Warfare Conference

    Science.gov (United States)

    2008-10-23

    platforms – Emphasize a mixed fleet approach that spans the “iron triangle” – Integrate MRAP into the fleet mix – Transition to a fleet of tactical...Urban Warfare Mountain Warfare Desert Warfare Jungle Riverine Special Skills Recon LOG CSS ENG MT HS Ord Maint EOD Pers Retrival ...Detection (Specialized Platform FLGPR)Stand-off (60M) Scaleable Neutralization (Area coverage) ABV Delivery Ground Cueing Stand-off (800M) Scaleable

  8. Internal Charging

    Science.gov (United States)

    Minow, Joseph I.

    2014-01-01

    (1) High energy (>100keV) electrons penetrate spacecraft walls and accumulate in dielectrics or isolated conductors; (2) Threat environment is energetic electrons with sufficient flux to charge circuit boards, cable insulation, and ungrounded metal faster than charge can dissipate; (3) Accumulating charge density generates electric fields in excess of material breakdown strenght resulting in electrostatic discharge; and (4) System impact is material damage, discharge currents inside of spacecraft Faraday cage on or near critical circuitry, and RF noise.

  9. Charge preamplifier

    International Nuclear Information System (INIS)

    Chaminade, R.; Passerieux, J.P.

    1961-01-01

    We describe a charge preamplifier having the following properties: - large open loop gain giving both stable gain and large input charge transfer; - stable input grid current with aging and without any adjustment; - fairly fast rise; - nearly optimum noise performance; - industrial material. (authors)

  10. Charge Meter

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 4. Charge Meter: Easy Way to Measure Charge and Capacitance: Some Interesting Electrostatic Experiments. M K Raghavendra V Venkataraman. Classroom Volume 19 Issue 4 April 2014 pp 376-390 ...

  11. Charging machine

    International Nuclear Information System (INIS)

    Medlin, J.B.

    1976-01-01

    A charging machine for loading fuel slugs into the process tubes of a nuclear reactor includes a tubular housing connected to the process tube, a charging trough connected to the other end of the tubular housing, a device for loading the charging trough with a group of fuel slugs, means for equalizing the coolant pressure in the charging trough with the pressure in the process tubes, means for pushing the group of fuel slugs into the process tube and a latch and a seal engaging the last object in the group of fuel slugs to prevent the fuel slugs from being ejected from the process tube when the pusher is removed and to prevent pressure liquid from entering the charging machine. 3 claims, 11 drawing figures

  12. The Letters of Maximos Planudes to Alexios Philanthropenos and Melchisedek Akropolites: the Problems of Source Studies in the Context of the Politico-Military Situation in Byzantium in the Late 13th C.

    Directory of Open Access Journals (Sweden)

    Pavel I. Lysikov

    2017-11-01

    Full Text Available This research work is dedicated to the problem of dating of the Byzantine scholar and monk Maximos Planudes’ letters to the general, pinkernes Alexios Philanthropenos and his companion, monk Melchisedek Akropolites. Our goal is to date these letters on the basis of their content and data from other sources and to reconstruct chronological sequence of their writing. The period of time when Alexios Philanthropenos was in office of dux of Thrakision (1293–1295 during which he conducted some military operations against the Turks of beyliks Germiyan and Menteєe has a special place in the history of the Byzantine-Turkish wars in the early Palaiologan era. At this time the Byzantine state made some of its last successful military efforts in this struggle. By studying this theme the present article makes a contribution to research the Byzantine wars against the Turks and the military art and military organization of the empire in the late 13th century. Following the explicit consideration of some disputed items in dating of Maximos Planudes’ letters to the persons mentioned above (42 letters the author specifies the chronological sequence of their writing and clarifies the stages of the Alexios Philanthropenos’ military activity in Asia Minor. This article also makes a contribution to using of epistolographic data in historical study.

  13. Weaning age in an expanding population: stable carbon and nitrogen isotope analysis of infant feeding practices in the Okhotsk culture (5th-13th centuries AD) in Northern Japan.

    Science.gov (United States)

    Tsutaya, Takumi; Ishida, Hajime; Yoneda, Minoru

    2015-08-01

    The Okhotsk people were sedentary hunter-gatherer-fishers who lived and prospered in Sakhalin, Hokkaido, and the Kurile Islands during the 5th to 13th centuries AD. They expanded rapidly along the northeastern coast of Hokkaido. We reconstructed infant feeding practices of the Moyoro population of the Okhotsk culture in eastern Hokkaido, Japan. Stable isotope ratios in 58 subadult human skeletons were measured. The results suggest that complementary foods with a relatively low carbon isotope ratio were consumed during and after weaning, as observed in ethnographic descriptions of northern human populations such as the Ainu and isotopically suggested in ancient northern hunter-gatherer-fisher populations. Nitrogen isotope ratios of subadults showed that the age at the end of weaning in the Moyoro population was 1.8 (1.4-2.2 in 95% credible interval) years, which is earlier than that in other northern hunter-gatherer-fisher populations. Because weaning age is one of the most important determinants of fertility, a shorter breastfeeding period suggests increased fertility. Furthermore, better nutrition would further promote the population increase, and thus populations of the Okhotsk culture could expand into new regions. These findings are consistent with recent emerging evidence of great contributions of the Okhotsk to the formation of later Ainu populations and culture. © 2015 Wiley Periodicals, Inc.

  14. The Mongol Conquests and Their Reflection in Material Culture of the Peoples of the Middle Volga and Kama Regions (the 13th – early 14th centuries (according to the archaeological data

    Directory of Open Access Journals (Sweden)

    K.A. Rudenko

    2014-12-01

    Full Text Available The article considers the beginning of the Mongol invasion of Europe, a key moment in the history of Europe. Written sources contain little information about these events. Therefore, the main sources are the archaeological materials. Archaeological findings help us to reconstruct the process of the conquest of Volga Bulgaria. It was the first State that the Mongols conquered during the Western campaign. We can find out the nature of the changes in the Bulgar region of the Golden Horde, which occurred during the second half of the 13th century, both by exploring materials of such major Bulgarian cities as Bilyar, Bolghar, Juketau, Iski-Kazan (which became later the Golden Horde urban centers as well as by studying the materials of rural settlements. If the hillforts’ materials indicate both the preservation of pre-Mongol traditions and significant innovations, then the materials of rural settlements are different and very individual. Insufficient research of the Golden Horde settlements does not allow us to make generalizations and detailed analysis. But we can identify a number of leading directions in the different periods of the Golden Horde history on the basis of the excavation of some settlements in the Western Trans-Kama region.

  15. From the local fueros to the Valencia’s Fuero in the Context of the Feudal Society Instauration Process at the 13th Century in the Reign of Valencia

    Directory of Open Access Journals (Sweden)

    Enric GUINOT RODRÍGUEZ

    2018-01-01

    Full Text Available This paper analyzes the process of changing local laws (fueros to a territorial law (fuero in the context of the new kingdom of Valencia created in 1240 by King James I. Following the tradition of Catalonia and Aragon, also in Valencia the crown and nobility initially organized the repopulation based on different local fueros: Sepúlveda, Zaragoza, Daroca, Teruel, Fontana, costum de Lleida or costum/fuero of Valencia. But from 1245, the monarchy drove the territorial law (fuero of Valencia, which has traditionally been interpreted as a political reason for confrontation between Catalan and Aragonese populators. Our study explains how the Fuero of Zaragoza/Aragon was limited during the 13th Century to a few seigneuries, and how widespread the Fuero of Valencia. Thus, the conflict between the nobility of Aragonese origin to the public power (monarchy and citizens began when the first courts of 1261 approved extending the Fuero of Valencia as a territorial law for the new kingdom.

  16. Charge independence and charge symmetry

    Energy Technology Data Exchange (ETDEWEB)

    Miller, G A [Washington Univ., Seattle, WA (United States). Dept. of Physics; van Oers, W T.H. [Manitoba Univ., Winnipeg, MB (Canada). Dept. of Physics; [TRIUMF, Vancouver, BC (Canada)

    1994-09-01

    Charge independence and charge symmetry are approximate symmetries of nature, violated by the perturbing effects of the mass difference between up and down quarks and by electromagnetic interactions. The observations of the symmetry breaking effects in nuclear and particle physics and the implications of those effects are reviewed. (author). 145 refs., 3 tabs., 11 figs.

  17. Charge independence and charge symmetry

    International Nuclear Information System (INIS)

    Miller, G.A.

    1994-09-01

    Charge independence and charge symmetry are approximate symmetries of nature, violated by the perturbing effects of the mass difference between up and down quarks and by electromagnetic interactions. The observations of the symmetry breaking effects in nuclear and particle physics and the implications of those effects are reviewed. (author). 145 refs., 3 tabs., 11 figs

  18. Refueling and density control in the ZT-40M reversed field pinch

    International Nuclear Information System (INIS)

    Wurden, G.A.; Weber, P.G.; Watt, R.G.; Munson, C.P.; Cayton, T.E.; Buechl, K.

    1987-01-01

    The effects of pellet injection and gas puff refueling have been studied in the ZT-40M Reversed Field Pinch. Multiple deuterium pellets (≤ 6 x 10 19 D atoms/pellet) with velocities ranging from 300 to 700 m/sec have been injected into plasmas with n-bar/sub e/ ∼1 to 5 X 10 19 m -3 , I/sub phi/ ∼100 to 250 kA, T/sub e/(0) ∼150 to 300 eV and discharge durations of ≤ 20 msec. Photographs and an array D/sub α/ detectors show substantial deflection of the pellet trajectory in both the poloidal and toroidal planes, due to asymmetric ablation of the pellet by electrons streaming along field lines. To compensate for the poloidal deflection, the injector was moved up +14 cm off-axis, allowing the pellets to curve down to the midplane. In this fashion, central peaking of the pellet density deposition profile can be obtained. Both electron and ion temperatures fall in response to the density rise, such that β/sub θ/(β/sub θ/ identical to n-bar/sub e/(T/sub e/(0) + T/sub i/)/(B/sub θ/(a)) 2 ) remains roughly constant. Energy confinement is momentarily degraded, and typically a decrease in F (F identical to B/sub phi/(a)/(B/sub phi/)) is seen as magnetic energy is converted to plasma energy when the pellet ablates. As a result of pellet injection at I/sub phi/ = 150 kA we observe T/sub e/(0) α n-bar/sub e//sup -.9 +- .1/, while the helicity based resistivity eta/sub k/ transiently varies as n-bar/sub e//sup .7 +- .1/. While the achievement of center-peaked density profiles is possible with pellet injection, gas puffing at rates strong enough to show a 50% increase in n-bar/sub e/ over a period of 10 msec (∼150 torr-litres/sec) leads to hollow density profiles. The refueling requirements for parameters expected in the next generation RFPs (ZTH, RFX) can be extrapolated from these data using modified tokamak pellet ablation codes

  19. An analysis of fast reactor fuel assembly performance taking into account their mechanical interaction in the core and refuelling line capabilities

    International Nuclear Information System (INIS)

    Buksha, Yu.K.; Zabudko, L.M.; Kravchenko, I.N.; Matveenko, L.V.; Meshkov, M.N.

    1984-01-01

    An approach to assessment of fast reactor fuel assembly performance has been considered. A concept of passive restraint of fuel assemblies in a reactor adopted in the USSR is described. Some methods for calculating the interassembly interactions during operation are briefly outlined, some calculated results are presented. A problem of fuel assembly performance during refuelling taking into account the refuelling line capabilities is considered. Some results from fuel assemblies operation experience in the BN-600 reactor are given. (author)

  20. Application of railgun principle to high-velocity hydrogen pellet injection for magnetic fusion reactor refueling: Technical progress report

    International Nuclear Information System (INIS)

    Kim, Kyekyoon.

    1987-12-01

    This paper discusses the use of a railgun accelerator to inject hydrogen pellets into a magnetic fusion reactor for refueling purposes. Specific studies in this paper include: 1.5 mm-diameter two-stage fuseless plasma-arc-driven electromagnetic railgun, construction and testing of a 3.2 mm-diameter two-stage railgun and a theoretical analysis of the behavior of a railgun plasma-arc armature inside a railgun

  1. THE KINETICS OF CONTAMINANTS ACCUMULATION IN THE JET FUEL DURING THE TECHNOLOGICAL PROCESS OF ITS PREPARATION FOR AIRCRAFT REFUELING

    OpenAIRE

    A. A. Brailko

    2017-01-01

    Much attention is payed to the tasks for ensuring domestic and international aircraft safety and regularity, which are multifaceted and complex. One of them is the system of ensuring the quality of aviation fuel for refueling aircraft at airports. A significant influence of the quality, chemical composition and fuel range on the reliability and lifetime of components and parts of the aircraft fuel system was studied in the process of development and experience accumulation of aircraft operati...

  2. THE KINETICS OF CONTAMINANTS ACCUMULATION IN THE JET FUEL DURING THE TECHNOLOGICAL PROCESS OF ITS PREPARATION FOR AIRCRAFT REFUELING

    Directory of Open Access Journals (Sweden)

    A. A. Brailko

    2017-01-01

    Full Text Available Much attention is payed to the tasks for ensuring domestic and international aircraft safety and regularity, which are multifaceted and complex. One of them is the system of ensuring the quality of aviation fuel for refueling aircraft at airports. A significant influence of the quality, chemical composition and fuel range on the reliability and lifetime of components and parts of the aircraft fuel system was studied in the process of development and experience accumulation of aircraft operating, processes of aviation fuel production, as well as during storage, quality control, transportation, refueling preparation and aircraft refueling. Currently, work is being done to study the influence of fuel quality on the units of the technological scheme of fuel-filling complexes, which provide the required cleanliness of the fuel according to the regulations. The article describes the trend level of aviation fuel cleanliness at the stages from receipt to issuance to the refueling station. The evaluation of compliance with existing regulations on the level of jet fuel cleanliness and the efficiency of fuel cleaning facilities is carried out. It is stated that one of the problems of insufficient level of aviation fuel cleaning quality is a violation of the acceptable contamination level of the fuel before the filter. It was found that the disadvantage of the used filter paper is the fiber wash out process. According to this research it was found that while cleaning fuel from mechanical admixtures it is necessary to take into account the technical condition of the filtering element, and proposal was developed for fuel-filling systems to ensure aviation fuel cleanliness in compliance with regulations.

  3. Improvement of availability of PWR nuclear plants through the reduction of the time required for refueling/maintenance outages

    International Nuclear Information System (INIS)

    Mayers, J.B.; Soth, L.G.

    1978-04-01

    The objective of the project, conducted by Commonwealth Research Corporation and Westinghouse Electric Corporation, is to identify improvements in procedures and equipment which will reduce the time required for refueling/maintenance outages at PWR nuclear power plants. The outage of Commonwealth Edison Zion Station Unit 1 in March through May of 1976 was evaluated to identify those items which caused delays and those work activities that offer the potential for significant improvements that could reduce the overall duration of the outage and achieve an improvement in the plant's availability for power production. Modifications in procedures have been developed and were evaluated during one or more outages in 1977. Conceptual designs have been developed for equipment modifications to the refueling system that could reduce the time required for the refueling portion of the outage. The purpose of the interim report is to describe those conceptual designs and to assess their impact upon future outages. Recommendations are included for the implementation of these equipment improvements in a continuation of this program as a demonstration of plant availability benefits that can be realized in PWR nuclear plants already in operation or under construction

  4. Improvement of availability of PWR nuclear plants through the reduction of the time required for refueling/maintenance outages, Phase 1. Final report

    International Nuclear Information System (INIS)

    Thompson, C.A.

    1978-08-01

    The objective of this project is to identify improvements in procedures and equipment which will reduce the time required for refueling/maintenance outages at PWR nuclear power plants. The outage of Commonwealth Edison Zion Station Unit 1 in March through May of 1976 was evaluated to identify those items which caused delays and those work activities that offer the potential for significant improvements toward reducing its overall duration. Thus, the plant's availability for power production would be increased. Revisions in procedures and some equipment modifications were implemented and evaluated during the Zion Unit 2 refueling/maintenance outage beginning in January 1977. Analysis of the observed data has identified benefits available through improved refueling equipment and also areas where additional new, innovative refueling, or refueling-related equipment should be beneficial. A number of specific design concepts are recommended as a result of Phase 1. In addition, a new master planning mechanism is described for implementation during subsequent planned outages at Zion Station. This final report describes the recommended conceptual designs and planning mechanism and assesses their impact upon future outages. Their effect on savings in refueling time, labor, and radiation exposure is discussed. The estimated economic payoff for these concepts was found to be of such significance that an additional phase of the program is warranted. During this extended phase, a more detailed engineering study should be undertaken to determine the cost of implementation along with more specific estimates of the benefits for PWR plants already in operation or under construction

  5. 13th February 2012 - German CEO Barmenia Insurance Group and Chair of the Hochschulrat Board of Governors of the Bergische Universitaet Wuppertal J. Beutelmann visiting ATLAS experimental area and signing the guest book with CERN Director-General R. Heuer and Advise R. Voss.

    CERN Multimedia

    Maximilien Brice

    2012-01-01

    13th February 2012 - German CEO Barmenia Insurance Group and Chair of the Hochschulrat Board of Governors of the Bergische Universitaet Wuppertal J. Beutelmann visiting ATLAS experimental area and signing the guest book with CERN Director-General R. Heuer and Advise R. Voss.

  6. The valuation key day in legal expropriation according to the Atomic Energy Act. On the transferability of the legal compensation fundamentals of the so called progression legislation on the 13th AtG amendment; Der Bewertungsstichtag bei der atomrechtlichen Legalenteignung. Zur Uebertragbarkeit der entschaedigungsrechtlichen Grundsaetze der sogenannten 'Steigerungsrechtsprechung' auf die 13. AtG-Novelle

    Energy Technology Data Exchange (ETDEWEB)

    Cornils, Matthias

    2015-07-01

    Under the - constitutionally based - regime ruling compensation for expropriated property notably the valuation key day is of crucial importance for the level of compensation. The study examines the therefor acknowledged principles and criteria, their constitutional foundation, their applicability on expropriation measures directly performed by an Act of Parliament, finally their transferability to the 13th amendment to the Atomic Energy Act.

  7. Key Issues for the control of refueling outage duration and costs in PWR Nuclear Power Plants

    International Nuclear Information System (INIS)

    Degrave, Claude

    2002-01-01

    For several years, EDF, within the framework of the CIDEM1 project and in collaboration with some German Utilities, has undertaken a detailed review of the operating experience both of its own NPP and of foreign units, in order to improve the performances of future units under design, particularly the French-German European Pressurized Reactor (EPR) project. This review made it possible to identify the key issues allowing to decrease the duration of refueling and maintenance outages. These key issues can be classified in 3 categories Design, Maintenance and Logistic Support, Outage Management. Most of the key issues in the design field and some in the logistic support field have been studied and could be integrated into the design of any future PWR unit, as for the EPR project. Some of them could also be adapted to current plants, provided they are feasible and profitable. The organization must be tailored to each country, utility or period: it widely depends on the power production environment, particularly in a deregulation context. (author)

  8. Key issues for the control of refueling outage duration and costs in PWR nuclear power plants

    International Nuclear Information System (INIS)

    Degrave, C.; Martin-Onraet, M.

    2000-01-01

    For several years, EDF, within the framework of the CIDEM project and in collaboration with some German Utilities, has undertaken a detailed review of the operating experience both of its own NPP and of foreign units, in order to improve the performances of future units under design, particularly the French-German European Pressurized Reactor (EPR) project. This review made it possible to identify the key issues allowing to decrease the duration of refueling and maintenance outages. These key issues can be classified in 3 categories: Design; Maintenance and Logistic Support; Outage Management. Most key issues in the design field and some in the logistic support field have been studied and could be integrated into the design of any future PWR unit, as for the EPR project. Some of them could also be adapted to current plants, provided they are feasible and profitable. The organization must be tailored to each country, utility or period: it widely depends on the power production environment, particularly in a deregulation context. (author)

  9. A guidance law for UAV autonomous aerial refueling based on the iterative computation method

    Directory of Open Access Journals (Sweden)

    Luo Delin

    2014-08-01

    Full Text Available The rendezvous and formation problem is a significant part for the unmanned aerial vehicle (UAV autonomous aerial refueling (AAR technique. It can be divided into two major phases: the long-range guidance phase and the formation phase. In this paper, an iterative computation guidance law (ICGL is proposed to compute a series of state variables to get the solution of a control variable for a UAV conducting rendezvous with a tanker in AAR. The proposed method can make the control variable converge to zero when the tanker and the UAV receiver come to a formation flight eventually. For the long-range guidance phase, the ICGL divides it into two sub-phases: the correction sub-phase and the guidance sub-phase. The two sub-phases share the same iterative process. As for the formation phase, a velocity coordinate system is created by which control accelerations are designed to make the speed of the UAV consistent with that of the tanker. The simulation results demonstrate that the proposed ICGL is effective and robust against wind disturbance.

  10. Drogue pose estimation for unmanned aerial vehicle autonomous aerial refueling system based on infrared vision sensor

    Science.gov (United States)

    Chen, Shanjun; Duan, Haibin; Deng, Yimin; Li, Cong; Zhao, Guozhi; Xu, Yan

    2017-12-01

    Autonomous aerial refueling is a significant technology that can significantly extend the endurance of unmanned aerial vehicles. A reliable method that can accurately estimate the position and attitude of the probe relative to the drogue is the key to such a capability. A drogue pose estimation method based on infrared vision sensor is introduced with the general goal of yielding an accurate and reliable drogue state estimate. First, by employing direct least squares ellipse fitting and convex hull in OpenCV, a feature point matching and interference point elimination method is proposed. In addition, considering the conditions that some infrared LEDs are damaged or occluded, a missing point estimation method based on perspective transformation and affine transformation is designed. Finally, an accurate and robust pose estimation algorithm improved by the runner-root algorithm is proposed. The feasibility of the designed visual measurement system is demonstrated by flight test, and the results indicate that our proposed method enables precise and reliable pose estimation of the probe relative to the drogue, even in some poor conditions.

  11. Dual winch nuclear fuel transfer system providing more reliable fuel transfer during refueling operations

    International Nuclear Information System (INIS)

    Meuschke, R.E.; Harper, M.J.; Stefko, D.J.

    1991-01-01

    This paper describes a nuclear power plant having an auxiliary building, a containment building having the wall, a track extending through a transfer tube within the containment wall, and a fuel transfer system for moving fuel assemblies along the track between the auxiliary building side and the containment building side of the containment wall. It comprises: a car having wheels for movement along spaced rails of the track and further having a carrying basket for one or more fuel assemblies; winch means located on the auxiliary building side of the containment wall and above the water level existing over the track during refueling operations to drive the car along the track; first cable means and second cable means extending substantially vertically downward from the winch means to the tack level; first sheave means for directing the first and the second cable means substantially in the horizontal direction along the track; means for securing the first cable means to the car so that winch pulling force on the first cable means drives the car away from the containment building; second sheave means located near the containment end of the transfer tube

  12. HyApproval - Handbook for the approval of hydrogen refuelling stations - First preliminary achievements

    Energy Technology Data Exchange (ETDEWEB)

    Wurster, R.; Vandendungen, G.; Guichard, J.; Molag, M.; Barron, J.; Reijalt, M.; Hill, H.J.; Landinger, H.

    2007-05-15

    The EU-funded project HyApproval [www.hyapproval.org] aims at developing a universal Handbook to facilitate the approval process of Hydrogen Refuelling Stations (HRS) in Europe. The main goal of the HyApproval partnership with 22 partners from Europe and one each from China, Japan and the USA is to provide a Handbook of technical and regulatory requirements to assist authorisation officials, companies and organisations in the safe implementation and operation of HRS. Achievements during the first 15 months: analyses of HRS technology concepts and of equipment and safety distances/ Intermediate Design Paper/ Regulations, Codes and Standards (RCS) review and comparison/ first Handbook draft and first review sessions with HySafe experts/ safety matrix/ identification of accident scenarios/ agreement on safety documentation/ critical review of reliability data from collections and risk studies/ risk assessment (RA) criteria definition and RA/ matrix of acceptability and awareness levels/ database of Fire Associations and First Responders/ calendar of hydrogen events/ general description of CGH{sub 2} interfaces. (au)

  13. Scaling and Parametric Studies of Condensation Oscillation in an In-Containment Refueling Water Storage Tank

    International Nuclear Information System (INIS)

    Lee, Jun Hyung; No, Hee Cheon

    2003-01-01

    The purpose of this paper is to study the condensation oscillation phenomena by steam-jetting into subcooled water through a multihole sparger, implementing a scaling methodology and the similarity correlation between the test facility and model prototype. To corroborate the scaling methodology, various experimental tests were conducted. The thickness of the boundary layer that encloses the steam cavity was found to be equal to the maximum length of the steam cavity formed. Three key scaling parameters were identified and correlated with the maximum amplitude of pressure oscillation: flow restriction coefficient, area ratio of discharge hole to steam cavity, and density ratio of water to steam. Variations of the oscillation amplitude were small when steam-jetting directions were altered. The concept of a reduction factor was introduced for estimating the oscillation amplitude of the multihole sparger with test data from a single-hole sparger. The results of this study can provide suitable guidelines for sparger design utilized in the in-containment refueling water storage tank for the Advanced Power Reactor 1400

  14. Pellet acceleration studies relating to the refuelling of a steady-state fusion reactor

    International Nuclear Information System (INIS)

    Dimock, D.; Jensen, K.; Jensen, V.O.; Joergensen, L.W.; Pecseli, H.L.; Soerensen, H.; Oester, F.

    1975-11-01

    Several methods for refuelling a steady state-fusion reactor have been proposed, and the pellet method seems advantageous if the pellet can be accelerated to the necessary velocity. A study group was formed to analyze this acceleration problem. Two pellet velocity values were considered: 10 4 m/s and 300 m/s. A pellet velocity of 10 4 m/s may be suitable in the case of a reactor, whereas 300 m/s is believed to be a reasonable velocity at which to perform realistic ablation experiments in the near future. A pneumatic acceleration method was found promising. The pressure is either supplied separately or by evaporation of a part of the pellet. In the latter case, a spark behind the pellet should provide the evoporation and the necessary heating of the driving gas. A preliminary test at room temperature with pellets made of beeswax (the density being ten times that of solid hydrogen, and plastic properties similar to those of solid hydrogen) resulted in a pellet velocity of 100 m/s at a modest value of the energy supplied to the spark. (Auth.)

  15. Finite element modelling of different CANDU fuel bundle types in various refuelling conditions

    International Nuclear Information System (INIS)

    Roman, M. R.; Ionescu, D. V.; Olteanu, G.; Florea, S.; Radut, A. C.

    2016-01-01

    The objective of this paper is to develop a finite element model for static strength analysis of the CANDU standard with 37 elements fuel bundle and the SEU43 with 43 elements fuel bundle design for various refuelling conditions. The computer code, ANSYS7.1, is used to simulate the axial compression in CANDU type fuel bundles subject to hydraulic drag loads, deflection of fuel elements, stresses and displacements in the end plates. Two possible situations for the fuelling machine side stops are considered in our analyses, as follows: the last fuel bundle is supported by the two side stops and a side stop can be blocked therefore, the last fuel bundle is supported by only one side stop. The results of the analyses performed are briefly presented and also illustrated in a graphical form. The finite element model developed in present study is verified against test results for endplate displacement and element bowing obtained from strength tests with fuel bundle string and fuelling machine side-stop simulators. Comparison of ANSYS model predictions with these experimental results led to a very good agreement. Despite the difference in hydraulic load between SEU43 and CANDU standard fuel bundles strings, the maximum stress in the SEU43 endplate is about the same with the maximum stress in the CANDU standard endplate. The comparative assessment reveals that SEU43 fuel bundle is able to withstand high flow rate without showing a significant geometric instability. (authors)

  16. Technologies in deep and ultra-deep well drilling: Present status, challenges and future trend in the 13th Five-Year Plan period (2016–2020

    Directory of Open Access Journals (Sweden)

    Haige Wang

    2017-09-01

    Full Text Available During the 12th Five-Year Plan period (2011–2015, CNPC independently developed a series of new drilling equipment, tools and chemical materials for deep and ultra-deep wells, including six packages of key drilling equipment: rigs for wells up to 8000 m deep, quadruple-joint-stand rigs, automatic pipe handling devices for rigs for wells being 5000/7000 m deep, managed pressure drilling systems & equipment, gas/fuel alternative combustion engine units, and air/gas/underbalanced drilling systems; seven sets of key drilling tools: automatic vertical well drilling tools, downhole turbine tools, high-performance PDC bits, hybrid bits, bit jet pulsation devices, no-drilling-surprise monitoring system, & casing running devices for top drive; and five kinds of drilling fluids and cementing slurries: high temperature and high density water-based drilling fluids, oil-based drilling fluids, high temperature and large temperature difference cementing slurry, and ductile cement slurry system. These new development technologies have played an important role in supporting China's oil and gas exploration and development business. During the following 13th Five-Year Plan period (2016–2020, there are still many challenges to the drilling of deep and ultra-deep wells, such as high temperatures, high pressures, narrow pressure window, wellbore integrity and so on, as well as the enormous pressure on cost reduction and efficiency improvement. Therefore, the future development trend will be focused on the development of efficient and mobile rigs, high-performance drill bits and auxiliary tools, techniques for wellbore integrity and downhole broadband telemetry, etc. In conclusion, this study will help improve the ability and level of drilling ultra-deep wells and provide support for oil and gas exploration and development services in China. Keywords: Deep well, Ultra-deep well, Drilling techniques, Progress, Challenge, Strategy, CNPC

  17. Future combustion technology for synthetic and renewable fuels in compression ignition engines (REFUEL). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Aakko-Saksa, P.; Brink, A.; Happonen, M. [and others

    2012-07-01

    This domestic project, Future Combustion Technology for Synthetic and Renewable Fuels in Compression Ignition Engines (ReFuel), was part of a Collaborative Task 'Future Combustion Technology for Synthetic and Renewable Fuels in Transport' of International Energy Agency (IEA) Combustion Agreement. This international Collaborative Task is coordinated by Finland. The three-year (2009-2011) prooject was a joint research project with Aalto University (Aalto), Tampere University of Technology (TUT), Technical Research Centre of Finland (VTT) and Aabo Akademi University (AAU). The project was funded by TEKES, Waertsilae Oyj, Agro Sisu Power, Aker Arctic Technology Oy and the research partners listed above. Modern renewable diesel fuels have excellent physical and chemical properties, in comparison to traditional crude oil based fuels. Purely paraffinic fuels do not contain aromatic compounds and they are totally sulphur free. Hydrotreated Vegetable Oil (HVO) was studied as an example of paraffinic high cetane number (CN) diesel fuels. HVO has no storage and low temperature problems like the fatty acid methyl esters (FAMEs) have. The combustion properties are better than those of crude oil based fuels and FAME, because they have very high cetane numbers and contain no polyaromatic hydrocarbons (PAH). With low HVO density, viscosity and distillation temperatures, these advantageous properties allow far more advanced combustion strategies, such as very high exhaust gas recirculation (EGR) rates or extreme Miller timings, than has been possible with current fossil fuels. The implementation of these advanced combustion technologies, together with the novel renewable diesel fuel, brought significant nitrogen oxides (NO{sub x}), particulate matter (PM) emission reductions with no efficiency losses. (orig.)

  18. Alcohol-fueled vehicles: An alternative fuels vehicle, emissions, and refueling infrastructure technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, G.A.; Kerstetter, J.; Lyons, J.K. [and others

    1993-06-01

    Interest in alternative motor vehicle fuels has grown tremendously over the last few years. The 1990 Clean Air Act Amendments, the National Energy Policy Act of 1992 and the California Clean Air Act are primarily responsible for this resurgence and have spurred both the motor fuels and vehicle manufacturing industries into action. For the first time, all three U.S. auto manufacturers are offering alternative fuel vehicles to the motoring public. At the same time, a small but growing alternative fuels refueling infrastructure is beginning to develop across the country. Although the recent growth in alternative motor fuels use is impressive, their market niche is still being defined. Environmental regulations, a key driver behind alternative fuel use, is forcing both car makers and the petroleum industry to clean up their products. As a result, alternative fuels no longer have a lock on the clean air market and will have to compete with conventional vehicles in meeting stringent future vehicle emission standards. The development of cleaner burning gasoline powered vehicles has signaled a shift in the marketing of alternative fuels. While they will continue to play a major part in the clean vehicle market, alternative fuels are increasingly recognized as a means to reduce oil imports. This new role is clearly defined in the National Energy Policy Act of 1992. The Act identifies alternative fuels as a key strategy for reducing imports of foreign oil and mandates their use for federal and state fleets, while reserving the right to require private and municipal fleet use as well.

  19. H2moves.eu Scandinavia. ''Experience from operating a 70 MPa hydrogen refuelling station in Oslo''. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sloth, M.

    2013-02-15

    As part of the H2MOVES Scandinavia project H2 Logic were to construct a large scale hydrogen refuelling station (HRS) in Oslo providing hydrogen for FCEV's from Daimler and Hyundai in the project. The effort has provided extensive results and lessons learned across the entire process from site selection, HRS design and manufacturing to the final installation and operation. An extensive site screening of more than 30 sites in Oslo was firstly conducted to identify the most optimal location for the HRS. A suitable site was identified at the research organisation SINTEF in Gaustad in the western part of Oslo. The location was strategically well located with regards to the other HRS's in the city ensuring good refuelling coverage in Oslo. The HRS was manufactured, installed and operated by H2 Logic based on the company's H2Station technology. The HRS provides 70MPa refuelling in accordance with the SAE J2601, and operation results have confirmed refuelling times consistently below four minutes for a full tank. The HRS includes onsite electrolysis production providing a 20kg/day base load supply, with potentially additional trucking-in of hydrogen up to a total capacity of 200kg/day. The installation of the HRS took in total 10 days, from arrival at site, until first refuelling was conducted. This included local inspection by third parties and authorities as well as several days of hydrogen production and compression to reach the necessary refuelling pressure. Before opening a refuelling recommendation process was successfully conducted by Daimler. The HRS opened on 21st November 2011 and has been operated for 13,5 months during the remainder project period (ending December 2012). The HRS is expected to continue operation beyond the project. Below are shown the major operation results from the HRS during the project: 1) 701 kg dispensed; 2) 313 refueling's conducted; 3) Average availability of 97% during first half of 2012; 4) 53% of all down

  20. Ristripatsid Eesti 12.–13. sajandi laibakalmistutes: kas ehted või usu tunnused? / The cross-shaped pendants of inhumation burials in 12th-13th century Estonia: adornments or signs of belief?

    Directory of Open Access Journals (Sweden)

    Tuuli Kurisoo

    2012-01-01

    Full Text Available Cross-shaped pendants are one of the most discussed symbolically laden artefacts among Estonian archaeological material. The beginning of the distribution of cross-shaped pendants dates back to 11th century when the artefacts, though scarce, appear. The number of such pendants increases noticeably at the very end of the Iron Age. Due to the ambiguous entity of cross and time context, cross-pendants have been interpreted either as symbols of Christian faith, as pieces of adornment not affiliated with Christianity, or as objects with magical qualities. In this paper I study pendants found in the inhumation cemeteries of Estonia. Only those provide us with an archaeological context which shows precisely who could have worn them and how. The analyzed cross-pendants were found at Pada, Kaberla, Kukruse, Haimre and Tammiku cemeteries and from the early burials in Viru-Nigula churchyard. As artefacts, the cross pendants are more or less stylized Greek crosses. In most cases the pendants were either used as a part of jewellery or worn singularly around the neck area. From the total of 48 analyzed cross-pendants one fourth could be interpreted as locally produced items. Of local origin are probably lead pendants from Pada cemetery, heads of decorative pins worn as cross-shaped pendants from Viru-Nigula and Kaberla cemeteries, and obvious scrap and unfinished pendant crosses. In addition, I would like to draw attention that cross-pendants from inhumation burials do not contain many widespread forms, such as ‘Scandinavian’ and some other widespread Russian origin types, which have been found in hoards, from hill-forts and cremation burials. This observation could confirm that cross pendants from 12th–13th century inhumation burials were communally recognized and some of them were locally manufactured. As the next stage of my investigation I studied different occurrence contexts of cross pendants in cemeteries and burials: the location of burials with

  1. Fuel management for off-load annual refuelling of the D-HHT 600 MW(e) reference core

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, U

    1973-03-16

    The reference design for the Dragon-HHT reactor has been optimised for on-load continuous refuelling. The possiblity to operate the reactor on a discontinuous annual reloading schedule might prove of interest and/or necessity. In this paper the influence of an annual 4-batch fuel management scheme on the core physics and fuel cycle economics is investigated. The results of the present investigation give a good indication of the relative merits of the two fuel management schemes. Although a broader parameter survey and a more detailed scrutinising of special cases would be desirable, we feel that the main conclusions are correct and that the principle differences have been elicited.

  2. A contribution to severe accident monitoring: Level measurement of the Incontainment Refueling Water Storage Tank (IRWST), design and qualification

    Energy Technology Data Exchange (ETDEWEB)

    Schumilov, A.; Weber, P.; Esteves, S.

    2012-07-01

    A level measurement sensor for monitoring the water level in the in-containment refueling water storage tank (IRWST) of the EPRTM (generation 3+ pressurized water reactor) during leakage and severe accidents has been developed by AREVA. The development has been accompanied by many functional and material analyses as well as tests to assure the resistivity under extreme conditions, such as high irradiation dose of 5 MGy, increased temperature up to 160 degree centigrade in conjunction with saturated steam conditions. Moreover, the sensor has been designed and experimentally verified to resist the impact of seismic events and airplane crashes as well.

  3. Detailed description of an SSAC at the facility level for on-load refueled power reactor facilities

    International Nuclear Information System (INIS)

    Jones, R.J.

    1985-11-01

    The purpose of this document is to provide a detailed description of a system for the accounting for and control of nuclear material in an on-load refueled power reactor facility which can be used by a facility operator to establish his own system to comply with a national system for nuclear material accounting and control and to facilitate application of IAEA safeguards. The scope of this document is limited to descriptions of the following SSAC elements: (1) Nuclear Material Measurements; (2) Measurement Quality; (3) Records and Reports; (4) Physical Inventory Taking; (5) Material Balance Closing

  4. Core and Refueling Design Studies for the Advanced High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Ilas, Dan [ORNL; Varma, Venugopal Koikal [ORNL; Cisneros, Anselmo T [ORNL; Kelly, Ryan P [ORNL; Gehin, Jess C [ORNL

    2011-09-01

    The Advanced High Temperature Reactor (AHTR) is a design concept for a central generating station type [3400 MW(t)] fluoride-salt-cooled high-temperature reactor (FHR). The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. This report presents the current status of ongoing design studies of the core, in-vessel structures, and refueling options for the AHTR. The AHTR design remains at the notional level of maturity as important material, structural, neutronic, and hydraulic issues remain to be addressed. The present design space exploration, however, indicates that reasonable options exist for the AHTR core, primary heat transport path, and fuel cycle provided that materials and systems technologies develop as anticipated. An illustration of the current AHTR core, reactor vessel, and nearby structures is shown in Fig. ES1. The AHTR core design concept is based upon 252 hexagonal, plate fuel assemblies configured to form a roughly cylindrical core. The core has a fueled height of 5.5 m with 25 cm of reflector above and below the core. The fuel assembly hexagons are {approx}45 cm across the flats. Each fuel assembly contains 18 plates that are 23.9 cm wide and 2.55 cm thick. The reactor vessel has an exterior diameter of 10.48 m and a height of 17.7 m. A row of replaceable graphite reflector prismatic blocks surrounds the core radially. A more complete reactor configuration description is provided in Section 2 of this report. The AHTR core design space exploration was performed under a set of constraints. Only low enrichment (<20%) uranium fuel was considered. The coated particle fuel and matrix materials were derived from those being developed and demonstrated under the Department of Energy Office of Nuclear Energy (DOE-NE) advanced gas reactor program. The coated particle volumetric packing fraction was restricted to at most 40%. The pressure

  5. Do Lessons in Nature Boost Subsequent Classroom Engagement? Refueling Students in Flight

    Directory of Open Access Journals (Sweden)

    Ming Kuo

    2018-01-01

    afterward, lessons in nature may actually leave students more able to engage in the next lesson, even as students are also learning the material at hand. Such “refueling in flight” argues for including more lessons in nature in formal education.

  6. 煤炭工业“十三五”节能环保发展思路%Development thinking of energy conservation and environment protection of coal industry in the 13th Five-year plan

    Institute of Scientific and Technical Information of China (English)

    吴晓华

    2017-01-01

    In order to accelerate the clean,efficient and low carbon utilization of coal,the development strategy of energy conservation,environmental protection and key tasks were proposed in this paper after analyzing the situation of energy conservation and environmental protection of coal industry in domestic and aboard based on the coal mine practice.During the period of 13th Five-Year plan,under the guidance of innovation,coordination,green development,opening and sharing policy,the coal industry should implement green,cyclic and low carbon development.Six points are put forward to promote the development of coal industry in this paper,as efficient development by technological innovation and meticulous management,clean development by clean energy alternation,green development by total pollutant emission control,cyclic development by comprehensive utilization of waste resources,low carbon development by comprehensive utilization of low concentration gas,strengthening ecological restoration,management and developing the mining tourism.The priority works are prompting the industrialization of mine water,the comprehensive utilization of solid waste and coal mine gas,strengthening the ecological environment management and restoration,and constructing low carbon development system in mining area.%为推进煤炭清洁高效低碳利用,通过分析国内外煤炭节能环保发展形势,立足煤矿实践,提出我国“十三五”期间煤炭工业节能环保发展思路和重点工作.“十三五”期间煤炭行业应秉承“创新、协调、绿色、开放、共享”的发展理念,推进绿色发展、循环发展、低碳发展,从源头实现煤炭的清洁高效利用.节能环保发展思路主要围绕6个方面,包括坚持高效发展,推进“技术创新+精细化管理”;坚持清洁发展,推行清洁能源替代;坚持绿色发展,控制污染物排放总量;坚持循环发展,提高废弃资源综合利用率;坚持低碳发展,推进低浓度瓦斯

  7. Clear cutting (10-13th century) and deep stable economy (18-19th century) as responsible interventions for sand drifting and plaggic deposition in cultural landscapes on aeolian sands (SE-Netherlands).

    Science.gov (United States)

    van Mourik, Jan; Vera, Hein; Wallinga, Jakob

    2013-04-01

    The landscape in extensive areas in SE-Netherlands is underlain by coversand, deposited during the Late Glacial of the Weichselian. In the Preboreal, aeolian processes reduced soil formation. From the Preboreal to the Atlantic a deciduous climax forest developed. The geomorphology was a coversand landscape, composed of ridges (umbric podzols), coversand plains (gleyic podzols), coversand depressions (histic podzols) and small valleys (gleysols). The area was used by hunting people during the Late Paleolithic and Mesolithic. During the Bronze and Iron Ages the area was populated by people, living from forest grazing, shifting cultivation and trade. The natural deciduous forest gradually degraded into Calluna heath. The deforestation accelerated the soil acidification and affected the hydrology, which is reflected in drying out of ridges and wetting of depressions, promoting the development of histic podzols and even histosols. Aeolian erosion was during this period restricted to local, small scale sand drifting, related to natural hazards as forest fires and hurricanes and shifting cultivation. Sustainable crop productivity on chemically poor sandy substrates required application of organic fertilizers, composed of a mixture of organic litter and animal manure with a very low mineral compound, produced in shallow stables. At least since 1000 AD, heath management was regulated by a series of rules that aimed to protect the valuable heat lands against degradation. During the 11th, 12th and 13th centuries there was an increasing demand for wood and clear cutting transformed the majority of the forests in driftsand landscapes. The most important market was formed by the very wealthy Flemish cities. The exposed soil surface was subjected to wind erosion and sand drifting which endangered the Calluna heath, arable land and even farmhouses. As a consequence, umbric podzols, the natural climax soil under deciduous forests on coversand, degraded into larger scale driftsand

  8. Net charge fluctuations and local charge compensation

    International Nuclear Information System (INIS)

    Fu Jinghua

    2006-01-01

    We propose net charge fluctuation as a measure of local charge correlation length. It is demonstrated that, in terms of a schematic multiperipheral model, net charge fluctuation satisfies the same Quigg-Thomas relation as satisfied by charge transfer fluctuation. Net charge fluctuations measured in finite rapidity windows depend on both the local charge correlation length and the size of the observation window. When the observation window is larger than the local charge correlation length, the net charge fluctuation only depends on the local charge correlation length, while forward-backward charge fluctuations always have strong dependence on the observation window size. Net charge fluctuations and forward-backward charge fluctuations measured in the present heavy ion experiments show characteristic features similar to those from multiperipheral models. But the data cannot all be understood within this simple model

  9. Autonomous Aerial Refueling Ground Test Demonstration—A Sensor-in-the-Loop, Non-Tracking Method

    Directory of Open Access Journals (Sweden)

    Chao-I Chen

    2015-05-01

    Full Text Available An essential capability for an unmanned aerial vehicle (UAV to extend its airborne duration without increasing the size of the aircraft is called the autonomous aerial refueling (AAR. This paper proposes a sensor-in-the-loop, non-tracking method for probe-and-drogue style autonomous aerial refueling tasks by combining sensitivity adjustments of a 3D Flash LIDAR camera with computer vision based image-processing techniques. The method overcomes the inherit ambiguity issues when reconstructing 3D information from traditional 2D images by taking advantage of ready to use 3D point cloud data from the camera, followed by well-established computer vision techniques. These techniques include curve fitting algorithms and outlier removal with the random sample consensus (RANSAC algorithm to reliably estimate the drogue center in 3D space, as well as to establish the relative position between the probe and the drogue. To demonstrate the feasibility of the proposed method on a real system, a ground navigation robot was designed and fabricated. Results presented in the paper show that using images acquired from a 3D Flash LIDAR camera as real time visual feedback, the ground robot is able to track a moving simulated drogue and continuously narrow the gap between the robot and the target autonomously.

  10. Status of innovative small and medium sized reactor designs 2005. Reactors with conventional refuelling schemes

    International Nuclear Information System (INIS)

    2006-03-01

    research and development (R and D) programmes in Member States, and non-technical factors and arrangements that could facilitate successful development and deployment of innovative reactors within the small-to-medium power range. The annexes, intended mostly for designers and technical managers, provide detailed design descriptions of innovative SMRs under development worldwide and are patterned along a newly developed common format, which makes it possible to identify the design philosophy, objectives and approaches, as well as technical features and non-technical factors and arrangements with a potential to provide solutions in the specific areas of concern associated with future nuclear energy systems. Detailed design descriptions in this report were prepared firsthand by the designers and reviewed, updated and approved for publication by the respective vendors, research and design organizations and academic institutions in Member States. The scope of this report is limited to reactors with conventional, proven in operation refuelling schemes and does not include small reactors that could operate without reloading and shuffling of fuel for a long period, from 10 years and more, with no fresh or spent fuel being stored at the site during reactor operation. Because of a large number of inputs, such reactors would require a separate dedicated publication

  11. El cuerpo como materia educativa en la prosa castellana de los siglos 13 y 14 - The body as educational content in late medieval spanish prose: 13th and 14th centuries

    Directory of Open Access Journals (Sweden)

    Miguel Vicente Pedraz, España

    2012-07-01

    Full Text Available O CORPO COMO CONTEÚDO DA EDUCAÇÃO EM PROSA ESPANHOLA DOS SÉCULOS 13 E 14 ResumoO artigo propõe a seguinte hipótese: a gênese medieval da educação física remete, sobretudo, à emergência da sensibilidade cortesã, manifestada na aparência distinguida e no autodomínio gestual. A partir dessa perspectiva, as destrezas corporais próprias da atividade bélica ou da prática lúdica cavalheiresca constituem um aspecto de menor relevância; somente uma expressão dessa sensibilidade, uma vez que o fundamental é que manifesta o relativo declínio da idéia de estirpe e dos atributos do sangue como dispositivso determinantes da excelência, processo que abriria espaço a um crescente interesse educativo pela instrução do corpo para além do exercício ou do mero endurecimento físico. A partir da perspectiva de Norbert Elias, exposta em O processo civilizatório, se mostram alguns exemplos literários da pujança dessa nova sensibilidade na literatura castelhana da baixa Idade Média.Palvras-chave: educação do príncipe, corpo, cortesía, literatura medieval castelhana.  THE BODY AS EDUCATIONAL CONTENT IN LATE MEDIEVAL SPANISH PROSE: 13TH AND 14TH CENTURIES AbstractThis paper advances the following hypothesis: physical education in the Middle Ages originates mainly in the emergence of a new sensibility, exhibited in control of gestures, posture and speech. Thus, the physical strength and bodily skills required of a knight in order to face combat represent an expression, among many others, of this new chivalrous sensibility, which would eventually lead to the decline of the concepts of lineage and blood as supreme marks of nobility and excellence, as well as to a growing educational interest in the instruction of the body, beyond mere physical exercise and training. Following the theory proposed by Norbert Elias in his Process of civilization, this paper aims to offer a selection of literary examples of this new sensibility

  12. CHARGE Association

    Directory of Open Access Journals (Sweden)

    Semanti Chakraborty

    2012-01-01

    Full Text Available We present here a case of 17-year-old boy from Kolkata presenting with obesity, bilateral gynecomastia, mental retardation, and hypogonadotrophic hypogonadism. The patient weighed 70 kg and was of 153 cm height. Facial asymmetry (unilateral facial palsy, gynecomastia, decreased pubic and axillary hair, small penis, decreased right testicular volume, non-palpable left testis, and right-sided congenital inguinal hernia was present. The patient also had disc coloboma, convergent squint, microcornea, microphthalmia, pseudohypertelorism, low set ears, short neck, and choanalatresia. He had h/o VSD repaired with patch. Laboratory examination revealed haemoglobin 9.9 mg/dl, urea 24 mg/dl, creatinine 0.68 mg/dl. IGF1 77.80 ng/ml (decreased for age, GH <0.05 ng/ml, testosterone 0.25 ng/ml, FSH-0.95 ΅IU/ml, LH 0.60 ΅IU/ml. ACTH, 8:00 A.M cortisol, FT3, FT4, TSH, estradiol, DHEA-S, lipid profile, and LFT was within normal limits. Prolactin was elevated at 38.50 ng/ml. The patient′s karyotype was 46XY. Echocardiography revealed ventricularseptal defect closed with patch, grade 1 aortic regurgitation, and ejection fraction 67%. Ultrasound testis showed small right testis within scrotal sac and undescended left testis within left inguinal canal. CT scan paranasal sinuses revealed choanalatresia and deviation of nasal septum to the right. Sonomammography revealed bilateral proliferation of fibroglandular elements predominantly in subareoalar region of breasts. MRI of brain and pituitary region revealed markedly atrophic pituitary gland parenchyma with preserved infundibulum and hypothalamus and widened suprasellar cistern. The CHARGE association is an increasingly recognized non-random pattern of congenital anomalies comprising of coloboma, heart defect, choanal atresia, retarded growth and development, genital hypoplasia, ear abnormalities, and/or deafness. [1] These anomalies have a higher probability of occurring together. In this report, we have

  13. Rapid changes in the size of different functional organ and muscle groups during refueling in a long-distance migrating shorebird

    NARCIS (Netherlands)

    Piersma, T; Gudmundsson, GA; Lilliendahl, K; Gudmundsson, Gudmundur A.

    1999-01-01

    The adaptive value of size changes in different organ and muscle groups was studied in red knots (Calidris canutus islandica) in relation to their migration. Birds were sampled on five occasions: at arrival in Iceland in May 1994, two times during subsequent refueling, at departure toward, and on

  14. Report on the second consultants' meeting of nuclear reaction data centers Kiev, USSR, 11-16 April 1977. Including the thirteenth four-center meeting and the third meeting on charged particle nuclear data compilation

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1977-10-01

    This second ''NRDC meeting'' combined the 13th ''four centers meeting'' (consultants' meeting of the four neutron nuclear data centers) with the third ''CPND meeting'' (consultants' meeting on charged particle nuclear data compilation). In Part I of the meeting, the neutron data centers held a special session on neutron data matters, in particular on the jointly operated neutron data index CINDA, whereas all items of more general interest, in particular the data exchange system EXFOR, were treated in Part II of the meeting

  15. Detailed description of an SSAC at the facility level for light water moderated (off-load refueled) power reactor facilities

    International Nuclear Information System (INIS)

    Jones, R.J.

    1985-03-01

    This report is intended to provide the technical details of an effective State Systems of Accounting for and Control of Nuclear Material (SSAC) which Member States may use, if they wish, to establish and maintain their SSACs. It is expected that systems designed along the lines described would be effective in meeting the objectives of both national and international systems for nuclear material accounting and control. This document accordingly provides a detailed description of a system for the accounting for and control of nuclear material in an off-load refueled light water moderated power reactor facility which can be used by a facility operator to establish his own system to comply with a national system for nuclear material accounting and control and to facilitate application of IAEA safeguards. The scope of this document is limited to descriptions of the following elements: (1) Nuclear Material Measurements; (2) Measurement Quality; (3) Records and Reports; (4) Physical Inventory Taking; (5) Material Balance Closing

  16. Design and prototyping of an ionic liquid piston compressor as a new generation of compressors for hydrogen refueling stations

    DEFF Research Database (Denmark)

    Arjomand Kermani, Nasrin

    to investigate the heat transfer phenomena inside the compression chamber; the system performance is evaluated, followed by the design process. The model is developed based on the mass and energy balance of the hydrogen, and liquid bounded by the wall of the compression chamber. Therefore, at each time step...... and positional node, the model estimates the pressure and temperature of the hydrogen and liquid, the temperature of the compression chamber wall, and the amount of heat extracted from the hydrogen directly at the interface between the hydrogen and liquid, and through the wall. The results indicate......, fabrication, and control of the prototype is described in the presented work. The new compressor design has high potential to be used as an alternative to the conventional reciprocating compressors in hydrogen refueling stations, as it provides a simpler design with lower manufacturing costs, higher...

  17. Understanding the design and economics of distributed tri-generation systems for home and neighborhood refueling - Part I: Single family residence case studies

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xuping; Ogden, Joan M. [University of California, Davis, One Shields Avenue, Davis, CA 95616 (United States)

    2011-02-15

    The potential benefits of hydrogen as a transportation fuel will not be achieved until hydrogen vehicles capture a substantial market share. However, although hydrogen fuel cell vehicle (FCV) technology has been making rapid progress, the lack of a hydrogen infrastructure remains a major barrier for FCV adoption and commercialization. The high cost of building an extensive hydrogen station network and the foreseeable low utilization in the near term discourages private investment. Based on the past experience of fuel infrastructure development for motor vehicles, innovative, distributed, small-volume hydrogen refueling methods may be required to refuel FCVs in the near term. Among small-volume refueling methods, home and neighborhood tri-generation systems (systems that produce electricity and heat for buildings, as well as hydrogen for vehicles) stand out because the technology is available and has potential to alleviate consumer's fuel availability concerns. In addition, it has features attractive to consumers such as convenience and security to refuel at home or in their neighborhood. The objective of this paper is to provide analytical tools for various stakeholders such as policy makers, manufacturers and consumers, to evaluate the design and the technical, economic, and environmental performances of tri-generation systems for home and neighborhood refueling. An interdisciplinary framework and an engineering/economic model is developed and applied to assess home tri-generation systems for single family residences (case studies on neighborhood systems will be provided in a later paper). Major tasks include modeling yearly system operation, exploring the optimal size of a system, estimating the cost of electricity, heat and hydrogen, and system CO{sub 2} emissions, and comparing the results to alternatives. Sensitivity analysis is conducted, and the potential impacts of uncertainties in energy prices, capital cost reduction (or increase), government

  18. Understanding the design and economics of distributed tri-generation systems for home and neighborhood refueling - Part I: Single family residence case studies

    International Nuclear Information System (INIS)

    Li, Xuping; Ogden, Joan M.

    2011-01-01

    The potential benefits of hydrogen as a transportation fuel will not be achieved until hydrogen vehicles capture a substantial market share. However, although hydrogen fuel cell vehicle (FCV) technology has been making rapid progress, the lack of a hydrogen infrastructure remains a major barrier for FCV adoption and commercialization. The high cost of building an extensive hydrogen station network and the foreseeable low utilization in the near term discourages private investment. Based on the past experience of fuel infrastructure development for motor vehicles, innovative, distributed, small-volume hydrogen refueling methods may be required to refuel FCVs in the near term. Among small-volume refueling methods, home and neighborhood tri-generation systems (systems that produce electricity and heat for buildings, as well as hydrogen for vehicles) stand out because the technology is available and has potential to alleviate consumer's fuel availability concerns. In addition, it has features attractive to consumers such as convenience and security to refuel at home or in their neighborhood. The objective of this paper is to provide analytical tools for various stakeholders such as policy makers, manufacturers and consumers, to evaluate the design and the technical, economic, and environmental performances of tri-generation systems for home and neighborhood refueling. An interdisciplinary framework and an engineering/economic model is developed and applied to assess home tri-generation systems for single family residences (case studies on neighborhood systems will be provided in a later paper). Major tasks include modeling yearly system operation, exploring the optimal size of a system, estimating the cost of electricity, heat and hydrogen, and system CO 2 emissions, and comparing the results to alternatives. Sensitivity analysis is conducted, and the potential impacts of uncertainties in energy prices, capital cost reduction (or increase), government incentives and

  19. Ensuring safety of fuel cell applications and hydrogen refuelling. Legislation and standards; Polttokennosovellusten ja vetytankkauksen turvallisuuden varmistaminen. Saeaedoeksiae ja standardeja

    Energy Technology Data Exchange (ETDEWEB)

    Nissila, M.; Sarsama, J.

    2013-09-15

    Fuel cell technology is considered a promising alternative in terms of viable energy systems. The advantages of fuel cell systems include a good efficiency rate and the lack of harmful environmental emissions. Factors which may slow down the commercialisation of fuel cell technology, e.g. fuel cell vehicles, include the high price of hydrogen and the insufficiency of the infrastructure required for the distribution of hydrogen. A large proportion of major car manufacturers are committed to introducing fuel cell cars to the market by 2014-2016. In order to ensure a successful market introduction of fuel cell vehicles, this has to be aligned with the development of the necessary hydrogen infrastructure. In the early commercialisation stages of a new technology, it is important to give the public correct, justified and understandable information on the safety of the fuel cell applications, and also on the measures taken to ensure the safety of applications. A lack of necessary information, inaccurate perceptions and prejudices can have an adverse effect on the public acceptance of fuel cell applications. Hazards and potential accidents related to fuel cell systems are mainly associated with the flammable substances (e.g. hydrogen, methane) used as fuel, the high pressure of hydrogen, electrical hazards, and dangers concerning technical systems in general. The fuel cell applications reviewed in this publication are transport applications and stationary applications and the refuelling system of gaseous hydrogen. The publication concentrates on fuel cells using hydrogen as fuel. The publication gives an overview of how EU-legislation (mainly various directives) and Finnish legislation applies to fuel cell systems and applications, and what kind of safety requirements the legislation sets. In addition, a brief overview of safety standards concerning fuel cell systems and hydrogen refuelling is presented. (orig.)

  20. Workplace Charging. Charging Up University Campuses

    Energy Technology Data Exchange (ETDEWEB)

    Giles, Carrie [ICF International, Fairfax, VA (United States); Ryder, Carrie [ICF International, Fairfax, VA (United States); Lommele, Stephen [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-03-01

    This case study features the experiences of university partners in the U.S. Department of Energy's (DOE) Workplace Charging Challenge with the installation and management of plug-in electric vehicle (PEV) charging stations.

  1. Quick spacecraft charging primer

    International Nuclear Information System (INIS)

    Larsen, Brian Arthur

    2014-01-01

    This is a presentation in PDF format which is a quick spacecraft charging primer, meant to be used for program training. It goes into detail about charging physics, RBSP examples, and how to identify charging.

  2. Understanding electrostatic charge behaviour in aircraft fuel systems

    Science.gov (United States)

    Ogilvy, Jill A.; Hooker, Phil; Bennett, Darrell

    2015-10-01

    This paper presents work on the simulation of electrostatic charge build-up and decay in aircraft fuel systems. A model (EC-Flow) has been developed by BAE Systems under contract to Airbus, to allow the user to assess the effects of changes in design or in refuel conditions. Some of the principles behind the model are outlined. The model allows for a range of system components, including metallic and non-metallic pipes, valves, filters, junctions, bends and orifices. A purpose-built experimental rig was built at the Health and Safety Laboratory in Buxton, UK, to provide comparison data. The rig comprises a fuel delivery system, a test section where different components may be introduced into the system, and a Faraday Pail for measuring generated charge. Diagnostics include wall currents, charge densities and pressure losses. This paper shows sample results from the fitting of model predictions to measurement data and shows how analysis may be used to explain some of the observed trends.

  3. Costs and Operating Dynamics of Integrating Distributed Energy Resources in Commercial and Industrial Buildings with Electric Vehicle Charging

    Science.gov (United States)

    Flores, Robert Joseph

    Growing concerns over greenhouse gas and pollutant emissions have increased the pressure to shift energy conversion paradigms from current forms to more sustainable methods, such as through the use of distributed energy resources (DER) at industrial and commercial buildings. This dissertation is concerned with the optimal design and dispatch of a DER system installed at an industrial or commercial building. An optimization model that accurately captures typical utility costs and the physical constraints of a combined cooling, heating, and power (CCHP) system is designed to size and operate a DER system at a building. The optimization model is then used with cooperative game theory to evaluate the financial performance of a CCHP investment. The CCHP model is then modified to include energy storage, solar powered generators, alternative fuel sources, carbon emission limits, and building interactions with public and fleet PEVs. Then, a separate plugin electric vehicle (PEV) refueling model is developed to determine the cost to operate a public Level 3 fast charging station. The CCHP design and dispatch results show the size of the building load and consistency of the thermal loads are critical to positive financial performance. While using the CCHP system to produce cooling can provide savings, heat production drives positive financial performance. When designing the DER system to reduce carbon emissions, the use of renewable fuels can allow for a gas turbine system with heat recovery to reduce carbon emissions for a large university by 67%. Further reductions require large photovoltaic installations coupled with energy storage or the ability to export electricity back to the grid if costs are to remain relatively low. When considering Level 3 fast charging equipment, demand charges at low PEV travel levels are sufficiently high to discourage adoption. Integration of the equipment can reduce demand charge costs only if the building maximum demand does not coincide

  4. Assessment of occupational exposure to BTEX compounds at a bus diesel-refueling bay: A case study in Johannesburg, South Africa.

    Science.gov (United States)

    Moolla, Raeesa; Curtis, Christopher J; Knight, Jasper

    2015-12-15

    Of increasing concern is pollution by volatile organic compounds, with particular reference to five aromatic hydrocarbons (benzene, toluene, ethyl benzene and two isomeric xylenes; BTEX). These pollutants are classified as hazardous air pollutants. Due to the potential health risks associated with these pollutants, BTEX concentrations were monitored at a bus diesel-refueling bay, in Johannesburg, South Africa, using gas chromatography, coupled with a photo-ionization detector. Results indicate that o-xylene (29-50%) and benzene (13-33%) were found to be the most abundant species of total BTEX at the site. Benzene was within South African occupational limits, but above international occupational exposure limits. On the other hand, occupational concentrations of toluene, ethyl-benzene and xylenes were within national and international occupational limits throughout the monitoring period, based on 8-hour workday weighted averages. Ethyl-benzene and p-xylene concentrations, during winter, correspond to activity at the site, and thus idling of buses during refueling may elevate results. Overall, occupational air quality at the refueling bay is a matter of health concern, especially with regards to benzene exposure, and future reduction strategies are crucial. Discrepancies between national and international limit values merit further investigation to determine whether South African guidelines for benzene are sufficiently precautionary. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Exact docking flight controller for autonomous aerial refueling with back-stepping based high order sliding mode

    Science.gov (United States)

    Su, Zikang; Wang, Honglun; Li, Na; Yu, Yue; Wu, Jianfa

    2018-02-01

    Autonomous aerial refueling (AAR) exact docking control has always been an intractable problem due to the strong nonlinearity, the tight coupling of the 6 DOF aircraft model and the complex disturbances of the multiple environment flows. In this paper, the strongly coupled nonlinear 6 DOF model of the receiver aircraft which considers the multiple flow disturbances is established in the affine nonlinear form to facilitate the nonlinear controller design. The items reflecting the influence of the unknown flow disturbances in the receiver dynamics are taken as the components of the "lumped disturbances" together with the items which have no linear correlation with the virtual control variables. These unmeasurable lumped disturbances are estimated and compensated by a specially designed high order sliding mode observer (HOSMO) with excellent estimation property. With the compensation of the estimated lumped disturbances, a back-stepping high order sliding mode based exact docking flight controller is proposed for AAR in the presence of multiple flow disturbances. Extensive simulation results demonstrate the feasibility and superiority of the proposed docking controller.

  6. An optimal sequence of the reload charge fuel enrichment to a reactor

    International Nuclear Information System (INIS)

    Sato, S.

    1975-01-01

    An optimal sequence of enrichment of the reload charge of a three regions PWR during its life has been determined by dynamic programming. The state of the reactor is specified by the burnup of the fuel in the three regions and their initial enrichments. Constraints were imposed on the power peaking factor, the maximum burnup, the length of each stage between refueling and the total life of the reactor. 'Central-scatter loading' was assumed at each reloading. The two group diffusion equations were solved by the modal method for the static calculations of the reactor. Otimization of enrichment of the reload charge was performed under several hypotheses on the variation of the costs of uranium, costs of enrichment and the plant factor during the reactor life. It was observed that the optimum enrichment of the reload fuel is influenced more by the cost of enrichment rather than plant factor or cost of uranium. (Author) [pt

  7. Small Reactors without On-site Refuelling: Neutronic Characteristics, Emergency Planning and Development Scenarios. Final Report of an IAEA Coordinated Research Project

    International Nuclear Information System (INIS)

    2010-09-01

    Small reactors without on-site refuelling have a capability to operate without reloading or shuffling of fuel in their cores for reasonably long periods of time consistent with plant economy and considerations of energy security, with no fresh or spent fuel being stored at the site during reactor operation. In 2009, more than 25 design concepts of such reactors were analyzed or developed in IAEA Member States, representing both developed and developing countries. Small reactors without on-site refuelling are being developed for several reactor lines, including water cooled reactors, sodium cooled fast reactors, lead and lead bismuth cooled reactors, and also include some non-conventional concepts. Most of the concepts of small reactors without on-site refuelling reactors are at early design stages. To make such reactors viable, further research and development (R and D) is necessary, inter alia, to validate long-life core operation, define and validate new robust types of fuel, justify an option of plant location in the proximity to its users, and examine possible niches that such reactors could fill in future energy systems. To further research and development (R and D) in the areas mentioned above and several others, and to facilitate progress in Member States in design and technology development for small reactors without on-site refueling, the IAEA has conducted a dedicated Coordinated Research Project (CRP) entitled 'Small Reactors without On-site Refuelling' (CRPi25001). The project started late in 2004 and, after a review in 2008, was extended for one more year to be ended in 2009. The project has created a network of 18 research institutions from 10 Member States, representing both developed and developing countries. Over the CRP period, collaborative results were achieved for many of the abovementioned research areas. Some studies highlighted new directions of research to be furthered after the CRP completion. Some studies remained the efforts of

  8. The end of the nuclear power generation. On the recommendations of the ethics committee according to the 13th amendment to the Atomic Energy Act; Das Ende der Atomverstromung. Zu den Empfehlungen der Ethik-Kommission, zur 13. Atomgesetz-Novelle

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Peter [Kanzlei Becker Buettner Held, Berlin (Germany)

    2011-11-15

    With the 13th Amendment to the Atomic Energy Act the nuclear consequences of the earthquake disaster in Japan will result in an end to nuclear power generation in Germany. Here, the legislature resorted to unusual methods. For the first time, the legislature received advices from the ''ethics committee reliable energy supply''. This Ethics Commission adopted its recommendations ''on behalf of the Chancellor'' in the period from 4th April to 28th May, 2011. The understanding of this development, its epochal character and speed of decision-making requires an excursion into the economic history and the establishment of nuclear power generation with their legal protection.

  9. On Dust Charging Equation

    OpenAIRE

    Tsintsadze, Nodar L.; Tsintsadze, Levan N.

    2008-01-01

    A general derivation of the charging equation of a dust grain is presented, and indicated where and when it can be used. A problem of linear fluctuations of charges on the surface of the dust grain is discussed.

  10. Linear shaped charge

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, David; Stofleth, Jerome H.; Saul, Venner W.

    2017-07-11

    Linear shaped charges are described herein. In a general embodiment, the linear shaped charge has an explosive with an elongated arrowhead-shaped profile. The linear shaped charge also has and an elongated v-shaped liner that is inset into a recess of the explosive. Another linear shaped charge includes an explosive that is shaped as a star-shaped prism. Liners are inset into crevices of the explosive, where the explosive acts as a tamper.

  11. Fuel Fraction Analysis of 500 MWth Gas Cooled Fast Reactor with Nitride (UN-PuN) Fuel without Refueling

    Science.gov (United States)

    Dewi Syarifah, Ratna; Su'ud, Zaki; Basar, Khairul; Irwanto, Dwi

    2017-01-01

    Nuclear Power Plant (NPP) is one of candidates which can support electricity demand in the world. The Generation IV NPP has fourth main objective, i.e. sustainability, economics competitiveness, safety and reliability, and proliferation and physical protection. One of Gen-IV reactor type is Gas Cooled Fast Reactor (GFR). In this study, the analysis of fuel fraction in small GFR with nitride fuel has been done. The calculation was performed by SRAC code, both Pij and CITATION calculation. SRAC2002 system is a code system applicable to analyze the neutronics of variety reactor type. And for the data library used JENDL-3.2. The step of SRAC calculation is fuel pin calculated by Pij calculation until the data homogenized, after it homogenized we calculate core reactor. The variation of fuel fraction is 40% up to 65%. The optimum design of 500MWth GFR without refueling with 10 years burn up time reach when radius F1:F2:F3 = 50cm:30cm:30cm and height F1:F2:F3 = 50cm:40cm:30cm, variation percentage Plutonium in F1:F2:F3 = 7%:10%:13%. The optimum fuel fraction is 41% with addition 2% Plutonium weapon grade mix in the fuel. The excess reactivity value in this case 1.848% and the k-eff value is 1.01883. The high burn up reached when the fuel fraction is low. In this study 41% fuel fraction produce faster fissile fuel, so it has highest burn-up level than the other fuel fraction.

  12. Color and magnetic charge

    International Nuclear Information System (INIS)

    Kim, B.R.

    1976-01-01

    Schwinger's conjecture that the color degree of freedom of a quark is equivalent to its degree of freedom of taking different magnetic charges provides a plausible motivation for extending color to leptons. Leptons are just quarks with zero magnetic charges. It is shown that baryon number and lepton number can be replaced by fermion number and magnetic charge

  13. Space Charge Effects

    CERN Document Server

    Ferrario, M.; Palumbo, L.

    2014-12-19

    The space charge forces are those generated directly by the charge distribution, with the inclusion of the image charges and currents due to the interaction of the beam with a perfectly conducting smooth pipe. Space charge forces are responsible for several unwanted phenomena related to beam dynamics, such as energy loss, shift of the synchronous phase and frequency , shift of the betatron frequencies, and instabilities. We will discuss in this lecture the main feature of space charge effects in high-energy storage rings as well as in low-energy linacs and transport lines.

  14. Charged particle detector

    International Nuclear Information System (INIS)

    Hagen, R.D.

    1975-01-01

    A device for detecting the emission of charged particles from a specimen is described. The specimen is placed within an accumulator means which statically accumulates any charged particles emitted from the specimen. The accumulator means is pivotally positioned between a first capacitor plate having a positive electrical charge and a second capacitor plate having a negative electrical charge. The accumulator means is attracted to one capacitor plate and repelled from the other capacitor plate by an amount proportional to the amount and intensity of charged particles emitted by the specimen. (auth)

  15. Biofuels cost developments in the EU27+ until 2030. Full-chain cost assessment and implications of policy options. REFUEL WP4 final report

    International Nuclear Information System (INIS)

    Londo, H.M.; Lensink, S.M.; Deurwaarder, E.P.; Wakker, A.; De Wit, M.; Junginger, M.; Koenighofer, K; Jungmeier, G.

    2008-02-01

    With the rapid developments in the biofuels domain comes the need for biofuel policies that spur their introduction in a responsible way. The REFUEL project, supported by the EU Intelligent Energy Europe programme, develops a road map for biofuels in the EU27+ up to 2030. This WP4 report shows the results of a full-chain analysis of the costs of different biofuels. Effects of different levels of biofuel target setting were analysed, and also the impact of different additional policy measures, such as the introduction of a CO2 pricing mechanism and specific subsidies

  16. MANAGEMENT BOARD MEETING OF 13th MARCH 2003

    CERN Multimedia

    2003-01-01

    Status of Earned Value Management (EVM) J. Ferguson, the EVM Project Leader, reported that the concerted EVM data collection phase that had begun in January was nearing completion, with the last of the 23 groups concerned having begun the data collection process and data corresponding to over 85% of the overall LHC cost-to-completion figure now incorporated in the system. The project team was working closely with the groups that had yet to submit their full data to ensure that the exercise was completed by Easter. The period leading up to the June meetings of the Council and its committees, at which the first EVM report was due to be presented, would then be devoted to tuning the data and ensuring consistent reporting across all the groups concerned. Preparation of the March Meetings of the Council and its Committees The Director-General stated that, in addition to regular items of business, such as the approval of the 2003 Budget at 2003 prices, contract adjudications and a progress report on technology tra...

  17. 13th Forum for Specification and Design Languages (FDL) conference

    CERN Document Server

    Morawiec, Adam; System Specification and Design Languages : Selected Contributions from FDL 2010

    2012-01-01

    This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010.  FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers design verification, automatic synthesis and mechanized debug aids; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven E...

  18. 13th Annual Systems Engineering Conference. Volume 3

    Science.gov (United States)

    2010-10-28

    Internet Explorer with Javascript Enabled; Adobe Acrobat Reader to view generated documents • Does NOT require Java , or ActiveX Plug-ins http...Integration Mozilla, Eclipse, TCPDUMP, LSOF, Expect VIM Hibernate , JSPWiki, Devilspie, TCL, TK, XPM, DBG, Bwidget, TCLLIB, iText, ACE+TAO...by the City of Vienna for city administration – OpenOffice – Firefox, – SAP Java GUI – GIMP, K3b • http://www.wien.gv.at/ma14/wienux.htmlhttp

  19. Proceedings of the 13th International Stellarator Workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    These proceedings include submitted abstracts and papers summarising the work as presented by participants in either oral or poster sessions and the highlights of the Workshop presented by Professor Jeffrey Harris. He stressed that while notable progress has been made in stellarator research overall, the world stellarator program faces important challenges in the coming years. Lead times for the construction of the next generation of devices are approximately 5 years, which makes maintaining continuity in research programs more difficult. The development of a compelling reactor vision based on the stellarator is an important task, especially in the context of renewed activity on the ITER tokamak project. The sharing of ideas, techniques, and results via international collaboration is more important than ever. Individual presentations have been separately indexed.

  20. 13th Conference of the Canadian Number Theory Association

    CERN Document Server

    Alaca, Şaban; Williams, Kenneth

    2015-01-01

    The theory of numbers continues to occupy a central place in modern mathematics because of both its long history over many centuries as well as its many diverse applications to other fields such as discrete mathematics, cryptography, and coding theory. The proof by Andrew Wiles (with Richard Taylor) of Fermat’s last theorem published in 1995 illustrates the high level of difficulty of problems encountered in number-theoretic research as well as the usefulness of the new ideas arising from its proof. The thirteenth conference of the Canadian Number Theory Association was held at Carleton University, Ottawa, Ontario, Canada from June 16 to 20, 2014. Ninety-nine talks were presented at the conference on the theme of advances in the theory of numbers. Topics of the talks reflected the diversity of current trends and activities in modern number theory. These topics included modular forms, hypergeometric functions, elliptic curves, distribution of prime numbers, diophantine equations, L-functions, Diophantine app...

  1. 13th International Mass Spectrometry Conference. Book of Abstracts

    International Nuclear Information System (INIS)

    1994-01-01

    The collection contains abstracts of several hundred papers presented at the international conference on new research and development results and applications of mass spectrometry. Abstracts falling into the INIS scope were indexed separately in the INIS database. (Roboz, P.)

  2. 13th annual meeting of the ALS Users' Association

    International Nuclear Information System (INIS)

    Robinson, Art

    2000-01-01

    A complement of 266 users, staff, and vendors descended upon the Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) from Monday through Wednesday, October 16-18, 2000 for the thirteenth edition of the annual Advanced Light Source (ALS) users meeting. In a departure from previous practice, the meeting featured an increased emphasis on workshops with the result that the proceedings were equally divided between oral and poster presentations and the workshops. After the traditional welcomes and facility updates on the first morning, science dominated the first day and a half comprising the formal meeting with a session of highlights from young researchers, three sessions of scientific highlights from the ALS and elsewhere, and a poster session that included a student poster competition. A set of seven workshops covering research areas of current or growing interest at the ALS rounded out the final day and a half of the meeting

  3. The Bolognese Societates Armatae of the Late 13th Century

    Directory of Open Access Journals (Sweden)

    Gassmann Jürg

    2014-05-01

    Full Text Available The Bologna archives preserve the bye-laws of 24 „armed societies”, dating from between 1230 and the early 1300s, written in good notary Latin. Though known to exist in other Italian city-states, only few non-Bolognese armed society bye-laws are preserved. These armed societies had disappeared everywhere by the Late Middle Ages.

  4. 13th Annual Systems Engineering Conference: Tues- Wed

    Science.gov (United States)

    2010-10-28

    afknprod/ASPs/Reg/ GroupAdmin.asp?Filter=23843&EventID=1464 7 &GroupID=19841 No-Host Social, 1700-1900 Hamlet Restaurant I n t e g r i t y - S e r v i c e...Engineering Relationship Between SE and other Disciplines Systems People • Behaviours (The Head) – Understanding system concepts and viewpoints...level, and used/ consumed by SEs at both the SoS and single system level in the process of developing, maintaining, enhancing, deploying, and assessing

  5. 13th AINSE radiation biology conference: conference handbook

    International Nuclear Information System (INIS)

    1991-01-01

    The forty one papers presented at this conference covered the areas of radiation induced lesions, apoptosis, genetics and radiobiological consequences of low level radiation exposure, clinical applications of radiation, mammalian cells radiosensitivity and radiation-activated proteins

  6. 13th South African psychology congress | Lau | African Safety ...

    African Journals Online (AJOL)

    African Safety Promotion: A Journal of Injury and Violence Prevention. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 2 (2007) >. Log in or Register to get access to full text downloads.

  7. 13th European Conference on Mathematics for Industry

    CERN Document Server

    Mattheij, RMM; Peletier, MA

    2006-01-01

    ECMI has a brand name in Industrial Mathematics and organises successful biannual conferences. This time, the conference on Industrial Mathematics held in Eindhoven in June 2004 Mathematics focused on Aerospace, Electronic Industry, Chemical Technology, Life Sciences, Materials, Geophysics, Financial Mathematics and Water flow. The majority of the invited talks on these topics can be found in these proceedings. Apart form these lectures, a large number of contributed papers and minisymposium papers are included here. They give an interesting and impressive overview of the important place mathematics has achieved in solving all kinds of problems met in industry, and commerce in particular.

  8. EDS'09: 13th International Conference on Elastic & Diffractive Scattering

    CERN Document Server

    CERN. Geneva

    2009-01-01

    The series of International Conferences on Elastic and Diffractive Scattering was founded in 1985 in the picturesque old French town of Blois, famous for its XIV - XVIIth century château, inside of which the first meeting took place. Since then, meetings have been organised every two years in different places of the world: New York (1987), Evanston (1989), Isola d'Elba (1991), Providence (1993), Blois (1995), Seoul (1997), Protvino (1999), Prague (2001), Helsinki (2003), Blois (2005) and Hamburg (2007). The conference will focus on the most recent experimental and theoretical results in particle physics with an emphasis on Quantum Chromodynamics (QCD). http://cern.ch/eds09/ The conference agenda is now full. No further contributions can be accepted.

  9. Prague Overview Week, September 13th-20th, 2003

    CERN Multimedia

    Smith, K

    The week already began on Saturday for a number of system and sub-system meetings, but got into full swing on the Sunday, with a marathon session on how to tackle the challenging task of commissioning the full ATLAS spectrometer. The seeds of lots of ideas have already germinated and should begin to flower soon. Simulation studies of cosmic ray fluxes (and even early experimental measurements in Pit 1) have shown useful rates for the pre-beam phase of commissioning, and single beam measurements will also offer useful opportunities, in particular for trigger timing. Commissioning is clearly a topic which will continue to grow in importance during the next few years. On Monday we were welcomed by our Czech hosts to the first "official" session of the Overview Week, held in the Department of Mechanical Engineering of the Czech Technical University, (CTU), the oldest Technical University in Europe. ATLAS (Prague) includes groups from the CTU, the even longer established Charles University and the Czech Acad...

  10. 13th International Mass Spectrometry Conference. Book of Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The collection contains abstracts of several hundred papers presented at the international conference on new research and development results and applications of mass spectrometry. Abstracts falling into the INIS scope were indexed separately in the INIS database. (Roboz, P.).

  11. The 13th Tihany Symposium on Radiation Chemistry

    Science.gov (United States)

    Wojnárovits, László; Takács, Erzsébet

    2016-07-01

    The Symposium was held in Balatonalmádi, a beautiful city by the Lake Balaton, Hungary, between August 29 and September 3, 2015. This time - to meet the expectations of many colleagues and friends - a place close to the village Tihany was selected, where the first Tihany Symposium was organized in 1962. The participants beside the excellent lectures could also enjoy the panorama of the Lake from the rooms and from the terrace of Hotel Ramada. The number of participants was close to 170 from about 33 countries. The highest number of participants arrived from Poland (14), followed by France (11), Turkey (9) and China (9). The Symposium had 6-6 colleagues from Brazil, Israel, and Romania. Beside China, Asia was represented by a few scientists from the Republic of Korea, Malaysia, Thailand, Philippines and from Saudi Arabia.

  12. 13th International Workshop on Condensed Matter Theories

    CERN Document Server

    1990-01-01

    This volume gathers the invited talks of the XIII International Work­ shop on Condensed Matter Theories which took place in Campos do Jordao near Sao Paulo, Brazil, August 6-12, 1989. It contains contributions in a wide variety of fields including neutral quantum and classical fluids, electronic systems, composite materials, plasmas, atoms, molecules and nuclei, and as this year's workshop reflected the natural preoccupation in materials science with its spectacular prospect for mankind, room tempera­ ture super-conductivity. All topics are treated from a common viewpoint: that of many-body physics, whether theoretical or simu1ational. Since the very first workshop, held at the prestigious Instituto de Fisica Teorica in Sao Paulo, and organized by the same organizer of the 1989 workshop, Professor Valdir Casaca Aguilera-Navarro, the meeting has taken place annually six times in Latin America, four in Europe and three in the United States. Its principal objective has been to innitiate and nurture collaborati...

  13. 13th PERG's annual workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Abstracts of ten of the eleven papers presented and of the opening and closing addresses by the Industrial Research Chair in Peatland Management are included. The papers describe the influence of water table levels and substrate on cloudberry cultivation in abandoned peatlands; productivity of cloudberry in response to cultivation trials; revegetation of a peatland affected by salt water; effect of topography on water availability at the root zone in a harvested bog; fertilization and nutrients in tree plantations on cut-over peatlands; birch invasions in harvested peatlands; peat accumulation versus net carbon sink in peatland restoration; carbon dioxide exchange, water content, and ground spectral reflectance of bog vegetation communities; plant cover and restoration at Chemin- du-Lac; a survey of abandoned fens in Canada and USA; and regional plans for wetland conservation.

  14. Coulombic charge ice

    Science.gov (United States)

    McClarty, P. A.; O'Brien, A.; Pollmann, F.

    2014-05-01

    We consider a classical model of charges ±q on a pyrochlore lattice in the presence of long-range Coulomb interactions. This model first appeared in the early literature on charge order in magnetite [P. W. Anderson, Phys. Rev. 102, 1008 (1956), 10.1103/PhysRev.102.1008]. In the limit where the interactions become short ranged, the model has a ground state with an extensive entropy and dipolar charge-charge correlations. When long-range interactions are introduced, the exact degeneracy is broken. We study the thermodynamics of the model and show the presence of a correlated charge liquid within a temperature window in which the physics is well described as a liquid of screened charged defects. The structure factor in this phase, which has smeared pinch points at the reciprocal lattice points, may be used to detect charge ice experimentally. In addition, the model exhibits fractionally charged excitations ±q/2 which are shown to interact via a 1/r potential. At lower temperatures, the model exhibits a transition to a long-range ordered phase. We are able to treat the Coulombic charge ice model and the dipolar spin ice model on an equal footing by mapping both to a constrained charge model on the diamond lattice. We find that states of the two ice models are related by a staggering field which is reflected in the energetics of these two models. From this perspective, we can understand the origin of the spin ice and charge ice ground states as coming from a dipolar model on a diamond lattice. We study the properties of charge ice in an external electric field, finding that the correlated liquid is robust to the presence of a field in contrast to the case of spin ice in a magnetic field. Finally, we comment on the transport properties of Coulombic charge ice in the correlated liquid phase.

  15. Jet Vertex Charge Reconstruction

    CERN Document Server

    Nektarijevic, Snezana; The ATLAS collaboration

    2015-01-01

    A newly developed algorithm called the jet vertex charge tagger, aimed at identifying the sign of the charge of jets containing $b$-hadrons, referred to as $b$-jets, is presented. In addition to the well established track-based jet charge determination, this algorithm introduces the so-called \\emph{jet vertex charge} reconstruction, which exploits the charge information associated to the displaced vertices within the jet. Furthermore, the charge of a soft muon contained in the jet is taken into account when available. All available information is combined into a multivariate discriminator. The algorithm has been developed on jets matched to generator level $b$-hadrons provided by $t\\bar{t}$ events simulated at $\\sqrt{s}$=13~TeV using the full ATLAS detector simulation and reconstruction.

  16. Charge Islands Through Tunneling

    Science.gov (United States)

    Robinson, Daryl C.

    2002-01-01

    It has been recently reported that the electrical charge in a semiconductive carbon nanotube is not evenly distributed, but rather it is divided into charge "islands." This paper links the aforementioned phenomenon to tunneling and provides further insight into the higher rate of tunneling processes, which makes tunneling devices attractive. This paper also provides a basis for calculating the charge profile over the length of the tube so that nanoscale devices' conductive properties may be fully exploited.

  17. Nuclear reactor refuelling machine

    International Nuclear Information System (INIS)

    Peberdy, J.M.

    1975-01-01

    A guide tube for a fuel element assembly gripper unit is radially displaceable on a parallel linkage from the lower end of a vertically disposed rotatable support structure. The gripper unit is longitudinally slidable within the guide tube to enable a fuel element assembly to be fully withdrawn into the guide tube. The gripper unit has a rotatable gripper head for rotating the fuel element assembly about its longitudinal axis. (U.S.)

  18. Nuclear reactor refueling system

    International Nuclear Information System (INIS)

    Wade, E.E.

    1978-01-01

    A system for transferring fuel assemblies between a nuclear reactor core and a fuel storage area while the fuel assembies remain completely submerged in a continuous body of coolant is described. The system comprises an in-vessel fuel transfer machine located inside the reactor vessel and an ex-vessel fuel transfer machine located in a fuel storage tank. The in-vessel fuel transfer machine comprises two independently rotatable frames with a pivotable fuel transfer apparatus disposed on the lower rotatable frame. The ex-vessel fuel transfer machine comprises one frame with a pivotable fuel transfer apparatus disposed thereon. The pivotable apparatuses are capable of being aligned with each other to transfer a fuel assembly between the reactor vessel and fuel storage tank while the fuel assembly remains completely submerged in a continuous body of coolant. 9 claims, 7 figures

  19. Contractor Software Charges

    National Research Council Canada - National Science Library

    Granetto, Paul

    1994-01-01

    .... Examples of computer software costs that contractors charge through indirect rates are material management systems, security systems, labor accounting systems, and computer-aided design and manufacturing...

  20. Charge Screening in a Charged Condensate

    International Nuclear Information System (INIS)

    Gabadadze, Gregory; Rosen, Rachel A.

    2009-01-01

    We consider a highly dense system of helium-4 nuclei and electrons in which the helium-4 nuclei have condensed. We present the condensation mechanism in the framework of low energy effective field theory and discuss the screening of electric charge in the condensate.

  1. Surface Charging and Points of Zero Charge

    CERN Document Server

    Kosmulski, Marek

    2009-01-01

    Presents Points of Zero Charge data on well-defined specimen of materials sorted by trademark, manufacturer, and location. This text emphasizes the comparison between particular results obtained for different portions of the same or very similar material and synthesizes the information published in research reports over the past few decades

  2. Electric vehicle battery charging controller

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention provides an electric vehicle charging controller. The charging controller comprises a first interface connectable to an electric vehicle charge source for receiving a charging current, a second interface connectable to an electric vehicle for providing the charging current...... to a battery management system in the electric vehicle to charge a battery therein, a first communication unit for receiving a charging message via a communication network, and a control unit for controlling a charging current provided from the charge source to the electric vehicle, the controlling at least...... in part being performed in response to a first information associated with a charging message received by the first communication unit...

  3. Dosimeter charging apparatus

    International Nuclear Information System (INIS)

    Reuter, F.A.; Moorman, Ch.J.

    1985-01-01

    An apparatus for charging a dosimeter which has a capacitor connected between first and second electrodes and a movable electrode in a chamber electrically connected to the first electrode. The movable electrode deflects varying amounts depending upon the charge present on said capacitor. The charger apparatus includes first and second charger electrodes couplable to the first and second dosimeter electrodes. To charge the dosimeter, it is urged downwardly into a charging socket on the charger apparatus. The second dosimeter electrode, which is the dosimeter housing, is electrically coupled to the second charger electrode through a conductive ring which is urged upwardly by a spring. As the dosimeter is urged into the socket, the ring moves downwardly, in contact with the second charger electrode. As the dosimeter is further urged downwardly, the first dosimeter electrode and first charger electrode contact one another, and an insulator post carrying the first and second charger electrodes is urged downwardly. Downward movement of the post effects the application of a charging potential between the first and second charger electrodes. After the charging potential has been applied, the dosimeter is moved further into the charging socket against the force of a relatively heavy biasing spring until the dosimeter reaches a mechanical stop in the charging socket

  4. Spacecraft Surface Charging Handbook

    Science.gov (United States)

    1992-11-01

    Charging of Large Spwc Structure• . in Polut Otbil.’" Prweedings of thre Air For’e Grespykirs fitrano, W4r4 nop em Natural Charging of large Space Stru, ures...3, p. 1433- 1440, 1991. Bowman, C., Bogorad, A., Brucker, G., Seehra, S., and Lloyd, T., "ITO-Coated RF Transparent Materials for Antenna Sunscreen

  5. Unilateral CHARGE association

    NARCIS (Netherlands)

    Trip, J; van Stuijvenberg, M; Dikkers, FG; Pijnenburg, MWH

    A case with a predominantly unilateral CHARGE association is reported. The CHARGE association refers to a combination of congenital malformations. This boy had left-sided anomalies consisting of choanal atresia. coloboma and peripheral facial palsy. The infant had a frontal encephalocele. an anomaly

  6. Nondissipative optimum charge regulator

    Science.gov (United States)

    Rosen, R.; Vitebsky, J. N.

    1970-01-01

    Optimum charge regulator provides constant level charge/discharge control of storage batteries. Basic power transfer and control is performed by solar panel coupled to battery through power switching circuit. Optimum controller senses battery current and modifies duty cycle of switching circuit to maximize current available to battery.

  7. Charged corpuscular beam detector

    Energy Technology Data Exchange (ETDEWEB)

    Hikawa, H; Nishikawa, Y

    1970-09-29

    The present invention relates to a charged particle beam detector which prevents transient phenomena disturbing the path and focusing of a charged particle beam travelling through a mounted axle. The present invention provides a charged particle beam detector capable of decreasing its reaction to the charge in energy of the charged particle beam even if the relative angle between the mounted axle and the scanner is unstable. The detector is characterized by mounting electrically conductive metal pieces of high melting point onto the face of a stepped, heat-resistant electric insulating material such that the pieces partially overlap each other and individually provide electric signals, whereby the detector is no longer affected by the beam. The thickness of the metal piece is selected so that an eddy current is not induced therein by an incident beam, thus the incident beam is not affected. The detector is capable of detecting a misaligned beam since the metal pieces partially overlap each other.

  8. Charge gradient microscopy

    Science.gov (United States)

    Roelofs, Andreas; Hong, Seungbum

    2018-02-06

    A method for rapid imaging of a material specimen includes positioning a tip to contact the material specimen, and applying a force to a surface of the material specimen via the tip. In addition, the method includes moving the tip across the surface of the material specimen while removing electrical charge therefrom, generating a signal produced by contact between the tip and the surface, and detecting, based on the data, the removed electrical charge induced through the tip during movement of the tip across the surface. The method further includes measuring the detected electrical charge.

  9. Charging equipment. Ladegeraet

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, E

    1981-09-17

    The invention refers to a charging equipment, particularly on board charging equipment for charging traction batteries of an electric vehicle from the AC mains supply, consisting of a DC converter, which contains a controlled power transistor, a switching off unloading circuit and a power transmitter, where the secondary winding is connected in series with a rectifier diode, and a smoothing capacitor is connected in parallel with this series circuit. A converter module is provided, which consists of two DC voltage converters, whose power transistors are controlled by a control circuit in opposition with a phase displacement of 180/sup 0/.

  10. Report on the Fourth Reactor Refueling. Laguna Verde Nuclear Central. Unit 1. April-May 1995; Informe de la Cuarta Recarga de Combustible. Central Laguna Verde. Unidad 1. Abril-Mayo 1995

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza L, A; Flores C, E; Lopez G, C P.F.

    1996-12-31

    The fourth refueling of the Unit 1 of Laguna Verde Nuclear Central was executed in the period of April 17 to May 31 of 1995 with the participation of a task group of 358 persons, included technicians and radiation protection officials and auxiliaries.The radiation monitoring and radiological surveillance to the workers was present length ways the refueling process and always attached to the ALARA criteria. The check points for radiation levels were set at: primary container or dry well, reloading floor, decontamination room (level 10.5), turbine building and radioactive waste building. To take advantage of the refueling process, rooms 203 and 213 of the turbine buildings were subject to inspection and maintenance work in valves, heaters and drains of heaters. Management aspects as personnel selection and training, costs, and countable are also presented in this report. Owing to the high cost of man-hour of the members of the ININ staff, its participation in the refueling process was in smaller number than years before. (Author).

  11. Automatic fuel charging machine for nuclear power plants

    International Nuclear Information System (INIS)

    Neda, Toshikazu; Aoki, Shigeo.

    1978-01-01

    Purpose: To enable smooth, safety and rapid refueling by automatically conducting a series of fuel exchange steps through the combination of calculations for fuel control and refueling works. Constitution: Processing operations are conducted based on various data from the memory unit of a computer that processes and stores various data inputted from a nuclear power plant, calculation systems stored in the memory unit of another computer, peripheral units such as typewriters and process input units. A refueling platform is operated by way of a platform control device and a platform driving device, and fuel exchange is conducted by the operation of a channel mounting and demounting device. (Yoshino, Y.)

  12. Pion double charge exchange

    International Nuclear Information System (INIS)

    Cooper, M.D.

    1978-01-01

    The pion double charge exchange data on the oxygen isotopes is reviewed and new data on 9 Be, 12 C, 24 Mg, and 28 Si are presented. Where theoretical calculations exist, they are compared to the data. 9 references

  13. Water Quality Protection Charges

    Data.gov (United States)

    Montgomery County of Maryland — The Water Quality Protection Charge (WQPC) is a line item on your property tax bill. WQPC funds many of the County's clean water initiatives including: • Restoration...

  14. EV Charging Infrastructure Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Karner, Donald [Electric Transportation Inc., Rogers, AR (United States); Garetson, Thomas [Electric Transportation Inc., Rogers, AR (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    As highlighted in the U.S. Department of Energy’s EV Everywhere Grand Challenge, vehicle technology is advancing toward an objective to “… produce plug-in electric vehicles that are as affordable and convenient for the average American family as today’s gasoline-powered vehicles …” [1] by developing more efficient drivetrains, greater battery energy storage per dollar, and lighter-weight vehicle components and construction. With this technology advancement and improved vehicle performance, the objective for charging infrastructure is to promote vehicle adoption and maximize the number of electric miles driven. The EV Everywhere Charging Infrastructure Roadmap (hereafter referred to as Roadmap) looks forward and assumes that the technical challenges and vehicle performance improvements set forth in the EV Everywhere Grand Challenge will be met. The Roadmap identifies and prioritizes deployment of charging infrastructure in support of this charging infrastructure objective for the EV Everywhere Grand Challenge

  15. Space-Charge Effect

    International Nuclear Information System (INIS)

    Chauvin, N

    2013-01-01

    First, this chapter introduces the expressions for the electric and magnetic space-charge internal fields and forces induced by high-intensity beams. Then, the root-mean-square equation with space charge is derived and discussed. In the third section, the one-dimensional Child-Langmuir law, which gives the maximum current density that can be extracted from an ion source, is exposed. Space-charge compensation can occur in the low-energy beam transport lines (located after the ion source). This phenomenon, which counteracts the spacecharge defocusing effect, is explained and its main parameters are presented. The fifth section presents an overview of the principal methods to perform beam dynamics numerical simulations. An example of a particles-in-cells code, SolMaxP, which takes into account space-charge compensation, is given. Finally, beam dynamics simulation results obtained with this code in the case of the IFMIF injector are presented. (author)

  16. Space-Charge Effect

    CERN Document Server

    Chauvin, N.

    2013-12-16

    First, this chapter introduces the expressions for the electric and magnetic space-charge internal fields and forces induced by high-intensity beams. Then, the root-mean-square equation with space charge is derived and discussed. In the third section, the one-dimensional Child-Langmuir law, which gives the maximum current density that can be extracted from an ion source, is exposed. Space-charge compensation can occur in the low-energy beam transport lines (located after the ion source). This phenomenon, which counteracts the spacecharge defocusing effect, is explained and its main parameters are presented. The fifth section presents an overview of the principal methods to perform beam dynamics numerical simulations. An example of a particles-in-cells code, SolMaxP, which takes into account space-charge compensation, is given. Finally, beam dynamics simulation results obtained with this code in the case of the IFMIF injector are presented.

  17. EV Charging Infrastructure Roadmap

    International Nuclear Information System (INIS)

    Karner, Donald; Garetson, Thomas; Francfort, Jim

    2016-01-01

    As highlighted in the U.S. Department of Energy's EV Everywhere Grand Challenge, vehicle technology is advancing toward an objective to ''... produce plug-in electric vehicles that are as affordable and convenient for the average American family as today's gasoline-powered vehicles ...'' [1] by developing more efficient drivetrains, greater battery energy storage per dollar, and lighter-weight vehicle components and construction. With this technology advancement and improved vehicle performance, the objective for charging infrastructure is to promote vehicle adoption and maximize the number of electric miles driven. The EV Everywhere Charging Infrastructure Roadmap (hereafter referred to as Roadmap) looks forward and assumes that the technical challenges and vehicle performance improvements set forth in the EV Everywhere Grand Challenge will be met. The Roadmap identifies and prioritizes deployment of charging infrastructure in support of this charging infrastructure objective for the EV Everywhere Grand Challenge

  18. Charged weak currents

    International Nuclear Information System (INIS)

    Turlay, R.

    1979-01-01

    In this review of charged weak currents I shall concentrate on inclusive high energy neutrino physics. There are surely still things to learn from the low energy weak interaction but I will not discuss it here. Furthermore B. Tallini will discuss the hadronic final state of neutrino interactions. Since the Tokyo conference a few experimental results have appeared on charged current interaction, I will present them and will also comment on important topics which have been published during the last past year. (orig.)

  19. Relativistic charged Bose gas

    International Nuclear Information System (INIS)

    Hines, D.F.; Frankel, N.E.

    1979-01-01

    The charged Bose has been previously studied as a many body problem of great intrinsic interest which can also serve as a model of some real physical systems, for example, superconductors, white dwarf stars and neutron stars. In this article the excitation spectrum of a relativistic spin-zero charged Bose gas is obtained in a dielectric response formulation. Relativity introduces a dip in the spectrum and consequences of this dip for the thermodynamic functions are discussed

  20. STAR-H2: a long-refueling interval battery reactor for hydrogen and water supply to cities of developing countries

    International Nuclear Information System (INIS)

    Wade, D. C.; Doctor, R. D.; Sienicki, J. J.; Matonis, D. T.; Faibish, R. S.; Moisseytsev, A. V.

    2004-01-01

    The STAR-H2 concept is devised to attain Gen-IV goals by responding to foreseen mid century needs and market conditions. It is targeted for support of urban centers in developing countries and is designed to fit within a hierarchical hub-spoke architecture based on regional fuel cycle centers, nuclear fuel and hydrogen as long distance energy carriers and distributed electricity generation to mesh with urban energy distribution infrastructures using grid delivery of electricity, hydrogen, potable water, and communications (and sewage return) through a common grid of easements. Long (20 year) refueling interval and full core cassette refueling supported from client country consortia-owned regional fuel cycle (front and back end) service centers, operating under international oversight are intended to make nuclear-based energy security available to countries which don't wish to emplace an indigenous front to back fuel cycle infrastructure. The regional centers, infrequent cassette refueling and full transuranic recycle (both reload and spent fuel cassettes meet the spent fuel standard of self protection) are intended to provide barriers to misuse of materials and facilities for military purposes. Fuel cassette refueling and shipments are conducted by Regional Center personnel. Reactor fissile self sufficient operation and full transuranic multi recycle both extracts the full energy content of the uranium ore, and consigns only fission products to waste. Small to mid sizing permits incremental deployments where capital financing is dear and/or indigenous infrastructure is at an early stage of development. Modular construction, factory fabrication, and delivery of a turnkey heat source reactor to the client's site where a non safety grade balance of plant has already been emplaced by local labor to local standards will facilitate rapid assembly and initiation of revenue generation. The concept employs extensive levels of passive safety to be consistent with a worldwide

  1. MOSFET Electric-Charge Sensor

    Science.gov (United States)

    Robinson, Paul A., Jr.

    1988-01-01

    Charged-particle probe compact and consumes little power. Proposed modification enables metal oxide/semiconductor field-effect transistor (MOSFET) to act as detector of static electric charges or energetic charged particles. Thickened gate insulation acts as control structure. During measurements metal gate allowed to "float" to potential of charge accumulated in insulation. Stack of modified MOSFET'S constitutes detector of energetic charged particles. Each gate "floats" to potential induced by charged-particle beam penetrating its layer.

  2. Conceptual analyses of neutronic and equilibrium refueling parameters to develop a cost-effective multi-purpose pool-type research reactor using WIMSD and CITVAP codes

    Energy Technology Data Exchange (ETDEWEB)

    Hedayat, Afshin, E-mail: ahedayat@aeoi.org.ir

    2016-12-01

    Highlights: • Introducing a high-beneficent and low-cost multipurpose research reactor. • High technical documents and standard safety issues are introduced coherently. • High effective conceptual neutronic analyses and fuel management strategy. • Gaining high score design criteria and safety margins via 3-D core modeling. • Capacity and capability to produce all medical and industrial radioisotopes. - Abstract: In this paper, neutronic and equilibrium refueling parameters of a multi-purpose cost-effective research reactor have been studied and analyzed. It has been tried to provide periodic and long-term requirements of the irradiating applications coherently. The WIMSD5B and CITVAP codes are used to calculate neutronic parameters and simulate fuel management strategy. The used nuclear data, codes, and calculating methods have been severally benchmarked and verified, successfully. Fundamental concepts, design criteria, and safety issues are introduced and discussed, coherently. Design criteria are selected to gain the most economic benefits per capital costs via minimum required reactor power. Accurate, fast and simplified models have been tried for an integrated decision making and analyses using deterministic codes. Core management, power effects, fuel consumption and burn up effects, and also a complete simulation of the fuel management strategy are presented and analyzed. Results show that the supposed reactor core design can be promisingly suitable in accordance with the commercial multi-purpose irradiating applications. It also retains Operating Limits and Conditions (OLCs) due to standard safety issues, conservatively where safety parameters are calculated using best estimate tools. Such reactor core configuration and integrated refueling task can effectively enhance the Quality Assurance (QA) of the general irradiating applications of the current MTR within their power limits and corresponding OLCs.

  3. Quick charge battery

    Energy Technology Data Exchange (ETDEWEB)

    Parise, R.J.

    1998-07-01

    Electric and hybrid electric vehicles (EVs and HEVs) will become a significant reality in the near future of the automotive industry. Both types of vehicles will need a means to store energy on board. For the present, the method of choice would be lead-acid batteries, with the HEV having auxiliary power supplied by a small internal combustion engine. One of the main drawbacks to lead-acid batteries is internal heat generation as a natural consequence of the charging process as well as resistance losses. This limits the re-charging rate to the battery pack for an EV which has a range of about 80 miles. A quick turnaround on recharge is needed but not yet possible. One of the limiting factors is the heat buildup. For the HEV the auxiliary power unit provides a continuous charge to the battery pack. Therefore heat generation in the lead-acid battery is a constant problem that must be addressed. Presented here is a battery that is capable of quick charging, the Quick Charge Battery with Thermal Management. This is an electrochemical battery, typically a lead-acid battery, without the inherent thermal management problems that have been present in the past. The battery can be used in an all-electric vehicle, a hybrid-electric vehicle or an internal combustion engine vehicle, as well as in other applications that utilize secondary batteries. This is not restricted to only lead-acid batteries. The concept and technology are flexible enough to use in any secondary battery application where thermal management of the battery must be addressed, especially during charging. Any battery with temperature constraints can benefit from this advancement in the state of the art of battery manufacturing. This can also include nickel-cadmium, metal-air, nickel hydroxide, zinc-chloride or any other type of battery whose performance is affected by the temperature control of the interior as well as the exterior of the battery.

  4. Charge transfer in astrophysical nebulae

    International Nuclear Information System (INIS)

    Shields, G.A.

    1990-01-01

    Charge transfer has become a standard ingredient in models of ionized nebulae, supernovae remnants and active galactic nuclei. Charge transfer rate coefficients and the physics of ionized nebulae are considered. Charge transfer is applied to the ionization structure and line emission of ionized nebulae. Photoionized nebulae observations are used to test theoretical predictions of charge transfer rates. (author)

  5. Sources for charged particles

    International Nuclear Information System (INIS)

    Arianer, J.

    1997-01-01

    This document is a basic course on charged particle sources for post-graduate students and thematic schools on large facilities and accelerator physics. A simple but precise description of the creation and the emission of charged particles is presented. This course relies on every year upgraded reference documents. Following relevant topics are considered: electronic emission processes, technological and practical considerations on electron guns, positron sources, production of neutral atoms, ionization, plasma and discharge, different types of positive and negative ion sources, polarized particle sources, materials for the construction of ion sources, low energy beam production and transport. (N.T.)

  6. Charge pulse preamplifier

    International Nuclear Information System (INIS)

    Libs, Gerard.

    1973-01-01

    A charge pulse preamplifier with very low background noise is described. The inlet stage of that preamplifier comprises a cooled field-effect transistor receiving the signal to be amplified at its gate input. Preferably, the charge resistor of said transistor is a field effect transistor, the source inlet of which is connected to the drain inlet of the former transistor through a self-induction coil and a resistor mounted in series. This can be applied to the treatment of the signals delivered by a particle detector in the form of a semi-conductor [fr

  7. Charge transport problem

    International Nuclear Information System (INIS)

    Lee, E.P.

    1977-01-01

    In a recent report (UCID 17346, ''Relativistic Particle Beam in a Semi-Infinite Axially Symmetric conducting channel extending from a perfectly conducting plane,'' Dec. 13, 1976) Cooper and Neil demonstrate that the net charge transported by a beam pulse injected into a channel of finite conductivity equals the charge of the beam itself. The channel is taken to be infinite in the positive z direction, has finite radius and is terminated by a conducting ground plane at z =0. This result is not an obvious one, and it is restricted in its applicability by the special model assumed for the channel. It is the purpose to explain the result of Cooper and Neil in more qualitative terms and to make similar calculations using several other channel models. It must be emphasized that these calculations are not concerned with the fate of the transported charge after the pulse has stopped, but rather with how much charge leaves the ground plane assuming the pulse does not stop

  8. Resonance charge exchange processes

    International Nuclear Information System (INIS)

    Duman, E.L.; Evseev, A.V.; Eletskij, A.V.; Radtsig, A.A.; Smirnov, B.M.

    1979-01-01

    The calculation results for the resonance charge exchange cross sections for positive and negative atomic and molecular ions are given. The calculations are performed on the basis of the asymptotic theory. The factors affecting the calculation accuracy are analysed. The calculation data for 28 systems are compared with the experiment

  9. Charged particle beams

    CERN Document Server

    Humphries, Stanley

    2013-01-01

    Detailed enough for a text and sufficiently comprehensive for a reference, this volume addresses topics vital to understanding high-power accelerators and high-brightness-charged particle beams. Subjects include stochastic cooling, high-brightness injectors, and the free electron laser. Humphries provides students with the critical skills necessary for the problem-solving insights unique to collective physics problems. 1990 edition.

  10. Charged fluids with symmetries

    Indian Academy of Sciences (India)

    It is possible to introduce many types of symmetries on the manifold which restrict the ... metric tensor field and generate constants of the motion along null geodesics .... In this analysis we have studied the role of symmetries for charged perfect ...

  11. Charged singularities: repulsive effects

    Energy Technology Data Exchange (ETDEWEB)

    De Felice, F; Nobili, L [Padua Univ. (Italy). Ist. di Fisica; Calvani, M [Padua Univ. (Italy). Ist. di Astronomia

    1980-07-01

    The repulsive phenomena which a particle experiences in the vicinity of a naked singularity are investigated in the Kerr-Newman space-time. The aim is to extend the knowledge of this fact to charged solutions and to have a direct indication of how, in these situations, the gravitational and electrostatic interactions are competing.

  12. Fractional charge search

    International Nuclear Information System (INIS)

    Innes, W.; Klein, S.; Perl, M.; Price, J.C.

    1982-06-01

    A device to search for fractional charge in matter is described. The sample is coupled to a low-noise amplifier by a periodically varying capacitor and the resulting signal is synchronously detected. The varying capacitor is constructed as a rapidly spinning wheel. Samples of any material in volumes of up to 0.05 ml may be searched in less than an hour

  13. A study on damage effect from boiling liquid expanding vapor explosion(Believe) of LPG charging facility

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Sam Kew; Ham, Eun Gu [Dept. of Architectural Engineering, Kwangwoon University (Korea); Kim, Tae Hwan [Automation System Research Institute, Seoul (Korea)

    1999-12-01

    The LPG refueling station's explosion at Bucheon city was a major accident which with rare frequency of occurrence and large damage effect. Therefore, to prevent similar accident in the future from LPG charging stations which located in urban area. It needs to identify the damage effects of such facilities by comparing theoretically quantities risk and actual damage. The BLEVE effects from the accident showed similar damage effect in case of heat flux, however, the overpressure level reflected at the reduced distance by 15%. The structure damage to the near by area showed comparatively large heat radiation damage to the concrete structure strength and shape changes through heat flux while the overpressure effect was small. 13 refs., 4 figs., 4 tabs.

  14. Irrational Charge from Topological Order

    Science.gov (United States)

    Moessner, R.; Sondhi, S. L.

    2010-10-01

    Topological or deconfined phases of matter exhibit emergent gauge fields and quasiparticles that carry a corresponding gauge charge. In systems with an intrinsic conserved U(1) charge, such as all electronic systems where the Coulombic charge plays this role, these quasiparticles are also characterized by their intrinsic charge. We show that one can take advantage of the topological order fairly generally to produce periodic Hamiltonians which endow the quasiparticles with continuously variable, generically irrational, intrinsic charges. Examples include various topologically ordered lattice models, the three-dimensional resonating valence bond liquid on bipartite lattices as well as water and spin ice. By contrast, the gauge charges of the quasiparticles retain their quantized values.

  15. Effects of Discrete Charge Clustering in Simulations of Charged Interfaces.

    Science.gov (United States)

    Grime, John M A; Khan, Malek O

    2010-10-12

    A system of counterions between charged surfaces is investigated, with the surfaces represented by uniform charged planes and three different arrangements of discrete surface charges - an equispaced grid and two different clustered arrangements. The behaviors of a series of systems with identical net surface charge density are examined, with particular emphasis placed on the long ranged corrections via the method of "charged slabs" and the effects of the simulation cell size. Marked differences are observed in counterion distributions and the osmotic pressure dependent on the particular representation of the charged surfaces; the uniformly charged surfaces and equispaced grids of discrete charge behave in a broadly similar manner, but the clustered systems display a pronounced decrease in osmotic pressure as the simulation size is increased. The influence of the long ranged correction is shown to be minimal for all but the very smallest of system sizes.

  16. Trap-controlled charge transport in corona-charged Teflon

    International Nuclear Information System (INIS)

    Gross, B.; Giacometti, J.A.; Ferreira, G.F.L.; Moreno A, R.A.

    1980-01-01

    The stability of negatively charged Teflon electrets is discussed. It is stated that it can only be explained by the assumption that the transport of excess charge is trap - controlled rather than mobility - controlled. (I.C.R.) [pt

  17. Charge exchange cross-sections for multiply charged ions

    International Nuclear Information System (INIS)

    Midha, J.M.; Gupta, S.C.

    1990-01-01

    A new empirical relation for charge exchange cross-section has been proposed for different charge states of C, N and O colliding with neutral hydrogen. Results are compared with the experimental data. (Author)

  18. The different services carried out on valves during nuclear power plants refuelling outages. To the Valves Integrated Service; La gestion de las diferentes actividades en valvulas durante las paradas. Hacia el Servicio Integral de Valvulas

    Energy Technology Data Exchange (ETDEWEB)

    Laporta, J. M.

    2007-07-01

    The different services carried out on valves during nuclear power plants refuelling outages represent overall one of the activities most interfacing with other refuelling tasks because of the large multidisciplinary teams that participate. Different specialized teams are involved on these activities, mainly on testing, diagnostics and maintenance tasks, performed over the same components, in a sequence of processes closely related with common resources. Under such circumstances, coordination between the different teams intervening and the management of administrative documents and activities in close collaboration with the Control Room is fundamental to ensure that the work is performed in the right sequence avoiding downtimes and optimising the critical path. The integration of these processes and the resources involved allow us to undertake the services globally, forming multidisciplinary teams that optimise resources-fundamentally coordination resources and multi-purpose auxiliary resources-maintaining in all cases the necessary degree of specialisation in keeping with the different tasks making up the Valves Integrated Service. (Author)

  19. Measurement of Neutrino Induced, Charged Current, Charged Pion Production

    Energy Technology Data Exchange (ETDEWEB)

    Wilking, Michael Joseph [Univ. of Colorado, Boulder, CO (United States)

    2009-05-01

    Neutrinos are among the least understood particles in the standard model of particle physics. At neutrino energies in the 1 GeV range, neutrino properties are typically determined by observing the outgoing charged lepton produced in a charged current quasi-elastic interactions. The largest charged current background to these measurements comes from charged current pion production interactions, for which there is very little available data.

  20. Effects of Macroion Geometry and Charge Discretization in Charge Reversal

    OpenAIRE

    Mukherjee, Arup K.

    2008-01-01

    The effects of discrete macroion surface charge distribution and valences of these surface charges and counterions on charge reversal have been studied for macroions of three different geometries and compared with those of continuous surface charge distributions. The geometry of the macroion has been observed to play an important role in overcharging in these cases. The interplay of valences of discrete microions and counterions have noticeable effects on overcharging efficiency. For some val...

  1. Charged particle accelerator

    International Nuclear Information System (INIS)

    Ress, T.I.; Nolde, G.V.

    1974-01-01

    A charged particle accelerator is described. It is made of an enclosure arranged for channeling a stream of charged particles along a predetermined path, and propelling means juxtaposed to said enclosure for generating therein a magnetic field moving in a predetermined direction with respect to each point of said path, the magnetic flux vector of that field being transverse to that path at every point, which gives the particles, along said path, a velocity connected to that of the mobile field by a predetermined relation. This can be applied to the fast production of chemical compounds, to the emission of neutrons and of thermal energy, and to the production of mechanical energy for propelling space ships [fr

  2. Charged particle accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Ress, T I; Nolde, G V

    1974-11-25

    A charged particle accelerator is described. It is made of an enclosure arranged for channeling a stream of charged particles along a predetermined path, and propelling means juxtaposed to the enclosure for generating a magnetic field moving in a predetermined direction with respect to each point of the path, the magnetic flux vector of that field being transverse to that path at every point, which gives the particles, along said path, a velocity connected to that of the mobile field by a predetermined relation. This can be applied to the fast production of chemical compounds, to the emission of neutrons and of thermal energy, and to the production of mechanical energy for propelling space ships.

  3. High Voltage Charge Pump

    KAUST Repository

    Emira, Ahmed A.; Abdelghany, Mohamed A.; Elsayed, Mohannad Yomn; Elshurafa, Amro M; Salama, Khaled N.

    2014-01-01

    Various embodiments of a high voltage charge pump are described. One embodiment is a charge pump circuit that comprises a plurality of switching stages each including a clock input, a clock input inverse, a clock output, and a clock output inverse. The circuit further comprises a plurality of pumping capacitors, wherein one or more pumping capacitors are coupled to a corresponding switching stage. The circuit also comprises a maximum selection circuit coupled to a last switching stage among the plurality of switching stages, the maximum selection circuit configured to filter noise on the output clock and the output clock inverse of the last switching stage, the maximum selection circuit further configured to generate a DC output voltage based on the output clock and the output clock inverse of the last switching stage.

  4. High Voltage Charge Pump

    KAUST Repository

    Emira, Ahmed A.

    2014-10-09

    Various embodiments of a high voltage charge pump are described. One embodiment is a charge pump circuit that comprises a plurality of switching stages each including a clock input, a clock input inverse, a clock output, and a clock output inverse. The circuit further comprises a plurality of pumping capacitors, wherein one or more pumping capacitors are coupled to a corresponding switching stage. The circuit also comprises a maximum selection circuit coupled to a last switching stage among the plurality of switching stages, the maximum selection circuit configured to filter noise on the output clock and the output clock inverse of the last switching stage, the maximum selection circuit further configured to generate a DC output voltage based on the output clock and the output clock inverse of the last switching stage.

  5. Spacecraft Charge Monitor

    Science.gov (United States)

    Goembel, L.

    2003-12-01

    We are currently developing a flight prototype Spacecraft Charge Monitor (SCM) with support from NASA's Small Business Innovation Research (SBIR) program. The device will use a recently proposed high energy-resolution electron spectroscopic technique to determine spacecraft floating potential. The inspiration for the technique came from data collected by the Atmosphere Explorer (AE) satellites in the 1970s. The data available from the AE satellites indicate that the SCM may be able to determine spacecraft floating potential to within 0.1 V under certain conditions. Such accurate measurement of spacecraft charge could be used to correct biases in space plasma measurements. The device may also be able to measure spacecraft floating potential in the solar wind and in orbit around other planets.

  6. The quasilocalized charge approximation

    International Nuclear Information System (INIS)

    Kalman, G J; Golden, K I; Donko, Z; Hartmann, P

    2005-01-01

    The quasilocalized charge approximation (QLCA) has been used for some time as a formalism for the calculation of the dielectric response and for determining the collective mode dispersion in strongly coupled Coulomb and Yukawa liquids. The approach is based on a microscopic model in which the charges are quasilocalized on a short-time scale in local potential fluctuations. We review the conceptual basis and theoretical structure of the QLC approach and together with recent results from molecular dynamics simulations that corroborate and quantify the theoretical concepts. We also summarize the major applications of the QLCA to various physical systems, combined with the corresponding results of the molecular dynamics simulations and point out the general agreement and instances of disagreement between the two

  7. Extremally charged line

    International Nuclear Information System (INIS)

    Ryzner, Jirí; Žofka, Martin

    2016-01-01

    We investigate the properties of a static, cylindrically symmetric Majumdar–Papapetrou-type solution of Einstein–Maxwell equations. We locate its singularities, establish its algebraic type, find its asymptotic properties and weak-field limit, study the structure of electrogeodesics, and determine the mass and charge of its sources. We provide an interpretation of the spacetime and discuss the parameter appearing in the metric. (paper)

  8. Hidden charged dark matter

    International Nuclear Information System (INIS)

    Feng, Jonathan L.; Kaplinghat, Manoj; Tu, Huitzu; Yu, Hai-Bo

    2009-01-01

    Can dark matter be stabilized by charge conservation, just as the electron is in the standard model? We examine the possibility that dark matter is hidden, that is, neutral under all standard model gauge interactions, but charged under an exact (\\rm U)(1) gauge symmetry of the hidden sector. Such candidates are predicted in WIMPless models, supersymmetric models in which hidden dark matter has the desired thermal relic density for a wide range of masses. Hidden charged dark matter has many novel properties not shared by neutral dark matter: (1) bound state formation and Sommerfeld-enhanced annihilation after chemical freeze out may reduce its relic density, (2) similar effects greatly enhance dark matter annihilation in protohalos at redshifts of z ∼ 30, (3) Compton scattering off hidden photons delays kinetic decoupling, suppressing small scale structure, and (4) Rutherford scattering makes such dark matter self-interacting and collisional, potentially impacting properties of the Bullet Cluster and the observed morphology of galactic halos. We analyze all of these effects in a WIMPless model in which the hidden sector is a simplified version of the minimal supersymmetric standard model and the dark matter is a hidden sector stau. We find that charged hidden dark matter is viable and consistent with the correct relic density for reasonable model parameters and dark matter masses in the range 1 GeV ∼ X ∼< 10 TeV. At the same time, in the preferred range of parameters, this model predicts cores in the dark matter halos of small galaxies and other halo properties that may be within the reach of future observations. These models therefore provide a viable and well-motivated framework for collisional dark matter with Sommerfeld enhancement, with novel implications for astrophysics and dark matter searches

  9. Controlling charge on levitating drops.

    Science.gov (United States)

    Hilger, Ryan T; Westphall, Michael S; Smith, Lloyd M

    2007-08-01

    Levitation technologies are used in containerless processing of materials, as microscale manipulators and reactors, and in the study of single drops and particles. Presented here is a method for controlling the amount and polarity of charge on a levitating drop. The method uses single-axis acoustic levitation to trap and levitate a single, initially neutral drop with a diameter between 400 microm and 2 mm. This drop is then charged in a controllable manner using discrete packets of charge in the form of charged drops produced by a piezoelectric drop-on-demand dispenser equipped with a charging electrode. The magnitude of the charge on the dispensed drops can be adjusted by varying the voltage applied to the charging electrode. The polarity of the charge on the added drops can be changed allowing removal of charge from the trapped drop (by neutralization) and polarity reversal. The maximum amount of added charge is limited by repulsion of like charges between the drops in the trap. This charging scheme can aid in micromanipulation and the study of charged drops and particles using levitation.

  10. Charge states of ions, and mechanisms of charge ordering transitions

    Science.gov (United States)

    Pickett, Warren E.; Quan, Yundi; Pardo, Victor

    2014-07-01

    To gain insight into the mechanism of charge ordering transitions, which conventionally are pictured as a disproportionation of an ion M as 2Mn+→M(n+1)+ + M(n-1)+, we (1) review and reconsider the charge state (or oxidation number) picture itself, (2) introduce new results for the putative charge ordering compound AgNiO2 and the dual charge state insulator AgO, and (3) analyze the cationic occupations of the actual (not formal) charge, and work to reconcile the conundrums that arise. We establish that several of the clearest cases of charge ordering transitions involve no disproportion (no charge transfer between the cations, and hence no charge ordering), and that the experimental data used to support charge ordering can be accounted for within density functional-based calculations that contain no charge transfer between cations. We propose that the charge state picture retains meaning and importance, at least in many cases, if one focuses on Wannier functions rather than atomic orbitals. The challenge of modeling charge ordering transitions with model Hamiltonians isdiscussed.

  11. Search for fractional charge

    International Nuclear Information System (INIS)

    Turner, R.E.

    1984-01-01

    A search was made for fractional charges of the form Z plus two-thirds e, where Z is an integer. It was assumed that the charges exist in natural form bound with other fractional charges in neutral molecules. It was further assumed that these neutral molecules are present in air. Two concentration schemes were employed. One sample was derived from the waste gases from a xenon distillation plant. This assumes that high mass, low vapor pressure components of air are concentrated along with the xenon. The second sample involved ionizing air, allowing a brief recombination period, and then collecting residual ions on the surface of titanium discs. Both samples were analyzed at the University of Rochester in a system using a tandem Van de Graff to accelerate particles through an essentially electrostatic beam handling system. The detector system employed both a Time of Flight and an energy-sensitive gas ionization detector. In the most sensitive mode of analysis, a gas absorber was inserted in the beam path to block the intense background. The presence of an absorber limited the search to highly penetrating particles. Effectively, this limited the search to particles with low Z and masses greater than roughly fifty GeV. The final sensitivities attained were on the order of 1 x 10 -20 for the ionized air sample and 1 x 10 -21 for the gas sample. A discussion of the caveats that could reduce the actual level of sensitivity is included

  12. Charged Particle Radiography

    International Nuclear Information System (INIS)

    Morris, Chris

    2004-01-01

    The Coulomb multiple scattering of charged particles as they pass through material allows them to be used as a radiographic probe. This forms the basis for a new kind of radiography that is finding application where conventional x-ray radiography is limited by flux or backgrounds. Charged-particle radiography is providing a versatile new probe that has advantages over conventional x-ray radiography for some unique application. Proton radiography has been used to make quantitative motion pictures of high explosive driven experiments and proves to be of great value for radiographing experiments that mock up nuclear weapon primaries for stockpile certification. By taking advantage of magnetic lens to magnify images and by using the very bright beams that can be made with electrons, charged-particle radiography may be useful for studying the fine spatial detail and very fast motion in laser driven implosion experiments at the National Ignition Facility. Finally, radiographs can be made using cosmic-ray muons for searching vehicles and cargo containers for surreptitious cargo of high z materials such as uranium or plutonium.

  13. Submerged AUV Charging Station

    Science.gov (United States)

    Jones, Jack A.; Chao, Yi; Curtin, Thomas

    2014-01-01

    Autonomous Underwater Vehicles (AUVs) are becoming increasingly important for military surveillance and mine detection. Most AUVs are battery powered and have limited lifetimes of a few days to a few weeks. This greatly limits the distance that AUVs can travel underwater. Using a series of submerged AUV charging stations, AUVs could travel a limited distance to the next charging station, recharge its batteries, and continue to the next charging station, thus traveling great distances in a relatively short time, similar to the Old West “Pony Express.” One solution is to use temperature differences at various depths in the ocean to produce electricity, which is then stored in a submerged battery. It is preferred to have the upper buoy submerged a reasonable distance below the surface, so as not to be seen from above and not to be inadvertently destroyed by storms or ocean going vessels. In a previous invention, a phase change material (PCM) is melted (expanded) at warm temperatures, for example, 15 °C, and frozen (contracted) at cooler temperatures, for example, 8 °C. Tubes containing the PCM, which could be paraffin such as pentadecane, would be inserted into a container filled with hydraulic oil. When the PCM is melted (expanded), it pushes the oil out into a container that is pressurized to about 3,000 psi (approx equals 20.7 MPa). When a valve is opened, the high-pressure oil passes through a hydraulic motor, which turns a generator and charges a battery. The low-pressure oil is finally reabsorbed into the PCM canister when the PCM tubes are frozen (contracted). Some of the electricity produced could be used to control an external bladder or a motor to the tether line, such that depth cycling is continued for a very long period of time. Alternatively, after the electricity is generated by the hydraulic motor, the exiting low-pressure oil from the hydraulic motor could be vented directly to an external bladder on the AUV, such that filling of the bladder

  14. Gravitational field of charged gyratons

    Energy Technology Data Exchange (ETDEWEB)

    Frolov, Valeri P [Theoretical Physics Institute, University of Alberta, Edmonton, Alberta, T6G 2J1 (Canada); Zelnikov, Andrei [Theoretical Physics Institute, University of Alberta, Edmonton, Alberta, T6G 2J1 (Canada); Lebedev Physics Institute, Leninsky prospect 53, 119 991, Moscow (Russian Federation)

    2006-03-21

    We study relativistic gyratons which carry an electric charge. The Einstein-Maxwell equations in arbitrary dimensions are solved exactly in the case of a charged gyraton propagating in an asymptotically flat metric.

  15. Comparative Study on Various Geometrical Core Design of 300 MWth Gas Cooled Fast Reactor with UN-PuN Fuel Longlife without Refuelling

    Science.gov (United States)

    Dewi Syarifah, Ratna; Su'ud, Zaki; Basar, Khairul; Irwanto, Dwi

    2017-07-01

    Nuclear power has progressive improvement in the operating performance of exiting reactors and ensuring economic competitiveness of nuclear electricity around the world. The GFR use gas coolant and fast neutron spectrum. This research use helium coolant which has low neutron moderation, chemical inert and single phase. Comparative study on various geometrical core design for modular GFR with UN-PuN fuel long life without refuelling has been done. The calculation use SRAC2006 code both PIJ calculation and CITATION calculation. The data libraries use JENDL 4.0. The variation of fuel fraction is 40% until 65%. In this research, we varied the geometry of core reactor to find the optimum geometry design. The variation of the geometry design is balance cylinder; it means that the diameter active core (D) same with height active core (H). Second, pancake cylinder (D>H) and third, tall cylinder (Dpower is 300 MWth. First calculation, we calculate survey parameter for UN-PuN fuel with fissile contain from Plutonium waste LWR for each geometry. The minimum power density is around 72 Watt/cc, and maximum power density 114 Watt/cc. After we calculate with various geometry core, when we use the balance geometry, the k-eff value flattest and more stable than the others.

  16. Development and demonstration of techniques for reducing occupational radiation doses during refueling outages. Tasks 7A/7B. Advanced outage management and radiation exposure control

    International Nuclear Information System (INIS)

    1985-03-01

    Objectives of Tasks 7A and 7B were to develop and demonstrate computer based systems to assist plant management and staff in utilizing information more effectively to reduce occupational exposures received as a result of refueling outages, and to shorten the duration of the outage. The Advanced Outage Management (AOM) Tool (Task 7A) is an automated outage planning system specifically designed to meet the needs of nuclear plant outage management. The primary objective of the AOM tool is to provide a computerized system that can manipulate the information typically associated with outage planning and scheduling to furnish reports and schedules that more accurately project the future course of the outage. The Radiation Exposure Control (REC) Tool (Task 7B) is a computerized personnel radiation exposure accounting and management system designed to enable nuclear plant management to project and monitor total personnel radiation exposure on a real-time basis. The two systems were designed to operate on the same computer system and interface through a common database that enables information sharing between plant organizations not typically interfaced. This interfacing provides outage planners with a means of incorporating occupational radiation exposure as a factor for making decisions on the course of an outage

  17. The REFUEL EU road map for biofuels in transport: Application of the project's tools to some short-term policy issues

    International Nuclear Information System (INIS)

    Londo, Marc; Lensink, Sander; Wakker, Andre; Fischer, Guenther; Prieler, Sylvia; van Velthuizen, Harrij; de Wit, Marc; Faaij, Andre; Junginger, Martin; Berndes, Goeran; Hansson, Julia; Egeskog, Andrea; Duer, Henrik; Lundbaek, Jeppe; Wisniewski, Grzegorz; Kupczyk, Adam; Koenighofer, Kurt

    2010-01-01

    The current hot debate on biofuels calls for a balanced and realistic long-term strategy for biofuels. The REFUEL project provides several ingredients for such a strategy. Analyses in this project indicate that domestically produced biofuels can cover a significant share of EU fuel demand in the coming decades, with the EU-12 new member states and Ukraine as most promising regions. This potential can be realised with residual streams and on existing agricultural land, without conversion of e.g. nature reserves. Second generation biofuels are essential for the long-term success of biofuels due to their superior performance in many ways. But generally, the key challenge for the near future would be how to enhance the development of biofuels in a responsible way, i.e. stimulating the production chains with the best performance, and preventing negative impacts e.g., by paying careful attention to possible system impacts of biofuel production such as indirect land use changes and rising food prices. Finally, 2nd generation biofuels require specific policy: the precursor role of 1st generation is overrated, both in technical terms as well as in their role as market precursors. When it comes to synergies, 2nd generation biofuels might benefit more from other developments in the energy sector, such as initiatives in co-firing of biomass for (heat and) power, than from 1st generation biofuels, also because of the public resistance that the latter induce. (author)

  18. Space charge effects of CSR

    International Nuclear Information System (INIS)

    Liu Yong; Xia Jiawen; Xu Xiangyang; Lu Xiaowen; Wu Junli

    2000-01-01

    Cooler Storage Ring (CSR), and upgrading program planned at the Heavy Ion Research Facility in Lanzhou (HIRFL), will supply beams with higher quality and intensity. Space charge effects should be considered due to this magnitude of intensity in CSR. The concept and some phenomena of space charge effects are discussed. Space charge intensity limit and space charge tune shift of normal CSR operation are given. It is of significance for the construction and operation of the future facility

  19. Charging Users for Library Service.

    Science.gov (United States)

    Cooper, Michael D.

    1978-01-01

    Examines the question of instituting direct charges for library service, using on-line bibliographic searching as an example, and contrasts this with the current indirect charging system where services are paid for by taxes. Information, as a merit good, should be supplied with or without direct charges, depending upon user status. (CWM)

  20. Tools for charged Higgs bosons

    International Nuclear Information System (INIS)

    Staal, Oscar

    2010-12-01

    We review the status of publicly available software tools applicable to charged Higgs physics. A selection of codes are highlighted in more detail, focusing on new developments that have taken place since the previous charged Higgs workshop in 2008. We conclude that phenomenologists now have the tools ready to face the LHC data. A new web page collecting charged Higgs resources is presented. (orig.)

  1. Charge orders in organic charge-transfer salts

    International Nuclear Information System (INIS)

    Kaneko, Ryui; Valentí, Roser; Tocchio, Luca F; Becca, Federico

    2017-01-01

    Motivated by recent experimental suggestions of charge-order-driven ferroelectricity in organic charge-transfer salts, such as κ -(BEDT-TTF) 2 Cu[N(CN) 2 ]Cl, we investigate magnetic and charge-ordered phases that emerge in an extended two-orbital Hubbard model on the anisotropic triangular lattice at 3/4 filling. This model takes into account the presence of two organic BEDT-TTF molecules, which form a dimer on each site of the lattice, and includes short-range intramolecular and intermolecular interactions and hoppings. By using variational wave functions and quantum Monte Carlo techniques, we find two polar states with charge disproportionation inside the dimer, hinting to ferroelectricity. These charge-ordered insulating phases are stabilized in the strongly correlated limit and their actual charge pattern is determined by the relative strength of intradimer to interdimer couplings. Our results suggest that ferroelectricity is not driven by magnetism, since these polar phases can be stabilized also without antiferromagnetic order and provide a possible microscopic explanation of the experimental observations. In addition, a conventional dimer-Mott state (with uniform density and antiferromagnetic order) and a nonpolar charge-ordered state (with charge-rich and charge-poor dimers forming a checkerboard pattern) can be stabilized in the strong-coupling regime. Finally, when electron–electron interactions are weak, metallic states appear, with either uniform charge distribution or a peculiar 12-site periodicity that generates honeycomb-like charge order. (paper)

  2. Charge sniffer for electrostatics demonstrations

    Science.gov (United States)

    Dinca, Mihai P.

    2011-02-01

    An electronic electroscope with a special design for demonstrations and experiments on static electricity is described. It operates as an electric charge sniffer by detecting slightly charged objects when they are brought to the front of its sensing electrode. The sniffer has the advantage of combining high directional sensitivity with a logarithmic bar display. It allows for the identification of electric charge polarity during charge separation by friction, peeling, electrostatic induction, batteries, or secondary coils of power transformers. Other experiments in electrostatics, such as observing the electric field of an oscillating dipole and the distance dependence of the electric field generated by simple charge configurations, are also described.

  3. Fuel charging machine

    International Nuclear Information System (INIS)

    Uchikawa, Sadao.

    1978-01-01

    Purpose: To enable continuous fuel discharging and charging steps in a bwr type reactor by effecting positioning only for once by providing a plurality of fuel assembly grippers and their drives co-axially on a rotatable surface. Constitution: A plurality of fuel assembly grippers and their drives are provided co-axially on a rotatable surface. For example, a gripper A, a drive B, a gripper C and a drive D are arranged co-axially in symmetric positions on a disk rotated on rails by wheels and rotational drives. A new fuel in a fuel pool is gripped by the gripper A and transported above the reactor core. Then, the disk is positioned so that the gripper C can grip the spent fuel in the core, and the fuel to be discharged is gripped and raised by the gripper C. Then the disk is rotated by 180 0 and the new fuel in the gripper A is charged into the position from which the old fuel has been discharged and, finally, the discharged fuel is sent to the fuel pool for storage. (Seki, T.)

  4. Battery charging control methods, electric vehicle charging methods, battery charging apparatuses and rechargeable battery systems

    Science.gov (United States)

    Tuffner, Francis K [Richland, WA; Kintner-Meyer, Michael C. W. [Richland, WA; Hammerstrom, Donald J [West Richland, WA; Pratt, Richard M [Richland, WA

    2012-05-22

    Battery charging control methods, electric vehicle charging methods, battery charging apparatuses and rechargeable battery systems. According to one aspect, a battery charging control method includes accessing information regarding a presence of at least one of a surplus and a deficiency of electrical energy upon an electrical power distribution system at a plurality of different moments in time, and using the information, controlling an adjustment of an amount of the electrical energy provided from the electrical power distribution system to a rechargeable battery to charge the rechargeable battery.

  5. Surface charge compensation for a highly charged ion emission microscope

    International Nuclear Information System (INIS)

    McDonald, J.W.; Hamza, A.V.; Newman, M.W.; Holder, J.P.; Schneider, D.H.G.; Schenkel, T.

    2003-01-01

    A surface charge compensation electron flood gun has been added to the Lawrence Livermore National Laboratory (LLNL) highly charged ion (HCI) emission microscope. HCI surface interaction results in a significant charge residue being left on the surface of insulators and semiconductors. This residual charge causes undesirable aberrations in the microscope images and a reduction of the Time-Of-Flight (TOF) mass resolution when studying the surfaces of insulators and semiconductors. The benefits and problems associated with HCI microscopy and recent results of the electron flood gun enhanced HCI microscope are discussed

  6. Observations and insights from low power and shutdown studies: Grand Gulf Nuclear Power Plant during POS 5 of a refueling outage

    International Nuclear Information System (INIS)

    Whitehead, D.W.; Brown, T.D.; Forester, J.A.

    1995-04-01

    With the recent completion of the documentation of the results from the Grand Gulf Nuclear Power Plant Low Power and Shutdown (LP and S) project funded by the US Nuclear Regulatory Commission (NRC), detailed probabilistic risk assessment (PRA) information from a boiling water reactor (BWR) for a specific time period in LP and S conditions became available for examination. This report contains observations and insights extracted from an examination of: (1) results in the LP and S documentation; (2) the specific models and assumptions used in the LP and S analyses; (3) selected results from the full-power analysis; (4) the experience of the analysts who performed the original LP and S study; and (5) results from sensitivity calculations performed as part of this project to help determine the impact that model assumptions and data values had on the results from the original LP and S analysis. Specifically, this study makes observations on and develops insights from the estimates of core damage frequency and aggregate risk (early fatalities and total latent cancer fatalities) associated with operations during plant operational state (POS) 5 (i.e., basically cold shutdown as defined by Technical Specifications) during a refueling outage for traditional internal events. A discussion of similarities and differences between full power accidents and accidents during LP and S conditions is provided. As part of this discussion, core damage frequency and risks results are presented on a per hour and per calendar year basis, allowing alternative perspectives on both the core damage frequency and risk associated with these two operational states

  7. LiquidPower-1. Development and proof-of-concept of core methanol reformer for stationary and motive fuel cell systems and hydrogen refuelling stations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Krogsgaard, J.; Mortensen, Henrik [H2 Logic A/S, Herning (Denmark); Skipper, T. [Dantherm Power A/S, Hobro (Denmark)

    2013-03-15

    LiquidPower-1 has developed laboratory test systems for methanol reforming and tested reformers from four different suppliers. This has contributed to determining the state-of-the-art level for methanol reforming and enabled an update of the LiquidPower R and D Roadmap onwards a commercialisation of the technology. The project has achieved the following results: 1) A detailed technical specification of methanol reformers for the fuel cell back-up power and hydrogen refueling station markets has been conducted; 2) Laboratory test systems for methanol reformers has been developed and established at Dantherm Power and H2 Logic; 3) Initial test of reformers from four suppliers has been conducted - with two suppliers being selected for continued tests; 4) Extensive laboratory tests conducted of reformers from two suppliers, with the aim to determine state-of-the-art for price, efficiency, capacity and lifetime. Several errors and break-downs were experienced during the test period, which revealed a need for further R and D to improve lifetime and stability; 5) The LiquidPower F and U Roadmap has been updated. Reformer TCO targets (Total Cost of Operation) for each of the markets have been calculated including updated targets for efficiency and cost. These targets also serve as the main ones to be pursued as part of the continued R and D roadmap execution. Compared to the previous edition of the Roadmap, the project has confirmed the viability of methanol reforming, but also revealed that stability and lifetime needs to be addressed and solved before commencing commercialization of the technology. If the Roadmap is successful a commercialization can commence beyond 2015. (Author)

  8. An optimal hydrogen control analysis for the in-containment refueling storage tank (IRWST) of the Korean next generation reactor (KNGR) containment under severe accidents

    International Nuclear Information System (INIS)

    Byung-Chul, Lee; Hee-Jin, Ko; Se-Won, Lee

    2001-01-01

    Under severe accidents that a large amount of hydrogen is expected to release, the In-Containment Refueling Water Storage Tank (IRWST) air space has more worse condition with respect to the hydrogen control since, as one of hydrogen source compartment, normally it is separated from the other compartments and has relatively small volume. The hydrogen concentrations in the IRWST gas space, when the hydrogen was directly released into this area, were analyzed using the MAAP4 code in order to investigate if locally very high concentrations could be reduced so that inadvertent detonation or detonation-to-deflagration (DDT) in this area might be prevented. For this purpose, the thermo-hydraulic and combustion phenomena being capable of occurring in the IRWST were also considered. As a result of numerical calculations with 12-compartment containment model, the time duration that the flammable gas mixture was formed was greatly decreased via oxygen-starved or steam-rich conditions, although instantaneously peak concentration itself could not be avoided. Moreover, if the diffusion flame or steam stripping can be occurred in the IRWST, it was expected to have more chance to control the hydrogen in the IRWST gas space. After the hydrogen finished to be rapidly released, the hydrogen in this area could be controlled by the PARs' hydrogen depletion and by igniter's deliberate burning. Especially, the review on the analyses for two typical, but most probable sequences of quite a different hydrogen release modes gives an insight that the flammable gas mixture in the IRWST can be avoid by rapid depressurization operation, which is recommendable for being implemented into accident management program. (authors)

  9. Sequential charged particle reaction

    International Nuclear Information System (INIS)

    Hori, Jun-ichi; Ochiai, Kentaro; Sato, Satoshi; Yamauchi, Michinori; Nishitani, Takeo

    2004-01-01

    The effective cross sections for producing the sequential reaction products in F82H, pure vanadium and LiF with respect to the 14.9-MeV neutron were obtained and compared with the estimation ones. Since the sequential reactions depend on the secondary charged particles behavior, the effective cross sections are corresponding to the target nuclei and the material composition. The effective cross sections were also estimated by using the EAF-libraries and compared with the experimental ones. There were large discrepancies between estimated and experimental values. Additionally, we showed the contribution of the sequential reaction on the induced activity and dose rate in the boundary region with water. From the present study, it has been clarified that the sequential reactions are of great importance to evaluate the dose rates around the surface of cooling pipe and the activated corrosion products. (author)

  10. Charge parity exotic mesons

    International Nuclear Information System (INIS)

    Burden, C.J.

    1998-01-01

    Full text: Evidence for a meson with exotic quantum numbers J PC 1 -+ , the ρ(1405), has been observed at the AGS at Brookhaven and Crystal Barrel at CERN. This meson is exotic to the extent that its quantum numbers are not consistent with the generalised Pauli exclusion principle applied to the naive constituent quark model. In a fully relativistic field theoretic treatment, however, there is nothing in principle to preclude the existence of charge parity exotics. Using our earlier covariant Bethe-Salpeter model of light-quark mesons with no new parameter fitting we demonstrate the existence of a q - q-bar bound state with the quantum numbers of the ρ

  11. Battery charging stations

    Energy Technology Data Exchange (ETDEWEB)

    Bergey, M.

    1997-12-01

    This paper discusses the concept of battery charging stations (BCSs), designed to service rural owners of battery power sources. Many such power sources now are transported to urban areas for recharging. A BCS provides the opportunity to locate these facilities closer to the user, is often powered by renewable sources, or hybrid systems, takes advantage of economies of scale, and has the potential to provide lower cost of service, better service, and better cost recovery than other rural electrification programs. Typical systems discussed can service 200 to 1200 people, and consist of stations powered by photovoltaics, wind/PV, wind/diesel, or diesel only. Examples of installed systems are presented, followed by cost figures, economic analysis, and typical system design and performance numbers.

  12. Reactor fuel charging equipment

    International Nuclear Information System (INIS)

    Wade, Elman.

    1977-01-01

    In many types of reactor fuel charging equipment, tongs or a grab, attached to a trolley, housed in a guide duct, can be used for withdrawing from the core a selected spent fuel assembly or to place a new fuel assembly in the core. In these facilities, the trolley may have wheels that roll on rails in the guide duct. This ensures the correct alignment of the grab, the trolley and fuel assembly when this fuel assembly is being moved. By raising or lowering such a fuel assembly, the trolley can be immerged in the coolant bath of the reactor, whereas at other times it can be at a certain level above the upper surface of the coolant bath. The main object of the invention is to create a fuel handling apparatus for a sodium cooled reactor with bearings lubricated by the sodium coolant and in which the contamination of these bearings is prevented [fr

  13. Solar Charged Stand Alone Inverter

    OpenAIRE

    M.Vasugi; Prof R.Jayaraman

    2014-01-01

    This paper deals with solar powered stand alone inverter which converts the variable dc output of a photovoltaic solar panel into ac that can be fed to loads. Stand alone inverters are used in systems where the inverter get its energy from batteries charged by photo voltaic arrays. A charge controller limits the rate at which electric current is added to or drawn from electric batteries. This charge discharge controller is needed to prevent the battery from being overcharged o...

  14. Experiments on Dust Grain Charging

    Science.gov (United States)

    Abbas, M. N.; Craven, P. D.; Spann, J. F.; Tankosic, D.; LeClair, A.; West, E. A.

    2004-01-01

    Dust particles in various astrophysical environments are charged by a variety of mechanisms generally involving collisional processes with other charged particles and photoelectric emission with UV radiation from nearby sources. The sign and the magnitude of the particle charge are determined by the competition between the charging processes by UV radiation and collisions with charged particles. Knowledge of the particle charges and equilibrium potentials is important for understanding of a number of physical processes. The charge of a dust grain is thus a fundamental parameter that influences the physics of dusty plasmas, processes in the interplanetary medium and interstellar medium, interstellar dust clouds, planetary rings, cometary and outer atmospheres of planets etc. In this paper we present some results of experiments on charging of dust grains carried out on a laboratory facility capable levitating micron size dust grains in an electrodynamic balance in simulated space environments. The charging/discharging experiments were carried out by exposing the dust grains to energetic electron beams and UV radiation. Photoelectric efficiencies and yields of micron size dust grains of SiO2, and lunar simulates obtained from NASA-JSC will be presented.

  15. Fractional Charge Definitions and Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Goldhaber, A.S.

    2004-06-04

    Fractional charge is known through theoretical and experimental discoveries of isolable objects carrying fractions of familiar charge units--electric charge Q, spin S, and the difference of baryon and lepton numbers B-L. With a few simple assumptions all these effects may be described using a generalized version of charge renormalization for locally conserved charges, in which medium correlations yield familiar adiabatic, continuous renormalization, or sometimes nonadiabatic, discrete renormalization. Fractional charges may be carried by fundamental particles or fundamental solitons. Either picture works for the simplest fractional-quantum-Hall-effect quasiholes, though the particle description is far more general. The only known fundamental solitons in three or fewer space dimensions d are the kink (d = 1), the vortex (d = 2), and the magnetic monopole (d = 3). Further, for a charge not intrinsically coupled to the topological charge of a soliton, only the kink and the monopole may carry fractional values. The same reasoning enforces fractional values of B-L for electrically charged elementary particles.

  16. Fractional charge definitions and conditions

    International Nuclear Information System (INIS)

    Goldhaber, Alfred Scharff

    2003-01-01

    The phenomenon of fractional charge has come to prominence in recent decades through theoretical and experimental discoveries of isolable objects which carry fractions of familiar charge units--electric charge Q, spin S, baryon number B and lepton number L. It is shown here on the basis of a few simple assumptions that all these effects may be described using a generalized version of charge renormalization for locally conserved charges, in which many-body correlations can produce familiar adiabatic, continuous renormalization, and in some circumstances nonadiabatic, discrete renormalization. The fractional charges may be carried either by fundamental particles or by fundamental solitons. This excludes nontopological solitons and also skyrmions: The only known fundamental solitons in three or fewer space dimensions d are the kink (d=1), the vortex (d=2), and the magnetic monopole (d=3). Further, for a charge which is not intrinsically coupled to the topological charge of a soliton, only the kink and the monopole may carry fractional values. The same reasoning enforces fractional local values of B-L for electrically charged elementary particles

  17. Fractional Charge Definitions and Conditions

    International Nuclear Information System (INIS)

    Goldhaber, A.S.

    2004-01-01

    Fractional charge is known through theoretical and experimental discoveries of isolable objects carrying fractions of familiar charge units--electric charge Q, spin S, and the difference of baryon and lepton numbers B-L. With a few simple assumptions all these effects may be described using a generalized version of charge renormalization for locally conserved charges, in which medium correlations yield familiar adiabatic, continuous renormalization, or sometimes nonadiabatic, discrete renormalization. Fractional charges may be carried by fundamental particles or fundamental solitons. Either picture works for the simplest fractional-quantum-Hall-effect quasiholes, though the particle description is far more general. The only known fundamental solitons in three or fewer space dimensions d are the kink (d = 1), the vortex (d = 2), and the magnetic monopole (d = 3). Further, for a charge not intrinsically coupled to the topological charge of a soliton, only the kink and the monopole may carry fractional values. The same reasoning enforces fractional values of B-L for electrically charged elementary particles

  18. Low-charge-state linac

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, K.W.; Kim, J.W.

    1995-08-01

    A design is being developed for a low-charge-state linac suitable for injecting ATLAS with a low-charge-state, radioactive beam. Initial work indicates that the existing ATLAS interdigital superconducting accelerating structures, together with the superconducting quadrupole transverse focussing element discussed above, provides a basis for a high-performance low-charge-state linac. The initial 2 or 3 MV of such a linac could be based on a normally-conducting, low-frequency RFQ, possibly combined with 24-MHz superconducting interdigital structures. Beam dynamics studies of the whole low-charge-state post-accelerator section were carried out in early FY 1995.

  19. Charge migration and charge transfer in molecular systems

    Directory of Open Access Journals (Sweden)

    Hans Jakob Wörner

    2017-11-01

    Full Text Available The transfer of charge at the molecular level plays a fundamental role in many areas of chemistry, physics, biology and materials science. Today, more than 60 years after the seminal work of R. A. Marcus, charge transfer is still a very active field of research. An important recent impetus comes from the ability to resolve ever faster temporal events, down to the attosecond time scale. Such a high temporal resolution now offers the possibility to unravel the most elementary quantum dynamics of both electrons and nuclei that participate in the complex process of charge transfer. This review covers recent research that addresses the following questions. Can we reconstruct the migration of charge across a molecule on the atomic length and electronic time scales? Can we use strong laser fields to control charge migration? Can we temporally resolve and understand intramolecular charge transfer in dissociative ionization of small molecules, in transition-metal complexes and in conjugated polymers? Can we tailor molecular systems towards specific charge-transfer processes? What are the time scales of the elementary steps of charge transfer in liquids and nanoparticles? Important new insights into each of these topics, obtained from state-of-the-art ultrafast spectroscopy and/or theoretical methods, are summarized in this review.

  20. Bounds on charged lepton mixing with exotic charged leptons Ф

    Indian Academy of Sciences (India)

    imposing the constraints that the amplitude should not exceed the perturbative unitarity limit at high energy (. Ф. × = A), we obtain bounds on light heavy charged lepton mixing parameter sin. 2. (2 a. L) where a. L is the mixing angle of the ordinary charged lepton with its exotic partner. For A = 1 TeV, no bound is obtained on ...

  1. Charge Pricing Optimization Model for Private Charging Piles in Beijing

    Directory of Open Access Journals (Sweden)

    Xingping Zhang

    2017-11-01

    Full Text Available This paper develops a charge pricing model for private charging piles (PCPs by considering the environmental and economic effects of private electric vehicle (PEV charging energy sources and the impact of PCP charging load on the total load. This model simulates users’ responses to different combinations of peak-valley prices based on the charging power of PCPs and user charging transfer rate. According to the regional power structure, it calculates the real-time coal consumption, carbon dioxide emissions reduction, and power generation costs of PEVs on the power generation side. The empirical results demonstrate that the proposed peak-valley time-of-use charging price can not only minimize the peak-valley difference of the total load but also improve the environmental effects of PEVs and the economic income of the power system. The sensitivity analysis shows that the load-shifting effect of PCPs will be more obvious when magnifying the number of PEVs by using the proposed charging price. The case study indicates that the proposed peak, average, and valley price in Beijing should be 1.8, 1, and 0.4 yuan/kWh, which can promote the large-scale adoption of PEVs.

  2. Intrinsic space charge resonances and the space charge limit

    International Nuclear Information System (INIS)

    Parzen, G.

    1990-01-01

    A study has been done of the dependence of the space charge limit on the choice of ν-values using a simulation program. This study finds a strong dependence of the space charge limit on the location of the ν-values relative to the intrinsic space charge resonances, which are driven by the space charge forces due to the beam itself. Four accelerators were studied. For some of these accelerators the study suggest that the space charge limit can be increased by about a factor of 2 proper choice of the ν-values. The lower order 1/2 and 1/4 intrinsic resonances appear to be the important resonances. There is some evidence for effects due to the 1/6 and 1/8 intrinsic resonances, particularly for larger synchrotrons. 5 figs

  3. Bond charges and electronic charge transfer in ternary semiconductors

    International Nuclear Information System (INIS)

    Pietsch, U.

    1986-01-01

    By means of a simple molecule-theoretic model of 'linear superposition of two-electron molecules' the bond charges between nearest neighbours and the effective charges of ions are calculated for ternary zinc-blende structure alloys as well as chalcopyrite semiconductors. Taking into account both, the charge transfer among the ions caused by the differences of electronegativities of atoms used and between the bonds created by the internal stress of the lattice a nearly unvaried averaged bond charge amount of the alloy is found, but rather dramatically changed local bond charge parameters in comparison with the respective values of binary compounds used. This fact should influence the noncentral force interaction in such semiconductors. (author)

  4. Radiation by moving charges

    International Nuclear Information System (INIS)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2017-04-01

    It is generally accepted that in order to describe the dynamics of relativistic particles in the laboratory (lab) frame it is sufficient to take into account the relativistic dependence of the particle momenta on the velocity. This solution of the dynamics problem in the lab frame makes no reference to Lorentz transformations. For this reason they are not discussed in particle tracking calculations in accelerator and plasma physics. It is generally believed that the electrodynamics problem can be treated within the same ''single inertial frame'' description without reference to Lorentz transformations. In particular, in order to evaluate radiation fields arising from charged particles in motion we need to know their velocities and positions as a function of the lab frame time t. The relativistic motion of a particle in the lab frame is described by Newton's second law ''corrected'' for the relativistic dependence of momentum on velocity. It is assumed in all standard derivations that one can perform identification of the trajectories in the source part of the usual Maxwell's equations with the trajectories vector x(t) measured (or calculated by using the corrected Newton's second law) in the lab frame. This way of coupling fields and particles is considered since more than a century as the relativistically correct procedure.We argue that this procedure needs to be changed, and we demonstrate the following, completely counterintuitive statement: the results of conventional theory of radiation by relativistically moving charges are not consistent with the principle of relativity. In order to find the trajectory of a particle in the lab frame consistent with the usual Maxwell's equations, one needs to solve the dynamic equation inmanifestly covariant form by using the coordinate-independent proper time τ to parameterize the particle world-line in space-time. We show that there is a difference between ''true'' particle trajectory vector x(t) calculated or measured in

  5. Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Volume 5: Analysis of core damage frequency from seismic events for plant operational state 5 during a refueling outage

    International Nuclear Information System (INIS)

    Budnitz, R.J.; Davis, P.R.; Ravindra, M.K.; Tong, W.H.

    1994-08-01

    In 1989 the US Nuclear Regulatory Commission (NRC) initiated an extensive program to examine carefully the potential risks during low-power and shutdown operations. The program included two parallel projects, one at Sandia National Laboratories studying a boiling water reactor (Grand Gulf), and the other at Brookhaven National Laboratory studying a pressurized water reactor (Surry Unit 1). Both the Sandia and Brookhaven projects have examined only accidents initiated by internal plant faults---so-called ''internal initiators.'' This project, which has explored the likelihood of seismic-initiated core damage accidents during refueling outage conditions, is complementary to the internal-initiator analyses at Brookhaven and Sandia. This report covers the seismic analysis at Grand Gulf. All of the many systems modeling assumptions, component non-seismic failure rates, and human effort rates that were used in the internal-initiator study at Grand Gulf have been adopted here, so that the results of the study can be as comparable as possible. Both the Sandia study and this study examine only one shutdown plant operating state (POS) at Grand Gulf, namely POS 5 representing cold shutdown during a refueling outage. This analysis has been limited to work analogous to a level-1 seismic PRA, in which estimates have been developed for the core-damage frequency from seismic events during POS 5. The results of the analysis are that the core-damage frequency for earthquake-initiated accidents during refueling outages in POS 5 is found to be quite low in absolute terms, less than 10 -7 /year

  6. Initial charge reactor core

    International Nuclear Information System (INIS)

    Kiyono, Takeshi

    1984-01-01

    Purpose: To effectivity burn fuels and improve the economical performance in an inital charge reactor core of BWR type reactors or the likes. Constitution: In a reactor core constituted with a plurality of fuel assemblies which are to be partially replaced upon fuel replacement, the density of the fissionable materials and the moderator - fuel ratio of a fuel assembly is set corresponding to the period till that fuel assembly is replaced, in which the density of the nuclear fissionable materials is lowered and the moderator - fuel ratio is increased for the fuel assembly with a shorter period from the fueling to the fuel exchange and, while on the other hand, the density of the fissionable materials is increased and the moderator - fuel ratio is decreased for the fuel assembly with a longer period from the fueling to the replacement. Accordingly, since the moderator - fuel ratio is increased for the fuel assembly to be replaced in a shorter period, the neutrons moderating effect is increased to increase the reactivity. (Horiuchi, T.)

  7. Charged particle accelerator

    International Nuclear Information System (INIS)

    Arakawa, Kazuo.

    1969-01-01

    An accelerator is disclosed having a device which permits the electrodes of an accelerator tube to be readily conditioned in an uncomplicated manner before commencing operation. In particle accelerators, it is necessary to condition the accelerator electrodes before a stable high voltage can be applied. Large current accelerators of the cockcroft-walton type require a complicated manual operation which entails applying to the electrodes a low voltage which is gradually increased to induce a vacuum discharge and then terminated. When the discharge attains an extremely low level, the voltage is again impressed and again raised to a high value in low current type accelerators, a high voltage power supply charges the electrodes once to induce discharge followed by reapplying the voltage when the vacuum discharge reaches a low level, according to which high voltage is automatically applied. This procedure, however, requires that the high voltage power supply be provided with a large internal resistance to limit the current to within several milliamps. The present invention connects a high voltage power supply and an accelerator tube through a discharge current limiting resistor wired in parallel with a switch. Initially, the switch is opened enabling the power supply to impress a voltage limited to a prescribed value by a suitably chosen resistor. Conditioning is effected by allowing the voltage between electrodes to increase and is followed by closing the switch through which high voltage is applied directly to the accelerator for operation. (K.J. Owens)

  8. Quantum charged rigid membrane

    Energy Technology Data Exchange (ETDEWEB)

    Cordero, Ruben [Departamento de Fisica, Escuela Superior de Fisica y Matematicas del I.P.N., Unidad Adolfo Lopez Mateos, Edificio 9, 07738 Mexico, D.F. (Mexico); Molgado, Alberto [Unidad Academica de Fisica, Universidad Autonoma de Zacatecas, Zacatecas Zac. (Mexico); Rojas, Efrain, E-mail: cordero@esfm.ipn.mx, E-mail: amolgado@fisica.uaz.edu.mx, E-mail: efrojas@uv.mx [Departamento de Fisica, Facultad de Fisica e Inteligencia Artificial, Universidad Veracruzana, 91000 Xalapa, Veracruz (Mexico)

    2011-03-21

    The early Dirac proposal to model the electron as a charged membrane is reviewed. A rigidity term, instead of the natural membrane tension, involving linearly the extrinsic curvature of the worldvolume swept out by the membrane is considered in the action modeling the bubble in the presence of an electromagnetic field. We set up this model as a genuine second-order derivative theory by considering a non-trivial boundary term which plays a relevant part in our formulation. The Lagrangian in question is linear in the bubble acceleration and by means of the Ostrogradski-Hamiltonian approach, we observed that the theory comprises the management of both first- and second-class constraints. We thus show that our second-order approach is robust allowing for a proper quantization. We found an effective quantum potential which permits us to compute bounded states for the system. We comment on the possibility of describing brane world universes by invoking this kind of second-order correction terms.

  9. Quantum charged rigid membrane

    International Nuclear Information System (INIS)

    Cordero, Ruben; Molgado, Alberto; Rojas, Efrain

    2011-01-01

    The early Dirac proposal to model the electron as a charged membrane is reviewed. A rigidity term, instead of the natural membrane tension, involving linearly the extrinsic curvature of the worldvolume swept out by the membrane is considered in the action modeling the bubble in the presence of an electromagnetic field. We set up this model as a genuine second-order derivative theory by considering a non-trivial boundary term which plays a relevant part in our formulation. The Lagrangian in question is linear in the bubble acceleration and by means of the Ostrogradski-Hamiltonian approach, we observed that the theory comprises the management of both first- and second-class constraints. We thus show that our second-order approach is robust allowing for a proper quantization. We found an effective quantum potential which permits us to compute bounded states for the system. We comment on the possibility of describing brane world universes by invoking this kind of second-order correction terms.

  10. Cathodic hydrogen charging of zinc

    International Nuclear Information System (INIS)

    Panagopoulos, C.N.; Georgiou, E.P.; Chaliampalias, D.

    2014-01-01

    Highlights: •Incorporation of hydrogen into zinc and formation of zinc hydrides. •Investigation of surface residual stresses due to hydrogen diffusion. •Effect of hydrogen diffusion and hydride formation on mechanical properties of Zn. •Hydrogen embrittlement phenomena in zinc. -- Abstract: The effect of cathodic hydrogen charging on the structural and mechanical characteristics of zinc was investigated. Hardening of the surface layers of zinc, due to hydrogen incorporation and possible formation of ZnH 2 , was observed. In addition, the residual stresses brought about by the incorporation of hydrogen atoms into the metallic matrix, were calculated by analyzing the obtained X-ray diffraction patterns. Tensile testing of the as-received and hydrogen charged specimens revealed that the ductility of zinc decreased significantly with increasing hydrogen charging time, for a constant value of charging current density, and with increasing charging current density, for a constant value of charging time. However, the ultimate tensile strength of this material was slightly affected by the hydrogen charging procedure. The cathodically charged zinc exhibited brittle transgranular fracture at the surface layers and ductile intergranular fracture at the deeper layers of the material

  11. Filling of charged cylindrical capillaries

    NARCIS (Netherlands)

    Das, Siddhartha; Chanda, Sourayon; Eijkel, J.C.T.; Tas, N.R.; Chakraborty, Suman; Mitra, Sushanta K.

    2014-01-01

    We provide an analytical model to describe the filling dynamics of horizontal cylindrical capillaries having charged walls. The presence of surface charge leads to two distinct effects: It leads to a retarding electrical force on the liquid column and also causes a reduced viscous drag force because

  12. Charge transport in organic semiconductors.

    Science.gov (United States)

    Bässler, Heinz; Köhler, Anna

    2012-01-01

    Modern optoelectronic devices, such as light-emitting diodes, field-effect transistors and organic solar cells require well controlled motion of charges for their efficient operation. The understanding of the processes that determine charge transport is therefore of paramount importance for designing materials with improved structure-property relationships. Before discussing different regimes of charge transport in organic semiconductors, we present a brief introduction into the conceptual framework in which we interpret the relevant photophysical processes. That is, we compare a molecular picture of electronic excitations against the Su-Schrieffer-Heeger semiconductor band model. After a brief description of experimental techniques needed to measure charge mobilities, we then elaborate on the parameters controlling charge transport in technologically relevant materials. Thus, we consider the influences of electronic coupling between molecular units, disorder, polaronic effects and space charge. A particular focus is given to the recent progress made in understanding charge transport on short time scales and short length scales. The mechanism for charge injection is briefly addressed towards the end of this chapter.

  13. Geometric origin of central charges

    International Nuclear Information System (INIS)

    Lukierski, J.; Rytel, L.

    1981-05-01

    The complete set of N(N-1) central charge generators for D=4 N-extended super Poincare algebra is obtained by suitable contraction of OSp (2N; 4) superalgebra. The superspace realizations of the spinorial generators with central charges are derived. The conjugate set of N(N-1) additional bosonic superspace coordinates is introduced in an unique and geometric way. (author)

  14. Environmental charges in airline markets

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, Fredrik [Goeteborg Univ., Dept. of Economics, Goeteborg (Sweden)

    2002-07-01

    Over the last two decades many airline markets have been deregulated, resulting in increased competition and use of different types of networks. At the same time there has been an intense discussion on environmental taxation of airline traffic. It is likely that an optimal environmental charge and the effects of a charge differ between different types of aviation markets. In this paper, we derive optimal flight (environmental) charges for different types of airline markets. The first type of market is a multiproduct monopoly airline operating either a point-to-point network or a hub-and-spoke network. The optimal charge is shown to be similar in construction to an optimal charge for a monopolist. We also compare the environmental impact of the two types of networks. Given no differences in marginal damages between airports we find that an airline will always choose the network with the highest environmental damages. The second type of market we investigate is a multiproduct duopoly, where two airlines compete in both passengers and flights. The formulation of the optimal charge is similar to the optimal charge of a single product oligopoly. However, we also show that it is, because of strategic effects, difficult to determine the effects of the charge on the number of flights. (Author)

  15. Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1. Analysis of core damage frequency from internal events for plant operational state 5 during a refueling outage. Internal events appendices K to M

    International Nuclear Information System (INIS)

    Forester, J.; Yakle, J.; Walsh, B.; Darby, J.; Whitehead, D.; Staple, B.; Brown, T.

    1994-07-01

    This report provides supporting documentation for various tasks associated with the performance of the probabilistic risk assessment for Plant Operational State 5 (approximately Cold Shutdown as defined by Grand Gulf Technical Specifications) during a refueling outage at Grand Gulf, Unit 1 as documented in Volume 2, Part 1 of NUREG/CR-6143. The report contains the following appendices: K - HEP Locator Files; L - Supporting Information for the Plant Damage State Analysis; M - Summary of Results from the Coarse Screening Analysis - Phase 1A

  16. LINK2009 Phase 1: Development of 2. generation fuel cell vehicles and hydrogen refueling station. Final report; LINK2009 fase 1: Udvikling af 2. gen. braendselscelle koeretoejer og brinttankstation. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    2010-03-15

    LINK2009 project was to develop 2nd gen. technologies fuel cell systems for vehicles and 350bar hydrogen refueling stations. Also the LINK2009 project were to ensure a continuously positioning of Denmark and the Scandinavian Region within hydrogen for transport and continue to attract international car manufacturers to conduct demonstration and later market introduction in the region. The LINK2009 project is divided in two phases where this first phase only deals with the development of the 2nd generation technologies, whereas the following phase 2 will include the demonstration hereof as well as additional research activities. This Report describes the results of the phase 1 that was commenced in summer 2008 and ended in late 2009. Phase 1 has resulted in the development of new 2nd generation fuel cell technology for use in a city car and a service vehicle. Stated targets for price and efficiency have been reached and the following demonstration in Phase 2 is to confirm reaching of life time targets. The efficiency of the fuel cell system for the city car has been measured to be 42-48% at a power delivery of respectively 10kW and 2kW, which is significantly above the target of >40%. System simplifications and selection of new components have enabled a 50% reduction in the kW price for the fuel cell system, including 700bar hydrogen storage, now totalling Euro 4.500/kW. This creates sufficient basis for conducting demonstration of the system in vehicles. 9 vehicles are planned to be demonstrated in the following phase 2. Additional 8 vehicles were put in operation in Copenhagen in November 2009. Phase 1 has conducted development of 2nd gen. hydrogen refuelling technology that has resulted in concepts for both 350bar and 700bar refuelling as well as a concept for onsite hydrogen production at refuelling stations. In separate projects the developed 350bar technology has been brought to use in a newly established hydrogen station in Copenhagen, and the hydrogen

  17. Evaluation of potential severe accidents during low power and shutdown operations at Grand Gulf, Unit 1: Analysis of core damage frequency from internally induced flooding events for Plant Operational State 5 during a refueling outage. Volume 4

    International Nuclear Information System (INIS)

    Dandini, V.; Staple, B.; Kirk, H.; Whitehead, D.; Forester, J.

    1994-07-01

    An estimate of the contribution of internal flooding to the mean core damage frequency at the Grand Gulf Nuclear Station was calculated for Plant Operational State 5 during a refueling outage. Pursuant to this objective, flood zones and sources were identified and flood volumes were calculated. Equipment necessary for the maintenance of plant safety was identified and its vulnerability to flooding was determined. Event trees and fault trees were modified or developed as required, and PRA quantification was performed using the IRRAS code. The mean core damage frequency estimate for GGNS during POS 5 was found to be 2.3 E-8 per year

  18. Charge Master: Friend or Foe?

    Science.gov (United States)

    Wan, Wenshuai; Itri, Jason

    2016-01-01

    Prices charged for imaging services can be found in the charge master, a catalog of retail list prices for medical goods and services. This article reviews the evolution of reimbursement in the United States and provides a balanced discussion of the factors that influence charge master prices. Reduced payments to hospitals have pressured hospitals to generate additional revenue by increasing charge master prices. An unfortunate consequence is that those least able to pay for health care, the uninsured, are subjected to the highest charges. Yet, differences in pricing also represent an opportunity for radiology practices, which provide imaging services that are larger in scope or superior in quality to promote product differentiation. Physicians, hospital executives, and policy makers need to work together to improve the existing reimbursement system to promote high-quality, low-cost imaging. Copyright © 2016 Mosby, Inc. All rights reserved.

  19. Search for free fractional charge

    International Nuclear Information System (INIS)

    Heilig, S.J.

    1985-01-01

    Recent results of searches for free fractional charge have been null with the exception of the experiment at Stanford under the leadership of W. Fairbank. His experiment, while claiming the observation of free fractional charge, has yet to show that this observation was not spurious. The need for a confirming experiment with a different physical system is the motivation for the current work. A torsional pendulum has been constructed of a fused silica fiber with an attached fused silica crossbar. A transverse electric field is applied to the end of the crossbar, and the resulting deflection of the crossbar is used to measure the torque applied by the field. To date the limit of measurement for the charge on the crossbar (without sample) is 0 +/- 24 electronic charges. The history of this experiment is discussed, along with plans for pushing the limits of measurement to below the single-charge level

  20. Portable refrigerant charge meter and method for determining the actual refrigerant charge in HVAC systems

    Science.gov (United States)

    Gao, Zhiming; Abdelaziz, Omar; LaClair, Tim L.

    2017-08-08

    A refrigerant charge meter and a method for determining the actual refrigerant charge in HVAC systems are described. The meter includes means for determining an optimum refrigerant charge from system subcooling and system component parameters. The meter also includes means for determining the ratio of the actual refrigerant charge to the optimum refrigerant charge. Finally, the meter includes means for determining the actual refrigerant charge from the optimum refrigerant charge and the ratio of the actual refrigerant charge to the optimum refrigerant charge.