WorldWideScience

Sample records for refinishing industry iii

  1. Automotive Refinishing Industry: Isocyanates Profile

    Science.gov (United States)

    The isocyanates profile document is part of the DfE Auto Refinishing Shop Project and is intended to provide information on refinishing, control technologies, and regulatory status regarding isocyanate compounds

  2. NONPROCESS SOLVENT USE IN THE FURNITURE REFINISHING AND REPAIR INDUSTRY: EVALUATION OF ALTERNATIVE CHEMICAL STRIPPERS

    Science.gov (United States)

    The report gives results of an evaluation of the feasibility of using alternatives to high volatile organic compound/hazardous air pollutant (VOC/HAP) solvent-based, chemical strippers that are currently used in the furniture repair and refinishing industry to remove both traditi...

  3. A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

    Science.gov (United States)

    Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

    2008-01-01

    The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

  4. Refinishing contamination floors in Spent Nuclear Fuels storage basins

    International Nuclear Information System (INIS)

    Huang, F.F.; Moore, F.W.

    1997-01-01

    The floors of the K Basins at the Hanford Site are refinished to make decontamination easier if spills occur as the spent nuclear fuel (SNF) is being unloaded from the basins for shipment to dry storage. Without removing the contaminated existing coating, the basin floors are to be coated with an epoxy coating material selected on the basis of the results of field tests of several paint products. The floor refinishing activities must be reviewed by a management review board to ensure that work can be performed in a controlled manner. Major documents prepared for management board review include a report on maintaining radiation exposure as low as reasonably achievable, a waste management plan, and reports on hazard classification and unreviewed safety questions. To protect personnel working in the radiation zone, Operational Health Physics prescribed the required minimum protective methods and devices in the radiological work permit. Also, industrial hygiene safety must be analyzed to establish respirator requirements for persons working in the basins. The procedure and requirements for the refinishing work are detailed in a work package approved by all safety engineers. After the refinishing work is completed, waste materials generated from the refinishing work must be disposed of according to the waste management plan

  5. Lead exposures from varnished floor refinishing.

    Science.gov (United States)

    Schirmer, Joseph; Havlena, Jeff; Jacobs, David E; Dixon, Sherry; Ikens, Robert

    2012-01-01

    We evaluated the presence of lead in varnish and factors predicting lead exposure from floor refinishing and inexpensive dust suppression control methods. Lead in varnish, settled dust, and air were measured using XRF, laboratory analysis of scrape and wipe samples, and National Institute for Occupational Safety and Health (NIOSH) Method 7300, respectively, during refinishing (n = 35 homes). Data were analyzed using step-wise logistic regression. Compared with federal standards, no lead in varnish samples exceeded 1.0 mg/cm(2), but 52% exceeded 5000 ppm and 70% of settled dust samples after refinishing exceeded 40 μg/ft(2). Refinishing pre-1930 dwellings or stairs predicted high lead dust on floors. Laboratory analysis of lead in varnish was significantly correlated with airborne lead (r = 0.23, p = 0.014). Adding dust collection bags into drum sanders and HEPA vacuums to edgers and buffers reduced mean floor lead dust by 8293 μg Pb/ft(2) (pairborne lead exposures to less than 50 μg/m(3). Refinishing varnished surfaces in older housing produces high but controllable lead exposures.

  6. Assessment of heavy metal exposure around auto body refinishing ...

    African Journals Online (AJOL)

    Significant number of occupations are present in our society which involves metal pollution. These small operational occupations which are always neglected by governments and other occupational health services are another major factor of metal flow in urban soil. The local auto body refinishing shops are one of these ...

  7. Redevelopment to Preserve Industrial Heritage. Appendix III

    International Nuclear Information System (INIS)

    2011-01-01

    Industrial archaeology, which emerged as a discipline in the 1950s, was first concerned with interpretation of surviving physical evidence to understand past human activity. Later on, and for the purposes of this report, it was recognized as a preservation movement concerned with ensuring the survival of a significant proportion of the industrial monuments of the past. In the latter sense, 'industrial heritage' was coined and the two terms 'industrial archaeology' and 'industrial heritage' are often taken to be synonymous. The traditional building blocks of heritage protection have been different types of assets: listed buildings, scheduled ancient monuments, areas of architectural and historic interest, or protected landscapes. Yet, it can be difficult to draw lines around what is important when a building sits in a landscape that is in turn part of a wider area. The idea of historic environment enables us to look at places as a whole. It also brings heritage closer to environmental thinking, since some of the same ideas about management, diversity and sustainability read across to a more environmental approach. Moreover, the wider values of the heritage should be recognized - as a learning resource, a social resource that involves people, as part of the environment and as a contributor to the economy. This is particularly important, since it signals a move away from heritage as a narrow, specialist interest, to recognizing that it is something that has relevance to many areas of modern life. Nevertheless, the idea of a historic environment with broad-ranging social and cultural values as well as historical value raises a number of problems. How, then, can society function, the economy develop or people live their lives effectively if this is followed? The key lies not so much in what is protected, but in how change occurs. The challenge for anyone operating the system is rather one of how to manage change: how to ensure that what is important is kept for future

  8. Scratch- and mar-resistant refinish two-pack clear coats – linear versus branched acrylics

    Czech Academy of Sciences Publication Activity Database

    Huybrechts, J.; Vaes, A.; Dušek, Karel; Dušková, Miroslava; Barsotti, R. J.

    2006-01-01

    Roč. 89, B4 (2006), s. 275-283 ISSN 1476-4865 Institutional research plan: CEZ:AV0Z40500505 Keywords : scratch resistance * mar resistance * refinishing two-pack clear coats Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.338, year: 2006

  9. Porcelain surface alterations and refinishing after use of two orthodontic bonding methods.

    Science.gov (United States)

    Herion, Drew T; Ferracane, Jack L; Covell, David A

    2010-01-01

    To compare porcelain surfaces at debonding after use of two surface preparation methods and to evaluate a method for restoring the surface. Lava Ceram feldspathic porcelain discs (n = 40) underwent one of two surface treatments prior to bonding orthodontic brackets. Half the discs had sandblasting, hydrofluoric acid, and silane (SB + HF + S), and the other half, phosphoric acid and silane (PA + S). Brackets were debonded using bracket removing pliers, and resin was removed with a 12-fluted carbide bur. The surface was refinished using a porcelain polishing kit, followed by diamond polishing paste. Measurements for surface roughness (Ra), gloss, and color were made before bonding (baseline), after debonding, and after each step of refinishing. Surfaces were also examined by scanning electron microscopy (SEM). Data was analyzed with 2-way ANOVA followed by Tukey HSD tests (alpha = 0.05). The SB + HF + S bonding method increased Ra (0.160 to 1.121 microm), decreased gloss (41.3 to 3.7) and altered color (DeltaE = 4.37; P gloss (41.7 to 38.0) and color (DeltaE = 0.50). The measurements and SEM observations showed that changes were fully restored to baseline with refinishing. The PA + S method caused significantly less damage to porcelain than the SB + HF + S method. The refinishing protocol fully restored the porcelain surfaces.

  10. Trade and Industrial Policy Strategies (TIPS) - Phase III | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Trade and Industrial Policy Strategies (TIPS) is an network of researchers ... bring the quality of research done locally closer to international best practice. ... the Real Economy Study and a program of work on the economics of education.

  11. Trade and Industrial Policy Strategies (TIPS) - phase III | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Établi en 1996, le réseau de chercheurs de l'organisme Trade and Industrial Policy Strategies (TIPS) souhaite fournir au gouvernement de l'Afrique du Sud, à la société civile et à la région des conseils impartiaux en matière de politiques économiques, particulièrement celles portant sur les questions commerciales et ...

  12. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: HVLP COATING EQUIPMENT, ITW AUTOMOTIVE REFINISHING, DEVILBISS FLG-631-318 HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the DeVilbiss FLG-631-318 high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the DeVilbiss FLG, which is designed for use in automotive refinishing. The test coating chosen by ITW Automotive Refi...

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: HVLP COATING EQUIPMENT, ITW AUTOMOTIVE REFINISHING, DEVILBISS GTI-600G, HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the DeVilbiss GTi-600G high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the DeVilbiss GTi, which is designed for use in automotive refinishing. The test coating chosen by ITW Automotive Refinis...

  14. Removal of chromium(III) from tannery wastewater using activated carbon from sugar industrial waste.

    Science.gov (United States)

    Fahim, N F; Barsoum, B N; Eid, A E; Khalil, M S

    2006-08-21

    Chromium is commonly found in huge quantities in tannery wastewaters. For this reason, the removal and recovery of the chromium content of tannery wastewaters is crucial for environmental protection and economic reasons. Removal and recovery of chromium were carried out by using low-cost potential adsorbents. For this purpose three types of activated carbon; C1, the waste generated from sugar industry as waste products and the others (C2, C3) are commercial granular activated carbon, were used. The adsorption process and extent of adsorption are dependent on the physical and chemical characteristics of the adsorbent, adsorbate and experimental condition. The effect of pH, particle size and different adsorbent on the adsorption isotherm of Cr(III) was studied in batch system. The sorption data fitted well with Langmuir adsorption model. The efficiencies of activated carbon for the removal of Cr(III) were found to be 98.86, 98.6 and 93 % for C1, C2 and C3, respectively. The order of selectivity is C1>C2>C3 for removal of Cr(III) from tannery wastewater. Carbon "C1" of the highest surface area (520.66 m(2)/g) and calcium content (333.3 mg/l) has the highest adsorptive capacity for removal of Cr(III). The results revealed that the trivalent chromium is significantly adsorbed on activated carbon collected from sugar industry as waste products and the method could be used economically as an efficient technique for removal of Cr(III) and purification of tannery wastewaters.

  15. Respiratory protection from isocyanate exposure in the autobody repair and refinishing industry.

    Science.gov (United States)

    Liu, Youcheng; Stowe, Meredith H; Bello, Dhimiter; Woskie, Susan R; Sparer, Judy; Gore, Rebecca; Youngs, Fred; Cullen, Mark R; Redlich, Carrie A

    2006-05-01

    This study, part of the Survey of Painters and Repairers of Auto bodies by Yale (SPRAY), evaluated the effectiveness of respiratory protection against exposure to aliphatic polyisocyanates. A total of 36 shops were assessed for respiratory protection program completeness; 142 workers were measured for respirator fit factor (FF) using PortaCount Plus respirator fit tester. Twenty-two painters from 21 shops were sampled using NIOSH method 5525 to determine the workplace protection factor (WPF) of negative pressure, air-purifying half-facepiece respirators equipped with organic vapor cartridges and paint prefilters during spray-painting and priming activities. Only 11 shops (30%) had written respiratory protection programs. Eighty percent of all fit tested workers passed the test on the first try with FF >or= 100, and 92% passed the second test after respirator use training. Overall geometric mean (GM) FF was 1012 for all fit tested workers. Significant differences on pass rate (92% vs. 72%) and on FF (1990 vs. 736) were found between previously fit tested workers vs. nontested workers. Twenty-nine WPF samples were collected. The outside facepiece GM concentration of total isocyanate group (NCO) was 378.4 micro g NCO/m(3) with 96% concentrations exceeding the U.K. short-term exposure limit, 70 micro g NCO/m(3), but no in-facepiece concentrations exceeded the limit. The GM WPF of total NCO was 319 (GSD 4) and the 5th percentile was 54. WPF of total NCO was positively correlated with the duration of painting task. FF positively correlated with WPF when FF was 450. We conclude that negative pressure, air-purifying half-facepiece respirators equipped with organic vapor cartridges and paint prefilters provide effective protection against isocyanate exposure in spray and priming operations if workers are properly trained and fitted.

  16. Progress report: The Energy and Industry Subgroup of IPCC Working Group III

    International Nuclear Information System (INIS)

    Yokobori, Keiichi

    1990-01-01

    The Intergovernmental Panel on Climate Change (IPCC) was established in November 1988 under the joint auspices of UNEP and the World Meteorological Organization (WMO). Working Group III, or the Response Strategies Working Group (RSWG), was established to formulate strategies to respond to challenges arising from global climate warming. The Energy and Industry Subgroup (EIS) was created by the RSWG at its meeting in January-February 1989 to facilitate the formulation of strategies to control, i.e. prevent or reduce, the accumulation of greenhouse gases (GHGs) such as CO 2 , CFCs, NO 2 , CH, etc. The following article gives a brief summary of EIS activities, based mainly on records of discussion at the relevant meetings. (author). 1 tab

  17. Power production from biomass III. Gasification and pyrolysis R and D and D for industry

    Energy Technology Data Exchange (ETDEWEB)

    Sipilae, K.; Korhonen, M. [eds.] [VTT Energy, Espoo (Finland). New Energy Technologies

    1999-07-01

    The Seminar on Power Production from Biomass III. Gasification and Pyrolysis R and D and D for Industry, was held on 14-15 September 1998 in Espoo. The seminar was organised by VTT Energy in co-operation with the University of Groningen, EU-Thermie Programme and Technology Development Centre, Finland (Tekes). Overviews of current activities on power production from biomass and wastes in Europe and in the United States were given, and all European and U. S. demonstration projects on biomass gasification were presented. In Europe, the target is to produce additional 90 Mtoe/a of bioenergy for the market by 2010. This is a huge challenge for the bioenergy sector, including biomass production and harvesting, conversion technology, energy companies, and end users. In USA, U.S. Department of Energy is promoting the Biomass Power Programme to encourage and assist industry in the development and validation of renewable, biomass-based electricity generation systems, the objective being to double the present use of 7 000 MW biomass power by the year 2010. The new Finnish PROGAS Programme initiated by VTT was also introduced. Several gasification projects are today on the demonstration stage prior to entering the commercial level. Pyrolysis technologies are not yet on the demonstration stage on the energy market. Bio-oils can easily be transported, stored and utilised in existing boiler and diesel plants. The proceedings include the presentations given by the keynote speakers and other invited speakers, as well as some extended poster presentations. (orig.)

  18. Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

  19. Microbial conversion of Cr (VI) in to Cr (III) in industrial effluent ...

    African Journals Online (AJOL)

    These bacterial strains also take up and reduce Cr (VI) present in industrial effluents, and their reduction potential was not significantly affected in the presence of different metallic salts. Key Words: Cr (VI) reduction, bacteria, industrial effluent, heavy metals. African Journal of Biotechnology Vol.3(11) 2004: 610-617 ...

  20. Field Operations and Enforcement Manual for Air Pollution Control. Volume III: Inspection Procedures for Specific Industries.

    Science.gov (United States)

    Weisburd, Melvin I.

    The Field Operations and Enforcement Manual for Air Pollution Control, Volume III, explains in detail the following: inspection procedures for specific sources, kraft pulp mills, animal rendering, steel mill furnaces, coking operations, petroleum refineries, chemical plants, non-ferrous smelting and refining, foundries, cement plants, aluminum…

  1. Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

  2. Petroleum industry in Latin America: volume III Argentina, Bolivia, Mexico, Peru

    International Nuclear Information System (INIS)

    Reinsch, A.E.; Tissot, R.R.

    1995-01-01

    As the previous volume in this series, this concluding volume was divided into separately paged sections, one for each of Argentina, Bolivia, Mexico and Peru, each section being complete in itself. For each of the countries dealt with, there was a brief historical introduction, followed by a detailed analysis of its energy sector, a description of the physical and market characteristics, the transportation and infrastructure systems, the legal and regulatory issues pertaining to the petroleum industry, especially as regards investment and environmental requirements, and an analysis of the prevailing political climate. figs., tabs., refs

  3. Skin exposure to aliphatic polyisocyanates in the auto body repair and refinishing industry: II. A quantitative assessment.

    Science.gov (United States)

    Bello, Dhimiter; Redlich, Carrie A; Stowe, Meredith H; Sparer, Judy; Woskie, Susan R; Streicher, Robert P; Hosgood, H Dean; Liu, Youcheng

    2008-03-01

    Skin exposure to isocyanates, in addition to respiratory exposures, may contribute to sensitization and asthma. Quantitative skin exposure data are scarce and quantitative methods limited. As part of the Survey of Painters and Repairers of Autobodies by Yale study, a method to sample and quantify human isocyanate skin exposure was developed (based on NIOSH 5525 method) and used to evaluate aliphatic isocyanate skin exposure in 81 auto body shop painters and body technicians. Wipe samples were collected from unprotected skin and from under PPE (gloves, clothing and respirator) using a polypropylene glycol-impregnated wipe. Hexamethylene diisocyanate (HDI), its polyisocyanates [HDI-derived polyisocyanates (pHDI)], isophorone diisocyanate (IPDI) and its polyisocyanates and IPDI-derived polyisocyanates (pIPDI) were quantified separately and also expressed as the total free isocyanate groups (total NCO). For unprotected skin areas, 49 samples were collected for spray painting, 13 for mixing, 27 for paint-related tasks (e.g. sanding and compounding) and 53 for non-paint-related tasks. Forty-three samples were also collected under PPE. The geometric mean (GM) [geometric standard deviation (GSD)] total NCO concentrations (ng NCO cm(-2)) for unprotected skin (hands, face and forearms) was 1.9 (10.9) and range 0.0-64.4. pHDI species were the major contributor to the total NCO content. Levels were very variable, with the highest concentrations measured for clear coating and paint mixing tasks. Isocyanate skin exposure was also commonly detected under PPE, with 92% of samples above the limit of detection. Levels were very variable with the overall GM (GSD) total NCO (ng NCO cm(-2)) under PPE 1.0 (5.2) and range (0.0-47.0) and similar under the different PPE (glove, respirator and clothing). The highest concentrations were detected for mixing and spraying tasks, 6.9 (5.3) and 1.0 (5.2), respectively. Levels under PPE were generally lower than unpaired samples obtained with no PPE, but not statistically significant. Total isocyanate GM load on exposed skin and under PPE was commonly 100-300 ng NCO per sample, except for higher levels on exposed forearms during spraying (GM 5.9 mug NCO). A quantitative method was developed for skin sampling of isocyanates. Using this method, the study demonstrates that skin exposure to aliphatic polyisocyanates during painting, mixing and paint-related tasks in auto body shop workers is common and also commonly detected under routine PPE.

  4. Advances in refractories for the metallurgical industries III: proceedings of the international symposium

    Energy Technology Data Exchange (ETDEWEB)

    Allaire, C.; Rigaud, M. [eds.] [Ecole Polytchnique, Montreal, PQ (Canada)

    1999-07-01

    In the three years since the last symposium key innovations have been made in the penetration of monoliths in all sectors of the metallurgical industries. The symposium was presented within the 38th Annual Conference of Metallurgists of the Canadian Institute of Mining, Metallurgy and Petroleum. Broad international coverage was maintained with papers originating from 12 different countries including: Australia, Canada, China, France, Germany, India, Iran, Japan, Korea, Mexico, New Zealand, Norway, and the United States. The 27 papers presented are divided into seven sessions to reflect the interests of the participants. The sessions included mold fluxes I and II, aluminum refractories, alumina castables, andalusite castables, continuous casting of refractories, aluminum refractories II and copper-nickel refineries. One paper on refractories for exhaust gas scrubbers is abstracted separately.

  5. THE UTILIZATION OF Fe(III WASTE OF ETCHING INDUSTRY AS QUALITY ENHANCHEMENT MATERIAL IN CERAMIC ROOFTILE SYNTHESIS

    Directory of Open Access Journals (Sweden)

    Eva Vaulina Yulistia Delsy

    2015-11-01

    Full Text Available Waste is produced from various industrial activities. FeCl3 used in this study as an addition to the material quality in synthesis of ceramic rooftile from Kalijaran village clay, Purbalingga. Etching industrial waste FeCl3 contacted with clay. Waste being varied waste as diluted and undiluted while clay grain size varied as 60, 80, 100, 140, and 230 mesh. Both clay and waste are contacted at 30-100 minutes. The results showed that the optimum of time and grain size variation is clay with 80 mesh grain size within 70 minutes. While physical properties of the rooftile contained Fe meet all ISO standards and are known to tile, the best quality is to use clay that has been in contact with the waste that is created 1000 times dilution. The stripping test of Fe (III by rain water and sea water showed that the average rate of Fe-striped of the tile body that is made with soaked with diluted waste are 0.068 ppm/day and 0.055 ppm/day while for tile bodies soaked with waste is not diluted are 0.0722 ppm/day and 0.0560 ppm/day.

  6. Industrial Fuel Gas Demonstration Plant Program. Conceptual design and evaluation of commercial plant. Volume III. Economic analyses (Deliverable Nos. 15 and 16)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    This report presents the results of Task I of Phase I in the form of a Conceptual Design and Evaluation of Commercial Plant report. The report is presented in four volumes as follows: I - Executive Summary, II - Commercial Plant Design, III - Economic Analyses, IV - Demonstration Plant Recommendations. Volume III presents the economic analyses for the commercial plant and the supporting data. General cost and financing factors used in the analyses are tabulated. Three financing modes are considered. The product gas cost calculation procedure is identified and appendices present computer inputs and sample computer outputs for the MLGW, Utility, and Industry Base Cases. The results of the base case cost analyses for plant fenceline gas costs are as follows: Municipal Utility, (e.g. MLGW), $3.76/MM Btu; Investor Owned Utility, (25% equity), $4.48/MM Btu; and Investor Case, (100% equity), $5.21/MM Btu. The results of 47 IFG product cost sensitivity cases involving a dozen sensitivity variables are presented. Plant half size, coal cost, plant investment, and return on equity (industrial) are the most important sensitivity variables. Volume III also presents a summary discussion of the socioeconomic impact of the plant and a discussion of possible commercial incentives for development of IFG plants.

  7. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  8. Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) to more..

    Science.gov (United States)

    Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) more...

  9. Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

    Science.gov (United States)

    Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

  10. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  11. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  12. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  13. Radioisotopes in the Physical Sciences and Industry. Proceedings of the Conference on the Use of Radioisotopes in the Physical Sciences and Industry. V. III

    International Nuclear Information System (INIS)

    1962-01-01

    The Conference on the Use of Radioisotopes in the Physical Sciences and Industry, which took place in Copenhagen in September 1960, was the latest of a series of isotope conferences which began in 1951 at Oxford and continued with those held in 1954, again at Oxford, and in 1957 in Paris. The development of the uses of radioisotopes had been so rapid and many-sided that this Copenhagen Conference, organized by the IAEA with the co-operation of UNESCO, had to be restricted to applications in the physical sciences and industry. Applications of radioisotopes in animal biology and the medical sciences were discussed at the Conference held in Mexico City in November 1961. Even so, more than 500 scientists attended the Conference in Copenhagen and over 140 contributions were presented and discussed by this international gathering. Many more papers of great interest were submitted but could not be fitted into the programme. The proceedings of this Conference demonstrate the advances which had taken place since the earlier meetings in Oxford and Paris. It is hoped that this publication will contribute towards the stimulation of further research in the application of radioactive techniques.

  14. Forensic engineering of advanced polymeric materials. Part III - Biodegradation of thermoformed rigid PLA packaging under industrial composting conditions.

    Science.gov (United States)

    Musioł, Marta; Sikorska, Wanda; Adamus, Grazyna; Janeczek, Henryk; Richert, Jozef; Malinowski, Rafal; Jiang, Guozhan; Kowalczuk, Marek

    2016-06-01

    This paper presents a forensic engineering study on the biodegradation behaviour of prototype packaging thermoformed from PLA-extruded film and plain PLA film under industrial composting conditions. Hydrolytic degradation in water was conducted for reference. The effects of composting duration on changes in molar mass, glass transition temperature and degree of crystallinity of the polymeric material were monitored using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The chemical structure of water soluble degradation products of the polymeric material was determined using nuclear magnetic resonance (NMR) and electrospray ionization mass spectrometry (ESI-MS). The results show that the biodegradation process is less dependent on the thermoforming process of PLA and more dependent on the composting/degradation conditions that are applied. The increase in the dispersity index, leading to the bimodal molar mass distribution profile, suggests an autocatalytic hydrolysis effect at the early stage of the composting process, during which the bulk hydrolysis mechanism dominantly operates. Both the prototype PLA-packaging and PLA rigid film samples were shown to have a gradual increase in opacity due to an increase in the degree of crystallinity. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. EDTA excess Zn(II) back-titration in the presence of 4-(2-pyridylazo)-resorcinol indicator and naphthol green {beta} as inert dye for determining Cr(III) as Cr(III)/EDTA complex: Application of the method to a leather industry wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Venezia, M.; Alonzo, G. [Dipartimento di Ingegneria e Tecnologie Agro Forestali, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Palmisano, L. [Dipartimento di Ingegneria Chimica dei Processi e dei Materiali, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo (Italy)], E-mail: palmisano@dicpm.unipa.it

    2008-03-01

    The colour changes of 4-(2-pyridylazo)-resorcinol and naphthol green {beta} as new screening metallochromic indicator in back-titration of EDTA excess with Zn(II) to determine Cr(III)/EDTA complex was investigated with the help of tristimulus colorimetry. Specific colour discrimination (SCD) and L*, a*, b* 1976 parameters were successfully applied to evaluate the quality of colour transition at the end-point in non-alkaline media and in the presence of Zn(II) and Ca(II) which resulted in non-interfering species at 1 x 10{sup -3} M and 2 x 10{sup -3} M, respectively. The above concentrations are comparable with those used for Cr(III). Validation of the fast and accurate reported method was performed by atomic absorption spectroscopy. Moreover, the method was applied for determining Cr as Cr(III) in a wastewater effluent deriving from a leather industry.

  16. EDTA excess Zn(II) back-titration in the presence of 4-(2-pyridylazo)-resorcinol indicator and naphthol green β as inert dye for determining Cr(III) as Cr(III)/EDTA complex: Application of the method to a leather industry wastewater

    International Nuclear Information System (INIS)

    Venezia, M.; Alonzo, G.; Palmisano, L.

    2008-01-01

    The colour changes of 4-(2-pyridylazo)-resorcinol and naphthol green β as new screening metallochromic indicator in back-titration of EDTA excess with Zn(II) to determine Cr(III)/EDTA complex was investigated with the help of tristimulus colorimetry. Specific colour discrimination (SCD) and L*, a*, b* 1976 parameters were successfully applied to evaluate the quality of colour transition at the end-point in non-alkaline media and in the presence of Zn(II) and Ca(II) which resulted in non-interfering species at 1 x 10 -3 M and 2 x 10 -3 M, respectively. The above concentrations are comparable with those used for Cr(III). Validation of the fast and accurate reported method was performed by atomic absorption spectroscopy. Moreover, the method was applied for determining Cr as Cr(III) in a wastewater effluent deriving from a leather industry

  17. 75 FR 13759 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Science.gov (United States)

    2010-03-23

    ... Products'' and North American Industry Classification System (NAICS) code 325510, ``Paint and Coating... Emission Standards for Automobile Refinish Coatings AGENCY: Environmental Protection Agency. ACTION: Notice... coatings and coating components. Manufacturers of automobile refinish coatings and coating components fall...

  18. Operational tests and irradiation programming proposal for the industrial production of 131 I in the TRIGA Mark III reactor of the Nuclear Centre (ININ)

    International Nuclear Information System (INIS)

    Alanis M, J.; Reyes J, J.L.; Ruiz C, M.A.

    2003-01-01

    In the National Institute of Nuclear Research it was recently finished the project for the production of I-131 at industrial level, the one which can divide basically in: (a) Preparation of the raw materials (TeO 2 ), (b) Sintering, (c) Neutron irradiation and (d) Separation of the I-131. With the end of starting the industrial production of this process, in this work it is presented the operational tests and an irradiation proposal of the TeO 2 to obtain quantities of I-131 that cover, if not totally, partially the national market. For this, they were carried out irradiation tests of 6 samples to different flows of neutrons. The result of these tests settles down that irradiating a mass of 240 g TeO 2 to a neutron flow of 6.53 x 10 12 n/cm 2 s in 4 cycles of 30 h per week approximately 2.54 Ci/week of I-131 distilled are obtained, which represents 35% of the demand of the Plant of Radioisotopes production of the ININ. (Author)

  19. Richard III

    DEFF Research Database (Denmark)

    Lauridsen, Palle Schantz

    2017-01-01

    Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"......Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"...

  20. Removal of Organic Dyes from Industrial Wastewaters Using UV/H2O2, UV/H2O2/Fe (II, UV/H2O2/Fe (III Processes

    Directory of Open Access Journals (Sweden)

    Nezamaddin Daneshvar

    2007-03-01

    Full Text Available UV/H2O2, UV/H2O2/Fe (II and UV/H2O2/Fe (III processes are very effective in removing pollutants from wastewater and can be used for treatment of dyestuff units wastewaters. In this study, Rhodamine B was used as a typical organic dye. Rhodamine B has found wide applications in wax, leather, and paper industries. The results from this study showed that this dye was degradable in the presence of hydrogen peroxide under UV-C irradiation (30W mercury light and Photo-Fenton process. The dye was resistant to UV irradiation. In the absence of UV irradiation, the decolorization efficiency was very negligible in the presence of hydrogen. The effects of different system variables such as initial dye concentration, duration of UV irradiation, and initial hydrogen peroxide concentration were investigated in the UV/H2O2 process. Investigation of the kinetics of the UV/H2O2 process showed that the semi-log plot of the dye concentration versus time was linear, suggesting a first order reaction. It was found that Rhodamine B decolorization efficiencies in the UV/H2O2/Fe (II and UV/H2O2/Fe (III processes were higher than that in the UV/H2O2 process. Furthermore, a solution containing 20 ppm of Rhodamine B was decolorized in the presence 18 mM of H2O2 under UV irradiation for 15 minutes. It was also found that addition of 0.1 mM Fe(II or Fe(III to the solution containing  20  ppm of the dye and 5 mM H2O2 under UV light  illumination decreased removal time to 10 min.

  1. PARDISEKO III

    International Nuclear Information System (INIS)

    Jordan, H.; Sack, C.

    1975-05-01

    This report gives a detailed description of the latest version of the PARDISEKO code, PARDISEKO III, with particular emphasis on the numerical and programming methods employed. The physical model and its relation to nuclear safety as well as a description and the results of confirming experiments are treated in detail in the Karlsruhe Nuclear Research Centre report KFK-1989. (orig.) [de

  2. Basel III D: Swiss Finish to Basel III

    OpenAIRE

    Christian M. McNamara; Natalia Tente; Andrew Metrick

    2014-01-01

    After the Basel Committee on Banking Supervision (BCBS) introduced the Basel III framework in 2010, individual countries confronted the question of how best to implement the framework given their unique circumstances. Switzerland, with a banking industry that is both heavily concentrated and very large relative to the size of its overall economy, faced a special challenge. It ultimately adopted what is sometimes referred to as the “Swiss Finish” to Basel III – enhanced requirements applicable...

  3. Fermilab III

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The total ongoing plans for Fermilab are wrapped up in the Fermilab III scheme, centrepiece of which is the proposal for a new Main Injector. The Laboratory has been awarded a $200,000 Illinois grant which will be used to initiate environmental assessment and engineering design of the Main Injector, while a state review panel recommended that the project should also benefit from $2 million of funding

  4. Fermilab III

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1990-09-15

    The total ongoing plans for Fermilab are wrapped up in the Fermilab III scheme, centrepiece of which is the proposal for a new Main Injector. The Laboratory has been awarded a $200,000 Illinois grant which will be used to initiate environmental assessment and engineering design of the Main Injector, while a state review panel recommended that the project should also benefit from $2 million of funding.

  5. Steps Towards Industrialization of Cu-III-VI2Thin-Film Solar Cells:Linking Materials/Device Designs to Process Design For Non-stoichiometric Photovoltaic Materials.

    Science.gov (United States)

    Hwang, Huey-Liang; Chang, Hsueh-Hsin; Sharma, Poonam; Letha, Arya Jagadhamma; Shao, Lexi; Zhang, Yafei; Tseng, Bae-Heng

    2016-10-01

    The concept of in-line sputtering and selenization become industrial standard for Cu-III-VI 2 solar cell fabrication, but still it's very difficult to control and predict the optical and electrical parameters, which are closely related to the chemical composition distribution of the thin film. The present review article addresses onto the material design, device design and process design using parameters closely related to the chemical compositions. Its variation leads to change in the Poisson equation, current equation, and continuity equation governing the device design. To make the device design much realistic and meaningful, we need to build a model that relates the opto-electrical properties to the chemical composition. The material parameters as well as device structural parameters are loaded into the process simulation to give a complete set of process control parameters. The neutral defect concentrations of non-stoichiometric CuMSe 2 (M = In and Ga) have been calculated under the specific atomic chemical potential conditions using this methodology. The optical and electrical properties have also been investigated for the development of a full-function analytical solar cell simulator. The future prospects regarding the development of copper-indium-gallium-selenide thin film solar cells have also been discussed.

  6. Solar industry advertising guidelines. Task III

    Energy Technology Data Exchange (ETDEWEB)

    Hostetler, J.S.

    1981-09-01

    The purpose of these guidelines is to acquaint SEIA members with basic principles of Federal Trade Commission (FTC) law related to advertising and sales representations in order to assist SEIA members in insuring that their advertising is fair and accurate when assessed against FTC standards, thereby avoiding potentially costly FTC action. The following are discussed: the nature of advertising, when is an advertisement deceptive, advertising of product certification and testing results, substantiation for advertising claims, advertising of tax credits, warranty advertising, potential liabilities under the FTC Act, and recommendations for avoiding FTC action. (MHR)

  7. Power industry and the environment III

    International Nuclear Information System (INIS)

    1993-11-01

    The conference was primarily concerned with the future role of brown and bituminous coal in the energy policy of the Czech Republic and with their environmental impacts. Attention was also paid to remediation of consequences of open pit mining in the North Bohemian brown coal district and to the environmental impacts of coal-fired power plants operated by the CEZ utility, especially to air pollution with sulfur dioxide in northwestern Bohemia. (J.B.)

  8. Operational tests and irradiation programming proposal for the industrial production of {sup 131} I in the TRIGA Mark III reactor of the Nuclear Centre (ININ); Pruebas operacionales y propuesta de programacion de irradiacion para la produccion industrial de {sup 131} I en el reactor TRIGA Mark III del Centro Nuclear (ININ)

    Energy Technology Data Exchange (ETDEWEB)

    Alanis M, J.; Reyes J, J.L.; Ruiz C, M.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    In the National Institute of Nuclear Research it was recently finished the project for the production of I-131 at industrial level, the one which can divide basically in: (a) Preparation of the raw materials (TeO{sub 2}), (b) Sintering, (c) Neutron irradiation and (d) Separation of the I-131. With the end of starting the industrial production of this process, in this work it is presented the operational tests and an irradiation proposal of the TeO{sub 2} to obtain quantities of I-131 that cover, if not totally, partially the national market. For this, they were carried out irradiation tests of 6 samples to different flows of neutrons. The result of these tests settles down that irradiating a mass of 240 g TeO{sub 2} to a neutron flow of 6.53 x 10{sup 12} n/cm{sup 2}s in 4 cycles of 30 h per week approximately 2.54 Ci/week of I-131 distilled are obtained, which represents 35% of the demand of the Plant of Radioisotopes production of the ININ. (Author)

  9. Mechatronic systems and materials III

    CERN Document Server

    Gosiewski, Zdzislaw

    2009-01-01

    This very interesting volume is divided into 24 sections; each of which covers, in detail, one aspect of the subject-matter: I. Industrial robots; II. Microrobotics; III. Mobile robots; IV. Teleoperation, telerobotics, teleoperated semi-autonomous systems; V. Sensors and actuators in mechatronics; VI. Control of mechatronic systems; VII. Analysis of vibration and deformation; VIII. Optimization, optimal design; IX. Integrated diagnostics; X. Failure analysis; XI. Tribology in mechatronic systems; XII. Analysis of signals; XIII. Measurement techniques; XIV. Multifunctional and smart materials;

  10. Antithrombin III blood test

    Science.gov (United States)

    ... medlineplus.gov/ency/article/003661.htm Antithrombin III blood test To use the sharing features on this page, ... a protein that helps control blood clotting. A blood test can determine the amount of AT III present ...

  11. Restructuring the Electricity Industry

    DEFF Research Database (Denmark)

    Boom, Anette; Buehler, Stefan

    We study the role of vertical structure in determining generating capacities and retail prices in the electricity industry. Allowing for uncertain demand, we compare three market configurations: (i) integrated monopoly, (ii) integrated duopoly with wholesale trade, and (iii) separated duopoly wit...

  12. Industrial Processes to Reduce Generation of Hazardous Waste at DoD Facilities. Phase III Report. Appendix B. Workshop Manual Innovative Hard Chrome Plating, Pensacola Naval Air Rework Facility, Pensacola, Florida.

    Science.gov (United States)

    1985-12-01

    recovery, regional hazardous waste treatment, hazardous waste storage construction criteria, environmental audits, and low-level radioactive waste...Interior, Bureau of Reclamation, May 1983. Campbell, M. and W.M. Glenn. Profit from Polution Prevention, A Guide to Industrial Waste Reduction and...otherwise managed. For the purposes of this memorandum, hazardous materials do not include those radioactive materials that the Nuclear Regulatory

  13. The Industrial Internet of Things

    OpenAIRE

    Albano, Michele; Silva, José Bruno; Lino Ferreira, Luis

    2017-01-01

    Demo in 22º Seminário da Rede Temática de Comunicações Móveis (RTCM 2017). 18, Jan, 2017, Session III. Lisboa. The application of the Internet of Things to manufacturing is the driving force of the new industrial revolution (Industrie 4.0). In fact, most activities in the manufacturing industry can benefit from the data collected in the context of the industrial process. The Industrial Internet of Things (IIoT), whose pillars are the usage of IP communication between the devices and making...

  14. Metallothionein (MT)-III

    DEFF Research Database (Denmark)

    Carrasco, J; Giralt, M; Molinero, A

    1999-01-01

    Metallothionein-III is a low molecular weight, heavy-metal binding protein expressed mainly in the central nervous system. First identified as a growth inhibitory factor (GIF) of rat cortical neurons in vitro, it has subsequently been shown to be a member of the metallothionein (MT) gene family...... injected rats. The specificity of the antibody was also demonstrated in immunocytochemical studies by the elimination of the immunostaining by preincubation of the antibody with brain (but not liver) extracts, and by the results obtained in MT-III null mice. The antibody was used to characterize...... the putative differences between the rat brain MT isoforms, namely MT-I+II and MT-III, in the freeze lesion model of brain damage, and for developing an ELISA for MT-III suitable for brain samples. In the normal rat brain, MT-III was mostly present primarily in astrocytes. However, lectin staining indicated...

  15. Radiation protection in category III large gamma irradiators

    International Nuclear Information System (INIS)

    Costa, Neivaldo; Furlan, Gilberto Ribeiro; Itepan, Natanael Marcio

    2011-01-01

    This article discusses the advantages of category III large gamma irradiator compared to the others, with emphasis on aspects of radiological protection, in the industrial sector. This category is a kind of irradiators almost unknown to the regulators authorities and the industrial community, despite its simple construction and greater radiation safety intrinsic to the model, able to maintain an efficiency of productivity comparable to those of category IV. Worldwide, there are installed more than 200 category IV irradiators and there is none of a category III irradiator in operation. In a category III gamma irradiator, the source remains fixed in the bottom of the tank, always shielded by water, negating the exposition risk. Taking into account the benefits in relation to radiation safety, the category III large irradiators are highly recommended for industrial, commercial purposes or scientific research. (author)

  16. NNDSS - Table III. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2018.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  17. NNDSS - Table III. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2017.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  18. Workshop 96. Part III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.).

  19. Workshop 96. Part III

    International Nuclear Information System (INIS)

    1995-12-01

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.)

  20. Radiation protection in category III large gamma irradiators; Radioprotecao em irradiadores de grande porte de categoria III

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Neivaldo; Furlan, Gilberto Ribeiro, E-mail: neivaldo@cena.usp.b, E-mail: gilfurlan@cena.usp.b [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil); Itepan, Natanael Marcio, E-mail: natanael.itepan@unianhanguera.edu.b [Universidade Anhanguera, Goiania, GO (Brazil)

    2011-07-01

    This article discusses the advantages of category III large gamma irradiator compared to the others, with emphasis on aspects of radiological protection, in the industrial sector. This category is a kind of irradiators almost unknown to the regulators authorities and the industrial community, despite its simple construction and greater radiation safety intrinsic to the model, able to maintain an efficiency of productivity comparable to those of category IV. Worldwide, there are installed more than 200 category IV irradiators and there is none of a category III irradiator in operation. In a category III gamma irradiator, the source remains fixed in the bottom of the tank, always shielded by water, negating the exposition risk. Taking into account the benefits in relation to radiation safety, the category III large irradiators are highly recommended for industrial, commercial purposes or scientific research. (author)

  1. The steam generator programme of PISC III

    International Nuclear Information System (INIS)

    Birac, C.; Herkenrath, H.

    1990-12-01

    The PISC III Actions are intended to extend the results and methodologies of the previous PISC excercises, i.e. the validation of the capabilities of the various examination techniques when used on real defects in real components under real conditions of inspection. Being aware of the important safety role that steam generator tubes play as barrier between primary and secondary cooling system and of the industrial problems that the degradation of these tubes can create, the PISC III Management Board agreed to include in the PISC III Programme a special Action on Steam Generator Tubes Testing (SGT). It was decided to organize the programme in three phases, including Round Robin Tests (RRT): - capability tests on loose tubes, - capability tests on transportable mock-ups, - reliability tests on fixed mock-ups including some interesting SURRY tubes

  2. Failures in Phase III: Causes and Consequences.

    Science.gov (United States)

    Seruga, Bostjan; Ocana, Alberto; Amir, Eitan; Tannock, Ian F

    2015-10-15

    Phase III randomized controlled trials (RCT) in oncology fail to lead to registration of new therapies more often than RCTs in other medical disciplines. Most RCTs are sponsored by the pharmaceutical industry, which reflects industry's increasing responsibility in cancer drug development. Many preclinical models are unreliable for evaluation of new anticancer agents, and stronger evidence of biologic effect should be required before a new agent enters the clinical development pathway. Whenever possible, early-phase clinical trials should include pharmacodynamic studies to demonstrate that new agents inhibit their molecular targets and demonstrate substantial antitumor activity at tolerated doses in an enriched population of patients. Here, we review recent RCTs and found that these conditions were not met for most of the targeted anticancer agents, which failed in recent RCTs. Many recent phase III RCTs were initiated without sufficient evidence of activity from early-phase clinical trials. Because patients treated within such trials can be harmed, they should not be undertaken. The bar should also be raised when making decisions to proceed from phase II to III and from phase III to marketing approval. Many approved agents showed only better progression-free survival than standard treatment in phase III trials and were not shown to improve survival or its quality. Introduction of value-based pricing of new anticancer agents would dissuade the continued development of agents with borderline activity in early-phase clinical trials. When collaborating with industry, oncologists should be more critical and better advocates for cancer patients. ©2015 American Association for Cancer Research.

  3. Monitoring and assessment of mercury pollution in the vicinity of a chloralkali plant. III. Concentration and genotoxicity of mercury in the industrial effluent and contaminated water of Rushikulya estuary, India.

    Science.gov (United States)

    Panda, K K; Lenka, M; Panda, B B

    1992-01-01

    Aquatic mercury pollution of the Rushikulya estuary in the vicinity of the chloralkali plant at Ganjam, India was monitored over a period from October 1987 to May 1989. The concentrations of aquatic mercury in the water samples taken from the effluent channel and from different sites along the course of the estuary covering a distance of 2 km were periodically recorded and ranged from 0 to 0.5 mg/l. The bioconcentration and genotoxicity of aquatic mercury in the samples were assessed by the Allium micronucleus (MNC) assay. The frequency of cells with MNC was highly correlated not only with bioconcentrated mercury (root mercury) but also with the levels of aquatic mercury. The threshold assessment values such as effective concentration fifty (EC50) for root growth, lowest effective concentration tested (LECT), and highest ineffective concentration tested (HICT) for induction of MNC in Allium MNC assay for the present aquatic industrial mercury were determined to be 0.14, 0.06 and 0.02 mg/l, respectively.

  4. Hybrid III-V/silicon lasers

    Science.gov (United States)

    Kaspar, P.; Jany, C.; Le Liepvre, A.; Accard, A.; Lamponi, M.; Make, D.; Levaufre, G.; Girard, N.; Lelarge, F.; Shen, A.; Charbonnier, P.; Mallecot, F.; Duan, G.-H.; Gentner, J.-.; Fedeli, J.-M.; Olivier, S.; Descos, A.; Ben Bakir, B.; Messaoudene, S.; Bordel, D.; Malhouitre, S.; Kopp, C.; Menezo, S.

    2014-05-01

    The lack of potent integrated light emitters is one of the bottlenecks that have so far hindered the silicon photonics platform from revolutionizing the communication market. Photonic circuits with integrated light sources have the potential to address a wide range of applications from short-distance data communication to long-haul optical transmission. Notably, the integration of lasers would allow saving large assembly costs and reduce the footprint of optoelectronic products by combining photonic and microelectronic functionalities on a single chip. Since silicon and germanium-based sources are still in their infancy, hybrid approaches using III-V semiconductor materials are currently pursued by several research laboratories in academia as well as in industry. In this paper we review recent developments of hybrid III-V/silicon lasers and discuss the advantages and drawbacks of several integration schemes. The integration approach followed in our laboratory makes use of wafer-bonded III-V material on structured silicon-on-insulator substrates and is based on adiabatic mode transfers between silicon and III-V waveguides. We will highlight some of the most interesting results from devices such as wavelength-tunable lasers and AWG lasers. The good performance demonstrates that an efficient mode transfer can be achieved between III-V and silicon waveguides and encourages further research efforts in this direction.

  5. Fusion Power Demonstration III

    International Nuclear Information System (INIS)

    Lee, J.D.

    1985-07-01

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report

  6. III-V microelectronics

    CERN Document Server

    Nougier, JP

    1991-01-01

    As is well known, Silicon widely dominates the market of semiconductor devices and circuits, and in particular is well suited for Ultra Large Scale Integration processes. However, a number of III-V compound semiconductor devices and circuits have recently been built, and the contributions in this volume are devoted to those types of materials, which offer a number of interesting properties. Taking into account the great variety of problems encountered and of their mutual correlations when fabricating a circuit or even a device, most of the aspects of III-V microelectronics, from fundamental p

  7. Summary of Session III

    International Nuclear Information System (INIS)

    Furman, M.A.

    2002-01-01

    This is a summary of the talks presented in Session III ''Simulations of Electron-Cloud Build Up'' of the Mini-Workshop on Electron-Cloud Simulations for Proton and Positron Beams ECLOUD-02, held at CERN, 15-18 April 2002

  8. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  9. Farmaceutische industrie

    NARCIS (Netherlands)

    Ros JPM; van der Poel P; Etman EJ; Montfoort JA; LAE

    1995-01-01

    Dit rapport over de farmaceutische industrie is gepubliceerd binnen het Samenwerkingsproject Procesbeschrijvingen Industrie Nederland (SPIN). In het kader van dit project is informatie verzameld over industriele bedrijven of industriele processen ter ondersteuning van het overheidsbeleid op het

  10. The Challenges of Basel III for Romanian Banking System

    OpenAIRE

    Anca Elena NUCU

    2011-01-01

    Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the i...

  11. Fluid mixing III

    International Nuclear Information System (INIS)

    Harnby, N.

    1988-01-01

    Covering all aspects of mixing, this work presents research and developments in industrial applications, flow patterns and mixture analysis, mixing of solids into liquids, and mixing of gases into liquids

  12. Industrial electrification

    International Nuclear Information System (INIS)

    Melvin, J.G.

    1983-03-01

    The technical and economic scope for industrial process electrification in Canada is assessed in the light of increasing costs of combustion fuels relative to electricity. It is concluded that electricity is capable of providing an increasing share of industrial energy, eventually aproaching 100 percent. The relatively low cost of electricity in Canada offers industry the opportunity of a head start in process electrification with consequent advantages in world markets both for industrial products and for electrical process equipment and technology. A method is described to promote the necessary innovation by providing access to technology and financing. The potential growth of electricity demand due to industrial electrification is estimated

  13. Cobalt(III) complex

    Indian Academy of Sciences (India)

    Administrator

    e, 40 µM complex, 10 hrs after dissolution, f, 40 µM complex, after irradiation dose 15 Gy. and H-atoms result in reduction of Co(III) to Co. (II). 6. It is interesting to see in complex containing multiple ligands what is the fate of electron adduct species formed by electron addition. Reduction to. Co(II) and intramolecular transfer ...

  14. Calculus III essentials

    CERN Document Server

    REA, Editors of

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Calculus III includes vector analysis, real valued functions, partial differentiation, multiple integrations, vector fields, and infinite series.

  15. Socioeconomic Impact Assessment: Communications Industry. Phase III. Technology Forecast.

    Science.gov (United States)

    1979-02-02

    shared transnission channel sequentially . This provision of storage and store-and-forward capability represents a rather large departure from present...multiplexed C - (TDM) carrier systems have the following advantages: 1. Use of low-cost solid-state circuits. 2. Elaborate lineup adjustments common...transparent, sequential , bit-stream channel, independent of topology, route selection or transmission media of the network (77). As many new network

  16. Development of industry processes simulators. Part III (Continuous casting)

    International Nuclear Information System (INIS)

    Ramirez, A.; Morales, R.; Morales, A. J.; Ramos, A.; Solorio, G.

    2006-01-01

    This work written for illustrating the use of Monte Carlo methods and generating of random number in combination with the information of the simulation system of thermal behaviour described previously in order to reproduce in a computer the solidification process of the steel and simulate the formation of strictures of casting step by step. (Author). 12 refs

  17. Process industry properties in nuclear industry

    International Nuclear Information System (INIS)

    Zheng Hualing

    2005-01-01

    In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

  18. Recent advances on biological production of difructose dianhydride III.

    Science.gov (United States)

    Zhu, Yingying; Yu, Shuhuai; Zhang, Wenli; Zhang, Tao; Guang, Cuie; Mu, Wanmeng

    2018-04-01

    Difructose dianhydride III (DFA III) is a cyclic difructose containing two reciprocal glycosidic linkages. It is easily generated with a small amount by sucrose caramelization and thus occurs in a wide range of food-stuffs during food processing. DFA III has half sweetness but only 1/15 energy of sucrose, showing potential industrial application as low-calorie sucrose substitute. In addition, it displays many benefits including prebiotic effect, low cariogenicity property, and hypocholesterolemic effect, and improves absorption of minerals, flavonoids, and immunoglobulin G. DFA III is biologically produced from inulin by inulin fructotransferase (IFTase, EC 4.2.2.18). Plenty of DFA III-producing enzymes have been identified. The crystal structure of inulin fructotransferase has been determined, and its molecular modification has been performed to improve the catalytic activity and structural stability. Large-scale production of DFA III has been studied by various IFTases, especially using an ultrafiltration membrane bioreactor. In this article, the recent findings on physiological effects of DFA III are briefly summarized; the research progresses on identification, expression, and molecular modification of IFTase and large-scale biological production of DFA III by IFTase are reviewed in detail.

  19. Industrial Robots.

    Science.gov (United States)

    Reed, Dean; Harden, Thomas K.

    Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

  20. Industrial symbiosis

    DEFF Research Database (Denmark)

    Sacchi, Romain; Remmen, Arne

    2017-01-01

    This study examines the development of industrial symbiosis through a practical model for physical, organizational, and social interactions in six different cases from around the world. The results provide a framework that can be used by industrial symbiosis practitioners to facilitate the creation...

  1. 2001 Industry Studies: Services Industry

    National Research Council Canada - National Science Library

    Cervone, Michael

    2001-01-01

    .... has maintained its economic strength in traditional services industries such as transportation, tourism, public utilities, finance and insurance, accounting, engineering, architecture, medical, legal...

  2. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2000-01-01

    The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

  3. Industry honoured

    CERN Multimedia

    2008-01-01

    CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

  4. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...... of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information...

  5. The Russian gas industry

    International Nuclear Information System (INIS)

    1997-01-01

    The Russian Federation holds the world's largest proven natural gas reserves, and produces more natural gas than any other nation. Russian exports of gas to Europe and the other nations of the Commonwealth of Independent States (CIS) have a significant impact on natural gas markets throughout Europe and Asia. The aim of this three part study is to inform the international energy and investment community about the current status of the Russian gas industry and the prospects for its future development through 2010. It is also intended to provide an opportunity for the appropriate authorities in the Russian Federation to assess the needs of the industry and to consider areas for possible collaboration with the international investment community and international organizations in a rapidly changing economic and business environment. The study was prepared by the Energy Branch of the United Nations Department for Development Support and Management Services (UN/DDSMS). It was financed by the United Nations Development Programme (UNDP). Part I describes Russian gas reserves and potential resources, and overviews the country's gas producing, pipeline and distribution industries. Additionally, it summarizes the markets for Russian natural gas including domestic and external markets. It discusses the primary economics and potential factors that currently impact the Russian gas industry during the Federation's transition toward a market economy. Part II highlights possible directions for the development of the Russian gas resource base, including upstream gas production and downstream marketing in five-, ten- and fifteen-year time frames. It projects export opportunities for Russian Federation gas and evaluates the options for shaping regional and international markets. Part III addresses the legal and regulatory framework and fiscal regime of the Russian gas industry. It also reviews the major investment requirements and the equipment and training needs of the Russian gas

  6. Kinetics and mechanism of the reactions of hexaaqua rhodium (III ...

    Indian Academy of Sciences (India)

    Unknown

    oxidation states ranging from +1 to +6. Interest on ... reactivity, anti tumour activity, electronic structure, and catalytic functions of its complexes with poten- tial industrial ... aminecobalt (III) complexes in which it is S-bonded to the metal centre.8 ...

  7. Pseudo Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Fadia M. Al-Hummayani

    2016-04-01

    Full Text Available The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance “modified Hawley appliance with inverted labial bow,” some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month.

  8. Ammonium diphosphitoindate(III

    Directory of Open Access Journals (Sweden)

    Farida Hamchaoui

    2013-04-01

    Full Text Available The crystal structure of the title compound, NH4[In(HPO32], is built up from InIII cations (site symmetry 3m. adopting an octahedral environment and two different phosphite anions (each with site symmetry 3m. exhibiting a triangular–pyramidal geometry. Each InO6 octahedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO32]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO32]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4+ cations and the O atoms of the framework.

  9. Fast ejendom III

    DEFF Research Database (Denmark)

    Munk-Hansen, Carsten

    Bogen er det tredje bind af tre planlagte bind om fast ejendom: I Overdragelsen, II Bolighandlen og III Ejerbeføjelsen. Fremstillingens giver et grundigt overblik over centrale områder af en omfattende regulering af fast ejendom, med angivelse af litteratur, hvor læseren kan søge yderligere...... oplysning. En ejer af fast ejendom er på særdeles mange områder begrænset i sin råden sammenlignet med ejeren af et formuegode i almindelighed. Fremstillingen tager udgangspunkt i ejerens perspektiv (fremfor samfundets eller myndighedernes). Både den privatretlige og offentligretlige regulering behandles......, eksempelvis ejendomsdannelsen, servitutter, naboretten, hævd, zoneinddelingen, den fysiske planlægning, beskyttelse af natur, beskyttelse af kultur, forurening fra fast ejendom, erstatning for forurening, jordforurening, ekspropriation, byggeri og adgang til fast ejendom....

  10. Industrial ecology.

    Science.gov (United States)

    Patel, C K

    1992-01-01

    Industrial ecology addresses issues that will impact future production, use, and disposal technologies; proper use of the concept should reduce significantly the resources devoted to potential remediation in the future. This cradle-to-reincarnation production philosophy includes industrial processes that are environmentally sound and products that are environmentally safe during use and economically recyclable after use without adverse impact on the environment or on the net cost to society. This will require an industry-university-government round table to set the strategy and agenda for progress. PMID:11607254

  11. Industrial practices

    International Nuclear Information System (INIS)

    Velasquez Torrez, Patricia Irma

    1999-01-01

    This document reports the industrial practices carried out by the author viewing the requirements fulfilled for obtention the academic degree in chemical engineering of the San Andres University - Bolivia

  12. Electronics Industry

    National Research Council Canada - National Science Library

    Ginter, Michael J; Andersen, James L; Becker, John A; Belliveau, Gerald E; Eppich, Frank J; Awai, Herman T; Hanko, David J; Hughes, Bob; Jones, Douglas; Larson, Kelly J

    2007-01-01

    .... area, New York State, Silicon Valley (California), Taiwan, and China. This approach provides a wide range of perspectives from which to examine the selected industry's current condition, outlook, and challenges...

  13. Industrial radiography

    International Nuclear Information System (INIS)

    1994-01-01

    This Health and Safety Executive Information Sheet on industrial radiography aims to inform directors and managers of industrial radiography companies on the safety precautions necessary to ensure that their personnel do not exceed dose guidelines for exposure to ionizing radiation. The Ionising Radiations Regulations 1985 (IRR85) require that exposure doses for radiographers are kept as low reasonably practicable. Equipment maintenance, and the employment of proper emergency procedures will help to ensure personnel safety. (UK)

  14. Industrial ceramics

    International Nuclear Information System (INIS)

    Mengelle, Ch.

    1999-04-01

    After having given the definition of the term 'ceramics', the author describes the different manufacturing processes of these compounds. These materials are particularly used in the fields of 1)petroleum industry (in primary and secondary reforming units, in carbon black reactors and ethylene furnaces). 2)nuclear industry (for instance UO 2 and PuO 2 as fuels; SiC for encapsulation; boron carbides for control systems..)

  15. Semiconducting III-V compounds

    CERN Document Server

    Hilsum, C; Henisch, Heinz R

    1961-01-01

    Semiconducting III-V Compounds deals with the properties of III-V compounds as a family of semiconducting crystals and relates these compounds to the monatomic semiconductors silicon and germanium. Emphasis is placed on physical processes that are peculiar to III-V compounds, particularly those that combine boron, aluminum, gallium, and indium with phosphorus, arsenic, and antimony (for example, indium antimonide, indium arsenide, gallium antimonide, and gallium arsenide).Comprised of eight chapters, this book begins with an assessment of the crystal structure and binding of III-V compounds, f

  16. Saudi Arabia: petroleum industry review

    International Nuclear Information System (INIS)

    Shammas, Pierre

    2000-01-01

    A comprehensive review is provided of Saudi Arabia's petroleum industry covering oil and gas exploration and production, refining, oil and gas trade, marketing and Saudi overseas investments. Profiles of key Saudi decision makers are provided. A statistical appendix includes data from the start of oil production in Saudi Arabia in 1938. Part I Geological potential; Part II The Saudi energy economy; Part III Production capacity; Part IV The oil refining sector ; Part V Exports and logistics; Part VI Overseas petroleum industry investments; Part VII The decision makers; Part VIII Statistical Appendix; Reserves, Production, Exports, Prices 1950 to 1999. (Author)

  17. SORPTION OF Au(III BY Saccharomyces cerevisiae BIOMASS

    Directory of Open Access Journals (Sweden)

    Amaria Amaria

    2010-07-01

    Full Text Available Au(III sorption by S. cerevisiae biomass extracted from beer waste industry was investigated. Experimentally, the sorption was conducted in batch method. This research involved five steps: 1 identification the functional groups present in the S. cerevisiae biomass by infrared spectroscopic technique, 2 determination of optimum pH, 3 determination of the sorption capacity and energy, 4 determination of the sorption type by conducting desorption of sorbed Au(III using specific eluents having different desorption capacity such as H2O (van der Waals, KNO3 (ion exchange, HNO3 (hydrogen bond, and tiourea (coordination bond, 5 determination of effective eluents in Au(III desorption by partial desorption of sorbed Au(III using thiourea, NaCN and KI. The remaining Au(III concentrations in filtrate were analyzed using Atomic Absorption Spectrophotometer. The results showed that: 1 Functional groups of S. cerevisiae biomass that involved in the sorption processes were hydroxyl (-OH, carboxylate (-COO- and amine (-NH2, 2 maximum sorption was occurred at pH 4, equal to 98.19% of total sorption, 3 The sorption capacity of biomass was 133.33 mg/g (6.7682E-04 mol/g and was involved sorption energy 23.03 kJ mol-1, 4 Sorption type was dominated by coordination bond, 5 NaCN was effective eluent to strip Au(III close to 100%.   Keywords: sorption, desorption, S. cerevisiae biomass, Au(III

  18. Round robin tests of the PISC III programme on defective steam generators tubes

    International Nuclear Information System (INIS)

    Birac, C.; Herkenrath, H.; Crutzen, S.; Miyake, Y.; Maciga, G.

    1991-11-01

    The PISC III actions are intended to extend the results and methodologies of the previous PISC exercises, i.e. the assessment of the capabilities of the various examination techniques when used on real or realistic flaws in real components under real conditions of inspection. Being aware of the industrial problems that the degradation of steam generator tubes can create, the PISC III management board decided to include in the PISC III programme a special action on steam generator tubes testing (SGT). (author)

  19. Dopad regulace Basel III na exportní financování

    OpenAIRE

    Malešová, Jana

    2016-01-01

    The thesis focuses on the impact of the banking regulation Basel III on bank-intermediated trade finance. The theoretical part of the thesis explains details of Basel III requirements, history of Basel Accords and their future in the form of Basel IV, characteristics of trade finance products and of the whole industry. Trade finance industry voiced worries about the negative effect that these new requirements might have on trade finance business. The thesis estimates determinants of bank-inte...

  20. Dark matter detection - III

    International Nuclear Information System (INIS)

    Zacek, Viktor

    2015-01-01

    The quest for the missing mass of the universe has become one of the big challenges of todays particle physics and cosmology. Astronomical observations show that only 1% of the matter of the Universe is luminous. Moreover there is now convincing evidence that 85% of all gravitationally observable matter in the Universe is of a new exotic kind, different from the 'ordinary' matter surrounding us. In a series of three lectures we discuss past, recent and future efforts made world- wide to detect and/or decipher the nature of Dark Matter. In Lecture I we review our present knowledge of the Dark Matter content of the Universe and how experimenters search for it's candidates; In Lecture II we discuss so-called 'direct detection' techniques which allow to search for scattering of galactic dark matter particles with detectors in deep-underground laboratories; we discuss the interpretation of experimental results and the challenges posed by different backgrounds; In Lecture III we take a look at the 'indirect detection' of the annihilation of dark matter candidates in astrophysical objects, such as our sun or the center of the Milky Way; In addition we will have a look at efforts to produce Dark Matter particles directly at accelerators and we shall close with a look at alternative nonparticle searches and future prospects. (author)

  1. Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

    International Nuclear Information System (INIS)

    Ferenc, W.; Bernat, M; Gluchowska, H.W.; Sarzynski, J.

    2010-01-01

    The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilities were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10 -4 mol/dm 3 . (author)

  2. Industrial gases

    International Nuclear Information System (INIS)

    Hunter, D.; Jackson, D.; Coeyman, M.

    1993-01-01

    Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

  3. The ongoing changes in the base oil industry and their potential impact on the lubricant industry

    Energy Technology Data Exchange (ETDEWEB)

    Serra-Holm, Valentina [Nynas AB, Stockholm (Sweden)

    2013-06-15

    During the last years the base oil industry has undergone significant changes, with the rapid growth of Group II and Group III paraffinic base oils and the corresponding decline of Group I supply. The announcements of future instalments show that the increase of Group II and III capacity is indeed a stable trend all over the world. Based on publicly available information, the Group II capacity is expected to grow by 8.6 million tpa, reaching over 22 million tpa, and Group III capacity is expected to double from current 4.1 million tpa up to 8.2 million tpa. As the demand is not expected to grow at the same pace as the increasing supply, it is likely that this new capacity will lead to an oversupply situation in the next five years. Because of their production disadvantages compared to Group II and III and a shrinking demand in automotive applications, it is likely that Group I plants will close down or will operate at reduced throughput to compensate for the new Group II and III capacity. A decline of Group I capacity in favour of Group II and III may pose problems in the formulation of those industrial lubricants where solvency and/or viscosity are needed, such as lubricating greases, metalworking fluids, and several process oils applications. Either alone or in combination with Group II or III oils, naphthenic oils can be used in the formulation of industrial lubricants, as solvency and viscosity poroviders. (orig.)

  4. Energy industry

    Science.gov (United States)

    Staszak, Katarzyna; Wieszczycka, Karolina

    2018-04-01

    The potential sources of metals from energy industries are discussed. The discussion is organized based on two main metal-contains wastes from power plants: ashes, slags from combustion process and spent catalysts from selective catalytic NOx reduction process with ammonia, known as SCR. The compositions, methods of metals recovery, based mainly on leaching process, and their further application are presented. Solid coal combustion wastes are sources of various compounds such as silica, alumina, iron oxide, and calcium. In the case of the spent SCR catalysts mainly two metals are considered: vanadium and tungsten - basic components of industrial ones.

  5. Industrial sector

    International Nuclear Information System (INIS)

    Ainul Hayati Daud; Hazmimi Kasim

    2010-01-01

    The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

  6. PREFACE: Quantum Optics III

    Science.gov (United States)

    Orszag, M.; Retamal, J. C.; Saavedra, C.; Wallentowitz, S.

    2007-06-01

    All the 50 years of conscious pondering did not bring me nearer to an answer to the question `what is light quanta?'. Nowadays, every rascal believes, he knows it, however, he is mistaken. (A Einstein, 1951 in a letter to M Besso) Quantum optics has played a key role in physics in the last several decades. On the other hand, in these early decades of the information age, the flow of information is becoming more and more central to our daily life. Thus, the related fields of quantum information theory as well as Bose-Einstein condensation have acquired tremendous importance in the last couple of decades. In Quantum Optics III, a fusion of these fields appears in a natural way. Quantum Optics III was held in Pucón, Chile, in 27-30 of November, 2006. This beautiful location in the south of Chile is near the lake Villarrica and below the snow covered volcano of the same name. This fantastic environment contributed to a relaxed atmosphere, suitable for informal discussion and for the students to have a chance to meet the key figures in the field. The previous Quantum Optics conferences took place in Santiago, Chile (Quantum Optics I, 2000) and Cozumel, Mexico (Quantum Optics II, 2004). About 115 participants from 19 countries attended and participated in the meeting to discuss a wide variety of topics such as quantum-information processing, experiments related to non-linear optics and squeezing, various aspects of entanglement including its sudden death, correlated twin-photon experiments, light storage, decoherence-free subspaces, Bose-Einstein condensation, discrete Wigner functions and many more. There was a strong Latin-American participation from Argentina, Brazil, Chile, Colombia, Peru, Uruguay, Venezuela and Mexico, as well as from Europe, USA, China, and Australia. New experimental and theoretical results were presented at the conference. In Latin-America a quiet revolution has taken place in the last twenty years. Several groups working in quantum optics and

  7. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  8. Industrial radiography

    International Nuclear Information System (INIS)

    Aloni, A.; Magal, O.

    1992-02-01

    This publication is meant to be a manual for industrial radiography. As such the manual concentrates on the practical aspects, presenting existing radiographic system and techniques of operation to satisfy specified quality requirements. The manual also reviews the safety aspect of performing radiographic work. (author) systems

  9. Education Industry

    Science.gov (United States)

    2007-01-01

    themes: No Child Left Behind Act reauthorization, international competitiveness, and recruiting and retention of quality teachers. The US education ...industry stakeholders and require difficult choices. A more centralized education system has many advantages , and the US should move in that direction...between math and science skills, innovation and creativity, and international education , as all these areas are integral to future success. Finally

  10. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2013-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  11. Structural Properties of the Cr(III)-Fe(III) (Oxy)Hydroxide Compositional Series: Insights for a Nanomaterial 'Solid Solution'

    International Nuclear Information System (INIS)

    Tang, Y.; Zhang, L.; Michel, F.M.; Harrington, R.; Parise, J.B.; Reeder, R.J.

    2010-01-01

    Chromium(III) (oxy)hydroxide and mixed Cr(III)-Fe(III) (oxy)hydroxides are environmentally important compounds for controlling chromium speciation and bioaccessibility in soils and aquatic systems and are also industrially important as precursors for materials and catalyst synthesis. However, direct characterization of the atomic arrangements of these materials is complicated because of their amorphous X-ray properties. This study involves synthesis of the complete Cr(III)-Fe(III) (oxy)hydroxide compositional series, and the use of complementary thermal, microscopic, spectroscopic, and scattering techniques for the evaluation of their structural properties. Thermal analysis results show that the Cr end member has a higher hydration state than the Fe end member, likely associated with the difference in water exchange rates in the first hydration spheres of Cr(III) and Fe(III). Three stages of weight loss are observed and are likely related to the loss of surface/structural water and hydroxyl groups. As compared to the Cr end member, the intermediate composition sample shows lower dehydration temperatures and a higher exothermic transition temperature. XANES analysis shows Cr(III) and Fe(III) to be the dominant oxidation states. XANES spectra also show progressive changes in the local structure around Cr and Fe atoms over the series. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data shows that the Fe end member is nanocrystalline ferrihydrite with an intermediate-range order and average coherent domain size of ∼27 (angstrom). The Cr end member, with a coherent domain size of ∼10 (angstrom), has only short-range order. The PDFs show progressive structural changes across the compositional series. High-resolution transmission electron microscopy (HRTEM) results also show the loss of structural order with increasing Cr content. These observations provide strong structural evidence of chemical substitution and progressive structural

  12. Gen-III/III+ reactors. Solving the future energy supply shortfall. The SWR-1000 option

    International Nuclear Information System (INIS)

    Stosic, Z.V.

    2006-01-01

    Deficiency of non-renewable energy sources, growing demand for electricity and primary energy, increase in population, raised concentration of greenhouse gases in the atmosphere and global warming are the facts which make nuclear energy currently the most realistic option to replace fossil fuels and satisfy global demand. The nuclear power industry has been developing and improving reactor technology for almost five decades and is now ready for the next generation of reactors which should solve the future energy supply shortfall. The advanced Gen-III/III+ (Generation III and/or III+) reactor designs incorporate passive or inherent safety features which require no active controls or operational intervention to manage accidents in the event of system malfunction. The passive safety equipment functions according to basic laws of physics such as gravity and natural convection and is automatically initiated. By combining these passive systems with proven active safety systems, the advanced reactors can be considered to be amongst the safest equipment ever made. Since the beginning of the 90's AREVA NP has been intensively engaged in the design of two advanced Gen-III+ reactors: (i) PWR (Pressurized Water Reactor) EPR (Evolutionary Power Reactor) and (ii) BWR (Boiling Water Reactor) SWR-1000. The SWR-1000 reactor design marks a new era in the successful tradition of BWR technology. It meets the highest safety standards, including control of a core melt accident. This is achieved by supplementing active safety systems with passive safety equipment of diverse design for accident detection and control and by simplifying systems needed for normal plant operation. A short construction period, flexible fuel cycle lengths and a high fuel discharge burn-up contribute towards meeting economic goals. The SWR-1000 completely fulfils international nuclear regulatory requirements. (author)

  13. A user's perspective on the merits and shortcomings of ASME Section III

    International Nuclear Information System (INIS)

    Antaki, G.A.

    1994-01-01

    There are several aspects of Section III which when compared to process industry codes (ASME VIII, ASME B31.3, API, etc.) have proven to be a significant improvement in engineering practice. There are, however, other aspects of ASME III which have added to costs without clear benefits in safety or reliability. The authors present a user's perspective on some of the relative merits and shortcomings of the nuclear codes (ASME III and XI) compared to the process industry codes (such as ASME VIII, B31.3 and API)

  14. Generation III+ Reactor Portfolio

    International Nuclear Information System (INIS)

    2010-03-01

    While the power generation needs of utilities are unique and diverse, they are all faced with the double challenge of meeting growing electricity needs while curbing CO 2 emissions. To answer these diverse needs and help tackle this challenge, AREVA has developed several reactor models which are briefly described in this document: The EPR TM Reactor: designed on the basis of the Konvoi (Germany) and N4 (France) reactors, the EPRTM reactor is an evolutionary model designed to achieve best-in-class safety and operational performance levels. The ATMEA1 TM reactor: jointly designed by Mitsubishi Heavy Industries and AREVA through ATMEA, their common company. This reactor design benefits from the competencies and expertise of the two mother companies, which have commissioned close to 130 reactor units. The KERENA TM reactor: Designed on the basis of the most recent German BWR reactors (Gundremmingen) the KERENA TM reactor relies on proven technology while also including innovative, yet thoroughly tested, features. The optimal combination of active and passive safety systems for a boiling water reactor achieves a very low probability of severe accident

  15. Outcome of tyrosinaemia type III.

    Science.gov (United States)

    Ellaway, C J; Holme, E; Standing, S; Preece, M A; Green, A; Ploechl, E; Ugarte, M; Trefz, F K; Leonard, J V

    2001-12-01

    Tyrosinaemia type III is a rare disorder caused by a deficiency of 4-hydroxyphenylpyruvate dioxygenase, the second enzyme in the catabolic pathway of tyrosine. The majority of the nine previously reported patients have presented with neurological symptoms after the neonatal period, while others detected by neonatal screening have been asymptomatic. All have had normal liver and renal function and none has skin or eye abnormalities. A further four patients with tyrosinaemia type III are described. It is not clear whether a strict low tyrosine diet alters the natural history of tyrosinaemia type III, although there remains a suspicion that treatment may be important, at least in infancy.

  16. Thermodecomposition of lanthanides (III) and ytrium (III) glucoheptonates

    International Nuclear Information System (INIS)

    Giolito, J.

    1987-01-01

    The lanthanides (III) and yttrium (III) glucoheptonates as well the D-glucoheptono 1-4 lactone were studied using common analytical methods, elemental microanalysis of carbon and hydrogen, thermogravimetry and differential scanning calorimetry. These compounds were prepared from the reaction between the lanthanides (III) and yttrium (III) hydroxides and glucoheptonic acid aqueous solution obtained by means of the delta lactone hydrolysis of this acid. After stoichiometric reaction the compounds were precipitated by the addition of absolute ethanol, washed with the same solvent and dried in desiccator. Thermogravimetric the (TG) curves of the lanthanides glucoheptonates of the ceric group present thermal profiles with enough differences permitting an easy caracterization of each compound and the yttrium (III) glucoheptonate TG curve showed a great similarity with the erbium (III) compound TG curve. The differential scanning calometry (DSC) curves showed endothermic and exothermic peaks by their shape, height and position (temperature) permit an easy and rapid identification of each compound specially if DSC and TG curves were examined simultaneously. (author) [pt

  17. Rubber industry

    Science.gov (United States)

    Staszak, Maciej

    2018-03-01

    Following chapter presents short introductory description of rubber and rubber industry. The main problem of rubber industry is the way of the usage of spent tires. Furthermore very important group of problems arise considering the metal and nonmetal additives which are significant component of the vulcanized rubber. The key attention is dedicated to typical ways of rubber usage in utilization and recovery of metals from spent rubber materials concentrating specifically on used tires processing. The method of recovery of rare metals from rubber tires was described. The rubber debris finds widest use in the field of waste metal solutions processing. The environmental pollution caused by metals poses serious threat to humans. Several applications of the use of waste rubber debris to remove metals from environmental waters were described. Moreover, the agriculture usage of waste tire rubber debris is described, presenting systems where the rubber material can be useful as a soil replacement.

  18. Industry Matters

    DEFF Research Database (Denmark)

    Tran, Angie Ngoc; Jeppesen, Søren

    2018-01-01

    This chapter draws on a study investigating what corporate social responsibility (CSR) means to Vietnam’s small- and medium-size enterprise (SME) owner/managers and workers, using Scott’s three-pillar (norms, regulation, cognition) institutional framework. The findings are based on factory visits...... and interviews with 40 managers/owners and 218 workers conducted in two sectors—textile/garment/footwear (TGF) and food/beverage processing (FBP)—around Ho Chi Minh City in 2011. Scott’s framework is useful in highlighting similarities and differences between these two sectors. We found more stringent state...... regulation and greater industry pressure with regard to quality and safety of products than to labour standards in both sectors. Most factories in the TGF sector assembled products for global supply chains and were under pressure by industry norms, while most companies in the FBP sector produced...

  19. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    This article has a twofold ambition. It offers a history of landscaping at Søby brown coal beds—a former mining site in western Denmark—and a methodological discussion of how to write such a study. Exploring this specific industrial landscape through a series of projects that have made different...... natural resources appear, we show that even what is recognized as resources shifts over time according to radically different and unpredictable agendas. This indicates that the Søby landscape is fundamentally volatile, as its resourcefulness has been seen interchangeably to shift between the brown coal...... business, inexpensive estates for practically savvy people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscape history, motivated by what we refer to as industriousness, to show that, at sites such as Søby, both natural resources and historical...

  20. Industrial vision

    DEFF Research Database (Denmark)

    Knudsen, Ole

    1998-01-01

    This dissertation is concerned with the introduction of vision-based application s in the ship building industry. The industrial research project is divided into a natural seq uence of developments, from basic theoretical projective image generation via CAD and subpixel analysis to a description...... is present ed, and the variability of the parameters is examined and described. The concept of using CAD together with vision information is based on the fact that all items processed at OSS have an associated complete 3D CAD model that is accessible at all production states. This concept gives numerous...... possibilities for using vision in applications which otherwise would be very difficult to automate. The requirement for low tolerances in production is, despite the huge dimensions of the items involved, extreme. This fact makes great demands on the ability to do robust sub pixel estimation. A new method based...

  1. Industry trends

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This section discusses the US energy supply and demand situation including projections for energy use, the clean coal industry (constraints of regulation on investment in new technologies, technology trends, and current pollution control efficiency), opportunities in clean coal technology (Phase 2 requirements of Title 4 of the Clean Air Act, scrubber demand for lime and limestone, and demand for low sulfur coal), and the international market of clean coal technologies

  2. Industrial melanism

    Energy Technology Data Exchange (ETDEWEB)

    Ford, E B

    1969-01-01

    Certain species of Lepidoptera have undergone a mutation in pigment color from white to black in order to be more concealing when in soot discolored environments in polluted industrial areas in England. In less polluted areas the original white variety continues to prosper. The two forms result from alleles of a color-controlling gene. The black variety is inconspicuous to insects when it settles on trees and rocks which are covered with soot.

  3. Agribusiness Industry

    Science.gov (United States)

    2007-01-01

    sheer enormity of this ultra modernized industry. Hybridized or biotech corn seeds are now nearly impervious to pesticides and herbicides. From...efficient routes of commerce of many thousands of miles - a fresh head of broccoli and lettuce lands in the chilled and computer controlled misting...cumulatively, seemingly minor and insignificant changes in food production methods (i.e. packaged precut lettuce ), society (desire for convenience foods

  4. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2007-01-01

    World production of industrial garnet was about 326 kt in 2006, with the U.S. producing about 11 percent of this total. U.S. consumption, imports, and exports were estimated at 74.3 kt, 52.3 kt, and 13.2 kt, respectively. The most important exporters are Australia, China, and India. Although demand is expected to rise over the next 5 years, prices are expected to remain low in the short term.

  5. Transformational III-V Electronics

    KAUST Repository

    Nour, Maha A.

    2014-01-01

    Flexible electronics using III-V materials for nano-electronics with high electron mobility and optoelectronics with direct band gap are attractive for many applications. This thesis describes a complementary metal oxide semiconductor (CMOS

  6. Complexes of lanthanum(III), cerium(III), samarium(III) and dysprosium(III) with substituted piperidines

    Energy Technology Data Exchange (ETDEWEB)

    Manhas, B S; Trikha, A K; Singh, H; Chander, M

    1983-11-01

    Complexes of the general formulae M/sub 2/Cl/sub 6/(L)/sub 3/.C/sub 2/H/sub 5/OH and M/sub 2/(NO/sub 3/)/sub 6/(L)/sub 2/.CH/sub 3/OH have been synthesised by the reactions of chlorides and nitrates of La(III), Ce(III), Sm(III) and Dy(III) with 2-methylpiperidine, 3-methylpiperidine and 4-methylpiperidine. These complexes have been characterised on the basis of their elemental analysis, and IR and electronic reflectance spectra. IR spectral data indicate the presence of coordinated ethanol and methanol molecules and bidentate nitrate groups. Coordination numbers of the metal ions vary from 5 to 8. 19 refs.

  7. Celestine III and the North

    DEFF Research Database (Denmark)

    Nielsen, Torben Kjersgaard

    2008-01-01

    Artiklen gennemgår pave Cølestin IIIs forhold til de nordiske kongeriger i perioden 1191-1198. Artiklen viser, at paven, som i forskningen traditionelt år har stået i skyggen af sin berømte, energiske og især: yngre efterfølger, Innocens III, har været på forkant med udviklingen i de nordiske rig...

  8. Oxidation of Ce(III) in Foam Decontaminant by Ozone

    International Nuclear Information System (INIS)

    Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B.; Lee, J. S.

    2016-01-01

    A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data

  9. Oxidation of Ce(III) in Foam Decontaminant by Ozone

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, J. S. [Gachon University, Seongnam (Korea, Republic of)

    2016-10-15

    A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data.

  10. The Challenges of Basel III for Romanian Banking System

    Directory of Open Access Journals (Sweden)

    Anca Elena NUCU

    2011-12-01

    Full Text Available Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the impact of Basel III upon banking system in Romania is considered to be limited. The measures which credit institutions could take to mitigate the impact of alignment with the new standards are business model adjustment and balance sheet restructuring.

  11. Some Considerations Regarding the Implementation of Basel III

    Directory of Open Access Journals (Sweden)

    Mihai Dorel Vlad

    2016-09-01

    Full Text Available Basel III represents a basic revision of the banking industry regulatory and supervisory framework for the future, the objective being the stability consolidation of the financial system. The objective of this article is to analyze the impact of the Basel III implementation upon the banking system at the European level, and respectively, upon the banking system of Romania. Basel III standards have been elaborated as a response of the 2008 financial crisis and are considered as vital for the assurance of financial institution capitalization against future financial shocks. The new standards have as an object the improvement of risk management, increased requirements of transparency and publication of credit institutions, as well as solving the banks problems of systemical importance. The measures that the credit institutions could adopt in order to mitigate the impact of alignment to the new standards are adjusting the business model and restructuring bank balance sheets.

  12. Industrial goals

    International Nuclear Information System (INIS)

    Martin, P.

    2005-01-01

    The aim of the third seminar on pellet-clad interaction, which held at Aix en Provence (France) from 9-11 march 2004, was to draw a comprehensive picture of current understanding of pellet clad interaction and its impact on the fuel rod under the widest possible conditions. This document provides the summaries of the five sessions: opening and industrial goals, fuel material behaviour in PCI situation, cladding behaviour relevant to PCI, in-pile rod behaviour, modelling of the mechanical interaction between pellet and cladding. (A.L.B.)

  13. Industrial ventilation

    Science.gov (United States)

    Goodfellow, H. D.

    Industrial ventilation design methodology, using computers and using fluid dynamic models, is considered. It is noted that the design of a ventilation system must be incorporated into the plant design and layout at the earliest conceptual stage of the project. A checklist of activities concerning the methodology for the design of a ventilation system for a new facility is given. A flow diagram of the computer ventilation model shows a typical input, the initialization and iteration loop, and the output. The application of the fluid dynamic modeling techniques include external and internal flow fields, and individual sources of heat and contaminants. Major activities for a ventilation field test program are also addressed.

  14. Industrial development in Indonesia - key data

    International Nuclear Information System (INIS)

    Gocht, W.

    1993-01-01

    In the case of Indonesia 3 goals in particular were linked to the industrial process: to improve the balance of payments, to reduce unemployment and to develop remote regions. Thus, development plans and official development policy have not adopted merely one strategic approach to industrialization, but have combined several: export diversification, promition of labour-intensive, small-scale and large-scale enterprises, and industrial production linked to basic needs. In 1991 the KfW gave financial support to the following projects: transformer plant and Suralaya, railway investment programme, electricity transmission system Krian-Paiton, supply of 3 ferries, staff development fund III. (BWI) [de

  15. Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

    Directory of Open Access Journals (Sweden)

    A. N. Sonar

    2011-01-01

    Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

  16. Localización empresarial en Aragón: una aplicación empírica de la ayuda a la decisión multicriterio tipo ELECTRE I y III. Robustez de los resultados obtenidos = Industrial Location Decisions in Aragon: an Empirical Application of a Multi-criterion Methodology of Aid to the Decision using ELECTRE Methods I and III. Robustness of the Obtained Results

    Directory of Open Access Journals (Sweden)

    García Cebrián, Lucía Isabel

    2009-01-01

    Full Text Available La decisión de la localización es una de las opciones estratégicas más importantes que tienen que tomar las empresas, con influencia directa sobre su competitividad. Por este motivo, se han desarrollado numerosas metodologías que ayudan en la toma de estas decisiones. En este trabajo, se realiza una aplicación empírica de una metodología de ayuda a la decisión multicriterio; específicamente, se ha optado por el método ELECTRE en sus versiones I y III, con el fin de seleccionar el mejor emplazamiento para una empresa. Para esta aplicación, se utilizan como alternativas de localización las Comarcas de Aragón, como factores de localización se utilizan 8 criterios y como peso o importancia de esos factores los obtenidos mediante una encuesta. Además, se aporta evidencia sobre la consistencia de los resultados obtenidos. Como se aprecia en el trabajo, aunque la tipología de los problemas a los que van destinados ambos métodos son distintos, los resultados obtenidos pueden ser considerados como consistentes. = The location decision is one of the most important strategic decisions that have to take the firms, with direct influence on their competitiveness. For this reason, many methodologies have been developed to help in the decision making. In this paper, we make an empirical application of a multi-criterion methodology of aid to the decision; specifically, ELECTRE method has been chosen in its versions I and III, in order to select the best place for a firm. The alternatives are counties in Aragon (Spain, and we use eight criteria. The weight has been obtained by surveys. In addition, evidence is contributed about the consistency of the obtained results. Though the typology of the problems to which both methods are destined are different, the obtained results can be considered consistent.

  17. Industrial chemistry engineering

    International Nuclear Information System (INIS)

    1993-01-01

    This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

  18. Industrial irradiation

    International Nuclear Information System (INIS)

    Stirling, Andrew

    1995-01-01

    Production lines for rubber gloves would not appear to have much in common with particle physics laboratories, but they both use accelerators. Electron beam irradiation is often used in industry to improve the quality of manufactured goods or to reduce production cost. Products range from computer disks, shrink packaging, tyres, cables, and plastics to hot water pipes. Some products, such as medical goods, cosmetics and certain foodstuffs, are sterilized in this way. In electron beam irradiation, electrons penetrate materials creating showers of low energy electrons. After many collisions these electrons have the correct energy to create chemically active sites. They may either break molecular bonds or activate a site which promotes a new chemical linkage. This industrial irradiation can be exploited in three ways: breaking down a biological molecule usually renders it useless and kills the organism; breaking an organic molecule can change its toxicity or function; and crosslinking a polymer can strengthen it. In addition to traditional gamma irradiation using isotopes, industrial irradiation uses three accelerator configurations, each type defining an energy range, and consequently the electron penetration depth. For energies up to 750 kV, the accelerator consists of a DC potential applied to a simple wire anode and the electrons extracted through a slot in a coaxially mounted cylindrical cathode. In the 1-5 MeV range, the Cockcroft-Walton or Dynamitron( R ) accelerators are normally used. To achieve the high potentials in these DC accelerators, insulating SF6 gas and large dimension vessels separate the anode and cathode; proprietary techniques distinguish the various commercial models available. Above 5 MeV, the size of DC accelerators render them impractical, and more compact radiofrequency-driven linear accelerators are used. Irradiation electron beams are actually 'sprayed' over the product using a magnetic deflection system. Lower energy beams of

  19. Adsorption of gold (III) from aqueous solutions on bagasse ash

    International Nuclear Information System (INIS)

    Hussain, G.; Khan, M.A.

    2011-01-01

    To assess the potential of cheap biomass materials for the recovery of gold from industrial, and electroplating waste water effluents, adsorption of gold (III) from dilute solutions of hydrochloric acid on bagasse ash has been studied under various experimental conditions by using batch technique. Percentage extraction of gold (III) on bagasse ash was determined from its distribution coefficients as a function of contact time, pH, adsorbent, adsorbate concentrations, and temperature. The uptake of gold (III) by bagasse ash is time, pH, metal concentration, amount of adsorbate, and temperature dependent. Adsorption data have been interpreted in terms of Langmuir, and the Freundlich equations. Thermodynamic parameters for the adsorption of gold (III) on bagasse ash have been determined at three different temperatures. The positive value of heat of adsorption; delta H 44.52 kJ/mol shows that the adsorption of gold (III) on bagasse ash is endothermic where as the negative value of delta G = -0.5303 kJ/mol at 318 K shows the spontaneity of the process. Delta G becomes more negative with increase in temperature which shows that the adsorption is more favorable at higher temperatures. Under the optimal adsorption conditions the adsorption capacity of gold is 0.70 mg /g of the adsorbent out of which 0.65 mg of gold gets desorbed with 0.1 % thiourea solution. (author)

  20. Kinetics of Cr(III) and Cr(VI) removal from water by two floating macrophytes.

    Science.gov (United States)

    Maine, M A; Hadad, H R; Sánchez, G; Caffaratti, S; Pedro, M C

    2016-01-01

    The aim of this work was to compare Cr(III) and Cr(VI) removal kinetics from water by Pistia stratiotes and Salvinia herzogii. The accumulation in plant tissues and the effects of both Cr forms on plant growth were also evaluated. Plants were exposed to 2 and 6 mg L(-1) of Cr(III) or Cr(VI) during 30 days. At the end of the experiment, Cr(VI) removal percentages were significantly lower than those obtained for Cr(III) for both macrophytes. Cr(III) removal kinetics involved a fast and a slow component. The fast component was primarily responsible for Cr(III) removal while Cr(VI) removal kinetics involved only a slow process. Cr accumulated principally in the roots. In the Cr(VI) treatments a higher translocation from roots to aerial parts than in Cr(III) treatments was observed. Both macrophytes demonstrated a high ability to remove Cr(III) but not Cr(VI). Cr(III) inhibited the growth at the highest studied concentration of both macrophytes while Cr(VI) caused senescence. These results have important implications in the use of constructed wetlands for secondary industrial wastewater treatment. Common primary treatments of effluents containing Cr(VI) consists in its reduction to Cr(III). Cr(III) concentrations in these effluents are normally below the highest studied concentrations in this work.

  1. From academy to industry

    International Nuclear Information System (INIS)

    Chatal, J.F.

    2015-01-01

    Full text of publication follows. Clinical efficacy of radioimmunotherapy (RIT) has been clearly documented in the consolidation situation, such as first line treatment of indolent Non Hodgkin Lymphoma after induction chemotherapy [1] or after salvage resection of liver metastases from colon carcinoma [2], when tumor targets have a small, preferably microscopic, size. In this favorable situation RIT, which is a targeted therapy with toxicity limited to hematological toxicity, has a great potential and could be competitive with chemotherapy in particular for solid tumors. Such potential has been recently demonstrated in prostate cancer [3]. A lot of academic preclinical studies have been performed using multiple antibodies and antibody formats labeled with varied beta-emitting and more recently alpha particle-emitting radionuclides. With regard to other targeted therapies, the efficacy of RIT has been fully recognized and academic preclinical studies have been extended to a lot of clinical phase I/II studies but a limited number of phase II studies. Paradoxically, despite quite encouraging results, the number of industrially implemented phase III studies has been limited to the fingers of one hand illustrating a gap between academy and industry. For the last ten years only 2 ARCs (Antibody Radio Conjugates) (Zevalin and Bexxar) have been approved. The reasons for such a gap are complex and multiple but they could be summarized in one word: Money. The cost for a phase III study, enrolling hundreds of patients, exceeds the financial capabilities of most radiopharmaceutical companies and, up to now, Big Pharmas did not dare to invest in this field of RIT in part because they are not familiar with the use of radionuclides and prefer to develop ADCs (Antibody Drug Conjugates) even if they are generally more toxic and no more efficient than ARCs. For the future of RIT it is crucial to succeed in convincing Big Pharmas to invest in this field of ARCs. For this purpose it

  2. Industrial robot

    Science.gov (United States)

    Prakashan, A.; Mukunda, H. S.; Samuel, S. D.; Colaco, J. C.

    1992-11-01

    This paper addresses the design and development of a four degree of freedom industrial manipulator, with three liner axes in the positioning mechanism and one rotary axis in the orientation mechanism. The positioning mechanism joints are driven with dc servo motors fitted with incremental shaft encoders. The rotary joint of the orientation mechanism is driven by a stepping motor. The manipulator is controlled by an IBM 386 PC/AT. Microcomputer based interface cards have been developed for independent joint control. PID controllers for dc motors have been designed. Kinematic modeling, dynamic modeling, and path planning have been carried out to generate the control sequence to accomplish a given task with reference to source and destination state constraints. This project has been sponsored by the Department of Science and Technology, Government of India, New Delhi, and has been executed in collaboration with M/s Larsen & Toubro Ltd, Mysore, India.

  3. Industrial radiography

    International Nuclear Information System (INIS)

    1992-01-01

    Industrial radiography is a non-destructive testing (NDT) method which allows components to be examined for flaws without interfering with their usefulness. It is one of a number of inspection methods which are commonly used in industry to control the quality of manufactured products and to monitor their performance in service. Because of its involvement in organizing training courses in all the common NDT methods in regional projects in Asia and the Pacific and Latin America and the Caribbean and in many country programmes, the Agency is aware of the importance of standardizing as far as possible the syllabi and training course notes used by the many experts who are involved in presenting the training courses. IAEA-TECDOC-628 ''Training Guidelines in Non-destructive Testing'' presents syllabi which were developed by an Agency executed UNDP project in Latin America and the Caribbean taking into account the developmental work done by the International Committee for Non-destructive Testing. Experience gained from using the radiography syllabi from TECDOC-628 at national and regional radiography training courses in the Agency executed UNDP project in Asia and the Pacific (RAS/86/073) showed that some guidance needed to be given to radiography experts engaged in teaching at these courses on the material which should be covered. The IAEA/UNDP Asia and Pacific Project National NDT Coordinators therefore undertook to prepare Radiography Training Course Notes which could be used by experts to prepare lectures for Level 1,2 and 3 radiography personnel. The notes have been expanded to cover most topics in a more complete manner than that possible at a Level 1, 2 or 3 training course and can now be used as source material for NDT personnel interested in expanding their knowledge of radiography. Refs, figs and tabs

  4. Making progress with PISC III

    International Nuclear Information System (INIS)

    Crutzen, S.; Nichols, R.; McDonald, N.

    1989-01-01

    The thirdphase of the Programme for the Inspection of Steel Components (PISC III) was begun in 1986 with the aim of assessing inspection capability and reliability for actual defects in full scale components under realistic nuclear power plant conditions. It is organized by the OECD Nuclear Energy Agency and the Ispra Joint Research Centre of the European Communities Commission. The objectives and status of each of the seven areas of PISC III are given. The areas are: real contaminated structures; full scale vessel tests; nozzles and dissimilar metal welds; austenitic steel testing; steam generator integrity testing; mathematical modelling of non-destructive examination; and human reliability studies. (U.K.)

  5. Graphics Gems III IBM version

    CERN Document Server

    Kirk, David

    1994-01-01

    This sequel to Graphics Gems (Academic Press, 1990), and Graphics Gems II (Academic Press, 1991) is a practical collection of computer graphics programming tools and techniques. Graphics Gems III contains a larger percentage of gems related to modeling and rendering, particularly lighting and shading. This new edition also covers image processing, numerical and programming techniques, modeling and transformations, 2D and 3D geometry and algorithms,ray tracing and radiosity, rendering, and more clever new tools and tricks for graphics programming. Volume III also includes a

  6. Progress in Industrial Mathematics at ECMI 2000

    CERN Document Server

    Capasso, Vincenzo; Greco, Antonio

    2002-01-01

    The European Consortium for Mathematics in Industry (ECMI) was founded in 1986 by leading groups of mathematicians in Europe for the following scopes: i) direct involvement of mathematicians in R&D activities; ii) international cooperation at a European scale; iii) education of industrial mathematicians to meet the growing demand for such experts. ECMI 2000 shows that ECMI has offered a unique example of effective international cooperation thanks to the financial support of the European Framework programmes. In particular they have helped ECMI establishing a set of Special Interest Groups to favour interaction with industry . This volume includes minisymposia about their activities, in particular microelectronics, glass, polymers, finance, traffic, and textiles. Applied mathematicians and other professionals working in academia or industry will find the book to be a useful and stimulating source of mathematical applications related to industrial problems.

  7. Minerals Yearbook, volume III, Area Reports—International

    Science.gov (United States)

    ,

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  8. Organometallic neptunium(III) complexes.

    Science.gov (United States)

    Dutkiewicz, Michał S; Farnaby, Joy H; Apostolidis, Christos; Colineau, Eric; Walter, Olaf; Magnani, Nicola; Gardiner, Michael G; Love, Jason B; Kaltsoyannis, Nikolas; Caciuffo, Roberto; Arnold, Polly L

    2016-08-01

    Studies of transuranic organometallic complexes provide a particularly valuable insight into covalent contributions to the metal-ligand bonding, in which the subtle differences between the transuranium actinide ions and their lighter lanthanide counterparts are of fundamental importance for the effective remediation of nuclear waste. Unlike the organometallic chemistry of uranium, which has focused strongly on U(III) and has seen some spectacular advances, that of the transuranics is significantly technically more challenging and has remained dormant. In the case of neptunium, it is limited mainly to Np(IV). Here we report the synthesis of three new Np(III) organometallic compounds and the characterization of their molecular and electronic structures. These studies suggest that Np(III) complexes could act as single-molecule magnets, and that the lower oxidation state of Np(II) is chemically accessible. In comparison with lanthanide analogues, significant d- and f-electron contributions to key Np(III) orbitals are observed, which shows that fundamental neptunium organometallic chemistry can provide new insights into the behaviour of f-elements.

  9. Ion temperatures in TORTUR III

    International Nuclear Information System (INIS)

    Hendriks, F.B.

    1985-12-01

    Spatially resolved ion-energy distributions are presented for discharges in the TORTUR III tokamak. The measurements are performed in an active method, using a neutral hydrogen probing beam of 20-30 keV, to enhance charge-exchange processes along its path, as well as by the usual passive method. Ion temperatures can amount up to 1 keV

  10. Industrial radiographies

    CERN Multimedia

    2005-01-01

    The Radiation Protection group wishes to remind CERN staff responsible for contractors performing X-ray inspections on the CERN sites that the firms must apply the legislation in force in their country of origin, in particular with regard to the prevention of risks relating to ionizing radiation. Industrial radiography firms called on to work on the CERN sites must also comply with the rules laid down in CERN's Radiation Safety Manual and be registered in the relevant CERN database. Since CERN is responsible for safety on its own site, a number of additional rules have been laid down for this kind of work, as set out in Radiation Protection Procedure PRP30 https://edms.cern.ch/file/346848/LAST_RELEASED/PRP30.pdf The CERN Staff Member responsible for the contract shall register the company and issue notification that an X-ray inspection is to be performed via the web interface at the following address: http://cern.ch/rp-radio

  11. Training industry needs & Technology Industry needs

    NARCIS (Netherlands)

    Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

    2017-01-01

    This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

  12. Industry wage differentials, rent sharing and gender: three empirical essays

    OpenAIRE

    Tojerow, Ilan

    2008-01-01

    This thesis focuses on the industry wage differentials, rent-sharing and the gender wage gap. I empirically investigate: i) the interaction between inter-industry wage differentials and the gender wage gap in six European countries, ii) how rent sharing interacts with the gender wage gap in the Belgian private sector and iii) the existence of inter-industry wage differentials in Belgium, through the unobserved ability hypothesis.The first chapter is devoted to the analysis of the interaction ...

  13. Synthesis and characterization of La(III), Pr(III), Nd(III), Sm(III), Eu(III), Gd(III), Tb(III) and Dy(III) complexes of 2-acetylfuran-2-thenoylhydrazone

    International Nuclear Information System (INIS)

    Singh, B.; Singh, Praveen K.

    1998-01-01

    The reaction of 2-acetylfuran-2-thenoylhydrazone(afth) with Ln(III) trichlorides yields complexes of the type [Ln(afth)Cl 2 (H 2 O)(EtOH)]Cl, [Ln(III) = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy]. The complexes have been characterized by molar conductance, magnetic susceptibility and TGA and DTA measurements, magnetic susceptibility and TGA and DTA measurements, FAB mass, infrared, proton NMR, electronic absorption and emission spectra. The terbium complex is found to be monomer from the FAB mass spectrum. The IR and NMR spectra suggest neutral tridentate behaviour of the Schiff base. A coordination number seven is proposed around the metal ions. Emission spectra suggest C 3v , symmetry around the metal ion with capped octahedron geometry for the europium complex. (author)

  14. Technology and the uranium industry

    International Nuclear Information System (INIS)

    Pool, T.C.

    2002-01-01

    Continuing economic and regulatory pressures on the uranium industry can be countered only through advances in technology. Low prices, the 'ALARA' principle, and concerns about 'sustainability' require the industry to continually improve upon its already impressive record of performance. Technological improvement in the uranium industry is necessary in order to: (a) Maintain our resource base through the discovery of ever deeper deposits; (b) Improve the efficiency with which we may exploit (i) very high-grade deposits by remote underground mining methods (ii) very low-grade deposits with environmentally-benign, in situ leaching methods - and (iii) moderate-grade, near-surface deposits by open-pit mining methods (c) Meet increasingly stringent and, in many cases, arbitrary and unrealistic environmental and safety requirements; and (d) Cope with increasing competition from an expanding number of sources of secondary supply. Manifestations of the uranium industry's ability to improve its performance through technology can be seen in many ways including: a continuing reduction in production costs; large gains in productivity; and a truly superior record of employee safety. Maintenance of these trends requires both innovation and the open sharing of information. (author)

  15. STRATEGI PEMASARAN PROGRAM STUDI DIPLOMA III USAHA PERJALANAN WISATA UNIVERSITAS JEMBER

    Directory of Open Access Journals (Sweden)

    Margaretta Andini Nugroho

    2017-09-01

    Full Text Available A marketing strategy is needed by Program Studi Diploma III Usaha Perjalanan Wisata (PS D-III UPW of Jember University, in order to increase more students. Since the last few years, the students of PS D-III UPW has been decreased. This study has the objective to identify strengths, weaknesses, opportunities and threats of PS D-III UPW, and formulate the marketing strategy, by using analysis method of IFAS, EFAS, SWOT and QSPM. The result of IFAS and EFAS identify that PS D-III UPW has 16 factors of strength, 14 factors of weakness, 6 factors of opportunity and 3 factors of threat. The result of SWOT identifies some alternative strategies, which are technology information, student motivation, cooperation within tourism industry, promotion, facilities, competitive product, learning system, quality of human resource, and involvement of the students at Jember tourism events. The QSPM identifies that improvement of promotion as the first priority strategy.

  16. Sorption of trace amounts of gallium (III) on iron (III) oxide

    Energy Technology Data Exchange (ETDEWEB)

    Music, S; Gessner, M; Wolf, R H.H. [Institut Rudjer Boskovic, Zagreb (Yugoslavia)

    1979-01-01

    The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied.

  17. Sorption of trace amounts of gallium (III) on iron (III) oxide

    International Nuclear Information System (INIS)

    Music, S.; Gessner, M.; Wolf, R.H.H.

    1979-01-01

    The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied. (orig.) [de

  18. The Negotiation of Basel III

    DEFF Research Database (Denmark)

    Just, Sine Nørholm

    2015-01-01

    While the Basel Accords of 1988 and 2004 (Basel I and Basel II) ostensibly set out to regulate bank risk at the international level, they were effectively in the grip of neoliberal beliefs in the self-regulating potential of free markets. In 2009–2011, the Basel Accords were revised once more wit...... agency, the empirical argument is substantiated through textual–intertextual analysis of the rhetorical circulation of affective signs in the Basel III negotiations....

  19. Firebird-III program description

    International Nuclear Information System (INIS)

    Lin, M.R.; Prawirosochardjo, S.; Rennick, D.F.; Wessman, E.; Blain, R.J.D.; Wilson, J.M.

    1979-09-01

    The FIREBIRD-III digital computer program is a general network code developed primarily for predicting the thermalhydraulic behaviour of CANDU power reactors during a postulated loss-of-coolant accident and the subsequent emergency coolant injection. Because of its flexibility, the code can also be used to solve a large variety of general two-phase flow problems. This report describes the thermalhydraulic models and the computation methods used in the program

  20. Revised SNAP III Training Manual

    Energy Technology Data Exchange (ETDEWEB)

    Moss, Calvin Elroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gonzales, Samuel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nelson, Mark Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rothrock, Richard Brian [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Salazar, Samuel A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sorensen, Eric Byron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sundby, Gary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-21

    The Shielded Neutron Assay Probe (SNAP) technique was developed to determine the leakage neutron source strength of a radioactive object. The original system consisted of an EberlineTM Mini-scaler and discrete neutron detector. The system was operated by obtaining the count rate with the EberlineTM instrument, determining the absolute efficiency from a graph, and calculating the neutron source strength by hand. In 2003 the SNAP III, shown in Figure 1, was designed and built. It required the operator to position the SNAP, and then measure the source-to-detector and detectorto- reflector distances. Next the operator entered the distance measurements and started the data acquisition. The SNAP acquired the required count rate and then calculated and displayed the leakage neutron source strength (NSS). The original design of the SNAP III is described in SNAP III Training Manual (ER-TRN-PLN-0258, Rev. 0, January 2004, prepared by William Baird) This report describes some changes that have been made to the SNAP III. One important change is the addition of a LEMO connector to provide neutron detection output pulses for input to the MC-15. This feature is useful in active interrogation with a neutron generator because the MC-15 has the capability to only record data when it is not gated off by a pulse from the neutron generator. This avoids recording of a lot of data during the generator pulses that are not useful. Another change was the replacement of the infrared RS-232 serial communication output by a similar output via a 4-pin LEMO connector. The current document includes a more complete explanation of how to estimate the amount of moderation around a neutron-emitting source.

  1. Titanium gettering in Doublet III

    International Nuclear Information System (INIS)

    de Grassie, J.S.; Callis, R.; Campbell, G.

    1980-08-01

    The application of mild titanium gettering in the Doublet III tokamak has led to a significant improvement in the obtainable operating regimes and discharge parameters for all of the many plasma cross-sectional shapes studied. With gettering, low-Z impurities and radiated power are greatly reduced. The maximum line averaged electron density has increased 50% (anti n/sub e max/ approx. 1 x 10 20 /m 3 ), corresponding to a Murakami coefficient of nearly 6

  2. Improving Minuteman III Maintenance Concepts

    Science.gov (United States)

    2017-03-23

    the ground . Then figure out what your challenges are. We’ll have those” (Pappalardo, 2011). Another challenge facing the maintenance personnel...as assets aged as indicated by the pattern ‘B’ shown in Figure 2. With the increase in the mechanization of processes, more attention has been...concepts could be applied to the sustainment of the MM III as well as benefit its planned replacement, the Ground Based Strategic Deterrent (GBDS

  3. French participation to PISC III

    International Nuclear Information System (INIS)

    Birac, C.

    1994-06-01

    The PISC III programme was set up in 1986 after the conclusions of the PISC II programme. The main objective was assessment of ISI procedures on few particular components or materials. France with IPSN, CEA/DTA, DCN INDRET, EDF, FRAMATOME and INTERCONTROLE decided to have an important participation in several of the eight actions. This paper describes shortly the key points of this participation and the consequences in France. (authors). 10 figs., 1 tab

  4. Basel III and Asset Securitization

    Directory of Open Access Journals (Sweden)

    M. Mpundu

    2013-01-01

    Full Text Available Asset securitization via special purpose entities involves the process of transforming assets into securities that are issued to investors. These investors hold the rights to payments supported by the cash flows from an asset pool held by the said entity. In this paper, we discuss the mechanism by which low- and high-quality entities securitize low- and high-quality assets, respectively, into collateralized debt obligations. During the 2007–2009 financial crisis, asset securitization was seriously inhibited. In response to this, for instance, new Basel III capital and liquidity regulations were introduced. Here, we find that we can explicitly determine the transaction costs related to low-quality asset securitization. Also, in the case of dynamic and static multipliers, the effects of unexpected negative shocks such as rating downgrades on asset price and input, debt obligation price and output, and profit will be quantified. In this case, we note that Basel III has been designed to provide countercyclical capital buffers to negate procyclicality. Moreover, we will develop an illustrative example of low-quality asset securitization for subprime mortgages. Furthermore, numerical examples to illustrate the key results will be provided. In addition, connections between Basel III and asset securitization will be highlighted.

  5. Organometallic neptunium(III) complexes

    Science.gov (United States)

    Dutkiewicz, Michał S.; Farnaby, Joy H.; Apostolidis, Christos; Colineau, Eric; Walter, Olaf; Magnani, Nicola; Gardiner, Michael G.; Love, Jason B.; Kaltsoyannis, Nikolas; Caciuffo, Roberto; Arnold, Polly L.

    2016-08-01

    Studies of transuranic organometallic complexes provide a particularly valuable insight into covalent contributions to the metal-ligand bonding, in which the subtle differences between the transuranium actinide ions and their lighter lanthanide counterparts are of fundamental importance for the effective remediation of nuclear waste. Unlike the organometallic chemistry of uranium, which has focused strongly on UIII and has seen some spectacular advances, that of the transuranics is significantly technically more challenging and has remained dormant. In the case of neptunium, it is limited mainly to NpIV. Here we report the synthesis of three new NpIII organometallic compounds and the characterization of their molecular and electronic structures. These studies suggest that NpIII complexes could act as single-molecule magnets, and that the lower oxidation state of NpII is chemically accessible. In comparison with lanthanide analogues, significant d- and f-electron contributions to key NpIII orbitals are observed, which shows that fundamental neptunium organometallic chemistry can provide new insights into the behaviour of f-elements.

  6. FutureTox III: Bridges for Translation | Science Inventory | US ...

    Science.gov (United States)

    The present document describes key discussion points and outcomes of a Society of Toxicology (SOT) Contemporary Concepts in Toxicology (CCT) Workshop, entitled FutureTox III1,2 that was held in Crystal City, Virginia, November 19-20, 2015. The workshop built on the many lessons learned from the first 10 years of TT21 and the first two workshops in the FutureTox series (for summary of FutureTox II see (Knudsen et al., 2015); for summary of FutureTox I see (Rowlands et al., 2014)). FutureTox III was attended in person and via webcast by more than 300 scientists from government research and regulatory agencies, research institutes, academia, and the chemical and pharmaceutical industries in Europe, Canada, and the United States. The meeting materials for FutureTox III, currently available to meeting registrants at http://www.toxicology.org/events/shm/cct/meetings.asp#upcoming-pnl-open, will be open to the public on November 29, 2016. At this workshop, participants reviewed and discussed the state of the science in toxicology and human risk and exposure assessment with a focus on moving TT21 science into the arena of regulatory decision-making. This manuscript describes the outcome of the FutureTox III 'contemporary concepts in toxicology' conference of the Society Toxicology, held November 2015 in Crystal City VA.

  7. Rethinking ASME III seismic analysis for piping operability evaluations

    International Nuclear Information System (INIS)

    Adams, T.M.; Stevenson, J.D.

    1994-01-01

    It has been recognized since the mid 1980's that there are very large seismic margins to failure for nuclear piping systems when designed using current industry practice, design criteria, and methods. As a result of this realization there are or have been approximately eighteen initiatives within the ASME , Boiler and Pressure Vessel Code Section III, Division 1, in the form of proposed code cases and proposed code text changes designed to reduce these failure margins to more realistic values. For the most part these initiatives have concentrated on reclassifying seismic inertia stresses in the piping as secondary and increasing the allowable stress limits permitted by Section III of the ASME, Boiler Code. This paper focuses on the application of non-linear spectral analysis methods as a method to reduce the input seismic demand determination and thereby reduce the seismic failure margins. The approach is evaluated using the ASME Boiler Pressure Vessel Code Section III Subgroup on Design benchmark procedure as proposed by the Subgroup's Special Task Group on Integrated Piping Criteria. Using this procedure, criteria are compared to current code criterion and analysis methods, and several other of the currently proposed Boiler and Pressure Vessel, Section III, changes. Finally, the applicability of the non-linear spectral analysis to continued Safe Operation Evaluations is reviewed and discussed

  8. Study of type III ELMs in JET

    NARCIS (Netherlands)

    Sartori, R.; Saibene, G.; Horton, L. D.; Becoulet, M.; Budny, R.; Borba, D.; Chankin, A.; Conway, G. D.; Cordey, G.; McDonald, D.; Guenther, K.; von Hellermann, M. G.; Igithkanov, Y.; Loarte, A.; Lomas, P. J.; Pogutse, O.; Rapp, J.

    2004-01-01

    This paper presents the results of JET experiments aimed at studying the operational space of plasmas with a Type III ELMy edge, in terms of both local and global plasma parameters. In JET, the Type III ELMy regime has a wide operational space in the pedestal n(e)-T-e diagram, and Type III ELMs are

  9. The American nuclear power industry. A handbook

    International Nuclear Information System (INIS)

    Pearman, W.A.; Starr, P.

    1984-01-01

    This book presents an overview of the history and current organization of the American nuclear power industry. Part I focuses on development of the industry, including the number, capacity, and type of plants in commercial operation as well as those under construction. Part II examines the safety, environmental, antitrust, and licensing issues involved in the use of nuclear power. Part III presents case studies of selected plants, such as Three Mile Island and Seabrook, to illustrate some of the issues discussed. The book also contains a listing of the Nuclear Regulatory Commission libraries and a subject index

  10. Sparkle/PM3 for the modeling of europium(III), gadolinium(III), and terbium(III) complexes

    International Nuclear Information System (INIS)

    Freire, Ricardo O.; Rocha, Gerd B.; Simas, Alfredo M.

    2009-01-01

    The Sparkle/PM3 model is extended to europium(III), gadolinium(III), and terbium(III) complexes. The validation procedure was carried out using only high quality crystallographic structures, for a total of ninety-six Eu(III) complexes, seventy Gd(III) complexes, and forty-two Tb(III) complexes. The Sparkle/PM3 unsigned mean error, for all interatomic distances between the trivalent lanthanide ion and the ligand atoms of the first sphere of coordination, is: 0.080 A for Eu(III); 0.063 A for Gd(III); and 0.070 A for Tb(III). These figures are similar to the Sparkle/AM1 ones of 0.082 A, 0.061 A, and 0.068 A respectively, indicating they are all comparable parameterizations. Moreover, their accuracy is similar to what can be obtained by present-day ab initio effective core potential full geometry optimization calculations on such lanthanide complexes. Finally, we report a preliminary attempt to show that Sparkle/PM3 geometry predictions are reliable. For one of the Eu(III) complexes, BAFZEO, we created hundreds of different input geometries by randomly varying the distances and angles of the ligands to the central Eu(III) ion, which were all subsequently fully optimized. A significant trend was unveiled, indicating that more accurate local minima geometries cluster at lower total energies, thus reinforcing the validity of sparkle model calculations. (author)

  11. Europium (III) and americium (III) stability constants with humic acid

    International Nuclear Information System (INIS)

    Torres, R.A.; Choppin, G.R.

    1984-01-01

    The stability constants for tracer concentrations of Eu(III) and Am(III) complexes with a humic acid extracted from a lake-bottom sediment were measured using a solvent extraction system. The organic extractant was di(2-ethylhexyl)-phosphoric acid in toluene while the humate aqueous phase had a constant ionic strength of 0.1 M (NaClO 4 ). Aqueous humic acid concentrations were monitored by measuring uv-visible absorbances at approx.= 380 nm. The total carboxylate capacity of the humic acid was determined by direct potentiometric titration to be 3.86 +- 0.03 meq/g. The humic acid displayed typical characteristics of a polyelectrolyte - the apparent pKsub(a), as well as the calculated metal ion stability constants increased as the degree of ionization (α) increased. The binding data required a fit of two stability constants, β 1 and β 2 , such that for Eu, log β 1 = 8.86 α + 4.39, log β 2 = 3.55 α + 11.06 while for Am, log β 1 = 10.58 α + 3.84, log β 2 = 5.32 α + 10.42. With hydroxide, carbonate, and humate as competing ligands, the humate complex associated with the β 1 constant is calculated to be the dominant species for the trivalent actinides and lanthanides under conditions present in natural waters. (orig.)

  12. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition); Seguridad radiologica en la radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-15

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  13. The Mexican electricity industry - cogeneration potential

    International Nuclear Information System (INIS)

    Monroy, I.L.

    2000-01-01

    A brief history of Mexico's electric power industry is given. Diagrams show (i) the increase in primary energy production from 1990-1998; (ii) energy consumption by sector and (iii) the change in capacity between 1990 and 1998. The projected energy development for 1998-2007 is discussed. The Mexican government has chosen cogeneration to be an important contributor to future energy-efficient power production. Data on installed cogeneration capacity for years 2000 and 2001 are given according to sector

  14. Recent results for Mark III

    International Nuclear Information System (INIS)

    Brient, J.C.

    1987-12-01

    This paper presents recent results from the Mark III detector at SPEAR, in the open charm sector. The first topic discussed is the reanalysis of the direct measurement of the D hadronic branching fractions, where a detailed study has been made of the Cabibbo suppressed and multi-π 0 's D decays backgrounds in the double tag sample. Next, the Dalitz plot analysis of the D decays to Kππ is presented, leading to the relative fractions of three-body versus pseudoscalarvector decays. 7 refs., 5 figs

  15. Charm physics at BES III

    International Nuclear Information System (INIS)

    Wang Yifang

    2011-01-01

    Since the discovery of J/Ψ and the τ lepton in 70's, the study of τ-charm physics became very active: several dedicated e + e - colliders were built and tremendous progress were obtained. In this paper, the main reasoning,the content and the characteristics of the τ-charm physics study are discussed, together with the scientific motivations and the latest results of the recently completed upgrade of the Beijing Electron-Positron Collider (BEPC II) and the new Beijing Spectrometer (BES III). (authors)

  16. The Mark III vertex chamber

    International Nuclear Information System (INIS)

    Adler, J.; Bolton, T.; Bunnell, K.

    1987-07-01

    The design and construction of the new Mark III vertex chamber is described. Initial tests with cosmic rays prove the ability of track reconstruction and yield triplet resolutions below 50 μm at 3 atm using argon/ethane (50:50). Also performed are studies using a prototype of a pressurized wire vertex chamber with 8 mm diameter straw geometry. Spatial resolution of 35mm was obtained using dimethyl ether (DME) at 1 atm and 30 μm using argon/ethane (50/50 mixture) at 4 atm. Preliminary studies indicate the DME to adversely affect such materials as aluminized Mylar and Delrin

  17. Chemicals Industry Vision

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  18. Isothiocyanato complexes of Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl)benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, V K

    1982-01-01

    Six-coordinated complexes of the type (Ln(PyBzH)/sub 2/NCS.H/sub 2/O) (NCS)/sub 2/.nH/sub 2/O/mC/sub 2/H/sub 5/OH (Ln = Gd(III), Tb(III), Dy(III) and Ho(III), n=1-2; m=1) have been prepared from Ln(NCS)/sub 6//sup 3 -/. The room temperature magnetic moment values confirm the terpositive state of the lanthanide ions. Infrared spectra suggest the N-coordination of thiocyanate group. Electronic spectral studies of Tb(III), Dy(III) and Ho(III) complexes have been made in terms of LSJ term energies. 13 refs.

  19. Transformational III-V Electronics

    KAUST Repository

    Nour, Maha A.

    2014-04-01

    Flexible electronics using III-V materials for nano-electronics with high electron mobility and optoelectronics with direct band gap are attractive for many applications. This thesis describes a complementary metal oxide semiconductor (CMOS) compatible process for transforming traditional III-V materials based electronics into flexible one. The thesis reports releasing 200 nm of Gallium Arsenide (GaAs) from 200 nm GaAs / 300 nm Aluminum Arsenide (AlAs) stack on GaAs substrate using diluted hydrofluoric acid (HF). This process enables releasing a single top layer compared to peeling off all layers with small sizes at the same time. This is done utilizing a network of release holes that contributes to the better transparency (45 % at 724 nm wavelengths) observed. Fabrication of metal oxide semiconductor capacitor (MOSCAPs) on GaAs is followed by releasing it to have devices on flexible 200 nm GaAs. Similarly, flexible GaSb and InP fabrication process is also reported to transform traditional electronics into large-area flexible electronics.

  20. INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

    Directory of Open Access Journals (Sweden)

    Ahmad Kamil

    2015-10-01

    Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

  1. Thermodynamic model for solution behavior and solid-liquid equilibrium in Na-Al(III)-Fe(III)-Cr(III)-Cl-H2O system at 25°C

    Science.gov (United States)

    André, Laurent; Christov, Christomir; Lassin, Arnault; Azaroual, Mohamed

    2018-03-01

    The knowledge of the thermodynamic behavior of multicomponent aqueous electrolyte systems is of main interest in geo-, and environmental-sciences. The main objective of this study is the development of a high accuracy thermodynamic model for solution behavior, and highly soluble M(III)Cl3(s) (M= Al, Fe, Cr) minerals solubility in Na-Al(III)-Cr(III)-Fe(III)-Cl-H2O system at 25°C. Comprehensive thermodynamic models that accurately predict aluminium, chromium and iron aqueous chemistry and M(III) mineral solubilities as a function of pH, solution composition and concentration are critical for understanding many important geochemical and environmental processes involving these metals (e.g., mineral dissolution/alteration, rock formation, changes in rock permeability and fluid flow, soil formation, mass transport, toxic M(III) remediation). Such a model would also have many industrial applications (e.g., aluminium, chromium and iron production, and their corrosion, solve scaling problems in geothermal energy and oil production). Comparisons of solubility and activity calculations with the experimental data in binary and ternary systems indicate that model predictions are within the uncertainty of the data. Limitations of the model due to data insufficiencies are discussed. The solubility modeling approach, implemented to the Pitzer specific interaction equations is employed. The resulting parameterization was developed for the geochemical Pitzer formalism based PHREEQC database.

  2. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-[(1H-benzimidazol-2-yl-methylene) amino] phenol

    International Nuclear Information System (INIS)

    Omprakash, K.L.; Chandra Pal, A.V.; Reddy, M.L.N.

    1982-01-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO 4 ) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (logβ 2 ) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III). (author)

  3. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-((1H-benzimidazol-2-yl-methylene) amino) phenol

    Energy Technology Data Exchange (ETDEWEB)

    Omprakash, K L; Chandra Pal, A V; Reddy, M L.N. [Osmania Univ., Hyderabad (India). Dept. of Chemistry

    1982-03-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO/sub 4/) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (log..beta../sub 2/) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III).

  4. Banana peel: a green and economical sorbent for Cr(III) removal

    International Nuclear Information System (INIS)

    Memon, J.R.; Bhanger, M.I.; Memon, S.Q.

    2008-01-01

    Banana peel, a common fruit waste has been investigated to remove and preconcentrate Cr(III) from industrial wastewater. It was characterized by FT-IR spectroscopy. The parameters pH, contact time, initial metal ion concentration and temperature were investigated and the maximum sorption was found to be 95%. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 4. The retained species were eluted using 5 ml of 2 M HNO/sub 3/. The mechanism for the binding of Cr(III) on the banana peel surface was also studied in detail. The Langmuir and Dubinin-Radushkevich (D-R) isotherms were used to describe the partitioning behavior for the system at different temperatures. Kinetic and thermodynamic measurements of the banana peel for chromium ions were also studied. The method was applied for the removal and preconcentration of Cr(III) from industrial wastewater. (author)

  5. From a Music Industry to Sound Industries

    OpenAIRE

    Thor Magnusson

    2013-01-01

    Commodification has been an inherent aspect of music for many centuries. The aggregation of the diverse commodification practices could be described as an "industry," but this is an industry that has always been in a state of transition. New technologies, media formats, and practices appear regularly, requiring swift responses by the incumbent music industry. Although periods of relative stabil- ity have existed, where economic structures become established, the field has always been ch...

  6. Tobacco industry influence on the definition of tobacco related disorders by the American Psychiatric Association.

    Science.gov (United States)

    Neuman, M D; Bitton, A; Glantz, S A

    2005-10-01

    The Diagnostic and statistical manual of mental disorders, third edition (DSM-III), published by the American Psychiatric Association (APA) in 1980, included the first official definitions by the APA of tobacco dependence and tobacco withdrawal. Tobacco industry efforts to influence the DSM-III were investigated. Searches of previously secret tobacco industry documents, primarily the University of California San Francisco Legacy Tobacco Documents Library and British American Tobacco collections. Additional information was collected through discussions with editors of DSM-III, and library and general internet searches. The tobacco companies regarded the inclusion of tobacco dependence as a diagnosis in DSM-III as an adverse event. It worked to influence the content of the DSM-III and its impact following publication. These efforts included public statements and private lobbying of DSM-III editors and high ranking APA officers by prominent US psychiatrists with undisclosed ties to the tobacco industry. Following publication of DSM-III, tobacco companies contracted with two US professors of psychiatry to organise a conference and publish a monograph detailing controversies surrounding DSM-III. The tobacco industry and its allies lobbied to narrow the definition of tobacco dependence in serial revisions of DSM-III. Following publication of DSM-III, the industry took steps to try to mitigate its impact. These actions mirror industry tactics to influence medical research and policy in various contexts worldwide. Such tactics slow the spread of a professional and public understanding of smoking and health that otherwise would reduce smoking, smoking induced disease, and tobacco company profits.

  7. The SINTRAN III NODAL system

    International Nuclear Information System (INIS)

    Skaali, T.B.

    1980-10-01

    NODAL is a high level programming language based on FOCAL and SNOBOL4, with some influence from BASIC. The language was developed to operate on the computer network controlling the SPS accelerator at CERN. NODAL is an interpretive language designed for interactive use. This is the most important aspect of the language, and is reflected in its structure. The interactive facilities make it possible to write, debug and modify programs much faster than with compiler based languages like FORTRAN and ALGOL. Apart from a few minor modifications, the basic part of the Oslo University NODAL system does not differ from the CERN version. However, the Oslo University implementation has been expanded with new functions which enable the user to execute many of the SINTRAN III monitor calls from the NODAL level. In particular the most important RT monitor calls have been implemented in this way, a property which renders possible the use of NODAL as a RT program administrator. (JIW)

  8. Solvent effects on extraction of aluminum(III), gallium(III), and indium(III), with decanoic acid

    International Nuclear Information System (INIS)

    Yamada, Hiromichi; Hayashi, Hisao; Fujii, Yukio; Mizuta, Masateru

    1986-01-01

    Extraction of aluminum(III) and indium(III) with decanoic acid in 1-octanol was carried out at 25 deg C and at an aqueous ionic strength of 0.1 mol dm -3 (NaClO 4 ). Monomeric and tetrameric aluminum(III) decanoates and monomeric indium(III) decanoate are responsible for the extraction. From a comparison of the present results with those obtained from the previous works, the polymerization of the extracted species was found to be more extensive in benzene than in 1-octanol, and the metal decanoates were highly polymerized in the following order in both solvents: Al > Ga > In. (author)

  9. Petroleum industry of Korea seen from industry

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.P. [SK Co, Seoul (Korea, Republic of)

    1998-05-01

    The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

  10. Separation studies of La(III) and Ce(III)/Nd(III)/Pr(III)/Sm(III) from chloride solution using DEHPA/PC88A in petrofin

    International Nuclear Information System (INIS)

    Acharya, Sagarika; Mishra, Sujata; Bhatta, B.C.

    2017-01-01

    The separation of La(III) and four other lanthanides. Ce, Nd, Pr and Sm from chloride solution has been studied using the two acidic organophosphorous extractants, DEHPA and PC88A in petrofin at pH 4.3. The metal content analysis was done using an ICP-OES spectrophotometer. The separation factors (β) was calculated and for La-Sm pair highest value of 9.7 was obtained. (author)

  11. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    International Nuclear Information System (INIS)

    Mishra, A.; Singh, M.P.; Singh, V.K.

    1982-01-01

    The nitrato-complexes, [Y(PyBzH) 2 (NO 3 ) 2 ]NO 3 .H 2 O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole] are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm -1 cm 2 mol -1 ) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the terpositive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C 2 v) and uncoordinated (D 3 h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms. (author)

  12. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, M P; Singh, V K

    1982-05-01

    The nitrato-complexes, (Y(PyBzH)/sub 2/(NO/sub 3/)/sub 2/)NO/sub 3/.H/sub 2/O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole) are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm/sup -1/cm/sup 2/mol/sup -1/) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the positive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C/sub 2/v) and uncoordinated (D/sub 3/h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms.

  13. Tobacco industry influence on the definition of tobacco related disorders by the American Psychiatric Association

    OpenAIRE

    Neuman, M; Bitton, A; Glantz, S

    2005-01-01

    Objective: The Diagnostic and statistical manual of mental disorders, third edition (DSM-III), published by the American Psychiatric Association (APA) in 1980, included the first official definitions by the APA of tobacco dependence and tobacco withdrawal. Tobacco industry efforts to influence the DSM-III were investigated.

  14. DSM-III-R and religion.

    Science.gov (United States)

    Post, S G

    1992-07-01

    The interpretation of religion in DSM-III-R contains considerable negative bias and contributes to unfair stereotypes of religious persons. Particularly new religious movements and religious conversion are unfairly interpreted under the DSM-III-R heading, 'Dissociative Disorder Not Otherwise Specified'. It is suggested that a more balanced and respectful interpretation of religion is needed in DSM-III-R, since psychiatry through its official nomenclature should not contribute to social intolerance of religious nonconformity.

  15. Sorption of small amounts of europium(III) on iron(III) hydroxide and oxide

    International Nuclear Information System (INIS)

    Music, S.; Gessner, M.; Wolf, R.H.H.

    1979-01-01

    The sorption of small amounts of europium(III) on iron(III) hydroxide and oxide has been studied as a function of pH. The mechanism of sorption is discussed. Optimum conditions have been found for the preconcentration of small or trace amounts of europium(III) by iron(III) hydroxide and oxide. The influence of complexing agents (EDTA, oxalate, tartrate and 5-sulfosalicylic acid) on the sorption of small amounts of europium(III) on iron(III) oxide has also been studied. (author)

  16. Characterization of ribonuclease III from Brucella.

    Science.gov (United States)

    Wu, Chang-Xian; Xu, Xian-Jin; Zheng, Ke; Liu, Fang; Yang, Xu-Dong; Chen, Chuang-Fu; Chen, Huan-Chun; Liu, Zheng-Fei

    2016-04-01

    Bacterial ribonuclease III (RNase III) is a highly conserved endonuclease, which plays pivotal roles in RNA maturation and decay pathways by cleaving double-stranded structure of RNAs. Here we cloned rncS gene from the genomic DNA of Brucella melitensis, and analyzed the cleavage properties of RNase III from Brucella. We identified Brucella-encoding small RNA (sRNA) by high-throughput sequencing and northern blot, and found that sRNA of Brucella and Homo miRNA precursor (pre-miRNA) can be bound and cleaved by B.melitensis ribonuclease III (Bm-RNase III). Cleavage activity of Bm-RNase III is bivalent metal cations- and alkaline buffer-dependent. We constructed several point mutations in Bm-RNase III, whose cleavage activity indicated that the 133th Glutamic acid residue was required for catalytic activity. Western blot revealed that Bm-RNase III was differently expressed in Brucella virulence strain 027 and vaccine strain M5-90. Collectively, our data suggest that Brucella RNase III can efficiently bind and cleave stem-loop structure of small RNA, and might participate in regulation of virulence in Brucella. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Potentiometric studies on some ternary complexes of Nd(III), Sm(III), Gd(III) and Ho(III) with cyclohexanediaminetetraacetic acid as primary ligand

    International Nuclear Information System (INIS)

    Marathe, D.G.; Munshi, K.N.

    1983-01-01

    The formation constants of the ternary complexes of neodymium(III), samarium(III), gadlonium(III) and holmium(III) with cyclohexanediaminetetraacetic acid (CyDTA) as primary ligand and dihydroxynaphthalene (DHN), dihydroxynaphthalene-6-sulphonic acid (DHNSA) and cateechol-3,5-disulphonic acid (CDSA) as secondary ligands have been investigated by potentiometric titration technique. The secondary ligands have been investigated by potentiometric titration technique. The values of formation constants of 1:1:1 ternary chelates are reported at three different temperatures, and at a fixed ionic strength, μ = 0.1 M (NaClO 4 ). (author)

  18. Prospects of III-nitride optoelectronics grown on Si

    International Nuclear Information System (INIS)

    Zhu, D; Wallis, D J; Humphreys, C J

    2013-01-01

    The use of III-nitride-based light-emitting diodes (LEDs) is now widespread in applications such as indicator lamps, display panels, backlighting for liquid-crystal display TVs and computer screens, traffic lights, etc. To meet the huge market demand and lower the manufacturing cost, the LED industry is moving fast from 2 inch to 4 inch and recently to 6 inch wafer sizes. Although Al 2 O 3 (sapphire) and SiC remain the dominant substrate materials for the epitaxy of nitride LEDs, the use of large Si substrates attracts great interest because Si wafers are readily available in large diameters at low cost. In addition, such wafers are compatible with existing processing lines for 6 inch and larger wafers commonly used in the electronics industry. During the last decade, much exciting progress has been achieved in improving the performance of GaN-on-Si devices. In this contribution, the status and prospects of III-nitride optoelectronics grown on Si substrates are reviewed. The issues involved in the growth of GaN-based LED structures on Si and possible solutions are outlined, together with a brief introduction to some novel in situ and ex situ monitoring/characterization tools, which are especially useful for the growth of GaN-on-Si structures. (review article)

  19. Characterization of tannery sludge from the leather industry of Franca industrial district, SP, Brazil

    International Nuclear Information System (INIS)

    Chambi, M.M.; Toffoli, S.M.

    2011-01-01

    The industry of leather manufacture generates large quantities of solid leather waste with characteristics of high-polluting and hazardous conditions. Among these wastes, stands out the wet blue leather (chromed leather scraps), and the tanning sludge and secondary sludge generated in the processes of effluents treatment. These wastes contain Cr(III), which, under oxidizing conditions, can turn into Cr (VI), which is highly toxic. However, these wastes are a potential source of chromium oxide (traditional industrial pigment), which could be used by the glass and ceramic enamel industries. In this study, a preliminary characterization of a chromium sludge from the industrial district of Franca-SP was conducted. X-ray diffraction (XRD), chemical (XRF) and thermal (DTA / TG) analyses were used to determine the physical and chemical characteristics of this solid waste. The potential of using this material as an available and cheap pigment for the manufacture of enamels and glass is discussed. (author)

  20. Industrial initiatives in the wind industry

    International Nuclear Information System (INIS)

    Edworthy, J.

    1992-01-01

    Industrial initiatives are methods of lobbying and marketing to increase the activity, revenues, profits, and commercial viability of an industry. They may be undertaken by industry individuals or firms, industry groups, government agencies, or combinations of all these. In Canada, one example of an industrial initiative is the Canadian Wind Energy Association. Other initiatives relevant to the wind power industry include Technology Inflow Programs sponsored by External Affairs Canada, used for visiting foreign firms with the view to licensing foreign technology, and Industrial Research Assistance Programs to develop or adapt new technologies in partnership with government. The Conservation/Renewable Energy Council, Small Power Producers of Alberta, and Independent Power Producers Society of Ontario are also active in supporting wind energy initiatives. In other countries, notable initiatives for wind energy include the Danish wind turbine warranty guarantee program. The Western Wind Industry Network of Canada conducts regional lobbying. It is suggested that in Canada, more such networks are needed, as well as joint ventures with utilities and governments, and more work with the regulatory agencies, to promote wind energy

  1. Industrial zones and Arab industrialization in Israel

    NARCIS (Netherlands)

    Sofer, Michael; Schnell, Izhak; Drori, Israel

    1996-01-01

    Since the 1970s there has been increased integration of the Arab sector into the Israeli economy. This integration has been characterized by the increase in industrial entrepreneurship in the Arab settlements. Critical to the industrialization process are factors related to the availability of

  2. Dutch industry, smart(est) industry

    NARCIS (Netherlands)

    Sol, E.J.; Steinbuch, M.; Keulen, F. van; Houten, F.J.A.M.; Horst, T.J.J. van der

    2015-01-01

    Digitalisering verandert onze samenleving. De combinatie van opkomende technologieën, zoals het Internet, micro-sensoren, 3D-printing en big data maakt volledig nieuwe producten en diensten mogelijk. In de industrie wordt niet voor niets gesproken over een vierde industriële revolutie. Het is voor

  3. The Moessbauer effect in Fe(III) HEDTA, Fe(III) EDTA, and Fe(III) CDTA compounds

    International Nuclear Information System (INIS)

    Prado, F.R.

    1989-01-01

    The dependence of Moessbauer spectra with pH value of Fe(III)HEDTA and Fe(III)CDTA compounds is studied. Informations on formation processes of LFe-O-FeL (L=ligand) type dimers by the relation of titration curves of Fe(III)EDTA, Fe(III)HEDTA and Fe(III)CDTA compounds with the series of Moessbauer spectra, are obtained. Some informations on Fe-O-Fe bond structure are also obtained. Comparing the titration curves with the series of Moessbauer spectra, it is concluded that the dimerization process begins when a specie of the form FeXOH α (X = EDTA, HEDTA, CDTA; α = -1, -2) arises. (M.C.K.) [pt

  4. Extraction and stripping of neodymium (III) and dysprosium (III) by TRUEX solvent

    International Nuclear Information System (INIS)

    Rout, Alok; Venkatesan, K.A.; Antony, M.P.; Srinivasan, T.G.; Vasudeva Rao, P.R.

    2009-01-01

    McCabe-Thiele diagram for the extraction and stripping of Nd (III) and Dy (III) by TRUEX solvent has been constructed to determine the number of stages required for complete extraction and stripping. (author)

  5. Standards in neurosonology. Part III

    Directory of Open Access Journals (Sweden)

    Joanna Wojczal

    2016-06-01

    Full Text Available The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler. Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity.

  6. Modal Profiles for the WISC-III.

    Science.gov (United States)

    Pritchard, David A.; Livingston, Ronald B.; Reynolds, Cecil R.; Moses, James A., Jr.

    2000-01-01

    Presents a normative typology for classifying the Wechsler Intelligence Scale for Children-Third Edition (WISC-III) factor index profiles according to profile shape. Current analyses indicate that overall profile level accounted for a majority of the variance in WISC-III index scores, but a considerable proportion of the variance was because of…

  7. The OPAL phase III microvertex detector

    International Nuclear Information System (INIS)

    De Jong, S.

    1997-01-01

    A description of the OPAL Phase III microvertex detector is given. Special emphasis is put on problems that have been encountered in the installation and operation of the different phases of the OPAL microvertex detector leading to the present Phase III detector and their cures. A short description of the new OPAL radiation monitoring and beam dump system is also given. (orig.)

  8. National Coastal Condition Report III Factsheet

    Science.gov (United States)

    The National Coastal Condition Report III (NCCR III) is the third in a series of environmental assessments of U.S. coastal waters and the Great Lakes. The report includes assessments of the nation’s estuaries in the contiguous 48 states and Puerto Rico.

  9. National Coastal Condition Report III (2008)

    Science.gov (United States)

    The National Coastal Condition Report III (NCCR III) is the third in a series of environmental assessments of U.S. coastal waters and the Great Lakes. The report includes assessments of the nation’s estuaries in the contiguous 48 states and Puerto Rico.

  10. Oral Assessment Kit, Levels II & III. Draft.

    Science.gov (United States)

    Agrelo-Gonzalez, Maria; And Others

    The assessment packet includes a series of oral tests to help develop speaking as an integral part of second language instruction at levels II and III. It contains: 8 mini-tests for use at level II; 9 mini-tests for use at level III; a rating scale and score sheet masters for evaluating performance on these tests; and a collection of suggested…

  11. The Industry That Can.

    Science.gov (United States)

    Aguirre, Edward

    This speech by the U.S. Commissioner of Education reviews the education industry and education-industry relations. Examples illustrate the effective partnership that can be created to fashion and achieve successful vocational and career education programs. (MML)

  12. An Industrial Physics Toolkit

    Science.gov (United States)

    Cummings, Bill

    2004-03-01

    Physicists possess many skills highly valued in industrial companies. However, with the exception of a decreasing number of positions in long range research at large companies, job openings in industry rarely say "Physicist Required." One key to a successful industrial career is to know what subset of your physics skills is most highly valued by a given industry and to continue to build these skills while working. This combination of skills from both academic and industrial experience becomes your "Industrial Physics Toolkit" and is a transferable resource when you change positions or companies. This presentation will describe how one builds and sells your own "Industrial Physics Toolkit" using concrete examples from the speaker's industrial experience.

  13. Electronics Industry Study Report

    National Research Council Canada - National Science Library

    Belt, David; Fellows, John R; Kameru, Philip; Nazaroff, Boris-Frank A; Pauroso, Anthony; Schulz, Frederick; Ballew, Bob; Bond, Thomas; Demers, Stephy; Kirkpatrick, Steve

    2005-01-01

    This paper provides a national strategy for the US electronics industry. Electronics is one of the largest industries in the US and plays a critical role in almost every aspect of national security...

  14. Localisation for industrial development

    CSIR Research Space (South Africa)

    Bhugwandin, Ashley

    2017-10-01

    Full Text Available This presentation focuses on localisation for industrial development, and is presented by Ashley Bhugwandin at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

  15. Antithrombin III for critically ill patients

    DEFF Research Database (Denmark)

    Allingstrup, Mikkel; Wetterslev, Jørn; Ravn, Frederikke B

    2016-01-01

    Background: Critical illness is associated with uncontrolled inflammation and vascular damage which can result in multiple organ failure and death. Antithrombin III (AT III) is an anticoagulant with anti-inflammatory properties but the efficacy and any harmful effects of AT III supplementation...... in critically ill patients are unknown. This review was published in 2008 and updated in 2015.  Objectives: To examine: 1. The effect of AT III on mortality in critically ill participants. 2. The benefits and harms of AT III. We investigated complications specific and not specific to the trial intervention......, bleeding events, the effect on sepsis and disseminated intravascular coagulation (DIC) and the length of stay in the intensive care unit (ICU) and in hospital in general.  Search methods: We searched the following databases from inception to 27 August 2015: Cochrane Central Register of Controlled Trials...

  16. 29 CFR 520.401 - Are there any industries, occupations, etc. that do not qualify for a certificate to employ...

    Science.gov (United States)

    2010-07-01

    ... subpart C of this part): (1) In the apparel industry: (i) Rainwear (ii) Leather and sheep-lined clothing (iii) Women's apparel division of the apparel industry for the manufacture of women's misses', and... 29 Labor 3 2010-07-01 2010-07-01 false Are there any industries, occupations, etc. that do not...

  17. Light-induced reduction of rhodium(III) and palladium(II) on titanium dioxide dispersions and the selective photochemical separation and recovery of gold(III), platinum(IV), and rhodium(III) in chloride media

    Energy Technology Data Exchange (ETDEWEB)

    Borgarello, E.; Serpone, N.; Emo, G.; Harris, R.; Pelizzetti, E.; Minero, C.

    1986-12-03

    Irradiation of aqueous TiO/sub 2/ dispersions containing palladium(II) or rhodium(III) chloride salts with AM1 simulated sunlight leads to the photoreduction of these metals, which are deposited on the semiconductor particle surface. Oxygen is detrimental to the photoreduction of rhodium(III) but not the photoreduction of palladium(II). However, in both cases the reduction process is most efficient if the solution contains CH/sub 3/OH, which acts to scavenge valence band holes of the illuminated TiO/sub 2/ semiconductor. The selective photoreduction and recovery of precious metals from a dilute solution (as might be found in industrial wastes) have been investigated for a mixture of gold(III), platinum(IV), and rhodium(III) chloride salts as a function of various parameters (pH, presence or absence of O/sub 2/, presence or absence of a hole scavenger, and the concentration of the semiconductor). At pH 0, gold is easily separated from platinum and rhodium. The rate of photoreduction of gold(III) on TiO/sub 2/ is nearly independent of the concentration of the semiconductor, under the experimental conditions employed; the limiting rate is 2.7 x 10/sup -7/ M s/sup -1/. The potential utility of this selective photochemical technique is discussed.

  18. Thermodynamic model for solution behavior and solid-liquid equilibrium in Na-Al(III-Fe(III-Cr(III-Cl-H2O system at 25°C

    Directory of Open Access Journals (Sweden)

    André Laurent

    2018-03-01

    Full Text Available The knowledge of the thermodynamic behavior of multicomponent aqueous electrolyte systems is of main interest in geo-, and environmental-sciences. The main objective of this study is the development of a high accuracy thermodynamic model for solution behavior, and highly soluble M(IIICl3(s (M= Al, Fe, Cr minerals solubility in Na-Al(III-Cr(III-Fe(III-Cl-H2O system at 25°C. Comprehensive thermodynamic models that accurately predict aluminium, chromium and iron aqueous chemistry and M(III mineral solubilities as a function of pH, solution composition and concentration are critical for understanding many important geochemical and environmental processes involving these metals (e.g., mineral dissolution/alteration, rock formation, changes in rock permeability and fluid flow, soil formation, mass transport, toxic M(III remediation. Such a model would also have many industrial applications (e.g., aluminium, chromium and iron production, and their corrosion, solve scaling problems in geothermal energy and oil production. Comparisons of solubility and activity calculations with the experimental data in binary and ternary systems indicate that model predictions are within the uncertainty of the data. Limitations of the model due to data insufficiencies are discussed. The solubility modeling approach, implemented to the Pitzer specific interaction equations is employed. The resulting parameterization was developed for the geochemical Pitzer formalism based PHREEQC database.

  19. Conditions for industrial production

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

    1996-01-01

    The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

  20. Industry recession to persist

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the depressed U.S. oil and gas industry is not likely to recover soon, witnesses told the Texas Railroad Commission's state of the petroleum industry hearing. Major companies and independent operators agreed the U.S. petroleum industry is near a state of collapse. Many the producers are despairing about the chances of surviving the latest economic downturn

  1. FOSSIL FUEL INDUSTRIES

    Science.gov (United States)

    The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

  2. Benchmarking and industry performance

    NARCIS (Netherlands)

    Ten Raa, T.

    2011-01-01

    In this paper I interrelate productivity analysis and the theory of industrial organization. A proposition proves that an industrial organization is efficient if and only if it is supportable in the entry-proofness sense. Industrial performance is decomposed in efficiency and technical change terms

  3. Robotics and Industrial Arts.

    Science.gov (United States)

    Edmison, Glenn A.; And Others

    Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

  4. Spring 2008 Industry Study: Financial Services Industry

    National Research Council Canada - National Science Library

    Calderon, Juan; Collins, Thomas W; Devinney, Edward; Driggers, Gene J; Dunmyer, Valrica; Flood, Paul; Gallant, Robin; Kekauoha, Stanford K; Krawietz, Anthony B; Kumashiro, Patrick T; LaDue, Paul W; LaFalce, John; Larson, Steven W; Lawrence, Steven J; Nettleton, John; Ostrowski, John A

    2008-01-01

    The extensive media coverage of the 2008 subprime crisis, both domestically and abroad, drives home the crucial role that the financial services industry plays for not only individual Americans, but for U.S. national security...

  5. INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

    OpenAIRE

    Ahmad Kamil

    2015-01-01

    In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration...

  6. Uranium (III)-Plutonium (III) co-precipitation in molten chloride

    Science.gov (United States)

    Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

    2018-02-01

    Co-management of the actinides in an integrated closed fuel cycle by a pyrochemical process is studied at the laboratory scale in France in the CEA-ATALANTE facility. In this context the co-precipitation of U(III) and Pu(III) by wet argon sparging in LiCl-CaCl2 (30-70 mol%) molten salt at 705 °C is studied. Pu(III) is prepared in situ in the molten salt by carbochlorination of PuO2 and U(III) is then introduced as UCl3 after chlorine purge by argon to avoid any oxidation of uranium up to U(VI) by Cl2. The oxide conversion yield through wet argon sparging is quantitative. However, the preferential oxidation of U(III) in comparison to Pu(III) is responsible for a successive conversion of the two actinides, giving a mixture of UO2 and PuO2 oxides. Surprisingly, the conversion of sole Pu(III) in the same conditions leads to a mixture of PuO2 and PuOCl, characteristic of a partial oxidation of Pu(III) to Pu(IV). This is in contrast with coconversion of U(III)-Pu(III) mixtures but in agreement with the conversion of Ce(III).

  7. Minerals industry survey, 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

  8. Minerals industry survey 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

  9. Historicism and Industry Emergence

    DEFF Research Database (Denmark)

    Kirsch, David; Moeen, Mahka; Wadhwani, Dan

    2014-01-01

    Management and organization scholars have increasingly turned to historical sources to examine the emergence and evolution of industries over time. This scholarship has typically used historical evidence as observations for testing theoretically relevant processes of industry emergence....... In this chapter, an alternative approach is explored that focuses on reconstructing causes and processes that time and theory have erased. The emergence of three industries—plant biotechnology, savings banking, and the automobile—shows how time, along with prevailing functional models of industry evolution, leads...... excluded phenomena and explanations, reconstructing uncertainty and alternative paths of industry emergence, and studying the processes of information elision and exclusion in the formation of industry knowledge....

  10. Industrial statistics with Minitab

    CERN Document Server

    Cintas, Pere Grima; Llabres, Xavier Tort-Martorell

    2012-01-01

    Industrial Statistics with MINITAB demonstrates the use of MINITAB as a tool for performing statistical analysis in an industrial context. This book covers introductory industrial statistics, exploring the most commonly used techniques alongside those that serve to give an overview of more complex issues. A plethora of examples in MINITAB are featured along with case studies for each of the statistical techniques presented. Industrial Statistics with MINITAB: Provides comprehensive coverage of user-friendly practical guidance to the essential statistical methods applied in industry.Explores

  11. Advanced Industrial Materials Program

    Science.gov (United States)

    Stooksbury, F.

    1994-06-01

    The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

  12. Association of Eu(III) and Cm(III) with Bacillus subtilis and Halobacterium salinarum

    International Nuclear Information System (INIS)

    Ozaki, Takuo; Kimura, Takaumi; Ohnuki, Toshihiko; Yoshida, Zenko

    2002-01-01

    Adsorption behavior of Eu(III) and Cm(III) by Bacillus subtilis and Halobacterium salinarum was investigated. Both microorganisms showed almost identical pH dependence on the distribution ratio (K d ) of the metals examined, i.e., K d of Eu(III) and Cm(III) increased with an increase of pH. The coordination state of Eu(III) adsorbed on the microorganisms was studied by time-resolved laser-induced fluorescence spectroscopy (TRLFS). The coordination states of Eu(III) adsorbed on the B. subtilis and H. salinarum was of different characteristics. H. salinarum exhibited more outer-spherical interaction with Eu(III) than B. subtilis. (author)

  13. Fluorimetric determination of samarium(III) and europium(III) in neodymium oxide by separation with a resin column

    Energy Technology Data Exchange (ETDEWEB)

    Shaorong Liu; Jian Meng (Beijing Research Institute of Chemical Engineering and Metallurgy (China)); Wenhua Liu (General Research Institute for Non-Ferrous Metals (China))

    1992-08-24

    When thenoyltrifluoroacetone-phenanthroline-Triton X-100 is used to determine samarium(III) and europium(III) fluorimetrically, only a limited amount of neodymium(III) can be tolerated. By using an on- line separation which can partially separate neodymium(III) from samarium(III), a practical and convenient method was developed to detect samarium(III) at concentrations >0.05% and europium(III) at concentrations >0.005% in neodymium oxide. (author). 7 refs.; 4 figs.; 3 tabs.

  14. Fluorimetric determination of samarium(III) and europium(III) in neodymium oxide by separation with a resin column

    International Nuclear Information System (INIS)

    Shaorong Liu; Jian Meng; Wenhua Liu

    1992-01-01

    When thenoyltrifluoroacetone-phenanthroline-Triton X-100 is used to determine samarium(III) and europium(III) fluorimetrically, only a limited amount of neodymium(III) can be tolerated. By using an on- line separation which can partially separate neodymium(III) from samarium(III), a practical and convenient method was developed to detect samarium(III) at concentrations >0.05% and europium(III) at concentrations >0.005% in neodymium oxide. (author). 7 refs.; 4 figs.; 3 tabs

  15. Timely management of developing class III malocclusion

    Directory of Open Access Journals (Sweden)

    M R Yelampalli

    2012-01-01

    Full Text Available Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports.

  16. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  17. Thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments

    Energy Technology Data Exchange (ETDEWEB)

    Rai, Dhanpat; Rao, Linfeng; Weger, H.T.; Felmy, A.R. [Pacific Northwest National Laboratory, WA (United States); Choppin, G.R. [Florida State University, Florida (United States); Yui, Mikazu [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan)

    1999-01-01

    This report provides thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments, and contributes to an integration of the JNC chemical thermodynamic database, JNC-TDB (previously PNC-TDB), for the performance analysis of geological isolation system for high-level radioactive wastes. Thermodynamic data for the formation of complexes or compounds with hydroxide, chloride, fluoride, carbonate, nitrate, sulfate and phosphate are discussed in this report. Where data for specific actinide(III) species are lacking, the data were selected based on chemical analogy to other trivalent actinides. In this study, the Pitzer ion-interaction model is mainly used to extrapolate thermodynamic constants to zero ionic strength at 25degC. (author)

  18. Finnish industry's energy requirement

    International Nuclear Information System (INIS)

    Punnonen, J.

    2000-01-01

    Industry uses around half of the electricity consumed in Finland. In 1999, this amounted to 42.3 TWh and 420 PJ of fuel. Despite the continual improvements that have been made in energy efficiency, energy needs look set to continue growing at nearly 2% a year. Finnish industrial output rose by some 5.5% in 1999. In energy-intensive sectors such as pulp and paper, output rose by 3.4%, in the metal industry by 4%, and in the chemical industry by 3.1%. Growth across Finnish industry is largely focused on the electrical and electronics industries, however, where growth last year was 24.3% The Finnish forest products industry used a total of 26.1 TWh of electricity last year, up 1% on 1998. This small increase was the result of the industry's lower-than-average operating rate in the early part of the year The metal industry used 7.2 TWh of electricity, an increase of 5.8% on 1998. Usage in the chemical industry rose by 2% to 5.2 TWh. Usage by the rest of industry totalled 3.8 TWh, up 2.3% on 1998. All in all, industry's use of electricity rose by 2% in 1999 to 42,3 TWh. Increased demand on industry's main markets in Europe will serve to boost industrial output and export growth this year. This increased demand will be particularly felt in energy-intensive industries in the shape of an increased demand for electricity. Overall, electricity demand is expected to grow by 3% this year, 1% more than industry's longterm projected electricity usage growth figure of 2%. The structure of industry's fuel use in Finland has changed significantly over the last 25 years. Oil, for example, now accounts for only some 10% of fuel use compared to the 40% typical around the time of the first oil crisis. Oil has been replaced by biofuels, peat, and natural gas. The pulp and paper industry is the largest industrial user of renewable energy sources in Finland, and uses wood-related fuels to cover nearly 70% of its fuel needs

  19. III-V semiconductor materials and devices

    CERN Document Server

    Malik, R J

    1989-01-01

    The main emphasis of this volume is on III-V semiconductor epitaxial and bulk crystal growth techniques. Chapters are also included on material characterization and ion implantation. In order to put these growth techniques into perspective a thorough review of the physics and technology of III-V devices is presented. This is the first book of its kind to discuss the theory of the various crystal growth techniques in relation to their advantages and limitations for use in III-V semiconductor devices.

  20. MANUAL: BEST MANAGEMENT PRACTICES FOR POLLUTION PREVENTION IN THE SLABSTOCK AND MOLDED FLEXIBLE POLYURETHANE FOAM INDUSTRY

    Science.gov (United States)

    The 1990 Clean Air Act Amendments require EPA to develop standards for major emission sources of 189 hazardous air pollutants (HAPs). EPA has identified the flexible polyurethane foam industry as a large emitter of HAPs and has slated the industry for regulation under Title III, ...

  1. Russian refining - an industry in transition

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, E [CentreInvest, Moscow (Russian Federation)

    1999-02-01

    In the old Soviet Union (now called the CIS), the refining industry is undergoing much modernisation, although the process is far from complete. Eventually, the CIS is expected to have a market-responsive competitive refining business. The expected transformation is discussed according to a five-stage plan. The stages are (i) the change from horizontally integrated entity to vertically integrated global concerns, (ii) the change from over-manned dinosaurs to modern efficient businesses, (iii) the move towards smaller, more advanced market-orientated processes, (iv) improving the transport and storage infrastructures and (v) improving accountability and profitability. The predictions for 2005 onwards are for sustained profitability. (UK)

  2. Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

    International Nuclear Information System (INIS)

    Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z.; Gillow, J.B.; Francis, A.J.

    2004-01-01

    We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K d ) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N H 2 O ) and the degree of strength of ligand field (R E/M ) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K d of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K d , indicating that an exchange with Na + on the functional groups was involved in their sorption. The ΔN H 2 O (= 9 - N H 2 O ) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R E/M for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

  3. Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

    Energy Technology Data Exchange (ETDEWEB)

    Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z. [Advanced Science Research Center, Japan Atomic Energy Research Inst., Ibaraki (Japan); Gillow, J.B.; Francis, A.J. [Environmental Sciences Dept., Brookhaven National Lab., Upton, NY (United States)

    2004-07-01

    We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K{sub d}) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N{sub H{sub 2}O}) and the degree of strength of ligand field (R{sub E/M}) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K{sub d} of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K{sub d}, indicating that an exchange with Na{sup +} on the functional groups was involved in their sorption. The {delta}N{sub H{sub 2}O} (= 9 - N{sub H{sub 2}O}) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R{sub E/M} for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

  4. Landscape of Industry: Transformation of (Eco Industrial Park through history

    Directory of Open Access Journals (Sweden)

    Archana Sharma

    2013-11-01

    Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

  5. III Advanced Ceramics and Applications Conference

    CERN Document Server

    Gadow, Rainer; Mitic, Vojislav; Obradovic, Nina

    2016-01-01

    This is the Proceedings of III Advanced Ceramics and Applications conference, held in Belgrade, Serbia in 2014. It contains 25 papers on various subjects regarding preparation, characterization and application of advanced ceramic materials.

  6. Workshop III – Cosmology: Observations versus theories

    Indian Academy of Sciences (India)

    599–601. Workshop III – Cosmology: Observations versus theories. T R SESHADRI ... The gravitational lens image separation distribution function in the presence of evolving models of ... Restoration of local electroweak symmetry is achieved.

  7. First results from Mark III at SPEAR

    International Nuclear Information System (INIS)

    Einsweiler, K.F.

    The paper presents data on meson decays obtained using the MARK III detector operating at SPEAR. Results on hadronic decays; decays of the etasub(e); and results on radiative decays; are all described. (U.K.)

  8. Damping of type III solar radio bursts

    International Nuclear Information System (INIS)

    Levin, B.N.

    1982-01-01

    The meter- and decameter-wavelength damping of type III bursts may be attributable to stabilization of the Langmuir-wave instability of the fast-electron streams through excitation of cyclotron-branch plasma waves

  9. Study of Type III ELMs in JET

    Energy Technology Data Exchange (ETDEWEB)

    Sartori, R [EFDA Close Support Unit, Garching, 2 Boltzmannstrasse, Garching (Germany); Saibene, G [EFDA Close Support Unit, Garching, 2 Boltzmannstrasse, Garching (Germany); Horton, L D [Association Euratom-IPP, MPI fuer Plasmaphysik, 2 Boltzmannstrasse, Garching (Germany); Becoulet, M [Association Euratom-CEA, CE Cadarache, F-13108 St Paul-lez-Durance, CEDEX (France); Budny, R [PPPL, Princeton University, PO Box 451, Princeton, NJ 08543 (United States); Borba, D [Associacao EURATOM/IST, Centro de Fusao Nuclear, 1096 Lisbon, CODEX (Portugal); Chankin, A [Association Euratom-IPP, MPI fuer Plasmaphysik, 2 Boltzmannstrasse, Garching (Germany); Conway, G D [Association Euratom-IPP, MPI fuer Plasmaphysik, 2 Boltzmannstrasse, Garching (Germany); Cordey, G [EURATOM-UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); McDonald, D [EURATOM-UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Guenther, K [EURATOM-UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Hellermann, M G von [FOM-Rijnhuizen, Ass. Euratom-FOM, TEC, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Igithkanov, Yu [Max-Planck-Institute for Plasma Physics, Teilinstitut Greifswald, EURATOM Ass., D-17491, Greifswald (Germany); Loarte, A [EFDA Close Support Unit, Garching, 2 Boltzmannstrasse, Garching (Germany); Lomas, P J [EURATOM-UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Pogutse, O [EURATOM-UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Rapp, J [EFDA Close Support Unit, Culham, Abingdon OX14 3DB (United Kingdom)

    2004-05-01

    This paper presents the results of JET experiments aimed at studying the operational space of plasmas with a Type III ELMy edge, in terms of both local and global plasma parameters. In JET, the Type III ELMy regime has a wide operational space in the pedestal n{sub e} - T{sub e} diagram, and Type III ELMs are observed in standard ELMy H-modes as well as in plasmas with an internal transport barrier (ITB). The transition from an H-mode with Type III ELMs to a steady state Type I ELMy H-mode requires a minimum loss power, P{sub TypeI}. P{sub TypeI} decreases with increasing plasma triangularity. In the pedestal n{sub e} - T{sub e} diagram, the critical pedestal temperature for the transition to Type I ELMs is found to be inversely proportional to the pedestal density (T{sub crit} {proportional_to} 1/n) at a low density. In contrast, at a high density, T{sub crit}, does not depend strongly on density. In the density range where T{sub crit} {proportional_to} 1/n, the critical power required for the transition to Type I ELMs decreases with increasing density. Experimental results are presented suggesting a common mechanism for Type III ELMs at low and high collisionality. A single model for the critical temperature for the transition from Type III to Type I ELMs, based on the resistive interchange instability with magnetic flutter, fits well the density and toroidal field dependence of the JET experimental data. On the other hand, this model fails to describe the variation of the Type III n{sub e} - T{sub e} operational space with isotopic mass and q{sub 95}. Other results are instead suggestive of a different physics for Type III ELMs. At low collisionality, plasma current ramp experiments indicate a role of the edge current in determining the transition from Type III to Type I ELMs, while at high collisionality, a model based on resistive ballooning instability well reproduces, in term of a critical density, the experimentally observed q{sub 95} dependence of the

  10. Magnetic interactions in iron (III) porphyrin chlorides

    International Nuclear Information System (INIS)

    Ernst, J.; Subramanian, Japyesan; Fuhrhop, J.H.

    1977-01-01

    Intermolecular exchange interactions in iron(III) porphyrin chlorides (porphyrin = OEP, proto, TPP) have been studied by X-ray structure, EPR and magnetic susceptibility studies. The crystal structure of Fe(III)OEP-Cl was found to be different from that of the other two. Different types of exchange broadened EPR-spectra are obtained which are attributable to the arrangement in the crystals. The EPR results correlate well with magnetic susceptibility data. (orig.) [de

  11. IIIST1\\NTI-i\\III.

    African Journals Online (AJOL)

    guests in September 1914. (1) Major-General Sir Lothian Nicholson. KCB, CMG, and Major H 1. MacMullen, MC, History of the East Lancashire Regiment in the Great. War 1914-1918, Littlebury. Bros, Ltd. Liverpool,. 1936. p 114. Ti\\.~TI(~S-1\\ IIIST ••III. ~SI Til VI~V. I..•f :01 i\\. f~•• 10III.SOIl ~IIII~ 1~lt. The study of military tactics ...

  12. Introduction of Basel III: Opportunities and Challenges

    OpenAIRE

    Madzova, Violeta

    2011-01-01

    Basel III is an opportunity as well as a challenge for the banks. It was developed from the existing Basel II framework, and the most signifi cant differences for banks are the introduction of liquidity and leverage ratios, and enhanced minimum capital requirements. An effective implementation of Basel III need to demonstrate to regulators, customers, and shareholders that the bank are recovering well from the global banking crisis of 2008 and provide a solid foundation for the next dev...

  13. NCEP ATP III dan Framingham score

    OpenAIRE

    Hasan, Refli; Fahila, Reny

    2016-01-01

    Laporan ini merupakan Program Pendidikan Kolesterol National yang diperbaharui yaitu pedoman klinis untuk melakukan pengujian kolesterol dan manajemen. ATP III dibuat berdasarkan bukti dan laporan ekstensif yang akan menjadi referensi dan rekomendasi ilmiah. Laporan ATP III dapat dijadikan pedoman untuk pemberian terapi penurun kolesterol yang intensif dalam praktek. Pedoman ini hanya sebagai informasi , tidak dapat mempengaruhi secara mutlak dalam penilaian klinis dokter yang akhirnya menent...

  14. CRONICA: FIESTA FUNERAL: LUMBALÚ PARA BATA III

    Directory of Open Access Journals (Sweden)

    Enrique Luis Muñoz Vélez

    2005-08-01

    Full Text Available El trabajo se inspira en las conversaciones con Paulino Salgado Valdez. Entrevistas con Batata III en Bogotá, 1998 y en Cartagena en el 2000 en el marco del Encuentro de los países andinos. Batata III nace el 29 de mayo de 1927 en el Palenque de San Basilio en el departamento de Bolívar, muere en Bogotá el viernes 23 de enero del 2004.

  15. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  16. Radiation Safety in Industrial Radiography. Specific Safety Guide

    International Nuclear Information System (INIS)

    2011-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  17. Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in … shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  18. Radiation Safety in Industrial Radiography. Specific Safety Guide (Arabic Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  19. Industry and energy; Industrie et energie

    Energy Technology Data Exchange (ETDEWEB)

    Birules y Bertran, A.M. [Ministere des Sciences et de la Technologie (Spain); Folgado Blanco, J. [Secretariat d' Etat a l' Economie, a l' Energie et aux PME du Royaume d' Espagne (Spain)

    2002-07-01

    This document is the provisional version of the summary of the debates of the 2433. session of the European Union Council about various topics relative to the industry and the energy. The energy-related topics that have been debated concern: the government helps in coal industry, the internal electricity and gas market, the trans-European energy networks, the bio-fuels in transportation systems, the energy charter, the pluri-annual energy program, and the green book on the security of energy supplies. (J.S.)

  20. Industry Study, Environment Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

  1. Industry X.0 : Reimaging industrial development

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

  2. Industry X.0 : Reimaging industrial development.

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

  3. Guidebook on radioisotope tracers in industry

    International Nuclear Information System (INIS)

    1990-01-01

    The idea of using tracers (chemical, dyes, etc.) in the investigation of complex physical phenomena has always attracted the attention of scientists and engineers. When radioactive isotopes became available it was immediately recognized that they offered an almost ideal solution to tracer selection. This book is devoted to reviewing the present status of the tracer method as such and to its applications to those branches of industry which have derived large benefits from the use of this modern technology. The main objectives of the IAEA's Industrial Applications and Chemistry Section is to help Member States in introducing to their own industries the different isotope and radiation techniques which have become available as a result of developments in the nuclear sciences. This section proposed the preparation of this guidebook, putting together various radiotracer methods and the experience obtained so far in their industrial use. Chapters 2 to 4 cover the general concept of tracers, technology and safety aspects, as well as data evaluation and interpretation. In chapter 5, therefore, general applications are discussed. In chapter 6, specialists in selected fields discuss their experience in radiotracer applications in various types of industrial activity. Most case studies are illustrated by at least one detailed example of an experiment carried out at an industrial installation. Current trends in the development of radiotracer methods are discussed in chapter 7, from both a theoretical and a practical viewpoint. Some possible new RTT applications in the future are also discussed here. Sealed radioactive sources are used almost as often as radioisotope tracers in industrial measurements. Annex I gives a short review of these techniques. Readers who are interested in the basic principles of radioisotope production will find the necessary information in Annex II. Annexes III, V and VI provide a demonstration of fundamental relations and properties; useful

  4. Complexation of trivalent actinides and lanthanides with hydrophilic N-donor ligands for Am(III)/Cm(III) and An(III)/Ln(III) separation; Komplexierung von trivalenten Actiniden und Lanthaniden mit hydrophilen N-Donorliganden zur Am(III)/Cm(III)- bzw. An(III)/Ln(III)-Trennung

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Christoph

    2017-07-24

    The implementation of actinide recycling processes is considered in several countries, aiming at the reduction of long-term radiotoxicity and heat load of used nuclear fuel. This requires the separation of the actinides from the fission and corrosion products. The separation of the trivalent actinides (An(III)) Am(III) and Cm(III), however, is complicated by the presence of the chemically similar fission lanthanides (Ln(III)). Hydrophilic N-donor ligands are employed as An(III) or Am(III) selective complexing agents in solvent extraction to strip An(III) or Am(III) from an organic phase loaded with An(III) and Ln(III). Though they exhibit excellent selectivity, the complexation chemistry of these ligands and the complexes formed during solvent extraction are not sufficiently characterized. In the present thesis the complexation of An(III) and Ln(III) with hydrophilic N-donor ligands is studied by time resolved laser fluorescence spectroscopy (TRLFS), UV/Vis, vibronic sideband spectroscopy and solvent extraction. TRLFS studies on the complexation of Cm(III) and Eu(III) with the Am(III) selective complexing agent SO{sub 3}-Ph-BTBP (tetrasodium 3,3{sup '},3'',3{sup '''}-([2,2{sup '}-bipyridine]-6,6{sup '}-diylbis(1,2,4-triazine-3,5,6-triyl)) tetrabenzenesulfonate) revealed the formation of [M(SO{sub 3}-Ph-BTBP){sub n}]{sup (4n-3)-} complexes (M = Cm(III), Eu(III); n = 1, 2). The conditional stability constants were determined in different media yielding two orders of magnitude larger β{sub 2}-values for the Cm(III) complexes, independently from the applied medium. A strong impact of ionic strength on the stability and stoichiometry of the formed complexes was identified, resulting from the stabilization of the pentaanionic [M(SO{sub 3}-Ph-BTBP){sub 2}]{sup 5-} complex with increasing ionic strength. Thermodynamic studies of Cm(III)-SO{sub 3}-Ph-BTBP complexation showed that the proton concentration of the applied medium impacts

  5. Gender differences in Class III malocclusion.

    Science.gov (United States)

    Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

    2005-07-01

    This study evaluated gender differences in the cephalometric records of a large-scale cross-sectional sample of Caucasian subjects with Class III malocclusion at different developmental ages. The purpose also was to provide average age-related and sex-related data for craniofacial measures in untreated Class III subjects that are used as reference in the diagnostic appraisal of the patient with Class III disharmony. The sample examined consisted of 1094 pretreatment lateral cephalometric records (557 female subjects and 537 male subjects) of Caucasian Class III individuals. The age range for female subjects was between three years six months and 57 years seven months. The male subject group ranged from three years three months to 48 years five months. Twelve age groups were identified. Skeletal maturity at different age periods also was determined using the stage of cervical vertebral maturation. Gender differences for all cephalometric variables were analyzed using parametric statistics. The findings of the study indicated that Class III malocclusion is associated with a significant degree of sexual dimorphism in craniofacial parameters, especially from the age of 13 onward. Male subjects with Class III malocclusion present with significantly larger linear dimensions of the maxilla, mandible, and anterior facial heights when compared with female subjects during the circumpubertal and postpubertal periods.

  6. High mobility and high concentration Type-III heterojunction FET

    Science.gov (United States)

    Tsu, R.; Fiddy, M. A.; Her, T.

    2018-02-01

    The PN junction was introduced in transistors by doping, resulting in high losses due to Coulomb scattering from the dopants. The MOSFET introduced carriers in the form of electrons and holes with an applied bias to the oxide barrier, resulting in carrier transfer without doping. This avoids high scattering losses and dominates the IC industries. With heterojunctions having valence-band maxima near and even above the conduction-band minimum in the formation of Type-III superlattices, very useful devices, introduced by Tsu, Sai-Halacz, and Esaki, soon followed. If the layer thicknesses are more than the carrier mean-free-path, incoherent scattering results in the formation of carrier transfer via diffusion instead of opening up new energy gaps. The exploitation of carriers without scattering represents a new and significant opportunity in what we call a Broken Gap Heterojunction FET.

  7. BASEL III IMPACT ON ROMANIAN BANKING SYSTEM PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Mariana G. NEDELCU (BUNEA

    2014-04-01

    Full Text Available In the context of economic and financial crisis triggered in EU by autumn 2008, Romania's banking system like that in the other European countries, faced with the consequences of decreasing the standard of living the worsening of purchasing power (in terms of retail and with gaps and Delay occurred in the payment of corporate clients. However the deteriorating the quality of bank investments, increasing non-performing loans in bank portfolios totate ultimately causing the accumulation of excessive risks that banks were exposed. On the background of the crisis, the impact of Basel III is not only a financial regulation that is applicable to the banking industry and will fundamentally determine the profitability of the banking system. Through this study, we propose a series of measures applicable to the credit institutions to mitigate the impact of alignment with the new capital requirements.

  8. A minimal SATA III Host Controller based on FPGA

    Science.gov (United States)

    Liu, Hailiang

    2018-03-01

    SATA (Serial Advanced Technology Attachment) is an advanced serial bus which has a outstanding performance in transmitting high speed real-time data applied in Personal Computers, Financial Industry, astronautics and aeronautics, etc. In this express, a minimal SATA III Host Controller based on Xilinx Kintex 7 serial FPGA is designed and implemented. Compared to the state-of-art, registers utilization are reduced 25.3% and LUTs utilization are reduced 65.9%. According to the experimental results, the controller works precisely and steady with the reading bandwidth of up to 536 MB per second and the writing bandwidth of up to 512 MB per second, both of which are close to the maximum bandwidth of the SSD(Solid State Disk) device. The host controller is very suitable for high speed data transmission and mass data storage.

  9. OM Code Requirements For MOVs -- OMN-1 and Appendix III

    Energy Technology Data Exchange (ETDEWEB)

    Kevin G. DeWall

    2011-08-01

    The purpose or scope of the ASME OM Code is to establish the requirements for pre-service and in-service testing of nuclear power plant components to assess their operational readiness. For MOVs this includes those that perform a specific function in shutting down a reactor to the safe shutdown condition, maintaining the safe shutdown condition, and mitigating the consequences of an accident. This paper will present a brief history of industry and regulatory activities related to MOVs and the development of Code requirements to address weaknesses in earlier versions of the OM Code. The paper will discuss the MOV requirements contained in the 2009 version of ASME OM Code, specifically Mandatory Appendix III and OMN-1, Revision 1.

  10. The Aerodynamics of Heavy Vehicles III : Trucks, Buses and Trains

    CERN Document Server

    Orellano, Alexander

    2016-01-01

    This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future.   This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.  The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

  11. OM Code Requirements For MOVs -- OMN-1 and Appendix III

    International Nuclear Information System (INIS)

    DeWall, Kevin G.

    2011-01-01

    The purpose or scope of the ASME OM Code is to establish the requirements for pre-service and in-service testing of nuclear power plant components to assess their operational readiness. For MOVs this includes those that perform a specific function in shutting down a reactor to the safe shutdown condition, maintaining the safe shutdown condition, and mitigating the consequences of an accident. This paper will present a brief history of industry and regulatory activities related to MOVs and the development of Code requirements to address weaknesses in earlier versions of the OM Code. The paper will discuss the MOV requirements contained in the 2009 version of ASME OM Code, specifically Mandatory Appendix III and OMN-1, Revision 1.

  12. ACME-III and ACME-IV Final Campaign Reports

    Energy Technology Data Exchange (ETDEWEB)

    Biraud, S. C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-01-01

    The goals of the Atmospheric Radiation Measurement (ARM) Climate Research Facility’s third and fourth Airborne Carbon Measurements (ACME) field campaigns, ACME-III and ACME-IV, are: 1) to measure and model the exchange of CO2, water vapor, and other greenhouse gases by the natural, agricultural, and industrial ecosystems of the Southern Great Plains (SGP) region; 2) to develop quantitative approaches to relate these local fluxes to the concentration of greenhouse gases measured at the Central Facility tower and in the atmospheric column above the ARM SGP Central Facility, 3) to develop and test bottom-up measurement and modeling approaches to estimate regional scale carbon balances, and 4) to develop and test inverse modeling approaches to estimate regional scale carbon balance and anthropogenic sources over continental regions. Regular soundings of the atmosphere from near the surface into the mid-troposphere are essential for this research.

  13. Nuclear industry technology boomerang

    International Nuclear Information System (INIS)

    Scholler, R.W.

    1987-01-01

    The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

  14. VE of construction industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-10-15

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  15. Modern electrochemistry and industry

    International Nuclear Information System (INIS)

    Kim, Sun Yong

    1985-04-01

    This book is divided into fifteen chapters on modern electrochemistry and industry. The contents of this book are electrochemistry and industry, electrochemistry for electrolyte like ionic mobility quantity of activity of electrolyte, potential balance system like cell potential, concentration cell and membrane potential, electrochemical kinetics, electrochemistry for surfactant, electrochemistry for electrolysis test such as polarography, chronopotentiometry and Cyclic voltametry, electrolysis reactor NaOH electrolysis industry, H 2 O electrolysis, molten metal electrolysis, copper electrolysis, battery and electro-organic chemistry.

  16. VE of construction industry

    International Nuclear Information System (INIS)

    1987-10-01

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  17. Educating and training industrial ecologists for the 1990s.

    Science.gov (United States)

    Troxell, D E

    1992-02-01

    For industrial ecology to become a reality and flourish, many talents must be integrated into a single system. Basically, there are four types of technologists who must be brought together to create a system: (i) technical specialists-those that can take the state of knowledge to the state of the art and eventually to the state of practice; (ii) technical "generalists"-those that can integrate diverse technologies into a comprehensive solution; (iii) technical managers-those that can lead technical efforts to an optimal solution (these people must have management skills in their area); and (iv) program managers-those that can understand and merge the overall efforts of technology, business, schedule, and finance. The initial questions for industrial ecology in the 1990s are: Do these people presently exist in industry? What will be needed to bring new people (recent graduates) into the field of industrial ecology? For this decade, the people who will develop and lead the concept of industrial ecology are presently in industry. However, certainly few, if any, today understand the concept of industrial ecology as a system issue. Training will be needed for these practitioners of the 1990s so that the overall goal and the mechanism for achieving industrial ecology are understood. A three-tiered approach is presented to define the education/training needed, to conduct training on an industry basis, and then to initiate the training to be done within a corporation. The three tiers propose the use of universities, professional societies, and industry groups. Having universities participate in the training of the 1990s industrial ecologists will give universities insight to the development of industrial ecology, and access to industry needs so that curriculum can be initiated to educate the industrial ecologists of the future.

  18. Uranium industry annual, 1986

    International Nuclear Information System (INIS)

    1987-01-01

    Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

  19. Miscellaneous Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes miscellaneous industrial minerals operations in the United States. The data represent commodities covered by the Minerals Information Team...

  20. Industrial Economics in Scandinavia

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Møllgaard, Peter

    2004-01-01

    Based on diverse research methods, we trace and map industrial economics research in Denmark, Norway and Sweden in the periode of 1880 to 1908. After describing this research in terms of key contributors, we argue that industrial economics developed rather unevenly in the Scandinavian countries....... Danish research was mainly theoretical and strongly oriented towards the international context, whereas Norwegian research was largely industry analysis with a strong leaning towards managerial economics. Swedish research in industrial economics is very scant until the end of the 1960s.JEL Code: B1, B2...

  1. Process and petroleum industry

    International Nuclear Information System (INIS)

    1998-01-01

    In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

  2. Process and petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

  3. Standard Industry Fare Level

    Data.gov (United States)

    Department of Transportation — Standard Industry Fare Level was establish after airline deregulation to serve as the standard against which a statutory zone of operating expense reasonableness was...

  4. Forest industries energy research

    Energy Technology Data Exchange (ETDEWEB)

    Scott, G. C.

    1977-10-15

    Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

  5. Wastewater Industrial Contributors

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Industrial contributors to municipal wastewater treatment facilities in Iowa for the National Pollutant Discharge Elimination System (NPDES) program.

  6. Automotive Industry in Malaysia

    DEFF Research Database (Denmark)

    Wad, Peter; Govindaraju, V.G.R. Chandran

    2011-01-01

    ) limited participation in the global value chain. Although the Malaysian infant industry protection policy comprised many promising initiatives, the national and the overall domestic automobile industry ended up as a captive of the regionalised Japanese keiretsu system in automobile manufacturing. A new...... expanded in terms of sales, production, employment and local content, but failed in industrial upgrading and international competitiveness. The failures can be attributed to (a) lack of political promotion for high challenge-high support environment, (b) low technological and marketing capabilities and (c...... transformation is required to push the industry beyond its current performance through a more strategic productive coalition with multiple stakeholders including trade unions....

  7. Transportation Industry 2004

    National Research Council Canada - National Science Library

    Miller, Evan; Kathir, Nathan; Brogan, Dennis M

    2004-01-01

    .... Because the defense sector relies on commercial transportation for both peacetime activities and for power projection, senior military leaders must understand the global transportation industry...

  8. Mapping of wine industry

    OpenAIRE

    Віліна Пересадько; Надія Максименко; Катерина Біла

    2016-01-01

    Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very un...

  9. The High Energy Materials Science Beamline (HEMS) at PETRA III

    International Nuclear Information System (INIS)

    Schell, Norbert; King, Andrew; Beckmann, Felix; Ruhnau, Hans-Ulrich; Kirchhof, Rene; Kiehn, Ruediger; Mueller, Martin; Schreyer, Andreas

    2010-01-01

    The HEMS Beamline at the German high-brilliance synchrotron radiation storage ring PETRA III is fully tunable between 30 and 250 keV and optimized for sub-micrometer focusing. Approximately 70 % of the beamtime will be dedicated to Materials Research. Fundamental research will encompass metallurgy, physics and chemistry with first experiments planned for the investigation of the relationship between macroscopic and micro-structural properties of polycrystalline materials, grain-grain-interactions, and the development of smart materials or processes. For this purpose a 3D-microsctructure-mapper has been designed. Applied research for manufacturing process optimization will benefit from high flux in combination with ultra-fast detector systems allowing complex and highly dynamic in-situ studies of micro-structural transformations, e.g. during welding processes. The beamline infrastructure allows accommodation of large and heavy user provided equipment. Experiments targeting the industrial user community will be based on well established techniques with standardized evaluation, allowing full service measurements, e.g. for tomography and texture determination. The beamline consists of a five meter in-vacuum undulator, a general optics hutch, an in-house test facility and three independent experimental hutches working alternately, plus additional set-up and storage space for long-term experiments. HEMS is under commissioning as one of the first beamlines running at PETRA III.

  10. WISC-III e WAIS-III na avaliação da inteligência de cegos WISC-III/WAIS-III en ciegos WISC-III and WAIS-III in intellectual assessment of blind people

    Directory of Open Access Journals (Sweden)

    Elizabeth do Nascimento

    2007-12-01

    Full Text Available Diante da escassez de pesquisas nacionais e de testes psicológicos destinados a avaliar pessoas cegas, desenvolveu-se um estudo psicométrico com as escalas verbais dos testes WISC-III e WAIS-III. Após as adaptações de alguns estímulos e das instruções, os testes foram aplicados em crianças (N = 120 e adultos (N = 52 residentes em Belo Horizonte. Os resultados indicaram que as escalas verbais modificadas apresentam uma boa consistência interna (alfa> 0,80. Além disso, a investigação da validade fatorial identifica a presença clara de apenas um componente. Este componente explica 81% e 64% para o WISC-III e WAIS-III, respectivamente. Conclui-se que as adaptações a que se procedeu não afetaram a estrutura fatorial das escalas. Deste modo, os profissionais poderão utilizar as escalas modificadas para avaliar a inteligência de pessoas cegas.Frente a la escasez de investigaciones nacionales asi como la ausencia de tests psicológicos que evaluen personas ciegas, se ha desarrollado un estudio psicometrico com la escalas verbales del WISC-III y WAIS-III. Posteriormente a las adaptaciones de algunos estímulos y de las instrucciones, las escalas fueron aplicadas a una muestra de niños (n=120 y de adultos (n=52 residentes en la ciudad de Belo Horizonte-Brasil. Los resultados indican que las escalas verbales modificadas presentan una alta fiabilidad (alpha >0,80 asi como la presencia clara de un unico componente responsable por 81% y 64% de la variancia del WIC-III e WAIS-III respectivamente. Se ha concluido que las modificaciones efectuadas no han comprometido la estructura factorial de las escalas verbales. Por tanto, los profesionales psicólogos pueden utilizar las escalas modificadas para la evaluación de la inteligencia de personas portadoras de ceguera.Owing to the almost lack of a national research on psychological testing for the evaluation of blind people, a psychometric study has been developed with the WISC-III and WAIS-III

  11. Solvent extraction of anionic chelate complexes of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) with 2-thenoyltrifluoroacetone as ion-pairs with tetrabutylammonium ions

    International Nuclear Information System (INIS)

    Noro, Junji; Sekine, Tatsuya.

    1992-01-01

    The solvent extraction of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) in 0.1 mol dm -3 sodium nitrate solutions with 2-thenoyltrifluoroacetone (Htta) in the absence and presence of tetrabutylammonium ions (tba + ) into carbon tetrachloride was measured. The extraction of lanthanum(III), europium(III), and lutetium(III) was greatly enhanced by the addition of tba + ; this could be explained in terms of the extraction of a ternary complex, M(tta) 4 - tba + . However, the extractions of scandium(III) and indium(III) were nearly the same when tba + was added. The data were treated on the basis of the formation equilibrium of the ternary complex from the neutral chelate, M(tta) 3 , with the extracted ion-pairs of the reagents, tta - tba + , in the organic phase. It was concluded that the degree of association of M(tta) 3 with the ion-pair, tta - tba + , is greater in the order La(tta) 3 ≅ Eu(tta) 3 > Lu(tta) 3 , or that the stability of the ternary complex in the organic phase is higher in the order La(tta) 4 - tba + ≅ Eu(tta) 4 - tba + > Lu(tta) 4 - tba + . This is similar to those of adduct metal chelates of Htta with tributylphosphate (TBP) in synergistic extraction systems. (author)

  12. Spring 2007. Industry Study. Manufacturing Industry

    Science.gov (United States)

    2007-01-01

    their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

  13. Industry Study, Weapons Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    Agencies Sdn. Bhd.; Malaysia Aircraft Inspection, Repair, and Overhaul Depot; Malaysia American Malaysian Chamber of Commerce; Malaysia Samsung Techwin...Ministry of Defense: Defense Science and Technology Agency; Singapore Ministry of Defense: Industrial Affairs Office; Malaysia Boustead Shipping...Singapore, Malaysia , and Korea). Recommended policy changes included in the conclusion will strengthen these conditions, given that government goals and

  14. Industry Study, Electronics Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    not have the flexibility in their processes to quickly produce custom system-on-chips because they are optimized for high-end production. Dell ...building its semiconductor industry, Malaysia has moved in the same overall directions but has lagged a few years. Malaysia has succeeded in the backend

  15. Polish food industry 2008-2013

    OpenAIRE

    Mroczek, Robert; Drożdż, Jadwiga; Tereszczuk, Mirosława; Urban, Roman

    2014-01-01

    The aim of the study is to evaluate the functioning of the food industry and its various sectors in 2008-2013. Meat and poultry industry. Dairy industry. Fishing industry. Milling industry. Sugar industry. Oil-mill industry. Processing of fruit, vegetables and potatoes. Bakery industry. Confectionery industry. Feed industry. Production of other food products. Production of alcoholic beverages.Tobacco industry. Food industry.

  16. WISC-III e WAIS-III na avaliação da inteligência de cegos WISC-III/WAIS-III en ciegos WISC-III and WAIS-III in intellectual assessment of blind people

    OpenAIRE

    Elizabeth do Nascimento; Carmen Elvira Flores-Mendoza

    2007-01-01

    Diante da escassez de pesquisas nacionais e de testes psicológicos destinados a avaliar pessoas cegas, desenvolveu-se um estudo psicométrico com as escalas verbais dos testes WISC-III e WAIS-III. Após as adaptações de alguns estímulos e das instruções, os testes foram aplicados em crianças (N = 120) e adultos (N = 52) residentes em Belo Horizonte. Os resultados indicaram que as escalas verbais modificadas apresentam uma boa consistência interna (alfa> 0,80). Além disso, a investigação da vali...

  17. Pharmacist-industry relationships.

    Science.gov (United States)

    Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

    2017-12-01

    The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

  18. Geothermal industry assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  19. Aluminum Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-02-01

    This roadmap describes the industry's R&D strategy, priorities, milestones, and performance targets for achieving its long-term goals. It accounts for changes in the industry and the global marketplace since the first roadmap was published in 1997. An updated roadmap was published November 2001. (PDF 1.1 MB).

  20. Industry and Happiness

    DEFF Research Database (Denmark)

    Olsén, Peter; Nielsen, Birger Steen; Nielsen, Kurt Aagaard

    1996-01-01

    A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry.......A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry....

  1. Uranium industry annual 1998

    International Nuclear Information System (INIS)

    1999-01-01

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

  2. EU Industrial Policy

    DEFF Research Database (Denmark)

    Pellegrin, Julie; Giorgetti, Maria Letizia; Jensen, Camilla

    Following disregard in the 1980s, industrial policy has recently attracted policy attention at EU level. The objective of this study provided by Policy Department A at the request of the ITRE Committee, is to establish the state of the art of a coordinated and integrated EU industrial policy...

  3. Industrial applications and metallurgy

    International Nuclear Information System (INIS)

    Torres M, N.; Melendrez C, G.; Morales, F.L.

    1989-01-01

    From 1961 the use of nuclear energy in the industrial field in Colombia has a big advance. Today nuclear isotopes are used by private companies in this kind of application the Area of Industrial Applications and Metallurgy was the institution section that has trained and has transferred the technology needed for this purpose

  4. Manual on industrial radiography

    International Nuclear Information System (INIS)

    1981-08-01

    This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

  5. Innovations in Hospitality Industry

    Science.gov (United States)

    Dzhandzhugazova, Elena A.; Blinova, Ekaterina A.; Orlova, Liubov N.; Romanova, Marianna M.

    2016-01-01

    The article focuses on the study of the role and importance of innovation, its classification, the problems of its application in the hotel industry with emphasis on the application of sensory marketing tools in the development of the innovative marketing mix within the hospitality industry. The article provides an analysis of the "seven…

  6. Uranium industry annual 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

  7. RESTRUCTURING OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    L. I. Podderegina

    2009-01-01

    Full Text Available The paper presents main principles for execution of current and strategic restructuring of national enterprises while using experience of countries with developed market economy. The principles contribute to higher efficiency in internal industrial relations at national industrial enterprises.

  8. Australian uranium industry

    Energy Technology Data Exchange (ETDEWEB)

    Warner, R K

    1976-04-01

    Various aspects of the Australian uranium industry are discussed including the prospecting, exploration and mining of uranium ores, world supply and demand, the price of uranium and the nuclear fuel cycle. The market for uranium and the future development of the industry are described.

  9. Commercial Banking Industry Survey.

    Science.gov (United States)

    Bright Horizons Children's Centers, Cambridge, MA.

    Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

  10. Nuclear industry chart

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    As part of a survey on Switzerland a pull-out organisation chart is presented of the nuclear industry showing Swiss government bodies and industrial concerns. Their interests, connections with each other and their associations with international and other national organizations and firms are indicated. (U.K.)

  11. The Danish Industrial Foundations

    DEFF Research Database (Denmark)

    Thomsen, Steen

    and governed, what role it plays in the Danish economy, and how industrial foundation-owned companies perform. The book is the result of a large collaborative research project, led by the author, on industrial foundations. Some global companies such as IKEA, Robert Bosch or the Tata Group are foundation...

  12. Insurance industry guide

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is an insurance industry guide for the independent power industry. The directory includes the insurance company's name, address, telephone and FAX numbers and a description of the company's area of expertise, products and services, and limitations. The directory is international in scope. Some of the companies specialize in independent power projects

  13. Sustainable Industrial Production

    DEFF Research Database (Denmark)

    Christensen, Irene

    2015-01-01

    The purpose of this case is to create awareness about a somewhat unfamiliar industry that accounts for over €3 billion in Scandinavia and £5,6 billion in the UK, the Metals recycling industry. The case features a Scandinavian Company and includes several perspectives from managerial disciplines...

  14. Sustainable Industrial Production

    DEFF Research Database (Denmark)

    Brattebö, Helge; Jørgensen, Michael Søgaard; Lorentzen, Børge

    The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies.......The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies....

  15. Wanted! Industrial Hygienists.

    Science.gov (United States)

    Stilkind, Jerry

    1979-01-01

    Due to increased pressure (for example, from the Occupational Safety and Health Act) to create healthier/safer worker environments, the number of industrial hygienist positions has increased. Compares the need to the demand. Examines industrial hygienist salary ranges, expected educational background, job opportunities, and training program…

  16. Greening of Danish Industry

    DEFF Research Database (Denmark)

    Remmen, Arne

    2002-01-01

    The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry.......The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry....

  17. Nuclear industry takes off

    International Nuclear Information System (INIS)

    Du Plessis, A.; Stevens, R.C.B.

    1982-01-01

    For more than a decade irradiation sterilisation of medical and pharmaceutical products proved a highly successful semi-commercial operation at Pelindaba, until it made way recently for the first full-scale radiation processing industry in SA - a classic case of science transferring technology to industry

  18. ATLAS rewards industry

    CERN Document Server

    Maximilien Brice

    2006-01-01

    For contributing vital pieces to the ATLAS puzzle, three industries were recognized on Friday 5 May during a supplier awards ceremony. After a welcome and overview of the ATLAS experiment by spokesperson Peter Jenni, CERN Secretary-General Maximilian Metzger stressed the importance of industry to CERN's scientific goals. Picture 30 : representatives of the three award-wining companies after the ceremony

  19. Uranium industry annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  20. Indian refining industry

    International Nuclear Information System (INIS)

    Singh, I.J.

    2002-01-01

    The author discusses the history of the Indian refining industry and ongoing developments under the headings: the present state; refinery configuration; Indian capabilities for refinery projects; and reforms in the refining industry. Tables lists India's petroleum refineries giving location and capacity; new refinery projects together with location and capacity; and expansion projects of Indian petroleum refineries. The Indian refinery industry has undergone substantial expansion as well as technological changes over the past years. There has been progressive technology upgrading, energy efficiency, better environmental control and improved capacity utilisation. Major reform processes have been set in motion by the government of India: converting the refining industry from a centrally controlled public sector dominated industry to a delicensed regime in a competitive market economy with the introduction of a liberal exploration policy; dismantling the administered price mechanism; and a 25 year hydrocarbon vision. (UK)

  1. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  2. Manufacturing Industry, Industry Study, Spring 2009

    Science.gov (United States)

    2009-01-01

    Shuib, Lieutenant Colonel, Royal Malaysian Air Force Kevin Brennan, Commander, U.S. Navy Mr. K. Ilia Christman, Department of the Navy Robert Costa...panel to review the impact of taxation , regulatory compliance, and benefits burdens on domestic manufacturers. Review would bring focus to ways...Finally, the MISG considered the effect of these 14 characteristics on the U.S. Manufacturing Industry vis-à-vis Chinese and Malaysian

  3. Hydration structure of Ti(III) and Cr(III): Monte Carlo simulation ...

    African Journals Online (AJOL)

    Classical Monte Carlo simulations were performed to investigate the solvation structures of Ti(III) and Cr(III) ions in water with only ion-water pair interaction potential and by including three-body correction terms. The hydration structures were evaluated in terms of radial distribution functions, coordination numbers and ...

  4. Teachers' Guide to Music Appreciation III A and III B in the Senior High School.

    Science.gov (United States)

    Scott, J. Mark; Dawkins, Barbara R.

    This guide to music appreciation courses was developed for use in senior high schools in Duval County, Jacksonville, Florida. Music Appreciation III A examines the development of music, from the Gothic period through the Classical period. Music Appreciation III B examines the development of music from the Romantic period through the 1970s.…

  5. NMR and TRLFS studies of Ln(iii) and An(iii) C5-BPP complexes.

    Science.gov (United States)

    Adam, Christian; Beele, Björn B; Geist, Andreas; Müllich, Udo; Kaden, Peter; Panak, Petra J

    2015-02-01

    C5-BPP is a highly efficient N-donor ligand for the separation of trivalent actinides, An(iii), from trivalent lanthanides, Ln(iii). The molecular origin of the selectivity of C5-BPP and many other N-donor ligands of the BTP-type is still not entirely understood. We present here the first NMR studies on C5-BPP Ln(iii) and An(iii) complexes. C5-BPP is synthesized with 10% 15 N labeling and characterized by NMR and LIFDI-MS methods. 15 N NMR spectroscopy gives a detailed insight into the bonding of C5-BPP with lanthanides and Am(iii) as a representative for trivalent actinide cations, revealing significant differences in 15 N chemical shift for coordinating nitrogen atoms compared to Ln(iii) complexes. The temperature dependence of NMR chemical shifts observed for the Am(iii) complex indicates a weak paramagnetism. This as well as the observed large chemical shift for coordinating nitrogen atoms show that metal-ligand bonding in Am(C5-BPP) 3 has a larger share of covalence than in lanthanide complexes, confirming earlier studies. The Am(C5-BPP) 3 NMR sample is furthermore spiked with Cm(iii) and characterized by time-resolved laser fluorescence spectroscopy (TRLFS), yielding important information on the speciation of trace amounts of minor complex species.

  6. Enhancement of the fluorescence of the samarium (III) complex by gadolinium (III)

    International Nuclear Information System (INIS)

    Yun-Xiang, C.; Zhang-Hua, L.

    1988-01-01

    The increase in sensitivity and selectivity of reactions in which colored species are formed by the addition of different metal ions is an area of research that has recently been developed. This phenomenon, which is sometimes called cocolaration effect, has been explained by the formation of mixed metal complex. The authors found an analogous phenomenon of reactions forming fluorescent complexes. The complexes of Sm(III)-thenoyltrifluoroacetone (TTA)-phenanthroline (Phen)-Triton-X-100 (TX-100) and Gd(III) (or La(III), Lu(III) and Y(III))-TTA-Phen-TX-100 had practically no fluorescence separately. Instead, a fluorescence-enhancement phenomenon caused by adding Gd or La, Lu and Y ions to the system was observed for the first time. The intensity of the enhanced fluorescence of Sm(III) complex was increased in the following order: La< Y< Lu< Gd. By analogy with cocoloration effect, the authors call this new fluorescence-enhancement phenomenon the co-fluorescence effect. The object of this work was to study the enhancement effect of Gd(III) on the fluorescence of the Sm(III)-TTA-Phen-TX-100 system. The recommended fluorimetric method has been applied to the determination of trace amounts of samarium in ytterbium oxide with satisfactory results. A general reaction mechanism for the system studied was proposed

  7. Transuranium perrhenates: Np(IV), Pu(IV) and (III), Am (III)

    International Nuclear Information System (INIS)

    Silvestre, Jean-Paul; Freundlich, William; Pages, Monique

    1977-01-01

    Synthesis in aqueous solution and by solid state reactions, crystallographical characterization and study of the stability of some transuranium perrhenates: Asup(n+)(ReO 4 - )sub(n) (A=Np(IV), Pu(IV), Pu(III), Am(III) [fr

  8. III-V-on-silicon solar cells reaching 33% photoconversion efficiency in two-terminal configuration

    Science.gov (United States)

    Cariou, Romain; Benick, Jan; Feldmann, Frank; Höhn, Oliver; Hauser, Hubert; Beutel, Paul; Razek, Nasser; Wimplinger, Markus; Bläsi, Benedikt; Lackner, David; Hermle, Martin; Siefer, Gerald; Glunz, Stefan W.; Bett, Andreas W.; Dimroth, Frank

    2018-04-01

    Silicon dominates the photovoltaic industry but the conversion efficiency of silicon single-junction solar cells is intrinsically constrained to 29.4%, and practically limited to around 27%. It is possible to overcome this limit by combining silicon with high-bandgap materials, such as III-V semiconductors, in a multi-junction device. Significant challenges associated with this material combination have hindered the development of highly efficient III-V/Si solar cells. Here, we demonstrate a III-V/Si cell reaching similar performances to standard III-V/Ge triple-junction solar cells. This device is fabricated using wafer bonding to permanently join a GaInP/GaAs top cell with a silicon bottom cell. The key issues of III-V/Si interface recombination and silicon's weak absorption are addressed using poly-silicon/SiOx passivating contacts and a novel rear-side diffraction grating for the silicon bottom cell. With these combined features, we demonstrate a two-terminal GaInP/GaAs//Si solar cell reaching a 1-sun AM1.5G conversion efficiency of 33.3%.

  9. An Axiomatic Design Approach of Nanofluid-Engineered Nuclear Safety Features for Generation III+ React

    International Nuclear Information System (INIS)

    Bang, In Cheol; Heo, Gyun Young; Jeong, Yong Hoon; Heo, Sun

    2009-01-01

    A variety of Generation III/III+ reactor designs featuring enhanced safety and improved economics are being proposed by nuclear power industries around the world to solve the future energy supply shortfall. Nanofluid coolants showing an improved thermal performance are being considered as a new key technology to secure nuclear safety and economics. However, it should be noted that there is a lack of comprehensible design works to apply nanofluids to Generation III+ reactor designs. In this work, the review of accident scenarios that consider expected nanofluid mechanisms is carried out to seek detailed application spots. The Axiomatic Design (AD) theory is then applied to systemize the design of nanofluid-engineered nuclear safety systems such as Emergency Core Cooling System (ECCS) and External Reactor Vessel Cooling System (ERVCS). The various couplings between Gen-III/III+ nuclear safety features and nanofluids are investigated and they try to be reduced from the perspective of the AD in terms of prevention/mitigation of severe accidents. This study contributes to the establishment of a standard communication protocol in the design of nanofluid-engineered nuclear safety systems

  10. Gait and Function in Class III Obesity

    Directory of Open Access Journals (Sweden)

    Catherine Ling

    2012-01-01

    Full Text Available Walking, more specifically gait, is an essential component of daily living. Walking is a very different activity for individuals with a Body Mass Index (BMI of 40 or more (Class III obesity compared with those who are overweight or obese with a BMI between 26–35. Yet all obesity weight classes receive the same physical activity guidelines and recommendations. This observational study examined the components of function and disability in a group with Class III obesity and a group that is overweight or has Class I obesity. Significant differences were found between the groups in the areas of gait, body size, health condition, and activity capacity and participation. The Timed Up and Go test, gait velocity, hip circumference, and stance width appear to be most predictive of activity capacity as observed during gait assessment. The findings indicate that Class III-related gait is pathologic and not a normal adaptation.

  11. BALTICA III. Plant condition and life management

    International Nuclear Information System (INIS)

    Hietanen, S.; Auerkari, P.

    1995-01-01

    The BALTICA III, International Conference on Plant Condition and Life Management was held on June 6 - 8, 1995 on board Silja Serenade on its cruise between Helsinki - Stockholm and at the Forest Lake Hotel Korpilampi in Espoo. BALTICA III provides forum for the transfer of technology from applied research to practise. This is the second volume of the publications, which contain the presentations given at the BALTICA III, Plant Condition and Life Management. A total of 45 articles report recent experience in plant condition and life management. The conference focuses on recent applications that have been demonstrated for the benefit of safe and economical operation of power plants. Practical approach is emphasised, including the presentations that aim to provide insight into new techniques, improvements in assessment methodologies as well as maintenance strategies. Compared to earlier occasions in the BALTICA series, a new aspect is in the applications of knowledge-based systems in the service of power plant life management. (orig.)

  12. Relevance of Industrial and Science Parks to Industrial ...

    African Journals Online (AJOL)

    Here, we reviewed the impact of Industrial and Science Parks on industrial ... and stimulate the development of small and medium size enterprises as a base for ... In order to achieve these, emphasis should be on establishing Industrial and ... transfer, industrial park, Science Park, industrial development, innovation, ...

  13. How industries change.

    Science.gov (United States)

    McGahan, Anita M

    2004-10-01

    It's fairly obvious: To make intelligent investments within your organization, you need to understand how your whole industry is changing. But such knowledge is not always easy to come by. Companies misread clues and arrive at false conclusions all the time. To truly understand where your industry is headed, you have to take a long-term, high-level look at the context in which you do business, says Boston University professor Anita McGahan. She studied a variety of businesses from a cross section of industries over a ten-year period, examining how industry structure affects business profitability and investor returns. Her research suggests that industries evolve along one of four distinct trajectories--radical, progressive, creative, and intermediating--that set boundaries on what will generate profits in a business. These four trajectories are defined by two types of threats. The first is when new, outside alternatives threaten to weaken or make obsolete core activities that have historically generated profits for an industry. The second is when an industry's core assets--its resources, knowledge, and brand capital--fail to generate value as they once did. Industries undergo radical change when core assets and core activities are both threatened with obsolescence; they experience progressive change when neither are jeopardized. Creative change occurs when core assets are under threat but core activities are stable, and intermediating change happens when core activities are threatened while core assets retain their capacity to create value. If your company's innovation strategy is not aligned with your industry's change trajectory, your plan for achieving returns on invested capital cannot succeed, McGahan says. But if you understand which path you're on, you can determine which strategies will succeed and which will backfire.

  14. Electrochemical reduction of Eu (III) in propionic media

    International Nuclear Information System (INIS)

    Brotto, M.E.; Rabockai, T.

    1988-01-01

    Some chronopotentiometric studies of Eu (III) electro-reducion in propionic media that suggests the presence of two parallel rections: Eu (III) → Eu (II) and Eu (III) → Eu (II) → Y are presented. Some experimental data, such Eu (III) reducion, electrolysis of solutions and ionic power of the system are discussed. (M.J.C.) [pt

  15. SIMMER-III analytic thermophysical property model

    International Nuclear Information System (INIS)

    Morita, K; Tobita, Y.; Kondo, Sa.; Fischer, E.A.

    1999-05-01

    An analytic thermophysical property model using general function forms is developed for a reactor safety analysis code, SIMMER-III. The function forms are designed to represent correct behavior of properties of reactor-core materials over wide temperature ranges, especially for the thermal conductivity and the viscosity near the critical point. The most up-to-date and reliable sources for uranium dioxide, mixed-oxide fuel, stainless steel, and sodium available at present are used to determine parameters in the proposed functions. This model is also designed to be consistent with a SIMMER-III model on thermodynamic properties and equations of state for reactor-core materials. (author)

  16. Aufbau des humanoiden Roboters BART III

    Science.gov (United States)

    Resetov, Dimitri; Pietsch, Björn; Gerth, Wilfried

    Der vorliegende Beitrag präsentiert den humanoiden Roboter BART III, der am Institut für Regelungstechnik als eine robuste und erweiterbare Plattform für weiterführende Grundlagenforschung zur zweibeinigen Fortbewegung entwickelt wurde. Im Gegensatz zu den bisher am IRT genutzten Robotern BARt-UH und LISA besitzt der neue Roboter einen beweglichen Oberkörper mit einem Bauchgelenk und Armen. BART III besitzt insgesamt 19 aktive Freiheitsgrade, 12 davon im Unterkörper. Ein weiteres Merkmal des Roboters ist die im gesamten Körper verteilte Ansteuerelektronik, die neben der lokalen Motorregelung diverse sicherheitsrelevante Funktionen übernimmt.

  17. Thermal behaviour of cesiumchloroferrates(III). 4

    International Nuclear Information System (INIS)

    Ziemer, B.; Fest, M.; Hass, D.; Leibnitz, P.

    1989-01-01

    Tricesium aquapentachloroferrate(III) chloride crystallizes from acid aqueous solutions of FeCl 3 · 6 H 2 O and CsCl in the triclinic space group P-bar1 with a = 714.1 pm, b = 1070.9 pm, c = 950.4 pm, α = 105.65 0 , β = 109.51 0 , γ = 89.08 0 and Z = 2. The compound is formed also from dicesium aquapentachloroferrate(III) and cesium chloride in a solid state reaction. The orientational relationships between the educt and product phases are elucidated, and a topotactic reaction mechanism is discussed. (author)

  18. Prediction of ROSA-III experiment

    International Nuclear Information System (INIS)

    Soda, Kunihisa

    1978-06-01

    ROSA-III experiment with the simulated BWR system is to investigate thermal hydraulic behavior as well as ECCS performance in a postulated loss-of-coolant accident. RUN 701 assumes average core power, high and low pressure core sprays and low pressure injection of ECCS. Prediction of experiment RUN 701 was made with computer code RELAP-4J. The results indicate the need for ROSA-III pump characteristics to be clarified and for liquid level formation model to be improved. Comparison of the prediction results with the experimental data should reveal the areas of modifications in calculation model. (auth.)

  19. Construction of the Cleo III drift chamber

    International Nuclear Information System (INIS)

    Csorna, S.; Marka, S.; Dickson, M.; Dombrowski, S. von; Peterson, D.; Thies, P.; Glenn, S.; Thorndike, E.H.; Kravchenko, I.

    1998-01-01

    The CLEO III group is constructing a new chamber to be installed as part of the staged luminosity upgrade program at the Cornell electron storage ring and compatible with the interaction region optics. Although having less radial extent than the current CLEO II tracking system, CLEO III will have equivalent momentum resolution because of material reduction in the drift chamber inner skin and gas. The thin inner skin requires special attention to the end-plate motion due to wire creep. During stringing, use of a robot will fully automate the wire handling on the upper end. (author)

  20. Energy conservation in industry

    International Nuclear Information System (INIS)

    Pembleton, P.

    1992-01-01

    Energy Conservation in Industry is the first number in the Energy and Environmental Series of the Industrial and Technological Information Bank (INTIB). The Series supersedes the INECA Journal and reflects the broader information programme undertaken by INTIB. The present number of the Series contains contributions from three major international databases and five topic-specific sources, including three United Nations Organizations. The present publication consists of a recent technical report on a current topic: reducing energy loss in four industrial sectors and improving energy conservation through waste-heat recovery, followed by two sections containing abstracts of technical materials

  1. Irradiation technology - industrial use

    International Nuclear Information System (INIS)

    Zyball, A.

    1995-01-01

    The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

  2. Uranium industry annual, 1991

    International Nuclear Information System (INIS)

    1992-10-01

    In the Uranium Industry Annual 1991, data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2. A feature article entitled ''The Uranium Industry of the Commonwealth of Independent States'' is included in this report

  3. Uranium Industry. Annual 1984

    International Nuclear Information System (INIS)

    Lawrence, M.S.S.

    1985-01-01

    This report provides a statistical description of activities of the US uranium industry during 1984 and includes a statistical profile of the status of the industry at the end of 1984. It is based on the results of an Energy Information Administration (EIA) survey entitled ''Uranium Industry Annual Survey'' (Form EIA-858). The principal findings of the survey are summarized under two headings - Uranium Raw Materials Activities and Uranium Marketing Activities. The first heading covers exploration and development, uranium resources, mine and mill production, and employment. The second heading covers uranium deliveries and delivery commitments, uranium prices, foreign trade in uranium, inventories, and other marketing activities. 32 figs., 48 tabs

  4. Petroleum industry 1996

    International Nuclear Information System (INIS)

    1997-01-01

    A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector's companies (oil groups, para-petroleum French industry, scientific and technical research)

  5. Energy conservation in the primary aluminum and chlor-alkali industries

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

  6. Industries and environment - 2014 edition

    International Nuclear Information System (INIS)

    Maurice, Delphine

    2014-04-01

    After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

  7. Inner-sphere and outer-sphere complexes of yttrium(III), lanthanum (III), neodymium(III), terbium(III) and thulium(III) with halide ions in N,N-dimethylformamide

    International Nuclear Information System (INIS)

    Takahashi, Ryouta; Ishiguro, Shin-ichi

    1991-01-01

    The formation of chloro, bromo and iodo complexes of yttrium(III), and bromo and iodo complexes of lanthanum(III), neodymium(III), terbium(III) and thulium(III) has been studied by precise titration calorimetry in N,N-dimethylformamide (DMF) at 25 o C. The formation of [YCl] 2+ , [YCl 2 ] + , [YCl 3 ] and [YCl 4 ] - , and [MBr] 2+ and [MBr 2 ] + (M = Y, La, Nd, Tb, Tm) was revealed, and their formation constants, enthalpies and entropies were determined. It is found that the formation enthalpies change in the sequence ΔH o (Cl) > ΔH o (l), which is unusual for hard metal (III) ions. This implies that, unlike the chloride ion, the bromide ion forms outer-sphere complexes with the lanthanide(III) and yttrium(III) ions in DMF. Evidence for either an inner- or outer-sphere complex was obtained from 89 Y NMR spectra for Y(ClO 4 ) 3 , YCl 3 and YBr 3 DMF solutions at room temperature. (author)

  8. The Aircraft Industry, 2006

    National Research Council Canada - National Science Library

    Daniel, Keith

    2006-01-01

    .... and global economic growth. The overall outlook for the industry is positive. Orders for commercial aircraft are up from a boom in air travel that is likely to continue well into the next decade...

  9. Uranium Industry Annual, 1992

    International Nuclear Information System (INIS)

    1993-01-01

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ''Decommissioning of US Conventional Uranium Production Centers,'' is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2

  10. Industrial implications of hydrogen

    International Nuclear Information System (INIS)

    Pressouyre, G.M.

    1982-01-01

    Two major industrial implications of hydrogen are examined: problems related to the effect of hydrogen on materials properties (hydrogen embrittlement), and problems related to the use and production of hydrogen as a future energy vector [fr

  11. Nuclear techniques in industry

    International Nuclear Information System (INIS)

    Hammad, F.H.

    1994-01-01

    Nuclear techniques are utilized in almost every industry. The discussion in this paper includes discussions on tracer methods and uses nucleonic control systems technology; non-destructive testing techniques and radiation technology. 1 fig., 2 tabs

  12. Transportation Industry 2004

    National Research Council Canada - National Science Library

    Miller, Evan; Kathir, Nathan; Brogan, Dennis M

    2004-01-01

    ... and the environment in which the private sector operates. They must also assess the role of government in determining transportation policy, as federal, state, and local agencies regulate every mode of this industry. While the U.S...

  13. Uranium industry annual 1996

    International Nuclear Information System (INIS)

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs

  14. Education Industry, 2006

    National Research Council Canada - National Science Library

    2006-01-01

    The education industry is vital to United States (U.S.) national security as it is largely responsible for generating the human capital necessary to effectively integrate the various instruments of power to promote U.S. national interests...

  15. Industrial power distribution

    CERN Document Server

    Fehr, Ralph

    2016-01-01

    In this fully updated version of Industrial Power Distribution, the author addresses key areas of electric power distribution from an end-user perspective for both electrical engineers, as well as students who are training for a career in the electrical power engineering field. Industrial Power Distribution, Second Edition, begins by describing how industrial facilities are supplied from utility sources, which is supported with background information on the components of AC power, voltage drop calculations, and the sizing of conductors and transformers. Important concepts and discussions are featured throughout the book including those for sequence networks, ladder logic, motor application, fault calculations, and transformer connections. The book concludes with an introduction to power quality, how it affects industrial power systems, and an expansion of the concept of power factor, including a distortion term made necessary by the existence of harmonic.

  16. Industry Based Monkfish Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Monkfish industry leaders expressed concerns that the NEFSC bottom trawl surveys did not sample in all monkfish habitats; particularly the deeper water outside the...

  17. Industrial Activity at CERN

    CERN Document Server

    Kowalik, G

    2000-01-01

    The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

  18. The Educational Film Industry

    Science.gov (United States)

    Tortora, Vincent R.; Schillaci, Peter

    1975-01-01

    Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

  19. Financial Services Industry

    National Research Council Canada - National Science Library

    Arezo, Gullab; Billingslea, Willie D; Brooks, James V; Brown, Jeffery D; Cotton, Cheryl; Determan, Deborah A; Dzurenko, Monte S; Egentowich, John; Greenwald, Michael N; Keegan, Matthew

    2006-01-01

    .... The financial services industry impacts the daily lives of all Americans. They rely on it to save for their retirement and their children's education, pay their bills, insure against risks, and buy their homes and automobiles...

  20. ATLAS rewards industry

    CERN Multimedia

    2006-01-01

    Showing excellence in mechanics, electronics and cryogenics, three industries are honoured for their contributions to the ATLAS experiment. Representatives of the three award-wining companies after the ceremony. For contributing vital pieces to the ATLAS puzzle, three industries were recognized on Friday 5 May during a supplier awards ceremony. After a welcome and overview of the ATLAS experiment by spokesperson Peter Jenni, CERN Secretary-General Maximilian Metzger stressed the importance of industry to CERN's scientific goals. Close interaction with CERN was a key factor in the selection of each rewarded company, in addition to the high-quality products they delivered to the experiment. Alu Menziken Industrie AG, of Switzerland, was honoured for the production of 380,000 aluminium tubes for the Monitored Drift Tube Chambers (MDT). As Giora Mikenberg, the Muon System Project Leader stressed, the aluminium tubes were delivered on time with an extraordinary quality and precision. Between October 2000 and Jan...

  1. Shipbuilding Industry Study 2004

    National Research Council Canada - National Science Library

    Montroll, Mark; Johnson, Keith; Chandler, Brett; Wood, Robert; Hale, Timothy; Nally, Kevin; Harmand, Patrick; Danielescu, Marius; McQueen, Rick; Larese, William S

    2004-01-01

    ...-going military vessels. As capable as the U.S. shipbuilding industry is in responding to the world's most demanding National Security Strategy, the same cannot be said in the global commercial marketplace...

  2. Information Technology Industry 2004

    National Research Council Canada - National Science Library

    Altieri, Richard; Buccheit, Nathan; Burke, Kyle; Dillard, Norvel; Dolan, Patrick; Edwards, Gregory; Elins, Daniel; Gaines, Leonard; Goodwin, Steven; Lawrence, Michael

    2004-01-01

    .... This study will define the Information Technology Industry, give an overview of current domestic and international conditions, and then analyze the state of national network security and challenges faced by the U.S. government and U.S...

  3. Servitization in Industrial Firms

    DEFF Research Database (Denmark)

    Hsuan, Juliana; Frandsen, Thomas; Raja, Jawwad

    This booklet outlines the breadth and depth of services offered by Danish manufacturing companies, aiming to provide a better understanding of the servitization landscape in Denmark. A total of 1,103 company websites have been checked against 16 service categories. Of these, 939 companies were...... analyzed in more detail, for example with regard to the types of services offered, company size, industry representation, turnover and earnings before interest and tax (EBIT). The analysis presented in this booklet may inspire Danish firms and help them, in their servitization journeys, to position...... themselves in relation to other companies in similar or related industries. In setting out a brief overview of the overall industrial service landscape in Denmark, the following is highlighted: - The extent to which Danish industrial firms are communicating service offerings through their websites...

  4. Chromatography in Industry

    Science.gov (United States)

    Schoenmakers, Peter

    2009-07-01

    This review focuses on the chromatography research that has been carried out within industry or in close cooperation with industry and that has been reported in the scientific literature between 2006 and mid-2008. Companies in the health care sector, such as pharmaceutical and biotechnology companies, are the largest contributors. Industrial research seems to take place in an open environment in cooperation with academia, peer companies, and institutions. Industry appears ready to embrace new technologies as they emerge, but they focus strongly on making chromatography work robustly, reliably, rapidly, and automatically. “Hyphenated” systems that incorporate on-line sample-preparation techniques and mass-spectrometric detection are the rule rather than the exception. Various multidimensional separation methods are finding numerous applications. Strategies aimed at speeding up the development of new chromatographic methods remain the focus of attention. Also, there is a clear trend toward exploring chromatographic methods for parallel processing along with other strategies for high-throughput analysis.

  5. Industrial applications at GANIL

    International Nuclear Information System (INIS)

    Delagrange, H.

    1993-01-01

    After a first round of industrial applications using heavy ion beams, GANIL has refocused these activities along the lines defined by a strategy and market study. Heavy ion industrial applications take their roots in the physical effects of the interactions occurring between heavy ion projectiles and matter. Specific equipments operated by GANIL or CIRIL allow users to take benefit from these effects. By heavy ion irradiation, industrial companies qualify radiation hardened electronic components and sensitize plastic films to produce 'nuclear track' membranes. Research and development programs with laboratories of the public sector, focus on heavy ion lithography dedicated to large area luminescent flat screens with field emitter microtips and on tribology with radioactive implanted ions. Even sometimes facing difficulties to fill the gap between industry and research, GANIL is eager to promote heavy ion beam technologies. (author) 36 refs., 6 figs., 5 tabs

  6. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  7. Uranium Industry Annual, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-28

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  8. Entrepreneurship in Creative Industries

    Directory of Open Access Journals (Sweden)

    Jūratė Černevičiūtė

    2011-10-01

    Full Text Available Creative industries topic is closely related to the art markets in a variety of mediation forms. Traditional business entrepreneurship is risk-related activities implementing innovations in markets, and generating economic growth. The creative industry area has plenty of innovation, but its acceptance is more complex because of the cultural world’s participants’ agreements. Cultural world has its own social organization, associated with the mediation (including entrepreneurship types. The article examines the concept of entrepreneurship in the traditional business and creative industries and types of innovation and mediation (including entrepreneurship. The conclusion is that types of intermediary in creative industries depend on the cultural world’s social organization, and forms of mediation are more heterogeneous than in the traditional business. 

  9. Nuclear measurements in industry

    International Nuclear Information System (INIS)

    Rozsa, S.

    1989-01-01

    In this book the author provides a description of nuclear measurements in industry, covering the physical principles, methods, instruments and equipment, and industrial applications. One of the great advantages of industrial nuclear measurements is that their use ensures the optimum use of raw material. The increasing cost of raw materials makes it essential to adhere strictly to the standards and prescriptions related to the product and this is possible only by the application of continuous and accurate measurements. As a result, the importance of nuclear instruments is rapidly growing particularly in fields where the application of alternative methods is not possible. This is illustrated by several practical examples described in the book. Similarly important are nuclear measuring the process control equipment which serve to optimize the use of energy in industrial processes

  10. NEW ECO-EFFICIENT PRODUCTS USED IN LEATHER INDUSTRY

    Directory of Open Access Journals (Sweden)

    ROSU Dan

    2016-05-01

    Full Text Available In today's move to "sustainable production" the leather industry, as well as many other industries is recognized as a polluting one. Traditional chemical operations are polluting because of the levels of inorganic chemical waste. Process chemicals which are not consumed within the reactions necessary to convert collagen to leather are currently discharged to waste. These are usually applied during bulk production, such as inorganic agents from beam house and tanning processes, e.g. lime, sulphide, ammonium salts, sulphuric acid and sodium chloride, mineral tanning agents – mainly Cr(III and the less common Al(III, Zr(III, Ti(III, Fe(III salts -, whereas depending on the tanning process and the leather article produced organic chemical waste discharged comprises aldehydic and polyphenolic tanning products, bating enzymes, organic carboxylic acids and excess electrolyte stable synthetic fat liquors. It is rare for chemicals and water to be recovered for re-use from several of these process steps. Moreover, tanners worldwide are required to operate within strict legislative boundaries. Serious drawbacks continuously arise concerning the chrome–tanning process in leather industry and the environmental hazardous consequences of chromium containing effluents. In order to overcome this impediment, a great deal of research has been focused on developing chrome–free tanning methods in the past years, such as titanium tanning. In the present study, Ti–Al tanned bovine leather was characterized by means of SEM microscopy, EDAX elemental analysis, ATR–FTIR spectroscopy, thermogravimetry TGA, and differential scanning calorimetry DSC techniques.

  11. Luminescence studies of Sm(III) and Cm(III) complexes in NaSCN/DHDECMP extraction systems

    CERN Document Server

    Chung, D Y; Kimura, T

    1999-01-01

    Laser-induced fluorescence (LIF) studies of Sm(III) and Cm(III) complexes in the NaSCN/DHDECMP solvent extraction system were carried out. Luminescence lifetimes were measured to determine the number of water molecules coordinated to Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution and in the DHDECMP phase. The hydration number of Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution decreased linearly with increasing sodium thiocyanate concentration. The hydration numbers of Sm(III), Dy(III), and Cm(III) in the DHDECMP phase decreased with increasing sodium thiocyanate concentration. The water molecules in the inner coordination sphere of Sm(III) and Dy(III) extracted into the DHDECMP were not completely removed at low sodium thiocyanate concentration but decreased with increasing sodium thiocyanate concentration. However, in the case of Cm(III) extracted into the DHDECMP phase from the sodium thiocyanate solution, there was no water in the inner coordination sphe...

  12. Uranium industry annual, 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This report presents data on US uranium raw materials and marketing activities of the domestic uranium industry. It contains aggregated data reported by US companies on the ''Uranium Industry Annual Survey'' (1988), Form EIA-858, and historical data from prior data collections and other pertinent sources. The report was prepared by the Energy Information Administration (EIA), the independent agency for data collection and analysis with the US Department of Energy

  13. Switzerland's electricity supply industry

    International Nuclear Information System (INIS)

    Inwyler, Ch.

    1980-01-01

    After a short description of Switzerland's electricity supply industry, the author comments on the production and consumption of electrical energy as well as on Switzerland's role within the European grid. A brief survey of electricity supply as a service is followed by a discussion of the political tools (such as e.g. the referendum, the hearing procedure etc.), which are an essential clue for understanding the position of the electricity supply industry in Switzerland. (Auth.)

  14. Green industrial policy

    OpenAIRE

    Dani Rodrik

    2014-01-01

    Green growth requires green technologies: production techniques that economize on exhaustible resources and emit fewer greenhouse gases. The availability of green technologies both lowers social costs in the transition to a green growth path and helps achieve a satisfactory rate of material progress under that path. The theoretical case in favour of using industrial policy to facilitate green growth is quite strong. Economists’ traditional scepticism on industrial policy is grounded instead o...

  15. Industrial Fuel Flexibility Workshop

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  16. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  17. 2001 Industry Studies: Education

    Science.gov (United States)

    2001-01-01

    schools sector is the image that comes to mind when most people think of education . It includ Page 3 of 22Industry Studies 2001 many childcare facilities ...negativism in public debate and the media concerning the U.S. education industry? Secretary of Education Rod Paige notes that even though statistics ...new skills requirements and a large influx of immigrants. The National Center for Education Statistics forecasts record level enrollments. Public

  18. Handbook of industrial lighting

    CERN Document Server

    Lyons, Stanley L

    2013-01-01

    Handbook of Industrial Lighting is a practical guide on the specification, design, installation, operation, and maintenance of lighting in industrial premises. Coverage of the book includes the importance of good localized lighting; the different lighting schemes; lighting for difficult visual tasks; lighting in consideration to safety; and emergency lighting. The book also includes the practical, thermal, ventilation, and energy considerations; lighting in different environments; maintenance of lighting installations; and the cost benefits of efficient lighting. Appendices include useful info

  19. Academia Meets Industry.

    Science.gov (United States)

    Schäfer, Christian; Paprotka, Tobias; Heitzer, Ellen; Eccleston, Mark; Noe, Johannes; Holdenrieder, Stefan; Diehl, Frank; Thierry, Alain

    2016-01-01

    Researchers working in industrial laboratories as well as in academic laboratories discussed topics related to the use of extracellular nucleic acids in different fields. These included areas like non-invasive prenatal diagnosis, the application of different methods for the analysis and characterization of patients with benign and malignant diseases and technical aspects associated with extracellular nucleic acids. In addition, the possibilities and chances for a cooperation of researchers working in different worlds, i.e. academia and industry, were discussed.

  20. The Italian Music Industry

    OpenAIRE

    Barbarito Luca; Ardizzone Antonella

    2010-01-01

    The Music Industry is a complex system in which many different actors interact. In this system there are suppliers of musical instruments, music schools, authors, singers, the phonographic industry, live events organizations and also the suppliers of those electronic devices necessary to listen to the music. This paper tries to analyze the size of those segments, their changes, and which are the key nodes in this system. Also the way we listen to music has changed a lot in this last 10 years,...

  1. Transformation of industrial territories

    Science.gov (United States)

    Plotnikova, N. I.; Kolocova, I. I.

    2017-08-01

    The problem of removing industrial enterprises from the historical center of the city and the subsequent effective use of the territories has been relevant for Western countries. Nowadays, the problem is crucial for Russia, its megacities and regional centers. The paper analyzes successful projects of transforming industrial facilities into cultural, business and residential objects in the world and in Russia. The patterns of the project development have been determined and presented in the paper.

  2. 2001 Industry Studies: Environment

    Science.gov (United States)

    2001-01-01

    Internet . 8 March 2001. xliii Henry Kelly, “ Information Technology and the Environment: Choices and Opportunities,” CISP.org (October 1999) pp 8...development. Despite only a small percentage of U.S. environmental businesses participating in the world market , the U.S. industry has the best technology ...businesses participating in the world market , the U.S. industry has the best technology in the world and already generates a trade surplus. With the world

  3. 2002 Industry Studies: Energy

    Science.gov (United States)

    2002-01-01

    Information technologies have facilitated the rapid growth of electronic market places across the energy industry for trading energy commodities, such as...and information technology industry has further increased the importance of abundant, low-cost, and reliable electric power. Recently, public...California, the country has recently slowed its efforts to make electricity markets more competitive. Recommendations. Unless some technological “silver bullet

  4. Industry's turnaround looks real

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The paper discusses the industry outlook for North American gas and oil industries. In a robust Canada, land sales are setting records, drilling is up, and output is rising beyond last year's 21% growth. A perception among US operators that wellhead prices will remain stable is translating to increased spending. The USA, Canada, Mexico, Cuba are evaluated separately, with brief evaluations of Greenland, Guatemala, Belize, and Costa Rico. Data are presented on drilling activities

  5. Responsability of nuclear industry

    International Nuclear Information System (INIS)

    Cadiz Deleito, J.C.

    1985-01-01

    Since the beginning of nuclear industry, civil responsibility with damages to the public health and properties was a critical problem, because the special conditions of this industry (nuclear accident, damages could be very high but probability of these events is very low). Legal precepts, universally accepted, in the first 60 years for all countries interested in nuclear energy are being revised, then 20 years of experience. The civil responsibility limited is being questioned and indemnities updated. (author)

  6. Petroleum industry in 2004

    International Nuclear Information System (INIS)

    2005-01-01

    This document presents a detailed outlook of the petroleum industry in the world and more particularly in France in 2005: evolution of crude oil prices; petroleum exploration and production in the world and in France; the French para-petroleum and petroleum industry; the oil supplies; the refining activities; the evolution of products quality and the substitution fuels; the domestic transports, the storage and consumption of petroleum products; the fiscality, prices and distribution of petroleum products. (J.S.)

  7. Entwicklungslinien der estnischen Industrie

    Directory of Open Access Journals (Sweden)

    Matti Raudjärv

    2013-01-01

    Full Text Available The problems related to industry are topical because there is no real industrial policy in Estonia today. The aim of this article is to provide an overview of the stages of development of Estonian industry in different periods (…–1858, ……, 2010–…. Estonian industry has been predominantly concentrated to Tallinn and its immediate vicinity and to other cities and towns of North Estonia, to a lesser extent also to other larger Estonian cities and county centres and their immediate vicinity. Disposition of industry in Estonia has been predominantly related to appropriate geographical conditions and existence of local natural resources and raw materials, traditions and experience but has also depended on decisions on economic policy in different periods, both on the national and local government levels. After regaining of independence there have been no particular fundamental positive changes in regional industrial development in Estonia, we can rather even talk about regression instead for some places. These are, however, necessary in order to ensure jobs to people in all inhabited regions, above all in rural areas. It would also contribute to a balanced regional development in Estonia.

  8. Industrial services at CERN

    CERN Multimedia

    2002-01-01

    The Bulletin looks at industrial services contracts and the real impact of the cost reductions at CERN. The level of industrial services contracts varies from one phase to another. For example, during the dismantling of LEP (photo) it rose substiantially to fall again at the end of dismantling. Industrial services contracts are an important resource for CERN. The level and nature of such contracts changes according to the phase of operation of the Laboratory. A construction phase, as for the LHC, requires a higher level of industrial services contracts compared with a period of normal running. During the operation of LEP, industrial services contracts were thus maintained at a level of 120 MCHF per year. The level rose to 156 MCHF in 2001 to include contracts awarded for dismantling LEP, and fell to about 144 MCHF in 2002 when the dismantling was complete. During the whole LHC construction period, up to 2007, industrial services spending will be stable in the range 135-140 MCHF per year. For the running pe...

  9. OCT for industrial applications

    Science.gov (United States)

    Song, Guiju; Harding, Kevin

    2012-11-01

    Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

  10. Minerals Yearbook, volume III, Area Reports—International—Europe and Central Eurasia

    Science.gov (United States)

    Geological Survey, U.S.

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  11. Minerals Yearbook, volume III, Area Reports—International—Asia and the Pacific

    Science.gov (United States)

    Geological Survey, U.S.

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  12. Minerals Yearbook, volume III, Area Reports—International—Africa and the Middle East

    Science.gov (United States)

    ,

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  13. Minerals Yearbook, volume III, Area Reports—International—Latin America and Canada

    Science.gov (United States)

    ,

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  14. FutureTox III: Bridges for Translation

    Science.gov (United States)

    The present document describes key discussion points and outcomes of a Society of Toxicology (SOT) Contemporary Concepts in Toxicology (CCT) Workshop, entitled FutureTox III1,2 that was held in Crystal City, Virginia, November 19-20, 2015. The workshop built on the many lessons l...

  15. Health Activities Project (HAP), Trial Edition III.

    Science.gov (United States)

    Buller, Dave; And Others

    Contained within this Health Activities Project (HAP) trial edition (set III) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into an Overview, Health Background, Materials, Setting Up, and…

  16. Constraining the Statistics of Population III Binaries

    Science.gov (United States)

    Stacy, Athena; Bromm, Volker

    2012-01-01

    We perform a cosmological simulation in order to model the growth and evolution of Population III (Pop III) stellar systems in a range of host minihalo environments. A Pop III multiple system forms in each of the ten minihaloes, and the overall mass function is top-heavy compared to the currently observed initial mass function in the Milky Way. Using a sink particle to represent each growing protostar, we examine the binary characteristics of the multiple systems, resolving orbits on scales as small as 20 AU. We find a binary fraction of approx. 36, with semi-major axes as large as 3000 AU. The distribution of orbital periods is slightly peaked at approx. < 900 yr, while the distribution of mass ratios is relatively flat. Of all sink particles formed within the ten minihaloes, approx. 50 are lost to mergers with larger sinks, and 50 of the remaining sinks are ejected from their star-forming disks. The large binary fraction may have important implications for Pop III evolution and nucleosynthesis, as well as the final fate of the first stars.

  17. Exploring Flipped Classroom Instruction in Calculus III

    Science.gov (United States)

    Wasserman, Nicholas H.; Quint, Christa; Norris, Scott A.; Carr, Thomas

    2017-01-01

    In an undergraduate Calculus III class, we explore the effect of "flipping" the instructional delivery of content on both student performance and student perceptions. Two instructors collaborated to determine daily lecture notes, assigned the same homework problems, and gave identical exams; however, compared to a more traditional…

  18. Mononuclear non-heme iron(III)

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 2. Mononuclear non-heme iron(III) complexes of linear and tripodal tridentate ligands as functional models for catechol dioxygenases: Effect of -alkyl substitution on regioselectivity and reaction rate. Mallayan Palaniandavar Kusalendiran Visvaganesan.

  19. Monte Carlo studies of ZEPLIN III

    CERN Document Server

    Dawson, J; Davidge, D C R; Gillespie, J R; Howard, A S; Jones, W G; Joshi, M; Lebedenko, V N; Sumner, T J; Quenby, J J

    2002-01-01

    A Monte Carlo simulation of a two-phase xenon dark matter detector, ZEPLIN III, has been achieved. Results from the analysis of a simulated data set are presented, showing primary and secondary signal distributions from low energy gamma ray events.

  20. Fe (III) complex of mefloquine hydrochloride: Synthesis ...

    African Journals Online (AJOL)

    As part of the ongoing research for more effective antimalarial drug, Fe (III) complex of mefloquine hydrochloride (antimalarial drug) was synthesized using template method. Mefloquine was tentatively found to have coordinated through the hydroxyl and the two nitrogen atoms in the quinoline and piperidine in the structure, ...

  1. 21 CFR 1308.13 - Schedule III.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Schedule III. 1308.13 Section 1308.13 Food and... opposite it. (b) Stimulants. Unless specifically excepted or unless listed in another schedule, any... a stimulant effect on the central nervous sxstem, including its salts, isomers (whether optical...

  2. Genetics Home Reference: mitochondrial complex III deficiency

    Science.gov (United States)

    ... the energy from food into a form that cells can use. Complex III is one of several complexes that ... in mtDNA. Because egg cells, but not sperm cells, contribute mitochondria to the ... from their mother. These disorders can appear in every generation of ...

  3. Chaos in Kundt Type-III Spacetimes

    International Nuclear Information System (INIS)

    Sakalli, I.; Halilsoy, M.

    2011-01-01

    We consider geodesic motion in a particular Kundt type-III spacetime in which the Einstein-Yang-Mills equations admit the solutions. On a particular surface as constraint, we project the geodesics into the (x, y) plane and treat the problem as a two-dimensional one. Our numerical study shows that chaotic behavior emerges under reasonable conditions. (general)

  4. Gold(III)-Catalyzed Hydration of Phenylacetylene

    Science.gov (United States)

    Leslie, J. Michelle; Tzeel, Benjamin A.

    2016-01-01

    A guided inquiry-based experiment exploring the regioselectivity of the hydration of phenylacetylene is described. The experiment uses an acidic gold(III) catalyst in a benign methanol/water solvent system to introduce students to alkyne chemistry and key principles of green chemistry. The experiment can be easily completed in approximately 2 h,…

  5. DRDC Support to Exercise Cyber Storm III

    Science.gov (United States)

    2011-10-01

    d’intervention fédéraux portant sur les incidents cybernétiques sont encore relativement peu élaborés et insuffisamment développés et un examen des plans examinés...9 2.7 CSIII Ethics Protocol...30 Annex C .. Exercise Cyber Storm III Ethics

  6. Proceedings of the 30. Scientific symposium of industrial toxicology 2010

    International Nuclear Information System (INIS)

    Fargasova, A.; Jambrich, M.; Koprda, V.

    2010-06-01

    Scientific symposium deals with problems of industrial toxicology. The symposium proceeded in the following topics: (I) Relationships between chemical and biota; (II) Radioactivity in the environment, nuclear energy and renewable energy; (III) Accident risk and security industry, civil protection, crisis communication; (IV) Chemical toxicity, and monitoring of the work environment; (V) Chemicals in the environment and health; (VI) Contaminants in food, agricultural and animal products; (VI) Analytical methods in toxicology and environmental science; (VII) Biodegradable renewable raw materials and waste treatment. 27 lectures and 22 posters were presented there. Relevant papers for INIS scope are included.

  7. Occupational risk and toxicology evaluations of industrial water conditioning.

    Science.gov (United States)

    Broussard, G; Bramanti, O; Marchese, F M

    1997-08-01

    This study addresses the chemical and toxicological questions due to the wide use of chemical treatment programmes for industrial cooling water. First, natural problems encountered in cooling tower systems were presented and grouped into three categories: (i) scaling; (ii) corrosion and (iii) biofouling. Chemical solutions adopted in industrial plants were outlined for each one in order to minimize damage and categorized as shut-down, production loss, heat transfer reduction, upsets, etc. Above all, the purpose of the work was to identify the most dangerous chemicals normally used, which means sources of chemical risk for safety workers and their environment; thus, symptoms of exposure, prevention measures and protection tools are also described.

  8. Shaping Industry Interaction Through Secure Information Sharing: Part III: Putting Theory Into Practice

    Science.gov (United States)

    2008-06-01

    of Defence, and seven of the world’s larg- est aerospace and defense (A&D) companies . These parties have come together to address one problem: how to...partner would then be responsible for verifying when employees exit the program or leave the company for whatever reason, and Boeing would not have to...uses business-to-business, or B2B , encryption to exchange encrypted and digitally signed e-mail. This provides en- crypted e-mail on a user-to-user

  9. Effects upon metabolic pathways and energy production by Sb(III and As(III/Sb(III-oxidase gene aioA in Agrobacterium tumefaciens GW4.

    Directory of Open Access Journals (Sweden)

    Jingxin Li

    Full Text Available Agrobacterium tumefaciens GW4 is a heterotrophic arsenite [As(III]/antimonite [Sb(III]-oxidizing strain. The As(III oxidase AioAB is responsible for As(III oxidation in the periplasm and it is also involved in Sb(III oxidation in Agrobacterium tumefaciens 5A. In addition, Sb(III oxidase AnoA and cellular H2O2 are also responsible for Sb(III oxidation in strain GW4. However, the deletion of aioA increased the Sb(III oxidation efficiency in strain GW4. In the present study, we found that the cell mobility to Sb(III, ATP and NADH contents and heat release were also increased by Sb(III and more significantly in the aioA mutant. Proteomics and transcriptional analyses showed that proteins/genes involved in Sb(III oxidation and resistance, stress responses, carbon metabolism, cell mobility, phosphonate and phosphinate metabolism, and amino acid and nucleotide metabolism were induced by Sb(III and were more significantly induced in the aioA mutant. The results suggested that Sb(III oxidation may produce energy. In addition, without periplasmic AioAB, more Sb(III would enter bacterial cells, however, the cytoplasmic AnoA and the oxidative stress response proteins were significantly up-regulated, which may contribute to the increased Sb(III oxidation efficiency. Moreover, the carbon metabolism was also activated to generate more energy against Sb(III stress. The generated energy may be used in Sb transportation, DNA repair, amino acid synthesis, and cell mobility, and may be released in the form of heat.

  10. Industrial College of the Armed Forces Industry Studies 2002: Biotechnology

    National Research Council Canada - National Science Library

    2002-01-01

    The biotechnology industry is critically important to the development of products that will improve health care, agriculture, industrial processes, environmental remediation, and biological defense...

  11. Removal and recovery of heavy metals of residual water industrial

    International Nuclear Information System (INIS)

    Gil P, Edison

    1999-01-01

    On the next work the state of the art about the different methods and technologies for the present removal and recovery of heavy metals for the de-contamination and control of industrial wastewater is presented. Further more, it is introduce a removal alternative for chromium (III) and chromium (V I) using a solid waste material as an adsorbent, obtaining successful results which makes this proposal circumscribe into the clean technology program and residues bag

  12. A comparative study of ion exchange properties of antimony (III) tungstoselenite with those of antimony (III) tungstate and antimony (III) selenite

    International Nuclear Information System (INIS)

    Janardanan, C.; Nair, S.M.K.

    1996-01-01

    A new inorganic ion exchanger, antimony (III) tungstoselenite, has been prepared and characterised. Its exchange capacity and distribution coefficients for various metal ions and the effects of temperature and electrolyte concentrations on ion exchange capacity have been compared with antimony (III) tungstate and antimony (III) selenite. Six binary separations using the exchanger have been carried out. (author). 7 refs., 1 tab

  13. Histopathological effects of Chromium (III Sulfate on Liver and Kidney of Swiss Albino Mice (Mus musculus

    Directory of Open Access Journals (Sweden)

    Iffat Fatima

    2016-08-01

    Full Text Available Chromium (III sulfate has various industrial applications and is widely used in leather industry due to its high tanning properties. Cr (III is required for efficient metabolism of fats and carbohydrates in traces. Various studies have reported that its constant exposure may lead to severe health problems in both animals and humans. In this study, histopathological effect of dietary Cr (III was evaluated on liver and kidneys of rodents. For this purpose, adult Swiss albino mice (n=25 were divided into different treatment and control groups (n=5/group after sufficient acclimatization. After 3 weeks of treatment, animals were sacrificed and observations regarding histopathology of liver and kidneys were made in all treatment groups and compared to control. Microscopy and photography was performed after processing the tissues according to standard protocol of sectioning and staining. Liver cross sections of treated animals showed signs of fibrosis in portal area, and congestion of sinusoid and central vein. Whereas, more pronounced effects of Cr (III toxicity were observed in kidneys. These include mononuclear cell infiltration, necrosis and contraction of glomerulus within Bowman’s capsule. However, No pathological changes were observed in control group. These results support the hypothesis that enhanced level of Cr (III contamination of food can induce both hepatotoxicity and nephrotoxicity. These basic findings prove that currently increasing levels of trivalent chromium in environment are hazardous to living organisms. Therefore, to avoid health risks to both animals and humans, conversion of toxic chromium waste to less toxic compounds is required. Moreover, exposure level through any route should also be minimized.

  14. Industry Valuation Driven Earnings Management

    NARCIS (Netherlands)

    T. Jiao (Tao); G.M.H. Mertens (Gerard); P.G.J. Roosenboom (Peter)

    2007-01-01

    textabstractThis paper investigates whether industry valuation impacts firms’ earnings management decisions. Existing accounting literature assumes that industry valuation has a constant impact on this decision. We argue that a higher industry valuation increases the perceived benefits of earnings

  15. The Politics of Industrial Policy

    DEFF Research Database (Denmark)

    Whitfield, Lindsay; Buur, Lars

    2014-01-01

    Economic transformation is driven by successfully implemented industrial policy, but industrial policy is inherently political. We cannot understand why some governments pursue and implement industrial policy better than others without understanding the politics. This article addresses...

  16. Mapping of wine industry

    Directory of Open Access Journals (Sweden)

    Віліна Пересадько

    2016-10-01

    Full Text Available Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very unevenly; - all existing maps of the industry could be classified as analytical ascertaining inventory type; - the dominant ways of cartographic representation are area method and qualitative background method, sign method and collation maps are rarely used; - basically all the Internet maps have low quality as they are scanned images with poor resolution; - the special feature of maps published lately is lack of geographical basis (except for state borders and coastline. We created wine production and consumption world map «Wine Industry» in the scale of 1:60 000 000 with simple geographical basis (state names, state borders, major rivers, coastline. It was concluded that from the methodological point of view it is incorrect not to show geographical basis on maps of wine industry. Analysis of this map allowed us to identify areas of traditional wine-making, potential wine-making areas and countries which claim to be the world leaders in the field of wine production. We found disbalans between wine production and wine consumption - increasing wine production in South America, China and the United States and increasing wine consumption (mainly due to the import products in countries where the grape is not the primary agricultural product.

  17. PENGEMBANGAN STRATEGIC BUSINESS UNIT PERHUTANI UNIT III JAWA BARAT DAN BANTEN

    Directory of Open Access Journals (Sweden)

    Rurin Wahyu Listriana

    2014-09-01

    Full Text Available ABSTRACTThis study aimed to 1 analyze the innovation and competitiveness ability of Strategic Business Unit (SBU in the KBM (independent business unit industri and 2 formulate alternative policies that can enhance company innovation and competitiveness. The study was conducted at KBM Industri and SBU within the KBM industri. The information and data was obtained through interviews and distributing questionnaires to 10 respondents. Respondents were chosen based on their expertise and or experience. Data processing techniques used the SWOT analysis and Analytic Hierarchy Process (AHP. Results of this study shows that KBM Industri Unit III have the power and the opportunity to expand, increase growth, and achieve maximum progress by improving the quality, developing new products, improving processes and increasing access to wider market. The potential innovation can also be seen from the process-product innovation, knowledge-skills innovation and method-system innovation. In the KBM Industri Unit III, those potential covers the raw materials, process equipment and products. The improvement of company's innovation was influenced by the main factor organization with the value 0,436 and the most influential factors of marketing with a value 0,398, while the ultimate goal is the improvement of the process with the value 0,756. The improvement of the company's innovation strategy is through strategy priority, namely cooperation with other /external parties weighted by 0,703 and optimizing own capabilities of the research or conducting institutions development research weighted by 0,297.Keywords: SBU, KBM Industri, Innovation, AHP, SWOTABSTRAKPenelitian ini bertujuan 1 menganalisis kemampuan inovasi dan daya saing Strategic Business Unit (SBU di Kesatuan Bisnis Mandiri (KBM Industri dan 2 merumuskan kebijakan alternatif yang dapat meningkatkan inovasi dan daya saing perusahaan. Penelitian  dilakukan pada KBM Industri  dan SBU yang ada didalam  KBM

  18. How isotopes benefit industry

    International Nuclear Information System (INIS)

    1967-01-01

    The life of bus engines and the time taken to make beer are not at first sight connected with atomic energy. Yet the first has been considerably lengthened and the second even more considerably shortened in different countries as a result of using nuclear techniques and materials. They are only two examples; there are many others which have improved efficiency in factories, oilfields, chemical plants and other industries. They indicate not only the results of ingenuity but the rewards possible from more widespread use of the new methods. At a symposium on radioisotope tracers in industry and geophysics organized by the Agency and held in Prague during November many reports showed not only what is possible but what is actually being accomplished in a number of industries as a matter of daily routine. The economic benefits were also demonstrated, and although the developments have been mainly in countries already highly industrialized, the potential for new industries in developing countries was clear. Research to improve performance of motorcar, aircraft and tractor engines has been directed at establishing the causes of friction, corrosion and wear. In brewing beer it has been possible to accelerate fermentation. Pollution both of water and air can be reduced and methods of waste disposal improved. Many economies have been effected in oil production. Better quality and lower costs have resulted from work in chemical plants and processes such as glass making, metal refining, plastics and many others. Dams and railways were also mentioned among the great variety of subjects suitable for radioisotope techniques

  19. PACS industry in Korea

    Science.gov (United States)

    Kim, Hee-Joung

    2002-05-01

    PACS industry in Korea has been rapidly growing, since government had supported collaborative PACS project between industry and university hospital. In the beginning, PACS industry had focused on developing peripheral PACS solutions, while the Korea PACS society was being formed. A few companies had started developing and installing domestic large-scale full-PACS system for teaching hospitals. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are now more than 20 domestic PACS companies. They have enough experiences which are capable of installing a truly full-PACS system for large-scale teaching hospitals. As an example, a domestic company had installed more than 40 full-PACS systems within 2-3 years. Enough experiences of full-PACS installation in Korea lead PACS industry to start exporting their full-PACS solutions. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

  20. RUSSIAN INDUSTRY INVESTMENT SITUATION

    Directory of Open Access Journals (Sweden)

    O. V. Pochukaeva

    2011-01-01

    Full Text Available The actual deficiency of investment into Russian industry innovative development increases its technological drag from industries of countries with developed markets. Although the rate of investment into real sectors of Russian economics mid 2000 was higher compared to the previous period, annual investment amounts were much lower than in 1990. At present, highest investment amounts are directed to industry extractive branches and to the commerce. Amounts invested to various economy branches do not correspond to their contribution to the country’sGross Added Product; particularly underinvested are manufacturing industry branches. At present, foreign share in the country economy total investment makes 15–18%. Recently, most interesting for foreigners was investment to machine-building branches with overwhelming part (for example, 90% in 2007–2008 of foreign investment into the machine-building industry being directed to creation of new automobile plants. Today, first place in the list of foreign investors’ preferences in Russia is taken by the machine-tool construction sector.

  1. How isotopes benefit industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-02-15

    The life of bus engines and the time taken to make beer are not at first sight connected with atomic energy. Yet the first has been considerably lengthened and the second even more considerably shortened in different countries as a result of using nuclear techniques and materials. They are only two examples; there are many others which have improved efficiency in factories, oilfields, chemical plants and other industries. They indicate not only the results of ingenuity but the rewards possible from more widespread use of the new methods. At a symposium on radioisotope tracers in industry and geophysics organized by the Agency and held in Prague during November many reports showed not only what is possible but what is actually being accomplished in a number of industries as a matter of daily routine. The economic benefits were also demonstrated, and although the developments have been mainly in countries already highly industrialized, the potential for new industries in developing countries was clear. Research to improve performance of motorcar, aircraft and tractor engines has been directed at establishing the causes of friction, corrosion and wear. In brewing beer it has been possible to accelerate fermentation. Pollution both of water and air can be reduced and methods of waste disposal improved. Many economies have been effected in oil production. Better quality and lower costs have resulted from work in chemical plants and processes such as glass making, metal refining, plastics and many others. Dams and railways were also mentioned among the great variety of subjects suitable for radioisotope techniques

  2. The international electronics industry.

    Science.gov (United States)

    LaDou, J; Rohm, T

    1998-01-01

    High-technology microelectronics has a major presence in countries such as China, India, Indonesia, and Malaysia, now the third-largest manufacturer of semiconductor chips. The migration of European, Japanese, and American companies accommodates regional markets. Low wage rates and limited enforcement of environmental regulations in developing countries also serve as incentives for the dramatic global migration of this industry. The manufacture of microelectonics products is accompanied by a high incidence of occupational illnesses, which may reflect the widespread use of toxic materials. Metals, photoactive chemicals, solvents, acids, and toxic gases are used in a wide variety of combinations and workplace settings. The industry also presents problems of radiation exposure and various occupational stressors, including some unresolved ergonomic issues. The fast-paced changes of the technology underlying this industry, as well as the stringent security precautions, have added to the difficulty of instituting proper health and safety measures. Epidemiologic studies reveal an alarming increase in spontaneous abortions among cleanroom manufacturing workers; no definitive study has yet identified its cause. Other health issues, including occupational cancer, are yet to be studied. The microelectronics industry is a good example of an industry that is exported to many areas of the world before health and safety problems are properly addressed and resolved.

  3. Doctors and pharmaceutical industry.

    Science.gov (United States)

    Beran, Roy G

    2009-09-01

    The pharmaceutical industry is seen as seducing doctors by providing expensive gifts, subsidising travel and underwriting practice expenses in return for those doctors prescribing products that otherwise they would not use. This paints doctors in a very negative light; suggests doctors are available to the highest bidder; implies doctors do not adequately act as independent agents; and that doctors are driven more by self-interest than by patient needs. Similar practices, in other industries, are accepted as normal business behaviour but it is automatically assumed to be improper if the pharmaceutical industry supports doctors. Should the pharmaceutical industry withdraw educational grants then there would be: fewer scientific meetings; reduced attendance at conferences; limited post graduate education; and a depreciated level of maintenance of professional standards. To suggest that doctors prescribe inappropriately in return for largesse maligns their integrity but where there is no scientific reason to choose between different treatments then there can be little argument against selecting the product manufactured by a company that has invested in the doctor and the question arises as to whether this represents bad medicine? This paper will examine what constitutes non-professional conduct in response to inducements by the pharmaceutical industry. It will review: conflict of interest; relationships between doctors and pharma and the consequences for patients; and the need for critical appraisal before automatically decrying this relationship while accepting that there remain those who do not practice ethical medicine.

  4. Recent operational history of the new Sandia Pulsed Reactor III (SPR III)

    International Nuclear Information System (INIS)

    Schmidt, T.R.; Estes, B.F.; Reuscher, J.A.

    1977-01-01

    The Sandia Pulsed Reactor III (SPR III) is a fast-pulse research reactor which was designed and built at Sandia Laboratories and achieved criticality in August 1975. The reactor is now characterized and is in an operational configuration. The core consists of 18 fuel plates (258 kg fuel mass) of fully enriched uranium alloyed with 10 wt.% molybdenum. It is arranged in an annular configuration with an inside diameter of 17.78 cm, an outside diameter of 29.72 cm, and a height of 35.9 cm. The reactor core uses reflectors of copper and aluminum for control and an external bolting arrangement to secure the fuel plates. SPR III and SPR II are operated on an interchangeable basis using the same facility and control system. As of June 1977, SPR III has had over 240 operations with core temperatures up to 541 0 C

  5. Complexes between lanthanide (III) and yttrium (III) picrates and tetra methylene sulfoxide as ligand

    International Nuclear Information System (INIS)

    Silva, M.A.A. da.

    1991-01-01

    The preparation and characterization of addition compounds between lanthanide (III) and yttrium (III) picrates and tetra methylene sulfoxide as ligand were described. The adducts were prepared in the molar relation 1 (salt): 3(ligand) in ethanol. They are microcrystalline with more intense color than those of their respective hydrated salts. At room temperature conditions they are non hygroscopic and do not present perceptible alterations. They became slightly opalescent, when heated between 363 and 423 K. At higher temperatures under several heating ratios, the behavior shown is the same: melting between 439 and 472 K. The characterization of the compounds was made by elemental analysis, electrolytic conductance measurements, X-ray powder patterns, infrared spectroscopy, visible electronic absorption and emission spectra of the neodymium (III) and europium (III), respectively. (author). 116 refs., 17 tabs., 11 figs

  6. Biomimetic oxidation of piperine and piplartine catalyzed by iron(III) and manganese(III) porphyrins.

    Science.gov (United States)

    Schaab, Estela Hanauer; Crotti, Antonio Eduardo Miller; Iamamoto, Yassuko; Kato, Massuo Jorge; Lotufo, Letícia Veras Costa; Lopes, Norberto Peporine

    2010-01-01

    Synthetic metalloporphyrins, in the presence of monooxygen donors, are known to mimetize various reactions of cytochrome P450 enzymes systems in the oxidation of drugs and natural products. The oxidation of piperine and piplartine by iodosylbenzene using iron(III) and manganese(III) porphyrins yielded mono- and dihydroxylated products, respectively. Piplartine showed to be a more reactive substrate towards the catalysts tested. The structures of the oxidation products were proposed based on electrospray ionization tandem mass spectrometry.

  7. Addition compounds of lanthamide (III) and yttrium (III) hexafluorophosphates and N,N - dimethylformamide

    International Nuclear Information System (INIS)

    Braga, L.S.P.

    1983-01-01

    Addition compounds of lanthanide (III) and yttrium (III) hexafluorophosphates and N-N-Dimetylformamide are described to characterize the complexes, elemental analysis, melting ranges, molar conductance measurements, X-ray powder patters infrared and Raman spectra, TG and DTA curves, are studied. Information concerning the decomposition of the adducts through the thermogravimetric curves and the differential thermal analysis curves is obtained. (M.J.C.) [pt

  8. China's rare-earth industry

    Science.gov (United States)

    Tse, Pui-Kwan

    2011-01-01

    Introduction China's dominant position as the producer of over 95 percent of the world output of rare-earth minerals and rapid increases in the consumption of rare earths owing to the emergence of new clean-energy and defense-related technologies, combined with China's decisions to restrict exports of rare earths, have resulted in heightened concerns about the future availability of rare earths. As a result, industrial countries such as Japan, the United States, and countries of the European Union face tighter supplies and higher prices for rare earths. This paper briefly reviews China's rare-earth production, consumption, and reserves and the important policies and regulations regarding the production and trade of rare earths, including recently announced export quotas. The 15 lanthanide elements-lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium (atomic numbers 57-71)-were originally known as the rare earths from their occurrence in oxides mixtures. Recently, some researchers have included two other elements-scandium and yttrium-in their discussion of rare earths. Yttrium (atomic number 39), which lies above lanthanum in transition group III of the periodic table and has a similar 3+ ion with a noble gas core, has both atomic and ionic radii similar in size to those of terbium and dysprosium and is generally found in nature with lanthanides. Scandium (atomic number 21) has a smaller ionic radius than yttrium and the lanthanides, and its chemical behavior is intermediate between that of aluminum and the lanthanides. It is found in nature with the lanthanides and yttrium. Rare earths are used widely in high-technology and clean-energy products because they impart special properties of magnetism, luminescence, and strength. Rare earths are also used in weapon systems to obtain the same properties.

  9. Extraction and separation studies of Ga(III, In(III and Tl(III using the neutral organophosphorous extractant, Cyanex-923

    Directory of Open Access Journals (Sweden)

    P. M. DHADKE

    2003-07-01

    Full Text Available The neutral extractant, Cyanes-923 has been used for the extraction and separation of gallium(III, indium(III and thallium(III from acidic solution. These metal ions were found to be quantitatively extracted with Cyanex-923 in toluene in the pH range 4.5–5.5, 5.0–6.5 and 1.5–3.0, respectively, and from the organic phase they can be stripped with 2.0 mol dm-3 HNO3, 3.0 mol dm-3 HNO3 and 3.0 mol dm-3 HCl, respectively. The effect of pH equilibration period, diluents, diverse ions and stripping agents on the extraction of Ga(III, In(III and Tl(III has been studied. The stroichiometry of the extracted species of these metal ions was determined on the basis of the slope analysis method. The reaction proceed by solvation and the probable extracted species found were [MCl3. 3Cyanex-923] [where M = Ga(III or In(III ] and [HTlCl4. 3Cyanex-923]. Based on these results a sequential procedure for the separation of Ga(III, In(III and Tl(III from each other was developed.

  10. Petrochemical industry drivers

    International Nuclear Information System (INIS)

    Sedriks, W.

    1995-01-01

    Extensive analyses of profit-ability and pricing over the years have shown that the trends seen in the petrochemical industry have two dominant drivers, namely, industry experience curves (reflecting continuous process improvement and cost savings) and profitability cycles. Any outlook for the future must examine both of these facets. The author's algorithm for price projections has two primary terms: a cost-related one and a supply/demand-related one. Both are strong functions of experience curves; the latter is also a prime function of cyclicality. At SRI International. To arrive at medium-term quantitative projections, SRI typically creates a consistent base-case scenario that more or less mirrors the past but also incorporates observed directional changes. In this article the author examines in detail how these scenarios are used for projection. He describes experience curves, ethylene/gross domestic product (GDP) penetration levels, industry structure, and cyclicality as they apply to ethylene prices

  11. CSR in Industrial Clusters

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Pillay, Renginee G.

    2012-01-01

    Purpose – The paper seeks to review the literature on CSR in industrial clusters in developing countries, identifying the main strengths, weaknesses, and gaps in this literature, pointing to future research directions and policy implications in the area of CSR and industrial cluster development....... Design/methodology/approach – A literature review is conducted of both academic and policy-oriented writings that contain the keywords “industrial clusters” and “developing countries” in combination with one or more of the following terms: corporate social responsibility, environmental management, labor...... standards, child labor, climate change, social upgrading, and environmental upgrading. The authors examine the key themes in this literature, identify the main gaps, and point to areas where future work in this area could usefully be undertaken. Feedback has been sought from some of the leading authors...

  12. Computerized industrial tomography

    International Nuclear Information System (INIS)

    Ashraf, M.M.

    1999-01-01

    Computerized Tomographic (CT) has been used for a number of applications in the field of medicine and industry. For the last couple of years, the technique has been applied for the material characterization and detection of defects and flaws inside the industrial components of nuclear, aerospace and missile industries. A CT scanner of first generation was developed at the institute. The scanner has been used to demonstrate couple of applications of CT in the field of non destructive testing of materials. The data acquired by placing the test objects at various angles and scanning the object through a source detector assembly has been processed on a Pentium computer for image reconstruction using a filtered back projection method. The technique has been developed which can be modified and improved to study various other applications in materials science and a modern computerized tomographic facility can be established. (author)

  13. Nuclear power industry

    International Nuclear Information System (INIS)

    1999-01-01

    This press dossier presented in Shanghai (China) in April 1999, describes first the activities of the Framatome group in the people's republic of China with a short presentation of the Daya Bay power plant and of the future Ling Ao project, and with a description of the technological cooperation with China in the nuclear domain (technology transfers, nuclear fuels) and in other industrial domains (mechanics, oil and gas, connectors, food and agriculture, paper industry etc..). The general activities of the Framatome group in the domain of energy (nuclear realizations in France, EPR project, export activities, nuclear services, nuclear fuels, nuclear equipments, industrial equipments) and of connectors engineering are presented in a second and third part with the 1998 performances. (J.S.)

  14. Industrial nuclear property

    International Nuclear Information System (INIS)

    Lepetre, M.

    1976-01-01

    The first requests for patents for the use of nuclear power filed in France in 1939. This paper reviews the regulations on industrial nuclear property in various countries. The patenting system in several socialist countries is characterized by the fact that inventions on the production and use of radioactive materials may not be patented. This equally applies in India. In the United States, this type of invention may be patented except for those involving military uses and which must be notified to the federal authorities. In France, all industrial nuclear property is grouped under the same body, Brevatome, created in 1958, which enables the allocation of rights to be negotiated between the different interested parties, the Atomic Energy Commission (CEA), Electricite de France (EDF) and private industry. Under the Euratom Treaty, all inventions, even those governed by secrecy in Member countries, must be communicated to the Commission of the European Communities. (NEA) [fr

  15. The international petrochemical industry

    International Nuclear Information System (INIS)

    Chapman, K.

    1991-01-01

    The petrochemical industry occupies a crucial place in economic, strategic and political terms in the twentieth century. The author explains its growth and international distribution from the 1920s tot he present, relating the particular experience of petrochemicals to the processes that have shaped the long-term evolution of industry in general. The geographical coverage of this book extends from the regional to international scale, and its historical scope embraces one hundred years from the laboratory origins of polymer science and petrochemistry to the massive operations of modern industry. It represents the result of twenty years of research, and reflects the author's privileged access to company sources in both the U.S. and Europe

  16. Industrial demonstration trials

    International Nuclear Information System (INIS)

    Gelee, M.; Fabre, C.; Villepoix, R. de; Fra, J.; Le Foulgoc, L.; Morel, Y.; Querite, P.; Roques, R.

    1975-01-01

    Prototypes of the plant components, meeting the specifications set by the process and built by industrial firms in collaboration with the supervisor and the C.E.A., are subjected to trial runs on the UF 6 test bench of the Pierrelatte testing zone. These items of equipment (diffuser, compressor, exchanger) are placed in an industrial operation context very similar to that of an enrichment plant. Their performance is measured within a broad region around the working point and their reliability observed over periods up to several tens of thousands of hours. Between 1969 and 1973 six industrial demonstration test benches have been built, marking the stages in the technical preparation of the 1973 file on the basis of which the decision of building was taken by Eurodif [fr

  17. Competing For industry Resources

    International Nuclear Information System (INIS)

    Arnstad, Marit

    1998-01-01

    This presentation by Norway's Minister of Petroleum and Energy describes (1) Norway in the energy picture, (2) oil market developments, (3) the establishment of an energy policy and (4) the investment level of the Norwegian petroleum activities. Value creation from Norwegian petroleum resources is directly connected with the commercial companies' participation in the activities. Thus, it has been a main challenge for Norway to establish a balanced petroleum policy and a legal framework. Presumably Norway will remain a prospective and attractive petroleum province for a long time. Over the years, Norway has developed three very competent and competitive national oil companies and a significant national supply industry. This industry is highly competitive internationally. Many new petroleum provinces are opening up for foreign investors and energy consumption of the world is expected to increase significantly the next 20 - 30 years. This implies increased demand for the products, but also strong competition for industry resources

  18. Industrial coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

  19. The Asian petrochemical industry

    International Nuclear Information System (INIS)

    Selwa, Christopher.

    1996-03-01

    The Asian Petrochemical Industry brings you up to date with the latest developments in this dynamic region and covers all the key issues, giving detailed analysis and comment on: the general economic outlook; demand and production trends for basic petrochemicals and specialities in individual countries; political stability and how with affects growth and investment opportunities; security of supply; the import of petrochemicals and the aim of the region to become a net exporter by 2000; capacity increases - the relative merits of new plant construction versus expanding existing plants; the financing of petrochemical projects; the use of appropriate projects; the use of appropriate technology and patent provision in the Gatt treaty; increasing environmental concerns and the 'responsible care' initiative. The Asian Petrochemical Industry presents an overview of each Asian player in the petrochemical and associated industries, comparing and contrasting the countries within the region. (Author)

  20. CEA and mining industry

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The French atomic energy commission (CEA) is involved in the mining industry in several ways: - in the front-end of the nuclear industry through its daughter companies and participations in the exploration and exploitation of uranium ores, but also of gold and alloy metals with a 26% participation in Eramet company, the world leader of manganese and nickel. This activity is the main occupation of Cogema daughter company, via the Areva holding; - in the back-end of the nuclear fuel cycle with the delicate problem of the management of radioactive wastes; - in parallel with the nuclear industry through an important activity in semiconductor materials (FCI and SMTElectronics); - and finally through various research works on several mineral compounds. This article focusses on the fuel cycle aspects of the CEA activities and concludes with the research works carried out today on thermonuclear fusion. (J.S.)

  1. Industrial experience with titanium

    International Nuclear Information System (INIS)

    Ikeda, B.M.; Shoesmith, D.W.

    1997-09-01

    Titanium is a reference material for the construction of waste containers in the Canadian Nuclear Fuel Waste Management Program. It has been in industrial service for over 30 a, often in severe corrosion environments, but it is still considered a relatively exotic material with limited operating history. This has arisen because of the aerospace applications of this material and the misconception that the high strength-to-weight ratio dominates the choice of this material. In fact, the advantage of titanium lies in its high reliability and excellent corrosion resistance. It has a proven record in seawater heat exchanger service and a demonstrated excellent reliability even in polluted water. For many reasons it is the technically correct choice of material for marine applications. In this report we review the industrial service history of titanium, particularly in hot saline environments, and demonstrate that it is a viable waste container material, based upon this industrial service history and operating experience. (author)

  2. Servitization in industry

    CERN Document Server

    2014-01-01

    Presenting both a comprehensive collection of sectorial studies of servitization in manufacturing industries, on the one hand, and research investigating the necessity to adapt various processes and departments of manufacturing companies to servitized business models, on the other, ‘Servitization in Industry’ informs the scientific and managerial servitization debate with recent data regarding industrial servitization models. This book provides detailed analyses of manufacturing sectors that elucidate the options and barriers related to servitization from a sector-based perspective. This sector-based approach allows for an individual and in-depth examination of recent relationships among manufacturers and their clients by explaining leads and lags in servitization. Serving to maximize reader insight into the specific characteristics of different sectors with their barriers and potentials, the book presents frameworks for successful servitization of the core sectors in European manufacturing industries whi...

  3. Applying industrial symbiosis to chemical industry: A literature review

    Science.gov (United States)

    Cui, Hua; Liu, Changhao

    2017-08-01

    Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

  4. Gd(III)-nanodiamond conjugates for MRI contrast enhancement

    Science.gov (United States)

    Manus, Lisa M.; Mastarone, Daniel J.; Waters, Emily A.; Zhang, Xue-Qing; Schultz-Sikma, Elise A.; MacRenaris, Keith W.; Ho, Dean

    2010-01-01

    A Gd(III)-nanodiamond conjugate [Gd(III)-ND] was prepared and characterized, enabling detection of nanodiamonds by MR imaging. The Gd(III)-ND particles significantly reduced the T1 of water protons with a per-Gd(III) relaxivity of 58.82 ± 1.18 mM−1s−1 at 1.5 Tesla (60 MHz). This represents a tenfold increase compared to the monomer Gd(III) complex (r1 = 5.42 ± 0.20 mM−1s−1) and is among the highest per-Gd(III) relaxivities reported. PMID:20038088

  5. Emulsified industrial oils recycling

    Energy Technology Data Exchange (ETDEWEB)

    Gabris, T.

    1982-04-01

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  6. Corrosion in power industry

    International Nuclear Information System (INIS)

    Ventakeshwarlu, K.S.

    1979-01-01

    A brief account of the problem areas encountered as a result of corrosion in the electrical power industry including nuclear power industry is given and some of the measures contemplated and/or implemented to control corrosion are outlined. The corrosion problems in the steam generators and cladding tubes of the nuclear power plant have an added dimension of radioactivation which leads to contamination and radiation field. Importance of monitoring water quality and controlling water chemistry by addition of chemicals is emphasised. (M.G.B.)

  7. Industry and energy

    International Nuclear Information System (INIS)

    Birules y Bertran, A.M.; Folgado Blanco, J.

    2002-01-01

    This document is the provisional version of the summary of the debates of the 2433. session of the European Union Council about various topics relative to the industry and the energy. The energy-related topics that have been debated concern: the government helps in coal industry, the internal electricity and gas market, the trans-European energy networks, the bio-fuels in transportation systems, the energy charter, the pluri-annual energy program, and the green book on the security of energy supplies. (J.S.)

  8. Francisco Mattos (ed.), industrial

    OpenAIRE

    Gunn, Joshua

    2006-01-01

    An episode of the the U.S. Public Broadcasting Service documentary series P.O.V. titled ‘‘Baby, It’s You’’ (2 June, 1988) captures a glimmer of what is left of that early eighties music-art scene known as ‘‘industrial.’’ In the wake of a newscast detailing new information about the Columbine High School massacre in April, 1999 – a crime initially linked by the press to the ‘‘gothic’’ and «industrial» music consumed by the murderers – the narrator’s voice (Anne Makepeace) invited me to carry t...

  9. The renewable chemicals industry

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Rass-Hansen, J.; Marsden, Charlotte Clare

    2008-01-01

    per kilogram of desired product to illustrate in which processes the use of renewable resources lead to the most substantial reduction of CO2 emissions. The steps towards a renewable chemicals industry will most likely involve intimate integration of biocatalytic and conventional catalytic processes......The possibilities for establishing a renewable chemicals industry featuring renewable resources as the dominant feedstock rather than fossil resources are discussed in this Concept. Such use of biomass can potentially be interesting from both an economical and ecological perspective. Simple...

  10. Seismic changes industry

    International Nuclear Information System (INIS)

    Taylor, G.

    1992-01-01

    This paper discusses the growth in the seismic industry as a result of the recent increases in the foreign market. With the decline of communism and the opening of Latin America to exploration, seismic teams have moved out into these areas in support of the oil and gas industry. The paper goes on to discuss the improved technology available for seismic resolution and the subsequent use of computers to field-proof the data while the seismic team is still on-site. It also discusses the effects of new computer technology on reducing the amount of support staff that is required to both conduct and interpret seismic information

  11. Industrial numerical analysis

    International Nuclear Information System (INIS)

    McKee, S.; Elliott, C.M.

    1986-01-01

    The applications of mathematics to industrial problems involves the formulation of problems which are amenable to mathematical investigation, mathematical modelling, the solution of the mathematical problem and the inter-pretation of the results. There are 12 chapters describing industrial problems where mathematics and numerical analysis can be applied. These range from the numerical assessment of the flatness of engineering surfaces and plates, the design of chain links, control problems in tidal power generation and low thrust satellite trajectory optimization to mathematical models in welding. One chapter, on the ageing of stainless steels, is indexed separately. (UK)

  12. Benchmarking Danish Industries

    DEFF Research Database (Denmark)

    Gammelgaard, Britta; Bentzen, Eric; Aagaard Andreassen, Mette

    2003-01-01

    compatible survey. The International Manufacturing Strategy Survey (IMSS) doesbring up the question of supply chain management, but unfortunately, we did not have access to thedatabase. Data from the members of the SCOR-model, in the form of benchmarked performance data,may exist, but are nonetheless...... not public. The survey is a cooperative project "Benchmarking DanishIndustries" with CIP/Aalborg University, the Danish Technological University, the DanishTechnological Institute and Copenhagen Business School as consortia partners. The project has beenfunded by the Danish Agency for Trade and Industry...

  13. Digitization in Maritime Industry

    DEFF Research Database (Denmark)

    Constantiou, Ioanna; Shollo, Arisa; Kreiner, Kristian

    2017-01-01

    Digitization in the maritime industry is expected to transform businesses. The recently introduced mobile technologies in inter-organizational processes is an example of digitization in an industry which moves very slowly towards digital transformation. We focus on the influence of mobile...... technologies on control practices in inter-organizational processes related to coping with an engine failure. We collected qualitative data from in depth interviews with representatives of the involved parties. We identify organizational and behavioural challenges hindering information sharing during problem...... technologies increase information sharing and thus the efficiency of inter-organizational processes when coping with an engine failure....

  14. The Spanish gas industry

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The spanish gas industry has become one of the major actors in the gas sector of the European Economic Community. This paper pictures the spanish gas industry on the basis of a study by Sedigas, the spanish member of the International Gas Union (IGU). The main subjects described are structure of gas companies, natural gas supply, transport and storage, natural gas distribution networks, statistical data on natural gas consumption, manufactured gas and Liquefied Petroleum Gases (LPG) production-consumption in Spain. 7 figs., 10 tabs

  15. Industrial applications of radiations

    International Nuclear Information System (INIS)

    Gallien, C.L.

    1988-01-01

    Radiation processing refers to the use of ionizing radiation to initiate chemical or biological changes in various materials as a substitute for conventional thermal or chemical processes. The method was inroduced in the industrial field 30 years ago and is now being widely used for numerous applications, among which industrial radiography, polymer modification, sterilization or decontamination, and food preservation. Both electron beam accelerators and gamma sources can be used, depending mainly of the amount of radiation and the penetration required. Radiation processing presents an increasing economical importance; in 1986 the market volume of ionized products ranged 3 billion $ [fr

  16. Industrial coal survey

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-25

    UK industrial coal sales were down 400,000t to 7.1mt in 1991. This was largely due to fall in cement purchases as the construction industry was badly hit in the recession. Increased competition from petroleum coke also had an effect. A brief roundup is presented of sales to the UK's major coal buyers: Alcan, ICI, Blue Circle, Castle Cement, Rugby Cement, British Steel, UK Paper, Courtaulds, Unilever, AHS Emstar, Tate Lyle, and British Sugar. 1 tab.

  17. Doublet III beamline: as-built

    International Nuclear Information System (INIS)

    Harder, C.R.; Holland, M.M.; Parker, J.W.; Gunn, J.; Resnick, L.

    1980-03-01

    In order to fully exploit Doublet III capabilities and to study new plasma physics regimes, a Neutral Beam Injector System has been constructed. Initially, a two beamline system will supply 7 MW of heat to the plasma. The system is currently being expanded to inject approx. 20 MW of power (6 beamlines). Each beamline is equipped with two Lawrence Berkeley Laboratory type rectangular ion sources with 10 cm x 40 cm extraction grids. These sources will accelerate hydrogen ions to 80 keV, with extracted beam currents in excess of 80 A per source expected. The first completed source is currently being tested and conditioned on the High Voltage Test Stand at Lawrence Livermore Laboratory. This paper pictorially reviews the as-built Doublet III neutral beamline with emphasis on component relation and configuration relative to spatial and source imposed design constraints

  18. Correction of a severe Class III malocclusion.

    Science.gov (United States)

    Arslan, Seher Gündüz; Kama, Jalan Devecioglu; Baran, Sedat

    2004-08-01

    The success of early orthopedic treatment in patients with Class III anomalies depends on facial skeletal development and type of treatment. This case report describes the treatment of a 12.6-year-old girl who had a severe Class III malocclusion with a 6-mm anterior crossbite, a deep overbite, a narrow maxilla, and unerupted maxillary canines. The treatment plan included rapid palatal expansion to expand the maxilla, reverse headgear to correct the maxillary retrognathia, a removable anterior inclined bite plane to correct the anterior crossbite and the deep overbite, and fixed edgewise appliances to align the teeth. One canine was brought into alignment, but the other was placed in occlusion in its transposed position. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing.

  19. Contemporary solutions for managing Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Nathamuni Rengarajan Krishnaswamy

    2015-01-01

    Full Text Available Although patients with Class III malocclusions constitute a small percentage of the average orthodontic practice, providing them with optimal treatment is a daunting task. The treatment approach is dependent upon the growth status of the individual and the severity of the skeletal dysplasia. For growing individuals, facemask therapy to protract the maxilla is ineffective because of its dependence on dental anchorage to bring forth skeletal correction. Orthodontic camouflage in nongrowing mild skeletal Class III individuals is met with limited success because of the anatomical boundaries and the conventional biomechanics. Orthognathic surgery to correct the maxillomandibular relations is time-consuming, and the facial esthetics is compromised during the orthodontic decompensation period. Contemporary solutions to overcome these limitations are now viable with the use of temporary anchorage devices and by performing surgery prior to orthodontic decompensation. The rationale for employing these contemporary approaches will be discussed in this study with illustrative cases.

  20. Rape embryogenesis. III. Embryo development in time

    Directory of Open Access Journals (Sweden)

    Teresa Tykarska

    2014-01-01

    Full Text Available It was found that the growth curve of the rape embryo axis is of triple sigmoid type. Embryo growth occurs in 3 phases corresponding to 3 different periods of development. Phase I includes growth of the apical cell up to it's division into two layers of octants. Phase II comprises the increase of the spherical proembryo to the change of its symmetry from radial to bilateral. Phase III includes, growth of the embryo from the heart stage up to the end of embryogenesis. In each phase the relative growth rate increases drastically and then diminishes. The differences in growth intensity during the same phase are several-fold. The growth intensity maximum of the embryo axis occurs in phase II. The phasic growth intensity maxima occur: in phase I during apical cell elongation, :before its division, and in phases II and III in the periods of cell division ;growth in globular and torpedo-shaped -shaped embryos.

  1. Irradiation test of FPGA for BES III

    International Nuclear Information System (INIS)

    Chen Yixin; Liang Hao; Xue Jundong; Liu Baoying; Liu Qiang; Yu Xiaoqi; Zhou Yongzhao; Hou Long

    2005-01-01

    The irradiation effect of FPGA, applied in Front-end Electronics for experiments of High-Energy Physics, is a serious problem. The performance of FPGA, used in the front-end card of Muon Counters of BES III project, needs to be evaluated under irradiation. SEUs on Altera ACEX 1K FPGA, observed in the experiment under the irradiation of γ ray, 14 and 2.5 MeV neutrons, was investigated. The authors calculated involved cross-section and provided reasonable analysis and evaluation for the result of the experiment. The conclusion about feasibility of applying ACEX 1K FPGA in the front-end card of the readout system of Muon Counters for BES III was given. (authors)

  2. A physically-based constitutive model for SA508-III steel: Modeling and experimental verification

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Dingqian [National Die & Mold CAD Engineering Research Center, Shanghai Jiao Tong University, 1954 Huashan Rd., Shanghai 200030 (China); Chen, Fei, E-mail: feechn@gmail.com [National Die & Mold CAD Engineering Research Center, Shanghai Jiao Tong University, 1954 Huashan Rd., Shanghai 200030 (China); Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Cui, Zhenshan, E-mail: cuizs@sjtu.edu.cn [National Die & Mold CAD Engineering Research Center, Shanghai Jiao Tong University, 1954 Huashan Rd., Shanghai 200030 (China)

    2015-05-14

    Due to its good toughness and high weldability, SA508-III steel has been widely used in the components manufacturing of reactor pressure vessels (RPV) and steam generators (SG). In this study, the hot deformation behaviors of SA508-III steel are investigated by isothermal hot compression tests with forming temperature of (950–1250)°C and strain rate of (0.001–0.1)s{sup −1}, and the corresponding flow stress curves are obtained. According to the experimental results, quantitative analysis of work hardening and dynamic softening behaviors is presented. The critical stress and critical strain for initiation of dynamic recrystallization are calculated by setting the second derivative of the third order polynomial. Based on the classical stress–dislocation relation and the kinetics of dynamic recrystallization, a two-stage constitutive model is developed to predict the flow stress of SA508-III steel. Comparisons between the predicted and measured flow stress indicate that the established physically-based constitutive model can accurately characterize the hot deformations for the steel. Furthermore, a successful numerical simulation of the industrial upsetting process is carried out by implementing the developed constitutive model into a commercial software, which evidences that the physically-based constitutive model is practical and promising to promote industrial forging process for nuclear components.

  3. Banana Peel: A Green and Economical Sorbent for Cr(III Removal

    Directory of Open Access Journals (Sweden)

    Jamil R. Memon

    2008-06-01

    Full Text Available Banana peel, a common fruit waste has been investigated to remove and preconcentrate Cr(III from industrial wastewater. It was characterized by FT-IR spectroscopy. The parameters pH, contact time, initial metal ion concentration and temperature were investigated and the maximum sorption was found to be 95%. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 4. The retained species were eluted using 5mL of 2 M HNO3. The mechanism for the binding of Cr(III on the banana peel surface was also studied in detail. The Langmuir and Dubinin-Radushkevich (D-R isotherms were used to describe the partitioning behavior for the system at different temperatures. Kinetic and thermodynamic measurements of the banana peel for chromium ions were also studied. The method was applied for the removal and preconcentration of Cr(III from industrial wastewater.

  4. A physically-based constitutive model for SA508-III steel: Modeling and experimental verification

    International Nuclear Information System (INIS)

    Dong, Dingqian; Chen, Fei; Cui, Zhenshan

    2015-01-01

    Due to its good toughness and high weldability, SA508-III steel has been widely used in the components manufacturing of reactor pressure vessels (RPV) and steam generators (SG). In this study, the hot deformation behaviors of SA508-III steel are investigated by isothermal hot compression tests with forming temperature of (950–1250)°C and strain rate of (0.001–0.1)s −1 , and the corresponding flow stress curves are obtained. According to the experimental results, quantitative analysis of work hardening and dynamic softening behaviors is presented. The critical stress and critical strain for initiation of dynamic recrystallization are calculated by setting the second derivative of the third order polynomial. Based on the classical stress–dislocation relation and the kinetics of dynamic recrystallization, a two-stage constitutive model is developed to predict the flow stress of SA508-III steel. Comparisons between the predicted and measured flow stress indicate that the established physically-based constitutive model can accurately characterize the hot deformations for the steel. Furthermore, a successful numerical simulation of the industrial upsetting process is carried out by implementing the developed constitutive model into a commercial software, which evidences that the physically-based constitutive model is practical and promising to promote industrial forging process for nuclear components

  5. Organic coolant for ARIES-III

    International Nuclear Information System (INIS)

    Sze, D.K.; Sviatoslavsky, I.; Sawan, M.; Gierszewski, P.; Hollies, R.; Sharafat, S.; Herring, S.

    1991-04-01

    ARIES-III is a D-He 3 reactor design study. It is found that the organic coolant is well suited for the D-He 3 reactor. This paper discusses the unique features of the D-He 3 reactor, and the reason that the organic coolant is compatible with those features. The problems associated with the organic coolant are also discussed. 8 refs., 2 figs., 6 tabs

  6. Engineering design of ARIES-III

    International Nuclear Information System (INIS)

    Sze, D.K.; Wong, C.; Cheng, E.

    1993-07-01

    An efficient organic cooled low activation ferritic steel first wall and shield has been designed for the D- 3 He power reactor ARIES-III. The design allows removal of the large surface heat load without exceeding temperature and stress design limits. The structure is expected to last for the whole reactor life. The major concerns regarding using the organic coolant in fusion reactors have been greatly alleviated

  7. Doublet III: status and future plans

    International Nuclear Information System (INIS)

    Rawls, J.M.

    1980-04-01

    A synopsis is presented of the experimental results from the ohmic heating phase of Doublet III, with emphasis on the production of good target plasmas for the upcoming neutral beam injection phase. The program plan for the device over the life of the US-Japan cooperative program is discussed, as is the status of the preliminary investigation into replacing the present vacuum vessel by one better suited for ETF simulation

  8. Neuroscience in Nazi Europe Part III

    DEFF Research Database (Denmark)

    Zeidman, Lawrence A; Kondziella, Daniel

    2012-01-01

    In Part I, neuroscience collaborators with the Nazis were discussed, and in Part II, neuroscience resistors were discussed. In Part III, we discuss the tragedy regarding european neuroscientists who became victims of the Nazi onslaught on “non-Aryan” doctors. Some of these unfortunate...... of neuroscience, we pay homage and do not allow humanity to forget, lest this dark period in history ever repeat itself....

  9. Objectives and methodology of BIOBADASER phase iii.

    Science.gov (United States)

    Sanchez-Piedra, Carlos; Hernández Miguel, M Victoria; Manero, Javier; Roselló, Rosa; Sánchez-Costa, Jesús Tomás; Rodríguez-Lozano, Carlos; Campos, Cristina; Cuende, Eduardo; Fernández-Lopez, Jesús Carlos; Bustabad, Sagrario; Martín Domenech, Raquel; Pérez-Pampín, Eva; Del Pino-Montes, Javier; Millan-Arcineas, Ana Milena; Díaz-González, Federico; Gómez-Reino, Juan Jesús

    2017-09-18

    Describe the objectives, methods and results of the first year of the new version of the Spanish registry of adverse events involving biological therapies and synthetic drugs with an identifiable target in rheumatic diseases (BIOBADASER III). Multicenter prospective registry of patients with rheumatic inflammatory diseases being treated with biological drugs or synthetic drugs with an identifiable target in rheumatology departments in Spain. The main objective of BIOBADASER Phase III is the registry and analysis of adverse events; moreover, a secondary objective was added consisting of assessing the effectiveness by means of the registry of activity indexes. Patients in the registry are evaluated at least once every year and whenever they experience an adverse event or a change in treatment. The collection of data for phase iii began on 17 December 2015. During the first year, 35 centers participated. The number of patients included in this new phase in December 2016 was 2,664. The mean age was 53.7 years and the median duration of treatment was 8.1 years. In all, 40.4% of the patients were diagnosed with rheumatoid arthritis. The most frequent adverse events were infections and infestations. BIOBADASER Phase III has been launched to adapt to a changing pharmacological environment, with the introduction of biosimilars and small molecules in the treatment of rheumatic diseases. This new stage is adapted to the changes in the reporting of adverse events and now includes information related to activity scores. Copyright © 2017 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.

  10. Can Basel III Prevent Future Financial Crisis?

    OpenAIRE

    Madzova, Violeta

    2012-01-01

    The financial sector is crucial for the smooth functioning of the economy. For this reason, the authorities use financial regulation as a means to ensure the stability of the banking system and to correct those ‘market failures’ that would otherwise threaten the solidity of financial institutions. Recently introduced Basel III on the new bank capital and liquidity standards, (that is going to be implemented gradually starting from 2013 till 2019) is changing the way that banks address the...

  11. Doublet III construction and engineering test

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Progress during FY-78 on the construction and operation of the Doublet III is reported. Detailed discussions about the installation and testing of various components and subsystems, including the B-coil, E-coil, F-coils and support structure, vacuum vessel, vacuum pumping system, limiter, thermal insulation blanket, control system, B-coil power system, E-coil power system, F-coil power system, and motor-generator, are presented. A brief review of the engineering test operation is given

  12. Insight into the Extraction Mechanism of Americium(III) over Europium(III) with Pyridylpyrazole: A Relativistic Quantum Chemistry Study.

    Science.gov (United States)

    Kong, Xiang-He; Wu, Qun-Yan; Wang, Cong-Zhi; Lan, Jian-Hui; Chai, Zhi-Fang; Nie, Chang-Ming; Shi, Wei-Qun

    2018-05-10

    Separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) is one of the most important steps in spent nuclear fuel reprocessing. However, it is very difficult and challenging to separate them due to their similar chemical properties. Recently the pyridylpyrazole ligand (PypzH) has been identified to show good separation ability toward Am(III) over Eu(III). In this work, to explore the Am(III)/Eu(III) separation mechanism of PypzH at the molecular level, the geometrical structures, bonding nature, and thermodynamic behaviors of the Am(III) and Eu(III) complexes with PypzH ligands modified by alkyl chains (Cn-PypzH, n = 2, 4, 8) have been systematically investigated using scalar relativistic density functional theory (DFT). According to the NBO (natural bonding orbital) and QTAIM (quantum theory of atoms in molecules) analyses, the M-N bonds exhibit a certain degree of covalent character, and more covalency appears in Am-N bonds compared to Eu-N bonds. Thermodynamic analyses suggest that the 1:1 extraction reaction, [M(NO 3 )(H 2 O) 6 ] 2+ + PypzH + 2NO 3 - → M(PypzH)(NO 3 ) 3 (H 2 O) + 5H 2 O, is the most suitable for Am(III)/Eu(III) separation. Furthermore, the extraction ability and the Am(III)/Eu(III) selectivity of the ligand PypzH is indeed enhanced by adding alkyl-substituted chains in agreement with experimental observations. Besides this, the nitrogen atom of pyrazole ring plays a more significant role in the extraction reactions related to Am(III)/Eu(III) separation compared to that of pyridine ring. This work could identify the mechanism of the Am(III)/Eu(III) selectivity of the ligand PypzH and provide valuable theoretical information for achieving an efficient Am(III)/Eu(III) separation process for spent nuclear fuel reprocessing.

  13. Evolution of Class III treatment in orthodontics.

    Science.gov (United States)

    Ngan, Peter; Moon, Won

    2015-07-01

    Angle, Tweed, and Moyers classified Class III malocclusions into 3 types: pseudo, dentoalveolar, and skeletal. Clinicians have been trying to identify the best timing to intercept a Class III malocclusion that develops as early as the deciduous dentition. With microimplants as skeletal anchorage, orthopedic growth modification became more effective, and it also increased the scope of camouflage orthodontic treatment for patients who were not eligible for orthognathic surgery. However, orthodontic treatment combined with orthognathic surgery remains the only option for patients with a severe skeletal Class III malocclusion or a craniofacial anomaly. Distraction osteogenesis can now be performed intraorally at an earlier age. The surgery-first approach can minimize the length of time that the malocclusion needs to worsen before orthognathic surgery. Finally, the use of computed tomography scans for 3-dimensional diagnosis and treatment planning together with advances in imaging technology can improve the accuracy of surgical movements and the esthetic outcomes for these patients. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  14. Industrial Engineering Education in India

    Science.gov (United States)

    Bajpai, Shrish; Akhtar, Shagil

    2017-01-01

    The industrial revolution can be termed as the catalyst of human growth. The establishment of various industries has been detrimental to the meteoric rise of any commodity, product or service across the world. Industries fuel the economy of countries and form the main constituent of their GDP. Industries not only generate the production of the…

  15. Design research and industrial applicability

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1997-01-01

    Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

  16. Water Pollution Control Industry

    Science.gov (United States)

    Environmental Science and Technology, 1974

    1974-01-01

    A special report on the state of the water pollution control industry reveals that due to forthcoming federal requirements, sales and the backlogs should increase; problems may ensue because of shortages of materials and inflation. Included are reports from various individual companies. (MLB)

  17. Mineral oil industry

    NARCIS (Netherlands)

    Brasser, L.J.; Suess, M.J.; Grefen, K.; Reinisch, D.W.

    1985-01-01

    In this chapter a general picture is presented of the air pollution aspects in the mineral oil industry. The complete field is covered, starting from drilling operations and the well head up to the delivery of the products to the consumer. A large field of activities as is given by the mineral oil

  18. RETRAINING BY PRIVATE INDUSTRY.

    Science.gov (United States)

    HOOS, IDA R.

    SEVERAL SAN FRANCISCO BAY AREA COMPANIES WERE EXAMINED FOR SPECIFIC PROGRAMS FOR DISPLACED EMPLOYEES. ARMOUR AND COMPANY SOUGHT TO GUIDE DISPLACED EMPLOYEES TO CLASSES OR COURSES OF ACTION OUTSIDE ITS OWN SPHERE OF OPERATION. LOCKHEED HAS PROVIDED UNUSUALLY WELL FOR UPGRADING AND RETRAINING, MAINLY BECAUSE OF INDUSTRY FLUCTUATIONS AND RAPID…

  19. Oklahoma forest industries, 1978

    Science.gov (United States)

    Victor A. Rudis; J. Greg Jones

    1978-01-01

    Oklahoma supplied 73 million cu ft of roundwood to forest industries in 1978, an increase of 13 percent since 1972, and 35 percent since 1975 (fig. 1). Pine made up four-fifths of the total. Sawlogs and pulpwood were the major products, accounting for 81 percent of the roundwood produced. Veneer logs accounted for 8 percent and the remainder was mostly posts.

  20. Organizational Culture and Industrialization

    DEFF Research Database (Denmark)

    Kragh, Simon Ulrik

    Drawing on a revised version ofHofstede's theory ofindustrialization and cultural change contained in his explanation of individualism and collectivism, the paper proposes that countries which are in the earlier stages of industrialization have a common culture that governs organizational...

  1. Commercial and Industrial Wiring.

    Science.gov (United States)

    Kaltwasser, Stan; Flowers, Gary

    This module is the third in a series of three wiring publications, includes additional technical knowledge and applications required for job entry in the commercial and industrial wiring trade. The module contains 15 instructional units that cover the following topics: blueprint reading and load calculations; tools and equipment; service;…

  2. Industrial separation processes : fundamentals

    NARCIS (Netherlands)

    Haan, de A.B.; Bosch, Hans

    2013-01-01

    Separation processes on an industrial scale comprise well over half of the capital and operating costs. They are basic knowledge in every chemical engineering and process engineering study. This book provides comprehensive and fundamental knowledge of university teaching in this discipline,

  3. Industrial Education. "Small Engines".

    Science.gov (United States)

    Parma City School District, OH.

    Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

  4. Koeberg - An industry perspective

    Energy Technology Data Exchange (ETDEWEB)

    Birch, C P [Industrial Machinery Supplies (Pty) Ltd. (IMS), Wendywood (South Africa)

    1990-06-01

    Many local organisations participated in the Koeberg power station project. This paper seeks to present a perspective of this from South African industry. It covers the extent of local participation, lessons learned and changes which should be considered for optimising local input into a similar project in the future. (author)

  5. Spanish nuclear industry

    International Nuclear Information System (INIS)

    1994-01-01

    In this book published to commemorate the twentieth anniversary of the Spanish Nuclear Society, it is included a report on the Spanish Nuclear Industry. The Spanish Companies and Organizations in nuclear world are: CIEMAT, Empresarios Agrupados, ENRESA, ENUSA, ENDESA, Grupo Iberdrola, LAINSA, INITEC AND TECNATOM. Activities, history and research programs of each of them are included

  6. Moving up in industry.

    Science.gov (United States)

    Covell, Charlotte

    2016-01-23

    Charlotte Covell is commercial business manager at Virbac UK, a role that gives her responsibility for the company's sales to corporate practices, some buying groups and internet pharmacies. She began her career as a veterinary nurse, but moved into industry and now has a role in senior business management. British Veterinary Association.

  7. The world petroleum industry

    International Nuclear Information System (INIS)

    Mons, L.

    2005-01-01

    This study proposes a global vision of the petroleum industry, a precise and well argued state of the art of the petroleum markets. It defines the strategical challenges which the petroleum companies are exposed and allows to anticipate the sector evolutions. It details the key acts of the last three years, the financial performances of the companies. (A.L.B.)

  8. Koeberg - An industry perspective

    International Nuclear Information System (INIS)

    Birch, C.P.

    1990-01-01

    Many local organisations participated in the Koeberg power station project. This paper seeks to present a perspective of this from South African industry. It covers the extent of local participation, lessons learned and changes which should be considered for optimising local input into a similar project in the future. (author)

  9. Safety in construction industry

    International Nuclear Information System (INIS)

    Khan, A.M.

    1979-01-01

    Causative factors of accidents in construction industry in the context of experience of construction work of the Rajasthan Atomic Power Project are enumerated. The aspect of accident cost - direct and indirect - is discussed briefly. Setting up of a safety set-up at construction sites is emphasized and principles which should guide the accident prevention programme are spelt out. (M.G.B.)

  10. European Industry, 1700 - 1870

    NARCIS (Netherlands)

    Broadberry, Stephen; Fremdling, Rainer; Solar, Peter M.

    2008-01-01

    This paper offers an overview of the development of European industry between 1700 and 1870, drawing in particular on the recent literature that has emerged following the formation of the European Historical Economics Society in 1991. The approach thus makes use of economic analysis and quantitative

  11. Radioisotopes in Industry

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Philip S. [Oak Ridge National Laboratory; Fuccillo, Jr., Domenic A. [Oak Ridge National Laboratory; Gerrard, Martha W. [Oak Ridge National Laboratory; Lafferty, Jr., Robert H. [Oak Ridge National Laboratory

    1967-05-01

    Radioisotopes, man-made radioactive elements, are used in industry primarily for measuring, testing and processing. How and why they are useful is the subject of this booklet. The booklet discusses their origin, their properties, their uses, and how they may be used in the future.

  12. Recent developments: Industry briefs

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is the February 1992 'Industry Briefs' portion of the 'Recent Developments' section. Issues mentioned are: (1) closure of San Onofre Unit 1, (2) start-up of Penly Unit 2, (3) signing of a safeguards agreement with North Korea, (4) Canadian nuclear activities in Romania, and (5) the merger of two Japanese fuel cycle companies

  13. Natural gas industry regulations

    International Nuclear Information System (INIS)

    Clo, A.

    1999-01-01

    In the reception of the EU Directive on the internal gas market, it is quite necessary to avoid the mistakes already made in the case of electricity. A possible cause is there suggested which may help rearrange the natural gas industry and market in Italy. It's four points are: general interests, national peculiarities, public policies, regulatory framework [it

  14. China in World Industrialization

    NARCIS (Netherlands)

    XU, Yi; van Leeuwen, Bas

    2016-01-01

    Combining the sectoral accounting method of the System of National Accounts (SNA) with new statistical materials from the United Nations, as well as historical research into various countries around the world, this paper arrives at an estimate of value added of Chinese and world industries between

  15. Industry information service

    International Nuclear Information System (INIS)

    Yigit, Ipek

    1993-01-01

    BNF is the UK nuclear industry's representative organisation and its membership is inclusive of the entire civil nuclear industry in the Britain. BNF members include Britain's two nuclear electricity generating companies, Nuclear Electric and Scottish Nuclear, who between them manage the seventeen nuclear power stations which provide approximately 20% of the country's generating capacity. An important role of the Forum is to act as the information centre for the industry as a whole and during 1992, the Forum has strengthened its information service with the setting up of an extensive, computer-based network. The network has been established to provide an effective way of managing UK domestic nuclear-related issues and for maximising the news value of our industry's achievements. Equally important is the service's role as an international source of information - particularly when nuclear incidents occur outside the UK. The Forum also acts as an international exchange centre, disseminating technical information, for example, and by promptly providing accurate and comprehensive information to minimise the potential damage to public confidence in nuclear power generation which may be caused by any reported nuclear incidents. Recent examples of the successful operation of the BNF information service and its communications network have been the Leningradskya incident in March 1992 and the hurricane Andrew situation which developed at the end of August 1992

  16. 2003 Industry Studies: Shipbuilding

    Science.gov (United States)

    2003-01-01

    because the industry is too expensive to sustain in peacetime. Corporate income tax on the revenue from trade shipping, income tax on mariners...Act. This legislation would accomplish at least four initiatives: (1) replace the corporate income tax on US-flagged shipping revenue with a flat

  17. Nuclear industry and territories

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2016-01-01

    Nuclear industry being composed of plants, laboratories, nuclear power stations, uranium mines, power lines and fluxes of materials from one facility to another is a strong shaper of the national territory. Contrary to other European countries, French nuclear industry is present all over the national territory. In 64 departments out of 101 there is at least one enterprise whose half of the revenues depends on nuclear activities. The advantage of such a geographical dispersion is when a nuclear activity is given up the social impact is less important: people tend to find a new job in the same region. French Nuclear power plants are generally set in remote places where population density is low and being the first employer by far of the area and being a major contributor to the city revenues, they are perceived as a key element the local population is proud of. In Germany, nuclear power plants are set inside dense industrial regions and appear as an industry just like any other.(A.C.)

  18. Air Pollution and Industry.

    Science.gov (United States)

    Ross, R. D., Ed.

    This book is an authoritative reference and practical guide designed to help the plant engineer identify and solve industrial air pollution problems in order to be able to meet current air pollution regulations. Prepared under the editorial supervision of an experienced chemical engineer, with each chapter contributed by an expert in his field,…

  19. Perspectives on industry restructuring

    International Nuclear Information System (INIS)

    Konow, H. R.

    1996-01-01

    An industry association perspective on restructuring in the electrical industry was offered, placing the ongoing debate about deregulation and competition in the industry in Ontario into a Canadian and a global context. It was found that the move towards deregulation was a global phenomenon, fuelled by the emergence of increasingly open and highly competitive global markets, heightened consumer expectations, and new technologies and convergence. Examples from the U.K., Norway, Australia, New Zealand and the United States were cited to indicate the spread of this trend. Canadian utilities, among them B.C. Hydro, Nova Scotia Power and the Alberta utilities being prime examples, also have restructured recently into separate generation, transmission, distribution and consumer service units to better react to changing market needs. Alliances with other utilities or competitors in the energy sector to pursue business opportunities outside traditional markets, are also not uncommon. Therefore, it was only a question of time for Ontario Hydro, the largest Canadian electric utility, to come under public pressure to follow the national and global trend. The MacDonald Committee recommendations provide the foundation for radical change for the industry. If and when implemented, they could have a major impact on how the electricity sector in Canada will operate in the years to come. Sound decisions by the Ontario government as to the appropriate regulatory model may also determine the province's ability to compete in the unfolding restructuring of electricity markets throughout North America

  20. 2012 Mask Industry Survey

    Science.gov (United States)

    Malloy, Matt; Litt, Lloyd C.

    2012-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.